National Library of Energy BETA

Sample records for delhi delhi nct

  1. New Delhi, India: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    India RE News India Registered Energy Companies in New Delhi, India Enviro Energy Enterprises India National Hydrogen Energy Board NHEB Indian Ministry of New and Renewable...

  2. Status of the first batch of niobium resonator production for the New Delhi booster linac.

    SciTech Connect (OSTI)

    Potukuchi, P. N.

    1999-03-16

    This paper reports the status and details of the costs of construction of niobium superconducting resonant cavities for a linear accelerator, presently being built as a booster for the 15 UD tandem Pelletron accelerator at the Nuclear Science Centre, New Delhi. The linear accelerator will have three cryostat modules, each holding eight quarter-wave resonators. Construction of a batch of ten resonators for the linac started at Argonne National Laboratory in May 1997. For production, all fabrication and all electron beam welding is being done through commercial vendors. Details of construction and present status of the project are presented.

  3. Public-Private roundtables at the fourth Clean Energy Ministerial, 17-18 April 2013, New Delhi, India

    SciTech Connect (OSTI)

    Crowe, Tracey

    2013-06-30

    The Clean Energy Ministerial (CEM) is a high-level global forum to share best practices and promote policies and programs that advance clean energy technologies and accelerate the transition to a global clean energy economy. The CEM works to increase energy efficiency, expand clean energy supply, and enhance clean energy access worldwide. To achieve these goals, the CEM pursues a three-part strategy that includes high-level policy dialogue, technical cooperation, and engagement with the private sector and other stakeholders. Each year, energy ministers and other high-level delegates from the 23 participating CEM governments come together to discuss clean energy, review clean energy progress, and identify tangible next steps to accelerate the clean energy transition. The U.S. Department of Energy, which played a crucial role in launching the CEM, hosted the first annual meeting of energy ministers in Washington, DC, in June 2010. The United Arab Emirates hosted the second Clean Energy Ministerial in 2011, and the United Kingdom hosted the third Clean Energy Ministerial in 2012. In April 2013, India hosted the fourth Clean Energy Ministerial (CEM4) in New Delhi. Key insights from CEM4 are summarized in the report. It captures the ideas and recommendations of the government and private sector leaders who participated in the discussions on six discussion topics: reducing soft costs of solar PV; energy management systems; renewables policy and finance; clean vehicle adoption; mini-grid development; and power systems in emerging economies.

  4. GI Power Corporation Limited GIPCL | Open Energy Information

    Open Energy Info (EERE)

    New Delhi, Delhi (NCT), India Zip: 110020 Sector: Wind energy Product: Delhi-based start-up wind project developer. References: GI Power Corporation Limited (GIPCL)1 This...

  5. Growdiesel | Open Energy Information

    Open Energy Info (EERE)

    Name: Growdiesel Place: Delhi, Delhi (NCT), India Zip: 110092 Product: Delhi-based start-up biodiesel producer focusing on algae. References: Growdiesel1 This article is a...

  6. Cargo Power and Infrastructure Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd Place: New Delhi, Delhi (NCT), India Zip: 110002 Sector: Solar Product: Delhi-based car dealers. The firm is developing solar projects. References: Cargo Power and...

  7. Dharamshala Hydro Power Ltd | Open Energy Information

    Open Energy Info (EERE)

    Dharamshala Hydro Power Ltd Jump to: navigation, search Name: Dharamshala Hydro Power Ltd Place: New Delhi, Delhi (NCT), India Zip: 110008 Sector: Hydro Product: Delhi-based...

  8. Adi Biotech Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Delhi, Delhi (NCT), India Zip: 110016 Product: New Delhi-based consultancy focused on biofuel and jatropha cultivation. References: Adi Biotech Pvt. Ltd.1 This article is a...

  9. Tarini Infrastructure Ltd | Open Energy Information

    Open Energy Info (EERE)

    Place: New Delhi, Delhi (NCT), India Zip: 110024 Sector: Hydro Product: New Delhi-based small hydro project developer. References: Tarini Infrastructure Ltd.1 This article is a...

  10. Surya Jyoti Devices India Private Ltd | Open Energy Information

    Open Energy Info (EERE)

    Delhi, Delhi (NCT), India Zip: 110024 Sector: Solar Product: Manufactures solar thermal water heating systems at a factory in Punjab. References: Surya Jyoti Devices India...

  11. Central Bank of India | Open Energy Information

    Open Energy Info (EERE)

    India Jump to: navigation, search Name: Central Bank of India Place: DELHI, Delhi (NCT), India Zip: 110002 Product: Retail bank closely conencted with social development through...

  12. General Electric in India GE | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Name: General Electric in India (GE) Place: New Delhi, Delhi (NCT), India Zip: 110015 Sector: Services, Wind energy Product: String representation...

  13. Cosmo Consulting India Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Cosmo Consulting India Pvt Ltd Jump to: navigation, search Name: Cosmo Consulting India Pvt. Ltd. Place: New Delhi, Delhi (NCT), India Zip: 110 017 Sector: Hydro Product:...

  14. Cosmos Ignite Innovations Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Innovations Pvt Ltd Jump to: navigation, search Name: Cosmos Ignite Innovations Pvt Ltd Place: Delhi (NCT), India Zip: 110017 Product: Company started by two Stanford and New Delhi...

  15. Alpex Exports Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Name: Alpex Exports Pvt. Ltd. Place: New Delhi, Delhi (NCT), India Sector: Solar, Wind energy Product: Alpex is an international trading company with a diversified product...

  16. Centre for Science and Environment | Open Energy Information

    Open Energy Info (EERE)

    Environment Jump to: navigation, search Name: Centre for Science and Environment Place: New Delhi, Delhi (NCT), India Zip: 110062 Product: A public interest research and advocacy...

  17. Mangalam Energy Development Company P Ltd MEDCPL | Open Energy...

    Open Energy Info (EERE)

    Energy Development Company P Ltd MEDCPL Jump to: navigation, search Name: Mangalam Energy Development Company (P) Ltd. (MEDCPL) Place: New Delhi, Delhi (NCT), India Zip: 110005...

  18. Indiabulls Power Ltd formerly Sophia Power Company | Open Energy...

    Open Energy Info (EERE)

    Indiabulls Power Ltd formerly Sophia Power Company Jump to: navigation, search Name: Indiabulls Power Ltd. (formerly Sophia Power Company) Place: New Delhi, Delhi (NCT), India Zip:...

  19. Moser Baer India Ltd | Open Energy Information

    Open Energy Info (EERE)

    New Delhi, Delhi (NCT), India Zip: 110020 Product: Manufacturer of removable data storage media (CDs, DVDs), now diversifying into crystalline silicon, amorphous silicon and...

  20. Indian Bureau of Energy Efficiency | Open Energy Information

    Open Energy Info (EERE)

    Place: New Delhi, Delhi (NCT), India Zip: 110066 Product: Focused on reducing the energy intensity in the Indian economy. References: Indian Bureau of Energy Efficiency1...

  1. Technicom Chemie India Ltd | Open Energy Information

    Open Energy Info (EERE)

    India Ltd Place: New Delhi, Delhi (NCT), India Zip: 110024 Sector: Solar Product: Packaging machinery firm foraying into solar energy equipment via a joint venture with Manz...

  2. Belij Hydro Power Ltd | Open Energy Information

    Open Energy Info (EERE)

    Belij Hydro Power Ltd Jump to: navigation, search Name: Belij Hydro Power Ltd Place: New Delhi, Delhi (NCT), India Zip: 110008 Product: Private investorproject developer which has...

  3. IFCI Venture Capital Funds Ltd | Open Energy Information

    Open Energy Info (EERE)

    IFCI Venture Capital Funds Ltd Jump to: navigation, search Name: IFCI Venture Capital Funds Ltd Place: New Delhi, Delhi (NCT), India Zip: 110019 Product: Manager of several funds...

  4. Consortium of Chemical International Ltd CCIL | Open Energy Informatio...

    Open Energy Info (EERE)

    of Chemical International Ltd CCIL Jump to: navigation, search Name: Consortium of Chemical International Ltd (CCIL) Place: New Delhi, Delhi (NCT), India Sector: Biomass Product:...

  5. REEEP South Asia Regional Secretariat | Open Energy Information

    Open Energy Info (EERE)

    South Asia Regional Secretariat Jump to: navigation, search Name: REEEP South Asia Regional Secretariat Place: New Delhi, Delhi (NCT), India Zip: 110 003 Product: Regional...

  6. Mountain Energy Corporation | Open Energy Information

    Open Energy Info (EERE)

    Delhi (NCT), India Sector: Hydro Product: Delhi-based investment vehicle set-up to invest specifically in Indian small hydro power generation assets. References: Mountain...

  7. Timarpur Okhla Waste Management Company Pvt Ltd | Open Energy...

    Open Energy Info (EERE)

    Timarpur Okhla Waste Management Company Pvt Ltd Jump to: navigation, search Name: Timarpur-Okhla Waste Management Company Pvt Ltd Place: New Delhi, Delhi (NCT), India Zip: 110003...

  8. Society of Indian Electric Vehicle Manufacturers | Open Energy...

    Open Energy Info (EERE)

    Indian Electric Vehicle Manufacturers Jump to: navigation, search Name: Society of Indian Electric Vehicle Manufacturers Place: New Delhi, Delhi (NCT), India Sector: Vehicles...

  9. Shiv Shakti Electronics Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Shiv Shakti Electronics Pvt Ltd Jump to: navigation, search Name: Shiv Shakti Electronics Pvt Ltd Place: New Delhi, Delhi (NCT), India Zip: 110020 Product: Manufacturer of PV...

  10. Energy Efficiency Services Ltd | Open Energy Information

    Open Energy Info (EERE)

    Services Ltd Jump to: navigation, search Name: Energy Efficiency Services Ltd Place: Delhi (NCT), India Sector: Efficiency, Services Product: Delhi-based joint venture formed to...

  11. Indian Renewable Energy Development Agency Limited IREDA | Open...

    Open Energy Info (EERE)

    Development Agency Limited IREDA Jump to: navigation, search Name: Indian Renewable Energy Development Agency Limited (IREDA) Place: New Delhi, Delhi (NCT), India Zip: 110003...

  12. Regent Energy Ltd REL | Open Energy Information

    Open Energy Info (EERE)

    Ltd. (REL) Place: Delhi (NCT), India Zip: 110044 Sector: Hydro Product: Delhi-based small hydro project developer. References: Regent Energy Ltd. (REL)1 This article is a...

  13. Azure Power India Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Power India Pvt Ltd Jump to: navigation, search Name: Azure Power India Pvt. Ltd. Place: New Delhi, Delhi (NCT), India Zip: 110048 Sector: Solar Product: New Delhi-based...

  14. GTZ CDM India | Open Energy Information

    Open Energy Info (EERE)

    CDM India Jump to: navigation, search Name: GTZ CDM-India Place: New Delhi, Delhi (NCT), India Zip: 110049 Product: Delhi-based firm that actively cooperates with the National CDM...

  15. SBA Hydro Systems Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    SBA Hydro Systems Pvt Ltd Jump to: navigation, search Name: SBA Hydro Systems Pvt. Ltd. Place: New Delhi, Delhi (NCT), India Zip: 110019 Sector: Hydro Product: Delhi-based...

  16. Nova Bio Fuels Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Pvt Ltd Jump to: navigation, search Name: Nova Bio Fuels Pvt. Ltd. Place: New Delhi, Delhi (NCT), India Zip: 110048 Product: New Delhi-based biofuel project developer. References:...

  17. Sasi Power Ltd | Open Energy Information

    Open Energy Info (EERE)

    Place: New Delhi, Delhi (NCT), India Zip: 110020 Sector: Hydro Product: Delhi-based small hydro project developer. References: Sasi Power Ltd1 This article is a stub. You can...

  18. Patikari Power Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Place: New Delhi, Delhi (NCT), India Zip: 110003 Sector: Hydro Product: Delhi-based small hydro project developer. References: Patikari Power Pvt. Ltd.1 This article is a stub....

  19. Gehra Hydro Power Ltd | Open Energy Information

    Open Energy Info (EERE)

    Gehra Hydro Power Ltd Jump to: navigation, search Name: Gehra Hydro Power Ltd. Place: New Delhi, Delhi (NCT), India Zip: 110008 Sector: Hydro Product: Delhi-based small hydro...

  20. Cosmos Hydro Power Ltd CHPL | Open Energy Information

    Open Energy Info (EERE)

    Ltd CHPL Jump to: navigation, search Name: Cosmos Hydro Power Ltd. (CHPL) Place: New Delhi, Delhi (NCT), India Zip: 110060 Sector: Hydro Product: Delhi-based small hydro project...

  1. Birahi Ganga Hydro Power Ltd | Open Energy Information

    Open Energy Info (EERE)

    Birahi Ganga Hydro Power Ltd Jump to: navigation, search Name: Birahi Ganga Hydro Power Ltd. Place: New Delhi, Delhi (NCT), India Zip: 110019 Sector: Hydro Product: Delhi-based...

  2. Lanco Green Power Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    New Delhi, Delhi (NCT), India Zip: 110 001 Sector: Hydro Product: Delhi-based small hydro project developer. References: Lanco Green Power Pvt. Ltd.1 This article is a...

  3. Indian Wind Energy Association InWEA | Open Energy Information

    Open Energy Info (EERE)

    InWEA Jump to: navigation, search Name: Indian Wind Energy Association (InWEA) Place: New Delhi, Delhi (NCT), India Zip: 110016 Sector: Wind energy Product: Delhi-based wind...

  4. Moser Baer PhotoVoltaic Ltd | Open Energy Information

    Open Energy Info (EERE)

    PhotoVoltaic Ltd Jump to: navigation, search Name: Moser Baer PhotoVoltaic Ltd Place: New Delhi, Delhi (NCT), India Zip: 110020 Product: New Delhi-based PV cell manufacturer....

  5. Super Hydro Electric Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Electric Pvt Ltd Jump to: navigation, search Name: Super Hydro Electric Pvt. Ltd. Place: New Delhi, Delhi (NCT), India Zip: 1100024 Sector: Hydro Product: Delhi-based small hydro...

  6. Cobol Technologies | Open Energy Information

    Open Energy Info (EERE)

    Name: Cobol Technologies Place: New Delhi, Delhi (NCT), India Product: New Delhi-based thermal power and electricity distributer. The company is setting up a 5MW PV plant in...

  7. Vamshi Industries Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd. Place: New Delhi, Delhi (NCT), India Zip: 110 001 Sector: Hydro Product: Delhi-based small hydro project developer. The firm is a subsidiary of Lanco Infratech Ltd....

  8. Ginni Global Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd. Place: New Delhi, Delhi (NCT), India Zip: 110005 Sector: Hydro Product: Delhi-based small hydro project developer. References: Ginni Global Ltd.1 This article is a stub....

  9. PV Technologies India Ltd Moser Baer Solar Plc | Open Energy...

    Open Energy Info (EERE)

    India Ltd Moser Baer Solar Plc Jump to: navigation, search Name: PV Technologies India Ltd (Moser Baer Solar Plc) Place: New Delhi, Delhi (NCT), India Zip: 110020 Product: One of...

  10. Tinna Group | Open Energy Information

    Open Energy Info (EERE)

    New Delhi, Delhi (NCT), India Zip: 110030 Product: The India-based Tinna Group is a biodiesel producer, an oil seed processor, but also a transport company which has formed two...

  11. Usaka Hydro Powers Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Usaka Hydro Powers Pvt Ltd Jump to: navigation, search Name: Usaka Hydro Powers Pvt. Ltd. Place: Anand Parvat, Delhi (NCT), India Zip: 110005 Sector: Hydro Product: Delhi-based...

  12. D light design | Open Energy Information

    Open Energy Info (EERE)

    light design Jump to: navigation, search Name: d.light design Place: New Delhi, Delhi (NCT), India Zip: 1110049 Product: d.light is a US-founded, India-based designer and...

  13. RS India Wind Energy Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    RS India Wind Energy Pvt Ltd Jump to: navigation, search Name: RS India Wind Energy Pvt Ltd Place: New Delhi, Delhi (NCT), India Zip: 110001 Sector: Renewable Energy, Solar, Wind...

  14. Siri Ram Syal Hydro Power Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Siri Ram Syal Hydro Power Pvt Ltd Jump to: navigation, search Name: Siri Ram Syal Hydro Power Pvt Ltd Place: New Delhi, Delhi (NCT), India Zip: 110070 Sector: Hydro Product:...

  15. Applied Solar Technologies Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd. Place: Delhi (NCT), India Sector: Solar Product: Delhi-based firm that provides off-grid solar power to telecom towers. It builds and operates solar installations and takes...

  16. Hi Tech Agro Projects Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Tech Agro Projects Pvt Ltd Jump to: navigation, search Name: Hi-Tech Agro Projects Pvt Ltd Place: New Delhi, Delhi (NCT), India Zip: 110021 Sector: Biomass Product: Ms Hi-Tech...

  17. Manz Automation India Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    India Pvt Ltd Jump to: navigation, search Name: Manz Automation India Pvt Ltd Place: New Delhi, Delhi (NCT), India Product: JV set up to sell cell and module manufacturing and test...

  18. Potential MCNP enhancements for NCT

    SciTech Connect (OSTI)

    Estes, G.P.; Taylor, W.M.

    1992-12-01

    MCNP a Monte Carlo radiation transport code, is currently widely used in the medical community for a variety of purposes including treatment planning, diagnostics, beam design, tomographic studies, and radiation protection. This is particularly true in the Neutron Capture Therapy (NCT) community. The current widespread medical use of MCNP after its general public distribution in about 1980 attests to the code`s general versatility and usefulness, particularly since its development to date has not been influenced by medical applications. This paper discusses enhancements to MCNP that could be implemented at Los Alamos for the benefit of the NCT community. These enhancements generally fall into two categories, namely those that have already been developed to some extent but are not yet publicly available, and those that seem both needed based on our current understanding of NCT goals, and achievable based on our working knowledge of the MCNP code. MCNP is a general, coupled neutron/photon/electron Monte Carlo code developed and maintained by the Radiation Transport Group at Los Alamos. It has been used extensively for radiation shielding studies, reactor analysis, detector design, physics experiment interpretation, oil and gas well logging, radiation protection studies, accelerator design, etc. over the years. MCNP is a three-dimensional geometry, continuous energy physics code capable of modeling complex geometries, specifying material regions such as organs by the intersections of analytical surfaces.

  19. Potential MCNP enhancements for NCT

    SciTech Connect (OSTI)

    Estes, G.P.; Taylor, W.M.

    1992-01-01

    MCNP a Monte Carlo radiation transport code, is currently widely used in the medical community for a variety of purposes including treatment planning, diagnostics, beam design, tomographic studies, and radiation protection. This is particularly true in the Neutron Capture Therapy (NCT) community. The current widespread medical use of MCNP after its general public distribution in about 1980 attests to the code's general versatility and usefulness, particularly since its development to date has not been influenced by medical applications. This paper discusses enhancements to MCNP that could be implemented at Los Alamos for the benefit of the NCT community. These enhancements generally fall into two categories, namely those that have already been developed to some extent but are not yet publicly available, and those that seem both needed based on our current understanding of NCT goals, and achievable based on our working knowledge of the MCNP code. MCNP is a general, coupled neutron/photon/electron Monte Carlo code developed and maintained by the Radiation Transport Group at Los Alamos. It has been used extensively for radiation shielding studies, reactor analysis, detector design, physics experiment interpretation, oil and gas well logging, radiation protection studies, accelerator design, etc. over the years. MCNP is a three-dimensional geometry, continuous energy physics code capable of modeling complex geometries, specifying material regions such as organs by the intersections of analytical surfaces.

  20. V K Solar | Open Energy Information

    Open Energy Info (EERE)

    Delhi (NCT), India Zip: 110 048 Sector: Solar Product: Manufactures PV modules, inverters and systems, plus solar thermal water heaters. References: V-K Solar1 This article...

  1. Green Shakti | Open Energy Information

    Open Energy Info (EERE)

    Shakti Jump to: navigation, search Name: Green Shakti Place: Noida, Delhi (NCT), India Product: A company focused on developing power projects based on ecologically sound and...

  2. The Energy and Resources Institute TERI | Open Energy Information

    Open Energy Info (EERE)

    Delhi (NCT), India Zip: 110 003 Product: Research organization, focusing on energy, environment, and sustainable development. Managing CDM in India. References: The Energy...

  3. Himalayan Crest Power Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Pvt. Ltd. Place: Delhi (NCT), India Zip: 110020 Sector: Hydro Product: Okhla-based small hydro project developer. References: Himalayan Crest Power Pvt. Ltd.1 This article is a...

  4. Jindal Power Ltd | Open Energy Information

    Open Energy Info (EERE)

    (NCT), India Zip: 110066 Sector: Hydro Product: Delhi-based developer of thermal and hydro power projects References: Jindal Power Ltd1 This article is a stub. You can help...

  5. Indosolar Ltd | Open Energy Information

    Open Energy Info (EERE)

    (NCT), India Zip: 110065 Product: New Delhi-based manufacturer of multi-crystalline cells. References: Indosolar Ltd1 This article is a stub. You can help OpenEI by expanding...

  6. Enviro Energy Enterprises | Open Energy Information

    Open Energy Info (EERE)

    Enviro Energy Enterprises Address: 287, Satya Niketan, New Delhi, India Place: New Delhi, India Zip: 110021 Sector: Bioenergy Product: Leading supplier of Biomass Briquetted Fuel,...

  7. Redwood County, Minnesota: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Minnesota Highwater Ethanol Places in Redwood County, Minnesota Belview, Minnesota Clements, Minnesota Delhi, Minnesota Lamberton, Minnesota Lucan, Minnesota Milroy, Minnesota...

  8. National Clean Development Mechanism Office India | Open Energy...

    Open Energy Info (EERE)

    Development Mechanism Office India Jump to: navigation, search Name: National Clean Development Mechanism Office (India) Place: New Delhi, India Product: The Designated National...

  9. Medors Biotech Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    110007 Sector: Biofuels Product: Delhi based biofuels company with biodiesel and bioethanol production assets. References: Medors Biotech Pvt. Ltd.1 This article is a stub....

  10. Scale-up of Algal Biofuel Production Using Waste Nutrients

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    * SNL (16%) * MicroBio Engineering, Inc. (cost share) * Delhi County Water District (site host) Partners ... Middle pond is fed from deep a Facultative pond with more ...

  11. Maharishi Solar Technology Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Maharishi Solar Technology Pvt Ltd Jump to: navigation, search Name: Maharishi Solar Technology Pvt Ltd Place: New Delhi, Andhra Pradesh, India Zip: 110044 Sector: Solar Product:...

  12. Turboatom TPS Projects Ltd | Open Energy Information

    Open Energy Info (EERE)

    Turboatom TPS Projects Ltd Jump to: navigation, search Name: Turboatom TPS Projects Ltd Place: New Delhi, India Zip: 110048 Sector: Biomass Product: Engineering company; setting up...

  13. Indian Climate Policy: Choices and Challenges | Open Energy Informatio...

    Open Energy Info (EERE)

    Challenges illustrates the complex constraints on Indian policymakers and provides material for more fruitful, better-informed discussions in Washington, Delhi, and all points...

  14. Indian National CDM Authority | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Indian National CDM Authority Place: New Delhi, India Zip: 110 003 Product: Designated National Authority for India - approves CDM projects...

  15. User:Enviroenergy2005 | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Biomass-briquettes-1.jpg Name Enviro Energy Enterprises Location New Delhi, India Edits 4 Retrieved from "http:en.openei.orgw...

  16. Shell India Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Services, Solar Product: Delhi-based subsidiary of Royal Dutch Shell having interests in natural gas (LNG), liquefied petroleum gas (LPG), lubricants and bitumen. The firm also...

  17. India National Hydrogen Energy Board NHEB | Open Energy Information

    Open Energy Info (EERE)

    Hydrogen Energy Board NHEB Jump to: navigation, search Name: India National Hydrogen Energy Board (NHEB) Place: New Delhi, India Zip: 110 003 Sector: Hydro, Hydrogen Product: Set...

  18. Fission Product Separation/Extraction Techniques (Book) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    DOE Contract Number: DE-AC05-00OR22725 Resource Type: Book Publisher: Woodhead Publishing Limited, Oxford, Cambridge, Philadelphia, New Delhi, United Kingdom Research Org: Oak ...

  19. The Energy and Resources Institute (TERI) | Open Energy Information

    Open Energy Info (EERE)

    Institute (TERI) Address: Darbari Seth Block, IHC Complex, Lodhi Road Place: New Delhi, India Coordinates: 28.635308, 77.22496 Show Map Loading map... "minzoom":false,"mapping...

  20. Fermilab Today

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the MINOS building. Don't let yourself be too attracted by them, though: Coralberry is an invasive species. Photo: Prabhjot Singh, University of Delhi In the News GBN students test...

  1. Under Secretary Albright in India Highlights U.S.-India Energy Cooperation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Albright in India Highlights U.S.-India Energy Cooperation Under Secretary Albright in India Highlights U.S.-India Energy Cooperation April 4, 2008 - 2:47pm Addthis Signs Historic Agreement to Promote Gas Hydrates as a Clean Alternative Energy Source NEW DELHI, INDIA - U.S. Under Secretary of Energy Clarence "Bud" Albright, Jr. today co-chaired the fourth meeting of the U.S.-India Energy Dialogue with Indian Foreign Minister Shivshankar Menon in New Delhi,

  2. U.S.-Japan Workshop on Magnetic Reconnection draws participants from seven

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    India Energy Cooperation U.S.-India Energy Cooperation President Barack Obama and Prime Minister Narendra Modi walk in the garden at Hyderabad House in New Delhi, India, Jan. 25, 2015. (Official White House Photo by Pete Souza) President Barack Obama and Prime Minister Narendra Modi walk in the garden at Hyderabad House in New Delhi, India, Jan. 25, 2015. (Official White House Photo by Pete Souza) U.S.-India Energy Cooperation The United States and India have a long and successful strategic

  3. U.S. and India Sign Historic Agreement on FutureGen Project | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sign Historic Agreement on FutureGen Project U.S. and India Sign Historic Agreement on FutureGen Project April 3, 2006 - 10:02am Addthis India to Participate in World's First Integrated CO2 Sequestration and Hydrogen Production Research Power Plant, FutureGen Initiative NEW DELHI, INDIA - The U.S. Department of Energy (DOE) announced the signing of an agreement with India that makes it the first country to join the U.S. on the government steering committee for the FutureGen

  4. U.S.-India Energy Dialogue 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -India Energy Dialogue 2014 U.S.-India Energy Dialogue 2014 March 11, 2014 - 9:27am Addthis NEWS MEDIA CONTACT 202-586-4940 The U.S.-India Energy Dialogue met in New Delhi on March 5-11. Planning Commission Deputy Chairman Montek Singh Ahluwalia hosted the government-to-government portion of the Dialogue meeting on March 11 with United States Department of Energy Secretary Dr. Ernest Moniz. The U.S. delegation included the Department of Energy, U.S. Trade and Development Agency (USTDA), the U.S.

  5. Under Secretary of Energy Albright in India to Highlight U.S.-India Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cooperation | Department of Energy Albright in India to Highlight U.S.-India Energy Cooperation Under Secretary of Energy Albright in India to Highlight U.S.-India Energy Cooperation March 31, 2008 - 11:49am Addthis WASHINGTON, DC - U.S. Under Secretary of Energy Clarence "Bud" Albright, Jr. will travel to New Delhi, India this week as part of the U.S.-India Energy Dialogue to highlight ongoing cooperation between the United States and India to ensure safe, reliable, clean,

  6. Cyclotron Road: Visolis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deepak Dugar, Co-founder, Visolis 2 MIT (MS, MBA, PhD, Chemical Engg.) IIT Delhi (B.Tech, M.Tech, Biochemcial Engg.) Master's thesis: Algal photo-bioreactor design PhD thesis: High octane biofuels (Prof. Greg Stephanopoulos) Gourav Enterprises 3 Visolis is a platform technology for cost competitive production of bio- products Fuel Additives &Structural Materials $100B+ Specialty Chemicals & Polymers $20B Isoprene $ 3B  Drop-in products: Methyl isopropyl ketone (MIPK), Methyl vinyl

  7. Photoinduced currents in pristine and ion irradiated kapton-H polyimide

    SciTech Connect (OSTI)

    Sharma, Anu Sridharbabu, Y. Quamara, J. K.

    2014-10-15

    The photoinduced currents in pristine and ion irradiated kapton-H polyimide have been investigated for different applied electric fields at 200°C. Particularly the effect of illumination intensity on the maximum current obtained as a result of photoinduced polarization has been studied. Samples were irradiated by using PELLETRON facility, IUAC, New Delhi. The photo-carrier charge generation depends directly on intensity of illumination. The samples irradiated at higher fluence show a decrease in the peak current with intensity of illumination. The secondary radiation induced crystallinity (SRIC) is responsible for the increase in maximum photoinduced currents generated with intensity of illumination.

  8. Secretary Bodman in India Highlights Clean Energy Investment and Innovation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as Key to Energy Security and Economic Growth | Department of Energy India Highlights Clean Energy Investment and Innovation as Key to Energy Security and Economic Growth Secretary Bodman in India Highlights Clean Energy Investment and Innovation as Key to Energy Security and Economic Growth March 20, 2007 - 11:37am Addthis Secretary Bodman and Prime Minister Singh To Meet To Discuss U.S - India Energy Cooperation NEW DELHI, INDIA - U.S. Secretary of Energy Samuel W. Bodman today delivered

  9. The effect of the dc bias voltage on the x-ray bremsstrahlung and beam intensities of medium and highly charged ions of argon

    SciTech Connect (OSTI)

    Rodrigues, G.; Lakshmy, P. S.; Kanjilal, D.; Roy, A.; Baskaran, R.

    2010-02-15

    X-ray bremsstrahlung measurements from the 18 GHz High Temperature Superconducting Electron Cyclotron Resonance Ion Source, Pantechnik-Delhi Ion Source were measured as a function of negative dc bias voltage, keeping all other source operating parameters fixed and the extraction voltage in the off condition. The optimization of medium and highly charged ions of argon with similar source operating parameters is described. It is observed that the high temperature component of the electron is altered significantly with the help of bias voltage, and the electron population has to be maximized for obtaining higher current.

  10. Note: Electronic damping of microphonics in superconducting resonators of a continuous wave linac

    SciTech Connect (OSTI)

    Joshi, Gopal; Sahu, Bhuban Kumar; Agarwal, Vivek; Kumar, Girish

    2014-02-15

    The paper presents an implementation technique to damp the microphonics in superconducting resonators utilizing the coupling between the electromagnetic and the mechanical modes of a resonator. In the technique used the resonant frequency variations are fed back to modulate the field amplitude through a suitable transfer function. Of the two transfer functions used in the experiments, one emulates a derivative action and is placed in a negative feedback configuration. The other transfer function is essentially a parallel combination of second order low pass filters and is used in a positive feedback configuration. Experiments with the Quarter Wave resonators of IUAC, New Delhi linac demonstrate that the damping of some of the modes increases significantly with the introduction of this feedback leading to a reduction in power required for field stabilization and quieter operation of the RF control system.

  11. Check for chirality in {sup 102}Rh

    SciTech Connect (OSTI)

    Tonev, D.; Goutev, N.; Yavahchova, M. S.; Petkov, P.; Angelis, G. de; Bhowmik, R. K.; Singh, R. P.; Muralithar, S.; Madhavan, N.; Kumar, R.; Raju, M. Kumar; Kaur, J.; Mahanto, G.; Singh, A.; Kaur, N.; Garg, R.; Sukla, A.; Marinov, Ts. K.; Brant, S.

    2012-10-20

    Excited states in {sup 102}Rh, populated by the fusion-evaporation reaction {sup 94}Zr({sup 11}B,3n){sup 102}Rh at a beam energy of 36 MeV, were studied using the INGA spectrometer at IUAC, New Delhi. The angular correlations and the electromagnetic character of some of the gamma-ray transitions observed were investigated in details. A new chiral candidate sister band was found in the level-scheme of {sup 102}Rh. Lifetimes of exited states in {sup 102}Rh were measured by means of the Doppler-shift attenuation technique. The experimental results do not support the presence of static chirality in {sup 102}Rh.

  12. Using Third-Party Inspectors in Building Energy Codes Enforcement in India

    SciTech Connect (OSTI)

    Yu, Sha; Evans, Meredydd; Kumar, Pradeep; Van Wie, Laura; Bhatt, Vatsal

    2013-01-31

    India is experiencing fast income growth and urbanization, and this leads to unprecedented increases in demand for building energy services and resulting energy consumption. In response to rapid growth in building energy use, the Government of India issued the Energy Conservation Building Code (ECBC) in 2007, which is consistent with and based on the 2001 Energy Conservation Act. ECBC implementation has been voluntary since its enactment and a few states have started to make progress towards mandatory implementation. Rajasthan is the first state in India to adopt ECBC as a mandatory code. The State adopted ECBC with minor additions on March 28, 2011 through a stakeholder process; it became mandatory in Rajasthan on September 28, 2011. Tamil Nadu, Gujarat, and Andhra Pradesh have started to draft an implementation roadmap and build capacity for its implementation. The Bureau of Energy Efficiency (BEE) plans to encourage more states to adopt ECBC in the near future, including Haryana, Uttar Pradesh, Karnataka, Maharashtra, West Bengal, and Delhi. Since its inception, India has applied the code on a voluntary basis, but the Government of India is developing a strategy to mandate compliance. Implementing ECBC requires coordination between the Ministry of Power and the Ministry of Urban Development at the national level as well as interdepartmental coordination at the state level. One challenge is that the Urban Local Bodies (ULBs), the enforcement entities of building by-laws, lack capacity to implement ECBC effectively. For example, ULBs in some states might find the building permitting procedures to be too complex; in other cases, lack of awareness and technical knowledge on ECBC slows down the amendment of local building by-laws as well as ECBC implementation. The intent of this white paper is to share with Indian decision-makers code enforcement approaches: through code officials, third-party inspectors, or a hybrid approach. Given the limited capacity and human resources available in the state and local governments, involving third-party inspectors could rapidly expand the capacity for plan reviews and broad implementation. However, the procedures of involving third-parties need to be carefully designed in order to guarantee a fair process. For example, there should be multiple checks and certification requirements for third-party inspectors, and the government should have the final approval when third-party inspectors are used in a project. This paper discusses different approaches of involving third-parties in ECBC enforcement; the Indian states may choose the approaches that work best in their given circumstances.

  13. Identifying Sources of Volatile Organic Compounds and Aldehydes in a High Performance Building

    SciTech Connect (OSTI)

    Ortiz, Anna C.; Russell, Marion; Lee, Wen-Yee; Apte, Michael; Maddalena, Randy

    2010-09-20

    The developers of the Paharpur Business Center (PBC) and Software Technology Incubator Park in New Delhi, India offer an environmentally sustainable building with a strong emphasis on energy conservation, waste minimization and superior indoor air quality (IAQ). To achieve the IAQ goal, the building utilizes a series of air cleaning technologies for treating the air entering the building. These technologies include an initial water wash followed by ultraviolet light treatment and biolfiltration using a greenhouse located on the roof and numerous plants distributed throughout the building. Even with the extensive treatment of makeup air and room air in the PBC, a recent study found that the concentrations of common volatile organic compounds and aldehydes appear to rise incrementally as the air passes through the building from the supply to the exhaust. This finding highlights the need to consider the minimization of chemical sources in buildings in combination with the use of advanced air cleaning technologies when seeking to achieve superior IAQ. The goal of this project was to identify potential source materials for indoor chemicals in the PBC. Samples of building materials, including wood paneling (polished and unpolished), drywall, and plastic from a hydroponic drum that was part of the air cleaning system, were collected from the building for testing. All materials were collected from the PBC building and shipped to the Lawrence Berkeley National Laboratory (LBNL) for testing. The materials were pre-conditioned for two different time periods before measuring material and chemical specific emission factors for a range of VOCs and Aldehydes. Of the six materials tested, we found that the highest emitter of formaldehyde was new plywood paneling. Although polish and paint contribute to some VOC emissions, the main influence of the polish was in altering the capacity of the surface to accumulate formaldehyde. Neither the new nor aged polish contributed significantly to formaldehyde emissions. The VOC emission stream (excluding formaldehyde) was composed of up to 18 different chemicals and the total VOC emissions ranged in magnitude from 7 mu g/m2/h (old wood with old polish) to>500 mu g/m2/h (painted drywall). The formaldehyde emissions from drywall and old wood with either new or old polish were ~;;15 mu g/m2/h while the new wood material emitted>100 mu g/m2/h. However, when the projected surface area of each material in the building was considered, the new wood, old wood and painted drywall material all contributed substantially to the indoor formaldehyde loading while the coatings contributed primarily to the VOCs.

  14. CLEAN HYDROGEN TECHNOLOGY FOR 3-WHEEL TRANSPORTATION IN INDIA

    SciTech Connect (OSTI)

    Krishna Sapru

    2005-11-15

    Hydrogen is a clean burning, non-polluting transportation fuel. It is also a renewable energy carrier that can be produced from non-fossil fuel resources such as solar, wind and biomass. Utilizing hydrogen as an alternative fuel for vehicles will diversify the resources of energy, and reduce dependence on oil in the transportation sector. Additionally, clean burning hydrogen fuel will also alleviate air pollution that is a very severe problem in many parts of world, especially major metropolitan areas in developing countries, such as India and China. In our efforts to foster international collaborations in the research, development, and demonstration of hydrogen technologies, through a USAID/DOE cost-shared project, Energy Conversion Devices, Inc.,(www.ovonic.com) a leading materials and alternative energy company, in collaboration with Bajaj Auto Limited, India's largest three-wheeler taxi manufacturer, has successfully developed and demonstrated prototype hydrogen ICE three-wheelers in the United States and India. ECD's proprietary Ovonic solid-state hydrogen storage technology is utilized on-board to provide a means of compact, low pressure, and safe hydrogen fuel. These prototype hydrogen three-wheelers have demonstrated comparable performance to the original CNG version of the vehicle, achieving a driving range of 130 km. The hydrogen storage system capable of storing 1 kg hydrogen can be refilled to 80% of its capacity in about 15 minutes at a pressure of 300 psi. The prototype vehicles developed under this project have been showcased and made available for test rides to the public at exhibits such as the 16th NHA annual meeting in April 2005, Washington, DC, and the SIAM (Society of Indian Automotive Manufacturers) annual conference in August 2005, New Delhi, India. Passengers have included members of the automotive industry, founders of both ECD and Bajaj, members of the World Bank, the Indian Union Minister for Finance, the President of the Asia Development Bank, members of USAID, USDOE and many other individuals, all of whom have had praise for the vehicle and the technology. The progress made through this phase I work and the importance of hydrogen three-wheelers has also resulted in extensive press coverage by the news media around the world.

  15. Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport – Demonstration of Approach and Results of Used Fuel Performance Characterization

    Broader source: Energy.gov [DOE]

    This report provides results of the initial demonstration of the modeling capability developed to perform preliminary deterministic evaluations of moderate-to-high burnup used nuclear fuel (UNF) mechanical performance under normal conditions of storage (NCS) and transport (NCT).

  16. Locoregional Recurrence of Breast Cancer in Patients Treated With Breast Conservation Surgery and Radiotherapy Following Neoadjuvant Chemotherapy

    SciTech Connect (OSTI)

    Min, Sun Young; Lee, Seung Ju; Shin, Kyung Hwan; Park, In Hae; Jung, So-Youn; Lee, Keun Seok; Ro, Jungsil; Lee, Seeyoun; Kim, Seok Won; Kim, Tae Hyun; Kang, Han-Sung; Cho, Kwan Ho

    2011-12-01

    Purpose: Breast conservation surgery (BCS) and radiotherapy (RT) following neoadjuvant chemotherapy (NCT) have been linked with high locoregional recurrence (LRR) rates and ipsilateral breast tumor recurrence (IBTR) rates. The purpose of this study was to analyze clinical outcomes in patients who exhibited LRR and IBTR after being treated by BCS and RT following NCT. Methods and Materials: In total, 251 breast cancer patients treated with BCS and RT following NCT between 2001 and 2006 were included. All patients had been shown to be clinically node-positive. Clinical stage at diagnosis (2003 AJCC) was II in 68% of patients and III in 32% of patients. Of those, 50%, 35%, and 15% of patients received anthracycline-based, taxane-based, and combined anthracycline-taxane NCT, respectively. All patients received RT. Results: During follow-up (median, 55 months), 26 (10%) patients had LRR, 19 of these patients had IBTR. Five-year actuarial rates of IBTR-free and LRR-free survival were 91% and 89%, respectively. In multivariate analyses, lack of hormone suppression therapy was found to increase both LRR and IBTR rates. Hazard ratios were 7.99 (p < 0.0001) and 4.22 (p = 0.004), respectively. Additionally, pathology stage N2 to N3 increased LRR rate (hazard ratio, 4.22; p = 0.004), and clinical AJCC stage III IBTR rate (hazard ratio, 9.05; p = 0.034). Achievement of pathological complete response and presence of multifocal tumors did not affect LRR or IBTR. Conclusions: In patients with locally advanced disease, who were clinically node-positive at presentation, BCS after NCT resulted in acceptably low rates of IBTR and LRR. Mastectomy should be considered as an option in patients who present with clinical stage III tumors or who are not treated with adjuvant hormone suppression therapy, because they exhibit high IBTR rates after NCT and BCS.

  17. INEEL Advanced Radiotherapy Research Program Annual Report 2001

    SciTech Connect (OSTI)

    Venhuizen, James Robert

    2002-04-01

    This report summarizes the major activities and accomplishments of the Idaho National Engineering and Environmental Laboratory (INEEL) Advanced Radiotherapy Research Program for calendar year 2001. Applications of supportive research and development, as well as technology deployment in the fields of chemistry, radiation physics and dosimetry, and neutron source design and demonstration are described. Contributions in the fields of physics and biophysics include development of advanced patient treatment planning software, feasibility studies of accelerator neutron source technology for Neutron Capture Therapy (NCT), and completion of major modifications to the research reactor at Washington State University to produce an epithermal-neutron beam for NCT research applications.

  18. INEEL Advanced Radiotherapy Research Program Annual Report 2001

    SciTech Connect (OSTI)

    Venhuizen, James R.

    2002-04-30

    This report summarizes the major activities and accomplishments of the Idaho National Engineering and Environmental Laboratory (INEEL) Advanced Radiotherapy Research Program for calendar year 2001. Applications of supportive research and development, as well as technology deployment in the fields of chemistry, radiation physics and dosimetry, and neutron source design and demonstration are described. Contributions in the fields of physics and biophysics include development of advanced patient treatment planning software, feasibility studies of accelerator neutron source technology for Neutron Capture Therapy (NCT), and completion of major modifications to the research reactor at Washington State University to produce an epithermal-neutron beam for NCT research applications.

  19. National Nuclear Security Administration honors Y-12 employees | Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atlantic Treaty Organization NCT Nuclear Counterterrorism NCTIR Nuclear Counterterrorism and Incident Response Program NDAA National Defense Authorization Act NELA Nuclear Explosive Like-Assembly NEST Nuclear Emergency Support Team NGSI Next Generation Safeguards Initiative NIS Nonproliferation and International Security Program NMF National Mission Force NNSA National Nuclear Security Administration NNSS Nevada National Security Site NPAC Nonproliferation Policy and Arms Control Program NPT

  20. Workshop on neutron capture therapy

    SciTech Connect (OSTI)

    Fairchild, R.G.; Bond, V.P.

    1986-01-01

    Potentially optimal conditions for Neutron Capture Therapy (NCT) may soon be in hand due to the anticipated development of band-pass filtered beams relatively free of fast neutron contaminations, and of broadly applicable biomolecules for boron transport such as porphyrins and monoclonal antibodies. Consequently, a number of groups in the US are now devoting their efforts to exploring NCT for clinical application. The purpose of this Workshop was to bring these groups together to exchange views on significant problems of mutual interest, and to assure a unified and effective approach to the solutions. Several areas of preclinical investigation were deemed to be necessary before it would be possible to initiate clinical studies. As neither the monomer nor the dimer of sulfhydryl boron hydride is unequivocally preferable at this time, studies on both compounds should be continued until one is proven superior.

  1. MODELING ASSUMPTIONS FOR THE ADVANCED TEST REACTOR FRESH FUEL SHIPPING CONTAINER

    SciTech Connect (OSTI)

    Rick J. Migliore

    2009-09-01

    The Advanced Test Reactor Fresh Fuel Shipping Container (ATR FFSC) is currently licensed per 10 CFR 71 to transport a fresh fuel element for either the Advanced Test Reactor, the University of Missouri Research Reactor (MURR), or the Massachusetts Institute of Technology Research Reactor (MITR-II). During the licensing process, the Nuclear Regulatory Commission (NRC) raised a number of issues relating to the criticality analysis, namely (1) lack of a tolerance study on the fuel and packaging, (2) moderation conditions during normal conditions of transport (NCT), (3) treatment of minor hydrogenous packaging materials, and (4) treatment of potential fuel damage under hypothetical accident conditions (HAC). These concerns were adequately addressed by modifying the criticality analysis. A tolerance study was added for both the packaging and fuel elements, full-moderation was included in the NCT models, minor hydrogenous packaging materials were included, and fuel element damage was considered for the MURR and MITR-II fuel types.

  2. Normal conditions of transport thermal analysis and testing of a Type B drum package

    SciTech Connect (OSTI)

    Jerrell, J.W.; Alstine, M.N. van; Gromada, R.J.

    1995-11-01

    Increasing the content limits of radioactive material packagings can save money and increase transportation safety by decreasing the total number of shipments required to transport large quantities of material. The contents of drum packages can be limited by unacceptable containment vessel pressures and temperatures due to the thermal properties of the insulation. The purpose of this work is to understand and predict the effects of insulation properties on containment system performance. The type B shipping container used in the study is a double containment fiberboard drum package. The package is primarily used to transport uranium and plutonium metals and oxides. A normal condition of transport (NCT) thermal test was performed to benchmark an NCT analysis of the package. A 21 W heater was placed in an instrumented package to simulate the maximum source decay heat. The package reached thermal equilibrium 120 hours after the heater was turned on. Testing took place indoors to minimize ambient temperature fluctuations. The thermal analysis of the package used fiberboard properties reported in the literature and resulted in temperature significantly greater than those measured during the test. Details of the NCT test will be described and transient temperatures at key thermocouple locations within the package will be presented. Analytical results using nominal fiberboard properties will be presented. Explanations of the results and the attempt to benchmark the analysis will be presented. The discovery that fiberboard has an anisotropic thermal conductivity and its effect on thermal performance will also be discussed.

  3. Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport- Demonstration of Approach and Results on Used Fuel Performance Characterization

    SciTech Connect (OSTI)

    Adkins, Harold; Geelhood, Ken; Koeppel, Brian; Coleman, Justin; Bignell, John; Flores, Gregg; Wang, Jy-An; Sanborn, Scott; Spears, Robert; Klymyshyn, Nick

    2013-09-30

    This document addresses Oak Ridge National Laboratory milestone M2FT-13OR0822015 Demonstration of Approach and Results on Used Nuclear Fuel Performance Characterization. This report provides results of the initial demonstration of the modeling capability developed to perform preliminary deterministic evaluations of moderate-to-high burnup used nuclear fuel (UNF) mechanical performance under normal conditions of storage (NCS) and normal conditions of transport (NCT) conditions. This report also provides results from the sensitivity studies that have been performed. Finally, discussion on the long-term goals and objectives of this initiative are provided.

  4. Neutron Imaging of Diesel Particulate Filters

    SciTech Connect (OSTI)

    Strzelec, Andrea; Bilheux, Hassina Z; FINNEY, Charles E A; Daw, C Stuart; Foster, Prof. Dave; Rutland, Prof. Christopher J.; Schillinger, Burkhard; Schulz, Michael

    2009-01-01

    This article presents nondestructive neutron computed tomography (nCT) measurements of Diesel Particulate Filters (DPFs) as a method to measure ash and soot loading in the filters. Uncatalyzed and unwashcoated 200cpsi cordierite DPFs exposed to 100% biodiesel (B100) exhaust and conventional ultra low sulfur 2007 certification diesel (ULSD) exhaust at one speed-load point (1500rpm, 2.6bar BMEP) are compared to a brand new (never exposed) filter. Precise structural information about the substrate as well as an attempt to quantify soot and ash loading in the channel of the DPF illustrates the potential strength of the neutron imaging technique.

  5. Outcomes of Positron Emission Tomography-Staged Clinical N3 Breast Cancer Treated With Neoadjuvant Chemotherapy, Surgery, and Radiotherapy

    SciTech Connect (OSTI)

    Park, Hae Jin; Shin, Kyung Hwan; Cho, Kwan Ho; Park, In Hae; Lee, Keun Seok; Ro, Jungsil; Jung, So-Youn; Lee, Seeyoun; Kim, Seok Won; Kang, Han-Sung; Chie, Eui Kyu; Ha, Sung Whan

    2011-12-01

    Purpose: To evaluate the treatment outcome and efficacy of regional lymph node irradiation after neoadjuvant chemotherapy (NCT) and surgery in positron emission tomography (PET)-positive clinical N3 (cN3) breast cancer patients. Methods and Materials: A total of 55 patients with ipsilateral infraclavicular (ICL), internal mammary (IMN), or supraclavicular (SCL) lymph node involvement in the absence of distant metastases, as revealed by an initial PET scan, were retrospectively analyzed. The clinical nodal stage at diagnosis (2002 AJCC) was cN3a in 14 patients (26%), cN3b in 12 patients (22%), and cN3c in 29 patients (53%). All patients were treated with NCT, followed by mastectomy or breast-conserving surgery and subsequent radiotherapy (RT) with curative intent. Results: At the median follow-up of 38 months (range, 9-80 months), 20 patients (36%) had developed treatment failures, including distant metastases either alone or combined with locoregional recurrences that included one ipsilateral breast recurrence (IBR), six regional failures (RF), and one case of combined IBR and RF. Only 3 patients (5.5%) exhibited treatment failure at the initial PET-positive clinical N3 lymph node. The 5-year locoregional relapse-free survival, disease-free survival (DFS), and overall survival rates were 80%, 60%, and 79%, respectively. RT delivered to PET-positive IMN regions in cN3b patients and at higher doses ({>=}55 Gy) to SCL regions in cN3c patients was not associated with improved 5-year IMN/SCL relapse-free survival or DFS. Conclusion: NCT followed by surgery and RT, including the regional lymph nodes, resulted in excellent locoregional control for patients with PET-positive cN3 breast cancer. The primary treatment failure in this group was due to distant metastasis rather than RF. Neither higher-dose RT directed at PET-positive SCL nodes nor coverage of PET-positive IMN nodes was associated with additional gains in locoregional control or DFS.

  6. Dosimetry in Thermal Neutron Irradiation Facility at BMRR

    SciTech Connect (OSTI)

    Hu, J. P.; Holden, N. E.; Reciniello, R. N.

    2014-05-23

    Radiation dosimetry for Neutron Capture Therapy (NCT) has been performed since 1959 at Thermal Neutron Irradiation Facility (TNIF) of the three-megawatt light-water cooled Brookhaven Medical Research Reactor (BMRR). In the early 1990s when more effective drug carriers were developed for NCT, in which the eye melanoma and brain tumors in rats were irradiated in situ, extensive clinical trials of small animals began using a focused thermal neutron beam. To improve the dosimetry at irradiation facility, a series of innovative designs and major modifications made to enhance the beam intensity and to ease the experimental sampling at BMRR were performed; including (1) in-core fuel addition to increase source strength and balance flux of neutrons towards two ports, (2) out of core moderator remodeling, done by replacing thicker D2O tanks at graphite-shutter interfacial areas, to expedite neutron thermalization, (3) beam shutter upgrade to reduce strayed neutrons and gamma dose, (4) beam collimator redesign to optimize the beam flux versus dose for animal treatment, (5) beam port shielding installation around the shutter opening area (lithium-6 enriched polyester-resin in boxes, attached with polyethylene plates) to reduce prompt gamma and fast neutron doses, (6) sample holder repositioning to optimize angle versus distance for a single organ or whole body irradiation, and (7) holder wall buildup with neutron reflector materials to increase dose and dose rate from scattered thermal neutrons. During the facility upgrade, reactor dosimetry was conducted using thermoluminescent dosimeters TLD for gamma dose estimate, using ion chambers to confirm fast neutron and gamma dose rate, and by the activation of gold-foils with and without cadmium-covers, for fast and thermal neutron flux determination. Based on the combined effect from the size and depth of tumor cells and the location and geometry of dosimeters, the measured flux from cadmium-difference method was 4 - 7 % lower than the statistical mean derived from the Monte-Carlo modeling (5% uncertainty). The dose rate measured by ion chambers was 6 - 10 % lower than the output tallies (7% uncertainty). The detailed dosimetry that was performed at the TNIF for the NCT will be described.

  7. TYPE A FISSILE PACKAGING FOR AIR TRANSPORT PROJECT OVERVIEW

    SciTech Connect (OSTI)

    Eberl, K.; Blanton, P.

    2013-10-11

    This paper presents the project status of the Model 9980, a new Type A fissile packaging for use in air transport. The Savannah River National Laboratory (SRNL) developed this new packaging to be a light weight (<150-lb), drum-style package and prepared a Safety Analysis for Packaging (SARP) for submission to the DOE/EM. The package design incorporates unique features and engineered materials specifically designed to minimize packaging weight and to be in compliance with 10CFR71 requirements. Prototypes were fabricated and tested to evaluate the design when subjected to Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC). An overview of the design details, results of the regulatory testing, and lessons learned from the prototype fabrication for the 9980 will be presented.

  8. LESSONS LEARNED FROM CIRFT TESTING ON SNF VIBRATION INTEGRITY STUDY

    SciTech Connect (OSTI)

    Wang, Jy-An John; Wang, Hong; Jiang, Hao; Bevard, Bruce Balkcom; Howard, Rob L; Scaglione, John M

    2015-01-01

    A cyclic integrated reversible-bending fatigue tester (CIRFT) was developed to support U.S. NRC and DOE Used Fuel Disposition Campaign studies on high burn-up (HBU) spent nuclear fuel (SNF) transportation during normal conditions of transport (NCT). Two devices were developed; the first CIRFT was successfully installed and operated in the ORNL hot-cells in September 2013. Since hot cell testing commenced several HBU SNF samples from both Zr-4 and M5 clads were investigated. The second CIRFT device was developed in February 2014, and has been used to test clad/fuel surrogate rods (stainless steel with alumina pellet inserts). The second CIRFT machine has also been used for sensor development and test sensitivity analyses, as well as loading boundary condition parameter studies. The lessons learned from CIRFT testing will be presented in this paper.

  9. Lessons learned from CIRFT testing on SNF vibration integrity study

    SciTech Connect (OSTI)

    Wang, Jy-An John; Wang, Hong; Jiang, Hao; Bevard, Bruce Balkcom; Howard, Rob L; Scaglione, John M

    2015-01-01

    A cyclic integrated reversible-bending fatigue tester (CIRFT) was developed to support U.S. NRC and DOE Used Fuel Disposition Campaign studies on high burn-up (HBU) spent nuclear fuel (SNF) transportation during normal conditions of transport (NCT). Two devices were developed; the first CIRFT was successfully installed and operated in the ORNL hot-cells in September 2013. Since hot cell testing commenced several HBU SNF samples from both Zr-4 and M5 clads were investigated. The second CIRFT device was developed in February 2014, and has been used to test clad/fuel surrogate rods (stainless steel with alumina pellet inserts). The second CIRFT machine has also been used for sensor development and test sensitivity analyses, as well as loading boundary condition parameter studies. The lessons learned from CIRFT testing will be presented in this paper.

  10. DEVELOPMENT OF THE BULK TRITIUM SHIPPING PACKAGING

    SciTech Connect (OSTI)

    Blanton, P.; Eberl, K.

    2008-09-14

    A new radioactive shipping packaging for transporting bulk quantities of tritium, the Bulk Tritium Shipping Package (BTSP), has been designed for the Department of Energy (DOE) as a replacement for a package designed in the early 1970s. This paper summarizes significant design features and describes how the design satisfies the regulatory safety requirements of the Code of Federal Regulations and the International Atomic Energy Agency. The BTSP design incorporates many improvements over its predecessor by implementing improved testing, handling, and maintenance capabilities, while improving manufacturability and incorporating new engineered materials. This paper also discusses the results from testing of the BTSP to 10 CFR 71 Normal Conditions of Transport and Hypothetical Accident Condition events. The programmatic need of the Department of Energy (DOE) to ship bulk quantities of tritium has been satisfied since the late 1970s by the UC-609 shipping package. The current Certificate of Conformance for the UC-609, USA/9932/B(U) (DOE), will expire in late 2011. Since the UC-609 was not designed to meet current regulatory requirements, it will not be recertified and thereby necessitates a replacement Type B shipping package for continued DOE tritium shipments in the future. A replacement tritium packaging called the Bulk Tritium Shipping Package (BTSP) is currently being designed and tested by Savannah River National Laboratory (SRNL). The BTSP consists of two primary assemblies, an outer Drum Assembly and an inner Containment Vessel Assembly (CV), both designed to mitigate damage and to protect the tritium contents from leaking during the regulatory Hypothetical Accident Condition (HAC) events and during Normal Conditions of Transport (NCT). During transport, the CV rests on a silicone pad within the Drum Liner and is covered with a thermal insulating disk within the insulated Drum Assembly. The BTSP packaging weighs approximately 500 lbs without contents and is 50-1/2 inches high by 24-1/2 inches in outside diameter. With contents the gross weight of the BTSP is 650 lbs. The BTSP is designed for the safe shipment of 150 grams of tritium in a solid or gaseous state. To comply with the federal regulations that govern Type B shipping packages, the BTSP is designed so that it will not lose tritium at a rate greater than the limits stated in 10CFR 71.51 of 10{sup -6} A2 per hour for the 'Normal Conditions of Transport' (NCT) and an A2 in 1 week under 'Hypothetical Accident Conditions' (HAC). Additionally, since the BTSP design incorporates a valve as part of the tritium containment boundary, secondary containment features are incorporated in the CV Lid to protect against gas leakage past the valve as required by 10CFR71.43(e). This secondary containment boundary is designed to provide the same level of containment as the primary containment boundary when subjected to the HAC and NCT criteria.

  11. Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Modeling, Simulation and Experimental Integration RD&D Plan

    SciTech Connect (OSTI)

    Adkins, Harold E.

    2013-04-01

    Under current U.S. Nuclear Regulatory Commission regulation, it is not sufficient for used nuclear fuel (UNF) to simply maintain its integrity during the storage period, it must maintain its integrity in such a way that it can withstand the physical forces of handling and transportation associated with restaging the fuel and moving it to treatment or recycling facilities, or a geologic repository. Hence it is necessary to understand the performance characteristics of aged UNF cladding and ancillary components under loadings stemming from transport initiatives. Researchers would like to demonstrate that enough information, including experimental support and modeling and simulation capabilities, exists to establish a preliminary determination of UNF structural performance under normal conditions of transport (NCT). This research, development and demonstration (RD&D) plan describes a methodology, including development and use of analytical models, to evaluate loading and associated mechanical responses of UNF rods and key structural components. This methodology will be used to provide a preliminary assessment of the performance characteristics of UNF cladding and ancillary components under rail-related NCT loading. The methodology couples modeling and simulation and experimental efforts currently under way within the Used Fuel Disposition Campaign (UFDC). The methodology will involve limited uncertainty quantification in the form of sensitivity evaluations focused around available fuel and ancillary fuel structure properties exclusively. The work includes collecting information via literature review, soliciting input/guidance from subject matter experts, performing computational analyses, planning experimental measurement and possible execution (depending on timing), and preparing a variety of supporting documents that will feed into and provide the basis for future initiatives. The methodology demonstration will focus on structural performance evaluation of Westinghouse WE 17×17 pressurized water reactor fuel assemblies with a discharge burnup range of 30-58 GWd/MTU (assembly average), loaded in a representative high-capacity (≥32 fuel rod assemblies) transportation package. Evaluations will be performed for representative normal conditions of rail transport involving a rail conveyance capable of meeting the Association of American Railroads (AAR) S-2043 specification. UNF modeling is anticipated to be defined to the pellet-cladding level and take in to account influences associated with spacer grids, intermediate fluid mixers, and control components. The influence of common degradation issues such as ductile-to-brittle-transition will also be accounted for. All model development and analysis will be performed with commercially available software packages exclusively. Inputs and analyses will be completely documented, all supporting information will be traceable, and bases will be defendable so as to be most useful to the U.S. Department of Energy community and mission. The expected completion date is the end of fiscal year (FY) 2013.

  12. USED FUEL RAIL SHOCK AND VIBRATION TESTING OPTIONS ANALYSIS

    SciTech Connect (OSTI)

    Ross, Steven B.; Best, Ralph E.; Klymyshyn, Nicholas A.; Jensen, Philip J.; Maheras, Steven J.

    2014-09-29

    The objective of the rail shock and vibration tests is to complete the framework needed to quantify loads of fuel assembly components that are necessary to guide materials research and establish a technical basis for review organizations such as the U.S. Nuclear Regulatory Commission (NRC). A significant body of experimental and numerical modeling data exists to quantify loads and failure limits applicable to normal conditions of transport (NCT) rail transport, but the data are based on assumptions that can only be verified through experimental testing. The test options presented in this report represent possible paths for acquiring the data that are needed to confirm the assumptions of previous work, validate modeling methods that will be needed for evaluating transported fuel on a case-by-case basis, and inform material test campaigns on the anticipated range of fuel loading. The ultimate goal of this testing is to close all of the existing knowledge gaps related to the loading of used fuel under NCT conditions and inform the experiments and analysis program on specific endpoints for their research. The options include tests that would use an actual railcar, surrogate assemblies, and real or simulated rail transportation casks. The railcar carrying the cradle, cask, and surrogate fuel assembly payload would be moved in a train operating over rail track modified or selected to impart shock and vibration forces that occur during normal rail transportation. Computer modeling would be used to help design surrogates that may be needed for a rail cask, a cask’s internal basket, and a transport cradle. The objective of the design of surrogate components would be to provide a test platform that effectively simulates responses to rail shock and vibration loads that would be exhibited by state-of-the-art rail cask, basket, and/or cradle structures. The computer models would also be used to help determine the placement of instrumentation (accelerometers and strain gauges) on the surrogate fuel assemblies, cask and cradle structures, and the railcar so that forces and deflections that would result in the greatest potential for damage to high burnup and long-cooled UNF can be determined. For purposes of this report we consider testing on controlled track when we have control of the track and speed to facilitate modeling.

  13. FUEL CASK IMPACT LIMITER VULNERABILITIES

    SciTech Connect (OSTI)

    Leduc, D; Jeffery England, J; Roy Rothermel, R

    2009-02-09

    Cylindrical fuel casks often have impact limiters surrounding just the ends of the cask shaft in a typical 'dumbbell' arrangement. The primary purpose of these impact limiters is to absorb energy to reduce loads on the cask structure during impacts associated with a severe accident. Impact limiters are also credited in many packages with protecting closure seals and maintaining lower peak temperatures during fire events. For this credit to be taken in safety analyses, the impact limiter attachment system must be shown to retain the impact limiter following Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC) impacts. Large casks are often certified by analysis only because of the costs associated with testing. Therefore, some cask impact limiter attachment systems have not been tested in real impacts. A recent structural analysis of the T-3 Spent Fuel Containment Cask found problems with the design of the impact limiter attachment system. Assumptions in the original Safety Analysis for Packaging (SARP) concerning the loading in the attachment bolts were found to be inaccurate in certain drop orientations. This paper documents the lessons learned and their applicability to impact limiter attachment system designs.

  14. FY 2014 Status Report: of Vibration Testing of Clad Fuel (M4FT-14OR0805033)

    SciTech Connect (OSTI)

    Bevard, Bruce Balkcom

    2014-03-28

    The DOE Used Fuel Disposition Campaign (UFDC) tasked Oak Ridge National Laboratory (ORNL) to investigate the behavior of light-water-reactor (LWR) fuel cladding material performance related to extended storage and transportation of UNF. ORNL has been tasked to perform a systematic study on UNF integrity under simulated normal conditions of transportation (NCT) by using the recently developed hot-cell testing equipment, Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT). To support the testing on actual high-burnup UNF, fast-neutron irradiation of pre-hydrided zirconium-alloy cladding in the High Flux Isotope Reactor (HFIR) at elevated temperatures will be used to simulate the effects of high-burnup on fuel cladding for help in understanding the cladding materials properties relevant to extended storage and subsequent transportation. The irradiated pre-hydrided metallic materials testing will generate baseline data to benchmark hot-cell testing of the actual high-burnup UNF cladding. More importantly, the HFIR-irradiated samples will be free of alpha contamination and can be provided to researchers who do not have hot cell facilities to handle highly contaminated high-burnup UNF cladding to support their research projects for the UFDC.

  15. A COMPARISON OF TWO THERMAL INSULATION AND STRUCTURAL MATERIALS FOR USE IN TYPE B PACKAGINGS

    SciTech Connect (OSTI)

    Blanton, P.; Eberl, K.

    2010-07-16

    This paper presents the summary of design features and test results of two Type B Shipping Package prototype configurations comprising different insulating materials developed by the Savannah River National Laboratory (SRNL) for the Department of Energy. The materials evaluated, a closed-cell polyurethane foam and a vacuformed ceramic fiber material, were selected to provide adequate structural protection to the package containment vessel during Normal Conditions of Transport (NCT) and Hypothetical Accident Condition (HAC) events and to provide thermal protection during the HAC fire. Polyurethane foam has been used in shipping package designs for many years because of the stiffness it provides to the structure and because of the thermal protection it provides during fire scenarios. This comparison describes how ceramic fiber material offers an alternative to the polyurethane foam in a specific overpack design. Because of the high operating temperature ({approx}2,300 F) of the ceramic material, it allows for contents with higher heat loads to be shipped than is possible with polyurethane foam. Methods of manufacturing and design considerations using the two materials will be addressed.

  16. Final Report for the “WSU Neutron Capture Therapy Facility Support”

    SciTech Connect (OSTI)

    Gerald E. Tripard; Keith G. Fox

    2006-08-24

    The objective for the cooperative research program for which this report has been written was to provide separate NCT facility user support for the students, faculty and scientists who would be doing the U.S. Department of Energy Office (DOE) of Science supported advanced radiotargeted research at the WSU 1 megawatt TRIGA reactor. The participants were the Idaho National laboratory (INL, P.I., Dave Nigg), the Veterinary Medical Research Center of Washington State University (WSU, Janean Fidel and Patrick Gavin), and the Washington State University Nuclear Radiation Center (WSU, P.I., Gerald Tripard). A significant number of DOE supported modifications were made to the WSU reactor in order to create an epithermal neutron beam while at the same time maintaining the other activities of the 1 MW reactor. These modifications were: (1) Removal of the old thermal column. (2) Construction and insertion of a new epithermal filter, collimator and shield. (3) Construction of a shielded room that could accommodate the very high radiation field created by an intense neutron beam. (4) Removal of the previous reactor core fuel cluster arrangement. (5) Design and loading of the new reactor core fuel cluster arrangement in order to optimize the neutron flux entering the epithermal neutron filter. (6) The integration of the shielded rooms interlocks and radiological controls into the SCRAM chain and operating electronics of the reactor. (7) Construction of a motorized mechanism for moving and remotely controlling the position of the entire reactor bridge. (8) The integration of the reactor bridge control electronics into the SCRAM chain and operating electronics of the reactor. (9) The design, construction and attachment to the support structure of the reactor of an irradiation box that could be inserted into position next to the face of the reactor. (Necessitated by the previously mentioned core rearrangement). All of the above modifications were successfully completed and tested. The resulting epithermal beam of 1 x 10{sup 9} n/sec-cm{sup 2} was measured by Idaho National Laboratory with assistance from WSU's Neutron Activation Analysis Group. The beam is as good as our initial proposals for the project had predicted. In addition to all of the design, construction and insertion of the hardware, shielding, electronics and radiation monitoring systems there was considerable manpower and effort put into changes in the Technical Specifications of the reactor and implementing procedures for use of the new facility. This staff involvement is one of the reasons we requested special facility support from the DOE. Once the facility was competed and all of the recalibrations and measurements made to characterize the differences between this reactor core and the previous core we began to assist INL in making their beam measurements with foils and phantoms. Although we proposed support for only one additional staff position to support this new NCT facility the staff support provided by the WSU Nuclear Radiation Center was greater than had been anticipated by our initial proposal. INL was also assisted in the testing of a heavy water (deuterated water) bladder that can be inserted into the collimator in order to produce an intense, external thermal neutron beam. The external epithermal and/or thermal neutron beam capability remains available for use, if funding becomes available for future research projects.

  17. Optimal Timing for Assessment of Tumor Response to Neoadjuvant Chemoradiation in Patients With Rectal Cancer: Do All Patients Benefit From Waiting Longer Than 6 Weeks?

    SciTech Connect (OSTI)

    Perez, Rodrigo O.; Angelita and Joaquim Gama Institute, Sao Paulo ; Habr-Gama, Angelita; Sao Juliao, Guilherme P.; Gama-Rodrigues, Joaquim; Sousa, Afonso H.S.; Campos, Fabio Guilherme; Imperiale, Antonio R.; Lynn, Patricio B.; Proscurshim, Igor; Nahas, Sergio Carlos; Ono, Carla Rachel; Buchpiguel, Carlos Alberto; Department of Radiology and Nuclear Medicine, Hospital do Coracao, Sao Paulo

    2012-12-01

    Purpose: To estimate the metabolic activity of rectal cancers at 6 and 12 weeks after completion of chemoradiation therapy (CRT) by 2-[fluorine-18] fluoro-2-deoxy-D-glucose-labeled positron emission tomography/computed tomography ([{sup 18}FDG]PET/CT) imaging and correlate with response to CRT. Methods and Materials: Patients with cT2-4N0-2M0 distal rectal adenocarcinoma treated with long-course neoadjuvant CRT (54 Gy, 5-fluouracil-based) were prospectively studied ( (ClinicalTrials.org) identifier (NCT00254683)). All patients underwent 3 PET/CT studies (at baseline and 6 and 12 weeks from CRT completion). Clinical assessment was at 12 weeks. Maximal standard uptake value (SUVmax) of the primary tumor was measured and recorded at each PET/CT study after 1 h (early) and 3 h (late) from {sup 18}FDG injection. Patients with an increase in early SUVmax between 6 and 12 weeks were considered 'bad' responders and the others as 'good' responders. Results: Ninety-one patients were included; 46 patients (51%) were 'bad' responders, whereas 45 (49%) patients were 'good' responders. 'Bad' responders were less likely to develop complete clinical response (6.5% vs. 37.8%, respectively; P=.001), less likely to develop significant histological tumor regression (complete or near-complete pathological response; 16% vs. 45%, respectively; P=.008) and exhibited greater final tumor dimension (4.3 cm vs. 3.3 cm; P=.03). Decrease between early (1 h) and late (3 h) SUVmax at 6-week PET/CT was a significant predictor of 'good' response (accuracy of 67%). Conclusions: Patients who developed an increase in SUVmax after 6 weeks were less likely to develop significant tumor downstaging. Early-late SUVmax variation at 6-week PET/CT may help identify these patients and allow tailored selection of CRT-surgery intervals for individual patients.

  18. HIV-1 transmission linkage in an HIV-1 prevention clinical trial

    SciTech Connect (OSTI)

    Leitner, Thomas; Campbell, Mary S; Mullins, James I; Hughes, James P; Wong, Kim G; Raugi, Dana N; Scrensen, Stefanie

    2009-01-01

    HIV-1 sequencing has been used extensively in epidemiologic and forensic studies to investigate patterns of HIV-1 transmission. However, the criteria for establishing genetic linkage between HIV-1 strains in HIV-1 prevention trials have not been formalized. The Partners in Prevention HSV/HIV Transmission Study (ClinicaITrials.gov NCT00194519) enrolled 3408 HIV-1 serodiscordant heterosexual African couples to determine the efficacy of genital herpes suppression with acyclovir in reducing HIV-1 transmission. The trial analysis required laboratory confirmation of HIV-1 linkage between enrolled partners in couples in which seroconversion occurred. Here we describe the process and results from HIV-1 sequencing studies used to perform transmission linkage determination in this clinical trial. Consensus Sanger sequencing of env (C2-V3-C3) and gag (p17-p24) genes was performed on plasma HIV-1 RNA from both partners within 3 months of seroconversion; env single molecule or pyrosequencing was also performed in some cases. For linkage, we required monophyletic clustering between HIV-1 sequences in the transmitting and seroconverting partners, and developed a Bayesian algorithm using genetic distances to evaluate the posterior probability of linkage of participants sequences. Adjudicators classified transmissions as linked, unlinked, or indeterminate. Among 151 seroconversion events, we found 108 (71.5%) linked, 40 (26.5%) unlinked, and 3 (2.0%) to have indeterminate transmissions. Nine (8.3%) were linked by consensus gag sequencing only and 8 (7.4%) required deep sequencing of env. In this first use of HIV-1 sequencing to establish endpoints in a large clinical trial, more than one-fourth of transmissions were unlinked to the enrolled partner, illustrating the relevance of these methods in the design of future HIV-1 prevention trials in serodiscordant couples. A hierarchy of sequencing techniques, analysis methods, and expert adjudication contributed to the linkage determination process.

  19. Quality assurance for the clinical implementation of kilovoltage intrafraction monitoring for prostate cancer VMAT

    SciTech Connect (OSTI)

    Ng, J. A.; Booth, J. T.; OBrien, R. T.; Huang, C.-Y.; Keall, P. J.; Colvill, E.; Poulsen, P. R.

    2014-11-01

    Purpose: Kilovoltage intrafraction monitoring (KIM) is a real-time 3D tumor monitoring system for cancer radiotherapy. KIM uses the commonly available gantry-mounted x-ray imager as input, making this method potentially more widely available than dedicated real-time 3D tumor monitoring systems. KIM is being piloted in a clinical trial for prostate cancer patients treated with VMAT (NCT01742403). The purpose of this work was to develop clinical process and quality assurance (QA) practices for the clinical implementation of KIM. Methods: Informed by and adapting existing guideline documents from other real-time monitoring systems, KIM-specific QA practices were developed. The following five KIM-specific QA tests were included: (1) static localization accuracy, (2) dynamic localization accuracy, (3) treatment interruption accuracy, (4) latency measurement, and (5) clinical conditions accuracy. Tests (1)(4) were performed using KIM to measure static and representative patient-derived prostate motion trajectories using a 3D programmable motion stage supporting an anthropomorphic phantom with implanted gold markers to represent the clinical treatment scenario. The threshold for system tolerable latency is <1 s. The tolerances for all other tests are that both the mean and standard deviation of the difference between the programmed trajectory and the measured data are <1 mm. The (5) clinical conditions accuracy test compared the KIM measured positions with those measured by kV/megavoltage (MV) triangulation from five treatment fractions acquired in a previous pilot study. Results: For the (1) static localization, (2) dynamic localization, and (3) treatment interruption accuracy tests, the mean and standard deviation of the difference are <1.0 mm. (4) The measured latency is 350 ms. (5) For the tests with previously acquired patient data, the mean and standard deviation of the difference between KIM and kV/MV triangulation are <1.0 mm. Conclusions: Clinical process and QA practices for the safe clinical implementation of KIM, a novel real-time monitoring system using commonly available equipment, have been developed and implemented for prostate cancer VMAT.

  20. DEVELOPMENT OF A NEW TYPE A(F)RADIOACTIVE MATERIAL PACKAGING FOR THE DEPARTMENT OF ENERGY

    SciTech Connect (OSTI)

    Blanton, P.; Eberl, K.

    2008-09-14

    In a coordinated effort, the Department of Transportation (DOT) and Nuclear Regulatory Commission (NRC) proposed the elimination of the Specification Packaging from 49 CFR 173.[1] In accordance with the Federal Register, issued on October 1, 2004, new fabrication of Specification Packages would no longer be authorized. In accordance with the NRC final rulemaking published January 26, 2004, Specification Packagings are mandated by law to be removed from service no later than October 1, 2008. This coordinated effort and resulting rulemaking initiated a planned phase out of Specification Type B and Type A fissile (F) material transportation packages within the Department of Energy (DOE) and its subcontractors. One of the Specification Packages affected by this regulatory change is the UN1A2 Specification Package, per DOT 49 CFR 173.417(a)(6). To maintain continuing shipments of DOE materials currently transported in UN1A2 Specification Package after the existing authorization expires, a replacement Type A(F) material packaging design is under development by the Savannah River National Laboratory. This paper presents a summary of the prototype design effort and testing of the new Type A(F) Package development for the DOE. This paper discusses the progress made in the development of a Type A Fissile Packaging to replace the expiring 49 CFR UN1A2 Specification Fissile Package. The Specification Package was mostly a single-use waste disposal container. The design requirements and authorized radioactive material contents of the UN1A2 Specification Package were defined in 49 CFR. A UN1A2 Specification Package was authorized to ship up to 350 grams of U-235 in any enrichment and in any non-pyrophoric form. The design was specified as a 55-gallon 1A2 drum overpack with a body constructed from 18 gauge steel with a 16 gauge drum lid. Drum closure was specified as a standard 12-gauge ring closure. The inner product container size was not specified but was listed as any container that met Specification 7A requirements per 49 CFR 178.350. Specification 7A containers were required to withstand Type A packaging tests required by 49CFR173.465 with compliance demonstrated through testing, analysis or similarity to other containers. The maximum weight of the 7A product container, the radioactive content, and any internal packaging was limited to 200 lbs. The total gross weight for the UN1A2 Specification Package was limited to 350 lbs. No additional restrictions were applied. Authorization for use did not require the UN1A2 Specification Package to be tested to the Normal Conditions of Transport (NCT) and Hypothetical Accident Conditions (HAC) required for performance based, Type A(F) packages certified by the NRC or DOE. The Type A(F) Packaging design discussed in this paper is required to be in compliance with the regulatory safety requirements defined in Code of Federal Regulations (CFR) 10 CFR 71.41 through 71.47 and 10 CFR71.71. Sub-criticality of content must be maintained under the Hypothetical Accident Conditions specified under 10 CFR71.73. These federal regulations, and other applicable DOE Orders and Guides, govern design requirements for a Type A(F) package. Type A(F) packages with less than an A2 quantity of radioactive material are not required to have a leak testable boundary. With this exception a Type A(F) package design is subject to the same test requirements set forth for the design of a performance based Type B packaging.