Powered by Deep Web Technologies
Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

OPTI 626-Integrated Optics and Optoelectronics Course Description  

E-Print Network (OSTI)

OPTI 626- Integrated Optics and Optoelectronics Course Description: This course aims to give a broad understanding of the physics and technology of discrete and integrated optical and optoelectronic componenents. The main focus is on important optoelectronic components such as waveguides, lasers, detectors

Arizona, University of

2

Technical Qualification Program Description - Integrated Support Center, Chicago Office  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DEPART ENT of Office of DEPART ENT of Office of ENERGY I Science Integrated Support Center Chicago Office Technical Qualification Program Description ~~~~~~'?£H(.k:1/Zi.':"r'fl. ; ;!. / ; h tJ/ tl oxa nn e E. Purucker, M anager ~ Office of Science - Chicago Office Technical Qualification Program Description Revision 2, November 2010 CONCURRENCE The Office of Science-Chicago Office (SC-CH) is the sponsor for this Technical Qualification Program (TQP) Description. This is applicable to SC-CH, New Brunswick Laboratory (NBLL Ames Site Office (AMSO) and Argonne Site Office (ASO). These offices are in joint participation and endorsement of the SC-CH Technical Qualification Program process and have also provided concurrence below. The SC-CH Manager is the approval authority for this program description.

3

Treatment of Pionic Modes at the Nuclear Surface for Transport Descriptions  

E-Print Network (OSTI)

Dispersion relations and amplitudes of collective pionic modes are derived in a pi + nucleon-hole + delta-hole model for use in transport descriptions by means of a local density approximation. It is discussed how pionic modes can be converted to real particles when penetrating the nuclear surface and how earlier treatments can be improved. When the surface is stationary only free pions emerge. The time-dependent situation is also addressed, as is the conversion of non-physical (i.e. unperturbed delta-hole) modes to real particles when the nuclear density vanishes. A simplified one-dimensional scenario is used to investigate the reflection and transmission of pionic modes at the nuclear surface. It is found that reflection of pionic modes is rather unlikely, but the process can be incorporated into transport descriptions by the use of approximate local transmission coefficients.

J. Helgesson; J. Randrup

1995-08-22T23:59:59.000Z

4

Integration of Failure Modes and Effects Analysis (FMEA) in the Engineering Design Process.  

E-Print Network (OSTI)

??ABSTRACT Integration of Failure Modes and Effects Analysis (FMEA) in the Engineering Design Process Hua-wei Wen Failure modes and effects analysis (FMEA) is one of… (more)

Wen, Hua-wei

2013-01-01T23:59:59.000Z

5

Current mode integrators and their applications in low-voltage high frequency CMOS signal processing  

E-Print Network (OSTI)

Low voltage CMOS fully differential integrators for high frequency continuous-time filters using current-mode techniques are presented.. Current mode techniques are employed to avoid the use of the floating differential pair, in order to achieve...

Smith, Sterling Lane

2012-06-07T23:59:59.000Z

6

Silicon-germanium saturable absorbers and erbium-doped waveguides for integrated mode-locked lasers  

E-Print Network (OSTI)

In this thesis, Silicon-Germanium (SiGe) Saturable Bragg Reflectors (SBR) and Erbium-doped waveguide chips are fabricated and characterized as crucial components for integration of a mode-locked laser on a Si-chip. The ...

Byun, Hyunil

2006-01-01T23:59:59.000Z

7

Integrated system modeling analysis of a cryogenic multi-cell deflecting-mode cavity resonator  

SciTech Connect

A deflecting mode cavity is the integral element for six-dimensional phase-space beam control in bunch compressors and emittance transformers at high energy beam test facilities. RF performance of a high-Q device is, however, highly sensitive to operational conditions, in particular in a cryo-cooling environment. Using analytic calculations and RF simulations, we examined cavity parameters and deflecting characteristics of TM{sub 110,?} mode of a 5 cell resonator in a liquid nitrogen cryostat, which has long been used at the Fermilab A0 Photoinjector (A0PI). The sensitivity analysis indicated that the cavity could lose 30%–40% of deflecting force due to defective input power coupling accompanying non-uniform field distribution across the cells with 40 ? 50 MeV electron beam and 70–80 kW klystron power. Vacuum-cryomodules of the 5 cell cavity are planned to be installed at the Fermilab Advanced Superconducting Test Accelerator facility. Comprehensive modeling analysis integrated with multi-physics simulation tools showed that RF loading of 1 ms can cause a ?5 K maximum temperature increase, corresponding to a ?4.3 ?m/ms deformation and a 1.32 MHz/K maximum frequency shift. The integrated system modeling analysis will improve design process of a high-Q cavity with more accurate prediction of cryogenic RF performance under a high power pulse operation.

Shin, Young-Min [Department of Physics, Northern Illinois University, Dekalb, Illinois 60115 (United States) [Department of Physics, Northern Illinois University, Dekalb, Illinois 60115 (United States); Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States); Church, Michael [Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)] [Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States)

2013-09-15T23:59:59.000Z

8

On the Mapping and Wavenumber Resolution of Line-Integral Data for Observations of Low-Mode Internal Tides  

E-Print Network (OSTI)

-Mode Internal Tides BRIAN D. DUSHAW Applied Physics Laboratory, College of Ocean and Fishery Sciences-integral tomography data to esti- mate the spectra, maps, and energy of low-mode internal-tide radiation; the exten results are, of course, obtained when both types of data are used. As a practical example of the formalism

Dushaw, Brian

9

An Approach to Enterprise Application Integration Based on Ontology Semantic Description  

Science Journals Connector (OSTI)

This paper systematically provides an enterprise application integration (EAI) approach for the complex product design industry in which the application integration has long been difficult. In addition, the co...

Lu Liu; Deyu Kong; Yi Li; Zhe Liu

2008-01-01T23:59:59.000Z

10

MIT Integrated Global System Model (IGSM) Version 2: Model Description and Baseline Evaluation  

E-Print Network (OSTI)

The MIT Integrated Global System Model (IGSM) is designed for analyzing the global environmental changes that may result from anthropogenic causes, quantifying the uncertainties associated with the projected changes, and ...

Sokolov, Andrei P.

11

System Description for the KW Basin Integrated Water Treatment System (IWTS) (70.3)  

SciTech Connect

This is a description of the system that collects and processes the sludge and radioactive ions released by the spent nuclear fuel (SNF) processing operations conducted in the 105 KW Basin. The system screens, settles, filters, and conditions the basin water for reuse. Sludge and most radioactive ions are removed before the water is distributed back to the basin pool. This system is part of the Spent Nuclear Fuel Project (SNFP).

DERUSSEAU, R.R.

2000-04-18T23:59:59.000Z

12

An integrated approach for prospectively investigating a mode-of-action for rodent liver effects  

SciTech Connect

Registration of new plant protection products (e.g., herbicide, insecticide, or fungicide) requires comprehensive mammalian toxicity evaluation including carcinogenicity studies in two species. The outcome of the carcinogenicity testing has a significant bearing on the overall human health risk assessment of the substance and, consequently, approved uses for different crops across geographies. In order to understand the relevance of a specific tumor finding to human health, a systematic, transparent, and hypothesis-driven mode of action (MoA) investigation is, appropriately, an expectation by the regulatory agencies. Here, we describe a novel approach of prospectively generating the MoA data by implementing additional end points to the standard guideline toxicity studies with sulfoxaflor, a molecule in development. This proactive MoA approach results in a more robust integration of molecular with apical end points while minimizing animal use. Sulfoxaflor, a molecule targeting sap-feeding insects, induced liver effects (increased liver weight due to hepatocellular hypertrophy) in an initial palatability probe study for selecting doses for subsequent repeat-dose dietary studies. This finding triggered the inclusion of dose-response investigations of the potential key events for rodent liver carcinogenesis, concurrent with the hazard assessment studies. As predicted, sulfoxaflor induced liver tumors in rats and mice in the bioassays. The MoA data available by the time of the carcinogenicity finding supported the conclusion that the carcinogenic potential of sulfoxaflor was due to CAR/PXR nuclear receptor activation with subsequent hepatocellular proliferation. This MoA was not considered to be relevant to humans as sulfoxaflor is unlikely to induce hepatocellular proliferation in humans and therefore would not be a human liver carcinogen. - Highlights: • We prospectively generated MoA data into standard guideline toxicity studies. • A proactive MoA approach integrates all end points while minimizing animal use. • MoA data predicted the rodent carcinogenicity of sulfoxaflor via CAR/PXR. • Liver MoA was considered not relevant to humans and hence not a human carcinogen.

LeBaron, Matthew J., E-mail: MJLeBaron@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Geter, David R., E-mail: dave.geter@gmail.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Rasoulpour, Reza J. [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Gollapudi, B. Bhaskar, E-mail: BBGollapudi@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Thomas, Johnson, E-mail: JThomas4@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Murray, Jennifer, E-mail: AMurray@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Kan, H. Lynn, E-mail: HLKan@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Wood, Amanda J., E-mail: AJWood@dow.com [Toxicology and Environmental Research and Consulting, The Dow Chemical Company, Midland, MI, 48674 (United States); Elcombe, Cliff, E-mail: CliffElcombe@cxrbiosciences.com [CXR Biosciences, 2 James Lindsay Place, Dundee Technopole, Dundee, DD1 5JJ, Scotland (United Kingdom); Vardy, Audrey, E-mail: audrey_vardy@europe.bd.com [CXR Biosciences, 2 James Lindsay Place, Dundee Technopole, Dundee, DD1 5JJ, Scotland (United Kingdom); McEwan, Jillian, E-mail: jillian.mcewan@rtmcewan.co.uk [CXR Biosciences, 2 James Lindsay Place, Dundee Technopole, Dundee, DD1 5JJ, Scotland (United Kingdom); Terry, Claire, E-mail: CTerry@dow.com [Dow AgroSciences, Abingdon, Oxfordshire (United Kingdom); Billington, Richard, E-mail: RBillington@dow.com [Dow AgroSciences, Abingdon, Oxfordshire (United Kingdom)

2013-07-15T23:59:59.000Z

13

ECE 483 Guided Wave Optics Catalog Description: OOppttiiccaall wwaavveegguuiiddeess,, ooppttiiccaall ffiibbeerr mmooddee ssttrruuccttuurree aanndd ppoollaarriizzaattiioonn eeffffeeccttss,,  

E-Print Network (OSTI)

ECE 483 ­ Guided Wave Optics Catalog Description: OOppttiiccaall wwaavveegguuiiddeess Instructors: A. Wang Course Content: Overview and safety issues of lasers and optical fibers: eyes, shocks of basic optics, laser mode properties, dispersion, data rates Planar dielectric waveguides and integrated

14

On measuring low-degree p-mode frequency splitting with full-disc integrated data  

Science Journals Connector (OSTI)

......increase of 100 nHz in the solar rotational frequency...splittings of low-degree solar modes. Measurements...stable as a resonance cell. These improvements...combination of better technology and better measurement...systematic errors in the solar case, they cannot presently......

T. Appourchaux; H.-Y. Chang; D. O. Gough; T. Sekii

2000-12-01T23:59:59.000Z

15

Integrated source of tunable nonmaximally mode-entangled photons in a domain-engineered lithium niobate waveguide  

SciTech Connect

The nonmaximally entangled state is a special kind of entangled state, which has important applications in quantum information processing. It has been generated in quantum circuits based on bulk optical elements. However, corresponding schemes in integrated quantum circuits have been rarely considered. In this Letter, we propose an effective solution for this problem. An electro-optically tunable nonmaximally mode-entangled photon state is generated in an on-chip domain-engineered lithium niobate (LN) waveguide. Spontaneous parametric down-conversion and electro-optic interaction are effectively combined through suitable domain design to transform the entangled state into our desired formation. Moreover, this is a flexible approach to entanglement architectures. Other kinds of reconfigurable entanglements are also achievable through this method. LN provides a very promising platform for future quantum circuit integration.

Ming, Yang; Wu, Zi-jian; Xu, Fei, E-mail: feixu@nju.edu.cn; Lu, Yan-qing, E-mail: yqlu@nju.edu.cn [National Laboratory of Solid State Microstructures and College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China); Cui, Guo-xin [National Laboratory of Solid State Microstructures and College of Engineering and Applied Sciences, Nanjing University, Nanjing 210093 (China); Key Laboratory of Nanodevices and Nanoapplications, Suzhou Institute of Nano-Tech and Nano-Bionics, CAS, Suzhou 215000 (China); Tan, Ai-hong [Laboratory for Quantum Information, China Jiliang University, Hangzhou 310018 (China)

2014-04-28T23:59:59.000Z

16

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National Laboratory. * teaches modern geophysical exploration techniques: seismic reflection and refraction, gravity and magnetics, electromagnetics (including magnetotellurics), and electrical resistivity * involves extensive hands-on field experience * integrates geophysical methods to solve real

17

Compton telescope with coded aperture mask: Imaging with the INTEGRAL/IBIS Compton mode  

E-Print Network (OSTI)

Compton telescopes provide a good sensitivity over a wide field of view in the difficult energy range running from a few hundred keV to several MeV. Their angular resolution is, however, poor and strongly energy dependent. We present a novel experimental design associating a coded mask and a Compton detection unit to overcome these pitfalls. It maintains the Compton performance while improving the angular resolution by at least an order of magnitude in the field of view subtended by the mask. This improvement is obtained only at the expense of the efficiency that is reduced by a factor of two. In addition, the background corrections benefit from the coded mask technique, i.e. a simultaneous measurement of the source and background. This design is implemented and tested using the IBIS telescope on board the INTEGRAL satellite to construct images with a 12' resolution over a 29 degrees x 29 degrees field of view in the energy range from 200 keV to a few MeV. The details of the analysis method and the resulting telescope performance, particularly in terms of sensitivity, are presented.

M. Forot; P. Laurent; F. Lebrun; O. Limousin

2007-08-28T23:59:59.000Z

18

High-Performance Integrated Dual-Gate AlGaN/GaN Enhancement-Mode Transistor  

E-Print Network (OSTI)

In this letter, we present a new AlGaN/GaN enhancement-mode (E-mode) transistor based on a dual-gate structure. The dual gate allows the transistor to combine an E-mode behavior with low on-resistance and very high breakdown ...

Lu, Bin

19

Heat transfer and hydraulic resistance of supercritical pressure coolants. Part III: Generalized description of SCP fluids normal heat transfer, empirical calculating correlations, integral method of theoretical calculations  

Science Journals Connector (OSTI)

Abstract The problems of generalized description of the supercritical-pressure fluids “normal” heat transfer are analyzed. The known empirical correlations are considered and their efficiency is assessed in view of using the refined International Standards on water and carbon dioxide thermophysical properties. The efficient methods of renovating the old correlations, as well as new correlations for calculating normal heat transfer are proposed. The modified integral method for theoretical calculating normal heat transfer is given, which makes it possible obtaining the data on the SCP flow structure.

V.A. Kurganov; Yu.A. Zeigarnik; I.V. Maslakova

2013-01-01T23:59:59.000Z

20

Structured Descriptions  

E-Print Network (OSTI)

A descriptive formalism along with a philosophy for its use and expansion are presented wherein descriptions are of a highly structured nature. This descriptive system and the method of recognition are extended to the ...

Gabriel, Richard P.

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Integrable S-matrices, massive and massless modes and the AdS_2 x S^2 superstring  

E-Print Network (OSTI)

We derive the exact S-matrix for the scattering of particular representations of the centrally-extended psu(1|1)^2 Lie superalgebra, conjectured to be related to the massive modes of the light-cone gauge string theory on AdS_2 x S^2 x T^6. The S-matrix consists of two copies of a centrally-extended psu(1|1) invariant S-matrix and is in agreement with the tree-level result following from perturbation theory. Although the overall factor is left unfixed, the constraints following from crossing symmetry and unitarity are given. The scattering involves long representations of the symmetry algebra, and the relevant representation theory is studied in detail. We also discuss Yangian symmetry and find it has a standard form for a particular limit of the aforementioned representations. This has a natural interpretation as the massless limit, and we investigate the corresponding limits of the massive S-matrix. Under the assumption that the massless modes of the light-cone gauge string theory transform in these limiting representations, the resulting S-matrices would provide the building blocks for the full S-matrix. Finally, some brief comments are given on the Bethe ansatz.

Ben Hoare; Antonio Pittelli; Alessandro Torrielli

2014-11-14T23:59:59.000Z

22

Ultrafast and widely tuneable vertical-external-cavity surface-emitting laser, mode-locked by a graphene-integrated distributed Bragg reflector  

E-Print Network (OSTI)

We report a versatile and cost-effective way of controlling the unsaturated loss, modulation depth and saturation fluence of graphene-based saturable absorbers (GSAs), by changing the thickness of a spacer between SLG and a high-reflection mirror. This allows us to modulate the electric field intensity enhancement at the GSA from 0 up to 400%, due to the interference of incident and reflected light at the mirror. The unsaturated loss of the SLG-mirror-assembly can be reduced to$\\sim$0. We use this to mode-lock a VECSEL from 935 to 981nm. This approach can be applied to integrate SLG into various optical components, such as output coupler mirrors, dispersive mirrors, dielectric coatings on gain materials. Conversely, it can also be used to increase absorption (up to 10%) in various graphene based photonics and optoelectronics devices, such as photodetectors.

Zaugg, C A; Wittwer, V J; Popa, D; Milana, S; Kulmala, T; Sundaram, R S; Mangold, M; Sieber, O D; Golling, M; Lee, Y; Ahn, J H; Ferrari, A C; Keller, U

2013-01-01T23:59:59.000Z

23

Descriptive Astronomy  

Science Journals Connector (OSTI)

... THIS is a text-book based on a new approach to the study of astronomy. Many elementary texts have considered primarily the historical and purely factual descriptive aspects of ... . Many elementary texts have considered primarily the historical and purely factual descriptive aspects of astronomy. Recently, there has been felt a growing need for a course emphasizing the physical ...

R. H. GARSTANG

1960-01-16T23:59:59.000Z

24

University Location Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Location Project Description Location Project Description Boise State University Boise, Idaho Boise State University has undertaken a study of the structural setting and geothermal potential at Neal Hot Springs that will integrate geology, geochemistry, and geophysics to analyze the site on the western Snake River plain. Boise State will determine if Neal Hot Springs sustains the necessary rock dilation and conduit pathways for hydrothermal fluid flow and successful geothermal development. The result will be new data acquisition, including a deep geophysical survey and fault surface data. Colorado School of Mines Golden, Colorado Colorado School of Mines will conduct an investigation near Homedale, Idaho, an area that straddles volcanic rock and unconsolidated sediments.

25

Mode Order Converter Using Tapered Multi-mode Interference Couplers  

E-Print Network (OSTI)

, and modes of guided light is essential for flexibility in photonic integrated circuit (PIC) design.3120) Integrated optics devices; (130.2790) Guided waves 1. Introduction Accommodating various sizes, shapes indices. One can define Am0 as the transmission of the fundamental mode in the output guide when exciting

Texas at Austin, University of

26

Two-stage coal liquefaction process materials from the Wilsonville Facility operated in the nonintegrated and integrated modes: chemical analyses and biological testing  

SciTech Connect

This document reports the results from chemical analyses and biological testing of process materials sampled during operation of the Wilsonville Advanced Coal Liquefaction Research and Development Facility (Wilsonville, Alabama) in both the noncoupled or nonintegrated (NTSL Run 241) and coupled or integrated (ITSL Run 242) two-stage liquefaction operating modes. Mutagenicity and carcinogenicity assays were conducted in conjunction with chromatographic and mass spectrometric analyses to provide detailed, comparative chemical and biological assessments of several NTSL and ITSL process materials. In general, the NTSL process materials were biologically more active and chemically more refractory than analogous ITSL process materials. To provide perspective, the NTSL and ITSL results are compared with those from similar testing and analyses of other direct coal liquefaction materials from the solvent refined coal (SRC) I, SRC II and EDS processes. Comparisons are also made between two-stage coal liquefaction materials from the Wilsonville pilot plant and the C.E. Lummus PDU-ITSL Facility in an effort to assess scale-up effects in these two similar processes. 36 references, 26 figures, 37 tables.

Later, D.W.

1985-01-01T23:59:59.000Z

27

Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Description Program Description Discover E (Engineering) is an evening of interesting, interactive and fun engineering, science, math, and technology demonstrations for K-12 students and their parents or guardians. It is held in conjunction with National Engineers Week which is celebrated at the time of George Washington's birthday, our nation's first President, who was a military engineer and land surveyor. Activities include 30-50 interactive demonstrations of basic engineering, science, technology and math principles that may include robots, reverse engineering, casting, crystal structures, forensic science, the effects of liquid nitrogen, slide rule, sound waves, electrostatics, mechanics, materials properties and materials

28

mode | OpenEI  

Open Energy Info (EERE)

mode mode Dataset Summary Description Supplemental Table 46 of EIA AEO 2011 Early Release Source EIA Date Released December 08th, 2010 (4 years ago) Date Updated Unknown Keywords AEO Annual Energy Outlook EIA Energy Information Administration Fuel mode TEF transportation Transportation Energy Futures Data text/csv icon Transportation_Sector_Energy_Use_by_Fuel_Type_Within_a_Mode.csv (csv, 144.3 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Annually Time Period 2008-2035 License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset Usefulness of the metadata Average vote Your vote Usefulness of the dataset Average vote Your vote Ease of access Average vote Your vote Overall rating Average vote Your vote

29

Project Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Description Project Description The Energy Policy Act of 2005 (EPAct 2005), the Energy Independence and Security Act of 2007 (EISA 2007), and Presidential Executive Order 13423 all contain requirements for Federal facilities to decrease energy consumption and increase the use of renewable energy by the year 2015. To provide leadership in meeting these requirements, DOE, in partnership with the General Services Administration (GSA), has installed a rooftop solar electric, or PV, system on the roof of DOE's headquarters in Washington, D.C. The 205 kilowatt (kW) installation is one of the largest of its kind in the Nation's capital. A display in the For- restal building will show the power output of the PV system during the day and the energy produced over

30

Problem Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Description Description Model Domain 2-D Radial Grid System : 1000 m x 60 m 25 m 25 m 10 m Hydrate Zone 1000 m Shale Shale Discretization Model 1 (200 x 30) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 30 cells (5 x 5 m, 20 x 0.5 m, 5 x 5 m) Model 2 (200 x 11) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 11 cells (5 x 5 m, 1 x 10.0 m, 5 x 5 m) Model 3 (50 x 30) r direction : 50 cells logarithmically distributed from r w = 0.10795 m to r 50 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls")

31

EMS Description | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EMS Description EMS Description Environmental Management System Description (August 2014) Environmental Management System Description (August 2014) More Documents & Publications...

32

Research Project Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Project Description No job description found Current Research Opportunities Viral Hepatitis Prevention Fellowship Climate Change Communication Internship Applied Molecular...

33

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: University Recreation Office Manager Date: 8/2/12 Purpose of the Position The University Recreation Office Manager is an integral part of the University Recreation department and will work with the Assistant Director of University Recreation

Carter, John

34

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: University Recreation Office Manager Date: 7/23/2013 Purpose of the Position The University Recreation Office Manager is an integral part of the University Recreation department and will work with the Assistant Director of University Recreation

Carter, John

35

iTOUGH2-IFC: An Integrated Flow Code in Support of Nagra's Probabilistic Safety Assessment:--User's Guide and Model Description  

SciTech Connect

This document describes the development and use of the Integrated Flow Code (IFC), a numerical code and related model to be used for the simulation of time-dependent, two-phase flow in the near field and geosphere of a gas-generating nuclear waste repository system located in an initially fully water-saturated claystone (Opalinus Clay) in Switzerland. The development of the code and model was supported by the Swiss National Cooperative for the Disposal of Radioactive Waste (Nagra), Wettingen, Switzerland. Gas generation (mainly H{sub 2}, but also CH{sub 4} and CO{sub 2}) may affect repository performance by (1) compromising the engineered barriers through excessive pressure build-up, (2) displacing potentially contaminated pore water, (3) releasing radioactive gases (e.g., those containing {sup 14}C and {sup 3}H), (4) changing hydrogeologic properties of the engineered barrier system and the host rock, and (5) altering the groundwater flow field and thus radionuclide migration paths. The IFC aims at providing water and gas flow fields as the basis for the subsequent radionuclide transport simulations, which are performed by the radionuclide transport code (RTC). The IFC, RTC and a waste-dissolution and near-field transport model (STMAN) are part of the Integrated Radionuclide Release Code (IRRC), which integrates all safety-relevant features, events, and processes (FEPs). The IRRC is embedded into a Probabilistic Safety Assessment (PSA) computational tool that (1) evaluates alternative conceptual models, scenarios, and disruptive events, and (2) performs Monte-Carlo sampling to account for parametric uncertainties. The preliminary probabilistic safety assessment concept and the role of the IFC are visualized in Figure 1. The IFC was developed based on Nagra's PSA concept. Specifically, as many phenomena as possible are to be directly simulated using a (simplified) process model, which is at the core of the IRRC model. Uncertainty evaluation (scenario uncertainty, conceptualization uncertainty, parametric uncertainty) is handled by the outer shell of the PSA model; it is not further discussed in this report. Moreover, justifications for the inclusion or exclusion of FEPs as well as for certain simplifying assumptions are available or can be obtained using detailed process models and other supporting information. The IFC is both a numerical code and a model of a repository system. The numerical code is a modification of the multiphase, multicomponent simulator TOUGH2 (Pruess et al., 1999), as implemented within the iTOUGH2 (Finsterle, 2007abc) framework. The code modifications are mainly concerned with the implementation of relevant FEPs as outlined in Nagra (2007a, AN 07-115), as well as removal of processes and features that are not needed within the IFC; the modifications are summarized in Appendix A1. In addition, the IFC includes a model, i.e., a simplified representation of the repository system. Specifically, a computational grid was generated, which includes the emplacement tunnels for spent fuel, high-level wastes, as well as long-lived intermediate-level wastes. Moreover, the model represents engineered barriers (backfill, seals, plugs, etc.), various tunnels and other underground facilities, and includes a simplified representation of the geological structure, i.e., the host rock (including the excavation disturbed zone (EDZ) around the underground openings), confining units, local aquifers, and a highly transmissive zone. The IFC model was designed in close collaboration with Nagra. This report describes all functional requirements of the IFC and how they are implemented in the IFC. The input formats needed to invoke added modeling capabilities are documented. Finally, the IFC model grid is described, and results from a test simulation are presented.

Finsterle, Stefan A.

2009-01-02T23:59:59.000Z

36

Project Name/Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RCA CM-3 Risk Management RCA CM-3 Risk Management Projects/Programs - RMPs, Tools, and SMEs Project Name/Description (see note below) DOE Program DOE RMP Contractor RMP Combined RMP Tools Database/Risk Analysis SMEs Federal/M&O/Consultant Integrated Biorefinery Research Facility Project EE X Research Support Facility Project EE X National Synchrotron Light Source II Project SC X 12 GeV Upgrade Project (TJL) SC X Physical Sciences Facility Project (PNNL) SC X P6, Pertmaster, Excel Mike Shay, Jason Gatelum ITER SC X (internation al pgm) P6, Pertmaster, Risk Checklist, Risk Assessor Handbook John Tapia, Colin Williams, Allen Bishop SING & SING II (SNS, OR) SC X Excel, Analytic Hierarchy, P6 Barbara Thibadeau Modernization of Lab Fac. (ORNL)

37

Theory of Bernstein modes in graphene  

Science Journals Connector (OSTI)

We present a theoretical description of Bernstein modes that arise as a result of the coupling between plasmonlike collective excitations (upper-hybrid mode) and inter-Landau-level excitations, in graphene in a perpendicular magnetic field. These modes, which are apparent as avoided level crossings in the spectral function obtained in the random-phase approximation, are described to great accuracy in a phenomenological model. Bernstein modes, which may be measured in inelastic light-scattering experiments or in photoconductivity spectroscopy, are a manifestation of the Coulomb interaction between the electrons and may be used for a high-precision measurement of the upper-hybrid mode at small nonzero wave vectors.

R. Roldán; M. O. Goerbig; J.-N. Fuchs

2011-05-17T23:59:59.000Z

38

New proofs for old modes Mark Wooding  

E-Print Network (OSTI)

the standard block cipher modes of operation: CBC, CFB, and OFB and analyse their security. We don't look in (full­width) CFB and OFB modes and that generalized counters encrypted using the block cipher (with Ciphertext feedback (CFB) en­ cryption 19 4.1 Description . . . . . . . . . 19 4.2 Sliding strings

39

New proofs for old modes Mark Wooding  

E-Print Network (OSTI)

the standard block cipher modes of operation: CBC, CFB, and OFB and analyse their security. We don't look in (full-width) CFB and OFB modes and that generalized counters encrypted using the block cipher (with Ciphertext feedback (CFB) en- cryption 19 4.1 Description . . . . . . . . . 19 4.2 Sliding strings

40

Integrated Safety Management System (ISMS) program description  

SciTech Connect

This document the ISMS Program for the 300 Area and lists the procedures necessary to implement the program.

BUMP, S.L.

1999-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Western Wind and Solar Integration Study  

SciTech Connect

This report provides a full description of the Western Wind and Solar Integration Study (WWSIS) and its findings.

GE Energy

2010-05-01T23:59:59.000Z

42

GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.  

SciTech Connect

THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

2002-05-31T23:59:59.000Z

43

STEP Intern Job Description  

Energy.gov (U.S. Department of Energy (DOE))

STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

44

Microsoft Word - HQ ISM System Description Final  

National Nuclear Security Administration (NNSA)

NA-1 SD 450.4-1 NA-1 SD 450.4-1 Approved: 10-23-07 National Nuclear Security Administration Headquarters Integrated Safety Management System Description This NNSA Headquarters Integrated Safety Management System Description describes the NNSA Headquarters role in establishing expectations and accomplishing work in a safe and environmentally sound manner to successfully execute the NNSA mission and strategic goals. NNSA senior managers strongly support and are personally committed to implementation of the policy and principles of Integrated Safety Management. Approved: &? .> ,& o & k Thomas P. D7Ago, tino Administrator h Table of Contents EXECUTIVE SUMMARY .............................................................................................................

45

2009 Raj JainCSE571SWashington University in St. Louis Modes ofModes of  

E-Print Network (OSTI)

, CFB, CTR 2. Privacy+Integrity 3. DES Attacks 4. 3DES and its design Ref: Chapter 4 of textbook. #12. Electronic Code Book (ECB) 2. Cipher Block Chaining (CBC) 3. Cipher Feedback Mode (CFB) 4. Output Feedback University in St. Louis 4. k4. k--Bit Cipher Feedback Mode (CFB)Bit Cipher Feedback Mode (CFB) ! Key Stream

Jain, Raj

46

Project Description: page 1 Project Description  

E-Print Network (OSTI)

Project Description: page 1 Project Description I. Introduction: Josephson junction networks Over the past 25 years, superconducting Josephson junctions have gradually become one of the major topics standards. Our research uses Josephson junctions as model systems for problems in nonlinear and neural

Segall, Ken

47

Student Groups Student Group Description Short Description  

E-Print Network (OSTI)

Student Groups Student Group Description Short Description AHR Scholar-Architecture Scholar ART Honors - Architecture Honors H04 Honors - Allied Medical Prof Honors H05 Honors - Arts & Sciences Honors H14 Honors - Envir&Natural Resources Honors H15 Honors - Food, Agr, & Envir Sci Honors H16 Honors

48

Mechanical Engineer Company Description  

E-Print Network (OSTI)

Mechanical Engineer Company Description Control Solutions Inc. is a small, dynamic, and rapidly. Position Description The Mechanical Engineer is responsible for all aspects associated with the mechanical enclosures, brackets, cabling assemblies among others. Systems include mechanisms, sensors, hydraulics, among

Kostic, Milivoje M.

49

Modes of Operation Encryption with Block Ciphers: Modes of Operation  

E-Print Network (OSTI)

(ECB) · Cipher Block Chaining mode (CBC) · Output Feedback mode (OFB) · Cipher Feedback mode (CFB) · Cipher Feedback mode (CFB) · Counter mode (CTR) · Galois Counter Mode (GCM) · All of the 6 modes have one

50

NASA Academy Program Descriptions  

E-Print Network (OSTI)

NASA Academy Program Descriptions October 2010 #12;NASA Academy Program Descriptions 2011 October 11, 2010 1/5 NASA Academy at ARC, GRC, GSFC, and MSFC Websites: Ames: http://academy.arc.nasa.gov Glenn: http://academy.grc.nasa.gov Goddard: http://academy.gsfc.nasa.gov Marshall: http://academy.msfc.nasa

Wang, Z. Jane

51

Marketing Plan Company Description  

E-Print Network (OSTI)

Marketing Plan Company Description: Consumer company that provides a product to helps boost Marketing Swat Team Project Description and Deliverables: The team will Identify the best online vehicles of promotions from YouTube celebs, co- marketing with related businesses, affiliate marketing, cross marketing

Dahl, David B.

52

Forest Landscape Description and  

E-Print Network (OSTI)

Forest Landscape Description and Inventories a basis for landplanning and design Pacific Southwest landscape description and inventories ­ a basis for land plan- ning and design. Berkeley, Calif., Pacific SW. Illustrates their application in two inventories made to aid managers and landscape architects in planning

Standiford, Richard B.

53

Description of recommended non-thermal mixed waste treatment technologies: Version 1.0  

SciTech Connect

This document contains description of the technologies selected for inclusions in the Integrated Nonthermal Treatment Systems (INTS) Study. The purpose of these descriptions is to provide a more complete description of the INTS technologies. It supplements the summary descriptions of candidate nonthermal technologies that were considered for the INTS.

NONE

1995-08-01T23:59:59.000Z

54

2007 Raj JainCSE571SWashington University in St. Louis Modes ofModes of  

E-Print Network (OSTI)

, CFB, CTR 2. Privacy+Integrity 3. DES Attacks 4. 3DES and its design Ref: Chapter 4 of textbook. #12. Electronic Code Book (ECB) 2. Cipher Block Chaining (CBC) 3. Cipher Feedback Mode (CFB) 4. Output Feedback be used #12;6-10 ©2007 Raj JainCSE571SWashington University in St. Louis kk--Bit Cipher Feedback Mode (CFB

Jain, Raj

55

Description urse deals w  

E-Print Network (OSTI)

H Place: O Meeting Tentativ W L o L W L M L Description urse deals w g offshore r seamounts, animal ecology. Plant-animal interactions in the shallow subtidal zone. Lab & Field Work: Community analysis

56

B Plant facility description  

SciTech Connect

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

57

Kink modes in pedestal  

SciTech Connect

Kink modes are investigated in pedestal for shaped tokamaks. An analytic combining criterion is presented. It lies on the middle of the sufficient criterion of Lortz and necessary criterion of Mercier giving a more restricted necessary criterion. Growth rates and mode structure are calculated. For large poloidal mode number, the modes are highly localized in both poloidal and radial directions. The modes increase rapidly when they approach to the resonant surface. They are typical of edge localized modes (ELMs). It is assumed that the modes vanish inside the next resonant surface, then, there seems to be a second stable region. Several mitigation methods for controlling ELMs are proposed.

Wang, Z. T. [Southwestern Institute of Physics, Chengdu 610041 (China) [Southwestern Institute of Physics, Chengdu 610041 (China); College of Physics Science and Technology, Sichuan University, Chengdu 610065 (China); He, Z. X.; Dong, J. Q.; Wang, Z. H.; Xu, M. [Southwestern Institute of Physics, Chengdu 610041 (China)] [Southwestern Institute of Physics, Chengdu 610041 (China); Xu, X. L.; Mou, M. L.; Sun, T. T.; Huang, J.; Chen, S. Y.; Tang, C. J. [College of Physics Science and Technology, Sichuan University, Chengdu 610065 (China)] [College of Physics Science and Technology, Sichuan University, Chengdu 610065 (China)

2014-03-15T23:59:59.000Z

58

On the use of Description Logic for Semantic Interoperability of Enterprise Systems  

E-Print Network (OSTI)

Systems, Semantic Interoperability, Description Logic, Ontology 1 Introduction Today's needs for more-oriented architectures (SOA) [2]. The integration in manufacturing paradigm (CIM concept) which underlies the global

Paris-Sud XI, Université de

59

Detailed Course Module Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Course Module Description Course Module Description Module/Learning Objectives Level of Detail in Module by Audience Consumers Gen Ed/ Community College Trades 1. Energy Issues and Building Solutions High High High Learning Objectives: * Define terms of building science, ecological systems, economics of consumption * Relate building science perspective, ecology, social science * Explain historical energy and environmental issues related to buildings * Compare Site and source energy * Examine the health, safety and comfort issues in buildings * Examine the general context for building solutions (zero energy green home with durability as the goal) * Explain a basic overview of alternative energy (total solar flux) - do we have enough energy * Examine cash flow to homeowners

60

CRAC2 model description  

SciTech Connect

The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions.

Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

1984-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Rijksuniversiteit Groningen Description  

E-Print Network (OSTI)

Rijksuniversiteit Groningen Description Founded in 1614, the University of Groningen enjoys in the north of the Netherlands, Groningen is an ideal, safe student city with a flourishing student life of Groningen is not a campus University and therefore students have to find their own accommodation in town

Bristol, University of

62

Student Ambassador Job description  

E-Print Network (OSTI)

Blue 1 Student Ambassador Job description Department: Student Administration and Registry Location: Varies - as advised by the UK Student Recruitment and Outreach Team Job title: Student Ambassador Responsible to: UK Student Recruitment and Outreach Team Payment and benefits: £6.42 per hour Duration

Anderson, Jim

63

Home Workspace Field Description  

E-Print Network (OSTI)

Proposal Management Reviewer Home Workspace Field Description Last updated: 4/1/2013 1 of 2 http://eresearch.umich.edu Proposal Management Reviewer Home Workspace Your Home Workspace is your launch pad for eResearch Proposal to the project. Who Can See the Reviewer Home Workspace: People with Reviewer or Reviewer Who Can Sign access

Shyy, Wei

64

Integrating Analytical Models with Descriptive System Models: Implementation of the OMG SyML Standard for the Tool-specific Case of MapleSim and MagicDraw  

Science Journals Connector (OSTI)

The Jet Propulsion Laboratory (JPL) is investing heavily in the development of an infrastructure for building system models using the Systems Modeling Language (SysML). An essential component is a transformation apparatus that permits diverse models to be integrated independently of their nature (e.g. declarative, analytical and statistical). This paper presents one useful case: the integration of analytical models expressed using the Modelica language. Modelica is an open standard, declarative, multi-domain modeling language that allows for complex dynamic systems to be modeled. Maplesoft's MapleSim is one software tool that supports the Modelica language. The tool-neutral specification for the transformation between the languages Modelica and SysML is defined in the SysML-Modelica transformation specification (SyML) standard published by the Object Management Group (OMG). As part of the development efforts, said specification has been implemented using the Query-View- Transformation Operational (QVTO) language. During the process, several critical changes to the current SyML standard were proposed. Furthermore, a number of current limitations related to MapleSim were identified. Despite these issues, a proof-of- concept transformation was successfully implemented. In conclusion, the integration of complex simulation models conforming to the Modelica language with SysML-based system models has shown great promise and is a highly useful tool to support the decision making process in design.

Sebastian J.I. Herzig; Nicolas F. Rouquette; Stephen Forrest; J. Steven Jenkins

2013-01-01T23:59:59.000Z

65

NAICS Codes Description:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Codes Codes Description: Filters: Date Signed only show values between '10/01/2006' and '09/30/2007', Contracting Agency ID show only ('8900'), Contracting Office ID show only ('00001') Contracting Agency ID: 8900, Contracting Office ID: 00001 NAICS Code NAICS Description Actions Action Obligation 541519 OTHER COMPUTER RELATED SERVICES 251 $164,546,671 541611 ADMINISTRATIVE MANAGEMENT AND GENERAL MANAGEMENT CONSULTING SERVICES 236 $52,396,806 514210 DATA PROCESSING SERVICES 195 $28,941,727 531210 OFFICES OF REAL ESTATE AGENTS AND BROKERS 190 $6,460,652 541330 ENGINEERING SERVICES 165 $33,006,079 163 $11,515,387 541690 OTHER SCIENTIFIC AND TECHNICAL CONSULTING SERVICES 92 $40,527,088 531390 OTHER ACTIVITIES RELATED TO REAL ESTATE 79 -$659,654 337214 OFFICE FURNITURE (EXCEPT WOOD) MANUFACTURING 78 $1,651,732

66

Proposal Review Panel Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal Review Panel Descriptions Proposal Review Panel Descriptions To ensure competent scientific review, a proposal may be assigned to a different panel (at the discretion of the Review Panel Chair), or the panel may seek additional ad hoc reviews from other experts. High-Pressure This panel reviews scattering and diffraction proposals that focus on materials at high pressure. Techniques such as (but not limited to) diffraction, nuclear resonant scattering, and inelastic x-ray scattering for materials at high pressure are appropriate for this panel to consider. Instrumentation This panel reviews proposals related to the development of beamline instrumentation, sample environments, x-ray optical components, and/or detectors that are relevant to synchrotron radiation research. This panel

67

Integrated Safety Management Policy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INTEGRATED SAFETY INTEGRATED SAFETY MANAGEMENT SYSTEM DESCRIPTION U.S. DEPARTMENT OF ENERGY Office of Environmental Management Headquarters May 2008 Preparation: Braj K. sin& Occupational Safety and Health Manager Office of Safety Management Concurrence: Chuan-Fu wu Director, Offlce of Safety Management Deputy Assistant Secretary for safe& Management andoperations Operations Officer for 1 Environmental Management Approval: Date p/-g Date Environmental Management TABLE OF CONTENTS ACRONYMS................................................................................................................................................................v EXECUTIVE SUMMARY .........................................................................................................................................1

68

Integrable Quantum Computation  

E-Print Network (OSTI)

Integrable quantum computation is defined as quantum computing via the integrable condition, in which two-qubit gates are either nontrivial unitary solutions of the Yang--Baxter equation or the Swap gate (permutation). To make the definition clear, in this article, we explore the physics underlying the quantum circuit model, and then present a unified description on both quantum computing via the Bethe ansatz and quantum computing via the Yang--Baxter equation.

Yong Zhang

2011-11-16T23:59:59.000Z

69

IDC Integrated Master Plan.  

SciTech Connect

This is the IDC Re-Engineering Phase 2 project Integrated Master Plan (IMP). The IMP presents the major accomplishments planned over time to re-engineer the IDC system. The IMP and the associate Integrated Master Schedule (IMS) are used for planning, scheduling, executing, and tracking the project technical work efforts. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Re- engineering Project Team Initial delivery M. Harris

Clifford, David J.; Harris, James M.

2014-12-01T23:59:59.000Z

70

Mode conversation losses in overmolded millimeter wave transmission lines  

E-Print Network (OSTI)

Millimeter wave transmission lines are integral components for many important applications like nuclear fusion and NMR spectroscopy. In low loss corrugated transmission lines propagating the HE,1 mode with a high waveguide ...

Tax, David S. (David Samuel)

2008-01-01T23:59:59.000Z

71

Direct estimation of Patlak parameters from list mode pet data  

Science Journals Connector (OSTI)

We describe a method to directly estimate Patlak parameters from list mode data. Based on the Patlak model, the uptake rate function of each voxel can be written as a linear combination of the blood input function and its integral, with the slope and ... Keywords: FDG PET, PET, incremental gradient, list mode, the Patlak Model

Quanzheng Li; Richard M. Leahy

2009-06-01T23:59:59.000Z

72

ICRF Mode Conversion Studies with Phase Contrast Imaging and Comparisons with Full-Wave Simulations  

SciTech Connect

Waves in the ion cyclotron range of frequencies (ICRF) are widely used to heat toka-mak plasmas. In a multi-ion-species plasma, the FW converts to ion cyclotron waves (ICW) and ion Bernstein waves (IBW) around the ion-ion hybrid resonance (mode conversion). The mode converted wave is of interest as an actuator to optimise plasma performance through flow drive and current drive. Numerical simulations are essential to describe these processes accurately, and it is important that these simulation codes be validated. On Alcator C-Mod, direct measurements of the mode converted waves have been performed using Phase Contrast Imaging (PCI), which measures the line-integrated electron density fluctuations. The results were compared to full-wave simulations AORSA and TORIC. AORSA is coupled to a Fokker-Planck code CQL3D for self-consistent simulation of the wave electric field and the minority distribution function. The simulation results are compared to PCI measurements using synthetic diagnostic. The experiments were performed in D-H and D-{sup 3}He plasmas over a wide range of ion species concentrations. The simulations agreed well with the measurements in the strong absorption regime. However, the measured fluctuation intensity was smaller by 1-2 orders of magnitudes in the weakly abosorbing regime, and a realistic description of the plasma edge including dissipation and antenna geometry may be required in these cases.

Tsujii, N.; Bonoli, P. T.; Lin, Y.; Wright, J. C.; Wukitch, S. J. [MIT Plasma Science and Fusion Center, Cambridge, Massachusetts (United States); Porkolab, M.; Jaeger, E. F. [Oak Ridge National Laboratory, Oadk Ridge, Tennessee (United States); Harvey, R. W. [CompX, Del Mar, California (United States)

2011-12-23T23:59:59.000Z

73

Architecture AddressingModes  

E-Print Network (OSTI)

MIPS R2000 Architecture and Assembly (Part 1) 1. CPU Registers 2. Byte Order 3. AddressingModes 4­endian byte order 3 2 1 0 0 1 2 3 Or Byte number #12; AddressingModes . MIPS is a load/store architecture . RICS -- Load/Store architecture -- All instructions have equal length of 4 bytes -- Every register can

Nguyen, Dat H.

74

Description of Proposed Action  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carlsbad Field Office Carlsbad Field Office RECORD OF CATEGORICAL EXCLUSION DETERMINATION 1 Description of Proposed Action Performance of a three-dimensional seismic survey line on approximately 2,409 acres contained within the WIPP Land Withdrawal Area as part of a larger survey to determine whether hydrocarbons are present in the region in quantities that warrant extraction and development. Number and Title of Applicable Categorical Exclusion B3.1 Site Characterization/Environmental Monitoring Activities covered by this Categorical Exclusion include, but are not limited to, site characterization and environmental monitoring under CERCLA and RCRA. Specific activities include, but are not limited to: (a) Geological, geophysical (such as gravity, magnetic, electrical, seismic, and radar), geochemical, and

75

Stabilization techniques and silicon-germanium saturable absorbers for high repetition rate mode-locked lasers  

E-Print Network (OSTI)

The monolithic integration of passively mode-locked solid-state lasers at highest repetition rates has been prevented by Q-switching instabilities and the lack of integrable saturable absorbers to date. In this thesis we ...

Grawert, Felix Jan

2005-01-01T23:59:59.000Z

76

Review: Handbook of Descriptive Linguistic Fieldwork  

E-Print Network (OSTI)

The contents of the “Handbook of Descriptive LinguisticLinguistics Review Handbook of Descriptive LinguisticISSN 1544-7502 Review Handbook of Descriptive Linguistic

Bergqvist, Henrik

2011-01-01T23:59:59.000Z

77

Mode Splitting for Efficient Plasmoinc Thin-film Solar Cell  

E-Print Network (OSTI)

We propose an efficient plasmonic structure consisting of metal strips and thin-film silicon for solar energy absorption. We numerically demonstrate the absorption enhancement in symmetrical structure based on the mode coupling between the localized plasmonic mode in Ag strip pair and the excited waveguide mode in silicon slab. Then we explore the method of symmetry-breaking to excite the dark modes that can further enhance the absorption ability. We compare our structure with bare thin-film Si solar cell, and results show that the integrated quantum efficiency is improved by nearly 90% in such thin geometry. It is a promising way for the solar cell.

Li, Tong; Jiang, Chun

2010-01-01T23:59:59.000Z

78

Student Internship Programs Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Student Internship Programs Program Description The objective of the Laboratory's student internship programs is to provide students with opportunities for meaningful hands- on...

79

INTO Colorado State University, Academic Advisor: Short Description Position Description  

E-Print Network (OSTI)

INTO Colorado State University, Academic Advisor: Short Description Position Description INTO Colorado State University (INTO CSU) seeks one full-time, 12-month academic advisor who will advise INTO CSU students. The primary responsibility of the academic advisor is to promote and facilitate

Stephens, Graeme L.

80

SP 800-38B. Recommendation for Block Cipher Modes of Operation: the CMAC Mode for Authentication  

Science Journals Connector (OSTI)

This Recommendation specifies a message authentication code (MAC) algorithm based on a symmetric key block cipher. This block cipher-based MAC algorithm, called CMAC, may be used to provide assurance of the authenticity and, hence, the integrity of binary ... Keywords: Authentication, block cipher, cryptography, information security, integrity, message authentication code, mode of operation.

Morris J. Dworkin

2005-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Flammable gas tank exhauster interlock (FGTEI) computer software design description  

SciTech Connect

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.O., Westinghouse Hanford

1996-09-20T23:59:59.000Z

82

Flammable gas tank exhauster interlock (FGTEI) computer software design description  

SciTech Connect

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current-carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.0.

1996-09-10T23:59:59.000Z

83

Flammable gas tank exhauster interlock (LFGTEI) computer software design description  

SciTech Connect

Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

Smith, S.O.; Irvitt, R.W., Fluor Daniel Hanford

1997-02-21T23:59:59.000Z

84

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: Marketing Manager Date: 7/23/2013 Purpose of Position To manage and coordinate all marketing efforts for University Recreation with primary;Seattle University Recreation Position Description Title: Marketing Manager Date: 7/23/2013 Minimum

Carter, John

85

Web Page Development Company Description  

E-Print Network (OSTI)

Web Page Development Company Description: Service Provider web site Short Project Name: Research support and networking. Company Description: Website Building Company. This company drives traffic to websites through search engines, and optimizes websites over time. Short Project Name: Site Build Project

Dahl, David B.

86

Description of the Scenario Machine  

E-Print Network (OSTI)

We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

2007-04-11T23:59:59.000Z

87

Path Integral Junctions  

E-Print Network (OSTI)

We propose path integral description for quantum mechanical systems on compact graphs consisting of N segments of the same length. Provided the bulk Hamiltonian is segment-independent, scale-invariant boundary conditions given by self-adjoint extension of a Hamiltonian operator turn out to be in one-to-one correspondence with N \\times N matrix-valued weight factors on the path integral side. We show that these weight factors are given by N-dimensional unitary representations of the infinite dihedral group.

Satoshi Ohya

2012-01-24T23:59:59.000Z

88

Path Integral Junctions  

E-Print Network (OSTI)

We propose path integral description for quantum mechanical systems on compact graphs consisting of N segments of the same length. Provided the bulk Hamiltonian is segment-independent, scale-invariant boundary conditions given by self-adjoint extension of Hamiltonian operator turn out to be in one-to-one correspondence with N \\times N matrix-valued weight factors in the path integral side. We show that these weight factors are given by N-dimensional unitary representations of the infinite dihedral group.

Ohya, Satoshi

2012-01-01T23:59:59.000Z

89

1993 baseline solid waste management system description  

SciTech Connect

Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford`s solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents.

Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

1994-02-01T23:59:59.000Z

90

Integration of dynamic data into reservoir description using streamline approaches  

E-Print Network (OSTI)

............................................................................ 7 1.4 Dissertation Outline ................................................................................ 8 II METHODOLOGY OF PARAMETER ESTIMATION................................... 10 2.1 Fast Streamline Simulation as a Forward Model........................................ 22 3.2.4 Pressure and Streamline Updating .............................................. 24 3.3 Generalized Travel Time Inversion ....................................................... 24 3.3.1 Generalized Travel Time Inversion vs. Amplitude...

He, Zhong

2004-11-15T23:59:59.000Z

91

Deriving a mode logic using failure modes and effects analysis  

Science Journals Connector (OSTI)

Modes are widely used to structure the behaviour of control systems. However, derivation and verification of a mode logic for complex systems is challenging due to a large number of modes and intricate mode transitions. In this paper, we propose an approach to deriving, formalising and verifying consistency of a mode logic for fault-tolerant control systems. We propose to use failure modes and effects analysis (FMEA) to systematically derive the fault tolerance part of the mode logic. We formalise the mode logic and define mode consistency properties for layered systems with reconfigurable components. We use our formalisation to develop and verify a mode-rich system by refinement in Event-B.

Yuliya Prokhorova; Linas Laibinis; Elena Troubitsyna; Kimmo Varpaaniemi; Timo Latvala

2012-01-01T23:59:59.000Z

92

Storage Ring Operation Modes  

NLE Websites -- All DOE Office Websites (Extended Search)

Longitudinal bunch profile and Up: APS Storage Ring Parameters Longitudinal bunch profile and Up: APS Storage Ring Parameters Previous: Source Parameter Table Storage Ring Operation Modes Standard Operating Mode, top-up Fill pattern: 102 mA in 24 singlets (single bunches) with a nominal current of 4.25 mA and a spacing of 153 nanoseconds between singlets. Lattice configuration: Low emittance lattice with effective emittance of 3.1 nm-rad and coupling of 1%. Bunch length (rms): 33.5 ps. Refill schedule: Continuous top-up with single injection pulses occurring at a minimum of two minute intervals, or a multiple of two minute intervals. Special Operating Mode - 324 bunches, non top-up Fill pattern: 102 mA in 324 uniformly spaced singlets with a nominal single bunch current of 0.31 mA and a spacing of 11.37 nanoseconds between singlets.

93

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: University Recreation Fitness Center Recreation in the William F. Eisiminger Fitness Center and Archbishop Connolly Complex. Primary Duties all University Recreation and Fitness Center Policies · Educate members on proper Fitness Center

Carter, John

94

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: Connolly Complex Lifeguard Date: 7/or participants by enforcing the policies and procedures of the University Recreation Department. Primary Duties efficient and competent manner to the satisfaction of the Assistant Director of University Recreation

Carter, John

95

College of Engineering Program Description  

E-Print Network (OSTI)

College of Engineering Program Description e Surveying Engineering Technology Program trains individuals to enter a rewarding career in professional surveying. Professional surveying combines history, art, mathematics, communications, science, civil engineering, and business with surveying engineering

Thomas, Andrew

96

Description Plants ESIS ESD FSGD  

E-Print Network (OSTI)

Ecological Site Description Plants ESIS ESD FSGD ESI Forestland ESI Rangeland Data Access > Return CHARACTERISTICS Site Type: Rangeland Site Name: Red Sandy Loam 25-32" PZ Site ID: R082AY369TX Major Land Resource

97

GENERATING TEXT DESCRIPTIONS FOR GEOGRAPHICALLY DISTRIBUTED SENSORS  

E-Print Network (OSTI)

GENERATING TEXT DESCRIPTIONS FOR GEOGRAPHICALLY DISTRIBUTED SENSORS Martin Molina and Javier generation of geographic descriptions in natural language for geographically distributed sensors. We describe generation of geographic descriptions in natural language for geographically distributed sensors. We describe

Molina, Martín

98

Dual-Mode Hybrid/Two-Mode Hybrid Accomplishment  

NLE Websites -- All DOE Office Websites (Extended Search)

Dual-Mode Hybrid/Two-Mode Hybrid Accomplishment Dual-Mode Hybrid/Two-Mode Hybrid Accomplishment DOE-funded research, in collaboration with Allison Buses and General Motors Corporation has led to the commercialization of a dramatically different hybrid transmission system for heavy-duty and light-duty applications. The Dual-Mode or Two-Mode hybrid system is an infinitely variable speed hybrid transmission that works with the engine and battery system and automatically chooses to operate in a parallel or series hybrid path to maximize efficiency and minimize emissions, fuel consumption and noise. Parallel and Series hybrid configurations are found on most hybrid vehicles today, both with their own pluses and minuses. The Dual- Mode/Two-Mode systems uses the positive characteristics from both systems to maximize fuel

99

Optimum phase noise reduction and repetition rate tuning in quantum-dot mode-locked lasers  

SciTech Connect

Competing approaches exist, which allow control of phase noise and frequency tuning in mode-locked lasers, but no judgement of pros and cons based on a comparative analysis was presented yet. Here, we compare results of hybrid mode-locking, hybrid mode-locking with optical injection seeding, and sideband optical injection seeding performed on the same quantum dot laser under identical bias conditions. We achieved the lowest integrated jitter of 121 fs and a record large radio-frequency (RF) tuning range of 342?MHz with sideband injection seeding of the passively mode-locked laser. The combination of hybrid mode-locking together with optical injection-locking resulted in 240 fs integrated jitter and a RF tuning range of 167?MHz. Using conventional hybrid mode-locking, the integrated jitter and the RF tuning range were 620 fs and 10?MHz, respectively.

Habruseva, T. [CAPPA, Cork Institute of Technology, Cork (Ireland); Tyndall National Institute, Lee Maltings, Cork (Ireland); Aston University, Aston Triangle, B4 7ET Birmingham (United Kingdom); Arsenijevi?, D.; Kleinert, M.; Bimberg, D. [Institut für Festkörperphysik, Technische Universität Berlin, Berlin (Germany); Huyet, G.; Hegarty, S. P. [CAPPA, Cork Institute of Technology, Cork (Ireland); Tyndall National Institute, Lee Maltings, Cork (Ireland)

2014-01-13T23:59:59.000Z

100

Integrating Program Component Executables  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrating Integrating Program Component Executables on Distributed Memory Architectures via MPH Chris Ding and Yun He Computational Research Division, Lawrence Berkeley National Laboratory University of California, Berkeley, CA 94720, USA chqding@lbl.gov, yhe@lbl.gov Abstract A growing trend in developing large and complex ap- plications on today's Teraflop computers is to integrate stand-alone and/or semi-independent program components into a comprehensive simulation package. One example is the climate system model which consists of atmosphere, ocean, land-surface and sea-ice. Each component is semi- independent and has been developed at different institu- tions. We study how this multi-component multi-executable application can run effectively on distributed memory archi- tectures. We identify five effective execution modes and de- velop the MPH library to support

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Description of Building Types Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

102

Notices Description: Entergy Services, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

19 Federal Register 19 Federal Register / Vol. 76, No. 139 / Wednesday, July 20, 2011 / Notices Description: Entergy Services, Inc. Response to May 13, 2011 Deficiency Letter. Filed Date: 07/12/2011. Accession Number: 20110712-5164. Comment Date: 5 p.m. Eastern Time on Tuesday, August 02, 2011. Docket Numbers: ER11-2206-001. Applicants: Alta Wind V, LLC. Description: Alta Wind V, LLC, Notice of Non-Material Change in Status. Filed Date: 07/13/2011. Accession Number: 20110713-5091. Comment Date: 5 p.m. Eastern Time on Wednesday, August 03, 2011. Docket Numbers: ER11-3727-001. Applicants: El Segundo Energy Center LLC. Description: El Segundo Energy Center LLC submits tariff filing per 35.17(b): Supplement to Application for Market-Based Rate Authority to be effective 8/5/2011.

103

Ballooning Modes in the Systems Stabilized by Divertors  

SciTech Connect

MHD stability of a plasma in systems with closed magnetic field lines and open systems containing the nonparaxial stabilizing cells with large field lines curvature, in particular, divertors is analyzed. It is shown that population of particles trapped in such cells has a stabilizing effect not only on flute modes, but also on ballooning modes that determine the {beta} limit. At kinetic description that accounts for different effect of trapped and passing particles on perturbations, {beta} limit permitted by stability may be much greater then it follows from MHD model.

Arsenin, V.V.; Skovoroda, A.A.; Zvonkov, A.V. [Nuclear Fusion Institute, RRC Kurchatov Institute (Russian Federation)

2005-01-15T23:59:59.000Z

104

Slow modes in Keplerian disks  

E-Print Network (OSTI)

Low-mass disks orbiting a massive body can support "slow" normal modes, in which the eigenfrequency is much less than the orbital frequency. Slow modes are lopsided, i.e., the azimuthal wavenumber m=1. We investigate the properties of slow modes, using softened self-gravity as a simple model for collective effects in the disk. We employ both the WKB approximation and numerical solutions of the linear eigenvalue equation. We find that all slow modes are stable. Discrete slow modes can be divided into two types, which we label g-modes and p-modes. The g-modes involve long leading and long trailing waves, have properties determined by the self-gravity of the disk, and are only present in narrow rings or in disks where the precession rate is dominated by an external potential. In contrast, the properties of p-modes are determined by the interplay of self-gravity and other collective effects. P-modes involve both long and short waves, and in the WKB approximation appear in degenerate leading/trailing pairs. Disks support a finite number---sometimes zero---of discrete slow modes, and a continuum of singular modes.

Scott Tremaine

2000-11-30T23:59:59.000Z

105

Position Description Report Run Date Aug 28 2013 10:03AM  

E-Print Network (OSTI)

developer in all phases of analysis, design, implementation, testing, and integration of cloud applicationsPosition Description Report Run Date Aug 28 2013 10:03AM Position Number: 02015821 Dept: IET APPLICATION DEVELOPMENT - 061419 Position: SENIOR CLOUD INTEGRATION LEAD Approved Payroll Title Code: 7289

California at Davis, University of

106

Symplectic map description of Halley's comet dynamics  

E-Print Network (OSTI)

The main features of 1P/Halley chaotic dynamics can be described by a two dimensional symplectic map. Using Mel'nikov integral we semi-analytically determine such a map for 1P/Halley taking into account gravitational interactions from the Sun and the eight planets. We determine the Solar system kick function ie the energy transfer to 1P/Halley along one passage through the Solar system. Our procedure allows to compute for each planet its contribution to the Solar system kick function which appears to be the sum of the Keplerian potential of the planet and of a rotating circular gravitational dipole potential due to the Sun movement around Solar system barycenter. We test the robustness of the symplectic Halley map by directly integrating Newton's equations over $\\sim 2.4\\cdot 10^4$ yr around Y2K and by reconstructing the Solar system kick function. Our results show that the Halley map with fixed parameters gives a reliable description of comet dynamics on time scales of $10^4$ yr while on a larger scales the parameters of the map are slowly changing due to slow oscillations of orbital momentum.

G. Rollin; P. Haag; J. Lages

2015-02-02T23:59:59.000Z

107

Symplectic map description of Halley's comet dynamics  

E-Print Network (OSTI)

The main features of 1P/Halley chaotic dynamics can be described by a two dimensional symplectic map. Using Mel'nikov integral we semi-analytically determine such a map for 1P/Halley taking into account gravitational interactions from the Sun and the eight planets. We determine the Solar system kick function ie the energy transfer to 1P/Halley along one passage through the Solar system. Our procedure allows to compute for each planet its contribution to the Solar system kick function which appears to be the sum of the Keplerian potential of the planet and of a rotating circular gravitational dipole potential due to the Sun movement around Solar system barycenter. We test the robustness of the symplectic Halley map by directly integrating Newton's equations over $\\sim 2.4\\cdot 10^4$ yr around Y2K and by reconstructing the Solar system kick function. Our results show that the Halley map with fixed parameters gives a reliable description of comet dynamics on time scales of $10^4$ yr while on a larger scales the parameters of the map are slowly changing due to slow oscillations of orbital momentum.

P. Haag; G. Rollin; J. Lages

2014-10-14T23:59:59.000Z

108

Description  

NLE Websites -- All DOE Office Websites (Extended Search)

TTPs - Tools, Techniques, and Procedures Triage Transportation - Planes, Trains, and Automobiles Operator Proficiency WNRR 2013 The 2013 Western National Robot...

109

Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Josh Warner, Manager Contract Administration Mike Rose, Manager Smart GridDemand Response Lee Hall, Manager Programs Brent Barclay, Manager IndustrialAg Sector Lead...

110

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: University Recreation Operations Manager Date: 8/3/2012 Purpose of the Position The University Recreation Operations Manager assists walkthroughs of the Fitness Center · Provide on-site staff supervision in recreation facilities · Assist

Carter, John

111

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: Marketing Manager Date: 8/6/12 Purpose of Position To manage and coordinate all marketing efforts for University Recreation with primary Content Development · Info boards and frames · Promotional materials #12;Seattle University Recreation

Carter, John

112

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: University Recreation ST.A.R.T Member will assist in the promotion and awareness of the University Recreation Brand and programs to the students of all University Recreation Employees. ST.A.R.T Members are comprised of members of the University

Carter, John

113

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: Aquatic Manager Date: 7/19/2012 Purpose/or participants by enforcing the policies and procedures of the University Recreation Department. Primary Duties of University Recreation - Aquatics & Risk Management and the lifeguard team · Assign tasks to staff when

Carter, John

114

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: Aquatic Manager Date: 7/23/2013 Purpose/or participants by enforcing the policies and procedures of the University Recreation Department. Primary Duties of University Recreation - Aquatics & Risk Management and the lifeguard team · Assign tasks to staff when

Carter, John

115

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: Outdoor Adventure Recreation Program- inclusive. Duties may be added, deleted and assigned based on Assistant Director of University Recreation/patrons in a timely manner via email, phone, or other communication methods o Update University Recreation's Facebook

Carter, John

116

Seattle University Recreation Position Description  

E-Print Network (OSTI)

Seattle University Recreation Position Description Title: University Recreation Operations Manager Date: 7/23/2013 Purpose of the Position The University Recreation Operations Manager assists walkthroughs of the Fitness Center · Provide on-site staff supervision in recreation facilities · Assist

Carter, John

117

Sustainable Internet Architecture PROJECT DESCRIPTION  

E-Print Network (OSTI)

Sustainable Internet Architecture PROJECT DESCRIPTION 1 Introduction The Internet currently plays that the problems in the current Internet architecture stem from its lack of sustainability which impedes future de of challenges. Numerous research studies on a new Internet architecture (e.g., [16, 37, 48, 54, 55]) have

Kuzmanovic, Aleksandar

118

Project Description Executive Summary Report  

E-Print Network (OSTI)

$Total Project Cost: 1,000,000Auxillary Enterprises Balances $ 9,400,000Revenue Financing System Bonds $ 1Project Description Executive Summary Report Project Information Project Budget Project Funding 302-680 Parking Structure Phase I This project consists of a 750 space parking garage of approximately 251

O'Toole, Alice J.

119

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network (OSTI)

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: FOOD SERVICE HELPER (pay of food service to include food preparation and production, including customer service, equipment be assigned. Direct the activities of student food service workers in assigned area. Assist in the training

Endres. William J.

120

THE UNIVERSITY OF CLASSIFICATION DESCRIPTION  

E-Print Network (OSTI)

1 THE UNIVERSITY OF ROCHESTER CLASSIFICATION DESCRIPTION TITLE: Web Specialist and Analyst DATE: 01 ­ Advancement Service and provide assistance in the development and management of web-based assets, direct solicitations support ­ webpages for print and e-mail marketing support, web development, Share

Portman, Douglas

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS  

E-Print Network (OSTI)

2009­2010 ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS UNIVERSITY OF MICHIGAN #12;© 2008, degree options, and courses for the UM architecture program. This document is available for download from the Taubman College website at http://www.TaubmanCollege. umich.edu/architecture/bulletin/. If you

Kamat, Vineet R.

122

Early-stage Power Grid Analysis for Uncertain Working Modes  

E-Print Network (OSTI)

Early-stage Power Grid Analysis for Uncertain Working Modes Haifeng Qian Department of ECE circuits are now reaching the 100-plus watt regime, and power delivery and power grid signal integrity have and Design Aids General Terms Algorithms, Performance, Design, Reliability Keywords Power grid, Supply

Sapatnekar, Sachin

123

Quality Assurance Requirements and Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QjCivilianRadioactive QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160 Successful implementation of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance (QA) program is essential for the OCRWM to carry out its mission. Our mission is to manage and dispose ofbigh-Ievel radioactive waste and spent nuclear fuel in a manner that protects health, safety, and the environment; enhances national and energy security; and merits

124

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy Consumption Survey (CBECS) > Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 and 2003 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

125

Integrated optical XY coupler  

DOE Patents (OSTI)

An integrated optical XY coupler having two converging input waveguide arms meeting in a central section and a central output waveguide arm and two diverging flanking output waveguide arms emanating from the central section. In-phase light from the input arms constructively interferes in the central section to produce a single mode output in the central output arm with the rest of the light being collected in the flanking output arms. Crosstalk between devices on a substrate is minimized by this collection of the out-of-phase light by the flanking output arms of the XY coupler. 9 figs.

Vawter, G.A.; Hadley, G.R.

1997-05-06T23:59:59.000Z

126

Integrated optical XY coupler  

DOE Patents (OSTI)

An integrated optical XY coupler having two converging input waveguide arms meeting in a central section and a central output waveguide arm and two diverging flanking output waveguide arms emanating from the central section. In-phase light from the input arms constructively interfers in the central section to produce a single mode output in the central output arm with the rest of the light being collected in the flanking output arms. Crosstalk between devices on a substrate is minimized by this collection of the out-of-phase light by the flanking output arms of the XY coupler.

Vawter, G. Allen (Albuquerque, NM); Hadley, G. Ronald (Albuquerque, NM)

1997-01-01T23:59:59.000Z

127

Stability Studies of Two-dimensional Magnetic Bernstein-Greene-Kruskal Modes using Particle-in-Cell Simulations  

E-Print Network (OSTI)

Stability Studies of Two-dimensional Magnetic Bernstein-Greene-Kruskal Modes using Particle theoretical description of some of these structures is the concept of Bernstein-Greene-Kruskal (BGK) modes of their properties, including its energy content, temperature and velocity distribution, and stability. This work

Ng, Chung-Sang

128

Hybridization process for back-illuminated silicon Geiger-mode avalanche photodiode arrays  

E-Print Network (OSTI)

We present a unique hybridization process that permits high-performance back-illuminated silicon Geiger-mode avalanche photodiodes (GM-APDs) to be bonded to custom CMOS readout integrated circuits (ROICs) - a hybridization ...

Schuette, Daniel R.

129

A Novel Approach for Evaluating the Risk of Health Care Failure Modes  

Science Journals Connector (OSTI)

Failure mode and effects analysis (FMEA) can be employed to reduce medical errors ... data analysis. The approach is to integrate FMEA and a mathematical tool—Data envelopment analysis ... indexes (severity, occu...

Dong Shang Chang; Jenq Hann Chung; Kuo Lung Sun…

2012-12-01T23:59:59.000Z

130

Flexure modes in carbon nanotubes  

Science Journals Connector (OSTI)

Phonons are calculated for single wall carbon nanotubes. Eigenvalues and eigenvectors are presented for armchair and zig-zag tubes. The model contains just three adjustable spring constants: two for first and second nearest neighbor directed bonds, and a third for radial bond-bending interactions. There are four low frequency modes at long wavelength: a longitudinal acoustical, a torsional mode, and two flexure modes.

G. D. Mahan and Gun Sang Jeon

2004-08-09T23:59:59.000Z

131

Integration of Safety Culture Attributes into the EFCOG WP&C...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Guideline Document Addthis Description Slide Presentation by Steele Coddington, NSTec, Las Vegas and John McDonald, WRPS, Hanford. Integration of Safety Culture Attributes...

132

Insolation integrator  

DOE Patents (OSTI)

An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

1980-01-01T23:59:59.000Z

133

Inflation, Symmetry, and B-Modes  

E-Print Network (OSTI)

We examine the role of using symmetry and effective field theory in inflationary model building. We describe the standard formulation of starting with an approximate shift symmetry for a scalar field, and then introducing corrections systematically in order to maintain control over the inflationary potential. We find that this leads to models in good agreement with recent data. On the other hand, there are attempts in the literature to deviate from this paradigm by envoking other symmetries and corrections. In particular: in a suite of recent papers, several authors have made the claim that standard Einstein gravity with a cosmological constant and a massless scalar carries conformal symmetry. They further claim that such a theory carries another hidden symmetry; a global SO(1,1) symmetry. By deforming around the global SO(1,1) symmetry, they are able to produce a range of inflationary models with asymptotically flat potentials, whose flatness is claimed to be protected by these symmetries. These models tend to give rise to B-modes with small amplitude. Here we explain that these authors are merely introducing a redundancy into the description, not an actual conformal symmetry. Furthermore, we explain that the only real (global) symmetry in these models is not at all hidden, but is completely manifest when expressed in the Einstein frame; it is in fact the shift symmetry of a scalar field. When analyzed systematically as an effective field theory, deformations do not generally produce asymptotically flat potentials and small B-modes, but other types of potentials with B-modes of large amplitude; nicely compatible with recent BICEP2 data. Such simple models typically also produce the observed red spectral index, Gaussian fluctuations, etc. In short: simple models of inflation, organized by expanding around a shift symmetry, are in excellent agreement with recent data.

Mark P. Hertzberg

2014-03-20T23:59:59.000Z

134

Single-mode fiber, velocity interferometry  

SciTech Connect

In this paper, we describe a velocity interferometer system based entirely on single-mode fiber optics. This paper includes a description of principles used in developing the single-mode velocity interferometry system (SMV). The SMV design is based on polarization-insensitive components. Polarization adjusters are included to eliminate the effects of residual birefringence and polarization dependent losses in the interferometers. Characterization measurements and calibration methods needed for data analysis and a method of data analysis are described. Calibration is performed directly using tunable lasers. During development, we demonstrated its operation using exploding-foil bridge-wire fliers up to 200 m/s. In a final test, we demonstrated the SMV in a gas gun experiment up to 1.2 km/sec. As a basis for comparison in the gas gun experiment, we used another velocimetry technique that is also based on single-mode fiber optics: photonic Doppler velocimetry (PDV). For the gas gun experiment, we split the light returned from a single target spot and performed a direct comparison of the homodyne (SMV) and heterodyne (PDV) techniques concurrently. The two techniques had a negligible mean difference and a 1.5% standard deviation in the one-dimensional shock zone. Within one interferometer delay time after a sudden Doppler shift, a SMV unencumbered by multimode-fiber dispersion exhibits two color beats. These beats have the same period as PDV beats--this interference occurs between the ''recently'' shifted and ''formerly unshifted'' paths within the interferometer. We believe that recognizing this identity between homodyne and heterodyne beats is novel in the shock-physics field. SMV includes the conveniences of optical fiber, while removing the time resolution limitations associated with the multimode delivery fiber.

Krauter, K. G.; Jacobson, G. F.; Patterson, J. R.; Nguyen, J. H.; Ambrose, W. P. [Lawrence Livermore National Laboratory, 7000 East Ave., Livermore California 94551 (United States)

2011-04-15T23:59:59.000Z

135

CODE DESCRIPTION.............OBJECT DESCRIPTION 8110 Advertising General company advertising, and program or event advertising  

E-Print Network (OSTI)

CODE DESCRIPTION.............OBJECT DESCRIPTION 8110 Advertising General company advertising, and program or event advertising Note: Advertising for job opportunities is object code 8204 (Recruitment

de Lijser, Peter

136

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

137

Towards a model based approach for integration testing  

Science Journals Connector (OSTI)

In this paper, we introduce a model based approach for integration test cases generation. The approach is based on UML 2 Testing Profile and follows the Mode-Driven Architecture for generating integration test cases from unit test models. The generated ... Keywords: UTP, integration testing, model based testing, test cases generation

Mohamed Mussa; Ferhat Khendek

2011-07-01T23:59:59.000Z

138

The Projective Approach to Object Description  

E-Print Network (OSTI)

A methodology is presented for generating descriptions of objects from line drawings. Using projection of planes, objects in a scene can be parsed and described at the same time. The descriptions are hierarchical, and lend ...

Hollerbach, John M.

1972-12-15T23:59:59.000Z

139

ORIGINAL ARTICLE Approximate Truth and Descriptive Nesting  

E-Print Network (OSTI)

ORIGINAL ARTICLE Approximate Truth and Descriptive Nesting Jeffrey Alan Barrett Received: 7 July. This paper presents a notion of local probable approximate truth in terms of descriptive nesting relations

Barrett, Jeffrey A.

140

Descriptive Model of Generic WAMS  

SciTech Connect

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Hydrodynamic Description of Protein Folding  

Science Journals Connector (OSTI)

A hydrodynamic description of protein folding is proposed and illustrated with a lattice protein model, which has a free energy surface (FES) typical of proteins with two-state folding kinetics. The flows from the unfolded to the native state are concentrated in a limited region of the FES. The rest is occupied by a flow “vortex”, which does not lead to the native state. In contrast with intermediates that are associated with local minima, the vortex is not visible on the FES. The hydrodynamic interpretation thus provides new insights into the mechanism of protein folding and can be a useful complement to standard analyses.

Sergei F. Chekmarev; Andrey Yu. Palyanov; Martin Karplus

2008-01-11T23:59:59.000Z

142

Content of System Design Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-3024-2011 August 2011 ________________________ Superseding DOE-STD-3024-98 DOE STANDARD CONTENT OF SYSTEM DESIGN DESCRIPTIONS U.S. Department of Energy AREA EDCO Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-3024-2011 ii Available on the Department of Energy Technical Standards web page at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-3024-2011 iii CONTENTS PAGE Foreword ..................................................................................................................................................... iv 1. PURPOSE ............................................................................................................................................1

143

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network (OSTI)

SUMMARY: Serve as a clerical support for Kinesiology & Integrative Physiology Education and the Intramural correspondence and other written material such as, flyers, announcements, schedules, mail merges, posters accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION

Endres. William J.

144

Environmental Program Description for the Tank Farm Contractor  

SciTech Connect

This Environmental Program Description has been developed in support of the Integrated Environmental, Safety, and Health Management System and consistent with the goals of DOE/RL-96-50, Hanford Strategic Plan. This Environmental Program Plan was developed in support of the Integrated Environment, Safety, and Health Management System Description for the Tank Farm Contractor (ISMS) (RPP-MP-003), which establishes a single, defined environmental, safety, and health management system that integrates requirements into the work planning and execution processes to protect workers, the public, and the environment. The ISMS also provides mechanisms for increasing worker involvement in work planning, including hazard and environmental impact identification, analysis, and control; work execution; and feedback/improvement processes. The ISMS plan consists of five core functions. Each section of this plan describes the activities (formerly known as the Tank Waste Remediation System) of the Tank Farm Contractor (TFC) environmental organization according to the following core functions: Establish Environmental Policy and Define Work Scope; Identify Hazards, Environmental Impacts, and Requirements; Analyze Hazards and Environmental Impacts and Implement Controls; Provide Feedback and Continuous Improvement; and Perform Work within Controls.

POWELL, P.A.

2000-04-20T23:59:59.000Z

145

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Title, Location Title, Location Estimated Cost Description Determination Date: 2010 LCLS Undulator 2 is envisioned to be a 0.2 - 2keV FEL x-ray source, capable of delivering x-rays to End Station A (ESA), located in the existing Research Yard at SLAC. It will also be configurable as a non- FEL hard x-ray source capable of delivering a chirped x-ray pulse for single-shot broad-spectrum measurements. The project would entail reconstruction of the electron beam transport to End Station A, construction and installation of a new undulator in the tunnel upstream of ESA and beam dump, and construction and installation of x-ray transport, optics, and diagnostics in ESA. It also includes the construction of an annex to End Station A , providing hutches for experiment stations.

146

Estimated Cost Description Determination Date:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and posted 2/10/2011 and posted 2/10/2011 *Title, Location Estimated Cost Description Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain $50,000 FONSI: uncertain Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $70,000 Attachment: Memo, Moody to Marcinowski, III, SUBJECT: NEPA 2011 APS for DOE-SRS, Dated: Annual NEPA Planning Summary Environmental Assessments (EAs) Expected to be Initiated in the Next 12 Months Department of Energy (DOE) Savannah River Site (SRS) Jan-11 Estimated Schedule (**NEPA Milestones) South Carolina Department of Health and Environmental Control (SCDHEC) issued a National Pollutant Discharge Elimination System (NPDES) Industrial Stormwater General Permit (IGP) # SCR000000 November 12, with an effective date of January

147

Mode synthesizing atomic force microscopy and mode-synthesizing sensing  

DOE Patents (OSTI)

A method of analyzing a sample that includes applying a first set of energies at a first set of frequencies to a sample and applying, simultaneously with the applying the first set of energies, a second set of energies at a second set of frequencies, wherein the first set of energies and the second set of energies form a multi-mode coupling. The method further includes detecting an effect of the multi-mode coupling.

Passian, Ali; Thundat, Thomas George; Tetard, Laurene

2013-05-17T23:59:59.000Z

148

Localized defect modes in graphene  

Science Journals Connector (OSTI)

We study the properties of localized vibrational modes associated with structural defects in a sheet of graphene. For the examples of the Stone-Wales defects, one- and two-atom vacancies, many-atom linear vacancies, and adatoms in a honeycomb lattice, we demonstrate that the local defect modes are characterized by stable oscillations with the frequencies lying outside the linear frequency bands of an ideal graphene. In the frequency spectral density of thermal oscillations, such localized defect modes lead to the additional peaks from the right side of the frequency band of the ideal sheet of graphene, which indicate the presence of defects in the graphene flakes.

Alexander V. Savin and Yuri S. Kivshar

2013-09-11T23:59:59.000Z

149

Systems Integration  

Energy.gov (U.S. Department of Energy (DOE))

Through the SunShot Initiative, the U.S. Department of Energy (DOE) supports the development of innovative, cost-effective solutions that allow increasing amounts of solar energy to integrate...

150

Integration elements  

Science Journals Connector (OSTI)

Market-based integration is simple: Do whatever you want, the rest is up to the market. This model of the individual and its relation to others best suits the logic of the consumer society ?self-orientation an...

Dr. Eric Dieth

2011-01-01T23:59:59.000Z

151

Procurement Integrity  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

employment with certain bidders or offerors. This chapter is intended to act as a primer for all DOE employees on issues related to procurement integrity. As such, not all...

152

Ultrafast spectroscopy of super high frequency mechanical modes of doubly clamped beams  

SciTech Connect

We use ultrafast pump-probe spectroscopy to study the mechanical vibrations in the time domain of doubly clamped silicon nitride beams. Beams with two different clamping conditions are investigated. Finite element method calculations are performed to analyse the mode spectra of both structures. By calculating the strain integral on the surface of the resonators, we are able to reproduce the effect of the detection mechanism and identify all the measured modes. We show that our spectroscopy technique combined with our modelling tools allow the investigation of several different modes in the super high frequency range (3-30?GHz) and above, bringing more information about the vibration modes of nanomechanical resonators.

Ristow, Oliver; Merklein, Moritz; Grossmann, Martin; Hettich, Mike; Schubert, Martin; Bruchhausen, Axel; Scheer, Elke; Dekorsy, Thomas; Barretto, Elaine C. S., E-mail: elaine.barretto@uni-konstanz.de [Department of Physics and Center of Applied Photonics, University of Konstanz, D-78457 Konstanz (Germany)] [Department of Physics and Center of Applied Photonics, University of Konstanz, D-78457 Konstanz (Germany); Grebing, Jochen; Erbe, Artur [Helmholtz-Zentrum Dresden - Rossendorf, Institute of Ion-Beam Physics and Materials Research, D-01328 Dresden (Germany)] [Helmholtz-Zentrum Dresden - Rossendorf, Institute of Ion-Beam Physics and Materials Research, D-01328 Dresden (Germany); Mounier, Denis [IMMM, UMR-CNRS 6283, ENSIM, PRES UNAM, Université du Maine, 72085 Le Mans (France)] [IMMM, UMR-CNRS 6283, ENSIM, PRES UNAM, Université du Maine, 72085 Le Mans (France); Gusev, Vitalyi [LAUM, UMR-CNRS 6613, PRES UNAM, Université du Maine, 72085 Le Mans (France)] [LAUM, UMR-CNRS 6613, PRES UNAM, Université du Maine, 72085 Le Mans (France)

2013-12-02T23:59:59.000Z

153

Microsoft Word - 564M_Biomass_Project Descriptions FINAL 120409...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 More...

154

Peeling mode relaxation ELM model  

SciTech Connect

This paper discusses an approach to modelling Edge Localised Modes (ELMs) in which toroidal peeling modes are envisaged to initiate a constrained relaxation of the tokamak outer region plasma. Relaxation produces both a flattened edge current profile (which tends to further destabilise a peeling mode), and a plasma-vacuum negative current sheet which has a counteracting stabilising influence; the balance that is struck between these two effects determines the radial extent (rE) of the ELM relaxed region. The model is sensitive to the precise position of the mode rational surfaces to the plasma surface and hence there is a 'deterministic scatter' in the results that has an accord with experimental data. The toroidal peeling stability criterion involves the edge pressure, and using this in conjunction with predictions of rE allows us to evaluate the ELM energy losses and compare with experiment. Predictions of trends with the edge safety factor and collisionality are also made.

Gimblett, C. G. [EURATOM/UKAEA Fusion Association, Culham Science Centre Abingdon, Oxon, OX14 3DB (United Kingdom)

2006-11-30T23:59:59.000Z

155

NREL: Energy Systems Integration - Integrated Deployment Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Workshop Integrated Deployment Workshop The Energy Systems Integration Facility workshop, Integrated Deployment, was held August 21 - 23, 2012 at the National Renewable Energy Laboratory in Golden, Colorado. Each day of the workshop, which included a tour of the Energy Systems Integration Facility, focused on a different topic: Day 1: Utility-Scale Renewable Integration Day 2: Distribution-Level Integration Day 3: Isolated and Islanded Grid Systems The agenda and presentations from the workshop are below. Agenda Energy Systems Integration Facility Overview ESIF Technology Partnerships Integrated Deployment Model Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings Printable Version Energy Systems Integration Home Research & Development

156

Existence of Metastable Kinetic Modes  

SciTech Connect

The nonlinear evolution of resonantly driven systems, such as suprathermal particle driven modes in magnetically confined plasmas, is shown to strongly depend on the existence and nature of an underlying damping mechanism. When background resonant damping is present, subcritical states can take place. In particular, purely nonlinear steady-state regimes are found, whose destabilization threshold and saturation levels are calculated and validated using numerical simulations. This nonlinear behavior can be of relevance for acoustic modes in magnetically confined plasmas.

Nguyen, C.; Luetjens, H.; Garbet, X.; Grandgirard, V.; Lesur, M. [Centre de Physique Theorique, CNRS-Ecole Polytechnique, Palaiseau (France); CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); JAEA, Higashi-Ueno 6-9-3, Taitou, Tokyo, 110-0015 (Japan)

2010-11-12T23:59:59.000Z

157

``What's not in a name?'' Initial Explorations of a Structural Approach to Integrating Large  

E-Print Network (OSTI)

, a traditional step in database design has been so­called ``view integration'': taking the descriptions. Then, the integration of the ontologies can guide the integration of the views. ffl Finally, databases``What's not in a name?'' Initial Explorations of a Structural Approach to Integrating Large

Baader, Franz

158

Electrostatic Structures in Space Plasmas: Properties of Two-dimensional Magnetic Bernstein-Greene-Kruskal Modes  

E-Print Network (OSTI)

Electrostatic Structures in Space Plasmas: Properties of Two-dimensional Magnetic Bernstein-Greene theoretical description of some of these structures is the concept of Bernstein-Greene-Kruskal (BGK) modes of their properties, including its energy content, temperature and velocity distribution, and stability. This work

Ng, Chung-Sang

159

Property:File/Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name File/Description Property Type Text Description Description of the file's contents/purpose. Pages using the property "File/Description" Showing 25 pages using this property. (previous 25) (next 25) A Australia-Solar-Map.png + Average Daily Solar Exposure: Australia B BOEMRE OCS.oil.gas.2007-12.map.pdf + Outer Continental Shelf (OCS) Oil & Gas Leasing Program 2007 - 2012 BOEMRE US.CSB.Map.pdf + US Continental Shelf Boundary (CSB) Areas BOEMRE US.CSB.bathy.map.pdf + Outer Continental Shelf (OCS) Boundary Areas, in color BOEMRE atlantic.OCS.multiple.use.map.2003.pdf + Multiple Uses of the Atlantic Outer Continental Shelf BOEMRE lease.platforms.santa.barb.map.5.2010.pdf + Federal Leases in Pacific Ocean, near Santa Maria Basin

160

Evaluation of Some Blockcipher Modes of Operation  

E-Print Network (OSTI)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4. CBC, CFB, and OFB Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5. CTR; many are widely used. The modes under consideration are the encryption schemes ECB, CBC, CFB, OFB, CTR

Rogaway, Phillip

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Evaluation of Some Blockcipher Modes of Operation  

E-Print Network (OSTI)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4. CBC, CFB, and OFB Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5. CTR are widely used. The modes under consideration are the encryption schemes ECB, CBC, CFB, OFB, CTR, and XTS

Rogaway, Phillip

162

Occupant satisfaction in mixed-mode buildings.  

E-Print Network (OSTI)

Strategies for Mixed-Mode Buildings, Summary Report, CenterCBE). 2006. Website: Mixed-Mode Building Case Studies.Department of Environmental Building Research Establishment

Brager, Gail; Baker, Lindsay

2008-01-01T23:59:59.000Z

163

Occupant satisfaction in mixed-mode buildings  

E-Print Network (OSTI)

Environmental Quality in Green Buildings”. Indoor Air; 14 (Strategies for Mixed-Mode Buildings, Summary Report, CenterCBE). 2006. Website: Mixed-Mode Building Case Studies.

Brager, Gail; Baker, Lindsay

2009-01-01T23:59:59.000Z

164

Machinist Pipeline/Apprentice Program Program Description  

NLE Websites -- All DOE Office Websites (Extended Search)

Machinist PipelineApprentice Program Program Description The Machinist Pipeline Program was created by the Prototype Fabrication Division to fill a critical need for skilled...

165

Phenomenological description of bidirectional surface reflection  

E-Print Network (OSTI)

Phenomenological description of bidirectional surface reflection Jan J. Koenderink and Andrea J satellites). In some cases one has (usually approximate, phenomenological) models, but in most cases one

O'Brien, James F.

166

Property:Wavemaking Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Wavemaking Description Property Type Text Pages using the property "Wavemaking Description" Showing 25 pages using this property. (previous 25) (next 25) A Alden Large Flume + Wave generators not yet designed Alden Small Flume + Period adjustable electronically, height adjustable mechanically Alden Wave Basin + Period adjustable electronically, height adjustable mechanically C Carderock Maneuvering & Seakeeping Basin + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions. Carderock Tow Tank 2 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions Carderock Tow Tank 3 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions.

167

integr~1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 AUDIT REPORT THE U.S. DEPARTMENT OF ENERGY' S MANAGEMENT OF RESEARCH AND DEVELOPMENT INTEGRATION MARCH 1998 U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES DEPARTMENT OF ENERGY Washington, DC 20585 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Principal Deputy Inspector General SUBJECT: INFORMATION : Audit Report on "Audit of the Department of Energy's Management of Research and Development Integration" BACKGROUND The Congress, independent task forces, and advisory groups have pointed out the need for the Department to improve its integration of research and development (R&D) projects. In the past, R&D management was carried out by different program offices with the research being

168

Integrated safety management system verification: Volume 2  

SciTech Connect

Department of Energy (DOE) Policy (P) 450.4, Safety Management System Policy, commits to institutionalization of an Integrated Safety Management System (ISMS) throughout the DOE complex. The DOE Acquisition Regulations (DEAR, 48 CFR 970) requires contractors to manage and perform work in accordance with a documented Integrated Safety Management System (ISMS). Guidance and expectations have been provided to PNNL by incorporation into the operating contract (Contract DE-ACM-76FL0 1830) and by letter. The contract requires that the contractor submit a description of their ISMS for approval by DOE. PNNL submitted their proposed Safety Management System Description for approval on November 25,1997. RL tentatively approved acceptance of the description pursuant to a favorable recommendation from this review. The Integrated Safety Management System Verification is a review of the adequacy of the ISMS description in fulfilling the requirements of the DEAR and the DOE Policy. The purpose of this review is to provide the Richland Operations Office Manager with a recommendation for approval of the ISMS description of the Pacific Northwest Laboratory based upon compliance with the requirements of 49 CFR 970.5204(-2 and -78); and to verify the extent and maturity of ISMS implementation within the Laboratory. Further the review will provide a model for other DOE laboratories managed by the Office of Assistant Secretary for Energy Research.

Christensen, R.F.

1998-08-10T23:59:59.000Z

169

Quantum and classical separability of spin-orbit laser modes  

E-Print Network (OSTI)

In this work we investigate the quantum noise properties of polarization vortices in connection with an intensity based Clauser-Horne-Shimony-Holt inequality for their spin-orbit separability. We evaluate the inequality for different input quantum states and the corresponding intensity fluctuations. The roles played by coherence and photon number squeezing provide a suitable framework for characterizing pure state spin-orbit entanglement. Structural inseparability of the spin-orbit mode requires coherence, an issue concerning either classical or quantum descriptions. In both cases, it can be witnessed by violation of this intensity based CHSH inequality. However, in the quantum domain, entanglement requires both coherence and reduced photon number fluctuations.

L. J. Pereira; A. Z. Khoury; K. Dechoum

2014-09-02T23:59:59.000Z

170

Position Description Report Run Date Aug 28 2013 2:46PM  

E-Print Network (OSTI)

of analysis, design, implementation, testing, and integration of applications supported by EAISPosition Description Report Run Date Aug 28 2013 2:46PM Position Number: TBD Dept: IET APPLICATION DEVELOPMENT - 061419 Position: APPLICATION DEVELOPER Approved Payroll Title Code: TBD Approved Payroll Title

California at Davis, University of

171

Integrated System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Window System Our research activities in the field of high performance windows have led us to conclude that even by using high performance insulating glass units, low conductivity frames, and warm edge spacers, there are still untapped sources for improving energy efficiency in the design and use of residential windows. While such high performance windows are a dramatic improvement over conventional units, they do not reduce conductive losses through wall framing around the window, offer guarantees against excessive wall/window infiltration nor do they adapt to the daily and seasonal potentials for night insulation and summer shading. To meet this need, we have been working on the design, development, and prototyping of Integrated Window Systems (IWS) since 1993. Integrated Window Systems are a form of panelized construction where the wall panel includes an operable or fixed window sash, recessed night insulation, integral solar shading, and is built in a factory setting in order to minimize thermal short circuits and infiltration at joints. IWSs can be built in modular lengths to facilitate their installation with conventional wood frame stick construction or other forms of panelized construction.

172

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network (OSTI)

Fuel oil and Turkey Based Biofuel Energy Rocovery 12,000 Industrial Waste $30,000 $500 $29,500 1500WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2006 WASTE TYPE DESCRIPTION DETAILS * Aerosol Can Disposal System Recycling 528 66 pounds of hazardous waste per unit $7

173

Vibrational Modes of Adsorbed Atoms  

E-Print Network (OSTI)

for AronXe B. Neon Ar The lowest surface m ver g.ur ace mode branc mo d o' td 'th es of the " rin " ce e wit an adsorbate of modes assoc' tia ed with th e; there are for the ads stion, the bra h sorbate atoms I c 1.ons ranch labeled 2H s. n... , are the real ads teristic force con t tons ants for ad is evident that in Fi . 2 t "heavier" than th ig. the adsorbate is n e substrate M & terpretation b M, ) in tkis in- ecause the weaknes th l' ht ofth ds o ke adsorbate atoms (m, &m, IBRATIQNAI...

LAWRENCE, WR; Allen, Roland E.

1977-01-01T23:59:59.000Z

174

Phase space theory of Bose-Einstein condensates and time-dependent modes  

E-Print Network (OSTI)

A phase space theory approach for treating dynamical behaviour of Bose-Einstein condensates applicable to situations such as interferometry with BEC in time-dependent double well potentials is presented. Time-dependent mode functions are used, chosen so that one, two,.. highly occupied modes describe well the physics of interacting condensate bosons in time dependent potentials at well below the transition temperature. Time dependent mode annihilation, creation operators are represented by time dependent phase variables, but time independent total field annihilation, creation operators are represented by time independent field functions. Two situations are treated, one (mode theory) is where specific mode annihilation, creation operators and their related phase variables and distribution functions are dealt with, the other (field theory) is where only field creation, annihilation operators and their related field functions and distribution functionals are involved. The paper focuses on the hybrid approach, where the modes are divided up between condensate (highly occupied) modes and non-condensate (sparsely occupied) modes. It is found that there are extra terms in the Ito stochastic equations both for the stochastic phases and stochastic fields, involving coupling coefficients defined via overlap integrals between mode functions and their time derivatives. For the hybrid approach both the Fokker-Planck and functional Fokker-Planck equations differ from those derived via the correspondence rules, the drift vectors are unchanged but the diffusion matrices contain additional terms involving the coupling coefficients. Results are also presented for the combined approach where all the modes are treated as one set.

B. J. Dalton

2012-07-20T23:59:59.000Z

175

Distinct Modes of Internal Variability in the Global Meridional Overturning Circulation Associated with the Southern Hemisphere Westerly Winds  

Science Journals Connector (OSTI)

The internal variability of the global meridional overturning circulation (GMOC) in long-term integration of the earth system model Community Earth System Models (COSMOS) is examined in this study. Two distinct modes of the GMOC, which are closely ...

Wei Wei; Gerrit Lohmann; Mihai Dima

2012-05-01T23:59:59.000Z

176

Behaviour and stability of Trivelpiece-Gould modes in non-neutral plasma containing small density fraction of background gas ions  

SciTech Connect

It is shown that the frequencies of Trivelpiece-Gould (TG) modes in non-neutral plasma can get into the low-frequency range due to the Doppler shift caused by plasma rotation in crossed fields. TG modes interact with the ion modes that leads to plasma instability. In paper the frequency spectrum of 'cold' electron plasma completely filling a waveguide and containing small density fraction of ions of background gas is determined numerically. For ions the kinetic description is used. Oscillations having azimuthal number m= 2 are considered. In this case both low- and upper-hybrid TG modes get into the low-frequency range. The spectrum consists of families of 'modified' ion cyclotron (MIC) modes and electron TG modes with the frequencies equal to hybrid frequencies with the Doppler shift. The growth rates of upper-hybrid modes are much faster than the growth rates of low-hybrid and MIC modes.

Yeliseyev, Y. N. [Institute of Plasma Physics, National Science Center Kharkov Institute of Physics and Technology, Akademicheskaya St., 1, 61108 Kharkov (Ukraine)

2013-03-19T23:59:59.000Z

177

Coexistence of mixed mode multipactor  

SciTech Connect

Multipactor is a vacuum discharge based on secondary electron emission, and can manifest in many resonant and non-resonant modes. Where two or more types of multipactor coexist in the same device, it is found analytically that the one with the highest yield or the lowest order dominates.

Kishek, R. A. [Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742 (United States)

2012-12-15T23:59:59.000Z

178

Reference Design Description for a Geologic Repository  

SciTech Connect

One of the current major national environmental problems is the safe disposal of large quantities of spent nuclear fuel and high-level radioactive waste materials, which are rapidly accumulating throughout the country. These radioactive byproducts are generated as the result of national defense activities and from the generation of electricity by commercial nuclear power plants. At present, spent nuclear fuel is accumulating at over 70 power plant sites distributed throughout 33 states. The safe disposal of these high-level radioactive materials at a central disposal facility is a high national priority. This Reference Design Description explains the current design for a potential geologic repository that may be located at Yucca Mountain in Nevada for the disposal of spent nuclear fuel and high-level radioactive waste materials. This document describes a possible design for the three fundamental parts of a repository: a surface facility, subsurface repository, and waste packaging. It also presents the current conceptual design of the key engineering systems for the final four phases of repository processes: operations, monitoring, closure, and postclosure. In accordance with current law, this design does not include an interim storage option. In addition, this Reference Design Description reviews the expected long-term performance of the potential repository. It describes the natural barrier system which, together with the engineered systems, achieves the repository objectives. This design will protect the public and the environment by allowing the safe disposal of radioactive waste received from government-owned custodial spent fuel sites, high-level radioactive waste sites, and commercial power reactor sites. All design elements meet or exceed applicable regulations governing the disposal of high-level radioactive waste. The design will provide safe disposal of waste materials for at least a 10,000 year period. During this time interval, natural radioactive decay of the waste materials will result in fission products that pose a minimal radiological hazard to the public afterward. For example, after 100 years, the relative hazard from the waste fission products will have diminished approximately 90 percent. After 1,000 years, the hazard will have diminished 99 percent, and after 10,000 years it will have diminished 99.9 percent. The resulting radiological hazard after 10,000 years is minimal, being of the same order of magnitude as that posed by 0.2 percent uranium ore, which is equivalent to that which was used to originally produce the nuclear fuel. Because developing such a repository is extremely complex, the design will move forward in three stages: Site Recommendation, License Application, and Construction. This document presents the design as it will be submitted in the Site Recommendation Consideration Report; the design will be updated as the design process moves forward. As more cost-effective solutions, technical advancements, or changes to requirements occur, the design may evolve. The U.S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management is developing a system that includes this potential repository. This waste management system integrates acceptance, transportation, storage, and disposal of spent nuclear fuel and high-level radioactive waste. Acceptance and transportation will be handled by regional servicing contractors under contract to the DOE. The U.S. Nuclear Regulatory Commission will conduct an in-depth and thorough licensing review to determine the acceptability of the proposed waste management system. Eight sections of this document follow. Section 2 discusses the design requirements for the proposed repository. Section 3 describes the physical layout of the proposed repository. Section 4 describes the evolutionary phases of the development of the proposed repository. Section 5 describes the receipt of waste. Section 6 details the various systems that will package the waste and move it below ground, as well as safety monitoring and closure. Section 7 describes the syst

NA

2000-10-07T23:59:59.000Z

179

Characterization of core and edge turbulence in L-and H-mode Alcator C-Mod plasmas  

E-Print Network (OSTI)

by studying fluctuations in the electron density of Alcator C-Mod plasmas using reflectometry [1] and phase to study turbulence associated with H-L-mode backtransitions, the so-called enhanced neutron (EN-) modes towards the plasma core. Correlating the reflectometry measurements with the PCI line-integrated vertical

Basse, Nils Plesner

180

Chemical preconcentrator with integral thermal flow sensor  

DOE Patents (OSTI)

A chemical preconcentrator with integral thermal flow sensor can be used to accurately measure fluid flow rate in a microanalytical system. The thermal flow sensor can be operated in either constant temperature or constant power mode and variants thereof. The chemical preconcentrator with integral thermal flow sensor can be fabricated with the same MEMS technology as the rest of the microanlaytical system. Because of its low heat capacity, low-loss, and small size, the chemical preconcentrator with integral thermal flow sensor is fast and efficient enough to be used in battery-powered, portable microanalytical systems.

Manginell, Ronald P. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM)

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Integrated Safety Management Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Integrated Safety Management Policy Integrated Safety Management Policy This Integrated Safety Management (ISM) System Description (ISMSD) defines how the U.S. Department of Energy (DOE) Office of Environmental Management (EM) integrates environment, safety, and health requirements and controls into Federal work activities, and oversees implementation of ISM within EM federal and contractor activities. It explains our safety values, objectives and approach for ensuring protection to the public, worker and the environment, consistent with DOE Policy 450.4, Safety Management System Policy. The ISMSD describes how EM conducts work following the seven ISM Guiding Principles, the five ISM core functions, and also incorporates the four supplemental safety culture elements from DOE Implementation Plan to

182

DOE Hydrogen Analysis Repository: Biomass Integrated Gasification  

NLE Websites -- All DOE Office Websites (Extended Search)

Biomass Integrated Gasification Combined-Cycle Power Systems Biomass Integrated Gasification Combined-Cycle Power Systems Project Summary Full Title: Cost and Performance Analysis of Biomass-Based Integrated Gasification Combined-Cycle (BIGCC) Power Systems Project ID: 106 Principal Investigator: Margaret Mann Brief Description: This project examines the cost and performance potential of three biomass-based integrated gasification combined cycle (IGCC) systems--high-pressure air blown, low-pressure air blown, and low-pressure indirectly heated. Purpose Examine the cost and performance potential of three biomass-based integrated gasification combined cycle (IGCC) systems - a high pressure air-blown, a low pressure indirectly heated, and a low pressure air-blown. Performer Principal Investigator: Margaret Mann

183

Integrated Safety Management Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Program Management » Quality Assurance » Integrated Services » Program Management » Quality Assurance » Integrated Safety Management Policy Integrated Safety Management Policy This Integrated Safety Management (ISM) System Description (ISMSD) defines how the U.S. Department of Energy (DOE) Office of Environmental Management (EM) integrates environment, safety, and health requirements and controls into Federal work activities, and oversees implementation of ISM within EM federal and contractor activities. It explains our safety values, objectives and approach for ensuring protection to the public, worker and the environment, consistent with DOE Policy 450.4, Safety Management System Policy. The ISMSD describes how EM conducts work following the seven ISM Guiding Principles, the five ISM core functions, and also incorporates the

184

Transportation Sector Energy Use by Fuel Type Within a Mode from EIA AEO  

Open Energy Info (EERE)

Sector Energy Use by Fuel Type Within a Mode from EIA AEO Sector Energy Use by Fuel Type Within a Mode from EIA AEO 2011 Early Release Dataset Summary Description Supplemental Table 46 of EIA AEO 2011 Early Release Source EIA Date Released December 08th, 2010 (3 years ago) Date Updated Unknown Keywords AEO Annual Energy Outlook EIA Energy Information Administration Fuel mode TEF transportation Transportation Energy Futures Data text/csv icon Transportation_Sector_Energy_Use_by_Fuel_Type_Within_a_Mode.csv (csv, 144.3 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Annually Time Period 2008-2035 License License Open Data Commons Public Domain Dedication and Licence (PDDL) Comment Rate this dataset Usefulness of the metadata Average vote Your vote Usefulness of the dataset Average vote Your vote

185

Integrated Building Management System (IBMS) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building Management System Building Management System (IBMS) Integrated Building Management System (IBMS) The U.S. Department of Energy (DOE) is currently conducting research into an integrated building management system (IBMS). Project Description This project seeks to develop an open integration framework that allows multivendor systems to interoperate seamlessly using internet protocols. The applicant will create an integrated control platform for implementing new integrated control strategies and to enable additional enterprise control applications, such as demand response. The project team seeks to develop several strategies that take advantage of the sensors and functionality of heating, ventilation, and air conditioning (HVAC); security; and information and communication technologies (ICT) subsystems;

186

PARS II Course Descriptions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptions Descriptions PARS II Course Descriptions Sign up for PARS 102 or PARS 103, depending on your project assessment role and function. PARS 104 will be offered to site contractors as part of Dekker's Contractor deployment training. # Course Name Course Description Intended Audience PARS 102 Monthly Updating and Reporting Duration: 4 hrs Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. Individuals who do not require monthly update training will be excused approximately one half hour early. FPD and Program staff who update the OA Monthly Status, but not other OA data.

187

Project Manager, TBD Job Description Questionnaire (JDQ)  

E-Print Network (OSTI)

Project Manager, TBD Job Description Questionnaire (JDQ) Professional Staff Instructions What with a disability in regard to job application procedures, the hiring or discharge of employees, employee Below to Certify Approval or Disapproval: Approval Disapproval ( ) ( ) TBD, Project Manager

Barrash, Warren

188

CHP R&D Project Descriptions  

Energy.gov (U.S. Department of Energy (DOE))

The CHP R&D project portfolio includes advanced reciprocating engine systems (ARES), packaged CHP systems, high-value applications, fuel-flexible CHP, and demonstrations of these technologies. Project fact sheets and short project descriptions are provided below:

189

Position Description: Remote Sensing/GIS Analyst  

E-Print Network (OSTI)

, gpx, etc. · Aptitude for creating publication quality maps using GIS software Position Description: Remote Sensing/GIS Analyst We are seeking a Remote Sensing/GIS Analyst to support our forest carbon project validation

Mazzotti, Frank

190

COURSE TITLES COURSE DESCRIPTIONS Organizational Behavior &  

E-Print Network (OSTI)

COURSE TITLES COURSE DESCRIPTIONS MGT 5371 Organizational Behavior & Organizational Design Examines management of individual, interpersonal, group and intergroup relations, organizational design and experiential learning to accelerate their development as authentic leaders. MGT 5373 Opportunity Creation

Rock, Chris

191

A boundary element solution for a mode conversion study on the edge reflection of Lamb waves  

Science Journals Connector (OSTI)

The boundary element method well known for bulk wave scattering is extended to study the mode conversion phenomena of Lamb waves from a free edge. The elastodynamic interior boundary value problem is formulated as a hybrid boundary integralequation in conjunction with the normal mode expansion technique based on the Lamb wave dispersion equation. The present approach has the potential of easily handling the geometrical complexity of general guided wave scattering with improved computational efficiency due to the advantage of the boundary?type integral method. To check the accuracy of the boundary element program vertical shear wave diffraction due to a circular hole is solved and compared with previous analytical solutions. Edge reflection factors for the multibackscattered modes in a steel plate are satisfied quite well with the principle of energy conservation. In the cases of A0 A1 and S0 incidence the variations of the multireflection factors show similar tendencies to the existing results for glass. It is observed that the reflection of an incident wave becomes close to zero over a certain frequency range seen through energy interaction with other reflected modes and increases again beyond this minimum point due to reverse mode conversion. The reflections of the higher symmetric incident modes S1 and S2 are also investigated. It turns out that S1 mode is an unusual mode which is nearly unaffected by the mode conversion in the Lamb wave edge reflection.

Younho Cho; Joseph L. Rose

1996-01-01T23:59:59.000Z

192

Higher mode stability in spheromak equilibria  

Science Journals Connector (OSTI)

Spheromak equilibria with current profiles varying from peaked to hollow are analyzed for higher mode stability using a linear magnetohydrodynamic(MHD) code. For a cylindrical flux conserver with a radius equal to length the n=2 m=2 mode is found to be marginally unstable for the same hollow current profile as the n=1 m=1 mode. While the growth rate for this n=2 mode is much lower than the n=1 mode the presence of the n=2 mode may explain experimentally observed relaxation phenomena involving short wavelength turbulence in spheromak equilibria with sufficiently hollow current profiles.

U. Shumlak; T. R. Jarboe

1999-01-01T23:59:59.000Z

193

NREL: Transmission Grid Integration - Wind Integration Datasets  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Integration Datasets The Wind Integration Datasets provide energy professionals with a consistent set of wind profiles for the eastern United States and the western United...

194

Computer system design description for SY-101 hydrogen mitigation test project data acquisition and control system (DACS-1)  

SciTech Connect

Description of the Proposed Activity/REPORTABLE OCCURRENCE or PIAB: This ECN changes the computer systems design description support document describing the computers system used to control, monitor and archive the processes and outputs associated with the Hydrogen Mitigation Test Pump installed in SY-101. There is no new activity or procedure associated with the updating of this reference document. The updating of this computer system design description maintains an agreed upon documentation program initiated within the test program and carried into operations at time of turnover to maintain configuration control as outlined by design authority practicing guidelines. There are no new credible failure modes associated with the updating of information in a support description document. The failure analysis of each change was reviewed at the time of implementation of the Systems Change Request for all the processes changed. This document simply provides a history of implementation and current system status.

Ermi, A.M.

1997-05-01T23:59:59.000Z

195

Integrated Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

Name Integrated Photovoltaics Name Integrated Photovoltaics Place Sunnyvale, California Product California-based stealth mode PV startup. Coordinates 32.780338°, -96.547405° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.780338,"lon":-96.547405,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

196

Block Cipher Modes Cetin Kaya Koc  

E-Print Network (OSTI)

Confidentiality Modes Five confidentiality modes: ECB, CBC, CFB, OFB, and CTR ECB: Electronic Codebook CBC: Cipher Block Chaining CFB: Cipher Feedback OFB: Output Feedback CTR: Counter Ko�c (http

197

Glass Rheology: From mode-coupling theory to a dynamical yield criterion  

E-Print Network (OSTI)

The mode coupling theory (MCT) of glasses, while offering an incomplete description of glass transition physics, represents the only established route to first-principles prediction of rheological behavior in nonergodic materials such as colloidal glasses. However, the constitutive equations derivable from MCT are somewhat intractable, hindering their practical use and also their interpretation. Here, we present a schematic (single-mode) MCT model which incorporates the tensorial structure of the full theory. Using it, we calculate the dynamic yield surface for a large class of flows.

J. M. Brader; Th. Voigtmann; M. Fuchs; R. G. Larson; M. E. Cates

2009-09-28T23:59:59.000Z

198

Twisted Electromagnetic Modes and Sagnac Ring-Lasers  

E-Print Network (OSTI)

A new approximation scheme, designed to solve the covariant Maxwell equations inside a rotating hollow slender conducting cavity (modelling a ring-laser), is constructed. It is shown that for well-defined conditions there exist TE and TM modes with respect to the longitudinal axis of the cavity. A twisted mode spectrum is found to depend on the integrated Frenet torsion of the cavity and this in turn may affect the Sagnac beat frequency induced by a non-zero rotation of the cavity. The analysis is motivated by attempts to use ring-lasers to measure terrestrial gravito-magnetism or the Lense-Thirring effect produced by the rotation of the Earth.

David A. Burton; Adam Noble; Robin W. Tucker; David L. Wiltshire

2004-11-08T23:59:59.000Z

199

CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF PROPOSED ACTION:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

'u ", lt~Fs::::N 'u ", lt~Fs::::N CATEGORICAL EXCLUSION (CX) DETERMINATION BRIEF DESCRIPTION OF PROPOSED ACTION: Southwestern Power Administration proposes to construct a maintenance garage for heavy vehicles and equipment at the Springfield, Missouri facility. PROPOSED BY: Southwestern Power Administration- U.S. Dept. of Energy DATE: December 7,2010 NUMBERS AND TITLES OF THE CATEGORICAL EXCLUSIONS BEING APPLIED: 10 CFR 1021, Appendix B to Subpart D, Part B1.15- Siting, construction or modification of support structures within or contiguous to an already developed area. REGULATORY REQUIREMENTS IN 10 CFR 1021.410(B): (1) The proposed action fits within a class of actions that is listed in Appendix A & B to Subpart D. For classes of action listed in Appendix A or B, the following conditions are integral elements, i.e., to fit within a class, the

200

Quantum-mechanical description of in-medium fragmentation  

E-Print Network (OSTI)

We present a quantum-mechanical description of quark-hadron fragmentation in a nuclear environment. It employs the path-integral formulation of quantum mechanics, which takes care of all phases and interferences, and which contains all relevant time scales, like production, coherence, formation, etc. The cross section includes the probability of pre-hadron (colorless dipole) production both inside and outside the medium. Moreover, it also includes inside-outside production, which is a typical quantum-mechanical interference effect (like twin-slit electron propagation). We observe a substantial suppression caused by the medium, even if the pre-hadron is produced outside the medium and no energy loss is involved. This important source of suppression is missed in the usual energy-loss scenario interpreting the effect of jet quenching observed in heavy ion collisions. This may be one of the reasons of a too large gluon density, reported by such analyzes.

B. Z. Kopeliovich; H. -J. Pirner; I. K. Potashnikova; Ivan Schmidt; A. V. Tarasov; O. O. Voskresenskaya

2008-09-27T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Frequenz, Vol. 65 (2011), pp. 287292 Copyright 2011 De Gruyter. DOI 10.1515/FREQ.2011.042 A Mode-matching Approach for the Analysis and Design  

E-Print Network (OSTI)

-matching Approach for the Analysis and Design of Substrate-integrated Waveguide Components Jens Bornemann,1 and accurate analysis of substrate-integrated wave-guide components with rectangular/square via holes. Models. An example of a four- pole dual-mode filter in substrate-integrated wave-guide technology illustrates

Bornemann, Jens

202

Optical waveguides having flattened high order modes  

DOE Patents (OSTI)

A deterministic methodology is provided for designing optical fibers that support field-flattened, ring-like higher order modes. The effective and group indices of its modes can be tuned by adjusting the widths of the guide's field-flattened layers or the average index of certain groups of layers. The approach outlined here provides a path to designing fibers that simultaneously have large mode areas and large separations between the propagation constants of its modes.

Messerly, Michael Joseph; Beach, Raymond John; Heebner, John Edward; Dawson, Jay Walter; Pax, Paul Henry

2014-08-05T23:59:59.000Z

203

Probing Emissions of Military Cargo Aircraft: Description of...  

NLE Websites -- All DOE Office Websites (Extended Search)

Emissions of Military Cargo Aircraft: Description of a Joint Field Measurement Strategic Environmental Research and Probing Emissions of Military Cargo Aircraft: Description of a...

204

Applicable EPA Regulations and Description Website | Open Energy...  

Open Energy Info (EERE)

Description Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Applicable EPA Regulations and Description Website Abstract This website provides...

205

Microsoft Word - 338M_Geothermal_Project_Descriptions | Department...  

Energy Savers (EERE)

Word - 338MGeothermalProjectDescriptions More Documents & Publications Microsoft Word - 564MBiomassProject Descriptions FINAL 120409 564MBiomassProjects.pdf Slide 1...

206

Vibration modes of giant gravitons  

Science Journals Connector (OSTI)

We examine the spectrum of small vibrations of giant gravitons when the gravitons expand in anti–de Sitter space and when they expand on the sphere. For any given angular harmonic, the modes are found to have frequencies related to the curvature length scale of the background; these frequencies are independent of radius (and hence angular momentum) of the brane itself. This implies that the holographic dual theory must have, in a given R charge sector, low-lying non-BPS excitations with level spacings independent of the R charge.

Sumit R. Das; Antal Jevicki; Samir D. Mathur

2000-12-21T23:59:59.000Z

207

Section C: Description, Specifications and Work Statements  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

promptly to DOE, and mitigates these matters to ensure that NREL's FFRDC integrity and brand are protected. (5) Environment, Safety, and Health Management - NREL creates and...

208

A Framework for Dynamic Resource Assignment and Scheduling on Reconfigurable Mixed-Mode On-Chip Multiprocessors  

E-Print Network (OSTI)

for HEterogeneous Reconfigurable Architecture. An application is represented by a novel mixed-mode task flow graph matrix-based algorithms where software programmability and standard FP representation are indispensable high-level descriptions, such as C/C++, Java and Matlab [e.g., 9-13], are emerging to deal

Ziavras, Sotirios G.

209

Tag-based Web Photo Retrieval Improved by Batch Mode Re-Tagging Lin Chen Dong Xu Ivor W. Tsang  

E-Print Network (OSTI)

Tag-based Web Photo Retrieval Improved by Batch Mode Re-Tagging Lin Chen Dong Xu Ivor W. Tsang Web photos in social media sharing websites such as Flickr are generally accompanied by rich but noisy textual descriptions (tags, captions, categories, etc.). In this pa- per, we proposed a tag-based photo

Tsang Wai Hung "Ivor"

210

NONLINEAR DEVELOPMENT OF THE R-MODE INSTABILITY AND THE MAXIMUM ROTATION RATE OF NEUTRON STARS  

SciTech Connect

We describe how the nonlinear development of the R-mode instability of neutron stars influences spin up to millisecond periods via accretion. When nearly resonant interactions of the l = m = 2 R-mode with pairs of 'daughter modes' are included, the R-mode saturates at the lowest amplitude which leads to significant excitation of a pair of modes. The lower bound for this threshold amplitude is proportional to the damping rate of the particular daughter modes that are excited parametrically. We show that if dissipation occurs in a very thin boundary layer at the crust-core boundary, the R-mode saturation amplitude is too large for angular momentum gain from accretion to overcome loss to gravitational radiation. We find that lower dissipation is required to explain spin up to frequencies much higher than 300 Hz. We conjecture that if the transition from the fluid core to the crystalline crust occurs over a distance much longer than 1 cm, then a sharp viscous boundary layer fails to form. In this case, damping is due to shear viscosity dissipation integrated over the entire star. We estimate the lowest parametric instability threshold from first principles. The resulting saturation amplitude is low enough to permit spin up to higher frequencies. The requirement to allow continued spin up imposes an upper bound to the frequencies attained via accretion that plausibly may be about 750 Hz. Within this framework, the R-mode is unstable for all millisecond pulsars, whether accreting or not.

Bondarescu, Ruxandra [Institute for Theoretical Physics, University of Zurich, CH-8057 Zurich (Switzerland); Wasserman, Ira, E-mail: ruxandra@physik.uzh.ch, E-mail: ira@astro.cornell.edu [Center for Radiophysics and Space Research, Cornell University, Ithaca, NY 14853 (United States)

2013-11-20T23:59:59.000Z

211

COMMON EXPENDITURE TYPES USED FOR PROPERTY AND EQUIPMENT "ET" Description Notes "ET" Description Notes  

E-Print Network (OSTI)

COMMON EXPENDITURE TYPES USED FOR PROPERTY AND EQUIPMENT "ET" Description Notes "ET" Description CAPITAL EXP SU OWNED ($5K AND GREATER) Useful Life 55136 SPEC PURPOSE DATA HOLDING (Note 3) lab eqpt POSTAGE AND SHIPPING 52077 SU PROCEEDS DISP CAP EQUIP (SALE) N/A 55310 POSTAGE stamps, fedex, etc CAPITAL

Straight, Aaron

212

Physics of vertically integrated waveguide photodetectors and amplifiers. Final report  

SciTech Connect

This report describes the efforts supported by LLNL under the Subcontract No. B239593 at the University of Arizona during the Fiscal Year 1992. A solid physical foundation has been developed for understanding the operation of vertically integrated photodetectors and amplifiers. This has been achieved through a combination of numerical simulation and development of simple coupled-mode theories. Coupled-mode theory has been used to elucidate the physics underlying the operation of vertically integrated photodetectors. In particular, the relation between the spatial transients observed in experiments and numerical simulations, and the non-power orthogonality of the underlying modes has been clarified. The coupled-mode theory has been extended to the case of coupled waveguide-amplifiers.

Wright, E.M. [Univ. of Arizona, Tucson, AZ (United States). Optical Sciences Center

1993-11-01T23:59:59.000Z

213

Student Safety 2011 [Compatibility Mode]  

NLE Websites -- All DOE Office Websites (Extended Search)

Student Safety Student Safety Orientation Safety & Health Services Division June 2011 Safety Matters at BNL "Safety: We maintain a safe workplace and we plan our work and perform it safely. We take responsibility for take responsibility for the safety of ourselves, coworkers and guests." Safety Makes Science Possible! Be Safety Conscious Check for postings before entering areas Have a questioning attitude about things you do not understand. Be aware and cognizant of your surroundings. Watch out for one another-sometimes a second Watch out for one another-sometimes a second eye can avoid injury to a co-worker. Date of Incident Department Incident Description Incident Type 07/30/10 Office of Educational Programs A visiting student's finger was lacerated by a beaker in a lab.

214

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Technology Description Property Type Text Pages using the property "Technology Description" Showing 25 pages using this property. (previous 25) (next 25) M MHK Technologies/14 MW OTECPOWER + MINIMIZE SURFACE ACTIVITIES TO REDUCE THE CAPITAL COST AND TO IMPROVE EFFICIENCY ALTERNATE WORKING FLUIDS ARE USED FOR ENHANCED POWER EFFICIENCY IN OPTEC POWER HYBRID CYCLES ARE USED TO IMPROVE POWER AND NEED WITH SUBSEA HEAT EXCHANGERS ADVANCED SUPPORTING VESSEL CONCEPT AND FREE STANDING RISER TECHNOLOGIES TO WITH STAND HARSH OCEAN ENVIRONMENT IN DEEPWATER HAD BEEN DEVELOPED FOR THIS OPTEC POWER IT IS THE ONLY RELIABLE AND PROFITABLE RENEWABLE ENERGY SOURCE FOR THE NEED OF WORLD ENERGY FOR THE NEXT DECADE DESALINATION AND HDROGEN PRODUCTION ARE LINKED TO THE POWER GENERATION OF THE OTEC POWER FOR SEVERAL BY PRODUCTS COST EFFECTIVE PRODUCTION CLEAN ENERGY AND CLEAN WATER IS THE GOAL OF OTECPOWER INC OUR 14 MW OTEC POWER COSTS 50 MILLION USD ALL EQUIPMENT HAD BEEN DESINGED AND A FEW OF THEM ARE TESTED FOR OIL AND GAS INDUSTRY APPLICATION WHICHA RE BEING USED FOR OTECPOWER A RELIABLE AND FEASIBLE OTECPOWER IS PROPOSED

215

COMMUNITY ADVISOR JOB DESCRIPTION General Statement  

E-Print Network (OSTI)

COMMUNITY ADVISOR JOB DESCRIPTION General Statement Community Advisors are members for their area and the Head Resident. Community Advisors are responsible for meeting the needs of their woodframe is beyond a Community Advisor's level of comfort and competence and refer students to as many resources

Royer, Dana

216

Resident Advisor Position Description Occupational Summary  

E-Print Network (OSTI)

Resident Advisor Position Description Occupational Summary The Resident Advisor (RA) is assigned and Residence Hall policies. The Resident Advisor provides programming based on an assessment of the community and individual needs. The responsibilities of the Resident Advisor position are implemented under the supervision

Bogaerts, Steven

217

Community Advisor Position Description Occupational Summary  

E-Print Network (OSTI)

Community Advisor Position Description Occupational Summary The Community Advisor (CA) is a full success; personal growth; and responsible citizenship. Terms of Appointment The Community Advisor position Monday, May 12, 2014 (5:00pm). Eligibility The Community Advisor must be a full-time student

Bogaerts, Steven

218

Video/Photography Peer Helper Position Description  

E-Print Network (OSTI)

Video/Photography Peer Helper Position Description Position Title: Video/Photography Peer Helper As the video/photography peer helper, you will use your creative genius to chronicle and share the University of Calgary student experience using video, photography or a combination of both. This role provides

de Leon, Alex R.

219

TOPICS IN CLIMATE RESEARCH Course Description  

E-Print Network (OSTI)

Projects 6 Climate Theory; Climate Forcing; Climate Feedbacks I 4 7 Climate Theory; Climate ForcingTOPICS IN CLIMATE RESEARCH AT 755 Course Description: This course is a survey of current topics in climate research, including the decadal to paleoclimate observational record, the impacts of climate

220

MATLAB Quick Guide Name Description Example  

E-Print Network (OSTI)

MATLAB Quick Guide Symbol/ Command Name Description Example help help Help menu for any command or symbol in MATLAB Help : Help sum % comment MATLAB comment symbol; MATLAB will skip any line beginning for multiplication a = 5 * 5 ; / divide Symbol for division b = 5 / 1 ; ; semi-colon (1) Tells MATLAB to suppress

Smith-Konter, Bridget

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Description of PDE Models in Modelica  

Science Journals Connector (OSTI)

Modelica is a new object-oriented language for modeling of large, complex, and heterogeneous physical systems. It is designed to allow for convenient and efficient modeling and simulation of the differential-algebraic equations (DAEs) systems. However, ... Keywords: Modelica, PDE, Description

Zhihua Li; Huili Zhang; Ling Zheng

2008-12-01T23:59:59.000Z

222

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network (OSTI)

DESCRIPTION DETAILS * Radioactive Waste Source Reduction 1,500 Radioactive Waste $6,000 $2,500 $6,000 Waste Yard Sorting Table surveying to sort clean waste from radioactive waste Radioactive Emissions Emission lives. Radioactive Waste generated through wet chemistry Waste Minimization 30 Mixed waste / Liquid

223

Course Description Grid Computing, NGSSC, 2p  

E-Print Network (OSTI)

#12;­ Grid security: Grid security demands and solutions for, e.g., authen- tication, authorityCourse Description Grid Computing, NGSSC, 2p Erik Elmroth, Olle Mulmo, and Leif Nixon February 14, 2003 General information This course is designed to give a broad overview of the concept of grid comput

Elmroth, Erik

224

Requested Amount: $7 million annually PROGRAM DESCRIPTION  

E-Print Network (OSTI)

Requested Amount: $7 million annually PROGRAM DESCRIPTION Goals are to increase the level of fire protection to the citizens of Texas and to decrease the level of losses (in lives and property) from wildfires, thereby enhancing the quality of life for Texans. The Texas Wildfire Protection Plan (TWPP

225

EES 110: Earth Systems Course Description  

E-Print Network (OSTI)

of energy come from? The course includes laboratory exercises that cover map reading skills, rockEES 110: Earth Systems Course Description: This course examines some of the basic processes (held during normal laboratory meeting times): 1. Rocks & Minerals of Upstate SC: A chance to explore

226

Automatic TLI recognition system, general description  

SciTech Connect

This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.

Lassahn, G.D.

1997-02-01T23:59:59.000Z

227

The Ideal Transformer Description and Circuit Symbol  

E-Print Network (OSTI)

The Ideal Transformer Description and Circuit Symbol As with all the other circuit elements, there is a physical transformer commonly used in circuits whose behavior can be discussed in great detail. However, in many cases the practical transformer can be adequately approximated by the "ideal transformer," which

King, Roger

228

Sustainable Energy Scheme Mentor Job description  

E-Print Network (OSTI)

1 Sustainable Energy Scheme Mentor Job description Department: Student Administration and Registry and Outreach Team Job title: Engineering Scheme Mentor Responsible to: UK Student Recruitment and Outreach Team and agreement between the Sustainable Energy Scheme Mentor and the UK Student Recruitment and Outreach Team

Anderson, Jim

229

Career Tracks Job Family Descriptions FIELD: COMMUNICATIONS  

E-Print Network (OSTI)

, is paramount. Includes website development, or producing communications or instruction using the web, audio. #12;23/1/2012 Career Tracks Job Family Descriptions FIELD: ENGINEERING Aerospace Engineering Involves engineering design and development of aerospace systems including scientific instruments for spacecraft

Westerling, Anthony L.

230

EGGN 100 -INTRODUCTION TO ENGINEERING COURSE DESCRIPTION  

E-Print Network (OSTI)

: Design and implementation of low-power adjustable audio amplifier circuit** Week 8 Electrical Engineering Engineering project: Design and implementation of a low-power adjustable audio amplifier circuit StudentsEGGN 100 - INTRODUCTION TO ENGINEERING COURSE DESCRIPTION Introduction to engineering disciplines

de Lijser, Peter

231

Position Description Website and Video Coordinator  

E-Print Network (OSTI)

, feature content that supports the School's mission and employs best practices (i.e. chunking content, short pages, bulleted list, etc.); follow best practices with search engine optimization; creating clearPosition Description Website and Video Coordinator School of Global Environmental Sustainability

Barnes, Elizabeth A.

232

System design description cone penetrometer system  

SciTech Connect

The system design description documents in detail the design of the cone penetrometer system. The systems includes the cone penetrometer physical package, raman spectroscopy package and moisture sensor package. Information pertinent to the system design, development, fabrication and testing is provided.

Seda, R.Y., Westinghouse Hanford

1996-08-12T23:59:59.000Z

233

Development of the iPOINT Testbed for Optoelectronic Asynchronous Transfer Mode Networking  

E-Print Network (OSTI)

Development of the iPOINT Testbed for Optoelectronic Asynchronous Transfer Mode Networking Abstract. In conjunction of the UIUC microelectronics laboratory, low-cost optoelectronic components have been developed the integration of time-division multiplexors, ATM switches, optoelectronic components, and ber-optics. As shown

Lockwood, John W.

234

Standard-C hydrogen monitoring system, system design description  

SciTech Connect

Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

Schneider, T.C., Westinghouse Hanford

1996-08-29T23:59:59.000Z

235

Representation of Ideal Magnetohydrodynamic Modes  

SciTech Connect

One of the most fundamental properties of ideal magnetohydrodynamics is the condition that plasma motion cannot change magnetic topology. The conventional representation of ideal magnetohydrodynamic modes by perturbing a toroidal equilibrium field through ? ? = ? X (xi X B) ensures that ? B • ? ? = 0 at a resonance, with ? labelling an equilibrium flux surface. Also useful for the analysis of guiding center orbits in a perturbed field is the representation ? ? = ? X ?B. These two representations are equivalent, but the vanishing of ? B • ?? at a resonance is necessary but not sufficient for the preservation of field line topology, and a indiscriminate use of either perturbation in fact destroys the original equilibrium flux topology. It is necessary to find the perturbed field to all orders in xi to conserve the original topology. The effect of using linearized perturbations on stability and growth rate calculations is discussed

Roscoe B. White

2013-01-15T23:59:59.000Z

236

2014 SunShot Initiative Portfolio Book: Systems Integration  

Energy.gov (U.S. Department of Energy (DOE))

The 2014 SunShot Initiative Portfolio Book outlines the progress towards the goals outlined in the SunShot Vision Study. Contents include overviews of each of SunShot’s five subprogram areas, as well as a description of every active project in the SunShot’s project portfolio as of May 2014. This section includes a letter from Program Manager Dr. Ranga Pitchumani providing an overview of SunShot’s work in the systems integration subprogram, as well as a description of every active systems integration project in the portfolio.

237

Prufer Transformations for the Normal Modes in Ocean Acoustics  

SciTech Connect

In 1926 Prufer introduced a method of transforming the second order Sturm-Liouville (SL) equation into two nonlinear first order differential equations for the phase oe and ''magnitude'', |oe{sup 2}+oe{sup 2}| for a Poincare phase space representation, (oe,oe). The useful property is the phase equation decouples from the magnitude one which leads to a nonlinear, two point boundary value problem for the eigenvalues, or SL numbers. The transformation has been used both theoretically, e.g. Atkinson, [1960] to prove certain properties of SL equations as well as numerically e.g Bailey [1978]. This paper examines the utility of the Prufer transformation in the context of numerical solutions for modes of the ocean acoustic wave equation. (Its use is certainly not well known in the ocean acoustics community.) Equations for the phase, oe, and natural logarithm of the ''magnitude'', ln(|oe{sup 2}+oe{sup 2}|) lead to same decoupling and a fast and efficient numerical solution with the SL eigenvalues mapping to the horizontal wavenubers. The Prufer transformation has stabilty problems for low order modes at high frequecies, so a numerically stable method of integrating the phase equation is derived. This seems to be the first time the these stability issues have been highlighted to provide a robust algorthim for the modes.

Baggeroer, Arthur B. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States)

2010-09-06T23:59:59.000Z

238

Description & Careers Marketing is the management process through which goods and services move from concept to the customer. Whether it  

E-Print Network (OSTI)

Description & Careers The Field Marketing is the management process through which goods and services move from concept to the customer. Whether it is communicating offline or online, marketing is an integral part of business. Career opportunities in marketing are quite extensive and diversified. Many

Lin, Xiaodong

239

Stochastic semi-classical description of fusion at near-barrier energies  

SciTech Connect

Fusion reactions of heavy ions are investigated by employing a simple stochastic semi-classical model, which includes coupling between the relative motion and low frequency collective surface modes of colliding ions similarly to the quantal coupled-channels description. The quantal effect enters into the calculation through the initial zero-point fluctuations of the surface vibrations. A good agreement with results of coupled-channels calculations as well as experimental data is obtained for fusion cross sections of Ni isotopes. The internal excitations in nonfusing events as well as the fusion time are investigated.

Ayik, Sakir [Physics Department, Tennessee Technological University, Cookville, Tennessee 38505 (United States); Yilmaz, Bulent [Physics Department, Ankara University, TR-06100 Ankara (Turkey); Grand Accelerateur National d'Ions Lourds (GANIL), CEA/DSM-CNRS/IN2P3, BP 55027, F-14076 Caen Cedex 5 (France); Lacroix, Denis [Grand Accelerateur National d'Ions Lourds (GANIL), CEA/DSM-CNRS/IN2P3, BP 55027, F-14076 Caen Cedex 5 (France)

2010-03-15T23:59:59.000Z

240

Graphene sustained nonlinear modes in dielectric waveguides  

Science Journals Connector (OSTI)

We discuss the existence of nonlinear modes sustained by graphene layers in dielectric waveguides. Taking advantage of the almost two dimensional nature of graphene, we introduce the...

Auditore, Aldo; De Angelis, Costantino; Locatelli, Andrea; Boscolo, Stefano; Midrio, Michele; Romagnoli, Marco; Capobianco, Antonio-Daniele; Nalesso, Gianfranco

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

FMEA (Failure Mode and Effects Analysis)  

Science Journals Connector (OSTI)

FMEA (Failure Mode and Effects Analysis; Fehlermöglichkeits- und Einflussanalyse) als universelles Methodenmodell folgt dem Grundgedanken einer präventiven Fehlervermeidung anstelle einer nachsorgenden Fehler...

A. Göbel

2014-01-01T23:59:59.000Z

242

Thermal Control & System Integration  

Energy.gov (U.S. Department of Energy (DOE))

The thermal control and system integration activity focuses on issues such as the integration of motor and power control technologies and the development of advanced thermal control technologies....

243

Distribution Grid Integration  

Energy.gov (U.S. Department of Energy (DOE))

The DOE Systems Integration team funds distribution grid integration research and development (R&D) activities to address the technical issues that surround distribution grid planning,...

244

Description of Energy Intensity Tables (12)  

U.S. Energy Information Administration (EIA) Indexed Site

3. Description of Energy Intensity Data Tables 3. Description of Energy Intensity Data Tables There are 12 data tables used as references for this report. Specifically, these tables are categorized as tables 1 and 2 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1985, 1988, 1991, and 1994; along with the percentage changes between 1985 and the three subsequent years (1988, 1991, and 1994) tables 3 and 4 present 1988, 1991, and 1994 energy-intensity ratios that have been adjusted to the mix of products shipped from manufacturing establishments in 1985 tables 5 and 6 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1988, 1991, and 1994; along with the percentage changes between 1988 and the two subsequent

245

A description and assessment of heliostat technology  

SciTech Connect

This report summarizes heliostat development through 1986 by the Department of Energy's Solar Thermal Central Receiver Program. It has been prepared to provide potential users and developers of Central Receiver Systems with an assessment and overview of the technology. The topics covered are design descriptions, cost information, operation, maintenance, reliability, cleaning, beam safety, evaluation instrumentation, materials, and future research and development recommendations. 169 refs., 69 figs., 36 tabs.

Mavis, C.L.

1989-01-01T23:59:59.000Z

246

Evaluation of on-chip integration of magneto-optic isolators  

E-Print Network (OSTI)

The recent development of on chip integration of magneto-optic isolators is reviewed. Two major categories of structural designs for waveguide isolator (nonreciprocal mode conversion and nonreciprocal phase shift) have ...

Chen, Xiaoyan, M. Eng. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

247

Mode I - mode II delamination fractrue toughness of a unidirectional graphite/epoxy composite  

E-Print Network (OSTI)

MODE I - MODE II DELAMINATION FRACTURE TOUGHNESS OF A UNIDIRECTIONAL GRAPHITE/EPOXY COMPOSITE A Thesis by PETER STEPHEN VANDERKLEY Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE Demember 1981 Najor Subject: Mechanical Engineering MODE I - MODE II DELAMINATION FRACTURE TOUGHNESS OF A UNIDIRECTIONAL GRAPHITE/EPOXY COMPOSITE A Thesis by PETER STEPHEN VANDERKLEY Approved as to style and content by...

Vanderkley, Peter Stephen

2012-06-07T23:59:59.000Z

248

HQ State HQ City Primary Awardee Brief Project Description Project Locations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Primary Awardee Primary Awardee Brief Project Description Project Locations Recovery Act Funding* Participant Share Total Project Value Including Cost Share Los Angeles Los Angeles Department of Water and Power Implement a smart grid demonstration at university campus properties and technology transfer laboratories to establish a fully-integrated Smart Grid system and suite of technologies as applied to demand response, conduct a comprehensive portfolio of behavioral studies, demonstrate next- generation cyber security technologies, and demonstrate the integration of substantial number of PHEVs into Smart Grid. Los Angeles, CA $60,280,000 $60,280,000 $120,560,000 Rosemead Southern California Edison Company Demonstrate an integrated, scalable model of a Smart Grid System from transmission through

249

Residential Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE))

Residential Buildings Integration Program Presentation for the 2013 Building Technologies Office's Program Peer Review

250

INTEGRATED FISCHER TROPSCH MODULAR PROCESS MODEL  

SciTech Connect

With declining petroleum reserves, increased world demand, and unstable politics in some of the world’s richest oil producing regions, the capability for the U.S. to produce synthetic liquid fuels from domestic resources is critical to national security and economic stability. Coal, biomass and other carbonaceous materials can be converted to liquid fuels using several conversion processes. The leading candidate for large-scale conversion of coal to liquid fuels is the Fischer Tropsch (FT) process. Process configuration, component selection, and performance are interrelated and dependent on feed characteristics. This paper outlines a flexible modular approach to model an integrated FT process that utilizes a library of key component models, supporting kinetic data and materials and transport properties allowing rapid development of custom integrated plant models. The modular construction will permit rapid assessment of alternative designs and feed stocks. The modeling approach consists of three thrust areas, or “strands” – model/module development, integration of the model elements into an end to end integrated system model, and utilization of the model for plant design. Strand 1, model/module development, entails identifying, developing, and assembling a library of codes, user blocks, and data for FT process unit operations for a custom feedstock and plant description. Strand 2, integration development, provides the framework for linking these component and subsystem models to form an integrated FT plant simulation. Strand 3, plant design, includes testing and validation of the comprehensive model and performing design evaluation analyses.

Donna Post Guillen; Richard Boardman; Anastasia M. Gribik; Rick A. Wood; Robert A. Carrington

2007-12-01T23:59:59.000Z

251

Integrated Modeling and Design of Nonlinear Control Systems  

E-Print Network (OSTI)

Integrated Modeling and Design of Nonlinear Control Systems Gilmer L. Blankenship Harry G. Kwatny building, simulation, control system design and real time implementation. Software Environment Overview: A summary description of a symbolic computing environment for nonlinear control system design is provided

Kwatny, Harry G.

252

Data integration driven ontology design, case study smart city  

Science Journals Connector (OSTI)

Methods to design of formal ontologies have been in focus of research since the early nineties when their importance and conceivable practical application in engineering sciences had been understood. However, often significant customization of generic ... Keywords: DL-lite family, data integration, description logic, ontology design, ontology mapping, semantic web

German Nemirovski; Andreas Nolle; Álvaro Sicilia; Ilaria Ballarini; Vincenzo Corado

2013-06-01T23:59:59.000Z

253

Design of globally optimal multiple description scalar quantizers  

E-Print Network (OSTI)

This thesis investigates the design of globally optimal multiple description scalar quantizers. The design of multiple description scalar quantizers is formulated as a combinatorial optimization problem due to the index assignment issue. The first...

Desilva, Buveneka Kanishka

2012-06-07T23:59:59.000Z

254

Position Description Position Title: Sustainability Student Club Alliance Facilitator  

E-Print Network (OSTI)

Position Description Position Title: Sustainability Student Club Alliance Facilitator Department/volunteer opportunity for University of Calgary students. POSITION DESCRIPTION The Alliance Facilitator is responsible for coordinating and facilitating the monthly meetings of the Sustainability Student Club Alliance. The Alliance

de Leon, Alex R.

255

STEP Energy Coach and Technical Consultant Job Descriptions  

Energy.gov (U.S. Department of Energy (DOE))

STEP Energy Coach and Technical Consultant Job Descriptions, from the Tool Kit Framework: Small Town University Energy Program (STEP).

256

Guiding Center Equations for Ideal Magnetohydrodynamic Modes  

SciTech Connect

Guiding center simulations are routinely used for the discovery of mode-particle resonances in tokamaks, for both resistive and ideal instabilities and to find modifications of particle distributions caused by a given spectrum of modes, including large scale avalanches during events with a number of large amplitude modes. One of the most fundamental properties of ideal magnetohydrodynamics is the condition that plasma motion cannot change magnetic topology. The conventional representation of ideal magnetohydrodynamic modes by perturbing a toroidal equilibrium field through ?~B = ? X (? X B) however perturbs the magnetic topology, introducing extraneous magnetic islands in the field. A proper treatment of an ideal perturbation involves a full Lagrangian displacement of the field due to the perturbation and conserves magnetic topology as it should. In order to examine the effect of ideal magnetohydrodynamic modes on particle trajectories the guiding center equations should include a correct Lagrangian treatment. Guiding center equations for an ideal displacement ? are derived which perserve the magnetic topology and are used to examine mode particle resonances in toroidal confinement devices. These simulations are compared to others which are identical in all respects except that they use the linear representation for the field. Unlike the case for the magnetic field, the use of the linear field perturbation in the guiding center equations does not result in extraneous mode particle resonances.

Roscoe B. White

2013-02-21T23:59:59.000Z

257

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker  

E-Print Network (OSTI)

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

Khedker, Uday

258

COG Software Architecture Design Description Document  

SciTech Connect

This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

Buck, R M; Lent, E M

2009-09-21T23:59:59.000Z

259

Mixed Mode Fuel Injector And Injection System  

DOE Patents (OSTI)

A fuel injector includes a homogenous charge nozzle outlet set and a conventional nozzle outlet set that are controlled respectively by first and second three way needle control valves. Each fuel injector includes first and second concentric needle valve members. One of the needle valve members moves to an open position for a homogenous charge injection event, while the other needle valve member moves to an open position for a conventional injection event. The fuel injector has the ability to operate in a homogenous charge mode with a homogenous charge spray pattern, a conventional mode with a conventional spray pattern or a mixed mode.

Stewart, Chris Lee (Normal, IL); Tian, Ye (Bloomington, IL); Wang, Lifeng (Normal, IL); Shafer, Scott F. (Morton, IL)

2005-12-27T23:59:59.000Z

260

Final report on LDRD project :leaky-mode VCSELs for photonic logic circuits.  

SciTech Connect

This report describes the research accomplishments achieved under the LDRD Project ''Leaky-mode VCSELs for photonic logic circuits''. Leaky-mode vertical-cavity surface-emitting lasers (VCSELs) offer new possibilities for integration of microcavity lasers to create optical microsystems. A leaky-mode VCSEL output-couples light laterally, in the plane of the semiconductor wafer, which allows the light to interact with adjacent lasers, modulators, and detectors on the same wafer. The fabrication of leaky-mode VCSELs based on effective index modification was proposed and demonstrated at Sandia in 1999 but was not adequately developed for use in applications. The aim of this LDRD has been to advance the design and fabrication of leaky-mode VCSELs to the point where initial applications can be attempted. In the first and second years of this LDRD we concentrated on overcoming previous difficulties in the epitaxial growth and fabrication of these advanced VCSELs. In the third year, we focused on applications of leaky-mode VCSELs, such as all-optical processing circuits based on gain quenching.

Hargett, Terry W.; Hadley, G. Ronald; Serkland, Darwin Keith; Blansett, Ethan L.; Geib, Kent Martin; Sullivan, Charles Thomas; Keeler, Gordon Arthur; Bauer, Thomas; Ongstand, Andrea; Medrano, Melissa R.; Peake, Gregory Merwin; Montano, Victoria A.

2005-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Analysis of coal-firing modes shows pulverized least costly  

SciTech Connect

A plant owner opting to build a new coal-fired facility has several processes from which to choose. Among the most common are the spreader-stoker- and the pulverized-coal-fired boiler. Since pollution control is now an integral part of any coal-fired operation, fluidized-bed combustion (FBC) is becoming increasingly popular. Reason: This process does not require auxiliary equipment to control SO/sub 2/. Comparing the operation and economics of four coal-burning processes can help make this selection a somewhat easier one. This analysis examines four types of combustion: spreader stoker, pulverized coal, bubbling fluidized bed, and circulating fluidized bed. The descriptions are for a 200,000-lb/hr unit operating under like conditions.

Lutwen, R.C.; Fitzpatrick, T.J.

1986-04-01T23:59:59.000Z

262

Buried waste integrated demonstration technology integration process  

SciTech Connect

A Technology integration Process was developed for the Idaho National Energy Laboratories (INEL) Buried Waste Integrated Demonstration (BWID) Program to facilitate the transfer of technology and knowledge from industry, universities, and other Federal agencies into the BWID; to successfully transfer demonstrated technology and knowledge from the BWID to industry, universities, and other Federal agencies; and to share demonstrated technologies and knowledge between Integrated Demonstrations and other Department of Energy (DOE) spread throughout the DOE Complex. This document also details specific methods and tools for integrating and transferring technologies into or out of the BWID program. The document provides background on the BWID program and technology development needs, demonstrates the direction of technology transfer, illustrates current processes for this transfer, and lists points of contact for prospective participants in the BWID technology transfer efforts. The Technology Integration Process was prepared to ensure compliance with the requirements of DOE`s Office of Technology Development (OTD).

Ferguson, J.S.; Ferguson, J.E.

1992-04-01T23:59:59.000Z

263

Buried waste integrated demonstration technology integration process  

SciTech Connect

A Technology integration Process was developed for the Idaho National Energy Laboratories (INEL) Buried Waste Integrated Demonstration (BWID) Program to facilitate the transfer of technology and knowledge from industry, universities, and other Federal agencies into the BWID; to successfully transfer demonstrated technology and knowledge from the BWID to industry, universities, and other Federal agencies; and to share demonstrated technologies and knowledge between Integrated Demonstrations and other Department of Energy (DOE) spread throughout the DOE Complex. This document also details specific methods and tools for integrating and transferring technologies into or out of the BWID program. The document provides background on the BWID program and technology development needs, demonstrates the direction of technology transfer, illustrates current processes for this transfer, and lists points of contact for prospective participants in the BWID technology transfer efforts. The Technology Integration Process was prepared to ensure compliance with the requirements of DOE's Office of Technology Development (OTD).

Ferguson, J.S.; Ferguson, J.E.

1992-04-01T23:59:59.000Z

264

Energy Systems Integration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Systems Integration Systems Integration Ben Kroposki, PhD, PE Director, Energy Systems Integration National Renewable Energy Laboratory 2 Reducing investment risk and optimizing systems in a rapidly changing energy world * Increasing penetration of variable RE in grid * Increasing ultra high energy efficiency buildings and controllable loads * New data, information, communications and controls * Electrification of transportation and alternative fuels * Integrating energy storage (stationary and mobile) and thermal storage * Interactions between electricity/thermal/fuels/data pathways * Increasing system flexibility and intelligence Current Energy Systems Future Energy Systems Why Energy Systems Integration? 3 Energy Systems Integration Continuum Scale Appliance (Plug)

265

Acoustic energy dissipation and thermalization in carbon nanotubes: Atomistic modeling and mesoscopic description  

Science Journals Connector (OSTI)

The exchange of energy between low-frequency mechanical oscillations and high-frequency vibrational modes in carbon nanotubes (CNTs) is a process that plays an important role in a range of dynamic phenomena involving the dissipation of mechanical energy in both individual CNTs and CNT-based materials. The rates and channels through which acoustic energy deposited instantaneously in individual CNTs is dissipated are investigated in a series of atomistic molecular dynamics simulations. Several distinct regimes of energy dissipation, dependent on the initial stretching or bending deformations, are established. The onset of axial or bending buckling marks the transition from a regime of slow thermalization to a regime in which the energy associated with longitudinal and bending oscillations is rapidly damped. In the case of stretching vibrations, an intermediate regime is revealed in which dynamic coupling between longitudinal vibrational modes and the radial “squash” mode causes delayed axial buckling followed by a rapid transfer of energy to high-frequency vibrations. The results of the atomistic simulations are used in the design and parameterization of a “heat bath” description of thermal energy in a mesoscopic model, which is capable of simulating systems consisting of thousands of interacting CNTs. Two complementary methods for the description of mechanical energy dissipation in the mesoscopic model are developed. The relatively slow dissipation of acoustic vibrations in the absence of buckling is described by adding a damping force to the equations of motion of the dynamic elements of the mesoscopic model. The sharp increase in the energy dissipation rate at the onset of buckling is reproduced by incorporating a hysteresis loop into the strain energy that accounts for localized thermalization in the vicinity of buckling kinks. The ability of the mesoscopic model to reproduce the complex multistep processes of acoustic energy dissipation predicted by the atomistic simulations is demonstrated in mesoscopic simulations of free stretching and bending vibrations of individual CNTs.

William M. Jacobs; David A. Nicholson; Hagit Zemer; Alexey N. Volkov; Leonid V. Zhigilei

2012-10-09T23:59:59.000Z

266

Electric Markets Technical Assistance Program: FY1999 Grant Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FY1999 Grant FY1999 Grant Descriptions and Contact Information Electric Markets Technical Assistance Program: FY1999 Grant Descriptions and Contact Information Public Benefits and Distributed Generation Outreach Project The National Association of Regulatory Utility Commissioners (NARUC) will hold collaborative workshops with key stakeholders to build consensus on effective policy options for emerging competitive distributed generation markets. FY1999 Grant Descriptions and Contact Information More Documents & Publications Electric Restructuring Outreach Activities and Information Dissemination to State Public Utility Regulators Electric Markets Technical Assistance Program: FY2001 Grant Descriptions and Contact Information Electric Markets Technical Assistance Program: FY2003 Grant Descriptions

267

Differential rotation of nonlinear r-modes  

Science Journals Connector (OSTI)

The differential rotation of r-modes is investigated within the nonlinear theory up to second order in the mode amplitude in the case of a slowly rotating, Newtonian, barotropic, perfect-fluid star. We find a nonlinear extension of the linear r-mode, which represents differential rotation that produces large scale drifts of fluid elements along stellar latitudes. This solution includes a piece induced by first-order quantities and another one that is a pure second-order effect. Since the latter is stratified on cylinders, it cannot cancel differential rotation induced by first-order quantities, which is not stratified on cylinders. It is shown that, unlike the situation in the linearized theory, r-modes do not preserve the vorticity of fluid elements at second order. It is also shown that the physical angular momentum and energy of the perturbation are, in general, different from the corresponding canonical quantities.

Paulo M. Sá

2004-04-02T23:59:59.000Z

268

PLASTIC DEFORMATIONPLASTIC DEFORMATION Modes of Deformation  

E-Print Network (OSTI)

PLASTIC DEFORMATIONPLASTIC DEFORMATION Modes of Deformation The Uniaxial Tension Test Mechanisms underlying Plastic Deformation Strengthening mechanisms Mechanical Metallurgy George E Dieter McClick here to know about all the mechanisms by which materials fail #12;Slip (Dislocation motion) Plastic

Subramaniam, Anandh

269

Whispering-gallery-mode-based seismometer  

SciTech Connect

A whispering-gallery-mode-based seismometer provides for receiving laser light into an optical fiber, operatively coupling the laser light from the optical fiber into a whispering-gallery-mode-based optical resonator, operatively coupling a spring of a spring-mass assembly to a housing structure; and locating the whispering-gallery-mode-based optical resonator between the spring-mass assembly and the housing structure so as to provide for compressing the whispering-gallery-mode-based optical resonator between the spring-mass assembly and the housing structure responsive to a dynamic compression force from the spring-mass assembly responsive to a motion of the housing structure relative to an inertial frame of reference.

Fourguette, Dominique Claire; Otugen, M Volkan; Larocque, Liane Marie; Ritter, Greg Aan; Meeusen, Jason Jeffrey; Ioppolo, Tindaro

2014-06-03T23:59:59.000Z

270

Rotary Mode Core Sample System availability improvement  

SciTech Connect

The Rotary Mode Core Sample System (RMCSS) is used to obtain stratified samples of the waste deposits in single-shell and double-shell waste tanks at the Hanford Site. The samples are used to characterize the waste in support of ongoing and future waste remediation efforts. Four sampling trucks have been developed to obtain these samples. Truck I was the first in operation and is currently being used to obtain samples where the push mode is appropriate (i.e., no rotation of drill). Truck 2 is similar to truck 1, except for added safety features, and is in operation to obtain samples using either a push mode or rotary drill mode. Trucks 3 and 4 are now being fabricated to be essentially identical to truck 2.

Jenkins, W.W.; Bennett, K.L.; Potter, J.D. [Westinghouse Hanford Co., Richland, WA (United States); Cross, B.T.; Burkes, J.M.; Rogers, A.C. [Southwest Research Institute (United States)

1995-02-28T23:59:59.000Z

271

Two-Mode Theory of BEC Interferometry  

E-Print Network (OSTI)

A theory of BEC interferometry in an unsymmetrical double-well trap has been developed for small boson numbers, based on the two-mode approximation. The bosons are initially in the lowest mode of a single well trap, which is split into a double well and then recombined. Possible fragmentations into separate BEC states in each well during the splitting/recombination process are allowed for. The BEC is treated as a giant spin system, the fragmented states are eigenstates of S^2 and Sz. Self-consistent sets of equations for the amplitudes of the fragmented states and for the two single boson mode functions are obtained. The latter are coupled Gross-Pitaevskii equations. Interferometric effects may be measured via boson numbers in the first excited mode

B J Dalton

2007-02-03T23:59:59.000Z

272

Security technologies and protocols for Asynchronous Transfer Mode networks  

SciTech Connect

Asynchronous Transfer Mode (ATM) is a new data communications technology that promises to integrate voice, video, and data traffic into a common network infrastructure. In order to fully utilize ATM`s ability to transfer real-time data at high rates, applications will start to access the ATM layer directly. As a result of this trend, security mechanisms at the ATM layer will be required. A number of research programs are currently in progress which seek to better understand the unique issues associated with ATM security. This paper describes some of these issues, and the approaches taken by various organizations in the design of ATM layer security mechanisms. Efforts within the ATM Forum to address the user communities need for ATM security are also described.

Tarman, T.D.

1996-06-01T23:59:59.000Z

273

Influence of heavy modes on perturbations in multiple field inflation  

SciTech Connect

We investigate linear cosmological perturbations in multiple field inflationary models where some of the directions are light while others are heavy (with respect to the Hubble parameter). By integrating out the massive degrees of freedom, we determine the multi-dimensional effective theory for the light degrees of freedom and give explicitly the propagation matrix that replaces the effective sound speed of the one-dimensional case. We then examine in detail the consequences of a sudden turn along the inflationary trajectory, in particular the possible breakdown of the low energy effective theory in case the heavy modes are excited. Resorting to a new basis in field space, instead of the usual adiabatic/entropic basis, we study the evolution of the perturbations during the turn. In particular, we compute the power spectrum and compare with the result obtained from the low energy effective theory.

Gao, Xian; Langlois, David [Astroparticule et Cosmologie (APC), UMR 7164-CNRS, Université Denis Diderot-Paris 7, 10 rue Alice Domon et Léonie Duquet, 75205 Paris (France); Mizuno, Shuntaro, E-mail: xgao@apc.univ-paris7.fr, E-mail: langlois@apc.univ-paris7.fr, E-mail: shuntaro.mizuno@th.u-psud.fr [Laboratoire de Physique Théorique, Université Paris-Sud 11 et CNRS, Bâtiment 210, 91405 Orsay Cedex (France)

2012-10-01T23:59:59.000Z

274

Texas Feedgrain Flows and Transportation Modes, 1974.  

E-Print Network (OSTI)

ELEVATO RS AND FEEDMILLS . . . Destinations ............................ . .... . . . Modes of Transpo rtation of Grain Shipments ... .. . Destinations of Intraregi on and Interregion S Modes o f Transportation of Intraregion and Interregion Shipments.... Texas feedyards, receiving almost 31 per cent of the grain sorghum shipments of the elevators, ranked as the second most important market outlet. The remainder of the shipments was to out-of-state destinations (6.4 percent) and other Texas elevators...

Fuller, Stephen W.; Knudson, L. Bruce

1977-01-01T23:59:59.000Z

275

Singular Modes of the Electromagnetic Field  

E-Print Network (OSTI)

We show that the mode corresponding to the point of essential spectrum of the electromagnetic scattering operator is a vector-valued distribution representing the square root of the three-dimensional Dirac's delta function. An explicit expression for this singular mode in terms of the Weyl sequence is provided and analyzed. An essential resonance thus leads to a perfect localization (confinement) of the electromagnetic field, which in practice, however, may result in complete absorption.

Neil V. Budko; Alexander B. Samokhin

2006-06-15T23:59:59.000Z

276

Singular Modes of the Electromagnetic Field  

E-Print Network (OSTI)

We show that the mode corresponding to the point of essential spectrum of the electromagnetic scattering operator is a vector-valued distribution representing the square root of the three-dimensional Dirac's delta function. An explicit expression for this singular mode in terms of the Weyl sequence is provided and analyzed. An essential resonance thus leads to a perfect localization (confinement) of the electromagnetic field, which in practice, however, may result in complete absorption.

Budko, N V; Budko, Neil V.; Samokhin, Alexander B.

2006-01-01T23:59:59.000Z

277

Electroweak strings, zero modes and baryon number  

Science Journals Connector (OSTI)

The Dirac equations for leptons and quarks in the background of an electroweak Z—string have zero mode solutions. If two loops of electroweak string are linked, the zero modes on one of the loops interacts with the other loop via an Aharanov-Bohm interaction. The effects of this interaction are briefly discussed and it is shown that the fermions induce a baryon number on linked loops of Z—string.

Tanmay Vachaspati

1995-01-01T23:59:59.000Z

278

Modes of storage ring coherent instabilities  

SciTech Connect

Longitudinal impedance in a beam and various modes of longitudinal coherent instabilities are discussed. The coasting beam coherent instability, microwave instability, and single-bunch longitudinal coherent instabilities are considered. The Vlasov equation is formulated, and a method of solving it is developed. The synchrotron modes are treated, which take the possible bunch shape distortion fully into consideration. A method of treating the synchrotron mode coupling in the case of a small bunch is discussed which takes advantage of the fact that only a few of the synchrotron modes can contribute in such a case. The effect of many bunches on the coherent motion of the beam and the longitudinal symmetric coupled bunch modes are discussed. The transverse impedance is then introduced, and the transverse coasting beam instability is discussed. Various bunched beam instabilities are discussed, including both single bunch instabilities and coupled bunch instabilities. The Vlasov equation for transverse as well as longitudinal motion of particles is introduced as well as a method of solving it within a linear approximation. Head-tail modes and short bunch instabilities and strong coupling instabilities in the long bunch case are covered. (LEW)

Wang, J.M.

1986-12-01T23:59:59.000Z

279

INTEGRATING PHOTOVOLTAIC SYSTEMS  

E-Print Network (OSTI)

INTEGRATING PHOTOVOLTAIC SYSTEMS INTO PUBLIC SECTOR PERFORMANCE CONTRACTS IN DELAWARE FINAL for Energy and Environmental Policy University of Delaware February 2006 #12;INTEGRATING PHOTOVOLTAIC..................................................................................................... 1 1.2 Photovoltaics in Performance Contracts: An Overview

Delaware, University of

280

Nonlinear viscosity and its role in drift-Alfven modes  

SciTech Connect

The moment approach is used to analyze the part of the magnetized plasma viscosity related to the nonlinear character of the Landau collision integral in the Boltzmann kinetic equation (nonlinear viscosity), pointed out by Catto and Simakov [Phys. Plasmas 11, 90 (2004)]. It is shown that the results of these authors, who have used an alternative procedure based on a more detailed analysis of the kinetic equation, correspond to a 15-moment approach. In comparison with the 13-moment approach (density, temperature, velocity, heat flux, and the viscosity tensor) of Grad, the 15-moment approach takes into account two higher-order moments, one of which is the vector-type moment similar to the parallel heat flux and the second is the tensor-type moment similar to the parallel projection of the viscosity tensor. Both these higher-order moments enter into the Braginskii approximation. The nonlinear viscosity calculated in the scope of the 13-moment Grad approach is qualitatively the same as that found by Catto and Simakov. Its role is investigated for drift-Alfven modes, driven by the combined effect of the dissipative part of perpendicular heat conductivity and the standard collisional viscosity, and it is shown to be essential for the radial transport of these modes. It is shown that the wave packet of drift-Alfven modes, propagating in the diamagnetic drift direction and driven for reversed temperature gradient, is transported down the pressure gradient. In contrast to this, the wave packet propagating in the electron diamagnetic drift direction and driven for positive temperature gradient is transported up the pressure gradient.

Tsypin, V.S.; Mikhailovskii, A.B.; Shirokov, M.S.; Kovalishen, E.A.; Konovalov, S.V.; Galvao, R.M.O. [Physics Institute, University of Sao Paulo, Cidade Universitaria, 05508-900, Sao Paulo (Brazil); Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, Kurchatov Sq., 1, Moscow 123182 (Russian Federation) and Nonlinear Physics Laboratory, Moscow Institute of Physics and Technology, Institutskii per. 9, Dolgoprudnyi 141700, Moscow Region (Russian Federation); Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, Kurchatov Sq., 1, Moscow 123182 (Russian Federation) and Moscow Engineering Physics Institute, Kashirskoe Shosse 31, Moscow 115409 (Russian Federation); Nonlinear Physics Laboratory, Moscow Institute of Physics and Technology, Institutskii per. 9, Dolgoprudnyi 141700 (Russian Federation) and Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, Kurchatov Sq., 1, Moscow 123182 (Russian Federation); Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, Kurchatov Sq., 1, Moscow 123182 (Russian Federation); Physics Institute, University of Sao Paulo, Cidade Universitaria, 05508-900, Sao Paulo (Brazil) and Brazilian Center for Research in Physics, Rua Xavier Sigaud, 150, 22290-180, Rio de Janeiro (Brazil)

2005-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Integration of LED chip within patch antenna geometry for hybrid FSO/RF communication  

E-Print Network (OSTI)

Integration of LED chip within patch antenna geometry for hybrid FSO/RF communication J. Liao, A mode communi- cation transmitter using a LED integrated within the geometry of a planar patch antenna the geometry of the patch antenna to create a miniaturised LED/RF package. The RF channel can either work

Huang, Zhaoran "Rena"

282

Project_Descriptions_ITP_ARRA_Awards.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Selections for Industrial Technologies Program Recovery Act Funding Selections for Industrial Technologies Program Recovery Act Funding Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment Award Winners City and State Project Description Total DOE Funding Air Products and Chemicals, Inc. Middletown, OH Waste Energy Project at the AK Steel Corporation Middletown Works. The project will construct a combined cycle power generation plant at the Middletown, OH, works of AK Steel that will capture and process the blast furnace gas (BFG). The BFG, generated in ironmaking operations, is either flared or used to make steam needed for industrial processes . Currently, over 50% of the BFG is flared. This project will utilize

283

Site Acquisition Description/ Category Contracting Office Solicitation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Acquisition Acquisition Description/ Category Contracting Office Solicitation Method Contract Type Estimated Dollar Range Pre-Solicitation Conference/ Industry Meetings Draft- Solicitation Synopsis Solicitation Receipt of Proposal Anticipated Evaluations Complete/Award Paducah GDP http://www.emcbc.doe.g ov/pgdp%20deactivatio n/ EMCBC Multiple award IDIQ contract holders Cost Plus Award Fee with Fixed Price clins $600M- $680M 5/1/2013 5/29/2013 N/A 8/9/2013 Jul-Sep 2013 Oct-Dec 2014 ETEC EMCBC Small Business Firm-Fixed Price & Fixed Unit Rate Price CLINS $25M-$40M 9/19/2013 Jul-Sep 2013 Oct-Dec 2013 Oct-Dec 2013 Jan-Mar 2014 Jul-Sep 2014 Lab Services EMCBC Small Business Fixed Price $40M-$60M Jan-Mar 2014 Jan-Mar 2014 Jan-Mar 2014 Apr-Jun 2014 Apr-Jun 2014 Jan-Mar 2015

284

INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO  

Office of Legacy Management (LM)

INCOMING DOCUMENT CONTROL FORM DOCUMENT DESCRIPTION ORGANIZATIO )ATE COMPLETED: ACTION NUMBER: I ! I I DOCUMENT CONTROL DATE INITIALS DATA BASE: ACTION LOG: FILED: To : Doug Tonkay, OTS Decen From: MIchele Landis, dRW Subject: Draft report ~ Result= of the Radiologic; Former Ore Storage Site, Palmerton, Pennsylvania Attached is one copy of the draft report. PIE provide your comments to me by January 16, 1990. tlichele Landis ,9, 1989 "ey at the review and Results of the Radiological SJrvey at the Former Ore S&age Site, Palmerton, PennsylvLnia (PPOOI) J. L Quikd J. W. Cdchdr W. D. &rei ! I : HEALTH AND t5UEI-Y RESEARCH DMSi Waste Management Research and Development Prc (Activity No. AH 10 05 00 0; NEAHOOl) RESULTS OF 'I-HE RADIOLOGICAL SURV

285

Title, Location, Document Number Estimated Cost Description  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moody to Lev, SUBJECT: NEPA 2012 APS for DOE-SRS, Dated: JAN 25 2012 Moody to Lev, SUBJECT: NEPA 2012 APS for DOE-SRS, Dated: JAN 25 2012 Title, Location, Document Number Estimated Cost Description EA Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain EA Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $65,000 Annual NEPA Planning Summary NEPA Reviews of Proposals to Implement Enterprise SRS Initiatives unknown The Savannah River Site Strategic Plan for 2011 - 2015 describes 12 initiatives that Enterprise SRS will pursue by applying SRS's management core competencies in nuclear materials. Implementation of new missions resulting from this effort will likely require NEPA review. However, until firm proposals are developed

286

Property:Description | Open Energy Information  

Open Energy Info (EERE)

This is a property of type Text. This is a property of type Text. Pages using the property "Description" Showing 25 pages using this property. (previous 25) (next 25) 1 1.5-ft Wave Flume Facility + Automated data acquisition and control system 10-ft Wave Flume Facility + Automated data acquisition and control system 11-ft Wave Flume Facility + Automated data acquisition and control system 2 2-ft Flume Facility + Automated data acquisition and control system 3 3-ft Wave Flume Facility + Automated data acquisition and control system 5 5-ft Wave Flume Facility + Automated data acquisition and control system 6 6-ft Wave Flume Facility + Automated data acquisition and control system A Alden Large Flume + Differential pressure transducers, acoustic profiling, propeller meters, load cells, computer data acquisition systems.

287

Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION The Office of Electricity Delivery and Energy Reliability (OE) leads national efforts to modernize the electric grid, enhance security and reliability of energy infrastructure, and facilitate recovery from disruptions to the energy supply. As stated in the President's A Policy Framework for the 21 st Century Grid, a smarter, modernized electric grid is fundamental to transforming the Nation's energy system and securing US leadership in a clean energy future. OE supports activities that enable innovation across the energy sector, empower American consumers, and secure our energy future. OE consists of three programs: Research and Development; Permitting, Siting and Analysis; and Infrastructure Security and Energy Restoration.

288

Variational description of the nuclear free energy  

Science Journals Connector (OSTI)

By means of a variational calculation, we place an upper bound on the finite-temperature free energy for nuclear systems which can be described by pseudospin Hamiltonians. The trial states are irreducible permutation invariant Gibbs states. The best trial state is the one which minimizes the free energy operator. We compare the upper bound with the numerically computed free energy for the Meshkov-Glick-Lipkin Hamiltonian for various values of nucleon number N and nuclear interaction strength V. For large N and/or ?(=1kT) the best trial Gibbs state becomes a good approximation to the actual density operator. Somewhat surprisingly, the variational approach reveals the presence of a second order thermodynamic phase transition much more clearly than the numerical computation does, even though the former is only an approximation to the latter.NUCLEAR STRUCTURE Finite-temperature free energy, pseudospin Hamiltonian, variational description and phase transitions, atomic coherent states.

Da Hsuan Feng; Robert Gilmore; L. M. Narducci

1979-03-01T23:59:59.000Z

289

A statistical mechanical description of biomolecular hydration  

SciTech Connect

We present an efficient and accurate theoretical description of the structural hydration of biological macromolecules. The hydration of molecules of almost arbitrary size (tRNA, antibody-antigen complexes, photosynthetic reaction centre) can be studied in solution and in the crystal environment. The biomolecular structure obtained from x-ray crystallography, NMR, or modeling is required as input information. The structural arrangement of water molecules near a biomolecular surface is represented by the local water density analogous to the corresponding electron density in an x-ray diffraction experiment. The water-density distribution is approximated in terms of two- and three-particle correlation functions of solute atoms with water using a potentials-of-mean-force expansion.

NONE

1996-02-01T23:59:59.000Z

290

Wigner-function description of EPR experiment  

E-Print Network (OSTI)

We provide a detailed description of the EPR paradox (in the Bohm version) for a two qubit-state in the discrete Wigner function formalism. We compare the probability distributions for two qubit relevant to simultaneously-measurable observables (computed from the Wigner function) with the probability distributions representing two perfectly-correlated classic particles in a discrete phase-space. We write in both cases the updating formulae after a measure, thus obtaining a mathematical definition of \\textit{classic collapse} and \\textit{quantum collapse}. We study, with the EPR experiment, the joint probability distributions of Alice's and Bob's qubit before and after the measure, analyzing the non-local effects. In particular, we give a more precise definition of locality, which we call m-locality: we show that quantum systems may violate this kind of locality, thus preserving, in an EPR-like argument, the completeness of Quantum Mechanics.

Riccardo Franco

2007-01-12T23:59:59.000Z

291

SSL Selections Descriptions v6.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Zip Code Zip Code Project Description DOE Funding Total Project Value Cambrios Sunnyvale, CA 94085-4520 Solution-Processable Transparent Conductive Hole Injection Electrode for Organic Light-Emitting Diode (OLED) SSL. This project seeks to develop a cost-effective replacement for indium tin oxide for use as an electrode in OLED lighting devices. Indium is both rare and very expensive. $1,199,971 $1,846,110 University of Rochester Rochester, NY 14627-0216 Development and Utilization of Host Materials for White Phosphorescent OLEDs. This project seeks to produce white OLEDs with > 100 lm/W efficiency after light extraction enhancement and > 10,000 hour operating time, by making a new class of emissive materials. $1,239,071 $1,376,746 WhiteOptics, LLC

292

Transmission Commercial Project Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Improvement (CBPI) Customer Forum Energy Imbalance Market Generator Interconnection Reform Implementation Network Integration Transmission Service (NT Service) Network Open...

293

Q-balls, Integrability and Duality  

E-Print Network (OSTI)

This paper is concerned with the dynamics and interactions of Q-balls in (1+1)-dimensions. The asymptotic force between well-separated Q-balls is calculated to show that Q-balls can be attractive or repulsive depending upon their relative internal phase. An integrable model with exact multi-Q-ball solutions is investigated and found to be of use in explaining the dynamics in non-integrable theories. In particular, it is demonstrated that the dynamics of small Q-balls in a generic class of non-integrable models tends towards integrable dynamics as the charge decreases. Long-lived oscillations of a single Q-ball can also be understood in terms of a deformation of an exact breather solution in the integrable model. Finally, we show that any theory with Q-ball solutions has a dual description in which a stationary Q-ball is dual to a static kink, with an interchange of Noether and topological charges.

Peter Bowcock; David Foster; Paul Sutcliffe

2009-01-08T23:59:59.000Z

294

The Slow Manifold of a Five-Mode Model  

Science Journals Connector (OSTI)

The slow manifold of an inviscid five-mode model introduced by Lorenz is investigated. When the influence of the gravity modes on the Rossby modes is neglected, the analytical solution given by Lorenz and Krishnamurthy is generalized. When ...

John P. Boyd

1994-04-01T23:59:59.000Z

295

Monitored Geologic Repository Project Description Document  

SciTech Connect

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (CRWMS M&O 2000b) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) engineering design basis in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The engineering design basis documented in the PDD is to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the engineering design basis from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the engineering design basis captured in the SDDs and the design requirements captured in U.S. Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 2-1, the MGR Architecture (Section 4.1),the Engineering Design Bases (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2000-06-01T23:59:59.000Z

296

Monitored Geologic Repository Project Description Document  

SciTech Connect

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. Curry

2001-06-26T23:59:59.000Z

297

Monitored Geologic Repository Project Description Document  

SciTech Connect

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

P. M. Curry

2001-01-30T23:59:59.000Z

298

Video integrated measurement system. [Diagnostic display devices  

SciTech Connect

A Video Integrated Measurement (VIM) System is described which incorporates the use of various noninvasive diagnostic procedures (moire contourography, electromyography, posturometry, infrared thermography, etc.), used individually or in combination, for the evaluation of neuromusculoskeletal and other disorders and their management with biofeedback and other therapeutic procedures. The system provides for measuring individual diagnostic and therapeutic modes, or multiple modes by split screen superimposition, of real time (actual) images of the patient and idealized (ideal-normal) models on a video monitor, along with analog and digital data, graphics, color, and other transduced symbolic information. It is concluded that this system provides an innovative and efficient method by which the therapist and patient can interact in biofeedback training/learning processes and holds considerable promise for more effective measurement and treatment of a wide variety of physical and behavioral disorders.

Spector, B.; Eilbert, L.; Finando, S.; Fukuda, F.

1982-06-01T23:59:59.000Z

299

Advanced, Integrated Control for Building Operations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced, Integrated Control for Building Advanced, Integrated Control for Building Operations Advanced, Integrated Control for Building Operations The U.S. Department of Energy (DOE) is currently conducting research into advanced integrated controls for building operations and seeking to validate energy savings strategies by simulations. Project Description This project will develop an advanced, integrated control for the following building systems: Cooling and heating Lighting Ventilation Window and blind operation. A variety of operation and energy saving control strategies will be evaluated on a building equipped with alternative cooling and heating methods, including fan coil units, radiant mullions, and motorized window and blinds. Project Partners Research is being undertaken by DOE, Siemens Corporate Research, Siemens

300

Integrated Warm Gas Multicontaminant Cleanup Technologies for Coal-Derived Syngas  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Warm Gas Multicontaminant Integrated Warm Gas Multicontaminant Cleanup Technologies for Coal-Derived Syngas Description Integrated Gasification Combined Cycle (IGCC) technology offers a means to utilize coal -the most abundant fuel in the United States-to produce a host of products, ranging from electricity to value-added chemicals like transportation fuels and hydrogen, in an efficient, environmentally friendly manner. However, the overall cost (capital, operating,

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Procurement Integrity Brochure What is Procurement Integrity...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

involved in agency procurements and contracts. This brochure is intended to act as a primer for all DOE employees on issues related to procurement integrity. As such, not all...

302

Mode Initialization for On-line Estimation of Power System Electromechanical Modes  

SciTech Connect

Measurement-based mode estimation methods are utilized to estimate electromechanical modes of a power system using phasor measurement units (PMU) data. These methods need to extract a certain amount of information before they can give useable mode estimation. Traditionally, the information is gathered solely from measurement data. Priori mode information from other resources (e.g. model eigenvalue analysis, engineering knowledge) are not fully utilized. For real time application, this means that mode estimation takes time to converge. By adding a mode regularization term in the objective function, this paper proposes a mode initialization method to include priori mode information in a regularized robust recursive least squares (R3LS) algorithm for on-line mode estimation. The proposed method is tested using a simple model, a 17 machine model and is shown to be able to shorten the convergence period of the R3LS algorithm. The proposed method is also applied on the measurement data recorded right before a major power outage in the western North American Grid on August 10th 1996 to show its potential applica-tion in detecting an approaching small signal stability problem.

Zhou, Ning; Trudnowski, Daniel; Pierre, John W.

2009-03-18T23:59:59.000Z

303

Mixed-mode diesel HCCI with External Mixture Formation: Preliminary...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results 2003 DEER Conference...

304

Modeling Combustion Control for High Power Diesel Mode Switching  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Emissions Research Conference 2010 Modeling Combustion Control for High Power Diesel Mode Switching P-20 Motivation * High power LTC-diesel mode operation * Transient...

305

Modeling Combustion Control for High Power Diesel Mode Switching...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Control for High Power Diesel Mode Switching Modeling Combustion Control for High Power Diesel Mode Switching Poster presentation given at the 16th Directions in...

306

Unregulated Emissions from High-Efficiency Clean Combustion Modes...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Unregulated Emissions from High-Efficiency Clean Combustion Modes - ORNL-FEERC Unregulated Emissions from High-Efficiency Clean Combustion Modes - ORNL-FEERC Poster presentation at...

307

Fact #636: August 16, 2010 Transportation Energy Use by Mode...  

Energy Savers (EERE)

by Mode, 2008 Bar graph showing the transportation energy use by mode (buses, rail, pipeline, water, air, mediumheavy trucks, and light vehicles) for 2008. For more detailed...

308

Analysis of electromagnetic modes excited in overmoded structure terahertz source  

SciTech Connect

A method on electromagnetic mode analysis in overmoded structure terahertz source is studied in this paper. This mode analysis method is based on Fourier-Bessel series and the particle-in-cell simulation. The result of mode analysis shows that there are TM{sub 02} and TM{sub 03} modes present in the waveguide motivated by mode change in the discontinuity. The mode content keeps stable when the device starts to work. The magnetic field and the voltage of beam do not change the mode content to some extent. The parameters of diode affect the mode content significantly.

Li, Xiaoze; Xiao, Renzhen; Wang, Guangqiang; Zhang, Lijun; Zhang, Yuchuan; Ye, Hu [Northwest Institute of Nuclear Technology, P. O. Box 69-1, Xi'an 710024 (China)] [Northwest Institute of Nuclear Technology, P. O. Box 69-1, Xi'an 710024 (China); Wang, Jianguo [Northwest Institute of Nuclear Technology, P. O. Box 69-1, Xi'an 710024 (China) [Northwest Institute of Nuclear Technology, P. O. Box 69-1, Xi'an 710024 (China); School of Electronic and Information Engineering, Xi'an Jiaotong University, Xi'an 710049 (China)

2013-08-15T23:59:59.000Z

309

Calculation of the vacuum Green's function valid even for high toroidal mode numbers in tokamaks  

Science Journals Connector (OSTI)

The present evaluation of the Green's function used for the magnetic scalar potential in vacuum calculations for axisymmetric geometry has been found to be deficient even for moderately high, n, the toroidal mode number. This is relevant to the edge ... Keywords: 52.55.Fa, 52.65.Cc, 65D15, 65D30, Integral representation, Legendre function, Recursion relation, Tokamak vacuum Green's function

M. S. Chance; A. D. Turnbull; P. B. Snyder

2007-01-01T23:59:59.000Z

310

Radiative Decay Modes of the Muon  

Science Journals Connector (OSTI)

A 5-in. freon bubble chamber was used to search for the following decay modes of the ?+ meson: (1) ?+?e++?, (2) ?+?e++e-+e+, (3) ?+?e++?0+?¯0+?, (4) ?+?e++?0+?¯0+e++e-. Two exposures were made at the Carnegie Institute of Technology synchrocyclotron. A total of 200 000 pictures were taken yielding 3.3×105 ?+ meson decays.A total of 3×105 ?+ decays were examined for mode (1). No decays consistent with this mode were found. The upper limit on the branching ratio Rrad was found to be Rrad=(?+?e++?)(?+?e++?0+?¯0)<2.5×10-5.A total of 3.3×105 ?+ decays were scanned for mode (2) and no such decays were observed. The limit on the branching ratio R3e was found to be R3e=(?+?e++e-+e+)(?+?e++?0+?¯0)<4×10-6.The internal bremsstrahlung rate (mode 3) was measured for two values of E?0 (the minimum photon energy detected). The results were RIB=(?+?e++?0+?¯0+?)(?+?e++?0+?¯0), RIB=(1.4±0.4)×10-2, E?0=10 Mev, RIB=(3.3±1.3)×10-3, E?0=20 Mev.The rate of internal conversion of internal bremsstrahlung [mode (4)] was found to be RIC=(?+?e++?0+?¯0+e++e-)(?+?e++?0+?¯0)=(2.2±1.5)×10-5, E0=10 Mev, where E0 is the minimum energy of the internally converted ? ray.A summary is given of previous experiments on these decay modes and results are discussed with special reference to the intermediate boson scheme of weak four-fermion interactions.

R. R. Crittenden; W. D. Walker; J. Ballam

1961-03-15T23:59:59.000Z

311

Sandia National Laboratories: Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Grid Integration Energy Supply Transformation Needed On February 20, 2013, in DETL, Distribution Grid Integration, Energy, Energy Assurance, Energy Surety, Grid Integration,...

312

Advanced Integrated Systems Technology Development  

E-Print Network (OSTI)

conditioning in buildings featuring integrated design withconditioning in buildings featuring integrated design withof a building with advanced integrated design involving one

2013-01-01T23:59:59.000Z

313

Microsoft PowerPoint - ostiorgchart [Compatibility Mode  

NLE Websites -- All DOE Office Websites (Extended Search)

Director Brian A. Hitson Director Administration & Information Services Deborah E. Cutler Acting Associate Director Program Integration Mark A. Martin Assistant Director...

314

Single transverse mode selectively oxidized vertical cavity lasers  

SciTech Connect

Vertical cavity surface emitting lasers (VCSELs) which operate in multiple transverse optical modes have been rapidly adopted into present data communication applications which rely on multi-mode optical fiber. However, operation only in the fundamental mode is required for free space interconnects and numerous other emerging VCSEL applications. Two device design strategies for obtaining single mode lasing in VCSELs based on mode selective loss or mode selective gain are reviewed and compared. Mode discrimination is attained with the use of a thick tapered oxide aperture positioned at a longitudinal field null. Mode selective gain is achieved by defining a gain aperture within the VCSEL active region to preferentially support the fundamental mode. VCSELs which exhibit greater than 3 mW of single mode output power at 850 nm with mode suppression ratio greater than 30 dB are reported.

CHOQUETTE,KENT D.; GEIB,KENT M.; BRIGGS,RONALD D.; ALLERMAN,ANDREW A.; HINDI,JANA JO

2000-04-26T23:59:59.000Z

315

Azimuthal Asymmetries and Vibrational Modes in Bubble Pinch-off  

E-Print Network (OSTI)

The pressure-driven inertial collapse of a cylindrical void in an inviscid liquid is an integrable, Hamiltonian system that forms a finite-time singularity as the radius of the void collapses to zero. Here it is shown that when the natural cylindrical symmetry of the void is perturbed azimuthally, the perturbation modes neither grow nor decay, but instead cause constant amplitude vibrations about the leading-order symmetric collapse. Though the amplitudes are frozen in time, they grow relative to the mean radius which is collapsing to zero, eventually overtaking the leading-order symmetric implosion. Including weak viscous dissipation destroys the integrability of the underlying symmetric implosion, and the effect on the stability spectrum is that short-wavelength disturbances are now erased as the implosion proceeds. Introducing a weak rotational flow component to the symmetric implosion dynamics causes the vibrating shapes to spin as the mean radius collapses. The above theoretical scenario is compared to a closely related experimental realization of void implosion: the disconnection of an air bubble from an underwater nozzle. There, the thin neck connecting the bubble to the nozzle implodes primarily radially inward and disconnects. Recent experiments were able to induce vibrations of the neck shape by releasing the bubble from a slot-shaped nozzle. The frequency and amplitude of the observed vibrations are consistent with the theoretical prediction once surface tension effects are taken into account.

Laura E. Schmidt

2011-12-19T23:59:59.000Z

316

Integrated Predictive Demand Response Controller Research Project |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Predictive Demand Response Predictive Demand Response Controller Research Project Integrated Predictive Demand Response Controller Research Project The U.S. Department of Energy (DOE) is currently conducting research into integrated predictive demand response (IPDR) controllers. The project team will attempt to design an IPDR controller so that it can be used in new or existing buildings or in collections of buildings. In the case of collections of buildings, they may be colocated on a single campus or remotely located as long as they are served by a single utility or independent service operator. Project Description This project seeks to perform the necessary applied research, development, and testing to provide a communications interface using industry standard open protocols and emerging National Institute of Standards and Technology

317

A STATE VARIABLE DESCRIPTION OF THE RHIC RF CONTROL LOOPS.  

SciTech Connect

The beam transfer function changes during the RHIC ramp. The response of the RF control loops changes as a result. A state-variable description of the beam and the RF control loops was developed. This description was used to generate a set of feedback matrices that keeps the response of the RF control loops constant during the ramp. This paper describes the state-variable description and its use in determining the K matrices.

SCHULTHEISS,C.; BRENNAN,J.M.

2002-06-02T23:59:59.000Z

318

Theoretical descriptions of neutron emission in fission  

SciTech Connect

Brief descriptions are given of the observables in neutron emission in fission together with early theoretical representations of two of these observables, namely, the prompt fission neutron spectrum N(E) and the average prompt neutron multiplicity {bar {nu}}{sub p}. This is followed by summaries, together with examples, of modern approaches to the calculation of these two quantities. Here, emphasis is placed upon the predictability and accuracy of the new approaches. In particular, the dependencies of N(E) and {bar {nu}}{sub p} upon the fissioning nucleus and its excitation energy are discussed. Then, recent work in multiple-chance fission and other recent work involving new measurements are presented and discussed. Following this, some properties of fission fragments are mentioned that must be better known and better understood in order to calculate N(E) and {bar {nu}}{sub p} with higher accuracy than is currently possible. In conclusion, some measurements are recommended for the purpose of benchmarking simultaneous calculations of neutron emission and gamma emission in fission. 32 refs., 26 figs.

Madland, D.G.

1990-01-01T23:59:59.000Z

319

Unified description of screened modified gravity  

Science Journals Connector (OSTI)

We consider modified gravity models driven by a scalar field whose effects are screened in high density regions due to the presence of nonlinearities in its interaction potential and/or its coupling to matter. Our approach covers chameleon, f(R) gravity, dilaton and symmetron models and allows a unified description of all these theories. We find that the dynamics of modified gravity are entirely captured by the time variation of the scalar field mass and its coupling to matter evaluated at the cosmological minimum of its effective potential, where the scalar field has sat since an epoch prior to big bang nucleosynthesis. This new parametrization of modified gravity allows one to reconstruct the potential and coupling to matter and therefore to analyze the full dynamics of the models, from the scale dependent growth of structures at the linear level to nonlinear effects requiring N-body simulations. This procedure is illustrated with explicit examples of reconstruction for chameleon, dilaton, f(R) and symmetron models.

Philippe Brax; Anne-Christine Davis; Baojiu Li; Hans A. Winther

2012-08-08T23:59:59.000Z

320

Detecting individual gravity modes in the Sun  

E-Print Network (OSTI)

Many questions are still open regarding the structure and the dynamics of the solar core. By constraining more this region in the solar evolution models, we can reduce the incertitudes on some physical processes and on momentum transport mechanisms. A first big step was made with the detection of the signature of the dipole-gravity modes in the Sun, giving a hint of a faster rotation rate inside the core. A deeper analysis of the GOLF/SoHO data unveils the presence of a pattern of peaks that could be interpreted as dipole gravity modes. In that case, those modes can be characterized, thus bringing better constraints on the rotation of the core as well as some structural parameters such as the density at these very deep layers of the Sun interior.

Garcia, R A; Eff-Darwich, A; Garrido, R; Jimenez, A; Mathis, S; Moya, A; Palle, P L; Regulo, C; Salabert, D; Suarez, J C; Turck-Chieze, S

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Contained Modes In Mirrors With Sheared Rotation  

SciTech Connect

In mirrors with E × B rotation, a fixed azimuthal perturbation in the lab frame can appear as a wave in the rotating frame. If the rotation frequency varies with radius, the plasma-frame wave frequency will also vary radially due to the Doppler shift. A wave that propagates in the high rotation plasma region might therefore be evanescent at the plasma edge. This can lead to radially localized Alfven eigenmodes with high azimuthal mode numbers. Contained Alfven modes are found both for peaked and non-peaked rotation profiles. These modes might be useful for alpha channeling or ion heating, as the high azimuthal wave number allows the plasma wave frequency in the rotating frame to exceed the ion cyclotron frequency. __________________________________________________

Abraham J. Fetterman and Nathaniel J. Fisch

2010-10-08T23:59:59.000Z

322

High frequency electromagnetic modes in a weakly magnetized relativistic electron plasma  

SciTech Connect

Using the linearized Vlasov-Maxwell model, the polarization tensor for a weakly magnetized electron plasma is derived. For isotropic relativistic Maxwellian velocity distribution function, dispersion relations are obtained for both parallel and perpendicular propagations. The integrals (called Meijer G functions) that arise due to relativistic effects are examined in various limits and dispersion relations are derived for the nonrelativistic, weakly, strongly, and ultrarelativistic Maxwellian velocity distributions. It is generally observed that the propagation domains of the modes are enlarged as one proceeds from the nonrelativistic to the highly relativistic regime. Resultantly, due to the relativistic effects, the Whistler mode is suppressed in the R-wave, the nonpropagation band of X-mode is reduced, and the X-mode itself approaches the O-mode. Further, the results derived in the ultra- and nonrelativistic limits found to be in agreement with the earlier calculations [G. Abbas et al. Phys. Scr. 76, 649 (2007); F. F. Chen, Introduction to Plasma Physics and Controlled Fusion (Plenum, New York, 1984), Vol. 1].

Abbas, Gohar; Murtaza, G. [Department of Physics, G. C. University, Lahore 54000 (Pakistan); Kingham, R. J. [Plasma Physics Group, Imperial College, Blackett Laboratory, London SW7 2AZ (United Kingdom)

2010-07-15T23:59:59.000Z

323

User's Guide to BModes (Software for Computing Rotating Beam-Coupled Modes)  

SciTech Connect

This guide explains data preparation and execution with BModes, a finite-element code that provides dynamically coupled modes for a beam. The beam can be a rotating or non-rotating rotor blade or a tower, and it can have arbitrary distribution of structural properties and geometry along its length. A coupled mode implies presence of coupled flexural, axial, and torsion motions in a natural mode of vibration. Knowledge of flap-lag-torsion-axial coupled modes is crucial to several applications. Examples are: accurate modeling of major flexible components for modal-based aeroelastic codes such as FAST (Fatigue, Aerodynamics, Structures, and Turbulence), validation of flexible component models using experimental data, modal-based fatigue analysis, and interpretation of aeroelastic-stability behavior of turbines. Our plan is to eventually integrate BModes with FAST to provide tower and blade modes as rotor speed and blade pitch control settings change during a simulation. This guide provides step-by-step instructions on how to prepare input files (specify blade geometry, section properties, and finite-element discretization), how to execute the code, and how to interpret the outputs.

Bir, G.

2005-12-01T23:59:59.000Z

324

Coupled-mode theory for film-coupled plasmonic nanocubes  

Science Journals Connector (OSTI)

Planar metallic nanoparticles separated by nanoscale distances from a metal film support unique plasmonic resonances useful for controlling a wide range of photodynamic processes. The fundamental resonance of a film-coupled planar nanoparticle arises from a transmission-line mode localized between nanoparticle and film, whose properties can be roughly approximated by closed form expressions similar to those used in patch antenna theory. The insight provided by the analytical expressions, and the potential of achieving similar closed-form expressions for a range of plasmonic phenomenon such as spasing, fluorescence enhancement, and perfect absorbers, motivates a more detailed study of the film-coupled patch. Here, we present an expanded analytical analysis of the plasmonic patch geometry, applying an eigenmode expansion method to arrive at a more accurate description of the field distribution underneath a film-coupled plasmonic nanocube. The fields corresponding to the inhomogeneous Maxwell's equations are expanded in a set of lossless waveguide eigenmodes. Radiation damping and Ohmic losses are then perturbatively taken into account by considering an equivalent surface impedance. We find that radiative loss couples the lossless eigenmodes, leading to discernible features in the scattering spectra of the nanocubes. The method presented can be further applied to the case of point source excitations, in which accounting for all potential eigenmodes becomes essential.

Patrick T. Bowen and David R. Smith

2014-11-03T23:59:59.000Z

325

Tokamak Physics EXperiment (TPX): Toroidal field magnet design, development and manufacture. SDRL 15, System design description. Volume 1  

SciTech Connect

This System Design Description, prepared in accordance with the TPX Project Management Plan provides a summary or TF Magnet System design features at the conclusion of Phase I, Preliminary Design and Manufacturing Research. The document includes the analytical and experimental bases for the design, and plans for implementation in final design, manufacturing, test, and magnet integration into the tokamak. Requirements for operation and maintenance are outlined, and references to sources of additional information are provided.

NONE

1995-09-22T23:59:59.000Z

326

E-Print Network 3.0 - approximation descriptions microscopiques...  

NLE Websites -- All DOE Office Websites (Extended Search)

de l'approximation locale. Ce calcul est entirement... :lpmmc.grenoble.cnrs.frspip.php?article404 Description : Les polaritons de cavit sont des quasiparticules hybrides...

327

Position: IT pre-sales engineer. Job Description  

E-Print Network (OSTI)

Position: IT pre-sales engineer. Job Description: Develop sales proposals Provide technical sales. Ability to work under pressure in a dynamic environment. Excellent communication, interpersonal

328

Characterization of Single-mode Chalcogenide Optical Fiber for Mid-Infrared Applications  

SciTech Connect

Chalcogenide fibers display a wide transmission window ranging from 2-10.6 ?m, ideally suited to the development of passive and active mid-infrared (MIR) sensors. They are essential building blocks for the integration and miniaturization of laser-based MIR optical systems for terrestrial, airborne and space-based sensing platforms. Single-mode chalcogenide fibers have only recently become commercially available and therefore performance data and standard reproducible processing techniques have not been widely reported. In this paper we present a method for producing high quality facets on commercial single-mode As-Se fibers with core and cladding diameters of 28.1 and 169.9?m respectively. The emitted beam profile from these fibers, using the 9.4?m line of a tunable CO2 laser, showed the presence of leaky cladding modes due to waveguiding conditions created by the protective acrylate jacket. These undesirable cladding modes were easily suppressed by applying a gallium coating on the cladding near both input and output facets. We provide experimental data of efficient mode suppression and the emission of a circular near-perfect Gaussian beam profile from the fiber. A model to determine appropriate placement of gallium coatings to minimize processing while maximizing cladding mode suppression is currently underway. Furthermore, analyses of the beam, acquired by scanning an HgCdTe detector, yielded a 1/e2 numerical aperture of 0.11 with a full width half maximum divergence of 11° for these fibers. The availability of single-mode MIR fibers, in conjunction with recent advances in room temperature quantum cascade lasers (QCL), could provide compact and light-weight transmitter solutions for several critical defense and nuclear non-proliferation needs.

Krishnaswami, Kannan; Qiao, Hong (Amy); Bernacki, Bruce E.; Anheier, Norman C.

2009-04-01T23:59:59.000Z

329

Stabilization of Ballooning Modes by Nonparaxial Cells  

SciTech Connect

An analysis is made of the effect of high-curvature stabilizing nonparaxial elements (cells) on the MHD plasma stability in open confinement systems and in confinement systems with closed magnetic field lines. It is shown that the population of particles trapped in such cells has a stabilizing effect not only on convective (flute) modes but also on ballooning modes, which govern the maximum possible {beta} value. In the kinetic approach, which distinguishes between the effects of trapped and passing particles, the maximum possible {beta} values consistent with stability can be much higher than those predicted by the MHD model.

Arsenin, V.V.; Zvonkov, A.V.; Skovoroda, A.A. [Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, pl. Kurchatova 1, Moscow, 123182 (Russian Federation)

2005-01-15T23:59:59.000Z

330

Self-Similar Modes of Coherent Diffusion  

E-Print Network (OSTI)

Self-similar solutions of the coherent diffusion equation are derived and measured. The set of real similarity solutions is generalized by the introduction of a nonuniform phase surface, based on the elegant Gaussian modes of optical diffraction. In an experiment of light storage in a gas of diffusing atoms, a complex initial condition is imprinted, and its diffusion dynamics is monitored. The self-similarity of both the amplitude and the phase pattern is demonstrated, and an algebraic decay associated with the mode order is measured. Notably, as opposed to a regular diffusion spreading, a self-similar contraction of a special subset of the solutions is predicted and observed.

O. Firstenberg; P. London; D. Yankelev; R. Pugatch; M. Shuker; N. Davidson

2010-08-16T23:59:59.000Z

331

Nonlinear mode coupling analysis in the Tevatron  

SciTech Connect

Increased demand for higher luminosities from Fermilab proton-antiproton collider requires higher intensities and increased number of bunches. The performance of existing 6 x 6 and the proposed 36 x 36 collider is often limited by the non-linear effects arising from beam-beam interactions, in particular for high intensity beams. The tune shifts and spread from increased long range interactions combined with higher order multipoles complicates the frequency spectrum of the particle motions. TEAPOT simulation program is used to generate turn by turn data that could be used in the nonlinear mode spectrums analysis. Bispectral mode analysis is discussed.

Assadi, S.; Mishra, C.S.

1995-08-01T23:59:59.000Z

332

Sandia National Laboratories: Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

of renewable energy technology programs (Wind, Concentrating Solar Power, Geothermal, and Energy Systems Analysis). Transmission Grid Integration Distribution Grid Integration...

333

Integrated Safety Management (ISM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Safety Management Integrated Safety Management Home ISM Policy ISM Champions ISM Workshops Resources Archives Contact Us Health and Safety HSS Logo Integrated Safety Management (ISM) ism logo Welcome to the Department of Energy's Office of Health, Safety and Security (HSS) Integrated Safety Management (ISM) Web Site. The Department and its contractors remain firmly committed to ISM as first defined in 1996. The objective of ISM is to perform work in a safe and environmentally sound manner. More specifically, as described in DOE P 450.4, Safety Management System Policy: "The Department and Contractors must systematically integrate safety into management and work practices at all levels so that missions are accomplished while protecting the public, the worker, and the environment. This is to be accomplished through effective integration of safety management into all facets of work planning and execution." "

334

Modes of Operation: Der Cipher Feedback Steffen Reith  

E-Print Network (OSTI)

Modes of Operation: Der Cipher Feedback Mode (CFB) Steffen Reith 7. Mai 2005 Der CFB-Mode wird Shiftr Bits Shift ic r Bitsr Bits rn n r n n r r Der CFB-Mode 1 Dies ist mit Hilfe der Abbildung leicht

Vollmer, Heribert

335

Head-Tail Modes for Strong Space Charge  

SciTech Connect

Head-tail modes are described here for the space charge tune shift significantly exceeding the synchrotron tune. General equation for the modes is derived. Spatial shapes of the modes, their frequencies, and coherent growth rates are explored. The Landau damping rates are also found. Suppression of the transverse mode coupling instability by the space charge is explained.

Burov, Alexey

2008-12-01T23:59:59.000Z

336

The IMPACTT model: Structure and technical description  

SciTech Connect

The Integrated Market Penetration and Anticipated Cost of Transportation Technologies model, or IMPACTT, is a spreadsheet model that calculates the effect of advanced-technology vehicles and market penetration on baseline fuel use and emissions. Outputs include estimates of the quantity and value of oil displaced and emissions reduced by advanced-technology vehicles, the quantity of alternative fuels they consume, and the total incremental costs bome by purchasers of advanced-technology vehicles. In the current version of IMPACTT, up to eight fuel or engine technologies applicable to light-duty vehicles can be modeled by using a three-phase approach. First, the vehicle stock and miles traveled by the advanced-technology vehicle are determined. Second, assumptions about efficiency and fuel shares are used to estimate substitution-fuel use and oil displacement. Third, changes in emissions of carbon monoxide, non-methane hydrocarbons, nitrogen oxides, and carbon dioxide are computed.

Mintz, M.M.; Tompkins, M.M.; Camp, J.

1994-12-01T23:59:59.000Z

337

Integrated Energy Efficiency  

E-Print Network (OSTI)

10 Off The Grid Sensor Integration Natural Daylight Base and Peak Energy Reduction 11 Lowest Cost Renewable Solar Integrated Lighting $1.0 million/MW $6 – 9 million/MW Wind $1.3 - 1.9 million/MW Biomass $1.5 – 2.5 million/MW Geothermal $1.6 million... 10 Off The Grid Sensor Integration Natural Daylight Base and Peak Energy Reduction 11 Lowest Cost Renewable Solar Integrated Lighting $1.0 million/MW $6 – 9 million/MW Wind $1.3 - 1.9 million/MW Biomass $1.5 – 2.5 million/MW Geothermal $1.6 million...

Heins, S.

338

Graphene Integrated Microwave Photonics  

Science Journals Connector (OSTI)

This paper proposes and analyzes the incorporation of graphene to integrated waveguides and circuits for application to the field of microwave photonics (MWP). We discuss the main...

Capmany, José; Doménech, David; Muñoz, Pascual

2014-01-01T23:59:59.000Z

339

Integrated LED Headlamp Module  

Science Journals Connector (OSTI)

LED headlamp module integrates all necessary optics, electronics, and heat management into one compact unit that fits into standard mechanical headlamp frame. It provides high beam,...

Popelek, Jan

340

Technology Integration Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Integration Overview Dennis A. Smith - Clean Cities Deployment Connie Bezanson - Vehicle Education June 17, 2014 VEHICLE TECHNOLOGIES OFFICE This presentation does not...

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Technology Integration Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

-Technology Integration Overview - Dennis A. Smith Connie Bezanson U. S. Department of Energy Headquarters Office - Washington, D.C. May 2013 Project ID: TI000 2013 Department of...

342

Integrated Technology Deployment  

Office of Energy Efficiency and Renewable Energy (EERE)

Integrated technology deployment is a comprehensive approach to implementing solutions that increase the use of energy efficiency and renewable energy technologies. Federal, state, and local...

343

Zero Net Energy Myths and Modes of Thought  

E-Print Network (OSTI)

usually building integrated photovoltaics. While single-demands. 4. Building integrated photovoltaics (BIPV) are thedioxide emissions. Building integrated photovoltaics are an

Rajkovich, Nicholas B.

2010-01-01T23:59:59.000Z

344

The features of a quantum description of radiation in an optically dense medium  

E-Print Network (OSTI)

This paper is devoted to the theory of quantum electromagnetic field in an optically dense medium. Self-consistent equations describing interaction between a quantum field and a quantum dielectric medium are obtained from the first principles, i.e., outside a phenomenological description. Using these equations, we found a transformation (of the Bogoliubov transformation type) that converts the operators of the "vacuum" field into operators of collective perturbations of the field and an ensemble of atoms, that is, photons in the medium. Transformation parameter is the refractive index of the wave mode considered. It is shown that besides the energy of the collective electromagnetic field, the energy of photons in the medium includes the energy of the internal degrees of freedom of the substance and the energy of near-field dipole interaction between atoms in the polarized medium. The concept of negative energy photons is introduced on the basis of self-consistent equations.

Tokman, M D; Vdovin, V V

2015-01-01T23:59:59.000Z

345

Mode testing via the excess mass estimate  

Science Journals Connector (OSTI)

......right when b i = w i + 1. For the new combined mode rede fi ne the quantities a i and b i as in (A1) except that we...outer bracketing minimisers ' in place of w i and w i + 1. Then rede fi ne E i as E i = P b i a i { f (x) ? l i } + dx, where......

N. I. Fisher; J. S. Marron

2001-06-01T23:59:59.000Z

346

Do red giants have short mode lifetimes?  

E-Print Network (OSTI)

We show evidence that the red giant star ksi Hya has an oscillation mode lifetime, tau, of about 2 days significantly shorter than predicted by theory (tau = 17 days, Houdek & Gough 2002). If this is a general trend of red giants it would limit the prospects of asteroseismology on these stars because of poor coherence of the oscillations.

D. Stello; H. Kjeldsen; T. R. Bedding; D. Buzasi

2005-10-18T23:59:59.000Z

347

Thermionic converter in load-switching mode  

SciTech Connect

An electrical equivalent circuit is proposed for a thermionic electrogenerating element. It is suitable for calculation of transients in load-switching mode. Formulas are given for estimating circuit parameters. A sample numerical calculation is given for the transient between no-load and short-circuit regimes. The results may be employed to identify experimental data in the frequency domain.

Mendel'baum, M.A.; Es'kov, V.D.

1983-01-01T23:59:59.000Z

348

HYDROGEN LOCAL VIBRATIONAL MODES IN COMPOUND SEMICONDUCTORS  

E-Print Network (OSTI)

HYDROGEN LOCAL VIBRATIONAL MODES IN COMPOUND SEMICONDUCTORS M.D. MCCLUSKEY* University) spectroscopy of hydrogen and deuterium in GaP, AlSb, ZnSe, and GaN has provided important information about the structures of dopant- hydrogen complexes and their interaction with the host lattice. In GaN:Mg, for example

McCluskey, Matthew

349

Triangular-profile single-mode fiber  

Science Journals Connector (OSTI)

A low-loss triangular-profile single-mode fiber is reported. The fiber loss at 1.3–1.55-?m wavelengths is below 0.4 dB/km, and its zero-chromatic-dispersion wavelength is 1.402 ?m.

Saifi, M A; Cohen, L G; Stone, J; Jang, S J

1982-01-01T23:59:59.000Z

350

Pulses inside the pulse mode of operation at RF Gun  

E-Print Network (OSTI)

Pulses inside the pulse mode of operation at RF Gun V. Vogel, V. Ayvazyan, K. Floettmann, D. Lipka a PiP mode of operation at RF Gun · What we need, to operate FLASH in the PiP mode · PiP study-Universitaet Bochum) Alternative: SC GUN DC GUN Cold GUN in PiP mode Cold Traveling wave GUN Why we need a PiP mode

351

4-H Horse Advisory Committee Member Service Description And Agreement  

E-Print Network (OSTI)

. Responsibilities · Follow all guidelines and policies of University of New Hampshire Cooperative Extension 4-H4-H Horse Advisory Committee Member Service Description And Agreement Purpose · To serve to the scope of the duties defined in this service description. Accountable to Extension staff

New Hampshire, University of

352

STAFF POSITION DESCRIPTION SAN JOSE STA TE HUMAN RESOURCES  

E-Print Network (OSTI)

STAFF POSITION DESCRIPTION SAN JOSE STA TE HUMAN RESOURCES UNIVERSITY Workforce Planning l: 408-924-2250 I408-924-1784 (fax) Job Description Staff Date: Workforce Planning, Human Resources (Name [Workforce Planning reviews the CSU classification standards with essential duties of the positions] F

Su, Xiao

353

Description Logics as Ontology Languages for the Semantic Web  

E-Print Network (OSTI)

Description Logics as Ontology Languages for the Semantic Web Franz Baader 1 , Ian Horrocks 2. The vision of a Semantic Web has recently drawn consider- able attention, both from academia and industry. Description logics are often named as one of the tools that can support the Semantic Web and thus help to make

Baader, Franz

354

SUMMARY PLAN DESCRIPTION Plan Name: MCWAH Vision Plan [Plan # 505  

E-Print Network (OSTI)

to pay for such coverage. Review this summary plan description and the documents governing the planSUMMARY PLAN DESCRIPTION Plan Name: MCWAH Vision Plan [Plan # 505] Plan Type: Group Vision Insurance Plan Year: July 1 ­ June 30 Employer\\Policyholder\\Plan Administrator\\Plan Sponsor: Medical College

355

System Management Ontology Description Logic Formalization of CIM  

E-Print Network (OSTI)

SMO System Management Ontology Description Logic Formalization of CIM Andrea Cal`i, Diego Calvanese Information Model (CIM) has the goal of providing a suitable approach for modeling systems and networks using the object-oriented paradigm. In this document we illustrate how to map CIM onto an expressive Description

Calvanese, Diego

356

2012 Graduate School of Science Current Course Descriptions Common Courses  

E-Print Network (OSTI)

, and social issues (ELSI) as well as cases of bioethics, climate change and nuclear power. https2012 Graduate School of Science Current Course Descriptions Common Courses Science Communication Courses Course code Course title Instructor Course Description 35620-2001 Theory of Science Communication

Sano, Masaki

357

UO{sub 3} plant turnover - facility description document  

SciTech Connect

This document was developed to provide a facility description for those portions of the UO{sub 3} Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI.

Clapp, D.A.

1995-01-01T23:59:59.000Z

358

Review article FUSSIM2: brief description of the simulation model  

E-Print Network (OSTI)

Review article FUSSIM2: brief description of the simulation model and application to fertigation zone, which may be harmful to crop development. A two-dimensional simulation model for the above-dimensional simulation model Résumé ­ FUSSIM2 : brève description du modèle de simulation et application aux scenari de

Paris-Sud XI, Université de

359

Description and Simulation of Gust Front Wind Field Lijuan Wanga  

E-Print Network (OSTI)

-stationarity of the wind field associated with these extreme events poses serious challenges in their modelingDescription and Simulation of Gust Front Wind Field Lijuan Wanga , Ahsan Kareemb a Nat front wind field is proposed based on the time-frequency description of the wind field. Traditionally

Kareem, Ahsan

360

FCT Technology Validation: Integrated Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Projects to Integrated Projects to someone by E-mail Share FCT Technology Validation: Integrated Projects on Facebook Tweet about FCT Technology Validation: Integrated Projects on Twitter Bookmark FCT Technology Validation: Integrated Projects on Google Bookmark FCT Technology Validation: Integrated Projects on Delicious Rank FCT Technology Validation: Integrated Projects on Digg Find More places to share FCT Technology Validation: Integrated Projects on AddThis.com... Home Transportation Projects Stationary/Distributed Generation Projects Integrated Projects DOE Projects Non-DOE Projects Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Manufacturing Codes & Standards Education Systems Analysis Contacts Integrated Projects To maximize overall system efficiencies, reduce costs, and optimize

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

MHD Integrated Topping Cycle Project  

SciTech Connect

This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

Not Available

1992-02-01T23:59:59.000Z

362

Descriptive Model of a Generic WAMS | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS The Department of Energy's (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation's electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study. Descriptive Model of a Generic WAMS More Documents & Publications Securing Wide Area Measurement Systems 2012 Advanced Applications Research & Development Peer Review - Day 1

363

Modular Integrated Energy Systems  

E-Print Network (OSTI)

Honeywell #12;Modular Integrated Energy Systems Task 5 Prototype Development Reference Design DocumentationModular Integrated Energy Systems Prepared for: Oak Ridge National Laboratory P.O. Box 2008 Building 3147 Oak Ridge, TN 37831 April 27, 2006 Prepared by: Honeywell Laboratories 3660 Technology Drive

Oak Ridge National Laboratory

364

Systems Integration (Fact Sheet)  

SciTech Connect

The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

Not Available

2011-10-01T23:59:59.000Z

365

Field theoretic description of charge regulation interaction  

E-Print Network (OSTI)

In order to find the exact form of the electrostatic interaction between two proteins with dissociable charge groups in aqueous solution, we have studied a model system composed of two macroscopic surfaces with charge dissociation sites immersed in a counterion-only ionic solution. Field-theoretic representation of the grand canonical partition function is derived and evaluated within the mean-field approximation, giving the Poisson-Boltzmann theory with the Ninham-Parsegian boundary condition. Gaussian fluctuations around the mean-field are then analyzed in the lowest order correction that we calculate analytically and exactly, using the path integral representation for the partition function of a harmonic oscillator with time-dependent frequency. The first order (one loop) free energy correction gives the interaction free energy that reduces to the zero-frequency van der Waals form in the appropriate limit but in general gives rise to a mono-polar fluctuation term due to charge fluctuation at the dissociation sites. Our formulation opens up the possibility to investigate the Kirkwood-Shumaker interaction in more general contexts where their original derivation fails.

Natasa Adzic; Rudolf Podgornik

2014-05-15T23:59:59.000Z

366

Robotics for mixed waste operations, demonstration description  

SciTech Connect

The Department of Energy (DOE) Office of Technology Development (OTD) is developing technology to aid in the cleanup of DOE sites. Included in the OTD program are the Robotics Technology Development Program and the Mixed Waste Integrated Program. These two programs are working together to provide technology for the cleanup of mixed waste, which is waste that has both radioactive and hazardous constituents. There are over 240,000 cubic meters of mixed low level waste accumulated at DOE sites and the cleanup is expected to generate about 900,000 cubic meters of mixed low level waste over the next five years. This waste must be monitored during storage and then treated and disposed of in a cost effective manner acceptable to regulators and the states involved. The Robotics Technology Development Program is developing robotics technology to make these tasks safer, better, faster and cheaper through the Mixed Waste Operations team. This technology will also apply to treatment of transuranic waste. The demonstration at the Savannah River Site on November 2-4, 1993, showed the progress of this technology by DOE, universities and industry over the previous year. Robotics technology for the handling, characterization and treatment of mixed waste as well robotics technology for monitoring of stored waste was demonstrated. It was shown that robotics technology can make future waste storage and waste treatment facilities better, faster, safer and cheaper.

Ward, C.R.

1993-11-01T23:59:59.000Z

367

Benchmarking kinetic calculations of resistive wall mode stability  

SciTech Connect

Validating the calculations of kinetic resistive wall mode (RWM) stability is important for confidently predicting RWM stable operating regions in ITER and other high performance tokamaks for disruption avoidance. Benchmarking the calculations of the Magnetohydrodynamic Resistive Spectrum—Kinetic (MARS-K) [Y. Liu et al., Phys. Plasmas 15, 112503 (2008)], Modification to Ideal Stability by Kinetic effects (MISK) [B. Hu et al., Phys. Plasmas 12, 057301 (2005)], and Perturbed Equilibrium Nonambipolar Transport (PENT) [N. Logan et al., Phys. Plasmas 20, 122507 (2013)] codes for two Solov'ev analytical equilibria and a projected ITER equilibrium has demonstrated good agreement between the codes. The important particle frequencies, the frequency resonance energy integral in which they are used, the marginally stable eigenfunctions, perturbed Lagrangians, and fluid growth rates are all generally consistent between the codes. The most important kinetic effect at low rotation is the resonance between the mode rotation and the trapped thermal particle's precession drift, and MARS-K, MISK, and PENT show good agreement in this term. The different ways the rational surface contribution was treated historically in the codes is identified as a source of disagreement in the bounce and transit resonance terms at higher plasma rotation. Calculations from all of the codes support the present understanding that RWM stability can be increased by kinetic effects at low rotation through precession drift resonance and at high rotation by bounce and transit resonances, while intermediate rotation can remain susceptible to instability. The applicability of benchmarked kinetic stability calculations to experimental results is demonstrated by the prediction of MISK calculations of near marginal growth rates for experimental marginal stability points from the National Spherical Torus Experiment (NSTX) [M. Ono et al., Nucl. Fusion 40, 557 (2000)].

Berkery, J. W.; Sabbagh, S. A. [Department of Applied Physics and Applied Mathematics, Columbia University, New York, New York 10027 (United States)] [Department of Applied Physics and Applied Mathematics, Columbia University, New York, New York 10027 (United States); Liu, Y. Q. [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom)] [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Wang, Z. R.; Logan, N. C.; Park, J.-K.; Manickam, J. [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States); Betti, R. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)] [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)

2014-05-15T23:59:59.000Z

368

Field Quantization, Photons and Non-Hermitean Modes  

E-Print Network (OSTI)

Field quantization in three dimensional unstable optical systems is treated by expanding the vector potential in terms of non-Hermitean (Fox-Li) modes in both the cavity and external regions. The cavity non-Hermitean modes (NHM) are treated using the paraxial and monochromaticity approximations. The NHM bi-orthogonality relationships are used in a standard canonical quantization procedure based on introducing generalised coordinates and momenta for the electromagnetic (EM) field. The quantum EM field is equivalent to a set of quantum harmonic oscillators (QHO), associated with either the cavity or the external region NHM. This confirms the validity of the photon model in unstable optical systems, though the annihilation and creation operators for each QHO are not Hermitean adjoints. The quantum Hamiltonian for the EM field is the sum of non-commuting cavity and external region contributions, each of which is sum of independent QHO Hamiltonians for each NHM, but the external field Hamiltonian also includes a coupling term responsible for external NHM photon exchange processes. Cavity energy gain and loss processes is associated with the non-commutativity of cavity and external region operators, given in terms of surface integrals involving cavity and external region NHM functions on the cavity-external region boundary. The spontaneous decay of a two-level atom inside an unstable cavity is treated using the essential states approach and the rotating wave approximation. Atomic transitions leading to cavity NHM photon absorption have a different coupling constant to those leading to photon emission, a feature resulting from the use of NHM functions. Under certain conditions the decay rate is enhanced by the Petermann factor.

S. A. Brown; B. J. Dalton

2001-09-10T23:59:59.000Z

369

Semantic requirements for an integrated bill of materials syste  

E-Print Network (OSTI)

(V). . 3. 2. 5. 2 Existential Quantifier (3). Page 23 24 24 25 . 25 25 IV THE BOM: DEFIMHON AND DEVELOPMENT. . 4. 1 Introduction. . 4. 2 Description of BOM. . 4. 3 BOM Classification. . . 4. 4 Ontology of BOMS. 4. 4. 1 Objects in BOMS 4... classes of users. The need for an integrated representation scheme is then identified. Next, we characterize the ontology (object kinds and relations) in the domain of such an integrated BOMS that can support the requirements of the different users...

Anupindi, Sharma Rambhadra

2012-06-07T23:59:59.000Z

370

Low Dimensional Description of Pedestrian-Induced Oscillation of the Millennium Bridge  

E-Print Network (OSTI)

When it opened to pedestrian traffic in the year 2000, London's Millennium Bridge exhibited an unwanted, large, side-to-side oscillation which was apparently due to a resonance between the stepping frequency of walkers and one of the bridge modes. Models for this event, and similar events on other bridges, have been proposed. The model most directly addressing the synchronization mechanism of individual walkers and the resulting global response of the bridge-pedestrian system is one developed by Eckhardt et al. This model treats individual walkers with a phase oscillator description and is inherently high dimensional with system dimensionality (N+2), where N is the number of walkers. In the present work we use a method proposed by Ott and Antonsen to reduce the model of Eckhardt et al. to a low dimensional dynamical system, and we employ this reduced description to study the global dynamics of the bridge/pedestrian interaction. More generally, this treatment serves as an interesting example of the possibility of low dimensional macroscopic behavior in large systems of coupled oscillators.

Mahmoud M. Abdulrehem; Edward Ott

2008-09-02T23:59:59.000Z

371

Hamiltonian description of low frequency waves propagation and absorption in magnetically confined plasmas  

SciTech Connect

Magnetically confined fusion plasmas feature a large variety of waves. In the Ion Cyclotron Range of Frequencies (ICRF), radiofrequency waves are routinely used for plasma heating and non-inductive current-drive, whereas unstable modes in the Alfven range of frequencies are observed in ongoing experiments and are expected to play a crucial role in future devices. In experiments where Alfven and ICRF waves co-exist, a strong interplay between them is observed via the intermediary of the wave accelerated fast ions. A Hamiltonian description of the resonating particles is particularly well adapted to describe accurately their interaction with ICRF and Alfven waves. It provides a convenient framework for self-consistent calculations of the wave propagation and the kinetics of resonating plasma species. In the wave-field calculation, this formulation allows to account for non-local effects caused by wide fast particle orbits (e.g. wave accelerated fast ions and alpha particles). We present here the progress made in the development of the full-wave code EVE, based on a Hamiltonian description of the particle dynamics in terms of action-angle variables. The formalism of EVE, the numerical aspects, as well as some simulation results obtained with the code are discussed.

Dumont, R. J.; Eriksson, L.-G. [Association Euratom-CEA, CEA/DSM/DRFC, Centre de Cadarache, 13108 Saint-Paul-lez-Durance (France)

2006-11-30T23:59:59.000Z

372

Mode-synthesizing atomic force microscopy and mode-synthesizing sensing  

DOE Patents (OSTI)

A method of analyzing a sample that includes applying a first set of energies at a first set of frequencies to a sample and applying, simultaneously with the applying the first set of energies, a second set of energies at a second set of frequencies, wherein the first set of energies and the second set of energies form a multi-mode coupling. The method further includes detecting an effect of the multi-mode coupling.

Passain, Ali; Thundat, Thomas George; Tetard, Laurene

2014-07-22T23:59:59.000Z

373

Variable speed wind turbine for maximum power capture using adaptive fuzzy integral sliding mode control  

Science Journals Connector (OSTI)

This paper presents a nonlinear control approach to variable speed wind turbine (VSWT) with a wind speed estimator. The dynamics of the wind turbine (WT) is derived from single ... has been considered for exact e...

Saravanakumar Rajendran…

2014-06-01T23:59:59.000Z

374

Design and Implementation of Switching Voltage Integrated Circuits Based on Sliding Mode Control  

E-Print Network (OSTI)

concerning very high efficiency circuits with very high performance specifications. The first topic is the design and implementation of class D audio power amplifiers, keeping their inherent high efficiency characteristic while improving their linearity... of Mexico (CONACYT) for the economic support during most of my doctoral studies. viii TABLE OF CONTENTS CHAPTER Page I INTRODUCTION : : : : : : : : : : : : : : : : : : : : : : : : : : 1 A. Class D Audio Power Amplifiers . . . . . . . . . . . . . . . . . 1 B...

Rojas Gonzalez, Miguel Angel

2010-10-12T23:59:59.000Z

375

Electron acceleration by Z-mode and whistler-mode waves  

SciTech Connect

We carried out a series of particle simulations to study electron acceleration by Z-mode and whistler-mode waves generated by an electron ring distribution. The electron ring distribution leads to excitations of X-mode waves mainly in the perpendicular direction, Z-mode waves in the perpendicular and parallel directions, and whistler-mode waves mainly in the parallel direction. The parallel Z- and whistler-mode waves can lead to an effective acceleration of ring electrons. The electron acceleration is mainly determined by the wave amplitude and phase velocity, which in turn is affected by the ratio of electron plasma to cyclotron frequencies. For the initial kinetic energy ranging from 100 to 500 keV, the peak energy of the accelerated electrons is found to reach 2–8 times the initial kinetic energy. We further study the acceleration process by test-particle calculations in which electrons interact with one, two, or four waves. The electron trajectories in the one-wave case are simple diffusion curves. In the multi-wave cases, electrons are accelerated simultaneously by counter-propagating waves and can have a higher final energy.

Lee, K. H. [Institute of Space Science, National Central University, Zhongli, Taiwan (China)] [Institute of Space Science, National Central University, Zhongli, Taiwan (China); Omura, Y. [Research Institute for Sustainable Humanosphere, Kyoto University, Uji, Kyoto (Japan)] [Research Institute for Sustainable Humanosphere, Kyoto University, Uji, Kyoto (Japan); Lee, L. C. [Institute of Space Science, National Central University, Zhongli, Taiwan (China) [Institute of Space Science, National Central University, Zhongli, Taiwan (China); Institute of Earth Science, Academia Sinica, Nankang, Taiwan (China)

2013-11-15T23:59:59.000Z

376

Adaptive second order sliding mode control of doubly fed induction generator in wind energy conversion system  

Science Journals Connector (OSTI)

A dynamic synchronous d-q reference frame based modeling and a novel adaptive higher order sliding mode control theory for doubly fed induction generator (DFIG) based wind energy conversion system (WECS) have been proposed in this paper. As depicted from the literature the sliding mode control strategy involving computation of converter currents introduces some inaccuracies for optimal extraction of the power references of the DFIG. On the contrary the proposed method contributes with some important features such as chatter-free performance and heftiness in terms of transient response of the non-linear systems subjected to dynamic conditions such as lower and higher wind speeds. Consequently a higher order sliding mode controller using the active and reactive power of the DFIG as controller inputs has been proposed in this paper. As compared with the other two methods the proposed higher order sliding mode power control souvenirs a significantly improved as well as stable performance of the DFIG based WECS in terms of reduced settling time as well as quickly damping out the oscillations exhibited by the system. The robustness and stability of the proposed control strategy has been validated in MATLAB environment in terms of the comparison of its performance with traditional proportional-integral and existing first-order sliding mode controller (employing converter current as input) subjected to a wide range of disturbances for sub and super synchronous mode of operation of the DFIG subjected to lower and higher wind speeds along with the available practical wind speed data as depicted in the simulation and result section.

2014-01-01T23:59:59.000Z

377

Engineering integrated pure narrow-band photon sources  

E-Print Network (OSTI)

Engineering and controlling well defined states of light for quantum information applications is of increasing importance as the complexity of quantum systems grows. For example, in quantum networks high multi-photon interference visibility requires properly devised single mode sources. In this paper we propose a spontaneous parametric down conversion source based on an integrated cavity-waveguide, where single narrow-band, possibly distinct, spectral modes for the idler and the signal fields can be generated. This mode selection takes advantage of the clustering effect, due to the intrinsic dispersion of the nonlinear material. In combination with a CW laser and fast detection, our approach provides a means to engineer a source that can efficiently generate pure photons, without filtering, that is compatible with long distance quantum communication. Furthermore, it is extremely flexible and could easily be adapted to a wide variety of wavelengths and applications.

Enrico Pomarico; Bruno Sanguinetti; Clara I. Osorio; Harald Herrmann; Rob Thew

2011-08-29T23:59:59.000Z

378

OBSERVED DAMPING OF THE SLOW MAGNETOACOUSTIC MODE  

SciTech Connect

Spectroscopic and stereoscopic imaging observations of slow magnetoacoustic wave propagation within a coronal loop are investigated to determine the decay length scale of the slow magnetoacoustic mode in three dimensions and the density profile within the loop system. The slow wave is found to have an e-folding decay length scale of 20,000{sup +4000}{sub -3000} km with a uniform density profile along the loop base. These observations place quantitative constraints on the modeling of wave propagation within coronal loops. Theoretical forward modeling suggests that magnetic field line divergence is the dominant damping factor and thermal conduction is insufficient, given the observed parameters of the coronal loop temperature, density, and wave mode period.

Marsh, M. S.; Walsh, R. W. [Jeremiah Horrocks Institute for Astrophysics and Supercomputing, University of Central Lancashire, Preston PR1 2HE (United Kingdom); De Moortel, I., E-mail: mike.s.marsh@gmail.com, E-mail: mmarsh@uclan.ac.uk [School of Mathematics and Statistics, University of St Andrews, St Andrews KY16 9SS (United Kingdom)

2011-06-20T23:59:59.000Z

379

Geodesic stability, Lyapunov exponents and quasinormal modes  

E-Print Network (OSTI)

Geodesic motion determines important features of spacetimes. Null unstable geodesics are closely related to the appearance of compact objects to external observers and have been associated with the characteristic modes of black holes. By computing the Lyapunov exponent, which is the inverse of the instability timescale associated with this geodesic motion, we show that, in the eikonal limit, quasinormal modes of black holes in any dimensions are determined by the parameters of the circular null geodesics. This result is independent of the field equations and only assumes a stationary, spherically symmetric and asymptotically flat line element, but it does not seem to be easily extendable to anti-de Sitter spacetimes. We further show that (i) in spacetime dimensions greater than four, equatorial circular timelike geodesics in a Myers-Perry black hole background are unstable, and (ii) the instability timescale of equatorial null geodesics in Myers-Perry spacetimes has a local minimum for spacetimes of dimension d > 5.

Vitor Cardoso; Alex S. Miranda; Emanuele Berti; Helvi Witek; Vilson T. Zanchin

2009-03-12T23:59:59.000Z

380

Tensor modes on the string theory landscape  

E-Print Network (OSTI)

We attempt an estimate for the distribution of the tensor mode fraction $r$ over the landscape of vacua in string theory. The dynamics of eternal inflation and quantum tunneling lead to a kind of democracy on the landscape, providing no bias towards large-field or small-field inflation regardless of the class of measure. The tensor mode fraction then follows the number frequency distributions of inflationary mechanisms of string theory over the landscape. We show that an estimate of the relative number frequencies for small-field vs large-field inflation, while unattainable on the whole landscape, may be within reach as a regional answer for warped Calabi-Yau flux compactifications of type IIB string theory.

Alexander Westphal

2012-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Waste Emplacement/Retrieval System Description Document  

SciTech Connect

The Waste Emplacement/Retrieval System transports Waste Packages (WPs) from the Waste Handling Building (WHB) to the subsurface area of emplacement, and emplaces the WPs once there. The system also, if necessary, removes some or all of the WPs from the underground and transports them to the surface. Lastly, the system is designed to remediate abnormal events involving the portions of the system supporting emplacement or retrieval. During emplacement operations, the system operates on the surface between the WHB and North Portal, and in the subsurface in the North Ramp, access mains, and emplacement drifts. During retrieval or abnormal conditions, the operations areas may also extend to a surface retrieval storage site and South Portal on the surface, and the South Ramp in the subsurface. A typical transport and emplacement operation involves the following sequence of events. A WP is loaded into a WP transporter at the WHB, and coupled to a pair of transport locomotives. The locomotives transport the WP from the WHB, down the North Ramp, and to the entrance of an emplacement drift. Once docked at the entrance of the emplacment drift, the WP is moved outside of the WP transporter, and engaged by a WP emplacement gantry. The gantry lifts the WP, and transports it to its emplacement location, where the WP is then lowered to its final resting position. The gantry remains in the drift while the WP transporter is returned to the WHB by the locomotives. When the transporter reaches the WHB, the sequence of operations is repeated. Retrieval of all the WPs, or a large group of WPs, under normal conditions is achieved by reversing the emplacement operations. Retrieval of a small set of WPs, under normal or abnormal conditions, is known as recovery. Recovery performed under abnormal conditions will involve a suite of specialized equipment designed to perform a variety of tasks to enable the recovery process. Recovery after abnormal events may require clearing of equipment, rock, and ground support to facilitate recovery operations. Stabilization of existing ground support and installation of new ground support may also be needed. Recovery of WPs after an event that has contaminated drifts and/or WPs will require limiting the spread of contamination. Specialized equipment will also be necessary for system restoration. The system interfaces with the Subsurface Facility System and Ground Control System for the size and layout of the underground openings. The system interfaces with the Subsurface Ventilation System for the emplacement drift operating environment and the size of the drift isolation doors. The system interfaces with all WP types for the size, weight, and other important parameters affecting emplacement, recovery, and retrieval. The system interfaces with the Subsurface Emplacement Transportation System for the rail system upon which it operates and the distribution of power throuch the rail system. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for the transmission of data to and from the system equipment, and for remote control of system equipment. The system interfaces with the Ground Control System for any repairs that are made. The system interfaces with the Emplacement Drift System for the WP emplacement mode and hardware. The system interfaces with the Disposal Container Handling System and the Waste Handling Building System for the receipt (during emplacement) and delivery (during retrieval/recovery) of WPs.

NONE

2000-10-12T23:59:59.000Z

382

Waste Emplacement/Retrieval System Description Document  

SciTech Connect

The Waste Emplacement/Retrieval System transports Waste Packages (WPs) from the Waste Handling Building (WHB) to the subsurface area of emplacement, and emplaces the WPs once there. The Waste Emplacement/Retrieval System also, if necessary, removes some or all of the WPs from the underground and transports them to the surface. Lastly, the system is designed to remediate abnormal events involving the portions of the system supporting emplacement or retrieval. During emplacement operations, the system operates on the surface between the WHB and North Portal, and in the subsurface in the North Ramp, access mains, and emplacement drifts. During retrieval or abnormal conditions, the operations areas may also extend to a surface retrieval storage site and South Portal on the surface, and the South Ramp in the subsurface. A typical transport and emplacement operation involves the following sequence of events. A WP is loaded into a WP transporter at the WHB, and coupled to a pair of transport locomotives. The locomotives transport the WP from the WHB, down the North Ramp, and to the entrance of an emplacement drift. Once docked at the entrance of the emplacement drift, the WP is moved outside of the WP transporter, and engaged by a WP emplacement gantry. The WP emplacement gantry lifts the WP, and transports it to its emplacement location, where the WP is then lowered to its final resting position. The WP emplacement gantry remains in the drift while the WP transporter is returned to the WHB by the locomotives. When the transporter reaches the WHB, the sequence of operations is repeated. Retrieval of all the WPs, or a large group of WPs, under normal conditions is achieved by reversing the emplacement operations. Retrieval of a small set of WPs, under normal or abnormal conditions, is known as recovery. Recovery performed under abnormal conditions will involve a suite of specialized equipment designed to perform a variety of tasks to enable the recovery process. Recovery after abnormal events may require clearing of equipment, rock, and ground support to facilitate recovery operations. Stabilization of existing ground support and installation of new ground support may also be needed. Recovery of WP(s) after an event that has contaminated drifts and/or WPs will require limiting the spread of contamination. Specialized equipment will also be necessary for system restoration (e.g., after a derailment, component failure). The Waste Emplacement/Retrieval System interfaces with the Subsurface Facility System and Ground Control System for the size and layout of the underground openings. The system interfaces with the Subsurface Ventilation System for the emplacement drift operating environment and the size of the drift isolation doors. The system interfaces with all WP types for the size, weight, and other important parameters affecting emplacement, recovery, and retrieval. The system interfaces with the Subsurface Emplacement Transportation System for the rail system upon which it operates and the distribution of power through the rail system. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for the transmission of data to and from the system equipment, and for remote control of system equipment. The system interfaces with the Ground Control System for any repairs that are made. The system interfaces with the Emplacement Drift System for the WP emplacement mode and hardware. The system interfaces with the Disposal Container Handling System and the Waste Handling Building System for the receipt (during emplacement) and delivery (during retrieval/recovery) of WPs.

Eric Loros

2001-07-25T23:59:59.000Z

383

PEV Integration with Renewables (Presentation)  

SciTech Connect

This presentation discusses current research at NREL on integrating plug-in electric vehicles with the grid and using renewable energy to charge the grid. The Electric Vehicle Grid Integration (EVGI) and Integrated Network Testbed for Energy Grid Research and Technology Experimentation (INTEGRATE) are addressing the opportunities and technical requirements for vehicle grid integration that will increase marketability and lead to greater petroleum reduction.

Markel, T.

2014-06-18T23:59:59.000Z

384

??? Decay Mode of Neutral K Mesons  

Science Journals Connector (OSTI)

The decay K??++?-+?, ??e++e- has been observed in the film of the UCRL 72-in. hydrogen bubble chamber exposed to a beam of 1325-MeV/c momentum negative pions. This event unambiguously fits only the decay mode K??+?+?, but because the K's life span is almost exactly one K10 lifetime it is impossible to say whether it is a direct ??? or inner bremsstrahlung accompanying normal K10?2? decay.

D. Stern

1962-10-01T23:59:59.000Z

385

Stabilizing windings for tilting and shifting modes  

DOE Patents (OSTI)

This invention relates to passive conducting loops for stabilizing a plasma ring against unstable tilting and/or shifting modes. To this end, for example, plasma ring in a spheromak is stabilized by a set of four figure-8 shaped loops having one pair on one side of the plasma and one pair on the other side with each pair comprising two loops whose axes are transverse to each other.

Jardin, Stephen C. (Princeton, NJ); Christensen, Uffe R. (Princeton, NJ)

1984-01-01T23:59:59.000Z

386

SWEPP PAN assay system uncertainty analysis: Active mode measurements of solidified aqueous sludge waste  

SciTech Connect

The Idaho National Engineering and Environmental Laboratory is being used as a temporary storage facility for transuranic waste generated by the US Nuclear Weapons program at the Rocky Flats Plant (RFP) in Golden, Colorado. Currently, there is a large effort in progress to prepare to ship this waste to the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. In order to meet the TRU Waste Characterization Quality Assurance Program Plan nondestructive assay compliance requirements and quality assurance objectives, it is necessary to determine the total uncertainty of the radioassay results produced by the Stored Waste Examination Pilot Plant (SWEPP) Passive Active Neutron (PAN) radioassay system. This paper is one of a series of reports quantifying the results of the uncertainty analysis of the PAN system measurements for specific waste types and measurement modes. In particular this report covers active mode measurements of weapons grade plutonium-contaminated aqueous sludge waste contained in 208 liter drums (item description codes 1, 2, 7, 800, 803, and 807). Results of the uncertainty analysis for PAN active mode measurements of aqueous sludge indicate that a bias correction multiplier of 1.55 should be applied to the PAN aqueous sludge measurements. With the bias correction, the uncertainty bounds on the expected bias are 0 {+-} 27%. These bounds meet the Quality Assurance Program Plan requirements for radioassay systems.

Blackwood, L.G.; Harker, Y.D.; Meachum, T.R.

1997-12-01T23:59:59.000Z

387

Terahertz bandwidth integrated radio frequency spectrum analyzer via nonlinear optics  

E-Print Network (OSTI)

We report an integrated all-optical radio frequency spectrum analyzer based on a ~ 4cm long doped silica glass waveguide, with a bandwidth greater than 2.5 THz. We use this device to characterize the intensity power spectrum of ultrahigh repetition rate mode-locked lasers at repetition rates up to 400 GHz, and observe dynamic noise related behavior not observable with other techniques.

Ferrera, Marcello; Pasquazi, Alessia; Peccianti, Marco; Clerici, Matteo; Caspani, Lucia; Chu, Sai T; Little, Brent E; Morandotti, Roberto; Moss, David J

2014-01-01T23:59:59.000Z

388

NREL: Distributed Grid Integration - Solar Distributed Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Distributed Grid Integration Projects Solar Distributed Grid Integration Projects NREL provides grid integration support, system-level testing, and systems analysis for DOE's Solar Distributed Grid Integration Projects supported by the SunShot Initiative. These projects address technical issues and develop solutions for high penetration grid integration of solar technologies into the electric power system to meet the following goals: Reduce cost: reduce interconnection costs by developing streamlined procedures including advanced integration models for utility interconnection of photovoltaics (PV) Reduce market barriers: work with utilities and system integrators to reduce market barriers by providing research on impacts of integration of high penetration of PV systems and developing solutions.

389

The Advanced Microgrid: Integration and Integration and Interoperabili...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advanced Microgrid: Integration and Integration and Interoperability (March 2014) This white paper provides a synopsis of many elements of microgrid component technologies and...

390

Wellbore Integrity Network  

SciTech Connect

In this presentation, we review the current state of knowledge on wellbore integrity as developed in the IEA Greenhouse Gas Programme's Wellbore Integrity Network. Wells are one of the primary risks to the successful implementation of CO{sub 2} storage programs. Experimental studies show that wellbore materials react with CO{sub 2} (carbonation of cement and corrosion of steel) but the impact on zonal isolation is unclear. Field studies of wells in CO{sub 2}-bearing fields show that CO{sub 2} does migrate external to casing. However, rates and amounts of CO{sub 2} have not been quantified. At the decade time scale, wellbore integrity is driven by construction quality and geomechanical processes. Over longer time-scales (> 100 years), chemical processes (cement degradation and corrosion) become more important, but competing geomechanical processes may preserve wellbore integrity.

Carey, James W. [Los Alamos National Laboratory; Bachu, Stefan [Alberta Innovates

2012-06-21T23:59:59.000Z

391

Energy Systems Integration  

Energy.gov (U.S. Department of Energy (DOE))

Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers the National Renewable Energy Laboratory's Energy Systems Integration Facility (ESIF) and its capabilities.

392

Discrete Hamiltonian variational integrators  

Science Journals Connector (OSTI)

......Journal of Numerical Analysis (2011) 31, 1497-1532 doi:10.1093/imanum/drq027 Advance Access publication on March 17, 2011 Discrete Hamiltonian variational integrators MELVIN LEOK Department of Mathematics, University of California, San......

Melvin Leok; Jingjing Zhang

2011-10-01T23:59:59.000Z

393

Enabling Processes and Integration  

Science Journals Connector (OSTI)

Integrating a process on a chip requires a thorough and, throughout the development cycle, continuous understanding of how it will be applied. This includes the definition of a set of required components, comp...

2009-01-01T23:59:59.000Z

394

Integrable quantum mappings  

Science Journals Connector (OSTI)

A quantum R-matrix structure is presented for a family of exactly integrable multidimensional rational mappings related to lattice versions of the Korteweg–de Vries equation. It is shown that these mappings possess a commuting family of invariants.

F. W. Nijhoff; H. W. Capel; V. G. Papageorgiou

1992-08-15T23:59:59.000Z

395

Characterization of core and edge turbulence in L- and enhanced D{sub {alpha}} H-mode Alcator C-Mod plasmas  

SciTech Connect

The recently upgraded phase-contrast imaging (PCI) diagnostic is used to characterize the transition from the low (L) to the enhanced D{sub {alpha}} (EDA) high (H) confinement mode in Alcator C-Mod [I. H. Hutchinson, R. Boivin, F. Bombarda et al., Phys. Plasmas 1, 1511 (1994)] plasmas. PCI yields information on line integrated density fluctuations along vertical chords. The number of channels has been increased from 12 to 32 and the sampling rate from 1 MHz to 10 MHz. This expansion of diagnostic capabilities is used to study broadband turbulence in L and EDA H mode and to analyze the quasicoherent (QC) mode associated with EDA H mode. Changes in broadband turbulence at the transition from L to EDA H mode can be interpreted as an effect of the Doppler rotation of the bulk plasma. Additional fluctuation measurements of D{sub {alpha}} light and the poloidal magnetic field show features correlated with PCI in two different frequency ranges at the transition. The backtransition from EDA H to L mode, the so-called enhanced neutron (EN) mode, is investigated by new high frequency (132 and 140 GHz) reflectometer channels operating in the ordinary (O) mode. This additional hardware has been installed in an effort to study localized turbulence associated with internal transport barriers (ITBs). The EN mode is a suitable candidate for this study, since an ITB exists transiently as the outer density decreases much faster than the core density in this mode. The fact that the density decays from the outside inward allows us to study fluctuations progressing towards the plasma core. Our results mark the first localized observation of the QC mode at medium density: 2.2x10{sup 20} m{sup -3} (132 GHz). Correlating the reflectometry measurements with other fluctuating quantities provides some insight regarding the causality of the EN-mode development.

Basse, N.P.; Edlund, E.M.; Ernst, D.R.; Fiore, C.L.; Greenwald, M.J.; Hubbard, A.E.; Hughes, J.W.; Irby, J.H.; Lin, L.; Lin, Y.; Marmar, E.S.; Mossessian, D.A.; Porkolab, M.; Rice, J.E.; Snipes, J.A.; Stillerman, J.A.; Terry, J.L.; Wolfe, S.M.; Wukitch, S.J.; Zhurovich, K. [Plasma Science and Fusion Center, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)] [and others

2005-05-15T23:59:59.000Z

396

Resistive internal kink modes in a differentially rotating cylindrical plasma  

SciTech Connect

The resistive internal kink modes in a differentially rotating cylindrical plasma column are studied. It is shown that the Velikhov effect, which causes the magnetorotational instability in astrophysics, contributes to the magnetic hill/well and thereby enhances or suppresses these modes, depending on the character of radial profile of the rotation frequency. It is pointed out that, in the case of unfavorable rotation frequency profile, such a rotation-induced magnetic hill can exceed the hill effect due to the plasma pressure gradient. Under this condition, there appears a new variety of resistive-interchange modes, which are referred to as rotational modes. On the other hand, for a favorable rotation frequency profile, the Velikhov effect suppresses the resistive-interchange modes. These results concern the m>1 modes, where m is the poloidal mode number. In the case of perturbations with m=1, the favorable rotation frequency profile leads to decreasing the growth rate of the reconnecting mode.

Mikhailovskii, A. B.; Lominadze, J. G.; Galvao, R. M. O.; Churikov, A. P.; Erokhin, N. N.; Konovalov, S. V.; Smolyakov, A. I.; Tsypin, V. S. [Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, 1, Kurchatov Sq., Moscow 123182 (Russian Federation); Kharadze Abastumani National Astrophysical Observatory, 2a, Kazbegi Ave., Tbilisi 0160 (Georgia); Physics Institute, University of Sao Paulo, Cidade Universitaria, 05508-900, Sao Paulo (Brazil) and Brazilian Center for Physics Research, Rua Xavier Sigaud, 150, 22290-180, Rio de Janeiro (Brazil); Syzran Branch of Samara Technical University, 45, Sovetskaya Str., Syzran, Samara Region 446001 (Russian Federation); Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, Kurchatov Sq., 1, Moscow 123182 (Russian Federation); University of Saskatchewan, 116 Science place, Saskatoon, Saskatchewan S7N 5E2 (Canada) and Institute of Nuclear Fusion, Russian Research Centre Kurchatov Institute, Kurchatov Sq., 1, Moscow 123182 (Russian Federation); Brazilian Center for Physics Research, Rua Xavier Sigaud, 150, 22290-180, Rio de Janeiro (Brazil)

2007-11-15T23:59:59.000Z

397

Diagnostic for two-mode variable valve activation device  

DOE Patents (OSTI)

A method is provided for diagnosing a multi-mode valve train device which selectively provides high lift and low lift to a combustion valve of an internal combustion engine having a camshaft phaser actuated by an electric motor. The method includes applying a variable electric current to the electric motor to achieve a desired camshaft phaser operational mode and commanding the multi-mode valve train device to a desired valve train device operational mode selected from a high lift mode and a low lift mode. The method also includes monitoring the variable electric current and calculating a first characteristic of the parameter. The method also includes comparing the calculated first characteristic against a predetermined value of the first characteristic measured when the multi-mode valve train device is known to be in the desired valve train device operational mode.

Fedewa, Andrew M

2014-01-07T23:59:59.000Z

398

Zero Net Energy Myths and Modes of Thought  

E-Print Network (OSTI)

mypp.html. ———. (2009). "Net-Zero Energy CommercialZero Net Energy Myths and Modes of Thought  Nicholas B.  AC02? 05CH11231. Page | i Zero Net Energy Myths and Modes of

Rajkovich, Nicholas B.

2010-01-01T23:59:59.000Z

399

Cladding-pumped passive harmonically mode-locked fiber laser  

Science Journals Connector (OSTI)

A passive harmonically mode-locked fiber laser cladding pumped by a broad-area diode-laser array is described. Harmonic mode locking is obtained in a frequency range from 33.3 to 128.6...

Fermann, M E; Minelly, J D

1996-01-01T23:59:59.000Z

400

Sandia National Laboratories: BES Web Highlight: Single-mode...  

NLE Websites -- All DOE Office Websites (Extended Search)

ClimateECEnergyEnergy EfficiencyBES Web Highlight: Single-mode gallium nitride nanowire lasers BES Web Highlight: Single-mode gallium nitride nanowire lasers "Solid-state Lighting:...

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Designation of Mode Mix in Orthotropic Composite Delamination Problems  

Science Journals Connector (OSTI)

In interfacial fracture modeling of composite delamination, mode mix is typically specified in terms of energy release rates. Other near-tip quantities can be used to designate mode mix, however. This paper consi...

S.H. Narayan; J.L. Beuth

402

BuildingName The Description of the Project  

E-Print Network (OSTI)

- ALTERNATES SECTION 012900 ­ PAYMENT PROCEDURES SECTION 013100 - PROJECT MANAGEMENT AND COORDINATIONBuildingName The Description of the Project P00000000 0000 DOCUMENTS SPECIFICATION DIVISION 1 SECTION 013200 - CONSTRUCTION PROGRESS DOCUMENTATION SECTION 013300 - SUBMITTAL PROCEDURES SECTION

Kamat, Vineet R.

403

Contour extraction by mixture density description obtained from region clustering  

Science Journals Connector (OSTI)

This paper describes a contour extraction scheme which refines a roughly estimated initial contour to outline a precise object boundary. In our approach, mixture density descriptions, which are parametric desc...

Minoru Etoh; Yoshiaki Shirai; Minoru Asada

1992-01-01T23:59:59.000Z

404

Development of a body force description for compressor stability assessment  

E-Print Network (OSTI)

This thesis presents a methodology for a body force description of a compressor with particular application to compressor stability calculations. The methodology is based on extracting blade forces from an axisymmetric ...

Kiwada, George (George Ford)

2008-01-01T23:59:59.000Z

405

Generation of Web Service Descriptions and Web Service  

E-Print Network (OSTI)

Generation of Web Service Descriptions and Web Service Module Implementation for Concept University of Science and Technology Software Systems Institute (STS) #12;Abstract Nowadays web services in order to initiate the communication. A web services endpoint communication interface utilizes

406

Norwegian Language description of Jacobs University Hva er Jacobs University?  

E-Print Network (OSTI)

underviser tverrfaglig og deltar i forskningen ved Description of Jacobs University. Jacobs University tilbyr 2006 tilbyr Jacobs University mangfoldige muligheter til å lære av hverandre og leve sammen. Fordelen

407

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION  

E-Print Network (OSTI)

MECH 502: Advanced/Additive Manufacturing Engineering COURSE DESCRIPTION In this course you product development and innovation. You will develop a rich knowledge of additive manufacturing processes enabling advanced/additive manufacturing and personal fabrication. You will have the opportunity

Schumacher, Russ

408

FACT SHEET: Clean Coal University Research Awards and Project Descriptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FACT SHEET: Clean Coal University Research Awards and Project FACT SHEET: Clean Coal University Research Awards and Project Descriptions FACT SHEET: Clean Coal University Research Awards and Project Descriptions As part of President Obama's all-of-the-above approach to American energy, the Energy Department announced on June 6, 2012, that nine universities have won awards for research projects that will continue to support innovation and development of clean coal technologies. This fact sheet includes detailed project descriptions for each university-led research award. FACT SHEET_ Clean Coal University Project Descriptions_0.pdf More Documents & Publications University Coal Research Program 2013 Selections Report on Assessment of Environmentally--Assisted Fatigue for LWR Extended Service Conditions FAQS Reference Guide - Mechanical Systems

409

Description of isoscalar giant dipole resonance in nuclei  

E-Print Network (OSTI)

collective and microscopic transition densities. Possible underestimations of the energy weighted sum rule for the case of the ISGDR are reported. An alternative description for the ISGDR in nuclei based on the Fermi liquid drop model (FLDM...

Pochivalov, Oleksiy Grigorievich

2009-05-15T23:59:59.000Z

410

Power Supply Changes for NSTX Resistive Wall Mode Coils  

SciTech Connect

The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. Prior to 2004, the NSTX power system was feeding twelve (12) circuits in the machine. In 2004 the Resistive Wall Mode (RWM) Coils were installed on the machine to correct error fields. There are six of these coils installed around the machine in the mid-plane. Since these coils need fast and accurate controls, a Switching Power Amplifier (SPA) with three sub-units was procured, installed and commissioned along with other power loop components. Two RWM Coils were connected in series and fed from one SPA sub-unit. After the initial RWM campaign, operational requirements evolved such that each of the RWM coils now requires separate power and control. Hence a second SPA with three sub-units has been procured and installed. The second unit is of improved design and has the controls and power components completely isolated. The existing thyristor rectifier is used as DC Link to both of the Switching Power Amplifiers. The controls for the RWM are integrated into the overall computer control of the DC Power systems for NSTX. This paper describes the design changes in the RWM Power system for NSTX.

Ramakrishnan, S S.

2013-06-28T23:59:59.000Z

411

Plutonium Immobilization Project System Design Description for Can Loading System  

SciTech Connect

The purpose of this System Design Description (SDD) is to specify the system and component functions and requirements for the Can Loading System and provide a complete description of the system (design features, boundaries, and interfaces), principles of operation (including upsets and recovery), and the system maintenance approach. The Plutonium Immobilization Project (PIP) will immobilize up to 13 metric tons (MT) of U.S. surplus weapons usable plutonium materials.

Kriikku, E.

2001-02-15T23:59:59.000Z

412

Summary description of the Fast Flux Test Facility  

SciTech Connect

This document has been compiled and issued to provide an illustrated engineering summary description of the FFTF. The document is limited to a description of the plant and its functions, and does not cover the extensive associated programs that have been carried out in the fields of design, design analysis, safety analysis, fuels development, equipment development and testing, quality assurance, equipment fabrication, plant construction, acceptance testing, operations planning and training, and the like.

Cabell, C.P. (comp.)

1980-12-01T23:59:59.000Z

413

Solar One Beam Characterization System design description and requirements document  

SciTech Connect

A comprehensive description is provided for the Solar One Beam Characterization System. The principal uses of this system are to provide an automatic measurement of heliostat tracking errors and the optical quality of the reflected image. Measured tracking errors are used to determine bias values for the heliostat control system which compensates for the errors. Detailed descriptions are provided of the hardware, software, supporting analysis, operational sequences, and the fundamental principles involved.

Blackmon, J.B.

1986-10-01T23:59:59.000Z

414

Stabilization of Resistive Kink Modes in the Tokamak  

Science Journals Connector (OSTI)

Optimized current profiles are shown to be capable of providing simultaneous stability against all resistive kink modes in the tokamak.

A. H. Glasser; H. P. Furth; P. H. Rutherford

1977-01-31T23:59:59.000Z

415

Viscoelastic modes in a strongly coupled, cold, magnetized dusty plasma  

SciTech Connect

A generalized hydrodynamical model has been used to study the low frequency modes in a strongly coupled, cold, magnetized dusty plasma. Such plasmas exhibit elastic properties due to the strong correlations among dust particles and the tensile stresses imparted by the magnetic field. It has been shown that longitudinal compressional Alfven modes and elasticity modified transverse shear mode exist in such a medium. The features of these collective modes are established and discussed.

Banerjee, Debabrata; Mylavarapu, Janaki Sita; Chakrabarti, Nikhil [Saha Institute of Nuclear Physics, I/AF Bidhannagar, Calcutta 700 064 (India)

2010-11-15T23:59:59.000Z

416

Skyrmion vibration modes within the rational map ansatz  

SciTech Connect

We study the vibration modes of the Skyrme model within the rational map ansatz. We show that the vibrations of the radial profiles and the rational maps are decoupled and we consider explicitly the cases B=1, B=2, and B=4. We then compare our results with the vibration modes obtained numerically by Barnes et al. and show that qualitatively the rational map reproduces the vibration modes obtained numerically but that the vibration frequencies of these modes do not match very well.

Lin, W. T.; Piette, B. [Department of Mathematical Sciences, University of Durham, Durham, DH1 3LE (United Kingdom)

2008-06-15T23:59:59.000Z

417

Skyrmion Vibration Modes within the Rational Map Ansatz  

E-Print Network (OSTI)

We study the vibration modes of the Skyrme model within the rational map ansatz. We show that the vibrations of the radial profiles and the rational maps are decoupled and we consider explicitly the case B=1, B=2 and B=4. We then compare our results with the vibration modes obtained numerically by Barnes et al. and show that qualitatively the rational map reproduces the vibration modes obtained numerically but that the vibration frequencies of these modes do not match very well.

W. T. Lin; B. Piette

2008-04-30T23:59:59.000Z

418

The Influence of Topology Changes on Inter-area Oscillation Modes and Mode Shapes  

SciTech Connect

The topology of a power grid network is a piece of critical information for power grid operations. Different power grid topologies can change grid characteristics, inter-area oscillation modes, mode shapes, and even the robustness of the power system. This paper presents some preliminary study results, based on an approved WECC operating case and a modified low damping WECC system, to show the impact of topology changes resulting from N-1 contingencies on power system modes and mode shapes. The results show that topology changes can have very different impact on modal properties in a power system: some result in unstable situation, while others can improve small signal stability. For the former, the studies show about 4.5% damping reduction, so 5% damping margin would be required to ensure the system can sustain the contingencies. For the latter, those topology changes could be used as a control method to improve small signal stability. Mode shapes normally do not change when there is an N-1 topology change. These observations suggest that the inclusion of topological information is useful for improving the accuracy and effectiveness of power system control schemes.

Chen, Yousu; Fuller, Jason C.; Diao, Ruisheng; Zhou, Ning; Huang, Zhenyu; Tuffner, Francis K.

2011-10-17T23:59:59.000Z

419

Normal modes, virtual modes, and alternative representations in the theory of surface?duct sound propagation  

Science Journals Connector (OSTI)

This paper presents a theoretical study of sound propagation in an ocean?surface duct. It deals with several aspects of the theory from a point of view which has not heretofore been taken in the analyses of this problem. The model used to describe a duct assumes the ocean surface to be smooth and the square of the refractive index to be bilinear. Alternative representations of the sound field excited by a point source are derived the two playing the most significant role in this paper being the residue series and the normal?mode representation. It is shown that the depth functions of the residue series do not form a complete set as those of a normal?mode representation must and that the normal?mode spectrum is continuous rather than discrete. The completeness properties of the normal?mode functions are then utilized in a study of the energy?trapping capabilities of the duct. In this connection virtual modes are introduced and shown to lead naturally to the derivation of a leakage coefficient characteristic of the exponential leakage of energy out of the duct with increasing range. In addition a cutoff?frequency criterion useful in determining when a surface duct can trap energy is derived.

Frank M. Labianca

1973-01-01T23:59:59.000Z

420

NREL: Transmission Grid Integration - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Want updates about future transmission grid integration webinars and publications? Join our mailing list. NREL has an extensive collection of publications related to transmission integration research. Explore the resources below to learn more. Selected Project Publications Read selected publications related to these transmission integration projects: Western Wind and Solar Integration Study Eastern Renewable Generation Integration Study Oahu Wind Integration and Transmission Study Flexible Energy Scheduling Tool for Integration of Variable generation (FESTIV) Active power controls Forecasting Grid Simulation. NREL Publications Database NREL's publications database offers a variety of documents related to transmission integration that were written by NREL staff and

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

NREL: Energy Systems Integration - Events  

NLE Websites -- All DOE Office Websites (Extended Search)

and future challenges. Photo of the courtyard and two surrounding building wings of the Energy Systems Integration Facility. NREL's Energy Systems Integration Seminar Series...

422

NREL: Transmission Grid Integration - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Projects NREL's transmission integration projects provide data and models that help utilities and policymakers make informed decisions about the integration of variable generation,...

423

Integrating farming and wastewater management.  

E-Print Network (OSTI)

??Source separating wastewater systems are often motivated by their integration with farming. It is thus important to scrutinise the critical factors associated with such integration.… (more)

Tidåker, Pernilla

2007-01-01T23:59:59.000Z

424

Sandia National Laboratories: Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Specialists Conference On July 31, 2014, in DETL, Distribution Grid Integration, Energy, Energy Surety, Facilities, Grid Integration, Infrastructure Security, News, News &...

425

Power consumption optimization in multi-mode mobile relay  

E-Print Network (OSTI)

Power consumption optimization in multi-mode mobile relay C´edric L´evy-Bencheton #1 , Guillaume-mode can reduce terminal power consumption. Software Defined Radio is an enabler towards multi through relays, is another solution to reduce power consumption. We look at multi-mode relaying, where

Paris-Sud XI, Université de

426

Theory of passive harmonic mode-locking using waveguide arrays  

E-Print Network (OSTI)

laser," Opt. Lett. 23, 123-125 (1998). 3. M. E. Fermann and J. D. Minelly, "Cladding-pumped passive theoretical treatment is given of the phe- nomenon of harmonic mode-locking in a laser cavity mode Optical Society of America OCIS codes: (140.4050) Mode-locked lasers; (060.5530) Pulse propagation

427

Integrating the Integrators - A Roadmap to Success  

SciTech Connect

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven system engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

Olson, Craig Stott; Conner, Craig C

1999-03-01T23:59:59.000Z

428

Integrating the Integrators - A Roadmap to Success  

SciTech Connect

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven systems engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

C. Conner; C. Olson

1999-02-01T23:59:59.000Z

429

CIRCUIT EQUATION FORMULATION OF RESISTIVE WALL MODE  

E-Print Network (OSTI)

the significant challenge of sustaining high- plasmas near the ideal MHD limit for times long compared to the success of ver- tical position control is the integration of a passive stabilizing system that slows with the energy confinement time, E. Major disruptions often prematurely terminate high- plasma discharges [9

430

Integrated Micro Nano Systems Integrated Micro Nano Systems  

E-Print Network (OSTI)

#12;Integrated Micro Nano Systems 2 #12;Integrated Micro Nano Systems 3 Val Jones (Ed.) Symposium on Integrated Micro Nano Systems: Convergence of bio and nanotechnologies, Enschede, The Netherlands, June 2006 Micro Nano Systems 4 #12;Integrated Micro Nano Systems 5 Preface In order to explore the convergence

Al Hanbali, Ahmad

431

Predictions of Alpha Heating in ITER L-mode and H-mode Plasmas  

SciTech Connect

Predictions of alpha heating in L-mode and H-mode DT plasmas in ITER are generated using the PTRANSP code. The baseline toroidal field of 5.3 T, plasma current ramped to 15 MA and a flat electron density profile ramped to Greenwald fraction 0.85 are assumed. Various combinations of external heating by negative ion neutral beam injection, ion cyclotron resonance, and electron cyclotron resonance are assumed to start half-way up the density ramp. The time evolution of plasma temperatures and, for some cases, toroidal rotation are predicted assuming GLF23 and boundary parameters. Significant toroidal rotation and flow-shearing rates are predicted by GLF23 even in the L-mode phase with low boundary temperatures, and the alpha heating power is predicted to be significant if the power threshold for the transition to H-mode is higher than the planned total heating power. The alpha heating is predicted to be 8-76 MW in L-mode at full density. External heating mixes with higher beam injection power have higher alpha heating power. Alternatively if the toroidal rotation is predicted assuming that the ratio of the momentum to thermal ion energy conductivity is 0.5, the flow-shearing rate is predicted to have insignificant effects on the GLF23- predicted temperatures, and alpha heating is predicted to be 8-20 MW. In H-mode plasmas the alpha heating is predicted to depend sensitively on the assumed pedestal temperatures. Cases with fusion gain greater than 10 are predicted to have alpha heating greater than 80 MW.

R.V. Budny

2011-01-06T23:59:59.000Z

432

NSTX Failure Modes & Effects Analysis / NSTX-FMEA-71-10 / p. 1 of 115 FAILURE MODES AND EFFECTS ANALYSIS  

E-Print Network (OSTI)

NSTX Failure Modes & Effects Analysis / NSTX-FMEA-71-10 / p. 1 of 115 NSTX FAILURE MODES AND EFFECTS ANALYSIS (FMEA) Revision 10 Dated: November 2014 Prepared By: Name/WBS Signature Name: ________________________________________________ Ron Strykowsky, NSTX Upgrade Project Manager #12;NSTX Failure Modes & Effects Analysis / NSTX-FMEA-71

Princeton Plasma Physics Laboratory

433

Shielding integral benchmark archive and database (SINBAD)  

SciTech Connect

The shielding integral benchmark archive and database (SINBAD) collection of experiments descriptions was initiated in the early 1990s. SINBAD is an international collaboration between the Organization for Economic Cooperation and Development's Nuclear Energy Agency Data Bank (OECD/NEADB) and the Radiation Safety Information Computational Center (RSICC) at Oak Ridge National Laboratory (ORNL). SINBAD was designed to compile experiments and corresponding computational models with the goal of preserving institutional knowledge and expertise that need to be handed down to future scientists. SINBAD can serve as a learning tool for university students and scientists who need to design experiments or gain expertise in modeling and simulation. The SINBAD database is currently divided into three categories - fission, fusion, and accelerator experiments. Many experiments are described and analyzed using deterministic or stochastic (Monte Carlo) radiation transport software. The nuclear cross sections also play an important role as they are necessary in performing computational analysis. (authors)

Kirk, B.L.; Grove, R.E. [Radiation Safety Information Computational Center RSICC, Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831-6171 (United States); Kodeli, I. [Josef Stefan Inst., Jamova 39, 1000 Ljubljana (Slovenia); Gulliford, J.; Sartori, E. [OECD NEA Data Bank, Bd des Iles, 92130 Issy-les-Moulineaux (France)

2011-07-01T23:59:59.000Z

434

Single-mode, narrow-linewidth external cavity quantum cascade laser through optical feedback from a partial-reflector  

SciTech Connect

An external-cavity (EC) quantum cascade (QC) laser using optical feedback from a partial-reflector is reported. With this configuration, the otherwise multi-mode emission of a Fabry-Perot QC laser was made single-mode with optical output powers exceeding 40 mW. A mode-hop free tuning range of 2.46 cm-1 was achieved by synchronously tuning the EC length and QC laser current. The linewidth of the partial-reflector EC-QC laser was measured for integration times from 100 ?s to 4 s, and compared to a distributed feedback QC laser. Linewidths as small as 480 kHz were recorded for the EC-QC laser

Cendejas, Richard A.; Phillips, Mark C.; Myers, Tanya L.; Taubman, Matthew S.

2010-11-30T23:59:59.000Z

435

Effect of Trapped Energetic Particles on the Resistive Wall Mode  

SciTech Connect

A stability analysis for the resistive wall mode is studied in the presence of trapped energetic particles (EPs). When the EPs' beta exceeds a critical value, a fishbonelike bursting mode (FLM) with an external kink eigenstructure can exist. This offers the first analytic interpretation of the experimental observations [Phys. Rev. Lett. 103, 045001 (2009)]. The mode-particle resonances for the FLM and the q=1 fishbone occur in different regimes of the precession frequency of EPs. In certain ranges of the plasma rotation speed and the EPs' beta, a mode conversion can occur between the resistive wall mode and FLM.

Hao, G. Z.; Wang, A. K.; Qiu, X. M. [Southwestern Institute of Physics, Post Office Box 432, Chengdu 610041 (China); Liu, Y. Q. [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom)

2011-07-01T23:59:59.000Z

436

Secure ICCP IntegrationConsiderations and Recommendations | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ICCP IntegrationConsiderations and Recommendations ICCP IntegrationConsiderations and Recommendations Secure ICCP IntegrationConsiderations and Recommendations The goal of this report is to identify the operation and implementation issues associated with the introduction of the secure form of the Inter-control Center Communications Protocol, or ICCP, formally referred to as IEC 60870-6-TASE.2, into the utility infrastructure. The report provides considerations and recommendations to assist a utility owner to advance the security of the utility's data exchange operations. The report starts with a description of information assurance, and then discusses end node authentication and Public Key Infrastructures (PKI) using Certificate Authority (CA) certificates. Network infrastructures and protocols associated with ICCP are reviewed, assessed, and modeled to identify the

437

Demonstration of Integrated Optimization Software at the Baldwin Energy Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Coal Power Clean Coal Power Initiative (CCPI) contacts Brad tomer Director Office of Major Demonstrations National Energy Technology Laboratory 3610 Collins Ferry Road P.O. Box 880 Morgantown, WV 26507-0880 304-285-4692 brad.tomer@netl.doe.gov George Pukanic Project Manager National Energy Technology Laboratory 626 Cochrans Mill Road P.O. Box 10940 Pittsburgh, PA 15236-0940 412-386-6085 george.pukanic@netl.doe.gov PaRtIcIPant NeuCo, Inc., Boston, MA aDDItIonaL tEaM MEMBERs Dynegy Midwest Generation (host) Demonstration of integrateD optimization software at the BalDwin energy Complex Project Description NeuCo, Inc., of Boston, Massachusetts, has designed and demonstrated new integrated on-line optimization systems at Dynegy Midwest Generation's Baldwin Energy

438

Benefits of Integrating PWR and RTI Advanced Gasification Technologies for  

NLE Websites -- All DOE Office Websites (Extended Search)

Syngas Processing Systems Syngas Processing Systems Benefits of Integrating PWR and RTI Advanced Gasification Technologies for Hydrogen-Rich Syngas Production Research Triangle Institute (RTI) Project Number: FE0012066 Project Description The project will assess the potential for integrated advanced technologies to substantially reduce capital and production costs for hydrogen-rich syngas with near-zero emissions from coal gasification for power production with carbon capture and for coal-to-liquids (specifically methanol) with carbon capture. These integrated technologies include those already tested successfully at pilot-scale with a new and innovative water-gas-shift technology, to show how multiple advanced technologies will leverage each other for significant cost and efficiency gains.

439

Integrated Modules for Bioassay (IMBA) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Modules for Bioassay (IMBA) Integrated Modules for Bioassay (IMBA) Integrated Modules for Bioassay (IMBA) Current Central Registry Toolbox Version(s): IMBA ExpertTM USDOE Edition version 4.0.28 Code Owner: UK Health Protection Agency (HPA) Description: IMBA ExpertTM (IX) software suite comprises a series of independent modules (referred to as sub-modules) that implement the International Commission on Radiological Protection (ICRP) Publication 66, Human Respiratory Tract Model (HRTM) and the ICRP Publications 30 (series), 67, 68, 69, and 71 biokinetic models. In 2001, the United Kingdom (UK) National Radiological Protection Board (NRPB), whose functions were absorbed later into the UK Health Protection Agency (HPA), and ACJ & Associates Inc., began development of an interface (referred to as a shell) for the IMBA modules. This effort was funded in

440

Integrating Management Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Mission Execution by Mission Execution by Integrating our Management Systems Integrating our Management Systems 1 W e e k l y O p e r a t i o n s M e e t i n g N o v e m b e r 1 , 2 0 1 1 M i c h a e l J . W e i s Pulling the Pieces Together for Improving DOE Management to Enable Mission Execution 2 ï‚— Process changes Process changes ï‚— Behavioral changes Behavioral changes ï‚— System changes System changes Process Change Approach Strengthening and Expediting Decision Making 3 Proposed Outcomes Horizontal Integration Incoming DOE Business Crosscutting Issues (i.e. NLDC input) Hi-level Roadblocks Operations Management Council Associate Deputy Secretary Collaborative Action Process Chief Operating Officer Weekly Operations Council (OMC) Super 8 Secretary (ADS) (CAP) Board (COOB) p Meeting Endorsement / Commitment Super 8 US Meetings COO Meetings

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Damping of unwanted modes in SRF deflecting/crabbing cavities  

SciTech Connect

As deflecting and crab cavities do not use the fundamental acceleration mode for their operation, the spectrum of unwanted modes is significantly different from that of accelerating cavities. The fundamental acceleration mode is now unwanted and can cause energy spread in the beam; in addition this mode frequency is often close to or lower than that of the deflecting mode, making it difficult to damp. This is made more complex in some of the compact crab cavities as there small beampipes often attenuate the fields very sharply. In addition in some crab cavities there can be an orthogonal transverse mode similar to the deflecting mode, known as the same order mode. The degeneracy of these modes must be split by polarising the cavity and if the polarisation is not large enough, dampers should be placed at either an electric or magnetic field null of the crabbing mode to effectively damp the unwanted polarisation. Various concepts for dealing with unwanted modes in various SRF deflecting cavities will be reviewed.

Burt, Graeme [University of Lancaster (United Kingdom); Wang, Haipeng [JLAB, Newport News, VA (United States)

2014-01-01T23:59:59.000Z

442

Integrated solid waste management of Springfield, Massachusetts  

SciTech Connect

The subject document reports the results of an in-depth investigation of the fiscal year 1993 cost of the city of Springfield, Massachusetts, integrated municipal solid waste management (IMSWM) system, the energy consumed to operate the system, and the environmental performance requirements for each of the system`s waste-processing and disposal facilities. The document reports actual data from records kept by participants. Every effort was made to minimize the use of assumptions, and no attempt is made to interpret the data reported. Analytical approaches are documented so that interested analysts may perform manipulation or further analysis of the data. As such, the report is a reference document for Municipal Solid Waste management professionals who are interested in the actual costs and energy consumption, for a 1-year period, of an operating IMSWM system. The report is organized into two main parts. The first part is the executive summary and case study portion of the report. The executive summary provides a basic description of the study area and selected economic and energy information. Within the case study are detailed descriptions of each component operating during the study period; the quantities of solid waste collected, processed, and marketed within the study boundaries; the cost of managing MSW in Springfield; an energy usage analysis; a review of federal, state, and local environmental requirement compliance; a reference section; and a glossary of terms. The second part of the report focuses on a more detailed discourse on the above topics. In addition, the methodology used to determine the economic costs and energy consumption of the system components is found in the second portion of this report. The methodology created for this project will be helpful for those professionals who wish to break out the costs of their own integrated systems.

NONE

1995-11-01T23:59:59.000Z

443

Chemistry, Reservoir, and Integrated Models  

Energy.gov (U.S. Department of Energy (DOE))

Below are the project presentations and respective peer review results for Chemistry, Reservoir and Integrated Models.

444

Multi-mode ultrasonic welding control and optimization  

DOE Patents (OSTI)

A system and method for providing multi-mode control of an ultrasonic welding system. In one embodiment, the control modes include the energy of the weld, the time of the welding process and the compression displacement of the parts being welded during the welding process. The method includes providing thresholds for each of the modes, and terminating the welding process after the threshold for each mode has been reached, the threshold for more than one mode has been reached or the threshold for one of the modes has been reached. The welding control can be either open-loop or closed-loop, where the open-loop process provides the mode thresholds and once one or more of those thresholds is reached the welding process is terminated. The closed-loop control provides feedback of the weld energy and/or the compression displacement so that the weld power and/or weld pressure can be increased or decreased accordingly.

Tang, Jason C.H.; Cai, Wayne W

2013-05-28T23:59:59.000Z

445

Macdonald processes, quantum integrable systems and the Kardar-Parisi-Zhang universality class  

E-Print Network (OSTI)

Integrable probability has emerged as an active area of research at the interface of probability/mathematical physics/statistical mechanics on the one hand, and representation theory/integrable systems on the other. Informally, integrable probabilistic systems have two properties: 1) It is possible to write down concise and exact formulas for expectations of a variety of interesting observables (or functions) of the system. 2) Asymptotics of the system and associated exact formulas provide access to exact descriptions of the properties and statistics of large universality classes and universal scaling limits for disordered systems. We focus here on examples of integrable probabilistic systems related to the Kardar-Parisi-Zhang (KPZ) universality class and explain how their integrability stems from connections with symmetric function theory and quantum integrable systems.

Ivan Corwin

2014-03-26T23:59:59.000Z

446

Commercial Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings Buildings Integration Program Arah Schuur Program Manager arah.schuur@ee.doe.gov April 2, 2013 Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Vision Commercial buildings are constructed, operated, renovated and transacted with energy performance in mind and net zero ready commercial buildings are common and cost-effective. Commercial Buildings Integration Program Mission Accelerate voluntary uptake of significant energy performance improvements in existing and new commercial buildings. 3 | Building Technologies Office eere.energy.gov BTO Goals: BTO supports the development and deployment of technologies and systems to reduce

447

Integrated heterodyne terahertz transceiver  

DOE Patents (OSTI)

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. A terahertz signal can be received by an antenna connected to the mixer, an end facet or sidewall of the laser, or through a separate active section that can amplify the incident signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Wanke, Michael C. (Albuquerque, NM); Lee, Mark (Albuquerque, NM); Nordquist, Christopher D. (Albuquerque, NM); Cich, Michael J. (Albuquerque, NM)

2012-09-25T23:59:59.000Z

448

Explicit global integrators  

E-Print Network (OSTI)

be advantageous. For this purpose, forward interpolation utilizing Radau Quadrature will be employed. An explicit method of global integration has been developed to estimate a solution to a differential equation. A set of functions P (x), P (x), , P (x) and a... set of points n+1 x , x , , x can be found such that n+1 r x n+1 f(u)du = g P. (x)i'(x. ) 0 i=1 for all x when f(u) is a polynomial of degree n or less. The above process is described by Axelsson as global integration. In . th the cases...

Merriam, Robert Stevens

2012-06-07T23:59:59.000Z

449

Smart Grid Integration Laboratory  

SciTech Connect

The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation â?? all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSUâ??s overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratoryâ??s focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of electrical power distribution system that integrates significant quantities of renewable and distributed energy resources; (4) System dynamic modeling that considers end-user behavior, economics, security and regulatory frameworks; (5) Best practices for energy management IT control solutions for effective distributed energy integration (including security with the underlying physical power systems); (6) Experimental verification of effects of various arrangements of renewable generation, distributed generation and user load types along with conventional generation and transmission. Understanding the core technologies for enabling them to be used in an integrated fashion within a distribution network remains is a benefit to the future energy paradigm and future and present energy engineers.

Wade Troxell

2011-09-30T23:59:59.000Z

450

Integrated system design report  

SciTech Connect

The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

Not Available

1989-07-01T23:59:59.000Z

451

Search for invisible decays of Higgs bosons in the vector boson fusion and associated ZH production modes  

SciTech Connect

A search for invisible decays of Higgs bosons is performed using the vector boson fusion and associated ZH production modes. In the ZH mode, the Z boson is required to decay to a pair of charged leptons or a b b-bar quark pair. The searches use the 8 TeV pp collision dataset collected by the CMS detector at the LHC, corresponding to an integrated luminosity of up to 19.7 inverse femtobarns. Certain channels include data from 7 TeV collisions corresponding to an integrated luminosity of 4.9 inverse femtobarns. The searches are sensitive to non-standard-model invisible decays of the recently observed Higgs boson, as well as additional Higgs bosons with similar production modes and large invisible branching fractions. In all channels, the observed data are consistent with the expected standard model backgrounds. Limits are set on the production cross section times invisible branching fraction, as a function of the Higgs boson mass, for the vector boson fusion and ZH production modes. By combining all channels, and assuming standard model Higgs boson cross sections and acceptances, the observed (expected) upper limit on the invisible branching fraction at m[H] = 125 GeV is found to be 0.58 (0.44) at 95% confidence level. We interpret this limit in terms of a Higgs-portal model of dark matter interactions.

Chatrchyan, Serguei; et. al,

2014-08-01T23:59:59.000Z

452

Search for invisible decays of Higgs bosons in the vector boson fusion and associated ZH production modes  

E-Print Network (OSTI)

A search for invisible decays of Higgs bosons is performed using the vector boson fusion and associated ZH production modes. In the ZH mode, the Z boson is required to decay to a pair of charged leptons or a b b-bar quark pair. The searches use the 8 TeV pp collision dataset collected by the CMS detector at the LHC, corresponding to an integrated luminosity of up to 19.7 inverse femtobarns. Certain channels include data from 7 TeV collisions corresponding to an integrated luminosity of 4.9 inverse femtobarns. The searches are sensitive to non-standard-model invisible decays of the recently observed Higgs boson, as well as additional Higgs bosons with similar production modes and large invisible branching fractions. In all channels, the observed data are consistent with the expected standard model backgrounds. Limits are set on the production cross section times invisible branching fraction, as a function of the Higgs boson mass, for the vector boson fusion and ZH production modes. By combining all channels, and assuming standard model Higgs boson cross sections and acceptances, the observed (expected) upper limit on the invisible branching fraction at m[H] = 125 GeV is found to be 0.58 (0.44) at 95% confidence level. We interpret this limit in terms of a Higgs-portal model of dark matter interactions.

CMS Collaboration

2014-04-04T23:59:59.000Z

453

MFTF: a computer program for calculating the MARS mode operating parameters for the axicell MFTF-B  

SciTech Connect

We describe the models used to calculate the equilibrium operating point for the MARS mode of the axicell MFTF-B, and present the model equations necessary to calculate the plasma and potential parameters in the central-cell, axicell, and anchor regions. In addition, we calculate the neutral beam, rf power, and gas inputs required to sustain the plasma and maintain the ion and electron-particle energy balance. After a brief description of the MFTF code, we present the results of a sample calculation using MFTF.

Jong, R.A.

1983-01-13T23:59:59.000Z

454

PROTON, ELECTRON, AND ION HEATING IN THE FAST SOLAR WIND FROM NONLINEAR COUPLING BETWEEN ALFVENIC AND FAST-MODE TURBULENCE  

SciTech Connect

In the parts of the solar corona and solar wind that experience the fewest Coulomb collisions, the component proton, electron, and heavy ion populations are not in thermal equilibrium with one another. Observed differences in temperatures, outflow speeds, and velocity distribution anisotropies are useful constraints on proposed explanations for how the plasma is heated and accelerated. This paper presents new predictions of the rates of collisionless heating for each particle species, in which the energy input is assumed to come from magnetohydrodynamic (MHD) turbulence. We first created an empirical description of the radial evolution of Alfven, fast-mode, and slow-mode MHD waves. This model provides the total wave power in each mode as a function of distance along an expanding flux tube in the high-speed solar wind. Next, we solved a set of cascade advection-diffusion equations that give the time-steady wavenumber spectra at each distance. An approximate term for nonlinear coupling between the Alfven and fast-mode fluctuations is included. For reasonable choices of the parameters, our model contains enough energy transfer from the fast mode to the Alfven mode to excite the high-frequency ion cyclotron resonance. This resonance is efficient at heating protons and other ions in the direction perpendicular to the background magnetic field, and our model predicts heating rates for these species that agree well with both spectroscopic and in situ measurements. Nonetheless, the high-frequency waves comprise only a small part of the total Alfvenic fluctuation spectrum, which remains highly two dimensional as is observed in interplanetary space.

Cranmer, Steven R.; Van Ballegooijen, Adriaan A. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States)

2012-08-01T23:59:59.000Z

455

Program Name Deadline Announcement # Grant Description Web Site / PDF  

E-Print Network (OSTI)

observations and field campaigns that support SMD science missions; development of integrated Earth system models; development of systems for applying Earth science research data to societal needs

Wu, Shin-Tson

456

Enhancing The Mode Conversion Efficiency In JET Plasmas With Multiple Mode Conversion Layers  

SciTech Connect

The constructive interference effect described by Fuchs et al. [1] shows that the mode conversion and thereby the overall heating efficiency can be enhanced significantly when an integer number of fast wave wavelengths can be folded in between the high field side fast wave cutoff and the ion-ion hybrid layer(s) at which the ion Bernstein or ion cyclotron waves are excited. This effect was already experimentally identified in ({sup 3}He)-D plasmas [2] and was recently tested in ({sup 3}He)-H JET plasmas. The latter is an 'inverted' scenario, which differs significantly from the ({sup 3}He)-D scenarios since the mode-conversion layer is positioned between the low field side edge of the plasma and the ion-cyclotron layer of the minority {sup 3}He ions (whereas the order in which a wave entering the plasma from the low field side encounters these layers is inverted in a 'regular' scenario), and because much lower {sup 3}He concentrations are needed to achieve the mode-conversion heating regime. The presence of small amounts of {sup 4}He and D in the discharges gave rise to an additional mode conversion layer on top of the expected one associated with {sup 3}He-H, which made the interpretation of the results more complex but also more interesting: Three different regimes could be distinguished as a function of X[{sup 3}He], and the differing dynamics at the various concentrations could be traced back to the presence of these two mode conversion layers and their associated fast wave cutoffs. Whereas (1-D and 2-D) numerical modeling yields quantitative information on the RF absorptivity, recent analytical work by Kazakov [3] permits to grasp the dominant underlying wave interaction physics.

Van Eester, D.; Lerche, E.; Ongena, J. [LPP-ERM/KMS, Association Euratom-'Belgian State', TEC Partner, Brussels (Belgium); Johnson, T.; Hellsten, T. [Fusion Plasma Physics, Association Euratom-VR, KTH, Stockholm (Sweden); Mayoral, M.-L.; Beaumont, P.; Blackman, T.; Brennan, D.; Brett, A.; Coffey, I.; Coyne, A.; Felton, R.; Giroud, C.; Jacquet, P.; Kiptily, V.; Knipe, S.; Monakhov, I.; Noble, C.; Pangioni, L. [Euratom-CCFE Fusion Association, Culham Science Centre (United Kingdom)

2011-12-23T23:59:59.000Z

457

Onset and Saturation of a Non-resonant Internal Mode in NSTX and Implications For AT Modes in ITER  

SciTech Connect

Motivated by experimental observations of apparently triggerless tearing modes, we have performed linear and nonlinear MHD analysis showing that a non-resonant mode with toroidal mode number n = 1 can develop in the National Spherical Torus eXperiment (NSTX) at moderate normalized ?N when the shear is low and the central safety factor q0 is close to but greater than one. This mode, which is related to previously identified ‘infernal’ modes, will saturate and persist, and can develop poloidal mode number m = 2 magnetic islands in agreement with experiments. We have also extended this analysis by performing a free-boundary transport simulation of an entire discharge and showing that, with reasonable assumptions, we can predict the time of mode onset. __________________________________________________

J.A. Breslau, M.S. Chance, J. Chen, G.Y. Fu, S,. Gerhardt, N. Gorelenkov, S.C. Jardin and J. Manickam

2011-08-01T23:59:59.000Z

458

2342 IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 39, NO. 12, DECEMBER 2004 A 4-A Quiescent-Current Dual-Mode Digitally  

E-Print Network (OSTI)

2342 IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 39, NO. 12, DECEMBER 2004 A 4-A Quiescent voltage compatibility between a single-cell lithium-ion battery voltage and a low-voltage integrated with each full charge of the battery, pulse frequency modulation (PFM) mode is preferred for light load

Sanders, Seth

459

Discontinuous Function Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Discontinuous Function Integration Discontinuous Function Integration Name: Clarence Status: student Grade: 9-12 Location: CA Country: USA Date: Winter 2011-2012 Question: We know that the area under a continuous function on a certain interval, for instance, [a,b], can be found out by definite integration (taking limit of a sum of areas of rectangles). But when the curve is a discontinuous function, the limit does not exist and is not independent of the choice of the height of rectangle in each delta x. Does it mean that the height in an interval delta x including f(x) of undefined value can be any value so that a limiting value (area under the curve) does not exist? Replies: If I understand your question correctly, here is a way out. The limits of integration are divided into sections [x1,y1] to [x2,y2] over which the function is continuous. Then the next section [x2,y2] to [x3,y3] over which the function is continuous is added to the first section. You can carry this on as long as you need to include each of the separate segments. That is not so hard, but I am not completely sure that is what you are asking. There are some pathological functions where this pasting together does not work so well.

460

Bioluminescent bioreporter integrated circuit  

DOE Patents (OSTI)

Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

Simpson, Michael L. (Knoxville, TN); Sayler, Gary S. (Blaine, TN); Paulus, Michael J. (Knoxville, TN)

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Ethics & Integrity Presented by  

E-Print Network (OSTI)

Ethics & Integrity Presented by Chris Loschiavo Assistant Dean and Director Student Conduct · Ethics Activity · Introduction to Ethics · Case Studies · Conclusions/ Questions #12;UF Student Code;Introduction to Ethics #12;Defining the Term "Ethics" · The term "ethics" comes from the Latin word "ethica

Roy, Subrata

462

Acceleration of Time Integration  

SciTech Connect

We outline our strategies for accelerating time integration for long-running simulations, such as those for global climate modeling. The strategies target the Cray XT systems at the National Center for Computational Sciences at Oak Ridge National Laboratory. Our strategies include fully implicit, parallel-in-time, and curvelet methods.

White III, James B [ORNL; Drake, John B [ORNL; Worley, Patrick H [ORNL; Archibald, Richard K [ORNL; Evans, Katherine J [ORNL; Kothe, Douglas B [ORNL

2007-01-01T23:59:59.000Z

463

GHG Considerations in Integrated  

E-Print Network (OSTI)

6/5/2013 1 GHG Considerations in Integrated Resource Planning NWPCC Greenhouse Gas and Regional Power System Symposium © 2012 Portland General Electric. All rights reserved. June 4, 2013 GHG in the IRP: OPUC Guidelines OPUC Guidelines for GHG: A four-part harmonyOPUC Guidelines for GHG: A four part

464

Integrated Management Requirements mapping  

SciTech Connect

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia`s approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

465

Integrated Management Requirements mapping  

SciTech Connect

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia's approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

466

Integrated Marketing Communications  

E-Print Network (OSTI)

in Tupelo Integrated Marketing Communications degree program NEW! AVAILABLE FALL 2011 If you are interested in a career in advertising, public relations, sales promotion, or marketing communications, this degree program can prepare you for the numerous facets of a marketing career in the 21st century. e

Elsherbeni, Atef Z.

467

Integrated Safety Management  

Directives, Delegations, and Requirements

The order ensures that DOE/NNSA, systematically integrates safety into management and work practices at all levels, so that missions are accomplished efficiently while protecting the workers, the public, and the environment. Cancels DOE M 450.4-1 and DOE M 411.1-1C

2011-04-25T23:59:59.000Z

468

Microsoft Word - Proposal Form Description and Guidelines-rev.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Form Description and Form Description and Guidelines Please read the Proposal Form Description and Guidelines entirely before submitting a CNM Proposal You must register online through the User Facility Registration System BEFORE submitting a CNM Proposal. All individuals coming to Argonne must register, receive a badge number, and receive access permission for arrival. You will receive a badge number by e-mail. To log on to the Online User Proposal System for the first time, enter your badge number and also use your badge number for your initial password. Once you are logged in, the system will ask you to change your password. The CNM proposal has seven sections, each accessed by a tab on the online form. Note: All proposals MUST be submitted through the web-based system.

469

Property:Distributed Generation/Site Description | Open Energy Information  

Open Energy Info (EERE)

Generation/Site Description Generation/Site Description Jump to: navigation, search This is a property of type String. The allowed values for this property are: Agricultural Commercial-Hotel Commercial-Ice Arena Commercial-High Rise Office Commercial-Low Rise Office Commercial-Refrigerated Warehouse Commercial-Restaurant Commercial-Retail Store Commercial-Supermarket Commercial-Theater Commercial-Other Institutional-Hospital/Health Care Institutional-Nursing Home Institutional-School/University Institutional-Other Residential-Multifamily-Single Building Residential-Multifamily-Multibuilding Residential-Single Family Industrial-Food Processing Industrial-Plastics Processing Industrial-Wood Products Industrial-Other Testing Laboratory Water Utility Other Utility Other Pages using the property "Distributed Generation/Site Description"

470

Waste receiving and processing plant control system; system design description  

SciTech Connect

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

LANE, M.P.

1999-02-24T23:59:59.000Z

471

TDE Ecosystem Model Intercomparison Data Archive: Model Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

Model Descriptions Model Descriptions BGC++ BIOME-BGC CANOAK EALCO ecosys INTRASTAND LaRS LINKAGES v2.1 LoTEC MAESTRA NuCM PnET II SPA Literature Cited A total of 13 models were used in this study covering a range of temporal scales, spatial complexity, and mechanistic detail (Figure 1). Eight of the models (8) used an hourly time step, four models used a daily time step, and only one model used a monthly time step (i.e., PnET-II). Most models provided estimates for both stand carbon and water budgets, but other were limited to either the carbon (MAESTRA) or water (LINKAGES and NuCM) budgets. The most mechanistically complex models (ecosys, CLASS, LaRS, and CANOAK) also used a complete energy balance. A brief description of each of the models is provided below. BGC++ The BGC++ model (Hunt et al. 1999) simulates carbon, nitrogen, and

472

Sliding mode-based DTC-SVM control of permanent magnet synchronous motors for plug-in electric and hybrid vehicles  

Science Journals Connector (OSTI)

This paper presents a sliding mode controller design for a permanent magnet synchronous motor used in an integrated powertrain for plug-in electric and hybrid vehicles. In order to adapt to complicated driving environment and improve the robustness of the system, a sliding mode-based torque controller is developed. At the same time, a sliding mode speed controller is also proposed to meet the need of gear shift of the integrated powertrain. The stability and robustness of the proposed controllers are analysed. Computer simulations are performed to verify the effectiveness of the proposed control system. The simulation results illustrate that fast response and small ripples are achieved using the proposed control scheme. It is also shown that the control system is robust against load variations, measurement errors and parameter uncertainty. In addition, the transition during shift is smooth. Therefore, the proposed control scheme is suitable for control of the propulsion motor for plug-in electric and hybrid vehicles.

Hong Fu; Yaobin Chen; Guangyu Tian; Quanshi Chen

2011-01-01T23:59:59.000Z

473

The optimal selection of inspection modes in a serial production process  

E-Print Network (OSTI)

notat1on w111 be used in the description of each mode j: i+1 Yi r. 1 Figure 1. Sample Stage i 1. 0 0. 9 0. 8 O. 0. 7 U u + 0. 6 Q. 0. 5 D 0, 4 J3 P 0. 3 0. 2 0. 1 0 I 00 I I I I I I I I I I I I I I I s'I 0. 98 0. 96 0... with its probability of acceptance is: Pa (s, . ) = 1 0 . 1 (4) not be inspected into an item. The quality level, however, can be raised by removing defectives through inspection, rectified or non- rectified. For inspection with rectified lots...

Bridges, Jesse Bradley

2012-06-07T23:59:59.000Z

474

Integrated optics and new wave phenomena in optical waveguides  

Science Journals Connector (OSTI)

Research in integrated optics has two goals: One is to apply thin-film technology to the formation of optical devices and circuits. The other is the integration of a large number of optical devices on a small substrate, so forming an optical circuit reminiscent of the integrated circuit in microelectronics. The result is a new breed of optical devices in the form of miniature optical waveguides. They include lasers, modulators, switches, detectors, prisms, lenses, and polarizers, and many of them have efficiencies better than their bulk counterparts. Simple integrated optical circuits have also been constructed, and rapidly advancing semiconductor technology indicates that monolithic integrated optical circuits can readily be developed using GaAs-related compounds. In this paper, we review the state-of-the-art of integrated optics and explore new wave phenomena in optical circuits. The specific topics to be discussed are: light-wave couplers and m-line spectroscopy, refraction and reflection of light in thin films, normal modes of the uniform, the graded and the metal-clad waveguides, optics in tapered films, theory of corrugated waveguides, and more importantly, physics of various thin-film optical devices and the method of the circuit formation.

P. K. Tien

1977-04-01T23:59:59.000Z

475

Collisional damping of the geodesic acoustic mode  

SciTech Connect

The frequency and damping rate of the geodesic acoustic mode (GAM) is revisited by using a gyrokinetic model with a number-conserving Krook collision operator. It is found that the damping rate of the GAM is non-monotonic as the collision rate increases. At low ion collision rate, the damping rate increases linearly with the collision rate; while as the ion collision rate is higher than v{sub ti}/R, where v{sub ti} and R are the ion thermal velocity and major radius, the damping rate decays with an increasing collision rate. At the same time, as the collision rate increases, the GAM frequency decreases from the (7/4+{tau})v{sub ti}/R to (1+{tau})v{sub ti}/R, where {tau} is the ratio of electron temperature to ion temperature.

Gao Zhe [Department of Engineering Physics, Tsinghua University, Beijing 100084 (China)

2013-03-15T23:59:59.000Z

476

The effect of simplifying the building description on the numerical modeling of its thermal performance  

SciTech Connect

A thermal building simulation program is a numerical model that calculates the response of the building envelopes to weather and human activity, simulates dynamic heating and cooling loads, and heating and cooling distribution systems, and models building equipment operation. The scope of the research is to supply the users of such programs with information about the dangers and benefits of simplifying the input to their models. The Introduction describes the advantages of modeling the heat transfer mechanisms in a building. The programs that perform this type of modeling have, however, limitations. The user is therefore often put in the situation of simplifying the floor plans of the building under study, but not being able to check the effects that this approximation introduces in the results of the simulation. Chapter 1 is a description of methods. It also introduces the floor plans for the office building under study and the ``reasonable`` floor plans simplifications. Chapter 2 presents DOE-2, the thermal building simulation program used in the sensitivity study. The evaluation of the accuracy of the DOE-2 program itself is also presented. Chapter 3 contains the sensitivity study. The complicated nature of the process of interpreting the temperature profile inside a space leads to the necessity of defining different building modes. The study compares the results from the model of the detailed building description with the results from the models of the same building having simplified floor plans. The conclusion is reached that a study of the effects of simplifying the floor plans of a building is important mainly for defining the cases in which this approximation is acceptable. Different results are obtained for different air conditioning/load regimes of the building. 9 refs., 24 figs.

Stetiu, C.

1993-07-01T23:59:59.000Z

477

ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE  

Office of Legacy Management (LM)

ACTION DESCRIPTION MEMORANDUM ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE UNIVERSITY OF CHICAGO CONTAMINATED AS A RESULT OF PREVIOUS MED/AEC ACTIVITIES Prepared by Environmental Research Division Argonne National Laboratory Argonne, Illinois December 1983 Prepared for U.S. Department of Energy Oak Ridge Operations Technical Services Division Oak Ridge, Tennessee II-39 CONTENTS Page Summary of Proposed Action ....................... 1 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. 1 Background and Need for Action ..................... 2 Proposed Remedial Action ........................ 3 Potential Issues ................... ......... 4 Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. 6 Tables. ............ .................. 7 References ................... ............ 8

478

SU?GG?J?14: Failure Mode and Effect Analysis (FMEA)?Based Quality Assurance for Dynamic MLC Tracking Systems  

Science Journals Connector (OSTI)

Purpose: Effective QA for newly introduced radiotherapy technology has received increased attention within the radiotherapy community and the general public. This work aims to develop and implement a FMEA?based quality management (QM) framework for dynamic MLC (DMLC) tumortracking systems.Methods: A systematic FMEA was performed for a prototype tumortracking system that uses the Calypso system for position monitoring and a DMLC for real?time beam adaptation. A process tree of DMLC tracking delivery was mapped and potential failure modes were identified. For each failure mode a risk probability number (RPN 1:1000) was calculated from the product of the probability of occurrence severity of effect and detectability of failure. Based on the insights obtained from FMEA commissioning and QA procedures were developed to check (i) coordinate transformation (ii) system latency (iii) delivery accuracy (iv) delivery efficiency and (v) system response to error conditions. Results: Failures modes with RPN ? 20 were: delivery accuracy efficiency and data communication integrity. These were recommended to be tested monthly. Failure modes with RPN FMEA proved to be a powerful and flexible tool to develop a QM framework for DMLC tracking. We conclude that the use of FMEA ensures efficient allocation of valuable clinical resources because the most critical failure modes receive the most attention. Finally consistent with the goals of FMEA this framework can serve as the basis of a dynamic QM program that is continuously updated with increasing intra? and inter?institutional experience.

A Sawant; S Dieterich; M Svatos; P Keall

2010-01-01T23:59:59.000Z

479

Experimental performance analysis of a solar assisted ground source heat pump system under different heating operation modes  

Science Journals Connector (OSTI)

Abstract This paper presents an experimental study on the influence of operation modes on the heating performance of a solar assisted ground source heat pump system (SAGSHPS). Through experiments conducted in January, the characteristics of the SAGSHPS were investigated under different heating operation modes. The results indicate that the solar thermal could be used to accelerate the soil recovery when the heat pump unit is turned off, but the duration of solar use to recharge boreholes should be optimized according to the water temperature in the solar heat storage water tank to avoid unnecessary power consumption of the circulation pump. In addition, the solar heat storage water tank is beneficial for the stable operation of the SAGSHPS. The volumetric flow rate in the water tank has a significant impact on the electricity consumption of the SAGSHPS. From comprehensive analysis of the integral effect of the SAGSHPS under different modes, the mode in which the water tank is connected with the ground heat exchangers (GHES) in series is the recommended mode for the SAGSHPS in the coldest month in Dalian.

Lanhua Dai; Sufen Li; Lin DuanMu; Xiangli Li; Yan Shang; Ming Dong

2015-01-01T23:59:59.000Z

480

Dynamics of resistive double tearing modes with broad linear spectra  

E-Print Network (OSTI)

model of a tokamak plasma. We focus on cases where thefocus is on a qualita- tive description of fundamental aspects of the magnetized plasma

Bierwage, A; Benkadda, S; Hamaguchi, S; Wakatani, M

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description integration mode" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

INTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE  

E-Print Network (OSTI)

Integrated Design of Commercial Building Ceiling Systems Integrated Design of Residential Ducting & Air FlowINTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE Productivity and Interior Environments Integrated Design of Large Commercial HVAC Systems Integrated Design of Small Commercial HVAC Systems

482

Integrated packaging allows for improvement in switching characteristics of silicon carbide devices  

E-Print Network (OSTI)

Integrated packaging allows for improvement in switching characteristics of silicon carbide devices will be available after the conference. Abstract Silicon Carbide devices can achieve very high switching speed-mode filtering). The consequences on the switching speed are discussed. 1. Introduction Silicon carbide (Si

Paris-Sud XI, Université de

483

A new integrated fuzzy bangbang relay control system Farrukh Nagi *, L. Perumal, J. Nagi  

E-Print Network (OSTI)

Keywords: Bang­bang Fuzzy logic control Sliding mode controller Optimal control Pneumatic rotary actuatorA new integrated fuzzy bang­bang relay control system Farrukh Nagi *, L. Perumal, J. Nagi Real-time control a b s t r a c t In this paper, we propose a new fuzzy bang­bang relay controller

Ducatelle, Frederick

484

INTEGRATION OF AUDIO/VISUAL INFORMATION FOR USE IN HUMANCOMPUTER INTELLIGENT INTERACTION  

E-Print Network (OSTI)

INTEGRATION OF AUDIO/VISUAL INFORMATION FOR USE IN HUMAN­COMPUTER INTELLIGENT INTERACTION Vladimir,berry,huangg@ifp.uiuc.edu ABSTRACT Human­computer intelligent interaction (HCII) in virtual environments is a rapidly developing modes of human­computer communication. By using auditory and visual features at different levels

Pavlovic, Vladimir

485

A Strategy to Minimize Dust Foregrounds in B-mode Searches  

E-Print Network (OSTI)

The Planck satellite has identified several patches of sky with low polarized dust emission, obvious targets for searches for the cosmic-microwave-background (CMB) B-mode signal from inflationary gravitational waves. Still, given the Planck measurement uncertainties, the polarized dust foregrounds in these different candidate patches may differ by an order of magnitude or more. Here we show that a brief initial experiment to map these candidate patches more deeply at a single high frequency can efficiently zero in on the cleanest patch(es) and thus improve significantly the sensitivity of subsequent B-mode searches. A ground-based experiment with current detector technology operating at >~220 GHz for 3 months can efficiently identify a low-dust-amplitude patch and thus improve by up to 20%-60% on the sensitivity to cosmic B modes of the subsequent lower-frequency deep integration. A balloon experiment with current detector sensitivities covering the set of patches and operating at ~350 GHz can reach a similar...

Kovetz, Ely D

2015-01-01T23:59:59.000Z

486

On-line Chemistry within WRF: Description and Evaluation of a State-of-the-Art Multiscale Air Quality and Weather Prediction Model  

SciTech Connect

This is a conference proceeding that is now being put together as a book. This is chapter 2 of the book: "INTEGRATED SYSTEMS OF MESO-METEOROLOGICAL AND CHEMICAL TRANSPORT MODELS" published by Springer. The chapter title is "On-line Chemistry within WRF: Description and Evaluation of a State-of-the-Art Multiscale Air Quality and Weather Prediction Model." The original conference was the COST-728/NetFAM workshop on Integrated systems of meso-meteorological and chemical transport models, Danish Meteorological Institute, Copenhagen, May 21-23, 2007.

Grell, Georg; Fast, Jerome D.; Gustafson, William I.; Peckham, Steven E.; McKeen, Stuart A.; Salzmann, Marc; Freitas, Saulo

2010-01-01T23:59:59.000Z

487

Towards a detection of individual g modes in the Sun  

E-Print Network (OSTI)

Since the detection of the asymptotic properties of the dipole gravity modes in the Sun, the quest to find the individual gravity modes has continued. A deeper analysis of the GOLF/SoHO data unveils the presence of a pattern of peaks that could be interpreted as individual dipole gravity modes. The computed collapsed spectrum -around these candidate modes- uncovers the presence of a quasi constant frequency splitting, in contrast with regions where no g modes are expected in which the collapsogram gives random results. Besides, the same technique applied to VIRGO/SoHO unveils some common signals between both power spectra. Thus, we can identify and characterize the modes, for example, with their central frequency and splittings. This would open the path towards new investigations to better constrain the solar core.

Garcia, R A; Eff-Darwich, A; Garrido, R; Jimenez, A; Mathis, S; Mathur, S; Moya, A; Palle, P L; Regulo, C; Salabert, D; Suarez, J C; Turck-Chieze, S

2010-01-01T23:59:59.000Z

488

A current driven electromagnetic mode in sheared and toroidal configurations  

E-Print Network (OSTI)

The induced electric field in a tokamak drives a parallel electron current flow. In an inhomogeneous, finite beta plasma, when this electron flow is comparable to the ion thermal speed, the Alfven mode wave solutions of the electromagnetic gyrokinetic equation can become nearly purely growing kink modes. Using the new "low-flow" version of the gyrokinetic code GS2 developed for momentum transport studies [Barnes et al 2013 Phys. Rev. Lett. 111, 055005], we are able to model the effect of the induced parallel electric field on the electron distribution to study the destabilizing influence of current on stability. We identify high mode number kink modes in GS2 simulations and make comparisons to analytical theory in sheared magnetic geometry. We demonstrate reassuring agreement with analytical results both in terms of parametric dependences of mode frequencies and growth rates, and regarding the radial mode structure.

Pusztai, István; Parra, Felix I; Barnes, Michael

2013-01-01T23:59:59.000Z

489

Integrated Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Deployment Integrated Deployment Integrated Deployment Integrated technology deployment uses a comprehensive approach to implement a variety of efficiency and renewable energy technology solutions in communities and cities, federal agencies, international locations, and states and territories. need_alt Community Renewable Energy Deployment Webinars Hear about successful community renewable energy projects, including the challenges and barriers faced during development. Learn more Integrated Deployment Projects The following projects provide examples of how the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory have used an integrated approach to address various location-specific energy challenges that is both scalable and replicable around the world:

490

Integrated Assessment | Open Energy Information  

Open Energy Info (EERE)

Integrated Assessment Integrated Assessment Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Integrated Assessment: Mainstreaming sustainability into policymaking--A guidance manual Agency/Company /Organization: United Nations Environment Programme Topics: Background analysis Website: www.unep.ch/etb/publications/AI%20guidance%202009/UNEP%20IA%20final.pd Equivalent URI: cleanenergysolutions.org/content/times-integrated-assessment-model-0,h Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance References: Integrated Assessment[1] The Times Integrated Assessment Model (TIAM) comprises several thousand technologies in all sectors of the energy system. It is characterized by several technical and economic parameters and by emission coefficients for

491

Statistical Testing for Disk Encryption Modes of Mohamed Abo El-Fotouh and Klaus Diepold  

E-Print Network (OSTI)

. We are going to study ten modes of operations, five narrow-block modes (CFB, CBC, CTR, LRW and XTS

492

Optimization to reduce fuel consumption in charge depleting mode  

DOE Patents (OSTI)

A powertrain includes an internal combustion engine, a motor utilizing electrical energy from an energy storage device, and a plug-in connection. A Method for controlling the powertrain includes monitoring a fuel cut mode, ceasing a fuel flow to the engine based upon the fuel cut mode, and through a period of operation including acceleration of the powertrain, providing an entirety of propelling torque to the powertrain with the electrical energy from the energy storage device based upon the fuel cut mode.

Roos, Bryan Nathaniel; Martini, Ryan D.

2014-08-26T23:59:59.000Z

493

Circular modes for flat beams in the LHC  

Typically x/y optical coupling is considered as unwanted and thus suppressed; particular exclusions are electron and ionization coolers. Could some special coupled modes be effectively applied for the LHC complex? Perhaps, the answer is positive: use of the circular modes in the injectors with their transformation into planar modes in the LHC allows both the space charge and beam-beam luminosity limitations to be significantly reduced, if not practically eliminated.

Burov, A.

2013-06-01T23:59:59.000Z

494

Circular modes for flat beams in the LHC  

Science Journals Connector (OSTI)

Typically x/y optical coupling is considered as unwanted and thus suppressed; particular exclusions are electron and ionization coolers. Could some special coupled modes be effectively applied for the LHC complex? Perhaps, the answer is positive: use of the circular modes in the injectors with their transformation into planar modes in the LHC allows both the space charge and beam-beam luminosity limitations to be significantly reduced, if not practically eliminated.

A. Burov

2013-06-24T23:59:59.000Z

495

Mode trap for absorbing transverse modes of an accelerated electron beam  

DOE Patents (OSTI)

A mode trap to trap and absorb transverse modes formed by a beam in a linear accelerator includes a waveguide having a multiplicity of electrically conductive (preferably copper) irises and rings, each iris and ring including an aperture, and the irises and rings being stacked in a side-by-side, alternating fashion such that the apertures of the irises and rings are concentrically aligned. An absorbing material layer such as a dielectric is embedded in each iris and ring, and this absorbing material layer encircles, but is circumferentially spaced from its respective aperture. Each iris and ring includes a plurality of circumferentially spaced slots around its aperture and extending radially out toward its absorbing material layer.

Chojnacki, Eric P. (Woodridge, IL)

1994-01-01T23:59:59.000Z

496

Mode trap for absorbing transverse modes of an accelerated electron beam  

DOE Patents (OSTI)

A mode trap to trap and absorb transverse modes formed by a beam in a linear accelerator includes a waveguide having a multiplicity of electrically conductive (preferably copper) irises and rings, each iris and ring including an aperture, and the irises and rings being stacked in a side-by-side, alternating fashion such that the apertures of the irises and rings are concentrically aligned. An absorbing material layer such as a dielectric is embedded in each iris and ring, and this absorbing material layer encircles, but is circumferentially spaced from its respective aperture. Each iris and ring includes a plurality of circumferentially spaced slots around its aperture and extending radially out toward its absorbing material layer. 9 figs.

Chojnacki, E.P.

1994-05-31T23:59:59.000Z

497

Roadmap Integration Team Presentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Presentation Presentation NP03-00 Slide 1 Generation IV Technology Roadmap NERAC Meeting: Washington, D.C. September 30, 2002 Roadmap Integration Team Presentation NP03-00 Slide 2 NERAC Meeting September 30, 2002 Generation IV Technology Roadmap * Identifies systems deployable by 2030 or earlier * Specifies six systems that offer significant advances towards: - Sustainability - Economics - Safety and reliability - Proliferation resistance and physical protection * Summarizes R&D activities and priorities for the systems * Lays the foundation for Generation IV R&D program plans Roadmap Integration Team Presentation NP03-00 Slide 3 NERAC Meeting September 30, 2002 The Technical Roadmap Report * Discusses the benefits, goals and challenges, and the importance of the fuel cycle * Describes evaluation and selection process

498

Integrated Project Team RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Project Team (IPT) Review Module Integrated Project Team (IPT) Review Module March 2010 CD-0 This R O 0 Review Modul OFFICE OF Inte C CD-1 le was piloted F ENVIRO Standard R grated P Rev Critical Decis CD-2 M at the OR U 23 incorporated ONMENTAL Review Plan Project Te view Module sion (CD) Ap CD March 2010 33 Disposition in the Review L MANAGE n (SRP) eam (IPT e pplicability D-3 Project in 200 Module. EMENT T) CD-4 09. Lessons lea Post Ope arned have been eration n Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM

499

Nonlinear integrable ion traps  

SciTech Connect

Quadrupole ion traps can be transformed into nonlinear traps with integrable motion by adding special electrostatic potentials. This can be done with both stationary potentials (electrostatic plus a uniform magnetic field) and with time-dependent electric potentials. These potentials are chosen such that the single particle Hamilton-Jacobi equations of motion are separable in some coordinate systems. The electrostatic potentials have several free adjustable parameters allowing for a quadrupole trap to be transformed into, for example, a double-well or a toroidal-well system. The particle motion remains regular, non-chaotic, integrable in quadratures, and stable for a wide range of parameters. We present two examples of how to realize such a system in case of a time-independent (the Penning trap) as well as a time-dependent (the Paul trap) configuration.

Nagaitsev, S.; /Fermilab; Danilov, V.; /SNS Project, Oak Ridge

2011-10-01T23:59:59.000Z

500

Volunteer Service Position Description Title: Speaking for Wildlife Presenter  

E-Print Network (OSTI)

Hampshire Cooperative Extension is an equal opportunity educator and employer University of New Hampshire, UVolunteer Service Position Description Title: Speaking for Wildlife Presenter Term: One Year Duties; (2) Actively publicize the availability of SFW presentations in your community; (3) For field walks

New Hampshire, University of