National Library of Energy BETA

Sample records for designated noxious weeds

  1. Appendix M Cover - Noxious Weeds

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B (K) P Clematis vitalba old man's beard Class C* Class C Class B (K) Conium maculatum poison hemlock Class B* Class B P Class B (K) Convolvulus arvensis bindweed, field Class C*...

  2. DEPARTMENTS INVOLVED WITH WEED RESEARCH AND EDUCATION

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    for yellow toadflax biocontrol, David Weaver Identifying and testing candidate agents for Russian olive to suppress spotted knapweed? Jeff Mosley Determining the efficacy of biocontrol using Mecinus janthinus biocontrol, David Weaver Memorize, recognize, prioritize: Noxious weed education action program, Jane

  3. Criterion for burner design in thermal weed control 

    E-Print Network [OSTI]

    Gonzalez, Telca Marisa

    2001-01-01

    A covered infrared burner was designed and constructed so that it could be compared to an open-flame burner. Two covered burners, a high configuration and a low configuration, were constructed. A low configuration covered infrared burner, high...

  4. Clean Diesel: Overcoming Noxious Fumes

    E-Print Network [OSTI]

    Brodrick, Christie-Joy; Sperling, Daniel; Dwyer, Harry A.

    2001-01-01

    Clean Diesel: Overcoming NoxiousFumes Are diesel engines part of the problem or part of theS T H E T R U T H about diesel engines? Are they inherently

  5. The economic impacts of noxious facilities on wages and property values: An exploratory analysis

    SciTech Connect (OSTI)

    Nieves, L.A.; Hemphill, R.C.; Clark, D.E.

    1991-05-01

    Recent assessments of socioeconomic impacts resulting from the location of potentially hazardous facilities have concentrated on the issue of negative public perceptions and their resulting economic consequences. This report presents an analysis designed to answer the question: Can economic impacts resulting from negative perceptions of ``noxious facilities`` be identified and measured? To identify the impacts of negative perceptions, data on noxious facilities sited throughout the United States were compiled, and secondary economic and demographic data sufficient to analyze the economic impacts on the surrounding study areas were assembled. This study uses wage rate and property value differentials to measure impacts on social welfare so that the extent to which noxious facilities and their associated activities have affected surrounding areas can be determined.

  6. The economic impacts of noxious facilities on wages and property values: An exploratory analysis

    SciTech Connect (OSTI)

    Nieves, L.A.; Hemphill, R.C.; Clark, D.E.

    1991-05-01

    Recent assessments of socioeconomic impacts resulting from the location of potentially hazardous facilities have concentrated on the issue of negative public perceptions and their resulting economic consequences. This report presents an analysis designed to answer the question: Can economic impacts resulting from negative perceptions of noxious facilities'' be identified and measured To identify the impacts of negative perceptions, data on noxious facilities sited throughout the United States were compiled, and secondary economic and demographic data sufficient to analyze the economic impacts on the surrounding study areas were assembled. This study uses wage rate and property value differentials to measure impacts on social welfare so that the extent to which noxious facilities and their associated activities have affected surrounding areas can be determined.

  7. Weed Management Costs, Weed Best Management Practices, and The Roundup Ready Weed Management Program

    E-Print Network [OSTI]

    Mitchell, Paul D.

    Weed Management Costs, Weed Best Management Practices, and The Roundup Ready® Weed Management-commercial purposes by any means, provide that this copyright notice appears on all such copies. #12;1 Weed Management Costs, Weed Best Management Practices, and The Roundup Ready® Weed Management Program T.M. Hurley

  8. Integrated Weed Control for Land Stewardship at Legacy Management's Rocky Flats Site in Colorado - 13086

    SciTech Connect (OSTI)

    Nelson, Jody K.

    2013-07-01

    Land stewardship is one of nine sustainability programs in the U.S. Department of Energy's Environmental Management System. Land stewardship includes maintaining and improving ecosystem health. At the Rocky Flats Site near Westminster, Colorado, land stewardship is an integral component of the Office of Legacy Management's post-closure monitoring and management at the site. Nearly 263 hectares (650 acres) were disturbed and re-vegetated during site cleanup and closure operations. Proactive management of revegetation areas is critical to the successful reestablishment of native grasslands, wetlands, and riparian communities. The undisturbed native plant communities that occur at the site also require active management to maintain the high-quality wetlands and other habitats that are home to numerous species of birds and other wildlife such as elk and deer, rare plant communities, and the federally listed threatened Preble's meadow jumping mouse. Over the past several decades, an increase of Noxious weeds has impacted much of Colorado's Front Range. As a result, weed control is a key component of the land stewardship program at Rocky Flats. Thirty-three species of state-listed Noxious weeds are known to occur in the Central and Peripheral Operable Units at Rocky Flats, along with another five species that are considered invasive at the site. Early detection and rapid response to control new invasive species is crucial to the program. An integrated weed control/vegetation management approach is key to maintaining healthy, sustainable plant communities that are able to resist Noxious weed invasions. Weed mapping, field surveys, and field-staff training sessions (to learn how to identify new potential problem species) are conducted to help detect and prevent new weed problems. The integrated approach at Rocky Flats includes administrative and cultural techniques (prevention), mechanical controls, biological controls, and chemical controls. Several species of biocontrol insects have been released to assist with control of different target weed species. Monitoring is conducted to evaluate the effectiveness of control efforts and to provide information for future control efforts. The effective implementation of this integrated approach has reduced the infestation levels of many species and has kept several newly discovered invasive species from spreading and becoming larger problems at the site. (authors)

  9. Gille-STPA 35 1 Noxious Algae in Carlsbad

    E-Print Network [OSTI]

    Gille, Sarah T.

    Gille-STPA 35 1 Noxious Algae in Carlsbad Spanish explorers of this region came across a lagoon Woodfield Dubbed "killer algae," the alien seaweed Caulerpa taxifolia was discovered in June 2000. Caulerpa taxifolia is a green alga native to tropical waters that typically grows to small size

  10. Internal combustion engine system and method with reduced noxious emissions

    SciTech Connect (OSTI)

    Munk, M.

    1988-03-22

    For use in conjunction with a combustion-based system including a combustion chamber having an exhaust, a source of input air and a source of fuel for providing input air and fuel to the combustion chamber, and means communicating with the combustion chamber for obtaining power from the combustion; the improvement is described comprising: an ultrasonic fogging device communicating with the input air, the fogging device being adapted to receive a fogger air supply and fogger water supply, and to generate a fog in the source of input air which has a droplet size of the order of ten microns or less, and evaporates to dryness in the input air; means for sensing noxious emissions in exhaust gases from the combustion chamber; and means for controlling the fogging device in accordance with the sensed noxious emissions.

  11. Internal combustion engine system and method with reduced noxious emissions

    SciTech Connect (OSTI)

    Munk, M.

    1987-05-26

    An improved turbine apparatus is described comprising: a turbine power generator, including a source of input air, and a source of fuel, a compressor which receives the input air, a combustion chamber which receives air from the output of the compressor and fuel from the source of fuel, a turbine which receives exhaust gases from the combustion chamber; and an electrical generator mechanically coupled with the turbine. A fogging device communicates with the input air. The fogging device is adapted to receive a fogger air supply and a fogger water supply, and to generate a fog in the input air; means for sensing noxious emissions in the exhaust gases; and means for controlling the fogging device in accordance with the sensed noxious emissions.

  12. Weed Management in Organic Crops

    E-Print Network [OSTI]

    Guiltinan, Mark

    Weed Management in Organic Crops Research Results Update Bill Curran Penn State University #12;Weed management tactics for organic production · Crop rotation · Cover crops - dead mulches and green manures · Primary and secondary tillage · Irrigation and drainage · Crop residue management · Planting date

  13. FIELD CROPS 2012 Weeds: Corn 5-53

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    in Delmarva corn production. To be successful in controlling weeds in corn, the weed control program must this record to plan your weed control program. Cultural control. Several aspects of cultural weed control should be considered in planning a corn weed control program. These include weed-free seed, cover crops

  14. ENVIRONMENTAL REVIEW FOR CATEGORICAL EXCLUSION DETERMINATION

    Office of Environmental Management (EM)

    engineered organisms, synthetic biology, X governmentally designated noxious weeds, or invasive species, unless the proposed activity would be contained or confined in a manner...

  15. ENVIRONMENTAL REVIEW FOR CATEGORICAL EXCLUSION DETERMINATION

    Office of Environmental Management (EM)

    engineered organisms, synthetic X biology, governmentally designated noxious weeds, or invasive species, unless the proposed activity would be contained or confined in a manner...

  16. ENVIRONMENTAL REVIEW FOR CATEGORICAL EXCLUSION DETERMINATION

    Office of Environmental Management (EM)

    engineered organisms, synthetic biology, X govemmentally designated noxious weeds, or invasive species, unless the proposed activity would be contained or confined in a manner...

  17. Suggestions for Weed Control in Sorghum 

    E-Print Network [OSTI]

    Baumann, Paul A.; Coffman, Cloyce G.

    2001-05-04

    is under growth stress because of drought, cold weather, water-logged soils, etc. Consult the Peak ? label for further precautions and restrictions. Annual broadleaf weed control and some grasses (refer to label for specific weeds controlled) atrazine 4L... for specific weeds controlled) MCPA ? Several manufacturers 3.0 pts. Postemergence when crop is 6 to 12 inches tall but before boot stage. Apply before weeds are 5 inches tall. Avoid cultivation after treatment while sorghum is brittle. Hybrids vary...

  18. Using weeds to fight wastes

    SciTech Connect (OSTI)

    1992-10-01

    Researchers at Los Alamos National Laboratory and New Mexico State University have discovered that jimson weed and wild tomato plants can remove the toxic wastes in wastewater associated with the production of trinitrotoluene (TNT). According to Wolfgang F. Mueller of New Mexico State, tissue-cultured cells of jimson weed rapidly absorb and break down toxic and carcinogenic elements in {open_quotes}pink water,{close_quotes} a by-product of the manufacture of TNT. Mueller and his colleagues have found similar results with the wild tomato plant.

  19. Weed Control Recommendations in Wheat 

    E-Print Network [OSTI]

    Morgan, Gaylon; Baumann, Paul A.; Baughman, Todd; Bean, Brent W.

    2008-06-05

    to label for specific weeds. Apply after 2-leaf stage but before flagleaf is visible. Must be thoroughly mixed with water before adding to liquid nitrogen fertilizer. 2,4-D, MCPA, Clarity, Hoelon, Buctril. Refer to label for additional tankmixes... with water before adding to liquid nitrogen fertilizer. 2,4-D, MCPA, Clarity, Hoelon, Buctril. Refer to label for additional tankmixes. Barley Agility SG with TotalSol (Ally Extra+Dicamba) 1.6?3.2 oz Annual broadleaves: mustards, docks, henbit, kochia...

  20. Weed Control in Texas Pastures. 

    E-Print Network [OSTI]

    Long, John A.; Trew, E. M.

    1958-01-01

    that butyric forms of 2,4-D CP will give good control of curly dock in grass pastures with little damage to pasture I pmes when used at the rate of pound per acre. ipplications made when hop and white clover on the Trler Experiment Station were 2 to 3... inches high re- ' !lted in little injury to the clover. The control of dock cellent when the weeds were sprayed in the ; stage. Temperatures at the time of treatment $,,, ,,,out 50 degrees F. - I per , :~cnt, A1 1 :try smal I ) ti\\'es anc , TCA...

  1. Neuroscience Letters 392 (2006) 159164 Noxious heat induces fMRI activation in two anatomically

    E-Print Network [OSTI]

    Chabris, Christopher F.

    2006-01-01

    Neuroscience Letters 392 (2006) 159­164 Noxious heat induces fMRI activation in two anatomically; accepted 7 September 2005 Abstract Using functional magnetic resonance imaging (fMRI) we found were instructed on how to rate their pain intensity during the scan using a standard 11-point Likerts

  2. Safety Topic Chemical Hood General purpose: prevent exposure to toxic, irritating, or noxious chemical

    E-Print Network [OSTI]

    Cohen, Robert E.

    Safety Topic ­ Chemical Hood General purpose: prevent exposure to toxic, irritating, or noxious chemical vapors and gases. A face velocity of 100 feet per minute (fpm) provides efficient vapor capture the better. (T) (F) A chemical hood can be used for storage of volatile, flammable, or odiferous materials

  3. 838 Weed Science 54, SeptemberOctober 2006 Weed Science, 54:838846. 2006

    E-Print Network [OSTI]

    Zhang, Hao

    @uoguelph.ca Robert S. Gallagher Department of Crop and Soil Sciences, Pennsylvania State University, University Park 99164-3144 E. Patrick Fuerst Department of Crop and Soil Sciences, Washington State University, Pullman838 · Weed Science 54, September­October 2006 Weed Science, 54:838­846. 2006 Modeling site

  4. Race, region and risk: An examination of minority proximity to noxious facilities

    SciTech Connect (OSTI)

    Nieves, A.L. [Wheaton Coll., IL (United States)]|[Argonne National Lab., IL (United States); Nieves, L.A. [Argonne National Lab., IL (United States)

    1996-04-01

    The past decade has given rise to terms like environmental racism, eco-racism, and environmental inequities to characterize a disproportional distribution of environmental disamenities among minority communities. Much of the literature supports the contention that racial and ethnic minorities and low-income groups bear a disproportionate burden of risk from hazardous activities and substances in the environment. This study expands the scope of prior studies by employing county-level data for the entire nation and including a broad range of facility types associated with environmental disamenities. In addition, it addresses the issue of the distribution of noxious facilities among white and non-white populations in an attempt to determine the relative exposure to risk among different racial and ethnic groups. In addition, the authors also explore the relative importance of nonurban versus urban residence.

  5. Protecting the Environment Using Integrated Weed Management in Lawns 

    E-Print Network [OSTI]

    Ketchersid, Mary; Baumann, Paul A.

    2008-03-27

    Integrated Pest Management (IPM) can be used to control weeds, keep lawns healthy and protect the environment. This publication explains the steps to take in an IPM program and the importance of calibrating equipment and making proper calculations...

  6. Introduction Weed control is of fundamental importance when planting trees, particularly

    E-Print Network [OSTI]

    control measures than trees planted in infertile areas. This is because the land is likely to contain form of mechanical weeding. It is also better to weed early rather than delay treatment as inclement

  7. Evolution of Weediness and Invasiveness: Charting the Course for Weed Genomics

    E-Print Network [OSTI]

    Rieseberg, Loren

    Evolution of Weediness and Invasiveness: Charting the Course for Weed Genomics C. Neal Stewart, Jr and their evolution remain poorly understood, but genomic approaches offer tremendous promise for elucidating these important features of weed biology. However, the genomic tools and resources available for weed research

  8. `Raising the bar': improving the standard and utility of weed

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    Meetings `Raising the bar': improving the standard and utility of weed and invasive plant research around three major themes: plant invasions, herbicide resistance, and climate change impacts. `. . .the each theme. Below, we present some of the more broadly relevant topics of discussion from these themes

  9. RESEARCH ARTICLE Biodegradable mulch instead of polyethylene for weed

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    of biodegradable plastic mulch, black, 15 m, (6) oxo-degradable plastic mulch, black, 15 m, (7) paper mulch, black mulches and PE ranging between 80% and 100% for all of them; also, yield was similar for all plasticRESEARCH ARTICLE Biodegradable mulch instead of polyethylene for weed control of processing tomato

  10. Effect of Picloram and Tebuthiuron on Broadleaf Weeds and Bermudagrass in East-Central Texas Pastures. 

    E-Print Network [OSTI]

    Bovey, R.W.; Meyer, R.E.; Baur, J.R.; Schulte, S.V.

    1986-01-01

    of Single Application on Weed and Grass Cover ??????????????????????? 6 Effect of Double Application on Weed and Grass Cover ??????????????????????? 8 Results of All Treatments on Weed Population ??????????????????????????????? 9 SUMMARY Pellet and spray... in January 1975 and retreated in July 1975 or treated in March 1975 and retreated in September 1976. Picloram pellets or sprays at 1.12 and 2.24 kg/ha applied in November 1974 and retreated in May 1975 also increased bermudagrass cover. Herbicide injury...

  11. Deleterious activity of cultivated grasses (Poaceae) and residues on soilborne fungal, nematode and weed pests

    E-Print Network [OSTI]

    Stapleton, James J.; Summers, Charles G.; Mitchell, Jeffrey P.; Prather, Timothy S.

    2010-01-01

    on wheat seedlings. Crop Science, 35, 1652–1656. Burgos, N.system with cover crops. Weed Science, 44, 355–361. Cheema,

  12. Weed Mapping in Early-Season Maize Fields Using Object-Based Analysis of Unmanned Aerial Vehicle (UAV) Images

    E-Print Network [OSTI]

    Kelly, Maggi

    2013-01-01

    10 | e77151 Weed Maps with UAV Images References 1. ECPA (of unmanned aerial vehicle (UAV) imagery for rangelandUnmanned Aerial Vehicle (UAV) for Early Site Specific Weed

  13. South Carolina Pest Management Handbook for Field Crops -2015 WEED CONTROL IN PEANUT

    E-Print Network [OSTI]

    Stuart, Steven J.

    South Carolina Pest Management Handbook for Field Crops - 2015 158 WEED CONTROL IN PEANUT Mike;South Carolina Pest Management Handbook for Field Crops - 2015 159 Preplant/Burndown Herbicides for Weed, wild radish, or Carolina geranium. GLYPHOSATE can also be tank-mixed with VALOR or AIM to improve

  14. HOME GROUNDS & ANIMALS 2014 Home Ornamentals: Weed Management in Home Ornamental Beds 4-89

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    mulches: Use of solid black plastic or a landscape fabric improves weed control compared to an organic mulch alone. Solid black plastic is more effective for weed control than the available landscape fabrics. Organic mulches: Pine bark, hardwood bark, pine straw and wood chips are all good for mulching. Watch soil

  15. Effects of polyethylene mulch in a short-rotation, poplar plantation vary with weed-control strategies,

    E-Print Network [OSTI]

    Green, Scott

    Effects of polyethylene mulch in a short-rotation, poplar plantation vary with weed polyethylene mulch (poly mulch) across a range of site conditions, weed-control treatments and genotypes rights reserved. Keywords: Polyethylene mulch; Woody crops; Weed control Forest Ecology and Management

  16. Locoine, the Poisonous Principle of Loco Weed, Astragalus earlei. 

    E-Print Network [OSTI]

    Fraps, G. S. (George Stronach); Carlyle, E. C. (Elmer Cardinal)

    1936-01-01

    . He gives descriptions of the loco plants. Couch (3) prepared from the loco weed Oxytropis lambertii gathered in the vicinity of Raton, New Mexico, a highly toxic fraction in the fil- trate from silicotungstic acid. He was unable to purify..., and the liquid evaporated to about 200 cc to remove alcohol. An excess of basic lead acetate was added in small amounts, small filtered portions being tested from time to time until no more material was precipitated. About 50 cc was required. The precipitate...

  17. While soil-applied herbicides can be quite valuable in weed control, misuse can cause crop injury or failure to control weeds. This guide

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    While soil-applied herbicides can be quite valuable in weed control, misuse can cause crop injury and persistence of soil-applied herbicides. MT200405 AG issued 5/04 D-4 Getting the Most from Soil or cultivation. However, miscalculations in the use of soil- applied herbicides could cause crop injury or fail

  18. 243USDA Forest Service Gen. Tech. Rep. PSW-GTR-160. 1997. Effects of Seedling Protectors andWeed

    E-Print Network [OSTI]

    Standiford, Richard B.

    of the more common products are plastic mesh cages, cylinders made from aluminum window screen, cages. These are rigid, translucent, double-walled plastic cylinders, developed in England and used there for more than to eliminate weeds, including mulch, herbicides, scalping and mowing. Though studies comparing weed control

  19. South Carolina Pest Management Handbook for Field Crops -2015 AQUATIC WEED CONTROL

    E-Print Network [OSTI]

    Stuart, Steven J.

    South Carolina Pest Management Handbook for Field Crops - 2015 301 AQUATIC WEED CONTROL Cory Heaton and the National Pollution Discharge Elimination System (NPDES). Aquatic pesticide applicators may be required to submit a Notice of Intent (NOI), practice Integrated Pest Management (IPM), and develop a Pesticide

  20. Tolerance and weed management systems in imidazolinone tolerant corn (Zea mays L.) 

    E-Print Network [OSTI]

    Thompson, Ann Marie

    1999-01-01

    ) Field Laboratory, near College Station TX, and at TP Farms, near Waller TX. Different imidazolinone herbicide treatments were applied to imidazolinone tolerant corn between the 2- to 3- and 6- to 8- leaf stage at 36 and 72 pa/ha to evaluate weed control...

  1. WEED INFESTATIONS ARE GENERALLY MORE frequent along roadsides and other disturbed areas than

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    in adjacent land, possibly because vehicles spread seeds into these areas and such areas provide suitable habitats for weed growth. Many types of vehicles, including passenger cars, 4-wheel drive (4WD) trucks, agricultural implements, tracked vehicles and all- terrain vehicles (ATVs) have been found to pick up seeds

  2. Refinement of weed risk assessments for biofuels using Camelina sativa as a model species

    E-Print Network [OSTI]

    Lawrence, Rick L.

    Refinement of weed risk assessments for biofuels using Camelina sativa as a model species Philip B and Environmental Sciences, Montana State University, PO Box 173120, Bozeman, MT 59717-3120, USA Summary 1. Biofuel. However, concerns have been raised on the invasiveness of biofuel feedstocks. Estimating invasion

  3. Data Weeding Techniques Applied to Roget's Thesaurus Uta Priss, L. John Old

    E-Print Network [OSTI]

    Old, L. John

    Data Weeding Techniques Applied to Roget's Thesaurus Uta Priss, L. John Old Napier University, such as Roget's Thesaurus, because the data sources tend to be large and complex. This paper discusses a va, first, in general and then with respect to Roget's Thesaurus. The aim is that resulting lattices should

  4. Data Weeding Techniques Applied to Roget's Thesaurus Uta Priss, L. John Old

    E-Print Network [OSTI]

    Priss, Uta

    Data Weeding Techniques Applied to Roget's Thesaurus Uta Priss, L. John Old Edinburgh Napier, such as Roget's Thesaurus, because the data sources tend to be large and complex. This paper discusses a va, first in general, and then with respect to Roget's Thesaurus. The aim is that resulting lattices should

  5. with input from Rich Zollinger, NDSU Weed Science Herbicides to Complement Glyphosate

    E-Print Network [OSTI]

    Minnesota, University of

    with input from Rich Zollinger, NDSU Weed Science Herbicides to Complement Glyphosate Common Giant the herbicide binds to control a plant Note: strengths and weakness and PRO's and CON's of PRE's such as crop injury potential under cool/wet conditions Note: problems with timing, crop injury potential, and vol

  6. Herbicidal Activity of Mustard Seed Meal on Weed and Vegetable Emergence 

    E-Print Network [OSTI]

    Wang, Xi

    2014-11-21

    to determine the herbicidal activity of MSMs (Sinapis alba ‘IdaGold’ and Brassica juncea ‘Pacific Gold’) on weed and vegetable emergence. In Expt. 1, MSMs were applied at 0, 50, 100, 200 or 300 g/m2 to the bottom of petri dishes and covered with germination mix...

  7. Establishing criteria for the design of a combination parallel and cross-flaming covered burner 

    E-Print Network [OSTI]

    Stark, Christopher Charles

    2003-01-01

    A burner was designed and constructed to combine weed control practices of parallel and cross-flaming with the technology of covers and insulation. It involved two covers designed to be placed on the sides of a crop row. The flame under the covers...

  8. Clean Diesel: Overcoming Noxious Fumes

    E-Print Network [OSTI]

    Brodrick, Christie-Joy; Sperling, Daniel; Dwyer, Harry A.

    2001-01-01

    emissions and by low diesel-fuel prices, relatively gentleand the absence of diesel fuel price terize and measureattraction where diesel fuel prices are lower than gasoline

  9. Clean Diesel: Overcoming Noxious Fumes

    E-Print Network [OSTI]

    Brodrick, Christie-Joy; Sperling, Daniel; Dwyer, Harry A.

    2001-01-01

    quiet as gasoline engines. And freight companies rely almoststandards as gasoline cars. A few companies have technology

  10. Western Society of Weed Science, Albuquerque, New Mexico. March 10-12, 2009. Skurski TC, Maxwell, BD, and Rew LJ

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    significant environmental correlates with NIS impact and response to treatment will help guide weed management Community and Environmental Covariates of Non-Indigenous Plant Impacts Tanya C. Skurski, Lisa J. Rew, Bruce. If a significant relationship exists between environmental variables or biotic conditions and impact, knowledge

  11. Role of Soil Disturbances in Determining Post-Harvest Plant1 Biodiversity and Invasive Weed Distributions2

    E-Print Network [OSTI]

    ) disturbance frequency, and (4) the severity9 of the disturbance. Both frequency and severity are important1 Role of Soil Disturbances in Determining Post-Harvest Plant1 Biodiversity and Invasive Weed Telephone: +01-928-556-2176, FAX +01-928-556-21308 9 SHORT TITLE: Soil Disturbances, Biodiversity

  12. Design Editorial Design Innovation

    E-Print Network [OSTI]

    Papalambros, Panos

    juxtaposition of innovation versus invention: "Invention is the first occurrence of an idea for a new product such as innovation strategies, product design, service inno- vation, cutting-edge designers, design awards, and green design. Much of that perspective on innovation is then tied to industrial or product design, often

  13. Design Editorial Design Intent

    E-Print Network [OSTI]

    Papalambros, Panos

    Journal of Mechanical Design Editorial Design Intent Is this paper suitable for JMD of criteria to answer the question. As editor of JMD, apart from the obvious criteria of quality and research assumed my editorial duties is the paper's design intent. It was in that spirit that I wrote the Design

  14. Collaboration, Consultation, Communication The Environmental Process in Calm and Crisis. Mn/DOT Environmental Stewardship & Streamlining Workshop

    E-Print Network [OSTI]

    Minnesota, University of

    paint removals Bird buffer zones Turtle crossing/fence Plan locations Pay items/estimated quantities.0150 Hazardous, toxic materials Demolition Disposals Agriculture Noxious Weeds DNR Public waters Dewatering

  15. Design for manufacturability Design verification

    E-Print Network [OSTI]

    Patel, Chintan

    ITRS Design #12;Design · Design for manufacturability · Design verification #12;Design for Manufacturability · Architecture challenges · Logic and circuit challenges · Layout and physical design challenges · Expected to be the source of multiple DFM challenges · Invest in variability reduction or design

  16. Evaluation of auxinic herbicides for broadleaf weed control, tolerance of forage bermudagrass hybrids [Cynodon dactylon (L.) Pers.], and absorption and translocation in common ragweed (Ambrosia artemisiifolia L.) 

    E-Print Network [OSTI]

    Moore, Frederick Thomas

    2005-08-29

    chemical families, including the phenoxyalkanoic and pyridinecarboxylic acids, and are referred to as the phenoxy and pyridine herbicide families, respectively. These herbicides have the ability to act on susceptible broadleaf plants because... + fluroxypyr (1:1) at 0.28 kg a.e./ha was required. Western horsenettle (Solanum dimidiatum Raf.) and silverleaf nightshade (Solanum elaeagnifolium Cav.), both members of the Solanaceae family, have become major weeds in both permanent pasture and row...

  17. Occurrence and Management of Glyphosate Resistant Amaranthus Weed Species in Central Texas Cotton and Evaluation of Spray Droplet Size Spectra as Affected by Nozzle Design and Herbicide Formulation 

    E-Print Network [OSTI]

    McGinty, Joshua Allan

    2014-08-28

    , also a member of the dioecious subgenus Acnida, is native to North America and is currently found in the Midwestern United States from Illinois and southern Michigan in the north, to Texas and Louisiana in the south (Horak et al. 1994; Pratt et al... be influenced by environmental conditions. Ellis and Griffin (2002) found that sublethal rates of 140 g ha-1 glyphosate and 53 g ha-1 glufosinate applied at several growth stages from 3-leaf to early bloom resulted in maximum visual injury values of 16...

  18. WILDLAND WEEDS 19 Introduction

    E-Print Network [OSTI]

    Ling, Sharon Ewe Mei

    " (small fruit orchards) were examined. Ewe and her partners traveled approximately 600 km in the urban

  19. Engitectural Design 

    E-Print Network [OSTI]

    Gagliardi, D. R.

    1996-01-01

    to the mechanical systems of building, and in a hot and humid climate the issues are magnified. Therefore, this paper will discuss the concepts and merits of a new design process called: Engitectural Design. Engitectural Design is the concept of blending the many...

  20. Mechanizing Exploratory Game Design

    E-Print Network [OSTI]

    Smith, Adam Marshall

    2012-01-01

    Game Design . . . . . . . . . . . . . . . . . . . . . . . .1.4.1 Designlevel Design Spaces . . . . . . . . . . . . . . . . . . . .

  1. Weed Mapping in Early-Season Maize Fields Using Object-Based Analysis of Unmanned Aerial Vehicle (UAV)

    E-Print Network [OSTI]

    Kelly, Maggi

    (UAV) Images José Manuel Peña1* , Jorge Torres-Sánchez1 , Ana Isabel de Castro1 , Maggi Kelly2 of remote imagery captured by unmanned aerial vehicles (UAV) has tremendous potential for designing detailed) procedure was developed on a series of UAV images using a six-band multispectral camera (visible and near

  2. Design Rational

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent BondingMeeting |Design Competitions Design Competitions National9

  3. Design Editorial Design Analysis and Synthesis

    E-Print Network [OSTI]

    Papalambros, Panos

    Journal of Mechanical Design Editorial Design Analysis and Synthesis What is design? Why is design to call it simply design analysis. If a design exists, I can analyze its behavior. Based on the results of the analysis, I may have to modify the design to make it fit better to my purpose. The implication of analysis

  4. Meta-Design--Design for Designers Gerhard Fischer

    E-Print Network [OSTI]

    Fischer, Gerhard

    1 Meta-Design--Design for Designers Gerhard Fischer Center for LifeLong Learning and Design (L3 D-0430 USA gerhard@cs.colorado.edu Eric Scharff Center for LifeLong Learning and Design (L3 D) Department scharffe@cs.colorado.edu ABSTRACT One fundamental challenge for the design of the interactive systems

  5. Communicating Design Research Effectively

    E-Print Network [OSTI]

    Roschuni, Celeste Nicole

    2012-01-01

    5.3 Persuasion in Design . . . . . . . . . . . . . .2 Design Process andCommunication 2.1 Design Process Models . . . . . . . . .

  6. 2011 Annual Ecological Survey: Pacific Northwest National Laboratory Site

    SciTech Connect (OSTI)

    Becker, James M.; Chamness, Michele A.

    2012-02-27

    The U.S. Department of Energy (DOE) Pacific Northwest Site Office (PNSO) oversees and manages the DOE contract for the Pacific Northwest National Laboratory (PNNL), a DOE Office of Science multi-program laboratory located in Richland, Washington. PNSO is responsible for ensuring that all activities conducted on the PNNL site comply with applicable laws, policies, and DOE Orders. The DOE Pacific Northwest Site Office Cultural and Biological Resources Management Plan (DOE/PNSO 2008) addresses the requirement for annual surveys and monitoring for species of concern and to identify and map invasive species. In addition to the requirement for an annual survey, proposed project activities must be reviewed to assess any potential environmental consequences of conducting the project. The assessment process requires a thorough understanding of the resources present, the potential impacts of a proposed action to those resources, and the ultimate consequences of those actions. The PNNL site is situated on the southeastern corner of the DOE Hanford Site, located at the north end of the city of Richland in south-central Washington. The site is bordered on the east by the Columbia River, on the west by Stevens Drive, and on the north by the Hanford Site 300 Area (Figure 1). The environmental setting of the PNNL site is described in Larson and Downs (2009). There are currently two facilities on the PNNL site: the William R. Wiley Environmental Molecular Sciences Laboratory and the Physical Sciences Facility. This report describes the annual survey of biological resources found on the undeveloped upland portions of the PNNL site. The annual survey is comprised of a series of individual field surveys conducted on various days in late May and throughout June 2011. A brief description of the methods PNNL ecologists used to conduct the baseline surveys and a summary of the results of the surveys are presented. Appendix A provides a list of plant and animal species identified in the upland areas of the PNNL site in 2011. Efforts in 2011 to control noxious weed populations (comprising plant species designated as Class B noxious weeds by the Washington State Noxious Weed Control Board) discovered in 2009 and initially treated with herbicides in 2010 are described in Appendix B.

  7. Design Editorial A Design Societies Federation

    E-Print Network [OSTI]

    Papalambros, Panos

    Journal of Mechanical Design Editorial A Design Societies Federation You can recognize the many faces of design by looking at the many different professional societies that promote design around the world. These societies may have roots in engineering or archi- tecture or industrial design but they all

  8. Applications and Research Using Remote Sensing for Rangeland Management

    E-Print Network [OSTI]

    Hunt Jr., E. Raymond

    - ability of clean water, sequester excess carbon dioxide, main- tain plant and animal diversityApplications and Research Using Remote Sensing for Rangeland Management E. Raymond Hunt, Jr., James remote sensing. Noxious weed infestations can be determined by careful selection of the spatial

  9. G SOUTHWEST FOREST SERVICE

    E-Print Network [OSTI]

    . This soil is well-drained, runoff is medium, and permeabil- ity is moderately rapid. The soil is slightly.). In 1927, the #12;first attempt was made to clear the pasture of this noxious weed, by digging and burning commercially. The seedlings were graded, and only thrifty trees with 8- to 12-inchtops and well developed root

  10. The Prairie Naturalist 43(1/2):3844; June 2011 Corresponding author email address: carol.johnston@sdstate.edu

    E-Print Network [OSTI]

    ; Phragmites in unglaciated western South Dakota usually occurred on creeks and stock dams, stock dam, Prairie Coteau, Black Hills Common reed, Phragmites australis [(Cav.) Trin. ex Steud. (syn Dakota to list the non-native P. australis haplotype M as a noxious weed (South Dakota Rules §12

  11. Dwell on Design [Dispatches

    E-Print Network [OSTI]

    Sullivan, Lisa

    2007-01-01

    ity and commitment to green design can inspire innovationof “product design, prefab, green building practices,modernism and green living. The Dwell on Design conference

  12. Dwell on Design [Dispatches

    E-Print Network [OSTI]

    Sullivan, Lisa

    2007-01-01

    Dwell on Design Lisa Sullivan Since its inception, in 2000,green living. The Dwell on Design conference and show, helds triple theme, of modern design, sustainability, and smart

  13. Embedded Design Guide Embedded Design Guide

    E-Print Network [OSTI]

    Berns, Hans-Gerd

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 DDR SDRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 DDR2 SDRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 DDR3 SDRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Memory System Design

  14. Understanding Design Patterns with Design Rationale Graphs

    E-Print Network [OSTI]

    Baniassad, Elisa

    Understanding Design Patterns with Design Rationale Graphs Elisa Baniassad and Gail C. Murphy christa.schwanninger@mchp.siemens.de ABSTRACT A Design Pattern presents a proven solution to a common design problem using a combination of informal text, diagrams, and examples. Often, to suitably describe

  15. Design wiki: a system for design sharing

    E-Print Network [OSTI]

    Design wiki: a system for design sharing Wael A. Abdelhameed, Yoshihiro Kobayashi #12;Wael of Bahrain. His research areas are 3D Modeling Systems, Computing Architecture, Virtual Reality, Design Process, Visual Design Thinking and Digital and Manual Media Interaction. Yoshihiro Kobayashi is a Faculty

  16. Design Quality Criteria Design Quality Criteria

    E-Print Network [OSTI]

    van Sinderen, Marten

    Design Quality Criteria 19 Chapter 2 Design Quality Criteria This chapter discusses what qualities are desirable of an application protocol design, and what quality criteria can be used when evaluating methodology. The quality criteria presented are not peculiar to application protocol design

  17. Engineering Design DEGREES: Master of Engineering Design

    E-Print Network [OSTI]

    Thompson, Michael

    . Admissions Criteria Masters (M.Eng.Design): The minimum academic requirement for admission is normallyEngineering Design DEGREES: Master of Engineering Design ENTRY DATES: September, January (limited) The W Booth School of Engineering Practice Master of Engineering Design graduate degree program

  18. Early-stage engineering design : the designer, the object of design, and design context

    E-Print Network [OSTI]

    Roan, Earl Taylor

    2008-01-01

    Much of design research has been focused on developing prescriptive design processes, however, proper description of the designer, the object of design, and the context may be lacking (Dorst, 2007). The present research ...

  19. Weed control in tomato seedbeds 

    E-Print Network [OSTI]

    Leeper, Paul W

    1957-01-01

    nanner different to those used by carlscsx (9)x cxeb- tzee and Laiffler (10), Dallynx Sawyer snd Seif (11)x Dsnielscxx (13) ~ snd !8mges (19) ~ Vapast has been used by a nuaber of warksxe (3) to sterilise scd. l well in advance of' plxsxting...

  20. Design Editorial Design: The New Frontier

    E-Print Network [OSTI]

    Papalambros, Panos

    countries with lower labor costs. In a sense, our research and education agenda must transition from a "pure for sustainable growth and innovation, and design is the surest path to realizing it. Design is the new frontier with innovation, as exemplified in frequent references to design in the business press. In the pursuit for sus

  1. Compositional Design of Analog Systems Using Contracts

    E-Print Network [OSTI]

    Sun, Xuening

    2011-01-01

    Background 2.1 DesignDesign . . . . . . . . . . . . . . . . . . . . . . . . . . . . .based Design . . . . . . . . . . . . . . . . . . . . . .

  2. Structural blast design

    E-Print Network [OSTI]

    Kieval, Tamar S. (Tamar Shoshana), 1980-

    2004-01-01

    Blast design is a necessary part of design for more buildings in the United States. Blast design is no longer limited to underground shelters and sensitive military sites, buildings used by the general public daily must ...

  3. Design after Disaster

    E-Print Network [OSTI]

    Cuff, Dana

    2009-01-01

    sense of the term. The design professions have been accusedDesign after Disaster Dana Cuff In the past decade, asAre we to conclude that design is inherently emasculated

  4. Motivational Design Patterns

    E-Print Network [OSTI]

    Lewis, Chris

    2013-01-01

    1.5 Motivational design patterns . . . 1.5.1 Gameful3.2.3 Motivational design pattern definition . . . .3.2.42011). Gamification by Design: Im- plementing Game Mechanics

  5. Locomotive design and construction /

    E-Print Network [OSTI]

    Maris, James Clyde.

    1919-01-01

    . Proportions of Locomotive 20 Comparison of various factors. Boilers 23 Types, boiler performance, details, fire box design and performance, grate design, ash pan design, petti­ coat pipe and front end arrangement, stack design, exhaust nozzle sizes..., fittings and appliances, brick arches. Boiler Making 46 Laying out templates, forming the plates, flange block design, swageblock design, fitting up, testing, firing up. Superheated Steam for Locomotives 58 Modern practice, types of superheaters...

  6. Solar Design Workbook

    SciTech Connect (OSTI)

    Franta, G.; Baylin, F.; Crowther, R.; Dubin, F.; Grace, A., Griffith, J.W.; Holtz, M.; Kutscher, C.; Nordham, D.; Selkowitz, S.; Villecco, M.

    1981-06-01

    This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for the solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.

  7. DOE handbook: Design considerations

    SciTech Connect (OSTI)

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

  8. ENVIRONMENTAL DESIGN CONSULTANTS + LIGHTING DESIGNERS | atelierten.com Sustainable Design

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    ) with DOA energy recovery with 4-pipe VAV & 2nd chilled water heat exchanger 2. Provide hydronic r · Understanding annual sky cover conditions informs design decisions for shading strategies, glazing types

  9. Control system design guide

    SciTech Connect (OSTI)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  10. Designing Asynchronous Microprocessors Design Process Overview

    E-Print Network [OSTI]

    Martin, Alain

    ) Parallel CHP Parallel CHP Sequential CHP informal translation ISA process decomposition process decomposition compilation #15; Design process is a sequence of provably correct transformations. #15; First CHP the CHP decomposition. #15; The design style tends to em- phasize concurrency issues. 2 #12; Sequential

  11. Flexibility in ballpark design

    E-Print Network [OSTI]

    Ressler, Kyle T. (Kyle Thomas)

    2014-01-01

    This thesis documents the potential value of using flexible design to implement Major League Ballparks (MLBP). Credible evidence suggests that most ballparks were designed to fixed specifications that do not facilitate ...

  12. Neighborhood Design and Turnover 

    E-Print Network [OSTI]

    Park, Yun Mi

    2014-12-18

    and magnitudes of neighborhood design elements into structural (i.e., density, land use, housing mix, and street patterns) and ecological design components (i.e., nature, open space, and landscape patterns) in both neighborhoods and contexts. Using five years...

  13. Design of intelligent interiors

    E-Print Network [OSTI]

    Bonanni, Leonardo Amerigo, 1977-

    2005-01-01

    Ubiquitous computing is transforming interior design by allowing utilities, goods and information to be delivered where and when we need them. How will new information technologies impact the design of interior spaces? ...

  14. Explorative structural design

    E-Print Network [OSTI]

    Clune, Rory P. (Rory Patrick)

    2010-01-01

    The thesis proposes a new way of thinking about structural design software. The current state of computational structural design in practice is assessed, and a review of relevant literature and existing software identifies ...

  15. Energy design for architects

    SciTech Connect (OSTI)

    Shaw, A. (ed.)

    1989-01-01

    This book contains techniques for energy efficiency in architectural design. Many aspects are covered including: cost; comfort and health; energy use; the design process; and analytical techniques. 202 figs. (JF)

  16. Landscape Design & Water Quality

    E-Print Network [OSTI]

    Ishida, Yuko

    drainage lines to allow water to filter into surrounding soils. Install gravel sumps or other percolationLandscape Design & Water Quality Landscape Design & Water Quality Create a landscape design that reduces pesticide and fertilizer runoff and conserves water. Good plant choices, proper site preparation

  17. Protein Design Zhilei Chen

    E-Print Network [OSTI]

    Zhao, Huimin

    Protein Design Zhilei Chen Center for Biophysics and Computational Biology, University of Illinois of Illinois, Urbana, Illinois, U.S.A. INTRODUCTION Protein design refers to the ability to alter protein, and selectivity. To overcome this lim- itation, tailor-made biocatalysts must be developed by protein design

  18. Art & Design DAVID CRONRATH

    E-Print Network [OSTI]

    Harms, Kyle E.

    COLLEGE OF Art & Design DAVID CRONRATH Dean C. BARRETT KENNEDY Associate Dean for Graduate Programs, and Student Services THERESA MOONEY Counselor 102 Design Building 225/578-5400 FAX 225/578-5040 The College of Art and Design is a community of engaged students and faculty committed to speculative endeavors

  19. System Design Stage

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-05-21

    This chapter addresses translating the user-oriented functional design specifications into a set of technical, computer-oriented system design specifications; and designing the data structure and processes to the level of detail necessary to plan and execute the Programming and Installation Stages.

  20. Foundation Design Handbook

    SciTech Connect (OSTI)

    Carmody, John; Mosiman, Garrett; Handeen, Daniel; Huelman, Patrick; Christian, Jeffery

    2013-10-01

    The purpose of this handbook is to provide information that will enable designers, builders, and homeowners to understand foundation design problems and solutions. The foundation of a house is a somewhat invisible and sometimes ignored component of the building. It is increasingly evident, however, that attention to good foundation design and construction has significant benefits to the homeowner and the builder, and can avoid some serious future problems. Good foundation design and construction practice means not only insulating to save energy, but also providing effective structural design as well as moisture, termite, and radon control techniques where appropriate.

  1. Design Space Exploration of Parameterized Systems using Design of Experiments

    E-Print Network [OSTI]

    Sheldon, David

    2011-01-01

    10 1.6 Design42 4.3 Pareto point generation using design of experiments (from VPR for a single metric design. . . . . . . . . . . .

  2. Promoting Learning of Instructional Design via Overlay Design Tools

    E-Print Network [OSTI]

    Carle, Andrew Jacob

    2012-01-01

    Meyer, J. (2004). Toolkit design for interactive structuredS. , & McCrickard, D. S. (2010). Making design rationalematter: How design rationale has failed and how it can

  3. Expressive Design Tools: Procedural Content Generation for Game Designers

    E-Print Network [OSTI]

    Smith, Gillian Margaret

    2012-01-01

    J. , 2004. Patterns in Game Design (Game Development Series)2000. The Art and Science of Level Design. Available http://E. , 2004. Game Level Design (Game Development Series),

  4. Lighting Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as part of your whole-house design -- an approach for building an energy-efficient home. Indoor Lighting Design When designing indoor lighting for energy efficiency,...

  5. Lighting Design | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design Lighting Design Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of...

  6. Energy manager design for microgrids

    E-Print Network [OSTI]

    Firestone, Ryan; Marnay, Chris

    2005-01-01

    Energy Manager Design for Microgrids Hillier, F. , and G.Energy Manager Design for Microgrids Appendix A: Smart*DER:Manager Design for Microgrids Prepared for the California

  7. Hard Evidence and Mechanism Design

    E-Print Network [OSTI]

    Watson, Joel; Bull, Jesse

    2006-01-01

    J. , 2003. Contract, mechanism design, and technologicalSeverinov, S. , 2001. Mechanism design and communicationveri?able information and mechanism design. Rev. Econ. Stud.

  8. Hard Evidence and Mechanism Design

    E-Print Network [OSTI]

    Bull, J; Watson, J

    2007-01-01

    J. , 2003. Contract, mechanism design, and technologicalSeverinov, S. , 2001. Mechanism design and communicationveri?able information and mechanism design. Rev. Econ. Stud.

  9. Cooperative Modeling and Design History Tracking Using Design Tracking Matrix 

    E-Print Network [OSTI]

    Kim, Jonghyun

    2010-10-12

    This thesis suggests a new framework for cooperative modeling which supports concurrency design protocol with a design history tracking function. The proposed framework allows designers to work together while eliminating design conflicts...

  10. Race to Zero Design Competition Webinar: Housing Design Best...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Race to Zero Design Competition Webinar: Housing Design Best Practices Race to Zero Design Competition Webinar: Housing Design Best Practices November 18, 2014 1:00PM to 2:30PM EST...

  11. Observations of designer behaviors in complex system design

    E-Print Network [OSTI]

    Austin-Breneman, Jesse

    2011-01-01

    The design of large-scale engineering systems requires design teams to balance a complex set of considerations. Formal approaches for optimizing complex system design assume that designers behave in a rational, consistent ...

  12. Seismic Design Expectations Report

    Office of Environmental Management (EM)

    flood, and lightning. This report only focuses on the seismic design expectations. NPH safety requirements are described in 10 CFR Part 830, Nuclear Safety Management, DOE O...

  13. Mechanizing Exploratory Game Design

    E-Print Network [OSTI]

    Smith, Adam Marshall

    2012-01-01

    machine think? ” [223], Alan Turing revives what is perhapsone day be designed, to Alan Turing’s 1950 hand-simulation

  14. Effective Design Strategies

    Broader source: Energy.gov [DOE]

    As described in the Whole Building Design Guide (WBDG), all Federal agencies are required to follow the Guiding Principles for New Construction and Major Renovations, which include considerations...

  15. Unfolding designable structures

    E-Print Network [OSTI]

    Cristiano L. Dias; Martin Grant

    2005-10-17

    Among an infinite number of possible folds, nature has chosen only about 1000 distinct folds to form protein structures. Theoretical studies suggest that selected folds are intrinsically more designable than others; these selected folds are unusually stable, a property called the designability principle. In this paper we use the 2D hydrophobic-polar lattice model to classify structures according to their designability, and Langevin dynamics to account for their time evolution. We demonstrate that, among all possible folds, the more designable ones are easier to unfold due to their large number of surface-core bonds.

  16. Advanced Energy Design Guides

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to insert energy efficiencies into small-building designs. The 30 percent guides offer a range of recommendations that are intended to provide easy approaches to reducing...

  17. Final Design Completion The Comprehensive Final Design Review1

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    Final Design Completion The Comprehensive Final Design Review1 (CFDR) marks the end of the final (detailed) design phase of system design. At this point, the system design should be defined in drawings and specifications. The CFDR will likely have been preceded by component/subassembly Final Design Reviews (FDRs

  18. Reading context in design

    E-Print Network [OSTI]

    Agrawal, Vivek

    1993-01-01

    This study explores how, in the process of design, the reading of an existing order in the organizing features of a setting potentiates form. For this purpose, a design exercise on a site in the city of Jaipur in India has ...

  19. Concentration in Green Design

    E-Print Network [OSTI]

    Shewchuk, Jonathan

    , energy, infrastructure or transport. Participants in this specialization area work closely with the GreenConcentration in Green Design Research and Education Opportunities Carnegie Mellon University Civil and Environmental Engineering www.ce.cmu.edu M.S. Concentration Green Design - Course Only Track As an extension

  20. Shield Module Design Considerations

    E-Print Network [OSTI]

    McDonald, Kirk

    Shield Module Design Considerations Adam Carroll Van Graves July 3, 2014 #12;2 Managed by UT-Battelle for the U.S. Department of Energy Shield Module Design Considerations 3 July 2014 Overview · Capability to remotely remove and reinstall the shield modules is required · Shield module concept is He-cooled tungsten

  1. Road Design Susan Handy

    E-Print Network [OSTI]

    Handy, Susan L.

    Road Design Susan Handy TTP Orientation Seminar October 2014 #12;Lots of Pavement! #12;Level metro areas Planning Local Planning Public Works Local streets Planning Building Operating Road Design · What are the two main purposes of streets/roads/highways? · What's the main difference between streets

  2. SLC Design Handbook

    SciTech Connect (OSTI)

    Erickson, R

    2004-04-08

    The SLC Design Handbook is intended to be a consistent description of the SLAC Linear Collider project, including explanations of the design criteria and listing the key technical specifications. The precedent set by the PEP Design Handbook during the construction and commissioning of that machine a few years ago leads us to hope that this handbook will have a similar impact on the SLC by serving as a concise and up-to-date reference guide for the design and construction. Many details of the SLC design are not yet firm and can be expected to evolve as the construction proceeds. Thus, we have chosen a 3-ring loose-leaf format and a page numbering scheme to accommodate the addition or replacement of sections as needed. In order to minimize the confusion that could result from the distribution of multiple versions of some sections, each page is marked with a revision data in the upper right corner.

  3. WASTE PACKAGE TRANSPORTER DESIGN

    SciTech Connect (OSTI)

    D.C. Weddle; R. Novotny; J. Cron

    1998-09-23

    The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''.

  4. New Methodologies for Evaluating Design Rules

    E-Print Network [OSTI]

    Gupta, Mukul

    2013-01-01

    Chip-level Design Rule Evaluation . . . . . . . .and Design Interaction . . . . . . . . . . . . . . . . . .27 vi Chip-level Design Rule

  5. Rampressor Turbine Design

    SciTech Connect (OSTI)

    Ramgen Power Systems

    2003-09-30

    The design of a unique gas turbine engine is presented. The first Rampressor Turbine engine rig will be a configuration where the Rampressor rotor is integrated into an existing industrial gas turbine engine. The Rampressor rotor compresses air which is burned in a traditional stationary combustion system in order to increase the enthalpy of the compressed air. The combustion products are then expanded through a conventional gas turbine which provides both compressor and electrical power. This in turn produces shaft torque, which drives a generator to provide electricity. The design and the associated design process of such an engine are discussed in this report.

  6. DESIGN [fabrication] BUILD

    E-Print Network [OSTI]

    Rader, Nicolas Glen

    2006-01-01

    DESIGN [fabrication] BUILD proposes a new relationship among the architect, homeowner, and fabricator/assembler through the use of parametric software in order to create a truly customizable prefabricated home. This ...

  7. Alternative energy design toolkit

    E-Print Network [OSTI]

    Sukkasi, Sittha

    2004-01-01

    This thesis concerns the concepts, structure, and applications of the Alternative Energy Design Toolkit. The toolkit is aimed to provide a widely accessible, easy to use, flexible, yet powerful modeling environment for ...

  8. Communicating Design Research Effectively

    E-Print Network [OSTI]

    Roschuni, Celeste Nicole

    2012-01-01

    design research through documentary film”. In: Symposium onthe research were a documentary film and send it out to thePF uses classic documentary film techniques as a “volume

  9. Design of nanomanufacturing systems

    E-Print Network [OSTI]

    Slocum, Alexander Henry, Jr

    2010-01-01

    Over 100 years of manufacturing knowledge and experience are available to a design engineer when considering the integration of a machine tool enabling macro-scale processes (milling, turning, welding, water-jet cutting) ...

  10. Transformation inverse design

    E-Print Network [OSTI]

    Liu, David

    We present a new technique for the design of transformation-optics devices based on large-scale optimization to achieve the optimal effective isotropic dielectric materials within prescribed index bounds, which is ...

  11. Subsea HIPPS design procedure

    SciTech Connect (OSTI)

    Aaroe, R.; Lund, B.F.; Onshus, T.

    1995-12-31

    The paper is based on a feasibility study investigating the possibilities of using a HIPPS (High Integrity Pressure Protection System) to protect a subsea pipeline that is not rated for full wellhead shut-in pressure. The study was called the Subsea OPPS Feasibility Study, and was performed by SINTEF, Norway. Here, OPPS is an acronym for Overpressure Pipeline Protection System. A design procedure for a subsea HIPPS is described, based on the experience and knowledge gained through the ``Subsea OPPS Feasibility Study``. Before a subsea HIPPS can be applied, its technical feasibility, reliability and profitability must be demonstrated. The subsea HIPPS design procedure will help to organize and plan the design activities both with respect to development and verification of a subsea HIPPS. The paper also gives examples of how some of the discussed design steps were performed in the Subsea OPPS Feasibility Study. Finally, further work required to apply a subsea HIPPS is discussed.

  12. Preliminary Safety Design RM

    Office of Environmental Management (EM)

    Preliminary Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF Pr C CD-1 F ENVIRO Standard R reliminar Rev Critical Decis CD-2 M ONMENTAL Review Plan ry Safety view Module...

  13. METALS DESIGN HANDBOOK DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    9 06 Revision 0 METALS DESIGN HANDBOOK DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States...

  14. Relationships in design build

    E-Print Network [OSTI]

    Wampler, Charles Wilson

    2010-01-01

    As design build (DB) becomes more popular, different ways of writing contracts and forming relationships with the various parties are being considered. The main point of this paper is to look at the relationships between ...

  15. Cogeneration System Design Options 

    E-Print Network [OSTI]

    Gilbert, J. S.

    1985-01-01

    The commercial or industrial firm contemplating cogeneration at its facilities faces numerous basic design choices. The possibilities exist for fueling the system with waste materials, gas, oil, coal, or other combustibles. The choice of boiler...

  16. Neighborhood design for Cambridge

    E-Print Network [OSTI]

    Reynolds, Margaret (Margaret Philpott Ray), 1953-

    1981-01-01

    This thesis examines the problem of modest high-density low-rise housing design for a site in Cambridge, Massachusetts. It considers first the general changes in housing demand and the housing industry which have made it ...

  17. 1 Design by Autonomous Learning Design by Autonomous Learning

    E-Print Network [OSTI]

    Prabhakar, Sattiraju

    1 Design by Autonomous Learning Design by Autonomous Learning: Modeling Environment for Design Box 123, Broadway NSW 2007, Australia Email: {prabhakar, gjsmith}@socs.uts.edu.au 1. Design by Autonomous Learning An important area of expertise robots can provide is design of artefacts in physical

  18. Improving Design with Agents, Improving Agents by Design

    E-Print Network [OSTI]

    Brown, David C.

    DCB 1 WPI Improving Design with Agents, or, Improving Agents by Design David C. Brown AI in Design ASSUMPTION Ã? Assume that the design environment is built using agents. i.e., situated, autonomous, flexible Ã?'s future design and synthesis environment will be built as a real multi-agent system. In what follows, we

  19. DESIGN OPERATORS TO SUPPORT ORGANIZATIONAL DESIGN CATHOLIJN M. JONKER

    E-Print Network [OSTI]

    Treur, Jan

    DESIGN OPERATORS TO SUPPORT ORGANIZATIONAL DESIGN CATHOLIJN M. JONKER Division Cognitive. Organizational design is an important topic in the literature on organizations. Usually the design principles are addressed informally in this literature. This paper makes a first attempt to formally introduce design

  20. Task-Centered Design User-Centered Design

    E-Print Network [OSTI]

    Golub, Evan

    . · Possibly in very specific niche markets. ­ Realistic example tasks; concrete, detailed scenario examples1 Task-Centered Design User-Centered Design Image credit: http://worrydream.com/ABriefRantOnTheFutureOfInteractionDesign/ #12;2 Task and User Centered Design When designing new hardware and/or software, it is important

  1. Design | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent BondingMeeting |Design Competitions Design

  2. PILOT: design and capabilities

    E-Print Network [OSTI]

    W. Saunders; P. R. Gillingham; A. J. McGrath; J. W. V. Storey; J. S. Lawrence

    2008-01-29

    The proposed design for PILOT is a general-purpose, wide-field 1 degree 2.4m, f/10 Ritchey-Chretien telescope, with fast tip-tilt guiding, for use 0.5-25 microns. The design allows both wide-field and diffraction-limited use at these wavelengths. The expected overall image quality, including median seeing, is 0.28-0.3" FWHM from 0.8-2.4 microns. Point source sensitivities are estimated.

  3. Metallurgical Process Design A tribute to Douglas' conceptual design approach

    E-Print Network [OSTI]

    Linninger, Andreas A.

    and systematic flowsheet generation1-2. . Although perfected for continuous petrochemical processes, this work1 Metallurgical Process Design ­ A tribute to Douglas' conceptual design approach Andreas A. Linninger Laboratory for Product and Process Design Department of Chemical Engineering, University

  4. Promoting Learning of Instructional Design via Overlay Design Tools

    E-Print Network [OSTI]

    Carle, Andrew Jacob

    2012-01-01

    design via overlay design tools. Bibliography Alexander,conceptual mapping as a tool in the process of engineeringJ. A. (2002). Damask: A tool for early-stage design and

  5. Design for manufacturing (DFM) in submicron VLSI design 

    E-Print Network [OSTI]

    Cao, Ke

    2009-05-15

    As VLSI technology scales to 65nm and below, traditional communication between design and manufacturing becomes more and more inadequate. Gone are the days when designers simply pass the design GDSII ?le to the foundry and ...

  6. High-dimensional design space visualization for conceptual structural design

    E-Print Network [OSTI]

    Mueller, Caitlin T

    2014-01-01

    This thesis focuses on visualizing high-dimensional design spaces for early-stage design problems in structural engineering and related disciplines. The design space, which is defined as the n + 1-dimensional surface that ...

  7. Multidisciplinary design optimization of an automotive magnetorheological brake design

    E-Print Network [OSTI]

    Park, Edward

    Multidisciplinary design optimization of an automotive magnetorheological brake design Edward J to the elec- tromagnet. Key issues involved in the initial design of the automotive MR brake are presented: Magnetorheological fluid; Automotive brake; Finite element analysis; Computational fluid dynamics; Multidisciplinary

  8. AIDP -Apple Interface Design Project

    E-Print Network [OSTI]

    Tollmar, Konrad

    AIDP - Apple Interface Design Project AIDP - Apple Interface Design Project m 92-95 m Joy Mountford m Design Centre, Advanced Technology Group m Apple's Industrial Design Group "Encourage ProjectThe Project m Bridge the gulf between the physical and virtual worlds - Apple m Design a new way

  9. Hidden Market Design Sven Seuken

    E-Print Network [OSTI]

    Chen, Yiling

    Hidden Market Design Sven Seuken School of Engineering & Applied Sciences Harvard University Market Design." The design of a "weakly hidden" market involves reducing some of the market complexities constraints). We show that the intersection of UI design and market design is of particular importance

  10. Silo Storage Preconceptual Design

    SciTech Connect (OSTI)

    Stephanie L. Austad; Patrick W. Bragassa; Kevin M Croft; David S Ferguson; Scott C Gladson; Annette L Shafer; John H Weathersby

    2012-09-01

    The National Nuclear Security Administration (NNSA) has a need to develop and field a low-cost option for the long-term storage of a variety of radiological material. The storage option’s primary requirement is to provide both environmental and physical protection of the materials. Design criteria for this effort require a low initial cost and minimum maintenance over a 50-year design life. In 1999, Argonne National Laboratory-West was tasked with developing a dry silo storage option for the BN-350 Spent Fuel in Aktau Kazakhstan. Argon’s design consisted of a carbon steel cylinder approximately 16 ft long, 18 in. outside diameter and 0.375 in. wall thickness. The carbon steel silo was protected from corrosion by a duplex coating system consisting of zinc and epoxy. Although the study indicated that the duplex coating design would provide a design life well in excess of the required 50 years, the review board was concerned because of the novelty of the design and the lack of historical use. In 2012, NNSA tasked Idaho National Laboratory (INL) with reinvestigating the silo storage concept and development of alternative corrosion protection strategies. The 2012 study, “Silo Storage Concepts, Cathodic Protection Options Study” (INL/EST-12-26627), concludes that the option which best fits the design criterion is a passive cathotic protection scheme, consisting of a carbon steel tube coated with zinc or a zinc-aluminum alloy encapsulated in either concrete or a cement grout. The hot dipped zinc coating option was considered most efficient, but the flame-sprayed option could be used if a thicker zinc coating was determined to be necessary.

  11. Hard Evidence and Mechanism Design

    E-Print Network [OSTI]

    Bull, J; Watson, J

    2007-01-01

    for mechanism design. Thus, as Green and La?ont recognizedmechanism design. Second, we lend support to Green and La?by Green and La?ont (1986). Any setting of mechanism design

  12. Sandia Energy - Rotor Aerodynamic Design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aerodynamic Design Home Stationary Power Energy Conversion Efficiency Wind Energy Rotor Innovation Rotor Aerodynamic Design Rotor Aerodynamic DesignTara Camacho-Lopez2015-05-28T16:...

  13. Design of a bicycle rig

    E-Print Network [OSTI]

    Racz, Rastislav

    2010-01-01

    A design of a bicycle (bike) rig was conducted. This bike rig is designed to be used for aerodynamics measurement testing of bicycles, cyclists and cycling related items in a wind tunnel. This paper discusses the design ...

  14. Information Design Journal 11/1, Fall 2003 Designing Information Design

    E-Print Network [OSTI]

    Karabeg, Dino

    Information Design Journal 11/1, Fall 2003 Designing Information Design Author: Dino Karabeg dino@ifi.uio.no (+47) 22 85 27 02 Abstract By designing information design we arrive at a completely new approach to information. Within this new approach we are able to create new information formats

  15. Designer de Sitter Spacetimes

    E-Print Network [OSTI]

    K. Schleich; D. M. Witt

    2008-09-13

    Recent observations in cosmology indicate an accelerating expansion of the universe postulated to arise from some form of dark energy, the paradigm being positive cosmological constant. De Sitter spacetime is the well-known isotropic solution to the Einstein equations with cosmological constant. However, as discussed here, it is not the most general, locally isotropic solution. One can construct an infinite family of such solutions, designer de Sitter spacetimes, which are everywhere locally isometric to a region of de Sitter spacetime. However, the global dynamics of these designer cosmologies is very different than that of de Sitter spacetime itself. The construction and dynamics of these designer de Sitter spacetimes is detailed along with some comments about their implications for the structure of our universe.

  16. OOTW Force Design Tools

    SciTech Connect (OSTI)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  17. Remote Systems Design & Deployment

    SciTech Connect (OSTI)

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  18. Fire protection design criteria

    SciTech Connect (OSTI)

    1997-03-01

    This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, national Fire Protection Association Codes and Standards, and any other applicable DOE construction criteria. This Standard, along with other delineated criteria, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  19. ISIS Facility: Facility Design Challenges

    E-Print Network [OSTI]

    McDonald, Kirk

    ISIS Facility: Facility Design Challenges Matt Fletcher Head, Design Division ISIS Department, FNAL #12;ISIS -- neutrons Diamond -- X-rays #12;#12;· Lifetime · Reliable Operation · Flexibility

  20. MARSAME Develop A Survey Design 4 DEVELOP A SURVEY DESIGN

    E-Print Network [OSTI]

    MARSAME Develop A Survey Design 4 DEVELOP A SURVEY DESIGN 4.1 Introduction Once a decision rule has been developed, a disposition survey can be designed for the impacted materials and equipment (M costly and time-consuming development of redundant survey designs. The evaluation of existing SOPs

  1. Meta-Design: Expanding Boundaries and Redistributing Control in Design

    E-Print Network [OSTI]

    Fischer, Gerhard

    Meta-Design: Expanding Boundaries and Redistributing Control in Design Gerhard Fischer Center for Lifelong Learning and Design University of Colorado, Boulder http://l3d.cs.colorado.edu/~gerhard/ Abstract. Meta-design is an emerging conceptual framework aimed at defining and creating socio

  2. Evaluating Design Project Creativity in Engineering Design Courses Postdoctoral Fellow

    E-Print Network [OSTI]

    Salustri, Filippo A.

    Evaluating Design Project Creativity in Engineering Design Courses I. Chiu Postdoctoral Fellow to evaluating creativity using both the literature and our experiences with evaluating design project creativity design project creativity and include the evaluation within the grading framework. We will focus

  3. Design Editorial The Evolution and the Future of Mechanical Design

    E-Print Network [OSTI]

    Papalambros, Panos

    Journal of Mechanical Design Editorial The Evolution and the Future of Mechanical Design Some years in our Journal of Mechanical Design. Formal descriptions of the journal's content have been very well Committees, as listed in the journal's purpose and scope: The Journal of Mechanical Design communicates

  4. Digital Styling for Designers: in Prospective Automotive Design

    E-Print Network [OSTI]

    Toronto, University of

    design studios are introducing a high resolution large-display H/W, so called a power wallDigital Styling for Designers: in Prospective Automotive Design Seok-Hyung Bae and Ryugo Kijima) the digital design sketch, (b) real-size spline curve modification system, and (c) direct 3D shape creation

  5. FHR Generic Design Criteria

    SciTech Connect (OSTI)

    Flanagan, G.F.; Holcomb, D.E.; Cetiner, S.M.

    2012-06-15

    The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC)–based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

  6. Wood energy system design

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This handbook, Wood Energy System Design, was prepared with the support of the Council of Great Lakes Governors and the US Department of Energy. It contains: wood fuel properties; procurement; receiving, handling, and storage; combustion; gasification; emission control; electric power generation and cogeneration; and case studies. (JF)

  7. Artificial Heart Valve Design

    E-Print Network [OSTI]

    Provancher, William

    Artificial Heart Valve Design Your Chance to be a Biomedical Engineer #12;Circulatory System Video #12;What is a Heart Valve? · Heart Valve Video #12;#12;What Does a Heart Valve Do? · Maintain the one direction flow of blood through the heart · Heart valves allow blood to flow through in a forward direction

  8. Design Composition Johannes R. Sametinger

    E-Print Network [OSTI]

    Keller, Rudolf K.

    Design Composition Johannes R. Sametinger Johannes Kepler Universität Linz A-4040 Linz, Austria and changeable software architectures is still a challenging task. Design patterns capture the expertise for reusable design solutions, but there is no methodical approach to providing conceptual design building

  9. FEMP Designated Product: Lavatory Faucets

    Broader source: Energy.gov [DOE]

    FEMP suspended its product designation and purchasing specification for commercial faucets until further notice.

  10. Incremental Mechanism Design Vincent Conitzer

    E-Print Network [OSTI]

    Incremental Mechanism Design Vincent Conitzer Duke University Department of Computer Science@cs.cmu.edu Abstract Mechanism design has traditionally focused almost exclusively on the design of truthful mechanisms bounded agents may not be able to find the best manipulation, and 3. when designing mechanisms

  11. The division of Machine Design

    E-Print Network [OSTI]

    Zhao, Yuxiao

    Requirement engineering Simulation Multi- disciplinary design VR CAD Robust optimization 3D- printing Product

  12. Eigenproblems in Resonant MEMS Design

    E-Print Network [OSTI]

    California at Davis, University of

    Eigenproblems in Resonant MEMS Design David Bindel UC Berkeley, CS Division Eigenproblems inResonant MEMS Design ­ p.1/21 #12;What are MEMS? Eigenproblems inResonant MEMS Design ­ p.2/21 #12;RF MEMSResonant MEMS Design ­ p.3/21 #12;Micromechanical filters Filtered signal Mechanical filter Capacitive sense

  13. Achromatic Interaction Point Design

    SciTech Connect (OSTI)

    Guimei Wang,, Yaroslav Derbenev, S.Alex Bogacz, P. Chevtsov, Andre Afanaciev, Charles Ankenbrandt, Valentin Ivanov, Rolland P. Johnson

    2009-05-01

    Designers of high-luminosity energy-frontier muon colliders must provide strong beam focusing in the interaction regions. However, the construction of a strong, aberration-free beam focus is difficult and space consuming, and long straight sections generate an off-site radiation problem due to muon decay neutrinos that interact as they leave the surface of the earth. Without some way to mitigate the neutrino radiation problem, the maximum c.m. energy of a muon collider will be limited to about 3.5 TeV. A new concept for achromatic low beta design is being developed, in which the interaction region telescope and optical correction elements, are installed in the bending arcs. The concept, formulated analytically, combines space economy, a preventative approach to compensation for aberrations, and a reduction of neutrino flux concentration. An analytical theory for the aberration-free, low beta, spatially compact insertion is being developed.

  14. Advanced medical accelerator design

    SciTech Connect (OSTI)

    Alonso, J.R.; Elioff, T.; Garren, A.

    1982-11-01

    This report describes the design of an advanced medical facility dedicated to charged particle radiotherapy and other biomedical applications of relativistic heavy ions. Project status is reviewed and some technical aspects discussed. Clinical standards of reliability are regarded as essential features of this facility. Particular emphasis is therefore placed on the control system and on the use of technology which will maximize operational efficiency. The accelerator will produce a variety of heavy ion beams from helium to argon with intensities sufficient to provide delivered dose rates of several hundred rad/minute over large, uniform fields. The technical components consist of a linac injector with multiple PIG ion sources, a synchrotron and a versatile beam delivery system. An overview is given of both design philosophy and selected accelerator subsystems. Finally, a plan of the facility is described.

  15. Designing Automated Market Makers with Adaptive Liquidity

    E-Print Network [OSTI]

    Li, Xiaolong

    2012-01-01

    8 Optimal Market Design Complete Pricefor dynamic prediction market design. Operations Research,Combinatorial information market design. Information Systems

  16. The POLARBEAR Experiment: Design and Characterization

    E-Print Network [OSTI]

    Kermish, Zigmund David

    2012-01-01

    structural design . . . . . . . . . . . . . . . . . . . iiicircuitry. Focal plane structural design The challenge ofverify the structural stiffness for the APEX-SZ design with

  17. Mechanical Design Engineer | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    diagnostics instrumentationoptics design SKILLS: Machine, design, heat transfer and structural design, Parametric modeling experience, Knowledge of manufacturing techniques,...

  18. Optimal design with probabilistic objective and constraints

    E-Print Network [OSTI]

    Royset, J O; Kiureghian, A D; Polak, E

    2006-01-01

    Optimal design of reinforced concreteopti- mal structural design under uncertainty. ” EarthquakeReliability-based optimal design of series structural

  19. MEIC Design Summary

    E-Print Network [OSTI]

    Abeyratne, S; Bogacz, A; Brindza, P; Cai, Y; Camsonne, A; Castilla, A; Chevtsov, P; Daly, E; Derbenev, Y S; Douglas, D; Dudnikov, V; Ent, R; Erdelyi, B; Filatov, Y; Gaskell, D; Grames, J; Guo, J; Harwood, L; Hutton, A; Hyde, C; Jordan, K; Kimber, A; Krafft, G A; Kondratenko, A; Kondratenko, M; Li, R; Lin, F; Mann, T; McIntyre, P; Michalski, T; Morozov, V S; Nadel-Turonski, P; Nosochkov, Y M; Ostroumov, P N; Park, K; Pilat, F; Poelker, M; Pogue, N J; Rimmer, R; Roblin, Y; Satogata, T; Sattarov, A; Spata, M; Suleiman, R; Sullivan, M; Sy, A; Tennant, C; Wang, H; Wang, M-H; Wang, S; Wienands, U; Zhang, H; Zhang, Y; Zhao, Z

    2015-01-01

    This document summarizes the design of Jefferson Lab's electron-ion collider, MEIC, as of January 20, 2015, and describes the facility whose cost was estimated for the United States Department of Energy Nuclear Sciences Advisory Committee EIC cost review of January 26-28, 2015. In particular, each of the main technical systems within the collider is presented to the level of the best current information.

  20. Designing a Benchmarking Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8, 20153Danielthrough theKDesertDesigning Auction-Based

  1. Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeVehicleDepartment ofGraphics » DOE Logo,DepartmentalDesign

  2. Photovoltaic Incentive Design Handbook

    SciTech Connect (OSTI)

    Hoff, T. E.

    2006-12-01

    Investments in customer-owned grid-connected photovoltaic (PV) energy systems are growing at a steady pace. This is due, in part, to the availability of attractive economic incentives offered by public state agencies and utilities. In the United States, these incentives have largely been upfront lump payments tied to the system capacity rating. While capacity-based ''buydowns'' have stimulated the domestic PV market, they have been criticized for subsidizing systems with potentially poor energy performance. As a result, the industry has been forced to consider alternative incentive structures, particularly ones that pay based on long-term measured performance. The industry, however, lacks consensus in the debate over the tradeoffs between upfront incentive payments versus longer-term payments for energy delivery. This handbook is designed for agencies and utilities that offer or intend to offer incentive programs for customer-owned PV systems. Its purpose is to help select, design, and implement incentive programs that best meet programmatic goals. The handbook begins with a discussion of the various available incentive structures and then provides qualitative and quantitative tools necessary to design the most appropriate incentive structure. It concludes with program administration considerations.

  3. GEM Technical Design Report

    SciTech Connect (OSTI)

    Not Available

    1993-07-31

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  4. Slurry reactor design studies

    SciTech Connect (OSTI)

    Fox, J.M.; Degen, B.D.; Cady, G.; Deslate, F.D.; Summers, R.L. ); Akgerman, A. ); Smith, J.M. )

    1990-06-01

    The objective of these studies was to perform a realistic evaluation of the relative costs of tublar-fixed-bed and slurry reactors for methanol, mixed alcohols and Fischer-Tropsch syntheses under conditions where they would realistically be expected to operate. The slurry Fischer-Tropsch reactor was, therefore, operated at low H{sub 2}/CO ratio on gas directly from a Shell gasifier. The fixed-bed reactor was operated on 2.0 H{sub 2}/CO ratio gas after adjustment by shift and CO{sub 2} removal. Every attempt was made to give each reactor the benefit of its optimum design condition and correlations were developed to extend the models beyond the range of the experimental pilot plant data. For the methanol design, comparisons were made for a recycle plant with high methanol yield, this being the standard design condition. It is recognized that this is not necessarily the optimum application for the slurry reactor, which is being proposed for a once-through operation, coproducing methanol and power. Consideration is also given to the applicability of the slurry reactor to mixed alcohols, based on conditions provided by Lurgi for an Octamix{trademark} plant using their standard tubular-fixed reactor technology. 7 figs., 26 tabs.

  5. Organic Tandem Solar Cells: Design and Formation

    E-Print Network [OSTI]

    Chen, Chun-Chao

    2015-01-01

    Angeles Organic Tandem Solar Cells: Design and Formation AOrganic Tandem Solar Cells: Design and Formation by Chun-multi-junction tandem solar-cell design. Given this design,

  6. Design space exploration and optimization using modern ship design tools

    E-Print Network [OSTI]

    Jones, Adam T. (Adam Thomas)

    2014-01-01

    Modern Naval Architects use a variety of computer design tools to explore feasible options for clean sheet ship designs. Under the Naval Sea Systems Command (NAVSEA), the Naval Surface Warfare Center, Carderock Division ...

  7. Teaching Design for Environment in Product Design Classes

    E-Print Network [OSTI]

    Baeriswyl, Michael C.

    The paper presents an approach to teaching design for environment (DFE) in the context of a product design and development course. The teaching method has been applied in our classes for graduate engineering, business, and ...

  8. Informing design decisions : an approach to corporate building design

    E-Print Network [OSTI]

    Maxwell, Marc A

    1985-01-01

    This thesis is an investigation into design methodologies. How do we, as designers, prepare ourselves for decision making and evaluate our assumptions and decisions? The intent is to employ this information as a basis for ...

  9. Applying "Design for Disassembly" to connection design in steel structures

    E-Print Network [OSTI]

    Silverstein, Scott A. (Scott Aaron)

    2009-01-01

    Design for Disassembly (DfD), also known as Design for Deconstruction, is an emerging initiative of sustainable construction that favors disassembly over demolition, considering a building's full life cycle during the ...

  10. Green Buildings: Construction Design Firms' Implementation of Sustainable Design Standards

    E-Print Network [OSTI]

    Malone, Nathan

    2008-12-19

    in order to stay competitive in the construction design industry. The paper starts by describing the parts of the current industry standard green building rating system, Leadership in Energy and Environmental Design (LEED), and explaining whom uses LEED...

  11. A New Design Method Framework for Open Origami Design Problems 

    E-Print Network [OSTI]

    Li, Wei

    2014-08-12

    of origami structures has expanded their engineering application in aerospace, medical devices, and architecture. In order to support the automatic design of more complex modern origami structures, several computational origami design methods have been...

  12. Stachys sp? (Weed in cultivated area) 

    E-Print Network [OSTI]

    David C. Reed

    2011-08-10

    Under cost-shared funding with the U.S. Department of Energy and the Gas Research Institute, AiResearch Manufacturing Company, Torrance, California has developed a ceramic/metallic hybrid recuperator to operate in dirty ...

  13. Suggestions for Weed Control in Corn 

    E-Print Network [OSTI]

    Baumann, Paul A.

    2002-02-19

    in seedling dock AA tr ex N i ne-O ? 0.9 to 1.1 lbs. on winter fallo w ed lands. the spring. N o rmal w eed contr ol pr ograms will be (atrazine) necessar y at cr op planting time. (R efer to label for specific S yngenta and others w eeds contr olled.) N umer... factant or cr op oil concentrate at 1.0% v/v . S yngenta cr op oil concentrate N o te: G r amo x one E xtra or M a x ? may be combined with atrazine or B ladex ? for r esidual contr ol Annual br oadleaf and grass w e eds R oundup U ltra ? 0.5 to 1.5 qts...

  14. DEPARTMENTS INVOLVED WITH WEED RESEARCH AND EDUCATION

    E-Print Network [OSTI]

    Maxwell, Bruce D.

    for Producers, Bill Dyer Identifying and Testing Candidate Agents for Russian Olive Biocontrol, David Weaver Mosley Continental Divide Barrier Zone, Kim Goodwin Determining the Efficacy of Biocontrol Using and Monitoring Insectaries for Yellow Toadflax Biocontrol, David Weaver Herbicide Resistance Extension Info

  15. Suggestions for Weed Control in Peanuts 

    E-Print Network [OSTI]

    Baumann, Paul A.; Lemon, Robert G.

    2001-05-10

    ation to pre v ent spreading w eed seed , rhizomes or roots . This is particularly important with perennial w eeds because of the w a y in which the y propagate (b y seed and root tissue). Ho w e v e r , also e x ercise caution when plo wing perennial... or at least reducing the potential for contin- ued infestation. 5. Consider the economics of using mechanical cultiv ation alone for w eed control in the crop, especially where annual w eed infestations are light. 6. Practice rotation to crops that ph ysically...

  16. Integrated Biological Control

    SciTech Connect (OSTI)

    JOHNSON, A.R.

    2003-10-09

    Biological control is any activity taken to prevent, limit, clean up, or remediate potential environmental, health and safety, or workplace quality impacts from plants, animals, or microorganisms. At Hanford the principal emphasis of biological control is to prevent the transport of radioactive contamination by biological vectors (plants, animals, or microorganisms), and where necessary, control and clean up resulting contamination. Other aspects of biological control at Hanford include industrial weed control (e.g.; tumbleweeds), noxious weed control (invasive, non-native plant species), and pest control (undesirable animals such as rodents and stinging insects, and microorganisms such as molds that adversely affect the quality of the workplace environment). Biological control activities may be either preventive (a priori) or in response to existing contamination spread (a posteriori). Surveillance activities, including ground, vegetation, flying insect, and other surveys, and a priori control actions, such as herbicide spraying and placing biological barriers, are important in preventing radioactive contamination spread. If surveillance discovers that biological vectors have spread radioactive contamination, a posteriori control measures, such as fixing contamination, followed by cleanup and removal of the contamination to an approved disposal location are typical response functions. In some cases remediation following the contamination cleanup and removal is necessary. Biological control activities for industrial weeds, noxious weeds and pests have similar modes of prevention and response.

  17. Design for testability 

    E-Print Network [OSTI]

    Mullins, Jacqueline E.

    1991-01-01

    . 3. For each memory access in addition to the initial read requirement, add 1 point. 4. For each clock cycle required, add 1 point. 5. For each conditional flag that could be affected, add 1 point (up to a maximum of 2). 6. For each... 000 001 010 011 100 101 110 10100000 11110001 00000010 01010011 11000100 00010101 11100110 10100101 AO Fl 02 C4 15 E6 A5 AO 91 E6 AA BF A5 A5 20 The RAM device has specific tests which are designed to detect the different...

  18. Preliminary PBFA II design

    SciTech Connect (OSTI)

    Johnson, D. L.; VanDevender, J. P.; Martin, T. H.

    1980-01-01

    The upgrade of Sandia National Laboratories particle beam fusion accelerator, PBFA I, to PBFA II presents several interesting and challenging pulsed power design problems. PBFA II requires increasing the PBFA I output parameters from 2 MV, 30 TW, 1 MJ to 4 MV, 100 TW, 3.5 MJ with the constraint of using much of the same PBFA I hardware. The increased PBFA II output will be obtained by doubling the number of modules (from 36 to 72), increasing the primary energy storage (from 4 MJ to 15 MJ), lowering the pulse forming line (PFL) output impedance, and adding a voltage doubling network.

  19. Control system design method

    DOE Patents [OSTI]

    Wilson, David G. (Tijeras, NM); Robinett, III, Rush D. (Tijeras, NM)

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  20. DesignForward

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation Current HAB Packet HanfordDOEDanielDeSmall Business Forum &DesignForward

  1. Designated Team Leader

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you not find what you were lookingAbout this siteCenter forDesignated

  2. FATIGUE DESIGN CURVES FOR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submitKansasCommunitiesofExtrans - Permeation Measurement2 0 thFATIGUE DESIGN CURVES

  3. 3F6 -Software Engineering and Design Design Patterns (II)

    E-Print Network [OSTI]

    Young, Steve

    3F6 - Software Engineering and Design Handout 7 Design Patterns (II) With Markup Steve Young #12;Design Patterns (II) 1 Observer Pattern Problem We want our drawing editor to be able to store for a shape in the drawing. These include typing in values for Red, Green and Blue, selecting a colour from

  4. DesignMinders: Preserving and Sharing Informal Software Design Knowledge

    E-Print Network [OSTI]

    van der Hoek, André

    DesignMinders: Preserving and Sharing Informal Software Design Knowledge Gerald Bortis and André knowledge. For example, knowledge management systems that allow developers to populate and search, andre}@ics.uci.edu Abstract. Software design is a knowledge-intensive activity. Knowledge is both

  5. UC DAVIS PHYSICAL DESIGN FRAMEWORK PHYSICAL DESIGN FRAMEWORK

    E-Print Network [OSTI]

    Ullrich, Paul

    the criteria the campus will use to judge the success of proposed projects with regard to planning and designUC DAVIS PHYSICAL DESIGN FRAMEWORK PHYSICAL DESIGN FRAMEWORK 2008 /2009 #12;ACKNOWLEDGEMENTS, Environmental and Capital Planning Karl Mohr, Physical, Environmental and Capital Planning Joseph Perry, Safety

  6. PHENIX Conceptual Design Report

    SciTech Connect (OSTI)

    Nagamiya, Shoji; Aronson, Samuel H.; Young, Glenn R.; Paffrath, Leo

    1993-01-29

    The PHENIX Conceptual Design Report (CDR) describes the detector design of the PHENIX experiment for Day-1 operation at the Relativistic Heavy Ion Collider (RHIC). The CDR presents the physics capabilities, technical details, cost estimate, construction schedule, funding profile, management structure, and possible upgrade paths of the PHENIX experiment. The primary goals of the PHENIX experiment are to detect the quark-gluon plasma (QGP) and to measure its properties. Many of the potential signatures for the QGP are measured as a function of a well-defined common variable to see if any or all of these signatures show a simultaneous anomaly due to the formation of the QGP. In addition, basic quantum chromodynamics phenomena, collision dynamics, and thermodynamic features of the initial states of the collision are studied. To achieve these goals, the PHENIX experiment measures lepton pairs (dielectrons and dimuons) to study various properties of vector mesons, such as the mass, the width, and the degree of yield suppression due to the formation of the QGP. The effect of thermal radiation on the continuum is studied in different regions of rapidity and mass. The e[mu] coincidence is measured to study charm production, and aids in understanding the shape of the continuum dilepton spectrum. Photons are measured to study direct emission of single photons and to study [pi][sup 0] and [eta] production. Charged hadrons are identified to study the spectrum shape, production of antinuclei, the [phi] meson (via K[sup +]K[sup [minus

  7. CONCEPTUAL DESIGN REPORT

    SciTech Connect (OSTI)

    ROBINSON,K.

    2006-12-31

    Brookhaven National Laboratory has prepared a conceptual design for a world class user facility for scientific research using synchrotron radiation. This facility, called the ''National Synchrotron Light Source II'' (NSLS-II), will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility. Together these will enable the study of material properties and functions with a spatial resolution of {approx}1 nm, an energy resolution of {approx}0.1 meV, and the ultra high sensitivity required to perform spectroscopy on a single atom. The overall objective of the NSLS-II project is to deliver a research facility to advance fundamental science and have the capability to characterize and understand physical properties at the nanoscale, the processes by which nanomaterials can be manipulated and assembled into more complex hierarchical structures, and the new phenomena resulting from such assemblages. It will also be a user facility made available to researchers engaged in a broad spectrum of disciplines from universities, industries, and other laboratories.

  8. NISTIR 7497 Security Architecture Design

    E-Print Network [OSTI]

    NISTIR 7497 Security Architecture Design Process for Health Information Exchanges (HIEs) Matthew Scholl Kevin Stine Kenneth Lin Daniel Steinberg #12;NISTIR 7497 Security Architecture Design Process Technology Laboratory National Institute of Standards and Technology Gaithersburg, MD 20899 Kenneth Lin

  9. 3 - DJ : sampling as design

    E-Print Network [OSTI]

    Patel, Sayjel Vijay

    2015-01-01

    3D Sampling is introduced as a new spatial craft that can be applied to architectural design, akin to how sampling is applied in the field of electronic music. Through the development of 3-DJ, a prototype design software, ...

  10. Listing Unique Fractional Factorial Designs 

    E-Print Network [OSTI]

    Shrivastava, Abhishek Kumar

    2011-02-22

    Fractional factorial designs are a popular choice in designing experiments for studying the effects of multiple factors simultaneously. The first step in planning an experiment is the selection of an appropriate fractional ...

  11. Integrated transportation system design optimization

    E-Print Network [OSTI]

    Taylor, Christine P. (Christine Pia), 1979-

    2007-01-01

    Traditionally, the design of a transportation system has focused on either the vehicle design or the network flow, assuming the other as given. However, to define a system level architecture for a transportation system, ...

  12. Design of mechanical arterial simulator

    E-Print Network [OSTI]

    Chai, Lauren (Lauren Amy)

    2012-01-01

    A force controlled ultrasound probe is being explored as a new method of measuring blood pressure. An arterial simulator was designed and built for experiments. For this simulator, the vessels and bulk material were designed ...

  13. Design intent tool: User guide

    SciTech Connect (OSTI)

    Mills, Evan; Abell, Daniel; Bell, Geoffrey; Faludi, Jeremy; Greenberg, Steve; Hitchcock, Rob; Piette, Mary Ann; Sartor, Dalei; Stum, Karl

    2002-08-23

    This database tool provides a structured approach to recording design decisions that impact a facility's design intent in areas such as energy efficiency.Owners and de signers alike can plan, monitor and verify that a facility's design intent is being met during each stage of the design process. Additionally, the Tool gives commissioning agents, facility operators and future owners and renovators an understanding of how the building and its subsystems are intended to operate, and thus track and benchmark performance.

  14. Residential Retrofit Design Guide Overview

    Office of Energy Efficiency and Renewable Energy (EERE)

    This webinar covered the Residential Retrofit Program Design Guide and its elements, including assess, plan, implement, and evaluate.

  15. ARIA Cell Solenoid Design Considerations

    SciTech Connect (OSTI)

    Schulze, Martin E.

    2015-05-20

    Detailed schematics of the structure of the preliminary ARIA solenoid cell design including overhead and cross section views and dimensions.

  16. Sustainability: An Engineering Design Perspective

    E-Print Network [OSTI]

    Salustri, Filippo A.

    Sustainability: An Engineering Design Perspective Filippo A. Salustri, PhD, P.Eng. Ryerson Making x Planning x Technology s Sustainability must be built-in to every aspect #12;Design Balance II) s Sustainability must impact all sectors #12;Sustainability Balance s Sustainability: x is a part of design balance

  17. ,{ MO. REV. NO. THERMAL DESIGN

    E-Print Network [OSTI]

    Rathbun, Julie A.

    ,{ MO. REV. NO. LRRR 300 THERMAL DESIGN FINAL REPORT ATM-931 PAGE i OF iv DATE 1 S Dec 1970 The results of thermal design/analyses performed on the 300 corner Laser Ranging Retro-Reflector (LRRR 300 performance profiles are contained herein, The entire LRRR thermal design effort is des- cribed commendng

  18. Design Criteria Document Hybrid Spectrometer

    E-Print Network [OSTI]

    Johnson, Peter D.

    Design Criteria Document for the Hybrid Spectrometer (HYSPEC) SNS SING14B-00-DC0001-R00 Date: 15 contract DE-AC05-00OR22725 #12;DESIGN CRITERIA DOCUMENT FOR THE HYBRID SPECTROMETER (HYSPEC) August 2005 or reflect those of the United States government or any agency thereof. #12;SING14B-00-DC0001-R00 DESIGN

  19. Design Criteria Document Hybrid Spectrometer

    E-Print Network [OSTI]

    Johnson, Peter D.

    Design Criteria Document for the Hybrid Spectrometer (HYSPEC) SNS SING14B-00-DC0001-R01 Date: 1 contract DE-AC05-00OR22725 #12;DESIGN CRITERIA DOCUMENT FOR THE HYBRID SPECTROMETER (HYSPEC) Mark Hagen or reflect those of the United States government or any agency thereof. #12;SING14B-00-DC0001-R01 DESIGN

  20. Computational RNA Secondary Structure Design

    E-Print Network [OSTI]

    Fournier, John J.F.

    Computational RNA Secondary Structure Design: Empirical Complexity and Improved Methods by Rosal in this thesis is focused on the design of RNA strands that are predicted to fold to a given secondary structure, according to a standard thermodynamic model. The design of RNA structures is important for applications

  1. LEARNINGACTIVITY#5 Design and Build

    E-Print Network [OSTI]

    Bowen, James D.

    , experimental data, and practical considerations contribute to the final product. We'll see how the truss; how structural analysis results and experimental data contribute to the design of structural members, you will be able to do the following: n Explain how design-build project delivery differs from design-bid

  2. Parametric design using IGRIP

    SciTech Connect (OSTI)

    Baker, C. [Pacific Northwest Lab., Richland, WA (United States). Applied Physics Center

    1994-10-01

    The Department of Energy`s (DOE) Hanford site near Richland, Washington is being cleaned up after 50 years of nuclear materials production. One of the most serious problems at the site is the waste stored in single-shell underground storage tanks. There are 149 of these tanks containing the spent fuel residue remaining after the fuel is dissolved in acid and the desired materials (primarily plutonium and uranium) are separated out. The tanks are upright cylinders 75 ft. in diameter with domed tops. They are made of reinforced concrete, have steel liners, and each tank is buried under 7--12 ft. of overburden. The tanks are up to 40-ft. high, and have capacities of 500,000, 750,000, or 1,000,000 gallons of waste. As many as one-third of these tanks are known or suspected to leak. The waste form contained in the tanks varies in consistency from liquid supernatant to peanut-butter-like gels and sludges to hard salt cake (perhaps as hard as low-grade concrete). The current waste retrieval plan is to insert a large long-reach manipulator through a hole cut in the top of the tank, and use a variety of end-effectors to mobilize the waste and remove it from the tank. PNL has, with the assistance of Deneb robotics employees, developed a means of using the IGRIP code to perform parametric design of mechanical systems. This method requires no modifications to the IGRIP code, and all design data are stored in the IGRIP workcell. The method is presented in the context of development of a passive articulated mechanism that is used to deliver down-arm services to a gantry robot. The method is completely general, however, and could be used to design a fully articulated manipulator. Briefly, the method involves using IGCALC expressions to control manipulator joint angles, and IGCALC variables to allow user control of link lengths and offsets. This paper presents the method in detail, with examples drawn from PNL`s experience with the gantry robot service-providing mechanism.

  3. Rock mechanics design in mining and tunneling

    SciTech Connect (OSTI)

    Bieniawski, Z.T.

    1984-01-01

    This book introduces the design process as applied to rock mechanics aspects of underground mining and tunneling. Topics covered include a historical perspective, the design process in engineering, empirical methods of design, observational methods of design, and guided design.

  4. Human-Centered Sustainable Product Design

    E-Print Network [OSTI]

    Agogino, Alice M.

    Inquiry ­! Green Building Design !! Week 2 ­! Brainstorming and Creative Design ­! Life Cycle Analysis / Sustainability Needs Human- centered design Uneconomical green design Unadopted green systems Sustainable systemsHuman-Centered Sustainable Product Design !!Module Overview !!Need Finding Methods 1 ME Module

  5. Material feedback in digital design tools

    E-Print Network [OSTI]

    Stanton, Christian J

    2009-01-01

    How do design tools feedback material behavior to the designer? Digital design tools in use by designers today provide a rich environment for design of form but offer little feedback of the material that ultimately realize ...

  6. Optimized design for PIGMI

    SciTech Connect (OSTI)

    Hansborough, L.; Hamm, R.; Stovall, J.; Swenson, D.

    1980-01-01

    PIGMI (Pion Generator for Medical Irradiations) is a compact linear proton accelerator design, optimized for pion production and cancer treatment use in a hospital environment. Technology developed during a four-year PIGMI Prototype experimental program allows the design of smaller, less expensive, and more reliable proton linacs. A new type of low-energy accelerating structure, the radio-frequency quadrupole (RFQ) has been tested; it produces an exceptionally good-quality beam and allows the use of a simple 30-kV injector. Average axial electric-field gradients of over 9 MV/m have been demonstrated in a drift-tube linac (DTL) structure. Experimental work is underway to test the disk-and-washer (DAW) structure, another new type of accelerating structure for use in the high-energy coupled-cavity linac (CCL). Sufficient experimental and developmental progress has been made to closely define an actual PIGMI. It will consist of a 30-kV injector, and RFQ linac to a proton energy of 2.5 MeV, a DTL linac to 125 MeV, and a CCL linac to the final energy of 650 MeV. The total length of the accelerator is 133 meters. The RFQ and DTL will be driven by a single 440-MHz klystron; the CCL will be driven by six 1320-MHz klystrons. The peak beam current is 28 mA. The beam pulse length is 60 ..mu..s at a 60-Hz repetition rate, resulting in a 100-..mu..A average beam current. The total cost of the accelerator is estimated to be approx. $10 million.

  7. Reliability-based casing design

    SciTech Connect (OSTI)

    Maes, M.A. [Univ. of Calgary, Alberta (Canada). Civil Engineering Dept.; Gulati, K.C.; Johnson, R.C. [Mobil Research and Development Corp., Dallas, TX (United States); McKenna, D.L. [Mobil Producing Nigeria, Lagos (Nigeria); Brand, P.R.; Lewis, D.B. [Mobil E and P Technical Center, Dallas, TX (United States)

    1995-06-01

    The present paper describes the development of reliability-based design criteria for oil and/or gas well casing/tubing. The approach is based on the fundamental principles of limit state design. Limit states for tubulars are discussed and specific techniques for the stochastic modeling of loading and resistance variables are described. Zonation methods and calibration techniques are developed which are geared specifically to the characteristic tubular design for both hydrocarbon drilling and production applications. The application of quantitative risk analysis to the development of risk-consistent design criteria is shown to be a major and necessary step forward in achieving more economic tubular design.

  8. Restoring Anadromous Fish Habitat in Big Canyon Creek Watershed, 2004-2005 Annual Report.

    SciTech Connect (OSTI)

    Rasmussen, Lynn

    2006-07-01

    The ''Restoring Anadromous Fish Habitat in the Big Canyon Creek Watershed'' is a multi-phase project to enhance steelhead trout in the Big Canyon Creek watershed by improving salmonid spawning and rearing habitat. Habitat is limited by extreme high runoff events, low summer flows, high water temperatures, poor instream cover, spawning gravel siltation, and sediment, nutrient and bacteria loading. Funded by the Bonneville Power Administration (BPA) as part of the Northwest Power Planning Council's Fish and Wildlife Program, the project assists in mitigating damage to steelhead runs caused by the Columbia River hydroelectric dams. The project is sponsored by the Nez Perce Soil and Water Conservation District. Target fish species include steelhead trout (Oncorhynchus mykiss). Steelhead trout within the Snake River Basin were listed in 1997 as threatened under the Endangered Species Act. Accomplishments for the contract period September 1, 2004 through October 31, 2005 include; 2.7 riparian miles treated, 3.0 wetland acres treated, 5,263.3 upland acres treated, 106.5 riparian acres treated, 76,285 general public reached, 3,000 students reached, 40 teachers reached, 18 maintenance plans completed, temperature data collected at 6 sites, 8 landowner applications received and processed, 14 land inventories completed, 58 habitat improvement project designs completed, 5 newsletters published, 6 habitat plans completed, 34 projects installed, 2 educational workshops, 6 displays, 1 television segment, 2 public service announcements, a noxious weed GIS coverage, and completion of NEPA, ESA, and cultural resources requirements.

  9. Photonic Design: From Fundamental Solar Cell Physics to Computational Inverse Design

    E-Print Network [OSTI]

    Miller, Owen Dennis

    2012-01-01

    1.2 Inverse Design . . . . . . . . . . . . . . . .II Photonic Inverse Design 5 ANew Photonic Inverse Design Method 5.1 Shape

  10. Naval Waste Package Design Report

    SciTech Connect (OSTI)

    M.M. Lewis

    2004-03-15

    A design methodology for the waste packages and ancillary components, viz., the emplacement pallets and drip shields, has been developed to provide designs that satisfy the safety and operational requirements of the Yucca Mountain Project. This methodology is described in the ''Waste Package Design Methodology Report'' Mecham 2004 [DIRS 166168]. To demonstrate the practicability of this design methodology, four waste package design configurations have been selected to illustrate the application of the methodology. These four design configurations are the 21-pressurized water reactor (PWR) Absorber Plate waste package, the 44-boiling water reactor (BWR) waste package, the 5-defense high-level waste (DHLW)/United States (U.S.) Department of Energy (DOE) spent nuclear fuel (SNF) Co-disposal Short waste package, and the Naval Canistered SNF Long waste package. Also included in this demonstration is the emplacement pallet and continuous drip shield. The purpose of this report is to document how that design methodology has been applied to the waste package design configurations intended to accommodate naval canistered SNF. This demonstrates that the design methodology can be applied successfully to this waste package design configuration and support the License Application for construction of the repository.

  11. ERHIC Conceptual Design

    SciTech Connect (OSTI)

    Ptitsyn,V.; Beebe-Wang,J.; Ben-Zvi,I.; Fedotov, A.; Fischer, W.; Hao, Y.; Kayran, D.; Litvinenko, V.N.; MacKay, W.W.; Montag, C.; Pozdeyev, E.; Roser, T.; Trbojevic, D.; Tsoupas, N.; Tsentalovich, E.

    2008-08-25

    The conceptual design of the high luminosity electron-ion collider, eRHIC, is presented. The goal of eRHIC is to provide collisions of electrons (and possibly positrons) with ions and protons at the center-of-mass energy range from 25 to 140 GeV, and with luminosities exceeding 10{sup 33} cm{sup -2} s{sup -1}. A considerable part of the physics program is based on polarized electrons, protons and He3 ions with high degree of polarization. In eRHIC electron beam will be accelerated in an energy recovery linac. Major R&D items for eRHIC include the development of a high intensity polarized electron source, studies of various aspects of energy recovery technology for high power beams and the development of compact magnets for recirculating passes. In eRHIC scheme the beam-beam interaction has several specific features, which have to be thoroughly studied. In order to maximize the collider luminosity, several upgrades of the existing RHIC accelerator are required. Those upgrades may include the increase of intensity as well as transverse and longitudinal cooling of ion and proton beams.

  12. Advances in geotectural design

    SciTech Connect (OSTI)

    Boyer, L.L. (ed.)

    1986-01-01

    Although the price of oil dropped well below $20 US earlier this year from a previous high above $35 US, the interest and participation shown in this conference does not seem to have been materially affected. Perhaps energy, although not unimportant, is no longer the driving force behind the continuing development and exploration of the earth shelter idiom in architecture. Rather, the thrust of most papers seems to seek an understanding of the adaptation of earth shelter into varied types of settings, especially urban applications, and also the understanding of the physical phenomenon of how an earth shelter works. The paper have been grouped into three basic categories with several subsections in each category. First, vernacular approaches are documented from the viewpoint of habitation, and followed by other types of utilization. Then, recent theoretical developments are reviewed in terms of materials, occupant studies, and heat transfer and air flow analyses. The final section deals with contemporary practice, where design concepts and case studies are presented, followed by building systems and urban planning aspects. All 54 papers have been abstracted separately for inclusion on the Energy Data Base.

  13. Design of Optimal Regulators

    E-Print Network [OSTI]

    Alexander Bolonkin; Robert Sierakowski

    2007-01-19

    Current research suggests the use of a liner quadratic performance index for optimal control of regulators in various applications. Some examples include correcting the trajectory of rocket and air vehicles, vibration suppression of flexible structures, and airplane stability. In all these cases, the focus is in suppressing/decreasing system deviations rapidly. However, if one compares the Linear Quadratic Regulator (LQR) solution with optimal solutions (minimum time), it is seen that the LQR solution is less than optimal in some cases indeed (3-6) times that obtained using a minimum time solution. Moreover, the LQR solution is sometimes unacceptable in practice due to the fact that values of control extend beyond admissible limits and thus the designer must choose coefficients in the linear quadratic form, which are unknown. The authors suggest methods which allow finding a quasi-optimal LQR solution with bounded control which is closed to the minimum time solution. They also remand the process of the minimum time decision. Keywords: Optimal regulator, minimum time controller, Linear Quadratic Regulator (LQR). -- This paper is declared a work of the U.S. Government and not subject to copyright protection in the USA. The manuscript is accepted as paper AIAA-2003-6638 by 2nd AIAA Unmanned Unlimited Systems, Technologies, and Operations-Aerospace, Land, and See Conference and Workshop - Exhibit, San Diego, California, USA, 15-18 Sep. 2003.

  14. Cooling load design tool for UFAD systems.

    E-Print Network [OSTI]

    Bauman, Fred; Schiavon, Stefano; Webster, Tom; Lee, Kwang Ho

    2010-01-01

    De- velopment of a Simplified Cooling Load Design Tool forand C. Benedek. 2007. “Cooling airflow design calculationscalculation method for design cooling loads in underfloor

  15. Analysis and design of reliable nanometer circuits

    E-Print Network [OSTI]

    Zhao, Chong

    2007-01-01

    OF CALIFORNIA, SAN DIEGO Analysis and Design of ReliableTHE DISSERTATION Analysis and Design of Reliable Nanometerthe difficulty in analysis and design of reliable digital

  16. Integrating Safety into Design and Construction | Department...

    Office of Environmental Management (EM)

    Integrating Safety into Design and Construction Integrating Safety into Design and Construction DepSecMemoIntegratingSafetyInDesignAndConstruction05Dec2005.pdf More Documents &...

  17. Designing More Effective Accountability Report Cards

    E-Print Network [OSTI]

    Sabbah, Faris M.

    2011-01-01

    stripped of other design elements (i.e. , axis headings,with unnecessary design elements. In his seminal work, Thereport cards and identify design elements of an effective

  18. Mechanical design of the SNS MEBT

    E-Print Network [OSTI]

    Oshatz, D.; DeMello, A.; Doolittle, L.; Luft, P.; Staples, J.; Zachoszcz, A.

    2001-01-01

    LBNL-47343 MECHANICAL DESIGN OF THE SNS MEBT* D. Oshatz † ,unusually compact mechanical design. 1 PHYSICS REQUIREMENTSsignificant thermal and mechanical design challenges [2].

  19. Calls to Action -- Linking Science to Design

    E-Print Network [OSTI]

    Fraker, Harrison

    2008-01-01

    the National Academy of Design, July 2008. Opposite: FlowAction Linking Science to Design Harrison Fraker Two recentthe fields of science and design. Entitled “Energy, Security

  20. Structuring, Aggregating, and Evaluating Crowdsourced Design Critique

    E-Print Network [OSTI]

    2015-01-01

    Klemmer, S. R. Learning design wisdom by augmenting physicalstructured feedback on visual designs using a crowd of non-communication expectations in design education. Int. J.

  1. Runtime deadlock analysis for system level design

    E-Print Network [OSTI]

    Cheung, Eric; Chen, Xi; Hsieh, Harry; Davare, Abhijit; Sangiovanni-Vincentelli, Alberto; Watanabe, Yosinori

    2009-01-01

    workshop on high level design validation and test, Nov. 2001Metropolis, and two real world design examples, which aredetection · System-level design · SystemC · Metropolis E.

  2. Waterflooding injectate design systems and methods (Patent) ...

    Office of Scientific and Technical Information (OSTI)

    Waterflooding injectate design systems and methods Citation Details In-Document Search Title: Waterflooding injectate design systems and methods A method of designing an injectate...

  3. Projecting Presence: A Media Design Manifesto

    E-Print Network [OSTI]

    Murakami, David Michael

    2015-01-01

    David. "Projection/Media Design Reel." Vimeo. N.p. , 9 Oct.set & media design .. 61 Fig.and media design . 75 Fig.

  4. Unfolding the political capacities of design 

    E-Print Network [OSTI]

    Domínguez Rubio, Fernando; Fogué, Uriel

    2015-01-01

    160 WHAT IS COSMOPOLITICAL DESIGN? Latour, B. 1999. Pandora’in-Publication Data What is cosmopolitical design? :design, nature and the built environment / [edited] by

  5. JUNO Conceptual Design Report

    E-Print Network [OSTI]

    T. Adam; F. An; G. An; Q. An; N. Anfimov; V. Antonelli; G. Baccolo; M. Baldoncini; E. Baussan; M. Bellato; L. Bezrukov; D. Bick; S. Blyth; S. Boarin; A. Brigatti; T. Brugière; R. Brugnera; M. Buizza Avanzini; J. Busto; A. Cabrera; H. Cai; X. Cai; A. Cammi; D. Cao; G. Cao; J. Cao; J. Chang; Y. Chang; M. Chen; P. Chen; Q. Chen; S. Chen; S. Chen; S. Chen; X. Chen; Y. Chen; Y. Cheng; D. Chiesa; A. Chukanov; M. Clemenza; B. Clerbaux; D. D'Angelo; H. de Kerret; Z. Deng; Z. Deng; X. Ding; Y. Ding; Z. Djurcic; S. Dmitrievsky; M. Dolgareva; D. Dornic; E. Doroshkevich; M. Dracos; O. Drapier; S. Dusini; M. A. Díaz; T. Enqvist; D. Fan; C. Fang; J. Fang; X. Fang; L. Favart; D. Fedoseev; G. Fiorentini; R. Ford; A. Formozov; R. Gaigher; H. Gan; A. Garfagnini; G. Gaudiot; C. Genster; M. Giammarchi; F. Giuliani; M. Gonchar; G. Gong; H. Gong; M. Gonin; Y. Gornushkin; M. Grassi; C. Grewing; V. Gromov; M. Gu; M. Guan; V. Guarino; W. Guo; X. Guo; Y. Guo; M. Göger-Neff; P. Hackspacher; C. Hagner; R. Han; Z. Han; J. Hao; M. He; D. Hellgartner; Y. Heng; D. Hong; S. Hou; Y. Hsiung; B. Hu; J. Hu; S. Hu; T. Hu; W. Hu; H. Huang; X. Huang; X. Huang; L. Huo; W. Huo; A. Ioannisian; D. Ioannisyan; M. Jeitler; K. Jen; S. Jetter; X. Ji; X. Ji; S. Jian; D. Jiang; X. Jiang; C. Jollet; M. Kaiser; B. Kan; L. Kang; M. Karagounis; N. Kazarian; S. Kettell; D. Korablev; A. Krasnoperov; S. Krokhaleva; Z. Krumshteyn; A. Kruth; P. Kuusiniemi; T. Lachenmaier; L. Lei; R. Lei; X. Lei; R. Leitner; F. Lenz; C. Li; F. Li; F. Li; J. Li; N. Li; S. Li; T. Li; W. Li; W. Li; X. Li; X. Li; X. Li; X. Li; Y. Li; Y. Li; Z. Li; H. Liang; H. Liang; J. Liang; M. Licciardi; G. Lin; S. Lin; T. Lin; Y. Lin; I. Lippi; G. Liu; H. Liu; H. Liu; J. Liu; J. Liu; J. Liu; J. Liu; Q. Liu; Q. Liu; S. Liu; S. Liu; Y. Liu; P. Lombardi; Y. Long; S. Lorenz; C. Lu; F. Lu; H. Lu; J. Lu; J. Lu; J. Lu; B. Lubsandorzhiev; S. Lubsandorzhiev; L. Ludhova; F. Luo; S. Luo; Z. Lv; V. Lyashuk; Q. Ma; S. Ma; X. Ma; X. Ma; Y. Malyshkin; F. Mantovani; Y. Mao; S. Mari; D. Mayilyan; W. McDonough; G. Meng; A. Meregaglia; E. Meroni; M. Mezzetto; J. Min; L. Miramonti; M. Montuschi; N. Morozov; T. Mueller; P. Muralidharan; M. Nastasi; D. Naumov; E. Naumova; I. Nemchenok; Z. Ning; H. Nunokawa; L. Oberauer; J. P. Ochoa-Ricoux; A. Olshevskiy; F. Ortica; H. Pan; A. Paoloni; N. Parkalian; S. Parmeggiano; V. Pec; N. Pelliccia; H. Peng; P. Poussot; S. Pozzi; E. Previtali; S. Prummer; F. Qi; M. Qi; S. Qian; X. Qian; H. Qiao; Z. Qin; G. Ranucci; A. Re; B. Ren; J. Ren; T. Rezinko; B. Ricci; M. Robens; A. Romani; B. Roskovec; X. Ruan; X. Ruan; A. Rybnikov; A. Sadovsky; P. Saggese; G. Salamanna; J. Sawatzki; J. Schuler; A. Selyunin; G. Shi; J. Shi; Y. Shi; V. Sinev; C. Sirignano; M. Sisti; O. Smirnov; M. Soiron; A. Stahl; L. Stanco; J. Steinmann; V. Strati; G. Sun; X. Sun; Y. Sun; Y. Sun; D. Taichenachev; J. Tang; A. Tietzsch; I. Tkachev; W. H. Trzaska; Y. Tung; S. van Waasen; C. Volpe; V. Vorobel; L. Votano; C. Wang; C. Wang; C. Wang; G. Wang; H. Wang; M. Wang; R. Wang; S. Wang; W. Wang; W. Wang; Y. Wang; Y. Wang; Y. Wang; Y. Wang; Z. Wang; Z. Wang; Z. Wang; Z. Wang; Z. Wang; W. Wei; Y. Wei; M. Weifels; L. Wen; Y. Wen; C. Wiebusch; S. Wipperfurth; S. C. Wong; B. Wonsak; C. Wu; Q. Wu; Z. Wu; M. Wurm; J. Wurtz; Y. Xi; D. Xia; J. Xia; M. Xiao; Y. Xie; J. Xu; J. Xu; L. Xu; Y. Xu; B. Yan; X. Yan; C. Yang; C. Yang; H. Yang; L. Yang; M. Yang; Y. Yang; Y. Yang; Y. Yang; E. Yanovich; Y. Yao; M. Ye; X. Ye; U. Yegin; F. Yermia; Z. You; B. Yu; C. Yu; C. Yu; G. Yu; Z. Yu; Y. Yuan; Z. Yuan; M. Zanetti; P. Zeng; S. Zeng; T. Zeng; L. Zhan; C. Zhang; F. Zhang; G. Zhang; H. Zhang; J. Zhang; J. Zhang; J. Zhang; K. Zhang; P. Zhang; Q. Zhang; T. Zhang; X. Zhang; X. Zhang; Y. Zhang; Y. Zhang; Y. Zhang; Y. Zhang; Y. Zhang; Y. Zhang; Z. Zhang; Z. Zhang; J. Zhao; M. Zhao; T. Zhao; Y. Zhao; H. Zheng; M. Zheng; X. Zheng; Y. Zheng; W. Zhong; G. Zhou; J. Zhou; L. Zhou; N. Zhou; R. Zhou; S. Zhou; W. Zhou; X. Zhou; Y. Zhou; H. Zhu; K. Zhu; H. Zhuang; L. Zong; J. Zou

    2015-09-28

    The Jiangmen Underground Neutrino Observatory (JUNO) is proposed to determine the neutrino mass hierarchy using an underground liquid scintillator detector. It is located 53 km away from both Yangjiang and Taishan Nuclear Power Plants in Guangdong, China. The experimental hall, spanning more than 50 meters, is under a granite mountain of over 700 m overburden. Within six years of running, the detection of reactor antineutrinos can resolve the neutrino mass hierarchy at a confidence level of 3-4$\\sigma$, and determine neutrino oscillation parameters $\\sin^2\\theta_{12}$, $\\Delta m^2_{21}$, and $|\\Delta m^2_{ee}|$ to an accuracy of better than 1%. The JUNO detector can be also used to study terrestrial and extra-terrestrial neutrinos and new physics beyond the Standard Model. The central detector contains 20,000 tons liquid scintillator with an acrylic sphere of 35 m in diameter. $\\sim$17,000 508-mm diameter PMTs with high quantum efficiency provide $\\sim$75% optical coverage. The current choice of the liquid scintillator is: linear alkyl benzene (LAB) as the solvent, plus PPO as the scintillation fluor and a wavelength-shifter (Bis-MSB). The number of detected photoelectrons per MeV is larger than 1,100 and the energy resolution is expected to be 3% at 1 MeV. The calibration system is designed to deploy multiple sources to cover the entire energy range of reactor antineutrinos, and to achieve a full-volume position coverage inside the detector. The veto system is used for muon detection, muon induced background study and reduction. It consists of a Water Cherenkov detector and a Top Tracker system. The readout system, the detector control system and the offline system insure efficient and stable data acquisition and processing.

  6. Conceptual design summary

    SciTech Connect (OSTI)

    Peretz, F.J.

    1992-09-01

    The Advanced Neutron Source (ANS) is a new basic and applied research facility based on a powerful steady-state research reactor that provides beams of neutrons for measurements and experiments in the fields of materials science and engineering, biology, chemistry, materials analysis, and nuclear science. The useful neutron flux for these experiments will be at least five times, and in some cases twenty times, more than is available at the world`s best existing facilities. In addition, ANS will provide irradiation capabilities for the production of radioisotopes for medical applications, research, and industry and facilities for materials irradiation testing. The need for a new steady-state neutron research facility in the United States was emphasized by the 1984 National Academy Report and confirmed by the Department of Energy`s (DOE`s) Energy Research Advisory Board in 1985. These studies defined a minimum thermal neutron flux requirement of 5 {times} 10{sup 19} m{sup {minus}2} {center_dot} s{sup {minus}1}. The National Steering Committee for an Advanced Neutron Source, with representation from the major fields of science that will use the facility, was established in 1986 and has continued to define the performance requirements and instrument layouts needed by the user community. To minimize technical risks and safety issues, the project adopted a policy of not relying upon new inventions to meet the minimum performance criteria, and the design presented in this report is built on technologies already used in other facilities and development programs: for example, the involute aluminum-clad fuel plates common to HFIR and ILL and the uranium silicide fuel developed in DOE`s Reduced Enrichment for Research and Test Reactors program and tested in reactors worldwide. At the same time, every state-of-the-art technique has been implemented to optimize neutron beam delivery at the experiments.

  7. Conceptual design summary

    SciTech Connect (OSTI)

    Peretz, F.J.

    1992-09-01

    The Advanced Neutron Source (ANS) is a new basic and applied research facility based on a powerful steady-state research reactor that provides beams of neutrons for measurements and experiments in the fields of materials science and engineering, biology, chemistry, materials analysis, and nuclear science. The useful neutron flux for these experiments will be at least five times, and in some cases twenty times, more than is available at the world's best existing facilities. In addition, ANS will provide irradiation capabilities for the production of radioisotopes for medical applications, research, and industry and facilities for materials irradiation testing. The need for a new steady-state neutron research facility in the United States was emphasized by the 1984 National Academy Report and confirmed by the Department of Energy's (DOE's) Energy Research Advisory Board in 1985. These studies defined a minimum thermal neutron flux requirement of 5 {times} 10{sup 19} m{sup {minus}2} {center dot} s{sup {minus}1}. The National Steering Committee for an Advanced Neutron Source, with representation from the major fields of science that will use the facility, was established in 1986 and has continued to define the performance requirements and instrument layouts needed by the user community. To minimize technical risks and safety issues, the project adopted a policy of not relying upon new inventions to meet the minimum performance criteria, and the design presented in this report is built on technologies already used in other facilities and development programs: for example, the involute aluminum-clad fuel plates common to HFIR and ILL and the uranium silicide fuel developed in DOE's Reduced Enrichment for Research and Test Reactors program and tested in reactors worldwide. At the same time, every state-of-the-art technique has been implemented to optimize neutron beam delivery at the experiments.

  8. Water Network Design by MINLP

    E-Print Network [OSTI]

    2008-02-12

    We propose a solution method for a water-network optimization problem using a ... The optimal design of a WDN (Water Distribution Network) consists, in its ...

  9. Material-based design computation

    E-Print Network [OSTI]

    Oxman, Neri

    2010-01-01

    The institutionalized separation between form, structure and material, deeply embedded in modernist design theory, paralleled by a methodological partitioning between modeling, analysis and fabrication, resulted in ...

  10. Design Considerations for Fire Safety 

    E-Print Network [OSTI]

    Wilson, A. Grant; Schmidt, William A.; Degenkolb, John G.; Reilly, Edward J.; Robinson, A. Pitts; Sandvik, Robert G.; Semple, J. Brooks

    1971-01-28

    Papers presented at the Symposium on Design Considerations for Fire Safety at the Semiannual Meeting of The American Society of Heating, Refrigerating and Air-conditioning Engineers

  11. Nuclear Power Plant Design Project

    E-Print Network [OSTI]

    Nuclear Power Plant Design Project A Response to the Environmental and Economic Challenge Of Global) .................................................................... 14 4.4 High Temperature Gas Reactor

  12. Advanced Building Systems & Architectural Design

    E-Print Network [OSTI]

    Subramanian, Venkat

    primary research interests are whole building performance analysis, passive Advanced Building Systems & Architectural Design University with a Ph.D. in Building Performance and Diagnostics. Currently he

  13. Automated solar collector installation design

    DOE Patents [OSTI]

    Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

    2014-08-26

    Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives.

  14. SEISMIC DESIGN PROVISIONS -THE CANADIAN HIGHWAY BRIDGE DESIGN CODE

    E-Print Network [OSTI]

    Bruneau, Michel

    in the 1994 American Association of State Highway and Transportation Officials Load and Resistance Factor Code in the 1994 American Association of State Highway and Transportation Officials Load and Resistance Factor CodeSEISMIC DESIGN PROVISIONS - THE CANADIAN HIGHWAY BRIDGE DESIGN CODE Denis MITCHELL Mc

  15. )-Optimal Supersaturated Designs Constructed From Incomplete Block Designs

    E-Print Network [OSTI]

    Nguyen, Nam-Ky

    of runs. Some examples of SDs are Plackett­Burman designs (Plackett and Burman 1946), p- efficient designs- fecting the thermal performance of project homes: wall insula- tion (R1 or R2), roof insulation (R2.5 or R

  16. INTERNATIONAL DESIGN CONFERENCE -DESIGN 2004 Dubrovnik, May 18 -21, 2004.

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    to order. These companies are designing their products according to customer specifications, by modifying dimensions and/or parameters. - Family models creation of a part or assembly. 3. Top-down design methodology Top-Down methodology is a problem solving mechanism whereby a given problem is successively broken

  17. Identify key design elements of desired function

    E-Print Network [OSTI]

    Nawroth, Janna C.

    DESIGN Identify key design elements of desired function Identify functionally equivalent implementation of key design elements (e.g. structure, physiology, kinematics etc.) Quantify functional and standardize fabrication for repeatability . Test phase: Quantify implementation of key design elements

  18. Invitation to our Design Trade Show Managing New Product Design: Design Theory and Methods

    E-Print Network [OSTI]

    Agogino, Alice M.

    ­ For those design researchers seeking collaboration, we provide a platform to generate that is activated by changes in car speed. 7. Ergonomic Laptop Case ­ A laptop case

  19. Alex Burnap1 Design Science,

    E-Print Network [OSTI]

    Papalambros, Panos

    to evaluate ergonomics; however, for some objective attributes such as maintainability, physics on Crowdsourced Design Evaluation Crowdsourced evaluation is a promising method of evaluating engineering design and diverse crowd, particularly when only a small subset of evaluators has the expertise to give correct

  20. Architecture and Environmental Building Design

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    1 56% 2% 7% 2% 5% 28% Architecture and Environmental Building Design 33% response rate Full Seeking Employment as of the date they completed the survey- 27% 69% 19% 12% Landscape Architecture 46" Architecture, Master of Architecture (M.Arch) Fulltime Employment Amanda Levete Architects, Design, Part II

  1. Novette chain design and performance

    SciTech Connect (OSTI)

    Hunt, J.T.; Speck, D.R.

    1980-12-11

    The design and performance of the Novette laser system, which is a two-beam, two-wavelength (1.05 ..mu.. and 0.53 ..mu..) target irradiation facility using phosphate glass laser chains, are discussed with information on the glass properties, controlling factors in the design selection, and projected performance with varying operating conditions. (LCL)

  2. NASA CR-187041 DESIGN PROGRAM

    E-Print Network [OSTI]

    Rathbun, Julie A.

    NASA CR- 187041 ADVANCED DESIGN PROGRAM Proceedings of the 6 t h Annual Summer Conference University Advanced Design Program Hosted by NASA Lewis Research Center June I 1-15,1990 NATIONAL AERONAUTICS & SPACE ADMINISTRATION UNIVERSITIES SPACE RESEARCH ASSOCIATION #12;#12;#12;#12;#12;#12;NASA

  3. Pavement Design TTP Orientation Seminar

    E-Print Network [OSTI]

    Handy, Susan L.

    ;YearsInfrastructure Pavement Research 1995-2025 Reconstruction Reconstruction, Materials Optimization-1980 Deployment Materials, Design, Cost Allocation 1970-2050 Management M & R Scheduling, Condition Assessment #12, Traffic Considerations, ReDesign 2010-2050 Sustainability Materials ReUse, Vehicle/Pavement Interaction

  4. MINIMARS conceptual design: Final report

    SciTech Connect (OSTI)

    Lee, J.D.

    1986-09-01

    This volume contains the following sections: (1) fueling systems; (2) blanket; (3) alternative blanket concepts; (4) halo scraper/direct converter system study and final conceptual design; (5) heat-transport and power-conversion systems; (6) tritium systems; (7) minimars air detritiation system; (8) appropriate radiological safety design criteria; and (9) cost estimate. (MOW)

  5. Zinc-bromine cell design

    SciTech Connect (OSTI)

    Bellows, R.

    1983-11-30

    A set of slides is reproduced which illustrates the design of a zinc-bromine circulating battery. Low-cost manufacturing techniques and scale-up rationale are outlined, and design parameters are listed. Also outlined is a computer model of the zinc-bromine battery. (LEW)

  6. Engineering by Design Ocean Engineering

    E-Print Network [OSTI]

    Virginia Tech

    Engineering by Design Ocean Engineering Bachelor of Science Degree Virginia Tech For more engineering is a diverse field. At Virginia Tech, the major focus areas are ocean energy systems and ocean in the aerospace and related industries and in the shipbuilding, naval engineering, and ship design fields. Some

  7. SUSTAINABLE ENERGY UTILITY DESIGN: OPTIONS

    E-Print Network [OSTI]

    Delaware, University of

    SUSTAINABLE ENERGY UTILITY DESIGN: OPTIONS FOR THE CITY OF SEOUL FINAL REPORT TO SEOUL DEVELOPMENT INSTITUTE APRIL 2008 #12;#12;SUSTAINABLE ENERGY UTILITY DESIGN: OPTIONS FOR THE CITY OF SEOUL Final Report....................................................................................i 1. A New Model for Sustainable Energy Service Delivery.....................1 2. Learning form

  8. Design Process Faculty & Student Interviews

    E-Print Network [OSTI]

    Design Process Faculty & Student Interviews Prompted user feedback of the "Freemium" model to understand consumer desires, needs and habits Bookstore Focus Group Confirmed user needs and generated design Daniel E. Sandoval June 2015 'Fixing the Broken Textbook Market: How Students Respond to High Textbook

  9. Introduction to Interactive Web Design

    E-Print Network [OSTI]

    Hickey, Timothy J.

    Introduction to Interactive Web Design Timothy J. Hickey Associate Professor of Computer Science . . . . . . . . . . . . . . . . 17 1.4 Web Browsers and Servers . . . . . . . . . . . . . . . . . . . . . . 17 1.5 URLs and Domain . . . . . . . . . . . . . . . . . . . . . . . . . . 22 I Static Web Site Design 23 2 HTML 27 2.1 Simple HTML elements

  10. Overview of the International Design

    E-Print Network [OSTI]

    McDonald, Kirk

    at ejection. Example with 6 bunches #12;12 Linac-based proton Driver Project X design criteria: 2 MW of beamOverview of the International Design for the Neutrino Factory (IDSNF) Accelerator systems G. Prior European Organization for Nuclear Research (CERN) Muon acceleration for particle physics & MICE

  11. PROCESS DESIGN AND OPTIMIZATION OF CELLULOSE HYDROLYSIS

    E-Print Network [OSTI]

    Lindsey, R.R.

    2011-01-01

    Process Design and Economic Evaluation . • Determination ofOPTIMAL PROCESS DESIGN AND ECONOMIC EVALUATION Based on the

  12. Proactive Strategies for Designing Thermoelectric Materials for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Proactive Strategies for Designing Thermoelectric Materials for Power Generation Proactive Strategies for Designing Thermoelectric...

  13. Mechanism Design and Truthful Ocan Sankur

    E-Print Network [OSTI]

    Doyen, Laurent

    Mechanism Design and Truthful Algorithms Ocan Sankur 13/06/2013 Ocan Sankur (ULB) Mechanism Design and Truthful Algorithms June 13, 2013 1 / 25 #12;Mechanism Design Mechanism design is about designing games mechanisms where the best strategy is to tell the truth. Ocan Sankur (ULB) Mechanism Design and Truthful

  14. RTL Hardware Design Chapter 13 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 13 1 HIERARCHICAL DESIGN #12;RTL Hardware Design by P. Chu constructs #12;RTL Hardware Design by P. Chu Chapter 13 3 1. Introduction · How to deal with 1M gates or more? · Hierarchical design ­ Divided-and-conquer strategy ­ Divide a system into smaller parts #12;RTL Hardware Design

  15. RTL Hardware Design Chapter 13 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 13 1 HIERARCHICAL DESIGN RTL Hardware Design by P. Chu constructs RTL Hardware Design by P. Chu Chapter 13 3 1. Introduction · How to deal with 1M gates or more? · Hierarchical design ­ Divided-and-conquer strategy ­ Divide a system into smaller parts RTL Hardware Design

  16. RTL Hardware Design Chapter 9 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 9 1 Sequential Circuit Design: Practice RTL Hardware Design temporary storage 4. Pipelined circuit RTL Hardware Design by P. Chu Chapter 9 3 1. Poor design practice) ­ Misuse of asynchronous reset ­ Misuse of gated clock ­ Misuse of derived clock RTL Hardware Design by P

  17. RTL Hardware Design Chapter 3 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 3 1 Basic Language Constructs of VHDL #12;RTL Hardware Design. Data type and operators #12;RTL Hardware Design by P. Chu Chapter 3 3 1. Basic VHDL program #12;RTL Hardware Design by P. Chu Chapter 3 4 Design unit · Building blocks in a VHDL program · Each design unit

  18. Introduction to the Design of Embedded

    E-Print Network [OSTI]

    Bae, Doo-Hwan

    Specification HW & SW P titi ·Designers partition the system into hardware and software early in the flow HW & SW Partition HW Development Test not passed ·HW and SW engineers design their respective components co-design Platform-based design ... KAIST SE LAB 2008 9/35 #12;HW & SW Co-Design Part II. Designing

  19. Integrated design : a generative multi-performative design approach

    E-Print Network [OSTI]

    Fasoulaki, Eleftheria

    2008-01-01

    There are building systems, called "modularized", in which the component systems (for structure, lighting, etc) can be analyzed and synthesized independently since their performance and design do not interact or affect one ...

  20. The expedition of expertise : designing an expert system for design

    E-Print Network [OSTI]

    Isenstadt, Samuel M. (Samuel Marc)

    1985-01-01

    Principal assumptions are made during the early stage of the design process, fixing 70% to 80% of total building costs and most of a building's architectural and environmental qualities. The demands of any one constraint ...

  1. Reliability in the design phase

    SciTech Connect (OSTI)

    Siahpush, A.S.; Hills, S.W.; Pham, H. (EG and G Idaho, Inc., Idaho Falls, ID (United States)); Majumdar, D. (USDOE Idaho Field Office, Idaho Falls, ID (United States))

    1991-12-01

    A study was performed to determine the common methods and tools that are available to calculated or predict a system's reliability. A literature review and software survey are included. The desired product of this developmental work is a tool for the system designer to use in the early design phase so that the final design will achieve the desired system reliability without lengthy testing and rework. Three computer programs were written which provide the first attempt at fulfilling this need. The programs are described and a case study is presented for each one. This is a continuing effort which will be furthered in FY-1992. 10 refs.

  2. Reliability in the design phase

    SciTech Connect (OSTI)

    Siahpush, A.S.; Hills, S.W.; Pham, H. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Majumdar, D. [USDOE Idaho Field Office, Idaho Falls, ID (United States)

    1991-12-01

    A study was performed to determine the common methods and tools that are available to calculated or predict a system`s reliability. A literature review and software survey are included. The desired product of this developmental work is a tool for the system designer to use in the early design phase so that the final design will achieve the desired system reliability without lengthy testing and rework. Three computer programs were written which provide the first attempt at fulfilling this need. The programs are described and a case study is presented for each one. This is a continuing effort which will be furthered in FY-1992. 10 refs.

  3. High Speed ADC Design Methodology

    E-Print Network [OSTI]

    Tang, He

    2010-01-01

    simulated using 90nm foundry CMOS process. Cut?off flash ADC in a 90nm foundry CMOS process. The ADC coreflash ADC was designed in a foundry 0.13um CMOS technology.

  4. Designing Water Smart Landscapes Activity

    E-Print Network [OSTI]

    Designing Water Smart Landscapes Activity Objective: Create a water smart home landscape. Materials://aggie-horticulture.tamu.edu/plantanswers/publications/publications.html Draw the plants, using tracing paper. Citizenship Activity Develop a water smart plan for a non

  5. Mechanical design of flow batteries

    E-Print Network [OSTI]

    Hopkins, Brandon J. (Brandon James)

    2013-01-01

    The purpose of this research is to investigate the design of low-cost, high-efficiency flow batteries. Researchers are searching for next-generation battery materials, and this thesis presents a systems analysis encompassing ...

  6. ALSEP DESIGN SUMMARY Presentation Material

    E-Print Network [OSTI]

    Rathbun, Julie A.

    ALSEP DESIGN SUMMARY Presentation Material BSR-2900 17 - 20 March 1970 NASA/MSC - Bendix Aerospace PASSIVE SEISMIC EXPERIMENT fR,... SUBPACKAGE NO. 2 "' ALSEP IN STOWED CONFIGURATION \\UIII'AI.¥Am ~~. I ~IN

  7. ORISE: Instructional Design and Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    simulations Self-paced tutorials Guided instructions Point-of-use job aids and just-in-time training Full-function exercises and drills Instructional Design and Development...

  8. Thick psychophysiology for empathic design

    E-Print Network [OSTI]

    Hedman, Elliott B. (Elliot Bruce)

    2014-01-01

    Over the course of six years, I brought ambulatory psychophysiology into a variety of industries as a means of conducting design research. I looked at the stress of children in occupational therapy, the frustration of ...

  9. Goal-oriented hardware design

    E-Print Network [OSTI]

    Chau, Man Ping Grace

    2008-01-01

    This thesis presents Fide, a hardware design system that uses Goal-oriented programming. Goal-oriented programming is a programming framework to specify open-ended decision logic. This approach relies on two fundamental ...

  10. Modular design of biological systems

    E-Print Network [OSTI]

    Norville, Julie Erin, 1980-

    2012-01-01

    The focus of my research is the development of technology for building compound biological systems from simpler pieces. I designed BioScaffold parts, a family of variable regions that can be inserted into a DNA sequence ...

  11. Center for Energy Efficient Design

    High Performance Buildings Database

    Rocky Mount, VA As the first Passivhaus public school in North America, the Center for Energy Efficient Design (CEED) in Rocky Mount, Virginia, is a national model for green school construction. An extension of The Leonard A.

  12. Design approaches to structural optimization

    E-Print Network [OSTI]

    Tayar, Memduh Ali

    1986-01-01

    The objective of this thesis is to develop design approaches to structural optimization. In the example of three-dimensional grid structures, widely known as 'space frames', possible configurations are explored which ...

  13. Arduino Board Design Nicholas Skadberg

    E-Print Network [OSTI]

    Kachroo, Pushkin

    Arduino Board Design Nicholas Skadberg 4/30/09 EE290 Dr. Pushkin Kachroo #12;Abstract In an effort an Arduino Atmega 168 controller chip and an Arduino Duemilanove circuit board. The device is controlled

  14. Evaluating Packaged Steam Generator Designs 

    E-Print Network [OSTI]

    Ganapathy, V.

    1997-01-01

    carefully. First cost alone should not be the basis for their selection. This paper outlines some of the important design aspects of packaged boilers and how they affect boiler performance and operating costs. Suggestions are also made for proper evaluation...

  15. Exceeding Energy Consumption Design Expectations 

    E-Print Network [OSTI]

    Castleton, H. F.; Beck, S. B. M.; Hathwat, E. A.; Murphy, E.

    2013-01-01

    Operational building performance often fails to meet that predicted at the design stage by as much as two to three times. Many reasons for this difference have been identified and widely reported, however, the problem still continues to occur. A...

  16. Implementing Safeguards-by-Design

    SciTech Connect (OSTI)

    Trond Bjornard; Robert Bean; Phillip Casey Durst; John Hockert; James Morgan

    2010-02-01

    Executive Summary Excerpt Safeguards-by-Design (SBD) is an approach to the design and construction of nuclear facilities whereby safeguards are designed-in from the very beginning. It is a systematic and structured approach for fully integrating international and national safeguards (MC&A), physical security, and other proliferation barriers into the design and construction process for nuclear facilities. SBD is primarily a project management or project coordination challenge, and this report focuses on that aspect of SBD. The present report continues the work begun in 2008 and focuses specifically on the design process, or project management and coordination - the planning, definition, organization, coordination, scheduling and interaction of activities of the safeguards experts and stakeholders as they participate in the design and construction of a nuclear facility. It delineates the steps in a nuclear facility design and construction project, in order to provide the project context within which the safeguards design activities take place, describes the involvement of safeguards experts in the design process, the nature of their analyses, interactions and decisions, as well as describing the documents created and how they are used. Designing and constructing a nuclear facility is an extremely complex undertaking. The stakeholders in an actual project are many – owner, operator, State regulators, nuclear facility primary contractor, subcontractors (e.g. instrument suppliers), architect engineers, project management team, safeguards, safety and security experts, in addition to the IAEA and its team. The purpose of the present report is to provide a common basis for discussions amongst stakeholders to collaboratively develop a SBD approach that will be both practically useful and mutually beneficial. The principal conclusions from the present study are: • In the short term, the successful implementation of SBD is principally a project management problem. • Life-cycle cost analysis can be a useful tool in safeguards design. • An important obstacle to straight forward application of life-cycle cost analysis is that there is no single organization responsible for the entire life-cycle cost of the facility. • The Safeguards Effectiveness Report (SGER) is proposed as a focus for the safeguards design activities, and is intended to be a living document that contains increasing safeguards relevant scope and content as the facility design emerges. Further work is required in a number of areas. The authors note that other studies supported by NGSI are addressing the development of requirements and performance criteria, as well as contributing to the design toolkit through the development of technology, methodology, and safeguards guidelines for designers. With respect to further development of the SBD design process, the authors recommend: • In the short term, conduct a workshop with interested industry representatives, to ensure that their perspectives and needs are factored into further development. • In the short term, provide NGSI SBD project documents to IAEA, and support them in the conduct of an ‘SBD Workshop II.” • In the medium term, continue to support the SBD demonstration work started with the Next Generation Nuclear Plant project. • In the longer term, conduct further studies to examine the integration of SBD into projects with concurrent consideration of physical security and safety.

  17. Baroque Sensation in Modern Design 

    E-Print Network [OSTI]

    Mason, Jordan 1986-

    2011-05-02

    to collect the necessary data. Ultimately, the structure of this entire research project allows for the compilation of a template for how to incorporate, what I define as the human connection into the modern design process....

  18. SHORT PROGRAMS Materials By Design

    E-Print Network [OSTI]

    Entekhabi, Dara

    techniques including 3D printing, self-assembly, microfluidics and other technologies. We will distribute and analyze material samples designed based on multiscale simulations and manufactured using 3D printing

  19. Weelchair exercise roller product design

    E-Print Network [OSTI]

    Su, Benjamin W

    2005-01-01

    Inspired by bicycle training rollers, a wheelchair exercise roller (an exercise machine for the application of wheelchair users) was designed from conception of idea to alpha prototype. Background and market data was ...

  20. Audience Design in Word Order 

    E-Print Network [OSTI]

    Melville, Margot

    2013-11-27

    When we speak, we adapt what we say according to our listeners. This ability is established at the levels of concepts and lexical choice, but it is less certain whether audience design is possible in grammatical structure. ...

  1. PV PLANNER A DESIGN AND

    E-Print Network [OSTI]

    Delaware, University of

    PV PLANNER A DESIGN AND ANALYSIS TOOL FOR BUILDING INTEGRATED SOLAR ELECTRIC SYSTEMS FINAL Center for Energy and Environmental Policy University of Delaware December 2006 #12;#12;PV...............................................................................................................................1 1.2 PV Planner: An Overview

  2. Contemporary Strategies for Sustainable Design 

    E-Print Network [OSTI]

    Farias, Francisco

    2013-04-05

    , are encouraging design that reduces energy consumption and carbon footprint. The importance of energy analysis up-front in the building design process is crucial to tame the impact of buildings on climate change and reduce life cycle costs of facilities... of buildings is a major concern in this era of global warming and environmental issues. The reduction of both carbon dioxide emissions and the consumption of fossil fuels are paramount in trying to palliate global warming. Institutions such as the U...

  3. TAPS design concepts: environmental concerns

    SciTech Connect (OSTI)

    Turner, M.J.

    1981-05-01

    The engineering concepts used in the design, construction, and operation of the Trans-Alaska Pipeline System (TAPS) were often new and in many cases in the state of the art. To accommodate environmental concerns for operating a hot oil pipeline in permafrost soil, unique features were incorporated into TAPS. Design concepts include a sophisticated leak detection and internal pipeline monitoring system. Additional features for accommodating thaw-unstable soils, earthquakes, and river systems are described. (23 references)

  4. The TPX Cryostat Conceptual Design

    SciTech Connect (OSTI)

    Ravenscroft, D.; Posey, A.; Heitzenroeder, P.; Brown, T.

    1993-10-06

    The TPX (Tokamak Physics Experiment) will be the first tokamak to employ both superconducting TF (toroidal field) and PF (poloidal field) magnets. Consequently, the entire device is located within an evacuated cryostat to provide the necessary thermal barrier between the ambient temperature test cell and the magnets that are cooled by supercritical liquid helium at 5{degrees}K. This paper describes the cryostat design requirements, design concepts, and the cryostat fabrication and installation.

  5. Campus Planning + Design -Role and Responsibilities Campus Planning + Design is responsible for the planning, design and implementation

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    and estimates. Approved project requests then proceed to design, bidding, and construction completion. Campus preparation, Contract Design Management, Architectural Design, Interior Design and furnishings, Site Planning The staff of Campus Planning + Design routinely examines the physical campus and individual project requests

  6. Determination of Ranged Sets of Design Specifications by Incorporating Design Space Heterogeneity

    E-Print Network [OSTI]

    Chen, Wei

    method is developed for obtaining a ranged set of design specifications that meets design criteria while well they meet design criteria. Second, a new design flexibility measure is used as a metric to select s in a design attribute space F single or multiple design criteria Ij(y) influence function of a design

  7. Y-12 Sustainable Design Principles for Building Design and Construction

    SciTech Connect (OSTI)

    Jackson, J. G.

    2008-11-01

    B&W Y-12 is committed to modernizing the Y-12 complex to meet future needs with a sustainable and responsive infrastructure and to integrating sustainability principles and practices into Y-12 work (Y72-001, B&W Y-12 Environmental, Safety and Health Policy). This commitment to sustainability and specifically sustainable design of buildings is also incorporated into Presidential Executive Orders (EO), DOE Orders (DOE O), and goals. Sustainable building design is an approach to design, construct, and operate facilities in an efficient and environmentally sound manner that will produce a healthful, resource-efficient and productive working environment that is inherently protective of the environment. The DOE has established the following 5 Guiding Principles for High Performance Sustainable Building (HPSB), and has issued directives that require Y-12 to incorporate the principles and a number of supporting specific practices and techniques into building design, construction and renovation projects: (1) Employ Integrated Design Principles; (2) Optimize Energy Performance; (3) Protect and Conserve Water; (4) Enhance Indoor Environmental Quality; and (5) Reduce Environmental Impact of Materials. The purpose of this document is to present the required sustainable building principles, practices and techniques, summarize the key drivers for incorporating them into Y-12 projects, and present additional recommendations and resources that can be used to support sustainable buildings to enhance the environmental and economic performance of the Y-12 Complex.

  8. Design-for-empowerment-for-design : computational structures for design democratization

    E-Print Network [OSTI]

    Vardouli, Theodora

    2012-01-01

    The vision to engage non-architects in the design of their habitat through the mediation of computer aids, dates back to the early computational era (1960s-1970s) and is currently being recast under cyber-cultural and ...

  9. Complexity Management in System-level Design

    E-Print Network [OSTI]

    California at Berkeley, University of

    , and work with a range of constraints and optimization criteria. This design process is quite complex1 of 22 Complexity Management in System-level Design Asawaree Kalavade Edward A. Lee Keywords design space exploration, hardware-software codesign, design methodology management, design flow

  10. RTL Hardware Design Chapter 10 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 10 1 Finite State Machine #12;RTL Hardware Design by P. Chu. FSM design examples #12;RTL Hardware Design by P. Chu Chapter 10 3 1. Overview on FSM · Contain output #12;RTL Hardware Design by P. Chu Chapter 10 4 2. Representation of FSM · State diagram #12;RTL

  11. RTL Hardware Design Chapter 10 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 10 1 Finite State Machine RTL Hardware Design by P. Chu. FSM design examples RTL Hardware Design by P. Chu Chapter 10 3 1. Overview on FSM · Contain "random RTL Hardware Design by P. Chu Chapter 10 4 2. Representation of FSM · State diagram RTL Hardware

  12. RTL Hardware Design Chapter 9 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 9 1 Sequential Circuit Design: Practice #12;RTL Hardware as fast temporary storage 4. Pipelined circuit #12;RTL Hardware Design by P. Chu Chapter 9 3 1. Poor #12;RTL Hardware Design by P. Chu Chapter 9 4 Misuse of asynchronous reset · Poor design: use reset

  13. Techniques and Trends for Embedded System Design

    E-Print Network [OSTI]

    Bae, Doo-Hwan

    Techniques and Trends for Embedded System Design & Energy Estimation and Low-Power Design;Contents Introduction Techniques and trends for embedded system design Power estimation and low-powerHW development High cost & inefficient design loop Early separation of HW and SW Long design time/ high cost

  14. Passive solar design handbook. Volume III. Passive solar design analysis

    SciTech Connect (OSTI)

    Jones, R.W.; Balcomb, J.D.; Kosiewicz, C.E.; Lazarus, G.S.; McFarland, R.D.; Wray, W.O.

    1982-07-01

    Simple analytical methods concerning the design of passive solar heating systems are presented with an emphasis on the average annual heating energy consumption. Key terminology and methods are reviewed. The solar load ratio (SLR) is defined, and its relationship to analysis methods is reviewed. The annual calculation, or Load Collector Ratio (LCR) method, is outlined. Sensitivity data are discussed. Information is presented on balancing conservation and passive solar strategies in building design. Detailed analysis data are presented for direct gain and sunspace systems, and details of the systems are described. Key design parameters are discussed in terms of their impact on annual heating performance of the building. These are the sensitivity data. The SLR correlations for the respective system types are described. The monthly calculation, or SLR method, based on the SLR correlations, is reviewed. Performance data are given for 9 direct gain systems and 15 water wall and 42 Trombe wall systems. (LEW)

  15. A new approach to the detail design phase of the IIDE Design Process through insights from software design 

    E-Print Network [OSTI]

    Bhat, Gireesh Keshav

    2002-01-01

    The Engineering Design Process has been described in different ways by means of different approaches. Attempts to compare the Design Process in mechanical engineering with design in other fields have been made. This thesis compares the IIDE...

  16. An integrated mechanical design concept for the final focusing region for the HIF point design

    E-Print Network [OSTI]

    2002-01-01

    N. Andreev et al, "Mechanical Design and Analysis of LHCAn Integrated Mechanical Design Concept for the Finalfirst cut" integrated mechanical design concept of the final

  17. System 80+{trademark} Standard Design: CESSAR design certification. Volume 13

    SciTech Connect (OSTI)

    1997-12-31

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. This document describes the Combustion Engineering, Inc. System 80+{trademark} Standard Design. This volume contains sections 2 thru 7 of Chapter 15 -- Accident Analyses. Topics covered are: decrease in heat removal by the secondary system; decrease in reactor coolant flow rate; reactivity and power distribution anomalies; increase in RCS inventory; decrease in RCS inventory; and radioactive material release from a system or component. Appendices 15A, 15B, and 15C are included.

  18. Advanced Design Studies. Final report

    SciTech Connect (OSTI)

    Steiner, Don [Rensselaer Polytechnic Institute, Troy, NY (United States)

    2012-12-01

    The ARIES-CS project was a multi-year multi-institutional project to assess the feasibility of a compact stellarator as a fusion power plant. The work herein describes efforts to help design one aspect of the device, the divertor, which is responsible for the removal of particle and heat flux from the system, acting as the first point of contact between the magnetically confined hot plasma and the outside world. Specifically, its location and topology are explored, extending previous work on the sub ject. An optimized design is determined for the thermal particle flux using a suite of 3D stellarator design codes which trace magnetic field lines from just inside the confined plasma edge to their strike points on divertor plates. These divertor plates are specified with a newly developed plate design code. It is found that a satisfactory thermal design exists which maintains the plate temperature and heat load distribution below tolerable engineering limits. The design is unique, including a toroidal taper on the outboard plates which was found to be important to our results. The maximum thermal heat flux for the final design was 3.61 M W/m2 and the maximum peaking factor was 10.3, below prescribed limits of 10 M W/m2 and 15.6, respectively. The median length of field lines reaching the plates is about 250 m and their average angle of inclination to the surface is 2 deg. Finally, an analysis of the fast alphas, resulting from fusion in the core, which escape the plasma was performed. A method is developed for obtaining the mapping from magnetic coordinates to real-space coordinates for the ARIES-CS. This allows the alpha exit locations to be identified in real space for the first time. These were then traced using the field line algorithm as well as a guiding center routine accounting for their mass, charge, and specific direction and energy. Results show that the current design is inadequate for accommodating the alpha heat flux, capturing at most 1/3 of lost alphas. However the distribution of the alphas on the device first wall indicates that a viable solution likely exists. It is noted that future designs must be sought which specifically address the fusion alphas through an integrated approach involving physics and engineering teams.

  19. An analysis of architectural design process 

    E-Print Network [OSTI]

    Leveridge, Yolanda Kay

    2013-02-22

    of architectural pedagogy. Several schools of thought exist on architectural design process. Consequently, several different basic design processes are taught within architecture programs. This paper analyzes two different design processes: one experienced...

  20. Design exploration through bidirectional modeling of constraints

    E-Print Network [OSTI]

    Kilian, Axel, 1971-

    2006-01-01

    Today digital models for design exploration are not used to their full potential. The research efforts in the past decades have placed geometric design representations firmly at the center of digital design environments. ...

  1. Contestational design : innovation for political activism

    E-Print Network [OSTI]

    Hirsch, Edward A., 1970-

    2008-01-01

    This thesis presents contestational design, a unique form of design activity whose aim is promote particular agendas in contested political arenas. I propose a framework for analyzing contestational design processes, which ...

  2. Cooling airflow design calculations for UFAD

    E-Print Network [OSTI]

    Bauman, Fred; Webster, Tom; Benedek, Corinne

    2007-01-01

    Diffuser design ratio (DDR) = (actual diffuser airflow)/(the concept of a diffuser design ratio (DDR) is introduced.DDR is defined as the ratio of actual airflow to design

  3. A new polyhedral approach to combinatorial designs 

    E-Print Network [OSTI]

    Arambula Mercado, Ivette

    2004-09-30

    We consider combinatorial t-design problems as discrete optimization problems. Our motivation is that only a few studies have been done on the use of exact optimization techniques in designs, and that classical methods in design theory have still...

  4. Tools for innovation and conceptual design 

    E-Print Network [OSTI]

    Karuppoor, Srinand Sreedharan

    2004-11-15

    The ability to design is the distinguishing characteristic of an engineer. Recent research has increased our understanding of both the engineering design process and effective means for teaching that process to neophyte design engineers...

  5. Security Design and Information Aggregation in Markets

    E-Print Network [OSTI]

    Chen, Yiling

    Security Design and Information Aggregation in Markets Yiling Chen Anthony M. Kwasnica Abstract that information aggregation ability of markets is affected by the security design. Behavior of individual Keywords: Security design; Information aggregation; Information market; Price convergence. 1 Introduction

  6. Bayesian Algorithmic Mechanism Design [Extended Abstract

    E-Print Network [OSTI]

    Hartline, Jason D.

    Bayesian Algorithmic Mechanism Design [Extended Abstract] Jason D. Hartline Northwestern, Canada blucier@cs.toronto.edu ABSTRACT The principal problem in algorithmic mechanism design approach for designing incen- tive compatible mechanisms, namely that of Vickrey, Clarke, and Groves

  7. A Complementary Design Theory for Doubling

    E-Print Network [OSTI]

    Hongquan Xu; Ching-Shui Cheng

    2011-01-01

    frac- tional factorial designs. Biometrika 90 233–238. [4]of optimal blocking of 2 n?m designs. Ann. Statist. 27 1948–of constructing two-level designs of resolution IV. Ann.

  8. A Complementary Design Theory for Doubling

    E-Print Network [OSTI]

    Xu, Hongquan; Cheng, Ching-Shui

    2006-01-01

    frac- tional factorial designs. Biometrika 90 233–238. [4]of optimal blocking of 2 n?m designs. Ann. Statist. 27 1948–of constructing two-level designs of resolution IV. Ann.

  9. A unified theory of engineering design 

    E-Print Network [OSTI]

    Dyas, Scott Patrick

    2007-04-25

    A theoretical model of design, that is universal and has a scientific basis, was developed. By doing so, it is believed that the practice of engineering design can be significantly improved. A better system of modeling designs is the missing...

  10. Spatial Concepts in GIS and Design, Agenda

    E-Print Network [OSTI]

    Center for Spatial Studies, UCSB; National Center for Geographic Information and Analysis; Esri

    2008-01-01

    Meeting on Spatial Concepts in GIS and Design Santa Barbara,design more fully into GIS, and over the development ofconcepts that lie behind GIS relevant in design?" or "To

  11. Gaussian Quadrature for computer aided robust design

    E-Print Network [OSTI]

    Reber, Geoffrey Scott, 1979-

    2004-01-01

    Computer aided design has allowed many design decisions to be made before hardware is built through "virtual" prototypes: computer simulations of an engineering design. To produce robust systems noise factors must also be ...

  12. Design tool: a software for capturing design intent 

    E-Print Network [OSTI]

    Velamakanni, Ravindra

    1999-01-01

    of the design process that can lead to the development of new tools in this area. A software tool is developed for this purpose. It is basically created as a collection of Visual Basic forms with Excel worksheets and Word documents embedded in them. Each form...

  13. Outline Overview Design Principles Key Points Design Principles

    E-Print Network [OSTI]

    Almulhem, Ahmad

    Engineering Department, KFUPM Spring 2008 Ahmad Almulhem - Network Security Engineering - 2008 1 / 12 #12-Safe Defaults Economy of Mechanism Complete Mediation Open Design Separation of Privilege Least Common Mechanism Psychological Acceptability 3 Key Points Ahmad Almulhem - Network Security Engineering - 2008 2 / 12 #12;Outline

  14. DESIGN OPTIMIZATION IN COMPUTER-AIDED ARCHITECTURAL DESIGN

    E-Print Network [OSTI]

    Michalek, Jeremy J.

    . This paper provides an updated insight into past and current trends of using this engineering design paradigm:ruchi.choudhary@coa.gatech.edu AND JEREMY MICHALEK Department of Mechanical Engineering, University of Michigan, Ann Arbor, USA 48109 software. The distinctions between various formulations and methodologies that are available are rooted

  15. Sharing tacit design knowledge in a distributed design environment 

    E-Print Network [OSTI]

    Woo, Jeong-Han

    2006-10-30

    , and professional insight formed as a result of experience. Due to its implicit nature, tacit design knowledge is typically shared only among colleagues who work in the same office through face-toface interactions. With emerging Computer-Mediated Communication (CMC...

  16. Designing Turbulence Los Alamos Institutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent BondingMeeting |Design Competitions DesigntheDesignerDesignerabout

  17. Design of a Data Analysis System for Walking Robots. A Design Project Report

    E-Print Network [OSTI]

    Ruina, Andy L.

    Design of a Data Analysis System for Walking Robots. A Design Project Report Presented Design Project Report Project title: Design of a Data Analysis System for Walking Robots. Author: Leticia

  18. Photonic Design: From Fundamental Solar Cell Physics to Computational Inverse Design

    E-Print Network [OSTI]

    Miller, Owen Dennis

    2012-01-01

    method to a new solar cell design: a thin-film solar cell incharacterize and design next-generation solar cells. Chapterlies with optical design: The solar cell must be designed

  19. Cooling airflow design calculations for UFAD

    E-Print Network [OSTI]

    Bauman, Fred; Webster, Tom; Benedek, Corinne

    2007-01-01

    written permission. Cooling Airflow Design Calculations form) height. Table 2: Design cooling airflow performance fortool predictions of UFAD cooling airflow rates and associ-

  20. Developing Integrated National Design Standards for Offshore...

    Energy Savers [EERE]

    Developing Integrated National Design Standards for Offshore Wind Plants Developing Integrated National Design Standards for Offshore Wind Plants January 6, 2014 - 10:00am Addthis...

  1. City of Atlanta - Sustainable Development Design Standards |...

    Broader source: Energy.gov (indexed) [DOE]

    space or the total project cost exceeds 2 million. These projects must incorporate sustainable design principles and must meet the Leadership in Energy and Environmental Design...

  2. Reactor Engineering Design | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reactor Engineering Design The Reactor Engineering Design Key Technology will focus on control of chemical reactions with unprecedented precision in increasingly modular and...

  3. Extreme Scale Computing, Co-design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and software designs that map to performance metrics. The objective function designed for optimization has as main components run time (or computational rate), problem size,...

  4. Next Generation Luminaires Design Competition Announces 2014...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next Generation Luminaires Design Competition Announces 2014 Indoor Winners Next Generation Luminaires Design Competition Announces 2014 Indoor Winners September 17, 2014 - 1:53pm...

  5. Chapter 2: Whole-Buildling Design

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the entire project team. whole-building design approach, energy-efficiency and passive-solar design Input from the expanded project team solidifies space strategies can often...

  6. Industrial Energy Efficiency: Designing Effective State Programs...

    Office of Environmental Management (EM)

    Energy Efficiency: Designing Effective State Programs for the Industrial Sector Industrial Energy Efficiency: Designing Effective State Programs for the Industrial Sector This...

  7. Contract, Mechanism Design, and Technological Detail

    E-Print Network [OSTI]

    Watson, Joel

    2006-01-01

    Watson, J. , “Contract and Mechanism Design in Settings withDesign, Adjustment Processes, Mechanisms, and Institutions,”Optimal Coordination Mechanisms in Generalized Principal-

  8. Thermoelectric Materials by Design: Computational Theory and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design: Computational Theory and Structure Thermoelectric Materials by Design: Computational Theory and Structure Presentation from the U.S. DOE Office of Vehicle Technologies...

  9. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design...

    Office of Environmental Management (EM)

    SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Design Checklist This checklist is intended to...

  10. Holistic design for multi-core architectures

    E-Print Network [OSTI]

    Kumar, Rakesh

    2006-01-01

    Design for Adaptability: Power Advantages of A. Discussion of Core Switching . . . . . . . . . . . .power dissipation and expected performance. This simpli?es the design of core- switching

  11. Extreme Scale Computing, Co-design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Extreme Scale Computing, Co-design Informing system design, ensuring productive and efficient code Project Description To address the increasingly complex problems of the modern...

  12. Waterflooding injectate design systems and methods (Patent) ...

    Office of Scientific and Technical Information (OSTI)

    Waterflooding injectate design systems and methods Citation Details In-Document Search Title: Waterflooding injectate design systems and methods You are accessing a document...

  13. Advanced Materials by Design: Programable Transient Electronics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Materials by Design: Programable Transient Electronics Transient materials is an emerging area of materials design with the key attribute being the ability to physically...

  14. System Design - Lessons Learned, Generic Concepts, Characteristics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design - Lessons Learned, Generic Concepts, Characteristics & Impacts System Design - Lessons Learned, Generic Concepts, Characteristics & Impacts Presented at the DOE-DOD...

  15. Thermoelectric Materials by Design, Computational Theory and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by Design, Computational Theory and Structure Thermoelectric Materials by Design, Computational Theory and Structure 2009 DOE Hydrogen Program and Vehicle Technologies Program...

  16. Sagebrush Flat Wildlife Area 2008 Annual Report.

    SciTech Connect (OSTI)

    Peterson, Dan [Washington Department of Fish and Wildlife

    2008-11-03

    The Sagebrush Flat Wildlife Area is a 12,718 acre complex located in Douglas County, Washington. Four distinct management units make up the area: Bridgeport, Chester Butte, Dormaier and Sagebrush Flat. The four Units are located across a wide geographic area within Douglas County. The Units are situated roughly along a north/south line from Bridgeport in the north to the Douglas/Grant county line in the south, 60 miles away. The wildlife area was established to conserve and enhance shrubsteppe habitat for the benefit shrubsteppe obligate and dependent wildlife species. In particular, the Sagebrush Flat Wildlife Area is managed to promote the recovery of three state-listed species: Columbian sharp-tailed grouse (threatened), greater sage grouse (threatened) and the pygmy rabbit (endangered). The US Fish and Wildlife Service also list the pygmy rabbit as endangered. Wildlife area staff seeded 250 acres of old agricultural fields located on the Sagebrush Flat, Dormaier and Chester Butte units. This has been a three project to reestablish high quality shrubsteppe habitat on fields that had either been abandoned (Dormaier) or were dominated by non-native grasses. A mix of 17 native grasses and forbs, most of which were locally collected and grown, was used. First year maintenance included spot spraying Dalmatian toadflax on all sites and mowing annual weeds to reduce competition. Photo points were established and will be integral to long term monitoring and evaluation. Additional monitoring and evaluation will come from existing vegetation transects. This year weed control efforts included spot treatment of noxious weeds, particularly Dalmatian toadflax, in previously restored fields on the Bridgeport Unit (150 acres). Spot treatment also took place within fields scheduled for restoration (40 acres) and in areas where toadflax infestations are small and relatively easily contained. Where toadflax is so widespread that chemical treatment would be impractical, we use the bioagent Mecinus janthinus, available through Professor Gary Piper of Washington State University. This year we released 4,000 M. janthinus on the Bridgeport Unit at 6 separate locations. Since 2002 we have released approximately 14,400 of these insects, 80% of these on the Bridgeport Unit. Additional weed control activities included mowing and spot spraying more than 32 miles of roads, cutting and removal of annual weeds within fenced deer exclosures. We upgraded the solar powered irrigation system that supplies water to a stand of water birch trees planted in 2002. Wildlife area staff designed and built a new solar array and installed a higher capacity pump. The increased capacity will ensure that these trees receive adequate water through the hot summer months and allow us to create at least one additional stand. This project is an important part in our effort to expand the available winter habitat for sharp-tailed grouse on the Bridgeport Unit. Maintenance of fences, parking areas and roads continued during throughout the year. Two parking areas, at Chester Butte and Bridgeport, were graded and additional gravel added. Roads on the Bridgeport Unit were graded and repaired following spring runoff. Trespass and dumping issues have increased in recent years on the Bridgeport Unit. To address these problems we constructed four steel gates at access points on this unit. Each gate is tubular steel attached to 8-inch diameter steel posts, 10 feet long that are cemented into the ground. Two gates allow access to BPA substation facilities and power-line right-of ways so placement, construction and locking issues had to be coordinated with BPA's Real Estate staff in Spokane. Environmental Compliance Documentation issues were addressed again this year. This process has the potential to cause delays the completion of projects within the fiscal year. With this in mind and an eye toward the future, we requested that several projects planned for the coming years be surveyed this year. Beginning in August of 2007, area staff worked with BPA staff to identify work elements

  17. Design as a Set of Design Decisions Remco C. de Boer

    E-Print Network [OSTI]

    van Vliet, Hans

    Design as a Set of Design Decisions Remco C. de Boer ArchiXL The Netherlands Email: rdeboer is characterized by the major design decisions taken. These major design decisions tend to be quality-related. We studied the videos to identify those major design decisions. We found that each design team made one

  18. WHY MECHANICAL DESIGN CANNOT BE LIKE VLSI DESIGN Daniel E Whitney

    E-Print Network [OSTI]

    Whitney, Daniel

    4/4/96 1 WHY MECHANICAL DESIGN CANNOT BE LIKE VLSI DESIGN by Daniel E Whitney MIT ABSTRACT mechanical design from approaching the ideal of VLSI design methods. The argument is accompanied by examples and brief histories of the evolution of VLSI design methods and attempts to systematize mechanical design

  19. ECE 450/1: Digital System Design Knowledge of Design Methodology

    E-Print Network [OSTI]

    Connors, Daniel A.

    , control) - Design trade-offs (area, speed, power) - Design methodology and design flow for complex logicECE 450/1: Digital System Design Knowledge of Design Methodology and Design Flow - ECE102 Pre-requisites: - Understands complex logic minimization through QM and CAD methods Switching Theory Finite-State Machines Gates

  20. Waste Package Design Methodology Report

    SciTech Connect (OSTI)

    D.A. Brownson

    2001-09-28

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.

  1. Design Editorial Industrial Research Contributions

    E-Print Network [OSTI]

    Papalambros, Panos

    Journal of Mechanical Design Editorial Industrial Research Contributions Would authors working in industry be welcome contributors to JMD? The answer is an emphatic "yes, indeed!" but the reality is that authors from industry are a small minority relative to authors from academia. There are some real reasons

  2. WWU Sustainability Curriculum Design Charrette

    E-Print Network [OSTI]

    Zaferatos, Nicholas C.

    WWU Sustainability Curriculum Design Charrette Feburary 4, 2009 6-9 PM ­ (VU 462 AB) "What Does Sustainability Literacy look like at WWU"? Hosted by: WWU Sustainability Academy & WWU Sustainability Committee's Subcommittee on Curriculum Dear Colleagues: You are invited to join fellow WWU Sustainability Academy members

  3. MARKET DESIGN AND ELECTRICITY RESTRUCTURING

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    ) took the lead in Order 888 (1996) by opening access to the electric transmission grid. Market Design discrimination in access to the monopoly owned transmission wires that control whether and to whom electricity, aka available transmission capacity). · Defining reliability standards while certifying the Electric

  4. Designated Responsible Authority (DRA) Training

    E-Print Network [OSTI]

    Minnesota, University of

    · The role of Designated Responsible Authority (DRA) is defined in the Using Vehicles for University Business policy. · The head of each University department with permanently assigned vehicles must appoint. Be familiar with the policies and related documents governing the use of University vehicles, and direct

  5. Aspherical lens design and imaging

    E-Print Network [OSTI]

    Cristian E. Gutierrez; Ahmad Sabra

    2015-07-29

    We design freeform lenses refracting an arbitrarily given incident field into a given fixed direction. In the near field case, we study the existence of lenses refracting a given bright object into a predefined image. We also analyze the existence of systems of mirrors that solve the near field and the far field problems for reflection.

  6. Theoretical study of cyclone design 

    E-Print Network [OSTI]

    Wang, Lingjuan

    2005-08-29

    velocities, which are 16 m/s (3200 ft/min) for 1D3D cyclones and 15 m/s (3000 ft/min) for 2D2D cyclones, should be determined based on standard air density. It is important to consider the air density effect on cyclone performance in the design of cyclone...

  7. Scaling the Web in Designing

    E-Print Network [OSTI]

    Menascé, Daniel A.

    Scaling the Web Trade-offs in Designing Web Clusters 76 SEPTEMBER · OCTOBER 2002 http://computer.org/internet/ 1089-7801/02/$17.00 ©2002 IEEE IEEE INTERNET COMPUTING H igh-volume Web sites often use clusters approaches to scaling Web clusters: adding more servers of the same type (scaling out, or horizontally

  8. GROUNDWATER REMEDIATION DESIGN USING SIMULATED

    E-Print Network [OSTI]

    Mays, Larry W.

    CHAPTER 8 GROUNDWATER REMEDIATION DESIGN USING SIMULATED ANNEALING Richard L. Skaggs Pacific? There has been an emergence in the use of combinatorial methods such as simulated annealing in groundwater for groundwater management applications. The algorithm incor- porates "directional search" and "memory

  9. Protein design for pathway engineering

    SciTech Connect (OSTI)

    Eriksen, DT; Lian, JZ; Zhao, HM

    2014-02-01

    Design and construction of biochemical pathways has increased the complexity of biosynthetically-produced compounds when compared to single enzyme biocatalysis. However, the coordination of multiple enzymes can introduce a complicated set of obstacles to overcome in order to achieve a high titer and yield of the desired compound. Metabolic engineering has made great strides in developing tools to optimize the flux through a target pathway, but the inherent characteristics of a particular enzyme within the pathway can still limit the productivity. Thus, judicious protein design is critical for metabolic and pathway engineering. This review will describe various strategies and examples of applying protein design to pathway engineering to optimize the flux through the pathway. The proteins can be engineered for altered substrate specificity/selectivity, increased catalytic activity, reduced mass transfer limitations through specific protein localization, and reduced substrate/product inhibition. Protein engineering can also be expanded to design biosensors to enable high through-put screening and to customize cell signaling networks. These strategies have successfully engineered pathways for significantly increased productivity of the desired product or in the production of novel compounds. (C) 2013 Elsevier Inc. All rights reserved.

  10. Operational Amplifier Design Spring 2010

    E-Print Network [OSTI]

    Leach Jr.,W. Marshall

    ., by Sergio Franco, and notes posted to the class web page. Material Selected parts of Chapters 1 -- 6, 9-Hill, 1973. TK7871.58.06 576 -- D. Stout and M. Kaufman, Handbook of Operational Amplifier Circuit Design Amplifiers, New York: McGraw- Hill, 1973. TK7872.F5 I65 -- D. E. Johnson, et. al., A Handbook of Active

  11. Manufacturer's Mixed Pallet Design Problem

    E-Print Network [OSTI]

    fore, the company decided to design a number of mixed or “rainbow” pallets so that its. customers can ... the number of cases of each brand in the pallet depending on her consumption and future. needs. ..... over the planning period, i.e, ?t?T.

  12. ADVANCES IN YUCCA MOUNTAIN DESIGN

    SciTech Connect (OSTI)

    Harrington, P.G.; Gardiner, J.T.; Russell, P.R.Z.; Lachman, K.D.; McDaniel, P.W.; Boutin, R.J.; Brown, N.R.; Trautner, L.J.

    2003-02-27

    Since site designation of the Yucca Mountain Project by the President, the U.S. Department of Energy (DOE) has begun the transition from the site characterization phase of the project to preparation of the license application. As part of this transition, an increased focus has been applied to the repository design. Several evolution studies were performed to evaluate the repository design and to determine if improvements in the design were possible considering advances in the technology for handling and packaging nuclear materials. The studies' main focus was to reduce and/or eliminate uncertainties in both the pre-closure and post-closure performance of the repository and to optimize operations. The scope and recommendations from these studies are the subjects of this paper and include the following topics: (1) a more phased approach for the surface facility that utilize handling and packaging of the commercial spent nuclear fuel in a dry environment rather than in pools as was presented in the site recommendation; (2) slight adjustment of the repository footprint and a phased approach for construction and emplacement of the repository subsurface; and (3) simplification of the construction, fabrication and installation of the waste package and drip shield.

  13. Energy-efficient memory design

    E-Print Network [OSTI]

    Bogliolo, Alessandro

    Informatica 2 Outline l Introduction to low-power design l System-level power optimization l Architectural! Abstraction Level Low-Power Optimization Power Reduction System Selective shutdown, Vdd scaling, HW/SW-Level Power Optimization l At the HW level (after HW/SW partitioning): ­ Power management u Shutdown of unused

  14. Design of bioaerosol sampling inlets 

    E-Print Network [OSTI]

    Nene, Rohit Ravindra

    2007-09-17

    An experimental investigation involving the design, fabrication, and testing of an ambient sampling inlet and two additional Stokes-scaled inlets is presented here. Testing of each inlet was conducted at wind speeds of 2, 8, and 24 km/h (0.55, 2...

  15. Structural Design Challenges in Design Certification Applications for New Reactors

    SciTech Connect (OSTI)

    Miranda, M.; Braverman, J.; Wei, X.; Hofmayer, C.; Xu, J.

    2011-07-17

    The licensing framework established by the U.S. Nuclear Regulatory Commission under Title 10 of the Code of Federal Regulations (10 CFR) Part 52, “Licenses, Certifications, and Approvals for Nuclear Power Plants,” provides requirements for standard design certifications (DCs) and combined license (COL) applications. The intent of this process is the early reso- lution of safety issues at the DC application stage. Subsequent COL applications may incorporate a DC by reference. Thus, the COL review will not reconsider safety issues resolved during the DC process. However, a COL application that incorporates a DC by reference must demonstrate that relevant site-specific de- sign parameters are confined within the bounds postulated by the DC, and any departures from the DC need to be justified. This paper provides an overview of structural design chal- lenges encountered in recent DC applications under the 10 CFR Part 52 process, in which the authors have participated as part of the safety review effort.

  16. TPX: Contractor preliminary design review. Volume 3, Design and analysis

    SciTech Connect (OSTI)

    NONE

    1995-06-30

    Several models have been formed for investigating the maximum electromagnetic loading and magnetic field levels associated with the Tokamak Physics eXperiment (TPX) superconducting Poloidal Field (PF) coils. The analyses have been performed to support the design of the individual fourteen hoop coils forming the PF system. The coils have been sub-divided into three coil systems consisting of the central solenoid (CS), PF5 coils, and the larger radius PF6 and PF7 coils. Various electromagnetic analyses have been performed to determine the electromagnetic loadings that the coils will experience during normal operating conditions, plasma disruptions, and fault conditions. The loadings are presented as net body forces acting individual coils, spatial variations throughout the coil cross section, and force variations along the path of the conductor due to interactions with the TF coils. Three refined electromagnetic models of the PF coil system that include a turn-by-turn description of the fields and forces during a worst case event are presented in this report. A global model including both the TF and PF system was formed to obtain the force variations along the path of the PF conductors resulting from interactions with the TF currents. In addition to spatial variations, the loadings are further subdivided into time-varying and steady components so that structural fatigue issues can be addressed by designers and analysts. Other electromagnetic design issues such as the impact of the detailed coil designs on field errors are addressed in this report. Coil features that are analyzed include radial transitions via short jogs vs. spiral type windings and the effects of layer-to-layer rotations (i.e clocking) on the field errors.

  17. ALS beamline design requirements: A guide for beamline designers

    SciTech Connect (OSTI)

    1996-06-01

    This manual is written as a guide for researchers in designing beamlines and endstations acceptable for use at the ALS. It contains guidelines and policies related to personnel safety and equipment and vacuum protection. All equipment and procedures must ultimately satisfy the safety requirements set aside in the Lawrence Berkeley National Laboratory (LBNL) Health and Safety Manual (PUB-3000) which is available from the ALS User Office or on the World WideWeb from the LBNL Homepage (http:// www.lbl.gov).

  18. Integrated Design: Because Nothing Lasts Longer Than Bad Design 

    E-Print Network [OSTI]

    Westbrook, P.

    2014-01-01

    Nothing Lasts Longer Than Bad Design Paul Westbrook Sustainable Development Manager, LEED AP Texas Instruments Facilities Senior Fellow, US State Department Energy & Climate Partnership for the Americas (ECPA) ESL-KT-14-11-25 CATEE 2014: Clean Air Through... ideas – Made a first pass at LEED score sheet ESL-KT-14-11-25 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Case Two: Project Management • Sustainable Development Manager role assigned – Chief integrator of ideas...

  19. AIAA 20031068 Aerodynamic Design of Cascades by

    E-Print Network [OSTI]

    Liu, Feng

    is developed for the aerodynamic design of cascade blades in a two-dimensional, inviscid, and compressible flow cascade blade design cases are tested. The results show that the method is effective and efficient for turbomachinery blade design. The effect of shape functions on the performance of the design method is discussed

  20. Design, Analogy, and Creativity Ashok K. Goel

    E-Print Network [OSTI]

    Goel, Ashok

    Design, Analogy, and Creativity Ashok K. Goel College of Computing Georgia Institute of Technology a key role in creative design. This article provides a brief overview of recent AI research on analogy­based creative design. It begins with an examination of characterizations of creative design. Then it analyzes

  1. Design techniques for forest management planning

    E-Print Network [OSTI]

    Design techniques for forest management planning Practice Guide #12;#12;Practice Guide Design by the Forestry Commission in 1998 as `Forest design planning: a guide to good practice'. This revised second edition published in 2014. ISBN: 978-0-85538-894-2 Forestry Commission (2014). Design techniques

  2. RTL Hardware Design Chapter 3 1

    E-Print Network [OSTI]

    Chu, Pong P.

    . Chu Chapter 3 15 2. Lexical elements and program format RTL Hardware Design by P. Chu Chapter 3 16 elements: ­ Comments ­ Identifiers ­ Reserved words ­ Numbers ­ Characters ­ Strings RTL Hardware Design1 RTL Hardware Design by P. Chu Chapter 3 1 Basic Language Constructs of VHDL RTL Hardware Design

  3. Structural Design Criteria Irving J. Zatz, PPPL

    E-Print Network [OSTI]

    1 FIRE Structural Design Criteria Irving J. Zatz, PPPL Engineering Peer Review June 5-7, 2001 #12;2 Purpose of FIRE Design Criteria · Criteria to be utilized when conventional industrial design codes and standards do not apply ­ Operating conditions ­ Materials #12;3 The FIRE Design Criteria has evolved from

  4. Market User Interface Design [Extended Abstract

    E-Print Network [OSTI]

    Chen, Yiling

    Market User Interface Design [Extended Abstract] Sven Seuken1 , David C. Parkes1 , Eric Horvitz2, {horvitz,kamalj,marycz,desney}@microsoft.com 1 Introduction: Market Design & UI Design Electronic markets associated with decision making in complex environments [1], but until now, the market design community has

  5. Applications of Automated Mechanism Design Vincent Conitzer

    E-Print Network [OSTI]

    Applications of Automated Mechanism Design Vincent Conitzer Computer Science Department Carnegie University Pittsburgh, PA 15213 Abstract Mechanism design is the art of designing the rules of the game so mechanism design (AMD) [5]. In that paper and in other work, we studied its worst-case com- plexity [5, 6, 7

  6. Partial Revelation Automated Mechanism Design Nathanael Hyafil

    E-Print Network [OSTI]

    Boutilier, Craig

    Partial Revelation Automated Mechanism Design Nathana¨el Hyafil Department of Computer Science mechanism design settings, optimal general-purpose mechanisms are not known. Thus the automated design techniques for au- tomated mechanism design (AMD) require the revelation of full utility information from

  7. Battery Thermal Management System Design Modeling (Presentation)

    SciTech Connect (OSTI)

    Kim, G-H.; Pesaran, A.

    2006-10-01

    Presents the objectives and motivations for a battery thermal management vehicle system design study.

  8. Elec Eng 4OI6 Engineering Design

    E-Print Network [OSTI]

    Haykin, Simon

    their work in detail so as to allow another engineering graduate to follow up on the work. In additionElec Eng 4OI6 Engineering Design Course Outline: 2014/2015 Instructors: Dr. Xun Li, lixun introduces the students to basic design methodology, computer aided design (CAD) tools used in the design

  9. National Ignition Facility Title II Design Plan

    SciTech Connect (OSTI)

    Kumpan, S

    1997-03-01

    This National Ignition Facility (NIF) Title II Design Plan defines the work to be performed by the NIF Project Team between November 1996, when the U.S. Department of Energy (DOE) reviewed Title I design and authorized the initiation of Title H design and specific long-lead procurements, and September 1998, when Title 11 design will be completed.

  10. VANDERBILTSENIOR DESIGN PROJECTS SCHOOL OF ENGINEERING

    E-Print Network [OSTI]

    ..............................................................................................9 Biogas to Electricity Conversion.................................................10 Design of Scalable Biogas Digester for the Developing World

  11. RTL Hardware Design Chapter 12 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 12 1 Register Transfer Methodology II #12;RTL Hardware Design #12;RTL Hardware Design by P. Chu Chapter 12 3 1. One­shot pulse generator · Sequential circuit in different types · FSMD is most flexible · One­shot pulse generator as an example #12;RTL Hardware Design

  12. RTL Hardware Design Chapter 16 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 16 1 Clock and Synchronization #12;RTL Hardware Design by P-clock system 4. Meta-stability and synchronization failure 5. Synchronizer #12;RTL Hardware Design by P. Chu Chapter 16 3 1. Why synchronous #12;RTL Hardware Design by P. Chu Chapter 16 4 Timing of a combinational

  13. RTL Hardware Design Chapter 5 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 5 1 Sequential Statements #12;RTL Hardware Design by P. Chu statement 4. If statement 5. Case statement 6. Simple for loop statement #12;RTL Hardware Design by P. Chu of a black box · May or may not be able to be mapped to physical hardware #12;RTL Hardware Design by P. Chu

  14. RTL Hardware Design Chapter 16 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 16 1 Clock and Synchronization RTL Hardware Design by P-clock system 4. Meta-stability and synchronization failure 5. Synchronizer RTL Hardware Design by P. Chu Chapter 16 3 1. Why synchronous RTL Hardware Design by P. Chu Chapter 16 4 Timing of a combinational

  15. RTL Hardware Design Chapter 12 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 12 1 Register Transfer Methodology II RTL Hardware Design RTL Hardware Design by P. Chu Chapter 12 3 1. One­shot pulse generator · Sequential circuit divided is most flexible · One­shot pulse generator as an example RTL Hardware Design by P. Chu Chapter 12 4

  16. RTL Hardware Design Chapter 5 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 5 1 Sequential Statements RTL Hardware Design by P. Chu statement 4. If statement 5. Case statement 6. Simple for loop statement RTL Hardware Design by P. Chu of a black box · May or may not be able to be mapped to physical hardware RTL Hardware Design by P. Chu

  17. Red Rice Research and Control. 

    E-Print Network [OSTI]

    Baker, John B.; Baldwin, Ford L.; Bourgeois, W.J.; Cox, Clodis H.; Craigmiles, Julian P.; Dishman, William D.; Eastin, E. Ford; Helpert, Charles W.; Hill, Lewis C.; Huey, Bobby A.; Klosterboer, Arlen D.; Sonnier, Earl A.

    1980-01-01

    ...................................... 10 E. A. Sonnier RED RICE CONTROL IN ALTERNATE CROPS ................................ 16 F. L. Baldwin ..# RED RICE CONTROL ..................................................lg B. A. Huey and F. L. Baldwin RED RICE HERBICIDE SCREENING TESTS... - t o discuss the l a t e s t f indings and procedures f o r con t ro l l ing red r i c e . In accom- pl ishing t h i s we want two-way communication s o t h a t all present w i l l become current on t h i s most noxious weed of r i c e...

  18. EA-2008: Colorado River Storage Project Programmatic Operations and Maintenance Project; Coconino, Maricopa, Navajo, and Yavapai Counties (Arizona) and San Juan County (Utah)

    Broader source: Energy.gov [DOE]

    Western Area Power Administration is preparing an EA that assesses the potential environmental impacts of Western’s programmatic operations and management (O&M) process and an integrated vegetation management (IVM) program on the Colorado River Storage Project System. O&M activities would consist of aerial and ground patrols, regular and preventive maintenance, inspections and repairs, and road repair. The IVM program would remove vegetation to protect facilities from fire, control the spread of noxious weeds to protect environmental quality, establish and maintain stable, low-growing plant communities in the ROW, and activities for public and worker safety around transmission lines and other facilities.

  19. DOE/EA-2008: Colorado River Storage Project Programmatic Operations and Maintenance Project; Coconino, Maricopa, Navajo, and Yavapai Counties (Arizona) and San Juan County (Utah)

    Broader source: Energy.gov [DOE]

    Western Area Power Administration is preparing an EA that assesses the potential environmental impacts of Western’s programmatic operations and management (O&M) process and an integrated vegetation management (IVM) program on the Colorado River Storage Project System. O&M activities would consist of aerial and ground patrols, regular and preventive maintenance, inspections and repairs, and road repair. The IVM program would remove vegetation to protect facilities from fire, control the spread of noxious weeds to protect environmental quality, establish and maintain stable, low-growing plant communities in the ROW, and activities for public and worker safety around transmission lines and other facilities.

  20. Alfalfa. 

    E-Print Network [OSTI]

    Ball, O. M. (Oscar Melville)

    1908-01-01

    . Noxious weeds are given i heavy t;ype. UUYLpA,, number. Kind, character, and number of for- eign seeds in one pound. BUCKHORN, or Ribgrass 2350; GREEN FOXTAIL 270; LAMB'S QUARTER 270; Red clover 90; DOCK 180: WILD. CARROT 275: DODDER 180: Crimson... Clover 90; Total 3700. BUCKHORN 2100; GREEN FOX- TAIL 275 : YELLOW FOXTAIL 100 ; MALLOW 350; WILD CARROT 275; CHICORY 275; SOW THISTLE 200; CATCHFLY ZOO; Rape 100; Cab- bage 100; SORREL 200; DODDER 90; CENTAURY 200; LAMB'S QUARTER 275; Total 4740...

  1. Designs of SSRF Insertion Devices

    SciTech Connect (OSTI)

    Zhou, Q. G.; Chen, N.; Zhang, M.; Li, Y.; Su, W. L.

    2007-01-19

    Five IDs will be built for the Shanghai Synchrotron Radiation Facility (SSRF). Two identical mini-gap undulators with the period length 25mm and the minimum gap 6mm will use the in-vacuum technology and can operate in tapered mode. Two wigglers with the period lengths 7.9cm and 14cm and the same minimum gap 14mm will produce the peak fields of 1.2T and 1.94T. A variable polarization undulator of the APPLE-II type with 4.2m long and the period length 10cm can provide linearly, circularly and elliptically polarized radiation in a wide spectral range. This paper describes the magnet designs and the mechanical structure designs of these IDs.

  2. The Lifetime of Grand Design

    E-Print Network [OSTI]

    M. R. Merrifield; R. J. Rand; S. E. Meidt

    2005-11-02

    The lifetime of the structure in grand design spiral galaxies is observationally ill-determined, but is essentially set by how accurately the pattern's rotation can be characterized by a single angular pattern speed. This paper derives a generalized version of the Tremaine-Weinberg method for observationally determining pattern speeds, in which the pattern speed is allowed to vary arbitrarily with radius. The departures of the derived pattern speed from a constant then provides a simple metric of the lifetime of the spiral structure. Application of this method to CO observations of NGC 1068 reveal that the pattern speed of the spiral structure in this galaxy varies rapidly with radius, and that the lifetime of the spiral structure is correspondingly very short. If this result turns out to be common in grand-design spiral galaxies, then these features will have to be viewed as highly transient phenomena.

  3. Visiting Classrooms: A Design Study to Support Principals' Instructional Leadership

    E-Print Network [OSTI]

    Wayne, Matthew Robert

    2011-01-01

    Design Elements..40! Design Elements: A Focus on TeacherObservation Findings – Design Elements – Pre and Post A(*.Q!

  4. Nuclear Reactor Safety Design Criteria

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-01-19

    The order establishes nuclear safety criteria applicable to the design, fabrication, construction, testing, and performance requirements of nuclear reactor facilities and safety class structures, systems, and components (SSCs) within these facilities. Cancels paragraphs 8a and 8b of DOE 5480.6. Cancels DOE O 5480.6 in part. Supersedes DOE 5480.1, dated 1-19-93. Certified 11-18-10.

  5. Security-by-design handbook.

    SciTech Connect (OSTI)

    Snell, Mark Kamerer; Jaeger, Calvin Dell; Scharmer, Carol; Jordan, Sabina Erteza; Tanuma, Koji; Ochiai, Kazuya; Iida, Toru

    2013-01-01

    This document is a draft SecuritybyDesign (SeBD) handbook produced to support the Work Plan of the Nuclear Security Summit to share best practices for nuclear security in new facility design. The Work Plan calls on States to %E2%80%9Cencourage nuclear operators and architect/engineering firms to take into account and incorporate, where appropriate, effective measures of physical protection and security culture into the planning, construction, and operation of civilian nuclear facilities and provide technical assistance, upon request, to other States in doing so.%E2%80%9D The materials for this document were generated primarily as part of a bilateral project to produce a SeBD handbook as a collaboration between the Japan Atomic Energy Agency (JAEA) Nuclear Nonproliferation Science and Technology Center and Sandia National Laboratories (SNL), which represented the US Department Energy (DOE) National Nuclear Security Administration (NNSA) under a Project Action Sheet PASPP04. Input was also derived based on tours of the Savannah River Site (SRS) and Japan Nuclear Fuel Limited (JNFL) Rokkasho Mixed Oxide Fuel fabrication facilities and associated project lessonslearned. For the purposes of the handbook, SeBD will be described as the systemlevel incorporation of the physical protection system (PPS) into a new nuclear power plant or nuclear facility resulting in a PPS design that minimizes the risk of malicious acts leading to nuclear material theft; nuclear material sabotage; and facility sabotage as much as possible through features inherent in (or intrinsic to) the design of the facility. A fourelement strategy is presented to achieve a robust, durable, and responsive security system.

  6. Design Competitions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeCommunication &20081-929-200499Actof2014 Budget Request PROGRAM DESIGN CASE

  7. Mechanism Design with Risk Aversion

    E-Print Network [OSTI]

    Bhalgat, Anand; Khanna, Sanjeev

    2011-01-01

    We design efficient algorithms to compute truthful mechanisms for risk-averse sellers, in Bayesian single-parameter and multi-parameter settings. We model risk aversion by a concave utility function, where the the seller maximizes its expected utility. Much earlier work on Bayesian mechanism design has focused on maximizing expected revenue, and no succinct characterization of expected utility maximizing mechanism is known even for multi-unit auctions. We design a poly-time algorithm for multi-unit auctions, to compute a sequential posted pricing mechanism (SPM) that for any $\\eps > 0$, yields a $(1-1/e-\\eps)$-approximation to the expected utility of an optimal mechanism. In comparison, the best known approximation factor using SPM is $(1-1/e)$ even for the expected revenue objective (linear utility). Our result uses a correlation gap bound and then applies concentration bounds to show the existence of an order-independent SPM for large inventory, and an approximation scheme for optimal adaptive SPM for small...

  8. Application of Target Value Design to Energy Efficiency Investments

    E-Print Network [OSTI]

    Lee, Hyun Woo

    2012-01-01

    the Conceptualization, Criteria Design, and Detailed Designand Expected Benefits Criteria Design to Targets Set-baseddesign based on the design criteria, and proceeds to design

  9. DESIGN OF 15 mm COLLARS FOR SSC DIPOLE MAGNETS

    E-Print Network [OSTI]

    Peters, C.

    2010-01-01

    layer. The Preliminary Design Criteria It will be helpful atand preliminary design criteria. Finite element analysisto meet the suggested design criteria. Three designs are

  10. Residential Retrofit Program Design Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Retrofit Program Design Guide Residential Retrofit Program Design Guide Residential Retrofit Program Design Guide. Residential Retrofit Program Design Guide More...

  11. River Renaissance and Waterfront Awareness [Forum: AIA Committee on Design

    E-Print Network [OSTI]

    Ross, Michael

    2007-01-01

    of Architects Committee on Design On the Waterfront Riveragreement between Places/Design History Foundation and theon the AIA Committee on Design’s (COD) 2007 conferences in

  12. Residential Retrofit Program Design Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Retrofit Program Design Guide Residential Retrofit Program Design Guide This Residential Retrofit Program Design Guide focuses on the key elements and design...

  13. Design Evolution Study - Aging Options

    SciTech Connect (OSTI)

    P. McDaniel

    2002-04-05

    The purpose of this study is to identify options and issues for aging commercial spent nuclear fuel received for disposal at the Yucca Mountain Mined Geologic Repository. Some early shipments of commercial spent nuclear fuel to the repository may be received with high-heat-output (younger) fuel assemblies that will need to be managed to meet thermal goals for emplacement. The capability to age as much as 40,000 metric tons of heavy metal of commercial spent nuclear he1 would provide more flexibility in the design to manage this younger fuel and to decouple waste receipt and waste emplacement. The following potential aging location options are evaluated: (1) Surface aging at four locations near the North Portal; (2) Subsurface aging in the permanent emplacement drifts; and (3) Subsurface aging in a new subsurface area. The following aging container options are evaluated: (1) Complete Waste Package; (2) Stainless Steel inner liner of the waste package; (3) Dual Purpose Canisters; (4) Multi-Purpose Canisters; and (5) New disposable canister for uncanistered commercial spent nuclear fuel. Each option is compared to a ''Base Case,'' which is the expected normal waste packaging process without aging. A Value Engineering approach is used to score each option against nine technical criteria and rank the options. Open issues with each of the options and suggested future actions are also presented. Costs for aging containers and aging locations are evaluated separately. Capital costs are developed for direct costs and distributable field costs. To the extent practical, unit costs are presented. Indirect costs, operating costs, and total system life cycle costs will be evaluated outside of this study. Three recommendations for aging commercial spent nuclear fuel--subsurface, surface, and combined surface and subsurface are presented for further review in the overall design re-evaluation effort. Options that were evaluated but not recommended are: subsurface aging in a new subsurface area (high cost); surface aging in the complete waste package (risk to the waste package and impact on the Waste Handling Facility); and aging in the stainless steel liner (impact on the waste package design and new high risk operations added to the waste packaging process). The selection of a design basis for aging will be made in conjunction with the other design re-evaluation studies.

  14. Photonic Design: From Fundamental Solar Cell Physics to Computational Inverse Design

    E-Print Network [OSTI]

    Kastner, Marc A.

    Photonic Design: From Fundamental Solar Cell Physics to Computational Inverse Design by Owen Dennis #12;Photonic Design: From Fundamental Solar Cell Physics to Computational Inverse Design Copyright 2012 by Owen Dennis Miller #12;1 Abstract Photonic Design: From Fundamental Solar Cell Physics

  15. CIV498 Design Project 2016 Project Title: Design of Reinforced Concrete Bridges

    E-Print Network [OSTI]

    Toronto, University of

    with respect to structural and durability design criteria. This design problem involves structural and disadvantages of each type. 3. Design Criteria: This exercise should provide basic understanding of reinforcedCIV498 Design Project 2016 Project Title: Design of Reinforced Concrete Bridges INSTRUCTORS

  16. AEROSOL PARTICLE COLLECTOR DESIGN STUDY

    SciTech Connect (OSTI)

    Lee, S; Richard Dimenna, R

    2007-09-27

    A computational evaluation of a particle collector design was performed to evaluate the behavior of aerosol particles in a fast flowing gas stream. The objective of the work was to improve the collection efficiency of the device while maintaining a minimum specified air throughput, nominal collector size, and minimal power requirements. The impact of a range of parameters was considered subject to constraints on gas flow rate, overall collector dimensions, and power limitations. Potential improvements were identified, some of which have already been implemented. Other more complex changes were identified and are described here for further consideration. In addition, fruitful areas for further study are proposed.

  17. Molecular Design of Crosslinked Copolymers

    E-Print Network [OSTI]

    Eslick, John

    2009-01-01

    is also shown to be an e ective optimization method. iii Acknowledgements This project was funded by NIH grants R13-DK069504-03 and NIH/NIDCR grant DE014392 (PI: Spencer). I would like to thank Dr. Spencer, Dr. Ye, and Dr. Park for helping me understand... polymer network makes devel- opment of quantitative structure property relations (QSPRs) di cult. Much of the current molecular design research focuses on relatively simple molecules, for which de- terministic optimization algorithms can be applied...

  18. Design of a Cyclic Multiverse

    E-Print Network [OSTI]

    Yun-Song Piao

    2010-07-02

    Recently, it has been noticed that the amplification of the amplitude of curvature perturbation cycle by cycle can lead to a cyclic multiverse scenario, in which the number of universes increases cycle by cycle. However, this amplification will also inevitably induce either the ultimate end of corresponding cycle, or the resulting spectrum of perturbations inside corresponding universe is not scale invariant, which baffles the existence of observable universes. In this paper, we propose a design of a cyclic multiverse, in which the observable universe can emerges naturally. The significance of a long period of dark energy before the turnaround of each cycle for this implementing is shown.

  19. Designing an ultrasupercritical steam turbine

    SciTech Connect (OSTI)

    Klotz, H.; Davis, K.; Pickering, E.

    2009-07-15

    Carbon emissions produced by the combustion of coal may be collected and stored in the future, but a better approach is to reduce the carbon produced through efficient combustion technologies. Increasing the efficiency of new plants using ultrasupercritical (USC) technology will net less carbon released per megawatt-hour using the world's abundant coal reserves while producing electricity at the lowest possible cost. The article shows how increasing the steam turbine operating conditions for a new USC project in the USA and quantify the potential CO{sub 2} reduction this advanced design makes possible. 7 figs., 3 tabs.

  20. Sustainable Performance...by Design 

    E-Print Network [OSTI]

    Bailey, N.

    2010-01-01

    that provides the features mentioned in this presentation. ? Understand that the costs are far out-weighed by the sustained savings. Don?t fall into the VE trap. ? Write a performance spec that requires the M&V features. ? Understand the impact of design... stream_source_info ESL-HH-10-08-01.pdf.txt stream_content_type text/plain stream_size 2687 Content-Encoding ISO-8859-1 stream_name ESL-HH-10-08-01.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Sustainable...

  1. Belle II Technical Design Report

    E-Print Network [OSTI]

    T. Abe; I. Adachi; K. Adamczyk; S. Ahn; H. Aihara; K. Akai; M. Aloi; L. Andricek; K. Aoki; Y. Arai; A. Arefiev; K. Arinstein; Y. Arita; D. M. Asner; V. Aulchenko; T. Aushev; T. Aziz; A. M. Bakich; V. Balagura; Y. Ban; E. Barberio; T. Barvich; K. Belous; T. Bergauer; V. Bhardwaj; B. Bhuyan; S. Blyth; A. Bondar; G. Bonvicini; A. Bozek; M. Bracko; J. Brodzicka; O. Brovchenko; T. E. Browder; G. Cao; M. -C. Chang; P. Chang; Y. Chao; V. Chekelian; A. Chen; K. -F. Chen; P. Chen; B. G. Cheon; C. -C. Chiang; R. Chistov; K. Cho; S. -K. Choi; K. Chung; A. Comerma; M. Cooney; D. E. Cowley; T. Critchlow; J. Dalseno; M. Danilov; A. Dieguez; A. Dierlamm; M. Dillon; J. Dingfelder; R. Dolenec; Z. Dolezal; Z. Drasal; A. Drutskoy; W. Dungel; D. Dutta; S. Eidelman; A. Enomoto; D. Epifanov; S. Esen; J. E. Fast; M. Feindt; M. Fernandez Garcia; T. Fifield; P. Fischer; J. Flanagan; S. Fourletov; J. Fourletova; L. Freixas; A. Frey; M. Friedl; R. Fruehwirth; H. Fujii; M. Fujikawa; Y. Fukuma; Y. Funakoshi; K. Furukawa; J. Fuster; N. Gabyshev; A. Gaspar de Valenzuela Cueto; A. Garmash; L. Garrido; Ch. Geisler; I. Gfall; Y. M. Goh; B. Golob; I. Gorton; R. Grzymkowski; H. Guo; H. Ha; J. Haba; K. Hara; T. Hara; T. Haruyama; K. Hayasaka; K. Hayashi; H. Hayashii; M. Heck; S. Heindl; C. Heller; T. Hemperek; T. Higuchi; Y. Horii; W. -S. Hou; Y. B. Hsiung; C. -H. Huang; S. Hwang; H. J. Hyun; Y. Igarashi; C. Iglesias; Y. Iida; T. Iijima; M. Imamura; K. Inami; C. Irmler; M. Ishizuka; K. Itagaki; R. Itoh; M. Iwabuchi; G. Iwai; M. Iwai; M. Iwasaki; M. Iwasaki; Y. Iwasaki; T. Iwashita; S. Iwata; H. Jang; X. Ji; T. Jinno; M. Jones; T. Julius; T. Kageyama; D. H. Kah; H. Kakuno; T. Kamitani; K. Kanazawa; P. Kapusta; S. U. Kataoka; N. Katayama; M. Kawai; Y. Kawai; T. Kawasaki; J. Kennedy; H. Kichimi; M. Kikuchi; C. Kiesling; B. K. Kim; G. N. Kim; H. J. Kim; H. O. Kim; J. -B. Kim; J. H. Kim; M. J. Kim; S. K. Kim; K. T. Kim; T. Y. Kim; K. Kinoshita; K. Kishi; B. Kisielewski; K. Kleese van Dam; J. Knopf; B. R. Ko; M. Koch; P. Kodys; C. Koffmane; Y. Koga; T. Kohriki; S. Koike; H. Koiso; Y. Kondo; S. Korpar; R. T. Kouzes; Ch. Kreidl; M. Kreps; P. Krizan; P. Krokovny; H. Krueger; A. Kruth; W. Kuhn; T. Kuhr; R. Kumar; T. Kumita; S. Kupper; A. Kuzmin; P. Kvasnicka; Y. -J. Kwon; C. Lacasta; J. S. Lange; I. -S. Lee; M. J. Lee; M. W. Lee; S. -H. Lee; M. Lemarenko; J. Li; W. D. Li; Y. Li; J. Libby; A. Limosani; C. Liu; H. Liu; Y. Liu; Z. Liu; D. Liventsev; A. Lopez Virto; Y. Makida; Z. P. Mao; C. Marinas; M. Masuzawa; D. Matvienko; W. Mitaroff; K. Miyabayashi; H. Miyata; Y. Miyazaki; T. Miyoshi; R. Mizuk; G. B. Mohanty; D. Mohapatra; A. Moll; T. Mori; A. Morita; Y. Morita; H. -G. Moser; D. Moya Martin; T. Mueller; D. Muenchow; J. Murakami; S. S. Myung; T. Nagamine; I. Nakamura; T. T. Nakamura; E. Nakano; H. Nakano; M. Nakao; H. Nakazawa; S. -H. Nam; Z. Natkaniec; E. Nedelkovska; K. Negishi; S. Neubauer; C. Ng; J. Ninkovic; S. Nishida; K. Nishimura; E. Novikov; T. Nozaki; S. Ogawa; K. Ohmi; Y. Ohnishi; T. Ohshima; N. Ohuchi; K. Oide; S. L. Olsen; M. Ono; Y. Ono; Y. Onuki; W. Ostrowicz; H. Ozaki; P. Pakhlov; G. Pakhlova; H. Palka; H. Park; H. K. Park; L. S. Peak; T. Peng; I. Peric; M. Pernicka; R. Pestotnik; M. Petric; L. E. Piilonen; A. Poluektov; M. Prim; K. Prothmann; K. Regimbal; B. Reisert; R. H. Richter; J. Riera-Babures; A. Ritter; A. Ritter; M. Ritter; M. Roehrken; J. Rorie; M. Rosen; M. Rozanska; L. Ruckman; S. Rummel; V. Rusinov; R. M. Russell; S. Ryu; H. Sahoo; K. Sakai; Y. Sakai; L. Santelj; T. Sasaki; N. Sato; Y. Sato; J. Scheirich; J. Schieck; C. Schwanda; A. J. Schwartz; B. Schwenker; A. Seljak; K. Senyo; O. -S. Seon; M. E. Sevior; M. Shapkin; V. Shebalin; C. P. Shen; H. Shibuya; S. Shiizuka; J. -G. Shiu; B. Shwartz; F. Simon; H. J. Simonis; J. B. Singh; R. Sinha; M. Sitarz; P. Smerkol; A. Sokolov; E. Solovieva; S. Stanic; M. Staric; J. Stypula; Y. Suetsugu; S. Sugihara; T. Sugimura; K. Sumisawa; T. Sumiyoshi; K. Suzuki; S. Y. Suzuki; H. Takagaki; F. Takasaki; H. Takeichi; Y. Takubo; M. Tanaka; S. Tanaka; N. Taniguchi; E. Tarkovsky; G. Tatishvili; M. Tawada; G. N. Taylor; Y. Teramoto; I. Tikhomirov; K. Trabelsi; T. Tsuboyama; K. Tsunada; Y. -C. Tu; T. Uchida; S. Uehara; K. Ueno; T. Uglov; Y. Unno; S. Uno; P. Urquijo; Y. Ushiroda; Y. Usov; S. Vahsen; M. Valentan; P. Vanhoefer; G. Varner; K. E. Varvell; P. Vazquez; I. Vila; E. Vilella; A. Vinokurova; J. Visniakov; M. Vos; C. H. Wang; J. Wang; M. -Z. Wang; P. Wang; A. Wassatch; M. Watanabe; Y. Watase; T. Weiler; N. Wermes; R. E. Wescott; E. White; J. Wicht; L. Widhalm; K. M. Williams; E. Won; H. Xu; B. D. Yabsley; H. Yamamoto; H. Yamaoka; Y. Yamaoka; M. Yamauchi; Y. Yin; H. Yoon; J. Yu; C. Z. Yuan; Y. Yusa; D. Zander; M. Zdybal; Z. P. Zhang; J. Zhao; L. Zhao; Z. Zhao; V. Zhilich; P. Zhou; V. Zhulanov; T. Zivko; A. Zupanc; O. Zyukova

    2010-11-01

    The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.

  2. Sandia Energy - Rotor Design Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II)Geothermal EnergyRenewable Energy IntegrationRisk andDesign Tools Home

  3. Design-Only Conceptual Design Report: Plutonium Immobilization Plant

    SciTech Connect (OSTI)

    DiSabatino, A.; Loftus, D.

    1999-01-01

    This design-only conceptual design report was prepared to support a funding request by the Department of Energy Office of Fissile Materials Disposition for engineering and design of the Plutonium Immobilization Plant, which will be used to immobilize up to 50 tonnes of surplus plutonium. The siting for the Plutonium Immobilization Plant will be determined pursuant to the site-specific Surplus Plutonium Disposition Environmental Impact Statement in a Plutonium Deposition Record of Decision in early 1999. This document reflects a new facility using the preferred technology (ceramic immobilization using the can-in-canister approach) and the preferred site (at Savannah River). The Plutonium Immobilization Plant accepts plutonium from pit conversion and from non-pit sources and, through a ceramic immobilization process, converts the plutonium into mineral-like forms that are subsequently encapsulated within a large canister of high-level waste glass. The final immobilized product must make the plutonium as inherently unattractive and inaccessible for use in nuclear weapons as the plutonium in spent fuel from commercial reactors and must be suitable for geologic disposal. Plutonium immobilization at the Savannah River Site uses: (1) A new building, the Plutonium Immobilization Plant, which will convert non-pit surplus plutonium to an oxide form suitable for the immobilization process, immobilize plutonium in a titanate-based ceramic form, place cans of the plutonium-ceramic forms into magazines, and load the magazines into a canister; (2) The existing Defense Waste Processing Facility for the pouring of high-level waste glass into the canisters; and (3) The Actinide Packaging and Storage Facility to receive and store feed materials. The Plutonium Immobilization Plant uses existing Savannah River Site infra-structure for analytical laboratory services, waste handling, fire protection, training, and other support utilities and services. The Plutonium Immobilization Plant may share the disposition of the 50 tonnes of plutonium with the mixed oxide fuel/reactor disposition alternative. For this case, immobilization will process 18.2 tonnes of plutonium in 10 years.

  4. Conceptual Design Phase of Project on Design and Development of Airships for Transportation of Goods

    E-Print Network [OSTI]

    Ramu, Palaniappan

    Conceptual Design Phase of Project on Design and Development of Airships for Transportation Team 2 Literature Review 3 Requirements Capture 4 Discussions with Airship Manufacturers 5 Identification of Vendors and Resource Agencies 6 Regulations related to airship design, manufacture

  5. Disruptive by design : the promise of the tech-enabled design competition

    E-Print Network [OSTI]

    Lorah, Katherine P. (Katherine Peterson)

    2013-01-01

    At their best, urban design competitions offer access to innovative design thinking for competition sponsors; high quality spaces for the benefit of the public; and career advancement for designers. However, many feel that ...

  6. Material and Product Design Integration: Establishing Relationships between Design Variables of Both Domains

    E-Print Network [OSTI]

    Lu, Wen Feng

    Due to the increasing demand of application-specific and/or multi-functional materials, it is necessary to integrate material design and product design. To support such design integration, this paper proposes a methodology ...

  7. DISPLACEMENT BASED SEISMIC DESIGN METHODS.

    SciTech Connect (OSTI)

    HOFMAYER,C.MILLER,C.WANG,Y.COSTELLO,J.

    2003-07-15

    A research effort was undertaken to determine the need for any changes to USNRC's seismic regulatory practice to reflect the move, in the earthquake engineering community, toward using expected displacement rather than force (or stress) as the basis for assessing design adequacy. The research explored the extent to which displacement based seismic design methods, such as given in FEMA 273, could be useful for reviewing nuclear power stations. Two structures common to nuclear power plants were chosen to compare the results of the analysis models used. The first structure is a four-story frame structure with shear walls providing the primary lateral load system, referred herein as the shear wall model. The second structure is the turbine building of the Diablo Canyon nuclear power plant. The models were analyzed using both displacement based (pushover) analysis and nonlinear dynamic analysis. In addition, for the shear wall model an elastic analysis with ductility factors applied was also performed. The objectives of the work were to compare the results between the analyses, and to develop insights regarding the work that would be needed before the displacement based analysis methodology could be considered applicable to facilities licensed by the NRC. A summary of the research results, which were published in NUREGICR-6719 in July 2001, is presented in this paper.

  8. AGING SYSTEM DESIGN DEVELOPMENT STRATEGY

    SciTech Connect (OSTI)

    J. Beesley

    2005-02-07

    This plan provides an overview, work to date, and the path forward for the design development strategy of the Aging cask for aging commercial spent nuclear fuel (CSNF) at the Yucca Mountain Project (YMP) repository site. Waste for subsurface emplacement at the repository includes US Department of Energy (DOE) high-level radioactive waste (HLW), DOE SNF, commercial fuel in dual-purpose canisters (DPCs), uncanistered bare fuel, naval fuel, and other waste types. Table 1-1 lists the types of radioactive materials that may be aged at YMP, and those materials that will not be placed in an aging cask or module. This plan presents the strategy for design development of the Aging system. The Aging system will not handle naval fuel, DOE HLW, MCOs, or DOE SNF since those materials will be delivered to the repository in a state and sequence that allows them to be placed into waste packages for emplacement. Some CSNF from nuclear reactors, especially CSNF that is thermally too hot for emplacement underground, will need to be aged at the repository.

  9. Advanced Design Mixer Pump Tank 18 Design Modifications Summary Report

    SciTech Connect (OSTI)

    Adkins, B.J.

    2002-12-03

    The Westinghouse Savannah River Company (WSRC) is preparing to retrieve high level waste (HLW) from Tank 18 in early FY03 to provide feed for the Defense Waste Processing Facility (DWPF) and to support tank closure in FY04. As part of the Tank 18 project, WSRC will install a single Advanced Design Mixer Pump (ADMP) in the center riser of Tank 18 to mobilize, suspend, and mix radioactive sludge in preparation for transfer to Tank 7. The use of a single ADMP is a change to the current baseline of four (4) standard slurry pumps used during previous waste retrieval campaigns. The ADMP was originally conceived by Hanford and supported by SRS to provide a more reliable and maintainable mixer pump for use throughout the DOE complex. The ADMP underwent an extensive test program at SRS between 1998 and 2002 to assess reliability and hydraulic performance. The ADMP ran for approximately 4,200 hours over the four-year period. A detailed tear down and inspection of the pump following the 4,2 00-hour run revealed that the gas mechanical seals and anti-friction bearings would need to be refurbished/replaced prior to deployment in Tank 18. Design modifications were also needed to meet current Authorization Basis safety requirements. This report documents the modifications made to the ADMP in support of Tank 18 deployment. This report meets the requirements of Tanks Focus Area (TFA) Milestone 3591.4-1, ''Issue Report on Modifications Made to the ADMP,'' contained in Technical Task Plan (TTP) SR16WT51, ''WSRC Retrieval and Closure.''

  10. Digital fabrication in the architectural design process

    E-Print Network [OSTI]

    Seely, Jennifer C. K., 1975-

    2004-01-01

    Digital fabrication is affecting the architectural design process due to the increasingly important role it has in the fabrication of architectural models. Many design professionals, professors, and students have experienced ...

  11. High-performance braces for seismic design

    E-Print Network [OSTI]

    Lim, Tim S

    2013-01-01

    The fundamental challenge for the structural engineer in designing earthquake-resistant structures is to design buildings with both adequate ductility and sufficient stiffness. Traditional lateral force resisting systems ...

  12. Storied objects: design thinking with time

    E-Print Network [OSTI]

    Lee, Hyun-Yeul.

    2007-01-01

    The traditional approach to the design of everyday objects is articulated by form and function. This thesis aims to model an approach to design thinking that extends the praxis of form and function to include the expression ...

  13. Analysis and Design of Power Acceptability Curves

    E-Print Network [OSTI]

    Analysis and Design of Power Acceptability Curves for Industrial Loads Masters Thesis and Final Analysis and Design of Power Acceptability Curves for Industrial Loads Thesis and Final Report John Kyei

  14. Ecotransology : integrated design for urban mobility

    E-Print Network [OSTI]

    Joachim, Mitchell Whitney

    2006-01-01

    This thesis demonstrates a rethinking of urban mobility through ecological design. Human mobility and ecological accountability are inextricably linked in city design; our current world ecological crisis underscores this ...

  15. Computationally-guided Design of Polymer Electrolytes

    E-Print Network [OSTI]

    Stoltz, Brian M.

    carbonates. #12;Computationally-guided Design of Polymer Electrolytes Project Summary Michael Webb RigidRESEARCH HIGHLIGHTS Computationally-guided Design of Polymer Electrolytes From the Resnick of Polymer Electrolytes Global Significance While progress of sustainable energy- harvesting techniques

  16. 4.212 Design Fabrication, Spring 2003

    E-Print Network [OSTI]

    Sass, Lawrence

    Design Fabrication is an introductory course in the field of advanced computing, prototyping and building fabrication. The class is focused on the relationship between design, various forms of computer modeling both explicit ...

  17. SP.778 Toy Product Design, Spring 2006

    E-Print Network [OSTI]

    Kudrowitz, Barry

    This course is an introduction to the product design process with an emphasis on designing for children and entertainment. Students will work in small teams to develop a working prototype of a toy. Throughout the semester ...

  18. Mechanical design of a quadruped robot

    E-Print Network [OSTI]

    Ajilo, Deborah (Deborah M.)

    2015-01-01

    This thesis presents the mechanical design and fabrication of the Super Mini Cheetah (SMC) robot, a small ( 9kg) quadruped that is capable of jumping, bounding and trotting. The robot is designed using commercially available ...

  19. Toward Design of a Universal Flu Vaccine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Toward Design of a Universal Flu Vaccine Toward Design of a Universal Flu Vaccine Print Wednesday, 30 January 2013 00:00 Worldwide, influenza causes substantial deaths and yearly...

  20. ME6101: Engineering Design Semester Project Report

    E-Print Network [OSTI]

    ME6101: Engineering Design Semester Project Report: Systematic Design for Self-Organizing Systems as the process for completing our semester project. In this project report, we chose to compare the systematic

  1. Heating, Ventilation, and Air Conditioning Design

    E-Print Network [OSTI]

    Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder P% postconsumer waste #12;iii Heating, Ventilation, and Air Conditioning Design Strategy for a Hot

  2. Passive and active Reconfigurable antenna design

    E-Print Network [OSTI]

    Pfeifer, Holger

    and technology context - System integration - Semiconductor technologies and devices - MMIC design: MMICPassive and active Reconfigurable antenna design Doctoral course ­ Ulm, Germany - October 8-12 2012 - Introduction to components - Performance parameters for components - Microwave circuit and antenna analysis

  3. Utility Green Pricing Programs: Design, Implementation, and

    E-Print Network [OSTI]

    Utility Green Pricing Programs: Design, Implementation, and Consumer Response February 2004 · NREL-35618 Utility Green Pricing Programs: Design, Implementation, and Consumer Response Lori Bird, Blair Swezey legal liability or responsibility for the accuracy, completeness, or usefulness of any information

  4. Design requirements formulation : a framework and analysis

    E-Print Network [OSTI]

    Morocz Bazzani, Francisco Andres

    2013-01-01

    This thesis focuses on the early stages of the product development process, during which the set of design requirements is formulated. Given the proven importance of a comprehensive set of design requirements in the market ...

  5. The architecture of safety: hospital design

    E-Print Network [OSTI]

    Joseph, Anjali; Rashid, Mahbub

    2007-12-01

    Purpose of review: This paper reviews recent research literature reporting the effects of hospital design on patient safety. Recent findings: Features of hospital design that are linked to patient safety in the literature include noise, air...

  6. (NATIONAL SPHERICAL TORUS EXPERIMENT) STRUCTURAL DESIGN CRITERIA

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    NSTX (NATIONAL SPHERICAL TORUS EXPERIMENT) STRUCTURAL DESIGN CRITERIA NSTX-CRIT-0001-01 February Design Criteria Revision 1 RECORD OF REVISIONS REVISION DATE ECP DESCRIPTION OF CHANGE 0 AUGUST 2003. STRUCTURAL CRITERIA

  7. The Performance of a Mechanical Design 'Compiler'

    E-Print Network [OSTI]

    Ward, Allen C.

    1989-01-01

    A mechanical design "compiler" has been developed which, given an appropriate schematic, specifications, and utility function for a mechanical design, returns catalog numbers for an optimal implementation. The compiler ...

  8. Max Tech and Beyond Design Competition

    Broader source: Energy.gov [DOE]

    The Max Tech and Beyond Design Competition is an annual competition run by the Department of Energy (DOE) and the Lawrence Berkeley National Laboratory (LBNL) that challenges students to design...

  9. Complexity reduction in automotive design and development

    E-Print Network [OSTI]

    Ziegler, Ronald J., 1965-

    2005-01-01

    Automobiles are complex products. High product complexity drives high levels of design and process complexity and complicatedness. This thesis attempts to reduce complicatedness in the automotive vehicle design and development ...

  10. Diss. ETH NO. 19790 Geometric design alternatives

    E-Print Network [OSTI]

    Jenny, Bernhard

    ! 2! Paper I ­ Interactive design of 3D maps with progressive projection ____ 9! Abstract ________________________________ 15! The terrain-bending approach ____________________________________ 16! Unexplored approaches _________________________________________ 17! Interactive design of progressive bending for 2.5D terrain models___________ 17! Terrain base

  11. Design of an endoskeleton ski boot

    E-Print Network [OSTI]

    Pier, Jason D. (Jason David)

    2013-01-01

    The design of ski boots changed continually from the 1950's until the 1980's, at which point ski boot manufactures started making a plastic shell around a soft liner. This design, which hasn't changed significantly in the ...

  12. Physical layer model design for wireless networks 

    E-Print Network [OSTI]

    Yu, Yi

    2009-06-02

    Wireless network analysis and simulations rely on accurate physical layer models. The increased interest in wireless network design and cross-layer design require an accurate and efficient physical layer model especially when a large number of nodes...

  13. Parametric constructs : computational designs for digital fabrication

    E-Print Network [OSTI]

    Araya Goldberg, Sergio

    2006-01-01

    This thesis explores strategies for building design toolchains in order to design, develop and fabricate architectural forms. The hipothesys of this research is that by embedding ruled based procedures addressing generative, ...

  14. Self-bearing motor design & control

    E-Print Network [OSTI]

    Imani Nejad, Mohammad

    2013-01-01

    This thesis presents the design, implementation and control of a new class of self-bearing motors. The primary thesis contributions include the design and experimental demonstration of hysteresis self-bearing motors, novel ...

  15. Conceptual Phase Structural Design Tool for Microsatellites

    E-Print Network [OSTI]

    McLinko, Ryan (Ryan M.)

    2011-01-01

    Gaining traction or momentum in the conceptual design phase for a complex system can be an arduous and daunting process, whether the complex system being designed is a satellite, airplane, car, or one of countless other ...

  16. Outsourcing the Design of Structural Building Components

    E-Print Network [OSTI]

    Swearingin, Adam V.

    2008-05-16

    . This project contains an examination of the tasks associated with the design of structural building components. These tasks are evaluated to determine the feasibility of outsourcing any or all “core competencies” to a consultant which employs design...

  17. Material and processes selection in conceptual design 

    E-Print Network [OSTI]

    Krishnakumar, Karthikeyan

    2005-02-17

    Materials and manufacturing processes are an integral part of the design of a product. The need to combine materials and manufacturing processes selection during the early stages of the design has previously been realized. The work that generally...

  18. Design of a tabletop lathe educational kit

    E-Print Network [OSTI]

    Lopez, Marcus, S.B. Massachusetts Institute of Technology

    2008-01-01

    The purpose of this research is to create and characterize an educational kit for the mechanical engineering courses, 2.75: Precision Machine Design and 2.72: Elements of Machine Design. This kit is intended to provide ...

  19. Sensor-based organizational design and engineering

    E-Print Network [OSTI]

    Olguín Olguín, Daniel

    2011-01-01

    We propose a sensor-based organizational design and engineering approach that combines behavioral sensor data with other sources of information such as e-mail, surveys, and performance data in order to design interventions ...

  20. Design for Energy Efficiency in Residential Buildings 

    E-Print Network [OSTI]

    Song, M.; Zhang, Y.; Yang, G.

    2006-01-01

    This paper presents the thermal design and heating design of an energy saving residential building in Beijing where the owners lived until 2004. Results show the advantages and disadvantages of a household-based heating mode by natural gas. Based...

  1. Exploration games for UML software design 

    E-Print Network [OSTI]

    Tenzer, Jennifer

    The Unified Modeling Language (UML) has become the standard language for the design of object-oriented software systems over the past decade. Even though there exist various tools which claim to support design with UML, ...

  2. A visual approach for exploring computational design

    E-Print Network [OSTI]

    McGill, Miranda Clare, 1973-

    2001-01-01

    This thesis concerns the use of computers for learning about computational design and shape grammars. It discusses how software can be developed to create "microworlds" for designing, and how to take into account the needs ...

  3. SECTION FOUR Site Design Guidelines Bicycle Systems

    E-Print Network [OSTI]

    Stuart, Steven J.

    SECTION FOUR Site Design Guidelines Bicycle Systems 26 4, the following should be considered when designa ng bicycle routes on roadways: Vehicular speed limits; SECTION FOUR Site Design Guidelines Bicycle Systems 27 4.2 BIKE LANES Bike lanes

  4. Creativity Support for Designing Ubiquitous Computing Applications

    E-Print Network [OSTI]

    Creativity Support for Designing Ubiquitous Computing Applications Bettina Conradi University Amalienstr.17 Munich, Germany heinrich.hussmann@ifi.lmu.de ABSTRACT Designing ubiquitous computing Keywords Creativity, creativity tool-support, ubiquitous computing 1. MOTIVATION Ubiquitous computing

  5. A multiobjective, multidisciplinary design optimization methodology for the conceptual design of distributed satellite systems

    E-Print Network [OSTI]

    Jilla, Cyrus D., 1974-

    2002-01-01

    A multiobjective, multidisciplinary design optimization methodology for mathematically modeling the distributed satellite system (DSS) conceptual design problem as an optimization problem has been developed to advance the ...

  6. Cryptographic Trust Management System Design Document

    SciTech Connect (OSTI)

    Edgar, Thomas W.; Clements, Samuel L.; Hadley, Mark D.; Maiden, Wendy M.; Manz, David O.; Zabriskie, Sean J.

    2010-08-04

    Deliverable for DOE NSTB Cryptographic Trust Management project. Design document to follow the Requirements document submitted in Sept 2009.

  7. Design exploration: engaging a larger user population 

    E-Print Network [OSTI]

    Moore, John Michael

    2009-06-02

    xii Page APPENDIX A DESIGN EXPLORATION STOPWORDS ..........................................125 APPENDIX B ANALYZER STUDY TUTORIALS ....................................................126 APPENDIX C ANALYZER STUDY SCENARIOS...

  8. Energy Security: Microgrid Planning and Design (Presentation)

    SciTech Connect (OSTI)

    Giraldez, J.

    2012-05-01

    Energy Security: Microgrid Planning and Design presentation to be given at the 2012 WREF in Denver, CO.

  9. ANS Standards to Support DOE NPH Design

    Office of Energy Efficiency and Renewable Energy (EERE)

    ANS Standards to Support DOE NPH Design DOE NPH Workshop, Germantown, MD Carl Mazzola, CFS October 22, 2014

  10. Track 5: Integration of Safety Into Design

    Broader source: Energy.gov [DOE]

    ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 5: Integration of Safety Into Design

  11. Integrating Experimental Design Into Your Program

    Broader source: Energy.gov [DOE]

    This presentation, given through the DOE's Technical Assitance Program (TAP), exaplin how you can integrate experimental design into your program.

  12. Integrating Experimental Design Into Your Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    This presentation, given through the DOE's Technical Assistance Program (TAP), explain how you can integrate experimental design into your program.

  13. Manufacturing-aware physical design techniques

    E-Print Network [OSTI]

    Sharma, Puneet

    2007-01-01

    C. Design for Manufacturing . . . . . . . . . . .for Microelectronic Manufacturing, 2006, pp. 61560T-1 –for Microelectronic Manufacturing, vol. 5042, 2003, pp. 99–

  14. Proactive Strategies for Designing Thermoelectric Materials for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Proactive Strategies for Designing Thermoelectric Materials for Power Generation Thermoelectric Couple Demonstration of (In,...

  15. Update on Co-Design @ Los Alamos

    SciTech Connect (OSTI)

    McPherson, Allen L. [Los Alamos National Laboratory

    2012-06-11

    We present an update on current co-design work at LANL. We describe three non-ASC co-design projects: CoCoMANS (LDRD), ExMatEx (ASCR) and the Co-Design Summer School (IS and T). For each project we give a brief overview of the project plans and status.

  16. SECTION ONE Site Design Guidelines Introduc on

    E-Print Network [OSTI]

    Stuart, Steven J.

    land use, landscape design, transporta on sys- tems and green building techniques. The integraSECTION ONE Site Design Guidelines Introduc on 1 1.0 INTRODUCTION of place. The Site Design Guidelines serve as a guide for all site and landscaping improvements

  17. Robust Methods for Engineering Design Optimization

    E-Print Network [OSTI]

    Dennis, Brian

    · Optimized design is 3% more efficient than usual straight blade #12;6 Optimization of Turbine Stator1 Robust Methods for Engineering Design Optimization Brian Dennis, PhD Research Associate ADVENTURE Project University of Tokyo Outline · Introduction · Robust Algorithms for Design Optimization · Example

  18. A Tor Design Proposal November 30, 2005

    E-Print Network [OSTI]

    by the observation that Tor is currently difficult to install and that users are generally unfamiliar with onionFoxTor A Tor Design Proposal November 30, 2005 1.0 Design Overview ..........................................................................4 3.0 Tor User Interface Design

  19. Canadian Conference on Effective Design of Structures

    E-Print Network [OSTI]

    Bruneau, Michel

    This paper provides a brief review of recent work on the development of solutions for the seismic design structures. Keywords: Steel structures, bridges, buildings, seismic, design, retrofit Introduction Although1st Canadian Conference on Effective Design of Structures McMaster University Hamilton, Ontario

  20. DEVELOPMENT OF OPTIMUM DESIGN CONFIGURATION AND

    E-Print Network [OSTI]

    DEVELOPMENT OF OPTIMUM DESIGN CONFIGURATION AND PERFORMANCE FOR VERTICAL AXIS WIND TURBINE Prepared DESIGN CONFIGURATION AND PERFORMANCE FOR VERTICAL AXIS WIND TURBINE EISG AWARDEE Mechanical and Aerospace://www.energy.ca.gov/research/index.html. #12;Page 1 Development Of Optimum Design Configuration And Performance For Vertical Axis Wind Turbine

  1. Introduction to Mechanism Design Mathijs de Weerdt

    E-Print Network [OSTI]

    de Weerdt, Mathijs

    Introduction to Mechanism Design Mathijs de Weerdt Slides loosely based on EASSS tutorial with Paul of Technology December 8, 2009 Mathijs de Weerdt (TUD) Mechanism Design December 8, 2009 1 / 57 #12;Introduction a background on what's (not) possible when designing multiagent systems Mathijs de Weerdt (TUD) Mechanism

  2. Teaching Computer-Aided Mechanism Design and

    E-Print Network [OSTI]

    Cheng, Harry H.

    Teaching Computer-Aided Mechanism Design and Analysis Using a High-Level Mechanism Toolkit MATT into a course on mechanism analysis and design is presented. Mechanism analysis is enhanced when coupled computing environment. By solving mechanism design problems in C/Cþþ, the programming skills gained

  3. Narrowband Control Design for Smart Structural Systems

    E-Print Network [OSTI]

    Narrowband Control Design for Smart Structural Systems Daniel J. Kolepp and Ralph C. Smith 1 Center structures but is suÆciently simple to facilitate initial control design. A PDE model for the structure be employed for structural acoustic control design or control of adjacent ows. In this paper, we focus

  4. RELIABILITY-BASED CASTING PROCESS DESIGN OPTIMIZATION

    E-Print Network [OSTI]

    Beckermann, Christoph

    , shrinkage porosity in the casting. Despite the power and promise of these developments in casting processRELIABILITY-BASED CASTING PROCESS DESIGN OPTIMIZATION Richard Hardin1 , K.K. Choi1 , and Christoph 52242-1527 Keywords: Casting Process Design, Optimization, Reliability-Based Design Optimization

  5. RTL Hardware Design Chapter 11 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 11 1 Register Transfer Methodology I RTL Hardware Design of FSMD 6. Sequential add-and-shift multiplier RTL Hardware Design by P. Chu Chapter 11 3 1. Introduction · How to realize an algorithm in hardware? · Two characteristics of an algorithm: ­ Use of variables

  6. RTL Hardware Design Chapter 11 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 11 1 Register Transfer Methodology I #12;RTL Hardware Design of FSMD 6. Sequential add-and-shift multiplier #12;RTL Hardware Design by P. Chu Chapter 11 3 1. Introduction · How to realize an algorithm in hardware? · Two characteristics of an algorithm: ­ Use

  7. RTL Hardware Design Chapter 8 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 8 1 Sequential Circuit Design: Principle #12;RTL Hardware analysis 7. Alternative one-segment coding style 8. Use of variable for sequential circuit #12;RTL Hardware latch ­ D FF (Flip-Flop) ­ RAM · Synchronous vs asynchronous circuit #12;RTL Hardware Design by P. Chu

  8. RTL Hardware Design Chapter 2 1

    E-Print Network [OSTI]

    Chu, Pong P.

    RTL Hardware Design by P. Chu Chapter 2 1 Hardware Description Language #12;RTL Hardware Design by P. Chu Chapter 2 2 Outline 1. Overview on hardware description language 2. Basic VHDL Concept via an example 3. VHDL in development flow #12;RTL Hardware Design by P. Chu Chapter 2 3 1. Overview on hardware

  9. RTL Hardware Design Chapter 8 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 8 1 Sequential Circuit Design: Principle RTL Hardware analysis 7. Alternative one-segment coding style 8. Use of variable for sequential circuit RTL Hardware latch ­ D FF (Flip-Flop) ­ RAM · Synchronous vs asynchronous circuit RTL Hardware Design by P. Chu

  10. RTL Hardware Design Chapter 2 1

    E-Print Network [OSTI]

    Chu, Pong P.

    1 RTL Hardware Design by P. Chu Chapter 2 1 Hardware Description Language RTL Hardware Design by P. Chu Chapter 2 2 Outline 1. Overview on hardware description language 2. Basic VHDL Concept via an example 3. VHDL in development flow RTL Hardware Design by P. Chu Chapter 2 3 1. Overview on hardware

  11. Sustainable Design and Green Building Toolkit

    E-Print Network [OSTI]

    Sustainable Design and Green Building Toolkit F O R L O C A L G O V E R N M E N T S EPA 904B10001 | June 2010 #12;Disclaimer The Sustainable Design and Green Building Toolkit for Local Governments presented at non-EPA Web sites, or guarantee the validity of the information provided. iSustainable Design

  12. Ceremony Design and Analysis Carl Ellison

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Ceremony Design and Analysis Carl Ellison Microsoft Corporation, One Microsoft Way, Redmond WA-of-band to a protocol is in-band to a ceremony, and therefore subject to design and analysis using variants of the same mature techniques used for the design and analysis of protocols. Ceremonies include all protocols

  13. Design by Directed Evolution FRANCES H. ARNOLD*

    E-Print Network [OSTI]

    Haile, Sossina M.

    Design by Directed Evolution FRANCES H. ARNOLD* Division of Chemistry and Chemical Engineering 210 to "Irrational" Design The stunning array of features and functions exhibited by proteins in nature should convince most scientists of the power of evolutionary design processes. Natural selection acting

  14. CONFERENCES AND SYMPOSIA FUSION REACTOR DESIGN IV

    E-Print Network [OSTI]

    Abdou, Mohamed

    in the physics of laser-target interactions, target design and implosion experiments; 5.3. New ICF reactorCONFERENCES AND SYMPOSIA FUSION REACTOR DESIGN IV Report on the Fourth IAEA Technical Committee Reactor Design and Technology at Yalta, USSR, from 26 May -- 6 June 1986. This report contains all

  15. Accident or Design Taeil A. Bai

    E-Print Network [OSTI]

    Bai, Taeil

    to this principle, a life-giving factor lies at the center of the whole machinery and design of the world. Here weAccident or Design Taeil A. Bai Stanford University, Stanford, CA 94305 In a companion article find the word "design," which has been expelled from biological scholarship by the biologists. Here we

  16. MIT System Design and Management Program

    E-Print Network [OSTI]

    de Weck, Olivier L.

    , disseminating, and preserving knowledge, and to working with others to bring this knowledge to bear on the worldMIT System Design and Management Program MIT System Design and Management Program Leadership, innovation, systems thinking #12;MIT System Design and Management Program #12;about MIT The mission of MIT

  17. Axiomatic system design : chemical mechanical polishing machine case study

    E-Print Network [OSTI]

    Melvin, Jason W. (Jason Webley)

    2003-01-01

    Axiomatic design is investigated as a design methodology for large or complex system design. Particular considerations of system design are described and the suitability of axiomatic design for such considerations is ...

  18. Ali Fatemi -University of Toledo All Rights Reserved Chapter 2Fatigue Design Methods 1 FATIGUE DESIGN METHODS

    E-Print Network [OSTI]

    Fatemi, Ali

    Methods 8 FATIGUE DESIGN CRITERIA (CONT'D) Infinite-Life Design Unlimited safety is the oldest criterion Methods 2 FATIGUE DESIGN METHODS STRATEGIES IN FATIGUE DESIGN FATIGUE DESIGN CRITERIA ANALYSIS Design Methods 7 FATIGUE DESIGN CRITERIA Criteria for fatigue design have evolved from infinite life

  19. Closure and Sealing Design Calculation

    SciTech Connect (OSTI)

    T. Lahnalampi; J. Case

    2005-08-26

    The purpose of the ''Closure and Sealing Design Calculation'' is to illustrate closure and sealing methods for sealing shafts, ramps, and identify boreholes that require sealing in order to limit the potential of water infiltration. In addition, this calculation will provide a description of the magma that can reduce the consequences of an igneous event intersecting the repository. This calculation will also include a listing of the project requirements related to closure and sealing. The scope of this calculation is to: summarize applicable project requirements and codes relating to backfilling nonemplacement openings, removal of uncommitted materials from the subsurface, installation of drip shields, and erecting monuments; compile an inventory of boreholes that are found in the area of the subsurface repository; describe the magma bulkhead feature and location; and include figures for the proposed shaft and ramp seals. The objective of this calculation is to: categorize the boreholes for sealing by depth and proximity to the subsurface repository; develop drawing figures which show the location and geometry for the magma bulkhead; include the shaft seal figures and a proposed construction sequence; and include the ramp seal figure and a proposed construction sequence. The intent of this closure and sealing calculation is to support the License Application by providing a description of the closure and sealing methods for the Safety Analysis Report. The closure and sealing calculation will also provide input for Post Closure Activities by describing the location of the magma bulkhead. This calculation is limited to describing the final configuration of the sealing and backfill systems for the underground area. The methods and procedures used to place the backfill and remove uncommitted materials (such as concrete) from the repository and detailed design of the magma bulkhead will be the subject of separate analyses or calculations. Post-closure monitoring will not be addressed in this calculation.

  20. Fusion Engineering and Design 4950 (2000) 689695 ARIES-ST breeding blanket design and analysis

    E-Print Network [OSTI]

    Pulsifer, John

    2000-01-01

    Fusion Engineering and Design 49­50 (2000) 689­695 ARIES-ST breeding blanket design and analysis-ST is a 1000 MW fusion power plant conceptual design based on a low aspect ratio `spherical torus' (ST) plasma-cooled ferritic steel structures. The main features of the blanket design are summarized here together