Powered by Deep Web Technologies
Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Description of Energy Intensity Tables (12)  

U.S. Energy Information Administration (EIA) Indexed Site

3. Description of Energy Intensity Data Tables 3. Description of Energy Intensity Data Tables There are 12 data tables used as references for this report. Specifically, these tables are categorized as tables 1 and 2 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1985, 1988, 1991, and 1994; along with the percentage changes between 1985 and the three subsequent years (1988, 1991, and 1994) tables 3 and 4 present 1988, 1991, and 1994 energy-intensity ratios that have been adjusted to the mix of products shipped from manufacturing establishments in 1985 tables 5 and 6 present unadjusted energy-intensity ratios for Offsite-Produced Energy and Total Inputs of Energy for 1988, 1991, and 1994; along with the percentage changes between 1988 and the two subsequent

2

energy intensity | OpenEI  

Open Energy Info (EERE)

intensity intensity Dataset Summary Description Energy intensity data and documentation published by the U.S. DOE's office of Energy Efficiency and Renewable Energy (EERE). Energy intensity is defined as: amount of energy used in producing a given level of output or activity; expressed as energy per unit of output. This is the energy intensity of the the electricity sector, which is an energy consuming sector that generates electricity. Data are organized to separate electricity-only generators from combined heat and power (CHP) generators. Data is available for the period 1949 - 2004. Source EERE Date Released May 31st, 2006 (8 years ago) Date Updated Unknown Keywords Electricity Energy Consumption energy intensity fossil fuels renewable energy Data application/vnd.ms-excel icon electricity_indicators.xls (xls, 2.1 MiB)

3

Energy Intensity Strategy  

E-Print Network [OSTI]

Our presentation will cover how we began the journey of conserving energy at our facility. We’ll discuss a basic layout of our energy intensity plan and the impact our team has had on the process, what tools we’re using, what goals have been...

Rappolee, D.; Shaw, J.

2008-01-01T23:59:59.000Z

4

Unlocking energy intensive habits  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

energy intensive habits energy intensive habits Presentation at LBL Oct 10, 2013 by Hal Wilhite Professor and Research Director University of Oslo Centre for Development and the Environment Source: WWF US EIA Outlook 2011 Conventional framing of the energy consumption and savings * Sovereign consumers * Economically rational and persistentely reflexive. * Uninfluenced by social and material conditions of everyday life * Focus on efficiency and not on size and volume which is for the most part treated as an indifferent variable Cognitive reductionism The change of frame * From individual to socio-material * From rational/reflexive experience-based (practical) knowledge * From efficiency to reduction A theory of habit * Acknowledges the role of lived experience (history, both cultural and personal) in forming

5

ITP Energy Intensive Processes: Energy-Intensive Processes Portfolio...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

teChnologIes Program IntroduCtIon the research and development (r&d) portfolio for energy-Intensive Processes (eIP) addresses the top technology opportunities to save energy...

6

Changes in Energy Intensity 1985-1991  

Gasoline and Diesel Fuel Update (EIA)

Changes in Energy Intensity Changes in Energy Intensity 1985-1991 Overview Full Report The focus is on intensity of energy use measured by energy consumption relative to constant...

7

EMS Description | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

EMS Description EMS Description Environmental Management System Description (August 2014) Environmental Management System Description (August 2014) More Documents & Publications...

8

Iron and Steel Energy Intensities  

U.S. Energy Information Administration (EIA) Indexed Site

If you are having trouble, call 202-586-8800 for help. Home > >Energy Users > Energy Efficiency Page > Iron and Steel Energy Intensities First Use of Energy Blue Bullet First Use/Value of Production Blue Bullet First Use/Ton of steel End Uses of Consumption Blue Bullet Total End Use/Value of Production Blue Bullet Total End Use/Ton of Steel Boiler Fuel as End Use Blue Bullet Boiler Fuel /Value of Production Blue Bullet Boiler Fuel /Ton of Steel Process Heating as End Use Blue Bullet Process Heating Fuel /Ton of Steel Blue Bullet Process Heating /Value of Production Machine Drive as End Use Blue Bullet Machine Drive Fuel/Ton of Steel Blue Bullet Machine Drive Fuel /Value of Production Expenditures Blue Bullet Purchased Fuel /Ton of Steel Blue Bullet Purchased Fuel /Value of Production

9

Energy Intensity Baselining and Tracking Guidance  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Learn more at betterbuildings.energy.gov Energy Intensity Baselining and Tracking Guidance i Preface The U.S. Department of Energy's (DOE) Better Buildings, Better Plants Program...

10

Energy Intensity Baselining and Tracking Guidance  

Broader source: Energy.gov [DOE]

The Energy Intensity Baselining and Tracking Guidance for the Better Buildings, Better Plants Program helps companies meet the program’s reporting requirements by describing the steps necessary to develop an energy consumption and energy intensity baseline and calculating consumption and intensity changes over time.

11

World Best Practice Energy Intensity Values for Selected Industrial Sectors  

E-Print Network [OSTI]

world best practice energy intensity values for productionWorld best practice energy intensity values for productionWorld Best Practice Final Energy Intensity Values for Aluminium Production (

Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

2007-01-01T23:59:59.000Z

12

World Best Practice Energy Intensity Values for Selected Industrial Sectors  

E-Print Network [OSTI]

Best Practice Final Energy Intensity Values for Stand-AloneBest Practice Final Energy Intensity Values for Stand-AloneBest Practice Primary Energy Intensity Values for Stand-

Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

2007-01-01T23:59:59.000Z

13

Impact Factors of Energy Intensity in China  

E-Print Network [OSTI]

Energy intensity reflects energy usage efficiency in the production and consumption process, and leads to carbon dioxide emissions and the energy security of an economy. Liao et al. (2007) analyzed factors contribute to the fluctuation of China’s energy intensity from 1997 to 2006, and found that efficiency effects and structural effects are the major impacting factors. Therefore, they suggested that China should attach more importance to optimizing its sectoral structure, and lowering its investment ratio in the future. However, economic development and energy intensity are influenced by many factors. In their research, Liao et al. (2007) omitted some important contributing factors to energy intensities, and their suggestions also had some practical limitations. First of all, Liao et al. (2007) did not analyze impacts from energy prices in energy usage efficiency. In the existing literature, Birol and Keppler (2000) applied economics theory and suggested that higher energy prices can induce the improvements in energy usage efficiency, thereby lowering energy intensity. Hang and Tu (2007) studied the influence of energy price on the Chinese economy's energy intensity and their empirical results also showed that higher energy prices can lower energy intensity. Because energy prices have been regulated by the

unknown authors

14

On the description of the GCR intensity in the last three solar minima  

E-Print Network [OSTI]

We discuss the main characteristic features in the heliospheric parameters important for the GCR intensity modulation for the last three solar minima (1986--1987, 1996--1997 and 2008--2009). The model for the GCR intensity modulation is considered and the set of the model parameters is chosen which allows the description of the observed GCR intensity distributions at the moments of the maximum GCR intensity in two solar minima (1987 and 1997) normal for the second half of the last century. Then we try to describe with the above model and set of parameters the unusually soft GCR energy spectra at the moments of the maximum GCR intensity in the last solar minimum between cycles 23 and 24 (2009). Our main conclusion is that the most simple way to do so is to reduce the size of the modulation region and, probably, change the rigidity dependence of the diffusion coefficient. The change of both parameters is substantiated by the observations of the solar wind and heliospheric magnetic field.

Kalinin, M S; Krainev, M B; Svirzhevskaya, A K; Svirzhevsky, N S

2014-01-01T23:59:59.000Z

15

ESMAP-China Energy Intensity Reduction Strategy | Open Energy Information  

Open Energy Info (EERE)

Intensity Reduction Strategy Intensity Reduction Strategy Jump to: navigation, search Name China-ESMAP Low Carbon Growth Country Studies Program Agency/Company /Organization Energy Sector Management Assistance Program of the World Bank Sector Energy, Land Focus Area Energy Efficiency, Renewable Energy, Forestry, Agriculture Topics Low emission development planning, Policies/deployment programs, Background analysis Website http://www.esmap.org/filez/pub Country China Eastern Asia References China Energy Intensity Reduction Strategy[1] Overview "The study involves the development of pragmatic "implementation" focused policy notes to support the Government of China's goal of reducing energy intensity in China focusing on: Reevaluation of renewable energy targets, growth path, and related

16

Technical Change, Investment and Energy Intensity  

E-Print Network [OSTI]

This paper analyzes the role of different components of technical change on energy intensity by applying a Translog variable cost function setting to the new EU KLEMS dataset for 3 selected EU countries (Italy, Finland and ...

Kratena, Kurt

17

Sustaining Performance Improvements in Energy Intensive Industries  

E-Print Network [OSTI]

Experience has shown that significant opportunity for performance improvements exists in energy intensive operations. Often, efforts to improve efficiency focus on vendor-led initiatives to improve operations of particular equipment. This approach...

Moore, D. A.

2005-01-01T23:59:59.000Z

18

Sustainable Energy Scheme Mentor Job description  

E-Print Network [OSTI]

1 Sustainable Energy Scheme Mentor Job description Department: Student Administration and Registry and Outreach Team Job title: Engineering Scheme Mentor Responsible to: UK Student Recruitment and Outreach Team and agreement between the Sustainable Energy Scheme Mentor and the UK Student Recruitment and Outreach Team

Anderson, Jim

19

EIA Energy Efficiency-Commercial Buildings Sector Energy Intensities,  

U.S. Energy Information Administration (EIA) Indexed Site

Commercial Buildings Sector Energy Intensities Commercial Buildings Sector Energy Intensities Commercial Buildings Sector Energy Intensities: 1992- 2003 Released Date: December 2004 Page Last Revised: August 2009 These tables provide estimates of commercial sector energy consumption and energy intensities for 1992, 1995, 1999 and 2003 based on the Commercial Buildings Energy Consumption Survey (CBECS). They also provide estimates of energy consumption and intensities adjusted for the effect of weather on heating, cooling, and ventilation energy use. Total Site Energy Consumption (U.S. and Census Region) Html Excel PDF bullet By Principal Building Activity (Table 1a) html Table 1a excel table 1a. pdf table 1a. Weather-Adjusted by Principal Building Activity (Table 1b) html table 1b excel table 1b pdf table 1b.

20

Analysis of the Energy Intensity of Industries in California  

E-Print Network [OSTI]

the aggregate energy-intensity of industry. Applied Energyindustries with final energy intensities of 12.3 Billion BtuAs mentioned, the energy intensity of this sector is much

Can, Stephane de la Rue du

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

China-Energy Intensity Reduction Strategy | Open Energy Information  

Open Energy Info (EERE)

Website http:www.esmap.orgfilezpub Country China Eastern Asia References China Energy Intensity Reduction Strategy1 Overview "The study involves the development of...

22

Measuring energy efficiency: Is energy intensity a good evidence base?  

Science Journals Connector (OSTI)

Abstract There is a widespread assumption in energy statistics and econometrics that energy intensity and energy efficiency are equivalent measures of energy performance of economies. The paper points to the discrepancy between the engineering concept of energy efficiency and the energy intensity as it is understood in macroeconomic statistics. This double discrepancy concerns definitions (while engineering concept of energy efficiency is based on the thermodynamic definition, energy intensity includes economic measures) and use. With regard to the latter, the authors conclude that energy intensity can only provide indirect and delayed evidence of technological and engineering energy efficiency of energy conversion processes, which entails shortcomings for management and policymaking. Therefore, we suggest to stop considering subsectoral, sectoral and other levels of energy intensities as aggregates of lower-level energy efficiency. It is suggested that the insufficiency of energy intensity indicators can be compensated with the introduction of thermodynamic indicators describing energy efficiency at the physical, technological, enterprise, sub-sector, sectoral and national levels without references to any economic or financial parameters. Structured statistical data on thermodynamic efficiency is offered as a better option for identifying break-through technologies and technological bottle-necks that constrain efficiency advancements. It is also suggested that macro-level thermodynamic indicators should be based on the thermodynamic first law efficiency and the energy quality problem may be left to enterprise-level thermoeconomic optimization.

L. Proskuryakova; A. Kovalev

2015-01-01T23:59:59.000Z

23

ITP Energy Intensive Processes: Improved Heat Recovery in Biomass...  

Broader source: Energy.gov (indexed) [DOE]

Energy Intensive Processes: Improved Heat Recovery in Biomass-Fired Boilers ITP Energy Intensive Processes: Improved Heat Recovery in Biomass-Fired Boilers biomass-firedboilers.pd...

24

Reducing Industrial Energy Intensity in the Southeast Project...  

Broader source: Energy.gov (indexed) [DOE]

Industrial Energy Intensity in the Southeast Project Fact Sheet Reducing Industrial Energy Intensity in the Southeast Project Fact Sheet This fact sheet contains details regarding...

25

Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION  

Broader source: Energy.gov (indexed) [DOE]

2 2 Electricity Delivery and Energy Reliability PROGRAM DESCRIPTION The Office of Electricity Delivery and Energy Reliability (OE) leads national efforts to modernize the electric grid, enhance security and reliability of energy infrastructure, and facilitate recovery from disruptions to the energy supply. As stated in the President's A Policy Framework for the 21 st Century Grid, a smarter, modernized electric grid is fundamental to transforming the Nation's energy system and securing US leadership in a clean energy future. OE supports activities that enable innovation across the energy sector, empower American consumers, and secure our energy future. OE consists of three programs: Research and Development; Permitting, Siting and Analysis; and Infrastructure Security and Energy Restoration.

26

STEP Energy Coach and Technical Consultant Job Descriptions  

Broader source: Energy.gov [DOE]

STEP Energy Coach and Technical Consultant Job Descriptions, from the Tool Kit Framework: Small Town University Energy Program (STEP).

27

China energy issues : energy intensity, coal liquefaction, and carbon pricing  

E-Print Network [OSTI]

In my dissertation I explore three independent, but related, topics on China's energy issues. First, I examine the drivers for provincial energy-intensity trends in China, and finds that technology innovation is the key ...

Wu, Ning, Ph. D. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

28

Energy use and carbon dioxide emissions in energy-intensive industries in key developing countries  

E-Print Network [OSTI]

R. Schaeffer, 1997, “Energy Intensity in the Iron and Steelwhich is the ratio of the actual energy intensity to thebest practice energy intensity, where the best practice

Price, Lynn; Worrell, Ernst; Phylipsen, Dian

1999-01-01T23:59:59.000Z

29

Energy-Efficiency Technologies and Benchmarking the Energy Intensity for the Textile Industry  

E-Print Network [OSTI]

Benchmarking the Energy Intensity for the Textile Industryand Comparing the Energy Intensity in the Textile Industrywere visited. The energy intensity of each plant was

Hasanbeigi, Ali

2014-01-01T23:59:59.000Z

30

Property:Technology Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Technology Description Property Type Text Pages using the property "Technology Description" Showing 25 pages using this property. (previous 25) (next 25) M MHK Technologies/14 MW OTECPOWER + MINIMIZE SURFACE ACTIVITIES TO REDUCE THE CAPITAL COST AND TO IMPROVE EFFICIENCY ALTERNATE WORKING FLUIDS ARE USED FOR ENHANCED POWER EFFICIENCY IN OPTEC POWER HYBRID CYCLES ARE USED TO IMPROVE POWER AND NEED WITH SUBSEA HEAT EXCHANGERS ADVANCED SUPPORTING VESSEL CONCEPT AND FREE STANDING RISER TECHNOLOGIES TO WITH STAND HARSH OCEAN ENVIRONMENT IN DEEPWATER HAD BEEN DEVELOPED FOR THIS OPTEC POWER IT IS THE ONLY RELIABLE AND PROFITABLE RENEWABLE ENERGY SOURCE FOR THE NEED OF WORLD ENERGY FOR THE NEXT DECADE DESALINATION AND HDROGEN PRODUCTION ARE LINKED TO THE POWER GENERATION OF THE OTEC POWER FOR SEVERAL BY PRODUCTS COST EFFECTIVE PRODUCTION CLEAN ENERGY AND CLEAN WATER IS THE GOAL OF OTECPOWER INC OUR 14 MW OTEC POWER COSTS 50 MILLION USD ALL EQUIPMENT HAD BEEN DESINGED AND A FEW OF THEM ARE TESTED FOR OIL AND GAS INDUSTRY APPLICATION WHICHA RE BEING USED FOR OTECPOWER A RELIABLE AND FEASIBLE OTECPOWER IS PROPOSED

31

Energy use and energy intensity of the U.S. chemical industry  

E-Print Network [OSTI]

23 5.3 Energy Use and Energy Intensity of Chlorine44314 Energy Use and Energy Intensity of the U.S. ChemicalEnergy Use and Energy Intensity of the U.S. Chemical

Worrell, Ernst; Phylipsen, Dian; Einstein, Dan; Martin, Nathan

2000-01-01T23:59:59.000Z

32

Table 22. Energy Intensity, Projected vs. Actual  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Intensity, Projected vs. Actual" Energy Intensity, Projected vs. Actual" "Projected" " (quadrillion Btu / real GDP in billion 2005 chained dollars)" ,1993,1994,1995,1996,1997,1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011 "AEO 1994",11.24893441,11.08565002,10.98332766,10.82852279,10.67400621,10.54170176,10.39583203,10.27184573,10.14478673,10.02575883,9.910410202,9.810812106,9.69894802,9.599821783,9.486985399,9.394733753,9.303329725,9.221322623 "AEO 1995",,10.86137373,10.75116461,10.60467959,10.42268977,10.28668187,10.14461664,10.01081222,9.883759026,9.759022105,9.627404949,9.513643295,9.400418762,9.311729546,9.226142899,9.147374752,9.071102491,8.99599906 "AEO 1996",,,10.71047701,10.59846153,10.43655044,10.27812088,10.12746866,9.9694713,9.824165152,9.714832565,9.621874334,9.532324916,9.428169355,9.32931308,9.232716414,9.170931044,9.086870061,9.019963901,8.945602337

33

Energy End-Use Intensities in Commercial Buildings 1992 - Index...  

U.S. Energy Information Administration (EIA) Indexed Site

2 Energy End-Use Intensities 1992 Energy End-Use Intensities Overview Tables National estimates of energy consumption by fuel (electricity and natural gas) and end use (heating,...

34

China's energy intensity and its determinants at the provincial level  

E-Print Network [OSTI]

Energy intensity is defined as the amount of energy consumed per dollar of GDP (Gross Domestic Product). The People's Republic of China's (China's) energy intensity has been declining significantly since the late 1970s. ...

Zhang, Xin, S.M. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

35

Variational description of the nuclear free energy  

Science Journals Connector (OSTI)

By means of a variational calculation, we place an upper bound on the finite-temperature free energy for nuclear systems which can be described by pseudospin Hamiltonians. The trial states are irreducible permutation invariant Gibbs states. The best trial state is the one which minimizes the free energy operator. We compare the upper bound with the numerically computed free energy for the Meshkov-Glick-Lipkin Hamiltonian for various values of nucleon number N and nuclear interaction strength V. For large N and/or ?(=1kT) the best trial Gibbs state becomes a good approximation to the actual density operator. Somewhat surprisingly, the variational approach reveals the presence of a second order thermodynamic phase transition much more clearly than the numerical computation does, even though the former is only an approximation to the latter.NUCLEAR STRUCTURE Finite-temperature free energy, pseudospin Hamiltonian, variational description and phase transitions, atomic coherent states.

Da Hsuan Feng; Robert Gilmore; L. M. Narducci

1979-03-01T23:59:59.000Z

36

ANALYSIS ON THE MAJOR INFLUENCE FACTORS OF ENERGY INTENSITY CHANGING  

E-Print Network [OSTI]

Based on the energy intensity data of period 1990-2008, this paper uses impulse response function and variance decomposition model to empirical analysis the main influencing factors and effects of energy intensity,. The empirical results show that: the energy intensity of itself, and the proportion of secondary industry have a larger impact on energy intensity; the change of energy price and technological progress also play a certain impact on energy intensity; and the link with the internal relations and interaction mechanisms, which can play an active role in improving energy efficiency.

Xia Wang; Lu Tang

37

Changes in Energy Intensity in the Manufacturing Sector 1985-1994  

U.S. Energy Information Administration (EIA) Indexed Site

Changes in Energy Intensity in the Manufacturing Sector 1985 - 1994 Full Report Introduction Summary of Data Data Tables Data Summaries All (20-39) Food (20) Textiles (22) Apparel (23) Lumber (24) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone (32) Metals (33) Fab. Metals (34) Machinery (35) El. Equip.(36) Instruments (38) Misc. (39) Appendices Survey Design Quality of Data Sector Description Nonobservation Errors Glossary Intensity Sites Commercial Residential Transportation International Manufacturing Energy Intensity Changes in Energy Intensity Click for Full Graph Manufacturing Energy Consumption Consumption of Energy Click for Full Graph Manufacturing Shipments History of Shipments Click for Full Graph The focus of this data report is on intensity of energy use, measured by energy consumption relative to constant dollar shipments of manufactured products -- commonly called energy intensities (EI) by energy analysts. This report explicitly relates changes in two energy measures of energy intensity to efficiency, while being cognizant that there are structural and behavioral effects enmeshed in those measures of energy efficiency. Reporting EI serves to continue the Intensity Change report series.

38

AN INTENSE LOW ENERGY MUON SOURCE FOR THE MUON COLLIDER  

E-Print Network [OSTI]

AN INTENSE LOW ENERGY MUON SOURCE FOR THE MUON COLLIDER D. Taqqu Paul Scherrer Institut, Villigen, CH Abstract A scheme for obtaining an intense source of low energy muons is described. It is based of the decay muons an intense intermediate energy muon beam is obtained. For the specific case of negative

McDonald, Kirk

39

Energy resource management for energy-intensive manufacturing industries  

SciTech Connect (OSTI)

A program to introduce energy resource management into an energy-intensive manufacturing industry is presented. The food industry (SIC No. 20) was chosen and 20 companies were selected for interviews, but thirteen were actually visited. The methodology for this program is detailed. Reasons for choosing the food industry are described. The substance of the information gained and the principal conclusions drawn from the interviews are given. Results of the model Energy Resource Management Plan applied to three companies are compiled at length. Strategies for dissemination of the information gained are described. (MCW)

Brenner, C.W.; Levangie, J.

1981-10-01T23:59:59.000Z

40

Table 23. Energy Intensity, Projected vs. Actual  

Gasoline and Diesel Fuel Update (EIA)

Energy Intensity, Projected vs. Actual Energy Intensity, Projected vs. Actual (quadrillion Btu / $Billion Nominal GDP) 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 AEO 1982 20.1 18.5 16.9 15.5 14.4 13.2 AEO 1983 19.9 18.7 17.4 16.2 15.1 14.0 9.5 AEO 1984 20.1 19.0 17.7 16.5 15.5 14.5 10.2 AEO 1985 20.0 19.1 18.0 16.9 15.9 14.7 13.7 12.7 11.8 11.0 10.3 AEO 1986 18.3 17.8 16.8 16.1 15.2 14.3 13.4 12.6 11.7 10.9 10.2 9.5 8.9 8.3 7.8 AEO 1987 17.6 17.0 16.3 15.4 14.5 13.7 12.9 12.1 11.4 8.2 AEO 1989* 16.9 16.2 15.2 14.2 13.3 12.5 11.7 10.9 10.2 9.6 9.0 8.5 8.0 AEO 1990 16.1 15.4 11.7 8.6 6.4 AEO 1991 15.5 14.9 14.2 13.6 13.0 12.5 11.9 11.3 10.8 10.3 9.7 9.2 8.7 8.3 7.9 7.4 7.0 6.7 6.3 6.0 AEO 1992 15.0 14.5 13.9 13.3 12.7 12.1 11.6 11.0 10.5 10.0 9.5 9.0 8.6 8.1 7.7 7.3 6.9 6.6 6.2 AEO 1993 14.7 13.9 13.4 12.8 12.3 11.8 11.2 10.7 10.2 9.6 9.2 8.7 8.3 7.8 7.4 7.1 6.7 6.4

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Property:File/Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name File/Description Property Type Text Description Description of the file's contents/purpose. Pages using the property "File/Description" Showing 25 pages using this property. (previous 25) (next 25) A Australia-Solar-Map.png + Average Daily Solar Exposure: Australia B BOEMRE OCS.oil.gas.2007-12.map.pdf + Outer Continental Shelf (OCS) Oil & Gas Leasing Program 2007 - 2012 BOEMRE US.CSB.Map.pdf + US Continental Shelf Boundary (CSB) Areas BOEMRE US.CSB.bathy.map.pdf + Outer Continental Shelf (OCS) Boundary Areas, in color BOEMRE atlantic.OCS.multiple.use.map.2003.pdf + Multiple Uses of the Atlantic Outer Continental Shelf BOEMRE lease.platforms.santa.barb.map.5.2010.pdf + Federal Leases in Pacific Ocean, near Santa Maria Basin

42

Property:Wavemaking Description | Open Energy Information  

Open Energy Info (EERE)

Description Description Jump to: navigation, search Property Name Wavemaking Description Property Type Text Pages using the property "Wavemaking Description" Showing 25 pages using this property. (previous 25) (next 25) A Alden Large Flume + Wave generators not yet designed Alden Small Flume + Period adjustable electronically, height adjustable mechanically Alden Wave Basin + Period adjustable electronically, height adjustable mechanically C Carderock Maneuvering & Seakeeping Basin + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions. Carderock Tow Tank 2 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions Carderock Tow Tank 3 + Irregular waves with a spectrum resembling typical ocean wave patterns with appropriate scale reductions.

43

Analysis and Decomposition of the Energy Intensity of Industries in California  

E-Print Network [OSTI]

World Best Practice Energy Intensity Values for Selectedworld-best-practice-energy-intensity-values- selected-2005. Changes in energy intensities of Thai industry between

Can, Stephane de la Rue de

2014-01-01T23:59:59.000Z

44

Automated Checkpointing for Enabling Intensive Applications on Energy Harvesting Devices  

E-Print Network [OSTI]

Automated Checkpointing for Enabling Intensive Applications on Energy Harvesting Devices Azalia intensive computation on ultra-low power devices with discontinuous energy-harvesting supplies. We devise on a battery-less RF energy-harvester platform. Extensive experiments targeting applications in medical implant

45

BEAM INTENSITY AND ENERGY CONTROL FOR THE SPIRAL2 FACILITY  

E-Print Network [OSTI]

BEAM INTENSITY AND ENERGY CONTROL FOR THE SPIRAL2 FACILITY C. Jamet, T. Andre, B. Ducoudret, C to control both beam intensity and energy by non-interceptive methods at the linac exit. The beam current will range in intensity from a few 10 A to 1mA for ions, up to 5 mA for deuterons, and in energy from 0.75 up

Paris-Sud XI, Université de

46

Reducing Industrial Energy Intensity in the Southeast Project...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Authority and its project partners will establish the Southeastern Center for Industrial Energy Intensity Reduction (the Center) to inform industrial facilities about the U.S....

47

Comparison of International Energy Intensities across the G7...  

U.S. Energy Information Administration (EIA) Indexed Site

Comparison of International Energy Intensities across the G7 and other parts of Europe, including Ukraine Elizabeth Sendich November 2014 Independent Statistics & Analysis...

48

Energy End-Use Intensities in Commercial Buildings 1989 -- Executive  

U.S. Energy Information Administration (EIA) Indexed Site

9 Energy End-Use Intensities > Executive Summary 9 Energy End-Use Intensities > Executive Summary Executive Summary Energy End Uses Ranked by Energy Consumption, 1989 Energy End Uses Ranked by Energy Consumption, 1989 Source: Energy Information Administration, Office of Energy Markets and End Use, Forms EIA-871A through F of the 1989 Commercial Buildings Energy Consumption Survey. divider line The demand for energy in U.S. stores, offices, schools, hospitals, and other commercial buildings has been increasing. This report examines energy intensities in commercial buildings for nine end uses: space heating, cooling, ventilation, lighting, water heating, cooking, refrigeration, office equipment, and "other." The objective of this analysis was to increase understanding of how energy is used in commercial buildings and to identify targets for greater energy efficiency which could moderate future growth in demand.

49

PARS II Course Descriptions | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Descriptions Descriptions PARS II Course Descriptions Sign up for PARS 102 or PARS 103, depending on your project assessment role and function. PARS 104 will be offered to site contractors as part of Dekker's Contractor deployment training. # Course Name Course Description Intended Audience PARS 102 Monthly Updating and Reporting Duration: 4 hrs Introduction to PARS II, finding and selecting projects in your domain, viewing Oversight and Assessment (OA) data, viewing Contractor Project Performance (CPP) dashboards, updating your monthly status assessment, adding attachments, and running standard, pre-built reports. Individuals who do not require monthly update training will be excused approximately one half hour early. FPD and Program staff who update the OA Monthly Status, but not other OA data.

50

China targets 20% reduction in energy intensity by 2010  

Science Journals Connector (OSTI)

Though China has made great achievement in energy conservation in the last two decades, its energy consumption is increasing rapidly. In March 2006, China's government set a target for reducing its energy intensity by 20% by 2010 compared to the 2005 value. In this paper, we analyse China's current energy efficiency situations, and put forward some policy implications on energy saving.

Hua Liao; Ying Fan; Yi-Ming Wei

2009-01-01T23:59:59.000Z

51

Analysis and Decomposition of the Energy Intensity of Industries in  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Decomposition of the Energy Intensity of Industries in and Decomposition of the Energy Intensity of Industries in California Title Analysis and Decomposition of the Energy Intensity of Industries in California Publication Type Journal Article Year of Publication 2012 Authors de la du Can, Stephane Rue, Ali Hasanbeigi, and Jayant A. Sathaye Journal Energy Policy Volume 46 Pagination 234-245 Keywords california, co2 emissions, energy intensity, energy use Abstract In 2008, the gross domestic product (GDP) of California industry was larger than GDP of industry in any other U.S. states. This study analyses the energy use of and output from seventeen industry subsectors in California and performs decomposition analysis to assess the influence of different factors on California industry energy use. The logarithmic mean Divisia index method is used for the decomposition analysis. The decomposition analysis results show that the observed reduction of energy use in California industry since 2000 is the result of two main factors: the intensity effect and the structural effect. The intensity effect has started pushing final energy use downward in 2000 and has since amplified. The second large effect is the structural effect. The significant decrease of the energy-intensive "Oil and Gas Extraction" subsector's share of total industry value added, from 15% in 1997 to 5% in 2008, and the increase of the non-energy intensive "Electric and electronic equipment manufacturing" sector's share of value added, from 7% in 1997 to 30% in 2008, both contributed to a decrease in the energy intensity in the industry sector

52

EIA - AEO2010 - Energy intensity trends in AEO2010  

Gasoline and Diesel Fuel Update (EIA)

intensity trends in AEO2010 intensity trends in AEO2010 Annual Energy Outlook 2010 with Projections to 2035 Figure 17. Trends in U.S. oil prices, energy consumption, and economic output, 1950-2035 Click to enlarge » Figure source and data excel logo Energy intensity trends in AEO2010 Energy intensity—energy consumption per dollar of real GDP—indicates how much energy a country uses to produce its goods and services. From the early 1950s to the early 1970s, U.S. total primary energy consumption and real GDP increased at nearly the same annual rate (Figure 17). During that period, real oil prices remained virtually flat. In contrast, from the mid-1970s to 2008, the relationship between energy consumption and real GDP growth changed, with primary energy consumption growing at less than one-third the previous average rate and real GDP growth continuing to grow at its historical rate. The decoupling of real GDP growth from energy consumption growth led to a decline in energy intensity that averaged 2.8 percent per year from 1973 to 2008. In the AEO2010 Reference case, energy intensity continues to decline, at an average annual rate of 1.9 percent from 2008 to 2035.

53

A Comparison of Iron and Steel Production Energy Intensity in China and the U.S  

E-Print Network [OSTI]

of Iron and Steel Production Energy Use and Energy Intensityof Iron and Steel Production Energy Intensity in China andof Iron and Steel Production Energy Intensity in China and

Price, Lynn

2014-01-01T23:59:59.000Z

54

Southeastern Center for Industrial Energy Intensity Reduction  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy’s (DOE’s) Advanced Manufacturing Office (AMO; formerly the Industrial Technologies Program) has developed multiple resources and a best practices suite of tools to...

55

Energy End-Use Intensities in Commercial Buildings 1992  

U.S. Energy Information Administration (EIA) Indexed Site

Overview > Tables Overview > Tables 1992 Energy End-Use Intensities Tables Energy Consumption by End Use, 1992 Figure on Energy Consumption By End Use, 1992 Source: Energy Information Administration, Office of Energy Markets and End Use, Forms EIA-871A through F of the 1992 Commercial Buildings Energy Consumption Survey. divider line To View and/or Print Reports (requires Adobe Acrobat Reader) - Download Adobe Acrobat Reader If you experience any difficulties, visit our Technical Frequently Asked Questions. divider line Tables - (file size 31,655 bytes), pages 6. - requires Adobe Acrobat Reader Consumption of All Major Fuels by End Uses, 1992 Energy End-Use Intensities for All Major Fuels, 1992 Consumption of Electricity by End Uses, 1992 Energy End-Use Intensities for Electricity, 1992

56

High-Intensity Discharge Lighting Basics | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

High-Intensity Discharge Lighting Basics High-Intensity Discharge Lighting Basics High-Intensity Discharge Lighting Basics August 15, 2013 - 5:59pm Addthis High-intensity discharge (HID) lighting provides the highest efficacy and longest service life of any lighting type. It can save 75%-90% of lighting energy when it replaces incandescent lighting. Illustration of a high-intensity discharge (HID) lIllustration amp. The lamp is a tall cylindrical shape, and a cutout of the outer tube shows the materials inside. A long, thin cylinder called the arc tube runs through the lamp between two electrodes. The space around the arc tube is labeled as a vacuum. In a high-intensity discharge lamp, electricity arcs between two electrodes, creating an intensely bright light. Mercury, sodium, or metal halide gas

57

Energy Policy 35 (2007) 52675286 The implications of the historical decline in US energy intensity  

E-Print Network [OSTI]

Energy Policy 35 (2007) 5267­5286 The implications of the historical decline in US energy intensity 2007 Abstract This paper analyzes the influence of the long-run decline in US energy intensity change) and adjustments in the energy demand of individual industries (intensity change), and identifies

58

Energy Market Impacts of Alternative Greenhouse Gas Intensity Reduction Goals  

Gasoline and Diesel Fuel Update (EIA)

1 1 Energy Market Impacts of Alternative Greenhouse Gas Intensity Reduction Goals March 2006 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 This report was prepared by the Energy Information Administration, the independent statistical and analytical agency within the Department of Energy. The information contained herein should be attributed to the Energy Information Administration and should not be construed as advocating or reflecting any policy position of the Department of Energy or any other organization. Service Reports are prepared by the Energy Information Administration upon special request and are based on assumptions specified by the requester. Energy Information Administration / Energy Market Impacts of Alternative Greenhouse Gas Intensity Reduction Goals

59

Energy intensity in China's iron and steel sector  

E-Print Network [OSTI]

In this study, I examine the spatial and economic factors that influence energy intensity in China's iron and steel sector, namely industrial value added, renovation investment, coke consumption, and local coke supply. ...

Xu, Jingsi, M.C.P. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

60

High energy density physics generated by intense heavy ion beams  

Science Journals Connector (OSTI)

Intense ion beams from accelerators are now available to generate high energy density matter and to study astrophysical phenomena in the laboratory under controlled and reproducible conditions. A detailed unde...

D. H. H. Hoffmann; V. E. Fortov; M. Kuster; V. Mintsev…

2009-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Some Intensive and Extensive Quantities in High-Energy Collisions  

E-Print Network [OSTI]

We review the evolution of some statistical and thermodynamical quantities measured in difference sizes of high-energy collisions at different energies. We differentiate between intensive and extensive quantities and discuss the importance of their distinguishability in characterizing possible critical phenomena of nuclear collisions at various energies with different initial conditions.

A. Tawfik

2013-10-02T23:59:59.000Z

62

Thesis Oral Energy-efficient Data-intensive  

E-Print Network [OSTI]

Thesis Oral Energy-efficient Data-intensive Computing with a Fast Array of Wimpy Nodes Vijay has raised datacenter energy demand and created an increasingly large financial burden and scaling challenge: Peak energy requirements today are a significant cost of provisioning

63

Property:Description | Open Energy Information  

Open Energy Info (EERE)

This is a property of type Text. This is a property of type Text. Pages using the property "Description" Showing 25 pages using this property. (previous 25) (next 25) 1 1.5-ft Wave Flume Facility + Automated data acquisition and control system 10-ft Wave Flume Facility + Automated data acquisition and control system 11-ft Wave Flume Facility + Automated data acquisition and control system 2 2-ft Flume Facility + Automated data acquisition and control system 3 3-ft Wave Flume Facility + Automated data acquisition and control system 5 5-ft Wave Flume Facility + Automated data acquisition and control system 6 6-ft Wave Flume Facility + Automated data acquisition and control system A Alden Large Flume + Differential pressure transducers, acoustic profiling, propeller meters, load cells, computer data acquisition systems.

64

A Comparison of Iron and Steel Production Energy Intensity in China and the U.S  

E-Print Network [OSTI]

Production Energy Use and Energy Intensity in China and theGJ/t crude steel Primary Energy Intensity* kgce/t GJ/t crudeChina U.S. Final Energy Intensity No. 5b Scenarios Country

Price, Lynn

2014-01-01T23:59:59.000Z

65

Course descriptions Center for Energy Commerce  

E-Print Network [OSTI]

. History and overview of the energy industry providing basics of oil and gas exploration, production. Covers contracts utilized in petroleum exploration and production specifically: farmouts, joint operating, processing and compression. Marketing and transportation agreements. Pipeline regulation. ENCO 3385 Petroleum

Westfall, Peter H.

66

Department of Energy Commercial Building Benchmarks (New Construction): Energy Use Intensities, May 5, 2009  

Broader source: Energy.gov [DOE]

This file contains the energy use intensities (EUIs) for the benchmark building files by building type and climate zone.

67

Descriptive Model of a Generic WAMS | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS Descriptive Model of a Generic WAMS The Department of Energy's (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation's electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study. Descriptive Model of a Generic WAMS More Documents & Publications Securing Wide Area Measurement Systems 2012 Advanced Applications Research & Development Peer Review - Day 1

68

EIA - Annual Energy Outlook 2008 (Early Release)-Energy Intensity Section  

Gasoline and Diesel Fuel Update (EIA)

Intensity Intensity Annual Energy Outlook 2008 (Early Release) Energy Intensity Figure 7. Energy use per capita and per dollar of gross domestic product, 1980-2030 (index, 1980 = 1). Need help, contact the National Energy Information Center at 202-586-8800. figure data Energy intensity, measured as energy use (in thousand Btu) per dollar of GDP (in 2000 dollars), is projected to decline at an average annual rate of 1.6 percent from 2006 to 2030 in the AEO2008 reference case (Figure 7). Although energy use generally increases as the economy grows, continuing improvement in the energy efficiency of the U.S. economy and a shift to less energy-intensive activities are projected to keep the rate of energy consumption growth lower than the rate of GDP growth. Since 1992, the energy intensity of the U.S. economy has declined on

69

Technical descriptions of ten irrigation technologies for conserving energy  

SciTech Connect (OSTI)

Technical description of ten technologies which were researched to save energy in irrigated agriculture are presented. These technologies are: well design and development ground water supply system optimization, column and pump redesign, variable-speed pumping, pipe network optimization, reduced-pressure center-pivot systems, low-energy precision application, automated gated-pipe system, computerized irrigation scheduling, and instrumented irrigation scheduling. (MHR)

Harrer, B.J.; Wilfert, G.L.

1983-05-01T23:59:59.000Z

70

Energy Intensity of Federal Buildings Slashed 25% in Past Decade  

Broader source: Energy.gov [DOE]

The U.S. General Services Administration (GSA), which builds and manages federal buildings, recently announced that it cut federal energy spending by $65.5 million in fiscal year (FY) 2012 by reducing the energy use intensity levels in its buildings by nearly 25% since FY 2003.

71

Target Allocation Methodology for China's Provinces: Energy Intensity in the 12th FIve-Year Plan  

E-Print Network [OSTI]

projections of energy and intensity for the 12 th FYP werelevel projections of energy and intensity for the 12 th FYPth APPENDIX Table A-2 Energy Intensity Target Allocation

Ohshita, Stephanie

2011-01-01T23:59:59.000Z

72

SCENARIOS WITH AN INTENSIVE CONTRIBUTION OF NUCLEAR ENERGY TO THE WORLD ENERGY SUPPLY  

E-Print Network [OSTI]

1 SCENARIOS WITH AN INTENSIVE CONTRIBUTION OF NUCLEAR ENERGY TO THE WORLD ENERGY SUPPLY H of primary energy demand by 250% in 2050 we find that a nuclear intensive scenario assuming the development level. Electricity production amounts to almost 40% of the primary energy supplyi , mostly i Here

Paris-Sud XI, Université de

73

B. Appendix: Scaling of Cost with Energy and Intensity  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

B. Appendix: Scaling of Cost with Energy and Intensity B. Appendix: Scaling of Cost with Energy and Intensity With the two ongoing studies, one for the physics program, [1] and one for the accelerator and facilities [2] on the "Neutrino Factory Based on a Muon Storage Ring", a number of interesting suggestions and ideas came up. Almost immediately the question of scaling cost with the storage ring energy and with intensity came up. Nevertheless, it was impossible to explore all those questions in great detail, either in the report or in the preliminary cost estimate that is presented in Appendix A. During the study it became more and more clear, that one of the unique features of a neutrino source, namely the possibility to balance the cost of the accelerator with the cost of the detector, would urge the accelerator people to find an answer to this

74

Energy Use and Energy Intensity of the U.S. Chemical Industry | ENERGY STAR  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Intensity of the U.S. Chemical Industry Intensity of the U.S. Chemical Industry Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories

75

The decline of the world’s energy intensity  

Science Journals Connector (OSTI)

Energy intensity of the total primary energy supply (TPES), total final energy consumption (TFC) and LOSSES in the conversion from TPES to TFC were analyzed for the World, OECD and Rest of the World (ROW) countries. LOSSES increased significantly for all groups of countries due to the increase of electricity production from coal in the period studied (1971–2008). Electricity share final consumption almost doubled, increasing from 8.8% to 17.2% in the period studied. However the energy intensity of LOSSES remained practically constant, which reflects the fact that the efficiency of electricity generation from coal (the main source of electricity) remained practically constant in that period. Despite the attractiveness of end-use devices running on electricity such as computers, which is typical of modern societies, the CO2 emissions are bound to increase unless coal is replaced by less carbon emitting sources such as natural gas, renewables and nuclear energy.

José Goldemberg; Luiz Tadêo Siqueira Prado

2011-01-01T23:59:59.000Z

76

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

23 5. Comparison of Energy Intensity of Iron and Steelthe U.S. . 27 5.1. Energy Intensity of Iron and27 5.2. Energy Intensity of Iron and Steel Production in

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

77

Energy prices and energy intensity in China : a structural decomposition analysis and econometric study  

E-Print Network [OSTI]

Since the start of its economic reforms in 1978, China's energy prices relative to other prices have increased. At the same time, its energy intensity, i.e., physical energy consumption per unit of Gross Domestic Product ...

Shi, Xiaoyu, M.C.P. Massachusetts Institute of Technology

2005-01-01T23:59:59.000Z

78

The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand  

Science Journals Connector (OSTI)

...processes. Data for iron energy intensity are adapted...are adapted from Choate Green-[16]. Production...15 Smil, V . 2008 Energy in nature and society...Choate, WT , and JAS Green. 2003 US energy requirements for aluminum...

2013-01-01T23:59:59.000Z

79

Energy prices and energy intensity in China : a structural decomposition analysis and econometrics study  

E-Print Network [OSTI]

Since the start of its economic reforms in 1978, China's energy prices relative to other prices have increased. At the same time, its energy intensity, i.e., energy consumption per unit of Gross Domestic Product (GDP), has ...

Shi, Xiaoyu

2006-01-01T23:59:59.000Z

80

National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China  

E-Print Network [OSTI]

world-best-practice-energy- intensity-values-selected-World Best Practice Energy Intensity Values for Selectedof the Targets for Energy Intensity and Sulfur Dioxide in

Zhou, Nan

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

A Comparison of Iron and Steel Production Energy Use and Energy Intensity  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Comparison of Iron and Steel Production Energy Use and Energy Intensity A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S. Title A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S. Publication Type Report Year of Publication 2011 Authors Hasanbeigi, Ali, Lynn K. Price, Nathaniel T. Aden, Zhang Chunxia, Li Xiuping, and Shangguan Fangqin Date Published June/2011 Publisher Lawrence Berkeley National Laboratory; Iron & Steel Research Institute, Iron and Steel Industry Keywords energy intensity, energy use, Low Emission & Efficient Industry Abstract Production of iron and steel is an energy-intensive manufacturing process. In 2006, the iron and steel industry accounted for 13.6% and 1.4% of primary energy consumption in China and the U.S., respectively (U.S. DOE/EIA, 2010a; Zhang et al., 2010). The energy efficiency of steel production has a direct impact on overall energy consumption and related carbon dioxide (CO2) emissions. The goal of this study is to develop a methodology for making an accurate comparison of the energy intensity (energy use per unit of steelproduced) of steel production. The methodology is applied to the steel industry in China and the U.S. The methodology addresses issues related to boundary definitions, conversion factors, and indicators in order industry energy use to develop a common framework for comparing steel intensity energy use.

82

Optimization of Power-Intensive Energy Systems with Carbon Capture  

Science Journals Connector (OSTI)

Optimization of Power-Intensive Energy Systems with Carbon Capture ... Three concepts for capturing CO2 from natural gas-fired combined gas/steam turbine power plants are evaluated and compared in this paper: (A) sepn. of CO2 from exhaust gas coming from a std. ...

Xuesong Zheng; Jin-Kuk Kim

2011-09-07T23:59:59.000Z

83

Breaking of relativistically intense longitudinal space charge waves: A description using Dawson sheet model  

SciTech Connect (OSTI)

Spatio-temporal evolution of relativistically intense longitudinal space charge waves in a cold homogeneous plasma is studied analytically as well as numerically, as an initial value problem, using Dawson sheet model. It is found that, except for very special initial conditions which generates the well known longitudinal Akhiezer-Polovin mode, for all other initial conditions, the waves break through a novel mechanism called phase mixing at an amplitude well below the Akhiezer-Polovin limit. An immediate consequence of this is, that Akhiezer-Polovin waves break when subjected to arbitrarily small longitudinal perturbations. We demonstrate this by performing extensive numerical simulations. This result may be of direct relevance to ultrashort, ultraintense laser/beam pulse-plasma interaction experiments where relativistically intense waves are routinely excited.

Sengupta, Sudip, E-mail: sudip@ipr.res.in [Institute for Plasma Research, Bhat , Gandhinagar - 382428 (India)

2014-02-11T23:59:59.000Z

84

Energy end-use intensities in commercial buildings  

SciTech Connect (OSTI)

This report examines energy intensities in commercial buildings for nine end uses: space heating, cooling, ventilation, lighting, water heating, cooking, refrigeration, office equipment, and other. The objective of this analysis was to increase understanding of how energy is used in commercial buildings and to identify targets for greater energy efficiency which could moderate future growth in demand. The source of data for the analysis is the 1989 Commercial Buildings Energy Consumption survey (CBECS), which collected detailed data on energy-related characteristics and energy consumption for a nationally representative sample of approximately 6,000 commercial buildings. The analysis used 1989 CBECS data because the 1992 CBECS data were not yet available at the time the study was initiated. The CBECS data were fed into the Facility Energy Decision Screening (FEDS) system, a building energy simulation program developed by the US Department of Energy`s Pacific Northwest Laboratory, to derive engineering estimates of end-use consumption for each building in the sample. The FEDS estimates were then statistically adjusted to match the total energy consumption for each building. This is the Energy Information Administration`s (EIA) first report on energy end-use consumption in commercial buildings. This report is part of an effort to address customer requests for more information on how energy is used in buildings, which was an overall theme of the 1992 user needs study. The end-use data presented in this report were not available for publication in Commercial Buildings Energy Consumption and Expenditures 1989 (DOE/EIA-0318(89), Washington, DC, April 1992). However, subsequent reports on end-use energy consumption will be part of the Commercial Buildings Energy Consumption and Expenditures series, beginning with a 1992 data report to be published in early 1995.

Not Available

1994-09-01T23:59:59.000Z

85

EIA Energy Efficiency-Residential Sector Energy Intensities, 1978-2001  

U.S. Energy Information Administration (EIA) Indexed Site

Residential Sector Energy Intensities Residential Sector Energy Intensities RESIDENTIAL SECTOR ENERGY INTENSITIES: 1978-2005 Released Date: August 2004 Page Last Modified:June 2009 These tables provide estimates of residential sector energy consumption and energy intensities for 1978 -1984, 1987, 1990, 1993, 1997, 2001 and 2005 based on the Residential Energy Consumption Survey (RECS). Total Site Energy Consumption (U.S. and Census Region) Html Excel PDF By Type of Housing Unit (Table 1a) html Table 1a excel table 1a. excel table 1a. Weather-Adjusted by Type of Housing Unit (Table 1b) html table 1b excel table 1b excel table 1b Total Primary Energy Consumption (U.S. and Census Region) By Type of Housing Unit (Table 1c) html Table 1c excel table 1c excel table 1c Weather-Adjusted by Type of Housing Unit (Table 1d)

86

Property:OpenEI/PageDescription | Open Energy Information  

Open Energy Info (EERE)

PageDescription PageDescription Jump to: navigation, search This is a property of type Text. Pages using the property "OpenEI/PageDescription" Showing 25 pages using this property. (previous 25) (next 25) 1 1 Solar Inc + 1-Solar Inc: energy company profile. 10Charge Inc + 10Charge Inc: energy company profile. 11th Annual Workshop on Greenhouse Gas Emission Trading + "The IEA-IETA-EPRI Emissions Trading Workshop has been held annually at the headquarters of the International Energy Agency since 2000. This international workshop focuses on developments in greenhouse gas (GHG) emissions trading around the world at the international, national and sub-national level. The 2011 workshop will cover topics relevant to the development of global, national and sub-national carbon markets, including scaled-up and new market mechanisms, NAMAs and sectoral crediting policies, MRV and international GHG accounting and 2nd-best trading programmes. As in previous years, the workshop will assemble representatives from government, business and independent research organisations to discuss advances in various national GHG markets, as well as the future of carbon trading and the "shuffle" to the COP 17 meeting in Durban."

87

Table 6. Energy intensity by state (2000 - 2010  

U.S. Energy Information Administration (EIA) Indexed Site

Energy intensity by state (2000 - 2010)" Energy intensity by state (2000 - 2010)" "thousand Btu per dollar of GDP" ,,,,,,,,,,,,"Change" ,,,,,,,,,,,,"2000 to 2010" "State",2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,"Percent","Absolute" "Alabama",18.27258197,17.12573602,17.40982338,17.21199023,16.87274619,16.36600572,16.26201029,16.16667416,15.88996309,15.31511861,15.97051076,-0.1259849985,-2.302071213 "Alaska",21.74118991,20.61708506,19.78031734,20.18143227,20.28953911,21.09573287,18.72961653,17.79373817,15.85124571,14.13669694,14.24461661,-0.3448097058,-7.496573297 "Arizona",8.723022426,8.474435286,8.399371812,7.993493579,8.274516227,7.602521438,7.232690272,7.328159916,7.62679414,7.507000095,7.628169778,-0.1255129924,-1.094852647

88

A2E: Adaptively Aggressive Energy Efficient DVFS Scheduling for Data Intensive Applications  

E-Print Network [OSTI]

A2E: Adaptively Aggressive Energy Efficient DVFS Scheduling for Data Intensive Applications Li Tan strategy to achieve energy efficiency for data intensive applications, and further save energy via five memory and disk access intensive benchmarks with imbalanced branches against another two energy

89

Applicable EPA Regulations and Description Website | Open Energy...  

Open Energy Info (EERE)

Description Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Applicable EPA Regulations and Description Website Abstract This website provides...

90

Fact #554: January 19, 2009 Energy Intensity of Light Rail Transit...  

Broader source: Energy.gov (indexed) [DOE]

4: January 19, 2009 Energy Intensity of Light Rail Transit Systems Fact 554: January 19, 2009 Energy Intensity of Light Rail Transit Systems According to the 2007 National Transit...

91

Contributions of weather and fuel mix to recent declines in U.S. energy and carbon intensity  

E-Print Network [OSTI]

of the decrease in energy intensity during the study period,trends in U. S. energy intensity: An index number analysis,industry structure and energy intensity, Energy Economics

Davis, W. Bart; Sanstad, Alan H.; Koomey, Jonathan G.

2002-01-01T23:59:59.000Z

92

A STAGED MUON-BASED FACILITY TO ENABLE INTENSITY AND ENERGY FRONTIER SCIENCE IN THE US*  

E-Print Network [OSTI]

A STAGED MUON-BASED FACILITY TO ENABLE INTENSITY AND ENERGY FRONTIER SCIENCE IN THE US* Jean. It requires facilities at both high energy and high intensity frontiers. Neutrino oscillations are irrefutable precision flavour physics at the high intensity frontier. At the high energy frontier, a multi-TeV lepton

McDonald, Kirk

93

Multi-energy CT Based on a Prior Rank, Intensity and Sparsity Model (PRISM)  

E-Print Network [OSTI]

Multi-energy CT Based on a Prior Rank, Intensity and Sparsity Model (PRISM) Hao Gao1 , Hengyong Yu2 spectrum. Besides, the energy-dependent intensity information can be incorporated into the PRISM in terms on the generalized rank and sparsity of a multi-energy image, and intensity/spectral characteristics of base

Soatto, Stefano

94

Energy Integration Describes Sound-Intensity Coding in an Insect Auditory System  

E-Print Network [OSTI]

Energy Integration Describes Sound-Intensity Coding in an Insect Auditory System Tim Gollisch receptor; hearing; sound intensity; energy; model; locust Auditory receptor cells are commonly measurements of intensity-duration tradeoffs sug- gest that the stimulus energy is the crucial variable (Garner

Benda, Jan

95

Effect of pulse intensity distributions on fragment internal energy in the infrared multiphoton dissociation of vinyl  

E-Print Network [OSTI]

Effect of pulse intensity distributions on fragment internal energy in the infrared multiphoton of laser intensity on the production of fragment energy distribu- tions. Laser induced fluorescence (LIF pumping is pro- portional to the light intensity, the final energy of the parent molecule

Zare, Richard N.

96

EIA Energy Efficiency-Iron and Steel Energy Intensity, 1998-2002  

Gasoline and Diesel Fuel Update (EIA)

Iron and Steel Manufacturing Energy Intensities, 1998, 2002, and 2006 Below are data for iron and steel industry from the 1998, 2002, and 2006 Manufacturing Energy Consumption Survey (MECS). The tables provide estimates for energy consumed for all purposes, end uses of fuel consumption, offsite-produced fuel consumption, expenditures for purchased energy, as well as energy intensities per value of production and per ton of steel. Energy Consumption 1998, 2002, and 2006 Table 1. Consumption of Energy for All Purposes (First Use) html Table 1 excel table 1. pdf table 1. Table 2. End Uses of Fuel Consumption html table 2. excel table 2. pdf table 2. Table 3. Offsite-Produced Fuel Consumption html table 3. excel table 3. pdf table 3. Table 4. Expenditures for Purchased Energy

97

Target Allocation Methodology for China's Provinces: Energy Intensity in the 12th FIve-Year Plan  

E-Print Network [OSTI]

energy intensity (energy per unit GDP) in the 11 th FYP. Forintensity (total energy per unit GDP)  industrial energyof total (primary) energy per unit GDP in fixed 2005 RMB [

Ohshita, Stephanie

2011-01-01T23:59:59.000Z

98

HIGH INTENSITY LOW-ENERGY POSITRON SOURCE AT JEFFERSON  

SciTech Connect (OSTI)

We present a novel concept of a low-energy e{sup +} source with projected intensity on the order of 10{sup 10} slow e{sup +}/s. The key components of this concept are a continuous wave e{sup -} beam, a rotating positron-production target, a synchronized raster/anti-raster, a transport channel, and extraction of e{sup +} into a field-free area through a magnetic plug for moderation in a cryogenic solid. Components were designed in the framework of GEANT4-based (G4beamline) Monte Carlo simulation and TOSCA magnetic field calculation codes. Experimental data to demonstrate the effectiveness of the magnetic plug is presented.

Serkan Golge, Bogdan Wojtsekhowski, Branislav Vlahovic

2012-07-01T23:59:59.000Z

99

The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand  

Science Journals Connector (OSTI)

...data for embodied energy comes from Ashby-[10], for material prices for metals from the...10]. Plastic prices are for year 2011...2009. Figure 7. Energy intensity e versus...Natl Acad. Sci. USA 107, 20 905-20...an environmental history of the twentieth-century...

2013-01-01T23:59:59.000Z

100

Contributions of weather and fuel mix to recent declines in U.S. energy and carbon intensity  

E-Print Network [OSTI]

in a lower energy-and-carbon-intensive mix of economicintensity into fuel mix and energy intensity terms. Thisof fuel mix and weather on energy and carbon intensity using

Davis, W. Bart; Sanstad, Alan H.; Koomey, Jonathan G.

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Energy intensity and the energy mix: What works for the environment?  

Science Journals Connector (OSTI)

Abstract In the absence of carbon sequestration, mitigating carbon emissions can be achieved through a mix of two broad policy approaches: (i) reducing energy intensity by improving energy efficiency and conservation, and (ii) changing the fuel mix. This paper investigates the long-run relationship between energy intensity, the energy mix, and per capita carbon emissions; while controlling for the level of economic activity, the economic structure measured by the relative size of the manufacturing sector, and the differences in institutional qualities across countries. We aim to answer two particularly important policy questions. First, to what extent these policy approaches are effective in mitigating emissions in the long-run? Second, which institutional qualities significantly contribute to better long-run environmental performance? We use historical data for 131 countries in a heterogeneous panel framework for the period 1972–2010. We find that less dependence on fossil fuel and lower energy intensity reduce emissions in the long run. A goal of 10% reduction in CO2 levels in the long-run requires reducing the share of fossil fuel in total energy use by 11%, or reducing energy intensity by 13%. In addition, specific institutional qualities such as better corruption control and judiciary independence contribute to mitigating levels of emissions.

Amany A. El Anshasy; Marina-Selini Katsaiti

2014-01-01T23:59:59.000Z

102

Present and future perspectives for high energy density physics with intense heavy ion and laser beams  

E-Print Network [OSTI]

Present and future perspectives for high energy density physics with intense heavy ion and laser18, deliver an intense uranium beam that deposit about 1 kJ0g specific energy in solid matter. Using 2004! Abstract Intense heavy ion beams from the Gesellschaft für Schwerionenforschung ~GSI, Darmstadt

103

Physics of neutralization of intense high-energy ion beam pulses by electronsa...  

E-Print Network [OSTI]

Physics of neutralization of intense high-energy ion beam pulses by electronsa... I. D. Kaganovich beams,13 the physics of solar flares,14 high-intensity high- energy particle beam propagation Neutralization and focusing of intense charged particle beam pulses by electrons form the basis for a wide range

Kaganovich, Igor

104

ISSUANCE 2015-01-26: Energy Conservation Program: Energy Conservation Standards for High-Intensity Lamps, Notice to Reopen Comment Period  

Broader source: Energy.gov [DOE]

Energy Conservation Program: Energy Conservation Standards for High-Intensity Lamps, Notice to Reopen Comment Period

105

An Analysis of Residential Energy Intensity in Iran, A System Dynamics Approach  

E-Print Network [OSTI]

Abstract: substantial development of counties needs to use the resources in an efficient way. One indicator that shows the degree of efficient use of energy resources is energy intensity. Statistics show that Iran’s energy intensity was in a bad situation during past years and if this manner of using energy resources continues, it will get worse.In this study a system dynamics approach is used to model changes of energy intensity in residential sector in Iran. By implementation and simulation of this model we found some reasons of this problem in Iran. Then we tried to introduce some policies to make steady improvement in energy intensity in the future. Keywords:

Mohamed M. Jamshidi

106

ITP Energy Intensive Processes: Energy-Intensive Processes Portfolio: Addressing Key Energy Challenges Across U.S. Industry  

Broader source: Energy.gov [DOE]

Portfolio of projects focused on investments in high-impact, crosscutting opportunities that provide significant energy savings and carbon reductions across a broad industrial base

107

Table 22. Energy Intensity, Projected vs. Actual Projected  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Intensity, Projected vs. Actual Energy Intensity, Projected vs. Actual Projected (quadrillion Btu / real GDP in billion 2005 chained dollars) 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 AEO 1994 11.2 11.1 11.0 10.8 10.7 10.5 10.4 10.3 10.1 10.0 9.9 9.8 9.7 9.6 9.5 9.4 9.3 9.2 AEO 1995 10.9 10.8 10.6 10.4 10.3 10.1 10.0 9.9 9.8 9.6 9.5 9.4 9.3 9.2 9.1 9.1 9.0 AEO 1996 10.7 10.6 10.4 10.3 10.1 10.0 9.8 9.7 9.6 9.5 9.4 9.3 9.2 9.2 9.1 9.0 8.9 AEO 1997 10.3 10.3 10.2 10.1 9.9 9.8 9.7 9.6 9.5 9.4 9.3 9.2 9.2 9.1 9.0 8.9 AEO 1998 10.1 10.1 10.1 10.0 9.9 9.8 9.7 9.6 9.5 9.5 9.4 9.3 9.2 9.1 9.0 AEO 1999 9.6 9.7 9.7 9.7 9.6 9.4 9.3 9.1 9.0 8.9 8.8 8.7 8.6 8.5 AEO 2000 9.4 9.4 9.3 9.2 9.1 9.0 8.9 8.8 8.7 8.7 8.6 8.5 8.4 AEO 2001 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.4

108

Could energy-intensive industries be powered by carbon-free electricity?  

Science Journals Connector (OSTI)

...Gutowski and Ernst Worrell Could energy-intensive industries be powered...MacKay, DJC . 2008 Sustainable energy-without the hot air. Cambridge...com . 3 Gallman, PG . 2011 Green alternatives and national energy strategy: the facts behind the...

2013-01-01T23:59:59.000Z

109

Determinants of energy intensity in industrialized countries : a comparison of China and India  

E-Print Network [OSTI]

The amount of final energy per unit of economic output (usually in terms of gross domestic product, or GDP), known as energy intensity, is often used to measure the effectiveness of energy use and the consumption patterns ...

Huang, Feiya

2006-01-01T23:59:59.000Z

110

Going beyond energy intensity to understand the energy metabolism of nations: The case of Argentina  

Science Journals Connector (OSTI)

The link between energy consumption and economic growth has been widely studied in the economic literature. Understanding this relationship is important from both an environmental and a socio-economic point of view, as energy consumption is crucial to economic activity and human environmental impact. This relevance is even higher for developing countries, since energy consumption per unit of output varies through the phases of development, increasing from an agricultural stage to an industrial one and then decreasing for certain service based economies. In the Argentinean case, the relevance of energy consumption to economic development seems to be particularly important. While energy intensity seems to exhibit a U-Shaped curve from 1990 to 2003 decreasing slightly after that year, total energy consumption increases along the period of analysis. Why does this happen? How can we relate this result with the sustainability debate? All these questions are very important due to Argentinean hydrocarbons dependence and due to the recent reduction in oil and natural gas reserves, which can lead to a lack of security of supply. In this paper we study Argentinean energy consumption pattern for the period 1990–2007, to discuss current and future energy and economic sustainability. To this purpose, we developed a conventional analysis, studying energy intensity, and a non conventional analysis, using the Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism (MuSIASEM) accounting methodology. Both methodologies show that the development process followed by Argentina has not been good enough to assure sustainability in the long term. Instead of improving energy use, energy intensity has increased. The current composition of its energy mix, and the recent economic crisis in Argentina, as well as its development path, are some of the possible explanations.

Marina Recalde; Jesús Ramos-Martin

2012-01-01T23:59:59.000Z

111

CHEM 740: ENERGIES, INTENSITIES AND POTENTIALS: CONCEPTS AND TOOLS IN SPECTROSCOPY  

E-Print Network [OSTI]

1 CHEM 740: ENERGIES, INTENSITIES AND POTENTIALS: CONCEPTS AND TOOLS IN SPECTROSCOPY Fall 2001 Instructor: R.J. Le Roy Wednesday Evenings The patterns of energy levels and transition intensities observed energy curves or surfaces characterizing the forces between the component atoms. This course will discuss

Le Roy, Robert J.

112

Optimization Intensive Energy Harvesting Mahsan Rofouei, Mohammad Ali Ghodrat, Miodrag Potkonjak  

E-Print Network [OSTI]

Optimization Intensive Energy Harvesting Mahsan Rofouei, Mohammad Ali Ghodrat, Miodrag Potkonjak of primary limiting factors of MSs is their energy sensitivity. In order to overcome this limitation, we have developed an optimization intensive approach for energy harvesting. Our goal is to size and position

Potkonjak, Miodrag

113

Reducing Industrial Energy Intensity in the Southeast Project Fact Sheet  

Broader source: Energy.gov [DOE]

This fact sheet contains details regarding a Save Energy Now industrial energy efficiency project that the U.S. Department of Energy funded in Mississippi.

114

World Best Practice Energy Intensity Values for Selected Industrial Sectors  

E-Print Network [OSTI]

report describes best practices in energy efficiency for keyImproving Energy Efficiency of shape casting. Best practice

Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

2007-01-01T23:59:59.000Z

115

Estimating material and energy intensities of urban areas  

E-Print Network [OSTI]

The objective of this thesis is to develop methods to estimate, analyze and visualize the resource intensity of urban areas. Understanding the resource consumption of the built environment is particularly relevant in cities ...

Quinn, David James, Ph. D. Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

116

Modeling the time and energy behavior of the GCR intensity in the periods of low activity around the last three solar minima  

E-Print Network [OSTI]

Using the simple model for the description of the GCR modulation in the heliosphere and the sets of parameters discussed in the accompanying paper we model some features of the time and energy behavior of the GCR intensity near the Earth observed during periods of low solar activity around three last solar minima. In order to understand the mechanisms underlying these features in the GCR behavior, we use the suggested earlier decomposition of the calculated intensity into the partial intensities corresponding to the main processes (diffusion, adiabatic losses, convection and drifts).

Krainev, M B; Kalinin, M S; Svirzhevskaya, A K; Svirzhevsky, N S

2014-01-01T23:59:59.000Z

117

Improved Product Energy Intensity Benchmarking Metrics for Thermally Concentrated Food Products  

Science Journals Connector (OSTI)

Improved Product Energy Intensity Benchmarking Metrics for Thermally Concentrated Food Products ... Sogut, Z.; Ilten, N.; Oktay, Z.Energetic and exergetic performance evaluation of the quadruple-effect evaporator unit in tomato paste evaporation Energy 2010, 35, 3821– 3826 ...

Michael E. Walker; Craig S. Arnold; David J. Lettieri; Margot J. Hutchins; Eric Masanet

2014-09-12T23:59:59.000Z

118

Optically Interconnected Data Center Architecture for Bandwidth Intensive Energy Efficient Networking  

E-Print Network [OSTI]

Optically Interconnected Data Center Architecture for Bandwidth Intensive Energy Efficient) 854 2900, e-mail: howard@ee.columbia.edu ABSTRACT The relentless rise of data-intensive cloud will either be prohibitively costly, overly complex, or result in unsustainable energy requirements. Network

Bergman, Keren

119

Mapping the Energy Distribution of SERRS Hot Spots from Anti-Stokes to Stokes Intensity Ratios  

E-Print Network [OSTI]

Mapping the Energy Distribution of SERRS Hot Spots from Anti- Stokes to Stokes Intensity Ratios in the anti-Stokes to Stokes intensity ratios in single-molecule surface-enhanced resonance Raman scattering-enhanced Raman scattering. Moreover, a methodology to estimate the distribution of resonance energies

Brolo, Alexandre G.

120

World Best Practice Energy Intensity Values for Selected Industrial Sectors  

E-Print Network [OSTI]

and 30% of total energy consumption in China. During the30 kWh/ADt 54 for total energy consumption of 11.2 GJ/ADt (leads to a total overall energy consumption value of 11.1

Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Property:Distributed Generation/Site Description | Open Energy Information  

Open Energy Info (EERE)

Generation/Site Description Generation/Site Description Jump to: navigation, search This is a property of type String. The allowed values for this property are: Agricultural Commercial-Hotel Commercial-Ice Arena Commercial-High Rise Office Commercial-Low Rise Office Commercial-Refrigerated Warehouse Commercial-Restaurant Commercial-Retail Store Commercial-Supermarket Commercial-Theater Commercial-Other Institutional-Hospital/Health Care Institutional-Nursing Home Institutional-School/University Institutional-Other Residential-Multifamily-Single Building Residential-Multifamily-Multibuilding Residential-Single Family Industrial-Food Processing Industrial-Plastics Processing Industrial-Wood Products Industrial-Other Testing Laboratory Water Utility Other Utility Other Pages using the property "Distributed Generation/Site Description"

122

Modelling of CO2 content in the atmosphere until 2300: influence of energy intensity of gross domestic product and carbon intensity of energy  

Science Journals Connector (OSTI)

The study provides a model of CO2 content in the atmosphere based on the global carbon cycle and the Kaya identity. The influences of: 1) energy intensity of GDP; 2) carbon intensity of energy on CO2 trajectories are given under four scenarios. The results from the most optimistic and technologically challenging scenario show that the atmospheric CO2 concentration can stabilise at 610 ppmv. It is also shown that the annual growth rates of atmospheric CO2 peak for all the scenarios before 2100 due to the expected world population peak in 2075 and the large share of fossil fuel energy.

Wojciech M. Budzianowski

2013-01-01T23:59:59.000Z

123

PNNL Data-Intensive Computing for a Smarter Energy Grid  

SciTech Connect (OSTI)

The Middleware for Data-Intensive Computing (MeDICi) Integration Framework, an integrated platform to solve data analysis and processing needs, supports PNNL research on the U.S. electric power grid. MeDICi is enabling development of visualizations of grid operations and vulnerabilities, with goal of near real-time analysis to aid operators in preventing and mitigating grid failures.

Carol Imhoff; Zhenyu (Henry) Huang [Henry; Daniel Chavarria

2009-11-01T23:59:59.000Z

124

PNNL Data-Intensive Computing for a Smarter Energy Grid  

ScienceCinema (OSTI)

The Middleware for Data-Intensive Computing (MeDICi) Integration Framework, an integrated platform to solve data analysis and processing needs, supports PNNL research on the U.S. electric power grid. MeDICi is enabling development of visualizations of grid operations and vulnerabilities, with goal of near real-time analysis to aid operators in preventing and mitigating grid failures.

Carol Imhoff; Zhenyu (Henry) Huang; Daniel Chavarria

2012-12-31T23:59:59.000Z

125

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

to be world average energy intensities for the production ofWorld Steel Association (worldsteel) since imported products can be from different countries and will thus vary in their energy consumption during production

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

126

DRAFT DO NOT QUOTE Energy Prices and Energy Intensity in China: A Structural Decomposition Analysis and Econometrics Study  

E-Print Network [OSTI]

Since the start of its economic reforms in 1978, China's energy prices relative to other prices have increased. At the same time, its energy intensity, i.e., energy consumption per unit of Gross Domestic Product (GDP), has declined dramatically, by about 70%, in spite of increases in energy consumption. Is this just a coincidence? Or does a systematic relationship exist between energy prices and energy intensity? In this study, we examine whether and how China’s energy price changes affect its energy intensity trend during 1980-2002 at a macro level. We conduct the research by using two complementary economic models: the input-output-based structural decomposition analysis (SDA) and econometric regression models and by using a decomposition method of own-price elasticity of energy intensity. Findings include a negative own-price elasticity of energy intensity, a price-inducement effect on energyefficiency improvement, and a greater sensitivity (in terms of the reaction of energy intensity towards changes in energy prices) of the industry sector, compared to the overall economy. Analysts can use these results as a starting point for China's energy and carbon

Xiaoyu Shi; Karen R. Polenske; Xiaoyu Shi; Karen R. Polenske

2005-01-01T23:59:59.000Z

127

Energy Production, Frictional Dissipation, and Maximum Intensity of a Numerically Simulated Tropical Cyclone  

E-Print Network [OSTI]

0 Energy Production, Frictional Dissipation, and Maximum Intensity of a Numerically Simulated) viewed as a heat engine converts heat energy extracted from the ocean to kinetic energy of the TC, which is eventually dissipated due to surface friction. Since the energy production rate is a linear function while

Wang, Yuqing

128

Energy Production, Frictional Dissipation, and Maximum Intensity of a Numerically Simulated Tropical Cyclone*  

E-Print Network [OSTI]

Energy Production, Frictional Dissipation, and Maximum Intensity of a Numerically Simulated as a heat engine converts heat energy extracted from the ocean into the kinetic energy of the TC, which is eventually dissipated due to surface friction. Since the energy production rate is a linear function while

Wang, Yuqing

129

Property:Description of Camera Types | Open Energy Information  

Open Energy Info (EERE)

Camera Types Camera Types Jump to: navigation, search Property Name Description of Camera Types Property Type Text Pages using the property "Description of Camera Types" Showing 25 pages using this property. (previous 25) (next 25) A Alden Large Flume + fully-submersible; multiplexor for four cameras; digital recording from all cameras; digital handheld Alden Small Flume + fully-submersible; multiplexor for four cameras; digital recording from all cameras; digital handheld Alden Tow Tank + Fully-submersible; multiplexor for four cameras; digital recording from all cameras; digital handheld Alden Wave Basin + Fully-submersible; multiplexor for four cameras; digital recording from all cameras; digital handheld C Conte Large Flume + Conventional underwater video, 4; high speed (1000 fps), 1

130

HEAT THAT GROWS ON TREES Short description of timber energy  

E-Print Network [OSTI]

to an energy system in which solar, wind, nuclear, geothermal and hydroelectric power will supply more than 80

131

Energy End-Use Intensities in Commercial Buildings 1989 data -- Publication  

U.S. Energy Information Administration (EIA) Indexed Site

End-Use Intensities Executive Summary > Publication and Tables End-Use Intensities Executive Summary > Publication and Tables Publication and Tables Energy End Uses Ranked by Energy Consumption, 1989 Figure on Energy End Uses Ranked by Energy Consumption, 1989 Source: Energy Information Administration, Office of Energy Markets and End Use, Forms EIA-871A through F of the 1989 Commercial Buildings Energy Consumption Survey. Divider Bar To View and/or Print Reports (requires Adobe Acrobat Reader) - Download Adobe Acrobat Reader If you experience any difficulties, visit our Technical Frequently Asked Questions. Divider Bar You have the option of downloading the entire report or selected sections of the report. Full Report - Energy End-Use Intensities in Commercial Buildings (1989 data) (file size .89 MB) pages: 140

132

Policies for eliminating low-efficiency production capacities and improving energy efficiency of energy-intensive industries in China  

Science Journals Connector (OSTI)

Abstract China faced the greatest challenge in balancing its economic growth, energy and resource security as well as environmental pollution. The energy-intensive industries, which used to be the major force driving China?s economic growth, had seriously exhausted the countries? natural resources and energy, and at the same time polluted the environment because of the severe surplus of low-efficiency production capacities. As a result, the Chinese government had initiated multiple economic and administrative policies to eliminate these low-efficiency production capacities intended to improve the energy efficiency of energy-intensive industries. These policies are summarized in this paper, along with export tax rebating rate, resource tax, administrative audit and approvals, differential electric power pricing and shutting down the low-efficiency production capacities. The paper also evaluates the effects of these policies by analyzing several key indicators about the energy-intensive industries, including fixed asset investment growth rate, energy-intensity of industrial added-value, waste gas emission-intensity of industrial added-value. The VALDEX methodology is selected to examine the improving trends of energy-efficiency for energy-intensive industries. The analyzing results show that firstly the development of low-efficiency capacities tends to be more sensitive to the policies, so the policies that China had enacted really exert very important effects on improving the energy-efficiency of energy-intensive industries. However, the effects of economic policies seem more faster and obvious than the fiscal policies. Besides, the results also show that polices which are designed to reserve energy may not necessarily exert the same effects on reducing emissions. There is still large room for improving the energy efficiency of energy-intensive industries, substantial improvement still needs to be done for current policies’ system. Some suggestions for future work are provided.

Li Li; Jianjun Wang; Zhongfu Tan; Xinquan Ge; Jian Zhang; Xiaozhe Yun

2014-01-01T23:59:59.000Z

133

World Best Practice Energy Intensity Values for Selected Industrial Sectors  

E-Print Network [OSTI]

Heat of reaction Steam, heating and losses Fractionation and compression Separation Total Note: Primary energy includes electricity generation, transmission, and distribution losses

Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

2007-01-01T23:59:59.000Z

134

ITP Energy Intensive Processes: Improved Heat Recovery in Biomass...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

INDUSTRIAL TECHNOLOGIES PROGRAM Improved Heat Recovery in Biomass-Fired Boilers Reducing Superheater Corrosion to Enable Maximum Energy Effi ciency This project will develop...

135

The structure and intensity of energy use: Trends in five OECD nations  

SciTech Connect (OSTI)

This paper examines trends in the structure and intensity of final energy demand in five OECD nations between 1973 and 1988. Our focus is on primary energy use, which weights fuels by their thermal content and multiplies district heat and electricity by factors of 1.15 and 3.24 to approximate the losses that occur in the conversion and distribution of these energy carriers. Growth in the level of energy-using activities, given 1973 energy intensities (energy use per unit of activity), would have raised primary energy use by 47% in the US, 44% in Norway, 33% in Denmark, 37% in West Germany, and 54% in Japan. Reductions in end-use energy intensities, given 1973 activity levels, would have reduced primary energy use by 20% in the US, 3% in Norway, 20% in Denmark, 17% in West Germany, and 14% in Japan. Growth in national income parallelled increases in a weighted index of energy-using activities in the US, West Germany, and Denmark but substantially outstripped activity growth in Norway and Japan. We conclude that changes in the structure of a nation's economy may lead to substantial changes in its energy/GDP ratio that are unrelated to changes in the technical efficiency of energy utilization. Similarly, changes in energy intensities may be greater or less than the aggregate change in the energy/GDP ratio of a given country, a further warning that this ratio may be an unreliable indicator of technical efficiency.

Howarth, R.B.; Schipper, L.; Andersson, B.

1992-06-01T23:59:59.000Z

136

The structure and intensity of energy use: Trends in five OECD nations  

SciTech Connect (OSTI)

This paper examines trends in the structure and intensity of final energy demand in five OECD nations between 1973 and 1988. Our focus is on primary energy use, which weights fuels by their thermal content and multiplies district heat and electricity by factors of 1.15 and 3.24 to approximate the losses that occur in the conversion and distribution of these energy carriers. Grouch in the level of energy-using activities, given 1973 energy intensities (energy use per unit of activity), would have raised primary energy use by 46% in the US, 42% in Norway, 33% in Denmark, 37% in West Germany, and 53% in Japan. Reductions in end-use energy intensities, given 1973 activity levels, would have reduced primary energy use by 19% in the US, 3% in Norway, 20% in Denmark, 15% in West Germany, and l4% in Japan. Growth in national income parallelled increases in a weighted index of energy-using activities in the US, West Germany, and Denmark but substantially outstripped activity growth in Norway and Japan. We conclude that changes in the structure of a nation's economy may lead to substantial changes in its energy/GDP ratio that are unrelated to changes in the technical efficiency of energy utilization. Similarly, changes in energy intensities may be greater or less than the aggregate change in the energy/GDP ratio of a given country, a further warning that this ratio may be an unreliable indicator of technical efficiency.

Howarth, R.B.; Schipper, L. (Lawrence Berkeley Lab., CA (United States)); Andersson, B. (Stockholm School of Economics (Sweden))

1992-09-01T23:59:59.000Z

137

The structure and intensity of energy use: Trends in five OECD nations  

SciTech Connect (OSTI)

This paper examines trends in the structure and intensity of final energy demand in five OECD nations between 1973 and 1988. Our focus is on primary energy use, which weights fuels by their thermal content and multiplies district heat and electricity by factors of 1.15 and 3.24 to approximate the losses that occur in the conversion and distribution of these energy carriers. Growth in the level of energy-using activities, given 1973 energy intensities (energy use per unit of activity), would have raised primary energy use by 47% in the US, 44% in Norway, 33% in Denmark, 37% in West Germany, and 54% in Japan. Reductions in end-use energy intensities, given 1973 activity levels, would have reduced primary energy use by 20% in the US, 3% in Norway, 20% in Denmark, 17% in West Germany, and 14% in Japan. Growth in national income parallelled increases in a weighted index of energy-using activities in the US, West Germany, and Denmark but substantially outstripped activity growth in Norway and Japan. We conclude that changes in the structure of a nation`s economy may lead to substantial changes in its energy/GDP ratio that are unrelated to changes in the technical efficiency of energy utilization. Similarly, changes in energy intensities may be greater or less than the aggregate change in the energy/GDP ratio of a given country, a further warning that this ratio may be an unreliable indicator of technical efficiency.

Howarth, R.B.; Schipper, L.; Andersson, B.

1992-06-01T23:59:59.000Z

138

The structure and intensity of energy use: Trends in five OECD nations. Revision  

SciTech Connect (OSTI)

This paper examines trends in the structure and intensity of final energy demand in five OECD nations between 1973 and 1988. Our focus is on primary energy use, which weights fuels by their thermal content and multiplies district heat and electricity by factors of 1.15 and 3.24 to approximate the losses that occur in the conversion and distribution of these energy carriers. Grouch in the level of energy-using activities, given 1973 energy intensities (energy use per unit of activity), would have raised primary energy use by 46% in the US, 42% in Norway, 33% in Denmark, 37% in West Germany, and 53% in Japan. Reductions in end-use energy intensities, given 1973 activity levels, would have reduced primary energy use by 19% in the US, 3% in Norway, 20% in Denmark, 15% in West Germany, and l4% in Japan. Growth in national income parallelled increases in a weighted index of energy-using activities in the US, West Germany, and Denmark but substantially outstripped activity growth in Norway and Japan. We conclude that changes in the structure of a nation`s economy may lead to substantial changes in its energy/GDP ratio that are unrelated to changes in the technical efficiency of energy utilization. Similarly, changes in energy intensities may be greater or less than the aggregate change in the energy/GDP ratio of a given country, a further warning that this ratio may be an unreliable indicator of technical efficiency.

Howarth, R.B.; Schipper, L. [Lawrence Berkeley Lab., CA (United States); Andersson, B. [Stockholm School of Economics (Sweden)

1992-09-01T23:59:59.000Z

139

Topological description of the Stone-Wales defect formation energy in carbon nanotubes and graphene  

E-Print Network [OSTI]

Topological description of the Stone-Wales defect formation energy in carbon nanotubes and graphene,10,12,16,18,26 The reported values for SW defect formation energies both in carbon nanotubes and graphene8 energies depend largely on the nanotube radius, the orientation of the dislocation dipole, and, to a lesser

Daw, Murray S.

140

FY 2013 EL Program Description EL Program: Net-Zero Energy, High-Performance  

E-Print Network [OSTI]

, which are buildings that generate as much energy through renewable means as is consumed by the buildingFY 2013 EL Program Description EL Program: Net-Zero Energy, High-Performance Buildings-Efficient Manufacturing, Materials, and Infrastructure Summary: Buildings account for 41 % of the primary energy

Magee, Joseph W.

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

SAMPLE INTERNSHIP DESCRIPTION NOT CURRENTLY OPEN FOR INFORMATION ONLY Renewable Energy Internship  

E-Print Network [OSTI]

who promote the implementation of clean, renewable energy in the Northwest region (Washington, Oregon. Collect information on the economic impacts of the wind and solar energy industries in the NorthwestSAMPLE INTERNSHIP DESCRIPTION ­ NOT CURRENTLY OPEN ­ FOR INFORMATION ONLY Renewable Energy

142

Carbon dioxide emissions intensity of Portuguese industry and energy sectors: A convergence analysis and econometric approach  

Science Journals Connector (OSTI)

Abstract Given the relevance of energy and pollution issues for industrialised countries and the importance of industry and energy sectors to the achievement of their economic and environmental goals, it is important to know if there is a common pattern of emissions intensity, fuel intensity and energy intensity, between industries, to know if it justifies a more specific application of energy policies between sectors, which sectors have the greatest potential for reducing energy use and which are the long term effects of those specific variables on the mitigation of emissions. We found that although there is literature on decomposition of effects that affect emissions, the study of the convergence and of the relationships between these variables does not include ratios or effects that result from the decomposition analysis. Thus, the above questions are not answered, much less for the Portuguese reality. The purpose of this paper is to study: (i) the existence of convergence of some relevant ratios as Carbon Dioxide (CO2) emissions intensity, CO2 emissions by fossil fuel consumption, fossil fuel intensity, energy intensity and economic structure, between industry and energy sectors in Portugal, and (ii) the influence that the consumption of fossil fuels, the consumption of aggregate energy and GDP have on CO2 emissions, and the influence that the ratios in which CO2 emissions intensity decomposes can affect that variable, using an econometric approach, namely Panel corrected standard errors estimator. We concluded that there is sigma convergence for all ratios with exception of fossil fuel intensity. Gamma convergence verifies for all ratios, with exception of CO2 emissions by fossil fuel. From the econometric approach we concluded that the considered variables have a significant importance in explaining CO2 emissions and CO2 emissions intensity.

Victor Moutinho; Margarita Robaina-Alves; Jorge Mota

2014-01-01T23:59:59.000Z

143

A Comparison of Iron and Steel Production Energy Intensity in China and the  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Comparison of Iron and Steel Production Energy Intensity in China and the A Comparison of Iron and Steel Production Energy Intensity in China and the U.S Title A Comparison of Iron and Steel Production Energy Intensity in China and the U.S Publication Type Conference Proceedings Year of Publication 2011 Authors Price, Lynn K., Ali Hasanbeigi, Nathaniel T. Aden, Zhang Chunxia, Li Xiuping, and Shangguan Fangqin Conference Name ACEEE Industrial Summer Study Date Published 07/2011 Publisher American Council for an Energy-Efficient Economy Conference Location New York Keywords china, energy intensity, iron and steel, Low Emission & Efficient Industry, united states Abstract The goal of this study was to develop a methodology for making an accurate comparison of the energy intensity of steel production in China and the U.S. The methodology addresses issues related to boundary definitions, conversion factors, and industry structure. In addition to the base case analysis, six scenarios were developed to assess the effect of different factors such as the share of electric arc furnace (EAF) steel production, conversion factors for the embodied energy of imported and exported intermediary and auxiliary products, and the differences in net calorific values of the fuels. The results of the analysis show that for the whole iron and steel production process, the final energy intensity in 2006 was equal to 14.90 GJ/tonne crude steel in the U.S. and 23.11 GJ/tonne crude steel in China in the base scenario. In another scenario that assumed the Chinese share of electric arc furnace production in 2006 (i.e. 10.5%) in the U.S., the energy intensity of steel production in the U.S. increased by 54% to 22.96GJ/tonne crude steel. Thus, when comparing the energy intensity of the U.S and Chinese steel industry,the structure of the industry should be taken into account.

144

Project_Descriptions_ITP_ARRA_Awards.xls | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Publications Capturing Waste Gas: Saves Energy, Lower Costs - Case Study, 2013 Combined Heat and Power Market Potential for Opportunity Fuels, August 2004 Combined Heat and Power...

145

Property:Description of Beach | Open Energy Information  

Open Energy Info (EERE)

Beach Beach Jump to: navigation, search Property Name Description of Beach Property Type Text Pages using the property "Description of Beach" Showing 24 pages using this property. A Alden Wave Basin + Designed as needed using commercially available sand/sediment C Carderock Maneuvering & Seakeeping Basin + Wave absorbers are a discontinuous 12 degree slope type made up of seven permeable layers of rectangular precast concrete bar panels resting on an impermeable beach, they are located along the full length of the two sides of the basin opposite the wavemaker units. Carderock Tow Tank 2 + The wave absorber spans the full width of the basin at the end opposite the wavemaker dome, the absorbers are a discontinuous 12 degree slope type made up of 12 permeable layers of rectangular precast concrete bar panels resting on an impermeable concrete slab supported by a structural steel framework, the center section of the absorber is of wood construction & can be raised and lowered as a unit to provide model access to and from the fitting-out dry dock located at the end of the basin.

146

Energy End-Use Intensities in Commercial Buildings 1995 - Index...  

U.S. Energy Information Administration (EIA) Indexed Site

1995 End-Use Data 1995 End-Use Data Overview Tables National estimates of energy consumption by fuel (electricity and natural gas) and end use (heating, cooling, lighting, etc.)...

147

CBECS 1989 - Energy End-use Intensities in Commercial Buildings -- Detailed  

U.S. Energy Information Administration (EIA) Indexed Site

Publication > Detailed Tables Publication > Detailed Tables 1989 Energy End-Use Intensities Detailed Tables Energy End Uses Ranked by Energy Consumption, 1989 Energy End Uses Ranked by Energy Consumption, 1989 Source: Energy Information Administration, Office of Energy Markets and End Use, Forms EIA-871A through F of the 1989 Commercial Buildings Energy Consumption Survey. Table Organization The following 13 tables present detailed energy end-use consumption data from the 1989 CBECS. Summary tables for all major fuels (electricity, natural gas, fuel oil, and district heat) appear first, followed by separate tables for each of the four major fuels. Within each energy source’s group of tables, there is a table showing end-use consumption, a table showing end-use intensities (consumption per square foot), and a table (except for fuel oil and district heat) showing the end-use shares of total consumption.

148

The role of energy intensity improvement in the AR4 GHG stabilization scenarios  

Science Journals Connector (OSTI)

This study analyzes the role of energy intensity improvement in the short term (to the year 2020) and midterm (to the year 2050) in the context of long-term greenhouse gases (GHG) stabilization scenarios. The dat...

Tatsuya Hanaoka; Mikiko Kainuma; Yuzuru Matsuoka

2009-05-01T23:59:59.000Z

149

Cost Minimization in an Energy-Intensive Plant Using Mathematical Programming Approaches  

Science Journals Connector (OSTI)

Cost Minimization in an Energy-Intensive Plant Using Mathematical Programming Approaches ... This creates a potential opportunity to reduce average operating costs by changing the operating mode and production rates depending on the power costs. ...

M. G. Ierapetritou; D. Wu; J. Vin; P. Sweeney; M. Chigirinskiy

2002-09-24T23:59:59.000Z

150

Energy Policy 30 (2002) 151163 Aggregating physical intensity indicators: results of applying the  

E-Print Network [OSTI]

indicators measure the energy used per dollar of GDP produced by some sector, sub-sector, industry or productEnergy Policy 30 (2002) 151­163 Aggregating physical intensity indicators: results of applying School of Resource and Environmental Management, Energy Research Group, Simon Fraser University, Burnaby

151

Energy use and carbon dioxide emissions in energy-intensive industries in key developing countries  

SciTech Connect (OSTI)

The industrial sector is the most important end-use sector in developing countries in terms of energy use and was responsible for 50% of primary energy use and 53% of associated carbon dioxide emissions in 1995 (Price et al., 1999). The industrial sector is extremely diverse, encompassing the extraction of natural resources, conversion of these resources into raw materials, and manufacture of finished products. Five energy-intensive industrial subsectors account for the bulk of industrial energy use and related carbon dioxide emissions: iron and steel, chemicals, petroleum refining, pulp and paper, and cement. In this paper, we focus on the steel and cement sectors in Brazil, China, India, and Mexico.1 We review historical trends, noting that China became the world's largest producer of cement in 1985 and of steel in 1996. We discuss trends that influence energy consumption, such as the amount of additives in cement (illustrated through the clinker/cement ratio), the share of electric arc furnaces, and the level of adoption of continuous casting. To gauge the potential for improvement in production of steel and cement in these countries, we calculate a ''best practice'' intensity based on use of international best practice technology to produce the mix of products manufactured in each country in 1995. We show that Brazil has the lowest potential for improvement in both sectors. In contrast, there is significant potential for improvement in Mexico, India, and especially China, where adoption of best practice technologies could reduce energy use and carbon dioxide emissions from steel production by 50% and cement production by 37%. We conclude by comparing the identified potential for energy efficiency improvement and carbon dioxide emissions reduction in these key developing countries to that of the U.S. This comparison raises interesting questions related to efforts to improve energy efficiency in developing countries, such as: what is the appropriate role of industrialized countries in promoting the adoption of low carbon technologies, how do international steel and cement companies influence the situation, and how can such information be used in the context of Clean Development Mechanism in the Kyoto Protocol?

Price, Lynn; Worrell, Ernst; Phylipsen, Dian

1999-09-01T23:59:59.000Z

152

Refining intensity, energy consumption, and pulp quality in two-stage chip refining  

SciTech Connect (OSTI)

This paper reports on thermomechanical pulps produced in two pilot plant installations. Both installations were conventional two-stage systems in which the first stage was pressurized and the second was atmospheric. At a given specific energy, pulp quality was improved. Alternatively, for a given pulp quality, the energy consumption was reduced when refining in the first stage was carried out at a high refining intensity. High refining intensity was reached by operating the first stage either at a high rotational speed or low consistency. There were indications that these benefits could be enhanced if the second stage were operated at a low refining intensity.

Miles, K.B.; May, W.D.; Karnis, A. (Pulp and Paper Research Inst. of Canada, 570 St. John's Boulevard, Pointe Claire, Quebec H9R 3J9 (CA))

1991-03-01T23:59:59.000Z

153

Could energy intensive industries be powered by carbonfree electricity?  

E-Print Network [OSTI]

chemical services -- for example, coal, converted to coke, acts as a reducing agent in blast furnaces.) (a comes from coal, oil, and natural gas. What infrastructure would be required to deliver the same amount to Royal Society T E X Paper #12; 2 David J C MacKay FRS Primary energy consumption: 2740TWh/y Coal: 475TWh

MacKay, David J.C.

154

Solar?energy conversion at high solar intensities  

Science Journals Connector (OSTI)

The concentration of sunlight offers distinct advantages for solar–electrical generation either by thermal conversion or by photovoltaics. A large variety of concentration techniques are available with concentration ratios of 1–1000. Concentration is required for thermal conversion systems to attain the high temperatures needed for efficiencies in the desired range of about 25%–35%. The projected costs for some of the solar thermal systems (especially the central receiver and the fixed mirror) indicate that they could be economically competitive in the southwestern states. The southwest may be required for these high?concentration systems to overcome the main disadvantage of concentration which is the use of the direct component of sunlight only. Other concerns of high?intensity systems are in tracking requirements reflective surface accuracy and material lifetimes of both the reflecting and absorbing components. Selective surface absorbers will be required for systems with concentration ratios below a few hundred. The present high cost of solar?cell?generated electricity can be reduced considerably by using concentrators. Cells can be used with any of the concentrator designs and the major concern is keeping them at acceptable operating temperatures. Planar silicon cells vertical multijunction and gallium–aluminum–arsenide cells all look attractive for concentrating systems.

Charles E. Backus

1975-01-01T23:59:59.000Z

155

Energy Intensity Development of the German Iron and Steel Industry between 1991 and 2007 Marlene Arensa), 1)  

E-Print Network [OSTI]

1 Energy Intensity Development of the German Iron and Steel Industry between 1991 and 2007 Marlene industry, energy intensity 1) Corresponding Author. Tel: +49 721 6809 408, fax: +49 721 6809 272, marlene a decomposition method [25]. Kim and Worrell (2002) compared energy and CO2intensity in the steel sector among

Paris-Sud XI, Université de

156

Energy Intense Equipment Purchasing Behaviour: A Review of the Literature i How do consumers and firms purchase equipment  

E-Print Network [OSTI]

Energy Intense Equipment Purchasing Behaviour: A Review of the Literature i CIEEDAC How do, 2007 #12;Energy Intense Equipment Purchasing Behaviour: A Review of the Literature ii Executive Summary Energy intense equipment purchasing behaviour: A review of the literature. CIEEDAC has been charged

157

Complex-Energy Shell-Model Description of Alpha Decay  

SciTech Connect (OSTI)

In his pioneering work of alpha decay, Gamow assumed that the alpha particle formed inside the nucleus tunnels through the barrier of the alpha-daughter potential. The corresponding metastable state can be viewed as a complex-energy solution of the time-independent Schroedinger equation with the outgoing boundary condition. The formation of the alpha cluster, missing in the original Gamow formulation, can be described within the R-matrix theory in terms of the formation amplitude. In this work, the alpha decay process is described by computing the formation amplitude and barrier penetrability in a large complex-energy configuration space spanned by the complex-energy eigenstates of the finite Woods-Saxon (WS) potential. The proper normalization of the decay channel is essential as it strongly modifies the alpha-decay spectroscopic factor. The test calculations are carried out for the ^{212}Po alpha decay.

Id Betan, R. [Rosario Physics Institute, Rosario, Argentina] [Rosario Physics Institute, Rosario, Argentina; Nazarewicz, Witold [ORNL] [ORNL

2011-01-01T23:59:59.000Z

158

Description of the Columbia Basin Wind Energy Study (CBWES)  

SciTech Connect (OSTI)

The purpose of this Technical Report is to provide background information about the Columbia Basin Wind Energy Study (CBWES). This study, which was supported by the U.S. Department of Energy’s Wind and Water Power Program, was conducted from 16 November 2010 through 21 March 2012 at a field site in northeastern Oregon. The primary goal of the study was to provide profiles of wind speed and wind direction over the depth of the boundary layer in an operating wind farm located in an area of complex terrain. Measurements from propeller and vane anemometers mounted on a 62 m tall tower, Doppler Sodar, and Radar Wind Profiler were combined into a single data product to provide the best estimate of the winds above the site during the first part of CBWES. An additional goal of the study was to provide measurements of Turbulence Kinetic Energy (TKE) near the surface. To address this specific goal, sonic anemometers were mounted at two heights on the 62 m tower on 23 April 2011. Prior to the deployment of the sonic anemometers on the tall tower, a single sonic anemometer was deployed on a short tower 3.1 m tall that was located just to the south of the radar wind profiler. Data from the radar wind profiler, as well as the wind profile data product are available from the Atmospheric Radiation Measurements (ARM) Data Archive (http://www.arm.gov/data/campaigns). Data from the sonic anemometers are available from the authors.

Berg, Larry K.; Pekour, Mikhail S.; Nelson, Danny A.

2012-10-01T23:59:59.000Z

159

Collection Descriptions for the E-print Network -- Energy, science, and  

Office of Scientific and Technical Information (OSTI)

Collection Descriptions Collection Descriptions E-prints on Subject Web Sites Coverage: provided by each unique Web site crawled (over 2.5 million documents) Description: The E-prints on Subject Web Sites collections contain electronic scientific and technical information created by scientists and research engineers active in their respective fields. These collections are intended for use by other scientists, engineers, and students at advanced levels in basic and applied sciences. Subject categories are Biology and Medicine; Biotechnology; Chemistry; Computer Technologies and Information Sciences; Energy Storage, Conversion and Utilization; Engineering; Environmental Management and Restoration Technologies; Environmental Sciences and Ecology; Fission and Nuclear Technologies; Fossil Fuels;

160

Energy End-Use Intensities in Commercial Buildings1992 -- Overview/End-Use  

U.S. Energy Information Administration (EIA) Indexed Site

> Overview > Overview 1992 Energy End-Use Intensities Overview Energy Consumption by End Use, 1992 Figure on Energy Consumption By End Use, 1992 Source: Energy Information Administration, Office of Energy Markets and End Use, Forms EIA-871A through F of the 1992 Commercial Buildings Energy Consumption Survey. End-Use Estimation Methodology The end-use estimates had two main sources: (1) survey data collected by the Commercial Buildings Energy Consumption Survey (CBECS) and (2) building energy simulations provided by the Facility Energy Decision Screening (FEDS) system. The CBECS provided data on building characteristics and total energy consumption (i.e., for all end uses) for a national sample of commercial buildings. Using data collected by the CBECS, the FEDS engineering modules were used to produce estimates of energy consumption by end use. The FEDS engineering estimates were then statistically adjusted to match the CBECS total energy consumption.

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Experimental Observation of Electrons Accelerated in Vacuum to Relativistic Energies by a High-Intensity Laser  

Science Journals Connector (OSTI)

Free electrons have been accelerated in vacuum to MeV energies by a high-intensity subpicosecond laser pulse ( 1019 W/cm2, 300 fs). The experimental data are in good agreement with the relativistic motion of electrons in a spatially and temporally finite electromagnetic field, both in terms of maximum energy and scattering angle.

G. Malka; E. Lefebvre; J. L. Miquel

1997-04-28T23:59:59.000Z

162

Explaining Long-Run Changes in the Energy Intensity of the U.S. Economy  

E-Print Network [OSTI]

Recent events have revived interest in explaining the long-run changes in the energy intensity of the U.S. economy. We use a KLEM dataset for 35 industries over 39 years to decompose changes in the aggregate energy-GDP ...

Sue Wing, Ian.

163

Changes in Energy Intensity in the Manufacturing Sector 1985-1994  

U.S. Energy Information Administration (EIA) Indexed Site

1. Introduction Rankeda EI Numbers of Total Inputs of Energy SIC Codeb Intensity for 1985c Intensity for 1994c 29 18.11 25.85 26 17.82 17.71 33 19.57 16.27 32 14.75 14.69 28 11.09 12.14 All 5.34 5.77 24 5.24 5.05 22 4.07 3.82 20 2.41 2.72 30 2.81 2.22 34 1.91 1.98 25 1.37 1.16 39 1.14 1.16 38 0.92 1.10 36 1.11 0.90 35 1.14 0.86 27 0.62 0.74 23 0.47 0.38 c For this report, all energy-intensity ratios are presented in units of thousands of Btu per 1992 constant dollars. Source: Table 12 of this report. The focus of this data report is on energy consumption relative to constant dollar shipments of manufactured products -- commonly called energy intensities (EI) by energy analysts. This report presents two measures of energy consumption, Offsite-Produced Energy and Total Inputs of Energy,

164

Changes in Energy Intensity in the Manufacturing Sector 1985-1994  

U.S. Energy Information Administration (EIA) Indexed Site

1. Introduction Rankeda EI Numbers of Total Inputs of Energy SIC Codeb Intensity for 1985c Intensity for 1994c 29 18.11 25.85 26 17.82 17.71 33 19.57 16.27 32 14.75 14.69 28 11.09 12.14 All 5.34 5.77 24 5.24 5.05 22 4.07 3.82 20 2.41 2.72 30 2.81 2.22 34 1.91 1.98 25 1.37 1.16 39 1.14 1.16 38 0.92 1.10 36 1.11 0.90 35 1.14 0.86 27 0.62 0.74 23 0.47 0.38 c For this report, all energy-intensity ratios are presented in units of thousands of Btu per 1992 constant dollars. Source: Table 12 of this report. The focus of this data report is on energy consumption relative to constant dollar shipments of manufactured products -- commonly called energy intensities (EI) by energy analysts. This report presents two measures of energy consumption, Offsite-Produced Energy and Total Inputs of Energy,

165

Climate Policy Design for Energy-Intensive Industries - And The Rest of Us  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Climate Policy Design for Energy-Intensive Industries - And The Rest of Us Climate Policy Design for Energy-Intensive Industries - And The Rest of Us Speaker(s): Holmes Hummel Date: January 8, 2009 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Richard Diamond Driving the U.S. energy system toward climate stabilization requires integration of multiple policy instruments in a staged series of legislative and regulatory policy vehicles. Qualifying the limitations of a cap-and-trade approach, Dr. Hummel will present a framework for orienting and organizing a multi-faceted policy development process. After surveying key design recommendations for specific sectors, the presentation will drill deeper into the specific challenge of engaging energy-intensive industries subject to global competition. After briefly discussing some of

166

Sensory impact of skin contact on white wines characterized by descriptive analysis, time–intensity analysis and temporal dominance of sensations analysis  

Science Journals Connector (OSTI)

Abstract In white wine fermentation, extended skin contact of crushed grapes is frequently used to increase the varietal aromas of white Riesling and Gewürztraminer wines. At the same time, phenolic compounds are extracted which can yield significant increases in bitterness and/or astringency. Descriptive analysis (DA), time–intensity analysis (TI) and temporal dominance of sensation (TDS) analysis were used to evaluate the changes in flavor of Riesling and Gewürztraminer wines made with varying skin contact times. DA showed that Riesling wines differed only in bitterness and color. In contrast, Gewürztraminer wines varied significantly in bitterness, sweetness, sourness, and astringency as well as for several aroma notes and color. 2009 and 2010 Gewürztraminer wines increased in intensity of honey/caramel, floral, and lemon aromas as well as yellow color, whereas peach/apricot was only significant in 2009 and apple and green grass/green banana only in 2010. Regarding the temporal properties of orally perceived modalities, bitterness TI curves recorded from Gewürztraminer differed significantly in maximum intensity and area under the curve, while Riesling showed no significant differences in any TI parameter. Increasing skin contact altered the dominance of orally perceived attributes. Fermenting the grapes completely on their skins produced a wine, which was significantly more bitter than all other wines according to TI and DA. However TDS analysis showed that the dominating sensation in this wine was not the bitter taste but the astringent mouth feel. TDS revealed further subtle differences caused by botrytized grape material, altering sourness and astringent perception.

Martina Sokolowsky; Annett Rosenberger; Ulrich Fischer

2015-01-01T23:59:59.000Z

167

Energy intensities, \\{EROIs\\} (energy returned on invested), and energy payback times of electricity generating power plants  

Science Journals Connector (OSTI)

The energy returned on invested, EROI, has been evaluated for typical power plants representing wind energy, photovoltaics, solar thermal, hydro, natural gas, biogas, coal and nuclear power. The strict exergy concept with no “primary energy weighting”, updated material databases, and updated technical procedures make it possible to directly compare the overall efficiency of those power plants on a uniform mathematical and physical basis. Pump storage systems, needed for solar and wind energy, have been included in the EROI so that the efficiency can be compared with an “unbuffered” scenario. The results show that nuclear, hydro, coal, and natural gas power systems (in this order) are one order of magnitude more effective than photovoltaics and wind power.

D. Weißbach; G. Ruprecht; A. Huke; K. Czerski; S. Gottlieb; A. Hussein

2013-01-01T23:59:59.000Z

168

Portfolio Manager Technical Reference: U.S. National Energy Use Intensity |  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

U.S. National Energy Use U.S. National Energy Use Intensity Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder

169

National Level Co-Control Study of the Targets for Energy Intensity and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

National Level Co-Control Study of the Targets for Energy Intensity and National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China Title National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China Publication Type Report LBNL Report Number LBNL-5253E Year of Publication 2011 Authors Zhou, Nan, Lynn K. Price, Nina Zheng, Jing Ke, and Ali Hasanbeigi Date Published 10/2011 Publisher Lawrence Berkerley National Laboratory ISBN Number LBNL-5253E Keywords china, china energy, co-control, energy intensity, industrial energy efficiency, iron and steel industry, Low Emission & Efficient Industry, policy studies, sulfur dioxide Abstract Since 2006, China has set goals of reducing energy intensity, emissions, and pollutants in multiple guidelines and in the Five Year Plans. Various strategies and measures have then been taken to improve the energy efficiency in all sectors and to reduce pollutants. Since controlling energy, CO2 emissions, and pollutants falls under the jurisdiction of different government agencies in China, many strategies are being implemented to fulfill only one of these objectives.Co-controls or integrated measures could simultaneously reduce greenhouse gas (GHG)emissions and criteria air pollutant emissions. The targets could be met in a more cost effective manner if the integrated measures can be identified and prioritized. This report provides analysis and insights regarding how these targets could be met via co-control measures focusing on both CO2 and SO2 emissions in the cement, iron & steel, and power sectors to 2030 in China. An integrated national energy and emission model was developed in order to establish a baseline scenario that was used to assess the impact of actions already taken by the Chinese government as well as planned and expected actions. In addition, CO2 mitigation scenarios and SO2 control scenarios were also established to evaluate the impact of each of the measures and the combined effects.

170

A High Intensity Linear e+ e- Collider Facility at Low Energy  

E-Print Network [OSTI]

I discuss a proposal for a high intensity $e^+e^-$ linear collider operated at low center of mass energies $\\sqrt{s}intensity beams. Such a facility would provide high statistics samples of (charmed) vector mesons and would permit searches for LFV with unprecedented precision in decays of $\\tau$ leptons and mesons. Implications on the design of the linear accelerator are discussed together with requirements to achieve luminosities of $10^{35}$ cm$^{-2}$s$^{-1}$ or more.

A. Schoning

2006-10-23T23:59:59.000Z

171

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

SciTech Connect (OSTI)

Production of iron and steel is an energy-intensive manufacturing process. In 2006, the iron and steel industry accounted for 13.6% and 1.4% of primary energy consumption in China and the U.S., respectively (U.S. DOE/EIA, 2010a; Zhang et al., 2010). The energy efficiency of steel production has a direct impact on overall energy consumption and related carbon dioxide (CO2) emissions. The goal of this study is to develop a methodology for making an accurate comparison of the energy intensity (energy use per unit of steel produced) of steel production. The methodology is applied to the steel industry in China and the U.S. The methodology addresses issues related to boundary definitions, conversion factors, and indicators in order to develop a common framework for comparing steel industry energy use. This study uses a bottom-up, physical-based method to compare the energy intensity of China and U.S. crude steel production in 2006. This year was chosen in order to maximize the availability of comparable steel-sector data. However, data published in China and the U.S. are not always consistent in terms of analytical scope, conversion factors, and information on adoption of energy-saving technologies. This study is primarily based on published annual data from the China Iron & Steel Association and National Bureau of Statistics in China and the Energy Information Agency in the U.S. This report found that the energy intensity of steel production is lower in the United States than China primarily due to structural differences in the steel industry in these two countries. In order to understand the differences in energy intensity of steel production in both countries, this report identified key determinants of sector energy use in both countries. Five determinants analyzed in this report include: share of electric arc furnaces in total steel production, sector penetration of energy-efficiency technologies, scale of production equipment, fuel shares in the iron and steel industry, and final steel product mix in both countries. The share of lower energy intensity electric arc furnace production in each country was a key determinant of total steel sector energy efficiency. Overall steel sector structure, in terms of average plant vintage and production capacity, is also an important variable though data were not available to quantify this in a scenario. The methodology developed in this report, along with the accompanying quantitative and qualitative analyses, provides a foundation for comparative international assessment of steel sector energy intensity.

Hasanbeigi, Ali; Price, Lynn; Aden, Nathaniel; Chunxia, Zhang; Xiuping, Li; Fangqin, Shangguan

2011-06-15T23:59:59.000Z

172

Towards a Microscopic Reaction Description Based on Energy Density Functionals  

SciTech Connect (OSTI)

A microscopic calculation of reaction cross sections for nucleon-nucleus scattering has been performed by explicitly coupling the elastic channel to all particle-hole excitations in the target and one-nucleon pickup channels. The particle-hole states may be regarded as doorway states through which the flux flows to more complicated configurations, and subsequently to long-lived compound nucleus resonances. Target excitations for {sup 40,48}Ca, {sup 58}Ni, {sup 90}Zr and {sup 144}Sm were described in a random-phase framework using a Skyrme functional. Reaction cross sections obtained agree very well with experimental data and predictions of a state-of-the-art fitted optical potential. Couplings between inelastic states were found to be negligible, while the pickup channels contribute significantly. The effect of resonances from higher-order channels was assessed. Elastic angular distributions were also calculated within the same method, achieving good agreement with experimental data. For the first time observed absorptions are completely accounted for by explicit channel coupling, for incident energies between 10 and 70 MeV, with consistent angular distribution results.

Nobre, G A; DIetrich, F S; Escher, J E; Thompson, I J; Dupuis, M; Terasaki, J; Engel, J

2011-09-26T23:59:59.000Z

173

In-situ determination of energy species yields of intense particle beams  

DOE Patents [OSTI]

An arrangement is provided for the in-situ determination of energy species yields of intense particle beams. The beam is directed onto a target surface of known composition, such that Rutherford backscattering of the beam occurs. The yield-energy characteristic response of the beam to backscattering from the target is analyzed using Rutherford backscattering techniques to determine the yields of energy species components of the beam.

Kugel, Henry W. (Somerset, NJ); Kaita, Robert (Englishtown, NJ)

1987-01-01T23:59:59.000Z

174

Energy intensities and CO2 emissions in Catalonia: a SAM analysis  

Science Journals Connector (OSTI)

In this paper, we estimate sectoral energy intensities and CO2 emissions for the Catalonian economy. In order to evaluate energy intensities, we use the SAM (Social Accounting Matrix) multiplier analysis applied to a SAM of the economy. CO2 emissions are estimated by means of the Leontief input-output submodel of the SAM, together with a table of coefficients of emissions per unit of monetary expenditures. This new methodology allows us to dispense with energy input-output tables for the base period. Our results are of the same order of magnitude as others obtained by physical measurement methods. We also simulate how changes in demand and energy energy efficiency parameters may affect CO2 emissions for the economy.

Antonio Manresa; Ferran Sancho

2004-01-01T23:59:59.000Z

175

Mathematical description for the measurement and verification of energy efficiency improvement  

Science Journals Connector (OSTI)

Abstract Insufficient energy supply is a problem faced by many countries, and energy efficiency improvement is identified as the quickest and most effective solution to this problem. Many energy efficiency projects are therefore initiated to reach various energy saving targets. These energy saving targets need to be measured and verified, and in many countries such a measurement and verification (M&V) activity is guided by the International Performance Measurement and Verification Protocol (IPMVP). However, M&V is widely regarded as an inaccurate science: an engineering practice relying heavily on professional judgement. This paper presents a mathematical description of the energy efficiency M&V problem and thus casts into a scientific framework the basic M&V concepts, propositions, techniques and methodologies. For this purpose, a general description of energy system modeling is provided to facilitate the discussion, strict mathematical definitions for baseline and baseline adjustment are given, and the M&V plan development is formulated as an M&V modeling problem. An optimal M&V plan is therefore obtained through solving a calculus of variation, or equivalently, an optimal control problem. This approach provides a fruitful source of research problems by which optimal M&V plans under various practical constraints can be determined. With the aid of linear control system models, this mathematical description also provides sufficient conditions for M&V practitioners to determine which one of the four M&V options in IPMVP should be used in a practical M&V project.

Xiaohua Xia; Jiangfeng Zhang

2013-01-01T23:59:59.000Z

176

The relationship between maximum tolerated light intensity and photoprotective energy dissipation in the photosynthetic antenna: chloroplast gains and losses  

Science Journals Connector (OSTI)

...tolerated light intensity and photoprotective energy dissipation in the photosynthetic antenna...photoinhibition by non-photochemical energy dissipation (NPQ) has been recently...membrane. protective non-photochemical energy dissipation|thylakoid membrane|photosystem...

2014-01-01T23:59:59.000Z

177

Universality of electron distributions in high-energy air showers - description of Cherenkov light production  

E-Print Network [OSTI]

The shower simulation code CORSIKA has been used to investigate the electron energy and angular distributions in high-energy showers. Based on the universality of both distributions, we develop an analytical description of Cherenkov light emission in extensive air showers, which provides the total number and angular distribution of photons. The parameterisation can be used e.g. to calculate the contribution of direct and scattered Cherenkov light to shower profiles measured with the air fluorescence technique.

F. Nerling; J. Blümer; R. Engel; M. Risse

2005-12-22T23:59:59.000Z

178

Department of Energy Commercial Building Benchmarks (New Construction): Energy Use Intensities, May 5, 2009  

Broader source: Energy.gov (indexed) [DOE]

Benchmarks Benchmarks New Construction Energy Use Intensities (EUIs) [kBtu/ft 2 /yr] May 5, 2009 Miami Houston Phoenix Atlanta Los Angeles Las Vegas San Francisco Baltimore Albuquerque Seattle Chicago Denver Minneapolis Helena Duluth Fairbanks 2003 CBECS Avg. Climate Zone 1A 2A 2B 3A 3B 3B 3C 4A 4B 4C 5A 5B 6A 6B 7 8 Large Office 39 42 40 39 32 40 34 43 39 37 43 38 47 44 49 62 99 Medium Office 38 44 42 44 35 41 40 51 43 46 53 47 59 54 62 82 94 Small Office 46 48 49 46 36 44 38 53 47 47 61 52 70 62 77 110 80 Warehouse 15 15 15 16 14 16 14 18 17 16 21 20 26 23 27 43 48 Stand-alone Retail 48 46 46 41 34 41 35 45 42 40 48 45 54 51 61 88 70 Strip Mall 46 44 44 44 35 43 38 48 45 42 51 47 60 55 66 99 110 Primary School 65 71 69 69 57 65 71 78 68 65 85 74 99 88 107 147 68 Secondary School 69 74 74 73 50 68 67 87 72 72 99 81 117 101 128 181 80 Supermarket 161 171 161 175 155 162 171 191 174 186 206 188 224 209 240

179

Smart Grid as a Driver for Energy-Intensive Industries: A Data Center Case  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Smart Grid as a Driver for Energy-Intensive Industries: A Data Center Case Smart Grid as a Driver for Energy-Intensive Industries: A Data Center Case Study Title Smart Grid as a Driver for Energy-Intensive Industries: A Data Center Case Study Publication Type Conference Paper LBNL Report Number LBNL-6104E Year of Publication 2012 Authors Ganti, Venkata, and Girish Ghatikar Conference Name Grid-Interop 2012 Date Published 12/2012 Conference Location Irving, TX Keywords data centers, market sectors, technologies Abstract The Smart Grid facilitates integration of supply- and demand-side services, allowing the end-use loads to be dynamic and respond to changes in electricity generation or meet localized grid needs. Expanding from previous work, this paper summarizes the results from field tests conducted to identify demand response opportunities in energy-intensive industrial facilities such as data centers. There is a significant opportunity for energy and peak-demand reduction in data centers as hardware and software technologies, sensing, and control methods can be closely integrated with the electric grid by means of demand response. The paper provides field test results by examining distributed and networked data center characteristics, end-use loads and control systems, and recommends opportunities and challenges for grid integration. The focus is on distributed data centers and how loads can be "migrated" geographically in response to changing grid supply (increase/decrease). In addition, it examines the enabling technologies and demand-response strategies of high performance computing data centers. The findings showed that the studied data centers provided average load shed of up to 10% with short response times and no operational impact. For commercial program participation, the load-shed strategies must be tightly integrated with data center automation tools to make them less resource-intensive.

180

A multivariate analysis of the energy intensity of sprawl versus compact living in the U.S. for 2003  

E-Print Network [OSTI]

Household energy consumption Sprawl Compact living Energy impact We explore the energy intensity of sprawl versus compact living by analyzing the total energy requirements of U.S. households for the year 2003. The methods used are based on previous studies on energy cost of living. Total energy requirement

Vermont, University of

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Laser-Energy Transfer and Enhancement of Plasma Waves and Electron Beams by Interfering High-Intensity Laser Pulses  

E-Print Network [OSTI]

Laser-Energy Transfer and Enhancement of Plasma Waves and Electron Beams by Interfering High-Intensity) The effects of interference due to crossed laser beams were studied experimentally in the high- intensity regime. Two ultrashort (400 fs), high-intensity (4 1017 and 1:6 1018 W=cm2) and 1 m wavelength laser

Umstadter, Donald

182

Energy-Efficiency Technologies and Benchmarking the Energy Intensity for the Textile Industry  

E-Print Network [OSTI]

Energy-Efficiency Technologies and Benchmarking the EnergyEnvironmental Energy Technologies Division Lawrence BerkeleyIsfahan University of Technology Mohamad Abdolrazaghi,

Hasanbeigi, Ali

2014-01-01T23:59:59.000Z

183

Energy use and energy intensity of the U.S. chemical industry  

E-Print Network [OSTI]

costs, fixed costs and ethylene price Purchased energy costsfeedstock and energy prices, ethylene yield (per unit ofof ethylene produced) and the generally higher energy prices

Worrell, Ernst; Phylipsen, Dian; Einstein, Dan; Martin, Nathan

2000-01-01T23:59:59.000Z

184

Acoustic energy dissipation and thermalization in carbon nanotubes: Atomistic modeling and mesoscopic description  

Science Journals Connector (OSTI)

The exchange of energy between low-frequency mechanical oscillations and high-frequency vibrational modes in carbon nanotubes (CNTs) is a process that plays an important role in a range of dynamic phenomena involving the dissipation of mechanical energy in both individual CNTs and CNT-based materials. The rates and channels through which acoustic energy deposited instantaneously in individual CNTs is dissipated are investigated in a series of atomistic molecular dynamics simulations. Several distinct regimes of energy dissipation, dependent on the initial stretching or bending deformations, are established. The onset of axial or bending buckling marks the transition from a regime of slow thermalization to a regime in which the energy associated with longitudinal and bending oscillations is rapidly damped. In the case of stretching vibrations, an intermediate regime is revealed in which dynamic coupling between longitudinal vibrational modes and the radial “squash” mode causes delayed axial buckling followed by a rapid transfer of energy to high-frequency vibrations. The results of the atomistic simulations are used in the design and parameterization of a “heat bath” description of thermal energy in a mesoscopic model, which is capable of simulating systems consisting of thousands of interacting CNTs. Two complementary methods for the description of mechanical energy dissipation in the mesoscopic model are developed. The relatively slow dissipation of acoustic vibrations in the absence of buckling is described by adding a damping force to the equations of motion of the dynamic elements of the mesoscopic model. The sharp increase in the energy dissipation rate at the onset of buckling is reproduced by incorporating a hysteresis loop into the strain energy that accounts for localized thermalization in the vicinity of buckling kinks. The ability of the mesoscopic model to reproduce the complex multistep processes of acoustic energy dissipation predicted by the atomistic simulations is demonstrated in mesoscopic simulations of free stretching and bending vibrations of individual CNTs.

William M. Jacobs; David A. Nicholson; Hagit Zemer; Alexey N. Volkov; Leonid V. Zhigilei

2012-10-09T23:59:59.000Z

185

A Comprehensive System of Energy Intensity Indicators for the U.S.: Methods, Data and Key Trends  

SciTech Connect (OSTI)

This report describes a comprehensive system of energy intensity indicators for the United States that has been developed for the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) over the past decade. This system of indicators is hierarchical in nature, beginning with detailed indexes of energy intensity for various sectors of the economy, which are ultimately aggregated to an overall energy intensity index for the economy as a whole. The aggregation of energy intensity indexes to higher levels in the hierarchy is performed with a version of the Log Mean Divisia Index (LMDI) method. Based upon the data and methods in the system of indicators, the economy-wide energy intensity index shows a decline of about 14% in 2010 relative to a 1985 base year. Discussion of energy intensity indicators for each of the broad end-use sectors of the economy—residential, commercial, industrial, and transportation—is presented in the report. An analysis of recent changes in the efficiency of electricity generation in the U.S. is also included. A detailed appendix describes the data sources and methodology behind the energy intensity indicators for each sector.

Belzer, David B.

2014-08-31T23:59:59.000Z

186

Analyzing intramolecular vibrational energy redistribution via the overlap intensity-level velocity correlator  

E-Print Network [OSTI]

Numerous experimental and theoretical studies have established that intramolecular vibrational energy redistribution (IVR) in isolated molecules has a heirarchical tier structure. The tier structure implies strong correlations between the energy level motions of a quantum system and its intensity-weighted spectrum. A measure, which explicitly accounts for this correaltion, was first introduced by one of us as a sensitive probe of phase space localization. It correlates eigenlevel velocities with the overlap intensities between the eigenstates and some localized state of interest. A semiclassical theory for the correlation is developed for systems that are classically integrable and complements earlier work focusing exclusively on the chaotic case. Application to a model two dimensional effective spectroscopic Hamiltonian shows that the correlation measure can provide information about the terms in the molecular Hamiltonian which play an important role in an energy range of interest and the character of the dynamics. Moreover, the correlation function is capable of highlighting relevant phase space structures including the local resonance features associated with a specific bright state. In addition to being ideally suited for multidimensional systems with a large density of states, the measure can also be used to gain insights into the phase space transport and localization. It is argued that the overlap intensity-level velocity correlation function provides a novel way of studying vibrational energy redistribution in isolated molecules. The correlation function is ideally suited to analyzing the parametric spectra of molecules in external fields.

Srihari Keshavamurthy; Nicholas R. Cerruti; Steven Tomsovic

2002-02-02T23:59:59.000Z

187

Description of High-Energy pp Collisions Using Tsallis Thermodynamics: Transverse Momentum and Rapidity Distributions  

E-Print Network [OSTI]

A systematic analysis of transverse momentum and rapidity distributions measured in high-energy proton - proton (pp) collisions for energies ranging from 53 GeV to 7 TeV using Tsallis thermodynamics is presented. The excellent description of all transverse momentum spectra obtained in earlier analyses is confirmed and extended. All energies can be described by a single Tsallis temperature of 68 +/- 5 MeV at all beam energies and particle types investigated (43 in total). The value of the entropic index, q, shows a wider spread but is always close to q approx 1.146. These values are then used to describe the rapidity distributions using a superposition of two Tsallis fireballs along the rapidity axis. It is concluded that the hadronic system created in high-energy p - p collisions between 53 GeV and 7 TeV can be seen as obeying Tsallis thermodynamics.

Marques, L; Deppman, A

2015-01-01T23:59:59.000Z

188

Comparison Study of Energy Intensity in the Textile Industry: A Case Study in Five Textile Sub-sectors  

E-Print Network [OSTI]

This paper contributes to the understanding of energy use in the textile industry by comparing the energy intensity of textile plants in five major sub-sectors, i.e. spinning, weaving, wet-processing, worsted fabric manufacturing, and carpet...

Hasanbeigi, A.; Hasanabadi, A.; Abdorrazaghi, M.

2011-01-01T23:59:59.000Z

189

Exploring the Effect of Inter-Stop Transport Distances on Traction Energy Cost Intensities of Freight Trains  

Science Journals Connector (OSTI)

With a computer-aided simulation approach, this research analyzes the change of the traction energy cost intensity of a typically formed Chinese freight ... than 20.00 km to decrease the traction energy cost per ...

Xuesong Feng; Haidong Liu; Keqi Wu

2013-01-01T23:59:59.000Z

190

2011 Intensity -1 INTENSITY OF SOUND  

E-Print Network [OSTI]

the rate at which energy is passing a certain point. This concept involves sound intensity. Consider the sound intensity. Recall the time rate of energy transfer is called "power". Thus, sound intensity2011 Intensity - 1 INTENSITY OF SOUND The objectives of this experiment are: · To understand

Glashausser, Charles

191

Baryon Acoustic Oscillation Intensity Mapping as a Test of Dark Energy  

E-Print Network [OSTI]

The expansion of the universe appears to be accelerating, and the mysterious anti-gravity agent of this acceleration has been called ``dark energy''. To measure the dynamics of dark energy, Baryon Acoustic Oscillations (BAO) can be used. Previous discussions of the BAO dark energy test have focused on direct measurements of redshifts of as many as $10^9$ individual galaxies, by observing the 21cm line or by detecting optical emission. Here we show how the study of acoustic oscillation in the 21 cm brightness can be accomplished by economical three dimensional intensity mapping. If our estimates gain acceptance they may be the starting point for a new class of dark energy experiments dedicated to large angular scale mapping of the radio sky, shedding light on dark energy.

Tzu-Ching Chang; Ue-Li Pen; Jeffrey B. Peterson; Patrick McDonald

2008-01-27T23:59:59.000Z

192

The relationship between energy intensity and income levels: Forecasting long term energy demand in Asian emerging countries  

SciTech Connect (OSTI)

This paper analyzes long-term trends in energy intensity for ten Asian emerging countries to test for a non-monotonic relationship between energy intensity and income in the author's sample. Energy demand functions are estimated during 1973--1990 using a quadratic function of log income. The long-run coefficient on squared income is found to be negative and significant, indicating a change in trend of energy intensity. The estimates are then used to evaluate a medium-term forecast of energy demand in the Asian countries, using both a log-linear and a quadratic model. It is found that in medium to high income countries the quadratic model performs better than the log-linear, with an average error of 9% against 43% in 1995. For the region as a whole, the quadratic model appears more adequate with a forecast error of 16% against 28% in 1995. These results are consistent with a process of dematerialization, which occurs as a result of a reduction of resource use per unit of GDP once an economy passes some threshold level of GDP per capita.

Galli, R. (Birkbeck Coll., London (United Kingdom) Univ. della Svizzera Italiana, Lugano (Switzerland). Facolta di Scienze Economiche)

1998-01-01T23:59:59.000Z

193

Energy Use Intensity and its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Building: Preprint  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Use Intensity and its Use Intensity and its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Building Preprint Rob Guglielmetti, Jennifer Scheib, Shanti D. Pless, and Paul Torcellini National Renewable Energy Laboratory Rachel Petro RNL Design Presented at the ASHRAE Winter Conference Las Vegas, Nevada January 29 - February 2, 2011 Conference Paper NREL/CP-5500-49103 March 2011 NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy, LLC (Alliance), a contractor of the US Government under Contract No. DE-AC36-08GO28308. Accordingly, the US Government and Alliance retain a nonexclusive royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US Government purposes.

194

GAMUT: A computer code for. gamma. -ray energy and intensity analysis  

SciTech Connect (OSTI)

GAMUT is a computer code to analyze {gamma}-ray energies and intensities. It does a linear least-squares fit of measured {gamma}-ray energies from one or more experiments to the level scheme. GAMUT also performs a non-linear least-squares analysis of branching intensities. For both energy and intensity data, a statistical Chi-square analysis is performed with an iterative uncertainty adjustment. The uncertainties of outlying measured values and sets of measurements with x{sup 2}/f>1 are increased, and the calculation is repeated until the uncertainties are consistent with the fitted values. GAMUT accepts input from standard or special-format ENSDF data sets. The special-format ENSDF data sets were designed to permit analysis of more than one set of measurements associated with a single ENSDF data set. GAMUT prepares a standard ENSDF format output data set containing the adjusted values. If more than one input ENSDF data set is provided, GAMUT creates an ADOPTED LEVELS, GAMMAS data set containing the adjusted level and {gamma}-ray energies and branching intensities from each level normalized to 100 for the strongest {gamma}-ray. GAMUT also provides a summary of the results and an extensive log of the iterative analysis. GAMUT is interactive prompting the user for input and output file names and for default calculation options. This version of GAMUT has adjustable dimensions so that any maximum number of data sets, levels, and {gamma}-rays can be established at the time of implementation. 6 refs.

Firestone, R.B.

1991-05-01T23:59:59.000Z

195

Energy use and carbon dioxide emissions in energy-intensive industries in key developing countries  

E-Print Network [OSTI]

Egypt, and Iran. The methodologies described here were developed through collaboration with international energy efficiency

Price, Lynn; Worrell, Ernst; Phylipsen, Dian

1999-01-01T23:59:59.000Z

196

Differential directional intensities of low energy cosmic ray muons near sea level  

E-Print Network [OSTI]

DIFFERENTIAL DIRECTIOiNAL INTEiNSITIES OF LOW ENERGY COSMIC RAY MUONS liR SEA LEVEL A Thesis by DAVID RUDOLPH DURDA Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE May 1970 Physics DIFFERENTIAL DIRECTIONAL INTENSITIES OF LOW ENERGY COSMIC RAY MUONS NEAR SEA LEVEL A Thesis by DAVID RUDOLPH DURDA Approved as to style and content by: C airman o Committee Hea o Department Me er Mem er May 1970...

Durda, David Rudolph

2012-06-07T23:59:59.000Z

197

STEP Intern Job Description  

Broader source: Energy.gov [DOE]

STEP Intern Job Description, from the Tool Kit Framework: Small Town University Energy Program (STEP).

198

The causes of the high energy intensity of the Kazakh economy: A characterization of its energy system  

Science Journals Connector (OSTI)

Abstract The primary energy intensity of Kazakhstan is among the highest in the world. The aim of this paper is to explore, in a quantitative way, the reasons for this condition, and to highlight the opportunities for improvement. To do so, we have developed a detailed ‘bottom-up’ model of the Kazakh energy sector. With this model, we have calculated the potential energy savings on both the demand and supply sides, and for all the economy sectors. This potential is defined as the difference between the current energy consumption in each sector/activity and the energy consumption if best available technologies or energy efficiency standards prevailing in developed countries were adopted in Kazakhstan. We conclude that the main causes of the energy inefficiency in Kazakhstan are: the excessive energy demand of buildings (especially for space heating) in the household and service sector, the inefficiency of the industry sector, particularly in the iron and steel and non-ferrous metals subsectors, the obsolescence of the heating and power generation assets, and the inefficient management of associated gas (flaring and re-injection in oil wells). With current energy efficiency standards prevailing in developed countries, the primary energy consumption in Kazakhstan in 2010 would be reduced by 48.6%, from 75.4 to 38.7 Mtoe.

Antonio Gómez; César Dopazo; Norberto Fueyo

2014-01-01T23:59:59.000Z

199

Energy-Intensive Processes Portfolio: Addressing Key Energy Challenges Across U.S. Industry  

Broader source: Energy.gov [DOE]

Portfolio of projects focused on investments in high-impact, crosscutting opportunities that provide significant energy savings and carbon reductions across a broad industrial base

200

Description of induced nuclear fission with Skyrme energy functionals: Static potential energy surfaces and fission fragment properties  

Science Journals Connector (OSTI)

Eighty years after its experimental discovery, a description of induced nuclear fission based solely on the interactions between neutrons and protons and quantum many-body methods still poses formidable challenges. The goal of this paper is to contribute to the development of a predictive microscopic framework for the accurate calculation of static properties of fission fragments for hot fission and thermal or slow neutrons. To this end, we focus on the Pu239(n,f) reaction and employ nuclear density functional theory with Skyrme energy densities. Potential energy surfaces are computed at the Hartree-Fock-Bogoliubov approximation with up to five collective variables. We find that the triaxial degree of freedom plays an important role, both near the fission barrier and at scission. The impact of the parametrization of the Skyrme energy density and the role of pairing correlations on deformation properties from the ground state up to scission are also quantified. We introduce a general template for the quantitative description of fission fragment properties. It is based on the careful analysis of scission configurations, using both advanced topological methods and recently proposed quantum many-body techniques. We conclude that an accurate prediction of fission fragment properties at low incident neutron energies, although technologically demanding, should be within the reach of current nuclear density functional theory.

N. Schunck; D. Duke; H. Carr; A. Knoll

2014-11-06T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Coherent backscattering of intense light by cold atoms with degenerate energy levels: Diagrammatic treatment  

E-Print Network [OSTI]

We present a generalization of the diagrammatic pump-probe approach to coherent backscattering (CBS) of intense laser light for atoms with degenerate energy levels. We employ this approach for a characterization of the double scattering signal from optically pumped atoms with the transition $J_g\\rightarrow J_e=J_g+1$ in the helicity preserving polarization channel. We show that, in the saturation regime, the internal degeneracy becomes manifest for atoms with $J_g\\geq 1$, leading to a faster decrease of the CBS enhancement factor with increasing saturation parameter than in the non-degenerate case.

V. N. Shatokhin; R. Blattmann; T. Wellens; A. Buchleitner

2014-07-10T23:59:59.000Z

202

High-energy-density physics experiments with intense heavy ion beams  

Science Journals Connector (OSTI)

In this paper we discuss physical and technical issues of high-energy-density physics (HEDP) experiments with intense heavy ion beams that are being performed at the Gesellschaft für Schwerionenforschung (GSI), Darmstadt. Special attention is given to a comparison of some recent results on expansion dynamics of evaporating lead that have been obtained in heavy ion beam driven HIHEX (Heavy-Ion Heating and Expansion) experiments at GSI-Darmstadt and in high-explosive driven shock wave loading and release experiments at IPCP–Chernogolovka.

D. Varentsov; V. Ya. Ternovoi; M. Kulish; D. Fernengel; A. Fertman; A. Hug; J. Menzel; P. Ni; D.N. Nikolaev; N. Shilkin; V. Turtikov; S. Udrea; V.E. Fortov; A.A. Golubev; V.K. Gryaznov; D.H.H. Hoffmann; V. Kim; I.V. Lomonosov; V. Mintsev; B.Yu. Sharkov; A. Shutov; P. Spiller; N.A. Tahir; H. Wahl

2007-01-01T23:59:59.000Z

203

Neutron-scattering study of the magnon energies and intensities in iron  

Science Journals Connector (OSTI)

The magnetic inelastic neutron scattering at low temperatures has been measured from a large single crystal of Fe54(12 at.% Si) up to energy transfers of 100 meV using the constant-Q spectrometer at the Los Alamos pulsed neutron source. The spin-wave energies and intensities were obtained from the data by using a multichannel maximum-entropy technique, and we show that much more detailed information can be obtained from the maximum-entropy analysis. The observed spin-wave dispersion relations obtained in the present experiment are in excellent agreement with earlier data, and we observe a sharp falloff of the (001) magnon intensity at approximately 80 meV, which is in accord with previous experimental measurements and multiband theoretical calculations of the dynamic susceptibility of iron. We also compare the data rate obtained with the constant-Q spectrometer to a triple-axis instrument and find that the spectrometer is competitive for this type of measurement.

M. Yethiraj; R. A. Robinson; D. S. Sivia; J. W. Lynn; H. A. Mook

1991-02-01T23:59:59.000Z

204

Energy input, carbon intensity and cost for ethanol produced from farmed seaweed  

Science Journals Connector (OSTI)

Abstract Macroalgae, commonly known as seaweed, has received significant interest as a potential source of ethanol because of its fast growth, significant sugar content and successful lab-scale conversion to ethanol. Issues such as energy input in seaweed conversion, lifecycle emissions, global production potential and cost have received limited attention. To address this gap, a well-to-tank model of ethanol production from brown seaweed is developed and applied to the case of ethanol production from Saccharina latissima in British Columbia, Canada. Animal feed is proposed as a co-product and co-product credits are estimated. In the case considered, seaweed ethanol is found to have an energy return on invested (EROI) of 1.7 and a carbon intensity (CI) of 10.8 gCO2e MJ?1. Ethanol production from conventionally farmed seaweed could cost less than conventional ethanol and be produced on a scale comparable to 1% of global gasoline production. A drying system is required in regions such as British Columbia that require seasonal seaweed storage due to a limited harvest season. The results are significantly influenced by variations in animal feed processing energy, co-product credit value, seaweed composition, the value of seaweed animal feed and the cost of seaweed farming. We find EROI ranges from 0.64 to 26.7, CI from 33 to ?41 gCO2e MJ?1 and ethanol production is not financially viable without animal feed production in some scenarios.

Aaron Philippsen; Peter Wild; Andrew Rowe

2014-01-01T23:59:59.000Z

205

Intensity and energy modulated radiotherapy with proton beams: Variables affecting optimal prostate plan  

Science Journals Connector (OSTI)

Inverse planning for intensity- and energy-modulated radiotherapy (IEMRT) with proton beams involves the selection of (i) the relative importance factors to control the relative importance of the target and sensitive structures (ii) an appropriate energy resolution to achieve an acceptable depth modulation (iii) an appropriate beamlet width to modulate the beam laterally and (iv) a sufficient number of beams and their orientations. In this article we investigate the influence of these variables on the optimized dose distribution of a simulated prostate cancer IEMRT treatment. Good dose conformation for this prostate case was achieved using a constellation of I factors for the target rectum bladder and normal tissues of 500 50 15 and 1 respectively. It was found that for an active beam delivery system the energy resolution should be selected on the basis of the incident beams’ energy spread (? E ) and the appropriate energy resolution varied from 1 MeV at ? E =0.0? to ?5? MeV at ? E =2.0? MeV . For a passive beam delivery system the value of the appropriate depth resolution for inverse planning may not be critical as long as the value chosen is at least equal to one-half the FWHM of the primary beam Bragg peak. Results indicate that the dose grid element dimension should be equal to or no less than 70% of the beamlet width. For this prostate case we found that a maximum of three to four beam ports is required since there was no significant advantage to using a larger number of beams. However for a small number (?4) of beams the selection of beam orientations while having only a minor effect on target coverage strongly influenced the sensitive structure sparing and normal tissue integral dose.

Collins Yeboah; George A. Sandison; Alexei V. Chvetsov

2002-01-01T23:59:59.000Z

206

Impacts of Intensive Management and Landscape Structure on Timber and Energy Wood Production and net CO2 Emissions from Energy Wood Use of Norway Spruce  

Science Journals Connector (OSTI)

The aim of this study was to analyze the effects of intensive management and forest landscape structure (in terms of age class distribution) on timber and energy wood production (m3 ha?1), net present value (NPV,...

Johanna Routa; Seppo Kellomäki; Heli Peltola

2012-03-01T23:59:59.000Z

207

Project Description  

Broader source: Energy.gov (indexed) [DOE]

Project Description Project Description The Energy Policy Act of 2005 (EPAct 2005), the Energy Independence and Security Act of 2007 (EISA 2007), and Presidential Executive Order 13423 all contain requirements for Federal facilities to decrease energy consumption and increase the use of renewable energy by the year 2015. To provide leadership in meeting these requirements, DOE, in partnership with the General Services Administration (GSA), has installed a rooftop solar electric, or PV, system on the roof of DOE's headquarters in Washington, D.C. The 205 kilowatt (kW) installation is one of the largest of its kind in the Nation's capital. A display in the For- restal building will show the power output of the PV system during the day and the energy produced over

208

A review of existing commercial energy use intensity and load-shape studies  

SciTech Connect (OSTI)

This paper reviews and compares existing studies of energy use intensities (EUIs) and load shapes (LSs) in the commercial sector, focusing on studies that used California data. Our review of EUI studies found fairly good agreement on electric lighting and cooling EUIs. Other EUIs, notably electric miscellaneous in offices, retail, and food stores; electric refrigeration in restaurants and warehouses; electric cooking in restaurants; and electric water heating and ventilation for all types of premises exhibited the largest variations. The major variations in gas EUIs were found in restaurants (all end uses) and food stores (cooking and water heating). Our review of LS studies, which included existing LSs in use by Southern California Edison (SCE) Company, the California Energy Commission (CEC), and a Lawrence Berkeley Laboratory (LBL) study, uncovered two significant features of existing LS estimates. First, LSs were generally not consistent between studies (e.g., SCE and CEC had different load shapes for the same end use in the same type of premises), but these differences could often be related to differences in assumptions for operating hours. Second, for a given type of premise, LSs were often identical for each month and for peak and standard-days, suggesting that, according to some studies, these end uses were not affected by seasonal or climatic influences. 21 refs., 6 figs., 1 tab.

Akbari, H.; Turiel, I.; Eto, J.; Heinemeier, K.; Lebot, B.; Rainer, L.

1990-08-01T23:59:59.000Z

209

A new approach to estimate commercial sector end-use load shapes and energy use intensities  

SciTech Connect (OSTI)

We discuss the application of an end-use load shape estimation technique to develop annual energy use intensities (EUIs) and hourly end-use load shapes (LSs) for commercial buildings in the Pacific Gas and Electric Company (PG&E) service territory. Results will update inputs for the commercial sector energy and peak demand forecasting models used by PG&E and the California Energy Commission (CEC). EUIs were estimated for 11 building types, up to 10 end uses, 3 fuel types, 2 building vintages, and up to 5 climate regions. The integrated methodology consists of two major parts. The first part is the reconciliation of initial end-use load-shape estimates with measured whole-building load data to produce intermediate EUIs and load shapes, using LBL`s End-use Disaggregation Algorithm, EDA. EDA is a deterministic hourly algorithm that relies on the observed characteristics of the measured hourly whole-building electricity use and disaggregates it into major end-use components. The end-use EUIs developed through the EDA procedure represent a snap-shot of electricity use by building type and end-use for two regions of the PG&E service territory, for the year that disaggregation is performed. In the second part of the methodology, we adjust the EUIs for direct application to forecasting models based on factors such as climatic impacts on space-conditioning EUIs, fuel saturation effects, building and equipment vintage, and price impacts. Core data for the project are detailed on-site surveys for about 800 buildings, mail surveys ({approximately}6000), load research data for over 1000 accounts, and hourly weather data for five climate regions.

Akbari, H.; Eto, J.; Konopacki, S.; Afzal, A.; Heinemeier, K.; Rainer, L.

1994-08-01T23:59:59.000Z

210

Energy performances of intensive and extensive short rotation cropping systems for woody biomass production in the EU  

Science Journals Connector (OSTI)

Abstract One of the strategies to ensure energy security and to mitigate climate change in the European Union (EU) is the establishment and the use of short rotation woody crops (SRWCs) for the production of renewable energy. \\{SRWCs\\} are cultivated in the EU under different management systems. Addressing the energy security problems through \\{SRWCs\\} requires management systems that maximize the net energy yield per unit land area. We assembled and evaluated on-farm data from within the EU, (i) to understand the relationship between the SRWC yields and spatial distribution of precipitation, as well as the relationship between SRWC yield and the planting density, and (ii) to investigate whether extensively managed SRWC systems are more energy efficient than their intensively managed counterparts. We found that SRWC yield ranged from 1.3 to 24 t ha?1 y?1 (mean 9.3±4.2 t ha?1 y?1) across sites. We looked for, but did not find a relationship between yield and annual precipitation as well as between yield and planting density. The energy inputs of extensively managed SRWC systems ranged from 3 to 8 GJ ha?1 y?1 whereas the energy ratio (i.e. energy output to energy input ratio) varied from 9 to 29. Although energy inputs (3–16 GJ ha?1y?1) were larger in most cases than those of extensively managed SRWC systems, intensively managed SRWC systems in the EU had higher energy ratios, i.e. between 15 and 62. The low energy ratio of extensively managed SRWC systems reflected their lower biomass yield per unit area. Switching from intensively managed SRWC systems to extensively managed ones thus creates an energy gap, and will require more arable land to be brought into production to compensate for the yield loss. Consequently, extensification is not the most appropriate path to the success of the wide scale deployment of SRWC for bioenergy production in the EU.

S. Njakou Djomo; A. Ac; T. Zenone; T. De Groote; S. Bergante; G. Facciotto; H. Sixto; P. Ciria Ciria; J. Weger; R. Ceulemans

2015-01-01T23:59:59.000Z

211

Collisionless absorption, hot electron generation, and energy scaling in intense laser-target interaction  

E-Print Network [OSTI]

Among the various attempts to understand collisionless absorption of intense ultrashort laser pulses a variety of models has been invented to describe the laser beam target interaction. In terms of basic physics collisionless absorption is understood now as the interplay of the oscillating laser field with the space charge field produced in the plasma. A first approach to this idea is realized in Brunel's model the essence of which consists in the formation of an oscillating charge cloud in the vacuum in front of the target. The investigation of statistical ensembles of orbits shows that the absorption process is localized at the ion-vacuum interface and in the skin layer: Single electrons enter into resonance with the laser field thereby undergoing a phase shift which causes orbit crossing and braking of Brunel's laminar flow. This anharmonic resonance acts like an attractor for the electrons and leads to the formation of a Maxwellian tail in the electron energy spectrum. Most remarkable results of our inves...

Liseykina, T; Murakami, M

2014-01-01T23:59:59.000Z

212

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

of Iron and Steel Production Energy Use and Energy Intensityof Iron and Steel Production Energy Use and Energy Intensitycomparisons of steel production energy efficiency and CO 2

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

213

Analysis of two-dimensional high-energy photoelectron momentum distributions in the single ionization of atoms by intense laser pulses  

E-Print Network [OSTI]

, using longer pulses at lower intensities. The energy spectra above 4Up, where Up is the ponderomotive energy, have been found to vary rapidly with small changes in laser intensities 10,11 when laser pulseAnalysis of two-dimensional high-energy photoelectron momentum distributions in the single

Lin, Chii-Dong

214

Target Allocation Methodology for China's Provinces: Energy Intensity in the 12th FIve-Year Plan  

E-Print Network [OSTI]

energy in the total energy mix was determined in theOther energy in the total energy mix was much smaller thanwell as the different mix of energy and economic structure

Ohshita, Stephanie

2011-01-01T23:59:59.000Z

215

A Comparison of Iron and Steel Production Energy Intensity in China and the U.S  

E-Print Network [OSTI]

2: Final to Primary Energy Conversion Factor in 2006 Finalinternational average energy conversion factors are used forenergy structure. The energy conversion factors for external

Price, Lynn

2014-01-01T23:59:59.000Z

216

Self-focusing, channel formation, and high-energy ion generation in interaction of an intense short laser pulse with a He jet  

E-Print Network [OSTI]

Self-focusing, channel formation, and high-energy ion generation in interaction of an intense short of interaction of a relativistically intense 4-TW, 400-fs laser pulse with a He gas jet. We observe a stable data, we reconstructed the axial profile of laser channel and on-axis laser intensity. The estimated

Umstadter, Donald

217

An Empirical Analysis of Energy Intensity and Its Determinants at the State Level  

E-Print Network [OSTI]

that rising per capita income and higher energy prices have played an important part in lowering energy consumption to GDP ­ has long been of interest to energy researchers. Understanding the drivers of energy con. Efficiency refers to the reduced energy use per unit of economic activity within a particular sector (e

218

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

25 Table 18: Total Energy Consumption of China's Steelalmost doubled, but total energy consumption only increasedsources of total energy consumption data for China’s iron

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

219

Proc. 27th IEEE International Performance Computing and Communications Conference (IPCCC), Dec. 2008. Distributed Energy-Efficient Scheduling for Data-Intensive Applications with  

E-Print Network [OSTI]

. 2008. 1 Distributed Energy-Efficient Scheduling for Data-Intensive Applications with Deadline the performance of data-intensive applications on data grids, a large number of data replicas inevitably increase energy dissipation in storage resources on the data grids. In order to implement a data grid with high

Qin, Xiao

220

A New System of Energy Intensity Indicators for the U.S. Economy Focus on Manufacturing  

E-Print Network [OSTI]

The U.S. commitment to energy efficiency and conservation policy was emphasized in the National Energy Policy (NEP) made public in May 2001. Recommendation 14 in Chapter 4 of the NEP - "Making Energy Efficiency a National Priority" -recommended...

Roop, J. M.

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Could energy-intensive industries be powered by carbon-free electricity?  

Science Journals Connector (OSTI)

...possibility of converting industrial energy demand to electricity, and...decarbonization of the whole energy system using wind, biomass, solar power in deserts and...one-third of the world's energy consumption [1]; most of...

2013-01-01T23:59:59.000Z

222

Inertial fusion energy issues of intense heavy ion and laser beams interacting with ionized matter studied at GSI-Darmstadt  

Science Journals Connector (OSTI)

European activities on inertial fusion energy are coordinated by “keep in touch activities” of the European Fusion Programme coordinated by the European Commission. There is no general inertial fusion program in Europe. Instead, a number of activities relevant to inertial fusion are carried out by university groups and research centers. The Helmholtz-Research Center GSI-Darmstadt (Gesellschaft für Schwerionenforschung) operates accelerator facilities which provide the highest intensity for heavy ion beams and therefore key issues of ion beam driven fusion can be addressed. In addition to the accelerator facilities, one high-energy laser system is available (nhelix: nanosecond high-energy laser for ion experiments) and another one is under construction (PHELIX: petawatt high-energy laser for ion experiments). The heavy ion synchrotron facility, SIS18 (Schwer-Ionen-Synchrotron 18) recently delivered an intense uranium beam that deposits about 1 kJ/g specific energy in solid matter. Using this beam, experiments have been performed where solid Pb- and Ta-targets have been heated to the level of 1 eV. Experiments to study interaction mechanism of heavy ion beams with matter have been continued and are reported here.

D.H.H. Hoffmann; A. Blazevic; S. Korostiy; P. Ni; S.A. Pikuz; B. Rethfeld; O. Rosmej; M. Roth; N.A. Tahir; S. Udrea; D. Varentsov; K. Weyrich; B.Yu. Sharkov; Y. Maron

2007-01-01T23:59:59.000Z

223

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

16 4. Base Year Production, Trade and Energy UseYear Production, Trade and Energy Use Data 4.1. Production18. Total energy use is adjusted for net trade in auxiliary

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

224

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

13.6% and 1.4% of primary energy consumption in China and13.6% and 1.4% of primary energy consumption in China andan effect on the primary energy consumption level and hence

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

225

Analysis and Decomposition of the Energy Intensity of Industries in California  

E-Print Network [OSTI]

Renewable Energy (US DOE/EERE). 2010. States activities andmanufacturing sector (USDOE/EERE, 2010). Industry accounted

Can, Stephane de la Rue de

2014-01-01T23:59:59.000Z

226

Energy Production, Frictional Dissipation, and Maximum Intensity of a Numerically Simulated Tropical Cyclone  

Science Journals Connector (OSTI)

A tropical cyclone (TC) viewed as a heat engine converts heat energy extracted from the ocean into the kinetic energy of the TC, which is eventually dissipated due to surface friction. Since the energy production rate is a linear function while ...

Yuqing Wang; Jing Xu

2010-01-01T23:59:59.000Z

227

The Theoretical Description of Ionic States Observed by High Energy Photoelectron Spectroscopy  

Science Journals Connector (OSTI)

...Ionic States Observed by High Energy Photoelectron Spectroscopy...orbital basis of double zeta quality or better, very good agreement with experimental core binding energies is obtained. The origin of...satellite peaks observed in high-energy photoelectron spectra is discussed...

1973-01-01T23:59:59.000Z

228

Sensitivity to Dark Energy candidates by searching for four-wave mixing of high-intensity lasers in the vacuum  

E-Print Network [OSTI]

Theoretical challenges to understand Dark Matter and Dark Energy suggest the existence of low-mass and weakly coupling fields in the universe. The quasi-parallel photon-photon collision system (QPS) can provide chances to probe the resonant production of these light dark fields and the induced decay by the coherent nature of laser fields simultaneously. By focusing high-intensity lasers with different colors in the vacuum, new colors emerge as the signature of the interaction. Because four photons in the initial and final states interplay via the dark field exchange, this process is analogous to four-wave mixing in quantum optics, where the frequency sum and difference among the incident three waves generate the fourth wave with a new frequency via the nonlinear property of crystals. The interaction rate of the four-wave mixing process has the cubic dependence on the intensity of each wave. Therefore, if high-intensity laser fields are given, the sensitivity to the weakly coupling of dark fields to photons rapidly increases over the wide mass range below sub-eV. Based on the experimentally measurable photon energies and the linear polarization states, we formulate the relation between the accessible mass-coupling domains and the high-intensity laser parameters, where the effects of the finite spectrum width of pulse lasers are taken into account. The expected sensitivity suggests that we have a potential to explore interactions at the Super-Planckian coupling strength in the sub-eV mass range, if the cutting-edge laser technologies are properly combined.

Kensuke Homma

2012-11-12T23:59:59.000Z

229

Stochastic semi-classical description of fusion at near-barrier energies  

SciTech Connect (OSTI)

Fusion reactions of heavy ions are investigated by employing a simple stochastic semi-classical model, which includes coupling between the relative motion and low frequency collective surface modes of colliding ions similarly to the quantal coupled-channels description. The quantal effect enters into the calculation through the initial zero-point fluctuations of the surface vibrations. A good agreement with results of coupled-channels calculations as well as experimental data is obtained for fusion cross sections of Ni isotopes. The internal excitations in nonfusing events as well as the fusion time are investigated.

Ayik, Sakir [Physics Department, Tennessee Technological University, Cookville, Tennessee 38505 (United States); Yilmaz, Bulent [Physics Department, Ankara University, TR-06100 Ankara (Turkey); Grand Accelerateur National d'Ions Lourds (GANIL), CEA/DSM-CNRS/IN2P3, BP 55027, F-14076 Caen Cedex 5 (France); Lacroix, Denis [Grand Accelerateur National d'Ions Lourds (GANIL), CEA/DSM-CNRS/IN2P3, BP 55027, F-14076 Caen Cedex 5 (France)

2010-03-15T23:59:59.000Z

230

High-yield maize with large net energy yield and small global warming intensity  

Science Journals Connector (OSTI)

...from a previous life cycle assessment...pumping rather than diesel or natural gas, fine-tuning...actual baseline. General Discussion. Increasing...be natural gas, diesel, and electricity...energy per liter of diesel (43 MJ·L-1...Improvements in life-cycle energy efficiency...

Patricio Grassini; Kenneth G. Cassman

2012-01-01T23:59:59.000Z

231

Structured Descriptions  

E-Print Network [OSTI]

A descriptive formalism along with a philosophy for its use and expansion are presented wherein descriptions are of a highly structured nature. This descriptive system and the method of recognition are extended to the ...

Gabriel, Richard P.

232

Description of Induced Nuclear Fission with Skyrme Energy Functionals: II. Finite Temperature Effects  

E-Print Network [OSTI]

Understanding the mechanisms of induced nuclear fission for a broad range of neutron energies could help resolve fundamental science issues, such as the formation of elements in the universe, but could have also a large impact on societal applications in energy production or nuclear waste management. The goal of this paper is to set up the foundations of a microscopic theory to study the static aspects of induced fission as a function of the excitation energy of the incident neutron, from thermal to fast neutrons. To account for the high excitation energy of the compound nucleus, we employ a statistical approach based on finite-temperature nuclear density functional theory with Skyrme energy densities, which we benchmark on the 239 Pu(n,f) reaction. We compute the evolution of the least-energy fission pathway across multidimensional potential energy surfaces with up to five collective variables as a function of the nuclear temperature, and predict the evolution of both the inner and outer fission barriers as a function of the excitation energy of the compound nucleus. We show that the coupling to the continuum induced by the finite temperature is negligible in the range of neutron energies relevant for many applications of neutron-induced fission. We prove that the concept of quantum localization introduced recently can be extended to T > 0, and we apply the method to study the interaction energy and total kinetic energy of fission fragments as a function of the temperature for the most probable fission. While large uncertainties in theoretical modeling remain, we conclude that finite-temperature nuclear density functional may provide a useful framework to obtain accurate predictions of fission fragment properties.

N. Schunck; D. Duke; H. Carr

2015-01-23T23:59:59.000Z

233

Efficient laser acceleration of proton beams for intense sources of low energy neutrinos  

SciTech Connect (OSTI)

The existence of highly efficient ion acceleration regimes in collective laser-plasma interactions opens up the possibility to develop high-energy-physics (HEP) facilities in conjunction with projects for inertial confined nuclear fusion (ICF) and neutron spallation sources.

Pegoraro, F. [Department of Physics, University of Pisa, Pisa (Italy); CNISM, Pisa (Italy); Bulanov, S. V.; Esirkepov, T. Zh.; Tajima, T. [Advanced Photon Research Centre, JAEA, Kizu, Kyoto (Japan); Migliozzi, P. [INFN, Sez. di Napoli, Naples (Italy); Terranova, F. [INFN, Laboratori Nazionali di Frascati, Frascati (Italy)

2006-04-07T23:59:59.000Z

234

In-situ determination of energy species yields of intense particle beams  

DOE Patents [OSTI]

Objects of the present invention are provided for a particle beam having a full energy component at least as great as 25 keV, which is directed onto a beamstop target, such that Rutherford backscattering, preferably near-surface backscattering occurs. The geometry, material composition and impurity concentration of the beam stop are predetermined, using any suitable conventional technique. The energy-yield characteristic response of backscattered particles is measured over a range of angles using a fast ion electrostatic analyzer having a microchannel plate array at its focal plane. The knee of the resulting yield curve, on a plot of yield versus energy, is analyzed to determine the energy species components of various beam particles having the same mass.

Kugel, H.W.; Kaita, R.

1983-09-26T23:59:59.000Z

235

Integrated estimation of commercial sector end-use load shapes and energy use intensities  

SciTech Connect (OSTI)

The Southern California Edison Company (SCE) and the California Energy Commission (CEC) have contracted with Energy Analysis Program of the Applied Science Division at the Lawrence Berkeley Laboratory (LBL) to develop an integrated set of commercial sector load shapes (LS) and energy utilization indices (EUI) for use in forecasting electricity demand. The overall objectives of this project are to conduct detailed analyses of SCE data on commercial building characteristics, energy use, and whole-building load shapes, and, in conjunction with other data, to develop, test, and apply an integrated approach for the estimation of end-use LSs and EUIs. The project is one of the first attempts ever to combine simulation-based, prototypical building analyses with direct reconciliation to measured hourly load data.

Akbari, H.; Eto, J.; Turiel, I.; Heinemeier, K.; Lebot, B.; Nordman, B.; Rainer, L.

1989-01-01T23:59:59.000Z

236

A Comparison of Iron and Steel Production Energy Intensity in China and the U.S  

E-Print Network [OSTI]

industry includes all coke making, pelletizing, sintering,accounting for energy used for coke production within theinput used as a feedstock for coke making and also as a fuel

Price, Lynn

2014-01-01T23:59:59.000Z

237

Multiple metrics for quantifying the intensity of water consumption of energy production  

E-Print Network [OSTI]

Discussion of the environmental implications of worldwide energy demand is currently dominated by the effects of carbon dioxide (CO[subscript 2]) emissions on global climate. At the regional scale, however, water resource ...

Spang, E S

238

Long-Term Shifts in Life-Cycle Energy Efficiency and Carbon Intensity  

Science Journals Connector (OSTI)

System-level life-cycle efficiency may decrease as mitigation efforts intensify, since low-efficiency renewable systems with high output have much lower GHG emissions than some high-efficiency fossil fuel systems. ... Climate policies accelerate both improvements in EF and the adoption of renewable technologies, resulting in considerably lower primary energy demand and GHG emissions. ... Schipper, L.; Saenger, C.; Sudardshan, A.Transport and carbon emissions in the United States: The Long View Energies 2011, 4, 563– 581 ...

Sonia Yeh; Gouri Shankar Mishra; Geoff Morrison; Jacob Teter; Raul Quiceno; Kenneth Gillingham; Xavier Riera-Palou

2013-02-14T23:59:59.000Z

239

Resonant-Raman intensities and transition energies of the E11 transition in carbon nanotubes * J. Maultzsch,1 S. Reich,2 and C. Thomsen1  

E-Print Network [OSTI]

Resonant-Raman intensities and transition energies of the E11 transition in carbon nanotubes H- troscopy. Radial breathing mode spectra were collected varying the excitation energy in the near-infrared from 1.15 to 1.48 eV. From resonance profiles we obtained the E11 S energies of 11 nanotubes, extending

Nabben, Reinhard

240

Data Intensive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Intensive Data Intensive Computing Pilot Program In 2014 NERSC is conducting its second and last round of allocations to projects in data intensive science. This pilot aims to...

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Acoustic energy dissipation and thermalization in carbon nanotubes: Atomistic modeling and mesoscopic description  

E-Print Network [OSTI]

The exchange of energy between low-frequency mechanical oscillations and high-frequency vibrational modes in carbon nanotubes (CNTs) is a process that plays an important role in a range of dynamic phenomena involving the ...

Nicholson, David A.

242

National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China  

E-Print Network [OSTI]

committed to reduce its carbon intensity (CO 2 per unit ofcommitted to reduce its carbon intensity (CO 2 per unit of2 emissions, and the 40-45% carbon intensity reduction goals

Zhou, Nan

2013-01-01T23:59:59.000Z

243

Poor agreement between continuous measurements of energy expenditure and routinely used prediction equations in intensive care unit patients  

Science Journals Connector (OSTI)

SummaryBackground & aims A wide variation in 24 h energy expenditure has been demonstrated previously in intensive care unit (ICU) patients. The accuracy of equations used to predict energy expenditure in critically ill patients is frequently compared with single or short-duration indirect calorimetry measurements, which may not represent the total energy expenditure (TEE) of these patients. To take into account this variability in energy expenditure, estimates have been compared with continuous indirect calorimetry measurements. Methods Continuous (24 h/day for ?5 days) indirect calorimetry measurements were made in patients requiring mechanical ventilation for ?5 days. The Harris-Benedict, Schofield and Ireton-Jones equations and the American College of Chest Physicians recommendation of 25 kcal/kg/day were used to estimate energy requirements. Results A total of 192 days of measurements, in 27 patients, were available for comparison with the different equations. Agreement between the equations and measured values was poor. The Harris-Benedict, Schofield and ACCP equations provided more estimates (66%, 66% and 65%, respectively) within 80% and 110% of TEE values. However, each of these equations would have resulted in clinically significant underfeeding (110% of TEE) in 18%, 19% and 13% of patients, respectively. Conclusions Limits of agreement between the different equations and TEE values were unacceptably wide. Prediction equations may result in significant under or overfeeding in the clinical setting.

Clare L. Reid

2007-01-01T23:59:59.000Z

244

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

et al. 2009. “Shift From Coke to Coal Using Direct Reductionadopted in China include: Coke Dry Quenching Theseand Hyman (2001) include coke-making energy use, Kim and

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

245

Sherwin-Williams’ Richmond, Kentucky, Facility Achieves 26% Energy Intensity Reduction; Leads to Corporate Adoption of Save Energy Now LEADER  

Broader source: Energy.gov [DOE]

This case study summarizes energy efficiency achievements made by Sherwin-Williams' Richmond, Kentucky, manufacturing facility under the Save Energy Now LEADER program, now known as the Better Plants Program. This includes a variety of steam system and compressed air technology improvements.

246

Integrated estimation of commercial sector end-use load shapes and energy use intensities  

SciTech Connect (OSTI)

The Southern California Edison Company (SCE) and the California Energy Commission (CEC) have contracted with the Energy Analysis Program of the Applied Science Division at the Lawrence Berkeley Laboratory (LBL) to develop an integrated set of commercial sector load shapes (LS) and energy utilization indices (EUI) for use in forecasting electricity demand. The objectives of this project are to conduct detailed analyses of SCE data on commercial building characteristics, energy use, and whole-building load shapes; and in conjunction with other data, to develop, test, and apply an integrated approach for the estimation of end-use LSs and EUIs. The project represents one of the first attempts to combine simulation-based, prototypical building analyses with direct reconciliation to measured hourly load data. The project examined electricity and gas use for nine building types, including large offices, small offices, large retails, small retails, food stores, sitdown restaurants, fastfood restaurants, refrigerated warehouses, and non-refrigerated warehouses. For each building type, nine end uses were examined, including cooling, heating, ventilation, indoor lighting, outdoor lighting, miscellaneous equipment, water heating, cooking, and refrigeration. For the HVAC end uses (cooling, ventilation, and heating), separate analyses were performed for three climate zones: coastal, inland, and desert.

Akbari, H.; Eto, J.; Turiel, I.; Heinemeier, K.; Lebot, B.; Nordman, B.; Rainer, L.

1989-01-01T23:59:59.000Z

247

Could energy intensive industries be powered by carbon-free electricity?  

E-Print Network [OSTI]

chemical services ­ for example, coal, converted to coke, acts as a reducing agent in blast furnaces.) (a comes from coal, oil, and natural gas. What infrastructure would be required to deliver the same amount to Royal Society TEX Paper #12;2 David J C MacKay FRS Primary energy consumption: 2740TWh/y Coal: 475 TWh

MacKay, David J.C.

248

Multi-energy CT based on a prior rank, intensity and sparsity model (PRISM) This article has been downloaded from IOPscience. Please scroll down to see the full text article.  

E-Print Network [OSTI]

Multi-energy CT based on a prior rank, intensity and sparsity model (PRISM) This article has been:10.1088/0266-5611/27/11/115012 Multi-energy CT based on a prior rank, intensity and sparsity model and sparsity of a multi-energy image, and intensity/spectral characteristics of base materials. Furthermore, we

Wang, Ge

249

Resonant energy conversion of 3-minute intensity oscillations into Alfven waves in the solar atmosphere  

E-Print Network [OSTI]

Nonlinear coupling between 3-minute oscillations and Alfven waves in the solar lower atmosphere is studied. 3-minute oscillations are considered as acoustic waves trapped in a chromospheric cavity and oscillating along transversally inhomogeneous vertical magnetic field. It is shown that under the action of the oscillations the temporal dynamics of Alfven waves is governed by Mathieu equation. Consequently, the harmonics of Alfven waves with twice period and wavelength of 3-minute oscillations grow exponentially in time near the layer where the sound and Alfven speeds equal. Thus the 3-minute oscillations are resonantly absorbed by pure Alfven waves near this resonant layer. The resonant Alfven waves may penetrate into the solar corona taking energy from the chromosphere. Therefore the layer c_s=v_A may play a role of energy channel for otherwise trapped acoustic oscillations.

D. Kuridze; T. V. Zaqarashvili

2007-03-19T23:59:59.000Z

250

Energy Use Intensity and its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Building: Preprint  

SciTech Connect (OSTI)

Net-zero energy buildings generate as much energy as they consume and are significant in the sustainable future of building design and construction. The role of daylighting (and its simulation) in the design process becomes critical. In this paper we present the process the National Renewable Energy Laboratory embarked on in the procurement, design, and construction of its newest building, the Research Support Facility (RSF) - particularly the roles of daylighting, electric lighting, and simulation. With a rapid construction schedule, the procurement, design, and construction had to be tightly integrated; with low energy use. We outline the process and measures required to manage a building design that could expect to operate at an efficiency previously unheard of for a building of this type, size, and density. Rigorous simulation of the daylighting and the electric lighting control response was a given, but the oft-ignored disconnect between lighting simulation and whole-building energy use simulation had to be addressed. The RSF project will be thoroughly evaluated for its performance for one year; preliminary data from the postoccupancy monitoring efforts will also be presented with an eye toward the current efficacy of building energy and lighting simulation.

Guglielmetti , R.; Scheib, J.; Pless, S. D.; Torcellini , P.; Petro, R.

2011-03-01T23:59:59.000Z

251

The Hobby-Eberly Telescope Dark Energy Experiment (HETDEX): Description and Early Pilot Survey Results  

E-Print Network [OSTI]

The Hobby-Eberly Telescope Dark Energy Experiment (HETDEX) will outfit the 10 m HET with a new wide field and an array of 150 integral-field spectrographs to survey a 420 sq. deg. area in the north Galactic cap. Each fiber-coupled unit spectrograph will cover 350-550 nm, simultaneously. This instrument, called VIRUS, will produce ~34,000 spectra per exposure, and will open up the emission-line universe to large surveys for the first time. The survey will detect 0.8 million Lyman-alpha emitting (LAE) galaxies with 1.9measure the expansion history at this early epoch using baryonic acoustic oscillations and the shape of the power spectrum. The aim of HETDEX is to provide a direct detection of dark energy at z~3. The measurement will constrain the evolution of dark energy and will also provide 0.1%-level accuracy on the curvature of the Universe, ten times better than current. The prototype of the VIRUS unit spectrograph (VIRUS-P) is a powerful instrument in its own right. Used on the McDonald 2.7 m, it covers the largest area of any integral field spectrograph, and reaches wavelengths down to 340 nm. VIRUS-P is being used for a pilot survey to better measure the properties of LAE galaxies in support of HETDEX. We report initial results from this survey.

G. J. Hill; K. Gebhardt; E. Komatsu; N. Drory; P. J. MacQueen; J. Adams; G. A. Blanc; R. Koehler; M. Rafal; M. M. Roth; A. Kelz; C. Gronwall; R. Ciardullo; D. P. Schneider

2008-06-01T23:59:59.000Z

252

Effects of high-energy intense multi-bunches proton beam on materials  

Science Journals Connector (OSTI)

Abstract The prediction of material response in case of interaction with successive high energy proton bunches requires new tools and multidisciplinary approaches. The impact leads the propagation of shock-waves, which travels through the hit component causing a substantial density reduction and the appearance of tunneling effect along the beam direction. For taking into account this effect, an automatic procedure, consisting in coupling FLUKA Monte-Carlo and FE LS-DYNA codes, is developed. The case study consists of the accidental loss of 60 bunches of one of the 7 TeV proton beams of the Large Hadron Collider (CERN) on a tungsten collimator.

M. Scapin; L. Peroni; V. Boccone; F. Cerutti

2014-01-01T23:59:59.000Z

253

Detailed Course Module Description  

Broader source: Energy.gov (indexed) [DOE]

Course Module Description Course Module Description Module/Learning Objectives Level of Detail in Module by Audience Consumers Gen Ed/ Community College Trades 1. Energy Issues and Building Solutions High High High Learning Objectives: * Define terms of building science, ecological systems, economics of consumption * Relate building science perspective, ecology, social science * Explain historical energy and environmental issues related to buildings * Compare Site and source energy * Examine the health, safety and comfort issues in buildings * Examine the general context for building solutions (zero energy green home with durability as the goal) * Explain a basic overview of alternative energy (total solar flux) - do we have enough energy * Examine cash flow to homeowners

254

The potential impacts of border tax adjustments on imports of energy-intensive goods in the EU and USA markets  

Science Journals Connector (OSTI)

Government action to address climate change has been very varied and industries in the developed world, especially those that which are energy intensive, are increasingly concerned about the potential negative impacts of abatement measures on their international competitiveness. This paper looks at the potential impacts of one measure which has been proposed to address these competitiveness concerns – border tax adjustments (BTAs). It finds that the potential impacts of such measures may not justify the complexity of their imposition. The impacts on competitiveness are likely to be limited and potential negative side effects on some poor developing countries cannot be ruled out. The country most likely to be impacted by BTAs in the EU and USA markets is China, while the low-income countries most likely to be affected are Niger, Mozambique and Tadjikistan, in the EU market and Liberia, Tadjikistan, and Uzbekistan in the USA market.

Louise Curran

2010-01-01T23:59:59.000Z

255

Measured commercial load shapes and energy-use intensities and validation of the LBL end-use disaggregation algorithm  

SciTech Connect (OSTI)

The Southern California Edison Company (SCE) has conducted an extensive metering project in which electricity end use in 53 commercial buildings in Southern California has been measured. The building types monitored include offices, retail stores, groceries, restaurants, and warehouses. One year (June 1989 through May 1990) of the SCE measured hourly end-use data are reviewed in this report. Annual whole-building and end-use energy use intensities (EUIs) and monthly load shapes (LSs) have been calculated for the different building types based on the monitored data. This report compares the monitored buildings' EUIs and LSs to EUIs and LSs determined using whole-building load data and the End-Use Disaggregation Algorithm (EDA). Two sets of EDA determined EUIs and LSs are compared to the monitored data values. The data sets represent: (1) average buildings in the SCE service territory and (2) specific buildings that were monitored.

Akbari, H.; Rainer, L.; Heinemeier, K.; Huang, J.; Franconi, E.

1993-01-01T23:59:59.000Z

256

Microscopic description of fission in Uranium isotopes with the Gogny energy density functional  

E-Print Network [OSTI]

The most recent parametrizations D1S, D1N and D1M of the Gogny energy density functional are used to describe fission in the isotopes $^{232-280}$ U. Fission paths, collective masses and zero point quantum corrections, obtained within the constrained Hartree-Fock-Bogoliubov approximation, are used to compute the systematics of the spontaneous fission half-lives $t_\\mathrm{SF}$, the masses and charges of the fission fragments as well as their intrinsic shapes. The Gogny-D1M parametrization has been benchmarked against available experimental data on inner and second barrier heights, excitation energies of the fission isomers and half-lives in a selected set of Pu, Cm, Cf, Fm, No, Rf, Sg, Hs and Fl nuclei. It is concluded that D1M represents a reasonable starting point to describe fission in heavy and superheavy nuclei. Special attention is also paid to understand the uncertainties in the predicted $t_\\mathrm{SF}$ values arising from the different building blocks entering the standard semi-classical Wentzel-Kramers-Brillouin formula. Although the uncertainties are large, the trend with mass or neutron numbers are well reproduced and therefore the theory still has predictive power. In this respect, it is also shown that modifications of a few per cent in the pairing strength can have a significant impact on the collective masses leading to uncertainties in the $t_\\mathrm{SF}$ values of several orders of magnitude.

R. Rodriguez-Guzman; L. M. Robledo

2014-05-25T23:59:59.000Z

257

Quantum geometrodynamical description of the dark sector of the matter-energy content of the universe  

E-Print Network [OSTI]

The evolution of the universe is studied in exactly solvable dynamical quantum model with the Robertson-Walker metric. It is shown that the equation of motion which describes the expansion or contraction of the universe can be represented in the form of the law of conservation of zero total energy for a particle with arbitrary mass being an analogue of the universe. The analogue particle moves in the potential well under the action of the internal force produced by the curvature of space, matter, and pressures of classical and quantum gravitational sources. This force has two components: one performs the positive work on the universe which is equivalent to the work of the repulsive forces of dark energy, and the other component does the negative work analogous to the work of the attractive forces of dark matter. Their competition determines the regime of the expansion of the universe: whether the universe would be accelerating or decelerating. It is demonstrated that predictions of the quantum model do not co...

,

2014-01-01T23:59:59.000Z

258

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

Fuel Oil Natural Gas million kWh NAICS Residual Fuel OilNAICS Iron and Steel Mills Steel Products from Purchased Steel Residual Fuel Oil Distillate Fuel Oil Natural GasNAICS Industry Other Shipments of Energy Sources Produced Onsite Total Electricity Residual Fuel Oil Distillate Fuel Oil Natural Gas

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

259

Scalar field cosmology in the energy phase-space-unified description of dynamics  

SciTech Connect (OSTI)

In this letter we apply dynamical system methods to study all evolutional paths admissible for all initial conditions of the FRW cosmological model with a non-minimally coupled to gravity scalar field and a barotropic fluid. We choose ''energy variables'' as phase variables. We reduce dynamics to a 3-dimensional dynamical system for an arbitrary potential of the scalar field in the phase space variables ({kappa}{phi}-dot /6{sup 1/2}H, {kappa}V{sup 1/2}/3{sup 1/2}H, {kappa}{phi}/6{sup 1/2}). After postulating the potential parameter {Gamma} as a function of {lambda} (defined as -V'/V) we reduce whole dynamics to a 3-dimensional dynamical system and study evolutional paths leading to current accelerating expansion. If we restrict the form of the potential then we will obtain a 2-dimensional dynamical system. We use the dynamical system approach to find a new generic quintessence scenario of approaching to the de Sitter attractor which appears only for the case of non-vanishing coupling constant.

Szydlowski, Marek [Astronomical Observatory, Jagiellonian University, Orla 171, 30-244 Krakow (Poland)] [Astronomical Observatory, Jagiellonian University, Orla 171, 30-244 Krakow (Poland); Hrycyna, Orest, E-mail: uoszydlo@cyf-kr.edu.pl, E-mail: hrycyna@kul.lublin.pl [Department of Theoretical Physics, Faculty of Philosophy, The John Paul II Catholic University of Lublin, Al. Raclawickie 14, 20-950 Lublin (Poland)] [Department of Theoretical Physics, Faculty of Philosophy, The John Paul II Catholic University of Lublin, Al. Raclawickie 14, 20-950 Lublin (Poland)

2009-01-15T23:59:59.000Z

260

Reduction in the intensity of solar X-ray emission in the 2- to 15-keV photon energy range and heating of the solar corona  

SciTech Connect (OSTI)

The time profiles of the energy spectra of low-intensity flares and the structure of the thermal background of the soft X-ray component of solar corona emission over the period of January-February, 2003, are investigated using the data of the RHESSI project. A reduction in the intensity of X-ray emission of the solar flares and the corona thermal background in the 2- to 15-keV photon energy range is revealed. The RHESSI data are compared with the data from the Interball-Geotail project. A new mechanism of solar corona heating is proposed on the basis of the results obtained.

Mirzoeva, I. K., E-mail: colombo2006@mail.ru [Russian Academy of Sciences, Space Research Institute (Russian Federation)

2013-04-15T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Descriptive Astronomy  

Science Journals Connector (OSTI)

... THIS is a text-book based on a new approach to the study of astronomy. Many elementary texts have considered primarily the historical and purely factual descriptive aspects of ... . Many elementary texts have considered primarily the historical and purely factual descriptive aspects of astronomy. Recently, there has been felt a growing need for a course emphasizing the physical ...

R. H. GARSTANG

1960-01-16T23:59:59.000Z

262

National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China  

SciTech Connect (OSTI)

Since 2006, China has set goals of reducing energy intensity, emissions, and pollutants in multiple guidelines and in the Five Year Plans. Various strategies and measures have then been taken to improve the energy efficiency in all sectors and to reduce pollutants. Since controlling energy, CO{sub 2} emissions, and pollutants falls under the jurisdiction of different government agencies in China, many strategies are being implemented to fulfill only one of these objectives. Co-controls or integrated measures could simultaneously reduce greenhouse gas (GHG) emissions and criteria air pollutant emissions. The targets could be met in a more cost effective manner if the integrated measures can be identified and prioritized. This report provides analysis and insights regarding how these targets could be met via co-control measures focusing on both CO{sub 2} and SO{sub 2} emissions in the cement, iron &steel, and power sectors to 2030 in China. An integrated national energy and emission model was developed in order to establish a baseline scenario that was used to assess the impact of actions already taken by the Chinese government as well as planned and expected actions. In addition, CO{sub 2} mitigation scenarios and SO{sub 2} control scenarios were also established to evaluate the impact of each of the measures and the combined effects. In the power sector, although the end of pipe SO{sub 2} control technology such as flue gas desulfurization (FGD) has the largest reduction potential for SO{sub 2} emissions, other CO{sub 2} control options have important co-benefits in reducing SO{sub 2} emissions of 52.6 Mt of SO{sub 2} accumulatively. Coal efficiency improvements along with hydropower, renewable and nuclear capacity expansion will result in more than half of the SO{sub 2} emission reductions as the SO{sub 2} control technology through 2016. In comparison, the reduction from carbon capture and sequestration (CCS) is much less and has negative SO{sub 2} reductions potential. The expanded biomass generation scenario does not have significant potential for reducing SO{sub 2} emissions, because of its limited availability. For the cement sector, the optimal co-control strategy includes accelerated adoption of energy efficiency measures, decreased use of clinker in cement production, increased use of alternative fuels, and fuel-switching to biomass. If desired, additional SO{sub 2} mitigation could be realized by more fully adopting SO{sub 2} abatement mitigation technology measures. The optimal co-control scenario results in annual SO{sub 2} emissions reductions in 2030 of 0.16 Mt SO{sub 2} and annual CO{sub 2} emissions reductions of 76 Mt CO{sub 2}. For the iron and steel sector, the optimal co-control strategy includes accelerated adoption of energy efficiency measures, increased share of electric arc furnace steel production, and reduced use of coal and increased use of natural gas in steel production. The strategy also assumes full implementation of sinter waste gas recycling and wet desulfurization. This strategy results in annual SO{sub 2} emissions reductions in 2030 of 1.3 Mt SO{sub 2} and annual CO{sub 2} emissions reductions of 173 Mt CO{sub 2}.

Zhou, Nan; Price, Lynn; Zheng, Nina; Ke, Jing; Hasanbeigi, Ali

2011-10-15T23:59:59.000Z

263

A New High-intensity, Low-momentum Muon Beam for the Generation of Low-energy Muons at PSI  

Science Journals Connector (OSTI)

At the Paul Scherrer Institute (PSI, Villigen, Switzerland) a new high-intensity muon beam line with momentum p...< 40 MeV/c is currently being commissioned. The beam line is especially designed to serve the need...

T. Prokscha; E. Morenzoni; K. Deiters; F. Foroughi; D. George…

2004-12-01T23:59:59.000Z

264

A New High-Intensity, Low-Momentum Muon Beam for the Generation of Low-Energy Muons at PSI  

Science Journals Connector (OSTI)

At the Paul Scherrer Institute (PSI, Villigen, Switzerland) a new high-intensity muon beam line with momentum p...< 40 MeV/c is currently being commissioned. The beam line is especially designed to serve the need...

T. Prokscha; E. Morenzoni; K. Deiters; F. Foroughi; D. George; R. Kobler…

2005-01-01T23:59:59.000Z

265

The relationship between maximum tolerated light intensity and photoprotective energy dissipation in the photosynthetic antenna: chloroplast gains and losses  

Science Journals Connector (OSTI)

...Zeaxanthin synthesis, energy dissipation, and photoprotection...1987 Physiological factors associated with fluorescence...Modulation of photosynthetic energy conversion efficiency in nature...photosystem II thermal energy dissipation on transfer...

2014-01-01T23:59:59.000Z

266

Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Program Description Program Description Discover E (Engineering) is an evening of interesting, interactive and fun engineering, science, math, and technology demonstrations for K-12 students and their parents or guardians. It is held in conjunction with National Engineers Week which is celebrated at the time of George Washington's birthday, our nation's first President, who was a military engineer and land surveyor. Activities include 30-50 interactive demonstrations of basic engineering, science, technology and math principles that may include robots, reverse engineering, casting, crystal structures, forensic science, the effects of liquid nitrogen, slide rule, sound waves, electrostatics, mechanics, materials properties and materials

267

Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Program Description Program Description SAGE, the Summer of Applied Geophysical Experience, is a unique educational program designed to introduce students in geophysics and related fields to "hands on" geophysical exploration and research. The program emphasizes both teaching of field methods and research related to basic science and a variety of applied problems. SAGE is hosted by the National Security Education Center and the Earth and Environmental Sciences Division of the Los Alamos National Laboratory. * teaches modern geophysical exploration techniques: seismic reflection and refraction, gravity and magnetics, electromagnetics (including magnetotellurics), and electrical resistivity * involves extensive hands-on field experience * integrates geophysical methods to solve real

268

National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China  

E-Print Network [OSTI]

as energy use per unit of gross domestic product (GDP) byas energy use per unit of gross domestic product (GDP) by

Zhou, Nan

2013-01-01T23:59:59.000Z

269

Neutron Halo Isomers in Stable Nuclei and their Possible Application for the Production of Low Energy, Pulsed, Polarized Neutron Beams of High Intensity and High Brilliance  

E-Print Network [OSTI]

We propose to search for neutron halo isomers populated via $\\gamma$-capture in stable nuclei with mass numbers of about A=140-180 or A=40-60, where the $4s_{1/2}$ or $3s_{1/2}$ neutron shell model state reaches zero binding energy. These halo nuclei can be produced for the first time with new $\\gamma$-beams of high intensity and small band width ($\\le$ 0.1%) achievable via Compton back-scattering off brilliant electron beams thus offering a promising perspective to selectively populate these isomers with small separation energies of 1 eV to a few keV. Similar to single-neutron halo states for very light, extremely neutron-rich, radioactive nuclei \\cite{hansen95,tanihata96,aumann00}, the low neutron separation energy and short-range nuclear force allows the neutron to tunnel far out into free space much beyond the nuclear core radius. This results in prolonged half lives of the isomers for the $\\gamma$-decay back to the ground state in the 100 ps-$\\mu$s range. Similar to the treatment of photodisintegration of the deuteron, the neutron release from the neutron halo isomer via a second, low-energy, intense photon beam has a known much larger cross section with a typical energy threshold behavior. In the second step, the neutrons can be released as a low-energy, pulsed, polarized neutron beam of high intensity and high brilliance, possibly being much superior to presently existing beams from reactors or spallation neutron sources.

D. Habs; M. Gross; P. G. Thirolf; P. Böni

2010-09-30T23:59:59.000Z

270

Accelerators for Intensity Frontier Research  

SciTech Connect (OSTI)

In 2008, the Particle Physics Project Prioritization Panel identified three frontiers for research in high energy physics, the Energy Frontier, the Intensity Frontier, and the Cosmic Frontier. In this paper, I will describe how Fermilab is configuring and upgrading the accelerator complex, prior to the development of Project X, in support of the Intensity Frontier.

Derwent, Paul; /Fermilab

2012-05-11T23:59:59.000Z

271

Sensitivity to dark energy candidates by searching for four-wave mixing of high-intensity lasers in the vacuum  

Science Journals Connector (OSTI)

......the energy frontier of high-energy physics is, of course, to produce new heavy particles; therefore, the realization of the high CMS energy is the most important task...Non-Newtonian Gravity (1998) New York: AIP Press. 17 Fujii Y......

Kensuke Homma

2012-01-01T23:59:59.000Z

272

Manifestation of quantum chaos on scattering techniques: application to low-energy and photo-electron diffraction intensities  

E-Print Network [OSTI]

Intensities of LEED and PED are analyzed from a statistical point of view. The probability distribution is compared with a Porter-Thomas law, characteristic of a chaotic quantum system. The agreement obtained is understood in terms of analogies between simple models and Berry's conjecture for a typical wavefunction of a chaotic system. The consequences of this behaviour on surface structural analysis are qualitatively discussed by looking at the behaviour of standard correlation factors.

P. L. de Andres; J. A. Vergés

1997-10-08T23:59:59.000Z

273

International Energy Outlook 1998  

Gasoline and Diesel Fuel Update (EIA)

B B World Energy Projection System The projections of world energy consumption published annually by the Energy Information Administration (EIA) in the International Energy Outlook (IEO) are derived from the World Energy Projection System (WEPS). WEPS is an integrated set of personal-computer-based spreadsheets containing data compilations, assumption specifications, descriptive analysis procedures, and projection models. The WEPS accounting framework incorporates projections from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product [GDP]) and about the rate of incremental energy requirements met by natural gas, coal, and renewable energy sources (hydroelectricity, geothermal, solar, wind, biomass, and

274

VISION Model: Description of Model Used to Estimate the Impact of Highway Vehicle Technologies and Fuels on Energy Use and Carbon Emissions to 2050  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ESD/04-1 ESD/04-1 VISION Model: Description of Model Used to Estimate the Impact of Highway Vehicle Technologies and Fuels on Energy Use and Carbon Emissions to 2050 Center for Transportation Research Argonne National Laboratory Operated by The University of Chicago, under Contract W-31-109-Eng-38, for the United States Department of Energy Argonne National Laboratory, a U.S. Department of Energy Office of Science laboratory, is operated by The University of Chicago under contract W-31-109-Eng-38. DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor The University of Chicago, nor any of their employees or officers, makes any warranty, express or implied, or assumes

275

Manuscript Submitted to Solar Energy 4/2002 A NEW OPERATIONAL SATELLITE-TO-IRRADIANCE MODEL DESCRIPTION AND VALIDATION  

E-Print Network [OSTI]

Manuscript Submitted to Solar Energy 4/2002 A NEW OPERATIONAL SATELLITE-TO-IRRADIANCE MODEL, OR, USA #12;Manuscript Submitted to Solar Energy 4/2002 ABSTRACT We present a new simple model zenith angle to account for first order solar #12;Manuscript Submitted to Solar Energy 4/2002 geometry

Perez, Richard R.

276

Problem Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Description Description Model Domain 2-D Radial Grid System : 1000 m x 60 m 25 m 25 m 10 m Hydrate Zone 1000 m Shale Shale Discretization Model 1 (200 x 30) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 30 cells (5 x 5 m, 20 x 0.5 m, 5 x 5 m) Model 2 (200 x 11) r direction : 200 cells logarithmically distributed from r w = 0.10795 m to r 200 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls") z direction : 11 cells (5 x 5 m, 1 x 10.0 m, 5 x 5 m) Model 3 (50 x 30) r direction : 50 cells logarithmically distributed from r w = 0.10795 m to r 50 = 1000 m (inner most grid size Δr 1 = 0.02 m, see "P5_discretization.xls")

277

Interference-induced enhancement of intensity and energy of a multimode quantum optical field by a subwavelength array of coherent light sources  

E-Print Network [OSTI]

Recently, we have showed a mechanism that could provide a great transmission enhancement of the light waves passed through subwavelength aperture arrays in thin metal films not by the plasmon-polariton waves, but by the constructive interference of diffracted waves (beams generated by the apertures) at the detector placed in the far-field zone. We now present a quantum reformulation of the model. The Hamiltonian describing the interference-induced enhancement of the intensity and energy of a multimode quantum optical field is derived. Such a field can be produced, for instance, by a subwavelength array of coherent light sources.

S. V. Kukhlevsky

2008-06-13T23:59:59.000Z

278

Role of Modeling When Designing for Absolute Energy Use Intensity Requirements in a Design-Build Framework: Preprint  

SciTech Connect (OSTI)

The Research Support Facility was designed to use half the energy of an equivalent minimally code-compliant building, and to produce as much renewable energy as it consumes on an annual basis. These energy goals and their substantiation through simulation were explicitly included in the project's fixed firm price design-build contract. The energy model had to be continuously updated during the design process and to match the final building as-built to the greatest degree possible. Computer modeling played a key role throughout the design process and in verifying that the contractual energy goals would be met within the specified budget. The main tool was a whole building energy simulation program. Other models were used to provide more detail or to complement the whole building simulation tool. Results from these specialized models were fed back into the main whole building simulation tool to provide the most accurate possible inputs for annual simulations. This paper will detail the models used in the design process and how they informed important program and design decisions on the path from preliminary design to the completed building.

Hirsch, A.; Pless, S.; Guglielmetti, R.; Torcellini, P. A.; Okada, D.; Antia, P.

2011-03-01T23:59:59.000Z

279

Longevity of the quark-gluon plasma and the mixed phase from intensity interferometry of high energy photons  

E-Print Network [OSTI]

Two-photon intensity interferometry is shown to provide an accurate measurement of lifetime of quark-gluon plasma created in ultra-relativistic heavy ion collisions via the difference of outward and sidewardcorrelation radii. Under the assumption of a longitudinal, boost invariant expansion of the plasma, we obtain analytical expressions for the correlations from the quark-gluon plasma phase. A $3+1$ dimensional expansion of the plasma along with a first order phase transition to hadrons is next considered, and, leads to a source with two characteristic lifetimes, one for the quark-gluon plasma phase, and the other for the longer lived mixed phase. This may even help us to {\\em experimentally} determine the order of the phase transition.

Dinesh K. Srivastava; Charles Gale

1993-11-10T23:59:59.000Z

280

Climate Studies with a Multi-Layer Energy Balance Model. Part I: Model Description and Sensitivity to the Solar Constant  

Science Journals Connector (OSTI)

A nine-layer, zonally averaged, steady-state model has been developed for use in climate sensitivity studies. The model is based upon thermal energy balance and includes recently developed accurate treatment of radiative transfer, parameterized ...

Li Peng; Ming-Dah Chou; Albert Arking

1982-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

OESYS : a simulation tool for non-conventional energy applications analysis : theoretical and operational description with user documentation  

E-Print Network [OSTI]

A method is developed for assessing both the operational and economic performance of variable mixes of energy conversion technologies within their specific service environments. This method is incorporated into OESYS ...

Dinwoodie, Thomas L.

1980-01-01T23:59:59.000Z

282

California Baseline Energy Demands to 2050 for Advanced Energy Pathways  

E-Print Network [OSTI]

that energy efficiency or energy intensity for a particularbased upon trends in energy intensity parameters which areBuilding type (12) Energy intensity Industrial Shipments

McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

2008-01-01T23:59:59.000Z

283

Impact of high energy high intensity proton beams on targets: Case studies for Super Proton Synchrotron and Large Hadron Collider  

Science Journals Connector (OSTI)

The Large Hadron Collider (LHC) is designed to collide two proton beams with unprecedented particle energy of 7 TeV. Each beam comprises 2808 bunches and the separation between two neighboring bunches is 25 ns. The energy stored in each beam is 362 MJ, sufficient to melt 500 kg copper. Safety of operation is very important when working with such powerful beams. An accidental release of even a very small fraction of the beam energy can result in severe damage to the equipment. The machine protection system is essential to handle all types of possible accidental hazards; however, it is important to know about possible consequences of failures. One of the critical failure scenarios is when the entire beam is lost at a single point. In this paper we present detailed numerical simulations of the full impact of one LHC beam on a cylindrical solid carbon target. First, the energy deposition by the protons is calculated with the FLUKA code and this energy deposition is used in the BIG2 code to study the corresponding thermodynamic and the hydrodynamic response of the target that leads to a reduction in the density. The modified density distribution is used in FLUKA to calculate new energy loss distribution and the two codes are thus run iteratively. A suitable iteration step is considered to be the time interval during which the target density along the axis decreases by 15%–20%. Our simulations suggest that the full LHC proton beam penetrates up to 25 m in solid carbon whereas the range of the shower from a single proton in solid carbon is just about 3 m (hydrodynamic tunneling effect). It is planned to perform experiments at the experimental facility HiRadMat (High Radiation Materials) at CERN using the proton beam from the Super Proton Synchrotron (SPS), to compare experimental results with the theoretical predictions. Therefore simulations of the response of a solid copper cylindrical target hit by the SPS beam were performed. The particle energy in the SPS beam is 440 GeV while it has the same bunch structure as the LHC beam, except that it has only up to 288 bunches. Beam focal spot sizes of ?=0.1, 0.2, and 0.5 mm have been considered. The phenomenon of significant hydrodynamic tunneling due to the hydrodynamic effects is also expected for the experiments.

N. A. Tahir, J. Blanco Sancho, A. Shutov, R. Schmidt, and A. R. Piriz

2012-05-08T23:59:59.000Z

284

Nonequilibrium free energy, H theorem and self-sustained oscillations for Boltzmann-BGK descriptions of semiconductor superlattices  

E-Print Network [OSTI]

Semiconductor superlattices (SL) may be described by a Boltzmann-Poisson kinetic equation with a Bhatnagar-Gross-Krook (BGK) collision term which preserves charge, but not momentum or energy. Under appropriate boundary and voltage bias conditions, these equations exhibit time-periodic oscillations of the current caused by repeated nucleation and motion of charge dipole waves. Despite this clear nonequilibrium behavior, if we `close' the system by attaching insulated contacts to the superlattice and keeping its voltage bias to zero volts, we can prove the H theorem, namely that a free energy $\\Phi(t)$ of the kinetic equations is a Lyapunov functional ($\\Phi\\geq 0$, $d\\Phi/dt\\leq 0$). Numerical simulations confirm that the free energy decays to its equilibrium value for a closed SL, whereas for an `open' SL under appropriate dc voltage bias and contact conductivity $\\Phi(t)$ oscillates in time with the same frequency as the current self-sustained oscillations.

M Alvaro; L L Bonilla

2010-12-14T23:59:59.000Z

285

Origin of protons accelerated by an intense laser and the dependence of their energy on the plasma density  

Science Journals Connector (OSTI)

We study the high-energy (1–4 MeV) proton production from a slab plasma irradiated by a ultrashort high-power laser. In our 2.5-dimensional particle-in-cell simulations, a p-polarized laser beam of 1.6×1019 W/cm2, 300 fs, ?L=1.053 ?m, illuminates a slab plasma normally; the slab plasma consists of a hydrogen plasma, and the target plasma thickness and the laser spot size are 2.5?L and 5?L, respectively. The simulation results show that an emitted proton energy depends on the slab plasma density, and three kinds of high-energy proton beams are generated at the target plasma surfaces: one kind of the proton beams is produced at the laser-illuminated target surface and accelerated to the same laser-incident side. The second is generated at the target surface opposite to the laser-illuminated target surface and is accelerated outward on the same side. The third is generated at the laser-illuminated target surface and accelerated to the opposite side while passing through the target plasma. The simulations also show a mechanism of proton accelerations. In an overdense plasma, laser energy goes to energies of hot electrons and magnetic fields in part; the electrons oscillate around the slab plasma so that a static electric field is generated and consequently protons are extracted. The magnetic field generated in the slab plasma exists longer and heats up the plasma electrons to sustain the static electric field even after the laser termination.

Takashi Nakamura and Shigeo Kawata

2003-02-06T23:59:59.000Z

286

Woodland owners' attitudes towards energy from forest biomass in a carbon-intensive jurisdiction: Case study of Nova Scotia, Canada  

Science Journals Connector (OSTI)

Abstract The use of forest biomass in thermal generation processes has been recognized by the Government of Nova Scotia (NS) as one option that could help meet its renewable electricity goals (25% by 2015 and 40% by 2020). Over half of the woodland in NS is owned by small-private woodland owners (51%), indicating that they could significantly influence the future of NS forests and its potential use for energy purposes. This paper presents the results of a survey of small-woodland owners on their attitudes towards using energy from forest biomass. 489 small-woodland owners responded to mail-out surveys and 14 rural community members participated in three focus groups. Three major findings emerged. First, it was found that the acceptability of using forest products varied depending on multiple factors – the source of biomass, harvesting methods, and [predicted] end-use. Second, forest sustainability and keeping resources local were the two most important concerns amongst respondents. Finally, respondents felt that better collaboration with other stakeholders and education around the issues would be the best strategies for overcoming these concerns. The paper also highlights the barriers and drivers as perceived by the woodland owners as they relate to the possibility of using more biomass for energy in the future.

Margo MacGregor; Michelle Adams; Peter Duinker

2014-01-01T23:59:59.000Z

287

Research Project Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research Project Description No job description found Current Research Opportunities Viral Hepatitis Prevention Fellowship Climate Change Communication Internship Applied Molecular...

288

Geothermal Energy Market Study on the Atlantic Coastal Plain. GRITS (Version 9): Model Description and User's Guide  

SciTech Connect (OSTI)

The Geothermal Resource Interactive Temporal Simulation (GRITS) model calculates the cost and revenue streams for the lifetime of a project that utilizes low to moderate temperature geothermal resources. With these estimates, the net present value of the project is determined. The GRITS model allows preliminary economic evaluations of direct-use applications of geothermal energy under a wide range of resource, demand, and financial conditions, some of which change over the lifetime of the project.

Kroll, Peter; Kane, Sally Minch [eds.

1982-04-01T23:59:59.000Z

289

Equation-of-state properties of high-energy-density matter using intense heavy ion beams with an annular focal spot  

Science Journals Connector (OSTI)

This paper presents two-dimensional numerical simulations of the hydrodynamic response of solid as well as hollow cylindrical targets made of lead that are irradiated by an intense beam of uranium ions which has an annular focal spot. Using a particle tracking computer code, it has been shown that a plasma lens can generate such a beam with parameters used in the calculations presented in this paper. The total number of particles in the beam is 2×1011 and the particle energy is about 200 MeV/u that means a total energy of approximately 1.5 kJ. This energy is delivered in a pulse that is 50 ns long. These beam parameters lead to a specific energy deposition of 50–100 kJ/g and a specific power deposition of 1–2 TW/g in solid matter. These calculations show that in case of the solid lead cylinder, it may be possible to achieve more than 4 times solid lead density along the cylinder axis at the time of maximum compression. The pressure in the compressed region is about 20 Mbar and the temperature is a few eV. In the case of a hollow cylinder, one also achieves the same degree of compression but now the temperature in the compressed region is much higher (over 10 eV). Such samples of highly compressed matter can be used to study the equation-of-state properties of high-energy-density matter. It is expected that by the end of the year 2001, after completion of the upgrade of the existing facilities, the above beam parameters will be available at the Gesellschaft für Schwerionenforschung (GSI), Darmstadt. This will open up the possibility to carry out very interesting experiments on a number of important problems including the investigation of the EOS of high-energy-density matter.

N. A. Tahir, D. H. H. Hoffmann, A. Kozyreva, A. Shutov, J. A. Maruhn, U. Neuner, A. Tauschwitz, P. Spiller, and R. Bock

2000-07-01T23:59:59.000Z

290

Origin of Reflection High-Energy Electron-Diffraction Intensity Oscillations during Molecular-Beam Epitaxy: A Computational Modeling Approach  

Science Journals Connector (OSTI)

Temporal oscillations in the specular beam of reflection high-energy electron diffraction (RHEED) provide the primary method of monitoring growth by molecular-beam epitaxy. We develop a model to investigate the origin of these oscillations with which, by monitoring the step density of a growing sample, we are able to reproduce all of the principal features of recent RHEED measurements. Our work demonstrates the considerable advantages in adoption of simple monatomic growth models instead of the complex models used for studying the growth of compound semiconductors.

Shaun Clarke and Dimitri D. Vvedensky

1987-05-25T23:59:59.000Z

291

An indoorâ??outdoor building energy simulator to study urban modification effects on building energy use â?? Model description and validation  

E-Print Network [OSTI]

Difference Thermal  Modeling, Building and Environment 20 (required in building energy modeling (one year). Bouyer etenergy modeling of individual buildings and urban canopies, 

Yaghoobian, Neda; Kleissl, Jan

2012-01-01T23:59:59.000Z

292

Surface structure of coadsorbed benzene and carbon monoxide on the rhodium(111) single crystal analyzed with low-energy electron diffraction intensities  

SciTech Connect (OSTI)

The first structural analysis of a molecular coadsorbate system is presented. Mutual reordering and site shifting are found to occur for benzene and CO coadsorbed in a (/sub 13//sup 31/) lattice on Rh(111). This low-energy electron diffraction (LEED) intensity analysis yields the first confirmed hollow-site adsorption of CO on a single-crystal metal surface, with a C-O bond length expanded by 0.06 +/- 0.05 A from the gas phase. The flat-lying benzene is found centered over hcp-type hollow sites with a strong Kekule-type distortion: C-C bond lengths alternate between 1.33 +/- 0.15 A (hydrogen positions were not determined). This suggests the possibility of a 1,3,5-cyclohexatriene species being formed. The Rh-C bond length is 2.35 +/- 0.05 A for benzene and 2.16 +/- 0.04 A for CO.

Van Hove, M.A.; Lin, R.F.; Somorjai, G.A.

1986-05-14T23:59:59.000Z

293

Measured commercial load shapes and energy-use intensities and validation of the LBL end-use disaggregation algorithm. Final report  

SciTech Connect (OSTI)

The Southern California Edison Company (SCE) has conducted an extensive metering project in which electricity end use in 53 commercial buildings in Southern California has been measured. The building types monitored include offices, retail stores, groceries, restaurants, and warehouses. One year (June 1989 through May 1990) of the SCE measured hourly end-use data are reviewed in this report. Annual whole-building and end-use energy use intensities (EUIs) and monthly load shapes (LSs) have been calculated for the different building types based on the monitored data. This report compares the monitored buildings` EUIs and LSs to EUIs and LSs determined using whole-building load data and the End-Use Disaggregation Algorithm (EDA). Two sets of EDA determined EUIs and LSs are compared to the monitored data values. The data sets represent: (1) average buildings in the SCE service territory and (2) specific buildings that were monitored.

Akbari, H.; Rainer, L.; Heinemeier, K.; Huang, J.; Franconi, E.

1993-01-01T23:59:59.000Z

294

Compression and acceleration of electron bunches to high energies in the interference field of intense laser pulses with tilted amplitude fronts: concept and modelling  

SciTech Connect (OSTI)

A new concept of accelerating electrons by laser radiation is proposed, namely, direct acceleration by a laser field under the conditions of interference of several relativistic-intensity laser pulses with amplitude fronts tilted by the angle 45 Degree-Sign with respect to the phase fronts. Due to such interference the traps moving with the speed of light arise that capture the electrons, produced in the process of ionisation of low-density gas by the same laser radiation. The modelling on the basis of solving the relativistic Newton equation with the appropriate Lorenz force shows that these traps, moving in space, successively collect electrons from the target, compress the resulting electron ensemble in all directions up to the dimensions smaller than the wavelength of the laser radiation and accelerate it up to the energies of the order of a few GeV per electron. (extreme light fields and their applications)

Korobkin, V V; Romanovsky, Mikhail Yu; Trofimov, V A; Shiryaev, O B [A M Prokhorov General Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation)

2013-03-31T23:59:59.000Z

295

Integrated estimation of commercial sector end-use load shapes and energy use intensities in the PG&E service area  

SciTech Connect (OSTI)

This project represents a unique research effort to address the commercial sector end-use energy forecasting data needs of the Pacific Gas and Electric Company (PG&E) and the California Energy Commission (CEC). The object of the project was to develop an updated set of commercial sector end-use energy use intensity (EUI) data that has been fully reconciled with measured data. The research was conducted in two stages. First, we developed reconciled electricity end-use EUIs and load shapes for each of the 11 building types in the inland and coastal regions of the PG&E service territory using information collected in 1986. Second, we developed procedures to translate these results into a consistent set of commercial sector forecasting model inputs recognizing the separate modeling conventions used by PG&E and CEC. EUIs have been developed for: II commercial building types; up to 10 end uses; up to 3 fuel types; 2 and 5 subservice territory forecasting regions (as specified by the PG&E and CEC forecasting models, respectively); and up to 2 distinct vintages corresponding to the period prior to and immediately following the adoption of the first generation of California building and equipment standards. For the electricity end uses, 36 sets of daily load shapes have been developed representing average weekday, average weekend, and peak weekday electricity use for each month of the year by building type for both the inland and coastal climate zones.

Akbari, H.; Eto, J.; Konopacki, S.; Afzal, A.; Heinemeier, K.; Rainer, L.

1993-12-01T23:59:59.000Z

296

An indoorâ??outdoor building energy simulator to study urban modification effects on building energy use â?? Model description and validation  

E-Print Network [OSTI]

simulating effects of the waste heat from air?conditioning 8]). Anthropogenic waste heat (e.g. from transportation,temperature and HVAC waste heat from EnergyPlus are passed

Yaghoobian, Neda; Kleissl, Jan

2012-01-01T23:59:59.000Z

297

Theoretical description of spin-resolved appearance potential spectroscopy  

Science Journals Connector (OSTI)

A theoretical description of spin-resolved appearance potential spectroscopy is presented on the basis of a single-particle description of the underlying electronic structure. The final expression for the signal intensity turns out to be essentially a cross-section-weighted self-convolution of the density of states above the Fermi energy, in close analogy to the result for core-valence-valence Auger electron spectroscopy. Application of the formalism presented to bcc Fe and fcc Ni leads to results in very satisfying agreement with corresponding experimental data. Because this is achieved only by treating the involved transition matrix elements in a proper way, their properties are discussed in some detail.

H. Ebert and V. Popescu

1997-11-15T23:59:59.000Z

298

Integrated Planning for Water and Energy Systems  

E-Print Network [OSTI]

Policy 2. Energy Intensity of Water 3. Water Intensity of Energy 1. Integrated Energy and Water Policy 2. Energy Intensity of Water 3. Water Intensity of Energy #12;Total Water Withdrawals, 2000Total Water at Edmonston #12;Energy Intensity of WaterEnergy Intensity of Water Energy intensity, or embedded energy

Keller, Arturo A.

299

California’s Energy Future: Transportation Energy Use in California  

E-Print Network [OSTI]

travel demand, reducing energy intensity and reducing carbonVehicles Vehicle Energy Intensity (E) MPGGE 1990 CA Fleetthe improvements in energy intensity that could be achieved

Yang, Christopher

2011-01-01T23:59:59.000Z

300

Energy Efficiency Indicators Methodology Booklet  

E-Print Network [OSTI]

for the monitoring of energy intensity developments in theSchaeffer. 1997. Energy intensity in the iron and steelParity Internationally, Energy Intensity of GDP or subsector

Sathaye, Jayant

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Quantitative Measurements of X-ray Intensity  

SciTech Connect (OSTI)

This chapter describes the characterization of several X-ray sources and their use in calibrating different types of X-ray cameras at National Security Technologies, LLC (NSTec). The cameras are employed in experimental plasma studies at Lawrence Livermore National Laboratory (LLNL), including the National Ignition Facility (NIF). The sources provide X-rays in the energy range from several hundred eV to 110 keV. The key to this effort is measuring the X-ray beam intensity accurately and traceable to international standards. This is accomplished using photodiodes of several types that are calibrated using radioactive sources and a synchrotron source using methods and materials that are traceable to the U.S. National Institute of Standards and Technology (NIST). The accreditation procedures are described. The chapter begins with an introduction to the fundamental concepts of X-ray physics. The types of X-ray sources that are used for device calibration are described. The next section describes the photodiode types that are used for measuring X-ray intensity: power measuring photodiodes, energy dispersive photodiodes, and cameras comprising photodiodes as pixel elements. Following their description, the methods used to calibrate the primary detectors, the power measuring photodiodes and the energy dispersive photodiodes, as well as the method used to get traceability to international standards are described. The X-ray source beams can then be measured using the primary detectors. The final section then describes the use of the calibrated X-ray beams to calibrate X-ray cameras. Many of the references are web sites that provide databases, explanations of the data and how it was generated, and data calculations for specific cases. Several general reference books related to the major topics are included. Papers expanding some subjects are cited.

Haugh, M. J., Schneider, M.

2011-09-01T23:59:59.000Z

302

Vibration intensity difference thresholds.  

E-Print Network [OSTI]

??The intensity difference threshold is defined as ‘the difference in the intensity of two stimuli which is just sufficient for their difference to be detected’.… (more)

Forta, Nazim Gizem

2009-01-01T23:59:59.000Z

303

Notices Description: Entergy Services, Inc.  

Broader source: Energy.gov (indexed) [DOE]

19 Federal Register 19 Federal Register / Vol. 76, No. 139 / Wednesday, July 20, 2011 / Notices Description: Entergy Services, Inc. Response to May 13, 2011 Deficiency Letter. Filed Date: 07/12/2011. Accession Number: 20110712-5164. Comment Date: 5 p.m. Eastern Time on Tuesday, August 02, 2011. Docket Numbers: ER11-2206-001. Applicants: Alta Wind V, LLC. Description: Alta Wind V, LLC, Notice of Non-Material Change in Status. Filed Date: 07/13/2011. Accession Number: 20110713-5091. Comment Date: 5 p.m. Eastern Time on Wednesday, August 03, 2011. Docket Numbers: ER11-3727-001. Applicants: El Segundo Energy Center LLC. Description: El Segundo Energy Center LLC submits tariff filing per 35.17(b): Supplement to Application for Market-Based Rate Authority to be effective 8/5/2011.

304

Estimating Total Energy Consumption and Emissions of China's Commercial and Office Buildings  

E-Print Network [OSTI]

material intensity, energy intensity of materials, buildingtype’s manufacturing energy intensity (how much energy itthe manufacturing energy intensity of each type of building

Fridley, David G.

2008-01-01T23:59:59.000Z

305

Towards a Sustainable Energy Balance: Progressive Efficiency and the Return of Energy Conservation  

E-Print Network [OSTI]

PNNL). 2005. “Indicators of Energy Intensity in the Unitedan extensive variable; the energy intensity of the economy,cited most often, site energy intensity (energy per unit of

Harris, Jeffrey; Diamond, Rick; Iyer, Maithili; Payne, Christopher; Blumstein, Carl; Siderius, Hans-Paul

2007-01-01T23:59:59.000Z

306

Neutral particle beam intensity controller  

DOE Patents [OSTI]

The neutral beam intensity controller is based on selected magnetic defocusing of the ion beam prior to neutralization. The defocused portion of the beam is dumped onto a beam dump disposed perpendicular to the beam axis. Selective defocusing is accomplished by means of a magnetic field generator disposed about the neutralizer so that the field is transverse to the beam axis. The magnetic field intensity is varied to provide the selected partial beam defocusing of the ions prior to neutralization. The desired focused neutral beam portion passes along the beam path through a defining aperture in the beam dump, thereby controlling the desired fraction of neutral particles transmitted to a utilization device without altering the kinetic energy level of the desired neutral particle fraction. By proper selection of the magnetic field intensity, virtually zero through 100% intensity control of the neutral beam is achieved.

Dagenhart, W.K.

1984-05-29T23:59:59.000Z

307

Alternative Energy Development and China's Energy Future  

E-Print Network [OSTI]

40 Table 17. Uranium Ore Mining and Milling Energy Intensity45 Table 20. Energy Intensity for Nuclear Fuel Cycleset out to reduce its energy intensity as defined by energy

Zheng, Nina

2012-01-01T23:59:59.000Z

308

Project Description: page 1 Project Description  

E-Print Network [OSTI]

Project Description: page 1 Project Description I. Introduction: Josephson junction networks Over the past 25 years, superconducting Josephson junctions have gradually become one of the major topics standards. Our research uses Josephson junctions as model systems for problems in nonlinear and neural

Segall, Ken

309

Student Groups Student Group Description Short Description  

E-Print Network [OSTI]

Student Groups Student Group Description Short Description AHR Scholar-Architecture Scholar ART Honors - Architecture Honors H04 Honors - Allied Medical Prof Honors H05 Honors - Arts & Sciences Honors H14 Honors - Envir&Natural Resources Honors H15 Honors - Food, Agr, & Envir Sci Honors H16 Honors

310

Design and construction of equipment for determining the zenith-angle dependence of the high-energy mu-meson intensity at sea level  

E-Print Network [OSTI]

AIlnent of the requirements for the degree of RASTER CF SCIENCE June 1954 Rior Sub)ectc Physics CONTENTS Introc1nc tion ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ (halitative Theory of the Design of the apparatus. . . . . . . 3 Description of the kppazntns...

Anderson, Floyd Chris

2012-06-07T23:59:59.000Z

311

Measuring Changes in Energy Efficiency for the Annual Energy Outlook 2002  

Gasoline and Diesel Fuel Update (EIA)

Changes in Energy Efficiency Changes in Energy Efficiency for the Annual Energy Outlook 2002 by Steven H. Wade This paper describes the construction of an aggregate energy efficiency index based on projections of sectoral and subsector energy consumption and subsector-specific energy service indicators. The results are compared with the ratio energy to real gross domestic product, which typically is pre- sented as a measure of energy intensity. Introduction Energy efficiency and conservation are currently impor- tant components of the debate about the direction of future energy policy. Measuring the actual energy effi- ciency of the U.S. economy is a daunting task because of the immense data requirements for a proper calculation. Appropriate data are difficult to obtain, and as a result historical descriptions of the economy usually are sum- marized in two energy intensity measures: (1) energy

312

Intensive Skills Activities CAREERS SERVICE  

E-Print Network [OSTI]

in the state under the cover of night and in broad daylight, perhaps swimming in ship ballast water, tucked and the rest of the world focus more intensely on producing fuels and energy from grasses and other non to subscribe (it's free!), send a note to Futures Editor, 109 Agriculture Hall, Michigan State University, East

Bristol, University of

313

Segmentation and recovery of SHGCs from a real intensity image  

Science Journals Connector (OSTI)

We address the problem of scene segmentation and shape recovery from a single real intensity image. Solving this problem is central to obtaining 3-D scene descriptions in realistic applications where perfect data...

Mourad Zerroug; Ramakant Nevatia

1994-01-01T23:59:59.000Z

314

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Energy Consumption Survey (CBECS) > Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 and 2003 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

315

Mechanical Engineer Company Description  

E-Print Network [OSTI]

Mechanical Engineer Company Description Control Solutions Inc. is a small, dynamic, and rapidly. Position Description The Mechanical Engineer is responsible for all aspects associated with the mechanical enclosures, brackets, cabling assemblies among others. Systems include mechanisms, sensors, hydraulics, among

Kostic, Milivoje M.

316

Influence of nanosized semiconducting additives on the properties of energy-storage phase-change materials subjected to a high-intensity electron beam  

Science Journals Connector (OSTI)

The stability of paraffin with a different concentration of copper nanopowder (a particle size of 50 and 100 nm) against a high-intensity nanosecond electron beam is studied experimentally. It is shown that th...

G. G. Savenkov; V. A. Morozov; V. A. Bragin; V. M. Kats; A. A. Lukin

2013-07-01T23:59:59.000Z

317

WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,  

E-Print Network [OSTI]

Fuel oil and Turkey Based Biofuel Energy Rocovery 12,000 Industrial Waste $30,000 $500 $29,500 1500WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2006 WASTE TYPE DESCRIPTION DETAILS * Aerosol Can Disposal System Recycling 528 66 pounds of hazardous waste per unit $7

318

Description of CBECS Building Types  

U.S. Energy Information Administration (EIA) Indexed Site

Description of Building Types Description of Building Types Description of CBECS Building Types In the Commercial Buildings Energy Consumption Survey (CBECS), buildings are classified according to principal activity, which is the primary business, commerce, or function carried on within each building. Buildings used for more than one of the activities described below are assigned to the activity occupying the most floorspace at the time of the interview. Thus, a building assigned to a particular principal activity category may be used for other activities in a portion of its space or at some time during the year. In the 1999 CBECS, respondents were asked to place their building into a sub-category that was a more specific activity than has been collected in prior surveys. This was done to ensure the quality of the data; after data collection, the subcategories were combined into these more general building categories, which are consistent with prior CBECS surveys.

319

China Energy and Emissions Paths to 2030  

E-Print Network [OSTI]

World Best Practice Energy Intensity Values for Selected20 Figure 16. Office Buildings Energy Intensity by End-Projected Technology and Energy Intensity Trends in Cement

Fridley, David

2012-01-01T23:59:59.000Z

320

Content of System Design Descriptions  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-3024-2011 August 2011 ________________________ Superseding DOE-STD-3024-98 DOE STANDARD CONTENT OF SYSTEM DESIGN DESCRIPTIONS U.S. Department of Energy AREA EDCO Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-3024-2011 ii Available on the Department of Energy Technical Standards web page at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-3024-2011 iii CONTENTS PAGE Foreword ..................................................................................................................................................... iv 1. PURPOSE ............................................................................................................................................1

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

China's Top-1000 Energy-Consuming Enterprises Program: Reducing Energy Consumption of the 1000 Largest Industrial Enterprises in China  

E-Print Network [OSTI]

World Best Practice Energy Intensity Values for SelectedChina’s Target for Energy Intensity Reduction in 2010: Angoal of reducing energy intensity, defined as energy

Price, Lynn

2008-01-01T23:59:59.000Z

322

Summary of Information and Resources Related to Energy Use in Healthcare Facilities - Version 1  

E-Print Network [OSTI]

Figure 3. Estimated site energy intensity and floor space of4. Estimated source energy intensity of selected Californiasite energy and energy intensity (energy use per square foot

Singer, Brett C.

2010-01-01T23:59:59.000Z

323

GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.  

SciTech Connect (OSTI)

THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

2002-05-31T23:59:59.000Z

324

Quantifying Regional Economic Impacts of CO2 Intensity Targets in China  

E-Print Network [OSTI]

To address rising energy use and CO2 emissions, China’s leadership has enacted energy and CO2 intensity

Zhang, Da

2012-09-01T23:59:59.000Z

325

Descriptive Model of Generic WAMS  

SciTech Connect (OSTI)

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Hauer, John F.; DeSteese, John G.

2007-06-01T23:59:59.000Z

326

Residential Energy Consumption Survey Results: Total Energy Consumption,  

Open Energy Info (EERE)

Survey Results: Total Energy Consumption, Survey Results: Total Energy Consumption, Expenditures, and Intensities (2005) Dataset Summary Description The Residential Energy Consumption Survey (RECS) is a national survey that collects residential energy-related data. The 2005 survey collected data from 4,381 households in housing units statistically selected to represent the 111.1 million housing units in the U.S. Data were obtained from residential energy suppliers for each unit in the sample to produce the Consumption & Expenditures data. The Consumption & Expenditures and Intensities data is divided into two parts: Part 1 provides energy consumption and expenditures by census region, population density, climate zone, type of housing unit, year of construction and ownership status; Part 2 provides the same data according to household size, income category, race and age. The next update to the RECS survey (2009 data) will be available in 2011.

327

NASA Academy Program Descriptions  

E-Print Network [OSTI]

NASA Academy Program Descriptions October 2010 #12;NASA Academy Program Descriptions 2011 October 11, 2010 1/5 NASA Academy at ARC, GRC, GSFC, and MSFC Websites: Ames: http://academy.arc.nasa.gov Glenn: http://academy.grc.nasa.gov Goddard: http://academy.gsfc.nasa.gov Marshall: http://academy.msfc.nasa

Wang, Z. Jane

328

Marketing Plan Company Description  

E-Print Network [OSTI]

Marketing Plan Company Description: Consumer company that provides a product to helps boost Marketing Swat Team Project Description and Deliverables: The team will Identify the best online vehicles of promotions from YouTube celebs, co- marketing with related businesses, affiliate marketing, cross marketing

Dahl, David B.

329

Forest Landscape Description and  

E-Print Network [OSTI]

Forest Landscape Description and Inventories a basis for landplanning and design Pacific Southwest landscape description and inventories ­ a basis for land plan- ning and design. Berkeley, Calif., Pacific SW. Illustrates their application in two inventories made to aid managers and landscape architects in planning

Standiford, Richard B.

330

Light intensity compressor  

DOE Patents [OSTI]

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

331

Quality Assurance Requirements and Description  

Broader source: Energy.gov (indexed) [DOE]

QjCivilianRadioactive QjCivilianRadioactive Was'fe Management QA: QA QVALITY ASSURANCE REQUIREMENTS AND DESCRIPTION DOEIRW-0333P Revisiol1 20 Effective Date: 10-01-2008 LarrY Newman, DlrectQr Office of Quality As,surance ~~--~-_._._- Edward F. Spr at III, Di or Office of Civilian Radioactive Waste Management Date I/Jf/4t' , . - - - Date OCRWM Title: Quality Assurance Requirements and Description DOEIRW-0333P, Revision 20 Office of Civilian Radioactive Waste Management Quality Assurance Policy Page: 2 of 160 Successful implementation of the Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance (QA) program is essential for the OCRWM to carry out its mission. Our mission is to manage and dispose ofbigh-Ievel radioactive waste and spent nuclear fuel in a manner that protects health, safety, and the environment; enhances national and energy security; and merits

332

Neutral particle beam intensity controller  

DOE Patents [OSTI]

A neutral beam intensity controller is provided for a neutral beam generator in which a neutral beam is established by accelerating ions from an ion source into a gas neutralizer. An amplitude modulated, rotating magnetic field is applied to the accelerated ion beam in the gas neutralizer to defocus the resultant neutral beam in a controlled manner to achieve intensity control of the neutral beam along the beam axis at constant beam energy. The rotating magnetic field alters the orbits of ions in the gas neutralizer before they are neutralized, thereby controlling the fraction of neutral particles transmitted out of the neutralizer along the central beam axis to a fusion device or the like. The altered path or defocused neutral particles are sprayed onto an actively cooled beam dump disposed perpendicular to the neutral beam axis and having a central open for passage of the focused beam at the central axis of the beamline. Virtually zero therough 100% intensity control is achieved by varying the magnetic field strength without altering the ion source beam intensity or its species yield.

Dagenhart, William K. (Oak Ridge, TN)

1986-01-01T23:59:59.000Z

333

Effect of adaptation to high light intensity on the kinetics of energy transfer from phycobilisomes to photosystem II in Anabaena cylindrica  

Science Journals Connector (OSTI)

Transfer efficiencies between phycobilisomes and photosystem II antenna chlorophylls were determined on membrane fragments isolated from low and high light adapted Anabaena cells. The observed increase in energy ...

E. Kaiseva; L. Zimányi; I. Laczkó

1988-12-01T23:59:59.000Z

334

Hospital Energy Benchmarking Guidance - Version 1.0  

E-Print Network [OSTI]

ventilation site energy intensity of California hospitalsSep-2009 Lighting site energy intensity for all Californiafor lighting site energy intensity of California nursing

Singer, Brett C.

2010-01-01T23:59:59.000Z

335

Sectoral trends in global energy use and greenhouse gas emissions  

E-Print Network [OSTI]

A1 scenario forecasts GDP energy intensity to continue toby activity levels and the energy intensity of the specificDemand Activity x Energy Intensity Additional information on

2006-01-01T23:59:59.000Z

336

Energy Use in China: Sectoral Trends and Future Outlook  

E-Print Network [OSTI]

J. , 2001. “Changing Energy Intensity in Chinese Industry”,M. ,1994. “Changing Energy Intensity in Chinese Industry”,2006. Indicators of Energy Intensity in the Unites States,

2008-01-01T23:59:59.000Z

337

China's Energy and Carbon Emissions Outlook to 2050  

E-Print Network [OSTI]

11 Figure 9 Retail Buildings Energy Intensity by End-12 Figure 10 Office Buildings Energy Intensity by End-Energy Intensity

Zhou, Nan

2011-01-01T23:59:59.000Z

338

Projections of Full-Fuel-Cycle Energy and Emissions Metrics  

E-Print Network [OSTI]

function of the FFC energy intensity parameters. The FFCand c as the energy intensity of fuel production, defined asrepresenting the energy intensity and material losses at

Coughlin, Katie

2013-01-01T23:59:59.000Z

339

Drivers of Future Energy Demand  

Gasoline and Diesel Fuel Update (EIA)

trends - Household income migration urbanization * Policy: China Energy Outlook - Air pollution - Climate change 4 (1) Industrial energy intensity: The energy intensity of...

340

China Energy and Emissions Paths to 2030  

E-Print Network [OSTI]

world best practice energy intensity (weighted by current productionworld’s best practice energy intensity in all major industrial productionenergy intensity for ammonia production lags behind the world

Fridley, David

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Description urse deals w  

E-Print Network [OSTI]

H Place: O Meeting Tentativ W L o L W L M L Description urse deals w g offshore r seamounts, animal ecology. Plant-animal interactions in the shallow subtidal zone. Lab & Field Work: Community analysis

342

B Plant facility description  

SciTech Connect (OSTI)

Buildings 225B, 272B, 282B, 282BA, and 294B were removed from the B Plant facility description. Minor corrections were made for tank sizes and hazardous and toxic inventories.

Chalk, S.E.

1996-10-04T23:59:59.000Z

343

Neutrino physics with an intense \  

E-Print Network [OSTI]

We study some of the physics potential of an intense $1\\,\\mathrm{MCi}$ $^{51}\\mathrm{Cr}$ source combined with the {\\sc Majorana Demonstrator} enriched germanium detector array. The {\\sc Demonstrator} will consist of detectors with ultra-low radioactive backgrounds and extremely low energy thresholds of~$\\sim 400\\,\\mathrm{eV}$. We show that it can improve the current limit on the neutrino magnetic dipole moment. We briefly discuss physics applications of the charged-current reaction of the $^{51}\\mathrm{Cr} neutrino with the $^{73}\\mathrm{Ge} isotope. Finally, we argue that the rate from a realistic, intense tritium source is below the detectable limit of even a tonne-scale HPGe experiment

R. Henning

2010-11-16T23:59:59.000Z

344

The Intense Radiation Gas  

E-Print Network [OSTI]

We present a new dispersion relation for photons that are nonlinearly interacting with a radiation gas of arbitrary intensity due to photon-photon scattering. It is found that the photon phase velocity decreases with increasing radiation intensity, it and attains a minimum value in the limit of super-intense fields. By using Hamilton's ray equations, a self-consistent kinetic theory for interacting photons is formulated. The interaction between an electromagnetic pulse and the radiation gas is shown to produce pulse self-compression and nonlinear saturation. Implications of our new results are discussed.

M. Marklund; P. K. Shukla; B. Eliasson

2005-03-08T23:59:59.000Z

345

Energy Audit Practices in China: National and Local Experiences and Issues  

E-Print Network [OSTI]

and Evaluation of Energy Intensity per GDP Indicators (???and Evaluation of Energy Intensity Reduction and Pollutionto improve its energy intensity. In China, industrial energy

Shen, Bo

2011-01-01T23:59:59.000Z

346

The Reality and Future Scenarios of Commercial Building Energy Consumption in China  

E-Print Network [OSTI]

for a reduction of energy intensity by 2010, whether and howbuildings; (3) energy intensity (particularly electricity)commercial building, energy intensity, energy efficiency,

Zhou, Nan

2008-01-01T23:59:59.000Z

347

RESFEN5: Program Description  

E-Print Network [OSTI]

Total: The annual total energy consumption for the entireTotal: The annual total energy consumption for the entirecalculation the total annual energy consumption for the

Mitchell, Robin

2008-01-01T23:59:59.000Z

348

Efficiency and Intensity in the AEO 2010  

U.S. Energy Information Administration (EIA) Indexed Site

Session 9 Session 9 Energy Efficiency: Measuring Gains and Quantifying Opportunities April 7, 2010 2010 Energy Conference Washington, DC Steve Wade, Economist Efficiency and Intensity in the AEO 2010 Steve Wade, 2010 Energy Conference, April 7, 2010 2 * What are the sources of efficiency in the AEO 2010? * What is the contribution of energy efficiency to projected U.S. energy intensity? * How do AEO scenarios relate to technical potential? Overview Steve Wade, 2010 Energy Conference, April 7, 2010 3 * Technology - Stock turnover - Progress and learning * Mandates - CAFÉ, efficiency standards (NAECA, EPACT), building codes... - Renewable fuel standards * Incentives - Tax credits, loan guarantees, grants, ...  Energy efficiency and renewables - ACESA, ARRA (stimulus bill) ...  Investment tax credits

349

Hydrodynamic Description of Protein Folding  

Science Journals Connector (OSTI)

A hydrodynamic description of protein folding is proposed and illustrated with a lattice protein model, which has a free energy surface (FES) typical of proteins with two-state folding kinetics. The flows from the unfolded to the native state are concentrated in a limited region of the FES. The rest is occupied by a flow “vortex”, which does not lead to the native state. In contrast with intermediates that are associated with local minima, the vortex is not visible on the FES. The hydrodynamic interpretation thus provides new insights into the mechanism of protein folding and can be a useful complement to standard analyses.

Sergei F. Chekmarev; Andrey Yu. Palyanov; Martin Karplus

2008-01-11T23:59:59.000Z

350

Energy conservation in citrus processing. Final project report  

SciTech Connect (OSTI)

Alternative energy conserving systems for use in citrus processing plants were synthesized and evaluated in terms of energy savings and economic return. The energy intensive operations that are carried out in citrus processing plants include conveying and extraction, concentration, peel drying, refrigeration, and pasteurization. The alternative energy conserving systems are synthesized from components and subsystems that are arranged to make use of energy cascading and thermodynamic regeneration to reduce the overall energy usage. System requirements such as air pollution rules and plant processing load cycles, a characterization of major operations, description of alternative system concepts, and the evaluation of alternative systems in terms of economic parameters and energy usage are identified.

Leo, M.A.; Lari, R.I.; Moore, N.R.; Broussard, M.R.; Gyamfi, M.

1981-11-01T23:59:59.000Z

351

Tidal Energy | Open Energy Information  

Open Energy Info (EERE)

Add description List of Tidal Energy Incentives Retrieved from "http:en.openei.orgwindex.php?titleTidalEnergy&oldid267201" Category: Articles with outstanding TODO tasks...

352

Electric dipole-forbidden nuclear transitions driven by super-intense laser fields  

E-Print Network [OSTI]

Electric dipole-forbidden transitions of nuclei interacting with super-intense laser fields are investigated considering stable isotopes with suitable low-lying first excited states. Different classes of transitions are identified, and all magnetic sublevels corresponding to the near-resonantly driven nuclear transition are included in the description of the nuclear quantum system. We find that large transition matrix elements and convenient resonance energies qualify nuclear M1 transitions as good candidates for the coherent driving of nuclei. We discuss the implications of resonant interaction of intense laser fields with nuclei beyond the dipole approximation for the controlled preparation of excited nuclear states and important aspects of possible experiments aimed at observing these effects.

Adriana Pálffy; Jörg Evers; Christoph H. Keitel

2008-04-14T23:59:59.000Z

353

Electric-dipole-forbidden nuclear transitions driven by super-intense laser fields  

Science Journals Connector (OSTI)

Electric-dipole-forbidden transitions of nuclei interacting with super-intense laser fields are investigated by considering stable isotopes with suitable low-lying first excited states. Different classes of transitions are identified, and all magnetic sublevels corresponding to the near-resonantly driven nuclear transition are included in the description of the nuclear quantum system. We find that large transition matrix elements and convenient resonance energies qualify nuclear M1 transitions as good candidates for the coherent driving of nuclei. We discuss the implications of resonant interaction of intense laser fields with nuclei beyond the dipole approximation for the controlled preparation of excited nuclear states and important aspects of possible experiments aimed at observing these effects.

Adriana Pálffy, Jörg Evers, and Christoph H. Keitel

2008-04-11T23:59:59.000Z

354

Energy Analysis by Sector | Department of Energy  

Office of Environmental Management (EM)

Energy Analysis by Sector Energy Analysis by Sector Manufacturers often rely on energy-intensive technologies and processes. AMO conducts a range of analyses to explore energy use...

355

Buildings Energy Data Book  

Buildings Energy Data Book [EERE]

3.1 Commercial Sector Energy Consumption 3.1 Commercial Sector Energy Consumption 3.2 Commercial Sector Characteristics 3.3 Commercial Sector Expenditures 3.4 Commercial Environmental Emissions 3.5 Commercial Builders and Construction 3.6 Office Building Markets and Companies 3.7 Retail Markets and Companies 3.8 Hospitals and Medical Facilities 3.9 Educational Facilities 3.10 Hotels/Motels 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables Chapter 3 focuses on energy use in the commercial sector. Section 3.1 covers primary and site energy consumption in commercial buildings, as well as the delivered energy intensities of various building types and end uses. Section 3.2 provides data on various characteristics of the commercial sector, including floorspace, building types, ownership, and lifetimes. Section 3.3 provides data on commercial building expenditures, including energy prices. Section 3.4 covers environmental emissions from the commercial sector. Section 3.5 briefly addresses commercial building construction and retrofits. Sections 3.6, 3.7, 3.8, 3.9, and 3.10 provide details on select commercial buildings types, specifically office and retail space, medical facilities, educational facilities, and hotels and motels.

356

A high-intensity, pulsed supersonii:, carbon source aivith C("Pi> kinetic energies of 0.08-0.7 eV for crossed beam experiments  

E-Print Network [OSTI]

. INTRODUCTION Chemical reactions of ground state atomic carbon C(3Pj) play a major role in combustion processes,`-3 hydrocarbon syntheses,lm3 and interstellar chemistry."-* However, pre- dominantly energy sources.2*14**5 Heating of (1) and (2) releases nitrogen, hydrogen chloride, and atomic carbon (1

Kaiser, Ralf I.

357

Learning to Apply Metrology Principles to the Measurement of X-ray Intensities in the 500 eV to 110 keV Energy Range  

SciTech Connect (OSTI)

National Security Technologies, LLC (NSTec), Livermore Operations, has two optical radiation calibration laboratories accredited by “the National Voluntary Laboratories Accreditation Program (NVLAP) which is the accrediting body of” the National Institute of Standards and Technology (NIST), and is now working towards accreditation for its X-ray laboratories. NSTec operates several laboratories with X-ray sources that generate X-rays in the energy range from 50 eV to 115 keV. These X-ray sources are used to characterize and calibrate diagnostics and diagnostic components used by the various national laboratories, particularly for plasma analysis on the Lawrence Livermore National Laboratory (LLNL) National Ignition Facility (NIF). Because X-ray photon flux measurement methods that can be accredited, i.e., traceable to NIST, have not been developed for sources operating in these energy ranges, NSTec, NIST, and the National Voluntary Accreditation Program (NVLAP) together have defined a path toward the development and validation of accredited metrology methods for X-ray energies. The methodology developed for the high energy X-ray (HEX) Laboratory was NSTec’s starting point for X-ray metrology accreditation and will be the basis for the accredited processes in the other X-ray laboratories. This paper will serve as a teaching tool, by way of this example using the NSTec X-ray sources, for the process and methods used in developing an accredited traceable metrology.

Haugh, M. J.; Pond, T.; Silbernagel, C.; Torres, P.; Marlett, K.; Goldin, F.; Cyr, S.

2011-02-08T23:59:59.000Z

358

University Location Project Description  

Broader source: Energy.gov (indexed) [DOE]

Location Project Description Location Project Description Boise State University Boise, Idaho Boise State University has undertaken a study of the structural setting and geothermal potential at Neal Hot Springs that will integrate geology, geochemistry, and geophysics to analyze the site on the western Snake River plain. Boise State will determine if Neal Hot Springs sustains the necessary rock dilation and conduit pathways for hydrothermal fluid flow and successful geothermal development. The result will be new data acquisition, including a deep geophysical survey and fault surface data. Colorado School of Mines Golden, Colorado Colorado School of Mines will conduct an investigation near Homedale, Idaho, an area that straddles volcanic rock and unconsolidated sediments.

359

CRAC2 model description  

SciTech Connect (OSTI)

The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions.

Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

1984-03-01T23:59:59.000Z

360

the microscopic description  

E-Print Network [OSTI]

at the Bragg peak Penetration Energy Stopping power dE/dx Electronic stopping Nuclear stopping Insulator gap How is energy deposited (ions...) Water Relativedose(%) Depth (mm) Energy Dose and dosimetry Energy electronic stopping Low Energy nuclear stopping Direct DNA ionization (photons, electron impact

Giraud, Olivier

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Le Bail Intensity Extraction  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Le Bail Intensity Extraction Le Bail Intensity Extraction Presentation Goal Introduce the concepts behind LeBail fitting; why it is useful and how to perform a Le Bail fit with GSAS. Format: PDF slides or a RealPlayer video of the slides with accompanying audio and a demo video that shows how a Le Bail fit is performed. Presentation Outline What is the Le Bail method? Other approaches Why use the Le Bail method? Parameter fitting with Le Bail intensity extraction Le Bail refinement strategies Avoiding problems with background fitting: BKGEDIT Demo: an example Le Bail fit Links Le Bail lecture Slides (as PDF file) FlashMovie presentation with index (best viewed with 1024x768 or better screen resolution) FlashMovie file (800x600 pixels) Le Bail demo FlashMovie presentation with index (best viewed with 1024x768 or

362

Rijksuniversiteit Groningen Description  

E-Print Network [OSTI]

Rijksuniversiteit Groningen Description Founded in 1614, the University of Groningen enjoys in the north of the Netherlands, Groningen is an ideal, safe student city with a flourishing student life of Groningen is not a campus University and therefore students have to find their own accommodation in town

Bristol, University of

363

Student Ambassador Job description  

E-Print Network [OSTI]

Blue 1 Student Ambassador Job description Department: Student Administration and Registry Location: Varies - as advised by the UK Student Recruitment and Outreach Team Job title: Student Ambassador Responsible to: UK Student Recruitment and Outreach Team Payment and benefits: £6.42 per hour Duration

Anderson, Jim

364

Home Workspace Field Description  

E-Print Network [OSTI]

Proposal Management Reviewer Home Workspace Field Description Last updated: 4/1/2013 1 of 2 http://eresearch.umich.edu Proposal Management Reviewer Home Workspace Your Home Workspace is your launch pad for eResearch Proposal to the project. Who Can See the Reviewer Home Workspace: People with Reviewer or Reviewer Who Can Sign access

Shyy, Wei

365

Policy Options for Encouraging Energy Efficiency Best Practices in Shandong Province's Cement Industry  

E-Print Network [OSTI]

12 Figure 7 Total energy consumption and energy intensity ofonly data on total energy consumption or energy intensitytce) Figure 7 Total energy consumption and energy intensity

Price, Lynn

2013-01-01T23:59:59.000Z

366

RCPO1 - A Monte Carlo program for solving neutron and photon transport problems in three dimensional geometry with detailed energy description and depletion capability  

SciTech Connect (OSTI)

The RCP01 Monte Carlo program is used to analyze many geometries of interest in nuclear design and analysis of light water moderated reactors such as the core in its pressure vessel with complex piping arrangement, fuel storage arrays, shipping and container arrangements, and neutron detector configurations. Written in FORTRAN and in use on a variety of computers, it is capable of estimating steady state neutron or photon reaction rates and neutron multiplication factors. The energy range covered in neutron calculations is that relevant to the fission process and subsequent slowing-down and thermalization, i.e., 20 MeV to 0 eV. The same energy range is covered for photon calculations.

Ondis, L.A., II; Tyburski, L.J.; Moskowitz, B.S.

2000-03-01T23:59:59.000Z

367

Semi-classical Characters and Optical Model Description of Heavy Ion Scattering, Direct Reactions, and Fusion at Near-barrier Energies  

E-Print Network [OSTI]

An approach is proposed to calculate the direct reaction (DR) and fusion probabilities for heavy ion collisions at near-Coulomb-barrier energies as functions of the distance of closest approach D within the framework of the optical model that introduces two types of imaginary potentials, DR and fusion. The probabilities are calculated by using partial DR and fusion cross sections, together with the classical relations associated with the Coulomb trajectory. Such an approach makes it possible to analyze the data for angular distributions of the inclusive DR cross section, facilitating the determination of the radius parameters of the imaginary DR potential in a less ambiguous manner. Simultaneous $\\chi^{2}$-analyses are performed of relevant data for the $^{16}$O+$^{208}$Pb system near the Coulomb-barrier energy.

B. T. Kim; W. Y. So; S. W. Hong; T. Udagawa

2001-11-02T23:59:59.000Z

368

California's Water Energy Relationship  

E-Print Network [OSTI]

.........................................................................................................................7 THE ENERGY INTENSITY OF THE WATER USE CYCLE.........................................................................................9 ENERGY INTENSITY IN NORTHERN AND SOUTHERN CALIFORNIA1 CALIFORNIA ENERGY COMMISSION California's Water ­ Energy Relationship Prepared in Support

369

To the low-temperature technologies methodology: the clean superconductor free energy fluctuations calculation in the micro- and macrostructures descriptions of superconductor  

E-Print Network [OSTI]

The Ginzburg - Landau theory is used for the superconducting structures free energy fluctuations study. On its basis, we have defined the value of the heat capacity jump in the macroscopic zero-dimensional sample and in the zero-dimensional microstructures ensemble of the total volume equal to the macroscopic sample volume. The inference is made that in the Ginzburg - Landau methodology frameworks, it is essential to take into account the superconducting clean sample effective dimensionality only on the last stage of its thermodynamical characteristics calculation.

Tolbatov, Iogann

2009-01-01T23:59:59.000Z

370

To the low-temperature technologies methodology: the clean superconductor free energy fluctuations calculation in the micro- and macrostructures descriptions of superconductor  

E-Print Network [OSTI]

The Ginzburg - Landau theory is used for the superconducting structures free energy fluctuations study. On its basis, we have defined the value of the heat capacity jump in the macroscopic zero-dimensional sample and in the zero-dimensional microstructures ensemble of the total volume equal to the macroscopic sample volume. The inference is made that in the Ginzburg - Landau methodology frameworks, it is essential to take into account the superconducting clean sample effective dimensionality only on the last stage of its thermodynamical characteristics calculation.

Iogann Tolbatov

2009-10-24T23:59:59.000Z

371

EES 110: Earth Systems Course Description  

E-Print Network [OSTI]

of energy come from? The course includes laboratory exercises that cover map reading skills, rockEES 110: Earth Systems Course Description: This course examines some of the basic processes (held during normal laboratory meeting times): 1. Rocks & Minerals of Upstate SC: A chance to explore

372

NAICS Codes Description:  

Broader source: Energy.gov (indexed) [DOE]

Codes Codes Description: Filters: Date Signed only show values between '10/01/2006' and '09/30/2007', Contracting Agency ID show only ('8900'), Contracting Office ID show only ('00001') Contracting Agency ID: 8900, Contracting Office ID: 00001 NAICS Code NAICS Description Actions Action Obligation 541519 OTHER COMPUTER RELATED SERVICES 251 $164,546,671 541611 ADMINISTRATIVE MANAGEMENT AND GENERAL MANAGEMENT CONSULTING SERVICES 236 $52,396,806 514210 DATA PROCESSING SERVICES 195 $28,941,727 531210 OFFICES OF REAL ESTATE AGENTS AND BROKERS 190 $6,460,652 541330 ENGINEERING SERVICES 165 $33,006,079 163 $11,515,387 541690 OTHER SCIENTIFIC AND TECHNICAL CONSULTING SERVICES 92 $40,527,088 531390 OTHER ACTIVITIES RELATED TO REAL ESTATE 79 -$659,654 337214 OFFICE FURNITURE (EXCEPT WOOD) MANUFACTURING 78 $1,651,732

373

Proposal Review Panel Descriptions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Proposal Review Panel Descriptions Proposal Review Panel Descriptions To ensure competent scientific review, a proposal may be assigned to a different panel (at the discretion of the Review Panel Chair), or the panel may seek additional ad hoc reviews from other experts. High-Pressure This panel reviews scattering and diffraction proposals that focus on materials at high pressure. Techniques such as (but not limited to) diffraction, nuclear resonant scattering, and inelastic x-ray scattering for materials at high pressure are appropriate for this panel to consider. Instrumentation This panel reviews proposals related to the development of beamline instrumentation, sample environments, x-ray optical components, and/or detectors that are relevant to synchrotron radiation research. This panel

374

The Bioenergetic Description of Light Energy Migration in Photoactive Membranes; Equivalence between the Theory of the Energy Fluxes and the Theory of the Proportion of Pigments Forms to Total Pigments  

Science Journals Connector (OSTI)

The energy exchanges between pigments in biological membranes irradiated with light can be described in a number of ... , is equivalent to the theory of the energy exchange fluxes developed by Strasser (1978). .....

C. Sironval; R. Strasser; M. Brouers

1984-01-01T23:59:59.000Z

375

How Can China Lighten Up? Urbanization, Industrialization and Energy Demand Scenarios  

E-Print Network [OSTI]

2007. 27 3.2.3 Energy Intensity and Fuel Mix As a result ofEnergy Intensity and Fuel Mix Energy Intensity and Fuel Mix

Aden, Nathaniel T.

2010-01-01T23:59:59.000Z

376

Potential Energy Savings and CO2 Emissions Reduction of China's Cement Industry  

E-Print Network [OSTI]

World Best Practice Energy Intensity Values for Selectedworld-best-practice-energy-intensity-values-selected-One main reason for the energy intensity reduction in recent

Ke, Jing

2013-01-01T23:59:59.000Z

377

Electronic energy-level structure, correlation crystal-field effects, and f-f transition intensities of Er{sup 3+} in Cs{sub 3}Lu{sub 2}Cl{sub 9}  

SciTech Connect (OSTI)

Single crystals of 1{percent} Er{sup 3+}-doped Cs{sub 3}Lu{sub 2}Cl{sub 9} were grown using the Bridgman technique. From highly resolved polarized absorption spectra measured at 10 and 16 K, and upconversion luminescence and excitation spectra measured at 4.2 K, 114 crystal-field levels from 27 {sup 2S+1}L{sub J}(4f{sup 11}) multiplets of Er{sup 3+} were assigned. 111 of these were used for a semiempirical computational analysis. A Hamiltonian including only electrostatic, spin-orbit, and one-particle crystal-field interactions (C{sub 3v}) yielded a root-mean-square standard deviation of 159.8thinspcm{sup {minus}1} and could not adequately reproduce the experimental crystal-field energies. The additional inclusion of two- and three-body atomic interactions, giving a Hamiltonian with 16 atomic and 6 crystal-field parameters, greatly reduced the rms standard deviation to 22.75thinspcm{sup {minus}1}. The further inclusion of the correlation crystal-field interaction {cflx g}{sub 10A}{sup 4} again lowered the rms standard deviation to a final value of 17.98thinspcm{sup {minus}1} and provided substantial improvement in the calculated crystal-field splittings of mainly the J=9/2 or J=11/2 multiplets. However, the calculated baricenter energies of some excited-state multiplets deviate from their respective experimental values, and improvements in the atomic part of the effective Hamiltonian are required to correct this deficiency of the model. On the basis of the calculated electronic wave functions, the 12 electric-dipole intensity parameters (C{sub 3v}) of the total transition dipole strength were obtained from a fit to 95 experimental crystal-field transition intensities. The overall agreement between experimental and calculated intensities is fair. The discrepancies are most likely a result of using the approximate C{sub 3v} rather than the actual C{sub 3} point symmetry of Er{sup 3+} in Cs{sub 3}Lu{sub 2}Cl{sub 9} in the calculations. {copyright} {ital 1998} {ital The American Physical Society}

Luethi, S.R.; Guedel, H.U. [Departement fuer Chemie und Biochemie, Universitaet Bern, Freiestrasse 3, CH-3000 Bern 9 (Switzerland)] [Departement fuer Chemie und Biochemie, Universitaet Bern, Freiestrasse 3, CH-3000 Bern 9 (Switzerland); Hehlen, M.P. [Optical Sciences Laboratory, The University of Michigan, 1301 Beal Avenue, Ann Arbor, Michigan 48109-2122 (United States)] [Optical Sciences Laboratory, The University of Michigan, 1301 Beal Avenue, Ann Arbor, Michigan 48109-2122 (United States); Quagliano, J.R. [Chemical Science and Technology Division, Los Alamos National Laboratory, Mail stop E543, Los Alamos, New Mexico 87545 (United States)] [Chemical Science and Technology Division, Los Alamos National Laboratory, Mail stop E543, Los Alamos, New Mexico 87545 (United States)

1998-06-01T23:59:59.000Z

378

The intensity of motivation  

E-Print Network [OSTI]

rearranged before they were repeated in reverse sequence. Electrocardiographic T-wave amplitude (TWA) and changes were monitored during a 15-sec anticipatory phase, as well as during each 15-second mental manipulation phase. (This ensured that the measures..., and the subject was surreptitiously observed. The high-self-esteem subjects were observed to do more practice www.annualreviews.org/aronline Annual Reviews INTENSITY OF MOTIVATION 121 problems for the difficult- than for the easy-to-please experimenter...

Brehm, Jack W.; Self, E. A.

1989-01-01T23:59:59.000Z

379

Clean Energy Manufacturing Initiative Industrial Efficiency and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Industrial Efficiency and Energy Productivity Video Clean Energy Manufacturing Initiative Industrial Efficiency and Energy Productivity Video Addthis Description Industrial...

380

Future High-Intensity Proton Accelerators  

E-Print Network [OSTI]

This paper provides an overview of currently planned high-intensity proton accelerators. While for high energies (>10GeV) synchrotrons remain the preferred tools to produce high-intensity beams, recent years have seen an impressive development of linac-based lower-energy (intensity proton drivers for spallation sources, accelerator driven systems (ADS), production of Radioactive Ion Beams (RIB) and various neutrino applications (beta-beam, superbeam, neutrino factory). This paper discusses the optimum machine types for the various beam requirements and uses a range of projects, which are likely to be realised within the coming decade, to illustrate the different approaches to reach high average beam power with the application-specific time structure. Only machines with a beam power above 100kW are considered.

Gerigk, F

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Estimated Cost Description Determination Date:  

Broader source: Energy.gov (indexed) [DOE]

and posted 2/10/2011 and posted 2/10/2011 *Title, Location Estimated Cost Description Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain $50,000 FONSI: uncertain Determination Date: uncertain Transmittal to State: uncertain EA Approval: uncertain FONSI: uncertain Total Estimated Cost $70,000 Attachment: Memo, Moody to Marcinowski, III, SUBJECT: NEPA 2011 APS for DOE-SRS, Dated: Annual NEPA Planning Summary Environmental Assessments (EAs) Expected to be Initiated in the Next 12 Months Department of Energy (DOE) Savannah River Site (SRS) Jan-11 Estimated Schedule (**NEPA Milestones) South Carolina Department of Health and Environmental Control (SCDHEC) issued a National Pollutant Discharge Elimination System (NPDES) Industrial Stormwater General Permit (IGP) # SCR000000 November 12, with an effective date of January

382

Energy Performance Indicator | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

managers establish a normalized baseline of energy consumption, track annual progress of intensity improvements, energy savings, Superior Energy Performance (SEP) EnPIs, and other...

383

EIA - Annual Energy Outlook 2011 Early Release  

Gasoline and Diesel Fuel Update (EIA)

Energy Prices Energy Consumption by Sector Energy Consumption by Primary Fuel Energy Intensity Energy Production and Imports Electricity Generation Energy-Related Carbon Dioxide...

384

China Energy and Emissions Paths to 2030  

E-Print Network [OSTI]

63 Figure 59. Carbon Intensity of Power Generation,economic energy and carbon intensity by setting short andproduction) and carbon intensity (CO 2 emissions per unit of

Fridley, David

2012-01-01T23:59:59.000Z

385

RESFEN5: Program Description  

E-Print Network [OSTI]

kWh/m 2 - year (SI), for HeatPump. Cooling energy attributedor kWh/year (IP and SI) for HeatPump. Cooling Energy HeatingIP). or kW (IP and SI) for HeatPump. Cooling peak attributed

Mitchell, Robin

2008-01-01T23:59:59.000Z

386

High intensity femtosecond enhancement cavities  

E-Print Network [OSTI]

To produce extreme ultraviolet radiation via high harmonic generation (HHG) in rare gases, light intensities in excess of 1014 W/cm 2 are required. Usually such high intensity are obtained by parametric amplification of ...

Abram, Gilberto

2009-01-01T23:59:59.000Z

387

Description of isoscalar giant dipole resonance in nuclei  

E-Print Network [OSTI]

collective and microscopic transition densities. Possible underestimations of the energy weighted sum rule for the case of the ISGDR are reported. An alternative description for the ISGDR in nuclei based on the Fermi liquid drop model (FLDM...

Pochivalov, Oleksiy Grigorievich

2009-05-15T23:59:59.000Z

388

Project Name/Description  

Broader source: Energy.gov (indexed) [DOE]

RCA CM-3 Risk Management RCA CM-3 Risk Management Projects/Programs - RMPs, Tools, and SMEs Project Name/Description (see note below) DOE Program DOE RMP Contractor RMP Combined RMP Tools Database/Risk Analysis SMEs Federal/M&O/Consultant Integrated Biorefinery Research Facility Project EE X Research Support Facility Project EE X National Synchrotron Light Source II Project SC X 12 GeV Upgrade Project (TJL) SC X Physical Sciences Facility Project (PNNL) SC X P6, Pertmaster, Excel Mike Shay, Jason Gatelum ITER SC X (internation al pgm) P6, Pertmaster, Risk Checklist, Risk Assessor Handbook John Tapia, Colin Williams, Allen Bishop SING & SING II (SNS, OR) SC X Excel, Analytic Hierarchy, P6 Barbara Thibadeau Modernization of Lab Fac. (ORNL)

389

Description of Proposed Action  

Broader source: Energy.gov (indexed) [DOE]

Carlsbad Field Office Carlsbad Field Office RECORD OF CATEGORICAL EXCLUSION DETERMINATION 1 Description of Proposed Action Performance of a three-dimensional seismic survey line on approximately 2,409 acres contained within the WIPP Land Withdrawal Area as part of a larger survey to determine whether hydrocarbons are present in the region in quantities that warrant extraction and development. Number and Title of Applicable Categorical Exclusion B3.1 Site Characterization/Environmental Monitoring Activities covered by this Categorical Exclusion include, but are not limited to, site characterization and environmental monitoring under CERCLA and RCRA. Specific activities include, but are not limited to: (a) Geological, geophysical (such as gravity, magnetic, electrical, seismic, and radar), geochemical, and

390

Methodology of Energy Intensities - Appendix A  

U.S. Energy Information Administration (EIA) Indexed Site

buyer and the seller. A spot market is more likely to develop at a location with numerous pipeline interconnections, thus allowing for a large number of buyers and sellers. The...

391

Waste Description Pounds Reduced,  

E-Print Network [OSTI]

/A Greenhouse gas N/A $3,415 $5,386 Installation of motion detector and IR lighting in in labs in Bldg 535 Water and energy required to run the still. Motion sensors for labs* Energy conservation N/A Greenhouse gas N/A $4,320 $5,817 Installation of motion detector lighting in common areas of Buildings 490 and 463. "Bio Circle

392

Detailed Course Module Description | Department of Energy  

Energy Savers [EERE]

lists the course modules for building science courses offered at Cornell's Collaborator Sustainable Buildingi Practice course. coursemodule.pdf More Documents & Publications...

393

Energygrams: brief descriptions of energy technology  

SciTech Connect (OSTI)

The Technical Information Center routinely screens all DOE R and D reports to identify appropriate information. It also coordinates with DOE and DOE laboratory and contractor program managers in identifying research and development projects for the transfer program and in reviewing the technical content of Energygrams before publication. Energygrams are usually one-page illustrated bulletins describing DOE technology or data and telling how to obtain the technical reports, patent documents, software or other material on which they are based. The compilation is organized by subject categories, and within each category, Energygrams are presented alphabetically by Energygram title. The Subject Index is cumulated with each issue by calendar year.

Simpson, W.F. Jr. (ed.)

1984-01-01T23:59:59.000Z

394

Superior Energy Performance FAQs (Sept. 2014)  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

... 8 What is the difference between energy intensity, and energy performance and the SEP energy performance indicator (SEnPI)...

395

Energy-Saving Incandescents | Department of Energy  

Energy Savers [EERE]

halogenhiresweb.eps Description Energy-saving incandescent lightbulbs - high-resolution EPS More Documents & Publications Energy-Saving Incandescents CFL Lightbulbs CFL...

396

Energy-Saving Incandescents | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

halogenshires.jpg Description Energy-saving incandescent lighbulbs - high-resolution JPG More Documents & Publications Energy-Saving Incandescents CFL Lightbulbs Lighting Tip Card...

397

Solar Energy Resource Center | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Resource Center Solar Energy Resource Center Sub Program Topic Resource Search Results Title Date Author SubProgram Topic Description...

398

Solar Energy Resource Center | Department of Energy  

Office of Environmental Management (EM)

Solar Energy Resource Center Solar Energy Resource Center Sub Program Topic Resource Search Results Title Date Author SubProgram Topic Description...

399

Review: Handbook of Descriptive Linguistic Fieldwork  

E-Print Network [OSTI]

The contents of the “Handbook of Descriptive LinguisticLinguistics Review Handbook of Descriptive LinguisticISSN 1544-7502 Review Handbook of Descriptive Linguistic

Bergqvist, Henrik

2011-01-01T23:59:59.000Z

400

A description and assessment of heliostat technology  

SciTech Connect (OSTI)

This report summarizes heliostat development through 1986 by the Department of Energy's Solar Thermal Central Receiver Program. It has been prepared to provide potential users and developers of Central Receiver Systems with an assessment and overview of the technology. The topics covered are design descriptions, cost information, operation, maintenance, reliability, cleaning, beam safety, evaluation instrumentation, materials, and future research and development recommendations. 169 refs., 69 figs., 36 tabs.

Mavis, C.L.

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

ARM - Field Campaign - Water Cycle Pilot Study Intensive Observations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

govCampaignsWater Cycle Pilot Study Intensive Observations govCampaignsWater Cycle Pilot Study Intensive Observations Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : Water Cycle Pilot Study Intensive Observations 2002.04.01 - 2002.06.30 Lead Scientist : Marvin Wesely For data sets, see below. Description The U.S. DOE Water Cycle Pilot Study (WCPS) is a 3-year feasibility investigation focused on accurately evaluating the water cycle components and using stable isotopes as an effective tool in doing so. The study area is primarily the Whitewater subbasin in the Walnut River Watershed in southeastern Kansas. Two intensive observations periods are planned, this first one in April to June 2002 and a second currently scheduled for December 2002 to February 2003. Observations will be made of precipitation

402

Spectral Intensity Patterns and Vibrational Phase Space Structure  

Science Journals Connector (OSTI)

91 Klamath Hall, Department of Chemistry, University of Oregon, Eugene, Oregon 97403-1253 ... In ref 7, we examined energy patterns of molecules with a 2:1 Fermi resonance between the local stretch and bend of a C?H group. ... The goal is to analyze relative intensities within polyads; the actual experimental intensity falls off sharply with polyad number. ...

Vivian Tyng; Michael E. Kellman

2009-07-17T23:59:59.000Z

403

China Energy Databook - Rev. 4  

E-Print Network [OSTI]

Consumption: Commercial and Biomass Energy, 1979 and 1987;Consumption: Commercial and Biomass Energy Energy IntensityEnd Use, Commercial and Biomass Energy Shares of Total

Sinton Editor, J.E.

2010-01-01T23:59:59.000Z

404

China Energy Databook - Rev. 4  

E-Print Network [OSTI]

try. Calcium carbide and phosphorous intensities declined,total energy use Yellow phosphorous, total energy use W o ototal energy use Yellow phosphorous, total energy use Wood

Sinton Editor, J.E.

2010-01-01T23:59:59.000Z

405

Energy Efficiency Financing  

Office of Energy Efficiency and Renewable Energy (EERE)

Information and examples of state financing for energy efficiency programs, with descriptions on implementation methods and concerns.

406

Teacher Notes Activity A Finding a Mathematical Description of a  

E-Print Network [OSTI]

's atmosphere, oceans, and land surface processes. These mathematical models have advantages and disadvantages describing: i) how the intensity of energy changes as a function of distance from a light source, and ii) how of the solar system is developed. Relationships derived in Activity A are used to determine the intensity

407

Energy and Greenhouse Gas Emissions in China: Growth, Transition, and Institutional Change  

E-Print Network [OSTI]

China’s decline in energy intensity? Resource and Energy2000. Energy Use and Energy Intensity of the U.S. ChemicalProduction Energy Use and Energy Intensity in China and the

Kahrl, Fredrich James

2011-01-01T23:59:59.000Z

408

Excitonic effects and chirality dependence of photoluminescence intensity of single wall carbon nanotubes  

E-Print Network [OSTI]

Excitonic effects and chirality dependence of photoluminescence intensity of single wall carbon characterization of semiconducting single wall carbon nanotubes (SWNTs) because the PL intensity and PL energy of the PL intensity and the energy shift of the PL peak position [3,4]. In the previous theoretical work [2

Maruyama, Shigeo

409

CERN News: Selection of the type of superconducting coil for the Omega project; New intensity records at the proton synchrotron; Progress with the Spiral Reader film measuring equipment; New technique at transition energy on the proton synchrotron; CERN Courier 10th anniversary; Equipment travelling from and to Serpukhov  

E-Print Network [OSTI]

CERN News: Selection of the type of superconducting coil for the Omega project; New intensity records at the proton synchrotron; Progress with the Spiral Reader film measuring equipment; New technique at transition energy on the proton synchrotron; CERN Courier 10th anniversary; Equipment travelling from and to Serpukhov

1969-01-01T23:59:59.000Z

410

Student Internship Programs Program Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Student Internship Programs Program Description The objective of the Laboratory's student internship programs is to provide students with opportunities for meaningful hands- on...

411

INTO Colorado State University, Academic Advisor: Short Description Position Description  

E-Print Network [OSTI]

INTO Colorado State University, Academic Advisor: Short Description Position Description INTO Colorado State University (INTO CSU) seeks one full-time, 12-month academic advisor who will advise INTO CSU students. The primary responsibility of the academic advisor is to promote and facilitate

Stephens, Graeme L.

412

Intense Currents in the Deep Northeast Pacific Ocean  

Science Journals Connector (OSTI)

Observations of deep currents in the northeast Pacific Ocean are reported that indicate that although the eddy kinetic energy level is, as expected, generally low, the deep northeast Pacific is subject to occasional intensely energetic events. ...

Howard J. Freeland

1993-08-01T23:59:59.000Z

413

Title of Document: LONGITUDINAL CONTROL OF INTENSE CHARGED PARTICLE BEAMS  

E-Print Network [OSTI]

ABSTRACT Title of Document: LONGITUDINAL CONTROL OF INTENSE CHARGED PARTICLE BEAMS Brian Louis, accelerator facilities are demanding beams with higher quality. Applications such as Free Electron Lasers energy spread throughout the accelerator. Fluctuations in beam energy or density at the low-energy side

Anlage, Steven

414

Automatic TLI recognition system, general description  

SciTech Connect (OSTI)

This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.

Lassahn, G.D.

1997-02-01T23:59:59.000Z

415

EIA - Annual Energy Outlook 2012 Early Release  

Gasoline and Diesel Fuel Update (EIA)

summary Introduction Economic growth Energy prices Energy consumption by sector Energy consumption by primary fuel Energy intensity Energy production and imports Electricity...

416

Federal Energy and Water Management Awards 2014  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

District Washington built the foundation for a comprehensive energy program that reduced energy intensity by nearly 19% and water intensity by 13% from the respective baselines...

417

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: Marketing Manager Date: 7/23/2013 Purpose of Position To manage and coordinate all marketing efforts for University Recreation with primary;Seattle University Recreation Position Description Title: Marketing Manager Date: 7/23/2013 Minimum

Carter, John

418

Web Page Development Company Description  

E-Print Network [OSTI]

Web Page Development Company Description: Service Provider web site Short Project Name: Research support and networking. Company Description: Website Building Company. This company drives traffic to websites through search engines, and optimizes websites over time. Short Project Name: Site Build Project

Dahl, David B.

419

Description of the Scenario Machine  

E-Print Network [OSTI]

We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

2007-04-11T23:59:59.000Z

420

Buildings Energy Data Book  

Buildings Energy Data Book [EERE]

2.1 Residential Sector Energy Consumption 2.1 Residential Sector Energy Consumption 2.2 Residential Sector Characteristics 2.3 Residential Sector Expenditures 2.4 Residential Environmental Data 2.5 Residential Construction and Housing Market 2.6 Residential Home Improvements 2.7 Multi-Family Housing 2.8 Industrialized Housing 2.9 Low-Income Housing 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables Chapter 2 focuses on energy use in the U.S. residential buildings sector. Section 2.1 provides data on energy consumption by fuel type and end use, as well as energy consumption intensities for different housing categories. Section 2.2 presents characteristics of average households and changes in the U.S. housing stock over time. Sections 2.3 and 2.4 address energy-related expenditures and residential sector emissions, respectively. Section 2.5 contains statistics on housing construction, existing home sales, and mortgages. Section 2.6 presents data on home improvement spending and trends. Section 2.7 describes the industrialized housing industry, including the top manufacturers of various manufactured home products. Section 2.8 presents information on low-income housing and Federal weatherization programs. The main points from this chapter are summarized below:

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Potential Energy Savings and CO2 Emissions Reduction of China's Cement Industry  

E-Print Network [OSTI]

world best practice energy intensity and implements currently available aggressive energy efficiency and carbonworld best practice energy intensity level and implement all aggressive energy efficiency and carbon

Ke, Jing

2013-01-01T23:59:59.000Z

422

Low energy positron diffraction from Cu(111): Importance of surface loss processes at large angles of incidence  

SciTech Connect (OSTI)

Intensities of positrons specularly diffracted from Cu(111) were measured at the Brandeis positron beam facility and analyzed in the energy range 8eVintensities were calculated for the known geometry of Cu(111) using a dynamical multiple scattering methodology. Above E = 50eV this methodology gives a useful account of the measured intensities using a constant imaginary optical potential of V{sub i} = 4eV. At lower energies strong energy dependences occur associated both with multiple elastic scattering phenomena within atomic layers of Cu parallel to the surface and with the thresholds of inelastic channels (e.g., plasmon creation). Use of the free electron calculation of V{sub i} shows that energy dependence of inelastic processes is necessary to obtain a satisfactory description of the absolute magnitude of the diffracted intensities below E = 50eV. Detailed comparison of the calculated and observed diffraction intensities reveals the necessity of incorporating surface loss processes explicitly into the model in order to achieve a quantitative description of the measured intensities for E<40eV and {theta}>40{degree}. 30 refs., 5 figs., 1 tab.

Lessor, D.L. (Pacific Northwest Lab., Richland, WA (USA)); Duke, C.B. (Xerox Corp., Webster, NY (USA). Webster Research Center); Lippel, P.H.; Brandes, G.R.; Canter, K.F.; Horsky, T.N. (Brandeis Univ., Waltham, MA (USA). Dept. of Physics)

1990-10-01T23:59:59.000Z

423

Theoretical descriptions of compound-nuclear reactions: open problems & challenges  

E-Print Network [OSTI]

Compound-nuclear processes play an important role for nuclear physics applications and are crucial for our understanding of the nuclear many-body problem. Despite intensive interest in this area, some of the available theoretical developments have not yet been fully tested and implemented. We revisit the general theory of compound-nuclear reactions, discuss descriptions of pre-equilibrium reactions, and consider extensions that are needed in order to get cross section information from indirect measurements.

Brett V. Carlson; Jutta E. Escher; Mahir S. Hussein

2014-03-04T23:59:59.000Z

424

Laser spectroscopy of primary energy conversion in  

Science Journals Connector (OSTI)

A review is given of the current status of research on primary processes of energy conversion in photosynthesis. The structural and functional organization of photosynthetic apparatus of higher plants is considered. A description is given of laser probing methods, applications of high-speed optical shutters, and picosecond spectrofluorometry involving the use of image converters. A functional scheme of primary energy conversion by Rhodopseudomonas sphaeroides bacteria is given for the 10?12–10?4 sec range of time intervals. Some nonlinear processes resulting from intense excitation of the pigment apparatus of photosynthesizing organisms are considered.

V Z Pashchenko; L B Rubin

1978-01-01T23:59:59.000Z

425

World Primary Energy Overview  

Science Journals Connector (OSTI)

Overview of Energy Production and Consumption Energy can be defined as primary energy or secondary energy depending on the intensity of use and type of fuel source. Primary energy includes forms obtained from fou...

Charles E. Brown Ph.D.

2002-01-01T23:59:59.000Z

426

DESCRIPTION OF THE RESEARCH  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Shallow Viscous Oil Reserves in North Slope Shallow Viscous Oil Reserves in North Slope ID Number: DE-FC26-01BC15186 Final Report Reporting Period Start Date: 9-25-2001 Reporting Period End Date: 9-24-2004 Submitted to the U.S. Department of Energy Kishore K. Mohanty Department of Chemical Engineering University of Houston 4800 Calhoun Road Houston, Texas 77204-4004 December, 2004 1 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, or process disclosed, or represents that its use would not infringe privately owned rights. Reference

427

GREEN Grid PhD Project Descriptions February 2014  

E-Print Network [OSTI]

, and with a number of electricity industry partners. The project, officially titled "Renewable Energy and the Smart Grid" will contribute to a future New Zealand with greater renewable generation and improved energy.epecentre.ac.nz. PhD Description The growth of inherently variable distributed renewable generation

Hickman, Mark

428

FACT SHEET: Clean Coal University Research Awards and Project Descriptions  

Broader source: Energy.gov (indexed) [DOE]

FACT SHEET: Clean Coal University Research Awards and Project FACT SHEET: Clean Coal University Research Awards and Project Descriptions FACT SHEET: Clean Coal University Research Awards and Project Descriptions As part of President Obama's all-of-the-above approach to American energy, the Energy Department announced on June 6, 2012, that nine universities have won awards for research projects that will continue to support innovation and development of clean coal technologies. This fact sheet includes detailed project descriptions for each university-led research award. FACT SHEET_ Clean Coal University Project Descriptions_0.pdf More Documents & Publications University Coal Research Program 2013 Selections Report on Assessment of Environmentally--Assisted Fatigue for LWR Extended Service Conditions FAQS Reference Guide - Mechanical Systems

429

Project_Descriptions_ITP_ARRA_Awards.xls  

Broader source: Energy.gov (indexed) [DOE]

Selections for Industrial Technologies Program Recovery Act Funding Selections for Industrial Technologies Program Recovery Act Funding Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment Award Winners City and State Project Description Total DOE Funding Air Products and Chemicals, Inc. Middletown, OH Waste Energy Project at the AK Steel Corporation Middletown Works. The project will construct a combined cycle power generation plant at the Middletown, OH, works of AK Steel that will capture and process the blast furnace gas (BFG). The BFG, generated in ironmaking operations, is either flared or used to make steam needed for industrial processes . Currently, over 50% of the BFG is flared. This project will utilize

430

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: University Recreation Fitness Center Recreation in the William F. Eisiminger Fitness Center and Archbishop Connolly Complex. Primary Duties all University Recreation and Fitness Center Policies · Educate members on proper Fitness Center

Carter, John

431

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: Connolly Complex Lifeguard Date: 7/or participants by enforcing the policies and procedures of the University Recreation Department. Primary Duties efficient and competent manner to the satisfaction of the Assistant Director of University Recreation

Carter, John

432

College of Engineering Program Description  

E-Print Network [OSTI]

College of Engineering Program Description e Surveying Engineering Technology Program trains individuals to enter a rewarding career in professional surveying. Professional surveying combines history, art, mathematics, communications, science, civil engineering, and business with surveying engineering

Thomas, Andrew

433

Description Plants ESIS ESD FSGD  

E-Print Network [OSTI]

Ecological Site Description Plants ESIS ESD FSGD ESI Forestland ESI Rangeland Data Access > Return CHARACTERISTICS Site Type: Rangeland Site Name: Red Sandy Loam 25-32" PZ Site ID: R082AY369TX Major Land Resource

434

Energy Efficiency and Greenhouse Gases | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

energy efficiency and reduce greenhouse gas emissions through a measurable reduction of energy intensity. Energy efficiency evaluations and initiatives are implemented on the...

435

Gamma radiation field intensity meter  

DOE Patents [OSTI]

A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode. 4 figs.

Thacker, L.H.

1995-10-17T23:59:59.000Z

436

Gamma radiation field intensity meter  

DOE Patents [OSTI]

A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode. 4 figs.

Thacker, L.H.

1994-08-16T23:59:59.000Z

437

Gamma radiation field intensity meter  

DOE Patents [OSTI]

A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode.

Thacker, Louis H. (Knoxville, TN)

1995-01-01T23:59:59.000Z

438

Gamma radiation field intensity meter  

DOE Patents [OSTI]

A gamma radiation intensity meter measures dose rate of a radiation field. The gamma radiation intensity meter includes a tritium battery emitting beta rays generating a current which is essentially constant. Dose rate is correlated to an amount of movement of an electroscope element charged by the tritium battery. Ionizing radiation decreases the voltage at the element and causes movement. A bleed resistor is coupled between the electroscope support element or electrode and the ionization chamber wall electrode.

Thacker, Louis H. (Knoxville, TN)

1994-01-01T23:59:59.000Z

439

Solar panels are cost intensive, have limitations with respect to  

E-Print Network [OSTI]

advantage of being able to convert sunlight into clean energy. After the glass is coated, we install clean electricity. Advantages · Building-integratable. · Contributes to EU targets towards energySolar panels are cost intensive, have limitations with respect to where they can be integrated

Langendoen, Koen

440

Energy Efficiency Indicators Methodology Booklet  

E-Print Network [OSTI]

targets over their energy per GDP intensity. However, littleefficiency. Only total energy per GDP was available for useintensities (Energy Consumption per $ GDP or $ PPP), are

Sathaye, Jayant

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Better Plants | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

demonstrating their commitment to energy savings by signing a voluntary pledge to reduce energy intensity by 25% over ten years. Partners are implementing cost-effective energy...

442

LANL | Physics | High Energy Physics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

high energy physics frontiers as defined by the Department of Energy's Office of High Energy Physics. Exploring the intensity frontier On the trail of one of the greatest...

443

GENERATING TEXT DESCRIPTIONS FOR GEOGRAPHICALLY DISTRIBUTED SENSORS  

E-Print Network [OSTI]

GENERATING TEXT DESCRIPTIONS FOR GEOGRAPHICALLY DISTRIBUTED SENSORS Martin Molina and Javier generation of geographic descriptions in natural language for geographically distributed sensors. We describe generation of geographic descriptions in natural language for geographically distributed sensors. We describe

Molina, Martín

444

ENERGY USE AND CONSERVATION IN INDUSTRIALIZED COUNTRIES  

E-Print Network [OSTI]

bear directly on energy use: the mix of non-energy goods andU.S. long haul mix is less energy intensive but total use isby consumers, and the mix of key energy intensive activities

Schipper, L.

2012-01-01T23:59:59.000Z

445

Low-intensity beam diagnostics with particle detectors  

SciTech Connect (OSTI)

The measure of low intensity beams at low-medium energy is one of the major challenge in beam diagnostics. This subject is of great interest for the design of accelerator-based medical and radioactive beam facilities. In this paper we discuss new developments in image-based devices to measure low-intensity beams. All the investigated devices must guarantee measurement of the total beam current and its transverse distribution. {copyright} {ital 1997 American Institute of Physics.}

Rovelli, A.; Ciavola, G.; Cuttone, G.; Finocchiaro, P.; Raia, G. [INFN-LNS, Via S. Sofia 44/A Catania, 95125 (Italy); De Martinis, C.; Giove, D. [INFN-LASA, Via F.lli Cervi 201 Segrate (Midway Islands), 20090 (Italy)

1997-01-01T23:59:59.000Z

446

Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy newsroomassetsimagesenergy-icon.png Energy Research into alternative forms of energy, and improving and securing the power grid, is a major national security...

447

Technical Qualification Program Description - Integrated Support Center, Chicago Office  

Broader source: Energy.gov (indexed) [DOE]

DEPART ENT of Office of DEPART ENT of Office of ENERGY I Science Integrated Support Center Chicago Office Technical Qualification Program Description ~~~~~~'?£H(.k:1/Zi.':"r'fl. ; ;!. / ; h tJ/ tl oxa nn e E. Purucker, M anager ~ Office of Science - Chicago Office Technical Qualification Program Description Revision 2, November 2010 CONCURRENCE The Office of Science-Chicago Office (SC-CH) is the sponsor for this Technical Qualification Program (TQP) Description. This is applicable to SC-CH, New Brunswick Laboratory (NBLL Ames Site Office (AMSO) and Argonne Site Office (ASO). These offices are in joint participation and endorsement of the SC-CH Technical Qualification Program process and have also provided concurrence below. The SC-CH Manager is the approval authority for this program description.

448

System Advisor Model, SAM 2011.12.2: General Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

System Advisor Model, System Advisor Model, SAM 2011.12.2: General Description Paul Gilman and Aron Dobos Technical Report NREL/TP-6A20-53437 February 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 System Advisor Model, SAM 2011.12.2: General Description Paul Gilman and Aron Dobos Prepared under Task No. SS12.1130 Technical Report NREL/TP-6A20-53437 February 2012 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

449

Intensity Frontier: More Information | U.S. DOE Office of Science (SC)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Intensity Intensity Frontier » Intensity Frontier: More Information High Energy Physics (HEP) HEP Home About Research Snowmass / P5 Planning Process Intensity Frontier Cosmic Frontier Theoretical Physics Advanced Technology R&D Accelerator R&D Stewardship Research Highlights .pdf file (13.1MB) Questions for the Universe Accomplishments Facilities Science Highlights Benefits of HEP Funding Opportunities Advisory Committees News & Resources Contact Information High Energy Physics U.S. Department of Energy SC-25/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3624 F: (301) 903-2597 E: sc.hep@science.doe.gov More Information » Intensity Frontier Intensity Frontier: More Information Print Text Size: A A A RSS Feeds FeedbackShare Page Experiments at the Intensity Frontier aim to transform our understanding of

450

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TTPs - Tools, Techniques, and Procedures Triage Transportation - Planes, Trains, and Automobiles Operator Proficiency WNRR 2013 The 2013 Western National Robot...

451

Description  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Josh Warner, Manager Contract Administration Mike Rose, Manager Smart GridDemand Response Lee Hall, Manager Programs Brent Barclay, Manager IndustrialAg Sector Lead...

452

Williams Energy Services | Open Energy Information  

Open Energy Info (EERE)

Agreement Partnership Year 1999 Link to project description http:www.nrel.govnewspress1999899corn.html Williams Energy Services is a company located in Tulsa, OK....

453

Energy 101: Fuel Cells | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Fuel Cells Energy 101: Fuel Cells Addthis Description Learn everything you need to know about fuel cells. Topic Hydrogen & Fuel Cells...

454

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: University Recreation Operations Manager Date: 8/3/2012 Purpose of the Position The University Recreation Operations Manager assists walkthroughs of the Fitness Center · Provide on-site staff supervision in recreation facilities · Assist

Carter, John

455

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: Marketing Manager Date: 8/6/12 Purpose of Position To manage and coordinate all marketing efforts for University Recreation with primary Content Development · Info boards and frames · Promotional materials #12;Seattle University Recreation

Carter, John

456

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: University Recreation ST.A.R.T Member will assist in the promotion and awareness of the University Recreation Brand and programs to the students of all University Recreation Employees. ST.A.R.T Members are comprised of members of the University

Carter, John

457

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: Aquatic Manager Date: 7/19/2012 Purpose/or participants by enforcing the policies and procedures of the University Recreation Department. Primary Duties of University Recreation - Aquatics & Risk Management and the lifeguard team · Assign tasks to staff when

Carter, John

458

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: Aquatic Manager Date: 7/23/2013 Purpose/or participants by enforcing the policies and procedures of the University Recreation Department. Primary Duties of University Recreation - Aquatics & Risk Management and the lifeguard team · Assign tasks to staff when

Carter, John

459

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: Outdoor Adventure Recreation Program- inclusive. Duties may be added, deleted and assigned based on Assistant Director of University Recreation/patrons in a timely manner via email, phone, or other communication methods o Update University Recreation's Facebook

Carter, John

460

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: University Recreation Office Manager Date: 8/2/12 Purpose of the Position The University Recreation Office Manager is an integral part of the University Recreation department and will work with the Assistant Director of University Recreation

Carter, John

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: University Recreation Office Manager Date: 7/23/2013 Purpose of the Position The University Recreation Office Manager is an integral part of the University Recreation department and will work with the Assistant Director of University Recreation

Carter, John

462

Seattle University Recreation Position Description  

E-Print Network [OSTI]

Seattle University Recreation Position Description Title: University Recreation Operations Manager Date: 7/23/2013 Purpose of the Position The University Recreation Operations Manager assists walkthroughs of the Fitness Center · Provide on-site staff supervision in recreation facilities · Assist

Carter, John

463

Sustainable Internet Architecture PROJECT DESCRIPTION  

E-Print Network [OSTI]

Sustainable Internet Architecture PROJECT DESCRIPTION 1 Introduction The Internet currently plays that the problems in the current Internet architecture stem from its lack of sustainability which impedes future de of challenges. Numerous research studies on a new Internet architecture (e.g., [16, 37, 48, 54, 55]) have

Kuzmanovic, Aleksandar

464

Project Description Executive Summary Report  

E-Print Network [OSTI]

$Total Project Cost: 1,000,000Auxillary Enterprises Balances $ 9,400,000Revenue Financing System Bonds $ 1Project Description Executive Summary Report Project Information Project Budget Project Funding 302-680 Parking Structure Phase I This project consists of a 750 space parking garage of approximately 251

O'Toole, Alice J.

465

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: FOOD SERVICE HELPER (pay of food service to include food preparation and production, including customer service, equipment be assigned. Direct the activities of student food service workers in assigned area. Assist in the training

Endres. William J.

466

THE UNIVERSITY OF CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

1 THE UNIVERSITY OF ROCHESTER CLASSIFICATION DESCRIPTION TITLE: Web Specialist and Analyst DATE: 01 ­ Advancement Service and provide assistance in the development and management of web-based assets, direct solicitations support ­ webpages for print and e-mail marketing support, web development, Share

Portman, Douglas

467

ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS  

E-Print Network [OSTI]

2009­2010 ARCHITECTURE PROGRAMS AND COURSE DESCRIPTIONS UNIVERSITY OF MICHIGAN #12;© 2008, degree options, and courses for the UM architecture program. This document is available for download from the Taubman College website at http://www.TaubmanCollege. umich.edu/architecture/bulletin/. If you

Kamat, Vineet R.

468

How Can China Lighten Up? Urbanization, Industrialization and Energy Demand Scenarios  

E-Print Network [OSTI]

ammonia production energy intensity lags behind the worldworld best practice primary energy intensity for ethylene productionproduction using only 23% more energy than the current world

Aden, Nathaniel T.

2010-01-01T23:59:59.000Z

469

What Can China Do? China's Best Alternative Outcome for Energy Efficiency and CO2 Emissions  

E-Print Network [OSTI]

Aizhu Chen. “China’s energy intensity rises 3.2 pct in Q1. ”Table 1 Energy Use, Energy Intensity, and GDP Data (2005-2 Table 2 Frozen 2005 Energy Intensity Baseline and Reported

G. Fridley, David

2010-01-01T23:59:59.000Z

470

The Greening of the Middle Kingdom: The Story of Energy Efficiency in China  

E-Print Network [OSTI]

China View. 2009. China’s energy intensity down 2.9% in Q1:demand at constant energy intensity, 1980–2006. Source: NBS,percent reduction in energy intensity (defined as energy use

Zhou, Nan

2010-01-01T23:59:59.000Z

471

Experiments at the Intensity Frontier | U.S. DOE Office of Science (SC)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Intensity Frontier Intensity Frontier High Energy Physics (HEP) HEP Home About Research Facilities Facility Ops Experiments at the Energy Frontier Experiments at the Intensity Frontier Experiments at the Cosmic Frontier Projects, Missions, and Status HEP User Facilities Science Highlights Benefits of HEP Funding Opportunities Advisory Committees News & Resources Contact Information High Energy Physics U.S. Department of Energy SC-25/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3624 F: (301) 903-2597 E: sc.hep@science.doe.gov More Information » Facilities Experiments at the Intensity Frontier Print Text Size: A A A RSS Feeds FeedbackShare Page The Intensity Frontier, accessed with a combination of intense particle beams and highly sensitive detectors, offers a second, unique investigation

472

Estimates of Embodied Global Energy and Air-Emission Intensities of Japanese Products for Building a Japanese Input–Output Life Cycle Assessment Database with a Global System Boundary  

Science Journals Connector (OSTI)

To build a life cycle assessment (LCA) database of Japanese products embracing their global supply chains in a manner requiring lower time and labor burdens, this study estimates the intensity of embodied global environmental burden for commodities produced in Japan. ... This sector is followed by several food- and agriculture-related sectors such as seeds and seedlings (JD11) (?57%), flour and other grain mill products (JD47) (?52%), timber (JD90) (?52%), and Feeds (JD72) (?51%). ...

Keisuke Nansai; Yasushi Kondo; Shigemi Kagawa; Sangwon Suh; Kenichi Nakajima; Rokuta Inaba; Susumu Tohno

2012-08-10T23:59:59.000Z

473

Property:EnergyAccessImpactAreas | Open Energy Information  

Open Energy Info (EERE)

Name EnergyAccessImpactAreas Property Type String Description Impact Areas Retrieved from "http:en.openei.orgwindex.php?titleProperty:EnergyAccessImpactAreas&oldid421177...

474

Property:EnergyAccessPowerSource | Open Energy Information  

Open Energy Info (EERE)

Name EnergyAccessPowerSource Property Type String Description Power Source Retrieved from "http:en.openei.orgwindex.php?titleProperty:EnergyAccessPowerSource&oldid421179...

475

Department of Energy Advance Methane Hydrates Science and Technology Projects  

Broader source: Energy.gov [DOE]

Descriptions for Energy Department Methane Hydrates Science and Technology Projects, August 31, 2012

476

High intensity proton operation at the Brookhaven AGS accelerator complex  

SciTech Connect (OSTI)

With the completion of the AGS rf upgrade, and the implementation of a transition {open_quotes}jump{close_quotes}, all of accelerator systems were in place in 1994 to allow acceleration of the proton intensity available from the AGS Booster injector to AGS extraction energy and delivery to the high energy users. Beam commissioning results with these new systems are presented. Progress in identifying and overcoming other obstacles to higher intensity are given. These include a careful exploration of the stopband strengths present on the AGS injection magnetic porch, and implementation of the AGS single bunch transverse dampers throughout the acceleration cycle.

Ahrens, L.A.; Blaskiewicz, M.; Bleser, E.; Brennan, J.M.; Gardner, C.; Glenn, J.W.; Onillon, E.; Reece, R.K.; Roser, T.; Soukas, A. [and others

1994-08-01T23:59:59.000Z

477

Data-intensive computing laying foundation for biological breakthroughs  

SciTech Connect (OSTI)

Finding a different way is the goal of the Data-Intensive Computing for Complex Biological Systems (Biopilot) project—a joint research effort between the Pacific Northwest National Laboratory (PNNL) and Oak Ridge National Laboratory funded by the U.S. Department of Energy’s Office of Advanced Scientific Computing Research. The two national laboratories, both of whom are world leaders in computing and computational sciences, are teaming to support areas of biological research in urgent need of data-intensive computing capabilities.

Hachigian, David J.

2007-06-18T23:59:59.000Z

478

Past Projects | Department of Energy  

Energy Savers [EERE]

provide complete descriptions for whole building energy analysis using EnergyPlus simulation software. These modules offer a consistent baseline of comparison and improve...

479

EEE 463 Electrical Power Plants (3) [F] Course (Catalog) Description  

E-Print Network [OSTI]

. Environmental impact of electric generation (3 lectures) 9. Advanced energy conversion systems (geothermalEEE 463 Electrical Power Plants (3) [F] Course (Catalog) Description: Generation of electric power using fossil, nuclear and renewable, including solar, geothermal, wind, hydroelectric, biomass and ocean

Zhang, Junshan

480

Process and Energy Optimization Revitalizes Energy Management at Eastman  

E-Print Network [OSTI]

In 2005, the Eastman-Texas Operations Energy Management Team (EMT), in response to rapidly increasing energy prices, initiated a new energy optimization program to optimize the site’s energy intensity. This new program utilized a process and energy...

Greenwaldt, W. C.

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "description energy intensity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Webcast of the Renewable Energy Competency Model | Department...  

Broader source: Energy.gov (indexed) [DOE]

Renewable Energy Competency Model Webcast of the Renewable Energy Competency Model Addthis Description The Department of Energy held a webcast titled ""Renewable Energy Competency...

482

Temperatures Indicated by Intensity Distributions in Band Spectra  

Science Journals Connector (OSTI)

It is generally supposed that the intensity of any particular line in a band spectrum may be calculated from the Maxwell-Boltzmann law, assuming the gas to be in temperature equilibrium. From the results of this experimental work, it appears that under some conditions of excitation other factors than the temperature of the gas govern the intensity distribution. Measurements on the negative bands of N2+ excited in low voltage arcs in the pure gas show that at 1100°K and 2800°K the distribution of intensities among the rotational lines is exactly the same, whilst the admixture of helium with nitrogen alters the distribution completely and gives a much lower indicated temperature. Similar results are found with the first negative bands of CO+. The differences are accounted for by the conversion of translational energy of the electrons into rotational energy of the molecules when the bands are excited by electron impacts in the pure gas. When the bands are excited by impacts of the second kind in gas mixtures, no change in rotational energy occurs and thus the indicated temperature is much lower. The distribution of intensity among the vibrational states of the molecules has been examined for the complete system of negative bands of N2+. While almost all of the energy is concentrated in the low vibration states when the bands are excited by electron impacts, the energy is spread out towards the higher vibration states when the excitation is by collisions of the second kind with metastable helium atoms.

O. S. Duffendack; R. W. Revans; A. S. Roy

1934-06-01T23:59:59.000Z

483

Federal Energy and Water Management Awards 2014  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

efforts of each installation in the Command, led to a 29% reduction in facility energy intensity and a 46% reduction in water intensity from their respective baseline...

484

Innovation, renewable energy, and state investment: Case studies of leading clean energy funds  

E-Print Network [OSTI]

Collaborative); John Lupo (Xcel Energy); Bill Grant (Izaakfirst solicitation and results from Xcel Energy’s RenewableSummary Case Description Xcel’s Renewable Development Fund (

Wiser, Ryan; Bolinger, Mark; Milford, Lewis; Porter, Kevin; Clark, Roger

2002-01-01T23:59:59.000Z

485

ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE  

Office of Legacy Management (LM)

ACTION DESCRIPTION MEMORANDUM ACTION DESCRIPTION MEMORANDUM PROPOSED DECONTAMINATION OF THREE BUILDINGS AT THE UNIVERSITY OF CHICAGO CONTAMINATED AS A RESULT OF PREVIOUS MED/AEC ACTIVITIES Prepared by Environmental Research Division Argonne National Laboratory Argonne, Illinois December 1983 Prepared for U.S. Department of Energy Oak Ridge Operations Technical Services Division Oak Ridge, Tennessee II-39 CONTENTS Page Summary of Proposed Action ....................... 1 Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. 1 Background and Need for Action ..................... 2 Proposed Remedial Action ........................ 3 Potential Issues ................... ......... 4 Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. 6 Tables. ............ .................. 7 References ................... ............ 8

486

Energy  

Science Journals Connector (OSTI)

Energy ... “Scientific Challenges in Sustainable Energy Technology,” by Nathan S. Lewis of the California Institute of Technology, summarizes data on energy resources and analyses the implications for human society. ... ConfChem Conference on Educating the Next Generation: Green and Sustainable Chemistry—Solar Energy: A Chemistry Course on Sustainability for General Science Education and Quantitative Reasoning ...

John W. Moore

2008-07-01T23:59:59.000Z

487

Continuous Snow Depth, Intensive Site 1, Barrow, Alaska  

SciTech Connect (OSTI)

Continuous Snow depth data are being collected at several points within four intensive study areas in Barrow, Alaska. These data are being collected to better understand the energy dynamics above the active layer and permafrost. They complement in-situ snow and soil measurements at this location. The data could also be used as supporting measurements for other research and modeling activities.

Cable, William; Romanovsky, Vladimir; Hinzman, Larry; Busey, Bob

2014-11-06T23:59:59.000Z

488

High–intensity lasers: interactions with atoms, molecules and clusters  

Science Journals Connector (OSTI)

...tra from around 2500-atom xenon clusters irradiated by 2 1016...charge states up to 12+ in xenon and 8+ in krypton at an intensity...process converts the coherent oscillation energy of the electron cloud...result of a resonantly driven oscillation of the entire cluster elec...

1998-01-01T23:59:59.000Z

489

Continuous Snow Depth, Intensive Site 1, Barrow, Alaska  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Continuous Snow depth data are being collected at several points within four intensive study areas in Barrow, Alaska. These data are being collected to better understand the energy dynamics above the active layer and permafrost. They complement in-situ snow and soil measurements at this location. The data could also be used as supporting measurements for other research and modeling activities.

Cable, William; Romanovsky, Vladimir; Hinzman, Larry; Busey, Bob

490

Astrophysics with Intense and Ultra-Intense Lasers "Laser Astrophysics"  

Science Journals Connector (OSTI)

......the experimental neutron yield and 1D simulation yield per input laser energy of 10 kJ are plotted as a function of the target...example, the evolution of stars. The energy generated by nuclear fusion around the center of the sun is transferred toward the outer......

Hideaki Takabe

2001-05-01T23:59:59.000Z

491

Position, rotation, and intensity invariant recognizing method  

DOE Patents [OSTI]

A method for recognizing the presence of a particular target in a field of view which is target position, rotation, and intensity invariant includes the preparing of a target-specific invariant filter from a combination of all eigen-modes of a pattern of the particular target. Coherent radiation from the field of view is then imaged into an optical correlator in which the invariant filter is located. The invariant filter is rotated in the frequency plane of the optical correlator in order to produce a constant-amplitude rotational response in a correlation output plane when the particular target is present in the field of view. Any constant response is thus detected in the output The U.S. Government has rights in this invention pursuant to Contract No. DE-AC04-76DP00789 between the U.S. Department of Energy and AT&T Technologies, Inc.

Ochoa, Ellen (Pleasanton, CA); Schils, George F. (San Ramon, CA); Sweeney, Donald W. (Alamo, CA)

1989-01-01T23:59:59.000Z

492

Energy Information Administration - Commercial Energy Consumption...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

8A. Natural Gas Consumption and Conditional Energy Intensity by Census Division for All Buildings, 2003: Part 2 Total Natural Gas Consumption (billion cubic feet) Total Floorspace...

493

Energy Information Administration - Commercial Energy Consumption...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

2A. Natural Gas Consumption and Conditional Energy Intensity by Year Constructed for All Buildings, 2003 Total Natural Gas Consumption (billion cubic feet) Total Floorspace of...

494

Energy Information Administration - Commercial Energy Consumption...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

0A. Natural Gas Consumption and Conditional Energy Intensity by Climate Zonea for All Buildings, 2003 Total Natural Gas Consumption (billion cubic feet) Total Floorspace of...

495

Energy Information Administration - Commercial Energy Consumption...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

7A. Natural Gas Consumption and Conditional Energy Intensity by Census Division for All Buildings, 2003: Part 1 Total Natural Gas Consumption (billion cubic feet) Total Floorspace...

496

Energy Information Administration - Commercial Energy Consumption...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Table C22. Electricity Consumption and Conditional Energy Intensity by Year Constructed for Non-Mall Buildings, 2003 Total Electricity Consumption (billion kWh) Total Floorspace...

497

Energy Information Administration - Commercial Energy Consumption...  

Gasoline and Diesel Fuel Update (EIA)

5A. Electricity Consumption and Conditional Energy Intensity by Census Region for All Buildings, 2003 Total Electricity Consumption (billion kWh) Total Floorspace of Buildings...

498

Energy Information Administration - Commercial Energy Consumption...  

Gasoline and Diesel Fuel Update (EIA)

5A. Natural Gas Consumption and Conditional Energy Intensity by Census Region for All Buildings, 2003 Total Natural Gas Consumption (billion cubic feet) Total Floorspace of...

499

Energy Information Administration - Commercial Energy Consumption...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

7A. Electricity Consumption and Conditional Energy Intensity by Census Division for All Buildings, 2003: Part 1 Total Electricity Consumption (billion kWh) Total Floorspace of...

500

Energy Information Administration - Commercial Energy Consumption...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

2A. Electricity Consumption and Conditional Energy Intensity by Year Constructed for All Buildings, 2003 Total Electricity Consumption (billion kWh) Total Floorspace of Buildings...