Powered by Deep Web Technologies
Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Matrix Acidizing Core Flooding Apparatus: Equipment and Procedure Description  

E-Print Network (OSTI)

Core flooding is a commonly used experimental procedure in the petroleum industry. It involves pressurizing a reservoir rock and flowing fluid through it in the laboratory. The cylindrical rock, called a core, can be cut from the reservoir during a separate core drilling operation or a formation outcrop. A core flooding apparatus suitable for matrix acidizing was designed and assembled. Matrix acidizing is a stimulation technique in which hydrochloric acid (HCl) is injected down the wellbore below formation fracture pressure to dissolve carbonate (CaCO3) rock creating high permeability streaks called wormholes. The main components of the apparatus include a continuous flow syringe pump, three core holders, a hydraulic hand pump, two accumulators, a back pressure regulator, and two pressure transducers connected through a series of tubing and valves. Due to the corrosive nature of the acid, the apparatus features Hastelloy which is a corrosion resistant metal alloy. Another substantial feature of the apparatus is the ability to apply 3000psi back pressure. This is the pressure necessary to keep CO2, a product of the CaCO3 and HCl reaction, in solution at elevated temperatures. To perform experiments at temperature, the core holder is wrapped with heating tape and surrounded by insulation. Tubing is wrapped around a heating band with insulation to heat the fluid before it enters the core. A LabVIEW graphical programming code was written to control heaters as well as record temperature and pressure drop across the core. Other considerations for the design include minimizing footprint, operational ease by the user, vertical placement of the accumulators and core holders to minimize gravity effects, and air release valves. Core floods can be performed at varying injection rates, temperatures and pressures up to 5000psi and 250 degF. The apparatus can handle small core plugs, 1’’ diameter X 1’’ length, up to 4’’ X 20’’ cores. The equipment description includes the purpose, relevant features, and connections to the system for each component. Finally documented is the procedure to run a core flooding test to determine permeability and inject acid complete with an analysis of pressure response data.

Grabski, Elizabeth 1985-

2012-12-01T23:59:59.000Z

2

HUMAN RELIABILITY ANALYSIS FOR COMPUTERIZED PROCEDURES  

SciTech Connect

This paper provides a characterization of human reliability analysis (HRA) issues for computerized procedures in nuclear power plant control rooms. It is beyond the scope of this paper to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper provides a review of HRA as applied to traditional paper-based procedures, followed by a discussion of what specific factors should additionally be considered in HRAs for computerized procedures. Performance shaping factors and failure modes unique to computerized procedures are highlighted. Since there is no definitive guide to HRA for paper-based procedures, this paper also serves to clarify the existing guidance on paper-based procedures before delving into the unique aspects of computerized procedures.

Ronald L. Boring; David I. Gertman; Katya Le Blanc

2011-09-01T23:59:59.000Z

3

Analysis of agent-based systems using decision procedures  

E-Print Network (OSTI)

In recent years, model checking has emerged as a remarkably e ective technique for the automated analysis of descriptions of hardware systems and communication protocols. To analyze software system descriptions, however, a direct application of model checking rarely succeeds [1, 3], since these descriptions often have huge (often in nite) state spaces which are not amenable to the nite-state methods of model checking. More important, the computation of a xpoint (the hallmark of the model checking approach) is not always needed in practice for the veri cation of an interesting class of properties, viz, properties that are invariantly true in all reachable states or transitions of the system. To establish a property asaninvariant, an induction proof, suitably augmented with automatically generated lemmas, often su ces. Language). To establish a formula as an invariant without any user guidance Salsa carries out an induction proof that utilizes tightly integrated decision procedures, currently a combination of BDD algorithms and a constraint solver for

Ramesh Bharadwaj

2001-01-01T23:59:59.000Z

4

Screening Analysis : Volume 1, Description and Conclusions.  

DOE Green Energy (OSTI)

The SOR consists of three analytical phases leading to a Draft EIS. The first phase Pilot Analysis, was performed for the purpose of testing the decision analysis methodology being used in the SOR. The Pilot Analysis is described later in this chapter. The second phase, Screening Analysis, examines all possible operating alternatives using a simplified analytical approach. It is described in detail in this and the next chapter. This document also presents the results of screening. The final phase, Full-Scale Analysis, will be documented in the Draft EIS and is intended to evaluate comprehensively the few, best alternatives arising from the screening analysis. The purpose of screening is to analyze a wide variety of differing ways of operating the Columbia River system to test the reaction of the system to change. The many alternatives considered reflect the range of needs and requirements of the various river users and interests in the Columbia River Basin. While some of the alternatives might be viewed as extreme, the information gained from the analysis is useful in highlighting issues and conflicts in meeting operating objectives. Screening is also intended to develop a broad technical basis for evaluation including regional experts and to begin developing an evaluation capability for each river use that will support full-scale analysis. Finally, screening provides a logical method for examining all possible options and reaching a decision on a few alternatives worthy of full-scale analysis. An organizational structure was developed and staffed to manage and execute the SOR, specifically during the screening phase and the upcoming full-scale analysis phase. The organization involves ten technical work groups, each representing a particular river use. Several other groups exist to oversee or support the efforts of the work groups.

Bonneville Power Administration; Corps of Engineers; Bureau of Reclamation

1992-08-01T23:59:59.000Z

5

Data Validation Procedure for Chemical Analysis  

E-Print Network (OSTI)

This report has been reproduced from the best available copy. Available in paper copy and microfiche. Available for a process ing fee to U.S. Department of Energy and its contractors from: U.S. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062 (865) 576-8401 fax: (865) 576-5728 email: reports@adonis.osti.gov online ordering: http://www.doe.gov/bridge Available for sale to the public, in paper, from: U.S. Department of Commerce National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 (800) 553-6847 fax: (703) 605.6900 email: orders@ntis.fedworld.gov online ordering: http://www.ntis.gov/ordering.htm Printed in the United States of America DISCLM-5.CHP (11/99) BHI-01435 Rev. 0 Data Validation Procedure for Chemical Analysis Author

Uhsduhg Ir Uhsduhg

2000-01-01T23:59:59.000Z

6

The Scope of Turing's Analysis of Effective Procedures  

Science Conference Proceedings (OSTI)

Turing's (1936) analysis of effective symbolic procedures is a model of conceptual clarity that plays an essential role in the philosophy of mathematics. Yet appeal is often made to the effectiveness of human procedures in other areas of philosophy. ... Keywords: Turing machine, decision problem, effective procedure, epistemic procedure, philosophy of computation

Jeremy Seligman

2002-05-01T23:59:59.000Z

7

Operating procedures: Fusion Experiments Analysis Facility  

SciTech Connect

The Fusion Experiments Analysis Facility (FEAF) is a computer facility based on a DEC VAX 11/780 computer. It became operational in late 1982. At that time two manuals were written to aid users and staff in their interactions with the facility. This manual is designed as a reference to assist the FEAF staff in carrying out their responsibilities. It is meant to supplement equipment and software manuals supplied by the vendors. Also this manual provides the FEAF staff with a set of consistent, written guidelines for the daily operation of the facility.

Lerche, R.A.; Carey, R.W.

1984-03-20T23:59:59.000Z

8

Current Human Reliability Analysis Methods Applied to Computerized Procedures  

SciTech Connect

Computerized procedures (CPs) are an emerging technology within nuclear power plant control rooms. While CPs have been implemented internationally in advanced control rooms, to date no US nuclear power plant has implemented CPs in its main control room (Fink et al., 2009). Yet, CPs are a reality of new plant builds and are an area of considerable interest to existing plants, which see advantages in terms of enhanced ease of use and easier records management by omitting the need for updating hardcopy procedures. The overall intent of this paper is to provide a characterization of human reliability analysis (HRA) issues for computerized procedures. It is beyond the scope of this document to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper serves as a review of current HRA as it may be used for the analysis and review of computerized procedures.

Ronald L. Boring

2012-06-01T23:59:59.000Z

9

Analysis Procedure And Equipment For Deep Geoelectrical Soundings In Noisy  

Open Energy Info (EERE)

Analysis Procedure And Equipment For Deep Geoelectrical Soundings In Noisy Analysis Procedure And Equipment For Deep Geoelectrical Soundings In Noisy Areas Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Analysis Procedure And Equipment For Deep Geoelectrical Soundings In Noisy Areas Details Activities (0) Areas (0) Regions (0) Abstract: This paper discusses the problem involved in extracting the useful signal from background noise during geoelectrical soundings in noisy areas or where a considerable depth of penetration is required. This problem often arises in geothermal volcanic areas where the exploration target is a low resistivity formation and high resistivity surface rocks generally prevent the energization of the soil by strong currents. The spectral characteristics of the signal and noise are discussed, along with

10

Environmental Quality Information Analysis Center (EQIAC) operating procedures handbook  

SciTech Connect

The Operating Procedures Handbook of the Environmental Quality Information Analysis Center (EQIAC) is intended to be kept current as EQIAC develops and evolves. Its purpose is to provide a comprehensive guide to the mission, infrastructure, functions, and operational procedures of EQIAC. The handbook is a training tool for new personnel and a reference manual for existing personnel. The handbook will be distributed throughout EQIAC and maintained in binders containing current dated editions of the individual sections. The handbook will be revised at least annually to reflect the current structure and operational procedures of EQIAC. The EQIAC provides information on environmental issues such as compliance, restoration, and environmental monitoring do the Air Force and DOD contractors.

Walsh, T.E. [Florida Univ., Gainesville, FL (United States); Das, S. [Oak Ridge National Lab., TN (United States)

1992-08-01T23:59:59.000Z

11

Accurate LPG analysis begins with sampling procedures, equipment  

SciTech Connect

Proper equipment and procedures are essential for obtaining representative samples from an LPG stream. This paper discusses how sampling of light liquid hydrocarbons generally involves one of two methods: flow- proportional composite sampling by a mechanical device or physical transfer of hydrocarbon fluids from a flowing pipeline or other source into a suitable portable sample container. If sampling by proper techniques and equipment supports careful chromatographic analysis, full advantage of accurate mass measurement of LPG can be realized.

Wilkins, C.M. (Koch Pipelines, Inc., Medford, OK (US))

1990-11-05T23:59:59.000Z

12

Whole-House Energy Analysis Procedures for Existing Homes: Preprint  

SciTech Connect

This paper describes a proposed set of guidelines for analyzing the energy savings achieved by a package of retrofits or an extensive rehabilitation of an existing home. It also describes certain field test and audit methods that can help establish accurate building system performance characteristics that are needed for a meaningful simulation of whole-house energy use. Several sets of default efficiency values have been developed for older appliances that cannot be easily tested and for which published specifications are not readily available. These proposed analysis procedures are documented more comprehensively in NREL Technical Report TP-550-38238.

Hendron, R.

2006-08-01T23:59:59.000Z

13

Analysis and Experiments with a Slow-Start Procedure  

Science Conference Proceedings (OSTI)

Slow-start procedures were developed decades ago in order to provide a smoother evolution in numerical simulations performed with three-time-level integration schemes. The advantages of a slow start versus a conventional forward start should ...

Harold Ritchie; Anne-Marie Leduc

1994-04-01T23:59:59.000Z

14

Description, field test and data analysis of a controlled-source EM system (EM-60). [Leach Hot Springs, Grass Valley  

DOE Green Energy (OSTI)

The three sections describe the transmitter, the receiver, and data interpretations and indicate the advances made toward the development of a large moment electromagnetic (EM) system employing a magnetic dipole source. A brief description is given of the EM-60 transmitter, its general design, and the consideration involved in the selection of a practical coil size and weight for routine field operations. A programmable, multichannel, multi-frequency, phase-sensitive receiver is described. A field test of the EM-60, the data analysis and interpretation procedures, and a comparison between the survey results and the results obtained using other electrical techniques are presented. The Leach Hot Springs area in Grass Valley, Pershing County, Nevada, was chosen for the first field site at which the entire system would be tested. The field tests showed the system capable of obtaining well-defined sounding curves (amplitude and phase of magnetic fields) from 1 kHz down to 0.1 Hz. (MHR)

Morrison, H.F.; Goldstein, N.E.; Hoversten, M.; Oppliger, G.; Riveros, C.

1978-10-01T23:59:59.000Z

15

An R&D Project Management and Selection System for the Utilization Technology Branch, Division of Geothermal Energy, Volume III - Project Selection Procedure and Benefit/Cost Analysis  

DOE Green Energy (OSTI)

This report in three volumes describes an R and D project management and selection system developed for the Utilization Technology Branch of the Division of Geothermal Energy, Department of Energy. The proposed project management system (PMS) consists of a project data system (PDS) and a project selection procedure (PSP). The project data system consists of a series of project data forms and project status logs, and descriptions of information pathways. The PDS emphasizes timely monitoring of the technical and financial progress of projects, maintenance of the history of the project and rapid access to project information to facilitate responsive reporting to DGE and DOE Upper Management. The project selection procedure emphasizes a R and D product-oriented approach to benefit/cost analysis of individual projects. The report includes: (a) a description of the system, and recommendations for its implementation, (b) the PDS forms and explanation of their use, (c) a glossary of terms for use on the forms, (d) a description of the benefit/cost approach, (e) a data base for estimating R and D benefits, and (f) examples of test applications of the system to nine current DGE projects. This volume describes a proposed procedure for R and D project selection. The benefit/cost analysis part of the procedure estimates financial savings expected to result from the commercial use of hardware or process products of R and D. Savings are estimated with respect to the geothermal power plants expected to come on line between 1978 and 2000.

Dhillon, Harpal S.; Entingh, Daniel J.

1978-05-01T23:59:59.000Z

16

Automated methods of textual content analysis and description of text structures  

E-Print Network (OSTI)

Universal Semantic Language (USL) is a semi-formalized approach for the description of knowledge (a knowledge representation tool). The idea of USL was introduced by Vladimir Smetacek in the system called SEMAN which was used for keyword extraction tasks in the former Information centre of the Czechoslovak Republic. However due to the dissolution of the centre in early 90's, the system has been lost. This thesis reintroduces the idea of USL in a new context of quantitative content analysis. First we introduce the historical background and the problems of semantics and knowledge representation, semes, semantic fields, semantic primes and universals. The basic methodology of content analysis studies is illustrated on the example of three content analysis tools and we describe the architecture of a new system. The application was built specifically for USL discovery but it can work also in the context of classical content analysis. It contains Natural Language Processing (NLP) components and employs the algorith...

Chýla, Roman

17

HUMAN RELIABILITY ANALYSIS FOR COMPUTERIZED PROCEDURES, PART TWO: APPLICABILITY OF CURRENT METHODS  

SciTech Connect

Computerized procedures (CPs) are an emerging technology within nuclear power plant control rooms. While CPs have been implemented internationally in advanced control rooms, to date no U.S. nuclear power plant has implemented CPs in its main control room. Yet, CPs are a reality of new plant builds and are an area of considerable interest to existing plants, which see advantages in terms of easier records management by omitting the need for updating hardcopy procedures. The overall intent of this paper is to provide a characterization of human reliability analysis (HRA) issues for computerized procedures. It is beyond the scope of this document to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper serves as a review of current HRA as it may be used for the analysis and review of computerized procedures.

Ronald L. Boring; David I. Gertman

2012-10-01T23:59:59.000Z

18

CONSIDERATIONS FOR THE TREATMENT OF COMPUTERIZED PROCEDURES IN HUMAN RELIABILITY ANALYSIS  

SciTech Connect

Computerized procedures (CPs) are an emerging technology within nuclear power plant control rooms. While CPs have been implemented internationally in advanced control rooms, to date no US nuclear power plant has implemented CPs in its main control room. Yet, CPs are a reality of new plant builds and are an area of considerable interest to existing plants, which see advantages in terms of easier records management by omitting the need for updating hardcopy procedures. The overall intent of this paper is to provide a characterization of human reliability analysis (HRA) issues for computerized procedures. It is beyond the scope of this document to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper serves as a review of current HRA as it may be used for the analysis and review of computerized procedures.

Ronald L. Boring; David I. Gertman

2012-07-01T23:59:59.000Z

19

Sampling and Analysis Procedures for Gas, Condensate, Brine, and Solids: Pleasant Bayou Well Test, 1988-Present  

Science Conference Proceedings (OSTI)

This section covers analyses performed on gas. Chemical analyses can only be related to well performance if the quantity of the various fluids are known. The IGT on-line data computer system measures the flowrate, the pressures, and the temperatures every 10 seconds. These values are automatically recorded over operator selected intervals both on magnetic media and on paper. This allows review of samples versus operating conditions. This paper covers analyses performed on gas, including: An approximate sampling schedule during flow tests; On-site sample handling and storage of gas samples; Addresses of laboratories that perform off site analyses; Sample shipping instructions; Data archiving; and Quality Control/Quality Assurance. It is expected that the above procedures will change as the flow test progresses, but deviations from the written procedures should be approved by C. Hayden of IGT and noted on the results of the analysis.

Hayden, Chris

1988-01-01T23:59:59.000Z

20

Processes and Procedures for Application of CFD to Nuclear Reactor Safety Analysis  

SciTech Connect

Traditionally, nuclear reactor safety analysis has been performed using systems analysis codes such as RELAP5, which was developed at the INL. However, goals established by the Generation IV program, especially the desire to increase efficiency, has lead to an increase in operating temperatures for the reactors. This increase pushes reactor materials to operate towards their upper temperature limits relative to structural integrity. Because there will be some finite variation of the power density in the reactor core, there will be a potential for local hot spots to occur in the reactor vessel. Hence, it has become apparent that detailed analysis will be required to ensure that local ‘hot spots’ do not exceed safety limits. It is generally accepted that computational fluid dynamics (CFD) codes are intrinsically capable of simulating fluid dynamics and heat transport locally because they are based on ‘first principles.’ Indeed, CFD analysis has reached a fairly mature level of development, including the commercial level. However, CFD experts are aware that even though commercial codes are capable of simulating local fluid and thermal physics, great care must be taken in their application to avoid errors caused by such things as inappropriate grid meshing, low-order discretization schemes, lack of iterative convergence and inaccurate time-stepping. Just as important is the choice of a turbulence model for turbulent flow simulation. Turbulence models model the effects of turbulent transport of mass, momentum and energy, but are not necessarily applicable for wide ranges of flow types. Therefore, there is a well-recognized need to establish practices and procedures for the proper application of CFD to simulate flow physics accurately and establish the level of uncertainty of such computations. The present document represents contributions of CFD experts on what the basic practices, procedures and guidelines should be to aid CFD analysts to obtain accurate estimates of the flow and energy transport as applied to nuclear reactor safety. However, it is expected that these practices and procedures will require updating from time to time as research and development affect them or replace them with better procedures. The practices and procedures are categorized into five groups. These are: 1.Code Verification 2.Code and Calculation Documentation 3.Reduction of Numerical Error 4.Quantification of Numerical Uncertainty (Calculation Verification) 5.Calculation Validation. These five categories have been identified from procedures currently required of CFD simulations such as those required for publication of a paper in the ASME Journal of Fluids Engineering and from the literature such as Roache [1998]. Code verification refers to the demonstration that the equations of fluid and energy transport have been correctly coded in the CFD code. Code and calculation documentation simply means that the equations and their discretizations, etc., and boundary and initial conditions used to pose the fluid flow problem are fully described in available documentation. Reduction of numerical error refers to practices and procedures to lower numerical errors to negligible or very low levels as is reasonably possible (such as avoiding use of first-order discretizations). The quantification of numerical uncertainty is also known as calculation verification. This means that estimates are made of numerical error to allow the characterization of the numerical

Richard W. Johnson; Richard R. Schultz; Patrick J. Roache; Ismail B. Celik; William D. Pointer; Yassin A. Hassan

2006-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Testbed Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Testbed Description R&D Overview 100G Testbed Testbed Description Testbed Results Current Testbed Research Proposal Process Terms and Conditions Virtual Circuits (OSCARS)...

22

A limited assessment of the ASEP human reliability analysis procedure using simulator examination results  

Science Conference Proceedings (OSTI)

This report presents a limited assessment of the conservatism of the Accident Sequence Evaluation Program (ASEP) human reliability analysis (HRA) procedure described in NUREG/CR-4772. In particular, the, ASEP post-accident, post-diagnosis, nominal HRA procedure is assessed within the context of an individual`s performance of critical tasks on the simulator portion of requalification examinations administered to nuclear power plant operators. An assessment of the degree to which operator perforn:Lance during simulator examinations is an accurate reflection of operator performance during actual accident conditions was outside the scope of work for this project; therefore, no direct inference can be made from this report about such performance. The data for this study are derived from simulator examination reports from the NRC requalification examination cycle. A total of 4071 critical tasks were identified, of which 45 had been failed. The ASEP procedure was used to estimate human error probability (HEP) values for critical tasks, and the HEP results were compared with the failure rates observed in the examinations. The ASEP procedure was applied by PNL operator license examiners who supplemented the limited information in the examination reports with expert judgment based upon their extensive simulator examination experience. ASEP analyses were performed for a sample of 162 critical tasks selected randomly from the 4071, and the results were used to characterize the entire population. ASEP analyses were also performed for all of the 45 failed critical tasks. Two tests were performed to assess the bias of the ASEP HEPs compared with the data from the requalification examinations. The first compared the average of the ASEP HEP values with the fraction of the population actually failed and it found a statistically significant factor of two bias on the average.

Gore, B.R.; Dukelow, J.S. Jr.; Mitts, T.M.; Nicholson, W.L. [Pacific Northwest Lab., Richland, WA (United States)

1995-10-01T23:59:59.000Z

23

A practical method for incorporating Real Options analysis into US federal benefit-cost analysis procedures  

E-Print Network (OSTI)

This research identifies how Real Options (RO) thinking might acceptably and effectively complement the current mandates for Benefit-Cost Analysis (BCA) defined by the Office of Management and Budget (OMB) in Circular A-94. ...

Rivey, Darren

2007-01-01T23:59:59.000Z

24

Accepted to Energy Policy, December 2011. A generic framework for the description and analysis of  

E-Print Network (OSTI)

Accepted to Energy Policy, December 2011. ERG/201104 A generic framework for the description policies. The framework can be employed to capture the evolution of energy security in an energy system associated with the system's constituent processes. Energy security policies are treated as flows

Hughes, Larry

25

Development of a simplified thermal analysis procedure for insulating glass units  

E-Print Network (OSTI)

A percentage of insulating glass (IG) units break each year due to thermally induced perimeter stresses. The glass industry has known about this problem for many years and an ASTM standard has recently been developed for the design of monolithic glass plates for thermal stresses induced by solar irradiance. It is believed that a similar standard can be developed for IG units if a proper understanding of IG thermal stresses can be developed. The objective of this research is to improve understandings of IG thermal stresses and compare the IG thermal stresses with those that develop in monolithic glass plates given similar environmental conditions. The major difference between the analysis of a monolithic glass plate and an IG unit is energy exchange due to conduction, natural convection, and long wave radiation through the gas space cavity. In IG units, conduction, natural convection, and long wave radiation combine in a nonlinear fashion that frequently requires iterative numerical analyses for determining thermal stresses in certain situations. To simplify the gas space energy exchange, a numerical propagation procedure was developed. The numerical propagation procedure combines the nonlinear effects of conduction, natural convection, and long wave radiation into a single value. Use of this single value closely approximates the nonlinear nature of the gas space energy exchange and simplifies the numerical analysis. The numerical propagation procedure was then coupled with finite element analysis to estimate thermal stresses for both monolithic glass plates and IG units. It is shown that the maximum thermal stresses that develop in IG units increase linearly with input solar irradiance during the transient phase. It is shown that an initial preload stress develops under equilibrium conditions due to the thermal bridge effects of the spacer. It is shown that IG units develop larger thermal stresses than monolithic glass plates under similar environmental conditions. Finally, it is shown that the use of low-e coatings increase IG thermal stresses and that the location of low-e coating as well as environmental conditions affect which glass plate develops larger thermal stresses.

Klam, Jeremy Wayne

2007-08-01T23:59:59.000Z

26

Solar Pilot Plant, Phase I. Preliminary design report. Volume II. System description and system analysis. CDRL item 2  

DOE Green Energy (OSTI)

Honeywell conducted a parametric analysis of the 10-MW(e) solar pilot plant requirements and expected performance and established an optimum system design. The main analytical simulation tools were the optical (ray trace) and the dynamic simulation models. These are described in detail in Books 2 and 3 of this volume under separate cover. In making design decisions, available performance and cost data were used to provide a design reflecting the overall requirements and economics of a commercial-scale plant. This volume contains a description of this analysis/design process and resultant system/subsystem design and performance.

None

1977-05-01T23:59:59.000Z

27

A New Statistical–Dynamical Downscaling Procedure Based on EOF Analysis for Regional Time Series Generation  

Science Conference Proceedings (OSTI)

A new statistical–dynamical downscaling procedure is developed and then applied to high-resolution (regional) time series generation and wind resource assessment. The statistical module of the new procedure uses empirical orthogonal function (EOF) ...

Yosvany Martinez; Wei Yu; Hai Lin

2013-04-01T23:59:59.000Z

28

Computer image analysis of seed shape and seed color for flax cultivar description  

Science Conference Proceedings (OSTI)

We applied computer image analysis to group together flax cultivars (Linum usitatissimum L.) according to their similarity in commercially important dry seed traits. Both the seed shape and seed-color traits were tested on 53 cultivars from world germplasm ... Keywords: Agro-biodiversity preservation, Computer image analysis, Flax cultivar clustering, Flax seed descriptors, Hierarchical clustering, Multivariate analysis, Principal component analysis, Seed color, Seed shape

Wiesnerová Dana; Wiesner Ivo

2008-05-01T23:59:59.000Z

29

Precipitation over Northern Italy: A Description by Means of Principal component Analysis  

Science Conference Proceedings (OSTI)

Principal component analysis is used to study the rainfall distribution over northern Italy in the cold season (October-April). A spatial analysis is applied to the squares roots of daily data, recorded in 14 months, and of their 3- and 5-day ...

Franco Molteni; Paolo Bonelli; Pietro Bacci

1983-10-01T23:59:59.000Z

30

A Chemical Study of Oils and Fats of Animal OriginChapter 1 Definitions of Concepts and Description of the Elemental Analysis of Organic Compounds  

Science Conference Proceedings (OSTI)

A Chemical Study of Oils and Fats of Animal Origin Chapter 1 Definitions of Concepts and Description of the Elemental Analysis of Organic Compounds Food Science eChapters Food Science & Technology Press Downloadable pdf...

31

Stone Description  

Science Conference Proceedings (OSTI)

United States, Minnesota, Sandstone, Jordan, 9RA33, 26687, y, Front Face (South), Dscf0282.jpg. No 9RA33 is: Description. buff. rust-spotted. fine grain ...

32

Analysis and comparison of active solar desiccant and absorption cooling systems. Part 1; Model description  

DOE Green Energy (OSTI)

A comparative analysis has been performed to compare the cooling and dehumidification performance of future ventilation-mode desiccant systems, proposed advanced absorption systems, and conventional vapor compression systems. A common framework has been developed for direct comparison of these different cooling technologies; this method is described in this paper.

Warren, M.L. (ASI Controls, San Ramon, CA (US)); Wahlig, M. (Lawrence Berkeley Lab., CA (USA). Applied Science Div.)

1991-02-01T23:59:59.000Z

33

Performance-Based Technology Selection Filter description report. INEL Buried Waste Integrated Demonstration System Analysis project  

SciTech Connect

A formal methodology has been developed for identifying technology gaps and assessing innovative or postulated technologies for inclusion in proposed Buried Waste Integrated Demonstration (BWID) remediation systems. Called the Performance-Based Technology Selection Filter, the methodology provides a formalized selection process where technologies and systems are rated and assessments made based on performance measures, and regulatory and technical requirements. The results are auditable, and can be validated with field data. This analysis methodology will be applied to the remedial action of transuranic contaminated waste pits and trenches buried at the Idaho National Engineering Laboratory (INEL).

O`Brien, M.C.; Morrison, J.L.; Morneau, R.A.; Rudin, M.J.; Richardson, J.G.

1992-05-01T23:59:59.000Z

34

Model documentation of the Short-Term Coal Analysis System. Volume 2. Model description. [SCOAL  

Science Conference Proceedings (OSTI)

This is the second of three volumes of documentation for the Short-Term Coal Analysis System (SCOAL) developed by the Coal Data Analysis and Forecasting Branch, Office of Coal, Nuclear, Electric, and Alternate Fuels. The principal aim of SCOAL is to project on a quarterly basis the likely contribution of each of the 26 major bituminous coal, lignite, and anthracite producing states to total US production. A secondary objective is to estimate a companion demand-side aggregated by region but disaggregated by end-use sector. In its current use, the two sides are operated in tandem, and serve to cross-validate each other by means of tracking market balances. The purposes of this report are to describe the estimation method, results, and performance evaluation criteria that were deemed relevant in assessing the potential predictive performance of SCOAL's statistically fitted relationships and to discuss the pre- and post-estimation considerations that prevailed over the course of mode development. The single equation parameter estimates, associated significance levels, statistical equation performance measures, and general comments regarding SCOAL's supply and demand side equations are presented.

Not Available

1983-04-01T23:59:59.000Z

35

THE APPLICATION OF THE SXF LATTICE DESCRIPTION AND THE UAL SOFTWARE ENVIRONMENT TO THE ANALYSIS OF THE LHC.  

SciTech Connect

A software environment for accelerator modeling has been developed which includes the UAL (Unified Accelerator Library), a collection of accelerator physics libraries with a Per1 interface for scripting, and the SXF (Standard eXchange Format), a format for accelerator description which extends the MAD sequence by including deviations from design values. SXF interfaces have been written for several programs, including MAD9 and MAD8 via the doom database, Cosy, TevLat and UAL itself, which includes Teapot++. After an overview of the software we describe the application of the tools to the analysis of the LHC lattice stability, in the presence of alignment and coupling errors, and to the correction of the first turn and closed orbit in the machine.

FISCHER,W.; PILAT,F.; PTITSON,V.

1999-03-29T23:59:59.000Z

36

Stone Description  

Science Conference Proceedings (OSTI)

United States, New York, Limestone, Sandy Hill, 8RA6, 26828, y, Front Face (South), Dscf0268_6.jpg. No 8RA6 is: Description. dark gray. fine grain. ...

37

Property:FieldProcedures | Open Energy Information  

Open Energy Info (EERE)

FieldProcedures FieldProcedures Jump to: navigation, search Property Name FieldProcedures Property Type Text Description Description of actions, equipment and footprint of the exploration activity Subproperties This property has the following 39 subproperties: A Active Seismic Techniques Airborne Gravity Survey Audio-Magnetotellurics C Controlled Source Audio MT Cross-Dipole Acoustic Log D DC Resistivity Survey (Dipole-Dipole Array) DC Resistivity Survey (Mise-Á-La-Masse) DC Resistivity Survey (Pole-Dipole Array) DC Resistivity Survey (Schlumberger Array) DC Resistivity Survey (Wenner Array) Development Drilling Direct-Current Resistivity Survey Drilling Techniques E Earth Tidal Analysis Electrical Profiling Configurations Electromagnetic Techniques Exploration Drilling F FMI Log Frequency-Domain Electromagnetic Survey

38

Portable microcomputer for the analysis of plutonium gamma-ray spectra. Volume II. Software description and listings. [IAEAPU  

SciTech Connect

A portable microcomputer has been developed and programmed for the International Atomic Energy Agency (IAEA) to perform in-field analysis of plutonium gamma-ray spectra. The unit includes a 16-bit LSI-11/2 microprocessor, 32-K words of memory, a 20-character display for user prompting, a numeric keyboard for user responses, and a 20-character thermal printer for hard-copy output of results. The unit weights 11 kg and has dimensions of 33.5 x 30.5 x 23.0 cm. This compactness allows the unit to be stored under an airline seat. Only the positions of the 148-keV /sup 241/Pu and 208-keV /sup 237/U peaks are required for spectral analysis that gives plutonium isotopic ratios and weight percent abundances. Volume I of this report provides a detailed description of the data analysis methodology, operation instructions, hardware, and maintenance and troubleshooting. Volume II describes the software and provides software listings.

Ruhter, W.D.

1984-05-01T23:59:59.000Z

39

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description Discover E (Engineering) is an evening of interesting, interactive and fun engineering, science, math, and technology demonstrations for K-12 students and their parents or guardians. It is held in conjunction with National Engineers Week which is celebrated at the time of George Washington's birthday, our nation's first President, who was a military engineer and land surveyor. Activities include 30-50 interactive demonstrations of basic engineering, science, technology and math principles that may include robots, reverse engineering, casting, crystal structures, forensic science, the effects of liquid nitrogen, slide rule, sound waves, electrostatics, mechanics, materials properties and materials

40

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National Laboratory. * teaches modern geophysical exploration techniques: seismic reflection and refraction, gravity and magnetics, electromagnetics (including magnetotellurics), and electrical resistivity * involves extensive hands-on field experience * integrates geophysical methods to solve real

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Economics definitions, methods, models, and analysis procedures for Homeland Security applications.  

SciTech Connect

This report gives an overview of the types of economic methodologies and models used by Sandia economists in their consequence analysis work for the National Infrastructure Simulation&Analysis Center and other DHS programs. It describes the three primary resolutions at which analysis is conducted (microeconomic, mesoeconomic, and macroeconomic), the tools used at these three levels (from data analysis to internally developed and publicly available tools), and how they are used individually and in concert with each other and other infrastructure tools.

Ehlen, Mark Andrew; Loose, Verne William; Vargas, Vanessa N.; Smith, Braeton J.; Warren, Drake E.; Downes, Paula Sue; Eidson, Eric D.; Mackey, Greg Edward

2010-01-01T23:59:59.000Z

42

Overview of validation procedures for building energy-analysis simulation codes. [SUNCAT 2. 4, DEROB 4, DOE 2. 1, BLAST  

SciTech Connect

SERI is developing a procedure for the validation of Building Energy Analysis Simulation Codes (BEAS). These codes are being used increasingly in the building design process, both directly and as the basis for simplified design tools and guidelines. The importance of the validity of the BEAS in predicting building energy performance is obvious when one considers the money and energy which could be wasted by energy-inefficient designs. However, to date, little or no systematic effort has been made to ensure the validity of the various BEAS. The validation work at SERI consists of three distinct parts: Comparative Study, Analytical Verification, and Empirical Validation. The procedures have been developed for the first two parts, and these procedures have been implemented on a sampling of the major BEAS. Results from this work have shown major problems in two of the BEAS tested. Furthermore, when one building design was run on several of the BEAS, there were large differences in the predicted annual heating loads. The empirical validation procedure will be developed when high quality empirical data become available.

Wortman, D.; O' Doherty, B.; Judkoff, R.

1981-03-01T23:59:59.000Z

43

Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Description Project Description The Energy Policy Act of 2005 (EPAct 2005), the Energy Independence and Security Act of 2007 (EISA 2007), and Presidential Executive Order 13423 all contain requirements for Federal facilities to decrease energy consumption and increase the use of renewable energy by the year 2015. To provide leadership in meeting these requirements, DOE, in partnership with the General Services Administration (GSA), has installed a rooftop solar electric, or PV, system on the roof of DOE's headquarters in Washington, D.C. The 205 kilowatt (kW) installation is one of the largest of its kind in the Nation's capital. A display in the For- restal building will show the power output of the PV system during the day and the energy produced over

44

Test procedure forms for sludge retrieval and packaging  

SciTech Connect

This document provides test procedure forms for sludge retrieval and packaging tests in the 305 Cold Test Facility. The completed and approved forms provide all descriptions, criteria and analysis to safely perform sludge equipment tests in the 305 Cold Test Facility.

Feigenbutz, L.V.

1994-09-27T23:59:59.000Z

45

Problem Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Description Description Model Domain 2-D Radial Grid System : 1000 m x 60 m 25 m 25 m 10 m Hydrate Zone 1000 m Shale Shale Discretization Model 1 (200 x 30) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 30 cells (5 x 5 m, 20 x 0.5 m, 5 x 5 m) Model 2 (200 x 11) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 11 cells (5 x 5 m, 1 x 10.0 m, 5 x 5 m) Model 3 (50 x 30) r direction : 50 cells logarithmically distributed from r w = 0.10795 m to r 50 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls")

46

Fossil Power Plant Components Failure Analysis Guideline, Volume 3: Steps and Procedures  

Science Conference Proceedings (OSTI)

A key ingredient in managing and ensuring the integrity of aging fossil-fueled electric power-generating assets is proper understanding of the root causes of failures when they occur. The execution of a failure analysis is critical to this understanding and consequent decision making to prevent recurrent or future failures of a like kind. In an effort to provide its members with the tools to more efficiently perform a failure analysis, the Electric Power Research Institute (EPRI) initiated a project to p...

2011-09-29T23:59:59.000Z

47

Chemical analysis and sampling techniques for geothermal fluids and gases at the Fenton Hill Laboratory  

DOE Green Energy (OSTI)

A general description of methods, techniques, and apparatus used for the sampling, chemical analysis, and data reporting of geothermal gases and fluids is given. Step-by-step descriptions of the procedures are included in the appendixes.

Trujillo, P.E.; Counce, D.; Grigsby, C.O.; Goff, F.; Shevenell, L.

1987-06-01T23:59:59.000Z

48

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

M. Maniyar

2004-06-22T23:59:59.000Z

49

Emergency Procedures  

Energy.gov (U.S. Department of Energy (DOE))

Note: This page is pending deletion, please refer to the Safety and health main page for emergency procedure information:

50

A Discussion of Procedures and Equipment for the Comprehensive Test Ban Treaty On-Site Inspection Environmental Sampling and Analysis  

SciTech Connect

This paper is intended to serve as a scientific basis to start discussions of the available environmental sampling techniques and equipment that have been used in the past that could be considered for use within the context of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) on-site inspections (OSI). This work contains information on the techniques, equipment, costs, and some operational procedures associated with environmental sampling that have actually been used in the past by the United States for the detection of nuclear explosions. This paper also includes a discussion of issues, recommendations, and questions needing further study within the context of the sampling and analysis of aquatic materials, atmospheric gases, atmospheric particulates, vegetation, sediments and soils, fauna, and drill-back materials.

Wogman, Ned A.; Milbrath, Brian D.; Payne, Rosara F.; Seifert, Carolyn E.; Friese, Judah I.; Miley, Harry S.; Bowyer, Ted W.; Hanlen, Richard C.; Onishi, Yasuo; Hayes, James C.; Wigmosta, Mark S.

2011-02-01T23:59:59.000Z

51

Research Project Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Project Description No job description found Current Research Opportunities Regulatory Science Course Development Fellowship Health and Medical Emergency Management...

52

Uncertainty analysis routine for the Ocean Thermal Energy Conversion (OTEC) biofouling measurement device and data reduction procedure. [HTCOEF code  

DOE Green Energy (OSTI)

Biofouling and corrosion of heat exchanger surfaces in Ocean Thermal Energy Conversion (OTEC) systems may be controlling factors in the potential success of the OTEC concept. Very little is known about the nature and behavior of marine fouling films at sites potentially suitable for OTEC power plants. To facilitate the acquisition of needed data, a biofouling measurement device developed by Professor J. G. Fetkovich and his associates at Carnegie-Mellon University (CMU) has been mass produced for use by several organizations in experiments at a variety of ocean sites. The CMU device is designed to detect small changes in thermal resistance associated with the formation of marine microfouling films. An account of the work performed at the Pacific Northwest Laboratory (PNL) to develop a computerized uncertainty analysis for estimating experimental uncertainties of results obtained with the CMU biofouling measurement device and data reduction scheme is presented. The analysis program was written as a subroutine to the CMU data reduction code and provides an alternative to the CMU procedure for estimating experimental errors. The PNL code was used to analyze sample data sets taken at Keahole Point, Hawaii; St. Croix, the Virgin Islands; and at a site in the Gulf of Mexico. The uncertainties of the experimental results were found to vary considerably with the conditions under which the data were taken. For example, uncertainties of fouling factors (where fouling factor is defined as the thermal resistance of the biofouling layer) estimated from data taken on a submerged buoy at Keahole Point, Hawaii were found to be consistently within 0.00006 hr-ft/sup 2/-/sup 0/F/Btu, while corresponding values for data taken on a tugboat in the Gulf of Mexico ranged up to 0.0010 hr-ft/sup 2/-/sup 0/F/Btu. Reasons for these differences are discussed.

Bird, S.P.

1978-03-01T23:59:59.000Z

53

Estimation procedures and error analysis for inferring the total plutonium (Pu) produced by a graphite-moderated reactor  

Science Conference Proceedings (OSTI)

Graphite isotope ratio method (GIRM) is a technique that uses measurements and computer models to estimate total plutonium (Pu) production in a graphite-moderated reactor. First, isotopic ratios of trace elements in extracted graphite samples from the target reactor are measured. Then, computer models of the reactor relate those ratios to Pu production. Because Pu is controlled under nonproliferation agreements, an estimate of total Pu production is often required, and a declaration of total Pu might need to be verified through GIRM. In some cases, reactor information (such as core dimensions, coolant details, and operating history) are so well documented that computer models can predict total Pu production without the need for measurements. However, in most cases, reactor information is imperfectly known, so a measurement and model-based method such as GIRM is essential. Here, we focus on GIRM’s estimation procedure and its associated uncertainty. We illustrate a simulation strategy for a specific reactor that estimates GIRM’s uncertainty and determines which inputs contribute most to GIRM’s uncertainty, including inputs to the computer models. These models include a ‘‘local’’ code that relates isotopic ratios to the local Pu production, and a ‘‘global’’ code that predicts the Pu production shape over the entire reactor. This predicted shape is included with other 3D basis functions to provide a ‘‘hybrid basis set’’ that is used to fit the local Pu production estimates. The fitted shape can then be integrated over the entire reactor to estimate total Pu production. This GIRM evaluation provides a good example of several techniques of uncertainty analysis and introduces new reasons to fit a function using basis functions in the evaluation of the impact of uncertainty in the true 3D shape.

Heasler, Patrick G.; Burr, Tom; Reid, Bruce D.; Gesh, Christopher J.; Bayne, Charles K.

2006-10-01T23:59:59.000Z

54

An analysis of the differences between national and local coverage determinations of medical procedures in the US  

E-Print Network (OSTI)

Medicare coverage policies of medical procedures can be promulgated at a national level by the Centers of Medicare and Medicaid Services (CMS) as National Coverage Determinations (NCDs) or at a local level by Medicare ...

Díaz Treviño, Rafael

2010-01-01T23:59:59.000Z

55

A survey of temporal extensions of description logics  

Science Conference Proceedings (OSTI)

This paper surveys the temporal extensions of description logics appearearing in the literature. The analysis considers a large spectrum of approaches appearearing in the temporal description logics area: from the loosely coupled approaches – which ... Keywords: description logics, temporal logics

Alessandro Artale; Enrico Franconi

2001-03-01T23:59:59.000Z

56

Modular Accident Analysis Program, Version 5, Molten Corium–Concrete Interaction and Debris Coolability Model Enhancement Description  

Science Conference Proceedings (OSTI)

This report describes proposed enhancements to the Modular Accident Analysis Program (MAAP) molten corium–concrete interaction (MCCI) model. MAAP is a computer program that simulates the operation of light-water and heavy-water moderated nuclear power plants for both current and advanced light-water reactor designs.Engineers at Fukushima observed that water pumped into the reactor vessel rose to a certain height, but it did not rise further as more water was pumped into the reactor ...

2013-02-28T23:59:59.000Z

57

CMS Procedure  

Science Conference Proceedings (OSTI)

... Tabletop Exercise. Tailoring. Tape Management System. Technical Safeguard. Tempest. Test Plan. Test. Threat Agent. Threat Analysis. ...

2009-06-30T23:59:59.000Z

58

Comparison of acoustic impedance and time-amplitude analysis techniques for reservoir description of a Gulf of Mexico shelf edge Clastic Field  

SciTech Connect

Post-stack, time-amplitude techniques are routinely used in the estimation of reserves and the positioning of wells in low impedance, unconsolidated reservoir sands in the offshore Gulf of Mexico (Texas and Louisiana). Time amplitude analysis of 3D seismic data, when properly calibrated, can yield reliable estimates of net hydrocarbon pay, reservoir distribution, and volumetrics. Acoustic impedance (Al) analysis can also be used for such prospect appraisal and development work. However, the combined use of both techniques for reservoir description is not common. Some advantages in acoustic impedance (over amplitude analysis) are: (1) properly constrained Al traces better image the reservoir rock configuration (that is, they provide a more [open quotes]geologic[close quotes] view) thereby facilitating interpretation of reservoir distribution and interconnectivity, and (2) Al volumetrics methodology can provide more accurate estimates of average pay for reservoirs that are not seismically isolated from one another. A possible disadvantage is the difficulty in incorporating a proper baseline (low frequency) constraint for the required Al trace inversion. This paper reports the advantages and disadvantages of both techniques in characterizing net pay, volumetrics, and reservoir continuity in a producing Gulf of Mexico oil field in a shelf-edge delta depositional system.

Rowlett, H.E.; Holcombe, H.T.; Cohn, B.P.; Wilson, W.W.; Mills, W.H. (BP Exploration Inc., Houston, TX (United States))

1993-02-01T23:59:59.000Z

59

An Analysis of Potential Stream Fish and Fish Habitat Monitoring Procedures for the Inland Northwest: Annual Report 1999.  

SciTech Connect

Recent concerns over the rapid declines of native stream-fish populations in the inland Northwest have prompted the USDA Forest Service to institute interim land management practices intended to stop further declines in fish habitat quality and protect existing high quality habitat. Natural resource managers in the Inland Northwest need tools for assessing the success or failure of conservation policies and the impacts of management actions on fish and fish habitats. Effectiveness monitoring is one such potential tool, but there are currently no established monitoring protocols. Since 1991, US Forest Service biologists have used the standardized R1/R4 inventory procedures to measure fish and fish habitats on agency lands throughout the Intermountain West. The widespread use and acceptance of these standardized procedures and the large amount of data collected suggest that the R1/R4 procedures might provide the basis for an effectiveness monitoring protocol. Using fish and fish habitat data collected by Forest Service biologists, the authors assessed the efficiency of the R1/R4 procedures for monitoring stream fish and fish habitats.

Peterson, James T.; Wollrab, Sherry P.

1999-09-01T23:59:59.000Z

60

Refinement of risk analysis procedures for trichloroethylene through the use of Monte Carlo method in conjunction with physiologically based pharmacokinetic modeling. Master's thesis  

Science Conference Proceedings (OSTI)

This study refines risk analysis procedures for trichloroethylene (TCE) using a physiologically based pharmacokinetic (PBPK) model in conjunction with the Monte Carlo method. The Monte Carlo method is used to generate random sets of model parameters, based on the mean, variance, and distribution types. The procedure generates a range of exposure values for human excess lifetime cancer risk of lxl0 (exp-6), based on the upper and lower bounds and the mean of a 95% confidence interval. Risk ranges were produced for both ingestion and inhalation exposures. Results are presented in a graphical format to reduce reliance on qualitative discussions of uncertainty. A sensitivity analysis of the model was also performed. This method produced acceptable TCE exposures, for total amount TCE metabolized, greater than the Environmental Protection Agency's (EPA) by a factor of 23 for inhalation and a factor of 1.6 for ingestion. Sensitive parameters identified were the elimination rate constant, alveolar ventilation rate, and cardiac output. This procedure quantifies the uncertainty related to natural variations in parameter values. Its incorporation into risk assessment could be used to promulgate, and better present, more realistic standards.... Risk analysis, Physiologically based pharmacokinetics, Pbpk, Trichloroethylene, Monte carlo method.

Cronin, W.J.; Oswald, E.J.

1993-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Towards Service Description Logics  

Science Conference Proceedings (OSTI)

Semantic service description and matchmaking are needed in embedded and disappearing computing, cooperative multiagent systems, and the semantic web. Standard program semantics formalizations are not suited to modeling service semantics, because they ... Keywords: description logics, semantic web

Piero A. Bonatti

2002-09-01T23:59:59.000Z

62

Transient thermal analysis of PWR’s by a single-pass procedure using a simplified nodal layout  

E-Print Network (OSTI)

PWR accident conditions and analysis methods have been reviewed. Limitations of the simplified method with respect to analysis of these accident conditions are drawn and two transients ( loss of coolant flow, seized rotor) ...

Liu, Jack S. H.

1979-01-01T23:59:59.000Z

63

Project Name/Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RCA CM-3 Risk Management RCA CM-3 Risk Management Projects/Programs - RMPs, Tools, and SMEs Project Name/Description (see note below) DOE Program DOE RMP Contractor RMP Combined RMP Tools Database/Risk Analysis SMEs Federal/M&O/Consultant Integrated Biorefinery Research Facility Project EE X Research Support Facility Project EE X National Synchrotron Light Source II Project SC X 12 GeV Upgrade Project (TJL) SC X Physical Sciences Facility Project (PNNL) SC X P6, Pertmaster, Excel Mike Shay, Jason Gatelum ITER SC X (internation al pgm) P6, Pertmaster, Risk Checklist, Risk Assessor Handbook John Tapia, Colin Williams, Allen Bishop SING & SING II (SNS, OR) SC X Excel, Analytic Hierarchy, P6 Barbara Thibadeau Modernization of Lab Fac. (ORNL)

64

Three-Dimensional Descriptions Based on the Analysis of the Invariant and Quasi-Invariant Properties of Some Curved-Axis Generalized Cylinders  

Science Conference Proceedings (OSTI)

Abstract¿We address the recovery of object-level 3-D descriptions of some classes of curved-axis generalized cylinders. For this, the first part of the paper analyzes the projective properties of two common generic shapes, planar right constant generalized ... Keywords: Shape description, generalized cylinders, invariants, quasi-invariants, segmentation, grouping.

Mourad Zerroug; Ramakant Nevatia

1996-03-01T23:59:59.000Z

65

The LTS timing analysis program : user%3CU%2B2019%3Es manual and description of the methods of analysis.  

SciTech Connect

The LTS Timing Analysis program described in this report uses signals from the Tempest Lasers, Pulse Forming Lines, and Laser Spark Detectors to carry out calculations to quantify and monitor the performance of the the Z-Accelerator's laser triggered SF6 switches. The program analyzes Z-shots beginning with Z2457, when Laser Spark Detector data became available for all lines.

Armstrong, Darrell Jewell; Schwarz, Jens

2013-08-01T23:59:59.000Z

66

Mobile Energy Laboratory Procedures  

SciTech Connect

Pacific Northwest Laboratory (PNL) has been tasked to plan and implement a framework for measuring and analyzing the efficiency of on-site energy conversion, distribution, and end-use application on federal facilities as part of its overall technical support to the US Department of Energy (DOE) Federal Energy Management Program (FEMP). The Mobile Energy Laboratory (MEL) Procedures establish guidelines for specific activities performed by PNL staff. PNL provided sophisticated energy monitoring, auditing, and analysis equipment for on-site evaluation of energy use efficiency. Specially trained engineers and technicians were provided to conduct tests in a safe and efficient manner with the assistance of host facility staff and contractors. Reports were produced to describe test procedures, results, and suggested courses of action. These reports may be used to justify changes in operating procedures, maintenance efforts, system designs, or energy-using equipment. The MEL capabilities can subsequently be used to assess the results of energy conservation projects. These procedures recognize the need for centralized NM administration, test procedure development, operator training, and technical oversight. This need is evidenced by increasing requests fbr MEL use and the economies available by having trained, full-time MEL operators and near continuous MEL operation. DOE will assign new equipment and upgrade existing equipment as new capabilities are developed. The equipment and trained technicians will be made available to federal agencies that provide funding for the direct costs associated with MEL use.

Armstrong, P.R.; Batishko, C.R.; Dittmer, A.L.; Hadley, D.L.; Stoops, J.L.

1993-09-01T23:59:59.000Z

67

Equational descriptions of languages ?  

E-Print Network (OSTI)

This paper is a survey on the equational descriptions of languages. The first part is devoted to Birkhoff’s and Reiterman’s theorems on equational descriptions of varieties. Eilenberg’s variety theorem and its successive generalizations form the second part. The more recent results on equational descriptions of lattices of languages are presented in the third part of the paper. Equations have been used for a long time in mathematics to provide a concise description of various mathematical objects. This article roughly follows a historical approach to present such equational descriptions for formal languages, ranging over a period of 45 years: from Schützenberger’s characterization of star-free languages [36] to the following recent result of [18]: Every lattice of languages admits an equational description. This evolution was made possible by a gradual abstraction of the notion of equation. The story really starts in 1935 with Birkhoff’s theorem on equational

Jean-éric Pin

2012-01-01T23:59:59.000Z

68

Plan Descriptions & Summaries  

NLE Websites -- All DOE Office Websites (Extended Search)

Plan Descriptions & Summaries Retiree Insurance Plans Retiree health and welfare benefits are managed by AonHewitt and Associates. Contact Retiree Insurance Providers Plan...

69

NREL: Biomass Research - Standard Procedures for Microalgal Biofuels  

NLE Websites -- All DOE Office Websites (Extended Search)

Standard Procedures for Microalgal Biofuels Analysis Standard Procedures for Microalgal Biofuels Analysis Capabilities in Microalgal Analysis NREL's Algal Biofuels Research team can work with you to analyze the chemical composition of algae as a biomass feedstock. NREL develops laboratory analytical procedures (LAPs) for analyzing microalgal biofuels. These procedures help scientists and analysts understand more about the chemical composition of algae as a feedstock to convert to biofuels. For more procedures, see the biomass characterization LAPs. Laboratory Analytical Procedures NREL wrote these analytical procedures to help the research community analyze algae. Summative Mass Analysis of Algal Biomass - Integration of Analytical Procedures Download Procedure This procedure guides the integration of LAPs to measure algal biomass

70

Meta-analysis of Video Based Modeling Interventions for Individuals with Disabilities: Procedure, Participant, and Skill Specificity  

E-Print Network (OSTI)

The purpose of the present research was to address gaps in the video based modeling (VBM) literature through the use of meta-analytic techniques to provide clarity and specificity regarding the practical utility of VBM for participants with disabilities. Two meta-analyses of published single-case VBM research were conducted. Improvement rate difference, an effect size measure, was utilized to analyze the fifty-six single-case studies. The purpose of study one was to determine if differential effects occurred based on the type of model utilized and variations in procedural implementation. In addition, the quality of research was evaluated. The purpose of study two was to determine if participant characteristics, intervention components by participant characteristics, and targeted outcome moderated the effectiveness of video modeling with other as model (VMO). Results of Study One indicated moderate to strong effects for both VMO and video self-modeling, however, when further disaggregated based on type of model utilized, VMO with adult as model demonstrated statistically significant superiority in terms of outcome effects. Results also indicated VBM with reinforcement demonstrated greater effects than when delivered alone or as part of a package. Additionally, the evaluation of quality of research indicated a tendency of the previously published VBM research not to evaluate treatment integrity. Study Two found that age and diagnosis moderate the effectiveness of VMO, although strong effects were found across levels for both moderators. VMO was found to be more effective for elementary age participants and participants with autism spectrum disorders. Additionally, VMO with reinforcement demonstrated statistically significant stronger effects for participants with ASD than when it is delivered alone or as part of a package. However, VMO delivered as part of a package was more potent for participants with developmental disabilities. Considering targeted outcomes, the results indicated strong effects across skill areas, however, VMO was found to be most impactful when utilized to improve play skills versus other measured skills. Implications related to the practical application of VBM for individuals with disabilities particularly in regards to treatment decision making were discussed. Additionally, implications for future research were addressed.

Mason, Rose

2012-05-01T23:59:59.000Z

71

Hazard analysis of compressed natural gas fueling systems and fueling procedures used at retail gasoline service stations. Final report  

Science Conference Proceedings (OSTI)

An evaluation of the hazards associated with operations of a typical compressed natural gas (CNG) fueling station is presented. The evaluation includes identification of a typical CNG fueling system; a comparison of the typical system with ANSI/NFPA (American National Standards Institute/National Fire Protection Association) Standard 52, Compressed Natural Gas (CNG) Vehicular Fuel System, requirements; a review of CNG industry safety experience as identified in current literature; hazard identification of potential internal (CNG system-specific causes) and external (interface of co-located causes) events leading to potential accidents; and an analysis of potential accident scenarios as determined from the hazard evaluation. The study considers CNG dispensing equipment and associated equipment, including the compressor station, storate vessels, and fill pressure sensing system.

NONE

1995-04-28T23:59:59.000Z

72

?-connections of Description Logics  

E-Print Network (OSTI)

this paper is to summarize the general transfer results for E- connections that have recently been obtained in [7]. The generality of the results is due to the fact that are defined and investigated using the framework of so-called abstract description systems (ADSs), a common generalization of description logics, modal logics, logics of time and space, and many other logical formalisms [2]. Thus, we can connect not only DLs with DLs, but also, say, description logics with spatial logics [8]. A natural interpretation of link relations in this context would then be, for instance, to describe the spatial extension of abstract (DL) objects

Oliver Kutz; Carsten Lutz; Frank Wolter; Michael Zakharyaschev

2003-01-01T23:59:59.000Z

73

Processor Description Languages  

Science Conference Proceedings (OSTI)

Efficient design of embedded processors plays a critical role in embedded systems design. Processor description languages and their associated specification, exploration and rapid prototyping methodologies are used to find the best possible design for ... Keywords: Computer Architecture, Computer Science

Prabhat Mishra; Nikil Dutt

2008-05-01T23:59:59.000Z

74

B Plant facility description  

SciTech Connect

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

75

International Comparison of Energy Efficiency Criteria and Test Procedures  

NLE Websites -- All DOE Office Websites (Extended Search)

International Comparison of Energy Efficiency Criteria and Test Procedures International Comparison of Energy Efficiency Criteria and Test Procedures in Standards and Labeling Programs for Computer Monitors and Commercial Gas Stoves Title International Comparison of Energy Efficiency Criteria and Test Procedures in Standards and Labeling Programs for Computer Monitors and Commercial Gas Stoves Publication Type Report LBNL Report Number LBNL-6506E Year of Publication 2013 Authors Khanna, Nina, Nan Zhou, David Fridley, and John Romankiewicz Date Published 12/2013 Publisher Lawrence Berkeley National Laboratory Keywords Standards and labeling Abstract This report presents a technical review and comparative analysis of existing and/or proposed international mandatory energy performance standards, and voluntary and mandatory energy efficiency labels and test procedures for two products - computer monitors and commercial gas stoves - being considered for revised and new minimum energy performance standards (MEPS) in China. An overview of the scope of international programs, energy efficiency and other energy-related requirements, description and detailed summary table of criteria and procedures in major test standards are presented. In addition, an estimation of potential energy savings if China were to adopt revised MEPS comparable to international levels is provided for computer monitors. A proposed methodology for estimating potential energy savings based on the European Union experience is provided for commercial gas stoves in the absence of available sales or energy consumption data.

76

Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)  

DOE Green Energy (OSTI)

Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new credible failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.

Ermi, A.M.

1997-05-01T23:59:59.000Z

77

SNF AGING SYSTEM DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

L.L. Swanson

2005-04-06T23:59:59.000Z

78

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

79

University Location Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Location Project Description Location Project Description Boise State University Boise, Idaho Boise State University has undertaken a study of the structural setting and geothermal potential at Neal Hot Springs that will integrate geology, geochemistry, and geophysics to analyze the site on the western Snake River plain. Boise State will determine if Neal Hot Springs sustains the necessary rock dilation and conduit pathways for hydrothermal fluid flow and successful geothermal development. The result will be new data acquisition, including a deep geophysical survey and fault surface data. Colorado School of Mines Golden, Colorado Colorado School of Mines will conduct an investigation near Homedale, Idaho, an area that straddles volcanic rock and unconsolidated sediments.

80

Detailed Course Module Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Course Module Description Course Module Description Module/Learning Objectives Level of Detail in Module by Audience Consumers Gen Ed/ Community College Trades 1. Energy Issues and Building Solutions High High High Learning Objectives: * Define terms of building science, ecological systems, economics of consumption * Relate building science perspective, ecology, social science * Explain historical energy and environmental issues related to buildings * Compare Site and source energy * Examine the health, safety and comfort issues in buildings * Examine the general context for building solutions (zero energy green home with durability as the goal) * Explain a basic overview of alternative energy (total solar flux) - do we have enough energy * Examine cash flow to homeowners

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Sampling and Analysis Procedures: Boron  

Science Conference Proceedings (OSTI)

Boron is a common constituent in fly ash leachate, and accurate analytical methods are the most critical aspect related to reporting and interpretation of data about its occurrence and transport. This report outlines and discusses the most widely accepted analytical techniques for the determination of the element boron as it occurs in liquids and solids at coal combustion product (CCP) management sites.

2009-12-17T23:59:59.000Z

82

DOE-RL Integrated Safety Management System Description  

SciTech Connect

The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions.

SHOOP, D.S.

2000-09-01T23:59:59.000Z

83

Descriptive Model of Generic WAMS  

Science Conference Proceedings (OSTI)

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

84

Format for Generic Task Description  

Science Conference Proceedings (OSTI)

Task: Submitting Proposals. Containing Scenario: Fast Tracking a Battery Standard Description: Review of the proposed ...

85

Savings Analysis of Utility Bills for Unmonitored Sites, Volume I: Procedures, Results, and Discussion, Texas LoanSTAR Monitoring and Analysis Program  

E-Print Network (OSTI)

The Texas LoanSTAR program is an eight year, $98 million revolving loan program, funded by oil overcharge dollars, for energy conservation retrofits in Texas state, local government and school buildings. The program began in 1988. Public sector institutions participating in the program must repay the loans according to estimated energy savings from an energy audit. As part of this program, a statewide energy Monitoring and Analysis Program (MAP) has been established. The major objectives of the LoanSTAR MAP are to: (1) verify energy and dollar savings of the retrofits; (2) reduce energy costs by identifying operational and maintenance improvements; (3) improve retrofit selection in future rounds of the LoanSTAR program; (4) initiate a data base of energy use in institutional and commercial buildings in Texas.

Wei, G.; Eggebrecht, J.; Saman, N. F.; Claridge, D. E.

1995-01-01T23:59:59.000Z

86

Proposal Review Panel Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Review Panel Descriptions Proposal Review Panel Descriptions To ensure competent scientific review, a proposal may be assigned to a different panel (at the discretion of the Review Panel Chair), or the panel may seek additional ad hoc reviews from other experts. High-Pressure This panel reviews scattering and diffraction proposals that focus on materials at high pressure. Techniques such as (but not limited to) diffraction, nuclear resonant scattering, and inelastic x-ray scattering for materials at high pressure are appropriate for this panel to consider. Instrumentation This panel reviews proposals related to the development of beamline instrumentation, sample environments, x-ray optical components, and/or detectors that are relevant to synchrotron radiation research. This panel

87

NAICS Codes Description:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Codes Codes Description: Filters: Date Signed only show values between '10/01/2006' and '09/30/2007', Contracting Agency ID show only ('8900'), Contracting Office ID show only ('00001') Contracting Agency ID: 8900, Contracting Office ID: 00001 NAICS Code NAICS Description Actions Action Obligation 541519 OTHER COMPUTER RELATED SERVICES 251 $164,546,671 541611 ADMINISTRATIVE MANAGEMENT AND GENERAL MANAGEMENT CONSULTING SERVICES 236 $52,396,806 514210 DATA PROCESSING SERVICES 195 $28,941,727 531210 OFFICES OF REAL ESTATE AGENTS AND BROKERS 190 $6,460,652 541330 ENGINEERING SERVICES 165 $33,006,079 163 $11,515,387 541690 OTHER SCIENTIFIC AND TECHNICAL CONSULTING SERVICES 92 $40,527,088 531390 OTHER ACTIVITIES RELATED TO REAL ESTATE 79 -$659,654 337214 OFFICE FURNITURE (EXCEPT WOOD) MANUFACTURING 78 $1,651,732

88

Descriptions of Past Research  

Science Conference Proceedings (OSTI)

This product is a compilation of over one-hundred product summaries describing EPRI research performed over the previous twenty years. The summaries are arranged according to categories of generators, steam turbines, software, Technology Innovation (formerly Strategic Science and Technology) reports, and miscellaneous. Each product summary contains an abstract, a description of objective, approach, and results, and an EPRI perspective. This document is a useful reference resource for EPRI member organiza...

2006-05-19T23:59:59.000Z

89

Computerized procedures system  

DOE Patents (OSTI)

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

Lipner, Melvin H. (Monroeville, PA); Mundy, Roger A. (North Huntingdon, PA); Franusich, Michael D. (Upper St. Clair, PA)

2010-10-12T23:59:59.000Z

90

Approved Test Procedures Version 1.1 Release Notes  

E-Print Network (OSTI)

Approved Test Procedures Version 1.1 Release Notes 1 Change Reason for Change 302.a drugdrug, drug allergy In the Informative Test Description section Added clarification to the example. 302.c Problem List In the Informative Test Description section Added the sentence "The test also

91

Human factoring administrative procedures  

Science Conference Proceedings (OSTI)

In nonnuclear business, administrative procedures bring to mind such mundane topics as filing correspondence and scheduling vacation time. In the nuclear industry, on the other hand, administrative procedures play a vital role in assuring the safe operation of a facility. For some time now, industry focus has been on improving technical procedures. Significant efforts are under way to produce technical procedure requires that a validated technical, regulatory, and administrative basis be developed and that the technical process be established for each procedure. Producing usable technical procedures requires that procedure presentation be engineered to the same human factors principles used in control room design. The vital safety role of administrative procedures requires that they be just as sound, just a rigorously formulated, and documented as technical procedures. Procedure programs at the Tennessee Valley Authority and at Boston Edison's Pilgrim Station demonstrate that human factors engineering techniques can be applied effectively to technical procedures. With a few modifications, those same techniques can be used to produce more effective administrative procedures. Efforts are under way at the US Department of Energy Nuclear Weapons Complex and at some utilities (Boston Edison, for instance) to apply human factors engineering to administrative procedures: The techniques being adapted include the following.

Grider, D.A.; Sturdivant, M.H.

1991-11-01T23:59:59.000Z

92

MCO Monitoring activity description  

Science Conference Proceedings (OSTI)

Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description.

SEXTON, R.A.

1998-11-09T23:59:59.000Z

93

Federal Agency NEPA Procedures  

Energy.gov (U.S. Department of Energy (DOE))

Each Federal agency is required to develop NEPA procedures that supplement the CEQ Regulations. Developed in consultation with CEQ, Federal agency NEPA procedures must meet the standards in the CEQ...

94

EM Policies and Procedures  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Management (EM) Desktop References This page offers Environmental Management (EM) operating policies, procedures, standards, workaids, organizational charts, and...

95

A Diabatic Lagrangian Technique for the Analysis of Convective Storms. Part I: Description and validation via an observing system simulation experiment  

Science Conference Proceedings (OSTI)

A diabatic Lagrangian analysis (DLA) technique for deriving potential temperature, water vapor and cloud water mixing ratios, and virtual buoyancy from three-dimensional, time-dependent Doppler radar wind and reflectivity fields in storms is ...

Conrad L. Ziegler

96

The IAEA Coordinated Research Program on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis: Description of the Benchmark Test Cases and Phases  

SciTech Connect

The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The uncertainties in the HTR analysis tools are today typically assessed with sensitivity analysis and then a few important input uncertainties (typically based on a PIRT process) are varied in the analysis to find a spread in the parameter of importance. However, one wish to apply a more fundamental approach to determine the predictive capability and accuracies of coupled neutronics/thermal-hydraulics and depletion simulations used for reactor design and safety assessment. Today there is a broader acceptance of the use of uncertainty analysis even in safety studies and it has been accepted by regulators in some cases to replace the traditional conservative analysis. Finally, there is also a renewed focus in supplying reliable covariance data (nuclear data uncertainties) that can then be used in uncertainty methods. Uncertainty and sensitivity studies are therefore becoming an essential component of any significant effort in data and simulation improvement. In order to address uncertainty in analysis and methods in the HTGR community the IAEA launched a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modelling early in 2012. The project is built on the experience of the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity, but focuses specifically on the peculiarities of HTGR designs and its simulation requirements. Two benchmark problems were defined with the prismatic type design represented by the MHTGR-350 design from General Atomics (GA) while a 250 MW modular pebble bed design, similar to the INET (China) and indirect-cycle PBMR (South Africa) designs are also included. In the paper more detail on the benchmark cases, the different specific phases and tasks and the latest status and plans are presented.

Frederik Reitsma; Gerhard Strydom; Bismark Tyobeka; Kostadin Ivanov

2012-10-01T23:59:59.000Z

97

Number: 1394 Description: In what ...  

Science Conference Proceedings (OSTI)

... Number: 1752 Description: When was the Oklahoma City bombing? ... name of the plane that dropped the Atomic Bomb on Hiroshima? ...

2003-02-12T23:59:59.000Z

98

Number: 894 Description: How far is it ...  

Science Conference Proceedings (OSTI)

... Number: 1198 Description: When was Hiroshima bombed? ... 1264 Description: What is the atomic weight of ...

2002-04-29T23:59:59.000Z

99

Minimum Description Length Model Selection  

E-Print Network (OSTI)

Minimum Description Length Model Selection Problems and Extensions Steven de Rooij #12;#12;Minimum Description Length Model Selection Problems and Extensions #12;ILLC Dissertation Series DS-2008-07 For further-mail: illc@science.uva.nl homepage: http://www.illc.uva.nl/ #12;Minimum Description Length Model Selection

100

Description of Proposed Action  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carlsbad Field Office Carlsbad Field Office RECORD OF CATEGORICAL EXCLUSION DETERMINATION 1 Description of Proposed Action Performance of a three-dimensional seismic survey line on approximately 2,409 acres contained within the WIPP Land Withdrawal Area as part of a larger survey to determine whether hydrocarbons are present in the region in quantities that warrant extraction and development. Number and Title of Applicable Categorical Exclusion B3.1 Site Characterization/Environmental Monitoring Activities covered by this Categorical Exclusion include, but are not limited to, site characterization and environmental monitoring under CERCLA and RCRA. Specific activities include, but are not limited to: (a) Geological, geophysical (such as gravity, magnetic, electrical, seismic, and radar), geochemical, and

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

102

YUCCA MOUNTAIN SITE DESCRIPTION  

SciTech Connect

The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

A.M. Simmons

2004-04-16T23:59:59.000Z

103

Climate Suitability Tool Description  

Science Conference Proceedings (OSTI)

... The Climate Suitability Tool implements the method outlined in the following publications ... The analysis is based on a single-zone model of natural ...

104

Hamiltonian description of the ideal fluid  

SciTech Connect

Fluid mechanics is examined from a Hamiltonian perspective. The Hamiltonian point of view provides a unifying framework; by understanding the Hamiltonian perspective, one knows in advance (within bounds) what answers to expect and what kinds of procedures can be performed. The material is organized into five lectures, on the following topics: rudiments of few-degree-of-freedom Hamiltonian systems illustrated by passive advection in two-dimensional fluids; functional differentiation, two action principles of mechanics, and the action principle and canonical Hamiltonian description of the ideal fluid; noncanonical Hamiltonian dynamics with examples; tutorial on Lie groups and algebras, reduction-realization, and Clebsch variables; and stability and Hamiltonian systems.

Morrison, P.J.

1994-01-01T23:59:59.000Z

105

Technical Section: Procedural isotropic stochastic textures by example  

Science Conference Proceedings (OSTI)

Image textures can easily be created using texture synthesis by example. However, creating procedural textures is much more difficult. This is unfortunate, since procedural textures have significant advantages over image textures. In this paper we address ... Keywords: Isotropic stochastic texture, Noise, Procedural noise, Procedural texture, Solid texture, Stochastic modeling, Texture synthesis by example, Texture synthesis/analysis, Wavelet noise

Ares Lagae; Peter Vangorp; Toon Lenaerts; Philip Dutré

2010-08-01T23:59:59.000Z

106

University of Waste Procedures  

E-Print Network (OSTI)

University of Maryland Hazardous And Regulated Waste Procedures Manual Revised July 2001 #12;Review II. HAZARDOUS WASTE MANAGEMENT III. BIOLOGICAL, PATHOLOGICAL AND MEDICAL WASTE (BPMW) MANAGEMENT IV. LOW-LEVEL RADIOACTIVE WASTE (LLRW) MANAGEMENT V. EMERGENCY PROCEDURES VI. WASTE MINIMIZATION VII

Rubloff, Gary W.

107

Integrated Safety Management (ISM) - System Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

System Descriptions Integrated Safety Management (ISM) ism logo Sample DOE Contractor ISM System Descriptions Sample DOE Site Office ISM System Descriptions DOE HQ Program Office...

108

Original Workshop Proposal and Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop Proposal and Description Visualization Requirements for Computational Science and Engineering Applications Proposal for a DoE Workshop to Be Held at the...

109

Inferring hierarchical descriptions  

Science Conference Proceedings (OSTI)

We create a statistical model for inferring hierarchical term relationships about a topic, given only a small set of example web pages on the topic, without prior knowledge of any hierarchical information. The model can utilize either the full text of ... Keywords: cluster naming, feature selection, hierarchical relationships, statistical models, web analysis

Eric Glover; David M. Pennock; Steve Lawrence; Robert Krovetz

2002-11-01T23:59:59.000Z

110

DOE-RL Integrated Safety Management System Program Description  

SciTech Connect

The purpose of this Integrated Safety Management System (ISMS) Program Description (PD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This PD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this PD contains some information on contractor processes and procedures which then require RL approval or oversight.

SHOOP, D.S.

2000-06-29T23:59:59.000Z

111

The fuzzy description logic ALCFLH  

E-Print Network (OSTI)

We present the fuzzy description logic ALCF LH. ALCF LH is based on ALCF H, but linear hedges are used instead of exponential ones. This allows to solve the entailment and the subsumption problem in a fuzzy description logic, where arbitrary concepts and roles may be modified. 1

Steffen Hölldobler; Nguyen Hoang Nga; Technische Universität Dresden; Tran Dinh Khang

2005-01-01T23:59:59.000Z

112

NFRC Procedures for Laminates  

NLE Websites -- All DOE Office Websites (Extended Search)

Laminates Laminates Last update: 12/10/2013 07:29 PM NFRC now has a procedure for making laminates in Optics5 and importing those laminate constructions into WINDOW5 to be used in a whole product calculation. The information presented below is provided to help simulators with this process. Feel free to contact us at WINDOWHelp@lbl.gov with questions or comments. NFRC Laminate Procedure Laminate Procedures (approved by NFRC) (PDF file) Approved Interlayer List (IGDB 33.0) (PDF file) NFRC Laminate Procedure Training Powerpoint with Examples (This Powerpoint presentation was used in the NFRC web based training sessions in December 2006 and January 2007) PowerPoint Presentation (PPT file) PowerPoint Presentation (PDF file) Help and Troubleshooting Error Messages The table below contains common warnings and error messages that may appear in Optics5 when calculating a laminate. Some of the messages can be ignored, and some are significant, which is indicated in the table.

113

Current Test Procedure Waivers  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy's (DOE) regulations for covered products permit a person to seek a waiver, or an interim waiver, from the test procedure requirements for covered appliances and...

114

NSLS Services | Shipping Procedures  

NLE Websites -- All DOE Office Websites (Extended Search)

NSLS Shipping Procedures For shipments arriving at the NSLS from other locations, please ship via Federal Express. If this is not possible, or if you have any questions, please...

115

PROCEDURE FOR PREPARING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PROCEDURE FOR PREPARING PROCEDURE FOR PREPARING RECORDS INVENTORY AND DISPOSITION SCHEDULES (RIDS) Revision 1 November 1, 2007 Records Management Division, IM-23 PROCEDURE FOR PREPARING RECORDS INVENTORY AND DISPOSITION SCHEDULES (RIDS) 1. If the records have not yet been inventoried, see "Procedure for Conducting a Records Inventory." An inventory must be completed prior to preparing the RIDS. 2. The Records Inventory and Disposition Schedules (RIDS) should be reviewed and updated at least annually on DOE F 1324.10 and DOE F 1324.9. The RIDS covers all record, administrative and programmatic, as well as non- record material. The RIDS must include: a. Complete and detailed information identifying the organization (s) responsible for the records.

116

Operating Procedures Guideline  

Science Conference Proceedings (OSTI)

The intention of this report is to provide guidance for generating stations’ management and personnel striving for successful methods of developing effective operating procedures. Standard operating procedure management is used in most businesses and industries to assist in the safe and efficient operation of those companies. Effectively managing the program is essential in order to comply with mandatory regulations, maintain the highest possible level of plant integrity, minimize human ...

2012-12-12T23:59:59.000Z

117

Confined volume blasting experiments: Description and analysis  

SciTech Connect

A series of bench-scale blasting experiments was conducted to produce rubble beds for use in retorting experiments. The experiments consisted of blasting oil shale with explosives within a confined volume containing 25% void. A variety of blasting geometries was used to control the fragment size distribution and void distribution in the rubble. The series of well controlled tests provided excellent data for use in validating rock fragmentation models. Analyses of the experiments with PRONTO, a dynamic finite element computer code, and a newly developed fracturing model provided good agreement between code predictions and experimental measurements of fracture extent and fragment size. CAROM, a dynamic distinct element code developed to model rock motion during blasting, was used to model the fully fragmented tests. Calculations of the void distribution agreed well with experimentally measured values. 9 refs., 11 figs., 1 tab.

Gorham-Bergeron, E.; Kuszmaul, J.S.; Bickel, T.C.; Shirey, D.L.

1987-01-01T23:59:59.000Z

118

Hutchison Effect Metal Samples: Description and Analysis  

Science Conference Proceedings (OSTI)

... and other equipment which caused severe plastic deformation, delamination, de-alloying and unusual magnetic properties in metal (aluminum, copper, brass,

119

Summary description of the Fast Flux Test Facility  

SciTech Connect

This document has been compiled and issued to provide an illustrated engineering summary description of the FFTF. The document is limited to a description of the plant and its functions, and does not cover the extensive associated programs that have been carried out in the fields of design, design analysis, safety analysis, fuels development, equipment development and testing, quality assurance, equipment fabrication, plant construction, acceptance testing, operations planning and training, and the like.

Cabell, C.P. (comp.)

1980-12-01T23:59:59.000Z

120

Record Series Descriptions: Hanford Site  

NLE Websites -- All DOE Office Websites (Extended Search)

Files Policies and Procedures Correspondence Director's Office Correspondence with AEC, ERDA, & DOE Biology Department Records Biology Department Records, du Pont and General...

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Awardee Share Procedures  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Awardee Share Procedures Awardee Share Procedures Procedures for Correctly Reporting Awardee Share on the FAADS/FAADS Plus reporting screen in STRIPES To ensure proper reporting by DOE to USASpending.gov, you must enter the awardee share (also known as the cost share, recipient share, and non-federal share) manually on the FAADS/FAADS Plus reporting screen in STRIPES. The FAADS/FAADS Plus file is the financial assistance equivalent of the FPDS-NG data entry for acquisition awards. The awardee share amount is not system generated on the FAADS/FAADS Plus reporting screen like the obligation amount is. The fields on the FAADS/FAADS Plus form which must be entered when reporting a Cost-share Financial Assistance Award are: Field #17 Non-Federal Funding Sign Choose 'Obligation', which refers to a positive amount (sign), or 'Deobligation', which refers to a

122

Radiation Emergency Procedure Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

Managing Radiation Emergencies Managing Radiation Emergencies Procedure Demonstrations Procedure Demonstrations Note: RealPlayer is needed for listening to the narration that accompany these demonstrations. Real Player Dressing To Prevent the Spread of Radioactive Contamination This demonstration shows how your team can dress to prevent the spread of radioactive contamination. Click to begin presentation on dressing to prevent the spread of radioactive contamination. Preparing The Area This demonstration shows basic steps you can take to gather equipment and prepare a room to receive a patient who may be contaminated with radioactive material. Click to begin presentation on preparing a room to receive a radioactive contaminated patient. Removing Contaminated Clothing This demonstration shows the procedure for removing clothing from a patient who may be contaminated with radioactive material.

123

The Subsumption Problem of the Fuzzy Description Logic ALCF H  

E-Print Network (OSTI)

We present the fuzzy description logic ALCF H where primitive concepts are modified by means of hedges taken from hedge algebras. ALCF H is strictly more expressive than Fuzzy-ALC defined in [9]. We show that given a linearly ordered set of hedges primitive concepts can be modified to any desired degree by prefixing them with appropriate chains of hedges. Furthermore, we define a decision procedure for the unsatisfiability problem in ALCF H and for the subsumption problem in a fragment of ALCF H. Key words: fuzzy logic, hedge algebras, description

Steffen Hölldobler; Hans-peter Störr

2004-01-01T23:59:59.000Z

124

Precipitator Performance Estimation Procedure  

Science Conference Proceedings (OSTI)

Increased availability of data to use with an existing computer model makes it possible for utilities to calculate electrostatic precipitator performance without access to industry databases. This report examines the accuracy of the model and develops procedures to make it a more useful tool for troubleshooting precipitator performance and for selecting the size of a new unit.

1986-12-22T23:59:59.000Z

125

Practical Procedures for Auditing Industrial Boiler Plants  

E-Print Network (OSTI)

Industrial boiler plants are an area of opportunity in virtually every industry to save energy and reduce costs by using relatively simple, inexpensive auditing procedures. An energy audit consists of inspection, measurement, analysis, and the preparation of recommendations. A complete boiler plant program will consider each individual boiler, boiler room auxiliary equipment, steam distribution and return systems, and steam end use equipment. This paper summarizes the practical procedures, techniques, and instrumentation which Nabisco uses in its boiler plant energy conservation program.

O'Neil, J. P.

1980-01-01T23:59:59.000Z

126

Emergency Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services Employee Services Safety and Health Emergency Procedures Emergency Procedures Note: This page is pending deletion, please refer to the Safety and health main page...

127

A Temporal Description Logic Based Access Control Model for Expressing History Constrained Policies in Semantic Web  

Science Conference Proceedings (OSTI)

An access control model for Semantic Web should be compatible with the corresponding semantic model. The access control procedure(s) should also take the semantic relationships between the entities (specified as ontologies) into account. Considering ... Keywords: Access Control, Description Logic, Semantic Web, History of Accesses

Fathieh Faghih; Morteza Amini; Rasool Jalili

2009-07-01T23:59:59.000Z

128

Descriptive Model of a Generic WAMS | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS The Department of Energy's (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation's electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study. Descriptive Model of a Generic WAMS More Documents & Publications Securing Wide Area Measurement Systems 2012 Advanced Applications Research & Development Peer Review - Day 1

129

Description  

E-Print Network (OSTI)

A handbook for executives and non-executives in healthcare organisations February 2006DH INFORMATION READER BOX Policy HR / Workforce

unknown authors

2006-01-01T23:59:59.000Z

130

Description  

E-Print Network (OSTI)

When incorrect prices are determined in the market, the IMO can replace the incorrect prices with administered prices in accordance with the Market Rules within two business days. Suppliers and consumers that respond to high prices that are later determined to be incorrect and replaced by lower administered prices lose significant production and income and become hesitant to respond to price signals otherwise provided. To increase their confidence in the price signals, they market participants would like to be compensated for losses in the event that prices are corrected/administered and they would like to be notified of potential price corrections as close to real-time as possible. Non-market participants who independently respond to pricing signals in the market may also suffer from a loss of production and income as a result of incorrectly posted prices. However, the issues related to non-market participants will not be included in this particular discussion. Background The current Market Rules allow for the IMO to administer price when the market

unknown authors

2004-01-01T23:59:59.000Z

131

Description  

E-Print Network (OSTI)

When incorrect prices are determined in the market, the IMO can replace the incorrect prices with administered prices in accordance with the Market Rules within two business days. Suppliers and consumers that respond to high prices that are later determined to be incorrect and replaced by lower administered prices may lose significant production and income and subsequently become hesitant to respond to price signals otherwise provided. To increase their confidence in the price signals, they market participants would like to be compensated for losses in the event that prices are corrected/administered and they would like to be notified of potential price corrections as close to real-time as possible. Non-market participants who independently respond to pricing signals in the market may also suffer from a loss of production and income as a result of incorrectly posted prices. However, the issues related to non-market participants will not be included inunder this particular discussionissue. Background The current Market Rules allow for the IMO to administer price when the market pricing mechanisms are not functioning normally (Chapter 7, Section 8,4). More specifically, the IMO will administer prices under in the following three situations: • Failure to publish prices due to a forced or planned outage to the hardware, software or communications systems that support the dispatch algorithm • The published prices are incorrect due to incorrect inputs to the dispatch algorithm • Market suspension There have been a number of occasions when prices have been administered, such as during the market suspension resulting from the August 2003 blackout or, more typically, on occasions when market related systems fail or are on outage. Often price is administered automatically before incorrect prices can be published, but at times the incorrect prices cannot and are not detected before being published and must be changed after the fact.

unknown authors

2004-01-01T23:59:59.000Z

132

Policies and Procedures - Accessing Facilities  

Science Conference Proceedings (OSTI)

... of Facilities Use Agreements: Description of the facilities use agreements ... Criteria: Guidance for applicants describing essential information about ...

2013-09-24T23:59:59.000Z

133

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Description of Building Types Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

134

Notices Description: Entergy Services, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19 Federal Register 19 Federal Register / Vol. 76, No. 139 / Wednesday, July 20, 2011 / Notices Description: Entergy Services, Inc. Response to May 13, 2011 Deficiency Letter. Filed Date: 07/12/2011. Accession Number: 20110712-5164. Comment Date: 5 p.m. Eastern Time on Tuesday, August 02, 2011. Docket Numbers: ER11-2206-001. Applicants: Alta Wind V, LLC. Description: Alta Wind V, LLC, Notice of Non-Material Change in Status. Filed Date: 07/13/2011. Accession Number: 20110713-5091. Comment Date: 5 p.m. Eastern Time on Wednesday, August 03, 2011. Docket Numbers: ER11-3727-001. Applicants: El Segundo Energy Center LLC. Description: El Segundo Energy Center LLC submits tariff filing per 35.17(b): Supplement to Application for Market-Based Rate Authority to be effective 8/5/2011.

135

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT  

Science Conference Proceedings (OSTI)

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

J.F. Beesley

2005-04-21T23:59:59.000Z

136

TRANSPARENCY RECYCLING PROGRAM PROCEDURES  

NLE Websites -- All DOE Office Websites (Extended Search)

TRANSPARENCY RECYCLING Don't throw out your used overhead transparencies! RECYCLE them for REUSE. It's Easy! Follow these simple procedures: 1.) COLLECT used transparencies to be recycled. 2.) SEPARATE the transparencies from ringed binders, plastic or paper folders, envelopes, and/or files. 3.) PLACE the transparencies (only) into an intra-laboratory mail envelope. 4.) SEND the envelope to: Terri Schneider, Building 201, 1D-10. Terri will prepare a

137

DOE Reasonable Accommodation Procedures  

Energy.gov (U.S. Department of Energy (DOE))

Pursuant to Executive Order 13164, the Department of Energy (hereinafter referred to as the “department”), is charged with establishing written procedures for the facilitation of reasonable accommodation for: (1) individuals with disabilities in the application process for employment with the Department; (2) Department employees with disabilities to perform the essential functions of a position; and (3) Department employees with disabilities to enjoy benefits and privileges of employment equal to those enjoyed by employees without disabilities.

138

A Temporal Description Logic for Reasoning about Actions and Plans  

E-Print Network (OSTI)

A class of interval-based temporal languages for uniformly representing and reasoning about actions and plans is presented. Actions are represented by describing what is true while the action itself is occurring, and plans are constructed by temporally relating actions and world states. The temporal languages are members of the family of Description Logics, which are characterized by high expressivity combined with good computational properties. The subsumption problem for a class of temporal Description Logics is investigated and sound and complete decision procedures are given. The basic language TL-F is considered #rst: it is the composition of a temporal logic TL # able to express interval temporal networks # together with the non-temporal logic F # a Feature Description Logic. It is proven that subsumption in this language is an NP-complete problem. Then it is shown how to reason with the more expressive languages TLU-FU and TL-ALCF . The former adds disjunction both at...

Alessandro Artale; Enrico Franconi

1998-01-01T23:59:59.000Z

139

Coordinate-independent font description using Kanji as an example  

E-Print Network (OSTI)

, font-independent character descriptions are important for a systematic approach to automated and semi-automated font design. This is particularly so for large character sets such as Kanji. The paper defines a completely coordinate-independent notation for Kanji, which contains all the necessary information to produce legible character sketches. KEY WORDS Abstract character description Coordinate- independent font Large fonts Kanji Prolog 1 INTRODUCTION In his comment on Knuth's METAFONT [1], Hofstadter [2] envisions that a futuregeneration font design system should consist of a) an abstract description of characters in terms of roles such as `crossbar'; b) `an ability to generalize from a few letterforms ... to an entire typeface', and c) `an integration of perception with generation'. Intermixing of structure and parameter values leads to tools for the implementation of fonts and metafonts based on the concepts of procedural, functional, and structured programming [1,3,4]. How...

Martin J. Dürst

1993-01-01T23:59:59.000Z

140

CMS System Security Plan Procedure  

Science Conference Proceedings (OSTI)

... TASK 5: SYSTEM DECOMMISSION. ... BPSSM Business Partners Systems Security Manual. ... of Information Technology, Policy, Procedures, & Audits. ...

2009-06-30T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Science Accelerator Resource Descriptions, Office of Scientific...  

NLE Websites -- All DOE Office Websites (Extended Search)

Resource Descriptions Below you will find descriptions of each of the scientific and technical resources searchable in the Science Accelerator. DOE Data Explorer Locate collections...

142

Learning description of term patterns using glossary resources  

E-Print Network (OSTI)

In this paper, we describe a method of automatic extraction of knowledge patterns using in term descriptions from glossary, and using them to extract term description from technical texts. A brief introduction of the problem will be presented. After that, knowledge patterns and related works are discussed. By statistical analysis, we will show that these patterns can be learned, and we will propose a method to learn these pattern based on discover collocation of important verbs and nouns represent main concepts in the domain. Evaluation have been made showing that using the method, we can extract half of the correct descriptions, with a noise just one third. 1.

Le An Ha; Wolverhampton Wv Sb

2002-01-01T23:59:59.000Z

143

Microscopic Description of Induced Fission  

E-Print Network (OSTI)

Selected aspects of the description of neutron-induced fission in 240Pu in the framework of the nuclear energy density functional theory at finite temperature are presented. In particular, we discuss aspects pertaining to the choice of thermodynamic state variables, the evolution of fission barriers as function of the incident neutron energy, and the temperatures of the fission fragments.

N. Schunck

2013-02-22T23:59:59.000Z

144

Rough Ride Test Procedure  

NLE Websites -- All DOE Office Websites (Extended Search)

NTP005 NTP005 Revision 2 Effective December 1, 2004 Electric Vehicle Rough Road Course Test Prepared by Electric Transportation Applications Prepared by: _______________________________ Date:__________ Ryan Harkins Approved by: _________________________________________________ Date: _______________ Donald B. Karner ©2004 Electric Transportation Applications All Rights Reserved Procedure ETA-NTP005 Revision 2 2 TABLE OF CONTENTS 1.0 Objectives 3 2.0 Purpose 3 3.0 Documentation 3 4.0 Initial Conditions and Prerequisites 4 5.0 Testing Activity Requirements 6 6.0 Glossary 12 7.0 References 14 Appendices Appendix A - Electric Vehicle Rough Road Test Data Sheet 15

145

An input-output procedure for calculating economy-wide economic impacts in supply chains using homeland security consequence analysis tools.  

SciTech Connect

Sandia National Laboratories has developed several models to analyze potential consequences of homeland security incidents. Two of these models (the National Infrastructure Simulation and Analysis Center Agent-Based Laboratory for Economics, N-ABLE{trademark}, and Loki) simulate detailed facility- and product-level consequences of simulated disruptions to supply chains. Disruptions in supply chains are likely to reduce production of some commodities, which may reduce economic activity across many other types of supply chains throughout the national economy. The detailed nature of Sandia's models means that simulations are limited to specific supply chains in which detailed facility-level data has been collected, but policymakers are often concerned with the national-level economic impacts of supply-chain disruptions. A preliminary input-output methodology has been developed to estimate national-level economic impacts based upon the results of supply-chain-level simulations. This methodology overcomes two primary challenges. First, the methodology must be relatively simple to integrate successfully with existing models; it must be easily understood, easily applied to the supply-chain models without user intervention, and run quickly. The second challenge is more fundamental: the methodology must account for both upstream and downstream impacts that result from supply-chain disruptions. Input-output modeling typically estimates only upstream impacts, but shortages resulting from disruptions in many supply chains (for example, energy, communications, and chemicals) are likely to have large downstream impacts. In overcoming these challenges, the input-output methodology makes strong assumptions about technology and substitution. This paper concludes by applying the methodology to chemical supply chains.

Smith, Braeton J.; Vugrin, Eric D.; Loose, Verne W.; Warren, Drake E.; Vargas, Vanessa N.

2010-10-01T23:59:59.000Z

146

SANS Training Voucher Program Registration Procedures | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SANS Training Voucher Program Registration Procedures SANS Training Voucher Program Registration Procedures SANS Training Voucher Program Registration Procedures For Federal...

147

Text REtrieval Conference (TREC) System Description  

Science Conference Proceedings (OSTI)

Text REtrieval Conference (TREC) System Description. Organization Name: Los Alamos National Laboratory, Run ID: lanl981. ...

148

Quality Assurance Requirements and Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QjCivilianRadioactive QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160 Successful implementation of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance (QA) program is essential for the OCRWM to carry out its mission. Our mission is to manage and dispose ofbigh-Ievel radioactive waste and spent nuclear fuel in a manner that protects health, safety, and the environment; enhances national and energy security; and merits

149

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy Consumption Survey (CBECS) > Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 and 2003 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

150

Records Management Exit Procedures  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exit Procedures For Departing Federal and contractor Employees PRESERVATION OF FEDERAL RECORDS The Federal Records Act requires the Department of Energy (DOE) Records Officer to remind departing Federal and contractor employees that Federal records may not be removed from Government custody nor may they be destroyed except in accordance with a records disposition schedule that has been approved by the Archivist of the United States. The creation of adequate documentation and the preservation of Federal records are required by law and regulation (contained in 36 CFR Chapter XII). As Federal and contractor employees, you have Federal record-keeping responsibilities that are regulated by the National Archives and Records Administration (NARA) to ensure the retention and

151

Brief description of image based 3D face recognition methods  

Science Conference Proceedings (OSTI)

The goal of this paper is to presents Brief Description of literature on Image Based human and machine recognition of faces during 1987 to 2010. Machine recognition of faces has several applications. As one of the most successful applications of image ... Keywords: 3D Face Recognition, 3D Morphable Model, Categorization, Face Detection, Face Recognition from Image Sequences, Independent Component Analysis, Linear Discriminate Analysis, Principal Component Analysis, Video based face recognition, research Issues

Sushma Jaiswal; Sarita Singh Bhadauria; Rakesh Singh Jadon; Tarun Kumar Divakar

2010-12-01T23:59:59.000Z

152

Search Hanford accessible reports electronically system design description. Revision 1  

SciTech Connect

The Search Hanford Accessible Records Electronically (SHARE) system was produced by a combined team of personnel from Westinghouse Hanford Company (WHC) Corrective Action Data Systems (CADS) and Information Resource Management (IRM) Information and Scientific Systems (ISS) organizations. The ESQD Text Evaluation and exchange Tool (ETEXT) prototype was used as a basis for the requirements used to support this design/build effort. TOPIC was used to build the SHARE application. TOPIC is a text search and retrieval software product produced by the Verity Corporation. The TOPIC source code is not provided with the product, and the programs cannot be changed. TOPIC can be customized for special requirements. The software is fully documented. Help messages, menu and screen layouts, command edits and options, and internal system design are all described in the TOPIC documentation. This System Design Description (SDD) will not reiterate the TOPIC documentation and design. Instead, it will focus on the SHARE installation of TOPIC. This SDD is designed to assist the SHARE database/infobase administrator (DBA) in maintaining and supporting the application. It assumes that the assigned DBA is knowledgeable in using the TOPIC product, and is also knowledgeable in using a personal computer (PC), Disk Operating System (DOS) commands, and the document WHC-CM-3-10. SHARE is an Impact Level 4 system, and all activities related to SHARE must conform with the WHC-CM-3-10 procedures for an Impact Level 4 system. The Alternatives Analysis will be treated as a level 3-Q document, to allow for reference by potential future projects.

Gilomen, T.L.

1995-12-31T23:59:59.000Z

153

DOE/EA-1673: Environmental Assessment for Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and Test Procedures for Commercial Heating, Air-Conditioning, and Water-Heating Equipment (July 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 Environmental Assessment for 10 CFR 431 Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and Test Procedures for Commercial Heating, Air- Conditioning, and Water-Heating Equipment July 2009 8-i CHAPTER 8. ENVIRONMENTAL ASSESSMENT TABLE OF CONTENTS 8.1 INTRODUCTION ............................................................................................................... 8-1 8.2 AIR QUALITY ANALYSIS ............................................................................................... 8-1 8.3 AIR POLLUTANT DESCRIPTIONS ................................................................................ 8-1 8.4 AIR QUALITY REGULATIONS ...................................................................................... 8-3

154

Content of System Design Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-3024-2011 August 2011 ________________________ Superseding DOE-STD-3024-98 DOE STANDARD CONTENT OF SYSTEM DESIGN DESCRIPTIONS U.S. Department of Energy AREA EDCO Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-3024-2011 ii Available on the Department of Energy Technical Standards web page at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-3024-2011 iii CONTENTS PAGE Foreword ..................................................................................................................................................... iv 1. PURPOSE ............................................................................................................................................1

155

Procedure for matching synfuel users with potential suppliers. Final report  

DOE Green Energy (OSTI)

A procedure has been developed for matching prospective users and producers of synthetic fuels. The matching procedure, which involves a hierarchical screening process, is designed to assist OFC in: locating a supplier for a firm that wishes to obtain synthetic fuel exemption (Fuel Use Act); determining whether the fuel supplier proposed by a petitioner is technically and economically capable of meeting the petitioner's needs; and assisting the Synthetic Fuels Corporation in evaluating potential markets for synthetic fuels. Application of the screening procedure resulted in the identification of one or more candidates for supplying synthetic fuel to each of the prospective users. In this report the development of the screening procedure is described. Chapter 1 contains a detailed description of the seven screens; Chapter 2 describes the development of the hierarchical procedure for applying the screens to each synthetic fuels project; Chapter 3 describes the modification of the screening procedure for low and medium Btu gas; Chapter 4 describes the application of the procedure. Appendix A is a list of references used in developing the procedure; Appendix B is a detailed listing of proposed and ongoing synthetic fuel projects.

None

1981-09-26T23:59:59.000Z

156

Index of /research/alcator/facility/Procedures/DIAGNOSTICS  

NLE Websites -- All DOE Office Websites (Extended Search)

DIAGNOSTICS DIAGNOSTICS [ICO] Name Last modified Size Description [DIR] Parent Directory - [ ] DNB Emergency Off Procedures42208.pdf 22-Apr-2008 15:58 73K [ ] DNB Emergency Off Procedures reva.pdf 04-Dec-2008 07:02 74K [ ] DNB Interim Safety Procedures050608.pdf 06-May-2008 14:11 1.2M [ ] FIR Laser Pumpout Procedure Rev 1.00.pdf 23-Apr-2008 16:05 22K [ ] FIR Laser Startup Procedure Rev 1.00.pdf 23-Apr-2008 16:05 29K [ ] FIR Laser Venting Procedure Rev 1.00.pdf 23-Apr-2008 16:05 22K [ ] Safety procedure for deuterium DNB operation.pdf 09-Jul-2003 13:01 8.2K [TXT] Safety procedure for deuterium DNB operation.txt 09-Jul-2003 13:01 4.5K [ ] TCI Window Cleaning.pdf 07-May-2003 14:32 62K [TXT] TCI Window Cleaning.txt 06-May-2003 14:38 3.2K

157

Integrated analysis procedure of aerospace composite structure  

E-Print Network (OSTI)

The emergence of composite material application in major commercial aircraft design, represented by the Boeing 787 and Airbus A350-XWB, signals a new era in the aerospace industry. The high stiffness to weight ratio of ...

Ahn, Junghyun

2008-01-01T23:59:59.000Z

158

Presidential Permits - Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Permits - Procedures Presidential Permits - Procedures Electricity Advisory Committee Technology Development Electricity Policy Coordination and Implementation Transmission...

159

Procedure No. Title/Description Administrative EP-DIR-AP-10003...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Newly Identified Solid Waste Management Units (SWMUs) and Areas of Concern (AOCs) and Newly Discovered Releases EP-WES-SOP-4006 Review of Projects for Impacts to...

160

Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION The Office of Electricity Delivery and Energy Reliability (OE) leads national efforts to modernize the electric grid, enhance security and reliability of energy infrastructure, and facilitate recovery from disruptions to the energy supply. As stated in the President's A Policy Framework for the 21 st Century Grid, a smarter, modernized electric grid is fundamental to transforming the Nation's energy system and securing US leadership in a clean energy future. OE supports activities that enable innovation across the energy sector, empower American consumers, and secure our energy future. OE consists of three programs: Research and Development; Permitting, Siting and Analysis; and Infrastructure Security and Energy Restoration.

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Number: 1 Description: How did the ...  

Science Conference Proceedings (OSTI)

... Number: 80 Description: What part did ITT (International Telephone and Telegraph) and Anaconda Copper play in the ...

2003-03-03T23:59:59.000Z

162

Number: 1 Description: What powers did ...  

Science Conference Proceedings (OSTI)

... top> Number: 10 Description: What is one of the major problems with electronic producing turbines (windmills) in California? ...

2002-11-04T23:59:59.000Z

163

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Description Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference Industry Meetings Draft- Solicitation Synopsis...

164

System design description for the SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)  

DOE Green Energy (OSTI)

There is no new activity or procedure associated with the updating of this reference document. The updating of this system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. Any changes made to controlled components in the field will be updated after the time of implementation to support the engineers and operators understand, maintain, train to and operate the system. There are no new credible failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status. The incorporation of the two documents, Computer Systems Design Description (HNF-SD-WMCSDD-008) and the Input/Output Channel List (HNF-SD-WM-EL-001), as appendices allow for fewer errors in changes. Because the documents are all together, they will be approved as one document, not three separate entities which could be updated at different times, creating a situation which does not accurately depict field conditions.

Ermi, A.M.

1998-03-02T23:59:59.000Z

165

Laser Controlled Area Standard Operating Procedure (SOP)  

NLE Websites -- All DOE Office Websites (Extended Search)

6 4 6 4 Effective: Page 1 of 18 09/16/2011 Subject: Laser Safety Program Documentation: U2A The only official copy of this file is the one on-line in the PS ESH website. Before using a printed copy, verify that it is the most current version by checking the document issue date on the PS ESH website. BROOKHAVEN NATIONAL LABORATORY LASER CONTROLLED AREA STANDARD OPERATING PROCEDURE (SOP) U2A Laser Systems This document defines the safety management program for the laser system(s) listed below. All American National Standard Institute (ANSI) Hazard Class 3B and 4 laser systems must be documented, reviewed, and approved through use of this form. Each system must be reviewed annually. System description: There are 4 lasers installed at beamline U2A for diamond anvil cell experiments:

166

Laser Controlled Area Standard Operating Procedure (SOP)  

NLE Websites -- All DOE Office Websites (Extended Search)

90 90 1 Effective: Page 1 of 11 06/20/12 Subject: Laser Safety Program Documentation - Raman X18/19 Frenkel Group 3.1/2g03e011.doc 1 (02/2010) BROOKHAVEN NATIONAL LABORATORY LASER CONTROLLED AREA STANDARD OPERATING PROCEDURE (SOP) This document defines the safety management program for the laser system(s) listed below. All American National Standard Institute (ANSI) Hazard Class 3B and 4 laser systems must be documented, reviewed, and approved through use of this form. Each system must be reviewed annually. Modify the template for this document to fit your particular circumstance. System description: Raman fiber optic system with class 3B laser source Location: Currently in NSLS room 1-127, but will be utilized with beamlines X18A, X18B, and X19A

167

Laser Controlled Area Standard Operating Procedure (SOP)  

NLE Websites -- All DOE Office Websites (Extended Search)

PS-ESH-0025 PS-ESH-0025 01 Effective: Page 1 of 13 03/09/2012 Subject: Laser Safety Program Documentation X17C The only official copy of this file is the one on-line in the NSLS ESH website. Before using a printed copy, verify that it is the most current version by checking the document issue date on the NSLS ESH website. BROOKHAVEN NATIONAL LABORATORY LASER CONTROLLED AREA STANDARD OPERATING PROCEDURE (SOP) X17C Laser System System description: There is one laser at X17C: Diode-Pumped Solid State Laser (Class 3B) that has two uses: - Measurement of diamond anvil pressure from ruby fluorescence - Raman spectrum measurements Location: The DPSS laser system is located in NSLS room 1-134C LINE MANAGEMENT RESPONSIBILITIES The Owner/Operator for this laser is listed below. The Owner/Operator is the Line Manager of the system

168

Laser Controlled Area Standard Operating Procedure (SOP)  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 001 Effective: Page 1 of 11/18/11 11 Subject: Laser Safety Program Documentation Bldg 703 E3/E4 3.1/2g03e011.doc 1 (02/2010) BROOKHAVEN NATIONAL LABORATORY LASER CONTROLLED AREA STANDARD OPERATING PROCEDURE (SOP) This document defines the safety management program for the laser system(s) listed below. All American National Standard Institute (ANSI) Hazard Class 3B and 4 laser systems must be documented, reviewed, and approved through use of this form. Each system must be reviewed annually. Modify the template for this document to fit your particular circumstance. System description: MOS laser curvature measurement system - Thin Film Deposition Lab Location: 703, E2/E4 LINE MANAGEMENT RESPONSIBILITIES The Owner/Operator(s) for this laser is/are listed below. The Owner/Operator is the Line Manager of the

169

Laser Controlled Area Standard Operating Procedure (SOP)  

NLE Websites -- All DOE Office Websites (Extended Search)

79 79 01 Effective: Page 1 of 17 05/13/11 Subject: X17B3 Laser Safety Program Documentation 1 AUTHORIZATION | Princeton University BROOKHAVEN NATIONAL LABORATORY LASER CONTROLLED AREA STANDARD OPERATING PROCEDURE (SOP) This document defines the safety management program for the laser system listed below. All American National Standard Institute (ANSI) Hazard Class 3B and 4 laser systems must be documented, reviewed, and approved through use of this form. Each system must be reviewed annually. System description: A laser heating system for diamond anvil cell experiments has been installed at X17B3. A class 4 ytterbium fiber laser (IPG model YLR-100-SM-CS) is used to perform high-pressure laser heating of samples contained in diamond anvil cells. Included within this laser is a guide laser

170

Laser Controlled Area Standard Operating Procedure (SOP)  

NLE Websites -- All DOE Office Websites (Extended Search)

32 32 004 Effective: Page 1 of 13 12/1/10 Subject: Laser Safety Program Documentation X20C 3.1/2g03e011.doc 1 (02/2010) BROOKHAVEN NATIONAL LABORATORY LASER CONTROLLED AREA STANDARD OPERATING PROCEDURE (SOP) This document defines the safety management program for the laser system(s) listed below. All American National Standard Institute (ANSI) Hazard Class 3B and 4 laser systems must be documented, reviewed, and approved through use of this form. Each system must be reviewed annually. Modify the template for this document to fit your particular circumstance. System description: Time-resolved light scattering Location: X20C Hutch LINE MANAGEMENT RESPONSIBILITIES The Owner/Operator(s) for this laser is/are listed below. The Owner/Operator is the Line Manager of the

171

A range description for the planar circular Radon transform  

E-Print Network (OSTI)

The transform considered in the paper integrates a function supported in the unit disk on the plane over all circles centered at the boundary of this disk. Such circular Radon transform arises in several contemporary imaging techniques, as well as in other applications. As it is common for transforms of Radon type, its range has infinite co-dimension in standard function spaces. Range descriptions for such transforms are known to be very important for computed tomography, for instance when dealing with incomplete data, error correction, and other issues. A complete range description for the circular Radon transform is obtained. Range conditions include the recently found set of moment type conditions, which happens to be incomplete, as well as the rest of conditions that have less standard form. In order to explain the procedure better, a similar (non-standard) treatment of the range conditions is described first for the usual Radon transform on the plane.

Gaik Ambartsoumian; Peter Kuchment

2005-08-04T23:59:59.000Z

172

Expressive fuzzy description logics over lattices  

Science Conference Proceedings (OSTI)

It is generally accepted that the management of imprecision and vagueness will yield more intelligent and realistic knowledge-based applications. In this paper we present a fuzzy description logics framework based on certainty lattices. Our main feature ... Keywords: Certainty lattices, Description logics, Fuzzy description logics, Inverse roles, Role hierarchies, Transitive roles

Yuncheng Jiang; Yong Tang; Ju Wang; Peimin Deng; Suqin Tang

2010-03-01T23:59:59.000Z

173

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Title, Location Title, Location Estimated Cost Description Determination Date: 2010 LCLS Undulator 2 is envisioned to be a 0.2 - 2keV FEL x-ray source, capable of delivering x-rays to End Station A (ESA), located in the existing Research Yard at SLAC. It will also be configurable as a non- FEL hard x-ray source capable of delivering a chirped x-ray pulse for single-shot broad-spectrum measurements. The project would entail reconstruction of the electron beam transport to End Station A, construction and installation of a new undulator in the tunnel upstream of ESA and beam dump, and construction and installation of x-ray transport, optics, and diagnostics in ESA. It also includes the construction of an annex to End Station A , providing hutches for experiment stations.

174

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and posted 2/10/2011 and posted 2/10/2011 *Title, Location Estimated Cost Description Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain $50,000 FONSI: uncertain Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $70,000 Attachment: Memo, Moody to Marcinowski, III, SUBJECT: NEPA 2011 APS for DOE-SRS, Dated: Annual NEPA Planning Summary Environmental Assessments (EAs) Expected to be Initiated in the Next 12 Months Department of Energy (DOE) Savannah River Site (SRS) Jan-11 Estimated Schedule (**NEPA Milestones) South Carolina Department of Health and Environmental Control (SCDHEC) issued a National Pollutant Discharge Elimination System (NPDES) Industrial Stormwater General Permit (IGP) # SCR000000 November 12, with an effective date of January

175

Lithium atom interferometer using laser diffraction : description and experiments  

E-Print Network (OSTI)

We have built and operated an atom interferometer of the Mach-Zehnder type. The atomic wave is a supersonic beam of lithium seeded in argon and the mirrors and beam-splitters for the atomic wave are based on elastic Bragg diffraction on laser standing waves at 671 nm. We give here a detailed description of our experimental setup and of the procedures used to align its components. We then present experimental signals, exhibiting atomic interference effects with a very high visibility, up to 84.5 %. We describe a series of experiments testing the sensitivity of the fringe visibility to the main alignment defects and to the magnetic field gradient.

Alain Miffre; Marion Jacquey; Matthias Büchner; Gérard Trenec; Jacques Vigue

2004-10-22T23:59:59.000Z

176

Towards a K-theory description of quantum hair  

Science Conference Proceedings (OSTI)

The first steps towards a proposal for a description of the quantum hair in 4D supersymmetric black holes in string Calabi-Yau (CY) compactifications are given. The quantum hair consisting of electric and magnetic fractional charges in black holes are derived from periods of the CY's torsion cycles. In the process a K-theory interpretation of the quantum hair in terms of the Atiyah-Hirzebruch spectral sequence is carried out. Finally, the same procedure is considered for torsion cycles of certain generalized CY's threefolds such as half-flat manifolds.

Garcia-Compean, H.; Loaiza-Brito, O. [Departamento de Fisica, Centro de Investigacion y de Estudios Avanzados del I.P.N., P.O. Box 14-740, 07000, Mexico D.F (Mexico); Departamento de Fisica, Universidad de Guanajuato, C.P. 37150, Leon, Guanajuato (Mexico)

2012-08-24T23:59:59.000Z

177

Using Procedural RenderMan Shaders for Global Illumination  

E-Print Network (OSTI)

Global illumination techniques like radiosity or Monte-Carlo ray-tracing are becoming standard features of rendering systems. However, there is currently no accepted interface format which supports an appropriate physically-based scene description. In this paper we present extensions to the well-known RenderMan interface, which allow for a physically based scene description and support advanced global illumination techniques. Special emphasis has been laid on the support for procedural descriptions of reflection and emission by RenderMan surface shaders. So far, they could not be used with most global illumination algorithms. The extensions have been implemented in a physically-based rendering system and are illustrated with examples. 1. Introduction In recent years physically-based rendering and global illumination have became major topics in computer graphics. While these techniques are on the edge of being used in commercial applications, it is getting more and more important to fi...

Philipp Slusallek; Thomas Pflaum; Hans-peter Seidel

1995-01-01T23:59:59.000Z

178

Attribution and Apportionment - Preliminary Estimation Procedures  

NLE Websites -- All DOE Office Websites (Extended Search)

Preliminary Estimation Procedures Preliminary Estimation Procedures FHWA completes several steps in the motor fuel analysis process prior to beginning the annual State-by-State analysis. These steps include an estimation of non-highway fuel uses, public fuel uses, and gasohol consumption. The estimation models are briefly described below. The models require data from several outside sources. One major dataset is the Census Bureau's Vehicle Inventory and Use Survey (VIUS). This data set contains information on annual vehicle miles of travel, percent of off-road use, major use of the truck (agriculture, retail, etc.), engine type, and the State in which the truck is registered. VIUS does not, however, provide a fuel use breakdown between gasoline and gasohol, on-road versus off-road fuel economy, or a distribution of off-road travel by State. The VIUS is conducted every five years; the latest survey was in 1997.

179

Department of Energy Technical Standards Procedures | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Technical Standards Procedures Department of Energy Technical Standards Procedures DOE Technical Standards Program The following procedures should be used to...

180

Procedure for Planning and Conducting  

NLE Websites -- All DOE Office Websites (Extended Search)

Lift Plan Procedure Lift Plan Procedure Stanford Synchrotron Radiation Laboratory Lead Author __________________________________ Date 07/13/2005___________ David A. Ernst Mechanical Service Group Approvals: __________________ Date _____________________ Matt Padilla SSRL Safety Officer __________________ Date _____________________ Robert Hettel Accelerator System Department Head __________________ Date _____________________ Piero Pianetta Beam Line System Department Head Hoist and Rigging Panel Member _______________________________________ Date ______________________

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Development of an Automated Classification Procedure for Rainfall Systems  

Science Conference Proceedings (OSTI)

An automated procedure for classifying rainfall systems (meso-? scale and larger) was developed using an operational analysis of hourly precipitation estimates from radar and rain gauge data. The development process followed two main phases: a ...

Michael E. Baldwin; John S. Kain; S. Lakshmivarahan

2005-04-01T23:59:59.000Z

182

DOE Hydrogen Analysis Repository: Infrastructure Analysis of...  

NLE Websites -- All DOE Office Websites (Extended Search)

(HyDS-ME) Project ID: 258 Principal Investigator: Brian Bush Brief Description: This analysis uses the Scenario Evaluation and Regionalization Analysis (SERA) Model to...

183

Records Management Exit Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

leave. Records Management Exit Procedures More Documents & Publications Records Management Exit Procedures Operational Plan and Desktop Reference for the Veterans...

184

External > Programs > Environmental Management > Policies & Procedures  

NLE Websites -- All DOE Office Websites (Extended Search)

Policies & Procedures This website offers Environmental Management (EM) operating policies, procedures, standards, workaids, organizational charts, and other pertinent documents...

185

The Fallout between Procedure and Practice  

E-Print Network (OSTI)

OF CALIFORNIA SANTA CRUZ The Fallout between procedure andAurora Olmos-Gallo The Fallout Between Procedure and

Olmos-Gallo, Aurora Maria

2013-01-01T23:59:59.000Z

186

Property:File/Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name File/Description Property Type Text Description Description of the file's contents/purpose. Pages using the property "File/Description" Showing 25 pages using this property. (previous 25) (next 25) A Australia-Solar-Map.png + Average Daily Solar Exposure: Australia B BOEMRE OCS.oil.gas.2007-12.map.pdf + Outer Continental Shelf (OCS) Oil & Gas Leasing Program 2007 - 2012 BOEMRE US.CSB.Map.pdf + US Continental Shelf Boundary (CSB) Areas BOEMRE US.CSB.bathy.map.pdf + Outer Continental Shelf (OCS) Boundary Areas, in color BOEMRE atlantic.OCS.multiple.use.map.2003.pdf + Multiple Uses of the Atlantic Outer Continental Shelf BOEMRE lease.platforms.santa.barb.map.5.2010.pdf + Federal Leases in Pacific Ocean, near Santa Maria Basin

187

A novel hybrid (wind-photovoltaic) system sizing procedure  

SciTech Connect

Wind-photovoltaic hybrid system (WPHS) utilization is becoming popular due to increasing energy costs and decreasing prices of turbines and photovoltaic (PV) panels. However, prior to construction of a renewable generation station, it is necessary to determine the optimum number of PV panels and wind turbines for minimal cost during continuity of generated energy to meet the desired consumption. In fact, the traditional sizing procedures find optimum number of the PV modules and wind turbines subject to minimum cost. However, the optimum battery capacity is either not taken into account, or it is found by a full search between all probable solution spaces which requires extensive computation. In this study, a novel description of the production/consumption phenomenon is proposed, and a new sizing procedure is developed. Using this procedure, optimum battery capacity, together with optimum number of PV modules and wind turbines subject to minimum cost can be obtained with good accuracy. (author)

Hocaoglu, Fatih O. [Afyon Kocatepe University, Dept. of Electronics and Communication Eng., 03200 Afyonkarahisar (Turkey); Gerek, Oemer N.; Kurban, Mehmet [Anadolu University, Dept. of Electrical and Electronics Eng., 26555 Eskisehir (Turkey)

2009-11-15T23:59:59.000Z

188

The Fuzzy Description Logic ALCFH with Hedge Algebras as Concept Modifiers  

E-Print Network (OSTI)

we present the fuzzy description logic ALCF H introduced, where primitive concepts are modified by means of hedges taken from hedge al- gebras. ALCF H is strictly more expressive than Fuzzy-ALC defined procedure for the unsatisfiability problem in ALCF H , and discuss knowledge base expansion when using

Hoelldobler, Steffen

189

Business Case Slide 12: High-Volume: Casks - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Casks - Description Previous Slide Next Slide Table of Contents High-Volume: Casks - Description Description Use DUO2 to enhance the shielding efficiency in spent fuel casks for...

190

Property:WellFieldDescription | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Property Name WellFieldDescription Property Type String Description A description of the well field in the geothermal area This is a property...

191

Microsoft Word - 564M_Biomass_Project Descriptions FINAL 120409...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 More...

192

POSTER DESCRIPTION: Poster Title: "Distributed Electric Power...  

NLE Websites -- All DOE Office Websites (Extended Search)

DESCRIPTION: Poster Title: "Distributed Electric Power from Bio-based and Fossil Fuels" Entity: Technology Management, Inc. 9718 Lake Shore Blvd., Cleveland, Ohio 44108 Author(s):...

193

Machinist Pipeline/Apprentice Program Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

194

Property:Wavemaking Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Wavemaking Description Property Type Text Pages using the property "Wavemaking Description" Showing 25 pages using this property. (previous 25) (next 25) A Alden Large Flume + Wave generators not yet designed Alden Small Flume + Period adjustable electronically, height adjustable mechanically Alden Wave Basin + Period adjustable electronically, height adjustable mechanically C Carderock Maneuvering & Seakeeping Basin + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions. Carderock Tow Tank 2 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions Carderock Tow Tank 3 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions.

195

A Temporal Description Logic for Reasoning about Actions and Plans  

E-Print Network (OSTI)

A class of interval-based temporal languages for uniformly representing and reasoning about actions and plans is presented. Actions are represented by describing what is true while the action itself is occurring, and plans are constructed by temporally relating actions and world states. The temporal languages are members of the family of Description Logics, which are characterized by high expressivity combined with good computational properties. The subsumption problem for a class of temporal Description Logics is investigated and sound and complete decision procedures are given. The basic language TL-F is considered first: it is the composition of a temporal logic TL -- able to express interval temporal networks -- together with the non-temporal logic F -- a Feature Description Logic. It is proven that subsumption in this language is an NP-complete problem. Then it is shown how to reason with the more expressive languages TLU-FU and TL-ALCF. The former adds disjunction both at the temporal and non-temporal s...

Artale, A; 10.1613/jair.516

2011-01-01T23:59:59.000Z

196

NFRC Procedures for Applied Films  

NLE Websites -- All DOE Office Websites (Extended Search)

Applied Films Applied Films Last update: 12/10/2013 07:29 PM NFRC now has a procedure for adding applied films to substrates in Optics5 and importing those applied film constructions into WINDOW5 to be used in a whole product calculation. The information presented below is provided to help simulators with this process. Feel free to contact us at WINDOWHelp@lbl.gov with questions or comments. NFRC Applied Film Procedure Applied Film Procedures (approved by NFRC) (PDF file) Approved Applied Film List (IGDB 33.0) (PDF file) NFRC Laminate Procedure Training Powerpoint with Examples (This Powerpoint presentation was used in the NFRC web based training sessions in December 2006 and January 2007) PowerPoint Presentation (PPT file) PowerPoint Presentation (PDF file) Help and Troubleshooting

197

The Design Procedure Language Manual  

E-Print Network (OSTI)

This manual describes the Design Procedure Language (DPL) for LSI design. DPL creates and maintains a representation of a design in a hierarchically organized, object-oriented LISP data-base. Designing in DPL involves ...

Batali, John

1980-09-01T23:59:59.000Z

198

IES Calibration and Mapping Procedures  

Science Conference Proceedings (OSTI)

The procedures used in the Synoptic Ocean Prediction experiment for calibration of inverted echo sounder (IES) travel time ? data have led to substantially improved accuracy. In previous work, ? was converted to main thermocline depth ZT using ...

Karen L. Tracey; Stephan D. Howden; D. Randolph Watts

1997-12-01T23:59:59.000Z

199

Integrated Safety Management System (ISMS) program description  

Science Conference Proceedings (OSTI)

This document the ISMS Program for the 300 Area and lists the procedures necessary to implement the program.

BUMP, S.L.

1999-09-30T23:59:59.000Z

200

Towards a Library of Standard Operating Procedures (SOPs) for (meta)genomic annotation  

SciTech Connect

Genome annotations describe the features of genomes and accompany sequences in genome databases. The methodologies used to generate genome annotation are diverse and typically vary amongst groups. Descriptions of the annotation procedure are helpful in interpreting genome annotation data. Standard Operating Procedures (SOPs) for genome annotation describe the processes that generate genome annotations. Some groups are currently documenting procedures but standards are lacking for structure and content of annotation SOPs. In addition, there is no central repository to store and disseminate procedures and protocols for genome annotation. We highlight the importance of SOPs for genome annotation and endorse a central online repository of SOPs.

Kyrpides, Nikos; Angiuoli, Samuel V.; Cochrane, Guy; Field, Dawn; Garrity, George; Gussman, Aaron; Kodira, Chinnappa D.; Klimke, William; Kyrpides, Nikos; Madupu, Ramana; Markowitz, Victor; Tatusova, Tatiana; Thomson, Nick; White, Owen

2008-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

EXPERIMENTAL GAS COOLED REACTOR. FINAL HAZARDS SUMMARY REPORT. VOLUME I. DESCRIPTION AND HAZARDS EVALUATION (Book 1 and Book 2)  

SciTech Connect

A detailed piant description including layout drawings is presented. The results obtained in analysis of credible accidents and the associated hazards are also given. (J.R.D.)

1962-10-10T23:59:59.000Z

202

Emplacement Drift System Description Document  

SciTech Connect

The Emplacement Drift System is part of the Engineered Barrier System and provides the interface between the various waste package (WP) systems and the Ground Control System. In conjunction with the various WPs, the Emplacement Drift System limits the release and transport of radionuclides from the WP to the Natural Barrier following waste emplacement. Collectively, the Emplacement Drift System consists of the structural support hardware (emplacement drift invert and WP emplacement pallet) and any performance-enhancing barriers (drip shields and invert ballast) installed or placed in the emplacement drifts. The Emplacement Drift System is entirely located within the emplacement drifts in the subsurface portion of the Monitored Geologic Repository (MGR); specifically, it is physically bounded by the Subsurface Facility System, the Ground Support System, and the Natural Barrier. The Emplacement Drift System supports the key MGR functions of limiting radionuclide release to the Natural Barrier, minimizing the likelihood of a criticality external to the WPs, limiting natural and induced environmental effects, and providing WP support. The Emplacement Drift System limits radionuclide release to the Natural Barrier by controlling the movement of radionuclides within the emplacement drift and to the Natural Barrier, and by limiting water contact with the WPs. The Emplacement Drift System provides physical support and barriers for emplaced WPs that reduce water contact. The Emplacement Drift WP spacing supports the thermal loading performance by complimenting drift layout and orientation as described in the system description document for the Subsurface Facility System. The Emplacement Drift System supports the WP and also provides an environment that aids in enhancing WP confinement performance. As part of the Engineered Barrier System, the Emplacement Drift System interfaces with the WP systems. The Emplacement Drift System also interfaces with the Natural Barrier, Subsurface Facility System, and Ground Control System for the space and location of emplaced WPs, for the controlled release of radionuclides, and for controlling the heat, chemical, and physical effects that interact between these systems. The Emplacement Drift System interfaces with the Subsurface Ventilation System for preclosure heat removal from WPs. The Emplacement Drift System interfaces with the Waste Emplacement/Retrieval System and the Performance Confirmation Emplacement Drift Monitoring System for equipment clearance for the emplacement, retrieval, and monitoring of waste.

Eric Loros

2001-07-31T23:59:59.000Z

203

NDMAS System and Process Description  

SciTech Connect

Experimental data generated by the Very High Temperature Reactor Program need to be more available to users in the form of data tables on Web pages that can be downloaded to Excel or in delimited text formats that can be used directly for input to analysis and simulation codes, statistical packages, and graphics software. One solution that can provide current and future researchers with direct access to the data they need, while complying with records management requirements, is the Nuclear Data Management and Analysis System (NDMAS). This report describes the NDMAS system and its components, defines roles and responsibilities, describes the functions the system performs, describes the internal processes the NDMAS team uses to carry out the mission, and describes the hardware and software used to meet Very High Temperature Reactor Program needs.

Larry Hull

2012-10-01T23:59:59.000Z

204

Building Technologies Office: Current Test Procedure Waivers  

NLE Websites -- All DOE Office Websites (Extended Search)

Test Procedure Test Procedure Waivers to someone by E-mail Share Building Technologies Office: Current Test Procedure Waivers on Facebook Tweet about Building Technologies Office: Current Test Procedure Waivers on Twitter Bookmark Building Technologies Office: Current Test Procedure Waivers on Google Bookmark Building Technologies Office: Current Test Procedure Waivers on Delicious Rank Building Technologies Office: Current Test Procedure Waivers on Digg Find More places to share Building Technologies Office: Current Test Procedure Waivers on AddThis.com... About Standards & Test Procedures Implementation, Certification & Enforcement Rulemakings & Notices Current Rulemakings & Notices Test Procedure Waivers Recent Federal Register Notices How to Participate or Comment

205

Procedure  

Science Conference Proceedings (OSTI)

... The recording drives used in this study include the Sony DRU-510A, 700A , 800A, Pioneer DVR-A09 , Plextor PX-716SA and NEC ND -2510A . ...

206

Extending soft sets with description logics  

Science Conference Proceedings (OSTI)

Molodtsov initiated the concept of soft set theory, which can be used as a generic mathematical tool for dealing with uncertainty. Description Logics (DLs) are a family of knowledge representation languages which can be used to represent the terminological ... Keywords: Description logics, Extended soft sets, Soft sets, Terminology

Yuncheng Jiang; Yong Tang; Qimai Chen; Ju Wang; Suqin Tang

2010-03-01T23:59:59.000Z

207

Federal Agency NEPA Implementing Procedures  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agency NEPA Implementing Procedures Agency NEPA Implementing Procedures Note: Some Departments' agencies have their own NEPA implementing procedures. To access Department-wide NEPA implementing procedures, click on the name of the Federal Department. To access NEPA implementing procedures for Department's agencies, click on the provided links. Department/ Agency: Division: Link: Department of Agriculture Agricultural Research Service http://www.ecfr.gov/cgi- in/text- idx?c=ecfr&SID=47c103e07fd64e933c7f74c 4b3c4ac9a&rgn=div5&view=text&node=7:6. 1 2 1 8&id 7 Animal and Plant Health Inspection Service http://www.ecfr.gov/cgi-bin/text- idx?c=ecfr&SID=47c103e07fd64e933c7f74c 4b3c4ac9a&rgn=div5&view=text&node=7:5. 1.1.1.21&idno=7 Farm Service Agency http://www.ecfr.gov/cgi-bin/text-

208

DOE Technical Standards Program: Procedures  

NLE Websites -- All DOE Office Websites (Extended Search)

Department of Energy Technical Standards Procedures Department of Energy Technical Standards Procedures Office of Nuclear Safety The following procedures should be used to write, revise, or maintain a DOE technical standard. They are also used to convert a DOE technical standard to a non-government standard or to form a topical committee. Table of Contents (TSPP-00) Program Overview and Responsibilities (TSPP-01) Initiating DOE Technical Standards (TSPP-02) Use of Voluntary Consensus Standards and Interaction with Standards Development Organizations (TSPP-03) Developing DOE Technical Standard (TSPP-04) Coordination of Technical Standards (TSPP-05) - Draft In Concurrence Resolution - TSPP-06-2009 is the currently approved TSPP that addresses coordination of DOE Technical Standards. Approving and Issuing DOE Technical Standards (TSPP-06)

209

MITG test procedure and results  

DOE Green Energy (OSTI)

Elements and modules for Radioisotope Thermoelectric Generator have been performance tested since the inception of the RTG program. These test articles seldom resembled flight hardware and often lacked adequate diagnostic instrumentation. Because of this, performance problems were not identified in the early stage of program development. The lack of test data in an unexpected area often hampered the development of a problem solution. A procedure for conducting the MITG Test was developed in an effort to obtain data in a systematic, unambiguous manner. This procedure required the development of extensive data acquisition software and test automation. The development of a facility to implement the test procedure, the facility hardware and software requirements, and the results of the MITG testing are the subject of this paper.

Eck, M.B.; Mukunda, M.

1983-01-01T23:59:59.000Z

210

Radiation control standards and procedures  

SciTech Connect

This manual contains the Radiation Control Standards'' and Radiation Control Procedures'' at Hanford Operations which have been established to provide the necessary control radiation exposures within Irradiation Processing Department. Provision is also made for including, in the form of Bulletins'', other radiological information of general interest to IPD personnel. The purpose of the standards is to establish firm radiological limits within which the Irradiation Processing Department will operate, and to outline our radiation control program in sufficient detail to insure uniform and consistent application throughout all IPD facilities. Radiation Control Procedures are intended to prescribe the best method of accomplishing an objective within the limitations of the Radiation Control Standards. A procedure may be changed at any time provided the suggested changes is generally agreeable to management involved, and is consistent with department policies and the Radiation Control Standards.

1956-12-14T23:59:59.000Z

211

Geometric description of chemical reactions  

E-Print Network (OSTI)

We use the formalism of Geometrothermodynamics to describe chemical reactions in the context of equilibrium thermodynamics. Any chemical reaction in a closed system is shown to be described by a geodesic in a $2-$dimensional manifold that can be interpreted as the equilibrium space of the reaction. We first show this in the particular cases of a reaction with only two species corresponding to either two ideal gases or two van der Waals gases. We then consider the case of a reaction with an arbitrary number of species. The initial equilibrium state of the geodesic is determined by the initial conditions of the reaction. The final equilibrium state, which follows from a thermodynamic analysis of the reaction, is shown to correspond to a coordinate singularity of the thermodynamic metric which describes the equilibrium manifold.

Hernando Quevedo; Diego Tapias

2013-01-02T23:59:59.000Z

212

TRUPACT-II procedures and maintenance instructions  

Science Conference Proceedings (OSTI)

The purpose of this document is to provide the technical requirements for operation, inspection and maintenance of a TRUPACT-II Shipping Package and directly related components. This document shall supply the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP) and Certificate of Compliance (C of C) 9218. In the event there is a conflict between this document and the TRUPACT-II SARP (NRC Certificate of Compliance No. 9218), the TRUPACT-II SARP shall govern. This document details the operations, maintenance, repair, replacement of components, as well as the documentation required and the procedures to be followed to maintain the integrity of the TRUPACT-II container. These procedures may be modified for site use, but as a minimum all parameters and format listed herein must be included in any site modified version. For convenience and where applicable steps may be performed out of sequence. Packaging and payload handling equipment and transport trailers have been specifically designed for use with the TRUPACT-II Packaging. This document discusses the minimum required procedures for use of the adjustable center of gravity lift fixture and the TRUPACT-II transport trailer in conjunction with the TRUPACT-II Packaging.

NONE

1994-01-14T23:59:59.000Z

213

Procedure to Calculate NOx Reductions Using the Emissions & Generation Resource Integrated Database (E-Grid) Spreadsheet  

E-Print Network (OSTI)

In this report a detailed description of the procedure to calculate NOx reductions from energy savings due to the 2000 IECC code implementation in single family residences using the United States Environmental Protect Agency's (USEPA's) Emissions and Generation Resource Integrated Database (E-GRID) is presented. This procedure is proposed for calculating county-wide NOx reductions in pounds per MWh for Energy Efficiency and Renewable Energy projects (EE/RE) implemented in each Power Control Area (PCA) in the ERCOT region.

Haberl, J. S.; Im, P.; Culp, C.; Yazdani, B.; Fitzpatrick, T.; Verdict, M.; Turner, W. D.

2003-01-01T23:59:59.000Z

214

EV America Skid Test Procedure  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 Revision 1 Effective June 2008 Electromagnetic Interference and Susceptibility Test Prepared by Electric Transportation Applications Prepared by: _______________________________ Date:__________ Garrett P. Beauregard Approved by: ______________________________________________ Date: _______________ Donald B. Karner Procedure ETA-GTP004 Revision 1 2 Table of Contents 1 Objective ..................................................................................................................... 3 2 Purpose........................................................................................................................ 3 3 Documentation............................................................................................................

215

EV America Skid Test Procedure  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Revision 1 Effective June 2008 Battery Capacity and Depth of Discharge Test Prepared by Electric Transportation Applications Prepared by: _______________________________ Date:__________ Garrett P. Beauregard Approved by: ______________________________________________ Date: _______________ Donald B. Karner Procedure ETA-GTP003 Revision 1 2 Table of Contents 1 Objective ..................................................................................................................... 3 2 Purpose........................................................................................................................ 3 3 Documentation............................................................................................................

216

EV America Skid Test Procedure  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 Revision 1 Effective June 2008 Traction System Test Prepared by Electric Transportation Applications Prepared by: _______________________________ Date:__________ Garrett P. Beauregard Approved by: ______________________________________________ Date: _______________ Donald B. Karner Procedure ETA-GTP002 Revision 1 2 Table of Contents 1 Objective ..................................................................................................................... 3 2 Purpose........................................................................................................................ 3 3 Documentation............................................................................................................

217

Handbook of Academic Requirements & Procedures  

E-Print Network (OSTI)

Handbook of Academic Requirements & Procedures for the Chemistry Graduate Program PLEASE NOTE: This version of the Handbook must be used by students who start during or after the Spring 2012 semester is a central activity. 1.2 Purpose and Content of the Handbook. A detailed account of the academic requirements

Kounaves, Samuel P.

218

Handbook of Academic Requirements & Procedures  

E-Print Network (OSTI)

Handbook of Academic Requirements & Procedures for the Chemistry Graduate Program PLEASE NOTE: This version of the Handbook can be used by students who started during or before the Fall 2011 semester activity. 1.2 Purpose and Content of the Handbook. A detailed account of the academic requirements

Kounaves, Samuel P.

219

BRITISH COLUMBIA Gully Assessment Procedure  

E-Print Network (OSTI)

strategies and #12;Gully Assessment Procedure Guidebook iv prescriptions designed to accommodate resource).........................................................15 Section 5 Fan Destabilization Potential OPR 37 (1)(c), WLFMR 64 (2)(a......................................30 3. Design and construction of roads across gully systems: when to consult a qualified registered

220

FLORIDA STATE UNIVERSITY Procedures for  

E-Print Network (OSTI)

will be required that describes the purpose for the costs and the direct benefit to the proposed project's scopeFLORIDA STATE UNIVERSITY Procedures for Participant Support Costs Effective: May 15, 2006 Budgeting for Participant Costs Whenever Participant Support Costs are proposed in a budget, a detailed justification

Weston, Ken

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Microsoft Word - 338M_Geothermal_Project_Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grant Amount Project Location (City) Project Location (State) Description 1) Innovative Exploration and Drilling Projects El Paso County $5,000,000 El Paso County TX El Paso County will utilize new portable drilling technology and geological analysis techniques in Ft. Bliss, TX. Flint Geothermal LLC $4,778,234 (5 sites) CO Flint Geothermal LLC will utilize a combination of geological mapping tools to identify resources in Colorado. GeoGlobal Energy LLC $4,040,375 Gabbs NV GeoGlobal Energy LLC will combine geological with geochemical analysis to discover hidden resources in the Basin and Range region of Nevada. Geothermal Technical Partners, Inc.

222

Geothermal loan guaranty cash flow model: description and users' manual  

SciTech Connect

This is the users guide for the Geothermal Loan Guaranty Cash Flow Model (GCFM). GCFM is a Fortran code which designs and costs geothermal fields and electric power plants. It contains a financial analysis module which performs life cycle costing analysis taking into account various types of taxes, costs and financial structures. The financial module includes a discounted cash flow feature which calculates a levelized breakeven price for each run. The user's guide contains descriptions of the data requirements and instructions for using the model.

Keimig, M.A.; Rosenberg, J.I.; Entingh, D.J.

1980-11-01T23:59:59.000Z

223

PARS II Course Descriptions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptions Descriptions PARS II Course Descriptions Sign up for PARS 102 or PARS 103, depending on your project assessment role and function. PARS 104 will be offered to site contractors as part of Dekker's Contractor deployment training. # Course Name Course Description Intended Audience PARS 102 Monthly Updating and Reporting Duration: 4 hrs Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. Individuals who do not require monthly update training will be excused approximately one half hour early. FPD and Program staff who update the OA Monthly Status, but not other OA data.

224

Individual Reuse in Description Logic Reasoning  

Science Conference Proceedings (OSTI)

Tableau calculi are the state-of-the-art for reasoning in description logics (DL). Despite recent improvements, tableau-based reasoners still cannot process certain knowledge bases (KBs), mainly because they end up building very large models. To address ...

Boris Motik; Ian Horrocks

2008-08-01T23:59:59.000Z

225

Concise descriptions of subsets of structured sets  

Science Conference Proceedings (OSTI)

We study the problem of economical representation of subsets of structured sets, that is, sets equipped with a set cover. Given a structured set U, and a language L whose expressions define subsets of U, the problem of Minimum Description ...

Alberto O. Mendelzon; Ken Q. Pu

2003-06-01T23:59:59.000Z

226

Multimedia Semantic Features and Image Content Description  

Science Conference Proceedings (OSTI)

Content-based indexing and retrieval of images and video requires a proper semantic description for image content. This paper discusses the mapping of high-level, application-specific, features to the visual primitives that are accessible through image ...

M. Cavazza; R. J. Green; I. J. Palmer

1998-10-01T23:59:59.000Z

227

Qualitatitive description : light in the urban environment  

E-Print Network (OSTI)

The quality of our built environment is difficult to describe and to regulate; using light as an example, this thesis develops a descriptive framework using elementary, dynamic and connective forms. The combination of these ...

Stuebing, Susan

1986-01-01T23:59:59.000Z

228

VEHICLE DETAILS, BATTERY DESCRIPTION AND SPECIFICATIONS Vehicle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 VEHICLE DETAILS, BATTERY DESCRIPTION AND SPECIFICATIONS Vehicle Details Base Vehicle: 2011 Nissan Leaf VIN: JN1AZ0CP5BT000356 Propulsion System: BEV Electric Machine: 80 kW...

229

EMERGENCY RESPONSE ORGANIZATION TRAINING PROGRAM DESCRIPTION  

SciTech Connect

This document establishes requirements for Emergency Response Organization Training. This program description applies to all Project Hanford Management Contract (PHMC) contractor and subcontractor employees who are identified to fulfill Hanford Site Emergency Response Organization (ERO) positions.

MITCHELL, L.J.

2001-06-20T23:59:59.000Z

230

Multiple-description multistage vector quantization  

Science Conference Proceedings (OSTI)

Multistage vector quantization (MSVQ) is a technique for low complexity implementation of high-dimensional quantizers, which has found applications within speech, audio, and image coding. In this paper, a multiple-description MSVQ (MD-MSVQ) targeted ...

Pradeepa Yahampath

2007-07-01T23:59:59.000Z

231

CALIPSO Lidar Description and Performance Assessment  

Science Conference Proceedings (OSTI)

This paper provides background material for a collection of Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) algorithm papers that are to be published in the Journal of Atmospheric and Oceanic Technology. It provides a brief description ...

William H. Hunt; David M. Winker; Mark A. Vaughan; Kathleen A. Powell; Patricia L. Lucker; Carl Weimer

2009-07-01T23:59:59.000Z

232

Past DOE Technical Standards Program Procedures | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Information Center DOE Technical Standards Program DOE Technical Standards Procedures Past DOE Technical Standards Program Procedures Past DOE Technical Standards Program...

233

Building Technologies Office: Standards and Test Procedures  

NLE Websites -- All DOE Office Websites (Extended Search)

Standards and Test Standards and Test Procedures to someone by E-mail Share Building Technologies Office: Standards and Test Procedures on Facebook Tweet about Building Technologies Office: Standards and Test Procedures on Twitter Bookmark Building Technologies Office: Standards and Test Procedures on Google Bookmark Building Technologies Office: Standards and Test Procedures on Delicious Rank Building Technologies Office: Standards and Test Procedures on Digg Find More places to share Building Technologies Office: Standards and Test Procedures on AddThis.com... About Standards & Test Procedures Implementation, Certification & Enforcement Rulemakings & Notices Further Guidance ENERGY STAR® Popular Links Success Stories Previous Next Lighten Energy Loads with System Design. Learn More.

234

DNS Policies & Procedures | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

DNS Policies & Procedures DNS Policies & Procedures DNS Policy Every Federal agency must use only .gov, .mil, or Fed.us domains unless the agency head explicitly determines another...

235

EVMS Surveillance Standard Operating Procedure (ESSOP) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reporting System (PARS II) INDEPENDENT COST REVIEW (ICR) and INDEPENDENT COST ESTIMATE (ICE) Standard Operating Procedures ICR-ICE Standard Operating Procedures (Update Sept 2013)...

236

Procedures and Instructions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Access Training Records Management Processes Procedure for Conducting a Records Inventory (PDF) Procedure for Preparing a Records Inventory and Disposition Schedule (RIDS)...

237

Building Technologies Office: Test Procedure Development and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Test Procedure Development and Revision to someone by E-mail Share Building Technologies Office: Test Procedure Development and Revision on Facebook Tweet about Building...

238

Building Technologies Office: Test Procedure Waivers  

NLE Websites -- All DOE Office Websites (Extended Search)

Waivers on Twitter Bookmark Building Technologies Office: Test Procedure Waivers on Google Bookmark Building Technologies Office: Test Procedure Waivers on Delicious Rank...

239

External Independent Review (EIR) Standard Operating Procedure...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standard Operating Procedure (SOP) External Independent Review (EIR) Standard Operating Procedure (SOP) EIR SOP.pdf More Documents & Publications ICR-ICE Standard Operating...

240

Description of novelty, novelty of description: a dialectic analysis of a web-based course  

Science Conference Proceedings (OSTI)

This article proposes a theoretical framework for the identification and classification of the various processes that constitute Web-based education. The framework is based on the following premises: (1) Education may be regarded as a corrective process, ... Keywords: computer-mediated communication, distance education and telelearning, evaluation of CAL systems, post-secondary education, teaching/learning strategies

Jan J. Perold; David J. F. Maree

2003-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Policies and Procedures - Facility Use Agreements  

Science Conference Proceedings (OSTI)

... of Facilities Use Agreements: Description of the facilities use agreements ... Criteria: Guidance for applicants describing essential information about ...

2013-09-24T23:59:59.000Z

242

Low Dose Radiation Research Program: Funded Project Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Funded Project Descriptions Funded Project Descriptions Non-Invasive Early Detection and Molecular Analysis of Low X-Ray Dose Effects in the Lens Jointly funded by NASA and DOE Principal Investigator: Lee Goldstein, M.D., Ph.D., Associate Professor in Psychiatry, Neurology, Ophthalmology, Pathology and Laboratory Medicine, & Biomedical Engineering, Boston University’s School Medicine, College of Engineering, and Photonics Center. Boston, Ma. The project includes a new DOE FWP (~$400 K over 3 years) to Lawrence Berkeley National Laboratory with Eleanor Blakely as Project Leader. The work includes a subcontract to support the collaboration of Polly Chang of SRI, International, Menlo Park, CA. and is scheduled to begin as early as August 2009. This proposal was submitted in response to the joint DOE/NASA

243

Jefferson Lab Science Series - Understanding Flight: A Physical Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Physics of Stock Car Racing Physics of Stock Car Racing Previous Video (The Physics of Stock Car Racing) Science Series Video Archive Next Video (The Hidden World of Technology) The Hidden World of Technology Understanding Flight: A Physical Description of How Airplanes Fly Dr. Scott Eberhardt - University of Washington March 23, 2004 Did you ever wonder how a Boeing 747, weighing 910,000 lbs at takeoff can possibly get off the ground? Or, did you ever wonder how airplanes fly upside down? Why is there a "backside of the power curve?" What makes a wing efficient? These questions can be answered when lift is developed in terms of Newton's laws. A Newtonian description of lift gives an intuitive feel for how airplanes fly, without the need for complicated analysis or approximations. Through the application of Newton's three laws, we will

244

EV America Skid Test Procedure  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 Revision 2 Effective October 1, 2007 Braking Test Prepared by Electric Transportation Applications Prepared by: _______________________________ Date: _________ Roberta Brayer Approved by: _________________________________________________ Date: _______________ Donald Karner Procedure ETA-HTP06 Revision 2 i TABLE OF CONTENTS 1. Objectives 1 2. Purpose 1 3. Documentation 1 4. Initial Conditions and Prerequisites 1 5. Testing Activity Requirements 3 5.3 Dry Controlled Test 4 6. Glossary 5 7. References 7 Appendices Appendix A - Handling Pad Test Data Sheet 8

245

Surface Environmental Surveillance Procedures Manual  

SciTech Connect

Environmental surveillance data are used in assessing the impact of current and past site operations on human health and the environment, demonstrating compliance with applicable local, state, and federal environmental regulations, and verifying the adequacy of containment and effluent controls. SESP sampling schedules are reviewed, revised, and published each calendar year in the Hanford Site Environmental Surveillance Master Sampling Schedule. Environmental samples are collected by SESP staff in accordance with the approved sample collection procedures documented in this manual.

RW Hanf; TM Poston

2000-09-20T23:59:59.000Z

246

JOINT OFFICER MANAGEMENT PROGRAM PROCEDURES  

E-Print Network (OSTI)

implementation of the DOD Joint Officer Management (JOM) and Joint Qualification System (JQS) per references a through c. Reference a delegates the authority to the Chairman of the Joint Chiefs of Staff to establish and publish regulations and procedures to ensure compliance with the statutory and Department policy standards for DOD’s JOM program. 2. Cancellation. CJCSI 1330.02C, 24 February 2006, is cancelled. Required review of promotion selection board results policy guidance has been incorporated in this instruction.

References See Enclosure N; Responsibilities For

2008-01-01T23:59:59.000Z

247

Energy utilization analysis of buildings  

DOE Green Energy (OSTI)

The accurate calculation of the energy requirements and heating and cooling equipment sizes for buildings is one of the most important, as well as one of the most difficult, problems facing the engineer. The fundamental principles utilized in the procedures developed by American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) are explained and brief descriptions of the computer programs using these procedures are given. Such computer programs generally are capable of: simulating the thermal response of a building to all sources of heat gains and losses, accounting for all non-thermal energy requirements in the building or on the sites, translating the building operating schedules into energy demand and consumption, identifying the peak capacity requirements of heating and cooling equipment, and performing an economic analysis that would select the most economical overall owning and operating cost equipment and energy source that minimize the building's life cycle cost.

Lokmanhekim, M.

1978-06-01T23:59:59.000Z

248

Office of Fossil EnergyDetailed Core Procedures Manual Volume 1 – Core Acquisition  

E-Print Network (OSTI)

This “Core Procedures Manual, Volume 1 ” contains a description of proposed best practices for use during coring operations for the Barrow Gas Hydrate Test Well Program. This document is designed to describe the responsibilities of well site operations personnel, primarily the core acquisition contractor and coring fluids contractor, Weatherford/Omni and Halliburton/Baroid

Barrow Gas Fields

2009-01-01T23:59:59.000Z

249

Index of /research/alcator/facility/Procedures/OPS  

NLE Websites -- All DOE Office Websites (Extended Search)

OPS OPS [ICO] Name Last modified Size Description [DIR] Parent Directory - [TXT] BAKE_CHECKLIST.TXT 25-Oct-2000 16:13 127 [TXT] CRYO_STARTUP_AFTER_A_SHUTDOWN.HTML 20-Oct-2003 07:00 11K [TXT] Cryostat_Fiber_Glassing_Procedure.html 30-Apr-2002 14:43 1.5K [TXT] ECDC_PROCEDURE.HTML 09-Jan-2001 17:25 11K [TXT] GDC.HTML 01-Sep-2005 11:23 8.1K [TXT] GDC.OLD.HTML 09-Jan-2001 17:25 3.1K [TXT] GLOW_CHECKLIST.TXT 25-Oct-2000 16:13 421 [TXT] GLOW_START_STOP.TXT 30-Nov-2000 17:58 2.0K [DIR] INDIVIDUAL_RUN_PROCEDURES/ 22-May-2012 12:38 - [TXT] LN2_VALVE_ADJ_PROC.HTML 09-Jan-2001 17:25 3.0K [TXT] PRE_RUN_ENGINEERING_STARTUP.HTML 09-Jan-2001 17:24 2.8K [TXT] PRE_RUN_POWER_ROOM_TURN_ON_PROCEDURE.html 23-Mar-2006 16:52 12K

250

CSP Policies & Procedures Process for Grade Appeals  

E-Print Network (OSTI)

CSP Policies & Procedures Process for Grade Appeals Grade Appeals ­ Generally speaking, once grades

Leistikow, Bruce N.

251

SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

M.M. Ansari

2005-04-05T23:59:59.000Z

252

Business Case Slide 29: High-Value: Energy Uses - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Uses - Description Previous Slide Next Slide Table of Contents High-Value: Energy Uses - Description Description Use DUO2 as the core component of advanced energy systems Fuel cell...

253

Inspection system performance test procedure  

SciTech Connect

This procedure establishes requirements to administer a performance demonstration test. The test is to demonstrate that the double-shell tank inspection system (DSTIS) supplied by the contractor performs in accordance with the WHC-S-4108, Double-Shell Tank Ultrasonic Inspection Performance Specification, Rev. 2-A, January, 1995. The inspection system is intended to provide ultrasonic (UT) and visual data to determine integrity of the Westinghouse Hanford Company (WHC) site underground waste tanks. The robotic inspection system consists of the following major sub-systems (modules) and components: Mobile control center; Deployment module; Cable management assembly; Robot mechanism; Ultrasonic testing system; Visual testing system; Pneumatic system; Electrical system; and Control system.

Jensen, C.E.

1995-01-17T23:59:59.000Z

254

Microsoft Word - HQ ISM System Description Final  

National Nuclear Security Administration (NNSA)

NA-1 SD 450.4-1 NA-1 SD 450.4-1 Approved: 10-23-07 National Nuclear Security Administration Headquarters Integrated Safety Management System Description This NNSA Headquarters Integrated Safety Management System Description describes the NNSA Headquarters role in establishing expectations and accomplishing work in a safe and environmentally sound manner to successfully execute the NNSA mission and strategic goals. NNSA senior managers strongly support and are personally committed to implementation of the policy and principles of Integrated Safety Management. Approved: &? .> ,& o & k Thomas P. D7Ago, tino Administrator h Table of Contents EXECUTIVE SUMMARY .............................................................................................................

255

Void fraction system computer software design description  

DOE Green Energy (OSTI)

This document describes the software that controls the void fraction instrument. The format of the document may differ from typical Software Design Reports because it was created with a graphical programming language. Hardware is described in Section 2. The purpose of this document is describe the software, so the hardware description is brief. Software is described in Section 3. LabVIEW was used to develop the viscometer software, so Section 3 begins with an introduction to LabVIEW. This is followed by a description of the main program. Finally each Westinghouse developed subVI (sub program) is discussed.

Gimera, M.

1995-02-15T23:59:59.000Z

256

Survey of sampling-based methods for uncertainty and sensitivity analysis.  

Science Conference Proceedings (OSTI)

Sampling-based methods for uncertainty and sensitivity analysis are reviewed. The following topics are considered: (1) Definition of probability distributions to characterize epistemic uncertainty in analysis inputs, (2) Generation of samples from uncertain analysis inputs, (3) Propagation of sampled inputs through an analysis, (4) Presentation of uncertainty analysis results, and (5) Determination of sensitivity analysis results. Special attention is given to the determination of sensitivity analysis results, with brief descriptions and illustrations given for the following procedures/techniques: examination of scatterplots, correlation analysis, regression analysis, partial correlation analysis, rank transformations, statistical tests for patterns based on gridding, entropy tests for patterns based on gridding, nonparametric regression analysis, squared rank differences/rank correlation coefficient test, two dimensional Kolmogorov-Smirnov test, tests for patterns based on distance measures, top down coefficient of concordance, and variance decomposition.

Johnson, Jay Dean; Helton, Jon Craig; Sallaberry, Cedric J. PhD. (.; .); Storlie, Curt B. (Colorado State University, Fort Collins, CO)

2006-06-01T23:59:59.000Z

257

Microsoft Word - 338M_Geothermal_Project_Descriptions | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Marketing Administration Other Agencies You are here Home Microsoft Word - 338MGeothermalProjectDescriptions Microsoft Word - 338MGeothermalProjectDescriptions Microsoft...

258

Business Case Slide 6: High-Volume: Repository - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Volume: Repository - Description Description of potential uses Structural component of cask (basket, wall) as a cermet Cermet: DUO2 particles embedded in steel matrix Fill material...

259

Business Case Slide 22: High-Value: Catalysts - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysts - Description Graduate student examining candidate DU-bearing catalyst Graduate student examining candidate DU-bearing catalyst Description Use DUO2 to catalyze chemical...

260

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Technology Description Property Type Text Pages using the property "Technology Description" Showing 25 pages using this property. (previous 25) (next 25) M MHK Technologies/14 MW OTECPOWER + MINIMIZE SURFACE ACTIVITIES TO REDUCE THE CAPITAL COST AND TO IMPROVE EFFICIENCY ALTERNATE WORKING FLUIDS ARE USED FOR ENHANCED POWER EFFICIENCY IN OPTEC POWER HYBRID CYCLES ARE USED TO IMPROVE POWER AND NEED WITH SUBSEA HEAT EXCHANGERS ADVANCED SUPPORTING VESSEL CONCEPT AND FREE STANDING RISER TECHNOLOGIES TO WITH STAND HARSH OCEAN ENVIRONMENT IN DEEPWATER HAD BEEN DEVELOPED FOR THIS OPTEC POWER IT IS THE ONLY RELIABLE AND PROFITABLE RENEWABLE ENERGY SOURCE FOR THE NEED OF WORLD ENERGY FOR THE NEXT DECADE DESALINATION AND HDROGEN PRODUCTION ARE LINKED TO THE POWER GENERATION OF THE OTEC POWER FOR SEVERAL BY PRODUCTS COST EFFECTIVE PRODUCTION CLEAN ENERGY AND CLEAN WATER IS THE GOAL OF OTECPOWER INC OUR 14 MW OTEC POWER COSTS 50 MILLION USD ALL EQUIPMENT HAD BEEN DESINGED AND A FEW OF THEM ARE TESTED FOR OIL AND GAS INDUSTRY APPLICATION WHICHA RE BEING USED FOR OTECPOWER A RELIABLE AND FEASIBLE OTECPOWER IS PROPOSED

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Description of master thesis Robotic transportation  

E-Print Network (OSTI)

Description of master thesis Robotic transportation Jan Holdgaard-Thomsen & Søren Markersen In hospitals a significant amount of resources is spent on transportation of goods, e.g. blood samples, medicine, food, and trash. Usually these transportation tasks are carried out by humans. A current research

Bolander, Thomas

262

Beth definability in expressive description logics  

Science Conference Proceedings (OSTI)

The Beth definability property, a well-known property from classical logic, is investigated in the context of description logics (DLs): if a general LTBox implicitly defines an L-concept in terms of a given signature, where L is a DL, then does there ...

Balder Ten Cate; Enrico Franconi; ?nanç Seylan

2011-07-01T23:59:59.000Z

263

Dry Ice vs. Pipette Experiment Description  

E-Print Network (OSTI)

Dry Ice vs. Pipette Experiment Description Dry ice (solid) is put into the bulb of a pipette, plastic pipette 1 ice cube sized piece of dry ice Butter knife (or some object to break dry ice) Gloves (surgical gloves will not work, they must protect hands from dry ice) Safety glasses for demonstrator

264

Latent semantic description of iconic scenes  

Science Conference Proceedings (OSTI)

It is proposed an approach for the automatic description of scenes using a LSA–like technique. The described scenes are composed by a set of elements that can be geometric forms or iconic representation of objects. Every icon is characterized by ...

Filippo Vella; Giovanni Pilato; Giorgio Vassallo; Salvatore Gaglio

2005-10-01T23:59:59.000Z

265

Residential photovoltaic power conditioner subsystem test procedures  

DOE Green Energy (OSTI)

The inspections to be made, the conditions for measurement, the variables to be measured and the analyses to be performed in order to characterize the operation of a power-conditioning subsystem (PCS) are described. Of primary concern is the small, utility-interactive PCS in the 2- to 10-kW power range for use in a residential photovoltaic (PV) system feeding a single-phase 120/240-volt line. The procedure is broken down into four main tasks: analysis of the design, tests under nominal conditions, tests under extreme conditions, and accelerated environmental stress tests. The results of these tests will provide an objective assessment of PCS performance under the full range of conditions likely to be encountered in actual applications.

Cox, III, C. H.

1982-02-01T23:59:59.000Z

266

Water-to-Cement Distance Analysis Software  

Science Conference Proceedings (OSTI)

Water-to-Cement Distance Analysis Software. Description/Summary: ... Type of software: Analysis Software of Water-to-Cement Distance Analysis. ...

2013-06-11T23:59:59.000Z

267

Remote Sensing of Natural Areas: Procedures and Considerations for  

E-Print Network (OSTI)

1 Remote Sensing of Natural Areas: Procedures and Considerations for Assessing Vegetation Ecosystems and Remote Sensing Program Introduction Remote sensing can be defined as the acquisi- tion for rapid analysis. In the last Technical Report, we provided an in- troduction to how remote sensing can

268

The Fundamentals of Forensic Investigation Procedures Guidebook  

Science Conference Proceedings (OSTI)

No reference or guideline for the practice of or procedure for analyzing equipment failures and accidents involving electric utility distribution systems has been available until publication of "The Fundamentals of Forensic Investigation Procedures Guidebook."

2003-03-18T23:59:59.000Z

269

WRAP Trupact Loading System Operational Test Procedure  

Science Conference Proceedings (OSTI)

This procedure has been prepared to verify the TRUPACT System (TS) operates in accordance with system design and specifications.

DOSRAMOS, E.V.

1999-09-01T23:59:59.000Z

270

Descriptive analysis of aquifer thermal energy storage systems  

DOE Green Energy (OSTI)

The technical and economic feasibility of large-scale aquifer thermal energy storage (ATES) was examined. A key to ATESs attractiveness is its simplicity of design and construction. The storage device consists of two ordinary water wells drilled into an aquifer, connected at the surface by piping and a heat exchanger. During the storage cycle water is pumped out of the aquifer, through the heat exchanger to absorb thermal energy, and then back down into the aquifer through the second well. The thermal storage remains in the aquifer storage bubble until required for use, when it is recovered by reversing the storage operation. For many applications the installation can probably be designed and constructed using existing site-specific information and modern well-drilling techniques. The potential for cost-effective implementation of ATES was investigated in the Twin Cities District Heating-Cogeneration Study in Minnesota. In the study, ATES demonstrated a net energy saving of 32% over the nonstorage scenario, with an annual energy cost saving of $31 million. Discounting these savings over the life of the project, the authors found that the break-even capital cost for ATES construction was $76/kW thermal, far above the estimated ATES development cost of $23 to 50/kW thermal. It appears tht ATES can be highly cost effective as well as achieve substantial fuel savings. ATES would be environmentally beneficial and could be used in many parts of the USA. The existing body of information on ATES indicates that it is a cost-effective, fuel-conserving technique for providing thermal energy for residential, commercial, and industrial users. The negative aspects are minor and highly site-specific, and do not seem to pose a threat to widespread commercialization. With a suitable institutional framework, ATES promises to supply a substantial portion of the nation's future energy needs. (LCL)

Reilly, R.W.

1980-06-01T23:59:59.000Z

271

Business Case Slide 32: Regulatory Constraints Analysis (ANL...  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulatory Constraints Analysis (ANL) - Description Description Enabling activity cross-cutting all potential uses of DU in radiologically unregulated areas Tasks Evaluate...

272

Reasoning with rough description logics: An approximate concepts approach  

Science Conference Proceedings (OSTI)

The current research progress and the existing problems of uncertain or imprecise knowledge representation and reasoning in description logics are analyzed in this paper. Approximate concepts are introduced to description logics based on rough set theory, ... Keywords: Approximate concepts, Concepts, Description logics, Rough description logics, Rough set theory

Yuncheng Jiang; Ju Wang; Suqin Tang; Bao Xiao

2009-02-01T23:59:59.000Z

273

Standard-C hydrogen monitoring system, system design description  

DOE Green Energy (OSTI)

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

274

Description of Energy Intensity Tables (12)  

U.S. Energy Information Administration (EIA) Indexed Site

3. Description of Energy Intensity Data Tables 3. Description of Energy Intensity Data Tables There are 12 data tables used as references for this report. Specifically, these tables are categorized as tables 1 and 2 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1985, 1988, 1991, and 1994; along with the percentage changes between 1985 and the three subsequent years (1988, 1991, and 1994) tables 3 and 4 present 1988, 1991, and 1994 energy-intensity ratios that have been adjusted to the mix of products shipped from manufacturing establishments in 1985 tables 5 and 6 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1988, 1991, and 1994; along with the percentage changes between 1988 and the two subsequent

275

Functional Description for UTWorkstation 5.0  

Science Conference Proceedings (OSTI)

This report, a "Functional Description" or "FD", describes improvements for the EPRI Underground Transmission Workstation (UTW) to make the programs in the workstation more useful and easier to use. The information described in this report is based on a survey and meeting of member utility advisors that provided comments on desirable features, errors ("bugs") and other changes that should be made based upon their current needs at their respective utilities. In addition to describing software changes, the...

2005-09-30T23:59:59.000Z

276

Waste management project technical baseline description  

SciTech Connect

A systems engineering approach has been taken to describe the technical baseline under which the Waste Management Project is currently operating. The document contains a mission analysis, function analysis, requirement analysis, interface definitions, alternative analysis, system definition, documentation requirements, implementation definitions, and discussion of uncertainties facing the Project.

Sederburg, J.P.

1997-08-13T23:59:59.000Z

277

Piecewise Linear Modeling and Analysis  

Science Conference Proceedings (OSTI)

From the Publisher:Piecewise Linear Modeling and Analysis explains in detail all possible model descriptions to efficiently store piecewise linear functions starting with the Chua descriptions. Detailed explanation on how the model parameter can be obtained ...

Domine M. W. Leenaerts; Wim M. Van Bokhoven

1998-07-01T23:59:59.000Z

278

An Observational and Numerical Study of a Sheared, Convective Boundary Layer. Part I: Phoenix II Observations, Statistical Description, and Visualization  

Science Conference Proceedings (OSTI)

Four-dimensional velocity fields derived from dual Doppler radar observations are the basis of a description and statistical analysis of a convective, sheared planetary boundary layer during an afternoon over the High Plains of eastern Colorado. ...

Jeanne M. Schneider; Douglas K. Lilly

1999-09-01T23:59:59.000Z

279

Slimhole Handbook- Procedures And Recommendations For Slimhole Drilling And  

Open Energy Info (EERE)

Slimhole Handbook- Procedures And Recommendations For Slimhole Drilling And Slimhole Handbook- Procedures And Recommendations For Slimhole Drilling And Testing In Geothermal Exploration Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report: Slimhole Handbook- Procedures And Recommendations For Slimhole Drilling And Testing In Geothermal Exploration Details Activities (27) Areas (8) Regions (0) Abstract: No abstract prepared. Author(s): Jim Combs, John T. Finger, Colin Goranson, Charles E. Hockox Jr., Ronald D. Jacobsen, Gene Polik Published: Geothermal Technologies Legacy Collection, 1999 Document Number: Unavailable DOI: Unavailable Source: View Original Report Acoustic Logs At Newberry Caldera Area (Combs, Et Al., 1999) Acoustic Logs At Steamboat Springs Area (Combs, Et Al., 1999) Core Analysis At Fort Bliss Area (Combs, Et Al., 1999)

280

Shell model description of zirconium isotopes  

Science Conference Proceedings (OSTI)

We calculate the low-lying spectra and several high-spin states of zirconium isotopes (Z=40) with neutron numbers from N=50 to N=58 using a large valence space with the {sup 78}Ni inert core, which a priori allows one to study the interplay between spherical and deformed configurations, necessary for the description of nuclides in this part of the nuclear chart. The effective interaction is derived by monopole corrections of the realistic G matrix. We reproduce essential nuclear properties, such as subshell closures in {sup 96}Zr and {sup 98}Zr. The spherical-to-deformed shape transition in {sup 100}Zr is addressed as well.

Sieja, K. [GSI-Helmholtzzentrum fuer Schwerionenforschung mbH., Planckstrasse 1, D-64-220 Darmstadt (Germany); Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt (Germany); Nowacki, F. [Institute Pluridisciplinaire Hubert Curien, 23 rue du Loess, Strasbourg (France); Langanke, K. [Institut fuer Kernphysik, Technische Universitaet Darmstadt, D-64289 Darmstadt (Germany); Frankfurt Institute for Advanced Studies, D-60438 Frankfurt am Main (Germany); Martinez-Pinedo, G. [GSI-Helmholtzzentrum fuer Schwerionenforschung mbH., Planckstrasse 1, D-64-220 Darmstadt (Germany)

2009-06-15T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

A correspondence between temporal description logics  

E-Print Network (OSTI)

ABSTRACT. In this paper, we investigate the relationship between two decidable interval-based temporal description logics that have been proposed in the literature, T L-ALCF and ALCF(A). Although many aspects of these two logics are quite similar, the two logics suggest two rather different paradigms for representing temporal conceptual knowledge. In this paper, we exhibit a reduction from T L-ALCF concepts to ALCF(A) concepts that serves two purposes: first, it nicely illustrates the relationship between the two knowledge representation paradigms; and second, it provides a tight PSPACE upper bound for T L-ALCF concept satisfiabiliy, whose complexity was previously unknown.

Ro Artale; Carsten Lutz; Tu Dresden (germany

1999-01-01T23:59:59.000Z

282

System design description PFP thermal stabilization  

SciTech Connect

The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing P1ant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing to meet the 3013 storage requirements. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: function design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides.

RISENMAY, H.R.

1998-11-10T23:59:59.000Z

283

First semiannual report: Rocky Flats Small Wind Systems Test Center activities. Volume I. Description of the National Small Wind Systems Test Center  

DOE Green Energy (OSTI)

Information is presented concerning the Rocky Flats wind turbine test site; the philosophy of testing at Rocky Flats; test procedure development; atmospheric SWECS testing; SWECS component testing; data collection, handling, and analysis; reporting procedures; and future plans.

None

1978-09-28T23:59:59.000Z

284

Test Procedure Waivers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Appliance & Equipment Standards » Rulemakings & Notices » Test Appliance & Equipment Standards » Rulemakings & Notices » Test Procedure Waivers Test Procedure Waivers Products covered by standards change as manufacturers add new features to their products and update designs in order to compete for consumers. Innovation and product development occasionally causes products to change in ways that either (1) make the results of a test procedure unrepresentative of actual energy use or efficiency, or (2) make it impossible to test in accordance with the relevant test procedure. For this reason, the Department of Energy (DOE) considers petitions for waivers from test procedures under certain circumstances. In general, any interested party-typically a manufacturer-may submit a petition for a test procedure waiver for a basic model of a covered product

285

Building Technologies Office: Current Test Procedure Waivers  

NLE Websites -- All DOE Office Websites (Extended Search)

Test Procedure Waivers Test Procedure Waivers The U.S. Department of Energy's (DOE) regulations for covered products permit a person to seek a waiver, or an interim waiver, from the test procedure requirements for covered appliances and commercial equipment if certain criteria are satisfied. Regulations applicable to test procedure waivers for appliances can be found at 10 CFR 430.27; those applicable to test procedure waivers for commercial equipment are at 10 CFR 431.401. This table lists all waivers to test procedures that DOE has granted and that are still in effect. The links to the notices provide access to the dockets in Regulations.gov, which contain all notices and public comments. For more information, please email: AS_Waiver_Requests@ee.doe.gov The links to the notices provides access to the docket in regulations.gov, which contains all notices and public comments.

286

Environmental Program Description for the Tank Farm Contractor  

SciTech Connect

This Environmental Program Description has been developed in support of the Integrated Environmental, Safety, and Health Management System and consistent with the goals of DOE/RL-96-50, Hanford Strategic Plan. This Environmental Program Plan was developed in support of the Integrated Environment, Safety, and Health Management System Description for the Tank Farm Contractor (ISMS) (RPP-MP-003), which establishes a single, defined environmental, safety, and health management system that integrates requirements into the work planning and execution processes to protect workers, the public, and the environment. The ISMS also provides mechanisms for increasing worker involvement in work planning, including hazard and environmental impact identification, analysis, and control; work execution; and feedback/improvement processes. The ISMS plan consists of five core functions. Each section of this plan describes the activities (formerly known as the Tank Waste Remediation System) of the Tank Farm Contractor (TFC) environmental organization according to the following core functions: Establish Environmental Policy and Define Work Scope; Identify Hazards, Environmental Impacts, and Requirements; Analyze Hazards and Environmental Impacts and Implement Controls; Provide Feedback and Continuous Improvement; and Perform Work within Controls.

POWELL, P.A.

2000-04-20T23:59:59.000Z

287

Focused Crawling of the Deep Web Using Service Class Descriptions  

Science Conference Proceedings (OSTI)

Dynamic Web data sources--sometimes known collectively as the Deep Web--increase the utility of the Web by providing intuitive access to data repositories anywhere that Web access is available. Deep Web services provide access to real-time information, like entertainment event listings, or present a Web interface to large databases or other data repositories. Recent studies suggest that the size and growth rate of the dynamic Web greatly exceed that of the static Web, yet dynamic content is often ignored by existing search engine indexers owing to the technical challenges that arise when attempting to search the Deep Web. To address these challenges, we present DynaBot, a service-centric crawler for discovering and clustering Deep Web sources offering dynamic content. DynaBot has three unique characteristics. First, DynaBot utilizes a service class model of the Web implemented through the construction of service class descriptions (SCDs). Second, DynaBot employs a modular, self-tuning system architecture for focused crawling of the DeepWeb using service class descriptions. Third, DynaBot incorporates methods and algorithms for efficient probing of the Deep Web and for discovering and clustering Deep Web sources and services through SCD-based service matching analysis. Our experimental results demonstrate the effectiveness of the service class discovery, probing, and matching algorithms and suggest techniques for efficiently managing service discovery in the face of the immense scale of the Deep Web.

Rocco, D; Liu, L; Critchlow, T

2004-06-21T23:59:59.000Z

288

A general design for energy test procedures  

SciTech Connect

Appliances are increasingly controlled by microprocessors. Unfortunately, energy test procedures have not been modified to capture the positive and negative contributions of the microprocessor to the appliance's energy use. A new test procedure is described which captures both the mechanical and logical features present in many new appliances. We developed an energy test procedure for refrigerators that incorporates most aspects of the proposed new approach. Some of the strengths and weaknesses of the new test are described.

Meier, Alan

2000-06-15T23:59:59.000Z

289

COG Software Architecture Design Description Document  

SciTech Connect

This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

Buck, R M; Lent, E M

2009-09-21T23:59:59.000Z

290

Standards and Test Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standards and Test Procedures Standards and Test Procedures Standards and Test Procedures The Department of Energy (DOE) establishes energy efficiency standards for certain appliances and equipment, and currently covers more than 50 different products. Authority to undertake this effort was granted by Congress, and DOE follows a four phase process when reviewing existing and developing new standards. Each Product page provides information on recent updates, current standards and test procedures, waivers, exceptions, and exemptions, statutory authority, and historical information. For information on current Rulemakings, visit Current Rulemaking and Notices. Consumer Products Battery Chargers and External Power Supplies Ceiling Fans Central Air Conditioners and Heat Pumps Clothes Dryers

291

Building Technologies Office: Standards and Test Procedures  

NLE Websites -- All DOE Office Websites (Extended Search)

icon Public Meetings & Comment Deadlines Newsletter Recent Federal Register Notices Standards and Test Procedures The Department of Energy (DOE) establishes energy efficiency...

292

Minnesota Environmental Coordination Procedures Act (Minnesota) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Minnesota Environmental Coordination Procedures Act (Minnesota) Minnesota Environmental Coordination Procedures Act (Minnesota) Minnesota Environmental Coordination Procedures Act (Minnesota) < Back Eligibility Utility Fed. Government Commercial Agricultural Investor-Owned Utility State/Provincial Govt Industrial Construction Municipal/Public Utility Local Government Residential Installer/Contractor Rural Electric Cooperative Tribal Government Low-Income Residential Schools Retail Supplier Institutional Multi-Family Residential Systems Integrator Fuel Distributor Nonprofit General Public/Consumer Transportation Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Minnesota Program Type Siting and Permitting This Act is designed to streamline the review procedures for a given

293

SPR Acquisition Procedures - Final Rulemaking | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Director of Operatons and Readiness, Strategic Petroleum Reserve, (202) 586-4691 SPR Crude Oil Acquisition Procedures - Final Rulemaking More Documents & Publications Price...

294

Slimhole Handbook- Procedures And Recommendations For Slimhole...  

Open Energy Info (EERE)

Slimhole Handbook- Procedures And Recommendations For Slimhole Drilling And Testing In Geothermal Exploration Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report:...

295

Slimhole Handbook- Procedures and Recommendations for Slimhole...  

Open Energy Info (EERE)

SAND99-1976 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Slimhole Handbook- Procedures and Recommendations for Slimhole Drilling and...

296

Laser Controlled Area Standard Operating Procedure (SOP)  

NLE Websites -- All DOE Office Websites (Extended Search)

PROCEDURE (SOP) This document defines the safety management program for the laser system listed below. All American National Standard Institute (ANSI) Hazard Class 3b and 4...

297

Microsoft Word - RM Procedures.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Records Management Procedures for Storage, Transfer and Retrieval of Records from WNRC RETIREMENT OF RECORDS 1. The Program Office is responsible for originating the Records...

298

Additional Guidance Regarding Application of Current Procedures...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010 Additional Guidance...

299

Eder Acquisition 2007 Habitat Evaluation Procedures Report.  

DOE Green Energy (OSTI)

A habitat evaluation procedures (HEP) analysis was conducted on the Eder acquisition in July 2007 to determine how many protection habitat units to credit Bonneville Power Administration (BPA) for providing funds to acquire the project site as partial mitigation for habitat losses associated with construction of Grand Coulee and Chief Joseph Dams. Baseline HEP surveys generated 3,857.64 habitat units or 1.16 HUs per acre. HEP surveys also served to document general habitat conditions. Survey results indicated that the herbaceous plant community lacked forbs species, which may be due to both livestock grazing and the late timing of the surveys. Moreover, the herbaceous plant community lacked structure based on lower than expected visual obstruction readings (VOR); likely a direct result of livestock impacts. In addition, introduced herbaceous vegetation including cultivated pasture grasses, e.g. crested wheatgrass and/or invader species such as cheatgrass and mustard, were present on most areas surveyed. The shrub element within the shrubsteppe cover type was generally a mosaic of moderate to dense shrubby areas interspersed with open grassland communities while the 'steppe' component was almost entirely devoid of shrubs. Riparian shrub and forest areas were somewhat stressed by livestock. Moreover, shrub and tree communities along the lower reaches of Nine Mile Creek suffered from lack of water due to the previous landowners 'piping' water out of the stream channel.

Ashley, Paul R.

2008-01-01T23:59:59.000Z

300

Business Case Slide 25: High-Value: Semiconductors - Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Semiconductors - Description Receipt of rare DUO crystals at ORNL Receipt of rare DUO2 crystals at ORNL Description Use DUO2 as a semiconductor material Computer CPU or RAM chips...

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

System design description for the HMT Rotation Motor Heater System  

SciTech Connect

This document is the design description for the Rotation Motor Heater System on waste tank 241-SY-101. The description includes the certified vendor (CV) file number, operators instructions, and heater sizing calculations.

Vargo, G.F. Jr.

1995-05-18T23:59:59.000Z

302

Exploring the role of model parameters and regularization procedures in the thermodynamics of the PNJL model  

E-Print Network (OSTI)

The equation of state and the critical behavior around the critical end point are studied in the context of the Polyakov--Nambu--Jona--Lasinio model. We prove that a convenient choice of the model parameters is crucial to get the correct description of isentropic trajectories. The physical relevance of the effects of the regularization procedure is insured by the agreement with general thermodynamic requirements. The results are compared with simple thermodynamic expectations and lattice data.

M. C. Ruivo; Pedro Costa; H. Hansen; C. A. de Sousa

2010-01-18T23:59:59.000Z

303

Description of the Google update summarizer at TAC-2011  

Science Conference Proceedings (OSTI)

Page 1. Description of the Google update summarizer at TAC-2011 Jean-Yves Delort Google Research Brandschenkestrasse ...

2012-03-27T23:59:59.000Z

304

PCR Kit Name Manufacturer Kit Description Profiler Plus ...  

Science Conference Proceedings (OSTI)

Page 1. PCR Kit Name Manufacturer Kit Description Profiler Plus Applied Biosystems AmpFLSTR® Profiler Plus™ (Part Number 4303326) ...

2010-06-29T23:59:59.000Z

305

SY101 in situ viscometer instrument system design description  

DOE Green Energy (OSTI)

This documents the design and description of the in situ viscometer, developed for the hydrogen mitigation project.

Pearce, K.L.; Stokes, T.I.; Vagelatos, N.

1994-08-18T23:59:59.000Z

306

MCDL: a reduced but extensible multimedia contents description language  

Science Conference Proceedings (OSTI)

Multimedia contents are more and more present in our life and their presentation usually rests on a text-based description that defines rules and properties of such contents and is produced by markup description languages (e.g., XML, MPEG7-DDL and SMIL). ... Keywords: MPEG7-DDL, SMIL, contents sychronization, multimedia contents description

M. Furini

2007-03-01T23:59:59.000Z

307

Code of Federal Regulations PROCEDURAL RULES FOR DOE NUCLEAR...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PROCEDURAL RULES FOR DOE NUCLEAR ACTIVITIES Code of Federal Regulations PROCEDURAL RULES FOR DOE NUCLEAR ACTIVITIES This part sets forth the procedures to govern the conduct of...

308

PROCEDURE FOR CONDUCTING A RECORDS INVENTORY | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONDUCTING A RECORDS INVENTORY PROCEDURE FOR CONDUCTING A RECORDS INVENTORY PROCEDURE FOR CONDUCTING A RECORDS INVENTORY PROCEDURE FOR CONDUCTING A RECORDS INVENTORY More Documents...

309

Lockout-Tagout Standard Operating Procedures, Policy 2010-002...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lockout-Tagout Standard Operating Procedures, Policy 2010-002 Lockout-Tagout Standard Operating Procedures, Policy 2010-002 Lockout-Tagout Standard Operating Procedures for...

310

Controllable procedural map generation via multiobjective evolution  

Science Conference Proceedings (OSTI)

This paper shows how multiobjective evolutionary algorithms can be used to procedurally generate complete and playable maps for real-time strategy (RTS) games. We devise heuristic objective functions that measure properties of maps that impact important ... Keywords: Evolutionary computation, Multiobjective optimisation, Procedural content generation, RTS, Real-time strategy games, StarCraft

Julian Togelius; Mike Preuss; Nicola Beume; Simon Wessing; Johan Hagelbäck; Georgios N. Yannakakis; Corrado Grappiolo

2013-06-01T23:59:59.000Z

311

Irrigation customer survey procedures and results  

SciTech Connect

This report describes the statistical procedures, administrative procedures, and results of a telephone survey designed to collect primary data from individuals in the Pacific Northwest region who use electricity in irrigating agricultural crops. The project was intended to collect data useful for a variety of purposes, including conservation planning, load forecasting, and rate design.

Harrer, B.J.; Johnston, J.W.; Dase, J.E.; Hattrup, M.P.; Reed, G.

1987-03-01T23:59:59.000Z

312

PHYSICAL PLANT OPERATING POLICY AND PROCEDURE  

E-Print Network (OSTI)

PHYSICAL PLANT OPERATING POLICY AND PROCEDURE PP/OP 04.07: Insulation, Asbestos Containing Building for the implementation and maintenance of an active insulation, asbestos containing building material abatement program is identified. 2. Procedures a. Insulation and Asbestos Containing Building Material Removal (1) Only certified

Gelfond, Michael

313

COLORADO SCHOOL OF MINES EMERGENCY MANAGEMENT PROCEDURE  

E-Print Network (OSTI)

COLORADO SCHOOL OF MINES EMERGENCY MANAGEMENT PROCEDURE #12;INTRODUCTION COLORADO SCHOOL OF MINES EMERGENCY MANAGEMENT PROCEDURE 1 EMERGENCY PREPAREDNESS AT THE COLORADO SCHOOL OF MINES Emergencies and psychologically prepared to handle unexpected emergencies is an individual, as well as an organizational

314

Void fraction instrument acceptance test procedure  

DOE Green Energy (OSTI)

This acceptance test procedure (ATP) was written to test the void fraction instrument (VFI) and verify that the unit is ready for field service. The procedure verifies that the mechanical and electrical features (not specifically addressed in the software ATP) and software alarms are operating as designed.

Pearce, K.L.

1994-09-15T23:59:59.000Z

315

Geological formation - drill string dynamic interaction finite-element program (GEODYN). Phase 1. Theoretical description  

DOE Green Energy (OSTI)

The Theoretical Description for the GEODYN interactive finite-element computer program is presented. The program is capable of performing the analysis of the three-dimensional transient dynamic response of a Polycrystalline Diamond Compact Bit-Bit Sub arising from the intermittent contact of the bit with the downhole rock formations. The program accommodates nonlinear, time-dependent, loading and boundary conditions.

Baird, J.A.; Apostal, M.C.; Rotelli, R.L. Jr.; Tinianow, M.A.; Wormley, D.N.

1984-06-01T23:59:59.000Z

316

Property:Description | Open Energy Information  

Open Energy Info (EERE)

This is a property of type Text. This is a property of type Text. Pages using the property "Description" Showing 25 pages using this property. (previous 25) (next 25) 1 1.5-ft Wave Flume Facility + Automated data acquisition and control system 10-ft Wave Flume Facility + Automated data acquisition and control system 11-ft Wave Flume Facility + Automated data acquisition and control system 2 2-ft Flume Facility + Automated data acquisition and control system 3 3-ft Wave Flume Facility + Automated data acquisition and control system 5 5-ft Wave Flume Facility + Automated data acquisition and control system 6 6-ft Wave Flume Facility + Automated data acquisition and control system A Alden Large Flume + Differential pressure transducers, acoustic profiling, propeller meters, load cells, computer data acquisition systems.

317

Project_Descriptions_ITP_ARRA_Awards.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Selections for Industrial Technologies Program Recovery Act Funding Selections for Industrial Technologies Program Recovery Act Funding Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment Award Winners City and State Project Description Total DOE Funding Air Products and Chemicals, Inc. Middletown, OH Waste Energy Project at the AK Steel Corporation Middletown Works. The project will construct a combined cycle power generation plant at the Middletown, OH, works of AK Steel that will capture and process the blast furnace gas (BFG). The BFG, generated in ironmaking operations, is either flared or used to make steam needed for industrial processes . Currently, over 50% of the BFG is flared. This project will utilize

318

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Acquisition Acquisition Description/ Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference/ Industry Meetings Draft- Solicitation Synopsis Solicitation Receipt of Proposal Anticipated Evaluations Complete/Award Paducah GDP http://www.emcbc.doe.g ov/pgdp%20deactivatio n/ EMCBC Multiple award IDIQ contract holders Cost Plus Award Fee with Fixed Price clins $600M- $680M 5/1/2013 5/29/2013 N/A 8/9/2013 Jul-Sep 2013 Oct-Dec 2014 ETEC EMCBC Small Business Firm-Fixed Price & Fixed Unit Rate Price CLINS $25M-$40M 9/19/2013 Jul-Sep 2013 Oct-Dec 2013 Oct-Dec 2013 Jan-Mar 2014 Jul-Sep 2014 Lab Services EMCBC Small Business Fixed Price $40M-$60M Jan-Mar 2014 Jan-Mar 2014 Jan-Mar 2014 Apr-Jun 2014 Apr-Jun 2014 Jan-Mar 2015

319

INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO  

Office of Legacy Management (LM)

INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO )ATE COMPLETED: ACTION NUMBER: I ! I I DOCUMENT CONTROL DATE INITIALS DATA BASE: ACTION LOG: FILED: To : Doug Tonkay, OTS Decen From: MIchele Landis, dRW Subject: Draft report ~ Result= of the Radiologic; Former Ore Storage Site, Palmerton, Pennsylvania Attached is one copy of the draft report. PIE provide your comments to me by January 16, 1990. tlichele Landis ,9, 1989 "ey at the review and Results of the Radiological SJrvey at the Former Ore S&age Site, Palmerton, PennsylvLnia (PPOOI) J. L Quikd J. W. Cdchdr W. D. &rei ! I : HEALTH AND t5UEI-Y RESEARCH DMSi Waste Management Research and Development Prc (Activity No. AH 10 05 00 0; NEAHOOl) RESULTS OF 'I-HE RADIOLOGICAL SURV

320

Title, Location, Document Number Estimated Cost Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moody to Lev, SUBJECT: NEPA 2012 APS for DOE-SRS, Dated: JAN 25 2012 Moody to Lev, SUBJECT: NEPA 2012 APS for DOE-SRS, Dated: JAN 25 2012 Title, Location, Document Number Estimated Cost Description EA Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain EA Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $65,000 Annual NEPA Planning Summary NEPA Reviews of Proposals to Implement Enterprise SRS Initiatives unknown The Savannah River Site Strategic Plan for 2011 - 2015 describes 12 initiatives that Enterprise SRS will pursue by applying SRS's management core competencies in nuclear materials. Implementation of new missions resulting from this effort will likely require NEPA review. However, until firm proposals are developed

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Thermodynamics of quantum informational systems - Hamiltonian description  

E-Print Network (OSTI)

It is often claimed, that from a quantum system of d levels, and entropy S and heat bath of temperature T one can draw kT(ln d -S) amount of work. However, the usual arguments based on Szilard engine are not fully rigorous. Here we prove the formula within Hamiltonian description of drawing work from a quantum system and a heat bath, at a cost of entropy of the system. We base on the derivation of thermodynamical laws and quantities in [R. Alicki, J. Phys. A, 12, L103 (1979)] within a weak coupling limit. Our result provides fully physical scenario for extracting thermodynamical work from quantum correlations [J. Oppenheim et al. Phys. Rev. Lett. 89, 180402 (2002)]. We also derive Landauer principle as a consquence of second law within the considered model.

Robert Alicki; Michal Horodecki; Pawel Horodecki; Ryszard Horodecki

2004-02-02T23:59:59.000Z

322

SSL Selections Descriptions v6.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Zip Code Zip Code Project Description DOE Funding Total Project Value Cambrios Sunnyvale, CA 94085-4520 Solution-Processable Transparent Conductive Hole Injection Electrode for Organic Light-Emitting Diode (OLED) SSL. This project seeks to develop a cost-effective replacement for indium tin oxide for use as an electrode in OLED lighting devices. Indium is both rare and very expensive. $1,199,971 $1,846,110 University of Rochester Rochester, NY 14627-0216 Development and Utilization of Host Materials for White Phosphorescent OLEDs. This project seeks to produce white OLEDs with > 100 lm/W efficiency after light extraction enhancement and > 10,000 hour operating time, by making a new class of emissive materials. $1,239,071 $1,376,746 WhiteOptics, LLC

323

Geometric Complexity and Minimum Description Length Principle  

E-Print Network (OSTI)

The question of how one should decide among competing explanations of data is at the heart of the scientific enterprise. Quantitative methods of selecting among models have been advanced over the years without an underlying theoretical framework to guide the enterprise and evaluate new developments. In this paper, we show that differential geometry provides a unified understanding of the model selection problem. Foremost among its contributions is a reconceptualization of the problem as one of counting probability distributions. This reconceptualization naturally leads to development of a "geometric" complexity measure, which turns out to be equal to the Minimum Description Length (MDL) complexity measure Rissanen (1996) recently proposed. We demonstrate an application of the geometric complexity measure to model selection in cognitive psychology, with models of cognitive modeling in three different areas (psychophysics, information integration, categorization).

In Jae Myung; Shaobo Zhang; Mark A. Pitt

1999-01-01T23:59:59.000Z

324

Monitored Geologic Repository Project Description Document  

SciTech Connect

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2001-06-26T23:59:59.000Z

325

Definition: Operating Procedure | Open Energy Information  

Open Energy Info (EERE)

Procedure Procedure Jump to: navigation, search Dictionary.png Operating Procedure A document that identifies specific steps or tasks that should be taken by one or more specific operating positions to achieve specific operating goal(s). The steps in an Operating Procedure should be followed in the order in which they are presented, and should be performed by the position(s) identified. A document that lists the specific steps for a system operator to take in removing a specific transmission line from service is an example of an Operating Procedure.[1] Related Terms transmission lines, transmission line References ↑ Glossary of Terms Used in Reliability Standards An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from

326

Electric Markets Technical Assistance Program: FY1999 Grant Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FY1999 Grant FY1999 Grant Descriptions and Contact Information Electric Markets Technical Assistance Program: FY1999 Grant Descriptions and Contact Information Public Benefits and Distributed Generation Outreach Project The National Association of Regulatory Utility Commissioners (NARUC) will hold collaborative workshops with key stakeholders to build consensus on effective policy options for emerging competitive distributed generation markets. FY1999 Grant Descriptions and Contact Information More Documents & Publications Electric Restructuring Outreach Activities and Information Dissemination to State Public Utility Regulators Electric Markets Technical Assistance Program: FY2001 Grant Descriptions and Contact Information Electric Markets Technical Assistance Program: FY2003 Grant Descriptions

327

Solid Waste Program technical baseline description  

SciTech Connect

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Carlson, A.B.

1994-07-01T23:59:59.000Z

328

Decision Analysis for Enhanced Geothermal Systems Geothermal...  

Open Energy Info (EERE)

Recovery Act: Enhanced Geothermal Systems Component Research and DevelopmentAnalysis Project Type Topic 2 Geothermal Analysis Project Description The result of the proposed...

329

Procedures for Interagency Consultation to Avoid or Mitigate Adverse Effects on Rivers in the Nationwide Inventory  

Energy.gov (U.S. Department of Energy (DOE))

These Council on Environmental Quality (CEQ) procedures are designed to assist federal officials in complying with the President's directive to protect rivers in the Nationwide Inventory through the normal environmental analysis process.

330

FSME Procedure Approval Termination of Uranium Milling Licenses in Agreement  

E-Print Network (OSTI)

Any changes to the procedure will be the responsibility of the FSME Procedure Contact. Copies of the FSME procedures will be available through the NRC website. Procedure Title: Termination of Uranium Milling

Robert J. Lewis; A. Duncan White; William R. Rautzen

2010-01-01T23:59:59.000Z

331

Guidelines and procedures for design of Class 1 elevated temperature nuclear system components  

Science Conference Proceedings (OSTI)

This standard provides guidelines and procedures which may be used by the manufacturer in satisfying the requirements given for design of class 1 elevated temperature nuclear system components. Guidance is given regarding planning and control of design analysis. A sequence for calculations is recommended. Methods of analysis, including procedures to account for environmental effects, are given which are acceptable in principle to the owner. A format is provided for use in documentation of design analyses.

Not Available

1986-09-01T23:59:59.000Z

332

Workshop on Test Procedures for Materials for Hydrogen ...  

Science Conference Proceedings (OSTI)

Test Procedures for Hydrogen Pipelines. ... The NIST Workshop on Materials Test Procedures for Hydrogen Pipelines Proceedings is now available. ...

333

Policies and Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Communication & Engagement » EM SSAB » Policies and Services » Communication & Engagement » EM SSAB » Policies and Procedures Policies and Procedures The purpose of this document is to provide guidance regarding the operation of the Environmental Management Site-Specific Advisory Board (EM SSAB or Board). Policies and Procedures More Documents & Publications Memorandum: Regarding Delegation of Designated Federal Officials for Site Specific Advisory Boards EM SSAB Charter DOE Manual - ADVISORY COMMITTEE MANAGEMENT PROGRAM Waste Management Nuclear Materials & Waste Tank Waste and Waste Processing Waste Disposition Packaging and Transportation Site & Facility Restoration Deactivation & Decommissioning (D&D) Facility Engineering Soil & Groundwater Sustainability Program Management Safety

334

AHTR Refueling Systems and Process Description  

SciTech Connect

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

2012-07-01T23:59:59.000Z

335

AHTR Refueling Systems and Process Description  

SciTech Connect

The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

2012-07-15T23:59:59.000Z

336

ARM - Procedure for Submitting Science and Research Products to the Data  

NLE Websites -- All DOE Office Websites (Extended Search)

DocumentationProcedure for Submitting Science and Research DocumentationProcedure for Submitting Science and Research Products to the Data Archive Policies, Plans, Descriptions Data Documentation Home Data Sharing and Distribution Policy Data Management and Documentation Plan Data Product Registration and Submission Reading netCDF and HDF Data Files Time in ARM netCDF Data Files Data Archive Documentation ARM Archive's Catalog of Data Streams (Updated monthly) Access to Historical ARM Data More on Understanding and Finding ARM Data Data Quality Problem Reporting Procedure for Submitting Science and Research Products to the Data Archive The Principal Investigator (PI) establishes contact with an ARM Translator to describe the data product. The Translator collects enough information to describe the PI Product within the Translator group; thereby resulting in assignment of the

337

FIRETEC: A transport description of wildfire behavior  

DOE Green Energy (OSTI)

Wildfires are a threat to human life and property, yet they are an unavoidable part of nature and in some instances they are necessary for the natural maintenance and evolution of forests. Investigators have attempted to describe the behavior (speed, direction, modes of spread) of wildfires for over fifty years. Current models for numerical description are mainly algebraic and based on statistical or empirical ideas. The authors describe, in contrast, a transport model called FIRETEC, which is a self-determining fire behavior model. The use of transport formulations connects the propagation rates to the full conservation equations for energy, momentum, species concentrations, mass, and turbulence. In this text, highlights of the model formulation and results are described. The goal of the FIRETEC model is to describe average behavior of the gases and fuels. It represents the essence of the combination of many small-scale processes without resolving each process in complete detail. The FIRETEC model is implemented into a computer code that examines line-fire propagation in a vertical spatial cut parallel to the direction of advancement. With this code the authors are able to examine wind effects, slope effects, and the effects of nonhomogeneous fuel distribution.

Linn, R.R.; Harlow, F.H.

1997-12-01T23:59:59.000Z

338

Handicapped Parking Procedures (HQ) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Handicapped Parking Procedures (HQ) Handicapped Parking Procedures (HQ) Handicapped Parking Procedures (HQ) It is the policy of the Department of Energy (DOE) that its parking facility be operated in a manner responsive to the needs of the Department, and for the maximum benefit of its employees. Individuals with temporary or permanent mobility impairment who, because of their condition, have a need to request a handicapped parking permit for the Forrestal or Germantown facilities, should use the following procedures: Complete a Parking Application Complete the Permit Application form DOE F 1400.12. In instances when the Parking Management personnel can visually assess an applicant's mobility impairment (i.e. use of crutches, walker, etc.), a temporary parking permit may be granted. At the time of application, the

339

Antivirus Procedures, Cyber Security, Information Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

Anti-virus Software Trend OfficeScan for PCs & Trend Micro Security for Mac Anti-Virus procedures are an important component of BNL's host-based security architecture. Anti-Virus...

340

Using project procedure diagrams for milestone planning  

Science Conference Proceedings (OSTI)

This paper presents Project Procedure Diagrams (PPDs) as a technique for specifying and elaborating project milestone plans. The graphical syntax of PPDs is similar to UML activity diagrams. The operational semantics is based on token flow and resembles ...

Klaus Bergner; Jan Friedrich

2010-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

AOCS Standard Procedure Ck 2-09  

Science Conference Proceedings (OSTI)

Determination of Various Properties of Biodiesel by the QTA® System Method AOCS Standard Procedure Ck 2-09 Methods Methods and Analyses Analytical Chemistry Methods Downloads Methods Downloads AOCS ...

342

Revolutionizing standard operating procedures in biomanufacturing  

E-Print Network (OSTI)

In its quest to become a High Reliability Performance (HRP) organization, Amgen manufacturing operations desires to further improve its adherence to, and effectiveness of, its standard operating procedures (SOPs). SOPs are ...

Nag, Aditya

2013-01-01T23:59:59.000Z

343

Chapter 13 - Simplified Acquisition Procedures | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Card Policy and Operating Procedures 13.2PurchaseOrders0.pdf More Documents & Publications OPAM Policy Acquisition Guides Chapter 16 - Types of Contracts Policy Flash 2011-75...

344

Proposal Submittal and Scheduling Procedures for Macromolecular...  

NLE Websites -- All DOE Office Websites (Extended Search)

merit and to assure that all ES&H guidelines are met in accordance with standard SSRL policies and procedures. Sufficient generic information to enable Proposal Review Panel review...

345

BOOKS AND PROCEEDINGS POLICIES PROCEDURE FOR ...  

Science Conference Proceedings (OSTI)

Nov 18, 2008 ... PROCEDURE FOR ADDRESSING PLAGIARISM CLAIMS. TMS Content Development ... Editor Guidelines: It is the policy of TMS that each editor who is named and included on the cover/title page of the book is entitled to one ...

346

Strategies for Evaluating Quality Assurance Procedures  

Science Conference Proceedings (OSTI)

The evaluation strategies outlined in this paper constitute a set of tools beneficial to the development and documentation of robust automated quality assurance (QA) procedures. Traditionally, thresholds for the QA of climate data have been based ...

Imke Durre; Matthew J. Menne; Russell S. Vose

2008-06-01T23:59:59.000Z

347

Alternative Fuel Evaluation Program: Alternative Fuel Light Duty Vehicle Project - Data collection responsibilities, techniques, and test procedures  

DOE Green Energy (OSTI)

This report describes the data gathering and analysis procedures that support the US Department of Energy's implementation of the Alternative Motor Fuels Act (AMFA) of 1988. Specifically, test procedures, analytical methods, and data protocols are covered. The aim of these collection and analysis efforts, as mandated by AMFA, is to demonstrate the environmental, economic, and performance characteristics of alternative transportation fuels.

Not Available

1992-07-01T23:59:59.000Z

348

Alternative Fuel Evaluation Program: Alternative Fuel Light Duty Vehicle Project - Data collection responsibilities, techniques, and test procedures  

DOE Green Energy (OSTI)

This report describes the data gathering and analysis procedures that support the US Department of Energy`s implementation of the Alternative Motor Fuels Act (AMFA) of 1988. Specifically, test procedures, analytical methods, and data protocols are covered. The aim of these collection and analysis efforts, as mandated by AMFA, is to demonstrate the environmental, economic, and performance characteristics of alternative transportation fuels.

Not Available

1992-07-01T23:59:59.000Z

349

Glove Perforations During Interventional Radiological Procedures  

SciTech Connect

Intact surgical gloves are essential to avoid contact with blood and other body fluids. The objective of this study was to estimate the incidence of glove perforations during interventional radiological procedures. In this study, a total of 758 gloves used in 94 interventional radiological procedures were examined for perforations. Eleven perforations were encountered, only one of which was of occult type. No significant difference in the frequency of glove perforation was found between the categories with varying time duration.

Leena, R. V., E-mail: leenarv_76@yahoo.co.uk; Shyamkumar, N. K. [Christian Medial College, Department of Radiodiagnosis (India)

2010-04-15T23:59:59.000Z

350

An exchange functional that tests the robustness of the plasmon description of the van der Waals density functional  

E-Print Network (OSTI)

Is the plasmon description within the non-local correlation of the van der Waals density functional by Dion and coworkers (vdW-DF1) robust enough to describe all exchange-correlation components? To address this question, we design an exchange functional, termed LV-PW86r based on this plasmon description as well as recent analysis on exchange in the large $s$-regime. In the regime with reduced gradients $s=|\

Kristian Berland; Per Hyldgaard

2013-09-06T23:59:59.000Z

351

Building America Performance Analysis Procedures for Existing Homes  

Science Conference Proceedings (OSTI)

Because there are more than 101 million residential households in the United States today, it is not surprising that existing residential buildings represent an extremely large source of potential energy savings. Because thousands of these homes are renovated each year, Building America is investigating the best ways to make existing homes more energy-efficient, based on lessons learned from research in new homes. The Building America program is aiming for a 20%-30% reduction in energy use in existing homes by 2020. The strategy for the existing homes project of Building America is to establish technology pathways that reduce energy consumption cost-effectively in American homes. The existing buildings project focuses on finding ways to adapt the results from the new homes research to retrofit applications in existing homes. Research activities include a combination of computer modeling, field demonstrations, and long-term monitoring to support the development of integrated approaches to reduce energy use in existing residential buildings. Analytical tools are being developed to guide designers and builders in selecting the best approaches for each application. Also, DOE partners with the U.S. Environmental Protection Agency (EPA) to increase energy efficiency in existing homes through the Home Performance with ENERGY STAR program.

Hendron, R.

2006-05-01T23:59:59.000Z

352

Analysis Procedure And Equipment For Deep Geoelectrical Soundings...  

Open Energy Info (EERE)

times larger-by the proposed numerical techniques, so that a small portable electrical power source can be utilized in the field. Author(s): L. Alfano, E. Carrara, G....

353

Project: Seismic Analysis and Design Procedures in Existing ...  

Science Conference Proceedings (OSTI)

... stiffness irregularities on higher mode responses of low ... that resist wind loads by essentially elastic response. ... now part of the Disaster and Failure ...

2013-01-09T23:59:59.000Z

354

Microsoft Word - Tab 2d - Project Descriptions Press Format ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Descriptions Press Format - SAI TPPs - Final.doc More Documents & Publications Solar America Initiative Low Cost High Concentration PV Systems for Utility Power Generation...

355

Tank Monitoring and Control System (TMACS) Version Description Document (VDD)  

SciTech Connect

This document updates the Version Description Document with the changes incorporated in the Revision 11.2 software installation on the Tank Monitor and Control System (TMACS).

BARNES, D.A.

2000-03-02T23:59:59.000Z

356

graphicsQC-package Quality Control for Graphics Description Details  

E-Print Network (OSTI)

Description The package provides functions to generate graphics files, compare them with “model” files, and report the results. License GPL-2

Stephen Gardiner; Paul Murrell; Maintainer Paul Murrell; Stephen Gardiner

2009-01-01T23:59:59.000Z

357

Descriptions of Past Research: Generation Sector Nondestructive Evaluation  

Science Conference Proceedings (OSTI)

Descriptions of Past Research: Generation Sector Nondestructive Evaluation contains summaries of many past Electric Power Research Institute (EPRI) nondestructive evaluation (NDE) research and development (R&D) efforts.

2011-07-18T23:59:59.000Z

358

New Mexico Hydrogen Fuels Challenge Program Description The New...  

NLE Websites -- All DOE Office Websites (Extended Search)

New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels Challenge is an event that provides a hands-on opportunity for middle school students (grades...

359

Imputing human descriptions in semantic biometrics  

Science Conference Proceedings (OSTI)

Human identification at a distance has received significant interest due to the ever increasing surveillance infrastructure. Biometrics such as face and gait offer a suitable physical attribute to uniquely identify people from a distance. When linking ... Keywords: SVD, biometrics, imputation, latent semantic analysis, semantic biometrics, surveillance

Daniel A. Reid; Mark S. Nixon

2010-10-01T23:59:59.000Z

360

Export Authorizations - Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Export Authorizations - Procedures Export Authorizations - Procedures Export Authorizations - Procedures Part II, Section 202(e) of the Federal Power Act (FPA) states that exports of electric energy should be allowed unless the proposed export would impair the sufficiency of electric power supply within the U.S. or would impede or tend to impede the coordinated use of the U.S. power supply network. Based on these guidelines, DOE will grant authorization to export electric energy if it is determined that: 1.Sufficient generating resources exist such that the exporter could sustain the export while still maintaining adequate generating resources to meet all firm supply obligations; and, 2.The export would not cause operating parameters on regional transmission systems to fall outside of established industry criteria.

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Emergency Response & Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Security + Safety » Emergency Response & Procedures National Security + Safety » Emergency Response & Procedures Emergency Response & Procedures November 1, 2013 A Statement from U.S. Secretary of Energy Ernest Moniz Regarding Fukushima On Friday, I made my first visit to the Fukushima Daiichi Nuclear Power Station. It is stunning that one can see firsthand the destructive force of the tsunami even more than two and a half years after the tragic events October 29, 2013 Workers repair power lines in the Mid-Atlantic shortly after Hurricane Sandy. | Photo courtesy of the Energy Department. Hurricane Sandy One Year Later: Rebuilding Stronger, More Resilient Communities The Energy Department continues to take actions to protect our energy infrastructure, adapt to climate change and build partnerships to make

362

Remote procedure execution software for distributed systems  

SciTech Connect

Remote Procedure Execution facilitates the construction of distributed software systems, spanning computers of various types. Programmers who use the RPX package specify subroutine calls which are to be executed on a remote computer. RPX is used to generate code for dummy routines which transmit input parameters and receive output parameters, as well as a main program which receives procedure call requests, calls the requested procedure, and returns the result. The package automatically performs datatype conversions and uses an appropriate connection oriented protocol. Supported operating systems/processors are VMS(VAX), UNIX(MIPS R2000, R3000) and Software Components Group's pSOS (680x0). Connection oriented protocols are supported over Ethernet (TCP/IP) and RS232 (a package of our own design). 2 refs., 2 figs.

Petravick, D.L.; Berman, E.F.; Sergey, G.P.

1989-05-01T23:59:59.000Z

363

Public Comment Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Public Comment Procedures Public Comment Procedures Public Comment Procedures In response to an application, any person may file a protest, comments, or a motion to intervene or notice of intervention, as applicable. Any person wishing to become a party to the proceeding must file a motion to intervene or notice of intervention, as applicable. Dockets Open for Public Comment A list of current dockets open for public comment can be found on the main Natural Gas Regulations page here. FILINGS: Filings may be submitted using one of the following methods. Please be sure to include Docket No. and Application Name with your filing: E-mail: fergas@hq.doe.gov (you must include FE Docket No. in the Subject line of the email) Regular Mail: (should include an original and three paper copies of

364

Coordinate Measuring Machine Pit Artifact Inspection Procedure  

Science Conference Proceedings (OSTI)

The goal of this document is to outline a procedure for dimensional measurement of Los Alamos National Laboratory's CMM Pit Artifact. This procedure will be used by the Manufacturing Practice's Inspection Technology Subgroup of the Interagency Manufacturing Operations Group and Joint Operations Weapon Operations Group (IMOG/JOWOG 39) round robin participants. The intent is to assess the state of industry within the Nuclear Weapons Complex for measurements made on this type of part and find which current measurement strategies and techniques produce the best results.

Montano, Joshua D. [Los Alamos National Laboratory

2012-07-31T23:59:59.000Z

365

System Management Ontology Description Logic Formalization of CIM  

E-Print Network (OSTI)

SMO System Management Ontology Description Logic Formalization of CIM Andrea Cal`i, Diego Calvanese Information Model (CIM) has the goal of providing a suitable approach for modeling systems and networks using the object-oriented paradigm. In this document we illustrate how to map CIM onto an expressive Description

Calvanese, Diego

366

Characterization of imaging phone cameras using minimum description length principle  

Science Conference Proceedings (OSTI)

In this paper, a new Minimum Description Length (MDL) approach for the characterization of a mobile phone's color camera is presented. The use of high-order polynomials, Fourier sine series, and artificial neural networks (ANN) for solving this problem ... Keywords: artificial neural network, high-order polynomial, imaging mobile phone, minimum description length

Adrian Burian; Aki Happonen; Mihaela Cirlugea

2008-04-01T23:59:59.000Z

367

Description Logic in a nutshell Seminar ,,Resources for Computational Linguists"  

E-Print Network (OSTI)

person city location located_in.location ... 8 #12;Resources for Comp` Linguists 07 Description Logics - Michaela Regneri & Magdalena Wolska Description Logic - Terms · (atomic) concepts C denoting sets of individuals (person) unary predicates in FOL · (atomic) roles R: (loves) binary predicates in FOL · complex

Prasad, Sanjiva

368

Fuzzy description logics with general t-norms and datatypes  

Science Conference Proceedings (OSTI)

Fuzzy description logics (DLs) are a family of logics which allow the representation of (and the reasoning within) structured knowledge affected by vagueness. Although a relatively important amount of work has been carried out in the last years, current ... Keywords: Fuzzy description logics, Fuzzy logic, Fuzzy ontologies, Logic for the semantic web

Fernando Bobillo; Umberto Straccia

2009-12-01T23:59:59.000Z

369

PSpace Reasoning with the Description Logic ALCF(D)  

E-Print Network (OSTI)

PSpace Reasoning with the Description Logic ALCF(D) CARSTEN LUTZ, Institute for Theoretical and disagreements ALCF(D). We show that, for both logics, the standard reasoning tasks concept satis#12;ability Oxford University Press #12; 536 PSpace Reasoning with the Description Logic ALCF(D) #12;xed extension

Baader, Franz

370

NEXP TIME-complete description logics with concrete domains  

Science Conference Proceedings (OSTI)

Concrete domains are an extension of Description Logics (DLs) that allow one to integrate reasoning about conceptual knowledge with reasoning about "concrete qualities" of real-world entities such as their sizes, weights, and durations. In this article, ... Keywords: Computational complexity, NExpTime-completeness, concrete domains, description logic, domino problem, post correspondence problem

Carsten Lutz

2004-10-01T23:59:59.000Z

371

Description of interest regions with local binary patterns  

Science Conference Proceedings (OSTI)

This paper presents a novel method for interest region description. We adopted the idea that the appearance of an interest region can be well characterized by the distribution of its local features. The most well-known descriptor built on this idea is ... Keywords: Image matching, Local binary patterns, Object recognition, Region description, Region detection, SIFT

Marko Heikkilä; Matti Pietikäinen; Cordelia Schmid

2009-03-01T23:59:59.000Z

372

Efficient description logic reasoning in prolog: The dlog system  

Science Conference Proceedings (OSTI)

Traditional algorithms for description logic (DL) instance retrieval are inefficient for large amounts of underlying data. As DL is becoming more and more popular in areas such as the Semantic Web and information integration, it is very important to ... Keywords: description logic, large data sets, logic programming, open world, resolution

Gergely LukÁcsy; PÉter Szeredi

2009-05-01T23:59:59.000Z

373

OA-50 Technical Qualification Program Standard Procedure, October 2003  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SP-OA-50-TQP-1 SP-OA-50-TQP-1 Office of Oversight Revision 0 Standard Procedure Page 2 of 19 Office/Facility Specific Qualification Standards build upon the Functional Area Qualification Standards and a functional analysis of the participant's specific office mission requirements and activities. Successful completion of the TQP entails satisfying all competencies contained in the General Technical Base, assigned primary Functional Area and Office/Facility Specific Qualification Standards applicable to the participant's position. Participants should normally successfully complete all TQP requirements within 18 months from the date they entered the program. Upon successful completion of the TQP, Oversight members will start the requalification

374

Step Complexity Measure for Emergency Operating Procedures - Determining Weighting Factors  

Science Conference Proceedings (OSTI)

In complex systems, such as nuclear power plants (NPPs) or airplane control systems, human error has been regarded as the primary cause of many events. Therefore, to ensure system safety, extensive effort has been made to identify the significant factors that can cause human error. According to related studies, written manuals or operating procedures are revealed as one of the important factors, and the understandability is pointed out as one of the major reasons for procedure-related human errors.Many qualitative checklists have been suggested to evaluate emergency operating procedures (EOPs) of NPPs so as to minimize procedure-related human errors. However, since qualitative evaluations using checklists have some drawbacks, a quantitative measure that can quantify the complexity of EOPs is indispensable.From this necessity, Park et al. suggested the step complexity (SC) measure to quantify the complexity of procedural steps included in EOPs. To verify the appropriateness of the SC measure, averaged step performance time data obtained from emergency training records of the loss-of-coolant accident (LOCA) and the excess steam demand event were compared with estimated SC scores. However, although averaged step performance time data and estimated SC scores show meaningful correlation, some important issues such as determining proper weighting factors have to be clarified to ensure the appropriateness of the SC measure. These were not properly dealt with due to a lack of backup data.In this paper, to resolve one of the important issues, emergency training records are additionally collected and analyzed in order to determine proper weighting factors. The total number of collected records is 66, and the training scenarios cover five emergency conditions including the LOCA, the steam generator tube rupture, the loss of all feedwater, the loss of off-site power, and the station blackout. From these records, average step performance time data are retrieved, and new weighting factors are determined by using a nonlinear regression analysis. The results show that the SC scores quantified by the new weighting factors show statistically meaningful correlation with averaged step performance time data. Thus, it can be concluded that the SC measure can represent the complexity of procedural steps included in EOPs.

Park, Jinkyun; Jung, Wondea; Kim, Jaewhan; Ha, Jaejoo [Korea Atomic Energy Research Institute (Korea, Republic of)

2003-09-15T23:59:59.000Z

375

The insertion device magnetic measurement facility: Prototype and operational procedures  

SciTech Connect

This report is a description of the current status of the magnetic measurement facility and is a basic instructional manual for the operation of the facility and its components. Please refer to the appendices for more detailed information about specific components and procedures. The purpose of the magnetic measurement facility is to take accurate measurements of the magnetic field in the gay of the IDs in order to determine the effect of the ID on the stored particle beam and the emitted radiation. The facility will also play an important role when evaluating new ideas, novel devices, and inhouse prototypes as part of the ongoing research and development program at the APS. The measurements will be performed with both moving search coils and moving Hall probes. The IDs will be evaluated by computer modeling of the emitted radiation for any given (measured) magnetic field map. The quality of the magnetic field will be described in terms of integrated multipoles for the effect on Storage Ring performance and in terms of the derived trajectories for the emitted radiation. Before being installed on the Storage Ring, every device will be measured and characterized to assure that it is compatible with Storage Ring requirements and radiation specifications. The accuracy that the APS needs to achieve for magnetic measurements will be based on these specifications.

Burkel, L.; Dejus, R.; Maines, J.; O' Brien, J.; Vasserman, I. (Argonne National Lab., IL (United States). Advanced Photon Source Accelerator Systems Div.); Pfleuger, J. (Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Hamburger Synchrotronstrahlungslabor)

1993-03-01T23:59:59.000Z

376

GRIEVANCE PROCEDURES The State Employee Grievance Procedure Act provides that each agency and department of State government shall establish a  

E-Print Network (OSTI)

PROCEDURE GRIEVANCE PROCEDURES The State Employee Grievance Procedure Act provides that each agency and department of State government shall establish a written employee grievance procedure approved by the State Personnel Director. A copy of the approved procedure plan shall be furnished to the employees of the agency

Kunkle, Tom

377

Page 1 of 5 OUA CSP Procedures  

E-Print Network (OSTI)

Page 1 of 5 OUA CSP Procedures Author(s): Kayla Polak Date Issued: March 2013 Issuing Area: Flexible Learning Support Subject: OUA Commonwealth Supported Places (CSP) Circulation: University OUA CSP award courses. As the Flexible Learning Support office at Curtin University is the conduit

378

Chemical Spill Response Procedure Initial Response  

E-Print Network (OSTI)

Chemical Spill Response Procedure Initial Response 1. Advise lab occupants of the spill such as quantity spilled and chemical name. Risk Assessment 3. Conduct an initial risk assessment to determine if to the chemical spill. This link can be found at the bottom of the Campus Security homepage, http

379

A COMPUTATIONAL PROCEDURE TO ESTIMATE THE FUNDAMENTAL  

E-Print Network (OSTI)

of the grounding systems is to dissipate a current injection* * at an electrical substation produced A COMPUTATIONAL PROCEDURE TO ESTIMATE THE FUNDAMENTAL PARAMETERS IN GROUNDING. Abstract The grounding grid design must be made in such a way that the funda- mental parameters do

Bendito, Enrique

380

Fusion procedure for the Brauer algebra  

E-Print Network (OSTI)

We show that all primitive idempotents for the Brauer algebra B_n(w) can be found by evaluating a rational function in several variables which has the form of a product of R-matrix type factors. This provides an analogue of the fusion procedure for B_n(w).

A. P. Isaev; A. I. Molev

2008-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Security Procedures Caltech Campus Security Dispatch  

E-Print Network (OSTI)

Security Procedures Caltech Campus Security Dispatch: 5000 (from any Caltech phone) or (626) 395-5000 (from any phone) When emergencies arise, contact Caltech Campus Security MEDICAL If someone experiences a medical emergency: · Remain calm · Notify Campus Security Dispatch · Do NOT move victim EARTHQUAKE When

Goddard III, William A.

382

Procedures for Interagency Consultation to Avoid or Mitigate Adverse Effects on Rivers in the Nationwide Inventory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Procedures for Interagency Consultation to Avoid or Mitigate Adverse Effects Procedures for Interagency Consultation to Avoid or Mitigate Adverse Effects on Rivers in the Nationwide Inventory These procedures are designed to assist federal officials in complying with the President's directive (attached) to protect rivers in the Nationwide Inventory through the normal environmental analysis process. NEOA, E.O. 1 15 14, CEQ's NEPA Regulations, and agency implementing procedures should be used to meet the President's directive. Although the steps outlined below pertain to wild and scenic river protection, they also fit clearly within agencies' existing environmental analysis processes. Agencies are already required: to identify and analyze the environmental effects of their actions; to consult with agencies with jurisdiction by law or special expertise (in this case, the National Park Service (NPS)); to

383

Fundamental Statistical Descriptions of Plasma Turbulence in Magnetic Fields  

SciTech Connect

A pedagogical review of the historical development and current status (as of early 2000) of systematic statistical theories of plasma turbulence is undertaken. Emphasis is on conceptual foundations and methodology, not practical applications. Particular attention is paid to equations and formalism appropriate to strongly magnetized, fully ionized plasmas. Extensive reference to the literature on neutral-fluid turbulence is made, but the unique properties and problems of plasmas are emphasized throughout. Discussions are given of quasilinear theory, weak-turbulence theory, resonance-broadening theory, and the clump algorithm. Those are developed independently, then shown to be special cases of the direct-interaction approximation (DIA), which provides a central focus for the article. Various methods of renormalized perturbation theory are described, then unified with the aid of the generating-functional formalism of Martin, Siggia, and Rose. A general expression for the renormalized dielectric function is deduced and discussed in detail. Modern approaches such as decimation and PDF methods are described. Derivations of DIA-based Markovian closures are discussed. The eddy-damped quasinormal Markovian closure is shown to be nonrealizable in the presence of waves, and a new realizable Markovian closure is presented. The test-field model and a realizable modification thereof are also summarized. Numerical solutions of various closures for some plasma-physics paradigms are reviewed. The variational approach to bounds on transport is developed. Miscellaneous topics include Onsager symmetries for turbulence, the interpretation of entropy balances for both kinetic and fluid descriptions, self-organized criticality, statistical interactions between disparate scales, and the roles of both mean and random shear. Appendices are provided on Fourier transform conventions, dimensional and scaling analysis, the derivations of nonlinear gyrokinetic and gyrofluid equations, stochasticity criteria for quasilinear theory, formal aspects of resonance-broadening theory, Novikov's theorem, the treatment of weak inhomogeneity, the derivation of the Vlasov weak-turbulence wave kinetic equation from a fully renormalized description, some features of a code for solving the direct-interaction approximation and related Markovian closures, the details of the solution of the EDQNM closure for a solvable three-wave model, and the notation used in the article.

John A. Krommes

2001-02-16T23:59:59.000Z

384

Policy and Procedures for the Review of Federal Actions Impacting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Policy and Procedures for the Review of Federal Actions Impacting the Environment Policy and Procedures for the Review of Federal Actions Impacting the Environment This manual...

385

Building Technologies Office: ENERGY STAR Test Procedures and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Test Procedures and Verification to someone by E-mail Share Building Technologies Office: ENERGY STAR Test Procedures and Verification on Facebook Tweet about Building Technologies...

386

ICR-ICE Standard Operating Procedures (Update Sept 2013) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ICR-ICE Standard Operating Procedures (Update Sept 2013) ICR-ICE Standard Operating Procedures (Update Sept 2013) ICRICE SOPSep 2013Final.pdf More Documents & Publications...

387

PROCEDURE FOR PREPARING RECORDS INVENTORY AND DISPOSITION SCHEDULES...  

NLE Websites -- All DOE Office Websites (Extended Search)

PREPARING RECORDS INVENTORY AND DISPOSITION SCHEDULES (RIDS) PROCEDURE FOR PREPARING RECORDS INVENTORY AND DISPOSITION SCHEDULES (RIDS) This document lists the procedures for...

388

Meeting Concerning Potential Test Procedures and Energy Conservation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concerning Potential Test Procedures and Energy Conservation Standards for Set-Top Boxes and Network Equipment Meeting Concerning Potential Test Procedures and Energy Conservation...

389

PARS II Standard Operating Procedure (SOP) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standard Operating Procedure (SOP) PARS II Standard Operating Procedure (SOP) PARSIISOPVersion1.120110811.pdf More Documents & Publications External Independent Review (EIR)...

390

ICR-ICE Standard Operating Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ICR-ICE Standard Operating Procedures ICR-ICE Standard Operating Procedures ICE-ICR SOP.pdf More Documents & Publications External Independent Review (EIR) Standard Operating...

391

Forrestal Garage Parking Procedures, Revised August 12, 2010  

Energy.gov (U.S. Department of Energy (DOE))

Forrestal Garage Parking Procedures - The Forrestal Facility Parking Guide was created to define policies and procedures governing the assignment, use, and management of parking spaces controlled...

392

Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis Analysis of Short-Bunch Production with the APS Booster and a Bunch Compressor Michael Borland, AOD/OAG ∗ August 8, 2003 1 Abstract There is significant interest among x-ray scientists in short-pulse x-rays. The x-rays from the APS ring, although very bright, are produced by an electron bunch with an rms length of more than 30 ps. Typically, it is only a linear accelerator that can produce a very short bunch. An idea was brought to my attention by Glenn Decker that might allow us to produce a short bunch using the APS booster. This idea involves extracting the beam from the booster at 3 to 4 GeV, while it is still relatively short, then compressing it with a magnetic bunch compressor. In this note, we present a preliminary analysis of this idea, along with the related idea of using a nonequilibrium beam from the APS photoinjector. 2 Background We will begin with an examination of the ideal result

393

Nonrelativistic Description of Nucleon-Nucleus Scattering  

Science Conference Proceedings (OSTI)

Within the three-dimensional semiclassical approximation, an analytic expression is obtained for the amplitude of proton-nucleus scattering at intermediate energies of incident protons. The method for deriving this amplitude is based on the use of the high-energy approximation with distorted waves. In view of the short-range character of proton-nucleon interaction, the process of proton-nucleus scattering is represented as a series of single scattering events occurring on each individual nucleon. With the aid of the proposed mathematical formalism, a recursion relation is derived that makes it possible to express the nuclear form factor obtained within the distorted-wave method in terms of the sum of an infinite Born series. Parameters that characterize the distributions of protons and neutrons in the spherical nuclei {sup 40}Ca, {sup 48}Ca, {sup 90}Zr, and {sup 208}Pb and which include the width of the surface layer of nucleons and the root-mean-square radii of the proton-, neutron-, and nucleon-density distributions are determined from an analysis of the measured cross sections for the elastic scattering of 1-GeV protons, a modified Fermi function being employed for the nucleon-density distribution.

Mirabutalybov, M.M. [Azerbaijan State Petroleum Academy, pr. Azadlyg 20, Baku, 370010 (Azerbaijan)

2004-12-01T23:59:59.000Z

394

A heterogeneous graphics procedure for visualization of massively parallel solutions  

SciTech Connect

Scientific visualization is playing an increasingly important role in the analysis and interpretation of massively parallel CFD simulations due to the enormous volume of data that can be generated on these machines. In this paper we will describe the development of a visualization technique based on a parallel analogue to the Marching Cubes algorithm. The algorithm has been developed for Multiple-Instruction, Multiple-Data (MIMD) massively parallel computers and is designed to take advantage of the heterogeneous programming capabilities of the MIMD architecture. We examine several different configurations and conclude that for producing animations the best one, in terms of both frame generation time and disk usage, is to run the two applications heterogeneously and send the resulting geometry description directly to a workstation for rendering, thereby totally eliminating the use of files from the animation process.

1993-01-01T23:59:59.000Z

395

A heterogeneous graphics procedure for visualization of massively parallel solutions  

SciTech Connect

Scientific visualization is playing an increasingly important role in the analysis and interpretation of massively parallel CFD simulations due to the enormous volume of data that can be generated on these machines. In this paper we will describe the development of a visualization technique based on a parallel analogue to the Marching Cubes algorithm. The algorithm has been developed for Multiple-Instruction, Multiple-Data (MIMD) massively parallel computers and is designed to take advantage of the heterogeneous programming capabilities of the MIMD architecture. We examine several different configurations and conclude that for producing animations the best one, in terms of both frame generation time and disk usage, is to run the two applications heterogeneously and send the resulting geometry description directly to a workstation for rendering, thereby totally eliminating the use of files from the animation process.

1993-03-01T23:59:59.000Z

396

Proposal Submittal and Scheduling Procedures for Macromolecular  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Submittal and Scheduling Procedures for Macromolecular Proposal Submittal and Scheduling Procedures for Macromolecular Crystallography Beam time for macromolecular crystallography projects is obtained by submitting an SSRL Macromolecular Crystallography Proposal. This proposal is peer reviewed by the Structural Molecular Biology and Biophysics subpanel of the SSRL Proposal Review Panel (PRP) for scientific merit and rating and for criticality of synchrotron radiation use. Proposal Forms New Proposal Request Form (note: you must be a registered user to submit a proposal through our User Portal. Click on "Become a New User" link to register.) Extension Application for Macromolecular Crystallography Proposals Rapid Access Application Form Types of Proposals Proposals should be submitted under one of the following classifications.

397

Ray-tracing Procedural Displacement Shaders  

E-Print Network (OSTI)

Displacement maps and procedural displacement shaders are a widely used approach of specifying geometric detail and increasing the visual complexity of a scene. While it is relatively straightforward to handle displacement shaders in pipeline based rendering systems such as the Reyes-architecture, it is much harder to efficiently integrate displacement-mapped surfaces in ray-tracers. Many commercial ray-tracers tessellate the surface into a multitude of small triangles. This introduces a series of problems such as excessive memory consumption and possibly undetected surface detail. In this paper we describe a novel way of ray-tracing procedural displacement shaders directly, that is, without introducing intermediate geometry. Affine arithmetic is used to compute bounding boxes for the shader over any range in the parameter domain. The method is comparable to the direct ray-tracing of B'ezier surfaces and implicit surfaces using B'ezier clipping and interval methods, respectively. Keyw...

Wolfgang Heidrich; Hans-peter Seidel

1998-01-01T23:59:59.000Z

398

Sampling of Procedural Shaders Using Affine Arithmetic  

E-Print Network (OSTI)

Procedural shaders have become popular tools for describing surface reflectance functions and other material properties. In comparison to fixed resolution textures they have the advantage of being resolution independent and storage e#cient. While procedural shaders provide an interface for evaluating the shader at a single point in parameter space, it is not easily possible to obtain an average value of the shader together with accurate error bounds over a finite area. Yet the ability to compute such error bounds is crucial for several interesting applications, most notably hierarchical area sampling for global illumination computations using the finite element approach and for the generation of textures used in interactive computer graphics. Using a#ne arithmetic for evaluating the shader over a finite area yields a tight, conservative error interval for the shader function. Compilers can automatically generate code for utilizing a#ne arithmetic from within shaders implemented in a ...

Heidrich

1996-01-01T23:59:59.000Z

399

Procedure to Measure Indoor Lighting Energy Performance  

SciTech Connect

This document provides standard definitions of performance metrics and methods to determine them for the energy performance of building interior lighting systems. It can be used for existing buildings and for proposed buildings. The primary users for whom these documents are intended are building energy analysts and technicians who design, install, and operate data acquisition systems, and who analyze and report building energy performance data. Typical results from the use of this procedure are the monthly and annual energy used for lighting, energy savings from occupancy or daylighting controls, and the percent of the total building energy use that is used by the lighting system. The document is not specifically intended for retrofit applications. However, it does complement Measurement and Verification protocols that do not provide detailed performance metrics or measurement procedures.

Deru, M.; Blair, N.; Torcellini, P.

2005-10-01T23:59:59.000Z

400

John Bardeen Engineering Leadership Program | Application Procedure  

NLE Websites -- All DOE Office Websites (Extended Search)

Application Procedure Application Procedure Candidates must complete these steps and submit by the application deadline. The next application deadline will be February 2014. Complete the online resume profile on the Fermilab employment website here. Submit the following by email or hardcopy to the address listed in the contact information below. Academic/Professional resume or curriculum vitae Abstract of graduate degree thesis Academic transcript (may be a copy; if selected for interview, original will be required) Three (3) letters of reference either sent directly by the writers, or sealed envelopes from the writers and sent by the candidate Statement of research interest Contact information: Bardeen Engineering Leadership Program Fermilab M.S. 340, P.O. Box 500 Batavia, IL 60510 USA

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

The attractor mechanism as a distillation procedure  

E-Print Network (OSTI)

In a recent paper it has been shown that for double extremal static spherically symmetric BPS black hole solutions in the STU model the well-known process of moduli stabilization at the horizon can be recast in a form of a distillation procedure of a three-qubit entangled state of GHZ-type. By studying the full flow in moduli space in this paper we investigate this distillation procedure in more detail. We introduce a three-qubit state with amplitudes depending on the conserved charges the warp factor, and the moduli. We show that for the recently discovered non-BPS solutions it is possible to see how the distillation procedure unfolds itself as we approach the horizon. For the non-BPS seed solutions at the asymptotically Minkowski region we are starting with a three-qubit state having seven nonequal nonvanishing amplitudes and finally at the horizon we get a GHZ state with merely four nonvanishing ones with equal magnitudes. The magnitude of the surviving nonvanishing amplitudes is proportional to the macroscopic black hole entropy. A systematic study of such attractor states shows that their properties reflect the structure of the fake superpotential. We also demonstrate that when starting with the very special values for the moduli corresponding to flat directions the uniform structure at the horizon deteriorates due to errors generalizing the usual bit flips acting on the qubits of the attractor states.

Péter Lévay; Szilárd Szalay

2010-04-14T23:59:59.000Z

402

Attractor mechanism as a distillation procedure  

Science Conference Proceedings (OSTI)

In a recent paper it was shown that for double extremal static spherical symmetric BPS black hole solutions in the STU model the well-known process of moduli stabilization at the horizon can be recast in a form of a distillation procedure of a three-qubit entangled state of a Greenberger-Horne-Zeilinger type. By studying the full flow in moduli space in this paper we investigate this distillation procedure in more detail. We introduce a three-qubit state with amplitudes depending on the conserved charges, the warp factor, and the moduli. We show that for the recently discovered non-BPS solutions it is possible to see how the distillation procedure unfolds itself as we approach the horizon. For the non-BPS seed solutions at the asymptotically Minkowski region we are starting with a three-qubit state having seven nonequal nonvanishing amplitudes and finally at the horizon we get a Greenberger-Horne-Zeilinger state with merely four nonvanishing ones with equal magnitudes. The magnitude of the surviving nonvanishing amplitudes is proportional to the macroscopic black hole entropy. A systematic study of such attractor states shows that their properties reflect the structure of the fake superpotential. We also demonstrate that when starting with the very special values for the moduli corresponding to flat directions the uniform structure at the horizon deteriorates due to errors generalizing the usual bit flips acting on the qubits of the attractor states.

Levay, Peter; Szalay, Szilard [Department of Theoretical Physics, Institute of Physics, Budapest University of Technology and Economics, H-1521 Budapest (Hungary)

2010-07-15T23:59:59.000Z

403

Hanford Site existing irradiated fuel storage facilities description  

SciTech Connect

This document describes facilities at the Hanford Site which are currently storing spent nuclear fuels. The descriptions provide a basis for the no-action alternatives of ongoing and planned National Environmental Protection Act reviews.

Willis, W.L.

1995-01-11T23:59:59.000Z

404

A Numerical Study of Cirrus Clouds. Part I: Model Description  

Science Conference Proceedings (OSTI)

This article, the first of a two-part series, presents a detailed description of a two-dimensional numerical cloud model directed toward elucidating the physical processes governing the evolution of cirrus clouds. The two primary scientific ...

Hui-Chun Liu; Pao K. Wang; Robert E. Schlesinger

2003-04-01T23:59:59.000Z

405

Wellness Peer Program Volunteer Job Description Wellness Peer Programs  

E-Print Network (OSTI)

Wellness Peer Program Volunteer Job Description Wellness Peer Programs: Leave The Pack Behind & Wellness Centre, UTSC Mental Wellness ­ mental health awareness program focusing on mental health, coping on healthy relationships, sexually transmitted infections and birth control Health & Wellness Centre

Kronzucker, Herbert J.

406

Technical Qualification Program Description - Integrated Support Center, Chicago Office  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DEPART ENT of Office of DEPART ENT of Office of ENERGY I Science Integrated Support Center Chicago Office Technical Qualification Program Description ~~~~~~'?£H(.k:1/Zi.':"r'fl. ; ;!. / ; h tJ/ tl oxa nn e E. Purucker, M anager ~ Office of Science - Chicago Office Technical Qualification Program Description Revision 2, November 2010 CONCURRENCE The Office of Science-Chicago Office (SC-CH) is the sponsor for this Technical Qualification Program (TQP) Description. This is applicable to SC-CH, New Brunswick Laboratory (NBLL Ames Site Office (AMSO) and Argonne Site Office (ASO). These offices are in joint participation and endorsement of the SC-CH Technical Qualification Program process and have also provided concurrence below. The SC-CH Manager is the approval authority for this program description.

407

Microsoft Word - Tab 2d - Project Descriptions Press Format ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Total Cost DOE Cost Recipient Cost 3,200,000 29,600,000 14,800,000 14,800,000 * Project Description: The principal objective of the project is to transition Amonix's...

408

Description of BEFs Green Tag Product  

NLE Websites -- All DOE Office Websites (Extended Search)

Description of BEF's Green Tag Product 1 February 22, 2001 In a green tag sale, the power from the new renewable energy facility is not physically delivered to the customer, but...

409

Business Case Slide 26: High-Value: Semiconductors - Description...  

NLE Websites -- All DOE Office Websites (Extended Search)

(cont.) Previous Slide Next Slide Table of Contents High-Value: Semiconductors - Description (cont.) Measuring the photo-voltaic properties of a DUO2 diode at NREL Measuring the...

410

Nuggeteer: automatic nugget-based evaluation using descriptions and judgements  

Science Conference Proceedings (OSTI)

The TREC Definition and Relationship questions are evaluated on the basis of information nuggets that may be contained in system responses. Human evaluators provide informal descriptions of each nugget, and judgements (assignments of nuggets to responses) ...

Gregory Marton; Alexey Radul

2006-06-01T23:59:59.000Z

411

2010-12-1-DICE-Diagnostic-Service-Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Editor: Joe Metzger Status: DRAFT (v1.0) Date: 2010-12-1 1 General Service Description for DICE Network Diagnostic Services The DICE collaboration network diagnostic service will...

412

Extended caching, backjumping and merging for expressive description logics  

Science Conference Proceedings (OSTI)

With this contribution we push the boundary of some known optimisations such as caching to the very expressive Description Logic $\\mathcal{SROIQ}$. The developed method is based on a sophisticated dependency management and a precise unsatisfiability ...

Andreas Steigmiller; Thorsten Liebig; Birte Glimm

2012-06-01T23:59:59.000Z

413

NEXPTIME-Complete Description Logics with Concrete Domains  

Science Conference Proceedings (OSTI)

Concrete domains are an extension of Description Logics (DLs) allowing to integrate reasoning about conceptual knowledge with reasoning about "concrete properties" of objects such as sizes, weights, and durations. It is known that reasoning with ALC(D), ...

Carsten Lutz

2001-06-01T23:59:59.000Z

414

Modelling structured domains using description graphs and logic programming  

Science Conference Proceedings (OSTI)

Although OWL 2 is widely used to describe complex objects such as chemical molecules, it cannot represent ‘structural' features of chemical entities (e.g., having a ring). A combination of rules and description graphs (DGs) has been proposed ...

Despoina Magka; Boris Motik; Ian Horrocks

2012-05-01T23:59:59.000Z

415

Data complexity in the ?L family of description logics  

Science Conference Proceedings (OSTI)

We study the data complexity of instance checking and conjunctive query answering in the EL family of description logics, with a particular emphasis on the boundary of tractability. We identify a large number of intractable extensions of EL, but also ...

Adila Krisnadhi; Carsten Lutz

2007-10-01T23:59:59.000Z

416

Descriptions of Past Research: Boiler Life and Availability Improvement Program  

Science Conference Proceedings (OSTI)

Descriptions of Past Research: Boiler Life and Availability Improvement Program contains summaries of many past Electric Power Research Institute (EPRI) Boiler Life and Availability Improvement Program research and development (R&D) efforts.

2011-09-30T23:59:59.000Z

417

VEHICLE AND BATTERY DESCRIPTIONS AND SPECIFICATIONS Vehicle Details  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 VEHICLE AND BATTERY DESCRIPTIONS AND SPECIFICATIONS Vehicle Details Base Vehicle: 2011 Honda CR-Z VIN: JHMZF1C67BS004466 Electric Machine 1 : 10 kW (peak), permanent magnet...

418

VEHICLE AND BATTERY DESCRIPTIONS AND SPECIFICATIONS Vehicle Details  

NLE Websites -- All DOE Office Websites (Extended Search)

Page 1 VEHICLE AND BATTERY DESCRIPTIONS AND SPECIFICATIONS Vehicle Details Base Vehicle: 2011 Honda CR-Z VIN: JHMZF1C64BS002982 Electric Machine 1 : 10 kW (peak), permanent magnet...

419

Development of a body force description for compressor stability assessment  

E-Print Network (OSTI)

This thesis presents a methodology for a body force description of a compressor with particular application to compressor stability calculations. The methodology is based on extracting blade forces from an axisymmetric ...

Kiwada, George (George Ford)

2008-01-01T23:59:59.000Z

420

FACT SHEET: Clean Coal University Research Awards and Project Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FACT SHEET: Clean Coal University Research Awards and Project FACT SHEET: Clean Coal University Research Awards and Project Descriptions FACT SHEET: Clean Coal University Research Awards and Project Descriptions As part of President Obama's all-of-the-above approach to American energy, the Energy Department announced on June 6, 2012, that nine universities have won awards for research projects that will continue to support innovation and development of clean coal technologies. This fact sheet includes detailed project descriptions for each university-led research award. FACT SHEET_ Clean Coal University Project Descriptions_0.pdf More Documents & Publications University Coal Research Program 2013 Selections Report on Assessment of Environmentally--Assisted Fatigue for LWR Extended Service Conditions FAQS Reference Guide - Mechanical Systems

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Environment analysis via ?CFA  

Science Conference Proceedings (OSTI)

We describe a new program-analysis framework, based on CPS and procedure-string abstractions, that can handle critical analyses which the k-CFA framework cannot. We present the main theorems concerning correctness, show an application analysis, ... Keywords: CPS, continuations, delta-CFA, environment analysis, flow analysis, functional languages, inlining, lambda calculus, program analysis, super-beta

Matthew Might; Olin Shivers

2006-01-01T23:59:59.000Z

422

DESCRIPTION OF THE SOFTWARE AND INTEGRATING PLATFORM  

Science Conference Proceedings (OSTI)

The Cementitious Barriers Partnership (CBP) Project is a multi-disciplinary, multi-institutional collaboration supported by the United States Department of Energy (US DOE) Office of Waste Processing. The objective of the CBP project is to develop a set of tools to improve understanding and prediction of the long-term structural, hydraulic, and chemical performance of cementitious barriers used in nuclear applications. A multi-disciplinary partnership of federal, academic, private sector, and international expertise has been formed to accomplish the project objective. In addition to the US DOE, the CBP partners are the Savannah River National Laboratory (SRNL), Vanderbilt University (VU)/Consortium for Risk Evaluation with Stakeholder Participation (CRESP), Energy Research Center of the Netherlands (ECN), and SIMCO Technologies, Inc. The Nuclear Regulatory Commission (NRC) is providing support under a Memorandum of Understanding. The National Institute of Standards and Technology (NIST) is providing research under an Interagency Agreement. Neither the NRC nor NIST are signatories to the CRADA. The periods of cementitious performance being evaluated are >100 years for operating facilities and > 1000 years for waste management. The set of simulation tools and data developed under this project will be used to evaluate and predict the behavior of cementitious barriers used in near surface engineered waste disposal systems, e.g., waste forms, containment structures, entombments, and environmental remediation, including decontamination and decommissioning analysis of structural concrete components of nuclear facilities (spent-fuel pools, dry spent-fuel storage units, and recycling facilities such as fuel fabrication, separations processes). Simulation parameters will be obtained from prior literature and will be experimentally measured under this project, as necessary, to demonstrate application of the simulation tools for three prototype applications (waste form in concrete vault, high-level waste tank grouting, and spent-fuel pool). Test methods and data needs to support use of the simulation tools for future applications will be defined. The CBP project is a five-year effort focused on reducing the uncertainties of current methodologies for assessing cementitious barrier performance and increasing the consistency and transparency of the assessment process. The results of this project will enable improved risk-informed, performance-based decision-making and support several of the strategic initiatives in the DOE Office of Environmental Management Engineering & Technology Roadmap. Those strategic initiatives include (1) enhanced tank closure processes; (2) enhanced stabilization technologies; (3) advanced predictive capabilities; (4) enhanced remediation methods; (5) adapted technologies for site-specific and complex-wide D&D applications; (6) improved SNF storage, stabilization and disposal preparation; (7) enhanced storage, monitoring and stabilization systems; and (8) enhanced long-term performance evaluation and monitoring.

Flach, G.

2009-12-31T23:59:59.000Z

423

Hard Spring Wheat Variety Descriptions Resistance To2  

E-Print Network (OSTI)

1 Hard Spring Wheat Variety Descriptions Resistance To2 Quality Factors Straw Stem Leaf Foliar Head; S =susceptible; VS =very susceptible; NA = data not available. #12;2 Hard White Spring Wheat Descriptions HWS 36.6 35.7 58.4 15.0 14.7 Kanata HWS 35.5 35.5 60.0 15.9 15.6 LSD 5% -- 3.2 -- 1.4 0.8 -- HWS-Hard

Dyer, Bill

424

Plutonium Immobilization Project System Design Description for Can Loading System  

Science Conference Proceedings (OSTI)

The purpose of this System Design Description (SDD) is to specify the system and component functions and requirements for the Can Loading System and provide a complete description of the system (design features, boundaries, and interfaces), principles of operation (including upsets and recovery), and the system maintenance approach. The Plutonium Immobilization Project (PIP) will immobilize up to 13 metric tons (MT) of U.S. surplus weapons usable plutonium materials.

Kriikku, E.

2001-02-15T23:59:59.000Z

425

Call Forwarding: New NIST Procedure Could Speed Cell ...  

Science Conference Proceedings (OSTI)

Call Forwarding: New NIST Procedure Could Speed Cell Phone Testing. For Immediate Release: March 2, 2010. ...

2010-10-05T23:59:59.000Z

426

702AZ aging waste ventilation facility year 2000 test procedure  

SciTech Connect

This test procedure was developed to determine if the 702AZ Tank Ventilation Facility system is Year 2000 Compliant. The procedure provides detailed instructions for performing the operations necessary and documenting the results. This verification procedure will document that the 702AZ Facility Systems are year 2000 compliant and will correctly meet the criteria established in this procedure.

Winkelman, W.D.

1998-07-22T23:59:59.000Z

427

Lessons learned from occurrences involving procedures at Los Alamos National Laboratory in 1994  

Science Conference Proceedings (OSTI)

This study used the Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS) data to investigate occurrences reported during one year at Los Alamos National Laboratory (LANL). ORPS provides a centralized database and computerized support for the Collection, distribution, updating, analysis, and validation of information in occurrence reports about abnormal events related to facility operation. Human factors causes for occurrences are not always defined in ORPS. Content analysis of narrative data revealed that 33% of all LANL 1994 adverse operational events have human factors causes related to procedures. Procedure-caused occurrences that resulted in injury to workers, damage to facilities or equipment, or a near-miss are analyzed.

Frostenson, C.K.

1995-07-01T23:59:59.000Z

428

System Description for Tank 241-AZ-101 Waste Retrieval Data Acquisition System  

SciTech Connect

The proposed activity provides the description of the Data Acquisition System for Tank 241-AZ-101. This description is documented in HNF-5572, Tank 241-AZ-101 Waste Retrieval Data Acquisition System (DAS). This activity supports the planned mixer pump tests for Tank 241-AZ-101. Tank 241-AZ-101 has been selected for the first full-scale demonstration of a mixer pump system. The tank currently holds over 960,000 gallons of neutralized current acid waste, including approximately 12.7 inches of settling solids (sludge) at the bottom of the tank. As described in Addendum 4 of the FSAR (LMHC 2000a), two 300 HP mixer pumps with associated measurement and monitoring equipment have been installed in Tank 241-AZ-101. The purpose of the Tank 241-AZ-101 retrieval system Data Acquisition System (DAS) is to provide monitoring and data acquisition of key parameters in order to confirm the effectiveness of the mixer pumps utilized for suspending solids in the tank. The suspension of solids in Tank 241-AZ-101 is necessary for pretreatment of the neutralized current acid waste and eventual disposal as glass via the Hanford Waste Vitrification Plant. HNF-5572 provides a basic description of the Tank 241-AZ-101 retrieval system DAS, including the field instrumentation and application software. The DAS is provided to fulfill requirements for data collection and monitoring. This document is not an operations procedure or is it intended to describe the mixing operation. This USQ screening provides evaluation of HNF-5572 (Revision 1) including the changes as documented on ECN 654001. The changes include (1) add information on historical trending and data backup, (2) modify DAS I/O list in Appendix E to reflect actual conditions in the field, and (3) delete IP address in Appendix F per Lockheed Martin Services, Inc. request.

ROMERO, S.G.

2000-02-14T23:59:59.000Z

429

Microsoft Word - Records Management Exit Procedures  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Records Management Records Management Exit Procedures For Departing Department of Energy Federal and Contractor Employees Records Management Division Office of IT Planning, Architecture, and E-Government Office of the Chief Information Officer July 2010 2 PRESERVATION OF FEDERAL RECORDS The Federal Records Act requires the Department of Energy (DOE) Records Officer to remind departing Federal and contractor employees that Federal records may not be removed from Government custody nor may they be destroyed except in accordance with a records disposition schedule that has been approved by the Archivist of the United States. The creation of adequate documentation and the preservation of Federal records are required by law and regulation

430

Procedure for determining the distribution ranking index  

SciTech Connect

The Distribution Ranking Index (DRI) has been developed as a simple but effective means to indicate the inherent, acute hazards of a material that might be released in a transportation accident. Utilizing existing Dow resources and procedures, it is one of the methods used for prioritization of chemicals in Dow`s distribution related process risk management effort. Seven individual hazard indexes are considered for a material. The values range from 1 to 4 with 4 representing the most severe hazard. The highest value from any hazard index determines the overall DRI. 3 refs., 1 fig., 8 tabs.

Latino, M.A. [Dow Chemical Co., Freeport, TX (United States)

1996-12-31T23:59:59.000Z

431

A procedure for oscillatory parameter identification  

SciTech Connect

A procedure is proposed where a power system is excited with a low-level pseduo-random probing signal and the frequency, damping, magnitude, and shape of oscillatory modes are identified using spectral density estimation and frequency-domain transfer-function identification. Attention is focussed on identifying system modes in the presence of noise. Two examples cases are studied: identification of electromechanical oscillation modes in a 16-machine power system; and turbine-generator shaft modes of a 3-machine power plant feeding a series-compensated 500-kV network.

Trudnowski, D.J.; Donnelly, M.K. [Pacific Northwest Lab., Richland, WA (United States); Hauer, J.F. [Bonneville Power Administration, Portland, OR (United States)

1994-02-01T23:59:59.000Z

432

A procedure of oscillatory parameter identification  

Science Conference Proceedings (OSTI)

A procedure is proposed where a power system is excited with a low-level pseudorandom probing signal and the frequency, damping, magnitude, and shape of oscillatory modes are identified using spectral density estimation and frequency-domain transfer-function identification. Attention is focused on identifying system modes in the presence of noise. Two example cases are studied: identification of electromechanical oscillation modes in a 16-machine power system; and turbine-generator shaft modes of a 3-machine power plant feeding a series-compensated 500-kV network.

Trudnowski, D.J.; Donnelly, M.K. (Pacific Northwest Lab., Richland, WA (United States)); Hauer, J.F. (Bonneville Power Administration, Portland, OR (United States))

1994-11-01T23:59:59.000Z

433

AGEING PROCEDURES ON LITHIUM BATTERIES IN AN INTERNATIONAL COLLABORATION CONTEXT  

DOE Green Energy (OSTI)

The widespread introduction of electrically-propelled vehicles is currently part of many political strategies and introduction plans. These new vehicles, ranging from limited (mild) hybrid to plug-in hybrid to fully-battery powered, will rely on a new class of advanced storage batteries, such as those based on lithium, to meet different technical and economical targets. The testing of these batteries to determine the performance and life in the various applications is a time-consuming and costly process that is not yet well developed. There are many examples of parallel testing activities that are poorly coordinated, for example, those in Europe, Japan and the US. These costs and efforts may be better leveraged through international collaboration, such as that possible within the framework of the International Energy Agency. Here, a new effort is under development that will establish standardized, accelerated testing procedures and will allow battery testing organizations to cooperate in the analysis of the resulting data. This paper reviews the present state-of-the-art in accelerated life testing in Europe, Japan and the US. The existing test procedures will be collected, compared and analyzed with the goal of international collaboration.

Jeffrey R. Belt; Ira Bloom; Mario Conte; Fiorentino Valerio Conte; Kenji Morita; Tomohiko Ikeya; Jens Groot

2010-11-01T23:59:59.000Z

434

Habitat Evaluation Procedures Report; Graves Property - Yakama Nation.  

DOE Green Energy (OSTI)

A habitat evaluation procedures (HEP) analysis was conducted on the Graves property (140 acres) in June 2007 to determine the number of habitat units to credit Bonneville Power Administration (BPA) for providing funds to acquire the property as partial mitigation for habitat losses associated with construction of McNary Dam. HEP surveys also documented the general ecological condition of the property. The Graves property was significantly damaged from past/present livestock grazing practices. Baseline HEP surveys generated 284.28 habitat units (HUs) or 2.03 HUs per acre. Of these, 275.50 HUs were associated with the shrubsteppe/grassland cover type while 8.78 HUs were tied to the riparian shrub cover type.

Ashley, Paul; Muse, Anthony

2008-02-01T23:59:59.000Z

435

Habitat Evaluation Procedures Report; Carl Property - Yakama Nation.  

DOE Green Energy (OSTI)

A baseline habitat evaluation procedures (HEP) analysis was conducted on the Carl property (160 acres) in June 2007 to determine the number of habitat units to credit Bonneville Power Administration (BPA) for providing funds to acquire the property as partial mitigation for habitat losses associated with construction of McNary Dam. HEP surveys also helped assess the general ecological condition of the property. The Carl property appeared damaged from livestock grazing and exhibited a high percentage of invasive forbs. Exotic grasses, while present, did not comprise a large percentage of the available cover in most areas. Cover types were primarily grassland/shrubsteppe with a limited emergent vegetation component. Baseline HEP surveys generated 356.11 HUs or 2.2 HUs per acre. Habitat units were associated with the following HEP models: California quail (47.69 HUs), western meadowlark (114.78 HUs), mallard (131.93 HUs), Canada goose (60.34 HUs), and mink (1.38 HUs).

Ashley, Paul; Muse, Anthony

2008-02-01T23:59:59.000Z

436

Microsoft Word - Proposal Form Description and Guidelines-rev.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Description and Form Description and Guidelines Please read the Proposal Form Description and Guidelines entirely before submitting a CNM Proposal You must register online through the User Facility Registration System BEFORE submitting a CNM Proposal. All individuals coming to Argonne must register, receive a badge number, and receive access permission for arrival. You will receive a badge number by e-mail. To log on to the Online User Proposal System for the first time, enter your badge number and also use your badge number for your initial password. Once you are logged in, the system will ask you to change your password. The CNM proposal has seven sections, each accessed by a tab on the online form. Note: All proposals MUST be submitted through the web-based system.

437

Property:Distributed Generation/Site Description | Open Energy Information  

Open Energy Info (EERE)

Generation/Site Description Generation/Site Description Jump to: navigation, search This is a property of type String. The allowed values for this property are: Agricultural Commercial-Hotel Commercial-Ice Arena Commercial-High Rise Office Commercial-Low Rise Office Commercial-Refrigerated Warehouse Commercial-Restaurant Commercial-Retail Store Commercial-Supermarket Commercial-Theater Commercial-Other Institutional-Hospital/Health Care Institutional-Nursing Home Institutional-School/University Institutional-Other Residential-Multifamily-Single Building Residential-Multifamily-Multibuilding Residential-Single Family Industrial-Food Processing Industrial-Plastics Processing Industrial-Wood Products Industrial-Other Testing Laboratory Water Utility Other Utility Other Pages using the property "Distributed Generation/Site Description"

438

Waste receiving and processing plant control system; system design description  

Science Conference Proceedings (OSTI)

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

LANE, M.P.

1999-02-24T23:59:59.000Z

439

TDE Ecosystem Model Intercomparison Data Archive: Model Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Model Descriptions Model Descriptions BGC++ BIOME-BGC CANOAK EALCO ecosys INTRASTAND LaRS LINKAGES v2.1 LoTEC MAESTRA NuCM PnET II SPA Literature Cited A total of 13 models were used in this study covering a range of temporal scales, spatial complexity, and mechanistic detail (Figure 1). Eight of the models (8) used an hourly time step, four models used a daily time step, and only one model used a monthly time step (i.e., PnET-II). Most models provided estimates for both stand carbon and water budgets, but other were limited to either the carbon (MAESTRA) or water (LINKAGES and NuCM) budgets. The most mechanistically complex models (ecosys, CLASS, LaRS, and CANOAK) also used a complete energy balance. A brief description of each of the models is provided below. BGC++ The BGC++ model (Hunt et al. 1999) simulates carbon, nitrogen, and

440

SVM-SVDD: a new method to solve data description problem with negative examples  

Science Conference Proceedings (OSTI)

Support Vector Data Description(SVDD) is an important method to solve data description or one-class classification problem. In original data description problem, only positive examples are provided in training. The performance of SVDD can be improved ...

Zhigang Wang, Zeng-Shun Zhao, Changshui Zhang

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE  

Office of Legacy Management (LM)

ACTION DESCRIPTION MEMORANDUM ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE UNIVERSITY OF CHICAGO CONTAMINATED AS A RESULT OF PREVIOUS MED/AEC ACTIVITIES Prepared by Environmental Research Division Argonne National Laboratory Argonne, Illinois December 1983 Prepared for U.S. Department of Energy Oak Ridge Operations Technical Services Division Oak Ridge, Tennessee II-39 CONTENTS Page Summary of Proposed Action ....................... 1 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. 1 Background and Need for Action ..................... 2 Proposed Remedial Action ........................ 3 Potential Issues ................... ......... 4 Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. 6 Tables. ............ .................. 7 References ................... ............ 8

442

A Meta-Model for Textual Use Case Description  

E-Print Network (OSTI)

A Use Case is a specification of interactions involving a system and external actors of that system. The capability for use case modeling has been integrated to the Unified Modeling Language (UML) since its inception. However, use cases are only defined at an abstract level, as the UML Specification does not discuss use case description in text form. In this paper, we propose an abstract syntax for textual use case description as a meta-model extension of the UML Specification. This meta-model is based on elements commonly found in use case templates. The meta-model also includes OCL constraints for ensuring consistency with the UML specification.

Stéphane S. Somé

2008-01-01T23:59:59.000Z

443

Laser Controlled Area Standard Operating Procedure (SOP)  

NLE Websites -- All DOE Office Websites (Extended Search)

72 72 2 Effective: Page 1 of 16 3/6/13 Subject: X26C Laser Safety Program Documentation The only official copy of this file is the one on-line in the Photon Sciences website. Before using a printed copy, verify that it is the most current version by checking the document issue date on the Photon Sciences website. 2.1/2g03e011.doc 1 (06/2009) BROOKHAVEN NATIONAL LABORATORY LASER CONTROLLED AREA STANDARD OPERATING PROCEDURE (SOP) This document defines the safety management program for the laser system(s) listed below. All American National Standard Institute (ANSI) Hazard Class 3B and 4 laser systems must be documented, reviewed, and approved through use of this form. Each system must be reviewed annually. Modify the template for this document to fit your particular circumstance.

444

Radiation Safety Policy and Procedures Committee  

NLE Websites -- All DOE Office Websites (Extended Search)

RSPPC Meeting Minutes APS only RSPPC Meeting Minutes APS only Radiation Safety Policy and Procedures Committee Charter 1. Purpose The committee reviews functional changes to the Access Control Interlock System (ACIS) and Personnel Protection System (PSS) used to provide personnel protection and area exclusion related to APS accelerators, storage ring and other radiation handling areas. The RSPP Committee advises APS management on radiation safety matters. At the request of APS Management the committee reviews projects, recommends radiation safety policy, and evaluates accident investigation conclusions. 2. Membership Members are appointed by the APS Division Directors and APS Director for their knowledge and background in Interlock Systems, Radiation Safety, Accelerator Operations and Work on the Experiment Floor.

445

Patent Protection and Licensing Procedure | BNL Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

BNL Inventors BNL Inventors Patent Protection and Licensing Procedure TCP Staff Assignment - Invention Disclosures received by Intellectual Property Legal Group (IPLG) will be given a BNL number, and assigned to a specific TCP staff member for commercial assessment. Henceforth, the assigned staff member will be responsible for all commercialization actions relating to the docket. Assessment - The TCP staff member assigned to the docket will meet with the inventor(s). Together they will discuss the invention and make a preliminary evaluation of potential applications and possible markets. Based on commercial assessment and a preliminary novelty determination, the TCP staff will make a recommendation to the IPLG whether to patent the invention. The TCP's decision and relevant documents will be circulated

446

PARS II Standard Operating Procedure Business Rules  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 25, 2011 June 25, 2011 U.S. Department of Energy The PARS II Standard Operating Procedure is a "living document" and will be updated on an ongoing basis. Comments or suggestions are welcome and should be forwarded to the PARS II administrator at PARSIIsupportoecm@hq.doe.gov. Notes Comment Pages Comment Pages Index Screenshot Pages Introduction I-1 Generic Business Rules I-2 Select Project I-3 - I-5 Enter/Modify Project Information I-6 - I-15 Enter/Modify Contact Information I-16 - I-21 Creating a Project I-22 Enter CD0 Information I-23 - I-26 Enter CD1 Information I-27 - I-29 Enter CD2 Information I-30 - I-33 Enter CD3A Information I-34 - I-36 Enter CD3 Information I-37 - I-39 Enter CD4 Information I-40 - I-42 Enter Closeout Information I-43 - I-45 Enter BCP Information I-46 - I-50 Screenshot

447

International Energy Agency design tool evaluation procedure  

Science Conference Proceedings (OSTI)

Detailed state-of-the-art building energy simulation models from nations participating in International Energy Agency (IEA) Task VIII are used to develop a quantitative procedure to evaluate more simplified design tools. Simulations are performed with the detailed models on a series of cases that progress systematically from the extremely simple to the relatively realistic. Output values for the cases, such as annual loads, annual maximum and minimum temperatures, and peak loads, are used to set target ranges with which the results from more simplified design tools can be compared. The more realistic cases, although geometrically simple, test the ability of the design tools to model such combined effects as thermal mass, direct gain windows, overhangs, internally generated heat, and dead-band and set-back thermostat control strategies. 5 refs., 9 figs., 4 tabs.

Judkoff, R.; Barakat, S.; Bloomfield, D.; Poel, B.; Stricker, R.; van Haaster, P.; Wortman, D.

1988-07-01T23:59:59.000Z

448

Biomonitoring test procedures and biological criteria  

SciTech Connect

The Water Environment Federation recently issued a special publication, Biomonitoring in the Water Environment. In this paper, the authors highlight the contents of the chapter 3, Biomonitoring Test Procedures, identify current trends in test procedures and introduce the concept of biological criteria (biocriteria). The book chapter (and this paper) focuses on freshwater and marine chronic and acute toxicity tests used in the National Pollutant Discharge Elimination System (NPDES) permits program to identify effluents and receiving waters containing toxic materials in acutely or chronically toxic concentrations. The two major categories of toxicity tests include acute tests and chronic tests. The USEPA chronic tests required in NPDEs permits have been shortened to 7 days by focusing on the most sensitive life-cycle stages; these tests are often referred to as short-term chronic tests. The type of test(s) required depend on NPDES permit requirements, objectives of the test, available resources, requirements of the test organisms, and effluent characteristics such as variability in flow or toxicity. The permit writer will determine the requirements for toxicity test(s) by considering such factors as dilution, effluent variability, and exposure variability. Whether the required test is acute or chronic, the objective of the test is to estimate the safe or no effect concentration which is defined as the concentration which will permit normal propagation of fish and other aquatic life in the receiving waters. In this paper, the authors review the types of toxicity tests, the commonly used test organisms, and the uses of toxicity test data. In addition, they briefly describe research on new methods and the use of biological criteria.

Kszos, L.A. [Oak Ridge National Lab., TN (United States); Lipschultz, M.J. [City of Las Vegas, NV (United States); Foster, W.E. [Saint Mary`s Coll., Winona, MN (United States)

1997-10-01T23:59:59.000Z

449

A correlation between soil descriptions and {sup 226}Ra concentrations in Florida soils  

Science Conference Proceedings (OSTI)

The soil radium content in Florida is highly variable. The range in radium concentrations, where the samples involved in this study are concerned, is from 0.1 pCi/g to 18.5 pCi/g. Low {sup 226}Ra concentrations (0.1 to 5 pCi/g) are evidenced in sands, moderate concentrations (5 to 11 pCi/g) are found in silt and gravel, and high {sup 226}Ra concentrations (>11 pCi/g) are found in soil horizons with shell, clay, and strata with phosphate. Strata containing phosphate yields a high concentration of {sup 226}Ra. The information obtained in this study, soil descriptions with their corresponding {sup 226}Ra concentrations, comes from geological cores drilled by geotechnical consultants with gamma spectrometry analysis performed by high resolution gamma spectroscopy. Concentration; of {sup 226}Ra generally increase with depth. These cores are usually terminated at 20 feet deep, with some cores being shallower than this due to hitting bedrock or encountering the water table. These frequency distributions give the core-logging geologist an approximate concentration of {sup 226}Ra based on the description of the soil. Since the correlation of {sup 226}Ra and soil descriptions can be used as a tool in assigning indoor radon potential, this study is of importance to land managers, contractors, developers, and regulating agencies who are attempting to place standards on tracts of land with {sup 226}Ra concentration used as a criterion.

Harrison, D.P.

1992-12-31T23:59:59.000Z

450

The procedures manual of the Environmental Measurements Laboratory. Volume 2, 28. edition  

SciTech Connect

This report contains environmental sampling and analytical chemistry procedures that are performed by the Environmental Measurements Laboratory. The purpose of environmental sampling and analysis is to obtain data that describe a particular site at a specific point in time from which an evaluation can be made as a basis for possible action.

Chieco, N.A. [ed.

1997-02-01T23:59:59.000Z

451

A MathCAD procedure for commercial pipeline hydraulic design considering local energy losses  

Science Conference Proceedings (OSTI)

Using a power type equation for friction factor, this paper presents a design procedure which provides accurate solutions for three types of pipe design problems (Types A-C) taking into consideration the effect of local losses. The parameters introduced ... Keywords: Commercial pipes, MathCAD, Pipe hydraulics, Pipeline design, Pressurized flows, Software, Steady-state analysis, Water distribution networks

Gürol Y?ld?r?m; Vijay P. Singh

2010-03-01T23:59:59.000Z

452

SACRD: a data base for fast reactor safety computer codes, operational procedures  

SciTech Connect

SACRD (Safety Analysis Computerized Reactor Data) is a data base of nondesign-related information used in computer codes for fast reactor safety analyses. This document reports the procedures used in SACRD to help assure a reasonable level of integrity of the material contained in the data base. It also serves to document much of the computer software used with the data base.

Forsberg, V.M.; Arwood, J.W.; Greene, N.M.; Raiford, G.B.

1980-09-01T23:59:59.000Z

453

Hybrid LP/SDP Bounding Procedure  

E-Print Network (OSTI)

and little computational analysis is presented. For this reason and ..... run on a PC with a Intel(R) Xeon(R) E5-2670 at 2.6 GHz and 64 GB RAM memory, under ...

454

Procedural Utility: An Economics Beyond Outcomes  

E-Print Network (OSTI)

variable in the empirical analysis, job satisfaction is usedjob satisfaction values are computed from the final samples as used in the empirical analysisanalyses have shown that being self-employed (and working in smaller hierarchies) raises job

Benz, Matthias

2004-01-01T23:59:59.000Z

455

Test Procedure Development and Revision | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Test Procedure Development and Revision Test Procedure Development and Revision Test Procedure Development and Revision Most energy conservation standards rulemakings are accompanied by a concurrent test procedure rulemaking. Test procedures detail the protocols that manufacturers must follow when testing their products for compliance with Department of Energy (DOE) standards. DOE also uses the test procedures to determine compliance with the applicable standards in any verification or enforcement testing. The procedures specify how to measure and calculate the energy efficiency and/or energy use of each appliance. Test procedures also specify how to calculate an estimate of an appliance's annual operating cost, which is used on the EnergyGuide label as required by the Federal Trade Commission.

456

Alternative Fuels Data Center: Fuel Economy Test Procedures and Labeling  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Fuel Economy Test Fuel Economy Test Procedures and Labeling to someone by E-mail Share Alternative Fuels Data Center: Fuel Economy Test Procedures and Labeling on Facebook Tweet about Alternative Fuels Data Center: Fuel Economy Test Procedures and Labeling on Twitter Bookmark Alternative Fuels Data Center: Fuel Economy Test Procedures and Labeling on Google Bookmark Alternative Fuels Data Center: Fuel Economy Test Procedures and Labeling on Delicious Rank Alternative Fuels Data Center: Fuel Economy Test Procedures and Labeling on Digg Find More places to share Alternative Fuels Data Center: Fuel Economy Test Procedures and Labeling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Fuel Economy Test Procedures and Labeling

457

Chapter 31 - Contract Cost Principles and Procedures | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 - Contract Cost Principles and Procedures Chapter 31 - Contract Cost Principles and Procedures 31.1CostReasonableness0.pdf 31.2AllowableFoodandBeverageCostsatDOEandCo...

458

Alternative Fuels Data Center: Biodiesel Quality Testing Procedures  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Biodiesel Quality Biodiesel Quality Testing Procedures to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Quality Testing Procedures on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Quality Testing Procedures on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Quality Testing Procedures on Google Bookmark Alternative Fuels Data Center: Biodiesel Quality Testing Procedures on Delicious Rank Alternative Fuels Data Center: Biodiesel Quality Testing Procedures on Digg Find More places to share Alternative Fuels Data Center: Biodiesel Quality Testing Procedures on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Biodiesel Quality Testing Procedures Each biodiesel or other renewable diesel producer, distributor, or importer

459

Description of ALARMA: the alarm algorithm developed for the Nuclear Car Wash  

SciTech Connect

The goal of any alarm algorithm should be that it provide the necessary tools to derive confidence limits on whether the existence of fissile materials is present in cargo containers. It should be able to extract these limits from (usually) noisy and/or weak data while maintaining a false alarm rate (FAR) that is economically suitable for port operations. It should also be able to perform its analysis within a reasonably short amount of time (i.e. {approx} seconds). To achieve this, it is essential that the algorithm be able to identify and subtract any interference signature that might otherwise be confused with a fissile signature. Lastly, the algorithm itself should be user-intuitive and user-friendly so that port operators with little or no experience with detection algorithms may use it with relative ease. In support of the Nuclear Car Wash project at Lawrence Livermore Laboratory, we have developed an alarm algorithm that satisfies the above requirements. The description of the this alarm algorithm, dubbed ALARMA, is the purpose of this technical report. The experimental setup of the nuclear car wash has been well documented [1, 2, 3]. The presence of fissile materials is inferred by examining the {beta}-delayed gamma spectrum induced after a brief neutron irradiation of cargo, particularly in the high-energy region above approximately 2.5 MeV. In this region naturally occurring gamma rays are virtually non-existent. Thermal-neutron induced fission of {sup 235}U and {sup 239}P, on the other hand, leaves a unique {beta}-delayed spectrum [4]. This spectrum comes from decays of fission products having half-lives as large as 30 seconds, many of which have high Q-values. Since high-energy photons penetrate matter more freely, it is natural to look for unique fissile signatures in this energy region after neutron irradiation. The goal of this interrogation procedure is a 95% success rate of detection of as little as 5 kilograms of fissile material while retaining at most .1% false alarm rate. Plywood is used to simulate hydrogenous cargo material and steel (pipes) is used to simulate metallic cargo. The wood consists of 120 x 240 cm sheets and has approximately .65 g/cm{sup 3}. The steel pipes have approximately 10 cm diameters x 6.4 mm wall thickness are .6 g/cm{sup 3}. Fissile sources consist of a ''large'' (380 g) and ''small'' (250 g) sample of HEU (U{sub 3}O{sub 8} 94% enriched). Note that the masses of the HEU sources used in our experimental runs are at least an order of magnitude smaller than 5 kilograms. Runs are done with either wood or steel cargoes stacked at various heights and the HEU sources placed at various depths within the cargo.

Luu, T; Biltoft, P; Church, J; Descalle, M; Hall, J; Manatt, D; Mauger, J; Norman, E; Petersen, D; Pruet, J; Prussin, S; Slaughter, D

2006-11-28T23:59:59.000Z

460

Records Management Procedures for Storage, Transfer and Retrieval...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

procedures, and essential transactions, including record material containing evidence or information appropriate for preservation because of its administrative, legal,...

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Model Recovery Procedure for Response to a Radiological Transportation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Response to a Radiological Transportation Incident Model Recovery Procedure for Response to a Radiological Transportation Incident This Transportation Emergency...

462

FORMALISMS FOR MORPHOGRAPHEMIC DESCRIPTION Alan Black. Graeme Ritchie.  

E-Print Network (OSTI)

FORMALISMS FOR MORPHOGRAPHEMIC DESCRIPTION Alan Black. Graeme Ritchie. Dept of Arr~.~al I.; Pulman, Steve G.; Black, Alan W.; and Ru~ell Graham J. 1987 A Compu- tation&! Framework For Lex ~ ~ . Russell Graham J.; Pulman, Steve G.; Ritchle, Gzaeme D.; and Black, Alan W. 1986 A Dic- tionary

463

Integrated Requirements Management System and System Design Description  

Science Conference Proceedings (OSTI)

This document provides a System Design Description (SDD) for the Integrated Requirements Management System (IRMS) database. The database manager chosen for this task was the Dynamic Object Oriented Requirements System (DOORS) Version 5.0 or greater. The schema for the IRMS is described with respect to the CH2M Hill Hanford Group, Inc requirements management processes.

ACREE, C.D.

2001-03-27T23:59:59.000Z

464

An informal description of Standard OIL and Instance OIL  

E-Print Network (OSTI)

An informal description of Standard OIL and Instance OIL 28 November 2000 Sean Bechhofer (1) Jeen to be specified in some language. This paper introduces the newest version of OIL ­ the ontology inference layer of the DAML language, with working name DAML-OIL, was proposed in a message to the rdf-logic mailing list

Ohlbach, Hans Jürgen

465

Flammable gas tank exhauster interlock (FGTEI) computer software design description  

SciTech Connect

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current-carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.0.

1996-09-10T23:59:59.000Z

466

Flammable gas tank exhauster interlock (FGTEI) computer software design description  

SciTech Connect

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.O., Westinghouse Hanford

1996-09-20T23:59:59.000Z

467

Flammable gas tank exhauster interlock (LFGTEI) computer software design description  

SciTech Connect

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.O.; Irvitt, R.W., Fluor Daniel Hanford

1997-02-21T23:59:59.000Z

468

Fusions of Description Logics Franz Baader and Carsten Lutz  

E-Print Network (OSTI)

in the fusion is still decidable. As an example, we consider the DLs (i) ALCF , which extends the basic DL ALC, subsumption of concept descriptions is known to be decidable [9, 11, 1]. However, their union ALCF +;Ã?;t has an undecidable subsumption problem [2]. This undecidability result depends on the fact that, in ALCF +;Ã?

Baader, Franz

469

Representing a Robotic Domain Using Temporal Description Logics  

E-Print Network (OSTI)

in Section 2, the temporal language TL­ALCF is introduced in Section 3. The lan­ guage syntax is first (undefinedness) p; q ! f j (atomic feature) p ffi q (path) Figure 1: Syntax rules for the ALCF Description Logic the model theoretic semantics of TL­ALCF , together with a formal definition of the subsumption and instance

Franconi, Enrico

470

THE FUZZY DESCRIPTION LOGIC ALCFLH Steffen Holldobler, Nguyen Hoang Nga  

E-Print Network (OSTI)

, Vietnam khangtd@it-hut.edu.vn ABSTRACT In this paper, we present the fuzzy description logic ALCF LH. ALCF LH is based on ALCF H, but linear hedges are used instead of exponential ones. This allows to solve hedges. They have been applied to fuzzy logic in various ways (see e.g. [3]). In ALCF H [1, 2] hedges

Hoelldobler, Steffen

471

Representing a robotic domain using temporal description logics  

Science Conference Proceedings (OSTI)

A temporal logic for representing and reasoning on a robotic domain is presented. Actions are represented by describing what is true while the action itself is occurring, and plans are constructed by temporally relating actions and world states. The ... Keywords: Action Representation, Description Logic, Robotics, Temporal Logic

Alessandro Artale; Enrico Franconi

1999-04-01T23:59:59.000Z

472

Description: Lithium batteries are used daily in our work  

E-Print Network (OSTI)

with batteries from the same package or with the same expiration date. Avoid at all costs batteries that haveDescription: Lithium batteries are used daily in our work activities from flashlights, cell phones containing one SureFire 3-volt non-rechargeable 123 lithium battery and one Interstate 3-volt non

473

Description of Facilities and Resources Oak Ridge National Laboratory  

E-Print Network (OSTI)

1 Description of Facilities and Resources Oak Ridge National Laboratory and the UT-ORNL Joint National Laboratory (ORNL) hosts three petascale computing facilities: the Oak Ridge Leadership Computing Center (NCRC), formed as collaboration between ORNL and the National Oceanographic and Atmospheric

474

HEAT THAT GROWS ON TREES Short description of timber energy  

E-Print Network (OSTI)

HEAT THAT GROWS ON TREES 6 Short description of timber energy · Along with hydro-electric power, wood is Switzerland's most important energy source. · Wood is CO2-neutral: in sustainably managed, a balance is maintained between growth and combustion). · Wood energy represents a welcome potential use

475

Unification of Concept Terms in Description Logics Franz Baader \\Lambda  

E-Print Network (OSTI)

Unification of Concept Terms in Description Logics Franz Baader \\Lambda LuFg Theoretical Computer, USA e­mail: dran@cs.albany.edu Abstract Unification of concept terms is a new kind of in­ ference concept names by con­ cept terms before testing for equivalence. We show that this inference problem

Baader, Franz

476

Framework for an automated comparison of description logic reasoners  

Science Conference Proceedings (OSTI)

OWL is an ontology language developed by the W3C, and although initially developed for the Semantic Web, OWL has rapidly become a de facto standard for ontology development in general. The design of OWL was heavily influenced by research in description ...

Tom Gardiner; Dmitry Tsarkov; Ian Horrocks

2006-11-01T23:59:59.000Z

477

Manual of procedures for the operation of bench-scale anaerobic digesters  

DOE Green Energy (OSTI)

The successful operation of any laboratory-scale biological system is often a difficult and frustrating experience. This is especially true when dealing with the anaerobic digestion process. Because of the stringent environmental requirements associated with anaerobic digesters, efficient operation of bench-scale units requires rigid monitoring and control. The purpose of this manual is to present the methods and procedures which are followed in bench-scale anaerobic digestion studies at Pacific Northwest Laboratory (PNL). Among the topics discussed are operating parameters, a description of the experimental system, typical digestion substrates, operational procedures, analytical techniques, and safety considerations. The document serves as a technical guide to PNL personnel assigned to a U.S. Department of Energy sponsored program evaluating the effect of powdered activated carbon on the anaerobic digestio of sewage sludge. It should be noted that the methods described in this manual do not necessarily represent the best or only means of conducting the research. They are merely procedures that have been found to be successful at PNL. It is hoped that this information may be useful to other researchers who are contemplating or pursuing bench-scale studies of their own.

Spencer, R.R.

1978-12-01T23:59:59.000Z

478

The Spatial Analysis of Acid Precipitation Data  

Science Conference Proceedings (OSTI)

Kriging, an interpolation procedure that minimizes interpolation error and gives an accurate estimate of that error, is shown to be an appropriate objective analysis procedure for the study of spatial variability and structure in acid ...

Peter L. Finkelstein

1984-01-01T23:59:59.000Z

479

Reporting Cooperating Agencies in Implementing the Procedural Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reporting Cooperating Agencies in Implementing the Procedural Reporting Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act Reporting Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act The purpose of this Council on Environmental Quality Memorandum is to establish a revised report to ensure that all Federal agencies are consistently reporting designation of Federal and non-federal cooperating agencies in the preparation of analyses and documentation required by the National Environmental Policy Act (NEPA). REPORTING COOPERATING AGENCIES IN IMPLEMENTING THE PROCEDURAL REQUIREMENTS OF THE NATIONAL ENVIRONMENTAL POLICY ACT More Documents & Publications Cooperating Agencies in Implementing the Procedural Requirements of the

480

Reporting Cooperating Agencies in Implementing the Procedural Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reporting Cooperating Agencies in Implementing the Procedural Reporting Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act Reporting Cooperating Agencies in Implementing the Procedural Requirements of the National Environmental Policy Act The purpose of this Council on Environmental Quality Memorandum is to establish a revised report to ensure that all Federal agencies are consistently reporting designation of Federal and non-federal cooperating agencies in the preparation of analyses and documentation required by the National Environmental Policy Act (NEPA). REPORTING COOPERATING AGENCIES IN IMPLEMENTING THE PROCEDURAL REQUIREMENTS OF THE NATIONAL ENVIRONMENTAL POLICY ACT More Documents & Publications Cooperating Agencies in Implementing the Procedural Requirements of the

Note: This page contains sample records for the topic "descriptive analysis procedures" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Hazardous Materials Incident Response Procedure | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hazardous Materials Incident Response Procedure Hazardous Materials Incident Response Procedure Hazardous Materials Incident Response Procedure The purpose of this procedure is to provide guidance for developing an emergency response plan, as outlined in OSHA's 29 CFR 1910.120(q), for facility response. This model has been adopted and applied to work for response to transportation accidents involving radioactive material or other hazardous materials incidents Hazardous Materials Incident Response Procedure.docx More Documents & Publications Handling and Packaging a Potentially Radiologically Contaminated Patient Decontamination Dressdown at a Transportation Accident Involving Radioactive Material Medical Examiner/Coroner on the Handling of a Body/Human Remains that are Potentially Radiologically Contaminated

482

Recommendations for reducing ambiguity in written procedures.  

SciTech Connect

Previous studies in the nuclear weapons complex have shown that ambiguous work instructions (WIs) and operating procedures (OPs) can lead to human error, which is a major cause for concern. This report outlines some of the sources of ambiguity in written English and describes three recommendations for reducing ambiguity in WIs and OPs. The recommendations are based on commonly used research techniques in the fields of linguistics and cognitive psychology. The first recommendation is to gather empirical data that can be used to improve the recommended word lists that are provided to technical writers. The second recommendation is to have a review in which new WIs and OPs and checked for ambiguities and clarity. The third recommendation is to use self-paced reading time studies to identify any remaining ambiguities before the new WIs and OPs are put into use. If these three steps are followed for new WIs and OPs, the likelihood of human errors related to ambiguity could be greatly reduced.

Matzen, Laura E.

2009-11-01T23:59:59.000Z

483

MIT validation probe acceptance test procedure  

SciTech Connect

As part of the Multi-Functional Instrument Trees (MITs) a Validation Probe is being fabricated by Los Alamos National Laboratories (LANL). The Validation Probe assembly is equipped with a Winch, depth counter, and a Resistance Temperature Detector (RTD) which will render a means for verifying the temperature readings of which will render a means for verifying the temperature readings of the MIT thermocouples. The purpose of this Acceptance Test Procedure (ATP) is to provide verification that the Validation Probe functions properly and accordingly to LANL design and specification. This ATP will be used for all Validation Probes procured from LANL. The ATP consists of a receiving inspection, RTD ambient temperature; RTD electrical failure, RTD insulation resistance, and accurate depth counter operation inspections. The Validation Probe is composed of an intank probe, a cable and winching system, and a riser extension (probe guide) which bolts onto the MIT. The validation`s thermal sensor is an RTD that is housed in a 0.062 inch diameter, magnesium oxide fill, 316 stainless steel tube. The sheath configuration provides a means for spring loading the sensor firmly against the validation tube`s inner wall. A 45 pound cylindrical body is connected above the sheath and is used as a force to lower the probe into the tank. This cylindrical body also provides the means to interconnect both electrically and mechanically to the winch system which lowers the probe to a specified location within the validation tube located in the tank.

Escamilla, S.A.

1994-08-23T23:59:59.000Z

484

Fusions of Description Logics and Abstract Description Franz Baader 1 Carsten Lutz 1 Holger Sturm 2 Frank Wolter 3  

E-Print Network (OSTI)

the DLs (i) ALCF , which extends the basic DL ALC by functional roles (features) and the same descriptions is known to be decidable [30, 44, 3]. However, their union ALCF +;Ã?;t has an undecidable subsumption problem [5]. This undecidability result depends on the fact that, in ALCF +;Ã?;t , the role

Wolter, Frank

485

Procedures and guidelines for the Policy Management Authority  

E-Print Network (OSTI)

and Environmental Research · Fusion Energy Sciences · High Energy Physics · Nuclear Physics Joe Burrescia ESnet;· A description of each ESnet service ­ Example: · Service: Network Layer Connectivity ­ Description: ESnet ­ Availability: ESnet strives for 99.9% availability, and most often exceeds by a wide margin What is it? #12

486

Past DOE Technical Standards Program Procedures | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Past DOE Technical Standards Program Procedures Past DOE Technical Standards Program Procedures Past DOE Technical Standards Program Procedures TSPP July 2009 September 26, 2009 DOE-TSPP-0, Technical Standards Program Procedures - July 1, 2009 This document is the summary page for all of the DOE Technical Standards Program Procedures. August 26, 2009 DOE-TSPP-1, Technical Standards Program Responsibilities - July 1, 2009 This procedure describes the responsibilities of persons who are charged with implementing the DOE Technical Standards Program. August 26, 2009 DOE-TSPP-2, Establishing the Need for a Technical Standard - July 1, 2009 This procedure provides guidance for the routine maintenance of DOE Technical Standards. August 26, 2009 DOE-TSPP-3, Use of Non-Government Standards and Interaction with Non-Government Standards Bodies - July 1, 2009

487

CRAD, Verification and Validation of Facilities Procedures Assessment Plan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Verification and Validation of Facilities Procedures Verification and Validation of Facilities Procedures Assessment Plan CRAD, Verification and Validation of Facilities Procedures Assessment Plan Performance Objective: The purpose of this assessment is verify and validate the process for the development of operations procedures and that procedures are in place which provide direction to personnel to ensure that the facility is operated within its design bases. Criteria: Operations procedures should be written to provide specific direction for operating systems and equipment during normal and postulated abnormal and emergency conditions. (DOE O 5480.19 A) Operations procedures should provide appropriate direction to ensure that the facility is operated within its design bases and should be effectively used to support safe operations of the facility. (DOE O

488

Model of Procedure Usage – Results from a Qualitative Study to Inform Design of Computer-Based Procedures  

SciTech Connect

The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use performance, researchers, together with the nuclear industry, have been looking at replacing the current paper-based procedures with computer-based procedure systems. The concept of computer-based procedures is not new by any means; however most research has focused on procedures used in the main control room. Procedures reviewed in these efforts are mainly emergency operating procedures and normal operating procedures. Based on lessons learned for these previous efforts we are now exploring a more unknown application for computer based procedures - field procedures, i.e. procedures used by nuclear equipment operators and maintenance technicians. The Idaho National Laboratory, the Institute for Energy Technology, and participants from the U.S. commercial nuclear industry are collaborating in an applied research effort with the objective of developing requirements and specifications for a computer-based procedure system to be used by field operators. The goal is to identify the types of human errors that can be mitigated by using computer-based procedures and how to best design the computer-based procedures to do this. The underlying philosophy in the research effort is “Stop – Start – Continue”, i.e. what features from the use of paper-based procedures should we not incorporate (Stop), what should we keep (Continue), and what new features or work processes should be added (Start). One step in identifying the Stop – Start – Continue was to conduct a baseline study where affordances related to the current usage of paper-based procedures were identified. The purpose of the study was to develop a model of paper based procedure use which will help to identify desirable features for computer based procedure prototypes. Affordances such as note taking, markups, sharing procedures between fellow coworkers, the use of multiple procedures at once, etc. were considered. The model describes which affordances associated with paper based procedures should be transferred to computer-based procedures as well as what features should not be incorporated. The model also provides a means to identify what new features not present in paper based procedures need to be added to the computer-based procedures to further enhance performance. The next step is to use the requirements and specifications to develop concepts and prototypes of computer-based procedures. User tests and other data collection efforts will be conducted to ensure that the real issues with field procedures and their usage are being addressed and solved in the best manner possible. This paper describes the baseline study, the construction of the model of procedure use, and the requirements and specifications for computer-based procedures that were developed based on the model. It also addresses how the model and the insights gained from it were used to develop concepts and prototypes for computer based procedures.

Johanna H Oxstrand; Katya L Le Blanc

2012-07-01T23:59:59.000Z

489

A density-temperature description of the outer electron radiation belt during geomagnetic storms  

Science Conference Proceedings (OSTI)

Electron flux measurements from 7 satellites in geosynchronous orbit from 1990-2007 are fit with relativistic bi-Maxwellians, yielding a number density n and temperature T description of the outer electron radiation belt. For 54.5 spacecraft years of measurements the median value ofn is 3.7x10-4 cm-3 and the median value ofT is 142 keY. General statistical properties of n, T, and the 1.1-1.5 MeV flux J are investigated, including local-time and solar-cycle dependencies. Using superposed-epoch analysis triggered on storm onset, the evolution of the outer electron radiation belt through high-speed-steam-driven storms is investigated. The number density decay during the calm before the storm is seen, relativistic-electron dropouts and recoveries from dropout are investigated, and the heating of the outer electron radiation belt during storms is examined. Using four different triggers (SSCs, southward-IMF CME sheaths, southward-IMF magnetic clouds, and minimum Dst), CME-driven storms are analyzed with superposed-epoch techniques. For CME-driven storms an absence of a density decay prior to storm onset is found, the compression of the outer electron radiation belt at time of SSC is analyzed, the number-density increase and temperature decrease during storm main phase is seen, and the increase in density and temperature during storm recovery phase is observed. Differences are found between the density-temperature and the flux descriptions, with more information for analysis being available in the density-temperature description.

Borovsky, Joseph E [Los Alamos National Laboratory; Cayton, Thomas E [Los Alamos National Laboratory; Denton, Michael H [LANCASTER UNIV

2009-01-01T23:59:59.000Z

490

Moving through imagined space: Mentally simulating locomotion during spatial description reading  

E-Print Network (OSTI)

environments from a first-person, ground-level perspective whereas survey descriptions use an aerial overview and memory for two different types of spatial descriptions, route and survey. Route descriptions describe fast-paced versus slow-paced sounds. When reading survey descriptions, however, readers only modulated

Patel, Aniruddh D.

491

Decision analysis: a tool to guide the R and D selection of alternative energy sources  

DOE Green Energy (OSTI)

The array of alternative energy sources which are vying for the federal government's R and D dollar is formidable when compared to the politically acceptable amount which can be used to fund the research. To guide how these funds should be dispersed, a rational, defensible procedure is needed which can repeatedly be applied as new technologies and new information become available. The procedure advanced in this paper is a decision analysis technique known as multi attribute decision analysis (MADA) and its use is illustrated in an evaluation and ranking of solar thermal electric power generating systems. Since the ultimate purchase decision is made in the market place, the preferences of potential users have been sampled and brought to bear on the ranking. The focus of this description is on the formulation of the problem structure and the decision model, the treatment of uncertainty, and how the results relate to the questions asked by and of the Department of Energy, which funded the study. A final note proposes how decision analysis can be used to address the broader questions of choice among competing technologies with cautions concerning misuse of the procedure.

Kriz, T.

1980-05-01T23:59:59.000Z

492

Descriptions of Task Order Schedules and Placement of Pricing Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RFP DE-RP36-06GO96031 RFP DE-RP36-06GO96031 10/11/2007 ATTACHMENT J-5 DESCRIPTIONS OF TASK ORDER SCHEDULES AND PLACEMENT OF PRICING INFORMATION J-5.1 DESCRIPTIONS OF TASK ORDER (TO) SCHEDULES (SCHEDULE TEMPLATES ARE PROVIDED IN ATTACHMENT J-6) J-5.1.1 Schedule TO-1 (Preliminary Assessment - PA) - Proposed Guaranteed Cost Savings and Contractor Payments - Schedule TO-1 (PA) shall be submitted to present the contractor's estimated cost savings, proposed guaranteed cost savings, and contractor payments. TO-1 (PA) values submitted may be in estimated ranges. Based on the preliminary survey and agency discussions, the contractor shall submit a completed Schedule TO-1 (PA) containing: A. Column (a) - Contractor submits proposed estimated cost savings during the implementation period, prior to full project acceptance (see most recent version

493

Nonlinear Connections and Description of Photon-like Objects  

E-Print Network (OSTI)

This paper aims to present a general idea for description of spatially finite physical objects with a consistent nontrivial translational-rotational dynamical structure and evolution as a whole, making use of the mathematical concepts and structures connected with the Frobenius integrability/nonintegrability theorems given in terms of distributions on manifolds with corresponding curvature defined by the Nijenhuis operator. The idea is based on consideration of {\\it nonintegrable} subdistributions of some appropriate completely integrable distribution (differential system) on a manifold and then to make use of the corresponding curvatures as generators of measures of interaction, i.e. of energy-momentum exchange among the physical subsystems mathematically represented by the nonintegrable subdistributions. The concept of photon-like object is introduced and description of such objects in these terms is given.

Stoil Donev; Maria Tashkova

2008-06-25T23:59:59.000Z

494

Nonlinear Connections and Description of Photon-like Objects  

E-Print Network (OSTI)

This paper aims to present a general idea for description of spatially finite physical objects with a consistent nontrivial translational-rotational dynamical structure and evolution as a whole, making use of the mathematical concepts and structures connected with the Frobenius integrability/nonintegrability theorems given in terms of distributions on manifolds with corresponding curvature defined by the Nijenhuis operator. The idea is based on consideration of {\\it nonintegrable} subdistributions of some appropriate completely integrable distribution (differential system) on a manifold and then to make use of the corresponding curvatures as generators of measures of interaction, i.e. of energy-momentum exchange among the physical subsystems mathematically represented by the nonintegrable subdistributions. The concept of photon-like object is introduced and description of such objects in these terms is given.

Donev, Stoil

2008-01-01T23:59:59.000Z

495

System Advisor Model, SAM 2011.12.2: General Description  

NLE Websites -- All DOE Office Websites (Extended Search)

System Advisor Model, System Advisor Model, SAM 2011.12.2: General Description Paul Gilman and Aron Dobos Technical Report NREL/TP-6A20-53437 February 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 System Advisor Model, SAM 2011.12.2: General Description Paul Gilman and Aron Dobos Prepared under Task No. SS12.1130 Technical Report NREL/TP-6A20-53437 February 2012 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

496

Descriptions of Task Order Schedules and Placement of Pricing Information  

NLE Websites -- All DOE Office Websites (Extended Search)

RFP DE-RP36-06GO96031 RFP DE-RP36-06GO96031 10/11/2007 ATTACHMENT J-5 DESCRIPTIONS OF TASK ORDER SCHEDULES AND PLACEMENT OF PRICING INFORMATION J-5.1 DESCRIPTIONS OF TASK ORDER (TO) SCHEDULES (SCHEDULE TEMPLATES ARE PROVIDED IN ATTACHMENT J-6) J-5.1.1 Schedule TO-1 (Preliminary Assessment - PA) - Proposed Guaranteed Cost Savings and Contractor Payments - Schedule TO-1 (PA) shall be submitted to present the contractor's estimated cost savings, proposed guaranteed cost savings, and contractor payments. TO-1 (PA) values submitted may be in estimated ranges. Based on the preliminary survey and agency discussions, the contractor shall submit a completed Schedule TO-1 (PA) containing: A. Column (a) - Contractor submits proposed estimated cost savings during the implementation period, prior to full project acceptance (see most recent version

497

Property:Description of Camera Types | Open Energy Information  

Open Energy Info (EERE)

Camera Types Camera Types Jump to: navigation, search Property Name Description of Camera Types Property Type Text Pages using the property "Description of Camera Types" Showing 25 pages using this property. (previous 25) (next 25) A Alden Large Flume + fully-submersible; multiplexor for four cameras; digital recording from all cameras; digital handheld Alden Small Flume + fully-submersible; multiplexor for four cameras; digital recording from all cameras; digital handheld Alden Tow Tank + Fully-submersible; multiplexor for four cameras; digital recording from all cameras; digital handheld Alden Wave Basin + Fully-submersible; multiplexor for four cameras; digital recording from all cameras; digital handheld C Conte Large Flume + Conventional underwater video, 4; high speed (1000 fps), 1

498

Low Dose Radiation Research Program: Current Funded Project Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Funded Project Descriptions Funded Project Descriptions Effects Of Low Doses of Radiation on DNA Repair Jointly funded by NASA and DOE Eric J Ackerman Pacific Northwest National Laboratory Richland, WA 99352 Dr. Ackerman will study the effect of low doses of ionizing radiation on the repair of different types of damage to DNA, including damage from ionizing radiation and that produced by the normal internal operation of the cell. Using a very sensitive technique called host cell reactivation assay (HCR), he will quantitatively measure the repair of each type of DNA damage and thereby measure if the cellular repair system itself has been damaged. He will also determine if unique forms of DNA repair system damage are induced by low doses of cosmic radiation exposure present during space

499

Perturbative QCD Description of Heavy and Light Flavor Jet Quenching  

Science Conference Proceedings (OSTI)

We present a successful description of the medium modification of light and heavy flavor jets within a perturbative-QCD-based approach. Only the couplings involving hard partons are assumed to be weak. The effect of the medium on a hard parton, per unit time, is encoded in terms of three nonperturbative, related transport coefficients which describe the transverse momentum squared gained, the elastic energy loss, and diffusion in elastic energy transfer. Scaling the transport coefficients with the temperature of the medium, we achieve a good description of the centrality dependence of the suppression and the azimuthal anisotropy of leading hadrons. Imposing additional constraints based on leading order (LO) hard thermal loop (HTL) effective theory leads to a worsening of the fit, implying the necessity of computing transport coefficients beyond LO HTL.

Qin Guangyou [Department of Physics, Duke University, Durham, North Carolina 27708 (United States); Department of Physics, Ohio State University, Columbus, Ohio 43210 (United States); Majumder, Abhijit [Department of Physics, Ohio State University, Columbus, Ohio 43210 (United States)

2010-12-31T23:59:59.000Z

500

Active transport: A kinetic description based on thermodynamic grounds  

E-Print Network (OSTI)

We show that active transport processes in biological systems can be understood through a local equilibrium description formulated at the mesoscale, the scale to describe stochastic processes. This new approach uses the method established by nonequilibrium thermodynamics to account for the irreversible processes occurring at this scale and provides nonlinear kinetic equations for the rates in terms of the driving forces. The results show that the application domain of nonequilibrium thermodynamics method to biological systems goes beyond the linear domain. A model for transport of Ca$^{2+}$ by the Ca$^{2+}$-ATPase, coupled to the hydrolysis of adenosine-triphosphate is analyzed in detail showing that it depends on the reaction Gibbs energy in a non-linear way. Our results unify thermodynamic and kinetic descriptions, thereby opening new perspectives in the study of different transport phenomena in biological systems.

S. Kjelstrup; J. M. Rubi; D. Bedeaux

2004-12-17T23:59:59.000Z