Powered by Deep Web Technologies
Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

E-Print Network 3.0 - analog ic designed Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: problems facing IC designers. High-power ICs rapidly deplete battery energy. Rapid changes in power... in IC design. Modeling and optimizing IC thermal...

2

PHYSICAL DESIGN TRADEOFFS IN POWER DISTRIBUTION NETWORKS FOR 3-D ICs  

E-Print Network [OSTI]

PHYSICAL DESIGN TRADEOFFS IN POWER DISTRIBUTION NETWORKS FOR 3-D ICs Ioannis Tsioutsios, Vasilis F the tradeoffs among the different interconnects resources in the design process of 3- D power distribution.tsioutsios, vasileios.pavlidis, giovanni.demicheli}@epfl.ch Abstract--A physical model for the design of the power

De Micheli, Giovanni

3

The Need for a Full-Chip and Package Thermal Model for Thermally Optimized IC Designs  

E-Print Network [OSTI]

ceramic ball-grid array (CBGA) pack- age consisting of the chip (die), thermal interface material, heatThe Need for a Full-Chip and Package Thermal Model for Thermally Optimized IC Designs Wei Huang detailed die temperature with a full-chip thermal model at early design stages is important to discover

Skadron, Kevin

4

International Solar Centre, Berlin - A Comprehensive Energy Design  

E-Print Network [OSTI]

ESL-IC-10/05-06 1 INTERNATIONAL SOLAR CENTRE BERLIN - A COMPREHENSIVE ENERGY DESIGN Robert Himmler M. Norbert Fisch Technical University Braunschweig Institute of Building and Solar Technology (IGS) Mühlenpfordtstr. 23 38106 Braunschweig... / Germany ABSTRACT The International Solar Centre is a unique development in Berlin, combining a historic building and contemporary architecture to create 20 700 m² of customised office workspace. The building promotes a sustainable energy economy...

Fisch, M. N.; Himmler, R.

2005-01-01T23:59:59.000Z

5

DESIGN SUPPORT TOOLS 599 INTERNATIONAL DESIGN CONFERENCE -DESIGN 2012  

E-Print Network [OSTI]

DESIGN SUPPORT TOOLS 599 INTERNATIONAL DESIGN CONFERENCE - DESIGN 2012 Dubrovnik - Croatia, May 21 - 24, 2012. CAN COMPUTER GRAPHIC SYSTEM BE USED TO INFORM DESIGNERS ABOUT INCLUSIVITY? E. Zitkus, P. Langdon and P. J. Clarkson Keywords: inclusive design, accessibility, CAD, design process 1. Introduction

Crilly, Nathan

6

International Center 3201 South State Street, MTCC -Room 203 (312)-567-3680 icenter@iit.edu www.ic.iit.edu Illinois Institute of Technology  

E-Print Network [OSTI]

@iit.edu ­ www.ic.iit.edu Illinois Institute of Technology International Center 3201 S. State St. MTCC, Room 203 at the International Center to discuss your intent to transfer and to which school. Agree on a SEVIS release date your travel plans with the International Center. · If you decide not to transfer, you must inform

Heller, Barbara

7

Synergico: a method for systematic integration of energy efficiency into the design process of electr(on)ic equipment  

E-Print Network [OSTI]

of electr(on)ic equipment This paper presents an overall design method to better consider the energy: ecodesign method; energy efficiency, electrical and electronic products 1. Introduction Energy consumption-related products (ErP), directing manufacturers of electrical and electronic equipment and other energy

Boyer, Edmond

8

Impact of Nano-scale Through-Silicon Vias on the Quality of Today and Future 3D IC Designs  

E-Print Network [OSTI]

Impact of Nano-scale Through-Silicon Vias on the Quality of Today and Future 3D IC Designs Dae Hyun sub-micron dimensions in a few years. This downscaling of TSVs requires research on the impact of nano. In this paper, we investigate, for the first time, the impact of nano-scale TSVs on the area, wirelength, delay

Lim, Sung Kyu

9

Engineering design automation tool for yield learning model for IC packaging  

E-Print Network [OSTI]

The leading edge of semiconductor manufacturing is the high yield production of semiconductor devices of which integrated circuit packaging has a continuous increasing demand along with integrated circiut functionality. IC packaging manufacturing...

Sarwar, Abul Kalam

2012-06-07T23:59:59.000Z

10

International Center 3201 South State Street, MTCC -Room 203 (312)-567-3680 icenter@iit.edu www.ic.iit.edu Illinois Institute of Technology  

E-Print Network [OSTI]

@iit.edu ­ www.ic.iit.edu Illinois Institute of Technology International Center 3201 S. State Street MTCC, Room with the transfer of the above named scholar from the Illinois Institute of Technology. Name of Supervisor SignatureInternational Center ­ 3201 South State Street, MTCC - Room 203 ­ (312)-567-3680 ­ icenter

Heller, Barbara

11

Digital Integrated Circuit (IC) Layout andDigital Integrated Circuit (IC) Layout and DesignDesign --Week 10, Lecture 20Week 10, Lecture 20  

E-Print Network [OSTI]

Power Consumption Robustness Complexity Some new circuit solutions and design methodologies are coming. · Data latched in inverter pair. · Word line high: Writing / Reading · Writing: Write by force. · Reading of new tools. Non-recurring costs dominate the price effectiveness of low-volume ASICs. Need to have

12

International Center 3201 South State Street, MTCC -Room 203 (312)-567-3680 icenter@iit.edu www.ic.iit.edu Illinois Institute of Technology  

E-Print Network [OSTI]

International Center ­ 3201 South State Street, MTCC - Room 203 ­ (312)-567-3680 ­ icenter@iit.edu ­ www.ic.iit.edu Illinois Institute of Technology Chicago-Kent College of Law 565 West Adams Street CPT. · Transfer students may count any time spent as a full-time student at the previous school

Heller, Barbara

13

International Center 3201 South State Street, MTCC -Room 203 (312)-567-3680 icenter@iit.edu www.ic.iit.edu Illinois Institute of Technology  

E-Print Network [OSTI]

@iit.edu ­ www.ic.iit.edu Illinois Institute of Technology International Center 3201 S. State Street MTCC, Room Institute of Technology (IIT) in order to facilitate my transfer. Signature: _Date:_ SECTION B: THIS SECTION notified us of his/her intent to transfer to Illinois Institute of Technology. Please complete

Heller, Barbara

14

2004 IEEE International Solid-State Circuits Conference 0-7803-8267-6/04 2004 IEEE ISSCC 2004 / SESSION 15 / WIRELESS CONSUMER ICs / 15.7  

E-Print Network [OSTI]

· 2004 IEEE International Solid-State Circuits Conference 0-7803-8267-6/04 ©2004 IEEE ISSCC 2004 the standby time a cellular phone can sustain with each full charge of the battery, pulse frequency modulation mode, compared to 15µA in state-of-the-art ICs [4]. As a result, the cellular phone standby time may

Sanders, Seth

15

EDISON INTERNATIONAL DESIGN & ENGINEERING SERVICES  

E-Print Network [OSTI]

EDISON INTERNATIONAL® SM 1 DESIGN & ENGINEERING SERVICES SCE's Emerging Technologies Program - HVAC Southern California Edison (SCE) #12;EDISON INTERNATIONAL® SM 2 DESIGN & ENGINEERING SERVICES #12;EDISON INTERNATIONAL® SM 3 DESIGN & ENGINEERING SERVICES ET 2013-2014 Program Design ­ Three-Pronged Approach

California at Davis, University of

16

FPGA Design Practices for I&C in Nuclear Power Plants  

SciTech Connect (OSTI)

Safe FPGA design practices can be classified into three major groups covering board-level and FPGA logic-level design practices, FPGA design entry methods, and FPGA design methodology. This paper is presenting the most common hardware and software design practices that are acceptable in safety-critical FPGA systems. It also proposes an FPGA-specific design life cycle including design entry, FPGA synthesis, place and route, and validation and verification.

Bobrek, Miljko [ORNL; Wood, Richard Thomas [ORNL; Bouldin, Donald [University of Tennessee, Knoxville (UTK); Waterman, Michael E [ORNL

2009-01-01T23:59:59.000Z

17

Design analysis and comparison between standard and rotary porting systems for IC engine  

Science Journals Connector (OSTI)

Many porting systems for internal combustion engines have been tried and tested over the years, however the basic spring actuated poppet valve system has prevailed over ... last century. In the goal to lower engine

R. Palmisano; H. D. Ng

2012-02-01T23:59:59.000Z

18

International Energy Agency design tool evaluation procedure  

SciTech Connect (OSTI)

Detailed state-of-the-art building energy simulation models from nations participating in International Energy Agency (IEA) Task VIII are used to develop a quantitative procedure to evaluate more simplified design tools. Simulations are performed with the detailed models on a series of cases that progress systematically from the extremely simple to the relatively realistic. Output values for the cases, such as annual loads, annual maximum and minimum temperatures, and peak loads, are used to set target ranges with which the results from more simplified design tools can be compared. The more realistic cases, although geometrically simple, test the ability of the design tools to model such combined effects as thermal mass, direct gain windows, overhangs, internally generated heat, and dead-band and set-back thermostat control strategies. 5 refs., 9 figs., 4 tabs.

Judkoff, R.; Barakat, S.; Bloomfield, D.; Poel, B.; Stricker, R.; van Haaster, P.; Wortman, D.

1988-07-01T23:59:59.000Z

19

International Effort to Design Nuclear Fusion Reactor Launched  

Science Journals Connector (OSTI)

International Effort to Design Nuclear Fusion Reactor Launched ... Their mission is to draw up a design concept for a thermonuclear fusion reactor by December 1990. ... The work at Garching is a direct outgrowth of the recently signed International Thermonuclear Experimental Reactor (ITER) pact involving the European Community, Japan, the Soviet Union, and the U.S. (C&EN, April 25, page 19). ...

DERMOT A. O'SULLLVAN

1988-05-23T23:59:59.000Z

20

INTERNATIONAL DESIGN CONFERENCE DESIGN 2014 Dubrovnik Croatia, May 19 22, 2014.  

E-Print Network [OSTI]

1 INTERNATIONAL DESIGN CONFERENCE DESIGN 2014 Dubrovnik Croatia, May 19 22, 2014. CONCEPTIVE ARTIFICIAL INTELLIGENCE: INSIGHTS FROM DESIGN THEORY A. O. Kazakçi Keywords: artificial intelligence, design, design creativity, artificial creativity 1 Introduction ­ how can design research contribute to AI

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Validation fo the International Code Compliant Calculator (IC3) v3. 10.3 Using the RESNET Verification Procedures (No. 07-003)  

E-Print Network [OSTI]

.E., FASHRAE December 2011 ENERGY SYSTEMS LABORATORY Texas Engineering Experiment Station Texas A&M University System IC3 RESNET Validation Report, p.i December 2011 Energy Systems Laboratory, Texas A&M... state or reflect those of the Texas Engineering Experiment Station or the Energy Systems Laboratory. IC3 RESNET Validation Report, p.ii December 2011 Energy Systems Laboratory, Texas A&M University EXECUTIVE SUMMARY This report presents results...

Kim, H.; Baltazar, J.C.; Haberl, J.

22

President Bush Issues Executive Order Designating ITER International Fusion  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

President President Bush Issues Executive Order Designating ITER International Fusion Energy Organization A Public Interest Organization News Featured Articles Science Headlines 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Presentations & Testimony News Archives Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 11.19.07 President Bush Issues Executive Order Designating ITER International Fusion Energy Organization A Public Interest Organization Print Text Size: A A A Subscribe FeedbackShare Page November 19, 2007 The White House today announced that President Bush has issued an Executive Order designating the ITER International Fusion Energy Organization as a public international organization. For the purposes of the International

23

International linear collider reference design report  

E-Print Network [OSTI]

magnet designs. Estimates of EDIA labor costs were basedthe materials, fabrication and EDIA labor fractions are wellThe fractional distribution of EDIA among several types of

Aarons, G.

2008-01-01T23:59:59.000Z

24

International Effort Advances Offshore Wind Turbine Design Codes  

Broader source: Energy.gov [DOE]

For the past several years, DOE's National Renewable Energy Laboratory has teamed with the Fraunhofer Institute for Wind Energy and Energy System Technology in Germany to lead an international effort under the International Energy Agency’s Task 30 to improve the tools used to design offshore wind energy systems.

25

INTERNATIONAL DESIGN CONFERENCE -DESIGN 2012 Dubrovnik -Croatia, May 21 -24, 2012.  

E-Print Network [OSTI]

1 INTERNATIONAL DESIGN CONFERENCE - DESIGN 2012 Dubrovnik - Croatia, May 21 - 24, 2012. A NEW METHODOLOGY FOR ADVANCED ENGINEERING DESIGN: LESSONS FROM EXPERIMENTING C-K THEORY DRIVEN TOOLS S. Hooge, M. Agogué, and T. Gillier Keywords: C-K design theory, NPD management, knowledge management

Paris-Sud XI, Université de

26

Design and operation of internal dosimetry programs  

SciTech Connect (OSTI)

The proposed revision to USNRC 10 CFR 20 and the USDOE Order 5480.11 require intakes of radioactive material to be evaluated. Radiation dose limits are based on the sum of effective dose equivalent from intakes and the whole body dose from external sources. These significant changes in the regulations will require, at a minimum, a complete review of personnel monitoring programs to determine their adequacy. In this session we will review a systematic method of designing a routine personnel monitoring program that will comply with the requirements of the new regulations. Specific questions discussed are: (a) What are the goals and objectives of a routine personnel monitoring program (b) When is a routine personnel monitoring program required (c) What are the required capabilities of the routine personnel monitoring program (d) What should be done with the information generated in a personnel monitoring program Specific recommendations and interpretations are given in the session. 5 refs., 3 figs., 33 tabs.

LaBone, T.R.

1991-01-01T23:59:59.000Z

27

BNL | ICS Spectrum  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Demonstration of Mass-shift and High Harmonics in ICS X-ray Spectrum The recent improvements in the ATF's CO2 laser, in particular, using CO2 isotopes for the picosecond pulse...

28

On Enhancing Power Benefits in 3D ICs: Block Folding and Bonding Styles Perspective  

Science Journals Connector (OSTI)

Low power is widely considered as a key benefit of 3D ICs, yet there have been few thorough design studies on how to maximize power benefits in 3D ICs. In this paper, we present design methodologies to reduce power consumption in 3D ICs using a large-scale ... Keywords: 3D IC, block folding, bonding style, power benefit

Moongon Jung, Taigon Song, Yang Wan, Yarui Peng, Sung Kyu Lim

2014-06-01T23:59:59.000Z

29

ORISE: Incident Command System (ICS) Training  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Incident Command System (ICS) Training Incident Command System (ICS) Training The Oak Ridge Institute for Science and Education (ORISE) supports the emergency response community by promoting interagency cooperation and developing training that enhances response efforts. An example of such support involves the U.S. Department of Energy (DOE) Office of Emergency Response and its compliance efforts toward the Homeland Security Presidential Directive-5 (HSPD-5), which includes the implementation of National Incident Management System (NIMS)/Incident Command System (ICS) and the National Response Framework (NRF). The ICS, which has been recognized for its training curricula that has exceeded national standards, is an on-scene, all-hazard incident management concept that was originally designed for emergency management agencies, but

30

The IC Brazil ecosystem  

Science Journals Connector (OSTI)

Brazilian Government has done a strong effort to develop the Microelectronics area in Brazil. An ecosystem of communities interested to rethink the insertion of Brazil in the important market of semiconductors. Important questions should be considered ... Keywords: IC projects, IT ecosystems and e-government, collaborative ecosystems, education, semiconductors

Oscar S. Silva Filho

2013-10-01T23:59:59.000Z

31

Hardware Security through Design Obfuscation.  

E-Print Network [OSTI]

??Security of integrated circuits (ICs) has emerged as a major concern at different stages of IC life-cycle, spanning design, test, fabrication and deployment. Modern ICs… (more)

Chakraborty, Rajat Subhra

2010-01-01T23:59:59.000Z

32

Remote Activation of ICs for Piracy Prevention and Digital Right Management  

E-Print Network [OSTI]

]. IC metering involves a set of security protocols that enables the design house to gain post-fabrication control through passive or active counts of produced ICs, through the monitoring of IC properties and use the watermarked IP. With passive metering, each IC is uniquely registered into a database, so a suspicious chip

33

Hydrogen in Type Ic Supernovae?  

E-Print Network [OSTI]

By definition, a Type Ic supernova (SN Ic) does not have conspicuous lines of hydrogen or helium in its optical spectrum. SNe Ic usually are modelled in terms of the gravitational collapse of bare carbon-oxygen cores. We consider the possibility that the spectra of ordinary (SN 1994I-like) SNe Ic have been misinterpreted, and that SNe Ic eject hydrogen. An absorption feature usually attributed to a blend of Si II 6355 and C II 6580 may be produced by H-alpha. If SN 1994I-like SNe Ic eject hydrogen, the possibility that hypernova (SN 1998bw-like) SNe Ic, some of which are associated with gamma-ray bursts, also eject hydrogen should be considered. The implications of hydrogen for SN Ic progenitors and explosion models are briefly discussed.

David Branch; David J. Jeffery; Timothy R. Young; E. Baron

2006-05-09T23:59:59.000Z

34

International Effort Advances Offshore Wind Turbine Design Codes...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

with the Fraunhofer Institute for Wind Energy and Energy System Technology (IWES) in Germany to lead an international effort under the International Energy Agency's (IEA) Task 30...

35

Synthesis of Trustable ICs using Untrusted CAD Tools Miodrag Potkonjak  

E-Print Network [OSTI]

Synthesis of Trustable ICs using Untrusted CAD Tools Miodrag Potkonjak Computer Science Department the first technique for synthesis of trustable ICs using untrusted CAD tools. The approach enables the use of CAD tools for difficult synthesis tasks and very simple trusted tools developed by the designer

Potkonjak, Miodrag

36

Design of battery pack and internal combustion engine thermal models for hybrid electric vehicles.  

E-Print Network [OSTI]

?? This thesis focuses on the design of computational models, capable of simulating the thermal behaviour of a battery pack and internal combustion engine equipping… (more)

Catacchio, Gabriele

2013-01-01T23:59:59.000Z

37

IWODE09 -International Workshop on Organizational Design and Engineering December 11-12, 2009. Lisbon, Portugal  

E-Print Network [OSTI]

learning, we can build computational models that simulate the effects of organizational disruptionsIWODE09 - International Workshop on Organizational Design and Engineering December 11-12, 2009. Lisbon, Portugal SENSIBLE ORGANIZATIONS: A SENSOR-BASED SYSTEM FOR ORGANIZATIONAL DESIGN

38

International Linear Collider Technical Design Report (Volumes 1 through 4)  

SciTech Connect (OSTI)

The design report consists of four volumes: Volume 1, Executive Summary; Volume 2, Physics; Volume 3, Accelerator (Part I, R and D in the Technical Design Phase, and Part II, Baseline Design); and Volume 4, Detectors.

Harrison M.

2013-03-27T23:59:59.000Z

39

INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 05 MELBOURNE, AUGUST 15 18, 2005  

E-Print Network [OSTI]

integrating this fact. TRIZ [2] proposes to answer this lack by focusing the design on a problem framing made of several tools and methods to guide the inventive design process by a problem-focused approach1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 05 MELBOURNE, AUGUST 15 ­ 18, 2005 A FORMAL

Paris-Sud XI, Université de

40

Proceedings of IDETC/CIE 2013 ASME 2013 International Design Engineering Technical Conferences &  

E-Print Network [OSTI]

Proceedings of IDETC/CIE 2013 ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference August 4-7, 2013, Portland, USA DETC2013-12620 AUTOMATICALLY INFERRING METRICS FOR DESIGN CREATIVITY Mark Fuge Berkeley Institute of Design Dept. of Mechanical

Fuge, Mark

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Interim Design Report for the International Design Study for a Neutrino Factory  

SciTech Connect (OSTI)

The starting point for the International Design Study for the Neutrino Factory (the IDS-NF) was the output of the earlier International Scoping Study for a future Neutrino Factory and super-beam facility (the ISS). The accelerator facility described in section 2 incorporates the improvements that have been derived from the substantial amount of work carried out within the Accelerator Working Group. Highlights of these improvements include: (1) Initial concepts for the implementation of the proton driver at each of the three example sites, CERN, FNAL, and RAL; (2) Detailed studies of the energy deposition in the target area; (3) A reduction in the length of the muon beam phase-rotation and bunching systems; (4) Detailed analyses of the impact of the risk that stray magnetic field in the accelerating cavities in the ionization cooling channel will reduce the maximum operating gradient. Several alternative ionization-cooling lattices have been developed as fallback options to mitigate this technical risk; (5) Studies of particle loss in the muon front-end and the development of strategies to mitigate the deleterious effects of such losses; (6) The development of more complete designs for the muon linac and re-circulating linacs; (7) The development of a design for the muon FFAG that incorporates insertions for injection and extraction; and (8) Detailed studies of diagnostics in the decay ring. Other sub-systems have undergone a more 'incremental' evolution; an indication that the design of the Neutrino Factory has achieved a degree of maturity. The design of the neutrino detectors described in section 3 has been optimized and the Detector Working Group has made substantial improvements to the simulation and analysis of the Magnetized Iron Neutrino Detector (MIND) resulting in an improvement in the overall neutrino-detection efficiency and a reduction in the neutrino-energy threshold. In addition, initial consideration of the engineering of the MIND has generated a design that is feasible and a finite element analysis of the toroidal magnetic field to produce a realistic field map has been carried out. Section 3 also contains, for the first time, a specification for the near-detector systems and a demonstration that the neutrino flux can be determined with a precision of 1% through measurements of inverse muon decay at the near detector. The performance of the facility, the work of the Physics and Performance Evaluation Group, is described in section 1. The effect of the improved MIND performance is to deliver a discovery reach for CP-invariance violation in the lepton sector, the determination of the mass hierarchy, and of {theta}{sub 13} that extends down to values of sin{sup 2} 2{theta}{sub 13} {approx} 5 x 10{sup -5} and is robust against systematic uncertainties. In addition, the improved neutrino-energy threshold has allowed an indicative analysis of the kind of re-optimization of the facility that could be carried out should {theta}{sub 13} be found close to the current upper bound. The results presented in section 1 demonstrate that the discovery reach as well as the precision with which the oscillation parameters can be measured at the baseline Neutrino Factory is superior to that of other proposed facilities for all possible values of sin{sup 2} 2{theta}{sub 13}.

Choubey, S.; Gandhi, R.; Goswami, S.; /Harish-Chandra Res. Inst.; Berg, J.S.; Fernow, R.; Gallardo, J.C.; Gupta, R.; Kirk, H.; Simos, N.; Souchlas, N.; /Brookhaven; Ellis, M.; /Brunel U. /CERN /Durham U., IPPP /Fermilab /Geneva U. /Glasgow U. /Heidelberg, Max Planck Inst. /Imperial Coll., London /Jefferson Lab /Saha Inst.

2011-10-01T23:59:59.000Z

42

Robust design of nonlinear internal models without adaptation  

Science Journals Connector (OSTI)

We propose a solution to the problem of semiglobal output regulation for nonlinear minimum-phase systems driven by uncertain exosystems that does not rely upon conventional adaptation schemes to estimate the frequency of the exogenous signals. Rather, ... Keywords: Nonlinear internal model principle, Nonlinear observers, Nonlinear output regulation, Robust control

Alberto Isidori; Lorenzo Marconi; Laurent Praly

2012-10-01T23:59:59.000Z

43

Design principles for internal domain-specific languages: a pattern catalog illustrated by Ruby  

Science Journals Connector (OSTI)

Some programming languages, especially dynamic programming languages, offer suitable mechanisms for the construction of internal domain-specific languages (DSL). Internal DSLs inherit the facilities of their host language such as the availability of ... Keywords: design principles, domain-specific languages, dynamic programming languages

Sebastian Günther; Thomas Cleenewerck

2010-10-01T23:59:59.000Z

44

PUBLISHED VERSION Design, performance, and grounding aspects of the International Thermonuclear Experimental  

E-Print Network [OSTI]

PUBLISHED VERSION Design, performance, and grounding aspects of the International Thermonuclear, performance, and grounding aspects of the International Thermonuclear Experimental Reactor ion cyclotron range Thermonuclear Experimental Reactor ion cyclotron range of frequencies antenna F. Durodie,1,a) P. Dumortier,1 M

45

1 ICS 614 Projects (v.1) STRUCTURAL ISSUES  

E-Print Network [OSTI]

1 ICS 614 Projects (v.1) STRUCTURAL ISSUES: 1. PATIENT IDENTIFICATION The bedeviling problem" and "information technology" in medicine? PROJECTS WITH AN INTERNATIONAL TWIST: 6. FINANCE Corruption in health Macro-health economics: How much should a country spend on health? 3% of GDP, 6% of GDP, 14% of GDP

Reed, Nancy E.

46

Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference  

E-Print Network [OSTI]

Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011 August 29-31, 2011, Washington, DC, USA DETC2011-48595 CREATIVITY AND LONG-TERM POTENTIATION: IMPLICATIONS FOR DESIGN Gregory M. Hallihan hallihan@mie.utoronto.ca L

Shu, Lily H.

47

ICED'09/Paper number (Contribution ID) 1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09  

E-Print Network [OSTI]

ICED'09/Paper number (Contribution ID) 1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09 24 - 27 AUGUST 2009, STANFORD UNIVERSITY, STANFORD, CA, USA CREATIVITY THEORIES AND SCIENTIFIC DISCOVERY: A STUDY OF C-K THEORY AND INFUSED DESIGN ABSTRACT Creativity is central to human activity

Shai, Offer

48

Geosynthetics International, 2010, 17, No.3 Design of a landfill final cover system  

E-Print Network [OSTI]

Geosynthetics International, 2010, 17, No.3 Design of a landfill final cover system T. D. Stark containment, Strength, Stability, Shearbox test, Failure, Final cover system, Landfill REFERENCE: Stark, T. D. & Newman, E. J. (20 I0). Design of a landfill final cover systcm. Geosynthetics [ntemational17, No.3, 124

49

Table 1: Specifications for Federal Indirect Cost Data: Expense Function, IC Location, and IC Rate Description  

E-Print Network [OSTI]

­ Ship Operation 2401 2400 Research 2600 Other Sponsored Projects IC Rate in effect during period: IC Rate in effect during period: IC Rate in effect during period: Competitive Award NOA Date: 6/09/04 - 6

Hone, James

50

UCI International Center 500 E. Peltason Drive, Irvine, CA 926975255 P: 949.824.7249 F: 949.824.3090 intl@uci.edu www.ic.uci.edu IC Office Use Only: Date Received: __________ Advisor's Initials: ___________ Ready for PickUp On: _________________ | Revised  

E-Print Network [OSTI]

UCI International Center 500 E. Peltason Drive, Irvine, CA 926975255 P: 949.824.7249 F: 949, Irvine, CA 926975255. NOTE: A NEW I20/DS2019 WILL BE ISSUED WITHIN 10 BUSINESS DAYS OF TRANSFER RELEASE

Barrett, Jeffrey A.

51

GENERAL@ELECTtiIC COMPINY  

Office of Legacy Management (LM)

GENERAL@ELECTtiIC GENERAL@ELECTtiIC COMPINY ~9013 ~APPROVAL NO. 143 Article II, Section 8(b) PICHLAND, WASHINGTON .~. "ANFORD ATOMlC PlOD"CTS O*Ert*,ION ,. u/S; Atomic Energy Comisaion Hailfbrd operations Office Richland, Washington Attention: Mr. J. E. Travis, Manager Gentlemen: EXTRUSION OF URANIUM DIOXIDE FOR GENERAL ~ED&'RIC - APED The Atoinic Power Equipment Depart!++ of ~the The uranium dioxide necess :Material License No. C-3351. for establishing the value'of the.material will be developed with appropriate representatives of your office in accordance with established procedures. A small amount of scrap will be generated in the process but, since this will be usable and is needed in waging studies at Hanford, we do not propose to charge for reprocessing.

52

Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference  

E-Print Network [OSTI]

economic and environmental sense. Ideally, engineers would aim for the shared space where environmentalProceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2009 August 30 ­ September 2, 2009, San Diego, California, U

Agogino, Alice M.

53

1 Copyright 2011 by ASME Proceedings of the ASME 2011 International Design Engineering Technical Conferences &  

E-Print Network [OSTI]

solutions in a global, economic, environmental, and societal context," [1]. Providing engineering students, social, economic and environmental issues in engineering, with no funds to support the actual overseas1 Copyright © 2011 by ASME Proceedings of the ASME 2011 International Design Engineering Technical

Lewis, Kemper E.

54

INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001  

E-Print Network [OSTI]

INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001 TRANSFERRING; technology transfer 1 Introduction Some ten years ago Rolls-Royce decided that to strengthen its capability systems of the two companies by means of `technology transfer'. This paper will take a holistic view

Kelly, Tim

55

INTERNATIONAL DESIGN STRUCTURE MATRIX CONFERENCE, DSM'09 12 13 OCTOBER 2009, GREENVILLE, SOUTH CAROLINA, USA  

E-Print Network [OSTI]

DSM'09 11 TH INTERNATIONAL DESIGN STRUCTURE MATRIX CONFERENCE, DSM'09 12 ­ 13 OCTOBER 2009, GREENVILLE, SOUTH CAROLINA, USA DISTRIBUTED MODELING OF COMPONENT DSM Andrew Tilstra1 , 1 and 1 1 The University of Texas at Austin Keywords: Component DSM, HD-DSM, interaction types, distributed modeling

Seepersad, Carolyn Conner

56

Conference scope and theme The 1st International Smart Design conference aims to provide a  

E-Print Network [OSTI]

Conference scope and theme The 1st International Smart Design conference aims to provide a timely. Posters The conference includes a poster session which will provide students with the opportunity for the best poster. Conference sponsored by PepsiCo Europe Poster submission / areas of interest Topics

Evans, Paul

57

Optimisation of seismic network design: Application to a geophysical international lunar network  

E-Print Network [OSTI]

Optimisation of seismic network design: Application to a geophysical international lunar network. Informations about lunar seismicity and seismic subsurface models from the Apollo missions are used as a priori information in this study to optimise the geometry of future lunar seismic networks in order to best resolve

Sambridge, Malcolm

58

ICED'09/373 1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09  

E-Print Network [OSTI]

ICED'09/373 1 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09 24 - 27 AUGUST 2009, STANFORD UNIVERSITY, STANFORD, CA, USA CREATIVITY THEORIES AND SCIENTIFIC DISCOVERY: A STUDY OF C-K THEORY AND INFUSED Creativity is central to human activity and is a powerful force in personal and organizational success

Reich, Yoram

59

The Muon LINAC for the International Design Study of the Neutrino Factory  

SciTech Connect (OSTI)

The first stage of muon acceleration in the Neutrino Factory utilises a superconducting linac to accelerate muons from 244 MeV to 900 MeV. The linac was split into three types of cryomodules with decreasing magnetic fields and increasing amounts of RF voltage but with the design of the superconducting solenoid and RF cavities being the same for all cryomodules. The current status of the muon linac for the International Design Study for the Neutrino Factory will be presented including a final lattice design of the linac and tracking simulations.

A. Kurup, C. Bontoiu, Morteza Aslaninejad, J. Pozimski, A. Bogacz, V.S. Morozov, Y.R. Roblin, K.B. Beard

2011-09-01T23:59:59.000Z

60

Handbookfor International Students at ETH Zurich Please note  

E-Print Network [OSTI]

Handbookfor International Students at ETH Zurich #12;Please note: This booklet was designed for twoSTudyIng aT ETH ZurIcH 49lIFE on camPuS 58camPuS maPS 60mIScEllanEouS InFormaTIon 63IndEx Content #12;ETH Zurich Main Building Campus Hönggerberg (Science City) #12;Dear international student

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

TestosterICs: A Low-Cost Functional Chip Tester David Harris and David Diaz  

E-Print Network [OSTI]

TestosterICs: A Low-Cost Functional Chip Tester David Harris and David Diaz Department of Engineering Harvey Mudd College Claremont, CA 91711 David_Harris@hmc.edu Abstract Students in VLSI design

Harris, David Money

62

Microsoft Word - CT_Specifications_IC antenna Eng support v2...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ITERDQ4KZ3V Page 3 of 7 1 Abstract This document describes technical needs of the Ion Cyclotron Heating and Current Drive (IC H&CD) section in engineering support to design the...

63

Poster presentations for first International Design Course Poster presentations will be held by Tokyo Tech students at Schlumberger K. K.  

E-Print Network [OSTI]

Poster presentations for first International Design Course Poster presentations will be held (Japan). The poster session will be held from 9:00 to 15:00 on April 7th , and Tokyo Tech academic

64

LES Modeling for IC Engines  

Broader source: Energy.gov [DOE]

Large eddy simulation offers better accuracy and sensitivity to study cyclic variability, mode transition and mixing effects in engine design and operation

65

BORON SYNTHESIS IN TYPE Ic SUPERNOVAE  

SciTech Connect (OSTI)

We investigate the {nu}-process in an energetic Type Ic supernova (SN Ic) and the resultant productions of the light elements including boron and its stable isotopes. SN Ic is a very unique boron source because it can produce boron not only through spallation reactions as discussed in Nakamura and Shigeyama but also the {nu}-process. The {nu}-process is considered to occur in core-collapse supernovae and previous studies were limited to SNe II. Although the progenitor star of an SN Ic does not posses an He envelope so that {sup 7}Li production via the {nu}-process is unlikely, {sup 11}B can be produced in the C-rich layers. We demonstrate a hydrodynamic simulation of a SN Ic explosion and estimate the amounts of the light elements produced via the {nu}-process for the first time, and also the subsequent spallation reactions between the outermost layers of the compact SN Ic progenitor and the ambient medium. We find that the {nu}-process in the current SN Ic model produces a significant amount of {sup 11}B, which is diluted by {sup 10}B from spallation reactions to get closer to B isotopic ratios observed in meteorites. We also confirm that high-temperature {mu} and {tau} neutrinos and their anti-neutrinos, reasonably suggested from the compact structure of SN Ic progenitors, enhance the light-element production through the neutral current reactions, which may imply an important role of SNe Ic in the Galactic chemical evolution.

Nakamura, Ko; Kajino, Toshitaka [National Astronomical Observatory of Japan, Mitaka, Tokyo (Japan); Yoshida, Takashi; Shigeyama, Toshikazu [Department of Astronomy, Graduate School of Science, University of Tokyo, Tokyo (Japan)

2010-08-01T23:59:59.000Z

66

Development of mathematical pediatric phantoms for internal dose calculations: designs, limitations, and prospects  

SciTech Connect (OSTI)

Mathematical phantoms of the human body at various ages are employed with Monte Carlo radiation transport codes for calculation of photon specific absorbed fractions. The author has developed a pediatric phantom series based on the design of the adult phantom, but with explicit equations for each organ so that organ sizes and marrow distributions could be assigned properly. Since the phantoms comprise simple geometric shapes, predictive dose capability is limited when geometry is critical to the calculation. Hence, there is a demand for better phantom design in situations where geometry is critical, such as for external irradiation or for internal emitters with low energy photons. Recent advances in computerized axial tomography (CAT) present the potential for derivation of anatomical information, which is so critical to development of phantoms, and ongoing developmental work on compuer architecture to handle large arrays for Monte Carlo calculations should make complex-geometry dose calculations economically feasible within this decade.

Cristy, M.

1980-01-01T23:59:59.000Z

67

I&C Modeling in SPAR Models  

SciTech Connect (OSTI)

The Standardized Plant Analysis Risk (SPAR) models for the U.S. commercial nuclear power plants currently have very limited instrumentation and control (I&C) modeling [1]. Most of the I&C components in the operating plant SPAR models are related to the reactor protection system. This was identified as a finding during the industry peer review of SPAR models. While the Emergency Safeguard Features (ESF) actuation and control system was incorporated into the Peach Bottom Unit 2 SPAR model in a recent effort [2], various approaches to expend resources for detailed I&C modeling in other SPAR models are investigated.

John A. Schroeder

2012-06-01T23:59:59.000Z

68

Interim report on the Global Design Effort Global International Linear Collider (ILC) R&D  

SciTech Connect (OSTI)

The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

Harrison, M.

2011-04-30T23:59:59.000Z

69

IFMIF, International Fusion Materials Irradiation Facility conceptual design activity cost report  

SciTech Connect (OSTI)

This report documents the cost estimate for the International Fusion Materials Irradiation Facility (IFMIF) at the completion of the Conceptual Design Activity (CDA). The estimate corresponds to the design documented in the Final IFMIF CDA Report. In order to effectively involve all the collaborating parties in the development of the estimate, a preparatory meeting was held at Oak Ridge National Laboratory in March 1996 to jointly establish guidelines to insure that the estimate was uniformly prepared while still permitting each country to use customary costing techniques. These guidelines are described in Section 4. A preliminary cost estimate was issued in July 1996 based on the results of the Second Design Integration Meeting, May 20--27, 1996 at JAERI, Tokai, Japan. This document served as the basis for the final costing and review efforts culminating in a final review during the Third IFMIF Design Integration Meeting, October 14--25, 1996, ENEA, Frascati, Italy. The present estimate is a baseline cost estimate which does not apply to a specific site. A revised cost estimate will be prepared following the assignment of both the site and all the facility responsibilities.

Rennich, M.J. [comp.

1996-12-01T23:59:59.000Z

70

Proceedings of the international workshop on engineering design of next step reversed field pinch devices  

SciTech Connect (OSTI)

These Proceedings contain the formal contributed papers, the workshop papers and workshop summaries presented at the International Workshop on Engineering Design of Next Step RFP Devices held at Los Alamos, July 13-17, 1987. Contributed papers were presented at formal sessions on the topics: (1) physics overview (3 papers); (2) general overview (3 papers); (3) front-end (9 papers); (4) computer control and data acquisition (1 paper); (5) magnetics (5 papers); and (6) electrical design (9 papers). Informal topical workshop sessions were held on the topics: (1) RFP physics (9 papers); (2) front-end (7 papers); (3) magnetics (3 papers); and (4) electrical design (1 paper). This volume contains the summaries written by the Chairmen of each of the informal topical workshop sessions. The papers in these Proceedings represent a significant review of the status of the technical base for the engineering design of the next step RFP devices being developed in the US, Europe, and Japan, as of this date.

Thomson, D.B. (comp.)

1987-11-01T23:59:59.000Z

71

Reactor Design and Decommissioning - An Overview of International Activities in Post Fukushima Era1 - 12396  

SciTech Connect (OSTI)

Accidents at the Fukushima Dai-ichi reactors as a result of the devastating earthquake and tsunami of March 11, 2011 have not only dampened the nuclear renaissance but have also initiated a re-examination of the design and safety features for the existing and planned nuclear reactors. Even though failures of some of the key site features at Fukushima can be attributed to events that in the past would have been considered as beyond the design basis, the industry as well as the regulatory authorities are analyzing what features, especially passive features, should be designed into the new reactor designs to minimize the potential for catastrophic failures. It is also recognized that since the design of the Fukushima BWR reactors which were commissioned in 1971, many advanced safety features are now a part of the newer reactor designs. As the recovery efforts at the Fukushima site are still underway, decisions with respect to the dismantlement and decommissioning of the damaged reactors and structures have not yet been finalized. As it was with Three Mile Island, it could take several decades for dismantlement, decommissioning and clean up, and the project poses especially tough challenges. Near-term assessments have been issued by several organizations, including the IAEA, the USNRC and others. Results of such investigations will lead to additional improvements in system and site design measures including strengthening of the anti-tsunami defenses, more defense-in-depth features in reactor design, and better response planning and preparation involving reactor sites. The question also arises what would the effect be on the decommissioning scene worldwide, and what would the effect be on the new reactors when they are eventually retired and dismantled. This paper provides an overview of the US and international activities related to recovery and decommissioning including the decommissioning features in the reactor design process and examines these from a new perspective in the post Fukushima -accident era. Accidents at the Fukushima Daiichi reactors in the aftermath of the devastating earthquake and tsunami of March 11, 2011 have slowed down the nuclear renaissance world-wide and may have accelerated decommissioning either because some countries have decided to halt or reduce nuclear, or because the new safety requirements may reduce life-time extensions. Even in countries such as the UK and France that favor nuclear energy production existing nuclear sites are more likely to be chosen as sites for future NPPs. Even as the site recovery efforts continue at Fukushima and any decommissioning decisions are farther into the future, the accidents have focused attention on the reactor designs in general and specifically on the Fukushima type BWRs. The regulatory authorities in many countries have initiated a re-examination of the design of the systems, structures and components and considerations of the capability of the station to cope with beyond-design basis events. Enhancements to SSCs and site features for the existing reactors and the reactors that will be built will also impact the decommissioning phase activities. The newer reactor designs of today not only have enhanced safety features but also take into consideration the features that will facilitate future decommissioning. Lessons learned from past management and operation of reactors as well as the lessons from decommissioning are incorporated into the new designs. However, in the post-Fukushima era, the emphasis on beyond-design-basis capability may lead to significant changes in SSCs, which eventually will also have impact on the decommissioning phase. Additionally, where some countries decide to phase out the nuclear power, many reactors may enter the decommissioning phase in the coming decade. While the formal updating and expanding of existing guidance documents for accident cleanup and decommissioning would benefit by waiting until the Fukushima project has progressed sufficiently for that experience to be reliably interpreted, the development of structured on-li

Devgun, Jas S. [Nuclear Power Technologies, Sargent and Lundy LLC, Chicago, IL (United States); Laraia, Michele [private consultant, formerly from IAEA, Kolonitzgasse 10/2, 1030, Vienna (Austria); Pescatore, Claudio [OECD, Nuclear Energy Agency, Issy-les-Moulineaux, Paris (France); Dinner, Paul [International Atomic Energy Agency, Wagramerstrasse 5, A-1400 Vienna (Austria)

2012-07-01T23:59:59.000Z

72

Dr. Edward Smith Director, International Center  

E-Print Network [OSTI]

Dr. Edward Smith Director, International Center Robinson 117 Rowan University President, Delta or at ic@rowan.edu. Sincerely, Edward C. Smith III

Rusu, Adrian

73

Design and Implementation of an International Training Program on Repository Development and Management  

SciTech Connect (OSTI)

Korea Hydro and Nuclear Power Co., Ltd. (KHNP) is an electric company in the Republic of Korea with twenty operational nuclear power plants and eight additional units that are either planned or currently under construction. Regulations require that KHNP manage the radioactive waste generated by their nuclear power plants. In the course of planning low, intermediate, and high level waste storage facilities, KHNP sought interaction with an acknowledged expert in the field of radioactive waste management and, consequently, contacted Sandia National Laboratories (SNL). KHNP has contracted with SNL to provide a year long training program on repository science. This paper discusses the design of the curriculum, specific plans for execution of the training program, and recommendations for smooth implementation of international training programs. (authors)

Vugrin, K.W. [Sandia National Laboratories Carlsbad Programs Group, Performance Assessment and Decision Analysis Department, Carlsbad, NM (United States); Twitchell, Ch.A. [Sandia National Laboratories, Carlsbad Programs Group, Center Business Operations Department, Carlsbad, NM (United States)

2008-07-01T23:59:59.000Z

74

ATLAS-SCT Bipolar Amplifier-Discriminator IC Specification Version 4.01 13-Jan-1999 Project Specification  

E-Print Network [OSTI]

______________________________________________________________________________________ ______________________________________________________________________________________ ATLAS-SCT Bipolar Amplifier-Discriminator IC Specification Version 4.01 13-Jan-1999 Project ______________________________________________________________________________________ ______________________________________________________________________________________ ATLAS-SCT Bipolar Amplifier-Discriminator IC Specification Version 4.01 13-Jan-1999 1. Scope: Establish Circuit to be used as part of the Binary Readout of the ATLAS Semi-Conductor Tracker (SCT). This design

California at Santa Cruz, University of

75

Abstract--3D IC technologies have recently attracted great attention due to the potential performance improvement, power  

E-Print Network [OSTI]

Abstract--3D IC technologies have recently attracted great attention due to the potential a 3D physical design flow based on OpenAccess (named 3D-Craft) to facilitate the rapid adoption of 3D IC technologies. The OpenAccess extension for 3D-Craft is discussed, and the key components including

Cong, Jason "Jingsheng"

76

7th International Symposium of Ayurveda and Health Designer Medicine Beyond Genes  

E-Print Network [OSTI]

Suites By Hilton in Farmington, will be holding guestrooms for the International Symposium of Ayurveda

Oliver, Douglas L.

77

Safeguards Guidance Document for Designers of Commercial Nuclear Facilities: International Nuclear Safeguards Requirements and Practices For Uranium Enrichment Plants  

SciTech Connect (OSTI)

This report is the second in a series of guidelines on international safeguards requirements and practices, prepared expressly for the designers of nuclear facilities. The first document in this series is the description of generic international nuclear safeguards requirements pertaining to all types of facilities. These requirements should be understood and considered at the earliest stages of facility design as part of a new process called “Safeguards-by-Design.” This will help eliminate the costly retrofit of facilities that has occurred in the past to accommodate nuclear safeguards verification activities. The following summarizes the requirements for international nuclear safeguards implementation at enrichment plants, prepared under the Safeguards by Design project, and funded by the U.S. Department of Energy (DOE) National Nuclear Security Administration (NNSA), Office of NA-243. The purpose of this is to provide designers of nuclear facilities around the world with a simplified set of design requirements and the most common practices for meeting them. The foundation for these requirements is the international safeguards agreement between the country and the International Atomic Energy Agency (IAEA), pursuant to the Treaty on the Non-proliferation of Nuclear Weapons (NPT). Relevant safeguards requirements are also cited from the Safeguards Criteria for inspecting enrichment plants, found in the IAEA Safeguards Manual, Part SMC-8. IAEA definitions and terms are based on the IAEA Safeguards Glossary, published in 2002. The most current specification for safeguards measurement accuracy is found in the IAEA document STR-327, “International Target Values 2000 for Measurement Uncertainties in Safeguarding Nuclear Materials,” published in 2001. For this guide to be easier for the designer to use, the requirements have been restated in plainer language per expert interpretation using the source documents noted. The safeguards agreement is fundamentally a legal document. As such, it is written in a legalese that is understood by specialists in international law and treaties, but not by most outside of this field, including designers of nuclear facilities. For this reason, many of the requirements have been simplified and restated. However, in all cases, the relevant source document and passage is noted so that readers may trace the requirement to the source. This is a helpful living guide, since some of these requirements are subject to revision over time. More importantly, the practices by which the requirements are met are continuously modernized by the IAEA and nuclear facility operators to improve not only the effectiveness of international nuclear safeguards, but also the efficiency. As these improvements are made, the following guidelines should be updated and revised accordingly.

Robert Bean; Casey Durst

2009-10-01T23:59:59.000Z

78

Microsoft Word - S06401_IC.doc  

Office of Legacy Management (LM)

Photos of T Building Rooms with Special ICs Photos of T Building Rooms with Special ICs This page intentionally left blank U.S. Department of Energy Annual Assessment of the Effectiveness of Site-Wide Institutional Controls June 2010 Doc. No. S06401 Page D-1 Figure D-1. T Building Rooms with Special ICs Annual Assessment of the Effectiveness of Site-Wide Institutional Controls U.S. Department of Energy Doc. No. S06401 June 2010 Page D-2 Figure D-2. T Bldg. Room 16 View A Figure D-3. T Bldg. Room 16 View B Figure D-4. T Bldg. Room 16 View C Figure D-5. T Bldg. Room 16 View D U.S. Department of Energy Annual Assessment of the Effectiveness of Site-Wide Institutional Controls June 2010 Doc. No. S06401 Page D-3 Figure D-6. T Bldg. Room 16 View E

79

U.S. Department of Energy and International Association of Lighting Designers Partner to Improve Energy Efficiency in Lighting Systems  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy (DOE) and the International Association of Lighting Designers (IALD) signed a Memorandum of Understanding (MOU) in November 2008 to work cooperatively toward improving the efficient use of energy by lighting equipment and systems. The MOU emphasizes the importance of minimizing the impact of energy use on the environment in support of DOE SSL programs on lighting quality.

80

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.  

E-Print Network [OSTI]

Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 · Pb-Free Plus Anneal Available (RoHS Compliant) Functional Block Diagrams DG211 Part Number-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which

Lanterman, Aaron

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Thermoelectric Conversion of Wate Heat to Electricity in an IC...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Wate Heat to Electricity in an IC Engine Powered Vehicle Thermoelectric Conversion of Wate Heat to Electricity in an IC Engine Powered Vehicle Presentation given at the 16th...

82

Electrical generation plant design practice intern experience at Power Systems Engineering, Inc.: an internship report  

E-Print Network [OSTI]

. One involved design of a 480 MW power plant. The other was the design of a 8.2 MW induction generator for cogeneration. The author's activities during this period can be categorized into two major areas. First, technically oriented...

Lee, Ting-Zern Joe, 1950-

2013-03-13T23:59:59.000Z

83

UNIDO ICS Portal for Technology Transfer | Open Energy Information  

Open Energy Info (EERE)

UNIDO ICS Portal for Technology Transfer UNIDO ICS Portal for Technology Transfer Jump to: navigation, search Tool Summary Name: UNIDO ICS Portal for Technology Transfer Agency/Company /Organization: United Nations Industrial Development Organization Sector: Energy Topics: Technology characterizations Resource Type: Dataset Website: portal.ics.trieste.it/Portal/Default.aspx References: UNIDO ICS Portal for Technology Transfer[1] This article is a stub. You can help OpenEI by expanding it. References ↑ "UNIDO ICS Portal for Technology Transfer" Retrieved from "http://en.openei.org/w/index.php?title=UNIDO_ICS_Portal_for_Technology_Transfer&oldid=329335" Categories: Tools Stubs What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load)

84

International Conference on Advanced Materials: Cancun 2001 Design Considerations for a Hybrid AmorphousDesign Considerations for a Hybrid Amorphous  

E-Print Network [OSTI]

. Rocheleau Hawaii Natural Energy Institute School for Ocean and Earth Science and Technology University ­ Introduction and design advantages ­ Application of integrated model to hybrid photoelectrodes ­ Model System I and system losses for water-splitting. Efficiency ·Solar to hydrogen efficiency: ·D.O.E. goal of 10% at AM 1

85

International Lens Design Conference, Monterey, CA, June 11-14, 1990, Proceedings  

SciTech Connect (OSTI)

The present conference on lens design encompasses physical and geometrical optics, diffractive optics, the optimization of optical design, software packages, ray tracing, the use of artificial intelligence, the achromatization of materials, zoom optics, microoptics and GRIN lenses, and IR lens design. Specific issues addressed include diffraction-performance calculations in lens design, the optimization of the optical transfer function, a rank-down method for automatic lens design, applications of quadric surfaces, the correction of aberrations by using HOEs in UV and visible imaging systems, and an all-refractive telescope for intersatellite communications. Also addressed are automation techniques for optics manufacturing, all-reflective phased-array imaging telescopes, the thermal aberration analysis of a Nd:YAG laser, the analysis of illumination systems, athermalized FLIR optics, and the design of array systems using shared symmetry.

Lawrence, G.N. (Arizona University, Tucson (United States))

1990-01-01T23:59:59.000Z

86

International technology transfer to accomplish process engineering designs for power plants .  

E-Print Network [OSTI]

??Engineering design capabilities are highly specialised skills and are often begot through a number of years in a field of specialisation, the research’s aim is… (more)

Moganelwa, Annikie

2014-01-01T23:59:59.000Z

87

Internal conflicts through external design| Costuming the contradictions in "The Love Song of J. Robert Oppenheimer".  

E-Print Network [OSTI]

?? This project report examines the process undertaken and techniques utilized to accomplish historical accuracy and theatrical clarity in a costume design for The Love… (more)

Li, Lan

2012-01-01T23:59:59.000Z

88

INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 05 MELBOURNE, AUGUST 15-18, 2005  

E-Print Network [OSTI]

in getting utility instead of ownership. This concept characterizes the "Functional Economy". These new been very few publications on developing, extending or refining methods for designing PSS

Paris-Sud XI, Université de

89

Design Optimization International Conference, April 5 -April 7 2005, Las Palmas, Spain,  

E-Print Network [OSTI]

Analysis, Product Line E1, Volkswagen AG, Wolfsburg Key words: Automatic Differentiation, Optimisation design process. The design application consists in the optimisation of the topology of a duct of dissipated energy with respect to the duct topology. This gradient is provided by the adjoint of the solver

Giering, Ralf

90

Website design in an international context: The role of gender in masculine versus feminine oriented countries  

Science Journals Connector (OSTI)

Previous research confirms there are differences between men and women concerning website design preferences. A few researchers have further suggested website preferences based on gender (i.e. whether one is a man or a woman) differ in countries that are typically considered higher in masculinity versus higher in femininity. As such, this supposes fewer differences exist between men and women in more feminine societies, while more significant differences occur in more masculine societies. To test this assumption, we survey a total of 955 participants located in six countries. More particularly, we examine design constructs of Information Content, Navigation Design, Visual Design modeled to Website Trust and Website Satisfaction. We are interested to determine if gender differences are strong in higher masculinity countries and weak in lower masculinity countries. We also investigate if gender moderates the various relationships in our model. As predicted, in higher masculinity countries there are more differences between men and women, and gender is more likely to moderate the relationships in the model. This research has implications for the complexity of website design preferences, and extends earlier work on website design in a multiple country sample where masculinity–femininity differs. Theoretical contributions and design issues are elaborated.

Dianne Cyr; Milena Head

2013-01-01T23:59:59.000Z

91

Planes, trains, and automobiles--the San Juan International Airport : designing for intermodal access  

E-Print Network [OSTI]

This thesis explores how intermodal transportation centers may be designed so that balances may be incorporated between efficient modal connections and functionality, and basic human needs and comforts. The term "intermodal" ...

Kerr, Susannah

1996-01-01T23:59:59.000Z

92

1 Copyright 2007 by ASME Proceedings of the ASME 2007 International Design Engineering Technical Conferences&  

E-Print Network [OSTI]

of FMEA sheets. The designer can describe an integrated model of both functional knowledge and fault knowledge. Based on ontology mappings, automatic trans- formations of FMEA sheets can be realized

Mizoguchi, Riichiro

93

Accelerating Predictive Simulation of IC Engines with High Performance...  

Broader source: Energy.gov (indexed) [DOE]

IC engines with high performance computing (ACE017) This presentation does not contain any proprietary, confidential, or otherwise restricted information K. Dean Edwards, C....

94

Idaho IC 61-119, Electrical Corporation Definition | Open Energy...  

Open Energy Info (EERE)

Reference LibraryAdd to library Legal Document- StatuteStatute: Idaho IC 61-119, Electrical Corporation DefinitionLegal Abstract Definition of an Electrical Corporation under...

95

Insights Gained for Updating an Analog I&C System to a Digital System  

SciTech Connect (OSTI)

Licensees at both Nuclear Power Plants (NPPs) and Non-Power Reactors (NPRs) are increasing their use of state-of-the-art digital technology in instrumentation and control (I&C) systems because digital systems offer improved reactor control, information processing, and information storage over analog. Digital I&C systems can range from experimental systems for reactor control research (at NPRs), to measurement and display systems, to complete reactor console replacements. Because of the increasing difficulty in finding spare parts for their original analog I&C systems, many licensees have begun or have plans to upgrade, refurbish, or replace their old analog I&C systems with digital systems. The perception is that upgrading to a digital I&C system will solve all of a facility s obsolescence problems. However, licensees need to be aware of several issues associated with upgrading to a digital system including obsolescence of the digital system (hardware and software) because of the short product life cycle and the associated cost to acquire, store, and maintain a long-term supply of spare parts. Configuration management and cyber security are also vitally important for any upgrade. Further, it must be recognized that the introduction of software and microprocessors could create new failure mechanisms, such as software errors and increased susceptibility to electromagnetic interference. In fact, experience has shown that these failure mechanisms may cause the reactor to malfunction in a way not previously considered. Thus, a conversion from analog to digital I&C systems solves some problems while potentially introducing others. Recognition of the additional risks coupled with good design, engineering, review, and testing can identify and minimize these risks.

Adams, A. [U.S. Nuclear Regulatory Commission; Carte, N. [U.S. Nuclear Regulatory Commission; Hardesty, Duane [U.S. Nuclear Regulatory Commission; Hardin, LeRoy A [U.S. Nuclear Regulatory Commission; Wilson, Thomas L [ORNL

2012-01-01T23:59:59.000Z

96

Market Design and Price Behavior in Restructured Electricity Markets: An International Comparison  

E-Print Network [OSTI]

on Workable Energy Regulation (POWER). POWER is a program of the University of California Energy Institute of California Energy Institute 2539 Channing Way Berkeley, California 94720-5180 www.ucei.berkeley.edu/ucei #12 of market- clearing prices. Using evidence on the design of electricity markets in England and Wales, Norway

California at Berkeley. University of

97

EPDE2011/209 INTERNATIONAL CONFERENCE ON ENGINEERING AND PRODUCT DESIGN EDUCATION  

E-Print Network [OSTI]

from agile software development can be of benefit to development activities in projects of design software development, agile methods can be understood as a counter reaction to the age-long and dominating of lifestyle products. Keywords: Agile development, time boxing, scrum, team communication, double

Hansen, René Rydhof

98

Prometheus Reactor I&C Software Development Methodology, for Action  

SciTech Connect (OSTI)

The purpose of this letter is to submit the Reactor Instrumentation and Control (I&C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I&C Software Development Process Manual and Reactor Module Software Development Plan to NR for information.

T. Hamilton

2005-07-30T23:59:59.000Z

99

Demystifying 3D ICs: The pros and cons of going vertical An increasing number of integrated solutions involve the stacking of chips to reduce  

E-Print Network [OSTI]

between chips in a stack, making true 3D ICs a reality. Designers of integrated circuits need to be aware. Micro-bump technology involves the use of solder or gold bumps on the surface of the die to make

Davis, Rhett

100

Catal International Ltd | Open Energy Information  

Open Energy Info (EERE)

Catal International Ltd. Place: Sheffield, United Kingdom Zip: S10 3YT Sector: Hydro, Hydrogen Product: Catal has worked together with LIFE-IC on the "hydrogen producing steam...

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

A Non-scaling Fixed Field Alternating Gradient Accelerator for the Final Acceleration Stage of the International Design Study of the Neutrino Factory.  

SciTech Connect (OSTI)

The International Design Study of the Neutrino Factory (IDS-NF) has recently completed its Interim Design Report (IDR), which presents our current baseline design of the neutrino factory. To increase the efficiency and reduce the cost of acceleration, the IDR design uses a linear non-scaling fixed field alternating gradient accelerator (FFAG) for its final acceleration stage. We present the current lattice design of that FFAG, including the main ring plus its injection and extraction systems. We describe parameters for the main ring magnets, kickers, and septa, as well as the power supplies for the kickers. We present a first pass at an engineering layout for the ring and its subsystems.

Berg, J.S.; Aslaninejad, M.; Pasternak, J.; Witte, H.; Bliss, N. Cordwell M.; Jones, T.; Muir, A., Kelliher, D.; Machida, S.

2011-09-04T23:59:59.000Z

102

Instrumentation and Controls, IC, Accelerator Operations and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

development of devices for automated control and monitoring of accelerator components and distribution of timing signals; and design, development, installation, and maintenance of...

103

August 24~28, 2014 International Convention Center (ICC) Jeju, Jeju Island, Korea  

E-Print Network [OSTI]

Symposium on Future I&C for Nuclear Power Plants International Symposium on Symbiotic Nuclear Power Systems, Jeju Island, Korea International Symposium on Future I&C for Nuclear Power Plants International Symposium on Symbiotic Nuclear Power Systems ISOFIC/ISSNP 2014 www.isofic.org #12;Contents 04 06 06 07 09 10

104

Simulation Support for Optimizing the Design and Operation of a Large Open-Space Office Building  

E-Print Network [OSTI]

University of Technology PBA International Mech. Eng. Faculty Building Physics & Systems Prague 7 Prague 6, Czech Republic Eindhoven, Netherlands Czech Republic ABSTRACT This paper deals with design and post-design operational optimization studies... inverters. Some of the air is extracted ESL-IC-08-10-74 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 20 22 24 26 28 30 32 34 12.7 13.7 14.7 15.7 16.7 17.7 18.7 19.7 A i r t e m...

Lain, M.; Hensen, J.; Zemlicka, J.

105

Design and analysis of the internally cooled silicon mirrors and benders for wiggler sources at the Advanced Photon Source  

SciTech Connect (OSTI)

When silicon single crystal mirrors are bent to cylindrical figures of typically 6 km bending radius, the moments needed are very small and easy to disturb by cooling attachments to the sides of the mirror. Hence, we decided to abandon the conventional concept of cooling plates attached to the sides of the mirrors and instead have chosen to use internal water channels. We present here the design of mirrors with cooling channels near the neutral axis of the silicon beam that have a rather thick {open_quote}{open_quote}hot wall.{close_quote}{close_quote} The results of this analytical work are nonintuitive, regarding the stresses produced by wiggler heating. The design path chosen minimizes figure errors due to coolant pressure variations and residual stresses from machining and bonding of multiple layers of silicon. The geometry of the water channels avoids water-to-vacuum seals and uses the mirror bender as the coolant manifold. Engineering efforts, which reduce the bending stresses at bender-to-silicon interface by a factor of five, will be presented. The complete mirror bender and motion control mechanics will be shown. {copyright} {ital 1996 American Institute of Physics.}

Schildkamp, W.; Jaski, Y. [Consortium for Advanced Radiation Sources, University of Chicago, 5640 S. Ellis Ave., Chicago, IL 60637 (United States)] [Consortium for Advanced Radiation Sources, University of Chicago, 5640 S. Ellis Ave., Chicago, IL 60637 (United States); Tonnessen, T.; Douglas, G. [Rocketdyne Albuquerque Operations, 2511 C. Broadbent Parkway, N.E., Albuquerque, NM 87107 (United States)] [Rocketdyne Albuquerque Operations, 2511 C. Broadbent Parkway, N.E., Albuquerque, NM 87107 (United States)

1996-09-01T23:59:59.000Z

106

Microsoft Word - S07757_2011 Mound IC Report  

Office of Legacy Management (LM)

Department of Energy Annual Assessment of the Effectiveness of Site-Wide Institutional Controls June 2011 Doc. No. S07757 Page C-1 Figure 1. T Building Rooms with Special ICs Annual Assessment of the Effectiveness of Site-Wide Institutional Controls U.S. Department of Energy Doc. No. S07757 June 2011 Page C-2 T Building Rooms with Special ICs In addition to the ICs for the entire site, T Building has the following additional IC restrictions as described in the Parcel 6, 7, and 8 Record of Decision. 1. Prohibit the removal of concrete floor material in specified rooms of T Building (Figure 1) to off-site locations without prior approval from EPA, OEPA, and ODH. 2. Prohibit the penetration of concrete floors in specified rooms of T Building (Figure 1)

107

Accelerating Predictive Simulation of IC Engines with High Performance...  

Broader source: Energy.gov (indexed) [DOE]

IC engines with high performance computing (ACE017) K. Dean Edwards (PI), C. Stuart Daw, Wael R. Elwasif, Charles E. A. Finney, Sreekanth Pannala, Miroslav K. Stoyanov, Robert M....

108

Opening on September 12, 2012, during the week of the Toronto International Film Festival, the Design Exchange in Downtown Toronto will host the exhibit titled "Considering the Quake| Seismic Design on the Edge," which will  

E-Print Network [OSTI]

Opening on September 12, 2012, during the week of the Toronto International Film Festival of emergency shelters and civil protection buildings such as schools and hospitals in Earthquake zones industries, but an invested public as well. Envisioned as a "science center" for design, the exhibit

Volesky, Bohumil

109

Microsoft Word - S08846_2012_Annual_IC report  

Office of Legacy Management (LM)

Department of Energy Annual Assessment of the Effectiveness of Site-Wide Institutional Controls Department of Energy Annual Assessment of the Effectiveness of Site-Wide Institutional Controls Doc. No. S08846 June 2012 Page C-1 T Building Rooms with Special ICs In addition to the ICs for the entire site, T Building has the following additional IC restrictions as described in the Parcel 6, 7, and 8 Record of Decision. 1. Prohibit the removal of concrete floor material in specified rooms of T Building (Figure 1) to off-site locations without prior approval from EPA, Ohio EPA, and ODH. 2. Prohibit the penetration of concrete floors in specified rooms of T Building (Figure 1) without prior approval from EPA, Ohio EPA, and ODH. On June 29, 2009, the Mound Core Team signed an agreement for the position paper which provided policy guidelines for limited activities in these rooms which should not result in

110

Microsoft Word - S08846_2012_Annual_IC report  

Office of Legacy Management (LM)

Listings and Photos of Monitoring Wells and Seeps Listings and Photos of Monitoring Wells and Seeps This page intentionally left blank U.S. Department of Energy Annual Assessment of the Effectiveness of Site-Wide Institutional Controls June 2012 Doc. No. S08846 Page D-1 D1. Parcel 6, 7, and 8 Remedy Wells and Seeps Table D-1and Figure D-1 show the Parcel 6, 7, and 8 groundwater monitoring wells and seep locations. Table D-2 shows photos of all wells and seeps. All of the Parcel 6, 7, and 8 wells were locked and in good condition. Because the groundwater monitoring is not an IC, the annual IC assessment only verifies the conditions of the wells and seeps; it does not determine the effectiveness of the MNA remedy. The remedy for the Parcels 6, 7, and 8 includes ICs for the land and MNA, which includes

111

IC 3418: STAR FORMATION IN A TURBULENT WAKE  

SciTech Connect (OSTI)

Galaxy Evolution Explorer observations of IC 3418, a low surface brightness galaxy in the Virgo Cluster, revealed a striking 17 kpc UV tail of bright knots and diffuse emission. H{alpha} imaging confirms that star formation is ongoing in the tail. IC 3418 was likely recently ram pressure stripped on its first pass through Virgo. We suggest that star formation is occurring in molecular clouds that formed in IC 3418's turbulent stripped wake. Tides and ram pressure stripping (RPS) of molecular clouds are both disfavored as tail formation mechanisms. The tail is similar to the few other observed star-forming tails, all of which likely formed during RPS. The tails' morphologies reflect the forces present during their formation and can be used to test for dynamical coupling between molecular and diffuse gas, thereby probing the origin of the star-forming molecular gas.

Hester, Janice A.; Neill, James D.; Wyder, Ted K.; Martin, D. Christopher [California Institute of Technology, Pasadena, CA 91125 (United States); Seibert, Mark; Madore, Barry F. [Observatories of the Carnegie Institute of Washington, Pasadena, CA 91101 (United States); Gil de Paz, Armando [Dpto. de Astrofisica, Universidad Computense de Madrid, Madrid 28040 (Spain); Schiminovich, David [Department of Astronomy, Columbia University, New York, NY 10027 (United States); Rich, R. Michael, E-mail: jhester@srl.caltech.ed [Department of Physics and Astronomy, Division of Astronomy and Astrophysics, University of California, Los Angeles, CA 90095 (United States)

2010-06-10T23:59:59.000Z

112

Chapter 5 - Security Models for SCADA, ICS, and Smart Grid  

Science Journals Connector (OSTI)

Abstract This chapter describes security models for different Smart Grid protocols, including SCADA and ICS protocols. Many protocols are explained, along with their security models, interoperability, and methods and models of organizing them within an integrated system. Security methodologies are compared in order to create a working model for Smart Grid systems.

Eric D. Knapp; Raj Samani

2013-01-01T23:59:59.000Z

113

Proton Ordering of Cubic Ice Ic: Spectroscopy and Computer Simulations  

E-Print Network [OSTI]

by producing rotational Bjerrum L-defects.1 Ambient-pressure hexagonal ice, ice Ih, shows the lowest produced from ice Ih using hydroxide doping, for example, by freezing a 0.1 M KOH solution. Because ice IhProton Ordering of Cubic Ice Ic: Spectroscopy and Computer Simulations Philipp Geiger, Christoph

Dellago, Christoph

114

Circumstellar interaction of the type Ia supernova 2002ic  

Science Journals Connector (OSTI)

......with arguments in favour of a high-energy SN Ia event in this case, raises...WD explosion with a high kinetic energy of ejecta. The SN 1.5 origin of...2002ic-like events requires an accurate energy audit, for which the direct detection......

N. N. Chugai; R. A. Chevalier; P. Lundqvist

2004-12-01T23:59:59.000Z

115

Incoherent internal tidal currents in the deep ocean  

Science Journals Connector (OSTI)

‘Eleven months’ current meter observations from the deep Bay of Biscay were examined for the residual (incoherent internal tidal; icIT) signal, left after harmonic analysis using eight tidal constituents (larg...

Hans van Haren

2004-02-01T23:59:59.000Z

116

ENHANCED IGNITION FOR I.C. ENGINES WITH PREMIXED CHARGE  

E-Print Network [OSTI]

Oper·atEngines- Flame Initiation orInternal Combustion Engines," SAE Paper 760764. Wyczalek, F.an Internal Combustion Engine,'' Combusti and Flame Vol. 31,

Dale, J.D.

2013-01-01T23:59:59.000Z

117

CHASING THE IDENTIFICATION OF ASCA GALACTIC OBJECTS (ChIcAGO): AN X-RAY SURVEY OF UNIDENTIFIED SOURCES IN THE GALACTIC PLANE. I. SOURCE SAMPLE AND INITIAL RESULTS  

E-Print Network [OSTI]

We present the Chasing the Identification of ASCA Galactic Objects (ChIcAGO) survey, which is designed to identify the unknown X-ray sources discovered during the ASCA Galactic Plane Survey (AGPS). Little is known about ...

Anderson, Gemma E.

118

DISCOVERY OF THE BROAD-LINED TYPE Ic SN 2013cq ASSOCIATED WITH THE VERY ENERGETIC GRB 130427A  

SciTech Connect (OSTI)

Long-duration gamma-ray bursts (GRBs) at z < 1 are found in most cases to be accompanied by bright, broad-lined Type Ic supernovae (SNe Ic-BL). The highest-energy GRBs are mostly located at higher redshifts, where the associated SNe are hard to detect observationally. Here, we present early and late observations of the optical counterpart of the very energetic GRB 130427A. Despite its moderate redshift, z = 0.3399 ± 0.0002, GRB 130427A is at the high end of the GRB energy distribution, with an isotropic-equivalent energy release of E{sub iso} ? 9.6 × 10{sup 53} erg, more than an order of magnitude more energetic than other GRBs with spectroscopically confirmed SNe. In our dense photometric monitoring, we detect excess flux in the host-subtracted r-band light curve, consistent with that expected from an emerging SN, ?0.2 mag fainter than the prototypical SN 1998bw. A spectrum obtained around the time of the SN peak (16.7 days after the GRB) reveals broad undulations typical of SNe Ic-BL, confirming the presence of an SN, designated SN 2013cq. The spectral shape and early peak time are similar to those of the high expansion velocity SN 2010bh associated with GRB 100316D. Our findings demonstrate that high-energy, long-duration GRBs, commonly detected at high redshift, can also be associated with SNe Ic-BL, pointing to a common progenitor mechanism.

Xu, D.; Krühler, T.; Hjorth, J.; Malesani, D.; Fynbo, J. P. U.; Watson, D. J.; Geier, S. [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, Juliane Maries Vej 30, DK-2100 København Ø (Denmark); De Ugarte Postigo, A.; Thöne, C. C.; Sánchez-Ramírez, R. [Instituto de Astrofísica de Andalucía, CSIC, Glorieta de la Astronomía s/n, E-18008 Granada (Spain); Leloudas, G. [The Oskar Klein Centre, Department of Physics, Stockholm University, AlbaNova, SE-10691 Stockholm (Sweden); Cano, Z.; Jakobsson, P. [Centre for Astrophysics and Cosmology, Science Institute, University of Iceland, Dunhagi 5, IS-107 Reykjavik (Iceland); Schulze, S. [Departamento de Astronomía y Astrofísica, Pontificia Universidad Católica de Chile, Casilla 306, Santiago 22 (Chile); Kaper, L. [Astronomical Institute Anton Pannekoek, University of Amsterdam, Science Park 904, NL-1098 XH Amsterdam (Netherlands); Sollerman, J. [The Oskar Klein Centre, Department of Astronomy, Stockholm University, AlbaNova, SE-10691 Stockholm (Sweden); Cabrera-Lavers, A. [Instituto de Astrofísica de Canarias, E-38205 La Laguna, Tenerife (Spain); Cao, C. [Department of Space Science and Physics, Shandong University at Weihai, Weihai, Shandong 264209 (China); Covino, S. [INAF/Brera Astronomical Observatory, via Bianchi 46, I-23807 Merate (Italy); Flores, H., E-mail: dong@dark-cosmology.dk [Laboratoire Galaxies Etoiles Physique et Instrumentation, Observatoire de Paris, 5 place Jules Janssen, F-92195 Meudon (France); and others

2013-10-20T23:59:59.000Z

119

EM International Strategic Plan 2010-2015  

Broader source: Energy.gov (indexed) [DOE]

InternatIonal Program StrategIc Plan 2010-2015 InternatIonal Program StrategIc Plan 2010-2015 Message from the Director Our International Program links the DOE Office of Environmental Management (EM) to the world's evolving environmental remediation and radioactive waste management practices. The EM International Program develops formal relationships with multilateral international organizations as well as organizations within individual nations that enable exchange of scientific and technical information and collabora- tive activities. Further, the International Program fosters communica- tion and discovery globally of emergent technologies. Participation in these activities benefits EM through the acquisition and pooling of information, particularly related to complex issues, which have the potential of leading to transformational solutions to

120

Design  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Design Design of a Multithreaded Barnes-Hut Algorithm for Multicore Clusters Technical Report Junchao Zhang and Babak Behzad Department of Computer Science, University of Illinois at Urbana-Champaign {jczhang, bbehza2}@illinois.edu Marc Snir Department of Computer Science, University of Illinois at Urbana-Champaign and MCS Division, Argonne National Laboratory snir@anl.gov Abstract We describe in this paper an implementation of the Barnes-Hut al- gorithm on multicore clusters. Based on a partitioned global ad- dress space (PGAS) library, the design integrates intranode mul- tithreading and internode one-sided communication, exemplifying a PGAS + X programming style. Within a node, the computation is decomposed into tasks (subtasks), and multitasking is used to hide network latency. We study the tradeoffs between locality in private caches and locality in shared caches

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

P'l>IC_f F2.  

Broader source: Energy.gov (indexed) [DOE]

P'l>IC_f P'l>IC_f F2. p-, . (I!; u.s. DEPARTMENT OF ENERGY EERE PROJECT M ANAG EM EN T CEN T ER NEPA DETERMINATION RECIPIENT:Ohio Department of Development PROJECT TITLE: SEP ARRA * Wooster Renewable Energy Page I of3 ® STATE: OH Funding Opportunity Announcement Number Procurement I.nstrument Number NEPA Control Number elD Number EEQ000165 GFO-OOO0165-023 GOO Based on my review oflbe information concerning the proposed action, as NEPA Compliance Officer (authorlud under DOE Ordcr45I.1A), I have made tbe following determination: ex, EA, EIS APPENDIX AND NUMBER: Description: 85.1 Actions to conserve energy, demonstrate potential energy conservation, and promote energy.efficiency that do not increase the indoor concentrations of potentially harmful substances. These actions may inYOlve financial and technical

122

Microsoft Word - S07757_2011 Mound IC Report  

Office of Legacy Management (LM)

IC Assessment Checklist IC Assessment Checklist This page intentionally left blank CHECKLIST WORKSHEET - COMBINED - ALL PARCELS Review of Effectiveness of Institutional Controls U.S. Department of Energy Annual Assessment of the Effectiveness of Site-Wide Institutional Controls June 2011 Doc. No. S07757 Page A-1 Scope: Entire Mound Site Preliminary inspections performed on: April 5 and 7, 2011 Physical Inspection Walk around on: April 12, 2011 Review led by: Art Kleinrath, DOE LM Phone #: 937-227-2237 Participants in Physical Inspection Walk Around on April 12, 2011: See attached sign-in sheet. Summary of property improvements since the previous Review. For example, have buildings been demolished or erected? Has surface water flow been modified? Has landscaping been

123

Applications of the LM392 Comparator Op Amp IC  

E-Print Network [OSTI]

Applications of the LM392 Comparator Op Amp IC The LM339 quad comparator and the LM324 op amp operation and ease of use has contributed to the wide range of applications for these devices. The LM392 FIGURE 1. 00749302 Q1, Q2, Q3 = 2N2369 Q4 = 2N2907 C1, A1 = LM392 amplifier-comparator dual *1% metal

Lanterman, Aaron

124

DDO photometry of the open cluster IC 4756  

SciTech Connect (OSTI)

DDO photometry is presented for 13 red stars in the field of IC 4756, ten of which are classified as proper-motion cluster giants. Of these ten, one is found to be a dwarf, in agreement with the uvby photometry of Schmidt (1978). The strength of the delta CN cyanogen excess parameter for five of the giants indicates that the cluster has essentially solar abundance. 12 references.

Smith, G.H.

1983-05-01T23:59:59.000Z

125

Comparison of Hazard Analysisp y Requirements of I&C  

E-Print Network [OSTI]

requirements in nuclear industry IAEA IEC f k NRC IEEE f k­ IAEA-IEC framework, NRC-IEEE framework · Challenges Cabinet T/G & Protection BOP Sys Component Control Cabinet AUX. SYS. HVAC NSSS Component Control Cabinet of KNICS &C ­ IEEE 1228 · Korea Nuclear I&C System(KNICS) · 2001 2004: Develop a ­ IEEE 1228, ­ SRP BTP14

126

Preliminary Study on Reliability Analysis of Safety I&C System in NPP  

Science Journals Connector (OSTI)

Digital instrumentation and control (I&C) systems, such as digital Reactor Protection System (RPS), are being employed ... upgraded Nuclear Power Plants (NPPs). The reliability analysis of digital I&C system turn...

Chao Guo; Duo Li; Huasheng Xiong

2012-01-01T23:59:59.000Z

127

Stress-induced Effects Caused by 3D IC TSV Packaging in Advanced Semiconductor Device Performance  

SciTech Connect (OSTI)

Potential challenges with managing mechanical stress and the consequent effects on device performance for advanced 3D through-silicon-via (TSV) based technologies are outlined. The paper addresses the growing need in a simulation-based design verification flow capable to analyze a design of 3D IC stacks and to determine across-die out-of-spec variations in device electrical characteristics caused by the layout and through-silicon-via (TSV)/package-induced mechanical stress. The limited characterization/measurement capabilities for 3D IC stacks and a strict ''good die'' requirement make this type of analysis critical for the achievement of an acceptable level of functional and parametric yield and reliability. The paper focuses on the development of a design-for-manufacturability (DFM) type of methodology for managing mechanical stresses during a sequence of designs of 3D TSV-based dies, stacks and packages. A set of physics-based compact models for a multi-scale simulation to assess the mechanical stress across the device layers in silicon chips stacked and packaged with the 3D TSV technology is proposed. A calibration technique based on fitting to measured stress components and electrical characteristics of the test-chip devices is presented. A strategy for generation of a simulation feeding data and respective materials characterization approach are proposed, with the goal to generate a database for multi-scale material parameters of wafer-level and package-level structures. For model validation, high-resolution strain measurements in Si channels of the test-chip devices are needed. At the nanoscale, the transmission electron microscopy (TEM) is the only technique available for sub-10 nm strain measurements so far.

Sukharev, V.; Kteyan, A.; Choy, J.-H.; Hovsepyan, H.; Markosian, A. [Mentor Graphics Corporation, 46871 Bayside Parkway, Fremont, CA 94538 (United States); Zschech, E.; Huebner, R. [Fraunhofer Institute for Non-Destructive Testing, Maria-Reiche-Strasse 2, 01109 Dresden (Germany)

2011-11-10T23:59:59.000Z

128

INTERNATIONAL COURSEGUIDE  

E-Print Network [OSTI]

, Applied Science, Arts and Design, Information Sciences and Engineering. INTERNATIONAL COURSE GUIDE01 #00212K, University of Canberra College #01893E. Information in this guide was correct at time in a competitive global market. This can involve work integrated learning, and in many courses students have

Canberra, University of

129

Design, Construction, and Validation of an In-Cylinder Pressure Recording System for Internal Combustion Engine Analysis  

E-Print Network [OSTI]

agreement with published works and resulted in correlations for fuel properties that were not discussed in literature. In chapter three, the design, construction, and validation of an engine cylinder pressure recording system are covered. In particular...

Mangus, Michael D.

2012-05-31T23:59:59.000Z

130

Internal Audit Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Internal Audit Services Internal Audit Services Berkeley Lab Internal Audit Services Internal Audit Services Berkeley Lab Contacts Organizational Chart IAS Search Staff Only Lab Search Phone Book A-Z Index Privacy and Security Notice "Internal Auditing is an independent, objective assurance and consulting activity designed to add value and improve an organization's operations. It helps an organization accomplish its objectives by bringing a systematic, disciplined approach to evaluate and improve the effectiveness of risk management, control and governance processes." The Institute of Internal Auditors Standards for the Professional Practice of Internal Auditing About IAS | Audit Committee | Audit Planning | Ethics & Investigations | External Audit Coordination Advisory Services | Other Relevant Audit Links | Contacts | Organizational

131

1 Copyright 2008 by ASME Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and  

E-Print Network [OSTI]

This paper describes a multinational program aimed at teaching processes and methods for sustainable product, New York, U.S.A DETC2008-49388 TEACHING MULTINATIONAL, MULTIDISCIPLINARY SUSTAINABLE PRODUCT development using multidisciplinary project-based teams. The foundation course teaches processes for designing

Agogino, Alice M.

132

Design and fabrication of a 1.2 meter long internally cooled silicon x-ray mirror for APS  

SciTech Connect (OSTI)

This paper describes the specifications, design, and fabrication of a 1.2 meter long ultra high vacuum (UHV) silicon mirror for use as the first optical element on an x-ray beamline at APS. The mirror, which is 1,200 mm x 90 mm x 120 mm in size, intercepts the incident x-ray beam at 0.15{degree}. The thermal power incident on the mirror is 1.2 kW with a peak heat flux of 0.38 W/mm{sup 2}. The heat is removed by flowing water through a set of channels configured in the face plate of the mirror. Various aspects of this mirror, including its purpose, utility, expected thermal and structural performance, cooling design, UHV provision, support and mounting, surface figure and finish, bonding of the cooling conduits, and other manufacturing steps are discussed.

Tonnessen, T.W. [Rocketdyne Albuquerque Operations, NM (United States); Khounsary, A.M.; Yun, W.B.; Shu, D. [Argonne National Lab., IL (United States). Advanced Photon Source

1996-12-31T23:59:59.000Z

133

Physics design of a 100 keV acceleration grid system for the diagnostic neutral beam for international tokamak experimental reactor  

SciTech Connect (OSTI)

This paper describes the physics design of a 100 keV, 60 A H{sup -} accelerator for the diagnostic neutral beam (DNB) for international tokamak experimental reactor (ITER). The accelerator is a three grid system comprising of 1280 apertures, grouped in 16 groups with 80 apertures per beam group. Several computer codes have been used to optimize the design which follows the same philosophy as the ITER Design Description Document (DDD) 5.3 and the 1 MeV heating and current drive beam line [R. Hemsworth, H. Decamps, J. Graceffa, B. Schunke, M. Tanaka, M. Dremel, A. Tanga, H. P. L. De Esch, F. Geli, J. Milnes, T. Inoue, D. Marcuzzi, P. Sonato, and P. Zaccaria, Nucl. Fusion 49, 045006 (2009)]. The aperture shapes, intergrid distances, and the extractor voltage have been optimized to minimize the beamlet divergence. To suppress the acceleration of coextracted electrons, permanent magnets have been incorporated in the extraction grid, downstream of the cooling water channels. The electron power loads on the extractor and the grounded grids have been calculated assuming 1 coextracted electron per ion. The beamlet divergence is calculated to be 4 mrad. At present the design for the filter field of the RF based ion sources for ITER is not fixed, therefore a few configurations of the same have been considered. Their effect on the transmission of the electrons and beams through the accelerator has been studied. The OPERA-3D code has been used to estimate the aperture offset steering constant of the grounded grid and the extraction grid, the space charge interaction between the beamlets and the kerb design required to compensate for this interaction. All beamlets in the DNB must be focused to a single point in the duct, 20.665 m from the grounded grid, and the required geometrical aimings and aperture offsets have been calculated.

Singh, M. J. [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428 (India); De Esch, H. P. L. [CEA-Cadarache, IRFM, F-13108 Saint-Paul-lez-Durance (France)

2010-01-15T23:59:59.000Z

134

Developing an approach utilizing local deterministic analysis to predict the cycle friction of the piston ring-pack in internal combustion engines  

E-Print Network [OSTI]

Nowadays, a rapid growth of internal combustion (IC) engines is considered to be a major contributor to energy crisis. About 20% of the mechanical loss in internal combustion engines directly goes to the friction loss ...

Liu, Yang, S.M. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

135

Methodology for Residential Building Energy Simulations Implemented in the International Code Compliance Calculator (IC3)  

E-Print Network [OSTI]

. Typical Meteorological Year 2 (TMY2) data files are used in the simulations. Figure 2 shows the available weather stations for Texas, which includes 17 NOAA 2 eGRID, is the EPA?s Emissions... for the TCEQ for use with Senate Bill 5. 3 NOx emissions from natural gas used on-site are calculated with data from the EPA?s AP-42 database stations from which the TMY2 data have been derived, 15 NREL solar sites 4 and 10 TCEQ solar sites. Currently...

Liu, Z.; Mukhopadhyay, J.; Malhotra, M.; Haberl, J.; Gilman, D.; Montgomery, C.; McKelvey, K.; Culp, C.; Yazdani, B.

136

C32, A Young Star Cluster in IC 1613  

E-Print Network [OSTI]

The Local Group irregular galaxy IC 1613 has remained an enigma for many years because of its apparent lack of star clusters. We report the successful search for clusters among several of the candidate objects identified many years ago on photographic plates. We have used a single HST WFPC2 pointing and a series of images obtained with the WIYN telescope under exceptional seeing conditions, examining a total of 23 of the previously published candidates. All but six of these objects were found to be either asterisms or background galaxies. Five of the six remaining candidates possibly are small, sparse clusters and the sixth, C32, is an obvious cluster. It is a compact, young object, with an age of less than 10 million years and a total absolute magnitude of M_V = -5.78+/-0.16 within a radius of 13 pc.

Ted K. Wyder; Paul W. Hodge; Andrew Cole

2000-02-23T23:59:59.000Z

137

OFFICE of MATERIALS & LOGISTICS MANAGEMENT CAPITAL ASSET INVENTORY CERTIFICATE --IC-10  

E-Print Network [OSTI]

OFFICE of MATERIALS & LOGISTICS MANAGEMENT CAPITAL ASSET INVENTORY CERTIFICATE -- IC-10 DATE: From: Jack Ferraro University Director Office of Materials & Logistics Management (MLM) LB058, MC 2012

Oliver, Douglas L.

138

International Journal of Systems Science, 2000, volume 31, number 4, pages 519 527 Multi machine power system excitation control design via theories  

E-Print Network [OSTI]

voltage direct current (HVDC) power control design and static voltage condensor (SVC) control design (Lu

Qu, Zhihua

139

Design, performance, and grounding aspects of the International Thermonuclear Experimental Reactor ion cyclotron range of frequencies antenna  

SciTech Connect (OSTI)

ITER's Ion Cyclotron Range of Frequencies (ICRF) system [Lamalle et al., Fusion Eng. Des. 88, 517–520 (2013)] comprises two antenna launchers designed by CYCLE (a consortium of European associations listed in the author affiliations above) on behalf of ITER Organisation (IO), each inserted as a Port Plug (PP) into one of ITER's Vacuum Vessel (VV) ports. Each launcher is an array of 4 toroidal by 6 poloidal RF current straps specified to couple up to 20?MW in total to the plasma in the frequency range of 40 to 55 MHz but limited to a maximum system voltage of 45?kV and limits on RF electric fields depending on their location and direction with respect to, respectively, the torus vacuum and the toroidal magnetic field. A crucial aspect of coupling ICRF power to plasmas is the knowledge of the plasma density profiles in the Scrape-Off Layer (SOL) and the location of the RF current straps with respect to the SOL. The launcher layout and details were optimized and its performance estimated for a worst case SOL provided by the IO. The paper summarizes the estimated performance obtained within the operational parameter space specified by IO. Aspects of the RF grounding of the whole antenna PP to the VV port and the effect of the voids between the PP and the Blanket Shielding Modules (BSM) surrounding the antenna front are discussed. These blanket modules, whose dimensions are of the order of the ICRF wavelengths, together with the clearance gaps between them will constitute a corrugated structure which will interact with the electromagnetic waves launched by ICRF antennas. The conditions in which the grooves constituted by the clearance gaps between the blanket modules can become resonant are studied. Simple analytical models and numerical simulations show that mushroom type structures (with larger gaps at the back than at the front) can bring down the resonance frequencies, which could lead to large voltages in the gaps between the blanket modules and perturb the RF properties of the antenna if they are in the ICRF operating range. The effect on the wave propagation along the wall structure, which is acting as a spatially periodic (toroidally and poloidally) corrugated structure, and hence constitutes a slow wave structure modifying the wall boundary condition, is examined.

Durodié, F., E-mail: frederic.durodie@rma.ac.be; Dumortier, P.; Vrancken, M.; Messiaen, A.; Huygen, S.; Louche, F.; Van Schoor, M.; Vervier, M. [LPP-ERM/KMS, Association EURATOM-Belgian State, Brussels (Belgium); Bamber, R.; Hancock, D.; Lockley, D.; Nightingale, M. P. S.; Shannon, M.; Tigwell, P.; Wilson, D. [EURATOM/CCFE Assoc., Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Maggiora, R.; Milanesio, D. [Associazione EURATOM-ENEA, Politechnico di Torino (Italy); Winkler, K. [IPP-MPI, EURATOM-Assoziation, Garching (Germany)

2014-06-15T23:59:59.000Z

140

International Student Guide www.swansea.ac.uk/international  

E-Print Network [OSTI]

Nanotechnology l MSc Petroleum Engineering (subject to validation) l Product Design l Sports Science Environment Business l International Trade l International Commercial l Law and Globalisation Medicine Biochemistry l million Institute of Life Science, Multidisciplinary Nanotechnology Centre, Institute of Environmental

Martin, Ralph R.

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

XPS: A multi-channel preamplifier shaper IC for X-ray spectroscopy  

SciTech Connect (OSTI)

An integrated circuit featuring 48 channels of charge-sensitive preamplifiers followed by variable-gain pulse shaping amplifiers is being developed as part of an x-ray spectrometer with a highly segmented detector to handle high fluxes in synchrotron experiments. Such detector systems can provide excellent energy resolution combined with one-dimensional spatial information. The IC combines many basic spectroscopy amplifier functions with a low-noise preamplifier section to produce a unique circuit capable of driving conventional ADC modules directly. An important feature of the design is the novel CR-RC{sup 2} pulse shaper. In this section, high-linearity transconductor circuits are required in order to provide a broad range of continuously variable peaking times while still maintaining the linearity and noise performance necessary for x-ray spectroscopy. Reported here are first measurements made on the performance of a 16-channel prototype integrated circuit. At present, the preamplifier-shaper circuit achieves an equivalent input noise of 26 electrons rms at 2 {micro}s peaking time with a 0.2 pF external capacitor, which is similar to the capacitance of a single detector element. The design was fabricated in standard 1.2 {micro}m CMOS technology.

Krieger, B.; Kipnis, I.; Ludewigt, B.A.

1997-11-01T23:59:59.000Z

142

Attachment method for stacked integrated circuit (IC) chips  

DOE Patents [OSTI]

An attachment method for stacked integrated circuit (IC) chips. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM.

Bernhardt, Anthony F. (Berkeley, CA); Malba, Vincent (Livermore, CA)

1999-01-01T23:59:59.000Z

143

Attachment method for stacked integrated circuit (IC) chips  

DOE Patents [OSTI]

An attachment method for stacked integrated circuit (IC) chips is disclosed. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM. 12 figs.

Bernhardt, A.F.; Malba, V.

1999-08-03T23:59:59.000Z

144

ATLAS Binary Readout IC (ABC) Specification V5.01 21Jul1999 Project Specification  

E-Print Network [OSTI]

ATLAS Binary Readout IC (ABC) Specification V5.01 21­Jul­1999 Project Specification Project Name: ATLAS ATLAS Binary Readout IC (ABC) Specification V5.01 21­Jul­1999 Table of Contents 1. SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.1. ATLAS BINARY FRONT END READOUT ARCHITECTURE

California at Santa Cruz, University of

145

ATLAS Binary Readout IC (ABC) Specification V5.01 21-Jul-1999 Project Specification  

E-Print Network [OSTI]

Page 1 ATLAS Binary Readout IC (ABC) Specification V5.01 21-Jul-1999 Project Specification Project Name: ATLAS Binary Chip (ABC) Version: 5.01 Revision History Revision Change Description, Pages Revised and formatting. M. French 21-Jul-99 #12;Page 2 ATLAS Binary Readout IC (ABC) Specification V5.01 21-Jul-1999

California at Santa Cruz, University of

146

Design Approaches to Field-Programmable Analog Integrated Circuits  

Science Journals Connector (OSTI)

The drive towards shorter design cycles for analog integrated circuits has given impetus to several developments in the area of Field-Programmable Analog Arrays (FPAAs). Various approaches have been taken in implementing structural and parametric programmability ... Keywords: FPAA, FPGA, FPMA, IC, analog CAD, field-programmable, mixed-signal IC, programmable analog

Dean R. D’Mello; P. Glenn Gulak

1998-09-01T23:59:59.000Z

147

X-ray Emission from Megamaser Galaxy IC 2560  

SciTech Connect (OSTI)

Observation of the H{sub 2}O megamaser galaxy IC 2560 with the Chandra Observatory reveals a complex spectrum composed of soft X-ray emission due to multi-temperature thermal plasma, and a hard continuum with strong emission lines. The continuum is most likely a Compton reflection (reprocessing) of primary emission that is completely absorbed at least up to 7 keV. The lines can be identified with fluorescence from Si, S and Fe in the lowest ionization stages. The equivalent widths of the Si and S lines are broadly compatible with those anticipated for reprocessing by optically thick cold plasma of Solar abundances, while the large equivalent width of the Fe line requires some overabundance of iron. A contribution to the line from a transmitted component cannot be ruled out, but the limits on the strength of the Compton shoulder make it less likely. From the bolometric luminosity of the nuclear region, we infer that the source radiates at 1-10% of its Eddington luminosity, for an adopted central mass of 3 x 10{sup 6} M{sub {circle_dot}}. The overall spectrum is consistent with the hypotheses that the central engines powering the detected megamsers in accretion disks are obscured from direct view by the associated accretion disk material itself, and that there is a correlation between the occurrence of megamaser emission and Compton-thick absorption columns. For the 11 known galaxies with both column density measurements and maser emission believed to arise from accretion disks, eight AGN are Compton thick.

Madejski, Greg; /SLAC /KIPAC, Menlo Park; Done, Chris; /Durham U.; Zycki, Piotr; /Warsaw, Copernicus Astron. Ctr.; Greenhill, Lincoln; /KIPAC, Menlo Park

2005-09-12T23:59:59.000Z

148

Proceedings of ICAD 05-Eleventh Meeting of the International Conference on Auditory Display, Limerick, Ireland, July 6-9, 2005 MOBILE AUDIO DESIGNS MONKEY: AN AUDIO AUGMENTED  

E-Print Network [OSTI]

, Limerick, Ireland, July 6-9, 2005 ICAD05-1 MOBILE AUDIO DESIGNS MONKEY: AN AUDIO AUGMENTED REALITY DESIGNER@cc.gatech.edu ABSTRACT Audio Augmented Reality (AR) design is currently a very difficult task. To develop audio for an AR of the audio. To support the design process, an audio AR designers' tool called Mobile Audio Designs (MAD

149

admission guide International  

E-Print Network [OSTI]

2015/ 2016 admission guide International First-Year Students #12;2 3 WORLDWIDE RECOGNITION (2008 and Digital Media Critical Studies* Integrated Critical Practice* Production* German Studies Global Economics Networks Computer Science Computer Science: Computer Game Design Electrical Engineering Communications

California at Santa Cruz, University of

150

INTERNATIONAL PACIFIC RESEARCH CENTER  

E-Print Network [OSTI]

INTERNATIONAL PACIFIC RESEARCH CENTER APRIL 2004­MARCH 2005 REPORT SCHOOL OF OCEAN AND EARTH RESEARCH HIGHLIGHTS Indo-Pacific Ocean Climate Pacific Research Center Design by: Susan Yamamoto Printed by: Hagadone Printing Company Photo: Waikiki

Wang, Yuqing

151

Modeling of contact between liner finish and piston ring in internal combustion engines based on 3D measured surface  

E-Print Network [OSTI]

When decreasing of fossil fuel supplies and air pollution are two major society problems in the 21st century, rapid growth of internal combustion (IC) engines serves as a main producer of these two problems. In order to ...

Zhao, Qing, S.M. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

152

Fast high-order variation-aware IC interconnect analysis  

E-Print Network [OSTI]

Interconnects constitute a dominant source of circuit delay for modern chip designs. The variations of critical dimensions in modern VLSI technologies lead to variability in interconnect performance that must be fully accounted for in timing...

Ye, Xiaoji

2009-05-15T23:59:59.000Z

153

Proceedings of the Third International Round-Table Conference on Computational Models of Creative Design, Heron Island, Queensland, Australia, December 3-7, 1995.  

E-Print Network [OSTI]

from an emerging new direction in engineering design research, in particular, creative design serve as a foundation for developing a computational theory of engineering design and design creativity of engineering design creativity. When the first paradigm was dominant, the major focus in engineering

Michalski, Ryszard S.

154

An assessment of the core degradation frequency in a typical large LMFBR design for internal accident initiators-a comparison with PWR predictions  

SciTech Connect (OSTI)

A comparative assessment of the core degradation frequency due to internal accident initiators between a typical large liquid-metal fast breeder reactor (LMFBR) design and pressurized water reactors (PWRs) has been performed. For the PWR system, existing analyses have been utilized. For the reference LMFBR, an extensive analysis has been performed for two accident initiators, i.e., loss of off-site power and loss of main feedwater. Based on this analysis an estimate of about1 X 10/sup -6//reactor X yr has been obtained for the core degradation frequency of the reference LMFBR. This estimate is significantly smaller than the PWR core degradation frequency ( about 6 X 10/sup -5//yr). A sensitivity analysis shows that the parameters having the largest impact on the unavailability of decay heat removal are (a) for the ''loss of off-site power'' initiator: human error and failure to restore off-site power, and (b) for the ''loss of main feedwater'' initiator: the leakage rates of the passive decay heat removal system and the adoption of the policy to repair the Na-NaK heat exchanger only during normal shutdowns. The results indicate that the LMFBR system has the potential of higher resistance than the PWR system to the accident initiators considered. The lower core degradation frequency estimated for the LMFBR system is due to the presence of two redundant and diverse reactor shutdown systems, with a self-actuated feature included in one of them, the incorporation of a passive decay heat removal system, and the significantly lower sensitivity of the reference LMFBR to primary system pipe breaks.

Tzanos, C.P.; Adamantiades, A.G.; Hanan, N.A.

1983-12-01T23:59:59.000Z

155

I.C. 47-1605 - Geothermal Resources - Leases--Rental and Royalty...  

Open Energy Info (EERE)

1605 - Geothermal Resources - Leases--Rental and Royalty Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: I.C. 47-1605 -...

156

I.C. 39-3602 - Water Quality--Definitions | Open Energy Information  

Open Energy Info (EERE)

2 - Water Quality--Definitions Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: I.C. 39-3602 - Water Quality--DefinitionsLegal...

157

I.C. 39-101 - Idaho Environmental Protection and Health Act ...  

Open Energy Info (EERE)

101 - Idaho Environmental Protection and Health Act Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: I.C. 39-101 - Idaho...

158

I.C. 62-6 - Procedure Before Commission and in Courts | Open...  

Open Energy Info (EERE)

Procedure Before Commission and in Courts Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: I.C. 62-6 - Procedure Before Commission...

159

Counterfeit IC Detection and Challenges Ahead Ujjwal Guin, University of Connecticut  

E-Print Network [OSTI]

Counterfeit IC Detection and Challenges Ahead Ujjwal Guin, University of Connecticut Mohammad Tehranipoor, University of Connecticut Dan DiMase, Chairman - SAE G-19A, Test Laboratory Standards Development

Tehranipoor, Mohammad

160

Revisiting the Image of "Bushmen Tea" Jean-Lo'ic Le Quellec,  

E-Print Network [OSTI]

Revisiting the Image of "Bushmen Tea" Jean-Lo'ic Le Quellec, Research Director, CNRS (French appalling. Rooibos container. The Achterfontein brand was created in 2008. The logo adapted from a bushman

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Microsoft Word - S04030_Ann IC Assmt Rpt final - for printing...  

Office of Legacy Management (LM)

with DOE-EM to dispose of their air monitoring stations on site. U.S. Department of Energy Annual Assessment of the Effectiveness of Site-Wide ICs June 2008 Doc. No. S0403000...

162

I.C. 61-17 - Siting of Certain Electrical Transmission Facilities...  

Open Energy Info (EERE)

7 - Siting of Certain Electrical Transmission Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: I.C. 61-17 - Siting of...

163

I.C. 39-44 - Idaho Hazardous Waste Management Act | Open Energy...  

Open Energy Info (EERE)

- Idaho Hazardous Waste Management Act Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: I.C. 39-44 - Idaho Hazardous Waste...

164

Analysis of Interlayer Shorts in a 0.5 {micro}m CMOS IC Technology  

SciTech Connect (OSTI)

Sandia is manufacturing CMOS ICs with 0.5 {micro}m LOCOS and shallow trench isolation (STI) technologies and is developing a 0.35 {micro}m SOI technology. A program based on burn-in and life tests is being used to qualify the 0.5 {micro}m technologies for delivery of high reliability ICs to customers for military and space applications. Representative ICs from baseline wafer lots are assembled using a high reliability process with multilayer hermetic, ceramic packages. These ICs are electrically tested before, during, and after burn-in and subsequent 1000 hour dynamic and static life tests. Two types of ICS are being used for this qualification, a 256K bit SRAM and a Microcontroller Core (MCC). Over 600 ICs have successfully completed these qualification tests, resulting in a failure rate estimate of less than 4 FITS for satellite applications. Recently, a group of SRAMS from a development wafer lot incorporating nonqualified processes of the 0.5 {micro}m LOCOS technology had an unusually high number of failures during the initial electrical test after packaging. The investigation of these failures is described.

Cole, E.I.; Henderson, C.L.; Soden, J.M.

1999-03-12T23:59:59.000Z

165

International Rectifier Corporation | Open Energy Information  

Open Energy Info (EERE)

Rectifier Corporation Rectifier Corporation Jump to: navigation, search Name International Rectifier Corporation Place El Segundo, California Zip 90245 Product Manufacturer of analog and mixed signal ICs, advanced circuit devices, integrated power systems and components that enable high performance of end products in home appliances, industrial motor-driven equipment, autos, and information technology. References International Rectifier Corporation[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. International Rectifier Corporation is a company located in El Segundo, California . References ↑ "International Rectifier Corporation" Retrieved from "http://en.openei.org/w/index.php?title=International_Rectifier_Corporation&oldid=347054"

166

2010 IEEE International Semiconductor Laser Conference, Kyoto, Japan Measurement of internal quantum efficiency and temperature dependence of gain  

E-Print Network [OSTI]

quantum efficiency and temperature dependence of gain and loss in interband cascade lasers near room, University of Maryland, College Park, MD 20742 Recently, type-II interband cascade (IC) lasers operating and internal quantum efficiency in these lasers. In contrast to previous reports [2-3], we demonstrate

Dagenais, Mario

167

E-Print Network 3.0 - acm international conference Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ON COMPUTERAIDED DESIGN ICCV IEEE INTERNATIONAL CONFERENCE... OF KR & REASONING MICRO IEEEACM MICRO MOBILEHCI INTERNATIONAL CONFERENCE ON HUMANCOMPUTER INTERACTION......

168

A parameterized functional cell design methodology for analog integrated circuits  

E-Print Network [OSTI]

CAD system to analog IC design GPFC simulation macromodels used for continuous-time equivalent SPICE simulations Example of the use of the continuous-time equivalent simulation macromodels GPFC simulation macromodels used for transmission line... CAD system to analog IC design GPFC simulation macromodels used for continuous-time equivalent SPICE simulations Example of the use of the continuous-time equivalent simulation macromodels GPFC simulation macromodels used for transmission line...

Bily, Stephen Frank

2012-06-07T23:59:59.000Z

169

Conceptual design for the NSTX central instrumentation and control system  

Science Journals Connector (OSTI)

The design and construction phase for the national spherical torus experiment (NSTX) is under way at the Princeton Plasma Physics Laboratory (PPPL). Operation is scheduled to begin on April 30, 1999. This paper describes the conceptual design for the NSTX central instrumentation and control (I&C) system. Major elements of the central I&C system include the process control system, plasma control system, network system, data acquisition system, and synchronization system to support the NSTX experimental device.

D Bashore; G Oliaro; P Roney; P Sichta; K Tindall

1999-01-01T23:59:59.000Z

170

International Journal of Information Systems in the Service Sector, 1(3), May, 2009. Service Science, Management, Engineering, and Design (SSMED)  

E-Print Network [OSTI]

. Service Science, Management, Engineering, and Design (SSMED), or service science for short, is an emerging a new and unique service science. Keywords: Service Science Management Engineering and Design, SSMED of Service Science, Management, Engineering, and Design (SSMED) or service science, for short, is outlined

Su, Xiao

171

DESIGN METHODS 1177 INTERNATIONAL DESIGN CONFERENCE -DESIGN 2012  

E-Print Network [OSTI]

. Awareness on environmental performances of packaging-technology is a key issue for microelectronic industry-free solders paste, [Ekvael 2005] contributed to demonstrate hal-00737163,version1-1Oct2012 Author manuscript

Paris-Sud XI, Université de

172

Properties of Protostars in the Elephant Trunk in the Globule IC 1396A  

Science Journals Connector (OSTI)

Extremely red objects, identified in the early Spitzer Space Telescope observations of the bright-rimmed globule IC 1396A and photometrically classified as Class I protostars and Class II T Tauri stars based on their mid-infrared (mid-IR) colors, were spectroscopically observed at 5.5-38 ?m (Spitzer Infrared Spectrograph), at the 22 GHz water maser frequency (National Radio Astronomy Observatory Green Bank Telescope), and in the optical (Palomar Hale 5 m) to confirm their nature and further elucidate their properties. The sources photometrically identified as Class I, including IC 1396A:?, ?, ?, , and ?, are confirmed as objects dominated by accretion luminosity from dense envelopes, with accretion rates 1-10 ? 10–6 M ? yr–1 and present stellar masses 0.1-2 M ?. The Class I sources have extremely red continua, still rising at 38 ?m, with a deep silicate absorption at 9-11 ?m, weaker silicate absorption around 18 ?m, and weak ice features including CO2 at 15.2 ?m and H2O at 6 ?m. The ice/silicate absorption ratio in the envelope is exceptionally low for the IC 1396A protostars, compared to those in nearby star-forming regions, suggesting that the envelope chemistry is altered by the radiation field or globule pressure. Only one 22 GHz water maser was detected in IC 1396A; it is coincident with a faint mid-IR source, offset from near the luminous Class I protostar IC 1396A:?. The maser source, IC 1396A:? b , has luminosity less than 0.1 L ?, the first H2O maser from such a low-luminosity object. Two near-infrared (NIR) H2 knots on opposite sides of IC 1396A:? reveal a jet, with an axis clearly distinct from the H2O maser of IC 1396A:? b . The objects photometrically classified as Class II, including IC 1396A:?, ?, Two Micron All Sky Survey (2MASS)J 21364964+5722270, 2MASSJ 21362507+5727502, LkH? 349c, Tr 37 11-2146, and Tr 37 11-2037, are confirmed as stars with warm, luminous disks, with a silicate emission feature at 9-11 ?m, and bright H? emission; therefore, they are young, disk-bearing, classical T Tauri stars. The disk properties change significantly with source luminosity: low-mass (G-K) stars have prominent 9-11 emission features due to amorphous silicates while higher-mass (A-F) stars have weaker features requiring abundant crystalline silicates. A mineralogical model that fits the wide- and low-amplitude silicate feature of IC 1396A:? requires small grains of crystalline olivine (11.3 ?m peak) and another material to to explain its 9.1 ?m peak; reasonable fits are obtained with a phyllosilicate, quartz, or relatively large (greater than 10 ?m) amorphous olivine grains. The distribution of Class I sources is concentrated within the molecular globule, while the Class II sources are more widely scattered. Combined with the spectral results, this suggests two phases of star formation, the first (4 Myr ago) leading to the widespread Class II sources and the central O star of IC 1396 and the second (less than 1 Myr ago) occurring within the globule. The recent phase was likely triggered by the wind and radiation of the central O star of the IC 1396 H II region.

William T. Reach; Dohy Faied; Jeonghee Rho; Adwin Boogert; Achim Tappe; Thomas H. Jarrett; Patrick Morris; Laurent Cambrésy; Francesco Palla; Riccardo Valdettaro

2009-01-01T23:59:59.000Z

173

A custom-designed limited-angle actuator for an electromechanical engine valve drive Part II: Fabrication and evaluation  

E-Print Network [OSTI]

Research has shown that variable valve timing (VVT) can improve significantly the performance of internal combustion (IC) engines, including higher fuel efficiencies, lower emissions, and larger torque outputs at each point ...

Kassakian, John G.

174

Internal Tides  

Science Journals Connector (OSTI)

Abstract Internal tides are internal waves at tidal frequencies and are generated by interaction of the barotropic surface tide with bottom topography. Being dependent on ocean stratification and background currents, internal tides tend to be highly variable in time, sometimes almost erratic, yet in the open ocean the lowest mode can travel great distances across ocean basins while remaining phase-locked with the astronomical potential. Internal tides are an important energy source for ocean mixing.

R.D. Ray

2013-01-01T23:59:59.000Z

175

international programs  

National Nuclear Security Administration (NNSA)

9%2A en International Programs http:nnsa.energy.govaboutusourprogramsemergencyoperationscounterterrorisminternationalprograms

176

Crystallization and preliminary analysis of xenobiotic reductase B from Pseudomonas fluorescens I-C  

Science Journals Connector (OSTI)

Xenobiotic reductase B from P. fluorescens I-C catalyzes the NADPH-dependent, nitrite elimination from nitroglycerin to yield 1,3-dinitroglycerol. Crystallization and analysis of the X-ray data for this FMN-containing enzyme is reported.

Orville, A.M.

2004-06-22T23:59:59.000Z

177

SN 2005at - A neglected type Ic supernova at 10 Mpc  

E-Print Network [OSTI]

We present a photometric and spectroscopic study of a reddened type Ic supernova (SN) 2005at. We report our results based on the available data of SN 2005at, including late-time observations from the Spitzer Space Telescope and the Hubble Space Telescope. In particular, late-time mid-infrared observations are something rare for type Ib/c SNe. In our study we find SN 2005at to be very similar photometrically and spectroscopically to another nearby type Ic SN 2007gr, underlining the prototypical nature of this well-followed type Ic event. The spectroscopy of both events shows similar narrow spectral line features. The radio observations of SN 2005at are consistent with fast evolution and low luminosity at radio wavelengths. The late-time Spitzer data suggest the presence of an unresolved light echo from interstellar dust and dust formation in the ejecta, both of which are unique observations for a type Ic SN. The late-time Hubble observations reveal a faint point source coincident with SN 2005at, which is very ...

Kankare, E; Ryder, S; Romero-Canizales, C; Mattila, S; Kotak, R; Laursen, P; Monard, L A G; Salvo, M; Vaisanen, P

2014-01-01T23:59:59.000Z

178

State University of New York at Binghamton Instrumentation and Controls (I&C) Specialist  

E-Print Network [OSTI]

and settings of instrumentation and control devices associated with University's HVAC components. Duties to issues associated with electrical or electronic components of common HVAC systems such as air handling that all variable speed drives and I&C devices specified in projects conform to campus standards

Suzuki, Masatsugu

179

Linear Regression and Random Forests for Layer Identification in IC Layout Reverse-Engineering  

E-Print Network [OSTI]

050 051 052 053 Linear Regression and Random Forests for Layer Identification in IC Layout Reverse in the process; the bulk of the work consists of tracing from the die images the regions which form components, resistors, and capacitors. The common types of layers are the bulk (substrate, i.e. the base silicon

de Freitas, Nando

180

A Study of IR-drop Noise Issues in 3D ICs with Through-Silicon-Vias  

E-Print Network [OSTI]

ICs. The shorter wirelength further indicates improvement in performance, power, and foot print area in a near future. However, power delivery is believed to be one of the most challenging problems in 3D ICs. A main objective of the 3D power/ground (P/G) network optimization is to minimize the usage of P/G TSVs

Lim, Sung Kyu

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

STAirEMENT OF CONSIDERATIONS REQUEST BY IC GOMES b oNSUL TING AND INVESTEMENT INC., FOR  

Broader source: Energy.gov (indexed) [DOE]

STAirEMENT OF CONSIDERATIONS STAirEMENT OF CONSIDERATIONS REQUEST BY IC GOMES b oNSUL TING AND INVESTEMENT INC., FOR WAIVER OF DOMESTIC }\ND FOREIGN PATENT RIGHTS IN THE IDENTIFIED INVENTIONS, DOE DOCKFT NO. S-119,346; S-119,479; AND S-126, 113, MADE IN COLLABORATION WIT ~ AN INVENTOR FROM ARGONNE NATIONAL LABORATORY; W(1)2012-003 , CH-1647 ; W(l)2012-004 , CH-1648; W(1)2012-005 , CH-1649. I This waiver request is for/ domestic and foreign rights in three joint identified inventions made by employees of Argonne Nlational Laboratory (ANL or Lab) and IC Gomes Consulting and Investment Inc., (IC Gomes). The identified inventions were made during a collaborative interchange between an ANL inve tor and ltacil Gomes, an inventor and principal of IC Gomes. In order to commercialize the tech ology, IC Gomes hereby requests the instant patent waiver to

182

Confrence EXON2004, International Symposium on Exotic Nuclei, Peterhof, 5-12 july 2004 UCX TARGET DESIGN FOR THE SPIRAL 2 PROJECT AND  

E-Print Network [OSTI]

by a neutron flow created by bombarding a carbon converter with a 40 MeV high intensity deuteron beam DESIGN FOR THE SPIRAL 2 PROJECT AND THE ALTO PROJECT O. BAJEAT* , F. AZAIEZ, C. BOURGEOIS, M. CHEIKH radiation. For the SPIRAL 2 project, the fission of 238 U in uranium carbide target will be induced

Paris-Sud XI, Université de

183

Proceedings of the 2007 IEEE 10th International Conference on Rehabilitation Robotics, June 12-15, Noordwijk, The Netherlands Biomechanical Design of a Powered Ankle-Foot Prosthesis  

E-Print Network [OSTI]

-15, Noordwijk, The Netherlands Biomechanical Design of a Powered Ankle-Foot Prosthesis Samuel K. Au, Jeff Weber, and Hugh Herr Abstract-Although the potential benefits of a powered ankle- foot prosthesis have been well such a development is the challenge of building an ankle-foot prosthesis that matches the size and weight

Herr, Hugh

184

ATF ICS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

final focus system (PMQs) into a single vacuum box * Eventually implement high-rep rate gun (1 kHz) and laser to gain another factor of 100 in flux * 100 - 10,000 improvement in...

185

Validation of the International Code Compliant Calculator (IC3) Using the RESNET Verification Procedures (No. 07-003)  

E-Print Network [OSTI]

with high-efficiency windows, which have an overall U-factor of 0.30 and an overall Solar Heat Gain Coefficient (SHGC) of 0.335. ? Case L140: Zero Window Area. The same as Case L100 except that the windows are replaced with wood frame walls having R-11....65 1.2 1.2 0.35 0.35 Window SHGC o (heating) 0.340 0.340 0.340 0.340 0.340 0.340 0.340 0.340 Window SHGC o (cooling) 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 SLA o * (ft 2 /ft 2 ) IECC 2004 0.00048 0.00048 0.00048 0.00048 0.00048 0.00048 0...

Malhotra, Mini; Kim, Hyojin; Liu, Zi; Haberl, Jeff

186

Validation of the International Code Compliant Calculator (IC3) v3.10 Using the RESNET Verification Procedures  

E-Print Network [OSTI]

verification procedure consists of the five test suites: 1) Tier one of the HERS BESTEST; 2) IECC Code Reference Home auto-generation tests; 3) HVAC tests; 4) Duct distribution system efficiency tests; and 5) Hot water system performance tests... ........................................................................................ 11 2.5. Hot Water System Performance Tests ........................................................................................................... 13 3. CONCLUSIONS...

Kim, H.; Baltazar, J. C.; Haberl, J. S.

187

International telecommunications  

Science Journals Connector (OSTI)

... A NEW Japanese telecommunications company established by Cable and Wireless of the United Kingdom began international services last week ... company an operating licence (see Nature 326, 319; 1987). The costs of international telecommunications in Japan are expected to drop significantly as a result of the new competition. ...

David Swinbanks

1989-05-11T23:59:59.000Z

188

ENGINEERING INTERNATIONAL  

E-Print Network [OSTI]

Sydney is Australia's largest city and its centre of finance and commerce. The Harbour Bridge, Opera House and Sydney Tower are internationally recognised icons, which represent both Sydney and its rich developed close links with many international institutions, particularly in Asia. ENGINEERING IN SYDNEY

University of Technology, Sydney

189

Internal Communication  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

9 Internal Communication Process 11_0303 Page 1 of 6 9 Internal Communication Process 11_0303 Page 1 of 6 EOTA - Business Process Document Title: Internal Communication Process Document Number: P-009 Rev 11_0303 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001 Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): N/A P-009 Internal Communication Process 11_0303 Page 2 of 6 Revision History: Rev. Description of Change A Initial Release 09_0902 Modified process to better fit current practice. 10_0831 Added verbiage to clarify process. Added initiation phrase to process steps. 11_0303 Added QAM to the last step and made minor editorial updates. P-009 Internal Communication Process 11_0303 Page 3 of 6 I. Purpose

190

Sykes, M.T., I.C. Prentice, and W. Cramer. 1996. A bioclimatic  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sykes, M.T., I.C. Prentice, and W. Cramer. 1996. A bioclimatic Sykes, M.T., I.C. Prentice, and W. Cramer. 1996. A bioclimatic model for the potential distributions of north European tree species under present and future climates. Journal of Biogeography 23(2):203- 233. A bioclimatic model based on physiological constraints to plant growth and regeneration is used here in an empirical way to describe the present natural distributions of northern Europe's major trees. Bioclimatic variables were computed from monthly means of temperature, precipitation and sunshine (%) interpolated to a 10' grid taking into account elevation. Minimum values of mean coldest-month temperature (T-c) and 'effective' growing degree days (GDD*) were fitted to species' range limits. GDD* is total annual growing degree days (GDD) minus GDD to budburst (GDD(o)). Each species was assigned to one of the

191

Suite 4000. 9.5 L%nfcinr Pi& S. Ic:, W  

Office of Legacy Management (LM)

4000. 9.5 L%nfcinr Pi& S. Ic:, W 4000. 9.5 L%nfcinr Pi& S. Ic:, W ' ashingron. DC. 20024-217-1. Telephone: (202) 488 6000 7117-03.87.cdy.27 : 27 May 1987 Hr. Andrew Wallo, III, NE:23 Division of Facility.& Site Decommissioning Projects U.S. Department of Energy Germantown, Maryland,.. 20545 Dear Mr. Wallo: \. STATUS OF ACTIONS - FUSRAP SITE LIST Aerospace recently completed a comprehensive review of sites listed in the FUSRAP.Site Investigation and Remedial Action Summary Report, dated December 31, 1986. The primary objectives of this review were to examine the status of each site identified in Sections II and III of the Report with respect to actions required to complete the Identification and Characterization Process; to provide DFSD a current status of these actions; and to identify

192

Lenticular galaxy IC 719: current building of the counterrotating large-scale stellar disk  

E-Print Network [OSTI]

We have obtained and analyzed long-slit spectral data for the lenticular galaxy IC 719. In this gas-rich S0 galaxy, its large-scale gaseous disk counterrotates the global stellar disk. Moreover in the IC 719 disk we have detected a secondary stellar component corotating the ionized gas. By using emission-line intensity ratios, we have proved the gas excitation by young stars and so are claiming current star formation, most intense in a ring-like zone at the radius of 10" (1.4 kpc). The oxygen abundance of the gas in the starforming ring is about half of the solar abundance. Since the stellar disk remains dynamically cool, we conclude that smooth prolonged accretion of the external gas from a neighboring galaxy provides urrent building of the thin large-scale stellar disk.

Katkov, Ivan Yu; Afanasiev, Victor L

2013-01-01T23:59:59.000Z

193

Negative resistances in nonlinear lumped acoustic systems and IC?engine source data  

Science Journals Connector (OSTI)

Negative real parts of impedances can be found in IC?engine source characterization measurements. There is an obvious problem with the physical interpretation of negative resistances and consequently there have been many questions about the validity of such results. This paper is an attempt to explain the origin of the mentioned negative acoustic resistances. To this end a simple nonlinear lumped acoustic system that is a force?driven damped mass?spring system is analyzed. Since this is a common case in acoustic measurements linear analysis is performed in spite of the obvious nonlinear properties. It is shown that the degree of nonlinearity in the system is crucial to the values of the acoustic impedance. Furthermore it is shown that it is possible to achieve negative resistances already in a simple lumped system. Finally these results are also compared to simulated and measured IC?engine source impedances.

Fredrik Albertson

1999-01-01T23:59:59.000Z

194

Development of Improved Models and Designs for Coated-Particle Gas Reactor Fuels -- Final Report under the International Nuclear Energy Research Initiative (I-NERI)  

SciTech Connect (OSTI)

The objective of this INERI project was to develop improved fuel behavior models for gas reactor coated-particle fuels and to explore improved coated-particle fuel designs that could be used reliably at very high burnups and potentially in gas-cooled fast reactors. Project participants included the Idaho National Engineering Laboratory (INEEL), Centre Étude Atomique (CEA), and the Massachusetts Institute of Technology (MIT). To accomplish the project objectives, work was organized into five tasks.

David Petti; Philippe Martin; Mayeul Phélip; Ronald Ballinger; Petti does not have NT account

2004-12-01T23:59:59.000Z

195

THE FAST AND FURIOUS DECAY OF THE PECULIAR TYPE Ic SUPERNOVA 2005ek  

SciTech Connect (OSTI)

We present extensive multi-wavelength observations of the extremely rapidly declining Type Ic supernova (SN Ic), SN 2005ek. Reaching a peak magnitude of M{sub R} = -17.3 and decaying by {approx}3 mag in the first 15 days post-maximum, SN 2005ek is among the fastest Type I supernovae observed to date. The spectra of SN 2005ek closely resemble those of normal SN Ic, but with an accelerated evolution. There is evidence for the onset of nebular features at only nine days post-maximum. Spectroscopic modeling reveals an ejecta mass of {approx}0.3 M{sub Sun} that is dominated by oxygen ({approx}80%), while the pseudo-bolometric light curve is consistent with an explosion powered by {approx}0.03 M{sub Sun} of radioactive {sup 56}Ni. Although previous rapidly evolving events (e.g., SN 1885A, SN 1939B, SN 2002bj, SN 2010X) were hypothesized to be produced by the detonation of a helium shell on a white dwarf, oxygen-dominated ejecta are difficult to reconcile with this proposed mechanism. We find that the properties of SN 2005ek are consistent with either the edge-lit double detonation of a low-mass white dwarf or the iron-core collapse of a massive star, stripped by binary interaction. However, if we assume that the strong spectroscopic similarity of SN 2005ek to other SNe Ic is an indication of a similar progenitor channel, then a white-dwarf progenitor becomes very improbable. SN 2005ek may be one of the lowest mass stripped-envelope core-collapse explosions ever observed. We find that the rate of such rapidly declining Type I events is at least 1%-3% of the normal SN Ia rate.

Drout, M. R.; Soderberg, A. M.; Margutti, R.; Milisavljevic, D.; Sanders, N. E.; Chornock, R.; Foley, R. J.; Kirshner, R. P.; Chakraborti, S.; Challis, P.; Friedman, A.; Hicken, M.; Jensen, C. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Mazzali, P. A. [Astrophysics Research Institute, Liverpool John Moores University, CH41 1LD Liverpool (United Kingdom); Parrent, J. T. [Department of Physics and Astronomy, Dartmouth College, 6127 Wilder Laboratory, Hanover, NH 03755 (United States); Filippenko, A. V.; Li, W.; Cenko, S. B.; Ganeshalingam, M. [Department of Astronomy, University of California, Berkeley, CA 94720-3411 (United States); Brown, P. J., E-mail: mdrout@cfa.harvard.edu [Department of Physics and Astronomy, Texas A and M University, College Station, TX 77843-4242 (United States); and others

2013-09-01T23:59:59.000Z

196

A}!.t\.i.~ ILl-.O ,;\I~~~t\. O?~IC:::  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

lli'IJ'rJ'::~ ~j'[~\'l'ES li.TO~'lI\: -::::.2:::~G\' C(l~ ~~·:.:~SJO~~ A}!.t\.i.~ ILl-.O ,;\I~~~t\. O?~IC::: p. O. 30X 1086 !.}::UtII..:.o, -::::':,:':\.S 79105 CONTRACT i;O. AT(29-2)-2723 TI1is Contr~~~. e~:c~cd i~t0 effective as hcrcinafcer provided, by nnd lJet'\'lCen J~L·:.E ~r~'rIT=J S7J;~·..:'ES OEI ~\~'2:\IC.7\. (:l.Creir1,3rter callQ,d. the "Covern.'1en:::"), ~c?rcsc"tec by t~e U. S. A'IO:,lIC E:;Z;.lGY CO\;:,r:;:SS:W~,;1 s· ANARILlD AREA Or"FICE (:1e:-einarcer cal:i.ed the "illiC") and the CIT{ OF ANARILLO, '.:.i:X,<;'S (hercinari:er called the !ICity").

197

Investigation of the bases for use of the K sub Ic curve  

SciTech Connect (OSTI)

Title 10 of the Code of Federal Regulations, Part 50 (10CFR50), Appendix G, establishes the bases for setting allowable pressure and temperature limits on reactors during heatup and cooldown operation. Both the K{sub Ic} and K{sub Ia} curves are utilized in prescribed ways to maintain reactor vessel structural integrity in the presence of an assumed or actual flaw and operating stresses. Currently, the code uses the K{sub Ia} curve, normalized to the RT{sub NDT}, to represent the fracture toughness trend for unirradiated and irradiated pressure vessel steels. Although this is clearly a conservative policy, it has been suggested that the K{sub Ic} curve is the more appropriate for application to a non-accident operating condition. A number of uncertainties have been identified, however, that might convert normal operating transients into a dynamic loading situation. Those include the introduction of running cracks from local brittle zones, crack pop-ins, reduced toughness from arrested cleavage cracks, description of the K{sub Ic} curve for irradiated materials, and other related unresolved issues relative to elastic-plastic fracture mechanics. Some observations and conclusions can be made regarding various aspects of those uncertainties and they are discussed in this paper. A discussion of further work required and under way to address the remaining uncertainties is also presented.

McCabe, D.E.; Nanstad, R.K. (Oak Ridge National Lab., TN (USA)); Rosenfield, A.R.; Marschall, C.W. (Battelle, Columbus, OH (USA)); Irwin, G.R. (Maryland Univ., College Park, MD (USA))

1991-01-01T23:59:59.000Z

198

Three Essays on International Agricultural Trade  

E-Print Network [OSTI]

,269 .5 11. 2 1,264. 6 1 0. 8 H id al go -B ro w ns vi lle 340 .6 176.6 -48.1 179. 2 -4 7. 4 179. 6 -4 7. 3 T ot al U .S. -M ex ic o B or de r P or ts 1, 481 .9 1, 473...i THREE ESSAYS ON INTERNATIONAL AGRICULTURAL TRADE A Dissertation by RAFAEL DE FARIAS COSTA Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree...

Costa, Rafael

2012-07-16T23:59:59.000Z

199

Voluntary disclosure of intellectual capital in the Brazilian context: an investigation informed by the international context  

Science Journals Connector (OSTI)

This study investigates whether and how Brazilian companies disclose Intellectual Capital (IC) in their Annual Reports (ARs) and whether this voluntary disclosure behaves in a way similar to that in the international context. The study examines the ARs of the 25 top Brazilian open organisations (Social Capital) listed at BOVESPA (Sao Paulo Stock Exchange) on 31 December 2004. The 'content analysis' technique (Guthrie et al., 1999) was used together with Sveiby's classificatory framework (1997). The study revealed a: high incidence of voluntary IC disclosure in ARs of Brazilian organisations; trend towards disclosure in qualitative (narrative) terms; high frequency of External Capital (EC) as an IC category; similarity in the results obtained both in the Brazilian and the international contexts, particularly as regards similar studies in Australia and Sri Lanka: reporting EC is more in favour in the three contexts with differences regarding the most reported element.

Sandra Rolim Ensslin; Fernando Nitz De Carvalho

2007-01-01T23:59:59.000Z

200

International Portfolio  

Broader source: Energy.gov [DOE]

The U.S.-China Clean Energy Research Center (CERC) is a multi-year international effort focused on developing and implementing energy efficiency technologies in both the USA and in China. The...

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

International Journal of Hydrogen Energy 32 (2007) 886894 www.elsevier.com/locate/ijhydene  

E-Print Network [OSTI]

reduction reaction (ORR) kinet- ics, low membrane hydration and dominant oxygen depletion as the mainInternational Journal of Hydrogen Energy 32 (2007) 886­894 www, , Chao-Yang Wanga , Ay Sub aElectrochemical Engine Center (ECEC), Department of Mechanical and Nuclear

202

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, VOL. 52, NO. 3, JUNE 2003 839 Comparison of IC Conducted Emission  

E-Print Network [OSTI]

of IC Conducted Emission Measurement Methods Franco Fiori, Member, IEEE, and Francesco Musolino, Member, IEEE Abstract--This paper deals with the electromagnetic emissions of integrated circuits. In particular, four measurement techniques to evaluate integrated circuit conducted emissions are described

203

MU INTERNATIONAL DIRECTORY International Directory  

E-Print Network [OSTI]

of Ag., Food & Natural Resources International Programs http://students.missouri.edu/~asa Association of Malaysian Students http://www.missouri.edu/~ctl2m5/index.html Bangladesh Student Association

Taylor, Jerry

204

Analysis of microelectronic power distribution networks and exploration of 3D ICs  

E-Print Network [OSTI]

Regulator Based Power Distribution Design Under WorstTanmoy Roy. Power Distribution System Design Methodology andChen, “3D Power Distribution Network Co-design for Nanoscale

Hu, Xiang

2012-01-01T23:59:59.000Z

205

The LBT Panoramic View on the Recent Star-Formation Activity in IC2574  

E-Print Network [OSTI]

We present deep imaging of the star-forming dwarf galaxy IC2574 in the M81 group taken with the Large Binocular Telescope in order to study in detail the recent star-formation history of this galaxy and to constrain the stellar feedback on its HI gas. We identify the star-forming areas in the galaxy by removing a smooth disk component from the optical images. We construct pixel-by-pixel maps of stellar age and stellar mass surface density in these regions by comparing their observed colors with simple stellar populations synthesized with STARBURST99. We find that an older burst occurred about 100 Myr ago within the inner 4 kpc and that a younger burst happened in the last 10 Myr mostly at galactocentric radii between 4 and 8 kpc. We analyze the stellar populations residing in the known HI holes of IC2574. Our results indicate that, even at the remarkable photometric depth of the LBT data, there is no clear one-to-one association between the observed HI holes and the most recent bursts of star formation in IC2574. The stellar populations formed during the younger burst are usually located at the periphery of the HI holes and are seen to be younger than the holes dynamical age. The kinetic energy of the holes expansion is found to be on average 10% of the total stellar energy released by the stellar winds and supernova explosions of the young stellar populations within the holes. With the help of control apertures distributed across the galaxy we estimate that the kinetic energy stored in the HI gas in the form of its local velocity dispersion is about 35% of the total stellar energy.

A. Pasquali; A. Leroy; H. -W. Rix; F. Walter; T. Herbst; E. Giallongo; R. Ragazzoni; A. Baruffolo; R. Speziali; J. Hill; G. Beccari; N. Bouche'; P. Buschkamp; C. Kochanek; E. Skillman; J. Bechtold

2008-08-01T23:59:59.000Z

206

Internal Dosimetry  

Broader source: Energy.gov (indexed) [DOE]

MEASUREMENT MEASUREMENT SENSITIVE DOE-STD-1121-2008 Change Notice No.1 October 2013 DOE STANDARD INTERNAL DOSIMETRY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document is available on the Department of Energy Technical Standards Program Web Site at http://energy.gov/hss/information-center/department-energy- technical-standards-program ii Change Notice 1. Internal Dosimetry DOE-STD-1121-2008 Page/Section Change Throughout Change: airborne contamination To: airborne radioactivity Section 1.5, p. 4 Change: HPS N 13.1-1999 To: HPS N 13.1-2011 Section 1.5, p. 4 Change: HPS N 13.6-1999 To: HPS N 13,.6-2010 Section 1.5, p. 4 Delete: HPS N 13.14-1994, Internal Dosimetry Programs for

207

A Continuous Solar Thermochemical Hydrogen Production Plant Design  

E-Print Network [OSTI]

generated internally from waste heat. The only xv input intogenerated internally from waste heat. The SA process will bewas designed to utilize waste heat from a nuclear power

Luc, Wesley Wai

208

International Educational  

E-Print Network [OSTI]

International Journal of Educational Technology Opportunities and options for Web-enabled databases.D., Arizona State University The landscape of Web-based instruction is changing due to the convergence of the Web and database servers. Web-based database (WBD) servers enhance Web-based instruction by providing

Yu, Alex

209

INTERNATIONAL STUDYCENTRE  

E-Print Network [OSTI]

;6 Experiential Learning 8 21st Century Education 9 Supporting your Success 18 Financing your Castle Education is located in a 15th century castle, but our focus is the 21st century, an age of networks and processes escaping the Nazis, Dr. Alfred Bader fled to England in 1938, from where he was sent to an internment camp

Abolmaesumi, Purang

210

INTERNATIONAL STUDYCENTRE  

E-Print Network [OSTI]

;6 Experiential Learning 8 21st Century Education 9 Supporting your Success 18 Financing your Castle Education in a 15th century castle, but our focus is the 21st, a century of networks and processes.Where people escaping the Nazis, Dr. Alfred Bader fled to England in 1938, from where he was sent to an internment camp

Graham, Nick

211

THE CARNEGIE HUBBLE PROGRAM: THE INFRARED LEAVITT LAW IN IC 1613  

SciTech Connect (OSTI)

We have observed the dwarf galaxy IC 1613, at multiple epochs in the mid-infrared using Spitzer and contemporaneously in the near-infrared using the new FourStar near-infrared camera on Magellan. We have constructed Cepheid period-luminosity relations in the J, H, K{sub s} , [3.6] and [4.5] bands and have used the run of their apparent distance moduli as a function of wavelength to derive the line-of-sight reddening and distance to IC 1613. Using a nine-band fit, we find E(B - V) = 0.05 {+-} 0.01 mag and an extinction-corrected distance modulus of {mu}{sub 0} = 24.29 {+-} 0.03{sub statistical} {+-} 0.03{sub systematic} mag. By comparing our multi-band and [3.6] distance moduli to results from the tip of the red giant branch and red clump distance indicators, we find that metallicity has no measurable effect on Cepheid distances at 3.6 {mu}m in the metallicity range -1.0 {<=} [Fe/H] {<=} 0.2, hence derivations of the Hubble constant at this wavelength require no correction for metallicity.

Scowcroft, Victoria; Freedman, Wendy L.; Madore, Barry F.; Monson, Andrew J.; Persson, S. E.; Seibert, Mark [Observatories of the Carnegie Institution for Science, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Rigby, Jane R. [Observational Cosmology Laboratory, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Melbourne, Jason, E-mail: vs@obs.carnegiescience.edu, E-mail: wendy@obs.carnegiescience.edu, E-mail: barry@obs.carnegiescience.edu, E-mail: amonson@obs.carnegiescience.edu, E-mail: persson@obs.carnegiescience.edu, E-mail: mseibert@obs.carnegiescience.edu, E-mail: jane.r.rigby@nasa.gov, E-mail: jmel@caltech.edu [Caltech Optical Observatories, Division of Physics, Mathematics and Astronomy, Mail Stop 301-17, California Institute of Technology, Pasadena, CA 91125 (United States)

2013-08-20T23:59:59.000Z

212

Internal Communication  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Graphic Design Support Process 11_0426 Page 1 of 5 2 Graphic Design Support Process 11_0426 Page 1 of 5 EOTA - Business Process Document Title: Graphic Design Support Process Document Number: ITTP-012 Rev. 11_0426 Document Owner: Pat Chavez Backup Owner: Ben Aragon Approver(s): Melissa Otero Parent Document: Q-001 Quality Manual Notify of Changes: All EOTA Employees Referenced Document(s): ITTF-017 Graphic Design Support Log ITTP-012 Graphic Design Support Process 11_0426 Page 2 of 5 Revision History: Rev. Description of Change A Initial Release 08_0430 Removed unnecessary text from Section IV, reworded text in same paragraph. Reworded text in Section 2.0 to clarify process. Modified text in Process flowchart to reflect process changes. 09_0909 Added notification of Requestor to process.

213

Ultra Low-Cost 3.2Gb/s Optical-Rate Reed Solomon Decoder IC Design  

E-Print Network [OSTI]

decoder by using a novel Just-in-Time Folding Modified Euclidean Algorithm (JIT-FMEA). The JIT- FMEA VLSI called Just-in-Time Folding Modified Euclidean Algorithm (JIT-FMEA), which can construes an ultra low of JIT-FMEA architecture can overcome the critical paths of the bottleneck in a RS decoding procedure

Hung, Shih-Hao

214

INTERNATIONAL AGREEMENTS  

Broader source: Energy.gov (indexed) [DOE]

INTERNATIONAL INTERNATIONAL AGREEMENTS Signed by Secretary Spencer Abraham January 2001-December 2004 TABLE OF CONTENTS Joint Statement of ntent between the Department of Energy of the United States ofAmerica and The Ministry of Energy and Mines of the Republic ofPeru on Cooperation in the Field of Energy -Tab 1 Fifth Hemispheric Energy Ministers Meeting Mexico City, Mexico - March 9, 2001. Mexico Declaration - Energy: A Crucial Factor for Integration and Sustainable Development in the Hemisphere - Tab 2 Extension of the Agreement for Energy Cooperation between the Department of Energy of the United States ofAmerica and the Secretariat ofEnergy of the United Mexican States, and its Four Annexes - Tab3 Implementing Agreement between the Department ofEnergy of the United States ofAmerica and the

215

On-Chip Test Infrastructure Design for Optimal Multi-Site Testing of System Chips  

E-Print Network [OSTI]

On-Chip Test Infrastructure Design for Optimal Multi-Site Testing of System Chips Sandeep Kumar Goel Erik Jan Marinissen Philips Research Laboratories IC Design ­ Digital Design & Test Prof.Jan.Marinissen¡ @philips.com Abstract Multi-site testing is a popular and effective way to increase test throughput

Paris-Sud XI, Université de

216

NGC 2207/IC 2163: A GRAZING ENCOUNTER WITH LARGE-SCALE SHOCKS  

SciTech Connect (OSTI)

Radio continuum, Spitzer infrared, optical, and XMM-Newton X-ray and ultraviolet observations (UVW1 and UVM2) are used to study large-scale shock fronts, young star complexes, and the galactic nuclei in the interacting galaxies NGC 2207/IC 2163. There are two types of large-scale shock fronts in this galaxy pair. The large-scale shock front along the rim of the ocular oval in IC 2163 has produced vigorous star formation in a dusty environment, bright in the Spitzer 8 {mu}m and 24 {mu}m images. In the outer part of the companion side of NGC 2207, a large-scale front attributed to halo scraping is particularly bright in the {lambda}6 cm and {lambda}20 cm radio continuum but not in any tracers of recent star formation (H{alpha}, 8 {mu}m, 24 {mu}m, or ultraviolet emission) or in X-rays. This radio-continuum front may be from compression of the halo magnetic field on the back side of NGC 2207, between the two galaxies. The X-ray emission sets an upper limit to the gas density in the halo. Values of the flux density ratio S{sub {nu}}(8 {mu}m)/S{sub {nu}}(6 cm) of prominent, kiloparsec-size, Spitzer/IRAC star-forming clumps in NGC 2207/IC 2163 are compared with those of giant radio H II regions in M81. For the bright clumps in NGC 2207, the mean value of this ratio is the same as for the M81 H II regions, whereas for the bright clumps on the rim of the IC 2163 ocular oval, the mean value is nearly a factor of two greater. Possible explanations for this are discussed. The galaxy pair has global values of the ratios of infrared-to-radio continuum flux density in the Spitzer 8 {mu}m, 24 {mu}m, and 70 {mu}m bands, and the IRAS FIR significantly below the medians/means for large samples of galaxies. Feature i, a mini-starburst on an outer arm of NGC 2207 on its anti-companion side, is the most luminous 8 {mu}m, 24 {mu}m, 70 {mu}m, radio continuum, and H{alpha} source in the galaxy pair. We find evidence that a radio supernova was present in the core of feature i in 2001. X-ray emission is detected from the nucleus of NGC 2207 and from nine discrete sources whose X-ray luminosities make them possible candidates for Ultraluminous X-ray sources. One of these corresponds with the Type Ib SN 1999ec, which is also bright in the ultraviolet, and another may be a radio supernova or a background quasar. The X-ray luminosity of the NGC 2207 nucleus is log L{sub 0.3-10.0keV} = 40.6 erg s{sup -1}, which, together with its X-ray spectrum, suggests that this is a highly absorbed, low-luminosity, active galactic nucleus.

Kaufman, Michele [Department of Physics, Ohio State University, 191 West Woodruff Ave, Columbus, OH 43210 (United States); Grupe, Dirk [Department of Astronomy and Astrophysics, Pennsylvania State University, 525 Davey Lab, University Park, PA 16802 (United States); Elmegreen, Bruce G. [IBM Research Division, T. J. Watson Research Center, P.O. Box 218, Yorktown Heights, NY 10598 (United States); Elmegreen, Debra M. [Department of Physics and Astronomy, Vassar College, 124 Raymond Ave., Poughkeepsie, NY 12604 (United States); Struck, Curtis [Department of Physics and Astronomy, Iowa State University, Ames, IA 50011 (United States); Brinks, Elias, E-mail: rallis.1@osu.edu, E-mail: dxg35@psu.edu, E-mail: bge@us.ibm.com, E-mail: elmegreen@vassar.edu, E-mail: curt@iastate.edu, E-mail: E.Brinks@herts.ac.uk [Centre for Astrophysics Research, University of Hertfordshire, College Lane, Hatfield AL10 9AB (United Kingdom)

2012-11-01T23:59:59.000Z

217

DISCOVERY OF TWO SUPERNOVAE IN THE NUCLEAR REGIONS OF THE LUMINOUS INFRARED GALAXY IC 883  

SciTech Connect (OSTI)

We report the discovery of two consecutive supernovae (SNe), 2010cu and 2011hi, located at 0.''37 (180 pc) and 0.''79 (380 pc) projected distance, respectively, from the center of the K-band nucleus of the luminous infrared galaxy (LIRG) IC 883. The SNe were discovered in an ongoing near-infrared K-band search for core-collapse SNe in such galaxies using the ALTAIR/NIRI adaptive optics system with laser guide star at the Gemini-North Telescope. These are thus the closest SNe yet discovered to an LIRG nucleus in optical or near-infrared wavelengths. The near-infrared light curves and colors of both SNe are consistent with core-collapse events. Both SNe seem to suffer from relatively low host galaxy extinction suggesting that regardless of their low projected galactocentric distances, they are not deeply buried in the nuclear regions of the host galaxy.

Kankare, E.; Mattila, S.; Takalo, A. [Tuorla Observatory, Department of Physics and Astronomy, University of Turku, Vaeisaelaentie 20, FI-21500 Piikkioe (Finland); Ryder, S. [Australian Astronomical Observatory, P.O. Box 296, Epping, NSW 1710 (Australia); Vaeisaenen, P. [South African Astronomical Observatory, P.O. Box 9, Observatory 7935 (South Africa); Alberdi, A.; Perez-Torres, M.-A.; Romero-Canizales, C. [Instituto de Astrofsica de Andalucia, IAA-CSIC, Apartado 3004, 18080 Granada (Spain); Alonso-Herrero, A.; Colina, L. [Departamento de Astrofisica, Centro de Astrobiologia, CSIC/INTA, Carretera de Torrejon a Ajalvir, km 4, 28850, Torrejon de Ardoz, Madrid (Spain); Efstathiou, A. [School of Sciences, European University Cyprus, Diogenes Street, Engomi, 1516 Nicosia (Cyprus); Kotilainen, J. [Finnish Centre for Astronomy with ESO (FINCA), University of Turku, Vaeisaelaentie 20, FI-21500 Piikkioe (Finland); Melinder, J., E-mail: erkki.kankare@utu.fi [Department of Astronomy, Oskar Klein Centre, Stockholm University, AlbaNova University Centre, 106 91 Stockholm (Sweden)

2012-01-10T23:59:59.000Z

218

International linear collider reference design report  

E-Print Network [OSTI]

LV power. All HV and MV substations - including the one atto the utilitys HV transmission system via a main substation

Aarons, G.

2008-01-01T23:59:59.000Z

219

International Entry Decision for Design Firms  

E-Print Network [OSTI]

to private information can enlarge the pool of potentially beneficial transactions that are not available through market 23 means. Romo and Schwartz (1995) findings suggest that embedded actors shift their focus from the narrow economically rational...

Tohidi Vahdat, Amin

2013-11-22T23:59:59.000Z

220

International linear collider reference design report  

E-Print Network [OSTI]

m Shaft with Underground Cavern, Service and Beam Tunnels (Hall, showing BDS Service Cavern Arrangement 4.2-6 4.4-1 AirConstruction Water Halls Caverns e ? ML Shaft Base Caverns

Aarons, G.

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

International linear collider reference design report  

E-Print Network [OSTI]

regions provide for a main substation located at or near thesystem via a main substation located at the centrallocation of utilitys substations; regional voltage standards

Aarons, G.

2008-01-01T23:59:59.000Z

222

International linear collider reference design report  

E-Print Network [OSTI]

2.1-4 2.2-1 Electron Source SystemConsiderations 2.2 Electron Source . . . . . . . . . . . . .Electron Source . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Aarons, G.

2008-01-01T23:59:59.000Z

223

WIDE-FIELD SURVEY OF EMISSION-LINE STARS IN IC 1396  

SciTech Connect (OSTI)

We have made an extensive survey of emission-line stars in the IC 1396 H II region to investigate the low-mass population of pre-main-sequence (PMS) stars. A total of 639 H{alpha} emission-line stars were detected in an area of 4.2 deg{sup 2} and their i' photometry was measured. Their spatial distribution exhibits several aggregates near the elephant trunk globule (Rim A) and bright-rimmed clouds at the edge of the H II region (Rim B and SFO 37, 38, 39, 41), and near HD 206267, which is the main exciting star of the H II region. Based on the extinction estimated from the near-infrared color-color diagram, we have selected PMS star candidates associated with IC 1396. The age and mass were derived from the extinction-corrected color-magnitude diagram and theoretical PMS tracks. Most of our PMS candidates have ages of <3 Myr and masses of 0.2-0.6 M{sub Sun }. Although it appears that only a few stars were formed in the last 1 Myr in the east region of the exciting star, the age difference among subregions in our surveyed area is not clear from the statistical test. Our results may suggest that massive stars were born after the continuous formation of low-mass stars for 10 Myr. The birth of the exciting star could be the late stage of slow but contiguous star formation in the natal molecular cloud. It may have triggered the formation of many low-mass stars at the dense inhomogeneity in and around the H II region by a radiation-driven implosion.

Nakano, M. [Faculty of Education and Welfare Science, Oita University, Oita 870-1192 (Japan); Sugitani, K. [Graduate School of Natural Sciences, Nagoya City University, Mizuho-ku, Nagoya 467-8501 (Japan); Watanabe, M. [Department of Cosmosciences, Hokkaido University, Sapporo 060-0810 (Japan); Fukuda, N. [Department of Computer Simulation, Okayama University of Science, 1-1 Ridai-cho, Okayama 700-0005 (Japan); Ishihara, D. [Department of Physics, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8602 (Japan); Ueno, M., E-mail: mnakano@oita-u.ac.jp [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshino-dai, Chuo-ku, Sagamihara 252-5210 (Japan)

2012-03-15T23:59:59.000Z

224

EM International Program Action Table  

Broader source: Energy.gov (indexed) [DOE]

EM INTERNATIONAL COOPERATIVE PROGRAM] October, 2012 EM INTERNATIONAL COOPERATIVE PROGRAM] October, 2012 E M I n t e r n a t i o n a l P r o g r a m s Page 1 ACTION TABLE Subject Lead Office Engaging Country Meeting Location Purpose Status Date of Event 3 rd US/German Workshop on Salt Repository Research, Design and Operations N. Buschman, EM-22 Germany Albuquerque & Carlsbad, NM Continue collaboration with Germans on salt repository research, design and operations. Draft agenda prepared. October 8-12, 2012 International Framework for Nuclear Energy Cooperation (IFNEC) Ministerial R. Elmetti, EM- 2.1 Multilateral Marrakech, Morocco To support the development of nuclear energy infrastructure globally through workforce training, information sharing, and approaches related to the safe, secure and responsible use of

225

INTERNAL AUDIT CHARTER 1. Introduction  

E-Print Network [OSTI]

, objective assurance and advisory activity designed to add value to and improve the University's operations and internal process as well as the quality of performance in carrying out assigned responsibilities to achieve and procedures, statutes, rules, and orders. Any conflict between these and the Charter will be brought

226

D&R International, Ltd  

Buildings Energy Data Book [EERE]

2011 Buildings Energy Data Book March 2012 Prepared for the Buildings Technologies Program Energy Efficiency and Renewable Energy U.S. Department of Energy by D&R International, Ltd. under contract to Pacific Northwest National Laboratory This version is dated: March 2012 This document was designed for the internal use of the United States Department of Energy. This document

227

A Comparison of International Regulatory Organizations and  

E-Print Network [OSTI]

A Comparison of International Regulatory Organizations and Licensing Procedures for New Nuclear the safety regulation and the licensing of new nuclear power plants. The paper considers both design safety approval and issues of site licensing. Advice from international organisations is summarised. Nuclear power

Aickelin, Uwe

228

Internal Dosimetry  

Broader source: Energy.gov (indexed) [DOE]

21-2008 21-2008 October 2008 DOE STANDARD INTERNAL DOSIMETRY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1121-2008 iii FOREWORD 1. This Department of Energy (DOE) standard is approved for use by all DOE Components and their contractors. 2. Constructive comments (recommendations, additions, deletions) and any pertinent data that may improve this document should be sent to Office of Worker Safety and Health Policy (HS-11) U.S. Department of Energy Washington, DC 20585

229

61CanCer InformatICs 2014:13(s5) Open Access: Full open access to  

E-Print Network [OSTI]

61CanCer InformatICs 2014:13(s5) Open Access: Full open access to this and thousands of other papers at http://www.la-press.com. Cancer Informatics Supplementary Issue: Network and Pathway Analysis of Cancer Susceptibility (A) Introduction Cellular signaling generates a chain of protein

Geman, Donald

230

Core-collapse explosions of Wolf–Rayet stars and the connection to Type IIb/Ib/Ic supernovae  

Science Journals Connector (OSTI)

......may even apply to SNe Ic (Jeffery et al. 1991; Branch et al...566, 1005. Branch D. , Jeffery D. J., Young T. R., Baron...2010, ApJ, 718, 957. Jeffery D. J. , Branch D., Filippenko...D. A. , Clocchiatti A., Benjamin R., Lester D. F., Wheeler......

Luc Dessart; D. John Hillier; Eli Livne; Sung-Chul Yoon; Stan Woosley; Roni Waldman; Norbert Langer

2011-07-11T23:59:59.000Z

231

Direct Laser Deposition of a Single-Crystal Ni3Al-Based IC221W Alloy  

E-Print Network [OSTI]

process based on laser cladding, which involves laser processing fine metallic powders into fully denseDirect Laser Deposition of a Single-Crystal Ni3Al-Based IC221W Alloy WEIPING LIU and J.N. Du221W alloy were produced on a SX Ni-base superalloy substrate by means of the laser-engineered net

DuPont, John N.

232

Frequency Scalable Non-Linear Waveform Generator for Mixed-Simal Power-Factor-Correction IC Controller'  

E-Print Network [OSTI]

operates with a fixed switching frequency fs and variable duty ratio R, and can be analyzed using standard of a switching period, a fixed-frequency clock pulse sets the switch drive high. A signal proportionalFrequency Scalable Non-Linear Waveform Generator for Mixed-Simal Power-Factor-Correction IC

233

2.61 Internal Combustion Engines, Spring 2004  

E-Print Network [OSTI]

Fundamentals of how the design and operation of internal combustion engines affect their performance, operation, fuel requirements, and environmental impact. Study of fluid flow, thermodynamics, combustion, heat transfer ...

Heywood, John B.

234

International Collaborations on Engineered Barrier Systems: Experimental and Modeling Investigations  

Broader source: Energy.gov [DOE]

International research collaborations on deep geological disposition of nuclear waste are a key aspect of the nation’s strategy to investigate disposal design concepts in geologic settings...

235

Analysis of a Hybrid Defect-Tolerance Scheme for High-Density Memory ICs  

E-Print Network [OSTI]

, where the design of an experimental 4 Mb SRAM w as presented. A 3 increase in the area overhead and up such new design and compare its yield to that of the traditional design. 1. Introduction The traditional by shortening the length of the bit and word lines 7 . Using the conventional redundancy methods implies

Koren, Israel

236

Caterpillar, Argonne undertake cooperative virtual engine design...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Caterpillar, Argonne undertake cooperative virtual engine design, control project By Jared Sagoff * June 30, 2014 Tweet EmailPrint ARGONNE, Ill - Internal combustion engines are...

237

UNDERSTANDING THE EFFECT OF DYNAMIC FEED CONDITIONS ON WATER RECOVERY FROM IC ENGINE EXHAUST BY CAPILLARY CONDENSATION WITH INORGANIC MEMBRANES  

SciTech Connect (OSTI)

An inorganic membrane water recovery concept is evaluated as a method to recovering water from the exhaust of an internal combustion engine. Integrating the system on-board a vehicle would create a self-sustaining water supply that would make engine water injection technologies consumer transparent . In laboratory experiments, water recovery from humidified air was measured to evaluate how different operating parameters affect the membrane system s efficiency. The observed impact of transmembrane pressure and gas flow rate suggest that gas residence time is more important than water flux through the membrane. Heat transfer modeling suggests that increasing membrane length can be used to improve efficiency and allow greater flow per membrane, an important parameter for practical applications where space is limited. The membrane water recovery concept was also experimentally validated by extracting water from diesel exhaust coming from a stationary generator. The insight afforded by these studies provides a basis for developing improved membrane designs that balance both efficiency and cost.

DeBusk, Melanie Moses [ORNL] [ORNL; Bischoff, Brian L [ORNL] [ORNL; Hunter, James A [ORNL] [ORNL; Klett, James William [ORNL] [ORNL; Nafziger, Eric J [ORNL] [ORNL; Daw, C Stuart [ORNL] [ORNL

2014-01-01T23:59:59.000Z

238

21 11 13 INTERNATIONAL  

E-Print Network [OSTI]

31 E 32 F 32 #12; iv INTERNATIONAL ERGONOMICS ASSOCIATION #12; 3 INTERNATIONAL ERGONOMICS ASSOCIATION CODE OF CONDUCT ERGONOMICS ASSOCIATION (2006) http://www.iea.cc/browse.php?contID=international_ergonomics_association A6

Yamamoto, Hirosuke

239

International Student and  

E-Print Network [OSTI]

Admissions Disability Services International Student and Scholar Services International Student of Continuing Education Theresa Ganglghassemlouei and Beth Isensee, International Student and Scholar Services Colleges & Programs Student Outcomes: · Process improvements · Enhance orientation content based

Amin, S. Massoud

240

www.cardiff.ac.uk/ifp International Foundation  

E-Print Network [OSTI]

www.cardiff.ac.uk/ifp International Foundation Programme Business, Engineering, Health & Life Sciences #12;Welcome to the International Foundation Programme at Cardiff University What is the IFP? The International Foundation Programme (IFP) is a one-year academic programme designed to give you the academic

Davies, Christopher

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

International Fuel Technology Inc | Open Energy Information  

Open Energy Info (EERE)

Fuel Technology Inc Fuel Technology Inc Jump to: navigation, search Name International Fuel Technology Inc Place St. Louis, Missouri Zip 63105 Product Supplier of environmentally friendly surfactant-based fuel additives designed to significantly reduce harmful emissions produced from internal combustion engines. References International Fuel Technology Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. International Fuel Technology Inc is a company located in St. Louis, Missouri . References ↑ "International Fuel Technology Inc" Retrieved from "http://en.openei.org/w/index.php?title=International_Fuel_Technology_Inc&oldid=347044" Categories: Clean Energy Organizations

242

w.it.uts.edu.au INTERNATIONAL  

E-Print Network [OSTI]

of research into subject design and integration into the curricula. Leaders in Artificial Intelligence\\ 2 COURSE GUIDE 2013 w w w.it.uts.edu.au UTS: INFORM ATION TECHNOLOGY INTERNATIONAL UNDERGRADUATE with strong links to the IT industry our courses are current, relevant and are designed to meet

University of Technology, Sydney

243

Version Auteur Monitoring the International Standardization Process  

E-Print Network [OSTI]

Version Auteur Monitoring the International Standardization Process Theoretical Choices are materialized in standards. The main purpose is to design both a methodology and specific text mining tools to investigate these standards. These tools will be implemented in a platform designed to provide cartographic

Boyer, Edmond

244

Vectron International | Open Energy Information  

Open Energy Info (EERE)

Vectron International Vectron International Jump to: navigation, search Name Vectron International Place Hudson, New Hampshire Zip 3051 Sector Solar Product Designs, manufactures and markets frequency control, sensor and hybrid product solutions, such as solar inverters. Coordinates 42.905035°, -108.583653° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.905035,"lon":-108.583653,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

245

International Energy Outlook 1998  

Gasoline and Diesel Fuel Update (EIA)

Appendix C Appendix C A Status Report on Developing Transportation for Caspian Basin Oil and Gas Production Prior to the breakup of the Soviet Union, the petroleum transportation networks in Azerbaijan, Kazakhstan, and Turkmenistan were designed to provide petroleum to the internal Soviet economy and, in particular, to meet the Soviet militaryÂ’s need for petroleum [1]. Investment in the Caspian Basin petroleum transportation system was, however, severely deficient. In order for the producers in the Caspian Sea area to become major petroleum exporters, existing petroleum transport lines, which generally head northward into Russia, will need upgrading. More importantly, new lines will need to be built to transport Caspian Sea oil to export markets, in some combination of westward to the Mediterranean,

246

1999 IEEE International Solid-State Circuits Conference 0-7803-5129-0/99 IEEE 1999 MP 4.7 Tunable, Switchable, High-Q VHF  

E-Print Network [OSTI]

· 1999 IEEE International Solid-State Circuits Conference 0-7803-5129-0/99 © IEEE 1999 MP 4 high-Q passive components, at- tempts to maximize their role with the intention of harnessing the above for the transmit local oscillator and power amplifier, as well. Due to Q limitations, conventional IC technologies

Nguyen, Clark T.-C.

247

Campus Recreation Graphic Design Internship The Campus Recreation Graphic Design Internship program is designed to enhance your  

E-Print Network [OSTI]

Campus Recreation Graphic Design Internship The Campus Recreation Graphic Design Internship program the needs of the intern/practicum students, UML Campus Recreation experiences are flexible. Positions and a positive attitude. All intern/practicum students are representatives of the Department of Campus Recreation

Massachusetts at Lowell, University of

248

STEP Intern Job Description  

Broader source: Energy.gov [DOE]

STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

249

Assessor Training International  

E-Print Network [OSTI]

NVLAP Assessor Training International Arrangements #12;Assessor Training 2009: International;Assessor Training 2009: International Arrangements 3 2009 is the 10th anniversary of the signing granted by a signatory to the ILAC Arrangement #12;Assessor Training 2009: International Arrangements 4

250

Conference Proceedings International Conference  

E-Print Network [OSTI]

Conference Proceedings 10th International Conference on Hand-Arm Vibration 7-11 June 2004 Flamingo, the entertainment capital of the world: The 10th International Hand-Arm Vibration Conference will be the second time this international conference has been hosted in the US. The first was the 2nd International Hand-Arm Vibration

Hemmers, Oliver

251

IN TODAY'S PAPER International  

E-Print Network [OSTI]

India's participation in the multi-billion-dollar International Thermonuclear Reactor project which aims

252

Internal Audit Preparation Worksheet  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Internal Audit Preparation Job Aid 11_0304 Page 1 of 5 2 Internal Audit Preparation Job Aid 11_0304 Page 1 of 5 EOTA - Business Form Document Title: Internal Audit Preparation Job Aid Document Number: F-012 Rev. 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-007, Internal Audit Process Notify of Changes: Internal Auditors Referenced Document(s): F-011 Internal Audit Report F-012 Internal Audit Preparation Job Aid 11_0304 Page 2 of 5 Revision History: Rev. Description of Change A Initial Release 11_0304 Change title from Worksheet to Job Aid and changed revision from alpha to numeric for consistency. F-012 Internal Audit Preparation Job Aid 11_0304 Page 3 of 5 Internal Audit Preparation Worksheet F-012 Internal Audit Preparation Job Aid 11_0304 Page 4 of 5

253

Performance of an Internal Combustion Engine Operating on Landfill Gas and the Effect of Syngas Addition  

Science Journals Connector (OSTI)

Performance of an Internal Combustion Engine Operating on Landfill Gas and the Effect of Syngas Addition ... The performance of a four-stroke Honda GC160E spark ignition (SI) internal combustion (IC) engine operating on landfill gas (LFG) was investigated, as well as the impact of H2 and CO (syngas) addition on emissions and engine efficiency. ... In addition, variation across both the syngas content (up to 15%) and the ratio of H2 to CO in the syngas (H2/CO = 0.5, 1, and 2) were tested. ...

McKenzie P. Kohn; Jechan Lee; Matthew L. Basinger; Marco J. Castaldi

2011-02-07T23:59:59.000Z

254

INTERNAL REPAIR OF PIPELINES  

SciTech Connect (OSTI)

The two broad categories of deposited weld metal repair and fiber-reinforced composite liner repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repair and for fiber-reinforced composite liner repair. Evaluation trials have been conducted using a modified fiber-reinforced composite liner provided by RolaTube and pipe sections without liners. All pipe section specimens failed in areas of simulated damage. Pipe sections containing fiber-reinforced composite liners failed at pressures marginally greater than the pipe sections without liners. The next step is to evaluate a liner material with a modulus of elasticity approximately 95% of the modulus of elasticity for steel. Preliminary welding parameters were developed for deposited weld metal repair in preparation of the receipt of Pacific Gas & Electric's internal pipeline welding repair system (that was designed specifically for 559 mm (22 in.) diameter pipe) and the receipt of 559 mm (22 in.) pipe sections from Panhandle Eastern. The next steps are to transfer welding parameters to the PG&E system and to pressure test repaired pipe sections to failure. A survey of pipeline operators was conducted to better understand the needs and performance requirements of the natural gas transmission industry regarding internal repair. Completed surveys contained the following principal conclusions: (1) Use of internal weld repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling (HDD) when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) Pipe diameter sizes range from 50.8 mm (2 in.) through 1,219.2 mm (48 in.). The most common size range for 80% to 90% of operators surveyed is 508 mm to 762 mm (20 in. to 30 in.), with 95% using 558.8 mm (22 in.) pipe. An evaluation of potential repair methods clearly indicates that the project should continue to focus on the development of a repair process involving the use of GMAW welding and on the development of a repair process involving the use of fiber-reinforced composite liners.

Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; Nancy Porter; Mike Sullivan; Chris Neary

2004-04-12T23:59:59.000Z

255

In Proc. of the 5th International Seminar and Workshop Engineering Design in Integrated Product Development (EDIProD 2006), 21-23 September 2006, Gronw, Poland, pp. 59-69, 2006.  

E-Print Network [OSTI]

Development (EDIProD 2006), 21-23 September 2006, Gronów, Poland, pp. 59-69, 2006. ROLES OF ONTOLOGIES Modeling, Ontology Abstract: Capturing design knowledge and its modeling are crucial issues for design, consistent, reusable and interoperable. This survey article discusses the roles of ontologies of engineering

Mizoguchi, Riichiro

256

Available at: http://publications.ictp.it IC/2010/008 United Nations Educational, Scientific and Cultural Organization  

E-Print Network [OSTI]

and Cultural Organization and International Atomic Energy Agency THE ABDUS SALAM INTERNATIONAL CENTRE, Phuthaditjhaba 9866, South Africa and The Abdus Salam International Centre for Theoretical Physics, Trieste efficiencies of completed CuInSe2/CdS/ZnO solar cell devices. In the case of traditional two-stage growth

257

Design for manufacturability Design verification  

E-Print Network [OSTI]

ITRS Design #12;Design · Design for manufacturability · Design verification #12;Design for Manufacturability · Architecture challenges · Logic and circuit challenges · Layout and physical design challenges · Expected to be the source of multiple DFM challenges · Invest in variability reduction or design

Patel, Chintan

258

MAGNETIC FIELD STRUCTURE AROUND LOW-MASS CLASS 0 PROTOSTARS: B335, L1527, AND IC348-SMM2  

SciTech Connect (OSTI)

We report new 350 {mu}m polarization observations of the thermal dust emission from the cores surrounding the low-mass, Class 0 young stellar objects L1527, IC348-SMM2, and B335. We have inferred magnetic field directions from these observations and have used them together with results in the literature to determine whether magnetically regulated core-collapse and star formation models are consistent with the observations. These models predict a pseudo-disk with its symmetry axis aligned with the core magnetic field. The models also predict a magnetic field pinch structure on a scale less than or comparable to the infall radii for these sources. In addition, if the core magnetic field aligns (or nearly aligns) the core rotation axis with the magnetic field before core collapse, then the models predict the alignment (or near alignment) of the overall pinch field structure with the bipolar outflows in these sources. We show that if one includes the distorting effects of bipolar outflows on magnetic fields, then in general the observational results for L1527 and IC348-SMM2 are consistent with these magnetically regulated models. We can say the same for B335 only if we assume that the distorting effects of the bipolar outflow on the magnetic fields within the B335 core are much greater than for L1527 and IC348-SMM2. We show that the energy densities of the outflows in all three sources are large enough to distort the magnetic fields predicted by magnetically regulated models.

Davidson, J. A. [School of Physics, University of Western Australia, 35 Stirling Hwy, Crawley, WA 6009 (Australia); Novak, G.; Matthews, T. G. [Department of Physics and Astronomy, Northwestern University, 2131 Tech Dr., Evanston, IL 60208 (United States); Matthews, B. [Herzberg Institute of Astrophysics, National Research Council of Canada, 5071 West Saanich Road, Victoria, BC, V9E 2E7 (Canada); Goldsmith, P. F.; Chapman, N. [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Dr., Ms 264-782, Pasadena, CA 91109 (United States); Volgenau, N. H. [California Institute of Technology, Owens Valley Radio Observatory, Big Pine, CA 93513 (United States); Vaillancourt, J. E. [Universities Space Research Association, SOFIA, NASA Ames Research Center, MS 211-3, Moffett Field, CA 94035-0001 (United States); Attard, M. [Laboratoire AIM, CEA/DSM-CNRS-Universite Paris Diderot, IRFU/Service d'Astrophysique, CEA Saclay, Orme des Merisiers, 91191 Gif-sur-Yvette (France)

2011-05-10T23:59:59.000Z

259

International Standards for Telecommunications  

Science Journals Connector (OSTI)

...research-article International Standards for Telecommunications M. B. Williams As soon as telegraph...surprising that the International Telecommunications Union, the forum for world-wide...and evolution of all branches of telecommunications. Increasingly, the distinction...

M. B. Williams

1978-01-01T23:59:59.000Z

260

Essays in international trade  

E-Print Network [OSTI]

This thesis is a collection of essays on the effect of trade costs on international trade. Chapter 1 derives and empirically examines how factor proportions determine the structure of commodity trade when international ...

Romalis, John

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

International aeronautical user charges  

E-Print Network [OSTI]

Introduction: 1.1 BACKGROUND AND MOTIVATION Very few issues relating to the international air transportation industry are today as divisive as those pertaining to user charges imposed at international airports and enroute ...

Odoni, Amedeo R.

1985-01-01T23:59:59.000Z

262

International Center 3201 South State Street, MTCC -Room 203 (312)-567-3680 icenter@iit.edu www.ic.iit.edu Illinois Institute of Technology  

E-Print Network [OSTI]

authorized employment. An amended petition may be necessary. · Have the department apply for renewal of your, Philippines, Poland, Portugal, Romania, Slovak Republic, Thailand, Trinidad and Tobago, Turkey, United Kingdom

Heller, Barbara

263

International Freshwater Agreements  

E-Print Network [OSTI]

Population Distribution ..................................................... 16 Population Density per, circa 1995............................................... 20 Dam Density per International River Basin ............................ 25 Africa ................................................................

Wolf, Aaron

264

International Commitments Primer | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

International Commitments International Commitments Primer International Commitments Primer Overview of International Commitment Process DOE pursues a variety of science and...

265

International Student Guide Mathematics  

E-Print Network [OSTI]

International Student Guide Mathematics www.swansea.ac.uk/maths www.swansea.ac.uk/science/international #12;Reasons to study at Swansea University Mathematics at Swansea University Established in 1920, 36th and more Over 15,000 students / Over 2,000 International students Strongest in Wales for Mathematics

Harman, Neal.A.

266

Wood Resources International  

E-Print Network [OSTI]

Wood Resources International Wood Raw Material Consumption on the Rise Despite Weak Global Economy UNECE Timber Committee Meeting October 7-8, 2003 Geneva, Switzerland Håkan Ekström Wood Resources International #12;Wood Resources International Outline · Roundwood Removals · Roundwood Consumption · Raw

267

Does merger-induced core-collapse produce gamma-ray bursts in type Ib & Ic supernovae?  

E-Print Network [OSTI]

Gamma-ray bursts, discovered over three decades ago, can appear to be a hundred times as luminous as the brightest supernovae. However, there has been evidence for some time now of an association of gamma-ray bursts with supernovae of type Ib and Ic. Here we interpret the overabundance of millisecond pulsars in globular clusters and the details of supernova 1987A to reveal the energy source, which powers at least some long-duration gamma-ray bursts, as core-collapse following the merger of two white dwarfs, either as stars or stellar cores. In order for the beams/jets associated with gamma-ray bursts to form in mergers within massive common envelopes (as with SN1987A), much of the intervening stellar material in the polar directions must be cleared out by the time of core-collapse, or the beams/jets themselves must clear their own path. The core-collapse produces supernovae of type Ib, Ic, or II (as with SN1987A, a SNa IIp), leaving a weakly magnetized neutron star remnant with a spin period near 2 milliseconds. There is no compelling reason to invoke any other model for gamma-ray bursts.

John Middleditch

2003-11-12T23:59:59.000Z

268

PREFACE THE DESIGN MANUAL  

E-Print Network [OSTI]

developed and adopted a series of documents that describe the codes, standards, details, products, and practices to be followed by Architect/Engineers (A/Es). These documents apply to all design of construction at all facilities on property owned by the Authority. Facilities constructed or modified on the site occupied by the National Air and Space Museum located at Washington Dulles International Airport are exempt from the requirements of the Authority Design Manual. The Design Manual has been developed to assist Architects/Engineers (A/Es) in understanding the practices and policies that must be incorporated into each project. The Design Manual contains a number of specific requirements that must be followed on all projects, as described above. These can be either Authority contracted projects, Authority direct-constructed projects, and tenant contracted projects. APPLICABILITY OF THE DESIGN MANUAL The requirements for design and construction incorporated into the Design Manual and Supporting Volumes are regulations approved by the Metropolitan Washington Airports Authority Board of Directors and shall be considered contract requirements for all A/Es who are performing services under contract to the Authority. Although A/Es who are under contract to tenants of the Authority may not be working under contract provisions that make compliance with these requirements mandatory, the Authority reserves the right, as Owner of all airport facilities, and land on which tenant buildings are constructed, to reject any design or work that does not comply with the requirements of the Design Manual and its

unknown authors

2010-01-01T23:59:59.000Z

269

Status of UFD Campaign International Activities in Disposal Research |  

Broader source: Energy.gov (indexed) [DOE]

Status of UFD Campaign International Activities in Disposal Status of UFD Campaign International Activities in Disposal Research Status of UFD Campaign International Activities in Disposal Research Several international organizations have made significant progress in the characterization and performance evaluation of other disposal design options and host rock characteristics (clay/shale, granite), most of which were very different from those studied in the United States. The DOE recognizes that close international collaboration is a beneficial and cost effective strategy for advancing disposal science. This report describes the active collaboration opportunities available to U.S. researchers, and presents specific cooperative research activities that have been recently initiated within DOE's disposal research program.

270

Process Tools for Interaction Design Alexander Wiethoff and Andreas Butz  

E-Print Network [OSTI]

to be applied within the user centered 17 Proceedings of the 2nd International Workshop on Open Design Spaces scenarios for international clients, many designers and researchers have investigated how these tools can the User-Centered Design (UCD) process in its individual phases, such as user research and analysis

271

S ~ C ~and Tlymmics of the Global Economy:Network sls sf International  

E-Print Network [OSTI]

a quantitative network analysis of international commodity tradejlows designed to measure the structure-economy and in the positions of particular countries in the system. Ourfindings generally conform to the theoretically of the international system. Socialnetworkanalysisprovidespowerfultoolsforformallydescribingand testing theories

White, Douglas R.

272

17.424 International Political Economy of Advanced Industrial Societies, Spring 2007  

E-Print Network [OSTI]

This graduate class is designed as a PhD-level overview of international political economy (IPE), with an emphasis on the advanced industrial countries. The syllabus is divided into three sections: international trade; ...

Singer, David Andrew

273

Performance Assessment of a Desiccant Cooling System in a CHP Application with an IC Engine  

SciTech Connect (OSTI)

Performance of a desiccant cooling system was evaluated in the context of combined heat and power (CHP). The baseline system incorporated a desiccant dehumidifier, a heat exchanger, an indirect evaporative cooler, and a direct evaporative cooler. The desiccant unit was regenerated through heat recovery from a gas-fired reciprocating internal combustion engine. The system offered sufficient sensible and latent cooling capacities for a wide range of climatic conditions, while allowing influx of outside air in excess of what is typically required for commercial buildings. Energy and water efficiencies of the desiccant cooling system were also evaluated and compared with those of a conventional system. The results of parametric assessments revealed the importance of using a heat exchanger for concurrent desiccant post cooling and regeneration air preheating. These functions resulted in enhancement of both the cooling performance and the thermal efficiency, which are essential for fuel utilization improvement. Two approaches for mixing of the return air and outside air were examined, and their impact on the system cooling performance and thermal efficiency was demonstrated. The scope of the parametric analyses also encompassed the impact of improving the indirect evaporative cooling effectiveness on the overall cooling system performance.

Jalalzadeh-Azar, A. A.; Slayzak, S.; Judkoff, R.; Schaffhauser, T.; DeBlasio, R.

2005-04-01T23:59:59.000Z

274

Design and Drafting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Email Portal (Zimbra)* Email Portal (Zimbra)* * Operations Logbook* * Project Proposal System* * ICMS * Safety and Training * ANL ESQ Training * APS Phone Directory * Resources & Information* * Internal link Design and Drafting Group The Advanced Photon Source (APS) at Argonne National Laboratory is a national synchrotron-radiation research facility funded by the U.S. Department of Energy. Using high-brilliance x-ray beams from the APS, an international community of scientists conducts forefront basic and applied research in the fields of material science, biological science, physics, chemistry, environmental, geophysical and planetary science. The AES Design and Drafting Group supports the ASD and AES divisions' continued improvement of the accelerator as well as the scientific

275

METHOD AND TOOLS TO MEET ENERGY EFFICIENCY TARGETS AT PRODUCT DESIGN STAGE  

E-Print Network [OSTI]

METHOD AND TOOLS TO MEET ENERGY EFFICIENCY TARGETS AT PRODUCT DESIGN STAGE Guillaume MOENNE Energy consumption is a key topic for electr(on)ic products, due to growing regulations & sensibility of final consumers. Developments are possible to reduce energy consumption of products during use phase

Paris-Sud XI, Université de

276

Indicator for in Use Energy Consumption (IUE): a tool enhancing Design for Energy Efficiency of  

E-Print Network [OSTI]

impact of Electric and Electronic Product and the potential of Design for Energy Efficiency in Use, it explains the increasing interest on efficient management of energy during use of electr(on)ic equipment Union can decrease by 27%. The potential for decreasing is based on the estimated wastage of energy

Boyer, Edmond

277

Design operators  

E-Print Network [OSTI]

Design operators is a thesis that investigates the nature and characteristics of the design process by examining the interaction of computation with architectural design. The effects of the introduction of these media in ...

Dritsas, Stylianos, 1978-

2004-01-01T23:59:59.000Z

278

Design and Validation of Control Room Upgrades Using a Research Simulator Facility  

SciTech Connect (OSTI)

Since 1981, the United States (U.S.) Nuclear Regulatory Commission (NRC) [1] requires a plant- specific simulator facility for use in training at U.S. nuclear power plants (NPPs). These training simulators are in near constant use for training and qualification of licensed NPP operators. In the early 1980s, the Halden Man-Machine Laboratory (HAMMLab) at the Halden Reactor Project (HRP) in Norway first built perhaps the most well known set of research simulators. The HRP offered a high- fidelity simulator facility in which the simulator is functionally linked to a specific plant but in which the human-machine interface (HMI) may differ from that found in the plant. As such, HAMMLab incorporated more advanced digital instrumentation and controls (I&C) than the plant, thereby giving it considerable interface flexibility that researchers took full advantage of when designing and validating different ways to upgrade NPP control rooms. Several U.S. partners—the U.S. NRC, the Electrical Power Research Institute (EPRI), Sandia National Laboratories, and Idaho National Laboratory (INL) – as well as international members of the HRP, have been working with HRP to run control room simulator studies. These studies, which use crews from Scandinavian plants, are used to determine crew behavior in a variety of normal and off-normal plant operations. The findings have ultimately been used to guide safety considerations at plants and to inform advanced HMI design—both for the regulator and in industry. Given the desire to use U.S. crews of licensed operators on a simulator of a U.S. NPP, there is a clear need for a research simulator facility in the U.S. There is no general-purpose reconfigurable research oriented control room simulator facility in the U.S. that can be used for a variety of studies, including the design and validation of control room upgrades.

Ronald L. Boring; Vivek Agarwal; Jeffrey C. Joe; Julius J. Persensky

2012-11-01T23:59:59.000Z

279

Integrated international safeguards concepts for fuel reprocessing  

SciTech Connect (OSTI)

This report is the fourth in a series of efforts by the Los Alamos National Laboratory and Sandia National Laboratories, Albuquerque, to identify problems and propose solutions for international safeguarding of light-water reactor spent-fuel reprocessing plants. Problem areas for international safeguards were identified in a previous Problem Statement (LA-7551-MS/SAND79-0108). Accounting concepts that could be verified internationally were presented in a subsequent study (LA-8042). Concepts for containment/surveillance were presented, conceptual designs were developed, and the effectiveness of these designs was evaluated in a companion study (SAND80-0160). The report discusses the coordination of nuclear materials accounting and containment/surveillance concepts in an effort to define an effective integrated safeguards system. The Allied-General Nuclear Services fuels reprocessing plant at Barnwell, South Carolina, was used as the reference facility.

Hakkila, E.A.; Gutmacher, R.G.; Markin, J.T.; Shipley, J.P.; Whitty, W.J.; Camp, A.L.; Cameron, C.P.; Bleck, M.E.; Ellwein, L.B.

1981-12-01T23:59:59.000Z

280

Multi-Canister overpack internal HEPA filters  

SciTech Connect (OSTI)

The rationale for locating a filter assembly inside each Multi-Canister Overpack (MCO) rather than include the filter in the Cold Vacuum Drying (CVD) process piping system was to eliminate the potential for contamination to the operators, processing equipment, and the MCO. The internal HEPA filters provide essential protection to facility workers from alpha contamination, both external skin contamination and potential internal depositions. Filters installed in the CVD process piping cannot mitigate potential contamination when breaking the process piping connections. Experience with K-Basin material has shown that even an extremely small release can result in personnel contamination and costly schedule disruptions to perform equipment and facility decontamination. Incorporating the filter function internal to the MCO rather than external is consistent with ALARA requirements of 10 CFR 835. Based on the above, the SNF Project position is to retain the internal HEPA filters in the MCO design.

SMITH, K.E.

1998-11-03T23:59:59.000Z

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

ORISE: CDC Travelers' Health Mobile App, Designed by ORISE, Gains...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Can I Eat This? Mobile App Helps International Travelers Make Safe Dining Choices CDC Travelers' Health app, designed by ORISE, gains attention on multiple websites How ORISE is...

282

REGISTRATION LIST P PR RE ES SO OL LI IC CI IT TA AT TI IO ON  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

REGISTRATION LIST REGISTRATION LIST P PR RE ES SO OL LI IC CI IT TA AT TI IO ON N C CO ON NF FE ER RE EN NC CE E August 9, 2011 Holiday Inn Capitol  550 C Street, SW  Washington, DC 20024 Page 1 of 9 Instructions: (iii) Please indicate (by checking the appropriate box) whether the organization you represent is a large business, small business, or not a business. (iv) Please indicate (by checking the appropriate box) whether your name or the name of your organization may be released on the NNSA website as an attendee of this conference. (v) Please provide an email address if you would like it to be released on the NNSA website. An email address cannot be released if you select neither in column (iv). Name Organization Name Large/Small (iii) Release Attendance? (iv) Email (to release)

283

Proceedings of the international workshop on spallation materials technology  

SciTech Connect (OSTI)

This document contains papers which were presented at the International Workshop on Spallation Materials Technology. Topics included: overviews and thermal response; operational experience; materials experience; target station and component design; particle transport and damage calculations; neutron sources; and compatibility.

Mansur, L.K.; Ullmaier, H. [comps.] [comps.

1996-10-01T23:59:59.000Z

284

Computational fluid dynamics for turbomachinery internal air systems  

Science Journals Connector (OSTI)

...modelling developments are discussed...the main gas path, which...designers and turbine aerodynamicists...1996 CFD developments for turbine blade heat...Engines and Gas Turbines...compressor gas turbine internal...on future strategies towards understanding...

2007-01-01T23:59:59.000Z

285

IBM Research CS/EE/Math Summer Intern Program  

E-Print Network [OSTI]

- Services Computing - Storage Systems - Supercomputing - User Interface Technologies - Web Electrical Processing - Verification Technology - VLSI Design Mathematical Sciences and Related Disciplines - Algorithms Accessibility Center intranet site w3.ibm.com/able IBM internal use only #12;

Pang, Alex

286

IBM Research CS/EE/Math Summer Intern Program  

E-Print Network [OSTI]

- Services Computing - Storage Systems - Supercomputing - User Interface Technologies - Web Electrical Processing - Verification Technology - VLSI Design Mathematical Sciences and Related Disciplines - Algorithms Yorktown Heights IBM internal use onlyIBM Accessibility Center intranet site w3.ibm.com/able #12;

Beimel, Amos

287

Administrative and Compliance Issues Related to International Emissions Trading  

Science Journals Connector (OSTI)

In the former chapters in this part on IET, several authors have addressed issues that are related to the design of a national trading regime, which could be extended to an international emissions trading system....

Naoki Matsuo

1999-01-01T23:59:59.000Z

288

Pipeline ADC Design Methodology.  

E-Print Network [OSTI]

??Demand for high-performance analog-to-digital converter (ADC) integrated circuits (ICs) with optimal combined specifications of resolution, sampling rate and power consumption becomes dominant due to emerging… (more)

Zhao, Hui

2012-01-01T23:59:59.000Z

289

THE INTERNATIONAL GEOLOGICAL CONGRESS  

Science Journals Connector (OSTI)

... , sections, plans, models in relief, c., to be found in the Exposition Universelle, will realise the expectations expressed in the circular of the International Committee, of an ...

T. STERRY HUNT

1878-06-06T23:59:59.000Z

290

HydroVision International  

Broader source: Energy.gov [DOE]

The HydroVision International Conference and Exhibition offers attendees countless opportunities to network, share best practices, meet with product and service providers, and more.  Held over five...

291

International petroleum statistics report  

SciTech Connect (OSTI)

This report provides information on current international petroleum production, demand, imports, and stocks. World oil demand and OECD demand data are presented for the years 1970 thru 1995.

NONE

1996-08-01T23:59:59.000Z

292

Internal Controls Evaluations  

Broader source: Energy.gov (indexed) [DOE]

assurance reviews need to be completed prior to the submission of quarterly and annual reports. Page | 6 Table 1: DOE Internal Controls Assessment Process Important Dates Date...

293

Sustainable Supply Chain Network Design: A Multicriteria Perspective Anna Nagurney  

E-Print Network [OSTI]

Sustainable Supply Chain Network Design: A Multicriteria Perspective Anna Nagurney Department West Hartford, Connecticut 06117 August 2009; revised April 2010 International Journal of Sustainable framework for the design of sustainable supply chain networks. We consider a firm that is engaged

Nagurney, Anna

294

Preliminary Safety Design RM  

Broader source: Energy.gov (indexed) [DOE]

Preliminary Safety Design Review Module Preliminary Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF Pr C CD-1 F ENVIRO Standard R reliminar Rev Critical Decis CD-2 M ONMENTAL Review Plan ry Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

295

Conceptual Safety Design RM  

Broader source: Energy.gov (indexed) [DOE]

Conceptual Safety Design Review Module Conceptual Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF C C CD-1 F ENVIRO Standard R Conceptua Rev Critical Decis CD-2 M ONMENTAL Review Plan al Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital

296

Safety Design Strategy RM  

Broader source: Energy.gov (indexed) [DOE]

Safety Design Strategy Review Module Safety Design Strategy Review Module March 2010 OFFICE OF ENVIRONMENTAL MANAGEMENT Standard Review Plan (SRP) Safety Design Strategy (SDS) Review Module Critical Decision (CD) Applicability CD-0 CD-1 CD-2 CD-3 CD-4 Post Operation March 2010 Standard Review Plan, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

297

International Programs in Agriculture  

E-Print Network [OSTI]

International Programs in Agriculture MessagefromtheDirector­ Staying Ahead of Globalization and more prosperous place for all. Fortunately, Purdue International Programs in Agriculture (IPIA) has natural disasters caution us to remember the power of nature. The United Nations Food and Agriculture

298

International for Advanced Studies  

E-Print Network [OSTI]

and Technology at the University of Ulm ICAS-Affiliations The International Center for Advanced Studies in Health in medical technology and pharma- ceutical industry. The International Advisory Panel of ICAS consists, transfer of state-of-the-art clinical technologies, and utilization of methodologies appropriate

Pfeifer, Holger

299

International Conference Water Efficiency  

E-Print Network [OSTI]

International Conference Water Efficiency in Urban Areas Concepts, Technologies, Socio Economics for PostersRegistration via Fax: +49 941 29688-17 Yes, I will participate International Conference Water of the invoice. Payment must be received no later than 14 days before the conference begins (it has to be sett

Wehrli, Bernhard

300

STUDENT HANDBOOK INTERNATIONAL  

E-Print Network [OSTI]

STUDENT HANDBOOK INTERNATIONAL 2011-12 #12;2 International Student Handbook 2011-12 Contents Volunteering 30 Sport and physical activity 31 Local transport 32 Exploring Leeds and the UK 36 Families to start a new period in your life. We hope this handbook will help you to make the most of your time

Haase, Markus

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

A coupled model for ring dynamics, gas flow, and oil flow through the ring grooves in IC engines  

E-Print Network [OSTI]

Oil flows through ring/groove interface play a critical role in oil transport among different regions the piston ring pack of internal combustion engines. This thesis work is intended to improve the understanding and ...

Jia, Ke, S. M. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

302

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

he International Energy Module determines changes in the world oil price and the supply prices of crude he International Energy Module determines changes in the world oil price and the supply prices of crude oils and petroleum products for import to the United States in response to changes in U.S. import requirements. A market clearing method is used to determine the price at which worldwide demand for oil is equal to the worldwide supply. The module determines new values for oil production and demand for regions outside the United States, along with a new world oil price that balances supply and demand in the international oil market. A detailed description of the International Energy Module is provided in the EIA publication, Model Documentation Report: The International Energy Module of the National Energy Modeling System, DOE/EIA-M071(06), (Washington, DC, February 2006).

303

rIc. IL1 Dorsalvicw ofskulls of(A) round-earcd elephant-shrew (Maloslides proboscdeus) and (B) castern rock elephant-shrew (Elephantulus myuns)  

E-Print Network [OSTI]

#12;rIc. IL1 Dorsalvicw ofskulls of(A) round-earcd elephant-shrew (Malosælides proboscídeus) and (B) castern rock elephant-shrew (Elephantulus myuns) view that is not generally accepted today (Corbet & Hanks the most primitive of all our elephant- shrews. Its earþ fossil history is unknown. Three specils

304

Jade Sky Technologies Partners with CLTC on LED Replacement Lamp Upgrade Project UC Davis' California Lighting Technology Center will utilize Jade Sky Technologies' driver ICs to help spur  

E-Print Network [OSTI]

Jade Sky Technologies Partners with CLTC on LED Replacement Lamp Upgrade Project UC Davis of cost-effective, easy-to-use LED lighting solutions Milpitas, Calif. ­ October 15, 2013 ­ Jade Sky Technologies (JST), a clean-tech start-up manufacturer of driver ICs for LED lighting applications, announces

California at Davis, University of

305

Renewable Energy Resources Inc formerly Internal Hydro International Inc |  

Open Energy Info (EERE)

Internal Hydro International Inc Internal Hydro International Inc Jump to: navigation, search Name Renewable Energy Resources Inc (formerly Internal Hydro International Inc) Place Tampa, Florida Zip 33603 Sector Hydro Product Internal Hydro's technology takes waste, pumped pressures of fluids, gases or the constantly available natural flows of water and extracts power from them via a turbine. References Renewable Energy Resources Inc (formerly Internal Hydro International Inc)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Renewable Energy Resources Inc (formerly Internal Hydro International Inc) is a company located in Tampa, Florida . References ↑ "Renewable Energy Resources Inc (formerly Internal Hydro

306

A tool to create hydrodynamically optimized hull-forms with geometrical constraints from internal arrangements  

E-Print Network [OSTI]

Internal arrangements and bulky equipment like machinery have been treated for many years as a secondary aspect of the ship design. Traditionally, in the design process, the centerpiece of the effort is the hull and its ...

Nestoras, Konstantinos, Nav.E. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

307

Design Competitions  

Broader source: Energy.gov [DOE]

National design competitions heighten awareness and market adoption of high-performance solid-state lighting products.

308

The Reference Design for the ILC, Costs, and What's Next  

SciTech Connect (OSTI)

A Reference Design for the International Linear Collider was recently released. The scale of the ILC is such that it must be built by an international collaboration and the design is the culmination of a unique global effort. Through ICFA, a decision was made to base the design on superconducting RF technology and then the Global Design Effort (GDE) was created to coordinate the actual accelerator design toward a construction proposal. The reference design establishes all the features of the machine, and defines both the R&D program and engineering design that will now follow over the next few years.

Barish, Barry

2007-03-26T23:59:59.000Z

309

Beamline Safety Design Review Steering Committee Charter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Meeting Minutes internal link Meeting Minutes internal link Reviews internal link Beamline Safety Design Review Steering Committee (BSDRSC) 1. Purpose The Beamline Safety Design Review Steering Committee (BSDRSC) oversees the review of all safety aspects related to beamline and critical component design, regardless of who generated the design, and includes facility operational issues when reviewing non-APS generated designs. 2. Membership Members appointed by the APS Division Directors will be comprised of a pre-selected standing committee with membership chosen by function. The following functions will be included: AES User Technical Interface (Committee Chair) AES Technical Operations Specialist APS Electrical / Electronics Technical Representative AES QA Engineering Specialist APS Radiation Safety Shielding Committee Chair

310

International Energy Statistics  

Gasoline and Diesel Fuel Update (EIA)

> Countries > International Energy Statistics > Countries > International Energy Statistics International Energy Statistics Petroleum Production| Annual Monthly/Quarterly Consumption | Annual Monthly/Quarterly Capacity | Bunker Fuels | Stocks | Annual Monthly/Quarterly Reserves | Imports | Annual Monthly/Quarterly Exports | CO2 Emissions | Heat Content Natural Gas All Flows | Production | Consumption | Reserves | Imports | Exports | Carbon Dioxide Emissions | Heat Content Coal All Flows | Production | Consumption | Reserves | Imports | Exports | Carbon Dioxide Emissions | Heat Content Electricity Generation | Consumption | Capacity | Imports | Net Imports | Exports | Distribution Losses | Heat Content Renewables Electricity Generation| Electricity Consumption | Biofuels Production | Biofuels Consumption | Heat Content Total Energy

311

International petroleum statistics report  

SciTech Connect (OSTI)

The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report presents data on international oil production, demand, imports, exports and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world, in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

NONE

1995-10-01T23:59:59.000Z

312

A CAD-Oriented Modeling Approach of Frequency-Dependent Behavior of Substrate Noise Coupling for Mixed-Signal IC Design  

E-Print Network [OSTI]

applications using epitaxial layers on a highly doped substrate. Using the proposed modeling approach, circuit-dependent parameters are usually not compatible with standard circuit simulators. It is therefore preferable to have a CAD-oriented equivalent circuit model consisting of only ideal lumped circuit elements, which can

Dutton, Robert W.

313

SP 800-82. Guide to Industrial Control Systems (ICS) Security: Supervisory Control and Data Acquisition (SCADA) systems, Distributed Control Systems (DCS), and other control system configurations such as Programmable Logic Controllers (PLC)  

Science Journals Connector (OSTI)

The purpose of this document is to provide guidance for securing industrial control systems (ICS), including supervisory control and data acquisition (SCADA) systems, distributed control systems (DCS), and other systems performing control functions. ... Keywords: Cyber-physcial systems, ICS, Industrial Control Systems, SCADA, Supervisory Control and Data Acquisition, security controls, threats, vulnerabilities

Keith A. Stouffer; Joseph A. Falco; Karen A. Scarfone

2011-06-01T23:59:59.000Z

314

NUCLEAR ISLANDS International Leasing  

Broader source: Energy.gov (indexed) [DOE]

ISLANDS ISLANDS International Leasing of Nuclear Fuel Cycle Sites to Provide Enduring Assurance of Peaceful Use Christopher E. Paine and Thomas B. Cochran Current International Atomic Energy Agency safeguards do not provide adequate protection against the diversion to military use of materials or technology from certain types of sensitive nuclear fuel cycle facilities. In view of highly enriched uranium's relatively greater ease of use as a nuclear explosive material than plutonium and the significant diseconomies of commercial spent fuel reprocessing, this article focuses on the need for improved international controls over uranium enrichment facilities as the proximate justification for creation of an International Nuclear Fuel Cycle Association (INFCA). In principle, the proposal is equally applicable to alleviating the proliferation concerns provoked by nuclear fuel

315

International Summer School2014  

E-Print Network [OSTI]

International Summer Camp 11 Session 3 Intensive Training on Chinese Language 15 About Dalian 19 #12;#12;About a century, and having gone through the persistent efforts of several generations, DUT has developed

Haviland, David

316

International Energy Agency  

Broader source: Energy.gov [DOE]

The International Energy Agency (IEA) provides a mechanism for member countries to task- and cost-share research activities through two agreements—one supporting hydrogen activities and another...

317

International petroleum statistics report  

SciTech Connect (OSTI)

This report presents data on international oil production, demand, imports, exports, and stocks. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

NONE

1996-03-01T23:59:59.000Z

318

International petroleum statistics report  

SciTech Connect (OSTI)

This report presents data on international oil production, demand, imports, and stocks. World oil production and OECD demand data are for the years 1970 through 1995; stocks from 1973 through 1995, and trade from 1985 through 1995.

NONE

1996-12-01T23:59:59.000Z

319

CCPPolicyBriefing International  

E-Print Network [OSTI]

: +44 (0)1603 593715 A: UEA, Norwich, NR4 7TJ Modelling international wind energy diffusion: www.uea.ac.uk/ccp T: +44 (0)1603 593715 A: UEA, Norwich, NR4 7TJ

Feigon, Brooke

320

Internal Dose Estimates from  

E-Print Network [OSTI]

Appendix F Internal Dose Estimates from NTS Fallout F-1 #12;Radiation Dose to the Population;TABLE OF CONTENTS Page F- Part I. Estimates of Dose...........................................................................................40 Comparison to dose estimates from global fallout

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

INTERNATIONAL ENERGY AND ENVIRONMENT  

E-Print Network [OSTI]

in a heat pump cooling system, thereby alleviating peak electricity consumption and associated emissions substituting for banned fluorocarbon refrigerants, coping with carbon costing and reducing water consumptionINTERNATIONAL ENERGY AND ENVIRONMENT FOUNDATION Computational Fluid Dynamics Modeling

322

International Workshop SMART MATERIALS, STRUCTURES & NDT in AEROSPACE  

E-Print Network [OSTI]

International Workshop SMART MATERIALS, STRUCTURES & NDT in AEROSPACE Conference NDT in Canada 2011 FRACTIONAL CONTROLLER FOR THE VIBRATION SUPPRESSION OF A SMART BEAM Cem ONAT1 , Melin SAHIN 2 , Yavuz YAMAN3 controller is designed for the suppression of the flexural vibrations of a smart beam. The designed

Yaman, Yavuz

323

international | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

International Activity in Gasification and Coal to Liquids Development News Gasifipedia Coal-Biomass Feed Advanced Fuels Synthesis Systems Analyses International Activity Project...

324

SRI International | Open Energy Information  

Open Energy Info (EERE)

SRI International Jump to: navigation, search Name: SRI International Region: United States Sector: Marine and Hydrokinetic Website: http:www.sri.com This company is listed in...

325

Greenlife International | Open Energy Information  

Open Energy Info (EERE)

Francisco, California Zip: 94111 Product: GreenLife International is a biodiesel manufacturer and equipment saler References: Greenlife International1 This article is a stub....

326

Opel International Inc | Open Energy Information  

Open Energy Info (EERE)

Opel International Inc Opel International Inc Jump to: navigation, search Name Opel International Inc Place Shelton, Connecticut Zip 64884 Product Opel has designed and plans to manufacture high-concentration and low-concentration PV products. Coordinates 47.212485°, -123.105654° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.212485,"lon":-123.105654,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

327

SWAT Goes International  

E-Print Network [OSTI]

#1; tx H2O | pg. 18 International researchers and program managers in 90 countries around the world use the Soil and Water Assessment Tool (SWAT) model. Germany, the first country interested in SWAT, uses it to model its large watersheds, said... Laboratory. To answer this expanding interest worldwide, the research team organized the first international SWAT conference in 2001 in Germany with 35 participants from 16 countries and five continents presenting 20 papers. ?This conference gave us a...

Wythe, Kathy

2007-01-01T23:59:59.000Z

328

International petroleum statistics report  

SciTech Connect (OSTI)

This monthly publication provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

Not Available

1994-05-01T23:59:59.000Z

329

International Energy Agency  

Broader source: Energy.gov [DOE]

DOE's market transformation efforts have reached to European and other countries who are part of the international distributed and decentralized energy community. Through its partnership with DOE, the combined heat and power (CHP) program of the International Energy Agency (IEA) conducts research and analysis of CHP markets and deployment efforts around the world and has used lessons learned from U.S. research, development, and deployment efforts to recommend market transformation activities and policies that will lead to new CHP installations worldwide.

330

International Energy Agency  

SciTech Connect (OSTI)

The growing need for international cooperation in energy led to the establishment of the International Energy Agency (IEA) in 1974 as a forum for the 21 participating countries to coordinate their energy planning. The IEA provides a framework within the cooperating efforts of its participating countries which reinforce one another and improve the overall energy situation. This brief report reviews the objectives of the IEA and the activities of the Advisory Council.

Taylor, N.R.

1983-01-01T23:59:59.000Z

331

International Journal of Systems Biology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

|| Bioinfo Publications || 57 || Bioinfo Publications || 57 International Journal of Systems Biology ISSN: 0975-2900 & E-ISSN: 0975-9204, Volume 4, Issue 1, 2013, pp.-57-72. Available online at http://www.bioinfopublication.org/jouarchive.php?opt=&jouid=BPJ0000252 IWATA M. 1 , SHIRAISHI F. 1 AND VOIT E.O. 2 * 1 Section of Bio-process design, Department of Bioscience and Biotechnology, Graduate School of Bioresource and Bioenvironmental Sciences, Kyushu University, 6-10-1, Hakozaki, Higashi-Ku, Fukuoka 820-8581, Japan. 2 The Wallace H. Coulter, Department of Biomedical Engineering at Georgia Institute of Technology and Emory University, 313 Ferst Drive, Suite 4103, Atlanta, GA 30332-0535, U.S.A. *Corresponding Author: Email- eberhard.voit@bme.gatech.edu Received: August 05, 2013; Accepted: September 03, 2013

332

International Oil Supplies and Demands  

SciTech Connect (OSTI)

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Not Available

1991-09-01T23:59:59.000Z

333

The OLYMPUS Internal Hydrogen Target  

E-Print Network [OSTI]

An internal hydrogen target system was developed for the OLYMPUS experiment at DESY, in Hamburg, Germany. The target consisted of a long, thin-walled, tubular cell within an aluminum scattering chamber. Hydrogen entered at the center of the cell and exited through the ends, where it was removed from the beamline by a multistage pumping system. A cryogenic coldhead cooled the target cell to counteract heating from the beam and increase the density of hydrogen in the target. A fixed collimator protected the cell from synchrotron radiation and the beam halo. A series of wakefield suppressors reduced heating from beam wakefields. The target system was installed within the DORIS storage ring and was successfully operated during the course of the OLYMPUS experiment in 2012. Information on the design, fabrication, and performance of the target system is reported.

Bernauer, J C; Ciullo, G; Henderson, B S; Ihloff, E; Kelsey, J; Lenisa, P; Milner, R; Schmidt, A; Statera, M

2014-01-01T23:59:59.000Z

334

The OLYMPUS Internal Hydrogen Target  

E-Print Network [OSTI]

An internal hydrogen target system was developed for the OLYMPUS experiment at DESY, in Hamburg, Germany. The target consisted of a long, thin-walled, tubular cell within an aluminum scattering chamber. Hydrogen entered at the center of the cell and exited through the ends, where it was removed from the beamline by a multistage pumping system. A cryogenic coldhead cooled the target cell to counteract heating from the beam and increase the density of hydrogen in the target. A fixed collimator protected the cell from synchrotron radiation and the beam halo. A series of wakefield suppressors reduced heating from beam wakefields. The target system was installed within the DORIS storage ring and was successfully operated during the course of the OLYMPUS experiment in 2012. Information on the design, fabrication, and performance of the target system is reported.

J. C. Bernauer; V. Carassiti; G. Ciullo; B. S. Henderson; E. Ihloff; J. Kelsey; P. Lenisa; R. Milner; A. Schmidt; M. Statera

2014-04-02T23:59:59.000Z

335

International Oil Supplies and Demands  

SciTech Connect (OSTI)

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world's dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group's thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Not Available

1992-04-01T23:59:59.000Z

336

BNL | Nonlinear ICS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in the laser field, wherein the electron's transverse velocity is comparable to the speed of light, c. This condition is described by the laser's strength parameter ...

337

Conceptual Design RM  

Broader source: Energy.gov (indexed) [DOE]

Conceptual Design Review Module Conceptual Design Review Module March 2010 CD-0 O 0 OFFICE OF C CD-1 F ENVIRO Standard R Concep Rev Critical Decis CD-2 M ONMENTAL Review Plan ptual De view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) sign e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

338

Prelminary Design RM  

Broader source: Energy.gov (indexed) [DOE]

Preliminary Design Review Module Preliminary Design Review Module March 2010 CD-0 O 0 OFFICE OF C CD-1 F ENVIRO Standard R Prelim Rev Critical Decis CD-2 M ONMENTAL Review Plan inary De view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) esign e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

339

Electronic governor for an internal combustion engine  

SciTech Connect (OSTI)

An electronic governor for an internal combustion engine provided with a fuel injection pump for supplying fuel to the engine and having a control rack for adjusting fuel injection amount is described comprising, means providing a designated speed signal Vno indicative of the desired rotational speed No of the internal combustion engine, a speed detector detecting the rotational speed N of the internal combustion engine and producing the speed detection signal Vn indicative of the rotational speed N, a rack position detector detecting the position of the rack and producing a rack position detection signal VL indicative of the position of the rack, a speed deviation operation circuit responsive to the speed detection signal Vn for producing a constant speed control signal Vnd for effecting control to maintain the deviation of the actual rotational speed N from the designated rotational speed No within a permissible range, a rack position deviation operation circuit for producing a maximum rack position control signal VLd for effecting control to maintain the deviation of the rack position, a control mode selector and means responsive to the output of the control mode selector for controlling the rack to cause the deviation of the actual rotational speed N from the designated rotational speed No or the rack position from the maximum rack position to be within a certain range.

Nanjyo, H.; Suzuki, H.

1987-11-24T23:59:59.000Z

340

Fe K Emission and Absorption in the XMM-EPIC Spectrum of the Seyfert Galaxy IC 4329a  

E-Print Network [OSTI]

We present a detailed analysis of the XMM-Newton long-look of the Seyfert galaxy IC 4329a. The Fe K bandpass is dominated by two resolved peaks at 6.4 keV and 7.0 keV, consistent with neutral or near-neutral Fe K alpha and K beta emission. There is a prominent redward asymmetry in the 6.4 keV line, which could indicate emission from a Compton shoulder. Alternatively, models using dual relativistic disklines are found to describe the emission profile well. A low-inclination, moderately-relativistic dual-diskline model is possible if the contribution from narrow components, due to distant material, is small or absent. A high-inclination, moderately relativistic profile for each peak is possible if there are roughly equal contributions from both the broad and narrow components. Combining the XMM-Newton data with RXTE monitoring data, we explore the time-resolved spectral behavior on time scales from hours to 2 years. We find no strong evidence for variability of the Fe K line flux on any time scale, likely due to the minimal level of continuum variability. We detect, at high significance, a narrow absorption line at 7.68 keV. This feature is most likely due to Fe XXVI K alpha absorption blueshifted to about 0.1c relative to the systemic velocity, suggesting a high-velocity, highly-ionized outflow component. As is often the case with similar outflows seen in high-luminosity quasars, the power associated with the outflow represents a substantial portion of the total energy budget of the AGN. The outflow could arise from a radiatively-driven disk wind, or it may be in the form of a discrete, transient blob of ejected material.

A. Markowitz; J. Reeves; V. Braito

2006-04-17T23:59:59.000Z

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Assessor Training Internal Audits and  

E-Print Network [OSTI]

NVLAP Assessor Training Internal Audits and Management Reviews #12;Assessor Training 2009, quarterly, etc., schedule throughout the year #12;Assessor Training 2009: Internal Audits and Management a copy of the full internal audit schedule. #12;Assessor Training 2009: Internal Audits and Management

342

Charles Darwin University 1 INTERNATIONAL  

E-Print Network [OSTI]

in Australia; to safeguard Australia's international reputation as a provider of high quality education

343

International Energy Outlook - Preface  

Gasoline and Diesel Fuel Update (EIA)

Preface Preface International Energy Outlook 2004 Preface This report presents international energy projections through 2025, prepared by the Energy Information Administration, including outlooks for major energy fuels and issues related to electricity and the environment. The International Energy Outlook 2004 (IEO2004) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets through 2025. U.S. projections appearing in IEO2004 are consistent with those published in EIAÂ’s Annual Energy Outlook 2004 (AEO2004), which was prepared using the National Energy Modeling System (NEMS). IEO2004 is provided as a service to energy managers and analysts, both in government and in the private sector. The projections are used by international agencies, Federal and State governments, trade associations, and other planners and decisionmakers. They are published pursuant to the Department of Energy Organization Act of 1977 (Public Law 95-91), Section 205(c). The IEO2004 projections are based on U.S. and foreign government laws in effect on October 1, 2003.

344

International Activities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

International Activities International Activities International Activities International Activities The International Program assists the DOE Office of Environmental Management (EM) in identifying technologies and strategies for waste processing, groundwater and soil remediation, spent nuclear fuel and surplus nuclear material disposition, and facility deactivation and decommissioning. The International Program seeks to transform advances in science and engineering into practical solutions for environmental remediation. Collaboration with governmental, academic, and industrial organizations in other countries expands the technical depth of the EM program. Working with the international community offers the opportunity to develop consensus on approaches to science, technology and policy for environmental

345

Faculty of Design Architecture and Building: Selection Criteria for Undergraduate 2013 Universities  

E-Print Network [OSTI]

Faculty of Design Architecture and Building: Selection Criteria for Undergraduate 2013 Universities in International Studies 609260 B Design in Integrated Product Design 602050 B Design in Integrated Product Design Admissions Centre (UAC) Courses ­ Design Selection criteria applying to the following courses are outlined

University of Technology, Sydney

346

Internal Audit Preparation Worksheet  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 Design Document 10_0630 Page 1 of 6 4 Design Document 10_0630 Page 1 of 6 EOTA - Business Form Document Title: Design Document Document Number: ISDF-004 Rev. 10_0630 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-001, Course Design Process Notify of Changes: ADM, ISD, QAM, ITT, MGT Referenced Document(s): ISDF-001 Technical Direction, ISDF-046 Training Design/Development Summary ISDF-004 Design Document 10_0630 Page 2 of 6 Revision History: Rev. Description of Change A Initial Release 08_0709 Added Quality Assurance Manager Review section to form. 10_0630 Modified document to fit within TPP. Course Title ISDF-004 Design Document 10_0630 Page 3 of 6 Emergency Operations Training Academy

347

Design Specifications  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Design Design Specifications Services Overview ECS Audio/Video Conferencing Fasterdata IPv6 Network Network Performance Tools (perfSONAR) ESnet OID Registry PGP Key Service Virtual Circuits (OSCARS) OSCARS Case Study Documentation User Manual FAQ Design Specifications Functional Specifications Notifications Publications Authorization Policy Default Attributes Message Security Clients For Developers Interfaces Links Hardware Requirements DOE Grids Service Transition Contact Us Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Design Specifications OSCARS Reservation Manager - Design Specifications Year 3 Update (DRAFT) David Robertson, Chin Guok

348

Evaluation of efficiency of a driving system on the basis of energetic and ecological characteristics of an IC engine and hydrostatic transmission for the spectrum of load  

Science Journals Connector (OSTI)

The following paper presents the general model of a driving system: IC engine - hydrostatic transmission - load of a vehicle, in the form of area with specified spectrum of variables: torque and velocity. This model allows the analysis of efficiency of hydrostatic driving system and points of work of an IC engine in the field of load characteristics. Mathematical models of the components of the driving system, for the analysed case, are the results of the experimental examination. The concepts of global efficiency and ecological indexes originally introduced are suitable to compare the quality of driving systems working in statistically the same load conditions. It allows the evaluation of the value of those parameters in the whole functioning life of a machine.

Henryk Chrostowski; Waldemar Sradomski

2005-01-01T23:59:59.000Z

349

International Energy Outlook 2000  

Gasoline and Diesel Fuel Update (EIA)

0 0 Notes: Today, the Energy Information Administration (EIA) releases its mid-term projections of international energy use and carbon emissions, published in the International Energy Outlook 2000 (IEO2000). The IEO2000 report provides an assessment of world energy markets with projections of regional energy consumption, energy consumption by primary fuel, electricity consumption, carbon emissions, nuclear generating capacity, international coal trade flows, and energy use in the transportation sector. World oil production projections are also included in the report. The report is an extension of EIA's Annual Energy Outlook (AEO), and the U.S. projections that appear in the IEO are consistent with those published in the AEO. World energy consumption in this year's IEO2000 is projected to

350

International Energy Outlook 1999  

Gasoline and Diesel Fuel Update (EIA)

ieo99cvr.gif (8385 bytes) ieo99cvr.gif (8385 bytes) Preface This report presents international energy projections through 2020, prepared by the Energy Information Administration. The outlooks for major energy fuels are discussed, along with electricity, transportation, and environmental issues. The International Energy Outlook 1999 (IEO99) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets through 2020. The report is an extension of EIAÂ’s Annual Energy Outlook 1999 (AEO99), which was prepared using the National Energy Modeling System (NEMS). U.S. projections appearing in IEO99 are consistent with those published in AEO99. IEO99 is provided as a statistical service to energy managers and analysts, both in government and in the private

351

International Energy Outlook 2000  

Gasoline and Diesel Fuel Update (EIA)

2000 2000 with projections to 2020 March 16, 2000 Jay E. Hakes Energy Information Administration Next slide Back to first slide View graphic version Notes: Today, the Energy Information Administration (EIA) releases its mid-term projections of international energy use and carbon emissions, published in the International Energy Outlook 2000 (IEO2000). The IEO2000 report provides an assessment of world energy markets with projections of regional energy consumption, energy consumption by primary fuel, electricity consumption, carbon emissions, nuclear generating capacity, international coal trade flows, and energy use in the transportation sector. World oil production projections are also included in the report. The report is an extension of EIA's Annual Energy Outlook (AEO),

352

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 23 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 International Energy Module The NEMS International Energy Module (IEM) simulates the interaction between U.S. and global petroleum markets. It uses assumptions of economic growth and expectations of future U.S. and world crude-like liquids production and consumption to estimate the effects of changes in U.S. liquid fuels markets on the international petroleum market. For each year of the forecast, the NEMS IEM computes world oil prices, provides a supply curve of world crude-like liquids, generates a worldwide oil supply- demand balance with regional detail, and computes quantities of crude oil and light and heavy petroleum products imported into

353

international | OpenEI  

Open Energy Info (EERE)

international international Dataset Summary Description These estimates are derived from the best available solar resource datasets available to NREL by country. These vary in spatial resolution from 1 km to 1 degree (approximately 100 km) depending on the data source. High spatial resolution datasets (1 km to 40 km cells) were modeled to support country or regional projects. Where high resolution datasets were not available, data from NASA's Surface Meteorology and Solar Energy (SSE) version 6 database were used. The data represents total potential solar energy per year as a function of land area per solar class (KWh/m²/day). Source National Renewable Energy Laboratory Date Released Unknown Date Updated Unknown Keywords capacity clean energy energy international

354

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 International Energy Module The NEMS International Energy Module (IEM) simulates the interaction between U.S. and global petroleum markets. It uses assumptions of economic growth and expectations of future U.S. and world crude-like liquids production and consumption to estimate the effects of changes in U.S. liquid fuels markets on the international petroleum market. For each year of the forecast, the NEMS IEM computes oil prices, provides a supply curve of world crude-like liquids, generates a worldwide oil supply- demand balance with regional detail, and computes quantities of crude oil and light and heavy petroleum products imported into the United States by export region. Changes in the oil price (WTI), which is defined as the price of light, low-sulfur crude oil delivered to Cushing, Oklahoma in

355

International energy outlook 1994  

SciTech Connect (OSTI)

The International Energy Outlook 1994 (IEO94) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets between 1990 and 2010. The report is provided as a statistical service to assist energy managers and analysts, both in government and in the private sector. These forecasts are used by international agencies, Federal and State governments, trade associations, and other planners and decisionmakers. They are published pursuant to the Depart. of Energy Organization Act of 1977 (Public Law 95-91), Section 205(c). The IEO94 projections are based on US and foreign government policies in effect on October 1, 1993-which means that provisions of the Climate Change Action Plan unveiled by the Administration in mid-October are not reflected by the US projections.

Not Available

1994-07-01T23:59:59.000Z

356

Governance of the International Linear Collider Project  

SciTech Connect (OSTI)

Governance models for the International Linear Collider Project are examined in the light of experience from similar international projects around the world. Recommendations for one path which could be followed to realize the ILC successfully are outlined. The International Linear Collider (ILC) is a unique endeavour in particle physics; fully international from the outset, it has no 'host laboratory' to provide infrastructure and support. The realization of this project therefore presents unique challenges, in scientific, technical and political arenas. This document outlines the main questions that need to be answered if the ILC is to become a reality. It describes the methodology used to harness the wisdom displayed and lessons learned from current and previous large international projects. From this basis, it suggests both general principles and outlines a specific model to realize the ILC. It recognizes that there is no unique model for such a laboratory and that there are often several solutions to a particular problem. Nevertheless it proposes concrete solutions that the authors believe are currently the best choices in order to stimulate discussion and catalyze proposals as to how to bring the ILC project to fruition. The ILC Laboratory would be set up by international treaty and be governed by a strong Council to whom a Director General and an associated Directorate would report. Council would empower the Director General to give strong management to the project. It would take its decisions in a timely manner, giving appropriate weight to the financial contributions of the member states. The ILC Laboratory would be set up for a fixed term, capable of extension by agreement of all the partners. The construction of the machine would be based on a Work Breakdown Structure and value engineering and would have a common cash fund sufficiently large to allow the management flexibility to optimize the project's construction. Appropriate contingency, clearly apportioned at both a national and global level, is essential if the project is to be realised. Finally, models for running costs and decommissioning at the conclusion of the ILC project are proposed. This document represents an interim report of the bodies and individuals studying these questions inside the structure set up and supervised by the International Committee for Future Accelerators (ICFA). It represents a request for comment to the international community in all relevant disciplines, scientific, technical and most importantly, political. Many areas require further study and some, in particular the site selection process, have not yet progressed sufficiently to be addressed in detail in this document. Discussion raised by this document will be vital in framing the final proposals due to be published in 2012 in the Technical Design Report being prepared by the Global Design Effort of the ILC.

Foster, B.; /Oxford U.; Barish, B.; /Caltech; Delahaye, J.P.; /CERN; Dosselli, U.; /INFN, Padua; Elsen, E.; /DESY; Harrison, M.; /Brookhaven; Mnich, J.; /DESY; Paterson, J.M.; /SLAC; Richard, F.; /Orsay, LAL; Stapnes, S.; /CERN; Suzuki, A.; /KEK, Tsukuba; Wormser, G.; /Orsay, LAL; Yamada, S.; /KEK, Tsukuba

2012-05-31T23:59:59.000Z

357

International petroleum statistics report  

SciTech Connect (OSTI)

This document is a monthly publication that provides current international oil data. The Report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production and oil stocks, demand and trade in OECD countries.

Not Available

1994-12-01T23:59:59.000Z

358

INTERNAL REPAIR OF PIPELINES  

SciTech Connect (OSTI)

The two broad categories of deposited weld metal repair and fiber-reinforced composite repair technologies were reviewed for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Preliminary test programs were developed for both deposited weld metal repairs and for fiber-reinforced composite repair. To date, all of the experimental work pertaining to the evaluation of potential repair methods has focused on fiber-reinforced composite repairs. Hydrostatic testing was also conducted on four pipeline sections with simulated corrosion damage: two with composite liners and two without.

Robin Gordon; Bill Bruce; Nancy Porter; Mike Sullivan; Chris Neary

2003-05-01T23:59:59.000Z

359

The dark haloes of early-type galaxies in low-density environments: XMM-Newton and Chandra observations of NGC 57, NGC 7796 and IC 1531  

E-Print Network [OSTI]

We present analysis of Chandra and XMM-Newton observations of three early-type galaxies, NGC 57, NGC 7796 and IC 1531. All three are found in very low density environments, and appear to have no neighbours of comparable size. NGC 57 has a halo of kT~0.9 keV, solar metallicity gas, while NGC 7796 and IC 1531 both have ~0.55 keV, 0.5-0.6 Zsol haloes. IC 1531 has a relatively compact halo, and we consider it likely that gas has been removed from the system by the effects of AGN heating. For NGC 57 and NGC 7796 we estimate mass, entropy and cooling time profiles and find that NGC 57 has a fairly massive dark halo with a mass-to-light ratio of 44.7 (4.0,-8.5) Msol/Lsol (1 sigma uncertainties) at 4.75 Re. This is very similar to the mass-to-light ratio found for NGC 4555 and confirms that isolated ellipticals can possess sizable dark matter haloes. We find a significantly lower mass-to-light ratio for NGC 7796, 10.6 (+2.5,-2.3) Msol/Lsol at 5 Re, and discuss the possibility that NGC 7796 hosts a galactic wind, causing us to underestimate its mass.

E. O'Sullivan; A. J. R. Sanderson; T. J. Ponman

2007-07-12T23:59:59.000Z

360

Internal Audit Preparation Worksheet  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

9 Design/Development Review Checklist 10_0630 Page 1 of 3 9 Design/Development Review Checklist 10_0630 Page 1 of 3 EOTA - Business Form Document Title: Design/Development Review Checklist Document Number: ISDF-009 Rev. 10_0630 Document Owner: Vickie Pleau Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-002, Training Production Process Notify of Changes: QAM, ITT, ISD, MGT Referenced Document(s): N/A ISDF-009 Design/Development Review Checklist 10_0630 Page 2 of 3 Revision History: Rev. Description of Change A Initial Release 08_0728 Form modified to include External Document References. 10_0630 Form modified to fit with the TPP. ISDF-009 Design/Development Review Checklist 10_0630 Page 3 of 3 Design/Development Review Checklist Course/Project Name: Course #: Project Lead: Date of Review:

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Disilane Internal Rotation  

Science Journals Connector (OSTI)

Disilane Internal Rotation ... Energetics of hindered rotation in disilane are analyzed and compared to ethane. ... In disilane weakened (rotationally governed) hyperconjugative interactions, paramount in controlling the ethane barrier, leave the nonrotational part of the torsional coordinate as the primary contribution to disilane barrier energetics. ...

Vojislava Pophristic; Lionel Goodman; Cheryl T. Wu

2001-07-17T23:59:59.000Z

362

Telecommunications International Cell Phone  

E-Print Network [OSTI]

Telecommunications International Cell Phone 1. Fax completed form to 979.847.1111. 2. If you do will be charged. Date Cell Phone Needed Cell Phone Pick-Up Date Cell Phone User Travel Destination(s) United States Number Destination Country Number Cell Phone Type Digital Satellite Cell Phone Return Date Notes

363

International petroleum statistics report  

SciTech Connect (OSTI)

The International Petroleum Statistics Report is a monthly publication that provides current international oil data. This report is published for the use of Members of Congress, Federal agencies, State agencies, industry, and the general public. Publication of this report is in keeping with responsibilities given the Energy Information Administration in Public Law 95-91. The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

NONE

1997-05-01T23:59:59.000Z

364

International energy outlook 1996  

SciTech Connect (OSTI)

This International Energy Outlook presents historical data from 1970 to 1993 and EIA`s projections of energy consumption and carbon emissions through 2015 for 6 country groups. Prospects for individual fuels are discussed. Summary tables of the IEO96 world energy consumption, oil production, and carbon emissions projections are provided in Appendix A. The reference case projections of total foreign energy consumption and of natural gas, coal, and renewable energy were prepared using EIA`s World Energy Projection System (WEPS) model. Reference case projections of foreign oil production and consumption were prepared using the International Energy Module of the National Energy Modeling System (NEMS). Nuclear consumption projections were derived from the International Nuclear Model, PC Version (PC-INM). Alternatively, nuclear capacity projections were developed using two methods: the lower reference case projections were based on analysts` knowledge of the nuclear programs in different countries; the upper reference case was generated by the World Integrated Nuclear Evaluation System (WINES)--a demand-driven model. In addition, the NEMS Coal Export Submodule (CES) was used to derive flows in international coal trade. As noted above, foreign projections of electricity demand are now projected as part of the WEPS. 64 figs., 62 tabs.

NONE

1996-05-01T23:59:59.000Z

365

Internal Control Program  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To ensure sound internal controls and overall consistency in exercising the statutory authorities that vest in the Secretary, the Administrator, National Nuclear Security Administration (NNSA), and Department's Chief Financial Officer (CFO), and to implement the Federal Managers' Financial Integrity Act of 1982 and related central agency guidance. Cancels DOE O 413.1A.

2008-10-28T23:59:59.000Z

366

Internal Dose Estimates from  

E-Print Network [OSTI]

Appendix H Internal Dose Estimates from Global Fallout H-1 #12;Radiation Dose to the Population. 263-MQ-008090 September 30, 2000 H-2 #12;Radiation Dose to the Population of the Continental United Site Part I. Estimates of Dose Lynn R. Anspaugh Lynn R. Anspaugh, Consulting Salt Lake City, UT Report

367

INTERNATIONAL COUNCIL FOR SCIENCE  

E-Print Network [OSTI]

of the African Climate System (VACS) Panel 13 and15 July 2006 Tanzanian Meteorology Agency, Dar es Salaam Workshop (see workshop report no. XXXXX). The first day was held jointly with the workshop at the Dar es Salaam International Conference Centre. The rest of the meeting was kindly hosted at the Tanzania

Quartly, Graham

368

International Studies Degree  

E-Print Network [OSTI]

Business Administration Foreign Affairs Specialist US Department of Energy Lead Case Advocate Houston AreaBGSU® n n n What I did with my International Studies Degree Bowing Green State University 103 Shatzel Hall Bowling Green, OH 43403-0001 n n n isp@bgsu.edu http://www.bgsu.edu/departments/isp n n n

Moore, Paul A.

369

International Jordan Expedition 1966  

Science Journals Connector (OSTI)

... IN 1963 and 1965 British expeditions visited the Azraq oasis and surrounding desert in Jordan arid reported on the favour-ability of the area as a ... in Jordan arid reported on the favour-ability of the area as a Desert National Park and site for an International Biological Station dealing with oasis and ...

J. MORTON BOYD

1966-11-12T23:59:59.000Z

370

INTERNATIONAL PACIFIC RESEARCH CENTER  

E-Print Network [OSTI]

INTERNATIONAL PACIFIC RESEARCH CENTER APRIL 2005­MARCH 2006 REPORT SCHOOL OF OCEAN AND EARTH Center 1 The Year's Highlights 3 Indo-Pacific Ocean Climate 4 Regional-Ocean Influences 10 Asian Ocean Climate: To understand climate variations in the Pacific and Indian oceans on interannual

Wang, Yuqing

371

International Pacific Research Center  

E-Print Network [OSTI]

International Pacific Research Center APRIL 2007­MARCH 2008 REPORT School of Ocean and Earth Center i Foreword ii iv Indo-Pacific Ocean Climate 1 Regional-Ocean Influences 13 Asian by the following broad research themes and goals of the IPRC Science Plan. Indo-Pacific Ocean Climate

Wang, Yuqing

372

INTERNATIONAL PACIFIC RESEARCH CENTER  

E-Print Network [OSTI]

INTERNATIONAL PACIFIC RESEARCH CENTER Annual Report April 2006 ­ March 2007 School of Ocean Research Center 1 2 The Year's Highlights 3 Research Accomplishments Indo-Pacific Ocean Climate 4 Regional-Ocean Ocean Climate: To understand climate variations in the Pacific and Indian oceans on inter- annual

Wang, Yuqing

373

Equity in international agreements  

SciTech Connect (OSTI)

Approaches to establishing equitable greenhouse gas emission policies among different nations are briefly discussed. The impact of energy efficiency is proposed as an aid to equitable resource distribution. A comprehensive approach which would account for changes in net greenhouse gases is discussed. In addition, international trading of net greenhouse gas emissions reduction credits is proposed.

Stewart, R. [Georgetown Univ. Law Center, Washington, DC (United States)

1992-12-31T23:59:59.000Z

374

Design Considerations  

Office of Environmental Management (EM)

and leakage rates into and out of the cleanup system tend to become additional factors that must be considered in the overall design of the facility. When cleanup systems...

375

Biosystems Design  

Broader source: Energy.gov [DOE]

Breakout Session 2: Frontiers and Horizons Session 2-A: Synthetic Biology and the Promise of Biofuels Pablo Rabinowicz, Program Manager, Biosystems Design Program, Biological and Environmental Research (BER), U.S. Department of Energy

376

International Nuclear Energy Research Initiative (I-NERI) Annual Reports |  

Broader source: Energy.gov (indexed) [DOE]

International Nuclear Energy Policy and Cooperation International Nuclear Energy Policy and Cooperation » Bilateral Cooperation » International Nuclear Energy Research Initiative (I-NERI) Annual Reports International Nuclear Energy Research Initiative (I-NERI) Annual Reports August 13, 2013 International Nuclear Energy Research Initiative: 2012 Annual Report Nuclear energy represents the single largest carbon-free baseload source of energy in the United States, accounting for nearly 20 percent of the electricity generated and over 60 percent of our low-carbon production. Worldwide, nuclear power generates 14 percent of global electricity. Continually increasing demand for clean energy both domestically and across the globe, combined with research designed to make nuclear power ever-safer and more cost-effective, will keep nuclear in the energy mix for the

377

The Internship: Hollywood Plot is a Reality for One SRR Intern | Department  

Broader source: Energy.gov (indexed) [DOE]

The Internship: Hollywood Plot is a Reality for One SRR Intern The Internship: Hollywood Plot is a Reality for One SRR Intern The Internship: Hollywood Plot is a Reality for One SRR Intern June 20, 2013 - 12:00pm Addthis Johnny Whitaker, a college intern at Savannah River Remediation (SRR), uses system analysis and design to help develop a web-accessible inventory system for SRR subject matter experts. Johnny Whitaker, a college intern at Savannah River Remediation (SRR), uses system analysis and design to help develop a web-accessible inventory system for SRR subject matter experts. In the summer comedy The Internship, two middle-aged men vie for jobs and new careers in the tech industry as Google interns. They are starting over and moving forward, just like one Savannah River Remediation (SRR) intern. Johnny Whitaker has a sense of humor, but he's taking his new venture

378

The Internship: Hollywood Plot is a Reality for One SRR Intern | Department  

Broader source: Energy.gov (indexed) [DOE]

The Internship: Hollywood Plot is a Reality for One SRR Intern The Internship: Hollywood Plot is a Reality for One SRR Intern The Internship: Hollywood Plot is a Reality for One SRR Intern June 20, 2013 - 12:00pm Addthis Johnny Whitaker, a college intern at Savannah River Remediation (SRR), uses system analysis and design to help develop a web-accessible inventory system for SRR subject matter experts. Johnny Whitaker, a college intern at Savannah River Remediation (SRR), uses system analysis and design to help develop a web-accessible inventory system for SRR subject matter experts. In the summer comedy The Internship, two middle-aged men vie for jobs and new careers in the tech industry as Google interns. They are starting over and moving forward, just like one Savannah River Remediation (SRR) intern. Johnny Whitaker has a sense of humor, but he's taking his new venture

379

Carlsbad Field Office Members Are DOE Judges at International Environmental  

Broader source: Energy.gov (indexed) [DOE]

Carlsbad Field Office Members Are DOE Judges at International Carlsbad Field Office Members Are DOE Judges at International Environmental Design Contest Carlsbad Field Office Members Are DOE Judges at International Environmental Design Contest April 1, 2012 - 12:00pm Addthis California Polytechnic State University students test output from cyclone treatment at the 2012 WERC IEDC. California Polytechnic State University students test output from cyclone treatment at the 2012 WERC IEDC. Contestants from the University of Idaho think it through at the 2012 WERC IEDC. The annual competition includes college students from universities worldwide, who showcase their engineering design solutions. Their solutions are judged by industry and academic professionals. Contestants from the University of Idaho think it through at the 2012 WERC

380

International investigation of electronic waste recycling plant design  

E-Print Network [OSTI]

This thesis investigates the industry of electronic waste recycling industry in three countries: Germany, the United States, and Chile. Despite differences in the legal structure surrounding the industry, there are many ...

Theurer, Jean E

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

School of Art & Design Postgraduate International Scholarship Opportunities 2014 / 15  

E-Print Network [OSTI]

, Venezuela, Guyana, Suriname, French Guyana, Brazil, Ecuador, Peru, Bolivia, Paraguay, Uruguay, Argentina

Evans, Paul

382

Vaporizer design criteria for ethanol fueled internal combustion engines  

E-Print Network [OSTI]

been identified in conversion of diesel engines of farm tractors for using alcohol fuels. Distillation at atmospheric pressure does not yield 200 proof ethanol, (Winston, 1981), so with present technology, ethanol produced on farms is aqueous. A... engines 2. Modify diesel to tolerate straight ethanol injection. 3. Mix ethanol with diesel fuel. 4. Carburete the ethanol separately Converting Diesels To SI Engines Most diesel engines currently used in tractors operate with compression ratios...

Ariyaratne, Arachchi Rallage

2012-06-07T23:59:59.000Z

383

SciTech Connect: International Linear Collider Technical Design...  

Office of Scientific and Technical Information (OSTI)

Physics (HEP) Country of Publication: United States Language: English Subject: Phenomenology-HEP,HEPPH Word Cloud More Like This Full Text preview image File size NAView Full...

384

International workshop on cold neutron sources  

SciTech Connect (OSTI)

The first meeting devoted to cold neutron sources was held at the Los Alamos National Laboratory on March 5--8, 1990. Cosponsored by Los Alamos and Oak Ridge National Laboratories, the meeting was organized as an International Workshop on Cold Neutron Sources and brought together experts in the field of cold-neutron-source design for reactors and spallation sources. Eighty-four people from seven countries attended. Because the meeting was the first of its kind in over forty years, much time was spent acquainting participants with past and planned activities at reactor and spallation facilities worldwide. As a result, the meeting had more of a conference flavor than one of a workshop. The general topics covered at the workshop included: Criteria for cold source design; neutronic predictions and performance; energy deposition and removal; engineering design, fabrication, and operation; material properties; radiation damage; instrumentation; safety; existing cold sources; and future cold sources.

Russell, G.J.; West, C.D. (comps.) (Los Alamos National Lab., NM (United States)) [comps.; Los Alamos National Lab., NM (United States)

1991-08-01T23:59:59.000Z

385

DOE - Office of Legacy Management -- International Nickel Co - Bayonne  

Office of Legacy Management (LM)

Nickel Co - Bayonne Nickel Co - Bayonne Laboratories - NJ 17 FUSRAP Considered Sites Site: International Nickel Co., Bayonne Laboratories (NJ.17 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Bayonne , New Jersey NJ.17-1 Evaluation Year: 1994 NJ.17-1 Site Operations: Conducted research on the nickel plating of uranium metal. NJ.17-2 Site Disposition: Eliminated - Potential for contamination considered remote due to limited scope of the operations Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium NJ.17-2 Radiological Survey(s): None Indicated Site Status: Eliminated from consideration under FUSRAP Also see Documents Related to International Nickel Co., Bayonne Laboratories

386

International Health Global Health Policy--------------------------------------------------------------------------------------  

E-Print Network [OSTI]

50 International Health Global Health Policy-------------------------------------------------------------------------------------- http://www.ghp.m.u-tokyo.ac.jp Our mission is to improve population health by enhancing accountability and improving evidence base of global (both domestic and international) health programmes through the provision

Miyashita, Yasushi

387

International Relations and Development Studies  

E-Print Network [OSTI]

& Anthropology and Languages (choice of French, Arabic, German, Italian or Spanish) The International Relations Economy, Languages (French, Spanish, Arabic, German, Italian), International Trade, Middle East Politics experience a broad range of opportunities outside the classroom: - Explore exchange opportunities with dozens

388

International migration within Latin America  

E-Print Network [OSTI]

International migration within Latin America ·Mostly labor circulation flows ·Industrial and urban;Example of International migration: Mexicans to US ·1920s revolution and post- revolution chaos in Mexico

Lopez-Carr, David

389

International Energy Outlook 2007  

Gasoline and Diesel Fuel Update (EIA)

7 7 (IEO2007) presents an assessment by the Energy Information Admin- istration (EIA) of the outlook for international energy markets through 2030. U.S. projections appearing in IEO2007 are consistent with those published in EIA's Annual Energy Outlook 2007 (AEO2007), which was pre- pared using the National Energy Modeling System (NEMS). IEO2007 is provided as a service to energy managers and analysts, both in government and in the private sector. The projections are used by international agencies, Federal and State governments, trade associa- tions, and other planners and decisionmakers. They are published pursuant to the Department of Energy Orga- nization Act of 1977 (Public Law 95-91), Section 205(c). Projections in IEO2007 are divided according to Organi- zation for Economic Cooperation and Development members (OECD) and non-members (non-OECD). There are

390

International Energy Outlook 1997  

Gasoline and Diesel Fuel Update (EIA)

7) 7) Distribution Category UC-950 International Energy Outlook 1997 April 1997 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. Contacts The International Energy Outlook is prepared by the Energy Information Administration (EIA). General questions concerning the contents of the report should be referred to Mary J. Hutzler (202/586-2222), Director, Office of Integrated Analysis and Forecasting; Arthur T. Andersen (202/586-1441), Director, Energy Demand and Integration Division;

391

International Energy Outlook 2006  

Gasoline and Diesel Fuel Update (EIA)

6 6 (IEO2006) presents an assessment by the Energy Information Administra- tion (EIA) of the outlook for international energy mar- kets through 2030. U.S. projections appearing in IEO2006 are consistent with those published in EIA's Annual Energy Outlook 2006 (AEO2006), which was pre- pared using the National Energy Modeling System (NEMS). IEO2006 is provided as a service to energy managers and analysts, both in government and in the private sector. The projections are used by international agencies, Federal and State governments, trade associa- tions, and other planners and decisionmakers. They are published pursuant to the Department of Energy Orga- nization Act of 1977 (Public Law 95-91), Section 205(c). IEO2006 focuses exclusively on marketed energy. Non- marketed energy sources, which continue to play an important role in some developing countries, are not included

392

International Energy Outlook 1995  

Gasoline and Diesel Fuel Update (EIA)

5) 5) Distribution Category UC-950 International Energy Outlook 1995 May 1995 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. Contacts The International Energy Outlook is prepared by the Energy Information Administration (EIA). General questions concerning the contents of the report should be referred to Mary J. Hutzler (202/586-2222), Director, Office of Integrated Analysis and Forecasting; Arthur T. Andersen (202/586-1441), Director, Energy Demand and Integration Division;

393

International Energy Outlook - Electicity  

Gasoline and Diesel Fuel Update (EIA)

Electricity Electricity International Energy Outlook 2004 Electricity Electricity consumption nearly doubles in the IEO2004 projections. Developing nations in Asia are expected to lead the increase in world electricity use. Figure 60. World Net Electricity Consumptin, 2001-2025. Need help, call the National Energy Information Center at 202-586-8800. Figure Data Figure 61. World Net Electricity Consumptin by Region, 2001-2025. Need help, call the National Energy Information Center at 202-586-8800. Figure Data World net electricity consumption is expected nearly double to over the next two decades, according to the International Energy Outlook 2004 (IEO2004) reference case forecast. Total demand for electricity is projected to increase on average by 2.3 percent per year, from 13,290

394

International Energy Outlook 1999  

Gasoline and Diesel Fuel Update (EIA)

contacts.gif (2957 bytes) contacts.gif (2957 bytes) The International Energy Outlook is prepared by the Energy Information Administration (EIA). General questions concerning the contents of the report should be referred to Mary J. Hutzler (202/586-2222), Director, Office of Integrated Analysis and Forecasting, or Arthur T. Andersen, Director, International, Economic, and Greenhouse Gases Division. Specific questions about the report should be referred to Linda E. Doman (202/586-1041) or the following analysts: Report Contact World Energy Consumption Linda E. Doman - 202/586-1041 linda.doman@eia.doe.gov World Oil Markets G. Daniel Butler - 202/586-9503 gbutler@eia.doe.gov Stacy MacIntyre - 202/586-9795- (Consumption) stacy.macintyre@eia.doe.gov Natural Gas Linda E. Doman - 202/586-1041

395

Internal Resources Home  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Budget Budget Proposals Human Resources Administration Internal Resources Administration--Includes an Administrative Services Directory and an A-Z index. Budget - Contacts Employee Talent Profile System--A system, launched by Jay Keasling in late 2012, populated with profiles of both scientists and non-scientists, meant to be a resource for the creation of teams across the Biosciences Area and the persue of collective funding opportunities both internal and external to the Laboratory. Complete your profile and look for more system enhancements in the coming year. Equipment List (viewable by Berkeley Lab staff only) -- A list of equipment used in the Life Sciences Division. Several equipment needs training prior to use, therefore, please always contact the person responsible if interested in using the equipment. If listed as a contact on

396

International Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Contacts Contacts Contacts The International Energy Outlook is prepared by the Office of Integrated Analysis and Forecasting (OIAF). General questions concerning the contents of the report should be referred to John Conti, Director, International, Economic and Greenhouse Gases Division (202/586-4430). Specific questions about the report should be referred to Linda E. Doman (202/586-1041 or linda.doman@eia.doe.gov) or the following analysts: Macroeconomic Assumptions Nasir Khilji (nasir.khilji@eia.doe.gov, 202/586-1294) World Oil Markets G. Daniel Butler (george.butler@eia.doe.gov, 202/586-9503) Natural Gas Phyllis Martin (phyllis.martin@eia.doe.gov, 202/586-9592) Justine Bardin (justine.baren@eia.doe.gov 202/586-3508) Coal Michael Mellish (michael.mellish@eia.doe.gov,

397

International Energy Outlook 1998  

Gasoline and Diesel Fuel Update (EIA)

Contacts Contacts The International Energy Outlook is prepared by the Energy Information Administration (EIA). General questions concerning the contents of the report should be referred to Mary J. Hutzler (202/586-2222), Director, Office of Integrated Analysis and Forecasting, or Arthur T. Andersen (202/586-1441), Director, International, Economic, and Greenhouse Gases Division. Specific questions about the report should be referred toLinda E. Doman (202/586-1041) or the following analysts: World Energy Consumption Arthur Andersen (art.andersen@eia.doe.gov, 202/586-1441) Linda E. Doman (linda.doman@eia.doe.gov, 202/586-1041) World Oil Markets G. Daniel Butler (george.butler@eia.doe.gov, 202/586-9503) Perry Lindstrom (perry.lindstrom@eia.doe.gov, 202/586-0934) Reformulated Gasoline

398

International Nuclear Security  

SciTech Connect (OSTI)

This presentation discusses: (1) Definitions of international nuclear security; (2) What degree of security do we have now; (3) Limitations of a nuclear security strategy focused on national lock-downs of fissile materials and weapons; (4) What do current trends say about the future; and (5) How can nuclear security be strengthened? Nuclear security can be strengthened by: (1) More accurate baseline inventories; (2) Better physical protection, control and accounting; (3) Effective personnel reliability programs; (4) Minimize weapons-usable materials and consolidate to fewer locations; (5) Consider local threat environment when siting facilities; (6) Implement pledges made in the NSS process; and (7) More robust interdiction, emergency response and special operations capabilities. International cooperation is desirable, but not always possible.

Doyle, James E. [Los Alamos National Laboratory

2012-08-14T23:59:59.000Z

399

International energy outlook 2006  

SciTech Connect (OSTI)

This report presents international energy projections through 2030, prepared by the Energy Information Administration. After a chapter entitled 'Highlights', the report begins with a review of world energy and economic outlook, followed by energy consumption by end-use sector. The next chapter is on world oil markets. Natural gas, world coal market and electricity consumption and supply are then discussed. The final chapter covers energy-related carbon dioxide emissions.

NONE

2006-06-15T23:59:59.000Z

400

Polarized internal target apparatus  

DOE Patents [OSTI]

A polarized internal target apparatus with a polarized gas target of improved polarization and density (achieved by mixing target gas atoms with a small amount of alkali metal gas atoms, and passing a high intensity polarized light source into the mixture to cause the alkali metal gas atoms to become polarized which interact in spin exchange collisions with target gas atoms yielding polarized target gas atoms) is described.

Holt, R.J.

1984-10-10T23:59:59.000Z

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

International petroleum statistics report  

SciTech Connect (OSTI)

This report presents data on international oil production, demand, imports, exports, and stocks. Section 1 contains time series data on world oil production, and on oil demand and stocks in the OECD. Section 2 presents an oil supply/demand balance for the world, presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. Section 4 presents annual time series data on world oil production, oil stocks, demand, and trade in OECD countries.

Not Available

1994-06-01T23:59:59.000Z

402

International petroleum statistics report  

SciTech Connect (OSTI)

This document is a monthly publication which provides current data on international oil production,demand,imports and stocks. This report has four sections which contain time series data on world oil production and oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Also included is oil supply/demand balance information for the world, and data on oil imports and trade by OECD countries.

NONE

1997-11-01T23:59:59.000Z

403

Polarized internal target apparatus  

DOE Patents [OSTI]

A polarized internal target apparatus with a polarized gas target of improved polarization and density achieved by mixing target gas atoms with a small amount of alkali metal gas atoms, and passing a high intensity polarized light source into the mixture to cause the alkali metal gas atoms to become polarized which interact in spin exchange collisions with target gas atoms yielding polarized target gas atoms.

Holt, Roy J. (Downers Grove, IL)

1986-01-01T23:59:59.000Z

404

International markets for CCTs  

SciTech Connect (OSTI)

The paper begins by describing the role of the International Energy Agency, the importance of coal, what the IEA is doing in the area of clean coal technology, and the role of the IEA Coal Industry Advisory Board. The paper then discusses which coal technologies will be chosen, what the problem areas are, and what can be done to accelerate the take-up of clean coal technologies.

Ferriter, J.P. [International Energy Agency, Paris (France)

1997-12-31T23:59:59.000Z

405

Hanford internal dosimetry program manual  

SciTech Connect (OSTI)

This document describes the Hanford Internal Dosimetry program. Program Services include administrating the bioassay monitoring program, evaluating and documenting assessments of internal exposure and dose, ensuring that analytical laboratories conform to requirements, selecting and applying appropriate models and procedures for evaluating internal radionuclide deposition and the resulting dose, and technically guiding and supporting Hanford contractors in matters regarding internal dosimetry. 13 refs., 16 figs., 42 tabs.

Carbaugh, E.H.; Sula, M.J.; Bihl, D.E.; Aldridge, T.L.

1989-10-01T23:59:59.000Z

406

International petroleum statistics report  

SciTech Connect (OSTI)

The International Petroleum Statistics Report is a monthly publication that provides current international data. The report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent 12 months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1996; OECD stocks from 1973 through 1996; and OECD trade from 1986 through 1996.

NONE

1997-07-01T23:59:59.000Z

407

International Journal of Offshore and Polar Engineering (ISSN 1053-5381) Copyright by The International Society of Offshore and Polar Engineers  

E-Print Network [OSTI]

International Journal of Offshore and Polar Engineering (ISSN 1053-5381) Copyright © by The International Society of Offshore and Polar Engineers Vol. 15, No. 2, June 2005, pp. 1­9 On Assessing the Accuracy of Offshore Wind Turbine Reliability-based Design Loads from the Environmental Contour Method Korn

Manuel, Lance

408

International Finance and Climate Change  

E-Print Network [OSTI]

International Finance and Climate Change Thursday, October 17, 2013 Breakfast ­ 8:30 a Principal Climate Change Specialist, Climate Business Group at International Finance Corporation, World Bank Group Vladimir Stenek Senior Climate Change Specialist, Climate Business Department of the International

Zhang, Junshan

409

MENTAL HEALTH and INTERNATIONAL STUDENTS  

E-Print Network [OSTI]

MENTAL HEALTH and INTERNATIONAL STUDENTS: What Educators Need to Know Ingle International cares not adequately researched, it is well accepted by health care professionals that early intervention could about you and your students www.studyinsured.com #12;www.studyinsured.comMental Health and International

410

Third International Congress on Glass  

Science Journals Connector (OSTI)

... THE Third International Congress on Glass was held in Venice during June 29-July 2, associated with the International Commission ... was held in Venice during June 29-July 2, associated with the International Commission on Glass, the annual meeting of which was held on July 3. 179 delegates attended from ...

1953-08-15T23:59:59.000Z

411

International Phenomenological Society On Nominalism  

E-Print Network [OSTI]

International Phenomenological Society On Nominalism Author(s): Geoffrey Hellman Source: Philosophy and Phenomenological Research, Vol. 62, No. 3 (May, 2001), pp. 691-705 Published by: International Phenomenological contact support@jstor.org. . International Phenomenological Society is collaborating with JSTOR

Hellman, Geoffrey

412

E-Print Network 3.0 - antiviral drug design Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Pharmacology and Pharmaceutical Sciences. his research interests include drug design and discovery, database mining of small- Summary: an internationally recognized...

413

International Electricity Trade - Open Access | Department of...  

Broader source: Energy.gov (indexed) [DOE]

International Electricity Trade - Open Access International Electricity Trade - Open Access DOE has consistently expressed its policy that international electricity trade should be...

414

International Fuel Services and Commercial Engagement | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

International Fuel Services and Commercial Engagement International Fuel Services and Commercial Engagement The Office of International Nuclear Energy Policy and Cooperation...

415

The International Large Detector: Letter of Intent  

E-Print Network [OSTI]

The International Large Detector (ILD) is a concept for a detector at the International Linear Collider, ILC. The ILC will collide electrons and positrons at energies of initially 500 GeV, upgradeable to 1 TeV. The ILC has an ambitious physics program, which will extend and complement that of the Large Hadron Collider (LHC). A hallmark of physics at the ILC is precision. The clean initial state and the comparatively benign environment of a lepton collider are ideally suited to high precision measurements. To take full advantage of the physics potential of ILC places great demands on the detector performance. The design of ILD is driven by these requirements. Excellent calorimetry and tracking are combined to obtain the best possible overall event reconstruction, including the capability to reconstruct individual particles within jets for particle ow calorimetry. This requires excellent spatial resolution for all detector systems. A highly granular calorimeter system is combined with a central tracker which st...

Abe, Toshinori; Abramowicz, Halina; Adamus, Marek; Adeva, Bernardo; Afanaciev, Konstantin; Aguilar-Saavedra, Juan Antonio; Alabau Pons, Carmen; Albrecht, Hartwig; Andricek, Ladislav; Anduze, Marc; Aplin, Steve J.; Arai, Yasuo; Asano, Masaki; Attie, David; Attree, Derek J.; Burger, Jochen; Bailey, David; Balbuena, Juan Pablo; Ball, Markus; Ballin, James; Barbi, Mauricio; Barlow, Roger; Bartels, Christoph; Bartsch, Valeria; Bassignana, Daniela; Bates, Richard; Baudot, Jerome; Bechtle, Philip; Beck, Jeannine; Beckmann, Moritz; Bedjidian, Marc; Behnke, Ties; Belkadhi, Khaled; Bellerive, Alain; Bentvelsen, Stan; Bergauer, Thomas; Berggren, C.Mikael U.; Bergholz, Matthias; Bernreuther, Werner; Besancon, Marc; Besson, Auguste; Bhattacharya, Sudeb; Bhuyan, Bipul; Biebel, Otmar; Bilki, Burak; Blair, Grahame; Blumlein, Johannes; Bo, Li; Boisvert, Veronique; Bondar, A.; Bonvicini, Giovanni; Boos, Eduard; Boudry, Vincent; Bouquet, Bernard; Bouvier, Joel; Bozovic-Jelisavcic, Ivanka; Brient, Jean-Claude; Brock, Ian; Brogna, Andrea; Buchholz, Peter; Buesser, Karsten; Bulgheroni, Antonio; Butler, John; Buttar, Craig; Buzulutskov, A.F.; Caccia, Massimo; Caiazza, Stefano; Calcaterra, Alessandro; Caldwell, Allen; Callier, Stephane L.C.; Calvo Alamillo, Enrique; Campbell, Michael; Campbell, Alan J.; Cappellini, Chiara; Carloganu, Cristina; Castro, Nuno; Castro Carballo, Maria Elena; Chadeeva, Marina; Chakraborty, Dhiman; Chang, Paoti; Charpy, Alexandre; Chen, Xun; Chen, Shaomin; Chen, Hongfang; Cheon, Byunggu; Choi, Suyong; Choudhary, B.C.; Christen, Sandra; Ciborowski, Jacek; Ciobanu, Catalin; Claus, Gilles; Clerc, Catherine; Coca, Cornelia; Colas, Paul; Colijn, Auke; Colledani, Claude; Combaret, Christophe; Cornat, Remi; Cornebise, Patrick; Corriveau, Francois; Cvach, Jaroslav; Czakon, Michal; D'Ascenzo, Nicola; Da Silva, Wilfrid; Dadoun, Olivier; Dam, Mogens; Damerell, Chris; Danilov, Mikhail; Daniluk, Witold; Daubard, Guillaume; David, Dorte; David, Jacques; De Boer, Wim; De Groot, Nicolo; De Jong, Sijbrand; De Jong, Paul; De La Taille, Christophe; De Masi, Rita; De Roeck, Albert; Decotigny, David; Dehmelt, Klaus; Delagnes, Eric; Deng, Zhi; Desch, Klaus; Dieguez, Angel; Diener, Ralf; Dima, Mihai-Octavian; Dissertori, Gunther; Dixit, Madhu S.; Dolezal, Zdenek; Dolgoshein, Boris A.; Dollan, Ralph; Dorokhov, Andrei; Doublet, Philippe; Doyle, Tony; Doziere, Guy; Dragicevic, Marko; Drasal, Zbynek; Drugakov, Vladimir; Duarte Campderros, Jordi; Dulucq, Frederic; Dumitru, Laurentiu Alexandru; Dzahini, Daniel; Eberl, Helmut; Eckerlin, Guenter; Ehrenfeld, Wolfgang; Eigen, Gerald; Eklund, Lars; Elsen, Eckhard; Elsener, Konrad; Emeliantchik, Igor; Engels, Jan; Evrard, Christophe; Fabbri, Riccardo; Faber, Gerard; Faucci Giannelli, Michele; Faus-Golfe, Angeles; Feege, Nils; Feng, Cunfeng; Ferencei, Jozef; Fernandez Garcia, Marcos; Filthaut, Frank; Fleck, Ivor; Fleischer, Manfred; Fleta, Celeste; Fleury, Julien L.; Fontaine, Jean-Charles; Foster, Brian; Fourches, Nicolas; Fouz, Mary-Cruz; Frank, Sebastian; Frey, Ariane; Frotin, Mickael; Fujii, Hirofumi; Fujii, Keisuke; Fujimoto, Junpei; Fujita, Yowichi; Fusayasu, Takahiro; Fuster, Juan; Gaddi, Andrea; Gaede, Frank; Galkin, Alexei; Galkin, Valery; Gallas, Abraham; Gallin-Martel, Laurent; Gamba, Diego; Gao, Yuanning; Garrido Beltran, Lluis; Garutti, Erika; Gastaldi, Franck; Gaur, Bakul; Gay, Pascal; Gellrich, Andreas; Genat, Jean-Francois; Gentile, Simonetta; Gerwig, Hubert; Gibbons, Lawrence; Ginina, Elena; Giraud, Julien; Giraudo, Giuseppe; Gladilin, Leonid; Goldstein, Joel; Gonzalez Sanchez, Francisco Javier; Gournaris, Filimon; Greenshaw, Tim; Greenwood, Z.D.; Grefe, Christian; Gregor, Ingrid-Maria; Grenier, Gerald Jean; Gris, Philippe; Grondin, Denis; Grunewald, Martin; Grzelak, Grzegorz; Gurtu, Atul; Haas, Tobias; Haensel, Stephan; Hajdu, Csaba; Hallermann, Lea; Han, Liang; Hansen, Peter H.; Hara, Takanori; Harder, Kristian; Hartin, Anthony; Haruyama, Tomiyoshi; Harz, Martin; Hasegawa, Yoji; Hauschild, Michael; He, Qing; Hedberg, Vincent; Hedin, David; Heinze, Isa; Helebrant, Christian; Henschel, Hans; Hensel, Carsten; Hertenberger, Ralf; Herve, Alain; Higuchi, Takeo; Himmi, Abdelkader; Hironori, Kazurayama; Hlucha, Hana; Hommels, Bart; Horii, Yasuyuki; Horvath, Dezso; Hostachy, Jean-Yves; Hou, Wei-Shu; Hu-Guo, Christine; Huang, Xingtao; Huppert, Jean Francois; Ide, Yasuhiro; Idzik, Marek; Iglesias Escudero, Carmen; Ignatenko, Alexandr; Igonkina, Olga; Ikeda, Hirokazu; Ikematsu, Katsumasa; Ikemoto, Yukiko; Ikuno, Toshinori; Imbault, Didier; Imhof, Andreas; Imhoff, Marc; Ingbir, Ronen; Inoue, Eiji

2010-01-01T23:59:59.000Z

416

Aircraft Design  

Science Journals Connector (OSTI)

... his subject is more applied than academic, making it appear to be a designer's handbook rather than a student's text-book. Even then “he falls between two stools ... falls between two stools”, giving neither enough facts and figures for the one, nor fundamental proofs for the other. Nevertheless the subject matter, so far as it goes, ...

1940-03-09T23:59:59.000Z

417

Meta-Design--Design for Designers Gerhard Fischer  

E-Print Network [OSTI]

1 Meta-Design--Design for Designers Gerhard Fischer Center for LifeLong Learning and Design (L3 D-0430 USA gerhard@cs.colorado.edu Eric Scharff Center for LifeLong Learning and Design (L3 D) Department scharffe@cs.colorado.edu ABSTRACT One fundamental challenge for the design of the interactive systems

Fischer, Gerhard

418

AIDE: internal dosimetry software  

Science Journals Connector (OSTI)

......Technology to Radiation Protection...Occupational Radiation Doses Due...AEA. IAEA Safety Reports Series...dosimetry software. | AIDE...in the IAEA Safety Reports Series...Respiratory System radiation effects Software Software Design......

L. Bertelli; D. R. Melo; J. Lipsztein; R. Cruz-Suarez

2008-07-01T23:59:59.000Z

419

Office of International Health Studies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

International Health Studies International Health Studies Home Mission and Functions Japan Radiation Effects Research Foundation (RERF) Studies Marshall Islands Program Russian Health Studies Program Russian Radiobiology Human Tissue Repository Spain (Palomares) Program Health and Safety HSS Logo Office of International Health Studies Reports to the Office of Health and Safety Mission and Functions Mission The Office of International Health Studies engages in the conduct of international scientific studies that may provide new knowledge and information about the human response to ionizing radiation in the workplace or people exposed in communities as a result of nuclear accidents. The mission includes providing health and environmental monitoring services to populations specified by law.

420

International Truck | Open Energy Information  

Open Energy Info (EERE)

Truck Truck Jump to: navigation, search Name International Truck Place Atlanta, GA Website http://www.internationaltruck. References International Truck[1] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Other Relationship Partnering Center within NREL Transportation Technologies and Systems Partnership Year 2007 LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! International Truck is a company located in Atlanta, GA. References ↑ "International Truck" Retrieved from "http://en.openei.org/w/index.php?title=International_Truck&oldid=381698" Categories: Clean Energy Organizations Companies Organizations What links here Related changes Special pages Printable version Permanent link

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

International | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

International | National Nuclear Security Administration International | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog International Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management & Safeguards System > International International U.S. Department of Energy / U.S. Nuclear Regulatory Commission

422

para-Octaiodophenylsilsesquioxane, [p-IC6H4SiO1.5]8, a Nearly Perfect Nano-Building Block  

Science Journals Connector (OSTI)

para-Octaiodophenylsilsesquioxane, [p-IC6H4SiO1.5]8, a Nearly Perfect Nano-Building Block ... These structures include the very difficult to prepare cubane family of compounds(1-3) and the easily prepared cubic silsesquioxanes (SQs), Q8 [RMe2SiOSiO1.5]8 and T8 [RC6H4SiO1.5]8, or polyhedral oligomeric silsesquioxane (POSS) materials. ... appears to form by a multi-step POSS aggregation during the process of phase sepn. ...

Mark F. Roll; Michael Z. Asuncion; Jeffrey Kampf; Richard M. Laine

2008-01-31T23:59:59.000Z

423

International Team | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

International Team International Team International Team The Office of Energy Efficiency and Renewable Energy's (EERE's) International Team advances the progress of EERE's domestic programs and accelerates global deployment of U.S. clean energy products and services through international collaboration. To realize the benefits of international collaboration, we coordinate with other offices in the U.S. Department of Energy and U.S. government agencies to identify, negotiate and actively manage targeted partnerships and projects that help advance our strategic goals. The collaborative research we support is either in the "pre-competitive" space or includes intellectual property issues that have been agreed upon in advance. All funds support U.S.-based project performers or international organizations

424

International Programs | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

International Programs International Programs International Programs The Office of Environmental Management (EM) International Program seeks out international technical experts to support EM's mission of accelerated risk reduction and cleanup of the environmental legacy of the nation's nuclear weapons program and government-sponsored nuclear energy research. To achieve this, EM pursues collaborations with foreign government organizations, educational institutions, and private industry to identify technologies that can address the site cleanup needs of the U.S. Department of Energy. The EM International Program currently works with the Russian Federation and Ukraine through cooperative bilateral arrangements to support EM's accelerated cleanup and closure mission. The EM International Program is also currently evaluating the potential benefits

425

Internal absorber solar collector  

DOE Patents [OSTI]

Thin solar collecting panels are described made from arrays of small rod collectors consisting of a refracting dielectric rod lens with an absorber imbedded within it and a reflecting mirror coated on the back side of the dielectric rod. Non-tracking collector panels on vertical walls or roof tops receive approximately 90% of solar radiation within an acceptance zone 60.degree. in elevation angle by 120.degree. or more in the azimuth sectors with a collector concentration ratio of approximately 3.0. Miniaturized construction of the circular dielectric rods with internal absorbers reduces the weight per area of glass, plastic and metal used in the collector panels. No external parts or insulation are needed as heat losses are low due to partial vacuum or low conductivity gas surrounding heated portions of the collector. The miniature internal absorbers are generally made of solid copper with black selective surface and the collected solar heat is extracted at the collector ends by thermal conductivity along the absorber rods. Heat is removed from end fittings by use of liquid circulants. Several alternate constructions are provided for simplifying collector panel fabrication and for preventing the thermal expansion and contraction of the heated absorber or circulant tubes from damaging vacuum seals. In a modified version of the internal absorber collector, oil with temperature dependent viscosity is pumped through a segmented absorber which is now composed of closely spaced insulated metal tubes. In this way the circulant is automatically diverted through heated portions of the absorber giving higher collector concentration ratios than theoretically possible for an unsegmented absorber.

Sletten, Carlyle J. (106 Nagog Hill Rd., Acton, MA 01720); Herskovitz, Sheldon B. (88 Hammond St., Acton, MA 01720); Holt, F. S. (46 Emerson Rd., Winchester, MA 01890); Sletten, E. J. (Chestnut Hill Rd. R.F.D. Rte. #4, Amherst, NH 03031)

1981-01-01T23:59:59.000Z

426

International Energy Outlook 1998  

Gasoline and Diesel Fuel Update (EIA)

B B World Energy Projection System The projections of world energy consumption published annually by the Energy Information Administration (EIA) in the International Energy Outlook (IEO) are derived from the World Energy Projection System (WEPS). WEPS is an integrated set of personal-computer-based spreadsheets containing data compilations, assumption specifications, descriptive analysis procedures, and projection models. The WEPS accounting framework incorporates projections from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product [GDP]) and about the rate of incremental energy requirements met by natural gas, coal, and renewable energy sources (hydroelectricity, geothermal, solar, wind, biomass, and

427

International petroleum statistics report  

SciTech Connect (OSTI)

This monthly publication provides international oil data for January 1998. The report presents data on oil production, demand, imports, and stocks in four sections. Section 1 containes time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. section 3 presents data on oil imports by OECD countries. Section 4 containes annual time series data on world oil production and oil stocks, demand, and trade in OECD countries.

NONE

1998-01-01T23:59:59.000Z

428

International energy annual, 1993  

SciTech Connect (OSTI)

This document presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 200 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy includes hydroelectric, geothermal, solar and wind electric power and alcohol for fuel. The data were largely derived from published sources and reports from US Embassy personnel in foreign posts. EIA also used data from reputable secondary sources, industry reports, etc.

NONE

1995-05-08T23:59:59.000Z

429

Metered Mail Form International Mail Only  

E-Print Network [OSTI]

Metered Mail Form International Mail Only Charge to Department USPS First Class Mail International International Metered Mail Form and must be kept separate from all other domestic mail. · International mail

Palmeri, Thomas

430

2010 International SWAT Conference Proceedings Conference Proceedings  

E-Print Network [OSTI]

2010 International SWAT Conference Proceedings Conference Proceedings #12;#12;Conference ProceedingsConference Proceedings #12;#12;2010 International SWAT Conference Proceedings Contents Conference-490 #12;2010 International SWAT Conference Proceedings 2010 International SWAT Conference Proceedings

431

Process Integration: Designing for Energy, Capital and Operability  

E-Print Network [OSTI]

Over the last five years, significant energy savings have been achieved by several international companies using the pinch concept for heat integration. New concepts are now being added to help the designer deal with capital cost minimization...

Linnhoff, B.

432

Control system design for a parallel hybrid electric vehicle  

E-Print Network [OSTI]

This thesis addresses the design of control systems for a parallel hybrid electric drive train which is an alternative to conventional passenger vehicles. The principle components of the drive train are a small internal combustion engine...

Buntin, David Leighton

1994-01-01T23:59:59.000Z

433

Engineering Design and Safety Basis Inspection Criteria, Inspection...  

Broader source: Energy.gov (indexed) [DOE]

the Engineering Design and Safety Basis Inspection Criteria, Inspection Activities, and Lines of Inquiry for internal use, which we are also making available on the Office of ES&H...

434

Nanoparticle Emissions from Internal Combustion Engines | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Nanoparticle Emissions from Internal Combustion Engines Nanoparticle Emissions from Internal Combustion Engines 2004 Diesel Engine Emissions Reduction (DEER) Conference...

435

Upcoming Webinar December 16: International Hydrogen Infrastructure...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Upcoming Webinar December 16: International Hydrogen Infrastructure Challenges NOW, DOE, and NEDO Upcoming Webinar December 16: International Hydrogen Infrastructure Challenges...

436

Florida International University Science and Technology Workforce...  

Broader source: Energy.gov (indexed) [DOE]

About Us Jobs & Internships Florida International University Science and Technology Workforce Development Program Florida International University Science and Technology...

437

Interested Parties - Organization for International Investment...  

Broader source: Energy.gov (indexed) [DOE]

Organization for International Investment Interested Parties - Organization for International Investment PI.pdf More Documents & Publications Interested Parties - Morgan Wright...

438

International Hydrogen Infrastructure Challenges Workshop Summary...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO, and DOE International Hydrogen Infrastructure Challenges Workshop Summary - NOW, NEDO, and DOE...

439

International Energy Outlook 2013  

Gasoline and Diesel Fuel Update (EIA)

U.S. Energy Information Administration | International Energy Outlook 2013 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections for electricity capacity and generation by fuel Table H13. World net liquids-fired electricity generation by region and country, 2010-2040 (billion kilowatthours) Region/country Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 OECD OECD Americas 93 74 68 66 64 62 60 -1.5 United States a 37 20 17 18 18 18 18 -2.3 Canada 7 7 6 6 6 5 5 -1.0 Mexico/Chile 49 47 45 42 40 38 36 -1.0 OECD Europe 77 73 70 66 63 60 57 -1.0 OECD Asia 112 157 102 97 92 87 83 -1.0 Japan 92 137 83 79 75 71 68 -1.0 South Korea 18 17 16 15 15 14 13 -1.0 Australia/New Zealand 3 3 3 3 2 2 2 -1.0 Total OECD 282 303 239 229 219 209 200 -1.1 Non-OECD Non-OECD Europe and Eurasia

440

International Energy Outlook 2013  

Gasoline and Diesel Fuel Update (EIA)

U.S. Energy Information Administration | International Energy Outlook 2013 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections Table A8. World nuclear energy consumption by region, Reference case, 2009-2040 (billion kilowatthours) Region History Projections Average annual percent change, 2010-2040 2009 2010 2015 2020 2025 2030 2035 2040 OECD OECD Americas 894 899 932 978 1,032 1,054 1,030 1,066 0.6 United States a 799 807 820 885 912 908 875 903 0.4 Canada 86 86 99 81 99 117 118 118 1.0 Mexico/Chile 10 6 12 12 21 29 37 46 7.3 OECD Europe 840 867 892 929 1,045 1,065 1,077 1,073 0.7 OECD Asia 406 415 301 447 490 551 557 576 1.1 Japan 266 274 103 192 200 206 209 209 -0.9 South Korea 140 141 198 255 291 346 348 367 3.2 Australia/NewZealand 0 0 0 0 0 0 0 0 -- Total OECD 2,140 2,181 2,124 2,354 2,567 2,670 2,664 2,715 0.7 Non-OECD Non-OECD Europe and Eurasia 272 274 344 414 475 533 592 630 2.8 Russia

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

International Energy Outlook 2013  

Gasoline and Diesel Fuel Update (EIA)

U.S. Energy Information Administration | International Energy Outlook 2013 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections Table A12. World carbon dioxide emissions from natural gas use by region, Reference case, 2009-2040 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2010-2040 2009 2010 2015 2020 2025 2030 2035 2040 OECD OECD Americas 1,511 1,563 1,686 1,793 1,888 1,987 2,114 2,233 1.2 United States a 1,222 1,266 1,357 1,404 1,431 1,468 1,528 1,570 0.7 Canada 170 162 171 199 223 240 255 271 1.7 Mexico/Chile 119 135 158 190 234 279 331 392 3.6 OECD Europe 1,024 1,082 1,086 1,123 1,144 1,215 1,277 1,348 0.7 OECD Asia 347 377 408 438 478 505 539 561 1.3 Japan 205 215 242 257 276 288 293 293 1.0 South Korea 72 90 91 98 110 117 136 148 1.7 Australia/NewZealand 70 71 75 83 91 101 110 119 1.7 Total OECD 2,882 3,022 3,180 3,353 3,510

442

International petroleum statistics report  

SciTech Connect (OSTI)

The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

NONE

1995-11-01T23:59:59.000Z

443

International petroleum statistics report  

SciTech Connect (OSTI)

The International Petroleum Statistics Report presents data on international oil production, demand, imports, exports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. World oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1084 through 1994.

NONE

1996-05-01T23:59:59.000Z

444

International petroleum statistics report  

SciTech Connect (OSTI)

The International Petroleum Statistics Report presents data on international oil production, demand, imports, and stocks. The report has four sections. Section 1 contains time series data on world oil production, and on oil demand and stocks in the Organization for Economic Cooperation and Development (OECD). This section contains annual data beginning in 1985, and monthly data for the most recent two years. Section 2 presents an oil supply/demand balance for the world. This balance is presented in quarterly intervals for the most recent two years. Section 3 presents data on oil imports by OECD countries. This section contains annual data for the most recent year, quarterly data for the most recent two quarters, and monthly data for the most recent twelve months. Section 4 presents annual time series data on world oil production and oil stocks, demand, and trade in OECD countries. Word oil production and OECD demand data are for the years 1970 through 1995; OECD stocks from 1973 through 1995; and OECD trade from 1985 through 1995.

NONE

1996-10-01T23:59:59.000Z

445

International energy indicators  

SciTech Connect (OSTI)

Extensive data are compiled for energy on the international scene and for the US. Data are indicated from the date given and into 1980 as far as available. Data are given for the international scene on: world crude oil production, 1975-to date; Iran: crude oil capacity, production, and shut-in, 1974-to date; Saudi Arabia: crude oil capacity, production, and shut-in, 1974-to date; OPEC (Ex-Iran and Saudi Arabia): capacity, production, and shut-in, 1974-to date; oil stocks: Free World, US, Japan, and Europe (landed), 1973-to date; petroleum consumption by industrial countries, 1973-to date; USSR crude oil production, 1974-to date; Free World and US nuclear generation capacity, 1973-to date. Data are supplied specifically for the US on US gross imports of crude oil and products, 1973-to date; landed cost of Saudi crude in current and 1974 dollars; US trade in bituminous coal, 1973-to date; summary of US merchandise trade, 1976-to date; and energy/GNP ratio.

Bauer, E.K. (ed.)

1981-02-01T23:59:59.000Z

446

1991 international petroleum encyclopedia  

SciTech Connect (OSTI)

There is no other petroleum industry publication quite like the International Petroleum Encyclopedia. With a timely, accurate combination of global industry coverage and analysis, detailed statistical surveys, cutting-edge reports on technological advancements and the ever-popular atlas maps, the 1991 International Petroleum Encyclopedia is a smart buy for professionals whose business is oil and gas, as well as for those whose business is affected by the industry's trends and developments. Written by a professional staff of Oil and Gas Journal petroleum experts, the 1991 IPE gives you the all important global perspective for constructing sound business strategies for the 90's. The petroleum industry is scrambling for information that will help it survive this volitile period. This book reports on the topics in the petroleum industry the latest developments in horizontal drilling, world refining (the latest information on reformulated fuels), and predictions about the post-war Persian Gulf industry. PULS, discussions on changes in the Gulf of Mexico, developments in the LNG trade, and crude oil tanker supply/.demand curves.

Not Available

1991-01-01T23:59:59.000Z

447

DOE - Office of Legacy Management -- International Minerals and Chemical  

Office of Legacy Management (LM)

International Minerals and Chemical International Minerals and Chemical Corp - Pilot Plant - FL 02 FUSRAP Considered Sites Site: International Minerals and Chemical Corp - Pilot Plant (FL.02) Designated Name: Not Designated Alternate Name: None Location: Mulberry , Florida FL.02-1 Evaluation Year: 1985 FL.02-2 Site Operations: Erected and operated a pilot plant to process material from the leached zone of the Florida pebble phosphate field for the recovery of uranium and other saleable products and also conducted experimental investigations to recover uranium from phosphates. FL.02-3 FL.02-4 Site Disposition: Eliminated - No Authority FL.02-6 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium FL.02-3 FL.02-4 Radiological Survey(s): Yes FL.02-1

448

Institute of Design Institute of Design  

E-Print Network [OSTI]

Institute of Design Institute of Design 350 N. LaSalle St. Chicago, IL 60610 312.595.4900 design The Institute of Design has continuously explored emerg- ing ideas about how design interacts with society languages and use of new media and material. The school was renamed the Institute of Design (ID) in 1944

Heller, Barbara

449

The design of a compact integral medium size PWR : the CIRIS  

E-Print Network [OSTI]

The International Reactor Innovative and Secure (IRIS) is an advanced medium size, modular integral light water reactor design, rated currently at 1000 MWt. IRIS design has been under development by over 20 organizations ...

Shirvan, Koroush

2010-01-01T23:59:59.000Z

450

SP.722 D-Lab: Development, Design and Dissemination, Spring 2005  

E-Print Network [OSTI]

D-Lab: Development, Design and Dissemination is a design studio course in which students work on international development projects for underserved communities. The class is focused on a participatory, iterative ...

Smith, Amy J.

451

ENHANCING MARKETING WITH ENGINEERING: OPTIMAL PRODUCT LINE DESIGN FOR HETEROGENEOUS MARKETS  

E-Print Network [OSTI]

ENHANCING MARKETING WITH ENGINEERING: OPTIMAL PRODUCT LINE DESIGN FOR HETEROGENEOUS MARKETS Jeremy Engineering University of Michigan Summer 2010 Forthcoming in International Journal of Research in Marketing of Business. #12;- 1 - ENHANCING MARKETING WITH ENGINEERING: OPTIMAL PRODUCT LINE DESIGN FOR HETEROGENEOUS

Papalambros, Panos

452

Stars at the Tip of Peculiar Elephant Trunk-Like Clouds in IC 1848E: A Possible Third Mechanism of Triggered Star Formation  

E-Print Network [OSTI]

The HII region IC 1848 harbors a lot of intricate elephant trunk-like structures that look morphologically different from usual bright-rimmed clouds (BRCs). Of particular interest is a concentration of thin and long elephant trunk-like structures in the southeastern part of IC 1848E. Some of them have an apparently associated star (or two stars) at their very tip. We conducted $VI_{c}$ photometry of several of these stars. Their positions on the $V/(V-I_{c})$ color-magnitude diagram as well as the physical parameters obtained by SED fittings indicate that they are low-mass pre-main-sequence stars having ages of mostly one Myr or less. This strongly suggests that they formed from elongated, elephant trunk-like clouds. We presume that such elephant trunk-like structures are genetically different from BRCs, on the basis of the differences in morphology, size distributions, and the ages of the associated young stars. We suspect that those clouds have been caused by hydrodynamical instability of the ionization/sho...

Chauhan, Neelam; Pandey, Anil K; Samal, Manash R; Bhatt, Bhuwan C

2011-01-01T23:59:59.000Z

453

INTERNAL REPAIR OF PIPELINES  

SciTech Connect (OSTI)

The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. In lieu of a field installation on an abandoned pipeline, a preliminary nondestructive testing protocol is being developed to determine the success or failure of the fiber-reinforced liner pipeline repairs. Optimization and validation activities for carbon-fiber repair methods are ongoing.

Bill Bruce; Nancy Porter; George Ritter; Matt Boring; Mark Lozev; Ian Harris; Bill Mohr; Dennis Harwig; Robin Gordon; Chris Neary; Mike Sullivan

2005-07-20T23:59:59.000Z

454

INTERNAL REPAIR OF PIPELINES  

SciTech Connect (OSTI)

The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway crossings. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. The first round of optimization and validation activities for carbon-fiber repairs are complete. Development of a comprehensive test plan for this process is recommended for use in the field trial portion of this program.

Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

2004-12-31T23:59:59.000Z

455

INTERNAL REPAIR OF PIPELINES  

SciTech Connect (OSTI)

The two broad categories of fiber-reinforced composite liner repair and deposited weld metal repair technologies were reviewed and evaluated for potential application for internal repair of gas transmission pipelines. Both are used to some extent for other applications and could be further developed for internal, local, structural repair of gas transmission pipelines. Principal conclusions from a survey of natural gas transmission industry pipeline operators can be summarized in terms of the following performance requirements for internal repair: (1) Use of internal repair is most attractive for river crossings, under other bodies of water, in difficult soil conditions, under highways, under congested intersections, and under railway. (2) Internal pipe repair offers a strong potential advantage to the high cost of horizontal direct drilling when a new bore must be created to solve a leak or other problem. (3) Typical travel distances can be divided into three distinct groups: up to 305 m (1,000 ft.); between 305 m and 610 m (1,000 ft. and 2,000 ft.); and beyond 914 m (3,000 ft.). All three groups require pig-based systems. A despooled umbilical system would suffice for the first two groups which represents 81% of survey respondents. The third group would require an onboard self-contained power unit for propulsion and welding/liner repair energy needs. (4) The most common size range for 80% to 90% of operators surveyed is 508 mm (20 in.) to 762 mm (30 in.), with 95% using 558.8 mm (22 in.) pipe. Evaluation trials were conducted on pipe sections with simulated corrosion damage repaired with glass fiber-reinforced composite liners, carbon fiber-reinforced composite liners, and weld deposition. Additional un-repaired pipe sections were evaluated in the virgin condition and with simulated damage. Hydrostatic failure pressures for pipe sections repaired with glass fiber-reinforced composite liner were only marginally greater than that of pipe sections without liners, indicating that this type of liner is only marginally effective at restoring the pressure containing capabilities of pipelines. Failure pressures for larger diameter pipe repaired with a semi-circular patch of carbon fiber-reinforced composite lines were also marginally greater than that of a pipe section with un-repaired simulated damage without a liner. These results indicate that fiber reinforced composite liners have the potential to increase the burst pressure of pipe sections with external damage Carbon fiber based liners are viewed as more promising than glass fiber based liners because of the potential for more closely matching the mechanical properties of steel. Pipe repaired with weld deposition failed at pressures lower than that of un-repaired pipe in both the virgin and damaged conditions, indicating that this repair technology is less effective at restoring the pressure containing capability of pipe than a carbon fiber-reinforced liner repair. Physical testing indicates that carbon fiber-reinforced liner repair is the most promising technology evaluated to-date. Development of a comprehensive test plan for this process is recommended for use in the field trial portion of this program.

Robin Gordon; Bill Bruce; Ian Harris; Dennis Harwig; George Ritter; Bill Mohr; Matt Boring; Nancy Porter; Mike Sullivan; Chris Neary

2004-08-17T23:59:59.000Z

456

Future Earth: International Coordination of Research for Global  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Future Earth: International Coordination of Research for Global Sustainability Print E-mail Future Earth: International Coordination of Research for Global Sustainability Print E-mail Monday, January 28, 2013 On Saturday, February 16, 2013 from 1:30-4:30pm the American Association for the Advancement of Science (AAAS) will be holding a symposium to present Future Earth, a new 10-year international initiative on integrated global environmental change research. Future Earth is mobilizing the global scientific community, funders, and users of research to define together and address the most pressing research questions on sustainable development and its integrated environmental, social, and economic dimensions. This includes strengthened links between science, policy, and society. The discussion on February 16th will address international coordination of research and funding; co-designing research with funders, scientists, and users; and the role of science in bridging to policy and practice. For more information about the symposium please click here

457

Loads Providing Ancillary Services: Review of International Experience |  

Broader source: Energy.gov (indexed) [DOE]

Loads Providing Ancillary Services: Review of International Loads Providing Ancillary Services: Review of International Experience Loads Providing Ancillary Services: Review of International Experience In this study, we examine the arrangements for and experiences of end-use loads providing ancillary services (AS) in five electricity markets: Australia, the United Kingdom (UK), the Nordic market, and the ERCOT and PJM markets in the United States. Our objective in undertaking this review of international experience was to identify specific approaches or market designs that have enabled customer loads to effectively deliver various ancillary services (AS) products. We hope that this report will contribute to the ongoing discussion in the U.S. and elsewhere regarding what institutional and technical developments are needed to ensure that

458

Loads Providing Ancillary Services: Review of International Experience |  

Broader source: Energy.gov (indexed) [DOE]

Loads Providing Ancillary Services: Review of International Loads Providing Ancillary Services: Review of International Experience Loads Providing Ancillary Services: Review of International Experience In this study, we examine the arrangements for and experiences of end-use loads providing ancillary services (AS) in five electricity markets: Australia, the United Kingdom (UK), the Nordic market, and the ERCOT and PJM markets in the United States. Our objective in undertaking this review of international experience was to identify specific approaches or market designs that have enabled customer loads to effectively deliver various ancillary services (AS) products. We hope that this report will contribute to the ongoing discussion in the U.S. and elsewhere regarding what institutional and technical developments are needed to ensure that

459

International Nuclear Energy Research Initiative: 2011 Annual Report |  

Broader source: Energy.gov (indexed) [DOE]

1 Annual 1 Annual Report International Nuclear Energy Research Initiative: 2011 Annual Report Fiscal year (FY) 2011 marks the ten-year anniversary of the founding of the International Nuclear Energy Research Initiative, or I-NERI. Designed to foster international partnerships that address key issues affecting the future global use of nuclear energy, I-NERI is perhaps even more relevant today than at its establishment. In the face of increasing energy demands coupled with clean energy imperatives, we must clear the hurdles to expanding the role of nuclear power in our energy portfolio. And in an increasingly global society, the importance of international cooperation in these efforts has escalated. For ten years, I-NERI has been a vehicle for establishing bilateral

460

PETROLEUM ENGINEERING With an international reputation for preparing students for  

E-Print Network [OSTI]

PETROLEUM ENGINEERING With an international reputation for preparing students for successful entry into the petroleum industry, the graduate program in petroleum engineering at Texas Tech gives students a competitive design, and petroleum engineering software. The department is located in a geographical area

Gelfond, Michael

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Fiber optic hydrophone sensor arrays using low reflectance internal mirrors  

E-Print Network [OSTI]

A new design of fiber optic hydrophone sensor arrays phics. using low reflectance internal mirrors in optical fibers is investigated. The mirrors are produced by fusion arc splicing of two fibers, one of which has a thin film of TiO2 on the end. A...

Lee, Jong-Seo

2012-06-07T23:59:59.000Z

462

2014 International and Western States In-Place Recycling Conference  

E-Print Network [OSTI]

2014 International and Western States In-Place Recycling Conference August 5­7, 2014 Denver and the road to revitalizing in-place recycling technologies. · Join this prestigious forum especially designed/research agencies to discuss the status of in-place recycling. · Experience what we know today for each form of in

463

2011-2012 International Programs Report College of Architecture  

E-Print Network [OSTI]

2011-2012 International Programs Report College of Architecture COA Quick Look Number of Students Abroad 92 Top Locations Italy & Greece India UK China Majors Architecture - 43 Building Construction - 12 City Planning -15 Industrial Design - 17 Undeclared- 5 Academic Year 2011-2012 Collge of Architecture

Weber, Rodney

464

Formula Hybrid International Competition  

E-Print Network [OSTI]

Jack Ratta Media Center Acceleration Runs NASCAR Oval - Main Straight Tech. Inspection North Garage:00 4:00 5:00 6:00 7:00 8:00 9:00 Design Finals Group Photo NASCAR Oval - Main Straight Barbeque Hosted of the hybrid gasoline engine, there are more components to a hybrid drivetrain, including the electric motor

Carver, Jeffrey C.

465

Water distillation using waste engine heat from an internal combustion engine  

E-Print Network [OSTI]

To meet the needs of forward deployed soldiers and disaster relief personnel, a mobile water distillation system was designed and tested. This system uses waste engine heat from the exhaust flow of an internal combustion ...

Mears, Kevin S

2006-01-01T23:59:59.000Z

466

Introduction of Break-Out Session at the International PV Module Quality Assurance Forum (Presentation)  

SciTech Connect (OSTI)

This presentation outlines review requirements for quality assurance (QA) rating systems, logical design of QA systems, and specific tasks for break-out session 1 of the 2011 International PV Module Quality Assurance Forum.

Kurtz, S.; Wohlgemuth, J.; Yamamichi, M.; Sample, T.

2011-07-01T23:59:59.000Z

467

Modeling the structural behavior of the piston rings under different boundary conditions in internal combustion engines  

E-Print Network [OSTI]

In the process of designing internal combustion engine, piston ring plays an important role in fulfilling the requirements of camber gas sealing, friction reduction and lubrication oil consumption. The goal of this thesis ...

Xu, Dian

2010-01-01T23:59:59.000Z

468

Improving Cost-effectiveness and Facilitating Participation of Developing Countries in International Emissions Trading  

Science Journals Connector (OSTI)

This paper discusses ways in which the next climate agreement – a renegotiated Kyoto Protocol or a second-period agreement – can be made more cost-effective. The discussion focuses on the design of international

Peter Bohm

2002-01-01T23:59:59.000Z

469

Material System Thermomechanics Interactions (cont'd) International Collaboration: Role / Impact / Recognition  

E-Print Network [OSTI]

& Mass Transfer, Fusion Technology, and Fusion Engineering & Design (based mostly on Ph.D. thesisMaterial System Thermomechanics Interactions (cont'd) · International Collaboration: Role / Impact scholarly journal papers in 3 years in the Journal of Nuclear Materials, International Journal of Heat

Abdou, Mohamed

470

International Symposium on Fusion Nuclear Technology (ISFNT-5) SAFETY ISSUES ASSOCIATED WITH MOBILIZED ACTIVATION  

E-Print Network [OSTI]

International Symposium on Fusion Nuclear Technology (ISFNT-5) SAFETY ISSUES ASSOCIATED;International Symposium on Fusion Nuclear Technology (ISFNT-5) heat from in-vessel systems with high neutron Symposium on Fusion Nuclear Technology (ISFNT-5) A design must adequately transfer heat from plasma

California at Los Angeles, University of

471

International Energy Outlook 2006  

Gasoline and Diesel Fuel Update (EIA)

Graphic Data Graphic Data International Energy Outlook 2006 Figure 1. World Marketed Energy Consumption by Region, 1980-2030 Figure 1 Data. Need help, contact the National Energy Information Center at 202-586-8800. Figure 2. World Delivered Energy Consumption by End-Use Sector, 2003-2030 Figure 2 Data. Need help, contact the National Energy Information Center at 202-586-8800. Figure 3. World Marketed Energy Use by Energy Type, 1980-2030 Figure 3 Data. Need help, contact the National Energy Information Center at 202-586-8800. Figure 4. Fuel Shares of World Marketed Energy Use, 2003, 2015, and 2030 Figure 4 Data. Need help, contact the National Energy Information Center at 202-586-8800. Figure 5. World Energy Consumption for Electricity Generation by Fuel Type, 2003, 2015, and 2030 Figure 5 Data. Need help, contact the National Energy Information Center at 202-586-8800.

472

International Energy Outlook - Coal  

Gasoline and Diesel Fuel Update (EIA)

Coal Coal International Energy Outlook 2004 Coal Although coal use is expected to be displaced by natural gas in some parts of the world, only a slight drop in its share of total energy consumption is projected by 2025. Coal continues to dominate fuel markets in developing Asia. Figure 52. World Coal Consumption, 1970-2025. Need help, call the National Energy Information Center at 202-586-8800. Figure Data Figure 53. Coal Share of World Energy Consumption by Sector, 2001 and 2025. Need help, call the National Energy Information Center at 202-586-8800. Figure Data Figure 54. Coal Share of Regional Energy Consumption, 1970-2025. Need help, call the National Energy Information Center at 202-586-8800. Figure Data World coal consumption has been in a period of generally slow growth since

473

International Energy Outlook 2007  

Gasoline and Diesel Fuel Update (EIA)

Coal Coal In the IEO2007 reference case, world coal consumption increases by 74 percent from 2004 to 2030, international coal trade increases by 44 percent from 2005 to 2030, and coal's share of world energy consumption increases from 26 percent in 2004 to 28 percent in 2030. In the IEO2007 reference case, world coal consumption increases by 74 percent over the projection period, from 114.4 quadrillion Btu in 2004 to 199.0 quadrillion Btu in 2030 (Figure 54). Coal consumption increases by 2.6 per- cent per year on average from 2004 to 2015, then slows to an average increase of 1.8 percent annually from 2015 to 2030. World GDP and primary energy consumption also grow more rapidly in the first half than in the second half of the projections, reflecting a gradual slowdown of economic growth in non-OECD Asia. Regionally, increased use of coal in non-OECD

474

International Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Coal Coal Although coal use is expected to be displaced by natural gas in some parts of the world, only a slight drop in its share of total energy consumption is projected by 2025. Coal continues to dominate many national fuel markets in developing Asia. World coal consumption has been in a period of generally slow growth since the late 1980s, a trend that is projected to continue. Although total world consumption of coal in 2001, at 5.26 billion short tons,12 was more than 27 percent higher than the total in 1980, it was 1 percent below the 1989 peak of 5.31 billion short tons (Figure 56). The International Energy Outlook 2003 (IEO2003) reference case projects some growth in coal use between 2001 and 2025, at an average annual rate of 1.5 percent (on a tonnage basis), but with considerable variation among regions.

475

International Energy Outlook 2004  

Gasoline and Diesel Fuel Update (EIA)

4) 4) I n t e r n a t i o n a l E n e r g y O u t l o o k 2 0 0 4 April 2004 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. This publication is on the WEB at: www.eia.doe.gov/oiaf/ieo/index.html. Contacts The International Energy Outlook is prepared by the Energy Information Administration (EIA). General questions concerning the contents of the report should be referred to Mary J. Hutzler (202/586-2222),

476

International Agreements Comments  

Broader source: Energy.gov (indexed) [DOE]

ITRATIOAL ITRATIOAL AGREE MENT~S/ MITMES SEREARY SAME W. BDAN JANUARY 205-EEME 2008o Page 1 of 1 Matthews, Carol From: Morman, Laurie Sent: Monday, November 24, 2008 2:52 PM To: Nicoll, Eric; Matthews, Carol Subject: RE: MOU's and Agreements Attachments: Agreements - 1979 to Present.pdf Here's on electronic version of what PI provided............. From: Nicoll, Eric Sent: Monday, November 24, 2008 11:40 AM To: Morman, Laurie; Kolb, Ingrid; Matthews, Carol Subject: RE: MOU's and Agreements OK then we will not include the ones which have come up here. Thanks. Did they organize it by year? From: Morman, Laurie Sent: Monday, November 24, 2008 11:38 AM To: Nicoll, Eric; Kolb, Ingrid; Matthews, Carol Subject: RE: MOU's and Agreements PI has already provided the International agreements.

477

International Energy Outlook 2007  

Gasoline and Diesel Fuel Update (EIA)

7) 7) I n t e r n a t i o n a l E n e r g y O u t l o o k 2 0 0 7 May 2007 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. This publication is on the WEB at: www.eia.doe.gov/oiaf/ieo/index.html. Contacts The International Energy Outlook is prepared by the Ener- gy Information Administration (EIA). General questions concerning the contents of the report should be referred to John J. Conti, Director, Office of

478

International Energy Outlook 2006  

Gasoline and Diesel Fuel Update (EIA)

The IEO2006 projections indicate continued growth in world energy use, despite The IEO2006 projections indicate continued growth in world energy use, despite world oil prices that are 35 percent higher in 2025 than projected in last year's outlook. Energy resources are thought to be adequate to support the growth expected through 2030. The International Energy Outlook 2006 (IEO2006) projects strong growth for worldwide energy demand over the 27-year projection period from 2003 to 2030. Despite world oil prices that are 35 percent higher in 2025 than projected in last year's outlook, world economic growth continues to increase at an average annual rate of 3.8 percent over the projection period, driving the robust increase in world energy use. Total world consumption of marketed energy expands from 421 quadrillion Brit- ish thermal units (Btu) in 2003 to 563 quadrillion Btu in 2015 and then to 722 quadrillion Btu in

479

International Energy Outlook 2006  

Gasoline and Diesel Fuel Update (EIA)

Comparisons With Other Forecasts, and Performance of Past IEO Forecasts for 1990, 1995, and 2000 Forecast Comparisons Energy Consumption by Region Three organizations provide forecasts comparable with the projections in IEO2006, which extend to 2030 for the first time. The International Energy Agency (IEA) pro- vides "business as usual" projections to 2030 in its World Energy Outlook 2004; Petroleum Economics, Ltd. (PEL) publishes world energy projections to 2025; and Petro- leum Industry Research Associates (PIRA) provides projections to 2020. For comparison, 2002 is used as the base year for all the projections. Comparisons between IEO2006 and IEO2005 extend only to 2025, the last year of the IEO2005 projections. Regional breakouts vary among the different projec- tions, complicating the comparisons. For example, IEO2006, PIRA, and IEA

480

Internal Program Review  

Broader source: Energy.gov (indexed) [DOE]

Synchrophasor Initiative (NASPI) and Synchrophasor Initiative (NASPI) and Advanced Applications Research & Development (AARD) Internal Program Review 27-28 June 2013 Washington, DC Joe Eto Lawrence Berkeley National Lab DOE/OE Transmission Reliability Program 2 Management Review Topics  Project objective  Major technical accomplishments that will be completed this year  Deliverables and schedule for activities to be completed under FY13 funding  Risk factors affecting timely completion of planned activities as well as movement through RD&D cycle  Early thoughts on follow-on work that should be considered for funding in FY14 3 Management Review Issues  RD&D stage of the project: - Theoretical study-proof of concept - Modeling/simulation-using real data?

Note: This page contains sample records for the topic "design ic internal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

International Energy Outlook 2006  

Gasoline and Diesel Fuel Update (EIA)

System for the Analysis of Global Energy Markets (SAGE) System for the Analysis of Global Energy Markets (SAGE) The projections of world energy consumption appearing in IEO2006 are based on EIA's international energy modeling tool, SAGE. SAGE is an integrated set of regional models that provide a technology-rich basis for estimating regional energy consumption. For each region, reference case estimates of 42 end-use energy service demands (e.g., car, commercial truck, and heavy truck road travel; residential lighting; steam heat requirements in the paper industry) are developed on the basis of economic and demographic projections. Pro- jections of energy consumption to meet the energy demands are estimated on the basis of each region's existing energy use patterns, the existing stock of energy-using equipment, and the characteristics of available new technologies, as well as new sources of primary energy supply.

482

International Energy Outlook 2006  

Gasoline and Diesel Fuel Update (EIA)

6) 6) I n t e r n a t i o n a l E n e r g y O u t l o o k 2 0 0 6 June 2006 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. This publication is on the WEB at: www.eia.doe.gov/oiaf/ieo/index.html. Contacts The International Energy Outlook is prepared by the Ener- gy Information Administration (EIA). General questions concerning the contents of the report should be referred to John J. Conti (john.conti@eia.doe.gov,

483

International Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Natural Gas Natural gas is the fastest growing primary energy source in the IEO2003 forecast. Consumption of natural gas is projected to nearly double between 2001 and 2025, with the most robust growth in demand expected among the developing nations. Natural gas is expected to be the fastest growing component of world primary energy consumption in the International Energy Outlook 2003 (IEO2003) reference case. Consumption of natural gas worldwide is projected to increase by an average of 2.8 percent annually from 2001 to 2025, compared with projected annual growth rates of 1.8 percent for oil consumption and 1.5 percent for coal. Natural gas consumption in 2025, at 176 trillion cubic feet, is projected to be nearly double the 2001 total of 90 trillion cubic feet (Figure 40). The natural gas share of total energy consumption is projected to increase from 23 percent in 2001 to 28 percent in 2025.

484

International Energy Outlook 2006  

Gasoline and Diesel Fuel Update (EIA)

energy consumption is projected to increase by 71 percent from 2003 to 2030. energy consumption is projected to increase by 71 percent from 2003 to 2030. Fossil fuels continue to supply much of the energy used worldwide, and oil remains the dominant energy source. In the International Energy Outlook 2006 (IEO2006) ref- erence case, world marketed energy consumption increases on average by 2.0 percent per year from 2003 to 2030. Although world oil prices in the reference case, which remain between $47 and $59 per barrel (in real 2004 dollars), dampen the growth in demand for oil, total world energy use continues to increase as a result of robust economic growth. Worldwide, total energy use grows from 421 quadrillion British thermal units (Btu) in 2003 to 563 quadrillion Btu in 2015 and 722 quadrillion Btu in 2030 (Figure 1). The most rapid growth in energy demand from 2003 to 2030 is projected for nations outside the Organization

485

Florida International University | .EDUconnections  

Office of Scientific and Technical Information (OSTI)

Spotlight Archive Spotlight Archive Contact Florida International University Professors and Faculty of Interest Prof. Osama Mohammed receives IEEE Energy Conversion Award Prof. Osama Mohammed receives IEEE Energy Conversion Award Prof. Madhavan Nair's groundbreading research may lead to new hope in the battle Prof. Madhavan Nair's groundbreading research may lead to new hope in the battle against Neuro-AIDS Asst. Prof. Vagelis Hristidis awarded Google Research Award Asst. Prof. Vagelis Hristidis awarded Google Research Award Exceptional Students and Alumnus DOE Fellow Duriem Calderin on his way to DOE's Hanford Site DOE Fellow Duriem Calderin on his way to DOE's Hanford Site DOE Fellow, Rosa Ramirez hired by DOE's Environmental Management Professional De DOE Fellow, Rosa Ramirez hired by DOE's Environmental Management Professional Development Corps

486

International Energy Outlook 1998  

Gasoline and Diesel Fuel Update (EIA)

Highlights Highlights Growth in energy use is projected worldwide through 2020. The demand for electricity in homes, business, and industry is growing in all regions, as is the demand for petroleum-powered personal transportation. The International Energy Outlook 1998 (IEO98) reference case forecast indicates that by 2020, the world will consume three times the energy it consumed 28 years ago in 1970 (Figure 2). Much of the projected growth in energy consumption is attributed to expectations of rapid increases in energy use in the developing world—especially in Asia. Although the economic downturn in Asia that began in mid-1997 and continues into 1998 has lowered expectations for near-term growth in the region, the forecast still suggests that almost half the world’s projected increase in energy

487

International Energy Outlook 2003  

Gasoline and Diesel Fuel Update (EIA)

3) 3) I n t e r n a t i o n a l E n e r g y O u t l o o k 2 0 0 3 May 2003 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. This publication is on the WEB at: www.eia.doe.gov/oiaf/ieo/index.html. Contacts The International Energy Outlook is prepared by the Energy Information Administration (EIA). General questions concerning the contents of the report should be referred to Mary J. Hutzler (202/586-2222), Director,

488

International Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Highlights Highlights International Energy Outlook 2004 Highlights World energy consumption is projected to increase by 54 percent from 2001 to 2025. Much of the growth in worldwide energy use is expected in the developing world in the IEO2004 reference case forecast. Figure 2. World Marketed Energy Consumption, 1970-2025 (Quadrillion Btu). Having Problems, call the National Energy Information Center at 202-586-8600. Figure Data Figure 3. World Marketed Energy Consumption by Region, 1970-2025 (Quadrillion Btu). Having problems, call the National Energy Information Center at 202-586-8600. Figure Data Figure 4. Comparison of 2003 and 2004 World Oil Price Projections, 1970-2025 (2002 Dollars per Barrel). Figure Data Figure 5. World Marketed Energy Consumption by Energy Source, 1970-2025 (Quadrilliion Btu). Need help, call the National Energy Information Center at 202-596-8600.

489

International Energy Outlook 2008  

Gasoline and Diesel Fuel Update (EIA)

8) 8) I n t e r n a t i o n a l E n e r g y O u t l o o k 2 0 0 8 September 2008 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or of any other organization. This publication is on the WEB at: www.eia.doe.gov/oiaf/ieo/index.html. Contacts The International Energy Outlook is prepared by the Ener- gy Information Administration (EIA). General questions concerning the contents of the report should be referred to John J. Conti, Director, Office

490

seventh international cough symposium  

E-Print Network [OSTI]

Twenty six papers were presented as posters in the Seventh International Symposium on Cough; 12 papers were presented in the Basic Science of Cough session, and 14 papers presented in the Clinical Science of Cough session. These papers explored a wide spectrum of cough-related areas including pathophysiological mechanisms, treatment and detection of cough, and symptom assessment and perception, and were grouped into several general themes for facilitate the discussion. Studies presented in these posters have provided new information that should improve our knowledge on the basic physiology and pharmacology of cough, and the peripheral and central neural mechanisms involved in the generation of the cough motor pattern. In addition, in the clinical science section, studies reporting potential new anti-tussive agents and further characterisation of cough symptoms and perception have provided a base for the fruitful strategies for the development of novel anti-tussive therapies and cough management.

Peter V Dicpinigaitis; Giovanni A Fontana; Lu-yuan Lee; Milos Tatar

491

International District Energy Association  

Broader source: Energy.gov [DOE]

Since its formation in 1909, the International District Energy Association (IDEA) has served as a principal industry advocate and management resource for owners, operators, developers, and suppliers of district heating and cooling systems in cities, campuses, bases, and healthcare facilities. Today, with over 1,400 members in 26 countries, IDEA continues to organize high-quality technical conferences that inform, connect, and advance the industry toward higher energy efficiency and lower carbon emissions through innovation and investment in scalable sustainable solutions. With the support of DOE, IDEA performs industry research and market analysis to foster high impact projects and help transform the U.S. energy industry. IDEA was an active participant in the original Vision and Roadmap process and has continued to partner with DOE on combined heat and power (CHP) efforts across the country.

492

international | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

International Activity in Gasification and Coal to Liquids Development News Gasifipedia Gasifier Optimization Feed Systems Syngas Processing Systems Analyses Gasification Plant...

493

International Quality Assurance Standards (Presentation)  

SciTech Connect (OSTI)

Tests to make quantitative predictions about photovoltaic (PV) modules are needed. This presentation proposes the creation of international quality assurance standards for PV modules.

Kurtz, S.; Hacke, P.; Wohlgemuth, J.; Kempe, M.; Yamamichi, M.

2011-02-01T23:59:59.000Z

494

European Union Internal Energy Market.  

E-Print Network [OSTI]

??This project is based on the investigations of internal energy market which is one of the common European strategies contributing for creation of more secure… (more)

Gulbinaite Simona, Leonaite Augustina

2014-01-01T23:59:59.000Z

495

International Marine Renewable Energy Conference  

Broader source: Energy.gov [DOE]

The International Marine Renewable Energy Conference (IMREC) offers researchers, technology developers, policy makers, NGOs, and industry representatives the opportunity to discuss financing...

496

Honeywell International ESCO Qualification Sheet  

Broader source: Energy.gov [DOE]

Document outlines the energy service company (ESCO) qualifications for Honeywell International in relation to the U.S. Department of Energy's (DOEs) energy savings performance contracts (ESPC).

497

Master of Arts in International Tourism International Tourism  

E-Print Network [OSTI]

Master of Arts in International Tourism International Tourism Goals and Contents Having developed very rapidly in recent decades, interna- tional tourism has become one of the world economy's major industries. The World Travel and Tourism Council projects that between now and 2013, the tourism

Krause, Rolf

498

Design Editorial A Design Societies Federation  

E-Print Network [OSTI]

Journal of Mechanical Design Editorial A Design Societies Federation You can recognize the many faces of design by looking at the many different professional societies that promote design around the world. These societies may have roots in engineering or archi- tecture or industrial design but they all

Papalambros, Panos

499

International Spin Physics 2014 Summary  

E-Print Network [OSTI]

The Stern-Gerlach experiment and the origin of electron spin are described in historical context. SPIN 2014 occurs on the fortieth anniversary of the first International High Energy Spin Physics Symposium at Argonne in 1974. A brief history of the international spin conference series is presented.

Milner, Richard G

2015-01-01T23:59:59.000Z

500

International Spin Physics 2014 Summary  

E-Print Network [OSTI]

The Stern-Gerlach experiment and the origin of electron spin are described in historical context. SPIN 2014 occurs on the fortieth anniversary of the first International High Energy Spin Physics Symposium at Argonne in 1974. A brief history of the international spin conference series is presented.

Richard G. Milner

2015-02-06T23:59:59.000Z