Sample records for deployment system reeds

  1. Regional Energy Deployment System (ReEDS)

    SciTech Connect (OSTI)

    Short, W.; Sullivan, P.; Mai, T.; Mowers, M.; Uriarte, C.; Blair, N.; Heimiller, D.; Martinez, A.

    2011-12-01T23:59:59.000Z

    The Regional Energy Deployment System (ReEDS) is a deterministic optimization model of the deployment of electric power generation technologies and transmission infrastructure throughout the contiguous United States into the future. The model, developed by the National Renewable Energy Laboratory's Strategic Energy Analysis Center, is designed to analyze the critical energy issues in the electric sector, especially with respect to potential energy policies, such as clean energy and renewable energy standards or carbon restrictions. ReEDS provides a detailed treatment of electricity-generating and electrical storage technologies and specifically addresses a variety of issues related to renewable energy technologies, including accessibility and cost of transmission, regional quality of renewable resources, seasonal and diurnal generation profiles, variability of wind and solar power, and the influence of variability on the reliability of the electrical grid. ReEDS addresses these issues through a highly discretized regional structure, explicit statistical treatment of the variability in wind and solar output over time, and consideration of ancillary services' requirements and costs.

  2. Integrated Canada-U.S. Power Sector Modeling with the Regional Energy Deployment System (ReEDS)

    SciTech Connect (OSTI)

    Martinez, A.; Eurek, K.; Mai, T.; Perry, A.

    2013-02-01T23:59:59.000Z

    The electric power system in North America is linked between the United States and Canada. Canada has historically been a net exporter of electricity to the United States. The extent to which this remains true will depend on the future evolution of power markets, technology deployment, and policies. To evaluate these and related questions, we modify the Regional Energy Deployment System (ReEDS) model to include an explicit representation of the grid-connected power system in Canada to the continental United States. ReEDS is unique among long-term capacity expansion models for its high spatial resolution and statistical treatment of the impact of variable renewable generation on capacity planning and dispatch. These unique traits are extended to new Canadian regions. We present example scenario results using the fully integrated Canada-U.S. version of ReEDS to demonstrate model capabilities. The newly developed, integrated Canada-U.S. ReEDS model can be used to analyze the dynamics of electricity transfers and other grid services between the two countries under different scenarios.

  3. Remote Systems Design & Deployment

    SciTech Connect (OSTI)

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28T23:59:59.000Z

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  4. Intelligent Transportation Systems Deployment Statistics Database

    E-Print Network [OSTI]

    Intelligent Transportation Systems Deployment Statistics Database Oak Ridge National Laboratory direction. In addition, through the ITS Deployment Tracking web site, the database supports other users in 2010. Users can also download the entire 2010 deployment tracking database through the website

  5. Regional Energy Deployment System (ReEDS) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form History FacebookRegenesys Holdings Ltd Jump to:

  6. NREL: Regional Energy Deployment System (ReEDS) Model - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCost of6 JulyDevelopment

  7. NREL: Regional Energy Deployment System (ReEDS) Model - Webmaster

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCost of6 JulyDevelopmentReEDS Unique

  8. Regional Energy Deployment System (ReEDS) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation, searchRayreviewAl., 2005) |

  9. Disposable telemetry cable deployment system

    DOE Patents [OSTI]

    Holcomb, David Joseph (Sandia Park, NM)

    2000-01-01T23:59:59.000Z

    A disposable telemetry cable deployment system for facilitating information retrieval while drilling a well includes a cable spool adapted for insertion into a drill string and an unarmored fiber optic cable spooled onto the spool cable and having a downhole end and a stinger end. Connected to the cable spool is a rigid stinger which extends through a kelly of the drilling apparatus. A data transmission device for transmitting data to a data acquisition system is disposed either within or on the upper end of the rigid stinger.

  10. A Buildings Module for the Stochastic Energy Deployment System

    E-Print Network [OSTI]

    Marnay, Chris

    2008-01-01T23:59:59.000Z

    Stochastic Energy Deployment System Chris Marnay a , Michael Stadler a, b , SamStochastic Energy Deployment System 1 Chris Marnay a) , Michael Stadler a),b) , Sam

  11. Deploying Darter A Cray XC30 System

    SciTech Connect (OSTI)

    Fahey, Mark R [ORNL] [ORNL; Budiardja, Reuben D [ORNL] [ORNL; Crosby, Lonnie D [ORNL] [ORNL; McNally, Stephen T [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    TheUniversityofTennessee,KnoxvilleacquiredaCrayXC30 supercomputer, called Darter, with a peak performance of 248.9 Ter- aflops. Darter was deployed in late March of 2013 with a very aggressive production timeline - the system was deployed, accepted, and placed into production in only 2 weeks. The Spring Experiment for the Center for Analysis and Prediction of Storms (CAPS) largely drove the accelerated timeline, as the experiment was scheduled to start in mid-April. The Consortium for Advanced Simulation of Light Water Reactors (CASL) project also needed access and was able to meet their tight deadlines on the newly acquired XC30. Darter s accelerated deployment and op- erations schedule resulted in substantial scientific impacts within the re- search community as well as immediate real-world impacts such as early severe tornado warnings

  12. ReEDS Modeling of the President's 2020 U.S. Renewable Electricity Generation Goal (Presentation)

    SciTech Connect (OSTI)

    Zinaman, O.; Mai, T.; Lantz, E.; Gelman, R.; Porro, G.

    2014-05-01T23:59:59.000Z

    President Obama announced in 2012 an Administration Goal for the United States to double aggregate renewable electricity generation from wind, solar, and geothermal sources by 2020. This analysis, using the Regional Energy Deployment System (ReEDS) model, explores a full range of future renewable deployment scenarios out to 2020 to assess progress and outlook toward this goal. Under all modeled conditions, consisting of 21 scenarios, the Administration Goal is met before 2020, and as early as 2015.

  13. NREL: Energy Analysis - Regional Energy Deployment System (ReEDS) Model

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit | NationalWebmaster To contactK-12BSM(ATB)Regional

  14. NREL: Regional Energy Deployment System (ReEDS) Model - Documentation of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCost of6 JulyDevelopment andWorking with

  15. NREL: Regional Energy Deployment System (ReEDS) Model - Model Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCost of6 JulyDevelopment andWorking

  16. NREL: Regional Energy Deployment System (ReEDS) Model - Unique Value of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCost of6 JulyDevelopmentReEDS Unique Value

  17. Deploying Server-side File System Monitoring at NERSC

    E-Print Network [OSTI]

    Uselton, Andrew

    2009-01-01T23:59:59.000Z

    Deploying Server-side File System Monitoring at NERSC Andrewcenter was equipped with the server-side I/O monitoringfor observing and recording server-side per- formance

  18. Space Systems Finland 1 Deployment in the Space Sector

    E-Print Network [OSTI]

    Southampton, University of

    © Space Systems Finland 1 Deployment in the Space Sector #12;© Space Systems Finland 2 SW Constraints Design Requirements User Requirements SW Requirements #12;© Space Systems Finland 3 The space, but there is no viable alternative · Many requirements are not testable #12;© Space Systems Finland 4 SSF OBJECTIVES

  19. Representation of the Solar Capacity Value in the ReEDS Capacity Expansion Model: Preprint

    SciTech Connect (OSTI)

    Sigrin, B.; Sullivan, P.; Ibanez, E.; Margolis, R.

    2014-08-01T23:59:59.000Z

    An important emerging issue is the estimation of renewables' contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to resource variability. Reliability-based methods, particularly, effective load-carrying capacity (ELCC), are considered to be the most robust techniques for addressing this resource variability. The Regional Energy Deployment System (ReEDS) capacity expansion model and other long-term electricity capacity planning models require an approach to estimating CV for generalized PV and system configurations with low computational and data requirements. In this paper we validate treatment of solar photovoltaic (PV) capacity value by ReEDS capacity expansion model by comparing model results to literature for a range of energy penetration levels. Results from the ReEDS model are found to compare well with both comparisons--despite not being resolved at an hourly scale.

  20. Hydrogen Deployment System Modeling Environment (HyDS ME) Documentation: Milestone Report FY 2006

    SciTech Connect (OSTI)

    Parks. K.

    2006-11-01T23:59:59.000Z

    This report introduces the Hydrogen Deployment System Modeling Environment model, assumptions, and basic operations.

  1. NREL: Technology Deployment - Building Energy Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCostBuilding Energy Systems NREL experts

  2. Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings

    SciTech Connect (OSTI)

    Kroposki, B.; Werner, M.; Spikes, A.; Komomua, C.

    2013-01-01T23:59:59.000Z

    This report summarizes the workshop entitled: Integrated Deployment and the Energy Systems Integration Facility. In anticipation of the opening of the ESIF, NREL held the workshop August 21-23, 2012 and invited participants from utilities, government, industry, and academia to discuss renewable integration challenges and discover new ways to meet them by taking advantage of the ESIF's capabilities.

  3. Designing and testing the neutron source deployment system and calibration plan for a dark matter detector

    E-Print Network [OSTI]

    Westerdale, Shawn (Shawn S.)

    2011-01-01T23:59:59.000Z

    In this thesis, we designed and tested a calibration and deployment system for the MiniCLEAN dark matter detector. The deployment system uses a computer controlled winch to lower a canister containing a neutron source into ...

  4. Reed Reactor Facility. Final report

    SciTech Connect (OSTI)

    Frantz, S.G.

    1994-12-31T23:59:59.000Z

    This report discusses the operation and maintenance of the Reed Reactor Facility. The Reed reactor is mostly used for education and train purposes.

  5. Deployment of a dispatchable photovoltaic system: Technical and economic results

    SciTech Connect (OSTI)

    Byrne, J.; Wang, Y.D.; Letendre, S.; Govindarajalu, C. [Univ. of Delaware, Newark, DE (United States). Center for Energy and Environmental Policy; Nigro, R. [Delmarva Power and Light Co., Wilmington, DE (United States); Bottenberg, W. [Delaware Solar Electric Power, Newark, DE (United States)

    1994-12-31T23:59:59.000Z

    This paper discusses the incorporation of PV as a demand-side management (DSM) tool. The valuation of the benefits provided by PV in a DSM role indicates that it is much closer to commercial viability than was thought from economic analyses focusing exclusively on this technology as a supply-side option. However, in order to realize PV`s potential, this technology must be deployed in high-value DSM applications; in particular, applications that promise dispatchable peak-shaving capability. This analysis of the performance of a prototype system installed by Delmarva Power, indicates that small-scale, commercial customer-sited DSM systems incorporating this technology are approaching competitive cost levels.

  6. A Buildings Module for the Stochastic Energy Deployment System

    SciTech Connect (OSTI)

    Lacommare, Kristina S H; Marnay, Chris; Stadler, Michael; Borgeson, Sam; Coffey, Brian; Komiyama, Ryoichi; Lai, Judy

    2008-05-15T23:59:59.000Z

    The U.S. Department of Energy (USDOE) is building a new long-range (to 2050) forecasting model for use in budgetary and management applications called the Stochastic Energy Deployment System (SEDS), which explicitly incorporates uncertainty through its development within the Analytica(R) platform of Lumina Decision Systems. SEDS is designed to be a fast running (a few minutes), user-friendly model that analysts can readily run and modify in its entirety through a visual programming interface. Lawrence Berkeley National Laboratory is responsible for implementing the SEDS Buildings Module. The initial Lite version of the module is complete and integrated with a shared code library for modeling demand-side technology choice developed by the National Renewable Energy Laboratory (NREL) and Lumina. The module covers both commercial and residential buildings at the U.S. national level using an econometric forecast of floorspace requirement and a model of building stock turnover as the basis for forecasting overall demand for building services. Although the module is fundamentally an engineering-economic model with technology adoption decisions based on cost and energy performance characteristics of competing technologies, it differs from standard energy forecasting models by including considerations of passive building systems, interactions between technologies (such as internal heat gains), and on-site power generation.

  7. Reed Reactor Facility Annual Report

    SciTech Connect (OSTI)

    Frantz, Stephen G.

    2000-09-01T23:59:59.000Z

    This is the report of the operations, experiments, modifications, and other aspects of the Reed Reactor Facility for the year.

  8. Representation of Solar Capacity Value in the ReEDS Capacity Expansion Model

    SciTech Connect (OSTI)

    Sigrin, B.; Sullivan, P.; Ibanez, E.; Margolis, R.

    2014-03-01T23:59:59.000Z

    An important issue for electricity system operators is the estimation of renewables' capacity contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to the resource variability. Reliability-based methods, particularly assessment of the Effective Load-Carrying Capacity, are considered to be the most robust and widely-accepted techniques for addressing this resource variability. This report compares estimates of solar PV capacity value by the Regional Energy Deployment System (ReEDS) capacity expansion model against two sources. The first comparison is against values published by utilities or other entities for known electrical systems at existing solar penetration levels. The second comparison is against a time-series ELCC simulation tool for high renewable penetration scenarios in the Western Interconnection. Results from the ReEDS model are found to compare well with both comparisons, despite being resolved at a super-hourly temporal resolution. Two results are relevant for other capacity-based models that use a super-hourly resolution to model solar capacity value. First, solar capacity value should not be parameterized as a static value, but must decay with increasing penetration. This is because -- for an afternoon-peaking system -- as solar penetration increases, the system's peak net load shifts to later in the day -- when solar output is lower. Second, long-term planning models should determine system adequacy requirements in each time period in order to approximate LOLP calculations. Within the ReEDS model we resolve these issues by using a capacity value estimate that varies by time-slice. Within each time period the net load and shadow price on ReEDS's planning reserve constraint signals the relative importance of additional firm capacity.

  9. NREL: Energy Systems Integration Facility - Integrated Deployment Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NREL is spearheadingIntegrated Deployment Workshop

  10. CALIBRATION T. David Reed

    E-Print Network [OSTI]

    Buehrer, R. Michael

    CALIBRATION T. David Reed Extension Agronomist, Tobacco Proper calibration of both pesticide expense of over application. Sprayer Calibration The most convenient sprayer calibration procedure is the "1/128th acre" method. The basic principle is to determine the calibration distance to cover 1/128th

  11. Evaluation of the Deployable Seismic Verification System at the Pinedale Seismic Research Facility

    SciTech Connect (OSTI)

    Carr, D.B.

    1993-08-01T23:59:59.000Z

    The intent of this report is to examine the performance of the Deployable Seismic Verification System (DSVS) developed by the Department of Energy (DOE) through its national laboratories to support monitoring of underground nuclear test treaties. A DSVS was installed at the Pinedale Seismic Research Facility (PSRF) near Boulder, Wyoming during 1991 and 1992. This includes a description of the system and the deployment site. System performance was studied by looking at four areas: system noise, seismic response, state of health (SOH) and operational capabilities.

  12. NUCLEAR NON-PROLIFERATION-TASK 1: Deployable Plume and Aerosol Release Prediction and Tracking System

    SciTech Connect (OSTI)

    John Kleppe, Ph.D., William Norris, Ph.D., Mehdi Etezada, Ph.D., P.E.

    2006-07-19T23:59:59.000Z

    This contract was awarded in response to a proposal in which a deployable plume and aerosol release prediction and tracking system would be designed, fabricated, and tested. The system would gather real time atmospheric data and input it into a real time atmospheric model that could be used for plume predition and tracking. The system would be able to be quickly deployed by aircraft to points of interest or positioned for deployment by vehicles. The system would provide three dimensional (u, v, and w) wind vector data, inversion height measurements, surface wind information, classical weather station data, and solar radiation. The on-board real time computer model would provide the prediction of the behavior of plumes and released aerosols.

  13. Entrapment of the StarClose Vascular Closure System After Attempted Common Femoral Artery Deployment

    SciTech Connect (OSTI)

    Durack, Jeremy C., E-mail: jeremy.durack@ucsf.edu; Thor Johnson, D.; Fidelman, Nicholas; Kerlan, Robert K.; LaBerge, Jeanne M. [University of California, Department of Radiology and Biomedical Imaging (United States)

    2012-08-15T23:59:59.000Z

    A complication of the StarClose Vascular Closure System (Abbott, Des Plaines, IL) after a transarterial hepatic chemoembolization is described. After attempted clip deployment, the entire device became lodged in the tissues overlying the common femoral artery and could not be removed percutaneously. Successful removal of the device required surgical cutdown for removal and arterial repair. Entrapment of the StarClose vascular closure deployment system is a potentially serious complication that has been reported in the Manufacturer and User Facility Device Experience database, but has not been recognized in the literature.

  14. Deploying Server-side File System Monitoring at NERSC

    SciTech Connect (OSTI)

    Uselton, Andrew

    2009-05-01T23:59:59.000Z

    The Franklin Cray XT4 at the NERSC center was equipped with the server-side I/O monitoring infrastructure Cerebro/LMT, which is described here in detail. Insights gained from the data produced include a better understanding of instantaneous data rates during file system testing, file system behavior during regular production time, and long-term average behaviors. Information and insights gleaned from this monitoring support efforts to proactively manage the I/O infrastructure on Franklin. A simple model for I/O transactions is introduced and compared with the 250 million observations sent to the LMT database from August 2008 to February 2009.

  15. Conceptual design analyses for Hanford Site deployable remote spectroscopy systems

    SciTech Connect (OSTI)

    Philipp, B.L.; Reich, F.R.

    1994-09-01T23:59:59.000Z

    This document identifies potential remote, NIR spectroscopic waste surface moisture monitoring system design alternatives to be operated inside one of the Hanford Site, high level, nuclear waste storage tanks. Potential tank waste moisture data impacts from the remote NIR signal transfer through high humidity vapor space is evaluated.

  16. Scalable and fail-safe deployment of the ATLAS Distributed Data Management system Rucio

    E-Print Network [OSTI]

    Lassnig, Mario; The ATLAS collaboration; Barisits, Martin-Stefan; Beermann, Thomas Alfons; Serfon, Cedric; Garonne, Vincent

    2015-01-01T23:59:59.000Z

    This contribution details the deployment of Rucio, the ATLAS Distributed Data Management system. The main complication is that Rucio interacts with a wide variety of external services, and connects globally distributed data centres under different technological and administrative control, at an unprecedented data volume. It is therefore not possibly to create a duplicate instance of Rucio for testing or integration. Every software upgrade or configuration change is thus potentially disruptive and requires fail-safe software and automatic error recovery. Rucio uses a three-layer scaling and mitigation strategy based on quasi-realtime monitoring. This strategy mainly employs independent stateless services, automatic failover, and service migration. The technologies used for deployment and mitigation include OpenStack, Puppet, Graphite, HAProxy, Apache, and nginx. In this contribution, the reasons and design decisions for the deployment, the actual implementation, and an evaluation of all involved services and c...

  17. Scalable and fail-safe deployment of the ATLAS Distributed Data Management system Rucio

    E-Print Network [OSTI]

    Lassnig, Mario; The ATLAS collaboration; Beermann, Thomas Alfons; Barisits, Martin-Stefan; Garonne, Vincent; Serfon, Cedric

    2015-01-01T23:59:59.000Z

    This contribution details the deployment of Rucio, the ATLAS Distributed Data Management system. The main complication is that Rucio interacts with a wide variety of external services, and connects globally distributed data centres under different technological and administrative control, at an unprecedented data volume. It is therefore not possibly to create a duplicate instance of Rucio for testing or integration. Every software upgrade or configuration change is thus potentially disruptive and requires fail-safe software and automatic error recovery. Rucio uses a three-layer scaling and mitigation strategy based on quasi-realtime monitoring. This strategy mainly employs independent stateless services, automatic failover, and service migration. The technologies used for deployment and mitigation include OpenStack, Puppet, Graphite, HAProxy and Apache. In this contribution, the interplay between these component, their deployment, software mitigation, and the monitoring strategy are discussed.

  18. Ontology Technology for the Development and Deployment of Learning Technology Systems -a Survey

    E-Print Network [OSTI]

    Lee, Hyowon

    Ontology Technology for the Development and Deployment of Learning Technology Systems - a Survey is an initiative to bring meaning to the Web. The Semantic Web is based on ontology technology ­ a knowledge five scenarios demonstrating different forms of applications of ontology technologies

  19. A WIRELESS SENSOR NETWORK SYSTEM DEPLOYMENT FOR DETECTING STICK SLIP MOTION IN GLACIERS

    E-Print Network [OSTI]

    Southampton, University of

    A WIRELESS SENSOR NETWORK SYSTEM DEPLOYMENT FOR DETECTING STICK SLIP MOTION IN GLACIERS K. Martinez, jhart@soton.ac.uk Keywords: Glaciers, Environmental sensor networks Abstract The behaviour of glaciers The current understanding of how glaciers and ice sheets respond to climate change is extremely limited

  20. Reed valves for internal combustion engines

    SciTech Connect (OSTI)

    Boyesen, E.

    1987-09-29T23:59:59.000Z

    A two-cycle engine is described comprising a cylinder and a piston working in the cylinder. The engine has a compression chamber below the piston and a fuel intake system including a ported valve seat for delivering fuel into the compression chamber. The cylinder has an exhaust port and a transfer passage for delivering compressed fuel from the compression chamber to the space above the piston, and a reed valve overlying the port in the valve seat and adapted to flex away from the ported seat during the upward stroke of the piston. The reed valve is of multiple layer construction with an outlet layer formed of relatively rigid resin material and an inner layer presented inwardly for contact with the valve seat and formed of relatively flexible temperature-resistant synthetic rubber material. The rubber layer is thinner than the resin layer and the resin and rubber layers are adhesively bonded to each other.

  1. DEVELOPMENT AND DEPLOYMENT OF THE MOBILE ARM RETRIEVAL SYSTEM (MARS) - 12187

    SciTech Connect (OSTI)

    BURKE CA; LANDON MR; HANSON CE

    2012-01-30T23:59:59.000Z

    Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pump (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are being/have been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012.

  2. DEVELOPMENT AND DEPLOYMENT OF THE MOBILE ARM RETRIEVAL SYSTEM (MARS) - 12187

    SciTech Connect (OSTI)

    BURKE CA; LANDON MR; HANSON CE

    2011-11-08T23:59:59.000Z

    Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pump (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are beinglhave been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan [1]. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012.

  3. Development and Deployment of the Mobile Arm Retrieval System (MARS) - 12187

    SciTech Connect (OSTI)

    Burke, Christopher A.; Landon, Matthew R. [Washington River Protection Solutions, Richland, Washington 99352 (United States); Hanson, Carl E. [AREVA Federal Services, Richland, Washington 99352 (United States)

    2012-07-01T23:59:59.000Z

    Washington River Protection Solutions (WRPS) is developing and deploying Mobile Arm Retrieval System (MARS) technologies solutions to support retrieval of radioactive and chemical waste from underground single shell storage tanks (SST) located at the Hanford Site, which is near Richland, Washington. WRPS has developed the MARS using a standardized platform that is capable of deploying multiple retrieval technologies. To date, WRPS, working with their mentor-protege company, Columbia Energy and Environmental Services (CEES), has developed two retrieval mechanisms, MARS-Sluicing (MARS-S) and MARS-Vacuum (MARS-V). MARS-S uses pressurized fluids routed through spray nozzles to mobilize waste materials to a centrally located slurry pump (deployed in 2011). MARS-V uses pressurized fluids routed through an eductor nozzle. The eductor nozzle allows a vacuum to be drawn on the waste materials. The vacuum allows the waste materials to be moved to an in-tank vessel, then extracted from the SST and subsequently pumped to newer and safer double shell tanks (DST) for storage until the waste is treated for disposal. The MARS-S system is targeted for sound SSTs (i.e., non leaking tanks). The MARS-V is targeted for assumed leaking tanks or those tanks that are of questionable integrity. Both versions of MARS are being/have been developed in compliance with WRPS's TFC-PLN-90, Technology Development Management Plan [1]. TFC-PLN-90 includes a phased approach to design, testing, and ultimate deployment of new technologies. The MARS-V is scheduled to be deployed in tank 241-C-105 in late 2012. (authors)

  4. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS--II: EXPRESS BRIEFS, VOL. 53, NO. 11, NOVEMBER 2006 1245 Area-Efficient VLSI Design of ReedSolomon

    E-Print Network [OSTI]

    Hung, Shih-Hao

    architecture of the RS decoder by using a novel just-in-time folding modified Euclidean algorithm (JIT-FMEA). The JIT-FMEA VLSI architecture can greatly reduce the hardware complexity by about 50% compared-in-time folding modified Euclidean algorithm (JIT-FMEA), key equation solver (KES), Reed­Solomon (RS) codec, 10

  5. Reed-Joseph International Company

    E-Print Network [OSTI]

    is offering field downloadable GPS/VHF logging collars and Solar Powered GPS/VHF backpack loggers for birds of battery powered and solar powered PTTs in a wide range of sizes, exclusively for birds. We will startReed-Joseph International Company 55 YEARS OF EXCELLENCE IN BIRD AND WILDLIFE CONTROL THE U

  6. MHD compressor---expander conversion system integrated with GCR inside a deployable reflector

    SciTech Connect (OSTI)

    Tuninetti, G. (Ansaldo S.p.A., Genoa (Italy). Research Div.); Botta, E.; Criscuolo, C.; Riscossa, P. (Ansaldo S.p.A., Genoa (Italy). Nuclear Div.); Giammanco, F. (Pisa Univ. (Italy). Dipt. di Fisica); Rosa-Clot, M. (Florence Univ. (Italy). Dipt. di Fisica)

    1989-04-20T23:59:59.000Z

    This work originates from the proposal MHD Compressor-Expander Conversion System Integrated with a GCR Inside a Deployable Reflector''. The proposal concerned an innovative concept of nuclear, closed-cycle MHD converter for power generation on space-based systems in the multi-megawatt range. The basic element of this converter is the Power Conversion Unit (PCU) consisting of a gas core reactor directly coupled to an MHD expansion channel. Integrated with the PCU, a deployable reflector provides reactivity control. The working fluid could be either uranium hexafluoride or a mixture of uranium hexafluoride and helium, added to enhance the heat transfer properties. The original Statement of Work, which concerned the whole conversion system, was subsequently redirected and focused on the basic mechanisms of neutronics, reactivity control, ionization and electrical conductivity in the PCU. Furthermore, the study was required to be inherently generic such that the study was required to be inherently generic such that the analysis an results can be applied to various nuclear reactor and/or MHD channel designs''.

  7. Overview of Development and Deployment of Codes, Standards and Regulations Affecting Energy Storage System Safety in the United States

    SciTech Connect (OSTI)

    Conover, David R.

    2014-08-22T23:59:59.000Z

    This report acquaints stakeholders and interested parties involved in the development and/or deployment of energy storage systems (ESS) with the subject of safety-related codes, standards and regulations (CSRs). It is hoped that users of this document gain a more in depth and uniform understanding of safety-related CSR development and deployment that can foster improved communications among all ESS stakeholders and the collaboration needed to realize more timely acceptance and approval of safe ESS technology through appropriate CSR.

  8. Efficient Detection on Stochastic Faults in PLC Based Automated Assembly Systems With Novel Sensor Deployment and Diagnoser Design

    E-Print Network [OSTI]

    Wu, Zhenhua

    2012-07-16T23:59:59.000Z

    Programming FMEA Failure Mode Effect Analysis AHP Analytical Hierarchy Process MILP Mixed Integer Linear Programming IPN Interpreted Petri Net CTPN Colored Timed Petri Net FPN Fuzzy Petri Net MOM Mean of Maximum COA Center of Area RTFPN Real Time... and target multiple objectives; 2) design a Petri net (PN) diagnoser for detecting stochastic faults in realtime; and 3) evaluate the proposed sensor deployment and diagnoser in a PLC controlled manufacturing system. FMEA Sensor Deployment Model...

  9. An Integrated RFID and Barcode Tagged Item Inventory System for Deployment at New Brunswick Laboratory

    SciTech Connect (OSTI)

    Younkin, James R [ORNL; Kuhn, Michael J [ORNL; Gradle, Colleen [New Brunswick Laboratory, Argonne, IL; Preston, Lynne [U.S. Department of Energy, Office of Health, Safety and Security; Thomas, Brigham B. [ORNL; Laymance, Leesa K [ORNL; Kuziel, Ron [DOE SC - Chicago Office

    2012-01-01T23:59:59.000Z

    New Brunswick Laboratory (NBL) has a numerous inventory containing thousands of plutonium and uranium certified reference materials. The current manual inventory process is well established but is a lengthy process which requires significant oversight and double checking to ensure correctness. Oak Ridge National Laboratory has worked with NBL to develop and deploy a new inventory system which utilizes handheld computers with barcode scanners and radio frequency identification (RFID) readers termed the Tagged Item Inventory System (TIIS). Certified reference materials are identified by labels which incorporate RFID tags and barcodes. The label printing process and RFID tag association process are integrated into the main desktop software application. Software on the handheld computers syncs with software on designated desktop machines and the NBL inventory database to provide a seamless inventory process. This process includes: 1) identifying items to be inventoried, 2) downloading the current inventory information to the handheld computer, 3) using the handheld to read item and location labels, and 4) syncing the handheld computer with a designated desktop machine to analyze the results, print reports, etc. The security of this inventory software has been a major concern. Designated roles linked to authenticated logins are used to control access to the desktop software while password protection and badge verification are used to control access to the handheld computers. The overall system design and deployment at NBL will be presented. The performance of the system will also be discussed with respect to a small piece of the overall inventory. Future work includes performing a full inventory at NBL with the Tagged Item Inventory System and comparing performance, cost, and radiation exposures to the current manual inventory process.

  10. Solar Deployment System (SolarDS) Model: Documentation and Sample Results

    SciTech Connect (OSTI)

    Denholm, P.; Drury, E.; Margolis, R.

    2009-09-01T23:59:59.000Z

    The Solar Deployment System (SolarDS) model is a bottom-up, market penetration model that simulates the potential adoption of photovoltaics (PV) on residential and commercial rooftops in the continental United States through 2030. NREL developed SolarDS to examine the market competitiveness of PV based on regional solar resources, capital costs, electricity prices, utility rate structures, and federal and local incentives. The model uses the projected financial performance of PV systems to simulate PV adoption for building types and regions then aggregates adoption to state and national levels. The main components of SolarDS include a PV performance simulator, a PV annual revenue calculator, a PV financial performance calculator, a PV market share calculator, and a regional aggregator. The model simulates a variety of installed PV capacity for a range of user-specified input parameters. PV market penetration levels from 15 to 193 GW by 2030 were simulated in preliminary model runs. SolarDS results are primarily driven by three model assumptions: (1) future PV cost reductions, (2) the maximum PV market share assumed for systems with given financial performance, and (3) PV financing parameters and policy-driven assumptions, such as the possible future cost of carbon emissions.

  11. Field deployments of the MESSAGE system for environmental Draft submission to TEC December Issue (MESSAGE Paper 2)

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    monitoring and management of air pollution from road traffic. It is a large project involving five the relationships between transport and air pollution. Three different sensor systems have been developed to allow and air pollution. Where appropriate, field trials were supported by additional deployment of conventional

  12. Abstract--The deployment of IEC61850 standard in the world of substation automation system brings to the use of

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Abstract-- The deployment of IEC61850 standard in the world of substation automation system brings to the use of specific strategies for architecture testing. To validate IEC61850 architecture, the first step. The second step consists in validating IEC61850 applications compliance according to the project

  13. Deployable structures

    E-Print Network [OSTI]

    Hernández Merchan, Carlos Henrique

    1987-01-01T23:59:59.000Z

    This thesis has the purpose of describing the meaning and applications of deployable structures (making emphasis in the scissor-hinged and sliding mechanisms.) and the development of new geometries, details, and mechanisms ...

  14. Analyzing the Deployment of Large Amounts of Offshore Wind to Design an Offshore Transmission Grid in the United States: Preprint

    SciTech Connect (OSTI)

    Ibanez, E.; Mai, T.; Coles, L.

    2012-09-01T23:59:59.000Z

    This paper revisits the results from the U.S. Department of Energy's '20% Wind Energy By 2030' study, which envisioned that 54 GW of offshore wind would be installed by said year. The analysis is conducted using the Regional Energy Deployment System (ReEDS), a capacity expansion model developed by the National Renewable Energy Laboratory. The model is used to optimize the deployment of the 54 GW of wind capacity along the coasts and lakes of the United States. The graphical representation of the results through maps will be used to provide a qualitative description for planning and designing an offshore grid. ReEDS takes into account many factors in the process of siting offshore wind capacity, such as the quality of the resource, capital and O&M costs, interconnection costs, or variability metrics (wind capacity value, forecast error, expected curtailment). The effect of these metrics in the deployment of offshore wind will be analyzed through examples in the results.

  15. Development and deployment of advanced corrosion monitoring systems for high-level waste tanks.

    SciTech Connect (OSTI)

    Terry, M. T. (Michael T.); Edgemon, G. L. (Glenn L.); Mickalonis, J. I. (John I.); Mizia, R. E. (Ronald E.)

    2002-01-01T23:59:59.000Z

    This paper describes the results of a collaborative technology development program, sponsored by the Tanks Focus Area, to use electrochemical noise (EN) for corrosion monitoring in underground storage tanks. These tanks, made of carbon or stainless steels, contain high-level radioactive liquid waste (HLW) generated by weapons production or radioactive liquid waste from nuclear fuel reprocessing activities at several Department of Energy (DOE) sites. The term EN is used to describe low frequency fluctuations in current and voltage measurements associated with corrosion. In their most basic form, EN-based corrosion monitoring systems measure and record these fluctuations over time from electrodes immersed in the environment of interest - in this case, radioactive tank waste. The resulting EN signals have characteristic patterns for different corrosion mechanisms. In recent years, engineers and scientists from several DOE sites, in collaboration with several private companies, have conducted laboratory studies and field applications to correlate the EN signals with corrosion mechanisms active in the radioactive waste tanks. The participating DOE sites are Hanford, Savannah River, Oak Ridge Reservation and the Idaho National Engineering and Environmental Laboratory. The commercial vendors have included HiLine Engineering and Fabrication, Inc., EIC Laboratories, Inc., and M A Technologies. Successful deployment of the EN technology will yield improved information of waste tank corrosion conditions, better tank management, and lower overall cost.

  16. Development and Deployment of Advanced Corrosion Monitoring Systems for High-Level Waste Tanks

    SciTech Connect (OSTI)

    Terry, M. T.; Edgemon, G. L.; Mickalonis, J. I.; Mizia, R. E.

    2002-02-26T23:59:59.000Z

    This paper describes the results of a collaborative technology development program, sponsored by the Tanks Focus Area, to use electrochemical noise (EN) for corrosion monitoring in underground storage tanks. These tanks, made of carbon or stainless steels, contain high-level radioactive liquid waste (HLW) generated by weapons production or radioactive liquid waste from nuclear fuel reprocessing activities at several Department of Energy (DOE) sites. The term EN is used to describe low frequency fluctuations in current and voltage measurements associated with corrosion. In their most basic form, EN-based corrosion monitoring systems measure and record these fluctuations over time from electrodes immersed in the environment of interest--in this case, radioactive tank waste. The resulting EN signals have characteristic patterns for different corrosion mechanisms. In recent years, engineers and scientists from several DOE sites, in collaboration with several private companies, have conducted laboratory studies and field applications to correlate the EN signals with corrosion mechanisms active in the radioactive waste tanks. The participating DOE sites are Hanford, Savannah River, Oak Ridge Reservation and the Idaho National Engineering and Environmental Laboratory. The commercial vendors have included HiLine Engineering and Fabrication, Inc., EIC Laboratories, Inc., and AEA Technologies. Successful deployment of the EN technology will yield improved information of waste tank corrosion conditions, better tank management, and lower overall cost.

  17. Efficient algebraic soft-decision decoding of Reed-Solomon codes

    E-Print Network [OSTI]

    Ma, Jun

    2007-01-01T23:59:59.000Z

    for an (255,239) Reed-Solomon Code . . Introduction andfor a (458, 410) Reed-Solomon Code . . . . . . . .Reed-Solomon Code . . . . . . . . . . . . . . . . . . . . .

  18. Concentrating Solar Deployment System (CSDS) -- A New Model for Estimating U.S. Concentrating Solar Power (CSP) Market Potential: Preprint

    SciTech Connect (OSTI)

    Blair, N.; Mehos, M.; Short, W.; Heimiller, D.

    2006-04-01T23:59:59.000Z

    This paper presents the Concentrating Solar Deployment System Model (CSDS). CSDS is a multiregional, multitime-period, Geographic Information System (GIS), and linear programming model of capacity expansion in the electric sector of the United States. CSDS is designed to address the principal market and policy issues related to the penetration of concentrating solar power (CSP) electric-sector technologies. This paper discusses the current structure, capabilities, and assumptions of the model. Additionally, results are presented for the impact of continued research and development (R&D) spending, an extension to the investment tax credit (ITC), and use of a production tax credit (PTC). CSDS is an extension of the Wind Deployment System (WinDS) model created at the National Renewable Energy Laboratory (NREL). While WinDS examines issues related to wind, CSDS is an extension to analyze similar issues for CSP applications. Specifically, a detailed representation of parabolic trough systems with thermal storage has been developed within the existing structure.

  19. DEVELOPING THE NATIONAL GEOTHERMAL DATA SYSTEM ADOPTION OF CKAN FOR DOMESTIC & INTERNATIONAL DATA DEPLOYMENT

    SciTech Connect (OSTI)

    Clark, Ryan J. [Arizona Geological Survey; Kuhmuench, Christoph [Siemens Corporation; Richard, Stephen M. [Arizona Geological Survey

    2013-01-01T23:59:59.000Z

    The National Geothermal Data System (NGDS) De- sign and Testing Team is developing NGDS software currently referred to as the “NGDS Node-In-A-Box”. The software targets organizations or individuals who wish to host at least one of the following: • an online repository containing resources for the NGDS; • an online site for creating metadata to register re- sources with the NGDS • NDGS-conformant Web APIs that enable access to NGDS data (e.g., WMS, WFS, WCS); • NDGS-conformant Web APIs that support dis- covery of NGDS resources via catalog service (e.g. CSW) • a web site that supports discovery and under- standing of NGDS resources A number of different frameworks for development of this online application were reviewed. The NGDS Design and Testing Team determined to use CKAN (http://ckan.org/), because it provides the closest match between out of the box functionality and NGDS node-in-a-box requirements. To achieve the NGDS vision and goals, this software development project has been inititated to provide NGDS data consumers with a highly functional inter- face to access the system, and to ease the burden on data providers who wish to publish data in the sys- tem. It is important to note that this software package constitutes a reference implementation. The NGDS software is based on open standards, which means other server software can make resources available, and other client applications can utilize NGDS data. A number of international organizations have ex- pressed interest in the NGDS approach to data access. The CKAN node implementation can provide a sim- ple path for deploying this technology in other set- tings.

  20. Fukushima Nuclear Crisis Recovery: A Modular Water Treatment System Deployed in Seven Weeks - 12489

    SciTech Connect (OSTI)

    Denton, Mark S.; Mertz, Joshua L. [Kurion, Inc., P.O. Box 5901, Oak Ridge, Tennessee 37831 (United States); Bostick, William D. [Materials and Chemistry Laboratory, Inc. (MCL) ETTP, Building K-1006, 2010 Highway 58, Suite 1000, Oak Ridge, Tennessee 37830 (United States)

    2012-07-01T23:59:59.000Z

    On March 11, 2011, the magnitude 9.0 Great East Japan earthquake, Tohoku, hit off the Fukushima coast of Japan. This was one of the most powerful earthquakes in recorded history and the most powerful one known to have hit Japan. The ensuing tsunami devastated a huge area resulting in some 25,000 persons confirmed dead or missing. The perfect storm was complete when the tsunami then found the four reactor, Fukushima-Daiichi Nuclear Station directly in its destructive path. While recovery systems admirably survived the powerful earthquake, the seawater from the tsunami knocked the emergency cooling systems out and did extensive damage to the plant and site. Subsequent hydrogen generation caused explosions which extended this damage to a new level and further flooded the buildings with highly contaminated water. Some 2 million people were evacuated from a fifty mile radius of the area and evaluation and cleanup began. Teams were assembled in Tokyo the first week of April to lay out potential plans for the immediate treatment of some 63 million gallons (a number which later exceeded 110 million gallons) of highly contaminated water to avoid overflow from the buildings as well as supply the desperately needed clean cooling water for the reactors. A system had to be deployed with a very brief cold shake down and hot startup before the rainy season started in early June. Joined by team members Toshiba (oil removal system), AREVA (chemical precipitation system) and Hitachi-GE (RO system), Kurion (cesium removal system following the oil separator) proposed, designed, fabricated, delivered and started up a one of a kind treatment skid and over 100 metric tons of specially engineered and modified Ion Specific Media (ISM) customized for this very challenging seawater/oil application, all in seven weeks. After a very short cold shake down, the system went into operation on June 17, 2011 on actual waste waters far exceeding 1 million Bq/mL in cesium and many other isotopes. One must remember that, in addition to attempting to do isotope removal in the competition of seawater (as high as 18,000 ppm sodium due to concentration), some 350,000 gallons of turbine oil was dispersed into the flooded buildings as well. The proposed system consisted of a 4 guard vessel skid for the oil and debris, 4 skids containing 16 cesium towers in a lead-lag layout with removable vessels (sent to an interim storage facility), and a 4 polishing vessel skid for iodine removal and trace cesium levels. At a flow rate of at least 220 gallons per minute, the system has routinely removed over 99% of the cesium, the main component of the activity, since going on line. To date, some 50% of the original activity has been removed and stabilized and cold shutdown of the plant was announced on December 10, 2011. In March and April alone, 10 cubic feet of Engineered Herschelite was shipped to Seabrook Nuclear Power Plant, NPP, to support the April 1, 2011 outage cleanup; 400 cubic feet was shipped to Oak Ridge National Laboratory (ORNL) for strontium (Sr-90) ground water remediation; and 6000 cubic feet (100 metric tons, MT, or 220,400 pounds) was readied for the Fukushima Nuclear Power Station with an additional 100 MT on standby for replacement vessels. This experience and accelerated media production in the U.S. bore direct application to what was to soon be used in Fukushima. How such a sophisticated and totally unique system and huge amount of media could be deployable in such a challenging and changing matrix, and in only seven weeks, is outlined in this paper as well as the system and operation itself. As demonstrated herein, all ten major steps leading up to the readiness and acceptance of a modular emergency technology recovery system were met and in a very short period of time, thus utilizing three decades of experience to produce and deliver such a system literally in seven weeks: - EPRI - U.S. Testing and Experience Leading to Introduction to EPRI - Japan and Subsequently TEPCO Emergency Meetings - Three Mile Island (TMI) Media and Vitrification Experience

  1. R&D and deployment valuation of intelligent transportation systems : a case example of the intersection collision avoidance systems

    E-Print Network [OSTI]

    Hodota, Kenichi

    2006-01-01T23:59:59.000Z

    Compared with investments in the conventional infrastructure, those in Intelligent Transportation Technology (ITS) include various uncertainties. Because deployment of ITS requires close public-private partnership, projects ...

  2. Final Technical Report: Hawaii Hydrogen Center for Development and Deployment of Distributed Energy Systems

    SciTech Connect (OSTI)

    Rocheleau, Richard E.

    2008-09-30T23:59:59.000Z

    Hydrogen power park experiments in Hawai‘i produced real-world data on the performance of commercialized electrochemical components and power systems integrating renewable and hydrogen technologies. By analyzing the different losses associated with the various equipment items involved, this work identifies the different improvements necessary to increase the viability of these technologies for commercial deployment. The stand-alone power system installed at Kahua Ranch on the Big Island of Hawaii required the development of the necessary tools to connect, manage and monitor such a system. It also helped the electrolyzer supplier to adapt its unit to the stand-alone power system application. Hydrogen fuel purity assessments conducted at the Hawai‘i Natural Energy Institute (HNEI) fuel cell test facility yielded additional knowledge regarding fuel cell performance degradation due to exposure to several different fuel contaminants. In addition, a novel fitting strategy was developed to permit accurate separation of the degradation of fuel cell performance due to fuel impurities from other losses. A specific standard MEA and a standard flow field were selected for use in future small-scale fuel cell experiments. Renewable hydrogen production research was conducted using photoelectrochemical (PEC) devices, hydrogen production from biomass, and biohydrogen analysis. PEC device activities explored novel configurations of ‘traditional’ photovoltaic materials for application in high-efficiency photoelectrolysis for solar hydrogen production. The model systems investigated involved combinations of copper-indium-gallium-diselenide (CIGS) and hydrogenated amorphous silicon (a-Si:H). A key result of this work was the establishment of a robust “three-stage” fabrication process at HNEI for high-efficiency CIGS thin film solar cells. The other key accomplishment was the development of models, designs and prototypes of novel ‘four-terminal’ devices integrating high-efficiency CIGS and a-Si:H with operating features compatible with high-efficiency photoelectrochemical (PEC) water-splitting. The objective of one activity under the hydrogen production from biomass task was to conduct parametric testing of the Pearson gasifier and to determine the effects of gasifier operating conditions on the gas yields and quality. The hydrogen yield from this gasifier was evaluated in a parametric test series over a range of residence times from 0.8 to 2.2 seconds. H2 concentrations as high as 55% (volume) were measured in the product gas at the longer residence times and this corresponds to a hydrogen yield of 90 kg per tonne of bagasse without gas upgrading. The objective of another activity was to develop hot gas clean-up capabilities for the HNEI gasifier test facility to support hydrogen-from-biomass research. The product gas stream at the outlet of the hot gas filter was characterized for concentrations of permanent gas species and contaminants. Biomass feedstock processing activity included a preliminary investigation into methods for processing sugar cane trash at the Puunene Sugar Factory on the island of Maui, Hawaii. The objective of the investigation was to explore treatment methods that would enable the successful use of cane trash as fuel for the production of hydrogen via gasification. Analyses were completed for the technical and economic feasibility of producing biofuel from photosynthetic marine microbes on a commercial scale. Results included estimates for total costs, energy efficiency, and return on investment. The biohydrogen team undertook a comprehensive review of the field and came to what is considered a realistic conclusion. To summarize, continued research is recommended in the fundamentals of the science related to genetic engineering and specific topics to cover knowledge gaps. In the meantime, the team also advocates continued development of related processes which can be linked to pollution control and other real world applications. The extra revenues hydrogen can provide to these multi-product systems can

  3. SpyFeet: An Exercise RPG Aaron A. Reed, Ben Samuel, Anne Sullivan, Ricky Grant, April Grow, Justin Lazaro,

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    SpyFeet: An Exercise RPG Aaron A. Reed, Ben Samuel, Anne Sullivan, Ricky Grant, April Grow, Justin & Natural Language and Dialogue Systems Lab University of California, Santa Cruz {aareed,bsamuel,anne,rgrant

  4. Implications of a PTC Extension on U.S. Wind Deployment

    SciTech Connect (OSTI)

    Lantz, E.; Steinberg, D.; Mendelsohn, M.; Zinaman, O.; James, T.; Porro, G.; Hand, M.; Mai, T.; Logan, J.; Heeter, J.; Bird, L.

    2014-04-01T23:59:59.000Z

    This analysis explores the potential effects of wind production tax credit expiration and various extension scenarios on future wind deployment with the Regional Energy Deployment System (ReEDS), a model of the U.S. electricity sector. The analysis does not estimate the potential implications on government tax revenue associated with the PTC. Key findings include: Under a scenario in which the PTC is not extended and all other policies remain unchanged, wind capacity additions are expected to be between 3 and 5 GW per year from 2013-2020; PTC extension options that ramp-down from the current level to zero-credit by year-end 2022 appear to be insufficient to support deployment at the recent historical average; Extending the PTC at its historical level may provide the best opportunity to support deployment consistent with recent levels across a range of potential market conditions; it therefore may also provide the best opportunity to sustain wind power installation and manufacturing sector at current levels.

  5. Market and policy barriers to energy storage deployment : a study for the energy storage systems program.

    SciTech Connect (OSTI)

    Bhatnagar, Dhruv; Currier, Aileen B.; Hernandez, Jacquelynne; Ma, Ookie [U.S. Department of Energy, Washington, D.C.; Kirby, Brendan [U.S. Department of Energy, Washington, D.C.

    2013-09-01T23:59:59.000Z

    Electric energy storage technologies have recently been in the spotlight, discussed as essential grid assets that can provide services to increase the reliability and resiliency of the grid, including furthering the integration of variable renewable energy resources. Though they can provide numerous grid services, there are a number of factors that restrict their current deployment. The most significant barrier to deployment is high capital costs, though several recent deployments indicate that capital costs are decreasing and energy storage may be the preferred economic alternative in certain situations. However, a number of other market and regulatory barriers persist, limiting further deployment. These barriers can be categorized into regulatory barriers, market (economic) barriers, utility and developer business model barriers, crosscutting barriers and technology barriers. This report, through interviews with stakeholders and review of regulatory filings in four regions roughly representative of the United States, identifies the key barriers restricting further energy storage development in the country. The report also includes a discussion of possible solutions to address these barriers and a review of initiatives around the country at the federal, regional and state levels that are addressing some of these issues. Energy storage could have a key role to play in the future grid, but market and regulatory issues have to be addressed to allow storage resources open market access and compensation for the services they are capable of providing. Progress has been made in this effort, but much remains to be done and will require continued engagement from regulators, policy makers, market operators, utilities, developers and manufacturers.

  6. Recursive error correction for general Reed-Muller codes

    E-Print Network [OSTI]

    Dumer, I; Shabunov, K

    2006-01-01T23:59:59.000Z

    for low-rate Reed-Muller codes,” IEEE Trans. Info. Theory,of low-rate Reed-Muller codes,” Proc. 9 th All-Union Conf.decoding of u|u + v| codes,” IEEE Selected Areas Commun. ,

  7. Acting Biomass Program Manager Dr. Valerie Reed to Host Live...

    Broader source: Energy.gov (indexed) [DOE]

    December 16th, the Energy Department (@energy) will be hosting a live Twitter Q&A on biofuels with Dr. Valerie Reed, Acting Manager of the Biomass Program. Dr. Reed holds a Ph. D....

  8. OTEC-1 Power System Test Program: test plan for first deployment

    SciTech Connect (OSTI)

    None

    1980-03-01T23:59:59.000Z

    This report describes in detail all tests planned for the first eight-month deployment of OTEC-1, a test facility constructed by the US Department of Energy in order to test heat exchangers for closed-cycle power plants using ocean thermal energy. Tests to be performed during the first-deployment period are aimed primarily at determining (1) the effectiveness of countermeasures in preventing biofouling of the heat exchanters, (2) the extent of environmental impacts associated with operation of an OTEC facility, and (3) the performance of a 1-MWe, titanium shell-and-tube evaporator and condenser pair. The condenser to be tested has plain tubes, and the evaporator employs the Linde High Flux surface on the working-fluid (ammonia) side to enhance the heat-transfer rate. This plan provides a statement of the objectives and priorities of the test program, describes the test equipment, gives a detailed account of all tests to be performed and the test schedule, and discusses provisions for management of the test program.

  9. Technical Feasibility Study for Deployment of Ground-Source Heat Pump Systems: Portsmouth Naval Shipyard -- Kittery, Maine

    SciTech Connect (OSTI)

    Hillesheim, M.; Mosey, G.

    2014-11-01T23:59:59.000Z

    The U.S. Environmental Protection Agency (EPA) Office of Solid Waste and Emergency Response, in accordance with the RE-Powering America's Lands initiative, engaged the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to conduct feasibility studies to assess the viability of developing renewable energy generating facilities on contaminated sites. Portsmouth Naval Shipyard (PNSY) is a United States Navy facility located on a series of conjoined islands in the Piscataqua River between Kittery, ME and Portsmouth, NH. EPA engaged NREL to conduct a study to determine technical feasibility of deploying ground-source heat pump systems to help PNSY achieve energy reduction goals.

  10. Training for Emergencies Panel: Chris Reed

    E-Print Network [OSTI]

    Training for Emergencies Panel: Chris Reed Ben Berman Immanuel Barshi It's very important to have pilots sharing ideas with other instructor pilots. IB: In aviation there is a lot of mentor training. Instructor pilots are not trained trainers; they are aviators who are providing training. When things

  11. Fusion Power Deployment

    SciTech Connect (OSTI)

    J.A. Schmidt; J.M. Ogden

    2002-02-06T23:59:59.000Z

    Fusion power plants could be part of a future portfolio of non-carbon dioxide producing energy supplies such as wind, solar, biomass, advanced fission power, and fossil energy with carbon dioxide sequestration. In this paper, we discuss key issues that could impact fusion energy deployment during the last half of this century. These include geographic issues such as resource availability, scale issues, energy storage requirements, and waste issues. The resource needs and waste production associated with fusion deployment in the U.S. should not pose serious problems. One important feature of fusion power is the fact that a fusion power plant should be locatable within most local or regional electrical distribution systems. For this reason, fusion power plants should not increase the burden of long distance power transmission to our distribution system. In contrast to fusion power, regional factors could play an important role in the deployment of renewable resources such as wind, solar and biomass or fossil energy with CO2 sequestration. We examine the role of these regional factors and their implications for fusion power deployment.

  12. LARGE-SCALE DEMONSTRATION AND DEPLOYMENT PROJECT-TECHNOLOGY INFORMATION SYSTEM (LSDDP-TIS)

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.

    1999-01-01T23:59:59.000Z

    In recent years, an increasing demand for remediation technologies has fueled rapid growth in the D&D technologies. The D&D project managers are now faced with the task of selecting from among the many commercially available and innovative technologies, the most appropriate technology, or combination of technologies, that will address their specific D&D needs. The DOE's Office of Science and Technology (OST) sponsored the Large-Scale Demonstration and Deployment Projects (LSDDP) to demonstrate improved and innovative technologies that are potentially beneficial to DOE's environmental project. To date, three LSDDPS have been conducted at DOE's nuclear production and research facilities at the Fernald Environmental Management Project--Plant-1 (FEMP), Chicago Pile-5 Research Reactor (CP-5), and Hanford Production Reactor 105-C, Now four new LSDDPS have been launched at the Los Alamos National Laboratory (LANL), Idaho National Engineering and Environmental Laboratory (INEEL), Savannah River Site (SRS), and Mound Environmental Management Project (MEMP). In the LSDDPS, an extensive search is first conducted to identify candidate technologies that can potentially address the identified problems The candidate technologies then go through a screening process to select those technologies with the best potential for addressing remediation problems at the LSDDP site as well as project sites across the DOE complex. This selection process can be overwhelming and time-consuming. The result is that D&D project managers for the new LSDDPS are challenged to avoid duplication of demonstrated technologies.

  13. Rapid Deployment Drilling System for on-site inspections under a Comprehensive Test Ban Preliminary Engineering Design

    SciTech Connect (OSTI)

    Maurer, W.C.; Deskins, W.G.; McDonald, W.J.; Cohen, J.H. [Maurer Engineering, Inc., Houston, TX (United States); Heuze, F.E.; Butler, M.W. [Lawrence Livermore National Lab., CA (United States)

    1996-09-01T23:59:59.000Z

    While not a new drilling technology, coiled-tubing (CT) drilling continues to undergo rapid development and expansion, with new equipment, tools and procedures developed almost daily. This project was undertaken to: analyze available technological options for a Rapid Deployment Drilling System (RDDS) CT drilling system: recommend specific technologies that best match the requirements for the RDDS; and highlight any areas where adequate technological solutions are not currently available. Postshot drilling is a well established technique at the Nevada Test Site (NTS). Drilling provides essential data on the results of underground tests including obtaining samples for the shot zone, information on cavity size, chimney dimensions, effects of the event on surrounding material, and distribution of radioactivity.

  14. Optimization of Concurrent Deployments of the Juvenile Salmon Acoustic Telemetry System and Other Hydroacoustic Equipment at John Day Dam

    SciTech Connect (OSTI)

    Ploskey, Gene R.; Hughes, James S.; Khan, Fenton; Kim, Jina; Lamarche, Brian L.; Johnson, Gary E.; Choi, Eric Y.; Faber, Derrek M.; Wilberding, Matthew C.; Deng, Zhiqun; Weiland, Mark A.; Zimmerman, Shon A.; Fischer, Eric S.; Cushing, Aaron W.

    2008-09-01T23:59:59.000Z

    The purpose of this report is to document the results of the acoustic optimization study conducted at John Day Dam during January and February 2008. The goal of the study was to optimize performance of the Juvenile Salmon Acoustic Telemetry System (JSATS) by determining deployment and data acquisition methods to minimize electrical and acoustic interference from various other acoustic sampling devices. Thereby, this would allow concurrent sampling by active and passive acoustic methods during the formal evaluations of the prototype surface flow outlets at the dam during spring and summer outmigration seasons for juvenile salmonids. The objectives for the optimization study at John Day Dam were to: 1. Design and test prototypes and provide a total needs list of pipes and trolleys to deploy JSATS hydrophones on the forebay face of the powerhouse and spillway. 2. Assess the effect on mean percentage decoded of JSATS transmissions from tags arrayed in the forebay and detected on the hydrophones by comparing: turbine unit OFF vs. ON; spill bay OPEN vs. CLOSED; dual frequency identification sonar (DIDSON) and acoustic Doppler current profiler (ADCP) both OFF vs. ON at a spill bay; and, fixed-aspect hydroacoustic system OFF vs. ON at a turbine unit and a spill bay. 3. Determine the relationship between fixed-aspect hydroacoustic transmit level and mean percentage of JSATS transmissions decoded. The general approach was to use hydrophones to listen for transmissions from JSATS tags deployed in vertical arrays in a series perpendicular to the face of the dam. We used acoustic telemetry equipment manufactured by Technologic and Sonic Concepts. In addition, we assessed old and new JSATS signal detectors and decoders and two different types of hydrophone baffling. The optimization study consisted of a suite of off/on tests. The primary response variable was mean percentage of tag transmissions decoded. We found that there was no appreciable adverse effect on mean percentage decoded for JSATS transmitters from: turbine operations; spillway operations; DIDSON/ADCP acoustic energy; and PAS hydroacoustic systems at transmit level of -12 dB, although there was a significant impact at all higher transmit levels (-11 to -6 dB). The main conclusion from this optimization study is that valid JSATS telemetry data can be collected simultaneously with a DIDSON/ADCP and a PAS hydroacoustic system at transmit level -12 dB. Multiple evaluation tools should be considered to increase the robustness and thoroughness of future fish passage evaluations at John Day and other dams.

  15. Treatment of septage in sludge drying reed beds: a case study on pilot-scale beds

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Treatment of septage in sludge drying reed beds: a case study on pilot-scale beds S. Troesch***, A systems by local authorities. This will result in a large increase of the quantity of sludge from septic to treat this sludge because they may have reached their nominal load or they are not so numerous in rural

  16. Direct Reed-Muller Transform of Digital Logic Netlists Mitchell A. Thornton and Jennifer Dworak

    E-Print Network [OSTI]

    Thornton, Mitchell

    -output relation of a linear system is a mature idea and is heavily used in electrical circuit analysis that enables frequency domain analysis of digital logic circuits through the use of the Reed-Muller transform applied directly upon a logic circuit netlist. The technique is based on formulating a linear algebraic

  17. Evaluating Future Standards and Codes with a Focus on High Penetration Photovoltaic (HPPV) System Deployment (Poster)

    SciTech Connect (OSTI)

    Coddington, M.; Kroposki, B.; Basso, T.; Lynn, K.

    2010-12-01T23:59:59.000Z

    Poster displaying solutions for evaluating future standards and codes for high penetration photovoltaic (HPPV) systems.

  18. Air quality and Intelligent Transportation Systems : understanding Integrated Innovation, Deployment and Adaptation of Public Technologies

    E-Print Network [OSTI]

    Dodder, Rebecca Susanne

    2006-01-01T23:59:59.000Z

    During the past two decades, Intelligent Transportation Systems (ITS) have provided transportation organizations with increasingly advanced tools both to operate and manage systems in real-time. At the same time, federal ...

  19. A Rapidly Deployable Manipulator System Christiaan J.J. Paredis, H. Benjamin Brown, Pradeep K. Khosla

    E-Print Network [OSTI]

    ­Mechanical System Design Engineering Chimera RTOS Onika VPL Building of Sensor­Based Control Software Figure 1 components, as is supported by the Chimera real­time operating system [15], with a graphical user interface

  20. Deployment at the Savannah River Site of a standardized, modular transportable and connectable hazard category 2 nuclear system for repackaging TRU waste

    SciTech Connect (OSTI)

    Lussiez, G. (Guy); Hickman, S. (Scott); Anast, K. R. (Kurt R.); Oliver, W. B. (William B.)

    2004-01-01T23:59:59.000Z

    This paper describes the conception, design, fabrication and deployment of a modular, transportable, connectable Category 2 nuclear system deployed at the Savannah River site to be used for characterizing and repackaging Transuranic Waste destined for the Waste Isolation Pilot Plant (WIPP). A standardized Nuclear Category 2 and Performance Category 2 envelope called a 'Nuclear Transportainer' was conceived and designed that provides a safety envelope for nuclear operations. The Nuclear Transportainer can be outfitted with equipment that performs functions necessary to meet mission objectives, in this case repackaging waste for shipment to WIPP. Once outfitted with process and ventilation systems the Nuclear Transportainer is a Modular Unit (MU). Each MU is connectable to other MUS - nuclear or non-nuclear - allowing for multiple functions, command & control, or increasing capacity. The design took advantage of work already in-progress at Los Alamos National Laboratory (LANL) for a similar system to be deployed at LANL's Technical Area 54.

  1. australis common reed: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to exclude others from making, using, offering for sale 307 Reed-Joseph International Company Environmental Sciences and Ecology Websites Summary: is offering field...

  2. Optimization Online - Optimal synthesis in the Reeds and Shepp ...

    E-Print Network [OSTI]

    Andrey Dmitruk

    2011-09-09T23:59:59.000Z

    Sep 9, 2011 ... Keywords: Reeds and Shepp car, time-optimal problem, Pontryagin Maximum Principle, reachability sets, optimal synthesis. Category 1: ...

  3. How to develop and deploy system integrators within component-focused engineering organizations

    E-Print Network [OSTI]

    Stevens, Michelle P., 1974-

    2005-01-01T23:59:59.000Z

    Thesis statement: The purpose of this thesis is to provide a roadmap for how a component-focused engineering company can effectively introduce system integrators in their organization. To this end, the question of how to ...

  4. Enhancing vehicle safety management in training deployments : an application of system dynamics

    E-Print Network [OSTI]

    Lim, Kelvin F. H. (Kelvin Fang Hui)

    2008-01-01T23:59:59.000Z

    Organization Sierra-Tango is employing a systematic and methodical safety framework to manage risks in all their operational and training activities. While this safety system has shown itself to be reasonably effective in ...

  5. Air Quality and Intelligent Transportation Systems: Understanding Integrated Innovation, Deployment and Adaptation of Public Technologies

    E-Print Network [OSTI]

    de Weck, Olivier L.

    and Adaptation of Public Technologies by Rebecca Susanne Dodder B.A. Physics and Spanish 7 8anderbilt University and Adaptation of Public Technologies by Rebecca Susanne Dodder Submitted to the Engineering Systems Division

  6. Power Systems Engineering Research Center Modeling, Analysis and Deployment of High PV

    E-Print Network [OSTI]

    Van Veen, Barry D.

    and equipment using GIS data, loads using AMI data and PV systems using measured PV output from extensive data electronics and grid integration of renew- able resources mainly solar PV and wind. Dr. Ayyanar received

  7. Nuclear Power - Deployment, Operation and Sustainability

    E-Print Network [OSTI]

    . Tsvetkov p. cm. ISBN 978-953-307-474-0 free online editions of InTech Books and Journals can be found at www.intechopen.com Contents Preface IX Part 1 Nuclear Power Deployment 1 Chapter 1 Nuclear Naval Propulsion 3 Magdi... to successful development, deployment and operation of nuclear power systems worldwide: Nuclear Power Deployment 1. Nuclear Naval Propulsion 2. Deployment Scenarios for New Technologies 3. The Investment Evaluation of Third-Generation Nuclear Power - from...

  8. High-Penetration PV Deployment in the Arizona Public Service System, Phase 1 Update: Preprint

    SciTech Connect (OSTI)

    Hambrick, J.; Narang, D.

    2012-06-01T23:59:59.000Z

    In an effort to better understand the impacts of high penetrations of photovoltaic generators on distribution systems, Arizona Public Service and its partners have begun work on a multi-year project to develop the tools and knowledge base needed to safely and reliably integrate high penetrations of utility- and residential-scale photovoltaics (PV). Building upon the APS Community Power Project -- Flagstaff Pilot, this project will analyze the impact of PV on a representative feeder in northeast Flagstaff. To quantify and catalog the effects of the estimated 1.3 MW of PV that will be installed on the feeder (both smaller units at homes as well as large, centrally located systems), high-speed weather and electrical data acquisition systems and digital 'smart' meters are being designed and installed to facilitate monitoring and to build and validate comprehensive, high-resolution models of the distribution system. These models will be used to analyze the impacts of the PV on distribution circuit protection systems (including anti-islanding), predict voltage regulation and phase balance issues, and develop volt/var control schemes. This paper continues from a paper presented at the 2011 IEEE PVSC conference that introduces the project and describes some of the preliminary consideration, as well as project plans and early results. This paper gives a status update of the project and presents selected results from Phase 2 of the project. It discusses baseline feeder modeling, load allocation, data acquisition, utility-scale PV integration, preliminary model validation, and plans for future phases.

  9. Inter-organizational Systems: From Business Values over Business Processes to Deployment

    E-Print Network [OSTI]

    approach to inter-organizational systems. Index Terms--business modeling, business process mod- eling changing business conditions. Business models must reflect these changes, business pro- cesses must a distributed solution for a business partnership. This is in line with the Open-edi reference model, which

  10. Deploying a Medical Record System in Rural Rwanda University of Washington

    E-Print Network [OSTI]

    Parikh, Tapan S.

    into a community of developers and users working toward better systems for managing health information. Our work to implement appropriate technology solutions. 2. INFRASTRUCTURE Rwinkwavu Hospital is in a remote town and has on solar power and generator and have no running water. All the sites have intermittent cellular coverage

  11. Wind Energy Deployment in Isolated Islanded Power Systems: Challenges & Realities (Poster)

    SciTech Connect (OSTI)

    Baring-Gould, I.

    2014-05-01T23:59:59.000Z

    Rising costs of fuels, energy surety, and the carbon impacts of diesel fuel are driving remote and islanded communities dependent on diesel power generation to look for alternatives. Over the past few years, interest in using wind energy to reduce diesel fuel consumption has increased dramatically, potentially providing economic, environmental, social, and security benefits to the energy supply of isolated and islanded communities. However, the task of implementing such systems has remained elusive and subject to many cases of lower-than-expected performance. This poster describes the current status of integrating higher contribution wind technology into islanded power systems, the progress of recent initiatives implemented by the U.S. Department of Energy and Interior, and some of the lingering technical and commercial challenges. Operating experience from a number of power systems is described. The worldwide market for wind development in islanded communities (some of these supplying large domestic loads) provides a strong market niche for the wind industry, even in the midst of a slow global recovery.

  12. Women @ Energy: Valerie Reed | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your DensityEnergy U.S.-China Electric VehicleCenters | DepartmentKavita RaviValerie Reed Women @ Energy:

  13. High Penetration Solar Deployment Funding Opportunity

    Broader source: Energy.gov [DOE]

    Through the High Penetration Solar Deployment program, DOE is funding solar projects that are accelerating the placement of solar photovoltaic (PV) systems into existing and newly designed...

  14. Sandia National Laboratories: increase PV deployment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV deployment ECIS-Princeton Power Systems, Inc.: Demand Response Inverter On March 19, 2013, in DETL, Distribution Grid Integration, Energy, Energy Surety, Facilities, Grid...

  15. Sandia National Laboratories: high PV deployment level

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    deployment level ECIS-Princeton Power Systems, Inc.: Demand Response Inverter On March 19, 2013, in DETL, Distribution Grid Integration, Energy, Energy Surety, Facilities, Grid...

  16. Reed-Muller Codes: Spherically-Punctured Codes and Decoding Algorithms

    E-Print Network [OSTI]

    Kapralova, Olga

    2013-01-01T23:59:59.000Z

    Linear codes . . . . . . . . . . . . . . . . . . . . . . .3.3 Code parameters . . . . . . . . . . . . . .of linear codes . . . . . . . . . . . . 1.5 Reed-Muller

  17. Rapid deployment shelter system

    DOE Patents [OSTI]

    Bzorgi, Fariborz M.

    2006-10-10T23:59:59.000Z

    A shelter for the protection of for the protection of persons, animals, equipment, materials, property, and similar things of value from potentially damaging environmental conditions is disclosed. Various embodiments include the use of a frame structure and hinged panels which are unfolded to create the walls of the structure. Optionally flexible surfaces may be added to the ends of the shelter to at least partially close the end of the shelter.

  18. Deployment of Emerging Technologies

    Broader source: Energy.gov [DOE]

    Presentation covers the FUPWG Deployment of Emerging Technologies. Presented by Brad Gustafson, Department of Energy, held on November 1, 2006.

  19. ALIGNMENT, LEVELING AND DEPLOYMENT CONSTRAINTS

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Thermoelectric Generator (RTG) Crew Deployment Description Passive Seismic Experiment (PSE) Crew Deployment and Alignment Central Station Antenna Crew Deployment Description Leveling, Alignment, and Pointing Radioisotope

  20. Technology Deployment List | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Technologies Technology Deployment Technology Deployment List Technology Deployment List The Federal Energy Management Program's (FEMP) Technology Deployment List features...

  1. Maximum Likelihood Decoding of Reed Solomon Codes Madhu Sudan

    E-Print Network [OSTI]

    Sudan, Madhu

    Maximum Likelihood Decoding of Reed Solomon Codes Madhu Sudan Abstract We present a randomized and Welch [4] (see, for instance, Gem- mell and Sudan [9]). In this paper we present an algorithm which

  2. TECHNOLOGY DEVELOPMENT AND DEPLOYMENT OF SYSTEMS FOR THE RETRIEVAL AND PROCESSING OF REMOTE-HANDLED SLUDGE FROM HANFORD K-WEST FUEL STORAGE BASIN

    SciTech Connect (OSTI)

    RAYMOND RE

    2011-12-27T23:59:59.000Z

    In 2011, significant progress was made in developing and deploying technologies to remove, transport, and interim store remote-handled sludge from the 105-K West Fuel Storage Basin on the Hanford Site in south-central Washington State. The sludge in the 105-K West Basin is an accumulation of degraded spent nuclear fuel and other debris that collected during long-term underwater storage of the spent fuel. In 2010, an innovative, remotely operated retrieval system was used to successfully retrieve over 99.7% of the radioactive sludge from 10 submerged temporary storage containers in the K West Basin. In 2011, a full-scale prototype facility was completed for use in technology development, design qualification testing, and operator training on systems used to retrieve, transport, and store highly radioactive K Basin sludge. In this facility, three separate systems for characterizing, retrieving, pretreating, and processing remote-handled sludge were developed. Two of these systems were successfully deployed in 2011. One of these systems was used to pretreat knockout pot sludge as part of the 105-K West Basin cleanup. Knockout pot sludge contains pieces of degraded uranium fuel ranging in size from 600 {mu}m to 6350 {mu}m mixed with pieces of inert material, such as aluminum wire and graphite, in the same size range. The 2011 pretreatment campaign successfully removed most of the inert material from the sludge stream and significantly reduced the remaining volume of knockout pot product material. Removing the inert material significantly minimized the waste stream and reduced costs by reducing the number of transportation and storage containers. Removing the inert material also improved worker safety by reducing the number of remote-handled shipments. Also in 2011, technology development and final design were completed on the system to remove knockout pot material from the basin and transport the material to an onsite facility for interim storage. This system is scheduled for deployment in 2012. The prototype facility also was used to develop technology for systems to retrieve remote-handled transuranic sludge smaller than 6350 {mu}m being stored in underwater containers. After retrieving the sludge, the system will be used to load and transport the sludge for interim storage. During 2011, full-scale prototype systems were developed and tested to a Technology Readiness Level 6 as defined by U.S. Department of Energy standards. This system is scheduled for deployment in 2013. Operations also are scheduled for completion in 2014.

  3. Newberry Seismic Deployment Fieldwork Report

    SciTech Connect (OSTI)

    Wang, J; Templeton, D C

    2012-03-21T23:59:59.000Z

    This report summarizes the seismic deployment of Lawrence Livermore National Laboratory (LLNL) Geotech GS-13 short-period seismometers at the Newberry Enhanced Geothermal System (EGS) Demonstration site located in Central Oregon. This Department of Energy (DOE) demonstration project is managed by AltaRock Energy Inc. AltaRock Energy had previously deployed Geospace GS-11D geophones at the Newberry EGS Demonstration site, however the quality of the seismic data was somewhat low. The purpose of the LLNL deployment was to install more sensitive sensors which would record higher quality seismic data for use in future seismic studies, such as ambient noise correlation, matched field processing earthquake detection studies, and general EGS microearthquake studies. For the LLNL deployment, seven three-component seismic stations were installed around the proposed AltaRock Energy stimulation well. The LLNL seismic sensors were connected to AltaRock Energy Gueralp CMG-DM24 digitizers, which are powered by AltaRock Energy solar panels and batteries. The deployment took four days in two phases. In phase I, the sites were identified, a cavity approximately 3 feet deep was dug and a flat concrete pad oriented to true North was made for each site. In phase II, we installed three single component GS-13 seismometers at each site, quality controlled the data to ensure that each station was recording data properly, and filled in each cavity with native soil.

  4. Integrated Technology Deployment

    Office of Energy Efficiency and Renewable Energy (EERE)

    Integrated technology deployment is a comprehensive approach to implementing solutions that increase the use of energy efficiency and renewable energy technologies. Federal, state, and local...

  5. Reed cutting affects arthropod communities, potentially reducing food for passerine birds

    E-Print Network [OSTI]

    Richner, Heinz

    March 2004 Abstract Winter cutting of Common Reed Phragmites australis (Poaceae) is increasing; Habitat management 1. Introduction Monospecific stands of Common Reed Phragmites australis are widely for passerine birds. Consequently, large-scale mechanically harvested reed beds host altered ar- thropod

  6. Evaluation of Stationary Fuel Cell Deployments, Costs, and Fuels (Presentation)

    SciTech Connect (OSTI)

    Ainscough, C.; Kurtz, J.; Peters, M.; Saur, G.

    2013-10-01T23:59:59.000Z

    This presentation summarizes NREL's technology validation of stationary fuel cell systems and presents data on number of deployments, system costs, and fuel types.

  7. Modeling EERE Deployment Programs

    SciTech Connect (OSTI)

    Cort, Katherine A.; Hostick, Donna J.; Belzer, David B.; Livingston, Olga V.

    2007-11-08T23:59:59.000Z

    The purpose of this report is to compile information and conclusions gathered as part of three separate tasks undertaken as part of the overall project, “Modeling EERE Deployment Programs,” sponsored by the Planning, Analysis, and Evaluation office within the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE). The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address improvements to modeling in the near term, and note gaps in knowledge where future research is needed.

  8. With the growing availability of data because of the deployment of intelligent transportation systems, methods for assessing and report-

    E-Print Network [OSTI]

    Bertini, Robert L.

    is demonstrated. First, data are extracted from the bus dispatch system of the Tri-County Metropolitan Transit management systems (ATMSs) and advanced traveler information systems (ATISs). In Portland, Oregon, the Tri-County District (TriMet), the transit provider for Port- land, Oregon. Then, the performance characteristics

  9. Deployment & Market Transformation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    NREL's deployment and market transformation (D and MT) activities encompass the laboratory's full range of technologies, which span the energy efficiency and renewable energy spectrum. NREL staff educates partners on how they can advance sustainable energy applications and also provides clients with best practices for reducing barriers to innovation and market transformation.

  10. IEEE TRANSACTIONS ON INFORMATION THEORY, VOL. 51, NO. 12, DECEMBER 2005 4363 Soft-In Soft-Out Decoding of ReedSolomon Codes Based

    E-Print Network [OSTI]

    Grant, Alex

    decoded systems. Index Terms--Graphical models, Reed­Solomon (RS) codes, soft-in soft-out (SISO) decodingIEEE TRANSACTIONS ON INFORMATION THEORY, VOL. 51, NO. 12, DECEMBER 2005 4363 Soft-In Soft, Member, IEEE Abstract--This correspondence presents an optimal soft-in soft-out (SISO) decoding algorithm

  11. Economic Impact of Fuel Cell Deployment in Forklifts and for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ANL-1309 Economic Impact of Fuel Cell Deployment in Forklifts and for Backup Power under the American Recovery and Reinvestment Act Energy Systems Division About Argonne National...

  12. Analysis & Tools to Spur Increased Deployment of " Waste Heat...

    Open Energy Info (EERE)

    Analysis & Tools to Spur Increased Deployment of " Waste Heat" RejectionRecycling Hybrid GHP Systems in Hot, Arid or Semiarid Climates Like Texas Geothermal Project Jump to:...

  13. Successful Deployment of System for the Storage and Retrieval of Spent/Used Nuclear Fuel from Hanford K-West Fuel Storage Basin-13051

    SciTech Connect (OSTI)

    Quintero, Roger; Smith, Sahid [U.S. Department of Energy, Richland Operations Office, Richland, Washington 99352 (United States)] [U.S. Department of Energy, Richland Operations Office, Richland, Washington 99352 (United States); Blackford, Leonard Ty; Johnson, Mike W.; Raymond, Richard; Sullivan, Neal; Sloughter, Jim [CH2M HILL Plateau Remediation Company, Richland, Washington 99352 (United States)] [CH2M HILL Plateau Remediation Company, Richland, Washington 99352 (United States)

    2013-07-01T23:59:59.000Z

    In 2012, a system was deployed to remove, transport, and interim store chemically reactive and highly radioactive sludge material from the Hanford Site's 105-K West Fuel Storage Basin that will be managed as spent/used nuclear fuel. The Knockout Pot (KOP) sludge in the 105-K West Basin was a legacy issue resulting from the spent nuclear fuel (SNF) washing process applied to 2200 metric tons of highly degraded fuel elements following long-term underwater storage. The washing process removed uranium metal and other non-uranium constituents that could pass through a screen with 0.25-inch openings; larger pieces are, by definition, SNF or fuel scrap. When originally retrieved, KOP sludge contained pieces of degraded uranium fuel ranging from 600 microns (?m) to 6350 ?m mixed with inert material such as aluminum hydroxide, aluminum wire, and graphite in the same size range. In 2011, a system was developed, tested, successfully deployed and operated to pre-treat KOP sludge as part of 105-K West Basin cleanup. The pretreatment process successfully removed the vast majority of inert material from the KOP sludge stream and reduced the remaining volume of material by approximately 65 percent, down to approximately 50 liters of material requiring management as used fuel. The removal of inert material resulted in significant waste minimization and project cost savings because of the reduced number of transportation/storage containers and improvement in worker safety. The improvement in worker safety is a result of shorter operating times and reduced number of remote handled shipments to the site fuel storage facility. Additionally in 2011, technology development, final design, and cold testing was completed on the system to be used in processing and packaging the remaining KOP material for removal from the basin in much the same manner spent fuel was removed. This system was deployed and successfully operated from June through September 2012, to remove and package the last of the SNF fragments from the 105-K West Basin, ending the long and complex history of the KOP sludge materials. The planning and execution of this project demonstrated how the graded application of DOE O 413.3B, Program and Project Management for the Acquisition of Capital Assets[1], DOE-STD-1189-2008, Integration of Safety into the Design Process[2], and DOE G 413.3-4, U.S. Department of Energy Technology Readiness Assessment Guide[3], can positively affect the outcome of project implementation in the DOE Complex. Provided herein are relevant information, ideas, and tools for use by other projects facing similar issues in managing high risk waste streams in a complex regulatory environment. Positive aspects are also provided of appropriate time spent in detailed planning, design, and testing in non-hazardous environments to reduce project risks in both cost and safety performance, as well as improving confidence in meeting project goals through predictable and reliable performance. (authors)

  14. NREL: Technology Deployment - Staff

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCostBuildingModels andProjectDeployment

  15. Reliable Process for Security Policy Deployment

    E-Print Network [OSTI]

    Preda, Stere; Cuppens, Frederic; Garcia-Alfaro, Joaquin; Toutain, Laurent

    2009-01-01T23:59:59.000Z

    We focus in this paper on the problem of configuring and managing network security devices, such as Firewalls, Virtual Private Network (VPN) tunnels, and Intrusion Detection Systems (IDSs). Our proposal is the following. First, we formally specify the security requirements of a given system by using an expressive access control model. As a result, we obtain an abstract security policy, which is free of ambiguities, redundancies or unnecessary details. Second, we deploy such an abstract policy through a set of automatic compilations into the security devices of the system. This proposed deployment process not only simplifies the security administrator's job, but also guarantees a resulting configuration free of anomalies and/or inconsistencies.

  16. Development and Deployment of the Extended Reach Sluicing System (ERSS) for Retrieval of Hanford Single Shell Tank Waste. Draft

    SciTech Connect (OSTI)

    Bauer, Roger E. [Washington River Protection Systems, Richland, WA (United States); Figley, Reed R. [Washington River Protection Systems, Richland, WA (United States); Innes, A. G. [Washington River Protection Systems, Richland, WA (United States)

    2013-11-11T23:59:59.000Z

    A history of the evolution and the design development of Extended Reach Sluicer System (ERSS) is presented. Several challenges are described that had to be overcome to create a machine that went beyond the capabilities of prior generation sluicers to mobilize waste in Single Shell Tanks for pumping into Double Shell Tank receiver tanks. Off-the-shelf technology and traditional hydraulic fluid power systems were combined with the custom-engineered components to create the additional functionality of the ERSS, while still enabling it to fit within very tight entry envelope into the SST. Problems and challenges inevitably were encountered and overcome in ways that enhance the state of the art of fluid power applications in such constrained environments. Future enhancements to the ERSS design are explored for retrieval of tanks with different dimensions and internal obstacles.

  17. Technology Deployment List | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Technology Deployment List Technology Deployment List Spreadsheet details new and underutilized technologies ranked for Federal deployment by the Federal Energy Management Program....

  18. Development and Deployment of a Short Rotation Woody Crops Harvesting System Based on a Case New Holland Forage Harvester and SRC Woody Crop Header

    SciTech Connect (OSTI)

    Eisenbies, Mark [SUNY ESF; Volk, Timothy [SUNY ESF

    2014-10-03T23:59:59.000Z

    Demand for bioenergy sourced from woody biomass is projected to increase; however, the expansion and rapid deployment of short rotation woody crop systems in the United States has been constrained by high production costs and sluggish market acceptance due to problems with quality and consistency from first-generation harvesting systems. The objective of this study was to evaluate the effect of crop conditions on the performance of a single-pass, cut and chip harvester based on a standard New Holland FR-9000 series forage harvester with a dedicated 130FB short rotation coppice header, and the quality of chipped material. A time motion analysis was conducted to track the movement of machine and chipped material through the system for 153 separate loads over 10 days on a 54-ha harvest. Harvester performance was regulated by either ground conditions, or standing biomass on 153 loads. Material capacities increased linearly with standing biomass up to 40 Mgwet ha-1 and plateaued between 70 and 90 Mgwet hr-1. Moisture contents ranged from 39 to 51% with the majority of samples between 43 and 45%. Loads produced in freezing weather (average temperature over 10 hours preceding load production) had 4% more chips greater than 25.4 mm (P < 0.0119). Over 1.5 Mgdry ha-1 of potentially harvested material (6-9% of a load) was left on site, of which half was commercially undesirable meristematic pieces. The New Holland harvesting system is a reliable and predictable platform for harvesting material over a wide range of standing biomass; performance was consistent overall in 14 willow cultivars.

  19. WINDExchange: Deployment Activities

    Wind Powering America (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: EnergyWyandanch,EagaAbout Printable Version BookmarkDeployment

  20. Economics of ALMR deployment

    SciTech Connect (OSTI)

    Delene, J.G.; Fuller, L.C.; Hudson, C.R.

    1994-12-31T23:59:59.000Z

    The Advanced Liquid Metal Reactor (ALMR) has the potential to extend the economic life of the nuclear option and of reducing the number of high level waste repositories which will eventually be needed in an expanding nuclear economy. This paper reports on an analysis which models and evaluates the economics of the use of ALMRs as a component of this country`s future electricity generation mix. The ALMR concept has the ability to utilize as fuel the fissile material contained in previously irradiated nuclear fuel (i.e., spent fuel) or from surplus weapons grade material. While not a requirement for the successful deployment of ALMR power plant technology, the reprocessing of spent fuel from light water reactors (LWR) is necessary for any rapid introduction of ALMR power plants. In addition, the reprocessing of LWR spent fuel may reduce the number of high level waste repositories needed in the future by burning the long-lived actinides produced in the fission process. With this study, the relative economics of a number of potential scenarios related to these issues are evaluated. While not encompassing the full range of all possibilities, the cases reported here provide an indication of the potential costs, timings, and relative economic attractiveness of ALMR deployment.

  1. Magic state distillation in all prime dimensions using quantum Reed-Muller codes

    E-Print Network [OSTI]

    Campbell, Earl T; Browne, Dan E

    2012-01-01T23:59:59.000Z

    We propose families of protocols for magic state distillation -- important components of fault tolerance schemes --- for systems of odd prime dimension. Our protocols utilize quantum Reed-Muller codes with transversal non-Clifford gates. We find that in higher dimensions smaller codes can be used than one might expect based on qubit codes. All our protocols produce magic states at a resource cost that increases only polynomially with the inverse of the final ouput error probability. We give specific details for 3-dimensional systems, where we find that certain magic states can be distilled provided an initial error probability of less than 20.02% or a depolarizing noise rate of less than 31.7%. This is the largest error probability threshold of all known protocols with polynomial resource cost. For a depolarizing noise model we also give distillation thresholds for odd prime dimensions up-to 19.

  2. A STUDY OF ACTIVATED SLUDGE DEWATERING IN EXPERIMENTAL REED-PLANTED OR UNPLANTED SLUDGE

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    94/0169 A STUDY OF ACTIVATED SLUDGE DEWATERING IN EXPERIMENTAL REED-PLANTED OR UNPLANTED SLUDGE of the reeds in bed 2 died in spite of the influent sludge dose of 70 g. of SS.m"2.d~l. During the second phase (917 days) the 3 beds were aerated from the bottom and fed with sludge, directly extracted from

  3. Sludge drying reed beds: a full and pilot-scales study for activated sludge treatment

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Sludge drying reed beds: a full and pilot-scales study for activated sludge treatment S. Troesch.troesch@cemagref.fr, dirk.esser@sint.fr Abstract Sludge drying reed beds have been used for dewatering and mineralization of sludge since the beginning of the 90's, but their insufficient performances in terms of Dry Matter [DM

  4. Reed-Solomon Turbo Product Codes for Optical Communications: From Code Optimization to

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Reed-Solomon Turbo Product Codes for Optical Communications: From Code Optimization to Decoder Design Rapha¨el Le Bidan, Camille Leroux, Christophe J´ego, Patrick Adde, Ramesh Pyndiah Abstract--Turbo. In this paper, we investi- gate the use of Reed-Solomon (RS) turbo product codes for 40 Gb/s transmission over

  5. On the higher ef ciency of parallel Reed-Solomon turbo-decoding

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    On the higher ef ciency of parallel Reed-Solomon turbo-decoding Camille LEROUX, Christophe JEGO.lastname@telecom-bretagne.eu Abstract-- In this paper, we demonstrate the higher hardware ef ciency of Reed-Solomon (RS) parallel turbo decoding compared with BCH parallel turbo decoding. Based on an innovative ar- chitecture, this is the rst

  6. Environmental issues affecting clean coal technology deployment

    SciTech Connect (OSTI)

    Miller, M.J. [Electric Power Research Inst., Palo Alto, CA (United States)

    1997-12-31T23:59:59.000Z

    The author outlines what he considers to be the key environmental issues affecting Clean Coal Technology (CCT) deployment both in the US and internationally. Since the international issues are difficult to characterize given different environmental drivers in various countries and regions, the primary focus of his remarks is on US deployment. However, he makes some general remarks, particularly regarding the environmental issues in developing vs. developed countries and how these issues may affect CCT deployment. Further, how environment affects deployment depends on which particular type of clean coal technology one is addressing. It is not the author`s intention to mention many specific technologies other than to use them for the purposes of example. He generally categorizes CCTs into four groups since environment is likely to affect deployment for each category somewhat differently. These four categories are: Precombustion technologies such as coal cleaning; Combustion technologies such as low NOx burners; Postcombustion technologies such as FGD systems and postcombustion NOx control; and New generation technologies such as gasification and fluidized bed combustion.

  7. Reed River Hot Spring Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ | Roadmap Jump to:bJumpRed Bank, New Jersey:MesaRedwoodReed

  8. Accelerating Combined Heat & Power Deployment

    Broader source: Energy.gov (indexed) [DOE]

    Reduced electric grid congestion Pollution reduction Most institutionalregulatorybusiness models do not incentivize CHP deployment in a manner that helps optimize energy...

  9. Sensitivity of Utility-Scale Solar Deployment Projections in the SunShot Vision Study to Market and Performance Assumptions

    SciTech Connect (OSTI)

    Eurek, K.; Denholm, P.; Margolis, R.; Mowers, M.

    2013-04-01T23:59:59.000Z

    The SunShot Vision Study explored the potential growth of solar markets if solar prices decreased by about 75% from 2010 to 2020. The ReEDS model was used to simulate utility PV and CSP deployment for this present study, based on several market and performance assumptions - electricity demand, natural gas prices, coal retirements, cost and performance of non-solar renewable technologies, PV resource variability, distributed PV deployment, and solar market supply growth - in addition to the SunShot solar price projections. This study finds that utility-scale solar deployment is highly sensitive to solar prices. Other factors can have significant impacts, particularly electricity demand and natural gas prices.

  10. ZIGBEE WIRELESS SENSOR NETWORK NODES DEPLOYMENT STRATEGY FOR

    E-Print Network [OSTI]

    ZIGBEE WIRELESS SENSOR NETWORK NODES DEPLOYMENT STRATEGY FOR DIGITAL AGRICULTURAL DATA ACQUISITIONBee-based wireless sensor network for digital agricultural data acquisition is one of the best ways to build the system. In this paper, based on ZigBee wireless sensor network deployment planning principles

  11. Deployment and coverage maintenance in mobile sensor networks 

    E-Print Network [OSTI]

    Lee, Jaeyong

    2009-05-15T23:59:59.000Z

    Deployment of mobile nodes in a region of interest is a critical issue in building a mobile sensor network because it affects cost and detection capabilities of the system. The deployment of mobile sensors in essence is the movement of sensors from...

  12. Deploying Emerging Technologies in ESPC

    Broader source: Energy.gov [DOE]

    Presentation—given at the Federal Utility Partnership Working Group (FUPWG) Fall 2008 meeting—discusses emerging technologies and how to deploy them using an energy savings performance contract (ESPC).

  13. Community Renewable Energy Deployment Webinars | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Community Renewable Energy Deployment Webinars Community Renewable Energy Deployment Webinars Watch these previously recorded webinars to learn about successful community renewable...

  14. Community Renewable Energy Deployment Provides Replicable Examples...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Community Renewable Energy Deployment Provides Replicable Examples of Clean Energy Projects Community Renewable Energy Deployment Provides Replicable Examples of Clean Energy...

  15. Accelerating CHP Deployment, United States Energy Association...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Accelerating CHP Deployment, United States Energy Association (USEA), August 2011 Accelerating CHP Deployment, United States Energy Association (USEA), August 2011 The United...

  16. LET THE SUN SHINE: OPTIMAL DEPLOYMENT OF PHOTOVOLTAICS IN GERMANY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    /kWh, depending on its location as well as on the size and type of PV system used (EPIA Report, 2011). InvestmentLET THE SUN SHINE: OPTIMAL DEPLOYMENT OF PHOTOVOLTAICS IN GERMANY Anna CRETI Jérôme JOAUG Cahier n:chantal.poujouly@polytechnique.edu hal-00751743,version1-14Nov2012 #12;Let the sun shine: optimal deployment of photovoltaics in Germany

  17. Wind Vision Chapter 3: Impacts of the Wind Vision

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Solar Deployment System, or SolarDS, model 14 to generate a projection of rooftop solar photovoltaic (PV) deployment. Rooftop PV deployment is then input to ReEDS. All...

  18. Incrementally Deployable Source Address Validity

    E-Print Network [OSTI]

    Li, Jun

    ID-SAVE: Incrementally Deployable Source Address Validity Enforcement Toby Ehrenkranz ://netsec.cs.uoregon.edu #12;Ehrenkranz WiP ID-SAVE What's The Problem? While routers know which direction a packet should are unreliable ID-SAVE attacks this root cause! 1 #12;Ehrenkranz WiP ID-SAVE ID-SAVE Basics Create and maintain

  19. NREL: Technology Deployment - Solar Deployment and Market Transformation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCostBuildingModels andProjectDeployment and

  20. Model-driven Security Policy Deployment: Property Oriented Approach

    E-Print Network [OSTI]

    Garcia-Alfaro, Joaquin

    and managing the access control rules of an information system are some of the major concerns of security systems. We formally prove the process of de- ploying a security policy related to an information system the deployment of access control security policies. We show how the use of a formal ex- pression of the security

  1. Optimal Deployment of Thermal Energy Storage under Diverse Economic and Climate Conditions

    E-Print Network [OSTI]

    DeForest, Nicolas

    2014-01-01T23:59:59.000Z

    Deployment  of  Thermal  Energy   Storage  under  Diverse  Dincer I. On thermal energy storage systems and applicationsin research on cold thermal energy storage, International

  2. Networked Robotic Sensor Platform Deployments for use in Coastal Environmental Assessment in Southern California

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    Sensing Networked Robotic Sensor Platform Deployments forGaurav S. Sukhatme 1 Robotic Embedded Systems Laboratory,~4 wks) Collaborative robotic sensing Slow moving (<1km/hr)

  3. Deploying

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management FermiDavid Turner David3

  4. Development and Testing of Field-Deployable Real-Time Laser-Based Non-Intrusive Detection System for Measurement of True Travel Time on the Highway

    E-Print Network [OSTI]

    2001-01-01T23:59:59.000Z

    Real-Time Laser-Based Non-Intrusive Detection System forof a laser-based non-intrusive detection system for real-Real-Time Laser-Based Non-Intrusive Detection System for

  5. A Field-Deployable Real-Time Laser-Based Non-Intrusive Detection System for Measurement of True Travel Time on the Highway

    E-Print Network [OSTI]

    Cheng, Harry H.; Shaw, Ben; Palen, Joe; Wang, Zhaoqing; Chen, Bo

    2002-01-01T23:59:59.000Z

    Real-Time Laser-Based Non-Intrusive Detection System forJoe Palen, "A Laser-Based Non-Intrusive Detection System forReal-Time Laser-Based Non-Intrusive Detection System for

  6. Request for Information: Demonstration and Deployment Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    regarding bioenergy technology validation to accelerate the deployment of advanced biofuel, bioproducts, and biopower technologies. BETO is specifically interested in...

  7. Preprints of the 8 International Conference on Wetland Systems

    E-Print Network [OSTI]

    Boyer, Edmond

    Preprints of the 8 th International Conference on Wetland Systems Arusha ­ Tanzania ­ 16 th to 19 th Spetember 2002 1 DESIGN CRITERIA AND PERFORMANCES OF REED BED FILTERS FOR THE TREATMENT OF WASHING.houdoy@inst-elevage.asso.fr ABSTRACT Initially designed for the treatment of domestic wastewater, Vertical Flow Reed Bed Filters [VFRBF

  8. Optimal Deployment of Impromptu Wireless Sensor Networks

    E-Print Network [OSTI]

    Kumar, Anurag

    Optimal Deployment of Impromptu Wireless Sensor Networks Prasenjit Mondal, K. P. Naveen and Anurag to deploy sensors (such as motion sensors, or even imaging sensors) and a wireless interconnection network an impromptu deploy- ment of a wireless sensor network in a building. Fig. 2. Problem studied in this paper

  9. Optimization of Hydroacoustic Equipment Deployment at Foster Dam, 2013

    SciTech Connect (OSTI)

    Hughes, James S.; Johnson, Gary E.; Ploskey, Gene R.; Hennen, Matthew J.; Fischer, Eric S.; Zimmerman, Shon A.

    2013-03-01T23:59:59.000Z

    The goal of the study was to optimize performance of the fixed-location hydroacoustic systems at Foster Dam (FOS) by determining deployment and data acquisition methods that minimized structural, electrical, and acoustic interference. Optimization of the hydroacoustic systems will establish methodology for sampling by active acoustic methods during this year-long evaluation of juvenile salmonid passage at FOS.

  10. A Model-driven Environment for Component Deployment* Petr Hntynka

    E-Print Network [OSTI]

    , the paper also shows that a plain MDA approach (the one used in the OMG Deployment and Configuration interconnections of their interfaces. 1.1. MDA Model-Driven Architecture (MDA) [19] is the latest approach of OMG these systems, rather it is an approach to software development using models. According to MDA concepts, systems

  11. Amyloodinium Infections of Marine Fish1 Peggy Reed and Ruth Francis-Floyd2

    E-Print Network [OSTI]

    Watson, Craig A.

    VM90 Amyloodinium Infections of Marine Fish1 Peggy Reed and Ruth Francis-Floyd2 1. This document of both marine and brackish water fishes. The organism may be more closely related to a toxic algae than in freshwater fish. The disease caused by these organisms has been referred to as "velvet," "rust" and "gold

  12. "Red Sore Disease"in Game Fish1 Peggy Reed and Ruth Francis-Floyd2

    E-Print Network [OSTI]

    Watson, Craig A.

    VM85 "Red Sore Disease"in Game Fish1 Peggy Reed and Ruth Francis-Floyd2 1. This document is VM85 fish is generically referred to as "red sore disease." This problem usually occurs in the spring on their fish. Typically, "red sore disease" is caused by two organisms, Aeromonas hydrophila , a bacterium

  13. Rogue Performances: Staging the Underclasses in Early American Theatre Culture. By Peter P. Reed

    E-Print Network [OSTI]

    Mielke, Laura L.

    2009-01-01T23:59:59.000Z

    . and Joseph Roach here is clear and acknowledged; Reed fruitfully builds upon the latter’s description of the performative cultures of the circumatlantic world and the former’s emphasis on the African diasporic contribution to blackface by detailing how...

  14. Ccile Hannay, Julio Bacmeister, Rich Neale, John Truesdale, Kevin Reed, and Andrew Gettelman.

    E-Print Network [OSTI]

    Hannay, Cécile

    Cécile Hannay, Julio Bacmeister, Rich Neale, John Truesdale, Kevin Reed, and Andrew Gettelman has some skills to simulate tropical cyclones #12;Storm Count: Tropical Storm, Hurricane, Major Hurricane. Observations: IBTrACS CAM5: 0.25 degree Global - Obs - CAM5 West Pacific - Obs - CAM5 North

  15. Ccile Hannay, Julio Bacmeister, Rich Neale, John Truesdale, Kevin Reed, and Andrew Gettelman.

    E-Print Network [OSTI]

    Hannay, Cécile

    Cécile Hannay, Julio Bacmeister, Rich Neale, John Truesdale, Kevin Reed, and Andrew Gettelman.25 degree has some skills to simulate tropical cyclones #12;Storm Count: Tropical Storm, Hurricane, Major Hurricane. Observations: IBTrACS CAM5: 0.25 degree Global - Obs - CAM5 West Pacific - Obs - CAM5 North

  16. Reversed Doppler Effect in Photonic Crystals Evan J. Reed,* Marin Soljacic, and John D. Joannopoulos

    E-Print Network [OSTI]

    Soljaèiæ, Marin

    Reversed Doppler Effect in Photonic Crystals Evan J. Reed,* Marin Soljacic´, and John D, 42.79.Hp, 42.79.Jq, 47.40.Nm In 1843, Johann Christian Doppler proposed an effect whereby of extrasolar planets. The Doppler effect predicts that light shined by an ob- server onto an object moving

  17. Integrated assessment of dispersed energy resources deployment

    SciTech Connect (OSTI)

    Marnay, Chris; Blanco, Raquel; Hamachi, Kristina S.; Kawaan, Cornelia P.; Osborn, Julie G.; Rubio, F. Javier

    2000-06-01T23:59:59.000Z

    The goal of this work is to create an integrated framework for forecasting the adoption of distributed energy resources (DER), both by electricity customers and by the various institutions within the industry itself, and for evaluating the effect of this adoption on the power system, particularly on the overall reliability and quality of electrical service to the end user. This effort and follow on contributions are intended to anticipate and explore possible patterns of DER deployment, thereby guiding technical work on microgrids towards the key technical problems. An early example of this process addressed is the question of possible DER adopting customer disconnection. A deployment scenario in which many customers disconnect from their distribution company (disco) entirely leads to a quite different set of technical problems than a scenario in which customers self generate a significant share or all of their on-site electricity requirements and additionally buy and sell energy and ancillary services (AS) locally and/or into wider markets. The exploratory work in this study suggests that the economics under which customers disconnect entirely are unlikely.

  18. Fourth IEEE Workshop on Applications of Computer Vision, October 1998, Princeton, New Jersey, USA Video Occupant Detection for Airbag Deployment

    E-Print Network [OSTI]

    Krumm, John

    Video Occupant Detection for Airbag Deployment John Krumm and Greg Kirk Intelligent Systems & Robotics Center Sandia National Laboratories Albuquerque, NM 87185 Abstract When an airbag deploys on a rear-facing infant seat, it can injure or kill the infant. When an airbag deploys on an empty seat, the airbag

  19. Design Considerations for Deploying Underwater Sensor Networks Raja Jurdak

    E-Print Network [OSTI]

    Lopes, Cristina Videira

    integration have yielded smaller and more powerful processors that are capable of efficiently running acoustic for specialized com- munication hardware and reduces system cost, facili- tating the dense deployment of motes to form under- water acoustic sensor networks. The use of low power generic acoustic hardware and software

  20. Commercial Building Demonstration and Deployment Overview - 2014...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office's Commercial Building Demonstration and Deployment activities. Through robust feedback, the BTO Program Peer Review enhances existing efforts and improves future designs....

  1. Featured Publications on Integrated Technology Deployment

    Office of Energy Efficiency and Renewable Energy (EERE)

    Information on the analysis and technical assistance conducted through the integrated deployment effort to help various locations around the world address specific energy challenges. Includes case...

  2. Electric Vehicle Charging Infrastructure Deployment Guidelines...

    Open Energy Info (EERE)

    to: navigation, search Tool Summary LAUNCH TOOL Name: Electric Vehicle Charging Infrastructure Deployment Guidelines: British Columbia AgencyCompany Organization: Natural...

  3. Buildings Technologies Deployment | Clean energy | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are successfully deployed to the fullest extent possible. ORNL helps optimize the energy performance of buildings and industrial processes by moving technologies to full use...

  4. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

    E-Print Network [OSTI]

    Integrated Canada-U.S. Power Sector Modeling with the Regional Energy Deployment System (ReEDS) Andrew Integrated Canada-U.S. Power Sector Modeling with the Regional Energy Deployment System (ReEDS) Andrew contract number DE-AC36-08GO28308. #12;iv Abstract The electric power system in North America is linked

  5. PMU Deployment for Optimal State Estimation Performance

    E-Print Network [OSTI]

    Roy, Sumit

    the observability of candidate deployments at each step and improves the convergence speed of the search. In [5PMU Deployment for Optimal State Estimation Performance Yue Yang, Student Member IEEE, and Sumit electronic devices (IED), that sense the grid state variables so as to support enhanced, real-time monitoring

  6. Reed Reactor Facility final report, September 1, 1995--August 31, 1996

    SciTech Connect (OSTI)

    NONE

    1997-09-01T23:59:59.000Z

    This report covers the period from September 1, 1995 to August 31, 1996. This report is intended to fulfill several purposes including the reporting requirements of the US Nuclear Regulatory Commission, the US Department of Energy, and the Oregon Department of Energy. Highlights of the last year include: student participation in the program is very high; the facility continues its success in obtaining donated equipment from the Portland General Electric, US Department of Energy, and other sources; the facility is developing more paid work; progress is being made in a collaborative project with Pacific Northwest National Laboratory on isotope production for medical purposes. There were over 1,500 individual visits to the Reactor Facility during the year. Most were students in classes at Reed College or area universities, colleges, and high schools. Including tours and research conducted at the facility, the Reed Reactor Facility contributed to the educational programs of six colleges and universities in addition to eighteen pre-college groups. During the year, the reactor was operated almost three hundred separate times. The total energy production was over 23 MW-hours. The reactor staff consists of a Director, an Associated Director, a contract Health Physicist, and approximately twenty Reed College undergraduate students as hourly employees. All radiation exposures to individuals during this year were well below 5% of the federal limits.

  7. Optimal Deployment of Direction-finding Systems

    E-Print Network [OSTI]

    Kim, Suhwan

    2013-03-27T23:59:59.000Z

    of this dissertation have been or will be published in refereed journals, which will hold the associated copyrights. vi NOMENCLATURE AOI Area of Interest CI Confidence Interval CVaR Conditional VaR DF Direction Finder FL Forward Line GIS Geographic... .................................................................................................. 1 1.1. Background .................................................................................................. 1 1.2. Related objectives ......................................................................................... 3 1.3...

  8. Deployment of FlexCHP System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube| DepartmentStatementDepartment of EnergyHydropower Technologies28, 2010

  9. Optimization of Hydroacoustic Equipment Deployments at Lookout Point and Cougar Dams, Willamette Valley Project, 2010

    SciTech Connect (OSTI)

    Johnson, Gary E.; Khan, Fenton; Ploskey, Gene R.; Hughes, James S.; Fischer, Eric S.

    2010-08-18T23:59:59.000Z

    The goal of the study was to optimize performance of the fixed-location hydroacoustic systems at Lookout Point Dam (LOP) and the acoustic imaging system at Cougar Dam (CGR) by determining deployment and data acquisition methods that minimized structural, electrical, and acoustic interference. The general approach was a multi-step process from mount design to final system configuration. The optimization effort resulted in successful deployments of hydroacoustic equipment at LOP and CGR.

  10. IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 17, NO. 4, APRIL 1999 689 The Rapidly Deployable Radio Network

    E-Print Network [OSTI]

    Kansas, University of

    , and mobile node management. This paper describes the architecture for the Rapidly Deployable Radio Network for implementing mobile, rapidly deployable, and adaptive wireless communica- tions systems. The driving and a prototype system built to evaluate key system components. Index Terms-- Adaptive protocols, mobile

  11. Demonstration and Deployment Strategy Workshop: Summary

    Broader source: Energy.gov [DOE]

    This report is based on the proceedings of the U.S. DOE’s Bioenergy Technologies Office Demonstration and Deployment Strategy Workshop, held on March 12–13, 2014, at Argonne National Laboratory.

  12. Analysis of deployable strut roof structures

    E-Print Network [OSTI]

    Wolfe, Maxwell H. (Maxwell Henry)

    2013-01-01T23:59:59.000Z

    Deployable structures are structures that can change shape from a compact to an expanded form. Thus, their advantage over conventional structures is adaptability, whether in the sense of adapting to changing environmental ...

  13. State perspectives on clean coal technology deployment

    SciTech Connect (OSTI)

    Moreland, T. [State of Illinois Washington Office, Washington, DC (United States)

    1997-12-31T23:59:59.000Z

    State governments have been funding partners in the Clean Coal Technology program since its beginnings. Today, regulatory and market uncertainties and tight budgets have reduced state investment in energy R and D, but states have developed program initiatives in support of deployment. State officials think that the federal government must continue to support these technologies in the deployment phase. Discussions of national energy policy must include attention to the Clean Coal Technology program and its accomplishments.

  14. High-temperature superconductors as electromagnetic deployment and support structures in spacecraft

    E-Print Network [OSTI]

    Gettliffe, Gwendolyn Vines

    2013-01-01T23:59:59.000Z

    In this thesis, we investigate a new structural and mechanical technique aimed at reducing the mass and increasing the stowed-to-deployed ratio of spacecraft systems. This technique uses the magnetic fields generated by ...

  15. Good Practice Guide on Firewall Deployment for SCADA and Process...

    Energy Savers [EERE]

    Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks In recent years,...

  16. Deployment Barriers to Distributed Wind Energy: Workshop Report...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deployment Barriers to Distributed Wind Energy: Workshop Report, October 28, 2010 Deployment Barriers to Distributed Wind Energy: Workshop Report, October 28, 2010 This report...

  17. Synchrophasor Technologies and their Deployment in the Recovery...

    Broader source: Energy.gov (indexed) [DOE]

    Synchrophasor Technologies and their Deployment in the Recovery Act Smart Grid Programs (August 2013) Synchrophasor Technologies and their Deployment in the Recovery Act Smart Grid...

  18. Electric Vehicle Deployment: Policy Questions and Impacts to...

    Office of Environmental Management (EM)

    Vehicle Deployment: Policy Questions and Impacts to the U.S. Electric Grid - EAC Recommendations (November 2011) Electric Vehicle Deployment: Policy Questions and Impacts to the...

  19. Energy Department Selects 11 Tribal Communities to Deploy Energy...

    Energy Savers [EERE]

    Selects 11 Tribal Communities to Deploy Energy Efficiency and Renewable Energy Technologies Energy Department Selects 11 Tribal Communities to Deploy Energy Efficiency and...

  20. Renewable Energy Deployment Projects for Forest County Potawatomi...

    Office of Environmental Management (EM)

    Energy Deployment Projects for Forest County Potawatomi Community Renewable Energy Deployment Projects for Forest County Potawatomi Community Rooftop PV installation on the Forest...

  1. New DOE-NASCAR Partnership Revs Deployment of Pollution Reducing...

    Office of Environmental Management (EM)

    New DOE-NASCAR Partnership Revs Deployment of Pollution Reducing Technologies New DOE-NASCAR Partnership Revs Deployment of Pollution Reducing Technologies September 11, 2013 -...

  2. Fuel Cell Electric Vehicles and Hydrogen Infrastructure: Deployment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cell Electric Vehicles and Hydrogen Infrastructure: Deployment and Issues Fuel Cell Electric Vehicles and Hydrogen Infrastructure: Deployment and Issues This presentation by...

  3. Solar Photovoltaic Financing: Deployment on Public Property by...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Photovoltaic Financing: Deployment on Public Property by State and Local Governments Solar Photovoltaic Financing: Deployment on Public Property by State and Local...

  4. Federal Technology Deployment Pilot: Exterior Solid State Lighting...

    Energy Savers [EERE]

    Federal Technology Deployment Pilot: Exterior Solid State Lighting Federal Technology Deployment Pilot: Exterior Solid State Lighting Presentation-given at the Fall 2011 Federal...

  5. Software_Design_Document,Testing,Deployment_and_Configuration_Management,and_Use_Manual_of_the_UUIS--a_Team_2_COMP5541-W10_Project_Approach

    E-Print Network [OSTI]

    Ahmad, Omer Shahid; Jason,; Chen,; Ilham, Najah; Lu, Jianhai; Sun, Yiwei; Wang, Tong; Zhu, Yongxin

    2010-01-01T23:59:59.000Z

    The Software Design Document has three part: 1. Overview of System Architecture;2. System Architecture;3. Database Layer and two Appendix I: Deployment and Configuration; II: Test cases

  6. Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); November 2011 Composite Data Products - Deployment (Presentation)

    SciTech Connect (OSTI)

    Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.

    2012-06-01T23:59:59.000Z

    This presentation is about the Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA). November 2011 Composite Data Products - Deployment November 30, 2011.

  7. Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); Quarter 1 2012 Composite Data Products - Deployment (Presentation)

    SciTech Connect (OSTI)

    Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.

    2012-06-01T23:59:59.000Z

    This presentation is about the Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA). Quarter 1 2012 Composite Data Products - Deployment March 8, 2012.

  8. Information Analysis Methodology for Border Security Deployment Prioritization and Post Deployment Evaluation

    SciTech Connect (OSTI)

    Booker, Paul M.; Maple, Scott A.

    2010-06-08T23:59:59.000Z

    Due to international commerce, cross-border conflicts, and corruption, a holistic, information driven, approach to border security is required to best understand how resources should be applied to affect sustainable improvements in border security. The ability to transport goods and people by land, sea, and air across international borders with relative ease for legitimate commercial purposes creates a challenging environment to detect illicit smuggling activities that destabilize national level border security. Smuggling activities operated for profit or smuggling operations driven by cross border conflicts where militant or terrorist organizations facilitate the transport of materials and or extremists to advance a cause add complexity to smuggling interdiction efforts. Border security efforts are further hampered when corruption thwarts interdiction efforts or reduces the effectiveness of technology deployed to enhance border security. These issues necessitate the implementation of a holistic approach to border security that leverages all available data. Large amounts of information found in hundreds of thousands of documents can be compiled to assess national or regional borders to identify variables that influence border security. Location data associated with border topics of interest may be extracted and plotted to better characterize the current border security environment for a given country or region. This baseline assessment enables further analysis, but also documents the initial state of border security that can be used to evaluate progress after border security improvements are made. Then, border security threats are prioritized via a systems analysis approach. Mitigation factors to address risks can be developed and evaluated against inhibiting factor such as corruption. This holistic approach to border security helps address the dynamic smuggling interdiction environment where illicit activities divert to a new location that provides less resistance to smuggling activities after training or technology is deployed at a given location. This paper will present an approach to holistic border security information analysis.

  9. Ultrasonic inspection and deployment apparatus

    DOE Patents [OSTI]

    Michaels, Jennifer E. (Ithaca, NY); Michaels, Thomas E. (Ithaca, NY); Mech, Jr., Stephen J. (Pasco, WA)

    1984-01-01T23:59:59.000Z

    An ultrasonic inspection apparatus for the inspection of metal structures, especially installed pipes. The apparatus combines a specimen inspection element, an acoustical velocity sensing element, and a surface profiling element, all in one scanning head. A scanning head bellows contains a volume of oil above the pipe surface, serving as acoustical couplant between the scanning head and the pipe. The scanning head is mounted on a scanning truck which is mobile around a circular track surrounding the pipe. The scanning truck has sufficient motors, gears, and position encoders to allow the scanning head six degrees of motion freedom. A computer system continually monitors acoustical velocity, and uses that parameter to process surface profiling and inspection data. The profiling data is used to automatically control scanning head position and alignment and to define a coordinate system used to identify and interpret inspection data. The apparatus is suitable for highly automated, remote application in hostile environments, particularly high temperature and radiation areas.

  10. Reed Reactor Facility final report, September 1, 1994--August 31, 1995

    SciTech Connect (OSTI)

    NONE

    1997-09-01T23:59:59.000Z

    This report covers the period from September 1, 1994 to August 31, 1995. Information contained in this report is intended to fulfill several purposes including the reporting requirements of the US Nuclear Regulatory Commission (USNRC), the US Department of Energy (USDOE), and the Oregon Department of Energy (ODOE). Highlights of the last year include: student participation in the program is very high; the facility has been extraordinarily successful in obtaining donated equipment from Portland General Electric, US Department of Energy, Precision Castparts, Tektronix, and other sources; the facility is developing more paid work. There were 1,115 visits of the Reactor Facility by individuals during the year. Most of these visitors were students in classes at Reed College or area universities, colleges, and high schools. During the year, the reactor was operated 225 separate times on 116 days. The total energy production was 24.6 MW-hours. The reactor staff consists of a Director, an Associate Director, a contract Health Physicist, and approximately fifteen Reed College undergraduate students as hourly employees. All radiation exposures to individuals during this year were well below 1% of the federal limits. There were no releases of liquid radioactive material from the facility and airborne releases (primarily {sup 41}Ar) were well within regulatory limits.

  11. Impacts from Deployment Barriers on the United States Wind Power Industry: Overview & Preliminary Findings (Presentation)

    SciTech Connect (OSTI)

    Lantz, E.; Tegen, S.; Hand, M.; Heimiller, D.

    2012-09-01T23:59:59.000Z

    Regardless of cost and performance some wind projects are unable to proceed to commissioning as a result of deployment barriers. Principal deployment barriers in the industry today include: wildlife, public acceptance, access to transmission, and radar. To date, methods for understanding these non-technical barriers have failed to accurately characterize the costs imposed by deployment barriers and the degree of impact to the industry. Analytical challenges include limited data and modeling capabilities. Changes in policy and regulation, among other factors, also add complexity to analysis of impacts from deployment barriers. This presentation details preliminary results from new NREL analysis focused on quantifying the impact of deployment barriers on the wind resource of the United States, the installed cost of wind projects, and the total electric power system cost of a 20% wind energy future. In terms of impacts to wind project costs and developable land, preliminary findings suggest that deployment barriers are secondary to market drivers such as demand. Nevertheless, impacts to wind project costs are on the order of $100/kW and a substantial share of the potentially developable windy land in the United States is indeed affected by deployment barriers.

  12. Los Alamos National Laboratory Tritium Technology Deployments Large Scale Demonstration and Deployment Project

    SciTech Connect (OSTI)

    McFee, J.; Blauvelt, D.; Stallings, E.; Willms, S.

    2002-02-26T23:59:59.000Z

    This paper describes the organization, planning and initial implementation of a DOE OST program to deploy proven, cost effective technologies into D&D programs throughout the complex. The primary intent is to accelerate closure of the projects thereby saving considerable funds and at the same time being protective of worker health and the environment. Most of the technologies in the ''toolkit'' for this program have been demonstrated at a DOE site as part of a Large Scale Demonstration and Deployment Project (LSDDP). The Mound Tritium D&D LSDDP served as the base program for the technologies being deployed in this project but other LSDDP demonstrated technologies or ready-for-use commercial technologies will also be considered. The project team will evaluate needs provided by site D&D project managers, match technologies against those needs and rank deployments using a criteria listing. After selecting deployments the project will purchase the equipment and provide a deployment engineer to facilitate the technology implementation. Other cost associated with the use of the technology will be borne by the site including operating staff, safety and health reviews etc. A cost and performance report will be prepared following the deployment to document the results.

  13. Monogenean Parasites of Fish 1 Peggy Reed, Ruth Francis-Floyd, RuthEllen Klinger, and Denise Petty2

    E-Print Network [OSTI]

    Watson, Craig A.

    FA28 Monogenean Parasites of Fish 1 Peggy Reed, Ruth Francis-Floyd, RuthEllen Klinger, and Denise that are commonly found on fishes and lower aquatic invertebrates. Most monogeneans are browsers that move about freely on the fish's body surface feeding on mucus and epithelial cells of the skin and gills; however

  14. Modeling and Control of Needles with Torsional Friction Kyle B. Reed, Allison M. Okamura, and Noah J. Cowan

    E-Print Network [OSTI]

    Modeling and Control of Needles with Torsional Friction Kyle B. Reed, Allison M. Okamura, and Noah-based model of the rotational dynamics of a needle being inserted into tissue. Compared to controllers] for a survey that includes robotically steered needles and insertion modeling. Specifically for prostate

  15. Controlling a Robotically Steered Needle in the Presence of Torsional Friction Kyle B. Reed Allison M. Okamura Noah J. Cowan

    E-Print Network [OSTI]

    Controlling a Robotically Steered Needle in the Presence of Torsional Friction Kyle B. Reed Allison the needle is controlled. Our experiments show that several common phantom tissues used in needle steering avoiding obstacles. See [4] for a survey that includes robotically steered needles and insertion modeling

  16. Molecular dynamics simulations of coherent optical photon emission from shock waves in Evan J. Reed,1,2,

    E-Print Network [OSTI]

    Soljaèiæ, Marin

    Molecular dynamics simulations of coherent optical photon emission from shock waves in crystals, 013904 2006 . In this work, we present analysis and molecular dynamics simulations of shock waves subject to a shock wave or solitonlike propagating excitation E. J. Reed et al., Phys. Rev. Lett. 96

  17. Gas Spring Losses in Linear Clearance Seal Compressors P.B. Bailey, M.W. Dadd, J.S. Reed*

    E-Print Network [OSTI]

    1 Gas Spring Losses in Linear Clearance Seal Compressors P.B. Bailey, M.W. Dadd, J.S. Reed* , C investigations on conventional crank driven reciprocating compressors, where the use of normal sliding seals would minimise seal losses. The widespread use of linear clearance seals in linear compressor has raised

  18. The Urgent Need for Carbon Dioxide Sequestration Klaus S. Lackner, Darryl P. Butt, Reed Jensen and Hans Ziock

    E-Print Network [OSTI]

    1 The Urgent Need for Carbon Dioxide Sequestration Klaus S. Lackner, Darryl P. Butt, Reed Jensen in this field. This memo explains why the development of a viable sequestration technology is a long term stra- tegic goal of utmost importance and why sequestration provides a goal worthy of the attention

  19. Optimal Deployment of Large Wireless Sensor Networks

    E-Print Network [OSTI]

    Toumpis, Stavros

    1 Optimal Deployment of Large Wireless Sensor Networks S. Toumpis, Member, IEEE, and Leandros, Sensor networks. I. INTRODUCTION A. Wireless Sensor Networks Wireless sensor networks are comprised of sensors that are equipped with wireless transceivers and so are able to form a wireless network [3

  20. Programming, Composing, Deploying for the Grid

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Programming, Composing, Deploying for the Grid Laurent Baduel, Fran¸coise Baude, Denis Caromel FirstName.LastName@sophia.inria.fr Abstract. Grids raise new challenges in the following way: heterogene objects and components. We especially target Grid computing, but our approach also applies to application

  1. Deployment Support Leading to Implementation

    SciTech Connect (OSTI)

    E. E. Cook

    1997-10-01T23:59:59.000Z

    The following paragraphs summarize the progress of each research project funded under the WVU Cooperative Agreement during the third quarter of 1997 (July - September 1997). The projects are arranged according to their 1997 WVU task number. WVU Focus Area 1.0: Subsurface Contaminants, Containment and Remediation Task No. 1.1: Project discontinued. Task No. 1.2: Development of Standard Test Protocols and Barrier Design Models for Desiccation Barriers (K. Amininan & S. Ameri): A number of experiments were preformed this period to evaluate the ability of the dried sand-packs to act as a barrier to liquids. Water infiltration tests were done with a constant head, dispersing 80 ml of water, and by adding water in small increments. Results indicate that when the water is spilled over the sand-pack, it has the tendency to channel through the sand-pack, significantly reducing the capacity of the dried zone to retain liquid contaminants. This appears to be largely influenced by particle size. As the particle size is reduced, the capillary forces spread the water and prevent/delay channels from forming. The measured permeability values were in agreement with those measured with air. The water retention capacity and capillary rise were largely influenced by time and showed no sensitivity to channeling. The water retention capacity tests suggest the sand-packs can retain more water than the expected. Two sets of water infiltration and drying experiments were designed to evaluate the CAB?s ability to prevent spills from spreading. Ten ml of water was injected every 20 minutes and 80 ml of water was added at one time. When injected slowly, results showed the drying process to be similar to the original drying process. The second set indicted the drying process follows a slowly declining drying with no break through. Results also suggested that air flow through the sand-pack can remove water infiltration. The air flow appeared to prevent any water channeling and thus should cause lateral distribution of the water. The large tank that accommodates the sand bed and the necessary plumbing to simulate various well configurations was received. The monitoring equipment and the sensors are currently being installed. The experimental procedures for Phase II experiments are under further investigation and will be initiated upon installation of CATC and assembly of the monitoring system. Due to insufficient operating funds, the large scale experiments will not be done this year. Task No. 1.3: Technical Support - Development of Standard Test Protocols and Barrier Design Models for In Situ Formed Barriers (B. Overbey & D. Locke, BDM Federal): The Operating Permit Renewal Request for bench scale operations in the FETC B-17 building was submitted to the FETC Lab Safety Committee for approval on 8/14/97. A review of the revised NEPA documents prepared last year indicates that these documents are still applicable for the current work. The initial design and specifications for the CATC vessel were prepared. Construction of the CATC was initiated in early July, the vessel was received August 15, 1997, and on-site work was completed this quarter.

  2. Hydraulic Hybrid Parcel Delivery Truck Deployment, Testing & Demonstration

    SciTech Connect (OSTI)

    Gallo, Jean-Baptiste

    2014-03-31T23:59:59.000Z

    Although hydraulic hybrid systems have shown promise over the last few years, commercial deployment of these systems has primarily been limited to Class 8 refuse trucks. In 2005, the Hybrid Truck Users Forum initiated the Parcel Delivery Working Group including the largest parcel delivery fleets in North America. The goal of the working group was to evaluate and accelerate commercialization of hydraulic hybrid technology for parcel delivery vehicles. FedEx Ground, Purolator and United Parcel Service (UPS) took delivery of the world’s first commercially available hydraulic hybrid parcel delivery trucks in early 2012. The vehicle chassis includes a Parker Hannifin hydraulic hybrid drive system, integrated and assembled by Freightliner Custom Chassis Corp., with a body installed by Morgan Olson. With funding from the U.S. Department of Energy, CALSTART and its project partners assessed the performance, reliability, maintainability and fleet acceptance of three pre-production Class 6 hydraulic hybrid parcel delivery vehicles using information and data from in-use data collection and on-road testing. This document reports on the deployment of these vehicles operated by FedEx Ground, Purolator and UPS. The results presented provide a comprehensive overview of the performance of commercial hydraulic hybrid vehicles in parcel delivery applications. This project also informs fleets and manufacturers on the overall performance of hydraulic hybrid vehicles, provides insights on how the technology can be both improved and more effectively used. The key findings and recommendations of this project fall into four major categories: ? Performance, ? Fleet deployment, ? Maintenance, ? Business case. Hydraulic hybrid technology is relatively new to the market, as commercial vehicles have been introduced only in the past few years in refuse and parcel delivery applications. Successful demonstration could pave the way for additional purchases of hydraulic hybrid vehicles throughout the trucking industry. By providing unbiased, third-party assessment of this “hybrid without batteries” technology, this report offers relevant, timely and valuable information to the industry.

  3. Operational Impacts of Large Deployments of Offshore Wind (Poster)

    SciTech Connect (OSTI)

    Ibanez, E.; Heaney, M.

    2014-10-01T23:59:59.000Z

    The potential operational impact of deploying 54 GW of offshore wind in the United States was examined. The capacity was not evenly distributed; instead, it was concentrated in regions with better wind quality and close to load centers (Table 1). A statistical analysis of offshore wind power time series was used to assess the effect on the power system. The behavior of offshore wind resembled that of onshore wind, despite the former presenting higher capacity factors, more consistent power output across seasons, and higher variability levels. Thus, methods developed to manage onshore wind variability can be extended and applied to offshore wind.

  4. Metals Production Requirements for Rapid Photovoltaics Deployment

    E-Print Network [OSTI]

    Kavlak, Goksin; Jaffe, Robert L; Trancik, Jessika E

    2015-01-01T23:59:59.000Z

    If global photovoltaics (PV) deployment grows rapidly, the required input materials need to be supplied at an increasing rate. In this paper, we quantify the effect of PV deployment levels on the scale of metals production. For example, we find that if cadmium telluride {copper indium gallium diselenide} PV accounts for more than 3% {10%} of electricity generation by 2030, the required growth rates for the production of indium and tellurium would exceed historically-observed production growth rates for a large set of metals. In contrast, even if crystalline silicon PV supplies all electricity in 2030, the required silicon production growth rate would fall within the historical range. More generally, this paper highlights possible constraints to the rate of scaling up metals production for some PV technologies, and outlines an approach to assessing projected metals growth requirements against an ensemble of past growth rates from across the metals production sector. The framework developed in this paper may be...

  5. Deployment Effects of Marin Renewable Energy Technologies

    SciTech Connect (OSTI)

    Brian Polagye; Mirko Previsic

    2010-06-17T23:59:59.000Z

    Given proper care in siting, design, deployment, operation and maintenance, marine and hydrokinetic technologies could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood, due to a lack of technical certainty. In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based approach to the emerging wave and tidal technology sectors in order to evaluate the impact of these technologies on the marine environment and potentially conflicting uses. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios will capture variations in technical approaches and deployment scales to properly identify and characterize environmental impacts and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential effects of these emerging technologies and focus all stakeholders onto the critical issues that need to be addressed. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory and navigational issues. The results of this study are structured into three reports: 1. Wave power scenario description 2. Tidal power scenario description 3. Framework for Identifying Key Environmental Concerns This is the second report in the sequence and describes the results of conceptual feasibility studies of tidal power plants deployed in Tacoma Narrows, Washington. The Narrows contain many of the same competing stakeholder interactions identified at other tidal power sites and serves as a representative case study. Tidal power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize impacts, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informs the process of selecting representative tidal power devices. The selection criteria is that such devices are at an advanced stage of development to reduce technical uncertainties and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. A number of other developers are also at an advanced stage of development including Verdant Power, which has demonstrated an array of turbines in the East River of New York, Clean Current, which has demonstrated a device off Race Rocks, BC, and OpenHydro, which has demonstrated a device at the European Marine Energy Test Center and is on the verge of deploying a larger device in the Bay of Fundy. MCT demonstrated their device both at Devon (UK) and Strangford Narrows (Northern Ireland). Furthermore OpenHydro, CleanCurrent, and MCT are the three devices being installed at the Minas Passage (Canada). Environmental effects will largely scale with the size of tidal power development. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nom

  6. Reed Reactor Facility annual report, September 1, 1994--August 31, 1995

    SciTech Connect (OSTI)

    NONE

    1995-12-31T23:59:59.000Z

    This report covers the period from September 1, 1994 to August 31, 1995. Information contained in this report is intended to fulfill several purposes including the reporting requirements of the US Nuclear Regulatory Commission (USNRC), the US Department of Energy (USDOE), and the Oregon Department of Energy (ODOE). Highlights of the last year include: (1) The number of new licensed student operators more than replaced the number of graduating seniors. Seven Reed College seniors used the reactor as part of their thesis projects. (2) The facility has been extraordinarily successful in obtaining donated equipment from Portland General Electric, US Department of Energy, Precision Castparts, Tektronix, and other sources. Battelle (Pacific Northwest Laboratory) has been generous in lending valuable equipment to the college. (3) The facility is developing more paid work. Income in the past academic year was much greater than the previous year, and next year should increase by even more. Additionally, the US Department of Energy`s Reactor-Use Sharing grant increased significantly this year. During the year, the reactor was operated 225 separate times on 116 days. The total energy production was 24.6 MW-hours. The reactor staff consists of a Director, an Assistant Director, a contract Health Physicist, and approximately fifteen Reed College undergraduate students as hourly employees. All radiation exposures to individuals during this year were well below one percent of the federal limits. There were no releases of liquid radioactive material from the facility and airborne releases (primarily {sup 41}Ar) were well within regulatory limits. No radioactive waste was shipped from the facility during this period.

  7. ARM - News From the Azores Deployement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheat fluxChinaNews : AMF Deployment,

  8. Light duty utility arm deployment in Hanford tank T-106

    SciTech Connect (OSTI)

    Kiebel, G.R.

    1997-07-01T23:59:59.000Z

    An existing gap in the technology for the remediation of underground waste storage tanks filled by the Light Duty Utility Arm (LDUA) System. On September 27 and 30, 1996, the LDUA System was deployed in underground storage tank T-106 at Hanford. The system performed successfully, satisfying all objectives of the in-tank operational test (hot test); performing close-up video inspection of features of tank dome, risers, and wall; and grasping and repositioning in-tank debris. The successful completion of hot testing at Hanford means that areas of tank structure and waste surface that were previously inaccessible are now within reach of remote tools for inspection, waste analysis, and small-scale retrieval. The LDUA System has become a new addition to the arsenal of technologies being applied to solve tank waste remediation challenges.

  9. Regional Effort to Deploy Clean Coal Technologies

    SciTech Connect (OSTI)

    Gerald Hill; Kenneth Nemeth; Gary Garrett; Kimberly Sams

    2009-01-31T23:59:59.000Z

    The Southern States Energy Board's (SSEB) 'Regional Effort to Deploy Clean Coal Technologies' program began on June 1, 2003, and was completed on January 31, 2009. The project proved beneficial in providing state decision-makers with information that assisted them in removing barriers or implementing incentives to deploy clean coal technologies. This was accomplished through two specific tasks: (1) domestic energy security and diversity; and (2) the energy-water interface. Milestones accomplished during the project period are: (1) Presentations to Annual Meetings of SSEB Members, Associate Member Meetings, and the Gasification Technologies Council. (2) Energy: Water reports - (A) Regional Efforts to Deploy Clean Coal Technologies: Impacts and Implications for Water Supply and Quality. June 2004. (B) Energy-Water Interface Challenges: Coal Bed Methane and Mine Pool Water Characterization in the Southern States Region. 2004. (C) Freshwater Availability and Constraints on Thermoelectric Power Generation in the Southeast U.S. June 2008. (3) Blackwater Interactive Tabletop Exercise - Decatur, Georgia April 2007. (4) Blackwater Report: Blackwater: Energy and Water Interdependency Issues: Best Practices and Lessons Learned. August 2007. (5) Blackwater Report: BLACKWATER: Energy Water Interdependency Issues REPORT SUMMARY. April 2008.

  10. Pas afgestudeerd aan de VUB en nu reeds te CERN! Isis Van Parijs en Lieselotte Moreels zijn op 5 juli geproclameerd als Master in de

    E-Print Network [OSTI]

    Steels, Luc

    Pas afgestudeerd aan de VUB en nu reeds te CERN! Isis Van Parijs en://cms.web.cern.ch/ ) Foto's: Lieselotte (links) en Isis (rechts) voor hun detector. Foto's: Isis aan het werk in de CMS detector. #12;

  11. Sustainability of Large Deployment of Photovoltaics: Environmental & Grid Integration Research

    E-Print Network [OSTI]

    Ohta, Shigemi

    1 Sustainability of Large Deployment of Photovoltaics: Environmental & Grid Integration Research Sustainability of Large Deployment of Photovoltaics: Environmental & Grid Integration Research www Photovoltaics Environmental Research Center Brookhaven National Laboratory #12;2 Source: PV Market Outlook

  12. Growth in metals production for rapid photovoltaics deployment

    E-Print Network [OSTI]

    Kavlak, Goksin

    If global photovoltaics (PV) deployment grows rapidly, the required input materials need to be supplied at an increasing rate. We quantify the effect of PV deployment levels on the scale of annual metals production. If a ...

  13. DOE Hydrogen and Fuel Cells Program Record #13007: Industry Deployed...

    Energy Savers [EERE]

    Record 13007: Industry Deployed Fuel Cell Backup Power (BuP) DOE Hydrogen and Fuel Cells Program Record 13007: Industry Deployed Fuel Cell Backup Power (BuP) This record from the...

  14. World's First Fuel Cell Cargo Trucks Deployed at Memphis International...

    Energy Savers [EERE]

    World's First Fuel Cell Cargo Trucks Deployed at Memphis International Airport World's First Fuel Cell Cargo Trucks Deployed at Memphis International Airport June 25, 2015 - 1:57pm...

  15. Dynamic instabilities imparted by CubeSat deployable solar panels

    E-Print Network [OSTI]

    Peters, Eric David

    2014-01-01T23:59:59.000Z

    In this work, multibody dynamics simulation was used to investigate the effects of solar panel deployment on CubeSat attitude dynamics. Nominal and partial/asymmetric deployments were simulated for four different solar ...

  16. Columbia Power Technologies, Inc. Deploys its Direct Drive Wave...

    Office of Environmental Management (EM)

    Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy April 9, 2013 - 12:00am...

  17. DOE Fuel Cell Technologies Office Record 14009: Industry Deployed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    09: Industry Deployed Fuel Cell Backup Power (BuP) DOE Fuel Cell Technologies Office Record 14009: Industry Deployed Fuel Cell Backup Power (BuP) This program record from the U.S....

  18. DOE Fuel Cell Technologies Office Record 14010: Industry Deployed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0: Industry Deployed Fuel Cell Powered Lift Trucks DOE Fuel Cell Technologies Office Record 14010: Industry Deployed Fuel Cell Powered Lift Trucks This program record from the U.S....

  19. Energy Department Invests Over $7 Million to Deploy Tribal Clean...

    Energy Savers [EERE]

    Invests Over 7 Million to Deploy Tribal Clean Energy Projects Energy Department Invests Over 7 Million to Deploy Tribal Clean Energy Projects November 14, 2013 - 10:00am Addthis...

  20. Building Diagnostic Market Deployment - Final Report

    SciTech Connect (OSTI)

    Katipamula, S.; Gayeski, N.

    2012-04-30T23:59:59.000Z

    Operational faults are pervasive across the commercial buildings sector, wasting energy and increasing energy costs by up to about 30% (Mills 2009, Liu et al. 2003, Claridge et al. 2000, Katipamula and Brambley 2008, and Brambley and Katipamula 2009). Automated fault detection and diagnostic (AFDD) tools provide capabilities essential for detecting and correcting these problems and eliminating the associated energy waste and costs. The U.S. Department of Energy's (DOE) Building Technology Program (BTP) has previously invested in developing and testing of such diagnostic tools for whole-building (and major system) energy use, air handlers, chillers, cooling towers, chilled-water distribution systems, and boilers. These diagnostic processes can be used to make the commercial buildings more energy efficient. The work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy's Pacific Northwest National Laboratory (PNNL) and KGS Building LLC (KGS). PNNL and KGS both believe that the widespread adoption of AFDD tools will result in significant reduction to energy and peak energy consumption. The report provides an introduction and summary of the various tasks performed under the CRADA. The CRADA project had three major focus areas: (1) Technical Assistance for Whole Building Energy Diagnostician (WBE) Commercialization, (2) Market Transfer of the Outdoor Air/Economizer Diagnostician (OAE), and (3) Development and Deployment of Automated Diagnostics to Improve Large Commercial Building Operations. PNNL has previously developed two diagnostic tools: (1) whole building energy (WBE) diagnostician and (2) outdoor air/economizer (OAE) diagnostician. WBE diagnostician is currently licensed non-exclusively to one company. As part of this CRADA, PNNL developed implementation documentation and provided technical support to KGS to implement the tool into their software suite, Clockworks. PNNL also provided validation data sets and the WBE software tool to validate the KGS implementation. OAE diagnostician automatically detects and diagnoses problems with outdoor air ventilation and economizer operation for air handling units (AHUs) in commercial buildings using data available from building automation systems (BASs). As part of this CRADA, PNNL developed implementation documentation and provided technical support to KGS to implement the tool into their software suite. PNNL also provided validation data sets and the OAE software tool to validate the KGS implementation. Finally, as part of this CRADA project, PNNL developed new processes to automate parts of the re-tuning process and transfer those process to KGS for integration into their software product. The transfer of DOE-funded technologies will transform the commercial buildings sector by making buildings more energy efficient and also reducing the carbon footprint from the buildings. As part of the CRADA with PNNL, KGS implemented the whole building energy diagnostician, a portion of outdoor air economizer diagnostician and a number of measures that automate the identification of re-tuning measures.

  1. Renewables and CHP Deployment in the UK January 2002

    E-Print Network [OSTI]

    Watson, Andrew

    Renewables and CHP Deployment in the UK to 2020 Jim Watson January 2002 Tyndall Centre for Climate Change Research Working Paper 21 #12;Renewables and CHP Deployment in the UK to 2020 Jim Watson Energy....................................................................................................6 3. The Deployment of Renewables and CHP to 2020

  2. Coiled tubing deployed ESP works well for Shell in North Sea field

    SciTech Connect (OSTI)

    Watkins, P. [Centrilift, Aberdeen (United Kingdom); Stewart, D.

    1996-06-01T23:59:59.000Z

    What is believed to be the world`s first offshore coiled tubing deployed ESP system was installed by Centrilift, a Division of Baker Hughes Ltd., on Shell Expro`s Auk field Alpha platform in March 1995. After one year, the system is working well and is now viewed as a major step forward in alternative deployment methods for ESPs. Basic features of the system and project background are overviewed here. Shell U.K. Exploration and Production (Expro) operates in the UK Sector of the North Sea on behalf of Shell and Esso. Centrilift worked closely with Shell on this high-profile project and is active on several others, all aimed at reducing the operator`s cost for installing ESPs by using alternative deployment methods.

  3. Analysis of Open Automated Demand Response Deployments in California and Guidelines to Transition to Industry Standards

    SciTech Connect (OSTI)

    Ghatikar, Girish; Riess, David; Piette, Mary Ann

    2014-01-02T23:59:59.000Z

    This report reviews the Open Automated Demand Response (OpenADR) deployments within the territories serviced by California?s investor-owned utilities (IOUs) and the transition from the OpenADR 1.0 specification to the formal standard?OpenADR 2.0. As demand response service providers and customers start adopting OpenADR 2.0, it is necessary to ensure that the existing Automated Demand Response (AutoDR) infrastructure investment continues to be useful and takes advantage of the formal standard and its many benefits. This study focused on OpenADR deployments and systems used by the California IOUs and included a summary of the OpenADR deployment from the U.S. Department of Energy-funded demonstration conducted by the Sacramento Municipal Utility District (SMUD). Lawrence Berkeley National Laboratory collected and analyzed data about OpenADR 1.0 deployments, categorized architectures, developed a data model mapping to understand the technical compatibility of each version, and compared the capabilities and features of the two specifications. The findings, for the first time, provided evidence of the total enabled load shed and average first cost for system enablement in the IOU and SMUD service territories. The OpenADR 2.0a profile specification semantically supports AutoDR system architectures and data propagation with a testing and certification program that promotes interoperability, scaled deployments by multiple vendors, and provides additional features that support future services.

  4. A Policy Deployment Model for the Ponder N. Dulay, E. Lupu, M. Sloman, N. Damianou

    E-Print Network [OSTI]

    Lupu, Emil C.

    A Policy Deployment Model for the Ponder Language N. Dulay, E. Lupu, M. Sloman, N. Damianou}@doc.ic.ac.uk Abstract Policies are rules that govern the choices in behaviour of a system. Security policies define what policies define what actions need to be carried out when specific events occur within a system or what

  5. MIRAGE: A Management Tool for the Analysis and Deployment of Network Security Policies

    E-Print Network [OSTI]

    Boyer, Edmond

    , such as firewalls, intrusion detection systems, and VPN routers. We review the two main functionalities embedded technologies, such as filter- ing of traffic, use of encrypted communications, and deployment of authentication of firewalls, NIDSs (network intrusion detection systems), and VPN (Virtual Private Network) routers, is still

  6. A Link between Guruswami--Sudan's List--Decoding and Decoding of Interleaved Reed--Solomon Codes

    E-Print Network [OSTI]

    Zeh, Alexander

    2010-01-01T23:59:59.000Z

    The Welch--Berlekamp approach for Reed--Solomon (RS) codes forms a bridge between classical syndrome--based decoding algorithms and interpolation--based list--decoding procedures for list size l=1. It returns the univariate error--locator polynomial and the evaluation polynomial of the RS code as a y-root. In this paper, we show the connection between the Welch--Berlekamp approach for a specific Interleaved Reed--Solomon code scheme and the Guruswami--Sudan principle. It turns out that the decoding of Interleaved RS codes can be formulated as a modified Guruswami--Sudan problem with a specific multiplicity assignment. We show that our new approach results in the same solution space as the Welch--Berlekamp scheme. Furthermore, we prove some important properties.

  7. ARM - News : AMF Deployment, Shouxian, China

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheat fluxChinaNews : AMF Deployment, Shouxian, China

  8. ARM - News from the Cape Cod Deployment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheat fluxChinaNews : AMF Deployment,Media ContactNews

  9. ARM - News from the Gan Island Deployment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheat fluxChinaNews : AMF Deployment,Media

  10. Property:DeploymentSector | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation,PillarPublicationType JumpDOEInvolve Jump to:DeploymentSector Jump to: navigation,

  11. Intelligent Transportation Systems Deployment Analysis System | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup | OpenHunan RunhuaInner MongoliaIntegrys EnergyIntellect

  12. New Hardware and Software Design of a Field-Deployable Real-Time Laser-Based Non-Intrusive Detection System for Measurement of True Travel Time on the Highway

    E-Print Network [OSTI]

    2001-01-01T23:59:59.000Z

    Real-Time Laser-Based Non-Intrusive Detection System forReal-Time Laser-Based Non-Intrusive Detection System foroptics. The laser-based non-intrusive detection system uses

  13. Immediate Deployment of Waste Energy Recovery Technologies at Multi Sites

    SciTech Connect (OSTI)

    Dennis Castonguay

    2012-06-29T23:59:59.000Z

    Verso Paper Corp. implemented a portfolio of 13 commercially available proven industrial technologies each exceeding 30% minimum threshold efficiency and at least 25% efficiency increase. These sub-projects are a direct result of a grant received from the Department of Energy (DOE) through its FOA 0000044 (Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment), which was funded by the American Recovery Act. These were installed at 3 sites in 2 states and are helping to reduce Verso costs, making the facilities more competitive. This created approximately 100 construction jobs (FTE's) and reduced impacted Verso facilities' expense budgets. These sub-projects were deployed at Verso paper mills located in Jay, Maine, Bucksport, Maine, and Sartell, Minnesota. The paper mills are the economic engines of the rural communities in which these mills are located. Reinvestment in waste energy recovery capital improvements is providing a stimulus to help maintain domestic jobs and to competitively position the US pulp and paper industry with rising energy costs. Energy efficiency improvements are also providing a positive environmental impact by reducing greenhouse gas emissions, the quantity of wastewater treated and discharged, and fossil fuel demand. As a result of these projects, when fully operating, Verso realized a total of approximately 1.5 TBtu/Year reduction in overall energy consumption, which is 119% of the project objectives. Note that three paper machines have since been permanently curtailed. However even with these shutdowns, the company still met its energy objectives. Note also that the Sartell mill's paper machine is down due to a recent fire which damaged the mill's electrical infrastructure (the company has not decided on the mill's future).

  14. Oasis, Online Abstract Submission and Invitation System -Program Planner http://www.abstractsonline.com/viewer/viewAbstractPrintFriendly.asp... 1 of 1 4/25/2006 9:19 AM

    E-Print Network [OSTI]

    Reed, Mark

    Oasis, Online Abstract Submission and Invitation System - Program Planner http; J.F. Klemic, None; M.A. Reed, None; F.J. Sigworth, None. OASIS - Online Abstract Submission

  15. Offshore Code Comparison Collaboration (OC3) for IEA Wind Task 23 Offshore Wind Technology and Deployment

    SciTech Connect (OSTI)

    Jonkman, J.; Musial, W.

    2010-12-01T23:59:59.000Z

    This final report for IEA Wind Task 23, Offshore Wind Energy Technology and Deployment, is made up of two separate reports, Subtask 1: Experience with Critical Deployment Issues and Subtask 2: Offshore Code Comparison Collaborative (OC3). Subtask 1 discusses ecological issues and regulation, electrical system integration, external conditions, and key conclusions for Subtask 1. Subtask 2 included here, is the larger of the two volumes and contains five chapters that cover background information and objectives of Subtask 2 and results from each of the four phases of the project.

  16. Building Diagnostic Market Deployment - Final Report

    SciTech Connect (OSTI)

    Katipamula, Srinivas; Gayeski, N.

    2012-04-01T23:59:59.000Z

    The work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy’s Pacific Northwest National Laboratory (PNNL) and KGS Building LLC (KGS). PNNL and KGS both believe that the widespread adoption of automated fault de4tection and diagnostic (AFDD) tools will result in significant reduction to energy and peak energy consumption. The report provides an introduction, and summary of the various tasks performed under the CRADA. The CRADA project had three major focus areas: 1) Technical Assistance for Whole Building Energy Diagnostician (WBE) Commercialization, 2) Market Transfer of the Outdoor Air/Economizer Diagnostician (OAE), and 3) Development and Deployment of Automated Diagnostics to Improve Large Commercial Building Operations.

  17. Advanced Engineering Informatics, 2004 (To appear) Deployment of an Ontological Framework of Functional Design Knowledge

    E-Print Network [OSTI]

    Mizoguchi, Riichiro

    design knowledge on production systems since May, 2001. An empirical evaluation by Sumitomo's engineers The importance of knowledge sharing among designers and engineers has been widely recognized in knowledgeAdvanced Engineering Informatics, 2004 (To appear) - 1 - Deployment of an Ontological Framework

  18. Smart Home in a Box: A Large Scale Smart Home Deployment

    E-Print Network [OSTI]

    Cook, Diane J.

    Smart Home in a Box: A Large Scale Smart Home Deployment Aaron S. CRANDALL a and Diane J. COOK a,1 systems. This work summa- rizes some of the existing works and introduces the Smart Home in a Box (SHiB) Project. The upcoming SHiB Project targets building 100 smart homes in several kinds of living spaces

  19. Strategies to Finance Large-Scale Deployment of Renewable Energy...

    Open Energy Info (EERE)

    Strategies to Finance Large-Scale Deployment of Renewable Energy Projects: An Economic Development and Infrastructure Approach Jump to: navigation, search Tool Summary LAUNCH TOOL...

  20. Development and Deployment of a Short Rotation Woody Crops Harvesting...

    Office of Scientific and Technical Information (OSTI)

    SRC Woody Crop Header Re-direct Destination: Demand for bioenergy sourced from woody biomass is projected to increase; however, the expansion and rapid deployment of short...

  1. Navigating Roadblocks on the Path to Advanced Biofuels Deployment

    Broader source: Energy.gov [DOE]

    Breakout Session 2: Frontiers and Horizons Session 2–C: Navigating Roadblocks on the Path to Advanced Biofuels Deployment Andrew Held, Senior Director of Feedstock Development, Virent, Inc.

  2. ARM - AMF Deployment, Los Angeles, California, to Honolulu, Hawaii

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home Deployment Operations Baseline Instruments and Data Plots at the Archive Science Plan (PDF, 1.7MB) Horizon Spirit: Tracking the Transit Experiment Planning MAGIC Full...

  3. Evaluation of Imagers in a Biological Sensing Deployment

    E-Print Network [OSTI]

    2007-01-01T23:59:59.000Z

    monitoring sensors, and solar panel. Main componentsTherefore, we have utilized solar panels to power the entiresensors - Battery - Solar panel Node Deployment Wireless/

  4. An Analytical Framework for Long Term Policy for Commercial Deployment...

    Open Energy Info (EERE)

    An Analytical Framework for Long Term Policy for Commercial Deployment and Innovation in Carbon Capture and Sequestration Technology in the United States Jump to: navigation,...

  5. Nationwide: Slashing Red Tape To Speed Solar Deployment for Homes...

    Broader source: Energy.gov (indexed) [DOE]

    Slashing Red Tape To Speed Solar Deployment for Homes and Businesses While solar panels, inverters and other hardware are more affordable than ever before (the average cost of...

  6. DOE Report Describes Progress in the Deployment of Synchrophasor...

    Open Energy Info (EERE)

    Report Describes Progress in the Deployment of Synchrophasor Technologies for Improved Grid Operations Home > Blogs > Graham7781's blog Graham7781's picture Submitted by...

  7. Energy Department Actions to Deploy Combined Heat and Power,...

    Broader source: Energy.gov (indexed) [DOE]

    Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency Wind Farm Brings Clean, Affordable Energy to Alaskan Cooperative U.S. Department of Energy...

  8. Polynomial continuation in the design of deployable structures

    E-Print Network [OSTI]

    Viquerat, Andrew David

    2012-01-10T23:59:59.000Z

    (De Focatiis & Guest, 2002). Some of the most interesting applications are to be found in satellite design, in which deployable booms, masts, antennae, radars and solar arrays are commonplace. These deployable structures are launched in the stowed... -Gru??bler-Kutzbach criterion. An example of the deployment of such an overconstrained mechanism is given in Figure 1.7. De- ployable frames have been proposed for use in space applications (Chen & You, 2006a,b) (in particular panel and antenna deployment (Pellegrino et al...

  9. Evaluation of Imagers in a Biological Sensing Deployment

    E-Print Network [OSTI]

    2007-01-01T23:59:59.000Z

    Therefore, we have utilized solar panels to power the entiremonitoring sensors, and solar panel. Main componentssensors - Battery - Solar panel Node Deployment Wireless/

  10. Credit Enhancements and Capital Markets to Fund Solar Deployment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Credit Enhancements and Capital Markets to Fund Solar Deployment: Leveraging Public Funds to Open Private Sector Investment Michael Mendelsohn and Marley Urdanick National...

  11. Fuel Cell Technologies Office Record 14010 ? Industry Deployed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10 (Rev. 1) Date: 08122014 Title: Industry Deployed Fuel Cell Powered Lift Trucks Originators: Pete Devlin, Kristian Kiuru Approved by: Sunita Satyapal and Rick Farmer Date: 08...

  12. U.S. Electric Power Futures: Preliminary Results (Presentation)

    SciTech Connect (OSTI)

    Lopez, A.; Logan, J.; Mai, T.

    2012-08-01T23:59:59.000Z

    This presentation shows key findings of an effort to simulate the evolution of the U.S. power sector under a number of policy and technology scenarios using the Regional Energy Deployment System (ReEDS) Model.

  13. Modeling the Impact of State and Federal Incentives on Concentrating Solar Power Market Penetration

    SciTech Connect (OSTI)

    Blair, N.; Short, W.; Mehos, M.

    2008-03-01T23:59:59.000Z

    This paper presents methodology and results from the Regional Energy Deployment System Model (ReEDS) examining the ability of concentrating solar power (CSP), other renewables, and electricity storage to contribute to the U.S. electric sector.

  14. Technology Deployment Annual Report 2014 December

    SciTech Connect (OSTI)

    George K. Arterburn

    2014-12-01T23:59:59.000Z

    This report is a summary of key Technology Deployment activities and achievements for 2014, including intellectual property, granted copyrights, royalties, license agreements, CRADAs, WFOs and Technology-Based Economic Development. Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. INL employees also work cooperatively with researchers and technical staff from the university and industrial sectors to further develop emerging technologies. In our multinational global economy, INL is contributing to the development of the next generation of engineers and scientists by licensing software to educational instiutitons throughout the world. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to other parties. This report was compiled from primary records, which were readily available to the INL’s Office of Technology Deployment. However, the accomplishments cataloged in the report reflect the achievements and creativity of the researchers, technicians, support staff, and operators of the INL workforce.

  15. Deployment of ITS: A Summary of the 2010 National Survey Results

    SciTech Connect (OSTI)

    Gordon, Stephen Reed [ORNL; Trombly, Jeff [Science Applications International Corporation (SAIC), Oak Ridge, TN

    2011-08-01T23:59:59.000Z

    This report presents summary results of the 2010 ITS Deployment Tracking survey, the most recent survey conducted by the ITS Deployment Tracking Project. The U.S. Department of Transportation and its member agencies, including the Research and Innovative Technology Administration, have pursued a research and development agenda, the Intelligent Transportation System (ITS) Program, designed to integrate the latest in information technologies to improve the safety, mobility, and reliability of surface transportation modes. Within metropolitan areas, implementation of these advanced technologies has been accomplished by a variety of state and local transportation and emergency management agencies as well as the private sector. In order to measure the rate of ITS deployment within the nation s largest metropolitan areas, the ITS Deployment Tracking Project has conducted a nationwide survey of state and local transportation and emergency management agencies nearly every year since 1997. The results presented in this report are intended to be a summary of the entire database from the 2010 survey. Access to the complete survey results and previous national surveys are available on-line at http://www.itsdeployment.its.dot.gov. The website also provides access to survey results in the form of downloadable reports, including a survey summary for each survey type and fact sheets. Nearly 1,600 surveys were distributed to state and local transportation agencies in 2010. A total of seven (7) survey types were distributed including: Freeway Management, Arterial Management, Transit Management, Transportation Management Center (TMC), Electronic Toll Collection (ETC), Public Safety Law Enforcement, and Public Safety Fire/Rescue. Among other things, the data collection results indicate that ITS has moved from being experimental to mainstream and interest in continuing investments in ITS continues to be very strong. When asked about future deployment plans, one-third to three-fourths of the different agency types report they will expand current deployments and about half are planning to invest in new technologies over the next three years.

  16. More Than 1,000 Fuel Cell Units Deployed Through DOE ARRA Funding (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-07-01T23:59:59.000Z

    This NREL Hydrogen and Fuel Cell Technical Highlight describes how early market end users are operating 1,111 fuel cell units at 301 sites in 20 states with funding from the U.S. Department of Energy Fuel Cell Technologies Program and analysis by NREL. The American Recovery and Reinvestment Act (ARRA) funded the deployment of approximately 1,000 fuel cell systems in key early markets to accelerate the commercialization and deployment of fuel cells and fuel cell manufacturing, installation, maintenance, and support services. In support of the ARRA fuel cell deployment objectives, NREL analyzes and validates the technology in real-world applications, reports on the technology status, and facilitates the development of fuel cell technologies, manufacturing, and operations in strategic markets-including material handling equipment, backup power, and stationary power-where fuel cells can compete with conventional technologies. NREL is validating hydrogen and fuel cell systems in real-world settings through data collection, analysis, and reporting. The fuel cell and infrastructure analysis provides an independent, third-party assessment that focuses on fuel cell system and hydrogen infrastructure performance, operation, maintenance, use, and safety. An objective of the ARRA fuel cell project-to deploy approximately 1,000 fuel cell systems in key early markets - has been met in two years. By the end of 2011, 504 material handling equipment (MHE) fuel cell units were operating at 8 facilities and 607 backup power fuel cell units were operating at 293 sites. MHE and backup power are two markets where fuel cells are capable of meeting the operating demands, and deployments can be leveraged to accelerate fuel cell commercialization.

  17. Robustness improvement of polyhedral mesh method for airbag deployment simulations.

    E-Print Network [OSTI]

    Vuik, Kees

    Robustness improvement of polyhedral mesh method for airbag deployment simulations. TU Delft to simulate the deployment of airbags. The solution is approximated using Euler's equations d dt qd + S (q the boundary of the object immersed in the flow, the airbag. The geometry of the airbag is preserved

  18. Strictly Localized Sensor Self-Deployment for Optimal Focused Coverage

    E-Print Network [OSTI]

    Stojmenovic, Ivan

    resume. We prove that they both yield a connected network with maximized hole-free area coverage. To our on convergence time, energy consumption, and node collision. Index Terms--Coverage, self-deployment, localized-deployment decision independently, using k-hop neighborhood information for a constant k. In the case of k ¼ 1, we

  19. Dynamic Cooperative Coevolutionary Sensor Deployment via Localized Fitness Evaluation

    E-Print Network [OSTI]

    Chen, Yuanzhu Peter

    Dynamic Cooperative Coevolutionary Sensor Deployment via Localized Fitness Evaluation Xingyan Jiang used to evaluate the quality of sensor placement. The first one is sensing coverage, which is the area interest in autonomous sensor deployment, where a sensor can only communicate with those within a limited

  20. Solar Photovoltaic Financing: Deployment on Public Property by State and Local Governments

    SciTech Connect (OSTI)

    Cory, K.; Coughlin, J.; Coggeshall, C.

    2008-05-01T23:59:59.000Z

    State and local governments have grown increasingly aware of the economic, environmental, and societal benefits of taking a lead role in U.S. implementation of renewable energy, particularly distributed photovoltaic (PV) installations. Recently, solar energy's cost premium has declined as a result of technology improvements and an increase in the cost of traditional energy generation. At the same time, a nationwide public policy focus on carbon-free, renewable energy has created a wide range of financial incentives to lower the costs of deploying PV even further. These changes have led to exponential increases in the availability of capital for solar projects, and tremendous creativity in the development of third-party ownership structures. As significant users of electricity, state and local governments can be an excellent example for solar PV system deployment on a national scale. Many public entities are not only considering deployment on public building rooftops, but also large-scale applications on available public lands. The changing marketplace requires that state and local governments be financially sophisticated to capture as much of the economic potential of a PV system as possible. This report examines ways that state and local governments can optimize the financial structure of deploying solar PV for public uses.

  1. Quality Control, Testing, and Deployment Results in the NIF ICCS

    SciTech Connect (OSTI)

    Woodruff, J P; Casavant, D; Cline, B D; Gorvad, M R

    2001-10-11T23:59:59.000Z

    The strategy used to develop the NIF Integrated Computer Control System (ICCS) calls for incremental cycles of construction and formal test to deliver a total of 1 million lines of code. Each incremental release takes four to six months to implement specific functionality and culminates when offline tests conducted in the ICCS Integration and Test Facility verify functional, performance, and interface requirements. Tests are then repeated on line to confirm integrated operation in dedicated laser laboratories or ultimately in the NIF. Test incidents along with other change requests are recorded and tracked to closure by the software change control board (SCCB). Annual independent audits advise management on software process improvements. Extensive experience has been gained by integrating controls in the prototype laser preamplifier laboratory. The control system installed in the preamplifier lab contains five of the ten planned supervisory subsystems and seven of sixteen planned front-end processors (FEPs). Beam alignment, timing, diagnosis and laser pulse amplification up to 20 joules was tested through an automated series of shots. Other laboratories have provided integrated testing of six additional FEPs. Process measurements including earned-value, product size, and defect densities provide software project controls and generate confidence that the control system will be successfully deployed.

  2. Cyber Physical Systems: The Next Computing Revolution

    E-Print Network [OSTI]

    Ingrand, François

    . Automotive Telematics 30-90 processors per car o Engine control, Break system, Airbag deployment system o

  3. Technology Deployment Annual Report 2013 December

    SciTech Connect (OSTI)

    N /A

    2014-01-01T23:59:59.000Z

    Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. INL employees also work cooperatively with researchers and technical staff from the university and industrial sectors to further develop emerging technologies. In a multinational global economy, INL is contributing to the development of the next generation of engineers and scientists by licensing software to educational institutions throughout the world. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to other parties. This report was compiled from primary records, which were readily available to the INL’s Office of Technology Deployment. However, the accomplishments cataloged in the report reflect the achievements and creativity of the researchers, technicians, support staff, and operators of the INL workforce.

  4. Integrated Planning and Image-Guided Control for Planar Needle Steering Kyle B. Reed, Vinutha Kallem, Ron Alterovitz, Ken Goldberg, Allison M. Okamura, Noah J. Cowan

    E-Print Network [OSTI]

    Alterovitz, Ron

    Integrated Planning and Image-Guided Control for Planar Needle Steering Kyle B. Reed, Vinutha kinematic nonholonomic model of bevel- tip needle steering. We use slighly different needles here that have steering work. By integrating planning, control, and torsion compensation, we demonstrate both accurate

  5. iREED 2008 Renewable Energies and Eco-Design in Electrical Engineering, 10-11 December 2008 ECO-DESIGN OF ELECTRO-MECHANICAL ENERGY CONVERTERS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    iREED 2008 Renewable Energies and Eco-Design in Electrical Engineering, 10-11 December 2008 ECO-DESIGN OF ELECTRO-MECHANICAL ENERGY CONVERTERS: THE CASE OF THE THREE-PHASE SQUIRREL-CAGE INDUCTION MACHINE V-design problematic on the single criterion of energy for electro-mechanical energy converters through the model

  6. Analysis of Open Automated Demand Response Deployments in California

    E-Print Network [OSTI]

    LBNL-6560E Analysis of Open Automated Demand Response Deployments in California and Guidelines The work described in this report was coordinated by the Demand Response Research. #12; #12;Abstract This report reviews the Open Automated Demand Response

  7. Robustness improvement of polyhedral mesh method for airbag deployment simulations.

    E-Print Network [OSTI]

    Vuik, Kees

    Robustness improvement of polyhedral mesh method for airbag deployment simulations. TU Delft Description Airbag flexible membrane. Modeled by equations of elasticity, solved numerically using FEM Flow and Problem Description Airbag triangulation intersects in arbitrary way the Cartesian Mesh. Cartesian cells

  8. Creating a Comprehensive Solar Water Heating Deployment Strategy

    SciTech Connect (OSTI)

    Focus Marketing Services

    1999-08-18T23:59:59.000Z

    This report details the results of a research conducted in 1998 and 1999 and outlines a marketing deployment plan designed for businesses interested in marketing solar water heaters in the new home industry.

  9. Navigating Roadblocks on the Path to Advanced Biofuels Deployment

    Broader source: Energy.gov [DOE]

    Breakout Session 2: Frontiers and Horizons Session 2–C: Navigating Roadblocks on the Path to Advanced Biofuels Deployment Arunas Chesonis, Chief Executive Officer and Chairman of the Board, Sweetwater Energy

  10. Deployment algorithms for multi-agent exploration and patrolling

    E-Print Network [OSTI]

    Volkov, Mikhail, S.M. Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    Exploration and patrolling are central themes in distributed robotics. These deployment scenarios have deep fundamental importance in robotics, beyond the most obvious direct applications, as they can be used to model a ...

  11. Game Theory and Femtocell Communications: Making Network Deployment Feasible

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    deployed and controlled by end-users who desire better indoor signal transmission and reception' homes without the need of additional expensive cellular towers. At the same time, FBSs offload traffic

  12. Fuel Cell Technologies Office Record 14009 ? Industry Deployed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    09 (Rev. 1) Date: 08122014 Title: Industry Deployed Fuel Cell Backup Power (BuP) Originators: Pete Devlin, Kristian Kiuru Approved by: Sunita Satyapal and Rick Farmer Date: 08...

  13. Regulatory Instruments for Deployment of Clean Energy Technologies

    E-Print Network [OSTI]

    Pérez-Arriaga, Ignacio J.

    Answering to the formidable challenge of climate change calls for a quick transition to a future economy with a drastic reduction in GHG emissions. And this in turn requires the development and massive deployment of new ...

  14. Strictly Localized Sensor Self-Deployment for Optimal Focused Coverage

    E-Print Network [OSTI]

    Santoro, Nicola

    on convergence time, energy consumption, and node collision. Index Terms--Coverage, Self-deployment, Localized and Telecommunications, FTN, University of Novi Sad, Serbia. Email: stojmenovic@gmail.com their degree of danger. Another

  15. Energy Results of ISO 50001 Deployment by Program Administrators

    E-Print Network [OSTI]

    Brown, K.; Gilless, C.; Milward, R.

    2013-01-01T23:59:59.000Z

    Early Results of ISO 50001 Deployment by Utility Programs CHAD GILLESS PRACTICE LEAD, STRATEGIC ENERGY MANAGEMENT ENERNOC PORTLAND, OREGON KIM BROWN ASSOCIATE ENERNOC PORTLAND, OREGON DRESDEN SKEES- GREGORY SUSTAINABLE... Solutions Portland, OR Portland, OR Walnut Creek, CA ESL-IE-13-05-12 Proceedings of the Thrity-Fifth Industrial Energy Technology Conference New Orleans, LA. May 21-24, 2013 2 Presentation Objectives ? Overview of current status ISO deployments...

  16. Deployment of High Resolution Real-Time Distribution Level Metering on Maui: Preprint

    SciTech Connect (OSTI)

    Bank, J.

    2013-01-01T23:59:59.000Z

    In order to support the ongoing Maui Smart Grid demonstration project advanced metering has been deployed at the distribution transformer level in Maui Electric Company's Kihei Circuit on the Island of Maui. This equipment has been custom designed to provide accurately time-stamped Phasor and Power Quality data in real time. Additionally, irradiance sensors have been deployed at a few selected locations in proximity to photovoltaic (PV) installations. The received data is being used for validation of existing system models and for impact studies of future system hardware. Descriptions of the hardware and its installation, and some preliminary metering results are presented. Real-time circuit visualization applications for the data are also under development.

  17. A report on IPv6 deployment activities and issues at Sandia National Laboratories:FY2007.

    SciTech Connect (OSTI)

    Tolendino, Lawrence F.; Eldridge, John M.; Hu, Tan Chang; Maestas, Joseph H.

    2007-06-01T23:59:59.000Z

    Internet Protocol version 4 (IPv4) has been a mainstay of the both the Internet and corporate networks for delivering network packets to the desired destination. However, rapid proliferation of network appliances, evolution of corporate networks, and the expanding Internet has begun to stress the limitations of the protocol. Internet Protocol version 6 (IPv6) is the replacement protocol that overcomes the constraints of IPv4. As the emerging Internet network protocol, SNL needs to prepare for its eventual deployment in international, national, customer, and local networks. Additionally, the United States Office of Management and Budget has mandated that IPv6 deployment in government network backbones occurs by 2008. This paper explores the readiness of the Sandia National Laboratories network backbone to support IPv6, the issues that must be addressed before a deployment begins, and recommends the next steps to take to comply with government mandates. The paper describes a joint work effort of the Sandia National Laboratories ASC WAN project team and members of the System Analysis & Trouble Resolution, the Communication & Network Systems, and Network System Design & Implementation Departments.

  18. Optical Sensor Technology Development and Deployment

    SciTech Connect (OSTI)

    B. G. Parker

    2005-01-24T23:59:59.000Z

    The objectives of this ESP (Enhanced Surveillance) project are to evaluate sensor performance for future aging studies of materials, components and weapon systems. The goal of this project is to provide analysis capability to experimentally identify and characterize the aging mechanisms and kinetics of Core Stack Assembly (CSA) materials. The work on fiber optic light sources, hermetic sealing of fiber optics, fiber optic hydrogen sensors, and detection systems will be discussed.

  19. Stirling engine ready for subsea deployment

    SciTech Connect (OSTI)

    Not Available

    1985-05-01T23:59:59.000Z

    The key technologies are now in place to provide for long-term independent diver support on the seabed, in place of large and costly surface support spreads. The lack of a compact air-independent energy source in the medium power range has prevented the evolution of underwater autonomous offshore operations. Five key advancements will now permit surface-independence in the performance of many subsea tasks: efficient and compact power and heat energy, computerized systems for navigation and instrumentation, composite materials for high pressure, low weight gas storage, closed-circuit breathing systems for divers, and underwater robotics and artificial intelligence.

  20. Evaluating Solar Resource Data Obtained from Multiple Radiometers Deployed at the National Renewable Energy Laboratory: Preprint

    SciTech Connect (OSTI)

    Habte, A.; Sengupta, M.; Andreas, A.; Wilcox, S.; Stoffel, T.

    2014-09-01T23:59:59.000Z

    Solar radiation resource measurements from radiometers are used to predict and evaluate the performance of photovoltaic and concentrating solar power systems, validate satellite-based models for estimating solar resources, and advance research in solar forecasting and climate change. This study analyzes the performance of various commercially available radiometers used for measuring global horizontal irradiances (GHI) and direct normal irradiances (DNI). These include pyranometers, pyrheliometers, rotating shadowband irradiometers, and a pyranometer with a shading ring deployed at the National Renewable Energy Laboratory's Solar Radiation Research Laboratory (SRRL). The radiometers in this study were deployed for one year (from April 1, 2011, through March 31, 2012) and compared to measurements from radiometers with the lowest values of estimated measurement uncertainties for producing reference GHI and DNI.

  1. ATLAS I/O Performance Optimization in As-Deployed Environments

    E-Print Network [OSTI]

    Maier, Thomas; The ATLAS collaboration; Bhimji, Wahid; Elmsheuser, Johannes; van Gemmeren, Peter; Malon, David; Krumnack, Nils

    2015-01-01T23:59:59.000Z

    I/O is a fundamental determinant in the overall performance of physics analysis and other data-intensive scientific computing. It is, further, crucial to effective resource delivery by the facilities and infrastructure that support data-intensive science. To understand I/O performance, clean measurements in controlled environments are essential, but effective optimization requires as well an understanding of the complicated realities of as-deployed environments. These include a spectrum of local and wide-area data delivery and resilience models, heterogeneous storage systems, matches and mismatches between data organization and access patterns, multi-user considerations that may help or hinder individual job performance, and more. The ATLAS experiment has organized an interdisciplinary working group of I/O, persistence, analysis framework, distributed infrastructure, site deployment, and external experts to understand and improve I/O performance in preparation for Run 2 of the Large Hadron Collider. The adopt...

  2. A Buildings Module for the Stochastic Energy Deployment System

    E-Print Network [OSTI]

    Marnay, Chris

    2008-01-01T23:59:59.000Z

    basis for the Annual Energy Outlook (AEO), and subsequentlyComparisons between the Annual Energy Outlook 2007 (AEO-07),2007a & 2008: Annual Energy Outlook 2007/8: With Projections

  3. Deploying Systems Interoperability and Customer Choice within Smart Grid

    E-Print Network [OSTI]

    Ghatikar, Girish

    2014-01-01T23:59:59.000Z

    twiki- sggrid/bin/view/SmartGrid/PriorityActionPlanssggrid/bin/view/SmartGrid/TTMeetingOnPriceCommunications The

  4. A Buildings Module for the Stochastic Energy Deployment System

    E-Print Network [OSTI]

    Marnay, Chris

    2008-01-01T23:59:59.000Z

    EIA, 2008a: Natural gas wellhead price, http://tonto.eia.doe.gov/dnav/ng/hist/n9190us3m.htm F.W. Dodge 1991: Building Stock Database

  5. Large Monitoring Systems: Data Analysis, Design and Deployment

    E-Print Network [OSTI]

    Rajagopal, Ram

    2009-01-01T23:59:59.000Z

    4):269– A. Das and D. Kempe. Algorithms for subset selectionreturns property [Das and Kempe, 2008; Krause et al. , 2007]the covariance by Das and Kempe [2008]. Note that we assume

  6. Project Profile: Deployable Commercial Rooftop Solar Electric System

    Broader source: Energy.gov [DOE]

    Individual PV modules are mechanically interconnected using flexible hinges that allow a string of modules to be folded for transportation and storage into a compact form and then unfolded for...

  7. Large Monitoring Systems: Data Analysis, Design and Deployment

    E-Print Network [OSTI]

    Rajagopal, Ram

    2009-01-01T23:59:59.000Z

    1989. A. Asadpour and A. Saberi. An approximation algorithmmodular), Asadpour and Saberi [2007] developed an algorithm

  8. Field deployable dynamic lighting system for turbid water imaging

    E-Print Network [OSTI]

    Gorman, Geoffrey Allen

    2011-01-01T23:59:59.000Z

    The ocean depths provide an ever changing and complex imaging environment. As scientists and researches strive to document and study more remote and optically challenging areas, specifically scatter-limited environments. ...

  9. A Buildings Module for the Stochastic Energy Deployment System

    E-Print Network [OSTI]

    Marnay, Chris

    2008-01-01T23:59:59.000Z

    and Ryan H Wiser, 2007: Real Options Valuation of US Federalforecasting to consider real options and other techniques

  10. Large Monitoring Systems: Data Analysis, Design and Deployment

    E-Print Network [OSTI]

    Rajagopal, Ram

    2009-01-01T23:59:59.000Z

    5.6 Trading off Power andof Theorem 5.5.1. Trading off Power and Accuracy As arguedimplementation. Trading off power and accuracy We also

  11. A Buildings Module for the Stochastic Energy Deployment System

    E-Print Network [OSTI]

    Marnay, Chris

    2008-01-01T23:59:59.000Z

    F.W. Dodge 1991: Building Stock Database Methodology andEnd-Use Flow Maps for the Buildings Sector, D.B. Belzer,N ATIONAL L ABORATORY A Buildings Module for the Stochastic

  12. Large Monitoring Systems: Data Analysis, Design and Deployment

    E-Print Network [OSTI]

    Rajagopal, Ram

    2009-01-01T23:59:59.000Z

    groups: intrusive and non-intrusive. Intrusive sensors arefor traffic monitoring. Non-intrusive sensors require lessones. An example of a non-intrusive sensor is a digital

  13. Rapid Deployment Shelter System | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnicalPurchase, Delivery,Assistance ProgramLivingstonRandallRapid

  14. Rapid Deployment Shelter System, Application | Y-12 National Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnicalPurchase, Delivery,Assistance

  15. National Geothermal Data System Deployed to Serve Industry | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005 attheMohammed Khan -Department of Energy 8, 2011,Industry

  16. National Geothermal Data System Deployed | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005 attheMohammed Khan -Department of Energy 8, 2011,IndustryIn support

  17. Nevada Deploys Grid-Connected Electricity from Enhanced Geothermal Systems

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005 attheMohammed Khan -Department ofDepartmentDepartment of Energyto|

  18. Stochastic Energy Deployment System (SEDS) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt LtdShawangunk,SoutheastSt.SteepStimulation Prediction Models JumpStochastic

  19. Stochastic Energy Deployment System (SEDS) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with formSoutheastern IL Elec Coop,Lanka-DLRStandardStaxeraEthanolStirling

  20. Environmental Mitigation Technology (Innovative System Testing)-Deployment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:RevisedAdvisoryStandardGeneration |10 DOE VehicleJustice:and Testing of the Alden

  1. Scaling up and deployment of FGD in the US (1960s-2009)

    E-Print Network [OSTI]

    .3 DEPLOYMENT UNDER EMISSIONS TRADING: THE 1990S AND 2000S ..................18 4 INTERACTION WITH OTHER

  2. NREL: Technology Deployment - Climate Neutral Research Campuses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCostBuilding Energy Systems NREL

  3. Equipment compatibility and logistics assessment for containment foam deployment.

    SciTech Connect (OSTI)

    McRoberts, Vincent M.; Martell, Mary-Alena; Jones, Joseph A.

    2005-09-01T23:59:59.000Z

    The deployment of the Joint Technical Operations Team (JTOT) is evolving toward a lean and mobile response team. As a result, opportunities to support more rapid mobilization are being investigated. This study investigates three specific opportunities including: (1) the potential of using standard firefighting equipment to support deployment of the aqueous foam concentrate (AFC-380); (2) determining the feasibility and needs for regional staging of equipment to reduce the inventory currently mobilized during a JTOT response; and (3) determining the feasibility and needs for development of the next generation AFC-380 to reduce the volume of foam concentrate required for a response. This study supports the need to ensure that requirements for alternative deployment schemes are understood and in place to support improved response activities.

  4. Remote infrared imaging system for scanning hazardous waste tanks

    SciTech Connect (OSTI)

    Morris, K.L.H.

    1994-01-01T23:59:59.000Z

    This paper provides a description of the deployment of an infrared imaging system in an underground radioactive waste storage tank. The system was made for surface scanning to detect regions of high heat if present. The deployment described was for testing the system`s capabilities as well as the logistics of deployment and the system`s functionality in the field. The system was deployed and removed successfully providing a surface scan of the tank. Some improvements are recommended.

  5. QUARTERLY NUCLEAR POWER DEPLOYMENT SUMMARY OCTOBER 2014

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCO Overview OCHCODepartment ofRecipientsandPublicPump SystemsPutting It314

  6. Strategies for Demonstration and Early Deployment of Carbon Capture and Storage: A Technical and Economic Assessment of Capture Percentage

    E-Print Network [OSTI]

    and Policy at the Massachusetts Institute of Technology ABSTRACT Carbon capture and storage (CCSStrategies for Demonstration and Early Deployment of Carbon Capture and Storage: A Technical and Astronautics and Engineering Systems Director, Technology and Policy Program Accepted by William M. Deen Carbon

  7. Leading the Nation in Clean Energy Deployment (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-07-01T23:59:59.000Z

    This document summarizes key efforts and projects that are part of the DOE/NREL Integrated Deployment effort to integrated energy efficiency and renewable energy technologies in cities, states, island locations, and communities around the world. The U.S. Department of Energy (DOE) is pursuing an aggressive, scalable, and replicable strategy to accelerate market adoption of clean energy solutions to power homes, businesses, and vehicles. Using the comprehensive Integrated Deployment approach developed by the National Renewable Energy Laboratory (NREL), DOE partners with communities, cities, states, federal agencies, and territories to identify and implement a variety of efficiency and renewable energy technology solutions.

  8. ROBOTICS IN HAZARDOUS ENVIRONMENTS - REAL DEPLOYMENTS BY THE SAVANNAH RIVER NATIONAL LABORATORY

    SciTech Connect (OSTI)

    Kriikku, E.; Tibrea, S.; Nance, T.

    2010-09-27T23:59:59.000Z

    The Research & Development Engineering (R&DE) section in the Savannah River National Laboratory (SRNL) engineers, integrates, tests, and supports deployment of custom robotics, systems, and tools for use in radioactive, hazardous, or inaccessible environments. Mechanical and electrical engineers, computer control professionals, specialists, machinists, welders, electricians, and mechanics adapt and integrate commercially available technology with in-house designs, to meet the needs of Savannah River Site (SRS), Department of Energy (DOE), and other governmental agency customers. This paper discusses five R&DE robotic and remote system projects.

  9. Solar Photovoltaic Financing: Residential Sector Deployment

    SciTech Connect (OSTI)

    Coughlin, J.; Cory, K.

    2009-03-01T23:59:59.000Z

    This report presents the information that homeowners and policy makers need to facilitate PV financing at the residential level. The full range of cash payments, bill savings, and tax incentives is covered, as well as potentially available solar attribute payments. Traditional financing is also compared to innovative solutions, many of which are borrowed from the commercial sector. Together, these mechanisms are critical for making the economic case for a residential PV installation, given its high upfront costs. Unfortunately, these programs are presently limited to select locations around the country. By calling attention to these innovative initiatives, this report aims to help policy makers consider greater adoption of these models to benefit homeowners interested installing a residential PV system.

  10. MAP SKILLS FOR ENVIRONMENTAL SCIENCE Gord Beck | Cathy Moulder | Lloyd Reeds Map Collection, Mills Library

    E-Print Network [OSTI]

    Haykin, Simon

    system) Military (Grid system) These 3 systems appear on Canadian topographic maps All systems use the intersection of an X and Y plane MAP REFERENCING SYSTEMS #12;Universal Transverse Mercator (UTM) Grid the UTM Grid It appears as BLUE lines on the surface of the map, and is indicated by BLUE numbers outside the

  11. FROGi: Fractal components deployment over OSGi Mikael Desertot1 3

    E-Print Network [OSTI]

    Donsez, Didier

    FROGi: Fractal components deployment over OSGi Mikael Desertot1 3 , Humberto Cervantes2 and Didier, a proposal to support continuous de- ployment activities inside Fractal, a hierarchical component model of Fractal components. With FROGi, it is possible to automate the assembly of a Fractal component application

  12. Development and Deployment at Facebook Dror G. Feitelson

    E-Print Network [OSTI]

    Feitelson, Dror

    Development and Deployment at Facebook Dror G. Feitelson Hebrew University Eitan Frachtenberg Facebook Kent L. Beck Facebook Abstract More than one billion users log in to Facebook at least once-end. Information on Facebook's architecture and other software components is available elsewhere. Keywords D.2.10.i

  13. Deployment of Broadband Infrastructure in the Region of Western Greece

    E-Print Network [OSTI]

    Bouras, Christos

    Deployment of Broadband Infrastructure in the Region of Western Greece Antonios Alexiou1, Patras, Greece 3 University of Ioannina, Greece 4 University of Aegean, Greece {alexiua, bouras, igglesis that is taking place in the Region of Western Greece in order to develop state-of-the- art broadband

  14. Enforcing Architecture and Deployment Constraints of Distributed Component-based

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    .kadri@alkante.com In the component-based software development process, the formalisation of architectural choices makes possible Introduction Architectural choices should be preserved throughout the software lifecycle soEnforcing Architecture and Deployment Constraints of Distributed Component-based Software Chouki

  15. China's rapid deployment of SO2 scrubbers Robert H. Williamsb

    E-Print Network [OSTI]

    at coal power plants in 2006 and 2007. Scrubbers were installed in each of these years at plants with more emissions control at coal power plants. This paper describes and seeks to understand China's recent rapid deployment of SO2 scrubbers at coal power plants. For perspective this activity in China is compared

  16. Visual Design of Service Deployment in Complex Physical Environments

    E-Print Network [OSTI]

    Celentano, Augusto

    Visual Design of Service Deployment in Complex Physical Environments Augusto Celentano and Fabio for in- teractive services in complex physical environments using a knowl- edge based approach to define the relations between the environ- ment and the services, and a visual interface to check the associated

  17. DEPLOYMENT OF JAVA-BASED COMPONENTS IN EMBEDDED ENVIRONMENT*

    E-Print Network [OSTI]

    , which have to be adapted, are the deployment process and the runtime environment. The rest different capabilities like different user input and output methods, different provided API, etc of the paper is as follows. The rest of this Section briefly describes the SOFA 2.0 (for short, SOFA in further

  18. Scenarios for a Worldwide Deployment of Nuclear Energy Production

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    and the transition to sustainable 4th generation nuclear reactors. We show that at least one comprehensive of sustainable, intensive nuclear power generation. Introduction The worldwide demand for primary energy, F-38026 Grenoble Cedex, FRANCE Intensive worldwide deployment of nuclear power could prove necessary

  19. Poster Abstract: Community Sensor Grids Deployment and Usage

    E-Print Network [OSTI]

    Bhattacharya, Amiya

    and Informatics Arizona State University Tempe, AZ 85287 partha@asu.edu Amiya Bhattacharya Department of Computer Science New Mexico State University Las Cruces, NM 88003 amiya@nmsu.edu Meddage S. Fernando Department is that individuals or small community agencies may deploy sensors to cover their own property, but also make them

  20. Evaluation of Future Energy Technology Deployment Scenarios for

    E-Print Network [OSTI]

    Subtask 2.1 Report By the University of Hawaii Hawaii Natural Energy Institute School of Ocean and EarthEvaluation of Future Energy Technology Deployment Scenarios for the Big Island Prepared for the U.S. Department of Energy Office of Electricity Delivery and Energy Reliability Under Award No. DE-FC-06NT42847

  1. Sustainability of Very Large Photovoltaic DeploymentSustainability of Very Large Photovoltaic Deployment email: vmf5@columbia.edu

    E-Print Network [OSTI]

    Ohta, Shigemi

    1 Sustainability of Very Large Photovoltaic DeploymentSustainability of Very Large Photovoltaic for Life Cycle Analysis Columbia University and National Photovoltaics Environmental Research Center, 2006 - Fthenakis & Alsema, Progress in Photovoltaics, 14, 275, 2006 #12;9 0 200 400 600 800 1000 1200

  2. Deployment Effects of Marine Renewable Energy Technologies: Wave Energy Scenarios

    SciTech Connect (OSTI)

    Mirko Previsic

    2010-06-17T23:59:59.000Z

    Given proper care in siting, design, deployment, operation and maintenance, wave energy conversion could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that, due to a lack of technical certainty, many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood,. In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based assessment to the emerging hydrokinetic technology sector in order to evaluate the potential impact of these technologies on the marine environment and navigation constraints. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios capture variations in technical approaches and deployment scales to properly identify and characterize environmental effects and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential range of technical attributes and potential effects of these emerging technologies and focus all stakeholders on the critical issues that need to be addressed. By identifying and addressing navigational and environmental concerns in the early stages of the industry’s development, serious mistakes that could potentially derail industry-wide development can be avoided. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory issues (Pacific Energy Ventures) and navigational issues (PCCI). The results of this study are structured into three reports: (1) Wave power scenario description (2) Tidal power scenario description (3) Framework for Identifying Key Environmental Concerns This is the first report in the sequence and describes the results of conceptual feasibility studies of wave power plants deployed in Humboldt County, California and Oahu, Hawaii. These two sites contain many of the same competing stakeholder interactions identified at other wave power sites in the U.S. and serve as representative case studies. Wave power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize potential effects, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informed the process of selecting representative wave power devices. The selection criteria requires that devices are at an advanced stage of development to reduce technical uncertainties, and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. Table 1 summarizes the selected wave power technologies. A number of other developers are also at an advanced stage of development, but are not directly mentioned here. Many environmental effects will largely scale with the size of the wave power plant. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nominally represent (1) a small pilot deployment, (2) a small commercial deployment, and (3) a large commercial sc

  3. AP1000{sup R} licensing and deployment in the United States

    SciTech Connect (OSTI)

    Jordan, R. P.; Russ, P. A.; Filiak, P. P.; Castiglione, L. L. [Westinghouse Electric Company LLC, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

    2012-07-01T23:59:59.000Z

    In recent years, both domestic and foreign utilities have turned to the standardized Westinghouse AP1000 plant design in satisfying their near - and long-term - sustainable energy needs. As direct support to these actions, licensing the AP1000 design has played a significant role by providing one of the fundamental bases in clearing regulatory hurdles leading to the start of new plant construction. Within the U.S. alone, Westinghouse AP1000 licensing activities have reached unprecedented milestones with the approvals of both AP1000 Design Certification and Southern Company's combined construction permit and operating license (COL) application directly supporting the construction of two new nuclear plants in Georgia. Further COL application approvals are immediately pending for an additional two AP1000 plants in South Carolina. And, across the U.S. nuclear industry spectrum, there are 10 other COL applications under regulatory review representing some 16 new plants at 10 sites. In total, these actions represent the first wave of new plant licensing under the regulatory approval process since 1978. Fundamental to the Nuclear Regulatory Commission's AP1000 Design Certification is the formal recognition of the AP1000 passive safety design through regulatory acceptance rulemaking. Through recognition and deployment of the AP1000 Design Certification, the utility licensee / operator of this reactor design are now offered an opportunity to use a simplified 'one-step' combined license process, thereby managing substantial back-end construction schedule risk from regulatory and intervention delays. Application of this regulatory philosophy represents both acceptance and encouragement of standardized reactor designs like the AP1000. With the recent AP1000 Design Certification and utility COL acceptances, the fundamental licensing processes of this philosophy have successfully proven the attainment of significant milestones with the next stage licensing actions directed towards deployment. AP1000 Design Certification and COL deployment, and management of the plant construction in accordance with the conditions within these approvals, remain as significant site and corporate responsibilities. These licensing-construction integrated activities must now focus on identifying and resolving 'as-built' departures from the standardized design as assessed against the certified AP1000 technical and licensing basis. Within this paper, significant aspects of the AP1000 U.S. licensing will be discussed, including identifying systems and processes used in ensuring compliance while deploying the standardized design. Critical licensing steps, licensing deployment actions as plant construction progresses and defining the road forward to a successful completion of licensing actions will be addressed. (authors)

  4. Clean coal technology deployment: From today into the next millennium

    SciTech Connect (OSTI)

    Papay, L.T.; Trocki, L.K.; McKinsey, R.R. [Bechtel Technology and Consulting, San Francisco, CA (United States)

    1997-12-31T23:59:59.000Z

    The Department of Energy`s clean coal technology (CCT) program succeeded in developing more efficient, cleaner, coal-fired electricity options. The Department and its private partners succeeded in the demonstration of CCT -- a major feat that required more than a decade of commitment between them. As with many large-scale capital developments and changes, the market can shift dramatically over the course of the development process. The CCT program was undertaken in an era of unstable oil and gas prices, concern over acid rain, and guaranteed markets for power suppliers. Regulations, fuel prices, emergency of competing technologies, and institutional factors are all affecting the outlook for CCT deployment. The authors identify the major barriers to CCT deployment and then introduce some possible means to surmount the barriers.

  5. Solar Photovoltaic Financing: Deployment by Federal Government Agencies

    SciTech Connect (OSTI)

    Cory, K.; Coggeshall, C.; Coughlin, J.; Kreycik, C.

    2009-07-01T23:59:59.000Z

    The goal of this report is to examine how federal agencies can finance on-site PV projects. It explains state-level cash incentives available, the importance of solar renewable energy certificate revenues (in certain markets), existing financing structures, as well as innovative financing structures being used by federal agencies to deploy on-site PV. Specific examples from the DOD, DOE, and other federal agencies are highlighted to explain federal project financing in detail.

  6. Cost and Performance Report Accelerated Site Technology Deployment Program

    SciTech Connect (OSTI)

    P. S. Morris

    2002-05-01T23:59:59.000Z

    The U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Operations Office (NNSA/NV) Environmental Restoration Division (ERD) Industrial Sites Project Deactivation and Decommissioning (D and D) source group has limited budget and is constantly searching for new technologies to reduce programmatic costs. Partnering with the DOE Office of Science and Technology Deactivation and Decommissioning Focus Area (DDFA) reduces NNSA/NV programmatic risk and encourages accelerated deployment of potentially beneficial technologies to the Nevada Test Site (NTS).

  7. Progress Towards Deployable Antineutrino Detectors for Reactor Safeguards

    SciTech Connect (OSTI)

    Bowden, N; Bernstein, A; Dazeley, S; Keefer, G; Reyna, D; Cabrera-Palmer, B; Kiff, S

    2010-04-05T23:59:59.000Z

    Fission reactors emit large numbers of antineutrinos and this flux may be useful for the measurement of two quantities of interest for reactor safeguards: the reactor's power and plutonium inventory throughout its cycle. The high antineutrino flux and relatively low background rates means that simple cubic meter scale detectors at tens of meters standoff can record hundreds or thousands of antineutrino events per day. Such antineutrino detectors would add online, quasi-real-time bulk material accountancy to the set of reactor monitoring tools available to the IAEA and other safeguards agencies with minimal impact on reactor operations. Between 2003 and 2008, our LLNL/SNL collaboration successfully deployed several prototype safeguards detectors at a commercial reactor in order to test both the method and the practicality of its implementation in the field. Partially on the strength of the results obtained from these deployments, an Experts Meeting was convened by the IAEA Novel Technologies Group in 2008 to assess current antineutrino detection technology and examine how it might be incorporated into the safeguards regime. Here we present a summary of our previous deployments and discuss current work that seeks to provide expanded capabilities suggested by the Experts Panel, in particular aboveground detector operation.

  8. Double Reed Day Double Reed Day Concert

    E-Print Network [OSTI]

    Sinnamon, Gordon J.

    , 4pm Sonata for Bassoon and Piano, Op. 168 Camille Saint-Saens Allegro moderato Allegro scherzando Molto adagio; Allegro moderato Alexandre von Wartburg, bassoon Eliza Lam von Wartburg, piano Elegy (for

  9. Energy Dept. Reports: U.S. Fuel Cell Market Production and Deployment...

    Office of Environmental Management (EM)

    Energy Dept. Reports: U.S. Fuel Cell Market Production and Deployment Continues Strong Growth Energy Dept. Reports: U.S. Fuel Cell Market Production and Deployment Continues Strong...

  10. A Roadmap to Deploy New Nuclear Power Plants in the United States...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Roadmap to Deploy New Nuclear Power Plants in the United States by 2010: Volume II, Main Report A Roadmap to Deploy New Nuclear Power Plants in the United States by 2010: Volume...

  11. Rice University WARPnet: A Platform for Clean-Slate Deployed Wireless

    E-Print Network [OSTI]

    Rice University WARPnet: A Platform for Clean-Slate Deployed Wireless Networks by Siddharth Gupta: A Platform for Clean-Slate Deployed Wireless Networks by Siddharth Gupta There has been a recent paradigm

  12. U.S. Fuel Cell Market Production and Deployment Continues Strong...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Fuel Cell Market Production and Deployment Continues Strong Growth U.S. Fuel Cell Market Production and Deployment Continues Strong Growth January 8, 2014 - 12:00am Addthis...

  13. Commercialization and Deployment at NREL: Advancing Renewable Energy and Energy Efficiency at Speed and Scale

    SciTech Connect (OSTI)

    Not Available

    2011-05-11T23:59:59.000Z

    A White Paper overview of NREL's commercialization and deployment activities, requested by the chair of the State Energy Advisory Board.

  14. DOE Building Energy Asset Score: Overview and Deployment Webinar-- Text Version

    Broader source: Energy.gov [DOE]

    Below is the text version of the webinar DOE Building Energy Asset Score: Overview and Deployment, presented in March 2015.

  15. A Small Secure Transportable Autonomous Lead-Cooled Fast Reactor for Deployment at Remote Sites

    SciTech Connect (OSTI)

    Sienicki, J .J.; Smith, M.A.; Mosseytsev, A.V.; Yang, W.S.; Wade, D.C.

    2004-10-06T23:59:59.000Z

    This presentation discusses a small secure transportable autonomous lead-cooled fast reactor for deployment at remote sites.

  16. Rigid Deployable Solar Array A.M. Watt and S. Pellegrino

    E-Print Network [OSTI]

    Pellegrino, Sergio

    with the design of low-cost rigid-panel deployable solar arrays with self- locking tape-spring hinges. The reportRigid Deployable Solar Array A.M. Watt and S. Pellegrino CUED/D-STRUCT/TR214 Department on the deployment of a solar array wing are evaluated experimentally. #12;#12;Contents 1 Introduction 1 1.1 Layout

  17. Random vs. Deterministic Deployment of Sensors in the Presence of Failures and Placement Errors

    E-Print Network [OSTI]

    Kumar, Santosh

    Random vs. Deterministic Deployment of Sensors in the Presence of Failures and Placement Errors, and evaluation of various algorithms (e.g., sleep-wakeup), it has often been considered too expensive as compared to optimal deterministic deployment patterns when deploying sensors in real-life. Roughly speaking, a factor

  18. Conductance of a Molecular Junction M. A. Reed,* C. Zhou, C. J. Muller, T. P. Burgin,

    E-Print Network [OSTI]

    Zhou, Chongwu

    ­9), with the potential bar- riers of the semiconductor system being re- placed by any existing contact barrier the displacement of thi- ols has been shown (10) and the formation of a disulfide bridge would require oxygen (21

  19. SHARING AND DEPLOYING INNOVATIVE INFORMATION TECHNOLOGY SOLUTIONS TO MANAGE WASTE ACROSS THE DOE COMPLEX

    SciTech Connect (OSTI)

    Crolley, R.; Thompson, M.

    2011-01-31T23:59:59.000Z

    There has been a need for a faster and cheaper deployment model for information technology (IT) solutions to address waste management needs at US Department of Energy (DOE) complex sites for years. Budget constraints, challenges in deploying new technologies, frequent travel, and increased job demands for existing employees have prevented IT organizations from staying abreast of new technologies or deploying them quickly. Despite such challenges, IT organizations have added significant value to waste management handling through better worker safety, tracking, characterization, and disposition at DOE complex sites. Systems developed for site-specific missions have broad applicability to waste management challenges and in many cases have been expanded to meet other waste missions. Radio frequency identification (RFID) and global positioning satellite (GPS)-enabled solutions have reduced the risk of radiation exposure and safety risks. New web-based and mobile applications have enabled precision characterization and control of nuclear materials. These solutions have also improved operational efficiencies and shortened schedules, reduced cost, and improved regulatory compliance. Collaboration between US Department of Energy (DOE) complex sites is improving time to delivery and cost efficiencies for waste management missions with new information technologies (IT) such as wireless computing, global positioning satellite (GPS), and radio frequency identification (RFID). Integrated solutions developed at separate DOE complex sites by new technology Centers of Excellence (CoE) have increased material control and accountability, worker safety, and environmental sustainability. CoEs offer other DOE sister sites significant cost and time savings by leveraging their technology expertise in project scoping, implementation, and ongoing operations.

  20. f " International Conference on Wetland Systems for Water Pollution Control. Vienna 1996 XIII/4 -1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    96/0852 f í " International Conference on Wetland Systems for Water Pollution Control. Vienna 1996 XIII/4 - 1 TREATMENT OF SLUDGE FROM SEPTIC TANKS IN A REED-BED FILTERS PILOT PLANT. Alain Liénard and treatment of wastewater. Zones of collective and individual (on-site) treatment have to be defined. Local

  1. Report SYCON91-10 SHORTEST PATHS FOR THE REEDS-SHEPP CAR

    E-Print Network [OSTI]

    Sussmann, Hector

    @hilbert.rutgers.edu ABSTRACT We illustrate the use of the techniques of modern geometric optimal control theory by studying - Rutgers Center for Systems and Control, September 1991 1 Most of the results and techniques of this paper, but to exhibit the power of the tools of modern optimal control theory, and to argue that this power

  2. Status of the U.S. Market for Green Power Glenn Reed, XENERGYInc.

    E-Print Network [OSTI]

    generated in whole or in part from renewable resources. Green power satisfies both the environmental relative to creating barriers and incentives for the development and sale of green power. While multiple to Commonwealth Energy's system powerproduct. Deregulation of the Utility Industry and Role of Energy Services

  3. Sludge drying reed beds for septage treatment: towards design and operation recommendations

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    : the future of the septage. The aim of this paper is to assess the feasibility of septage treatment by SDRB). Nowadays, septic tank facilities have a widespread distribution, providing a first treatment to household effluent consisting of a solid/liquid separation. Operation efficiency of these systems is subject

  4. Optimal Deployment of Thermal Energy Storage under Diverse Economic and Climate Conditions

    SciTech Connect (OSTI)

    DeForest, Nicolas; Mendes, Goncalo; Stadler, Michael; Feng, Wei; Lai, Judy; Marnay, Chris

    2014-04-15T23:59:59.000Z

    This paper presents an investigation of the economic benefit of thermal energy storage (TES) for cooling, across a range of economic and climate conditions. Chilled water TES systems are simulated for a large office building in four distinct locations, Miami in the U.S.; Lisbon, Portugal; Shanghai, China; and Mumbai, India. Optimal system size and operating schedules are determined using the optimization model DER-CAM, such that total cost, including electricity and amortized capital costs are minimized. The economic impacts of each optimized TES system is then compared to systems sized using a simple heuristic method, which bases system size as fraction (50percent and 100percent) of total on-peak summer cooling loads. Results indicate that TES systems of all sizes can be effective in reducing annual electricity costs (5percent-15percent) and peak electricity consumption (13percent-33percent). The investigation also indentifies a number of criteria which drive TES investment, including low capital costs, electricity tariffs with high power demand charges and prolonged cooling seasons. In locations where these drivers clearly exist, the heuristically sized systems capture much of the value of optimally sized systems; between 60percent and 100percent in terms of net present value. However, in instances where these drivers are less pronounced, the heuristic tends to oversize systems, and optimization becomes crucial to ensure economically beneficial deployment of TES, increasing the net present value of heuristically sized systems by as much as 10 times in some instances.

  5. Pascua Yaqui Tribe Renewable Energy Development and Deployment Feasibility Study

    SciTech Connect (OSTI)

    Arvayo, Maria

    2014-05-30T23:59:59.000Z

    In 2012, PYT was awarded a grant from the Department of Energy Tribal Energy Program to conduct a Renewable Energy Development and Deployment Feasibility Study that would define the technical and economic viability of renewable energy on tribal lands. Red Mountain Energy Partners (RMEP) was hired by PYT to complete the study. Through this study, Red Mountain concluded that there are viable opportunities for solar at Tortuga Ranch, the Casino del Sol and a third site near the Justice Center on Camino de Oeste.

  6. Bio-Oil Deployment in the Home Heating Market

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyand SustainedBio-Oil Deployment in the Home Heating

  7. SRNL Deploys Innovative Radiation Mapping Device | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy atLLC - FE DKT. 10-160-LNG - ORDER 2913|| DepartmentPro FormaSRNL Deploys

  8. PNNL Technology Planning and Deployment Group | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLuOpenNorthOlympia GreenThesourceOvertonPEPCOPERIPNNL)Deployment

  9. Deployment of a New Shortwave Spectroradiometer (SWS) at the SGP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration wouldDECOMPOSITIONPortalTo helpUniversitiesofDepartmentalDeployment of a

  10. Interim Status of the Accelerated Site Technology Deployment Integrated Decontamination and Decommissioning Project

    SciTech Connect (OSTI)

    A. M Smith; G. E. Matthern; R. H. Meservey

    1998-11-01T23:59:59.000Z

    The Idaho National Engineering and Environmental Laboratory (INEEL), Fernald Environmental Management Project (FEMP), and Argonne National Laboratory - East (ANL-E) teamed to establish the Accelerated Site Technology Deployment (ASTD) Integrated Decontamination and Decommissioning (ID&D) project to increase the use of improved technologies in D&D operations. The project is making the technologies more readily available, providing training, putting the technologies to use, and spreading information about improved performance. The improved technologies are expected to reduce cost, schedule, radiation exposure, or waste volume over currently used baseline methods. They include some of the most successful technologies proven in the large-scale demonstrations and in private industry. The selected technologies are the Pipe Explorer, the GammaCam, the Decontamination Decommissioning and Remediation Optimal Planning System (DDROPS), the BROKK Demolition Robot, the Personal Ice Cooling System (PICS), the Oxy-Gasoline Torch, the Track-Mounted Shear, and the Hand-Held Shear.

  11. Environmental Mitigation Technology (Innovative System Testing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology (Innovative System Testing)-Deployment and Testing of the Alden Hydropower Fish-Friendly Turbine Environmental Mitigation Technology (Innovative System...

  12. INTERNATIONAL ENVIRONMENTAL TECHNOLOGY IDENTIFICATION, DEVELOPMENT, DEMONSTRATION, DEPLOYMENT AND EXCHANGE

    SciTech Connect (OSTI)

    Roy C. Herndon

    2001-02-28T23:59:59.000Z

    Cooperative Agreement (DE-FC21-95EW55101) between the U.S. Department of Energy (DOE) and the Florida State University's Institute for International Cooperative Environmental Research (IICER) was designed to facilitate a number of joint programmatic goals of both the DOE and the IICER related to international technology identification, development, demonstration and deployment using a variety of mechanisms to accomplish these goals. These mechanisms included: laboratory and field research; technology demonstrations; international training and technical exchanges; data collection, synthesis and evaluation; the conduct of conferences, symposia and high-level meetings; and other appropriate and effective approaches. The DOE utilized the expertise and facilities of the IICER at Florida State University to accomplish its goals related to this cooperative agreement. The IICER has unique and demonstrated capabilities that have been utilized to conduct the tasks for this cooperative agreement. The IICER conducted activities related to technology identification, development, evaluation, demonstration and deployment through its joint centers which link the capabilities at Florida State University with collaborating academic and leading research institutions in the major countries of Central and Eastern Europe (e.g., Czech Republic, Hungary, Poland) and Russia. The activities and accomplishments for this five-year cooperative agreement are summarized in this Final Technical Report.

  13. Economics of ALMR deployment in the United States

    SciTech Connect (OSTI)

    Delene, J.G.; Fuller, L.C.; Hudson, C.R.

    1995-02-01T23:59:59.000Z

    The Advanced Liquid Metal Reactor (ALMR) has the potential to extend the economic life of the nuclear option and of reducing the number of high-level waste repositories which will eventually be needed in an expanding nuclear economy. This paper reports on an analysis which models and evaluates the economics of the use of ALMRs as a component of this country`s future electricity generation mix. The ALMR concept has the ability to utilize as fuel the fissile material contained in previously irradiated nuclear fuel (i.e., spent fuel) or from surplus weapons-grade material. While not a requirement for the successful deployment of ALMR power plant technology, the reprocessing of spent fuel from light water reactors (LWR) is necessary for any rapid introduction of ALMR power plants. In addition, the reprocessing of LWR spent fuel may reduce the number of high-level waste repositories needed in the future by burning the long-lived actinides produced in the fission process. With this study, the relative economics of a number of potential scenarios related to these issues are evaluated. While not encompassing the full range of all possibilities, the cases reported here provide an indication of the potential costs, timings, and relative economic attractiveness of ALMR deployment.

  14. Information Technology and Clinical Systems

    E-Print Network [OSTI]

    Derisi, Joseph

    Operations Manager: TBD Systems, Storage, DBA · Network & Voice · Production Control · Data Center, Incident, Request Management · Process design and deployment · Business Continuity and DR planning

  15. Review Meeting Mudrock Systems Research Laboratory

    E-Print Network [OSTI]

    Texas at Austin, University of

    @mail.utexas.edu). March 6 Tuesday NOTE: Tuesday and Wednesday meeting presentations will be held in the The L'il Texas:10 ­ 9:40 AM Devonian mudrock pore systems: Bakken, Woodford, New Albany; Reed 9:40 ­ 10:10 AM for Del Rio FIELD TRIP: DEL RIO, TEXAS March 8 Thursday 8:00 AM ­ 6:00 PM: Examine Upper Cretaceous Del

  16. ``White Land``...new Russian closed-cycle nuclear technology for global deployment

    SciTech Connect (OSTI)

    Bowman, C.D.

    1996-07-01T23:59:59.000Z

    A Russian technology called ``White Land`` is being pursued which is based on their heavy-metal-cooled fast spectrum reactor technology developed to power their super-fast Alpha Class submarines. These reactors have important safety advantages over the more conventional sodium-cooled fast breeder reactors but preserve some of the attractive operational features of the fast spectrum systems. Perhaps chief among these advantages in the current political milieu is their ability to generate energy from any nuclide heavier than thorium including HEU, weapons plutonium, commercial plutonium, neptunium, americium, and curium. While there are several scenarios for deployment of these systems, the most attractive perhaps is containment in submarine-like enclosures to be placed underwater near a coastal population center. A Russian organization named the Alphabet Company would build the reactors and maintain title to them. The company would be paid on the basis of kilowatt-hours delivered. The reactors would not require refueling for 10--15 years and no maintenance violating the radiation containment would be required or would be carried out at the deployment site. The host country need not develop any nuclear technology or accept any nuclear waste. When the fuel load has been burned, the entire unit would be towed to Archangel, Russia for refueling. The fission product would be removed from the fuel by ``dry`` molten salt technology to minimize the waste stream and the fissile material would be returned to the reactor for further burning. The fission product waste would be stored at New Land Island, their current nuclear test site in the Arctic. If concerns over fission product justify it, the long-lived species will be transmuted in an accelerator-driven system. Apparently this project is backed at the highest levels of MINATOM and the Alphabet Company has the funding to proceed.

  17. Role of small lead-cooled fast reactors for international deployment in worldwide sustainable nuclear energy supply.

    SciTech Connect (OSTI)

    Sienicki, J. J.; Wade, D. C.; Moisseytsev, A.; Nuclear Engineering Division

    2008-01-01T23:59:59.000Z

    Most recently, the global nuclear energy partnership (GNEP) has identified, as one of its key objectives, the development and demonstration of concepts for small and medium-sized reactors (SMRs) that can be globally deployed while assuring a high level of proliferation resistance. Lead-cooled systems offer several key advantages in meeting these goals. The small lead-cooled fast reactor concept known as the small secure transportable autonomous reactor (SSTAR) has been under ongoing development as part of the US advanced nuclear energy systems programs. Meeting future worldwide projected energy demands during this century (e.g., 1000 to 2000 GWe by 2050) in a sustainable manner while maintaining CO2 emissions at or below today's level will require massive deployments of nuclear reactors in non-fuel cycle states as well as fuel cycle states. The projected energy demands of non-fuel cycle states will not be met solely through the deployment of Light Water Reactors (LWRs) in those states without using up the world's resources of fissile material (e.g., known plus speculative virgin uranium resources = 15 million tonnes). The present U.S. policy is focused upon domestic deployment of large-scale LWRs and sodium-cooled fast spectrum Advanced Burner Reactors (ABRs) working in a symbiotic relationship that burns existing fissile material while destroying the actinides which are generated. Other major nuclear nations are carrying out the development and deployment of SFR breeders as witness the planning for SFR breeder deployments in France, Japan, China, India, and Russia. Small (less that 300 MWe) and medium (300 to 700 MWe) size reactors are better suited to the growing economies and infrastructures of many non-fuel cycle states and developing nations. For those deployments, fast reactor converters which are fissile self-sufficient by creating as much fissile material as they consume are preferred to breeders that create more fissile material than they consume. Thus, there is a need for small and medium size fast reactors in non-fuel cycle states operating in a converter mode as well as large sodium-cooled fast breeders in fuel cycle states. Desired attributes for exportable small fast reactors include: proliferation resistance features such as restricted access to fuel; long core life further restricting access by reducing or eliminating the need for refueling; restricted potential to be misused in a breeding mode; fuel form that is unattractive in the safeguards sense; and a conversion ratio of unity to self-generate as much fissile material as is consumed. Desired attributes for exportable small reactor deployments in developing nations and remote sites also include: a small power level to match the smaller demand of towns or sites that are off-grid or on immature local grids; low enough cost to be economically competitive with alternative energy sources available to developing nation customers (e.g. diesel generators in remote locations); readily transported and assembled from transportable modules; simple to operate and highly reliable reducing plant operating staff requirements; as well as high reliability and passive safety reducing the number of accident initiators and need for safety systems as well as reducing the size of the exclusion and emergency planning zones. The Lead-Cooled Fast Reactor (LFR) has the desired attributes. An example of a small exportable LFR concept is the 20 MWe (45 MWt) Small Secure Transportable Autonomous Reactor (SSTAR) incorporating proliferation resistance, fissile selfsufficiency, autonomous load following, a high degree of passive safety, and supercritical carbon dioxide Brayton cycle energy conversion for high plant efficiency and improved economic competitiveness.

  18. The ATLAS EventIndex: architecture, design choices, deployment and first operation experience

    E-Print Network [OSTI]

    Barberis, Dario; The ATLAS collaboration; Cranshaw, Jack; Favareto, Andrea; Fernandez Casani, Alvaro; Gallas, Elizabeth; Glasman, Claudia; Gonzalez de la Hoz, Santiago; Hrivnac, Julius; Malon, David; Prokoshin, Fedor; Salt, José; Sánchez, Javier; Toebbicke, Rainer; Yuan, Ruijun

    2015-01-01T23:59:59.000Z

    The EventIndex is the complete catalogue of all ATLAS events, keeping the references to all files that contain a given event in any processing stage. It replaces the TAG database, which had been in use during LHC Run 1. For each event it contains its identifiers, the trigger pattern and the GUIDs of the files containing it. Major use cases are event picking, feeding the Event Service used on some production sites, and technical checks of the completion and consistency of processing campaigns. The system design is highly modular so that its components (data collection system, storage system based on Hadoop, query web service and interfaces to other ATLAS systems) could be developed separately and in parallel during LS1. The EventIndex is in operation for the start of LHC Run 2. This paper describes the high-level system architecture, the technical design choices and the deployment process and issues. The performance of the data collection and storage systems, as well as the query services, are also reported.

  19. The ATLAS EventIndex: architecture, design choices, deployment and first operation experience

    E-Print Network [OSTI]

    Barberis, Dario; The ATLAS collaboration; Cranshaw, Jack; Favareto, Andrea; Fernandez Casani, Alvaro; Gallas, Elizabeth; Glasman, Claudia; Gonzalez de la Hoz, Santiago; Hrivnac, Julius; Malon, David; Prokoshin, Fedor; Salt, José; Sánchez, Javier; Rainer Toebbicke; Yuan, Ruijun

    2015-01-01T23:59:59.000Z

    The EventIndex is the complete catalogue of all ATLAS events, keeping the references to all files that contain a given event in any processing stage. It replaces the TAG database, which had been in use during LHC Run 1. For each event it contains its identifiers, the trigger pattern and the GUIDs of the files containing it. Major use cases are event picking, feeding the Event Service used on some production sites, and technical checks of the completion and consistency of processing campaigns. The system design is highly modular so that its components (data collection system, storage system based on Hadoop, query web service and interfaces to other ATLAS systems) could be developed separately and in parallel during LS1. The EventIndex is in operation for the start of LHC Run 2. This talk describes the high level system architecture, the technical design choices and the deployment process and issues. The performance of the data collection and storage systems, as well as the query services, will be reported.

  20. Domain-Specific Languages For Developing and Deploying Signature Discovery Workflows

    SciTech Connect (OSTI)

    Jacob, Ferosh; Wynne, Adam S.; Liu, Yan; Gray, Jeff

    2013-12-02T23:59:59.000Z

    Domain-agnostic Signature Discovery entails scientific investigation across multiple domains through the re-use of existing algorithms into workflows. The existing algorithms may be written in any programming language for various hardware architectures (e.g., desktops, commodity clusters, and specialized parallel hardware platforms). This raises an engineering issue in generating Web services for heterogeneous algorithms so that they can be composed into a scientific workflow environment (e.g., Taverna). In this paper, we present our software tool that defines two simple Domain-Specific Languages (DSLs) to automate these processes: SDL and WDL. Our Service Description Language (SDL) describes key elements of a signature discovery algorithm and generates the service code. The Workflow Description Language (WDL) describes the pipeline of services and generates deployable artifacts for the Taverna workflow management system. We demonstrate our tool with a landscape classification example that is represented by BLAST workflows composed of services that wrap original scripts.

  1. An object-oriented approach to deploying highly configurable Web interfaces for the ATLAS experiment

    E-Print Network [OSTI]

    Lange Ramos, Bruno; The ATLAS collaboration; Pommes, Kathy; Pavani Neto, Varlen; Vieira Arosa, Breno; Abreu Da Silva, Igor

    2015-01-01T23:59:59.000Z

    The ATLAS Technical Coordination disposes of 17 Web systems to support its operation. These applications, whilst ranging from supporting the process of publishing scientific papers to monitoring radiation levels in the equipment at the cave, are constantly prone to changes in requirements due to the collaborative nature of the experiment and its management. In this context, a Web framework is proposed to unify the generation of the supporting interfaces. Fence assembles classes to build applications by making extensive use of JSON configuration files. It relies vastly on Glance, a technology that was set forth in 2003 to create an abstraction layer on top of the heterogeneous sources that store the technical coordination data. Once Glance maps out the database modeling, records can be referenced in the configuration files by wrapping unique identifiers around double enclosing brackets. The deployed content can be individually secured by attaching clearance attributes to their description thus ensuring that vi...

  2. Instrumentation Report No. 3: performance and reliability of instrumentation deployed for the Spent Fuel Test - Climax

    SciTech Connect (OSTI)

    Patrick, W.C.; Rector, N.L.; Scarafiotti, J.J.

    1984-12-01T23:59:59.000Z

    A demonstration of the short-term storage and subsequent retrieval of spent nuclear fuel assemblies was successfully completed at the US Department of Energy`s Nevada Test Site. Nearly 1000 instruments were deployed to monitor the temperature of rock, air, and metallic components of the test; displacements and stress changes within the rock mass; radiation dosage to personnel and to the rock; thermal energy input; characteristics of the ventilation airstream; and the operational status of the test. Careful selection, installation, calibration, and maintenance of these instruments ensured the acquisition of about 15.3 x 10{sup 6} high-quality data points. With few exceptions, the performance and reliability of the instrumentation and associated data acquisition system (DAS) were within specified acceptable limits. Details of the performance and reliability of the instrumentation are discussed in this report. 42 figs., 32 tabs.

  3. Global Deployment of Geothermal Energy Using a New Characterization in GCAM 1.0

    SciTech Connect (OSTI)

    Hannam, Phil; Kyle, G. Page; Smith, Steven J.

    2009-09-01T23:59:59.000Z

    This report documents modeling of geothermal energy in GCAM 1.0 (formerly MiniCAM) from FY2008 to FY2009, from the inputs to the U.S. Climate Change Technology Program report (Clarke et al., 2008a) to the present representation, which will be used in future work. To demonstrate the newest representation, we describe the procedure and outcome of six model runs that illustrate the potential role of geothermal energy in the U.S. and global regions through different futures climate policy, development and deployment of engineered, or enhanced, geothermal systems (EGS), and availability of other low-cost, low-carbon electricity generation technologies such as nuclear energy and carbon capture and storage (CCS).

  4. Field Deployment of Prototype Antenna Tiles for the Mileura Widefield Array--Low Frequency Demonstrator

    E-Print Network [OSTI]

    Judd D. Bowman; David G. Barnes; Frank H. Briggs; Brian E. Corey; Merv J. Lynch; N. D. Ramesh Bhat; Roger J. Cappallo; Sheperd S. Doeleman; Brian J. Fanous; David Herne; Jacqueline N. Hewitt; Chris Johnston; Justin C. Kasper; Jonathon Kocz; Eric Kratzenberg; Colin J. Lonsdale; Miguel F. Morales; Divya Oberoi; Joseph E. Salah; Bruce Stansby; Jamie Stevens; Glen Torr; Randall Wayth; Rachel L. Webster; J. Stuart B. Wyithe

    2006-12-01T23:59:59.000Z

    Experiments were performed with prototype antenna tiles for the Mileura Widefield Array--Low Frequency Demonstrator (MWA-LFD) to better understand the widefield, wideband properties of their design and to characterize the radio frequency interference (RFI) between 80 and 300 MHz at the site in Western Australia. Observations acquired during the six month deployment confirmed the predicted sensitivity of the antennas, sky-noise dominated system temperatures, and phase-coherent interferometric measurements. The radio spectrum is remarkably free of strong terrestrial signals, with the exception of two narrow frequency bands allocated to satellite downlinks and rare bursts due to ground-based transmissions being scattered from aircraft and meteor trails. Results indicate the potential of the MWA-LFD to make significant achievements in its three key science objectives: epoch of reionziation science, heliospheric science, and radio transient detection.

  5. Integrated Deployment Model: A Comprehensive Approach to Transforming the Energy Economy

    SciTech Connect (OSTI)

    Werner, M.

    2010-11-01T23:59:59.000Z

    This paper describes the Integrated Deployment model to accelerate market adoption of alternative energy solutions to power homes, businesses, and vehicles through a comprehensive and aggressive approach.

  6. DOE Fuel Cell Technologies Office Record 14010: Industry Deployed Fuel Cell Powered Lift Trucks

    Broader source: Energy.gov [DOE]

    This program record from the U.S. Department of Energy's Fuel Cell Technologies Office provides information about fuel cell powered lift trucks deployed by industry.

  7. DOE Fuel Cell Technologies Office Record 14009: Industry Deployed Fuel Cell Backup Power (BuP)

    Broader source: Energy.gov [DOE]

    This program record from the U.S. Department of Energy's Fuel Cell Technologies Office provides information about fuel cell backup power deployed by industry.

  8. Community Renewable Energy Deployment Provides Replicable Examples of Clean Energy Projects

    Office of Energy Efficiency and Renewable Energy (EERE)

    Describes the DOE Community Renewable Energy Deployment program, which used funding from the American Recovery and Reinvestment Act of 2009 to promote investment in clean energy solutions and...

  9. President Obama Announces Commitments and Executive Actions to Advance Solar Deployment

    Broader source: Energy.gov [DOE]

    Today, President Obama announced more than 300 private and public sector commitments to create jobs and cut carbon pollution by advancing solar deployment and energy efficiency. The commitments...

  10. SunShot Catalyst Innovators Take on Software Challenges to Deploy...

    Open Energy Info (EERE)

    SunShot Catalyst Innovators Take on Software Challenges to Deploy Solar Technology Across America Home > Groups > OpenEI Community Central Dc's picture Submitted by Dc(266)...

  11. Deployment Barriers to Distributed Wind Energy: Workshop Report -- October 28, 2010

    SciTech Connect (OSTI)

    Not Available

    2011-07-01T23:59:59.000Z

    This report presents key findings from the Department of Energy's Deployment Barriers to Distributed Wind Technology Workshop, held October 28, 2010 in Denver, Colorado.

  12. AMO Industrial Distributed Energy: Immediate Deployment of Waste Energy Technologies at Multiple Sites

    Broader source: Energy.gov [DOE]

    Fact sheet overviewing Verso Paper Corp. project that will deploy industrial technologies to recover and reuse water and steam at pulp and paper facilities.

  13. Robert M. Reed Publications

    E-Print Network [OSTI]

    Yang, Zong-Liang

    characterization based on microfracture surrogates, Pottsville Sandstone, Black Warrior Basin, Alabama: Gulf Coast Negra black quartzites--Tomar Cordoba Shear Zone, E. Portugal: mineralogy and cathodoluminescence Basin: m

  14. 109J.D. Westervelt and G.L. Cohen (eds.), Ecologist-Developed Spatially Explicit Dynamic Landscape Models, Modeling Dynamic Systems,

    E-Print Network [OSTI]

    Georgia, University of

    Models, Modeling Dynamic Systems, DOI 10.1007/978-1-4614-1257-1_7, © Springer Science+Business Media, LLC, these targets should represent the most efficient use of limited resources, especially given that resource managers need to balance multiple, often complex issues (Reed et al. 2009). Population models can often aid

  15. Non-Economic Obstacles to Wind Deployment: Issues and Regional Differences (Presentation)

    SciTech Connect (OSTI)

    Baring-Gould, I.

    2014-05-01T23:59:59.000Z

    This presentation provides an overview of national obstacles to wind deployment, with regional assessments. A special mention of offshore projects and distributed wind projects is provided. Detailed maps examine baseline capacity, military and flight radar, golden and bald eagle habitat, bat habitat, whooping crane habitat, and public lands. Regional deployment challenges are also discussed.

  16. Structuring Measurements for Modeling and the Deployment of Industrial Wireless Networks

    E-Print Network [OSTI]

    Zilic, Zeljko

    . Replacing wired units with wireless sensor network (WSN) nodes offers more flexibility, and ultimately coverage during its deployment. Wireless networking devices are inherently power-limited, which limits1 Structuring Measurements for Modeling and the Deployment of Industrial Wireless Networks Rong

  17. Harvesting Clean Energy How California Can Deploy Large-Scale Renewable

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Harvesting Clean Energy How California Can Deploy Large-Scale Renewable Energy Projects Harvesting Clean Energy: How California Can Deploy Large-Scale Renewable Energy Projects on Appropriate acres of impaired lands in the Westlands Water District in the Central Valley may soon have

  18. Outage Detection in Power Distribution Networks with Optimally-Deployed Power Flow Sensors

    E-Print Network [OSTI]

    Zhao, Yue

    Outage Detection in Power Distribution Networks with Optimally-Deployed Power Flow Sensors Yue Zhao deployed real-time power flow sensors and that of load estimates via Advanced Metering Infrastructure (AMI of Naval Research, under Grant N00014-12-1-0767. where supervisory control and data acquisition (SCADA

  19. Deployment Mechanism Design with Behavioral Modeling Based on Pro/Engineer Motion Skeleton

    E-Print Network [OSTI]

    kind of motion mechanisms, is often used to stretch out solar panels or antennas in spacecraftDeployment Mechanism Design with Behavioral Modeling Based on Pro/Engineer Motion Skeleton Chao.com.cn Keywords: Deployment mechanism, Motion skeleton, Behavioral modeling, Feasibility analysis Abstract

  20. The deployment of urban logistics solutions from research, development and pilot results

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    The deployment of urban logistics solutions from research, development and pilot results Lessons logistics solutions is one of the main pending questions in the field of urban goods transport research demonstration project, this paper presents the main issues related to the deployment of urban logistics

  1. Evaluating the Potential for Large-Scale Biodiesel Deployments in a Global Context

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Evaluating the Potential for Large-Scale Biodiesel Deployments in a Global Context by Matthew Johnston. All rights reserved. #12;#12;Evaluating the Potential for Large-Scale Biodiesel Deployments on the subject of biodiesel, but I can only hope she takes comfort knowing now much I appreciate everything she

  2. Deployment Scenario of Heavy Water Cooled Thorium Breeder Reactor

    SciTech Connect (OSTI)

    Mardiansah, Deby; Takaki, Naoyuki [Course of Applied Science, School of Engineering, Tokai University (Japan)

    2010-06-22T23:59:59.000Z

    Deployment scenario of heavy water cooled thorium breeder reactor has been studied. We have assumed to use plutonium and thorium oxide fuel in water cooled reactor to produce {sup 233}U which will be used in thorium breeder reactor. The objective is to analysis the potential of water cooled Th-Pu reactor for replacing all of current LWRs especially in Japan. In this paper, the standard Pressurize Water Reactor (PWR) has been designed to produce 3423 MWt; (i) Th-Pu PWR, (ii) Th-Pu HWR (MFR = 1.0) and (iii) Th-Pu HWR (MFR 1.2). The properties and performance of the core were investigated by using cell and core calculation code. Th-Pu PWR or HWR produces {sup 233}U to introduce thorium breeder reactor. The result showed that to replace all (60 GWe) LWR by thorium breeder reactor within a period of one century, Th-Pu oxide fueled PWR has insufficient capability to produce necessary amount of {sup 233}U and Th-Pu oxide fueled HWR has almost enough potential to produce {sup 233}U but shows positive void reactivity coefficient.

  3. A feasibility study for a manufacturing technology deployment center

    SciTech Connect (OSTI)

    Not Available

    1994-10-31T23:59:59.000Z

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  4. Supercomputers model and simulate complex, dynamic systems

    Broader source: Energy.gov (indexed) [DOE]

    Laboratory System has built and deployed some of the most significant high-performance computing (HPC) resources available anywhere, including 32 of the 500 fastest...

  5. The ADVANCE project: Formal evaluation of the targeted deployment. Volume 1

    SciTech Connect (OSTI)

    NONE

    1997-01-01T23:59:59.000Z

    The Advanced Driver and Vehicle Advisory Navigation ConcEpt (ADVANCE) was an invehicle advanced traveler information system (ATIS) that operated in the northwest suburbs of Chicago, Illinois. It was designed to provide origin-destination shortest-time route guidance to a vehicle based on (a) an on-board static (fixed) data base of average network link travel times by time of day, combined as available and appropriate with (b) dynamic (real-time) information on traffic conditions provided by radio frequency (RF) communications to and from a traffic information center (TIC). Originally conceived in 1990 as a major project that would have installed 3,000 to 5,000 route guidance units in privately owned vehicles throughout the test area, ADVANCE was restructured in 1995 as a {open_quotes}targeted deployment,{close_quotes} in which approximately 80 vehicles were to be equipped with the guidance units - Mobile Navigation Assistants (MNAs) - to be in full communication with the TIC while driving the ADVANCE test area road system. Volume one consists of the evaluation managers overview report, and several appendices containing test results.

  6. Accelerated deployment of nanostructured hydrotreating catalysts. Final CRADA Report.

    SciTech Connect (OSTI)

    Libera, J.A.; Snyder, S.W.; Mane, A.; Elam, J.W.; Cronauer, D.C.; Muntean, J.A.; Wu, T.; Miller, J.T. (Chemical Sciences and Engineering Division); ( ES)

    2012-08-27T23:59:59.000Z

    Nanomanufacturing offers an opportunity to create domestic jobs and facilitate economic growth. In response to this need, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy issued a Research Call to develop nanomanufacturing capabilities at the National Laboratories. High performance catalysts represent a unique opportunity to deploy nanomanufacturing technologies. Re-refining of used lube oil offers an opportunity to create manufacturing jobs and decrease dependence on imported petroleum. Improved catalysts are required to produce a better quality product, decrease environmental impact, extend catalyst life, and improve overall economics of lube oil re-refining. Argonne National Laboratory (Argonne) in cooperation with Universal Lubricants, Inc. (ULI) and Chemical Engineering Partners (CEP) have carried out a Cooperative Research and Development Agreement (CRADA) to prepare nanostructured hydrotreating catalysts using atomic layer deposition (ALD) to exhibit superior performance for the re-refining of used lube oil. We investigated the upgrading of recycled lube oil by hydrogenation using commercial, synthetically-modified commercial catalysts, and synthesized catalysts. A down-flow (trickle bed) catalytic unit was used for the hydrogenation experiments. In addition to carrying out elemental analyses of the various feed and product fractions, characterization was undertaken using H{sup 1} and C{sup 13} NMR. Initially commercial were evaluated. Second these commercial catalysts were promoted with precious metals using atomic layer deposition (ALD). Performance improvements were observed that declined with catalyst aging. An alternate approach was undertaken to deeply upgrade ULI product oils. Using a synthesized catalyst, much lower hydrogenation temperatures were required than commercial catalysts. Other performance improvements were also observed. The resulting lube oil fractions were of high purity even at low reaction severity. The products recovered from both the ALD and other processes were water-white (even those from the low temperature, low residence time (high space velocity), low conversion runs). These results indicate that highly upgraded recycle lube oils can be produced using ALD-deposited active metal catalysts. The use of H{sup 1} and C{sup 13} NMR for the characterization of the treated lube oils has been shown to be effective.

  7. Ambient RFID Services Infrastructure & RFID Deployment in Wood industry

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    a comparative study of different control systems, like Holonic Manufacturing Systems (HMS) or Product workshop and the planning system, has been developed to answer to a mass production context, that is to say of the bottleneck and the service level. To achieve to these objectives a Product information based control project

  8. President Obama Announces Commitments and Executive Actions to Advance Solar Deployment and Energy Efficiency

    Broader source: Energy.gov [DOE]

    On May 9, 2014, President Obama announced more than 300 private and public sector commitments to create jobs and cut carbon pollution by advancing solar deployment and energy efficiency.

  9. Sensor-Aided Overlay Deployment and Relocation for Vast-Scale Sensor Networks

    E-Print Network [OSTI]

    Qiao, Daji

    a wireless sensor network is to monitor a target field and, upon occurrence of events of interest, to deliver are deployed to monitor a huge target area. Moreover, due to the funneling effect, it becomes more difficult

  10. Deployment summary: Fiscal years 1995-2000 [USDOE Office of International Programs

    SciTech Connect (OSTI)

    None

    2000-07-01T23:59:59.000Z

    This publication summarizes the progress made by the Office of International Programs (IP) in deploying innovative technologies for the environmental remediation of the DOE complex and for sites of its international collaborators for fiscal years 1995 through 2000.

  11. Three-dimensional and two-dimensional deployment analysis for underwater acoustic sensor networks q

    E-Print Network [OSTI]

    Pompili, Dario

    Three-dimensional and two-dimensional deployment analysis for underwater acoustic sensor networks q Accepted 23 July 2008 Available online 7 August 2008 Keywords: Underwater acoustic sensor networks data collection, pollution monitoring, offshore exploration, disaster prevention, assisted navigation

  12. Development and Deployment of Generation 3 Plug-In Hybrid Electric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Generation 3 Plug-In Hybrid Electric School Buses Development and Deployment of Generation 3 Plug-In Hybrid Electric School Buses 2011 DOE Hydrogen and Fuel Cells Program, and...

  13. Automatic deployment of autonomous cars in a robotic urban-like environment (RULE)

    E-Print Network [OSTI]

    Itani, Sara T.

    We present a computational framework and experimental setup for deployment of autonomous cars in a miniature Robotic Urban-Like Environment (RULE). The specifications are given in rich, human-like language as temporal logic ...

  14. Effects of trailing edge flap dynamic deployment on blade-vortex interactions

    E-Print Network [OSTI]

    Nelson, Carter T.

    1997-01-01T23:59:59.000Z

    code based on potential flow theory with provisions for deformable geometry to incorporate a trailing edge flap. Experimental tests were conducted using a 2-D wind tunnel setup incorporating a pressure instrumented airfoil section with a deployable 20...

  15. An assessment of the economic, regulatory and technical implications of large-scale solar power deployment

    E-Print Network [OSTI]

    Merrick, James Hubert

    2010-01-01T23:59:59.000Z

    Electricity from solar energy has many favorable attributes. Despite its current high cost relative to other technology options, a combination of cost reductions and policy support measures could lead to increasing deployment ...

  16. The potential impact of renewable energy deployment on natural gas prices in New England

    E-Print Network [OSTI]

    Wiser, Ryan; Bolinger, Mark

    2004-01-01T23:59:59.000Z

    Energy Deployment on Natural Gas Prices in New England Datethe price and supply of natural gas have deepened in recentcan directly hedge natural gas price risk by reducing the

  17. Economic Development from Gigawatt-Scale Wind Deployment in Wyoming (Presentation)

    SciTech Connect (OSTI)

    Lantz, E.

    2011-05-23T23:59:59.000Z

    This presentation provides an overview of economic development in Wyoming from gigawatt-scale wind development and includes a discussion of project context, definitions and caveats, a deployment scenario, modeling inputs, results, and conclusions.

  18. Cloud Computing, REST and Mashups to Simplify RFID Application Development and Deployment

    E-Print Network [OSTI]

    Guinard, Dominique

    While of increasing importance for the real-time enterprise, deployments of Internet of Things infrastructures such as RFID remain complex and expensive. In this paper, we illustrate these challenges by studying the ...

  19. Advancing the Deployment of Utility-Scale Photovoltaic Plants in the Northeast

    SciTech Connect (OSTI)

    Lofaro R.; Villaran, M; Colli, A.

    2012-06-03T23:59:59.000Z

    As one of the premier research laboratories operated by the Department of Energy, Brookhaven National Laboratory (BNL) is pursuing an energy research agenda that focuses on renewable energy systems and will help to secure the nation's energy security. A key element of the BNL research is the advancement of grid-connected utility-scale solar photovoltaic (PV) plants, particularly in the northeastern part of the country where BNL is located. While a great deal of information has been generated regarding solar PV systems located in mostly sunny, hot, arid climates of the southwest US, very little data is available to characterize the performance of these systems in the cool, humid, frequently overcast climates experienced in the northeastern portion of the country. Recognizing that there is both a need and a market for solar PV generation in the northeast, BNL is pursuing research that will advance the deployment of this important renewable energy resource. BNL's research will leverage access to unique time-resolved data sets from the 37MWp solar array recently developed on its campus. In addition, BNL is developing a separate 1MWp solar research array on its campus that will allow field testing of new PV system technologies, including solar modules and balance of plant equipment, such as inverters, energy storage devices, and control platforms. These research capabilities will form the cornerstone of the new Northeast Solar Energy Research Center (NSERC) being developed at BNL. In this paper, an overview of BNL's energy research agenda is given, along with a description of the 37MWp solar array and the NSERC.

  20. DOE Facilitates Market-Driven Solutions to Develop and Deploy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Launches Better Buildings Alliance Indoor Lighting Campaign for Commercial Buildings Central air conditioners circulate cool air through a system of supply and return ducts. |...

  1. Analysis & Tools to Spur Increased Deployment | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    shpmasadawasteheattexas.pdf More Documents & Publications National Certification Standard Geothermal Academy: Focus Center BSU GHP District Heating and Cooling System (Phase I)...

  2. Development and Deployment of Advanced Emission Controls for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Market 2003 DEER Conference Presentation: Cleaire Advanced Emission Controls 2003deeredgar.pdf More Documents & Publications Emission Control Systems and Components for Retrofit...

  3. DEPLOYING TECHNOLOGY ADVANCEMENTS FOR CHARACTERIZING THE VADOSE ZONE IN SINGLE-SHELL TANK WASTE MANAGEMENT AREAS

    SciTech Connect (OSTI)

    EBERLEIN SJ; SYDNOR HA; DA MYERS

    2010-01-14T23:59:59.000Z

    As much as one million gallons of waste is believed to have leaked from tanks, pipelines or other equipment in the single-shell tank farm waste management areas (WMAs) within the 200 East and West areas of the U.S. Department of Energy's Hanford Site near Richland, Washington. Although some contamination has reached groundwater, most contamination still resides in the vadose zone. The magnitude ofthis problem requires new approaches for soil characterization if we are to understand the nature and extent of the contamination and take action to protect the enviromnent. Because of the complexity and expense of drilling traditional boreholes in contaminated soil, direct push characterization using a hydraulic hammer has been extensively employed. Direct push probe holes <3-inch diameter have been pushed to a maximum depth of 240 feet below ground surface in 200 East area. Previously gross gamma and moisture logging of these narrow probe holes was perfonned to identify the location of cesium-137 ({sup 137}Cs) (which has limited mobility in Hanford soil) and moisture peaks. Recently a bismuth germinate detector has been deployed for detecting and quantifying the spectrum of cobalt-60 ({sup 60}Co) (a more mobile contaminant), which provides additional information. The direct push system is configured to allow the collection ofmultiple soil core samples throughout the depth ofthe probe hole. The direct push unit has been used to place individual electrodes at a variety of depths as the probe hole is being decommissioned. These deep electrodes enable the use of soil resistivity measurement methods between surface and deep electrodes as-well-as between sets of deep electrodes. Initial testing of surface-to-deep electrode resistivity measurements in WMA C demonstrated significant improvement in defining the three dimensional extent of a contamination plume. A multiple-electrode string is presently being developed to further enhance the resolution of resistivity data. The combined use of direct push logging/sampling and soil resistivity measurement allows more extensive characterization of the large tank farm WMAs with less cost and time commitment than required by traditional methods. An additional tool is in the laboratory testing stage to support these investigations. A beta detection tool is being evaluated to determine if it might be deployed with the direct push unit to identify technetium-99 ({sup 99}Tc) contamination. {sup 99}Tc is a mobile, long-lived contaminant that is the major risk driver from tank waste contamination. A screening tool to locate {sup 99}Tc contamination is anticipated to further increase the cost-effectiveness ofvadose zone characterization efforts.

  4. CSP Heat Integration for Baseload Renewable Energy Deployment

    Broader source: Energy.gov [DOE]

    In October 2013, DOE announced an award under the Concentrating Solar Power (CSP) Heat Integration for Baseload Renewable Energy Development (HIBRED) program to advance the state of the art in CSP hybrid plants, which incorporate thermal and or chemical energy from a CSP system into a fossil fueled power generation system, managed by the SunShot Initiative.

  5. Secure workflow deployment in multi-organizational environments

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    .cuppens@telecom-bretagne.eu) Abstract: Workfow Management Systems (WFMS) are concerned with the control and coordination of operational simple coordinative requirements, the flow of control and data may be easily mapped onto process effectiveness. With the diversity of resources, subjects and activities in the system, ensuring a secure

  6. andco-torrax slagging pyrolysis system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of pyrolysis biochar systems to determine greenhouse gas balance, using an original spreadsheet model. System parameters reflect deployment in Scotland, ... Hammond, James A R...

  7. Large-scale Demonstration and Deployment Project for D&D of Fuel Storage Canals and Associated Facilities at INEEL

    SciTech Connect (OSTI)

    Whitmill, Larry Joseph

    2001-12-01T23:59:59.000Z

    The Department of Energy (DOE) Office of Science and Technology (OST), Deactivation and Decommissioning Focus Area (DDFA), sponsored a Large Scale Demonstration and Deployment Project (LSDDP) at the Idaho National Engineering and Environmental Laboratory (INEEL) under management of the DOE National Energy Technology Laboratory (NETL). The INEEL LSDDP is one of several LSDDPs sponsored by DOE. The LSDDP process integrates field demonstrations into actual decontamination and decommissioning (D&D) operations by comparing new or improved technologies against existing baseline technologies using a side-by-side comparison. The goals are (a) to identify technologies that are cheaper, safer, faster, and cleaner (produce less waste), and (b) to incorporate those technologies into D&D baseline operations. The INEEL LSDDP reviewed more than 300 technologies, screened 141, and demonstrated 17. These 17 technologies have been deployed a total of 70 times at facilities other than those where the technology was demonstrated, and 10 have become baseline at the INEEL. Fifteen INEEL D&D needs have been modified or removed from the Needs Management System as a direct result of using these new technologies. Conservatively, the ten-year projected cost savings at the INEEL resulting from use of the technologies demonstrated in this INEEL LSDDP exceeds $39 million dollars.

  8. Readily Available Data Help to Overcome Geothermal Deployment...

    Broader source: Energy.gov (indexed) [DOE]

    Access to high-quality, geothermal-relevant data has been named as the single greatest need in the geothermal industry. The National Geothermal Data System (NGDS) is based on a DOE...

  9. Abstract: Development and Deployment of a Short Rotation Woody...

    Broader source: Energy.gov (indexed) [DOE]

    highlights a project that will develop a single pass cut and chip harvesting system for short rotation woody crops that will improve the harvesting and logistic costs of processing...

  10. Vertical profiles of radar reflectivity of convective cells in tropical and mid-latitude mesoscale convective systems

    E-Print Network [OSTI]

    Lutz, Kurt Reed

    1992-01-01T23:59:59.000Z

    meteorological phenomenon of particular interest to forecasters is the mesoscale convective system (MCS). Chappell (1986) defines an MCS as "any multicellular storm or group of interacting storms that suggests some organization in its forcing". An MCS...VERTICAL PROFILES OF RADAR REFLECTIVITY OF CONVECTIVE CELLS IN TROPICAL AND MID-LATITUDE MESOSCALE CONVECTIVE SYSTEMS A Thesis by KURT REED LUTZ Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment...

  11. Russian Pulsating Mixer Pump Deployment in the Gunite and Associated Tanks at ORNL

    SciTech Connect (OSTI)

    Hatchell, Brian K.; Lewis, Ben; Johnson, Marshall A.; Randolph, J. G.

    2001-03-01T23:59:59.000Z

    In FY 1998, Pulsating Mixer Pump (PMP) technology, consisting of a jet mixer powered by a reciprocating air supply, was selected for deployment in one of the Gunite and Associated Tanks at Oak Ridge National Laboratory (ORNL) to mobilize settled solids. The pulsating mixer pump technology was identified during FY 1996 and FY 1997 technical exchanges between the U.S. Department of Energy (DOE) Tanks Focus Area Retrieval and Closure program, the DOE Environmental Management International Programs, and delegates from Russia as a promising technology that could be implemented in the DOE complex. During FY 1997, the pulsating mixer pump technology, provided by the Russian Integrated Mining Chemical Company, was tested at Pacific Northwest National Laboratory (PNNL) to observe its ability to suspend settled solids. Based on the results of this demonstration, ORNL and DOE staff determined that a modified pulsating mixer pump would meet project needs for remote sludge mobilization of Gunite tank sludge and reduce the cost of operation and maintenance of more expensive mixing systems. The functions and requirements of the system were developed by combining the results and recommendations from the pulsating mixer pump demonstration at PNNL with the requirements identified by staff at ORNL involved with the remediation of the Gunite and Associated Tanks. The PMP is comprised of a pump chamber, check valve, a working gas supply pipe, a discharge manifold, and four jet nozzles. The pump uses two distinct cycles, fill and discharge, to perform its mixing action. During the fill cycle, vacuum is applied to the pump chamber by an eductor, which draws liquid into the pump. When the liquid level inside the chamber reaches a certain level, the chamber is pressurized with compressed air to discharge the liquid through the jet nozzles and back into the tank to mobilize sludge and settled solids.

  12. Deployment of a Suite of High-Performance Computational Tools for Multi-scale Multi-physics Simulation of Generation IV Reactors

    SciTech Connect (OSTI)

    Podowski, Michael Z

    2013-01-03T23:59:59.000Z

    The overall objective of this project has been to deploy advanced simulation capabilities for next generation reactor systems utilizing newly available, high-performance computing facilities. The approach includes the following major components: The development of new simulation capabilities using state-of-the-art computer codes of different scales: molecular dynamics (MD) level, DNS (FronTier and PHASTA) and CFD (NPHASE-CMFD); The development of advanced numerical solvers for large-size computational problems; The deployment of a multiple-code computational platform for multiscale simulations of gas/liquid two-phase flow during reactor transients and accidents; and Application of the new computational methodology to study the progression of loss-of-flow accident in sodium fast reactor (SFR).

  13. Control is a key enabling technology for the deploy-

    E-Print Network [OSTI]

    Hiskens, Ian A.

    environmental impact of fossil-based energy systems. Harvesting energy on a large scale is undoubtedly one of energy (the fuel) can be manipulated, this is not true for solar and wind energies. The main problems% in Denmark, 14% in Spain and Portugal, and 7% in Germany and Ireland. Government subsidies have been a

  14. Orthogonal Capability Building Blocks for Flexible AHS Deployment

    E-Print Network [OSTI]

    Koopman, Philip

    System (AHS) was a user service that provides fully automated vehicle control on dedicated highway lanes to also consider lanes that serve both automated and manually operated vehicles. [NAHSC, 1996, chapter 7, PA 15213 USA Pittsburgh, PA 15213 USA ABSTRACT Once a baseline level of full automation is possible

  15. Development and Deployment of an Advanced Wind Forecasting Technique

    E-Print Network [OSTI]

    Kemner, Ken

    findings. Part 2 addresses how operators of wind power plants and power systems can incorporate advanced the output of advanced wind energy forecasts into decision support models for wind power plant and power and applications of power market simulation models around the world. Argonne's software tools are used extensively

  16. Developing and Deploying Advanced Algorithms to Novel Supercomputing Hardware

    E-Print Network [OSTI]

    Robert J. Brunner; Volodymyr V. Kindratenko; Adam D. Myers

    2007-11-21T23:59:59.000Z

    The objective of our research is to demonstrate the practical usage and orders of magnitude speedup of real-world applications by using alternative technologies to support high performance computing. Currently, the main barrier to the widespread adoption of this technology is the lack of development tools and case studies that typically impede non-specialists that might otherwise develop applications that could leverage these technologies. By partnering with the Innovative Systems Laboratory at the National Center for Supercomputing, we have obtained access to several novel technologies, including several Field-Programmable Gate Array (FPGA) systems, NVidia Graphics Processing Units (GPUs), and the STI Cell BE platform. Our goal is to not only demonstrate the capabilities of these systems, but to also serve as guides for others to follow in our path. To date, we have explored the efficacy of the SRC-6 MAP-C and MAP-E and SGI RASC Athena and RC100 reconfigurable computing platforms in supporting a two-point correlation function which is used in a number of different scientific domains. In a brute force test, the FPGA based single-processor system has achieved an almost two orders of magnitude speedup over a single-processor CPU system. We are now developing implementations of this algorithm on other platforms, including one using a GPU. Given the considerable efforts of the cosmology community in optimizing these classes of algorithms, we are currently working to implement an optimized version of the basic family of correlation functions by using tree-based data structures. Finally, we are also exploring other algorithms, such as instance-based classifiers, power spectrum estimators, and higher-order correlation functions that are also commonly used in a wide range of scientific disciplines.

  17. Take-or-pay Contracts for Renewables Deployment

    E-Print Network [OSTI]

    Johnston, Angus; Kavali, Amalia; Neuhoff, Karsten

    a limited number of participants will propose off-shore wind parks, such auction might involve price ceilings to avoid exercise of market power (similar to price floors in auctions to access to the UK gas network at terminals that are supplied... efficiently into the overall power system, irrespective of the evolution of future balancing and congestion management arrangements. The approach also creates strong incentives for the availability of the power station. This is particularly important...

  18. NREL: Technology Deployment - Disaster Recovery Support at FEMA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCostBuilding Energy Systems NRELAchieved

  19. NREL: Technology Deployment - Disaster Resiliency and Recovery Example

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCostBuilding Energy Systems

  20. NREL: Technology Deployment - Disaster Resiliency and Recovery Example

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCostBuilding Energy SystemsProject:

  1. NREL: Technology Deployment - Disaster Resiliency and Recovery Example

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCostBuilding Energy SystemsProject:Project:

  2. Examining CCS deployment potential in China via application of an integrated CCS cost curve

    SciTech Connect (OSTI)

    Dahowski, Robert T.; Davidson, Casie L.; Li, Xiaochun; Wei, Ning

    2013-06-01T23:59:59.000Z

    Cost curves focusing on CO2 transport and storage have been previously published and used to help establish the large potential for CCS technologies to deploy in China. This paper examines the results from recent work to incorporate the costs of CO2 capture and compression within integrated cost curves that better reflect the complete costs and therefore possible value of CCS. Results show that significant potential exists for large-scale deployment of CCS at costs less than $70/tCO2. Mapping of the cost curve results confirms that the majority of existing CO2 point sources may be able to utilize CCS technologies, and that - except for many sources in southern China - onshore storage capacity appears accessible and sufficient for decades of large-scale deployment.

  3. Energy Department Selects 11 Tribal Communities to Deploy Energy Efficiency

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian NuclearandJunetrackEllen O'KaneSystemsDepartmentCarbonAll 50Department

  4. Evaluation of Radiometers Deployed at the National Renewable Energy Laboratory's Solar Radiation Research Laboratory

    SciTech Connect (OSTI)

    Habte, A.; Wilcox, S.; Stoffel, T.

    2014-02-01T23:59:59.000Z

    This study analyzes the performance of various commercially available radiometers used for measuring global horizontal irradiances and direct normal irradiances. These include pyranometers, pyrheliometers, rotating shadowband radiometers, and a pyranometer with fixed internal shading and are all deployed at the National Renewable Energy Laboratory's Solar Radiation Research Laboratory. Data from 32 global horizontal irradiance and 19 direct normal irradiance radiometers are presented. The radiometers in this study were deployed for one year (from April 1, 2011, through March 31, 2012) and compared to measurements from radiometers with the lowest values of estimated measurement uncertainties for producing reference global horizontal irradiances and direct normal irradiances.

  5. VisPortal: Deploying grid-enabled visualization tools through a web-portal interface

    SciTech Connect (OSTI)

    Bethel, Wes; Siegerist, Cristina; Shalf, John; Shetty, Praveenkumar; Jankun-Kelly, T.J.; Kreylos, Oliver; Ma, Kwan-Liu

    2003-06-09T23:59:59.000Z

    The LBNL/NERSC Visportal effort explores ways to deliver advanced Remote/Distributed Visualization (RDV) capabilities through a Grid-enabled web-portal interface. The effort focuses on latency tolerant distributed visualization algorithms, GUI designs that are more appropriate for the capabilities of web interfaces, and refactoring parallel-distributed applications to work in a N-tiered component deployment strategy. Most importantly, our aim is to leverage commercially-supported technology as much as possible in order to create a deployable, supportable, and hence viable platform for delivering grid-based visualization services to collaboratory users.

  6. EPA/ITRC-RTDF permeable reactive barrier short course. Permeable reactive barriers: Application and deployment

    SciTech Connect (OSTI)

    Not Available

    1999-01-01T23:59:59.000Z

    This report focuses on the following: Permeable Reactive Barriers: Application and Deployment; Introduction to Permeable Reactive Barriers (PRBs) for Remediating and Managing Contaminated Groundwater in Situ; Collection and Interpretation of Design Data 1: Site Characterization for PRBs; Reactive Materials: Zero-Valent Iron; Collection and Interpretation of Design Data 2: Laboratory and Pilot Scale Tests; Design Calculations; Compliance Monitoring, Performance Monitoring and Long-Term Maintenance for PRBs; PRB Emplacement Techniques; PRB Permitting and Implementation; Treatment of Metals; Non-Metallic Reactive Materials; Economic Considerations for PRB Deployment; and Bibliography.

  7. EPA/ITRC-RTDF permeable reactive barrier short course. Permeable reactive barriers: Application and deployment

    SciTech Connect (OSTI)

    NONE

    1999-11-01T23:59:59.000Z

    This report focuses on the following: Permeable Reactive Barriers: Application and Deployment; Introduction to Permeable Reactive Barriers (PRBs) for Remediating and Managing Contaminated Groundwater in Situ; Collection and Interpretation of Design Data 1: Site Characterization for PRBs; Reactive Materials: Zero-Valent Iron; Collection and Interpretation of Design Data 2: Laboratory and Pilot Scale Tests; Design Calculations; Compliance Monitoring, Performance Monitoring and Long-Term Maintenance for PRBs; PRB Emplacement Techniques; PRB Permitting and Implementation; Treatment of Metals; Non-Metallic Reactive Materials; Economic Considerations for PRB Deployment; and Bibliography.

  8. The role of oxalic acid on the dissolution of granitic sand: an experimental investigation in a hydrothermal flow-through system

    E-Print Network [OSTI]

    Reed, Christy Lynn

    1990-01-01T23:59:59.000Z

    THE ROLE OF OXALIC ACID ON THE DISSOLUTION OF GRANITIC SAND: AN EXPERIMENTAL INVESTIGATION IN A HYDROTHERMAL FLOW-THROUGH SYSTEM A Thesis by CHRISTY LYNN REED Submitted to the Office of Graduate Studies of Texas A&M University in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1990 Major Subject: Geology THE ROLE OF OXALIC ACID ON THE DISSOLUTION OF GRANITIC SAND: AN EXPERIMENTAL INVESTIGATION IN A HYDROTHERMAL FLOW-THROUGH SYSTEM A Thesis...

  9. The role of oxalic acid on the dissolution of granitic sand: an experimental investigation in a hydrothermal flow-through system 

    E-Print Network [OSTI]

    Reed, Christy Lynn

    1990-01-01T23:59:59.000Z

    THE ROLE OF OXALIC ACID ON THE DISSOLUTION OF GRANITIC SAND: AN EXPERIMENTAL INVESTIGATION IN A HYDROTHERMAL FLOW-THROUGH SYSTEM A Thesis by CHRISTY LYNN REED Submitted to the Office of Graduate Studies of Texas A&M University in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1990 Major Subject: Geology THE ROLE OF OXALIC ACID ON THE DISSOLUTION OF GRANITIC SAND: AN EXPERIMENTAL INVESTIGATION IN A HYDROTHERMAL FLOW-THROUGH SYSTEM A Thesis...

  10. Metric spaces as models for real-time concurrency G.M. Reed and A.W. Roscoe1

    E-Print Network [OSTI]

    Roscoe, Bill

    Pro- cesses) We shall essentially extend the abstract syntax for untimed CSP from [BHR,BR] (with for real time concurrent systems, based on the fail- ures model for CSP. The fixed point theory is based. We have chosen to base our work on (extensions of) the theoretical version of CSP and to try

  11. Deployment of pollution prevention during design -- a case study

    SciTech Connect (OSTI)

    Del Mar, R.A.

    1997-08-15T23:59:59.000Z

    Traditionally, pollution prevention (P2) assessments have been performed on existing facilities and ongoing operations, well after the completion of design and construction. It has been theorized that more success can be achieved by moving P2 upstream into the design process, where an estimated 70% of a project`s total life cycle costs are initially fixed. Decisions made during design to prevent or minimize the amount of waste generated can reap benefits for many years to come. This is especially true when designing systems for handling hazardous and radioactive wastes for treatment, storage, and disposal. P2 assessments performed during design of such projects can uncover significant savings to be reaped during project construction, operations, and/or decommissioning. However, many project managers are still reluctant to include some type of P2 review or assessment as part of the design effort, because the immediate payback to the design entity is difficult to quantify. This paper presents the results of a P2 assessment performed on a design project at Hanford which identified close to $500,000 in construction savings while minimizing low-level and mixed radioactive waste generation. This paper describes the process used to per-form the assessment, discusses its results, and provides lessons-learned for future P2 design assessments.

  12. Roads2HyCOM Research co-Ordination, Assessment, Deployment and

    E-Print Network [OSTI]

    of which nine are specific to hydrogen (H2) and/or fuel cell (FC) technology and two to generalRoads2HyCOM Research co-Ordination, Assessment, Deployment and Support to HyCOM (Hydrogen October 2006 Work Package 3 Task 3.1-2, Deliverable D3.1b 1. A study of experiences with hydrogen

  13. A Model-Based Framework for Developing and Deploying Data Aggregation Services

    E-Print Network [OSTI]

    Prasanna, Viktor K.

    A Model-Based Framework for Developing and Deploying Data Aggregation Services Ramakrishna Soma1 , Amol Bakshi2 , V.K.Prasanna2 , Will Da Sie3 1 Dept of Computer Science, USC, Los Angeles, CA 2 Dept of Electrical Engineering, USC, Los Angeles, CA {rsoma, amol, prasanna}@usc.edu 3 Chevron Corporation, San Ramon

  14. User Interaction and Uptake Challenges to Successfully Deploying Semantic Web Technologies

    E-Print Network [OSTI]

    Web applications and services at the 3rd European Semantic Web Conference (ESWC2006), before the deployment of Semantic Web technologies at the 3rd European Semantic Web Conference (ESWC2006), in Budva Technical Report kmi-06-18 September 2006 Tom Heath, John Domingue, Paul Shabajee Published In: Proceedings

  15. WARPnet: Clean Slate Research on Deployed Wireless Siddharth Gupta, Chris Hunter, Patrick Murphy and Ashutosh Sabharwal

    E-Print Network [OSTI]

    WARPnet: Clean Slate Research on Deployed Wireless Networks Siddharth Gupta, Chris Hunter, Patrick to allow clean-slate prototyping of real-time wireless networks, which can both be tested in the lab clean-slate programmability of any subset of nodes in the network. Second, the platform should have ex

  16. Deployable Tensegrity Reflectors for Small Satellites1 A.G. Tibert2 and S. Pellegrino3

    E-Print Network [OSTI]

    Pellegrino, Sergio

    of Cambridge, Trumpington Street, Cambridge, CB2 1PZ, U.K. Abstract Future small satellite missions require low-cost, precision reflector structures with large aperture that can be packaged in a small envelope. Existing that deploys two identical cable nets (front and rear nets) interconnected by tension ties; the reflecting mesh

  17. Chapter 6: Innovation-Focused Policy Framework for TW-Scale PV Deployment

    E-Print Network [OSTI]

    Kammen, Daniel M.

    1 Chapter 6: Innovation-Focused Policy Framework for TW-Scale PV Deployment 6.1. Demand, and installation, which all have one common goal: to reduce the cost of PV technology and make it an affordable & development (R&D). These policy instruments in the PV sector can be broadly categorized into two approaches

  18. American Institute of Aeronautics and Astronautics Deployable Inspector Spacecraft for Distributed Field

    E-Print Network [OSTI]

    Smart, William

    maneuvers in the region near the parent, performs the required measurements, relays the data, and then re field maps of the vehicles RF, magnetic or nuclear emissions. One proposed solution to this inspection problem is a small, low-cost deployable spacecraft that detaches from its parent vehicle, performs its

  19. Approximation Algorithms For Wireless Sensor Deployment Xiaochun Xu and Sartaj Sahni

    E-Print Network [OSTI]

    Sahni, Sartaj K.

    will be able to adequately monitor the target region. When site selection is possible, we use deterministic of the problem considered here is in the deployment of chemical and radioactive sensors so as to monitor high risk targets that may be approximated as points; the cost of a sensor may be from hundreds of dollars

  20. Challenges and Opportunities in Large-Scale Deployment of Automated Energy Consumption

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    to the locational marginal price (LMP) at that bus. We show that a key challenge in large- scale deployment of ECS, locational marginal price. I. INTRODUCTION Real-time and time-of-use electricity pricing models can- edge among users on how to respond to time-varying prices and the lack of effective home automation

  1. Towards a deployable satellite gripper based on multisegment dielectric elastomer minimum energy

    E-Print Network [OSTI]

    Floreano, Dario

    Towards a deployable satellite gripper based on multisegment dielectric elastomer minimum energy dielectric elastomer minimum energy structures O. A. Araromi*a , I. Gavrilovichb , J. Shintakea , S. Rosseta , H. R. Sheaa a Microsystems For Space Technologies Laboratory, �cole Polytechnique Fédérale de

  2. Div ision of T echnology, Industry & Economics Energy Branch Deploying renewable energy

    E-Print Network [OSTI]

    Canet, Léonie

    Div ision of T echnology, Industry & Economics Energy Branch Deploying renewable energy, Industry & Economics Energy Branch 1. Policy landscape 2. Helping transition to Renewable Energy 3 governments are promoting renewable energy. Renewable energy ­ Policy Landscape #12;Div ision of T echnology

  3. Heterogeneous Wireless Sensor Network Deployment and Topology Control Based on Irregular Sensor Model

    E-Print Network [OSTI]

    Chung, Yeh-Ching

    Heterogeneous Wireless Sensor Network Deployment and Topology Control Based on Irregular Sensor Introduction Wireless sensor network (WSN) is a key element of the pervasive/ubiquitous computing sensor network (heterogeneous WSN) consists of sensor nodes with different ability, such as different

  4. IEEE COMMUNICATIONS MAGAZINE, VOL. XX, NO. Y, 2013 1 Automated Small-Cell Deployment for

    E-Print Network [OSTI]

    Davies, Christopher

    - and energy-efficient method of improving local spectral efficiency. Whilst unarticulated cell deployments can§ University of Warwick, UK, Email: weisi.guo@warwick.ac.uk University of South Australia, Australia, Email, capital expenditure, and energy consumption of the cellular network. The theoretical work is supported

  5. Development and Deployment of a Large-Scale Flower Recognition Mobile App

    E-Print Network [OSTI]

    engine and re- lies on computer vision recognition technology. The mobile phone app is available freeDevelopment and Deployment of a Large-Scale Flower Recognition Mobile App Anelia Angelova NEC Labs- eration of user generated content, especially from mobile de- vices, there is a need to develop

  6. Samovar : An evaluation framework for real time applications deployment Lionel Havet

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    have to meet specific require- ments in terms of performance, dependability, energy and cost which for the a priori validation, deployment optimization and fine tuning and sizing in terms of safety, resources usage able to represent their continuous aspects: hybrid automata, hybrid Petri Nets, etc

  7. IEEE IGARSS 03, Toulouse, France, July 2003 Puerto Rico Deployable Radar Network

    E-Print Network [OSTI]

    Cruz-Pol, Sandra L.

    IEEE IGARSS 03, Toulouse, France, July 2003 Puerto Rico Deployable Radar Network Design; Site of Atmospheric Events (CLiMMATE) Electrical and Computer Engineering Department University of Puerto Rico (CLiMMATE) Laboratory at the University of Puerto Rico at Mayagüez are collaborating to modify a MK2

  8. National Deployment Strategy for Truck Stop Electrification Josias Zietsman, Ph.D., P.E.*

    E-Print Network [OSTI]

    ,000 long-haul trucks operating in the United States (2). The U.S. Department of Transportation mandates that drivers spend resting and sleeping in the cabs of their trucks. As a consequence, long-haul truck driversNational Deployment Strategy for Truck Stop Electrification by Josias Zietsman, Ph.D., P

  9. Comparison of House and Senate Clean Energy Deployment Administration (CEDA) provisions

    E-Print Network [OSTI]

    Laughlin, Robert B.

    Comparison of House and Senate Clean Energy Deployment Administration (CEDA) provisions What is CEDA? Both the American Clean Energy Leadership Act of 2009 (ACELA) in the Senate and Subtitle J- Nuclear and Advanced Technologies of the American Clean Energy and Security Act (H.R. 2454) in the House

  10. Mobile Access of Wide-Spectrum Networks: Design, Deployment and Experimental Evaluation

    E-Print Network [OSTI]

    Knightly, Edward W.

    --Wireless networks increasingly utilize diverse spec- tral bands that exhibit vast differences in both transmissionMobile Access of Wide-Spectrum Networks: Design, Deployment and Experimental Evaluation Anastasios Giannoulis Paul Patras Edward W. Knightly Dept. of Electrical and Computer Engineering, Rice University

  11. SUDAN: ANATOMY OF A CONFLICT Escalation: SAF and SPLA Force Deployment Within and Around Abyei

    E-Print Network [OSTI]

    Chou, James

    SUDAN: ANATOMY OF A CONFLICT Chapter I Escalation: SAF and SPLA Force Deployment Within and Around Abyei Mid-2010 to January 2011 1 Harvard Humanitarian Initiative Sudan: Anatomy of a Conflict Executive in Sudan Since January 2011, humanitarian actors and international observers, including United Nations

  12. Demo Abstract: Wireless Sensor Network for Substation Monitoring: Design and Deployment

    E-Print Network [OSTI]

    Nasipuri, Asis

    -voltage substations, lower installation cost, and utilization of the distributed pro- cessing capabilities of wirelessDemo Abstract: Wireless Sensor Network for Substation Monitoring: Design and Deployment Asis-Transmissions & Substations 9625 Research Drive Charlotte, NC 28262 {lvanderz,birodriguez} @epri.com Ralph McKosky, Joseph

  13. Middleware Support for the Deployment of Resource-Aware Parallel Java Components on Heterogeneous Distributed Platforms

    E-Print Network [OSTI]

    Boyer, Edmond

    Distributed Platforms Yves Mahéo, Frédéric Guidec, Luc Courtrai VALORIA Laboratory, Université de Bretagne of the Concerto platform, which is dedicated to supporting the deployment of resource-aware parallel Java components on heteroge- neous distributed platforms, such as pools of workstations in labs or offices. Our

  14. VoxNet: An Interactive, Rapidly-Deployable Acoustic Monitoring Platform

    E-Print Network [OSTI]

    Grether, Gregory

    VoxNet: An Interactive, Rapidly-Deployable Acoustic Monitoring Platform Michael Allen Cogent applica- tions and virtual fences. VoxNet is a complete hardware and software platform for distributed environments; (2) a high level pro- gramming language that abstracts the user from platform and network details

  15. Development and deployment of constitutive softening routines in Eulerian hydrocodes.

    SciTech Connect (OSTI)

    Fuller, Timothy Jesse; Dewers, Thomas A.; Swan, Matthew Scot

    2013-03-01T23:59:59.000Z

    The state of the art in failure modeling enables assessment of crack nucleation, propagation, and progression to fragmentation due to high velocity impact. Vulnerability assessments suggest a need to track material behavior through failure, to the point of fragmentation and beyond. This eld of research is particularly challenging for structures made of porous quasi-brittle materials, such as ceramics used in modern armor systems, due to the complex material response when loading exceeds the quasi-brittle material's elastic limit. Further complications arise when incorporating the quasi-brittle material response in multi-material Eulerian hydrocode simulations. In this report, recent e orts in coupling a ceramic materials response in the post-failure regime with an Eulerian hydro code are described. Material behavior is modeled by the Kayenta material model [2]and Alegra as the host nite element code [14]. Kayenta, a three invariant phenomenological plasticity model originally developed for modeling the stress response of geologic materials, has in recent years been used with some success in the modeling of ceramic and other quasi-brittle materials to high velocity impact. Due to the granular nature of ceramic materials, Kayenta allows for signi cant pressures to develop due to dilatant plastic ow, even in shear dominated loading where traditional equations of state predict little or no pressure response. When a material's ability to carry further load is compromised, Kayenta allows the material's strength and sti ness to progressively degrade through the evolution of damage to the point of material failure. As material dilatation and damage progress, accommodations are made within Alegra to treat in a consistent manner the evolving state.

  16. Nuclear-fuel-cycle facility deployment and price generation

    SciTech Connect (OSTI)

    Andress, D.A.

    1981-04-01T23:59:59.000Z

    The enrichment process and how it is to be modeled in the International Nuclear Model (INM) is described. The details of enrichment production, planning, unit price generation, demand estimation and ordering are examined. The enrichment process from both the producer's and the utility's point of view is analyzed. The enrichment separative-work-unit (SWU) contracts are also discussed. The relationship of the enrichment process with other sectors of the nuclear fuel cycle, expecially uranium mining and milling is considered. There are portions of the enrichment process that are not completely understood at the present time. These areas, which require further study, will be pinpointed in the following discussion. In many cases, e.g., the advent of SMU brokerage activities, the answers will emerge only in time. In other cases, e.g., political trends, uncertainties will always remain. It is possible to cast the uncertainties in a probabilistic framework, but this is beyond the scope of this report. INM, a comprehensive model of the international nuclear industry, simulates the market decision process based on current and future price expectations under a broad range of scenario specifications. INM determines the proper reactor mix as well as the planning, operation, and unit price generation of the attendant nuclear fuel cycle facilities. The level of detail of many of the enrichment activities presented in this report, e.g., the enrichment contracts, is too fine to be incorporated into INM. Nevertheless, they are presented in a form that is ammendable to modeling. The reasons for this are two-fold. First, it shows the level of complexity that would be required to model the entire system. Second, it presents the structural framework for a detailed, stand-alone enrichment model.

  17. DEVELOPMENT OF METHODOLOGY AND FIELD DEPLOYABLE SAMPLING TOOLS FOR SPENT NUCLEAR FUEL INTERROGATION IN LIQUID STORAGE

    SciTech Connect (OSTI)

    Berry, T.; Milliken, C.; Martinez-Rodriguez, M.; Hathcock, D.; Heitkamp, M.

    2012-06-04T23:59:59.000Z

    This project developed methodology and field deployable tools (test kits) to analyze the chemical and microbiological condition of the fuel storage medium and determine the oxide thickness on the spent fuel basin materials. The overall objective of this project was to determine the amount of time fuel has spent in a storage basin to determine if the operation of the reactor and storage basin is consistent with safeguard declarations or expectations. This project developed and validated forensic tools that can be used to predict the age and condition of spent nuclear fuels stored in liquid basins based on key physical, chemical and microbiological basin characteristics. Key parameters were identified based on a literature review, the parameters were used to design test cells for corrosion analyses, tools were purchased to analyze the key parameters, and these were used to characterize an active spent fuel basin, the Savannah River Site (SRS) L-Area basin. The key parameters identified in the literature review included chloride concentration, conductivity, and total organic carbon level. Focus was also placed on aluminum based cladding because of their application to weapons production. The literature review was helpful in identifying important parameters, but relationships between these parameters and corrosion rates were not available. Bench scale test systems were designed, operated, harvested, and analyzed to determine corrosion relationships between water parameters and water conditions, chemistry and microbiological conditions. The data from the bench scale system indicated that corrosion rates were dependent on total organic carbon levels and chloride concentrations. The highest corrosion rates were observed in test cells amended with sediment, a large microbial inoculum and an organic carbon source. A complete characterization test kit was field tested to characterize the SRS L-Area spent fuel basin. The sampling kit consisted of a TOC analyzer, a YSI multiprobe, and a thickness probe. The tools were field tested to determine their ease of use, reliability, and determine the quality of data that each tool could provide. Characterization was done over a two day period in June 2011, and confirmed that the L Area basin is a well operated facility with low corrosion potential.

  18. Integrated Risk Framework for Gigawatt-Scale Deployments of Renewable Energy: The U.S. Wind Energy Case; October 2009

    SciTech Connect (OSTI)

    Ram, B.

    2010-04-01T23:59:59.000Z

    Assessing the potential environmental and human effects of deploying renewable energy on private and public lands, along our coasts, on the Outer Continental Shelf (OCS), and in the Great Lakes requires a new way of evaluating potential environmental and human impacts. The author argues that deployment of renewables requires a framework risk paradigm that underpins effective future siting decisions and public policies.

  19. DOE FY 2010 Budget Request and Recovery Act Funding for Energy Research, Development, Demonstration, and Deployment: Analysis and Recommendations

    SciTech Connect (OSTI)

    Anadon, Laura Diaz; Gallagher, Kelly Sims; Bunn, Matthew

    2009-06-01T23:59:59.000Z

    The combination of the FY 2010 budget request for the Department of Energy (DOE) and the portion of the American Recovery and Reinvestment Act of 2009 (ARRA) funds likely to be available in 2010 would (assuming that they would be split evenly between FY 2010 and FY 2011) result in a doubling in funding available for energy research, development, and deployment (ERD and D) from $3.6 billion in FY 2009 to $7.2 billion in FY 2010. Without the stimulus funds, DOE ERD and D investments in FY 2010 would decrease very slightly when compared to FY 2009. Excluding the $7.5 billion for the Advanced Technology Vehicles Manufacturing Loans in FY 2009, the FY 2010 budget request for deployment represents a 33 percent decrease from the FY 2009 levels from $520 million to $350 million. This decrease is largely due to the large amounts of funds appropriated in ARRA for DOE deployment programs, or $23.6 billion, which are three times greater than those appropriated in the FY 2009 budget. These very substantial funding amounts, coupled with the broad range of institutional innovations the administration is putting in place and movement toward putting a price on carbon emissions, will help accelerate innovation for a broad range of energy technologies. DOE's Advanced Research Projects Agency-Energy (ARPA-E) and the Energy Innovation Hubs are important initiatives that could contribute to two weak points of the government's energy innovation effort, namely funding high-risk projects in transformational technologies and in companies that have not traditionally worked with the government and strengthening the integration of basic and applied research in priority areas. Increasing the funding for different types of energy storage research, providing some support for exploring opportunities in coal-to-liquids with carbon capture and storage (CCS) and coal-and-biomass-to-liquids with CCS, and reducing funding for fission RD and D are other actions that Congress could take in the short-term. Energy storage may play a crucial role in the future of the power and transportation systems, which together consume two thirds of primary energy in the United States. A recent National Academy of Science report recommended carrying out detailed scenario assessments of the penetration of unconventional fuels from coal and coal and biomass with CCS. And the research plan provided for nuclear fission does not justify spending as many funds as were requested. The proposed funding for FY 2010 and the resources from ARRA, however, do not guarantee that the United States will finally enjoy the predictable and consistent publicly-funded energy technology innovation effort that it needs. The Obama administration must put in place a comprehensive energy technology innovation strategy that will ensure that an expanded ERD3 effort is both sustainable and efficient. This commission would be charged with, inter alia, developing a strategy that optimizes the integration of the various stages of innovation (research, development, demonstration, early deployment), as well as integrates efforts across technology areas. The database upon which this analysis is based may be downloaded in Excel format at: http://belfercenter.ksg.harvard.edu/publication/19119/ .

  20. Deploying Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGas SeparationsRelevantDOEDelegationsElectronic

  1. Deployment Requirements

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No53197E T A * S H I E L D * A LFederalCooperation

  2. Middleware for Resource-Aware Deployment and Configuration of Fault-Tolerant Real-time Systems

    E-Print Network [OSTI]

    Lu, Chenyang

    active or primary-backup (also called passive) replication [1]. Due to its low resource consumption that satisfy multiple QoS properties. First, it describes a novel task allocation algorithm for passively significantly less resources. Second, it presents the design of a strategizable allocation engine that enables

  3. Development of rapidly deployable structures for military applications : a system based approach to command post facilities

    E-Print Network [OSTI]

    Hopping, Jakob A

    2006-01-01T23:59:59.000Z

    Today's battlespace is the most dynamic in recorded history. Accompanying other military improvements, Command and Control (C2) technology has also been modernized. In spite of advances in technology, it currently takes ...

  4. Department of Mechanical Engineering Spring 2010 Deployable and Recoverable UUV Antenna System

    E-Print Network [OSTI]

    Demirel, Melik C.

    as the project went on. Hand calculations were done for preliminary checks and validation against computer construction could begin immediately after spring break. ANSYS was used for finite element analysis to make sure the final recommendation would meet temperature and pressure requirements. Prototype construction

  5. Design of a Helicopter Deployable Ground Robotic System for Hazardous Environments

    E-Print Network [OSTI]

    Kochersberger, Kevin

    /terrain interaction model to compute the cost of path traversal. In the CONOPS, the terrain model is generated real

  6. A System for Simulation, Emulation, and Deployment of Heterogeneous Sensor Networks

    E-Print Network [OSTI]

    2004-01-01T23:59:59.000Z

    tery powered to requiring a solar panel, the bene?ts of anby a ?xed infrastructure of solar panels and batteries. This

  7. A Solar Energy System for Long-Term Deployment of AUVs David A. Patch

    E-Print Network [OSTI]

    feasible, is politically, an unsatisfactory solution. Both aluminum- air and zinc-air semi-fuel cells have the endurance capabilities of silver-zinc batteries and have 10 times the endurance of lead-acid. Probably. Battery capacity can be incorporated into the vehicle to meet energy demands. Trade-offs will always

  8. Geographical Information Systems: An Effective Rural ITS Planning, Deployment and Evaluation Tool

    E-Print Network [OSTI]

    McGowen, Patrick

    corridor; the Western Transportation Institute (WTI) is to provide a feasibility assessment, evaluation Resources Inc., ARC-INFO software, WTI is defining problems; prioritizing problems; identifying existing and traffic operations personell. Through the use of GIS, WTI will be able to develop scenarios

  9. Solar Deployment System (SolarDS) Model: Documentation and Sample Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarship Fund3Biology| Nationalof6A2-45832 September 2009 The

  10. DOE AVESTAR Center Deploys 3-D Virtual Training System | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. DepartmentEnergy This partAsAmandaRev.AFP 3I OfficeCommentsEnergy The

  11. IGCC Immersive Training System Deploys at NETL AVESTAR(tm) Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh School footballHydrogen andHypernuclei in Hall link toall2, Issue 27

  12. Development and Deployment of Fixed Wireless Access in South West Nigeria: Performance and Evaluation

    E-Print Network [OSTI]

    Adeniran, Oluwaranti

    2011-01-01T23:59:59.000Z

    Fixed Wireless Access (FWA) involves the use of wireless technology to replace copper to connect subscribers to the telephone network. It is a variant of wireless broadband which provides an alternative in the so-called 'last mile' connectivity between the subscriber and the fixed telecommunications network. FWA could either be narrowband or broadband and it is predominantly deployed using the Code Division Multiple Access (CDMA) technology. In assessing the extent of development and deployment of FWA, the perspective of the operators and users was elicited primarily through the use of questionnaires. Issues like setup cost, tax, Government incentive, availability of infrastructure and manpower applied to the operators while on the users' part factors like quality of service, signal strength as well as call rate were considered. The South western zone of Nigeria is regarded as one of the most urbanized regions in the south of Sahara, this is not out of place considering the fact that Lagos which is the nation...

  13. State Support for Clean Energy Deployment: Lessons Learned for Potential Future Policy

    SciTech Connect (OSTI)

    Kubert, C.; Sinclair, M.

    2011-04-01T23:59:59.000Z

    Proposed federal clean energy initiatives and climate legislation have suggested significant increases to federal funding for clean energy deployment and investment. Many states and utilities have over a decade of experience and spend billions of public dollars every year to support EE/RE deployment through programs that reduce the cost of technologies, provide financing for EE/RE projects, offer technical assistance, and educate market participants. Meanwhile, constraints on public expenditures at all levels of government continue to call upon such programs to demonstrate their value. This report reviews the results of these programs and the specific financial incentives and financing tools used to encourage clean energy investment. Lessons from such programs could be used to inform the future application of EE/RE incentives and financing tools. These lessons learned apply to use of distributed resources and the historical focus of these EE/RE programs.

  14. Design and initial deployment of the wireless local area networking infrastructure at Sandia National Laboratories.

    SciTech Connect (OSTI)

    Long, John P.; Hamill, Michael J.; Mitchell, M. G.; Miller, Marc M.; Witzke, Edward L.; Wiener, Dallas J

    2006-11-01T23:59:59.000Z

    A major portion of the Wireless Networking Project at Sandia National Laboratories over the last few years has been to examine IEEE 802.11 wireless networking for possible use at Sandia and if practical, introduce this technology. This project team deployed 802.11a, b, and g Wireless Local Area Networking at Sandia. This report examines the basics of wireless networking and captures key results from project tests and experiments. It also records project members thoughts and designs on wireless LAN architecture and security issues. It documents some of the actions and milestones of this project, including pilot and production deployment of wireless networking equipment, and captures the team's rationale behind some of the decisions made. Finally, the report examines lessons learned, future directions, and conclusions.

  15. Treatment of Portosystemic Shunt Myelopathy with a Stent Graft Deployed through a Transjugular Intrahepatic Route

    SciTech Connect (OSTI)

    Jain, Deepak, E-mail: deepakjain02@yahoo.com; Arora, Ankur, E-mail: aroradrankur@yahoo.com [Institute of Liver and Biliary Sciences, Department of Radiology (India); Deka, Pranjal, E-mail: drpranjaldeka@gmail.com [Institute of Liver and Biliary Sciences, Department of Hepatopancreatobiliary Surgery (India); Mukund, Amar, E-mail: dramarmukund@gmail.com; Bhatnagar, Shorav, E-mail: drshorav@yahoo.com [Institute of Liver and Biliary Sciences, Department of Radiology (India); Jindal, Deepti, E-mail: deepijindal@rediffmail.com; Kumar, Niteen, E-mail: drniteenkumar@gmail.com; Pamecha, Viniyendra, E-mail: viniyendra@yahoo.co.uk [Institute of Liver and Biliary Sciences, Department of Hepatopancreatobiliary Surgery (India)

    2013-08-01T23:59:59.000Z

    A case of surgically created splenorenal shunt complicated with shunt myelopathy was successfully managed by placement of a stent graft within the splenic vein to close the portosystemic shunt and alleviate myelopathy. To our knowledge, this is the first report of a case of shunt myelopathy in a patient with noncirrhotic portal fibrosis without cirrhosis treated by a novel technique wherein a transjugular intrahepatic route was adopted to deploy the stent graft.

  16. Community Renewable Energy Deployment Provides Replicable Examples of Clean Energy Projects (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01T23:59:59.000Z

    This fact sheet describes the U.S. Department of Energy's Community Renewable Energy Deployment (CommRE) program, which is a more than $20 million effort funded through the American Recovery and Reinvestment Act of 2009, to promote investment in clean energy solutions and provide real-life examples for other local governments, campuses, and small utilities to replicate. Five community-based renewable energy projects received funding from DOE through the CommRE and their progress is detailed.

  17. On Deployment of Multiple Base Stations for Energy-Efficient Communication in Wireless Sensor Networks

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lin, Yunyue; Wu, Qishi; Cai, Xiaoshan; Du, Xiaojiang; Kwon, Ki-Hyeon

    2010-01-01T23:59:59.000Z

    Data transmission from sensor nodes to a base station or a sink node often incurs significant energy consumption, which critically affects network lifetime. We generalize and solve the problem of deploying multiple base stations to maximize network lifetime in terms of two different metrics under one-hop and multihop communication models. In the one-hop communication model, the sensors far away from base stations always deplete their energy much faster than others. We propose an optimal solution and a heuristic approach based on the minimal enclosing circle algorithm to deploy a base station at the geometric center of each cluster. In themore »multihop communication model, both base station location and data routing mechanism need to be considered in maximizing network lifetime. We propose an iterative algorithm based on rigorous mathematical derivations and use linear programming to compute the optimal routing paths for data transmission. Simulation results show the distinguished performance of the proposed deployment algorithms in maximizing network lifetime.« less

  18. Karen Reed | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & Gas » MethaneJohnson ControlsJoyce Yang5 -KITSAPKansasKaren

  19. Mike Reed | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment3311,Official FileEnergy Midsize Wind TurbinesWritten

  20. Camp Reed | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:Power LPInformation 8thCalwind II CEC WindCamelot

  1. Webinar: DOE Funding Opportunity for the Deployment of Clean Energy and Energy Efficiency on Indian Lands (DE-FOA-0001021)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The intent of this webinar is to provide information for potential applicants to the Energy Departments Funding Opportunity for the Deployment of Clean Energy and Energy Efficiency on Indian Lands ...

  2. From New Zealand to Mongolia: Co-Designing and Deploying a Digital Library for the World's Children**

    E-Print Network [OSTI]

    Golbeck, Jennifer

    From New Zealand to Mongolia: Co-Designing and Deploying a Digital Library for the World's Children of Maryland (USA), co-designing has taken place with partners in New Zealand, Honduras, Germany, Mongolia

  3. Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

  4. Scenarios for Benefits Analysis of Energy Research, Development,Demonstration and Deployment

    SciTech Connect (OSTI)

    Gumerman, Etan; Marnay, Chris

    2005-09-07T23:59:59.000Z

    For at least the last decade, evaluation of the benefits of research, development, demonstration, and deployment (RD3) by the U.S. Department of Energy has been conducted using deterministic forecasts that unrealistically presume we can precisely foresee our future 10, 25,or even 50 years hence. This effort tries, in a modest way, to begin a process of recognition that the reality of our energy future is rather one rife with uncertainty. The National Energy Modeling System (NEMS) is used by the Department of Energy's Office of Energy Efficiency and Renewable Energy (EE) and Fossil Energy (FE) for their RD3 benefits evaluation. In order to begin scoping out the uncertainty in these deterministic forecasts, EE and FE designed two futures that differ significantly from the basic NEMS forecast. A High Fuel Price Scenario and a Carbon Cap Scenario were envisioned to forecast alternative futures and the associated benefits. Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) implemented these scenarios into its version of NEMS,NEMS-LBNL, in late 2004, and the Energy Information Agency created six scenarios for FE in early 2005. The creation and implementation of the EE-FE scenarios are explained in this report. Both a Carbon Cap Scenario and a High Fuel Price Scenarios were implemented into the NEMS-LBNL. EIA subsequently modeled similar scenarios using NEMS. While the EIA and LBNL implementations were in some ways rather different, their forecasts do not significantly diverge. Compared to the Reference Scenario, the High Fuel Price Scenario reduces energy consumption by 4 percent in 2025, while in the EIA fuel price scenario (known as Scenario 4) reduction from its corresponding reference scenario (known as Scenario 0) in 2025 is marginal. Nonetheless, the 4 percent demand reduction does not lead to other cascading effects that would significantly differentiate the two scenarios. The LBNL and EIA carbon scenarios were mostly identical. The only major difference was that LBNL started working with the AEO 2004NEMS code and EIA was using AEO 2005 NEMS code. Unlike the High Price Scenario the Carbon Cap scenario gives a radically different forecast than the Reference Scenario. NEMS-LBNL proved that it can handle these alternative scenarios. However, results are price inelastic (for both oil and natural gas prices) within the price range evaluated. Perhaps even higher price paths would lead to a distinctly different forecast than the Reference Scenario. On the other hand, the Carbon Cap Scenario behaves more like an alternative future. The future in the Carbon Cap Scenario has higher electricity prices, reduced driving, more renewable capacity, and reduced energy consumption. The next step for this work is to evaluate the EE benefits under each of the three scenarios. Comparing those three sets of predicted benefits will indicate how much uncertainty is inherent within this sort of deterministic forecasting.

  5. Economic Incentives for Cybersecurity: Using Economics to Design Technologies Ready for Deployment

    SciTech Connect (OSTI)

    Vishik, Claire [Intel Corporation] [Intel Corporation; Sheldon, Frederick T [ORNL] [ORNL; Ott, David [Intel Corporation] [Intel Corporation

    2013-01-01T23:59:59.000Z

    Cybersecurity practice lags behind cyber technology achievements. Solutions designed to address many problems may and do exist but frequently cannot be broadly deployed due to economic constraints. Whereas security economics focuses on the cost/benefit analysis and supply/demand, we believe that more sophisticated theoretical approaches, such as economic modeling, rarely utilized, would derive greater societal benefits. Unfortunately, today technologists pursuing interesting and elegant solutions have little knowledge of the feasibility for broad deployment of their results and cannot anticipate the influences of other technologies, existing infrastructure, and technology evolution, nor bring the solutions lifecycle into the equation. Additionally, potentially viable solutions are not adopted because the risk perceptions by potential providers and users far outweighs the economic incentives to support introduction/adoption of new best practices and technologies that are not well enough defined. In some cases, there is no alignment with redominant and future business models as well as regulatory and policy requirements. This paper provides an overview of the economics of security, reviewing work that helped to define economic models for the Internet economy from the 1990s. We bring forward examples of potential use of theoretical economics in defining metrics for emerging technology areas, positioning infrastructure investment, and building real-time response capability as part of software development. These diverse examples help us understand the gaps in current research. Filling these gaps will be instrumental for defining viable economic incentives, economic policies, regulations as well as early-stage technology development approaches, that can speed up commercialization and deployment of new technologies in cybersecurity.

  6. New Small Hydropower Technology to be Deployed in the United States

    SciTech Connect (OSTI)

    Hadjerioua, Boualem [ORNL; Opsahl, Egil [CleanPower AS; Gordon, Jim [Earth By Design Inc., EBD; Bishop, Norm [Knigth Piesold Co.

    2012-01-01T23:59:59.000Z

    Earth By Design Inc, (EBD), in collaboration with Oak Ridge National Laboratory (ORNL), Knight Pi sold and Co., and CleanPower AS, has responded to a Funding Opportunity Announcement (FOA) published by the Department of Energy (DOE) in April 2011. EBD submitted a proposal to install an innovative, small hydropower technology, the Turbinator, a Norwegian technology from CleanPower. The Turbinator combines an axial flow, fixed-blade Kaplan turbine and generator in a compact and sealed machine. This makes it a very simple and easy technology to be deployed and installed. DOE has awarded funding for this two-year project that will be implemented in Culver, Oregon. ORNL with the collaboration of CleanPower, will assess and evaluate the technology before and during the manufacturing phase and produce a full report to DOE. The goal of this phase-one report is to provide DOE Head Quarters (HQ), water power program management, a report with findings about the performance, readiness, capability, strengths and weakness, limitation of the technology, and potential full-scale deployment and application in the United States. Because of the importance of this information to the conventional hydropower industry and regulators, preliminary results will rapidly be distributed in the form of conference presentations, ORNL/DOE technical reports (publically available online, and publications in the peer-reviewed, scientific literature. These reports will emphasize the relevance of the activities carried out over the two-year study (i.e., performance, robustness, capabilities, reliability, and cost of the Turbinator). A final report will be submitted to a peer-reviewed publication that conveys the experimental findings and discusses their implications for the Turbinator application and implementation. Phase-two of the project consists of deployment, construction, and project operations. A detailed report on assessment and the performance of the project will be presented and communicated to DOE and published by ORNL.

  7. Sandia Energy - Wake Imaging Measurement System

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the flowfield. The objective of the project is to deploy the system at the Scaled Wind Farm Technology (SWiFT) facility to demonstrate the technology in a field...

  8. Reactor Technology Options Study for Near-Term Deployment of GNEP Grid-Appropriate Reactors

    SciTech Connect (OSTI)

    Ingersoll, Daniel T [ORNL; Poore III, Willis P [ORNL

    2007-09-01T23:59:59.000Z

    World energy demand is projected to significantly increase over the coming decades. The International Energy Agency projects that electricity demand will increase 50% by 2015 and double by 2030, with most of the increase coming in developing countries as they experience double-digit rates of economic growth and seek to improve their standards of living. Energy is the necessary driver for human development, and the demand for energy in these countries will be met using whatever production technologies are available. Recognizing this inevitable energy demand and its implications for the United States, the U.S. National Security Strategy has proposed the Global Nuclear Energy Partnership (GNEP) to work with other nations to develop and deploy advanced nuclear recycling and reactor technologies. This initiative will help provide reliable, emission-free energy with less of the waste burden of older technologies and without making available separated plutonium that could be used by rogue states or terrorists for nuclear weapons. These new technologies will make possible a dramatic expansion of safe, clean nuclear energy to help meet the growing global energy demand. In other words, GNEP seeks to create an international regime to support large-scale growth in the worldwide use of nuclear energy without increasing the risk of nuclear weapon proliferation. This global expansion of nuclear power is strategically important to the United States for several reasons, including the following: (1) National security, by reducing the competition and potential for conflict over increasingly scarce fossil energy resources; (2) Economic security, by helping maintain stable prices for nonrenewable resources such as oil, gas, and coal; (3) Environmental security, by replacing or off-setting large-scale burning of greenhouse gas-emitting fuels for electricity production; and (4) Regaining technical leadership, through deployment of innovative U.S. technology-based reactors. Fully meeting the GNEP vision may require the deployment of thousands of reactors during the next century in dozens of countries, many of which are in the developing world where nuclear energy is not used currently. Such a large-scale deployment will have significant implications related to both fuel supply and spent fuel/waste management, both domestically and worldwide. Consequently, GNEP must address the development and demonstration of proliferation-resistant technologies to ensure both a safe and sustainable nuclear fuel cycle, and reactor designs that are appropriate for the range of needs across the global community. The focus of this report is the latter need, that is, the development and demonstration of proliferation-resistant reactors that are well matched to the needs and capabilities of developing countries.

  9. Review of Inflatable Booms for Deployable Space Structures: Packing and Rigidization

    E-Print Network [OSTI]

    Schenk, Mark; Viquerat, Andrew D.; Seffen, Keith A.; Guest, Simon D.

    2014-04-21T23:59:59.000Z

    ]. The advantages of UV driven rigidization include long storage life, low outgassing and a wide variety of possible deployed shapes. Using solar radiation for curing allows for the possibility of a purely passive rigidization process, while the use of lamps allows... (a) (b) Fig. 14 Rigidization of UV-cured resins using (a) solar radiation (image from Allred et al. [83]), and (b) a string of curing lamps (image from Mahias et al. [85]). the inflation gas can also prevent critical wavelengths from reaching...

  10. Strategies for the Commercialization and Deployment of Greenhouse Gas Intensity-Reducing Technologies and Practices

    SciTech Connect (OSTI)

    Committee on Climate Change Science and Technology Integration (CCCSTI)

    2009-01-01T23:59:59.000Z

    New technologies will be a critical component--perhaps the critical component--of our efforts to tackle the related challenges of energy security, climate change, and air pollution, all the while maintaining a strong economy. But just developing new technologies is not enough. Our ability to accelerate the market penetration of clean energy, enabling, and other climate-related technologies will have a determining impact on our ability to slow, stop, and reverse the growth in greenhouse gas (GHG) emissions. Title XVI, Subtitle A, of the Energy Policy Act of 2005 (EPAct 2005) directs the Administration to report on its strategy to promote the commercialization and deployment (C&D) of GHG intensity-reducing technologies and practices. The Act also requests the Administration to prepare an inventory of climate-friendly technologies suitable for deployment and to identify the barriers and commercial risks facing advanced technologies. Because these issues are related, they are integrated here within a single report that we, representing the Committee on Climate Change Science and Technology Integration (CCCSTI), are pleased to provide the President, the Congress, and the public. Over the past eight years, the Administration of President George W. Bush has pursued a series of policies and measures aimed at encouraging the development and deployment of advanced technologies to reduce GHG emissions. This report highlights these policies and measures, discusses the barriers to each, and integrates them within a larger body of other extant policy. Taken together, more than 300 policies and measures described in this document may be viewed in conjunction with the U.S. Climate Change Technology Program's (CCTP's) Strategic Plan, published in September 2006, which focuses primarily on the role of advanced technology and associated research and development (R&D) for mitigating GHG emissions. The CCTP, a multi-agency technology planning and coordination program, initiated by President Bush, and subsequently authorized in EPAct2005, is responsible for preparing this report on behalf CCCSTI. This report systematically examines the market readiness of key technologies important to meeting climate change mitigation goals. It assesses the barriers and business risks impeding their progress and greater market application. Importantly, by documenting the hundreds of Federal policies, programs, regulations, incentives, and other activities that are in effect and operating today to address these barriers, it provides a broad context for evaluating the adequacy of current policy and the potential need, if any, for additional measures that might be undertaken by government or industry. Finally, it draws conclusions about the current situation, identifies gaps and opportunities, and suggests analytical principles that should be applied to assess and formulate policies and measures to accelerate the commercialization and deployment of these technologies.

  11. India Solar Resource Data: Enhanced Data for Accelerated Deployment (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-08-01T23:59:59.000Z

    Identifying potential locations for solar photovoltaic (PV) and concentrating solar power (CSP) projects requires an understanding of the underlying solar resource. Under a bilateral partnership between the United States and India - the U.S.-India Energy Dialogue - the National Renewable Energy Laboratory has updated Indian solar data and maps using data provided by the Ministry of New and Renewable Energy (MNRE) and the National Institute for Solar Energy (NISE). This fact sheet overviews the updated maps and data, which help identify high-quality solar energy projects. This can help accelerate the deployment of solar energy in India.

  12. Guidance for Deployment of Mobile Technologies for Nuclear Power Plant Field Workers

    SciTech Connect (OSTI)

    Heather D. Medema; Ronald K. Farris

    2012-09-01T23:59:59.000Z

    This report is a guidance document prepared for the benefit of commercial nuclear power plants’ (NPPs) supporting organizations and personnel who are considering or undertaking deployment of mobile technology for the purpose of improving human performance and plant status control (PSC) for field workers in an NPP setting. This document especially is directed at NPP business managers, Electric Power Research Institute, Institute of Nuclear Power Operations, and other non-Information Technology personnel. This information is not intended to replace basic project management practices or reiterate these processes, but is to support decision-making, planning, and preparation of a business case.

  13. ARM - Field Campaign - Colorado: SP2 Deployment at StormVEx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032)8LigovCampaignsCLEX-5 CampaignSP2 Deployment at StormVEx ARM Data

  14. ARM - News from the Hyytiälä, Finland, Deployment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheat fluxChinaNews : AMF Deployment,MediaFinlandNews

  15. Coastal Ohio Wind Project for Reduced Barriers to Deployment of Offshore Wind Energy

    SciTech Connect (OSTI)

    Gorsevski, Peter; Afjeh, Abdollah; Jamali, Mohsin; Carroll, Michael

    2014-04-09T23:59:59.000Z

    The Coastal Ohio Wind Project was created to establish the viability of wind turbines on the coastal and offshore regions of Northern Ohio. The project’s main goal was to improve operational unit strategies used for environmental impact assessment of offshore turbines on lake wildlife by optimizing and fusing data from the multi-instrument surveillance system and providing an engineering analysis of potential design/operational alternatives for offshore wind turbines. The project also developed a general economic model for offshore WTG deployment to quantify potential revenue losses due to wind turbine shutdown related to ice and avian issues. In a previous phase of this project (Award Number: DE-FG36-06GO86096), we developed a surveillance system that was used to collect different parameters such as passage rates, flight paths, flight directions, and flight altitudes of nocturnal migrating species, movements of birds and bats, and bird calls for assessing patterns and peak passage rates during migration. To derive such parameters we used thermal IR imaging cameras, acoustic recorders, and marine radar Furuno (XANK250), which was coupled with a XIR3000B digitizing card from Russell Technologies and open source radR processing software. The integration yielded a development of different computational techniques and methods, which we further developed and optimized as a combined surveillance system. To accomplish this task we implemented marine radar calibration, optimization of processing parameters, and fusion of the multi-sensor data in order to make inferences about the potential avian targets. The main goal of the data fusion from the multi-sensor environment was aimed at reduction of uncertainties while providing acceptable confidence levels with detailed information about the migration patterns. Another component comprised of an assessment of wind resources in a near lake environment and an investigation of the effectiveness of ice coating materials to mitigate adverse effects of ice formation on wind turbine structures. Firstly, a Zephir LiDAR system was acquired and installed at Woodlands School in Huron, Ohio, which is located near Lake Erie. Wind resource data were obtained at ten measurement heights, 200m, 150m, 100m, 80m, 60m, 40m, 38m, 30m, 20m, and 10m. The Woodlands School’s wind turbine anemometer also measured the wind speed at the hub height. These data were collected for approximately one year. The hub anemometer data correlated well with the LiDAR wind speed measurements at the same height. The data also showed that on several days different power levels were recorded by the turbine at the same wind speed as indicated by the hub anemometer. The corresponding LiDAR data showed that this difference can be attributed to variability in the wind over the turbine rotor swept area, which the hub anemometer could not detect. The observation suggests that single point hub wind velocity measurements are inadequate to accurately estimate the power generated by a turbine at all times since the hub wind speed is not a good indicator of the wind speed over the turbine rotor swept area when winds are changing rapidly. To assess the effectiveness of ice coatings to mitigate the impact of ice on turbine structures, a closed-loop icing research tunnel (IRT) was designed and constructed. By controlling the temperature, air speed, water content and liquid droplet size, the tunnel enabled consistent and repeatable ice accretion under a variety of conditions with temperatures between approximately 0°C and -20°C and wind speeds up to 40 miles per hour in the tunnel’s test section. The tunnel’s cooling unit maintained the tunnel temperature within ±0.2°C. The coatings evaluated in the study were Boyd Coatings Research Company’s CRC6040R3, MicroPhase Coatings Inc.’s PhaseBreak TP, ESL and Flex coatings. Similar overall performance was observed in all coatings tested in that water droplets form on the test articles beginning at the stagnation region and spreading in the downstream direction in time. When compari

  16. Deploying perfSONAR-based End-2-End monitoring for production US CMS networking

    SciTech Connect (OSTI)

    Grigoriev, Maxim; Bobyshev, Andrey; Crawford, Matt; DeMar, Phil; Grigaliunas, Vyto; Petravick, Don; /Fermilab

    2007-09-01T23:59:59.000Z

    Fermilab is the US Tier-1 Center for CMS data storage and analysis. End-2-End (E2E) circuits are utilized to support high impact data movement into and out of the Tier-1 Center. E2E circuits have been implemented to facilitate the movement of raw experiment data from the Tier-0 Center at CERN, as well as processed data to a number of the US Tier-2 sites. Troubleshooting and monitoring of those circuits presents a significant challenge, since the circuits typically cross multiple research & education networks, each with its own management domain and customized monitoring capabilities. The perfSONAR Monitoring Project was established to facilitate development and deployment of a common monitoring infrastructure across multiple network management domains. Fermilab has deployed perfSONAR across its E2E circuit infrastructure and enhanced the product with several tools that ease the monitoring and management of those circuits. This paper will present the current state of perfSONAR monitoring at Fermilab and detail our experiences using perfSONAR to manage our current E2E circuit infrastructure. We will describe how production network circuits are monitored by perfSONAR E2E Monitoring Points (MPs), and the benefits it has brought to production US CMS networking support.

  17. Characterization of oil and gas reservoirs and recovery technology deployment on Texas State Lands

    SciTech Connect (OSTI)

    Tyler, R.; Major, R.P.; Holtz, M.H. [Univ. of Texas, Austin, TX (United States)] [and others

    1997-08-01T23:59:59.000Z

    Texas State Lands oil and gas resources are estimated at 1.6 BSTB of remaining mobile oil, 2.1 BSTB, or residual oil, and nearly 10 Tcf of remaining gas. An integrated, detailed geologic and engineering characterization of Texas State Lands has created quantitative descriptions of the oil and gas reservoirs, resulting in delineation of untapped, bypassed compartments and zones of remaining oil and gas. On Texas State Lands, the knowledge gained from such interpretative, quantitative reservoir descriptions has been the basis for designing optimized recovery strategies, including well deepening, recompletions, workovers, targeted infill drilling, injection profile modification, and waterflood optimization. The State of Texas Advanced Resource Recovery program is currently evaluating oil and gas fields along the Gulf Coast (South Copano Bay and Umbrella Point fields) and in the Permian Basin (Keystone East, Ozona, Geraldine Ford and Ford West fields). The program is grounded in advanced reservoir characterization techniques that define the residence of unrecovered oil and gas remaining in select State Land reservoirs. Integral to the program is collaboration with operators in order to deploy advanced reservoir exploitation and management plans. These plans are made on the basis of a thorough understanding of internal reservoir architecture and its controls on remaining oil and gas distribution. Continued accurate, detailed Texas State Lands reservoir description and characterization will ensure deployment of the most current and economically viable recovery technologies and strategies available.

  18. Demonstrating and Deploying Private Sector Technologies at DOE Sites - Issues to be Overcome

    SciTech Connect (OSTI)

    Bedick, R. C.

    2002-02-27T23:59:59.000Z

    The Department of Energy (DOE), Office of Environmental Management (EM) continues to pursue cost-effective, environmental cleanup of the weapons complex sites with a concomitant emphasis on deployment of innovative technologies as a means to this end. The EM Office of Science and Technology (OST) pursues a strategy that entails identification of technologies that have potential applications throughout the DOE complex: at multiple DOE sites and at multiple facilities on those sites. It further encourages a competitive procurement process for the various applications entailed in the remediation of a given facility. These strategies require a competitive private-sector supplier base to help meet EM needs. OST supports technology development and deployment through investments in partnerships with private industry to enhance the acceptance of their technology products within the DOE market. Since 1992, OST and the National Energy Technology Laboratory (NETL) have supported the re search and development of technology products and services offered by the private sector. During this time, NETL has managed over 140 research and development projects involving industrial and university partners. These projects involve research in a broad range of EM related topics, including deactivation and decommissioning, characterization, monitoring, sensors, waste separation, groundwater remediation, robotics, and mixed waste treatment. Successful partnerships between DOE and Industry have resulted in viable options for EM's cleanup needs, and require continued marketing efforts to ensure that these technology solutions are used at multiple DOE sites and facilities.

  19. A utility perspective on the deployment of CCTs into the next millennium

    SciTech Connect (OSTI)

    Mudd, M.J. [AEP Energy Services, Columbus, OH (United States)

    1997-12-31T23:59:59.000Z

    The successful Clean Coal Technology projects which are being discussed in this conference are all a testament to the positive advancements that can be made with environmentally superior technologies when the government and industry cooperate in the context of a properly funded and a well thought-out program. Many of the technologies developed in the Clean Coal Technology Program have taken a competitive position in the marketplace, and many others are on the verge of being competitive in the marketplace. Based on the success of the Clean Coal Technology Program, one would expect that they would be ready for full deployment in the marketplace with the approach of the next millennium. This is not happening. There are several hurdles that impede their deployment. Some of those hurdles, such as the higher first-of-a-kind cost and technology risk factors that accompany not-yet mature technologies, have existed since the initiation of the Clean Coal Technology Program. However, several new hurdles are impeding the market penetration of Clean Coal Technologies. Those hurdles include the radically different marketplace due to the restructuring of the electric utility industry, a soft market, the difficulty in financing new power plants, low natural gas prices, and lower-cost and higher-efficiency natural gas combined cycle technology.

  20. Advances Towards Readily Deployable Antineutrino Detectors for Reactor Monitoring and Safeguards

    SciTech Connect (OSTI)

    Bowden, N S; Bernstein, A; Dazeley, S; Lund, J; Reyna, D; Sadler, L; Svoboda, R

    2008-06-05T23:59:59.000Z

    Nuclear reactors have served as the neutrino source for many fundamental physics experiments. The techniques developed by these experiments make it possible to use these very weakly interacting particles for a practical purpose. The large flux of antineutrinos that leaves a reactor carries information about two quantities of interest for safeguards: the reactor power and fissile inventory. Our LLNL/SNL collaboration has demonstrated that such antineutrino based monitoring is feasible using a relatively small cubic meter scale detector at tens of meters standoff from a commercial PWR. With little or no burden on the plant operator we have been able to remotely and automatically monitor the reactor operational status (on/off), power level, and fuel burnup. Recently, we have investigated several technology paths that could allow such devices to be more readily deployed in the field. In particular, we have developed and fielded two new detectors; a low cost, non- flammable water based design; and a robust solid-state design based upon plastic scintillator. Here we will describe the tradeoffs inherent in these designs, and present results from their field deployments.