National Library of Energy BETA

Sample records for design toolkit redirected

  1. Designing Incentives Toolkit Better Buildings Residential Network

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Designing Incentives Toolkit BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn T his Better Buildings Residential Network toolkit addresses the challenges and opportunities of using incentives to increase the volume of home energy upgrades. The topic was chosen as a priority by Residential Network members, who also served on a working group that reviewed this toolkit. Residential energy efficiency programs offer incentives as a way to encourage action from

  2. Financing Initiatives Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Potential Toolkit Building Energy Assessment Toolkit Power System Screening and Design Toolkit Land Use Assessment Toolkit Bioenergy Assessment Toolkit Transportation...

  3. Voluntary Initiative: Designing Incentives Toolkit

    Broader source: Energy.gov [DOE]

    Design incentives that motivate potential customers to act by lowering the risk, decreasing the cost, or offering additional benefits of home energy upgrades.

  4. Supervisor Toolkit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supervisor Toolkit

  5. Project Screening and Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  6. Policy and Program Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  7. Microgrid Design Toolkit (MDT) Technical Documentation and Component Summaries

    SciTech Connect (OSTI)

    Arguello, Bryan; Gearhart, Jared Lee; Jones, Katherine A.; Eddy, John P.

    2015-09-01

    The Microgrid Design Toolkit (MDT) is a decision support software tool for microgrid designers to use during the microgrid design process. The models that support the two main capabilities in MDT are described. The first capability, the Microgrid Sizing Capability (MSC), is used to determine the size and composition of a new microgrid in the early stages of the design process. MSC is a mixed-integer linear program that is focused on developing a microgrid that is economically viable when connected to the grid. The second capability is focused on refining a microgrid design for operation in islanded mode. This second capability relies on two models: the Technology Management Optimization (TMO) model and Performance Reliability Model (PRM). TMO uses a genetic algorithm to create and refine a collection of candidate microgrid designs. It uses PRM, a simulation based reliability model, to assess the performance of these designs. TMO produces a collection of microgrid designs that perform well with respect to one or more performance metrics.

  8. Design and performance of a scalable, parallel statistics toolkit.

    SciTech Connect (OSTI)

    Thompson, David C.; Bennett, Janine Camille; Pebay, Philippe Pierre

    2010-11-01

    Most statistical software packages implement a broad range of techniques but do so in an ad hoc fashion, leaving users who do not have a broad knowledge of statistics at a disadvantage since they may not understand all the implications of a given analysis or how to test the validity of results. These packages are also largely serial in nature, or target multicore architectures instead of distributed-memory systems, or provide only a small number of statistics in parallel. This paper surveys a collection of parallel implementations of statistics algorithm developed as part of a common framework over the last 3 years. The framework strategically groups modeling techniques with associated verification and validation techniques to make the underlying assumptions of the statistics more clear. Furthermore it employs a design pattern specifically targeted for distributed-memory parallelism, where architectural advances in large-scale high-performance computing have been focused. Moment-based statistics (which include descriptive, correlative, and multicorrelative statistics, principal component analysis (PCA), and k-means statistics) scale nearly linearly with the data set size and number of processes. Entropy-based statistics (which include order and contingency statistics) do not scale well when the data in question is continuous or quasi-diffuse but do scale well when the data is discrete and compact. We confirm and extend our earlier results by now establishing near-optimal scalability with up to 10,000 processes.

  9. The model coupling toolkit.

    SciTech Connect (OSTI)

    Larson, J. W.; Jacob, R. L.; Foster, I.; Guo, J.

    2001-04-13

    The advent of coupled earth system models has raised an important question in parallel computing: What is the most effective method for coupling many parallel models to form a high-performance coupled modeling system? We present our solution to this problem--The Model Coupling Toolkit (MCT). We explain how our effort to construct the Next-Generation Coupler for NCAR Community Climate System Model motivated us to create this toolkit. We describe in detail the conceptual design of the MCT and explain its usage in constructing parallel coupled models. We present preliminary performance results for the toolkit's parallel data transfer facilities. Finally, we outline an agenda for future development of the MCT.

  10. Water Security Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-09-11

    The Water Security Toolkit (WST) provides software for modeling and analyzing water distribution systems to minimize the potential impact of contamination incidents. WST wraps capabilities for contaminant transport, impact assessment, and sensor network design with response action plans, including source identification, rerouting, and decontamination, to provide a range of water security planning and real-time applications.

  11. Help:Redirects | Open Energy Information

    Open Energy Info (EERE)

    REDIRECT pagename If the pagename as you typed it is not a valid page, it will show in red. Until there is a valid destination page, you should not make the redirect. Viewing a...

  12. Widget:GeneralRedirect | Open Energy Information

    Open Energy Info (EERE)

    GeneralRedirect Jump to: navigation, search This widget will redirect the browser to a URL that mediawiki doesn't know about (such as datasets). This widget will take a URL...

  13. TOOLKIT FOR ADVANCED OPTIMIZATION

    Energy Science and Technology Software Center (OSTI)

    2000-10-13

    The TAO project focuses on the development of software for large scale optimization problems. TAO uses an object-oriented design to create a flexible toolkit with strong emphasis on the reuse of external tools where appropriate. Our design enables bi-directional connection to lower level linear algebra support (for example, parallel sparse matrix data structures) as well as higher level application frameworks. The Toolkist for Advanced Optimization (TAO) is aimed at teh solution of large-scale optimization problemsmore » on high-performance architectures. Our main goals are portability, performance, scalable parallelism, and an interface independent of the architecture. TAO is suitable for both single-processor and massively-parallel architectures. The current version of TAO has algorithms for unconstrained and bound-constrained optimization.« less

  14. Agricultural Marketing Toolkit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agricultural-Marketing-Toolkit Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors...

  15. Commercial Marketing Toolkit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercial-Marketing-Toolkit Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors Technology...

  16. Mesh Quality Improvement Toolkit

    Energy Science and Technology Software Center (OSTI)

    2002-11-15

    MESQUITE is a linkable software library to be used by simulation and mesh generation tools to improve the quality of meshes. Mesh quality is improved by node movement and/or local topological modifications. Various aspects of mesh quality such as smoothness, element shape, size, and orientation are controlled by choosing the appropriate mesh qualtiy metric, and objective function tempate, and a numerical optimization solver to optimize the quality of meshes, MESQUITE uses the TSTT mesh interfacemore » specification to provide an interoperable toolkit that can be used by applications which adopt the standard. A flexible code design makes it easy for meshing researchers to add additional mesh quality metrics, templates, and solvers to develop new quality improvement algorithms by making use of the MESQUITE infrastructure.« less

  17. Parallel Power Grid Simulation Toolkit

    Energy Science and Technology Software Center (OSTI)

    2015-09-14

    ParGrid is a 'wrapper' that integrates a coupled Power Grid Simulation toolkit consisting of a library to manage the synchronization and communication of independent simulations. The included library code in ParGid, named FSKIT, is intended to support the coupling multiple continuous and discrete even parallel simulations. The code is designed using modern object oriented C++ methods utilizing C++11 and current Boost libraries to ensure compatibility with multiple operating systems and environments.

  18. LEDSGP/tools/toolkits | Open Energy Information

    Open Energy Info (EERE)

    Knowledge Portals LEDS Benefits Back to top LEDS-Related Toolkits DIA Toolkit This Development Impacts Assessment Toolkit helps country, regional, and local policymakers...

  19. Better Buildings Training Toolkit

    Broader source: Energy.gov [DOE]

    The Better Buildings Residential Network Training Toolkit can be used by residential energy efficiency programs interested in realizing the value of providing training opportunities for contractors, staff, and volunteers.

  20. Device and method for redirecting electromagnetic signals

    DOE Patents [OSTI]

    Garcia, Ernest J. (823 Piedra Larga, NE., Albuquerque, NM 87123)

    1999-01-01

    A device fabricated to redirect electromagnetic signals, the device including a primary driver adapted to provide a predetermined force, a linkage system coupled to the primary driver, a pusher rod rotationally coupled to the linkage system, a flexible rod element attached to the pusher rod and adapted to buckle upon the application of the predetermined force, and a mirror structure attached to the flexible rod element at one end and to the substrate at another end. When the predetermined force buckles the flexible rod element, the mirror structure and the flexible rod element both move to thereby allow a remotely-located electromagnetic signal directed towards the device to be redirected.

  1. Quarterly Cybersecurity Awareness Campaigns and Toolkits | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quarterly Cybersecurity Awareness Campaigns and Toolkits Quarterly Cybersecurity Awareness Campaigns and Toolkits The OCIO coordinates quarterly cybersecurity awareness campaigns ...

  2. Workplace Charging Toolkit: Workshop Speaker Outreach Letter...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outreach Letter Template More Documents & Publications Workplace Charging Toolkit: Workshop Host Outreach Letter Template Workplace Charging Toolkit: Workshop Speaker Instruction...

  3. Structural Simulation Toolkit. Lunch & Learn

    SciTech Connect (OSTI)

    Moore, Branden J.; Voskuilen, Gwendolyn Renae; Rodrigues, Arun F.; Hammond, Simon David; Hemmert, Karl Scott

    2015-09-01

    This is a presentation outlining a lunch and learn lecture for the Structural Simulation Toolkit, supported by Sandia National Laboratories.

  4. NREL: International Activities - Geospatial Toolkits

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geospatial Toolkit The Geospatial Toolkit is an NREL-developed map-based software application that integrates resource data and other geographic information systems (GIS) data for integrated resource assessment. The non-resource, country-specific data for each toolkit comes from a variety of agencies within each country as well as from global datasets. Funding for the toolkit was provided by the United States Agency for International Development (USAID), United States Trade and Development

  5. Web Redirect and Bookmark Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Process & Approvals » Web Redirect and Bookmark Requirements Web Redirect and Bookmark Requirements If you archive or move an established Office of Energy Efficiency and Renewable Energy (EERE) website or Web content, use redirects or bookmarks to help users understand and navigate the changes. Below are the requirements and best practices. Bookmarks Bookmarks are useful when you need to explain changes to your readers. Bookmarks redirect users from the "old" URL to a

  6. A toolkit for building earth system models

    SciTech Connect (OSTI)

    Foster, I.

    1993-03-01

    An earth system model is a computer code designed to simulate the interrelated processes that determine the earth's weather and climate, such as atmospheric circulation, atmospheric physics, atmospheric chemistry, oceanic circulation, and biosphere. I propose a toolkit that would support a modular, or object-oriented, approach to the implementation of such models.

  7. A toolkit for building earth system models

    SciTech Connect (OSTI)

    Foster, I.

    1993-03-01

    An earth system model is a computer code designed to simulate the interrelated processes that determine the earth`s weather and climate, such as atmospheric circulation, atmospheric physics, atmospheric chemistry, oceanic circulation, and biosphere. I propose a toolkit that would support a modular, or object-oriented, approach to the implementation of such models.

  8. Social Media Toolkit

    Broader source: Energy.gov [DOE]

    This Better Buildings Residential Network toolkit can be used to help residential energy efficiency programs learn to engage potential customers through social media. Social media can build brand awareness concerning home energy upgrades and the entities working on them, which can lead to more energy upgrade projects taking place in the long run.

  9. Light Redirective Display Panel And A Method Of Making A Light Redirective Display Panel

    DOE Patents [OSTI]

    Veligdan, James T. (Manorville, NY)

    2005-07-26

    An optical display panel which provides improved light intensity at a viewing angle by redirecting light emitting from the viewing screen, and a method of making a light redirective display panel, are disclosed. The panel includes an inlet face at one end for receiving light, and an outlet screen at an opposite end for displaying the light. The inlet face is defined at one end of a transparent body, which body may be formed by a plurality of waveguides, and the outlet screen is defined at an opposite end of the body. The screen includes light redirective elements at the outlet screen for re-directing light emitting from the outlet screen. The method includes stacking a plurality of glass sheets, with a layer of adhesive or epoxy between each sheet, curing the adhesive to form a stack, placing the stack against a saw and cutting the stack at two opposite ends to form a wedge-shaped panel having an inlet face and an outlet face, and forming at the outlet face a plurality of light redirective elements which direct light incident on the outlet face into a controlled light cone.

  10. Light redirective display panel and a method of making a light redirective display panel

    DOE Patents [OSTI]

    Veligdan, James T. (Manorville, NY)

    2002-01-01

    An optical display panel which provides improved light intensity at a viewing angle by redirecting light emitting from the viewing screen, and a method of making a light redirective display panel, are disclosed. The panel includes an inlet face at one end for receiving light, and an outlet screen at an opposite end for displaying the light. The inlet face is defined at one end of a transparent body, which body may be formed by a plurality of waveguides, and the outlet screen is defined at an opposite end of the body. The screen includes light redirective elements at the outlet screen for re-directing light emitting from the outlet screen. The method includes stacking a plurality of glass sheets, with a layer of adhesive or epoxy between each sheet, curing the adhesive to form a stack, placing the stack against a saw and cutting the stack at two opposite ends to form a wedge-shaped panel having an inlet face and an outlet face, and forming at the outlet face a plurality of light redirective elements which direct light incident on the outlet face into a controlled light cone.

  11. Geospatial Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Laboratory (NREL). It integrates resource data and geographic information systems (GIS) - for integrated resource assessment. The Geospatial Toolkit (GsT) is a map-based...

  12. Bioenergy Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Bioenergy Toolkit Jump to: navigation, search Stage 3 LEDS Home Introduction to Framework Assess current country plans, policies, practices, and capacities DevelopBAU Stage 4:...

  13. REEEP Toolkits | Open Energy Information

    Open Energy Info (EERE)

    Policiesdeployment programs, Resource assessment, Pathways analysis, Background analysis Resource Type: Dataset References: REEEP Toolkit 1 This article is a stub. You...

  14. Building Energy Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  15. Impact Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  16. Supporting Small Forest Enterprises: A Facilitator's Toolkit...

    Open Energy Info (EERE)

    Small Forest Enterprises: A Facilitator's Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Supporting Small Forest Enterprises: A Facilitator's Toolkit Agency...

  17. Multiphysics Application Coupling Toolkit

    Energy Science and Technology Software Center (OSTI)

    2013-12-02

    This particular consortium implementation of the software integration infrastructure will, in large part, refactor portions of the Rocstar multiphysics infrastructure. Development of this infrastructure originated at the University of Illinois DOE ASCI Center for Simulation of Advanced Rockets (CSAR) to support the center's massively parallel multiphysics simulation application, Rocstar, and has continued at IllinoisRocstar, a small company formed near the end of the University-based program. IllinoisRocstar is now licensing these new developments as free, openmore » source, in hopes to help improve their own and others' access to infrastructure which can be readily utilized in developing coupled or composite software systems; with particular attention to more rapid production and utilization of multiphysics applications in the HPC environment. There are two major pieces to the consortium implementation, the Application Component Toolkit (ACT), and the Multiphysics Application Coupling Toolkit (MPACT). The current development focus is the ACT, which is (will be) the substrate for MPACT. The ACT itself is built up from the components described in the technical approach. In particular, the ACT has the following major components: 1.The Component Object Manager (COM): The COM package provides encapsulation of user applications, and their data. COM also provides the inter-component function call mechanism. 2.The System Integration Manager (SIM): The SIM package provides constructs and mechanisms for orchestrating composite systems of multiply integrated pieces.« less

  18. Application experiences with the Globus toolkit.

    SciTech Connect (OSTI)

    Brunett, S.

    1998-06-09

    The Globus grid toolkit is a collection of software components designed to support the development of applications for high-performance distributed computing environments, or ''computational grids'' [14]. The Globus toolkit is an implementation of a ''bag of services'' architecture, which provides application and tool developers not with a monolithic system but rather with a set of stand-alone services. Each Globus component provides a basic service, such as authentication, resource allocation, information, communication, fault detection, and remote data access. Different applications and tools can combine these services in different ways to construct ''grid-enabled'' systems. The Globus toolkit has been used to construct the Globus Ubiquitous Supercomputing Testbed, or GUSTO: a large-scale testbed spanning 20 sites and included over 4000 compute nodes for a total compute power of over 2 TFLOPS. Over the past six months, we and others have used this testbed to conduct a variety of application experiments, including multi-user collaborative environments (tele-immersion), computational steering, distributed supercomputing, and high throughput computing. The goal of this paper is to review what has been learned from these experiments regarding the effectiveness of the toolkit approach. To this end, we describe two of the application experiments in detail, noting what worked well and what worked less well. The two applications are a distributed supercomputing application, SF-Express, in which multiple supercomputers are harnessed to perform large distributed interactive simulations; and a tele-immersion application, CAVERNsoft, in which the focus is on connecting multiple people to a distributed simulated world.

  19. Active Wake Redirection Control to Improve Energy Yield (Poster)

    SciTech Connect (OSTI)

    Churchfield, M. J.; Fleming, P.; DeGeorge, E.; Bulder, B; White, S. M.

    2014-10-01

    Wake effects can dramatically reduce the efficiency of waked turbines relative to the unwaked turbines. Wakes can be deflected, or 'redirected,' by applying yaw misalignment to the turbines. Yaw misalignment causes part of the rotor thrust vector to be pointed in the cross-stream direction, deflecting the flow and the wake. Yaw misalignment reduces power production, but the global increase in wind plant power due to decreased wake effect creates a net increase in power production. It is also a fairly simple control idea to implement at existing or new wind plants. We performed high-fidelity computational fluid dynamics simulations of the wake flow of the proposed Fishermen's Atlantic City Windfarm (FACW) that predict that under certain waking conditions, wake redirection can increase plant efficiency by 10%. This means that by applying wake redirection control, for a given watersheet area, a wind plant can either produce more power, or the same amount of power can be produced with a smaller watersheet area. With the power increase may come increased loads, though, due to the yaw misalignment. If misalignment is applied properly, or if layered with individual blade pitch control, though, the load increase can be mitigated. In this talk we will discuss the concept of wake redirection through yaw misalignment and present our CFD results of the FACW project. We will also discuss the implications of wake redirection control on annual energy production, and finally we will discuss plans to implement wake redirection control at FACW when it is operational.

  20. SEP Toolkit Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Toolkit Overview SEP Toolkit Overview PDF icon Overview.pdf More Documents & Publications Industrial SEP Ratepayer-funded Accelerator Factsheet SEP Overview Slides Superior Energy Performance: Better Plants Webinar

  1. Modeling Momentum Transfer from Kinetic Impacts: Implications for Redirecting Asteroids

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Stickle, A. M.; Atchison, J. A.; Barnouin, O. S.; Cheng, A. F.; Crawford, D. A.; Ernst, C. M.; Fletcher, Z.; Rivkin, A. S.

    2015-05-19

    Kinetic impactors are one way to deflect a potentially hazardous object headed for Earth. The Asteroid Impact and Deflection Assessment (AIDA) mission is designed to test the effectiveness of this approach and is a joint effort between NASA and ESA. The NASA-led portion is the Double Asteroid Redirect Test (DART) and is composed of a ~300-kg spacecraft designed to impact the moon of the binary system 65803 Didymos. The deflection of the moon will be measured by the ESA-led Asteroid Impact Mission (AIM) (which will characterize the moon) and from ground-based observations. Because the material properties and internal structure ofmore » the target are poorly constrained, however, analytical models and numerical simulations must be used to understand the range of potential outcomes. Here, we describe a modeling effort combining analytical models and CTH simulations to determine possible outcomes of the DART impact. We examine a wide parameter space and provide predictions for crater size, ejecta mass, and momentum transfer following the impact into the moon of the Didymos system. For impacts into “realistic” asteroid types, these models produce craters with diameters on the order of 10 m, an imparted Δv of 0.5–2 mm/s and a momentum enhancement of 1.07 to 5 for a highly porous aggregate to a fully dense rock.« less

  2. Graph algorithms in the titan toolkit.

    SciTech Connect (OSTI)

    McLendon, William Clarence, III; Wylie, Brian Neil

    2009-10-01

    Graph algorithms are a key component in a wide variety of intelligence analysis activities. The Graph-Based Informatics for Non-Proliferation and Counter-Terrorism project addresses the critical need of making these graph algorithms accessible to Sandia analysts in a manner that is both intuitive and effective. Specifically we describe the design and implementation of an open source toolkit for doing graph analysis, informatics, and visualization that provides Sandia with novel analysis capability for non-proliferation and counter-terrorism.

  3. Binary Optics Toolkit

    Energy Science and Technology Software Center (OSTI)

    1996-04-02

    This software is a set of tools for the design and analysis of binary optics. It consists of a series of stand-alone programs written in C and some scripts written in an application-specific language interpreted by a CAD program called DW2000. This software can be used to optimize the design and placement of a complex lens array from input to output and produce contours, mask designs, and data exported for diffractive optic analysis.

  4. Toolkit for Installing Solar on K-12 Schools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Toolkit for Installing Solar on K-12 Schools Toolkit for Installing Solar on K-12 Schools Following the release of The Solar Foundation's Brighter Future: A Study on Solar in U.S. Schools under the Solar Outreach Partnership, the organization has been working to help more K-12 public schools go solar through its technical assistance program. As part of this effort, they developed the Toolkit for Installing Solar on K-12 Schools to compile new and existing resources, designed to provide public

  5. Voluntary Initiative: Partnerships Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partnerships Toolkit Voluntary Initiative: Partnerships Toolkit Residential energy efficiency programs are delivered by many different types of organizations and their partners, including utilities, state and local governments, non-profit organizations, and for-profit companies, but no matter which sector delivers the program, the need to work in partnership with different entities can make or break program success. PDF icon Voluntary Initiative: Partnerships Toolkit More Documents &

  6. Workplace Charging Toolkit: Workshop Outreach Presentation Template...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outreach Presentation Template Workplace Charging Toolkit: Workshop Outreach Presentation Template Educate workshop attendees and employers about the benefits of workplace charging...

  7. Sustainable Forest Finance Toolkit | Open Energy Information

    Open Energy Info (EERE)

    "This Toolkit has been developed jointly by PricewaterhouseCoopers (PwC) and the World Business Council for Sustainable Development (WBCSD). It is a globally applicable resource...

  8. WPN 10-3: Procurement Toolkit CD

    Broader source: Energy.gov [DOE]

    To issue the Procurement Toolkit CD to all Grantees, to share with their local agencies, for use in the Weatherization Assistance Program.

  9. Workplace Charging Toolkit: Workshop Speaker Instruction Letter...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workplace Charging Toolkit: Workshop Speaker Instruction Letter Template Inform speakers participating in the employer experience panel about their role in the event. File General ...

  10. Category:LEDS Toolkit | Open Energy Information

    Open Energy Info (EERE)

    meant to support the creation and implementation of a Low Emission Development Strategy. Pages in category "LEDS Toolkit" The following 14 pages are in this category, out of...

  11. TransportToolkit Prototype | Open Energy Information

    Open Energy Info (EERE)

    AgencyCompany Organization: Nick Langle ComplexityEase of Use: Not Available Cost: Free Transport Toolkit Region(s): Asia, Europe, Africa & Middle East, Australia & North...

  12. Livermore Metagenomics Analysis Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-10-01

    LMAT is designed to take as input a collection of raw metagenomic sequencer reads, and search each read against a reference genome database and assign a taxonomic label and confidence value to each read and report a summary of the predicted taxonomic contents of the metagenomic sample.

  13. LEDSGP/Transportation Toolkit/Tools | Open Energy Information

    Open Energy Info (EERE)

    Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Request Assistance Tools for Low Emission Development Strategies in Transportation...

  14. Galvin Electricity Initiative Policy Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Galvin Electricity Initiative Policy Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Galvin Electricity Initiative Policy Toolkit AgencyCompany Organization:...

  15. Technology Cost and Performance Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  16. Transportation Assessment Toolkit/Home | Open Energy Information

    Open Energy Info (EERE)

    Transport Bikes in Spain Toolkit for Low Emissions Development Strategies in Transport Red buses Toolkit for Low Emissions Development Strategies in Transport A Rationale and...

  17. Cyber Security Audit and Attack Detection Toolkit: Bandolier...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 This ...

  18. Climate Change and Clean Energy Project (CEnergy) Toolkit | Open...

    Open Energy Info (EERE)

    Project (CEnergy) Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Climate Change and Clean Energy Project (CEnergy) Toolkit AgencyCompany Organization:...

  19. Renewable Energy and Energy Efficiency Toolkit Website | Open...

    Open Energy Info (EERE)

    Toolkit Website Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy and Energy Efficiency Toolkit Website Focus Area: Renewable Energy Topics: Policy...

  20. LEDSGP/Transportation Toolkit/Contact Us | Open Energy Information

    Open Energy Info (EERE)

    Contact Us < LEDSGP | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Request Assistance Contacts for the LEDS GP...

  1. Monitoring Extreme-scale Lustre Toolkit

    SciTech Connect (OSTI)

    Brim, Michael J; Lothian, Josh

    2015-01-01

    We discuss the design and ongoing development of the Monitoring Extreme-scale Lustre Toolkit (MELT), a unified Lustre performance monitoring and analysis infrastructure that provides continuous, low-overhead summary information on the health and performance of Lustre, as well as on-demand, in-depth problem diagnosis and root-cause analysis. The MELT infrastructure leverages a distributed overlay network to enable monitoring of center-wide Lustre filesystems where clients are located across many network domains. We preview interactive command-line utilities that help administrators and users to observe Lustre performance at various levels of resolution, from individual servers or clients to whole filesystems, including job-level reporting. Finally, we discuss our future plans for automating the root-cause analysis of common Lustre performance problems.

  2. Wind Turbine Wake-Redirection Control at the Fishermen's Atlantic City Windfarm: Preprint

    SciTech Connect (OSTI)

    Churchfield, M.; Fleming, P.; Bulder, B.; White, S.

    2015-05-06

    In this paper, we will present our work towards designing a control strategy to mitigate wind turbine wake effects by redirecting the wakes, specifically applied to the Fishermen’s Atlantic City Windfarm (FACW), proposed for deployment off the shore of Atlantic City, New Jersey. As wind turbines extract energy from the air, they create low-speed wakes that extend behind them. Full wake recovery Full wake recovery to the undisturbed wind speed takes a significant distance. In a wind energy plant the wakes of upstream turbines may travel downstream to the next row of turbines, effectively subjecting them to lower wind speeds, meaning these waked turbines will produce less power.

  3. Python-ARM Radar Toolkit

    Energy Science and Technology Software Center (OSTI)

    2013-03-17

    The Python-ARM Radar Toolkit (Py-ART) is a collection of radar quality control and retrieval codes which all work on two unifying Python objects: the PyRadar and PyGrid objects. By building ingests to several popular radar formats and then abstracting the interface Py-ART greatly simplifies data processing over several other available utilities. In addition Py-ART makes use of Numpy arrays as its primary storage mechanism enabling use of existing and extensive community software tools.

  4. BioenergizeME Infographic Challenge Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Toolkit BioenergizeME Infographic Challenge Toolkit Toolkit for the BioenergizeME Infographic Challenge. PDF icon bioenergizeme_toolkit.pdf More Documents & Publications Webinar: BioenergizeME Office Hours Webinar: Guide to the 2016 BioenergizeME Infographic Challenge BioenergizeME Infographic Challenge Flyer Webinar: BioenergizeME Office Hours Webinar: Biomass Basics

  5. Better Buildings Residential Network Peer Exchange Call Series: Voluntary Initiative on Incentives: Toolkit Training Webinar Call Slides and Discussion Summary, March 26, 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Voluntary Initiative on Incentives: Toolkit Training Webinar Call Slides and Discussion Summary March 26, 2015 Agenda  Call Logistics and Introductions  Opening Poll  Residential Network and Peer Exchange Call Overview  Poll on Incentives Experience  Designing Incentives Toolkit:  Toolkit Overview, Jonathan Cohen, U.S. DOE  Featured Speakers:  Brian Kennedy, Austin Energy  Dana Fischer, Efficiency Maine  Q&A and Discussion  Closing Poll 2 Call Participants

  6. Data Exploration Toolkit for serial diffraction experiments

    Office of Scientific and Technical Information (OSTI)

    ... Clustering was performed using the SciPy Python package (Oliphant, 2007). 2.2. Crystal ... the clustering toolkit from within a Python script within the cctbx.xfel environment. ...

  7. Better Buildings Residential Network Social Media Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media Toolkit BETTER BUILDINGS RESIDENTIAL NETWORK Learn more at betterbuildings.energy.gov/bbrn 1 T his Better Buildings Residential Network toolkit can be used to help residential energy efficiency programs learn to engage potential customers through social media. Social media can build brand awareness concerning home energy upgrades and the entities working on them, which can lead to more energy upgrade projects taking place in the long run. Residential Network members provided input

  8. Voluntary Initiative: Designing Incentives Toolkit | Department...

    Office of Environmental Management (EM)

    & Publications Spotlight on Austin, Texas: Let Your Contractor Be Your Guide for Big Rewards Better Buildings Network View | March 2015 Spotlight on Austin, Texas: Best...

  9. Cyber Security Audit and Attack Detection Toolkit: National SCADA...

    Office of Environmental Management (EM)

    Audit and Attack Detection Toolkit: National SCADA Test Bed May 2008 Cyber Security Audit and Attack Detection Toolkit: National SCADA Test Bed May 2008 This project of the cyber ...

  10. NYSERDA-Wind Energy Toolkit | Open Energy Information

    Open Energy Info (EERE)

    NYSERDA-Wind Energy Toolkit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: NYSERDA-Wind Energy Toolkit AgencyCompany Organization: New York State Energy Research and...

  11. NOAA Webinar: The U.S. Climate Resilience Toolkit

    Broader source: Energy.gov [DOE]

    Hosted by the National Oceanic and Atmospheric Administration (NOAA), this webinar will demonstrate the U.S. Climate Resilience Toolkit.

  12. ORISE: Radiological Terrorism Toolkit | How ORISE is Making a Difference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Radiological Terrorism Toolkit ORISE partners with CDC to develop Radiological Terrorism: A Toolkit for Public Health Officials Radiological Terrorism: A Toolkit for Public Health Officials How ORISE is Making a Difference Working closely with the Centers for Disease Control and Prevention (CDC), the Oak Ridge Institute for Science and Education (ORISE) distributed more than 400 radiological terrorism toolkits filled with key resources, such as training guidelines, clinical directives, details

  13. TECA: A Parallel Toolkit for Extreme Climate Analysis

    SciTech Connect (OSTI)

    Prabhat, Mr; Ruebel, Oliver; Byna, Surendra; Wu, Kesheng; Li, Fuyu; Wehner, Michael; Bethel, E. Wes

    2012-03-12

    We present TECA, a parallel toolkit for detecting extreme events in large climate datasets. Modern climate datasets expose parallelism across a number of dimensions: spatial locations, timesteps and ensemble members. We design TECA to exploit these modes of parallelism and demonstrate a prototype implementation for detecting and tracking three classes of extreme events: tropical cyclones, extra-tropical cyclones and atmospheric rivers. We process a modern TB-sized CAM5 simulation dataset with TECA, and demonstrate good runtime performance for the three case studies.

  14. Workplace Charging Toolkit: Outreach Letter Template | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Reach out to employers in your community who may be interested in offering workplace charging with this template. File General Outreach Letter Template File Clean Cities Branded Outreach Letter Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Workshop Host Outreach Letter Template Workplace Charging Toolkit: Workshop Speaker Instruction

  15. Workplace Charging Toolkit: Press Release Template | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Raise the profile of employers in the community who are offering workplace charging and encourage the adoption of workplace charging among other employers through this press release template. File General Press Release Template File Clean Cities Branded Press Release Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Outreach Letter Template Workplace Charging Toolkit: Workshop Host Outreach

  16. Workplace Charging Toolkit: Workshop Host Outreach Letter Template |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Approach employers in your community that already have workplace charging to serve as a workshop host. File General Host Outreach Letter Template File Clean Cities Branded Host Outreach Letter Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Workshop Invitation Template Workplace Charging Toolkit: Workshop Speaker Instruction

  17. Workplace Charging Toolkit: Workshop Invitation Template | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy Engage possible workplace charging event attendees with this template invitation. File General Workshop Invitation Template File Clean Cities Branded Workshop Invitation Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Workshop Agenda Template Workplace Charging Toolkit: Workshop Host Outreach

  18. SIERRA Toolkit v. 1.0

    Energy Science and Technology Software Center (OSTI)

    2010-02-24

    The SIERRA Toolkit is a collection of libraries to facilitate the development of parallel engineering analysis applications. These libraries supply basic core services that an engineering analysis application may need such as a parallel distributed and dynamic mesh database (for unstructured meshes), mechanics algorithm support (parallel infrastructure only), interfaces to parallel solvers, parallel mesh and data I/O, and various utilities (timers, diagnostic tools, etc.).The toolkit is intended to reduce the effort required to develop anmore » engineering analysis application by removing the need to develop core capabilities that most every application would require.« less

  19. 2030 District Program and Small Commercial Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2030 District Program and Small Commercial Toolkit 2014 Building Technologies Office Peer Review Cindy Regnier, CMRegnier@lbl.gov Lawrence Berkeley National Lab Project Summary (New Project) Timeline: Start date: October 1, 2013 Planned end date: March 30, 2016 Key Milestones 1. Develop program resources and tools, 9/30/14 2. Complete demonstrations, 9/30/15 3. Deployment to other 2030 Districts, 3/30/16 Budget: Total DOE $ to date: $2M (for program and toolkit, no dollars are applied to

  20. Portable Extensible Toolkit for Scientific Computation

    Energy Science and Technology Software Center (OSTI)

    1995-06-30

    PETSC2.0 is a software toolkit for portable, parallel (and serial) numerical solution of partial differential equations and minimization problems. It includes software for the solution of linear and nonlinear systems of equations. These codes are written in a data-structure-neutral manner to enable easy reuse and flexibility.

  1. Designing Renewable Energy Financing Mechanism Terms of Reference...

    Open Energy Info (EERE)

    Designing Renewable Energy Financing Mechanism Terms of Reference (Redirected from Designing Renewable Energy Financing Mechanisms) Jump to: navigation, search Tool Summary LAUNCH...

  2. V-234: EMC RSA Archer GRC Open Redirection Weakness and Security...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-234: EMC RSA Archer GRC Open Redirection Weakness and Security Bypass Security Issue ... Vendor recommends updating to version 5.4 Addthis Related Articles V-084: RSA Archer eGRC ...

  3. BioenergizeME Virtual Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... students in designing their own. * POET-DSM: Project LIBERTY * Abengoa Biorefinery * ... IMAGE RESOURCES 10 DOEEE-1139 | published 92215 11 APPENDIX A GOAL: SOCIAL MEDIA ...

  4. V-234: EMC RSA Archer GRC Open Redirection Weakness and Security Bypass

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Security Issue | Department of Energy 4: EMC RSA Archer GRC Open Redirection Weakness and Security Bypass Security Issue V-234: EMC RSA Archer GRC Open Redirection Weakness and Security Bypass Security Issue September 4, 2013 - 6:00am Addthis PROBLEM: A weakness and a security issue have been reported in EMC RSA Archer GRC PLATFORM: EMC RSA Archer GRC 5.x ABSTRACT: This fixes multiple vulnerabilities, which can be exploited to bypass certain security restrictions and to conduct spoofing

  5. Knowledge information management toolkit and method

    DOE Patents [OSTI]

    Hempstead, Antoinette R.; Brown, Kenneth L.

    2006-08-15

    A system is provided for managing user entry and/or modification of knowledge information into a knowledge base file having an integrator support component and a data source access support component. The system includes processing circuitry, memory, a user interface, and a knowledge base toolkit. The memory communicates with the processing circuitry and is configured to store at least one knowledge base. The user interface communicates with the processing circuitry and is configured for user entry and/or modification of knowledge pieces within a knowledge base. The knowledge base toolkit is configured for converting knowledge in at least one knowledge base from a first knowledge base form into a second knowledge base form. A method is also provided.

  6. A toolkit for detecting technical surprise.

    SciTech Connect (OSTI)

    Trahan, Michael Wayne; Foehse, Mark C.

    2010-10-01

    The detection of a scientific or technological surprise within a secretive country or institute is very difficult. The ability to detect such surprises would allow analysts to identify the capabilities that could be a military or economic threat to national security. Sandia's current approach utilizing ThreatView has been successful in revealing potential technological surprises. However, as data sets become larger, it becomes critical to use algorithms as filters along with the visualization environments. Our two-year LDRD had two primary goals. First, we developed a tool, a Self-Organizing Map (SOM), to extend ThreatView and improve our understanding of the issues involved in working with textual data sets. Second, we developed a toolkit for detecting indicators of technical surprise in textual data sets. Our toolkit has been successfully used to perform technology assessments for the Science & Technology Intelligence (S&TI) program.

  7. Voluntary Initiative on Incentives: Toolkit Training Webinar | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Initiative on Incentives: Toolkit Training Webinar Voluntary Initiative on Incentives: Toolkit Training Webinar Better Buildings Residential Network Peer Exchange Call Series: Voluntary Initiative on Incentives: Toolkit Training Webinar, Call Slides and Discussion Summary, March 26, 2015. PDF icon Call Slides and Discussion Summary More Documents & Publications Generating Energy Efficiency Project Leads and Allocating Leads to Contractors Making Evaluations Work for Your

  8. LBNL: Architecture 2030 District Program and Small Commercial Toolkit |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy LBNL: Architecture 2030 District Program and Small Commercial Toolkit LBNL: Architecture 2030 District Program and Small Commercial Toolkit LBNL: Architecture 2030 District Program and Small Commercial Toolkit Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA Partners: - Architecture 2030 - Santa Fe, NM - Cleveland 2030 District - Cleveland, OH - Green Building Alliance/Pittsburgh 2030 District - Pittsburgh, PA - Seattle 2030 District - Seattle, WA -

  9. Supply Chain Risk Management (SCRM) Awareness Toolkit | Department of

    Energy Savers [EERE]

    Energy Supply Chain Risk Management (SCRM) Awareness Toolkit Supply Chain Risk Management (SCRM) Awareness Toolkit The Office of the Chief Information Officer (OCIO) Supply Chain Risk Management (SCRM) Resource Center developed the SCRM Awareness Toolkit to introduce DOE employees to the basic terms and concepts of the technology supply chain and associated threats. For additional information on the DOE Enterprise SCRM Resource Center and program initiatives, please contact Sue Farrand at

  10. Online Toolkit Fosters Bioenergy Innovation | Department of Energy

    Energy Savers [EERE]

    Online Toolkit Fosters Bioenergy Innovation Online Toolkit Fosters Bioenergy Innovation January 21, 2011 - 2:27pm Addthis Learn more about the Bioenergy Knowledge Discovery Framework, an online data sharing and mapping toolkit. Paul Bryan Biomass Program Manager, Office of Energy Efficiency & Renewable Energy What will the project do? The $241 million loan guarantee for Diamond Green Diesel, funding which will support the construction of a facility that will nearly triple the amount of

  11. LBNL: Architecture 2030 District Program and Small Commercial Toolkit |

    Energy Savers [EERE]

    Department of Energy LBNL: Architecture 2030 District Program and Small Commercial Toolkit LBNL: Architecture 2030 District Program and Small Commercial Toolkit LBNL: Architecture 2030 District Program and Small Commercial Toolkit Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA Partners: - Architecture 2030 - Santa Fe, NM - Cleveland 2030 District - Cleveland, OH - Green Building Alliance/Pittsburgh 2030 District - Pittsburgh, PA - Seattle 2030 District - Seattle, WA -

  12. Cyber Security Audit and Attack Detection Toolkit: Bandolier and

    Office of Environmental Management (EM)

    Portaledge, March 2010 | Department of Energy Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 Cyber Security Audit and Attack Detection Toolkit: Bandolier and Portaledge, March 2010 This project of the cyber security audit and attack detection toolkit will employ Bandolier Audit Files for optimizing security configurations and the Portaledge event detection capability for energy control systems. By building configuration audit and attack detection

  13. Grid-Connected Renewable Energy Generation Toolkit-Biomass |...

    Open Energy Info (EERE)

    Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Grid-Connected Renewable Energy Generation Toolkit-Biomass AgencyCompany Organization: United States Agency for...

  14. Distributed Renewable Energy Finance and Policy Toolkit | Open...

    Open Energy Info (EERE)

    Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Distributed Renewable Energy Finance and Policy Toolkit AgencyCompany Organization: Clean Energy States Alliance...

  15. Regulatory and Permitting Information Desktop Toolkit (Fact Sheet)

    SciTech Connect (OSTI)

    Young, K.

    2014-04-01

    Overview of DOE's Regulatory and Permitting Information Desktop (RAPID) Toolkit project, providing information on where to go to view documents and who to contact to get involved.

  16. LEDSGP/DIA-Toolkit/Request Assistance | Open Energy Information

    Open Energy Info (EERE)

    Impacts Assessment Toolkit Home Tools Request Assistance Remote Expert Assistance on LEDS The Low Emission Development Strategies (LEDS) Global Partnership provides timely,...

  17. Workplace Charging Toolkit: Workshop Host Outreach Letter Template...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Host Outreach Letter Template Workplace Charging Toolkit: Workshop Host Outreach Letter Template Approach employers in your community that already have workplace charging to serve ...

  18. Category:Wind Working Group Toolkit | Open Energy Information

    Open Energy Info (EERE)

    search This wiki-based Wind Working Group Toolkit provides links to information, methods, and resources. This wiki is a work in progress, and we welcome your contributions....

  19. ORISE: Radiological Terrorism Toolkit | How ORISE is Making a...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Education (ORISE) distributed more than 400 radiological terrorism toolkits filled with key resources, such as training guidelines, clinical directives, details about radioactive...

  20. LEDSGP/DIA-Toolkit/Uses | Open Energy Information

    Open Energy Info (EERE)

    (DIA) Toolkit offers a structured way to consider the impact of proposed low emission development strategies (LEDS) on other national or local priorities, and provides links to...

  1. The structural simulation toolkit :a tool for exploring parallel...

    Office of Scientific and Technical Information (OSTI)

    for exploring parallel architectures and applications. Citation Details In-Document Search Title: The structural simulation toolkit :a tool for exploring parallel architectures ...

  2. Integrated: Geospatial Toolkit GIS data for Nicaragua from NREL...

    Open Energy Info (EERE)

    Nicaragua from NREL (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy...

  3. Integrated: Geospatial Toolkit GIS data for Cuba from NREL -...

    Open Energy Info (EERE)

    Cuba from NREL (Abstract): Geographic Information Systems (GIS) data intended for use in the Geospatial toolkit or with any GIS software. (Purpose): The Solar and Wind Energy...

  4. Integrated: Geospatial Toolkit GIS data for Oaxaca from NREL...

    Open Energy Info (EERE)

    show good potential for renewable energy projects. The toolkit displays renewable energy data along with information about the geography, location of population centers,...

  5. Integrated: Geospatial Toolkit GIS data for India from NREL ...

    Open Energy Info (EERE)

    show good potential for renewable energy projects. The toolkit displays renewable energy data along with information about the geography, location of population centers,...

  6. ORISE: Pandemic Flu Toolkits | How ORISE is Making a Difference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    workshops that have been presented to the Asia-Pacific Economic Cooperation (APEC) and other nations around the world. By developing training toolkits and providing...

  7. ACHP - Section 106 Applicant Toolkit | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ACHP - Section 106 Applicant ToolkitPermittingRegulatory GuidanceGuide...

  8. Geospatial Toolkit (GsT) Webinar | Open Energy Information

    Open Energy Info (EERE)

    wikiGsT Equivalent URI: cleanenergysolutions.orgcontentgeospatial-toolkit-gst Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance...

  9. WRI-The Governance of Forests Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Publications Website: pdf.wri.orgworkingpapersgfitenureindicatorssep09.pdf Cost: Free WRI-The Governance of Forests Toolkit Screenshot References: WRI-The Governance of...

  10. Advanced Network Toolkit for Assessments and Remote Mapping ...

    Broader source: Energy.gov (indexed) [DOE]

    Uses existing information to passively map control systems networks and identify cyber security perimeters Advanced Network Toolkit for Assessments and Remote Mapping (ANTFARM)...

  11. Quarterly Cybersecurity Awareness Campaigns and Toolkits | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Quarterly Cybersecurity Awareness Campaigns and Toolkits Quarterly Cybersecurity Awareness Campaigns and Toolkits The OCIO coordinates quarterly cybersecurity awareness campaigns and Federal awareness programs to provide DOE employees with timely information on current cyber threats, recommended mitigations, and sound practices. Documents Available for Download April 6, 2015 January 2015 Cybersecurity Awareness Campaign - Phishing April 6, 2015 July 2014 Cybersecurity Awareness

  12. Workplace Charging Toolkit: Workshop Agenda Template | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Develop a streamlined workshop with this half-day agenda focused on introductory-level PEV education and firsthand employer workplace charging experience. File General Workshop Agenda Template File Clean Cities Branded Workshop Agenda Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Instruction Letter Template Workplace Charging Challenge Summit 2014: Session 1, Track A Workplace Charging Toolkit: Workshop Invitation

  13. Workplace Charging Toolkit: Workshop Speaker Instruction Letter Template |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Inform speakers participating in the employer experience panel about their role in the event. File General Speaker Instruction Letter Template File Clean Cities Branded Speaker Instruction Letter Template More Documents & Publications Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template Workplace Charging Toolkit: Workshop Host Outreach

  14. Workplace Charging Toolkit: Workshop Speaker Outreach Letter Template |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Invite employers in your community that already have charging to speak on an employer experience panel. File General Speaker Outreach Letter Template File Clean Cities Branded Speaker Outreach Letter Template More Documents & Publications Workplace Charging Toolkit: Workshop Host Outreach Letter Template Workplace Charging Toolkit: Workshop Speaker Instruction

  15. An Incident Management Preparedness and Coordination Toolkit

    SciTech Connect (OSTI)

    Koch, Daniel B; Payne, Patricia W

    2012-01-01

    Although the use of Geographic Information Systems (GIS) by centrally-located operations staff is well established in the area of emergency response, utilization by first responders in the field is uneven. Cost, complexity, and connectivity are often the deciding factors preventing wider adoption. For the past several years, Oak Ridge National Laboratory (ORNL) has been developing a mobile GIS solution using free and open-source software targeting the needs of front-line personnel. Termed IMPACT, for Incident Management Preparedness and Coordination Toolkit, this ORNL application can complement existing GIS infrastructure and extend its power and capabilities to responders first on the scene of a natural or man-made disaster.

  16. 2030 District Program and Small Commercial Toolkit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cindy Regnier, CMRegnier@lbl.gov Lawrence Berkeley National Lab Vincent Martinez, martinez@architecture2030.org Architecture 2030 2030 District Program and Small Commercial Toolkit 2015 Building Technologies Office Peer Review 2 Project Summary Timeline: Start date: October 1, 2013 Planned end date: March 30, 2016 Key Milestones 1. Develop program resources and tools, 9/30/14 2. Complete demonstrations, 9/30/15 3. Deployment to other 2030 Districts, 3/30/16 Budget: Total DOE $ to date: $2M (for

  17. MCS Large Cluster Systems Software Toolkit

    Energy Science and Technology Software Center (OSTI)

    2002-11-01

    This package contains a number of systems utilities for managing a set of computers joined in a "cluster". The utilities assist a team of systems administrators in managing the cluster by automating routine tasks, centralizing information, and monitoring individual computers within the cluster. Included in the toolkit are scripts used to boot a computer from a floppy, a program to turn on and off the power to a system, and a system for using amore »database to organize cluster information.« less

  18. Parallel Climate Analysis Toolkit (ParCAT)

    Energy Science and Technology Software Center (OSTI)

    2013-06-30

    The parallel analysis toolkit (ParCAT) provides parallel statistical processing of large climate model simulation datasets. ParCAT provides parallel point-wise average calculations, frequency distributions, sum/differences of two datasets, and difference-of-average and average-of-difference for two datasets for arbitrary subsets of simulation time. ParCAT is a command-line utility that can be easily integrated in scripts or embedded in other application. ParCAT supports CMIP5 post-processed datasets as well as non-CMIP5 post-processed datasets. ParCAT reads and writes standard netCDF files.

  19. Pointright: a system to redirect mouse and keyboard control among multiple machines

    DOE Patents [OSTI]

    Johanson, Bradley E.; Winograd, Terry A.; Hutchins, Gregory M.

    2008-09-30

    The present invention provides a software system, PointRight, that allows for smooth and effortless control of pointing and input devices among multiple displays. With PointRight, a single free-floating mouse and keyboard can be used to control multiple screens. When the cursor reaches the edge of a screen it seamlessly moves to the adjacent screen and keyboard control is simultaneously redirected to the appropriate machine. Laptops may also redirect their keyboard and pointing device, and multiple pointers are supported simultaneously. The system automatically reconfigures itself as displays go on, go off, or change the machine they display.

  20. WAP Memorandum 015: Weatherization Financial Toolkit – 2 CFR 200 Regulations and Procurement Procedures

    Broader source: Energy.gov [DOE]

    This Memorandum serves to update and supersede the Financial Toolkit, previously issued in Weatherization Program Notice (WPN) 12-4, Weatherization Assistance Program Financial Management Training Toolkit dated December 9, 2011, and the Procurement Toolkit previously issued in WPN 10-3, Procurement Toolkit CD, dated October 30, 2009.

  1. Data Exploration Toolkit for serial diffraction experiments

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zeldin, Oliver B.; Brewster, Aaron S.; Hattne, Johan; Uervirojnangkoorn, Monarin; Lyubimov, Artem Y.; Zhou, Qiangjun; Zhao, Minglei; Weis, William I.; Sauter, Nicholas K.; Brunger, Axel T.

    2015-01-23

    Ultrafast diffraction at X-ray free-electron lasers (XFELs) has the potential to yield new insights into important biological systems that produce radiation-sensitive crystals. An unavoidable feature of the 'diffraction before destruction' nature of these experiments is that images are obtained from many distinct crystals and/or different regions of the same crystal. Combined with other sources of XFEL shot-to-shot variation, this introduces significant heterogeneity into the diffraction data, complicating processing and interpretation. To enable researchers to get the most from their collected data, a toolkit is presented that provides insights into the quality of, and the variation present in, serial crystallography datamore » sets. These tools operate on the unmerged, partial intensity integration results from many individual crystals, and can be used on two levels: firstly to guide the experimental strategy during data collection, and secondly to help users make informed choices during data processing.« less

  2. Solar for Safety, Security, and Resilience Toolkit

    Broader source: Energy.gov [DOE]

    There is a growing interest in using renewable energy options like solar to improve community resiliency. During extreme weather events, solar can help prevent power outages by providing emergency energy to critical facilities and recovery efforts. Solar can provide electricity to remote or less accessible areas, and is flexible enough to be a mobile or temporary power source. In addition to resiliency planning, there are efforts to promote new safety education and guidelines for solar installation, especially related to fire prevention. Also, there is rising interest in how solar can influence homeland security. The Solar for Safety, Security, and Resilience Toolkit demonstrates the different ways of thinking about and incorporating solar energy into ongoing public safety, homeland security, and resiliency initiatives.

  3. Simple modification of Compton polarimeter to redirect synchrotron radiation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Benesch, Jay F.; Franklin, Gregg B.; Quinn, Brian P.; Paschke, Kent D.

    2015-11-30

    Synchrotron radiation produced as an electron beam passes through a bending magnet is a significant source of background in many experiments. Using modeling, we show that simple modifications of the magnet geometry can reduce this background by orders of magnitude in some circumstances. Specifically, we examine possible modifications of the four dipole magnets used in Jefferson Labs Hall A Compton polarimeter chicane. This Compton polarimeter has been a crucial part of experiments with polarized beams and the next generation of experiments will utilize increased beam energies, up to 11 GeV, requiring a corresponding increase in Compton dipole field to 1.5moreT. In consequence, the synchrotron radiation (SR) from the dipole chicane will be greatly increased. Three possible modifications of the chicane dipoles are studied; each design moves about 2% of the integrated bending field to provide a gentle bend in critical regions along the beam trajectory which, in turn, greatly reduces the synchrotron radiation within the acceptance of the Compton polarimeter photon detector. Each of the modifications studied also softens the SR energy spectrum at the detector sufficiently to allow shielding with 5 mm of lead. Simulations show that these designs are each capable of reducing the background signal due to SR by three orders of magnitude. The three designs considered vary in their need for vacuum vessel changes and in their effectiveness.less

  4. Integrated: Geospatial Toolkit for Honduras from NREL - Datasets...

    Open Energy Info (EERE)

    and easy to use geographic toolkit that allows non-GIS users to relate the renewable energy resource (solar and wind) data to other geographic data, such as land use, protected...

  5. Template:RegulatoryToolkitHeader | Open Energy Information

    Open Energy Info (EERE)

    Toolkit banner, typically across the top of the page, which features a unique blue color scheme and simple menu. Parameters none Usage It should be called in the following...

  6. On-Bill Financing for Energy Efficiency Improvements Toolkit | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Improvements Toolkit On-Bill Financing for Energy Efficiency Improvements Toolkit Provides some benefits and barriers to on-bill programs. Author: American Counsel for Energy-Efficient Economy On-Bill Financing for Energy Efficiency Improvements More Documents & Publications Financing Energy Upgrades for K-12 School Districts On-Bill Financing for Energy Efficiency Improvements: A Review of Current Program Challenges, Opportunities, and Best Practices Reduce Risk, Increase

  7. Data Exploration Toolkit for serial diffraction experiments (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Data Exploration Toolkit for serial diffraction experiments Citation Details In-Document Search Title: Data Exploration Toolkit for serial diffraction experiments Ultrafast diffraction at X-ray free-electron lasers (XFELs) has the potential to yield new insights into important biological systems that produce radiation-sensitive crystals. An unavoidable feature of the 'diffraction before destruction' nature of these experiments is that images are obtained from many

  8. The structural simulation toolkit : a tool for bridging the

    Office of Scientific and Technical Information (OSTI)

    architectural/microarchitectural evaluation gap. (Conference) | SciTech Connect The structural simulation toolkit : a tool for bridging the architectural/microarchitectural evaluation gap. Citation Details In-Document Search Title: The structural simulation toolkit : a tool for bridging the architectural/microarchitectural evaluation gap. Abstract not provided. Authors: Murphy, Richard. ; Rodrigues, Arun F. ; Kogge, Peter [1] ; Underwood, Keith Douglas + Show Author Affiliations University

  9. The structural simulation toolkit :a tool for exploring parallel

    Office of Scientific and Technical Information (OSTI)

    architectures and applications. (Conference) | SciTech Connect structural simulation toolkit :a tool for exploring parallel architectures and applications. Citation Details In-Document Search Title: The structural simulation toolkit :a tool for exploring parallel architectures and applications. No abstract prepared. Authors: Kogge, Peter [1] ; Murphy, Richard C. ; Rodrigues, Arun F. ; Underwood, Keith Douglas + Show Author Affiliations (Univeristy of Notre Dame, Notre Dame, IN) Publication

  10. Performance Based Service Acquisition Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procurement and Acquisition » Guidance » Contracting for Support Services » Performance Based Service Acquisition Toolkit Performance Based Service Acquisition Toolkit Performance-based Service Acquisition (PBA) means an acquisition structured around the results to be achieved as opposed to the manner by which the work is to be performed. Performance-based Work Statement (PWS) means that a statement of work for performance-based acquisitions that describes the required results in clear,

  11. The NetLogger Toolkit V2.0

    Energy Science and Technology Software Center (OSTI)

    2003-03-28

    The NetLogger Toolkit is designed to monitor, under actual operating conditions, the behavior of all the elements of the application-to-application communication path in order to determine exactly where time is spent within a complex system Using NetLogger, distnbuted application components are modified to produce timestamped logs of "interesting" events at all the critical points of the distributed system Events from each component are correlated, which allov^ one to characterize the performance of all aspects ofmore » the system and network in detail. The NetLogger Toolkit itself consists of four components an API and library of functions to simplify the generation of application-level event logs, a set of tools for collecting and sorting log files, an event archive system, and a tool for visualization and analysis of the log files In order to instrument an application to produce event logs, the application developer inserts calls to the NetLogger API at all the critical points in the code, then links the application with the NetLogger library All the tools in the NetLogger Toolkit share a common log format, and assume the existence of accurate and synchronized system clocks NetLogger messages can be logged using an easy-to-read text based format based on the lETF-proposed ULM format, or a binary format that can still be used through the same API but that is several times faster and smaller, with performance comparable or better than binary message formats such as MPI, XDR, SDDF-Binary, and PBIO. The NetLogger binary format is both highly efficient and self-describing, thus optimized for the dynamic message construction and parsing of application instrumentation. NetLogger includes an "activation" API that allows NetLogger logging to be turned on, off, or modified by changing an external file This IS useful for activating logging in daemons/services (e g GndFTP server). The NetLogger reliability API provides the ability to specify backup logging locations and penodically try to reconnect broken TCP pipe. A typical use for this is to store data on local disk while net is down. An event archiver can log one or more incoming NetLogger streams to a local disk file (netlogd) or to a mySQL database (netarchd). We have found exploratory, visual analysis of the log event data to be the most useful means of determining the causes of performance anomalies The NetLogger Visualization tool, niv, has been developed to provide a flexible and interactive graphical representation of system-level and application-level events.« less

  12. UQ Toolkit v 2.0

    Energy Science and Technology Software Center (OSTI)

    2013-10-03

    The Uncertainty Quantification (UQ) Toolkit is a software library for the characterizaton and propagation of uncertainties in computational models. For the characterization of uncertainties, Bayesian inference tools are provided to infer uncertain model parameters, as well as Bayesian compressive sensing methods for discovering sparse representations of high-dimensional input-output response surfaces, and also Karhunen-Loève expansions for representing stochastic processes. Uncertain parameters are treated as random variables and represented with Polynomial Chaos expansions (PCEs). The library implementsmore » several spectral basis function types (e.g. Hermite basis functions in terms of Gaussian random variables or Legendre basis functions in terms of uniform random variables) that can be used to represent random variables with PCEs. For propagation of uncertainty, tools are provided to propagate PCEs that describe the input uncertainty through the computational model using either intrusive methods (Galerkin projection of equations onto basis functions) or non-intrusive methods (perform deterministic operation at sampled values of the random values and project the obtained results onto basis functions).« less

  13. The Configuration Space Toolkit (C-Space Toolkit or CSTK) Ver. 2.5 beta

    Energy Science and Technology Software Center (OSTI)

    2010-02-24

    The C-Space Toolkit provides a software library that makes it easier to program motion planning, simulation, robotics, and virtual reality codes using the Configuration Space abstraction. Key functionality (1) enables the user to special create representations of movable and stationary rigid geometric objects, and (2) perform fast distance, interference (clash) detection, collision detection, closest-feature pairs, and contact queries in terms of object configuration. Not only can queries be computed at any given point in configurationmore » space, but they can be done exactly over linear-translational path segments and approximately for rotational path segments. Interference detection and distance computations can be done with respect to the Minkowski sum of the original geometry and a piece of convex geometry. The Toolkit takes as raw model input (1) collections of convex polygons that form the boundaries of models and (2) convex polyhedra, cones, cylinders, and discs that are models and model components. Configurations are given in terms of homogeneous transforms. A simple OpenGL-based system for displaying and animating the geometric objects is included in the implementation. This version, 2.5 Beta, incorporates feature additions and enhancements, improvements in algorithms, improved robustness, bug fixes and cleaned-up source code, better compliance with standards and recent programming convention, changes to the build process for the software, support for more recent hardware and software platforms, and improvements to documentation and source-code comments.« less

  14. U-074: Microsoft.NET Bugs Let Remote Users Execute Arbitrary Commands, Access User Accounts, and Redirect Users

    Broader source: Energy.gov [DOE]

    A remote user can execute arbitrary commands on the target system. A remote user can access a target user's account. A remote user can redirect users to arbitrary sites.

  15. Validation of Power Output for the WIND Toolkit

    SciTech Connect (OSTI)

    King, J.; Clifton, A.; Hodge, B. M.

    2014-09-01

    Renewable energy integration studies require wind data sets of high quality with realistic representations of the variability, ramping characteristics, and forecast performance for current wind power plants. The Wind Integration National Data Set (WIND) Toolkit is meant to be an update for and expansion of the original data sets created for the weather years from 2004 through 2006 during the Western Wind and Solar Integration Study and the Eastern Wind Integration Study. The WIND Toolkit expands these data sets to include the entire continental United States, increasing the total number of sites represented, and it includes the weather years from 2007 through 2012. In addition, the WIND Toolkit has a finer resolution for both the temporal and geographic dimensions. Three separate data sets will be created: a meteorological data set, a wind power data set, and a forecast data set. This report describes the validation of the wind power data set.

  16. COLLOQUIUM: Dawn, the Asteroid Redirect Mission, and the Future of Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electric Propulsion | Princeton Plasma Physics Lab April 9, 2015, 2:00pm to 3:30pm Colloquia MBG Auditorium COLLOQUIUM: Dawn, the Asteroid Redirect Mission, and the Future of Solar Electric Propulsion Dr. John Brophy NASA Jet Propulsion Laboratory Abstract: PDF icon COLL.04.09.14.pdf The ongoing Dawn mission has as its goal the exploration of the two most massive main-belt asteroids, 4 Vesta and 1 Ceres. This mission is enabled by an on-board, solar powered, ion propulsion system that will

  17. Incident Management Preparedness and Coordination Toolkit

    Energy Science and Technology Software Center (OSTI)

    2013-04-01

    As with many professions, safety planners and first responders tend to be specialists in certain areas. To be truly useful, tools should be tailored to meet their specific needs. Thus, general software suites aimed at the professional geographic information system (GIS) community might not be the best solution for a first responder with little training in GIS terminology and techniques. On the other hand, commonly used web-based map viewers may not have the capability tomore » be customized for the planning, response, and recovery (PR&R) mission. Data formats should be open and foster easy information flow among local, state, and federal partners. Tools should be free or low-cost to address real-world budget constraints at the local level. They also need to work both with and without a network connection to be robust. The Incident Management Preparedness and Coordination Toolkit (IMPACT) can satisfy many of these needs while working in harmony with established systems at the local, state, and federal levels. The IMPACT software framework, termed the Geospatial Integrated Problem Solving Environment (GIPSE), organizes tasks, tools, and resources for the end user. It uses the concept of software wizards to both customize and extend its functionality. On the Tasks panel are a number of buttons used to initiate various operations. Similar to macros, these task buttons launch scripts that utilize the full functionality of the underlying foundational components such as the SQL spatial database and ORNL-developed map editor. The user is presented with a series of instruction pages which are implemented with HTML for interactivity. On each page are links which initiate specific actions such as creating a map showing various features. Additional tasks may be quickly programmed and added to the panel. The end user can customize the graphical interface to faciltate its use during an emergency. One of the major components of IMPACT is the ORNL Geospatial Viewer (OGV). It is used to provide various map displays for the Tasks and Maps panels. Unlike typical maps however, the OGV display is highly interactive and can be customized, automated, and animated to meet the needs of the user. It is also a means to both import and export geospatial data from or to existing GIS systems. The built-in simulation capability can be used as the basis of table-top exercises.« less

  18. Geospatial Toolkits and Resource Maps for Selected Countries from the National Renewable Energy Laboratory (NREL)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    NREL developed the Geospatial Toolkit (GsT), a map-based software application that integrates resource data and geographic information systems (GIS) for integrated resource assessment. A variety of agencies within countries, along with global datasets, provided country-specific data. Originally developed in 2005, the Geospatial Toolkit was completely redesigned and re-released in November 2010 to provide a more modern, easier-to-use interface with considerably faster analytical querying capabilities. Toolkits are available for 21 countries and each one can be downloaded separately. The source code for the toolkit is also available. [Taken and edited from http://www.nrel.gov/international/geospatial_toolkits.html

  19. Capturing and Using Knowledge about the Use of Visualization Toolkits

    SciTech Connect (OSTI)

    Del Rio, Nicholas R.; Pinheiro da Silva, Paulo

    2012-11-02

    When constructing visualization pipelines using toolkits such as Visualization Toolkit (VTK) and Generic Mapping Tools (GMT), developers must understand (1) what toolkit operators will transform their data from its raw state to some required view state and (2) what viewers are available to present the generated view. Traditionally, developers learn about how to construct visualization pipelines by reading documentation and inspecting code examples, which can be costly in terms of the time and effort expended. Once an initial pipeline is constructed, developers may still have to undergo a trial and error process before a satisfactory visualization is generated. This paper presents the Visualization Knowledge Project (VisKo) that is built on a knowledge base of visualization toolkit operators and how they can be piped together to form visualization pipelines. Developers may now rely on VisKo to guide them when constructing visualization pipelines and in some cases, when VisKo has complete knowledge about some set of operators (i.e., sequencing and parameter settings), automatically generate a fully functional visualization pipeline.

  20. Workplace Charging Toolkit: Example Events | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Example Events Workplace Charging Toolkit: Example Events This section provides links to previous successful workplace charging events. These link directly to the organization's website and contain event agendas and presentation materials. Workplace Charging for Electric Vehicles - Chicago Area Clean Cities Workplace Charging: Employer Policy and Cost Considerations - Chicago Area Clean Cities Drive Electric Northern Colorado Workplace Charging Challenge Launch - Northern Colorado Clean Cities

  1. Cubit Mesh Generation Toolkit V11.1

    Energy Science and Technology Software Center (OSTI)

    2009-03-25

    CUBIT prepares models to be used in computer-based simulation of real-world events. CUBIT is a full-featured software toolkit for robust generation of two- and three-dimensional finite element meshes (grids) and geometry preparation. Its main goal is to reduce the time to generate meshes, particularly large hex meshes of complicated, interlocking assemblies.

  2. Project Screening and Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  3. Policy and Program Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    of Diesel Buses to Compressed Natural Gas How to implement renewable energy and energy efficiency options Support for South African local government Hydrogen Analysis (H2A)...

  4. Redirection of the spherical expanding shock wave on the interface with plasma

    SciTech Connect (OSTI)

    Markhotok, A.; Popovic, S.

    2014-02-15

    We study a strong spherical expanding shock wave interacting with the finite-gradient interface between neutral cold gas and weakly ionized plasma. We want to see how the interaction with the interface can alter the shock structure compared to the case of its free propagation through the media with the exponentially varying density. From our comparative calculations based on the 2D model, we found substantial difference in the shock structure including strong deformation of the shock front followed with its gradual flattening and the redirection in its propagation. There are a number of factors that can be used to control this phenomenon in order to strengthen or lessen the effect. The calculations can be made on any scale, limited with the requirement for the shock wave to be strong. The study points at the possibility in certain applications to avoid the shock wave with its redirection rather than attenuation. The results can be applicable to optimization of the energy deposition into the supersonic flux, the drag reduction in hypersonic flight, in the detonation theory, and combustion through the control of the ignition conditions, and for environmental improvements through sonic boom reduction. Cartesian coordinates were used in order to visualize the phenomenon.

  5. Conformance Tool High Level Design Document: IEC 61850 Cyber Security Acceleration Project

    SciTech Connect (OSTI)

    Edgar, Thomas W.

    2013-05-01

    This document is the high level design document for the Pacific Northwest National Laboratory (PNNL) IEC 62351-3, 4 and 6 standards conformance test software toolkit.

  6. A toolkit for integrated deterministic and probabilistic assessment for hydrogen infrastructure.

    SciTech Connect (OSTI)

    Groth, Katrina; Tchouvelev, Andrei V.

    2014-03-01

    There has been increasing interest in using Quantitative Risk Assessment [QRA] to help improve the safety of hydrogen infrastructure and applications. Hydrogen infrastructure for transportation (e.g. fueling fuel cell vehicles) or stationary (e.g. back-up power) applications is a relatively new area for application of QRA vs. traditional industrial production and use, and as a result there are few tools designed to enable QRA for this emerging sector. There are few existing QRA tools containing models that have been developed and validated for use in small-scale hydrogen applications. However, in the past several years, there has been significant progress in developing and validating deterministic physical and engineering models for hydrogen dispersion, ignition, and flame behavior. In parallel, there has been progress in developing defensible probabilistic models for the occurrence of events such as hydrogen release and ignition. While models and data are available, using this information is difficult due to a lack of readily available tools for integrating deterministic and probabilistic components into a single analysis framework. This paper discusses the first steps in building an integrated toolkit for performing QRA on hydrogen transportation technologies and suggests directions for extending the toolkit.

  7. Rapid Deployment Energy Efficiency (RDEE) Toolkit

    SciTech Connect (OSTI)

    none,

    2009-12-09

    Provides detailed program design and implementation guides to help entities choose successful efficiency programs with funds from the American Recovery and Reinvestment Act of 2009.

  8. Transportation Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    development and growth Is equitable Respects and preserves local cultural and natural landmarks Well-designed transport systems enable economic development and growth by:...

  9. Workplace Charging Toolkit: Workshop Best Practices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Best Practices Workplace Charging Toolkit: Workshop Best Practices These best practices for planning, organizing, and executing a successful and educational workplace charging event have been developed based on lessons learned from more than 20 employer workplace charging events held across the U.S. between 2013 and 2015. Event Objective and Messaging Most workplace charging events fall into three major categories: stakeholder engagement, employer education, and employer recognition. Events

  10. Workplace Charging Toolkit: Workshop Outreach Templates | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Outreach Templates Workplace Charging Toolkit: Workshop Outreach Templates These templates have been developed based on lessons learned from more than 20 employer workplace charging events held across the U.S. between 2013 and 2015. Workshop Agenda Template - Develop a streamlined workshop with this half-day agenda focused on introductory-level PEV education and firsthand employer workplace charging experience. Workshop Host Outreach Letter Template - Approach employers in your

  11. Fact Sheet: Cyber Security Audit and Attack Detection Toolkit

    Office of Environmental Management (EM)

    Cyber Security Audit and Attack Detection Toolkit Adding control system intelligence to widely deployed enterprise vulnerability scanners and security event managers While many energy utilities employ vulnerability scanners and security event managers (SEM) on their enterprise systems, these tools often lack the intelligence necessary to be effective in control systems. This two-year project aims to integrate control system intelligence into widely deployed vulnerability scanners and SEM, and to

  12. Financing Initiatives Toolkit | Open Energy Information

    Open Energy Info (EERE)

    wind, and geothermal technologies, respectively. CREST was originally designed for the U.S. market but could be applied elsewhere if metric conversations are made (e.g., currency...

  13. Guide to Using the WIND Toolkit Validation Code

    SciTech Connect (OSTI)

    Lieberman-Cribbin, W.; Draxl, C.; Clifton, A.

    2014-12-01

    In response to the U.S. Department of Energy's goal of using 20% wind energy by 2030, the Wind Integration National Dataset (WIND) Toolkit was created to provide information on wind speed, wind direction, temperature, surface air pressure, and air density on more than 126,000 locations across the United States from 2007 to 2013. The numerical weather prediction model output, gridded at 2-km and at a 5-minute resolution, was further converted to detail the wind power production time series of existing and potential wind facility sites. For users of the dataset it is important that the information presented in the WIND Toolkit is accurate and that errors are known, as then corrective steps can be taken. Therefore, we provide validation code written in R that will be made public to provide users with tools to validate data of their own locations. Validation is based on statistical analyses of wind speed, using error metrics such as bias, root-mean-square error, centered root-mean-square error, mean absolute error, and percent error. Plots of diurnal cycles, annual cycles, wind roses, histograms of wind speed, and quantile-quantile plots are created to visualize how well observational data compares to model data. Ideally, validation will confirm beneficial locations to utilize wind energy and encourage regional wind integration studies using the WIND Toolkit.

  14. LEDSGP/Transportation Toolkit/Key Actions/Create a Baseline ...

    Open Energy Info (EERE)

    a Baseline) Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Request Assistance Key Actions for Low-Emission Development in Transportation...

  15. Cyber Security Audit and Attack Detection Toolkit: National SCADA Test Bed May 2008

    Broader source: Energy.gov [DOE]

    This project of the cyber security audit and attack detection toolkit is adding control system intelligence to widely deployed enterprise vulnerability scanners and security event managers

  16. RAPID Toolkit: Facilitating Utility-Scale Renewable Energy Development; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    2015-04-01

    The Regulatory and Permitting Information Desktop (RAPID) Toolkit provides information about permits and regulations that affect renewable energy and bulk transmission projects.

  17. Phase 1 Development Report for the SESSA Toolkit.

    SciTech Connect (OSTI)

    Knowlton, Robert G.; Melton, Brad J; Anderson, Robert J.

    2014-09-01

    The Site Exploitation System for Situational Awareness ( SESSA ) tool kit , developed by Sandia National Laboratories (SNL) , is a comprehensive de cision support system for crime scene data acquisition and Sensitive Site Exploitation (SSE). SESSA is an outgrowth of another SNL developed decision support system , the Building R estoration Operations Optimization Model (BROOM), a hardware/software solution for data acquisition, data management, and data analysis. SESSA was designed to meet forensic crime scene needs as defined by the DoD's Military Criminal Investigation Organiza tion (MCIO) . SESSA is a very comprehensive toolki t with a considerable amount of database information managed through a Microsoft SQL (Structured Query Language) database engine, a Geographical Information System (GIS) engine that provides comprehensive m apping capabilities, as well as a an intuitive Graphical User Interface (GUI) . An electronic sketch pad module is included. The system also has the ability to efficiently generate necessary forms for forensic crime scene investigations (e.g., evidence submittal, laboratory requests, and scene notes). SESSA allows the user to capture photos on site, and can read and generate ba rcode labels that limit transcription errors. SESSA runs on PC computers running Windows 7, but is optimized for touch - screen tablet computers running Windows for ease of use at crime scenes and on SSE deployments. A prototype system for 3 - dimensional (3 D) mapping and measur e ments was also developed to complement the SESSA software. The mapping system employs a visual/ depth sensor that captures data to create 3D visualizations of an interior space and to make distance measurements with centimeter - level a ccuracy. Output of this 3D Model Builder module provides a virtual 3D %22walk - through%22 of a crime scene. The 3D mapping system is much less expensive and easier to use than competitive systems. This document covers the basic installation and operation of th e SESSA tool kit in order to give the user enough information to start using the tool kit . SESSA is currently a prototype system and this documentation covers the initial release of the tool kit . Funding for SESSA was provided by the Department of Defense (D oD), Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Rapid Fielding (RF) organization. The project was managed by the Defense Forensic Science Center (DFSC) , formerly known as the U.S. Army Criminal Investigation Laboratory (USACIL) . ACKNOWLEDGEMENTS The authors wish to acknowledge the funding support for the development of the Site Exploitation System for Situational Awareness (SESSA) toolkit from the Department of Defense (DoD), Assistant Secretary of Defense for Research and Engineering (ASD(R&E)) Rapid Fielding (RF) organization. The project was managed by the Defense Forensic Science Center (DFSC) , formerly known as the U.S. Army Criminal Investigation Laboratory (USACIL). Special thanks to Mr. Garold Warner, of DFSC, who served as the Project Manager. Individuals that worked on the design, functional attributes, algorithm development, system arc hitecture, and software programming include: Robert Knowlton, Brad Melton, Robert Anderson, and Wendy Amai.

  18. Machine Learning Toolkit for Extreme Scale

    Energy Science and Technology Software Center (OSTI)

    2014-03-31

    Support Vector Machines (SVM) is a popular machine learning technique, which has been applied to a wide range of domains such as science, finance, and social networks for supervised learning. MaTEx undertakes the challenge of designing a scalable parallel SVM training algorithm for large scale systems, which includes commodity multi-core machines, tightly connected supercomputers and cloud computing systems. Several techniques are proposed for improved speed and memory space usage including adaptive and aggressive elimination ofmore » samples for faster convergence , and sparse format representation of data samples. Several heuristics for earliest possible to lazy elimination of non-contributing samples are considered in MaTEx. In many cases, where an early sample elimination might result in a false positive, low overhead mechanisms for reconstruction of key data structures are proposed. The proposed algorithm and heuristics are implemented and evaluated on various publicly available datasets« less

  19. The Wind Integration National Dataset (WIND) toolkit (Presentation)

    SciTech Connect (OSTI)

    Caroline Draxl: NREL

    2014-01-01

    Regional wind integration studies require detailed wind power output data at many locations to perform simulations of how the power system will operate under high penetration scenarios. The wind datasets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as being time synchronized with available load profiles.As described in this presentation, the WIND Toolkit fulfills these requirements by providing a state-of-the-art national (US) wind resource, power production and forecast dataset.

  20. Regulatory and Permitting Information Desktop (RAPID) Toolkit (Poster)

    SciTech Connect (OSTI)

    Young, K. R.; Levine, A.

    2014-09-01

    The Regulatory and Permitting Information Desktop (RAPID) Toolkit combines the former Geothermal Regulatory Roadmap, National Environmental Policy Act (NEPA) Database, and other resources into a Web-based tool that gives the regulatory and utility-scale geothermal developer communities rapid and easy access to permitting information. RAPID currently comprises five tools - Permitting Atlas, Regulatory Roadmap, Resource Library, NEPA Database, and Best Practices. A beta release of an additional tool, the Permitting Wizard, is scheduled for late 2014. Because of the huge amount of information involved, RAPID was developed in a wiki platform to allow industry and regulatory agencies to maintain the content in the future so that it continues to provide relevant and accurate information to users. In 2014, the content was expanded to include regulatory requirements for utility-scale solar and bulk transmission development projects. Going forward, development of the RAPID Toolkit will focus on expanding the capabilities of current tools, developing additional tools, including additional technologies, and continuing to increase stakeholder involvement.

  1. Overview and Meteorological Validation of the Wind Integration National Dataset toolkit

    SciTech Connect (OSTI)

    Draxl, C.; Hodge, B. M.; Clifton, A.; McCaa, J.

    2015-04-13

    The Wind Integration National Dataset (WIND) Toolkit described in this report fulfills these requirements, and constitutes a state-of-the-art national wind resource data set covering the contiguous United States from 2007 to 2013 for use in a variety of next-generation wind integration analyses and wind power planning. The toolkit is a wind resource data set, wind forecast data set, and wind power production and forecast data set derived from the Weather Research and Forecasting (WRF) numerical weather prediction model. WIND Toolkit data are available online for over 116,000 land-based and 10,000 offshore sites representing existing and potential wind facilities.

  2. PHISICS TOOLKIT: MULTI-REACTOR TRANSMUTATION ANALYSIS UTILITY - MRTAU

    SciTech Connect (OSTI)

    Andrea Alfonsi; Cristian Rabiti; Aaron S. Epiney; Yaqi Wang; Joshua Cogliati

    2012-04-01

    The principal idea of this paper is to present the new capabilities available in the PHISICS toolkit, connected with the implementation of the depletion code MRTAU, a generic depletion/ decay/burn-up code developed at the Idaho National Laboratory. It is programmed in a modular structure and modern FORTRAN 95/2003. The code tracks the time evolution of the isotopic concentration of a given material accounting for nuclear reaction happening in presence of neutron flux and also due to natural decay. MRTAU has two different methods to perform the depletion calculation, in order to let the user choose the best one respect his needs. Both the methodologies and some significant results are reported in this paper.

  3. MeSh ToolKit v1.2

    Energy Science and Technology Software Center (OSTI)

    2004-05-15

    MSTK or Mesh Toolkit is a mesh framework that allows users to represent, manipulate and query unstructured 3D arbitrary topology meshes in a general manner without the need to code their own data structures. MSTK is a flexible framework in that is allows (or will eventually allow) a wide variety of underlying representations for the mesh while maintaining a common interface. It will allow users to choose from different mesh representations either at initialization ormoreduring the program execution so that the optimal data structures are used for the particular algorithm. The interaction of users and applications with MSTK is through a functional interface that acts as through the mesh always contains vertices, edges, faces and regions and maintains connectivity between all these entities.less

  4. Energy Department Announces Publication of Better Buildings Energy Data Accelerator Resources Toolkit

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy today announced the publication of a high-impact, informational resources toolkit through its Better Buildings Energy Data Accelerator developed in partnership with 18...

  5. Wind Integration National Dataset (WIND) Toolkit; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Draxl, Caroline; Hodge, Bri-Mathias

    2015-07-14

    A webinar about the Wind Integration National Dataset (WIND) Toolkit was presented by Bri-Mathias Hodge and Caroline Draxl on July 14, 2015. It was hosted by the Southern Alliance for Clean Energy. The toolkit is a grid integration data set that contains meteorological and power data at a 5-minute resolution across the continental United States for 7 years and hourly power forecasts.

  6. Water Security Toolkit User Manual Version 1.2.

    SciTech Connect (OSTI)

    Klise, Katherine A.; Siirola, John Daniel; Hart, David; Hart, William E.; Phillips, Cynthia A.; Haxton, Terranna; Murray, Regan; Janke, Robert; Taxon, Thomas; Laird, Carl; Seth, Arpan; Hackebeil, Gabriel; McGee, Shawn; Mann, Angelica

    2014-08-01

    The Water Security Toolkit (WST) is a suite of open source software tools that can be used by water utilities to create response strategies to reduce the impact of contamination in a water distribution network . WST includes hydraulic and water quality modeling software , optimizati on methodologies , and visualization tools to identify: (1) sensor locations to detect contamination, (2) locations in the network in which the contamination was introduced, (3) hydrants to remove contaminated water from the distribution system, (4) locations in the network to inject decontamination agents to inactivate, remove, or destroy contaminants, (5) locations in the network to take grab sample s to help identify the source of contamination and (6) valves to close in order to isolate contaminate d areas of the network. This user manual describes the different components of WST , along w ith examples and case studies. License Notice The Water Security Toolkit (WST) v.1.2 Copyright c 2012 Sandia Corporation. Under the terms of Contract DE-AC04-94AL85000, there is a non-exclusive license for use of this work by or on behalf of the U.S. government. This software is distributed under the Revised BSD License (see below). In addition, WST leverages a variety of third-party software packages, which have separate licensing policies: Acro Revised BSD License argparse Python Software Foundation License Boost Boost Software License Coopr Revised BSD License Coverage BSD License Distribute Python Software Foundation License / Zope Public License EPANET Public Domain EPANET-ERD Revised BSD License EPANET-MSX GNU Lesser General Public License (LGPL) v.3 gcovr Revised BSD License GRASP AT&T Commercial License for noncommercial use; includes randomsample and sideconstraints executable files LZMA SDK Public Domain nose GNU Lesser General Public License (LGPL) v.2.1 ordereddict MIT License pip MIT License PLY BSD License PyEPANET Revised BSD License Pyro MIT License PyUtilib Revised BSD License PyYAML MIT License runpy2 Python Software Foundation License setuptools Python Software Foundation License / Zope Public License six MIT License TinyXML zlib License unittest2 BSD License Utilib Revised BSD License virtualenv MIT License Vol Common Public License vpykit Revised BSD License Additionally, some precompiled WST binary distributions might bundle other third-party executables files: Coliny Revised BSD License (part of Acro project) Dakota GNU Lesser General Public License (LGPL) v.2.1 PICO Revised BSD License (part of Acro project) i Revised BSD License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Sandia National Laboratories nor Sandia Corporation nor the names of its con- tributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS %22AS IS%22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IM- PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUD- ING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ii Acknowledgements This work was supported by the U.S. Environmental Protection Agency through its Office of Research and Development (Interagency Agreement %23 DW8992192801). The material in this document has been subject to technical and policy review by the U.S. EPA, and approved for publication. The views expressed by individual authors, however, are their own, and do not necessarily reflect those of the U.S. Environmental Protection Agency. Mention of trade names, products, or services does not convey official U.S. EPA approval, endorsement, or recommendation. The Water Security Toolkit is an extension of the Threat Ensemble Vulnerability Assessment-Sensor Place- ment Optimization Tool (TEVA-SPOT), which was also developed with funding from the U.S. Environ- mental Protection Agency through its Office of Research and Development (Interagency Agreement %23 DW8992192801). The authors acknowledge the following individuals for their contributions to the devel- opment of TEVA-SPOT: Jonathan Berry (Sandia National Laboratories), Erik Boman (Sandia National Laboratories), Lee Ann Riesen (Sandia National Laboratories), James Uber (University of Cincinnati), and Jean-Paul Watson (Sandia National Laboratories). iii Acronyms ATUS American Time-Use Survey BLAS Basic linear algebra sub-routines CFU Colony-forming unit CVAR Conditional value at risk CWS Contamination warning system EA Evolutionary algorithm EDS Event detection system EPA U.S. Environmental Protection Agency EC Extent of Contamination ERD EPANET results database file GLPK GNU Linear Programming Kit GRASP Greedy randomized adaptive sampling process HEX Hexadecimal HTML HyperText markup language INP EPANET input file LP Linear program MC Mass consumed MILP Mixed integer linear program MIP Mixed integer program MSX Multi-species extension for EPANET NFD Number of failed detections NS Number of sensors NZD Non-zero demand PD Population dosed PE Population exposed PK Population killed TAI Threat assessment input file TCE Tailed-conditioned expectation TD Time to detection TEC Timed extent of contamination TEVA Threat ensemble vulnerability assessment TSB Tryptic soy broth TSG Threat scenario generation file TSI Threat simulation input file VAR Value at risk VC Volume consumed WST Water Security Toolkit YML YAML configuration file format for WST iv Symbols Notation Definition Example %7B , %7D set brackets %7B 1,2,3 %7D means a set containing the values 1,2, and 3. [?] is an element of s [?] S means that s is an element of the set S . [?] for all s = 1 [?] s [?] S means that the statement s = 1 is true for all s in set S . P summation P n i =1 s i means s 1 + s 2 + * * * + s n . %5C set minus S %5C T means the set that contains all those elements of S that are not in set T . %7C given %7C is used to define conditional probability. P ( s %7C t ) means the prob- ability of s occurring given that t occurs. %7C ... %7C cardinality Cardinality of a set is the number of elements of the set. If set S = %7B 2,4,6 %7D , then %7C S %7C = 3. v

  7. RAPID/Contact | Open Energy Information

    Open Energy Info (EERE)

    RAPIDContact < RAPID(Redirected from RAPID toolkitContact) Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission...

  8. XOP 2.1 - a new version of the x-ray optics software toolkit. (Conference)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect XOP 2.1 - a new version of the x-ray optics software toolkit. Citation Details In-Document Search Title: XOP 2.1 - a new version of the x-ray optics software toolkit. No abstract prepared. Authors: Sanchez del Rio, M. ; Dejus, R. J. Publication Date: 2003-09-09 OSTI Identifier: 828855 Report Number(s): ANL/XFD/CP-111417 TRN: US0404349 DOE Contract Number: W-31-109-ENG-38 Resource Type: Conference Resource Relation: Conference: 8th International Conference on Synchrotron

  9. Demonstration of a light-redirecting skylight system at the Palm Springs Chamber of Commerce

    SciTech Connect (OSTI)

    Lee, E.S.; Beltran, L.O.; Selkowitz, S.E. [Lawrence Berkeley National Lab., CA (United States); Lau, H.; Ander, G.D. [Southern California Edison, San Dimas, CA (United States)

    1996-05-01

    As part of a demonstration project to provide a comprehensive energy upgrade to a 294 m{sup 2} (3168 ft{sup 2}) commercial building, an advanced skylight design was developed using optical light control materials and geometry to provide daylight to two adjoining offices. The skylight system was developed using outdoor physical model tests and simulation tools Limited on-site measurements and occupant polls were conducted. Market issues were addressed. The skylight systems were found to improve lighting quality and to control excessive daylight illuminance levels compared to a conventional diffusing bubble skylight. Daylighting principles developed in earlier work for vertical glazing systems (light shelves and light pipes) were shown to be applicable in skylight designs at full-scale.

  10. Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed

    SciTech Connect (OSTI)

    Thanachareonkit, Anothai; Lee, Eleanor S.; McNeil, Andrew

    2013-08-31

    Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. Microstructured prismatic window films can be manufactured using low-cost, roll-to-roll fabrication methods and adhered to the inside surface of existing windows as a retrofit measure or installed as a replacement insulating glass unit in the clerestory portion of the window wall. A clear film patterned with linear, 50-250 micrometer high, four-sided asymmetrical prisms was fabricated and installed in the south-facing, clerestory low-e, clear glazed windows of a full-scale testbed facility. Views through the film were distorted. The film was evaluated in a sunny climate over a two-year period to gauge daylighting and visual comfort performance. The daylighting aperture was small (window-towall ratio of 0.18) and the lower windows were blocked off to isolate the evaluation to the window film. Workplane illuminance measurements were made in the 4.6 m (15 ft) deep room furnished as a private office. Analysis of discomfort glare was conducted using high dynamic range imaging coupled with the evalglare software tool, which computes the daylight glare probability and other metrics used to evaluate visual discomfort. The window film was found to result in perceptible levels of discomfort glare on clear sunny days from the most conservative view point in the rear of the room looking toward the window. Daylight illuminance levels at the rear of the room were significantly increased above the reference window condition, which was defined as the same glazed clerestory window but with an interior Venetian blind (slat angle set to the cut-off angle), for the equinox to winter solstice period on clear sunny days. For partly cloudy and overcast sky conditions, daylight levels were improved slightly. To reduce glare, the daylighting film was coupled with a diffusing film in an insulating glazing unit. The diffusing film retained the directionality of the redirected light spreading it within a small range of outgoing angles. This solution was found to reduce glare to imperceptible levels while retaining for the most part the illuminance levels achieved solely by the daylighting film.

  11. Development of an Online Toolkit for Measuring Commercial Building Energy Efficiency Performance -- Scoping Study

    SciTech Connect (OSTI)

    Wang, Na

    2013-03-13

    This study analyzes the market needs for building performance evaluation tools. It identifies the existing gaps and provides a roadmap for the U.S. Department of Energy (DOE) to develop a toolkit with which to optimize energy performance of a commercial building over its life cycle.

  12. Toolkit Model for SN-03 Final Proposal (ratecases/sn03)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Model SN CRAC ToolKit Model Variable, Flat SN CRAC, 80% TPP (TK187SN-03FS3BPA-PropVariableFlatSNN24-Jun-03.xls, 3.1 MB) Data Input Files (required to run the above...

  13. Renewable Energy Technical Potential Toolkit | Open Energy Information

    Open Energy Info (EERE)

    energy access universal? International Energy Agency Technical report Poor People's Energy Outlook 2010 Practical Action Technical report Solar design T-square Brian White...

  14. Voluntary Initiative: Partnership Toolkit, from the U.S. Department of Energy's Better Buildings initiative.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Voluntary Initiative: Partnerships Toolkit BETTER BUILDINGS RESIDENTIAL NETWORK Residential energy efficiency programs are delivered by many different types of organizations and their partners, including utilities, state and local governments, non-profit organizations, and for-profit companies, but no matter which sector delivers the program, the need to work in partnership with different entities can make or break program success. Definition Partnerships are relationships between two or more

  15. News Release: Advanced Network Toolkit for Assessments and Remote Mapping (ANTFARM)

    Office of Environmental Management (EM)

    No-Cost ANTFARM Tool Maps Control System Networks to Help Implement Cyber Security Standards Funded under the Department of Energy's National SCADA Test Bed Program, Sandia National Laboratories recently released a new software tool that will aid energy utility owners in mapping and visualizing their control system networks-a critical first step in meeting the North American Electric Reliability Corporation's Critical Infrastructure Protection (NERC CIP) standards. The Advanced Network Toolkit

  16. Category:RAPID Toolkit Library | Open Energy Information

    Open Energy Info (EERE)

    of Water Resources 2 C.C.R. 410 - Rules and Regulations for the Management and Control of Designated Ground Water 2 CCR 402-10 - Rules and Regulations for Geothermal Well...

  17. Toolkit for Integrated Impact Assessments version 1.0

    Energy Science and Technology Software Center (OSTI)

    2007-05-14

    TIIA is designed to perform ecological and human risk assessments for environmental contaminants in air, water, soil, and sediment. It uses a novel approach that applies to radionuclides and hazardous chemicals, based on a food web approach. Stochastic calculations (i.e., those that allow for propagation of uncertainty in a numerical fashion) are allowed.

  18. Land-use Policy and Program Design Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Pages S251-S264 | Wheater, H.; Evans, E. Exploring land use changes and the role of palm oil production in Indonesia and Malaysia Land Use Policy, Volume 28, Issue 1, Pages...

  19. THYME: Toolkit for Hybrid Modeling of Electric Power Systems

    Energy Science and Technology Software Center (OSTI)

    2011-01-01

    THYME is an object oriented library for building models of wide area control and communications in electric power systems. This software is designed as a module to be used with existing open source simulators for discrete event systems in general and communication systems in particular. THYME consists of a typical model for simulating electro-mechanical transients (e.g., as are used in dynamic stability studies), data handling objects to work with CDF and PTI formatted power flowmore » data, and sample models of discrete sensors and controllers.« less

  20. Structural Simluation Toolkit (SST) V 2.0

    Energy Science and Technology Software Center (OSTI)

    2009-12-04

    The SST provides a parallel framework to perform system simulation of computer architectures to determine their performance and power consumption. Additionally, the SST contains basic models of a computer processor, and interconnect and can connect to an external memory simulator (DRAMSim II). The SST framework provides a simple interface by which other computer simulation models can be combined under a common parallel discrete event-based simulation environment. This allows design exploration of future architectures, analysis ofmore » how current computer programs will function on future architectures. The SST provides a parallel discrete event simulation framework, including partitioning and object distribution over MPI. It also provides a mechanism by which components can report their power consumption for analysis.« less

  1. Modeling of a Flooding Induced Station Blackout for a Pressurized Water Reactor Using the RISMC Toolkit

    SciTech Connect (OSTI)

    Mandelli, Diego; Prescott, Steven R; Smith, Curtis L; Alfonsi, Andrea; Rabiti, Cristian; Cogliati, Joshua J; Kinoshita, Robert A

    2011-07-01

    In the Risk Informed Safety Margin Characterization (RISMC) approach we want to understand not just the frequency of an event like core damage, but how close we are (or are not) to key safety-related events and how might we increase our safety margins. The RISMC Pathway uses the probabilistic margin approach to quantify impacts to reliability and safety by coupling both probabilistic (via stochastic simulation) and mechanistic (via physics models) approaches. This coupling takes place through the interchange of physical parameters and operational or accident scenarios. In this paper we apply the RISMC approach to evaluate the impact of a power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., system activation) and to perform statistical analyses (e.g., run multiple RELAP-7 simulations where sequencing/timing of events have been changed according to a set of stochastic distributions). By using the RISMC toolkit, we can evaluate how power uprate affects the system recovery measures needed to avoid core damage after the PWR lost all available AC power by a tsunami induced flooding. The simulation of the actual flooding is performed by using a smooth particle hydrodynamics code: NEUTRINO.

  2. A flooding induced station blackout analysis for a pressurized water reactor using the RISMC toolkit

    SciTech Connect (OSTI)

    Mandelli, Diego; Prescott, Steven; Smith, Curtis; Alfonsi, Andrea; Rabiti, Cristian; Cogliati, Joshua; Kinoshita, Robert

    2015-05-17

    In this paper we evaluate the impact of a power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: the RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., component/system activation) and to perform statistical analyses. In our case, the simulation of the flooding is performed by using an advanced smooth particle hydrodynamics code called NEUTRINO. The obtained results allow the user to investigate and quantify the impact of timing and sequencing of events on system safety. The impact of power uprate is determined in terms of both core damage probability and safety margins.

  3. Advancements in Wind Integration Study Data Modeling: The Wind Integration National Dataset (WIND) Toolkit; Preprint

    SciTech Connect (OSTI)

    Draxl, C.; Hodge, B. M.; Orwig, K.; Jones, W.; Searight, K.; Getman, D.; Harrold, S.; McCaa, J.; Cline, J.; Clark, C.

    2013-10-01

    Regional wind integration studies in the United States require detailed wind power output data at many locations to perform simulations of how the power system will operate under high-penetration scenarios. The wind data sets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as be time synchronized with available load profiles. The Wind Integration National Dataset (WIND) Toolkit described in this paper fulfills these requirements. A wind resource dataset, wind power production time series, and simulated forecasts from a numerical weather prediction model run on a nationwide 2-km grid at 5-min resolution will be made publicly available for more than 110,000 onshore and offshore wind power production sites.

  4. A flooding induced station blackout analysis for a pressurized water reactor using the RISMC toolkit

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mandelli, Diego; Prescott, Steven; Smith, Curtis; Alfonsi, Andrea; Rabiti, Cristian; Cogliati, Joshua; Kinoshita, Robert

    2015-05-17

    In this paper we evaluate the impact of a power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: the RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., component/system activation) and to perform statistical analyses. In our case, the simulation of the flooding is performed by using an advanced smooth particle hydrodynamics code calledmore » NEUTRINO. The obtained results allow the user to investigate and quantify the impact of timing and sequencing of events on system safety. The impact of power uprate is determined in terms of both core damage probability and safety margins.« less

  5. Multi-Physics Demonstration Problem with the SHARP Reactor Simulation Toolkit

    SciTech Connect (OSTI)

    Merzari, E.; Shemon, E. R.; Yu, Y. Q.; Thomas, J. W.; Obabko, A.; Jain, Rajeev; Mahadevan, Vijay; Tautges, Timothy; Solberg, Jerome; Ferencz, Robert Mark; Whitesides, R.

    2015-12-21

    This report describes to employ SHARP to perform a first-of-a-kind analysis of the core radial expansion phenomenon in an SFR. This effort required significant advances in the framework Multi-Physics Demonstration Problem with the SHARP Reactor Simulation Toolkit used to drive the coupled simulations, manipulate the mesh in response to the deformation of the geometry, and generate the necessary modified mesh files. Furthermore, the model geometry is fairly complex, and consistent mesh generation for the three physics modules required significant effort. Fully-integrated simulations of a 7-assembly mini-core test problem have been performed, and the results are presented here. Physics models of a full-core model of the Advanced Burner Test Reactor have also been developed for each of the three physics modules. Standalone results of each of the three physics modules for the ABTR are presented here, which provides a demonstration of the feasibility of the fully-integrated simulation.

  6. Oak Ridge Bio-surveillance Toolkit (ORBiT): Integrating Big-Data Analytics with Visual Analysis for Public Health Dynamics

    SciTech Connect (OSTI)

    Ramanathan, Arvind; Pullum, Laura L; Steed, Chad A; Chennubhotla, Chakra; Quinn, Shannon

    2013-01-01

    In this position paper, we describe the design and implementation of the Oak Ridge Bio-surveillance Toolkit (ORBiT): a collection of novel statistical and machine learning tools implemented for (1) integrating heterogeneous traditional (e.g. emergency room visits, prescription sales data, etc.) and non-traditional (social media such as Twitter and Instagram) data sources, (2) analyzing large-scale datasets and (3) presenting the results from the analytics as a visual interface for the end-user to interact and provide feedback. We present examples of how ORBiT can be used to summarize ex- tremely large-scale datasets effectively and how user interactions can translate into the data analytics process for bio-surveillance. We also present a strategy to estimate parameters relevant to dis- ease spread models from near real time data feeds and show how these estimates can be integrated with disease spread models for large-scale populations. We conclude with a perspective on how integrating data and visual analytics could lead to better forecasting and prediction of disease spread as well as improved awareness of disease susceptible regions.

  7. RAPID/Geothermal/Roadmap | Open Energy Information

    Open Energy Info (EERE)

    RAPIDGeothermalRoadmap < RAPID | Geothermal(Redirected from RAPIDRoadmapGeoSections) Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit...

  8. RAPID/Tools | Open Energy Information

    Open Energy Info (EERE)

    RAPIDTools < RAPID(Redirected from RAPIDResources) Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal...

  9. RAPID/Solar/Land Access | Open Energy Information

    Open Energy Info (EERE)

    RAPIDSolarLand Access < RAPID | Solar(Redirected from RAPIDSolarLeasing) Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About...

  10. RAPID/Overview | Open Energy Information

    Open Energy Info (EERE)

    RAPIDOverview < RAPID(Redirected from RAPIDAtlas) Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal...

  11. GCTool: Design, Analyze and Compare Fuel Cell Systems and Power Plants |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne National Laboratory GCTool: Design, Analyze and Compare Fuel Cell Systems and Power Plants GCTool allows you to design, analyze, and compare different fuel cell configurations, including automotive, space-based, and stationary systems. GCTool allows you to design, analyze, and compare different fuel cell configurations, including automotive, space-based, and stationary systems. Argonne's GCTool (General Computational toolkit) is a versatile simulation software package that allows the

  12. HyRAM Testing Strategy and Quality Design Elements.

    SciTech Connect (OSTI)

    Reynolds, John Thomas

    2014-12-01

    Strategy document and tentative schedule for testing of HyRAM, a software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. Because proposed and existing features in HyRAM that support testing are important factors in this discussion, relevant design considerations of HyRAM are also discussed. However, t his document does not cover all of HyRAM desig n, nor is the full HyRAM software development schedule included.

  13. Stage 1: Organizing the LEDS Process | Open Energy Information

    Open Energy Info (EERE)

    potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening and Design Toolkit Land Use Assessment...

  14. DAKOTA, a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis:version 4.0 reference manual

    SciTech Connect (OSTI)

    Griffin, Joshua D. (Sandai National Labs, Livermore, CA); Eldred, Michael Scott; Martinez-Canales, Monica L.; Watson, Jean-Paul; Kolda, Tamara Gibson; Adams, Brian M.; Swiler, Laura Painton; Williams, Pamela J.; Hough, Patricia Diane; Gay, David M.; Dunlavy, Daniel M.; Eddy, John P.; Hart, William Eugene; Guinta, Anthony A.; Brown, Shannon L.

    2006-10-01

    The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes and iterative analysis methods. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, and stochastic finite element methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a reference manual for the commands specification for the DAKOTA software, providing input overviews, option descriptions, and example specifications.

  15. GridPACK Toolkit for Developing Power Grid Simulations on High Performance Computing Platforms

    SciTech Connect (OSTI)

    Palmer, Bruce J.; Perkins, William A.; Glass, Kevin A.; Chen, Yousu; Jin, Shuangshuang; Callahan, Charles D.

    2013-11-30

    This paper describes the GridPACK framework, which is designed to help power grid engineers develop modeling software capable of running on todays high performance computers. The framework contains modules for setting up distributed power grid networks, assigning buses and branches with arbitrary behaviors to the network, creating distributed matrices and vectors, using parallel linear and non-linear solvers to solve algebraic equations, and mapping functionality to create matrices and vectors based on properties of the network. In addition, the framework contains additional functionality to support IO and to manage errors.

  16. Renewable Energy Cost Modeling. A Toolkit for Establishing Cost-Based Incentives in the United States

    SciTech Connect (OSTI)

    Gifford, Jason S.; Grace, Robert C.; Rickerson, Wilson H.

    2011-05-01

    This report serves as a resource for policymakers who wish to learn more about levelized cost of energy (LCOE) calculations, including cost-based incentives. The report identifies key renewable energy cost modeling options, highlights the policy implications of choosing one approach over the other, and presents recommendations on the optimal characteristics of a model to calculate rates for cost-based incentives, FITs, or similar policies. These recommendations shaped the design of NREL's Cost of Renewable Energy Spreadsheet Tool (CREST), which is used by state policymakers, regulators, utilities, developers, and other stakeholders to assist with analyses of policy and renewable energy incentive payment structures. Authored by Jason S. Gifford and Robert C. Grace of Sustainable Energy Advantage LLC and Wilson H. Rickerson of Meister Consultants Group, Inc.

  17. DAKOTA Design Analysis Kit for Optimization and Terascale

    Energy Science and Technology Software Center (OSTI)

    2010-02-24

    The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes (computational models) and iterative analysis methods. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and analysis of computational models on high performance computers.A user provides a set of DAKOTA commands in an input file andmore » launches DAKOTA. DAKOTA invokes instances of the computational models, collects their results, and performs systems analyses. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, polynomial chaos, stochastic collocation, and epistemic methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as hybrid optimization, surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. Services for parallel computing, simulation interfacing, approximation modeling, fault tolerance, restart, and graphics are also included.« less

  18. Redirection of metabolism for hydrogen production

    SciTech Connect (OSTI)

    Harwood, Caroline S.

    2011-11-28

    This project is to develop and apply techniques in metabolic engineering to improve the biocatalytic potential of the bacterium Rhodopseudomonas palustris for nitrogenase-catalyzed hydrogen gas production. R. palustris, is an ideal platform to develop as a biocatalyst for hydrogen gas production because it is an extremely versatile microbe that produces copious amounts of hydrogen by drawing on abundant natural resources of sunlight and biomass. Anoxygenic photosynthetic bacteria, such as R. palustris, generate hydrogen and ammonia during a process known as biological nitrogen fixation. This reaction is catalyzed by the enzyme nitrogenase and normally consumes nitrogen gas, ATP and electrons. The applied use of nitrogenase for hydrogen production is attractive because hydrogen is an obligatory product of this enzyme and is formed as the only product when nitrogen gas is not supplied. Our challenge is to understand the systems biology of R. palustris sufficiently well to be able to engineer cells to produce hydrogen continuously, as fast as possible and with as high a conversion efficiency as possible of light and electron donating substrates. For many experiments we started with a strain of R. palustris that produces hydrogen constitutively under all growth conditions. We then identified metabolic pathways and enzymes important for removal of electrons from electron-donating organic compounds and for their delivery to nitrogenase in whole R. palustris cells. For this we developed and applied improved techniques in 13C metabolic flux analysis. We identified reactions that are important for generating electrons for nitrogenase and that are yield-limiting for hydrogen production. We then increased hydrogen production by blocking alternative electron-utilizing metabolic pathways by mutagenesis. In addition we found that use of non-growing cells as biocatalysts for hydrogen gas production is an attractive option, because cells divert all resources away from growth and to hydrogen. Also R. palustris cells remain viable in a non-growing state for long periods of time.

  19. MCS Systems Administration Toolkit

    Energy Science and Technology Software Center (OSTI)

    2001-09-30

    This package contains a number of systems administration utilities to assist a team of system administrators in managing a computer environment by automating routine tasks and centralizing information. Included are utilities to help install software on a network of computers and programs to make an image of a disk drive, to manage and distribute configuration files for a number of systems, and to run self-testss on systems, as well as an example of using amore » database to manage host information and various utilities.« less

  20. AISL Development Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-09-13

    AISLDT is a library of utility functions supporting other AISL software. Code provides various utility functions for Common Lisp, including an object-oriented database, distributed objects, logic query engine, web content management, chart drawing, packet sniffing, text processing, and various data structures.

  1. Pizza.py Toolkit

    Energy Science and Technology Software Center (OSTI)

    2006-01-01

    Pizza.py is a loosely integrated collection of tools, many of which provide support for the LAMMPS molecular dynamics and ChemCell cell modeling packages. There are tools to create input files. convert between file formats, process log and dump files, create plots, and visualize and animate simulation snapshots. Software packages that are wrapped by Pizza.py. so they can invoked from within Python, include GnuPlot, MatLab, Raster3d. and RasMol. Pizza.py is written in Python and runs onmore » any platform that supports Python. Pizza.py enhances the standard Python interpreter in a few simple ways. Its tools are Python modules which can be invoked interactively, from scripts, or from GUIs when appropriate. Some of the tools require additional Python packages to be installed as part of the users Python. Others are wrappers on software packages (as listed above) which must be available on the users system. It is easy to modify or extend Pizza.py with new functionality or new tools, which need not have anything to do with LAMMPS or ChemCell.« less

  2. Residential Marketing Toolkit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Events Expand News & Events Skip navigation links Residential Residential Lighting Energy Star Appliances Consumer Electronics Heat Pump Water Heaters Electric Storage Water...

  3. NREL Fleet Analysis Toolkit

    Energy Science and Technology Software Center (OSTI)

    2006-12-31

    The software analyzes large time-dependent data sets from fleets of vehicles and their fueling infrastructure to characterize performance metrics including efficiency, durability, fueling rates and usage patterns.

  4. ppt-toolkit.com

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spend by State - Fiscal Year 2014 Color Key: More than 1 million 300,000 to 1 million 100,000 to 300,000 5,000 to 100,000 Less than 5,000...

  5. Solar Site Survey Toolkit

    Broader source: Energy.gov [DOE]

    After a couple outings, a principal technologist at Sandia National Laboratories saw a need for a travel kit that would have the necessary tools to make the task of site surveys more manageable and safer. They have had great success using the kit in the field already.

  6. Portable Application Code Toolkit

    Energy Science and Technology Software Center (OSTI)

    2009-01-01

    PACT is a set of tools to help software developers create applications that will run on any platform and data that can be written/read on any platform.

  7. Design and Fabrication of Cherenkov Counters for the Detection of SNM

    SciTech Connect (OSTI)

    Erickson, Anna S.; Lanza, Richard; Galaitsis, Anthony; Hynes, Michael; Blackburn, Brandon; Bernstein, Adam

    2011-12-13

    The need for large-size detectors for long-range active interrogation (AI) detection of SNM has generated interest in water-based detector technologies. Water Cherenkov Detectors (WCD) were selected for this research because of their transportability, scalability, and an inherent energy threshold. The detector design and analysis was completed using the Geant4 toolkit. It was demonstrated both computationally and experimentally that it is possible to use WCD to detect and characterize gamma rays. Absolute efficiency of the detector (with no energy cuts applied) was determined to be around 30% for a {sup 60}Co source.

  8. Solar Power Tower Design Basis Document, Revision 0

    SciTech Connect (OSTI)

    ZAVOICO,ALEXIS B.

    2001-07-01

    This report contains the design basis for a generic molten-salt solar power tower. A solar power tower uses a field of tracking mirrors (heliostats) that redirect sunlight on to a centrally located receiver mounted on top a tower, which absorbs the concentrated sunlight. Molten nitrate salt, pumped from a tank at ground level, absorbs the sunlight, heating it up to 565 C. The heated salt flows back to ground level into another tank where it is stored, then pumped through a steam generator to produce steam and make electricity. This report establishes a set of criteria upon which the next generation of solar power towers will be designed. The report contains detailed criteria for each of the major systems: Collector System, Receiver System, Thermal Storage System, Steam Generator System, Master Control System, and Electric Heat Tracing System. The Electric Power Generation System and Balance of Plant discussions are limited to interface requirements. This design basis builds on the extensive experience gained from the Solar Two project and includes potential design innovations that will improve reliability and lower technical risk. This design basis document is a living document and contains several areas that require trade-studies and design analysis to fully complete the design basis. Project- and site-specific conditions and requirements will also resolve open To Be Determined issues.

  9. DAKOTA : a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis.

    SciTech Connect (OSTI)

    Eldred, Michael Scott; Vigil, Dena M.; Dalbey, Keith R.; Bohnhoff, William J.; Adams, Brian M.; Swiler, Laura Painton; Lefantzi, Sophia; Hough, Patricia Diane; Eddy, John P.

    2011-12-01

    The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes and iterative analysis methods. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, and stochastic expansion methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a theoretical manual for selected algorithms implemented within the DAKOTA software. It is not intended as a comprehensive theoretical treatment, since a number of existing texts cover general optimization theory, statistical analysis, and other introductory topics. Rather, this manual is intended to summarize a set of DAKOTA-related research publications in the areas of surrogate-based optimization, uncertainty quantification, and optimization under uncertainty that provide the foundation for many of DAKOTA's iterative analysis capabilities.

  10. Dakota, a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis :

    SciTech Connect (OSTI)

    Adams, Brian M.; Ebeida, Mohamed Salah; Eldred, Michael S.; Jakeman, John Davis; Swiler, Laura Painton; Stephens, John Adam; Vigil, Dena M.; Wildey, Timothy Michael; Bohnhoff, William J.; Eddy, John P.; Hu, Kenneth T.; Dalbey, Keith R.; Bauman, Lara E; Hough, Patricia Diane

    2014-05-01

    The Dakota (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a exible and extensible interface between simulation codes and iterative analysis methods. Dakota contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quanti cation with sampling, reliability, and stochastic expansion methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the Dakota toolkit provides a exible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a user's manual for the Dakota software and provides capability overviews and procedures for software execution, as well as a variety of example studies.

  11. Safeguards-By-Design: Guidance and Tools for Stakeholders

    SciTech Connect (OSTI)

    Mark Schanfein; Shirley Johnson

    2012-02-01

    Effective implementation of the Safeguards-by-Design (SBD) approach can help meet the challenges of global nuclear energy growth, by designing facilities that have improved safeguardability and reduced safeguards-related life cycle costs. The ultimate goal of SBD is to implement effective and efficient safeguards that reduce the burden to both the facility operator and the International Atomic Energy Agency. Since 2008, the National Nuclear Security Administration's Next Generation Safeguards Initiative's Safeguards By Design Project has initiated multiple studies and workshops with industry and regulatory stakeholders, including the IAEA, to develop relevant documents to support the implementation of SBD. These 'Good Practices Guides' describe facility and process design features that will facilitate implementation of effective nuclear material safeguards starting in the earliest phases of design through to final design. These guides, which are in their final editorial stages, start at a high level and then narrow down to specific nuclear fuel cycle facilities such as Light Water Reactors, Generation III/IV Reactors, High Temperature Gas Cooled Reactors, and Gas Centrifuge Enrichment Plants. Most recently, NGSI has begun development of a facility safeguardability assessment toolkit to assist the designer. This paper will review the current status of these efforts, provide some examples of these documents, and show some standard IAEA Unattended Instrumentation that is permanently installed in nuclear facilities for monitoring.

  12. Renewable Energy Cost Modeling: A Toolkit for Establishing Cost-Based Incentives in the United States; March 2010 -- March 2011

    SciTech Connect (OSTI)

    Gifford, J. S.; Grace, R. C.; Rickerson, W. H.

    2011-05-01

    This report is intended to serve as a resource for policymakers who wish to learn more about establishing cost-based incentives. The report will identify key renewable energy cost modeling options, highlight the policy implications of choosing one approach over the other, and present recommendations on the optimal characteristics of a model to calculate rates for cost-based incentives, feed-in tariffs (FITs), or similar policies. These recommendations will be utilized in designing the Cost of Renewable Energy Spreadsheet Tool (CREST). Three CREST models will be publicly available and capable of analyzing the cost of energy associated with solar, wind, and geothermal electricity generators. The CREST models will be developed for use by state policymakers, regulators, utilities, developers, and other stakeholders to assist them in current and future rate-setting processes for both FIT and other renewable energy incentive payment structures and policy analyses.

  13. DAKOTA, a multilevel parellel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis:version 4.0 uers's manual.

    SciTech Connect (OSTI)

    Griffin, Joshua D.; Eldred, Michael Scott; Martinez-Canales, Monica L.; Watson, Jean-Paul; Kolda, Tamara Gibson; Giunta, Anthony Andrew; Adams, Brian M.; Swiler, Laura Painton; Williams, Pamela J.; Hough, Patricia Diane; Gay, David M.; Dunlavy, Daniel M.; Eddy, John P.; Hart, William Eugene; Brown, Shannon L.

    2006-10-01

    The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes and iterative analysis methods. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, and stochastic finite element methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a user's manual for the DAKOTA software and provides capability overviews and procedures for software execution, as well as a variety of example studies.

  14. DAKOTA : a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis. Version 5.0, user's manual.

    SciTech Connect (OSTI)

    Eldred, Michael Scott; Dalbey, Keith R.; Bohnhoff, William J.; Adams, Brian M.; Swiler, Laura Painton; Hough, Patricia Diane; Gay, David M.; Eddy, John P.; Haskell, Karen H.

    2010-05-01

    The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes and iterative analysis methods. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, and stochastic finite element methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a user's manual for the DAKOTA software and provides capability overviews and procedures for software execution, as well as a variety of example studies.

  15. DAKOTA : a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis. Version 5.0, developers manual.

    SciTech Connect (OSTI)

    Eldred, Michael Scott; Dalbey, Keith R.; Bohnhoff, William J.; Adams, Brian M.; Swiler, Laura Painton; Hough, Patricia Diane; Gay, David M.; Eddy, John P.; Haskell, Karen H.

    2010-05-01

    The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes and iterative analysis methods. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, and stochastic finite element methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a developers manual for the DAKOTA software and describes the DAKOTA class hierarchies and their interrelationships. It derives directly from annotation of the actual source code and provides detailed class documentation, including all member functions and attributes.

  16. Dakota, a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis:version 4.0 developers manual.

    SciTech Connect (OSTI)

    Griffin, Joshua D. (Sandia National lababoratory, Livermore, CA); Eldred, Michael Scott; Martinez-Canales, Monica L.; Watson, Jean-Paul; Kolda, Tamara Gibson (Sandia National lababoratory, Livermore, CA); Giunta, Anthony Andrew; Adams, Brian M.; Swiler, Laura Painton; Williams, Pamela J.; Hough, Patricia Diane (Sandia National lababoratory, Livermore, CA); Gay, David M.; Dunlavy, Daniel M.; Eddy, John P.; Hart, William Eugene; Brown, Shannon L.

    2006-10-01

    The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes and iterative analysis methods. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, and stochastic finite element methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a developers manual for the DAKOTA software and describes the DAKOTA class hierarchies and their interrelationships. It derives directly from annotation of the actual source code and provides detailed class documentation, including all member functions and attributes.

  17. Utilizing object-oriented design to build advanced optimization strategies with generic implementation

    SciTech Connect (OSTI)

    Eldred, M.S.; Hart, W.E.; Bohnhoff, W.J.; Romero, V.J.; Hutchinson, S.A.; Salinger, A.G.

    1996-08-01

    the benefits of applying optimization to computational models are well known, but their range of widespread application to date has been limited. This effort attempts to extend the disciplinary areas to which optimization algorithms may be readily applied through the development and application of advanced optimization strategies capable of handling the computational difficulties associated with complex simulation codes. Towards this goal, a flexible software framework is under continued development for the application of optimization techniques to broad classes of engineering applications, including those with high computational expense and nonsmooth, nonconvex design space features. Object-oriented software design with C++ has been employed as a tool in providing a flexible, extensible, and robust multidisciplinary toolkit with computationally intensive simulations. In this paper, demonstrations of advanced optimization strategies using the software are presented in the hybridization and parallel processing research areas. Performance of the advanced strategies is compared with a benchmark nonlinear programming optimization.

  18. Geospatial Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Ghana, Guatemala, Honduras, India, Nepal, Nicaragua, Oaxaca, Pakistan, Sri Lanka, Turkey Cost: Free Southern Asia, Southern Asia, Southern Asia, South America, Eastern Asia,...

  19. Model Analysis ToolKit

    Energy Science and Technology Software Center (OSTI)

    2015-05-15

    MATK provides basic functionality to facilitate model analysis within the Python computational environment. Model analysis setup within MATK includes: - define parameters - define observations - define model (python function) - define samplesets (sets of parameter combinations) Currently supported functionality includes: - forward model runs - Latin-Hypercube sampling of parameters - multi-dimensional parameter studies - parallel execution of parameter samples - model calibration using internal Levenberg-Marquardt algorithm - model calibration using lmfit package - modelmore » calibration using levmar package - Markov Chain Monte Carlo using pymc package MATK facilitates model analysis using: - scipy - calibration (scipy.optimize) - rpy2 - Python interface to R« less

  20. Geospatial Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Company Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Solar, Wind Phase: Determine Baseline Topics: Resource assessment Resource Type: Guide...

  1. Advanced Network Toolkit for Assessments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    control system network * Compiles and correlates large amounts of network data with minimal risk of system latency or disruption * Assists compliance with NERC CIP standards * ...

  2. Identification of the meiotic toolkit in diatoms and exploration of meiosis-specific SPO11 and RAD51 homologs in the sexual species Pseudo-nitzschia multistriata and Seminavis robusta

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Patil, Shrikant; Moeys, Sara; von Dassow, Peter; Huysman, Marie J. J.; Mapleson, Daniel; De Veylder, Lieven; Sanges, Remo; Vyverman, Wim; Montresor, Marina; Ferrante, Maria Immacolata

    2015-11-14

    Sexual reproduction is an obligate phase in the life cycle of most eukaryotes. Meiosis varies among organisms, which is reflected by the variability of the gene set associated to the process. Diatoms are unicellular organisms that belong to the stramenopile clade and have unique life cycles that can include a sexual phase. The exploration of five diatom genomes and one diatom transcriptome led to the identification of 42 genes potentially involved in meiosis. While these include the majority of known meiosis-related genes, several meiosis-specific genes, including DMC1, could not be identified. Furthermore, phylogenetic analyses supported gene identification and revealed ancestralmore » loss and recent expansion in the RAD51 family in diatoms. The two sexual species Pseudo-nitzschia multistriata and Seminavis robusta were used to explore the expression of meiosis-related genes: RAD21, SPO11-2, RAD51-A, RAD51-B and RAD51-C were upregulated during meiosis, whereas other paralogs in these families showed no differential expression patterns, suggesting that they may play a role during vegetative divisions. An almost identical toolkit is shared among Pseudo-nitzschia multiseries and Fragilariopsis cylindrus, as well as two species for which sex has not been observed, Phaeodactylum tricornutum and Thalassiosira pseudonana, suggesting that these two may retain a facultative sexual phase. Lastly, our results reveal the conserved meiotic toolkit in six diatom species and indicate that Stramenopiles share major modifications of canonical meiosis processes ancestral to eukaryotes, with important divergences in each Kingdom.« less

  3. COLLOQUIUM: Dawn, the Asteroid Redirect Mission, and the Future...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at PPPL, adult visitors must show a government-issued photo I.D. - for example, a passport or a driver's license. Non-U.S. citizens must show a government-issued photo I.D.,...

  4. Document Splash Screen for Redirecting to Updated Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The document you are trying to access has been updated. Click the button below to access the most recent version. Go To Publication

  5. Toward a Performance/Resilience Tool for Hardware/Software Co-Design of High-Performance Computing Systems

    SciTech Connect (OSTI)

    Engelmann, Christian; Naughton, III, Thomas J

    2013-01-01

    xSim is a simulation-based performance investigation toolkit that permits running high-performance computing (HPC) applications in a controlled environment with millions of concurrent execution threads, while observing application performance in a simulated extreme-scale system for hardware/software co-design. The presented work details newly developed features for xSim that permit the injection of MPI process failures, the propagation/detection/notification of such failures within the simulation, and their handling using application-level checkpoint/restart. These new capabilities enable the observation of application behavior and performance under failure within a simulated future-generation HPC system using the most common fault handling technique.

  6. Design of Integrated III-Nitride/Non-III-Nitride Tandem Photovoltaic Devices

    SciTech Connect (OSTI)

    Toledo, N. G.; Friedman, D.J.; Farrell, R. M.; Perl, E. E.; Lin, C. T.; Bowers, J. E.; Speck, J. S.; Mishra, U. K.

    2012-03-01

    The integration of III-nitride and non-III-nitride materials for tandem solar cell applications can improve the efficiency of the photovoltaic device due to the added power contributed by the III-nitride top cell to that of high-efficiency multi-junction non-III-nitride solar cells if the device components are properly designed and optimized. The proposed tandem solar cell is comprised of a III-nitride top cell bonded to a non-III-nitride, series-constrained, multi-junction subcell. The top cell is electrically isolated, but optically coupled to the underlying subcell. The use of a III-nitride top cell is potentially beneficial when the top junction of a stand-alone non-III-nitride subcell generates more photocurrent than the limiting current of the non-III-nitride subcell. Light producing this excess current can either be redirected to the III-nitride top cell through high energy photon absorption, redirected to the lower junctions through layer thickness optimization, or a combination of both, resulting in improved total efficiency. When the non-III-nitride cell's top junction is the limiting junction, the minimum power conversion efficiency that the III-nitride top cell must contribute should compensate for the spectrum filtered from the multi-junction subcell for this design to be useful. As the III-nitride absorption edge wavelength, {lambda}{sub N}, increases, the performance of the multi-junction subcell decreases due to spectral filtering. In the most common spectra of interest (AM1.5G, AM1.5 D, and AM0), the technology to grow InGaN cells with {lambda}{sub N}<520 nm is found to be sufficient for III-nitride top cell applications. The external quantum efficiency performance, however, of state-of-the-art InGaN solar cells still needs to be improved. The effects of surface/interface reflections are also presented. The management of these reflection issues determines the feasibility of the integrated III-nitride/non-III-nitride design to improve overall cell efficiency.

  7. Design Considerations

    Office of Environmental Management (EM)

    TS NOT MEASUREMENT SENSITIVE DOE-HDBK-1132-99 April 1999 Reaffirmed 2014 DOE HANDBOOK DESIGN CONSIDERATIONS U.S. Department of Energy AREA EDCN Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-1132-99 February 2014 Table of Changes Page Paragraph Changed To Throughout Reference citations. Revised all reference citations throughout the Order to reflect current versions of the documents. Throughout Formatting Made editorial and

  8. Center for Inverse Design: Inverse Design Approach

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inverse Design Approach This page describes the inverse materials design methodology used by the Center for Inverse Design, which integrates and combines the following: (1) theory,...

  9. PM Motor Parametric Design Analyses for Hybrid Electric Vehicle Traction Drive Application: Interim Report

    SciTech Connect (OSTI)

    Staunton, R.H.

    2004-08-11

    The Department of Energy's (DOE) Office of FreedomCAR (Cooperative Automotive Research) and Vehicle Technologies has a strong interest in making rapid progress in permanent magnet (PM) machine development. The program is directing various technology development projects that will advance the technology and lead to request for proposals (RFP) for manufacturer prototypes. This aggressive approach is possible because the technology is clearly within reach and the approach is deemed essential, based on strong market demand, escalating fuel prices, and competitive considerations. In response, this study began parallel development paths that included a literature search/review, development and utilization of multiple parametric models to determine the effects of design parameters, verification of the modeling methodology, development of an interior PM (IPM) machine baseline design, development of alternative machine baseline designs, and cost analyses for several candidate machines. This interim progress report summarizes the results of these activities as of June 2004. This report provides background and summary information for recent machine parametric studies and testing programs that demonstrate both the potential capabilities and technical limitations of brushless PM machines (axial gap and radial gap), the IPM machine, the surface-mount PM machines (interior or exterior rotor), induction machines, and switched reluctance machines. The FreedomCAR program, while acknowledging the progress made by Oak Ridge National Laboratory, Delphi, Delco-Remy International, and others in these programs, has redirected efforts toward a ''short path'' to a marketable and competitive PM motor for hybrid electric vehicle traction applications. The program has developed a set of performance targets for the type of traction machine desired. The short-path approach entails a comprehensive design effort focusing on the IPM machine and meeting the performance targets. The selection of the IPM machine reflects industry's confidence in this market-proven design that exhibits a power density surpassed by no other machine design.

  10. NETL F 451.1/1-1, Categorical Exclusion Designation Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of four pre-identified toolkit items: SorbentFitSolventFit, Process Models, FOQUS and ALAMO. Digitally signed by STEVEN SEACHMAN DN: cUS, oU.S. Government, ouDepartment of...

  11. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    simulation (1) design (1) hpc (1) implementation (1) knowledge management and ... toolkit : a tool for bridging the architecturalmicroarchitectural evaluation gap. ...

  12. Conceptual Safety Design RM

    Office of Environmental Management (EM)

    Area Identifier Safety Design Strategy SD Hazards Identification & Control Selection HI Conceptual Safety Design Report CR Risks to Project Safety Decisions SR Safety Design...

  13. PM Motor Parametric Design Analyses for a Hybrid Electric Vehicle Traction Drive Application

    SciTech Connect (OSTI)

    Staunton, R.H.

    2004-10-11

    The Department of Energy's (DOE) Office of FreedomCAR (Cooperative Automotive Research) and Vehicle Technologies office has a strong interest in making rapid progress in permanent magnet (PM) machine development. The DOE FreedomCAR program is directing various technology development projects that will advance the technology and hopefully lead to a near-term request for proposals (RFP) for a to-be-determined level of initial production. This aggressive approach is possible because the technology is clearly within reach and the approach is deemed essential, based on strong market demand, escalating fuel prices, and competitive considerations. In response, this study began parallel development paths that included a literature search/review, development and utilization of multiple parametric models, verification of the modeling methodology, development of an interior PM (IPM) machine baseline design, development of alternative machine baseline designs, and cost analyses for several candidate machines. This report summarizes the results of these activities as of September 2004. This report provides background and summary information for recent machine parametric studies and testing programs that demonstrate both the potential capabilities and technical limitations of brushless PM machines (axial gap and radial gap), the IPM machine, the surface-mount PM machines (interior or exterior rotor), induction machines, and switched-reluctance machines. The FreedomCAR program, while acknowledging the progress made by Oak Ridge National Laboratory (ORNL), Delphi, Delco-Remy International, and others in these programs, has redirected efforts toward a ''short path'' to a marketable and competitive PM motor for hybrid electric vehicle (HEV) traction applications. The program has developed a set of performance targets for the type of traction machine desired. The short-path approach entails a comprehensive design effort focusing on the IPM machine and meeting the performance targets. The selection of the IPM machine reflects industry's confidence in this market-proven design that exhibits a high power density.

  14. LEDSGP/DIA-Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Search for Tools Find resources to develop strategies for: Economic growth Reduced poverty Increased jobs Improved energy access Enhanced health Other sustainable developments...

  15. Land Use Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Evaluate public and private sector capacity (e.g., institutional, governance, financial) to support initiatives Assess biophysical and economic potential for these...

  16. Community Wind Toolkit | Open Energy Information

    Open Energy Info (EERE)

    American tribes, universities, cooperatives, or any other local entity seeking to invest in wind energy. Community wind projects may be a single turbine or multi-megawatt...

  17. Performance Based Service Acquisition Toolkit | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FAR 7.105 - Contents of Written Acquisition Plans FAR Subpart 16.505 - Ordering (Performance Based Task Orders) FAR Subpart 36.102 - Policy (PBC Preference) FAR Subpart 37.6 - ...

  18. Pervasive Collaboratorive Computing Environment Jabber Toolkit

    Energy Science and Technology Software Center (OSTI)

    2004-05-15

    PCCE Project background: Our experience in building distributed collaboratories has shown us that there is a growing need for simple, non-intrusive, and flexible ways to stay in touch and work together. Towards this goal we are developing a Pervasive Collaborative Computing Environment (PCCE) within which participants can rendezvous and interact with each other. The PCCE aims to support continuous or ad hoc collaboration, target daily tasks and base connectivity, be easy to use and installmore » across multiple platforms, leverage off of existing components when possible, use standards-based components, and leverage off of Grid services (e.g., security and directory services). A key concept for this work is "incremental trust", which allows the system's "trust" of a given user to change dynamically. PCCE Jabber client software: This leverages Jabber. an open Instant Messaging (IM) protocol and the related Internet Engineering Task Force (IETF) standards "XMPP" and "XMPP-IM" to allow collaborating parties to chat either one-on-one or in "chat rooms". Standard Jabber clients will work within this framework, but the software will also include extensions to a (multi-platform) GUI client (Gaim) for X.509-based security, search, and incremental trust. This software also includes Web interfaces for managing user registration to a Jabber server. PCCE Jabber server software: Extensions to the code, database, and configuration files for the dominant open-source Jabber server, "jabberd". Extensions for search, X.509 security, and incremental trust. Note that the jabberd software is not included as part of this software.« less

  19. Voluntary Initiative: Partnerships Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and their partners, including utilities, state and local governments, non-profit organizations, and for-profit companies, but no matter which sector delivers the program, ...

  20. Bioenergy Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    intended to provide a practical, common methodology for measuring and recording the consumption and supply of biomass energy. It mainly emphasizes traditional bioenergy use, but...

  1. LEDSGP/Transportation Toolkit | Open Energy Information

    Open Energy Info (EERE)

    the six key actions necessary to successfully implement a low emission development strategy for the transportation sector. Icon evaluate system.png Evaluate System LEDS icon...

  2. Wind Working Group Toolkit | Open Energy Information

    Open Energy Info (EERE)

    wind energy costs and impacts to neighbors and the environment. At the same time, the benefits of wind energy and diversity of possible applications have continued to increase....

  3. Cyber Security Audit and Attack Detection Toolkit

    SciTech Connect (OSTI)

    Peterson, Dale

    2012-05-31

    This goal of this project was to develop cyber security audit and attack detection tools for industrial control systems (ICS). Digital Bond developed and released a tool named Bandolier that audits ICS components commonly used in the energy sector against an optimal security configuration. The Portaledge Project developed a capability for the PI Historian, the most widely used Historian in the energy sector, to aggregate security events and detect cyber attacks.

  4. Impact Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Modeling the Global Trade and Environmental Impacts of Biofuel Policies Modified Microgrid Concept for Rural Electrification in Africa NREL-How to Estimate the Economic...

  5. Category:Transportation Toolkits | Open Energy Information

    Open Energy Info (EERE)

    following 135 pages are in this category, out of 135 total. A A Report on Worldwide Hydrogen Bus Demonstrations, 2002-2007 A Review of HOV Lane Performance and Policy Options in...

  6. Market Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Antigua and Barbuda-Regional Implementation Plan for CARICOM's Climate Change Resilience Framework Bahamas-Regional Implementation Plan for CARICOM's Climate Change...

  7. Coordinated Low Emissions Assistance Network toolkit search

    Open Energy Info (EERE)

    Planning Are we missing something? Add a Tool software models, databases, training materials, publications Add a Program climate-related activites or strategies How to search the...

  8. Category:RAPID Toolkit | Open Energy Information

    Open Energy Info (EERE)

    and Permitting RAPIDBulkTransmission RAPIDBulkTransmissionAbout RAPIDBulkTransmissionAir Quality RAPIDBulkTransmissionAlaska RAPIDBulkTransmissionArizona RAPID...

  9. Wind Integration National Dataset (WIND) Toolkit

    Broader source: Energy.gov [DOE]

    For utility companies, grid operators and other stakeholders interested in wind energy integration, collecting large quantities of high quality data on wind energy resources is vitally important....

  10. Low Emission Development Strategies toolkit search

    Open Energy Info (EERE)

    search tools and programs in relation to relevant questions, sector, geography, LEDS methodology stage, analytical needs, and other search terms. The country cloud to the right...

  11. LEDS Toolkit and Framework | Open Energy Information

    Open Energy Info (EERE)

    User Interface: Website, Desktop Application Website: en.openei.orgappsLEDS Cost: Free UN Region: Central Asia, Eastern Asia, South-Eastern Asia, "Pacific" is not in the list...

  12. Workplace Charging Toolkit: Workshop Outreach Presentation Template |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Educate workshop attendees and employers about the benefits of workplace charging and the Challenge by selecting slides from this sample presentation. File General Workshop Outreach Presentation Template File Clean Cities Branded Workshop Outreach Presentation Template More Documents & Publications Workplace Charging Presentation Workplace Charging Challenge Summit 2014: Session 1, Track A Workplace Charging Challenge Overview Factsheet

  13. Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Design Earth-sheltered homes, like the one pictured, are a unique option for efficiently designed homes. No matter the type of home you choose, energy efficient design strategies will save you money and energy. | Photo courtesy of Pamm McFadden/NREL. Earth-sheltered homes, like the one pictured, are a unique option for efficiently designed homes. No matter the type of home you choose, energy efficient design strategies will save you money and energy. | Photo courtesy of Pamm

  14. Preliminary Safety Design RM

    Office of Environmental Management (EM)

    Identifier Safety Guidance & Requirements SG Hazards Identification & Control Selection HI Preliminary Safety Design Report PR Risks to Project Safety Decisions SR Safety Design...

  15. Solar Design Workbook

    SciTech Connect (OSTI)

    Franta, G.; Baylin, F.; Crowther, R.; Dubin, F.; Grace, A., Griffith, J.W.; Holtz, M.; Kutscher, C.; Nordham, D.; Selkowitz, S.; Villecco, M.

    1981-06-01

    This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for the solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.

  16. DOE handbook: Design considerations

    SciTech Connect (OSTI)

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

  17. Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resources Resources The following tools and resources have been useful to DOE programs and partners as they build and maintain their residential energy efficiency programs. Home Energy Pros Online Community Better Buildings Network View Current Issue Past Issues Voluntary Initiative Toolkits Social Media Toolkit Designing Incentives Toolkit Partnerships Toolkit Tools Solution Center Cost-Effectiveness Tool (Beta Version) Home Energy Advisor Publications Peer Exchange Call Summaries Lessons

  18. Final Design RM

    Office of Environmental Management (EM)

    ... Do adequate calculations exist to support the selected design? (ED-2.3) Are vessels and piping systems designed, sized, and qualified to the ASME Boiler and Pressure Vessel Code ...

  19. Energy design for architects

    SciTech Connect (OSTI)

    Shaw, A.

    1989-01-01

    This book contains techniques for energy efficiency in architectural design. Many aspects are covered including: cost; comfort and health; energy use; the design process; and analytical techniques. 202 figs. (JF)

  20. DesignForward

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DesignForward DesignForward The objective of the DesignForward program was to initiate partnerships between DOE centers and vendors to accelerate the research and development of critical technologies needed for exa-scale computing. The principal research areas of interest in the DesignForward program were in the general areas of system integration and interconnect technology. Broadly, the program was looking for proposals in the following areas: System Integration New node technologies, new

  1. System Design Stage

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-05-21

    This chapter addresses translating the user-oriented functional design specifications into a set of technical, computer-oriented system design specifications; and designing the data structure and processes to the level of detail necessary to plan and execute the Programming and Installation Stages.

  2. Foundation Design Handbook

    SciTech Connect (OSTI)

    Carmody, John; Mosiman, Garrett; Handeen, Daniel; Huelman, Patrick; Christian, Jeffery

    2013-10-01

    The purpose of this handbook is to provide information that will enable designers, builders, and homeowners to understand foundation design problems and solutions. The foundation of a house is a somewhat invisible and sometimes ignored component of the building. It is increasingly evident, however, that attention to good foundation design and construction has significant benefits to the homeowner and the builder, and can avoid some serious future problems. Good foundation design and construction practice means not only insulating to save energy, but also providing effective structural design as well as moisture, termite, and radon control techniques where appropriate.

  3. Conceptual Design RM

    Office of Environmental Management (EM)

    DOE-STD-1189-2008, Integration of Safety into the Design Process, and EM's internal business management practices. The SRP follows the Critical Decision (CD) process and...

  4. Effective Design Strategies

    Broader source: Energy.gov [DOE]

    As described in the Whole Building Design Guide (WBDG), all Federal agencies are required to follow the Guiding Principles for New Construction and Major Renovations, which include considerations...

  5. Rotor Aerodynamic Design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Energy Safety Technologies Facilities Battery ... Integrating Wake Effects into the Design Process Models of ... A free-wake, blade element vortex method is being used for ...

  6. The LCLS Design Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R-593 April 2002 UC-414 Linac Coherent Light Source (LCLS) Conceptual Design Report Published April 2002 Prepared for the Department of Energy under contract number...

  7. ERHIC INTERACTION REGION DESIGN.

    SciTech Connect (OSTI)

    MONTAG,C.PARKER,B.PTITSYN,V.TEPIKIAN,S.WANG,D.WANG,F.

    2003-10-13

    This paper presents the current interaction region design status of the ring-ring version of the electron-ion collider eRHIC (release 2.0).

  8. Core Design Applications

    Energy Science and Technology Software Center (OSTI)

    1995-07-12

    CORD-2 is intended for core desigh applications of pressurized water reactors. The main objective was to assemble a core design system which could be used for simple calculations (such as frequently required for fuel management) as well as for accurate calculations (for example, core design after refueling).

  9. Lighting Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as part of your whole-house design -- an approach for building an energy-efficient home. Indoor Lighting Design When designing indoor lighting for energy efficiency,...

  10. Race to Zero Design Competition Webinar: Housing Design Best...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Race to Zero Design Competition Webinar: Housing Design Best Practices Race to Zero Design Competition Webinar: Housing Design Best Practices November 18, 2014 1:00PM to 2:30PM EST ...

  11. WASTE PACKAGE TRANSPORTER DESIGN

    SciTech Connect (OSTI)

    D.C. Weddle; R. Novotny; J. Cron

    1998-09-23

    The purpose of this Design Analysis is to develop preliminary design of the waste package transporter used for waste package (WP) transport and related functions in the subsurface repository. This analysis refines the conceptual design that was started in Phase I of the Viability Assessment. This analysis supports the development of a reliable emplacement concept and a retrieval concept for license application design. The scope of this analysis includes the following activities: (1) Assess features of the transporter design and evaluate alternative design solutions for mechanical components. (2) Develop mechanical equipment details for the transporter. (3) Prepare a preliminary structural evaluation for the transporter. (4) Identify and recommend the equipment design for waste package transport and related functions. (5) Investigate transport equipment interface tolerances. This analysis supports the development of the waste package transporter for the transport, emplacement, and retrieval of packaged radioactive waste forms in the subsurface repository. Once the waste containers are closed and accepted, the packaged radioactive waste forms are termed waste packages (WP). This terminology was finalized as this analysis neared completion; therefore, the term disposal container is used in several references (i.e., the System Description Document (SDD)) (Ref. 5.6). In this analysis and the applicable reference documents, the term ''disposal container'' is synonymous with ''waste package''.

  12. Rampressor Turbine Design

    SciTech Connect (OSTI)

    Ramgen Power Systems

    2003-09-30

    The design of a unique gas turbine engine is presented. The first Rampressor Turbine engine rig will be a configuration where the Rampressor rotor is integrated into an existing industrial gas turbine engine. The Rampressor rotor compresses air which is burned in a traditional stationary combustion system in order to increase the enthalpy of the compressed air. The combustion products are then expanded through a conventional gas turbine which provides both compressor and electrical power. This in turn produces shaft torque, which drives a generator to provide electricity. The design and the associated design process of such an engine are discussed in this report.

  13. Proposals and Design Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposals and Design Reports Proposals and Design Reports Proposal (1/2/04) Proposal Addendum (29/3/04) Physics Case and Detector Technology Report (12/04) Technical Design Report (7/06) Reviews DOE CD-4 DOE 2008 DOE CD-3b CD-3b Readiness DOE CD-1/2/3a CD-2/3a Readiness CD-1 Readiness PAC Report (4/05) Approvals FNAL PAC Approval: April 15, 2004 DOE Critical Decision 1,2,3a (Performance Baseline, Construction Start) Approval: March 30, 2007 DOE Critical Decision 4 (Project Completion) Approval:

  14. Policies for green design

    SciTech Connect (OSTI)

    Fullerton, D.; Wu, W.

    1998-09-01

    A simple general equilibrium model is used to analyze disposal-content fees, subsidies for recyclable designs, unit-pricing of household disposal, deposit-refund systems, and manufacturer take-back requirements. Firms use primary and recycled inputs to produce output that has two attributes: packaging per unit output, and recyclability. If households pay the social cost of disposal, then they send the right signals to producers to reduce packaging and to design products that can more easily be recycled. If garbage is collected for free, then socially optimum attributes can still be achieved by a tax on producers` use of packaging and subsidy to recyclable designs.

  15. Novel rocket design flight tested

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Novel rocket design flight tested Novel rocket design flight tested Scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that...

  16. System Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System Design System Design This template is used to define the system design PDF icon System Design More Documents & Publications Transition Plan Training Plan Feasibility Study Report Template

  17. Prelminary Design RM

    Office of Environmental Management (EM)

    ... vessels and piping systems designed, sized, and qualified to the ASME Boiler and Pressure Vessel Code and ASME B31.3 code, including over-pressure protection? (ED-2.4) Are the ...

  18. METALS DESIGN HANDBOOK DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    Metals Design Handbook Dear Andy : Enclosed f o r your useinformation is DOE-HTGR-88106, ... * 0 I ELECTRiCAL CLASSIFICATION 7 SUE F 0 - INTI NA I NA I NA I APPROVAL PREPARED ...

  19. Subsea HIPPS design procedure

    SciTech Connect (OSTI)

    Aaroe, R.; Lund, B.F.; Onshus, T.

    1995-12-31

    The paper is based on a feasibility study investigating the possibilities of using a HIPPS (High Integrity Pressure Protection System) to protect a subsea pipeline that is not rated for full wellhead shut-in pressure. The study was called the Subsea OPPS Feasibility Study, and was performed by SINTEF, Norway. Here, OPPS is an acronym for Overpressure Pipeline Protection System. A design procedure for a subsea HIPPS is described, based on the experience and knowledge gained through the ``Subsea OPPS Feasibility Study``. Before a subsea HIPPS can be applied, its technical feasibility, reliability and profitability must be demonstrated. The subsea HIPPS design procedure will help to organize and plan the design activities both with respect to development and verification of a subsea HIPPS. The paper also gives examples of how some of the discussed design steps were performed in the Subsea OPPS Feasibility Study. Finally, further work required to apply a subsea HIPPS is discussed.

  20. Seismic Design Expectations Report

    Office of Environmental Management (EM)

    ldg. 3019 60% rned from this r ule. ) Post Ope design review review have be eration w as part een Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review...

  1. Advanced Energy Design Guides

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    way to infuence above-code exemplary energy performance in commercial buildings is to provide architects, engineers, and other design practitioners prescriptive guidance that indicates, measure by measure, how to do it. To this end, the U.S. Department of Energy (DOE) actively supports development of a series of AEDGs- publications designed to provide recommendations for achieving 30 to 50 percent energy savings over the minimum code requirements of ANSI/ASHRAE/ IESNA Standard 90.1-1999. AEDGs

  2. Center for Inverse Design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inverse Design EFRC Director: Alex Zunger Lead Institution: National Renewable Energy Laboratory Mission: Achieve the grand challenge of materials and nanostructures by design: Given the desired, target property, find the structure/configuration that has it, and then make the material. Historically, the development of new materials for technological applications has been based to a large extent on trial-and-error searches or accidental discoveries. This pattern is exemplified not only by the

  3. Designated Team Leader

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Designated Team Leader Each user project is coordinated by a Designated Team Leader (DTL) who may also be the Principal Investigator (PI). The DTL must provide details of all equipment, including hazardous and radioactive materials, to be brought onsite during an experiment. The DTL must complete any required Integration Work Sheet (IWS) prior to the experiment. The DTL will provide all necessary guidance and supervision to his/her experimental team. It is the responsibility of the DTL to ensure

  4. Designing a Benchmarking Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Designing a Benchmarking Plan 1 DRAFT -- February 2013 DESIGNING A BENCHMARKING PLAN Introduction This guide provides a framework for developing an internal benchmarking plan. The outline walks through the various stages of the benchmarking planning process, providing tips and resources to help support organizations at each stage. Not all organizations will choose to implement each stage; however, each section is useful for consideration. 1. Establish the Goal for Benchmarking 2. Secure Buy-in

  5. Design documentation: Krypton encapsulation preconceptual design

    SciTech Connect (OSTI)

    Knecht, D.A.

    1994-10-01

    US EPA regulations limit the release of Krypton-85 to the environment from commercial facilities after January 1, 1983. In order to comply with these regulations, Krypton-85, which would be released during reprocessing of commercial nuclear fuel, must be collected and stored. Technology currently exists for separation of krypton from other inert gases, and for its storage as a compressed gas in steel cylinders. The requirements, which would be imposed for 100-year storage of Krypton-85, have led to development of processes for encapsulation of krypton within a stable solid matrix. The objective of this effort was to provide preconceptual engineering designs, technical evaluations, and life cycle costing data for comparison of two alternate candidate processes for encapsulation of Krypton-85. This report has been prepared by The Ralph M. Parsons Company for the US Department of Energy.

  6. Advanced solar panel designs

    SciTech Connect (OSTI)

    Ralph, E.L.; Linder, E.

    1995-10-01

    This paper describes solar cell panel designs that utilize new high efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

  7. Silo Storage Preconceptual Design

    SciTech Connect (OSTI)

    Stephanie L. Austad; Patrick W. Bragassa; Kevin M Croft; David S Ferguson; Scott C Gladson; Annette L Shafer; John H Weathersby

    2012-09-01

    The National Nuclear Security Administration (NNSA) has a need to develop and field a low-cost option for the long-term storage of a variety of radiological material. The storage option’s primary requirement is to provide both environmental and physical protection of the materials. Design criteria for this effort require a low initial cost and minimum maintenance over a 50-year design life. In 1999, Argonne National Laboratory-West was tasked with developing a dry silo storage option for the BN-350 Spent Fuel in Aktau Kazakhstan. Argon’s design consisted of a carbon steel cylinder approximately 16 ft long, 18 in. outside diameter and 0.375 in. wall thickness. The carbon steel silo was protected from corrosion by a duplex coating system consisting of zinc and epoxy. Although the study indicated that the duplex coating design would provide a design life well in excess of the required 50 years, the review board was concerned because of the novelty of the design and the lack of historical use. In 2012, NNSA tasked Idaho National Laboratory (INL) with reinvestigating the silo storage concept and development of alternative corrosion protection strategies. The 2012 study, “Silo Storage Concepts, Cathodic Protection Options Study” (INL/EST-12-26627), concludes that the option which best fits the design criterion is a passive cathotic protection scheme, consisting of a carbon steel tube coated with zinc or a zinc-aluminum alloy encapsulated in either concrete or a cement grout. The hot dipped zinc coating option was considered most efficient, but the flame-sprayed option could be used if a thicker zinc coating was determined to be necessary.

  8. Designing tomorrow's warheads -- today

    SciTech Connect (OSTI)

    Schneider, D.P.

    1988-03-15

    Until recently, new weapons' warheads were most often an incremental improvement on a previous warhead design. The tools available to the munition designer today, however, allow for a more comprehensive methodology to be employed. The focus of this paper will be a portion of the process of design of an explosively formed projectile (EFP) which uses tantalum as its liner material. Several questions surrounding tantalum's behavior under high strains require answers before such an EFP can be properly designed. The base-technology issues of different material properties will be explored using a three-dimensional finite element code (DYNA3D) and then compared to experiments. State-of-the-art diagnostics are an integral part of this methodology. Predetermined ''flasher block'' contours will provide specific position/time data which will assist in improving and understanding the high explosive equation of state as well as determining the energy imparted to the liner. In turn, this will lead to improved modeling of the liner as it translates along the line of flight. Flash X-ray Radiograph (FXR) will provide clues to axial symmetry, density, and overall time/distance information. This data will also provide answers to the strain rate depencence of the tantalum. Integration of the data from the experiment with the material response models allows post-experiment normalization of the code. This ''normalized'' tool is, finally used in the point design of the warhead.

  9. Water Cooled Mirror Design

    SciTech Connect (OSTI)

    Dale, Gregory E.; Holloway, Michael Andrew; Pulliam, Elias Noel

    2015-03-30

    This design is intended to replace the current mirror setup being used for the NorthStar Moly 99 project in order to monitor the target coupon. The existing setup has limited movement for camera alignment and is difficult to align properly. This proposed conceptual design for a water cooled mirror will allow for greater thermal transfer between the mirror and the water block. It will also improve positioning of the mirror by using flexible vacuum hosing and a ball head joint capable of a wide range of motion. Incorporating this design into the target monitoring system will provide more efficient cooling of the mirror which will improve the amount of diffraction caused by the heating of the mirror. The process of aligning the mirror for accurate position will be greatly improved by increasing the range of motion by offering six degrees of freedom.

  10. FATIGUE DESIGN CURVES FOR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FATIGUE DESIGN CURVES FOR 6061-T6 ALUMINUM* G . T . Yahr Engineering Technology Division Oak Ridge National Laboratory Oak Ridge, Tennessee 37831-8051 ABSTRACT A request has been made to the ASME Boiler and Pressure Vessel Committee that 6061-T6 aluminum be approved for use in the construction of Class 1 welded nuclear vessels so it can be used for the pressure vessel of the Advanced Neutron Source research reactor. Fatigue design curves with and without mean stress effects have been proposed. A

  11. Remote Systems Design & Deployment

    SciTech Connect (OSTI)

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNLs experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNLs work experiences, and the work of others in the national laboratory complex.

  12. Fire protection design criteria

    SciTech Connect (OSTI)

    1997-03-01

    This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, national Fire Protection Association Codes and Standards, and any other applicable DOE construction criteria. This Standard, along with other delineated criteria, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  13. V-200: Apache Struts DefaultActionMapper Redirection and OGNL Security Bypass Vulnerabilities

    Broader source: Energy.gov [DOE]

    The vulnerabilities can be exploited by malicious people to conduct spoofing attacks and bypass certain security restrictions

  14. V-200: Apache Struts DefaultActionMapper Redirection and OGNL...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    tcher.mapper.DefaultActionMapper) can be exploited to e.g. inject and execute arbitrary Java code via OGNL (Object-Graph Navigation Language) expressions. IMPACT: Security Bypass...

  15. Good, Better, Best: Designing a Designation Program for Solar | Department

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy Good, Better, Best: Designing a Designation Program for Solar Good, Better, Best: Designing a Designation Program for Solar December 4, 2012 - 4:00pm Addthis The Energy Department is gathering input on solar designation programs that could one day help consumers recognize the best products and services that the solar industry has to offer. | Photo by Dennis Schroeder/NREL. The Energy Department is gathering input on solar designation programs that could one day help consumers

  16. Wood energy system design

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This handbook, Wood Energy System Design, was prepared with the support of the Council of Great Lakes Governors and the US Department of Energy. It contains: wood fuel properties; procurement; receiving, handling, and storage; combustion; gasification; emission control; electric power generation and cogeneration; and case studies. (JF)

  17. FHR Generic Design Criteria

    SciTech Connect (OSTI)

    Flanagan, G.F.; Holcomb, D.E.; Cetiner, S.M.

    2012-06-15

    The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC)based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

  18. Tool and Fixture Design

    SciTech Connect (OSTI)

    Graham, Mark W.

    2015-07-28

    In a manufacturing process, a need is identified and a product is created to fill this need. While design and engineering of the final product is important, the tools and fixtures that aid in the creation of the final product are just as important, if not more so. Power supplies assembled at the TA-55 PF-5 have been designed by an excellent engineering team. The task in PF-5 now is to ensure that all steps of the assembly and manufacturing process can be completed safely, reliably, and in a quality repeatable manner. One of these process steps involves soldering fine wires to an electrical connector. During the process development phase, the method of soldering included placing the power supply in a vice in order to manipulate it into a position conducive to soldering. This method is unacceptable from a reliability, repeatability, and ergonomic standpoint. To combat these issues, a fixture was designed to replace the current method. To do so, a twelve step engineering design process was used to create the fixture that would provide a solution to a multitude of problems, and increase the safety and efficiency of production.

  19. Designing a Benchmarking Plan

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy Office of Energy Efficiency and Renewable Energy (EERE) Weatherization and Intergovernmental Program (WIP) Solution Center document about how state and local governments, Indian tribes, and overseas U.S. territories can design a plan to benchmark the energy consumption in public buildings.

  20. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... separations plant. A SafeSepss IPSC 'toolkit' is in development to enable the integration of separation process modules and safeguards tools into the design process by providing ...

  1. The SEP/EECBG Technical Assistance Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... workforce development eere.energy.gov Policy Toolkits Design Framework Decision Frameworks will provide guidance to users, Residential ex.: Policies to Consider Develop a ...

  2. Ventuno Design | Open Energy Information

    Open Energy Info (EERE)

    Ventuno Design Jump to: navigation, search Name: Ventuno Design Place: Lower Saxony, Germany Zip: 49767 Sector: Wind energy Product: German-based wind farm developer with...

  3. Residential Retrofit Program Design Guide

    Broader source: Energy.gov [DOE]

    This Residential Retrofit Program Design Guide focuses on the key elements and design characteristics of building and maintaining a successful residential retrofit program.

  4. Achromatic Interaction Point Design

    SciTech Connect (OSTI)

    Guimei Wang,, Yaroslav Derbenev, S.Alex Bogacz, P. Chevtsov, Andre Afanaciev, Charles Ankenbrandt, Valentin Ivanov, Rolland P. Johnson

    2009-05-01

    Designers of high-luminosity energy-frontier muon colliders must provide strong beam focusing in the interaction regions. However, the construction of a strong, aberration-free beam focus is difficult and space consuming, and long straight sections generate an off-site radiation problem due to muon decay neutrinos that interact as they leave the surface of the earth. Without some way to mitigate the neutrino radiation problem, the maximum c.m. energy of a muon collider will be limited to about 3.5 TeV. A new concept for achromatic low beta design is being developed, in which the interaction region telescope and optical correction elements, are installed in the bending arcs. The concept, formulated analytically, combines space economy, a preventative approach to compensation for aberrations, and a reduction of neutrino flux concentration. An analytical theory for the aberration-free, low beta, spatially compact insertion is being developed.

  5. Thermionic Reactor Design Studies

    SciTech Connect (OSTI)

    Schock, Alfred

    1994-08-01

    Paper presented at the 29th IECEC in Monterey, CA in August 1994. The present paper describes some of the author's conceptual designs and their rationale, and the special analytical techniques developed to analyze their (thermionic reactor) performance. The basic designs, first published in 1963, are based on single-cell converters, either double-ended diodes extending over the full height of the reactor core or single-ended diodes extending over half the core height. In that respect they are similar to the thermionic fuel elements employed in the Topaz-2 reactor subsequently developed in the Soviet Union, copies of which were recently imported by the U.S. As in the Topaz-2 case, electrically heated steady-state performance tests of the converters are possible before fueling.

  6. Rotor Aerodynamic Design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aerodynamic Design - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  7. NRT preliminary design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    preliminary design - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  8. Slurry reactor design studies

    SciTech Connect (OSTI)

    Fox, J.M.; Degen, B.D.; Cady, G.; Deslate, F.D.; Summers, R.L. ); Akgerman, A. ); Smith, J.M. )

    1990-06-01

    The objective of these studies was to perform a realistic evaluation of the relative costs of tublar-fixed-bed and slurry reactors for methanol, mixed alcohols and Fischer-Tropsch syntheses under conditions where they would realistically be expected to operate. The slurry Fischer-Tropsch reactor was, therefore, operated at low H{sub 2}/CO ratio on gas directly from a Shell gasifier. The fixed-bed reactor was operated on 2.0 H{sub 2}/CO ratio gas after adjustment by shift and CO{sub 2} removal. Every attempt was made to give each reactor the benefit of its optimum design condition and correlations were developed to extend the models beyond the range of the experimental pilot plant data. For the methanol design, comparisons were made for a recycle plant with high methanol yield, this being the standard design condition. It is recognized that this is not necessarily the optimum application for the slurry reactor, which is being proposed for a once-through operation, coproducing methanol and power. Consideration is also given to the applicability of the slurry reactor to mixed alcohols, based on conditions provided by Lurgi for an Octamix{trademark} plant using their standard tubular-fixed reactor technology. 7 figs., 26 tabs.

  9. GEM Technical Design Report

    SciTech Connect (OSTI)

    Not Available

    1993-07-31

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  10. FEMP Designated Product: Lavatory Faucets

    Broader source: Energy.gov [DOE]

    FEMP suspended its product designation and purchasing specification for commercial faucets until further notice.

  11. Control system design method

    DOE Patents [OSTI]

    Wilson, David G.; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  12. Ecological Communities by Design

    SciTech Connect (OSTI)

    Fredrickson, Jim K.

    2015-06-25

    In synthetic ecology, a nascent offshoot of synthetic biology, scientists aim to design and construct microbial communities with desirable properties. Such mixed populations of microorganisms can simultaneously perform otherwise incompatible functions. Compared with individual organisms, they can also better resist losses in function as a result of environmental perturbation or invasion by other species. Synthetic ecology may thus be a promising approach for developing robust, stable biotechnological processes, such as the conversion of cellulosic biomass to biofuels. However, achieving this will require detailed knowledge of the principles that guide the structure and function of microbial communities.

  13. Preliminary PBFA II design

    SciTech Connect (OSTI)

    Johnson, D. L.; VanDevender, J. P.; Martin, T. H.

    1980-01-01

    The upgrade of Sandia National Laboratories particle beam fusion accelerator, PBFA I, to PBFA II presents several interesting and challenging pulsed power design problems. PBFA II requires increasing the PBFA I output parameters from 2 MV, 30 TW, 1 MJ to 4 MV, 100 TW, 3.5 MJ with the constraint of using much of the same PBFA I hardware. The increased PBFA II output will be obtained by doubling the number of modules (from 36 to 72), increasing the primary energy storage (from 4 MJ to 15 MJ), lowering the pulse forming line (PFL) output impedance, and adding a voltage doubling network.

  14. Lighting Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Lighting Design Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of

  15. Race to Zero Design Competition Webinar: Housing Design Best Practices |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Race to Zero Design Competition Webinar: Housing Design Best Practices Race to Zero Design Competition Webinar: Housing Design Best Practices November 18, 2014 1:00PM to 2:30PM EST Thinking about joining the 2015 Race to Zero to showcase your university team's skill and commitment to designing market-ready zero energy ready homes? Join Sam Rashkin, chief architect of the DOE Building Technologies Office, as he talks about tried-and-true strategies to design technically

  16. CONCEPTUAL DESIGN REPORT

    SciTech Connect (OSTI)

    ROBINSON,K.

    2006-12-31

    Brookhaven National Laboratory has prepared a conceptual design for a world class user facility for scientific research using synchrotron radiation. This facility, called the ''National Synchrotron Light Source II'' (NSLS-II), will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility. Together these will enable the study of material properties and functions with a spatial resolution of {approx}1 nm, an energy resolution of {approx}0.1 meV, and the ultra high sensitivity required to perform spectroscopy on a single atom. The overall objective of the NSLS-II project is to deliver a research facility to advance fundamental science and have the capability to characterize and understand physical properties at the nanoscale, the processes by which nanomaterials can be manipulated and assembled into more complex hierarchical structures, and the new phenomena resulting from such assemblages. It will also be a user facility made available to researchers engaged in a broad spectrum of disciplines from universities, industries, and other laboratories.

  17. PHENIX Conceptual Design Report

    SciTech Connect (OSTI)

    Nagamiya, Shoji; Aronson, Samuel H.; Young, Glenn R.; Paffrath, Leo

    1993-01-29

    The PHENIX Conceptual Design Report (CDR) describes the detector design of the PHENIX experiment for Day-1 operation at the Relativistic Heavy Ion Collider (RHIC). The CDR presents the physics capabilities, technical details, cost estimate, construction schedule, funding profile, management structure, and possible upgrade paths of the PHENIX experiment. The primary goals of the PHENIX experiment are to detect the quark-gluon plasma (QGP) and to measure its properties. Many of the potential signatures for the QGP are measured as a function of a well-defined common variable to see if any or all of these signatures show a simultaneous anomaly due to the formation of the QGP. In addition, basic quantum chromodynamics phenomena, collision dynamics, and thermodynamic features of the initial states of the collision are studied. To achieve these goals, the PHENIX experiment measures lepton pairs (dielectrons and dimuons) to study various properties of vector mesons, such as the mass, the width, and the degree of yield suppression due to the formation of the QGP. The effect of thermal radiation on the continuum is studied in different regions of rapidity and mass. The e[mu] coincidence is measured to study charm production, and aids in understanding the shape of the continuum dilepton spectrum. Photons are measured to study direct emission of single photons and to study [pi][sup 0] and [eta] production. Charged hadrons are identified to study the spectrum shape, production of antinuclei, the [phi] meson (via K[sup +]K[sup [minus

  18. Thermionic Reactor Design Studies

    SciTech Connect (OSTI)

    Schock, Alfred

    1994-06-01

    During the 1960's and early 70's the author performed extensive design studies, analyses, and tests aimed at thermionic reactor concepts that differed significantly from those pursued by other investigators. Those studies, like most others under Atomic Energy Commission (AEC and DOE) and the National Aeronautics and Space Administration (NASA) sponsorship, were terminated in the early 1970's. Some of this work was previously published, but much of it was never made available in the open literature. U.S. interest in thermionic reactors resumed in the early 80's, and was greatly intensified by reports about Soviet ground and flight tests in the late 80's. This recent interest resulted in renewed U.S. thermionic reactor development programs, primarily under Department of Defense (DOD) and Department of Energy (DOE) sponsorship. Since most current investigators have not had an opportunity to study all of the author's previous work, a review of the highlights of that work may be of value to them. The present paper describes some of the author's conceptual designs and their rationale, and the special analytical techniques developed to analyze their performance. The basic designs, first published in 1963, are based on single-cell converters, either double-ended diodes extending over the full height of the reactor core or single-ended diodes extending over half the core height. In that respect they are similar to the thermionic fuel elements employed in the Topaz-2 reactor subsequently developed in the Soviet Union, copies of which were recently imported by the U.S. As in the Topaz-2 case, electrically heated steady-state performance tests of the converters are possible before fueling. Where the author's concepts differed from the later Topaz-2 design was in the relative location of the emitter and the collector. Placing the fueled emitter on the outside of the cylindrical diodes permits much higher axial conductances to reduce ohmic losses in the electrodes of full-core-height diodes. Moreover, placing the fuel on the outside of the diode makes possible reactors with much higher fuel volume fractions, which enable power-flattened fast reactors scalable to very low power levels without the need for life-limiting hydride moderators or the use of efficiency-limiting driver fuel. In addition, with the fuel on the outside its swelling does not increase the emitter diameter or reduce the interelectrode gap. This should permit long lifetimes even with closer spacings, which can significantly improve the system efficiences. This was confirmed by coupled neutronic, thermal, thermionic, and electrical system analyses - some of which are presented in this paper - and by subsequent experiments. A companion paper presented next describes the fabrication and testing of full-scale converter elements, both fueled and unfueled, and summarizes the test results obtained. There is a duplicate copy in the file.

  19. Production Target Design Report

    SciTech Connect (OSTI)

    Woloshun, Keith Albert; Dale, Gregory E.; Olivas, Eric Richard

    2015-07-28

    The Northstar 99Mo production target, a cylindrical length of 100Mo rod, has evolved considerably since its first conception.The cylinder was very early sliced into disks to increase the heat transfer area, first to 1 mm thick disks then to the current 0.5 mm thick.The coolant was changed early in the target development from water to helium to eliminate corrosion and dissolution.The diameter has increased from initially 6 mm to 12 mm, the current diameter of the test target now at ANL, to nominally 28 mm (26-30.6 mm, depending upon optimal beam spot size and shape).The length has also changed to improve the production to cost ratio, so now the target is nominally 41 mm long (excluding coolant gaps between disks), and irradiated on both ends.This report summarizes the current status of the plant target design.

  20. Optimized design for PIGMI

    SciTech Connect (OSTI)

    Hansborough, L.; Hamm, R.; Stovall, J.; Swenson, D.

    1980-01-01

    PIGMI (Pion Generator for Medical Irradiations) is a compact linear proton accelerator design, optimized for pion production and cancer treatment use in a hospital environment. Technology developed during a four-year PIGMI Prototype experimental program allows the design of smaller, less expensive, and more reliable proton linacs. A new type of low-energy accelerating structure, the radio-frequency quadrupole (RFQ) has been tested; it produces an exceptionally good-quality beam and allows the use of a simple 30-kV injector. Average axial electric-field gradients of over 9 MV/m have been demonstrated in a drift-tube linac (DTL) structure. Experimental work is underway to test the disk-and-washer (DAW) structure, another new type of accelerating structure for use in the high-energy coupled-cavity linac (CCL). Sufficient experimental and developmental progress has been made to closely define an actual PIGMI. It will consist of a 30-kV injector, and RFQ linac to a proton energy of 2.5 MeV, a DTL linac to 125 MeV, and a CCL linac to the final energy of 650 MeV. The total length of the accelerator is 133 meters. The RFQ and DTL will be driven by a single 440-MHz klystron; the CCL will be driven by six 1320-MHz klystrons. The peak beam current is 28 mA. The beam pulse length is 60 ..mu..s at a 60-Hz repetition rate, resulting in a 100-..mu..A average beam current. The total cost of the accelerator is estimated to be approx. $10 million.

  1. Authorizing Official Designated Representative (AODR) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Designated Representative (AODR) Authorizing Official Designated Representative (AODR) student-849822960720.jpg The Authorizing Official Designated Representative (AODR) provides...

  2. DOE Designated User Facilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Designated User Facilities DOE Designated User Facilities DOE Designated User Facilities Sept 30 2015 More Documents & Publications Microsoft Word - DesignatedUserFacilitiesApri...

  3. Extreme Scale Computing, Co-design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Science, Computing, Applied Math Extreme Scale Computing, Co-design Extreme Scale Computing, Co-design Computational co-design may facilitate revolutionary designs ...

  4. We Want It All - Designers

    Energy Savers [EERE]

    We Want It All - Designers Chip Israel MIES, FIALD, LEED AP, LC cisrael@lightingdesignalliance.com We Don't Want It - Glare LED's Are a Tool It's Still bout the Design. Education...

  5. ARIA Cell Solenoid Design Considerations

    SciTech Connect (OSTI)

    Schulze, Martin E.

    2015-05-20

    Detailed schematics of the structure of the preliminary ARIA solenoid cell design including overhead and cross section views and dimensions.

  6. ORISE: Instructional Design and Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Instructional Design and Development The Oak Ridge Institute for Science and Education (ORISE) works with government agencies and organizations to create customized training and instructional design programs, from traditional classroom teaching to online education. ORISE uses a multi-step process to define the instructional design and development needs. Our process includes: Defining the target audience and objectives Designing and developing the program and materials Piloting, delivering and

  7. Residential Retrofit Design Guide Overview

    Broader source: Energy.gov [DOE]

    This webinar covered the Residential Retrofit Program Design Guide and its elements, including assess, plan, implement, and evaluate.

  8. NUCLEAR REACTOR CORE DESIGN

    DOE Patents [OSTI]

    Mahlmeister, J.E.; Peck, W.S.; Haberer, W.V.; Williams, A.C.

    1960-03-22

    An improved core design for a sodium-cooled, graphitemoderated nuclear reactor is described. The improved reactor core comprises a number of blocks of moderator material, each block being in the shape of a regular prism. A number of channels, extending the length of each block, are disposed around the periphery. When several blocks are placed in contact to form the reactor core, the channels in adjacent blocks correspond with each other to form closed conduits extending the length of the core. Fuel element clusters are disposed in these closed conduits, and liquid coolant is forced through the annulus between the fuel cluster and the inner surface of the conduit. In a preferred embodiment of the invention, the moderator blocks are in the form of hexagonal prisms with longitudinal channels cut into the corners of the hexagon. The main advantage of an "edge-loaded" moderator block is that fewer thermal neutrons are absorbed by the moderator cladding, as compared with a conventional centrally loaded moderator block.

  9. ERHIC Conceptual Design

    SciTech Connect (OSTI)

    Ptitsyn,V.; Beebe-Wang,J.; Ben-Zvi,I.; Fedotov, A.; Fischer, W.; Hao, Y.; Kayran, D.; Litvinenko, V.N.; MacKay, W.W.; Montag, C.; Pozdeyev, E.; Roser, T.; Trbojevic, D.; Tsoupas, N.; Tsentalovich, E.

    2008-08-25

    The conceptual design of the high luminosity electron-ion collider, eRHIC, is presented. The goal of eRHIC is to provide collisions of electrons (and possibly positrons) with ions and protons at the center-of-mass energy range from 25 to 140 GeV, and with luminosities exceeding 10{sup 33} cm{sup -2} s{sup -1}. A considerable part of the physics program is based on polarized electrons, protons and He3 ions with high degree of polarization. In eRHIC electron beam will be accelerated in an energy recovery linac. Major R&D items for eRHIC include the development of a high intensity polarized electron source, studies of various aspects of energy recovery technology for high power beams and the development of compact magnets for recirculating passes. In eRHIC scheme the beam-beam interaction has several specific features, which have to be thoroughly studied. In order to maximize the collider luminosity, several upgrades of the existing RHIC accelerator are required. Those upgrades may include the increase of intensity as well as transverse and longitudinal cooling of ion and proton beams.

  10. Advances in geotectural design

    SciTech Connect (OSTI)

    Boyer, L.L. (ed.)

    1986-01-01

    Although the price of oil dropped well below $20 US earlier this year from a previous high above $35 US, the interest and participation shown in this conference does not seem to have been materially affected. Perhaps energy, although not unimportant, is no longer the driving force behind the continuing development and exploration of the earth shelter idiom in architecture. Rather, the thrust of most papers seems to seek an understanding of the adaptation of earth shelter into varied types of settings, especially urban applications, and also the understanding of the physical phenomenon of how an earth shelter works. The paper have been grouped into three basic categories with several subsections in each category. First, vernacular approaches are documented from the viewpoint of habitation, and followed by other types of utilization. Then, recent theoretical developments are reviewed in terms of materials, occupant studies, and heat transfer and air flow analyses. The final section deals with contemporary practice, where design concepts and case studies are presented, followed by building systems and urban planning aspects. All 54 papers have been abstracted separately for inclusion on the Energy Data Base.

  11. Conceptual design summary

    SciTech Connect (OSTI)

    Peretz, F.J.

    1992-09-01

    The Advanced Neutron Source (ANS) is a new basic and applied research facility based on a powerful steady-state research reactor that provides beams of neutrons for measurements and experiments in the fields of materials science and engineering, biology, chemistry, materials analysis, and nuclear science. The useful neutron flux for these experiments will be at least five times, and in some cases twenty times, more than is available at the world`s best existing facilities. In addition, ANS will provide irradiation capabilities for the production of radioisotopes for medical applications, research, and industry and facilities for materials irradiation testing. The need for a new steady-state neutron research facility in the United States was emphasized by the 1984 National Academy Report and confirmed by the Department of Energy`s (DOE`s) Energy Research Advisory Board in 1985. These studies defined a minimum thermal neutron flux requirement of 5 {times} 10{sup 19} m{sup {minus}2} {center_dot} s{sup {minus}1}. The National Steering Committee for an Advanced Neutron Source, with representation from the major fields of science that will use the facility, was established in 1986 and has continued to define the performance requirements and instrument layouts needed by the user community. To minimize technical risks and safety issues, the project adopted a policy of not relying upon new inventions to meet the minimum performance criteria, and the design presented in this report is built on technologies already used in other facilities and development programs: for example, the involute aluminum-clad fuel plates common to HFIR and ILL and the uranium silicide fuel developed in DOE`s Reduced Enrichment for Research and Test Reactors program and tested in reactors worldwide. At the same time, every state-of-the-art technique has been implemented to optimize neutron beam delivery at the experiments.

  12. Conceptual design summary

    SciTech Connect (OSTI)

    Peretz, F.J.

    1992-09-01

    The Advanced Neutron Source (ANS) is a new basic and applied research facility based on a powerful steady-state research reactor that provides beams of neutrons for measurements and experiments in the fields of materials science and engineering, biology, chemistry, materials analysis, and nuclear science. The useful neutron flux for these experiments will be at least five times, and in some cases twenty times, more than is available at the world's best existing facilities. In addition, ANS will provide irradiation capabilities for the production of radioisotopes for medical applications, research, and industry and facilities for materials irradiation testing. The need for a new steady-state neutron research facility in the United States was emphasized by the 1984 National Academy Report and confirmed by the Department of Energy's (DOE's) Energy Research Advisory Board in 1985. These studies defined a minimum thermal neutron flux requirement of 5 {times} 10{sup 19} m{sup {minus}2} {center dot} s{sup {minus}1}. The National Steering Committee for an Advanced Neutron Source, with representation from the major fields of science that will use the facility, was established in 1986 and has continued to define the performance requirements and instrument layouts needed by the user community. To minimize technical risks and safety issues, the project adopted a policy of not relying upon new inventions to meet the minimum performance criteria, and the design presented in this report is built on technologies already used in other facilities and development programs: for example, the involute aluminum-clad fuel plates common to HFIR and ILL and the uranium silicide fuel developed in DOE's Reduced Enrichment for Research and Test Reactors program and tested in reactors worldwide. At the same time, every state-of-the-art technique has been implemented to optimize neutron beam delivery at the experiments.

  13. Sandia National Laboratories: Research: High Consequence, Automation, &

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Robotics: EOD Decision Support Tools Explosive Ordnance Disposal (EOD) Decision Support Tools X-ray Toolkit X-ray Toolkit (XTK) X-ray Toolkit (XTK) is a software program developed by Sandia National Laboratories for the United States Government under funding from the National Nuclear Security Administration (NNSA) and the Technical Support Working Group. XTK is a radiography planning, acquisition, processing, and analysis program designed specifically for explosive ordnance disposal (EOD)

  14. Rock mechanics design in mining and tunneling

    SciTech Connect (OSTI)

    Bieniawski, Z.T.

    1984-01-01

    This book introduces the design process as applied to rock mechanics aspects of underground mining and tunneling. Topics covered include a historical perspective, the design process in engineering, empirical methods of design, observational methods of design, and guided design.

  15. Naval Waste Package Design Report

    SciTech Connect (OSTI)

    M.M. Lewis

    2004-03-15

    A design methodology for the waste packages and ancillary components, viz., the emplacement pallets and drip shields, has been developed to provide designs that satisfy the safety and operational requirements of the Yucca Mountain Project. This methodology is described in the ''Waste Package Design Methodology Report'' Mecham 2004 [DIRS 166168]. To demonstrate the practicability of this design methodology, four waste package design configurations have been selected to illustrate the application of the methodology. These four design configurations are the 21-pressurized water reactor (PWR) Absorber Plate waste package, the 44-boiling water reactor (BWR) waste package, the 5-defense high-level waste (DHLW)/United States (U.S.) Department of Energy (DOE) spent nuclear fuel (SNF) Co-disposal Short waste package, and the Naval Canistered SNF Long waste package. Also included in this demonstration is the emplacement pallet and continuous drip shield. The purpose of this report is to document how that design methodology has been applied to the waste package design configurations intended to accommodate naval canistered SNF. This demonstrates that the design methodology can be applied successfully to this waste package design configuration and support the License Application for construction of the repository.

  16. Asian Co-benefits Partnership (ACP) Toolkit | Open Energy Information

    Open Energy Info (EERE)

    and information to help mainstream climate and developmental co-benefits into decision-making processes in Asia." The Tookit "offers recent publication from ACP member...

  17. LEDSGP/DIA-Toolkit/Tools | Open Energy Information

    Open Energy Info (EERE)

    (LEDS) on country development goals. These resources focus on strategies to reduce poverty, improve health and local environment quality, improve energy and water access,...

  18. NOAA Webinar: The U.S. Climate Resilience Toolkit

    Broader source: Energy.gov [DOE]

    This series is co-sponsored by the NOAA Sectoral Applications Research Program (SARP), US National Integrated Drought Information System (NIDIS), Water Research Foundation, Water Environment...

  19. Greenhouse Gas Inventory Development Toolkit | Open Energy Information

    Open Energy Info (EERE)

    an Application of the EX-Ante Carbon-balance Tool (EX-ACT) Financial and Cost Assessment Model (FICAM) Forest Carbon Index Forest Carbon Portal Forest Monitoring for Action...

  20. File:RAPID Toolkit Flyer.pdf | Open Energy Information

    Open Energy Info (EERE)

    pdf, 2 pages) 2-pg flyer giving an overview of the GRR project File history Click on a datetime to view the file as it appeared at that time. DateTime Thumbnail Dimensions User...

  1. Sustainable Land-use Impact Assessment Toolkit | Open Energy...

    Open Energy Info (EERE)

    public and private sector capacity to support initiatives 2.4. Assess and improve the national GHG inventory and other economic and resource data as needed for LEDS development...

  2. Grid-Connected Renewable Energy Generation Toolkit-Wind | Open...

    Open Energy Info (EERE)

    Agency for International Development Sector: Energy Focus Area: Wind Resource Type: Training materials Website: www.energytoolbox.orggcremod6index.shtml Grid-Connected...

  3. Grid-Connected Renewable Energy Generation Toolkit-Solar | Open...

    Open Energy Info (EERE)

    Agency for International Development Sector: Energy Focus Area: Solar Resource Type: Training materials Website: www.energytoolbox.orggcremod5index.shtml Grid-Connected...

  4. Grid-Connected Renewable Energy Generation Toolkit-Geothermal...

    Open Energy Info (EERE)

    for International Development Sector: Energy Focus Area: Geothermal Resource Type: Training materials Website: www.energytoolbox.orggcremod3index.shtml Grid-Connected...

  5. Grid-Connected Renewable Energy Generation Toolkit-Hydroelectric...

    Open Energy Info (EERE)

    United States Agency for International Development Sector: Energy Resource Type: Training materials Website: www.energytoolbox.orggcremod4index.shtml Grid-Connected...

  6. Energy System and Scenario Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    other technologies. Biomass Biomass Energy Data Book Buildings Buildings Energy Data Book Hydrogen Hydrogen Energy Data Book Marine and Hydrokinetic Technology Marine and...

  7. Technology Cost and Performance Toolkit | Open Energy Information

    Open Energy Info (EERE)

    little attention at the policy level as an important component of a national strategy. Hydrogen U.S. National Hydrogen Energy Roadmap Solar Open PV Project Open PV provides a...

  8. The structural simulation toolkit : a tool for bridging thearchitectu...

    Office of Scientific and Technical Information (OSTI)

    Abstract not provided. Authors: Murphy, Richard. ; Rodrigues, Arun F. ; Kogge, Peter 1 ; Underwood, Keith Douglas + Show Author Affiliations University of Notre Dame Publication ...

  9. LEDSGP/DIA-Toolkit/Factors | Open Energy Information

    Open Energy Info (EERE)

    expanded solar energy, the impact of switching from imported fossil fuels to solar power may improve public health through improved air quality. Environmental Air -...

  10. LEDSGP/DIA-Toolkit/How To | Open Energy Information

    Open Energy Info (EERE)

    may want to improve energy access of rural communities, decrease reliance on imported fossil fuels, or increase jobs. 3. What tools and methodologies are available for impact...

  11. Land-use Scenario Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    and Energy Global Change Assessment Model (GCAM) Dynamic-recursive model GCAM Model Pacific Northwest National Laboratory Resources by Type Tools Click Sort key.JPG to sort by...

  12. Clean Air-Cool Planet Community Toolkit | Open Energy Information

    Open Energy Info (EERE)

    conservation, renewable energy (the resource focuses on wind power, solar power, and methane recovery), green power, transportation, waste, and land-use programs. Each topic is...

  13. File:RAPID Toolkit Flyer.pdf | Open Energy Information

    Open Energy Info (EERE)

    2 pages) 2-pg flyer giving an overview of the GRR project File history Click on a datetime to view the file as it appeared at that time. DateTime Thumbnail Dimensions User...

  14. LEDSGP/Transportation Toolkit/Key Actions/Develop Alternative...

    Open Energy Info (EERE)

    and Plan Prioritize alternative development scenarios based on factors such as economic, environmental, and social benefits & costs, technical & institutional capacity & barriers,...

  15. LEDSGP/Transportation Toolkit/Key Actions/Assess Opportunities...

    Open Energy Info (EERE)

    and Plan Prioritize alternative development scenarios based on factors such as economic, environmental, and social benefits & costs, technical & institutional capacity & barriers,...

  16. LEDSGP/Transportation Toolkit/Key Actions | Open Energy Information

    Open Energy Info (EERE)

    and Plan Prioritize alternative development scenarios based on factors such as economic, environmental, and social benefits & costs, technical & institutional capacity & barriers,...

  17. Template:RegulatoryToolkitTabs | Open Energy Information

    Open Energy Info (EERE)

    source History View New Pages Recent Changes All Special Pages Semantic SearchQuerying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History...

  18. Energy System and Scenario Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    for 215 countries. The statistics include crude oil production, oil consumption, natural gas production and consumption, electricity generation and consumption, primary energy,...

  19. NREL: Wind Research - NREL's WIND Toolkit Provides the Data Needed...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by the numerical model. Barometric pressure, wind speed and direction (at 100 m above ground level), relative humidity, temperature, and air density data are available via an...

  20. LEDSGP/Transportation Toolkit/Strategies/Improve | Open Energy...

    Open Energy Info (EERE)

    petroleum fuels; alternative fuels (such as ethanol, biodiesel, natural gas, and propane; hydrogen fuel-cell systems; and electric rechargeable battery systems. System Level...

  1. LEDSGP/Transportation Toolkit/Strategies/Shift | Open Energy...

    Open Energy Info (EERE)

    petroleum fuels; alternative fuels (such as ethanol, biodiesel, natural gas, and propane; hydrogen fuel-cell systems; and electric rechargeable battery systems. System Level...

  2. LEDSGP/Transportation Toolkit/Strategies/Avoid | Open Energy...

    Open Energy Info (EERE)

    petroleum fuels; alternative fuels (such as ethanol, biodiesel, natural gas, and propane; hydrogen fuel-cell systems; and electric rechargeable battery systems. System Level...

  3. LEDSGP/Transportation Toolkit/Strategies | Open Energy Information

    Open Energy Info (EERE)

    petroleum fuels; alternative fuels (such as ethanol, biodiesel, natural gas, and propane; hydrogen fuel-cell systems; and electric rechargeable battery systems. System Level...

  4. Energy System and Scenario Analysis Toolkit | Open Energy Information

    Open Energy Info (EERE)

    energy statistics for 215 countries. The statistics include crude oil production, oil consumption, natural gas production and consumption, electricity generation and...

  5. USAID Toolkit for Increasing Energy Access | Open Energy Information

    Open Energy Info (EERE)

    Change (UNFCCC), UNEP, United Nations Foundation Sector: Energy Focus Area: Renewable Energy, Energy Efficiency, People and Policy Phase: Evaluate Options, Develop Goals, Prepare...

  6. Hands-on Energy Adaptation Toolkit (HEAT) | Open Energy Information

    Open Energy Info (EERE)

    Management Assistance Program of the World Bank Sector: Energy Focus Area: Renewable Energy Topics: Adaptation, Implementation, Pathways analysis Resource Type: Guidemanual...

  7. Property:TransportToolkit/Regions | Open Energy Information

    Open Energy Info (EERE)

    America + B Bike-Sharing:History, Impacts, Models of Provision, and Future + Global + Biodiesel Handling and Use Guide + Global +, Australia & North America + Bus Rapid Transit...

  8. Renewable Energy Technical Potential Toolkit | Open Energy Information

    Open Energy Info (EERE)

    as suitable for development and applies current technology energy conversion efficiency to the available resource in those areas. As renewable technologies improve...

  9. World Bank Renewable Energy Toolkit | Open Energy Information

    Open Energy Info (EERE)

    of a Monitoring and Evaluation Plan Audit of Solar Home Systems Project Mid-term Review Panel for Solar Home Systems Project Socio-Economic Survey of the Photovoltaic Pilot...

  10. Renewable Energy Technical Potential Toolkit | Open Energy Information

    Open Energy Info (EERE)

    cell would only have one value for solar resource, which represents the annual average solar resource (GHI, for PV analysis) for the entire area covered by the grid cell....

  11. Guidelines and Toolkits for Urban Transport Development in Medium...

    Open Energy Info (EERE)

    from the LEDS Global Partnership. When to Use This Tool While building a low emission strategy for your country's transportation system, this tool is most useful during these...

  12. UNEP Toolkit for Clean Fleet Strategy Development | Open Energy...

    Open Energy Info (EERE)

    strategy for reducing the envrionmental impacts of your fleet. To develop your own fleet strategy you need to follow the steps below. Start with opening the Step by Step action...

  13. LEDSGP/Transportation Toolkit/Training | Open Energy Information

    Open Energy Info (EERE)

    and Programs - Dario Hidalgo, World Resources Institute-EMBARQ Videos and Presentations Alternative Fuels and Advanced Vehicles U.S. Clean Cities TV Clean Cities TV is the...

  14. Toolkit for Public-Private Partnerships in Roads and Highways...

    Open Energy Info (EERE)

    World Bank Sector: Energy Focus Area: Transportation Resource Type: Guidemanual User Interface: Website Website: www.ppiaf.orgppiafsitesppiaf.orgfilesdocuments...

  15. LEDSGP/Transportation Toolkit/Training | Open Energy Information

    Open Energy Info (EERE)

    petroleum consumption in transportation. Car Sharing Robin Chase on Zipcar and her next big idea Robin Chase founded Zipcar, the world's biggest car-sharing business. With...

  16. Afghanistan-NREL Resource Maps and Toolkits | Open Energy Information

    Open Energy Info (EERE)

    partnered with Afghanistan to develop high-resolution wind and solar resource maps and data products for Afghanistan. The data were output in Geographic Information Systems (GIS)...

  17. Transport Activity Measurement Toolkit (TAMT) | Open Energy Informatio...

    Open Energy Info (EERE)

    Latin America and the Caribbean Region Sustainable Development Department Transport Cluster in conjunction with the World Bank's Environment-Climate Change (ENV-CC) Department...

  18. Industrial Ratepayer-Funded SEP Toolkit | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ISO 50001. An independent third party audits each facility to verify its achievements and qualify it at the Silver, Gold, or Platinum level based on energy performance improvement. ...

  19. Highly Asynchronous VisitOr Queue Graph Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-10-01

    HAVOQGT is a C++ framework that can be used to create highly parallel graph traversal algorithms. The framework stores the graph and algorithmic data structures on external memory that is typically mapped to high performance locally attached NAND FLASH arrays. The framework supports a vertex-centered visitor programming model. The frameworkd has been used to implement breadth first search, connected components, and single source shortest path.

  20. Category:LEDSGP Development Impacts Assessment Toolkits | Open...

    Open Energy Info (EERE)

    Model S SEAGA Intermediate Level Handbook SimCLIM Simple Interactive Models for better air quality (SIM-air) Simplified Approach for Estimating Impacts of Electricity Generation...

  1. LEDSGP/Transportation Toolkit/Strategies | Open Energy Information

    Open Energy Info (EERE)

    and dual-fuel vehicles); non-petroleum fuel vehicles (such as natural gas, hydrogen fuel cell, and battery electric vehicles); and vehicle component improvements...

  2. LEDSGP/Transportation Toolkit/Strategies/Shift | Open Energy...

    Open Energy Info (EERE)

    and dual-fuel vehicles); non-petroleum fuel vehicles (such as natural gas, hydrogen fuel cell, and battery electric vehicles); and vehicle component improvements...

  3. LEDSGP/Transportation Toolkit/Strategies/Avoid | Open Energy...

    Open Energy Info (EERE)

    and dual-fuel vehicles); non-petroleum fuel vehicles (such as natural gas, hydrogen fuel cell, and battery electric vehicles); and vehicle component improvements...

  4. LEDSGP/Transportation Toolkit/Strategies/Improve | Open Energy...

    Open Energy Info (EERE)

    and dual-fuel vehicles); non-petroleum fuel vehicles (such as natural gas, hydrogen fuel cell, and battery electric vehicles); and vehicle component improvements...

  5. LEDSGP/Transportation Toolkit/Key Actions/Assess Opportunities...

    Open Energy Info (EERE)

    framework are intended to guide decision makers rather than prescribe a specific methodology. Evaluate the System Assess the current transportation situation in your country or...

  6. LEDSGP/Transportation Toolkit/Key Actions | Open Energy Information

    Open Energy Info (EERE)

    framework are intended to guide decision makers rather than prescribe a specific methodology. Evaluate the System Assess the current transportation situation in your country or...

  7. LEDSGP/Transportation Toolkit/Key Actions/Develop Alternative...

    Open Energy Info (EERE)

    framework are intended to guide decision makers rather than prescribe a specific methodology. Evaluate the System Assess the current transportation situation in your country or...

  8. Information Toolkit for post-2012 climate policies | Open Energy...

    Open Energy Info (EERE)

    Organization: Energy Research Centre of the Netherlands Partner: Brinkman Climate Change Sector: Energy Topics: Co-benefits assessment, Policiesdeployment programs, Pathways...

  9. Model Analysis ToolKit (MATK), Version 0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Version 0 MATK provides basic functionality to facilitate model analysis within the Python computational environment. June 19, 2015 software MATK provides basic functionality to...

  10. Designing for the Active Classroom

    SciTech Connect (OSTI)

    Wilkerson, Andrea M.; Donohue, Amy; Davis, Robert G.

    2015-02-01

    The article discusses trends in classroom design and then transitions to a discussion of the future of the classroom and how the lighting industry needs to be preparing to meet the needs of the future classroom. The OSU Classroom building as an example throughout, first discussing how trends in classroom design were incorporated into the Classroom Building and then discussing how future lighting systems could enhance the Classroom Building, which is a clear departure from the actual lighting design and current technology.

  11. Lighting Design | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. If you're

  12. Biosystems Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biosystems Design Biosystems Design Breakout Session 2: Frontiers and Horizons Session 2-A: Synthetic Biology and the Promise of Biofuels Pablo Rabinowicz, Program Manager, Biosystems Design Program, Biological and Environmental Research (BER), U.S. Department of Energy PDF icon b13_rabinowicz_2-a.pdf More Documents & Publications Biomass 2013 Agenda Before the House Science and Technology Subcommittee on Energy and Environment Briefing: DOE and the Life and Medical Sciences

  13. Automated solar collector installation design

    DOE Patents [OSTI]

    Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

    2014-08-26

    Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives.

  14. ORISE: Instructional Design and Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    customized training and instructional design programs, from traditional classroom teaching to online education. ORISE uses a multi-step process to define the instructional...

  15. Novel rocket design flight tested

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Novel rocket design flight tested Novel rocket design flight tested Scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. October 23, 2014 Rocket flight test at the Energetic Materials Research and Testing Center launch sitE near Socorro, NM. Rocket flight test at the Energetic Materials Research and Testing Center launch sitE near Socorro, NM. Contact Kevin Roark Communications Office (505) 665-9202

  16. Precision Designs | Open Energy Information

    Open Energy Info (EERE)

    Name: Precision Designs Place: Rochester, New York Zip: 14624 Product: Manufacturer of test equipment for fuel cells. Coordinates: 43.1555, -77.616033 Show Map Loading map......

  17. Challenge Home Student Design Competition

    Broader source: Energy.gov [DOE]

    Check out student designs of zero energy ready homes -- homes that are so efficient they can produce as much energy as the use with a renewable energy system.

  18. Novette chain design and performance

    SciTech Connect (OSTI)

    Hunt, J.T.; Speck, D.R.

    1980-12-11

    The design and performance of the Novette laser system, which is a two-beam, two-wavelength (1.05 ..mu.. and 0.53 ..mu..) target irradiation facility using phosphate glass laser chains, are discussed with information on the glass properties, controlling factors in the design selection, and projected performance with varying operating conditions. (LCL)

  19. MINIMARS conceptual design: Final report

    SciTech Connect (OSTI)

    Lee, J.D.

    1986-09-01

    This volume contains the following sections: (1) fueling systems; (2) blanket; (3) alternative blanket concepts; (4) halo scraper/direct converter system study and final conceptual design; (5) heat-transport and power-conversion systems; (6) tritium systems; (7) minimars air detritiation system; (8) appropriate radiological safety design criteria; and (9) cost estimate. (MOW)

  20. Kansas State University: Technical Design Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WIND TURBINE DESIGN REPORT Wildcat Wind Power - Kansas State University 18 April 2014 1 Table of Contents Introduction .................................................................................................................................................. 2 Mechanical Design ........................................................................................................................................ 3 Design Motivations

  1. Visual Design Group | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visual Design Group Ames Laboratory Logos You are here Home Visual Design Group Graphics Services supports the design, printing and production needs of the Ames Laboratory. For...

  2. Ecowatt Design LLC | Open Energy Information

    Open Energy Info (EERE)

    Ecowatt Design LLC Jump to: navigation, search Logo: Ecowatt Design LLC Name: Ecowatt Design LLC Address: 10900 Northwest Fwy Place: Houston, Texas Zip: 77092 Region: Texas Area...

  3. Bay Solar Power Design | Open Energy Information

    Open Energy Info (EERE)

    Solar Power Design Jump to: navigation, search Name: Bay Solar Power Design Place: California Product: US-based PV system installer. References: Bay Solar Power Design1 This...

  4. Commerce RISE Program Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commerce RISE Program Design Commerce RISE Program Design Community Power Works program design, a document posted on the U.S. Department of Energy's Better Buildings Neighborhood ...

  5. California Green Designs | Open Energy Information

    Open Energy Info (EERE)

    Designs Jump to: navigation, search Name: California Green Designs Place: Encino, California Zip: 91316 Sector: Buildings, Renewable Energy Product: Designs and builds...

  6. Green Integrated Design | Open Energy Information

    Open Energy Info (EERE)

    Integrated Design Jump to: navigation, search Logo: Green Integrated Design Name: Green Integrated Design Place: Tempe, Arizona Zip: 85283 Number of Employees: 1-10 Year Founded:...

  7. Identity and Design Guidelines | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Guidelines Identity and Design Guidelines Package icon Identity and Design Guidelines More Documents & Publications Collegiate Wind Competition Identity Guidelines Policy ...

  8. CASE Design/Remodeling | Open Energy Information

    Open Energy Info (EERE)

    DesignRemodeling Jump to: navigation, search Name: CASE DesignRemodeling Place: Bethesda, MD Website: www.casedesignremodeling.com References: CASE DesignRemodeling1...

  9. Waterflooding injectate design systems and methods (Patent) ...

    Office of Scientific and Technical Information (OSTI)

    Waterflooding injectate design systems and methods Citation Details In-Document Search Title: Waterflooding injectate design systems and methods A method of designing an injectate...

  10. RAPID/Overview/Geothermal/Exploration/Montana | Open Energy Informatio...

    Open Energy Info (EERE)

    Montana < RAPID | Overview | Geothermal | Exploration(Redirected from RAPIDAtlasGeothermalExplorationMontana) Redirect page Jump to: navigation, search REDIRECT...

  11. RAPID/Overview/Geothermal/Exploration/Idaho | Open Energy Information

    Open Energy Info (EERE)

    Idaho < RAPID | Overview | Geothermal | Exploration(Redirected from RAPIDAtlasGeothermalExplorationIdaho) Redirect page Jump to: navigation, search REDIRECT...

  12. RAPID/Overview/Geothermal/Exploration/Utah | Open Energy Information

    Open Energy Info (EERE)

    Utah < RAPID | Overview | Geothermal | Exploration(Redirected from RAPIDAtlasGeothermalExplorationUtah) Redirect page Jump to: navigation, search REDIRECT...

  13. RAPID/Overview/Geothermal/Exploration/Oregon | Open Energy Information

    Open Energy Info (EERE)

    Oregon < RAPID | Overview | Geothermal | Exploration(Redirected from RAPIDAtlasGeothermalExplorationOregon) Redirect page Jump to: navigation, search REDIRECT...

  14. RAPID/Overview/Geothermal/Exploration/Colorado | Open Energy...

    Open Energy Info (EERE)

    Colorado < RAPID | Overview | Geothermal | Exploration(Redirected from RAPIDAtlasGeothermalExplorationColorado) Redirect page Jump to: navigation, search REDIRECT...

  15. RAPID/Overview/Geothermal/Exploration/Texas | Open Energy Information

    Open Energy Info (EERE)

    Texas < RAPID | Overview | Geothermal | Exploration(Redirected from RAPIDAtlasGeothermalExplorationTexas) Redirect page Jump to: navigation, search REDIRECT...

  16. RAPID/Overview/Geothermal/Exploration/Hawaii | Open Energy Information

    Open Energy Info (EERE)

    Hawaii < RAPID | Overview | Geothermal | Exploration(Redirected from RAPIDAtlasGeothermalExplorationHawaii) Redirect page Jump to: navigation, search REDIRECT...

  17. Center for Inverse Design: About the Center for Inverse Design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organization Partner Institutions Principal Investigators Research Thrusts & Subtasks Approach Publications SharePoint Collaboration Tool For research results, information, and discussion board Learn more about some recent research highlights from the Center for Inverse Design Meet some of our principal investigators in the Center for Inverse Design by viewing the short videos Download latest chart of efficiencies determined by certified agencies/labs of best research solar cells worldwide

  18. HostDesigner, Version 3

    SciTech Connect (OSTI)

    2015-09-18

    HostDesigner is a computer-aided molecular design code that enables the general application of de novo structure-based methods to problems in chemistry and material science. Its purpose is to identify organic molecules with 3D structures that match user-input specifications. To accomplish this, the code connects chemical fragments to build millions of potential molecules, evaluates the resulting structures based on geometric constraints, and outputs a rank-ordered list of candidates. Example applications include the design of metal ion sequestering agents for use in separations processes, molecules that form self-assembled nanoscale containers, and molecular building blocks for metal-organic frameworks.

  19. Zero Student Design Competition Guide

    Broader source: Energy.gov (indexed) [DOE]

    Race to Zero Student Design Competition | 1 2016 U.S. Department of Energy Race to Zero Student Design Competition Guide August 2015 FOREWORD Race to Zero Student Design Competition | 2 FOREWORD This is an exciting time-a time when zero energy ready homes have become readily achievable and cost-effective. By definition, these high-performance homes are so energy efficient that renewable power can offset all or most of their annual energy consumption. The U.S. Department of Energy (DOE) Race to

  20. Chapter 4: The Building Architectural Design

    Broader source: Energy.gov [DOE]

    Chapter 4 of the LANL Sustainable Design Guide featuring schematic design, designing using computer simulations, design of high performance featurea and systems, daylighting, passive and active solar systems, and accommodating recycling activities.

  1. Catalyst by Design - Theoretical, Nanostructural, and Experimental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Oxidation Catalyst for Diesel Engine Emission Treatment Catalyst by Design - Theoretical, ... More Documents & Publications Catalyst by Design - Theoretical, Nanostructural, and ...

  2. Electronic Records Management Software Applications Design Criteria...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electronic Records Management Software Applications Design Criteria Standard Electronic Records Management Software Applications Design Criteria Standard This Standard is reissued...

  3. Conceptual Safety Design RM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Safety Design RM Conceptual Safety Design RM The Conceptual Safety Design (CSD) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the Conceptual Safety Design work, processes and documentation prior to approval of CD-1. PDF icon Conceptual Safety Design RM More Documents & Publications Preliminary Safety Design RM Safety Design Strategy RM Safety Design Strategy Standard Review Plan (SRP)

  4. Audit Implementation Design Plan | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Audit Implementation Design Plan Document Number: NA Effective Date: 082014 File (public): PDF icon Audit Implementation Design Plan April 2014...

  5. Proactive Strategies for Designing Thermoelectric Materials for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Proactive Strategies for Designing Thermoelectric Materials for Power Generation Proactive Strategies for Designing Thermoelectric Materials for Power ...

  6. Final Design RM | Department of Energy

    Energy Savers [EERE]

    Final Design RM Final Design RM The Final Design (FD) Review Module (RM) is a tool that assists Department of Energy (DOE) federal project review teams in evaluating the technical sufficiency of the final design prior to CD-3 approval. The FD RM focuses on the engineering design, technology, safety, and quality assurance to determine whether it meets overall design commitments, technical and safety requirements. PDF icon Final Design RM More Documents & Publications Seismic Design

  7. Center for Energy Efficient Design

    High Performance Buildings Database

    Rocky Mount, VA As the first Passivhaus public school in North America, the Center for Energy Efficient Design (CEED) in Rocky Mount, Virginia, is a national model for green school construction. An extension of The Leonard A.

  8. NCSX Toroidal Field Coil Design

    SciTech Connect (OSTI)

    Kalish, M.; Rushinski, J.; Myatt, L.; Brooks, A.; Dahlgren, F.; Chrzanowski, J.; Reiersen, W.; Freudenberg, K.

    2005-10-07

    The National Compact Stellarator Experiment (NCSX) is an experimental device whose design and construction is underway at the Department of Energy's Princeton Plasma Physics Laboratory (PPPL). The primary coil systems for the NCSX device consist of the twisted plasma-shaping Modular Coils, the Poloidal Field Coils, and the Toroidal Field (TF) Coils. The TF Coils are D-shaped coils wound from hollow copper conductor, and vacuum impregnated with a glass-epoxy resin system. There are 18 identical, equally spaced TF coils providing 1/R field at the plasma. They operate within a cryostat, and are cooled by LN2, nominally, to 80K. Wedge shaped castings are assembled to the inboard face of these coils, so that inward radial loads are reacted via the nesting of each of the coils against their adjacent partners. This paper outlines the TF Coil design methodology, reviews the analysis results, and summarizes how the design and analysis support the design requirements.

  9. Geothermal Design Challenge Overview Webinar

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Geothermal Technologies Office, in partnership with the Center for Advanced Energy Studies and Idaho National Lab is recruiting students in graphic design,...

  10. Production Facility SCADA Design Report

    SciTech Connect (OSTI)

    Dale, Gregory E.; Holloway, Michael Andrew; Baily, Scott A.; Woloshun, Keith Albert; Wheat, Robert Mitchell Jr.

    2015-03-23

    The following report covers FY 14 activities to develop supervisory control and data acquisition (SCADA) system for the Northstar Moly99 production facility. The goal of this effort is to provide Northstar with a baseline system design.

  11. NREL: Technology Deployment - Microgrid Design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microgrid Design Photo of a microgrid test site at the National Wind Technology Center. NREL designs independent electrical generation and distribution systems called microgrids, which deliver energy that is reliable, economical, and sustainable. NREL experts work with military, government, industry, and other organizations that cannot afford to lose power to develop reliable and cost-effective microgrid systems. Expertise and Knowledge NREL offers microgrid technical expertise and project

  12. development-plans-and-design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development Plans and Design Concepts for TRANSIMS Version 5 David Roden AECOM List of Authors ================ David Roden AECOM 3101 Wilson Boulevard, 4th Floor Arlington, VA This email address is being protected from spambots. You need JavaScript enabled to view it. Abstract ========= This presentation will provide an overview of the software changes planned for TRANSIMS Version 5.0 and solicit feedback from users on desirable improvements. The Version 5.0 design attempts to streamline the

  13. Design guidance for elastic followup

    SciTech Connect (OSTI)

    Naugle, F.V.

    1983-01-01

    The basic mechanism of elastic followup is discussed in relation to piping design. It is shown how mechanistic insight gained from solutions for a two-bar problem can be used to identify dominant design parameters and to determine appropriate modifications where elastic followup is a potential problem. It is generally recognized that quantitative criteria are needed for elastic followup in the creep range where badly unbalanced lines can pose potential problems. Approaches for criteria development are discussed.

  14. Fuel cell design and assembly

    DOE Patents [OSTI]

    Myerhoff, Alfred

    1984-01-01

    The present invention is directed to a novel bipolar cooling plate, fuel cell design and method of assembly of fuel cells. The bipolar cooling plate used in the fuel cell design and method of assembly has discrete opposite edge and means carried by the plate defining a plurality of channels extending along the surface of the plate toward the opposite edges. At least one edge of the channels terminates short of the edge of the plate defining a recess for receiving a fastener.

  15. TAPS design concepts: environmental concerns

    SciTech Connect (OSTI)

    Turner, M.J.

    1981-05-01

    The engineering concepts used in the design, construction, and operation of the Trans-Alaska Pipeline System (TAPS) were often new and in many cases in the state of the art. To accommodate environmental concerns for operating a hot oil pipeline in permafrost soil, unique features were incorporated into TAPS. Design concepts include a sophisticated leak detection and internal pipeline monitoring system. Additional features for accommodating thaw-unstable soils, earthquakes, and river systems are described. (23 references)

  16. Design of Roadside Safety Features

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analysis and Design of the Roadside Safety Features for Safety Performance Texas Transportation Institute (TTI) researchers are investigating the performance of a crash wall design to determine its effectiveness in reducing the damage to mechanically supported earth (MSE) wall panels during a vehicular impact. The simulations are based on Test Level 4 impact conditions of the new AASHTO Manual for Assessing Safety Hardware (MASH). This involves a 10,000-kg single unit truck (SUT) impacting at 90

  17. Center for Inverse Design: Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center the Inverse Design Highlights Read short descriptions of some recent successes by researchers within the Center for Inverse Design, an Energy Research Frontier Center led by the National Renewable Energy Laboratory. Illustration of Seebeck coefficient mapping instrument showing various components in an "exploded" view. Spatially Resolved Seebeck Coefficient Measurements An instrument for spatially resolved Seebeck coefficient measurements has been developed and applied to test

  18. The TPX Cryostat Conceptual Design

    SciTech Connect (OSTI)

    Ravenscroft, D.; Posey, A.; Heitzenroeder, P.; Brown, T.

    1993-10-06

    The TPX (Tokamak Physics Experiment) will be the first tokamak to employ both superconducting TF (toroidal field) and PF (poloidal field) magnets. Consequently, the entire device is located within an evacuated cryostat to provide the necessary thermal barrier between the ambient temperature test cell and the magnets that are cooled by supercritical liquid helium at 5{degrees}K. This paper describes the cryostat design requirements, design concepts, and the cryostat fabrication and installation.

  19. Design Competitions | Department of Energy

    Office of Environmental Management (EM)

    Research & Development » Technology Application R&D » Design Competitions Design Competitions National technology competitions encourage and recognize innovation in solid-state lighting products. Next Generation Luminaires Logo consisting of the words Logo consisting of the words 'Next Generation Luminaires,' with each word on its own line. 'Next' and 'Generation' are in black and 'Luminaires' is in gray uppercase letters. To the left above the word 'Next' is a curved yellow rectangle

  20. Design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear Energy Nuclear

  1. Y-12 Sustainable Design Principles for Building Design and Construction

    SciTech Connect (OSTI)

    Jackson, J. G.

    2008-11-01

    B&W Y-12 is committed to modernizing the Y-12 complex to meet future needs with a sustainable and responsive infrastructure and to integrating sustainability principles and practices into Y-12 work (Y72-001, B&W Y-12 Environmental, Safety and Health Policy). This commitment to sustainability and specifically sustainable design of buildings is also incorporated into Presidential Executive Orders (EO), DOE Orders (DOE O), and goals. Sustainable building design is an approach to design, construct, and operate facilities in an efficient and environmentally sound manner that will produce a healthful, resource-efficient and productive working environment that is inherently protective of the environment. The DOE has established the following 5 Guiding Principles for High Performance Sustainable Building (HPSB), and has issued directives that require Y-12 to incorporate the principles and a number of supporting specific practices and techniques into building design, construction and renovation projects: (1) Employ Integrated Design Principles; (2) Optimize Energy Performance; (3) Protect and Conserve Water; (4) Enhance Indoor Environmental Quality; and (5) Reduce Environmental Impact of Materials. The purpose of this document is to present the required sustainable building principles, practices and techniques, summarize the key drivers for incorporating them into Y-12 projects, and present additional recommendations and resources that can be used to support sustainable buildings to enhance the environmental and economic performance of the Y-12 Complex.

  2. Passive solar design handbook. Volume III. Passive solar design analysis

    SciTech Connect (OSTI)

    Jones, R.W.; Balcomb, J.D.; Kosiewicz, C.E.; Lazarus, G.S.; McFarland, R.D.; Wray, W.O.

    1982-07-01

    Simple analytical methods concerning the design of passive solar heating systems are presented with an emphasis on the average annual heating energy consumption. Key terminology and methods are reviewed. The solar load ratio (SLR) is defined, and its relationship to analysis methods is reviewed. The annual calculation, or Load Collector Ratio (LCR) method, is outlined. Sensitivity data are discussed. Information is presented on balancing conservation and passive solar strategies in building design. Detailed analysis data are presented for direct gain and sunspace systems, and details of the systems are described. Key design parameters are discussed in terms of their impact on annual heating performance of the building. These are the sensitivity data. The SLR correlations for the respective system types are described. The monthly calculation, or SLR method, based on the SLR correlations, is reviewed. Performance data are given for 9 direct gain systems and 15 water wall and 42 Trombe wall systems. (LEW)

  3. System 80+{trademark} Standard Design: CESSAR design certification. Volume 13

    SciTech Connect (OSTI)

    1997-12-31

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. This document describes the Combustion Engineering, Inc. System 80+{trademark} Standard Design. This volume contains sections 2 thru 7 of Chapter 15 -- Accident Analyses. Topics covered are: decrease in heat removal by the secondary system; decrease in reactor coolant flow rate; reactivity and power distribution anomalies; increase in RCS inventory; decrease in RCS inventory; and radioactive material release from a system or component. Appendices 15A, 15B, and 15C are included.

  4. Career Map: Design Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Engineer Career Map: Design Engineer A product designer watches as several engineers work on a wind turbine component. Design Engineer Position Title Design Engineer Alternate Title(s) Materials Engineer, Composite Engineer, Product Designer, Structural Engineer Education & Training Level Bachelor's degree required, graduate degree preferred Education & Training Level Description Design engineers typically hold a bachelor's degree or higher in electrical or mechanical engineering

  5. Chapter 2: Whole-Buildling Design

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Whole-Building Design Whole-Building Design - the What and How Articulating and Communicating a Vision Creating an Integrated Project Team Developing Project Goals Design and Execution Phases Decision-Making Process Writing Sustainable F&OR Documents Specific Sustainable Elements of F&OR Documents Fitting into the LANL Design Process LANL | Chapter 2 Whole-Building Design - the What and How Sustainable design can most easily be achieved through Whole-Building Design a whole-building

  6. Chapter 4: The Building Architectural Design

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : The Building Architectural Design Schematic Design Designing Using Computer Simulations Design of High Performance Features and Systems Designing for Daylighting Passive and Active Solar Systems Accommodating Recycling Activities LANL | Chapter 4 The Building Architectural Design Schematic Design Achieving a sustainable building requires a commitment from developing the initial F&OR documents through construction detailing and commissioning. Initial deci- sions, such as the building's

  7. Safety Design Strategy RM | Department of Energy

    Energy Savers [EERE]

    Safety Design Strategy RM Safety Design Strategy RM The SDS Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the conceptual safety design strategy documentation package (Conceptual Safety Design Report) prior to CD-1 approval and the adequacy of the preliminary safety design strategy documentation packaged (Preliminary Safety Design Report) prior to CD- 2 approval. PDF icon Safety Design Strategy RM More Documents & Publications Safety

  8. Preliminary Safety Design RM | Department of Energy

    Energy Savers [EERE]

    Safety Design RM Preliminary Safety Design RM The Preliminary Safety Design (PSD) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the Preliminary Safety Design work, processes and documentation prior to approval of CD-2. PDF icon Preliminary Safety Design RM More Documents & Publications Conceptual Safety Design RM Preliminary Safety Design RM CD-1, Approve Alternative Selection and Cost Range Requirements Crosswalk of

  9. HostDesigner, Version 3

    Energy Science and Technology Software Center (OSTI)

    2015-09-18

    HostDesigner is a computer-aided molecular design code that enables the general application of de novo structure-based methods to problems in chemistry and material science. Its purpose is to identify organic molecules with 3D structures that match user-input specifications. To accomplish this, the code connects chemical fragments to build millions of potential molecules, evaluates the resulting structures based on geometric constraints, and outputs a rank-ordered list of candidates. Example applications include the design of metal ionmore » sequestering agents for use in separations processes, molecules that form self-assembled nanoscale containers, and molecular building blocks for metal-organic frameworks.« less

  10. Passive Energy Building Design Tool

    Energy Science and Technology Software Center (OSTI)

    1994-11-01

    SOLAR5 is a computer aided design tool to help architects design better, more energy efficient buildings. It is intended for use at the beginning of the design process. To get started, only four pieces of information are necessary to compute the energy needed: the square footage, the number of stories, the kind of building (such as school, home, hotel, or any one of 20 types), and its location (the program stores the temperature ranges formore » fourty major cities). Additional information may be given later to fine tune the design. An expert system using heuristics from a wide range of sources, automatically creates a passive solar baseline building from the four facts specified for that project. By modifying and adapting prior designs the user can create and work upon as many as nine schemes simultaneously. SOLAR5 can analyze the buildings thermal performance for each hour of each month and plot its total heat gain or loss as a three-dimensional surface. After reading the plot, the user can immediately redesign the building and rerun the analysis. Separate heat gain/loss surfaces can be plotted for each of the different parts of the building or schemes that add together to make up the total, including walls, roof, windows, skylights, floor, slab on grade, people, lights, equipment, and infiltration. Two different schemes can be instantly compared by asking for a three-dimensional plot showing only the difference in their performances. The objective of SOLAR5 is to allow the designer to make changes easily and quickly with detailed instantaneous pictorial feedback of the implications of the change.« less

  11. Waste Package Design Methodology Report

    SciTech Connect (OSTI)

    D.A. Brownson

    2001-09-28

    The objective of this report is to describe the analytical methods and processes used by the Waste Package Design Section to establish the integrity of the various waste package designs, the emplacement pallet, and the drip shield. The scope of this report shall be the methodology used in criticality, risk-informed, shielding, source term, structural, and thermal analyses. The basic features and appropriateness of the methods are illustrated, and the processes are defined whereby input values and assumptions flow through the application of those methods to obtain designs that ensure defense-in-depth as well as satisfy requirements on system performance. Such requirements include those imposed by federal regulation, from both the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), and those imposed by the Yucca Mountain Project to meet repository performance goals. The report is to be used, in part, to describe the waste package design methods and techniques to be used for producing input to the License Application Report.

  12. Protein design for pathway engineering

    SciTech Connect (OSTI)

    Eriksen, DT; Lian, JZ; Zhao, HM

    2014-02-01

    Design and construction of biochemical pathways has increased the complexity of biosynthetically-produced compounds when compared to single enzyme biocatalysis. However, the coordination of multiple enzymes can introduce a complicated set of obstacles to overcome in order to achieve a high titer and yield of the desired compound. Metabolic engineering has made great strides in developing tools to optimize the flux through a target pathway, but the inherent characteristics of a particular enzyme within the pathway can still limit the productivity. Thus, judicious protein design is critical for metabolic and pathway engineering. This review will describe various strategies and examples of applying protein design to pathway engineering to optimize the flux through the pathway. The proteins can be engineered for altered substrate specificity/selectivity, increased catalytic activity, reduced mass transfer limitations through specific protein localization, and reduced substrate/product inhibition. Protein engineering can also be expanded to design biosensors to enable high through-put screening and to customize cell signaling networks. These strategies have successfully engineered pathways for significantly increased productivity of the desired product or in the production of novel compounds. (C) 2013 Elsevier Inc. All rights reserved.

  13. ADVANCES IN YUCCA MOUNTAIN DESIGN

    SciTech Connect (OSTI)

    Harrington, P.G.; Gardiner, J.T.; Russell, P.R.Z.; Lachman, K.D.; McDaniel, P.W.; Boutin, R.J.; Brown, N.R.; Trautner, L.J.

    2003-02-27

    Since site designation of the Yucca Mountain Project by the President, the U.S. Department of Energy (DOE) has begun the transition from the site characterization phase of the project to preparation of the license application. As part of this transition, an increased focus has been applied to the repository design. Several evolution studies were performed to evaluate the repository design and to determine if improvements in the design were possible considering advances in the technology for handling and packaging nuclear materials. The studies' main focus was to reduce and/or eliminate uncertainties in both the pre-closure and post-closure performance of the repository and to optimize operations. The scope and recommendations from these studies are the subjects of this paper and include the following topics: (1) a more phased approach for the surface facility that utilize handling and packaging of the commercial spent nuclear fuel in a dry environment rather than in pools as was presented in the site recommendation; (2) slight adjustment of the repository footprint and a phased approach for construction and emplacement of the repository subsurface; and (3) simplification of the construction, fabrication and installation of the waste package and drip shield.

  14. ALS beamline design requirements: A guide for beamline designers

    SciTech Connect (OSTI)

    1996-06-01

    This manual is written as a guide for researchers in designing beamlines and endstations acceptable for use at the ALS. It contains guidelines and policies related to personnel safety and equipment and vacuum protection. All equipment and procedures must ultimately satisfy the safety requirements set aside in the Lawrence Berkeley National Laboratory (LBNL) Health and Safety Manual (PUB-3000) which is available from the ALS User Office or on the World WideWeb from the LBNL Homepage (http:// www.lbl.gov).

  15. D light design | Open Energy Information

    Open Energy Info (EERE)

    light design Jump to: navigation, search Name: d.light design Place: New Delhi, Delhi (NCT), India Zip: 1110049 Product: d.light is a US-founded, India-based designer and...

  16. Development of Computational Tools for Metabolic Model Curation, Flux Elucidation and Strain Design

    SciTech Connect (OSTI)

    Maranas, Costas D

    2012-05-21

    An overarching goal of the Department of Energy™ mission is the efficient deployment and engineering of microbial and plant systems to enable biomass conversion in pursuit of high energy density liquid biofuels. This has spurred the pace at which new organisms are sequenced and annotated. This torrent of genomic information has opened the door to understanding metabolism in not just skeletal pathways and a handful of microorganisms but for truly genome-scale reconstructions derived for hundreds of microbes and plants. Understanding and redirecting metabolism is crucial because metabolic fluxes are unique descriptors of cellular physiology that directly assess the current cellular state and quantify the effect of genetic engineering interventions. At the same time, however, trying to keep pace with the rate of genomic data generation has ushered in a number of modeling and computational challenges related to (i) the automated assembly, testing and correction of genome-scale metabolic models, (ii) metabolic flux elucidation using labeled isotopes, and (iii) comprehensive identification of engineering interventions leading to the desired metabolism redirection.

  17. Conceptual Design RM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design RM Conceptual Design RM This Review Module is a tool that assists Department of Energy (DOE) federal project review teams in evaluating the adequacy of the conceptual design package prior to CD-1 approval. It focuses on the conceptual design package key elements including requirements analysis, safety design basis, alternatives analysis, systems engineering, value management, risk analysis, and acquisition strategy. PDF icon Conceptual Design RM More Documents & Publications

  18. Passive Solar Home Design | Department of Energy

    Energy Savers [EERE]

    Design » Design for Efficiency » Passive Solar Home Design Passive Solar Home Design This North Carolina home gets most of its space heating from the passive solar design, but the solar thermal system (top of roof) supplies both domestic hot water and a secondary radiant floor heating system. | Photo courtesy of Jim Schmid Photography. This North Carolina home gets most of its space heating from the passive solar design, but the solar thermal system (top of roof) supplies both domestic hot

  19. Passive Solar Home Design | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design » Design for Efficiency » Passive Solar Home Design Passive Solar Home Design This North Carolina home gets most of its space heating from the passive solar design, but the solar thermal system (top of roof) supplies both domestic hot water and a secondary radiant floor heating system. | Photo courtesy of Jim Schmid Photography. This North Carolina home gets most of its space heating from the passive solar design, but the solar thermal system (top of roof) supplies both domestic hot

  20. Extreme Scale Computing, Co-design

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... software, and hardware in an integrated computational co-design process. * Designed Cruft, a suite of molecular dynamics proxy applications (software) developed to explore ...

  1. Advanced Materials Development through Computational Design ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development through Computational Design Advanced Materials Development through Computational Design Presentation given at the 2007 Diesel Engine-Efficiency & Emissions Research ...

  2. Next Generation Luminaires Design Competition Announces 2013...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners Next Generation Luminaires Design Competition Announces 2013 Outdoor Winners February 27, 2014 -...

  3. Elementary tetrahelical protein design for diverse oxidoreductase...

    Office of Scientific and Technical Information (OSTI)

    Elementary tetrahelical protein design for diverse oxidoreductase functions Citation Details In-Document Search Title: Elementary tetrahelical protein design for diverse...

  4. Cambridge Design & Development | Open Energy Information

    Open Energy Info (EERE)

    Design & Development Jump to: navigation, search Name: Cambridge Design & Development Place: Cambridge, MA Information About Partnership with NREL Partnership with NREL Yes...

  5. Savings by Design (Offered by five Utilities)

    Broader source: Energy.gov [DOE]

    In conjunction with the California Department of Public Utilities, Savings by Design offers services and incentives to help owners and designers of commercial buildings raise energy performance....

  6. Thermoelectric Materials by Design, Computational Theory and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    by Design, Computational Theory and Structure Thermoelectric Materials by Design, Computational Theory and Structure 2009 DOE Hydrogen Program and Vehicle Technologies Program...

  7. Malczewski Product Design LLC | Open Energy Information

    Open Energy Info (EERE)

    Malczewski Product Design LLC Jump to: navigation, search Name: Malczewski Product Design LLC Place: Neenah, Wisconsin Zip: 54956 Sector: Wind energy Product: Product development...

  8. Chemical Design Inc CDI | Open Energy Information

    Open Energy Info (EERE)

    Design Inc CDI Jump to: navigation, search Name: Chemical Design Inc (CDI) Place: Lockport, New York Zip: 14094 Product: US-based engineer of separation and purification plants;...

  9. Separation Design Group LLC | Open Energy Information

    Open Energy Info (EERE)

    search Name: Separation Design Group LLC Place: Waynesburg, Pennsylvania Zip: 15370 Product: Separation Design Group is a research and product development firm established in...

  10. Electrochemical Design Associates EDA | Open Energy Information

    Open Energy Info (EERE)

    Design Associates EDA Jump to: navigation, search Name: Electrochemical Design Associates (EDA) Place: California Zip: 94608-2513 Product: EDA is a technology development company...

  11. Reactor Engineering Design | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design The Reactor Engineering Design Key Technology will focus on control of chemical reactions with unprecedented precision in increasingly modular and efficient...

  12. Next Generation Luminaires Design Competition Announces 2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Next Generation Luminaires Design Competition Announces 2015 Winners Next Generation Luminaires Design Competition Announces 2015 Winners May 5, 2015 - 2:17pm Addthis Winners in ...

  13. Design Optimization of Piezoceramic Multilayer Actuators for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications Design Optimization of Piezoceramic Multilayer Actuators for Heavy Duty Diesel Engine Fuel Injectors Vehicle Technologies Office Merit Review 2014: Design Optimization ...

  14. Design Principles for Materials with Magnetic Functionality ...

    Office of Scientific and Technical Information (OSTI)

    Design Principles for Materials with Magnetic Functionality Citation Details In-Document Search Title: Design Principles for Materials with Magnetic Functionality This report ...

  15. Design Optimization of Piezoceramic Multilayer Actuators for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Design Optimization of Piezoceramic Multilayer Actuators for Heavy Duty Diesel Engine Fuel Injectors Design Optimization of Piezoceramic Multilayer ...

  16. Design Principles for Materials with Magnetic Functionality ...

    Office of Scientific and Technical Information (OSTI)

    Design Principles for Materials with Magnetic Functionality Citation Details In-Document Search Title: Design Principles for Materials with Magnetic Functionality You are ...

  17. Developing Integrated National Design Standards for Offshore...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Developing Integrated National Design Standards for Offshore Wind Plants Developing Integrated National Design Standards for Offshore Wind Plants January 6, 2014 - 10:00am Addthis ...

  18. Solar Site Design | Open Energy Information

    Open Energy Info (EERE)

    Site Design Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Solar Site Design AgencyCompany Organization: Loyal Enterprises LLC Sector: Energy Focus Area: Solar...

  19. A Designed Protein Maps Brain Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Designed Protein Maps Brain Activity Print A team of scientists from the Howard Hughes Medical Institute's Janelia Research Campus designed and validated via x-ray...

  20. University of Alaska Fairbanks: Technical Design Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    University of Alaska Fairbanks Collegiate 2014 Technical Report 2 Table of Contents Turbine Overview ................................................................................................................................................. 3 Blade Design Techniques and Methods ......................................................................................................... 3 Hub Design Techniques and Methods

  1. proposed surface and subsurface marker designs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Images of proposed markers for the surface and subsurface Large Surface Marker - Proposed Design with Plaques of Text and Images Small Subsurface Marker - Proposed Design

  2. 2013 and 2014 Hydrogen Student Design Contests

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Contest challenges university students to design hydrogen energy applications ... operational safety, as well as public perception of safety, are included Siting ...

  3. International Linear Collider Technical Design Report - Volume...

    Office of Scientific and Technical Information (OSTI)

    Design Report - Volume 2: Physics Citation Details In-Document Search Title: International Linear Collider Technical Design Report - Volume 2: Physics You are accessing a ...

  4. Functional Design Engineering Inc | Open Energy Information

    Open Energy Info (EERE)

    Functional Design Engineering Inc Jump to: navigation, search Name: Functional Design Engineering Inc Region: United States Sector: Marine and Hydrokinetic Website:...

  5. Lighting Control Design | Open Energy Information

    Open Energy Info (EERE)

    Control Design Jump to: navigation, search Name: Lighting Control & Design Place: Glendale, California Zip: CA 91201 Product: California-based manufacturer of digital lighting...

  6. Advanced Materials by Design: Programable Transient Electronics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Materials by Design: Programable Transient Electronics Transient materials is an emerging area of materials design with the key attribute being the ability to physically...

  7. China Building Design Consultants | Open Energy Information

    Open Energy Info (EERE)

    Building Design Consultants Jump to: navigation, search Name: China Building Design Consultants Place: Beijing Municipality, China Sector: Solar Product: Beijing-based architecture...

  8. Preliminary Design RM | Department of Energy

    Energy Savers [EERE]

    Design RM Preliminary Design RM The PD Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the technical sufficiency of the PD prior to CD-2 approval. This PD RM can be applied anytime during the design prior to CD-2 approval. However, in practice, the design is typically review at the 30% design stage, which is corresponding to the end of the PD before initiation of final design. PDF icon Prelminary Design RM More Documents & Publications Final Design RM

  9. Low-Energy Parking Structure Design (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-01-01

    This guide provides design teams with best practices for parking structure energy efficiency in the form of goals for each design aspect that affects energy use.

  10. Tools for Designing & Implementing Better Finance Programs |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tools for Designing & Implementing Better Finance Programs Tools for Designing & Implementing Better Finance Programs Clean energy finance programs PDF icon Presentation Microsoft ...

  11. Home Design & Remodeling | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home Design & Remodeling Home Design & Remodeling Ultra-Efficient Home Design Ultra-Efficient Home Design An ultra-efficient home can be designed and built to produce as much energy as it uses -- or even more! Read more Passive Solar Home Design Passive Solar Home Design Passive solar design takes advantage of a building's site, climate, and materials to minimize energy use. Read more Whole-House Systems Approach Whole-House Systems Approach A whole-house systems approach considers the

  12. Single wire drift chamber design

    SciTech Connect (OSTI)

    Krider, J.

    1987-03-30

    This report summarizes the design and prototype tests of single wire drift chambers to be used in Fermilab test beam lines. The goal is to build simple, reliable detectors which require a minimum of electronics. Spatial resolution should match the 300 ..mu..m rms resolution of the 1 mm proportional chambers that they will replace. The detectors will be used in beams with particle rates up to 20 KHz. Single track efficiency should be at least 99%. The first application will be in the MT beamline, which has been designed for calibration of CDF detectors. A set of four x-y modules will be used to track and measure the momentum of beam particles.

  13. Designs of SSRF Insertion Devices

    SciTech Connect (OSTI)

    Zhou, Q. G.; Chen, N.; Zhang, M.; Li, Y.; Su, W. L.

    2007-01-19

    Five IDs will be built for the Shanghai Synchrotron Radiation Facility (SSRF). Two identical mini-gap undulators with the period length 25mm and the minimum gap 6mm will use the in-vacuum technology and can operate in tapered mode. Two wigglers with the period lengths 7.9cm and 14cm and the same minimum gap 14mm will produce the peak fields of 1.2T and 1.94T. A variable polarization undulator of the APPLE-II type with 4.2m long and the period length 10cm can provide linearly, circularly and elliptically polarized radiation in a wide spectral range. This paper describes the magnet designs and the mechanical structure designs of these IDs.

  14. design and mod/sim

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    design and mod/sim - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  15. Security-by-design handbook.

    SciTech Connect (OSTI)

    Snell, Mark Kamerer; Jaeger, Calvin Dell; Scharmer, Carol; Jordan, Sabina Erteza; Tanuma, Koji; Ochiai, Kazuya; Iida, Toru

    2013-01-01

    This document is a draft SecuritybyDesign (SeBD) handbook produced to support the Work Plan of the Nuclear Security Summit to share best practices for nuclear security in new facility design. The Work Plan calls on States to %E2%80%9Cencourage nuclear operators and architect/engineering firms to take into account and incorporate, where appropriate, effective measures of physical protection and security culture into the planning, construction, and operation of civilian nuclear facilities and provide technical assistance, upon request, to other States in doing so.%E2%80%9D The materials for this document were generated primarily as part of a bilateral project to produce a SeBD handbook as a collaboration between the Japan Atomic Energy Agency (JAEA) Nuclear Nonproliferation Science and Technology Center and Sandia National Laboratories (SNL), which represented the US Department Energy (DOE) National Nuclear Security Administration (NNSA) under a Project Action Sheet PASPP04. Input was also derived based on tours of the Savannah River Site (SRS) and Japan Nuclear Fuel Limited (JNFL) Rokkasho Mixed Oxide Fuel fabrication facilities and associated project lessonslearned. For the purposes of the handbook, SeBD will be described as the systemlevel incorporation of the physical protection system (PPS) into a new nuclear power plant or nuclear facility resulting in a PPS design that minimizes the risk of malicious acts leading to nuclear material theft; nuclear material sabotage; and facility sabotage as much as possible through features inherent in (or intrinsic to) the design of the facility. A fourelement strategy is presented to achieve a robust, durable, and responsive security system.

  16. Residential Retrofit Program Design Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance Program Residential Retrofit Program Design Guide May 2011 This work has been performed by the Vermont Energy Investment Corporation (VEIC) and Energy Futures Group (EFG), under the Contract No. 4200000341 with Oak Ridge National Laboratory which is managed by UT-Battelle, LLC under Contract with the US Department of Energy No. DE-AC05-00OR22725. This document was prepared in collaboration with a partnership of companies under this contract. The partnership is led by the

  17. Nuclear Reactor Safety Design Criteria

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-01-19

    The order establishes nuclear safety criteria applicable to the design, fabrication, construction, testing, and performance requirements of nuclear reactor facilities and safety class structures, systems, and components (SSCs) within these facilities. Cancels paragraphs 8a and 8b of DOE 5480.6. Cancels DOE O 5480.6 in part. Supersedes DOE 5480.1, dated 1-19-93. Certified 11-18-10.

  18. 2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling Station 2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling Station December 16, 2013 - ...

  19. Design Evolution Study - Aging Options

    SciTech Connect (OSTI)

    P. McDaniel

    2002-04-05

    The purpose of this study is to identify options and issues for aging commercial spent nuclear fuel received for disposal at the Yucca Mountain Mined Geologic Repository. Some early shipments of commercial spent nuclear fuel to the repository may be received with high-heat-output (younger) fuel assemblies that will need to be managed to meet thermal goals for emplacement. The capability to age as much as 40,000 metric tons of heavy metal of commercial spent nuclear he1 would provide more flexibility in the design to manage this younger fuel and to decouple waste receipt and waste emplacement. The following potential aging location options are evaluated: (1) Surface aging at four locations near the North Portal; (2) Subsurface aging in the permanent emplacement drifts; and (3) Subsurface aging in a new subsurface area. The following aging container options are evaluated: (1) Complete Waste Package; (2) Stainless Steel inner liner of the waste package; (3) Dual Purpose Canisters; (4) Multi-Purpose Canisters; and (5) New disposable canister for uncanistered commercial spent nuclear fuel. Each option is compared to a ''Base Case,'' which is the expected normal waste packaging process without aging. A Value Engineering approach is used to score each option against nine technical criteria and rank the options. Open issues with each of the options and suggested future actions are also presented. Costs for aging containers and aging locations are evaluated separately. Capital costs are developed for direct costs and distributable field costs. To the extent practical, unit costs are presented. Indirect costs, operating costs, and total system life cycle costs will be evaluated outside of this study. Three recommendations for aging commercial spent nuclear fuel--subsurface, surface, and combined surface and subsurface are presented for further review in the overall design re-evaluation effort. Options that were evaluated but not recommended are: subsurface aging in a new subsurface area (high cost); surface aging in the complete waste package (risk to the waste package and impact on the Waste Handling Facility); and aging in the stainless steel liner (impact on the waste package design and new high risk operations added to the waste packaging process). The selection of a design basis for aging will be made in conjunction with the other design re-evaluation studies.

  20. Structural Design Challenges in Design Certification Applications for New Reactors

    SciTech Connect (OSTI)

    Miranda, M.; Braverman, J.; Wei, X.; Hofmayer, C.; Xu, J.

    2011-07-17

    The licensing framework established by the U.S. Nuclear Regulatory Commission under Title 10 of the Code of Federal Regulations (10 CFR) Part 52, “Licenses, Certifications, and Approvals for Nuclear Power Plants,” provides requirements for standard design certifications (DCs) and combined license (COL) applications. The intent of this process is the early reso- lution of safety issues at the DC application stage. Subsequent COL applications may incorporate a DC by reference. Thus, the COL review will not reconsider safety issues resolved during the DC process. However, a COL application that incorporates a DC by reference must demonstrate that relevant site-specific de- sign parameters are confined within the bounds postulated by the DC, and any departures from the DC need to be justified. This paper provides an overview of structural design chal- lenges encountered in recent DC applications under the 10 CFR Part 52 process, in which the authors have participated as part of the safety review effort.