National Library of Energy BETA

Sample records for des mines du

  1. APUI Incubateur de l Ecole des Mines de Douai | Open Energy Informatio...

    Open Energy Info (EERE)

    APUI Incubateur de l Ecole des Mines de Douai Jump to: navigation, search Name: APUI Incubateur de l'Ecole des Mines de Douai Place: France Sector: Services Product: General...

  2. Comparison of effectiveness of sub-slab ventilation systems for indoor radon mitigation: A numerical study; Comparaison a l`aide d`un outil numerique de l`efficacite des systemes de ventilation active du sol limitant la penetration du radon dans l`habitat

    SciTech Connect (OSTI)

    Bonnefous, Y.C. |; Gadgil, A.J.; Allard, F.

    1992-04-01

    The functioning of an active sub-slab ventilation system (SVS) has been studied successfully with the help of a previously evaluated numerical model. The parameters explored are the permeability of the sub-slab and the gravel placed beneath it, the amplitude of applied pressure at the installation point of the system and the functioning method: depressurization or pressurization. The mechanisms contributing to the success of the two systems are identified. This numerical study shows that the presence of a layer of gravel beneath the sub-slab considerably improves the performance of the SVS. Considered separately from the extremely permeable sub-slabs, the depressurization systems perform better than the pressurization systems. 17 refs. [Francais] Le fonctionnement des Systemes de Ventilation active du Sol (SVS) a ete etudie a l`aide d`un outil numerique precedemment evalue avec succes. Les parametres explores sont les permeabilites du sol et du gravier place sous plancher bas, l`amplitude de la pression appliquee au point d`installation du systeme, et le mode de fonctionnement: Depressurisation ou Pressurisation. Les mecanismes contribuant au succes des deux systemes sont identifies. Cette etude numerique montre que la presence d`une couche de gravier sous plancher bas ameliore de facon considerable les performances des SVS. Mis a part le cas des sols extremement permeables, les systemes de Depressurisation ont de meilleures performances que les systemes de Pressurisation. 17 refs.

  3. Mining

    Broader source: Energy.gov [DOE]

    Supply and cost management–including energy costs–pose key challenges for U.S. mining companies. The industry has worked with AMO to develop a range of resources for increasing energy efficiency and reducing costs.

  4. L'Aventure du LHC

    ScienceCinema (OSTI)

    None

    2011-10-06

    Cette présentation s?adressera principalement aux personnes qui ont construit le LHC. La construction du LHC fut longue et difficile. De nombreux problèmes sont apparus en cours de route. Tous ont été résolus grâce au dévouement et à l?engagement du personnel et des collaborateurs. Je reviendrai sur les coups durs et les réussites qui ont marqués ces 15 dernières années et je vous montrerai combien cette machine, le fruit de vos efforts, est extraordinaire.

  5. Precision Mining

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Precision Mining Double Beta Decay Dark Matter Biology Repository Science Renewable Energy Precision Mining at WIPP is Routine All tunnels that make up the WIPP underground are ...

  6. Longwall mining

    SciTech Connect (OSTI)

    1995-03-14

    As part of EIA`s program to provide information on coal, this report, Longwall-Mining, describes longwall mining and compares it with other underground mining methods. Using data from EIA and private sector surveys, the report describes major changes in the geologic, technological, and operating characteristics of longwall mining over the past decade. Most important, the report shows how these changes led to dramatic improvements in longwall mining productivity. For readers interested in the history of longwall mining and greater detail on recent developments affecting longwall mining, the report includes a bibliography.

  7. ITP Mining: Exploration and Mining Technology Roadmap

    Broader source: Energy.gov [DOE]

    This document describes the Mining Industry of the Future's development of technology roadmaps to guide collaborative research activities for mining.

  8. African mining

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This book contains papers presented at a conference addressing the development of the minerals industry in Africa. Topics covered include: A review - past, present and future - of Zimbabwe's mining industry; Geomorphological processes and related mineralization in Tanzania; and Rock mechanics investigations at Mufulira mine, Zambia.

  9. Forum des Jeuns du Gabon | Open Energy Information

    Open Energy Info (EERE)

    drought and land degradation, Environmentally sound technologies, Gender, Human rights and Sustainable development plans References "UNEP Major Groups Directory"...

  10. DuPont Biofuels | Open Energy Information

    Open Energy Info (EERE)

    Biofuels Jump to: navigation, search Name: DuPont Biofuels Place: Wilmington, Delaware Zip: 19898 Product: Biofuel technology development subsidiary of DuPont. Co-developing...

  11. Exploration and Mining Roadmap

    SciTech Connect (OSTI)

    none,

    2002-09-01

    This Exploration and Mining Technology Roadmap represents the third roadmap for the Mining Industry of the Future. It is based upon the results of the Exploration and Mining Roadmap Workshop held May 10 ñ 11, 2001.

  12. Surface mining

    SciTech Connect (OSTI)

    Not Available

    1989-06-01

    This paper reports on a GAO study of attorney and expert witness fees awarded as a result of litigation brought under the Surface Mining Control and Reclamation Act. As of March 24, 1989, a total of about $1.4 million had been awarded in attorney fees and expenses - about $1.3 subject to the provisions of the Employee Retirement Income Security Act, a comparison of its features with provisions of ERISA showed that the plan differed from ERISA provisions in areas such as eligibility, funding, and contribution limits.

  13. Applications attract DuPont

    SciTech Connect (OSTI)

    Rotman, D.

    1996-08-07

    Scientists at DuPont say they have demonstrated the first chemical processing application for high-temperature superconducting (HTS) magnets. DuPont says the work, which uses a HTS magnet to separate mineral contaminants from kaolin, points to the feasibility of a range of HTS applications in industrial processing, including those involving polymerization. DuPont`s success comes after 10 years of work to commercialize high-temperature superconductors. And while superconductors have lost much of their luster since the late 1980s, the company says it is still bullish on their prospects. {open_quotes}At the moment, there`s no real market for superconductors,{close_quotes} says Alan Lauder, general manager/superconductivity. But, he says, several potentially lucrative applications could be commercialized within the next several years.

  14. DuPont hikes butanediol

    SciTech Connect (OSTI)

    Morris, G.D.L.

    1997-05-14

    Butanediol (BDO) and its derivatives continue to be strong, a positive sign for the many companies planning expansions. DuPont - one of only two global producers not planning capacity additions - has announced that it will discontinue all off-schedule pricing for BDO and two important derivatives, tetrahydrofuran (THF) and polytetramethylene ether glycol (PTMEG). DuPont`s list prices are $1.00/lb fob for BDO, about $1.40/lb for THF, and $2.00/lb for PTMEG. The price adjustment is effective this month or as contracts allow.

  15. ITP Mining: Mining Industry Roadmap for Crosscutting Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roadmap for Crosscutting Technologies ITP Mining: Mining Industry Roadmap for Crosscutting Technologies ccroadmap.pdf (153.71 KB) More Documents & Publications ITP Mining: ...

  16. Utilisation des défibrillateurs

    ScienceCinema (OSTI)

    None

    2011-10-06

    Information faite par le service medical et le service des pompiers sur l'utilisation des defibrillateurs.

  17. Multispectral image feature fusion for detecting land mines

    SciTech Connect (OSTI)

    Clark, G.A.; Fields, D.J.; Sherwood, R.J.

    1994-11-15

    Our system fuses information contained in registered images from multiple sensors to reduce the effect of clutter and improve the the ability to detect surface and buried land mines. The sensor suite currently consists if a camera that acquires images in sixible wavelength bands, du, dual-band infrared (5 micron and 10 micron) and ground penetrating radar. Past research has shown that it is extremely difficult to distinguish land mines from background clutter in images obtained from a single sensor. It is hypothesized, however, that information fused from a suite of various sensors is likely to provide better detection reliability, because the suite of sensors detects a variety of physical properties that are more separate in feature space. The materials surrounding the mines can include natural materials (soil, rocks, foliage, water, holes made by animals and natural processes, etc.) and some artifacts.

  18. Imaging Ahead of Mining

    Office of Energy Efficiency and Renewable Energy (EERE)

    Coal mining is becoming more difficult as machines must extract the coal from deeper, thinner, and more geologically complex coal beds. This type of mining also includes the need to reduce risk and...

  19. Mining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mining Mining Supply and cost management-including energy costs-pose key challenges for U.S. mining companies. The industry has worked with AMO to develop a range of resources for increasing energy efficiency and reducing costs. Analytical Studies & Other Publications Manufacturing Energy and Carbon Footprints provide a mapping of energy use, energy loss, and carbon emissions for selected industry sectors. Mining Industry Energy Bandwidth Study (2007) Documents for historical reference Water

  20. Mountaintop mining update

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2006-07-15

    In a bad year for the US mining industry's safety record and public image, Morehead State University hosted a public meeting titled 'Mountaintop mining, health and safety forum'. This was a balanced event, with representatives from the mining industry as well as activists from the environmental community. A full account is given of the presentations and debate at the forum. 6 photos.

  1. Building Media, Inc. (Du Pont) (Building America Retrofit Alliance...

    Open Energy Info (EERE)

    America Retrofit Alliance) Place: Wilmington, DE Website: www.prweb.comreleasesDuPont References: Building America Retrofit Alliance Press Release1 BMI Website2 DuPont...

  2. DuPont Danisco Cellulosic Ethanol | Open Energy Information

    Open Energy Info (EERE)

    Danisco Cellulosic Ethanol Jump to: navigation, search Name: DuPont Danisco Cellulosic Ethanol Place: Itasca, Illinois Zip: 60143 Product: DuPont Danisco Cellulosic Ethanol is a...

  3. DOE - Fossil Energy: Coal Mining and Transportation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mining Fossil Energy Study Guides Coal Mining and Transportation Coal Miners - One type of mining, called "longwall mining", uses a rotating blade to shear coal away from the ...

  4. DuPont Cellulosic Ethanol Biorefinery Opening

    Broader source: Energy.gov [DOE]

    The DuPont cellulosic ethanol facility, opening in Nevada, Iowa, on October 30, will be the largest cellulosic ethanol plant in the world. The U.S. Department of Energy Bioenergy Technologies Office Director, Jonathan Male, alongside senior government officials, DuPont leaders and staff, and local farmers will attend the grand opening ceremony and plant tour.

  5. ITP Mining: Education Roadmap for Mining Professionals (December 2002)

    Broader source: Energy.gov [DOE]

    A profitable and stable mining industry is vital to U.S. economic and national security. This roadmap serves to educate those professionals in the mining industry.

  6. ITP Mining: Mining Industry of the Future Mineral Processing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of the Future Mineral Processing Technology Roadmap ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap mptroadmap.pdf (293.48 KB) More Documents & ...

  7. About the Uranium Mine Team | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Uranium Mine Team About the Uranium Mine Team Text coming

  8. PRB mines mature

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2007-08-15

    Already seeing the results of reclamation efforts, America's largest surface mines advance as engineers prepare for the future. 30 years after the signing of the Surface Mining Control and Reclamation Act by Jimmy Carter, western strip mines in the USA, especially in the Powder River Basin, are producing more coal than ever. The article describes the construction and installation of a $38.5 million near-pit crusher and overland belt conveyor system at Foundation Coal West's (FCW) Belle Ayr surface mine in Wyoming, one of the earliest PRB mines. It goes on to describe the development by Rio Tinto of an elk conservatory, the Rochelle Hill Conservation Easement, on reclaimed land at Jacobs Ranch, adjacent to the Rochelle Hills. 4 photos.

  9. DuPont Apollo | Open Energy Information

    Open Energy Info (EERE)

    Kong-based thin-film PV module manufacturer that provides solar energy solutions by doing research and development on PV technology and system. References: DuPont Apollo1 This...

  10. Land reclamation beautifies coal mines

    SciTech Connect (OSTI)

    Coblentz, B.

    2009-07-15

    The article explains how the Mississippi Agricultural and Forestry Experiments station, MAFES, has helped prepare land exploited by strip mining at North American Coal Corporation's Red Hills Mine. The 5,800 acre lignite mine is over 200 ft deep and uncovers six layers of coal. About 100 acres of land a year is mined and reclaimed, mostly as pine plantations. 5 photos.

  11. Mine roof support system

    SciTech Connect (OSTI)

    Culley, D.H.

    1982-01-26

    A mine roof support system is disclosed having sets of laterally spaced pairs of elongated support members adapted to be moved into and out of abutting relation with a mine roof. Wheel supported frames extend between and connect adjacent end portions of each pair of support members with adjacent wheel supported frames at the ends of the support members being in spaced tandem relation and connected to each other by connector members. Extensible prop members are connected to and move the wheel supported frames and the elongated support members connected thereto selectively toward and away from the mine roof.

  12. Indonesian coal mining

    SciTech Connect (OSTI)

    2008-11-15

    The article examines the opportunities and challenges facing the Indonesian coal mining industry and how the coal producers, government and wider Indonesian society are working to overcome them. 2 figs., 1 tab.

  13. Coal mine subsidence

    SciTech Connect (OSTI)

    Rahall, N.J.

    1991-05-01

    This paper examines the efficacy of the Department of the Interior's Office of Surface Mining Reclamation and Enforcement's (OSMRE) efforts to implement the federally assisted coal mine subsidence insurance program. Coal mine subsidence, a gradual settling of the earth's surface above an underground mine, can damage nearby land and property. To help protect property owners from subsidence-related damage, the Congress passed legislation in 1984 authorizing OSMRE to make grants of up to $3 million to each state to help the states establish self-sustaining, state-administered insurance programs. Of the 21 eligible states, six Colorado, Indiana, Kentucky, Ohio, West Virginia, and Wyoming applied for grants. This paper reviews the efforts of these six states to develop self-sustaining insurance programs and assessed OSMRE's oversight of those efforts.

  14. N"I. L-S- Rad. Mat. DU

    Office of Legacy Management (LM)

    N"I. L-S- Rad. Mat. DU DU (UF4) Enr. U. Norm. U Thorium 34 Ti Alloy Subtotals Commercial ... Nuclear 1063- 570 1,484,083.2 14' Thorium Bridge- port Brass 762 380 -o- -o- 380 ...

  15. Acid mine drainage: Balancing environmental protection and mining realities

    SciTech Connect (OSTI)

    Sturgill, B.J. Jr.; Poland, K.B.

    1995-12-31

    A major environmental concern leading to the enactment of the Surface Mining Control and Reclamation Act of 1977 (SMCRA) was the degradation of streams and waterways from discharges of acid mine drainage (AMD) resulting from coal mining operations. Although SMCRA and its regulatory scheme contains specific provisions addressing the drainage of acidic water from mine sites, as do various other agencies statutes and regulations, AMD from active and abandoned mines remains a major environmental problem in the Appalachian region. The formation of acidic water during coal mining operations is pervasive and some believe impossible to prevent.

  16. ORS 517 - Mining and Mining Claims | Open Energy Information

    Open Energy Info (EERE)

    - Mining and Mining ClaimsLegal Published NA Year Signed or Took Effect 2013 Legal Citation ORS 517 (2013) DOI Not Provided Check for DOI availability: http:crossref.org...

  17. Mine roof support

    SciTech Connect (OSTI)

    Bollmann, A.

    1982-01-05

    A mine roof support has a base, a supporting prop extending upwardly from the base, an elongated roof-supporting element having one portion supported by the supporting prop and another portion telescopable relative to the one portion toward a mine face and having a free end formed as a housing with a width corresponding to the width of the one portion, and a thrust prop arranged to support the free end section of the telescopable portion of the roof-supporting element and having a roof-side end section which is forcedly displaceable in the housing in direction of elongation of a mine and pivotable in a substantially vertical plane about an axle arranged in the housing.

  18. Review of South American mines

    SciTech Connect (OSTI)

    Not Available

    1984-07-01

    A general overview is presented of the mining activity and plans for South America. The countries which are presented are Columbia, Argentina, Brazil, Venezuela, Chile, Peru, and Bolivia. The products of the mines include coal, bauxite, gold, iron, uranium, copper and numerous other minor materials. A discussion of current production, support and processing facilities, and mining strategies is also given.

  19. Mine roof bolt

    SciTech Connect (OSTI)

    Gillespie, H.D.

    1993-07-27

    A mine roof bolt is described comprising: (a) a length of multi-strand cable defining a bolt shank; (b) a tapered plug comprising a body portion having an internal bore and a frusto-conical outer surface essentially concentric with said internal bore, said tapered plug being mounted about an end of said cable at said internal bore; and (c) an internally tapered drive collar having a frusto-conical inner surface that engages said frusto-conical outer surface of said tapered plug, and having an outer surface defining a drive head that accepts a driving mechanism for rotating and linearly translating said bolt, wherein said tapered plug is mounted on an end of said cable, and said drive collar is pressed down upon said tapered plug, forcing said tapered plug against said cable, such that said drive collar, said tapered plug, and said cable, when fitted tightly together, define said mine roof bolt.

  20. Mine roof support

    SciTech Connect (OSTI)

    Bollmann, A.

    1981-02-24

    A mine roof support has a base and a roof shield pivoted to the base and carrying at its upper end a pivoted cap which is urged upwardly against the mine roof by a hydraulic pit prop reacting between the cap and the base. The lower end of the roof shield is connected to the base by two links each having a pivot cooperating with a pivot on the roof shield, and a pivot cooperating with a pivot on the base. In addition, the base and/or the lower end of the roof shield has an auxiliary for each link and each link has an auxiliary pivot which can be connected with one of the auxiliary pivots of the base or lower end.

  1. Germany knows mining

    SciTech Connect (OSTI)

    2006-11-15

    Whether it is the nuance of precision or robust rock breaking strength, German suppliers have the expertise. Germany has about 120 companies in the mining equipment industry, employing some 16,000 people. The article describes some recent developments of the following companies: DBT, Liebherr, Atlas Copco, BASF, Boart Longyear, Eickhoff, IBS, Maschinenfabrik Glueckauf, Komatsu, TAKRA, Terex O & R, Thyssen Krupp Foerdertechnik and Wirtgen. 7 photos.

  2. DuPont Chemical Vapor Technical Report

    SciTech Connect (OSTI)

    MOORE, T.L.

    2003-10-03

    DuPont Safety Resources was tasked with reviewing the current chemical vapor control practices and providing preventive recommendations on best commercial techniques to control worker exposures. The increased focus of the tank closure project to meet the 2024 Tri-Party Agreement (TPA) milestones has surfaced concerns among some CH2MHill employees and other interested parties. CH2MHill is committed to providing a safe working environment for employees and desires to safely manage the tank farm operations using appropriate control measures. To address worker concerns, CH2MHill has chartered a ''Chemical Vapors Project'' to integrate the activities of multiple CH2MHill project teams, and solicit the expertise of external resources, including an independent Industrial Hygiene expert panel, a communications consultant, and DuPont Safety Resources. Over a three-month time period, DuPont worked with CH2MHill ESH&Q, Industrial Hygiene, Engineering, and the independent expert panel to perform the assessment. The process included overview presentations, formal interviews, informal discussions, documentation review, and literature review. DuPont Safety Resources concluded that it is highly unlikely that workers in the tank farms are exposed to chemicals above established standards. Additionally, the conventional and radiological chemistry is understood, the inherent chemical hazards are known, and the risk associated with chemical vapor exposure is properly managed. The assessment highlighted management's commitment to addressing chemical vapor hazards and controlling the associated risks. Additionally, we found the Industrial Hygiene staff to be technically competent and well motivated. The tank characterization data resides in a comprehensive database containing the tank chemical compositions and relevant airborne concentrations.

  3. Ground control for highwall mining

    SciTech Connect (OSTI)

    Zipf, R.K.; Mark, C.

    2007-09-15

    Perhaps the greatest risk to both equipment and personnel associated with highwall mining is from ground control. The two most significant ground control hazards are rock falls from highwall and equipment entrapment underground. In the central Appalachians, where the majority of highwall mining occurs in the USA, hillseams (or mountain cracks) are the most prominent structure that affects highwall stability. The article discusses measures to minimise the risk of failure associated with hillstreams. A 'stuck' or trapped highwall miner, and the ensuring retrieval or recovery operation, can be extremely disruptive to the highwall mining process. Most entrapment, are due to roof falls in the hole. The options for recovery are surface retrieval, surface excavation or underground recovery. Proper pillar design is essential to maintain highwall stability and prevent entrapments. NIOSH has developed the Analysis of Retreat Mining Pillar stability-Highwall Mining (ARMPS-HWM) computer program to help mine planners with this process. 10 figs.

  4. Fond du Lac Band Leads Climate Resilience Efforts on Lake Superior...

    Energy Savers [EERE]

    Fond du Lac Band Leads Climate Resilience Efforts on Lake Superior Chippewa Indian Reservation Fond du Lac Band Leads Climate Resilience Efforts on Lake Superior Chippewa Indian ...

  5. Financiere des Energies | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Financiere des Energies Place: Saint Contest, France Zip: 14280 Product: Prospects for new production sites and looks for the best...

  6. Hydraulic mining method

    DOE Patents [OSTI]

    Huffman, Lester H.; Knoke, Gerald S.

    1985-08-20

    A method of hydraulically mining an underground pitched mineral vein comprising drilling a vertical borehole through the earth's lithosphere into the vein and drilling a slant borehole along the footwall of the vein to intersect the vertical borehole. Material is removed from the mineral vein by directing a high pressure water jet thereagainst. The resulting slurry of mineral fragments and water flows along the slant borehole into the lower end of the vertical borehole from where it is pumped upwardly through the vertical borehole to the surface.

  7. Education Roadmap for Mining Professionals

    SciTech Connect (OSTI)

    none,

    2002-12-01

    This document represents the roadmap for education in the U.S. mining industry. It was developed based on the results of an Education Roadmap Workshop sponsored by the National Mining Association in conjunction with the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held February 23, 2002 in Phoenix, Arizona.

  8. Proceedings, 26th international conference on ground control in mining

    SciTech Connect (OSTI)

    Peng, S.S.; Mark, C.; Finfinger, G.

    2007-07-01

    Papers are presented under the following topic headings: multiple-seam mining, surface subsidence, coal pillar, bunker and roadway/entry supports, mine design and highwall mining, longwall, roof bolting, stone and hardrock mining, rock mechanics and mine seal.

  9. Measuring mine roof bolt strains

    SciTech Connect (OSTI)

    Steblay, Bernard J.

    1986-01-01

    A mine roof bolt and a method of measuring the strain in mine roof bolts of this type are disclosed. According to the method, a flat portion on the head of the mine roof bolt is first machined. Next, a hole is drilled radially through the bolt at a predetermined distance from the bolt head. After installation of the mine roof bolt and loading, the strain of the mine roof bolt is measured by generating an ultrasonic pulse at the flat portion. The time of travel of the ultrasonic pulse reflected from the hole is measured. This time of travel is a function of the distance from the flat portion to the hole and increases as the bolt is loaded. Consequently, the time measurement is correlated to the strain in the bolt. Compensation for various factors affecting the travel time are also provided.

  10. Mining Industry Energy Bandwidth Study

    SciTech Connect (OSTI)

    none,

    2007-07-01

    The Industrial Technologies Program (ITP) relies on analytical studies to identify large energy reduction opportunities in energy-intensive industries and uses these results to guide its R&D portfolio. The energy bandwidth illustrates the total energy-saving opportunity that exists in the industry if the current processes are improved by implementing more energy-efficient practices and by using advanced technologies. This bandwidth analysis report was conducted to assist the ITP Mining R&D program in identifying energy-saving opportunities in coal, metals, and mineral mining. These opportunities were analyzed in key mining processes of blasting, dewatering, drilling, digging, ventilation, materials handling, crushing, grinding, and separations.

  11. Surface mine regulations complicate reclamation

    SciTech Connect (OSTI)

    Seltz-Patrash, A.

    1980-09-01

    The Surface Mining Control and Reclamation Act of 1977 is a landmark environmental law intended to protect U.S. lands from stripmining effects. However, coal mine operators claim that some SMCRA regulations are misguidedcosting time and money, but yielding no substantial environmental benefit. Unlike other environmental acts, SMCRA details specifically the goals of reclamation and the methods that must be implemented to meet these goals. Coal industry representatives believe that this discourages innovation, promotes inefficiency by ignoring regional differences among sites, and results in unnecessary expense to the industry. Reclamation practices and progress among western coal mining companies are evaluated. (1 map, 5 photos)

  12. Mining and Reclamation Technology Symposium

    SciTech Connect (OSTI)

    None Available

    1999-06-24

    The Mining and Reclamation Technology Symposium was commissioned by the Mountaintop Removal Mining/Valley Fill Environmental Impact Statement (EIS) Interagency Steering Committee as an educational forum for the members of the regulatory community who will participate in the development of the EIS. The Steering Committee sought a balanced audience to ensure the input to the regulatory community reflected the range of perspectives on this complicated and emotional issue. The focus of this symposium is on mining and reclamation technology alternatives, which is one of eleven topics scheduled for review to support development of the EIS. Others include hydrologic, environmental, ecological, and socio-economic issues.

  13. week's Southwest Regional Mine Rescue Competition.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    winning WIPP Blue mine rescue team competes during last week's Southwest Regional Mine Rescue Competition. WIPP UPDATE: April 15, 2016 WIPP Blue Mine Rescue Team Wins Local Competition The Waste Isolation Pilot Plant (WIPP) Blue mine rescue team took top honors last week in the Southwest Regional Mine Rescue Contest, held in Carlsbad, NM. The WIPP Blue outdueled five other teams from the region, including the defending national champion WIPP Red team, to win first place overall in the

  14. Proceedings, 27th international conference on ground control in mining

    SciTech Connect (OSTI)

    Peng, S.S.; Mark, C.; Finfinger, G.

    2008-07-01

    Topics covered include: coal bumps and rockbursts, surface subsidence, surface mining, mine seals, longwall mining, pillars, roof bolting, rock mechanics and standing supports.

  15. Westinghouse Earns Mine Safety Award for Exceptional Underground...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    On September 19, New Mexico State Inspector of Mines Gilbert Miera and the New Mexico Mining Association presented Westinghouse with the "Mine Operator of the Year" award. The...

  16. Shahe Huada Mining Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Shahe Huada Mining Co Ltd Jump to: navigation, search Name: Shahe Huada Mining Co Ltd Place: Hebei Province, China Sector: Biomass Product: Shahe-based private mining company....

  17. Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern...

    Office of Environmental Management (EM)

    Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern Colorado Mined Land Reclamation on DOE's Uranium Lease Tracts, Southwestern Colorado Mined Land Reclamation on...

  18. ITP Mining: The Future Begins with Mining- A Vision of the Mining Industry of the Future

    Broader source: Energy.gov [DOE]

    This vision document details long-term goals and objectives for the mining industry. Stemming from this vision document, targeted technology roadmaps were developed that describe pathways of research to achieve the vision goals.

  19. Crisis in American mining

    SciTech Connect (OSTI)

    Not Available

    1984-05-01

    The crisis in American mining is discussed. The discussion focuses on the outlook for coal in the overall energy picture. Because of the Arab oil embargo of 1973, the Iranian disruption of 1979, and the tenfold increase in oil prices over the past decade, radical changes have taken place in energy supply and demand patterns. Two of the most important of these changes relate to investment. First, large investments have been made in energy-efficient plants, equipment, buildings, and vehicles. Their effect will restrain energy demand growth for the foreseeable future. Second, investments have been made in fuel-switching, from oil to coal and nuclear power. As a result the oil demand at the end of this century will be at approximately the same level as it is today. Natural gas demand is also likely to be flat. Coal demand, on the other hand, is expected to increase steadily over the long term. Recent conditions in the coal industry are reviewed, and a specific 10-year forecast is given.

  20. Mine roof supporting system

    SciTech Connect (OSTI)

    Curry, P.F.

    1981-06-23

    A stabilizing arrangement for mine roof support systems of the type in which a series of support units, each including a transverse beam supported at opposite ends by extensible props, are interconnected by extensible struts in a manner to be selfadvancing by alternate retraction of support units from a roof supporting condition and extension of the struts to advance such retracted units relative to others of such units which are in an extended roof engaging condition. The connection of each prop to the beam in a given unit is pivotal to allow deflection of the beam and props of a supporting unit from a normal perpendicular relationship under load. The stabilizing means restores the props and beam to a normal perpendicular relationship for advancing movement of each support unit. The supporting units are further stabilized relative to the struts by prop supporting brackets permitting canting movement of the props from a perpendicular relationship with respect to the struts but maintaining the props in a generally upright position for unit advance.

  1. DuPont Technology Breaks Away From Glass

    Broader source: Energy.gov [DOE]

    Delaware-based DuPont is working to develop ultra-thin moisture protective films for photovoltaic panels — so thin they’re about 1,000 times thinner than a human hair.

  2. ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry (December 2002)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy and the National Mining Association are working in partnership to implement the Mining Industry of the Future strategy.

  3. Survey of nine surface mines in North America. [Nine different mines in USA and Canada

    SciTech Connect (OSTI)

    Hayes, L.G.; Brackett, R.D.; Floyd, F.D.

    1981-01-01

    This report presents the information gathered by three mining engineers in a 1980 survey of nine surface mines in the United States and Canada. The mines visited included seven coal mines, one copper mine, and one tar sands mine selected as representative of present state of the art in open pit, strip, and terrace pit mining. The purpose of the survey was to investigate mining methods, equipment requirements, operating costs, reclamation procedures and costs, and other aspects of current surface mining practices in order to acquire basic data for a study comparing conventional and terrace pit mining methods, particularly in deeper overburdens. The survey was conducted as part of a project under DOE Contract No. DE-AC01-79ET10023 titled The Development of Optimal Terrace Pit Coal Mining Systems.

  4. Surface mining: State management of abandoned mine land funds

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    The Surface Mining Control and Reclamation Act of 1977 promotes the reclamation of areas severely damaged in the past by coal mining operations. GAO reviewed the reclamation programs in Colorado, Kentucky, Pennsylvania, West Virginia, and Wyoming and found that they implemented financial control procedures and practices to ensure that the expenditures of reclamation funds are proper. Only one state, however, is complying with all related grant payment, audit, and inventory requirements. The states are generally reclaiming eligible, high priority projects as required under the act and are managing their reclamation projects in compliance with federal requirements.

  5. Coal mine methane global review

    SciTech Connect (OSTI)

    2008-07-01

    This is the second edition of the Coal Mine Methane Global Overview, updated in the summer of 2008. This document contains individual, comprehensive profiles that characterize the coal and coal mine methane sectors of 33 countries - 22 methane to market partners and an additional 11 coal-producing nations. The executive summary provides summary tables that include statistics on coal reserves, coal production, methane emissions, and CMM projects activity. An International Coal Mine Methane Projects Database accompanies this overview. It contains more detailed and comprehensive information on over two hundred CMM recovery and utilization projects around the world. Project information in the database is updated regularly. This document will be updated annually. Suggestions for updates and revisions can be submitted to the Administrative Support Group and will be incorporate into the document as appropriate.

  6. WIPP Takes Second in Mine Rescue Competition | Department of Energy

    Office of Environmental Management (EM)

    Takes Second in Mine Rescue Competition WIPP Takes Second in Mine Rescue Competition June 30, 2014 - 12:00pm Addthis WIPP Mine Rescue Red Team members’ actions are evaluated during a simulated mine rescue disaster. WIPP Mine Rescue Red Team members' actions are evaluated during a simulated mine rescue disaster. WIPP mine rescue team members simulate the proper first aid response to stabilize injuries. WIPP mine rescue team members simulate the proper first aid response to stabilize

  7. MINES ParisTech | Open Energy Information

    Open Energy Info (EERE)

    it. MINES ParisTech was created in 1783, when the exploitation of mines was a high-technology industry. Quite naturally, the skills of the School followed the development of...

  8. Logistics background study: underground mining

    SciTech Connect (OSTI)

    Hanslovan, J. J.; Visovsky, R. G.

    1982-02-01

    Logistical functions that are normally associated with US underground coal mining are investigated and analyzed. These functions imply all activities and services that support the producing sections of the mine. The report provides a better understanding of how these functions impact coal production in terms of time, cost, and safety. Major underground logistics activities are analyzed and include: transportation and personnel, supplies and equipment; transportation of coal and rock; electrical distribution and communications systems; water handling; hydraulics; and ventilation systems. Recommended areas for future research are identified and prioritized.

  9. Mine roof geology information system

    SciTech Connect (OSTI)

    Peng, S.S.; Sasaoka, T.; Tang, D.X.; Wilson, Y.; Wilson, G.

    2005-05-01

    A project sponsored by the US Department of Energy under the Industry of Future (Mining) program was initiated five years ago. In this project a patented drill control unit (DCU) installed DIN. the J.H. Flecher & Co.'s roof bolter was used to record the drilling parameter for experiments conducted in the mines and laboratory. Today, the drilling parameters have been recorded for more than 1,000 roof bolt holes. This article summarizes the results to date including the methods for determining quantitatively the location of voids/fractures and estimation of roof rock strength from the recorded roof bolter drilling parameters. 8 figs., 2 tabs.

  10. Turnaround team revitalizes mining operations

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2005-11-01

    Starting from scratch, the Broe Companies' Century Coal trains the next generation. The article describes how the newly created Century Coal LLC, controlled by Denver-based Broe Companies investment firm, is rebuilding and expanding its highwall mining operations, increasing production from a current 1 million tons to 5 to 6 million tons in 2006 and 2007. The company has a $100,000 outreach program with 95% of these funds going to local communities. Present coal mining operations are spread around Bell, Clay, Harlan Knox and Leslie Counties. A priority is the renovation of the WenLar preparation plant in Bell County. 5 photos.

  11. UK mining invests, suppliers profit

    SciTech Connect (OSTI)

    2009-04-15

    In the midst of a major economic crisis in the United Kingdom, equipment suppliers have been reporting a number of considerable purchases by British coal mining companies. In December 2008, Liebherr-Great Britain delivered the first two of four Rq350 Litronic hydraulic excavators for use at the Broken Cross opencast coal site in Lanarkshire, Scotland. Ten Terex TR100 rigid haulers were delivered to the site in late 2008. Hatfield Colliery at Stainforth, South Yorkshire, has been reopened by PowerFuel. The main equipment for two longwall faces was supplied by Joy Mining Machinery UK Ltd. 2 photos.

  12. 2009 underground/longwall mining buyer's guide

    SciTech Connect (OSTI)

    2009-06-15

    The guide lists US companies supplying equipment and services to underground mining operations. An index by product category is included.

  13. 2008 Underground/Longwall Mining Buyer's Guide

    SciTech Connect (OSTI)

    2008-06-15

    The guide lists US companies supplying equipment and services to mines. An index by product category is included.

  14. Mining Industry Roadmap for Crosscutting Technologies

    SciTech Connect (OSTI)

    none,

    1999-05-01

    Technology roadmaps are envisioned in several areas, and begin with a Mining Industry Roadmap for Crosscutting Technologies.

  15. Program of mining research, 1998--1999

    SciTech Connect (OSTI)

    1998-12-31

    The paper contains: Reflections on 1998; Project summaries; Noise; Injury prevention, ergonomics, and human factors; Surface, sand and gravel, and stone mines; Hazard detection and warning devices; Ground control -- metal/nonmetal mines; Ground control -- coal mines; Explosion and fire detection and suppression; Methane detection; Electrical hazards; Emerging technologies; Surveillance; Construction; Training and education; and Communication activity.

  16. E I DuPont De Nemours & Co | Open Energy Information

    Open Energy Info (EERE)

    E I DuPont De Nemours & Co Jump to: navigation, search Name: E I DuPont De Nemours & Co Place: Tennessee Website: www.dupont.com Twitter: @dupontnews Facebook: https:...

  17. E I DuPont De Nemours & Co (Texas) | Open Energy Information

    Open Energy Info (EERE)

    E I DuPont De Nemours & Co (Texas) Jump to: navigation, search Name: E I DuPont De Nemours & Co Place: Texas References: EIA Form EIA-861 Final Data File for 2010 - File220101...

  18. Henan Mingdu Wind Power Co Ltd aka He Nan Ming Du Feng Dian Limited...

    Open Energy Info (EERE)

    Mingdu Wind Power Co Ltd aka He Nan Ming Du Feng Dian Limited Company Jump to: navigation, search Name: Henan Mingdu Wind Power Co Ltd (aka He Nan Ming Du Feng Dian Limited...

  19. Soci t d exploitation du parc olien de Mont d H z cques SARL...

    Open Energy Info (EERE)

    Soci t d exploitation du parc olien de Mont d H z cques SARL Jump to: navigation, search Name: Socit d'exploitation du parc olien de Mont d'Hzcques SARL Place:...

  20. DuPont's Journey to Build a Global Cellulosic BioFuel Business...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DuPont's Journey to Build a Global Cellulosic BioFuel Business Enterprise DuPont's Journey to Build a Global Cellulosic BioFuel Business Enterprise Plenary I: Progress in Advanced ...

  1. DuPont’s Journey to Build a Global Cellulosic BioFuel Business Enterprise

    Office of Energy Efficiency and Renewable Energy (EERE)

    Plenary I: Progress in Advanced Biofuels DuPont’s Journey to Build a Global Cellulosic BioFuel Business Enterprise William Provine, Director–Science and Technology External Affairs, DuPont

  2. Glionitrin A, an antibiotic-antitumor metabolite derived from competitive interaction between abandoned mine microbes

    SciTech Connect (OSTI)

    Park, H.B.; Kown, H.C.; Lee, C.H.; Yang, H.O.

    2009-02-15

    The nutrient conditions present in abandoned coal mine drainages create an extreme environment where defensive and offensive microbial interactions could be critical for survival and fitness. Coculture of a mine drainage-derived Sphingomonas bacterial strain, KMK-001, and a mine drainage-derived Aspergillus fumigatus fungal strain, KMC-901, resulted in isolation of a new diketopiperazine disulfide, glionitrin A (1). Compound 1 was not detected in monoculture broths of KMK-001 or KMC-901. The structure of 1, a (3S,10aS) diketopiperazine disulfide containing a nitro aromatic ring, was based on analysis of MS, NMR, and circular dichroism spectra and confirmed by X-ray crystal data. Glionitrin A displayed significant antibiotic activity against a series of microbes including methicillin-resistant Staphylococcus aureus. An in vitro MTT cytotoxicity assay revealed that 1 had potent submicromolar cytotoxic activity against four human cancer cell lines: HCT-116, A549, AGS, and DU145. The results provide further evidence that microbial coculture can produce novel biologically relevant molecules.

  3. The Rio Tinto Mine: A volunteer clean-up success story

    SciTech Connect (OSTI)

    Schwaegler, D.P.; Corser, P.G.; Aho, G.D.

    1999-07-01

    Underground copper mining at the Rio Tinto mine in northern Nevada commenced in 1932 and continued intermittently for approximately forty years. Since 1975 the site has been essentially inactive. Mine operations included placement of tailings generated from ore processing in the Mill Creek drainage. In 1993, due to concerns about environmental damage to surrounding surface waters, four of the previous owners and operators of the site jointly formed the Rio Tinto Working Group (RTWG) to remediate the site in cooperation with the State of Nevada, Department of Conservation and Natural Resource and the Division of Environmental Protection (NDEP). The Rio Tinto Working Group consists of the Atlantic Richfield Company, Cleveland Cliffs Iron Company, E.I. DuPont de Nemours and Company, and Cominco American Inc., The regulatory and technical approach taken by the RTWG to achieve their objective of proactively implementing remedial measures at the site, rather than following the CERCLA process, are discussed. The steps included preparing an 18-element remedial program to be completed at the site and negotiating an Administrative Order on Consent (AOC) with the State of Nevada, which included a deferral from EPA for listing of the site on the NPL list. By entering into a cooperative relationship with the NDEP and avoiding the CERCLA process, the Rio Tinto Working Group was able to fast track site investigation and remedial designs, leading to a timely start up of remedial construction activities.

  4. The quest data mining system

    SciTech Connect (OSTI)

    Agrawal, R.; Mehta, M.; Shafer, J.; Srikant, R.

    1996-12-31

    The goal of the Quest project at the IBM Almaden Research center is to develop technology to enable a new breed of data-intensive decision-support applications. This paper is a capsule summary of the current functionality and architecture of the Quest data mining System.

  5. Corner-cutting mining assembly

    DOE Patents [OSTI]

    Bradley, John A.

    1983-01-01

    A mining assembly includes a primary rotary cutter mounted on one end of a support shaft and four secondary rotary cutters carried on the same support shaft and positioned behind the primary cutters for cutting corners in the hole cut by the latter.

  6. Robot to the Mine Rescue

    Broader source: Energy.gov [DOE]

    To increase the speed of rescue efforts, scientists and engineers at the Energy Department’s Sandia National Laboratories recently developed a new robot, called the Gemini-Scout Mine Rescue Robot, that quickly finds dangers and provides relief to trapped miners.

  7. Mining into the new millennium

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2009-06-15

    After more than 3 years of production and a billion tons of coal shipped, Foundation Coal West, a subsidiary of Foundation Coal Holding Inc., continues to operate two of the original surface mines in Wyoming's Powder River Basin. The article describes equipment (conveyors, trucks, surface miners etc.) deployed at Belle Ayr and Eagle Butte PRB operations. 3 photos.

  8. Corner-cutting mining assembly

    DOE Patents [OSTI]

    Bradley, J.A.

    1981-07-01

    This invention resulted from a contract with the United States Department of Energy and relates to a mining tool. More particularly, the invention relates to an assembly capable of drilling a hole having a square cross-sectional shape with radiused corners. In mining operations in which conventional auger-type drills are used to form a series of parallel, cylindrical holes in a coal seam, a large amount of coal remains in place in the seam because the shape of the holes leaves thick webs between the holes. A higher percentage of coal can be mined from a seam by a means capable of drilling holes having a substantially square cross section. It is an object of this invention to provide an improved mining apparatus by means of which the amount of coal recovered from a seam deposit can be increased. Another object of the invention is to provide a drilling assembly which cuts corners in a hole having a circular cross section. These objects and other advantages are attained by a preferred embodiment of the invention.

  9. Spatial and Spatiotemporal Data Mining: Recent Advances

    SciTech Connect (OSTI)

    Shekhar, Shashi; Vatsavai, Raju; Celik, Mete

    2008-01-01

    Explosive growth in geospatial data and the emergence of new spatial technologies emphasize the need for automated discovery of spatial knowledge. Spatial data mining is the process of discovering interesting and previously unknown, but potentially useful patterns from large spatial databases. The complexity of spatial data and intrinsic spatial relationships limits the usefulness of conventional data mining techniques for extracting spatial patterns. In this chapter we explore the emerging field of spatial data mining, focusing on four major topics: prediction and classification, outlier detection, co-location mining, and clustering. Spatiotemporal data mining is also briefly discussed.

  10. Longwall mining of thin seams

    SciTech Connect (OSTI)

    Curth, E A

    1981-01-01

    Thin seam operations pose a challenge to the ingenuity of mining engineers to overcome the factor of human inconvenience in the restricted environment and associated high cost production. Surprisingly, low seam longwalls in the Federal Republic of Germany in an average thickness of 35 in. and dipping less than 18/sup 0/ come close to achieving the average production rate of all German longwall operations. They are all plow faces, and a consistent production of 3300 tons per day and a productivity of 40 tons per man shift are reported from one of the thin seam longwalls. These results were attained by reliable high-capacity equipment and roof support by shields that can be collapsed to as low as 22 inches. Maximum mining height for plow operated faces lies at 31.5 inches. Technology for mechanized mining of flat lying coalbeds less than 31.5 inches in thickness without rock cutting is not available, and firmness of coal, undulation of the strata, coalbed thickness variation, and the necessity of cutting rock, particularly through faults, set limits to plow application. The in-web shearer can be used in firm coal to a minimum mining height of 40 inches, and a daily production of 1650 to 2200 tons is reported from a longwall in the Saar district of Germany equipped with such a shearer and shields. Numerous in-web shearers are employed in the United Kingdom; reports as to their success are contradictory. Also, experience in the United States, though limited, has been negative. The steady increase in output from single drum shearer faces in Pennsylvania is a remarkable achievement, and occasional record breaking peaks in production indicate the potential of such mining. Technology development for the future is discussed.

  11. Mines in the Four Corners anticipate growth

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2008-02-15

    Productive mines in the southwest deplete reserves, while the government drags its heels on new power projects. Production in Arizona and New Mexico has fallen 18% over the last four years to 34.1 million tons. With Chevron Mining's McKinley mine rapidly depleting its reserves the industry will continue to contract. In the last three years at least three large mines in the Four Corners have terminated operations. Three others remain captive operations: BHP Billiton's San Juan Underground and Navajo Surface operations and Peabody Energy's Kayenta surface mine. In 2006 the Black Mesa mine stopped producing coal. These four mines are isolated from the national railways. Peabody's new El Segundo surface mine near Grants, NM is increasing production. If the planned $3 billion Desert Rock coal-fired power plant is built this will present a new market for the Navajo mine. The article gives details about the state of the aforementioned mines and of the new King II coal mine on the northern periphery of the San Juan basin and discusses the state of plans for the Desert Rock Energy Project. 5 photos.

  12. Jump start: DuPont exports its energy management program

    SciTech Connect (OSTI)

    1994-11-23

    In August 1993, DuPont launched its innovative Jump Start program, which called for managers in its 25 largest plants to carry out a 120-day crash effort to find ways to reduce energy use at their facilities. The effort produced ideas that will result in $21.5 million in energy savings over six years, exceeding DuPont`s target. It also kicked off a longer-term program the company hopes will cut as much as $300 million, or 15% from energy bills through 2000.

  13. Mining Industry of the Future Vision: The Future Begins with Mining

    SciTech Connect (OSTI)

    none,

    1998-09-01

    The Mining Industry of the Future was started in June 1998 when the Chairman of the National Mining Association and the Secretary of Energy entered into a Compact to pursue a collaborative technology research partnership. After the Compact signing, the mining industry developed its vision document, The Future Begins with Mining, A Vision of the Mining Industry of the Future, in September 1998. This vision document lists long-term goals for the mining industry. Stemming from this vision document, targeted technology roadmaps were developed that describe pathways of research to achieve the vision goals.

  14. Mining machine having vibration sensor

    SciTech Connect (OSTI)

    Peterson, C.R.

    1987-04-07

    This patent describes a mining machine having means for sensing property variations of the materials associated with a seam of a mine comprising: a cutting tool including a member rotatable about an axis, at least one cutter carried by the rotatable member at a point spaced from the axis for cutting material from the seam, a conductor rod carried by the rotatable member and held in releasable engagement with the cutter, the rod extending to the axis of the rotatable member to conduct to the axis, strain waves which are induced by variations in cutter vibration as the cutter encounters property variations of the materials associated with the seam, and a transducer located at the axis of the rotatable member in communication with the conductor rod to convert the strain waves in the rod to electric signals.

  15. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2004-03-01

    A comprehensive mine-wide, two-way wireless voice and data communication system for the underground mining industry was developed. The system achieves energy savings through increased productivity and greater energy efficiency in meeting safety requirements within mines. The mine-wide system is comprised of two interfaced subsystems: a through-the-earth communications system and an in-mine communications system. The mine-wide system permits two-way communication among underground personnel and between underground and surface personnel. The system was designed, built, and commercialized. Several systems are in operation in underground mines in the United States. The use of these systems has proven they result in considerable energy savings. A system for tracking the location of vehicles and people within the mine was also developed, built and tested successfully. Transtek's systems are being used by the National Institute of Occupational Safety and Health (NIOSH) in their underground mine rescue team training program. This project also resulted in a spin-off rescue team lifeline and communications system. Furthermore, the project points the way to further developments that can lead to a GPS-like system for underground mines allowing the use of autonomous machines in underground mining operations, greatly reducing the amount of energy used in these operations. Some products developed under this program are transferable to applications in fields other than mining. The rescue team system is applicable to use by first responders to natural, accidental, or terrorist-caused building collapses. The in-mine communications system can be installed in high-rise buildings providing in-building communications to security and maintenance personnel as well as to first responders.

  16. Data mining and visualization techniques

    DOE Patents [OSTI]

    Wong, Pak Chung; Whitney, Paul; Thomas, Jim

    2004-03-23

    Disclosed are association rule identification and visualization methods, systems, and apparatus. An association rule in data mining is an implication of the form X.fwdarw.Y where X is a set of antecedent items and Y is the consequent item. A unique visualization technique that provides multiple antecedent, consequent, confidence, and support information is disclosed to facilitate better presentation of large quantities of complex association rules.

  17. Injury experience in coal mining, 1986

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1986. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 1 fig., 46 tabs.

  18. Injury experience in coal mining, 1987

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1987. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 tabs.

  19. Injury experience in coal mining, 1988

    SciTech Connect (OSTI)

    Not Available

    1989-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1988. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 23 tabs.

  20. Injury experience in metallic mineral mining, 1992

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  1. Injury experience in stone mining, 1992

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of stone mining in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  2. Injury experience in metallic mineral mining, 1991

    SciTech Connect (OSTI)

    Not Available

    1993-10-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1991. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  3. Injury experience in metallic mineral mining, 1987

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1987. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 44 tabs.

  4. Injury experience in coal mining, 1990

    SciTech Connect (OSTI)

    1991-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  5. Injury experience in metallic mineral mining, 1990

    SciTech Connect (OSTI)

    Not Available

    1991-12-31

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  6. Injury experience in coal mining, 1992

    SciTech Connect (OSTI)

    Reich, R.B.; Hugler, E.C.

    1994-05-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  7. Injury experience in metallic mineral mining, 1988

    SciTech Connect (OSTI)

    Not Available

    1989-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States of 1988. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 refs.

  8. Injury experience in metallic mineral mining, 1990

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  9. Injury experience in stone mining, 1990

    SciTech Connect (OSTI)

    Not Available

    1990-12-31

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of stone mining in the united States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  10. Injury experience in coal mining, 1989

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    This Mine and Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1989. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 tabs.

  11. Injury experience in stone mining, 1986

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of stone mining in the United States for 1986. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 tabs.

  12. Injury experience in metallic mineral mining, 1986

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1986. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, natured of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 tabs.

  13. Injury experience in metallic mineral mining, 1989

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the the United States for 1989. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 tabs.

  14. Injury experience in stone mining, 1989

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail occupational injury and illness experience of stone mining in the United States for 1989. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 tabs.

  15. ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap

    Office of Energy Efficiency and Renewable Energy (EERE)

    In June 1998, the Chairman of the National Mining Association and the Secretary of energy entered into a Compact to pursue a collaborative technology research partnership, the Mining Industry of the Future.

  16. ORS 517.705 Exploration Permit Regulations for Mining and Mining...

    Open Energy Info (EERE)

    .705 Exploration Permit Regulations for Mining and Mining Claims Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: ORS 517.705...

  17. Bauma returns with a large mining component

    SciTech Connect (OSTI)

    Casteel, K.

    2007-04-15

    The world's largest construction trade fair is also a major mining show covering equipment from excavation to product load out. This comprehensive preview of the bauma 2007 exposition (23-29 April 2007) describes construction equipment which will be displayed, concentrating on mining equipment. It includes drilling equipment; earthmoving, excavation and grading machinery; loading and hauling machines; underground mining equipment; crushing and screening equipment; conveyors; and pumps. 25 photos.

  18. Injury experience in coal mining, 1984

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    This report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1984. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report.

  19. Des Moines Area Community College | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information Des Moines Area Community College Spotlights Home DOE Applauds Des Moines Area Community College Science and Technical Programs Des Moines Area Community College Des Moines Area Community College Des Moines, Iowa Agri/Natural Resources Biology Biomass Operations Biotechnology Environmental Science Information Technology Manufacturing Technology Microcomputers Civil Engineering Pre-Medical Telecommunications Wind Turbines Resource Links About Library

  20. WIPP Mine Rescue Team Wins Colorado Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Colorado Competition CARLSBAD, N.M., July 11, 2001 - The Silver Mine Rescue Team from the U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) placed first in the recent Western Regional Mine Rescue Competition. It was the first victory by a WIPP team in this competition in five years. The Colorado State Mine Inspector's Office, in conjunction with the Colorado School of Mines, hosted the Western Regional, June 12-14 in Golden, Colorado. The WIPP Silver Team defeated seven teams,

  1. Injury experience in coal mining, 1985

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in details the occupational injury and illness experience of coal mining in the United States for 1985. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. Data used in compiling this report were reported by operators of coal mines and preparation plants on a mandatory basis as required under the Federal Mine Safety and Health Act of 1977, Public Law 91-173 as amended by Public Law 95-164. Since January 1, 1978, operators of mines or preparation plants or both which are subject to the act have been required under 30 CFR, Part 50 to submit reports of injuries, occupational illnesses, and related data. 3 figs., 46 tabs.

  2. Injury experience in coal mining, 1991

    SciTech Connect (OSTI)

    Not Available

    1991-12-31

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1991. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. Data used in compiling this report were reported by operators of coal mines and preparation plants on a mandatory basis as required under the Federal Mine Safety and Health Act of 1977, Public Law 91-173,as amended by Public Law 95-164. Since January 1, 1978, operators of mines or preparation plants or both which are subject to the Act have been required under 30 CFR, Part 50, to submit reports of injuries, occupational illnesses, and related data.

  3. Injury experience in metallic mineral mining, 1985

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of metallic mineral mining in the United States for 1985. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. Data used in compiling this report were reported by operators of metallic mineral mines and preparation plants on a mandatory basis as required under the Federal Mine Safety and Health Act of 1977, Public Law 91-173 as amended by Law 95-164. Since January 1, 1978, operators of mines or preparation plants or both which are subject to the Act have been required under 30 CFR, Part 50, to submit reports of injuries, occupational illnesses, and related data. 3 figs., 46 tabs.

  4. Injury experience in coal mining, 1980

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1980. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injuried, nature of injury, occupation, and bituminous or anthracite coal. Correlative information on employment, worktime, and operating activity also is presented. For ease of correlation between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of the report. Data used in compiling this report were reported by operators of coal mines and preparation plants on a mandatory basis as required under the Federal Mine Safety and Health Act of 1977, Public Law 91-173 as amended by Public Law 95-164. Since January 1, 1978, operators of mines or preparation plants or both which are subject to the Act have been required under 30 CFR, Part 50 to submit reports of injuries, occupational illnesses, and related data. Only data reported by operators are utilized in this report. The statistical measures for injury experience adopted by MSHA in 1978 compare closely with the measures used in the Office of Occupational Safety and Health Statistics, Bureau of Labor Statistics, US Department of Labor. Therefore, beginning with 1978 data the mining industry can be compared on a standard basis with other United States industries.

  5. Mining Industry Profile | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    These mined minerals include coal, metals such as iron, copper, or zinc, and industrial ... Furthermore, coal accounts for nearly 50% of electric power generated in the United ...

  6. Data mining for ontology development.

    SciTech Connect (OSTI)

    Davidson, George S.; Strasburg, Jana; Stampf, David; Neymotin,Lev; Czajkowski, Carl; Shine, Eugene; Bollinger, James; Ghosh, Vinita; Sorokine, Alexandre; Ferrell, Regina; Ward, Richard; Schoenwald, David Alan

    2010-06-01

    A multi-laboratory ontology construction effort during the summer and fall of 2009 prototyped an ontology for counterfeit semiconductor manufacturing. This effort included an ontology development team and an ontology validation methods team. Here the third team of the Ontology Project, the Data Analysis (DA) team reports on their approaches, the tools they used, and results for mining literature for terminology pertinent to counterfeit semiconductor manufacturing. A discussion of the value of ontology-based analysis is presented, with insights drawn from other ontology-based methods regularly used in the analysis of genomic experiments. Finally, suggestions for future work are offered.

  7. Self advancing mine roof supports

    SciTech Connect (OSTI)

    Seddon, J.; Jones, F.

    1985-03-19

    A self-advancing mine-roof-support for use in or aligned with a main roadway or gate has a floor-engaging part and a roof engaging part spaced apart by extensible load-bearing prop or jack means, and engagement means for a face-conveyor and a transversely acting transfer conveyor whereby their relative positions are constrained to facilitate discharge of mineral from one conveyor to the other. The engagement means for the face conveyor comprises sliding anchor beams that assure maintenance of the relative attitudes of the support and the face conveyor and the transfer conveyor is held fore and aft of the support.

  8. Community Environmental Response Facilitation Act (CERFA) report. Fort Des Moines, Des Moines, Iowa. Final report

    SciTech Connect (OSTI)

    Young, B.; Rausch, K.; Kang, J.

    1994-04-01

    This report presents the results of the Community Environmental Response Facilitation Act (CERFA) investigation conducted by The Earth Technology Corporation (TETC) at the Fort Des Moines, a U.S. Government property selected for closure by the Base Realignment and Closure (BRAC) Commission. Under CERFA Federal agencies are required to identify real property that can be immediately reused and redeveloped. Satisfying this objective requires the identification of real property where no hazardous substances or petroleum products, regulated by the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), were stored for one year or more, known to have been released, or disposed. Fort Des Moines is a 53.28-acre site located in Polk County, Iowa, within the city limits of Des Moines. The installation's primary mission is to provide support and shelter for the U.S. Army Reserve. Activities associated with the property that have environmental significance are photographic processing, vehicle maintenance, printing, and fuel storage. TETC reviewed existing investigation documents; U.S. Environmental Protection Agency (USEPA), State, and county regulatory records; environmental data bases; and title documents pertaining to Fort Des Moines during this investigation. In addition, TETC conducted interviews and visual inspections of Fort Des Moines as well as visual inspections and data base searches for the surrounding properties. Information in this CERFA Report was current as of April 1994.

  9. Colorado School of Mines - Colorado Energy Research Institute...

    Open Energy Info (EERE)

    Mines - Colorado Energy Research Institute Jump to: navigation, search Name: Colorado School of Mines - Colorado Energy Research Institute Address: 1500 Illinois Street Place:...

  10. Montana Bureau of Mines and Geology Website | Open Energy Information

    Open Energy Info (EERE)

    Web Site: Montana Bureau of Mines and Geology Website Abstract Provides access to digital information on Montana's geology. Author Montana Bureau of Mines and Geology...

  11. Longwall mining thrives in Colorado's North Fork Valley

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2006-08-15

    With mining units poised for record-setting capacity and rail service restored, these mines in Colorado's North Fork valley are ready to cut coal. 4 photos.

  12. Inner Mongolia Fengwei New Energy Mining Co Ltd | Open Energy...

    Open Energy Info (EERE)

    Fengwei New Energy Mining Co Ltd Jump to: navigation, search Name: Inner Mongolia Fengwei New Energy Mining Co Ltd Place: Inner Mongolia Autonomous Region, China Product:...

  13. Zhangjiajie Guinie Mining Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Zhangjiajie Guinie Mining Co Ltd Jump to: navigation, search Name: Zhangjiajie Guinie Mining Co Ltd Place: Zhangjiajie, Hunan Province, China Product: Miner, refiner and processor...

  14. Mines Welcomes Middle School Students | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Science and Technology. The students spent the day at Mines to learn about Earth, energy, the environment, critical materials and mining. The students enjoyed a chemistry show ...

  15. Coal mine directory: United States and Canada

    SciTech Connect (OSTI)

    2004-07-01

    The directory gives a state-by-state listing of all US and Canadian coal producers. It contains contact information as well as the type of mine, production statistics, coal composition, transportation methods etc. A statistical section provides general information about the US coal industry, preparation plants, and longwall mining operations.

  16. Statistically significant relational data mining :

    SciTech Connect (OSTI)

    Berry, Jonathan W.; Leung, Vitus Joseph; Phillips, Cynthia Ann; Pinar, Ali; Robinson, David Gerald; Berger-Wolf, Tanya; Bhowmick, Sanjukta; Casleton, Emily; Kaiser, Mark; Nordman, Daniel J.; Wilson, Alyson G.

    2014-02-01

    This report summarizes the work performed under the project (3z(BStatitically significant relational data mining.(3y (BThe goal of the project was to add more statistical rigor to the fairly ad hoc area of data mining on graphs. Our goal was to develop better algorithms and better ways to evaluate algorithm quality. We concetrated on algorithms for community detection, approximate pattern matching, and graph similarity measures. Approximate pattern matching involves finding an instance of a relatively small pattern, expressed with tolerance, in a large graph of data observed with uncertainty. This report gathers the abstracts and references for the eight refereed publications that have appeared as part of this work. We then archive three pieces of research that have not yet been published. The first is theoretical and experimental evidence that a popular statistical measure for comparison of community assignments favors over-resolved communities over approximations to a ground truth. The second are statistically motivated methods for measuring the quality of an approximate match of a small pattern in a large graph. The third is a new probabilistic random graph model. Statisticians favor these models for graph analysis. The new local structure graph model overcomes some of the issues with popular models such as exponential random graph models and latent variable models.

  17. Injury experience in stone mining, 1987

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of stone mining in the United States for 1987. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 tabs.

  18. Des Plaines, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    10th congressional district.12 Registered Energy Companies in Des Plaines, Illinois Gas Technology Institute (Partnership for Advanced Residential Retrofit) NARI National...

  19. Laboratoire de Physique des Interfaces et Couches Minces LPICM...

    Open Energy Info (EERE)

    Laboratoire de Physique des Interfaces et Couches Minces (LPICM) Place: Palaiseau, France Zip: 91128 Sector: Carbon Product: Research department of the Ecole Polytechnique in...

  20. Sécurité au-delà des mythes et des croyances

    SciTech Connect (OSTI)

    2010-06-24

    Présentation orale en français, support visuel en français et en anglais. La pire des failles de sécurité est l'impression de sécurité. Le décalage entre la compréhension que l’on a des technologies utilisées, et leurs potentiels réels, ainsi que l'impact potentiellement négatif qu'elles peuvent avoir sur nos vies, n'est pas toujours compris, ou pris en compte par la plupart d'entre-nous. On se contente de nos perceptions pour ne pas avoir à se confronter à la réalité... Alors qu'en est-il vraiment ? En matière de sécurité qui de l'humain ou des technologies a le contrôle ?

  1. Sécurité au-delà des mythes et des croyances

    ScienceCinema (OSTI)

    None

    2011-10-06

    Présentation orale en français, support visuel en français et en anglais. La pire des failles de sécurité est l'impression de sécurité. Le décalage entre la compréhension que l?on a des technologies utilisées, et leurs potentiels réels, ainsi que l'impact potentiellement négatif qu'elles peuvent avoir sur nos vies, n'est pas toujours compris, ou pris en compte par la plupart d'entre-nous. On se contente de nos perceptions pour ne pas avoir à se confronter à la réalité... Alors qu'en est-il vraiment ? En matière de sécurité qui de l'humain ou des technologies a le contrôle ?

  2. Microsoft PowerPoint - Salishan-04-06-Du

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1/2006 University of Minnesota Digital Technology Center Intelligent Storage Consortium 1 DISC University of Minnesota Digital Technology Center Intelligent Storage Consortium David DU Parallel Data Archive in HEC Environment Supported by Symantec, Sun Micro, LSI Logic Storage Systems, ETRE/Korea, ITRI/Taiwan DOE, ONR, Cisco, Intel 5/11/2006 University of Minnesota Digital Technology Center Intelligent Storage Consortium 2 Current Research Projects in DISC Parallel Archive in HEC Environment

  3. Margins for Profit, Not Error: Corporate Energy Management at DuPont

    SciTech Connect (OSTI)

    2010-06-25

    Alliance to Save Energy case study on corporate energy management at DuPont sponsored by the U.S. Department of Energy Industrial Technologies Program.

  4. DuPont's Journey to Build a Global Cellulosic BioFuel Business...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... All rights reserved 5 AG & NUTRITION INDUSTRIAL BIOSCIENCES ADVANCED ... All rights reserved DuPont Feedstock Collection Program: Contracting with more than 500 local farmers to ...

  5. Method of underground mining by pillar extraction

    DOE Patents [OSTI]

    Bowen, Ray J. (1879 Delann, Salt Lake City, UT 84121); Bowen, William R. (1636 Sunnydale La., Salt Lake City, UT 84108)

    1980-08-12

    A method of sublevel caving and pillar and top coal extraction for mining thick coal seams includes the advance mining of rooms and crosscuts along the bottom of a seam to a height of about eight feet, and the retreat mining of the top coal from the rooms, crosscuts and portions of the pillars remaining from formation of the rooms and cross-cuts. In the retreat mining, a pocket is formed in a pillar, the top coal above the pocket is drilled, charged and shot, and then the fallen coal is loaded by a continuous miner so that the operator remains under a roof which has not been shot. The top coal from that portion of the room adjacent the pocket is then mined, and another pocket is formed in the pillar. The top coal above the second pocket is mined followed by the mining of the top coal of that portion of the room adjacent the second pocket, all by use of a continuous miner which allows the operator to remain under a roof portion which has not been shot.

  6. Measuring mine roof bolt strains

    SciTech Connect (OSTI)

    Steblay, B.J.

    1986-07-22

    A method is described of measuring the strain in mine roof bolts comprising the steps of: machining a flat portion on the head of the bolt before loading; drilling a reflector hole radially through the diameter of the bolt at a predetermined distance from the bolt head before loading, the ratio of the diameter of the hole to the diameter of the bolt being less than 0.10 to prevent weakening of the loaded bolt; generating an ultrasonic pulse at the flat portion after loading; measuring the time of travel of the ultrasonic pulse reflected from the hole, which increases as the bolt is loaded; and correlating the time measurement of the strain in the bolt.

  7. Mined land reclamation in Wisconsin since 1973

    SciTech Connect (OSTI)

    Hunt, T.C.

    1989-01-01

    Reclamation has long been recognized as an essential action necessary to mitigate the degradation of land caused by mining activities. But, it is only within the past several decades that reclamation has become an integral component of the mineral extraction process. While the Metallic Mining Reclamation Act (MMRA) was passed in 1973, Wisconsin is yet to enact comprehensive state-wide reclamation requirements for mining other than metallic minerals and the code for metallic mining has yet to establish procedures and standards for reclamation success, specifically revegetation and postmining land use. This study integrates several interdisciplinary methodologies including a history of reclamation; an inventory and status report of mined lands; a critique and comparison of existing reclamation policy with previous state and current federal reclamation policies; in-field case studies of revegetation parameters, procedures, and performance standards; and an economic analysis of reclamation technology. This study makes three major recommendations: (1) The metallic mining code should be amended to establish vegetation parameters, measuring methods, and performance standards for revegetation success similar to those contained in the federal Surface Mining Control and Reclamation Act (SMCRA); (2) The metallic mining code should be amended to resolve semantic loopholes by clearly defining the endpoints of terms such as restoration, reclamation, and rehabilitation and by utilizing the reclamation continuum as a planning tool for determining acceptable postmining land use alternatives; and (3) Mandatory statewide nonmetallic legislation should be enacted to strengthen the mineral resource management program in Wisconsin by systematically and uniformly regulating the mining and reclamation of nonmetallic minerals, the state's most important mineral resource.

  8. Injury experience in coal mining, 1979

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1979. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and bituminous or anthracite coal. Correlative information on employment, worktime, and operating activity also is presented. For ease of correlation between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included. Data were reported by operators of coal mines and preparation plants on a mandatory basis as required under the Federal Mine Safety and Health Act of 1977, Public Law 91-173 as amended by Public Law 95-164. Since January 1, 1978, operators of mines or preparation plants or both which are subject to the Act have been required under 30 CFR, Part 50 to submit reports of injuries, occupational illnesses, and related data. The statistical measures for injury experience adopted by MSHA in 1978 compare closely with the measures used in the Office of Occupational Safety and Health Statistics, Bureau of Labor Statistics, US Department of Labor. Therefore, beginning with 1978 data the mining industry can be compared on a standard basis with other United States industries. The statistical data the work experience of all personnel engaged in exploration development, production, maintenance, repair, and construction work, including supervisory and technical personnel, working partners, and onsite officeworkers. The terminology used throughout this report is that generally used by the mineral-extractive industries and by MSHA.

  9. Method of locating underground mines fires

    DOE Patents [OSTI]

    Laage, Linneas; Pomroy, William

    1992-01-01

    An improved method of locating an underground mine fire by comparing the pattern of measured combustion product arrival times at detector locations with a real time computer-generated array of simulated patterns. A number of electronic fire detection devices are linked thru telemetry to a control station on the surface. The mine's ventilation is modeled on a digital computer using network analysis software. The time reguired to locate a fire consists of the time required to model the mines' ventilation, generate the arrival time array, scan the array, and to match measured arrival time patterns to the simulated patterns.

  10. Are surface coal mine sediment ponds working

    SciTech Connect (OSTI)

    Poe, M.L.; Betson, R.P.

    1985-12-09

    Flowrates and storm generated water quality data were collected at sedimentation ponds on four surface mines in the states of Pennsylvania, Maryland, and West Virginia. The water quality data were analyzed for suspended solids and settleable solids content, and particle size distribution. The results were compared to the effluent limitations guidelines for total suspended solids as promulgated under the Clean Water Act for Coal Mining Point Source Category and adopted under the Surface Mine Control and Reclamation Act of 1977 and the resulting state regulatory programs. 3 references, 1 figure, 2 tables.

  11. Paramont's Black Bear No. 4 mine does it right, again

    SciTech Connect (OSTI)

    Sanda, A.

    2007-07-15

    The Paramont Coal Company Virginia, LLC, a subsidiary of Alpha Natural Resources, recently won the '2007 overall award for excellence in mining and reclamation from the Virginia Division of Mined Land Reclamation and the Virginia Mining Association. Coal People Magazine recently visited Black Bear No. 4 mine where a settling pond was being removed and stream bed placed to drain the area, part of the 451-acre award winning reclamation project. The article recounts discussions with mining engineers about the company's operations with emphasis on the Black Bear No. 4 mine. Black Bear No. 1 mine won five state and national awards last year for conservation and land management practices. 8 photos.

  12. Knight Hawk adapts highwall mining for Southern Illinois

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2007-10-15

    A few years ago while planning their first underground operation and trying to decide how to mine shallow seams, Knight Hawk purchased a 'Superior Highwall Miner' (SHM). Since then this small innovative company has been pioneering the use of highwall mining in a trenching application in for example the Illinois Basin. Highwall mining is very suitable for contour mining in Appalachia. The article discusses the recent improvements and the advantages of SHM mining systems. 3 photos.

  13. U.S. Mining Industry Energy Bandwidth Study | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mining Industry Energy Bandwidth Study U.S. Mining Industry Energy Bandwidth Study mining_bandwidth.pdf (1.27 MB) More Documents & Publications ITP Mining: Energy and Environmental Profile of the U.S. Mining Industry (December 2002) ITP Mining: Mining Industry of the Future Mineral Processing Technology Roadmap ITP Steel: Steel Industry Marginal Opportunity Study September 2005

  14. WIPP Mine Rescue Team Wins, Retires Trophy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    third. Kevin Cummins of IMC-Kalium won first place in the benchman's competition. Joe Baca of the WIPP Blue Team won second place. Mine Rescue teams have been participating in...

  15. Rock mechanics design in mining and tunneling

    SciTech Connect (OSTI)

    Bieniawski, Z.T.

    1984-01-01

    This book introduces the design process as applied to rock mechanics aspects of underground mining and tunneling. Topics covered include a historical perspective, the design process in engineering, empirical methods of design, observational methods of design, and guided design.

  16. Fuelcell-Hybrid Mine loader (LHD)

    SciTech Connect (OSTI)

    James L Dippo; Tim Erikson; Kris Hess

    2009-07-10

    The fuel cell hybrid mine loader project, sponsored by a government-industry consortium, was implemented to determine the viability of proton exchange membrane (PEM) fuel cells in underground mining applications. The Department of Energy (DOE) sponsored this project with cost-share support from industry. The project had three main goals: (1) to develop a mine loader powered by a fuel cell, (2) to develop associated metal-hydride storage and refueling systems, and (3) to demonstrate the fuel cell hybrid loader in an underground mine in Nevada. The investigation of a zero-emissions fuel cell power plant, the safe storage of hydrogen, worker health advantages (over the negative health effects associated with exposure to diesel emissions), and lower operating costs are all key objectives for this project.

  17. Enterprise Assessments Review of Mine Safety, Stabilization,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The U.S. Department of Energy Office of Enterprise Assessments (EA) conducted an independent review of a number of aspects of mine safety, stabilization, and habitability at the ...

  18. WIPP Receives Top Mine Safety Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Top Mine Safety Award CARLSBAD, N.M., September 18, 2013 - The U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) received top safety honors from the New Mexico...

  19. The Silicon Mine | Open Energy Information

    Open Energy Info (EERE)

    produce solar grade polysilicon suitable for the production of wafers or as the base material for the manufacture of solar cells. References: The Silicon Mine1 This article is a...

  20. Conversion of Coal Mine Gas to ...

    Office of Scientific and Technical Information (OSTI)

    ... BECOME TOO GREAT WATER KNOCKOUT FIELD COMPRESSOR ... FROM GOV AT MARKETING ENGINEERING Dia (in) SHELTER FOR LNG ... Mines 2008) o >1,000' deep o >12' seam o Annual coal ...

  1. Dragline mining returns to western Kentucky

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2009-05-15

    Armstrong Coal Co. now owns three Page draglines-one now operating at the Midway Surface mine, one due to go into operation at the Equality surface mine and a third that is being rebuilt also for use there. Armstrong is banking on the economics of scale to once again prove that these older machines are still the most efficient way to move large volumes of overburden. 4 photos.

  2. Non-destructive analysis of DU content in the NIF hohlraums

    SciTech Connect (OSTI)

    Gharibyan, Narek; Moody, Ken J.; Shaughnessy, Dawn A.

    2015-12-16

    The advantage of using depleted uranium (DU) hohlraums in high-yield deuterium-tritium (DT) shots at the National Ignition Facility (NIF) is addressed by Döppner, et al., in great detail [1]. This DU based hohlraum incorporates a thin layer of DU, ~7 μm thick, on the inner surface along with a thin layer of a gold coating, ~0.7 μm thick, while the outer layer is ~22 μm thick gold. A thickness measurement of the DU layer can be performed using an optical microscope where the total DU weight can be computed provided a uniform DU layer. However, the uniformity of the thickness is not constant throughout the hohlraum since CAD drawing calculations of the DU weight do not agree with the computed values from optical measurements [2]. Therefore, a non-destructive method for quantifying the DU content in hohlraums has been established by utilizing gamma-ray spectroscopy. The details of this method, along with results from several hohlraums, are presented in this report.

  3. E. 1. DU PONT DE NEMOURS & COMPANY

    Office of Legacy Management (LM)

    E. 1. DU PONT DE NEMOURS & COMPANY ,*Eo~UI~ WILMINGTON 99, DELAWARE IQ?. R. L. Kilburn, Director (2) Technical and Production Division Savannah River Operations Office U. S. Atomic Energy Commission -:; ;:~~~~!,~:c';~,~"s-,fi,:-~~~i:~!~~,,,,~~, ,';;'nf;;G;h=;cr;lina :J "'- I Dear IfI. Kilburn: RESEARCH PROGRAMS IN SUPPORT OF SAVANNAH RIVER In a letter to you dated April 19, 1956, ~~14-56-218, we recommended that the Savannah River Operations Office set aside funds to cover certain

  4. ESF Mine Power Center Platforms

    SciTech Connect (OSTI)

    T.A. Misiak

    2000-02-10

    The purpose and objective of this analysis is to structurally evaluate the existing Exploratory Studies Facility (ESF) mine power center (MPC) support frames and to design service platforms that will attach to the MPC support frames. This analysis follows the Development Plan titled ''Produce Additional Design for Title 111 Evaluation Report'' (CRWMS M&O 1999a). This analysis satisfies design recommended in the ''Title III Evaluation Report for the Surface and Subsurface Power System'' (CRWMS M&O 1999b, Section 7.6) and concurred with in the ''System Safety Evaluation of Title 111 Evaluation Reports Recommended Work'' (Gwyn 1999, Section 10.1.1). This analysis does not constitute a level-3 deliverable, a level-4 milestone, or a supporting work product. This document is not being prepared in support of the Monitored Geologic Repository (MGR) Site Recommendation (SR), Environmental Impact Statement (EIS), or License Application (LA) and should not be cited as a reference in the MGR SR, EIS, or LA.

  5. Remining to reclaim abandoned mined lands: Virginia`s initiative

    SciTech Connect (OSTI)

    Zipper, C.E.; Lambert, B.

    1998-12-31

    Abandoned Mined Lands (AML) are lands that were mined prior to implementation of the federal Surface Mining Control and Reclamation Act (SMCRA) in 1977, but were inadequately reclaimed. Re-mining of AML is being conducted on a routine basis by coal-mining operations in eastern states such as Virginia. Re-mining is a potentially important means of reclaiming AML. However, under current policies, re-mining operations often fail to permit and reclaim priority 1, 2, and 3 AML, especially those areas which present the most severe environmental problems. This paper describes policy issues which affect the potential for AML reclamation by re-mining operations in mountainous mining areas, such as Virginia; efforts underway in Virginia which seek to resolve those issues; and progress achieved to date under that initiative.

  6. Regulating for the long term: SMCRA and acid mine drainage

    SciTech Connect (OSTI)

    Shea, C.W.

    1995-12-31

    With the passage of the Surface Mining Control and Reclamation Act of 1977 (SMCRA), regulators and industry representatives expected to solve the problem of pollution of the Nation`s waterways caused by acidic discharges from coal mines. Eighteen years after the passage of SMCRA, hard issues of predicting, regulating and treating acid mine drainage remain. Acid mine drainage is most common in the coal seams of the Midwest and Appalachia: Pennsylvania, West Virginia, Maryland, Ohio, Illinois, and Tennessee. This article discusses regulation of coal mines and acid mine drainage for the long term.

  7. Carbon Sequestration on Surface Mine Lands

    SciTech Connect (OSTI)

    Donald Graves; Christopher Barton; Richard Sweigard; Richard Warner; Carmen Agouridis

    2006-03-31

    Since the implementation of the federal Surface Mining Control and Reclamation Act of 1977 (SMCRA) in May of 1978, many opportunities have been lost for the reforestation of surface mines in the eastern United States. Research has shown that excessive compaction of spoil material in the backfilling and grading process is the biggest impediment to the establishment of productive forests as a post-mining land use (Ashby, 1998, Burger et al., 1994, Graves et al., 2000). Stability of mine sites was a prominent concern among regulators and mine operators in the years immediately following the implementation of SMCRA. These concerns resulted in the highly compacted, flatly graded, and consequently unproductive spoils of the early post-SMCRA era. However, there is nothing in the regulations that requires mine sites to be overly compacted as long as stability is achieved. It has been cultural barriers and not regulatory barriers that have contributed to the failure of reforestation efforts under the federal law over the past 27 years. Efforts to change the perception that the federal law and regulations impede effective reforestation techniques and interfere with bond release must be implemented. Demonstration of techniques that lead to the successful reforestation of surface mines is one such method that can be used to change perceptions and protect the forest ecosystems that were indigenous to these areas prior to mining. The University of Kentucky initiated a large-scale reforestation effort to address regulatory and cultural impediments to forest reclamation in 2003. During the three years of this project 383,000 trees were planted on over 556 acres in different physiographic areas of Kentucky (Table 1, Figure 1). Species used for the project were similar to those that existed on the sites before mining was initiated (Table 2). A monitoring program was undertaken to evaluate growth and survival of the planted species as a function of spoil characteristics and

  8. Noise exposures in US coal mines

    SciTech Connect (OSTI)

    Seiler, J.P.; Valoski, M.P.; Crivaro, M.A.

    1994-05-01

    Mine Safety and Health Administration (MSHA) inspectors conduct full-shift environmental noise surveys to determine the occupational noise levels to which coal miners are exposed. These noise surveys are performed to determine compliance with the noise standard promulgated under the Federal Mine Safety and Health Act of 1977. Data from over 60,000 full-shift noise surveys conducted from fiscal year 1986 through 1992 were entered into a computer data base to facilitate analysis. This paper presents the mean and standard deviation of over 60,000 full-shift noise dose measurements for various underground and surface coal mining occupations. Additionally, it compares and contrasts the levels with historical noise exposure measurements for selected coal mining occupations that were published in the 1970`s. The findings were that the percentage of miners surveyed that were subjected to noise exposures above 100%, neglecting personal hearing protectors, were 26.5% and 21.6% for surface and underground mining, respectively. Generally, the trend is that the noise exposures for selected occupations have decreased since the 1970`s.

  9. Active mines in Arizona - 1993. Directory 40

    SciTech Connect (OSTI)

    Phillips, K.A.; Niemuth, N.J.; Bain, D.R.

    1992-01-01

    A directory of the active mines in Arizona is presented. The directory was compiled in November, 1992 from field visits and information received by the Department's technical staff. For the purpose of this directory, an active mine is defined as a mine in continuous operation, either in production or under full-time development for production. Custom milling operations that are active or available on a full-time basis are also included in the directory. It is acknowledged that there are additional mines not listed that are in an exploration, evaluation, or part-time development phase. There are others where production is on an intermittent basis that are not listed. The report is dependent on the cooperation of government agencies, private industry, and individuals who voluntarily provide information on their projects and activities. The directory is arranged alphabetically by company name. Each listing includes corporate addresses, mine name and location, operation description, and key personnel. The listing for the sand and gravel operations include name, address, and phone number.

  10. OSTIblog Articles in the HomeStake MIne Topic | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    HomeStake MIne Topic Mining for Gold, Neutrinos and the Neutrinoless Double Beta Decay by ... The site of the former Homestake Mine was once one of the largest and deepest gold mines ...

  11. West Des Moines, Iowa: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. West Des Moines is a city in Dallas County and Polk County and Warren County, Iowa. It falls...

  12. A Touch of Green for Des Moines’ Sherman Hill

    Broader source: Energy.gov [DOE]

    Des Moines' Green & Main intends to intends to renovate an abandoned 1930s grocery store into a mixed-use facility with LEED Platinum certification – a prestigious badge of energy efficiency and sustainable building practices.

  13. Des Moines, Washington: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    This article is a stub. You can help OpenEI by expanding it. Des Moines is a city in King County, Washington. It falls under Washington's 9th congressional district.12...

  14. Graph Mining Meets the Semantic Web

    SciTech Connect (OSTI)

    Lee, Sangkeun; Sukumar, Sreenivas R; Lim, Seung-Hwan

    2015-01-01

    The Resource Description Framework (RDF) and SPARQL Protocol and RDF Query Language (SPARQL) were introduced about a decade ago to enable flexible schema-free data interchange on the Semantic Web. Today, data scientists use the framework as a scalable graph representation for integrating, querying, exploring and analyzing data sets hosted at different sources. With increasing adoption, the need for graph mining capabilities for the Semantic Web has emerged. We address that need through implementation of three popular iterative Graph Mining algorithms (Triangle count, Connected component analysis, and PageRank). We implement these algorithms as SPARQL queries, wrapped within Python scripts. We evaluate the performance of our implementation on 6 real world data sets and show graph mining algorithms (that have a linear-algebra formulation) can indeed be unleashed on data represented as RDF graphs using the SPARQL query interface.

  15. Closing the gap: DuPont`s response to the 1991 industrial power benchmarking study

    SciTech Connect (OSTI)

    Bailey, W.F.

    1996-12-31

    In 1991, DuPont benchmarked its industrial power facilities against other industrial and independent power producers, identified key areas of weakness and developed a blueprint for change to improve its energy competitiveness. Since then, efforts have been undertaken to address the weaknesses identified in the benchmarking study and to capitalize on strengths in DuPont`s various industrial power operations. This paper provides an update to the DuPont Industrial Power Benchmarking Study and describes major focus areas such as competitive electricity sourcing, control technology, performance assessment tools and internal networking efforts.

  16. Minnesota Mining and Manufacturing Co 3M | Open Energy Information

    Open Energy Info (EERE)

    Mining and Manufacturing Co 3M Jump to: navigation, search Name: Minnesota Mining and Manufacturing Co (3M) Place: Saint Paul, Minnesota Zip: MN 55144-1000 Product: US-based...

  17. Colorado School of Mines | OpenEI Community

    Open Energy Info (EERE)

    of Mines Home CSM's picture Submitted by CSM(5) Member 14 May, 2014 - 21:59 Travis Brown and Kamran Baksh, Final Submission Colorado School of Mines Waunita Hot Springs...

  18. Microsoft Word - Mine Rescue Team Wins Best Overall at Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mine Safety and Health Administration (MSHA) judge each team's response skills. Joe Baca won first place in the Benchman's Contest. The benchman's job on a mine rescue team is...

  19. Framework for autonomous navigation of a continuous mining machine

    SciTech Connect (OSTI)

    Anderson, D.L.

    1989-01-01

    This report includes a discussion of the navigational tasks performed by operators of mobile mining equipment, with the focus on the navigational information and guidance techniques required by continuous mining machine operators. Some previous research and attempts in remote and autonomous navigation of continuous mining machines are mentioned. Issues of research in autonomous navigation of various other mobile robots are presented, with attention focused on their applicability to a continuous mining machine navigating in the mining environment. Conclusions are stated on methods of automating the navigational tasks of a contionuous mining machine, and a decision to concentrate intitial attempts on the tasks of autonomous face navigation is defended. This report includes a presentation of the Bureau's proposed solution for autonomous face navigation of a continous mining machine, which includes the employment of a mobile roof support as a reference for guidance in the face area, and a navigational guidance system for the continuous mining machine.

  20. DOE - Office of Legacy Management -- Abandoned Uranium Mines

    Office of Legacy Management (LM)

    Uranium Mines Report to Congress The U.S. Department of Energy (DOE) Office of Legacy Management completed a report on defense-related uranium mines in consultation with...

  1. Westinghouse Earns Mine Safety Award for 16th Consecutive Year

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    was recently awarded the "Mine Operator of the Year Award" at the annual New Mexico Mining Association Convention held in Silver City, N.M. WTS, the management and operating...

  2. Alaska Division of Mining Land and Water | Open Energy Information

    Open Energy Info (EERE)

    Mining Land and Water Jump to: navigation, search Name: Alaska Division of Mining Land and Water Address: 550 W. 7th Ave., Suite 1260 Place: Anchorage, Alaska Zip: 99501-3557 Phone...

  3. Coal mine ground control. 3rd ed.

    SciTech Connect (OSTI)

    Peng, S.S.

    2008-09-15

    The third edition not only completely revises and updates the original subject areas, but also is broadened to include a number of new topics such as high horizontal stresses, computer modeling, and highwall stability. The subject areas covered in this book define the current field of coal mine ground control, except for the recently emerging topic of mine seals and some conventional subjects such as coal/rock cutting and impoundment dams. It contains 1,134 references from all published sources, and archived since 1876.

  4. High pressure water jet mining machine

    DOE Patents [OSTI]

    Barker, Clark R.

    1981-05-05

    A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

  5. Major manufacturing and mining investment projects

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    This book lists manufacturing and mining investment projects with development costs of $5 million or more. Manufacturing projects are classified in accordance with the Australian Bureau of Statistics' Australian Standard Industrial Classification (ASIC) and mining projects by broad mineral categories. The book includes information on the nature of each project, its location and timing, the company of joint venture name, whether the investment is at a new site or at an existing site, the type of product, the value of the annual output, production, employment, past and future costs and the composition (structure and plant) of the investment.

  6. Colorado School of Mines 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Colorado School of Mines 2014 Colorado School of Mines 2014 Back row: Alex Dell, Zachary Weber, Aaron Troyer, Cabe Bonner, Jeremy Webb. Front row: Katherine Rooney, Jyotsana Gandhi, Kevin Tan, Kelsey Wokasch. Photo from Colorado School of Mines. Back row: Alex Dell, Zachary Weber, Aaron Troyer, Cabe Bonner, Jeremy Webb. Front row: Katherine Rooney, Jyotsana Gandhi, Kevin Tan, Kelsey Wokasch. Photo from Colorado School of Mines. Project Description Named after the Greek god of the west wind, Team

  7. PP-85-A Westmin Mines, Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Westmin Mines, Inc. PP-85-A Westmin Mines, Inc. Presidential Permit authorizing Westmin Mines, Inc. to construct, operate, and maintain electric transmission facilities at the U.S. -Canada Border. PP-85-A Westmin Mines, Inc. (1.02 MB) More Documents & Publications PP-85 Westmin Resources, Inc. PP-85-2 Boliden Westmin (Canada) Limited PP-82-2 Vermont Electric Power Company, Inc. (VELCO

  8. Coal recovery from mine wastes of the historic longwall mining district of north-central illinois. Illinois mineral notes

    SciTech Connect (OSTI)

    Khan, L.A.; Berggren, D.J.; Camp, L.R.

    1986-01-01

    Recovery of coal from mine wastes produced by historic longwall mines in northeastern Illinois was studied as part of a project undertaken in 1982 for the Illinois Abandoned Mined Lands Reclamation Council. About 100 of these mines operated in the Wilmington and La Salle Districts of the Illinois Coal Field between about 1870 and 1940; all worked the Colchester (No. 2) Coal Seam, using a manual high-extraction mining method. Large samples of the three major kinds of mine waste - gray mining gob, preparation gob, and preparation slurry - were collected from deposits at nine of the larger mine sites and analyzed to determine their general ranges of sulfur, ash, and heating values. Preparation gob and slurry from six of the sites had significant combustible contents, and were evaluated by a simple procedure in which ash analyses and wet-screening tests were used to determine the washability and yield of combustibles to recovery processes.

  9. Rock mass response to the decline in underground coal mining

    SciTech Connect (OSTI)

    Holub, K.

    2006-01-15

    Geomechanical problems of mining in the Ostrava-Karvina Coal Basin were studied on the basis of longterm experience gained from seismological observations. They could serve as reasonable models of rock-mass response to temporary reduction and gradual decline in mining activities and mine closure.

  10. SOLUTION MINING IN SALT DOMES OF THE GULF COAST EMBAYMENT

    SciTech Connect (OSTI)

    Griswold, G. B.

    1981-02-01

    Following a description of salt resources in the salt domes of the gulf coast embayment, mining, particularly solution mining, is described. A scenario is constructed which could lead to release of radioactive waste stored in a salt dome via inadvertent solution mining and the consequences of this scenario are analyzed.

  11. Nondestructive Testing Qualification of Main Circulatory Tube Pipes DU 500

    SciTech Connect (OSTI)

    Tabakova, Bojana M.; Tzokov, Petio

    2004-07-01

    The criteria for safe operation of nuclear energetic installations is given a higher priority in the policy of Kozloduy Nuclear Power Plant. An efficient non-destructive inspection is the key point for the safe service. Kozloduy NPP keeps on making investments in equipment and qualification of specialists in this field. The processes of qualification of the NDT components, important for the nuclear and radiation safety, make considerable improvement in Kozloduy NPP, thanks to the accumulated in the years experience in the activities of NDT inspection qualification, and to the help of our partners Serco Assurance and the Institute of Rzes. The results obtained by ultrasonic non-destructive inspection of circulation tube mains DU 500 WWER 440 type are under discussion in this report. (authors)

  12. Energy Secretary Chu to Tour DuPont Clean Energy Innovation Facilities

    Broader source: Energy.gov [DOE]

    WASHINGTON – Tomorrow, Wednesday, May 23, 2012, U.S. Energy Secretary Steven Chu will visit DuPont in Wilmington, Delaware, where he will tour the company’s clean energy research and development...

  13. ITP Mining: Water Use in Industries of the Future: Mining Industry

    Broader source: Energy.gov [DOE]

    Water and energy may be directly or indirectly related in the mining industry, and the connection is mainly through pumping power to transfer the water or aqueous slurries of mineral products to another location.

  14. WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2004-01-01

    A prototype tracking system was built and tested. Moving vehicles were detected by the tracking system when a vehicle was 20 to 30 feet away from a location sensor. The identity of the vehicle was transmitted to Transtek's in-mine communications system and relayed to a desktop computer.

  15. Motor technology for mining applications advances

    SciTech Connect (OSTI)

    Fiscor, S.

    2009-08-15

    AC motors are steadily replacing DC motors in mining and mineral processing equipment, requiring less maintenance. The permanent magnet rotor, or the synchronous motor, has enabled Blador to introduce a line of cooling tower motors. Synchronous motors are soon likely to take over from the induction motor. 1 photo.

  16. Geotechnical considerations in surface mine reclamation

    SciTech Connect (OSTI)

    Kuhn, A.K.

    1999-07-01

    Most attention in surface mine reclamation is given to agronomic soils and revegetation, but reclamation success depends on the geotechnical characteristics of the underlying earth. If the soil and rock that underline the surface are not stable, surface treatments lack the dependable foundation needed for them to succeed. Reclamation practioners need to understand those geotechnical considerations--material properties, structure, and processes--that affect stability. properties of rock and soil are altered by mining, and those altered materials together with water and processing waste form often-complex mixtures of materials that must be stabilized in reclamation. Surface mining alters existing landforms and creates new ones such as pit walls, spoil and waste rock piles, tailings impoundments, and earthfills. those structures need to be constructed or stabilized so that they can endure and support successful reclamation. processes that affect material properties and landforms include mechanical breakage, accelerated weathering, erosion, and mass movements. Mechanical breakage and the resulting accelerated weathering combine to change material properties, usually expressed as degraded strength, that can lead to instability of landforms. Erosion, especially that related to extreme storm events, and mass movements in the form of slop failures are the most problematic processes that must be taken into account in reclaiming mined lands. These geotechnical considerations are essential in successful reclamation, and practioners who overlook them may find their work literally sliding down a slippery slope.

  17. Generating power with drained coal mine methane

    SciTech Connect (OSTI)

    2005-09-01

    The article describes the three technologies most commonly used for generating electricity from coal mine methane: internal combustion engines, gas turbines, and microturbines. The most critical characteristics and features of these technologies, such as efficiency, output and size are highlighted. 5 refs.

  18. Development of surface mine cost estimating equations

    SciTech Connect (OSTI)

    Not Available

    1980-09-26

    Cost estimating equations were developed to determine capital and operating costs for five surface coal mine models in Central Appalachia, Northern Appalachia, Mid-West, Far-West, and Campbell County, Wyoming. Engineering equations were used to estimate equipment costs for the stripping function and for the coal loading and hauling function for the base case mine and for several mines with different annual production levels and/or different overburden removal requirements. Deferred costs were then determined through application of the base case depreciation schedules, and direct labor costs were easily established once the equipment quantities (and, hence, manpower requirements) were determined. The data points were then fit with appropriate functional forms, and these were then multiplied by appropriate adjustment factors so that the resulting equations yielded the model mine costs for initial and deferred capital and annual operating cost. (The validity of this scaling process is based on the assumption that total initial and deferred capital costs are proportional to the initial and deferred costs for the primary equipment types that were considered and that annual operating cost is proportional to the direct labor costs that were determined based on primary equipment quantities.) Initial capital costs ranged from $3,910,470 in Central Appalachia to $49,296,785; deferred capital costs ranged from $3,220,000 in Central Appalachia to $30,735,000 in Campbell County, Wyoming; and annual operating costs ranged from $2,924,148 in Central Appalachia to $32,708,591 in Campbell County, Wyoming. (DMC)

  19. Preliminary report on LLNL mine seismicity deployment at the Twentymile Coal Mine

    SciTech Connect (OSTI)

    Walter, W.R.; Hunter, S.L.; Glenn, L.A.

    1996-01-01

    This report summarizes the preliminary results of a just completed experiment at the Twentymile Coal Mine, operated by the Cyprus Amax Coal Company near Oak Creek, CO. The purpose of the experiment was to obtain local and regional seismic data from roof caves associated with long-wall mining activities and to use this data to help determine the effectiveness with which these events can be discriminated from underground nuclear explosions under a future Comprehensive Test Ban Treaty.

  20. A study of mining-induced seismicity in Czech mines with longwall coal exploitation

    SciTech Connect (OSTI)

    Holub, K.

    2007-01-15

    A review is performed for the data of local and regional seismographical networks installed in mines of the Ostrava-Karvina Coal Basin (Czech Republic), where underground anthracite mining is carried out and dynamic events occur in the form of rockbursts. The seismological and seismoacoustic observations data obtained in panels that are in limiting state are analyzed. This aggregate information is a basic for determining hazardous zones and assigning rockburst prevention measures.

  1. Reduction of fire hazards on large mining equipment

    SciTech Connect (OSTI)

    Maria I. De Rosa

    2008-09-15

    Although standards and regulations are in place to prevent large mining equipment fires, recent analyses of mine accident data show that mining equipment fires still occur with alarming frequency and grave consequences, particularly at all surface mines and in underground metal/nonmetal mines. Recently technological advances in fire protection, combined with the statistical data on equipment fires, led NIOSH to reinvestigate this and to improve operator safety. NIOSH demonstrated that newly developed technologies, such as dual cab fire inerting systems and engine compartment fire barriers, can greatly enhance operator safety and lessen the damage of property during large mobile equipment fires. 10 refs., 5 figs.

  2. Abandoned Uranium Mines Report to Congress: LM Wants Your Input |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Abandoned Uranium Mines Report to Congress: LM Wants Your Input Abandoned Uranium Mines Report to Congress: LM Wants Your Input April 11, 2013 - 1:33pm Addthis C-SR-10 Uintah Mine, Colorado, LM Uranium Lease Tracts C-SR-10 Uintah Mine, Colorado, LM Uranium Lease Tracts What does this project do? Goal 4. Optimize the use of land and assets Abandoned Uranium Mines Report to Congress The U.S. Department of Energy (DOE) Office of Legacy Management (LM) is seeking stakeholder

  3. Expert systems - An overview and a mining example

    SciTech Connect (OSTI)

    Kohler, J.L.; Ramani, R.V.; Bieniawski, Z.T.

    1986-01-01

    The knowledge-based expert systems (KBES) is a potentially powerful technique to the mining engineer in traditional areas of mine design and operations, as well as in the emerging areas of mining automation and robotics. Since KBES is still experimental in many respects, caution must be exercised as this ''high tech'' tool is developed and applied to mining. The objective of this paper is to demystify expert systems by introducing the elements of KBES, discussing the strengths and weaknesses, and identifying some areas of application in mining, based on the authors' experiences.

  4. Work plan for revising the RAMC mine costing methodology. [USA; regional; modifications; based on specific mines reviewed

    SciTech Connect (OSTI)

    Not Available

    1980-06-16

    Based on discussions with the Technical Project Officer and current budget constraints, the approach chosen for improving the RAMC mine costing methodology is as follows: Develop a set of regional model mines (both surface and underground) which reflect mining conditions and preference for each major producing district; develop regional equations relating capital and operating costs to various system components; and develop the input data necessary for each estimating relationship. To date, engineering work-ups for all model mines have been prepared, a preliminary surface mine cost model has been developed and steps have been taken to reduce EIA-7 data for use in developing an underground cost model. Descriptions of the surface and underground model mines are contained in Appendices A and B, respectively, and the preliminary surface mine cost model is contained in Appendix C.

  5. Data Mining for Security Information: A Survey

    SciTech Connect (OSTI)

    Brugger, S T; Kelley, M; Sumikawa, K; Wakumoto, S

    2001-04-19

    This paper will present a survey of the current published work and products available to do off-line data mining for computer network security information. Hundreds of megabytes of data are collected every second that are of interest to computer security professionals. This data can answer questions ranging from the proactive, ''Which machines are the attackers going to try to compromise?'' to the reactive, ''When did the intruder break into my system and how?'' Unfortunately, there's so much data that computer security professionals don't have time to sort through it all. What we need are systems that perform data mining at various levels on this corpus of data in order to ease the burden of the human analyst. Such systems typically operate on log data produced by hosts, firewalls and intrusion detection systems as such data is typically in a standard, machine readable format and usually provides information that is most relevant to the security of the system. Systems that do this type of data mining for security information fall under the classification of intrusion detection systems. It is important to point out that we are not surveying real-time intrusion detection systems. Instead, we examined what is possible when the analysis is done off-line. Doing the analysis off-line allows for a larger amount of data correlation between distant sites who transfer relevant log files periodically and may be able to take greater advantage of an archive of past logs. Such a system is not a replacement for a real-time intrusion detection system but should be used in conjunction with one. In fact, as noted previously, the logs of the real-time IDS may be one of the inputs to the data mining system. We will concentrate on the application of data mining to network connection data, as opposed to system logs or the output of real-time intrusion detection systems. We do this primarily because this data is readily obtained from firewalls or real-time intrusion detectors and it

  6. Site selection report: characterization of subsidence over longwall mining panels

    SciTech Connect (OSTI)

    Not Available

    1981-02-20

    We have completed our evaluation of candidate longwall mines available for study in the Rocky Mountain Coal Province. This report summarizes our views and evaluation of two candidate mines, the Allen Mine in Weston, Colorado, and the Hawk's Nest Mine in Somerset, Colorado. WCC visited the Allen and the Hawk's Nest Mines, and rated them in order of preference for subsidence monitoring according to criteria given in this report. Based on these evaluations and related discussions with the Technical Project Officer, the Hawk's Nest Mine appears to be the preferred mine for subsidence monitoring, because it is the only candidate mine offering two adjacent longwall panels for monitoring wherein a full subsidence profile may be obtained for at least one of the panels. Selection of this mine requires that provisions be made for monitoring 2000 ft of overburden, whereas our proposal addressed a mine with 600 ft of overburden. Changes in instrumentation which may permit the project to remain within the current budget were investigated and are discussed.

  7. Reflection seismic mapping of an abandoned coal mine, Belleville, Illinois

    SciTech Connect (OSTI)

    Anderson, N.; Hinds, R.; Roark, M.

    1997-10-01

    Old mine location maps (1958 vintage) indicate that the northwestern part of an undeveloped property near the town of Belleville, St. Clair County, Illinois, is situated above an abandoned and now water-filled, room-and-pillar type coal mine. The central and southeast parts of the Belleville property are shown as overlying intact (non-mined) coal. The coal unit mined at the Belleville site, the Herrin No. 6 is Pennsylvanian in age and about 2.5 m thick at a depth of around 40 m. The current owners of the Belleville property want to construct a large building on the central and southeast parts of the site, but have been concerned about the accuracy of the old mine location maps because of recent mine-related surface subsidence in areas designated on the maps as not mined. To ensure that the proposed new development is located on structurally stable ground, a grid of ten high-resolution reflection seismic lines was acquired on-site. On these reflection seismic data, mined-out areas can be visually identified and differentiated from non-mined areas. The interpretation of the reflection seismic data was constrained and validated by 15 test boreholes. These seismic and borehole data confirm that the central and southeast parts of the property have not been mined extensively. Development of the Belleville site has proceeded with confidence.

  8. Marine clathrate mining and sediment separation

    DOE Patents [OSTI]

    Borns, David J.; Hinkebein, Thomas E.; Lynch, Richard W.; Northrop, David A.

    2001-01-01

    A method and apparatus for mining of hydrocarbons from a hydrocarbon-containing clathrate such as is found on the ocean floor. The hydrocarbon containing clathrate is disaggregated from sediment by first disrupting clathrate-containing strata using continuous mining means such as a rotary tilling drum, a fluid injector, or a drill. The clathrate-rich portion of sediment thus disrupted from the sea floor strata are carried through the apparatus to regions of relative lower pressure and/or relative higher temperature where the clathrate further dissociates into component hydrocarbons and water. The hydrocarbon is recovered with the assistance of a gas that is injected and buoys the hydrocarbon containing clathrate helping it to rise to regions of lower pressure and temperature where hydrocarbon is released. The sediment separated from the hydrocarbon returns to the ocean floor.

  9. Moving up down in the mine: Sex segregation in underground coal mining

    SciTech Connect (OSTI)

    Tallichet, S.E.

    1991-01-01

    This study employs both individualist theories of human capital and sex-role spillover and structuralist theories from the socialist feminist perspective, emphasizing the formal and informal organizational factors operating within a patriarchal capitalist society to explain job-level sex segregation among underground coal miners. Both quantitative and qualitative data on women in coal mining are used to evaluate these theories. A logistic regression analysis performed on data obtained in 1986 by the US Bureau of Mines demonstrates that while human capital variables are predictive of a miner's job rank, variation in job rank attributed to gender is even greater. For men, training and experience in mining combine to increase the probability of being in a more skilled job in a coal mine. Age and seniority are curvilinearly related to the variation in men's job rank. For women, only age accounts for their advancement such that younger, not older women who have slightly more mining experience, occupy the more skilled positions in the work place. These findings suggest that, in terms of job advancement, men enjoy a greater return on their human capital investments than women, and that factors other than those representing a miner's human capital are affecting women's positions underground more than men's.

  10. Automation of the longwall mining system

    SciTech Connect (OSTI)

    Zimmerman, W.; Aster, R.; Harris, J.; High, J.

    1982-11-01

    The longwall automation study presented is the first phase of a study to evaluate mining automation opportunities. The objective was to identify cost-effective, safe, and technologically sound applications of automation technology to understand coal mining. The prime automation candidates resulting from the industry experience and survey were: (1) the shearer operation, (2) shield and conveyor pan-line advance, (3) a management information system to allow improved mine logistics support, and (4) component fault isolation and diagnostics to reduce untimely maintenance delays. A system network analysis indicated that a 40% improvement in productivity was feasible if system delays associated with all of the above four areas were removed. A technology assessment and conceptual system design of each of the four automation candidate areas showed that state-of-the-art digital computer, servomechanism, and actuator technologies could be applied to automate the longwall system. The final cost benefit analysis of all of the automation areas indicated a total net national benefit (profit) of roughly $200 million to the longwall mining industry if all automation candidates were installed. This cost benefit represented an approximate order of magnitude payback on the research and development (R and D) investment. In conclusion, it is recommended that the shearer operation be automated first because it provides a large number of other sensor inputs required for face alignment (i.e., shields and conveyor). Automation of the shield and conveyor pan-line advance is suggested as the next step since both the shearer and face alignment operations contributed the greatest time delays to the overall system downtime.

  11. Clearing rain from open-pit mine

    SciTech Connect (OSTI)

    Not Available

    1984-05-01

    Because of the large yearly rainfall in Panguna, Bougainveille Island, North Solomons Province, Papua New Guinea, unique problems have developed for the open-pit copper mine operated there by Bougainville Copper Limited. The large size of ths pit intercepts numerous streams and drainways which enter the area. The article discusses various methods to reduce and eliminate this water. Methods discussed are channels, pumping and tunneling.

  12. Cutting sound enhancement system for mining machines

    DOE Patents [OSTI]

    Leigh, Michael C.; Kwitowski, August J.

    1992-01-01

    A cutting sound enhancement system (10) for transmitting an audible signal from the cutting head (101) of a piece of mine machinery (100) to an operator at a remote station (200), wherein, the operator using a headphone unit (14) can monitor the difference in sounds being made solely by the cutting head (101) to determine the location of the roof, floor, and walls of a coal seam (50).

  13. Mining landforms - A renewable energy development opportunity

    SciTech Connect (OSTI)

    Lombardi, J.A.

    1995-12-01

    A {open_quotes}landforming{close_quotes} land development opportunity unique to metals mining is described. {open_quotes}Landforming{close_quotes}, wherein the earth`s surface is reconfigured with mining waste rock and tails for the capture of renewable energy, is proposed by the United States Bureau of Mines (USBM) to be ecologically acceptable and, in selected cases, economically superior to conventional mineral extraction, reclamation, and minesite abandonment practices. Landforming is primary land construction that uses mining waste and applies the principles of land overlay architecture. Landforms can be layered, shaped, and configured through the use of binders and plastic sheeting to the engineering specifications necessary for the support of physical structures and passage or retention of fluids. Landforms that are terraced and south facing (in the Northern Hemisphere) are an ideal mount for sun-tracking mirror (heliostat) arrays. In {open_quotes}blue sky{close_quotes}. solar-rich environments, the mirrors can be targeted on a common area to form a {open_quotes}solar furnace.{close_quotes} The heat generated at the focal point of the solar array can be used to flash generate steam and run a turbine electric generator. The solar steam power generation cycle coproducers distilled water that can be sprayed onto the surfaces of the landform to create {open_quotes}greenscape.{close_quotes} Waters not consumed or evaporated in the site greening process percolate into and are stored by the landform if it is underlain with plastic. The landform serves, in effect as a shallow aquifer. The terrace-landform development of mineral properties in remote, infrastructurally destitute areas creates renewable energy, sustainable, electric power-water {open_quotes}oases.{close_quotes} The landform development of mineral properties adjacent to metropolitan areas creates utilities expansions and recreational {open_quotes}greenspace{close_quotes} in areas of growing urban need.

  14. Innovative secondary support technologies for western mines

    SciTech Connect (OSTI)

    Barczak, T.M.; Molinda, G.M.

    1996-12-01

    With the development of the shield support, the primary requirement for successful ground control in longwall mining is to provide stable gate road and bleeder entries. Wood cribbing has been the dominant form of secondary support. However, the cost and limited availability of timber, along with the poor performance of softwood crib supports, has forced western U.S. mines to explore the utilization of other support systems. The recent success of cable bolts has engendered much interest from western operators. Several innovative freestanding support systems have been developed recently including: (1) {open_quotes}The Can{close_quotes} support by Burrell Mining Products International, Inc., (2) Hercules and Link-N-Lock wood cribs and Propsetter by Strata Products (USA) Inc., (3) Variable Yielding Crib and Power Crib supports by Mountainland Support Systems, (4) the Confined Core Crib developed by Southern Utah Fuels Corporation; and (5) the MEGA prop by MBK Hydraulik. This paper assesses design considerations and compares the performance and application of these alternative secondary support systems.

  15. DISPOSAL OF FLUIDIZED BED COMBUSTION ASH IN AN UNDERGROUND MINE TO CONTROL ACID MINE DRAINAGE AND SUBSIDENCE

    SciTech Connect (OSTI)

    Unknown

    2000-10-01

    This project evaluated the technical, economic and environmental feasibility of filling abandoned underground mine voids with coal combustion byproducts. Success was measured in terms of technical feasibility of the approach (i.e. % void filling), cost, environmental benefits (acid mine drainage and subsidence control) and environmental impacts (noxious ion release). Phase 1 of the project was completed in September 1995 and was concerned with the development of the grout and a series of predictive models. These models were verified through the Phase II field phase and will be further verified fin the large scale field demonstration of Phase III. The verification allows the results to be packaged in such a way that the technology can be easily adapted to different site conditions. Phase II was successfully completed with 1000 cubic yards of grout being injected into Anker Energy's Fairfax mine. The grout flowed over 600 feet from a single injection borehole. The grout achieved a compressive strength of over 1000 psi (twice the level that is needed to guarantee subsidence control). Phase III was a full scale test at Anker's eleven acre Longridge mine site. The CCB grout replaced what was an open mine void with a solid so that the groundwater tends to flow around and through the pillars rather than through the previously mined areas. The project has demonstrated that CCBs can be successfully disposed in underground mines. Additionally, the project has shown that filling an abandoned underground mine with CCBs can lead to the reduction and elimination of environmental problems associated with underground mining such as acid mine drainage and subsidence. The filling of the Longridge Mine with 43,000 cubic yards of CCB grout resulted in a 97% reduction in acid mine drainage coming from the mine.

  16. The mine management professions in the twentieth-century Scottish coal mining industry

    SciTech Connect (OSTI)

    Perchard, A.

    2007-07-01

    This book seeks to redress the exclusion of colliery managers and other mining professionals from the history of British, and particularly Scottish, coal industries. This is accomplished by examining these groups within the most crucial period of their ascendancy in the Scottish coal mining industry, 1930-1966. This work seeks to place such persons within their context and to examine their roles, statuses and behaviours through their relationships with employees and the execution of their functions, also examining their terms and conditions of employment, the outlook of their professional associations, and that of their union. Through all this, Dr. Perchard illustrates how this growing consciousness amongst managerial employees in the industry was accompanied by an intense public discussion, within the mining professions, over their future shape, principles and occupational standards.

  17. Long term contracts, expansion, innovation and stability: North Dakota's lignite mines thrive

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2009-08-15

    North Dakota's lignite coal industry is mainly located in three countries in the central part of the state. Its large surface lignite mines are tied through long-term (20-40 years) contracts to power plants. The article talks about operations at three of the most productive mines - the Freedom mine, Falkirk mine and Center Mine. 4 figs.

  18. Tribology of earthmoving, mining, and minerals processing

    SciTech Connect (OSTI)

    Hawk, Jeffrey A.; Wilson, Rick D.

    2001-01-01

    Earthmoving, mining, and minerals processing each involve frequent, and often severe, mechanical interactions between metals, and between metals and abrasive nonmetallic and metallic materials (i.e., mineral bearing ores). The abrasive nature of ores causes significant wear to extracting, handling, and processing equipment. Consequently, wear in earthmoving, mining, and minerals processing operations results in the removal of large amounts of material from the wear surfaces of scraping, digging, and ore processing equipment. From an energy point of view, material wear of this nature is classified as an indirect tribological loss (Imhoff et al., 1985). Additionally, a significant amount of energy is expended to overcome frictional forces in the operation of all earthmoving, mining, and minerals processing machinery (i.e., a direct tribological loss). However, in these particular processes, wear losses are more than five times those of frictional losses. In general, the amount of material lost from a particular component in these operations, before it becomes unserviceable, is far greater than that which can be tolerated in typical metal-to-metal wear situations (e.g., lubricated bearing-shaft wear couples in machinery). Consequently, much of the equipment used in earthmoving, mining, and ore processing makes use of easily replaceable or repairable, and preferably low-cost, wear components. The mechanisms by which metal-to-metal and abrasive wear occurs, and the relationships between material properties and wear behavior, are reasonably well-understood in general terms. However, the specific wear mechanisms/wear material interactions that occur during earthmoving, digging, and the processing of ore are more complex, and depend on the wear material, and on the nature of abrasive, the type of loading, and the environment. As a result of this general knowledge, reliable predictions can be made regarding the performance of particular materials under a range of in

  19. Injury experience in sand and gravel mining, 1990

    SciTech Connect (OSTI)

    Not Available

    1991-12-31

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of sand and gravel mining in the United States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, and occupation. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  20. Injury experience in coal mining, 1983. Informational report

    SciTech Connect (OSTI)

    Not Available

    1985-01-01

    The Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1983. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in the report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries, summary reference tabulations are included at the end of both the operator and the contractor sections of the report.

  1. Injury experience in stone mining, 1991. Information report

    SciTech Connect (OSTI)

    Not Available

    1993-10-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of stone mining in the united States for 1991. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  2. Injury experience in sand and gravel mining, 1992

    SciTech Connect (OSTI)

    Reich, R.B.; Hugler, E.C.

    1994-05-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of sand and gravel mining in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, and occupation. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  3. Injury experience in sand and gravel mining, 1990

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of sand and gravel mining in the United States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, and occupation. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  4. Injury experience in sand and gravel mining, 1989

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of sand and gravel mining in the United States for 1989. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, and occupation. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 38 tabs.

  5. Injury experience in sand and gravel mining, 1991

    SciTech Connect (OSTI)

    Not Available

    1993-10-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of sand and gravel mining in the United States for 1991. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, and occupation. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  6. Instrumentation plan for characterization of subsidence over longwall mining panels at Allen Mine, Weston, Colorado

    SciTech Connect (OSTI)

    O'Rourke, J.

    1980-01-01

    The program includes surface, subsurface, and mine-level instrumentation to monitor subsidence characteristics over two adjacent longwall mining panels, situated in mountainous topography in southern Colorado. An installation plan has been detailed to show numbers and arrangements of instruments in and over the panels, and includes pertinent installation details. The appendix contains technical descriptions of standard features of some of the instrument systems, though in certain cases standard instruments will be modified by Woodward-Clyde Consultants (WCC) or the manufacturer to suit site specific installation requirements detailed on attached drawings. Technical discussions on the application of the instrument arrangements and data monitored to subsidence modeling are given in the report.

  7. Uranium Mining and Milling near Rifle, Colorado | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Uranium Mining and Milling near Rifle, Colorado Uranium Mining and Milling near Rifle, Colorado April 19, 2016 - 4:42pm Addthis What does this project do? Goal 1. Protect Human Health and the Environment The small town of Rifle, Colorado, has an interesting history related to uranium and vanadium production. A mineral found near Rifle, called roscolite, contains both vanadium and uranium but was originally mined and milled for its vanadium content. Union Carbide Corporation began milling the ore

  8. Ex Parte Communications with Caterpillar Global Mining LLC | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy with Caterpillar Global Mining LLC Ex Parte Communications with Caterpillar Global Mining LLC Mr. Medenwaldt inquired, by emails on August 7 and 8, 2012, whether the proposed energy conservation standards rulemaking would affect above ground mobile mining equipment that would have distribution transformers onboard. Ex Parte Communications with Mark Medenwaldt.pdf (10.32 KB) More Documents & Publications Efficiency Improvement Pathway

  9. Effective Conveyor Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    David LaRose

    2006-07-01

    This document details progress on the project ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2005 to May 14, 2006. Highlights include significant improvements in the accuracy and reliability of computer-vision based vulcanized splice detection, deployment of the vulcanized splice detection algorithms for daily use in two working mines, and successful demonstration of an early prototype of a Smart-Camera based system for on-site mechanical splice detection in coal mine installations.

  10. A Demonstration Project for Capturing Geothermal Energy from Mine Waters

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    beneath Butte, MT | Department of Energy A Demonstration Project for Capturing Geothermal Energy from Mine Waters beneath Butte, MT A Demonstration Project for Capturing Geothermal Energy from Mine Waters beneath Butte, MT Project objectives. Demonstrate performance of heat pumps in a large HVAC system in a heating-dominated climate. gshp_gilmore_mine_waters.pdf (1.16 MB) More Documents & Publications Innovative Exploration Technologies Maui Hawaii & Glass Buttes, Oregon Innovative

  11. WIPP's Mine Rescue Teams Lead Competition | Department of Energy

    Office of Environmental Management (EM)

    WIPP's Mine Rescue Teams Lead Competition WIPP's Mine Rescue Teams Lead Competition July 30, 2013 - 12:00pm Addthis WIPP’s mine rescue team members, back row from left, are NWP President and Project Manager Farok Sharif; Heath Fowler; Manny Marquez; Mat Ridgway; Gary Kessler; Curtis Sanders, III; Jim Pierce; Tony Mihelic; Joe Baca; Justin Bailey; Ty Zimmerly; Fabian Carrasco; Chauncey Ortega; Nico Dominguez; and CBFO Manager Joe Franco. In front are Richard West, team trainer; and Ann

  12. Determining the research needs of the surface coal mining industry

    SciTech Connect (OSTI)

    Zell, L.M.

    1982-12-01

    This paper reveals avenues open to the coal industry to help gain technology and research information needed to meet the requirements of the Surface Mining Control and Reclamation Act of 1977. It discusses projects of the Department of Energy's (DOE) Office of Coal Mining and the Mining and Reclamation Council of America (MARC) to help meet the environmental needs as well as the coal industry needs.

  13. Defense-Related Uranium Mines Report to Congress (August 2014) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Defense-Related Uranium Mines Report to Congress (August 2014) Defense-Related Uranium Mines Report to Congress (August 2014) Section 3151 of the National Defense Authorization Act for Fiscal Year 2013 directed the Secretary of Energy, in consultation with the Secretary of the Interior and the Administrator of the U.S. Environmental Protection Agency (EPA), to undertake a review of, and prepare a report on, abandoned uranium mines in the United States that provided

  14. CMI at Mines Hosts 160 Sixth Graders | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CMI at Mines Hosts 160 Sixth Graders Colorado School of Mines graduate student Mandi Hutchinson shows a compact fluorescent light bulb as she discusses the use of critical materials and rare earths in current technologies. The Denver School of Science and Technology's (DSST) College View sixth graders visited the Colorado School of Mines campus on Wednesday, July 8, for their fourth annual visit. More than 160 students enjoyed critical materials and energy presentations delivered by the Critical

  15. CMI Education Partner: Colorado School of Mines | Critical Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute Education Partner: Colorado School of Mines Colorado School of Mines offers courses in several areas: Geology Engineering/Geochemistry Mining Engineering Metallurgical Engineering/Materials Science Chemistry Engineering Mineral Economics and Business Geology Engineering/Geochemistry GEGN101. EARTH AND ENVIRONMENTAL SYSTEMS. 4.0 Hours. (I, II, S) Fundamental concepts concerning the nature, composition and evolution of the lithosphere, hydrosphere, atmosphere and biosphere of the

  16. Colorado School of Mines Technology Marketing Summaries - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Colorado School of Mines Technology Marketing Summaries Here you'll find marketing summaries for technologies available for licensing from the Colorado School of Mines (CSM). The summaries provide descriptions of the technologies including their benefits, applications and industries, and development stage. Colorado School of Mines 14 Technology Marketing Summaries Category Title and Abstract Laboratories Date Hydrogen and Fuel Cell Find More Like This Process for Preparing Palladium

  17. Abandoned Uranium Mine Technical Services and Cleanup Industry...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Abandoned Uranium Mine Technical Services and Cleanup Industry Day In January 2015, the United States (U.S.) and the Anadarko Litigation Trust ("Litigation Trust") entered into a...

  18. Mining and Minerals Policy Act of 1970 | Open Energy Information

    Open Energy Info (EERE)

    Act, this statute encompasses both hard rock mining and oil and gas and established modern federal policy regarding mineral resources in the United States. The Act articulates a...

  19. Application of the directional hydraulic fracturing at Berezovskaya Mine

    SciTech Connect (OSTI)

    Lekontsev, Y.M.; Sazhin, P.V.

    2008-05-15

    The paper analyzes the experimental research of the directional hydraulic fracturing applied for weakening of rocks at Berezovskaya Mine (Kuznetsk Coal Basin) in 2005-2006.

  20. Complementary influence functions for predicting subsidence caused by mining

    SciTech Connect (OSTI)

    Sutherland, H.J.; Munson, D.E.

    1982-01-01

    Surface subsidence caused by underground mining is described through complementary influence functions. The complementary functions developed here differ from the simple functions previously used in that the surface displacement is the result of the combined contributions of the mined and unmined zones. This eliminates computational difficulties experienced with the simple functions in determining the deflections above the rib side and in the eventual application of influence functions to complex room-and-pillar configurations. Although the analysis framework presented is intended for predicting subsidence over complex mine configurations, use of the complementary functions is illustrated adequately by application to a longwall panel of the Old Ben No. 24 coal mine.

  1. Assessment of arsenic speciation and bioaccessibility in mine...

    Office of Scientific and Technical Information (OSTI)

    Title: Assessment of arsenic speciation and bioaccessibility in mine-impacted materials Authors: Ollson, Cameron J. ; Smith, Euan ; Scheckel, Kirk G. ; Betts, Aaron R. ; Juhasz, ...

  2. WIPP Mine Rescue Team Sweeps Southeast Missouri Competition

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in a mine maintained by the University of Missouri at Rolla. Individually, WIPP's Joe Baca won the bench competition, with teammate Richard West placing third. The benchman...

  3. Development Wells At Salt Wells Area (Nevada Bureau of Mines...

    Open Energy Info (EERE)

    (Nevada Bureau of Mines and Geology, 2009) Exploration Activity Details Location Salt Wells Geothermal Area Exploration Technique Development Drilling Activity Date 2005 - 2005...

  4. Nippon Mining Holdings Inc aka Shinnikko | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Nippon Mining Holdings Inc (aka Shinnikko) Place: Tokyo, Japan Zip: 105-0001 Product: Japanese holding company engaged in oil, metals, and...

  5. Mining Graphs for Understanding Time-Varying Volumetric Data...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Mining Graphs for Understanding ... DOE Contract Number: AC02-06CH11357 Resource Type: Journal Article Resource Relation: ...

  6. Alternative Fuels - A New Field For Mine Surveying | Open Energy...

    Open Energy Info (EERE)

    more importance. As far as Germany is concerned, geothermal energy and coal bedmine methane are considered as mineral resources according to the German mining law. This demands...

  7. Vendors boot up a new generation of mining software

    SciTech Connect (OSTI)

    Carter, R.A.

    2008-10-15

    From complete mine management down to the smallest detail of process or machine design, the latest programs are claimed to process and display data easier, faster, and more accurately. MINExpo 2008 held in Las Vegas in September offered a bonanza of information on complete mine management to specilaized financial modules. Gemcom Software introduced new versions of five of its key products - Surpac 6.1, GEMS 6.2, Minex 5.3, MinerSched 6.0 and Whittle 4.2. Lerca Geosystems launched its Jigsaw 360 mine management suite, encompassing GPS navigation. Products launched by Modular Mining systems, Carlson Software, DEM Solutions and Logimine are also mentioned. 2 figs.

  8. MineSeis - A MATLAB@ GUI Program to

    Office of Scientific and Technical Information (OSTI)

    i MineSeis - A MATLAB@ GUI Program to Calculate Synthetic Seismograms from a Linear, ... The program was written with MATLAB Graphical User Interface (GUI) technique ...

  9. Famur delivers longwall system to Russian coal mine

    SciTech Connect (OSTI)

    2008-08-15

    The first complete Polish longwall system that was recently delivered to Russia for mining coal seams with a thickness exceeding 5 m is described. 2 photos.

  10. Westinghouse Earns 15th Consecutive Mine Safety Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for profit. This award recognizes Westinghouse's close attention to safety in a mining environment. WTS is the management and operating contractor for the DOE at the Waste...

  11. General Mining Act of 1872 | Open Energy Information

    Open Energy Info (EERE)

    1872 Year 1890 Url Generalmininglaw1872.jpg Description The seminal law regarding mineral management on federal lands in the United States. References General Mining Act of 18721...

  12. Simulations of the OzDES AGN reverberation mapping project

    SciTech Connect (OSTI)

    King, Anthea L.; Martini, Paul; Davis, Tamara M.; Denney, K. D.; Kochanek, C. S.; Peterson, Bradley M.; Skielboe, Andreas; Vestergaard, Marianne; Huff, Eric; Watson, Darach; Banerji, Manda; McMahon, Richard; Sharp, Rob; Lidman, C.

    2015-08-26

    As part of the Australian spectroscopic dark energy survey (OzDES) we are carrying out a large-scale reverberation mapping study of ~500 quasars over five years in the 30 deg2 area of the Dark Energy Survey (DES) supernova fields. These quasars have redshifts ranging up to 4 and have apparent AB magnitudes between 16.8 mag < r < 22.5 mag. The aim of the survey is to measure time lags between fluctuations in the quasar continuum and broad emission-line fluxes of individual objects in order to measure black hole masses for a broad range of active galactic nuclei (AGN) and constrain the radius–luminosity (R–L) relationship. Here we investigate the expected efficiency of the OzDES reverberation mapping campaign and its possible extensions. We expect to recover lags for ~35–45 % of the quasars. AGN with shorter lags and greater variability are more likely to yield a lag measurement, and objects with lags ≲6 months or ~1 yr are expected to be recovered the most accurately. The baseline OzDES reverberation mapping campaign is predicted to produce an unbiased measurement of the R–L relationship parameters for Hβ, MgIIλ2798, and C IVλ1549. As a result, extending the baseline survey by either increasing the spectroscopic cadence, extending the survey season, or improving the emission-line flux measurement accuracy will significantly improve the R–L parameter constraints for all broad emission lines.

  13. Improving mine safety technology and training in the U.S. recommendations of the Mine Safety Technology and Training Commission

    SciTech Connect (OSTI)

    Grayson, R. Larry

    2008-09-15

    The key issues studied focused on underground coal mining and included (1) prevention of explosions in sealed areas, (2) better emergency preparedness and response, (3) improvement of miners' ability to escape, (4) better protection of miners before and after a fire or explosion, (5) improved provision of oxygen, and (6) development and implementation of more robust post-incident communication. The U.S. Congress passed the Mine Improvement and New Emergency Response Act of 2006, which mandated new laws to address the issues. Concurrent with investigations and congressional deliberations, the National Mining Association formed the independent Mine Safety Technology and Training Commission to study the state-of-the-art relative to technology and training that could address the vulnerabilities exposed by the mine disasters. As discussed, the report outlined persistent vulnerabilities linked with significant hazards in underground coal mines, and made recommendations to provide a path for addressing them. Overall the commission report made 75 recommendations in the areas of risk-based design and management, communications technology, emergency response and mine rescue procedures, training for preparedness, and escape and protection strategies. In its deliberations, the commission importantly noted that mine safety in the U.S. needs to follow a new paradigm for ensuring mine safety and developing a culture of prevention that supports safe production at the business core. In the commission's viewpoint, the bottom line in protecting coal miners is not only adopting a culture of prevention but also systematically pursuing mitigation of significant risks. 4 refs., 2 figs.

  14. Gauging apparatus and method, particularly for controlling mining by a mining machine

    SciTech Connect (OSTI)

    Campbell, J.A.; Moynihan, D.J.

    1980-04-29

    Apparatus for and method are claimed for controlling the mining by a mining machine of a seam of material (e.g., coal) overlying or underlying a stratum of undesired material (e.g., clay) to reduce the quantity of undesired material mined with the desired material, the machine comprising a cutter movable up and down and adapted to cut down into a seam of coal on being lowered. The control apparatus comprises a first electrical signal constituting a slow-down signal adapted to be automatically operated to signal when the cutter has cut down into a seam of desired material generally to a predetermined depth short of the interface between the seam and the underlying stratum for slowing down the cutting rate as the cutter approaches the interface, and a second electrical signal adapted to be automatically operated subsequent to the first signal for signalling when the cutter has cut down through the seam to the interface for stopping the cutting operation, thereby to avoid mining undesired material with the desired material. Similar signalling may be provided on an upward cut to avoid cutting into the overlying stratum.

  15. PHOTOMETRIC ANALYSIS OF HS Aqr, EG Cep, VW LMi, AND DU Boo

    SciTech Connect (OSTI)

    Djurasevic, G.; Latkovic, O.; Bastuerk, Oe.; Y Latin-Small-Letter-Dotless-I lmaz, M.; Cal Latin-Small-Letter-Dotless-I skan, S.; Senavc Latin-Small-Letter-Dotless-I , H. V.; K Latin-Small-Letter-Dotless-I l Latin-Small-Letter-Dotless-I coglu, T.; Ekmekci, F.; Tanr Latin-Small-Letter-Dotless-I verdi, T.

    2013-03-15

    We analyze new multicolor light curves for four close late-type binaries: HS Aqr, EG Cep, VW LMi, and DU Boo, in order to determine the orbital and physical parameters of the systems and estimate the distances. The analysis is done using the modeling code of G. Djurasevic, and is based on up-to-date measurements of spectroscopic elements. All four systems have complex, asymmetric light curves that we model by including bright or dark spots on one or both components. Our findings indicate that HS Aqr and EG Cep are in semi-detached, while VW LMi and DU Boo are in overcontact configurations.

  16. DOE - Office of Legacy Management -- E I Du Pont - NJ 06

    Office of Legacy Management (LM)

    - NJ 06 FUSRAP Considered Sites E.I. Dupont, NJ Alternate Name(s): E.I. Du Pont De Nemours and Company E.I. Du Pont Company Dupont Chambers Works Plant NJ.06-1 NJ.06-5 Location: Pennsville and Carney Townships, Southeast bank of the Delaware River, Deepwater, New Jersey NJ.06-5 Historical Operations: Development of a process for converting uranium oxide to uranium tetraflouride, production of uranium tetraflouride, research into conversion of uranium oxide to uranium metal, and production of

  17. Acid mine water aeration and treatment system

    DOE Patents [OSTI]

    Ackman, Terry E.; Place, John M.

    1987-01-01

    An in-line system is provided for treating acid mine drainage which basically comprises the combination of a jet pump (or pumps) and a static mixer. The jet pump entrains air into the acid waste water using a Venturi effect so as to provide aeration of the waste water while further aeration is provided by the helical vanes of the static mixer. A neutralizing agent is injected into the suction chamber of the jet pump and the static mixer is formed by plural sections offset by 90 degrees.

  18. Options for developing countries in mining development

    SciTech Connect (OSTI)

    Walrond, G.W.; Kumar, R.

    1985-01-01

    This book is a study of the issues that developing countries face in planning and implementing mineral development, taking as case studies Botswana, Sierra Leone, Zambia, Tanzania, Malaysia, Papua New Guinea and the developed states of Quebec and Western Australia. The authors consider the major aspects of the matter including organization and administration; regulation; taxation and surplus distribution; the dynamics of such instruments as royalty, rent resource tax and capital allowances under various cost/price scenarios; and selected mining agreements and their key provisions. They stress throughout the need for foreign investment while maximizing the economic benefits reaped from exhaustible resources.

  19. Patent data mining method and apparatus

    DOE Patents [OSTI]

    Boyack, Kevin W.; Grafe, V. Gerald; Johnson, David K.; Wylie, Brian N.

    2002-01-01

    A method of data mining represents related patents in a multidimensional space. Distance between patents in the multidimensional space corresponds to the extent of relationship between the patents. The relationship between pairings of patents can be expressed based on weighted combinations of several predicates. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the patents.

  20. NAFTA opportunities: Bituminous coal and lignite mining

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The North American Free Trade Agreement (NAFTA) secures and improves market access in Mexico and Canada for the United States bituminous coal and lignite mining sector. Canada is one of the United States' largest export markets for bituminous coal and lignite, with exports of $486.7 million in 1992. Conversely, the Mexican market is one of the smallest export markets for U.S. producers with exports of $1.8 million in 1992. Together, however, Canada and Mexico represent approximately 15 percent of total U.S. coal exports. The report presents a sectoral analysis.

  1. Uranium Mining, Conversion, and Enrichment Industries

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis of Potential Impacts of Uranium Transfers on the Domestic Uranium Mining, Conversion, and Enrichment Industries May 1, 2015 ii EXECUTIVE SUMMARY: The Department of Energy ("Department" or "DOE") plans to transfer the equivalent of up to 2,100 metric tons ("MTU") of natural uranium per year (with a higher total for calendar year 2015, mainly because of transfers already executed or under way before today's determination). These transfers would include 1,600

  2. Inflatable partition for fighting mine fires

    DOE Patents [OSTI]

    Conti, Ronald S.; Lazzara, Charles P.

    1995-01-01

    The seal is a lightweight, inflatable, bag which may be inflated by a portable air generator and is used to seal a burning mine passage. A collapsible tube-like aperture extends through the seal and allows passage of high expansion foam through the seal in a feed tube. The foam fills the passageway and extinguishes the fire. In other embodiments, the feed tubes incorporate means to prevent collapse of the aperture. In these embodiments a shroud connects the feed tube to a foam generator. This seal allows creation of a high expansion foam fire fighting barrier even in upward sloping passages.

  3. Mining industry and US government cooperative research: Lessons learned and benefits to mining industry

    SciTech Connect (OSTI)

    Pearson, D.C.; Stump, B.W.; Phillips, W.S.; Martin, R.; Anderson, D.P.

    1997-09-01

    Since 1994, various mines in the US have cooperated with research scientists at the Los Alamos and Lawrence Livermore National Laboratories to address issues related to verification of the Comprehensive Test Ban Treaty (CTBT). The CTBT requires that no country may conduct any nuclear explosion in the future. While the CTBT is a significant step toward reducing the global nuclear danger, verifying compliance with the treat requires that the monitoring system be able to detect, locate and identify much larger numbers of smaller amplitude seismic events than had been required previously. Large mining blasts conducted world-wide will be of sufficient amplitude to trigger the monitoring system at the lower threshold. It is therefore imperative that research into the range various blasting practices employed, the relationship of yield to seismic magnitude, and identification of anomalous blasting results be performed. This paper will describe a suite of experiments funded by the Department of Energy and conducted by the Los Alamos and Lawrence Livermore National Laboratories in cooperation with the US mining industry. Observations of cast blasting, underground long wall generated coal bumps, stoping, and explosively induced collapse of room and pillar panels will be presented. Results of these dual use experiments which are of interest to the mining community will be discussed. These include (1) variation of amplitude of seismic energy at various azimuths from cast blasts, (2) identification of the extent of back failure following explosive removal of pillars, and (3) the use of single fired shots for calibration of the monitoring system. The wealth of information and discovery described in this paper is a direct result of mutual cooperation between the US Government and the US Mining Industry.

  4. MSHA (Mine Safety and Health Administration) approved mine rescue - training module (coal): fires, fire fighting, and explosions. Mine rescue team series

    SciTech Connect (OSTI)

    Not Available

    1984-01-01

    Mine rescue teams frequently must fight fires and guard against the propagation of fires or explosions during a rescue and recovery operation. The team's ability to fight fires depends a great deal on hands-on experience with different fire fighting agents and equipment. The team's work includes an assessment of fire conditions, mine fire gases and other potential hazards associated with fire fighting activity. This training module covers the underlying principles of the fire triangle and the different methods for controlling, containing and extinguishing fires in a mine. The manual also covers fire-fighting equipment, considerations involved in a sealing operation and the cause-effect of explosions.

  5. Temporal Shifts in the Geochemistry and Microbial Community Structure of an Ultradeep Mine Borehole Following Isolation

    SciTech Connect (OSTI)

    Moser, Duane P. ); Onstott, T C.; Fredrickson, Jim K. ); Brockman, Fred J. ); Balkwill, David L.; Drake, G R.; Pfiffner, S; White, D C.; Takai, K Project Japan); Pratt, L M.; Fong, J; Lollar, B S.; Slater, G; Phelps, T J. ); Spoelstra, N ); Deflaun, M; Southam, G; Welty, A T.; Baker, B J.; Hoek, J

    2003-12-01

    A borehole draining a water-bearing dyke fracture at 3.2 km depth in a South African Au mine was isolated from the open mine environment...

  6. WIPP Employee Inducted Into Mine Rescue Hall of Fame - WIPP Teams...

    Office of Environmental Management (EM)

    Employee Inducted Into Mine Rescue Hall of Fame - WIPP Teams Recognized at National Competition WIPP Employee Inducted Into Mine Rescue Hall of Fame - WIPP Teams Recognized at ...

  7. WIPP's Mine Rescue Teams Win Big in Contest | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WIPP's Mine Rescue Teams Win Big in Contest WIPP's Mine Rescue Teams Win Big in Contest April 27, 2016 - 12:50pm Addthis The WIPP Blue Mine Rescue Team moves through the course in the field competition of the Southwest Regional Mine Rescue Contest. The WIPP Blue Mine Rescue Team moves through the course in the field competition of the Southwest Regional Mine Rescue Contest. WIPP’s Red Mine Rescue Team took first place in the first aid competition. WIPP's Red Mine Rescue Team took first

  8. Mining Bug Databases for Unidentified Software Vulnerabilities

    SciTech Connect (OSTI)

    Dumidu Wijayasekara; Milos Manic; Jason Wright; Miles McQueen

    2012-06-01

    Identifying software vulnerabilities is becoming more important as critical and sensitive systems increasingly rely on complex software systems. It has been suggested in previous work that some bugs are only identified as vulnerabilities long after the bug has been made public. These vulnerabilities are known as hidden impact vulnerabilities. This paper discusses the feasibility and necessity to mine common publicly available bug databases for vulnerabilities that are yet to be identified. We present bug database analysis of two well known and frequently used software packages, namely Linux kernel and MySQL. It is shown that for both Linux and MySQL, a significant portion of vulnerabilities that were discovered for the time period from January 2006 to April 2011 were hidden impact vulnerabilities. It is also shown that the percentage of hidden impact vulnerabilities has increased in the last two years, for both software packages. We then propose an improved hidden impact vulnerability identification methodology based on text mining bug databases, and conclude by discussing a few potential problems faced by such a classifier.

  9. Brine disposal process for Morcinek coal mine

    SciTech Connect (OSTI)

    Tait, J.H.

    1995-04-01

    This paper describes the work to develop a commercial brine disposal process for the Morcinek mine, located 45 km south of the city of Katowice in Poland. Currently, brine is discharged into the Odra river and methane from the mine is released into the atmosphere. The process would use the released methane and convert a large percentage of the brine into potable water for commercial use. Thus, the proposed process has two environmental benefits. The brine salinity is about 31,100 ppm. Major brine components are Na (10,300 ppm), Ca (1,170 ppm), Mg (460 ppm), Cl (18,500 ppm) and SO{sub 4}{sup 2-} (252 ppm). Present in smaller amounts are K, S, Sr, B, Ba and NO{sub 3}. The process integrates a reverse osmosis (RO) unit and a submerged combustion evaporator. Extensive studies made at the Lawrence Livermore National Laboratory established the pretreatment method of the brine before it enters the RO unit. Without adequate pretreatment, mineral phases in the brine would become super-saturated and would precipitate in the RO unit. The pretreatment consists of first adding sodium carbonate to increase both the pH and the carbonate concentration of the brine. This addition causes precipitation of carbonate solids containing Ca, Mg, Sr, and Ba. After filtration of these precipitates, the fluid is acidified with HCl to prevent precipitation in the RO unit as the brine increases in salinity.

  10. SkyMine Carbon Mineralization Pilot Project

    SciTech Connect (OSTI)

    Joe Jones; Clive Barton; Mark Clayton; Al Yablonsky; David Legere

    2010-09-30

    This Topical Report addresses accomplishments achieved during Phase 1 of the SkyMine{reg_sign} Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO{sub 2} from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO{sub 2} to products having commercial value (i.e., beneficial use), show the economic viability of the CO{sub 2} capture and conversion process, and thereby advance the technology to a point of readiness for commercial scale demonstration and proliferation. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at commercial scale. The primary objectives of Phase 1 of the project were to elaborate proven SkyMine{reg_sign} process chemistry to commercial pilot-scale operation and complete the preliminary design ('Reference Plant Design') for the pilot plant to be built and operated in Phase 2. Additionally, during Phase 1, information necessary to inform a DOE determination regarding NEPA requirements for the project was developed, and a comprehensive carbon lifecycle analysis was completed. These items were included in the formal application for funding under Phase 2. All Phase 1 objectives were successfully met on schedule and within budget.

  11. Bioreactor for acid mine drainage control

    DOE Patents [OSTI]

    Zaluski, Marek H.; Manchester, Kenneth R.

    2001-01-01

    A bioreactor for reacting an aqueous heavy metal and sulfate containing mine drainage solution with sulfate reducing bacteria to produce heavy metal sulfides and reduce the sulfuric acid content of the solution. The reactor is an elongated, horizontal trough defining an inlet section and a reaction section. An inlet manifold adjacent the inlet section distributes aqueous mine drainage solution into the inlet section for flow through the inlet section and reaction section. A sulfate reducing bacteria and bacteria nutrient composition in the inlet section provides sulfate reducing bacteria that with the sulfuric acid and heavy metals in the solution to form solid metal sulfides. The sulfate reducing bacteria and bacteria nutrient composition is retained in the cells of a honeycomb structure formed of cellular honeycomb panels mounted in the reactor inlet section. The honeycomb panels extend upwardly in the inlet section at an acute angle with respect to the horizontal. The cells defined in each panel are thereby offset with respect to the honeycomb cells in each adjacent panel in order to define a tortuous path for the flow of the aqueous solution.

  12. SkyMine Carbon Mineralization Pilot Project

    SciTech Connect (OSTI)

    Christenson, Norm; Walters, Jerel

    2014-12-31

    This Topical Report addresses accomplishments achieved during Phase 2b of the SkyMine® Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO2 from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO2 to products having commercial value (i.e., beneficial use), show the economic viability of the CO2 capture and conversion process, and thereby advance the technology to the point of readiness for commercial scale demonstration and deployment. The overall process is carbon negative, resulting in mineralization of CO2 that would otherwise be released into the atmosphere. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at the commercial scale. The project is being conducted in two phases. The primary objectives of Phase 1 were to evaluate proven SkyMine® process chemistry for commercial pilot-scale operation and complete the preliminary design for the pilot plant to be built and operated in Phase 2, complete a NEPA evaluation, and develop a comprehensive carbon life cycle analysis. The objective of Phase 2b was to build the pilot plant to be operated and tested in Phase 2c.

  13. Electric shovels meet the demands for mining operations

    SciTech Connect (OSTI)

    Fiscor, S.

    2008-03-15

    Rugged, intelligent shovels offer better productivity and help mine operators avoid costly downtime in a very tight market. In 2007 P & H Mining Equipment began to produce a new breed of electric mining shovels designed to help reduce operating cost in coal and other mining operations. These were designated the P & H C-Series. All have an advanced communication, command and control system called the Centurion system. Coal mining applications for this series include 4100XPCs in Australia, China and Wyoming, USA. The Centurion system provides information on shovel performance and systems health which is communicated via graphic user interface terminals to the operators cab. Bucyrus International is developing a hydraulic crowd mechanism for its electric shovels and is now field testing one for its 495 series shovel. The company has also added greater capability in the primary software in the drive system for troubleshooting and fault identification to quickly diagnose problems onboard or remotely. 4 photos.

  14. Subsidence vulnerability in shallow room-and-pillar mines

    SciTech Connect (OSTI)

    Missavage, R.

    1985-07-01

    Concern over mining-related subsidence is inhibiting the development of surface land uses in previously mined areas and is constraining the recovery of coal resources in areas with established land uses that might be impacted by subsequent subsidence. The determination of subsidence vulnerability of mined-out areas (especially abandoned mine areas) can be a useful tool in the design and location of surface structures. A model has been developed for assessing subsidence vulnerability in shallow room-and-pillar mines based on the flexural rigidity and strength characteristics of the overlying strata. The model does not predict the subsidence profile or when the subsidence will occur. It only predicts those areas that are likely to subside. This paper briefly describes the model and its testing.

  15. Concept for the Intermountain Center for Mining Research and Development

    SciTech Connect (OSTI)

    Not Available

    2005-06-01

    The Intermountain Center for Mining Research and Development (ICMRD) was established with the Idaho National Laboratory (INL) as the cornerstone, and with regional universities, mining schools, and the Western mining industry as full members. In aggregate, the members provide the strong mining research and development capabilities and knowledge that are essential to the success of such a research center. The ICMRD is an organization that identifies technical needs, partially funds, and provides project management for research projects. The ICMRD will primarily serve the nine Intermountain States, but will not restrict other regions, research organizations, or academic institutions from membership. The ICMRD's nine primary states are: Idaho, Montana, Wyoming, Utah, Colorado, Nevada, Arizona, Alaska, and New Mexico. The business and project management functions of the ICMRD will be located at INL. Research projects may be performed by INL, one of the member research organizations, academic institutions, mining companies/suppliers, or preferably, by a partnership of several of these institutions. Teaming among members will be essential in providing quality R&D. The ICMRD will accomplish its research goals by creating partnerships between the research organizations, federal and state agencies, and the mining industry. The ICMRD will provide project management, technical and financial support, and technology transfer opportunities. The ICMRD, through its associated academic partners, will provide a base for development and testing of mining, metallurgical, and environmental technologies in the laboratory through pilot-scale environments. Through these partnerships, the ICMRD will provide a vehicle to achieve its objectives of developing innovative mining technologies, enhancing the capabilities of the regional mining schools and universities, and improving the global competitiveness of the U.S. mining industry.

  16. DuPont extends CFC production after EPA warns of scarcity

    SciTech Connect (OSTI)

    Kirschner, E.

    1994-01-05

    DuPont reversed its voluntary commitment to phase out CFC production at the end of 1994 to prevent a possible shortage for automotive air conditioning repairs. In a December letter, the US EPA asked Dupont to continue producing its full 1995 allowance of 76 million tons of CFC-12 under the Montreal Protocol.

  17. The DES Science Verification Weak Lensing Shear Catalogs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jarvis, M.

    2016-05-01

    We present weak lensing shear catalogs for 139 square degrees of data taken during the Science Verification (SV) time for the new Dark Energy Camera (DECam) being used for the Dark Energy Survey (DES). We describe our object selection, point spread function estimation and shear measurement procedures using two independent shear pipelines, IM3SHAPE and NGMIX, which produce catalogs of 2.12 million and 3.44 million galaxies respectively. We also detail a set of null tests for the shear measurements and find that they pass the requirements for systematic errors at the level necessary for weak lensing science applications using the SVmore » data. Furthermore, we discuss some of the planned algorithmic improvements that will be necessary to produce sufficiently accurate shear catalogs for the full 5-year DES, which is expected to cover 5000 square degrees.« less

  18. The DES Science Verification Weak Lensing Shear Catalogs

    SciTech Connect (OSTI)

    Jarvis, M.

    2015-07-20

    We present weak lensing shear catalogs for 139 square degrees of data taken during the Science Verification (SV) time for the new Dark Energy Camera (DECam) being used for the Dark Energy Survey (DES). We describe our object selection, point spread function estimation and shear measurement procedures using two independent shear pipelines, IM3SHAPE and NGMIX, which produce catalogs of 2.12 million and 3.44 million galaxies respectively. We also detail a set of null tests for the shear measurements and find that they pass the requirements for systematic errors at the level necessary for weak lensing science applications using the SV data. Furthermore, we discuss some of the planned algorithmic improvements that will be necessary to produce sufficiently accurate shear catalogs for the full 5-year DES, which is expected to cover 5000 square degrees.

  19. Partager : des technologies de pointe au service de la société

    ScienceCinema (OSTI)

    None

    2011-10-06

    Médecine, climatologie, métrologie et informatique, les techniques utilisées par le LHC trouvent déjà des répercussions dans d?autres domaines scientifiques. Utilisant des techniques inédites, la physique des particules en fait bénéficier la société toute entière.

  20. Simulations of the OzDES AGN reverberation mapping project

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    King, Anthea L.; Martini, Paul; Davis, Tamara M.; Denney, K. D.; Kochanek, C. S.; Peterson, Bradley M.; Skielboe, Andreas; Vestergaard, Marianne; Huff, Eric; Watson, Darach; et al

    2015-08-26

    As part of the Australian spectroscopic dark energy survey (OzDES) we are carrying out a large-scale reverberation mapping study of ~500 quasars over five years in the 30 deg2 area of the Dark Energy Survey (DES) supernova fields. These quasars have redshifts ranging up to 4 and have apparent AB magnitudes between 16.8 mag < r < 22.5 mag. The aim of the survey is to measure time lags between fluctuations in the quasar continuum and broad emission-line fluxes of individual objects in order to measure black hole masses for a broad range of active galactic nuclei (AGN) and constrainmore » the radius–luminosity (R–L) relationship. Here we investigate the expected efficiency of the OzDES reverberation mapping campaign and its possible extensions. We expect to recover lags for ~35–45 % of the quasars. AGN with shorter lags and greater variability are more likely to yield a lag measurement, and objects with lags ≲6 months or ~1 yr are expected to be recovered the most accurately. The baseline OzDES reverberation mapping campaign is predicted to produce an unbiased measurement of the R–L relationship parameters for Hβ, MgIIλ2798, and C IVλ1549. As a result, extending the baseline survey by either increasing the spectroscopic cadence, extending the survey season, or improving the emission-line flux measurement accuracy will significantly improve the R–L parameter constraints for all broad emission lines.« less

  1. QER SECOND INSTALLMENT REGIONAL MEETING--DES MOINES, IOWA | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy DES MOINES, IOWA QER SECOND INSTALLMENT REGIONAL MEETING--DES MOINES, IOWA MEETING DATE AND LOCATION Friday, May 6, 2016 Doors open: 8:00 AM, Program begins: 8:30 AM State Historical Building 600 East Locust Street Des Moines, IA 50319 Watch the May 6th Des Moines regional meeting here. MEETING INFORMATION The Quadrennial Energy Review Task Force will host a public stakeholder meeting on the second installment of the Quadrennial Energy Review (QER), an integrated study of the U.S.

  2. CMB lensing tomography with the DES Science Verification galaxies

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Giannantonio, T.

    2016-01-07

    We measure the cross-correlation between the galaxy density in the Dark Energy Survey (DES) Science Verification data and the lensing of the cosmic microwave background (CMB) as reconstructed with the Planck satellite and the South Pole Telescope (SPT). When using the DES main galaxy sample over the full redshift range 0.2 < zphot < 1.2, a cross-correlation signal is detected at 6σ and 4σ with SPT and Planck respectively. We then divide the DES galaxies into five photometric redshift bins, finding significant (>2σ) detections in all bins. Comparing to the fiducial Planck cosmology, we find the redshift evolution of themore » signal matches expectations, although the amplitude is consistently lower than predicted across redshift bins. We test for possible systematics that could affect our result and find no evidence for significant contamination. Finally, we demonstrate how these measurements can be used to constrain the growth of structure across cosmic time. We find the data are fit by a model in which the amplitude of structure in the z < 1.2 universe is 0.73 ± 0.16 times as large as predicted in the LCDM Planck cosmology, a 1.7σ deviation.« less

  3. Cosmology from Cosmic Shear with DES Science Verification Data

    SciTech Connect (OSTI)

    Abbott, T.

    2015-07-20

    We present the first constraints on cosmology from the Dark Energy Survey (DES), using weak lensing measurements from the preliminary Science Verification (SV) data. We use 139 square degrees of SV data, which is less than 3% of the full DES survey area. Using cosmic shear 2-point measurements over three redshift bins we find ?8(m=0.3)0.5 = 0:81 0:06 (68% confidence), after marginalising over 7 systematics parameters and 3 other cosmological parameters. Furthermore, we examine the robustness of our results to the choice of data vector and systematics assumed, and find them to be stable. About 20% of our error bar comes from marginalising over shear and photometric redshift calibration uncertainties. The current state-of-the-art cosmic shear measurements from CFHTLenS are mildly discrepant with the cosmological constraints from Planck CMB data. Our results are consistent with both datasets. Our uncertainties are ~30% larger than those from CFHTLenS when we carry out a comparable analysis of the two datasets, which we attribute largely to the lower number density of our shear catalogue. We investigate constraints on dark energy and find that, with this small fraction of the full survey, the DES SV constraints make negligible impact on the Planck constraints. The moderate disagreement between the CFHTLenS and Planck values of ?8(?m=0.3)0.5 is present regardless of the value of w.

  4. A waterjet mining machine for use in room and pillar mining operations

    SciTech Connect (OSTI)

    Summers, D.A.

    1990-06-01

    A new mining machine is constructed for use in room and pillar mining operations. This machine uses the action of computer controlled, centrally located high pressure cutting lances to cut deep slots in a coal face. These slots stress relieve the coal ahead of the machine and outline blocks of coal. The movement forward of the machine then wedges up the lower block of coal. This wedging action is assisted by the gathering arms of the loader section of the machine, and by underlying oscillating waterjets which create a slot ahead of the loading wedge as it advances. Finally the top section of coal is brought down by the sequential advance of wedge faced roof support members, again assisted by the waterjet action from the central cutting arms. The machine is designed to overcome major disadvantages of existing room and pillar mining machines in regard to a reduction in respirable dust, the creation of an immediate roof support, and an increase in product size, with concomitant reduction in cleaning costs.

  5. Aquatic Ecosystem Enhancement at Mountaintop Mining Sites Symposium

    SciTech Connect (OSTI)

    Black, D. Courtney; Lawson, Peter; Morgan, John; Maggard, Randy; Schor, Horst; Powell, Rocky; Kirk, Ed. J.

    2000-01-12

    Welcome to this symposium which is part of the ongoing effort to prepare an Environmental Impact Statement (EIS) regarding mountaintop mining and valley fills. The EIS is being prepared by the U.S. Environmental Protection Agency, U.S. Army Corps of Engineers, U.S. Office of Surface Mining, and U.S. Fish and Wildlife Service, in cooperation with the State of West Virginia. Aquatic Ecosystem Enhancement (AEE) at mountaintop mining sites is one of fourteen technical areas identified for study by the EIS Interagency Steering Committee. Three goals were identified in the AEE Work Plan: 1. Assess mining and reclamation practices to show how mining operations might be carried out in a way that minimizes adverse impacts to streams and other environmental resources and to local communities. Clarify economic and technical constraints and benefits. 2. Help citizens clarify choices by showing whether there are affordable ways to enhance existing mining, reclamation, mitigation processes and/or procedures. 3. Ide identify data needed to improve environmental evaluation and design of mining projects to protect the environment. Today’s symposium was proposed in the AEE Team Work Plans but coordinated planning for the event began September 15, 1999 when representatives from coal industry, environmental groups and government regulators met in Morgantown. The meeting participants worked with a facilitator from the Canaan Valley Institute to outline plans for the symposium. Several teams were formed to carry out the plans we outlined in the meeting.

  6. Illinois abandoned mined lands reclamation program: a progress report

    SciTech Connect (OSTI)

    Hickmann, T.J.; Jenkusky, S.M.; Massie, S.

    1985-12-01

    The Illinois Abandoned Mined Lands Reclamation Council (AMLRC), created in 1975, is responsible for the abatement of hazardous and environmental problems associated with pre-law abandoned coal mines throughout the State. The availability of federal funds for reclamation, through passage of the Surface Mining Control and Reclamation Act of 1977 (SMCRA), greatly expanded the program. With funds provided through early cooperative agreements and current annual grants from the federal Office of Surface Mining (OSM), the State has reclaimed, or is currently reclaiming, 182 mine sites and has assisted OSM in the abatement of 67 emergency situations. This paper reviews the progress made by the AMLRC in dealing with the State's abandoned mine problems. Specifically, the numbers and types of problem sites reclaimed annually, their costs, and reclamation methods are identified. Progress of the program relative to the entire State's abandoned mine problems is reviewed. The effects of other reclamation factors, such as natural revegetation, remaining privately-funded reclamation, and secondary carbon recovery, on the overall scope of the State's program are also examined. General comments are made concerning grant preparation, State-OSM cooperation and AML-Inventory control. Selected reclamation projects and techniques are also discussed. 11 references, 3 tables.

  7. Surface and groundwater management in surface mined-land reclamation

    SciTech Connect (OSTI)

    Evoy, B.; Holland, M.

    1990-06-01

    This report provides information on surface water and groundwater management for use in the mined-land reclamation planning process in California. Mined-land reclamation, as defined by the California Surface Mining and Reclamation Act, is the combination of land treatments which prevent or minimize water degradation, air pollution, damage to aquatic or wildlife habitat, and erosion resulting from a surface mining operation. Surface water and groundwater management play an integral role in nearly every reclamation plan. Groundwater and surface water runoff (both onto and off of the site) must often be evaluated (1) to design flooding and erosion protection measures such as drainage channels, levees, culverts, or riprap; (2) to prepare and carry out a successful revegetation program; (3) to design stable final slopes; (4) to maximize potential available water for the operation and reclamation stages; (5) to prevent the discharge of contaminants from mine processes or from mined areas; and (6) to limit long-term leachate formation and movement from tailings, pit, or waste rock disposal areas. This report is a guide for mine operators, local government, planners, and plan reviewers.

  8. Stability analysis of a backfilled room-and-pillar mine

    SciTech Connect (OSTI)

    Tesarik, D.R.; Seymour, J.B.; Yanske, T.R.; McKibbin, R.W.

    1995-12-31

    Displacement and stress changes in cemented backfill and ore pillars at the Buick Mine, near Boss, MO, were monitored by engineers from the US Bureau of Mines and The Doe Run Co., St. Louis, MO. A test area in this room-and-pillar mine was backfilled to provide support when remnant ore pillars were mined. Objectives of this research were to evaluate the effect of backfill on mine stability, observe backfill conditions during pillar removal, and calibrate a numerical model to be used to design other areas of the mine. Relative vertical displacements in the backfill were measured with embedment strain gauges and vertical extensometers. Other types of instruments used were earth pressure cells (to identify loading trends in the backfill), borehole extensometers (to measure relative displacement changes in the mine roof and support pillars), and biaxial stressmeters (to measure stress changes in several support pillars and abutments). Two- and three-dimensional numeric codes were used to model the study area. With information from these codes and the installed instruments, two failed pillars were identified and rock mass properties were estimated.

  9. Mining Machine Control Signal Processing System

    SciTech Connect (OSTI)

    Fecitt, G.J.

    1984-01-31

    A signal processing system for an underground mining machine having a steerable mineral cutter and a sensor which senses natural radiation emitted from rock strata overlaying the radiation absorbing mineral and which derives a sensor signal representative of the cutting horizon of the cutter, comprises processing means for receiving and processing the sensor signal to derive an operational signal indicative of the cutter horizon of the cutter, calibration means for accepting a fed in calibration signal representative of a known existing condition of the cutting horizon and comparator means for comparing the derived operational signal with the calibration signal to determine an error in the derived operational signal and for instructing the processing means to apply a suitable correction to the derived operational signal.

  10. GASFLOW comparisons with bureau of mines experiments

    SciTech Connect (OSTI)

    Mueller, C.; Travis, J.R.

    1994-09-01

    At the request of the Department of Energy and Westinghouse Hanford Company, the Bureau of Mines has investigated the flammability of mixtures of hydrogen, ammonia, nitrous oxide, and air. The tests were performed in a spherical chamber under quiescent and turbulent conditions. This paper describes combustion calculations using the GASFLOW code and compares the calculated pressure ratios with experiments mentioned above. GASFLOW is a finite-volume computer code that solves the transient, three-dimensional, compressible fluid, Navier-Stokes equations with multiple species coupled with finite-rate chemical kinetics. The computational results show good agreement with the experimental data and confirm GASFLOW to be a valuable tool for evaluating the above combustion process.

  11. Exploration and mining geology. Second edition

    SciTech Connect (OSTI)

    Peters, W.C.

    1987-01-01

    Using the concepts and practices of applied geology as its central theme, here is a balanced and comprehensive treatment of the geological, geochemical, geophysical, and economic elements of exploration and mining. The author offers an overview of the methods and aims in mineral exploration and production and gives coverage of the geologic principles of ore deposits and the geomorphic environment. The text deals with ''hard'' minerals and the nonfluid sources of materials and energy in the continental masses and in ocean basins. This edition has been expanded to include recent advances in applications of satellite imagery, lithogeochemical surveys, isotope geochemistry, and other developments in the field. It also covers current uses of computers in mineral exploration programs and features case histories, a current references section, and financial data.

  12. Parallel object-oriented data mining system

    DOE Patents [OSTI]

    Kamath, Chandrika; Cantu-Paz, Erick

    2004-01-06

    A data mining system uncovers patterns, associations, anomalies and other statistically significant structures in data. Data files are read and displayed. Objects in the data files are identified. Relevant features for the objects are extracted. Patterns among the objects are recognized based upon the features. Data from the Faint Images of the Radio Sky at Twenty Centimeters (FIRST) sky survey was used to search for bent doubles. This test was conducted on data from the Very Large Array in New Mexico which seeks to locate a special type of quasar (radio-emitting stellar object) called bent doubles. The FIRST survey has generated more than 32,000 images of the sky to date. Each image is 7.1 megabytes, yielding more than 100 gigabytes of image data in the entire data set.

  13. Restoration of abandoned mine lands through cooperative coal resource evaluations

    SciTech Connect (OSTI)

    Hoskins, D.M.; Smith, M.

    1996-12-31

    The public reclamation cost of reclaiming all of Pennsylvania`s abandoned mine lands is estimated at $15 billion. Drainage from abandoned mines poses another $5 billion water pollution clean-up problem. Although it is unlikely that public reclamation alone could ever tackle these problems, much can be done to alleviate the nuisances through the remining of previously mined areas to recover remaining reserves, restore the land and improve water quality in the same process. Remining of priority areas is encouraged through a new Pennsylvania policy which provides incentives to mining companies. One incentive, initiated under Pennsylvania`s comprehensive mine reclamation strategy, is to identify and geologically map reminable coal resources in selected watersheds, and then to expedite mine permitting in these watersheds. At present, two such priority watersheds, Little Toby Creek in Elk County and Tangascootak Creek in Clinton County, are the focus of geologic map compilation based on recent quadrangle mapping, or new, directed, geologic mapping, including new research core drilling to establish the geologic stratigraphic framework. In order to maximize environmental benefits the comprehensive mine reclamation strategy identifies watersheds which are affected by acid mine drainage (AMD), but that are reasonably capable of restoration, if sufficient coal reserves remain. Pennsylvania`s geochemical quality database of rock overburden, in combination with detailed coal resource mapping by the Pennsylvania Geological Survey, and the cooperation of coal companies and leaseholders, is being used by the Department of Environmental Protection (DEP) to identify and design remining projects which will not only allow the recovery of coal resources, but will also improve the water quality through a variety of innovative mining techniques.

  14. Capture and Use of Coal Mine Ventilation Air Methane

    SciTech Connect (OSTI)

    Deborah Kosmack

    2008-10-31

    CONSOL Energy Inc., in conjunction with MEGTEC Systems, Inc., and the U.S. Department of Energy with the U.S. Environmental Protection Agency, designed, built, and operated a commercial-size thermal flow reversal reactor (TFRR) to evaluate its suitability to oxidize coal mine ventilation air methane (VAM). Coal mining, and particularly coal mine ventilation air, is a major source of anthropogenic methane emissions, a greenhouse gas. Ventilation air volumes are large and the concentration of methane in the ventilation air is low; thus making it difficult to use or abate these emissions. This test program was conducted with simulated coal mine VAM in advance of deploying the technology on active coal mine ventilation fans. The demonstration project team installed and operated a 30,000 cfm MEGTEC VOCSIDIZER oxidation system on an inactive coal mine in West Liberty, WV. The performance of the unit was monitored and evaluated during months of unmanned operation at mostly constant conditions. The operating and maintenance history and how it impacts the implementation of the technology on mine fans were investigated. Emission tests showed very low levels of all criteria pollutants at the stack. Parametric studies showed that the equipment can successfully operate at the design specification limits. The results verified the ability of the TFRR to oxidize {ge}95% of the low and variable concentration of methane in the ventilation air. This technology provides new opportunities to reduce greenhouse gas emissions by the reduction of methane emissions from coal mine ventilation air. A large commercial-size installation (180,000 cfm) on a single typical mine ventilation bleeder fan would reduce methane emissions by 11,000 to 22,100 short tons per year (the equivalent of 183,000 to 366,000 metric tonnes carbon dioxide).

  15. 87th regular meeting of the Rocky Mountain Coal Mining Institute: Proceedings

    SciTech Connect (OSTI)

    Finnie, D.G.

    1991-01-01

    Eleven papers are included in these proceedings. Topics include management of coal mining operations, improving mine health and safety, new technologies for longwall mining, coal haulage, coal drying, a demonstration of the LFC process, and state of the art in mining automation. All eleven papers have been processed for inclusion on the data base.

  16. Mine seismicity and the Comprehensive Nuclear Test Ban Treaty

    SciTech Connect (OSTI)

    Chiappetta, F.; Heuze, F.; Walter, W.; Hopler, R.; Hsu, V.; Martin, B.; Pearson, C.; Stump, B.; Zipf, K.

    1998-12-09

    Surface and underground mining operations generate seismic ground motions which are created by chemical explosions and ground failures. It may come as a surprise to some that the ground failures (coal bumps, first caves, pillar collapses, rockbursts, etc.) can send signals whose magnitudes are as strong or stronger than those from any mining blast. A verification system that includes seismic, infrasound, hydroacoustic and radionuclide sensors is being completed as part of the CTBT. The largest mine blasts and ground failures will be detected by this system and must be identified as distinct from signals generated by small nuclear explosions. Seismologists will analyze the seismic records and presumably should be able to separate them into earthquake-like and non earthquake-like categories, using a variety of so-called seismic discriminants. Non-earthquake essentially means explosion- or implosion-like. Such signals can be generated not only by mine blasts but also by a variety of ground failures. Because it is known that single-fired chemical explosions and nuclear explosion signals of the same yield give very similar seismic records, the non-earthquake signals will be of concern to the Treaty verification community. The magnitude of the mine-related events is in the range of seismicity created by smaller nuclear explosions or decoupled tests, which are of particular concern under the Treaty. It is conceivable that legitimate mining blasts or some mine-induced ground failures could occasionally be questioned. Information such as shot time, location and design parameters may be all that is necessary to resolve the event identity. In rare instances where the legitimate origin of the event could not be resolved by a consultation and clarification procedure, it might trigger on On-Site Inspection (OSI). Because there is uncertainty in the precise location of seismic event as determined by the International Monitoring System (IMS), the OSI can cover an area of up to 1

  17. Water spray ventilator system for continuous mining machines

    DOE Patents [OSTI]

    Page, Steven J.; Mal, Thomas

    1995-01-01

    The invention relates to a water spray ventilator system mounted on a continuous mining machine to streamline airflow and provide effective face ventilation of both respirable dust and methane in underground coal mines. This system has two side spray nozzles mounted one on each side of the mining machine and six spray nozzles disposed on a manifold mounted to the underside of the machine boom. The six spray nozzles are angularly and laterally oriented on the manifold so as to provide non-overlapping spray patterns along the length of the cutter drum.

  18. Environmental regulation of coal mining, SMCRA`s second decade

    SciTech Connect (OSTI)

    McElfish, J.M.; Beier, A.E.

    1990-12-31

    This controversial book examines environmental regulation of coal mining in the United States over the 1979-1989 period. The Surface Mining Control and Reclamation Act of 1977 (SMCRA) established federal regulation of the environmental effects of coal mining. The permanent regulatory program implementing SMCRA was initiated in 1979. This book looks at the first ten years of SMCRA, seeking to draw lessons from experience that will improve regulation, so that the objectives of the law may be achieved in SMCRA`s second decade.

  19. Wyoming coal mining. A wage and employment survey, 1982

    SciTech Connect (OSTI)

    Not Available

    1982-04-01

    The Wyoming Department of Labor and Statistics initiated a wage and employment survey of the State's coal mining industry during the first quarter of 1982. The survey was designed to update the statistics obtained in the 1979 survey of Wyoming's coal mines. Specifically, data were collected to: (1) estimate the number of workers in selected occupational categories; (2) determine the average straight-time hourly wage in each occupational category; (3) determine the number of workers covered by a collective bargaining agreement in each occupational category; (4) review the employer contributions to employee fringe benefit programs; (5) establish bench mark data for Wyoming's underground coal mines.

  20. Active mines in Arizona and Arizona exploration offices

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    This book is a directory that lists 91 mining operations and 107 sand and gravel operations. It lists the company name, address, key personnel, mine, mill, or smelter location, and a description of the operation. A map plotting the locations of all the active mines is also available ($2). Arizona Exploration Offices is a directory that lists 68 exploration companies in Arizona, 80% of whom list gold or silver as their principal exploration target. Other exploration companies are searching for industrial minerals, uranium, beryllium, rare earths, ferroalloys, and sulfur.

  1. 14. International conference on ground control in mining: Proceedings

    SciTech Connect (OSTI)

    Peng, S.S.

    1995-11-01

    This volume contains the 38 papers presented at the conference. Papers have been divided into the following sections: Innovative longwall tailgate support; Effects of high horizontal stresses; Pillar recovery; Pillar design; Prop support; Roof and rib bolting; Floor stability; Surface subsidence; Longwall operations; Longwall entry stability; and Multiple seam mine design. Except for two papers, one on iron ore mining and the second on the Waste Isolation Pilot Plant, all papers deal with underground coal mining. Thirty-seven papers have been processed separately for inclusion on the data base.

  2. Psycho-social aspects of productivity in underground coal mining

    SciTech Connect (OSTI)

    Akin, G.

    1981-10-01

    The psychosocial aspects of productivity in underground coal mining were investigated. The following topics were studied: (1) labor productivity in deep mines and the explanations for productivity changes; (2) current concepts and research on psychosocial factors in productivity; (3) a survey of experiments in productivity improvement (4) the impact of the introduction of new technology on the social system and the way that it accomplishes production (5) a clinical study of a coal mining operation, model described how production is actually accomplished by workers at the coal face; and (6) implications and recommendations for new technology design, implementation and ongoing management.

  3. Acid mine drainage: Common law, SMCRA, and the Clean Water Act

    SciTech Connect (OSTI)

    Henrich, C.

    1995-12-31

    Acid mine drainage is a major problem related to coal mining which, if unabated, can severely damage the aquatic environment. Damage resulting from acid mine drainage was first addressed by common law and riparian principles. As societal laws changed, common law principles alone could not effectively control this problem. Preventing and controlling pollution including acid mine drainage are important goals of the Surface Mining Control Reclamation Act (SMCRA) and the Clean Water Act (CWA). This article examines how common law, SMCRA, and the CWA address the acid mine drainage issue independently, and how improvements in the control of acid mine drainage can be achieved.

  4. Superfund Record of Decision (EPA Region 7): Des Moines TCE Site, Operable Unit 3, Des Moines, IA. (Second remedial action), September 1992. Final report

    SciTech Connect (OSTI)

    Not Available

    1992-09-18

    The Des Moines TCE site is located southwest of downtown Des Moines, Polk County, Iowa. Land use in the area is predominantly industrial and commercial, and part of the site lies within the floodplain of the Raccoon River. Water from the Des Moines Water Works north infiltration gallery was found to be contaminated with trichloroethylene (TCE), dichloroethylene (DCE), and vinyl chloride at levels above accepted drinking water standards. The ROD addresses OU3, which encompasses potential sources of ground water contamination in an area north of the Raccoon River. The selected remedial action for OU3 includes no action with periodic groundwater monitoring.

  5. New Mexico Department of Fish and Game Mining Guidelines webpage...

    Open Energy Info (EERE)

    New Mexico Department of Fish and Game Mining Guidelines webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: New Mexico Department of Fish and Game...

  6. Abandoned Mine Reclamation Fund - a view from the West

    SciTech Connect (OSTI)

    Collins, J.D.

    1985-01-01

    Congress created the Abandoned Mine Reclamation Fund (AML) in 1977 as part of the Surface Mining Control and Reclamation Act. The AML is funded by a special tax on coal mining. About one-third of AML fees will be paid by coal operators in the western states. The author examines the disbursement of AML funds under the Reagan Administration. He describes how the western state governments expected a generous portion of the AML funds for coal and non-coal reclamation, as well as community impact assistance projects in their states. Finally, the author shows how the Office of Surface Mining has largely frustrated the western expectations through its interpretation of the AML disbursement priorities.

  7. Salinity gradient solar pond technology applied to potash solution mining

    SciTech Connect (OSTI)

    Martell, J.A.; Aimone-Martin, C.T.

    2000-06-12

    A solution mining facility at the Eddy Potash Mine, Eddy County, New Mexico has been proposed that will utilize salinity gradient solar pond (SGSP) technology to supply industrial process thermal energy. The process will include underground dissolution of potassium chloride (KCl) from pillars and other reserves remaining after completion of primary room and pillar mining using recirculating solutions heated in the SGSP. Production of KCl will involve cold crystallization followed by a cooling pond stage, with the spent brine being recirculated in a closed loop back to the SGSP for reheating. This research uses SGSP as a renewable, clean energy source to optimize the entire mining process, minimize environmental wastes, provide a safe, more economical extraction process and reduce the need for conventional processing by crushing, grinding and flotation. The applications of SGSP technology will not only save energy in the extraction and beneficiation processes, but also will produce excess energy available for power generation, desalination, and auxiliary structure heating.

  8. LM Progressing with Uranium Mines Report to Congress

    Broader source: Energy.gov [DOE]

    As reported in an earlier Program Update newsletter, the U.S. Department of Energy (DOE) Office of Legacy Management (LM) is compiling data for a Report to Congress on defense-related uranium mines...

  9. Alteration And Geochemical Zoning In Bodie Bluff, Bodie Mining...

    Open Energy Info (EERE)

    Banded, epithermal quartz-adularia veins have produced about 1.5 million ounces of gold and 7 million ounces of silver from the Bodie mining district, eastern California. The...

  10. Colorado School of Mines: Spring 2016 Career Day | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Day Colorado School of Mines: Spring 2016 Career Day February 9, 2016 11:00AM to 5:00PM EST 1500 Illinois Street, Golden, CO 80401 Website Link Contact Kimberly Chappell andor...

  11. Human Resources at Colorado School of Mines | Critical Materials...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Employment at Colorado School of Mines Office of Human Resources: 1500 Illinois St., Suite ... Assistant Director (303)-273-3056 Link to Office of Human Resources Link to Job Openings

  12. Surface coal mining in Alaska: an investigation of the Surface Mining Control and Reclamation Act of 1977 in relation to Alaskan conditions. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    This report was written in response to a mandate in section 708 of the Surface Mining Control and Reclamation Act of 1977 which required the study of surface coal mining conditions in the State of Alaska, in order to determine which, if any, of the provisions of the Act should be modified with respect to surface coal mining operations in Alaska. The report discusses both surface mining and the surface effects of underground mining. The report examines not only the impact of mining at the site of operations but also the effects that extend beyond the mine itself, including effects on social institutions, the economy, the physical well-being of people, and the use of land. The report considers Alaska conditions primarily from the perspective of a potential increase in coal development, not of mining limited to meeting local needs of energy.

  13. Proceedings of the 15. annual national meeting of the American Society for Surface Mining and Reclamation. Mining -- Gateway to the future

    SciTech Connect (OSTI)

    Throgmorton, D.; Nawrot, J.; Mead, J.; Galetovic, J.; Joseph, W.

    1998-12-31

    The 124 papers of these proceedings are arranged under the following topical sections: Minerals education; Hydrology--Characterization and monitoring; Tailings--Reclamation; Reforestation; Mine drainage--Biogeochemical processes; Mine drainage--Treatment, general; Mine drainage--Passive treatment, wetlands; Mine drainage--Prediction and monitoring; Acid soils--Reclamation practices; Wildlife and fisheries habitat; Subsidence--Engineering practices and environmental effects; OSM acid forming materials mini workshops; RUSLE--Erosion prediction techniques on mined construction and reclaimed lands; IDNR wetlands technology transfer program; Mine planning and postmining land use; Vegetation establishment--Principles and practices; Vegetation establishment--Warm season grasses; Coal combustion by-products--General; Coal combustion by-products--Mine drainage treatment; and Prime farmland reclamation and mine soils management. Papers within scope have been processed separately for inclusion on the data base.

  14. Collaboration and Communication: DOE and Navajo Nation Tour Uranium Mine

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reclamation Sites to Share Expertise and Experiences | Department of Energy Collaboration and Communication: DOE and Navajo Nation Tour Uranium Mine Reclamation Sites to Share Expertise and Experiences Collaboration and Communication: DOE and Navajo Nation Tour Uranium Mine Reclamation Sites to Share Expertise and Experiences July 10, 2014 - 4:05pm Addthis What does this project do? Goal 4. Optimize the use of land and assets. In February 2014, U.S. Department of Energy (DOE) Office of

  15. Effective Conveyer Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    David LaRose

    2006-11-14

    This document details progress on the project ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from May 15, 2006 to November 14, 2006. Progress during this period includes significant advances in development of a Smart Camera based prototype system for on-site mechanical splice detection, and continued deployment of both the mechanical splice detection system and the vulcanized splice detection system in area coal mines.

  16. Mercury Speciation in Piscivorous Fish from Mining-impacted Reservoirs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mercury Speciation in Piscivorous Fish from Mining-impacted Reservoirs Mercury toxicity generates environmental concerns in diverse aquatic systems because methylmercury enters the water column in diverse ways then biomagnifies through food webs. At the apex of many freshwater food webs, piscivorous fish can then extend that trophic transfer and potential for neurotoxicity to wildlife and humans. Mining activities, particularly those associated with the San Francisco Bay region, can generate

  17. Environmental regulation of coal mining. SMCRA`s Second Decade

    SciTech Connect (OSTI)

    McElfish, J.M.; Beier, A.E.

    1990-12-31

    If you find yourself involved in the workings of the Surface Mining Control and Reclamation Act of 1977 (SMCRA), let ELI`s guide take you through SMCRA`s second decade. Environmental Regulation of Coal mining: SMCRA`s Second Decade gives you a clear picture of SMCRA`s statutory and regulatory requirements, and identifies the key policy disputes and problems that will be confronted in the years ahead.

  18. Energy Department Announces Five Research Projects to Improve Mining

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency | Department of Energy Research Projects to Improve Mining Efficiency Energy Department Announces Five Research Projects to Improve Mining Efficiency May 5, 2005 - 12:42pm Addthis WASHINGTON, DC - As part of the Bush Administration's continuing effort to make more efficient use of America's domestic energy resources while maintaining sound stewardship of the environment, the U.S. Department of Energy (DOE) today announced the selection of five new research and development

  19. In a mining accident, first responders are working against

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a mining accident, first responders are working against the clock and against a myriad of dangers such as debris, poisonous gases, flooding, explosive vapors, and unstable structures to assess the situation and rescue trapped miners. These unknown and potentially deadly conditions create a challenge for first responders and often limit their ability to assess the situation and respond in a timely matter. There is a need for a robotic system that could be used to support a mine rescue team,

  20. Truckee Meadows Community College and Colorado School of Mines Win

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Geothermal Student Competitions | Department of Energy Truckee Meadows Community College and Colorado School of Mines Win Geothermal Student Competitions Truckee Meadows Community College and Colorado School of Mines Win Geothermal Student Competitions October 9, 2014 - 9:09am Addthis The Energy Department announced the 2014 winners of the National Geothermal Student Competition and the Geothermal Case Study Challenge last week at an industry gathering in Portland, Oregon. These competitions

  1. Dr. George Ansell, President Colorado School of Mines Research Institute

    Office of Legacy Management (LM)

    Dr. George Ansell, President Colorado School of Mines Research Institute Golden, Colorado 80403 Dear Dr. Ansell: As you may know, the Department of Energy (DOE) is evaluating the radiological condition of sites that were utilized under the Manhattan Engineer District (MED) and the Atomic Energy Comnission (AEC) during the early years of nuclear development to determine whether they need remedial action. Mr. J. Krause of the Colorado School of Mines Research Institute was notified by letter (Mott

  2. Colorado School of Mines Researchers Win Patent | Critical Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute News News releases CMI in the news News archive CMI social media Colorado School of Mines Researchers Win Patent The Coloroado School of Mines 2013 highlights include news that Prof. Corby Anderson along with co-inventors Dr. Paul Miranda of Thompson Creek minerals and Dr. Ed Rosenberg of University of Montana were granted a US patent for styrene based ion exchange resins with oxine functionalized groups. The original work was focused on separating iron and gallium, but the

  3. Teleoperated control system for underground room and pillar mining

    DOE Patents [OSTI]

    Mayercheck, William D. (New Stanton, PA); Kwitowski, August J. (Clairton, PA); Brautigam, Albert L. (Pittsburgh, PA); Mueller, Brian K. (Pittsburgh, PA)

    1992-01-01

    A teleoperated mining system is provided for remotely controlling the various machines involved with thin seam mining. A thin seam continuous miner located at a mining face includes a camera mounted thereon and a slave computer for controlling the miner and the camera. A plurality of sensors for relaying information about the miner and the face to the slave computer. A slave computer controlled ventilation sub-system which removes combustible material from the mining face. A haulage sub-system removes material mined by the continuous miner from the mining face to a collection site and is also controlled by the slave computer. A base station, which controls the supply of power and water to the continuous miner, haulage system, and ventilation systems, includes cable/hose handling module for winding or unwinding cables/hoses connected to the miner, an operator control module, and a hydraulic power and air compressor module for supplying air to the miner. An operator controlled host computer housed in the operator control module is connected to the slave computer via a two wire communications line.

  4. Reactivation of landslides by surface subsidence from longwall mining

    SciTech Connect (OSTI)

    Iannacchione, A.T.; Ackman, T.E.

    1984-12-01

    Subsidence research by the US Bureau of Mines has identified and documented the occurrence of landslides over a longwall mining area in the Dunkard basin. Mining by longwall methods has been observed or produce a gradual surface subsidence profile of up to 60% of the thickness of the mined coal bed. The gradual subsidence of panels averaging 600 x 5000 ft (180 x 1525 m) can cause reactivation of older landslide deposits by decreasing the support to the landslide toe area. Examination of surficial features over a longwall mining area comprised of nine panels has led to the identification of several reactivated landslides. The two largest landslides occurred above a thin sandstone member with several associated springs. The largest landslides ranged from 100 to 300 ft (30 to 90 m) in length and from 100 to 200 ft (30 to 60 m) in width. Maximum scarp-slope displacements were approximately 7 ft (2 m). Less significant mass wasting was also observed over the longwall panels. Identification of landslides was accomplished through examination of premining aerial photographs and geologic field investigation. Characterization of reactivated zones was achieved through evaluation of current aerial 2-ft (0.6-m) surface contour map and field surveys. Recognition of problem areas will make civic and mining personnel aware of the landslide potential so that damage in such areas can be minimized.

  5. Effects of surface mining on aquatic resources in North America

    SciTech Connect (OSTI)

    Starnes, L.B.; Gasper, D.C.

    1995-05-01

    Surface mining is highly visible land use because it temporarily eliminates surface vegetation and can permanently change topography as with mountain-top removal and valley fill operations. It also permanently and drastically alters soil and subsurface geologic structure and disrupts surface and subsurface hydrologic regimes. The American Fisheries Society (AFS) encourages energy conservation, use of renewable resources, and recycling to minimize the need for non-renewable minerals and fuels that are obtained through mining processes. When mining occurs, it is AFS policy to encourage legislation and diligent regulation of all surface mining by local, state, province, and federal government to provide adequate protection for aquatic resources. Federal legislation provides uniformity of standards nationwide. While the Surface Mining Control and Reclamation Act has attempted to minimize environmental impacts from coal mining, similar legislation and enforcement should be encourages for other minerals. The Society encourages its members to become involved in this process by providing technical information essential for protection and continued propagation of fishery resources to policy makers so decisions are made on a scientific, rather than emotional or political basis.

  6. Small surface coal mine operators handbook. Final report

    SciTech Connect (OSTI)

    Tourbier, J.T.; Westmacott, R.

    1980-06-01

    The purpose of this handbook is to interpret the Regulations of the Surface Mining Control and Reclamation Act of 1977 (Public Law 95-87) (hereafter referred to as the Act) as they affect the operators of small surface coal mines. Further, the purpose of this handbook is to make it easier for the small operator to compare his operation with the act in order to determine compliance with the regulations. Part 795 of the Regulations deals specifically with the Small Operator Assistance Program. This program relieves the operator of the cost of carrying out certain hydrologic and geologic analyses required by the Regulations. The emphasis of this handbook is on the protection of water resources during mining and reclamation operations. As almost all the operations in surface mining directly or indirectly affect water the authors have included some operations which may only marginally affect water quality or hydrology. Anthracite mining, lignite mining, coal processing, refuse disposal, and slurry disposal are not covered in this handbook.

  7. Development of a Mine Rescue Drilling System (MRDS) :

    SciTech Connect (OSTI)

    Raymond, David W.; Gaither, Katherine N.; Polsky, Yarom; Knudsen, Steven D.; Broome, Scott Thomas; Su, Jiann-Cherng; Blankenship, Douglas A.; Costin, Laurence S.

    2014-06-01

    Sandia National Laboratories (Sandia) has a long history in developing compact, mobile, very high-speed drilling systems and this technology could be applied to increasing the rate at which boreholes are drilled during a mine accident response. The present study reviews current technical approaches, primarily based on technology developed under other programs, analyzes mine rescue specific requirements to develop a conceptual mine rescue drilling approach, and finally, proposes development of a phased mine rescue drilling system (MRDS) that accomplishes (1) development of rapid drilling MRDS equipment; (2) structuring improved web communication through the Mine Safety & Health Administration (MSHA) web site; (3) development of an improved protocol for employment of existing drilling technology in emergencies; (4) deployment of advanced technologies to complement mine rescue drilling operations during emergency events; and (5) preliminary discussion of potential future technology development of specialized MRDS equipment. This phased approach allows for rapid fielding of a basic system for improved rescue drilling, with the ability to improve the system over time at a reasonable cost.

  8. Active Interrogation Observables for Enrichment Determination of DU Shielded HEU Metal Assemblies with Limited Geometrical Information

    SciTech Connect (OSTI)

    Pena, Kirsten E; McConchie, Seth M; Crye, Jason Michael; Mihalczo, John T

    2011-01-01

    Determining the enrichment of highly enriched uranium (HEU) metal assemblies shielded by depleted uranium (DU) proves a unique challenge to currently employed measurement techniques. Efforts to match time-correlated neutron distributions obtained through active interrogation to Monte Carlo simulations of the assemblies have shown promising results, given that the exact geometries of both the HEU metal assemblies and DU shields are known from imaging and fission site mapping. In certain situations, however, it is desirable to obtain enrichment with limited or no geometrical information of the assemblies being measured. This paper explores the possibility that the utilization of observables in the interrogation of assemblies by time-tagged D-T neutrons, including time-correlated distribution of neutrons and gammas using liquid scintillators operating on the fission chain time scale, can lead to enrichment determination without a complete set of geometrical information.

  9. NREL Science Central to Success of New Biofuels Projects: DuPont-NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Partnership Delivered Key Innovations for Large Scale Cellulosic Ethanol Facility in Iowa - News Feature | NREL NREL Science Central to Success of New Biofuels Projects: DuPont-NREL Partnership Delivered Key Innovations for Large Scale Cellulosic Ethanol Facility in Iowa February 23, 2015 This photo shows two men in front of a bin the size of a golf cart. Both men are reaching into the bin to touch the biomass inside. NREL Biochemical Conversion Manager Rick Elander toured NREL's Biorefinery

  10. DuPont’s Cellulosic Ethanol Grand Opening Marks a Milestone for the Advanced Biofuels Industry

    Office of Energy Efficiency and Renewable Energy (EERE)

    On a bright, crisp October morning in Iowa, I had the privilege to speak at the grand opening of DuPont’s cellulosic ethanol biorefinery—the fourth biorefinery of its kind in the United States and the largest in the world. This impressive plant is equipped to produce 30 million gallons of ethanol each year from the leftover stalks and leaves of the corn plant, called corn stover.

  11. Fond du Lac Band Leads Climate Resilience Efforts on Lake Superior Chippewa Indian Reservation

    Office of Energy Efficiency and Renewable Energy (EERE)

    From the White House Council on Environmental Quality blog: Last Friday I had the pleasure of visiting the Fond du Lac Band of Lake Superior Chippewa Indian Reservation. We toured the reservation and facilities with tribal Chairwoman Karen Diver, a member of the President’s State, Local, and Tribal Leaders Task Force on Climate Preparedness and Resilience, and the Tribe’s Resource Management Division.

  12. Hydraulically operated mine prop with safety valve

    SciTech Connect (OSTI)

    Koppers, M.; Marr, P.

    1981-02-24

    A mine prop is disclosed that is provided with an overpressure valve of large flowthrough section which opens when excessive forces suddenly act on the prop to discharge pressure fluid from the interior of the prop. The overpressure valve comprises a hollow cylindrical housing forming at one end a valve seat communicating with the fluid-filled inner space of the prop and a valve member axially guided in the housing for movement between a closed position engaging the valve seat and an open position. The fluid-filled space of the prop communicates with channels leading to the outside of the prop. The valve member is normally maintained in the closed position by a gas pillow under high pretension confined in a pressure space delimited peripherally by the wall of the valve housing and at opposite ends respectively by the valve member and a plug fluid tightly mounted in and closing the other end of the housing. The valve member and the plug are both formed from metal and are both provided at facing ends with annular slender sealing lips of triangular cross-section tapering toward each other, the outer surfaces of which are pressed into engagement with the inner peripheral surface of the housing by the pressure of the gas pillow.

  13. Economical Recovery of By-products in the Mining Industry

    SciTech Connect (OSTI)

    Berry, J.B.

    2001-12-05

    The U.S. Department of Energy (DOE) Office of Industrial Technologies, Mining Industry of the Future Program, works with the mining industry to further the industry's advances toward environmental and economic goals. Two of these goals are (1) responsible emission and by-product management and (2) low-cost and efficient production (DOE 1998). DOE formed an alliance with the National Mining Association (NMA) to strengthen the basis for research projects conducted to benefit the mining industry. NMA and industry representatives actively participate in this alliance by evaluating project proposals and by recommending research project selection to DOE. Similarly, the National Research Council (NRC) has recently and independently recommended research and technology development opportunities in the mining industry (NRC 2001). The Oak Ridge National Laboratory (ORNL) and Colorado School of Mines engineers conducted one such project for DOE regarding by -product recovery from mining process residue. The results of this project include this report on mining industry process residue and waste with opportunity for by-product recovery. The U.S. mineral processing industry produces over 30,000,000 metric tons per year of process residue and waste that may contain hazardous species as well as valuable by-products. This study evaluates the copper, lead, and zinc commodity sectors which generate between 23,300,000 and 24,000,000 metric tons per year. The distribution of residual elements in process residues and wastes varies over wide ranges* because of variations in the original ore content as it is extracted from the earth's crust. In the earth's crust, the elements of interest to mining fall into two general geochemical classifications, lithophiles and chalcophiles** (Cox 1997). Groups of elements are almost always present together in a given geochemical classification, but the relative amounts of each element are unique to a particular ore body. This paper generally describes

  14. Prompt Neutron Time Decay in Single HEU and DU Metal Annular Storage Castings

    SciTech Connect (OSTI)

    Pena, Kirsten E [ORNL] [ORNL; McConchie, Seth M [ORNL] [ORNL; Mihalczo, John T [ORNL] [ORNL

    2010-01-01

    Previous measurements of highly enriched uranium (HEU) storage castings performed by Oak Ridge National Laboratory (ORNL) at the Y-12 National Security Complex showed a prompt neutron time decay that is not exponential. These measurements showed that multiple time constants originating from multiplication, time-of-flight, scattering in the assembly and room return could be associated with this prompt neutron decay. In this work, the contribution not associated with neutron multiplication was investigated via measurements with a depleted uranium (DU) casting. The measurements at ORNL used an annular (5.0-in OD, 3.5-in ID, 6.0-in H) DU casting with a time-tagged 252Cf source, centered vertically on the axis, and four closely coupled 1 1 6-in.-long plastic scintillators with -in.- thick lead shielding adjacent to the outer surface of the casting. This setup was identical to the configuration used in the previously performed measurements with HEU castings at Y-12. The time correlation between fission events and detections in the plastic scintillators was measured, as well as the time distribution of coincidences between multiple detectors within a 512-ns time window. The measurement results were then compared to MCNP-PoliMi calculations and the previous HEU measurements. Time constants from decay fits to the HEU and DU data were compared to characterize the contributions resulting from multiplication, time-of-flight, and scattering.

  15. The Kelastic variable wall mining machine. Interim final report

    SciTech Connect (OSTI)

    1995-11-12

    This machine cuts coal along a longwall face extending up to 500 feet by a rotating auger with bits. The machine also transports the coal that is cut acting as screw conveyor. By virtue of an integral shroud comprising part of the conveyor the machine is also amenable to a separation of the zones where men work from air being contaminated by dust and methane gas by the cutting action. Beginning as single intake air courses, the air separates at the working section where one split provides fresh air to the Occupied Zone (OZ) for human needs and the other split purges and carries away dust and methane from face fragmentation in the Cutting Zone (CZ). The attractiveness of the Variable Wall Mining Machine is that it addresses the limitations of current longwall mining equipment: it can consistently out-produce continuous mining machines and most longwall shearing machines. It also is amenable to configuring an environment, the dual-duct system, where the air for human breathing is separated from dust-laden ventilating air with methane mixtures. The objective of the research was to perform a mathematical and experimental study of the interrelationships of the components of the system so that a computer model could demonstrate the workings of the system in an animation program. The analysis resulted in the compilation of the parameters for three different configurations of a dual aircourse system of ventilating underground mines. In addressing the goal of an inherently safe mining system the dual-duct adaptation to the Variable Wall Mining Machine appears to offer the path to solution. The respirable dust problem is solvable; the explosive dust problem is nearly solvable; and the explosive methane problem can be greatly reduced. If installed in a highly gassy mine, the dual duct models would also be considerably less costly.

  16. Environmental control technology for mining, milling, and refining thorium

    SciTech Connect (OSTI)

    Weakley, S.A.; Blahnik, D.E.; Young, J.K.; Bloomster, C.H.

    1980-02-01

    The purpose of this report is to evaluate, in terms of cost and effectiveness, the various environmental control technologies that would be used to control the radioactive wastes generated in the mining, milling, and refining of thorium from domestic resources. The technologies, in order to be considered for study, had to reduce the radioactivity in the waste streams to meet Atomic Energy Commission (10 CFR 20) standards for natural thorium's maximum permissible concentration (MPC) in air and water. Further regulatory standards or licensing requirements, either federal, state, or local, were not examined. The availability and cost of producing thorium from domestic resources is addressed in a companion volume. The objectives of this study were: (1) to identify the major waste streams generated during the mining, milling, and refining of reactor-grade thorium oxide from domestic resources; and (2) to determine the cost and levels of control of existing and advanced environmental control technologies for these waste streams. Six potential domestic deposits of thorium oxide, in addition to stockpiled thorium sludges, are discussed in this report. A summary of the location and characteristics of the potential domestic thorium resources and the mining, milling, and refining processes that will be needed to produce reactor-grade thorium oxide is presented in Section 2. The wastes from existing and potential domestic thorium oxide mines, mills, and refineries are identified in Section 3. Section 3 also presents the state-of-the-art technology and the costs associated with controlling the wastes from the mines, mills, and refineries. In Section 4, the available environmental control technologies for mines, mills, and refineries are assessed. Section 5 presents the cost and effectiveness estimates for the various environmental control technologies applicable to the mine, mill, and refinery for each domestic resource.

  17. Field site investigation: Effect of mine seismicity on groundwater hydrology

    SciTech Connect (OSTI)

    Ofoegbu, G.I.; Hsiung, S.; Chowdhury, A.H.; Philip, J.

    1995-04-01

    The results of a field investigation on the groundwater-hydrologic effect of mining-induced earthquakes are presented in this report. The investigation was conducted at the Lucky Friday Mine, a silver-lead-zinc mine in the Coeur d`Alene Mining District of Idaho. The groundwater pressure in sections of three fracture zones beneath the water table was monitored over a 24-mo period. The fracture zones were accessed through a 360-m-long inclined borehole, drilled from the 5,700 level station of the mine. The magnitude, source location, and associated ground motions of mining-induced seismic events were also monitored during the same period, using an existing seismic instrumentation network for the mine, augmented with additional instruments installed specifically for the project by the center for Nuclear Waste Regulatory Analyses (CNWRA). More than 50 seismic events of Richter magnitude 1.0 or larger occurred during the monitoring period. Several of these events caused the groundwater pressure to increase, whereas a few caused it to decrease. Generally, the groundwater pressure increased as the magnitude of seismic event increased; for an event of a given magnitude, the groundwater pressure increased by a smaller amount as the distance of the observation point from the source of the event increased. The data was examined using regression analysis. Based on these results, it is suggested that the effect of earthquakes on groundwater flow may be better understood through mechanistic modeling. The mechanical processes and material behavior that would need to be incorporated in such a model are examined. They include a description of the effect of stress change on the permeability and water storage capacity of a fracture rock mass; transient fluid flow; and the generation and transmission of seismic waves through the rock mass.

  18. OSTIblog Articles in the HomeStake MIne Topic | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information HomeStake MIne Topic Mining for Gold, Neutrinos and the Neutrinoless Double Beta Decay by Kathy Chambers 23 Sep, 2014 in Deep within the caverns of Lead, South Dakota is one of the nation's preeminent underground laboratories. The site of the former Homestake Mine was once one of the largest and deepest gold mines in North America. This famous mine was discovered during the 1876 Black Hills gold rush and maintained a rich and colorful mining

  19. A DES ASIC Suitable for Network Encryption at 10 Gbps and Beyond

    SciTech Connect (OSTI)

    Gass, Karl; Pierson, Lyndon G.; Robertson, Perry J.; Wilcox, D. Craig; Witzke, Edward L.

    1999-04-30

    The Sandia National Laboratories (SNL) Data Encryption Standard (DES) Application Specific Integrated Circuit (ASIC) is the fastest known implementation of the DES algorithm as defined in the Federal Information Processing Standards (FIPS) Publication 46-2. DES is used for protecting data by cryptographic means. The SNL DES ASIC, over 10 times faster than other currently available DES chips, is a high-speed, filly pipelined implementation offering encryption, decryption, unique key input, or algorithm bypassing on each clock cycle. Operating beyond 105 MHz on 64 bit words, this device is capable of data throughputs greater than 6.7 Billion bits per second (tester limited). Simulations predict proper operation up to 9.28 Billion bits per second. In low frequency, low data rate applications, the ASIC consumes less that one milliwatt of power. The device has features for passing control signals synchronized to throughput data. Three SNL DES ASICS may be easily cascaded to provide the much greater security of triple-key, triple-DES.

  20. Mine subsidence in Illinois: facts for the homeowner considering insurance

    SciTech Connect (OSTI)

    DuMontelle, P.B.; Bradford, S.C.; Bauer, R.A.; Killey, M.M.

    1981-08-01

    Subsidence is the sinking of land surface, commonly resulting from underground mining. In Illinois, property damage has been sufficiently severe that a state law was enacted to provide subsidence insurance for homeowners. This publication has been prepared for homeowners in Illinois: (1) to inform them whether they live in subsidence-prone areas, (2) to aid them in understanding some frequently encountered effects of mine subsidence as well as problems sometimes mistaken for mine subsidence, and (3) to suggest further sources of information. Although the new subsidence insurance program for homeowners in mining areas prompted the writing of this report, we do not attempt to explain the details of the insurance program. Our purpose is to explain the causes and the nature of subsidence and discuss ways to minimize damage caused by subsidence. About 750,000 acres of Illinois land have been undermined for coal, and many homeowners are concerned about the effects underground mining may d at nine areas alalitative methods are presented. Chapter Five presents conclusions and suggestions for future research.

  1. Modeling Spatial Dependencies and Semantic Concepts in Data Mining

    SciTech Connect (OSTI)

    Vatsavai, Raju

    2012-01-01

    Data mining is the process of discovering new patterns and relationships in large datasets. However, several studies have shown that general data mining techniques often fail to extract meaningful patterns and relationships from the spatial data owing to the violation of fundamental geospatial principles. In this tutorial, we introduce basic principles behind explicit modeling of spatial and semantic concepts in data mining. In particular, we focus on modeling these concepts in the widely used classification, clustering, and prediction algorithms. Classification is the process of learning a structure or model (from user given inputs) and applying the known model to the new data. Clustering is the process of discovering groups and structures in the data that are ``similar,'' without applying any known structures in the data. Prediction is the process of finding a function that models (explains) the data with least error. One common assumption among all these methods is that the data is independent and identically distributed. Such assumptions do not hold well in spatial data, where spatial dependency and spatial heterogeneity are a norm. In addition, spatial semantics are often ignored by the data mining algorithms. In this tutorial we cover recent advances in explicitly modeling of spatial dependencies and semantic concepts in data mining.

  2. Technology experience and economics of oil shale mining in Estonia

    SciTech Connect (OSTI)

    Fraiman, J.; Kuzmiv, I. [Estonian Oil Shale State Co., Jyhvi (Estonia). Scientific Research Center

    1995-11-01

    The exhaustion of fuel-energy resources became an evident problem of the European continent in the 1960s. Careful utilization of their own reserves of coal, oil, and gas (Germany, France, Spain) and assigned shares of imports of these resources make up the strategy of economic development of the European countries. The expansion of oil shale utilization is the most topical problem. The experience of mining oil shale deposits in Estonia and Russia, in terms of the practice and the economic results, is reviewed in this article. The room-and-pillar method of underground mining and the open-cut technology of clearing the ground ensure the fertility of a soil. The economics of underground and open pit oil shale mines is analyzed in terms of natural, organizational, and technical factors. These analyses are used in the planning and management of oil shale mining enterprises. The perspectives of the oil shale mining industry of Estonia and the economic expediency of multiproduction are examined. Recommendations and guidelines for future industrial utilization of oil shale are given in the summary.

  3. Coal mining and the resource community cycle: A longitudinal assessment of the social impacts of the Coppabella coal mine

    SciTech Connect (OSTI)

    Lockie, S.; Franettovich, M.; Petkova-Timmer, V.; Rolfe, J.; Ivanova, G.

    2009-09-15

    Two social impact assessment (SIA) studies of Central Queensland's Coppabella coal mine were undertaken in 2002-2003 and 2006-2007. As ex post studies of actual change, these provide a reference point for predictive assessments of proposed resource extraction projects at other sites, while the longitudinal element added by the second study illustrates how impacts associated with one mine may vary over time due to changing economic and social conditions. It was found that the traditional coupling of local economic vitality and community development to the life cycle of resource projects - the resource community cycle - was mediated by labour recruitment and social infrastructure policies that reduced the emphasis on localised employment and investment strategies. and by the cumulative impacts of multiple mining projects within relative proximity to each other. The resource community cycle was accelerated and local communities forced to consider ways of attracting secondary investment and/or alternative industries early in the operational life of the Coppabella mine in order to secure significant economic benefits and to guard against the erosion of social capital and the ability to cope with future downturns in the mining sector.

  4. Potential highwall use by raptors in coal mine reclamation

    SciTech Connect (OSTI)

    Waage, B.

    1990-12-31

    In 1982, Western Energy Company`s Rosebud Mine, located in southeastern Montana, received legal exception, {open_quotes}a first{close_quotes} in Montana to leave a standing mine highwall extending a native bluff. This bluff extension stands 110 feet high and 900 feet long. Normally, all highwalls by law are reduced to a 5:1 slope. This legal exception was accomplished with the support of several governmental agencies and was justified on the highwalls potential value for raptors. Enhancement measures undertaken on the highwall included the construction of three artificial eryies and the release of young prairie falcons (Falco mexicanus) employing hacking methods of the Peregrine Fund. The hack is now in its fourth year with a total of 46 young falcons having been released. Opportunities exist for creating a more diverse habitat for raptors and other cliff obligate species on reclaimed mine lands in the west. It is believed that this practical approach should be explored.

  5. Televised remote control system of a continuous mining machine

    SciTech Connect (OSTI)

    Lansberry, J.B.

    1981-08-04

    A method of recovering particulate material from a seam of such material within the earth bounded above and below by different material which comprises the steps of positioning in mining relation to the seam a continuous mining machine having a power driven mechanism thereon for moving the machine through successive seam material cutting cycles which include an advancing movement along a mined entry within the seam in a direction toward the working face of the seam; illuminating portions of the space surrounding the continuous mining machine including portions of the working face disposed forwardly thereof and adjacent portions of the roof, floor and side walls of the mined entry rearwardly of the working face; establishing electromagnetic signals indicative of the appearance of the illuminated portions of the working face of the seam and the adjacent portions of the roof, floor and side walls; transmitting the established electromagnetic signals to a remote control station; converting at the remote control station the transmitted electromagnetic signals to a continuous picture of the appearance of at least a selected portion of the illuminated portions of the working face of the seam and the adjacent portions of the roof, floor and side walls; and controlling from the remote control station the cutting cycle of the continuous mining machine so that the material cut during a cycle is cut from the seam up to the different material defining the roof and down to the different material defining the floor based upon visually distinguishing between the material of the seam and the different material which forms the roof and floor by viewing the continuous picture provided at the remote control station and apparatus for carrying out the method.

  6. Iowa State Mining and Mineral Resources Research Institute

    SciTech Connect (OSTI)

    Not Available

    1990-08-01

    This final report describes the activities of the Iowa State Mining and Mineral Resources Research Institute (ISMMRRI) at Iowa State University for the period July 1, 1989, to June 30, 1990. Activities include research in mining- and mineral-related areas, education and training of scientists and engineers in these fields, administration of the Institute, and cooperative interactions with industry, government agencies, and other research centers. During this period, ISMMRRI has supported research efforts to: (1) Investigate methods of leaching zinc from sphalerite-containing ores. (2) Study the geochemistry and geology of an Archean gold deposit and of a gold-telluride deposit. (3) Enchance how-quality aggregates for use in construction. (4) Pre-clean coal by triboelectric charging in a fluidized-bed. (5) Characterize the crystal/grain alignment during processing of yttrium-barium-copper-perovskite (1-2-3) superconductors. (5) Study the fluid inclusion properties of a fluorite district. (6) Study the impacts of surface mining on community planning. (7) Assess the hydrophobicity of coal and pyrite for beneficiation. (8) Investigate the use of photoacoustic absorption spectroscopy for monitoring unburnt carbon in the exhaust gas from coal-fired boilers. The education and training program continued within the interdepartmental graduate minor in mineral resources includes courses in such areas as mining methods, mineral processing, industrial minerals, extractive metallurgy, coal science and technology, and reclamation of mined land. In addition, ISMMRRI hosted the 3rd International Conference on Processing and Utilization of High-Sulfur Coals in Ames, Iowa. The Institute continues to interact with industry in order to foster increased cooperation between academia and the mining and mineral community.

  7. Performance potential of the coal strip mining in the east of Russia

    SciTech Connect (OSTI)

    Cheskidov, V.I.

    2007-07-15

    The potentialities of the leading mining districts in Russia to improve coal production by strip mining are analyzed. The operational issues of the Erunakovskiy (Kuzbass), Kansko-Achinskiy and South Yakutia territorial production complexes are considered.

  8. Standard on fire protection for self-propelled and mobile surface mining equipment. 2001 ed.

    SciTech Connect (OSTI)

    2001-07-01

    Safeguard life and property against fire and related hazards in mines with the latest requirements in NFPA 121. This 2001 edition covers fire detection, suppression, ignition sources, fire risk assessment and maintenance of mining equipment systems. 4 apps.

  9. Case Study for a Ground Source Heat Pump System using Mine Water...

    Office of Scientific and Technical Information (OSTI)

    System using Mine Water as Heat Sink and Source Citation Details In-Document Search Title: Case Study for a Ground Source Heat Pump System using Mine Water as Heat Sink and ...

  10. Case study of a mine water heat pump system (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Conference: Case study of a mine water heat pump system Citation Details In-Document Search Title: Case study of a mine water heat pump system Authors: Liu, Xiaobing 1 ; ...

  11. OSTIblog Articles in the gold mine Topic | OSTI, US Dept of Energy...

    Office of Scientific and Technical Information (OSTI)

    gold mine Topic Mining for Gold, Neutrinos and the Neutrinoless Double Beta Decay by Kathy Chambers 23 Sep, 2014 in Deep within the caverns of Lead, South Dakota is one of the ...

  12. Microsoft Word - DOE-ID-12-013 Colorado School of Mines.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    School of Mines SECTION B. Project Description The Colorado School of Mines will purchase a Robo-Met.3D automated polishing, serial-sectioning, and image acquisition station. ...

  13. NPDES compliance monitoring report: Silver bell mine, Pima County, Arizona. Final report

    SciTech Connect (OSTI)

    Ganter, W.

    1992-10-01

    This presents the findings of a compliance evaluation inspection of the Silver Bell Mine in Pima County, Arizona, conducted on August 19, 1992. It is part of a series of inspections of uncontrolled discharges of mine drainage.

  14. NPDES compliance monitoring report: Oracle Ridge Mine, San Manuel, Arizona. Draft report

    SciTech Connect (OSTI)

    Stevens, J.

    1992-11-03

    This presents the findings of a compliance evaluation inspection of the Oracle Ridge Copper Mine near San Manuel, Arizona, conducted on August 17, 1992. It is part of a series of inspections of uncontrolled discharges of mine drainage.

  15. XsunX Inc formerly Sun River Mining Inc | Open Energy Information

    Open Energy Info (EERE)

    XsunX Inc formerly Sun River Mining Inc Jump to: navigation, search Name: XsunX Inc (formerly Sun River Mining Inc) Place: Aliso Viejo, California Zip: 92656 Product: US-based...

  16. Update on use of mine pool water for power generation.

    SciTech Connect (OSTI)

    Veil, J. A.; Puder, M. G.; Environmental Science Division

    2006-09-30

    In 2004, nearly 90 percent of the country's electricity was generated at power plants using steam-based systems (EIA 2005). Electricity generation at steam electric plants requires a cooling system to condense the steam. With the exception of a few plants using air-cooled condensers, most U.S. steam electric power plants use water for cooling. Water usage occurs through once-through cooling or as make-up water in a closed-cycle system (generally involving one or more cooling towers). According to a U.S. Geological Survey report, the steam electric power industry withdrew about 136 billion gallons per day of fresh water in 2000 (USGS 2005). This is almost the identical volume withdrawn for irrigation purposes. In addition to fresh water withdrawals, the steam electric power industry withdrew about 60 billion gallons per day of saline water. Many parts of the United States are facing fresh water shortages. Even areas that traditionally have had adequate water supplies are reaching capacity limits. New or expanded steam electric power plants frequently need to turn to non-traditional alternate sources of water for cooling. This report examines one type of alternate water source-groundwater collected in underground pools associated with coal mines (referred to as mine pool water in this report). In 2003, the U.S. Department of Energy's (DOE's) National Energy Technology Laboratory (NETL) funded Argonne National Laboratory (Argonne) to evaluate the feasibility of using mine pool water in Pennsylvania and West Virginia. That report (Veil et al. 2003) identified six small power plants in northeastern Pennsylvania (the Anthracite region) that had been using mine pool water for over a decade. It also reported on a pilot study underway at Exelon's Limerick Generating Station in southeastern Pennsylvania that involved release of water from a mine located about 70 miles upstream from the plant. The water flowed down the Schuylkill River and augmented the natural flow so that

  17. Surface Mining Control and Reclamation Act: A Utah perspective

    SciTech Connect (OSTI)

    Nielson, D.

    1989-01-01

    The authority to regulate the coal industry at the state level, under state statute and rules, the importance of the coal industry to the state, the importance of an environmentally sound regulatory program, and the benefit of a state-managed abandoned mine reclamation program, in short the ability of the state to manage its own natural resources, make state primacy a necessity, not an option. Implementation of SMCRA cannot be measured in the myriad of oversight statistics. Effectiveness means cost-effective, timely reclamation of abandoned sites; consistent, workable rules and regulatory practices; responsive program management; and compliance which is internalized in the mine's operations.

  18. Wyoming coal mining: a wage and employment survey, 1984

    SciTech Connect (OSTI)

    Wessel, L.E.

    1984-05-01

    The Wyoming Department of Labor and Statistics initiated a wage and employment survey of the State's coal mining industry during the first quarter of 1984. The survey was designed to update the statistics obtained in the 1982 survey of Wyoming's coal mines. Specifically, data were collected to: (1) estimate the number of workers in selected occupational categories; (2) determine the average straight-time hourly wage in each occupational category; (3) determine the number of workers covered by a collective bargaining agreement in each occupational category; and (4) review the employer contributions to employee fringe benefit programs. 11 references, 5 figures, 6 tables.

  19. The Economic Impact of Coal Mining in New Mexico

    SciTech Connect (OSTI)

    Peach, James; Starbuck, C.

    2009-06-01

    The economic impact of coal mining in New Mexico is examined in this report. The analysis is based on economic multipliers derived from an input-output model of the New Mexico economy. The direct, indirect, and induced impacts of coal mining in New Mexico are presented in terms of output, value added, employment, and labor income for calendar year 2007. Tax, rental, and royalty income to the State of New Mexico are also presented. Historical coal production, reserves, and price data are also presented and discussed. The impacts of coal-fired electricity generation will be examined in a separate report.

  20. WIPP Team Chosen as Overall Champion at National Mine Rescue Competition |

    Office of Environmental Management (EM)

    Department of Energy Team Chosen as Overall Champion at National Mine Rescue Competition WIPP Team Chosen as Overall Champion at National Mine Rescue Competition August 28, 2014 - 12:00pm Addthis CBFO Manager Joe Franco (sixth from left) with the WIPP Red Team and competition officials at the 2014 National Metal and Nonmetal Mine Rescue Competition. CBFO Manager Joe Franco (sixth from left) with the WIPP Red Team and competition officials at the 2014 National Metal and Nonmetal Mine Rescue

  1. Nature-oriented open coal mining technologies using mined-out space in an open-pit. Part II: A method for selecting rational sequence of mining flat dipping stratified deposits

    SciTech Connect (OSTI)

    Molotilov, S.G.; Norri, V.K.; Cheskidov, V.I.; Mattis, A.R.

    2007-01-15

    A method is proposed for selecting a rational mining sequence with internal dumping for flat stratified deposits, using new principles of the open-pit process-space formation and development. The main criteria for substantiating the mining sequence are geometrical form and development direction of the open-pit space, structure of the working wall and transportation network, internal dumping capacities and mining earthworks volumes.

  2. In-mine evaluation of catalyzed diesel particulate filters at two underground metal mines. Report of investigations/1995

    SciTech Connect (OSTI)

    Watts, W.F.; Cantrell, B.K.; Bickel, K.L.; Olson, K.S.; Rubow, K.L.

    1995-11-01

    The U.S. Bureau of Mines evaluated the performance of a catalyzed diesel particulate filter (CDPF) and a CDPF combined with a diesel oxidation catalyst (DOC) at two metal mines. This paper describes the results from the two field evaluations. The CDPF/DOC was installed on an Elphinstone load-haul-dump (LHD) powered by a Caterpillar 3306 prechambered, turbocharged engine. The CDPF was installed on a Tamrock diesel-hydraulic roof-bolting jumbo, powered by a Deutz F6L912W engine. The underground evaluation at this mine was more difficult because of frequent movement by the roof-bolting jumbo, variation in the daily workload, tremendous fluctuation in ventilation air flow rate and the use of a high sulfur diesel fuel, which promotes the formation of sulfate particles, decreases filtration efficiency, and hastens the deterioration of the catalyst.

  3. After 105 Years, Historic City Hall in West Des Moines, Iowa...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... credit: Vicky Saylor EECBG Success Story: After 105 Years, Historic City Hall in West Des Moines, Iowa Goes Green Using money from the Energy Efficiency Block Grant Program, St. ...

  4. Sciences and society

    SciTech Connect (OSTI)

    2008-01-10

    J.Luns des Pays-Bas, ancien sctaire gnral de NATO (OTAN=Organisation du trait de l'Atlantique Nord) parle du pass, prsent et future de la dfense europenne et des relations est et ouest

  5. Outgassing rate of Reemay Spunbonded Polyester and DuPont Double Aluminized Mylar

    SciTech Connect (OSTI)

    Todd, R.J.; Pate, D.; Welch, K.M.

    1993-08-01

    This paper presents the outgassing rates of two commercially available multi-layer insulation (MLI) materials commonly used in cryogenic applications. Both Reemay Spunbonded Polyester and DuPont Double Aluminized Mylar (DAM) were studied for outgassing species and respective rates, and the total amount of outgassed material. Measurements were made using a Fixed Aperture Technique. A sample was pumped on through an aperture of known size with a turbomolecular pump. Pressure vs. time was plotted for both Reemay and DAM, as well as the baseline system, and data conveniently extrapolated to {approx}1,000 hrs. A quadrupole residual gas analyzer was used to measure the outgassing species.

  6. DuPont Displays Develops Low-Cost Method of Printing OLED Panels

    Office of Energy Efficiency and Renewable Energy (EERE)

    DuPont Displays Inc. (DDI) has developed a novel way of printing color-tunable OLED lighting panels that keeps manufacturing costs low. The method involves processing the organic layers from solution, with most of the process steps taking place under atmospheric conditions rather than in a high vacuum. Industry-standard slot-coating methods are used in conjunction with nozzle printing—in which the solutions of organic materials are continuously jetted through an array of nozzles moving at high speed—allowing the light-emitting materials to be spatially patterned.

  7. Lac du Flambeau Band of Lake Superior Chippewa Indians Strategic Energy Plan

    SciTech Connect (OSTI)

    Bryan Hoover

    2009-11-16

    This plan discusses the current energy use on the Lac du Flambeau Reservation, the current status of the Tribe's energy program, as well as the issues and concerns with energy on the reservation. This plan also identifies and outlines energy opportunities, goals, and objectives for the Tribe to accomplish. The overall goal of this plan is to address the energy situation of the reservation in a holistic manner for the maximum benefit to the Tribe. This plan is an evolving document that will be re-evaluated as the Tribe's energy situation changes.

  8. DOE - Office of Legacy Management -- E I Du Pont Grasselli Plant - OH 03

    Office of Legacy Management (LM)

    Grasselli Plant - OH 03 FUSRAP Considered Sites Site: E.I. Du Pont, Grasselli Plant (OH.03 ) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Grasselli Laboratories Standard Oil Company of Ohio OH.03-1 OH.03-2 Location: 3092 Broadway Avenue , Cleveland , Ohio OH.03-4 Evaluation Year: 1985 OH.03-3 Site Operations: Tested processes for jacketing uranium slugs with zinc, aluminum, silicon and brass in the 1940s OH.03-5 OH.03-6 Site Disposition: Eliminated -

  9. Ami M. DuBois, John David Lee, and Abdulgadar F. Almagri

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    high time resolution x-ray diagnostic on the Madison Symmetric Torus Ami M. DuBois, John David Lee, and Abdulgadar F. Almagri Citation: Review of Scientific Instruments 86, 073512 (2015); doi: 10.1063/1.4927454 View online: http://dx.doi.org/10.1063/1.4927454 View Table of Contents: http://scitation.aip.org/content/aip/journal/rsi/86/7?ver=pdfcov Published by the AIP Publishing Articles you may be interested in Upgrades of imaging x-ray crystal spectrometers for high-resolution and

  10. Lac du Flambeau Band of Lake Superior Chippewa Indians - Conservation and Renewable Energy Planning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bryan Hoover Lac du Flambeau Band of Lake Superior Chippewa Indians November 20, 2008 * Located in North Central Wisconsin. * The reservation is 144 square miles or 86,000 acres. * Population 3,400 Tribal Members. * Checkerboard Reservation * Area- 86,630 acres or 144 square miles * Land Ownership- 66.8%-Tribal land 33.2%-Fee land * 260 Lakes * 71 Miles of Streams * 24,000 Acres of Wetlands * 41,733 Acres of Forests * Develop and evaluate baseline data on energy consumption, costs, trends and

  11. Explorer : des clés pour mieux comprendre la matière

    ScienceCinema (OSTI)

    None

    2011-10-06

    Le LHC va-t-il bouleverser les théories de l'infiniment petit ? Les physiciens aimeraient que l'accélérateur fasse trembler le modèle standard. Cette théorie des particules élémentaires et des forces laisse de nombreuses zones d'ombre. Le LHC et ses expériences ont été conçus pour les éclairer.

  12. Types and causes of haulage-system delays out by the face in US underground coal mines. Final report. [Data from 5 mines

    SciTech Connect (OSTI)

    Douglas, W.J.; Kiefer, J.A.; Kohler, J.L.

    1982-04-01

    This report summarizes the results of a study to characterize and quantify the occurrence and impact of outby haulage delays on production in US underground coal mines. An instrumentation system employing digital data loggers was used to acquire data for over 500 belt shifts in six mines. Observers collected section production data and section delay data to supplement the haulage database. A statistical data reduction system was applied to develop statistics on failure rates and delay lengths. A production impact model was developed and applied to analyze the effect of reducing delays and implementing engineering changes to the haulage systems. Analytical investigations of the relationship between delays and mine characteristics were conducted, and the impact of feeder-breakers and bunkerage, and the addition of longwall units to existing mines was investigated. The study provides a quantitative information base on underground belt haulage delays for use by mining companies and mining researchers.

  13. Effective Conveyor Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    Chris Fromme

    2006-06-01

    This document details progress on the project entitled ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2004 to May 14, 2004. Highlights include fabrication of low-cost prototype hardware, acquisition of infrared thermal data, and initial design of a Smart-Camera based system.

  14. Effective Conveyor Belt Inspection for Improved Mining Productivity

    SciTech Connect (OSTI)

    Chris Fromme

    2006-06-01

    This document details progress on the project entitled ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2004 to May 14, 2004. Highlights include fabrication of an improved LED lightbar, fabrication of a line-scan sensor head for the Smart-Camera based prototype, and development of prototype vulcanized splice detection algorithms.

  15. Remote mining for in-situ waste containment. Final report

    SciTech Connect (OSTI)

    Martinelli, D.; Banta, L.; Peng, S.

    1995-10-01

    This document presents the findings of a study conducted at West Virginia University to determine the feasibility of using a combination of longwall mining and standard landfill lining technologies to mitigate contamination of groundwater supplies by leachates from hazardous waste sites.

  16. Evaluation of the Kloswall longwall mining system. Final report

    SciTech Connect (OSTI)

    Not Available

    1982-04-01

    This report presents the results of design studies and critical requiremental tests of a new longwall mining system specifically designed to extract a very deep web (48 inches or deeper) from a longwall panel. The report includes a productivity and cost analysis comparing the new mining system with a conventional longwall operation taking a 30-inch wide web. The analysis shows the new system will increase annual production and return on investment in most cases. The report also includes conceptual drawings and specifications for a high capacity three-drum shearer and a unique shield type of roof support specifically designed for very wide web operation. The advantages and problems associated with wide web mining are discussed in general and as they relate specifically to the equipment selected for the new mining system. Details of the critical testing and the test results are presented. The study concludes by recommending that surface tests of the haulage and guidance system be conducted as the follow-on work.

  17. Some implications of in situ uranium mining technology development

    SciTech Connect (OSTI)

    Cowan, C.E.; Parkhurst, M.A.; Cole, R.J.; Keller, D.; Mellinger, P.J.; Wallace, R.W.

    1980-09-01

    A technology assessment was initiated in March 1979 of the in-situ uranium mining technology. This report explores the impediments to development and deployment of this technology and evaluates the environmental impacts of a generic in-situ facility. The report is divided into the following sections: introduction, technology description, physical environment, institutional and socioeconomic environment, impact assessment, impediments, and conclusions. (DLC)

  18. EXAFS of heavy metal coordination in acid mine drainage sediments

    SciTech Connect (OSTI)

    Carroll, S.; O`Day, P.; Waychunas, G.; Phillips, B.

    1995-12-01

    We use extended x-ray adsorption fine structure (EXAFS) spectroscopy to examine the chemical environment of zinc (1-2 wt. %), lead (300-600 ppm) and cadmium (50-200 ppm) in complex acid mine drainage sediments from the Tri-State Mining District (KS, MO, OK). The sediments in streams draining tailings piles and open mine shafts are dominated by quartz or amorphous iron hydroxides; accessory minerals include calcite. The bulk water chemistry is buffered by the limestone geology and is undersaturated with respect to pure heavy metal carbonates and hydroxides. EXAFS spectra of the sediment samples were taken at SSRL with a fluorescence detector at low temperature ({approximately}10 K). Heavy metals do not form pure carbonate or hydroxide phases, nor do they appear to sorb to quartz surfaces. In sediments near the mine source, the metals are present primarily as sulfides, the original host mineral. With increasing distance from the source, second-neighbor backscattering from Fe indicates that the metals leached from the sulfides are taken up with amorphous iron hydroxides.

  19. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    SciTech Connect (OSTI)

    Kenneth L. Knittel

    2005-05-09

    The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Kyocera also continued research of the FM systems with the intention of developing commercial markets for a variety of applications. The continued development of FM technology by Kyocera is seen as a direct result of the cooperation established under this funding. Kyocera has a specific interest in the commercial development of the FM technology and have licensed it and have paid

  20. Big River mine tailings Superfund site lead exposure study, Jefferson City, Missouri. Final report

    SciTech Connect (OSTI)

    Murgueytio, A.M.; Clardy, S.A.; Sterling, D.A.; Shadel, B.N.; Clements, B.W.

    1998-08-01

    The purpose of this study was to determine if living close to the Big River Mine Tailings Superfund site increased blood lead levels of resident children and what contribution mining waste had to any increase. The results of this study indicated that blood lead levels were a product of exposure to lead mining waste, lead-based paint, and other sources. Because the only substantial difference between the study and control areas, in terms of exposure to lead, was the presence of lead mining, mining waste is the reasonable explanation for the difference between the blood lead levels in the two communities.

  1. INTEGRATED ROBOT-HUMAN CONTROL IN MINING OPERATIONS

    SciTech Connect (OSTI)

    George Danko

    2005-04-01

    This report contains a detailed description of the work conducted in the first year of the project on Integrated Robot-Human Control in Mining Operations at University of Nevada, Reno. This project combines human operator control with robotic control concepts to create a hybrid control architecture, in which the strengths of each control method are combined to increase machine efficiency and reduce operator fatigue. The kinematics reconfiguration type differential control of the excavator implemented with a variety of ''software machine kinematics'' is the key feature of the project. This software re-configured excavator is more desirable to execute a given digging task. The human operator retains the master control of the main motion parameters, while the computer coordinates the repetitive movement patterns of the machine links. These repetitive movements may be selected from a pre-defined family of trajectories with different transformations. The operator can make adjustments to this pattern in real time, as needed, to accommodate rapidly-changing environmental conditions. A Bobcat{reg_sign} 435 excavator was retrofitted with electro-hydraulic control valve elements. The modular electronic control was tested and the basic valve characteristics were measured for each valve at the Robotics Laboratory at UNR. Position sensors were added to the individual joint control actuators, and the sensors were calibrated. An electronic central control system consisting of a portable computer, converters and electronic driver components was interfaced to the electro-hydraulic valves and position sensors. The machine is operational with or without the computer control system depending on whether the computer interface is on or off. In preparation for emulated mining tasks tests, typical, repetitive tool trajectories during surface mining operations were recorded at the Newmont Mining Corporation's ''Lone Tree'' mine in Nevada.

  2. Evaluation of airborne geophysical surveys for large-scale mapping of contaminated mine pools: draft final report

    SciTech Connect (OSTI)

    Hammack, R. W.

    2006-12-28

    Decades of underground coal mining has left about 5,000 square miles of abandoned mine workings that are rapidly filling with water. The water quality of mine pools is often poor; environmental regulatory agencies are concerned because water from mine pools could contaminate diminishing surface and groundwater supplies. Mine pools are also a threat to the safety of current mining operations. Conversely, mine pools are a large, untapped water resource that, with treatment, could be used for a variety of industrial purposes. Others have proposed using mine pools in conjunction with heat pumps as a source of heating and cooling for large industrial facilities. The management or use of mine pool water requires accurate maps of mine pools. West Virginia University has predicted the likely location and volume of mine pools in the Pittsburgh Coalbed using existing mine maps, structure contour maps, and measured mine pool elevations. Unfortunately, mine maps only reflect conditions at the time of mining, are not available for all mines, and do not always denote the maximum extent of mining. Since 1999, the National Energy Technology Laboratory (NETL) has been evaluating helicopter-borne, electromagnetic sensing technologies for the detection and mapping of mine pools. Frequency domain electromagnetic sensors are able to detect shallow mine pools (depth < 50 m) if there is sufficient contrast between the conductance of the mine pool and the conductance of the overburden. The mine pools (conductors) most confidently detected by this technology are overlain by thick, resistive sandstone layers. In 2003, a helicopter time domain electromagnetic sensor was applied to mined areas in southwestern Virginia in an attempt to increase the depth of mine pool detection. This study failed because the mine pool targets were thin and not very conductive. Also, large areas of the surveys were degraded or made unusable by excessive amounts of cultural electromagnetic noise that obscured the

  3. Western surface mine permitting and reclamation. Volume 2. Contractor documents. Part B. Hydrologic evaluation and reclamation technologies for western surface coal mining

    SciTech Connect (OSTI)

    Not Available

    1986-07-01

    The report presents an analysis of the hydrologic evaluation and reclamation technologies of western surface coal mining as they have evolved and advanced since passage of the Federal Surface Mine Control and Reclamation Act of 1977 (SMCRA). The primary emphasis of the report is threefold, addressing: Hydrologic data used in the preparation and review of mining and reclamation plans. Analytical techniques used to predict and evaluate the hydrologic impacts of mining. Evaluation criteria used to determine the success of hydrologic restoration. The report also discusses special reclamation practices used to preserve and restore the essential hydrologic functions of alluvial valley floors.

  4. Department of the Interior's Office of Surface Mining should more fully recover or eliminate its costs of regulating coal mining

    SciTech Connect (OSTI)

    Not Available

    1985-05-28

    The Department of the Interior's Office of Surface Mining Reclamation and Enforcement (OSM) is spending about $65 million annually to implement regulatory program requirements of the Surface Mining Control and Reclamation Act of 1977. The act requires the regulatory authority, whether OSM or that of a state with an OSM-approved program, to charge fees to mining operators for reviewing, enforcing, and administering coal mine operating permits and authorizes that the amount of such fees can fully recover costs. The OSM and states assess certain fees, but the fees recover only a small portion of their program costs. GAO found that if OSM and states fully recovered their regulatory costs, OSM could save over $50 million a year and the impact on coal demand and production would be minimal. GAO recommends that the Secretary of the Interior collect fees that fully recover OSM's regulatory costs, phase out or substantially reduce financial assistance to states, and encourage states to fully recover their own costs.

  5. Mortality in Appalachian coal mining regions: the value of statistical life lost

    SciTech Connect (OSTI)

    Hendryx, M.; Ahern, M.M.

    2009-07-15

    We examined elevated mortality rates in Appalachian coal mining areas for 1979-2005, and estimated the corresponding value of statistical life (VSL) lost relative to the economic benefits of the coal mining industry. We compared age-adjusted mortality rates and socioeconomic conditions across four county groups: Appalachia with high levels of coal mining, Appalachia with lower mining levels, Appalachia without coal mining, and other counties in the nation. We converted mortality estimates to VSL estimates and compared the results with the economic contribution of coal mining. We also conducted a discount analysis to estimate current benefits relative to future mortality costs. The heaviest coal mining areas of Appalachia had the poorest socioeconomic conditions. Before adjusting for covariates, the number of excess annual age-adjusted deaths in coal mining areas ranged from 3,975 to 10,923, depending on years studied and comparison group. Corresponding VSL estimates ranged from $18.563 billion to $84.544 billion, with a point estimate of $50.010 billion, greater than the $8.088 billion economic contribution of coal mining. After adjusting for covariates, the number of excess annual deaths in mining areas ranged from 1,736 to 2,889, and VSL costs continued to exceed the benefits of mining. Discounting VSL costs into the future resulted in excess costs relative to benefits in seven of eight conditions, with a point estimate of $41.846 billion.

  6. Spoil handling and reclamation costs at a contour surface mine in steep slope Appalachian topography

    SciTech Connect (OSTI)

    Zipper, C.E.; Hall, A.T.; Daniels, W.L.

    1985-12-09

    Accurate overburden handling cost estimation methods are essential to effective pre-mining planning for post-mining landforms and land uses. With the aim of developing such methods, the authors have been monitoring costs at a contour surface mine in Wise County, Virginia since January 1, 1984. Early in the monitoring period, the land was being returned to its Approximate Original Contour (AOC) in a manner common to the Appalachian region since implementation of the Surface Mining Control and Reclamation Act of 1977 (SMCRA). More recently, mining has been conducted under an experimental variance from the AOC provisions of SMCRA which allowed a near-level bench to be constructed across the upper surface of two mined points and an intervening filled hollow. All mining operations are being recorded by location. The cost of spoil movement is calculated for each block of coal mined between January 1, 1984, and August 1, 1985. Per cubic yard spoil handling and reclamation costs are compared by mining block. The average cost of spoil handling was $1.90 per bank cubic yard; however, these costs varied widely between blocks. The reasons for those variations included the landscape positions of the mining blocks and spoil handling practices. The average reclamation cost was $0.08 per bank cubic yard of spoil placed in the near level bench on the mined point to $0.20 for spoil placed in the hollow fill. 2 references, 4 figures.

  7. DG's Meeting

    ScienceCinema (OSTI)

    None

    2011-04-25

    Exposés du DG H.Schopper, Blackburne et du président du comité des finances concernant le budget, salaires, pensions etc...avec discussion et questions

  8. Preliminary analysis of surface mining options for Naval Oil Shale Reserve 1

    SciTech Connect (OSTI)

    Not Available

    1981-07-20

    The study was undertaken to determine the economic viability of surface mining to exploit the reserves. It is based on resource information already developed for NOSR 1 and conceptual designs of mining systems compatible with this resource. Environmental considerations as they relate to surface mining have been addressed qualitatively. The conclusions on economic viability were based primarily on mining costs projected from other industries using surface mining. An analysis of surface mining for the NOSR 1 resource was performed based on its particular overburden thickness, oil shale thickness, oil shale grade, and topography. This evaluation considered reclamation of the surface as part of its design and cost estimate. The capital costs for mining 25 GPT and 30 GPT shale and the operating costs for mining 25 GPT, 30 GPT, and 35 GPT shale are presented. The relationship between operating cost and stripping ratio, and the break-even stripping ratio (BESR) for surface mining to be competitive with room-and-pillar mining, are shown. Identification of potential environmental impacts shows that environmental control procedures for surface mining are more difficult to implement than those for underground mining. The following three areas are of prime concern: maintenance of air quality standards by disruption, movement, and placement of large quantities of overburden; disruption or cutting of aquifers during the mining process which affect area water supplies; and potential mineral leaching from spent shales into the aquifers. Although it is an operational benefit to place spent shale in the open pit, leaching of the spent shales and contamination of the water is detrimental. It is therefore concluded that surface mining on NOSR 1 currently is neither economically desirable nor environmentally safe. Stringent mitigation measures would have to be implemented to overcome some of the potential environmental hazards.

  9. Characterization of cores from an in-situ recovery mined uranium deposit in Wyoming: Implications for post-mining restoration

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    WoldeGabriel, G.; Boukhalfa, H.; Ware, S. D.; Cheshire, M.; Reimus, P.; Heikoop, J.; Conradson, S. D.; Batuk, O.; Havrilla, G.; House, B.; et al

    2014-10-08

    In-situ recovery (ISR) of uranium (U) from sandstone-type roll-front deposits is a technology that involves the injection of solutions that consist of ground water fortified with oxygen and carbonate to promote the oxidative dissolution of U, which is pumped to recovery facilities located at the surface that capture the dissolved U and recycle the treated water. The ISR process alters the geochemical conditions in the subsurface creating conditions that are more favorable to the migration of uranium and other metals associated with the uranium deposit. There is a lack of clear understanding of the impact of ISR mining on themore » aquifer and host rocks of the post-mined site and the fate of residual U and other metals within the mined ore zone. We performed detailed petrographic, mineralogical, and geochemical analyses of several samples taken from about 7 m of core of the formerly the ISR-mined Smith Ranch–Highland uranium deposit in Wyoming. We show that previously mined cores contain significant residual uranium (U) present as coatings on pyrite and carbonaceous fragments. Coffinite was identified in three samples. Core samples with higher organic (> 1 wt.%) and clay (> 6–17 wt.%) contents yielded higher 234U/238U activity ratios (1.0–1.48) than those with lower organic and clay fractions. The ISR mining was inefficient in mobilizing U from the carbonaceous materials, which retained considerable U concentrations (374–11,534 ppm). This is in contrast with the deeper part of the ore zone, which was highly depleted in U and had very low 234U/238U activity ratios. This probably is due to greater contact with the lixiviant (leaching solution) during ISR mining. EXAFS analyses performed on grains with the highest U and Fe concentrations reveal that Fe is present in a reduced form as pyrite and U occurs mostly as U(IV) complexed by organic matter or as U(IV) phases of carbonate complexes. Moreover, U–O distances of ~ 2.05 Å were noted, indicating the

  10. REPLY TO AllNOF: EM-421 SUBJECT: The File TO: Elimination of the DuBois Chemical Company Site from FUSRAP

    Office of Legacy Management (LM)

    q.w -' -fihsw+P 8063 6H-j DOEF 1325.8 . 8 @w - bnited States Government - Department of Energy memorandum DATE: DEC 14 1990 REPLY TO AllNOF: EM-421 SUBJECT: The File TO: Elimination of the DuBois Chemical Company Site from FUSRAP I have reviewed the attached preliminary site summary and recommendation for the DuBois Chemical Company site in Cincinnati. I have determined that there is little likelihood of contamination at this site. Based on the above, the DuBois Chemical Company Site is hereby

  11. Dynamic Slope Stability Analysis of Mine Tailing Deposits: the Case of Raibl Mine

    SciTech Connect (OSTI)

    Roberto, Meriggi; Marco, Del Fabbro; Erica, Blasone; Erica, Zilli

    2008-07-08

    Over the last few years, many embankments and levees have collapsed during strong earthquakes or floods. In the Friuli Venezia Giulia Region (North-Eastern Italy), the main source of this type of risk is a slag deposit of about 2x10{sup 6} m{sup 3} deriving from galena and lead mining activity until 1991 in the village of Raibl. For the final remedial action plan, several in situ tests were performed: five boreholes equipped with piezometers, four CPTE and some geophysical tests with different approaches (refraction, ReMi and HVSR). Laboratory tests were conducted on the collected samples: geotechnical classification, triaxial compression tests and constant head permeability tests in triaxial cell. Pressure plate tests were also done on unsaturated slag to evaluate the characteristic soil-water curve useful for transient seepage analysis. A seepage analysis was performed in order to obtain the maximum pore water pressures during the intense rainfall event which hit the area on 29th August 2003. The results highlight that the slag low permeability prevents the infiltration of rainwater, which instead seeps easily through the boundary levees built with coarse materials. For this reason pore water pressures inside the deposits are not particularly influenced by rainfall intensity and frequency. Seismic stability analysis was performed with both the pseudo-static method, coupled with Newmark's method, and dynamic methods, using as design earthquake the one registered in Tolmezzo (Udine) on 6{sup th} May 1976. The low reduction of safety factors and the development of very small cumulative displacements show that the stability of embankments is assured even if an earthquake of magnitude 6.4 and a daily rainfall of 141.6 mm occur at the same time.

  12. Cosmic Shear Measurements with DES Science Verification Data

    SciTech Connect (OSTI)

    Becker, M. R.

    2015-07-20

    We present measurements of weak gravitational lensing cosmic shear two-point statistics using Dark Energy Survey Science Verification data. We demonstrate that our results are robust to the choice of shear measurement pipeline, either ngmix or im3shape, and robust to the choice of two-point statistic, including both real and Fourier-space statistics. Our results pass a suite of null tests including tests for B-mode contamination and direct tests for any dependence of the two-point functions on a set of 16 observing conditions and galaxy properties, such as seeing, airmass, galaxy color, galaxy magnitude, etc. We use a large suite of simulations to compute the covariance matrix of the cosmic shear measurements and assign statistical significance to our null tests. We find that our covariance matrix is consistent with the halo model prediction, indicating that it has the appropriate level of halo sample variance. We also compare the same jackknife procedure applied to the data and the simulations in order to search for additional sources of noise not captured by the simulations. We find no statistically significant extra sources of noise in the data. The overall detection significance with tomography for our highest source density catalog is 9.7σ. Cosmological constraints from the measurements in this work are presented in a companion paper (DES et al. 2015).

  13. Site-specific study on stabilization of acid-generating mine tailings using coal fly ash

    SciTech Connect (OSTI)

    Shang, J.Q.; Wang, H.L.; Kovac, V.; Fyfe, J.

    2006-03-15

    A site-specific study on stabilizing acid-generating mine tailings from Sudbury Mine using a coal fly ash from Nanticoke Generating Station is presented in this paper. The objective of the study is to evaluate the feasibility of codisposal of the fly ash and mine tailings to reduce environmental impacts of Sudbury tailings disposal sites. The study includes three phases, i.e., characterization of the mine tailings, and coal fly ash, oxidation tests on the mine tailings and kinetic column permeation tests. The results of the experiments indicate that when permeated with acid mine drainage, the hydraulic conductivity of Nanticoke coal fly ash decreased more than three orders of magnitude (from 1 x 10{sup -6} to 1 x 10{sup -9} cm/s), mainly due to chemical reactions between the ash solids and acid mine drainage. Furthermore, the hydraulic gradient required for acid mine drainage to break through the coal fly ash is increased up to ten times (from 17 to 150) as compared with that for water. The results also show that the leachate from coal fly ash neutralizes the acidic pore fluid of mine tailings. The concentrations of trace elements in effluents from all kinetic column permeation tests indicated that coplacement of coal fly ash with mine tailings has the benefit of immobilizing trace elements, especially heavy metals. All regulated element concentrations from effluent during testing are well below the leachate quality criteria set by the local regulatory authority.

  14. The states and deregulation: The case of surface mining

    SciTech Connect (OSTI)

    Scicchitano, M.J.; Hedge, D.; Metz, P.

    1989-01-01

    The Surface Mining Control and Reclamation Act of 1977 (SMCRA), passed to correct the abuses of surface mining, assigned key implementation roles to the states. While the federal government originally enforced SMCRA states could operate the program themselves. Once states decided to run their own program the federal government would oversee them to insure they properly enforce the Act. This research examines the enforcement behavior of states in the 1980s. The results indicate that early in the Reagan administration eastern states enforced the SMCRA less stringently than other states. Eastern states increased their level of enforcement later in the 1980s in response to pressures for increased federal oversight from Congress, interest groups and others.

  15. Underground coal operators install several new longwall mining systems

    SciTech Connect (OSTI)

    Fiscor, S.

    2008-02-15

    Several new names appear in the annual US Longwall Census, but the population remains the same: 52 although the number of longwall mines dropped from 40 to 47. CONSOL Energy remains the leader with 12 faces. Robert E. Murray owns 8 longwall mines followed by Arch Coal with 5 and Foundation Coal with 3. West Virginia has 13 longwalls followed by 9 in Pennsylvania, 7 in Utah and 6 in Alabama. The article describes CONSOL Energy's operations. A detailed table gives for each longwall installation, the ownership, seam height, cutting height, panel width and length, overburden, number of gate entries, depth of cut, model of equipment used (shearer, haulage system, roof support, face conveyor, stage loader, crusher, electrical controls and voltage to face). 2 tabs.

  16. Psycho-social aspects of productivity in underground coal mining

    SciTech Connect (OSTI)

    Akin, G.

    1981-10-01

    This report presents the results of an investigation into the psycho-social aspects of productivity in underground coal mining. Chapter 1 reviews the status of the literature on labor productivity changes. Chapter 2 is an introduction to current concepts and research on psycho-social factors in productivity, with a survey of experiments in productivity improvement presented in Chapter 3. Chapter 4 discusses the impact of the introduction of new technology on the social system and the way that it accomplishes production. Chapter 5 presents a clinical study of a coal mining operation, and develops a model of how production is actually accomplished by workers at the coal face. Implications and recommendations for new technology design, implementation and ongoing management are presented in Chapter 6.

  17. Feasibility of high recovery highwall mining equipment. Final report

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    Three equipment systems exhibited significant promise: the RSV Miner, a surface longwall using standard underground equipment, and the variable angle auger. Other equipment systems showing considerable merit were the surface shortwall, and the two extended depth augers. Of the three most significant systems, the RSV Miner exhibits the greatest versatility and adaptability. It may be used competently in many surface mining applications and readily adapts to geologic anomalies and changing seam heights. The machine employs steering and guidance equipment and provides the necessary capabilities for extended depth operation. Safety is good, as no men are required to work underground. However, most important is the system's recovery factor of approximately 75% to 80% of the in-situ coal reserve within reach. The surface longwall system using standard underground equipment (preferably a ranging drum shearer in conjunction with shield supports) is most suited to either a trench mining or a modified area mining application. Both applications would allow the length of the face to be held constant. Another important consideration is legal requirements for a tailgate entry, which would necessitate additional equipment for development in a modified area mining application. When compared to surface shortwall, surface longwall exhibits higher productivity, a far greater equipment selection which allows system tailoring to geologic conditions, and greater roof control due to the significantly smaller section of overburden that must be supported. Recovery should approach, and possibly exceed, 90% of the coal in-place. The variable angle auger, which is currently only a concept, fills a very real need for which no other equipment is available at this time.

  18. Westinghouse TRU Solutions LLC Earns Corporate Award for Mining Operations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Earns Corporate Award for Mining Operations CARLSBAD, N.M., May 3, 2001 - Washington Group International has selected Westinghouse TRU Solutions LLC (WTS) for a 2000 Eagle Award. WTS is the management and operating contractor for the U.S. Department of Energy (DOE) at the Waste Isolation Pilot Plant (WIPP). Washington Group International's annual Eagle Awards Program acknowledges and honors extraordinary projects, teams and individual performers. Washington Group International is the parent

  19. MINING PENNSYLVANIA NATIONAL ENERGY TECHNOLOGY LAB - PA POC

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MINING PENNSYLVANIA NATIONAL ENERGY TECHNOLOGY LAB - PA POC Larry Sullivan Telephone (412) 386-6115 Email larry.sullivan@netl.doe.gov Support Activities for Oil and Gas Operations 213112 WEST VIRGINIA NATIONAL ENERGY TECHNOLOGY LAB -WV POC Larry Sullivan Telephone (412) 386-6115 Email larry.sullivan@netl.doe.gov Support Activities for Oil and Gas Operations 213112 WYOMING ROCKY MOUNTAIN OILFIELD CENTER POC Jenny Krom Telephone (307) 233-4818 Email jenny.krom@rmotc.doe.gov Support Activities for

  20. The ABCs of pump selection for mine dewatering

    SciTech Connect (OSTI)

    Morgan, S.E.

    2008-10-15

    Choosing the right type of pump for removing water from mine operations can provide significant benefits in overall performance and cost of operation. The article describes the types of pump most commonly used: vertical turbine pumps, electric and hydraulic submersible pumps, horizontal multistage centrifugal pumps and horizontal single-stage centrifugal pumps. It gives points to consider when selecting a suitable pump, including solids handling capacity and acid content, portability, automatic operation, easy maintenance and parts availability. 1 photo.

  1. The Methane to Markets Coal Mine Methane Subcommittee meeting

    SciTech Connect (OSTI)

    2008-07-01

    The presentations (overheads/viewgraphs) include: a report from the Administrative Support Group; strategy updates from Australia, India, Italy, Mexico, Nigeria, Poland and the USA; coal mine methane update and IEA's strategy and activities; the power of VAM - technology application update; the emissions trading market; the voluntary emissions reduction market - creating profitable CMM projects in the USA; an Italian perspective towards a zero emission strategies; and the wrap-up and summary.

  2. Geotomography applied at the Stripa Mine in Sweden

    SciTech Connect (OSTI)

    Okada, J.T.; Laine, E.F.; Lytle, R.J.; Daily,W.D.

    1980-04-07

    LLNL made ultrahigh-frequency (450-MHz) electromagnetic borehole-to-borehole transmissions in the Stripa Mine near Guldsmedshyttan, Sweden, in April 1979. Transmission loss measurements were made between four sets of 76-mm boreholes 30 m long, located at the end of a drift. Distances between the boreholes varied from 2 to 22 m. More than 25,000 data points were taken. A geotomograph was constructed to show the variation of attenuation between boreholes. The observed spatial variation of electromagnetic attenuation may be related to the expected stress relief created by the mine. Transmission loss measurements were also made between two converging boreholes drilled from the surface to points near the mine. Data taken at 21 MHz show a nearly uniform attenuation within this sampled region. These experiments demonstrate that geotomographic data collection/interpretation provides high-resolution images of the underground environment and can provide useful input to those charged with providing the detailed site characterizations needed for both short- and long-term monitoring of underground nuclear waste repositories.

  3. Mining multi-dimensional data for decision support

    SciTech Connect (OSTI)

    Donato, J.M.; Schryver, J.C.; Hinkel, G.C.; Schmoyer, R.L. Jr.; Grady, N.W.; Leuze, M.R. |

    1998-06-01

    While it is widely recognized that data can be a valuable resource for any organization, extracting information contained within the data is often a difficult problem. Attempts to obtain information from data may be limited by legacy data storage formats, lack of expert knowledge about the data, difficulty in viewing the data, or the volume of data needing to be processed. The rapidly developing field of Data Mining or Knowledge Data Discovery is a blending of Artificial Intelligence, Statistics, and Human-Computer Interaction. Sophisticated data navigation tools to obtain the information needed for decision support do not yet exist. Each data mining task requires a custom solution that depends upon the character and quantity of the data. This paper presents a two-stage approach for handling the prediction of personal bankruptcy using credit card account data, combining decision tree and artificial neural network technologies. Topics to be discussed include the pre-processing of data, including data cleansing, the filtering of data for pertinent records, and the reduction of data for attributes contributing to the prediction of bankruptcy, and the two steps in the mining process itself.

  4. Developing and Implementing the Data Mining Algorithms in RAVEN

    SciTech Connect (OSTI)

    Sen, Ramazan Sonat; Maljovec, Daniel Patrick; Alfonsi, Andrea; Rabiti, Cristian

    2015-09-01

    The RAVEN code is becoming a comprehensive tool to perform probabilistic risk assessment, uncertainty quantification, and verification and validation. The RAVEN code is being developed to support many programs and to provide a set of methodologies and algorithms for advanced analysis. Scientific computer codes can generate enormous amounts of data. To post-process and analyze such data might, in some cases, take longer than the initial software runtime. Data mining algorithms/methods help in recognizing and understanding patterns in the data, and thus discover knowledge in databases. The methodologies used in the dynamic probabilistic risk assessment or in uncertainty and error quantification analysis couple system/physics codes with simulation controller codes, such as RAVEN. RAVEN introduces both deterministic and stochastic elements into the simulation while the system/physics code model the dynamics deterministically. A typical analysis is performed by sampling values of a set of parameter values. A major challenge in using dynamic probabilistic risk assessment or uncertainty and error quantification analysis for a complex system is to analyze the large number of scenarios generated. Data mining techniques are typically used to better organize and understand data, i.e. recognizing patterns in the data. This report focuses on development and implementation of Application Programming Interfaces (APIs) for different data mining algorithms, and the application of these algorithms to different databases.

  5. Labor management positive change process (LMPCP) at Marissa Mine

    SciTech Connect (OSTI)

    Hird, T.; Becker, T.

    1997-12-01

    The authors discuss the {open_quotes}Labor Management Positive Change Process{close_quotes} (LMPCP) and the Marissa Mine. In the 1993 National Bituminous Coal Wage Agreement, there is a provision that allows for the establishment of the UMWA-BCOA labor management positive change process. This process provides the mechanism to deal with change. The major goal of this process is to increase job security, competitiveness, financial stability and opportunity for all employees covered by the agreement. The authors discuss the Marissa story concerning the LMPCP process. The process established some goals for the Marissa Mine. The main and most important goal was that the mine continue beyond the year 2000. They wanted to develop and implement a more cooperative working relationship; a relationship based on honesty, integrity, and mutual trust. They also wanted to utilize employees` responsibilities, skills, and ideas. They wanted to reinforce the shared belief that an ongoing partnership between labor and management is essential to the long-term success and growth of the industry. The results of some of the issues that were addressed include: employment has increased from 281 union employees to 332 employees; production increased from 3.1 million tons to 4.1 million tons; cost per ton was lowered over $5.00 per ton in the last two years; accidents have been reduced by 50 percent; the process has increased sales and helped develop new sales; and they have been able to improve attitudes among employees.

  6. Development of mine explosion ground truth smart sensors

    SciTech Connect (OSTI)

    Taylor, Steven R.; Harben, Phillip E.; Jarpe, Steve; Harris, David B.

    2015-09-14

    Accurate seismo-acoustic source location is one of the fundamental aspects of nuclear explosion monitoring. Critical to improved location is the compilation of ground truth data sets for which origin time and location are accurately known. Substantial effort by the National Laboratories and other seismic monitoring groups have been undertaken to acquire and develop ground truth catalogs that form the basis of location efforts (e.g. Sweeney, 1998; Bergmann et al., 2009; Waldhauser and Richards, 2004). In particular, more GT1 (Ground Truth 1 km) events are required to improve three-dimensional velocity models that are currently under development. Mine seismicity can form the basis of accurate ground truth datasets. Although the location of mining explosions can often be accurately determined using array methods (e.g. Harris, 1991) and from overhead observations (e.g. MacCarthy et al., 2008), accurate origin time estimation can be difficult. Occasionally, mine operators will share shot time, location, explosion size and even shot configuration, but this is rarely done, especially in foreign countries. Additionally, shot times provided by mine operators are often inaccurate. An inexpensive, ground truth event detector that could be mailed to a contact, placed in close proximity (< 5 km) to mining regions or earthquake aftershock regions that automatically transmits back ground-truth parameters, would greatly aid in development of ground truth datasets that could be used to improve nuclear explosion monitoring capabilities. We are developing an inexpensive, compact, lightweight smart sensor unit (or units) that could be used in the development of ground truth datasets for the purpose of improving nuclear explosion monitoring capabilities. The units must be easy to deploy, be able to operate autonomously for a significant period of time (> 6 months) and inexpensive enough to be discarded after useful operations have expired (although this may not be part of our business

  7. Landfill mining: A critical review of two decades of research

    SciTech Connect (OSTI)

    Krook, Joakim; Svensson, Niclas; Eklund, Mats

    2012-03-15

    Highlights: Black-Right-Pointing-Pointer We analyze two decades of landfill mining research regarding trends and topics. Black-Right-Pointing-Pointer So far landfill mining has mainly been used to solve waste management issues. Black-Right-Pointing-Pointer A new perspective on landfills as resource reservoirs is emerging. Black-Right-Pointing-Pointer The potential of resource extraction from landfills is significant. Black-Right-Pointing-Pointer We outline several key challenges for realization of resource extraction from landfills. - Abstract: Landfills have historically been seen as the ultimate solution for storing waste at minimum cost. It is now a well-known fact that such deposits have related implications such as long-term methane emissions, local pollution concerns, settling issues and limitations on urban development. Landfill mining has been suggested as a strategy to address such problems, and in principle means the excavation, processing, treatment and/or recycling of deposited materials. This study involves a literature review on landfill mining covering a meta-analysis of the main trends, objectives, topics and findings in 39 research papers published during the period 1988-2008. The results show that, so far, landfill mining has primarily been seen as a way to solve traditional management issues related to landfills such as lack of landfill space and local pollution concerns. Although most initiatives have involved some recovery of deposited resources, mainly cover soil and in some cases waste fuel, recycling efforts have often been largely secondary. Typically, simple soil excavation and screening equipment have therefore been applied, often demonstrating moderate performance in obtaining marketable recyclables. Several worldwide changes and recent research findings indicate the emergence of a new perspective on landfills as reservoirs for resource extraction. Although the potential of this approach appears significant, it is argued that

  8. Taxation of expenditures required by the Surface Mining Control and Reclamation Act of 1977 (SMCRA)

    SciTech Connect (OSTI)

    McNally, K.J.

    1987-01-01

    There has been disagreement over whether the expenditures made by the mine operator to comply with the Surface Mining Control and Reclamation Act of 1977 are characterized as capital or deductible expenses. An examination of expenditures made by mine operators during the life of a mine illustrates the dichotomy between deductible and capital expenditures in which special rules may override general capitalization rules to allow the mine operator to deduct a capital expenditure. This makes some expenditures difficult to categorize. Citing case law, the author treats expenditures for exploration and mining permits, performance bonds, and liability insurance. A new provision, section 468, allowing the current deduction for future reclamation and closing costs removed the uncertainty created by prior case law.

  9. Injury experience in nonmetallic mineral mining (Except stone and coal), 1990

    SciTech Connect (OSTI)

    Not Available

    1991-12-31

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of nonmetallic mineral mining (except stone and coal) in the United States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  10. Injury experience in nonmetallic mineral mining (except stone and coal), 1991

    SciTech Connect (OSTI)

    Not Available

    1993-10-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of nonmetallic mineral mining (except stone and coal) in the United States for 1991. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  11. Injury experience in nonmetallic mineral mining (except stone and coal), 1992

    SciTech Connect (OSTI)

    Reich, R.B; Hugler, E.C.

    1994-05-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of nonmetallic mineral mining (except stone and coal) in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report.

  12. Injury experience in nonmetallic mineral mining (except stone and coal), 1989

    SciTech Connect (OSTI)

    Not Available

    1990-01-01

    This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of nonmetallic mineral mining (except stone and coal) in the United States for 1989. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison with other metal and nonmetallic mineral mining industries and with coal mining, summary reference tabulations are included at the end of both the operator and the contractor sections of this report. 3 figs., 46 tabs.

  13. Stability analysis of a backfilled room-and-pillar mine. Report of investigations/1995

    SciTech Connect (OSTI)

    Tesarik, D.R.; Seymour, J.B.; Yanske, T.R.; McKibbin, R.W.

    1995-03-01

    Displacement and stress changes in cemented backfill and ore pillars at the Buick Mine, near Boss, MO, were monitored by engineers from the U.S. Bureau of Mines (USBM) and The Doe Run Co., St Louis, MO. A test area in this room-and-pillar mine was backfilled to provide support when remnant ore pillars were mined. Objectives of this research were to evaluate the effect of backfill on mine stability, observe backfill conditions during pillar removal, and calibrate a numeric model to be used to design other areas of the mine. Two-dimensional, finite-element and three-dimensional, displacement-discontinuity codes were used to model the study area. Combined with instrument data, these codes identified two failed pillars.

  14. DEVELOPMENT AND DEMONSTRATION OF A PILOT SCALE FACILITY FOR FABRICATION AND MARKETING OF LIGHTWEIGHT-COAL COMBUSTION BYPRODUCTS-BASED SUPPORTS AND MINE VENTILATION BLOCKS FOR UNDERGROUND MINES

    SciTech Connect (OSTI)

    Yoginder P. Chugh

    2002-10-01

    The overall goal of this program was to develop a pilot scale facility, and design, fabricate, and market CCBs-based lightweight blocks for mine ventilation control devices, and engineered crib elements and posts for use as artificial supports in underground mines to replace similar wooden elements. This specific project was undertaken to (1) design a pilot scale facility to develop and demonstrate commercial production techniques, and (2) provide technical and marketing support to Fly Lite, Inc to operate the pilot scale facility. Fly Lite, Inc is a joint venture company of the three industrial cooperators who were involved in research into the development of CCBs-based structural materials. The Fly-Lite pilot scale facility is located in McLeansboro, Illinois. Lightweight blocks for use in ventilation stoppings in underground mines have been successfully produced and marketed by the pilot-scale facility. To date, over 16,000 lightweight blocks (30-40 pcf) have been sold to the mining industry. Additionally, a smaller width (6-inch) full-density block was developed in August-September 2002 at the request of a mining company. An application has been submitted to Mine Safety and Health Administration for the developed block approval for use in mines. Commercialization of cribs and posts has also been accomplished. Two generations of cribs have been developed and demonstrated in the field. MSHA designated them suitable for use in mines. To date, over 2,000 crib elements have been sold to mines in Illinois. Two generations of posts were also demonstrated in the field and designated as suitable for use in mines by MSHA. Negotiations are currently underway with a mine in Illinois to market about 1,000 posts per year based on a field demonstration in their mine. It is estimated that 4-5 million tons CCBs (F-fly ash or FBC fly ash) may be utilized if the developed products can be commercially implemented in U.S. coal and non-coal mines.

  15. GIS-technologies for integrated assessment of the productive mining areas

    SciTech Connect (OSTI)

    Zamaraev, R.Y.; Oparin, V.N.; Popov, S.E.; Potapov, V.P.; Pyastunovich,O.L.

    2008-05-15

    The paper describes the bases of a new application of GIS-technologies for integrated assessment and comparison of the productive mining areas, involving a wide range of mining and technological factors, considering mineral properties, mineral occurrence conditions and geographical advantages of a mineral deposit location. The model capabilities are exemplified by a comparison of technological characteristics of coals, transportation and power supply infrastructure of the productive mining areas at the Kuznetsk Coal Basin.

  16. Woody vegetation and succession on the Fonde surface mine demonstration area, Bell County, Kentucky

    SciTech Connect (OSTI)

    Wade, G.L.; Thompson, R.L.

    1999-07-01

    The long term impact of surface mining on vegetation and plant succession has always been of concern to environmentalists and residents of Appalachia. The Fonde Surface Mine Demonstration Area is a 7.3-ha, NE-NW-aspect contour coal mine at an elevation of 562 m. It was reclaimed in 1965 to show state-of-the-art surface mine reclamation techniques consistent with then-current law and regulations after coal mining in 1959 and 1963. The mine spoils were lightly graded to control erosion and crates a bench with water control and two sediment ponds. Soil pH ranged from 2.8 to 5.9. About 80 percent of the mine was planted with 18 tree and shrub species including plantations of mixed pine, mixed hardwoods, black locust, and shrubs for wildlife. In a complete floristic inventory conducted 25 years later, the authors found the woody flora consisted of 34 families, 53 genera, and 70 species including 7 exotics. This inventory of the Fonde mine shows that a diverse forest vegetation can be reestablished after extreme disturbances in Appalachia. Black locust, yellow poplar, and Virginia pine reproduction varied significantly among plantation types. Canopy tree species significantly affected ground layer cover, total species richness, number of tree seedling species, and total number of tree seedlings present. Mine soil type affected ground layer percent cover and total species richness. Pre-SMCRA (Surface Mining Control and Reclamation Act of 1977) reclaimed and inventoried mines can be used to evaluate biodiversity on post-SMCRA mines.

  17. The siting of a prison complex above an abandoned underground coal mine

    SciTech Connect (OSTI)

    Marino, G.G.

    1997-12-31

    This paper discusses in detail the process undertaken to mitigate the effects of any future mine subsidence on prison structures proposed above old abandoned underground workings. The site for a proposed prison complex purchased by the State of Indiana was located in west-central Indiana and was undermined by an old abandoned room and pillar mine. The original plan for construction consisted of one phase. Based on a study of the mine map and subsurface verification of the extent of mining it was determined that all prison buildings and important structures could be placed above solid coal to the north. One masonry building, however, was located within the potential draw zone of mine works which still contained significant mine voids. Based on empirical data the subsidence potential was estimated and the building was accordingly designed to be mine subsidence resistant. It was decided that a phase two prison complex should be constructed adjacent to and just south of the Phase I complex. This complex would be directly above the underground workings. The first stage of design was to minimize subsidence potential by positioning the exposure of significant structures to the subjacent mining assuming the mine map was sufficiently accurate. Subsequently, an extensive subsurface investigation program was then undertaken to: (1) ascertain whether or not mine areas where buildings would be located were already collapsed and thus only nominal, if any, subsidence could occur in the future; and (2) verify the presence of solid coal areas within the mine as indicated on the mine map. Based on all the site information gathered subsidence profiles were developed from an empirical data base of subsidence events in the Illinois Coal Basin. As a result of this work many structures on the site required no or nominal subsidence considerations.

  18. State-of-the-art techniques for backfilling abandoned mine voids. Information circular/1993

    SciTech Connect (OSTI)

    Walker, J.S.

    1993-01-01

    Abandoned underground mine openings are susceptible to collapse because of the mining methods used, the character of the overburden, and the typically large wide entries with minimal roof support. The final effect of the collapse of the underground workings is surface subsidence. To reduce the probability of subsidence, methods to backfill the mine void with various types of materials have been developed. The paper describes the available technologies for subsidence abatement and discusses their operation and application.

  19. Injury experience in nonmetallic mineral mining (except stone and coal), 1984

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    This report reviews in detail the occupational injury and illness experience of nonmetallic mineral mining (except stone and coal) in the United States for 1984. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and principal type of mineral. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report.

  20. Measurement and modeling of transfer functions for lightning coupling into the Sago mine.

    SciTech Connect (OSTI)

    Morris, Marvin E.; Higgins, Matthew B.

    2007-04-01

    This report documents measurements and analytical modeling of electromagnetic transfer functions to quantify the ability of cloud-to-ground lightning strokes (including horizontal arc-channel components) to couple electromagnetic energy into the Sago mine located near Buckhannon, WV. Two coupling mechanisms were measured: direct and indirect drive. These transfer functions are then used to predict electric fields within the mine and induced voltages on conductors that were left abandoned in the sealed area of the Sago mine.

  1. Conversion of Coal Mine Gas to LNG (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    obtaining rights to coal mine methane with a number of coal companies, explored marketing potential with a wide variety of customers in many sections of the United States, ...

  2. Setting the course for the Surface Mining Control and Reclamation Act of 1977

    SciTech Connect (OSTI)

    Beck, R.E.

    1995-12-31

    The Surface Mining Control and Reclamation Act of 1977 focuses on ensuring reclamation of the land after mining by restoring land affected to a condition capable of supporting prior uses and sets up a program for reclaiming abandoned mined land to be financed by a tax on coal produced. This article discusses the landmark legal decisions which represent major efforts to limit the federal role in the Surface Mining Control and Reclamation Act of 1977 through the Commerce Clause, the Tenth Amendment, and statutory interpretation.

  3. State-of-the-art techniques for backfilling abandoned mine voids

    SciTech Connect (OSTI)

    Walker, J.S. )

    1993-01-01

    Abandoned underground mine openings are susceptible to collapse because of the mining methods used, the character of the overburden, and the typically large, wide entries with minimal roof support. The final effect of the collapse of the underground workings is surface subsidence. To reduce the probability of subsidence, methods to backfill the mine void with various types of materials have been developed. This US Bureau of Mines report describes the available technologies for subsidence abatement and discusses their operation and application. The basis of these abatement methods is the replacement of the mined material with mine waste. Backfilling of mine voids is the most common method of stabilization used to abate subsidence and protect surface structures. Hydraulic flushing and grouting, using remote methods from single or multiple boreholes, are the most often-used methods for the placement of backfill material. Other subsidence abatement techniques are available and may be more appropriate under different conditions. These other techniques include pneumatic stowing, either by in-mine or remote methods, and various point support methods that do not completely fill the mine void and are used for the protection of small areas of the land surface and surface structures. 21 refs., 14 figs.

  4. 1984 Virginia coal mine directory: producers of 100,000 tons or more

    SciTech Connect (OSTI)

    Hibbard, W.R. Jr.

    1985-01-01

    The purpose of this directory is to identify major Virginia coal sources for the use of prospective buyers and other interested parties. It is divided into lists: (1) 1984 Virginia coal production, (2) eighty-five largest companies identified by MSHA, (3) alphabetical listing of Virginia coal mines, (4) alphabetical listing of coal mines by county, and (5) coal mines rated by production figures. The rating order for the last list includes factors affecting productivity such as type of mine, number of injuries, seam thickness, total production, and average employment.

  5. Regional coal-mining employment in the United States from 1985 to 2000

    SciTech Connect (OSTI)

    Reed, J.D.; Hoag, J.H.

    1984-07-01

    Mining employment projections for 15 coal-producing regions in the US indicate that substantial regional reallocation of employment will occur over the time frame considered. The East and Midwest are expected to be net losers of employment, while a major portion of the Appalachian coal region and the West will show considerable growth. Further analysis to separate the percentage of change in employment into the components of change show major dislocations in the coal-mining industry. Historically, mining employment response to such dislocation has been sluggish. If major migration of mining employment does not take place, there will be significant unemployment in the East and Midwest. 2 figures, 5 tables.

  6. Electrical installations in oil shale mines. Open file report 21 Sep 81-13 Aug 83

    SciTech Connect (OSTI)

    Gillenwater, B.B.; Kline, R.J.; Paas, N.

    1983-08-01

    This report presents recommended guidelines and regulatory changes applicable to electrical installations in underground oil shale mines. These recommendations are based on information gathered from oil shale operators, government agencies, and other knowledgeable sources familiar with existing plans for mining systems and electrical installations, and on present understanding of the problems and hazards associated with oil shale mining. Additional discussions of specific electrical problems related to oil shale mining include ground fault current levels, permissible electric wheel motors, permissible batteries and electric starting systems, intrinsically safe instrumentation, and applicability of existing test standards.

  7. Expansion of the commercial output of Estonian oil shale mining and processing

    SciTech Connect (OSTI)

    Fraiman, J.; Kuzmiv, I. [Estonian Oil Shale State Co., Jyhvi (Estonia). Scientific Research Center

    1996-09-01

    Economic and ecological preconditions are considered for the transition from monoproduct oil shale mining to polyproduct Estonian oil shale deposits. Underground water, limestone, and underground heat found in oil shale mines with small reserves can be operated for a long time using chambers left after oil shale extraction. The adjacent fields of the closed mines can be connected to the operations of the mines that are still working. Complex usage of natural resources of Estonian oil shale deposits is made possible owing to the unique features of its geology and technology. Oil shale seam development is carried out at shallow depths (40--70 m) in stable limestones and does not require expensive maintenance. Such natural resources as underground water, carbonate rocks, heat of rock mass, and underground chambers are opened by mining and are ready for utilization. Room-and-pillar mining does not disturb the surface, and worked oil shale and greenery waste heaps do not breach its ecology. Technical decisions and economic evaluation are presented for the complex utilization of natural resources in the boundaries of mine take of the ``Tammiku`` underground mine and the adjacent closed mine N2. Ten countries have already experienced industrial utilization of oil shale in small volumes for many years. Usually oil shale deposits are not notable for complex geology of the strata and are not deeply bedded. Thus complex utilization of quite extensive natural resources of Estonian oil shale deposits is of both scientific and practical interest.

  8. OSTIblog Articles in the gold mine Topic | OSTI, US Dept of Energy...

    Office of Scientific and Technical Information (OSTI)

    Here nuclear chemist Ray Davis and his colleagues installed a solar neutrino experiment underground in the mine called the "Homestake Experiment," the large-scale radiochemical ...

  9. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    SciTech Connect (OSTI)

    Mark J. Rigali

    2001-10-01

    Published mechanical and thermal properties data on a variety of materials was gathered, with focus on materials that have potential with respect to developing wear resistant and damage tolerant composite for mining industry applications. Preliminary core materials of interest include but are not limited to: Diamond, Tungsten Carbide and Cemented Tungsten Carbides, Carbides of Boron, Silicon, Titanium and Aluminum, Diboride of Titanium and Aluminum, Nitrides of Aluminum, Silicon, Titanium, and Boron, Aluminum Oxide, Tungsten, Titanium, Iron, Cobalt and Metal Alloys. Preliminary boundary materials of interest include but are not limited to: W metal, WC-Co, W-Co, WFeNi, and Mo metal and alloys. Several FM test coupons were fabricated with various compositions using the above listed materials. These coupons were consolidated to varying degrees by uniaxial hot pressing, then cut and ground to expose the FM cell structure. One promising system, WC-Co core and WFeNi boundary, was consolidated to 97% of theoretical density, and demonstrates excellent hardness. Data on standard mechanical tests was gathered, and tests will begin on the consolidated test coupons during the upcoming reporting period. The program statements of work for ACR Inc. and its subcontractors, as well as the final contract negotiations, were finalized during the current reporting period. The program start date was February 22nd, 2001. In addition to the current subcontractors, Kennametal Inc., a major manufacturer of cutting tools and wear resistant tooling for the mining industry, expressed considerable interest in ACR's Fibrous Monolith composites for both machine and mining applications. At the request of Kennametal, ARC Inc fabricated and delivered several Fibrous Monolith coupons and components for testing and evaluation in the mining and machine tool applications. Additional samples of Diamond/Tungsten Carbide-6%Cobalt Fibrous Monolith were fabricated and delivered for testing Kennametal's Rapid

  10. InterMine Webservices for Phytozome (Rev2)

    SciTech Connect (OSTI)

    Carlson, Joseph; Goodstein, David; Rokhsar, Dan

    2014-07-10

    A datawarehousing framework for information provides a useful infrastructure for providers and users of genomic data. For providers, the infrastructure give them a consistent mechanism for extracting raw data. While for the users, the web services supported by the software allows them to make complex, and often unique, queries of the data. Previously, phytozome.net used BioMart to provide the infrastructure. As the complexity, scale and diversity of the dataset as grown, we decided to implement an InterMine web service on our servers. This change was largely motivated by the ability to have a more complex table structure and richer web reporting mechanism than BioMart. For InterMine to achieve its more complex database schema it requires an XML description of the data and an appropriate loader. Unlimited one-to-many and many-to-many relationship between the tables can be enabled in the schema. We have implemented support for:1.) Genomes and annotations for the data in Phytozome. This set is the 48 organisms currently stored in a back end CHADO datastore. The data loaders are modified versions of the CHADO data adapters from FlyMine. 2.) Interproscan results from all proteins in the Phytozome database. 3.) Clusters of proteins into a grouped heirarchically by similarity. 4.) Cufflinks results from tissue-specific RNA-Seq data of Phytozome organisms. 5.) Diversity data (GATK and SnpEFF results) from a set of individual organism. The last two datatypes are new in this implementation of our web services. We anticipate that the scale of these data will increase considerably in the near future.

  11. Restoration of surface-mined lands with rainfall harvesting

    SciTech Connect (OSTI)

    Sauer, R.H.; Rickard, W.H.

    1982-12-01

    Strip mining for coal in the arid western US will remove grazing land as energy demands are met. Conventional resotration usually includes leveling the spoil banks and covering them with top soil, fertilizing, seeding and irrigation with well or river water. An overview of research on an alternate method of restoring this land is reported. From 1976 through 1981 studies were conducted on the use of water harvesting, the collection and use of rainfall runoff, to restore the vegetative productivity of strip mined lands in arid regions. These studies tested the technical and economic feasibility of using partially leveled spoil banks at strip mines as catchment areas to collect and direct runoff to the topsoiled valley floor where crops were cultivated. Information was collected on the efficiency of seven treatments to increase runoff from the catchment areas and on the productivity of seven crops. The experiments were conducted in arid areas of Washington, Arizona, and Colorado. It was concluded that water harvesting can replace or augment expensive and inadequate supplies of well and river water in arid regions with a suitable climate. These studies showed that some treatments provided adequate runoff to produce a useful crop in the valleys, thus making this alternative approach to restoration technically feasible. This approach was also potentially economically feasible where the treatment costs of the catchment areas were low, the treatment was effective, the crop was productive and valuable, and earthmoving costs were lower than with conventional restoration involving complete leveling of spoil banks. It was also concluded that water harvesting can be made more effective with further information on catchment area treatments, which crops are most adaptable to water harvesting, the optimum incline of the catchment areas and climatic influences on water harvesting.

  12. FIBROUS MONOLITH WEAR RESISTANT COMPONENTS FOR THE MINING INDUSTRY

    SciTech Connect (OSTI)

    Mike L. Fulcher; Kenneth L. Knittel

    2004-06-08

    The work performed on this program was to develop wear resistant, tough FM composite materials with efforts focused on WC-Co based FM systems. The materials were developed for use in mining industry wear applications. Components of interest were drill bit inserts for drilling blast holes. Other component applications investigated included wear plates for a variety of equipment such as pit shovels, wear surfaces for conveyors, milling media for ball milling operations, hydrocyclone cones, grader blades and dozer teeth. Cross-cutting technologies investigated included hot metal extrusion dies, drill bits for circuit board fabrication, cutting tools for cast iron and aluminum machining. An important part of the work was identification of the standard materials used in drilling applications. A materials trade study to determine those metals and ceramics used for mining applications provided guidance for the most important materials to be investigated. WC-Co and diamond combinations were shown to have the most desirable properties. Other considerations such as fabrication technique and the ability to consolidate shifted the focus away from diamond materials and toward WC-Co. Cooperating partners such as Kennametal and Kyocera assisted with supplies, evaluations of material systems, fabricated parts and suggestions for cross-cutting technology applications for FM architectures. Kennametal provided the raw materials (WC-Co and Al-TiCN powders) for the extent of the material evaluations. Kyocera shared their research into various FM systems and provided laboratory testing of fabricated materials. Field testing provided by partners Superior Rock Bit and Brady Mining and Construction provided insight into the performance of the fabricated materials under actual operational conditions. Additional field testing of cross-cutting technology, the extrusion of hot metals, at Extruded Metals showed the potential for additional market development.

  13. ADVANCED UNDERGROUND GAS STORAGE CONCEPTS REFRIGERATED-MINED CAVERN STORAGE

    SciTech Connect (OSTI)

    1998-09-01

    Limited demand and high cost has prevented the construction of hard rock caverns in this country for a number of years. The storage of natural gas in mined caverns may prove technically feasible if the geology of the targeted market area is suitable; and economically feasible if the cost and convenience of service is competitive with alternative available storage methods for peak supply requirements. It is believed that mined cavern storage can provide the advantages of high delivery rates and multiple fill-withdrawal cycles in areas where salt cavern storage is not possible. In this research project, PB-KBB merged advanced mining technologies and gas refrigeration techniques to develop conceptual designs and cost estimates to demonstrate the commercialization potential of the storage of refrigerated natural gas in hard rock caverns. Five regions of the U.S.A. were studied for underground storage development and PB-KBB reviewed the literature to determine if the geology of these regions was suitable for siting hard rock storage caverns. Area gas market conditions in these regions were also studied to determine the need for such storage. Based on an analysis of many factors, a possible site was determined to be in Howard and Montgomery Counties, Maryland. The area has compatible geology and a gas industry infrastructure for the nearby market populous of Baltimore and Washington D.C.. As Gas temperature is lowered, the compressibility of the gas reaches an optimum value. The compressibility of the gas, and the resultant gas density, is a function of temperature and pressure. This relationship can be used to commercial advantage by reducing the size of a storage cavern for a given working volume of natural gas. This study looks at this relationship and and the potential for commercialization of the process in a storage application. A conceptual process design, and cavern design were developed for various operating conditions. Potential site locations were considered

  14. Rapid extinguishing of sponcom fires in underground mines

    SciTech Connect (OSTI)

    Kajdasz, Z.; Zieba, G.

    1999-07-01

    The main purpose presented in this paper is to present active and passive methods to fight a sponcom fire. The active method uses an inert gas generator called the GAG while the passive method is through the use of ventilation software. In most sponcom situations a combination of these two methods results in rapid extinguishing of the overheated areas. The presented software allows for accurate and real time analysis of the ventilation network. Application of the GAG has been proven on many occasions as an effective means of producing large volumes of inert mine atmospheres with which to fight fires.

  15. Explosive fluid transmitted shock method for mining deeply buried coal

    DOE Patents [OSTI]

    Archibald, Paul B.

    1976-06-22

    A method for recovering coal from deeply buried deposits comprising drilling a hole down into a coal seam, filling the hole with water, and periodically detonating an explosive charge at the bottom of the water-filled hole. The water transmits the explosive shock wave to the face of the coal seam, thereby fracturing and dislodging the coal. The resulting suspension of loose coal in water is then pumped to the surface where the coal is recovered and the water is recycled to the mining operation.

  16. EECBG Success Story: After 105 Years, Historic City Hall in West Des Moines, Iowa Goes Green

    Broader source: Energy.gov [DOE]

    The city of West Des Moines, Iowa is used funding to renovate the Historic City Hall building located in Valley Junction, including the installation of four geothermal heating wells, a rooftop covered with vegetation, solar panels and permeable pavers to allow stormwater through to the soil below. Learn more.

  17. Proceedings of the international land reclamation and mine drainage conference and third international conference on the abatement of acidic drainage. Volume 4: Abandoned mine lands and topical issues -- SP 06D-94

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    Volume 4 of these proceedings is divided into the following sections: Subsidence--Reclamation, characterization (6 papers); Subsidence--Structural response (7); Abandoned mine land studies (6); Mine Hydrology--Topical issues (4); Mine waste--Topical issues (6); Policy issues (6); Miscellaneous poster session (14); and Abstracts (17). 53 papers dealing with or applicable to coal mining have been processed separately for inclusion on the data base.

  18. DES13S2cmm: The first superluminous supernova from the Dark Energy Survey

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Papadopoulos, A.; Plazas, A. A.; D"Andrea, C. B.; Sullivan, M.; Nichol, R. C.; Barbary, K.; Biswas, R.; Brown, P. J.; Covarrubias, R. A.; Finley, D. A.; et al

    2015-03-23

    We present DES13S2cmm, the first spectroscopically-confirmed superluminous supernova (SLSN) from the Dark Energy Survey (DES). We briefly discuss the data and search algorithm used to find this event in the first year of DES operations, and outline the spectroscopic data obtained from the European Southern Observatory (ESO) Very Large Telescope to confirm its redshift (z = 0.663 ± 0.001 based on the host-galaxy emission lines) and likely spectral type (type I). Using this redshift, we find MpeakU = –21.05+0.10–0.09 for the peak, rest-frame U-band absolute magnitude, and find DES13S2cmm to be located in a faint, low-metallicity (sub-solar), low stellar-mass hostmore » galaxy (log(M/M⊙) = 9.3 ± 0.3), consistent with what is seen for other SLSNe-I. We compare the bolometric light curve of DES13S2cmm to fourteen similarly well-observed SLSNe-I in the literature and find it possesses one of the slowest declining tails (beyond +30 days rest frame past peak), and is the faintest at peak. Moreover, we find the bolometric light curves of all SLSNe-I studied herein possess a dispersion of only 0.2–0.3 magnitudes between +25 and +30 days after peak (rest frame) depending on redshift range studied; this could be important for ‘standardising’ such supernovae, as is done with the more common type Ia. We fit the bolometric light curve of DES13S2cmm with two competing models for SLSNe-I – the radioactive decay of ⁵⁶Ni, and a magnetar – and find that while the magnetar is formally a better fit, neither model provides a compelling match to the data. Although we are unable to conclusively differentiate between these two physical models for this particular SLSN-I, further DES observations of more SLSNe-I should break this degeneracy, especially if the light curves of SLSNe-I can be observed beyond 100 days in the rest frame of the supernova.« less

  19. DES13S2cmm: The first superluminous supernova from the Dark Energy Survey

    SciTech Connect (OSTI)

    Papadopoulos, A.; Plazas, A. A.; D"Andrea, C. B.; Sullivan, M.; Nichol, R. C.; Barbary, K.; Biswas, R.; Brown, P. J.; Covarrubias, R. A.; Finley, D. A.; Fischer, J. A.; Foley, R. J.; Goldstein, D.; Gupta, R. R.; Kessler, R.; Kovacs, E.; Kuhlmann, S. E.; Lidman, C.; March, M.; Nugent, P. E.; Sako, M.; Smith, R. C.; Spinka, H.; Wester, W.; Abbott, T. M. C.; Abdalla, F.; Allam, S. S.; Banerji, M.; Bernstein, J. P.; Bernstein, R. A.; Carnero, A.; da Costa, L. N.; DePoy, D. L.; Desai, S.; Diehl, H. T.; Eifler, T.; Evrard, A. E.; Flaugher, B.; Frieman, J. A.; Gerdes, D.; Gruen, D.; Honscheid, K.; James, D.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Maia, M. A. G.; Makler, M.; Marshall, J. L.; Merritt, K. W.; Miller, C. J.; Miquel, R.; Ogando, R.; Roe, N. A.; Romer, A. K.; Rykoff, E.; Sanchez, E.; Santiago, B. X.; Scarpine, V.; Schubnell, M.; Sevilla, I.; Soares-Santos, M.; Suchyta, E.; Swanson, M.; Tarle, G.; Thaler, J.; Tucker, L. D.; Wechsler, R. H.; Zuntz, J.

    2015-03-23

    We present DES13S2cmm, the first spectroscopically-confirmed superluminous supernova (SLSN) from the Dark Energy Survey (DES). We briefly discuss the data and search algorithm used to find this event in the first year of DES operations, and outline the spectroscopic data obtained from the European Southern Observatory (ESO) Very Large Telescope to confirm its redshift (z = 0.663 ± 0.001 based on the host-galaxy emission lines) and likely spectral type (type I). Using this redshift, we find MpeakU = –21.05+0.10–0.09 for the peak, rest-frame U-band absolute magnitude, and find DES13S2cmm to be located in a faint, low-metallicity (sub-solar), low stellar-mass host galaxy (log(M/M⊙) = 9.3 ± 0.3), consistent with what is seen for other SLSNe-I. We compare the bolometric light curve of DES13S2cmm to fourteen similarly well-observed SLSNe-I in the literature and find it possesses one of the slowest declining tails (beyond +30 days rest frame past peak), and is the faintest at peak. Moreover, we find the bolometric light curves of all SLSNe-I studied herein possess a dispersion of only 0.2–0.3 magnitudes between +25 and +30 days after peak (rest frame) depending on redshift range studied; this could be important for ‘standardising’ such supernovae, as is done with the more common type Ia. We fit the bolometric light curve of DES13S2cmm with two competing models for SLSNe-I – the radioactive decay of ⁵⁶Ni, and a magnetar – and find that while the magnetar is formally a better fit, neither model provides a compelling match to the data. Although we are unable to conclusively differentiate between these two physical models for this particular SLSN-I, further DES observations of more SLSNe-I should break this degeneracy, especially if the light curves of SLSNe-I can be observed beyond 100 days in the rest frame of the supernova.

  20. DES13S2cmm: The first superluminous supernova from the dark energy survey

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Papadopoulos, A.; D'Andrea, C. B.; Sullivan, M.; Nichol, R. C.; Barbary, K.; Biswas, R.; Brown, P. J.; Covarrubias, R. A.; Finley, D. A.; Fischer, J. A.; et al

    2015-03-23

    We present DES13S2cmm, the first spectroscopically-confirmed superluminous supernova (SLSN) from the Dark Energy Survey (DES). We briefly discuss the data and search algorithm used to find this event in the first year of DES operations, and outline the spectroscopic data obtained from the European Southern Observatory (ESO) Very Large Telescope to confirm its redshift (z = 0.663 0.001 based on the host-galaxy emission lines) and likely spectral type (type I). Using this redshift, we find MUpeak = -21.05????-0.09 for the peak, rest-frame U-band absolute magnitude, and find DES13S2cmm to be located in a faint, low metallicity (sub-solar), low stellar-massmorehost galaxy (log(M/M_sun) = 9.3 0.3); consistent with what is seen for other SLSNe-I. We compare the bolometric light curve of DES13S2cmm to fourteen similarly well-observed SLSNe-I in the literature and find it possesses one of the slowest declining tails (beyond +30 days rest frame past peak), and is the faintest at peak. Moreover, we find the bolometric light curves of all SLSNe-I studied herein possess a dispersion of only 0.2-0.3 magnitudes between +25 and +30 days after peak (rest frame) depending on redshift range studied; this could be important for 'standardising' such supernovae, as is done with the more common type Ia. We fit the bolometric light curve of DES13S2cmm with two competing models for SLSNe-I - the radioactive decay of ??Ni, and a magnetar - and find that while the magnetar is formally a better fit, neither model provides a compelling match to the data. Although we are unable to conclusively differentiate between these two physical models for this particular SLSN-I, further DES observations of more SLSNe-I should break this degeneracy, especially if the light curves of SLSNe-I can be observed beyond 100 days in the rest frame of the supernova.less

  1. DES13S2cmm: The first superluminous supernova from the Dark Energy Survey

    SciTech Connect (OSTI)

    Papadopoulos, A.; Plazas, A. A.; D"Andrea, C. B.; Sullivan, M.; Nichol, R. C.; Barbary, K.; Biswas, R.; Brown, P. J.; Covarrubias, R. A.; Finley, D. A.; Fischer, J. A.; Foley, R. J.; Goldstein, D.; Gupta, R. R.; Kessler, R.; Kovacs, E.; Kuhlmann, S. E.; Lidman, C.; March, M.; Nugent, P. E.; Sako, M.; Smith, R. C.; Spinka, H.; Wester, W.; Abbott, T. M. C.; Abdalla, F.; Allam, S. S.; Banerji, M.; Bernstein, J. P.; Bernstein, R. A.; Carnero, A.; da Costa, L. N.; DePoy, D. L.; Desai, S.; Diehl, H. T.; Eifler, T.; Evrard, A. E.; Flaugher, B.; Frieman, J. A.; Gerdes, D.; Gruen, D.; Honscheid, K.; James, D.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Maia, M. A. G.; Makler, M.; Marshall, J. L.; Merritt, K. W.; Miller, C. J.; Miquel, R.; Ogando, R.; Roe, N. A.; Romer, A. K.; Rykoff, E.; Sanchez, E.; Santiago, B. X.; Scarpine, V.; Schubnell, M.; Sevilla, I.; Soares-Santos, M.; Suchyta, E.; Swanson, M.; Tarle, G.; Thaler, J.; Tucker, L. D.; Wechsler, R. H.; Zuntz, J.

    2015-03-23

    We present DES13S2cmm, the first spectroscopically-confirmed superluminous supernova (SLSN) from the Dark Energy Survey (DES). We briefly discuss the data and search algorithm used to find this event in the first year of DES operations, and outline the spectroscopic data obtained from the European Southern Observatory (ESO) Very Large Telescope to confirm its redshift (z = 0.663 0.001 based on the host-galaxy emission lines) and likely spectral type (type I). Using this redshift, we find MpeakU = 21.05+0.100.09 for the peak, rest-frame U-band absolute magnitude, and find DES13S2cmm to be located in a faint, low-metallicity (sub-solar), low stellar-mass host galaxy (log(M/M?) = 9.3 0.3), consistent with what is seen for other SLSNe-I. We compare the bolometric light curve of DES13S2cmm to fourteen similarly well-observed SLSNe-I in the literature and find it possesses one of the slowest declining tails (beyond +30 days rest frame past peak), and is the faintest at peak. Moreover, we find the bolometric light curves of all SLSNe-I studied herein possess a dispersion of only 0.20.3 magnitudes between +25 and +30 days after peak (rest frame) depending on redshift range studied; this could be important for standardising such supernovae, as is done with the more common type Ia. We fit the bolometric light curve of DES13S2cmm with two competing models for SLSNe-I the radioactive decay of ??Ni, and a magnetar and find that while the magnetar is formally a better fit, neither model provides a compelling match to the data. Although we are unable to conclusively differentiate between these two physical models for this particular SLSN-I, further DES observations of more SLSNe-I should break this degeneracy, especially if the light curves of SLSNe-I can be observed beyond 100 days in the rest frame of the supernova.

  2. Treatment and prevention systems for acid mine drainage and halogenated contaminants

    DOE Patents [OSTI]

    Jin, Song; Fallgren, Paul H.; Morris, Jeffrey M.

    2012-01-31

    Embodiments include treatments for acid mine drainage generation sources (10 perhaps by injection of at least one substrate (11) and biologically constructing a protective biofilm (13) on acid mine drainage generation source materials (14). Further embodiments include treatments for degradation of contaminated water environments (17) with substrates such as returned milk and the like.

  3. Coal mine wastes. (Latest citations from the NTIS database). Published Search

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    The bibliography contains citations concerning the characterization, environmental aspects, and engineering studies of coal mining refuse. Topics include disposal strategies, materials usage, and revegetation and reclamation programs. Appropriate legislation, and surveys performed at specific mining sites are also presented. Water pollution aspects of coal wastes are not covered in this report. (Contains 250 citations and includes a subject term index and title list.)

  4. Coal mine wastes. (Latest citations from the Selected Water Resources Abstracts database). Published Search

    SciTech Connect (OSTI)

    Not Available

    1994-05-01

    The bibliography contains citations concerning coal mining wastes, refuse dumps, and spoil. The disposal, environmental impact, waste treatment, utilization, and pollution control of these wastes are discussed. The revegetation of mined lands using waste water sludge is also considered. (Contains a minimum of 138 citations and includes a subject term index and title list.)

  5. Impact of federal regulations on the small coal mine in Appalachia. Final report

    SciTech Connect (OSTI)

    Davis, B.; Ferrell, R.

    1980-11-01

    This report contains the results of a study of the total costs of compliance with federal regulations of coal mines in Eastern Kentucky. The mines were stratified by tonnage per year and employment. Mail and personal interview surveys were conducted for each stratum. Survey results attempt to suggest the competitive position of small concerns and to form a basis for necessary modifications in regulations.

  6. WIPP Employee Inducted Into Mine Rescue Hall of Fame- WIPP Teams Recognized at National Competition

    Broader source: Energy.gov [DOE]

    CARLSBAD, N.M., August 2, 2013 - Long-time Waste Isolation Pilot Plant (WIPP) employee Gary Kessler was inducted into the Metal/Non-Metal National Mine Rescue Hall of Fame on Aug. 1, 2013 at the biennial mine rescue competition in Reno, Nevada.

  7. S. 3168: A Bill to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. Introduced in the Senate of the United States, August 11, 1992

    SciTech Connect (OSTI)

    Not Available

    1992-01-01

    This Act may be cited as the [open quotes]Acid Mine Drainage Abatement Act of 192[close quotes]. The purpose of this bill is to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. The proposed amendments are listed.

  8. Redshift Distributions of Galaxies in the DES Science Verification Shear Catalogue and Implications for Weak Lensing

    SciTech Connect (OSTI)

    Bonnett, C.

    2015-07-21

    We present photometric redshift estimates for galaxies used in the weak lensing analysis of the Dark Energy Survey Science Verification (DES SV) data. Four model- or machine learning-based photometric redshift methods { annz2, bpz calibrated against BCC-U fig simulations, skynet, and tpz { are analysed. For training, calibration, and testing of these methods, we also construct a catalogue of spectroscopically confirmed galaxies matched against DES SV data. The performance of the methods is evalu-ated against the matched spectroscopic catalogue, focusing on metrics relevant for weak lensing analyses, with additional validation against COSMOS photo-zs. From the galaxies in the DES SV shear catalogue, which have mean redshift 0.72 0.01 over the range 0:3 < z < 1:3, we construct three tomographic bins with means of z = {0.45; 0.67,1.00g}. These bins each have systematic uncertainties ?z ? 0.05 in the mean of the fiducial skynet photo-z n(z). We propagate the errors in the redshift distributions through to their impact on cosmological parameters estimated with cosmic shear, and find that they cause shifts in the value of ?8 of approx. 3%. This shift is within the one sigma statistical errors on ?8 for the DES SV shear catalog. We also found that further study of the potential impact of systematic differences on the critical surface density, ?crit, contained levels of bias safely less than the statistical power of DES SV data. We recommend a final Gaussian prior for the photo-z bias in the mean of n(z) of width 0:05 for each of the three tomographic bins, and show that this is a sufficient bias model for the corresponding cosmology analysis.

  9. Data mining of space heating system performance in affordable housing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ren, Xiaoxin; Yan, Da; Hong, Tianzhen

    2015-02-16

    The space heating in residential buildings accounts for a considerable amount of the primary energy use. Therefore, understanding the operation and performance of space heating systems becomes crucial in improving occupant comfort while reducing energy use. This study investigated the behavior of occupants adjusting their thermostat settings and heating system operations in a 62-unit affordable housing complex in Revere, Massachusetts, USA. The data mining methods, including clustering approach and decision trees, were used to ascertain occupant behavior patterns. Data tabulating ON/OFF space heating states was assessed, to provide a better understanding of the intermittent operation of space heating systems inmore » terms of system cycling frequency and the duration of each operation. The decision tree was used to verify the link between room temperature settings, house and heating system characteristics and the heating energy use. The results suggest that the majority of apartments show fairly constant room temperature profiles with limited variations during a day or between weekday and weekend. Data clustering results revealed six typical patterns of room temperature profiles during the heating season. Space heating systems cycled more frequently than anticipated due to a tight range of room thermostat settings and potentially oversized heating capacities. In conclusion, from this study affirm data mining techniques are an effective method to analyze large datasets and extract hidden patterns to inform design and improve operations.« less

  10. Mining machine with cutter drums and sensing apparatus

    SciTech Connect (OSTI)

    Borowski, K.

    1980-02-19

    A drum cutter for a mining machine includes spaced-apart pick elements projecting radially therefrom and a disc forming part of a sensing apparatus disposed to follow a preceding one of the pick elements through rotational movement of the drum cutter. A disc is mounted by a pivot pin extending generally parallel with the rotational axis of the drum cutter. A sensor responds to the radial loading on the disc and produces a signal delivered to a controller for an actuator coupled to a pivot arm carrying the drum cutter. The disc is mounted to project radially about 10-20 millimeters beyond the radially-projected distance by a pick element. The sensor is a strain gage, a piezoelectric gage, an induction gage, a capacitive gage or a load cell. The sensor may be mounted within a hydraulically-power piston and cylinder assembly forming the actuator for the pivot arm. When a load cell is used, it filters out and detects pressure variations at peak magnitudes occurring as the disc penetrates the mine face with a rhythmic rotation for producing corresponding electric signals that are delivered to the controller for the pivot arm.

  11. Occupancy schedules learning process through a data mining framework

    SciTech Connect (OSTI)

    D'Oca, Simona; Hong, Tianzhen

    2014-12-17

    Building occupancy is a paramount factor in building energy simulations. Specifically, lighting, plug loads, HVAC equipment utilization, fresh air requirements and internal heat gain or loss greatly depends on the level of occupancy within a building. Developing the appropriate methodologies to describe and reproduce the intricate network responsible for human-building interactions are needed. Extrapolation of patterns from big data streams is a powerful analysis technique which will allow for a better understanding of energy usage in buildings. A three-step data mining framework is applied to discover occupancy patterns in office spaces. First, a data set of 16 offices with 10 minute interval occupancy data, over a two year period is mined through a decision tree model which predicts the occupancy presence. Then a rule induction algorithm is used to learn a pruned set of rules on the results from the decision tree model. Finally, a cluster analysis is employed in order to obtain consistent patterns of occupancy schedules. Furthermore, the identified occupancy rules and schedules are representative as four archetypal working profiles that can be used as input to current building energy modeling programs, such as EnergyPlus or IDA-ICE, to investigate impact of occupant presence on design, operation and energy use in office buildings.

  12. Mine demonstration of longwall dust control techniques: Final report

    SciTech Connect (OSTI)

    Pothini, B.R.

    1988-07-01

    This report represents the results of in-mine demonstration of three dust control techniques for controlling respirable dust levels on shearer-longwall faces. The techniques were: water infusion, foam spray and reverse shearer drum rotation. The mines in which tests were conducted were in Upper Freeport seam and Pocahontas No. 3 seam. Both gravimetric samplers and GCA RAM-1 real time dust monitors were used for dust surveys. Dust control technology was reviewed, pertinent techniques were selected, equipment was procured and demonstrated as part of the program. The results indicated that water infusion can be readily implemented, foam spray holds promise, but requires more work to be done, and reverse drum rotations effective in select conditions. The tests showed that reversing cutting drum rotation has brought several positive results: (1) lower dust levels; (2) lower methane liberations; (3) improved productivity and (4) less fines. Although the improvements were only in the 10% range, the costs except for the initial change of cutting drums are nil. Therefore this technique should further be tested in soft seams with thick binder rock and also in hard blocky seams. Such investigations may lead to universal application of reverse drum rotation in the industry for beneficial reductions in respirable dust levels at insignificant costs. 13 refs., 34 figs.

  13. Data mining of space heating system performance in affordable housing

    SciTech Connect (OSTI)

    Ren, Xiaoxin; Yan, Da; Hong, Tianzhen

    2015-02-16

    The space heating in residential buildings accounts for a considerable amount of the primary energy use. Therefore, understanding the operation and performance of space heating systems becomes crucial in improving occupant comfort while reducing energy use. This study investigated the behavior of occupants adjusting their thermostat settings and heating system operations in a 62-unit affordable housing complex in Revere, Massachusetts, USA. The data mining methods, including clustering approach and decision trees, were used to ascertain occupant behavior patterns. Data tabulating ON/OFF space heating states was assessed, to provide a better understanding of the intermittent operation of space heating systems in terms of system cycling frequency and the duration of each operation. The decision tree was used to verify the link between room temperature settings, house and heating system characteristics and the heating energy use. The results suggest that the majority of apartments show fairly constant room temperature profiles with limited variations during a day or between weekday and weekend. Data clustering results revealed six typical patterns of room temperature profiles during the heating season. Space heating systems cycled more frequently than anticipated due to a tight range of room thermostat settings and potentially oversized heating capacities. In conclusion, from this study affirm data mining techniques are an effective method to analyze large datasets and extract hidden patterns to inform design and improve operations.

  14. USE of mine pool water for power plant cooling.

    SciTech Connect (OSTI)

    Veil, J. A.; Kupar, J. M .; Puder, M. G.

    2006-11-27

    Water and energy production issues intersect in numerous ways. Water is produced along with oil and gas, water runs off of or accumulates in coal mines, and water is needed to operate steam electric power plants and hydropower generating facilities. However, water and energy are often not in the proper balance. For example, even if water is available in sufficient quantities, it may not have the physical and chemical characteristics suitable for energy or other uses. This report provides preliminary information about an opportunity to reuse an overabundant water source--ground water accumulated in underground coal mines--for cooling and process water in electric generating facilities. The report was funded by the U.S. Department of Energy's (DOE's) National Energy Technology Laboratory (NETL), which has implemented a water/energy research program (Feeley and Ramezan 2003). Among the topics studied under that program is the availability and use of ''non-traditional sources'' of water for use at power plants. This report supports NETL's water/energy research program.

  15. Occupancy schedules learning process through a data mining framework

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    D'Oca, Simona; Hong, Tianzhen

    2014-12-17

    Building occupancy is a paramount factor in building energy simulations. Specifically, lighting, plug loads, HVAC equipment utilization, fresh air requirements and internal heat gain or loss greatly depends on the level of occupancy within a building. Developing the appropriate methodologies to describe and reproduce the intricate network responsible for human-building interactions are needed. Extrapolation of patterns from big data streams is a powerful analysis technique which will allow for a better understanding of energy usage in buildings. A three-step data mining framework is applied to discover occupancy patterns in office spaces. First, a data set of 16 offices with 10more » minute interval occupancy data, over a two year period is mined through a decision tree model which predicts the occupancy presence. Then a rule induction algorithm is used to learn a pruned set of rules on the results from the decision tree model. Finally, a cluster analysis is employed in order to obtain consistent patterns of occupancy schedules. Furthermore, the identified occupancy rules and schedules are representative as four archetypal working profiles that can be used as input to current building energy modeling programs, such as EnergyPlus or IDA-ICE, to investigate impact of occupant presence on design, operation and energy use in office buildings.« less

  16. A jewel in the desert: BHP Billiton's San Juan underground mine

    SciTech Connect (OSTI)

    Buchsbaum, L.

    2007-12-15

    The Navajo Nation is America's largest native American tribe by population and acreage, and is blessed with large tracks of good coal deposits. BHP Billiton's New Mexico Coal Co. is the largest in the Navajo regeneration area. The holdings comprise the San Juan underground mine, the La Plata surface mine, now in reclamation, and the expanding Navajo surface mine. The article recounts the recent history of the mines. It stresses the emphasis on sensitivity to and helping to sustain tribal culture, and also on safety. San Juan's longwall system is unique to the nation. It started up as an automated system from the outset. Problems caused by hydrogen sulfide are being tackled. San Juan has a bleederless ventilation system to minimise the risk of spontaneous combustion of methane and the atmospheric conditions in the mine are heavily monitored, especially within the gob areas. 3 photos.

  17. A modified version of the geomechanics classification for entry design in underground coal mines

    SciTech Connect (OSTI)

    Newman, D.A.; Bieniawski, Z.T.

    1985-01-01

    The Geomechanics Classification was modified for entry and roof support design in underground room-and-pillar coal mines. Adjustment multipliers were introduced to incorporate the influence of strata weatherability, high horizontal stresses, and the roof support reinforcement factor into the existing classification system. Sixty-two case histories of both standing and fallen mine roof were collected from two mines in the northern Appalachian coalfield. Twenty-seven engineering and geologic parameters were recorded for each case. A partial correlation analysis was carried out on the cases to establish which parameters have a significant impact upon the supported stand-up time of coal mine roof. Survival analysis, a statistical technique used in medical research to assess the effect of a drug or treatment on a patient's life expectancy, was conducted together with stepwise multiple regression to derive values for the adjustment multipliers. A practical example is included to illustrate the application of the modified Geomechanics Classification to underground coal mine design.

  18. Federal oversight of alternative bond systems under SMCRA (Surface Mining Control and Reclamation Act)

    SciTech Connect (OSTI)

    Beier, A.E.; McElfish, J.M. Jr.

    1989-01-01

    The 1977 Surface Mining Control and Reclamation Act (SMCRA) requires mine operators to post reclamation bonds before mining begins. The Federal Office of Surface Mining Reclamation and Enforcement (OSMRE) has approved alternative bond systems in seven states. These systems, rather than requiring bond amounts at the full cost of reclamation, require operators to submit only a flat rate, acreage specific bond. Additional reclamation costs should be covered by a supplemental fund composed generally of permit fees, taxes, or penalties. In many cases, alternative bond systems fail to ensure that funds will be available to reclaim coal mined land in the event of operator default, as required by SMCRA. OSMRE needs to take a more active role in oversight of existing state alternative bond systems to ensure that reclamation occurs.

  19. Evaluation of remediation of coal mining wastewater by chitosan microspheres using biomarkers

    SciTech Connect (OSTI)

    Benassi, J.C.; Laus, R.; Geremias, R.; Lima, P.L.; Menezes, C.T.B.; Laranjeira, M.C.M.; Wilhelm, D.; Favere, V.T.; Pedrosa, R.C.

    2006-11-15

    The aim of this work was to evaluate the remediation of mining wastewater effluents by chitosan microspheres using biomarkers of exposure and effect. DNA damage (Comet assay) and several biomarkers of oxidative stress, such as lipoperoxidation levels (TBARS), superoxide dismutase (SOD), catalase (CAT), and glutathione S-transferase (GST) activities, and contents of reduced glutathione (GSH), were measured in blood and liver of tilapia (Oreochromis niloticus) exposed for 7, 15, and 30 days to dechlorinated tap water, 10% coal mining wastewater (CMW), and coal mining wastewater treated with chitosan microspheres (RCM). The results obtained indicated that the use of oxidative stress biomarkers were useful tools for the toxicity evaluation of coal mining effluents and also suggest that chitosan microspheres may be used as an alternative approach for remediation of coal mining wastewaters.

  20. INTEGRATED POWER GENERATION SYSTEMS FOR COAL MINE WASTE METHANE UTILIZATION

    SciTech Connect (OSTI)

    Peet M. Soot; Dale R. Jesse; Michael E. Smith

    2005-08-01

    An integrated system to utilize the waste coal mine methane (CMM) at the Federal No. 2 Coal Mine in West Virginia was designed and built. The system includes power generation, using internal combustion engines, along with gas processing equipment to upgrade sub-quality waste methane to pipeline quality standards. The power generation has a nominal capacity of 1,200 kw and the gas processing system can treat about 1 million cubic feet per day (1 MMCFD) of gas. The gas processing is based on the Northwest Fuel Development, Inc. (NW Fuel) proprietary continuous pressure swing adsorption (CPSA) process that can remove nitrogen from CMM streams. The two major components of the integrated system are synergistic. The byproduct gas stream from the gas processing equipment can be used as fuel for the power generating equipment. In return, the power generating equipment provides the nominal power requirements of the gas processing equipment. This Phase III effort followed Phase I, which was comprised of a feasibility study for the project, and Phase II, where the final design for the commercial-scale demonstration was completed. The fact that NW Fuel is desirous of continuing to operate the equipment on a commercial basis provides the validation for having advanced the project through all of these phases. The limitation experienced by the project during Phase III was that the CMM available to operate the CPSA system on a commercial basis was not of sufficiently high quality. NW Fuel's CPSA process is limited in its applicability, requiring a relatively high quality of gas as the feed to the process. The CPSA process was demonstrated during Phase III for a limited time, during which the processing capabilities met the expected results, but the process was never capable of providing pipeline quality gas from the available low quality CMM. The NW Fuel CPSA process is a low-cost ''polishing unit'' capable of removing a few percent nitrogen. It was never intended to process CMM

  1. Management of wildlife causing damage at Argonne National Laboratory-East, DuPage County, Illinois

    SciTech Connect (OSTI)

    1995-04-01

    The DOE, after an independent review, has adopted an Environmental Assessment (EA) prepared by the US Department of Agriculture (USDA) which evaluates use of an Integrated Wildlife Damage Management approach at Argonne National Laboratory-East (ANL-E) in DuPage County, Illinois (April 1995). In 1994, the USDA issued a programmatic Environmental Impact Statement (EIS) that covers nationwide animal damage control activities. The EA for Management of Wildlife Causing Damage at ANL-E tiers off this programmatic EIS. The USDA wrote the EA as a result of DOE`s request to USDA to prepare and implement a comprehensive Wildlife Management Damage Plan; the USDA has authority for animal damage control under the Animal Damage Control Act of 1931, as amended, and the Rural Development, Agriculture and Related Agencies Appropriations Act of 1988. DOE has determined, based on the analysis in the EA, that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, the preparation of an EIS is not required. This report contains the Environmental Assessment, as well as the Finding of No Significant Impact (FONSI).

  2. Systematic evaluation of satellite remote sensing for identifying uranium mines and mills.

    SciTech Connect (OSTI)

    Blair, Dianna Sue; Stork, Christopher Lyle; Smartt, Heidi Anne; Smith, Jody Lynn

    2006-01-01

    In this report, we systematically evaluate the ability of current-generation, satellite-based spectroscopic sensors to distinguish uranium mines and mills from other mineral mining and milling operations. We perform this systematic evaluation by (1) outlining the remote, spectroscopic signal generation process, (2) documenting the capabilities of current commercial satellite systems, (3) systematically comparing the uranium mining and milling process to other mineral mining and milling operations, and (4) identifying the most promising observables associated with uranium mining and milling that can be identified using satellite remote sensing. The Ranger uranium mine and mill in Australia serves as a case study where we apply and test the techniques developed in this systematic analysis. Based on literature research of mineral mining and milling practices, we develop a decision tree which utilizes the information contained in one or more observables to determine whether uranium is possibly being mined and/or milled at a given site. Promising observables associated with uranium mining and milling at the Ranger site included in the decision tree are uranium ore, sulfur, the uranium pregnant leach liquor, ammonia, and uranyl compounds and sulfate ion disposed of in the tailings pond. Based on the size, concentration, and spectral characteristics of these promising observables, we then determine whether these observables can be identified using current commercial satellite systems, namely Hyperion, ASTER, and Quickbird. We conclude that the only promising observables at Ranger that can be uniquely identified using a current commercial satellite system (notably Hyperion) are magnesium chlorite in the open pit mine and the sulfur stockpile. Based on the identified magnesium chlorite and sulfur observables, the decision tree narrows the possible mineral candidates at Ranger to uranium, copper, zinc, manganese, vanadium, the rare earths, and phosphorus, all of which are

  3. Cross-correlation of gravitational lensing from DES Science Verification data with SPT and Planck lensing

    SciTech Connect (OSTI)

    Kirk, D.; et al.

    2015-12-14

    We measure the cross-correlation between weak lensing of galaxy images and of the cosmic microwave background (CMB). The effects of gravitational lensing on different sources will be correlated if the lensing is caused by the same mass fluctuations. We use galaxy shape measurements from 139 deg$^{2}$ of the Dark Energy Survey (DES) Science Verification data and overlapping CMB lensing from the South Pole Telescope (SPT) and Planck. The DES source galaxies have a median redshift of $z_{\\rm med} {\\sim} 0.7$, while the CMB lensing kernel is broad and peaks at $z{\\sim}2$. The resulting cross-correlation is maximally sensitive to mass fluctuations at $z{\\sim}0.44$. Assuming the Planck 2015 best-fit cosmology, the amplitude of the DES$\\times$SPT cross-power is found to be $A = 0.88 \\pm 0.30$ and that from DES$\\times$Planck to be $A = 0.86 \\pm 0.39$, where $A=1$ corresponds to the theoretical prediction. These are consistent with the expected signal and correspond to significances of $2.9 \\sigma$ and $2.2 \\sigma$ respectively. We demonstrate that our results are robust to a number of important systematic effects including the shear measurement method, estimator choice, photometric redshift uncertainty and CMB lensing systematics. Significant intrinsic alignment of galaxy shapes would increase the cross-correlation signal inferred from the data; we calculate a value of $A = 1.08 \\pm 0.36$ for DES$\\times$SPT when we correct the observations with a simple IA model. With three measurements of this cross-correlation now existing in the literature, there is not yet reliable evidence for any deviation from the expected LCDM level of cross-correlation, given the size of the statistical uncertainties and the significant impact of systematic errors, particularly IAs. We provide forecasts for the expected signal-to-noise of the combination of the five-year DES survey and SPT-3G.

  4. Assessment of the single-pass thick-seam longwall mining method. Final report

    SciTech Connect (OSTI)

    Adam, R.F.J.; Douglas, W.J.

    1982-04-01

    The objectives of the project are a review of the foreign experiences in longwall mining of thick seams, an evaluation of the US thick seam reserves, a mine design, equipment specifications, and an economic study for longwall mining in a single pass up to 16 feet in US conditions. The review of foreign experience shows a steady increase in the maximum height of extraction with several examples in the range of 13 to 15 feet. Longwall face equipment is available up to an 18 feet height of extraction, based upon shields support and shearer loader. There are important reserves of thick coal seams which can be mined by a longwall in a single pass (125 billion tons). In US conditions, a retreating face with a 16 foot height of extraction and a double entry system, driven 10 feet high, are proposed. The face stability can be improved by using a two bench face cut in good geological conditions. The economic study compares longwall mining with the room-and-pillar method. Longwall mining 16 feet high coal in a single pass can compete advantageously with room-and-pillar mining. 74 figures, 14 tables.

  5. Livestock grazing for management of reclaimed land at Navajo Mine: Animal response

    SciTech Connect (OSTI)

    Gamble, D.C.; Gadzia, K.L.; Raisbeck, M.F.

    1997-12-31

    Livestock responses dining grazing of reclaimed land were monitored at the Navajo Mine since 1994. The Navajo Mine Grazing Management Program (GNP) began in 1991 to prepare for bond release and return of reclaimed land to the Navajo Nation by demonstrating the ability of the land to sustain the post-mining land use of livestock grazing. Local Navajos, whose livestock are used in the GMP, are interested in the ability of the land to sustain their livestock. Sustainable livestock grazing implies the ability of animals to thrive, successfully reproduce and maintain the health of the land. Daily care and monitoring of livestock health was carried out by herders hired by the mining company. General animal health parameters including blood selenium levels were monitored quarterly. Livestock responses to grazing reclaimed land have been largely positive. Cows have produced healthy offspring and owners indicate satisfaction with calf size, and overall performance of the cows. Selenium and other blood testing parameters indicate no adverse effect on animal health to date. Hazards associated with reclamation and ongoing mining activities are important considerations for lands being reclaimed for livestock grazing as a post-mining land use and must be monitored carefully during any grazing program. Preliminary results indicate that planned grazing by cattle on reclaimed land at Navajo Mine is feasible and does not adversely affect animal health.

  6. LLNL`s partnership with selected US mines, for CTBT verification: A pictorial and some reflections

    SciTech Connect (OSTI)

    Heuze, F.E.

    1996-01-01

    The verification of an upcoming Comprehensive Test Ban Treaty (CTBT) will involve seismic monitoring and will provide for on-site inspections which may include drilling. Because of the fact that mining operations can send out strong seismic signals, many mining districts in the US and abroad may come under special scrutiny. The seismic signals can be generated by the use of large quantities of conventional explosives, by the collapse of underground workings, or by sudden energy release in the ground such as in rock bursts and coal bumps. These mining activities may be the cause of false alarms, but may also offer opportunities for evasive nuclear testing. So in preparing for future verification of a CTBT it becomes important to address the mining-related questions. For the United States, these are questions to be answered with respect to foreign mines. But there is a good amount of commonality in mining methods worldwide. Studies conducted at US mine sites can provide good analogs of activities that may be carried out for overseas CTBT verification, save for the expected logistical impediments.

  7. Mining Large Heterogeneous Graphs using Cray s Urika

    SciTech Connect (OSTI)

    Sukumar, Sreenivas R; Bond, Nathaniel A

    2013-01-01

    Pattern discovery and predictive modeling from seemingly related Big Data represented as massive, ad-hoc, heterogeneous networks (e.g., extremely large graphs with complex, possibly unknown structure) is an outstanding problem in many application domains. To address this problem, we are designing graph-mining algorithms capable of discovering relationship-patterns from such data and using those discovered patterns as features for classification and predictive modeling. Specifically, we are: (i) exploring statistical properties, mechanics and generative models of behavior patterns in heterogeneous information networks, (ii) developing novel, automated and scalable graph-pattern discovery algorithms and (iii) applying our relationship-analytics (data science + network science) expertise to domains spanning healthcare to homeland security.

  8. Mining Behavior Based Safety Data to Predict Safety Performance

    SciTech Connect (OSTI)

    Jeffrey C. Joe

    2010-06-01

    The Idaho National Laboratory (INL) operates a behavior based safety program called Safety Observations Achieve Results (SOAR). This peer-to-peer observation program encourages employees to perform in-field observations of each other's work practices and habits (i.e., behaviors). The underlying premise of conducting these observations is that more serious accidents are prevented from occurring because lower level “at risk” behaviors are identified and corrected before they can propagate into culturally accepted “unsafe” behaviors that result in injuries or fatalities. Although the approach increases employee involvement in safety, the premise of the program has not been subject to sufficient empirical evaluation. The INL now has a significant amount of SOAR data on these lower level “at risk” behaviors. This paper describes the use of data mining techniques to analyze these data to determine whether they can predict if and when a more serious accident will occur.

  9. Reclamation of acidic copper mine tailings using municipal biosolids

    SciTech Connect (OSTI)

    Rogers, M.T.; Thompson, T.L.; Bengson, S.A.

    1998-12-31

    Reclamation of copper mine tailings in a cost effective, successful, and sustainable manner is an ongoing area of evaluation in the arid southwest. A study was initiated in September, 1996 near Hayden, Arizona to evaluate the use of municipal biosolids for reclaiming acidic copper mine tailings (pH of 2.5 to 4.0). The main objectives of the study were to (1) define an appropriate level of biosolids application for optimum plant growth, and (2) evaluate the effects of green waste and lime amendments. The experiment was a randomized complete block design with four biosolid rates of 20, 70, 100 and 135 dry tons/acre, three amendment treatments (none, green waste, and green waste plus lime); with three replications. Non-replicated controls (no treatment, green waste only and lime only) were included for comparison. Shortly after biosolids incorporation to a depth of 10--12 inches, composite soil samples (0--12 inches) of each plot were taken. Biosolids incorporation increased the pH of the tailings (>5.75) and additional increases in pH were noted with lime application. In January 1997, the plots were seeded and sprinkler irrigation was commenced. A total of 4.47 inches of rainfall and 3.8 inches of irrigation were applied until harvest in May 1997. Data from the first growing season indicates optimum growth (>66 lbs/acre) at biosolids rates of 70--100 dry tons/acre. There was a significant positive effect on growth of green waste and lime amendments. Surface NO{sub 3}-N concentrations in biosolids amended plots were greatly reduced (from 23 to 6 mg/kg) by addition of green waste. There was no evidence for NO{sub 3}N leaching below 12 inches.

  10. S. 276: A Bill to amend the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage, and for other purposes. Introduced in the Senate of the United States, One Hundred Third Congress, First Session, February 2, 1993

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    This bill amends the Surface Mining Control and Reclamation Act of 1977 to improve control of acid mine drainage. State use of funds is addressed.

  11. Respirable dust control on longwall mining operations in the United States

    SciTech Connect (OSTI)

    Mundell, R.L.; Jankowski, R.A.; Ondrey, R.S.; Tomb, T.F.

    1984-01-01

    Between 1967 and 1978 use of longwall methods to mine coal in the United States continually increased. Although these methods offer several advantages, health hazards often exist because of unique and difficult problems in the control of respirable dust. This paper discusses the results of respirable dust studies conducted on United States longwall mining operations in 1972 and 1978. Prevalent engineering control methods (ventilation, water application and use of machine cutting parameters) and administrative controls for minimizing employees' respirable dust exposure are discussed. Current research efforts for the control of respirable dust on longwall mining operations are reviewed. 21 figs.

  12. New Forces at Work in Mining: Industry View of Critical Technologies

    SciTech Connect (OSTI)

    Peterson, D. J.; LaTourrette, Tom; Bartis, James T.

    2007-04-01

    RAND has just published a report entitled, "New Forces at Work in Mining: Industry Views of Critical Technologies," by D. J. Peterson, Tom LaTourrette, and James T. Bartis. The report presents the results of a series of in-depth discussions with leading mining industry representatives selected for their prominent position and their ability to think broadly about technology trends. The discussions highlighted the importance of collaborative technology research, development, and implementation strategies and the increasingly critical role of mine personnel in the utilization of new technologies.

  13. Text and Structural Data Mining of Influenza Mentions in Web and Social Media

    SciTech Connect (OSTI)

    Corley, Courtney D.; Cook, Diane; Mikler, Armin R.; Singh, Karan P.

    2010-02-22

    Text and structural data mining of Web and social media (WSM) provides a novel disease surveillance resource and can identify online communities for targeted public health communications (PHC) to assure wide dissemination of pertinent information. WSM that mention influenza are harvested over a 24-week period, 5-October-2008 to 21-March-2009. Link analysis reveals communities for targeted PHC. Text mining is shown to identify trends in flu posts that correlate to real-world influenza-like-illness patient report data. We also bring to bear a graph-based data mining technique to detect anomalies among flu blogs connected by publisher type, links, and user-tags.

  14. DOE - Office of Legacy Management -- Union Mines Development Corp - NY 0-22

    Office of Legacy Management (LM)

    Mines Development Corp - NY 0-22 FUSRAP Considered Sites Site: UNION MINES DEVELOPMENT CORP. (NY.0-22) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Union Carbide NY.0-22-1 Location: New York , New York NY.0-22-1 Evaluation Year: 1987 NY.0-22-1 Site Operations: The company owned uranium mines or reserves located in the western U.S. NY.0-22-1 Site Disposition: Eliminated - No reason to believe radioactive material was used at this site NY.0-22-1

  15. Mapping and Simulating Systematics Due to Spatially-Varying Observing Conditions in DES Science Verification Data

    SciTech Connect (OSTI)

    Leistedt, B.

    2015-07-20

    Spatially-varying depth and characteristics of observing conditions, such as seeing, airmass, or sky background, are major sources of systematic uncertainties in modern galaxy survey analyses, in particular in deep multi-epoch surveys. We present a framework to extract and project these sources of systematics onto the sky, and apply it to the Dark Energy Survey (DES) to map the observing conditions of the Science Verification (SV) data. The resulting distributions and maps of sources of systematics are used in several analyses of DES SV to perform detailed null tests with the data, and also to incorporate systematics in survey simulations. We illustrate the complementarity of these two approaches by comparing the SV data with the BCC-UFig, a synthetic sky catalogue generated by forward-modelling of the DES SV images. We then analyse the BCC-UFig simulation to construct galaxy samples mimicking those used in SV galaxy clustering studies. We show that the spatially-varying survey depth imprinted in the observed galaxy densities and the redshift distributions of the SV data are successfully reproduced by the simulation and well-captured by the maps of observing conditions. The combined use of the maps, the SV data and the BCC-UFig simulation allows us to quantify the impact of spatial systematics on N(z), the redshift distributions inferred using photometric redshifts. We conclude that spatial systematics in the SV data are mainly due to seeing fluctuations and are under control in current clustering and weak lensing analyses. However, they will need to be carefully characterised in upcoming phases of DES in order to avoid biasing the inferred cosmological results. The framework presented is relevant to all multi-epoch surveys, and will be essential for exploiting future surveys such as the Large Synoptic Survey Telescope, which will require detailed null-tests and realistic end-to-end image simulations to correctly interpret the deep, high-cadence observations of the

  16. H. R. 4804: A bill to amend titles I, II, IV and V of the Surface Mining Control and Reclamation Act of 1977, and to add a new title X, to encourage the remining and reclamation of abandoned mined lands by active mining operations, and for other purposes. Introduced in the House of Representatives, One Hundredth Congress, Second Session, June 14, 1988

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    Surface coal mining operations can be effective in the reclamation of abandoned mined lands and are being encouraged by the amendments to the existing Surface Mining Control and Reclamation Act of 1977. The new section X - Remining spells out the authority of the Secretary of the Interior to enter into agreements with mining companies to use excess spoil from an active surface mine to reclaim an abandoned site, to develop a bond guarantee program whereby the operators may be compensated with reclamation bond credits for up to 80% of the reclamation costs incurred, and to make funds available on a matching basis to states or tribes to collect certain geologic and hydrologic data for watersheds or regions adversely affected by past coal mining abuses for the use of regulatory authorities to assist applicants for surface mining permits within such areas.

  17. EIA new releases: EIA examines the growing importance of longwall mining

    SciTech Connect (OSTI)

    1995-05-17

    This publication disseminates information on progress in various DOE research areas. This issues contains information on Longwall mining; electric fleet utility survey; electronic publishing system; other publications of the EIA; and places from which to purchase publications.

  18. Geomechanical analyses to investigate wellbore/mine interactions in the Potash Enclave of Southeastern New Mexico.

    SciTech Connect (OSTI)

    Ehgartner, Brian L.; Bean, James E.; Arguello, Jose Guadalupe, Jr.; Stone, Charles Michael

    2010-04-01

    Geomechanical analyses have been performed to investigate potential mine interactions with wellbores that could occur in the Potash Enclave of Southeastern New Mexico. Two basic models were used in the study; (1) a global model that simulates the mechanics associated with mining and subsidence and (2) a wellbore model that examines the resulting interaction impacts on the wellbore casing. The first model is a 2D approximation of a potash mine using a plane strain idealization for mine depths of 304.8 m (1000 ft) and 609.6 m (2000 ft). A 3D wellbore model then considers the impact of bedding plane slippage across single and double cased wells cemented through the Salado formation. The wellbore model establishes allowable slippage to prevent casing yield.

  19. Characterization of seven United States coal regions. The development of optimal terrace pit coal mining systems

    SciTech Connect (OSTI)

    Wimer, R.L.; Adams, M.A.; Jurich, D.M.

    1981-02-01

    This report characterizes seven United State coal regions in the Northern Great Plains, Rocky Mountain, Interior, and Gulf Coast coal provinces. Descriptions include those of the Fort Union, Powder River, Green River, Four Corners, Lower Missouri, Illinois Basin, and Texas Gulf coal resource regions. The resource characterizations describe geologic, geographic, hydrologic, environmental and climatological conditions of each region, coal ranks and qualities, extent of reserves, reclamation requirements, and current mining activities. The report was compiled as a basis for the development of hypothetical coal mining situations for comparison of conventional and terrace pit surface mining methods, under contract to the Department of Energy, Contract No. DE-AC01-79ET10023, entitled The Development of Optimal Terrace Pit Coal Mining Systems.

  20. EIS-0010: Strategic Petroleum Reserves, Sulphur Mines Salt Dome, Calcasieu Parish, Louisiana

    Broader source: Energy.gov [DOE]

    The Strategic Petroleum Reserves prepared this EIS to assess the environmental impacts of the proposed storage of 24 million barrels of crude oil at the Sulphur Mines salt dome located in Calcasieu Parish, Louisiana, including construction and operation impacts.

  1. Cost analysis of aerial photographic and satellite imagery for monitoring mined land reclamation

    SciTech Connect (OSTI)

    Green, J.E.; Buschur, J.P.

    1980-12-01

    Five sections of the Surface Mining Control and Reclamation Act of 1977 require information that is easily and efficiently obtainable by aerial photographic and remote sensing methods. Most states in which mining is important and to which the Act most specifically applies, maintain or have available to them aerial photographic or remotely sensed information of the type required. This information could be used to meet the requirements of the Act which call for monitoring reclamation progress, identifying land areas unsuitable for mining and determining land use prior to mining to name a few examples. At the regional scale, LANDSAT imagery of a scale of 1:250,000 provides a good combination of aerial coverage and detail for regional problem solving. At the local scale, such coverage as is provided by the Agricultural Stabilization and Conservation Service through their aerial observation method of compliance technique can supply local, detailed information to meet site specific needs.

  2. DOE Submits Its Defense-Related Uranium Mines Report to Congress

    Broader source: Energy.gov [DOE]

    Dr. Ernest Moniz, the U.S. Secretary of Energy, submitted the U.S. Department of Energy (DOE) Defense-Related Uranium Mines Report to Congress on September 2, 2014. Section 3151 of the National...

  3. Legacy Management Work Progresses on Defense-Related Uranium Mines Report to Congress

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Office of Legacy Management (LM) continues to work on a report to Congress regarding defense-related legacy uranium mines. LM was directed by the U.S. Congress in the...

  4. Pre-operational survey of a U mine near Val Vedello, Italy

    SciTech Connect (OSTI)

    Fenzi, A.

    1986-08-01

    Results obtained from radiometric research carried out from 1980-81 in the region of U mines in the Val Vedello are provided. Data are presented on /sup 2/)2''/sup 2/Rn, /sup 226/Ra and natural U concentrations in spring and surface waters. Concentrations were found to be relatively low. There is some increase in the vicinity of the exploratory U mine but this is, at least up to the present, only of a local character. Data are presented on external gamma exposure, /sup 210/Pb and /sup 210/Po in foodstuffs and in the urine of normal and exposed population as well as /sup 226/Ra in milk and vegetable samples. The aim of this study is to outline a preliminary map of natural radioactivity on the site before starting the mining activity. This will enable us later to detect changes caused by the U mining, milling and mill-tailing disposal operations.

  5. Nevada Bureau of Mines and Geology Open-File Report 12-3: Data...

    Open Energy Info (EERE)

    2012 Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Nevada Bureau of Mines and Geology Open-File Report 12-3: Data Tables and graphs of geothermal power...

  6. Estimated use of explosives in the mining industries of Algeria, Iran, Iraq, and Libya

    SciTech Connect (OSTI)

    Wilburn, D.R.; Russell, J.A.; Bleiwas, D.I.

    1995-09-01

    This work was performed under Memorandum of Agreement B291534 Between the Lawrence Livermore National Laboratory (LLNL) and the United States Bureau of Mines. The Bureau of Mines authors are members of the Minerals Availability Field Office (MAFO) in Denver, CO, which uses an extensive network of information sources to develop and maintain the Minerals Availability database concerning mining and minerals properties worldwide. This study was initiated and directed by F. Heuze at LLNL. A previous study on the same subject had been commissioned by LLNL from the Mining Journal Research Services (MJRS) in London ,UK. Its results were integrated into this report. MJRS is shown as one of the numerous sources which were used for this work. All sources are listed in the report. This document is arranged in four sections, one for each country, in alphabetical order. Thie outline is the same for each country.

  7. 31 TAC, part 4, chapter 155, rule 155.42 Mining Leases on Properties...

    Open Energy Info (EERE)

    2 Mining Leases on Properties Subject to Prospect Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: 31 TAC, part 4, chapter...

  8. Automated Analysis of Renewable Energy Datasets ('EE/RE Data Mining')

    SciTech Connect (OSTI)

    Bush, Brian; Elmore, Ryan; Getman, Dan; Inman, Daniel; Kalendra, Eric

    2013-06-13

    This poster illustrates methods to substantially improve the understanding of renewable energy data sets and the depth and efficiency of their analysis through the application of statistical learning methods ('data mining') in the intelligent processing of these often large and messy information sources. The six examples apply methods for anomaly detection, data cleansing, and pattern mining to time-series data (measurements from metering points in buildings) and spatiotemporal data (renewable energy resource datasets).

  9. Microsoft Word - DOE-ID-11-007 Colorado Mines EC.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 SECTION A. Project Title: Imaging Upgrades for the Colorado School of Mines Nuclear Science and Engineering Program - Colorado School of Mines SECTION B. Project Description This project has three objectives: 1. Upgrade the Transmission Electron Microscope in the Active Materials Characterization Laboratory (ActMCL) with a digital imaging system 2. Upgrade the ActMCL and Nuclear Fuel Development Lab (NFDL) with modern radiation detection and measurement equipment, for both research and

  10. Microsoft Word - DOE-ID-12-009 Colorado School of Mines.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    09 SECTION A. Project Title: Upgrades to the Colorado School of Mines Neutron Imaging Beam-Line SECTION B. Project Description The Colorado School Mines project has three objectives: - Upgrade CSM's Neutron Imaging Beam-Line, including the addition of several modular filters that will allow fine-tuning of the resulting neutron beam - Provide additional neutron detection and measurement equipment to allow direct measurement of the beam's neutron flux and energy spectrum by purchasing a gamma+

  11. DOE - Office of Legacy Management -- Colorado School of Mines - CO 01

    Office of Legacy Management (LM)

    School of Mines - CO 01 FUSRAP Considered Sites Site: Colorado School of Mines ( CO.01 ) Eliminated from consideration under FUSRAP - Licensed operation Designated Name: Not Designated Alternate Name: None Location: Golden , Colorado CO.01-1 Evaluation Year: 1987 CO.01-1 CO.01-2 Site Operations: Research and Development on testing and processing of uranium ores. CO.01-3 Site Disposition: Eliminated - No Authority - Engaged in state licensed operations CO.01-1 CO.01-2 Radioactive Materials

  12. U.S. Energy Deputy Secretary Poneman, Brazil's Deputy Minister of Mines

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Energy Zimmermann Sign Advance Bilateral Energy Relationship | Department of Energy Deputy Secretary Poneman, Brazil's Deputy Minister of Mines and Energy Zimmermann Sign Advance Bilateral Energy Relationship U.S. Energy Deputy Secretary Poneman, Brazil's Deputy Minister of Mines and Energy Zimmermann Sign Advance Bilateral Energy Relationship March 20, 2013 - 4:34pm Addthis NEWS MEDIA CONTACT (202) 586-4940 JOINT STATEMENT Brasilia, Brazil - U.S. Energy Deputy Secretary Daniel Poneman

  13. DEVELOPMENT OF A COMPREHENSIVE WIRELESS COMMUNICATIONS SYSTEM FOR THE UNDERGROUND MINING INDUSTRY

    SciTech Connect (OSTI)

    Zvi H. Meiksin

    2001-04-01

    Progress continued along both subsystems towards an integrated comprehensive wireless communications system for the underground mining industry. Designing an automated continuous self-tuning mechanism that optimizes signal transmission intensity for a given power input enhanced through-the-earth communications. In-mine communications was enhanced through the design of a circuit that eliminates multi-antenna interference, cleaning-up the received signal.

  14. Assessing Fossil and New Carbon in Reclaimed Mined Soils

    SciTech Connect (OSTI)

    Rattan Lal; David Ussiri

    2008-09-30

    Soil organic carbon (SOC) pool in the reclaimed minesoils (RMS) is the mixture of coal C originating from mining and reclamation activities and recent plant-derived organic carbon (OC). Accurate estimates of OC pools and sequestration rates in the RMS are limited by lack of standard and cost-effective method for determination of coal-C concentration. The main objective of this project was to develop and test analytical procedures for quantifying pool sizes of coal-derived C in RMS and to partition organic C in RMS into coal-derived and newly deposited SOC fractions. Analysis of soil and coal artificial mixtures indicated that the {Delta}{sup 13}C method developed was very effective in estimating coal C added in the mixtures, especially soils under C4 plants. However, most of the reclaimed sites in Ohio are under C3 plants with range of {Delta}{sup 13}C signal falling within ranges of coal. The wide range of {Delta}{sup 13}C signal observed in minesoils, (i.e. -26 to -30 for plants and -23 to -26 for coal) limits the ability of this approach to be used for southeast Ohio minesoils. This method is applicable for reclaimed prime farm land under long term corn or corn soybean rotation. Chemi-thermal method was very effective in quantifying coal-C fraction in both soil-coal artificial mixtures and minesoils. The recovery of coal-C from the mixture ranged from 93 to 100% of coal. Cross-validation of chemi-thermal method with radiocarbon analysis revealed that chemi-thermal method was as effective as radiocarbon analysis in quantifying coal-C in RMS. Coal C determined after chemi-thermal treatment of samples was highly correlated with coal C concentration calculated by radiocarbon activity (r{sup 2} = 0.95, P < 0.01). Therefore, both radiocarbon activity and chemi-thermal method were effective in estimating coal carbon concentration in reclaimed minesoils of southeast Ohio. Overall, both coal-C and recent OC fraction exhibited high spatial and depth variation, suggesting

  15. Electricity and technical progress: The bituminous coal mining industry, mechanization to automation

    SciTech Connect (OSTI)

    Devine, W.D. Jr.

    1987-07-01

    Development and use of electric mobile machinery facilitated the mechanization of underground bituminous coal mining and has played a lesser but important role in the growth of surface mining. Electricity has been central to the rise of mechanically integrated mining, both underground (after 1950) and on the surface (recently). Increasing labor productivity in coal mining and decreasing total energy use per ton of coal mined are associated with penetration of new electric technology through at least 1967. Productivity declined and energy intensity increased during the 1970s due in part to government regulations. Recent productivity gains stem partly from new technology that permits automation of certain mining operations. On most big electric excavating machines, a pair of large alternating current (ac) motors operate continuously at full speed. These drive direct current (dc) generators that energize dc motors, each matched to the desired power and speed range of a particular machine function. Direct-current motors provide high torque at low speeds, thus reducing the amount of gearing required; each crawler is independently propelled forward or backward by its own variable-speed dc motors. The principal advantages of electric power are that mechanical power-transmission systems - shafts, gears, etc. - are eliminated or greatly simplified. Reliability is higher, lifetime is longer, and maintenance is much simpler with electric power than with diesel power, and the spare parts inventory is considerably smaller. 100 refs., 11 figs., 12 tabs.

  16. Standard for metal/nonmetal mining and metal mineral processing facilities. 2004 ed.

    SciTech Connect (OSTI)

    2004-07-01

    This standard addresses the protection of diesel-powered equipment and the storage and handling of flammable and combustible liquids at these specialized sites. The 2004 edition consolidates requirements from NFPA 122 and 121 : Standard on Fire Protection for Self-Propelled and Mobile Surface Mining Equipment. Major changes include a new chapter on fire protection of surface metal mineral processing plants. The Standard is also revised to emphasize the use of a fire risk assessment when determining fire protection criteria. Chapter headings are: Administration; Referenced publications; Definitions; General; Fire risk assessment and risk reduction; Fire detection and suppression equipment; Fire protection for diesel-powered equipment in underground mines; Transfer of flammable or combustible liquids in underground mines; Flammable liquid storage in underground mines; Combustible liquid storage in underground mines; Fire suppression for flammable or combustible liquid storage areas in underground mines; Fire protection of surface mobile and self-propelled equipment; and Fire protection of surface metal mineral processing plants. 3 annexes.

  17. Coal mining in the United States: SMCRA`s successful blueprint

    SciTech Connect (OSTI)

    Henry, K.L.

    1997-06-01

    In his forward in Night Comes to the Cumberlands, former Secretary of the Interior Stewart Udall observed that Caudill`s constructive proposals for rehabilitation of the coal counties {open_quotes}will take deep concern by people in Washington and Frankfort to bring them to fruition.{close_quotes} Deep concern for the impacts that poorly regulated surface coal mining were having on the human and natural environment animated a decade-long struggle to establish national policy for surface coal mining. The result was the Surface Mining Control and Reclamation Act of 1977, P.L. 95-97 (SMCRA). Enacted to implement a national framework for regulating the environmental effects of surface coal mining, the law established a national program for controlling environmental impacts and ensuring the reclamation of lands affected by surface mining activity. From the perspective of nearly two decades, most observers would conclude that SMCRA is an example of successful policy implementation. Few national environmental laws have succeeded as well in terms of on-the-ground results: coal production has increased dramatically and industry has made significant gains in productivity while incorporating environmental and reclamation requirements in its daily operations, lowering the cost of reclamation and environmental protection. This article discusses and evaluates the SMCRA and its effect on surface coal mining. 2 tabs.

  18. Methodology for tomographic imaging ahead of mining using the shearer as a seismic source

    SciTech Connect (OSTI)

    King, A.; Luo, X.

    2009-03-15

    Poor rock conditions in a coal long wall panel can result in roof collapse when a problematic zone is mined, significantly interrupting mine production. The ability to image rock conditions (stress and degree of fracturing) ahead of the face gives the miners the ability to respond proactively to such problems. This method uses the energy from mining machinery, in this case a coal shearer, to produce an image of the rock velocity ahead of the mining face without interrupting mining. Data from an experiment illustrates the concept. Geophones installed in gate-road roofs record the noise generated by the shearer after it has traversed the panel ahead of the mining face. A generalized crosscorrelation of the signals from pairs of sensors determines relative arrival times from the continuous seismic noise produced by the shearer. These relative times can then be inverted for a velocity structure. The crosscorrelations, performed in the frequency domain, are weighted by a confidence value derived from the spectral coherence between the traces. This produces stable crosscorrelation lags in the presence of noise. The errors in the time-domain data are propagated through to the relative traveltimes and then to the final tomographic velocity image, yielding an estimate of the uncertainty in velocity at each point. This velocity image can then be used to infer information about the stress and fracture state of the rock, providing advance warning of potentially hazardous zones.

  19. Oil shale mining studies and analyses of some potential unconventional uses for oil shale

    SciTech Connect (OSTI)

    McCarthy, H.E.; Clayson, R.L.

    1989-07-01

    Engineering studies and literature review performed under this contract have resulted in improved understanding of oil shale mining costs, spent shale disposal costs, and potential unconventional uses for oil shale. Topics discussed include: costs of conventional mining of oil shale; a mining scenario in which a minimal-scale mine, consistent with a niche market industry, was incorporated into a mine design; a discussion on the benefits of mine opening on an accelerated schedule and quantified through discounted cash flow return on investment (DCFROI) modelling; an estimate of the costs of disposal of spent shale underground and on the surface; tabulation of potential increases in resource recovery in conjunction with underground spent shale disposal; the potential uses of oil shale as a sulfur absorbent in electric power generation; the possible use of spent shale as a soil stabilizer for road bases, quantified and evaluated for potential economic impact upon representative oil shale projects; and the feasibility of co-production of electricity and the effect of project-owned and utility-owned power generation facilities were evaluated. 24 refs., 5 figs., 19 tabs.

  20. Power plant waste disposals in open-cast mines

    SciTech Connect (OSTI)

    Herstus, J.; Stastny, J.

    1995-12-01

    High population density in Czech Republic has led, as well as in other countries, to strong NIMBY syndrome influencing the waste disposal location. The largest thermal power plants are situated in neighborhood of extensive open-cast brown coal mines with huge area covered by tipped clayey spoil. Such spoil areas, technically almost useless, are potential space for power giant waste disposal position. There are several limitations, based on specific structural features of tipped clayey spoil, influencing decision to use such area as site for waste disposal. Low shear strength and extremely high compressibility belong to the geotechnical limitations. High permeability of upper ten or more meters of tipped spoil and its changes with applied stress level belongs to transitional features between geotechnical and environmental limitations. The problems of ash and FGD products stabilized interaction with such subgrade represent environmental limitation. The paper reports about the testing procedure developed for thickness and permeability estimation of upper soil layer and gives brief review of laboratory and site investigation results on potential sites from point of view of above mentioned limitations. Also gives an outline how to eliminate the influence of unfavorable conditions.