Sample records for demonstration case study

  1. 6.8 Cylinder Liner Boring Case Study Demonstrating the Process of SPC The following case study demonstrates the application of X and R control charts to the study of

    E-Print Network [OSTI]

    Di Bucchianico, Alessandro

    6.8 Cylinder Liner Boring Case Study ­ Demonstrating the Process of SPC The following case study the complete process of SPC to bring a process into a state of statistical control. The Situation As part

  2. A case study for demonstrating the application of U.S. EPA's monitored natural attenuation

    E-Print Network [OSTI]

    Clement, Prabhakar

    screening protocol at a hazardous waste site T. Prabhakar Clement a,*, Michael J. Truex b , Peter Lee c, various types of hazardous waste material were disposed at the site. The material included dense in Louisiana, USA, are presented. The study site is contaminated with large quantities of DNAPL waste products

  3. Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Case Studies Case Studies The following case studies will be included in the HEP report. Final case studies are due January 7, 2013. Lattice Gauge Theories - Lead: Doug Toussaint...

  4. Case Studies

    Broader source: Energy.gov [DOE]

    The following case studies are examples of integrating renewable energy into Federal new construction and major renovation projects. Additional renewable energy case studies are also available.

  5. Light Water Reactor Sustainability Program Risk Informed Safety Margin Characterization (RISMC) Advanced Test Reactor Demonstration Case Study

    SciTech Connect (OSTI)

    Curtis Smith; David Schwieder; Cherie Phelan; Anh Bui; Paul Bayless

    2012-08-01T23:59:59.000Z

    Safety is central to the design, licensing, operation, and economics of Nuclear Power Plants (NPPs). Consequently, the ability to better characterize and quantify safety margin holds the key to improved decision making about LWR design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margins management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. The purpose of the RISMC Pathway R&D is to support plant decisions for risk-informed margins management with the aim to improve economics, reliability, and sustain safety of current NPPs. Goals of the RISMC Pathway are twofold: (1) Develop and demonstrate a risk-assessment method coupled to safety margin quantification that can be used by NPP decision makers as part of their margin recovery strategies. (2) Create an advanced “RISMC toolkit” that enables more accurate representation of NPP safety margin. This report describes the RISMC methodology demonstration where the Advanced Test Reactor (ATR) was used as a test-bed for purposes of determining safety margins. As part of the demonstration, we describe how both the thermal-hydraulics and probabilistic safety calculations are integrated and used to quantify margin management strategies.

  6. Case Study

    Office of Environmental Management (EM)

    Case Study M2M Smart Grid Investment Grant 1 An irrigation pump connected to a web---to---wireless controller designed by M2M Communications. Agricultural Demand Response Program...

  7. Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess StoriesFebruary 26,ComputersTrinitytheOptimizationCase Studies

  8. Case Study

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. Department ofJuneWaste To Wisdom:EnergyJoshua DeLung What does thisCase

  9. NP Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HPC Requirements Reviews Requirements Reviews: Target 2014 Nuclear Physics (NP) Case Studies Case Studies The core of the NERSC requirements workshops are the case...

  10. Project Finance Case Studies

    Broader source: Energy.gov [DOE]

    Presentation covers the Project Finance Case Studies and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Rapid City, South Dakota.

  11. Geothermal Case Studies

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Young, Katherine

    database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  12. Geothermal Case Studies

    SciTech Connect (OSTI)

    Young, Katherine

    2014-09-30T23:59:59.000Z

    The US Geological Survey (USGS) resource assessment (Williams et al., 2009) outlined a mean 30GWe of undiscovered hydrothermal resource in the western US. One goal of the Geothermal Technologies Office (GTO) is to accelerate the development of this undiscovered resource. The Geothermal Technologies Program (GTP) Blue Ribbon Panel (GTO, 2011) recommended that DOE focus efforts on helping industry identify hidden geothermal resources to increase geothermal capacity in the near term. Increased exploration activity will produce more prospects, more discoveries, and more readily developable resources. Detailed exploration case studies akin to those found in oil and gas (e.g. Beaumont, et al, 1990) will give operators a single point of information to gather clean, unbiased information on which to build geothermal drilling prospects. To support this effort, the National Renewable Energy laboratory (NREL) has been working with the Department of Energy (DOE) to develop a template for geothermal case studies on the Geothermal Gateway on OpenEI. In fiscal year 2013, the template was developed and tested with two case studies: Raft River Geothermal Area (http://en.openei.org/wiki/Raft_River_Geothermal_Area) and Coso Geothermal Area (http://en.openei.org/wiki/Coso_Geothermal_Area). In fiscal year 2014, ten additional case studies were completed, and additional features were added to the template to allow for more data and the direct citations of data. The template allows for: Data - a variety of data can be collected for each area, including power production information, well field information, geologic information, reservoir information, and geochemistry information. Narratives ? general (e.g. area overview, history and infrastructure), technical (e.g. exploration history, well field description, R&D activities) and geologic narratives (e.g. area geology, hydrothermal system, heat source, geochemistry.) Exploration Activity Catalog - catalog of exploration activities conducted in the area (with dates and references.) NEPA Analysis ? a query of NEPA analyses conducted in the area (that have been catalogued in the OpenEI NEPA database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  13. Science DMZ Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebook Twitter Principalfuel cells" Find Science DMZ Case Studies

  14. A Case for Climate Neutrality: Case Studies on Moving Towards...

    Open Energy Info (EERE)

    for Climate Neutrality: Case Studies on Moving Towards a Low Carbon Economy Jump to: navigation, search Tool Summary LAUNCH TOOL Name: A Case for Climate Neutrality: Case Studies...

  15. Precision Information Environment (PIE) for International Safeguards: Pre-Demonstration Development Use Cases

    SciTech Connect (OSTI)

    Gastelum, Zoe N.; Henry, Michael J.

    2013-11-13T23:59:59.000Z

    In FY2013, the PIE International Safeguards team demonstrated our development progress to U.S. Department of Energy (DOE) staff from the Office of Nonproliferation and International Security (NA-24, our client) and the Office of Defense Nuclear Nonproliferation Research and Development (NA-22). Following the demonstration, the team was asked by our client to complete additional development prior to a planned demonstration at the International Atomic Energy Agency (IAEA), scheduled tentatively for January or spring of 2014. The team discussed four potential areas for development (in priority order), and will develop them as time and funding permit prior to an IAEA demonstration. The four capability areas are: 1. Addition of equipment manuals to PIE-accessible files 2. Optical character recognition (OCR) of photographed text 3. Barcode reader with information look-up from a database 4. Add Facilities to Data Model 5. Geospatial capabilities with information integration Each area will be described below in a use case.

  16. Curriculum Integration Case Studies 1 Moving Beyond Marketing Study Abroad: Comparative Case Studies of the

    E-Print Network [OSTI]

    Amin, S. Massoud

    Curriculum Integration Case Studies 1 Moving Beyond Marketing Study Abroad: Comparative Case Integration Case Studies 2 Contents Acknowledgements....................................................................16 5.) Case Study #1 (University of Minnesota, 2006): Oregon State University 1a.) Impetus & Goals

  17. CaseStudyTemplate

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z C o . C lKieling , ActingOrficePENNELCNGPropaneCase.

  18. Water Efficiency Case Studies | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Efficiency Water Efficiency Case Studies Water Efficiency Case Studies These case studies feature examples of water-efficiency projects implemented by Federal agencies. They are...

  19. Renewable Energy Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case Studies Renewable Energy Case Studies These case studies and feature examples of renewable energy projects at Federal facilities. Mobile Photovoltaic System at Bechler Meadows...

  20. Better Buildings Residential Network Case Study: Partnerships...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Network Case Study: Partnerships Better Buildings Residential Network Case Study: Partnerships Better Buildings Residential Network Case Study: Partnerships, from the U.S....

  1. Case Study: Transcritical Carbon Dioxide Supermarket Refrigeration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case Study: Transcritical Carbon Dioxide Supermarket Refrigeration Systems Case Study: Transcritical Carbon Dioxide Supermarket Refrigeration Systems This case study documents one...

  2. Oncor DLR case study

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked QuestionsDepartmentGas and Oil ResearchEnergyOn October 18th, theHydrogen Study:

  3. A semantic study of German and Chinese demonstratives

    E-Print Network [OSTI]

    Lin, Lin

    2013-01-01T23:59:59.000Z

    Gorup, R. (2002). Serbo-Croatian deixis: Balancing attentiona meaning. In work on Serbo-Croatian and Spanish pronouns,meaning to the Serbo-Croatian demonstrative se, which

  4. FAQ for Case Study Authors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Review 2015 ASCR Requirements Review 2015 Previous Reviews Requirements Review Reports Case Studies Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638...

  5. Case Study: Goose Creek CISD 

    E-Print Network [OSTI]

    White, D.

    2014-01-01T23:59:59.000Z

    GOOSE CREEK CISD FINANCIALS • $4,866,124 project • $600k annual savings • 5,954,383 kWh annual savings IMPROVEMENTS • Lighting and water efficiency, computer power management, HVAC, controls redesign case study McKinstry first worked with Goose... • $693,866 project • $87k annual savings • 682,228 kWh annual savings IMPROVEMENTS • HVAC, lighting and water efficiency, computer power management case study Lake Dallas ISD was interested in improving the energy efficiency and aging infrastructure...

  6. Feasibility study for a demonstration plant for liquefaction and coprocessing of waste plastics and tires

    SciTech Connect (OSTI)

    Huffman, G.P.; Shah, N. [Univ. of Kentucky, Lexington, KY (United States); Shelley, M. [Auburn Univ., AL (United States)] [and others

    1998-04-01T23:59:59.000Z

    The results of a feasibility study for a demonstration plant for the liquefaction of waste polymers and the coprocessing of waste polymers with coal are presented. The study was carried out by a committee of participants from five universities, the US DOE Federal Energy Technology Center, and Burns & Roe Corporation. The study included an assessment of current recycling practices, a review of pertinent research, and a survey of feedstock availability. A conceptual design for a demonstration plant was developed and a preliminary economic analysis for various feedstock mixes was carried out. The base case for feedstock scenarios was chosen to be 200 tons per day of waste plastic and 100 tons per day of waste tires. For this base case, the return on investment (ROI) was found to range from 8% to 16% as tipping fees for waste plastic and tires increased over a range comparable to that existing in the US. A number of additional feedstock scenarios that were both more and less profitable were also considered and are briefly discussed.

  7. Case Study: Goose Creek CISD

    E-Print Network [OSTI]

    White, D.

    2014-01-01T23:59:59.000Z

    GOOSE CREEK CISD FINANCIALS • $4,866,124 project • $600k annual savings • 5,954,383 kWh annual savings IMPROVEMENTS • Lighting and water efficiency, computer power management, HVAC, controls redesign case study McKinstry first worked with Goose... Creek CISD performing retro-commissioning through the Centerpoint/Nexant RCx rebate program. McKinstry found additional projects with good returns on investment, warranting a performance contract. Working with the district to apply for the State...

  8. Climate Change Mitigation: Case Studies from Russia

    E-Print Network [OSTI]

    October Climate Change; Sergei Avdiushin; Inna Gritsevich; Susan Legro (editor; Alexander Kolesov; Svetlana Sorokina; William U. Chandler

    Metallurguichesky District of Chelyabinsk Background 3 Approach 4 Project Evaluation 6 Case Study 2: An Industrial

  9. The case for using weight-of-evidence demonstrations in state implementation planning

    SciTech Connect (OSTI)

    Michael Koerber; Donna Kenski [Lake Michigan Air Directors Consortium in Des Plaines, IL (US)

    2005-04-01T23:59:59.000Z

    In an effort to move beyond the current approach of relying heavily on modeling for air quality analyses, the Clean Air Act Advisory Committee's Air Quality Management Workgroup recently recommended that 'weight-of-evidence' demonstrations be used for state implementation planning purposes. This article discusses the workgroup's recommendation and illustrates how such demonstrations can be used to provide comprehensive air quality assessments. 11 refs., 1 tab.

  10. Case Study No. 1: Alvarado Street Bakery

    E-Print Network [OSTI]

    Thistlethwaite, Rebecca; Brown, Martha

    2010-01-01T23:59:59.000Z

    bread, they The Innovative Business Models Case Study Seriest find in any C-Corp business model. Alvarado Street Bakery’on the Innovative Business Models Case Study Series, please

  11. NWCC Transmission Case Study III

    SciTech Connect (OSTI)

    Terry Allison, Steve Wiese

    2000-03-01T23:59:59.000Z

    OAK-B135 Transmission System Improvements for Wind Energy Development in the Upper Midwest and Great Plains: Opportunities and Obstacles. This case study set out to ascertain the validity of three assumptions from the perspectives of stakeholders involved in wind energy and transmission issues in the Upper Midwest and Great Plains. The assumptions, and the stakeholders' reactions to each, are summarized below: Assumption 1--Transmission system improvements would provide significant benefits to the electricity network and its customers. Respondents acknowledge the potential for overall system benefits in the form of reduced line losses, improved grid stability and reliability, and enhanced ability to conduct spot market transactions. They also agree that these benefits relate to specific regional needs. However, there is disagreement over the extent of other benefits such as efficiency gains and cost savings from reduced line losses. Further, environmental and community interest groups point out that none of these benefits are realized without significant financial, environmental and social costs. Assumption 2--The benefits of transmission improvements would be helpful, but not confined, to wind power. All respondents agree that wind energy could benefit from transmission system improvements. But they also acknowledge, reluctantly, in the case of environmental stakeholders, that the benefits of an improved transmission system cannot be limited to environmentally preferable forms of generation. Some environmental and community advocate respondents also feel that transmission system improvement projects can be avoided altogether through energy conservation and efficiency measures, and by substituting wind energy for fossil generation. Assumption 3--Transmission alliances among stakeholders within and external to the wind community can provide benefits in the public interest. The fractured, multi-jurisdictional governance of the regional transmission system, and the distrust and diversity of perspectives among affected stakeholders, may make the formation of multi-stakeholder alliances necessary to accomplishing transmission goals. If the wind industry and utilities want to partner with environmental and community advocate groups in supporting a transmission project, they may have to convince these groups that the project would result in a net environmental benefit. The project proponents would have to make the case that the benefits of the additional wind energy will at least offset the emissions of any additional fossil generation made possible by the transmission project, as well as offset the environmental impact of the transmission project itself.

  12. Hydrogen Production: Fundamentals and Case Study Summaries (Presentation)

    SciTech Connect (OSTI)

    Harrison, K.; Remick, R.; Hoskin, A.; Martin, G.

    2010-05-19T23:59:59.000Z

    This presentation summarizes hydrogen production fundamentals and case studies, including hydrogen to wind case studies.

  13. Case Study: Youth Perceptions of Citizenship

    E-Print Network [OSTI]

    Bryant, Marie Jolliff

    2012-10-19T23:59:59.000Z

    CASE STUDY: YOUTH PERCEPTIONS OF CITIZENSHIP A Thesis by MARIE JOLLIFF BRYANT Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... August 2011 Major Subject: Recreation, Park, and Tourism Sciences Case Study: Youth Perceptions of Citizenship Copyright 2011 Marie Jolliff Bryant CASE STUDY: YOUTH PERCEPTIONS OF CITIZENSHIP A...

  14. MARS15 study of the Energy Production Demonstrator Model for Megawatt

    E-Print Network [OSTI]

    McDonald, Kirk

    MARS15 study of the Energy Production Demonstrator Model for Megawatt proton beams in the 0.5 ­ 120 Targetry Workshop HPT5, Fermilab #12;Energy Production Demonstrator MARS15 Model · Solid targets · R= 60 cm · Energy Production/Materials Testing · LAQGSM/CEM generators were usedU-nat, 3 GeV, Energy deposition, Ge

  15. MDU Solar Energy Project Case Study

    Broader source: Energy.gov [DOE]

    Presentation covers the MDU Solar Energy Project Case Study and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Rapid City, South Dakota.

  16. Sustainable Development: Case Studies & Lessons Learned

    E-Print Network [OSTI]

    Netoff, Theoden

    Sustainable Development: Case Studies & Lessons Learned Prepared For City of Rosemount UMore Development LLC PA 8081 Capstone: Sustainability Planning Humphrey School of Public Affairs University studies that analyze how local and national developments have either successfully implemented sustainable

  17. Five case studies of multifamily weatherization programs

    SciTech Connect (OSTI)

    Kinney, L; Wilson, T.; Lewis, G. [Synertech Systems Corp. (United States)] [Synertech Systems Corp. (United States); MacDonald, M. [Oak Ridge National Lab., TN (United States)] [Oak Ridge National Lab., TN (United States)

    1997-12-31T23:59:59.000Z

    The multifamily case studies that are the subject of this report were conducted to provide a better understanding of the approach taken by program operators in weatherizing large buildings. Because of significant variations in building construction and energy systems across the country, five states were selected based on their high level of multifamily weatherization. This report summarizes findings from case studies conducted by multifamily weatherization operations in five cities. The case studies were conducted between January and November 1994. Each of the case studies involved extensive interviews with the staff of weatherization subgrantees conducting multifamily weatherization, the inspection of 4 to 12 buildings weatherized between 1991 and 1993, and the analysis of savings and costs. The case studies focused on innovative techniques which appear to work well.

  18. Learning From Case Studies: A Case Study of Lean Transformation at Rockwell Collins

    E-Print Network [OSTI]

    Roth, George

    2009-01-21T23:59:59.000Z

    Case studies are one of LAI's methods for engaging with sponsors in conducting research. Case studies involve interacting with people in examining, describing, analyzing, and documenting significant events, their ...

  19. High Penetration Photovoltaic Case Study Report

    SciTech Connect (OSTI)

    Bank, J.; Mather, B.; Keller, J.; Coddington, M.

    2013-01-01T23:59:59.000Z

    Technical concerns with integrating higher penetrations of photovoltaic (PV) systems include grid stability, voltage regulation, power quality (voltage rise, sags, flicker, and frequency fluctuations), and protection and coordination. The current utility grid was designed to accommodate power flows from the central generation source to the transmission system and eventually to the distribution feeders. At the distribution level, the system was designed to carry power from the substation toward the load. Renewable distributed generation, particularly solar PV, provides power at the distribution level challenging this classical paradigm. As these resources become more commonplace the nature of the distribution network and its operation is changing to handle power flow in both directions. This report is focused on large PV installations in which penetration is significantly greater than 15% of maximum daytime feeder load. These case studies are intended to demonstrate success stories with integration of large PV plants at the distribution level as well as some of the solutions used by the utility to ensure safe, reliable operation of both the PV system and the distribution network.

  20. Novel Magnetic Hydrogen Sensing: A Case Study Using Antiferromagnetic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magnetic Hydrogen Sensing: A Case Study Using Antiferromagnetic Hematite Nanoparticles. Novel Magnetic Hydrogen Sensing: A Case Study Using Antiferromagnetic Hematite...

  1. A design study for a medium-scale field demonstration of the viscous barrier technology

    SciTech Connect (OSTI)

    Moridis, G. [Lawrence Berkeley National Lab., CA (United States); Yen, P. [Bechtel Corp., San Francisco, CA (United States); Persoff, P.; Finsterle, S.; Williams, P.; Myer, L.; Pruess, K. [Lawrence Berkeley National Lab., CA (United States)

    1996-09-01T23:59:59.000Z

    This report is the design study for a medium-scale field demonstration of Lawrence Berkeley National Laboratory`s new subsurface containment technology for waste isolation using a new generation of barrier liquids. The test site is located in central California in a quarry owned by the Los Banos Gravel Company in Los Banos, California, in heterogeneous unsaturated deposits of sand, silt, and -ravel typical of many of the and DOE cleanup sites and particularly analogous to the Hanford site. The coals of the field demonstration are (a) to demonstrate the ability to create a continuous subsurface barrier isolating a medium-scale volume (30 ft long by 30 ft wide by 20 ft deep, i.e. 1/10th to 1/8th the size of a buried tank at the Hanford Reservation) in the subsurface, and (b) to demonstrate the continuity, performance, and integrity of the barrier.

  2. FORM FOR ESPC CASE STUDIES AND REFERENCES | Department of Energy

    Office of Environmental Management (EM)

    FORM FOR ESPC CASE STUDIES AND REFERENCES FORM FOR ESPC CASE STUDIES AND REFERENCES Document features a template, sample, and instructions to help Federal agencies develop case...

  3. Community Redevelopment Case Study: Jekyll Island

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—features photos from a case study about Jekyll Island's community redevelopment project in Georgia.

  4. The arc cloud complex: a case study

    E-Print Network [OSTI]

    Miller, Robert Loren

    1984-01-01T23:59:59.000Z

    THE ARC CLOUD COMPLEX: A CASE STUDY A Thesis by ROBERT LOREN MILLER Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE August 1984 Major Subject...: Meteorology THE ARC CLOUD COMPLEX; A CASE STUDY A Thesis by ROBERT LOREN MILLER Approved as to style and content by: Kenneth C. Brundidge (Chairman of Committee) Walter K. Henry (Member) Marshall ~ Mcparland (Member) James R. Scog s (Head...

  5. Demonstration testing and evaluation of in situ soil heating. Treatability study work plan (Revision 2)

    SciTech Connect (OSTI)

    Sresty, G.C.

    1994-12-30T23:59:59.000Z

    A Treatability Study planned for the demonstration of the in situ electromagnetic (EM) heating process to remove organic solvents is described in this Work Plan. The treatability study will be conducted by heating subsurface vadose-zone soils in an organic plume adjacent to the Classified Burial Ground K-1070-D located at K-25 Site, Oak Ridge. The test is scheduled to start during the fourth quarter of FY94 and will be completed during the first quarter of FY95. Over the last nine years, a number of Government agencies (EPA, Army, AF, and DOE) and industries sponsored further development and testing of the in situ heating and soil decontamination process for the remediation of soils containing hazardous organic contaminants. In this process the soil is heated in situ using electrical energy. The contaminants are removed from the soil due to enhanced vaporization, steam distillation and stripping. IITRI will demonstrate the EM Process for in situ soil decontamination at K-25 Site under the proposed treatability study. Most of the contaminants of concern are volatile organics which can be removed by heating the soil to a temperature range of 85{degrees} to 95{degrees}C. The efficiency of the treatment will be determined by comparing the concentration of contaminants in soil samples. Samples will be obtained before and after the demonstration for a measurement of the concentration of contaminants of concern. This document is a Treatability Study Work Plan for the demonstration program. The document contains a description of the proposed treatability study, background of the EM heating process, description of the field equipment, and demonstration test design.

  6. Case study: copyright issues in distance education 

    E-Print Network [OSTI]

    Huddleston, Michael B

    2006-10-30T23:59:59.000Z

    of legal incident. A case study design was chosen because it adds strength to what is known and deepens understanding of complex issues. According to Lincoln and Guba in their 1985 book, qualitative research involves the studied use and collection of a...

  7. Geothermal development of the Madison group aquifer: a case study

    SciTech Connect (OSTI)

    Martinez, J.A.

    1981-01-01T23:59:59.000Z

    A geothermal well has been drilled at the St. Mary's Hospital in Pierre, South Dakota. The well is 2176 feet deep and artesian flows 375 gpm at 106/sup 0/F. The well is producing fluids from the Mississippian Madison Group, a sequence of carbonate rocks deposited over several western states. The project was funded to demonstrate the goethermal potential of this widespread aquifer. This case study describes the development of the project through geology, drilling, stimulation, and testing.

  8. Case histories in the Europe/Africa area demonstrate improved capabilities of fiber-optic video camera technology

    SciTech Connect (OSTI)

    Olsen, J.E.; Kristensen, R.; Taylor, R.W.

    1995-10-01T23:59:59.000Z

    Cost constraints in the oilfield restrict the performance of remedial services unless a high probability of success can be assured. Unfortunately, a method that could accurately diagnose wellbore problems in a broad scope of oilfield environments was not available, and until the 90`s, accuracy of problem assessment was compromised to the point that estimates of remedial success could not be determined. During the 90`s, however, a downhole video system that showed promise of providing the sought-after diagnostic accuracy for today`s operational conditions was introduced to the oilfield. With the combined capabilities of fiber-optic signal transmission and downhole video camera technology, the system can now provide the oil and gas industry with a diagnostic tool that is rapidly becoming invaluable in oilfield services and is proving the worth of the old adage, seeing is believing. This paper will present a brief overview of the use of the downhole video (DHV) camera technique from its first documented usage until early 1992. The enhancements that have been instrumental in enlarging the scope of its usage since that time will then be discussed. Case histories recorded by the video camera operation in the Europe/Africa area will be presented and analyzed to demonstrate usage and benefits of the system.

  9. Smart Energy Case Study Christof Baumann

    E-Print Network [OSTI]

    renewable energy produc- tion, the importance of involving energy-consumers into the process of scheduling consumption to match what is gener- ated from renewable energies like wind or solar needs a way to regulateSmart Energy Case Study Christof Baumann ETH Zurich, Switzerland christof@boumann.ch Stephan Holzer

  10. Case Studies from the UK Richard Green

    E-Print Network [OSTI]

    California at Berkeley. University of

    Case Studies from the UK Richard Green University of Cambridge #12;Topics · Initial market design swap contracts among themselves to restore merit order in actual operation · Unified Energy Pool plus (?) · "Truly Unified Pool" · Single Price with two components ­ Energy ­ Capacity · No free riding #12;Most

  11. Global manufacturing model and case studies 

    E-Print Network [OSTI]

    Kijtawesataporn, Komsun

    2003-01-01T23:59:59.000Z

    of cross-border environments such as cultures, economics and politics. As illustrations of the model, two case studies are composed. First, SmartDrill Company shows the cross-cultural and economic influences on the company plan to establish a green...

  12. IEC 61508 Case Study Peter Bernard Ladkin

    E-Print Network [OSTI]

    Ladkin, Peter B.

    IEC 61508 Case Study Peter Bernard Ladkin RVS White Paper 3 20 February 2013 © Peter Bernard Ladkin involving E/E/PE components using the principles of IEC 61508. The exercises have been commented by others as airworthiness requirements it has to fulfil IEC 61508 requirements, because the overall plant contains E

  13. Tactical Stealth Visby as a Case Study

    E-Print Network [OSTI]

    Tactical Stealth Visby as a Case Study Dr. Philip A. Dur President Northrop Grumman Ship Systems 19 use of Radar Absorbent material (RAM) ­RCS modeling Answering the Challenge Vosper Thornycroft: SeaShock Pressure Turning Emitted Relative Tactical Superiority of RSN Visby Safe Distance Radius Conventional Semi-Stealth

  14. Case Study/ Ground Water Sustainability: Methodology and

    E-Print Network [OSTI]

    Zheng, Chunmiao

    , or the lack thereof, of ground water flow systems driven by similar hydrogeologic and economic conditionsCase Study/ Ground Water Sustainability: Methodology and Application to the North China Plain of a ground water flow system in the North China Plain (NCP) subject to severe overexploitation and rapid

  15. Greenland Meadows LID Case Study: Economics

    E-Print Network [OSTI]

    Greenland Meadows LID Case Study: Economics Utilizing an LID approach that featured porous asphalt and a gravel wetland, a cost-competitive drainage system was designed for a large retail development. Greenland in Greenland, N.H. The development is located on a 56-acre parcel and includes three, one-story retail

  16. Greenland Meadows LID Case Study: Water Quality

    E-Print Network [OSTI]

    Greenland Meadows LID Case Study: Water Quality Greenland Meadows is a retail shopping center built in 2008 by Newton, Mass.- based New England Development in Greenland, N.H. The development is located Development and Community Decisions can be found at http://www.unh.edu/unhsc/ftl/ Greenland Meadows features

  17. Oil To Biofuels Case Study Objectives

    E-Print Network [OSTI]

    Auerbach, Scott M.

    Oil To Biofuels Case Study Objectives - Critically evaluate the nature of certain societal", and the consequences of various sources. - How could this diagram be modified through the use of biofuels? Research. - What are biomass and biofuels? How are they used, what are their benefits and negative consequences

  18. Case Study of Maturing and Reusing

    E-Print Network [OSTI]

    Christensen, Henrik Bćrbak

    Case Study of Maturing and Reusing a Framework COT/3-32-V1.0 C O T * Centre for Object Technology concerned with research, application and implementation of object technology in Danish companies-data, Rambřll, Danfoss, Systematic Software Engineering, Odense Steel Shipyard, A.P. Mřller, University

  19. Case Study #1 "The Global Warming Debate"

    E-Print Network [OSTI]

    Reed, Christopher A.

    CHEM 001A Case Study #1 "The Global Warming Debate" Global warming is one of the most contentious issues of our time. There is an ongoing debate about whether global warming is caused by human activity.S., and because the scientific evidence used to determine if global warming is man-made is so difficult

  20. Building America Webinar: Deep Energy Retrofit Case Studies:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deep Energy Retrofit Case Studies: Lessons Learned Building America Webinar: Deep Energy Retrofit Case Studies: Lessons Learned This presentation by Alea German is included in the...

  1. Laboratories for the 21st Century Case Studies: National Renewable...

    Office of Environmental Management (EM)

    Case Studies: National Renewable Energy Laboratory, Science and Technology Facility Laboratories for the 21st Century Case Studies: National Renewable Energy Laboratory, Science...

  2. DOE Announces Webinars on Tribal Renewable Energy Case Studies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tribal Renewable Energy Case Studies and Energy Efficiency Competitions DOE Announces Webinars on Tribal Renewable Energy Case Studies and Energy Efficiency Competitions October...

  3. Energy Department Releases Case Studies and Best Practices to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Releases Case Studies and Best Practices to Assist Innovative Energy Efficiency Programs Energy Department Releases Case Studies and Best Practices to Assist Innovative Energy...

  4. Federal, Municipal, Universities and Other ESPC Case Studies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal, Municipal, Universities and Other ESPC Case Studies from Different States Federal, Municipal, Universities and Other ESPC Case Studies from Different States Provides a...

  5. General Dynamics and Nissan Case Studies Highlight Benefits of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    General Dynamics and Nissan Case Studies Highlight Benefits of Superior Energy Performance General Dynamics and Nissan Case Studies Highlight Benefits of Superior Energy...

  6. Laboratories for the 21st Century Case Studies

    Broader source: Energy.gov [DOE]

    These case studies feature examples of energy-efficient laboratories for the 21st century. The Featured Concepts Table outlines technologies covered in each case study.

  7. Case Study - The Challenge: Improving Ventilation System Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ventilation System Energy Efficiency in a Textile Plant Case Study - The Challenge: Improving Ventilation System Energy Efficiency in a Textile Plant This case study examines how...

  8. International Collaboration With a Case Study in Assessment of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Collaboration With a Case Study in Assessment of Worlds Supply of Lithium International Collaboration With a Case Study in Assessment of Worlds Supply of Lithium 2009 DOE...

  9. Case Study of Water-Soluble Metal Containing Organic Constituents...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Case Study of Water-Soluble Metal Containing Organic Constituents of Biomass Burning Aerosol. Case Study of Water-Soluble Metal Containing Organic Constituents of Biomass Burning...

  10. DOE Zero Energy Ready Home Case Study: Transformation Inc., Production...

    Energy Savers [EERE]

    Transformation Inc., Production House, Devens, MA DOE Zero Energy Ready Home Case Study: Transformation Inc., Production House, Devens, MA Case study of a DOE Zero Energy Ready...

  11. Case Study No. 6: Straus Family Creamery and Dairy

    E-Print Network [OSTI]

    Thistlethwaite, Rebecca

    2010-01-01T23:59:59.000Z

    cows on two The Innovative Business Models Case Study Seriescreating a sustainable business model and nour- ishing bothon the Innovative Business Models Case Study Series, please

  12. DOE Zero Energy Ready Home Case Study: Weiss Building & Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC., Custom Home, Downers Grove, IL DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC.,...

  13. A study of hazardous air pollutants at the Tidd PFBC Demonstration Plant

    SciTech Connect (OSTI)

    NONE

    1994-10-01T23:59:59.000Z

    The US Department of Energy (DOE) Clean Coal Technology (CCD Program is a joint effort between government and industry to develop a new generation of coal utilization processes. In 1986, the Ohio Power Company, a subsidiary of American Electric Power (AEP), was awarded cofunding through the CCT program for the Tidd Pressure Fluidized Bed Combustor (PFBC) Demonstration Plant located in Brilliant, Ohio. The Tidd PFBC unit began operation in 1990 and was later selected as a test site for an advanced particle filtration (APF) system designed for hot gas particulate removal. The APF system was sponsored by the DOE Morgantown Energy Technology Center (METC) through their Hot Gas Cleanup Research and Development Program. A complementary goal of the DOE CCT and METC R&D programs has always been to demonstrate the environmental acceptability of these emerging technologies. The Clean Air Act Amendments of 1990 (CAAA) have focused that commitment toward evaluating the fate of hazardous air pollutants (HAPs) associated with advanced coal-based and hot gas cleanup technologies. Radian Corporation was contacted by AEP to perform this assessment of HAPs at the Tidd PFBC demonstration plant. The objective of this study is to assess the major input, process, and emission streams at Plant Tidd for the HAPs identified in Title III of the CAAA. Four flue gas stream locations were tested: ESP inlet, ESP outlet, APF inlet, and APF outlet. Other process streams sampled were raw coal, coal paste, sorbent, bed ash, cyclone ash, individual ESP hopper ash, APF ash, and service water. Samples were analyzed for trace elements, minor and major elements, anions, volatile organic compounds, dioxin/furan compounds, ammonia, cyanide, formaldehyde, and semivolatile organic compounds. The particle size distribution in the ESP inlet and outlet gas streams and collected ash from individual ESP hoppers was also determined.

  14. CASE STUDY 95-04: Operator Certification: A Case Study in Operator Self-Inspection

    E-Print Network [OSTI]

    Cowap, Stacey

    1996-02-22T23:59:59.000Z

    Operator certification is the process where production workers are trained, authorized, and given the necessary resources to inspect their own work. This case study evaluated operator certification systems in the manufacturing ...

  15. Bioremediation demonstration on Kwajalein Island: Site characterization and on-site biotreatability studies

    SciTech Connect (OSTI)

    Siegrist, R.L.; Korte, N.E.; Pickering, D.A. (Oak Ridge National Lab., TN (United States)); Phelps, T.J. (Tennessee Univ., Knoxville, TN (United States))

    1991-09-01T23:59:59.000Z

    An environmental study was conducted during February 1991 on Kwajalein Island, a US Army Kwajalein Atoll (USAKA) Base in the Republic of the Marshall Islands (RMI). This study was undertaken for the US Department of Energy (DOE) Hazardous Waste Remedial Actions Program (HAZWRAP) acting in behalf of USAKA. The purpose of the study was to determine if selected locations for new construction on Kwajalein Island were contaminated by petroleum hydrocarbons as suspected and, if so, whether bioremediation appeared to be a feasible technology for environmental restoration. Two different sites were evaluated: (1) the site planned freshwater production facility and (2) a site adjacent to an aboveground diesel fuel storage tank. Within the proposed construction zone for the freshwater production facility (a.k.a desalination plant), total petroleum hydrocarbons (TPH) where either absent or at low levels. Characterization data for another potential construction site adjacent to an aboveground diesel fuel storage tank southeast of the old diesel power plant revealed high concentrations of diesel fuel in the soil and groundwater beneath the site. Results of this investigation indicate that there are petroleum-contaminated soils on Kwajalein Island and bioremediation appears to be a viable environmental restoration technique. Further experimentation and field demonstration are required to determine the design and operating conditions that provide for optimum biodegradation and restoration of the petroleum-contaminated soils. 17 refs., 7 figs., 26 figs.

  16. Demonstration of an advanced circulation fludized bed coal combustor phase 1: Cold model study. Final report

    SciTech Connect (OSTI)

    Govind, R. [Cincinnati Univ., OH (United States). Dept. of Chemical Engineering

    1993-03-20T23:59:59.000Z

    It was found that there was a strong dependence of the density profile on the secondary air injection location and that there was a pronounced solid separation from the conveying gas, due to the swirl motion. Furthermore, the swirl motion generated strong internal circulation patterns and higher slip velocities than in the case of nonswirl motion as in an ordinary circulating fluidized bed. Radial solids flux profiles were measured at different axial locations. The general radial profile in a swirling circulating fluidized bed indicated an increased downward flow of solids near the bed walls, and strong variations in radial profiles along the axial height. For swirl numbers less than 0.9, which is typical for swirling circulating fluidized beds, there is no significant increase in erosion due to swirl motion inside the bed. Pending further investigation of swirl motion with combustion, at least from our cold model studies, no disadvantages due to the introduction of swirl motion were discovered.

  17. Making It Easier To Be Green: A Single Case Demonstration of the Effects of Computer Defaults To Conserve Energy in a University Computer Lab

    E-Print Network [OSTI]

    Hirst, Jason M.; Reed, Derek D.; Kaplan, Brent A.; Miller, Jonathan R.

    2013-12-06T23:59:59.000Z

    KU ScholarWorks | http://kuscholarworks.ku.edu Making It Easier To Be Green: A Single Case Demonstration of the Effects of Computer Defaults To Conserve Energy in a University Computer Lab by Jason M. Hirst et al. KU ScholarWorks is a service..., Derek D. Reed, Brent A. Kaplan, and Jonathan R. Miller. (2013). Making It Easier To Be Green: A Single Case Demonstration of the Effects of Computer Defaults To Conserve Energy in a University Computer Lab. Sustainability: The Journal of Record 6...

  18. Wind to Hydrogen in California: Case Study

    SciTech Connect (OSTI)

    Antonia, O.; Saur, G.

    2012-08-01T23:59:59.000Z

    This analysis presents a case study in California for a large scale, standalone wind electrolysis site. This is a techno-economic analysis of the 40,000 kg/day renewable production of hydrogen and subsequent delivery by truck to a fueling station in the Los Angeles area. This quantity of hydrogen represents about 1% vehicle market penetration for a city such as Los Angeles (assuming 0.62 kg/day/vehicle and 0.69 vehicles/person) [8]. A wind site near the Mojave Desert was selected for proximity to the LA area where hydrogen refueling stations are already built.

  19. Geothermal Case Study Challenge | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To: Congestion StudyForecasting.Energy In SeptemberGeothermal Case

  20. Product Demonstrations

    Broader source: Energy.gov [DOE]

    The Consortium will pursue a number of demonstrations following the general procedure used by DOE's GATEWAY demonstration program. Specific products to be featured in a demonstration may be...

  1. Fuel Cell Vehicle Learning Demonstration: Study of Factors Affecting Fuel Cell Degradation

    SciTech Connect (OSTI)

    Kurtz, J.; Wipke, K.; Sprik, S.

    2008-11-01T23:59:59.000Z

    Conference paper prepared for the FuelCell2008 conference describing the results of the DOE Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project.

  2. Building Energy Information Systems: User Case Studies

    SciTech Connect (OSTI)

    Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish

    2010-03-22T23:59:59.000Z

    Measured energy performance data are essential to national efforts to improve building efficiency, as evidenced in recent benchmarking mandates, and in a growing body of work that indicates the value of permanent monitoring and energy information feedback. This paper presents case studies of energy information systems (EIS) at four enterprises and university campuses, focusing on the attained energy savings, and successes and challenges in technology use and integration. EIS are broadly defined as performance monitoring software, data acquisition hardware, and communication systems to store, analyze and display building energy information. Case investigations showed that the most common energy savings and instances of waste concerned scheduling errors, measurement and verification, and inefficient operations. Data quality is critical to effective EIS use, and is most challenging at the subsystem or component level, and with non-electric energy sources. Sophisticated prediction algorithms may not be well understood but can be applied quite effectively, and sites with custom benchmark models or metrics are more likely to perform analyses external to the EIS. Finally, resources and staffing were identified as a universal challenge, indicating a need to identify additional models of EIS use that extend beyond exclusive in-house use, to analysis services.

  3. NAS battery demonstration at American Electric Power:a study for the DOE energy storage program.

    SciTech Connect (OSTI)

    Newmiller, Jeff (Endecon Engineering, San Ramon, CA); Norris, Benjamin L. (Norris Energy Consulting Company, Martinez, CA); Peek, Georgianne Huff

    2006-03-01T23:59:59.000Z

    The first U.S. demonstration of the NGK sodium/sulfur battery technology was launched in August 2002 when a prototype system was installed at a commercial office building in Gahanna, Ohio. American Electric Power served as the host utility that provided the office space and technical support throughout the project. The system was used to both reduce demand peaks (peak-shaving operation) and to mitigate grid power disturbances (power quality operation) at the demonstration site. This report documents the results of the demonstration, provides an economic analysis of a commercial sodium/sulfur battery energy storage system at a typical site, and describes a side-by-side demonstration of the capabilities of the sodium/sulfur battery system, a lead-acid battery system, and a flywheel-based energy storage system in a power quality application.

  4. DOE Zero Energy Ready Home Case Study: Garbett Homes, Herriman...

    Energy Savers [EERE]

    Garbett Homes, Herriman, UT, Production Home DOE Zero Energy Ready Home Case Study: Garbett Homes, Herriman, UT, Production Home Case study of a DOE Zero Energy Ready Home in...

  5. Wind Energy Curtailment Case Studies: May 2008 - May 2009

    SciTech Connect (OSTI)

    Fink, S.; Mudd, C.; Porter, K.; Morgenstern, B.

    2009-10-01T23:59:59.000Z

    This paper presents a series of case studies on how wind curtailment is being used by different entities.

  6. Interaction between domestic and international students: a case study on

    E-Print Network [OSTI]

    Amin, S. Massoud

    Interaction between domestic and international students: a case study on the perspective of CIDE of domestic students is limited. Case study conducted in Fall 2009 Purpose to explore current level integration ·Case studies "We cannot simply assume that interaction between local and international students

  7. Internationalizing the Curriculum and Campus Institutional Case Studies of Curriculum

    E-Print Network [OSTI]

    Amin, S. Massoud

    Internationalizing the Curriculum and Campus Institutional Case Studies of Curriculum Integration campuses and throughout the state. #12;Contents Introduction 1 Surveys 2 Interviews 5 Case Studies 6 North;Preface This publication represents ongoing research by the University of Minnesota into case studies

  8. Cell fleet planning : an industry case study

    E-Print Network [OSTI]

    Silva, Armando C.

    1984-01-01T23:59:59.000Z

    The objective of this thesis is to demonstrate the practical use of the Cell Fleet Planning Model in planning the fleet for the U.S. airline industry. The Cell Model is a cell theory, linear programming approach to fleet ...

  9. Laboratories for the 21st Century: Case Studies; National Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1.11 Wgross ft 2 (weighted average) x 2080 hours1000 2.3 kWhgross ft 2 . (In other case studies, it was assumed that lights are on 87.2 hoursweek. In this case, because of...

  10. Live Webinar on Better Buildings Case Competition: Energy Efficiency in the Restaurant Franchise Model Case Study

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webinar titled "A Side of Savings: Energy Efficiency in the Restaurant Franchise Model Case Study."

  11. Live Webinar on Better Buildings Case Competition: Taking Commercial PACE Financing to Scale, a Case Study

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webinar titled "A Side of Savings: Energy Efficiency in the Restaurant Franchise Model Case Study."

  12. Study of five corrugated case designs 

    E-Print Network [OSTI]

    Rogers, Roxanne Russell

    1996-01-01T23:59:59.000Z

    The purpose of the research described in this thesis is to define the primary damages occurring to corrugated cases in the normal distribution system of Frito-Lay, Incorporated and compare the relative performance (to be defined in terms of trip...

  13. Study of five corrugated case designs

    E-Print Network [OSTI]

    Rogers, Roxanne Russell

    1996-01-01T23:59:59.000Z

    The purpose of the research described in this thesis is to define the primary damages occurring to corrugated cases in the normal distribution system of Frito-Lay, Incorporated and compare the relative performance (to be defined in terms of trip...

  14. Failing Westphalia: Demonstrating complex sovereignty through a study of the Angolan Oil Economy 

    E-Print Network [OSTI]

    Carryer, Andrew

    2012-11-01T23:59:59.000Z

    Abstract In contemporary studies of Africa the Westphalian style ‘sovereign state’ is often utilised as the primary analytical tool. As this concept of sovereignty presumes that the state is in a sense ‘all powerful’, ...

  15. Case Study on Enhancing Equipment Efficiency and Operational Practices of a Signature LEED Building

    E-Print Network [OSTI]

    Tseng, P.

    2005-01-01T23:59:59.000Z

    to receive certification in the U.S. capital. The project demonstrates the feasibility of incorporate green features into a new class of buildings that historically have resisted sustainable design – the speculative office building market. Sustainable... to assist the project team and building owners to address the issue of persistence of system performance and commissioning benefits. Persistence of Performance and Savings: The examples in the case study attempts to demonstrate the transitory nature...

  16. Verifying Program Optimizations in Agda Case Study: List Deforestation

    E-Print Network [OSTI]

    Abel, Andreas

    Verifying Program Optimizations in Agda Case Study: List Deforestation Andreas Abel 3 July 2012 of deforestation. As a result we show that the summation of the first n natural numbers, implemented by producing structures is called deforestation, since data structures are tree-shaped in the general case. In our case

  17. Verifying Program Optimizations in Agda Case Study: List Deforestation

    E-Print Network [OSTI]

    Abel, Andreas

    Verifying Program Optimizations in Agda Case Study: List Deforestation Andreas Abel 16 July 2009 of deforestation. As a result we show that the summation of the rst n natural numbers, implemented by producing structures is called deforestation, since data structures are tree-shaped in the general case. In our case

  18. Streams of Steam The Steam Boiler Specification Case Study

    E-Print Network [OSTI]

    Streams of Steam ­ The Steam Boiler Specification Case Study Manfred Broy, Franz Regensburger-tuned con- cepts of FOCUS by its application of the requirements specification of a steam boiler, see [Abr96-studies. In this context, applying FOCUS to the steam boiler case study ([Abr96]) led us to a couple of questions re- #12

  19. air case study: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    understand processes of territorial Paris-Sud XI, Universit de 28 CASE STUDY: Textron Systems MIT - DSpace Summary: For over five decades, Textron Systems has been an important...

  20. africa case study: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Change Mitigation Projects: Summary of Findings from Case Studies in Brazil, India, Mexico, and South Africa University of California eScholarship Repository Summary:...

  1. africa case studies: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Change Mitigation Projects: Summary of Findings from Case Studies in Brazil, India, Mexico, and South Africa University of California eScholarship Repository Summary:...

  2. Whole-House Solutions Case Study: Sunnyvale Marine Climate Deep...

    Broader source: Energy.gov (indexed) [DOE]

    California More Documents & Publications Building America Webinar: Deep Energy Retrofit Case Studies: Lessons Learned Building America Whole-House Solutions for New Homes: Hood...

  3. conjectures, case-studies, and consequences - Optimization Online

    E-Print Network [OSTI]

    Benjamin Recht

    2012-02-19T23:59:59.000Z

    Feb 19, 2012 ... Beneath the valley of the noncommutative arithmetic-geometric mean inequality: conjectures, case-studies, and consequences. Benjamin ...

  4. The opportunistic replacement problem: analysis and case studies

    E-Print Network [OSTI]

    Torgny Almgren

    2009-01-22T23:59:59.000Z

    Jan 22, 2009 ... The opportunistic replacement problem: analysis and case studies. Torgny Almgren (Torgny.Almgren ***at*** volvo.com) Niclas Andreasson ...

  5. Regional Power Sector Integration: Lessons from Global Case Studies...

    Open Energy Info (EERE)

    Integration: Lessons from Global Case Studies and a Literature Review Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Regional Power Sector Integration: Lessons from...

  6. TRB-Transit Cooperative Research Program (TCRP): Case Studies...

    Open Energy Info (EERE)

    TRB-Transit Cooperative Research Program (TCRP): Case Studies in Bus Rapid Transit Jump to: navigation, search Tool Summary LAUNCH TOOL Name: TRB-Transit Cooperative Research...

  7. Case Study - The Department of Veterans Affairs West Haven Campus...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Department of Veterans Affairs West Haven Campus, VA Connecticut Health Care System Case Study - The Department of Veterans Affairs West Haven Campus, VA Connecticut Health...

  8. Microsoft Word - Case Study for Enhanced Accident Tolerance Design...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2355 Case Study for Enhanced Accident Tolerance Design Changes Steven Prescott Curtis Smith Tony Koonce June 2014 DISCLAIMER This information was prepared as an account of work...

  9. Workforce Training Case Study Workforce Training for the Electric...

    Office of Environmental Management (EM)

    Workforce Training Case Study Workforce Training for the Electric Power Sector: Transforming the Nation's Electric Grid by Training Skilled Workers The deployment of a smart...

  10. Case Study: Evaluating Liquid versus Air Cooling in the Maui...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Energy Efficiency Opportunities in Federal High Performance Computing Data Centers Case Study: Innovative Energy Efficiency Approaches in NOAA's...

  11. Case Study: Opportunities to Improve Energy Efficiency in Three...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Energy Efficiency Opportunities in Federal High Performance Computing Data Centers Case Study: Innovative Energy Efficiency Approaches in NOAA's...

  12. A Successful Case Study of Small Business Energy Efficiency and...

    Open Energy Info (EERE)

    Energy Efficiency Topics: Socio-Economic Website: drrc.lbl.govsitesdrrc.lbl.govfileslbnl-2743e.pdf Equivalent URI: cleanenergysolutions.orgcontentsuccessful-case-study-small-...

  13. Case Studies and Computing: Broadening the scope of statistical education

    E-Print Network [OSTI]

    Nolan, Deborah

    Case Studies and Computing: Broadening the scope of statistical education Deborah Nolan University theoretical statis- tics course. Sixty students enrolled in this course, including graduate students

  14. approach case study: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Restoration Websites Summary: Technology Overview Using Case Studies of Alternative Landfill Technologies and Associated and safety risks and precautions with respect to...

  15. america case studies: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Restoration Websites Summary: Technology Overview Using Case Studies of Alternative Landfill Technologies and Associated and safety risks and precautions with respect to...

  16. Active System For Monitoring Volcanic Activity- A Case Study...

    Open Energy Info (EERE)

    Central Japan Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Active System For Monitoring Volcanic Activity- A Case Study Of The...

  17. In situ vitrification demonstration at Pit 1, Oak Ridge National Laboratory. Volume 1: Results of treatability study

    SciTech Connect (OSTI)

    Spalding, B.P.; Naney, M.T.; Cline, S.R.; Bogle, M.A. [Oak Ridge National Lab., TN (United States). Environmental Sciences Div.; Tixier, J.S. [Pacific Northwest National Lab., Richland, WA (United States)

    1997-12-01T23:59:59.000Z

    A treatability study was initiated in October 1993 to apply in situ vitrification (ISV) to at least two segments of Oak Ridge National Laboratory (ORNL) seepage Pit 1 by the end of fiscal year (FY) 1995. This treatability study was later extended to include all of Pit 1 and was performed to support a possible Interim Record of Decision or removal action for closure of one or more of the seepage pits and trenches beginning as early as FY 1997. This treatability study was carried out to establish the field-scale technical performance of ISV for (1) attaining the required depth, nominally 15 ft, to incorporate source contamination within and beneath the pits; (2) demonstrating field capability for the overlap of melt settings which will be necessary to achieve fused, melted segments of the source contamination; (3) demonstrating off-gas handling technology for accommodating and minimizing the volatilization of {sup 137}Cs; (4) demonstrating adequate site characterization techniques to predict ISV melting kinetics, processing temperatures, and product durability; and (5) promoting public acceptance of ISV technology by demonstrating its safety, implementability, site impacts, and air emissions and by coordinating the treatability study within the regulatory closure process. In April 1996 an expulsion of an estimated 10% of the 196 Mg (216 tons) melt body occurred resulting in significant damage to ISV equipment and, ultimately, led to an indefinite suspension of further ISV operations at Pit 1. This report summarizes the technical accomplishments and status of the project in fulfilling these objectives through September 1997.

  18. Applying the logic of sample surveys to qualitative case studies: The case cluster method

    E-Print Network [OSTI]

    McClintock, Charles C.; Brannon, Diane; Maynard-Moody, Steven

    1986-03-01T23:59:59.000Z

    Applying the Logic of Sample Suiveys to Qual- itative Case Studies: The Case Cluster Method* Charles C. McClintock, Diane Brannon, and Steven Maynard-Moody ©1979 by ComeU University. 0001 -8392/7^404-0612$00.75 We are grateful to Joe Frances... spe- dal concem vwth int^nai validity, albeit one that employs different the cpiatitative case study. December 1979, volume 24 The differences between case study and sample survey strategies in the analysis of organizations reflect a broader...

  19. Minimizing Cache Misses in an Event-driven Network Server: A Case Study of TUX

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Minimizing Cache Misses in an Event-driven Network Server: A Case Study of TUX Sapan Bhatia Georgia@diku.dk Abstract We analyze the performance of CPU-bound network servers and demonstrate experimentally that the degra- dation in the performance of these servers under high- concurrency workloads is largely due

  20. INTERIOR LIGHTING CASE STUDY For more information, visit PARTNERSHIPDEMONSTRATIONS.ORG

    E-Print Network [OSTI]

    California at Davis, University of

    INTERIOR LIGHTING CASE STUDY » For more information, visit PARTNERSHIPDEMONSTRATIONS.ORG In 2013 the SPEED team collaborated with UC San Francisco to demonstrate three lighting retrofits of fluorescent the feasibility of adaptive corridor lighting retrofits for sites with different budgets and financing

  1. EXTERIOR LIGHTING CASE STUDY For more information, visit PARTNERSHIPDEMONSTRATIONS.ORG

    E-Print Network [OSTI]

    California at Davis, University of

    EXTERIOR LIGHTING CASE STUDY » For more information, visit PARTNERSHIPDEMONSTRATIONS.ORG In 2013, UC Santa Barbara partnered with the SPEED team to demonstrate network controlled LED lighting sensors. These lighting controls allowed all the units to be incorporated into an adaptive mesh network

  2. Technology Infusion for Complex Systems: A Framework and Case Study*

    E-Print Network [OSTI]

    de Weck, Olivier L.

    Technology Infusion for Complex Systems: A Framework and Case Study* Eun Suk Suh,1, Michael R Avenue, Cambridge, MA 02139TECHNOLOGY INFUSION FOR COMPLEX SYSTEMS: CASE STUDY Received 1 July 2008 in today's competitive environment constantly need to develop new technolo- gies and infuse them

  3. A Case Study in Sequential Pattern Mining for ITOperational Risk

    E-Print Network [OSTI]

    Ruggieri, Salvatore

    A Case Study in Sequential Pattern Mining for IT­Operational Risk Valerio Grossi, Andrea Romei of a network of Private Branch eXchanges (PBXs). The approach relies on preprocessing and data mining tasks. In this paper, we concentrate on the high frequency low impact class of risk by reporting a case study in IT­operational

  4. GATEWAY Demonstrations

    Broader source: Energy.gov [DOE]

    DOE GATEWAY demonstrations showcase high-performance LED products for general illumination in a variety of commercial and residential applications. Demonstration results provide real-world experience and data on state-of-the-art solid-state lighting (SSL) product performance and cost effectiveness. These results connect DOE technology procurement efforts with large-volume purchasers and provide buyers with reliable data on product performance.

  5. The application of bilingual language acquisition strategies: two case studies 

    E-Print Network [OSTI]

    Carla, Xavier

    2010-11-24T23:59:59.000Z

    In studies of language choice patterns in families, most of the study cases are based on reports written by linguists about their own children bilingual development. Therefore, there is a strong possibility that the ...

  6. Software archeology: a case study in software quality assurance and design

    SciTech Connect (OSTI)

    Macdonald, John M [Los Alamos National Laboratory; Lloyd, Jane A [Los Alamos National Laboratory; Turner, Cameron J [COLORADO SCHOOL OF MINES

    2009-01-01T23:59:59.000Z

    Ideally, quality is designed into software, just as quality is designed into hardware. However, when dealing with legacy systems, demonstrating that the software meets required quality standards may be difficult to achieve. As the need to demonstrate the quality of existing software was recognized at Los Alamos National Laboratory (LANL), an effort was initiated to uncover and demonstrate that legacy software met the required quality standards. This effort led to the development of a reverse engineering approach referred to as software archaeology. This paper documents the software archaeology approaches used at LANL to document legacy software systems. A case study for the Robotic Integrated Packaging System (RIPS) software is included.

  7. Appropriate Technology Small Grants Program evaluation: case studies. Volume III

    SciTech Connect (OSTI)

    Not Available

    1984-03-01T23:59:59.000Z

    A non-random sample of the Appropriate Technology Program grantees was selected to ensure that the basic goals of the evaluation study were met. Case studies of selected outstanding projects could provide with respect to the Program dynamics associated with success. It was believed that the non-random case study approach would assist us in assessing which approaches have the potential to impact a reduction in our nation's use of non-renewal energy. From this group of projects, 20 projects were selected to highlight in a case study format which illustrates the various types of projects approaches the Program supported.

  8. The Case for Increasing Enrollment and Leveraging Marginal Costs: CSUN Case Study

    E-Print Network [OSTI]

    Shubin, Carol

    The Case for Increasing Enrollment and Leveraging Marginal Costs: CSUN Case Study H. Hellenbrand1 will estimate the marginal cost for increasing enrollment from a theoretical point of view. This analysis will use data from the IPEDS data base and formulae for replacement costs suggested by the Legislative

  9. Appropriate Technology Small Grants Program. Code case studies

    SciTech Connect (OSTI)

    Not Available

    1981-05-01T23:59:59.000Z

    The first year's operation of the Small Grants Program at a national scale was evaluated. The purpose of this management evaluation is to provide the headquarters Office of Inventions and Small Scale Technology and the ten regional program managers with findings and recommendations which will be useful to more effectively administer in the future. These conclusions are based on responses to a questionnaire from 197 program participants as well as personal interviews and telephone conversations with roughly half of the respondents. This report presents a compilation of case studies of projects which were funded during FY 78 and FY 79. These case studies focus on code issues (e.g., building, zoning, planning) that grantees may have dealt with. Possible problems that may have been encountered and resolution actions that grantees may have taken were researched. The results are presented in the form of a brief discussion of code issues followed by the case studies of relevant projects. The technological areas of interest are: Utility interconnection case studies, grants in which electric power is produced by small scale wind and hydroelectric facilities and for which interconnection with a utility grid is possible; Biomass case studies, grants involving composting and small scale methane production; and Geothermal case studies, grants in which either groundwater or the earth's thermal energy is used as a source for heating and cooling. Each case study provides a brief overview of a grantee's project including its objective, description, and benefits.

  10. Heat Pump Application- An Industrial Case Study

    E-Print Network [OSTI]

    Shukla, D.; Umoh, R.

    of additional compressor work required to lift thermal energy from a low source temperature to a high sink temperature. A reduction of this work improves the heat pump economics. This paper presents the results of a heat pump study conducted by TENSA... technology and by making some process modifications, the compressor work can be reduced significantly. INTRODUCTION Heat pumps, used in conjunction with conventional heat exchangers networks (HEN) provide an effective means for reducing the energy...

  11. Deep Energy Retrofit Performance Metric Comparison: Eight California Case Studies

    SciTech Connect (OSTI)

    Walker, Iain; Fisher, Jeremy; Less, Brennan

    2014-06-01T23:59:59.000Z

    In this paper we will present the results of monitored annual energy use data from eight residential Deep Energy Retrofit (DER) case studies using a variety of performance metrics. For each home, the details of the retrofits were analyzed, diagnostic tests to characterize the home were performed and the homes were monitored for total and individual end-use energy consumption for approximately one year. Annual performance in site and source energy, as well as carbon dioxide equivalent (CO{sub 2}e) emissions were determined on a per house, per person and per square foot basis to examine the sensitivity to these different metrics. All eight DERs showed consistent success in achieving substantial site energy and CO{sub 2}e reductions, but some projects achieved very little, if any source energy reduction. This problem emerged in those homes that switched from natural gas to electricity for heating and hot water, resulting in energy consumption dominated by electricity use. This demonstrates the crucial importance of selecting an appropriate metric to be used in guiding retrofit decisions. Also, due to the dynamic nature of DERs, with changes in occupancy, size, layout, and comfort, several performance metrics might be necessary to understand a project’s success.

  12. Two Case Studies on Vision-based Moving Objects Measurement

    E-Print Network [OSTI]

    Zhang, Ji

    2012-10-19T23:59:59.000Z

    In this thesis, we presented two case studies on vision-based moving objects measurement. In the first case, we used a monocular camera to perform ego-motion estimation for a robot in an urban area. We developed the algorithm based on vertical line...

  13. Structural analysis of closure cap barriers: A pre-test study for the Bentonite Mat Demonstration Project. Revision 1

    SciTech Connect (OSTI)

    Gong, Chung; Pelfrey, J.R.

    1993-12-01T23:59:59.000Z

    The Bentonite Mat Demonstration Project (BMDP) is a field demonstration study to determine the construction/installation requirements, permeability, and subsidence performance characteristics of a composite barrier. The composite barrier will consist of on-site sandy-clay blanketed by a bentonite mat and a flexible High Density Polyethylene (HDPE) liner (also called flexible membrane liner). Construction of one control test pad and three bentonite test pads are planned. The control test pad will be used to establish baseline data. Underneath the composite clay cap is a four feet thick loose sand layer in which cavities will be created by evacuation of sand. The present work provides a mathematical model for the BMDP. The mathematical model will be used to simulate the mechanical and structural responses of the composite clay cap during the testing processes. Based upon engineering experience and technical references, a set of nominal soil parameters have been selected.

  14. Industrial process heat case studies. [PROSYS/ECONMAT code

    SciTech Connect (OSTI)

    Hooker, D.W.; May, E.K.; West, R.E.

    1980-05-01T23:59:59.000Z

    Commercially available solar collectors have the potential to provide a large fraction of the energy consumed for industrial process heat (IPH). Detailed case studies of individual industrial plants are required in order to make an accurate assessment of the technical and economic feasibility of applications. This report documents the results of seven such case studies. The objectives of the case study program are to determine the near-term feasibility of solar IPH in selected industries, identify energy conservation measures, identify conditions of IPH systems that affect solar applications, test SERI's IPH analysis software (PROSYS/ECONOMAT), disseminate information to the industrial community, and provide inputs to the SERI research program. The detailed results from the case studies are presented. Although few near-term, economical solar applications were found, the conditions that would enhance the opportunities for solar IPH applications are identified.

  15. Do Small Companies Care About Energy Savings?: A Case Study 

    E-Print Network [OSTI]

    Agrawal, S.; Jensen, R.

    1998-01-01T23:59:59.000Z

    DO SMALL COMPANIES CARE ABOUT ENERGY SAVINGS?: A CASE STUDY Sanjay Agrawal Assistant Director Richard Jensen Director Industrial Assessment Center Department of Engineering Hofstra University, Hempstead, NY 11549 ABSTRACT Often times small...

  16. Electric Demand Cost Versus Labor Cost: A Case Study 

    E-Print Network [OSTI]

    Agrawal, S.; Jensen, R.

    1998-01-01T23:59:59.000Z

    ELEcrRIC DEMAND COST Versus LABOR COST: A CASE STUDY Sanjay Agrawal Richard Jensen Assistant Director Director Industrial Assessment Center Department of Engineering Hofstra University, Hempstead, NY 11549 ABSTRAcr Electric Utility companies...

  17. Technology Overview Using Case Studies of Alternative Landfill Technologies

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technology Overview Using Case Studies of Alternative Landfill Technologies and Associated Regulatory Topics Prepared by Interstate Technology & Regulatory Council Alternative Landfill Technologies of Alternative Landfill Technologies and Associated Regulatory Topics March 2003 Prepared by Interstate

  18. Analysis of Academic Ties: A Case Study of Mathematics Genealogy

    E-Print Network [OSTI]

    Gunes, Mehmet Hadi

    Analysis of Academic Ties: A Case Study of Mathematics Genealogy Engin Arslan, Mehmet Hadi Gunes the Mathematics Genealogy Project data. Additionally, using university and nation information of mathematicians over the years. Keywords - Academic ties, mathematics genealogy, social network. 1. INTRODUCTION

  19. Two Recovery Act Funding Case Studies Now Available

    Broader source: Energy.gov [DOE]

    Utilities across America are using Recovery Act funds and smart grid technologies to deliver more reliable and affordable power, recover from major storms, and improve operations. Two case studies are now available.

  20. PROJECT SELF-EVALUATION METHODOLOGY: THE HEALTHREATS PROJECT CASE STUDY

    E-Print Network [OSTI]

    Bohanec, Marko

    PROJECT SELF-EVALUATION METHODOLOGY: THE HEALTHREATS PROJECT CASE STUDY Martin Znidarsic1 , Marko, Slovenia e-mail: martin.znidarsic@ijs.si Tel: +386 1 477 3366; fax: +386 1 477 3315 ABSTRACT The paper

  1. Land reform and economic development : case study on Romania

    E-Print Network [OSTI]

    Vidican Sgouridis, Georgeta.

    2004-01-01T23:59:59.000Z

    Few social arrangements have affected so many people for so long in human history, as the laws and customs governing the ownership and use of land. Taking Romania as a case study, this thesis focuses on the institutional ...

  2. Comparative case studies of health reform in England

    E-Print Network [OSTI]

    Birmingham, University of

    Comparative case studies of health reform in England Report submitted to the Department of Health........................................................................................14 1.1 Presenting the Health System Reform policy agenda...................................14 1 ..........................................................................................64 Demand Side Reform.........................................

  3. area case study: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OF ETM+ DATA FOR ESTIMATING RANGELANDS COVER PERCENTAGE (CASE STUDY: CHAMESTAN AREA, IRAN) CiteSeer Summary: The major land cover in Iran is rangeland, so it is not possible to...

  4. areas case study: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OF ETM+ DATA FOR ESTIMATING RANGELANDS COVER PERCENTAGE (CASE STUDY: CHAMESTAN AREA, IRAN) CiteSeer Summary: The major land cover in Iran is rangeland, so it is not possible to...

  5. DOE Zero Energy Ready Home Case Study, Caldwell and Johnson,...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Home Case study of a DOE Zero Energy Ready Home in Exeter, Rhode Island, that scored HERS 43 without PV. This 2,000 ft2 custom home has a spray- foamed attic and walls, plus...

  6. DOE Zero Energy Ready Home Case Study, Transformations, Inc....

    Energy Savers [EERE]

    House, Devens, MA Case study of a DOE Zero Energy Ready Home in Devens, MA that scored HERS 34 without PV or HERS -21 with PV. This 3,168 ft2 custom home has R-46 double-stud...

  7. Building America Efficient Solutions for New Homes Case Study...

    Broader source: Energy.gov (indexed) [DOE]

    and Energy Smart Home Plans to design zero-energy ready homes that score under HERS 60 for less than 2% added cost over code construction. Case Study: Heritage Buildings,...

  8. Building America Efficient Solutions for New Homes Case Study...

    Broader source: Energy.gov (indexed) [DOE]

    PNNL and FSEC helped Habitat for Humanity of Palm Beach County build three <60 HERS prototype homes, 30% better than their typical homes at a cost of only 1,500 more. Case Study:...

  9. A Case Study in Ontologies for Probabilistic Networks

    E-Print Network [OSTI]

    Utrecht, Universiteit

    A Case Study in Ontologies for Probabilistic Networks Eveline M. Helsper and Linda C. van der Gaag, The Netherlands {eveline,linda}@cs.uu.nl Abstract. Building a probabilistic network for a real-life domain of ap

  10. A Case Study in Ontologies for Probabilistic Networks

    E-Print Network [OSTI]

    Utrecht, Universiteit

    A Case Study in Ontologies for Probabilistic Networks Eveline M. Helsper and Linda C. van der Gaag, The Netherlands {eveline,linda}@cs.uu.nl Abstract. Building a probabilistic network for a real­life domain of ap

  11. Biosphere reserves in action: Case studies of the American experience

    SciTech Connect (OSTI)

    None

    1995-06-26T23:59:59.000Z

    For nearly 20 years, biosphere reserves have offered a unique framework for building the knowledge, skills, and attitudes required for conservation and sustainable use of ecosystems. The 12 case studies in this volume chronicle many of the cooperative efforts to implement the biosphere reserve concept in the United States. Considered together, these efforts involve more than 20 types of protected areas, and the participation of all levels of government, and many private organizations, academic institutions, citizens groups, and individuals. Biosphere reserves are multi-purpose areas that are nominated by the national committee of the Man and the Biosphere Program (MAB) and designated by the United Nations Educational, Scientific and Cultural Organization (UNESCO) to serve as demonstration areas for cooperation in building harmonious relationships between human activities and the conservation of ecosystems and biological diversity. Each biosphere reserve exemplifies the characteristic ecosystems of one of the worlds biogeographical regions. It is a land or coas%arine area involving human communities as integral components and including resources managed for objectives ranging from complete protection to intensive, yet sustainable development. A biosphere reserve is envisioned as a regional ''landscape for learning'' in which monitoring, research, education, and training are encouraged to support sustainable conservation of natural and managed ecosystems. It is a framework for regional cooperation involving government decisionmakers, scientists, resource managers, private organizations and local people (i.e., the biosphere reserve ''stakeholders''). Finally, each biosphere reserve is part of a global network for sharing information and experience to help address complex problems of conservation and development. The 12 case studies presented in this report represent only a few of the possible evolutions of a biosphere reserve in its efforts to reach out to the local and regional community. As you have read, some have had great success, while others consider their successes almost negligible. All document tremendous effort from many people to improve the communication among landowners, land managers, scientists, and any others interested in the health and well-being of the natural and human environment of the biosphere reserve.

  12. Case studies on recent fossil-fired plants

    SciTech Connect (OSTI)

    Henderson, C. [IEA Clean Coal Centre, London (United Kingdom)

    2007-12-31T23:59:59.000Z

    The article summarises the findings of case studies on fossil-fired power plants carried out by the IEA Clean Coal Centre for the IEA at the request of world leaders at the Gleneagles G8 Summit in July 2005. The studies compared the cost, efficiency and emissions of eight recently constructed coal-fired plants using pulverized coal combustion with subcritical, supercritical or ultra-supercritical steam turbine cycles. Also included was a review of IGCC developments. A case study of a natural gas combined-cycle plant was included for comparison. The full report has been published by the IEA. 1 tab.

  13. Quantifying Network Denial of Service: A Location Service Case Study

    E-Print Network [OSTI]

    Kubiatowicz, John D.

    1 Quantifying Network Denial of Service: A Location Service Case Study Yan Chen, Adam Bargteil distributed denial-of-service (DDoS) attacks with a few keystrokes [11]. Besides these com- mon flooding classes of network DoS at- tacks, we propose a novel benchmarking methodology and apply it to study

  14. Geothermal Exploration Case Studies on OpenEI (Presentation)

    SciTech Connect (OSTI)

    Young, K.; Bennett, M.; Atkins, D.

    2014-03-01T23:59:59.000Z

    The U.S. Geological Survey (USGS) resource assessment (Williams et al., 2008) outlined a mean 30 GWe of undiscovered hydrothermal resource in the western United States. One goal of the U.S. Department of Energy's (DOE) Geothermal Technology Office (GTO) is to accelerate the development of this undiscovered resource. DOE has focused efforts on helping industry identify hidden geothermal resources to increase geothermal capacity in the near term. Increased exploration activity will produce more prospects, more discoveries, and more readily developable resources. Detailed exploration case studies akin to those found in oil and gas (e.g. Beaumont and Foster, 1990-1992) will give developers central location for information gives models for identifying new geothermal areas, and guide efficient exploration and development of these areas. To support this effort, the National Renewable Energy Laboratory (NREL) has been working with GTO to develop a template for geothermal case studies on the Geothermal Gateway on OpenEI. In 2012, the template was developed and tested with two case studies: Raft River Geothermal Area (http://en.openei.org/wiki/Raft_River_Geothermal_Area) and Coso Geothermal Area (http://en.openei.org/wiki/Coso_Geothermal_Area). In 2013, ten additional case studies were completed, and Semantic MediaWiki features were developed to allow for more data and the direct citations of these data. These case studies are now in the process of external peer review. In 2014, NREL is working with universities and industry partners to populate additional case studies on OpenEI. The goal is to provide a large enough data set to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  15. Case studies of six high priority DOD installations

    SciTech Connect (OSTI)

    NONE

    1994-11-01T23:59:59.000Z

    This is a supplement to the report entitled Environmental Cleanup: Too Many High Priority Sites Impede DOD`s Program. It provides six installation case studies addressing issues including the status of the restoration program, the cost of cleanup to date and projected costs, the cleanup options considered, the option selected, expected completion, and the applicable cleanup standards. The case studies also provide installation specific information on reasons installation was listed on the NPL, the regulatory process, cooperation between the installation and the regulatory agencies, staffing at the installations and the regulatory agencies, and the process for funding the cleanup.

  16. Nash reservoir management study with stochastic images -- A case study

    SciTech Connect (OSTI)

    Fanchi, J.R.; Meng, H.Z.; Stoltz, R.P.; Owen, M.W.

    1996-09-01T23:59:59.000Z

    An application of geostatistical modeling in the context of a full-field reservoir model study of the Northeast Nash waterflood is described. Geostatistics provides value in preparing and quickly modifying a self-consistent model of reservoir geology. It does not, however, provide a complete description of all the geologic features that impact fluid flow. A rationale for selecting a stochastic description instead of a deterministic description is presented.

  17. Structural analysis of closure cap barriers: A pre-test study for the Bentonite Mat Demonstration Project

    SciTech Connect (OSTI)

    Gong, Chung

    1993-10-01T23:59:59.000Z

    According to the EPA-recommended closure cap design a waste site can either be covered with a single layer cap made of 36 inches of compacted soil (clay) or with a multilayer cap consisting of an upper vegetative layer underlain by a drainage layer over a low permeability layer. The Bentonite Mat Demonstration Project (BMDP) is a field demonstration study to determine the construction/installation requirements, permeability, and subsidence performance characteristics of a composite barrier. The composite barrier will consist of on-site sandy-clay blanketed by a bentonite mat and a flexible High Density Polyethylene (HDPE) liner (also called flexible membrane liner). Construction of one control test pad and three bentonite test pads are planned. The control test pad will be used to establish baseline data. Underneath the composite clay cap is a four-foot loose sand layer in which cavities will be created by evacuation of sand. The present work provides a mathematical model for the BMDP. The mathematical model will be used to simulate the mechanical and structural responses of the composite clay cap during the testing processes. Based upon engineering experience and technical references, a set of nominal soil parameters have been selected. Currently, detailed soil test data and cavity configuration data are not available to validate the mathematical model. Since the configuration of the cavities created in the testing process is irregular and unpredictable, two extreme configurations are considered in this mathematical model, viz., the circular cavity and the infinitely long trench in the sand underneath the cap. This approach will provide bounds for the testing results.

  18. Temperature Modeling in Activated Sludge Systems: A Case Study

    E-Print Network [OSTI]

    Wells, Scott A.

    Temperature Modeling in Activated Sludge Systems: A Case Study Jacek Makinia, Scott A. Wells, Piotr Zima ABSTRACT: A model of temperature dynamics was developed as part of a general model of activated-sludge biochemical-energy inputs and other activated-sludge, heat-balance terms. All the models were tested under

  19. A Robotic Case Study: Optimal Design for Laparoscopic Positioning Stands

    E-Print Network [OSTI]

    A Robotic Case Study: Optimal Design for Laparoscopic Positioning Stands ALI FARAZ SHAHRAM PAYANDEH Experimental Robotics Laboratory (ERL), School of Engineering Science Simon Fraser University, Burnaby, British­ sition and lock endoscopic tools without the need for an assistant surgeon. The kinematic configuration

  20. A Robotic Case Study: Optimal Design for Laparoscopic Positioning Stands

    E-Print Network [OSTI]

    A Robotic Case Study: Optimal Design for Laparoscopic Positioning Stands ALI FARAZ SHAHRAM PAYANDEH Experimental Robotics Laboratory ERL, School of Engineering Science Simon Fraser University, Burnaby, British- sition and lock endoscopic tools without the need for an assistant surgeon. The kinematic con guration

  1. A Case Study in Developing Process Unit Energy Metrics 

    E-Print Network [OSTI]

    Davis, J. L.; Van Atta, B.

    2006-01-01T23:59:59.000Z

    At the 2005 IETC Conference, KBC (Davis and Knight) submitted a paper on Integrating Process Unit Energy Metrics into a Plant Energy Managemenet System. For the 2006 conference, KBC wishes to submit a paper that details an actual case study where...

  2. MIT CTL RESEARCH PAPER CASE STUDIES IN CARBON-

    E-Print Network [OSTI]

    de Weck, Olivier L.

    it is increasingly popular with shippers due to the cost reduction potential. In 2011, after a new distribution In this case study we present two Ocean Spray initiatives -- distribution network redesign and intermodal shift from road to rail -- that in combination led to a 20% reduction in transportation CO2 emissions, while

  3. Citizen Science Case Study: Galaxy Zoo / Zooniverse Nathan R. Prestopnik

    E-Print Network [OSTI]

    Crowston, Kevin

    Citizen Science Case Study: Galaxy Zoo / Zooniverse Nathan R. Prestopnik Syracuse University napresto@syr.edu Abstract Galaxy Zoo and other "Zooniverse" websites are citizen science projects designed Zoo and its sister citizen science websites as interactive technology artifacts, with emphasis placed

  4. Analyzing High Energy Physics Data Using Databases: A Case Study

    E-Print Network [OSTI]

    Grossman, Robert

    Analyzing High Energy Physics Data Using Databases: A Case Study R. Grossman, X. &in, D. Valsamis. Nixdorf, B. Scipioni, T. Song Superconducting Supercollider Laboratory Abstract We describe the initial experimental data from high energy physics. At this time, we have designed two proto- types to analyze high

  5. Case Studies of Onsite Energy Systems for Healthcare Facilities

    E-Print Network [OSTI]

    Schwass, R.

    2008-01-01T23:59:59.000Z

    This paper will present two case studies of municipal utility owned and operated combined heat and power (CHP) systems. The first of these two systems is located at a new hospital development in Austin, TX, the Dell Children’s Medical Center...

  6. Beth Brockett SOIL 502 Soil Quality Analysis -Chemistry Case Study

    E-Print Network [OSTI]

    Beth Brockett SOIL 502 Soil Quality Analysis - Chemistry Case Study "Sustainability Street are represented by the Podzolic Order, and more specifically form part of the Bose Soil Management Group) with a limited decomposer community dominated by fungi. Any remnants of native soil at the Sustainability Street

  7. Publishing Historical Texts on the Semantic Web --A Case Study

    E-Print Network [OSTI]

    Hyvönen, Eero

    Publishing Historical Texts on the Semantic Web --A Case Study Eeva Ahonen and Eero Hyv http://www.seco.tkk.fi/ firstname.lastname@tkk.fi Abstract--Historical texts are an important component of cultural heritage, and are being digitized and published on the web in various portals for the researchers

  8. Productivity index and field behavior: a case study

    E-Print Network [OSTI]

    Jensen, Marianne

    1998-01-01T23:59:59.000Z

    ) to explain the irrational behavior of the productivity index in a case study presented. The problem has its origin in a field in north Africa, where irrational behavior of the productivity index (PI) has made it difficult to forecast the field performance...

  9. A Case Study in Developing Process Unit Energy Metrics

    E-Print Network [OSTI]

    Davis, J. L.; Van Atta, B.

    2006-01-01T23:59:59.000Z

    At the 2005 IETC Conference, KBC (Davis and Knight) submitted a paper on Integrating Process Unit Energy Metrics into a Plant Energy Managemenet System. For the 2006 conference, KBC wishes to submit a paper that details an actual case study where...

  10. Case Study/ Effects of Groundwater Development on Uranium

    E-Print Network [OSTI]

    Case Study/ Effects of Groundwater Development on Uranium: Central Valley, California, USA Abstract Uranium (U) concentrations in groundwater in several parts of the eastern San Joaquin Valley development during the last 100 years have changed the chemistry and magnitude of groundwater recharge

  11. Adapting Urban Infrastructure to Climate Change: A Drainage Case Study

    E-Print Network [OSTI]

    Vogel, Richard M.

    models (GCM) to determine changes in the amount of precipitation for the 20-year, 24-h storm- cipitation magnitude and intensity, associated increases in runoff, storm water discharges, and floodingAdapting Urban Infrastructure to Climate Change: A Drainage Case Study Paul Kirshen, M.ASCE1

  12. Groundwater Management Tools: Analytical Procedure and Case Studies

    E-Print Network [OSTI]

    Hickman, Mark

    Groundwater Management Tools: Analytical Procedure and Case Studies MAF Technical Paper No: 2003 and Forestry #12;i Contents Page Executive Summary v Introduction 1 Section A ­ Groundwater Management: Best 2 2.2. Groundwater Budgets 2 2.3. Dynamic Storage 2 3. Scale of Abstraction Effects 3 4. Limitations

  13. Use of multiple digital libraries: a case study Ann Blandford

    E-Print Network [OSTI]

    Blandford, Ann

    Use of multiple digital libraries: a case study Ann Blandford Middlesex University Bounds Green University Bounds Green Road London, N11 2NQ, U.K. +44 20 8362 6905 H.Stelmaszewska @mdx.ac.uk Nick Bryan raised when digital libraries are used in a natural setting. The method used was a protocol analysis

  14. Retrocommissioning Case Study - Applying Building Selection Criteria for Maximum Results

    E-Print Network [OSTI]

    Luskay, L.; Haasl, T.; Irvine, L.; Frey, D.

    2002-01-01T23:59:59.000Z

    RETROCOMMISSIONING CASE STUDY ?Applying Building Selection Criteria for Maximum Results? Larry Luskay, Tudi Haasl, Linda Irvine Portland Energy Conservation, Inc. Portland, Oregon Donald Frey Architectural Energy Corporation Boulder.... The building was retrocommissioned by Portland Energy Conservation, Inc. (PECI), in conjunction with Architectural Energy Corporation (AEC). The building-specific goals were: 1) Obtain cost-effective energy savings from optimizing operation...

  15. Configurable Process Models: Experiences from a Municipality Case Study

    E-Print Network [OSTI]

    van der Aalst, Wil

    Configurable Process Models: Experiences from a Municipality Case Study Florian Gottschalk1 , Teun.larosa@qut.edu.au Abstract. Configurable process models integrate different variants of a business process into a single model. Through configuration users of such models can then combine the variants to derive a process

  16. A CASE STUDY OF THREE OPEN SOURCE SECURITY MANAGEMENT

    E-Print Network [OSTI]

    Zincir-Heywood, Nur

    is not feasible. The objective of this work is therefore to evaluate three open source security management tools TCP dump data generated over five weeks of simulated network traffic in a hypothetical military localA CASE STUDY OF THREE OPEN SOURCE SECURITY MANAGEMENT TOOLS Hilmi Gunes Kayacik, A. Nur Zincir

  17. Hurdling Barriers Through Market Uncertainty: Case Studies in Innovative Technology Adoption

    E-Print Network [OSTI]

    Hurdling Barriers Through Market Uncertainty: Case Studies in Innovative Technology Adoption technologies. This paper examines three case studies of innovative technology adoption: retrofit of time these circumstances as "innovative technology adoption." This paper presents case studies of three innovative

  18. 100-N Area Strontium-90 Treatability Demonstration Project: Phytoextraction Along the 100-N Columbia River Riparian Zone – Field Treatability Study

    SciTech Connect (OSTI)

    Fellows, Robert J.; Fruchter, Jonathan S.; Driver, Crystal J.; Ainsworth, Calvin C.

    2010-01-11T23:59:59.000Z

    Strontium-90 (90Sr) is present both in the aquifer near the river and in the vadose and riparian zones of the river’s shore at 100-NR-2. Phytoextraction of 90Sr is being considered as a potential remediation system along the riparian zone of the Columbia River. Phytoextraction would employ coyote willow (Salix exigua). Past studies have shown that willow roots share uptake mechanisms for Sr with Ca, a plant macronutrient as well as no discrimination between Sr and 90Sr. Willow 90Sr concentration ratios [CR’s; (pCi 90Sr/g dry wt. of new growth tissue)/(pCi 90Sr/g soil porewater)] were consistently greater than 65 with three-quarters of the assimilated label partitioned into the above ground shoot. Insect herbivore experiments also demonstrated no significant potential for bioaccumulation or food chain transfer from their natural activities. The objectives of this field study were three-fold: (1) to demonstrate that a viable, “managed” plot of coyote willows can be established on the shoreline of the Columbia River that would survive the same microenvironment to be encountered at the 100-NR-2 shoreline; (2) to show through engineered barriers that large and small animal herbivores can be prevented from feeding on these plants; and (3) to show that once established, the plants will provide sufficient biomass annually to support the phytoextraction technology. A field treatability demonstration plot was established on the Columbia River shoreline alongside the 100-K West water intake at the end of January 2007. The plot was delimited by a 3.05 m high chain-link fence and was approximately 10 x 25 m in size. A layer of fine mesh metal small animal screening was placed around the plot at the base of the fencing to a depth of 45 cm. A total of sixty plants were placed in six slightly staggered rows with 1-m spacing between plants. The actual plot size was 0.00461 hectare (ha). At the time of planting (March 12, 2007), the plot was located about 10 m from the river’s edge. Less than two weeks later (March 21), the river began the spring rise. Periodic (daily) or continuous flooding occurred at the site over the next 3 to 4 months. River levels at times were over the top of the enclosure’s fence. This same pattern was repeated for the next 2 years. It was however evident that even submerged for part, or all of the day, that the plants continued to flourish. There were no indications of herbivory or animal tracks observed within the plot although animals were present in the area. Biomass production over the three years followed a typical growth curve with a yield of about 1 kg for the first year when the trees were establishing themselves, 4 kg for the second, and over 20 kg for the third when the trees were entering the exponential phase of growth. On a metric Ton per hectare (mT/ha) basis this would be 0.2 mT/ha in 2007, 0.87 mT/ha in 2008, and 4.3 mT/ha in 2009. Growth curve extrapolation predicts 13.2 mT/ha during a fourth year and potentially 29.5 mT/ha following a fifth year. Using the observed Ca and Sr concentrations found in the plant tissues, and Sr CR’s calculated from groundwater analysis, projected biomass yields suggest the trees could prove effective in removing the contaminant from the 100-NR-2 riparian zone.

  19. DOE Zero Energy Ready Home Case Study, BPC Green Builders, Custom...

    Broader source: Energy.gov (indexed) [DOE]

    Fairfield, CT More Documents & Publications DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury, CT DOE Zero Energy Ready Home Case Study: Shore Road Project -...

  20. NASA/FPL Renewable Project Case Study: Space Coast Next Generation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NASAFPL Renewable Project Case Study: Space Coast Next Generation Solar Energy Center NASAFPL Renewable Project Case Study: Space Coast Next Generation Solar Energy Center...

  1. A Successful Case Study of Small Business Energy Efficiency and Demand Response with Communicating Thermostats

    E-Print Network [OSTI]

    Herter, Karen

    2010-01-01T23:59:59.000Z

    Case Study of Small Business Energy Efficiency and DemandCase Study of Small Business Energy Efficiency and DemandSolutions Participant Energy Savings Business Type Program

  2. The effectiveness of simulated robots for supporting the learning of introductory programming: A multi-case case study

    E-Print Network [OSTI]

    Major, L.; Kyriacou, T.; Brereton, P.

    2014-09-30T23:59:59.000Z

    This work investigates the effectiveness of simulated robots as tools to support the learning of programming. After the completion of a Systematic Review and exploratory research a multi-case case study was undertaken. A simulator, named Kebot...

  3. Market diffusion and the effect of demonstrations : a study of the Denver Metro Passive Solar Home program

    E-Print Network [OSTI]

    Lilien, Gary L.

    1981-01-01T23:59:59.000Z

    This paper is a report on the reactions to and effects of the Denver Metro Passive Solar Home demonstration program, conducted in the Spring of 1981. The purpose of the program was to provide impetus to builders for ...

  4. Achieving Learning Objectives through E-Voting Case Studies

    SciTech Connect (OSTI)

    Bishop, Matt; Frincke, Deb

    2007-01-01T23:59:59.000Z

    The recent explosion in the use of electronic voting machines provides a wonderful opportunity to teach students about computer security. Because voting is the cornerstone of any democracy or republic, the need for secure voting systems is obvious. Further, students are familiar with how to vote. But the complexity of mapping a traditional process of voting using secret ballots to an electronic environment shows the difficulties of implementing secure processes and systems. In this article, we show a high level mapping from selected security and privacy education outcomes into a target ‘case study’ of developing electronic voting machines intended for traditional secret ballot elections. Our intent is to motivate both a set of lessons specifically involving e-voting, as well as illustrating the usefulness of having a mapping from outcomes to simplified case studies.

  5. Oxford Area Community School District (Michigan) Bonds Case Study

    Broader source: Energy.gov [DOE]

    Michigan’s Oxford Area Community School District entered into an energy savings performance contract and issued limited tax general obligation bonds to fund the up-front costs of almost $3 million of energy-related improvements. Case study is excerpted from Financing Energy Upgrades for K-12 School Districts: A Guide to Tapping into Funding for Energy Efficiency and Renewable Energy Improvements. Author: Merrian Borgeson and Mark Zimring

  6. Williamson County School District (Tennessee) Bonds Case Study

    Broader source: Energy.gov [DOE]

    Williamson County School District entered into an energy savings performance contract with an energy services company and completed a $5.7 million lease-purchase agreement to fund a range of energy-related improvements across 27 school facilities. Case study is excerpted from Financing Energy Upgrades for K-12 School Districts: A Guide to Tapping into Funding for Energy Efficiency and Renewable Energy Improvements. Author: Merrian Borgeson and Mark Zimring

  7. Enhanced Building Operation Using "Operation Diagnostics" - A Case Study 

    E-Print Network [OSTI]

    Baumann, O.

    2005-01-01T23:59:59.000Z

    ICEBO International Conference for Enhanced Building Operations October 11-13, 2005, Pittsburgh, PA, USA Enhanced Building Operation Using ‘Operation Diagnostics’ – A Case Study Dipl.-Ing. Oliver Baumann Division for Building and System...- ing function implemented in the used visualization tool Pia [4] that enables to select and highlight data interactively in the diagram. Subsequently, numerical analysis gives the possibility to estimate optimization and saving potential...

  8. Market analysis methodology: a utility case study. Final report

    SciTech Connect (OSTI)

    Diamond, M.

    1985-02-01T23:59:59.000Z

    The case study described in this report was conducted as part of EPRI Project RP1634 - Analytic Methods Used Outside the Electric Utility Industry. The primary objectives of the project were to: (1) explore planning and analysis techniques in use outside the utility industry, (2) identify those techniques which show promise for addressing utility issues, and (3) test them in actual utility situations to understand their real value, and the issues associated with adapting them to utility use.

  9. Structured Formal Development in VSE II: The Robertino Case Study

    E-Print Network [OSTI]

    Reif, Wolfgang

    ­of­ freedom and 1/3 scale gantry robot, built for the design validation of the Remote #12; Fig. 1. Robertino: -- It is a Cartesian robot with 4 degrees of freedom (x; y; z; w axes); the w­ axis is for the gripper used to grasp robots in safety critical environments. This case study was used to evaluate the VSE methodol­ ogy

  10. Douglas County School District (Nevada) Bonds Case Study

    Broader source: Energy.gov [DOE]

    Douglas County School District faced a challenging combination of aging equipment and buildings (most over 37 years old), rising energy costs, and limited access to taxpayer funds due to the fiscally-conservative makeup of the region’s voters.. Case study is excerpted from Financing Energy Upgrades for K-12 School Districts: A Guide to Tapping into Funding for Energy Efficiency and Renewable Energy Improvements. Author: Merrian Borgeson and Mark Zimring

  11. Case Study of Continuous Commissioning in an Office Building

    E-Print Network [OSTI]

    Pang, X.; Zheng, B.; Liu, M.

    2006-01-01T23:59:59.000Z

    ICEBO2006, Shenzhen, China Building Commissioning for Energy Efficiency and Comfort, Vol.VI-9-3 Case Study of Continuous Commissioning? in an Office Building Xiufeng Pang Bin Zheng Mingsheng Liu Graduate Student Graduate... Commissioning? Guidebook: Maximize Building Energy Efficiency and Comfort. [2] Dong D, and Mingsheng Liu, 2005. Continuous Commissioning? of a single fan dual duct system in an office building. ICEBO, Pittsburgh, PA. [3] Zheng B, Liu M, and Xiufeng...

  12. Atlanta NAVIGATOR case study. Final report, May 1996--Jun 1997

    SciTech Connect (OSTI)

    Amodei, R.; Bard, E.; Brong, B.; Cahoon, F.; Jasper, K.

    1998-11-01T23:59:59.000Z

    The Atlanta metropolitan region was the location of one of the most ambitious Intelligent Transportation Systems (ITS) deployments in the United States. This deployment included several individual projects--a Central Transportation Management Center (TMC), six Traffic Control Centers (TCC), one Transit Information Center (TIC), the Travel Information Showcase (TIS), and the extension of the Metropolitan Atlanta Rapid Transit Authority (MARTA) rail network and the new high-occupancy vehicle (HOV) lanes on I-85 and I-75. The Atlanta Centennial Olympic Games and Paralympic Games created a focus for these projects. All of these systems were to be brought on line in time for the Olympic Games. This report presents the findings of the NAVIGATOR Case Study and documents the lessons learned from the Atlanta ITS deployment experience in order to improve other ITS deployments in the future. The Case Study focuses on the institutional, programmatic, and technical issues and opportunities from planning and implementing the ITS deployment in Atlanta. The Case Study collected data and information from interviews, observations, focus groups, and documentation reviews. It presents a series of lessons learned and recommendations for enabling successful ITS deployments nationwide.

  13. ITC Case Study 1 ITC Role in US Fuel Cell Projects

    E-Print Network [OSTI]

    ­ Requires 5 year holding period #12;ITC Case Study 6 Monetizing Camp Pendleton ITC $750,000... CampITC Case Study 1 ITC Role in US Fuel Cell Projects Case Study With a DOD Facility Samuel Logan February 19, 2009 MCB Camp Pendleton, CA #12;ITC Case Study 2 Key Project Objectives · Turn-key fixed price

  14. Generating Structurally Complex Test Cases by Data Mutation: A Case Study of Testing an Automated Modelling Tool

    E-Print Network [OSTI]

    Zhu, Hong

    - 1 - Generating Structurally Complex Test Cases by Data Mutation: A Case Study of Testing Brookes University, Oxford OX33 1HX, UK Email: hzhu@brookes.ac.uk ABSTRACT Generation of adequate test cases is difficult and expensive, especially for testing software systems whose input is structurally

  15. Roles and Reusability of Video Data in Social Studies of Interaction. SCARP Case Study No. 5 

    E-Print Network [OSTI]

    Whyte, Angus

    This case study has been produced for the Digital Curation Centre (DCC) SCARP project, funded by the Joint Information Systems Committee (JISC) to investigate disciplinary attitudes and approaches to data deposit. The ...

  16. Stories of the Unheard: A Case Study of Five Mexican American Dropouts Labeled as Demonstrating Learning Disabilities

    E-Print Network [OSTI]

    Villafranca, Darlene 1975-

    2012-11-27T23:59:59.000Z

    APPENDIX F..................................................................................................... 224 APPENDIX G .................................................................................................... 226 APPENDIX H... schools (Appendix H). For instance, the dropout rates for Texas 7th-12th graders in 2010-2011 were as follows: Whites, 16.2%; African American, 20.7%; Mexican American, 60.3%; American Indian, 0.6%; Asian, 1.1%; Pacific Islanders,.1%; Economically...

  17. Impacts of Static Pressure Reset on VAV System Air Leakage, Fan Power and Thermal Energy - Part 2: Case Demonstration for a Typical Climate System

    E-Print Network [OSTI]

    Liu, M.; Zheng, K.; Wu, L.; Wang, Z.; Johnson, C.

    2007-01-01T23:59:59.000Z

    . In this part, a simulated air handling unit (AHU) system in Omaha NE is used to demonstrate the energy savings performance in one typical climate year. This AHU system has a static pressure reset system and two constant static pressure systems, one having...

  18. Ground-source heat pump case studies and utility programs

    SciTech Connect (OSTI)

    Lienau, P.J.; Boyd, T.L.; Rogers, R.L.

    1995-04-01T23:59:59.000Z

    Ground-source heat pump systems are one of the promising new energy technologies that has shown rapid increase in usage over the past ten years in the United States. These systems offer substantial benefits to consumers and utilities in energy (kWh) and demand (kW) savings. The purpose of this study was to determine what existing monitored data was available mainly from electric utilities on heat pump performance, energy savings and demand reduction for residential, school and commercial building applications. In order to verify the performance, information was collected for 253 case studies from mainly utilities throughout the United States. The case studies were compiled into a database. The database was organized into general information, system information, ground system information, system performance, and additional information. Information was developed on the status of demand-side management of ground-source heat pump programs for about 60 electric utility and rural electric cooperatives on marketing, incentive programs, barriers to market penetration, number units installed in service area, and benefits.

  19. An International Review of Eco-City Theory, Indicators, and Case Studies

    E-Print Network [OSTI]

    Zhou, Nan

    2014-01-01T23:59:59.000Z

    downloads/Swedish_district_heating_case-study_(D5)_of the Swedish district heating systems: Critical factorsand waste heat for district heating in the Stockholm case

  20. Micro Level Data Analysis in Continuous Commissioning®: A Case Study

    E-Print Network [OSTI]

    Khan, S.; Bible, M.

    2012-01-01T23:59:59.000Z

    E:\\ICEBO 2012\\1FINAL PAPERS\\22 Anderson CC ICEBO Paper (REV 02 8.10.12).docx Micro Level Data Analysis in Continuous Commissioning?: A Case Study Saleem Khan1 and Mitch Bible1 1 Texas Energy Engineering Services, Inc. 1301 Capital of Texas... of sequential steps such as conducting system measurements, developing a CC? plan, implementing CC? measures, and documenting energy savings and E:\\ICEBO 2012\\1FINAL PAPERS\\22 Anderson CC ICEBO Paper (REV 02 8.10.12).docx comfort improvements (Claridge et al...

  1. Water Savings in Food Processing Plants - Potentials and Case Studies 

    E-Print Network [OSTI]

    Trueblood, A; Ritchie, M.; Chow, S.; Ganji, A.

    2015-01-01T23:59:59.000Z

    , Inc. All rights reserved. WATER AND EMBEDDED ENERGY CONSERVATION IN THE INDUSTRIAL SECTOR – POTENTIALS AND CASE STUDIES Alexander Trueblood, P.E. Sandra Chow, P.E. Mark Ritchie, P.E. Ahmad R. Ganji, Ph.D., P.E. Mechanical Engineer Senior Mechanical... June 2-5, 2015 ABSTRACT There is a rising national and statewide concern in the relationship between energy and water usage, especially in California. The drought in California has resulted in more focused attention to water savings and the associated...

  2. The Industry Coupled Case Study Program final report

    SciTech Connect (OSTI)

    Stringfellow, J. [ed.

    1982-10-01T23:59:59.000Z

    The Industry Coupled Case Study Program was conceived as a short-term cooperative program between the Federal government and private industry. Federal funds were committed to stimulate geothermal exploration and development between 1977 and 1979, although some work under the program continues into 1982. Federal funding has been phased out and the remaining information developed during the program is being disseminated and reported. This report presents an overview of the program and documents the technical results and open-file data base resulting from the program.

  3. Case study field evaluation of a systems approach to retrofitting a residential HVAC system

    SciTech Connect (OSTI)

    Walker, Iain S.; McWiliams, Jennifer A.; Konopacki, Steven J.

    2003-09-01T23:59:59.000Z

    This case study focusing on a residence in northern California was undertaken as a demonstration of the potential of a systems approach to HVAC retrofits. The systems approach means that other retrofits that can affect the HVAC system are also considered. For example, added building envelope insulation reduces building loads so that smaller capacity HVAC system can be used. Secondly, we wanted to examine the practical issues and interactions with contractors and code officials required to accomplish the systems approach because it represents a departure from current practice. We identified problems in the processes of communication and installation of the retrofit that led to compromises in the final energy efficiency of the HVAC system. These issues must be overcome in order for HVAC retrofits to deliver the increased performance that they promise. The experience gained in this case study was used to optimize best practices guidelines for contractors (Walker 2003) that include building diagnostics and checklists as tools to assist in ensuring the energy efficiency of ''house as a system'' HVAC retrofits. The best practices guidelines proved to be an excellent tool for evaluating the eight existing homes in this study, and we received positive feedback from many potential users who reviewed and used them. In addition, we were able to substantially improve the energy efficiency of the retrofitted case study house by adding envelope insulation, a more efficient furnace and air conditioner, an economizer and by reducing duct leakage.

  4. Revisiting the Steam-Boiler Case Study with LUTESS : Modeling for Automatic Test Generation

    E-Print Network [OSTI]

    Boyer, Edmond

    Revisiting the Steam-Boiler Case Study with LUTESS : Modeling for Automatic Test Generation. In this paper, we apply this modeling principle to a well known case study, the steam boiler problem which has model and to assess the difficulty of such a process in a realistic case study. The steam boiler case

  5. Diagnosis of condensation-induced waterhammer: Case studies

    SciTech Connect (OSTI)

    Izenson, M.G.; Rothe, P.H.; Wallis, G.B.

    1988-10-01T23:59:59.000Z

    This guidebook provides reference material and diagnostic procedures concerning condensation-induced waterhammer in nuclear power plants. Condensation-induced waterhammer is the most damaging form of waterhammer, and its diagnosis is complicated by the complex nature of the underlying phenomena. In Volume 1, the guidebook groups condensation-induced waterhammers into five event classes which have similar phenomena and levels of damage. Diagnostic guidelines focus on locating the event center where condensation and slug acceleration take place. Diagnosis is described in three stages: an initial assessment, detailed evaluation and final confirmation. Graphical scoping analyses are provided to evaluate whether an event from one of the event classes could have occurred at the event center. Examples are provided for each type of waterhammer. Special instructions are provided for walking down damaged piping and evaluating damage due to waterhammer. To illustrate the diagnostic methods and document past experience, six case studies have been compiled in Volume 2. These case studies, based on actual condensation-induced waterhammer events at nuclear plants, present detailed data and work through the event diagnosis using the tools introduced in the first volume. 20 refs., 21 figs., 6 tabs.

  6. Accepted to Combustion and Flame Feb. 11, 2004 Demonstration of a Free-Piston Rapid Compression Facility for the Study of High

    E-Print Network [OSTI]

    Wooldridge, Margaret S.

    Accepted to Combustion and Flame Feb. 11, 2004 Demonstration of a Free-Piston Rapid Compression Facility for the Study of High Temperature Combustion Phenomena M. T. Donovan, X. He, B. T. Zigler, T. R developed at the University of Michigan (UM) for use in studying high-temperature combustion phenomena

  7. Making the Case For Safe Storage of Used Nuclear Fuel For Extended Periods of Time: Combining Near-Term Experiments and Analyses with Longer-Term Confirmatory Demonstrations

    SciTech Connect (OSTI)

    Sorenson, Ken B.; Hanson, Brady D.

    2013-08-25T23:59:59.000Z

    The need for extended storage of used nuclear fuel is increasing globally as disposition schedules for used fuel are pushed further into the future. This is creating a situation where dry storage of used fuel may need to be extended beyond normal regulatory licensing periods. While it is generally accepted that used fuel in dry storage will remain in a safe condition, there is little data that demonstrate used fuel performance in dry storage environments for long periods of time. This is especially true for high burnup used fuel.

  8. Studies of the Micro-Bacillus of Acne and Clinical Studies of Cases Treated by Vaccines

    E-Print Network [OSTI]

    Hecker, Friedrich A.

    1911-01-01T23:59:59.000Z

    KU ScholarWorks | The University of Kansas Pre-1923 Dissertations and Theses Collection Studies of the Micro-Bacillus of Acne and Clinical Studies of Cases Treated by Vaccines 1911 by Friedrich A. Hecker This work was digitized by the Scholarly...

  9. Commercializing government-sponsored innovations: Twelve successful buildings case studies

    SciTech Connect (OSTI)

    Brown, M.A.; Berry, L.G.; Goel, R.K.

    1989-01-01T23:59:59.000Z

    This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies. 27 refs., 21 figs., 4 tabs.

  10. Study plan for conducting a section 316(a) demonstration: K-Reactor cooling tower, Savannah River Site

    SciTech Connect (OSTI)

    Paller, M.H.

    1991-02-01T23:59:59.000Z

    The K Reactor at the Savannah River Site (SRS) began operation in 1954. The K-Reactor pumped secondary cooling water from the Savannah River and discharged directly to the Indian Grave Branch, a tributary of Pen Branch which flows to the Savannah River. During earlier operations, the temperature and discharge rates of cooling water from the K-reactor were up to approximately 70{degree}C and 400 cfs, substantially altering the thermal and flow regimes of this stream. These discharges resulted in adverse impacts to the receiving stream and wetlands along the receiving stream. As a component of a Consent Order (84-4-W as amended) with the South Carolina Department of Health and Environmental Control, the Department of Energy (DOE) evaluated the alternatives for cooling thermal effluents from K Reactor and concluded that a natural draft recirculating cooling tower should be constructed. The cooling tower will mitigate thermal and flow factors that resulted in the previous impacts to the Indian Grave/Pen Branch ecosystem. The purpose of the proposed biological monitoring program is to provide information that will support a Section 316(a) Demonstration for Indian Grave Branch and Pen Branch when K-Reactor is operated with the recirculating cooling tower. The data will be used to determine that Indian Grave Branch and Pen Branch support Balanced Indigenous Communities when K-Reactor is operated with a recirculating cooling tower. 4 refs., 1 fig. 1 tab.

  11. THE HAITI CASE STUDY Working Paper of the collaborative NATO-Harvard project

    E-Print Network [OSTI]

    Mootha, Vamsi K.

    1 THE HAITI CASE STUDY Working Paper of the collaborative NATO-Harvard project: TOWARDS THE HAITI CASE STUDY Working Paper of the collaborative NATO-Harvard project: Towards a Comprehensive;THE HAITI CASE STUDY 27 June 2012 FOREWORD A joint study team from NATO's Joint Analysis and Lessons

  12. NREL Case Study Leads to International Partnership (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-12-01T23:59:59.000Z

    In 2012, NREL analysts produced a case study, "Integrating Variable Renewable Energy in Electric Power Markets: Best Practices from International Experience," which drew upon dozens of interviews with international experts involved in crafting effective policies and markets. The report proposed a cross-cutting initiative to transform the world's power systems by implementing two complementary strategies: the large?scale deployment of renewable energy, and a combination of comprehensive energy efficiency and smarter grids. This recommendation led to the launch of the 21st Century Power Partnership in April 2012, and its membership has since grown to include Denmark, Finland, Germany, India, Mexico, Spain, and the United States. NREL, together with its affiliated Joint Institute for Strategic Energy Analysis, are the operating agents.

  13. Cold-Climate Case Study for Affordable Zero Energy Homes

    SciTech Connect (OSTI)

    Norton, P.; Christensen, C.

    2006-01-01T23:59:59.000Z

    This project, supported by the U.S. Department of Energy's Building America Program, is a case study in reaching zero energy within the affordable housing sector in cold climates. The design of the 1200 square foot, 3-bedroom Denver zero energy home carefully combines envelope efficiency, efficient equipment, appliances and lighting, and passive and active solar features to reach the zero energy goal. The home was designed using an early version of the BEOpt building optimization software with additional analysis using DOE2. This engineering approach was tempered by regular discussions with Habitat construction staff and volunteers. These discussions weighed the applicability of the optimized solutions to the special needs and economics of a Habitat house--moving the design towards simple, easily maintained mechanical systems and volunteer-friendly construction techniques.

  14. Electricity generation and environmental externalities: Case studies, September 1995

    SciTech Connect (OSTI)

    NONE

    1995-09-28T23:59:59.000Z

    Electricity constitutes a critical input in sustaining the Nation`s economic growth and development and the well-being of its inhabitants. However, there are byproducts of electricity production that have an undesirable effect on the environment. Most of these are emissions introduced by the combustion of fossil fuels, which accounts for nearly 70 percent of the total electricity generated in the United States. The environmental impacts (or damages) caused by these emissions are labeled environmental ``externalities.`` Included in the generic term ``externality`` are benefits or costs resulting as an unintended byproduct of an economic activity that accrue to someone other than the parties involved in the activity. This report provides an overview of the economic foundation of externalities, the Federal and State regulatory approaches, and case studies of the impacts of the externality policies adopted by three States.

  15. Production and Application of Biodiesel – A Case Study

    E-Print Network [OSTI]

    unknown authors

    Abstract––The true fact that everyone has to accept for search of alternative fuels apart from petroleum products is biodiesel for many reasons, mainly increasing demand and scarcity of petroleum products and to preserve the wealth of nature to be used for coming generations. The reason of non implementation of biodiesel in day-to-day life is because of few limitations. Many scientists are in progress for a new dimension of research in biodiesel plantation, cultivation and its usage in engines. This paper highlights the importance of biodiesel production techniques such as supercritical methanolysis, ultrasonication method and microwave technique by which maximum biodiesel can be produced. The new approach of using nano particle in biodiesel shows very good results in reducing the level of pollutant gases in the engine exhaust and increased performance without any engine modification is also discussed briefly in this case study. Keywords––Hydrodeoxygeneration, nano particle, ultrasonication, microwave technique I.

  16. New Technology Demonstration Program

    E-Print Network [OSTI]

    New Technology Demonstration Program Technical Brief FEMPFederal Energy Management Program Tom for saving energy in refrigerated walk-in coolers, and to evaluate the potential for this technology in Federal facilities. The focus of this study was on a single manufacturer of the technology, Nevada Energy

  17. Demonstration Assessment of Light-Emitting Diode (LED) Freezer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting This document is a report...

  18. Case Studies of Systems Integration through Energy Simulation During Early Design Phase

    E-Print Network [OSTI]

    Upadhyaya, K.; McLean, D.

    The paper presents two case studies, a commercial & a community project, in Houston Texas, where energy simulation and a decision matrix were used to solve budget conflicts and meet LEED EA-1 requirements. The first case study consists...

  19. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury...

    Energy Savers [EERE]

    BPC Green Builders, Danbury, CT DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury, CT Case study of a DOE Zero Energy Ready home in Danbury, CT, that scored HERS...

  20. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque...

    Energy Savers [EERE]

    Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM Case study of a New Mexico-based home builder who has built more DOE Zero Energy Ready certified homes than...

  1. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver...

    Energy Savers [EERE]

    New Town Builders, Denver, CO, Production Home DOE Zero Energy Ready Home Case Study: New Town Builders, Denver, CO, Production Home Case study of a DOE Zero Energy Ready Home in...

  2. DOE Zero Energy Ready Home Case Study: Palo Duro Homes Inc.,...

    Energy Savers [EERE]

    Palo Duro Homes Inc., Albuquerque, NM, Production DOE Zero Energy Ready Home Case Study: Palo Duro Homes Inc., Albuquerque, NM, Production Case study of a DOE Zero Energy Ready...

  3. DOE Zero Energy Ready Home Case Study: KB Home, San Marcos, CA...

    Energy Savers [EERE]

    KB Home, San Marcos, CA, Production Home DOE Zero Energy Ready Home Case Study: KB Home, San Marcos, CA, Production Home Case study of a DOE Zero Energy Ready Home in San Marcos,...

  4. Case study data base companion report 3 to simulation of geothermal subsidence (LBL-10571)

    SciTech Connect (OSTI)

    Miller, I.; Dershowitz, W.; Jones, K.; Myer, L.; Roman, K.; Schauer, M.

    1980-03-01T23:59:59.000Z

    The data base developed for selection and evaluation of geothermal subsidence case studies is presented. Data from this data base were used in case studies of Wairakei, The Geysers, and Austin Bayou Prospect (Report LBL 10571).

  5. Case Study: Fuel Cells Provide Combined Heat and Power at Verizon...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Provide Combined Heat and Power at Verizon's Garden Central Office Case Study: Fuel Cells Provide Combined Heat and Power at Verizon's Garden Central Office This is a case study...

  6. Case Study: Ebus Hybrid Electric Buses and Trolleys

    SciTech Connect (OSTI)

    Barnitt, R.

    2006-07-01T23:59:59.000Z

    Evaluation focuses on the demonstration of hybrid electric buses and trolleys produced by Ebus Inc. at the Indianapolis Transportation Corporation and the Knoxville Area Transit.

  7. Energy conserving site design case study: Shenandoah, Georgia. Final report

    SciTech Connect (OSTI)

    Not Available

    1980-01-01T23:59:59.000Z

    The case study examines the means by which energy conservation can be achieved at an aggregate community level by using proper planning and analytical techniques for a new town, Shenandoah, Georgia, located twenty-five miles southwest of Atlanta's Hartsfield International Airport. A potentially implementable energy conservation community plan is achieved by a study team examining the land use options, siting characteristics of each building type, alternate infrastructure plans, possible decentralized energy options, and central utility schemes to determine how community energy conservation can be achieved by use of pre-construction planning. The concept for the development of mixed land uses as a passively sited, energy conserving community is based on a plan (Level 1 Plan) that uses the natural site characteristics, maximizes on passive energy siting requirement, and allows flexibility for the changing needs of the developers. The Level 2 Plan is identical with Level 1 plan plus a series of decentraized systems that have been added to the residential units: the single-family detached, the apartments, and the townhouses. Level 3 Plan is similar to the Level 1 Plan except that higher density dwellings have been moved to areas adjacent to central site. The total energy savings for each plan relative to the conventional plan are indicated. (MCW)

  8. Hearing Nano-Structures: A Case Study in Timbral Sonification

    SciTech Connect (OSTI)

    Schedel, M.; Yager, K.

    2012-06-18T23:59:59.000Z

    We explore the sonification of x-ray scattering data, which are two-dimensional arrays of intensity whose meaning is obscure and non-intuitive. Direct mapping of the experimental data into sound is found to produce timbral sonifications that, while sacrificing conventional aesthetic appeal, provide a rich auditory landscape for exploration. We discuss the optimization of sonification variables, and speculate on potential real-world applications. We have presented a case study of sonifying x-ray scattering data. Direct mapping of the two-dimensional intensity values of a scattering dataset into the two-dimensional matrix of a sonogram is a natural and information-preserving operation that creates rich sounds. Our work supports the notion that many problems in understanding rather abstract scientific datasets can be ameliorated by adding the auditory modality of sonification. We further emphasize that sonification need not be limited to time-series data: any data matrix is amenable. Timbral sonification is less obviously aesthetic, than tonal sonification, which generate melody, harmony, or rhythm. However these musical sonifications necessarily sacrifice information content for beauty. Timbral sonification is useful because the entire dataset is represented. Non-musicians can understand the data through the overall color of the sound; audio experts can extract more detailed insight by studying all the features of the sound.

  9. Interdependencies of Electricity Markets with Gas Markets A Case Study of Transmission System Operators

    E-Print Network [OSTI]

    Dixon, Juan

    1 Interdependencies of Electricity Markets with Gas Markets ­ A Case Study of Transmission System and regulatory intervention. Three generic Case Studies of countries belonging to the Americas are discussed Case Studies (Latin America; Canada and the USA). 2. 1. Latin America The primary challenge for Latin

  10. aquifers case study: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    supported by WebCASE Xinyu Zhang; Nianlong Luo; Qixin Liu 395 Spatial and temporal controls on biogeochemical indicators at the small-scale interface between a contaminated...

  11. Water Efficiency Improvements at Various Environmental Protection Agency Sites: Best Management Practice Case Study #12 - Laboratory/Medical Equipment (Brochure)

    SciTech Connect (OSTI)

    Blakley, H.

    2011-03-01T23:59:59.000Z

    The U.S. Environmental Protection Agency (EPA) built a successful water conservation program and reduced potable water use through a series of initiatives at EPA laboratories. The projects highlighted in this case study demonstrate EPA's ability to reduce water use in laboratory and medical equipment by implementing vacuum pump and steam sterilizer replacements and retrofits. Due to the success of the initial vacuum pump and steam sterilizer projects described here, EPA is implementing similar projects at several laboratories throughout the nation.

  12. Perform Thermodynamics Measurements on Fuel Cycle Case Study Systems

    SciTech Connect (OSTI)

    Leigh R. Martin

    2014-09-01T23:59:59.000Z

    This document was prepared to meet FCR&D level 3 milestone M3FT-14IN0304022, “Perform Thermodynamics Measurements on Fuel Cycle Case Study Systems.” This work was carried out under the auspices of the Thermodynamics and Kinetics FCR&D work package. This document reports preliminary work in support of determining the thermodynamic parameters for the ALSEP process. The ALSEP process is a mixed extractant system comprised of a cation exchanger 2-ethylhexyl-phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and a neutral solvating extractant N,N,N’,N’-tetraoctyldiglycolamide (TODGA). The extractant combination produces complex organic phase chemistry that is challenging for traditional measurement techniques. To neutralize the complexity, temperature dependent solvent extraction experiments were conducted with neat TODGA and scaled down concentrations of the ALSEP formulation to determine the enthalpies of extraction for the two conditions. A full set of thermodynamic data for Eu, Am, and Cm extraction by TODGA from 3.0 M HNO3 is reported. These data are compared to previous extraction results from a 1.0 M HNO3 aqueous medium, and a short discussion of the mixed HEH[EHP]/TODGA system results is offered.

  13. Data access in a heterogeneous environment: Case study

    SciTech Connect (OSTI)

    Gencer, S.; Mosher, D.J.; Shields, R.S. [Mobil E and P Technical Center, Dallas, TX (United States); Sciretta, R.P. [Mobil New Business Development Group, Dallas, TX (United States); Tidemann, T.K. [Mobil Exploration, Stavanger (Norway)

    1994-12-31T23:59:59.000Z

    A pilot test was recently completed at Mobil`s Dallas offices to validate the capabilities of a commercially available set of rapid development tools. The object of the pilot was to build a system for the simultaneous access of E and P data from a variety of networked database systems on various hardware platforms utilizing PC frontends. The test involved Mobil technical support and business unit personnel working with Hewlett Packard implementation specialists familiar with the Open Environment Corporation development tools. The case study involved building a system to permit general access to the following data sources commonly used within one of Mobil`s business units; CARS (an indexing system residing on IBM tapes), RIM (an indexing system residing on a VAX cluster), and a Technical Library database (library listings residing on a MicroVAX). The test was completed in two phases over a seven week period involving 20 person/days of HP development effort. Mobil personnel commitment was comparable consisting of data administration tasks, conversion of the CARS system to a relational implementation, and development of VAX based server systems. The Pilot Test was considered successful and achieved basic data access functionality. The system provided a uniform user frontend and reduced search time from days to minutes for the data sources targeted. The technique and tools used in the test facilitated rapid developments of value added resources for the geoscientist.

  14. DOE Zero Energy Ready Home Case Study, Nexus EnergyHomes, Frederick...

    Energy Savers [EERE]

    Study, Nexus EnergyHomes, Frederick, MD, Production DOE Zero Energy Ready Home Case Study, Nexus EnergyHomes, Frederick, MD, Production This urban infill community features a...

  15. Case Study: Iran, Islam, the NPT, and the Bomb

    SciTech Connect (OSTI)

    Saunders, E .

    2011-04-01T23:59:59.000Z

    The goals of this case study are: (1) To examine the correlation between Iran's nuclear program and clerical statements; (2) To evaluate the importance of these statements; (3) To understand the relationship between policy and fatwas (Islamic decrees); (4) To address the issue of a 'nuclear fatwa'; and (5) To examine how, if at all, Sharia (Islamic law) has influenced Iran's actions or inactions with respect to the Non-Proliferation Treaty (NPT), the International Atomic Energy Agency (IAEA), and Iran's adherence to its IAEA Safeguards Agreements and the Additional Protocol. The Islamic Republic of Iran (hereinafter Iran) is one of two theocracies in the world, the second being Vatican City. Iran's government derives its constitutional, moral, and political legitimacy from Islam. As a result of this theocratic culture, rules are set and interpreted with a much different calibrator than that of the Western world. Islam affects all aspects of Iranian life. This is further complicated by the fact that Islam is not a nationalistic faith, in that many people all over the world believe in and adhere to Islamic principles. As a result, a political system that derives much of its fervor from being nationalistic is caught between two worlds, one within the land boundaries of Iran and the other within a faith that transcends boundaries. Thus, any understanding of Islamic law must first be understood within this delicate balance of nationalism and transcendence. Iran has found itself on the international stage concerning its nuclear program. Because Iran is a theocratic state, it is imperative to examine its political moves, speeches, rights, and obligations through the lens of Islam. This study will examine how Islam plays a role in Iran's dealing with the International Atomic Energy Agency (IAEA), its understanding of the Nuclear Non-Proliferation Treaty (NPT), including parties obligations under Safeguards Agreements and the Additional Protocol, and also provide a recommendation on how to move forward in dealings with Iran based in part on an understanding of Islamic principles.

  16. People and Forests: a case study from Benin, West Africa

    E-Print Network [OSTI]

    Kraus, Erika Beth

    2012-05-31T23:59:59.000Z

    The purpose of this work is to demonstrate how sacred forests in Benin, West Africa, contribute to forest conservation. Local use of natural resources is well-practiced in maintaining wooded space; the same use of those ...

  17. DOE Zero Energy Ready Home Case Study: Cobblestone Homes, Midland...

    Broader source: Energy.gov (indexed) [DOE]

    in Midland, MI, that scored HERS 49 without PV or HERS 44 with 1.4 kW of PV. The custom home served as a prototype and energy efficiency demonstration model while performance...

  18. Cultural Heritage in the Crosshairs: Protecting Cultural Property during Conflict provides case studies of Cultural

    E-Print Network [OSTI]

    by participating nations. This volume provides a series of case studies and "lessons learned" to assess the current" by Michael Hallett Chapter 9: "A Case Study in Cultural Heritage Protection in a Time of War" by CPT BenjaminCultural Heritage in the Crosshairs: Protecting Cultural Property during Conflict provides case

  19. Building America Zero Energy Ready Home Case Study: Imery Group...

    Broader source: Energy.gov (indexed) [DOE]

    wall, spray foamed walls and attic plus rigid foam and coated OSB. The Imery Group: Proud Green Home - Serenbe, GA More Documents & Publications DOE Zero Energy Ready Home Case...

  20. Understanding urban housing transformations : a case study of Bhogal, India

    E-Print Network [OSTI]

    Benjamin, Solomon J., 1960-

    1985-01-01T23:59:59.000Z

    This thesis attempts to describe dwelling transformations in the case of Bhogal, New Delhi. It is hoped to clarify the links between socio-economic forces and their resultant impact on physical form, through its transformation. ...

  1. Computers at home, new spatial needs? : a case study

    E-Print Network [OSTI]

    Franco, Adriana

    1982-01-01T23:59:59.000Z

    This thesis investigates five families in Boston who have introduced computers into their homes. The analysis is interdisciplinary and each case has been considered in terms of psycho-social and architectural terms. The ...

  2. Creativity, the City & the University A Case Study of Collaboration between

    E-Print Network [OSTI]

    O'Mahony, Donal E.

    Economy objectives. A Smart Economywillbemostsuccessfullyachieved and sustained through a knowledge cityCreativity, the City & the University A Case Study of Collaboration between Trinity College Dublin & some nearby Cultural Institutions Johanna Archbold #12;Creativity, the City & the University A Case

  3. Integrating Nuclear Energy to Oilfield Operations – Two Case Studies

    SciTech Connect (OSTI)

    Eric P. Robertson; Lee O. Nelson; Michael G. McKellar; Anastasia M. Gandrik; Mike W. Patterson

    2011-11-01T23:59:59.000Z

    Fossil fuel resources that require large energy inputs for extraction, such as the Canadian oil sands and the Green River oil shale resource in the western USA, could benefit from the use of nuclear power instead of power generated by natural gas combustion. This paper discusses the technical and economic aspects of integrating nuclear energy with oil sands operations and the development of oil shale resources. A high temperature gas reactor (HTGR) that produces heat in the form of high pressure steam (no electricity production) was selected as the nuclear power source for both fossil fuel resources. Both cases were based on 50,000 bbl/day output. The oil sands case was a steam-assisted, gravity-drainage (SAGD) operation located in the Canadian oil sands belt. The oil shale development was an in-situ oil shale retorting operation located in western Colorado, USA. The technical feasibility of the integrating nuclear power was assessed. The economic feasibility of each case was evaluated using a discounted cash flow, rate of return analysis. Integrating an HTGR to both the SAGD oil sands operation and the oil shale development was found to be technically feasible for both cases. In the oil sands case, integrating an HTGR eliminated natural gas combustion and associated CO2 emissions, although there were still some emissions associated with imported electrical power. In the in situ oil shale case, integrating an HTGR reduced CO2 emissions by 88% and increased natural gas production by 100%. Economic viabilities of both nuclear integrated cases were poorer than the non-nuclear-integrated cases when CO2 emissions were not taxed. However, taxing the CO2 emissions had a significant effect on the economics of the non-nuclear base cases, bringing them in line with the economics of the nuclear-integrated cases. As we move toward limiting CO2 emissions, integrating non-CO2-emitting energy sources to the development of energy-intense fossil fuel resources is becoming increasingly important. This paper attempts to reduce the barriers that have traditionally separated fossil fuel development and application of nuclear power and to promote serious discussion of ideas about hybrid energy systems.

  4. Demonstration Assessment of LED Freezer Case Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No53197 This

  5. Pratt & Whtiney: Homogenous Metals,Inc. (HMI) Case Study: A Case STudy of the UTC Ace Operating System

    E-Print Network [OSTI]

    Roth, George

    2009-10-06T23:59:59.000Z

    Homogenous Metals Incorporated (HMI) is a pioneer in adopting and demonstrating value from United Technology Corporation's (UTC's) ACE operating system. ACE stands for Achieving Competitive Excellence. The first story is ...

  6. Engineering Study for a Full Scale Demonstration of Steam Reforming Black Liquor Gasification at Georgia-Pacific's Mill in Big Island, Virginia

    SciTech Connect (OSTI)

    Robert De Carrera; Mike Ohl

    2002-03-19T23:59:59.000Z

    Georgia-Pacific Corporation performed an engineering study to determine the feasibility of installing a full-scale demonstration project of steam reforming black liquor chemical recovery at Georgia-Pacific's mill in Big Island, Virginia. The technology considered was the Pulse Enhanced Steam Reforming technology that was developed and patented by Manufacturing and Technology Conversion, International (MTCI) and is currently licensed to StoneChem, Inc., for use in North America. Pilot studies of steam reforming have been carried out on a 25-ton per day reformer at Inland Container's Ontario, California mill and on a 50-ton per day unit at Weyerhaeuser's New Bern, North Carolina mill.

  7. Recurrent Shocks, Poverty Traps and the Degradation of the Social Capital Base of Pastoralism: A Case Study from Southern Ethiopia

    E-Print Network [OSTI]

    Berhanu, Wassie

    2009-01-01T23:59:59.000Z

    A Case Study from Southern Ethiopia. Wassie Berhanu AddisCase Study from Southern Ethiopia. CEGA Working Paper SeriesA Case Study from Southern Ethiopia. Journal of Development

  8. Case Study: Near Zero Maine Home II | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO OverviewAttachments EnergyFebruary 29CNGCAMPAIGNING ACTIVITIESTradeCarolineCasaCase No.Case

  9. Technology Demonstration Partnership Policy

    Broader source: Energy.gov [DOE]

    This City Council memorandum establishes a framework for engaging in and evaluating demonstration partnerships with the goal of developing, testing, and demonstrating emerging technologies, product, and service innovations.

  10. The Woodlands Metro Center energy study. Case studies of project planning and design for energy conservation

    SciTech Connect (OSTI)

    Not Available

    1980-03-01T23:59:59.000Z

    The Woodlands is a HUD Title VII New Town located near Houston, including 22,000 acres; the plan for the new town consists of 6 residential villages, a town center (Metro), and a Trade Center for larger-scale industrial use. Included within the program for each village are schools and commercial activities, as well as employment activities. The Woodlands is planned to be developed over a 26-year period (commenced in 1972) with an ultimate population of 150,000. Following a summary chapter, Chapter II presents background material on The Woodlands and results of the study are summarized. Chapter III describes the project team and its organizational structure. Chapter IV outlines and documents the methodology that was employed in developing, analyzing, and evaluating the case study. The next chapter describes and analyzes the conventional plan, documents the process by which energy-conserving methods were selected, and evaluates the application of these methods to the Metro Center Study area. Chapter VI discusses constraints to implementation and is followed by a final chapter that presents the general conclusions from the case study and suggests directions for further investigation.

  11. Case study on the US superconducting power transmission program

    SciTech Connect (OSTI)

    Hammel, E.F.

    1996-02-01T23:59:59.000Z

    After the 1911 discovery of superconductivity (the abrupt loss of electrical resistance in certain materials at very low temperatures), attempts were made to make practical use of this phenomenon. Initially these attempts failed, but in the early 1960s (after 50 years of research) they succeeded. By then, the projected growth in the production and consumption of electrical energy required much higher capacity power transmission capabilities than were available or likely to become available from incremental improvements in existing transmission technology. Since superconductors were capable in principle of transmitting huge amounts of power, research programs to develop and demonstrate superconducting transmission lines were initiated in the US and abroad. The history of the US program, including the participants, their objectives, funding and progress made, is outlined. Since the R&D program was terminated before the technology was completely demonstrated, the reasons for and consequences of this action are discussed in a final section.

  12. Supplemental Simulation Case Studies of Dynamic Evaporator Modeling Paradigms with Variable Fluid Phases 

    E-Print Network [OSTI]

    Rodriguez, E.; Rasmussen, B.

    2015-01-01T23:59:59.000Z

    1Supplemental Simulation Case Studies of Dynamic Evaporator Modeling Paradigms with Variable Fluid Phases Erik Rodriguez1, Bryan Rasmussen2 The purpose of this document is to present a multitude of case studies comparing evaporator modeling... which uses two-phase region density to trigger mass conservative switching. Nine case studies are performed through a combination of three different refrigerants, three different physical system parameters, and three different operating conditions...

  13. Arsenic Methylation and Bladder Cancer Risk in CaseControl Studies in Argentina and the

    E-Print Network [OSTI]

    California at Berkeley, University of

    Arsenic Methylation and Bladder Cancer Risk in Case­Control Studies in Argentina and the United's susceptibility to bladder cancer. Methods: Urinary methylation products were measured in subjects from Argentina (114 cases and 114 controls) and the United States (23 cases and 49 controls). Results: In Argentina

  14. Wind Turbine Selection: A case-study for Brfell, Iceland Samuel Perkin

    E-Print Network [OSTI]

    Karlsson, Brynjar

    Wind Turbine Selection: A case-study for BĂşrfell, Iceland by Samuel Perkin 60 ECTS Thesis Master of Science in Sustainable Energy Engineering January 2014 #12;Wind Turbine Selection: A case: Magnus Ă?Ăłr JĂłnsson, Examiner Professor, University of Iceland, Iceland #12;Wind Turbine Selection: A case

  15. How do Distribution and Time Zones affect Software Development? A Case Study on

    E-Print Network [OSTI]

    Meyer, Bertrand

    How do Distribution and Time Zones affect Software Development? A Case Study on Communication local developments to geographically distributed projects. This paper presents a case study analyzing the effect of distribution and time zones on com- munication in distributed projects. The study was performed

  16. Topographic control of asynchronous glacial advances: A case study from Annapurna, Nepal

    E-Print Network [OSTI]

    Heimsath, Arjun M.

    Topographic control of asynchronous glacial advances: A case study from Annapurna, Nepal Beth Pratt of asynchronous glacial advances: A case study from Annapurna, Nepal, Geophys. Res. Lett., 38, L24502, doi:10 10 Be dating [Zech et al., 2009]. Further east in Nepal, other glacial dating studies [Finkel et al

  17. Webinar: Guidance for Filling Out a Detailed H2A Production Case Study

    Broader source: Energy.gov [DOE]

    Video recording and text version of the webinar titled, Guidance for Filling Out a Detailed H2A Production Case Study, originally presented on July 9, 2013.

  18. Text-Alternative Version: MSSLC Member Case Studies- LED Street Lighting Programs Webinar

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "MSSLC Member Case Studies - LED Street Lighting Programs" webcast, held May 8, 2013.

  19. DOE Zero Energy Ready Home Case Study: BPC Green Builders, Danbury...

    Broader source: Energy.gov (indexed) [DOE]

    BPC Green Builders: Trolle Residence - Danbury, CT More Documents & Publications DOE Zero Energy Ready Home Case Study, BPC Green Builders, Custom Home, New Fairfield, CT DOE Zero...

  20. Case Study: Fuel Cells Increase Reliability at First National Bank of Omaha

    Fuel Cell Technologies Publication and Product Library (EERE)

    A case study of the First National Bank of Omaha fuel cell system, covering 1999 through October 2009. The system reduced heating bills by more than $1 million.

  1. Case Studies from the Climate Technology Partnership: Landfill Gas Projects in South Korea and Lessons Learned

    SciTech Connect (OSTI)

    Larney, C.; Heil, M.; Ha, G. A.

    2006-12-01T23:59:59.000Z

    This paper examines landfill gas projects in South Korea. Two case studies provide concrete examples of lessons learned and offer practical guidance for future projects.

  2. Case Study of the Application of a Modified Method to Measure Global Solar Irradiance

    SciTech Connect (OSTI)

    Rael, F. P.

    2006-02-01T23:59:59.000Z

    Case study that examines the application of a pyranometer responsivity function to data from 23 measurement stations in the Southern Great Plains.

  3. Stream restoration case studies in North Carolina utilizing natural channel design techniques

    E-Print Network [OSTI]

    Harman, William A.; Jennings, Gregory D.

    2001-01-01T23:59:59.000Z

    CA. Federal Interagency Stream Restoration Working Group (STREAM RESTORATION CASE STUDIES IN NORTH CAROLINA UTILIZINGand streambanks. Stream restoration options for incised

  4. Innovation, renewable energy, and state investment: Case studies of leading clean energy funds

    E-Print Network [OSTI]

    Wiser, Ryan; Bolinger, Mark; Milford, Lewis; Porter, Kevin; Clark, Roger

    2002-01-01T23:59:59.000Z

    and renewable energy investments, as well as clean energyState Investment: Case Studies of Leading Clean Energy Fundsfor renewable energy investments. These clean energy funds

  5. Environmental Challenges of Climate-Nuclear Fusion: A Case Study of India

    E-Print Network [OSTI]

    Badrinarayan, Deepa

    2011-01-01T23:59:59.000Z

    Challenges of Climate- Nuclear Fusion: A Case Study of Indiatext. CHALLENGES OF CLIMATE-NUCLEAR FUSION waste management,CHALLENGES OF CLIMATE-NUCLEAR FUSION granting construction

  6. Alternative fuel trucks case studies: Running line-haul trucks on ethanol

    SciTech Connect (OSTI)

    Norton, P.; Kelly, K.J.; Marek, N.J.

    1996-10-01T23:59:59.000Z

    This bulletin describes case studies of trucks operating on ethanol fuel. Cost, maintenance and repair, as well as fuel economy are discussed.

  7. Study of casing treatment effects in axial flow compressors

    E-Print Network [OSTI]

    Schiller, Robert Neil

    1973-01-01T23:59:59.000Z

    to in- creased tip leakage between shroud and blade tip. Figure (I) shows a typical performance curve for an axial flow compressor. Note that as pressure ratio increases, the operating 'range between surge and stall is decreased, there by reducing... the surge to stall margin of the axial flow compressor. REFERENCES I 1 ~ 4 Koch, C. C. , "Experimental Evaluation of Outer Case Blowing or Bleeding of Single Stage Axial Flow Compressor". , Part IV. Rep. R 69AEG256, General Electric Co. , (NASA CR...

  8. Case studies of energy information systems and related technology: Operational practices, costs, and benefits

    SciTech Connect (OSTI)

    Motegi, Naoya; Piette, Mary Ann; Kinney, Satkartar; Dewey, Jim

    2003-09-02T23:59:59.000Z

    Energy Information Systems (EIS), which can monitor and analyze building energy consumption and related data throughout the Internet, have been increasing in use over the last decade. Though EIS developers describe the capabilities, costs, and benefits of EIS, many of these descriptions are idealized and often insufficient for potential users to evaluate cost, benefit and operational usefulness. LBNL has conducted a series of case studies of existing EIS and related technology installations. This study explored the following questions: (1) How is the EIS used in day-to-day operation? (2) What are the costs and benefits of an EIS? (3) Where do the energy savings come from? This paper reviews the process of these technologies from installation through energy management practice. The study is based on interviews with operators and energy managers who use EIS. Analysis of energy data trended by EIS and utility bills was also conducted to measure the benefit. This paper explores common uses and findings to identify energy savings attributable to EIS, and discusses non-energy benefits as well. This paper also addresses technologies related to EIS that have been demonstrated and evaluated by LBNL.

  9. Case study of a multiple sand waterflood, Hewitt Unit, OK

    SciTech Connect (OSTI)

    Ruble, D.B.

    1982-03-01T23:59:59.000Z

    Twenty-two sands in the Hewitt field have been flooded simultaneously by Exxon Co. U.S.A.'s Hewitt Unit, and a case history of the operations is detailed. A multiple sand waterflood project requires special optimization methods to improve oil recovery. Injection and production surveillance programs and optimization methods used are highlighted. These include injection wellbore design, injection distribution, production stimulation, polymer augmented injection, and infill drilling. Successful application of these techniques has increased ultimate recovery from this waterflood operation. 3 refs.

  10. Manakin Case Study: visualizing geospatial metadata and complex items

    E-Print Network [OSTI]

    Mikeal, Adam; Green, Cody; Maslov, Alexey; Phillips, Scott; Weimer, Kathy; Leggett, John

    2007-07-16T23:59:59.000Z

    :/handle.tamu.edu/1969.1/2490, and has been featured as an Editor’s Pick on Yahoo.com for its use of the Yahoo! Maps API. This presentation is the third in a set of thre about the Manakin project. This presentation discusses a specific use case of using Manakin...-based interface obvious choice for context Yahoo! Maps chosen for ease of API and aesthethic qualities Geographic coordinates were available for every item Map places every item into a geographic context Allows user to quickly determine coverage area...

  11. Ground control failures. A pictorial view of case studies

    SciTech Connect (OSTI)

    Peng, S.S.

    2007-07-01T23:59:59.000Z

    The book shows, in pictorial views, many forms and/or stages of types of failures in mines, for instance, cutter, roof falls, and cribs. In each case, the year of occurrence is stated in the beginning so that the environment or technological background under which it occurred are reflected. The narrative than begins with the mining and geological conditions, followed by a description of the ground control problems and recommended solutions and results, if any. The sections cover failure of pillars, roof falls, longwall, roof bolting, multiple-seam mining, floor heave, longwall, flooding and weathering of coal, old workings, and shortwall and thin-seam plow longwall.

  12. Case Study: The Imery Group | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO OverviewAttachments EnergyFebruary 29CNGCAMPAIGNING ACTIVITIESTradeCarolineCasaCase

  13. Case Study: Ebus Hybrid Electric Buses and Trolleys

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z C o . C lKieling , ActingOrficePENNELCNGPropaneCase

  14. Federal Energy Savings Performance Contract Case Studies | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721Energy 3_adv_battery.pdf More Fact14,Energy EnergyEnergy Case

  15. SoC Energy Savings = Reduce+Reuse+Recycle: A Case Study Using a 660MHz DC-DC Converter with Integrated Output Filter

    E-Print Network [OSTI]

    Lemieux, Guy

    SoC Energy Savings = Reduce+Reuse+Recycle: A Case Study Using a 660MHz DC-DC Converter, mehdia, samad, prp, shahriar } @ ece.ubc.ca Abstract ­ This paper advocates `reduce, reuse, recycle to emphasize reuse and recycling as well. We design a DC-DC buck converter to demonstrate the 3 techniques

  16. INVESTIGATION OF HYDRAULIC PROBLEMS IN PUMPING STATION; CASE STUDY

    E-Print Network [OSTI]

    M. A. Younes

    Pumping stations play an important role in agriculture development projects. Performance of the pumping stations should satisfy water requirements, and management. There are many problems face these pumping stations affecting their reliability and stability. Hydraulic problems are the most important item in the field of pumping station operation and design. Motivation of this research was presence of wear and pitting impellers and casing of double suction volute casing centrifugal pumps for Ahmed Orabee Pumping Station. Vibration level, hydraulic performance test and visual inspection of impeller wear and pitting show that cavitation problem is the cause of damage. Cavitation normally occurs when liquid at a constant temperature is subjected to vapor pressure either by static or dynamic means. If the local pressure somewhere in the fluid drops to or below vapor pressure and nuclei are present, vapor cavities can be formed. As long as the local pressure stays at vapor pressure and cavity has reached a critical diameter, it will continue to grow rapidly. If the surrounding pressure is above vapor pressure, the bubbles become unstable and collapse. The

  17. COSTS OF WATER TREATMENT DUE TO DIMINISHED WATER QUALITY: A CASE STUDY IN TEXAS

    E-Print Network [OSTI]

    McCarl, Bruce A.

    COSTS OF WATER TREATMENT DUE TO DIMINISHED WATER QUALITY: A CASE STUDY IN TEXAS David Dearmont Resources Research, 34(4), 849-854, 1998. #12;2 CHEMICAL COSTS OF WATER TREATMENT DUE TO DIMINISHED WATER QUALITY: A CASE STUDY IN TEXAS Abstract The cost of municipal water treatment due to diminished water

  18. Energy-GDP decoupling in a second best world -A case study on India Cline Guivarcha,*

    E-Print Network [OSTI]

    Boyer, Edmond

    1 Energy-GDP decoupling in a second best world - A case study on India Céline Guivarcha best world ­ A case study on India. Climatic Change, Volume 113, Number 2, pages 339­ 356. Abstract India, energy intensity, second-best world, power sector, reference scenario. Introduction Reference

  19. Design for Reliability: Case Studies in Manufacturing Process Synthesis Y. Lawrence Yao*, and Chao Liu

    E-Print Network [OSTI]

    Yao, Y. Lawrence

    Design for Reliability: Case Studies in Manufacturing Process Synthesis Y. Lawrence Yao*, and Chao of manufacturing process design is to determine a set of process parameters for a manufacturing task. The design. Such a methodology is illustrated in case studies involving process design of laser forming of sheet metal, in which

  20. Detecting In-Situ Identity Fraud on Social Network Services: A Case Study on Facebook

    E-Print Network [OSTI]

    Chen, Sheng-Wei

    Detecting In-Situ Identity Fraud on Social Network Services: A Case Study on Facebook 1 Shan as the victims. Using Facebook as a case study, we show that it is possible to detect such incidents by analyz significant efforts to prevent identity fraud and protect users' privacy. For example, Facebook records

  1. Statistical Analysis of the Fourth Case Study in Reverse Auction Research

    E-Print Network [OSTI]

    Bhalerao, Aneesh Madhao

    2011-10-21T23:59:59.000Z

    to handle more than a limited number of connections or bidders, a Microsoft SQL database and web system was developed in 2006 and has been used in all subsequent studies. Case studies have involved up to ten participants. The results from the fourth case...

  2. Case Studies Comparing System Advisor Model (SAM) Results to Real Performance Data: Preprint

    SciTech Connect (OSTI)

    Blair, N.; Dobos, A.; Sather, N.

    2012-06-01T23:59:59.000Z

    NREL has completed a series of detailed case studies comparing the simulations of the System Advisor Model (SAM) and measured performance data or published performance expectations. These case studies compare PV measured performance data with simulated performance data using appropriate weather data. The measured data sets were primarily taken from NREL onsite PV systems and weather monitoring stations.

  3. Semi-Immersive Space Mission Design and Visualization: Case Study of the "Terrestrial Planet Finder" Mission.

    E-Print Network [OSTI]

    Semi-Immersive Space Mission Design and Visualization: Case Study of the "Terrestrial Planet Finder of Technology Pasadena, CA 91125 Abstract This paper addresses visualization issues of the Terrestrial Planet the visualization of the Terrestrial Planet Finder Mission (TPF) as a case study to identify and analyze

  4. Multi-fluid Modeling of Transient a Case Study in the Generation and Guiding of Light

    E-Print Network [OSTI]

    Eindhoven, Technische Universiteit

    Multi-fluid Modeling of Transient Plasmas: a Case Study in the Generation and Guiding of Light, B.H.P. Multi-fluid Modeling of Transient Plasmas: a Case Study in the Generation and Guid- ing . . . . . . . . . . . . . . . . . . . . . . . . 37 2.3.1 The multi-fluid description in PLASIMO . . . . . . . . . . . . . . . . 38 iii #12;iv

  5. Production Leveling (Heijunka) Implementation in a Batch Production System: a Case Study

    E-Print Network [OSTI]

    Boyer, Edmond

    Production Leveling (Heijunka) Implementation in a Batch Production System: a Case Study Luciano a case study of an implementation of a new method for Production Leveling designed for batch production. It includes prioritizing criteria of products and level production plan. Moreover, it was applied

  6. Chapter 3: Refrigeration Process Control: Case Study Model 42 33.. RREEFFRRIIGGEERRAATTIIOONN PPRROOCCEESSSS

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Chapter 3: Refrigeration Process Control: Case Study Model 42 33.. RREEFFRRIIGGEERRAATTIIOONN-stage refrigeration system case study. It describes in detail the mathematical model developed, highlighting.1. PROCESS DESCRIPTION The cycle considered here is a two-stage side-load refrigeration unit with propylene

  7. ACSF-Oxfam Rural Resilience Project Case Study: Kejima (Hawassa Zuria), Ethiopia

    E-Print Network [OSTI]

    Angenent, Lars T.

    ACSF-Oxfam Rural Resilience Project Case Study: Kejima (Hawassa Zuria), Ethiopia Brian Thiede Ph Resilience Assessment Case Study: Kejima (Hawassa Zuria), Ethiopia Brian Thiede I. Community Profile The community of Kejima is located in south-central Ethiopia, at an elevation of approximately 1,700 meters

  8. Stream Restoration Databases and Case Studies: A Guide to Information Resources and

    E-Print Network [OSTI]

    Allan, David

    Stream Restoration Databases and Case Studies: A Guide to Information Resources and Their Utility, and case studies of stream and river restoration projects. These resources include a wide range, web-based databases of stream restoration projects. In this process, more data sources were discovered

  9. Stochastic Joint Simulation of Facies and Diagenesis: A Case Study on Early Diagenesis

    E-Print Network [OSTI]

    Boyer, Edmond

    Stochastic Joint Simulation of Facies and Diagenesis: A Case Study on Early Diagenesis of Facies and Diagenesis: A Case Study on Early Diagenesis of the Madison Formation (Wyoming, USA Diagenesis - Fluid-Rocks Interactions Diagenčse minérale - Équilibres fluides-roches D o s s i e r #12;Oil

  10. INFRASTRUCTURE FOR HYDROGEN FUEL CELL VEHICLES: A SOUTHERN CALIFORNIA CASE STUDY

    E-Print Network [OSTI]

    ~--- - ~ .. INFRASTRUCTURE FOR HYDROGEN FUEL CELL VEHICLES: A SOUTHERN CALIFORNIA CASE STUDY Joan FUEL CELL VEHICLES: .A SOUTHERN CALIFORNIA CASE STUDY JoanM. Ogden Center for Energy and Environmental production, fuel cell vehicles are among the leading contenders in emerging markets for zero emission

  11. Introduction and Case Studies The Ratio Plot Under Homogeneity and the Decontaminated Turing

    E-Print Network [OSTI]

    Boehning, Dankmar

    Outline Introduction and Case Studies The Ratio Plot Under Homogeneity and the Decontaminated Introduction and Case Studies The Ratio Plot Under Homogeneity and the Decontaminated Turing The Ratio Plot The Ratio Plot Under Homogeneity and the Decontaminated Turing The Ratio Plot and Structured Heterogeneity

  12. Automatic Web Site Summarization by Image Content: A Case Study with Logo and Trademark

    E-Print Network [OSTI]

    Petrakis, Euripides G.M.

    Automatic Web Site Summarization by Image Content: A Case Study with Logo and Trademark Images. As a case study, this work focuses on logo and trademark images. These are important characteristic signs for distinguishing logo and trademarks from images of other categories (e.g., landscapes, faces). Because the same

  13. LIMB Demonstration Project Extension and Coolside Demonstration

    SciTech Connect (OSTI)

    Goots, T.R.; DePero, M.J.; Nolan, P.S.

    1992-11-10T23:59:59.000Z

    This report presents results from the limestone Injection Multistage Burner (LIMB) Demonstration Project Extension. LIMB is a furnace sorbent injection technology designed for the reduction of sulfur dioxide (SO[sub 2]) and nitrogen oxides (NO[sub x]) emissions from coal-fired utility boilers. The testing was conducted on the 105 Mwe, coal-fired, Unit 4 boiler at Ohio Edison's Edgewater Station in Lorain, Ohio. In addition to the LIMB Extension activities, the overall project included demonstration of the Coolside process for S0[sub 2] removal for which a separate report has been issued. The primary purpose of the DOE LIMB Extension testing, was to demonstrate the generic applicability of LIMB technology. The program sought to characterize the S0[sub 2] emissions that result when various calcium-based sorbents are injected into the furnace, while burning coals having sulfur content ranging from 1.6 to 3.8 weight percent. The four sorbents used included calcitic limestone, dolomitic hydrated lime, calcitic hydrated lime, and calcitic hydrated lime with a small amount of added calcium lignosulfonate. The results include those obtained for the various coal/sorbent combinations and the effects of the LIMB process on boiler and plant operations.

  14. agriculture case study: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    innovation among the urban public: an analysis of the pilot study phase of the San Antonio Evapotranspiration Project--a cooperative effort between the Texas...

  15. Fusion Power Demonstration III

    SciTech Connect (OSTI)

    Lee, J.D. (ed.)

    1985-07-01T23:59:59.000Z

    This is the third in the series of reports covering the Fusion Power Demonstration (FPD) design study. This volume considers the FPD-III configuration that incorporates an octopole end plug. As compared with the quadrupole end-plugged designs of FPD-I and FPD-II, this octopole configuration reduces the number of end cell magnets and shortens the minimum ignition length of the central cell. The end-cell plasma length is also reduced, which in turn reduces the size and cost of the end cell magnets and shielding. As a contiuation in the series of documents covering the FPD, this report does not stand alone as a design description of FPD-III. Design details of FPD-III subsystems that do not differ significantly from those of the FPD-II configuration are not duplicated in this report.

  16. Doing More with Less at Ariens: A Leadership and Transformation Case Study

    E-Print Network [OSTI]

    Hartwell, Jennifer K.

    2007-05-16T23:59:59.000Z

    This case study illustrates the challenges of organizational change and transformation. The company studies, Ariens Company, used "lean" principles and methods in making these changes. As a manufacturer of snow and lawn ...

  17. THE INFLUENCE OF SOCIAL CAPITAL ON THE DEVELOPMENT OF NATURE TOURISM: A CASE STUDY FROM

    E-Print Network [OSTI]

    study from Bahia Magdalena, Mexico Project No. 451 Examining Committee: Chair: Jennifer Silver (Chair to assess the prospects for nature-based tourism. The case study is primarily based on a large-scale

  18. Case Study of Rural High School Math Teachers of African American Students

    E-Print Network [OSTI]

    Jones, Marcus Gee

    2014-05-03T23:59:59.000Z

    The purpose of this qualitative study was to understand the reflective qualities of high school math teachers of African American students in a rural setting. The case study approach was chosen to capture the voices and instructional practices...

  19. A Question Of Peace: A Case Study Of The Peace Museum, UK 

    E-Print Network [OSTI]

    Marcus, Geetha

    2012-01-01T23:59:59.000Z

    In light of the Edinburgh Peace Initiative currently under discussion, this study explains concepts of peace and the context for establishing a new museum by focusing on a preexisting case study. In 1994 the city of ...

  20. Case Studies of High Efficiency Electric Motor Applicability

    E-Print Network [OSTI]

    Wagner, J. R.

    addresses the problems of limited time and missing data, and suggests ways for quickly filling in data gaps. The motors in the studies spanned a range of 7.5 to 250 hp. The prioritization was performed primarily on the basis of simple payback. The study...

  1. Local environmental decision-making with the California environmental quality act: a Santa Barbara case study 

    E-Print Network [OSTI]

    Karstadt, Kent Leonard

    1985-01-01T23:59:59.000Z

    of 143 Environmental Impact Reports (EIRs) from the City and County of Santa Barbara, detailed case studies of five EIR projects, interviews, and a symposium with people involved in the local CEQA process. The major result of the study is a report... Hewlett Foundation. The one-year study began in August, 1984, and involved the collection of data from 143 Environmental Impact Reports (EIRs ), detailed case studies of five EIRs, interviews, and a symposium with people involved in the local CEQA...

  2. Strategy Guideline: Demonstration Home

    SciTech Connect (OSTI)

    Savage, C.; Hunt, A.

    2012-12-01T23:59:59.000Z

    This guideline will provide a general overview of the different kinds of demonstration home projects, a basic understanding of the different roles and responsibilities involved in the successful completion of a demonstration home, and an introduction into some of the lessons learned from actual demonstration home projects. Also, this guideline will specifically look at the communication methods employed during demonstration home projects. And lastly, we will focus on how to best create a communication plan for including an energy efficient message in a demonstration home project and carry that message to successful completion.

  3. The Dynamically Extended Mind -- A Minimal Modeling Case Study

    E-Print Network [OSTI]

    Tom Froese; Carlos Gershenson; David A. Rosenblueth

    2013-05-08T23:59:59.000Z

    The extended mind hypothesis has stimulated much interest in cognitive science. However, its core claim, i.e. that the process of cognition can extend beyond the brain via the body and into the environment, has been heavily criticized. A prominent critique of this claim holds that when some part of the world is coupled to a cognitive system this does not necessarily entail that the part is also constitutive of that cognitive system. This critique is known as the "coupling-constitution fallacy". In this paper we respond to this reductionist challenge by using an evolutionary robotics approach to create a minimal model of two acoustically coupled agents. We demonstrate how the interaction process as a whole has properties that cannot be reduced to the contributions of the isolated agents. We also show that the neural dynamics of the coupled agents has formal properties that are inherently impossible for those neural networks in isolation. By keeping the complexity of the model to an absolute minimum, we are able to illustrate how the coupling-constitution fallacy is in fact based on an inadequate understanding of the constitutive role of nonlinear interactions in dynamical systems theory.

  4. Amazonian Dark Earths: a case study in the Central Amazon

    E-Print Network [OSTI]

    Rebellato, Lilian

    2011-12-31T23:59:59.000Z

    This investigation derives from research conducted over several years and contributes to the understanding of the differential occupational dynamics and use of space in pre-Colonial Amazonia. The goal of this study is to ...

  5. DOE Zero Energy Ready Home Case Study: Preferred Builders, Old...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    study of a DOE Zero Energy Ready Home in Old Greenwich, CT, that scored HERS 42 without PV or HERS 20 with PV. This 2,700-square-foot custom home has advanced framed walls with...

  6. An open source software selection process and a case study

    E-Print Network [OSTI]

    He, Guobin

    2009-06-02T23:59:59.000Z

    In this study, I design an empirical open source software selection process, which reuses some ideas from Commercial Off-the-Shelf selection methods and addresses the characteristics of the open source software. Basically, it consists of three basic...

  7. Modeling of Energy Production Decisions: An Alaska Oil Case Study

    E-Print Network [OSTI]

    Leighty, Wayne

    2008-01-01T23:59:59.000Z

    and demand for US crude oil resources. A dichotomy formedmore of the common oil resource. The study by Kunce (2003)above the same oil resource. If multiple different lease-

  8. Case Studies of Industrial Cogeneration in the U. S. 

    E-Print Network [OSTI]

    Limaye, D. R.; Isser, S.; Hinkle, B.; Hough, T.

    1980-01-01T23:59:59.000Z

    This paper describes the results of a survey and evaluation of plant-specific information on industrial cogeneration. The study was performed as part of a project sponsored by the Electric Power Research Institute to evaluate Dual Energy Use Systems...

  9. Release Pattern Discovery via Partitioning: Methodology and Case Study

    E-Print Network [OSTI]

    Godfrey, Michael W.

    development life cycle (SDLC) models -- relate directly to the idea of software evolution, which is the study of how software changes over time [7]. SDLC models at- tempt to tell us how software should be made

  10. An open source software selection process and a case study 

    E-Print Network [OSTI]

    He, Guobin

    2009-06-02T23:59:59.000Z

    In this study, I design an empirical open source software selection process, which reuses some ideas from Commercial Off-the-Shelf selection methods and addresses the characteristics of the open source software. Basically, ...

  11. Geothermal reservoir assessment case study: Northern Dixie Valley, Nevada

    SciTech Connect (OSTI)

    Denton, J.M.; Bell, E.J.; Jodry, R.L.

    1980-11-01T23:59:59.000Z

    Two 1500 foot temperature gradient holes and two deep exploratory wells were drilled and tested. Hydrologic-hydrochemical, shallow temperature survey, structural-tectonic, petrologic alteration, and solid-sample geochemistry studies were completed. Eighteen miles of high resolution reflection seismic data were gathered over the area. The study indicates that a geothermal regime with temperatures greater than 400/sup 0/F may exist at a depth of approximately 7500' to 10,000' over an area more than ten miles in length.

  12. Keys to success: Ten case studies of effective weatherization programs

    SciTech Connect (OSTI)

    Brown, M.A.; Berry, L.G.; Kolb, J.O.; White, D.L. [Oak Ridge National Lab., TN (United States); Kinney, L.F.; Wilson, T. [Synertech Systems Corp., Syracuse, NY (United States)

    1993-11-01T23:59:59.000Z

    In 1990, DOE initiated a nationwide evaluation of its Weatherization Program, with assistance from Oak Ridge National Laboratory and an advisory group of 40 weatherization professionals, program managers, and researchers. The evaluation is comprised of three impact studies covering the Program`s major market segments: Single-family homes, mobile homes, and dwellings in small (2 to 4-unit) multifamily buildings (the Single-Family Study), Single-family homes heated primarily with fuel oil (the Fuel-Oil Study), and Dwellings in buildings with five or more units (the Multifamily Study). The Single-Family Study, the subject of this report, is a critical part of this coordinated evaluation effort. Its focus on single-family dwellings, mobile homes, and dwellings in small multifamily buildings covers 83% of the income-eligible population and 96% of the dwellings weatherized during Program Year 1989. The first phase of the Single-Family Study involved the analysis of a massive data base of information collected from 368 local weatherization agencies and 543 electric and gas utilities. This analysis resulted in energy-saving and cost-effectiveness estimates for the Weatherization Program and the identification of a set of ten high-performing agencies located throughout the country. The second phase, which is the subject of this report, involves a ``process`` evaluation of these ten high performers, aimed at identifying those weatherization practices that explain their documented success.

  13. Fuel Cell Demonstration Program

    SciTech Connect (OSTI)

    Gerald Brun

    2006-09-15T23:59:59.000Z

    In an effort to promote clean energy projects and aid in the commercialization of new fuel cell technologies the Long Island Power Authority (LIPA) initiated a Fuel Cell Demonstration Program in 1999 with six month deployments of Proton Exchange Membrane (PEM) non-commercial Beta model systems at partnering sites throughout Long Island. These projects facilitated significant developments in the technology, providing operating experience that allowed the manufacturer to produce fuel cells that were half the size of the Beta units and suitable for outdoor installations. In 2001, LIPA embarked on a large-scale effort to identify and develop measures that could improve the reliability and performance of future fuel cell technologies for electric utility applications and the concept to establish a fuel cell farm (Farm) of 75 units was developed. By the end of October of 2001, 75 Lorax 2.0 fuel cells had been installed at the West Babylon substation on Long Island, making it the first fuel cell demonstration of its kind and size anywhere in the world at the time. Designed to help LIPA study the feasibility of using fuel cells to operate in parallel with LIPA's electric grid system, the Farm operated 120 fuel cells over its lifetime of over 3 years including 3 generations of Plug Power fuel cells (Lorax 2.0, Lorax 3.0, Lorax 4.5). Of these 120 fuel cells, 20 Lorax 3.0 units operated under this Award from June 2002 to September 2004. In parallel with the operation of the Farm, LIPA recruited government and commercial/industrial customers to demonstrate fuel cells as on-site distributed generation. From December 2002 to February 2005, 17 fuel cells were tested and monitored at various customer sites throughout Long Island. The 37 fuel cells operated under this Award produced a total of 712,635 kWh. As fuel cell technology became more mature, performance improvements included a 1% increase in system efficiency. Including equipment, design, fuel, maintenance, installation, and decommissioning the total project budget was approximately $3.7 million.

  14. Peaceful Uses Bona Fides: Criteria for Evaluation and Case Studies

    SciTech Connect (OSTI)

    Ajemian, Chris K.; Hazel, Mike; Kessler, Carol E.; Mathews, Carrie E.; Morris, Fred A.; Seward, Amy M.; Peterson, Danielle J.; Smith, Brian W.

    2007-06-06T23:59:59.000Z

    This study applies a set of indicators to assess the peaceful nature of a state’s nuclear program. Evaluation of a country’s nuclear program relative to these indicators can help the international community to take appropriate actions to ensure that the growth of the global nuclear energy industry proceeds peacefully and to minimize nuclear proliferation risks.

  15. LIMB demonstration project extension

    SciTech Connect (OSTI)

    Not Available

    1990-09-21T23:59:59.000Z

    The purpose of the DOE limestone injection multistage burner (LIMB) Demonstration Project Extension is to extend the data base on LIMB technology and to expand DOE's list of Clean Coal Technologies by demonstrating the Coolside process as part of the project. The main objectives of this project are: to demonstrate the general applicability of LIMB technology by testing 3 coals and 4 sorbents (total of 12 coal/sorbent combinations) at the Ohio Edison Edgewater plant; and to demonstrate that Coolside is a viable technology for improving precipitator performance and reducing sulfur dioxide emissions while acceptable operability is maintained. Progress is reported. 3 figs.

  16. A Residential Duct Leakage Case Study on 'Good Cents' Homes

    E-Print Network [OSTI]

    Bryant, J. A.; Perez, R.

    2001-01-01T23:59:59.000Z

    of round or rectangular ducts running through their walls, ceilings, attics, and basements. According to the Electric Power Research Institute (EPRI), even energy experts once believed that air duct leakage was insignificant (EPRI, 1992). In the late 1980s..., researchers began to realize that a significant relationship existed between residential air duct systems and energy loss (EPRI, 1996). Previous studies showed that air duct losses on the order of 35% were typical in residential construction (Jump, et...

  17. Technology commercialization cost model and component case study. Final report

    SciTech Connect (OSTI)

    Not Available

    1991-12-01T23:59:59.000Z

    Fuel cells seem poised to emerge as a clean, efficient, and cost competitive source of fossil fuel based electric power and thermal energy. Sponsors of fuel cell technology development need to determine the validity and the attractiveness of a technology to the market in terms of meeting requirements and providing value which exceeds the total cost of ownership. Sponsors of fuel cell development have addressed this issue by requiring the developers to prepare projections of the future production cost of their fuel cells in commercial quantities. These projected costs, together with performance and life projections, provide a preliminary measure of the total value and cost of the product to the customer. Booz-Allen & Hamilton Inc. and Michael A. Cobb & Company have been retained in several assignments over the years to audit these cost projections. The audits have gone well beyond a simple review of the numbers. They have probed the underlying technical and financial assumptions, the sources of data on material and equipment costs, and explored issues such as the realistic manufacturing yields which can be expected in various processes. Based on the experience gained from these audits, the DOE gave Booz-Allen and Michael A. Cobb & company the task to develop a criteria to be used in the execution of future fuel cell manufacturing cost studies. It was thought that such a criteria would make it easier to execute such studies in the future as well as to cause such studies to be more understandable and comparable.

  18. Technology commercialization cost model and component case study

    SciTech Connect (OSTI)

    Not Available

    1991-12-01T23:59:59.000Z

    Fuel cells seem poised to emerge as a clean, efficient, and cost competitive source of fossil fuel based electric power and thermal energy. Sponsors of fuel cell technology development need to determine the validity and the attractiveness of a technology to the market in terms of meeting requirements and providing value which exceeds the total cost of ownership. Sponsors of fuel cell development have addressed this issue by requiring the developers to prepare projections of the future production cost of their fuel cells in commercial quantities. These projected costs, together with performance and life projections, provide a preliminary measure of the total value and cost of the product to the customer. Booz-Allen Hamilton Inc. and Michael A. Cobb Company have been retained in several assignments over the years to audit these cost projections. The audits have gone well beyond a simple review of the numbers. They have probed the underlying technical and financial assumptions, the sources of data on material and equipment costs, and explored issues such as the realistic manufacturing yields which can be expected in various processes. Based on the experience gained from these audits, the DOE gave Booz-Allen and Michael A. Cobb company the task to develop a criteria to be used in the execution of future fuel cell manufacturing cost studies. It was thought that such a criteria would make it easier to execute such studies in the future as well as to cause such studies to be more understandable and comparable.

  19. Global Simulation of Bioenergy Crop Productivity: Analytical framework and Case Study for Switchgrass

    SciTech Connect (OSTI)

    Nair, S. Surendran [University of Tennessee, Knoxville (UTK)] [University of Tennessee, Knoxville (UTK); Nichols, Jeff A. {Cyber Sciences} [ORNL; Post, Wilfred M [ORNL] [ORNL; Wang, Dali [ORNL] [ORNL; Wullschleger, Stan D [ORNL] [ORNL; Kline, Keith L [ORNL] [ORNL; Wei, Yaxing [ORNL] [ORNL; Singh, Nagendra [ORNL] [ORNL; Kang, Shujiang [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    Contemporary global assessments of the deployment potential and sustainability aspects of biofuel crops lack quantitative details. This paper describes an analytical framework capable of meeting the challenges associated with global scale agro-ecosystem modeling. We designed a modeling platform for bioenergy crops, consisting of five major components: (i) standardized global natural resources and management data sets, (ii) global simulation unit and management scenarios, (iii) model calibration and validation, (iv) high-performance computing (HPC) modeling, and (v) simulation output processing and analysis. A case study with the HPC- Environmental Policy Integrated Climate model (HPC-EPIC) to simulate a perennial bioenergy crop, switchgrass (Panicum virgatum L.) and global biomass feedstock analysis on grassland demonstrates the application of this platform. The results illustrate biomass feedstock variability of switchgrass and provide insights on how the modeling platform can be expanded to better assess sustainable production criteria and other biomass crops. Feedstock potentials on global grasslands and within different countries are also shown. Future efforts involve developing databases of productivity, implementing global simulations for other bioenergy crops (e.g. miscanthus, energycane and agave), and assessing environmental impacts under various management regimes. We anticipated this platform will provide an exemplary tool and assessment data for international communities to conduct global analysis of biofuel biomass feedstocks and sustainability.

  20. United Technologies Corporation: Internal Audit Department (IAD) Case Study: A Case Study of the UTC ACE Operating System

    E-Print Network [OSTI]

    Roth, George

    2008-08-11T23:59:59.000Z

    This study of United Technologies Corporation's Internal Audit Department (IAD) examines how stability and change are important factors in how this department functions and improves. IAD is a leader in the adoption of ...

  1. A Case Study on Management Process of Building Commissioning for a New Building in Hong Kong

    E-Print Network [OSTI]

    Wong, L.

    2006-01-01T23:59:59.000Z

    2006/10/152006/10/1511 A Case Study on Management Process of Building Commissioning for a New Building in Hong Kong Leo CF WONG, Philip KS PIH 2006/10/152006/10/1522 Contents #0;?#0;?#0;?#0;? Cx process Cx process --benefits and objectivesbenefits... and objectives #0;?#0;?#0;?#0;? Cx and its development in the world Cx and its development in the world and Hong Kongand Hong Kong #0;?#0;?#0;?#0;? A case study in HKA case study in HK #0;?#0;?#0;?#0;? ConclusionConclusion 2006/10/152006/10/1533 Buildings...

  2. International ESCO business opportunities and challenges: a Japanese case study

    SciTech Connect (OSTI)

    Vine, E. [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.; Murakoshi, C. [Jyukankyo Research Inst., Tokyo (Japan)

    1997-10-01T23:59:59.000Z

    Recently, US energy service companies (ESCOs) have begun to actively explore markets outside the US. Despite the needs of many countries for ESCO involvement, ESCOs face many challenges (i.e., marketing, financial, institutional, political and cultural barriers). Consequently, most of these firms pursue international project opportunities very selectively due to the costs and risks associated with project development. Despite these barriers, some ESCOs view international work as a strategic expansion of their business, assuming that there will be adequate business in the future to repay them for their initial investment. In this paper, the authors present the findings from a recently completed study on the proposed development of an ESCO industry in Japan. The study was based on four sources of information: (1) a review of the published and unpublished literature on ESCOs; (2) interviews with 26 ESCOs in the US, the US Department of Energy, and the National Association of Energy Service Companies (NAESCO); (3) ESCO presentations at the October 1996 NAESCO meeting; and (4) informal discussions with ESCO experts in the US. They believe that the lessons learned in this study can be transferred or applied to other countries interested in developing an ESCO industry. While energy prices have remained relatively stable over the last several years in Japan and energy capacity is not perceived as a near-term problem, other ``market drivers`` necessary for the emergence of a successful and vibrant ESCO industry exist in Japan. Despite the presence of these market drivers, significant barriers to the successful development of an ESCO industry exist in Japan.

  3. Passive solar house in Skillman, NJ: Case study

    SciTech Connect (OSTI)

    Kendig, J.

    1999-07-01T23:59:59.000Z

    This study traces the history of a single family residence in Skillman, NJ designed by Harrison Fraker. The house, built in 1978, was conceived as primarily passive solar house intended to rely on solar energy for most of its heating needs. Solar features include direct gain windows, water walls and sunspace. The study documents original solar features, identifies changes over time and evaluates performance of the house. The owners have removed movable insulation and significantly reduced the amount of thermal mass over the life of the building. The owner reported comfort level changes intuitively consistent with those modifications. The owner is contemplating further changes to make the house more marketable, changes likely to further alter the remaining passive solar features. Builders Guide software was used to calculate changes in solar performance of the house related to building modifications. Calculations of solar performance generally correspond to anecdotal information from the owner. The author's attempts with Energy 10 program showed some promise, but are as yet inconclusive. At this time BG appears to be more useful and user friendly to the average practitioner with limited time and design resources. As a practicing architect the author is most interested in lessons to be learned from the past as they might contribute to future projects. Information gleaned from this study did confirm intuitively expected and currently disseminated thinking regarding passive solar design. The thermal mass proved to be vulnerable to change. Features which required daily manual adjustment were quickly discarded. Desire for comfort was driving force in changing the house and took precedence over the need to save energy or money.

  4. Modelling Chinese Smart Grid: A Stochastic Model Checking Case Study

    E-Print Network [OSTI]

    Yüksel, Ender; Nielson, Flemming; Zhu, Huibiao; Huang, Heqing

    2012-01-01T23:59:59.000Z

    Cyber-physical systems integrate information and communication technology functions to the physical elements of a system for monitoring and controlling purposes. The conversion of traditional power grid into a smart grid, a fundamental example of a cyber-physical system, raises a number of issues that require novel methods and applications. In this context, an important issue is the verification of certain quantitative properties of the system. In this technical report, we consider a specific Chinese Smart Grid implementation and try to address the verification problem for certain quantitative properties including performance and battery consumption. We employ stochastic model checking approach and present our modelling and analysis study using PRISM model checker.

  5. A TWP-ICE High-Level Cloud Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032) -Less isNFebruaryOctober 2, AlgeriaQ1AResearchStudy of theAAAAA

  6. Case studies in magnetics and ground penetrating radar, Shreveport Convention Center, Shreveport, LA and Yankee Boy Rock Glacier, Ouray, CO

    E-Print Network [OSTI]

    Pierce, Carl J

    2002-01-01T23:59:59.000Z

    The use of geophysical tools such as magnetics and ground penetrating radar are becoming more prevalent in site characterization studies and other geologic research. Two case studies which illustrate this are described here. The first case study...

  7. Economic and Financial Feasibility of Wind Energy -Case Study of Philippines

    E-Print Network [OSTI]

    Economic and Financial Feasibility of Wind Energy - Case Study of Philippines Jyoti Prasad Painuly), can help project make viable in this case. 1 Introduction Wind energy has been one of the most., indicating viability of wind energy for entrepreneurs in developing countries as well. There are varying

  8. From a Dry Bone to a Genetic Portrait: A Case Study of Sickle Cell Anemia

    E-Print Network [OSTI]

    From a Dry Bone to a Genetic Portrait: A Case Study of Sickle Cell Anemia MARINA FAERMAN,1* ALMUT identification; Y chromosome polymorphic markers; sickle cell anemia ABSTRACT The potential and reliability sample, which represented a documented case of sickle cell anemia. -globin gene sequences obtained from

  9. Network learning effects of ISO 22000 standard implementation in a food SME: a case study

    E-Print Network [OSTI]

    Boyer, Edmond

    Network learning effects of ISO 22000 standard implementation in a food SME: a case study Zam to a specific food SME case in order to test it and to identify the key network learning effects that occur will be especially targeted towards the strengthening of learning processes and effects between the SME

  10. Evaluating the FITTEST Automated Testing Tools in SOFTEAM: an Industrial Case Study

    E-Print Network [OSTI]

    Utrecht, Universiteit

    Evaluating the FITTEST Automated Testing Tools in SOFTEAM: an Industrial Case Study Etienne Brosse shown the ability to automate testing within a real industry case. I. INTRODUCTION Software testing.089 3508 TB Utrecht The Netherlands #12;Evaluating the FITTEST Automated Testing Tools in SOFTEAM

  11. 2007 Wholesale Power Rate Case Initial Proposal : Revenue Requirement Study.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2005-11-01T23:59:59.000Z

    The purpose of this Study is to establish the level of revenues from wholesale power rates necessary to recover, in accordance with sound business principles, the Federal Columbia River Power System (FCRPS) costs associated with the production, acquisition, marketing, and conservation of electric power. The generation revenue requirement includes: recovery of the Federal investment in hydro generation, fish and wildlife and conservation costs; Federal agencies' operations and maintenance (O&M) expenses allocated to power; capitalized contract expenses associated with non-Federal power suppliers such as Energy Northwest (EN); other power purchase expenses, such as short-term power purchases; power marketing expenses; cost of transmission services necessary for the sale and delivery of FCRPS power; and all other generation-related costs incurred by the Administrator pursuant to law.

  12. Loop-induced Neutrino Masses: A Case Study

    E-Print Network [OSTI]

    Geng, Chao-Qiang; Tsai, Lu-Hsing

    2014-01-01T23:59:59.000Z

    We study the cocktail model in which the Majorana neutrino masses are generated by the so-called "cocktail" three-loop diagrams with the dark matter particle running in the loops. In particular, we give the correct analytic expressions of the neutrino masses in the model by the detailed calculation of the cocktail diagrams. Based on the reliable numerical calculation of the loop integrals, we explore the parameter space which can give the correct orders of neutrino masses while satisfying other experimental constraints, such as those from the neutrinoless double beta decay, low-energy lepton flavor violation processes, electroweak precision tests, and collider searches. As a result, the large couplings and the large mass difference between the two singly-charged (neutral) scalars are required.

  13. 2007 Wholesale Power Rate Case Initial Proposal : Risk Analysis Study.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration.

    2005-11-01T23:59:59.000Z

    The Federal Columbia River Power System (FCRPS), operated on behalf of the ratepayers of the PNW by BPA and other Federal agencies, faces many uncertainties during the FY 2007-2009 rate period. Among these uncertainties, the largest revolve around hydro conditions, market prices and river operations for fish recovery. In order to provide a high probability of making its U.S. Treasury payments, BPA performs a Risk Analysis as part of its rate-making process. In this Risk Analysis, BPA identifies key risks, models their relationships, and then analyzes their impacts on net revenues (total revenues less expenses). BPA subsequently evaluates in the ToolKit Model the Treasury Payment Probability (TPP) resulting from the rates, risks, and risk mitigation measures described here and in the Wholesale Power Rate Development Study (WPRDS). If the TPP falls short of BPA's standard, additional risk mitigation revenues, such as PNRR and CRAC revenues are incorporated in the modeling in ToolKit until the TPP standard is met. Increased wholesale market price volatility and six years of drought have significantly changed the profile of risk and uncertainty facing BPA and its stakeholders. These present new challenges for BPA in its effort to keep its power rates as low as possible while fully meeting its obligations to the U.S. Treasury. As a result, the risk BPA faces in not receiving the level of secondary revenues that have been credited to power rates before receiving those funds is greater. In addition to market price volatility, BPA also faces uncertainty around the financial impacts of operations for fish programs in FY 2006 and in the FY 2007-2009 rate period. A new Biological Opinion or possible court-ordered change to river operations in FY 2006 through FY 2009 may reduce BPA's net revenues included Initial Proposal. Finally, the FY 2007-2009 risk analysis includes new operational risks as well as a more comprehensive analysis of non-operating risks. Both the operational and non-operational risks will be described in Section 2.0 of this study. Given these risks, if rates are designed using BPA's traditional approach of only adding Planned Net Revenues for Risk (PNRR), power rates would need to recover a much larger ''risk premium'' to meet BPA's TPP standard. As an alternative to high fixed risk premiums, BPA is proposing a risk mitigation package that combines PNRR with a variable rate mechanism similar to the cost recovery adjustment mechanisms used in the FY 2002-2006 rate period. The proposed risk mitigation package is less expensive on a forecasted basis because the rates can be adjusted on an annual basis to respond to uncertain financial outcomes. BPA is also proposing a Dividend Distribution Clause (DDC) to refund reserves in excess of $800M to customers in the event net revenues in the next rate period exceed current financial forecasts.

  14. Hierarchical Models for Batteries: Overview with Some Case Studies

    SciTech Connect (OSTI)

    Pannala, Sreekanth [ORNL; Mukherjee, Partha P [ORNL; Allu, Srikanth [ORNL; Nanda, Jagjit [ORNL; Martha, Surendra K [ORNL; Dudney, Nancy J [ORNL; Turner, John A [ORNL

    2012-01-01T23:59:59.000Z

    Batteries are complex multiscale systems and a hierarchy of models has been employed to study different aspects of batteries at different resolutions. For the electrochemistry and charge transport, the models span from electric circuits, single-particle, pseudo 2D, detailed 3D, and microstructure resolved at the continuum scales and various techniques such as molecular dynamics and density functional theory to resolve the atomistic structure. Similar analogies exist for the thermal, mechanical, and electrical aspects of the batteries. We have been recently working on the development of a unified formulation for the continuum scales across the electrode-electrolyte-electrode system - using a rigorous volume averaging approach typical of multiphase formulation. This formulation accounts for any spatio-temporal variation of the different properties such as electrode/void volume fractions and anisotropic conductivities. In this talk the following will be presented: The background and the hierarchy of models that need to be integrated into a battery modeling framework to carry out predictive simulations, Our recent work on the unified 3D formulation addressing the missing links in the multiscale description of the batteries, Our work on microstructure resolved simulations for diffusion processes, Upscaling of quantities of interest to construct closures for the 3D continuum description, Sample results for a standard Carbon/Spinel cell will be presented and compared to experimental data, Finally, the infrastructure we are building to bring together components with different physics operating at different resolution will be presented. The presentation will also include details about how this generalized approach can be applied to other electrochemical storage systems such as supercapacitors, Li-Air batteries, and Lithium batteries with 3D architectures.

  15. DOE Zero Energy Ready Home Case Study: TC Legend Homes, Bellingham, WA

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready home in Bellingham, WA, that achieves HERS 43 without PV or HERS 13 with 3.2 kW of PV.

  16. Laboratories for the 21st Century: Case Studies, Molecular Foundry, Berkeley, California

    SciTech Connect (OSTI)

    Not Available

    2010-11-01T23:59:59.000Z

    This case study provides information on the Molecular Foundry, which incorporates Labs21 principles in its design and construction. The design includes many of the strategies researched at Lawrence Berkeley Laboratory for energy efficient cleanroom and data centers.

  17. EU, CHINA AND THE ENVIRONMENTAL CHALLENGE IN AFRICA A case study from timber industry in Gabon

    E-Print Network [OSTI]

    1 EU, CHINA AND THE ENVIRONMENTAL CHALLENGE IN AFRICA A case study from timber industry: .....................................................................................................................................................2 Part I: The EU, China and the external environmental dimension....................................................................3 1.1 China as a competitor normative power in the environmental sector

  18. Assessment of Natural Hazard Damage and Reconstruction: A Case Study from Band Aceh, Indonesia

    E-Print Network [OSTI]

    Gillespie, Thomas; Frankenberg, Elizabeth; Braughton, Matt; Cooke, Abigail M.; Armenta, Tiffany; Thomas, Duncan

    2009-01-01T23:59:59.000Z

    mortality in Aceh Province, Indonesia. Bulletin of the Worlda case study of Aceh, Indonesia. Geoscience and Remote1-12. Davies, M. 2006. Indonesia’s war over Aceh: Last stand

  19. I used to be gifted: case studies of lost potential among adolescent females 

    E-Print Network [OSTI]

    McDonnell, Virginia Maurer

    2006-08-16T23:59:59.000Z

    This case study focuses on the influence of certain sociocultural factors on the ability of adolescent girls to fulfill their potentials. Specifically, the purpose of this research is to advance an alternative perspective ...

  20. Case Study - The Challenge: Saving Energy at a Sewage Lift Station...

    Broader source: Energy.gov (indexed) [DOE]

    With a total implementation cost of 16,000, the project yielded a simple payback of 5.4 years. Case Study - The Challenge: Saving Energy at a Sewage Lift Station Through Pump...

  1. Financial reporting at the MIT Formula SAE team : a case study

    E-Print Network [OSTI]

    Sorge, Matthew Hans

    2006-01-01T23:59:59.000Z

    A case study was performed on the financial reporting at the MIT Formula SAE team. For each section of the car it was necessary to provide three main financial documents: Bill of Materials, Process Descriptions, and ...

  2. Curating Brain Images in a Psychiatric Research Group: SCARP Case Study No.1 Summary and Recommendations 

    E-Print Network [OSTI]

    Whyte, Angus

    2008-01-01T23:59:59.000Z

    Curating neuroimaging research data for sharing and re-use involves practical challenges for those concerned in its use and preservation. These are exemplified in a case study of the Neuroimaging Group in the University ...

  3. Environmental Assessment and Metrics for Solar: Case Study of SolFocus Solar Concentrator Systems

    E-Print Network [OSTI]

    Reich-Weiser, Corinne; Dornfeld, David; Horne, Steve

    2008-01-01T23:59:59.000Z

    Environmental Assessment and Metrics for Solar: Case StudyEnvironmental Installation impacts of PV electricity generation - a critical comparison of energy supply options,” in 21st European Photovoltaic Solar

  4. Communication Strategy Use: An Exploratory Case Study of an EFL Lesson in Second Life 

    E-Print Network [OSTI]

    Gowans, Susan

    This paper reports the findings of an exploratory case study examining communication strategy use between three adult EFL learners and their teacher from diverse cultural backgrounds, whilst incorporating voice and text chat during meaning focused...

  5. Solar heating and cooling of housing : five institutional analysis case studies

    E-Print Network [OSTI]

    Nutt-Powell, Thomas E.

    1979-01-01T23:59:59.000Z

    This paper is one of a series resulting from institutional analysis of photovoltaic (PV) acceptance. The case studies reported here involve use of solar thermal technologies in variuos residential settings. All of the ...

  6. Case studies in the digital fabrication of open-source consumer electronic products

    E-Print Network [OSTI]

    Mellis, David Adley

    2011-01-01T23:59:59.000Z

    This thesis explores the effects of digital fabrication on the design, production, and customization of consumer electronic devices. It does so through a series of three case studies - a radio, a pair of speakers, and a ...

  7. Commissioning of A Large Office Building in Texas - A Case Study

    E-Print Network [OSTI]

    Deng, S.; Turner, W. D.; Liu, M.

    2000-01-01T23:59:59.000Z

    This case study involves commissioning of a large office building in the hot and humid climate of south Texas. The commissioning involved the installation of a VFD (Variable Frequency Drive) on a chilled water pump, improved EMCS (Energy Management...

  8. Case Study: Passive Solar Concepts Adapted to In-Fill Housing in a Hot, Humid Climate 

    E-Print Network [OSTI]

    McQueen, T. M.; White, J. T.

    1985-01-01T23:59:59.000Z

    in architectural proposals for contemporary housing design in these areas. Thin investigation considers the development of a case study that involves the planning and design of a compact, solar multi-family residential unit for a central city site condition...

  9. Solar radiation management impacts on agriculture in China: A case study in the Geoengineering

    E-Print Network [OSTI]

    Robock, Alan

    Solar radiation management impacts on agriculture in China: A case study in the Geoengineering-Earth Science and Technology, Yokohama, Japan Abstract Geoengineering via solar radiation management could affect agricultural productivity due to changes in temperature, precipitation, and solar radiation

  10. Citizen Science Case Study: What's Invasive / Project Budburst Nathan R. Prestopnik

    E-Print Network [OSTI]

    Crowston, Kevin

    Citizen Science Case Study: What's Invasive / Project Budburst Nathan R. Prestopnik Syracuse University napresto@syr.edu Abstract What's Invasive and Project Budburst are citizen science projects mobile-based citizen science deployment, as well as issues surrounding system development

  11. Case Study: Fuel Cells Provide Combined Heat and Power at Verizon's Garden City Central Office

    Fuel Cell Technologies Publication and Product Library (EERE)

    This case study describes how Verizon's Central Office in Garden City, NY, installed a 1.4-MW phosphoric acid fuel cell system as an alternative solution to bolster electric reliability, optimize the

  12. Country hedging for real income stabilization: a case study of South Korea and Egypt

    E-Print Network [OSTI]

    Gordon, Kathryn M.; Rausser, Gordon C.

    1984-01-01T23:59:59.000Z

    It Manageable in the Case of Egypt?" Journal of Modeling, 2:S1UDY OF SOUIH KOREA AND EGYPT by Kathryn M. llirdon andSTUDY OF SOUTII KOREA AND EGYPT* By Kathryn M. Gordon and

  13. The processes of industrial gold mining and inequality: a Ghanaian case study 

    E-Print Network [OSTI]

    Gawor, Natalie

    2011-11-24T23:59:59.000Z

    The research examined how inequality manifests itself through the processes of industrial gold mining using a case study of Newmont Mining Corporations’ Ahafo Gold Mine in Ghana. The pursuit of neoliberal development and ...

  14. CSP 581: Applied AI Programming Peter Norvig, Paradigms of AI Programming: Case Studies in Common Lisp

    E-Print Network [OSTI]

    Heller, Barbara

    CSP 581: Applied AI Programming Texts Peter Norvig, Paradigms of AI Programming: Case Studies LISP Programs 4 hours Total 42 hours CSP 581: Applied AI Programming - CS Dept, Illinois Insti... 1

  15. NASA/FPL Renewable Project Case Study: Space Coast Next Generation Solar Energy Center

    Broader source: Energy.gov [DOE]

    Presentation covers the NASA/FPL Renewable Project Case Study: Space Coast Next Generation Solar Energy Center given at the Spring 2009 Federal Utility Partnership Working Group (FUPWG) meeting in...

  16. Assessing methods for predicting retrofit energy savings in buildings : case study of a Norwegian school

    E-Print Network [OSTI]

    Ricker, Elizabeth, S.M. (Elizabeth Ann). Massachusetts Institute of Technology

    2008-01-01T23:59:59.000Z

    This work investigates methods for predicting retrofit energy savings in existing Norwegian buildings. A case study is performed on a 30 year old primary school in Trondheim, Norway. The energy consumption in the school ...

  17. Case Study: Passive Solar Concepts Adapted to In-Fill Housing in a Hot, Humid Climate

    E-Print Network [OSTI]

    McQueen, T. M.; White, J. T.

    1985-01-01T23:59:59.000Z

    in architectural proposals for contemporary housing design in these areas. Thin investigation considers the development of a case study that involves the planning and design of a compact, solar multi-family residential unit for a central city site condition...

  18. Characterizing pervasive vehicular access to the cellular RAN infrastructure: an urban case study

    E-Print Network [OSTI]

    Fiore, Marco

    features of pervasive vehicular access in a case- study large-scale urban environment, in presence] and distant support for safety, diagnostic and anti-theft services (e.g., BMW Assist, Ford SYNC, General Motor

  19. Risk-Informed Safety Margin Characterization Case Study: Selection of Electrical Equipment to Be Subjected to Environmental Qualification

    SciTech Connect (OSTI)

    D. P. Blanchard; R. W. Youngblood

    2014-06-01T23:59:59.000Z

    The Risk-Informed Safety Margin Characterization (RISMC) pathway of the DOE’s Light Water Reactor Sustainability (LWRS) program focuses on advancing the state of the art in safety analysis and risk assessment to support decision-making on nuclear power plant operation well beyond the originally designed lifetime of the plants (i.e., beyond 60 years). Among the issues being addressed in RISMC is the significance of SSC aging and how confident we are about our understanding of its impact on the margin between the loads SSCs are expected to see during normal operation and accident conditions, and the SSC capacities (their ability to resist those loads) as the SSCs age. In this paper, a summary is provided of a case study that examines SSC aging from an environmental qualification (EQ) perspective. The case study illustrates how the state of knowledge regarding SSC margin can be characterized given the overall integrated plant design, and was developed to demonstrate a method for deciding on which cables to focus, which cables are not so important from an environmental qualification margin standpoint, and what plant design features or operating characteristics determine the role that environmental qualification plays in establishing a safety case on which decisions regarding margin can be made. The selection of cables for which demonstration of margin with respect to aging and environmental challenges uses a technique known as Prevention Analysis. Prevention Analysis is a Boolean method for optimal selection of SSCs (that is, those combinations of SSCs both necessary and sufficient to meet a predetermined selection criterion) in a manner that allows demonstration that plant-level safety can be demonstrated by the collection of selected SSCs alone. Choosing the set of SSCs that is necessary and sufficient to satisfy the safety objectives, and demonstrating that the safety objectives can be met effectively, determines where resources are best allocated to assure SSC performance margin. The paper describes the resulting component types that were selected by Prevention Analysis and identifies the accident sequence characteristics that cause these component types to be important from an EQ and aging perspective (and, hence, worthwhile evaluating the extent of safety margin). In addition, component types not selected as needing significant margin from an EQ and aging perspective are discussed and an engineering rationale is developed justifying the lack of need to apply resources to demonstrating margin for these component types. This rationale is in terms of design features of the plant and operating characteristics that make these component types less important from an EQ and aging perspective. While the case study focuses on EQ and aging of equipment and cables located inside the containment of this PWR, the prevention analysis method is demonstrated to be an effective technique for identification of minimal collections of components that would be effective in managing safety for a variety of issues associated with aging and long-term operation of the fleet of plants.

  20. Urban tree maintenance scheduling: a case study using Fort Worth's METRIS geo data base

    E-Print Network [OSTI]

    Mirenda, Joseph Salvatore

    1981-01-01T23:59:59.000Z

    URBAN TREE MAINTENANCE SCHEDULING: A CASE STUDY USING FORT WORTH'S METRIS GEO DATA BASE A Thesis JOSEPH SALVATORE MIRENDA Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree... of MASTER OF SCIENCE December, 1981 Major Subject: Forestry URBAN TREE MAINTENANCE SCHEDULING: A CASE STUDY USING FORT WORTH'S METRIS GEO DATA BASE A Thesis by JOSEPH SALVATORE MIRENDA Approved as to style and content by: Dr. Robert D. Baker...

  1. Nature in Play: Measuring the Relationship of Nature and Unstructured Play through Case Studies 

    E-Print Network [OSTI]

    McCleary, Lisa Christine

    2009-06-09T23:59:59.000Z

    fulfillment of the requirements for the designation as UNDERGRADUATE RESEARCH SCHOLAR April 2009 Major: Landscape Architecture ii NATURE IN PLAY: MEASURING THE RELATIONSHIP OF NATURE AND UNSTRUCTURED PLAY THROUGH CASE STUDIES A... Advisor: Jody Rosenblatt Naderi Associate Dean for Undergraduate Research: Robert C. Webb April 2009 Major: Landscape Architecture iii ABSTRACT Nature in Play: Measuring the Relationship of Nature and Unstructured Play through Case Studies...

  2. Commercial feasibility and impact of embryo transfer technology on the diary industry: case study

    E-Print Network [OSTI]

    Martin, Daniel Lee

    1985-01-01T23:59:59.000Z

    Industry: A Case Study (August 1985) Daniel Lee Martin, B. S. , Texas A&M University Chairman of Advisory Committee: Dr. Ronald D. Knutson )( commercial dairy producer using embryo transfer (ET) proce- dures in its herd was used as a case study... to analyze the commer- cial feasibility and impacts of ET technology. The dairy used the procedures to accelerate the rate at which replacements were raised from the better cows in the herd. Embryo transfer costs at the dairy are about one...

  3. Evaluating forest fire prevention programs: an analysis of three case studies

    E-Print Network [OSTI]

    Rigsby, Shelley Renee

    1980-01-01T23:59:59.000Z

    EVALUATING FOREST FIRE PREVENTION PROGRAMS; AN ANALYSIS OF THREE CASE STUDIES A Thesi. s by Shelley Renee Rigsby Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER... OF SCIENCE December 1980 jor Subject: Sociology EVALUATING FOREST FIRE PREVENTION PROGRAMS: AN ANALYSIS OF THREE CASE STUDIES A Thesis by S. Ranee Rigsby Approved as to style and content by: (Chairman of Committee) p~ (Memb r) (Head f partment...

  4. Core Drilling Demonstration

    Broader source: Energy.gov [DOE]

    Tank Farms workers demonstrate core drilling capabilities for Hanford single-shell tanks. Core drilling is used to determine the current condition of each tank to assist in the overall assessment...

  5. HVAC ENERGY EFFICIENCY CASE STUDY "Melink works well in our kitchen--it saves energy, reduces hood noise

    E-Print Network [OSTI]

    California at Davis, University of

    HVAC ENERGY EFFICIENCY CASE STUDY "Melink works well in our kitchen--it saves energy, reduces hood case studies have already been performed using this technology (demand control kitchen ventilation) and the savings are well proven. This study is a summarized compilation of select SPEED case studies

  6. Reverse Auction Bidding: An Analysis of Case Study for Bid Timing

    E-Print Network [OSTI]

    Kumar, Apoorv

    2014-08-12T23:59:59.000Z

    . The bid timing data from previous studies shows that the bid arrival times follows a Poisson process. This study aims to confirm the previous investigation that the bid timing data from the Reverse Auction Bidding case studies at TAMU fits the non...

  7. Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z C o . C lKieling , ActingOrficePENNEL

  8. Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About Batteriesmetal-organic frameworks |A photo ofMay 2015

  9. An approach for integrating toxicogenomic data in risk assessment: The dibutyl phthalate case study

    SciTech Connect (OSTI)

    Euling, Susan Y., E-mail: euling.susan@epa.gov [National Center for Environmental Assessment, Office of Research and Development, U.S. Environmental Protection Agency, Washington, DC (United States); Thompson, Chad M. [ToxStrategies, Inc., 23501 Cinco Ranch Blvd., Suite G265, Katy, TX 77494 (United States); Chiu, Weihsueh A. [National Center for Environmental Assessment, Office of Research and Development, U.S. Environmental Protection Agency, Washington, DC (United States); Benson, Robert [U.S. Environmental Protection Agency, Region 8, Mail code 8P-W, 1595 Wynkoop Street, Denver, CO 80202 (United States)

    2013-09-15T23:59:59.000Z

    An approach for evaluating and integrating genomic data in chemical risk assessment was developed based on the lessons learned from performing a case study for the chemical dibutyl phthalate. A case study prototype approach was first developed in accordance with EPA guidance and recommendations of the scientific community. Dibutyl phthalate (DBP) was selected for the case study exercise. The scoping phase of the dibutyl phthalate case study was conducted by considering the available DBP genomic data, taken together with the entire data set, for whether they could inform various risk assessment aspects, such as toxicodynamics, toxicokinetics, and dose–response. A description of weighing the available dibutyl phthalate data set for utility in risk assessment provides an example for considering genomic data for future chemical assessments. As a result of conducting the scoping process, two questions—Do the DBP toxicogenomic data inform 1) the mechanisms or modes of action?, and 2) the interspecies differences in toxicodynamics?—were selected to focus the case study exercise. Principles of the general approach include considering the genomics data in conjunction with all other data to determine their ability to inform the various qualitative and/or quantitative aspects of risk assessment, and evaluating the relationship between the available genomic and toxicity outcome data with respect to study comparability and phenotypic anchoring. Based on experience from the DBP case study, recommendations and a general approach for integrating genomic data in chemical assessment were developed to advance the broader effort to utilize 21st century data in risk assessment. - Highlights: • Performed DBP case study for integrating genomic data in risk assessment • Present approach for considering genomic data in chemical risk assessment • Present recommendations for use of genomic data in chemical risk assessment.

  10. Integration Of Reflectance To Study Glacier Surface Using Landsat 7 ETM+: A Case Study Of The Petermann Glacier In Greenland

    E-Print Network [OSTI]

    Gilbes, Fernando

    Integration Of Reflectance To Study Glacier Surface Using Landsat 7 ETM+: A Case Study Of The Petermann Glacier In Greenland Félix O. Rivera Santiago Department Of Geology, University Of Puerto Rico, Mayaguez Campus, P.O. Box 9017 Mayaguez Puerto Rico,00681 Abstract- Glaciers are masses of ice and granular snow

  11. IMPLEMENTING AN ISO 14001 ENVIRONMENTAL MANAGEMENT SYSTEM A Case Study of Environmental Training and Awareness at the Vancouver

    E-Print Network [OSTI]

    IMPLEMENTING AN ISO 14001 ENVIRONMENTAL MANAGEMENT SYSTEM A Case Study of Environmental Training an ISO 14001 environmental management system: A case study of environmental training and awareness of limiting environmental damage. Environmental management systems (EMSs), such as ISO 14001, provide

  12. Prioritization and Implementation Plan for Collaborative Case Study on RPV Steels During Extended Service

    SciTech Connect (OSTI)

    Busby, Jeremy T [ORNL; Nanstad, Randy K [ORNL

    2010-02-01T23:59:59.000Z

    Nuclear power currently provides a significant fraction of the United States non-carbon emitting power generation. In future years, nuclear power must continue to generate a significant portion of the nation's electricity to meet the growing electricity demand, clean energy goals, and ensure energy independence. New reactors will be an essential part of the expansion of nuclear power. However, given limits on new builds imposed by economics and industrial capacity, the extended service of the existing fleet will also be required. Ensuring public safety and environmental protection is a prerequisite to all nuclear power plant operating and licensing decisions at all stages of reactor life. This includes the original license period of 40 years, the first license extension to 60 years, and certainly for any consideration of life beyond 60 years. For extended operating periods, it must be shown that adequate aging management programs are present or planned and that appropriate safety margins exist throughout the subsequent license renewal periods. Materials degradation can impact reactor reliability, availability, and potentially, safe operation. Components within a reactor must tolerate the harsh environment of high temperature water, stress, vibration, and/or an intense neutron field. Degradation of materials in this environment can lead to reduced performance, and in some cases, sudden failure. Clearly, understanding materials degradation and accounting for the effects of a reactor environment in operating and regulatory limits is essential. The Light Water Reactor Sustainability (LWRS) Program is designed to support the long-term operation (LTO) of existing domestic nuclear power generation with targeted collaborative research programs into areas beyond current short-term optimization opportunities. Within the LWRS program, two pathways have been initiated to perform research essential to informing relicensing decisions. The Materials Aging and Degradation Pathway is designed to help develop the scientific basis for understanding and predicting long-term environmental degradation behavior of materials in nuclear power plants and to provide data and methods to assess performance of systems, structures, and components essential to safe and sustained operation. The Risk-Informed Safety Margins Characterization Pathway (RISMC) seeks to merge fundamental scientific understanding of critical phenomenological conditions and deterministic predictions of nuclear power plant performance with risk-informed characterization tools. This will provide an integrated characterization of public safety margins in an optimization of nuclear safety, plant performance, and long-term asset management. Clearly, these two pathways have many synergies in goals and outcomes. The data and mechanisms generated in the Materials Pathway may feed into and mold efforts within the RISMC Pathway. In addition, insights from the characterization tools developed in RISMC tasks may inform materials testing needs and experiments. To demonstrate this potentially powerful interaction, a joint case study has been proposed and initiated. This document describes the initial planning for a coordinated study between the Materials and the RISMC Pathways. A brief description of each Pathway is presented along with a more detailed description of the needs and requirements of this collaborative task. A list of criteria for any case-study candidate are then listed, along with the rationale for choosing pressurized thermal shock as the prime candidate an inter-pathway collaboration. A proposed timeline and organization of future interactions on this subject area is also presented.

  13. Better Buildings Alliance, adidas Case Study: adidas Saves Energy and Costs with Planned RTU Replacement Program (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01T23:59:59.000Z

    Case study describing how adidas implemented a best practice of a planned replacement program for its RTUs.

  14. Defining and Modeling Known Adverse Outcome Pathways: Domoic Acid and Neuronal Signaling as a Case Study

    SciTech Connect (OSTI)

    Watanabe, Karen H.; Andersen, Melvin E.; Basu, Nil; Carvan, Michael J.; Crofton, Kevin M.; King, Kerensa A.; Sunol, Cristina; Tiffany-Castiglioni, Evelyn; Schultz, Irvin R.

    2011-01-01T23:59:59.000Z

    An adverse outcome pathway (AOP) is a sequence of key events from a molecular-level initiating event and an ensuing cascade of steps to an adverse outcome with population level significance. To implement a predictive strategy for ecotoxicology, the multiscale nature of an AOP requires computational models to link salient processes (e.g., in chemical uptake, toxicokinetics, toxicodynamics, and population dynamics). A case study with domoic acid was used to demonstrate strategies and enable generic recommendations for developing computational models in an effort to move toward a toxicity testing paradigm focused on toxicity pathway perturbations applicable to ecological risk assessment. Domoic acid, an algal toxin with adverse effects on both wildlife and humans, is a potent agonist for kainate receptors (ionotropic glutamate receptors whose activation leads to the influx of Na+ and Ca2+). Increased Ca2+ concentrations result in neuronal excitotoxicity and cell death primarily in the hippocampus, which produces seizures, impairs learning and memory, and alters behavior in some species. Altered neuronal Ca2+ is a key process in domoic acid toxicity which can be evaluated in vitro. Further, results of these assays would be amenable to mechanistic modeling for identifying domoic acid concentrations and Ca2+ perturbations that are normal, adaptive, or clearly toxic. In vitro assays with outputs amenable to measurement in exposed populations can link in vitro to in vivo conditions, and toxicokinetic information will aid in linking in vitro results to the individual organism. Development of an AOP required an iterative process with three important outcomes: (1) a critically reviewed, stressor-specific AOP; (2) identification of key processes suitable for evaluation with in vitro assays; and (3) strategies for model development.

  15. Residential energy-tax-credit eligibility: a case study for the heat-pump water heater

    SciTech Connect (OSTI)

    Cohn, S M; Cardell, N S

    1982-09-01T23:59:59.000Z

    Described are the methodology and results of an analysis to determine the eligibility of an energy-efficient item for the residential energy-tax credit. Although energy credits are granted only on a national basis, an attempt to determine the tax-credit eligibility for an item such as the heat-pump water heater (HPWH) analyzing national data is inappropriate. The tax-credit eligibility of the HPWH is evaluated for the ten federal regions to take into consideration the regional differences of: (1) HPWH annual efficiency, (2) existing water heater stocks by fuel type, (3) electricity, fuel oil, and natural-gas price variations, and (4) electric-utility oil and gas use for electricity generation. A computer model of consumer choice of HPWH selection as well as a computer code evaluating the economics of tax-credit eligibility on a regional basis were developed as analytical tools for this study. The analysis in this report demonstrates that the HPWH meets an important criteria for eligibility by the Treasury Department for an energy tax credit (nationally, the estimated dollar value of savings of oil and gas over the lifetime of those HPWH's sold during 1981 to 1985 due to the tax credit exceeds the revenue loss to the treasury). A natural-gas price-deregulation scenario is one of two fuel scenarios that are evaluated using the equipment choice and tax-credit models. These two cases show the amounts of oil and gas saved by additional HPWH units sold (due to the tax credit during 1981 to 1985 (range from 13.9 to 23.1 million barrels of oil equivalent over the lifetime of the equipment.

  16. A case study of the experiences of five former and current urban non-traditional superintendents

    E-Print Network [OSTI]

    Sanchez, Maria Severita

    2009-05-15T23:59:59.000Z

    State of the American School Superintendency: A Mid-Decade Study, conducted by Thomas E. Glass and Louis A. Franceschini, uses data from 1,338 superintendents surveyed in 2006 (Pascopella, 2008). Usually these studies are conducted every 10 years... A CASE STUDY OF THE EXPERIENCES OF FIVE FORMER AND CURRENT URBAN NON-TRADITIONAL SUPERINTENDENTS A Dissertation by MARIA SEVERITA SANCHEZ Submitted to the Office of Graduate Studies of Texas A&M University...

  17. A case study of the low-level jet during an episode of spring convection

    E-Print Network [OSTI]

    Donahoe, Christopher Scott

    1996-01-01T23:59:59.000Z

    A CASE STUDY OF THE LOW-LEVEL JET DURING AN EPISODE OF SPRING CONVECTION A Thesis CHRISTOPHER SCOTT DONAHOE Submitted to the Office of Graduate Studies of Texas AdrM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE August 1996 Major Subject: Meteorology A CASE STUDY OF THE LOW-LEVEL JET DURING AN EPISODE OF SPRING CONVECTION A Thesis by CHRISTOPHER SCOTT DONAHOE Submitted to Texas A&M University in partial ful6llment of the requirements...

  18. Optimization of Industrial Refrigeration Plants: Including a Case Study at Stonyfield Farm Yogurt

    E-Print Network [OSTI]

    Dixon, R.; McCowan, B.; Drake, L.; Epstein, G.; D'Antonio, M.; Moray, S.

    2006-01-01T23:59:59.000Z

    controls and unloading (specifically in the case of screw compressors which do not unload linearly). A lower refrigerant temperature results in lower suction pressure and increased compressor power requirements. A lower condensing pressure, which is a...Optimization of Industrial Refrigeration Plants: Including a Case Study at Stonyfield Farm Yogurt Mark D’Antonio Satyen Moray Brian McCowan Gary Epstein VP Engineering Services Project Manager VP Technology & Development President Energy...

  19. MAJORANA Demonstrator Motivation

    E-Print Network [OSTI]

    Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

    1 #12;OVERVIEW MAJORANA Demonstrator Motivation Neutrinoless double beta decay Search for axions: MAJORANA Collaboration #12;NEUTRINOLESS DOUBLE BETA DECAY Emission of 2 electrons from Ge-76 and application to neutrinoless double beta decay search in Ge- 76." Journal of Instrumentation 6 (2011).13 #12

  20. GATEWAY Demonstration Special Reports

    Broader source: Energy.gov [DOE]

    DOE shares the results of completed GATEWAY demonstration projects, publishing detailed reports that include analysis of data collected, projected energy savings, economic analyses, and user feedback. Report briefs summarize key findings in a quick-scan format. Both the reports and briefs are available as Adobe Acrobat PDFs.

  1. Group Dynamics in a Security Risk Management Team Context: A Teaching Case Study

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Group Dynamics in a Security Risk Management Team Context: A Teaching Case Study Rostyslav-up of security risk management teams and their performance. Three different models were used to construct team security risk management tasks. The study has shown that there is a possible correlation between the teams

  2. Mechanical reliability of silica optical fiber: a case study for a biomedical application

    E-Print Network [OSTI]

    Matthewson, M. John

    Mechanical reliability of silica optical fiber: a case study for a biomedical application Yunn, Piscataway, NJ 08854-8065 ABSTRACT The mechanical reliability of optical fiber used in certain biomedical the fiber can be safely used. In this paper we study two commercially available optical fibers designed

  3. Wildlife conservation and reduced emissions from deforestation in a case study of Nantu National Park,

    E-Print Network [OSTI]

    Malhi, Yadvinder

    Wildlife conservation and reduced emissions from deforestation in a case study of Nantu National Measures of success a b s t r a c t Discussions on how to reduce carbon emissions from deforestation of the role of protected area (PA) status in reducing tropical deforestation. This study employs a range

  4. Heart Rate Regulation processed through wavelet analysis and change detection. Some case studies

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Heart Rate Regulation processed through wavelet analysis and change detection. Some case studies-mail: veronique.billat@wanadoo.fr December 29, 2010 Abstract Heart rate variability (HRV) is an indicator of the regulation of the heart engine, Task Force (1996). This study compares the regulation of the heart in two

  5. Public Housing after Hurricane, Urban Renewal or Removal? The Case Studies of Beaumont and Galveston, Texas.

    E-Print Network [OSTI]

    Tran, Tho Ngo Duc

    2013-05-01T23:59:59.000Z

    , such as floodplains or other low-lying areas. When disasters such as hurricanes strike, housing located in these areas is likely to receive the greatest damage and recovery may be slower. This study looks at the case study of public housing in Galveston and Beaumont...

  6. A Refined Ethical Impact Assessment Tool and a Case Study of its Application

    E-Print Network [OSTI]

    California at San Diego, University of

    A Refined Ethical Impact Assessment Tool and a Case Study of its Application Michael Bailey1 , Erin? What impact does the immediacy of an event (e.g., DDoS) have on our response to the event? [4 understanding, and (iii) retrospectively apply this EIA to an ethically challenging, original study in ICTR. 1

  7. A CASE STUDY ON CULTURE AND THE IMPLEMENTATION OF MANUFACTURING STRATEGY IN MEXICO

    E-Print Network [OSTI]

    Leon, Jorge

    A CASE STUDY ON CULTURE AND THE IMPLEMENTATION OF MANUFACTURING STRATEGY IN MEXICO Carlos Acosta1 Américas, Puebla, Mexico (2) Texas A&M University, College Station, USA (*) Corresponding author Abstract Study on Culture and the Implementation of Manufacturing Strategy in Mexico,"Journal of Manufacturing

  8. Benefits from flywheel energy storage for area regulation in California - demonstration results : a study for the DOE Energy Storage Systems program.

    SciTech Connect (OSTI)

    Eyer, James M. (Distributed Utility Associates, Livermore, CA)

    2009-10-01T23:59:59.000Z

    This report documents a high-level analysis of the benefit and cost for flywheel energy storage used to provide area regulation for the electricity supply and transmission system in California. Area regulation is an 'ancillary service' needed for a reliable and stable regional electricity grid. The analysis was based on results from a demonstration, in California, of flywheel energy storage developed by Beacon Power Corporation (the system's manufacturer). Demonstrated was flywheel storage systems ability to provide 'rapid-response' regulation. Flywheel storage output can be varied much more rapidly than the output from conventional regulation sources, making flywheels more attractive than conventional regulation resources. The performance of the flywheel storage system demonstrated was generally consistent with requirements for a possible new class of regulation resources - 'rapid-response' energy-storage-based regulation - in California. In short, it was demonstrated that Beacon Power Corporation's flywheel system follows a rapidly changing control signal (the ACE, which changes every four seconds). Based on the results and on expected plant cost and performance, the Beacon Power flywheel storage system has a good chance of being a financially viable regulation resource. Results indicate a benefit/cost ratio of 1.5 to 1.8 using what may be somewhat conservative assumptions. A benefit/cost ratio of one indicates that, based on the financial assumptions used, the investment's financial returns just meet the investors target.

  9. AVNG system demonstration

    SciTech Connect (OSTI)

    Thron, Jonathan Louis [Los Alamos National Laboratory; Mac Arthur, Duncan W [Los Alamos National Laboratory; Kondratov, Sergey [VNIIEF; Livke, Alexander [VNIIEF; Razinkov, Sergey [VNIIEF

    2010-01-01T23:59:59.000Z

    An attribute measurement system (AMS) measures a number of unclassified attributes of potentially classified material. By only displaying these unclassified results as red or green lights, the AMS protects potentially classified information while still generating confidence in the measurement result. The AVNG implementation that we describe is an AMS built by RFNC - VNIIEF in Sarov, Russia. To provide additional confidence, the AVNG was designed with two modes of operation. In the secure mode, potentially classified measurements can be made with only the simple red light/green light display. In the open mode, known unclassified material can be measured with complete display of the information collected from the radiation detectors. The AVNG demonstration, which occurred in Sarov, Russia in June 2009 for a joint US/Russian audience, included exercising both modes of AVNG operation using a number of multi-kg plutonium sources. In addition to describing the demonstration, we will show photographs and/or video taken of AVNG operation.

  10. LIMB Demonstration Project Extension

    SciTech Connect (OSTI)

    Not Available

    1988-09-15T23:59:59.000Z

    The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full-scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO and NO emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

  11. LIMB Demonstration Project Extension

    SciTech Connect (OSTI)

    Not Available

    1989-06-15T23:59:59.000Z

    The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

  12. LIMB Demonstration Project Extension

    SciTech Connect (OSTI)

    Not Available

    1989-11-15T23:59:59.000Z

    The basic goal of the Limestone Injection Mitigation Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

  13. LIMB Demonstration Project Extension

    SciTech Connect (OSTI)

    Not Available

    1988-12-15T23:59:59.000Z

    The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

  14. LIMB Demonstration Project Extension

    SciTech Connect (OSTI)

    Not Available

    1988-03-15T23:59:59.000Z

    The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full-scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

  15. LIMB Demonstration Project Extension

    SciTech Connect (OSTI)

    Not Available

    1989-03-15T23:59:59.000Z

    The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (a) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems, (b) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit, and (c) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater.

  16. Nucla CFB Demonstration Project

    SciTech Connect (OSTI)

    Not Available

    1990-12-01T23:59:59.000Z

    This report documents Colorado-Ute Electric Association's Nucla Circulating Atmospheric Fluidized-Bed Combustion (AFBC) demonstration project. It describes the plant equipment and system design for the first US utility-size circulating AFBC boiler and its support systems. Included are equipment and system descriptions, design/background information and appendices with an equipment list and selected information plus process flow and instrumentation drawings. The purpose of this report is to share the information gathered during the Nucla circulating AFBC demonstration project and present it so that the general public can evaluate the technical feasibility and cost effectiveness of replacing pulverized or stoker-fired boiler units with circulating fluidized-bed boiler units. (VC)

  17. Assessing the benefits of OHER (Office of Health and Environmental Research) research: Three case studies

    SciTech Connect (OSTI)

    Nesse, R.J.; Callaway, J.M.; Englin, J.E.; Klan, M.S.; Nicholls, A.K.; Serot, D.E.

    1987-09-01T23:59:59.000Z

    This research was undertaken to estimate the societal benefits and costs of selected past research performed for the Office of Health and Environmental Research (OHER) of the US Department of Energy (DOE). Three case studies of representative OHER and DOE research were performed. One of these, the acid rain case study, includes research conducted elsewhere in DOE. The other two cases were the OHER marine research program and the development of high-purity germanium that is used in radiation detectors. The acid rain case study looked at the research benefits and costs of furnace sorbent injection and duct injection, technologies that might reduce acid deposition precursors. Both appear to show benefits in excess of costs. We examined in detail one of the OHER marine research program's accomplishments - the increase in environmental information used by the Outer Continental Shelf leasing program to manage bidding for off-shore oil drilling. The results of an econometric model show that environmental information of the type supported by OHER is unequivocally linked to government and industry leasing decisions. The germanium case study indicated that the benefits of germanium radiation detectors were significant.

  18. LIMB Demonstration Project Extension

    SciTech Connect (OSTI)

    Not Available

    1991-09-15T23:59:59.000Z

    The basic goal of the Limestone Injection Multistage Burner (LIMB) demonstration is to extend LIMB technology development to a full- scale application on a representative wall-fired utility boiler. The successful retrofit of LIMB to an existing boiler is expected to demonstrate that (1) reductions of 50 percent or greater in SO{sub x} and NO{sub x} emissions can be achieved at a fraction of the cost of add-on FGD systems; (2) boiler reliability, operability, and steam production can be maintained at levels existing prior to LIMB retrofit; and (3) technical difficulties attributable to LIMB operation, such as additional slagging and fouling, changes in ash disposal requirements, and an increased particulate load, can be resolved in a cost-effective manner. The primary fuel to be used will be an Ohio bituminous coal having a nominal sulfur content of 3 percent or greater. The demonstration project consists of several distinct phases: a preliminary phase to develop the LIMB process design applicable to the host boiler, a construction and start-up phase, and an operating and evaluation phase. The first major activity, the development of the Edgewater LIMB design, was completed in January 1986 and detailed engineering is now complete. Major boiler-related components were installed during a September 1986 boiler outage. Start-up activities began in March of 1987 with tuning of the low NO{sub x} burners. Sorbent injection activities were underway as of July 1987. 3 figs.

  19. LIMB Demonstration Project Extension

    SciTech Connect (OSTI)

    Not Available

    1990-09-21T23:59:59.000Z

    The DOE LIMB Demonstration Project Extension is a continuation of the EPA Limestone Injection Multistage Burner (LIMB) Demonstration. EPA ultimately expects to show that LIMB is a low cost control technology capable of producing moderate SO{sub x} and NO{sub x} control (50--60 percent) with applicability for retrofit to the major portion of the existing coal-fired boiler population. The current EPA Wall-Fired LIMB Demonstration is a four-year project that includes design and installation of a LIMB system at the 105-MW Unit 4 boiler at Ohio Edison's Edgewater Station in Lorain, Ohio. LIMB Extension testing continued during the quarter with lignosulfonated hydrated lime, pulverized limestone, and hydrated dolomitic lime while firing 1.8% and 3% sulfur coals. Sulfur dioxide removal efficiencies were equivalent to the results found during EPA, base LIMB testing. Sulfur dioxide removal efficiencies were lower than expected while testing with pulverized limestone without humidification. A slight increase in sulfur capture was noted while injecting pulverized limestone at the 187' elevation and with the humidifier outlet temperature at 145{degree}F.

  20. Case studies of energy efficiency financing in the original five pilot states, 1993-1996

    SciTech Connect (OSTI)

    Farhar, B.C.; Collins, N.E.; Walsh, R.W.

    1997-05-01T23:59:59.000Z

    The purpose of this report is to document progress in state-level programs in energy efficiency financing programs that are linked with home energy rating systems. Case studies are presented of programs in five states using a federal pilot program to amortize the costs of home energy improvements. The case studies present background information, describe the states` program, list preliminary evaluation data and findings, and discuss problems and solution encountered in the programs. A comparison of experiences in pilot states will be used to provide guidelines for program implementers, federal agencies, and Congress. 5 refs.

  1. PURPA Resource Development in the Pacific Northwest : Case Studies of Ten Electricity Generating Powerplants.

    SciTech Connect (OSTI)

    Washington State Energy Office.

    1990-07-01T23:59:59.000Z

    The case studies in this document describe the Public Utilities, Regulatory Policies Act (PURPA) development process for a variety of generating technologies. Developer interactions with regulatory agencies and power purchasers are described in some detail. Equipment, installation, and maintenance costs are identified; power marketing considerations are taken into account; and potential environmental impacts, with corresponding mitigation approaches and practices are summarized. The project development case studies were prepared by the energy agencies of the four Northwest states, under contract to the Bonneville Power Administration.

  2. A Review of Published Analyses of Case-Cohort Studies and Recommendations for Future Reporting

    E-Print Network [OSTI]

    Sharp, Stephen J.; Poulaliou, Manon; Thompson, Simon G.; White, Ian R.; Wood, Angela M.

    2014-06-27T23:59:59.000Z

    of Case-Cohort Studies and Recommendations for Future Reporting. PLoS ONE 9(6): e101176. doi:10.1371/journal.pone.0101176 Editor: Joel Joseph Gagnier, University of Michigan, United States of America Received April 2, 2014; Accepted June 3, 2014; Published... A Review of Published Analyses of Case-Cohort Studies and Recommendations for Future Reporting Stephen J. Sharp1*, Manon Poulaliou2, Simon G. Thompson3, Ian R. White4, Angela M. Wood3 1Medical Research Council Epidemiology Unit, University...

  3. A Case Study of Global Perspective Change From Selected Study Abroad Program Participation

    E-Print Network [OSTI]

    Cockerell, Lauren

    2012-12-10T23:59:59.000Z

    This study examined selected components of faculty-led study abroad programs and determined students’ changes in global perspectives after participating in faculty-led study abroad programs. A census of the population of interest (N=19), included...

  4. Denver Federal Center Saves Energy, Forges Partnerships Through Super ESPC. Federal Energy Management Program (FEMP) ESPC Case Study

    SciTech Connect (OSTI)

    Not Available

    2002-01-01T23:59:59.000Z

    The General Services Administration is not just replacing aging heating and cooling equipment and reducing maintenance costs at the 670-acre Denver Federal Center (DFC). The GSA is also helping the government save about $450,000 in annual energy costs, conserve nearly 11 million gallons of water per year, and reduce annual carbon dioxide emissions by 15.9 million pounds, all by making use of the Department of Energy's Super Energy Savings Performance Contracts (Super ESPCs) at the DFC. Under these contracts, an energy services provider pays the up-front project costs and is then repaid over the contracts term out of the resulting energy cost savings. This two-page case study, prepared by NREL for the DOE Federal Energy Management Program (FEMP), demonstrates how the GSA forged new project partnerships, improved the DFCs boiler plant, and acquired efficient new chillers, motors, controls, and lighting by placing two delivery orders for this work under FEMPs Central Region Super ESPC.

  5. NAVAJO ELECTRIFICATION DEMONSTRATION PROJECT

    SciTech Connect (OSTI)

    Terry W. Battiest

    2008-06-11T23:59:59.000Z

    The Navajo Electrification Demonstration Project (NEDP) is a multi-year project which addresses the electricity needs of the unserved and underserved Navajo Nation, the largest American Indian tribe in the United States. The program serves to cumulatively provide off-grid electricty for families living away from the electricty infrastructure, line extensions for unserved families living nearby (less than 1/2 mile away from) the electricity, and, under the current project called NEDP-4, the construction of a substation to increase the capacity and improve the quality of service into the central core region of the Navajo Nation.

  6. Residential Transactive Control Demonstration

    SciTech Connect (OSTI)

    Widergren, Steven E.; Fuller, Jason C.; Marinovici, Maria C.; Somani, Abhishek

    2014-02-19T23:59:59.000Z

    Arguably the most exciting aspect of the smart grid vision is the full participation of end-use resources with all forms of generation and energy storage in the reliable and efficient operation of an electric power system. Engaging all of these resources in a collaborative manner that respects the objectives of each resource, is sensitive to the system and local constraints of electricity flow, and scales to the large number of devices and systems participating is a grand challenge. Distributed decision-making system approaches have been presented and experimentation is underway. This paper reports on the preliminary findings of a residential demand response demonstration that uses the bidding transactions of supply and end-use air conditioning resources communicating with a real-time, 5 minute market to balance the various needs of the participants on a distribution feeder. The nature of the demonstration, the value streams being explored, and the operational scenarios implemented to characterize the system response are summarized along with preliminary findings.

  7. Pilot Demonstration of Phased Retrofits in Florida Homes (Fact Sheet), Building America Case Study: Whole-House Solutions for Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOilNEWResponse(Expired)of Energy PhotothePicture Picture Picture

  8. An approach to model validation and model-based prediction -- polyurethane foam case study.

    SciTech Connect (OSTI)

    Dowding, Kevin J.; Rutherford, Brian Milne

    2003-07-01T23:59:59.000Z

    Enhanced software methodology and improved computing hardware have advanced the state of simulation technology to a point where large physics-based codes can be a major contributor in many systems analyses. This shift toward the use of computational methods has brought with it new research challenges in a number of areas including characterization of uncertainty, model validation, and the analysis of computer output. It is these challenges that have motivated the work described in this report. Approaches to and methods for model validation and (model-based) prediction have been developed recently in the engineering, mathematics and statistical literatures. In this report we have provided a fairly detailed account of one approach to model validation and prediction applied to an analysis investigating thermal decomposition of polyurethane foam. A model simulates the evolution of the foam in a high temperature environment as it transforms from a solid to a gas phase. The available modeling and experimental results serve as data for a case study focusing our model validation and prediction developmental efforts on this specific thermal application. We discuss several elements of the ''philosophy'' behind the validation and prediction approach: (1) We view the validation process as an activity applying to the use of a specific computational model for a specific application. We do acknowledge, however, that an important part of the overall development of a computational simulation initiative is the feedback provided to model developers and analysts associated with the application. (2) We utilize information obtained for the calibration of model parameters to estimate the parameters and quantify uncertainty in the estimates. We rely, however, on validation data (or data from similar analyses) to measure the variability that contributes to the uncertainty in predictions for specific systems or units (unit-to-unit variability). (3) We perform statistical analyses and hypothesis tests as a part of the validation step to provide feedback to analysts and modelers. Decisions on how to proceed in making model-based predictions are made based on these analyses together with the application requirements. Updating modifying and understanding the boundaries associated with the model are also assisted through this feedback. (4) We include a ''model supplement term'' when model problems are indicated. This term provides a (bias) correction to the model so that it will better match the experimental results and more accurately account for uncertainty. Presumably, as the models continue to develop and are used for future applications, the causes for these apparent biases will be identified and the need for this supplementary modeling will diminish. (5) We use a response-modeling approach for our predictions that allows for general types of prediction and for assessment of prediction uncertainty. This approach is demonstrated through a case study supporting the assessment of a weapons response when subjected to a hydrocarbon fuel fire. The foam decomposition model provides an important element of the response of a weapon system in this abnormal thermal environment. Rigid foam is used to encapsulate critical components in the weapon system providing the needed mechanical support as well as thermal isolation. Because the foam begins to decompose at temperatures above 250 C, modeling the decomposition is critical to assessing a weapons response. In the validation analysis it is indicated that the model tends to ''exaggerate'' the effect of temperature changes when compared to the experimental results. The data, however, are too few and to restricted in terms of experimental design to make confident statements regarding modeling problems. For illustration, we assume these indications are correct and compensate for this apparent bias by constructing a model supplement term for use in the model-based predictions. Several hypothetical prediction problems are created and addressed. Hypothetical problems are used because no guidance was provided concern

  9. study will be needed to determine whether this is the case.

    E-Print Network [OSTI]

    Hartl, Daniel L.

    study will be needed to determine whether this is the case. Finally, there are at least three other but deserve further consideration: (i) Our model predicts that a rise in H2 concentration at the surface effects on microbial communities. References and Notes 1. J. M. Ogden, Annu. Rev. Energy Environ. 24, 227

  10. Dynamic Management of Internet Telephony Servers: A Case Study based on JavaBeans and JDMK

    E-Print Network [OSTI]

    management systems. The results of our work allow us to evaluate JDMK regarding its suitability for the mana such as CORBA and JavaBeans are gaining in- creasing importance for the integrated management of net- worksDynamic Management of Internet Telephony Servers: A Case Study based on JavaBeans and JDMK

  11. Construction Sets and Unmarked Forms: A Case Study for Hungarian Verbal Agreement

    E-Print Network [OSTI]

    Steels, Luc

    Construction Sets and Unmarked Forms: A Case Study for Hungarian Verbal Agreement Katrien Beuls Abstract Construction application can be made more efficient by organizing con- structions into sets and by imposing an ordering on when a construction set should be considered. This technique gives us moreover

  12. FLEX AND PINCH: A CASE STUDY OF WHOLE HAND INPUT DESIGN FOR VIRTUAL ENVIRONMENT INTERACTION

    E-Print Network [OSTI]

    Pattanaik, Sumanta N.

    FLEX AND PINCH: A CASE STUDY OF WHOLE HAND INPUT DESIGN FOR VIRTUAL ENVIRONMENT INTERACTION JOSEPH J. LAVIOLA JR. and ROBERT C. ZELEZNIK Brown University Site of the NSF Science and Technology Center. In this paper, we describe our Pinch Glove like input device which is used as a tool to augment bend

  13. Impact of current-wave interaction on storm surge simulation: A case study for Hurricane Bob

    E-Print Network [OSTI]

    Chen, Changsheng

    Impact of current-wave interaction on storm surge simulation: A case study for Hurricane Bob,2 Received 2 January 2013; revised 5 April 2013; accepted 18 April 2013; published 30 May 2013. [1] Hurricane was developed and applied to simulate and examine the coastal ocean responses to Hurricane Bob. Results from

  14. Robot Deception and Squirrel Behavior: A Case Study in Bioinspired Robotics

    E-Print Network [OSTI]

    Robot Deception and Squirrel Behavior: A Case Study in Bio­inspired Robotics Jaeeun Shim and Ronald C. Arkin Mobile Robot Laboratory, School of Interactive Computing Georgia Institute of Technology and human beings is deception. Deceptive behavior in robotics is potentially beneficial in several domains

  15. Cooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots

    E-Print Network [OSTI]

    Stryk, Oskar von

    . I. INTRO With the growing importance of autonomous mobile robots in industrial and researchCooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots Jutta- ation of a strongly heterogeneous robot team, composed of a highly articulated humanoid robot

  16. Business Intelligence Modeling: A Case Study of Disaster Management Organization in Pakistan

    E-Print Network [OSTI]

    Fong, Chi Chiu "Simon"

    Business Intelligence Modeling: A Case Study of Disaster Management Organization in Pakistan Sohail Asghar Department of Computer Science Mohammad Ali Jinnah University, Islamabad, Pakistan e-mail: sohail@umac.mo Touqeer Hussain Shaheed Zulfikar Ali Bhutto Institute of Science and Technology, Islamabad, Pakistan e

  17. Treatment of septage in sludge drying reed beds: a case study on pilot-scale beds

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Treatment of septage in sludge drying reed beds: a case study on pilot-scale beds S. Troesch***, A systems by local authorities. This will result in a large increase of the quantity of sludge from septic to treat this sludge because they may have reached their nominal load or they are not so numerous in rural

  18. Walking in Facebook: A Case Study of Unbiased Sampling of OSNs

    E-Print Network [OSTI]

    Markopoulou, Athina

    Walking in Facebook: A Case Study of Unbiased Sampling of OSNs Minas Gjoka Networked Systems UC of Facebook users by crawling its social graph. In this quest, we consider and implement several candidate to the best of our knowledge unbiased sample of Facebook. Finally, we use one of our representative datasets

  19. Case Study of Undrained Strength Stability Analysis for Dredged Material Placement Areas

    E-Print Network [OSTI]

    Case Study of Undrained Strength Stability Analysis for Dredged Material Placement Areas Timothy D perimeter dike at the Craney Island Dredged Material Management Area CIDMMA using an undrained strength of the effective overburden stress of the dredged material and the marine clay underlying the dike. An undrained

  20. A case study of boundary layer ventilation by convection and coastal processes

    E-Print Network [OSTI]

    Dacre, Helen

    A case study of boundary layer ventilation by convection and coastal processes H. F. Dacre,1 S. L; published 12 September 2007. [1] It is often assumed that ventilation of the atmospheric boundary layer responsible for ventilation of the atmospheric boundary layer during a nonfrontal day that occurred on 9 May

  1. A Competency-Based Learning Resource Retrieval Process : The LUISA-UHP Case-Study

    E-Print Network [OSTI]

    Boyer, Edmond

    A Competency-Based Learning Resource Retrieval Process : The LUISA-UHP Case-Study Monique Grandbastien1 1 LORIA, Université Henri Poincaré Nancy1, France monique.grandbastien@loria.fr Abstract to the major challenges in the search, interchange and delivery of learning objects in a inria-00423930,version

  2. Case Study: Sustained Utility Cost Reduction in a Large Manufacturing Facility

    E-Print Network [OSTI]

    Fiorino, D.

    2004-01-01T23:59:59.000Z

    This case study presents results of a systematic utility cost reduction plan implemented at a 450,000 sq. ft. manufacturing facility in a hot and humid climate. Electricity, natural gas, and water usage were all reduced on an absolute basis in both...

  3. Wind power resource assessment in complex urban environments: MIT campus case-study using CFD Analysis

    E-Print Network [OSTI]

    Wind power resource assessment in complex urban environments: MIT campus case-study using CFD of Technology, 2Meteodyn Objectives Conclusions References [1] TopoWind software, User Manual [2] Wind Resource Assessment Handbook: Fundamentals for Conducting a Successful Wind Monitoring Program, AWS Scientific, Inc

  4. R and Data Mining: Examples and Case Studies1 2 Yanchang Zhao

    E-Print Network [OSTI]

    St Andrews, University of

    R and Data Mining: Examples and Case Studies1 2 Yanchang Zhao yanchangzhao@gmail.com http://www.RDataMining for Data Mining. #12;Contents List of Figures v List of Tables vii List of Abbreviations ix 1 Introduction 1 1.1 Data Mining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1

  5. DOE Zero Energy Ready Home Case Study, e2Homes, Winterpark, FL, Custom Homes

    Broader source: Energy.gov [DOE]

    Case study of a DOE Zero Energy Ready Home in Winter Park, FL that scored HERS 57 without PV or HERS -7 with PV. This 4,305 ft2 custom home has autoclaved aerated concrete walls, a sealed attic with R-20 spray foam, and ductless mini-split heat pumps.

  6. Looped carbon capturing and environmental remediation: case study of magnetic polypropylene nanocomposites{

    E-Print Network [OSTI]

    Guo, John Zhanhu

    Looped carbon capturing and environmental remediation: case study of magnetic polypropylene carbon nanocomposites (MCNCs) and simultaneously produce useful chemical species which can be utilized a distribution of species with different numbers of carbon, while only 40% of pure PP is decomposed after

  7. Risk-based modelling of surface water quality: a case study of the Charles River, Massachusetts

    E-Print Network [OSTI]

    Wagener, Thorsten

    : Water quality; Risk; Monte Carlo; Sensitivity analysis; Eutrophication 1. Introduction 1.1. Motivation recognised in the development of some decision-support tools, for example, QUAL2E- UNCAS (Brown and BarnwellRisk-based modelling of surface water quality: a case study of the Charles River, Massachusetts

  8. Calibration and Test Time Reduction Techniques for Digitally-Calibrated Designs: an ADC Case Study

    E-Print Network [OSTI]

    Calibration and Test Time Reduction Techniques for Digitally-Calibrated Designs: an ADC Case Study with a digital calibration capability could achieve significant performance improvement through calibration. However, the calibration process often takes a long time--in the order of hundreds of milliseconds or even

  9. Teaching integration with layers and representations: A case study Joshua Von Korff and N. Sanjay Rebello

    E-Print Network [OSTI]

    Zollman, Dean

    Teaching integration with layers and representations: A case study Joshua Von Korff and N. Sanjay to facilitate learning of integration in a physics context. We implemented this sequence with a single college characterizes integration in terms of layers and representations. We describe how Amber learned to give oral

  10. Plasma environment in the wake of Titan from hybrid simulation: A case study

    E-Print Network [OSTI]

    Gurnett, Donald A.

    Plasma environment in the wake of Titan from hybrid simulation: A case study R. Modolo,1 G. M] On 26 December 2005, the Cassini spacecraft flew through Titan's plasma wake and revealed a complex position of the wake. Two distinct plasma regions are identified with a significant difference

  11. Nyman RNR 3108 Renewable Natural Resources 3108: CASE STUDIES IN HABITAT

    E-Print Network [OSTI]

    Nyman, John

    Nyman RNR 3108 Renewable Natural Resources 3108: CASE STUDIES IN HABITAT RESTORATION Syllabus:30 to 1:20; Thursdays, Room 141 Renewable Natural Resources Building Laboratory: 1:30-4:20, Thursdays, departs from Room 141, Renewable Natural Resources Building. Field notebooks are required for all field

  12. Case Study 1 Detection of Oil Slicks using MODIS and SAR

    E-Print Network [OSTI]

    Meyers, Steven D.

    ecosystems. Every year, huge quantities of oil and petroleum products enter the sea, land, and groundwaterCase Study 1 Detection of Oil Slicks using MODIS and SAR Imagery Chuanmin Hu1 , Xiaofeng Li2 , William G. Pichel3 1.1 Background Oil pollution can cause extensive damage to marine and terrestrial

  13. A SEMI-AUTOMATIC METHOD FOR CASE ACQUISITION IN CBR A STUDY IN OIL WELL DRILLING

    E-Print Network [OSTI]

    Aamodt, Agnar

    A SEMI-AUTOMATIC METHOD FOR CASE ACQUISITION IN CBR A STUDY IN OIL WELL DRILLING Samad Valipour, Norway valipour@ntnu.no, agnar.aamodt@idi.ntnu.no, pal.skalle@ntnu.no ABSTRACT Oil well drilling operation is a complex process, in which there are always new lessons learned during drilling operation

  14. Erosion at Decommissioned Road-Stream Crossings: Case Studies from Three

    E-Print Network [OSTI]

    Standiford, Richard B.

    the dominant process and incorporate any lessons learned into future projects. Sites were also intentionally53 Erosion at Decommissioned Road-Stream Crossings: Case Studies from Three Northern California-treatment erosion was observed for 41 decommissioned road stream crossings in three northern California watersheds

  15. VALIDATION OF PV PERFORMANCE MODELS USING SATELLITE-BASED IRRADIANCE MEASUREMENTS: A CASE STUDY

    E-Print Network [OSTI]

    Perez, Richard R.

    VALIDATION OF PV PERFORMANCE MODELS USING SATELLITE-BASED IRRADIANCE MEASUREMENTS: A CASE STUDY Clean Power Research Kirkland, WA e-mail: aparkins@cleanpower.com ABSTRACT Photovoltaic (PV) system and existing PV systems under a wide variety of environmental conditions. Ground based meteorological

  16. Hazard Detection in a GALS Wrapper: a Case study Christian Stahl

    E-Print Network [OSTI]

    Freytag, Johann-Christoph

    Hazard Detection in a GALS Wrapper: a Case study Christian Stahl Humboldt-Universit¨at zu Berlin An asynchronous wrapper of a fabricated GALS system is analyzed for hazards. For this purpose a Petri net based modelling approach of this GALS wrapper is presented. In our model the question whether a hazard can occur

  17. Signals Passed at Danger: A Case Study in the Application of Visualisation Techniques

    E-Print Network [OSTI]

    Johnson, Chris

    Signals Passed at Danger: A Case Study in the Application of Visualisation Techniques Fraser Speirs over 800,000 records. This paper presents the reporting of Signals Passed at Danger (SPAD) - the term used to describe an incident when a train passes a signal displaying a danger aspect without

  18. Learning Business Process Models: A case study Johny Ghattas, Pnina Soffer, Mor Peleg

    E-Print Network [OSTI]

    Peleg, Mor

    Learning Business Process Models: A case study Johny Ghattas, Pnina Soffer, Mor Peleg Management the application of LPM to a vaccination process. Keywords: Learning, business process model, generic process model the currently defined process model and the actual business process are detected. This forms the basis

  19. From top-level to domain ontologies: Ecosystem classifications as a case study

    E-Print Network [OSTI]

    Bittner, Thomas

    From top-level to domain ontologies: Ecosystem classifications as a case study Thomas Bittner at Buffalo Abstract. This paper shows how to use a top-level ontology to create robust and logically coherent definitions formally using the top-level terms whose seman- tics was specified rigorously in a logic-based top

  20. Toward Distributed Intelligent: A Case Study of Peer to Peer Communication in Smart Grid

    E-Print Network [OSTI]

    Wang, Wenye

    Toward Distributed Intelligent: A Case Study of Peer to Peer Communication in Smart Grid Mingkui, Raleigh, NC, USA Email: {mwei2, wwang}@ncsu.edu Abstract--Smart grid is an emerging cyber-physical system. As a result, traditional centralized control is not always effective in smart grid, and distributed control

  1. Case Study: A Visual Tool for Moving Mesh Numerical Methods Daryl H. Hepting \\Lambda

    E-Print Network [OSTI]

    Zhang, Richard "Hao"

    . Com­ puter visualization of moving mesh methods is an extension of an approach using computersCase Study: A Visual Tool for Moving Mesh Numerical Methods Daryl H. Hepting \\Lambda darylh differential equations are indispensable in scientific and engineering research, where they are used to model

  2. Citizen Science Case Study: The Great Sunflower Project Nathan R. Prestopnik

    E-Print Network [OSTI]

    Crowston, Kevin

    Citizen Science Case Study: The Great Sunflower Project Nathan R. Prestopnik Syracuse University napresto@syr.edu Abstract The Great Sunflower Project is a citizen science project designed to collect play in citizen science implementations, and the debate between custom website development

  3. Automated Data Verification in a Large-scale Citizen Science Project: a Case Study

    E-Print Network [OSTI]

    Wong, Weng-Keen

    Automated Data Verification in a Large-scale Citizen Science Project: a Case Study Jun Yu1 , Steve,jag73}@cornell.edu Abstract-- Although citizen science projects can engage a very large number with eBird, which is a broad-scale citizen science project to collect bird observations, has shown

  4. Residential Energy Simulation and Scheduling: A Case Study Approach Jagannathan Venkatesh, Baris Aksanli, Tajana Simuni Rosing

    E-Print Network [OSTI]

    Simunic, Tajana

    Residential Energy Simulation and Scheduling: A Case Study Approach Jagannathan Venkatesh, Baris, baksanli, tajana}@ucsd.edu Abstract-- Residential energy contributes to 38% of the total energy consumption or by providing energy information to consumers. Industrial innovations are focused on energy efficiency

  5. Sustainability of terrestrial carbon sequestration: A case study in Duke Forest with inversion approach

    E-Print Network [OSTI]

    DeLucia, Evan H.

    Sustainability of terrestrial carbon sequestration: A case study in Duke Forest with inversion of terrestrial carbon (C) sequestration is critical for the success of any policies geared toward stabilizing. Ellsworth, A. Finzi, J. Lichter, and W. H. Schlesinger, Sustainability of terrestrial carbon sequestration

  6. OCEAN CARBON SEQUESTRATION: A CASE STUDY IN PUBLIC AND INSTITUTIONAL PERCEPTIONS

    E-Print Network [OSTI]

    OCEAN CARBON SEQUESTRATION: A CASE STUDY IN PUBLIC AND INSTITUTIONAL PERCEPTIONS M. A. de and institutional perceptions for future carbon sequestration projects. INTRODUCTION The United States Department scrutiny. DOE, NEDO and NRC agreed to an initial field experiment on ocean carbon sequestration via direct

  7. A Case Study on Reactive Protocols for Aircraft Electric Power Distribution

    E-Print Network [OSTI]

    Xu, Huan

    A Case Study on Reactive Protocols for Aircraft Electric Power Distribution Huan Xu1, Ufuk Topcu2 electric power system that meets system requirements and reacts dynamically to changes in internal system to more-electric aircraft architectures possible. Conventional architectures utilize a combination

  8. Towards Availability Benchmarks: A Case Study of Software RAID Systems Aaron Brown and David A. Patterson

    E-Print Network [OSTI]

    California at Berkeley, University of

    Towards Availability Benchmarks: A Case Study of Software RAID Systems Aaron Brown and David A neglected the areas of availability, maintainability, and evolutionary growth, areas that have recently introduce a general methodology for bench- marking the availability of computer systems. Our methodology

  9. Urban Stormwater and Watershed Management: A Case Study James P. Heaney, Len Wright, and David Sample

    E-Print Network [OSTI]

    Pitt, Robert E.

    classified as Decision Support Systems (DSS) (Loucks 1995). Contemporary DSS's contain a mixture9-1 Chapter 9 Urban Stormwater and Watershed Management: A Case Study James P. Heaney, Len Wright. The concept of integrated water and land management was first articulated in the western U.S. by John Wesley

  10. The Riacho Fundo water basin: a case study for qualitative modelling sustainable development

    E-Print Network [OSTI]

    Bailey-Kellogg, Chris

    of sustainable development related problems. The models aim at supporting stakeholders to understand the systemsThe Riacho Fundo water basin: a case study for qualitative modelling sustainable development Paulo presents a working plan for modelling relevant aspects of sustainability issues in the Riacho Fundo water

  11. Disturbances in Body Ownership in Schizophrenia: Evidence from the Rubber Hand Illusion and Case Study

    E-Print Network [OSTI]

    Park, Sohee

    Disturbances in Body Ownership in Schizophrenia: Evidence from the Rubber Hand Illusion and Case to psychotic experiences. Body ownership, one component of self- awareness, can be studied with the rubber hand illusion (RHI). Watching a rubber hand being stroked while one's unseen hand is stroked synchronously can

  12. Protective Wrapper Development: A Case Study Tom Anderson, Mei Feng, Steve Riddle, Alexander Romanovsky

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    appropriate recovery actions. This paper presents results of a case study in protective wrapper development, using a Simulink model of a steam boiler system together with an OTS PID (Proportional, Integral tolerance techniques proceed by employing redundant software in some form; for example, recovery blocks, N

  13. The Influence of Organizational Structure on Software Quality: An Empirical Case Study

    E-Print Network [OSTI]

    Basili, Victor R.

    The Influence of Organizational Structure on Software Quality: An Empirical Case Study Nachiappan this assertion. In this paper we present a metric scheme to quantify organizational complexity, in relation, the organizational metrics when applied to data from Windows Vista were statistically significant predictors

  14. Hydropower production and river rehabilitation: A case study on an alpine river

    E-Print Network [OSTI]

    Hydropower production and river rehabilitation: A case study on an alpine river M. Fette & C. Weber # Springer Science + Business Media B.V. 2006 Abstract Despite the numerous benefits of hydropower production. Hydropeaks, caused by short-term changes in hydropower operation, result in a negative impact on both habitat

  15. HYDROPOWER RESERVOIR FOR FLOOD CONTROL: A CASE STUDY ON RINGLET RESERVOIR, CAMERON

    E-Print Network [OSTI]

    Julien, Pierre Y.

    HYDROPOWER RESERVOIR FOR FLOOD CONTROL: A CASE STUDY ON RINGLET RESERVOIR, CAMERON HIGHLANDS, Malaysia 4 Professor, Department of Civil Engineering, Colorado State University, USA ABSTRACT: Hydropower as possible for daily hydropower generation as well as to prevent any spillage at dam. However

  16. The Distribution of Online Healthcare Information: A Case Study on Melanoma

    E-Print Network [OSTI]

    Bhavnani, Suresh K.

    The Distribution of Online Healthcare Information: A Case Study on Melanoma Suresh K. Bhavnani of melanoma risk and prevention. A second inter-rater experiment analyzed how those facts were distributed to melanoma risk and prevention. The high inter-rater agreement enabled our research team to identify a set

  17. A Case Study of Chemical Organization Theory Applied to Virus Dynamics

    E-Print Network [OSTI]

    Dittrich, Peter

    A Case Study of Chemical Organization Theory Applied to Virus Dynamics Naoki Matsumaru1 , Pietro, Venezia, Italia * corresponding author Abstract. Chemical organization theory has been proposed to provide and Horn [10]. Here, we introduce chemical organization theory [11, 12] as another method to analyse

  18. De Bilt, 2012 | Trainee report Case study on the effect of aircraft induced

    E-Print Network [OSTI]

    Haak, Hein

    a warming effect on the total earth-atmosphere system (reference at TOA), because trapping of upwelling long wave solar irradiance at the land surface Kasper O. Gerritsen #12;#12;Case study on the effect of aircraft induced cloudiness on the short wave solar irradiance at the land surface Version 1.0 Date June

  19. Exploring the Use of a "Safe Subset" of Extreme Programming: An Industrial Case Study

    E-Print Network [OSTI]

    Reeves, Douglas S.

    of Computer Science {lawilli3, lmlayma2, aianton}@ncsu.edu 2 IBM Corporation, krebsw@us.ibm.com Contact Author, Department of Computer Science {lawilli3, lmlayma2, aianton}@ncsu.edu 2 IBM Corporation, krebsw@us.ibmExploring the Use of a "Safe Subset" of Extreme Programming: An Industrial Case Study Laurie

  20. Last Updated 5/2014 Case Study AD-21 Manure Management Program

    E-Print Network [OSTI]

    Walter, M.Todd

    type Complete mixed Digester designer EnviTec Biogas Date Commissioned June 2012 Influent Raw manure touring other biogas plants as well as received hands on training to prepare him to oversee the digester.manuremanagement.cornell.edu Anaerobic Digestion at Lawnhurst Farms: Case Study Michael Boerman, Curt Gooch, P.E. Jenny Pronto May 2014

  1. Optimal Industrial Load Control in Smart Grid: A Case Study for Oil Refineries

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    Optimal Industrial Load Control in Smart Grid: A Case Study for Oil Refineries Armen Gholian, Hamed units finish their operations. Considering an oil refinery industry as an example, we not only identify Terms­Demand response, load management, manufactur- ing industries, oil refineries, optimal scheduling

  2. Content Management Implemented as Shared Service: A Public Sector Case Study

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Content Management Implemented as Shared Service: A Public Sector Case Study Anton Joha1 and Marijn of content management (CM) shared services. As a new phenomenon, there is little understanding benefits. Keywords: Content Management, Public Sector, Shared Services, Sourcing 1. Introduction There has

  3. Medical Guidelines Reconciling Medical Software and Electronic Devices: Imatinib Case-study

    E-Print Network [OSTI]

    De Micheli, Giovanni

    Medical Guidelines Reconciling Medical Software and Electronic Devices: Imatinib Case-study Alena as specification of a medical system that includes both software and electronic devices. However, often medical GLs. INTRODUCTION Recently, the set of electronic medical devices has a tendency to be extended with a new class

  4. DNA Extraction From Processed Wood: A Case Study for the Identification of an Endangered

    E-Print Network [OSTI]

    Protocols DNA Extraction From Processed Wood: A Case Study for the Identification of an Endangered to the extraction of whole genomic DNA from processed wood samples to explore the possibility of identifying an endangered trop- ical timber species by using DNA sequencing technology. High-yield and high-quality DNA

  5. Industrial motivation for interactive shape modeling: a case study in conceptual automotive design

    E-Print Network [OSTI]

    Toronto, University of

    Industrial motivation for interactive shape modeling: a case study in conceptual automotive design illus- trated within the space of conceptual automotive design. Automo- tive design provides a unique but automotive designers almost exclusively work with sketches, clay and other traditional media. Design

  6. Product development with a focus on attractive product expression: an analysis of case studies

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Product development with a focus on attractive product expression: an analysis of case studies products is vital for a company's endurance in competitive markets. A mix of functionality, ergonomics, aesthetics, symbols and price aspects all play a role in making a product desirable. Some products carry

  7. Towards WSN-aided Navigation for Vehicles in Smart Cities : An Application Case Study

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Towards WSN-aided Navigation for Vehicles in Smart Cities : An Application Case Study Roudy Dagher--With the emergence of Smart City concept, Wireless Sensor Networks (WSNs) become one of the key technologies availability [1]. In this context, the concept of smart cities has attracted significant research interest

  8. Analyzing Software Evolvability of an Industrial Automation Control System: A Case Study

    E-Print Network [OSTI]

    Becker, Steffen

    Analyzing Software Evolvability of an Industrial Automation Control System: A Case Study Hongyu Pei and improving the evolvability of an industrial automation control system, and presents 1) evolvability Breivold1 , Ivica Crnkovic2 , Rikard Land2 , Magnus Larsson1 1 ABB Corporate Research, Industrial Software

  9. Mining Game Statistics from Web Services: A World of Warcraft Armory case study

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Mining Game Statistics from Web Services: A World of Warcraft Armory case study Chris Lewis, Noah publicly accessible web services allows us to quickly retrieve quantitative results. This will allow Applications]: Data Mining Keywords video game, world of warcraft, data mining, web service 1. INTRODUCTION

  10. On downstream hydraulic geometry and optimal energy expenditure: case study of the Ashley and Taieri Rivers

    E-Print Network [OSTI]

    Ramírez, Jorge A.

    On downstream hydraulic geometry and optimal energy expenditure: case study of the Ashley Abstract The downstream distribution of channel geometry and of the rate of energy expenditure per unit the network. We look at energy expenditure from two perspectives. (1) In the context of downstream hydraulic

  11. REDESIGNING A PHYSICAL DISTRIBUTION AND LOGISTICS SYSTEM: THE FEBAL CUCINE CASE STUDY 1

    E-Print Network [OSTI]

    Di Pillo, Gianni

    1 REDESIGNING A PHYSICAL DISTRIBUTION AND LOGISTICS SYSTEM: THE FEBAL CUCINE CASE STUDY 1 Fabio ABSTRACT The authors examine the questions of physical distribution and logistics management developed within the framework of an European project named ECOSELL is presented. Keywords: Logistics

  12. Applicability of Logistics Management in Lean Construction: a Case Study Approach in Brazilian Building Companies

    E-Print Network [OSTI]

    Tommelein, Iris D.

    Applicability of Logistics Management in Lean Construction: a Case Study Approach in Brazilian Building Companies Proceedings IGLC-7 147 APPLICABILITY OF LOGISTICS MANAGEMENT IN LEAN CONSTRUCTION Cardoso2 ABSTRACT Logistics management concepts and tools currently have a great value for several

  13. Metal-histidine-glutamate as a regulator of enzymatic cycles: a case study of carbonic anhydrasew

    E-Print Network [OSTI]

    Boyer, Edmond

    the reversible hydration of carbon dioxide.1 This fundamental reaction, involved in many physiological processesMetal-histidine-glutamate as a regulator of enzymatic cycles: a case study of carbonic anhydrasew common metal ligand in metalloenzymes. Besides being an efficient Lewis base, its electronic properties

  14. Emissions tradeoffs associated with cofiring forest biomass with coal: A case study in Colorado, USA

    E-Print Network [OSTI]

    Fried, Jeremy S.

    , especially in North America and Europe, promote the substitution of forest biomass for fossil fuels to helpEmissions tradeoffs associated with cofiring forest biomass with coal: A case study in Colorado mine and power plant. Model emissions tradeoffs of cofiring forest biomass with coal up to 20% by heat

  15. A Study Case of Restful Frameworks in Raspberry Pi: A Perfomance and Energy Overview

    E-Print Network [OSTI]

    Reiff-Marganiec, Stephan

    A Study Case of Restful Frameworks in Raspberry Pi: A Perfomance and Energy Overview Luiz H. Nunes of Mathematics and Computer Science (ICMC), Săo Carlos-SP, Brazil Email: {lhnunes, nakamura, heitorfv, mira, a testing environment and a performance and energy evaluation between them are presented. We show

  16. Linear programming applied to the ower sector: a Gladiolus bulb production case study

    E-Print Network [OSTI]

    Dragoti-Çela, Eranda

    Linear programming applied to the Żower sector: a Gladiolus bulb production case study Jose representative Brazilian bulb growing and trading company's decision making process, during the Gladiolus production planning activity. The pertinent LP model was focused on client's bulb requests to be attended

  17. The role of peat decomposition in patterned mires: a case study from the central Swiss Alps

    E-Print Network [OSTI]

    Bern, Universität

    The role of peat decomposition in patterned mires: a case study from the central Swiss Alps., Stefanova V., van Leeuwen J. F. N., van der Knaap W. O., Colombaroli D. & Tinner W. (2013): The role of peat and is unique in its pattern. In two of five pools there is in the contact zone between the basal peat

  18. DRUGS OF ABUSE IN URBANDRUGS OF ABUSE IN URBAN GROUNDWATER. A CASE STUDY

    E-Print Network [OSTI]

    Politècnica de Catalunya, Universitat

    in urban groundwater. A case study: Barcelona". Science of the Total Enviroment 424, 280-288. Doi: 10Reduction because of: Deteriorating quality #12;IntroductionThe problem Urban aquifers may suffer pollution from different recharge sourcesUrban aquifers may suffer pollution from different recharge sources As a result

  19. Kekule's Benzene Structure: A Case Study of Teaching Usefulness of Symmetry

    E-Print Network [OSTI]

    Kreinovich, Vladik

    Kekul´e's Benzene Structure: A Case Study of Teaching Usefulness of Symmetry Olga Kosheleva1 at El Paso 500 W. University El Paso, TX 79968, USA olgak@utep.edu, vladik@utep.edu Abstract Benzene is one of the basic building blocks of organic molecules. One of the reasons for benzene's ubiquity

  20. LETTER TO THE EDITOR Regarding ``Meta-analysis and Causal Inference: A Case Study of Benzene

    E-Print Network [OSTI]

    California at Berkeley, University of

    LETTER TO THE EDITOR Regarding ``Meta-analysis and Causal Inference: A Case Study of Benzene of a causal association between non-Hodgkin lymphoma (NHL) and benzene and between NHL and petroleum refinery identified provide ``further evidence that benzene exposure causes NHL.'' However, his review of each

  1. From Application to ASIP-based FPGA prototype: a Case Study on Turbo Decoding

    E-Print Network [OSTI]

    Muller, Olivier

    From Application to ASIP-based FPGA prototype: a Case Study on Turbo Decoding Olivier Muller, Amer turbo decoder. It introduces turbo decoding application and proposes an Application-Specific Instruction when decoding a double binary turbo code with 5 iterations. 1. Introduction Applications in the field

  2. RECOVERY OF POLLUTED ECOSYSTEMS: THE CASE FOR LONG-TERM STUDIES

    E-Print Network [OSTI]

    Power, Anne Marie

    in charting recovery from acute pollution incidents such as oil, chemical spills and pulses of mine1 RECOVERY OF POLLUTED ECOSYSTEMS: THE CASE FOR LONG-TERM STUDIES S. J. Hawkins1 , P. E. Gibbs1 , N, University of Southampton, SO17 1BJ, UK Recovery of marine ecosystems from known pollution has tended

  3. Impacts of exotic forest pathogens on Mediterranean ecosystems: four case studies

    E-Print Network [OSTI]

    California at Berkeley, University of

    , pollution, climate change and introduction of invasive species. Invasive tree pathogens are among planning assisted migration activities to enable plant species to cope with rapid climate change. KeywordsImpacts of exotic forest pathogens on Mediterranean ecosystems: four case studies Matteo Garbelotto

  4. Alternative Fuel Tool Kit Case Study on Compressed Natural Gas (CNG)

    E-Print Network [OSTI]

    need heavier trucks and vans to haul equipment, on the other hand, and they could be assigned either1 5/2014 Alternative Fuel Tool Kit Case Study on Compressed Natural Gas (CNG): Build adopted natural gas in 2011 because of the fuel's environmental and cost benefits. BuildSense's customers

  5. Data Mining for Autonomic System Management: A Case Study at FIU-SCIS

    E-Print Network [OSTI]

    Sadjadi, S. Masoud

    Data Mining for Autonomic System Management: A Case Study at FIU-SCIS Technical Report: FIU and Information Sciences (SCIS) at Florida International University (FIU). Keywords Data mining, autonomic for such computing systems. In this paper, we first present an integrated data-driven architecture for computing

  6. DATA NORMALIZATION FOR FOUNDATION SHM OF AN OFFSHORE WIND TURBINE : A REAL-LIFE CASE STUDY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    DATA NORMALIZATION FOR FOUNDATION SHM OF AN OFFSHORE WIND TURBINE : A REAL-LIFE CASE STUDY Wout the first results in the development of a SHM approach for the foun- dations of an offshore wind turbine the performance of the presented approach. KEYWORDS : Foundation Monitoring, Offshore Wind Turbine, Operational

  7. Assessing the operational life of flexible printed boards intended for continuous flexing applications : a case study.

    SciTech Connect (OSTI)

    Beck, David Franklin

    2011-01-01T23:59:59.000Z

    Through the vehicle of a case study, this paper describes in detail how the guidance found in the suite of IPC (Association Connecting Electronics Industries) publications can be applied to develop a high level of design assurance that flexible printed boards intended for continuous flexing applications will satisfy specified lifetime requirements.

  8. Recent regulatory experience of low-Btu coal gasification. Volume III. Supporting case studies

    SciTech Connect (OSTI)

    Ackerman, E.; Hart, D.; Lethi, M.; Park, W.; Rifkin, S.

    1980-02-01T23:59:59.000Z

    The MITRE Corporation conducted a five-month study for the Office of Resource Applications in the Department of Energy on the regulatory requirements of low-Btu coal gasification. During this study, MITRE interviewed representatives of five current low-Btu coal gasification projects and regulatory agencies in five states. From these interviews, MITRE has sought the experience of current low-Btu coal gasification users in order to recommend actions to improve the regulatory process. This report is the third of three volumes. It contains the results of interviews conducted for each of the case studies. Volume 1 of the report contains the analysis of the case studies and recommendations to potential industrial users of low-Btu coal gasification. Volume 2 contains recommendations to regulatory agencies.

  9. Jennings Demonstration PLant

    SciTech Connect (OSTI)

    Russ Heissner

    2010-08-31T23:59:59.000Z

    Verenium operated a demonstration plant with a capacity to produce 1.4 million gallons of cellulosic ethanol from agricultural resiues for about two years. During this time, the plant was able to evaluate the technical issues in producing ethanol from three different cellulosic feedstocks, sugar cane bagasse, energy cane, and sorghum. The project was intended to develop a better understanding of the operating parameters that would inform a commercial sized operation. Issues related to feedstock variability, use of hydrolytic enzymes, and the viability of fermentative organisms were evaluated. Considerable success was achieved with pretreatment processes and use of enzymes but challenges were encountered with feedstock variability and fermentation systems. Limited amounts of cellulosic ethanol were produced.

  10. Use of genomic data in risk assessment case study: II. Evaluation of the dibutyl phthalate toxicogenomic data set

    SciTech Connect (OSTI)

    Euling, Susan Y., E-mail: euling.susan@epa.gov [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Washington, DC (United States); White, Lori D. [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Kim, Andrea S. [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Washington, DC (United States); Sen, Banalata [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Wilson, Vickie S. [National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Keshava, Channa; Keshava, Nagalakshmi [National Center for Environmental Assessment, U.S. Environmental Protection Agency, Washington, DC (United States); Hester, Susan [National Health and Environmental Effects Research Laboratory, U.S. Environmental Protection Agency, Research Triangle Park, NC (United States); Ovacik, Meric A.; Ierapetritou, Marianthi G.; Androulakis, Ioannis P. [National Center for Environmental Research Science to Achieve Results (STAR) Bioinformatics Center, Environmental Bioinformatics and Computational Toxicology Center (ebCTC), Rutgers University and University of Medicine and Dentistry of New Jersey, Piscataway, NJ (United States); Gaido, Kevin W. [Center for Veterinary Medicine, U.S. Food and Drug Administration, Rockville, MD 20855 (United States)

    2013-09-15T23:59:59.000Z

    An evaluation of the toxicogenomic data set for dibutyl phthalate (DBP) and male reproductive developmental effects was performed as part of a larger case study to test an approach for incorporating genomic data in risk assessment. The DBP toxicogenomic data set is composed of nine in vivo studies from the published literature that exposed rats to DBP during gestation and evaluated gene expression changes in testes or Wolffian ducts of male fetuses. The exercise focused on qualitative evaluation, based on a lack of available dose–response data, of the DBP toxicogenomic data set to postulate modes and mechanisms of action for the male reproductive developmental outcomes, which occur in the lower dose range. A weight-of-evidence evaluation was performed on the eight DBP toxicogenomic studies of the rat testis at the gene and pathway levels. The results showed relatively strong evidence of DBP-induced downregulation of genes in the steroidogenesis pathway and lipid/sterol/cholesterol transport pathway as well as effects on immediate early gene/growth/differentiation, transcription, peroxisome proliferator-activated receptor signaling and apoptosis pathways in the testis. Since two established modes of action (MOAs), reduced fetal testicular testosterone production and Insl3 gene expression, explain some but not all of the testis effects observed in rats after in utero DBP exposure, other MOAs are likely to be operative. A reanalysis of one DBP microarray study identified additional pathways within cell signaling, metabolism, hormone, disease, and cell adhesion biological processes. These putative new pathways may be associated with DBP effects on the testes that are currently unexplained. This case study on DBP identified data gaps and research needs for the use of toxicogenomic data in risk assessment. Furthermore, this study demonstrated an approach for evaluating toxicogenomic data in human health risk assessment that could be applied to future chemicals. - Highlights: ? We evaluate the dibutyl phthalate toxicogenomic data for use in risk assessment. ? We focus on information about the mechanism of action for the developing testis. ? Multiple studies report effects on testosterone and insl3-related pathways. ? We identify additional affected pathways that may explain some testis effects. ? The case study is a template for evaluating toxicogenomic data in risk assessment.

  11. IEA Wind Task 24 Integration of Wind and Hydropower Systems; Volume 2: Participant Case Studies

    SciTech Connect (OSTI)

    Acker, T.

    2011-12-01T23:59:59.000Z

    This report describes the background, concepts, issues and conclusions related to the feasibility of integrating wind and hydropower, as investigated by the members of IEA Wind Task 24. It is the result of a four-year effort involving seven IEA member countries and thirteen participating organizations. The companion report, Volume 2, describes in detail the study methodologies and participant case studies, and exists as a reference for this report.

  12. Case Studies of Mass Transfer and Star Formation in Galaxy Collisions

    E-Print Network [OSTI]

    Curtis Struck

    2003-10-20T23:59:59.000Z

    The amount, timing and ultimate location of mass transfer and induced star formation in galaxy collisions are sensitive functions of orbital and galaxy structural parameters. I discuss the role of detailed case studies and describe the results for two systems, Arp 284 and NGC 2207/IC 2163, that have been studied with both multiwaveband observations, and detailed dynamical models. The models yield the mass transfer and compressional histories of the encounters and the ``probable causes'' or triggers of individual star-forming regions.

  13. Toward a Phenomenology of Revitalized Downtowns: A Case Study of Downtown Bryan, Texas

    E-Print Network [OSTI]

    Samuel, Nicholas Lynn

    2014-07-17T23:59:59.000Z

        TOWARD A PHENOMENOLOGY OF REVITALIZED DOWNTOWNS: A CASE STUDY OF DOWNTOWN BRYAN, TEXAS A Thesis by NICHOLAS LYNN SAMUEL Submitted to the Office of Graduate and Professional Studies of Texas A&M University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE Chair of Committee, Jonathan M. Smith Committee Members, Peter J. Hugill Michael O’Brien Head of Department, Vatche P. Tchakerian August 2014 Major Subject: Geography Copyright 2014 Nicholas Lynn Samuel...

  14. A study of toxic emissions from a coal-fired power plant utilizing an ESP while demonstrating the ICCT CT-121 FGD Project. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-06-16T23:59:59.000Z

    The US Department of Energy is performing comprehensive assessments of toxic emissions from eight selected coal-fired electric utility units. This program responds to the Clean Air Act Amendments of 1990, which require the US Environmental Protection Agency (EPA) to evaluate emissions of hazardous air pollutants (HAPs) from electric utility power plants for Potential health risks. The resulting data will be furnished to EPA utility power plants and health risk determinations. The assessment of emissions involves the collection and analysis of samples from the major input, process, and output streams of each of the eight power plants for selected hazardous Pollutants identified in Title III of the Clean Air Act. Additional goals are to determine the removal efficiencies of pollution control subsystems for these selected pollutants and the Concentrations associated with the particulate fraction of the flue gas stream as a function of particle size. Material balances are being performed for selected pollutants around the entire power plant and several subsystems to identify the fate of hazardous substances in each utility system. Radian Corporation was selected to perform a toxics assessment at a plant demonstrating an Innovative Clean Coal Technology (ICCT) Project. The site selected is Plant Yates Unit No. 1 of Georgia Power Company, which includes a Chiyoda Thoroughbred-121 demonstration project.

  15. Ten case history studies of energy efficiency improvements in pulp and paper mills. Final report

    SciTech Connect (OSTI)

    Not Available

    1981-01-01T23:59:59.000Z

    The ten technologies chosen for case history development are: sonic sootblowing in boilers, boiler operation on oil-water emulsified fuel, energy efficient motors, computerized control of excess air for boilers, boiler control and load allocation, driving of waste-activated sludge by multiple effect evaporation, pre-drying of hog fuel, lime kiln computerization, heat wheel for process heat recovery, and organic Rankine bottoming cycle for thermomechanical pulping heat recovery. For each case study, there is given: the company name, employee contact, plant summary, a description of the energy consuming process and of the energy-saving action, an assessment of energy savings, and the decision process leading to the adoption of the measure. A data summary for discounted cash flow analysis is tabulated for each case. (LEW)

  16. Case-control studies of genetic and environmental factors with error in measurement of environmental factors

    E-Print Network [OSTI]

    Lobach, Iryna

    2009-05-15T23:59:59.000Z

    environmental variables we used additive model of the form W = X + U, where U is generated from the Normal distribution with zero mean and variance = 0:25. Given the following haplotype frequencies (h1;h2;h3;h4;h5;h6) = (0:25;0:15;0:25;0:1;0:1;0:15) we... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Gene-Environment Interactions . . . . . . . . . . . . . . . . . 1 1.3 Prospective Analysis of Case-Control Studies . . . . . . . . . . 2 1.4 Measurement Error in Epidemiologic Studies . . . . . . . . . . 3 1.5 Haplotype-Based studies...

  17. Water Reclamation and Reuse at Fort Carson: Best Management Practice Case Study #14 - Alternate Water Sources (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-08-01T23:59:59.000Z

    FEMP Water Efficiency Best Management Practice #14 Case Study: Overview of the water reclamation and reuse program at the U.S. Army's Fort Carson.

  18. Pacific Northwest National Laboratory Grounds Maintenance: Best Management Practice Case Studies #4 and #5 - Water Efficient Landscape and Irrigation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-08-01T23:59:59.000Z

    FEMP Water Efficiency Best Management Practices #4 and #5 Case Study: Overview of the Pacific Northwest National Laboratory grounds maintenance program and results.

  19. A Technique for Demonstrating Safety and Correctness of Program Translators

    E-Print Network [OSTI]

    A Technique for Demonstrating Safety and Correctness of Program Translators : Strategy and Case Research Institute, Republic of Korea 2014-11-05 #12;2 Contents · 1. Introduction · 2. The Demonstration Strategy ­ 1. Safety demonstration ­ 2. Correctness demonstration · 3. The Development of Supporting Tools

  20. Building America Case Study: New Town Builders' Power of Zero Energy Center, Denver, Colorado (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-10-01T23:59:59.000Z

    New Town Builders, a builder of energy efficient homes in Denver, Colorado, offers a zero energy option for all the homes it builds. To attract a wide range of potential homebuyers to its energy efficient homes, New Town Builders created a 'Power of Zero Energy Center' linked to its model home in the Stapleton community of Denver. This case study presents New Town Builders' marketing approach, which is targeted to appeal to homebuyers' emotions rather than overwhelming homebuyers with scientific details about the technology. The exhibits in the Power of Zero Energy Center focus on reduced energy expenses for the homeowner, improved occupant comfort, the reputation of the builder, and the lack of sacrificing the homebuyers' desired design features to achieve zero net energy in the home. The case study also contains customer and realtor testimonials related to the effectiveness of the Center in influencing homebuyers to purchase a zero energy home.