National Library of Energy BETA

Sample records for description note power-cost

  1. Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notes Notes Why the June 1995 ERSUG Meeting is Important Bill McCurdy describes below a competitive process through which a decision will be made by MICS Division (formerly the OSC) in the June, 1995 timeframe to: (1) possibly move NERSC to Lawrence Berkeley National Laboratory, and (2) redefine to some extent the mission of the Center. All of this would be effected within a significantly reduced cost envelope. The LLNL proposal to keep NERSC where it is and the LBL proposal may soon be

  2. Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notes Notes Live Media Streaming via RealPlayer Media streaming of these lectures will be provided via RealPlayer. Users of Windows- or Macintosh-based computers will be able to see and hear the presentation by way of the following procedures. 1. Download and open the slide files onto your computer. 2. Make certain you have the current version of RealPlayer installed. These are available at the Real Free Player Download web site 3. Start the RealPlayer application, and then enter the following

  3. Backup Power Cost of Ownership Analysis and Incumbent Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison This cost of ownership analysis identifies the factors impacting the value proposition for fuel cell ...

  4. Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison This cost of ownership analysis identifies the factors impacting the value proposition for fuel cell backup power and presents the estimated annualized cost of ownership for fuel cell backup power systems compared with the incumbent technologies of battery and diesel generator systems. The analysis compares three

  5. Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison J. Kurtz, G. Saur, S. Sprik, and C. Ainscough National Renewable Energy Laboratory NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. Technical Report NREL/TP-5400-60732 September 2014

  6. VOL2NOTE.CHP:Corel VENTURA

    Gasoline and Diesel Fuel Update (EIA)

    B Explanatory Notes The following Explanatory Notes are provided to assist in understanding and interpreting the data presented in this publication. * Note 1. Petroleum Supply Reporting System * Note 2. Monthly Petroleum Supply Reporting System * Note 3. Technical Notes for Detailed Statistics Tables * Note 4. Domestic Crude Oil Production * Note 5. Export Data * Note 6. Quality Control and Data Revision * Note 7. Frames Maintenance * Note 8. Descriptive Monthly Statistics * Note 9. Practical

  7. Original Workshop Proposal and Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notes for Vis Requirements Original Workshop Proposal and Description Original Workshop Proposal and Description Visualization Requirements for Computational Science and ...

  8. OTS NOTE

    Office of Legacy Management (LM)

    941 OTS NOTE DATE: July 2, 1990 TO: W. Alexander Williams FROM : Don Mackenzie d%? SUBJECT: Elimination of 3 Facilities from NSRAP . + 9 Enclosed are elimination recommendations...

  9. OTS NOTE

    Office of Legacy Management (LM)

    c3 Alexander Williams FROM: Ed Mitchellcm SUBJECT: Babcock and Wilcox Elimination Recommendation The purpose of this note is to provide you with certain inf regarding the...

  10. OTS NOTE

    Office of Legacy Management (LM)

    * pp4 r G- .2- OTS NOTE DATE: April 24, 1991 TO: Alexander Williams FROM: Dan Stou tF L SUBJECT: American Potash and Chemical Company Elimination Recommendation The attached...

  11. Blue Note

    SciTech Connect (OSTI)

    Murray Gibson

    2007-04-27

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  12. Blue Note

    ScienceCinema (OSTI)

    Murray Gibson

    2010-01-08

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  13. OTS NOTE

    Office of Legacy Management (LM)

    @ 'Alexander Williams FROM: Ed Mitchellqm SUBJECT: W.R. Grace Elimination Recommendation The purpose of this note is to provide you with certain information regarding the recommendation to eliminate W.R. Grace Company (the former Heavy Minerals Company), Chicago,Illinois, from consideration as a site under FUSRAP. Enclosed is a memo dated July 9, 1990: FUSRAP Considered Site Recommendation, for W.R. Grace Company. It recommends elimination in accordance with FUSRAP protocol. Also enclosed is

  14. EDITORS NOTE:

    Energy Savers [EERE]

    EDITORS NOTE: This Strategic Plan covers the Department of Energy including the National Nuclear Security Administration, the Energy Information Administration, and the Power Marketing Administrations. As an independent regulatory agency, the Federal Energy Regulatory Commission (FERC) prepares separate documents. See their web page at: http://www.ferc.gov/about/strat-docs.asp. This document is also available on the Department of Energy's web site: http://www.energy.gov. This Strategic Plan was

  15. TECHNICAL NOTE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TECHNICAL NOTE Broadband extreme-ultraviolet survey spectrometer for short-time-scale experiments B. E. Chapman, D. J. Den Hartog, and R. J. Fonck A fast and inexpensive spectrometer system has been developed to record extreme-UV impurity spectra in a magnetic-fusion-research device. To simplify the vacuum system, light is passed out of the spectrom- eter's vacuum to the detector with a sodium-salicylate-coated, fiber-optic coupler. This coupler is positioned so that the focal field is nearly

  16. Testbed Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Testbed Description Network R&D Overview Experimental Network Testbeds 100G SDN Testbed Testbed Description Testbed Results Proposal Process Terms and Conditions Dark Fiber Testbed...

  17. Notes for Visualization Requirememnts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notes for Visualization Requirememnts Notes from June 5, 2002, Visualization Requirements for DOE-Sponsored Computational Science and Engineering Applications A DOE Workshop to Be ...

  18. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Description Inspiring girls to recognize their potential and pursue opportunities in science, technology, engineering and mathematics. Through Expanding Your Horizon (EYH) ...

  19. Meeting Summary Notes

    Office of Environmental Management (EM)

    records check list: Information that should be requested by SOMD of receiving facility Medical records: Problem list: list of all past and current medical diagnosis and surgical procedures. Medication list Physical exam notes Lab and diagnostic testing results Pertinent HRP notes. (temporary removals, medical and psychological issues) Psychiatric records: A summary or actual note of the psychiatric or psychological evaluation

    Medical Records Checklist - September 14, 2010 Medical Records

  20. Calculation note review

    SciTech Connect (OSTI)

    Ramble, A.L.

    1996-09-30

    This document contains a review of the calculation notes which were prepared for the Tank Waste Remediation System Basis for Interim Operation.

  1. Testbed Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Testbed Description Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds 100G SDN Testbed Testbed Description Proposal Process Terms and Conditions Dark Fiber Testbed Test Circuit Service Testbed Results Current Testbed Research Previous Testbed Research Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600

  2. Meeting Notes and Presentations

    Office of Environmental Management (EM)

    Corporate Board Notes and Slides Notes from EM Corporate QA Board Tele-Conference - February 22, 2010 1 of 2 General: Attendance of voting board members was documented. All members were present or had a representative present on the call. Previous 5 Focus Areas: Dave Tuttel presented the proposed closeout of the previous 5 focus areas for the EM Corporate Board. * Focus Area 1 (Requirements Flow Down) - Board voted to close the focus area (unanimous) * Focus Area 2 (Adequate NQA-1 Suppliers) -

  3. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National

  4. Original Workshop Proposal and Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Notes for Vis Requirements » Original Workshop Proposal and Description Original Workshop Proposal and Description Visualization Requirements for Computational Science and Engineering Applications Proposal for a DoE Workshop to Be Held 
at the Berkeley Marina Radisson Hotel,
Berkeley, California, June 5, 2002
(date and location are tenative) Workshop Co-organizers: Bernd Hamann 
University of California-Davis Lawrence Berkeley Nat'l Lab. E. Wes Bethel 
Lawrence Berkeley Nat'l Lab.

  5. Template:Note | Open Energy Information

    Open Energy Info (EERE)

    search Note Note: Usage Method 1 The following displays the note icon and the word 'Note:'. You can follow this with whatever textimagesmarkup you like, and it works...

  6. Notes and Definitions

    Weekly Natural Gas Storage Report (EIA)

    Notes and Definitions This report tracks U.S. natural gas inventories held in underground storage facilities. The weekly stocks generally are the volumes of working gas as of the report date. The "net change" in reported stock levels reflects all events affecting working gas in storage, including injections, withdrawals, and reclassifications between base and working gas. The "implied flow" estimate represents movements of working natural gas into or out of underground

  7. Manhattan Project: Sources and Notes

    Office of Scientific and Technical Information (OSTI)

    SOURCES AND NOTES Resources > Sources Below are the collected specific notes for the text and images used on the pages of this web site. For a discussion of the most important works on the Manhattan Project, see the "Suggested Readings." For a general discussion of the use of sources in this web site, see "A Note on Sources." To scan the sources and notes for various categories, choose from the list below. To view the sources and notes for a specific web page, see the

  8. Calculation notes that support accident scenario and consequence determination of a waste tank criticality

    SciTech Connect (OSTI)

    Crowe, R.D., Westinghouse Hanford

    1996-08-02

    The purpose of this calculation note is to provide the basis forcriticality consequences for the Tank Farm Safety Analysis Report(FSAR). Criticality scenario is developed and details and description of the analysis methods are provided.

  9. Calculation notes that support accident scenario and consequence of the evaporator dump

    SciTech Connect (OSTI)

    Crowe, R.D., Westinghouse Hanford

    1996-09-09

    The purpose of this calculation note is to provide the basis for evaporator dump consequence for the Tank Farm Safety Analysis Report (FSAR). Evaporator Dump scenario is developed and details and description of the analysis methods are provided.

  10. Calculation notes that support accident scenario and consequence of the evaporator dump

    SciTech Connect (OSTI)

    Crowe, R.D.

    1996-09-27

    The purpose of this calculation note is to provide the basis for evaporator dump consequence for the Tank Farm Safety Analysis Report (FSAR). Evaporator Dump scenario is developed and details and description of the analysis methods are provided.

  11. Calculation notes that support accident scenario and consequence determination of a waste tank criticality

    SciTech Connect (OSTI)

    Crowe, R.D.

    1996-09-27

    The purpose of this calculation note is to provide the basis for criticality consequences for the Tank Farm Safety Analysis Report (FSAR). Criticality scenario is developed and details and description of the analysis methods are provided.

  12. Research Notes and Information References

    Energy Science and Technology Software Center (OSTI)

    1994-12-01

    The RNS (Research Notes System) is a set of programs and databases designed to aid the research worker in gathering, maintaining, and using notes taken from the literature. The sources for the notes can be books, journal articles, reports, private conversations, conference papers, audiovisuals, etc. The system ties the databases together in a relational structure, thus eliminating data redundancy while providing full access to all the information. The programs provide the means for access andmore » data entry in a way that reduces the key-entry burden for the user. Each note has several data fields. Included are the text of the note, the subject classification (for retrieval), and the reference identification data. These data are divided into four databases: Document data - title, author, publisher, etc., fields to identify the article within the document; Note data - text and page of the note; Sublect data - subject categories to ensure uniform spelling for searches. Additionally, there are subsidiary files used by the system, including database index and temporary work files. The system provides multiple access routes to the notes, both structurally (access method) and topically (through cross-indexing). Output may be directed to a printer or saved as a file for input to word processing software.« less

  13. STEP Intern Job Description

    Broader source: Energy.gov [DOE]

    STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  14. OpenEI Community - notes

    Open Energy Info (EERE)

    more

    http:en.openei.orgcommunityblognotes-callcomments notes Linked Open Data Workshop in Washington, D.C. Fri, 28 Sep 2012 00:57:30 +0000 Jweers 521 at...

  15. GETEM Manuals and Revision Notes

    Broader source: Energy.gov [DOE]

    Please refer to these manuals and revision notes prior to downloading and running the Geothermal Electricity Technology Evaluation Model (GETEM). Because this is a beta version, you are urged to...

  16. Research Project Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    No job description found Current Research Opportunities Water Quality Standards and Feasibility Studies National Permit Discharge Elimination System Permitting Physiologically...

  17. AIRMaster+ Release Notes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AIRMaster+ (Version 1.2.7) Release Notes PDF icon Release Notes (Version 1.2.7) More Documents & Publications AIRMaster+ Software Tool Brochure AIRMaster+ User Manual AIRMaster+ ...

  18. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    "Weekly Imports Report". EIA Forms & Instructions . Explanatory Notes and Detailed Methods Report . Explanatory Notes Preliminary data collected weekly. See U.S. Imports by...

  19. Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    these lectures will be provided via RealPlayer. Users of Windows- or Macintosh-based computers will be able to see and hear the presentation by way of the following procedures. 1....

  20. Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accomodations at Argonne The Argonne contact person for the NUG Meeting is Mike Minkoff of the Mathematics and Computer Science Division. His phone number is (630) 252-7234. Last ...

  1. Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a primary topic of discussion was the issue of the processing capabilities of the PVP cluster. Since the upgrade of the batch system processors to SV1s, some concern has been...

  2. HAZWOPER Training Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    55 Revision 0 Hanford Standardized HAZWOPER Training Program Description Prepared for the U.S. Department of Energy Assistant Secretary for Environmental Management Approved for Public Release; Further Dissemination Unlimited Hanford Standardized HAZWOPER Training Program Description, DOE-0355 Page 2 of 12 Senior Management Team Approval Hanford Standardized HAZWOPER Training Program Description, DOE-0355 Page 3 of 12 Hanford Training Manager Approval Hanford Standardized HAZWOPER Training

  3. ARM - Detailed Experiment Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Sets Weather Summary (pdf, 6M) New York Workshop Presentations Experiment Planning TWP-ICE Proposal Abstract Detailed Experiment Description Science Plan (pdf, 1M)...

  4. Chemical Sciences Project Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Simulation for the Chemical Sciences Project Description Almos every scientific activity at Los Alamos involves data analysis and modeling. From a chemical sciences point of ...

  5. VISION Model: Description

    SciTech Connect (OSTI)

    2009-01-18

    Description of VISION model, which is used to estimate the impact of highway vehicle technologies and fuels on energy use and carbon emissions to 2050.

  6. Detailed Income Statement Descriptions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Program Description Sales Sales under the Transmission Rate Schedules Miscellaneous Revenue Sales that are not subject to Transmission rates schedules Inter-Business Unit...

  7. Tank Waste Remediation System (TWRS) Technical Baseline Summary Description

    SciTech Connect (OSTI)

    TEDESCHI, A.R.

    2000-04-21

    This revision notes the supersedure of the subject document by concurrent issuance of HNF-1901 ''Technical Baseline Summary Description for the Tank Farm Contractor'', Revision 2. Safe storage mission technical baseline information was absorbed by the new revision of HNF-1901.

  8. Lecture Notes - Summer 2016 Cyclotron Institute REU Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REU Lecture Notes (links to notes will be provided when they become available) -->

  9. Lecture notes for criticality safety

    SciTech Connect (OSTI)

    Fullwood, R.

    1992-03-01

    These lecture notes for criticality safety are prepared for the training of Department of Energy supervisory, project management, and administrative staff. Technical training and basic mathematics are assumed. The notes are designed for a two-day course, taught by two lecturers. Video tapes may be used at the options of the instructors. The notes provide all the materials that are necessary but outside reading will assist in the fullest understanding. The course begins with a nuclear physics overview. The reader is led from the macroscopic world into the microscopic world of atoms and the elementary particles that constitute atoms. The particles, their masses and sizes and properties associated with radioactive decay and fission are introduced along with Einstein's mass-energy equivalence. Radioactive decay, nuclear reactions, radiation penetration, shielding and health-effects are discussed to understand protection in case of a criticality accident. Fission, the fission products, particles and energy released are presented to appreciate the dangers of criticality. Nuclear cross sections are introduced to understand the effectiveness of slow neutrons to produce fission. Chain reactors are presented as an economy; effective use of the neutrons from fission leads to more fission resulting in a power reactor or a criticality excursion. The six-factor formula is presented for managing the neutron budget. This leads to concepts of material and geometric buckling which are used in simple calculations to assure safety from criticality. Experimental measurements and computer code calculations of criticality are discussed. To emphasize the reality, historical criticality accidents are presented in a table with major ones discussed to provide lessons-learned. Finally, standards, NRC guides and regulations, and DOE orders relating to criticality protection are presented.

  10. B Plant facility description

    SciTech Connect (OSTI)

    Chalk, S.E.

    1996-10-04

    Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

  11. Meeting Summary Notes | Department of Energy

    Office of Environmental Management (EM)

    Department of Energy Notes re NOI for Convention on Supplementary Compensation Meeting Notes re NOI for Convention on Supplementary Compensation notes from meeting on Convention on Supplementary Compensation PDF icon Meeting Notes re NOI for Convention on Supplementary Compensation More Documents & Publications Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation Public comment re Convention on Supplementary Compensation on Nuclear Damage Contingent Cost

  12. EM QA Working Group September 2011 Notes

    Broader source: Energy.gov [DOE]

    Meeting minutes and notes from the EM QA Working Group video conference meeting held in September 2011.

  13. BIA Description | Open Energy Information

    Open Energy Info (EERE)

    Description Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: BIA Description Abstract Description of Bureau of Indian Affairs. Author Bureau of Indian...

  14. Description of GPRA08 scenarios

    SciTech Connect (OSTI)

    None, None

    2009-01-18

    Background information for the FY 2007 GPRA methodology review providing a description of GPRA08 scenarios.

  15. EM QA Working Group September 2011 Notes

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    suspectcounterfeit items, software QA, and corrective actions? Bob also noted that we need to be diligent in the understanding and use of the metrics to avoid potential issues ...

  16. Property:ExplorationNotes | Open Energy Information

    Open Energy Info (EERE)

    the property "ExplorationNotes" Showing 1 page using this property. R RAPIDOverviewGeothermalExplorationCalifornia + The Geothermal Resources Prospecting Permit (PRC...

  17. Description of Proposed Action

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RECORD OF CATEGORICAL EXCLUSION DETERMINATION 1 Description of Proposed Action Performance of a three-dimensional seismic survey line on approximately 2,409 acres contained within the WIPP Land Withdrawal Area as part of a larger survey to determine whether hydrocarbons are present in the region in quantities that warrant extraction and development. Number and Title of Applicable Categorical Exclusion B3.1 Site Characterization/Environmental Monitoring Activities covered by this Categorical

  18. Management control system description

    SciTech Connect (OSTI)

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  19. TWRS baseline system description

    SciTech Connect (OSTI)

    Lee, A.K.

    1995-03-28

    This document provides a description of the baseline system conceptualized for remediating the tank waste stored within the Hanford Site. Remediation of the tank waste will be performed by the Tank Waste Remediation System (TWRS). This baseline system description (BSD) document has been prepared to describe the current planning basis for the TWRS for accomplishing the tank waste remediation functions. The BSD document is not intended to prescribe firm program management strategies for implementing the TWRS. The scope of the TWRS Program includes managing existing facilities, developing technology for new systems; building, testing and operating new facilities; and maintaining the system. The TWRS Program will manage the system used for receiving, safely storing, maintaining, treating, and disposing onsite, or packaging for offsite disposal, all tank waste. The scope of the TWRS Program encompasses existing facilities such as waste storage tanks, evaporators, pipelines, and low-level radioactive waste treatment and disposal facilities. It includes support facilities that comprise the total TWRS infrastructure, including upgrades to existing facilities or equipment and the addition of new facilities.

  20. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    For details, see Technical Note 3 in the Fuel Oil and Kerosene Sales report. All Other Sales for all other energy-consuming sectors not included elsewhere. Commercial An ...

  1. Manhattan Project: A Note on Sources

    Office of Scientific and Technical Information (OSTI)

    A NOTE ON SOURCES Resources > Note on Sources The text for this web site is a combination of original material and adaptations from previous publications of the Department of Energy (including contractors), its predecessor agencies (primarily the Atomic Energy Commission and the Manhattan Engineer District), and other government agencies. Adaptations run the gamut from summaries to close paraphrases to text being taken directly. This material was gathered and adapted for use by the DOE's

  2. YUCCA MOUNTAIN SITE DESCRIPTION

    SciTech Connect (OSTI)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  3. Program Description | Robotics Internship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 4, 2016. Apply Now for the Robotics Internship About the Internship Program Description Start of Appointment Renewal of Appointment End of Appointment Stipend Information...

  4. Calculation notes that support accident scenario and consequence of the in-tank fuel fire/deflageration

    SciTech Connect (OSTI)

    Crowe, R.D., Westinghouse Hanford

    1996-09-09

    The purpose of this calculation note is to provide the basis for In-Tank Fuel fire/Deflageration consequence for the Tank Farm Safety Analysis Report (FSAR). Tank Fuel Fire/Deflageration scenario is developed and details and description of the analysis methods are provided.

  5. Calculation notes that support accident scenario and consequence of the in-tank fuel fire/deflagration

    SciTech Connect (OSTI)

    Crowe, R.D.

    1996-09-27

    The purpose of this calculation note is to provide the basis for In-Tank Fuel Fire/Deflageration consequence for the Tank Farm Safety Analysis Report (FSAR). Tank Fuel Fire/Deflageration scenario is developed and details and description of the analysis methods are provided.

  6. Federal Utility Partnership Working Group Meeting Notes | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Meeting Notes Federal Utility Partnership Working Group Meeting Notes PDF icon Spring 2013 ... FUPWG Spring 2013 Report and Presentations Federal Utility Partnership Working Group ...

  7. PIA - Savannah River Operations Office Lotus Domino/Notes System...

    Broader source: Energy.gov (indexed) [DOE]

    Lotus DominoNotes System PDF icon PIA - Savannah River Operations Office Lotus DominoNotes System More Documents & Publications PIA - DOE Savannah River Operations Office PRISM ...

  8. RAP Meeting Transcribed Flip Chart Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Flip Chart Notes February 15, 2012 Site-wide Permit Workshop May 3 1. Have "post-workshop" session to discuss HAB next steps 2. Recommend Ecology sponsors & facilitates Workshop - Ecology captures notes, but HAB members track issues of concern, too. 3. Web-ex for public when it fits 4. Pre-workshop meeting with HAB issue leaders (potential speakers) Page 1 300 Area HAB next steps... IM & Pam 1. Issue managers meet to review potential issues for HAB/committees 2. Bring back to

  9. Application Note: Power Grid Modeling With Xyce.

    SciTech Connect (OSTI)

    Sholander, Peter E.

    2015-06-01

    This application note describes how to model steady-state power flows and transient events in electric power grids with the SPICE-compatible Xyce TM Parallel Electronic Simulator developed at Sandia National Labs. This application notes provides a brief tutorial on the basic devices (branches, bus shunts, transformers and generators) found in power grids. The focus is on the features supported and assumptions made by the Xyce models for power grid elements. It then provides a detailed explanation, including working Xyce netlists, for simulating some simple power grid examples such as the IEEE 14-bus test case.

  10. Xyce parallel electronic simulator release notes.

    SciTech Connect (OSTI)

    Keiter, Eric Richard; Hoekstra, Robert John; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Thornquist, Heidi K.; Rankin, Eric Lamont; Coffey, Todd Stirling; Pawlowski, Roger Patrick; Santarelli, Keith R.

    2010-05-01

    The Xyce Parallel Electronic Simulator has been written to support, in a rigorous manner, the simulation needs of the Sandia National Laboratories electrical designers. Specific requirements include, among others, the ability to solve extremely large circuit problems by supporting large-scale parallel computing platforms, improved numerical performance and object-oriented code design and implementation. The Xyce release notes describe: Hardware and software requirements New features and enhancements Any defects fixed since the last release Current known defects and defect workarounds For up-to-date information not available at the time these notes were produced, please visit the Xyce web page at http://www.cs.sandia.gov/xyce.

  11. Hanford Solar Power: Cost Effective and Mobile

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – EM’s Richland Operations Office (RL) has tasked contractor Mission Support Alliance (MSA) with improving sustainable energy usage on the Hanford site.

  12. Notes on beam dynamics in linear accelerators

    SciTech Connect (OSTI)

    Gluckstern, R.L.

    1980-09-01

    A collection of notes, on various aspects of beam dynamics in linear accelerators, which were produced by the author during five years (1975 to 1980) of consultation for the LASL Accelerator Technology (AT) Division and Medium-Energy Physics (MP) Division is presented.

  13. The MicroBooNE Experiment - Public Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MicroBooNE Public Notes Page Back to the Publications Page

  14. LLW notes. Volume 11, No.8

    SciTech Connect (OSTI)

    1996-12-01

    `LLW Notes` is distributed by Afton Associates, Inc. to Low-Level Radioactive Waste Forum Participants and other state, and compact officials identified by those Participants to receive `LLW Notes`. The Low-Level Radioactive Waste Forum (LLW Forum) is an association of state and compact representatives, appointed by governors and compact commissions, established to facilitate state and compact implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The LLW Forum provides an opportunity for state and compact officials to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  15. LLW notes, Vol. 11, No. 2

    SciTech Connect (OSTI)

    1996-03-01

    `LLW Notes` is distributed by Afton Associates, Inc. to Low-Level Radioactive Waste Forum Participants and other state, and compact officials identified by those Participants to receive LLW Notes. The Low-Level Radioactive Waste Forum (LLW Forum) is an association of state and compact representatives, appointed by governors and compact commissions, established to facilitate state and compact implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The LLW Forum provides an opportunity for state and compact officials to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  16. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Spot Prices (Crude Oil in Dollars per Barrel, Products in Dollars per Gallon) Period: Daily Weekly Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Product by Area 05/02/16 05/03/16 05/04/16 05/05/16 05/06/16 05/09/16 View History Crude Oil WTI - Cushing, Oklahoma 44.75 43.65 43.77 44.33 44.58 43.45 1986-2016 Brent - Europe 45.82 43.09 43.08 44.39 44.60 42.43 1987-2016 Conventional Gasoline New York Harbor, Regular

  17. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Shale Gas Production Definitions Key Terms Definition Shale Gas Natural gas produced from organic (black) shale formations. For definitions of related energy terms, refer to the EIA Energy Glossary. Sources Energy Information Administration, Office of Oil and Gas Explanatory Notes Shale Gas production data collected in conjunction with proved reserves data on Form EIA-23 are unofficial. Official Shale Gas production data from Form EIA-895 can be found in Natural Gas Gross Withdrawals and

  18. labNotes | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LabNotes March 2016 Three NETL Science and Engineering Ambassadors to Participate in Spring Course Three NETL employees, Ale Hakala, Paul Ohodnicki, and Steven Bossart will participate as Science and Engineering Ambassadors for the 2016 spring semester course, "Energy: Science, Society and, Communication," presented by Carnegie Mellon University (CMU) and the University of Pittsburgh (Pitt) as part of the Science and Engineering Ambassadors program, developed by the National Academies

  19. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Other Products Definitions Key Terms Definition Aviation Gasoline A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Gas Plant Operator Any firm, including a gas plant owner, which

  20. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Petroleum Product Prices by Sales Type Definitions Key Terms Definition Aviation Gasoline (Finished) A complex mixture of relatively volatile hydrocarbons with or without small quantities of additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572. Note: Data on blending components are not counted in data on finished aviation gasoline. Gas Plant Operator Any firm,

  1. HSEP Committee Meeting - Transcribed Flipchart Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Flipchart Notes August 8, 2013 Safety Culture Next Steps 1. Continue to get periodic briefings from SCIPT - progress on action items, contractor engagement, etc. 2. Get update on HSS review Page 1 DS Tanks/Flammable Gas - Next Steps 1. Update after DOE report on tank flow rate monitoring is available (Jan/Feb) 2. Tom w/follow up with concerns about pressurization alarms Page 2 Emergency Preparedness/Response: Input - Strategies for Awareness 1. Use real examples when trying to increase

  2. Favorable conditions noted for Australia shale oil

    SciTech Connect (OSTI)

    Not Available

    1986-09-01

    After brief descriptions of the Rundle, Condor, and Stuart/Kerosene Creek oil shale projects in Queensland, the competitive advantages of oil shale development and the state and federal governments' attitudes towards an oil shale industry in Australia are discussed. It is concluded that Australia is the ideal country in which to start an oil shale industry.

  3. Detailed Course Module Description | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Detailed Course Module Description Detailed Course Module Description This document lists the course modules for building science courses offered at Cornell's Collaborator...

  4. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  5. eNews Note of Appreciation

    National Nuclear Security Administration (NNSA)

    3 Issue 25 ASC eNews Quarterly Newsletter September 2013 A Note of Appreciation Reeta Garber The ASC Program would like to recognize Reeta Garber for her leadership in designing and developing programmatic communications tools and activities and to wish her the very best as she retires (again) to begin a new phase in her life. Since 1998 Reeta has supported the ASC Program as an important member of the core team responsible for spreading the word about DOE/NNSA laboratory and Federal efforts in

  6. Quality Assurance Requirements and Description

    Energy Savers [EERE]

    QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160

  7. Meeting Notes re NOI for Convention on Supplementary Compensation |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Notes re NOI for Convention on Supplementary Compensation Meeting Notes re NOI for Convention on Supplementary Compensation notes from meeting on Convention on Supplementary Compensation PDF icon Meeting Notes re NOI for Convention on Supplementary Compensation More Documents & Publications Convention on Supplementary Compensation for Nuclear Damage Contingent Cost Allocation Public comment re Convention on Supplementary Compensation on Nuclear Damage Contingent Cost

  8. Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Evaluation Josh Warner, Manager Contract Administration Mike Rose, Manager Smart GridDemand Response Lee Hall, Manager Programs Brent Barclay, Manager IndustrialAg Sector...

  9. Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    challenging training environment Modeled after real-world events and scenarios Forces teams to push the boundaries of their comfort level with their tools and...

  10. Visiting Faculty Program Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visiting Faculty Program Program Description The Visiting Faculty Program seeks to increase the research competitiveness of faculty members and their students at institutions historically underrepresented in the research community in order to expand the workforce vital to Department of Energy mission areas. As part of the program, selected university/college faculty members collaborate with DOE laboratory research staff on a research project of mutual interest. Program Objective The program is

  11. PURPOSE FORM INSTRUCTIONS Item Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PURPOSE FORM INSTRUCTIONS Item Description 1 Enter inclusive dates of current reporting period. 2 Enter the official contract title. 3 Enter the official contract number. 4 Enter the name and address of each subcontractor. Subcontractors are to be grouped by state. 5 Enter ZIP code plus the 4-digit ZIP code extension. 6 Enter the subcontractor's business type (i.e. Academia, Industry, National Lab, Non-Profit Organization, State, or Other). 7 Enter the subcontractor's business classification

  12. Nuclear Industry Job Descriptions Boilermaker

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Incident Team NNSA houses the Nuclear Incident Team (NIT), which is responsible for deploying assets at the request of coordinating agencies in response to a nuclear or radiological incident. The NIT's mission is to coordinate NNSA assets for deployment, continually monitor deployment activities, and provide situational awareness of activities to NNSA management. The NIT is staffed and fully operational within two hours of notification

    Industry Job Descriptions Boilermaker Skilled craft who

  13. Student Internship Programs Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Student Internship Programs Program Description The objective of the Laboratory's student internship programs is to provide students with opportunities for meaningful hands- on experience supporting educational progress in their selected scientific or professional fields. The most significant impact of these internship experiences is observed in the intellectual growth experienced by the participants. Student interns are able to appreciate the practical value of their education efforts in their

  14. BNL ALARA Center: ALARA Notes, No. 9

    SciTech Connect (OSTI)

    Khan, T.A.; Xie, J.W.; Beckman, M.C.

    1994-02-01

    This issue of the Brookhaven National Laboratory`s Alara Notes includes the agenda for the Third International Workshop on ALARA and specific instructions on the use of the on-line fax-on-demand service provided by BNL. Other topics included in this issue are: (1) A discussion of low-level discharges from Canadian nuclear plants, (2) Safety issues at French nuclear plants, (3) Acoustic emission as a means of leak detection, (4) Replacement of steam generators at Doel-3, Beaznau, and North Anna-1, (5) Remote handling equipment at Bruce, (6) EPRI`s low level waste program, (7) Radiation protection during concrete repairs at Savannah River, (8) Reactor vessel stud removal/repair at Comanche Peak-1, (9) Rework of reactor coolant pump motors, (10) Restoration of service water at North Anna-1 and -2, (11) Steam generator tubing problems at Mihama-1, (12) Full system decontamination at Indian Point-2, (13) Chemical decontamination at Browns Ferry-2, and (14) Inspection methodolody in France and Japan.

  15. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of procedures that will be used to operate the system.

  16. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  17. Descriptive Model of Generic WAMS

    SciTech Connect (OSTI)

    Hauer, John F.; DeSteese, John G.

    2007-06-01

    The Department of Energys (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nations electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

  18. Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use Calibri, 12 point font for this memorandum.) (Effective...

  19. DOE Durability Working Group October 2011 Meeting Notes

    Broader source: Energy.gov [DOE]

    Meeting notes from the Fall 2011 Durability Working Group (DWG) Meeting sponsored by the U.S. Department of Energy (DOE) Fuel Cell Technologies Program. Notes also include a summary of progress on action items from the Spring 2011 DWG meeting.

  20. Microsoft Word - 338M_Geothermal_Project_Descriptions | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    338MGeothermalProjectDescriptions Microsoft Word - 338MGeothermalProjectDescriptions PDF icon Microsoft Word - 338MGeothermalProjectDescriptions More Documents & ...

  1. ASP Program Description | Department of Energy

    Energy Savers [EERE]

    ASP Program Description ASP Program Description This program description provides an overview of the Analytical Services Program (ASP) activities for the United States (U.S.) Department of Energy (DOE or Department), including the National Nuclear Security Administration (NNSA). The Office of Environment, Health, Safety and Security (AU), Office of Sustainable Environmental Stewardship, manages the ASP, which is composed three elements: U.S. Department of Energy Consolidated Audit Program, Mixed

  2. Postdoctoral Program Program Description The Postdoctoral (Postdoc...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Postdoctoral Program Program Description The Postdoctoral (Postdoc) Research program offers the opportunity for appointees to perform research in a robust scientific R&D...

  3. Investigation and Analytical Description of Acoustic Production...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Investigation and Analytical Description of Acoustic Production by Magneto-Acoustic Mixing Technology Citation Details In-Document Search This content will become...

  4. Slice Product Description (contracts/slice)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    meeting on March 4, 1999, to discuss the Slice Product Description and to receive oral comments. This report summarizes the issues raised in written and oral comments...

  5. PLEASE NOTE THURSDAY DATE - COLLOQUIUM: Professor Ralph Roskies...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 23, 2013, 4:15pm to 5:30pm Colloquia MBG Auditorium PLEASE NOTE THURSDAY DATE - COLLOQUIUM: Professor Ralph Roskies - "Big Data at the Pittsburgh Supercomputing Center" ...

  6. Notes on the Lumped Backward Master Equation for the Neutron...

    Office of Scientific and Technical Information (OSTI)

    with a knowledge of low order statistical averages (variance, correlation), provides an incomplete and very unsatisfactory description of the state of the neutron population. ...

  7. Notes on Newton-Krylov based Incompressible Flow Projection Solver

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Notes on Newton-Krylov based Incompressible Flow Projection Solver Citation Details In-Document Search Title: Notes on Newton-Krylov based Incompressible Flow Projection Solver The purpose of the present document is to formulate Jacobian-free Newton-Krylov algorithm for approximate projection method used in Hydra-TH code. Hydra-TH is developed by Los Alamos National Laboratory (LANL) under the auspices of the Consortium for Advanced Simulation of

  8. Notes on Newton-Krylov based Incompressible Flow Projection Solver

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Notes on Newton-Krylov based Incompressible Flow Projection Solver Citation Details In-Document Search Title: Notes on Newton-Krylov based Incompressible Flow Projection Solver × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science

  9. Notes on the Lumped Backward Master Equation for the Neutron

    Office of Scientific and Technical Information (OSTI)

    Extinction/Survival Probability (Technical Report) | SciTech Connect Technical Report: Notes on the Lumped Backward Master Equation for the Neutron Extinction/Survival Probability Citation Details In-Document Search Title: Notes on the Lumped Backward Master Equation for the Neutron Extinction/Survival Probability The expected or mean neutron number (or density) provides an adequate characterization of the neutron population and its dynamical excursions in most neutronic applications, in

  10. Publisher's Note: Measurement of the Positive Muon Lifetime and

    Office of Scientific and Technical Information (OSTI)

    Determination of the Fermi Constant to Part-per-Million Precision [Phys. Rev. Lett. 106, 041803 (2011)] (Journal Article) | SciTech Connect Publisher's Note: Measurement of the Positive Muon Lifetime and Determination of the Fermi Constant to Part-per-Million Precision [Phys. Rev. Lett. 106, 041803 (2011)] Citation Details In-Document Search Title: Publisher's Note: Measurement of the Positive Muon Lifetime and Determination of the Fermi Constant to Part-per-Million Precision [Phys. Rev.

  11. MediaWiki:Mainpage-description | Open Energy Information

    Open Energy Info (EERE)

    Mainpage-description Jump to: navigation, search Main page Retrieved from "http:en.openei.orgwikiMediaWiki:Mainpage-description...

  12. U.S. Department of Energy Onboard Storage Tank Workshop Notes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Onboard Storage Tank Workshop Notes U.S. Department of Energy Onboard Storage Tank Workshop Notes These notes and action items were derived from the Onboard Storage Tank Workshop ...

  13. CHP R&D Project Descriptions

    Broader source: Energy.gov [DOE]

    The CHP R&D project portfolio includes advanced reciprocating engine systems (ARES), packaged CHP systems, high-value applications, fuel-flexible CHP, and demonstrations of these technologies. Project fact sheets and short project descriptions are provided below:

  14. Date Time Event Description/Participants Location

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Updated: 06112015 Date Time Event DescriptionParticipants Location Point of Contact 11 thru 12 All Day Meeting Todd Allen, deputy director of Science and Technology at INL, has...

  15. Description of Energy Intensity Tables (12)

    U.S. Energy Information Administration (EIA) Indexed Site

    3. Description of Energy Intensity Data Tables There are 12 data tables used as references for this report. Specifically, these tables are categorized as tables 1 and 2 present...

  16. Detailed Course Module Description | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Detailed Course Module Description Detailed Course Module Description This document lists the course modules for building science courses offered at Cornell's Collaborator Sustainable Buildingi Practice course. PDF icon course_module.pdf More Documents & Publications Building America Building Science Education Roadmap Building America Program Research-to-Market Plan Opportunities for Building America Research to Address Energy Upgrade Technical Challenges: HVAC, Envelope and IAQ (301)

  17. Microsoft Word - HQ ISM System Description Final

    National Nuclear Security Administration (NNSA)

    NA-1 SD 450.4-1 Approved: 10-23-07 National Nuclear Security Administration Headquarters Integrated Safety Management System Description This NNSA Headquarters Integrated Safety Management System Description describes the NNSA Headquarters role in establishing expectations and accomplishing work in a safe and environmentally sound manner to successfully execute the NNSA mission and strategic goals. NNSA senior managers strongly support and are personally committed to implementation of the policy

  18. Course Descriptions - Combustion Energy Frontier Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lecture Videos News, Events & Publications Contact CEFRC CEFRC In Pictures CEFRC Intranet (Members Only) Home » 2016 Combustion Summer School » Course Descriptions Course Descriptions Combustion Dynamics Lecturer: Prof. Sébastien M. Candel, École Centrale Paris Course Length: 15 hours (Mon - Fri) Session: Morning Session Objective: This course provides an introduction to the analysis of combustion dynamics problems. It includes a tutorial on acoustics and on early combustion instability

  19. Tribal Consultation and Stakeholder Outreach Meeting Notes and Analysis

    Energy Savers [EERE]

    Strategy on the Arctic Region (NSAR) - Ten Year Renewable Energy Strategy Tribal Consultation and Stakeholder Outreach Meeting Notes and Analysis Prepared by Denali Daniels and Associates, Inc. Fall 2014 Office of Indian Energy Table o f C ontents Executive S ummary .............................................................................................................................................. 2 --- 6 Background

  20. Nuclear Waste Partnership (NWP) Quality Assurance Program Description...

    Office of Environmental Management (EM)

    Waste Partnership (NWP) Quality Assurance Program Description (QAPD) Nuclear Waste Partnership (NWP) Quality Assurance Program Description (QAPD) The documents included in this...

  1. CleanEnergyProjectsonTribalLands_Project_Descriptions_072011...

    Broader source: Energy.gov (indexed) [DOE]

    CleanEnergyProjectsonTribalLandsProjectDescriptions072011.pdf More Documents & Publications CleanEnergyProjectsonTribalLandsProjectDescriptions072011.pdf...

  2. Microsoft Word - 564M_Biomass_Project Descriptions FINAL 120409...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 PDF icon Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 More Documents & Publications ...

  3. Microscopic Description of Nuclear Fission: Fission Barrier Heights...

    Office of Scientific and Technical Information (OSTI)

    Microscopic Description of Nuclear Fission: Fission Barrier Heights of Even-Even Actinides Citation Details In-Document Search Title: Microscopic Description of Nuclear Fission: ...

  4. Unified Description of Nambu-Goldstone Bosons without Lorentz...

    Office of Scientific and Technical Information (OSTI)

    Unified Description of Nambu-Goldstone Bosons without Lorentz Invariance Citation Details In-Document Search Title: Unified Description of Nambu-Goldstone Bosons without Lorentz ...

  5. Description of induced nuclear fission with Skyrme energy functionals...

    Office of Scientific and Technical Information (OSTI)

    Description of induced nuclear fission with Skyrme energy functionals: Static potential ... Citation Details In-Document Search Title: Description of induced nuclear fission with ...

  6. Microscopic Description of Nuclear Fission: Fission Barrier Heights...

    Office of Scientific and Technical Information (OSTI)

    Conference: Microscopic Description of Nuclear Fission: Fission Barrier Heights of Even-Even Actinides Citation Details In-Document Search Title: Microscopic Description of Nuclear ...

  7. Description of Induced Nuclear Fission with Skyrme Energy Functionals...

    Office of Scientific and Technical Information (OSTI)

    Description of Induced Nuclear Fission with Skyrme Energy Functionals: II. Finite Temperature Effects Citation Details In-Document Search Title: Description of Induced Nuclear ...

  8. Integrated Program Management Report (IPMR) Data Item Description...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Program Management Report (IPMR) Data Item Description (DID) Integrated Program Management Report (IPMR) Data Item Description (DID) Integrated Program Management Report...

  9. SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect (OSTI)

    M.M. Ansari

    2005-04-05

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

  10. Paducah Site Description | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Background » Paducah Site Description Paducah Site Description The 3,556-acre Paducah Site is located in western Kentucky The 3,556-acre Paducah Site is located in western Kentucky Paducah state Map The Paducah Gaseous Diffusion (PGDP) Site is located in McCracken County, Kentucky, 10 miles west of the city of Paducah. The plant is located on a 3,556-acre DOE site, of which approximately 750 acres are within the fenced security area. The PGDP footprint has more than 500 facilities, 19 miles of

  11. LLW Notes, Volume 9, Number 6. October 1994

    SciTech Connect (OSTI)

    1994-10-01

    LLW Notes is distributed to Low-Level Radioactive Waste Forum Participants and other state and compact officials identified by those Participants to receive LLW Notes. The Low-Level Radioactive Waste Forum is an association of state and compact representatives appointed by governors and compact commissions, established to facilitate state and compact commission implementation of the Low- Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The Forum provides an opportunity for states and compacts to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  12. NOTES AND COMMENTS REVERE COPPER AR! BRASS DETROIT, MICHIGAN

    Office of Legacy Management (LM)

    * .t-* . * * - -. _ _ ,.. .I AIT. 4 NOTES AND COMMENTS REVERE COPPER AR! BRASS DETROIT, MICHIGAN A preliminary (screening) survey was conducted in several areas of the Revere Copper and Brass Facility, 5851 W. Jefferson Street, Detroit, Michigan. The survey was conducted by the ANL Radiological Survey Group on April 22, 1981. The Survey Group, consisting of W. Smith, R. Mundis, K. Flynn (all of ANI), and E. Jascewsky (DOE-CH) met on site with J. Evans (Safety Engineer), D. Tratt (Asst.

  13. EIA - Greenhouse Gas Emissions - Table-Figure Notes and Sources

    Gasoline and Diesel Fuel Update (EIA)

    A1. Notes and Sources Tables Chapter 1: Greenhouse gas emissions overview Table 1. U.S. emissions of greenhouse gases, based on global warming potential, 1990-2009: Sources: Emissions: EIA estimates. Data in this table are revised from the data contained in the previous EIA report, Emissions of Greenhouse Gases in the United States 2008, DOE/EIA-0573(2008) (Washington, DC, December 2009). Global warming potentials: Intergovernmental Panel on Climate Change, Climate Change 2007: The Physical

  14. NETL LabNotes | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NETL LabNotes Archive SEPTEMBER 2014 Advanced Manufacturing Builds a Better Fuel Cell AUGUST 2014 Researchers Use Waste Slag to Create Energy and Cut Emissions JULY 2014 Corrosion Testing using Oxy-Fuel Combustion for Ultra-Supercritical Steam Boilers NETL's Corrosion Erosion Facility Tests Materials in Severe Environments JUNE 2014 Deepwater Oil Production through Thick and Thin May 2014 NETL-Boston Scientific Coronary Stent Alloy Applications Expand Surface Science: Cleaning up Syngas to Reach

  15. Application note : using open source schematic capture tools with Xyce.

    SciTech Connect (OSTI)

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  16. Microsoft Word - Final TEC Notes_April 2005.doc

    Office of Environmental Management (EM)

    S. DEPARTMENT OF ENERGY (D0E) TRANSPORTATION EXTERNAL COORDINATION WORKING GROUP (TEC) MEETING April 4-5, 2005 Phoenix, Arizona Meeting Notes Part I - Opening Remarks (April 4) Welcome and Meeting Overview Introduction Judith Holm, DOE Office of National Transportation (ONT), Office of Civilian Radioactive Waste Management (OCRWM), called the meeting to order and welcomed the participants. She reviewed the agenda and called special attention to the plenary sessions being held in the afternoon.

  17. Company's cogeneration effort conserves fuel, cuts power costs

    SciTech Connect (OSTI)

    Kingston, W.J.

    1983-05-01

    Kodak Park is Eastman Kodak Company's largest manufacturing complex. As temperatures drop here, steam - created as a by-product in producing electricity - will heat some 200 buildings.

  18. Backup Power Cost of Ownership Analysis and Incumbent Technology Comparison

    SciTech Connect (OSTI)

    Kurtz, J.; Saur, G.; Sprik, S.; Ainscough, C.

    2014-09-01

    This cost of ownership analysis identifies the factors impacting the value proposition for fuel cell backup power and presents the estimated annualized cost of ownership for fuel cell backup power systems compared with the incumbent technologies of battery and diesel generator systems. The analysis compares three different backup power technologies (diesel, battery, and fuel cell) operating in similar circumstances in four run time scenarios (8, 52, 72, and 176 hours).

  19. Backup Power Cost of Ownership Analysis and Incumbent Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Special thanks to Sprint, ReliOn, Altergy, Cummins Generator, Deka Batteries, AC Systems, ... K.; Judd, K.; Stone, H.; Zewatsky, J.; Thomas, A.; Mahy, H.; Paul, D. Identification ...

  20. Business risks to utilities as new nuclear power costs escalate

    SciTech Connect (OSTI)

    Severance, Craig A.

    2009-05-15

    A nuclear power megaproject carries with it severe business risks. Despite attempts to shift these risks to taxpayers and ratepayers, ultimately there are no guarantees for utility shareholders. Utility management needs to keep some core principles in mind. (author)

  1. Backup Power Cost of Ownership Analysis and Incumbent Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Validation Manufacturing Safety, Codes & Standards Education Market Transformation Systems Analysis Information Resources Financial Opportunities News Events Contact Us

  2. TWRS information locator database system design description

    SciTech Connect (OSTI)

    Knutson, B.J.

    1996-09-13

    This document gives an overview and description of the Tank Waste Remediation System (TWRS) Information Locator Database (ILD)system design. The TWRS ILD system is an inventory of information used in the TWRS Systems Engineering process to represent the TWRS Technical Baseline. The inventory is maintained in the form of a relational database developed in Paradox 4.5.

  3. Network architecture functional description and design

    SciTech Connect (OSTI)

    Stans, L.; Bencoe, M.; Brown, D.; Kelly, S.; Pierson, L.; Schaldach, C.

    1989-05-25

    This report provides a top level functional description and design for the development and implementation of the central network to support the next generation of SNL, Albuquerque supercomputer in a UNIX{reg sign} environment. It describes the network functions and provides an architecture and topology.

  4. Better Buildings Neighborhood Program Business Models Guide: Program Administrator Description

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program Business Models Guide: Program Administrator Business Models, Program Administrator Description.

  5. System Design Description PFP Thermal Stabilization

    SciTech Connect (OSTI)

    RISENMAY, H.R.

    2000-04-25

    The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures.

  6. Acquisition Description/ Category Solicitation Method Contract Type

    Energy Savers [EERE]

    13/2016 Acquisition Description/ Category Solicitation Method Contract Type Period of Performance Contract Value All EM Sites DOE-Wide commercial low-level waste treatment Energy Solutions, Inc. Perma-Fix Environmental Services, Inc. Philo-Technics, Ltd. Studsvik, Inc. Full and Open Competition Firm Fixed Price IDIQ 6/30/08-6/29/13 $450M Multiple award indefinite delivery/indefinite quality (IDIQ) Set-aside contracts for nationwide environmental services/ environmental cleanup Clauss

  7. Certificate in Environmental Monitoring Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certificate in Environmental Monitoring Program Description Since a primary goal of the Neighborhood Environmental Watch Network (NEWNET) project is to provide information to the public, it is fitting that there are appropriate education programs. NEWNET has collaborated with several local high schools and colleges by providing them with local NEWNET stations. Some teaching curricula include a study of radiation and detection, data acquisition and plotting, meteorology, or uses of computers.

  8. Machinist Pipeline/Apprentice Program Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Machinist Pipeline/Apprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled journeyworker machinists. It is based on a program developed by the National Institute for Metalworking Skills (NIMS) in conjunction with metalworking trade associations to develop and maintain a globally competitive U.S. workforce. The goal is to develop and implement apprenticeship programs that are aligned with

  9. COLLOQUIUM: NOTE SPECIAL DATE - THURSDAY: Unique Vulnerability of the New

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    York/New Jersey Metro Region to Hurricane Destruction - A New Perspective Based on Recent Research on Irene 2011 and Sandy 2012 | Princeton Plasma Physics Lab February 28, 2013, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: NOTE SPECIAL DATE - THURSDAY: Unique Vulnerability of the New York/New Jersey Metro Region to Hurricane Destruction - A New Perspective Based on Recent Research on Irene 2011 and Sandy 2012 Professor Nicholas K. Coch Queens College CUNY In the last two years. the

  10. Notes from Financial and Physical Oil Market Linkages

    Gasoline and Diesel Fuel Update (EIA)

    Notes from Financial and Physical Oil Market Linkages August 24, 2011 Session 1: 9:30 a.m. - 11:00 a.m. Paper Title: Does 'Paper Oil' Matter? Presenter: Michel Robe, American University Discussant: James Smith, Southern Methodist University Paper Abstract We construct a uniquely detailed, comprehensive dataset of trader positions in U.S. energy futures markets. We find considerable changes in the make-up of the open interest between 2000 and 2010 and show that these changes impact asset pricing.

  11. V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets V-147: IBM Lotus Notes Mail Client Lets Remote Users Execute Java Applets May 2, 2013 - 6:00am Addthis...

  12. V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting Attacks August ... Addthis Related Articles V-211: IBM iNotes Multiple Vulnerabilities U-198: IBM Lotus ...

  13. EnPI V4.0 Release Notes and Known Issues | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    notes and known issues for the Energy Performance Indicator (EnPI) Tool v4.0. PDF icon EnPI Release Notes and Known Issues More Documents & Publications EnPI V4.0 User Manual

  14. V-211: IBM iNotes Multiple Vulnerabilities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1: IBM iNotes Multiple Vulnerabilities V-211: IBM iNotes Multiple Vulnerabilities August 5, 2013 - 6:00am Addthis PROBLEM: Multiple vulnerabilities have been reported in IBM Lotus iNotes PLATFORM: IBM iNotes 9.x ABSTRACT: IBM iNotes has two cross-site scripting vulnerabilities and an ActiveX Integer overflow vulnerability REFERENCE LINKS: Secunia Advisory SA54436 IBM Security Bulletin 1645503 CVE-2013-3027 CVE-2013-3032 CVE-2013-3990 IMPACT ASSESSMENT: High DISCUSSION: 1) Certain input related

  15. V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attacks | Department of Energy 9: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting Attacks V-229: IBM Lotus iNotes Input Validation Flaws Permit Cross-Site Scripting Attacks August 28, 2013 - 6:00am Addthis PROBLEM: Several vulnerabilities were reported in IBM Lotus iNotes PLATFORM: IBM Lotus iNotes 8.5.x ABSTRACT: IBM Lotus iNotes 8.5.x contains four cross-site scripting vulnerabilities REFERENCE LINKS: Security Tracker Alert ID 1028954 IBM Security Bulletin 1647740

  16. Hamiltonian description of the ideal fluid

    SciTech Connect (OSTI)

    Morrison, P.J.

    1994-01-01

    Fluid mechanics is examined from a Hamiltonian perspective. The Hamiltonian point of view provides a unifying framework; by understanding the Hamiltonian perspective, one knows in advance (within bounds) what answers to expect and what kinds of procedures can be performed. The material is organized into five lectures, on the following topics: rudiments of few-degree-of-freedom Hamiltonian systems illustrated by passive advection in two-dimensional fluids; functional differentiation, two action principles of mechanics, and the action principle and canonical Hamiltonian description of the ideal fluid; noncanonical Hamiltonian dynamics with examples; tutorial on Lie groups and algebras, reduction-realization, and Clebsch variables; and stability and Hamiltonian systems.

  17. Tribal Energy Program February 2012 Award Project Descriptions | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Tribal Energy Program February 2012 Award Project Descriptions Tribal Energy Program February 2012 Award Project Descriptions Project descriptions of the 19 tribal energy projects selected for negotiation of award. PDF icon Tribal Energy Program Feb 2012 Awards Project Descriptions_0.pdf More Documents & Publications Community-Scale Project Development and Finance Workshop Agenda and Presentations: New Mexico 2012 Program Review Meeting Project Reports for Pueblo of Zia - 2012

  18. STEP Energy Coach and Technical Consultant Job Descriptions

    Broader source: Energy.gov [DOE]

    STEP Energy Coach and Technical Consultant Job Descriptions, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  19. COG Software Architecture Design Description Document

    SciTech Connect (OSTI)

    Buck, R M; Lent, E M

    2009-09-21

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  20. Description of Axial Detail for ROK Fuel

    SciTech Connect (OSTI)

    Trellue, Holly R; Galloway, Jack D

    2012-04-20

    For the purpose of NDA simulations of the ROK fuel assemblies, we have developed an axial burnup distribution to represent the pins themselves based on gamma scans of rods in the G23 assembly. For the purpose of modeling the G23 assembly (both at ORNL and LANL), the pin-by-pin burnup map as simulated by ROK is being assumed to represent the radial burnup distribution. However, both DA and NDA results indicate that this simulated estimate is not 100% correct. In particular, the burnup obtained from the axial gamma scan of 7 pins does not represent exactly the same 'average' pin burnup as the ROK simulation. Correction for this discrepancy is a goal of the well-characterized assembly task but will take time. For now, I have come up with a correlation for 26 axial points of the burnup as obtained by gamma scans of 7 different rods (C13, G01, G02, J11, K10, L02, and M04, neglecting K02 at this time) to the average burnup given by the simulation for each of the rods individually. The resulting fraction in each axial zone is then averaged for the 7 different rods so that it can represent every fuel pin in the assembly. The burnup in each of the 26 axial zones of rods in all ROK assemblies will then be directly adjusted using this fraction, which is given in Table 1. Note that the gamma scan data given by ROK for assembly G23 included a length of {approx}3686 mm, so the first 12 mm and the last 14 mm were ignored to give an actual rod length of {approx}366 cm. To represent assembly F02 in which no pin-by-pin burnup distribution is given by ROK, we must model it using infinitely-reflected geometry but can look at the effects of measuring in different axial zones by using intermediate burnup files (i.e. smaller burnups than 28 GWd/MTU) and determining which axial zone(s) each burnup represents. Details for assembly F02 are then given in Tables 2 and 3, which is given in Table 1 and has 44 total axial zones to represent the top meter in explicit detail in addition to the other 26 zones. Note that the MCNP files for F02 were created using the Monte Carlo burnup linkage code Monteburns, which saves MCNP input files with detailed compositions as a function of burnup. The 'intermediate burnup files' produced for F02 include a cooling time of 27 years. The axial location of 5 spacers was also included in the ROK F02 assembly in which each spacer contained a length of 3.81 cm. Note that due to the nature of Monteburns, which was run in a special fashion for this problem, the step number increments after the 27 year decay, so the second column of Table 2 refers to the step number that should be used in the Monteburns files.

  1. PVMRW2013 Wed., Feb. 27, 10:00 Discussion notes: | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PVMRW2013 Wed., Feb. 27, 10:00 Discussion notes: We hear that the dampl heat test causes failures that are not representative of field failure... PDF icon...

  2. AHTR Refueling Systems and Process Description

    SciTech Connect (OSTI)

    Varma, Venugopal Koikal; Holcomb, David Eugene; Bradley, Eric Craig; Zaharia, Nathaniel M; Cooper, Eliott J

    2012-07-01

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

  3. AHTR Refueling Systems and Process Description

    SciTech Connect (OSTI)

    Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

    2012-07-15

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the levels of maturity of the various SSCs to provide guidance for future technology developments. The conceptual design information presented in this report is very preliminary in nature. Significant uncertainty remains about several aspects of the process and even the radiation and mechanical performance of plate-type coated-particle fuel.

  4. CHP R&D Project Descriptions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CHP R&D Project Descriptions CHP R&D Project Descriptions The CHP R&D project portfolio includes advanced reciprocating engine systems (ARES), packaged CHP systems, high-value applications, fuel-flexible CHP, and demonstrations of these technologies. Project fact sheets and short project descriptions are provided below: Advanced Reciprocating Engine Systems Advanced Reciprocating Engine Systems (ARES) The ARES program is designed to promote separate, but parallel engine development

  5. 2015 ASP Program Report Description | Department of Energy

    Energy Savers [EERE]

    ASP Program Report Description 2015 ASP Program Report Description This report provides an overview of the ASP's activities for Fiscal Year (FY) 2015 for the United States (U.S.) Department of Energy (DOE or Department), including the National Nuclear Security Administration (NNSA). The ASP is managed by the Office of Environment, Health, Safety and Security (AU), Office of Sustainable Environmental Stewardship. The ASP fiscal year reports supplement the ASP Program Description, March 2016,

  6. Integrated Program Management Report (IPMR) Data Item Description (DID) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Integrated Program Management Report (IPMR) Data Item Description (DID) Integrated Program Management Report (IPMR) Data Item Description (DID) Integrated Program Management Report (IPMR) combines the Contractor Performance Report (CPR) and Integrated Master Schedule (IMS) reporting requirements on contracts requiring Earned Value Management (EVM) reporting of project/contract performance. Document available for download via link below provides Data Item Description

  7. Section I - FUNDING OPPORTUNITY DESCRIPTION | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Section I - FUNDING OPPORTUNITY DESCRIPTION More Documents & Publications U. S. Department of Energy - Headquarters Advanced Research Projects Agency Advanced Research Projects...

  8. Tank Monitor and Control System (TMACS) Version Description Document (VDD)

    SciTech Connect (OSTI)

    BARNES, D.A.

    2000-07-06

    This document updates the Version Description Document with the changes incorporated in the Revision 12.0 software installation on the Tank Monitor and Control System (TMACS).

  9. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    further description Trainor Guitton Hoversten Nordquist Intani Value of information analysis using geothermal field data accounting for multiple interpretations determining new...

  10. Description of Induced Nuclear Fission with Skyrme Energy Functionals...

    Office of Scientific and Technical Information (OSTI)

    Fragment Properties Citation Details In-Document Search Title: Description of Induced Nuclear Fission with Skyrme Energy Functionals: I. Static Potential Energy Surfaces and...

  11. Description of Induced Nuclear Fission with Skyrme Energy Functionals...

    Office of Scientific and Technical Information (OSTI)

    of Induced Nuclear Fission with Skyrme Energy Functionals: II. Finite Temperature Effects Citation Details In-Document Search Title: Description of Induced Nuclear Fission with ...

  12. Microscopic description of fission dynamics: finite element method...

    Office of Scientific and Technical Information (OSTI)

    Title: Microscopic description of fission dynamics: finite element method resolution of ... This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and ...

  13. TITLE AUTHORS SUBJECT SUBJECT RELATED DESCRIPTION PUBLISHER AVAILABILI...

    Office of Scientific and Technical Information (OSTI)

    the experimental method and Free Precession Method descriptions and then experimental design elements ending with a summary A new nEDM experiment is under development with a...

  14. Descriptions of ESPC Task Order Schedules and Placement of Pricing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pricing Information (IDIQ Attachment J-5) Descriptions of ESPC Task Order Schedules and Placement of Pricing Information (IDIQ Attachment J-5) Document provides task order ...

  15. SSL Selections Descriptions v6.xls | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selections Descriptions v6.xls More Documents & Publications Solid-State Lighting Recovery Act Award Selections 2015 Project Portfolio 2014 Solid-State Lighting Project Portfolio

  16. name SRSCRO description url http www srscro org namespaces oembed...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    description url http www srscro org namespaces oembed authentication routes namespace methods GET endpoints methods GET args context required false default view links self http...

  17. New Mexico Hydrogen Fuels Challenge Program Description The New...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels Challenge is an event that provides a hands-on opportunity for middle school students (grades...

  18. PVMRW2013 Discussion notes. Tues. Feb. 26, 5:30 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    do see some bad diodes going into the field... PDF icon discussionnotes_tues_530.pdf More Documents & Publications PVMRW2013 Discussion notes: Tues. Feb. 26: 10:45 PVMRW2013 Discussion notes Tues. Feb. 26 2013, 2:30 On the Occurrence of Thermal Runaway in Diode in the J-Box

  19. DOE-RL Integrated Safety Management System Description

    SciTech Connect (OSTI)

    SHOOP, D.S.

    2000-09-01

    The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions.

  20. PVMRW2013 Discussion notes: Tues. Feb. 26: 10:45 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    If the mechanical properties of the parts of the module... PDF icon discussionnotes_tues_1045.pdf More Documents & Publications PVMRW2013 Discussion notes Tues. Feb. 26 2013, 2:30

  1. CEM_Metrics_and_Technical_Note_7_14_10.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    clothes dryer
    Credit: Oak Ridge National Lab Heat Pump Clothes Dryer CEMMetricsandTechnicalNote71410.pdf Wind Vision: A New Era for Wind Power in the United States

  2. Note: On the wavelength dependence of the intensity calibration factor of

    Office of Scientific and Technical Information (OSTI)

    extreme ultraviolet spectrometer determined with profile measurement of bremsstrahlung continuum (Journal Article) | SciTech Connect Note: On the wavelength dependence of the intensity calibration factor of extreme ultraviolet spectrometer determined with profile measurement of bremsstrahlung continuum Citation Details In-Document Search Title: Note: On the wavelength dependence of the intensity calibration factor of extreme ultraviolet spectrometer determined with profile measurement of

  3. Publisher's Note: ScGaN alloy growth by molecular beam epitaxy: Evidence

    Office of Scientific and Technical Information (OSTI)

    for a metastable layered hexagonal phase [Phys. Rev. B 70, 193309 (2004)] (Journal Article) | SciTech Connect Publisher's Note: ScGaN alloy growth by molecular beam epitaxy: Evidence for a metastable layered hexagonal phase [Phys. Rev. B 70, 193309 (2004)] Citation Details In-Document Search Title: Publisher's Note: ScGaN alloy growth by molecular beam epitaxy: Evidence for a metastable layered hexagonal phase [Phys. Rev. B 70, 193309 (2004)] No abstract prepared. Authors: Constantin, Costel

  4. Microsoft Word - Appendix D_LegalDescription.doc

    Office of Legacy Management (LM)

    Boundary for the Chemical Plant Area Weldon Spring Site LTS&M Plan U.S. Department of Energy Doc. No. S0079000 July 2005 Page D-4 Legal Description for the Chemical Plant Area All ...

  5. Hanford Site existing irradiated fuel storage facilities description

    SciTech Connect (OSTI)

    Willis, W.L.

    1995-01-11

    This document describes facilities at the Hanford Site which are currently storing spent nuclear fuels. The descriptions provide a basis for the no-action alternatives of ongoing and planned National Environmental Protection Act reviews.

  6. The art and science of magnet design: Selected notes of Klaus Halbach. Volume 2

    SciTech Connect (OSTI)

    1995-02-01

    This volume contains a compilation of 57 notes written by Dr. Klaus Halbach selected from his collection of over 1650 such documents. It provides an historic snapshot of the evolution of magnet technology and related fields as the notes range from as early as 1965 to the present, and is intended to show the breadth of Dr. Halbach`s interest and ability that have long been an inspiration to his many friends and colleagues. As Halbach is an experimental physicist whose scientific interests span many areas, and who does his most innovative work with pencil and paper rather than at the workbench or with a computer, the vast majority of the notes in this volume were handwritten and their content varies greatly--some reflect original work or work for a specific project, while others are mere clarifications of mathematical calculations or design specifications. As the authors converted the notes to electronic form, some were superficially edited and corrected, while others were extensively re-written to reflect current knowledge and notation. The notes are organized under five categories which reflect their primary content: Beam Position Monitors, (bpm), Current Sheet Electron Magnets (csem), Magnet Theory, (thry), Undulators and Wigglers (u-w), and Miscellaneous (misc). Within the category, they are presented chronologically starting from the most recent note and working backwards in time.

  7. General integral relations for the description of scattering states using

    Office of Scientific and Technical Information (OSTI)

    the hyperspherical adiabatic basis (Journal Article) | SciTech Connect General integral relations for the description of scattering states using the hyperspherical adiabatic basis Citation Details In-Document Search Title: General integral relations for the description of scattering states using the hyperspherical adiabatic basis In this work we investigate 1+2 reactions within the framework of the hyperspherical adiabatic expansion method. With this aim two integral relations, derived from

  8. Microscopic Description of Induced Nuclear Fission (Conference) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Microscopic Description of Induced Nuclear Fission Citation Details In-Document Search Title: Microscopic Description of Induced Nuclear Fission Authors: Schunck, N Publication Date: 2012-12-13 OSTI Identifier: 1059062 Report Number(s): LLNL-PROC-608273 DOE Contract Number: W-7405-ENG-48 Resource Type: Conference Resource Relation: Conference: Presented at: 10th International Conference on Clustering Aspects of Nuclear Structure and Dynamics, Debrecen, Hungary, Sep 24 - Sep 28

  9. Microscopic Description of Nuclear Fission: Fission Barrier Heights of

    Office of Scientific and Technical Information (OSTI)

    Even-Even Actinides (Conference) | SciTech Connect Microscopic Description of Nuclear Fission: Fission Barrier Heights of Even-Even Actinides Citation Details In-Document Search Title: Microscopic Description of Nuclear Fission: Fission Barrier Heights of Even-Even Actinides Authors: McDonnell, J ; Schunck, N ; Nazarewicz, W Publication Date: 2013-01-22 OSTI Identifier: 1062216 Report Number(s): LLNL-PROC-612272 DOE Contract Number: W-7405-ENG-48 Resource Type: Conference Resource Relation:

  10. Microscopic description of fission dynamics: finite element method

    Office of Scientific and Technical Information (OSTI)

    resolution of the TDGCM+GOA equation (Conference) | SciTech Connect Conference: Microscopic description of fission dynamics: finite element method resolution of the TDGCM+GOA equation Citation Details In-Document Search Title: Microscopic description of fission dynamics: finite element method resolution of the TDGCM+GOA equation Authors: Regnier, D ; Dubray, N ; Schunck, N ; Verriere, M Publication Date: 2015-10-16 OSTI Identifier: 1239187 Report Number(s): LLNL-PROC-678472 DOE Contract

  11. OMB 1910-5122, Human Reliability Program - Description of Collections |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy OMB 1910-5122, Human Reliability Program - Description of Collections OMB 1910-5122, Human Reliability Program - Description of Collections Human Reliability Program Certification (DOE F 470.3). Under the Department of Energy Human Reliability Program (HRP), individuals who are applicants for or incumbents in designated positions must be evaluated to ensure that they meet the requirements for certification in the program. This form documents that each part of the

  12. Physical Description and Experimental Characterization of the Resistive

    Office of Scientific and Technical Information (OSTI)

    Switching Filament. (Conference) | SciTech Connect Physical Description and Experimental Characterization of the Resistive Switching Filament. Citation Details In-Document Search Title: Physical Description and Experimental Characterization of the Resistive Switching Filament. Abstract not provided. Authors: Lohn, Andrew ; Mickel, Patrick R. ; James, Conrad D. ; Marinella, Matthew Publication Date: 2014-02-01 OSTI Identifier: 1141260 Report Number(s): SAND2014-1499C 504908 DOE Contract

  13. Descriptive Model of a Generic WAMS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS The Department of Energy's (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation's electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the

  14. Description of Induced Nuclear Fission with Skyrme Energy Functionals: II.

    Office of Scientific and Technical Information (OSTI)

    Finite Temperature Effects (Journal Article) | SciTech Connect Journal Article: Description of Induced Nuclear Fission with Skyrme Energy Functionals: II. Finite Temperature Effects Citation Details In-Document Search Title: Description of Induced Nuclear Fission with Skyrme Energy Functionals: II. Finite Temperature Effects Authors: Schunck, N ; Duke, D ; Carr, H Publication Date: 2013-11-06 OSTI Identifier: 1184748 Report Number(s): LLNL-JRNL-645837 DOE Contract Number: DE-AC52-07NA27344

  15. Summary description of the Fast Flux Test Facility

    SciTech Connect (OSTI)

    Cabell, C.P.

    1980-12-01

    This document has been compiled and issued to provide an illustrated engineering summary description of the FFTF. The document is limited to a description of the plant and its functions, and does not cover the extensive associated programs that have been carried out in the fields of design, design analysis, safety analysis, fuels development, equipment development and testing, quality assurance, equipment fabrication, plant construction, acceptance testing, operations planning and training, and the like.

  16. Toward a Minimal Representation of Aerosols in Climate Models: Description

    Office of Scientific and Technical Information (OSTI)

    and Evaluation in the Community Atmosphere Model CAM5 (Journal Article) | SciTech Connect Toward a Minimal Representation of Aerosols in Climate Models: Description and Evaluation in the Community Atmosphere Model CAM5 Citation Details In-Document Search Title: Toward a Minimal Representation of Aerosols in Climate Models: Description and Evaluation in the Community Atmosphere Model CAM5 A modal aerosol module (MAM) has been developed for the Community Atmosphere Model version 5 (CAM5), the

  17. Unified Description of Nambu-Goldstone Bosons without Lorentz Invariance

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Unified Description of Nambu-Goldstone Bosons without Lorentz Invariance Citation Details In-Document Search Title: Unified Description of Nambu-Goldstone Bosons without Lorentz Invariance Authors: Watanabe, Haruki ; Murayama, Hitoshi Publication Date: 2012-06-21 OSTI Identifier: 1103630 Type: Publisher's Accepted Manuscript Journal Name: Physical Review Letters Additional Journal Information: Journal Volume: 108; Journal Issue: 25; Journal ID: ISSN

  18. Variational description of continuum states in terms of integral relations

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Variational description of continuum states in terms of integral relations Citation Details In-Document Search Title: Variational description of continuum states in terms of integral relations Two integral relations derived from the Kohn variational principle (KVP) are used for describing scattering states. In usual applications the KVP requires the explicit form of the asymptotic behavior of the scattering wave function. This is not the case when the

  19. Consistent description of kinetics and hydrodynamics of dusty plasma

    SciTech Connect (OSTI)

    Markiv, B.; Tokarchuk, M.; National University Lviv Polytechnic, 12 Bandera St., 79013 Lviv

    2014-02-15

    A consistent statistical description of kinetics and hydrodynamics of dusty plasma is proposed based on the Zubarev nonequilibrium statistical operator method. For the case of partial dynamics, the nonequilibrium statistical operator and the generalized transport equations for a consistent description of kinetics of dust particles and hydrodynamics of electrons, ions, and neutral atoms are obtained. In the approximation of weakly nonequilibrium process, a spectrum of collective excitations of dusty plasma is investigated in the hydrodynamic limit.

  20. Waste receiving and processing plant control system; system design description

    SciTech Connect (OSTI)

    LANE, M.P.

    1999-02-24

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

  1. DOE-RL Integrated Safety Management System Program Description

    SciTech Connect (OSTI)

    SHOOP, D.S.

    2000-06-29

    The purpose of this Integrated Safety Management System (ISMS) Program Description (PD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This PD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this PD contains some information on contractor processes and procedures which then require RL approval or oversight.

  2. Unified description of superconducting pairing symmetry in electron-doped

    Office of Scientific and Technical Information (OSTI)

    Fe-based-122 compounds (Journal Article) | SciTech Connect Unified description of superconducting pairing symmetry in electron-doped Fe-based-122 compounds Citation Details In-Document Search This content will become publicly available on June 25, 2016 Title: Unified description of superconducting pairing symmetry in electron-doped Fe-based-122 compounds Authors: Li, Bo ; Pan, Lihua ; Tai, Yuan-Yen ; Graf, Matthias J. ; Zhu, Jian-Xin ; Bassler, Kevin E. ; Ting, C. S. Publication Date:

  3. Publisher's Note: "Electrical spin injection in modulation-doped GaAs

    Office of Scientific and Technical Information (OSTI)

    from an in situ grown Fe/MgO layer" [Appl. Phys. Lett. 107, 102407 (2015)] (Journal Article) | SciTech Connect Publisher's Note: "Electrical spin injection in modulation-doped GaAs from an in situ grown Fe/MgO layer" [Appl. Phys. Lett. 107, 102407 (2015)] Citation Details In-Document Search Title: Publisher's Note: "Electrical spin injection in modulation-doped GaAs from an in situ grown Fe/MgO layer" [Appl. Phys. Lett. 107, 102407 (2015)] No abstract prepared.

  4. Publisher's Note: High-spin lifetime measurements in the N=Z nucleus {sup

    Office of Scientific and Technical Information (OSTI)

    72}Kr [Phys. Rev. C 75, 041301(R) (2007)] (Journal Article) | SciTech Connect Publisher's Note: High-spin lifetime measurements in the N=Z nucleus {sup 72}Kr [Phys. Rev. C 75, 041301(R) (2007)] Citation Details In-Document Search Title: Publisher's Note: High-spin lifetime measurements in the N=Z nucleus {sup 72}Kr [Phys. Rev. C 75, 041301(R) (2007)] No abstract prepared. Authors: Andreoiu, C. ; Svensson, C. E. ; Afanasjev, A. V. ; Austin, R. A. E. ; Carpenter, M. P. ; Dashdorj, D. ; Finlay,

  5. A note from Howard H. Baker, Jr. | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A note from Howard H. ... A note from Howard H. Baker, Jr. Posted: February 11, 2013 - 3:49pm | Y-12 Report | Volume 9, Issue 2 | 2013 "I remember visiting Oak Ridge at the height of its construction. The town had grown up out of corn fields in super secrecy. My dad and I didn't know its purpose, but we knew it involved important, vital work. That vitally important work continues today. For 70 years Y-12, in particular, has served the nation as a reservoir of talent and insight. The very

  6. Tank waste remediation system technical baseline summary description

    SciTech Connect (OSTI)

    Raymond, R.E.

    1998-01-08

    This document is one of the tools used to develop and control the mission work as depicted in the included figure. This Technical Baseline Summary Description document is the top-level tool for management of the Technical Baseline for waste storage operations.

  7. SPEAR fuel reliability code system. General description. [PWR; BWR

    SciTech Connect (OSTI)

    Christensen, R.

    1980-03-01

    A general description is presented for the SPEAR fuel reliability code system. Included is a discussion of the methodology employed and the structure of the code system, as well as discussion of the major components: the data preparation routines, the mechanistic fuel performance model, the mechanistic cladding failure model, and the statistical failure model.

  8. A climatological description of the Savannah River Site

    SciTech Connect (OSTI)

    Hunter, C.H.

    1990-05-22

    This report provides a general climatological description of the Savannah River Site. The description provides both regional and local scale climatology. The regional climatology includes a general regional climatic description and presents information on occurrence frequencies of the severe meteorological phenomena that are important considerations in the design and siting of a facility. These phenomena include tornadoes, thunderstorms, hurricanes, and ice/snow storms. Occurrence probabilities given for extreme tornado and non-tornado winds are based on previous site specific studies. Local climatological conditions that are significant with respect to the impact of facility operations on the environment are described using on-site or near-site meteorological data. Summaries of wind speed, wind direction, and atmospheric stability are primarily based on the most recently generated five-year set of data collected from the onsite meteorological tower network (1982--86). Temperature, humidity, and precipitation summaries include data from SRL's standard meteorological instrument shelter and the Augusta National Weather Service office at Bush Field through 1986. A brief description of the onsite meteorological monitoring program is also provided. 24 refs., 15 figs., 22 tabs.

  9. ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE

    Office of Legacy Management (LM)

    ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE UNIVERSITY OF CHICAGO CONTAMINATED AS A RESULT OF PREVIOUS MED/AEC ACTIVITIES Prepared by Environmental Research Division Argonne National Laboratory Argonne, Illinois December 1983 Prepared for U.S. Department of Energy Oak Ridge Operations Technical Services Division Oak Ridge, Tennessee II-39 CONTENTS Page Summary of Proposed Action ....................... 1 Setting . . . . . . . . . . . . . . . . . . . . . . . .

  10. Computer System, Cluster, and Networking Summer Institute Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System, Cluster, and Networking Summer Institute Program Description The Computer System, Cluster, and Networking Summer Institute (CSCNSI) is a focused technical enrichment program targeting third-year college undergraduate students currently engaged in a computer science, computer engineering, or similar major. The program emphasizes practical skill development in setting up, configuring, administering, testing, monitoring, and scheduling computer systems, supercomputer clusters, and computer

  11. OTS NOTE

    Office of Legacy Management (LM)

    work site by the National Lead Company of Ohio (NLO), an Atomic Energy Commission (AEC) prime contractor. The data sheets indicate that the former Baker-Perkins Company...

  12. OTS NOTE

    Office of Legacy Management (LM)

    ... characteristics of uranium metal, DuPont (as agent for Manhattan Engineering ... prior to completion of this work, DuPont placed Purchase Order RPG-800 l2 with ...

  13. OTS NOTE

    Office of Legacy Management (LM)

    FUSRAP NJ.18 Exxon Research and Engineering Company The Former Standard Oil Development Company Linden, New Jersey Site Function In the spring of 1942, Standard Oil Development ...

  14. Explanatory Notes

    U.S. Energy Information Administration (EIA) Indexed Site

    data at a State level on 14 petroleum products for various retail and wholesale marketing categories. The Form EIA-782B collects resellerretailer monthly price and volume...

  15. OTS NOTE

    Office of Legacy Management (LM)

    2, 1990 TO: W. Alexander Williams FROM: Don Mackenzie &d> SUBJECT: Elimination of 3 Facilities from FUSRAP Enclosed are elimination recommendations for Vitro Chemical Co.,...

  16. OTS NOTE

    Office of Legacy Management (LM)

    January 15, 1991 TO: Alexander Williams FROM: Dan Stout@ SUBJECT: Gruen Watch Company Consideration Recommendation Attached for your review is a consideration recommendation for...

  17. OTS NOTE

    Office of Legacy Management (LM)

    Source Material q Residue 0 Natural Radioactive Material from Non-Nuclear Activities 0 Man-Made 0 Other--- Comment ---...

  18. Explanatory Notes

    U.S. Energy Information Administration (EIA) Indexed Site

    complete enumera- tion has the same nonsampling errors as the sample survey. The sampling error, or standard error of the estimate, is a measure of the variability among the...

  19. Resilient Electric Distribution Grid R&D Workshop- June 11, 2014- Breakout Sessions Notes and Reports

    Broader source: Energy.gov [DOE]

    On June 11, 2014, the Department of Energy held a half-day workshop to identify key R&D activities for enhancing the resilience of electric distribution grids to natural disasters. Notes and reports from two concurrent breakout sessions are available for download.

  20. PVMRW2013 Wed., Feb. 27, 1:45 Discussion notes | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    It could be useful to mix UVA and UVB and test the effects of both at the same time... PDF icon discussionnotes_weds_145.pdf More Documents & Publications PVMRW2013 Wed., Feb. 27, 10:00 Discussion notes: PVMRW2013 Wed., Feb. 27, 3:00 Final Discussion

  1. Description of recommended non-thermal mixed waste treatment technologies: Version 1.0

    SciTech Connect (OSTI)

    1995-08-01

    This document contains description of the technologies selected for inclusions in the Integrated Nonthermal Treatment Systems (INTS) Study. The purpose of these descriptions is to provide a more complete description of the INTS technologies. It supplements the summary descriptions of candidate nonthermal technologies that were considered for the INTS.

  2. Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes

    Energy Savers [EERE]

    [Read-Only] | Department of Energy DOE O 413 3B Brief v9 with key points in notes [Read-Only] Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] PDF icon Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] More Documents & Publications Example BCP Template Microsoft PowerPoint - DOE O 413 3B Brief v9 with key points in notes [Read-Only] CD-2, Approve Performance Baseline External Independent Review (EIR) Standard Operating

  3. Workshop Notes from ""Compressed Natural Gas and Hydrogen Fuels: Lessons Learned for the Safe Deployment of Vehicles"" Workshop, December 10-11, 2009

    Broader source: Energy.gov [DOE]

    These notes provide information about the Compressed Natural Gas and Hydrogen Fuels workshop in December 2009.

  4. Task Descriptions | Center for Bio-Inspired Solar Fuel Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Task Descriptions Center for Bio-Inspired Solar Fuel Production Central to design of a complete system for solar water oxidation and hydrogen production is incorporation of synthetic components inspired by natural systems into one operational unit. The research effort of the Center is naturally divided into the following subtasks: Subtask 1. Total systems analysis, assembly and testing The solar water splitting device consists of four subsystems, each of which is being investigated by one of the

  5. Description of induced nuclear fission with Skyrme energy functionals. II.

    Office of Scientific and Technical Information (OSTI)

    Finite temperature effects (Journal Article) | SciTech Connect functionals. II. Finite temperature effects Citation Details In-Document Search Title: Description of induced nuclear fission with Skyrme energy functionals. II. Finite temperature effects Authors: Schunck, N. ; Duke, D. ; Carr, H. Publication Date: 2015-03-25 OSTI Identifier: 1180645 Grant/Contract Number: AC52-07NA27344 Type: Publisher's Accepted Manuscript Journal Name: Physical Review C Additional Journal Information: Journal

  6. Description of induced nuclear fission with Skyrme energy functionals:

    Office of Scientific and Technical Information (OSTI)

    Static potential energy surfaces and fission fragment properties (Journal Article) | SciTech Connect functionals: Static potential energy surfaces and fission fragment properties Citation Details In-Document Search Title: Description of induced nuclear fission with Skyrme energy functionals: Static potential energy surfaces and fission fragment properties Authors: Schunck, N. ; Duke, D. ; Carr, H. ; Knoll, A. Publication Date: 2014-11-06 OSTI Identifier: 1180689 Grant/Contract Number:

  7. Postdoctoral Program Program Description The Postdoctoral (Postdoc) Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Postdoctoral Program Program Description The Postdoctoral (Postdoc) Research program offers the opportunity for appointees to perform research in a robust scientific R&D environment, present and publish research, advance knowledge in basic and applied science, and strengthen national scientific and technical capabilities. Program Mission The Postdoctoral Program provides the opportunity for appointees to perform scientifically rich research, showcase their work through publishing and

  8. 2010-12-1-DICE-Diagnostic-Service-Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Editor: Joe Metzger Status: DRAFT (v1.0) Date: 2010-12-1 1 General Service Description for DICE Network Diagnostic Services The DICE collaboration network diagnostic service will simplify the process of debugging, isolating, and correcting multi-domain network performance problems. The diagnostic service will allow users to measure network characteristics across multi-domain network paths. The service is designed to support network engineers in situations where a customer is experiencing

  9. ADDENDUM TO ACTION DESCRIPTION MEMORANDUM NIAGARA FALLS STORAGE SITE

    Office of Legacy Management (LM)

    ADDENDUM TO ACTION DESCRIPTION MEMORANDUM NIAGARA FALLS STORAGE SITE PROPOSED INTERIM REMEDIAL ACTIONS FOR FY 1983-85 ACCELERATED PROGRAM (1984 VICINITY PROPERTIES CLEANUP) Prepared by Environmental Research Division Argonne National Laboratory Argonne, Illinois July 1984 Prepared for U.S. Department of Energy Oak Ridge Operations Technical Services Division Oak Ridge, Tennessee CONTENTS Page SUMMARY OF PROPOSED ACTION AND RELATED ACTIVITIES ........... 1 HISTORY AND ENVIRONMENTAL SETTING

  10. ARM Value-Added Cloud Products: Description and Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Value-Added Cloud Products: Description and Status M. A. Miller, K. L. Johnson, and D. T. Troyan Brookhaven National Laboratory Upton, New York E. E. Clothiaux Pennsylvania State University University Park, Pennsylvania E. J. Mlawer Atmospheric and Environmental Research, Inc. Cambridge, Massachusetts G. G. Mace University of Utah Salt Lake City, Utah Introduction The Atmospheric Radiation Measurement (ARM) Program operates a variety of state-of-the-art active and passive remote sensors at its

  11. Community College Institute (CCI) Program Description The Community College Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community College Institute (CCI) Program Description The Community College Internship (CCI) program seeks to encourage community college students to enter technical careers relevant to the DOE mission by providing technical training experiences at the DOE laboratories. Selected students participate as interns appointed at one of 15 participating DOE laboratories. They work on technologies or instrumentation projects at major research facilities supporting DOE's mission under the guidance of

  12. Reducing uncertainty in geostatistical description with well testing pressure data

    SciTech Connect (OSTI)

    Reynolds, A.C.; He, Nanqun; Oliver, D.S.

    1997-08-01

    Geostatistics has proven to be an effective tool for generating realizations of reservoir properties conditioned to static data, e.g., core and log data and geologic knowledge. Due to the lack of closely spaced data in the lateral directions, there will be significant variability in reservoir descriptions generated by geostatistical simulation, i.e., significant uncertainty in the reservoir descriptions. In past work, we have presented procedures based on inverse problem theory for generating reservoir descriptions (rock property fields) conditioned to pressure data and geostatistical information represented as prior means for log-permeability and porosity and variograms. Although we have shown that the incorporation of pressure data reduces the uncertainty below the level contained in the geostatistical model based only on static information (the prior model), our previous results assumed did not explicitly account for uncertainties in the prior means and the parameters defining the variogram model. In this work, we investigate how pressure data can help detect errors in the prior means. If errors in the prior means are large and are not taken into account, realizations conditioned to pressure data represent incorrect samples of the a posteriori probability density function for the rock property fields, whereas, if the uncertainty in the prior mean is incorporated properly into the model, one obtains realistic realizations of the rock property fields.

  13. Publisher's Note: New mechanism for the top-bottom mass hierarchy [Phys.

    Office of Scientific and Technical Information (OSTI)

    Rev. D 70, 055006 (2004)] (Journal Article) | SciTech Connect New mechanism for the top-bottom mass hierarchy [Phys. Rev. D 70, 055006 (2004)] Citation Details In-Document Search Title: Publisher's Note: New mechanism for the top-bottom mass hierarchy [Phys. Rev. D 70, 055006 (2004)] No abstract prepared. Authors: Hashimoto, Michio ; Kanemura, Shinya Publication Date: 2004-12-01 OSTI Identifier: 20698190 Resource Type: Journal Article Resource Relation: Journal Name: Physical Review. D,

  14. Publisher's Note: Phase effects from the general neutrino Yukawa matrix on

    Office of Scientific and Technical Information (OSTI)

    lepton flavor violation [Phys. Rev. D 72, 055012 (2005)] (Journal Article) | SciTech Connect Phase effects from the general neutrino Yukawa matrix on lepton flavor violation [Phys. Rev. D 72, 055012 (2005)] Citation Details In-Document Search Title: Publisher's Note: Phase effects from the general neutrino Yukawa matrix on lepton flavor violation [Phys. Rev. D 72, 055012 (2005)] No abstract prepared. Authors: Kanemura, Shinya ; Matsuda, Koichi ; Ota, Toshihiko ; Shindou, Tetsuo ; Takasugi,

  15. COLLOQUIUM - NOTE SPECIAL TIME OF 3:15PM: Savannah River National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory: Underpinning Critical National Missions | Princeton Plasma Physics Lab May 15, 2013, 3:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM - NOTE SPECIAL TIME OF 3:15PM: Savannah River National Laboratory: Underpinning Critical National Missions Dr. Jeff Griffin Savannah River National Laboratory The Cold War mission of the Savannah River Site in South Carolina was to produce nuclear materials for the national defense. Since the Cold War ended, SRS has continued to ensure United

  16. COLLOQUIUM - PLEASE NOTE SPECIAL DATE/TIME: The Magnetospheric MultiScale

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mission Investigation of Magnetic Reconnection | Princeton Plasma Physics Lab February 21, 2013, 10:30am to 12:00pm Colloquia MBG Auditorium COLLOQUIUM - PLEASE NOTE SPECIAL DATE/TIME: The Magnetospheric MultiScale Mission Investigation of Magnetic Reconnection Professor Roy Torbert University of New Hampshire Presentation: File TC21FEB2013_RBTorbert_COMPRESSED.pptx In late fall 2014, NASA will launch the Magnetospheric Multiscale (MMS) mission to study the kinetic physics of magnetic

  17. System Advisor Model, SAM 2014.1.14: General Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System Advisor Model, SAM 2014.1.14: General Description Nate Blair, Aron P. Dobos, Janine Freeman, Ty Neises, and Michael Wagner National Renewable Energy Laboratory Tom Ferguson, Paul Gilman, and Steven Janzou Independent Consultants Technical Report NREL/TP-6A20-61019 February 2014 NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency & Renewable Energy Operated by the Alliance for Sustainable Energy, LLC This report is available at no cost from the

  18. PBS ABB Title ABB Description/Scope ORP-0014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Title ABB Description/Scope ORP-0014 242A Evaporator/222-S Laboratory * Operate and maintain the 242-A Evaporator * 222-S Safe and Compliant Operations * 222-S Facililty Reliability * 222-S Analytical Support/Equipment * 222-S Process Chemistry and Waste Handling ORP-0014 A/AX - Farm Retrieval Design, procurement, construction, readiness assessments, start-up, and operations of waste retrieval systems for 241-A and 241-AX Tank Farms. New systems will: 1) retrieve waste from 241-A and 241-AX

  19. Requirements Management System Browser (RMSB) software design description

    SciTech Connect (OSTI)

    Frank, D.D.

    1996-09-30

    The purpose of this document is to provide an ``as-built`` design description for the Requirements Management System Browser (RMSB) application. The Graphical User Interface (GUI) and database structure design are described for the RMSB application, referred to as the ``Browser.`` The RMSB application provides an easy to use PC-based interface to browse systems engineering data stored and managed in a UNIX software application. The system engineering data include functions, requirements, and architectures that make up the Tank Waste Remediation System (TWRS) technical baseline.

  20. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    SciTech Connect (OSTI)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  1. 850/sup 0/C VHTR plant technical description

    SciTech Connect (OSTI)

    Not Available

    1980-06-01

    This report describes the conceptual design of an 842-MW(t) process heat very high temperature reactor (VHTR) plant having a core outlet temperature of 850/sup 0/C (1562/sup 0/F). The reactor is a variation of the high-temperature gas-cooled reactor (HTGR) power plant concept. The report includes a description of the nuclear heat source (NHS) and of the balance of reactor plant (BORP) requirements. The design of the associated chemical process plant is not covered in this report. The reactor design is similar to a previously reported VHTR design having a 950/sup 0/C (1742/sup 0/F) core outlet temperature.

  2. Advances in the ab initio description of nuclear three-cluster...

    Office of Scientific and Technical Information (OSTI)

    description of nuclear three-cluster systems Citation Details In-Document Search Title: Advances in the ab initio description of nuclear three-cluster systems Authors: Redondo, C R ...

  3. Electric Markets Technical Assistance Program: FY2002 Grant Descriptions and Contact Information

    Broader source: Energy.gov [DOE]

    Grant descriptions and contact information for grants awarded in FY 2002 under the Electric Markets Technical Assistance Program

  4. Descriptions of ESPC Task Order Schedules and Placement of Pricing Information (IDIQ Attachment J-5)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Document provides task order schedule descriptions and information on the placement of pricing for energy savings performance contracts (ESPCs).

  5. Electric Markets Technical Assistance Program: FY2003 Grant Descriptions and Contact Information

    Broader source: Energy.gov [DOE]

    Grant descriptions and contact information for grants awarded during FY2003 under the Electric Markets Technical Assistance Program

  6. Electric Markets Technical Assistance Program: FY2001 Grant Descriptions and Contact Information

    Broader source: Energy.gov [DOE]

    Grant descriptions and contact information for grants awarded under the Electric Markets Technical Assistance Program in FY 2001.

  7. Electric energy supply systems: description of available technologies

    SciTech Connect (OSTI)

    Eisenhauer, J.L.; Rogers, E.A.; King, J.C.; Stegen, G.E.; Dowis, W.J.

    1985-02-01

    When comparing coal transportation with electric transmission as a means of delivering electric power, it is desirable to compare entire energy systems rather than just the transportation/transmission components because the requirements of each option may affect the requirements of other energy system components. PNL's assessment consists of two parts. The first part, which is the subject of this document, is a detailed description of the technical, cost, resource and environmental characteristics of each system component and technologies available for these components. The second part is a computer-based model that PNL has developed to simulate construction and operation of alternative system configurations and to compare the performance of these systems under a variety of economic and technical conditions. This document consists of six chapters and two appendices. A more thorough description of coal-based electric energy systems is presented in the Introduction and Chapter 1. Each of the subsequent chapters describes technologies for five system components: Western coal resources (Chapter 2), coal transportation (Chapter 3), coal gasification and gas transmission (Chapter 4), and electric power transmission (Chapter 6).

  8. Thermodynamical description of stationary, asymptotically flat solutions with conical singularities

    SciTech Connect (OSTI)

    Herdeiro, Carlos; Rebelo, Carmen; Radu, Eugen

    2010-05-15

    We examine the thermodynamical properties of a number of asymptotically flat, stationary (but not static) solutions having conical singularities, with both connected and nonconnected event horizons, using the thermodynamical description recently proposed in [C. Herdeiro, B. Kleihaus, J. Kunz, and E. Radu, Phys. Rev. D 81, 064013 (2010).]. The examples considered are the double-Kerr solution, the black ring rotating in either S{sup 2} or S{sup 1}, and the black Saturn, where the balance condition is not imposed for the latter two solutions. We show that not only the Bekenstein-Hawking area law is recovered from the thermodynamical description, but also the thermodynamical angular momentum is the Arnowitt-Deser-Misner angular momentum. We also analyze the thermodynamical stability and show that, for all these solutions, either the isothermal moment of inertia or the specific heat at constant angular momentum is negative, at any point in parameter space. Therefore, all these solutions are thermodynamically unstable in the grand canonical ensemble.

  9. Focused Crawling of the Deep Web Using Service Class Descriptions

    SciTech Connect (OSTI)

    Rocco, D; Liu, L; Critchlow, T

    2004-06-21

    Dynamic Web data sources--sometimes known collectively as the Deep Web--increase the utility of the Web by providing intuitive access to data repositories anywhere that Web access is available. Deep Web services provide access to real-time information, like entertainment event listings, or present a Web interface to large databases or other data repositories. Recent studies suggest that the size and growth rate of the dynamic Web greatly exceed that of the static Web, yet dynamic content is often ignored by existing search engine indexers owing to the technical challenges that arise when attempting to search the Deep Web. To address these challenges, we present DynaBot, a service-centric crawler for discovering and clustering Deep Web sources offering dynamic content. DynaBot has three unique characteristics. First, DynaBot utilizes a service class model of the Web implemented through the construction of service class descriptions (SCDs). Second, DynaBot employs a modular, self-tuning system architecture for focused crawling of the DeepWeb using service class descriptions. Third, DynaBot incorporates methods and algorithms for efficient probing of the Deep Web and for discovering and clustering Deep Web sources and services through SCD-based service matching analysis. Our experimental results demonstrate the effectiveness of the service class discovery, probing, and matching algorithms and suggest techniques for efficiently managing service discovery in the face of the immense scale of the Deep Web.

  10. Neutron Physics. A Revision of I. Halpern's notes on E. Fermi's lectures in 1945

    DOE R&D Accomplishments [OSTI]

    Beckerley, J.G.

    1951-10-16

    In the Fall of 1945 a course in Neutron Physics was given by Professor Fermi as part of the program of the Los Alamos University. The course consisted of thirty lectures most of which were given by Fermi. In his absence R.F. Christy and E. Segre gave several lectures. The present revision is based upon class notes prepared by I. Halpern with some assistance by B.T. Feld and issued first as document LADC 255 and later with wider circulation as MDDC 320.

  11. Note: Rapid reduction of graphene oxide paper by glow discharge plasma

    SciTech Connect (OSTI)

    Bo, Zheng; Qian, Jiajing; Duan, Liangping; Qiu, Kunzan Yan, Jianhua; Cen, Kefa; Han, Zhao Jun; Ostrikov, Kostya

    2015-05-15

    This note reports on a novel method for the rapid reduction of graphene oxide (GO) paper using a glow discharge plasma reactor. Glow discharge is produced and sustained between two parallel-plate graphite electrodes at a pressure of 240 mTorr. By exposing GO paper at the junction of negative-glow and Faraday-dark area for 4 min, the oxygen-containing groups can be effectively removed (C/O ratio increases from 2.6 to 7.9), while the material integrality and flexibility are kept well. Electrochemical measurements demonstrate that the as-obtained reduced GO paper can be potentially used for supercapacitor application.

  12. Note: Design principles of a linear array multi-channel effusive metal-vapor atom source

    SciTech Connect (OSTI)

    Jana, B.; Majumder, A.; Thakur, K. B.; Das, A. K.

    2013-10-15

    Atomic beams can easily be produced by allowing atoms to effuse through a channel. In an earlier investigation [A. Majumder et al., Vacuum 83, 989 (2009)], we had designed, fabricated, and characterized an effusive metal-vapor source using collinear-array of multi-channel. In this note, we describe the theoretical basis of designing the source. Atom density in atomic beam has been estimated using a set of analytical expressions for long-channel operated in transparent mode. Parametric studies on aspect ratio of channel, inter-channel separation, beam width, and vertical distance from the source are carried out. They are useful in providing physical picture and optimizing design parameters.

  13. Hanford Advisory Board FY2014 Work Plan - "A" List - Facilitator notes o

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facilitator notes on midyear status for RAP-lead topics (updated 4/30/14) These are the priority topics that the Board is expected to take action on in FY2014, as agreed to by the TPA and the Board. The timing of these topics drives the need for committee meetings. Their status may change to "topics of interest" if they are delayed or deferred, and if there is agreement to do so among the EIC and Agency Liaisons. Adopted by Consensus, September 6, 2013 Page 1 of 12 Priority Topics -

  14. Summary Notes from 5 March 2008 Generic Technical Issue Discussion on Long-Term Grout Performance

    Office of Environmental Management (EM)

    6, 2008 Page 1 of 6 Summary Notes from 5 March 2008 Generic Technical Issue Discussion on Long-Term Grout Performance Attendees: Representatives from Department of Energy-Headquarters (DOE-HQ) and the U.S. Nuclear Regulatory Commission staff (NRC) met at the DOE offices in Germantown, Maryland on 5 March 2008. Representatives from Department of Energy- Savannah River (DOE-SR), Department of Energy-Idaho (DOE-ID), Department of Energy-Richland (DOE-RL), Department of Energy-River Protection

  15. Attachment 1 - PIC Transcribed Flip Chart Notes Final Meeting Summary Page 12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - PIC Transcribed Flip Chart Notes Final Meeting Summary Page 12 Public Involvement Committee September 4, 2013 Strategic Planning: Quarters by month * Q1: Oct. - Dec. * Q2: Jan - March * Q3: April - June * Q4: July - Sept. Page 1 Strategic Planning: 2014 Topics (Interactive activity) * = priority topic for discussion at meeting; �= priority for future discussion | Quarter prioritized for discussion (Q1, Q2, Q3, Q4) * 100-F Proposed Plan | *** Q2 * 100 D-H Proposed Plan * Draft Land

  16. Geometry Description Markup Language for Physics Simulation And Analysis Applications.

    SciTech Connect (OSTI)

    Chytracek, R.; McCormick, J.; Pokorski, W.; Santin, G.; /European Space Agency

    2007-01-23

    The Geometry Description Markup Language (GDML) is a specialized XML-based language designed as an application-independent persistent format for describing the geometries of detectors associated with physics measurements. It serves to implement ''geometry trees'' which correspond to the hierarchy of volumes a detector geometry can be composed of, and to allow to identify the position of individual solids, as well as to describe the materials they are made of. Being pure XML, GDML can be universally used, and in particular it can be considered as the format for interchanging geometries among different applications. In this paper we will present the current status of the development of GDML. After having discussed the contents of the latest GDML schema, which is the basic definition of the format, we will concentrate on the GDML processors. We will present the latest implementation of the GDML ''writers'' as well as ''readers'' for either Geant4 [2], [3] or ROOT [4], [10].

  17. Use of seismic attributes in geological description of carbonate rocks

    SciTech Connect (OSTI)

    Castrejon-Vacio, F.; Porres-Luna, A.A.

    1994-12-31

    Seismic attributes have been used widely in order to obtain geological description of petroleum reservoirs, especially as a support for the definition of horizontal continuity of strata, with special emphasis on terrigeneous formations. Nevertheless the application of seismic attributes to the study of carbonate and naturally fractured reservoirs has been limited. This paper shows the application of seismic attributes and seismic inversion to the geological and petrophysical characterization of a naturally fractured reservoir with complex lithology, which is characteristic of the most important producing formations in Mexico. The results from these techniques provide the basis for the definition of a realistic geological model, which is of prime concern for the reservoir`s characterization, numerical studies and EOR applications.

  18. Description of the Portsmouth Gas Centrifuge Enrichment Plant

    SciTech Connect (OSTI)

    Arthur, W.B.

    1980-12-16

    The Portsmouth Gas Centrifuge Enrichment Plant (GCEP) will be located at the site of the Portsmouth Gaseous Diffusion Plant in Piketon, Ohio. The purpose of the facility is to provide enriching services for the production of low assay enriched uranium for civilian nuclear power reactors. The construction and operation of the GCEP is administered by the US Department of Energy. The facility will be operated under contract from the US Government. Control of the GCEP rests solely with the US Government, which holds and controls access to the technology. Construction of GCEP is expected to be completed in the mid-1990's. Many facility design and operating procedures are subject to change. Nonetheless, the design described in this report does reflect current thinking. Descriptions of the general facility and major buildings such as the process buildings, feed and withdrawal building, cylinder storage and transfer, recycle/assembly building, and a summary of the centrifuge uranium enriching process are provided in this report.

  19. Understanding Wind Power Costs: The Value of a Comprehensive Approach (Presentation)

    SciTech Connect (OSTI)

    Lantz, E.

    2013-05-01

    The evolution and maturity of the wind industry have often been assessed by considering changes in key metrics including capital costs, capacity factor, turbine pricing, and in some cases electricity sales data. However, wind turbines and plants represent a complex system optimization problem and each of these metrics, in isolation, fails to tell the complete story of technological progress and industry advancement. By contrast, the levelized cost of energy (LCOE) provides a more comprehensive and nuanced perspective on industry trends. LCOE can be used to analyze the effect of individual changes (by holding other variables constant) or to understand the complex interactions that might occur for example between turbine costs and productivity. Moreover, LCOE offers a reflection of the total production costs and required revenue for wind plants. This presentation provides examples of how a narrow focus on individual industry metrics can provide inaccurate representations of industry trends while also demonstrating how LCOE captures the array of critical industry variables to provide a greater level of insight.

  20. Fundamental Statistical Descriptions of Plasma Turbulence in Magnetic Fields

    SciTech Connect (OSTI)

    John A. Krommes

    2001-02-16

    A pedagogical review of the historical development and current status (as of early 2000) of systematic statistical theories of plasma turbulence is undertaken. Emphasis is on conceptual foundations and methodology, not practical applications. Particular attention is paid to equations and formalism appropriate to strongly magnetized, fully ionized plasmas. Extensive reference to the literature on neutral-fluid turbulence is made, but the unique properties and problems of plasmas are emphasized throughout. Discussions are given of quasilinear theory, weak-turbulence theory, resonance-broadening theory, and the clump algorithm. Those are developed independently, then shown to be special cases of the direct-interaction approximation (DIA), which provides a central focus for the article. Various methods of renormalized perturbation theory are described, then unified with the aid of the generating-functional formalism of Martin, Siggia, and Rose. A general expression for the renormalized dielectric function is deduced and discussed in detail. Modern approaches such as decimation and PDF methods are described. Derivations of DIA-based Markovian closures are discussed. The eddy-damped quasinormal Markovian closure is shown to be nonrealizable in the presence of waves, and a new realizable Markovian closure is presented. The test-field model and a realizable modification thereof are also summarized. Numerical solutions of various closures for some plasma-physics paradigms are reviewed. The variational approach to bounds on transport is developed. Miscellaneous topics include Onsager symmetries for turbulence, the interpretation of entropy balances for both kinetic and fluid descriptions, self-organized criticality, statistical interactions between disparate scales, and the roles of both mean and random shear. Appendices are provided on Fourier transform conventions, dimensional and scaling analysis, the derivations of nonlinear gyrokinetic and gyrofluid equations, stochasticity criteria for quasilinear theory, formal aspects of resonance-broadening theory, Novikov's theorem, the treatment of weak inhomogeneity, the derivation of the Vlasov weak-turbulence wave kinetic equation from a fully renormalized description, some features of a code for solving the direct-interaction approximation and related Markovian closures, the details of the solution of the EDQNM closure for a solvable three-wave model, and the notation used in the article.

  1. Table 5.17 Strategic Petroleum Reserve, 1977-2011 (Thousand Barrels, Except as Noted)

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Strategic Petroleum Reserve, 1977-2011 (Thousand Barrels, Except as Noted) Year Foreign Crude Oil Receipts Domestic Crude Oil Receipts Withdrawals End-of-Year Stocks Days of Petroleum Net Imports 4 Imported by SPR Imported by Others 1,2 Purchases Exchanges 2 Sales Exchanges Quantity Percent of Crude Oil 3 Stocks Percent of Total Petroleum Stocks 1977 7,540 0 370 [5] 0 0 0 7,455 2.1 0.6 1 1978 58,798 0 0 0 0 0 66,860 17.8 5.2 8 1979 24,434 0 4 0 0 0 91,191 21.2 6.8 11 1980 16,067 0 1,296 0 0 0

  2. EPICS release 3.11 specific documentation -- EPICS release notes for 3.11

    SciTech Connect (OSTI)

    1994-01-19

    EPICS release 3.11 is now ready for user testing. A person who wants to set up a simplified application environment to boot an IOC and create databases using R3.11 should follow the directions in Appendix B, page 27, of the EPICS Source/Release Control Manual, Sept. 20, 1993. The R3.11 EPICS path at ANL/APS is /net/phebos/epics/R3.11 so the command to get the new release is /net/phebos/epics/R3.11/Unix/share/bin/getrel /net/phebos/epics/R3.11. An existing R3.8 short form report can be copied to this new directory and used to create a database. ANL/APS is currently testing an Application Developers Source/Release control system. It is not yet ready for general distribution. Attached are the EPICS R3.11 release notes.

  3. Meeting notes of the High Flux Isotope Reactor (HFIR) futures group

    SciTech Connect (OSTI)

    Houser, M.M.

    1995-08-01

    This report is a compilation of the notes from the ten meetings. The group charter is: (1) to identify and characterize the range of possibilities and necessities for keeping the HFIR operating for at least the next 15 years; (2) to identify and characterize the range of possibilities for enhancing the scientific and technical utility of the HFIR; (3) to evaluate the benefits or impacts of these possibilities on the various scientific fields that use the HFIR or its products; (4) to evaluate the benefits or impacts on the operation and maintenance of the HFIR facility and the regulatory requirements; (5) to estimate the costs, including operating costs, and the schedules, including downtime, for these various possibilities; and one possible impact of proposed changes may be to stimulate increased pressure for a reduced enrichment fuel for HFIR.

  4. Non-Linear Transmission Line (NLTL) Microwave Source Lecture Notes the United States Particle Accelerator School

    SciTech Connect (OSTI)

    Russell, Steven J.; Carlsten, Bruce E.

    2012-06-26

    We will quickly go through the history of the non-linear transmission lines (NLTLs). We will describe how they work, how they are modeled and how they are designed. Note that the field of high power, NLTL microwave sources is still under development, so this is just a snap shot of their current state. Topics discussed are: (1) Introduction to solitons and the KdV equation; (2) The lumped element non-linear transmission line; (3) Solution of the KdV equation; (4) Non-linear transmission lines at microwave frequencies; (5) Numerical methods for NLTL analysis; (6) Unipolar versus bipolar input; (7) High power NLTL pioneers; (8) Resistive versus reactive load; (9) Non-lineaer dielectrics; and (10) Effect of losses.

  5. Note: Nonpolar solute partial molar volume response to attractive interactions with water

    SciTech Connect (OSTI)

    Williams, Steven M.; Ashbaugh, Henry S.

    2014-01-07

    The impact of attractive interactions on the partial molar volumes of methane-like solutes in water is characterized using molecular simulations. Attractions account for a significant 20% volume drop between a repulsive Weeks-Chandler-Andersen and full Lennard-Jones description of methane interactions. The response of the volume to interaction perturbations is characterized by linear fits to our simulations and a rigorous statistical thermodynamic expression for the derivative of the volume to increasing attractions. While a weak non-linear response is observed, an average effective slope accurately captures the volume decrease. This response, however, is anticipated to become more non-linear with increasing solute size.

  6. Note: Development of ESS Bilbao's proton ion source: Ion Source Hydrogen Positive

    SciTech Connect (OSTI)

    Miracoli, R. Feuchtwanger, J.; Arredondo, I.; Belver, D.; Gonzalez, P. J.; Corres, J.; Djekic, S.; Echevarria, P.; Eguiraun, M.; Garmendia, N.; Muguira, L.

    2014-02-15

    The Ion Source Hydrogen positive is a 2.7 GHz off-resonance microwave discharge ion source. It uses four coils to generate an axial magnetic field in the plasma chamber around 0.1 T that exceeds the ECR resonance field. A new magnetic system was designed as a combination of the four coils and soft iron in order to increase the reliability of the source. The description of the simulations of the magnetic field and the comparison with the magnetic measurements are presented. Moreover, results of the initial commissioning of the source for extraction voltage until 50 kV will be reported.

  7. Nevada Test Site Environmental Report 2008 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy A. Wills

    2009-09-01

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  8. Nevada Test Site Environmental Report 2009, Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2010-09-13

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2009. Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  9. Nevada Test Site Environmental Report 2005, Attachment A - Site Description

    SciTech Connect (OSTI)

    Cathy A. Wills

    2006-10-01

    This appendix to the ''Nevada Test Site Environmental Report 2005'', dated October 2006 (DOE/NV/11718--1214; DOE/NV/25946--007) expands on the general description of the Nevada Test Site (NTS) presented in the Introduction. Included are subsections that summarize the site?s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This appendix complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  10. Nevada Test Site Environmental Report 2007 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills

    2008-09-01

    This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  11. Reference design description for a geologic repository: Revision 01

    SciTech Connect (OSTI)

    1997-09-01

    This document describes the current design expectations for a potential geologic repository that could be located at Yucca Mountain in Nevada. This Reference Design Description (RDD) looks at the surface and subsurface repository and disposal container design. Additionally, it reviews the expected long-term performance of the potential repository. In accordance with current legislation, the reference design for the potential repository does not include an interim storage option. The reference design presented allows the disposal of highly radioactive material received from government-owned spent fuel custodian sites; produces high-level waste sites, and commercial spent fuel sites. All design elements meet current federal, state, and local regulations governing the disposal of high-level radioactive waste and protection of the public and the environment. Due to the complex nature of developing a repository, the design will be created in three phases to support Viability Assessment, License Application, and construction. This document presents the current reference design. It will be updated periodically as the design progresses. Some of the details presented here may change significantly as more cost-effective solutions, technical advancements, or changes to requirements are identified.

  12. Environmental Compliance and Protection Program Description Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Bechtel Jacobs

    2009-02-26

    The objective of the Environmental Compliance and Protection (EC and P) Program Description (PD) is to establish minimum environmental compliance requirements and natural resources protection goals for the Bechtel Jacobs Company LLC (BJC) Oak Ridge Environmental Management Cleanup Contract (EMCC) Contract Number DE-AC05-98OR22700-M198. This PD establishes the work practices necessary to ensure protection of the environment during the performance of EMCC work activities on the US Department of Energy's (DOE's) Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee, by BJC employees and subcontractor personnel. Both BJC and subcontractor personnel are required to implement this PD. A majority of the decontamination and demolition (D and D) activities and media (e.g., soil and groundwater) remediation response actions at DOE sites on the ORR are conducted under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). CERCLA activities are governed by individual CERCLA decision documents (e.g., Record of Decision [ROD] or Action Memorandum) and according to requirements stated in the Federal Facility Agreement for the Oak Ridge Reservation (DOE 1992). Applicable or relevant and appropriate requirements (ARARs) for the selected remedy are the requirements for environmental remediation responses (e.g., removal actions and remedial actions) conducted under CERCLA.

  13. Preliminary paper - Development of the Reference Design Description for a geologic repository

    SciTech Connect (OSTI)

    Daniel, Russell B.; Rindskopf, M. Sam

    1997-11-20

    This report describes the current Reference Design Description (RDD) design expectations for a potential geologic repository that could be located at Yucca Mountain in Nevada.

  14. 2009-01 "Improved Description of Data in the Next Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Data in the Next Environmental Surveillance Report" 2009-01 "Improved Description of Data in the Next Environmental Surveillance Report" The intent of this recommendation ...

  15. Two-fluid description of wave-particle interactions in strong...

    Office of Scientific and Technical Information (OSTI)

    Title: Two-fluid description of wave-particle interactions in strong Buneman turbulence To understand the nature of anomalous resistivity in magnetic reconnection, we investigate ...

  16. Validity of ELTB Equation for Suitable Description of BEC

    SciTech Connect (OSTI)

    Kim, Dooyoung; Kim, Jinguanghao; Yoon, Jin-Hee

    2005-10-17

    The Bose-Einstein condensation (BEC) has been found for various alkali-metal gases such as 7Li, 87Rb, Na, and H. For the description of atoms in this condensate state, the Gross-Pitaevskii (GP) equation has been widely used. However, the GP equation contains the nonlinear term, which makes this equation hard to solve. Therefore, physical quantities are usually obtained numerically, and sometimes it is difficult to extract a physical meaning from the calculated results. The nuclear theory group at Purdue University in the U.S. developed a new simple equation, the equivalent linear two-body (ELTB) equation, using the hyper-radius coordinates and tested it for one-dimensional BEC system. Their results are consistent with the numerical values from the GP equation within 4.5%.We test the validity of the ELTB equation for three-dimensional BEC system by calculating the energies per particle and the wave functions for 87Rb gas and for 7Li gas. We use the quantum-mechanical variational method for the BEC energy. Our result for 87Rb gas agrees with a numerical calculation based on the GP equation, with a relative error of 12% over a wide range of N from 100 to 10,000. The relative distances between particles for 7Li gas are consistent within a relative error of 17% for N {<=} 1300. The relatively simple form of the ELTB equation, compared with the GP equation, enables us to treat the N-body system easily and efficiently. We conclude that the ELTB equation is a powerful equation for describing BEC system because it is easy to treat.

  17. D-Zero Central Calorimeter Pressure Vessel and Vacuum Vessel Safety Notes

    SciTech Connect (OSTI)

    Rucinski, R.; Luther, R.; /Fermilab

    1990-10-25

    The relief valve and relief piping capacity was calculated to be 908 sefm air. This exceeds all relieving conditions. The vessel also has a rupture disc with a 2640 scfm air stamped capacity. In order to significantly decrease the amount of time required to fill the cryostats, it is desired to raise the setpoint of the 'operating' relief valve on the argon storage dewar to 20 psig from its existing 16 psig setting. This additional pressure increases the flow to the cryostats and will overwhelm the relief capacity if the temperature of the modules within these vessels is warm enough. Using some conservative assumptions and simple calculations within this note, the maximum average temperature that the modules within each cryostat can be at prior to filling from the storage dewar with liquid argon is at least 290 K. The average temperature of the module mass for any of the three cryostats can be as high as 290 K prior to filling that particular cryostat. This should not be confused with the average temperature of a single type or location which is useful in protecting the modules-not necessarily the vessel itself. A few modules of each type and at different elevations should be used in an average which would account for the different weights of each module. Note that at 290 K, the actual flow of argon through the relief valve and the rupture disk was under the maximum theoretical flows for each relief device. This means that the bulk temperature could actually have been raised to flow argon through the reliefs at their maximum capacity. Therefore, the temperature of 290 K is a conservative value for the calculated flow rate of 12.3 gpm. Safeguards in addition to and used in conjunction with operating procedures shall be implemented in such a way so that the above temperature limitation is not exceeded and such that it is exclusive of the programmable logic controller (PLC). One suggestion is using a toggle switch for each cryostat mounted in the PLC I/O box which would maintain control of the signals to open the cold fill valves of each cryostat. With the safeguards in place while carefully monitoring the temperatures during a cooldown cycle in each cryostat, the set pressure in the argon storage dewar can safely be increased to 20 psig.

  18. Functional description for the Worldwide Port System (WPS) Regional Integrated Cargo Database (ICDB)

    SciTech Connect (OSTI)

    Truett, L.F.; Rollow, J.P.; Shipe, P.C.; Faby, E.Z.; Fluker, J.; Hancock, W.R.; Grubb, J.W.; Russell, D.L.; Ferguson, R.A.

    1995-12-15

    This Functional Description for the Worldwide Port System (WPS) Regional Integrated Cargo Database (ICDB) documents the purpose of and requirements for the ICDB in order to ensure a mutual understanding between the development group and the user group of the system. This Functional Description defines ICDB and provides a clear statement of the initial operational capability to be developed.

  19. Computer software design description for the integrated control and data acquisition system LDUA system

    SciTech Connect (OSTI)

    Aftanas, B.L.

    1998-08-12

    This Computer Software Design Description (CSDD) document provides the overview of the software design for all the software that is part of the integrated control and data acquisition system of the Light Duty Utility Arm System (LDUA). It describes the major software components and how they interface. It also references the documents that contain the detailed design description of the components.

  20. Technical Note: Modeling a complex micro-multileaf collimator using the standard BEAMnrc distribution

    SciTech Connect (OSTI)

    Kairn, T.; Kenny, J.; Crowe, S. B.; Fielding, A. L.; Franich, R. D.; Johnston, P. N.; Knight, R. T.; Langton, C. M.; Schlect, D.; Trapp, J. V.

    2010-04-15

    Purpose: The component modules in the standard BEAMnrc distribution may appear to be insufficient to model micro-multileaf collimators that have trifaceted leaf ends and complex leaf profiles. This note indicates, however, that accurate Monte Carlo simulations of radiotherapy beams defined by a complex collimation device can be completed using BEAMnrc's standard VARMLC component module. Methods: That this simple collimator model can produce spatially and dosimetrically accurate microcollimated fields is illustrated using comparisons with ion chamber and film measurements of the dose deposited by square and irregular fields incident on planar, homogeneous water phantoms. Results: Monte Carlo dose calculations for on-axis and off-axis fields are shown to produce good agreement with experimental values, even on close examination of the penumbrae. Conclusions: The use of a VARMLC model of the micro-multileaf collimator, along with a commissioned model of the associated linear accelerator, is therefore recommended as an alternative to the development or use of in-house or third-party component modules for simulating stereotactic radiotherapy and radiosurgery treatments. Simulation parameters for the VARMLC model are provided which should allow other researchers to adapt and use this model to study clinical stereotactic radiotherapy treatments.

  1. Baseline Concept Description of a Small Modular High Temperature Reactor

    SciTech Connect (OSTI)

    Hans Gougar

    2014-05-01

    The objective of this report is to provide a description of generic small modular high temperature reactors (herein denoted as an smHTR), summarize their distinguishing attributes, and lay out the research and development (R&D) required for commercialization. The generic concepts rely heavily on the modular high temperature gas-cooled reactor designs developed in the 1980s which were never built but for which pre-licensing or certification activities were conducted. The concept matured more recently under the Next Generation Nuclear Plant (NGNP) project, specifically in the areas of fuel and material qualification, methods development, and licensing. As all vendor-specific designs proposed under NGNP were all both small or medium-sized and modular by International Atomic Energy Agency (IAEA) and Department of Energy (DOE) standards, the technical attributes, challenges, and R&D needs identified, addressed, and documented under NGNP are valid and appropriate in the context of Small Modular Reactor (SMR) applications. Although the term High Temperature Reactor (HTR) is commonly used to denote graphite-moderated, thermal spectrum reactors with coolant temperatures in excess of 650oC at the core outlet, in this report the historical term High Temperature Gas-Cooled Reactor (HTGR) will be used to distinguish the gas-cooled technology described herein from its liquid salt-cooled cousin. Moreover, in this report it is to be understood that the outlet temperature of the helium in an HTGR has an upper limit of 950 degrees C which corresponds to the temperature to which certain alloys are currently being qualified under DOEs ARC program. Although similar to the HTGR in just about every respect, the Very High Temperature Reactor (VHTR) may have an outlet temperature in excess of 950 degrees C and is therefore farther from commercialization because of the challenges posed to materials exposed to these temperatures. The VHTR is the focus of R&D under the Generation IV program and its specific R&D needs will be included in this report when appropriate for comparison. The distinguishing features of the HTGR are the refractory (TRISO) coated particle fuel, the low-power density, graphite-moderated core, and the high outlet temperature of the inert helium coolant. The low power density and fuel form effectively eliminate the possibility of core melt, even upon a complete loss of coolant pressure and flow. The graphite, which constitutes the bulk of the core volume and mass, provides a large thermal buffer that absorbs fission heat such that thermal transients occur over a timespan of hours or even days. As chemically-inert helium is already a gas, there is no coolant temperature or void feedback on the neutronics and no phase change or corrosion product that could degrade heat transfer. Furthermore, the particle coatings and interstitial graphite retain fission products such that the source terms at the plant boundary remain well below actionable levels under all anticipated nominal and off-normal operating conditions. These attributes enable the reactor to supply process heat to a collocated industrial plant with negligible risk of contamination and minimal dynamic coupling of the facilities (Figure 1). The exceptional retentive properties of coated particle fuel in a graphite matrix were first demonstrated in the DRAGON reactor, a European research facility that began operation in 1964.

  2. Description of Transmutation Library for Fuel Cycle System Analyses

    SciTech Connect (OSTI)

    Steven J. Piet; Samuel E. Bays; Edward A. Hoffman

    2010-08-01

    This report documents the Transmutation Library that is used in Fuel Cycle System Analyses. This version replaces the 2008 version.[Piet2008] The Transmutation Library has the following objectives: • Assemble past and future transmutation cases for system analyses. • For each case, assemble descriptive information such as where the case was documented, the purpose of the calculation, the codes used, source of feed material, transmutation parameters, and the name of files that contain raw or source data. • Group chemical elements so that masses in separation and waste processes as calculated in dynamic simulations or spreadsheets reflect current thinking of those processes. For example, the CsSr waste form option actually includes all Group 1A and 2A elements. • Provide mass fractions at input (charge) and output (discharge) for each case. • Eliminate the need for either “fission product other” or “actinide other” while conserving mass. Assessments of waste and separation cannot use “fission product other” or “actinide other” as their chemical behavior is undefined. • Catalog other isotope-specific information in one place, e.g., heat and dose conversion factors for individual isotopes. • Describe the correlations for how input and output compositions change as a function of UOX burnup (for LWR UOX fuel) or fast reactor (FR) transuranic (TRU) conversion ratio (CR) for either FR-metal or FR-oxide. This document therefore includes the following sections: • Explanation of the data set information, i.e., the data that describes each case. In no case are all of the data presented in the Library included in previous documents. In assembling the Library, we return to raw data files to extract the case and isotopic data, into the specified format. • Explanation of which isotopes and elements are tracked. For example, the transition metals are tracked via the following: two Zr isotopes, Zr-other, Tc99, Tc-other, two Mo-Ru-Rh-Pd isotopes, Mo-Ru-Rh-Pd-other, four other specific TM isotopes, and TM-other. Mo-Ru-Rh-Pd are separated because their content constrains the loading of waste in glass, so we have to know the mass of those elements independent of others. • Rules for collapsing long lists of isotopes (~1000) to the 81 items in the library. For each tracked isotope, we define which short-lived isotopes’ mass (at t=0) is included with the mass of the tracked isotope at t=0, which short-lived radioactive progeny must be accounted for when the tracked isotope decays, and to which of the other 80 items the mass of the tracked isotope goes when it decays. • Explanation of where raw data files can be found on the fuel cycle data portal. • Explanation of generic cross section sets • Explanation of isotope-specific parameters such as heat and dose conversion factors • Explanation of the LWR UOX burnup and FR TRU CR correlations.

  3. Baseline Concept Description of a Small Modular High Temperature Reactor

    SciTech Connect (OSTI)

    Gougar, Hans D.

    2014-10-01

    The objective of this report is to provide a description of generic small modular high temperature reactors (herein denoted as an smHTR), summarize their distinguishing attributes, and lay out the research and development (R&D) required for commercialization. The generic concepts rely heavily on the modular high temperature gas-cooled reactor designs developed in the 1980s which were never built but for which pre-licensing or certification activities were conducted. The concept matured more recently under the Next Generation Nuclear Plant (NGNP) project, specifically in the areas of fuel and material qualification, methods development, and licensing. As all vendor-specific designs proposed under NGNP were all both ‘small’ or medium-sized and ‘modular’ by International Atomic Energy Agency (IAEA) and Department of Energy (DOE) standards, the technical attributes, challenges, and R&D needs identified, addressed, and documented under NGNP are valid and appropriate in the context of Small Modular Reactor (SMR) applications. Although the term High Temperature Reactor (HTR) is commonly used to denote graphite-moderated, thermal spectrum reactors with coolant temperatures in excess of 650oC at the core outlet, in this report the historical term High Temperature Gas-Cooled Reactor (HTGR) will be used to distinguish the gas-cooled technology described herein from its liquid salt-cooled cousin. Moreover, in this report it is to be understood that the outlet temperature of the helium in an HTGR has an upper limit of 950 degrees C which corresponds to the temperature to which certain alloys are currently being qualified under DOE’s ARC program. Although similar to the HTGR in just about every respect, the Very High Temperature Reactor (VHTR) may have an outlet temperature in excess of 950 degrees C and is therefore farther from commercialization because of the challenges posed to materials exposed to these temperatures. The VHTR is the focus of R&D under the Generation IV program and its specific R&D needs will be included in this report when appropriate for comparison. The distinguishing features of the HTGR are the refractory (TRISO) coated particle fuel, the low-power density, graphite-moderated core, and the high outlet temperature of the inert helium coolant. The low power density and fuel form effectively eliminate the possibility of core melt, even upon a complete loss of coolant pressure and flow. The graphite, which constitutes the bulk of the core volume and mass, provides a large thermal buffer that absorbs fission heat such that thermal transients occur over a timespan of hours or even days. As chemically-inert helium is already a gas, there is no coolant temperature or void feedback on the neutronics and no phase change or corrosion product that could degrade heat transfer. Furthermore, the particle coatings and interstitial graphite retain fission products such that the source terms at the plant boundary remain well below actionable levels under all anticipated nominal and off-normal operating conditions. These attributes enable the reactor to supply process heat to a collocated industrial plant with negligible risk of contamination and minimal dynamic coupling of the facilities (Figure 1). The exceptional retentive properties of coated particle fuel in a graphite matrix were first demonstrated in the DRAGON reactor, a European research facility that began operation in 1964.

  4. Baseline Concept Description of a Small Modular High Temperature Reactor

    SciTech Connect (OSTI)

    Hans Gougar

    2014-05-01

    The objective of this report is to provide a description of generic small modular high temperature reactors (herein denoted as an smHTR), summarize their distinguishing attributes, and lay out the research and development (R&D) required for commercialization. The generic concepts rely heavily on the modular high temperature gas-cooled reactor designs developed in the 1980s which were never built but for which pre-licensing or certification activities were conducted. The concept matured more recently under the Next Generation Nuclear Plant (NGNP) project, specifically in the areas of fuel and material qualification, methods development, and licensing. As all vendor-specific designs proposed under NGNP were all both ‘small’ or medium-sized and ‘modular’ by International Atomic Energy Agency (IAEA) and Department of Energy (DOE) standards, the technical attributes, challenges, and R&D needs identified, addressed, and documented under NGNP are valid and appropriate in the context of Small Modular Reactor (SMR) applications. Although the term High Temperature Reactor (HTR) is commonly used to denote graphite-moderated, thermal spectrum reactors with coolant temperatures in excess of 650oC at the core outlet, in this report the historical term High Temperature Gas-Cooled Reactor (HTGR) will be used to distinguish the gas-cooled technology described herein from its liquid salt-cooled cousin. Moreover, in this report it is to be understood that the outlet temperature of the helium in an HTGR has an upper limit of 950 degrees C which corresponds to the temperature to which certain alloys are currently being qualified under DOE’s ARC program. Although similar to the HTGR in just about every respect, the Very High Temperature Reactor (VHTR) may have an outlet temperature in excess of 950 degrees C and is therefore farther from commercialization because of the challenges posed to materials exposed to these temperatures. The VHTR is the focus of R&D under the Generation IV program and its specific R&D needs will be included in this report when appropriate for comparison. The distinguishing features of the HTGR are the refractory (TRISO) coated particle fuel, the low-power density, graphite-moderated core, and the high outlet temperature of the inert helium coolant. The low power density and fuel form effectively eliminate the possibility of core melt, even upon a complete loss of coolant pressure and flow. The graphite, which constitutes the bulk of the core volume and mass, provides a large thermal buffer that absorbs fission heat such that thermal transients occur over a timespan of hours or even days. As chemically-inert helium is already a gas, there is no coolant temperature or void feedback on the neutronics and no phase change or corrosion product that could degrade heat transfer. Furthermore, the particle coatings and interstitial graphite retain fission products such that the source terms at the plant boundary remain well below actionable levels under all anticipated nominal and off-normal operating conditions. These attributes enable the reactor to supply process heat to a collocated industrial plant with negligible risk of contamination and minimal dynamic coupling of the facilities (Figure 1). The exceptional retentive properties of coated particle fuel in a graphite matrix were first demonstrated in the DRAGON reactor, a European research facility that began operation in 1964.

  5. RELAP5 Model Description and Validation for the BR2 Loss-of-Flow Experiments

    SciTech Connect (OSTI)

    Licht, J. R.; Dionne, B.; Van den Branden, G.; Sikik, E.; Koonen, E.

    2015-07-01

    This paper presents a description of the RELAP5 model, the calibration method used to obtain the minor loss coefficients from the available hydraulic data and the LOFA simulation results compared to the 1963 experimental tests for HEU fuel.

  6. ORISE Contract, PART I … THE SCHEDULE, Section C Description/Specifications/Work Statement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PART I - THE SCHEDULE SECTION C DESCRIPTION/SPECIFICATIONS/WORK STATEMENT C.1 PERFORMANCE WORK STATEMENT (NOV 2004) ................................................... 3 1.0 SCOPE............................................................................................................................... 3 2.0 PERFORMANCE WORK STATEMENT OBJECTIVES .......................................... 4 3.0 RELATED SERVICES (NOV 2004)

  7. Attachment A: Site Description Nevada National Security Site Environmental Report 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment A: Site Description Nevada National Security Site Environmental Report 2014 ATT-A-i Table of Contents List of Figures ....................................................................................................................................................... A-ii List of Tables ......................................................................................................................................................... A-ii Acronyms and Abbreviations

  8. NDMAS System and Process Description (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Technical Report: NDMAS System and Process Description Citation Details In-Document Search Title: NDMAS System and Process Description Experimental data generated by the Very High Temperature Reactor Program need to be more available to users in the form of data tables on Web pages that can be downloaded to Excel or in delimited text formats that can be used directly for input to analysis and simulation codes, statistical packages, and graphics software. One solution that can provide current and

  9. NDMAS System and Process Description (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Technical Report: NDMAS System and Process Description Citation Details In-Document Search Title: NDMAS System and Process Description × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this document is also available for sale to the

  10. NAICS Codes @ Headquarters Description: NAICS Codes used at Headquarters Procurement Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NAICS Codes @ Headquarters Description: NAICS Codes used at Headquarters Procurement Services Filters: Signed Date only show values between , Contracting Agency ID show only ('8900'), Contracting Office ID show only ('00001'), Date Signed only show values between '05/01/2011' and '04/30/2012', Last Modified Date only show values between Contracting Agency ID: 8900, Contracting Office ID: 00001 NAICS Code NAICS Description Action Obligation 541519 OTHER COMPUTER RELATED SERVICES 341

  11. Two-fluid description of wave-particle interactions in strong Buneman

    Office of Scientific and Technical Information (OSTI)

    turbulence (Journal Article) | SciTech Connect Two-fluid description of wave-particle interactions in strong Buneman turbulence Citation Details In-Document Search Title: Two-fluid description of wave-particle interactions in strong Buneman turbulence To understand the nature of anomalous resistivity in magnetic reconnection, we investigate turbulence-induced momentum transport and energy dissipation while a plasma is unstable to the Buneman instability in force-free current sheets. Using 3D

  12. Health, Safety & Environment System Description and Worker Safety & Health Program

    National Nuclear Security Administration (NNSA)

    FY2015 HEALTH, SAFETY AND ENVIRONMENT MANAGEMENT SYSTEM DESCRIPTION and WORKER SAFETY & HEALTH PROGRAM Honeywell Federal Manufacturing & Technologies HS&E Management System Description 1 Honeywell Approval: KCFO Approval: Original Signed by Don Fitzpatrick 8/27/14 Original Signed by Sherry Kinsey-Cannon 8/27/14 Donald J. Fitzpatrick, Director Date Sherry Kinsey-Cannon, Date HSE&F Acting Assistant Manager Office of Operations KCFO Worker Safety & Health Program 2 Honeywell

  13. Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use Calibri, 12 point font for this memorandum.) (Effective April 2014) MEMORANDUM FOR: XXXXXXXXXXXXXXXX ASSOCIATE ADMINISTRATOR FOR MANAGEMENT AND BUDGET THROUGH: INGRID KOLB DIRECTOR, OFFICE OF MANAGEMENT FROM: XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX SUBJECT: Request to Reactivate Directive Currently on Hold PURPOSE: The purpose of this memorandum is to request the Directives

  14. Summary Notes from 22 July 2008 Generic Technical Issue Discussion on Long-Term Engineered Cap Performance

    Office of Environmental Management (EM)

    6 Summary Notes from 22 July 2008 Generic Technical Issue Discussion on Long-Term Engineered Cap Performance Attendees: Representatives from the U.S. Department of Energy (DOE)-Headquarters and the U.S. Nuclear Regulatory Commission (NRC) staff met at the DOE offices in Germantown, Maryland on 22 July 2008. Representatives from South Carolina Department of Health and Environmental Control, DOE-Savannah River, and DOE- Office of River Protection participated in the meeting via a teleconference

  15. Summary Notes from 28 May 2008 Generic Technical Issue Discussion on Estimating Waste Inventory and Waste Tank Characterization

    Office of Environmental Management (EM)

    8, 2008 Page 1 of 8 Summary Notes from 28 May 2008 Generic Technical Issue Discussion on Estimating Waste Inventory and Waste Tank Characterization Attendees: Representatives from Department of Energy-Headquarters (DOE-HQ) and the U.S. Nuclear Regulatory Commission staff (NRC) met at the DOE offices in Germantown, Maryland on 28 May 2008. Representatives from Department of Energy- Savannah River (DOE-SR), Department of Energy-Richland (DOE-RL), and Department of Energy-River Protection (DOE-ORP)

  16. Advances in the ab initio description of nuclear three-cluster systems

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Advances in the ab initio description of nuclear three-cluster systems Citation Details In-Document Search Title: Advances in the ab initio description of nuclear three-cluster systems Authors: Redondo, C R ; Quaglioni, S ; Navratil, P ; Hupin, G Publication Date: 2015-08-25 OSTI Identifier: 1234622 Report Number(s): LLNL-PROC-676587 DOE Contract Number: AC52-07NA27344 Resource Type: Conference Resource Relation: Conference: Presented at: 21st International

  17. Advances in the ab initio description of nuclear three-cluster systems

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Advances in the ab initio description of nuclear three-cluster systems Citation Details In-Document Search Title: Advances in the ab initio description of nuclear three-cluster systems × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy

  18. Microsoft PowerPoint - Final_IIP NOPR PubWorkshop Presentation_NoNotes_3-22-2016

    Energy Savers [EERE]

    Interagency Pre-Application (IIP) Process Notice of Proposed Rulemaking Public Workshop Meghan Conklin, Julie Smith, and Lynn Alexander March 22, 2016 2 Agenda * Introduction * Background of Integrated Interagency Pre- application (IIP) Process * Description of Proposed Rule and IIP Process * Next Steps * Questions and Comments on Proposed Rule 3 How to Participate * Chat Panel - Send a message to all panelists * Include your full name and organization * Q&A Panel - Submit your question

  19. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    competition that tests students' knowledge in all areas of science and mathematics. ... students to excel in mathematics and science and to pursue careers in these fields. ...

  20. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mathematics throughout the United States. MATHCOUNTS is supported by the National Society of Professional Engineers (NSPE), The National Council of Teachers of Mathematics and ...

  1. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL projects and propose innovative future projects. They apply creativity and critical thinking skills as they visualize their own ideas through posters, videos, apps or essays...

  2. Partnership Description

    Broader source: Energy.gov [DOE]

    The Department of Energy (DOE) is establishing a voluntary partnership program, the Partnership for Energy Sector Climate Resilience (Partnership), between energy companies and DOE. The focus of this Partnership will be to enhance energy security by collaborating with the private sector to establish a 21st century energy system resilient to extreme weather and climate change.

  3. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    interactive and fun engineering, science, math, and technology demonstrations for K-12 ... basic engineering, science, technology and math principles that may include robots, ...

  4. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    E (Engineering) is an evening of interesting, interactive and fun engineering, science, math, and technology demonstrations for K-12 students and their parents or guardians. It is...

  5. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SciTech Connect Program Benefits of Individual EERE Programs. FY 2010 Citation Details In-Document Search Title: Program Benefits of Individual EERE Programs. FY 2010 This collection of data tables shows the benefits metrics related to energy security, environmental impacts, and economic impacts for individual renewable energy technologies in the EERE portfolio. Data are presented for the years 2015, 2020, 2030, and 2050, for both the NEMS and MARKAL models. Authors: None, None Publication

  6. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research....

  7. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    their potential and pursue opportunities in science, technology, engineering and mathematics. Through Expanding Your Horizon (EYH) Network programs, we provide STEM role models...

  8. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of MATHCOUNTS is to increase enthusiasm for and enhance achievement in middle school mathematics throughout the United States. MATHCOUNTS is supported by the National Society of...

  9. Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    academic competition that tests students' knowledge in all areas of science and mathematics. Middle and high school student teams from diverse backgrounds are comprised of...

  10. EMS Description

    Broader source: Energy.gov [DOE]

    This document describes the joint U.S. Department of Energy (DOE) Office of Legacy Management (LM) and the Legacy Management Support (LMS) Contractor Team Environmental Management System (EMS).

  11. Alternative descriptions of catalyst deactivation in aromatization of propane and butane

    SciTech Connect (OSTI)

    Koshelev, Yu.N.; Vorob`ev, B.L.; Khvorova, E.P.

    1995-08-20

    Deactivation of a zeolite-containing catalyst has been studied in aromatization of propane and butane. Various descriptions of the dependence of the alkane conversion on the coke concentration on the catalyst have been considered, and using a statistical method of estimating the model validity, the most preferable form of the deactivation function has been proposed.

  12. SPEAR-BETA fuel performance code system. Volume 1. General description. Final report. [BWR; PWR

    SciTech Connect (OSTI)

    Christensen, R.

    1982-04-01

    This document provides a general description of the SPEAR-BETA fuel reliability code system. Included is a discussion of the methodology employed and the structure of the code system, as well as discussion of the major components: the data preparation routines, the mechanistic fuel performance model, the mechanistic cladding failure model, and the statistical failure model.

  13. TPX: Contractor preliminary design review. Volume 1, Presentation and design description. Final report

    SciTech Connect (OSTI)

    Hartman, D.; Naumovich,; Walstrom, P.; Clarkson, I.; Schultheiss, J.; Burger, A.

    1995-09-22

    This first volume of the five volume set begins with a CPDR overview and then details the PF magnet system, manufacturing R&D, Westinghouse R&D, the central solenoid, the PF 5 ring coil, the PF 6/7 ring coil, quality assurance, and the system design description.

  14. Implementation of a hybrid particle code with a PIC description in r–z and a gridless description in ϕ into OSIRIS

    SciTech Connect (OSTI)

    Davidson, A.; Tableman, A.; An, W.; Tsung, F.S.; Lu, W.; Vieira, J.; Silva, L.O.

    2015-01-15

    For many plasma physics problems, three-dimensional and kinetic effects are very important. However, such simulations are very computationally intensive. Fortunately, there is a class of problems for which there is nearly azimuthal symmetry and the dominant three-dimensional physics is captured by the inclusion of only a few azimuthal harmonics. Recently, it was proposed [1] to model one such problem, laser wakefield acceleration, by expanding the fields and currents in azimuthal harmonics and truncating the expansion. The complex amplitudes of the fundamental and first harmonic for the fields were solved on an r–z grid and a procedure for calculating the complex current amplitudes for each particle based on its motion in Cartesian geometry was presented using a Marder's correction to maintain the validity of Gauss's law. In this paper, we describe an implementation of this algorithm into OSIRIS using a rigorous charge conserving current deposition method to maintain the validity of Gauss's law. We show that this algorithm is a hybrid method which uses a particles-in-cell description in r–z and a gridless description in ϕ. We include the ability to keep an arbitrary number of harmonics and higher order particle shapes. Examples for laser wakefield acceleration, plasma wakefield acceleration, and beam loading are also presented and directions for future work are discussed.

  15. Advanced Neutron Source Dynamic Model (ANSDM) code description and user guide

    SciTech Connect (OSTI)

    March-Leuba, J.

    1995-08-01

    A mathematical model is designed that simulates the dynamic behavior of the Advanced Neutron Source (ANS) reactor. Its main objective is to model important characteristics of the ANS systems as they are being designed, updated, and employed; its primary design goal, to aid in the development of safety and control features. During the simulations the model is also found to aid in making design decisions for thermal-hydraulic systems. Model components, empirical correlations, and model parameters are discussed; sample procedures are also given. Modifications are cited, and significant development and application efforts are noted focusing on examination of instrumentation required during and after accidents to ensure adequate monitoring during transient conditions.

  16. Microscopic description of the pygmy dipole resonance and its contribution to radiative capture

    SciTech Connect (OSTI)

    Avdeyenkov, A.; Goriely, S.; Kamerdzhiev, S.; Tertychny, G.

    2009-01-28

    The radiative capture cross sections for the compound nuclei {sup 100}Sn, {sup 132}Sn and {sup 144}Nd have been calculated using both self-consistent and non-selfconsistent microscopic theories which, in addition to the standard RPA or QRPA approaches, take the single-particle continuum and phonon coupling into account. We show that the inclusion of the phonon coupling is necessary for a proper description of the pygmy resonance. Consequently, the radiative capture cross sections and corresponding rates are increased by a factor of 2-3 as compared with RPA or QRPA approaches. We conclude that the present approach provides a more complete and coherent description of the {gamma}-ray strength function than the previous models used so far and for astrophysics applications in particular, such calculations are highly recommended for a more reliable estimate of the electromagnetic properties of exotic nuclei.

  17. Spent nuclear fuel project cold vacuum drying facility vacuum and purge system design description

    SciTech Connect (OSTI)

    IRWIN, J.J.

    1998-11-30

    This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Vacuum and Purge System (VPS) . The SDD was developed in conjunction with HNF-SD-SNF-SAR-O02, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), The HNF-SD-SNF-DRD-002, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the VPS equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SDD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

  18. Descriptions of selected accidents that have occurred at nuclear reactor facilities

    SciTech Connect (OSTI)

    Bertini, H.W.

    1980-04-01

    This report was prepared at the request of the President's Commission on the Accident at Three Mile Island to provide the members of the Commission with some insight into the nature and significance of accidents that have occurred at nuclear reactor facilities in the past. Toward that end, this report presents a brief description of 44 accidents which have occurred throughout the world and which meet at least one of the severity criteria that were established.

  19. HQ State HQ City Primary Awardee Brief Project Description Project Locations

    Energy Savers [EERE]

    Primary Awardee Brief Project Description Project Locations Recovery Act Funding* Participant Share Total Project Value Including Cost Share Los Angeles Los Angeles Department of Water and Power Implement a smart grid demonstration at university campus properties and technology transfer laboratories to establish a fully-integrated Smart Grid system and suite of technologies as applied to demand response, conduct a comprehensive portfolio of behavioral studies, demonstrate next- generation cyber

  20. SustainX Inc Isothermal Compressed Air Energy Storage Project Description

    Energy Savers [EERE]

    SustainX Inc Isothermal Compressed Air Energy Storage Project Description SustainX is developing and demonstrating a modular, market-ready energy storage system that uses compressed air as the storage medium. SustainX uses a crankshaft-based drivetrain to convert electrical energy into potential energy stored as compressed air. SustainX's ICAES system captures the heat from compression in water and stores the captured heat until it is needed again for expansion. Storing the captured heat

  1. NREL: Regional Energy Deployment System (ReEDS) Model - Model Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Qualitative Model Description The Regional Energy Deployment System (ReEDS) is a long-term capacity-expansion model for the deployment of electric power generation technologies and transmission infrastructure throughout the contiguous United States. Developed by the National Renewable Energy Laboratory's (NREL's) Strategic Energy Analysis Center (SEAC) with support from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy, ReEDS is designed to analyze critical issues

  2. NREL: dGen: Distributed Generation Market Demand Model - Model Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Model Description A map of the continental United States showing a range of color based on available photovoltaic solar resources for using flat plate tilted at latitude. The highest intensity is through the southwestern states and the lowest being through the Great Lakes region and northeastern states. Enlarge image A map of the United States showing a range of color based on the annual gross capacity factor. The states along the Rocky Mountains out to the Mississippi River show the highest

  3. Simple description of light W, Os, and Pt nuclei in the interacting boson model

    SciTech Connect (OSTI)

    McCutchan, E.A.; Zamfir, N.V.

    2005-05-01

    A simple, two-parameter IBA-1 Hamiltonian is applied to light W, Os, and Pt nuclei with N {<=} 104. Equal emphasis is placed on fitting all low-lying positive parity excitations resulting in a good description of energy levels and electromagnetic transition rates. A mapping of these parameters into the IBA symmetry triangle finds that these nuclei lie rather central in the triangle and close to the phase transition region of the IBA model.

  4. New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Mexico Hydrogen Fuels Challenge Program Description The New Mexico Hydrogen Fuels Challenge is an event that provides a hands-on opportunity for middle school students (grades six through eight) to understand the need for renewable energy sources and explore the emerging technology of hydrogen power. It is also an opportunity to engage the future generation of engineers and scientists. Los Alamos National Laboratory is a co-sponsor of the annual regional event along with the Public Service

  5. System Description for the KW Basin Integrated Water Treatment System (IWTS) (70.3)

    SciTech Connect (OSTI)

    DERUSSEAU, R.R.

    2000-04-18

    This is a description of the system that collects and processes the sludge and radioactive ions released by the spent nuclear fuel (SNF) processing operations conducted in the 105 KW Basin. The system screens, settles, filters, and conditions the basin water for reuse. Sludge and most radioactive ions are removed before the water is distributed back to the basin pool. This system is part of the Spent Nuclear Fuel Project (SNFP).

  6. Note on gravitational baryogenesis

    SciTech Connect (OSTI)

    Sadjadi, H. Mohseni

    2007-12-15

    The coupling between Ricci scalar curvature and the baryon number current dynamically breaks CPT in an expanding universe and leads to baryon asymmetry. We study the effect of time dependence of the equation of state parameter of the Friedmann-Robertson-Walker universe on this asymmetry.

  7. Notes and Action Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rick Kendall, Tom Kitchens, Horst Simon SubCommittee on Visualization and Graphics Software Responsibility: JN Leboeuf, Judy Giarrusso, Steve Jardin, and Steve Lau Actions:...

  8. Notes and Definitions

    Weekly Natural Gas Storage Report (EIA)

    Oklahoma, and Texas Mountain Region Arizona, Colorado, Idaho, Montana, Nebraska, New Mexico, Nevada, North Dakota, South Dakota, Utah, and Wyoming Pacific Region California,...

  9. Manhattan Project: Potsdam Note

    Office of Scientific and Technical Information (OSTI)

    Potsdam, July 19, 1945 (Truman wrote the above on the back of this). Click on a link below to return to: Espionage and the Manhattan Project, 1940-1945 Library Potsdam and the ...

  10. Notes and Action Items

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    three issues at the NUGEX business meeting. We were able to add Ricky Kendall to the elections committee, which is then Bas Braams, David Dean, Brian Hingerty, Ricky Kendall, Mike...

  11. ALARA notes, Number 8

    SciTech Connect (OSTI)

    Khan, T.A.; Baum, J.W.; Beckman, M.C.

    1993-10-01

    This document contains information dealing with the lessons learned from the experience of nuclear plants. In this issue the authors tried to avoid the `tyranny` of numbers and concentrated on the main lessons learned. Topics include: filtration devices for air pollution abatement, crack repair and inspection, and remote handling equipment.

  12. Meeting Notes and Presentations

    Office of Environmental Management (EM)

    Tele-Conference - February 22, 2010 2 of 2 Approach for Remaining Focus Areas: Robert Murray presented a proposed approach to divide the remaining focus areas into three...

  13. Notes for Greenbook Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    wrote it * Difficult to extract requirements * Needed to be "more even" tech edited * Latex is not immediately compatible with web-based text * Too complex for non-involved *...

  14. Appendix A Explanatory Notes

    U.S. Energy Information Administration (EIA) Indexed Site

    April 2016 100 U.S. Energy Information Administration | Natural Gas Monthly Dakota, Ohio, Pennsylvania, Utah, and West Virginia) were added to the EIA-914 data collection and are reported individually. The remaining states/areas (Alabama, Arizona, Federal Offshore Pacific, Florida, Illinois, Indiana, Kentucky, Maryland, Michigan, Mississippi, Missouri, Nebraska, Nevada, New York, Oregon, South Dakota, Tennessee, and Virginia) are grouped in the "Other States" category. The sum of

  15. Appendix A Explanatory Notes

    U.S. Energy Information Administration (EIA) Indexed Site

  16. Table 2.4 Household Energy Consumption by Census Region, Selected Years, 1978-2009 (Quadrillion Btu, Except as Noted)

    U.S. Energy Information Administration (EIA) Indexed Site

    Household 1 Energy Consumption by Census Region, Selected Years, 1978-2009 (Quadrillion Btu, Except as Noted) Census Region 2 1978 1979 1980 1981 1982 1984 1987 1990 1993 1997 2001 2005 2009 United States Total (does not include wood) 10.56 9.74 9.32 9.29 8.58 9.04 9.13 9.22 10.01 10.25 9.86 10.55 10.18 Natural Gas 5.58 5.31 4.97 5.27 4.74 4.98 4.83 4.86 5.27 5.28 4.84 4.79 4.69 Electricity 3 2.47 2.42 2.48 2.42 2.35 2.48 2.76 3.03 3.28 3.54 3.89 4.35 4.39 Distillate Fuel Oil and Kerosene 2.19

  17. Source: U.S. Energy Information Administration, Form EIA-63B, 'Annual Photovoltaic Cell/Module Shipments Report' Note: Dollars are not

    U.S. Energy Information Administration (EIA) Indexed Site

    modules $3,754,813 Total modules $0.75 Table 2. Value and average value of photovoltaic module shipments, 2013 Module value, total shipments (thousand dollars) Module average value (dollars per peak watt) Source: U.S. Energy Information Administration, Form EIA-63B, 'Annual Photovoltaic Cell/Module Shipments Report' Note: Dollars are not adjusted for inflation.

  18. Two-band description of resonant superfluidity in atomic Fermi gases

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    He, Lianyi; Hu, Hui; Liu, Xia -Ji

    2015-02-23

    Fermionic superfluidity in atomic Fermi gases across a Feshbach resonance is normally described by the atom-molecule theory, which treats the closed channel as a noninteracting point boson. In this work we present a theoretical description of the resonant superfluidity in analogy to the two-band superconductors. We employ the underlying two-channel scattering model of Feshbach resonance where the closed channel is treated as a composite boson with binding energy ε0 and the resonance is triggered by the microscopic interchannel coupling U12. The binding energy ε0 naturally serves as an energy scale of the system, which has been sent to infinity inmore » the atom-molecule theory. We show that the atom-molecule theory can be viewed as a leading-order low-energy effective theory of the underlying fermionic theory in the limit ε0→∞ and U12→0, while keeping the phenomenological atom-molecule coupling finite. The resulting two-band description of the superfluid state is in analogy to the BCS theory of two-band superconductors. In the dilute limit ε0→∞, the two-band description recovers precisely the atom-molecule theory. The two-band theory provides a natural approach to study the corrections because of a finite binding energy ε0 in realistic experimental systems. For broad and moderate resonances, the correction is not important for current experimental densities. However, for extremely narrow resonance, we find that the correction becomes significant. Lastly, the finite binding energy correction could be important for the stability of homogeneous polarized superfluid against phase separation in imbalanced Fermi gases across a narrow Feshbach resonance.« less

  19. Shell Model Description of the Odd-Odd Co and Cu Nuclei

    SciTech Connect (OSTI)

    Medina, N. H.; Allegro, P. R. P.; Oliveira, J. R. B. de; Ribas, R. V.; Seale, W. A.; Toufen, D. L.; Silveira, M. A. G.

    2007-10-26

    The known excited states of the odd-odd nuclei {sup 54,56,58,60}Co and 60,62,64,66Cu were interpreted in the framework of the large scale shell model (LSSM), using several effective interactions and configuration spaces. For the description of the negative parity states, we have allowed one particle excitation to the g{sub 9/2} orbital. The LSSM using the GXPF1 effective interaction reproduces well the first excited states in all of these nuclei.

  20. 10 CFR 851 Worker Safety and Health Program (WSHP) Description Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Oak Ridge Operations P.O. Box 2001 Oak Ridge, Tennessee 37831- May 2 2, 20 0 7 Dr. Ronald D. Townsend, Director Oak Ridge Institute for Science and Education Mai! Stop 22 Post Office Box I 17 Oak Ridge, Tennessee 37831-0117 Dear Dr. Townsend: CONTRACT NO. DEAC05-06OR23100, OAK RIDGE INSTITUTE FOR SCIENCE AND EDUCATION (ORISE) 10 CFR 851 WORKER SAFETY AND HEALTH PROGRAM (WSHP) DESCRIPTION DOCUMENT The ORISE WSHP submitted to us on February 26, 2007, was evaluated to provide reasonable assurance

  1. Application of fractal theory in refined reservoir description for EOR pilot area

    SciTech Connect (OSTI)

    Yue Li; Yonggang Duan; Yun Li; Yuan Lu

    1997-08-01

    A reliable reservoir description is essential to investigate scenarios for successful EOR pilot test. Reservoir characterization includes formation composition, permeability, porosity, reservoir fluids and other petrophysical parameters. In this study, various new tools have been applied to characterize Kilamayi conglomerate formation. This paper examines the merits of various statistical methods for recognizing rock property correlation in vertical columns and gives out methods to determine fractal dimension including R/S analysis and power spectral analysis. The paper also demonstrates that there is obvious fractal characteristics in conglomerate reservoirs of Kilamayi oil fields. Well log data in EOR pilot area are used to get distribution profile of parameters including permeability, porosity, water saturation and shale content.

  2. A statistical description of the types and severities of accidents involving tractor semi-trailers

    SciTech Connect (OSTI)

    Clauss, D.B.; Wilson, R.K.; Blower, D.F.; Campbell, K.L.

    1994-06-01

    This report provides a statistical description of the types and severities of tractor semi-trailer accidents involving at least one fatality. The data were developed for use in risk assessments of hazardous materials transportation. Several accident databases were reviewed to determine their suitability to the task. The TIFA (Trucks Involved in Fatal Accidents) database created at the University of Michigan Transportation Research Institute was extensively utilized. Supplementary data on collision and fire severity, which was not available in the TIFA database, were obtained by reviewing police reports for selected TIFA accidents. The results are described in terms of frequencies of different accident types and cumulative distribution functions for the peak contact velocity, rollover skid distance, fire temperature, fire size, fire separation, and fire duration.

  3. Description of microstructural intragranular heterogeneities in a Ti-IF steel using a micromechanical approach

    SciTech Connect (OSTI)

    Wauthier, A.; Brenner, R.; Bacroix, B.; Regle, H.

    2007-04-07

    A classical problem in metallurgical research is to control the recrystallisation texture which forms during the last annealing process and which determine the mechanical behaviour of the final products. It is now widely admitted that the local deformed state and the substructural heterogeneities within the polycrystal are key parameters to understand the recrystallisation mechanisms.In this work, we present a micromechanical approach based on the use of the affine extension of the self-consistent scheme for viscoplastic behaviours and a phenomenological description of dislocation patterning using a hardening model recently developed for two-stage strain paths. These two ingredients allow to compare the model with experimental crystallographic texture after rolling as well as experimental observations of the intragranular substructure using orientation imaging by Electron Back-Scattered Diffaction. It is shown that the rolling texture is correctly simulated and successful predictions of the orientation of dislocation sheets are obtained.

  4. Description of work for 100-N Hanford Generating Plant settling pond drilling and sampling

    SciTech Connect (OSTI)

    Galbraith, R.P.

    1993-09-01

    This description of work details the field activities associated with borehole drilling and sampling of the 100-N Hanford Generating Plant (HGP) Settling Pond and will serve as a field guide for those performing the work. It should be used in conjunction with the Environmental Investigations and Site Characterization Manual (WHC 1988a) for specific procedures. The borehole location is shown in Figure 1. The settling pond, the dimensions of which are 40 m by 16 m (131.3 ft by 52.5 ft), is located at the HGP adjacent to the 100-N Area. The pond received process water from the plant. The water contained trace oxygen scavenging conditioners such as morpholine, hydrazine, and ammonia. Surface radioactivity readings are 150 to 500 cpm. Trace levels of surface contamination are present. Drilling and sampling will be in accordance with procedures in the EII manual (WHC 1988a).

  5. 105-K Basin material design basis feed description for spent nuclear fuel project facilities

    SciTech Connect (OSTI)

    Praga, A.N.

    1998-01-08

    Revisions 0 and 0A of this document provided estimated chemical and radionuclide inventories of spent nuclear fuel and sludge currently stored within the Hanford Site`s 105-K Basins. This Revision (Rev. 1) incorporates the following changes into Revision 0A: (1) updates the tables to reflect: improved cross section data, a decision to use accountability data as the basis for total Pu, a corrected methodology for selection of the heat generation basis fee, and a revised decay date; (2) adds section 3.3.3.1 to expand the description of the approach used to calculate the inventory values and explain why that approach yields conservative results; (3) changes the pre-irradiation braze beryllium value.

  6. Thermodynamic and structural description of europium complexation in 1-octanol solution

    SciTech Connect (OSTI)

    Charbonnel, M.C.; Vu, T.H.; Boubals, N.; Couston, L.

    2008-07-01

    Polydentate N-bearing ligands such as bis-triazinyl-pyridines (BTPS) are interesting extractants for actinide(III)/lanthanide(III) separation. A description of europium complexation in 1-octanol solutions was undertaken to enhance the knowledge of the extraction mechanisms. Time- Resolved Laser-Induced Fluorescence (TRLIF) spectroscopy allows determination of the first solvation shell for europium(III) nitrate, chloride, and perchlorate with different amounts of water. Europium nitrate complexation by iPr-BTP was then studied by TRLIF and microcalorimetry; the stability constant related to the formation of Eu(BTP){sub 3}{sup 3+} is similar by both techniques (log {beta}{sub 3} = 11.3 {+-} 0.5). The difference of solvation of the cation seems to have an influence on the thermodynamic properties related to the complexation with organic ligands. (authors)

  7. Structure Discovery in Large Semantic Graphs Using Extant Ontological Scaling and Descriptive Statistics

    SciTech Connect (OSTI)

    al-Saffar, Sinan; Joslyn, Cliff A.; Chappell, Alan R.

    2011-07-18

    As semantic datasets grow to be very large and divergent, there is a need to identify and exploit their inherent semantic structure for discovery and optimization. Towards that end, we present here a novel methodology to identify the semantic structures inherent in an arbitrary semantic graph dataset. We first present the concept of an extant ontology as a statistical description of the semantic relations present amongst the typed entities modeled in the graph. This serves as a model of the underlying semantic structure to aid in discovery and visualization. We then describe a method of ontological scaling in which the ontology is employed as a hierarchical scaling filter to infer different resolution levels at which the graph structures are to be viewed or analyzed. We illustrate these methods on three large and publicly available semantic datasets containing more than one billion edges each. Keywords-Semantic Web; Visualization; Ontology; Multi-resolution Data Mining;

  8. Innovative techniques for the description of reservoir heterogeneity using tracers. Final report, October 1992--December 1993

    SciTech Connect (OSTI)

    Pope, G.A.; Sepehrnoori, K.; Delshad, M.; Ferreira, L.; Gupta, A.; Maroongroge, V.

    1994-11-01

    This is the final report of a three year research project on the use of tracers for reservoir characterization. The objective of this research was to develop advanced, innovative techniques for the description of reservoir characteristics using both single-well backflow and interwell tracer tests. (1) The authors implemented and validated tracer modeling features in a compositional simulator (UTCOMP). (2) They developed and applied a new single well tracer test for estimating reservoir heterogeneity. (3) They developed and applied a new single well tracer test for estimating reservoir wettability in-situ. (4) They developed a new, simple and efficient method to analyze two well tracer tests based upon type curve matching and illustrated its use with actual field tracer data. (5) They developed a new method for deriving an integrated reservoir description based upon combinatorial optimization schemes. (6) They developed a new, interwell tracer test for reservoir heterogeneity called vertical tracer profiling (VTP) and demonstrated its advantages over conventional interwell tracer testing. (7) They developed a simple and easy analytical method to estimate swept pore volume from interwell tracer data and showed both the theoretical basis for this method and its practical utility. (8) They made numerous enhancements to our compositional reservoir simulator such as including the full permeability tensor, adding faster solvers, improving its speed and robustness and making it easier to use (better I/0) for tracer simulation problems. (9) They applied the enhanced version of UTCOMP to the analysis of interwell tracer data using perfluorocarbons at Elks Hill Naval Petroleum Reserve. All of these accomplishments taken together have significantly improved the state of reservoir tracer technology and have demonstrated that it is a far more powerful and useful tool for quantitative reservoir characterization than previously realized or practiced by the industry.

  9. Description of Model Data for SNL100-00: The Sandia 100-meter All-glass Baseline Wind Turbine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    00-00: The Sandia 100-meter All-glass Baseline Wind Turbine Blade D. Todd Griffith, Brian R. Resor Sandia National Laboratories Wind and Water Power Technologies Department Introduction This document provides a brief description of model files that are available for the SNL100-00 blade [1]. For each file, codes used to create/read the model files are detailed (e.g. code version and date, description, etc). A summary of the blade model data is also provided from the design report [1]. A Design

  10. Description and performance of track and primary-vertex reconstruction with the CMS tracker

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chatrchyan, Serguei

    2014-10-16

    A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For tbar t events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of pT > 0.9GeV is 94% for pseudorapidities of |η| < 0.9 and 85% for 0.9 < |η| < 2.5. Themore » inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of pT = 100GeV emitted at |η| < 1.4, the resolutions are approximately 2.8% in pT, and respectively, 10μm and 30μm in the transverse and longitudinal impact parameters. The position resolution achieved for reconstructed primary vertices that correspond to interesting pp collisions is 10–12μm in each of the three spatial dimensions. The tracking and vertexing software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung.« less

  11. Process Options Description for Vitrification Flowsheet Model of INEEL Sodium Bearing Waste

    SciTech Connect (OSTI)

    Nichols, T.T.; Taylor, D.D.; Lauerhass, L.; Barnes, C.M.

    2002-02-21

    The technical information required for the development of a basic steady-state process simulation of the vitrification treatment train of sodium bearing waste (SBW) at Idaho National Engineering and Environmental Laboratory (INEEL) is presented. The objective of the modeling effort is to provide the predictive capability required to optimize an entire treatment train and assess system-wide impacts of local changes at individual unit operations, with the aim of reducing the schedule and cost of future process/facility design efforts. All the information required a priori for engineers to construct and link unit operation modules in a commercial software simulator to represent the alternative treatment trains is presented. The information is of a mid- to high-level nature and consists of the following: (1) a description of twenty-four specific unit operations--their operating conditions and constraints, primary species and key outputs, and the initial modeling approaches that will be used in the first year of the simulation's development; (2) three potential configurations of the unit operations (trains) and their interdependencies via stream connections; and (3) representative stream compositional makeups.

  12. Process Options Description for Steam Reforming Flowsheet Model of INEEL Tank Farm Waste

    SciTech Connect (OSTI)

    Taylor, D.D.; Barnes, C.M.; Nichols, T.T.

    2002-05-21

    Technical information is provided herein that is required for development of a steady-state process simulation of a baseline steam reforming treatment train for Tank Farm waste at the Idaho National Engineering and Environmental Laboratory (INEEL). This document supercedes INEEL/EXT-2001-173, produced in FY2001 to support simulation of the direct vitrification treatment train which was the previous process baseline. A process block flow diagram for steam reforming is provided, together with a list of unit operations which constitute the process. A detailed description of each unit operation is given which includes its purpose, principal phenomena present, expected pressure and temperature ranges, key chemical species in the inlet steam, and the proposed manner in which the unit operation is to be modeled in the steady state process simulation. Models for the unit operations may be mechanistic (based on first principles), empirical (based solely on pilot test data without extrapolation) , or by correlations (based on extrapolative or statistical schemes applied to pilot test data). Composition data for the expected process feed streams is provided.

  13. Hybrid density functional theory description of N- and C-doping of NiO

    SciTech Connect (OSTI)

    Nolan, Michael; Long, Run; English, Niall J.; Mooney, Damian A.

    2011-06-14

    The large intrinsic bandgap of NiO hinders its potential application as a photocatalyst under visible-light irradiation. In this study, we have performed first-principles screened exchange hybrid density functional theory with the HSE06 functional calculations of N- and C-doped NiO to investigate the effect of doping on the electronic structure of NiO. C-doping at an oxygen site induces gap states due to the dopant, the positions of which suggest that the top of the valence band is made up primarily of C 2p-derived states with some Ni 3d contributions, and the lowest-energy empty state is in the middle of the gap. This leads to an effective bandgap of 1.7 eV, which is of potential interest for photocatalytic applications. N-doping induces comparatively little dopant-Ni 3d interactions, but results in similar positions of dopant-induced states, i.e., the top of the valence band is made up of dopant 2p states and the lowest unoccupied state is the empty gap state derived from the dopant, leading to bandgap narrowing. With the hybrid density functional theory (DFT) results available, we discuss issues with the DFT corrected for on-site Coulomb description of these systems.

  14. Property description and fact-finding report for NOSR 1&3, Garfield County, Colorado

    SciTech Connect (OSTI)

    1996-06-30

    The US Department of Energy has asked Gustavson Associates, Inc. to serve as an Independent Petroleum Consultant under contract DE-AC01-96FE64202. This authorizes a study and recommendations regarding future development of Naval Oil Shale No. 1 and No. 3 (NOSR 1 and 3) in Garfield County, Colorado. The report that follows is the Phase I fact-finding and property description for that study. The United States of America claims ownership of 100 percent of the minerals and 100 percent of the surface rights in 36,406-acre NOSR-1 and 20,171-acre at NOSR-3. Production has been established on NOSR-3 and currently the DOE owns interests in 53 gas wells that produce on or immediately adjacent to the acreage. NOSR-3 also contains undrilled locations that are classified as proved undeveloped or probable reserves. Recently, the Colorado Oil and Gas Commission (COGCC) approved an increased 40 acre drilling density for the Mesaverde formation that includes portions of NOSR-3.

  15. Nevada National Security Site Environmental Report 2012 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, Cathy A

    2013-09-11

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  16. Nevada National Security Site Environmental Report 2013 Attachment A: Site Description

    SciTech Connect (OSTI)

    Wills, C.

    2014-09-09

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  17. Description of work for 200-UP-1 characterization of monitoring wells

    SciTech Connect (OSTI)

    Innis, B.E.; Kelty, G.G.

    1994-02-01

    This description of work (DOW) details the field activities associated with the drilling, soil sampling, and construction of groundwater monitoring and dual-use wells in the 200-UP-1 Operable Unit (Tasks 2, 3, and 5 in the 200-UP-1 RI/FS Work Plan DOE/RL 1993a) and will serve as a field guide for those performing the work. It will be used in conjunction with the Remedial Investigation/Feasibility Study Work Plan for the 200-UP-1 Groundwater operable Unit (DOE-RL 1993a, [LFI]) and Site Characterization Manual (WHC 1988a). Groundwater wells are being constructed to characterize the vertical and horizontal extent of the Uranium and {sup 99}{Tc} plumes and to define aquifer properties such as hydraulic communication between aquifers and hydrostratigraphy. Some of these wells may be utilized for extraction purposes during the IRM phase anticipated at this operable unit and are being designed with a dual use in mind. These data will be used to optimize the Interim Remedial Measures (IRM) for the cleanup of these two plumes. The data will also be used with later Limited Field Investigation (LFI) data to perform a Qualitative Risk Assessment (QRA) for the operable unit. The locations for the proposed groundwater wells are presented in Figure 1. The contaminants of concern for the project are presented ih Table 1.

  18. Microscopic description of anisotropic low-density dipolar Bose gases in two dimensions

    SciTech Connect (OSTI)

    Macia, A.; Mazzanti, F.; Boronat, J.; Zillich, R. E.

    2011-09-15

    A microscopic description of the zero-energy two-body ground state and many-body static properties of anisotropic homogeneous gases of bosonic dipoles in two dimensions at low densities is presented and discussed. By changing the polarization angle with respect to the plane, we study the impact of the anisotropy, present in the dipole-dipole interaction, on the energy per particle, comparing the results with mean-field predictions. We restrict the analysis to the regime where the interaction is always repulsive, although the strength of the repulsion depends on the orientation with respect to the polarization field. We present a series expansion of the solution of the zero-energy two-body problem, which allows us to find the scattering length of the interaction and to build a suitable Jastrow factor that we use as a trial wave function for both a variational and diffusion Monte Carlo simulation of the infinite system. We find that the anisotropy has an almost negligible impact on the ground-state properties of the many-body system in the universal regime where the scattering length governs the physics of the system. We also show that scaling in the gas parameter persists in the dipolar case up to values where other isotropic interactions with the same scattering length yield different predictions.

  19. General description of electromagnetic radiation processes based on instantaneous charge acceleration in ''endpoints''

    SciTech Connect (OSTI)

    James, Clancy W.; Falcke, Heino; Huege, Tim; Ludwig, Marianne

    2011-11-15

    We present a methodology for calculating the electromagnetic radiation from accelerated charged particles. Our formulation - the 'endpoint formulation' - combines numerous results developed in the literature in relation to radiation arising from particle acceleration using a complete, and completely general, treatment. We do this by describing particle motion via a series of discrete, instantaneous acceleration events, or 'endpoints', with each such event being treated as a source of emission. This method implicitly allows for particle creation and destruction, and is suited to direct numerical implementation in either the time or frequency domains. In this paper we demonstrate the complete generality of our method for calculating the radiated field from charged particle acceleration, and show how it reduces to the classical named radiation processes such as synchrotron, Tamm's description of Vavilov-Cherenkov, and transition radiation under appropriate limits. Using this formulation, we are immediately able to answer outstanding questions regarding the phenomenology of radio emission from ultra-high-energy particle interactions in both the earth's atmosphere and the moon. In particular, our formulation makes it apparent that the dominant emission component of the Askaryan effect (coherent radio-wave radiation from high-energy particle cascades in dense media) comes from coherent 'bremsstrahlung' from particle acceleration, rather than coherent Vavilov-Cherenkov radiation.

  20. Description and performance of track and primary-vertex reconstruction with the CMS tracker

    SciTech Connect (OSTI)

    Chatrchyan, Serguei

    2014-10-16

    A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For tbar t events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of pT > 0.9GeV is 94% for pseudorapidities of |?| < 0.9 and 85% for 0.9 < |?| < 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of pT = 100GeV emitted at |?| < 1.4, the resolutions are approximately 2.8% in pT, and respectively, 10?m and 30?m in the transverse and longitudinal impact parameters. The position resolution achieved for reconstructed primary vertices that correspond to interesting pp collisions is 1012?m in each of the three spatial dimensions. The tracking and vertexing software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung.

  1. Towards a nonequilibrium Green's function description of nuclear reactions: One-dimensional mean-field dynamics

    SciTech Connect (OSTI)

    Rios, Arnau; Barker, Brent; Buchler, Mark; Danielewicz, Pawel

    2011-05-15

    Research Highlights: > Dynamics of central nuclear reactions. > Nonequilibrium Green's functions and Kadanoff-Baym formalism. > Adiabatic switching on of interactions. > Mean-field time evolution of nuclear slabs. > Off-diagonal spatial structure of a collision density matrix. - Abstract: Nonequilibrium Green's function methods allow for an intrinsically consistent description of the evolution of quantal many-body body systems, with inclusion of different types of correlations. In this paper, we focus on the practical developments needed to build a Green's function methodology for nuclear reactions. We start out by considering symmetric collisions of slabs in one dimension within the mean-field approximation. We concentrate on two issues of importance for actual reaction simulations. First, the preparation of the initial state within the same methodology as for the reaction dynamics is demonstrated by an adiabatic switching on of the mean-field interaction, which leads to the mean-field ground state. Second, the importance of the Green's function matrix-elements far away from the spatial diagonal is analyzed by a suitable suppression process that does not significantly affect the evolution of the elements close to the diagonal. The relative lack of importance of the far-away elements is tied to system expansion. We also examine the evolution of the Wigner function and verify quantitatively that erasing of the off-diagonal elements corresponds to averaging out of the momentum-space details in the Wigner function.

  2. Nevada National Security Site Environmental Report 2011 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2012-09-12

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  3. Experimental determination of lead carbonate solubility at high ionic strengths: A Pitzer model description

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Xiong, Yongliang

    2015-05-06

    In this article, solubility measurements of lead carbonate, PbCO3(cr), cerussite, as a function of total ionic strengths are conducted in the mixtures of NaCl and NaHCO3 up to I = 1.2 mol•kg–1 and in the mixtures of NaHCO3 and Na2CO3 up to I = 5.2 mol•kg–1, at room temperature (22.5 ± 0.5 °C). The solubility constant (log Ksp) for cerussite, PbCO3(cr) = Pb2+ + CO32- was determined as –13.76 ± 0.15 (2σ) with a set of Pitzer parameters describing the specific interactions of PbCO3(aq), Pb(CO3)22-, and Pb(CO3)Cl– with the bulk-supporting electrolytes, based on the Pitzer model. The model developed inmore » this work can reproduce the experimental results including model-independent solubility values from the literature over a wide range of ionic strengths with satisfactory accuracy. The model is expected to find applications in numerous fields, including the accurate description of chemical behavior of lead in geological repositories, the modeling of formation of oxidized Pb–Zn ore deposits, and the environmental remediation of lead contamination.« less

  4. Description of Regional Superfund pilots. Excerpts from `Status of Regional Superfund pilots: End-of-year report`

    SciTech Connect (OSTI)

    1994-12-31

    Following are brief descriptions of the Regional Superfund pilots excerpted from OSWER Publication 9202.1-15A entitled, ``Status of Regional Superfund Pilots: End of Year Report`` (NTIS {number_sign}PB94-963216). The above-referenced report provides greater detail on each pilot`s goals, status and results to date.

  5. Table 8.12a Electric Noncoincident Peak Load and Capacity Margin: Summer Peak Period, 1986-2011 (Megawatts, Except as Noted)

    U.S. Energy Information Administration (EIA) Indexed Site

    a Electric Noncoincident Peak Load and Capacity Margin: Summer Peak Period, 1986-2011 (Megawatts, Except as Noted) Year Noncoincident Peak Load 1 by North American Electric Reliability Corporation (NERC) 2 Regional Assessment Area Capacity Margin 21 (percent) Eastern Interconnection ERCOT 4 Western Inter- connection All Inter- connections FRCC 5 NPCC 6 Balance of Eastern Region 3 ECAR 7,8 MAAC 8,9 MAIN 8,10 MAPP 11 MISO 12 MRO 13 PJM 14 RFC 8,15 SERC 16 SPP 17 Subtotal TRE 18 WECC 19 Total 20

  6. Table 8.12b Electric Noncoincident Peak Load and Capacity Margin: Winter Peak Period, 1986-2011 (Megawatts, Except as Noted)

    U.S. Energy Information Administration (EIA) Indexed Site

    b Electric Noncoincident Peak Load and Capacity Margin: Winter Peak Period, 1986-2011 (Megawatts, Except as Noted) Year Noncoincident Peak Load 1 by North American Electric Reliability Corporation (NERC) 2 Regional Assessment Area Capacity Margin 21 (percent) Eastern Interconnection ERCOT 4 Western Inter- connection All Inter- connections FRCC 5 NPCC 6 Balance of Eastern Region 3 ECAR 7,8 MAAC 8,9 MAIN 8,10 MAPP 11 MISO 12 MRO 13 PJM 14 RFC 8,15 SERC 16 SPP 17 Subtotal TRE 18 WECC 19 Total 20

  7. Summary Notes from 1 November 2007 Generic Technical Issue Discussion on Removal of Highly Radioactive Radionuclides/Key Radionuclides to the Maximum Extent Practical

    Office of Environmental Management (EM)

    Max Total Units *If All Splits, No Rack Units **If Only FW, AC Splits 1000 52 28 28 2000 87 59 35 3000 61 33 15 4000 61 33 15 Totals 261 153 93 ***Costs $1,957,500.00 $1,147,500.00 $697,500.00 Notes: added several refrigerants removed bins from analysis removed R-22 from list 1000lb, no Glycol, CO2 or ammonia Seawater R-404A only * includes seawater units ** no seawater units included *** Costs = (total units) X (estimate of $7500 per unit) 1000lb, air cooled split systems, fresh water Refrig

  8. Groundwater heat pumps: an examination of hydrogeologic, environmental, legal, and economic factors affecting their use. Volume II. Appendix D, state hydrogeologic descriptions and maps

    SciTech Connect (OSTI)

    Armitage, Dana M.; Bacon, Douglas J.; Massey-Norton, John T.; Miller, James M.

    1980-11-01

    This appendix to the groundwater heat pump report contains hydrogeologic descriptions of the 48 conterminous US with data on ground water quality.

  9. CONCEPTUAL PROCESS DESCRIPTION FOR THE MANUFACTURE OF LOW-ENRICHED URANIUM-MOLYBDENUM FUEL

    SciTech Connect (OSTI)

    Daniel M. Wachs; Curtis R. Clark; Randall J. Dunavant

    2008-02-01

    The National Nuclear Security Agency Global Threat Reduction Initiative (GTRI) is tasked with minimizing the use of high-enriched uranium (HEU) worldwide. A key component of that effort is the conversion of research reactors from HEU to low-enriched uranium (LEU) fuels. The GTRI Convert Fuel Development program, previously known as the Reduced Enrichment for Research and Test Reactors program was initiated in 1978 by the United States Department of Energy to develop the nuclear fuels necessary to enable these conversions. The program cooperates with the research reactors’ operators to achieve this goal of HEU to LEU conversion without reduction in reactor performance. The programmatic mandate is to complete the conversion of all civilian domestic research reactors by 2014. These reactors include the five domestic high-performance research reactors (HPRR), namely: the High Flux Isotope Reactor at the Oak Ridge National Laboratory, the Advanced Test Reactor at the Idaho National Laboratory, the National Bureau of Standards Reactor at the National Institute of Standards and Technology, the Missouri University Research Reactor at the University of Missouri–Columbia, and the MIT Reactor-II at the Massachusetts Institute of Technology. Characteristics for each of the HPRRs are given in Appendix A. The GTRI Convert Fuel Development program is currently engaged in the development of a novel nuclear fuel that will enable these conversions. The fuel design is based on a monolithic fuel meat (made from a uranium-molybdenum alloy) clad in Al-6061 that has shown excellent performance in irradiation testing. The unique aspects of the fuel design, however, necessitate the development and implementation of new fabrication techniques and, thus, establishment of the infrastructure to ensure adequate fuel fabrication capability. A conceptual fabrication process description and rough estimates of the total facility throughput are described in this document as a basis for establishing preconceptual fabrication facility designs.

  10. Experimental determination of lead carbonate solubility at high ionic strengths: A Pitzer model description

    SciTech Connect (OSTI)

    Xiong, Yongliang

    2015-05-06

    In this article, solubility measurements of lead carbonate, PbCO3(cr), cerussite, as a function of total ionic strengths are conducted in the mixtures of NaCl and NaHCO3 up to I = 1.2 mol•kg–1 and in the mixtures of NaHCO3 and Na2CO3 up to I = 5.2 mol•kg–1, at room temperature (22.5 ± 0.5 °C). The solubility constant (log Ksp) for cerussite, PbCO3(cr) = Pb2+ + CO32- was determined as –13.76 ± 0.15 (2σ) with a set of Pitzer parameters describing the specific interactions of PbCO3(aq), Pb(CO3)22-, and Pb(CO3)Cl with the bulk-supporting electrolytes, based on the Pitzer model. The model developed in this work can reproduce the experimental results including model-independent solubility values from the literature over a wide range of ionic strengths with satisfactory accuracy. The model is expected to find applications in numerous fields, including the accurate description of chemical behavior of lead in geological repositories, the modeling of formation of oxidized Pb–Zn ore deposits, and the environmental remediation of lead contamination.

  11. Contam airflow models of three large buildings: Model descriptions and validation

    SciTech Connect (OSTI)

    Black, Douglas R.; Price, Phillip N.

    2009-09-30

    Airflow and pollutant transport models are useful for several reasons, including protection from or response to biological terrorism. In recent years they have been used for deciding how many biological agent samplers are needed in a given building to detect the release of an agent; to figure out where those samplers should be located; to predict the number of people at risk in the event of a release of a given size and location; to devise response strategies in the event of a release; to determine optimal trade-offs between sampler characteristics (such as detection limit and response time); and so on. For some of these purposes it is necessary to model a specific building of interest: if you are trying to determine optimal sampling locations, you must have a model of your building and not some different building. But for many purposes generic or 'prototypical' building models would suffice. For example, for determining trade-offs between sampler characteristics, results from one building will carry over other, similar buildings. Prototypical building models are also useful for comparing or testing different algorithms or computational pproaches: different researchers can use the same models, thus allowing direct comparison of results in a way that is not otherwise possible. This document discusses prototypical building models developed by the Airflow and Pollutant Transport Group at Lawrence Berkeley National Laboratory. The models are implemented in the Contam v2.4c modeling program, available from the National Institutes for Standards and Technology. We present Contam airflow models of three virtual buildings: a convention center, an airport terminal, and a multi-story office building. All of the models are based to some extent on specific real buildings. Our goal is to produce models that are realistic, in terms of approximate magnitudes, directions, and speeds of airflow and pollutant transport. The three models vary substantially in detail. The airport model is the simplest; the onvention center model is more detailed; and the large office building model is quite complicated. We give several simplified floor plans in this document, to explain basic features of the buildings. The actual models are somewhat more complicated; for instance, spaces that are represented as rectangles in this document sometimes have more complicated shapes in the models. (However, note that the shape of a zone is irrelevant in Contam). Consult the Contam models themselves for detailed floor plans. Each building model is provided with three ventilation conditions, representing mechanical systems in which 20%, 50%, or 80% of the building air is recirculated and the rest is provided from outdoors. Please see the section on 'Use of the models' for important information about issues to consider if you wish to modify the models to provide no mechanical ventilation or eliminate provision of outdoor air.

  12. A BRIEF DESCRIPTION OF THE SMALL-SCALE SAFETY TESTING SYSTEMS AT LAWRENCE LIVERMORE NATIONAL LABORATORY

    SciTech Connect (OSTI)

    HSU, P C

    2008-07-31

    Small-scale sensitivity testing is important for determining material response to various stimuli including impact, friction, and static spark. These tests, briefly described below, provide parameters for safety in handling. ERL Type 12 drop hammer equipment at LLNL, shown in Figure 1, was used to determine the impact sensitivity. The equipment includes a 2.5-kg drop weight, a striker (upper anvil, 2.5 kg for solid samples and 1.0 kg for liquid samples), a bottom anvil, a microphone sensor, and a peakmeter. For each drop, sample (35 mg for solid or 45 microliter for liquid) is placed on the bottom anvil surface and impacted by the drop weight from different heights. Signs of reactions upon impact are observed and recorded. These signs include noises, flashes or sparks, smoke, pressure, gas emissions, temperature rise due to exothermic reaction, color change of the sample, and changes to the anvil surface (noted by inspection). For solid samples, a 'GO' was defined as a microphone sensor (for noise detection) response of {ge} 1.3 V as measured by a peakmeter. The higher the DH{sub 50} values, the lower the impact sensitivity. The method used to calculate DH{sub 50} values is the 'up and down' or Bruceton method. PETN and RDX have impact sensitivities of 15 and 35 cm, respectively. TATB has impact sensitivity more than 177 cm. For liquid samples, a 'GO' was determined by the noise levels as measured by the peakmeter, appearance of flashes, temperature rise of the anvil, and visual inspection of the anvil surface. Two liquid samples TMETN and FEFO have impact sensitivities of 14 and 32 cm, respectively. Figure 2 shows a 'GO' event observed during the impact sensitivity test; flashes appeared as the drop weight impacted the sample. A BAM friction sensitivity test machine, as shown in Figure 3, was used to determine the frictional sensitivity. The system uses a fixed porcelain pin and a movable porcelain plate that executes a reciprocating motion. Weight affixed to a torsion arm allows for a variation in applied force between 0.5 kg to 36.0 kg. The relative measure of the frictional sensitivity of a material is based upon the smallest load (kg) at which reaction occurs for a 1-in-10 series of attempts. The lower the load values, the higher the frictional sensitivity. PETN has a frictional sensitivity of 6.4 kg. The static spark machine at LLNL is used to evaluate the electrostatic discharge hazards (human ESD) associated with the handling of explosives. The machine was custom-built almost 30 years ago and consists of a capacitor bank (up to 20,000 pF), a voltage meter, and a discharge circuit, as shown in Figure 4. An adjustable resistor up to 510 ohms (chosen to simulate human body) is wired to the discharge circuit. A 5-mg sample is placed in a Teflon washer sealed to a steel disc and covered with a Mylar tape. High static voltage (up to 10 kv) is applied and discharged to the sample. Evidence of reaction is judged from the condition of Mylar tape, smokes, and color change of the sample. Voltage, capacitance, and resistance can be adjusted to achieve the desired static energy. The results obtained are expressed as a zero in 10 or one-in-ten at a specific voltage and joules. One reaction in ten trials at {le} 0.25 joules is considered spark-sensitive. Primary explosives show reaction at 0.1 joule.

  13. THE HST/ACS COMA CLUSTER SURVEY. II. DATA DESCRIPTION AND SOURCE CATALOGS

    SciTech Connect (OSTI)

    Hammer, Derek; Verdoes Kleijn, Gijs; Den Brok, Mark; Peletier, Reynier F.; Hoyos, Carlos; Balcells, Marc; Aguerri, Alfonso L.; Ferguson, Henry C.; Goudfrooij, Paul; Carter, David; Guzman, Rafael; Smith, Russell J.; Lucey, John R.; Graham, Alister W.; Trentham, Neil; Peng, Eric; Puzia, Thomas H.; Jogee, Shardha; Batcheldor, Dan; Bridges, Terry J.

    2010-11-15

    The Coma cluster, Abell 1656, was the target of an HST-ACS Treasury program designed for deep imaging in the F475W and F814W passbands. Although our survey was interrupted by the ACS instrument failure in early 2007, the partially completed survey still covers {approx}50% of the core high-density region in Coma. Observations were performed for 25 fields that extend over a wide range of cluster-centric radii ({approx}1.75 Mpc or 1{sup 0}) with a total coverage area of 274 arcmin{sup 2}. The majority of the fields are located near the core region of Coma (19/25 pointings) with six additional fields in the southwest region of the cluster. In this paper, we present reprocessed images and SEXTRACTOR source catalogs for our survey fields, including a detailed description of the methodology used for object detection and photometry, the subtraction of bright galaxies to measure faint underlying objects, and the use of simulations to assess the photometric accuracy and completeness of our catalogs. We also use simulations to perform aperture corrections for the SEXTRACTOR Kron magnitudes based only on the measured source flux and its half-light radius. We have performed photometry for {approx}73,000 unique objects; approximately one-half of our detections are brighter than the 10{sigma} point-source detection limit at F814W = 25.8 mag (AB). The slight majority of objects (60%) are unresolved or only marginally resolved by ACS. We estimate that Coma members are 5%-10% of all source detections, which consist of a large population of unresolved compact sources (primarily globular clusters but also ultra-compact dwarf galaxies) and a wide variety of extended galaxies from a cD galaxy to dwarf low surface brightness galaxies. The red sequence of Coma member galaxies has a color-magnitude relation with a constant slope and dispersion over 9 mag (-21 < M {sub F814W} < -13). The initial data release for the HST-ACS Coma Treasury program was made available to the public in 2008 August. The images and catalogs described in this study relate to our second data release.

  14. Comparative assessment of TRU waste forms and processes. Volume II. Waste form data, process descriptions, and costs.

    SciTech Connect (OSTI)

    Ross, W.A.; Lokken, R.O.; May, R.P.; Roberts, F.P.; Thornhill, R.E.; Timmerman, C.L.; Treat, R.L.; Westsik, J.H. Jr.

    1982-09-01

    This volume contains supporting information for the comparative assessment of the transuranic waste forms and processes summarized in Volume I. Detailed data on the characterization of the waste forms selected for the assessment, process descriptions, and cost information are provided. The purpose of this volume is to provide additional information that may be useful when using the data in Volume I and to provide greater detail on particular waste forms and processes. Volume II is divided into two sections and two appendixes. The first section provides information on the preparation of the waste form specimens used in this study and additional characterization data in support of that in Volume I. The second section includes detailed process descriptions for the eight processes evaluated. Appendix A lists the results of MCC-1 leach test and Appendix B lists additional cost data. 56 figures, 12 tables.

  15. Tokamak Physics EXperiment (TPX): Toroidal field magnet design, development and manufacture. SDRL 15, System design description. Volume 1

    SciTech Connect (OSTI)

    1995-09-22

    This System Design Description, prepared in accordance with the TPX Project Management Plan provides a summary or TF Magnet System design features at the conclusion of Phase I, Preliminary Design and Manufacturing Research. The document includes the analytical and experimental bases for the design, and plans for implementation in final design, manufacturing, test, and magnet integration into the tokamak. Requirements for operation and maintenance are outlined, and references to sources of additional information are provided.

  16. Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities. Sections 1-14

    SciTech Connect (OSTI)

    Schneider, K.J.

    1982-09-01

    The Fuel Cycle Risk Assessment Program was initiated to provide risk assessment methods for assistance in the regulatory process for nuclear fuel cycle facilities other than reactors. This report, the first from the program, defines and describes fuel cycle elements that are being considered in the program. One type of facility (and in some cases two) is described that is representative of each element of the fuel cycle. The descriptions are based on real industrial-scale facilities that are current state-of-the-art, or on conceptual facilities where none now exist. Each representative fuel cycle facility is assumed to be located on the appropriate one of four hypothetical but representative sites described. The fuel cycles considered are for Light Water Reactors with once-through flow of spent fuel, and with plutonium and uranium recycle. Representative facilities for the following fuel cycle elements are described for uranium (or uranium plus plutonium where appropriate): mining, milling, conversion, enrichment, fuel fabrication, mixed-oxide fuel refabrication, fuel reprocessing, spent fuel storage, high-level waste storage, transuranic waste storage, spent fuel and high-level and transuranic waste disposal, low-level and intermediate-level waste disposal, and transportation. For each representative facility the description includes: mainline process, effluent processing and waste management, facility and hardware description, safety-related information and potential alternative concepts for that fuel cycle element. The emphasis of the descriptive material is on safety-related information. This includes: operating and maintenance requirements, input/output of major materials, identification and inventories of hazardous materials (particularly radioactive materials), unit operations involved, potential accident driving forces, containment and shielding, and degree of hands-on operation.

  17. Dynamical description of the moments of the energy distribution of fission fragments and scission of a fissile nucleus

    SciTech Connect (OSTI)

    Borunov, M. V., E-mail: bmv@opsb.ru; Nadtochy, P. N.; Adeev, G. D. [Omsk State University (Russian Federation)

    2007-11-15

    A multidimensional stochastic approach to fission dynamics on the basis of three-dimensional Langevin equations is applied systematically to calculating the first four moments of the energy distribution of fission fragments over a broad range of Coulomb parameter values (700 < Z{sup 2}/A{sup 1/3} < 1700). For the scission of a fissile nucleus into fragments, use was made of various criteria traditional in modern fission theory: the vanishing of the neck radius at the scission instant and the equality of the neck radius to about 0.3R{sub 0} at this instant. In calculating the energy distribution, both of the criteria used lead to a fairly good description of experimental data on the first two moments and to a satisfactory description of data on the third and fourth moments of the distribution. However, the quality of the description of available experimental data is insufficiently good for giving preference to any of these criteria. Within three-dimensional Langevin dynamics, it is shown that the vanishing-radius criterion leads to unexpectably good agreement with experimental data on the first four moments of the energy distribution. A modified version of one-body dissipation where the coefficient that takes into account the reduction of the wall-formula contribution was set to k{sub s} = 0.25 was used in the calculations.

  18. Explanatory Notes Explanatory Notes The EIA-782 Surveys Background

    U.S. Energy Information Administration (EIA) Indexed Site

    data at a State level on 14 petroleum products for various retail and wholesale marketing categories. The Form EIA-782B collects resellerretailer monthly price and volume...

  19. Description of the dipole giant resonance in heavy and superheavy nuclei within Skyrme random-phase approximation

    SciTech Connect (OSTI)

    Kleinig, W.; Nesterenko, V. O.; Kvasil, J.; Vesely, P.; Reinhard, P.-G.

    2008-10-15

    The E1(T=1) isovector dipole giant resonance (GDR) in heavy and superheavy deformed nuclei is analyzed over a sample of 18 rare-earth nuclei, four actinides, and three chains of superheavy elements (Z=102, 114, and 120). The basis of the description is the self-consistent separable random-phase approximation (SRPA) using the Skyrme force SLy6. The model well reproduces the experimental data in the rare-earth and actinide regions. The trend of the resonance peak energies follows the estimates from collective models, showing a bias to the volume mode for the rare-earth isotopes and a mix of volume and surface modes for actinides and superheavy elements. The widths of the GDR are mainly determined by the Landau fragmentation, which in turn is found to be strongly influenced by deformation. A deformation splitting of the GDR can contribute to about one-third of the width, and about 1 MeV further broadening can be associated with mechanisms beyond the SRPA description (e.g., escape widths and coupling with complex configurations)

  20. Configuration interaction singles natural orbitals: An orbital basis for an efficient and size intensive multireference description of electronic excited states

    SciTech Connect (OSTI)

    Shu, Yinan; Levine, Benjamin G.; Hohenstein, Edward G.

    2015-01-14

    Multireference quantum chemical methods, such as the complete active space self-consistent field (CASSCF) method, have long been the state of the art for computing regions of potential energy surfaces (PESs) where complex, multiconfigurational wavefunctions are required, such as near conical intersections. Herein, we present a computationally efficient alternative to the widely used CASSCF method based on a complete active space configuration interaction (CASCI) expansion built from the state-averaged natural orbitals of configuration interaction singles calculations (CISNOs). This CISNO-CASCI approach is shown to predict vertical excitation energies of molecules with closed-shell ground states similar to those predicted by state averaged (SA)-CASSCF in many cases and to provide an excellent reference for a perturbative treatment of dynamic electron correlation. Absolute energies computed at the CISNO-CASCI level are found to be variationally superior, on average, to other CASCI methods. Unlike SA-CASSCF, CISNO-CASCI provides vertical excitation energies which are both size intensive and size consistent, thus suggesting that CISNO-CASCI would be preferable to SA-CASSCF for the study of systems with multiple excitable centers. The fact that SA-CASSCF and some other CASCI methods do not provide a size intensive/consistent description of excited states is attributed to changes in the orbitals that occur upon introduction of non-interacting subsystems. Finally, CISNO-CASCI is found to provide a suitable description of the PES surrounding a biradicaloid conical intersection in ethylene.

  1. PIC Transcribed Flip Chart Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 31, 2012 Options - Response to SOS Advice 1. Have some smaller topical workshops that don't require agency decision-makers. Still reaching the "new" general audiences 2. Need guidelines/checklist a. How meetings set up, how process worked, etc.  measuring consistently (advice point 3) Page 1 Options - Response to SOS Advice (continued) 3. (Advice point 3 response) trying to say that for meetings being planned, consider these factors in the planning process, responding to

  2. Company Level Imports Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    that some imports are not correctly reported on Form EIA-814 "Monthly Imports Report". Contact with the companies provides sufficient information for EIA to include these imports...

  3. PIC Transcribed Flip Chart Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    funding Page 2 SOS Meetings (continued) 3. Location: a. Portland (Hanford Watch, ODOE, PSR, CRK) b. Seattle (Hanford Challenge) c. Hood River (CRK) d. Tri-Cities (LOWV) Page 3...

  4. Sierra Structural Dynamics User's Notes

    SciTech Connect (OSTI)

    Reese, Garth M.

    2015-10-19

    Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of weapons systems. This document provides a users guide to the input for Sierra/SD. Details of input specifications for the different solution types, output options, element types and parameters are included. The appendices contain detailed examples, and instructions for running the software on parallel platforms.

  5. OTS NOTE DATE: TO: FROM:

    Office of Legacy Management (LM)

    TO: FROM: March 25, 1991 A. Williams D. stout P SUBJECT: Elimination Recommendation for the Star Cutter Corporation The .attached memorandum and supporting documents are the basis ...

  6. Booster double harmonic setup notes

    SciTech Connect (OSTI)

    Gardner, C. J.

    2015-02-17

    The motivation behind implementing a booster double harmonic include the reduced transverse space charge force from a reduced peak beam current and reduced momentum spread of the beam, both of which can be achieved from flattening the RF bucket. RF capture and acceleration of polarized protons (PP) is first set up in the single harmonic mode with RF harmonic h=1. Once capture and acceleration have been set up in the single harmonic mode, the second harmonic system is brought on and programmed to operate in concert with the single harmonic system.

  7. SA TEC Meeting Notes -- Final

    Office of Environmental Management (EM)

    February 6-7, 2008 San Antonio, Texas U.S DEPARTMENT OF ENERGY TRANSPORTATION EXTERNAL COORDINATION WORKING GROUP MEETING February 6-7, 2008 San Antonio, Texas Welcome and Meeting Overview The U.S. Department of Energy (DOE), Transportation External Coordination (TEC) Working Group held its 29th meeting on February 6-7, 2008, in San Antonio, Texas. One hundred thirty- one participants from government, industry, professional organizations, and other interested parties met to address a variety of

  8. Attachment1-Notes110211.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  9. U-AVLIS feed conversion using continuous metallothermic reduction of UF{sub 4}: System description and cost estimate

    SciTech Connect (OSTI)

    Not Available

    1994-04-01

    The purpose of this document is to present a system description and develop baseline capital and operating cost estimates for commercial facilities which produced U-Fe feedstock for AVLIS enrichment plants using the continuous fluoride reduction (CFR) process. These costs can then be used together with appropriate economic assumptions to calculate estimated unit costs to the AVLIS plant owner (or utility customer) for such conversion services. Six cases are being examined. All cases assume that the conversion services are performed by a private company at a commercial site which has an existing NRC license to possess source material and which has existing uranium processing operations. The cases differ in terms of annual production capacity and whether the new process system is installed in a new building or in an existing building on the site. The six cases are summarized here.

  10. Nuclear-fuel-cycle risk assessment: descriptions of representative non-reactor facilities, Sections 15-19

    SciTech Connect (OSTI)

    Schneider, K.J.

    1982-09-01

    Information is presented under the following section headings: fuel reprocessing; spent fuel and high-level and transuranic waste storage; spent fuel and high-level and transuranic waste disposal; low-level and intermediate-level waste disposal; and, transportation of radioactive materials in the nuclear fuel cycle. In each of the first three sections a description is given on the mainline process, effluent processing and waste management systems, plant layout, and alternative process schemes. Safety information and a summary are also included in each. The section on transport of radioactive materials includes information on the transportation of uranium ore, uranium ore concentrate, UF/sub 6/, PuO/sub 2/ powder, unirradiated uranium and mixed-oxide fuel assemblies, spent fuel, solidified high-level waste, contact-handled transuranic waste, remote-handled transuranic waste, and low and intermediate level nontransuranic waste. A glossary is included. (JGB)

  11. Modeling of fluidized-bed combustion of coal: Phase II, final reports. Volume II. Detailed description of the model

    SciTech Connect (OSTI)

    Louis, J.F.; Tung, S.E.

    1980-10-01

    This document is the second of a seven volume series of our Phase II Final Report. This volume deals with detailed descriptions of the structure of each program member (subroutines and functions), the interrelation between the members of a submodel, and the interrelation between the various submodels as such. The systems model for fluidized bed combustors (FBC-II) consists of a systematic combination of the following interrelated areas: fluid mechanics and bubble growth, char combustion and associated kinetics for particle burnout, sulfur capture, NO/sub x/ formation and reduction, freeboard reactions, and heat transfer. Program outline is shown in Figure 1.1. Input variables (supplied by the user are inspected to check that they lie inside the allowed range of values and are input to the various routines as needed. The necessary physical and fluid mechanical properties are calculated and utilized in estimating char combustion and sulfur capture in the bed and the freeboard. NO/sub x/ and CO emissions are estimated by taking into account all relevant chemical reactions. A material and energy balance is made over the bed. Figure 1.1 shows a block diagram of the systems program. In this diagram, the overall structure of the FBC program is illustrated in terms of the various submodels that together constitute the systems program. A more detailed outline of the systems program is shown in Figure 1.2. In this figure, all important subroutine members of the FBC program are shown, and their linkage to each other, as well as to the main program is indicated. A description of the exact sequence in which these various routines are called at time of program execution is provided in Chapter 8 under the executive routine MAIN.

  12. Baseline tests for arc melter vitrification of INEL buried wastes. Volume 1: Facility description and summary data report

    SciTech Connect (OSTI)

    Oden, L.L.; O`Connor, W.K.; Turner, P.C.; Soelberg, N.R.; Anderson, G.L.

    1993-11-19

    This report presents field results and raw data from the Buried Waste Integrated Demonstration (BWID) Arc Melter Vitrification Project Phase 1 baseline test series conducted by the Idaho National Engineering Laboratory (INEL) in cooperation with the U.S. Bureau of Mines (USBM). The baseline test series was conducted using the electric arc melter facility at the USBM Albany Research Center in Albany, Oregon. Five different surrogate waste feed mixtures were tested that simulated thermally-oxidized, buried, TRU-contaminated, mixed wastes and soils present at the INEL. The USBM Arc Furnace Integrated Waste Processing Test Facility includes a continuous feed system, the arc melting furnace, an offgas control system, and utilities. The melter is a sealed, 3-phase alternating current (ac) furnace approximately 2 m high and 1.3 m wide. The furnace has a capacity of 1 metric ton of steel and can process as much as 1,500 lb/h of soil-type waste materials. The surrogate feed materials included five mixtures designed to simulate incinerated TRU-contaminated buried waste materials mixed with INEL soil. Process samples, melter system operations data and offgas composition data were obtained during the baseline tests to evaluate the melter performance and meet test objectives. Samples and data gathered during this program included (a) automatically and manually logged melter systems operations data, (b) process samples of slag, metal and fume solids, and (c) offgas composition, temperature, velocity, flowrate, moisture content, particulate loading and metals content. This report consists of 2 volumes: Volume I summarizes the baseline test operations. It includes an executive summary, system and facility description, review of the surrogate waste mixtures, and a description of the baseline test activities, measurements, and sample collection. Volume II contains the raw test data and sample analyses from samples collected during the baseline tests.

  13. DESCRIPTION OF THE TRITIUM-PRODUCING BURNABLE ABSORBER ROD FOR THE COMMERCIAL LIGHT WATER REACTOR TTQP-1-015 Rev 19

    SciTech Connect (OSTI)

    Burns, Kimberly A.; Love, Edward F.; Thornhill, Cheryl K.

    2012-02-01

    Tritium-producing burnable absorber rods (TPBARs) used in the U.S. Department of Energy’s Tritium Readiness Program are designed to produce tritium when placed in a Westinghouse or Framatome 17x17 fuel assembly and irradiated in a pressurized water reactor (PWR). This document provides an unclassified description of the current design baseline for the TPBARs. This design baseline is currently valid only for Watts Bar reactor production cores. A description of the Lead Use TPBARs will not be covered in the text of the document, but the applicable drawings, specifications and test plan will be included in the appropriate appendices.

  14. Supercomputing Challenge Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    program that teaches mid school and high school students how to use powerful computers to model real-world problems and to explore computational approaches to their...

  15. Description of Detailed Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    for the 1999 Commercial Buildings Energy Consumption Survey (CBECS) consists of building characteristics tables B1 through B39, which contain the number of buildings and...

  16. Detailed Course Module Description

    Energy Savers [EERE]

    ... (district heating and cooling, landfill gas generation, etc.) 14. Putting it all ... building performance to financing and insurance: e.g. energy improvement mortgages * ...

  17. Plan Descriptions & Summaries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high-efficiency perovskite solar cells Researchers reveal a new solution-based hot-casting technique that allows growth of highly efficient and reproducible solar cells from...

  18. PARS II Course Descriptions

    Broader source: Energy.gov [DOE]

    Sign up for PARS 102 or PARS 103, depending on your project assessment role and function.  PARS 104 will be offered to site contractors as part of Dekker's Contractor deployment training.

  19. Portsmouth Site Description

    Broader source: Energy.gov [DOE]

    The Portsmouth site is in rural Pike County, Ohio, north of the city of Portsmouth. It is located on a federal reservation that encompasses 3,777 acres. The site employs more than 2,000 workers, making it one of the largest employers in the region. It consists of three operational areas: the gaseous diffusion plant, centrifuge facility and depleted uranium hexafluoride conversion facility.

  20. Description of Chart

    U.S. Energy Information Administration (EIA) Indexed Site

    Restructuring by State Map. State: 51 items, 51 with data. Alabama is 0. Value is in the Not Active range, Alabama Deregulation: NO Retail Choice: NO Click for more information (State Restructuring Activities: None since 10/2000), Detail for AL. Arkansas is 9. Value is in the Suspended range, Arkansas Deregulation: SUSPENDED Retail Choice: NO Click for more information (State Restructuring Activities: None since 03/2003), Detail for AR. Arizona is 9. Value is in the Suspended range, Arizona

  1. Supercomputing Challenge Program Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supercomputers Deploying some of the world's fastest supercomputers is among ASC's accomplishments in advanced computing. However, it is not all about speed. Each new system is engineered to bring certain capabilities to bear on the problems of modeling and simulation that will enhance the overall goals of the Science-Based Stockpile Stewardship Program. The ASC platform acquisition strategy includes two computing platform classes: Commodity Technology (CT) systems and Advanced Technology (AT)

  2. Modeling Excited States in TiO2 Nanoparticles: On the Accuracy of a TD-DFT Based Description

    SciTech Connect (OSTI)

    Berardo, Enrico; Hu, Hanshi; Shevlin, S. A.; Woodley, Scott M.; Kowalski, Karol; Zwijnenburg, Martijn A.

    2014-03-11

    We have investigated the suitability of Time-Dependent Density Functional Theory (TD-DFT) to describe vertical low-energy excitations in naked and hydrated titanium dioxide nanoparticles through a comparison with results from Equation-of-Motion Coupled Cluster (EOM-CC) quantum chemistry methods. We demonstrate that for most TiO2 nanoparticles TD-DFT calculations with commonly used exchange-correlation (XC-)potentials (e.g. B3LYP) and EOM-CC methods give qualitatively similar results. Importantly, however, we also show that for an important subset of structures, TD-DFT gives qualitatively different results depending upon the XC-potential used and that in this case only TD-CAM-B3LYP and TD-BHLYP calculations yield results that are consistent with those obtained using EOM-CC theory. Moreover, we demonstrate that the discrepancies for such structures arise from a particular combination of defects, excitations involving which are charge-transfer excitations and hence are poorly described by XC-potentials that contain no or low fractions of Hartree-Fock like exchange. Finally, we discuss that such defects are readily healed in the presence of ubiquitously present water and that as a result the description of vertical low-energy excitations for hydrated TiO2 nanoparticles is hence non-problematic.

  3. Unified description of 6Li structure and deuterium-4He dynamics with chiral two- and three-nucleon forces

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hupin, Guillaume; Quaglioni, Sofia; Navratil, Petr

    2015-05-29

    Here, we provide a unified ab initio description of the 6Li ground state and elastic scattering of deuterium (d) on 4He (α) using two- and three-nucleon forces from chiral effective field theory. We analyze the influence of the three-nucleon force and reveal the role of continuum degrees of freedom in shaping the low-lying spectrum of 6Li. The calculation reproduces the empirical binding energy of 6Li, yielding an asymptotic D- to S-state ratio of the 6Li wave function in the d+α configuration of –0.027, in agreement with a determination from 6Li–4He elastic scattering, but overestimates the excitation energy of the 3+more » state by 350 keV. The bulk of the computed differential cross section is in good agreement with data. These results endorse the application of the present approach to the evaluation of the 2H(α,γ)6Li radiative capture, responsible for the big-bang nucleosynthesis of 6Li.« less

  4. MHD advanced power train. Phase 1, Final report: Volume 3, Power train system description and specification for 200MWe Plant

    SciTech Connect (OSTI)

    Jones, A.R.

    1985-08-01

    This System Design Description and Specification provides the basis for the design of the magnetohydrodynamic (MHD) Power Train (PT) for a nominal 200 MWe early commercial tiHD/Steam Power Plant. This document has been developed under Task 2, Conceptual Design, of Contract DE-AC22-83PC60575 and is to be used by the project as the controlling and coordinating documentation during future design efforts. Modification and revision of this specification will occur as the design matures, and tiie-Westinghouse MHD Project Manager will be the focal point for maintaining this document and issuing periodic revisions. This document is intended to delineate the power train and-power train components requirements and assumptions that properly reflect the MHD/Steam Power Plant in the PT design. The parameters discussed in this document have been established through system calculations as well as through constraints set by technology and by limitations on materials, cost, physical processes associated with MHD, and the expected operating data for the plant. The specifications listed in this document have precedence over all referenced documents. Where this specification appears to conflict with the requirements of a reference document, such conflicts should be brought to the attention of the Westinghouse MHD Project Manager for resolution.

  5. Description of the stand-damage model: Part of the gypsy moth life system model. Forest Service general technical report (Final)

    SciTech Connect (OSTI)

    Colbert, J.J.; Sheehan, K.A.

    1995-08-16

    This document describes the structure, organization, and mathematical formulations for the Stand-Damage Model and the Biological basis for these formulations. Growth, mortality, and regeneration are modeled along with the effects of user-prescribed defoliation and stand-management actions. The appendices provide a full description of the logic and mathematics in the form of code listings, structure charts, and files.

  6. Description and Evaluation of Tropospheric Chemistry and Aerosols in the Community Earth System Model (CESM1.2)

    SciTech Connect (OSTI)

    Tilmes, S.; Lamarque, J.-F.; Emmons, L.; Kinnison, Douglas E.; Ma, Po-Lun; Liu, Xiaohong; Ghan, Steven J.; Bardeen, C.; Arnold, S.; Deeter, M.; Vitt, Francis; Ryerson, T. B.; Elkins, J. W.; Moore, F.; Spackman, R.; Martin, M. V.

    2015-01-01

    The Community Atmosphere Model (CAM), version 5, is now coupled to extensive tropospheric and stratospheric chemistry, called CAM5-chem, and is available in addition to CAM4-chem in the Community Earth System Model (CESM) version 1.2. Both configurations are well suited as tools for atmospheric-chemistry modeling studies in the troposphere and lower stratosphere, whether with internally derived free running (FR) meteorology, or specified dynamics (SD). The main focus of this paper is to compare the performance of these configurations against observations from surface, aircraft, and satellite, as well as understand the origin of the identified differences. We particularly focus on comparing present-day methane lifetime estimates within the different model configurations, which range between 7.8 years in the SD configuration of CAM5-chem and 8.8 years in the FR configuration of CAM4-chem. We find that tropospheric surface area density is an important factor in controlling the burden of the hydroxyl radical (OH), which causes differences in tropical methane lifetime of about half a year between CAM4-chem and CAM5-chem. In addition, different distributions of nitrogen oxides (NOx) produced from lightning production explain about half of the difference between SD and FR model versions in both CAM4-chem and CAM5-chem. Remaining differences in the tropical OH burden are due to enhanced tropical ozone burden in SD configurations compared to the FR versions, which are not only caused by differences in chemical production or loss, but also by transport and mixing. For future studies, we recommend the use of CAM5-chem, due to improved aerosol description and inclusion of aerosol-cloud interactions. However, smaller tropospheric surface area density in the current version of CAM5-chem compared to CAM4-chem results in larger oxidizing capacity in the troposphere and therefore a shorter methane lifetime.

  7. Description and Evaluation of Tropospheric Chemistry and Aerosols in the Community Earth System Model (CESM1.2)

    SciTech Connect (OSTI)

    Tilmes, S.; Lamarque, J. -F.; Emmons, L.; Kinnison, Douglas E.; Ma, Po-Lun; Liu, Xiaohong; Ghan, Steven J.; Bardeen, C.; Arnold, S.; Deeter, M.; Vitt, Francis; Ryerson, T. B.; Elkins, J. W.; Moore, F.; Spackman, R.; Martin, M. V.

    2015-05-13

    The Community Atmosphere Model (CAM), version 5, is now coupled to extensive tropospheric and stratospheric chemistry, called CAM5-chem, and is available in addition to CAM4-chem in the Community Earth System Model (CESM) version 1.2. Both configurations are well suited as tools for atmospheric-chemistry modeling studies in the troposphere and lower stratosphere, whether with internally derived free running (FR) meteorology, or specified dynamics (SD). The main focus of this paper is to compare the performance of these configurations against observations from surface, aircraft, and satellite, as well as understand the origin of the identified differences. We particularly focus on comparing present-day methane lifetime estimates within the different model configurations, which range between 7.8 years in the SD configuration of CAM5-chem and 8.8 years in the FR configuration of CAM4-chem. We find that tropospheric surface area density is an important factor in controlling the burden of the hydroxyl radical (OH), which causes differences in tropical methane lifetime of about half a year between CAM4-chem and CAM5-chem. In addition, different distributions of nitrogen oxides (NOx) produced from lightning production explain about half of the difference between SD and FR model versions in both CAM4-chem and CAM5-chem. Remaining differences in the tropical OH burden are due to enhanced tropical ozone burden in SD configurations compared to the FR versions, which are not only caused by differences in chemical production or loss, but also by transport and mixing. For future studies, we recommend the use of CAM5-chem, due to improved aerosol description and inclusion of aerosol-cloud interactions. However, smaller tropospheric surface area density in the current version of CAM5-chem compared to CAM4-chem results in larger oxidizing capacity in the troposphere and therefore a shorter methane lifetime.

  8. Description and Evaluation of Tropospheric Chemistry and Aerosols in the Community Earth System Model (CESM1.2)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tilmes, S.; Lamarque, J. -F.; Emmons, L.; Kinnison, Douglas E.; Ma, Po-Lun; Liu, Xiaohong; Ghan, Steven J.; Bardeen, C.; Arnold, S.; Deeter, M.; et al

    2015-05-13

    The Community Atmosphere Model (CAM), version 5, is now coupled to extensive tropospheric and stratospheric chemistry, called CAM5-chem, and is available in addition to CAM4-chem in the Community Earth System Model (CESM) version 1.2. Both configurations are well suited as tools for atmospheric-chemistry modeling studies in the troposphere and lower stratosphere, whether with internally derived “free running” (FR) meteorology, or “specified dynamics” (SD). The main focus of this paper is to compare the performance of these configurations against observations from surface, aircraft, and satellite, as well as understand the origin of the identified differences. We particularly focus on comparing present-daymore » methane lifetime estimates within the different model configurations, which range between 7.8 years in the SD configuration of CAM5-chem and 8.8 years in the FR configuration of CAM4-chem. We find that tropospheric surface area density is an important factor in controlling the burden of the hydroxyl radical (OH), which causes differences in tropical methane lifetime of about half a year between CAM4-chem and CAM5-chem. In addition, different distributions of nitrogen oxides (NOx) produced from lightning production explain about half of the difference between SD and FR model versions in both CAM4-chem and CAM5-chem. Remaining differences in the tropical OH burden are due to enhanced tropical ozone burden in SD configurations compared to the FR versions, which are not only caused by differences in chemical production or loss, but also by transport and mixing. For future studies, we recommend the use of CAM5-chem, due to improved aerosol description and inclusion of aerosol-cloud interactions. However, smaller tropospheric surface area density in the current version of CAM5-chem compared to CAM4-chem results in larger oxidizing capacity in the troposphere and therefore a shorter methane lifetime.« less

  9. ," Excise"," LUST Fee ",," Total",," Excise"," LUST Fee ",," Total",,"Notes"

    U.S. Energy Information Administration (EIA) Indexed Site

    Federal and state motor fuels taxes[1] " ," Gasoline ",,,,," Diesel" ," Excise"," LUST Fee ",," Total",," Excise"," LUST Fee ",," Total",,"Notes" "Federal",0.183,0.001,,0.184,,0.243,0.001,,0.244,,"Leaking Underground Storage Tank (LUST) fee: $0.001/gal. " ," Gasoline ",,,,," Diesel" ,"State tax","Other taxes & Fees[2] ","Total

  10. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Oak Ridge Gaseous Diffusion Plant Site

    SciTech Connect (OSTI)

    Not Available

    1991-09-01

    In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) technology, with the near-term goal to provide the necessary information to make a deployment decision by November 1992. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. A programmatic document for use in screening DOE sites to locate the U-AVLIS production plant was developed and implemented in two parts (Wolsko et al. 1991). The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were then subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the ORGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use, socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3. Following the site description and additional data requirements, Sec. 4 provides a short, qualitative assessment of potential environmental issues. 37 refs., 20 figs., 18 tabs.

  11. Descriptions and diagrams of the primary and annulus ventilation systems of the double-shell tank farms as of January 1988

    SciTech Connect (OSTI)

    Blackman, A.E.; Waters, E.D.

    1994-12-28

    This document is a compilation of information describing the ventilation systems of the Double-Shell Tank farms (214-AN, -AP, -AW, -AW, -AY, -AZ, and -SY). A general description of the primary tank and annulus ventilation systems is given along with specific information on the high efficiency particulate air (HEPA) filters, condensers, preheaters, exhaust fans, and piping. This information is considered to be current as of January 1988. 38 refs, 20 figs, 30 tabs.

  12. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Portsmouth Gaseous Diffusion Plant site

    SciTech Connect (OSTI)

    Marmer, G.J.; Dunn, C.P.; Filley, T.H.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. In the 1970s, the US Department of Energy (DOE) began investigating more efficient and cost-effective enrichment technologies. In January 1990, the Secretary of Energy approved a plan for the demonstration and deployment of the Uranium Atomic Vapor Laser isotope Separation (U-AVLIS) technology with the near-term goal to provide the necessary information to make a deployment decision by November 1992. Initial facility operation is anticipated for 1999. A programmatic document for use in screening DOE sites to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. The final evaluation, which included sensitivity studies, identified the Oak Ridge Gaseous Diffusion Plant (ORGDP) site, the Paducah Gaseous Diffusion Plant (PGDP) site, and the Portsmouth Gaseous Diffusion Plant (PORTS) site as having significant advantages over the other sites considered. This environmental site description (ESD) provides a detailed description of the PORTS site and vicinity suitable for use in an environmental impact statement (EIS). This report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during site visits. The organization of the ESD is as follows. Topics addressed in Sec. 2 include a general site description and the disciplines of geology, water resources, biotic resources, air resources, noise, cultural resources, land use. Socioeconomics, and waste management. Identification of any additional data that would be required for an EIS is presented in Sec. 3.

  13. Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle description

    SciTech Connect (OSTI)

    Not Available

    1980-06-01

    The Nonproliferation Alterntive Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates.

  14. On-line Chemistry within WRF: Description and Evaluation of a State-of-the-Art Multiscale Air Quality and Weather Prediction Model

    SciTech Connect (OSTI)

    Grell, Georg; Fast, Jerome D.; Gustafson, William I.; Peckham, Steven E.; McKeen, Stuart A.; Salzmann, Marc; Freitas, Saulo

    2010-01-01

    This is a conference proceeding that is now being put together as a book. This is chapter 2 of the book: "INTEGRATED SYSTEMS OF MESO-METEOROLOGICAL AND CHEMICAL TRANSPORT MODELS" published by Springer. The chapter title is "On-line Chemistry within WRF: Description and Evaluation of a State-of-the-Art Multiscale Air Quality and Weather Prediction Model." The original conference was the COST-728/NetFAM workshop on Integrated systems of meso-meteorological and chemical transport models, Danish Meteorological Institute, Copenhagen, May 21-23, 2007.

  15. Revenue Requirements Modeling System (RRMS) documentation. Volume I. Methodology description and user's guide. Appendix A: model abstract; Appendix B: technical appendix; Appendix C: sample input and output. [Compustat

    SciTech Connect (OSTI)

    Not Available

    1986-03-01

    The Revenue Requirements Modeling System (RRMS) is a utility specific financial modeling system used by the Energy Information Administration (EIA) to evaluate the impact on electric utilities of changes in the regulatory, economic, and tax environments. Included in the RRMS is a power plant life-cycle revenue requirements model designed to assess the comparative economic advantage of alternative generating plant. This report is Volume I of a 2-volume set and provides a methodology description and user's guide, a model abstract and technical appendix, and sample input and output for the models. Volume II provides an operator's manual and a program maintenance guide.

  16. Flat-Panel Cone-Beam Ct-Guided Radiofrequency Ablation of Very Small (≤1.5 cm) Liver Tumors: Technical Note on a Preliminary Experience

    SciTech Connect (OSTI)

    Cazzato, Roberto Luigi Buy, Xavier Alberti, Nicolas Fonck, Mariane; Grasso, Rosario Francesco; Palussière, Jean

    2015-02-15

    PurposeThe aim of the present study was to investigate the technical feasibility of flat-panel cone-beam CT (CBCT)-guided radiofrequency ablation (RFA) of very small (<1.5 cm) liver tumors.Materials and MethodsPatients included were candidates for hepatic percutaneous RFA as they had single biopsy-proven hepatic tumors sized ≤1.5 cm and poorly defined on ultrasonography. Following apnea induction, unenhanced CBCT scans were acquired and used to deploy the RF electrode with the aid of a virtual navigation system. If the tumor was not clearly identified on the unenhanced CBCT scan, a right retrograde arterial femoral access was established to carry out hepatic angiography and localize the tumor. Patients’ lesions and procedural variables were recorded and analyzed.ResultsThree patients (2 male and 1 female), aged 68, 76, and 87 years were included; 3 lesions (2 hepato-cellular carcinoma and 1 metastasis from colorectal cancer) were treated. One patient required hepatic angiography. Cycles of apnea used to acquire CBCT images and to deploy the electrode lasted <120 s. Mean fluoroscopic time needed to deploy the electrode was 36.6 ± 5.7 min. Mean overall procedural time was 66.0 ± 22.9 min. No peri- or post-procedural complications were noted. No cases of incomplete ablation were noted at 1-month follow-up.ConclusionPercutaneous CBCT-guided liver RFA with or without arterial hepatic angiography is technically feasible.

  17. Environmental site description for a Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) production plant at the Paducah Gaseous Diffusion Plant site

    SciTech Connect (OSTI)

    Marmer, G.J.; Dunn, C.P.; Moeller, K.L.; Pfingston, J.M.; Policastro, A.J.; Yuen, C.R.; Cleland, J.H.

    1991-09-01

    Uranium enrichment in the United States has utilized a diffusion process to preferentially enrich the U-235 isotope in the uranium product. The U-AVLIS process is based on electrostatic extraction of photoionized U-235 atoms from an atomic vapor stream created by electron-beam vaporization of uranium metal alloy. The U-235 atoms are ionized when precisely tuned laser light -- of appropriate power, spectral, and temporal characteristics -- illuminates the uranium vapor and selectively photoionizes the U-235 isotope. A programmatic document for use in screening DOE site to locate a U-AVLIS production plant was developed and implemented in two parts. The first part consisted of a series of screening analyses, based on exclusionary and other criteria, that identified a reasonable number of candidate sites. These sites were subjected to a more rigorous and detailed comparative analysis for the purpose of developing a short list of reasonable alternative sites for later environmental examination. This environmental site description (ESD) provides a detailed description of the PGDP site and vicinity suitable for use in an environmental impact statement (EIS). The report is based on existing literature, data collected at the site, and information collected by Argonne National Laboratory (ANL) staff during a site visit. 65 refs., 15 tabs.

  18. Benchmarking the performance of density functional theory and point charge force fields in their description of sI methane hydrate against diffusion Monte Carlo

    SciTech Connect (OSTI)

    Cox, Stephen J.; Michaelides, Angelos; Department of Chemistry, University College London, 20 Gordon Street, London WC1H 0AJ ; Towler, Michael D.; Theory of Condensed Matter Group, Cavendish Laboratory, University of Cambridge, J.J. Thomson Avenue, Cambridge CB3 0HE ; Alf, Dario; Department of Earth Sciences, University College London Gower Street, London WC1E 6BT

    2014-05-07

    High quality reference data from diffusion Monte Carlo calculations are presented for bulk sI methane hydrate, a complex crystal exhibiting both hydrogen-bond and dispersion dominated interactions. The performance of some commonly used exchange-correlation functionals and all-atom point charge force fields is evaluated. Our results show that none of the exchange-correlation functionals tested are sufficient to describe both the energetics and the structure of methane hydrate accurately, while the point charge force fields perform badly in their description of the cohesive energy but fair well for the dissociation energetics. By comparing to ice I{sub h}, we show that a good prediction of the volume and cohesive energies for the hydrate relies primarily on an accurate description of the hydrogen bonded water framework, but that to correctly predict stability of the hydrate with respect to dissociation to ice I{sub h} and methane gas, accuracy in the water-methane interaction is also required. Our results highlight the difficulty that density functional theory faces in describing both the hydrogen bonded water framework and the dispersion bound methane.

  19. Study of lubricant circulation in HVAC systems. Volume 1: Description of technical effort and results; Final technical report, March 1995--April 1996

    SciTech Connect (OSTI)

    Biancardi, F.R.; Michels, H.H.; Sienel, T.H.; Pandy, D.R.

    1996-10-01

    The purpose of this program was to conduct experimental and analytical efforts to determine lubricant circulation characteristics of new HFC/POE pairs and HFC/mineral oil pairs in a representative central residential HVAC system and to compare their behavior with the traditional HCFC-22/mineral oil (refrigerant/lubricant) pair. A dynamic test facility was designed and built to conduct the experimental efforts. This facility provided a unique capability to visually and physically measure oil circulation rates, on-line, in operating systems. A unique on-line ultraviolet-based measurement device was used to obtain detailed data on the rate and level of lubricant oil circulated within the operating heat pump system. The experimental and analytical data developed during the program are presented as a function of vapor velocity, refrigerant/lubricant viscosity, system features and equipment. Both visual observations and instrumentation were used to understand ``worst case`` oil circulation situations. This report is presented in two volumes. Volume 1 contains a complete description of the program scope, objective, test results summary, conclusions, description of test facility and recommendations for future effort. Volume 2 contains all of the program test data essentially as taken from the laboratory dynamic test facility during the sequence of runs.

  20. Process Description and Operating History for the CPP-601/-640/-627 Fuel Reprocessing Complex at the Idaho National Engineering and Environmental Laboratory

    SciTech Connect (OSTI)

    E. P. Wagner

    1999-06-01

    The Fuel Reprocessing Complex (FRC) at the Idaho Nuclear Technology and Engineering Center at the Idaho National Engineering and Environmental Laboratory was used for reprocessing spent nuclear fuel from the early 1950's until 1992. The reprocessing facilities are now scheduled to be deactivated. As part of the deactivation process, three Resource Conservation and Recovery Act (RCRA) interim status units located in the complex must be closed. This document gathers the historical information necessary to provide a rational basis for the preparation of a comprehensive closure plan. Included are descriptions of process operations and the operating history of the FRC. A set of detailed tables record the service history and present status of the process vessels and transfer lines.

  1. Idaho National Engineering and Environmental Laboratory, Old Waste Calcining Facility, Scoville vicinity, Butte County, Idaho -- Photographs, written historical and descriptive data. Historical American engineering record

    SciTech Connect (OSTI)

    1997-12-31

    This report describes the history of the Old Waste Calcining Facility. It begins with introductory material on the Idaho National Engineering and Environmental Laboratory, the Materials Testing Reactor fuel cycle, and the Idaho Chemical Processing Plant. The report then describes management of the wastes from the processing plant in the following chapters: Converting liquid to solid wastes; Fluidized bed waste calcining process and the Waste Calcining Facility; Waste calcining campaigns; WCF gets a new source of heat; New Waste Calcining Facility; Last campaign; Deactivation and the RCRA cap; Significance/context of the old WCF. Appendices contain a photo key map for HAER photos, a vicinity map and neighborhood of the WCF, detailed description of the calcining process, and chronology of WCF campaigns.

  2. A preliminary regional PBPK model of lung metabolism for improving species dependent descriptions of 1,3-butadiene and its metabolites

    SciTech Connect (OSTI)

    Campbell, Jerry; Van Landingham, Cynthia; Crowell, Susan; Gentry, Robinan; Kaden, Debra; Fiebelkorn, Stacy; Loccisano, Anne; Clewell, Harvey

    2015-06-12

    1,3-Butadiene (BD), a volatile organic chemical (VOC), is used in synthetic rubber production and other industrial processes. It is detectable at low levels in ambient air as well as in tobacco smoke and gasoline vapors. Inhalation exposures to high concentrations of BD have been associated with lung cancer in both humans and experimental animals, although differences in species sensitivity have been observed. Metabolically active lung cells such as Pulmonary Type I and Type II epithelial cells and club cells (Clara cells)1 are potential targets of BD metabolite-induced toxicity. Metabolic capacities of these cells, their regional densities, and distributions vary throughout the respiratory tract as well as between species and cell types. Here we present a physiologically based pharmacokinetic (PBPK) model for BD that includes a regional model of lung metabolism, based on a previous model for styrene, to provide species-dependent descriptions of BD metabolism in the mouse, rat, and human. Since there are no in vivo data on BD pharmacokinetics in the human, the rat and mouse models were parameterized to the extent possible on the basis of in vitro metabolic data. Where it was necessary to use in vivo data, extrapolation from rat to mouse was performed to evaluate the level of uncertainty in the human model. A kidney compartment and description of downstream metabolism were also included in the model to allow for eventual use of available urinary and blood biomarker data in animals and humans to calibrate the model for estimation of BD exposures and internal metabolite levels. Results from simulated inhalation exposures to BD indicate that incorporation of differential lung region metabolism is important in describing species differences in pulmonary response and that these differences may have implications for risk assessments of human exposures to BD.

  3. A preliminary regional PBPK model of lung metabolism for improving species dependent descriptions of 1,3-butadiene and its metabolites

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Campbell, Jerry; Van Landingham, Cynthia; Crowell, Susan; Gentry, Robinan; Kaden, Debra; Fiebelkorn, Stacy; Loccisano, Anne; Clewell, Harvey

    2015-06-12

    1,3-Butadiene (BD), a volatile organic chemical (VOC), is used in synthetic rubber production and other industrial processes. It is detectable at low levels in ambient air as well as in tobacco smoke and gasoline vapors. Inhalation exposures to high concentrations of BD have been associated with lung cancer in both humans and experimental animals, although differences in species sensitivity have been observed. Metabolically active lung cells such as Pulmonary Type I and Type II epithelial cells and club cells (Clara cells)1 are potential targets of BD metabolite-induced toxicity. Metabolic capacities of these cells, their regional densities, and distributions vary throughoutmore » the respiratory tract as well as between species and cell types. Here we present a physiologically based pharmacokinetic (PBPK) model for BD that includes a regional model of lung metabolism, based on a previous model for styrene, to provide species-dependent descriptions of BD metabolism in the mouse, rat, and human. Since there are no in vivo data on BD pharmacokinetics in the human, the rat and mouse models were parameterized to the extent possible on the basis of in vitro metabolic data. Where it was necessary to use in vivo data, extrapolation from rat to mouse was performed to evaluate the level of uncertainty in the human model. A kidney compartment and description of downstream metabolism were also included in the model to allow for eventual use of available urinary and blood biomarker data in animals and humans to calibrate the model for estimation of BD exposures and internal metabolite levels. Results from simulated inhalation exposures to BD indicate that incorporation of differential lung region metabolism is important in describing species differences in pulmonary response and that these differences may have implications for risk assessments of human exposures to BD.« less

  4. Kinetic description of intense nonneutral beam propagation through a periodic solenoidal focusing field based on the nonlinear Vlasov-Maxwell equations

    SciTech Connect (OSTI)

    Davidson, R.C.; Chen, C.

    1997-08-01

    A kinetic description of intense nonneutral beam propagation through a periodic solenoidal focusing field B{sup sol}({rvec x}) is developed. The analysis is carried out for a thin beam with characteristic beam radius r{sub b} {much_lt} S, and directed axial momentum {gamma}{sub b}m{beta}{sub b}c (in the z-direction) large compared with the transverse momentum and axial momentum spread of the beam particles. Making use of the nonlinear Vlasov-Maxwell equations for general distribution function f{sub b}({rvec x},{rvec p},t) and self-consistent electrostatic field consistent with the thin-beam approximation, the kinetic model is used to investigate detailed beam equilibrium properties for a variety of distribution functions. Examples are presented both for the case of a uniform solenoidal focusing field B{sub z}(z) = B{sub 0} = const. and for the case of a periodic solenoidal focusing field B{sub z}(z + S) = B{sub z}(z). The nonlinear Vlasov-Maxwell equations are simplified in the thin-beam approximation, and an alternative Hamiltonian formulation is developed that is particularly well-suited to intense beam propagation in periodic focusing systems. Based on the present analysis, the Vlasov-Maxwell description of intense nonneutral beam propagation through a periodic solenoidal focusing field {rvec B}{sup sol}({rvec x}) is found to be remarkably tractable and rich in physics content. The Vlasov-Maxwell formalism developed here can be extended in a straightforward manner to investigate detailed stability behavior for perturbations about specific choices of beam equilibria.

  5. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    and alcohol purity specifications (commonly referred to as the "DuPont" waiver). ... and alcohol purity specifications (commonly referred to as the "DuPont" waiver). ...

  6. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    ... by weight, and the blend must meet ASTM volatility specifications as well as phase separation and alcohol purity specifications (commonly referred to as the "DuPont" waiver). ...

  7. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    by weight, and the blend must meet ASTM volatility specifications as well as phase separation and alcohol purity specifications (commonly referred to as the "DuPont" waiver). ...

  8. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    ... and alcohol purity specifications (commonly referred to as the "DuPont" waiver). ... and alcohol purity specifications (commonly referred to as the "DuPont" waiver). ...

  9. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    American Petroleum Institute, "Joint Association Survey on Drilling Costs". Explanatory ... Average cost is the arithmetic mean and includes all costs for drilling and equipping ...

  10. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    The area of a gas reservoir considered proved includes: (1) that portion delineated by drilling and defined by gas -- oil andor gas -- water contacts, if any; and (2) the ...

  11. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    includes: (1) that portion delineated by drilling and defined by gas -- oil andor gas -- ... includes: (1) that portion delineated by drilling and defined by gas -- oil andor gas -- ...

  12. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Institute, "Quarterly Review of Drilling Statistics for the United States", ... These well counts include only the original drilling of a hole intended to discover or ...

  13. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Field A storage facility that is a cavern hollowed out in either a salt "bed" or "dome" formation. Withdrawals The volume of gas withdrawn from storage reservoirs. Working...

  14. Table Definitions, Sources, and Explanatory Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sector that consists of electricity-only and combined heat and power (CHP) plants whose primary ... The facilities are usually hollowed-out salt domes, geological ...

  15. COLLOQUIUM: NOTE SPECIAL DATE - THURSDAY: Unique Vulnerability...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This is because of the region's unique topographic, oceanographic, geologic, and demographic factors. In addition, hurricanes become more dangerous as they increase their...

  16. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Key Terms Definition API Gravity An arbitrary scale expressing the gravity or density of ... propane, and butane; and many other products used for their energy or chemical content. ...

  17. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    arbitrary scale expressing the gravity or density of liquid petroleum products. ... For definitions of related energy terms, refer to the EIA Energy Glossary. Sources 1973-1978: ...

  18. Table Definitions, Sources, and Explanatory Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    arbitrary scale expressing the gravity or density of liquid petroleum products. ... For definitions of related energy terms, refer to the EIA Energy Glossary. Sources Energy ...

  19. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    are calculated from a combination of both types of prices. The price of LNG exports to Japan is the landed price, defined as received at the terminal in Japan. Annual and...

  20. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    various metals; Drip gases, and liquid hydrocarbons produced from tar sands, oil sands, gilsonite, and oil shale. Liquids produced at natural gas processing plants are excluded. ...

  1. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Field Production Represents crude oil production on leases, natural gas liquids production at natural gas processing plants, new supply of other hydrocarbonsoxygenates and motor ...

  2. Table Definitions, Sources, and Explanatory Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    either as free gas (associated) or as gas in solution with crude oil (dissolved). ... condensation, adsorption, or other methods in gas processing or cycling plants. ...

  3. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    as sulfur and various metals; Drip gases, and liquid hydrocarbons produced from tar sands, gilsonite, and oil shale. Liquids produced at natural gas processing plants are excluded. ...

  4. LLW Notes, Volume 12, Number 6

    SciTech Connect (OSTI)

    Norris, C.; Brown, H.; Gedden, R.; Lovinger, T.; Scheele, L.; Shaker, M.A.

    1997-07-01

    Contents include articles entitled: GAO concludes most Ward Valley SEIS issues previously addressed; Midwest compact halts facility development; Texas publishes proposal to issue WCS radioactive materials license; Central Compact issues export authorizations over NE`s objection; Nebraska governor to host LLRW summit; California regulators reassured re US ecology facility in WA; Southeast Compact augments funding for North Carolina; State and compact calendar of events; IAEA Director General to UN: reexamine nuclear power; DOI convenes meetings on Ward Valley Title VI complaint; California BLM: Tribes fully represented and consulted; MW, NE, and SW file amici curiae briefs in Ward Valley suit; Court denies state`s motion for protective order; WCS files suit against Envirocare and others; States attack DOE`s claim re lack of authority to store spent fuel; House committee passes Texas legislation; Ward Valley land transfer bill introduced in Senate; Senate committee holds hearing on Ward Valley legislation and related GAO report; NRDC threatens to sue DOE re Envirocare; NRC chair criticizes Deputy Interior Secretary`s use of Ward Valley fact sheet; Utility consortium submits license application for storage on Goshute land to NRC; Envirocare cited for SNM violation; EPA begins audit; and EPA rejects Title VI claim re Texas site.

  5. LLW Notes supplement, Volume 12, Number 6

    SciTech Connect (OSTI)

    1997-07-01

    Contents include articles related to environmental justice concerns and Title VI, entitled as follows: Civil Rights Act of 1964; Exec order on environmental justice; Applicability to states; Philosophical differences -- Environmental justice and Title VI; Ambiguities in existing Title VI guidance; Clarification of existing Title VI guidance; Federal financial assistance; Administrative complaints vs. lawsuits; Effect and disparate impact; Termination, suspension or refusal to grant federal financial assistance; DOJ guidance defines environmental justice; NEJAC meets, adopts far-reaching resolution re siting; Indigenous Peoples Resolution No. 23; and States meet, support environmental justice concept and express concerns about federal approach and composition of NEJAC.

  6. LLW Notes, Volume 12, Number 2

    SciTech Connect (OSTI)

    Norris, C.; Brown, H.; Colsant, J.; Lovinger, T.; Scheele, L.; Shaker, M.A.

    1997-02-01

    Contents include the following articles: National Environmental Justice Advisory Council considers Ward Valley resolution; NGA urges Congressional and Presidential support for low-level radioactive waste compacts and transfer of federal land in Ward Valley; RFP issued for SEIS on Ward Valley land transfer; Illinois siting criteria finalized; Consideration of tribal concerns during Ward Valley siting process; State legislators` LLRW working group meets in D.C.; Upcoming state and compact events; Court calendar; Texas compact legislation introduced in Congress; Superfund reform is a priority for 105th Congress; High-level waste bill gets off to an early start; Fort Mojave petition NEJAC for Ward Valley resolution; EPA withdraws cleanup rule from OMB; Board ruling raises doubts about proposed Louisiana enrichment facility; DOE recommends external regulation by NRC; and Supplement--Background on environmental justice.

  7. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Electric Power Sector An energy-consuming sector that consists of electricity-only and combined heat and power (CHP) plants whose primary business is to sell electricity, or ...

  8. LLW Notes, Volume 12, Number 5

    SciTech Connect (OSTI)

    Norris, C.; Brown, H.; Gedden, R.; Lovinger, T.; Scheele, L.; Shaker, M.A.

    1997-06-01

    Contents include articles entitled: USGS report supports previous conclusions re tritium migration at Beatty; Ohio selects new contractor for screening; Maine Yankee`s future uncertain; Southeast Compact limits funds for North Carolina project; California, Energy, and Interior exchange correspondence on Ward Valley testing; TCC meets in Salt Lake City, Utah; Garner named executive director and forum participant for Northwest Compact; Seventh Circuit upholds Energy Secretary`s determination re distribution of surcharge rebates; US Ecology sues Nebraska re wetlands mitigation; US Supreme Court hears line-item veto challenge; Court rules NAS must provide public access; WCS sues Envirocare of Texas; DOE and Envirocare sign consent agreement; NRC issues performance assessment guidance; NRC to publish final decommissioning rule; House subcommittee passes Texas Consent Act; Environmental justice bill introduced in the House; and International nuclear safety body established.

  9. Explanatory notes for research cell efficiency records

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    60904-3 edition 2 or ASTM G173. The reference temperature is 25C and the area is the cell total area or the area defined by an aperture. Cell efficiency results are provided...

  10. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    of such production for a given period is measured as volumes delivered from lease storage tanks (i.e., the point of custody transfer) to pipelines, trucks, or other media for...

  11. RAP Committee Meeting - Transcribed Flipchart Notes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May 8, 2013 Follow Up 1. Send 300 Area advice to committee for final consensus review 2. SAME for 100 F advice 3. SAME for LTS advice 4. Future discussion of GW questions...

  12. LLW Notes, Volume 12, Number 4

    SciTech Connect (OSTI)

    Norris, C.; Brown, H.; Gedden, R.; Lovinger, T.; Scheele, L.; Shaker, M.A.

    1997-04-01

    Contents include articles entitled: Texas Authority`s funding pending before conference committee: Auditor`s report favors authority; Revisions likely for Illinois siting law; Midwest Compact votes on Ohio fundings: Less approved than requested; Walter Sturgeon named executive director of North Carolina authority; New forum participant for Massachusetts; CRCPD holds fifth workshop for LLRW regulators; DOD generators hold annual meeting; State legislators` LLRW working group meets; NRC Chairman Jackson responds to proposal to amend the Policy Act; US Ecology uses to recover costs and lost profits and/or to compel Ward Valley land transfer; New suit against Envirocare and others alleges unlawful business practices; Federal court finds line-item veto unconstitutional; States/utilities seek to escrow nuclear waste payments; High-level waste bill passes Senate; NRC releases decommissioning rule; EPA Region VI re La Paz Agreement; EPA, NRC debate NRC`s decommissioning rule: No progress re approaches to risk harmonization; and Mousseau heads DOE`s national low-level waste management program.

  13. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Heating Oil & Propane Prices Definitions Key Terms ... capacity commercial-industrial burner units, with ... Prices do not include taxes paid by the consumer. ...

  14. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Road Oil Any heavy petroleum oil, including residual asphaltic oil used as a dust pallative and surface treatment on roads and highways. It is generally produced in six grades from ...

  15. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Qualities of Crude Oil Input Definitions Key Terms Definition API Gravity An arbitrary ... Light crudes generally exceed 38 degrees API and heavy crudes are commonly labeled as all ...

  16. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... fuel oil, and heavy gas oil) and other petroleum (e.g., cat cracked naphtha, coker naphtha, gas oil, etc.) in the presence of catalysts and substantial quantities of hydrogen. ...

  17. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    ... Reservoirs are considered proved if economic producibility is supported by actual production or conclusive formation test (drill stem or wire line), or if economic producibility is ...

  18. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Octane Rating A number used to indicate gasoline's antiknock performance in motor vehicle engines. The two recognized laboratory engine test methods for determining the antiknock ...

  19. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Reservoirs are considered proved if economic producibility is supported by actual production or conclusive formation test (drill stem or wire line), or if economic producibility is ...

  20. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    actual production or conclusive formation test (drill stem or wire line), or if economic ... actual production or conclusive formation test (drill stem or wire line), or if economic ...

  1. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ton. Barrel A unit of volume equal to 42 U.S. gallons. Biomass-Based Diesel Fuel Biodiesel and other renewable diesel fuel or diesel fuel blending components derived from...

  2. Property:CompletionNotes | Open Energy Information

    Open Energy Info (EERE)

    eset-345kv-transmission-line-project-north B BLM-NV-WN-ES-08-01-1310, NV-020-08-01 + 82: Data reviewed for completion Barren Ridge Renewable Transmission + LADWP Project Website:...

  3. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    footage drilled in connection with reported wells, and (3) all new footage drilled for directional sidetrack wells. Footage reported for directional sidetrack wells does not...

  4. Notes on a New Coherence Estimator

    SciTech Connect (OSTI)

    Bickel, Douglas L.

    2016-01-01

    This document discusses some interesting features of the new coherence estimator in [1] . The estimator is d erived from a slightly different viewpoint. We discuss a few properties of the estimator, including presenting the probability density function of the denominator of the new estimator , which is a new feature of this estimator . Finally, we present an appr oximate equation for analysis of the sensitivity of the estimator to the knowledge of the noise value. ACKNOWLEDGEMENTS The preparation of this report is the result of an unfunded research and development activity. Sandia National Laboratories is a multi - program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE - AC04 - 94AL85000.

  5. Low Income Workgroup Meeting Notes Portland, Oregon

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tri-cities, so the utility runs workshop ads out right after that first big bill. Has a prop house and Todd installs the entire kit. Funds come from public information budget...

  6. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Power Sector Fuel Use in EIA Publications and Analysis. Beginning with 1980 data, dry production and consumption volumes include supplemental gas supplies, and storage ...

  7. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    limitations that may delay, interrupt, or slow down production: the capability of downstream facilities to absorb the output of crude oil processing facilities of a given refinery. ...

  8. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    and remains liquid at atmospheric pressure after passing through surface separating facilities. Depending upon the characteristics of the crude stream, it may also include: Small...

  9. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    on-highway diesel fuel, or propane for on-highway vehicle use which is under the direct control of the firm filing the EIA-782 by virtue of the ability to set the retail product...

  10. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Definitions Key Terms Definition Barrel A unit of volume equal to 42 U.S. gallons. Imports Receipts of crude oil and petroleum products into the 50 States and the District of ...

  11. Topic A Note: Includes STEPS Subtopic

    Energy Savers [EERE]

    Top Better Buildings Beat Articles for February Top Better Buildings Beat Articles for February March 4, 2016 - 9:54am Addthis Top Better Buildings Beat Articles for February By Monica Kanojia You want a rundown of the Better Buildings Beat blog's commercial sector-relevant, and we've got them. Check out February's list of Beat articles to get caught up on the progress being made by Better Buildings Partners in the market toward breaking various barriers to energy efficiency. Florida Better

  12. Notes on the MUF-D statistic

    SciTech Connect (OSTI)

    Picard, R.R.

    1987-01-01

    Many aspects of the MUF-D statistic, used for verification of accountability data, have been examined in the safeguards literature. In this paper, basic MUF-D results are extended to more general environments than are usually considered. These environments include arbitrary measurement error structures, various sampling regimes that could be imposed by the inspectorate, and the attributes/variables framework.

  13. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    and many other products used for their energy or chemical content. F.O.B. Price (Free on Board) The price actually charged at the producing country's port of loading. The...

  14. Customer-Based Revenue Streams-- Notes

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program October 2011 Workshop, Summary of Revenue Streams from Breakout Sessions (11/20/11).

  15. Financial Institution-Based Revenue Streams-- Notes

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program October 2011 Workshop, Summary of Revenue Streams from Breakout Sessions (11/20/11).

  16. Contractor-Based Revenue Streams-- Notes

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program October 2011 Workshop, Summary of Revenue Streams from Breakout Sessions (11/20/11).

  17. Utility-Based Revenue Streams-- Notes

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program October 2011 Workshop Summary of Revenue Streams from Breakout Sessions (11/20/11).

  18. Local Government-Based Revenue Streams-- Notes

    Broader source: Energy.gov [DOE]

    Better Buildings Neighborhood Program October 2011 Workshop, Summary of Revenue Streams from Breakout Sessions (11/20/11).

  19. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Costs of Crude Oil and Natural Gas Wells Drilled Definitions Key Terms Definition Crude Oil A mixture of hydrocarbons that exists in liquid phase in natural underground reservoirs...

  20. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Underground Storage - All Operators Definitions Key Terms Definition AGA Eastern Consuming Region All States east of the Mississippi River less Mississippi and Alabama, plus Iowa,...

  1. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    and Value of Natural Gas Production Report" , EIA estimates based on data from the Bureau of Safety and Environmental Enforcement, and predecessor agencies; state agencies; and...

  2. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    and brought into the U.S. Landed Cost The dollar per barrel price of crude oil at the port of discharge. Includes charges associated with the purchase, transportation, and...

  3. Table Definitions, Sources, and Explanatory Notes

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    F.O.B. Price (Free on Board) The price actually charged at the producing country's port of loading. The reported price includes deductions for any rebates and discounts or...

  4. LLW Notes: Volume 10, Number 3

    SciTech Connect (OSTI)

    1995-04-01

    The Low-Level Radioactive Waste Forum is an association of state and compact representatives, appointed by governors and compact commissions, established to facilitate state and compact implementation of the Low-Level Radioactive Waste Policy Act of 1980 and the Low-Level Radioactive Waste Policy Amendments Act of 1985 and to promote the objectives of low-level radioactive waste regional compacts. The LLW Forum provides an opportunity for state and compact officials to share information with one another and to exchange views with officials of federal agencies and other interested parties.

  5. LLW Notes, Volume 12, Number 7

    SciTech Connect (OSTI)

    Norris, C.; Brown, H.; Gedden, R.; Lovinger, T.; Scheele, L.; Shaker, M.A.

    1997-09-01

    Contents include articles entitled: House votes 309 to 107 to approve Texas compact; Nebraska governor hosts LLRW meeting; Southeast Compact considers funding proposal; Chem-Nuclear explores options re SC revenue requirements; Legislation sets revenue requirements for Barnwell; TCC meets: Supports CA request for technical assistance; DOE approves part of California`s technical assistance request; State legislators discuss LLRW management for OH, IL, NC; Washington governor re Potential New Hanford Role; Federal court enjoins DOE from excluding WCS on new disposal; Appellate court in favor of DOE in surcharge rebates dispute; Hearing set for October in Ward Valley case; court rejects federal motion to dismiss Ward Valley suit; NE sues commission re veto over export authorizations; US Supreme Court dismisses line-item veto challenge; Department of Interior Inspector General investigation requested; USEC privatization plan approved; DOD finalizes LLRW disposal charter; Clinton nominates six DOE appointees; Congress moves FUSRAP to Army Corps of Engineers; Schaefer named interim director of USGS: Nichols leaves EPA: NRC Commissioner Rogers` term expires; NRC: CA ``Well-Quantified`` to license Ward Valley facility; EPA objects to state permit for Louisiana facility; Petitions submitted to EPA oppose Shintech permits; ECOS draft recommendations re Enviro programs; Legislation introduced to prohibit spent fuel shipments to the Goshutes; and HLW legislation ready for floor action.

  6. Property:Notes | Open Energy Information

    Open Energy Info (EERE)

    We were unable to clearly ascertain the background temperature but the spatial distribution of the data did not point to a broader zone of thermal highs. At both of these tufa...

  7. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Heat Content of Natural Gas Consumed Definitions Key Terms Definition British Thermal Unit (Btu) The quantity of heat required to raise the temperature of 1 pound of liquid water by 1 degree Fahrenheit at the temperature at which water has its greatest density (approximately 39 degrees Fahrenheit). Delivered to Consumers (Heat Content) Heat content of residential, commercial, industrial, vehicle fuel and electric power deliveries to consumers. Electric Power (Heat Content) Heat content of

  8. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Number of Consumers Definitions Key Terms Definition Commercial Consumption Gas used by nonmanufacturing establishments or agencies primarily engaged in the sale of goods or services. Included are such establishments as hotels, restaurants, wholesale and retail stores and other service enterprises; gas used by local, State, and Federal agencies engaged in nonmanufacturing activities. Industrial Consumption Natural gas used for heat, power, or chemical feedstock by manufacturing establishments or

  9. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Associated-Dissolved Proved Reserves, Wet Definitions Key Terms Definition Acquisitions The volume of proved reserves gained by the purchase of an existing fields or properties, from the date of purchase or transfer. Adjustments The quantity which preserves an exact annual reserves balance within each State or State subdivision of the following form: Adjustments + Revision Increases - Revision Decreases - Sales + Acquisitions + Extensions + New Field Discoveries + New Reservoir Discoveries in

  10. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Crude Oil plus Lease Condensate Definitions Key Terms Definition Acquisitions The volume of proved reserves gained by the purchase of an existing fields or properties, from the date of purchase or transfer. Adjustments The quantity which preserves an exact annual reserves balance within each State or State subdivision of the following form: Adjustments + Revision Increases - Revision Decreases - Sales + Acquisitions + Extensions + New Field Discoveries + New Reservoir Discoveries in Old Fields -

  11. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Federal Offshore Gulf of Mexico Deepwater Reserves Definitions Key Terms Definition Crude Oil A mixture of hydrocarbons that exists in liquid phase in natural underground reservoirs and remains liquid at atmospheric pressure after passing through surface separating facilities. Depending upon the characteristics of the crude stream, it may also include: Small amounts of hydrocarbons that exist in gaseous phase in natural underground reservoirs but are liquid at atmospheric pressure after being

  12. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Dry Natural Gas Proved Reserves Definitions Key Terms Definition Acquisitions The volume of proved reserves gained by the purchase of an existing fields or properties, from the date of purchase or transfer. Adjustments The quantity which preserves an exact annual reserves balance within each State or State subdivision of the following form: Adjustments + Revision Increases - Revision Decreases - Sales + Acquisitions + Extensions + New Field Discoveries + New Reservoir Discoveries in Old Fields -

  13. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Nonassociated Proved Reserves, Wet Definitions Key Terms Definition Acquisitions The volume of proved reserves gained by the purchase of an existing fields or properties, from the date of purchase or transfer. Adjustments The quantity which preserves an exact annual reserves balance within each State or State subdivision of the following form: Adjustments + Revision Increases - Revision Decreases - Sales + Acquisitions + Extensions + New Field Discoveries + New Reservoir Discoveries in Old

  14. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Maximum U.S. Active Seismic Crew Counts Definitions Key Terms Definition Dimensions In two-dimensional (2D) reflection seismic surveying both the sound source and the sound detectors (numbering up to a hundred or more per shot) are moved along a straight line. The resultant product can be thought of as a vertical sonic cross-section of the subsurface beneath the survey line. It is constructed by summing many compressional (pressure) wave reflections from the various sound source and sound

  15. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Shale Gas Proved Reserves Definitions Key Terms Definition Acquisitions The volume of proved reserves gained by the purchase of an existing fields or properties, from the date of purchase or transfer. Adjustments The quantity which preserves an exact annual reserves balance within each State or State subdivision of the following form: Adjustments + Revision Increases - Revision Decreases - Sales + Acquisitions + Extensions + New Field Discoveries + New Reservoir Discoveries in Old Fields -

  16. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Average Depth of Crude Oil and Natural Gas Wells Definitions Key Terms Definition Crude Oil A mixture of hydrocarbons that exists in liquid phase in natural underground reservoirs and remains liquid at atmospheric pressure after passing through surface separating facilities. Depending upon the characteristics of the crude stream, it may also include: Small amounts of hydrocarbons that exist in gaseous phase in natural underground reservoirs but are liquid at atmospheric pressure after being

  17. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Footage Drilled for Crude Oil and Natural Gas Wells Definitions Key Terms Definition Crude Oil A mixture of hydrocarbons that exists in liquid phase in natural underground reservoirs and remains liquid at atmospheric pressure after passing through surface separating facilities. Depending upon the characteristics of the crude stream, it may also include: Small amounts of hydrocarbons that exist in gaseous phase in natural underground reservoirs but are liquid at atmospheric pressure after being

  18. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Country Definitions Key Terms Definition Exports Natural Gas deliveries out of the Continental United States and Alaska to foreign countries. Liquefied Natural Gas (LNG) Natural gas (primarily methane) that has been liquefied by reducing its temperature to -260 degrees Fahrenheit at atmospheric pressure. Pipeline A continuous pipe conduit, complete with such equipment as valves, compressor stations, communications systems, and meters, for transporting natural and/or supplemental gas from one

  19. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    Country Definitions Key Terms Definition Imports Natural Gas received in the Continental United States (including Alaska) from a foreign country. Liquefied Natural Gas (LNG) Natural gas (primarily methane) that has been liquefied by reducing its temperature to -260 degrees Fahrenheit at atmospheric pressure. Pipeline A continuous pipe conduit, complete with such equipment as valves, compressor stations, communications systems, and meters, for transporting natural and/or supplemental gas from one

  20. Table Definitions, Sources, and Explanatory Notes

    Gasoline and Diesel Fuel Update (EIA)

    International & Interstate Movements by State Definitions Key Terms Definition Deliveries The physical transfer of natural, synthetic, and/or supplemental gas from facilities operated by the responding company to facilities operated by others or to consumers. Exports Natural Gas deliveries out of the Continental United States and Alaska to foreign countries. Imports Natural Gas received in the Continental United States (including Alaska) from a foreign country. Natural Gas A gaseous mixture