National Library of Energy BETA

Sample records for degree days composition

  1. Calculation of variable-base degree-days and degree-nights from monthly average temperatures

    SciTech Connect (OSTI)

    Sonderegger, R.; Cleary, P.; Dickinson, B.

    1985-01-01

    The Computerized Instrumented Residential Audit (CIRA), a micro-computer building energy analysis program developed at Lawrence Berkeley Laboratory, uses a monthly variable-base degree-day method to calculate heating and cooling loads. The method's unique feature is its ability to model thermostat setbacks and storage of solar gain. The program accomplishes this by dividing each day into two periods, ''average day'' (8 a.m. to 8 p.m.) and ''average night'' (8 p.m. to 8 a.m.), with different base temperatures. For each mode (heating or cooling) and for each period (day or night), the program reconstructs degree-days as a function of average monthly day or night temperature using three empirical coefficients specific to the location. A comparison is made between degree-days computed from hourly weather tapes and those predicted using this method. The root mean square error between predicted and actual degree days is typically between 3 and 12 degree-days per month. Tables of the coefficients are given for over 150 locations in the United States, computed from hourly dry-bulb temperatures on TRY and TMY tapes. Seasonal predictions of heating and cooling energy budgets using this method show good correspondence to the DOE-2 hourly simulation method.

  2. Trends in Heating and Cooling Degree Days: Implications for Energy Demand Issues (released in AEO2008)

    Reports and Publications (EIA)

    2008-01-01

    Weather-related energy use, in the form of heating, cooling, and ventilation, accounted for more than 40% of all delivered energy use in residential and commercial buildings in 2006. Given the relatively large amount of energy affected by ambient temperature in the buildings sector, the Energy Information Administration has reevaluated what it considers normal weather for purposes of projecting future energy use for heating, cooling, and ventilation. The Annual Energy Outlook 2008, estimates of normal heating and cooling degree-days are based on the population-weighted average for the 10-year period from 1997 through 2006.

  3. Effect of deacetylation degree in chitosan composite membranes on pervaporation performance

    SciTech Connect (OSTI)

    Lee, Y.M.; Park, H.B.; Nam, S.Y.; Won, J.M.; Kim, H.

    1998-06-01

    The effect of the degree of deacetylation in chitosan composite membranes on their pervaporation performance for ethanol dehydration was investigated. The degree of deacetylation of chitosans was measured by using an infrared spectroscopic method and elemental analysis. The chitosan composite membranes were prepared by coating a chitosan solution onto a microporous polyethersulfone membrane with 3--7 nm pore sizes. Then the surface of the top layer (chitosan) of well-dried membranes was crosslinked with sulfuric acid, and pervaporation experiments for binary mixtures (water-ethanol) were carried out at various conditions. In the case of a chitosan membrane with a high degree of deacetylation, the flux increases while the separation factor decreases compared with membranes with a low degree of deacetylation.

  4. Insolation data manual: long-term monthly averages of solar radiation, temperature, degree-days and global anti K/sub T/ for 248 national weather service stations

    SciTech Connect (OSTI)

    Knapp, C L; Stoffel, T L; Whitaker, S D

    1980-10-01

    Monthly averaged data is presented which describes the availability of solar radiation at 248 National Weather Service stations. Monthly and annual average daily insolation and temperature values have been computed from a base of 24 to 25 years of data. Average daily maximum, minimum, and monthly temperatures are provided for most locations in both Celsius and Fahrenheit. Heating and cooling degree-days were computed relative to a base of 18.3/sup 0/C (65/sup 0/F). For each station, global anti K/sub T/ (cloudiness index) were calculated on a monthly and annual basis. (MHR)

  5. Predicting primary crystalline phase and liquidus temperature above or below 1050{degrees}C as functions of glass composition

    SciTech Connect (OSTI)

    Redgate, P.E.; Piepel, G.F.

    1996-02-01

    This report presents the results of applying statistical empirical modeling techniques to primary crystalline phase at the liquidus temperature (T{sub L}) and (ii) whether liquidus temperature is above or below 1050{degree}C (1OO{degree}C below a melting temperature of 1150{degree}C). Data used in modeling primary crystalline phase and liquidus temperate are from the Composition Variability Study (CVS) of Hanford waste glass compositions and properties. The majority of the 123 CVS glasses are categorized into one of 13 primary crystalline phases (at the liquidus temperature). They are also classified as to having T{sub L} Above or Below 1050{degree}C. Two common statistical methods used to model such categorical data are the multinomial logit and classification tree models. The classification tree models provided an overall better modeling approach than did the multinomial logit models. The performance of models in this report should be compared to the performance of the revised ``Development of Models and Software for Liquidus Temperature of Glasses of HWVP Products`` models from Ecole Polytechnique. If the Ecole Polytechnique models perform better than the models discussed in this report, no additional effort on these models would be needed. However, if the converse is true, it may be worthwhile to invest additional effort on statistical empirical modeling methods.

  6. Constraining the atmospheric composition of the day-night terminators of HD 189733b: Atmospheric retrieval with aerosols

    SciTech Connect (OSTI)

    Lee, Jae-Min; Irwin, Patrick G. J.; Fletcher, Leigh N.; Barstow, Joanna K.; Heng, Kevin

    2014-07-01

    A number of observations have shown that Rayleigh scattering by aerosols dominates the transmission spectrum of HD 189733b at wavelengths shortward of 1 ?m. In this study, we retrieve a range of aerosol distributions consistent with transmission spectroscopy between 0.3-24 ?m that were recently re-analyzed by Pont et al. To constrain the particle size and the optical depth of the aerosol layer, we investigate the degeneracies between aerosol composition, temperature, planetary radius, and molecular abundances that prevent unique solutions for transit spectroscopy. Assuming that the aerosol is composed of MgSiO{sub 3}, we suggest that a vertically uniform aerosol layer over all pressures with a monodisperse particle size smaller than about 0.1 ?m and an optical depth in the range 0.002-0.02 at 1 ?m provides statistically meaningful solutions for the day/night terminator regions of HD 189733b. Generally, we find that a uniform aerosol layer provide adequate fits to the data if the optical depth is less than 0.1 and the particle size is smaller than 0.1 ?m, irrespective of the atmospheric temperature, planetary radius, aerosol composition, and gaseous molecules. Strong constraints on the aerosol properties are provided by spectra at wavelengths shortward of 1 ?m as well as longward of 8 ?m, if the aerosol material has absorption features in this region. We show that these are the optimal wavelengths for quantifying the effects of aerosols, which may guide the design of future space observations. The present investigation indicates that the current data offer sufficient information to constrain some of the aerosol properties of HD189733b, but the chemistry in the terminator regions remains uncertain.

  7. Mineralogical textural and compositional data on the alteration of basaltic glass from Kilauea, Hawaii to 300 degrees C: Insights to the corrosion of a borosilicate glass waste-form. [Yucca Mountain Project

    SciTech Connect (OSTI)

    Smith, D.K.

    1990-01-01

    Mineralogical, textural and compositional data accompanying greenschist facies metamorphism (to 300{degrees}C) of basalts of the East Rift Zone (ERZ), Kilauea, Hawaii may be evaluated relative to published and experimental results for the surface corrosion of borosilicate glass. The ERZ alteration sequence is dominated by intermittent palagonite, interlayered smectite-chlorite, chlorite, and actinolite-epidote-anhydrite. Alteration is best developed in fractures and vesicles where surface reaction layers root on the glass matrix forming rinds in excess of 100 microns thick. Fractures control fluid circulation and the alteration sequence. Proximal to the glass surface, palagonite, Fe-Ti oxides and clays replace fresh glass as the surface reaction layer migrates inwards; away from the surface, amphibole, anhydrite, quartz and calcite crystallize from hydrothermal fluids in contact with the glass. The texture and composition of basaltic glass surfaces are similar to those of a SRL-165 glass leached statically for sixty days at 150 {degrees}C. While the ERZ reservoir is a complex open system, conservative comparisons between the alteration of ERZ and synthetic borosilicate glass are warranted. 31 refs., 2 figs.

  8. Stable lead isotope compositions in selected coals from around the world and implications for present day aerosol source tracing

    SciTech Connect (OSTI)

    M. Diaz-Somoano; M.E. Kylander; M.A. Lopez-Anton; I. Suarez-Ruiz; M.R. Martinez-Tarazona; M. Ferrat; B. Kober; D.J. Weiss

    2009-02-15

    The phasing out of leaded gasoline in many countries around the world at the end of the last millennium has resulted in a complex mixture of lead sources in the atmosphere. Recent studies suggest that coal combustion has become an important source of Pb in aerosols in urban and remote areas. Lead concentration and isotopic composition is reported for 59 coal samples representing major coal deposits worldwide in an attempt to characterize this potential source. The average concentration in these coals is 35 {mu}g Pb g{sup -1}, with the highest values in coals from Spain and Peru and the lowest in coals from Australia and North America. The {sup 206}Pb/{sup 207}Pb isotope ratios range between 1.15 and 1.24, with less radiogenic Pb in coals from Europe and Asia compared to South and North America. Comparing the Pb isotopic signatures of coals from this and previous studies with those published for Northern and Southern Hemisphere aerosols, we hypothesize that coal combustion might now be an important Pb source in China, the eastern U.S., and to some extent, in Europe but not as yet in other regions including South Africa, South America, and western U.S. This supports the notion that 'old Pb pollution' from leaded gasoline reemitted into the atmosphere or long-range transport (i.e., from China to the western U.S.) is important. Comparing the isotope ratios of the coals, the age of the deposits, and Pb isotope evolution models for the major geochemical reservoirs suggests that the lead isotope ratios (PbIC) in coals is strongly influenced by the depositional coal forming environment. 47 refs., 3 figs., 1 tab.

  9. labor day

    National Nuclear Security Administration (NNSA)

    0%2A en Labor Day Weekend 2015 http:nnsa.energy.govbloglabor-day-weekend-2015

    Labor Day is dedicated to the achievements of American workers and the contributions they made...

  10. Data Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Day Data Day NERSC is hosting a series of data-centric events, called Data Day. Data Day 2016 August 22nd - 23rd, 2016 Wang Hall (LBNL Building 59) and Building 50 AuditoriumLawrence Berkeley National Laboratory This summer, NERSC will host a brand new, data-centric event, Data Day. The main event will take place on August 22, followed by a half-day hackathon on August 23. The goal: to bring together researchers who use, or are interested in using, NERSC systems for data-intensive work. On

  11. Pi Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    digits of in decimal form. Some people are campaigning to replace Pi Day with Tau Day, June 28. Can you figure out why? Pi is the ratio of the circumference of a circle...

  12. Lorraine Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lorraine Day, Ph.D. Title: Safety Officer Adjunct Professor in Nuclear Science Center Office Tel. : (225) 578-4616 Pager: 952-5892...

  13. Lorraine Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lorraine Day, Ph.D. Title: Safety Officer (Safety Program Administrator) Adjunct Professor in Nuclear Science Center Office Tel. : (225) 578-4616...

  14. Earth Day | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Day

  15. CEMI Days

    SciTech Connect (OSTI)

    2015-07-01

    CEMI Days are an important channel of engagement between DOE and the manufacturing industry to identify challenges and opportunities for increasing U.S. manufacturing competitiveness. CEMI Days that are held at manufacturing companies’ facilities can include tours of R&D operations or other points of interest determined by the host company.

  16. Memorial Day

    Broader source: Energy.gov [DOE]

    Three years after the Civil War ended, on May 5, 1868, the head of an organization of Union veterans, the Grand Army of the Republic (GAR), established Decoration Day as a time for the nation to decorate the graves of the war dead with flowers. Maj. Gen. John A. Logan declared that Decoration Day should be observed on May 30. It is believed that date was chosen because flowers would be in bloom all over the country.

  17. Kuhio Day

    Broader source: Energy.gov [DOE]

    Prince Kuhio Day is an official State of Hawaii holiday and it honors Hawaiian Prince Jonah Kuhio Kalanianaole Piikoi. It takes place every year on March 26, the birthday of the prince. Prince Kuhio was born on March 26, 1871 and he died on January 7, 1922.

  18. Earth Day 2016

    Broader source: Energy.gov [DOE]

    Earth Day 2016 event details and links. Earth Day video montage and Earth Day Nationals video link. Earth Day photo contest.

  19. Enhanced photocatalytic efficiency of NiS/TiO{sub 2} composite catalysts using sunset yellow, an azo dye under day light illumination

    SciTech Connect (OSTI)

    Rajamanickam, D.; Dhatshanamurthi, P.; Shanthi, M.

    2015-01-15

    Highlights: • NiS/TiO{sub 2} was successfully synthesized by sol–gel method. • This new method of preparation gives a homogeneous dispersion of NiS on TiO{sub 2}. • Degradation activity of NiS/TiO{sub 2} is found to be more efficient than other catalysts. • Addition of oxidants enhances the degradation efficiency significantly. • COD measurements reveal the complete mineralization of dye molecules. • The catalyst is found to be reusable. - Abstract: To improve the solar light induced photocatalytic application performances of TiO{sub 2}, in this study, the NiS modified TiO{sub 2} composite photocatalysts with various ratios of NiS to TiO{sub 2} were prepared by sol–gel method. The catalyst was characterized by X-ray diffraction (XRD), high resolution scanning electron microscope (HR-SEM), high resolution transmission electron microscope (HR-TEM), energy dispersive spectra (EDS), diffuse reflectance spectra (DRS), photoluminescence spectra (PL), X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller (B–E–T) surface area measurement methods. The photocatalytic activity of NiS/TiO{sub 2} was investigated for the degradation of sunset yellow (SY) in aqueous solution using solar light. The NiS/TiO{sub 2} is found to be more efficient than prepared TiO{sub 2} and TiO{sub 2}–P25 at pH 7 for the mineralization of SY. The effects of operational parameters such as the amount of photocatalyst, dye concentration and initial pH on photo mineralization of SY have been analyzed. The degradation was strongly enhanced in the presence of oxidants such as H{sub 3}K{sub 5}O{sub 18}S{sub 4} (Oxone), KIO{sub 4}, and KBrO{sub 3}. The mineralization of SY has been identified by COD measurements. The catalyst is found to be reusable.

  20. Earth Day, Every Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Week festivities at our headquarters here in Washington, D.C. throughout this week. This year's theme is "Earth Day, Every Day Changing Behavior to Reduce DOE's Carbon Footprint." ...

  1. Smithsonian's Museum Day September

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Day is a day when museums and cultural institutions across the nation open their doors free of charge to Smithsonian magazine subscribers and Smithsonian.com visitors. A...

  2. Data Day 2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Day » Data Day 2016 Data Day 2016 August 22nd - 23rd, 2016 Wang Hall (LBNL Building 59) and Building 50 Auditorium Lawrence Berkeley National Laboratory This summer, NERSC will host a brand new, data-centric event, Data Day. The main event will take place on August 22, followed by a half-day hackathon on August 23. The goal: to bring together researchers who use, or are interested in using, NERSC systems for data-intensive work. On August 22, a full day of talks and tutorials will get you up

  3. DOE Catalyst Demo Day

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy is organizing Catalyst Demo Day at the Franklin Institute in Philadelphia to showcase the next big startups in building energy efficiency and solar energy. Demo Day...

  4. Postdoc Research Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Day Postdoc Research Day Point your career towards Los Alamos Lab: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality...

  5. Postdoc Research Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Day Postdoc Research Day Point your career towards Los Alamos Lab: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. Contact Postdoc Program Office Email Postdoc Research Day 2016 At Postdoc Research Day 2016, 70 postdocs showcased their research. The Judging Panel included Dr. Thomas Bowles, former Chief Scientist and Chief Science Officer Los Alamos National Laboratory; Dr. Kim Budil, the Vice

  6. Argonne's Earth Day 2011

    ScienceCinema (OSTI)

    None

    2013-04-19

    Argonne celebrated Earth Day on April 21, 2011 with an event that featured green activities and information booths.

  7. Smithsonian's Museum Day September

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 September 21, 2010 LOS ALAMOS, New Mexico, September 21, 2010-Los Alamos National Laboratory's Bradbury Science Museum is participating for the sixth year in the Smithsonian's Museum Day on Saturday, September 25. Sponsored by Smithsonian Media, Museum Day is a day when participating museums and cultural institutions across the nation open their doors free of charge to anyone presenting a Smithsonian Museum Day ticket. "The Bradbury Science Museum already has a free-admission policy, but

  8. NanoDays

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NanoDays NanoDays WHEN: Apr 03, 2015 10:00 AM - Apr 12, 2015 5:00 PM WHERE: Bradbury Science Museum 1350 Central Ave, Los Alamos, NM 87544, USA CONTACT: Jessica Privette 505 667-0375 CATEGORY: Bradbury Science INTERNAL: Calendar Login NanoDays - April 3-12, 2015 Event Description NanoDays is a nationwide festival of educational programs about nanoscale science and engineering and its potential impact on the future. The Bradbury Science Museum celebrates NanoDays during Spring Break week, April

  9. National Day of Remembrance

    SciTech Connect (OSTI)

    2010-01-01

    Ames Laboratory observed the National Day of Remembrance for weapons workers from the Cold War era with a ceremony held Oct. 27, 2009 at the Ames Public Library.

  10. Conflict Resolution Day

    Broader source: Energy.gov [DOE]

    Conflict Resolution Day takes a look at mediation, conciliation, negotiation, arbitration, the ombudsman, and facilitation to resolve conflict in the workplace. Employees and contractors are...

  11. NanoDays

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NanoDays NanoDays WHEN: Mar 24, 2016 10:00 AM - Apr 03, 2016 5:00 PM WHERE: Bradbury Science Museum 1350 Central Ave, Los Alamos, NM 87544, USA CONTACT: Linda Anderman (505) 665-9196 CATEGORY: Bradbury INTERNAL: Calendar Login Event Description NanoDays is a national festival of educational programs about nanoscale science and engineering and it's potential impact on the future. The Bradbury Science Museum will celebrate NanoDays over local spring break, March 24 - April 3, 2016. At the

  12. Celebrating Pi Day

    Broader source: Energy.gov [DOE]

    We are celebrating this Pi Day with a brief overview of the irrational and transcendental number known as Pi, with baked homophone.

  13. National Day of Remembrance

    ScienceCinema (OSTI)

    None

    2013-03-01

    Ames Laboratory observed the National Day of Remembrance for weapons workers from the Cold War era with a ceremony held Oct. 27, 2009 at the Ames Public Library.

  14. Happy Earth Day 2011!

    Broader source: Energy.gov [DOE]

    Check out these resources from the Department of Energy to help you celebrate, get in the Earth Day spirit, and take action.

  15. Earth Day 2016

    Broader source: Energy.gov [DOE]

    April 22, 2016 is the forty-sixth anniversary of the founding of Earth Day which marked the beginning of the modern environmental movement. The Office of Environment, Health, Safety and Security (AU) is leading DOE’s coordinated Earth Day celebrations at the Forrestal DOE Headquarters Building in Washington, D.C.

  16. Bandwidth Historical Peak Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bandwidth Historical Peak Days Bandwidth Historical Peak Days These plots show yearly peak days from 2000 to the present. BE CAREFUL because the graphs are autoscaling - check the scales on each axis before you compare graphs. Note that the graph for current year shows the data for the year-to-date peak. Transfer Rate vs. Size Transfer Rate vs. Size Transfer Rate vs. Size Transfer Rate vs. Size Transfer Rate vs. Size Transfer Rate vs. Size Transfer Rate vs. Size Transfer Rate vs. Size Transfer

  17. Holocaust Days of Remembrance

    Broader source: Energy.gov [DOE]

    The United States Congress established the Days of Remembrance as our nation’s annual commemoration of the Holocaust and created the United States Holocaust Memorial Museum as a permanent living...

  18. HOLOCAUST REMEMBRANCE DAY

    Broader source: Energy.gov [DOE]

    The United States Congress established the Days of Remembrance as our nation’s annual commemoration of the Holocaust and created the United States Holocaust Memorial Museum as a permanent living memorial to the victims.

  19. EERE INDUSTRY DAY

    Office of Energy Efficiency and Renewable Energy (EERE)

    On September 23-24, 2015 the inaugural EERE Industry Day was held at Oak Ridge National Laboratory to foster relationships and encourage dialog among researchers, industry representatives, and U.S. Department of Energy representatives.

  20. Optima Stakeholder Listening Day

    Broader source: Energy.gov [DOE]

    he Department of Energy’s Bioenergy Technologies and Vehicle Technologies Offices (BETO and VTO) are co-hosting a stakeholder Listening Day to help shape a major new Sustainable Transportation initiative: Co-optimization of Fuels and Engines (Optima).

  1. IT Job Shadow Day

    Broader source: Energy.gov [DOE]

    IT Job Shadow Day aims to educate and engage high school students in a variety of information technology careers within the federal government. Participating students will shadow federal technology professionals at federal workplaces.

  2. National Bioenergy Day 2014

    Broader source: Energy.gov [DOE]

    Bioenergy, the use of agricultural waste and forestry byproducts to generate heat and energy, will be celebrated during the second annual National Bioenergy Day on October 22, 2014. This is an...

  3. Data Privacy Day

    Broader source: Energy.gov [DOE]

    Respecting Privacy, Safeguarding Data and Enabling Trust is the theme for Data Privacy Day (DPD), an international effort held annually on January 28 to create awareness about the importance of privacy and protecting personal information.

  4. Lab celebrates Earth Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab celebrates Earth Day Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Lab celebrates Earth Day Multiple activities focus on environmental protection. May 1, 2013 A team from Industrial Hygiene and Safety during the Great Garbage Grab A team from Industrial Hygiene and Safety during the Great Garbage Grab. Contact Editor Linda Anderman Email Community Programs Office Kurt Steinhaus

  5. Tape Mounts Last 30 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tape Mounts Last 30 Days Tape Mounts Last 30 Days Daily Tape Mounts

  6. NUG 2013 Business Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    » Business Day NUG 2013 Business Day NUG Business Meeting Agenda Tuesday, February 12, 2013 NERSC Oakland Scientific Facility 8:30 - Working Breakfast: Welcome and Introductions -- Stephane Ethier 9:00 - NERSC Accomplishments and Plans -- Francesca Verdier 9:30 - Department of Energy Update -- Dave Goodwin 9:45 - NERSC's New Building Update -- Brent Draney 10:00 - Edison Update -- Richard Gerber, Tina DeClerck, Zhengji Zhao 10:30 - Break 10:45 - The NERSC 8 Procurement -- Katie Antypas 11:15 -

  7. Day/Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dawn Levy About Us Dawn Levy - Oak Ridge National Laboratory Dawn Levy is a science writer at Oak Ridge National Laboratory, one of the Department of Energy's 17 National Laboratories. She covers physics, chemistry and materials science. Most Recent This New Plastic Is 50% Renewable April 18

    Day 1 at 2014 ARPA-E Innovation Summit Day 1 at 2014 ARPA-E Innovation Summit February 24, 2014 - 6:52pm Addthis Through its PETRO program, ARPA-E is working to develop non-food crops that directly

  8. Science and Technology Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science and Technology Day Science and Technology Day February 24, 2015 Tuesday, Feb. 24 Berkeley Lab Building 50 Auditorium Attendance is open to anyone. Remote streaming is available at hosting.epresence.tv/lbl (Broadcast only) Time Title Speaker 8:15 Registration 8:55 Welcome Sudip Dosanjh, NERSC Director 9:00 The Year in Science at NERSC Richard Gerber, NERSC Senior Science Advisor 9:30 Science Keynote: Efficient modeling of laser-plasma accelerators using the ponderomotive-based code

  9. Pi Day on Monday

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pi Day on Monday Pi Day on Monday WHEN: Mar 14, 2016 1:00 PM - 5:00 PM WHERE: Bradbury Science Museum 1350 Central Ave, Los Alamos, NM 87544, USA CONTACT: Linda Anderman (505) 665-9196 CATEGORY: Bradbury INTERNAL: Calendar Login Event Description Come "around" for this once-time-a-year event. Stop by on Monday, March 14 (or 3.14 in geek-speak) during our regular hours from 1 to 5 p.m. to learn fascinating and fun facts about circles-that shape you see everyday but don't notice. In

  10. National Bioenergy Day 2015

    Broader source: Energy.gov [DOE]

    Bioenergy, the use of agricultural waste and forestry byproducts to generate heat and energy, will be celebrated during the third annual National Bioenergy Day on October 22, 2014. This is an opportunity to showcase bioenergy facilities and the bioenergy supply chain around the United States. The Bioenergy Technologies Office (BETO) will celebrate National Bioenergy Day with an educational display about the bioenergy supply chain and the bioeconomy in the lobby of the Energy Department’s Forrestal building in downtown Washington, D.C.

  11. Table 26. Natural gas home customer-weighted heating degree...

    U.S. Energy Information Administration (EIA) Indexed Site

    6:14:01 PM Table 26. Natural gas home customer-weighted heating degree days MonthYear... Table 26 Created on: 4262016 6:14:07 PM Table 26. Natural gas home customer-weighted ...

  12. Proceedings, Dean's Day 1999

    SciTech Connect (OSTI)

    Zanner, M.A.

    1999-03-01

    On January 14--15, 1999, Sandia National Laboratories sponsored Deans Day, a conference for the Deans of Engineering and other executive-level representatives from 29 invited universities. Through breakout sessions and a wrap-up discussion, university and Sandia participants identified activities to further develop their strategic relationships. The four primary activities are: (A) concentrate joint efforts on current and future research strengths and needs; (B) attract the best students (at all grade levels) to science and engineering; (C) promote awareness of the need for and work together to influence a national science and technology R and D policy; and (D) enable the universities and Sandia to be true allies, jointly pursuing research opportunities and funding from government agencies and industry.

  13. Pi Day of the Century

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    505 667-0375 CATEGORY: Bradbury INTERNAL: Calendar Login Pi Event Description A special day celebrating this once-in-a-century occasion. Pi Day is an annual celebration...

  14. Aggregate Transfers Last 8 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transfers Last 8 Days Aggregate Transfers Last 8 Days These plots show the aggregate bandwidth statistics for the past eight days with the most recent day shown first. BE CAREFUL because the graphs are autoscaling - check the scales on each axis before you compare graphs. BW (Both Systems) BW (Both Systems) BW (Both Systems) BW (Both Systems) BW (Both Systems) BW (Both Systems) BW (Both Systems) BW (Both Systems) Last edited: 2011-04-04 10:44:03

  15. Transfer Activity Last 8 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Activity Last 8 Days Transfer Activity Last 8 Days These graphs show the transfer activity statistics for the past eight days with the most recent day shown first. BE CAREFUL because the graphs are autoscaling - check the scales on each axis before you compare graphs. Transfers started/in progress (Both Systems) Transfers started/in progress (Both Systems) Transfers started/in progress (Both Systems) Transfers started/in progress (Both Systems) Transfers started/in progress (Both Systems)

  16. Concurrent Transfers Last 8 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transfers Last 8 Days Concurrent Transfers Last 8 Days These plots show the concurrent transfers statistics for the past eight days with the most recent day shown first. BE CAREFUL because the graphs are autoscaling - check the scales on each axis before you compare graphs. Concurrency (Both Systems) Concurrency (Both Systems) Concurrency (Both Systems) Concurrency (Both Systems) Concurrency (Both Systems) Concurrency (Both Systems) Concurrency (Both Systems) Concurrency (Both Systems) Last

  17. Comparison of 180-degree and 90-degree needle rotation to reduce wound size in PIT-injected juvenile Chinook salmon

    SciTech Connect (OSTI)

    Bryson, Amanda J.; Woodley, Christa M.; Karls, Rhonda K.; Hall, Kathleen D.; Weiland, Mark A.; Deng, Zhiqun; Carlson, Thomas J.; Eppard, Matthew B.

    2013-04-30

    Animal telemetry, which requires the implantation of passive transponders or active transmitters, is used to monitor and assess fish stock and conservation to gain an understanding of fish movement and behavior. As new telemetry technologies become available, studies of their effects on species of interest are imperative as is development of implantation techniques. In this study, we investigated the effects of bevel rotation (0-, 90-, 180-degree axis rotation) on wound extent, tag loss, and wound healing rates in juvenile Chinook salmon injected with an 8-gauge needle, which is required for implantation of the novel injectable Juvenile Salmon Acoustic Telemetry Systems (JSATS) acoustic transmitter or large passive integrated transponder (PIT) tags. Although the injection sites were not closed after injection (e.g., with sutures or glue), there were no mortalities, dropped tags, or indications of fungus, ulceration, and/or redness around the wound. On Day 0 and post-implantation Day 7, the 90-degree bevel rotation produced smaller wound extent than the 180-degree bevel rotation. No axis rotation (0-degrees) resulted in the PIT tag frequently misleading or falling out upon injection. The results of this study indicated the 90-degree bevel rotation was the more efficient technique, produced less wound extent. Given the wound extent compared to size of fish, we recommend researchers should consider a 90-degree rotation over the 180-degree rotation in telemetry studies. Highlights •Three degrees of needle rotation were examined for effects in Chinook salmon. •Mortality, tag loss, wound extent, healing, and infection indicators were measured. •There were no mortalities, tag loss, or indications of infection. •The 90-degree needle rotation through Day 7 produced the smallest wound extent.

  18. Six degree of freedom sensor

    DOE Patents [OSTI]

    Vann, C.S.

    1999-03-16

    This small, non-contact optical sensor increases the capability and flexibility of computer controlled machines by detecting its relative position to a workpiece in all six degrees of freedom (DOF). At a fraction of the cost, it is over 200 times faster and up to 25 times more accurate than competing 3-DOF sensors. Applications range from flexible manufacturing to a 6-DOF mouse for computers. Until now, highly agile and accurate machines have been limited by their inability to adjust to changes in their tasks. By enabling them to sense all six degrees of position, these machines can now adapt to new and complicated tasks without human intervention or delay--simplifying production, reducing costs, and enhancing the value and capability of flexible manufacturing. 3 figs.

  19. Six degree of freedom sensor

    DOE Patents [OSTI]

    Vann, Charles S.

    1999-01-01

    This small, non-contact optical sensor increases the capability and flexibility of computer controlled machines by detecting its relative position to a workpiece in all six degrees of freedom (DOF). At a fraction of the cost, it is over 200 times faster and up to 25 times more accurate than competing 3-DOF sensors. Applications range from flexible manufacturing to a 6-DOF mouse for computers. Until now, highly agile and accurate machines have been limited by their inability to adjust to changes in their tasks. By enabling them to sense all six degrees of position, these machines can now adapt to new and complicated tasks without human intervention or delay--simplifying production, reducing costs, and enhancing the value and capability of flexible manufacturing.

  20. Fifty Degrees North, Four Degrees West - Microbial Bebop

    SciTech Connect (OSTI)

    Peter Larsen

    2012-10-01

    This musical composition was created from data of microbes (bacteria, algae and other microorganisms) sampled in the English Channel. Argonne National Laboratory biologist Peter Larsen created the songs as a unique way to present and comprehend large datasets. More details: All of the data in this composition derives from twelve observed time points collected at monthly intervals at the L4 Station during 2007. The composition is composed of seven choruses. Each chorus has the same chord progression of 12 measures each in which chords are derived from monthly measures of temperature and chlorophyll A concentrations. The first and last chorus melodies are environmental parameter data as in 'Blues for Elle'. The melody in each of the second through sixth chorus is generated from the relative abundances of one of the five most common microbial taxa: Rickettsiales, Rhodobacteriales, Flavobacteriales, Cyanobactera, and Pseudomondales. A different 'instrument' is used to represent each microbial taxon. Melodies for microbial taxa were generated as in 'Far and Wide'. More information at http://www.anl.gov/articles/songs-key... Image: Cyanobacteria, probably genus Gloeotrichia, taken in darkfield. Credit Specious Reasons via Flickr Creative Commons (http://www.flickr.com/photos/28594931...)

  1. George Washington Carver Recognition Day

    Broader source: Energy.gov [DOE]

    In commemoration of George Washington Carver’s life and work, Congress declared January 5 as George Washington Carver Recognition Day.

  2. 2016 CSP Summit Day 1

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below are links to the agenda, presentations, and plenary sessions from the first day of the 2016 SunShot CSP Summit.

  3. Innovative Manufacturing Initiative Recognition Day

    Broader source: Energy.gov [DOE]

    The Innovative Manufacturing Initiative (IMI) Recognition Day (held in Washington, DC on June 20, 2012) showcased IMI projects selected by the Energy Department to help American manufacturers...

  4. Pi Day of the Century

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pi Day of the Century Pi Day of the Century WHEN: Mar 14, 2015 11:00 AM - 1:00 PM WHERE: Bradbury Science Museum 1350 Central Ave, Los Alamos, New Mexico, USA CONTACT: Jessica Privette 505 667-0375 CATEGORY: Bradbury INTERNAL: Calendar Login Pi Event Description A special day celebrating this once-in-a-century occasion. Pi Day is an annual celebration commemorating the mathematical constant π, a never-ending, transcendental number representing the ratio of a circle's circumference to its

  5. ALS Holds Annual Safety Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Holds Annual Safety Day ALS Holds Annual Safety Day Print by Scott Taylor, ALS Safety Manager Andrew Doran cleans equipment housing at Beamline 12.2.2. The ALS held its annual safety day on Monday, June 13 for all ALS and associated staff. The day started with an all-hands meeting, beginning with presentations by ALS Director Roger Falcone and LBNL Environmental Health and Safety Division Director (and former ALS Safety Manager) Jim Floyd. Both discussed the importance of the incorporation

  6. Property:DayQuantity | Open Energy Information

    Open Energy Info (EERE)

    are not known. Acceptable units (and their conversions) are: 1 day,Day,days,Days,DAY,DAYS,d,D 24 hour,hours,Hour,Hours,hr,hrs,HOUR,HOURS,HR,HRS 1440 minute,minutes,Minute,Minutes,m...

  7. Determining the slag fraction, water/binder ratio and degree of hydration in hardened cement pastes

    SciTech Connect (OSTI)

    Yio, M.H.N. Phelan, J.C.; Wong, H.S.; Buenfeld, N.R.

    2014-02-15

    A method for determining the original mix composition of hardened slag-blended cement-based materials based on analysis of backscattered electron images combined with loss on ignition measurements is presented. The method does not require comparison to reference standards or prior knowledge of the composition of the binders used. Therefore, it is well-suited for application to real structures. The method is also able to calculate the degrees of reaction of slag and cement. Results obtained from an experimental study involving sixty samples with a wide range of water/binder (w/b) ratios (0.30 to 0.50), slag/binder ratios (0 to 0.6) and curing ages (3 days to 1 year) show that the method is very promising. The mean absolute errors for the estimated slag, water and cement contents (kg/m{sup 3}), w/b and s/b ratios were 9.1%, 1.5%, 2.5%, 4.7% and 8.7%, respectively. 91% of the estimated w/b ratios were within 0.036 of the actual values. -- Highlights: •A new method for estimating w/b ratio and slag content in cement pastes is proposed. •The method is also able to calculate the degrees of reaction of slag and cement. •Reference standards or prior knowledge of the binder composition are not required. •The method was tested on samples with varying w/b ratios and slag content.

  8. Electrically conductive cellulose composite

    DOE Patents [OSTI]

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2010-05-04

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  9. Optima Stakeholder Listening Day Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Agenda 16-17 June 2015 Maxwell Conference Room - Energy Systems Integration Facility National Renewable Energy Laboratory, Golden, Colorado Day 1 Half-day: 11:00 - 17:30 11:00 Arrival, lunch (available for purchase, pre-order required), and networking 12:00 Introduction 12:20 Overview of the Optima initiative 13:00 Listening Day goals 13:45 Break 14:15 Working Session 1: Scoping new horizons for fuels and vehicles 15:45 Break 16:15 Working Session 2: Fuel and vehicle interactions - Thrust 1

  10. The Ocean Sampling Day Consortium

    SciTech Connect (OSTI)

    Kopf, Anna; Bicak, Mesude; Kottmann, Renzo; Schnetzer, Julia; Kostadinov, Ivaylo; Lehmann, Katja; Fernandez-Guerra, Antonio; Jeanthon, Christian; Rahav, Eyal; Ullrich, Matthias; Wichels, Antje; Gerdts, Gunnar; Polymenakou, Paraskevi; Kotoulas, Giorgos; Siam, Rania; Abdallah, Rehab Z.; Sonnenschein, Eva C.; Cariou, Thierry; O’Gara, Fergal; Jackson, Stephen; Orlic, Sandi; Steinke, Michael; Busch, Julia; Duarte, Bernardo; Caçador, Isabel; Canning-Clode, João; Bobrova, Oleksandra; Marteinsson, Viggo; Reynisson, Eyjolfur; Loureiro, Clara Magalhães; Luna, Gian Marco; Quero, Grazia Marina; Löscher, Carolin R.; Kremp, Anke; DeLorenzo, Marie E.; Øvreås, Lise; Tolman, Jennifer; LaRoche, Julie; Penna, Antonella; Frischer, Marc; Davis, Timothy; Katherine, Barker; Meyer, Christopher P.; Ramos, Sandra; Magalhães, Catarina; Jude-Lemeilleur, Florence; Aguirre-Macedo, Ma Leopoldina; Wang, Shiao; Poulton, Nicole; Jones, Scott; Collin, Rachel; Fuhrman, Jed A.; Conan, Pascal; Alonso, Cecilia; Stambler, Noga; Goodwin, Kelly; Yakimov, Michael M.; Baltar, Federico; Bodrossy, Levente; Van De Kamp, Jodie; Frampton, Dion M. F.; Ostrowski, Martin; Van Ruth, Paul; Malthouse, Paul; Claus, Simon; Deneudt, Klaas; Mortelmans, Jonas; Pitois, Sophie; Wallom, David; Salter, Ian; Costa, Rodrigo; Schroeder, Declan C.; Kandil, Mahrous M.; Amaral, Valentina; Biancalana, Florencia; Santana, Rafael; Pedrotti, Maria Luiza; Yoshida, Takashi; Ogata, Hiroyuki; Ingleton, Tim; Munnik, Kate; Rodriguez-Ezpeleta, Naiara; Berteaux-Lecellier, Veronique; Wecker, Patricia; Cancio, Ibon; Vaulot, Daniel; Bienhold, Christina; Ghazal, Hassan; Chaouni, Bouchra; Essayeh, Soumya; Ettamimi, Sara; Zaid, El Houcine; Boukhatem, Noureddine; Bouali, Abderrahim; Chahboune, Rajaa; Barrijal, Said; Timinouni, Mohammed; El Otmani, Fatima; Bennani, Mohamed; Mea, Marianna; Todorova, Nadezhda; Karamfilov, Ventzislav; ten Hoopen, Petra; Cochrane, Guy; L’Haridon, Stephane; Bizsel, Kemal Can; Vezzi, Alessandro; Lauro, Federico M.; Martin, Patrick; Jensen, Rachelle M.; Hinks, Jamie; Gebbels, Susan; Rosselli, Riccardo; De Pascale, Fabio; Schiavon, Riccardo; dos Santos, Antonina; Villar, Emilie; Pesant, Stéphane; Cataletto, Bruno; Malfatti, Francesca; Edirisinghe, Ranjith; Silveira, Jorge A. Herrera; Barbier, Michele; Turk, Valentina; Tinta, Tinkara; Fuller, Wayne J.; Salihoglu, Ilkay; Serakinci, Nedime; Ergoren, Mahmut Cerkez; Bresnan, Eileen; Iriberri, Juan; Nyhus, Paul Anders Fronth; Bente, Edvardsen; Karlsen, Hans Erik; Golyshin, Peter N.; Gasol, Josep M.; Moncheva, Snejana; Dzhembekova, Nina; Johnson, Zackary; Sinigalliano, Christopher David; Gidley, Maribeth Louise; Zingone, Adriana; Danovaro, Roberto; Tsiamis, George; Clark, Melody S.; Costa, Ana Cristina; El Bour, Monia; Martins, Ana M.; Collins, R. Eric; Ducluzeau, Anne-Lise; Martinez, Jonathan; Costello, Mark J.; Amaral-Zettler, Linda A.; Gilbert, Jack A.; Davies, Neil; Field, Dawn; Glöckner, Frank Oliver

    2015-06-19

    In this study, Ocean Sampling Day was initiated by the EU-funded Micro B3 (Marine Microbial Biodiversity, Bioinformatics, Biotechnology) project to obtain a snapshot of the marine microbial biodiversity and function of the world’s oceans. It is a simultaneous global mega-sequencing campaign aiming to generate the largest standardized microbial data set in a single day. This will be achievable only through the coordinated efforts of an Ocean Sampling Day Consortium, supportive partnerships and networks between sites. This commentary outlines the establishment, function and aims of the Consortium and describes our vision for a sustainable study of marine microbial communities and their embedded functional traits.

  11. EERE Days at Stanford University

    Broader source: Energy.gov [DOE]

    The Department of Energy hosts the Office of Energy Efficiency and Renewable Energy (EERE) Days at Stanford University to engage students and faculty on key energy issues aligned with EERE’s...

  12. The Ocean Sampling Day Consortium

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kopf, Anna; Bicak, Mesude; Kottmann, Renzo; Schnetzer, Julia; Kostadinov, Ivaylo; Lehmann, Katja; Fernandez-Guerra, Antonio; Jeanthon, Christian; Rahav, Eyal; Ullrich, Matthias; et al

    2015-06-19

    In this study, Ocean Sampling Day was initiated by the EU-funded Micro B3 (Marine Microbial Biodiversity, Bioinformatics, Biotechnology) project to obtain a snapshot of the marine microbial biodiversity and function of the world’s oceans. It is a simultaneous global mega-sequencing campaign aiming to generate the largest standardized microbial data set in a single day. This will be achievable only through the coordinated efforts of an Ocean Sampling Day Consortium, supportive partnerships and networks between sites. This commentary outlines the establishment, function and aims of the Consortium and describes our vision for a sustainable study of marine microbial communities and theirmore » embedded functional traits.« less

  13. Earth Day: Leading by Example

    Broader source: Energy.gov [DOE]

    We’re not just interested in talking the talk at the Energy Department, it’s important to us to walk the walk. To do that, we’re working every day across the country to make our operations more sustainable and efficient. Take these employees, for example.

  14. Method of making carbon-carbon composites

    DOE Patents [OSTI]

    Engle, Glen B.

    1993-01-01

    A process for making 2D and 3D carbon-carbon composites having a combined high crystallinity, high strength, high modulus and high thermal and electrical conductivity. High-modulus/high-strength mesophase derived carbon fibers are woven into a suitable cloth. Layers of this easily graphitizible woven cloth are infiltrated with carbon material to form green composites. The carbonized composite is then impregnated several times with pitch by covering the composite with hot pitch under pressure. The composites are given a heat treatment between each impregnant step to crack up the infiltrated carbon and allow additional pitch to enter the microstructure during the next impregnation cycle. The impregnated composites are then given a final heat treatment in the range 2500.degree. to 3100.degree. C. to fully graphitize the fibers and the matrix carbon. The composites are then infiltrated with pyrolytic carbon by chemical vapor deposition in the range 1000.degree. C. to 1300.degree. C. at a reduced. pressure.

  15. Health Physics Enrollments and Degrees, 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    health physics or in an option program equivalent to a major. Twenty-four academic programs reported having health physics programs during 2011. The data for two health physics options within nuclear engineering programs are also included in the enrollments and degrees that are reported in the nuclear engineering enrollments and degrees data. Degree Trends. Bachelor degrees increased slightly between 2010 and 2011, but were 15% less than during 2005 through 2009 and 30% less than in the

  16. Innovative Manufacturing Initiative Recognition Day

    Broader source: Energy.gov [DOE]

    The Innovative Manufacturing Initiative (IMI) Recognition Day (held in Washington, DC on June 20, 2012) showcased IMI projects selected by the Energy Department to help American manufacturers dramatically increase the energy efficiency of their operations and reduce costs. Each project will advance transformational technologies and materials that can benefit a broad cross-section of the domestic economy. This event created a platform for inter-agency and industry networking and also raised awareness among congressional staff and private investors.

  17. Argonne's 2012 Earth Day Event

    ScienceCinema (OSTI)

    None

    2013-04-19

    Argonne's 2012 Earth Day event drew crowds from across the laboratory. Argonne and U.S. Department of Energy employees toured booths and interactive displays set up by Argonne programs and clubs. Several of Argonne's partners participated, including U.S. Department of Energy, University of Chicago, Abri Credit Union, DuPage County Forest Preserve, DuPage Water Commission, PACE and Morton Arboretum. Argonne scientists and engineers also participated in a poster session, discussing their clean energy research.

  18. 2013 Nuclear Workforce Development Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Workforce Development Day ∎ Tuesday, October 22, 2013 Nuclear Medicine Topics:  Pathways of Practice in Nuclear Medicine  Radiopharmacy  Patient Care  Medical Imaging & Computers Moderator: Deborah M. Gibbs, MEd, PET, CNMT Lead Nuclear Medicine / PET Facility Administrator Georgia Regents University Panel Members: Jim Corley, MS, RPh- Associate Professor Georgia Regents University George David, MS, FAAPM- Medical Physicist Georgia Regents University Dr. Gregory

  19. The early days of incineration

    SciTech Connect (OSTI)

    Valenti, M.

    1995-05-01

    Landfills reaching capacity, beaches fouled with trash, neighborhood residents protesting waste disposal sites in their backyards, and municipalities forced to recycle. Sound familiar? These issues might have been taken from today`s headlines, but they were also problems facing mechanical engineers a century ago. Conditions such as these were what led engineers to design the first incinerators for reducing the volume of municipal garbage, as well as for producing heat and electricity. The paper discusses these early days.

  20. Born on Pearl Harbor Day, and destined fo

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on Pearl Harbor Day, and destined for a career in the Navy, Rear Admiral John Mitchell's early life was spent in West Texas and New Mexico. He graduated from Rice University in 1964 with degrees in math and electrical engineering and immediately entered the Navy through the Navy ROTC program. During his 30-year career in the Navy, Mitchell earned a master's degree in physics at the Naval Post Graduate School, served at sea and in shipyards, and spent 18 years in the Strategic Systems Program

  1. Neutrino Physics AAPT Strand Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics AAPT Strand Day NSTA Regional, 2005 Jocelyn Monroe, Columbia University 1. What Is a Neutrino Anyway? 2. The Question Of Neutrino Mass 3. Searching For Neutrino Oscillations 4. Where Are We Now? ν Neutrinos, they are very small. They have no charge and have no mass And do not interact at all. The earth is just a silly ball To them, through which they simply pass... ...And pierce the lover and his lass From underneath the bed- you call It wonderful; I call it crass. J from ``Cosmic

  2. Precursor composites for oxygen dispersion hardened silver sheathed superconductor composites

    DOE Patents [OSTI]

    Podtburg, Eric R.

    1999-01-01

    An oxide superconductor composite having improved texture and durability. The oxide superconductor composite includes an oxide superconductor phase substantially surrounded with/by a noble metal matrix, the noble metal matrix comprising a metal oxide in an amount effective to form metal oxide domains that increase hardness of the composite. The composite is characterized by a degree of texture at least 10% greater than a comparable oxide superconductor composite lacking metal oxide domains. An oxide superconducting composite may be prepared by oxidizing the precursor composite under conditions effective to form solute metal oxide domains within the silver matrix and to form a precursor oxide in the precursor alloy phase; subjecting the oxidized composite to a softening anneal under conditions effective to relieve stress within the noble metal phase; and converting the oxide precursor into an oxide superconductor.

  3. Precursor composites for oxygen dispersion hardened silver sheathed superconductor composites

    DOE Patents [OSTI]

    Podtburg, E.R.

    1999-06-22

    An oxide superconductor composite having improved texture and durability is disclosed. The oxide superconductor composite includes an oxide superconductor phase substantially surrounded with/by a noble metal matrix, the noble metal matrix comprising a metal oxide in an amount effective to form metal oxide domains that increase hardness of the composite. The composite is characterized by a degree of texture at least 10% greater than a comparable oxide superconductor composite lacking metal oxide domains. An oxide superconducting composite may be prepared by oxidizing the precursor composite under conditions effective to form solute metal oxide domains within the silver matrix and to form a precursor oxide in the precursor alloy phase; subjecting the oxidized composite to a softening anneal under conditions effective to relieve stress within the noble metal phase; and converting the oxide precursor into an oxide superconductor. 1 fig.

  4. Celebrate Earth Day! | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Savers Facebook pages, our Earth Day poll provides another opportunity for you to interact with us. Log on to our Earth Day Web site and tell us how you'll recognize Earth Day,...

  5. CEMI Days Factsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CEMI Days Factsheet CEMI Days Factsheet CEMI Days factsheet.pdf (507.22 KB) More Documents & Publications Introduction to CEMI Fact Sheet Amped Up! Volume 1, No.2 CEMI Southeast Regional Summit Agenda

  6. Earth Day Coalition | Open Energy Information

    Open Energy Info (EERE)

    Day Coalition Jump to: navigation, search Name: Earth Day Coalition Address: 3606 Bridge Avenue, Suite 4 Place: Cleveland, Ohio Zip: 44113 Coordinates: 41.4829135, -81.7117416...

  7. MDM Tech Day Presentation | Department of Energy

    Energy Savers [EERE]

    MDM Tech Day Presentation MDM Tech Day Presentation More Documents & Publications Slide 1 Microsoft Word - MRContingencyProtocolEMFINAL.docx UPF R&OM Management...

  8. Lens positioner with five degrees of freedom

    DOE Patents [OSTI]

    Kobierecki, Marian W.; Rienecker, Jr., Frederick

    1978-01-01

    A device for positioning lenses precisely with five degrees of freedom (three translations and two angular rotations). The unique features of the device are its compact design, large clear aperture, and high degree of positioning accuracy combined with five degrees of freedom in axis motion. Thus, the device provides precision and flexibility in positioning of optical components. BACKGROUND OF THE INVENTION The invention described herein was made in the course of, or under, Contract No. AT(29-1)-1183, with the United States Energy Research and Development Administration.

  9. EM Leaders Earn National Defense Degrees

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – Two EM employees were recently awarded Master of Science degrees from the National Defense University (NDU) as part of a DOE-sponsored professional development program.

  10. Sintered composite medium and filter

    DOE Patents [OSTI]

    Bergman, Werner

    1987-01-01

    A particulate filter medium is formed of a sintered composite of 0.5 micron diameter quartz fibers and 2 micron diameter stainless steel fibers. A preferred composition is about 40 vol. % quartz and about 60 vol. % stainless steel fibers. The media is sintered at about 1100.degree. C. to bond the stainless steel fibers into a cage network which holds the quartz fibers. High filter efficiency and low flow resistance are provided by the smaller quartz fibers. High strength is provided by the stainless steel fibers. The resulting media has a high efficiency and low pressure drop similar to the standard HEPA media, with tensile strength at least four times greater, and a maximum operating temperature of about 550.degree. C. The invention also includes methods to form the composite media and a HEPA filter utilizing the composite media. The filter media can be used to filter particles in both liquids and gases.

  11. Take Our Daughters to Work Day 2016

    Broader source: Energy.gov [DOE]

    April 28 was Take Our Daughters and Sons to Work Day. At the U.S. Department of Energy, proud parents brought their children to participate in a day full of activities.

  12. DOE Co-Spnsors Earth Day Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE Co-Sponsors Earth Day Activities Free trees and native plants are available to the first participants at the Idaho Falls Earth Day festivities in Tautphaus Park. There are a...

  13. Earth Day 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This year, we're celebrating Earth Day all week long. It's Earth Week on Energy.gov We're focusing on climate change, highlighting Earth Day events and sharing ways Americans ...

  14. I/O Statistics Last 30 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Last 30 Days These plots show the daily statistics for the last 30 days for the storage systems at NERSC in terms of the amount of data transferred and the number of files...

  15. Method of making carbon-carbon composites

    DOE Patents [OSTI]

    Engle, Glen B.

    1991-01-01

    A process for making a carbon-carbon composite having a combination of high crystallinity, high strength, high modulus and high thermal and electrical conductivity. High-modulus/high-strength mesophase derived carbon fibers are woven into a suitable cloth. Layers of this easily graphitizable woven cloth are covered with petroleum or coal tar pitch and pressed at a temperature a few degrees above the softening point of the pitch to form a green laminated composite. The green composite is restrained in a suitable fixture and heated slowly to carbonize the pitch binder. The carbonized composite is then impregnated several times with pitch by covering the composite with hot pitch under pressure. The composites are given a heat treatment between each impregnation step to crack up the infiltrated carbon and allow additional pitch to enter the microstructure during the next impregnation cycle. The impregnated composites are then given a final heat treatment in the range 2500.degree. to 3000.degree. C. to fully graphitize the fibers and the matrix carbon. The composites are then infiltrated with pyrolytic carbon by chemical vapor deposition in the range 1000.degree. to 1300.degree. C. at a reduced pressure for approximately one hundred and fifty (150) hours.

  16. National Day of Remembrance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Remembrance National Day of Remembrance December 10, 2014 - 11:56am Addthis Mr. David Klaus, Deputy Under Secretary for Management and Performance, speaking at the October 31, 2014 National Remembrance Day event. Mr. David Klaus, Deputy Under Secretary for Management and Performance, speaking at the October 31, 2014 National Remembrance Day event. On July 9, 2014, the U.S. Senate announced the passage of S. Res. 417, a Senate resolution designating October 30, 2014, as a National Day of

  17. National Alternative Vehicle (AFV) Day Odyssey

    Office of Energy Efficiency and Renewable Energy (EERE)

    National Alternative Fuel Vehicle (AFV) Day Odyssey is a biennial event dedicated to promoting cleaner choices in transportation.

  18. Innovative Manufacturing Initiatives Recognition Day Agenda ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovative Manufacturing Initiatives Recognition Day Agenda imirecogitiondayagenda.pdf (76.67 KB) More Documents & Publications Innovative Manufacturing Initiative Recognition ...

  19. I/O Statistics Last 30 Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I/O Statistics Last 30 Days I/O Statistics Last 30 Days These plots show the daily statistics for the last 30 days for the storage systems at NERSC in terms of the amount of data transferred and the number of files transferred. Daily I/O Volume Daily I/O Count

  20. Electrocatalyst compositions

    DOE Patents [OSTI]

    Mallouk, Thomas E.; Chan, Benny C.; Reddington, Erik; Sapienza, Anthony; Chen, Guoying; Smotkin, Eugene; Gurau, Bogdan; Viswanathan, Rameshkrishnan; Liu, Renxuan

    2001-09-04

    Compositions for use as catalysts in electrochemical reactions are described. The compositions are alloys prepared from two or more elemental metals selected from platinum, molybdenum, osmium, ruthenium, rhodium, and iridium. Also described are electrode compositions including such alloys and electrochemical reaction devices including such catalysts.

  1. Molybdenum sealing glass-ceramic composition

    DOE Patents [OSTI]

    Eagan, Robert J.

    1976-01-01

    The invention relates to a glass-ceramic composition having low hydrogen and helium permeability properties, along with high fracture strength, a thermal coefficient of expansion similar to that of molybdenum, and adaptable for hermetically sealing to molybdenum at temperatures of between about 900.degree. and about 950.degree.C. to form a hermatically sealed insulator body.

  2. Sustainable Transportation Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sustainable Transportation Day Sustainable Transportation Day June 22, 2015 11:00AM to 5:00PM EDT U.S. Department of Energy 1000 Independence Ave., SW Washington, D.C. 20585 Join us for Sustainable Transportation Day, an afternoon on the grounds of the Forrestal Building in Washington D.C., with U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewabel Energy's (EERE's) Bioenergy Technologies Office, Fuel Cell Technologies Office, and Vehicle Technologies Office. Mingle with

  3. Local Students Celebrate Earth Day at NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Students Celebrate Earth Day at NREL For more information contact: e:mail: Public Affairs Golden, Colo., April 17, 1998 — Media are invited to cover Earth Day celebration designed to inspire a new generation of scientists to discover better ways of using our natural resources. What: The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) will host an Earth Day celebration for 60 elementary students. Hands-on activities will include building model solar cars and

  4. Educate yourself about stewardship this Earth Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Educate yourself about stewardship this Earth Day Educate yourself about stewardship this Earth Day WHEN: Apr 20, 2016 12:00 PM - 2:00 PM WHERE: Bradbury Science Museum 1350 Central Ave, Los Alamos, NM 87544, USA CONTACT: Linda Anderman (505) 665-9196 CATEGORY: Bradbury INTERNAL: Calendar Login Event Description Earth Day open house Open House at the Bradbury Science Museum hosted by the Lab's Environmental Protection & Compliance-Environmental Stewardship resources team. Laboratory

  5. 2016 Postdoc Research Day Presentation Slides (Conference) |...

    Office of Scientific and Technical Information (OSTI)

    Resource Relation: Conference: 2016 Postdoc Research Day ; 2016-05-19 - 2016-05-19 ; Los Alamos, New Mexico, United States Research Org: Los Alamos National Laboratory (LANL) ...

  6. Innovative Manufacturing Initiative Recognition Day, Advanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry

  7. Smithsonian's Museum Day at Bradbury Science Museum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to Smithsonian magazine subscribers and Smithsonian.com visitors. A celebration of culture, learning, and the dissemination of knowledge, Museum Day follows the free-admission...

  8. National Hydrogen and Fuel Cell Day

    Office of Energy Efficiency and Renewable Energy (EERE)

    Join us on Thursday, October 8, in celebrating the first National Hydrogen and Fuel Cell Day! In 2013, auto manufacturers started announcing fuel cell electric vehicle (FCEV) commercialization...

  9. 4th Day Energy | Open Energy Information

    Open Energy Info (EERE)

    in residential and commercial solar electric system installations. State-of-the-art photovoltaics (PV) are used for solar energy production3. References 4th Day Energy...

  10. 2014 Brayton Cycle Workshop and Industry Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brayton Cycle Workshop and Industry Day - Sandia Energy Energy Search Icon ... Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal ...

  11. Optima Stakeholder Listening Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    from industry and other important stakeholders, work to accelerate the concurrent ... BETO and VTO designed the Listening Day to obtain guidance from diverse stakeholders. ...

  12. Smithsonian's Museum Day at Bradbury Science Museum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Museum Day is when museums and cultural institutions across the nation open their doors free of charge to Smithsonian magazine subscribers and Smithsonian.com visitors. September...

  13. Leverage Earth Day to Promote Energy Efficiency

    Broader source: Energy.gov [DOE]

    Learn how to leverage Earth Day and other holidays by visiting the Better Buildings Residential Program Solution Center for helpful peer exchange call summaries and case studies:

  14. All Day Solar | Open Energy Information

    Open Energy Info (EERE)

    stage company planning to manufacture flexible thin-film PV modules for vehicular rooftop applications. References: All Day Solar1 This article is a stub. You can help...

  15. Diagnostic compositions

    SciTech Connect (OSTI)

    Burch, W.M.

    1981-07-28

    The invention discloses diagnostic compositions for use in obtaining images of a patient's lungs. The basic components of the composition of the invention are sodium pertechnetate which is radioactive and ethanol. This composition may be combusted and the resulting products cooled or alternatively the composition may be inserted into a pressure vessel with an aerosol. In both cases a gas like mixture results. A particular advantage is that a patient is able to breath the mixture of the invention in a normal way and does not need to undergo any training in inhalation.

  16. Energetic composites

    DOE Patents [OSTI]

    Danen, W.C.; Martin, J.A.

    1993-11-30

    A method for providing chemical energy and energetic compositions of matter consisting of thin layers of substances which will exothermically react with one another. The layers of reactive substances are separated by thin layers of a buffer material which prevents the reactions from taking place until the desired time. The reactions are triggered by an external agent, such as mechanical stress or an electric spark. The compositions are known as metastable interstitial composites (MICs). This class of compositions includes materials which have not previously been capable of use as energetic materials. The speed and products of the reactions can be varied to suit the application. 3 figures.

  17. Elf well turns 90/degree/- and stays there

    SciTech Connect (OSTI)

    Astier, B.; Jourdan, A.; Baron, G.

    1981-01-01

    As part of an intensive research program, the French association IFP (Institut Francais du Petrole) and Elf-Aquitaine have drilled the first European horizontal hole. The well was spudded conventionally and then deviated so that its final path was horizontal, 2,198 ft (670 m) below the surface. More than 330 ft (100 m) were drilled between 89/degree/ and 92/degree/ of inclination. The project started with reservoir engineering studies aimed at demonstrating, on mathematical models, the effectiveness of a horizontal drain hole in areas where hydrocarbon recovery is poor or unsatisfactory, due to gas or water coning, poor flooding patterns, intersection of fractures in tight but fractured producing formations, or other causes. This technique has a number of potential applications both in and out of the oil industry. The well was drilled in 44 days. Horizontal displacement was 2,192 ft (668 m) with a total vertical depth of 2,198 ft (670 m). To accomplish this, it was necessary to drill 3,563 ft (1,086 m) of hole. In the 17/one-half/-in. hole, 73/4-in. drill collars and 5-in. heavy weight drill pipe were run above the bent sub and the monel collar. While reaming the hole, the drill string was rotated conventionally, one near bit and one stabilizer (30 ft above) being included in the string.

  18. Silicon-nitride and metal composite

    DOE Patents [OSTI]

    Landingham, Richard L.; Huffsmith, Sarah A.

    1981-01-01

    A composite and a method for bonding the composite. The composite includes a ceramic portion of silicon nitride, a refractory metal portion and a layer of MoSi.sub.2 indirectly bonding the composite together. The method includes contacting the layer of MoSi.sub.2 with a surface of the silicon nitride and with a surface of the metal; heating the layer to a temperature below 1400.degree. C.; and, simultaneously with the heating, compressing the layer such that the contacting is with a pressure of at least 30 MPa. This composite overcomes useful life problems in the fabrication of parts for a helical expander for use in power generation.

  19. Demonstration and Deployment Workshop Day 2 - Thermochem | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Day 2 - Thermochem Demonstration and Deployment Workshop Day 2 - Thermochem Day 2 Report - ... More Documents & Publications Demonstration and Deployment Workshop - Day 1 Report Out ...

  20. Electrode compositions

    DOE Patents [OSTI]

    Block, J.; Fan, X.

    1998-10-27

    An electrode composition is described for use as an electrode in a non-aqueous battery system. The electrode composition contains an electrically active powder in a solid polymer and, as a dispersant, a C{sub 8}-C{sub 15} alkyl capped oligomer of a hexanoic acid that is electrochemically inert at 2.5--4.5 volts.

  1. Electrode compositions

    DOE Patents [OSTI]

    Block, Jacob (Rockville, MD); Fan, Xiyun (Orange, TX)

    1998-01-01

    An electrode composition for use as an electrode in a non-aqueous battery system. The electrode composition contains an electrically active powder in a solid polymer and, as a dispersant, a C.sub.8 -C.sub.15 alkyl capped oligomer of a hexanoic acid that is electrochemically inert at 2.5-4.5 volts.

  2. Mass spectrometers for studying the ionic and neutral composition of the upper layers of the atmosphere

    SciTech Connect (OSTI)

    Shutov, M.D.

    1984-04-01

    The investigation of the ionic and neutral composition of the upper layers of the atmosphere and outer space which is of interest for solving theoretical and applied problems of astrophysics, geophysics, space biology, and other closely-tied areas of science is discussed. The upper layers of the atmosphere are of practical significance for launching rockets and artificial satellites, for which the nature of movement depends on the structure and composition of the atmosphere. The study of the chemical composition of the ionosphere, the degree of ionization of the upper layers of the atmosphere at different latitudes and different times of day, and the dependence of ionization on the action of ultraviolet and corpuscular radiation is necessary to study the processes of the propagation of radio waves, and to explain the chemical and photochemical reaction which cause the ionosphere to exist. The most modern methods of study the composition of the mass spectral method which is a direct method and is especially valuable at great altitudes to study the composition of the upper atmosphere is considered. The mass spectrometric method is the only one to analyze the composition of ionizing gases.

  3. Smart Manufacturing Institute Industry Day Workshop | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Process Intensification Workshop - September 29-30, 2015 WORKSHOP: HIGH VALUE ROLL TO ROLL (HV R2R) MANUFACTURING INNOVATION, DECEMBER 2-3, 2015 Fiber Reinforced Polymer Composite ...

  4. Volunteer Day | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Volunteer Day Volunteer Day Posted: February 11, 2013 - 3:48pm | Y-12 Report | Volume 9, Issue 2 | 2013 For 10 years, Y-12 employees and their friends and family members have donated lots of sweat equity and talent to improve their communities through an annual Day of Volunteering. From caring for llamas to sprucing up playgrounds and picnic areas to stocking donated food items, employees are willing to roll up their T-shirt sleeves and lend a hand. Libraries, animal shelters, food pantries,

  5. Development and Implementation of Degree Programs in Electric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Documents & Publications Development and Implementation of Degree Programs in Electric Drive Vehicle Technology Development and Implementation of Degree Programs in Electric Drive...

  6. Development and Implementation of Degree Programs in Electric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development and Implementation of Degree Programs in Electric Drive Vehicle Technology Development and Implementation of Degree Programs in Electric Drive Vehicle Technology Asia...

  7. Development and Implementation of Degree Programs in Electric...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Development and Implementation of Degree Programs in Electric Drive Vehicle Technology Development and Implementation of Degree Programs in Electric ...

  8. Vice President Biden Kicks Off Five Days of Earth Day Activities with

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Announcement of Major New Energy Efficiency Effort | Department of Energy Kicks Off Five Days of Earth Day Activities with Announcement of Major New Energy Efficiency Effort Vice President Biden Kicks Off Five Days of Earth Day Activities with Announcement of Major New Energy Efficiency Effort April 21, 2010 - 12:00am Addthis Washington, D.C. -- Vice President Biden will today kick off five days of Administration events around the 40th anniversary of Earth Day with the announcement of the

  9. Co-Optima Stakeholder Listening Day

    Broader source: Energy.gov [DOE]

    he Department of Energy’s Bioenergy Technologies and Vehicle Technologies Offices (BETO and VTO) are co-hosting a stakeholder Listening Day to help shape a major new Sustainable Transportation initiative: Co-optimization of Fuels and Engines (Optima).

  10. National Manufacturing Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    anticipated 400,000 people who want to experience U.S. manufacturing up close and in person. On October 2, the U.S. Department of Commerce's fourth annual Manufacturing Day will...

  11. Day4Energy Inc | Open Energy Information

    Open Energy Info (EERE)

    Day4Energy Inc Place: Burnaby, British Columbia, Canada Zip: BC V5G 4X4 Product: Manufactures modules using crystalline silicon PV cells and a patented back-contact method, the...

  12. Demo Day | OpenEI Community

    Open Energy Info (EERE)

    is coming to a close. On May 14, 17 finalists will showcase their innovative ideas at the Demo Day event in San Francisco. To register and learn more about the event click here...

  13. National Laboratories Recruiting Day" at Howard University |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Laboratories Recruiting Day" at Howard University February 4, 2016 11:00AM to 6:00PM EST Howard University, School of Engineering, Architecture and Computer Sciences....

  14. Inter-Agency Holocaust Remberance Day

    Broader source: Energy.gov [DOE]

    The ‘Days of Remembrance’ honors the six million Jews who were murdered during the Holocaust, and the five million other victims including Soviet prisoners of war, Polish Christians, physically and...

  15. Lab joins in global Earth Day celebrations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab joins in global Earth Day celebrations Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Lab joins in global Earth Day celebrations A personal message from Laboratory Director Charlie McMillan April 1, 2014 Charlie McMillan, Laboratory Director Charlie McMillan, Laboratory Director Contacts Community Programs Office Director Kurt Steinhaus Email Editor Linda Anderman Email Los Alamos

  16. 2016 - Nano Days | MIT-Harvard Center for Excitonics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nano Days 5.26.2016 Nano Days - April 2, 2016

  17. Earth Day 2012: A Day to Remember the Past and Shape the Future

    Broader source: Energy.gov [DOE]

    On Earth Day 2012, one man contemplates the history of conservationism and environmentalism in the United States - and the world.

  18. Hydride compositions

    DOE Patents [OSTI]

    Lee, Myung, W.

    1994-01-01

    Disclosed are a composition for use in storing hydrogen and a method for making the composition. The composition comprises a mixture of two or more hydrides, each hydride having a different series of hydrogen sorption isotherms that contribute to the overall isotherms of the mixture. The hydrides are chosen so that the isotherms of the mixture have regions wherein the H equilibrium pressure increases with increasing hydrogen, preferably linearly. The isotherms of the mixture can be adjusted by selecting hydrides with different isotherms and by varying the amounts of the individual hydrides, or both. Preferably, the mixture is made up of hydrides that have isotherms with substantially flat plateaus and in nearly equimolar amounts. The composition is activated by degassing, exposing to H, and then heating below the softening temperature of any of the constituents. When the composition is used to store hydrogen, its hydrogen content can be found simply by measuring P{sub H}{sub 2} and determining H/M from the isothermic function of the composition.

  19. Hydride compositions

    DOE Patents [OSTI]

    Lee, Myung W.

    1995-01-01

    A composition for use in storing hydrogen, and a method for making the composition. The composition comprises a mixture of two or more hydrides, each hydride having a different series of hydrogen sorption isotherms that contribute to the overall isotherms of the mixture. The hydrides are chosen so that the isotherms of the mixture have regions wherein the hydrogen equilibrium pressure increases with increasing hydrogen, preferably linearly. The isotherms of the mixture can be adjusted by selecting hydrides with different isotherms and by varying the amounts of the individual hydrides, or both. Preferably, the mixture is made up of hydrides that have isotherms with substantially flat plateaus and in nearly equimolar amounts. The composition is activated by degassing, exposing to hydrogen and then heating at a temperature below the softening temperature of any of the. constituents so that their chemical and structural integrity is preserved. When the composition is used to store hydrogen, its hydrogen content can be found simply by measuring P.sub.H.sbsb.2 and determining H/M from the isothermic function of the composition.

  20. Energy Industry Days- Performance Contracting- Sacramento, CA

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy is hosting several Energy Industry Day events to promote and publicize opportunities for small businesses seeking to meet DOE support requirements. Opportunities will be available for attendees to learn of potential partnerships with prime and subcontracting companies. These Energy Industry Day events would both support the agency's commitment to DOE's "Small Business First Policy" and would provide dedicated sessions that introduce Energy Service Companies (ESCOs) and other prime contract holders with small business.

  1. High specific heat superconducting composite

    DOE Patents [OSTI]

    Steyert, Jr., William A.

    1979-01-01

    A composite superconductor formed from a high specific heat ceramic such as gadolinium oxide or gadolinium-aluminum oxide and a conventional metal conductor such as copper or aluminum which are insolubly mixed together to provide adiabatic stability in a superconducting mode of operation. The addition of a few percent of insoluble gadolinium-aluminum oxide powder or gadolinium oxide powder to copper, increases the measured specific heat of the composite by one to two orders of magnitude below the 5.degree. K. level while maintaining the high thermal and electrical conductivity of the conventional metal conductor.

  2. 30-Day Federal Register Notice - Extension | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    30-Day Federal Register Notice - Extension 30-Day Federal Register Notice - Extension Record Extension-30 Day Federal Register Notice 30-Day Federal Register Notice - Extension (57.73 KB) More Documents & Publications 30 Day Federal Register Notice Extension - FINAL 30-Day Federal Register Notice - Proposed 30 Day Federal Register Notice Proposed - FINAL

  3. Interdiffusion and Reaction between Zr and Al Alloys from 425 degrees to 625 degrees C

    SciTech Connect (OSTI)

    J. Dickson; L. Zhou; A. Ewh; M. Fu; D. D. Keiser, Jr.; Y. H. Sohn; A. Paz y Puente

    2014-06-01

    Zirconium has recently garnered attention for use as a diffusion barrier between UMo nuclear fuels and Al cladding alloys. Interdiffusion and reactions between Zr and Al, Al-2 wt.% Si, Al-5 wt.% Si or AA6061 were investigated using solid-to-solid diffusion couples annealed in the temperature range of 425 degrees to 625 degrees C. In the binary Al and Zr system, the Al3Zr and Al2Zr phases were identified, and the activation energy for the growth of the Al3Zr phase was determined to be 347 kJ/mol. Negligible diffusional interactions were observed for diffusion couples between Zr vs. Al-2 wt.% Si, Al-5 wt.% Si and AA6061 annealed at or below 475 degrees C. In diffusion couples with the binary AlSi alloys at 560 degrees C, a significant variation in the development of the phase constituents was observed including the thick t1 (Al5SiZr2) with Si content up to 12 at.%, and thin layers of (Si,Al)2Zr, (Al,Si)3Zr, Al3SiZr2 and Al2Zr phases. The use of AA6061 as a terminal alloy resulted in the development of both T1 (Al5SiZr2) and (Al,Si)3Zr phases with a very thin layer of (Al,Si)2Zr. At 560 degrees C, with increasing Si content in the AlSi alloy, an increase in the overall rate of diffusional interaction was observed; however, the diffusional interaction of Zr in contact with multicomponent AA6061 with 0.40.8 wt.% Si was most rapid.

  4. Multiple-degree-of-freedom vehicle

    DOE Patents [OSTI]

    Borenstein, Johann

    1995-01-01

    A multi-degree-of-freedom vehicle employs a compliant linkage to accommodate the need for a variation in the distance between drive wheels or drive systems which are independently steerable and drivable. The subject vehicle is provided with rotary encodes to provide signals representative of the orientation of the steering pivot associated with each such drive wheel or system, and a linear encoder which issues a signal representative of the fluctuations in the distance between the drive elements. The wheels of the vehicle are steered and driven in response to the linear encoder signal, there being provided a controller system for minimizing the fluctuations in the distance. The controller system is a software implementation of a plurality of controllers, operating at the chassis level and at the vehicle level. A trajectory interpolator receives x-displacement, y-displacement, and .theta.-displacement signals and produces to the vehicle level controller trajectory signals corresponding to interpolated control signals. The x-displacement, y-displacement, and .theta.-displacement signals are received from a human operator, via a manipulable joy stick.

  5. Smart Manufacturing Institute Industry Day Workshop Proceedings

    Office of Energy Efficiency and Renewable Energy (EERE)

    AMO hosted an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute on Smart Manufacturing. The workshop was held on February 25, 2015 at the Georgia Tech Hotel & Conference Center in Atlanta, GA.

  6. Smart Manufacturing Institute Industry Day Workshop

    Broader source: Energy.gov [DOE]

    AMO hosted an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute on Smart Manufacturing. The workshop was held on February 25, 2015 at the Georgia Tech Hotel & Conference Center in Atlanta, GA.

  7. Photoimageable composition

    DOE Patents [OSTI]

    Simison, Kelby Liv; Dentinger, Paul

    2003-11-11

    The use of selected buffering amines in a photoimageable composition prevents process bias which with conventional photoresists causes designed features to be distorted, especially in corners and high resolution features. It is believed that the amines react with the catalysts, e.g., photoacids, generated to create an inert salt. The presence of the amines also increases resolution. Suitable photoimageable compositions includes: (a) a multifunctional polymeric epoxy resin that is dissolved in an organic solvent wherein the epoxy resin comprises oligomers of bisphenol A that is quantitatively protected by glycidyl ether and wherein the oligomers have an average functionality that ranges from about 3 to 12; (b) a photoactive compound; and (c) an amine that is selected from the group consisting of triisobutylamine, 1,8-bis(dimethylamino)naphthalene (also known as PROTON SPONGET.TM.), 2,2'-diazabicyclo[2.2.2] octane and mixtures thereof. The photoimageable composition is particularly suited for producing high aspect ratio metal microstructures.

  8. Photoimageable composition

    DOE Patents [OSTI]

    Dentinger, Paul; Krafick, Karen L.; Simison, Kelby Liv

    2005-02-22

    The use of photoacid generators including an alkoxyphenylphenyliodonium salt and/or bis(t-butylphenyl)iodonium salt in a photoimageable composition helps improve resolution. Suitable photoimageable compositions includes: (a) a multifuctional polymeric epoxy resin that is dissolved in an organic solvent wherein the epoxy resin comprises oligomers of bisphenol A that is quantitatively protected by glycidyl ether and wherein the oligomers have an average functionality that ranges from about 3 to 12; and a photoacid generator comprising an alkoxyphenylphenyliodonium salt and/or bis(t-butylphenyl)iodonium salt. Preferred alkoxyphenylphenyliodonium salts include 4-octyloxyphenyl phenyliodonium hexafluoroantimonate and 4-methoxyphenyl phenyliodonium hexafluoroantimonate. The photoimageable composition is particularly suited for producing high aspect ratio microstructures.

  9. Composite material

    DOE Patents [OSTI]

    Hutchens, Stacy A.; Woodward, Jonathan; Evans, Barbara R.; O'Neill, Hugh M.

    2012-02-07

    A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

  10. Polymer compositions based on PXE

    DOE Patents [OSTI]

    Yang, Jin; Eitouni, Hany Basam; Singh, Mohit

    2015-09-15

    New polymer compositions based on poly(2,6-dimethyl-1,4-phenylene oxide) and other high-softening-temperature polymers are disclosed. These materials have a microphase domain structure that has an ionically-conductive phase and a phase with good mechanical strength and a high softening temperature. In one arrangement, the structural block has a softening temperature of about 210.degree. C. These materials can be made with either homopolymers or with block copolymers.

  11. COMPOSITE ELEMENT

    DOE Patents [OSTI]

    Schaner, B.E.; Wolfe, R.A.

    1962-12-18

    Composite fuel eiements of the sandwich type are reported. The invention resides in the use of a layer of graphite on the interfaces of the flssile material and the cladding to prevent interdiffusion of the fissile material and the ciadding material. (AEC)

  12. Phosphorescent compositions, methods of making the compositions, and methods of using the compositions

    SciTech Connect (OSTI)

    Jia, Weiyi; Wang, Xiaojun; Yen, William; Yen, Laurel C.; Jia, George D.

    2012-12-04

    Compositions, methods of making compositions, materials including compositions, crayons including compositions, paint including compositions, ink including compositions, waxes including compositions, polymers including compositions, vesicles including the compositions, methods of making each, and the like are disclosed.

  13. Phosphorescent compositions, methods of making the compositions, and methods of using the compositions

    SciTech Connect (OSTI)

    Jia, Weiyi; Wang, Xiaojun; Jia, George D.; Lewis, Linda; Yen, Laurel C.

    2014-06-24

    Compositions, methods of making compositions, materials including compositions, crayons including compositions, paint including compositions, ink including compositions, waxes including compositions, polymers including compositions, vesicles including the compositions, methods of making each, and the like are disclosed.

  14. 30-Day Federal Register Notice - Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Revised 11-2009 30-Day Federal Register Notice - Proposed [6450-01-P] DEPARTMENT OF ENERGY Proposed Agency Information Collection AGENCY: U.S. Department of Energy. ACTION: Notice and Request for OMB Review and Comment SUMMARY: The Department of Energy (DOE) has submitted to the Office of Management and Budget (OMB) for clearance, a proposal for collection of information under the provisions of the Paperwork Reduction Act of 1995. The proposed collection will {enter a brief description of the

  15. What is a High Electric Demand Day?

    Broader source: Energy.gov [DOE]

    This presentation by T. McNevin of the New Jersey Bureau of Air Quality Planning was part of the July 2008 Webcast sponsored by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Weatherization and Intergovernmental Program Clean Energy and Air Quality Integration Initiative that was titled Role of Energy Efficiency and Renewable Energy in Improving Air Quality and Addressing Greenhouse Gas Reduction Goals on High Electric Demand Days.

  16. Minimum Day Time Load Calculation and Screening

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Minimum Daytime Load Calculation and Screening Page 1 of 30 Kristen Ardani, Dora Nakfuji, Anthony Hong, and Babak Enayati Page 1 of 30 [Speaker: Kristen Ardani] Cover Slide: Thank you everyone for joining us today for our DG interconnection collaborative informational webinar. Today we are going to talk about minimum day time load calculation and screening procedures and their role in the distributed PV interconnection process. We're going to hear from Babak Enayati of the Massachusetts

  17. Minimum Day Time Load Calculation and Screening

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Minimum Day Time Load Calculation and Screening" Dora Nakafuji and Anthony Hong, Hawaiian Electric Co. Babak Enayati, DG Techincal Standards Review Group April 30, 2014 2 Speakers Babak Enayati Chair of Massachusetts DG Technical Standards Review Group Dora Nakafuji Director of Renewable Energy Planning Hawaiian Electric Company (HECO) Kristen Ardani Solar Analyst, (today's moderator) NREL Anthony Hong Director of Distribution Planning Hawaiian Electric Company (HECO) Standardization of

  18. Career Day Entertainment Pleading Your Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Day Entertainment Pleading Your Case NvE experts share their knowledge with students. Ken Walker comes on-board to manage the new MAS directorate. Irwin coaches future lawyers in competition. See page 6. See page 5. Aerial Exercise Prepares Agencies to Respond to Rad/Nuc Emergencies It was a first for the National Nuclear Security Administration (NNSA) and the Nevada National Security Site (NNSS). The WINGS emergency response exercise, held at the NNSS's Desert Rock Airport March 25, brought

  19. 30-Day Federal Register Notice - Extension

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    30-Day Federal Register Notice - Extension [6450-01-P] DEPARTMENT OF ENERGY Agency Information Collection Extension AGENCY: U.S. Department of Energy. ACTION: Submission for Office of Management and Budget (OMB) review; comment request SUMMARY: The Department of Energy (DOE) has submitted an information collection request to the OMB for extension under the provisions of the Paperwork Reduction Act of 1995. The information collection requests a three-year extension of its {enter the Title of the

  20. 30-Day Federal Register Notice - Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    30-Day Federal Register Notice - Proposed [6450-01-P] DEPARTMENT OF ENERGY Proposed Agency Information Collection AGENCY: U.S. Department of Energy. ACTION: Notice and Request for OMB Review and Comment SUMMARY: The Department of Energy (DOE) has submitted to the Office of Management and Budget (OMB) for clearance, a proposal for collection of information under the provisions of the Paperwork Reduction Act of 1995. The proposed collection will {enter a brief description of the collection that

  1. Minimum Day Time Load Calculation and Screening

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Distributed Generation Interconnection Collaborative (DGIC) "Minimum Day Time Load Calculation and Screening" Dora Nakafuji and Anthony Hong, Hawaiian Electric Co. Babak Enayati, DG Techincal Standards Review Group April 30, 2014 2 Speakers Babak Enayati Chair of Massachusetts DG Technical Standards Review Group Dora Nakafuji Director of Renewable Energy Planning Hawaiian Electric Company (HECO) Kristen Ardani Solar Analyst, (today's moderator) NREL Anthony Hong Director of

  2. Earth Day Celebration at Nationals Park

    Broader source: Energy.gov [DOE]

    As a part of the Earth Day celebration, Deputy Secretary Elizabeth Sherwood-Randall will represent DOE during the pregame acknowledgements and Presidents Race at Nationals Park on Friday, April 22, when the Nationals play the Minnesota Twins beginning at 7:05 p.m. The Sustainability Performance Office (SPO) is assisting with this "Celebration of Sustainability" to have some fun while promoting workplace sustainability to staff and citizens.

  3. 2013 National Nuclear Science Week Education Days

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Nuclear Science Week Education Days Monday, October 21 - Friday, October 25, 2013 Ruth Patrick Science Education Center (RPSEC) - USC Aiken, SC Programs: Journey to the Center of the Atom ∎ Chemical Matters ∎ Probing the Periodic Table Teachers can make arrangements for class participation through http://rpsec.usca.edu Tuesday, October 22, 2013 Ruth Patrick Science Education Center (RPSEC) - USC Aiken, SC Webinar: Journey to the Center of the Atom (11:30 am) Register

  4. How Are You Celebrating Earth Day This Year? | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Day This Year? How Are You Celebrating Earth Day This Year? April 21, 2011 - 7:30am Addthis Tomorrow is Earth Day We've already written about how you can resolve to make Earth Day ...

  5. ORISE: Report shows number of health physics degrees for 2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    report shows number of health physics degrees increased for graduates, decreased for undergraduates in 2010 Decreased number of B.S. degrees remains higher than levels in the early 2000 FOR IMMEDIATE RELEASE Dec. 20, 2011 FY12-09 OAK RIDGE, Tenn.-The number of health physics graduate degrees increased for both master's and doctoral candidates in 2010, but decreased for bachelor's degrees, says a report released this year by the Oak Ridge Institute for Science and Education. The ORISE report,

  6. Low temperature joining of ceramic composites

    DOE Patents [OSTI]

    Barton, Thomas J.; Anderson, Iver E.; Ijadi-Maghsoodi, Sina; Nosrati, Mohammad; Unal, Ozer

    1999-01-12

    A method of joining similar or dissimilar ceramic and ceramic composite materials, such as SiC continuous fiber ceramic composites, at relatively low joining temperatures uses a solventless, three component bonding agent effective to promote mechanical bond toughness and elevated temperature strength to operating temperatures of approximately 1200 degrees C. The bonding agent comprises a preceramic precursor, an aluminum bearing powder, such as aluminum alloy powder, and mixtures of aluminum metal or alloy powders with another powder, and and boron powder in selected proportions. The bonding agent is disposed as an interlayer between similar or dissimilar ceramic or cermaic composite materials to be joined and is heated in ambient air or inert atmosphere to a temperature not exceeding about 1200 degrees C. to form a strong and tough bond joint between the materials. The bond joint produced is characterized by a composite joint microstructure having relatively soft, compliant aluminum bearing particulate regions dispersed in a ceramic matrix.

  7. Low temperature joining of ceramic composites

    DOE Patents [OSTI]

    Barton, Thomas J.; Anderson, Iver E.; Ijadi-Maghsoodi, Sina; Nosrati, Mohammad; Unal, Ozer

    1999-07-13

    A method of joining similar or dissimilar ceramic and ceramic composite materials, such as SiC continuous fiber ceramic composites, at relatively low joining temperatures uses a solventless, three component bonding agent effective to promote mechanical bond toughness and elevated temperature strength to operating temperatures of approximately 1200 degrees C. The bonding agent comprises a preceramic precursor, an aluminum bearing powder, such as aluminum alloy powder, and mixtures of aluminum metal or alloy powders with another powder, and and boron powder in selected proportions. The bonding agent is disposed as an interlayer between similar or dissimilar ceramic or ceramic composite materials to be joined and is heated in ambient air or inert atmosphere to a temperature not exceeding about 1200 degrees C. to form a strong and tough bond joint between the materials. The bond joint produced is characterized by a composite joint microstructure having relatively soft, compliant aluminum bearing particulate regions dispersed in a ceramic matrix.

  8. Low temperature joining of ceramic composites

    DOE Patents [OSTI]

    Barton, Thomas J.; Anderson, Iver E.; Ijadi-Maghsoodi, Sina; Nosrati, Mohammad; Unal, Ozer

    2001-04-10

    A method of joining similar or dissimilar ceramic and ceramic composite materials, such as SiC continuous fiber ceramic composites, at relatively low joining temperatures uses a solventless, three component bonding agent effective to promote mechanical bond toughness and elevated temperature strength to operating temperatures of approximately 1200 degrees C. The bonding agent comprises a preceramic precursor, an aluminum bearing powder, such as aluminum alloy powder, and mixtures of aluminum metal or alloy powders with another powder, and and boron powder in selected proportions. The bonding agent is disposed as an interlayer between similar or dissimilar ceramic or cermaic composite materials to be joined and is heated in ambient air or inert atmosphere to a temperature not exceeding about 1200 degrees C. to form a strong and tough bond joint between the materials. The bond joint produced is characterized by a composite joint microstructure having relatively soft, compliant aluminum bearing particulate regions dispersed in a ceramic matrix.

  9. Low temperature joining of ceramic composites

    DOE Patents [OSTI]

    Barton, T.J.; Anderson, I.E.; Ijadi-Maghsoodi, S.; Nosrati, M.; Unal, O.

    1999-01-12

    A method of joining similar or dissimilar ceramic and ceramic composite materials, such as SiC continuous fiber ceramic composites, at relatively low joining temperatures uses a solventless, three component bonding agent effective to promote mechanical bond toughness and elevated temperature strength to operating temperatures of approximately 1200 degrees C. The bonding agent comprises a preceramic precursor, an aluminum bearing powder, such as aluminum alloy powder, and mixtures of aluminum metal or alloy powders with another powder, and boron powder in selected proportions. The bonding agent is disposed as an interlayer between similar or dissimilar ceramic or ceramic composite materials to be joined and is heated in ambient air or inert atmosphere to a temperature not exceeding about 1200 degrees C. to form a strong and tough bond joint between the materials. The bond joint produced is characterized by a composite joint microstructure having relatively soft, compliant aluminum bearing particulate regions dispersed in a ceramic matrix. 3 figs.

  10. 30-Day Federal Register Notice - Proposed | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    30-Day Federal Register Notice - Proposed 30-Day Federal Register Notice - Proposed Proposed Agency Information Collection 30-Day Federal Register Notice - Proposed (41.58 KB) More Documents & Publications 30 Day Federal Register Notice Proposed - FINAL 30 Day Federal Register Notice Extension - FINAL 30-Day Federal Register Notice - Extension

  11. Method of making a composite refractory material

    DOE Patents [OSTI]

    Morrow, Marvin S. (Kingston, TN); Holcombe, Cressie E. (Knoxville, TN)

    1995-01-01

    A composite refractory material is prepared by combining boron carbide with furan resin to form a mixture containing about 8 wt. % furan resin. The mixture is formed into a pellet which is placed into a grit pack comprising an oxide of an element such as yttrium to form a sinterable body. The sinterable body is sintered under vacuum with microwave energy at a temperature no greater than 2000.degree. C. to form a composite refractory material.

  12. Dr. Googin and his early days at Y-12, part 11 ? Early days...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    As we continue the story of John Googin's early days at Y-12, he also noted in his biography of the Manhattan Project years, some observations about Oak Ridge in general. John's...

  13. Refractory ceramic compositions and method for preparing same

    DOE Patents [OSTI]

    Holcombe, Jr., Cressie E.; Morrow, Margaret K.

    1976-07-13

    This invention relates to ceramic compositions of tungsten and tantalum oxides including 0 to 33 1/3 mole percent of a metal oxide such as hafnia. These ceramics are characterized by melting points greater than about 1400.degree.C and selectively controlled coefficients of thermal expansion of essentially zero to a negative value in the temperature range of 20.degree. to 1000.degree.C.

  14. 30 Day Federal Register Notice Extension - FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Extension - FINAL 30 Day Federal Register Notice Extension - FINAL 30DAY Federal Register Notice Extension-Final.pdf (14.21 KB) More Documents & Publications 60 Day Federal Register Notice Extension - FINAL 30-Day Federal Register Notice - Proposed 30 Day Federal Register Notice Proposed

  15. 30 Day Federal Register Notice Proposed - FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proposed - FINAL 30 Day Federal Register Notice Proposed - FINAL 30DAY Federal Resigter Notice Proposed-Final.pdf (13.65 KB) More Documents & Publications 30-Day Federal Register Notice - Proposed 30 Day Federal Register Notice Extension - FINAL 60 Day Federal Register Notice Extension

  16. 60 Day Federal Register Notice Extension - FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Extension - FINAL 60 Day Federal Register Notice Extension - FINAL 60 Day Federal Register Notice Extension-Final.pdf (13.96 KB) More Documents & Publications 30 Day Federal Register Notice Extension - FINAL 30-Day Federal Register Notice - Proposed 30 Day Federal Register Notice Proposed - FINAL

  17. 60 Day Federal Register Notice Proposed - FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proposed - FINAL 60 Day Federal Register Notice Proposed - FINAL 60 Day Federal Register Notice Proposed-Final.pdf (13.26 KB) More Documents & Publications 30 Day Federal Register Notice Proposed - FINAL 60 Day Federal Register Notice Extension - FINAL 30-Day Federal Register Notice - Proposed

  18. Robust high temperature composite and CO sensor made from such composite

    DOE Patents [OSTI]

    Dutta, Prabir K.; Ramasamy, Ramamoorthy; Li, Xiaogan; Akbar, Sheikh A.

    2010-04-13

    Described herein is a composite exhibiting a change in electrical resistance proportional to the concentration of a reducing gas present in a gas mixture, detector and sensor devices comprising the composite, a method for making the composite and for making devices comprising the composite, and a process for detecting and measuring a reducing gas in an atmosphere. In particular, the reducing gas may be carbon monoxide and the composite may comprise rutile-phase TiO2 particles and platinum nanoclusters. The composite, upon exposure to a gas mixture containing CO in concentrations of up to 10,000 ppm, exhibits an electrical resistance proportional to the concentration of the CO present. The composite is useful for making sensitive, low drift, fast recovering detectors and sensors, and for measuring CO concentrations in a gas mixture present at levels from sub-ppm up to 10,000 ppm. The composites, and devices made from the composites, are stable and operable in a temperature range of from about 450.degree. C. to about 700.degree. C., such as may be found in a combustion chamber.

  19. Concrete compositions and methods

    DOE Patents [OSTI]

    Chen, Irvin; Lee, Patricia Tung; Patterson, Joshua

    2015-06-23

    Provided herein are compositions, methods, and systems for cementitious compositions containing calcium carbonate compositions and aggregate. The compositions find use in a variety of applications, including use in a variety of building materials and building applications.

  20. Chemical Equilibrium Composition of Aqueous Systems

    Energy Science and Technology Software Center (OSTI)

    1996-12-30

    MINEQL is a subroutine package to calculate equilibrium composition of an aqueous system, accounting for mass transfer. MINEQL-EIR contains an additional base on enthalpy and heat capacity data and has the option to do calculations at temperatures different from 25 degrees C.

  1. Nuclear Engineering Enrollments and Degrees Survey, 2015 Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SURVEY UNIVERSE The 2015 Nuclear Engineering Enrollments and Degrees Survey reports degrees granted between September 1, 2014 and August 31, 2015. Enrollment information refers to the fall term 2015. The enrollments and degrees data comprises students majoring in nuclear engineering or in an option program equivalent to a major. Thirty-five academic programs reported having nuclear engineering programs during 2015, and data was received from all thirty-five programs. The report includes

  2. Earth Day Events Flyer 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Events Flyer 2016 Earth Day Events Flyer 2016 The schedule of events for the 2016 Department of Energy Earth Day activities. PDF icon Earth Day Events Flyer 2016 More Documents & ...

  3. Ideas for What to Do this Earth Day

    Broader source: Energy.gov [DOE]

    Given that Earth Day's coming up in a couple of days, you might find a few things you can do if you choose to celebrate Earth Day this year.

  4. Brief 74 Nuclear Engineering Enrollments and Degrees Survey, 2014 Data

    SciTech Connect (OSTI)

    None, None

    2015-03-15

    The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014, and enrollments for fall 2014. There are three academic programs new to this year's survey. Thirty-five academic programs reported having nuclear engineering programs during 2014, and data were provided by all thirty-five. The enrollments and degrees data include students majoring in nuclear engineering or in an option program equivalent to a major. Two nuclear engineering programs have indicated that health physics option enrollments and degrees are also reported in the health physics enrollments and degrees survey.

  5. Brief 70 Nuclear Engineering Enrollments and Degrees, 2011 Summary Information

    SciTech Connect (OSTI)

    Dr. Don Johnson

    2012-10-31

    The survey includes degrees granted between September 1, 2010 and August 31, 2011. Enrollment information refers to the fall term 2011. The enrollment and degree data include students majoring in nuclear engineering or in an option program equivalent to a major. Thirty-two academic programs reported having nuclear engineering programs during 2011, and data was received from all thirty-two programs. The data for two nuclear engineering programs include enrollments and degrees in health physics options that are also reported in the health physics enrollments and degrees data.

  6. ORISE: Report by ORISE shows health physics degrees declined...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Health physics degrees declined in 2014, enrollment trends reverse Enrollment data ... graduating with majors in health physics has declined across undergraduate, ...

  7. STUDENTS WHO RECEIVED GRADUATE DEGREES FROM THESIS WORK CONDUCTED...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and astrophysical capture processes R.E. Tribble A.M. Mukhamedzhanov Graduate Teaching Assistant Pursuing degree at Department of Statistics, Texas A&M University Jim...

  8. Biography U. Dsterloh Degree: PD Dr.- Ing. habil. Institution...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U. Dsterloh Degree: PD Dr.- Ing. habil. Institution: Clausthal University of Technology. Chair: chair for waste disposal technologies and geomechanics. 1982- 1988 field of study:...

  9. Nuclear Engineering Enrollments and Degrees Survey, 2014 Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    having nuclear engineering programs during 2014, and data were provided by all thirty-five. The enrollments and degrees data include students majoring in nuclear engineering ...

  10. STUDENTS WHO RECEIVED GRADUATE DEGREES FROM THESIS WORK CONDUCTED...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 STUDENTS WHO RECEIVED GRADUATE DEGREES FROM THESIS WORK CONDUCTED AT THE CYCLOTRON INSTITUTE April 1, 2010 - March 31, 2011 Name Year Thesis Title Advisor Present Position Zach...

  11. High temperature expanding cement composition and use

    DOE Patents [OSTI]

    Nelson, Erik B.; Eilers, Louis H.

    1982-01-01

    A hydratable cement composition useful for preparing a pectolite-containing expanding cement at temperatures above about 150.degree. C. comprising a water soluble sodium salt of a weak acid, a 0.1 molar aqueous solution of which salt has a pH of between about 7.5 and about 11.5, a calcium source, and a silicon source, where the atomic ratio of sodium to calcium to silicon ranges from about 0.3:0.6:1 to about 0.03:1:1; aqueous slurries prepared therefrom and the use of such slurries for plugging subterranean cavities at a temperature of at least about 150.degree. C. The invention composition is useful for preparing a pectolite-containing expansive cement having about 0.2 to about 2 percent expansion, by volume, when cured at at least 150.degree. C.

  12. Composite foams

    DOE Patents [OSTI]

    Williams, Jr., Joel M.; Nyitray, Alice M.; Wilkerson, Mark H.

    1991-01-01

    Composite foams are provided comprising a first rigid, microcellular, open-celled organic polymer foam having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 and a pore size of from about 1 micron to about 30 microns, said first foam containing a second polymer having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 or a second polymer foam having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 and a pore size of from about 0.01 microns to about 1.0 micron within the open cells of said first foam.

  13. Composite foams

    DOE Patents [OSTI]

    Williams, Jr., Joel M.; Nyitray, Alice M.; Wilkerson, Mark H.

    1990-01-01

    Composite foams are provided comprising a first rigid, microcellular, open-celled organic polymer foam having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 and a pore size of from about 1 micron to about 30 microns, said first foam containing a second polymer having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 or a second polymer foam having a density of from about 0.015 g/cm.sup.3 to about 0.20 g/cm.sup.3 and a pore size of from about 0.01 microns to about 1.0 micron within the open cells of said first foam.

  14. Energy Department's Race to 7-Day Solar Prize Competition to...

    Office of Environmental Management (EM)

    Department's Race to 7-Day Solar Prize Competition to Speed Solar Deployment Energy Department's Race to 7-Day Solar Prize Competition to Speed Solar Deployment March 4, 2015 - ...

  15. ADR Lunchtime Program: Conflict Resolution Day - Civility in...

    Energy Savers [EERE]

    Conflict Resolution Day - Civility in the Workplace ADR Lunchtime Program: Conflict Resolution Day - Civility in the Workplace Deputy Secretary of Energy - Dr. Elizabeth ...

  16. Preindustrial to present-day changes in tropospheric hydroxyl...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Room, GFDL Preindustrial to present-day changes in tropospheric hydroxyl radical and methane lifetime from the ACCMIP Vaishali Naik GFDL Preindustrial to present-day changes in...

  17. NERSC User Day February 13 - Trends, Discovery, and Innovation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Day February 13 - Trends, Discovery, and Innovation in HPC NERSC User Day February 13 - Trends, Discovery, and Innovation in HPC February 10, 2013 by Francesca Verdier All members ...

  18. Lien Ze day Solar Hunan Science and Technology | Open Energy...

    Open Energy Info (EERE)

    day Solar Hunan Science and Technology Jump to: navigation, search Name: Lien Ze-day Solar Hunan Science and Technology Place: Xiangtan, Hunan Province, China Product: PV cell...

  19. Demonstration and Deployment Workshop Day 2 - Biochem | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstration and Deployment Workshop Day 2 - Biochem Day 2 Report - Breakout Group: Biochem danddworkshopbiochem2.pdf (289.41 KB) More Documents & Publications Demonstration ...

  20. Demonstration and Deployment Workshop - Day 2 Report Out | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (351.26 KB) More Documents & Publications Demonstration and Deployment Workshop - Day 1 Report Out Demonstration and Deployment Workshop - Day 1 Report Out ...

  1. Los Alamos National Laboratory participates in National Lab Day...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Day Los Alamos National Laboratory participates in National Lab Day to increase awareness of science across the nation Connecting teachers and students with scientists,...

  2. Introduce a Girl to Engineering Day | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Science and Technology, in conjunction with Argonne Education, present "Introduce a Girl to Engineering Day". This day gives young female students a unique opportunity to...

  3. Durable polymer-aerogel based superhydrophobic coatings, a composite material

    DOE Patents [OSTI]

    Kissel, David J; Brinker, Charles Jeffrey

    2014-03-04

    Provided are polymer-aerogel composite coatings, devices and articles including polymer-aerogel composite coatings, and methods for preparing the polymer-aerogel composite. The exemplary article can include a surface, wherein the surface includes at least one region and a polymer-aerogel composite coating disposed over the at least one region, wherein the polymer-aerogel composite coating has a water contact angle of at least about 140.degree. and a contact angle hysteresis of less than about 1.degree.. The polymer-aerogel composite coating can include a polymer and an ultra high water content catalyzed polysilicate aerogel, the polysilicate aerogel including a three dimensional network of silica particles having surface functional groups derivatized with a silylating agent and a plurality of pores.

  4. Durable polymer-aerogel based superhydrophobic coatings: a composite material

    DOE Patents [OSTI]

    Kissel, David J.; Brinker, Charles Jeffrey

    2016-02-02

    Provided are polymer-aerogel composite coatings, devices and articles including polymer-aerogel composite coatings, and methods for preparing the polymer-aerogel composite. The exemplary article can include a surface, wherein the surface includes at least one region and a polymer-aerogel composite coating disposed over the at least one region, wherein the polymer-aerogel composite coating has a water contact angle of at least about 140.degree. and a contact angle hysteresis of less than about 1.degree.. The polymer-aerogel composite coating can include a polymer and an ultra high water content catalyzed polysilicate aerogel, the polysilicate aerogel including a three dimensional network of silica particles having surface functional groups derivatized with a silylating agent and a plurality of pores.

  5. Method of preparing corrosion resistant composite materials

    DOE Patents [OSTI]

    Kaun, Thomas D.

    1993-01-01

    Method of manufacture of ceramic materials which require stability in severely-corrosive environment having high alkali-metal activity, high sulfur/sulfide activity and/or molten halides at temperatures of 200.degree.-550.degree. C. or organic salt (including SO.sub.2 and SO.sub.2 Cl.sub.2) at temperatures of 25.degree.-200.degree. C. These surfide ceramics form stoichiometric (single-phase) compounds with sulfides of Ca, Li, Na, K, Al, Mg, Si, Y, La, Ce, Ga, Ba, Zr and Sr and show melting-points that are sufficiently low and have excellent wettability with many metals (Fe, Ni, Mo) to easily form metal/ceramic seals. Ceramic compositions are also formulated to adequately match thermal expansion coefficient of adjacent metal components.

  6. Learn About Introduce a Girl to Engineering Day | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Learn About Introduce a Girl to Engineering Day Share Duration 2:30

  7. Introduce a Girl to Engineering Day 2014 | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Introduce a Girl to Engineering Day 2014 1 of 25 Introduce a Girl to Engineering Day 2014 Credit: Argonne National Laboratory (photo by Mark Lopez) Introduce a Girl to Engineering Day 2014 1 of 25 Introduce a Girl to Engineering Day 2014 Credit: Argonne National Laboratory (photo by Mark Lopez) Introduce a Girl to Engineering Day 2014 2 of 25 Introduce a Girl to Engineering Day 2014 Credit: Argonne National Laboratory (photo by Wes Agresta) Introduce a Girl to Engineering Day 2014 3 of 25

  8. Formation of tough composite joints

    SciTech Connect (OSTI)

    Brun, M.K.

    1997-05-01

    Joints which exhibit tough fracture behavior were formed in a composite with a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. In composites with BN coatings fibers were aligned uniaxially, while composites with Si{sub 3}N{sub 4}-coated fibers had a 0/90{degree} architecture. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure have been proposed. Joints with a simple overlap geometry (only a few fingers) would have to be very long in order to prevent brittle failure. Typical failure in these joints is caused by a crack propagating along the interfaces between the joint fingers. Joints of the same overall length, but with geometry changed to be symmetric about the joint centerline and with an extra shear surface exhibited tough fractures accompanied with extensive fiber pullout. The initial matrix cracking of these joints was relatively low because cracks propagated easily through the ends of the fingers. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength from 9 to 25 MPa, by changing the fiber coating, increased matrix cracking and ultimate strength of the composite significantly. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints will permit building of structures containing joints with only a minor reduction of design stresses.

  9. Performance of Blackglas{trademark} composites in 4000-hour oxidation study

    SciTech Connect (OSTI)

    Campbell, S.; Gonczy, S.; McNallan, M.; Cox, A.

    1996-12-31

    The effect of long term (4000 hour) oxidation on the mechanical properties of Blackglas{trademark}-Nitrided Nextel{trademark}312 Ceramic Matrix Composites in the temperature range of 500{degrees} - 700{degrees}C was investigated. Flexure specimens of the title composites prepared using three different pyrolysis processes were subjected to oxidation in flowing dry air at 500{degrees}, 600{degrees}C, and 700{degrees}C. Samples were removed at several different time intervals for 3-point flexure analysis. Results indicate that processing conditions had very little effect on the oxidation resistance of this system. At 600{degrees} and 700{degrees}C the mechanical properties degrade continuously to a steady value about half the original flexure strength. At 500{degrees}C, material properties initially improve then begin to slowly degrade. Optical microscopy indicates that oxidation of the matrix begins at the matrix/fiber interface and microcracks and proceeds into the bulk of the matrix.

  10. VI-12 STUDENTS WHO RECEIVED GRADUATE DEGREES FROM THESIS WORK...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    D. H. Youngblood Continue to Ph. D. degree Guangyao Chen 2013 Initial Conditions from Color Glass Condensate R. J. Fries Post. Doc. at Cyclotron Institute, Texas A&M University...

  11. Charm degrees of freedom in the quark gluon plasma

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mukherjee, Swagato; Petreczky, Peter; Sharma, Sayantan

    2016-01-11

    The lattice QCD studies on fluctuations and correlations of charm quantum number have established that deconfinement of charm degrees of freedom sets in around the chiral crossover temperature, Tc; i.e., charm degrees of freedom carrying fractional baryonic charge start to appear. When we reexamine those same lattice QCD data we show that, in addition to the contributions from quarklike excitations, the partial pressure of charm degrees of freedom may still contain significant contributions from open-charm-meson- and baryonlike excitations associated with integral baryonic charges for temperatures up to 1.2Tc. Finally, charm-quark quasiparticles become the dominant degrees of freedom for temperatures T>1.2Tc.

  12. Brief 66 Nuclear Engineering Enrollments and Degrees Survey, 2009 Data

    SciTech Connect (OSTI)

    Dr. Larry M. Blair, Analysis and Evaluation, Science Education Programs

    2010-03-01

    The survey includes degrees granted between September 1, 2008 and August 31, 2009, and fall 2009 enrollments. Thirty-two academic programs reported having nuclear engineering programs during 2009, and data was obtained from all thirty-two.

  13. Microsoft Word - VI_12_Degrees Awarded 2015.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear systems A. Bonasera Post Doc. at INFN - Laboratori Nazionali del Sud, Catania, Italy STUDENTS WHO RECEIVED GRADUATE DEGREES FROM NON-THESIS April 1, 2014 - March 31, 2015 ...

  14. Brief 75 Health Physics Enrollments and Degrees Survey, 2014 Data

    SciTech Connect (OSTI)

    None, None

    2015-03-05

    The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014. Enrollment information refers to the fall term 2014. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program equivalent to a major.

  15. Brief 73 Health Physics Enrollments and Degrees Survey, 2013 Data

    SciTech Connect (OSTI)

    None, None

    2014-02-15

    The survey includes degrees granted between September 1, 2012 and August 31, 2013. Enrollment information refers to the fall term 2013. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program equivalent to a major.taoi_na

  16. Health Physics Enrollments and Degrees Survey, 2013 Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SURVEY UNIVERSE The survey includes degrees granted between September 1, 2012 and August 31, 2013. Enrollment information refers to the fall term 2013. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program

  17. Health Physics Enrollments and Degrees Survey, 2014 Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SURVEY UNIVERSE The 2014 survey includes degrees granted between September 1, 2013 and August 31, 2014. Enrollment information refers to the fall term 2014. Twenty-two academic programs were included in the survey universe, with all 22 programs providing data. Since 2009, data for two health physics programs located in engineering departments are also included in the nuclear engineering survey. The enrollments and degrees data includes students majoring in health physics or in an option program

  18. 12 Days of Energy Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Days of Energy Savings 12 Days of Energy Savings December 24, 2012 - 9:30am Addthis Day 12: Drive Your Way to Fuel Savings 1 of 12 Day 12: Drive Your Way to Fuel Savings Save money on fuel costs by emptying your car after all your shopping trips -- an extra 100 pounds in your vehicle could increase gas costs by up to $.08 a gallon. Image: Sarah Gerrity, Energy Department Day 11: Plug Holiday Decorations into Power Strips 2 of 12 Day 11: Plug Holiday Decorations into Power Strips Stop phantom

  19. 12 Days of Energy Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    12 Days of Energy Savings 12 Days of Energy Savings Addthis Day 12: Drive Your Way to Fuel Savings 1 of 12 Day 12: Drive Your Way to Fuel Savings Save money on fuel costs by emptying your car after all your shopping trips -- an extra 100 pounds in your vehicle could increase gas costs by up to $.08 a gallon. Image: Sarah Gerrity, Energy Department Day 11: Plug Holiday Decorations into Power Strips 2 of 12 Day 11: Plug Holiday Decorations into Power Strips Stop phantom loads -- which cost

  20. Composite biaxially textured substrates using ultrasonic consolidation

    DOE Patents [OSTI]

    Blue, Craig A; Goyal, Amit

    2013-04-23

    A method of forming a composite sheet includes disposing an untextured metal or alloy first sheet in contact with a second sheet in an aligned opposing position; bonding the first sheet to the second sheet by applying an oscillating ultrasonic force to at least one of the first sheet and the second sheet to form an untextured intermediate composite sheet; and annealing the untextured intermediate composite sheet at a temperature lower than a primary re-crystallization temperature of the second sheet and higher than a primary re-crystallization temperature of the first sheet to convert the untextured first sheet into a cube textured sheet, wherein the cube texture is characterized by a .phi.-scan having a FWHM of no more than 15.degree. in all directions, the second sheet remaining untextured, to form a composite sheet.

  1. Composite of refractory material

    DOE Patents [OSTI]

    Holcombe, Cressie E. (Knoxville, TN); Morrow, Marvin S. (Kingston, TN)

    1994-01-01

    A composite refractory material composition comprises a boron carbide matrix and minor constituents of yttrium-boron-oxygen-carbon phases uniformly distributed throughout the boron carbide matrix.

  2. Composite of refractory material

    DOE Patents [OSTI]

    Holcombe, C.E.; Morrow, M.S.

    1994-07-19

    A composite refractory material composition comprises a boron carbide matrix and minor constituents of yttrium-boron-oxygen-carbon phases uniformly distributed throughout the boron carbide matrix.

  3. Saving Energy This Memorial Day | Department of Energy

    Energy Savers [EERE]

    This Memorial Day Saving Energy This Memorial Day May 19, 2014 - 4:07pm Addthis Be energy ... What does this mean for me? There are plenty of ways to save energy while having fun ...

  4. Take Our Daughters and Sons to Work Day

    Broader source: Energy.gov [DOE]

    This Thursday, April 25, 2013 is National Take Your Sons and Daughters to work Day.  Whereas there is no "Formal" activity this year for Take your Sons and Daughters to Work Day, DOE has combined...

  5. Getting Involved in Manufacturing Day – College Educators Edition Webinar

    Broader source: Energy.gov [DOE]

    This webinar will help address questions on why and how community colleges, universities, and technical schools can get involved with MFG DAY.  Led by MFG DAY Co-Producers, the webinar will also...

  6. Energy Storage Systems 2012 Peer Review Presentations - Day 2...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The 3-day conference included 9 sessions plus two poster sessions. Presentations from the second session of Day 2, chaired by Sandia's Ross Guttromson, are below. ESS 2012 Peer ...

  7. How Are You Celebrating Earth Day? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    22, 2010 - 7:30am Addthis Happy Earth Day Today marks the 40th anniversary of celebrating Earth Day, and we hope you're getting into the spirit and committing to protecting the ...

  8. AMO Industry Day Workshop, February 25th, Targets Smart Manufacturing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Day Workshop, February 25th, Targets Smart Manufacturing FOA AMO Industry Day Workshop, February 25th, Targets Smart Manufacturing FOA February 12, 2015 - 3:40pm Addthis ...

  9. Colorado School of Mines: Spring 2016 Career Day | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Day Colorado School of Mines: Spring 2016 Career Day February 9, 2016 11:00AM to 5:00PM EST 1500 Illinois Street, Golden, CO 80401 Website Link Contact Kimberly Chappell andor...

  10. Day4 Energy Certus Life Cycle JV | Open Energy Information

    Open Energy Info (EERE)

    Day4 Energy Certus Life Cycle JV Jump to: navigation, search Name: Day4 Energy & Certus Life Cycle JV Place: Italy Product: JV company will develop photovoltaic power projects in...

  11. Breaking a Cycle-Free Lifestyle for Earth Day

    Broader source: Energy.gov [DOE]

    One woman works through traumatic bicycle-related experiences while contemplating the purchase of a new bike for Earth Day.

  12. DOE celebrates Earth Day | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) celebrates Earth Day Tuesday, April 22, 2014 - 4:01pm DOE today celebrated Earth Day with Community Day on the DOE Pavilion. More than 20 local green exhibitors, including various DOE departments, showcased their environmental programs. Here Fred Winter and Joyce Kim promote modernizing the grid through innovative technology. DOE celebrates Earth Day Related Topics community education environment Related News Pantex makes paper into compost Concern for the Environment

  13. Entrepreneurs Celebrated at White House Demo Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Entrepreneurs Celebrated at White House Demo Day Entrepreneurs Celebrated at White House Demo Day August 4, 2015 - 1:50pm Addthis Entrepreneurs Celebrated at White House Demo Day Minh Le Minh Le Deputy Director, Solar Energy Technologies Office Today, President Obama is hosting the first-ever White House Demo Day, showcasing entrepreneurs who have launched innovative businesses across the country. The event will highlight a diverse set of entrepreneurs: people whose stories show why America

  14. U-245: Critical Java 0-day flaw exploited

    Broader source: Energy.gov [DOE]

    Targeted attacks exploiting a zero-day Java vulnerability to deliver the Poison Ivy RAT onto the unsuspecting victims' machines

  15. Making Memorial Day Plans? Be Sure They're Efficient

    Broader source: Energy.gov [DOE]

    Useful tips from Energy Savers - from cooking, to entertaining, to driving - how to stay energy efficient this Memorial Day weekend.

  16. Innovative Manufacturing Initiative Recognition Day- Final Participant Listing

    Broader source: Energy.gov [DOE]

    Participant listing for Innovative Manufacturing Initiative Recognition Day held in Washington, D.C. on June 20, 2012

  17. Stacked for Success: Celebrating National Hydrogen and Fuel Cell Day |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Stacked for Success: Celebrating National Hydrogen and Fuel Cell Day Stacked for Success: Celebrating National Hydrogen and Fuel Cell Day October 8, 2015 - 11:15am Addthis Stacked for Success: Celebrating National Hydrogen and Fuel Cell Day David Friedman David Friedman Assistant Secretary for Energy Efficiency and Renewable Energy (Acting) Do you know the atomic weight of hydrogen? It's 1.008, which makes today, October 8, a great day to celebrate National Hydrogen and

  18. Day 1: Innovation at the 2013 ARPA-E Summit

    Broader source: Energy.gov [DOE]

    The fourth annual ARPA-E Energy Innovation Summit kicked off yesterday -- get the highlights from day 1.

  19. Energy Department Celebrates National Weatherization Day | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Celebrates National Weatherization Day Energy Department Celebrates National Weatherization Day October 30, 2015 - 2:30pm Addthis A Home Energy Professionals Certifications Energy Auditor performs a Blower Door Test in Colorado. A Home Energy Professionals Certifications Energy Auditor performs a Blower Door Test in Colorado. Dr. Kathleen Hogan Dr. Kathleen Hogan Deputy Assistant Secretary for Energy Efficiency What are the key facts? October 30 is National Weatherization Day, a day

  20. Demonstration and Deployment Workshop - Day 1 Report Out | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Products danddworkshopproducts.pdf (266.05 KB) More Documents & Publications Demonstration and Deployment Workshop - Day 1

  1. Demonstration and Deployment Workshop - Day 1 Report Out | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Feedstocks danddworkshopfeedstockspdf.pdf (347.81 KB) More Documents & Publications Demonstration and Deployment Workshop - Day 2

  2. Webtrends Archives by Fiscal Year — Earth Day

    Office of Energy Efficiency and Renewable Energy (EERE)

    From the EERE Web Statistics Archive: Corporate sites, Webtrends archives for the Earth Day site by fiscal year.

  3. Method of forming an electrically conductive cellulose composite

    DOE Patents [OSTI]

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2011-11-22

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  4. Welding consumable selection for cryogenic (4{degrees}K) application

    SciTech Connect (OSTI)

    Kane, S.F.; Siewert, T.A.

    1994-12-31

    Brookhaven National Laboratory (BNL) has begun construction of a large (3.8 kilometer circumference) heavy ion collider for the Department of Energy. The collider uses superconducting magnets, operating at 4{degrees}K in supercritical helium, which meets the definition of a pressure vessel. The ASME Boiler & Pressure Vessel Code grants an exemption from impact testing to certain metals, but only for operating temperatures down to 20{degrees}K. Research and the latest change to ASTM Standard E23 have invalidated Charpy testing at 4{degrees}K, thus compliance with the Code is not possible. This effort was undertaken to identify the weld process and weld material necessary to comply with the intent of the Code (impact test) requirements, that is, to design a weld joint that will assure adequate fracture toughness. We will report the results of this development and testing, and conclude that nitrogen and maganese enhanced 385L provides a superior weld metal for 4{degrees}K cryogenic applications without the exaggerated purity concerns normally associated with superaustenitic weld materials. This development has been so successful that BNL has procured 15,000 pounds of this material for magnet production. Oxygen content, manifested as inclusion density, has the single most significant effect upon fracture toughness and impact strength. Finally, we report that GMAW is a viable welding process, using off-the-shelf equipment, for 4{degrees}K cryogenic applications.

  5. Higher-degree linear approximations of nonlinear systems

    SciTech Connect (OSTI)

    Karahan, S.

    1989-01-01

    In this dissertation, the author develops a new method for obtaining higher degree linear approximations of nonlinear control systems. The standard approach in the analysis and synthesis of nonlinear systems is a first order approximation by a linear model. This is usually performed by obtaining a series expansion of the system at some nominal operating point and retaining only the first degree terms in the series. The accuracy of this approximation depends on how far the system moves away from the normal point, and on the relative magnitudes of the higher degree terms in the series expansion. The approximation is achieved by finding an appropriate nonlinear coordinate transformation-feedback pair to perform the higher degree linearization. With the proposed method, one can improve the accuracy of the approximation up to arbitrarily higher degrees, provided certain solvability conditions are satisfied. The Hunt-Su linearizability theorem makes these conditions precise. This approach is similar to Poincare's Normal Form Theorem in formulation, but different in its solution method. After some mathematical background the author derives a set of equations (called the Homological Equations). A solution to this system of linear equations is equivalent to the solution to the problem of approximate linearization. However, it is generally not possible to solve the system of equations exactly. He outlines a method for systematically finding approximate solutions to these equations using singular value decomposition, while minimizing an error with respect to some defined norm.

  6. Method for rapid fabrication of fiber preforms and structural composite materials

    DOE Patents [OSTI]

    Klett, James W. (Knoxville, TN); Burchell, Timothy D. (Oak Ridge, TN); Bailey, Jeffrey L. (Clinton, TN)

    1998-01-01

    A densified carbon matrix carbon fiber composite preform is made by vacuum molding an aqueous slurry of carbon fibers and carbonizable organic powder to form a molded part. The molded part is dried in an oven at 50.degree. C. for 14 hours and hot pressed at 2000 psi at 400.degree. C. for 3 hours. The hot pressed part is carbonized at 650.degree. C. under nitrogen for 3 hours and graphitized at 2400.degree. C. to form a graphitic structure in the matrix of the densified carbon matrix carbon fiber composite preform. The densified preform has a density greater than 1.1 g/cc.

  7. Method for rapid fabrication of fiber preforms and structural composite materials

    DOE Patents [OSTI]

    Klett, James W. (Knoxville, TN); Burchell, Timothy D. (Oak Ridge, TN); Bailey, Jeffrey L. (Clinton, TN)

    1999-01-01

    A densified carbon matrix carbon fiber composite preform is made by vacuum molding an aqueous slurry of carbon fibers and carbonizable organic powder to form a molded part. The molded part is dried in an oven at 50.degree. C. for 14 hours and hot pressed at 2000 psi at 400.degree. C. for 3 hours. The hot pressed part is carbonized at 650.degree. C. under nitrogen for 3 hours and graphite at 2400.degree. C. to form a graphitic structure in the matrix of the densified carbon matrix carbon fiber composite preform. The densified preform has a density greater than 1.1 g/cc.

  8. Highly conductive electrolyte composites containing glass and ceramic, and method of manufacture

    DOE Patents [OSTI]

    Hash, Mark C.; Bloom, Ira D.

    1992-01-01

    An electrolyte composite is manufactured by pressurizing a mixture of sodium ion conductive glass and an ionically conductive compound at between 12,000 and 24,000 pounds per square inch to produce a pellet. The resulting pellet is then sintered at relatively lower temperatures (800.degree. C.-1200.degree. C.), for example 1000.degree. C., than are typically required (1400.degree. C.) when fabricating single constituent ceramic electrolytes. The resultant composite is 100 percent conductive at 250.degree. C. with conductivity values of 2.5 to 4.times.10.sup.-2 (ohm-cm).sup.-1. The matrix exhibits chemical stability against sodium for 100 hours at 250.degree. to 300.degree. C.

  9. CVD method of forming self-lubricating composites

    DOE Patents [OSTI]

    Besmann, Theodore M. (Oak Ridge, TN); Blau, Peter J. (Oak Ridge, TN); Lee, Woo Y. (Knoxville, TN); Bae, Yong W. (Oak Ridge, TN)

    1998-01-01

    An article having a multiphase composite lubricant coating of a hard refractory matrix phase of titanium nitride dispersed with particles of a solid lubricating phase of molybdenum disulfide is prepared by heating the article to temperatures between 350.degree. and 850.degree. C. in a reaction vessel at a reduced pressure and passing a gaseous mixture of Ti((CH.sub.3).sub.2 N).sub.4, MoF.sub.6, H.sub.2 S and NH.sub.3 over the heated article forming a multiphase composite lubricant coating on the article.

  10. Sustainable Transportation Day Drives Innovation Forward | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sustainable Transportation Day Drives Innovation Forward Sustainable Transportation Day Drives Innovation Forward June 24, 2015 - 3:29pm Addthis Sustainable Trucking 1 of 13 Sustainable Trucking The Freightliner SuperTruck stopped by Energy Department headquarters as part of Sustainable Transportation Day on Monday, June 22, 2015. The Energy Department-supported truck has achieved a fuel efficiency of 12.2 miles per gallon, more than double that of the baseline vehicle. Image: Matt

  11. Old Dominion University to Celebrate Annual Womengineers Day | Jefferson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Old Dominion University to Celebrate Annual Womengineers Day Old Dominion University to Celebrate Annual Womengineers Day February 26, 2002 ODU Womengineers Poster Old Dominion University is planning its second annual Womengineers Day for Saturday, March 9. Sponsored by the College of Engineering and Technology in partnership with the Hampton Roads Technology Council and the Center for Innovative Technology (CIT), the event is designed for students, professional engineers and teachers of

  12. Y-12 Earth Day | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Earth Day Y-12 Earth Day The mp4 video format is not supported by this browser. Download video Captions: On Time: 9:40 min. Y-12 employees celebrated Earth Day through random acts of green, including a drawing contest for children and a special song written and performed by Sam Easterling of Environment, Safety and Health. Several local organizations also provided information, including Tennessee Wildlife Resources Agency, Ijams Nature Center and the Roane County Master Gardner Association.

  13. Y-12 Volunteer Day 2015 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Volunteer Day 2015 Y-12 Volunteer Day 2015 The mp4 video format is not supported by this browser. Download video Captions: On Time: 3:57 min. Hundreds of Y-12 employees friends and family members spread across several counties during Y-12's Day of Volunteering. View a short film highlighting efforts at the Volunteer Ministry Center in Knoxville, the Oak Ridge Nursery School, the Children's Museum of Oak Ridge and the Oak Ridge Heritage and Preservation Association

  14. Energy Storage Systems 2010 Update Conference Presentations - Day 1,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 1 | Department of Energy 1 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the first session

  15. Energy Storage Systems 2010 Update Conference Presentations - Day 1,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 2 | Department of Energy 2 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 2 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the second session

  16. Energy Storage Systems 2010 Update Conference Presentations - Day 1,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 3 | Department of Energy 3 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the third session

  17. Energy Storage Systems 2010 Update Conference Presentations - Day 1,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 4 | Department of Energy 4 Energy Storage Systems 2010 Update Conference Presentations - Day 1, Session 4 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the fourth session

  18. Energy Storage Systems 2010 Update Conference Presentations - Day 2,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 1 | Department of Energy 1 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the first session

  19. Energy Storage Systems 2010 Update Conference Presentations - Day 2,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 2 | Department of Energy 2 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 2 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the second session

  20. Energy Storage Systems 2010 Update Conference Presentations - Day 2,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 3 | Department of Energy 3 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the third session

  1. Energy Storage Systems 2010 Update Conference Presentations - Day 2,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 4 | Department of Energy 4 Energy Storage Systems 2010 Update Conference Presentations - Day 2, Session 4 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the fourth session

  2. Energy Storage Systems 2010 Update Conference Presentations - Day 3,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 1 | Department of Energy 1 Energy Storage Systems 2010 Update Conference Presentations - Day 3, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the first session

  3. Energy Storage Systems 2010 Update Conference Presentations - Day 3,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 2 | Department of Energy 2 Energy Storage Systems 2010 Update Conference Presentations - Day 3, Session 2 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the second session

  4. Energy Storage Systems 2010 Update Conference Presentations - Day 3,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session 3 | Department of Energy 3 Energy Storage Systems 2010 Update Conference Presentations - Day 3, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from the third session

  5. Energy Storage Systems 2010 Update Conference Presentations - Day 3: Poster

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session | Department of Energy : Poster Session Energy Storage Systems 2010 Update Conference Presentations - Day 3: Poster Session The U.S. DOE Energy Storage Systems Program (ESS) conducted a record-breaking Update Conference at the Washington DC Marriott Hotel on Nov. 2 - 4, 2010, with more than 500 attendees. The 2010 agenda reflected increased national interest in energy storage issues. The 3-day conference included 11 sessions plus a poster session on the final day. Presentations from

  6. 2015 SPIDERS JCTD Industry Day Presentations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 SPIDERS JCTD Industry Day Presentations 2015 SPIDERS JCTD Industry Day Presentations This page features links to the presentations given during the Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) Joint Capability Technology Demonstration (JCTD) phase 3 Industry Day held on August 27, 2015, at the Hawaii Convention Center in Honolulu, Hawaii. Transitioning SPIDERS JCTD: Presented by Bill Anderson (866.88 KB) SPIDERS Integrated Assessment and Operational

  7. 2012 Advanced Applications Research & Development Peer Review - Day 1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentations | Department of Energy 1 Presentations 2012 Advanced Applications Research & Development Peer Review - Day 1 Presentations The Advanced Applications Research & Development Peer Review included seven sessions over 2 days on June 12 - 13, 2012. Presentations from Day 1 (Sessions I through V) are available below. Session I: Dan Trudnowski, Ning Zhou, Mani Venkatasubramanian Session II: Brett Amidan, Bharat Bhargava, Ning Zhou Session III: Ken Martin, Mani

  8. 2012 Advanced Applications Research & Development Peer Review - Day 2

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presentations | Department of Energy 2 Presentations 2012 Advanced Applications Research & Development Peer Review - Day 2 Presentations The Advanced Applications Research & Development Peer Review included seven sessions over 2 days on June 12 - 13, 2012. Presentations from Day 2 (Sessions VI and VII) are available below. Session VI: Yuri Makarov, Henry Huang, Jim McCalley Session VII: Carlos Martinez, Pete Sauer, Gil Tam 2012 Advanced Applications R&D Peer Review - Real-Time

  9. 2013 Reliability & Markets Peer Review - Day 1 Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 1 Presentations 2013 Reliability & Markets Peer Review - Day 1 Presentations The Transmission Reliability R&D Reliability & Markets Peer Review included 6 sessions over 2 days on August 6 - 7, 2013. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Ben Hobbs (Johns Hopkins), Kameshwar Poolla (UC Berkeley) Session II: Ray Zimmerman (Cornell), Hsiao-Dong Chiang (Cornell) Session III: Shmuel Oren (UC Berkeley), Dan Tylavsky (U Arizona), Tom

  10. 2013 Reliability & Markets Peer Review - Day 2 Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 2 Presentations 2013 Reliability & Markets Peer Review - Day 2 Presentations The Transmission Reliability R&D Reliability & Markets Peer Review included 6 sessions over 2 days on August 6 - 7, 2013. Presentations from Day 2 (Sessions V and VI) are available below. Session V: Tim Mount (Cornell), Bill Schulze (Cornell), Lang Tong (Cornell) Session VI: Max Zhang (Cornell) 2013 R&M Peer Review - Evaluating the Effects of Managing Controllable Demand and Distributed

  11. 2013 Transmission Reliability Program Peer Review - Day 1 Presentations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1 Presentations 2013 Transmission Reliability Program Peer Review - Day 1 Presentations The Transmission Reliability Program Peer Review included six sessions over 2 days on June 27 - 28, 2013. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Bharat Bhargava (EPG), Brett Amidan (PNNL), Ken Martin (EPG) Session II: Mark Buckner (ORNL) Session III: Dan Trudnowski (U Montana), Ning Zhou (PNNL) Session IV: Frank Tuffner (PNNL), Bernie

  12. 2013 Transmission Reliability Program Peer Review - Day 2 Presentations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2 Presentations 2013 Transmission Reliability Program Peer Review - Day 2 Presentations The Transmission Reliability Program Peer Review included six sessions over 2 days on June 27 - 28, 2013. Presentations from Day 2 (Sessions V and VI) are available below. Session V: Ken Martin (EPG), Jim Thorp (Virginia Tech), Scott Ghiocel (RPI), Mani Venkatasubramanian (WSU) Session VI: Pete Sauer (U Illinois), Carlos Martinez (ASR), Gil Tam (EPG) 2013 TR Review - Data Validation

  13. 2014 Reliability & Markets Peer Review - Day 1 Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 1 Presentations 2014 Reliability & Markets Peer Review - Day 1 Presentations The Transmission Reliability R&D Reliability & Markets Peer Review included 6 sessions over 2 days on August 5 - 6, 2014. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Ray Zimmerman, Bill Schulze, Rim Mount Session II: Hsiao-Dong Chiang, Zhifang Wang Session III: Ben Hobbs, Alejandro Dominguez-Garcia, Lang Tong Session IV: Lindsay Anderson, Kory Hedman 2014

  14. 2014 Transmission Reliability Program Peer Review - Day 1 Presentations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1 Presentations 2014 Transmission Reliability Program Peer Review - Day 1 Presentations The Transmission Reliability Program Peer Review included 6 sessions over 2 days on June 3 - 4, 2014. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Allen Goldstein (NIST), Paul Ewing (ORNL), Mark Buckner (ORNL) Session II: Bernie Lesieutre (U Wisconsin), Pavel Etingov (PNNL), Harold Kirkham (PNNL) Session III: John Pierre (U Montana), Mani

  15. 2014 Transmission Reliability Program Peer Review - Day 2 Presentations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2 Presentations 2014 Transmission Reliability Program Peer Review - Day 2 Presentations The Transmission Reliability Program Peer Review included 6 sessions over 2 days on June 3- 4, 2014. Presentations from Day 2 (Sessions V and VI) are available below. Session V: Simon Mo (Electric Power Group), Jim Thorp (VA Tech), Scott Ghiocel (RPI), Dave Schoenwald (Sandia) Session VI: Bharat Bhargava (Electric Power Group), Brett Amidan (PNNL), Philip Irminger (ORNL) 2014 TR Peer

  16. 2015 Reliability & Markets Peer Review - Day 1 Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 1 Presentations 2015 Reliability & Markets Peer Review - Day 1 Presentations The Transmission Reliability R&D Reliability & Markets Peer Review included 6 sessions over 2 days on August 4 - 5, 2015. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Shmuel Oren, Eilyan Bitar, Anna Scaglione Session II: Pravin Varaiya, Alejandro Dominguez-Garcia Session III: Kory Hedman, Bill Schulze, Ben Hobbs Session IV: Lang Tong, Tom Overbye, Zhifang

  17. 2015 Transmission Reliability Program Peer Review - Day 1 Presentations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1 Presentations 2015 Transmission Reliability Program Peer Review - Day 1 Presentations The 2015 Transmission Reliability Program Peer Review included 8 sessions over 2 days on June 10 - 11, 2015, in Washington, DC. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Dan Trudnowski (Montana Tech), Bernie Lesieutre (U Wisconsin), Mani Venkatasubramanian (WSU) Session II: Jim Follum (PNNL), Mark Rice (PNNL), Paul Ewing (ORNL), Yilu Liu (ORNL)

  18. 2015 Transmission Reliability Program Peer Review - Day 2 Presentations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2 Presentations 2015 Transmission Reliability Program Peer Review - Day 2 Presentations The 2015 Transmission Reliability Program Peer Review included 8 sessions over 2 days on June 10 - 11, 2015, in Washington, DC. Presentations from Day 2 (Sessions V through VIII) are available below. Session V: Alejandro Dominguez-Garcia/Pete Sauer (U Illinois), Carlos Martinez (ASR), Song Xue (Electric Power Group) Session VI: Pavel Etingov (PNNL, two presentations), Bharat Bhargava

  19. 2016 Reliability & Markets Peer Review - Day 1 Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 1 Presentations 2016 Reliability & Markets Peer Review - Day 1 Presentations The Transmission Reliability R&D Reliability & Markets Peer Review included 6 sessions over 2 days on June 9 - 10, 2016. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Shmuel Oren, Eilyan Bitar, Anna Scalgione Session II: Alejandro Dominguez-Garcia, Kameshwar Poolla Session III: Ben Hobbs, Bill Schulze, Ray Zimmerman, Carlos Murillo-Sánchez Session IV: Lindsay

  20. 2016 Transmission Reliability Program Peer Review - Day 1 Presentations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1 Presentations 2016 Transmission Reliability Program Peer Review - Day 1 Presentations The 2016 Transmission Reliability Program Peer Review included 8 sessions over 2 days on June 7 - 8, 2016, in Washington, DC. Presentations from Day 1 (Sessions I through IV) are available below. Session I: Dan Trudnowski and John Pierre (Montana Tech), Bernie Lesieutre (U Wisconsin), Mani Venkatasubramanian (WSU) Session II: Brett Amidan (PNNL), Jeff Dagle (PNNL), Ruisheng Diao

  1. 2016 Transmission Reliability Program Peer Review - Day 2 Presentations |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2 Presentations 2016 Transmission Reliability Program Peer Review - Day 2 Presentations The 2016 Transmission Reliability Program Peer Review included 8 sessions over 2 days on June 7 - 8, 2016, in Washington, DC. Presentations from Day 2 (Sessions V through VI) are available below. Session V: Song Xue (Electric Power Grou), Brett Amidan (PNNL), Harold Kirkham (PNNL), Phil Irminger (ORNL) Session VI: Jianming Lian (PNNL), Alejandro Dominguez-Garcia and Pete Sauer (U

  2. States Celebrate National Weatherization Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4, 2014 - 11:37am Addthis Sates across the nation celebrated Weatherization Day on October 30 with guided tours and Gubernatorial proclamations. In this photo, A team of weatherization technicians perform a site demonstration in Minnesota on Weatherization Day in 2012. | Photo courtesy of WAPTAC. Sates across the nation celebrated Weatherization Day on October 30 with guided tours and Gubernatorial proclamations. In this photo, A team of weatherization technicians perform a site demonstration in

  3. T-596: 0-Day Windows Network Interception Configuration Vulnerability |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 96: 0-Day Windows Network Interception Configuration Vulnerability T-596: 0-Day Windows Network Interception Configuration Vulnerability April 6, 2011 - 5:48am Addthis PROBLEM: 0-Day exploit of IPv4 and IPv6 mechanics and how it applies to Microsoft Windows Operating systems. PLATFORM: Microsoft Operating Systems (OS) Windows Vista, Windows 7, and Windows 2008 Server ABSTRACT: The links below describe a parasitic IPv6 layered over a native IPv4 network. This attack can

  4. What To Bring On Your First Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Employee Orientation » What To Bring On Your First Day What To Bring On Your First Day What To Bring On Your First Day Unless otherwise directed, you should plan on reporting to the Main Lobby Visitor Area at your duty station by 8:30 a.m. on your first day of work. You will be greeted by an HR representative and escorted to the Entrance-On-Duty Orientation Session. In order to complete your in-processing into the Department of Energy, you must bring the following items and paperwork with

  5. National Day of Remembrance | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Day of Remembrance | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the...

  6. DayStar Solar LLC formerly International Energy Trading LLC ...

    Open Energy Info (EERE)

    LLC formerly International Energy Trading LLC Jump to: navigation, search Name: DayStar Solar LLC (formerly International Energy Trading LLC) Place: Grass Valley, California Zip:...

  7. AMO Industry Day Workshop on Upcoming Smart Manufacturing FOA

    Broader source: Energy.gov [DOE]

    AMO will host an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute on Smart Manufacturing.

  8. Green Week 2011 Day 4: NNSA Highlights Energy Efficient Vehicles...

    National Nuclear Security Administration (NNSA)

    Green Week 2011 Day 4: NNSA Highlights Energy Efficient Vehicles Throughout NNSA April 21, 2011 WASHINGTON, D.C. - This week, the National Nuclear Security Administration (NNSA) is ...

  9. World Cancer Day 2015: Not Beyond Us | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    World Cancer Day 2015: Not Beyond Us Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) World Cancer Day 2015: Not Beyond Us Mark Frontera 2015.02.05 Yesterday, Feb. 4, marked World Cancer Day, a day set aside each year to raise awareness about cancer worldwide. This year's theme, "not beyond us," speaks to the

  10. 2014 Advanced Grid Modeling Peer Review Presentations - Day Two...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modeling Peer Review Presentations - Day Two Afternoon Session The Office of Electricity Delivery and Energy Reliability held a peer review of the Advanced Grid Modeling ...

  11. 90-day Interim Report on Shale Gas Production - Secretary of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    whether both current and future production can be done in an environmentally sound fashion that meets the needs of public trust. This 90-day report presents recommendations...

  12. Day County, South Dakota: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    A. Places in Day County, South Dakota Andover, South Dakota Bristol, South Dakota Butler, South Dakota Grenville, South Dakota Lily, South Dakota Pierpont, South Dakota...

  13. Google Archives by Fiscal Year — Earth Day

    Broader source: Energy.gov [DOE]

    From the EERE Web Statistics Archive: Corporate sites, retired Google Analytics profiles for the Earth Day site for fiscal year 2012-13.

  14. Argonne Celebrates Earth Day 2013: It's Easy Being Green

    SciTech Connect (OSTI)

    Paul Kearns; Pam Sydelko; Ray Bair; Stephen Streiffer; Brian Stephenson;

    2013-04-17

    Argonne's April 23, 2013 Earth Day celebration featured "green" R&D conducted at the lab and interactive displays and fun activities that engage the laboratory community.

  15. Earth Day 2016 Photo Contest Entries | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conservation Community Alternative Power Energy Efficiency Climate Change Adaptation & Resilience This year's Earth Day Photo Contest had well over 150 entries. Our largest ...

  16. Bradbury Science Museum takes part in Smithsonian's Museum Day...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    25 Participating museums and cultural institutions across the nation open their doors free of charge to anyone presenting a Smithsonian Museum Day ticket. September 21, 2010...

  17. Museum Day at Bradbury Science Museum Sept. 24

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    24 Participating museums and cultural institutions across the nation open their doors free of charge to anyone presenting a Smithsonian magazine Museum Day ticket. September 19,...

  18. Bradbury Science Museum takes part in Smithsonian's Museum Day...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Museum Day September 26 Museums and cultural institutions open their doors free of charge to Smithsonian magazine subscribers and Smithsonian.com visitors. September...

  19. Cybersecurity Information Awareness Day Survival Guide and Checklist

    Broader source: Energy.gov [DOE]

    The Cybersecurity Information Awareness Day Survival Guide and Checklist was developed as a resource to assist organizations with planning and coordinating a cyber awareness event or campaign.

  20. Demonstration and Deployment Workshop - Day 2 Report Out | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Products danddworkshopproducts2.pdf (435.79 KB) More Documents & Publications Demonstration and Deployment Workshop - Day 1 Report Out Demonstration and Deployment Workshop - ...

  1. Demonstration and Deployment Workshop - Day 1 Report Out | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biochemistry Group danddworkshopbiochem.pdf (266.72 KB) More Documents & Publications Demonstration and Deployment Workshop - Day 1 Report Out Demonstration and Deployment ...

  2. Demonstration and Deployment Workshop - Day 2 Report Out | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Feedstocks danddworkshopfeedstocks2.pdf (434.61 KB) More Documents & Publications Demonstration and Deployment Workshop - Day 1 Report Out Demonstration and Deployment Workshop ...

  3. Demonstration and Deployment Workshop - Day 1 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategic Partnerships & Financing danddworkshopsluijs.pdf (1.39 MB) More Documents & Publications Demonstration and Deployment Workshop - Day 1 Report Out Demonstration and ...

  4. 2015 DOE Earth Day Reference Materials | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Day's 45th anniversary is on April 22, 2015. The celebration will showcase interactive, eco-friendly exhibits and activities to raise awareness of environmental issues and...

  5. DOE Headquarters Earth Day 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Day's 45th anniversary is on April 22, 2015. The celebration will showcase interactive, eco-friendly exhibits and activities to raise awareness of environmental issues and...

  6. Optima Stakeholder Listening Day Agenda | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon optimalisteningdayagenda.pdf More Documents & Publications Co-Optima Stakeholder Listening Day Summary Report Draft Agenda for U.S.-Africa Energy Ministerial Optima ...

  7. Argonne Celebrates Earth Day 2013: It's Easy Being Green

    ScienceCinema (OSTI)

    Paul Kearns; Pam Sydelko; Ray Bair; Stephen Streiffer; Brian Stephenson;

    2013-06-10

    Argonne's April 23, 2013 Earth Day celebration featured "green" R&D conducted at the lab and interactive displays and fun activities that engage the laboratory community.

  8. Secretary Moniz's Remarks at National Lab Day on the Hill --...

    Broader source: Energy.gov (indexed) [DOE]

    ... FY2015 Budget Request -- As Delivered SECRETARY MONIZ TO HOST NATIONAL LABORATORY DAY ON CAPITOL HILL Remarks by Secretary Moniz at the Summit on Improving the Economics of ...

  9. Energy Storage Systems 2006 Peer Review - Day 1 morning presentations...

    Office of Environmental Management (EM)

    morning presentations Energy Storage Systems 2006 Peer Review - Day 1 morning presentations ... of the Kauai Island Utility Cooperative System for Energy Storage Potential - Abbas ...

  10. Introduce a Girl to Engineering Day Registration | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    renowned engineers. We encourage all eligible participants to apply to "Introduce a Girl to Engineering Day". All applicants must be in eighth grade and need to complete the...

  11. DayStar Technologies Inc | Open Energy Information

    Open Energy Info (EERE)

    Technologies Inc Jump to: navigation, search Name: DayStar Technologies Inc Place: Santa Clara, California Zip: 95054 Product: US-based manufacturer of CIGS cells and modules....

  12. Secretary Moniz's First Pitch at Fenway for Earth Day

    Broader source: Energy.gov [DOE]

    On Earth Day, Secretary Moniz was invited to throw out the first pitch at a Red Sox game. Here's how it went.

  13. Resolving to Make Earth Day Last All Year

    Broader source: Energy.gov [DOE]

    With these resources, you'll be able to get your Earth Day energy campaign up and running in no time.

  14. 2012 Smart Grid Peer Review Presentations - Day 2 Morning Session...

    Broader source: Energy.gov (indexed) [DOE]

    Day 2 morning session are below. Moderator: Merrill Smith, DOE 2012 SG Peer Review - Recovery Act: Pacific Northwest Smart Grid Demonstration Project - Ron Melton, Battelle ...

  15. National Manufacturing Day October 2 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Manufacturing Day October 2 September 29, 2015 - 9:56am Addthis All over the country, manufacturing companies and other organizations are preparing to host an anticipated ...

  16. NEUTRON-INDUCED SWELLING OF Fe-Cr BINARY ALLOYS IN FFTF AT ~400 DEGREES C

    SciTech Connect (OSTI)

    Garner, Francis A.; Greenwood, Lawrence R.; Okita, Taira; Sekimura, Naoto; Wolfer, W. G.

    2002-12-31

    The purpose of this effort is to determine the influence of dpa rate, He/dpa ratio and composition on the void swelling of simple binary Fe-Cr alloys. Contrary to the behavior of swelling of model fcc Fe-Cr-Ni alloys irradiated in the same FFTF-MOTA experiment, model bcc Fe-Cr alloys do not exhibit a dependence of swelling on dpa rate at approximately 400 degrees C. This is surprising in that an apparent flux-sensitivity was observed in an earlier comparative irradiation of Fe-Cr binaries conducted in EBR-II and FFTF. The difference in behavior is ascribed to the higher helium generation rates of Fe-Cr alloys in EBR-II compared to that of FFTF, and also the fact that lower dpa rates in FFTF are accompanied by progressively lower helium generation rates.

  17. Nonhazardous solvent composition and method for cleaning metal surfaces

    DOE Patents [OSTI]

    Googin, John M.; Simandl, Ronald F.; Thompson, Lisa M.

    1993-01-01

    A solvent composition for displacing greasy and oily contaminants as well as water and/or aqueous residue from metallic surfaces, especially surfaces of radioactive materials so that such surfaces can be wiped clean of the displaced contaminants, water and/or aqueous residue. The solvent composition consists essentially of a blend of nonpolar aliphatic hydrocarbon solvent having a minimum flash point of about 140.degree. F. and 2 to 25 volume percent of a polar solvent having a flash point sufficiently high so as to provide the solvent composition with a minimum flash point of at least 140.degree. F. The solvent composition is nonhazardous so that when it is used to clean the surfaces of radioactive materials the waste in the form of paper or cloth wipes, lab coats and the like used in the cleaning operation is not considered to be mixed waste composed of a hazardous solvent and a radioactive material.

  18. Lanthanum-hexaboride carbon composition for use in corrosive hydrogen-fluorine environments

    DOE Patents [OSTI]

    Holcombe, Cressie E.; Kovach, Louis; Taylor, Albert J.

    1981-01-01

    The present invention relates to a structural composition useful in corrosive hydrogen-fluorine environments at temperatures in excess of 1400.degree. K. The composition is formed of a isostatically pressed and sintered or a hot-pressed mixture of lanthanum hexaboride particles and about 10-30 vol. % carbon. The lanthanum-hexaboride reacts with the high-temperature fluorine-containing bases to form an adherent layer of corrosion-inhibiting lanthanum trifluoride on exposed surfaces of the composition. The carbon in the composite significantly strengthens the composite, enhances thermal shock resistance, and significantly facilitates the machining of the composition.

  19. Ion processing element with composite media

    DOE Patents [OSTI]

    Mann, Nick R.; Tranter, Troy J.; Todd, Terry A.; Sebesta, Ferdinand

    2003-02-04

    An ion processing element employing composite media disposed in a porous substrate, for facilitating removal of selected chemical species from a fluid stream. The ion processing element includes a porous fibrous glass substrate impregnated by composite media having one or more active components supported by a matrix material of polyacrylonitrile. The active components are effective in removing, by various mechanisms, one or more constituents from a fluid stream passing through the ion processing element. Due to the porosity and large surface area of both the composite medium and the substrate in which it is disposed, a high degree of contact is achieved between the active component and the fluid stream being processed. Further, the porosity of the matrix material and the substrate facilitates use of the ion processing element in high volume applications where it is desired to effectively process a high volume flows.

  20. Ion processing element with composite media

    DOE Patents [OSTI]

    Mann, Nick R.; Tranter, Troy J.; Todd, Terry A.; Sebesta, Ferdinand

    2009-03-24

    An ion processing element employing composite media disposed in a porous substrate, for facilitating removal of selected chemical species from a fluid stream. The ion processing element includes a porous fibrous glass substrate impregnated by composite media having one or more active components supported by a matrix material of polyacrylonitrile. The active components are effective in removing, by various mechanisms, one or more constituents from a fluid stream passing through the ion processing element. Due to the porosity and large surface area of both the composite medium and the substrate in which it is disposed, a high degree of contact is achieved between the active component and the fluid stream being processed. Further, the porosity of the matrix material and the substrate facilitates use of the ion processing element in high volume applications where it is desired to effectively process a high volume flows.

  1. U.S. monthly oil production tops 8 million barrels per day for the first time since 1988

    U.S. Energy Information Administration (EIA) Indexed Site

    Residential electricity consumption this summer expected to be higher than last year Electricity use among U.S. households is expected to be about 1 percent higher this summer compared to last year. In its new short-term energy forecast, the U.S. Energy Information Administration says a nearly 6% increase in cooling degree days expected this summer will be slightly offset by more efficient air conditioning, lighting, and other appliances that use less electricity. The 1 percent rise in summer

  2. High impact resistant ceramic composite

    DOE Patents [OSTI]

    Derkacy, James A.

    1991-07-16

    A ceramic material and a method of forming a ceramic material which possesses a high impact resistance. The material comprises: (a) a first continuous phase of .beta.-SiC; and (b) a second phase of about 25-40 vol % TiB.sub.2. Al.sub.2 O.sub.3 is preferably used as a densification aid. The material is formed by hot-pressing the mixture at a temperature from greater than about 1800.degree. C. to less than the transition temperature of .beta.-SiC to .alpha.-SiC. The hot-pressing is performed at a pressure of about 2000 psi to about 4000 psi in an inert atmosphere for several hours and results in the formation of a two phase sintered ceramic composite material.

  3. Heteroporphyrin nanotubes and composites

    DOE Patents [OSTI]

    Shelnutt, John A.; Medforth, Craig J.; Wang, Zhongchun

    2007-05-29

    Heteroporphyrin nanotubes, metal nanostructures, and metal/porphyrin-nanotube composite nanostructures formed using the nanotubes as photocatalysts and structural templates, and the methods for forming the nanotubes and composites.

  4. Heteroporphyrin nanotubes and composites

    DOE Patents [OSTI]

    Shelnutt, John A.; Medforth, Craig J.; Wang, Zhongchun

    2006-11-07

    Heteroporphyrin nanotubes, metal nanostructures, and metal/porphyrin-nanotube composite nanostructures formed using the nanotubes as photocatalysts and structural templates, and the methods for forming the nanotubes and composites.

  5. Composition for use in high-temperature hydrogen-fluorine environments and method for making the composition

    DOE Patents [OSTI]

    Kovach, Louis; Holcombe, Cressie E.

    1982-01-01

    The present invention relates to a composition particularly suitable for as structural components subject to high-temperature environments containing gaseous hydrogen and fluorine. The composition of the present invention consists essentially of lanthanum hexaboride-molybdenum diboride with dispersed silicon. The composition is formed by hot pressing a powder mixture of lanthanum hexaboride as the major constituent and molybdenum disilicide. This composition exhibits substantial resistance to thermal shock and corrosion in environments containing hydrogen and fluorine gases at material surface temperatures up to about 1850.degree. K. Upon exposure of the hot-pressed composition to high-temperature environments containing fluorine gases, a highly protective layer of lanthanum trifluoride containing dispersed molybdenum is formed on exposed surfaces of the composition.

  6. Amorphous metal composites

    DOE Patents [OSTI]

    Byrne, Martin A. (Troy, NY); Lupinski, John H. (Scotia, NY)

    1984-01-01

    An improved amorphous metal composite and process of making the composite. The amorphous metal composite comprises amorphous metal (e.g. iron) and a low molecular weight thermosetting polymer binder. The process comprises placing an amorphous metal in particulate form and a thermosetting polymer binder powder into a container, mixing these materials, and applying heat and pressure to convert the mixture into an amorphous metal composite.

  7. Thermoset molecular composites

    DOE Patents [OSTI]

    Benicewicz, Brian C.; Douglas, Elliot P.; Hjelm, Jr., Rex P.

    1996-01-01

    A polymeric composition including a liquid crystalline polymer and a thermosettable liquid crystalline monomer matrix, said polymeric composition characterized by a phase separation on the scale of less than about 500 Angstroms and a polymeric composition including a liquid crystalline polymer and a liquid crystalline thermoset matrix, said polymeric composition characterized by a phase separation on the scale of less than about 500 Angstroms are disclosed.

  8. Arylene fluorinated sulfonimide compositions

    DOE Patents [OSTI]

    Teasley, Mark F.

    2010-11-23

    Described herein are aromatic sulfonimide compositions that can be used to prepare polymers useful as membranes in electrochemical cells.

  9. Composite fuel cell membranes

    DOE Patents [OSTI]

    Plowman, Keith R. (Lake Jackson, TX); Rehg, Timothy J. (Lake Jackson, TX); Davis, Larry W. (West Columbia, TX); Carl, William P. (Marble Falls, TX); Cisar, Alan J. (Cypress, TX); Eastland, Charles S. (West Columbia, TX)

    1997-01-01

    A bilayer or trilayer composite ion exchange membrane suitable for use in a fuel cell. The composite membrane has a high equivalent weight thick layer in order to provide sufficient strength and low equivalent weight surface layers for improved electrical performance in a fuel cell. In use, the composite membrane is provided with electrode surface layers. The composite membrane can be composed of a sulfonic fluoropolymer in both core and surface layers.

  10. Composite fuel cell membranes

    DOE Patents [OSTI]

    Plowman, K.R.; Rehg, T.J.; Davis, L.W.; Carl, W.P.; Cisar, A.J.; Eastland, C.S.

    1997-08-05

    A bilayer or trilayer composite ion exchange membrane is described suitable for use in a fuel cell. The composite membrane has a high equivalent weight thick layer in order to provide sufficient strength and low equivalent weight surface layers for improved electrical performance in a fuel cell. In use, the composite membrane is provided with electrode surface layers. The composite membrane can be composed of a sulfonic fluoropolymer in both core and surface layers.

  11. Nano-composite materials

    DOE Patents [OSTI]

    Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland

    2010-05-25

    Nano-composite materials are disclosed. An exemplary method of producing a nano-composite material may comprise co-sputtering a transition metal and a refractory metal in a reactive atmosphere. The method may also comprise co-depositing a transition metal and a refractory metal composite structure on a substrate. The method may further comprise thermally annealing the deposited transition metal and refractory metal composite structure in a reactive atmosphere.

  12. Fiber Reinforced Composite Pipelines

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Rawls Savannah River National Laboratory This presentation does not contain proprietary, confidential, or otherwise restricted information Fiber Reinforced Composite Pipelines ...

  13. Scattering of particles with internal degrees of freedom

    SciTech Connect (OSTI)

    Slipushenko, S. V.; Tur, A. V.; Yanovsky, V. V.

    2013-08-15

    The scattering of particles with a small number of internal degrees of freedom is considered. Billiard formalism is used to study the scattering of two such structurally complex particles. The main scattering characteristics are found. Various types of scattering modes are revealed. In particular, a mode is detected when the velocity of motion of such particles away from each other is higher than their approach velocity before the collision. The scattering of such particles is shown to occur after a finite number of collisions. A generalized Newton law is proposed for the collision of particles with a small number of degrees of freedom, and the form of the effective coefficient of restitution is found.

  14. Six-degree-of-freedom multi-axes positioning apparatus

    DOE Patents [OSTI]

    Bieg, L.F.X.

    1999-05-11

    A six-degree-of-freedom multi-axes positioning apparatus is comprised of a geometry of six independent angle connectors. Each angle connector connects two fixed length rods to a pivot on one of two opposing platforms. The combination of an angle connector, at least two pivots and at least two rods having free ends connected to the pivots comprises a leg assembly. The spatial location of the upper platform is changed in relation to the lower platform by angular changes within each angle connector. This angular change results in degrees of motion within the apparatus defined as X, Y, Z, Tip, Tilt, and Rotation, or a combination of the above. This invention is known as a ROTOPOD. 9 figs.

  15. Six-degree-of-freedom multi-axes positioning apparatus

    DOE Patents [OSTI]

    Bieg, Lothar F. X.

    1999-01-01

    A six-degree-of-freedom multi-axes positioning apparatus is comprised of a geometry of six independent angle connectors. Each angle connector connects two fixed length rods to a pivot on one of two opposing platforms. The combination of an angle connector, at least two pivots and at least two rods having free ends connected to the pivots comprises a leg assembly. The spatial location of the upper platform is changed in relation to the lower platform by angular changes within each angle connector. This angular change results in degrees of motion within the apparatus defined as X, Y, Z, Tip, Tilt, and Rotation, or a combination of the above. This invention is known as a ROTOPOD.

  16. Final Scientific Report, New Proton Conductive Composite Materials for PEM Fuel Cells

    SciTech Connect (OSTI)

    Lvov, Serguei

    2010-11-08

    This project covered one of the main challenges in present-day PEM fuel cell technology: to design a membrane capable of maintaining high conductivity and mechanical integrity when temperature is elevated and water vapor pressure is severely reduced. The DOE conductivity milestone of 0.1 S cm-1 at 120 degrees C and 50 % relative humidity (RH) for designed membranes addressed the target for the project. Our approach presumed to develop a composite membrane with hydrophilic proton-conductive inorganic material and the proton conductive polymeric matrix that is able to “bridge” the conduction paths in the membrane. The unique aspect of our approach was the use of highly functionalized inorganic additives to benefit from their water retention properties and high conductivity as well. A promising result turns out that highly hydrophilic phosphorsilicate gels added in Nafion matrix improved PEM fuel cell performance by over 50% compared with bare Nafion membrane at 120 degrees C and 50 % RH. This achievement realizes that the fuel cell operating pressure can be kept low, which would make the PEM fuel cell much more cost efficient and adaptable to practical operating conditions and facilitate its faster commercialization particularly in automotive and stationary applications.

  17. An algorithmic calibration approach to identify globally optimal parameters for constraining the DayCent model

    SciTech Connect (OSTI)

    Rafique, Rashid; Kumar, Sandeep; Luo, Yiqi; Kiely, Gerard; Asrar, Ghassem R.

    2015-02-01

    he accurate calibration of complex biogeochemical models is essential for the robust estimation of soil greenhouse gases (GHG) as well as other environmental conditions and parameters that are used in research and policy decisions. DayCent is a popular biogeochemical model used both nationally and internationally for this purpose. Despite DayCent’s popularity, its complex parameter estimation is often based on experts’ knowledge which is somewhat subjective. In this study we used the inverse modelling parameter estimation software (PEST), to calibrate the DayCent model based on sensitivity and identifi- ability analysis. Using previously published N2 O and crop yield data as a basis of our calibration approach, we found that half of the 140 parameters used in this study were the primary drivers of calibration dif- ferences (i.e. the most sensitive) and the remaining parameters could not be identified given the data set and parameter ranges we used in this study. The post calibration results showed improvement over the pre-calibration parameter set based on, a decrease in residual differences 79% for N2O fluxes and 84% for crop yield, and an increase in coefficient of determination 63% for N2O fluxes and 72% for corn yield. The results of our study suggest that future studies need to better characterize germination tem- perature, number of degree-days and temperature dependency of plant growth; these processes were highly sensitive and could not be adequately constrained by the data used in our study. Furthermore, the sensitivity and identifiability analysis was helpful in providing deeper insight for important processes and associated parameters that can lead to further improvement in calibration of DayCent model.

  18. ORISE: Nuclear engineering degrees at highest ranges since 1980s

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ORISE report shows graduation, enrollment rates for nuclear engineering candidates are still at highest ranges reported since 1980s Report also shows shifts in career opportunities beyond graduation in nuclear utilities FOR IMMEDIATE RELEASE Nov. 2, 2011 FY12-04 OAK RIDGE, Tenn.-After a one-year decline, the number of graduate and undergraduate nuclear engineering degrees earned in the United States bounced back in 2010. A recent report from the Oak Ridge Institute for Science and Education

  19. Microsoft Word - VI_13_Degrees Awarded 2016.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    STUDENTS WHO RECEIVED GRADUATE DEGREES FROM THESIS WORK CONDUCTED AT THE CYCLOTRON INSTITUTE April 1, 2015 - March 31, 2016 Name Year Thesis Title Advisor Present Position Paul Cammarata 2015 Ternary breaking of the reaction systems in heavy- ion collisions below the Fermi energy S.J. Yennello Senior Analyzer Sytem Engineer, Dow Chemical, Houston Texas Michael Simon Mehlman 2015 Development of TAMUTRAP beam line, RFQ, and ion traps for precision β-decay studies D. Melconian Scientist, Exponent

  20. Grain boundary energy in 5 degrees of freedom space

    Energy Science and Technology Software Center (OSTI)

    2012-09-21

    GB5DOF is a program written in MatLab for computing excess energy of an arbitrary grain boundary defined by its 5 geometrical degrees of freedom. The program is written in the form of a single self-contained function callable from within commercially available MatLab software package. The function takes a geometric description of the boundary and material identity as input parameters and returns the predicted boundary energy.

  1. Solid polymer electrolyte compositions

    DOE Patents [OSTI]

    Garbe, James E.; Atanasoski, Radoslav; Hamrock, Steven J.; Le, Dinh Ba

    2001-01-01

    An electrolyte composition is featured that includes a solid, ionically conductive polymer, organically modified oxide particles that include organic groups covalently bonded to the oxide particles, and an alkali metal salt. The electrolyte composition is free of lithiated zeolite. The invention also features cells that incorporate the electrolyte composition.

  2. Phase change compositions

    DOE Patents [OSTI]

    Salyer, Ival O.; Griffen, Charles W.

    1986-01-01

    Compositions containing crystalline, long chain, alkyl hydrocarbons as phase change materials including cementitious compositions containing the alkyl hydrocarbons neat or in pellets or granules formed by incorporating the alkyl hydrocarbons in polymers or rubbers; and polymeric or elastomeric compositions containing alkyl hydrocarbons.

  3. Phase change compositions

    DOE Patents [OSTI]

    Salyer, Ival O.

    1989-01-01

    Compositions containing crystalline, straight chain, alkyl hydrocarbons as phase change materials including cementitious compositions containing the alkyl hydrocarbons neat or in pellets or granules formed by incorporating the alkyl hydrocarbons in polymers or rubbers; and polymeric or elastomeric compositions containing alkyl hydrocarbons.

  4. Children join nuclear security enterprise for the day | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Children join nuclear security enterprise for the day Friday, April 29, 2016 - 3:14pm What do you want to be when you grow up, the NNSA scientists asked. "An astrophysicist!" NNSA employees' children joined the team for the day at NNSA's office in Germantown, Md. The NNSA team got a lot bigger, and younger - at least for one day - as employees' 5th- to 12th-grade children accompanied them to work for "Take your Daughters and Sons to Work

  5. Statement from Secretary Moniz on Implementation Day for the Joint

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Comprehensive Plan of Action | Department of Energy Statement from Secretary Moniz on Implementation Day for the Joint Comprehensive Plan of Action Statement from Secretary Moniz on Implementation Day for the Joint Comprehensive Plan of Action January 16, 2016 - 5:07pm Addthis News Media Contact (202) 586-4940 DOENews@hq.doe.gov Implementation Day is a milestone in the effort to ensure that Iran's nuclear program is exclusively peaceful in nature by blocking potential pathways to a bomb. As

  6. 2014 Reliability & Markets Peer Review - Day 2 Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 2 Presentations 2014 Reliability & Markets Peer Review - Day 2 Presentations The Transmission Reliability R&D Reliability & Markets Peer Review included 6 sessions over 2 days on August 5 - 6, 2014. Presentations from Day 2 (Sessions V and VI) are available below. Session V: Shmuel Oren, HyungSeon Oh, Tom Overbye Session VI: Dan Tylavsky, Eilyan Bitar 2014 R&M Peer Review - Business Model for Retail Aggregation of Responsive Load - Shmuel Oren (1.19 MB) 2014 R&M

  7. 2015 Reliability & Markets Peer Review - Day 2 Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 2 Presentations 2015 Reliability & Markets Peer Review - Day 2 Presentations The Transmission Reliability R&D Reliability & Markets Peer Review included 6 sessions over 2 days on August 4 - 5, 2015. Presentations from Day 2 (Sessions V through VI) are available below. Session V: Ray Zimmerman, Hsiao-Dong Chiang, Lindsay Anderson Session VI: HyungSeon Oh, Dan Tylavsky 2015 R&M Peer Review - Development and testing of tools - Ray Zimmerman (7.45 MB) 2015 R&M Peer

  8. 2016 Reliability & Markets Peer Review - Day 2 Presentations | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 2 Presentations 2016 Reliability & Markets Peer Review - Day 2 Presentations The Transmission Reliability R&D Reliability & Markets Peer Review included 6 sessions over 2 days on June 9 - 10, 2016. Presentations from Day 2 (Sessions V through VI) are available below. Session V: Zhifang Wang, Lang Ton, Tom Overbye Session VI: HyungSeon Oh, Kory Hedman 11. Wang Random Topology Power Grid Modeling.pdf (1.2 MB) 12. Tong Probablistic Forecasting.pdf (3.19 MB) 14. Oh Global

  9. Join the Bradbury at an Earth Day event

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Join the Bradbury at an Earth Day event Join the Bradbury at an Earth Day event WHEN: Apr 23, 2016 10:00 AM - 2:00 PM WHERE: Los Alamos Nature Center (PEEC) 2600 Canyon Road, Los Alamos, NM 87544, USA CONTACT: Linda Anderman (505) 665-9196 CATEGORY: Bradbury INTERNAL: Calendar Login Event Description Nature owes some of its bright colors (think iridescent peacock feathers) to thin films In addition to other Lab representatives at the Pajarito Environmental Education Center (PEEC) for Earth Day,

  10. Sunrayce 97 Continues Day 2 - Terre Haute to Godfrey

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 - Terre Haute to Godfrey For more information contact: Patrick Booher, Sunrayce Program Manager (202) 586-0713 Godfrey, Ill., June 20, 1997 -- George Washington University's team took Day II and the overall lead as Sunrayce 97 completed its second day of running. Their elapsed time for the day was 4:10:31. Second place went to Massachusetts Institute of Technology, 4:11:27. The two teams are neck-in-neck with only 11 seconds separating them in the overall standings. In third place is

  11. Sunrayce 97 Continues Day 3 - Godfrey to Fulton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 - Godfrey to Fulton For more information contact: Patrick Booher, Sunrayce Program Manager (202) 586-0713 Fulton, Mo., June 21, 1997 -- Massachusetts Institute of Technology (MIT) took Day III and the overall lead as Sunrayce 97 completed its third day of running. The elapsed time for the day for the Manta GT was 4:04:30. Second place went to California State University - Los Angeles, 4:06:37. The two teams are still neck-in-neck with only 15:38 separating them in the overall standings.

  12. Sunrayce 97 Continues Day 4 - Fulton to Lee's Summit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 - Fulton to Lee's Summit For more information contact: Patrick Booher, Sunrayce Program Manager (202) 586-0713 Lee's Summit, MO -- Massachusetts Institute of Technology (MIT) took Day IV and maintained the overall lead as sunrayce 97 completed its fourth day. The elapsed time for the day for the Manta GT was 3:26:45. Second place went to University of Waterloo, 3:29:02. University of Minnesota came in third place with a time of 3:31:24. According to Pat Booher, Sunrayce 97 Co-Director,

  13. ChemCam all-women's operations day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ChemCam all-women's operations day ChemCam all-women's operations day The Mars Curiosity Rover celebrated one year on the Red Planet, and to commemorate the event, ChemCam team members had an all-women operations day. June 30, 2014 Pictured from left to right are Cindy Little, Agnes Cousin, Nina Lanza, Dot Delapp and Hannah Pagel. Pictured from left to right are Cindy Little, Agnes Cousin, Nina Lanza, Dot Delapp and Hannah Pagel. ChemCam has played a crucial role in many of the rover's

  14. Video: Secretary Moniz's First Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Video: Secretary Moniz's First Day Video: Secretary Moniz's First Day May 22, 2013 - 2:26pm Addthis On his first day of work, Secretary Moniz attends his swearing-in ceremony, and he delivers remarks at the 2013 Energy Efficiency Global Forum. Rob Roberts Rob Roberts Former Director of Digital Strategy On May 22, Dr. Ernest Moniz was sworn in as the nation's 13th Secretary of Energy and spoke about his vision for the Department's future. Afterwards, employees had a chance after the ceremony to

  15. Celebrate Earth Day with Secretary Chu | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Celebrate Earth Day with Secretary Chu Celebrate Earth Day with Secretary Chu April 16, 2012 - 5:51pm Q&A What would you ask Secretary Chu about the environmental benefits of transitioning to a clean energy economy? Ask Us Addthis Celebrate Earth Day with Secretary Chu Amanda Scott Amanda Scott Former Managing Editor, Energy.gov How can I participate? Tweet questions @energy with the hashtag #AskEnergy. Email questions to newmedia@hq.doe.gov. This Friday, April 20, at 10:45am ET, join us for

  16. John Day Basin Spring Chinook Salmon Escapement and Productivity Monitoring; Fish Research Project Oregon, 2000-2001 Annual Report.

    SciTech Connect (OSTI)

    Carmichael, Richard W.; Claire, Glenda M.; Seals, Jason

    2002-01-01

    The four objectives of this report are: (1) Estimate annual spawner escapement and number of spring chinook salmon redds in the John Day River basin; (2) Determine sex ratio, age composition, length-at-age of spawners, and proportion of natural spawners that are hatchery origin strays; (3) Determine adequacy of historic index surveys for indexing spawner abundance and for detecting changes in spawner distribution through time; and (4) Estimate smolt-to-adult survival for spring chinook salmon emigrating from the John Day River basin.

  17. Contribution of counterions and degree of ionization for birefringence creation and relaxation kinetics parameters of PAH/PAZO films

    SciTech Connect (OSTI)

    Raposo, Maria Monteiro Timóteo, Ana Rita; Ribeiro, Paulo A.; Ferreira, Quirina; Botelho do Rego, Ana Maria

    2015-09-21

    Photo induced birefringent materials can be used to develop optical and conversion energy devices, and consequently, the study of the variables that influences the creation and relaxation of birefringence should be carefully analyzed. In this work, the parameters of birefringence creation and relaxation kinetics curves obtained on layer-by-layer (LBL) films, prepared from azo-polyectrolyte poly[1-[4-(3-carboxy-4 hydroxyphenylazo) benzene sulfonamido]-1,2-ethanediyl, sodium salt] (PAZO) and poly(allylamine hydrochloride)(PAH), are related with the presence of counterions and the degree of ionization of the polyelectrolytes. Those kinetics curves obtained on PAH/PAZO LBL films, prepared from PAH solutions with different pHs and maintaining the pH of PAZO solution constant at pH = 9, were analyzed taking into account the films composition which was characterized by X-ray photoelectron spectroscopy. The creation and relaxation birefringence curves are justified by two processes: one associated to local mobility of the azobenzene with a characteristic time 30 s and intensity constant and other associated with polymeric chains mobility with the characteristic time and intensity decreasing with pH. These results allow us to conclude that the birefringence creation process, associated to local mobility of azobenzenes is independent of the degree of ionization and of number of counterions or co-ions present while the birefringence creation process associated to mobility of chains have its characteristic time and intensity dependent of both degree of ionization and number of counterions. The birefringence relaxation processes are dependent of the degree of ionization. The analysis of the films composition revealed, in addition, the presence of a protonated secondary or tertiary amine revealing that PAZO may have positive charges and consequently a zwitterionic behavior.

  18. Early Days of Coal Research | Department of Energy

    Energy Savers [EERE]

    Early Days of Coal Research Wartime Needs Spur Interest in Coal-to-Oil Processes In 1944 ... Oil was in tight supply in the United States during the war years. As demand for petroleum ...

  19. Co-Optima Stakeholder Listening Day Summary Report (Technical...

    Office of Scientific and Technical Information (OSTI)

    In FY 2015, DOE invited industry stakeholders to the listening day to obtain critical input on the opportunities and challenges of this effort. The meeting was held in Golden, ...

  20. Why We Fight -- Celebrating Women's Equality Day | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Why We Fight -- Celebrating Women's Equality Day August 26, 2013 - 12:07pm Addthis Our ... we watch more women than men go to college, excel academically and enter the labor pool. ...

  1. Sunrayce 97 Continues Day 5 - Lee's Summit to Manhattan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    said Tom Sheffler, Sunrayce 97 Co-Director. "After a rest day yesterday, everyone was ready to go today" he said, "Hearing the crowds cheer the teams on was certainly gratifying." ...

  2. World Toilet Day: Celebrate Sanitation and Efficient Flushing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Calculate how much your family could save. Learn more about World Toilet Day. Also check out some tips for saving water, and the best practices for managing toilets and urinals at ...

  3. How Are You Celebrating Earth Day? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    this month, to save energy and money? If you're looking for ideas, check out the Office of Energy Efficiency and Renewable Energy's Earth Day website for energy saving ideas, or ...

  4. Submit Your Home Energy Efficiency Questions Now for Earth Day...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Saver for tips and advice on ways to save energy and money. Addthis Related Articles This Earth Day, Get Your Energy-Saving Questions Answered Submit Your Home Energy ...

  5. 2016 Navajo Nation Economic Summit & Business Opportunity Day

    Broader source: Energy.gov [DOE]

    The 2016 Navajo Nation Economic Summit and Business Opportunity Day will include contract opportunities, matchmaking, one-on-one with buyers and purchasing agencies, network and evening banquet, and over 24 session topics. Conference registration ends April 5.

  6. 2012 Smart Grid Peer Review Presentations - Day 2 Smart Grid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sullivan, NC State University (1.5 MB) 2012 SG Peer Review - Day 2 Panel Discussion: Matt Wakefield, EPRI (1.41 MB) More Documents & Publications Smart Grid Characteristics, ...

  7. Dr. Googin and his early days at Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Young college graduate, John Googin, arrived in Oak Ridge on a "warm day in May of 1944." This is how he began his Manhattan Project autobiography as first published in the Y-12...

  8. 2013 Civic Hacking Day Ideas | OpenEI Community

    Open Energy Info (EERE)

    2013 Civic Hacking Day Ideas Home > Groups > Utility Rate Rmckeel's picture Submitted by Rmckeel(297) Contributor 19 April, 2013 - 13:44 Apps challenge hackathon The folks at Rally...

  9. National Day of Civic Hacking | OpenEI Community

    Open Energy Info (EERE)

    National Day of Civic Hacking Home > Blogs > Graham7781's blog Graham7781's picture Submitted by Graham7781(2017) Super contributor 14 April, 2014 - 09:48 code community data Event...

  10. Energy Storage Systems 2012 Peer Review Presentations - Day 2...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Energy Storage Systems 2012 Peer Review Presentations - Day 2, Session 1 The U.S. DOE ... ESS 2012 Peer Review - Nitrogen-Oxygen Battery for Large Scale Energy Storage - Frank ...

  11. Happy Earth Day from the Office of Nuclear Energy

    Broader source: Energy.gov [DOE]

    This Earth Day I want to take the opportunity to reflect on some of the ways the Office of Nuclear Energy has been working to innovate nuclear technologies, with the goals of supporting U.S. low...

  12. Career Day Recap - Summer 2016 Cyclotron Institute REU Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REU Career Day List of Speakers (with and links to presentations if available) Dr. Henry Clark Dr. Ellen McCleskey Dr. Tye Botting Dr. Peter McIntyre Dr. Mark Zoran

  13. Sustainable Transportation Day 2015 at the Energy Department

    Broader source: Energy.gov [DOE]

    Energy Department-supported technologies such as the Freightliner SuperTruck, 3D-printed Shelby Cobra and fuel cell vehicles were on display outside our headquarters as part of Sustainable Transportation Day on Monday, June 22, 2015.

  14. Energy Storage Systems 2012 Peer Review Presentations - Day 3...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Energy Storage Systems 2012 Peer Review Presentations - Day 3, Session 1 The U.S. DOE Energy Storage Systems Program (ESS) conducted a peer review and update meeting in ...

  15. Energy Storage Systems 2012 Peer Review Presentations - Day 3...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Energy Storage Systems 2012 Peer Review Presentations - Day 3, Session 3 The U.S. DOE Energy Storage Systems Program (ESS) conducted a peer review and update meeting in ...

  16. Co-Optima Stakeholder Listening Day Summary Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report is based on the proceedings of the Co-Optimization of Fuels and Engines (Co-Optima) Stakeholder Listening Day, held on June 16–17, 2015, in Golden, Colorado

  17. Energy Storage Systems 2006 Peer Review - Day 1 afternoon presentation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    afternoon presentations Energy Storage Systems 2006 Peer Review - Day 1 afternoon ... Compact SiC-based Power Converter System - Timothy Lin, Aegis.pdf (1.72 MB) ESS ...

  18. Green Week 2011 Day 2: NNSA Highlights Green Science Innovations...

    National Nuclear Security Administration (NNSA)

    Each day, the NNSA Green Week website will focus on a different set of stories that highlight the connection between NNSA's commitment to energy efficiency and its efforts to ...

  19. Co-Optima Stakeholder Listening Day | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    The U.S. Department of Energy's (DOE's) Bioenergy Technologies Office (BETO) and Vehicle Technologies Office (VTO) co-hosted the Optima Stakeholder Listening Day on June 16-17, ...

  20. Remembering the long day's journey to a historic machine's Christmas...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The day-and-night-long effort produced a stopped clock, a critical machine part tied ... An unplugged command-post clock As time dragged on, PPPL Director Harold Furth decided to ...

  1. 2012 Smart Grid Peer Review Presentations - Day 1 Afternoon Session...

    Broader source: Energy.gov (indexed) [DOE]

    Day 1 afternoon sessions are below. Moderators: Eric Lightner and Merrill Smith 2012 SG Peer Review - GridWise Architecture Council - Ron Melton, PNNL (493.9 KB) 2012 SG Peer ...

  2. MINEQL-EIR. Chemical Equilibrium Composition of Aqueous Systems

    SciTech Connect (OSTI)

    Westall, J.C.; Zachary, J.L.; Morel, F.M.M; Schweingruber, M.

    1986-11-21

    MINEQL is a subroutine package to calculate equilibrium composition of an aqueous system, accounting for mass transfer. MINEQL-EIR contains an additional base on enthalpy and heat capacity data and has the option to do calculations at temperatures different from 25 degrees C.

  3. Jobs Day and Nuclear Risk Insurance Announcement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Jobs Day and Nuclear Risk Insurance Announcement Jobs Day and Nuclear Risk Insurance Announcement August 4, 2006 - 8:41am Addthis Prepared Remarks for Energy Secretary Bodman Thank you all for being here and thanks, Mike, for that very nice introduction and for the tour of your transmission control center. I also want to thank Southern Company and Georgia Power for arranging this event and I appreciate Lauren Walker from Governor Perdue's office and Derick Corbett from Congressman Linder's

  4. Energy Savings Performance Contracting One-Day Workshop (Providence, RI) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Energy Savings Performance Contracting One-Day Workshop (Providence, RI) Energy Savings Performance Contracting One-Day Workshop (Providence, RI) August 8, 2016 8:00AM to 4:00PM EDT Workshop provides an introductory overview of the fundamentals of energy savings performance contracting (ESPC). Students will interact with instructors who are experts in contracting and the technical aspects of project development. Registration is open to U.S. federal employees. Attendees

  5. Lab to host second annual LDRD Day September 8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Second annual LDRD Day Lab to host second annual LDRD Day September 8 The event provides an opportunity for people to see some of the most exciting research currently underway at the Laboratory. September 2, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National

  6. SUSTAINABILITY NEWS DOE HQ Celebrates Earth Day 2013

    Energy Savers [EERE]

    DOE HQ Celebrates Earth Day 2013 DOE headquarters is celebrating Earth Day 2013 (April 22) with a full week of festivities. Events will be held April 22-25 at the Forrestal building and April 29-May 2 at the Germantown building. Activities include a photo contest, an environmental film series, a showcase of alternative fuel vehicles, and displays from green exhibitors. For more information and a list of events, visit DOE Earth Week's Powerpedia page at https://

  7. 2012 Smart Grid Peer Review Presentations - Day 1 Morning Session |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Morning Session 2012 Smart Grid Peer Review Presentations - Day 1 Morning Session The Office of Electricity Delivery and Energy Reliability held its bi-annual peer review of the Smart Grid Research and Development Program on June 7-8, 2012. More than 30 projects were presented at San Diego Gas & Electric's Energy Innovation Center. Presentations from the Day 1 morning session are below. Moderator: Dan Ton, DOE 2012 SG Peer Review - Smart Inverter Controls and

  8. Introduce a Girl to Engineering Day Registration | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Contact education@anl.gov Introduce a Girl to Engineering Day Registration Participants are given the opportunity to explore a career in engineering through hands on activities and talking to Argonne's renowned engineers. We encourage all eligible participants to apply to "Introduce a Girl to Engineering Day". All applicants must be in eighth grade and need to complete the online application. Space for the event is limited and participants will be selected by a lottery

  9. States Celebrate National Weatherization Day | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    25, 2015 - 12:20pm Addthis West Plains, Missouri, Mayor Jack Pahlmann issued a proclamation recognizing National Weatherization Day on Oct. 30. Here, the Mayor (in sport coat and red shirt) presents his proclamation at a West Plains home undergoing weatherization. Weatherization funding for the home comes, in part, from the U.S. Department of Energy. West Plains, Missouri, Mayor Jack Pahlmann issued a proclamation recognizing National Weatherization Day on Oct. 30. Here, the Mayor (in sport coat

  10. ARM - Publications: Science Team Meeting Documents: Day and Night cloud

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fraction - Cloud Inter-Compariosn IOP results Day and Night cloud fraction - Cloud Inter-Compariosn IOP results Genkova, Iliana University of Illinois-Champaign Long, Chuck Pacific Northwest National Laboratory Turner, David Pacific Northwest National Laboratory We present results from the CIC IOP from March-may, 2003. Day time and night time cloud fraction retrieval algorithms have been presented and intercompared. Amount of low, middle and high cloud have been estimated and compared to

  11. Co-Optima Stakeholder Listening Day Summary Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optima Stakeholder Listening Day Summary Report Sponsored jointly by the Vehicle Technologies Office and the Bioenergy Technologies Office Hosted by the National Renewable Energy Laboratory June 16-17, 2015 Golden, Colorado CO-OPTIMA STAKEHOLDER LISTENING DAY SUMMARY REPORT Disclaimer This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty,

  12. Modelling economic losses of historic and present-day high-impact winter windstorms in Switzerland

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Welker, Christoph; Martius, Olivia; Stucki, Peter; Bresch, David; Dierer, Silke; Bronnimann, Stefan

    2016-03-30

    This study investigates the wind gusts and associated economic loss patterns of high-impact winter windstorms in Switzerland between 1871 and 2011. A novel approach for simulating windstorm-related gusts and losses at regional to local scales is applied to a sample of 84 windstorms. The approach involves the dynamical downscaling of the Twentieth Century Reanalysis (20CR) ensemble mean to 3-km horizontal grid size using the Weather Research and Forecasting (WRF) model. Economic losses are simulated at municipal level for present-day asset distribution based on the downscaled (parameterised) wind gusts at high spatiotemporal resolution using the open-source impact model climada. A comparisonmore » with insurance loss data for two recent windstorms ("Lothar'' in 1999, "Joachim'' in 2011) indicates that the loss simulation allows to realistically simulate the spatial patterns of windstorm losses. The loss amplitude is strongly underestimated for 'Lothar', while it is in reasonable agreement for 'Joachim'. Possible reasons are discussed. Uncertainties concerning the loss simulation arise from the wind gust estimation method applied; estimates can differ considerably among the different methods, in particular over high orography. Furthermore, the quality of the loss simulation is affected by the underlying simplified assumptions regarding the distribution of assets and their susceptibilities to damage. For the whole windstorm sample, composite averages of simulated wind gust speed and loss are computed. Both composites reveal high values for the densely populated Swiss Plateau and lower values for south-eastern Switzerland; metropolitan areas stand out in the loss composite. Eight of the top 10 events concerning the losses simulated for present-day asset distribution and summed over all Swiss municipalities occurred after 1950. Furthermore, it remains uncertain whether this is due to decadal-scale changes of winter windstorms in Switzerland or merely due to a possible

  13. Hydrogen storage compositions

    DOE Patents [OSTI]

    Li, Wen; Vajo, John J.; Cumberland, Robert W.; Liu, Ping

    2011-04-19

    Compositions for hydrogen storage and methods of making such compositions employ an alloy that exhibits reversible formation/deformation of BH.sub.4.sup.- anions. The composition includes a ternary alloy including magnesium, boron and a metal and a metal hydride. The ternary alloy and the metal hydride are present in an amount sufficient to render the composition capable of hydrogen storage. The molar ratio of the metal to magnesium and boron in the alloy is such that the alloy exhibits reversible formation/deformation of BH.sub.4.sup.- anions. The hydrogen storage composition is prepared by combining magnesium, boron and a metal to prepare a ternary alloy and combining the ternary alloy with a metal hydride to form the hydrogen storage composition.

  14. Heavy metals in the near-surface aerosol over the Atlantic Ocean from 60 degree south to 54 degree north

    SciTech Connect (OSTI)

    Voelkening, J.; Heumann, K.G. )

    1990-11-20

    The particulate heavy metal concentrations of Cr, Fe, Ni, Cu, Zn, Cd, Tl, and Pb were determined in the atmosphere over the Atlantic Ocean from 60{degree}S to 54{degree}N with the definitive method of isotope dilution mass spectrometry. Fe was used as a reference element for the influence of crustal material calculating the corresponding enrichment factors EF(Fe) for the other metal traces. Tl showed the lowest abundance of all heavy metals with concentrations of less than 20 pg m{sup {minus}3} for all samples except those from the area around the English Channel. The concentration ranges for the other elements were Cr = <0.08-9 ng m{sup {minus}3}, Fe = <2.6-7,500 ng m{sup {minus}3}, Ni = <0.05-10 ng m{sup {minus}3}, Cu = <0.02-20 ng m{sup {minus}3}, Zn = <0.09-450 ng m{sup {minus}3}, Cd = <0.003-3.5 ng m{sup {minus}3}, and Pb = <0.05-200 ng m{sup {minus}3}. The lowest element concentrations were usually measured in the remote areas of the South Atlantic, whereas the highest ones were detected around the English Channel. Due to high Fe concentrations, a substantial influence of crustal material was observed in the atmosphere southeast of the South American continent, in the South Atlantic area of the southeast trades, and over the North Atlantic west of North Africa. EF(Fe) values for the most part less than 10 for Cr and Ni and less than 50 for Cu indicate that the influence of crustal material for these metals is much higher than for Zn, Cd, and Pb where EF(Fe) values between 500 and 5,000 had often been determined. This is due to anthropogenic and biological influences.

  15. RADIATION SHIELDING COMPOSITION

    DOE Patents [OSTI]

    Dunegan, H.L.

    1963-01-29

    A light weight radiation shielding composition is described whose mechanical and radiological properties can be varied within wide limits. The composition of this shielding material consists of four basic ingredients: powder of either Pb or W, a plastic resin, a resin plasticizer, and a polymerization catalyst to promote an interaction of the plasticizer with the plastic resin. Air may be mixed into the above ingredients in order to control the density of the final composition. For equivalent gamma attenuation, the shielding composition weighs one-third to one-half as much as conventional Pb shielding. (AEC)

  16. Composite Thermoelectric Devices

    Broader source: Energy.gov [DOE]

    Composite thermoelectric devices incorporating common conductors laminated between P- and N-type thermoelectric plates demonstrate internal ohmic loss reduction and enhanced performance

  17. Composition for detecting uranyl

    DOE Patents [OSTI]

    Baylor, Lewis C.; Stephens, Susan M.

    1995-01-01

    A composition for detecting the presence and concentration of a substance such as uranyl, comprising an organohalide covalently bonded to an indicator for said substance. The composition has at least one active OH site for forming a complex with the substance to be detected. The composition is made by reacting equimolar amounts of the indicator and the organohalide in a polar organic solvent. The absorbance spectrum of the composition-uranyl complex is shifted with respect to the absorbance spectrum of the indicator-uranyl complex, to provide better spectral resolution for detecting uranyl.

  18. Nuclear fuel composition

    DOE Patents [OSTI]

    Feild, Jr., Alexander L.

    1980-02-19

    1. A high temperature graphite-uranium base nuclear fuel composition containing from about 1 to about 5 five weight percent rhenium metal.

  19. Reactive composite compositions and mat barriers

    SciTech Connect (OSTI)

    Langton, Christine A.; Narasimhan, Rajendran; Karraker, David G.

    2001-01-01

    A hazardous material storage area has a reactive multi-layer composite mat which lines an opening into which a reactive backfill and hazardous material are placed. A water-inhibiting cap may cover the hazardous material storage area. The reactive multi-layer composite mat has a backing onto which is placed an active layer which will neutralize or stabilize hazardous waste and a fronting layer so that the active layer is between the fronting and backing layers. The reactive backfill has a reactive agent which can stabilize or neutralize hazardous material and inhibit the movement of the hazardous material through the hazardous material storage area.

  20. Interlayer toughening of fiber composite flywheel rotors

    DOE Patents [OSTI]

    Groves, S.E.; Deteresa, S.J.

    1998-07-14

    An interlayer toughening mechanism is described to mitigate the growth of damage in fiber composite flywheel rotors for long application. The interlayer toughening mechanism may comprise one or more tough layers composed of high-elongation fibers, high-strength fibers arranged in a woven pattern at a range from 0{degree} to 90{degree} to the rotor axis and bound by a ductile matrix material which adheres to and is compatible with the materials used for the bulk of the rotor. The number and spacing of the tough interlayers is a function of the design requirements and expected lifetime of the rotor. The mechanism has particular application in uninterruptable power supplies, electrical power grid reservoirs, and compulsators for electric guns, as well as electromechanical batteries for vehicles. 2 figs.

  1. Interlayer toughening of fiber composite flywheel rotors

    DOE Patents [OSTI]

    Groves, Scott E.; Deteresa, Steven J.

    1998-01-01

    An interlayer toughening mechanism to mitigate the growth of damage in fiber composite flywheel rotors for long application. The interlayer toughening mechanism may comprise one or more tough layers composed of high-elongation fibers, high-strength fibers arranged in a woven pattern at a range from 0.degree. to 90.degree. to the rotor axis and bound by a ductile matrix material which adheres to and is compatible with the materials used for the bulk of the rotor. The number and spacing of the tough interlayers is a function of the design requirements and expected lifetime of the rotor. The mechanism has particular application in uninterruptable power supplies, electrical power grid reservoirs, and compulsators for electric guns, as well as electromechanical batteries for vehicles.

  2. Glass-ceramic composition for hermetic seals

    DOE Patents [OSTI]

    Ballard, Jr., Clifford P.

    1979-01-01

    The invention relates to a glass-ceramic composition having a high fracture strength adaptable for hermetically sealing to chromium bearing iron or nickel base alloys at temperatures of between about 950.degree. C to about 1100.degree. C to form a hermetically sealed insulator body, comprising from about 55 to about 65 weight percent SiO.sub.2, from about 0 to about 5 weight percent Al.sub.2 O.sub.3, from about 6 to about 11 weight % Li.sub.2 O, from about 25 to about 32 weight percent BaO, from about 0.5 to about 1.0 weight percent CoO and from about 1.5 to about 3.5 weight percent P.sub.2 O.sub.5.

  3. Polyethylene composites containing a phase change material having a C14 straight chain hydrocarbon

    DOE Patents [OSTI]

    Salyer, Ival O.

    1987-01-01

    A composite useful in thermal energy storage, said composite being formed of a polyethylene matrix having a straight chain alkyl hydrocarbon incorporated therein, said polyethylene being crosslinked to such a degree that said polyethylene matrix is form stable and said polyethylene matrix is capable of absorbing at least 10% by weight of said straight chain alkyl hydrocarbon; the composite is useful in forming pellets or sheets having thermal energy storage characteristics.

  4. Memorial Day Message | National Nuclear Security Administration | (NNSA)

    National Nuclear Security Administration (NNSA)

    Memorial Day Message Friday, May 22, 2015 - 10:57am NNSA Blog Every year on Memorial Day, we honor the memory of those who died while defending our great Nation. We owe them, as well as their families and loved ones, more than we can ever repay for the sacrifices they have made on our behalf. At 3 p.m. on Monday, wherever you may happen to be, please stop and pause for one minute to remember those service members who answered the call to safeguard our interests around the world and to protect

  5. 2016 CSP Summit Day 2 | Department of Energy

    Office of Environmental Management (EM)

    2 2016 CSP Summit Day 2 Below are links to the agenda, presentations, and plenary sessions from the second day of the 2016 SunShot CSP Summit. 2016 CSP Summit Agenda (748.38 KB) Plenary Session - Joe Desmond, Brightsource Energy (9.53 MB) Plenary Session - Bill Gould, Solar Reserve (5.86 MB) Plenary Session - Hank Price, Abengoa (5.94 MB) Plenary Session - Ron Kent, SoCal Gas (6.01 MB) Presentation - Collectors (Structures) - Joel Stettenheim, Norwich Technologies (3.44 MB) Presentation -

  6. Energy Industry Days- Performance Contracting- San Diego, CA

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy is hosting several Energy Industry Day events to promote and publicize opportunities for small businesses seeking to meet DOE support requirements. Opportunities will be available for attendees to learn of potential partnerships with prime and subcontracting companies. These Energy Industry Day events would both support the agency's commitment to DOE's "Small Business First Policy" and would provide dedicated sessions that introduce Energy Service Companies (ESCOs) and other prime contract holders with small business.

  7. Lab to host annual LDRD day September 13

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab to host annual LDRD day Lab to host annual LDRD Day September 13 Some of LANL's most innovative scientists will explain and present their cutting-edge work to the public. September 6, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top

  8. Honoring Nuclear Security Workers on the National Day of Remembrance |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Nuclear Security Workers on the National Day of Remembrance Honoring Nuclear Security Workers on the National Day of Remembrance October 31, 2011 - 11:54am Addthis Workers dismantle a remaining B53, ensuring that the system will never again be part of the U.S. nuclear weapons stockpile. | Credit: NNSA photo Workers dismantle a remaining B53, ensuring that the system will never again be part of the U.S. nuclear weapons stockpile. | Credit: NNSA photo Secretary Chu

  9. Introduce a Girl to Engineering Day | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Learn About Introduce a Girl to Engineering Day Contact education@anl.gov Introduce a Girl to Engineering Day "Let us pick up our books and pencils. They are our most powerful weapon."- Malala Yousafzai, 2014 Nobel Prize Laureate Are you a problem solver? Are you compelled to understand how things work? Come join Argonne National Laboratory in exploring the world of Engineering and the endless possibilities a career in this exciting field offers. Women in Science and Technology, in

  10. Savannah River Ecology Laboratory - Touch An Animal Day 2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Return to Photo Album Savannah River Ecology Laboratory's 8th Annual "Touch An Animal Day!" August 20, 2016 Once again a fun day was had by all! Click on an image for a larger view. Special thanks to the following individuals for their help with this event: Matt Baker Dr. I. Lehr Brisbin Dr. Kurt Buhlmann Joseph Colbert Zoë Cooper Fanny Coutelot Mackenzie Dix Carol Eldridge Larry Eldridge Dean Fletcher Wes Flynn Dr. Whit Gibbons Judy Greene-McLeod Matt Hamilton David Keiter Linda Lee

  11. Molybdenum disilicide matrix composite

    DOE Patents [OSTI]

    Petrovic, John J.; Carter, David H.; Gac, Frank D.

    1990-01-01

    A composition consisting of an intermetallic compound, molybdenum disilicide, which is reinforced with VS silicon carbide whiskers dispersed throughout it and a method of making the reinforced composition. Use of the reinforcing material increases fracture toughness at low temperatures and strength at high temperatures, as compared to pure molybdenum disilicide.

  12. Molybdenum disilicide matrix composite

    DOE Patents [OSTI]

    Petrovic, John J.; Carter, David H.; Gac, Frank D.

    1991-01-01

    A composition consisting of an intermetallic compound, molybdenum disilicide, which is reinforced with VS silicon carbide whiskers dispersed throughout it and a method of making the reinforced composition. Use of the reinforcing material increases fracture toughness at low temperatures and strength at high temperatures, as compared to pure molybdenum disilicide.

  13. Biodegradable synthetic bone composites

    DOE Patents [OSTI]

    Liu, Gao; Zhao, Dacheng; Saiz, Eduardo; Tomsia, Antoni P.

    2013-01-01

    The invention provides for a biodegradable synthetic bone composition comprising a biodegradable hydrogel polymer scaffold comprising a plurality of hydrolytically unstable linkages, and an inorganic component; such as a biodegradable poly(hydroxyethylmethacrylate)/hydroxyapatite (pHEMA/HA) hydrogel composite possessing mineral content approximately that of human bone.

  14. Quantification of the degree of reaction of fly ash

    SciTech Connect (OSTI)

    Ben Haha, M.; De Weerdt, K.; Lothenbach, B.

    2010-11-15

    The quantification of the fly ash (FA) in FA blended cements is an important parameter to understand the effect of the fly ash on the hydration of OPC and on the microstructural development. The FA reaction in two different blended OPC-FA systems was studied using a selective dissolution technique based on EDTA/NaOH, diluted NaOH solution, the portlandite content and by backscattered electron image analysis. The amount of FA determined by selective dissolution using EDTA/NaOH is found to be associated with a significant possible error as different assumptions lead to large differences in the estimate of FA reacted. In addition, at longer hydration times, the reaction of the FA is underestimated by this method due to the presence of non-dissolved hydrates and MgO rich particles. The dissolution of FA in diluted NaOH solution agreed during the first days well with the dissolution as observed by image analysis. At 28 days and longer, the formation of hydrates in the diluted solutions leads to an underestimation. Image analysis appears to give consistent results and to be most reliable technique studied.

  15. Exposure to Pb, Cd, and As mixtures potentiates the production of oxidative stress precursors: 30-day, 90-day, and 180-day drinking water studies in rats

    SciTech Connect (OSTI)

    Whittaker, Margaret H.; Wang, Gensheng; Chen Xueqing; Lipsky, Michael; Smith, Donald; Gwiazda, Roberto; Fowler, Bruce A.

    2011-07-15

    Exposure to chemical mixtures is a common and important determinant of toxicity and is of particular concern due to their appearance in sources of drinking water. Despite this, few in vivo mixture studies have been conducted to date to understand the health impact of chemical mixtures compared to single chemicals. Interactive effects of lead (Pb), cadmium (Cd) and arsenic (As) were evaluated in 30-, 90-, and 180-day factorial design drinking water studies in rats designed to test the hypothesis that ingestion of such mixtures at individual component Lowest-Observed-Effect-Levels (LOELs) results in increased levels of the pro-oxidant delta aminolevulinic acid (ALA), iron, and copper. LOEL levels of Pb, Cd, and As mixtures resulted in the increased presence of mediators of oxidative stress such as ALA, copper, and iron. ALA increases were followed by statistically significant increases in kidney copper in the 90- and 180-day studies. Statistical evidence of interaction was identified for six biologically relevant variables: blood delta aminolevulinic acid dehydratase (ALAD), kidney ALAD, urinary ALA, urinary iron, kidney iron, and kidney copper. The current investigations underscore the importance of considering interactive effects that common toxic agents such as Pb, Cd, and As may have upon one another at low-dose levels. The interactions between known toxic trace elements at biologically relevant concentrations shown here demonstrate a clear need to rigorously review methods by which national/international agencies assess health risks of chemicals, since exposures may commonly occur as complex mixtures.

  16. Opening Day at SunShot Summit 2014

    Broader source: Energy.gov [DOE]

    An energetic crowd of hundreds of leaders throughout the solar community gathered yesterday in southern California to kick off SunShot’s four-day summit and work together to generate ideas to tackle the SunShot grand challenge to make solar energy cost competitive in the United States by 2020.

  17. Take Our Daughters and Sons to Work Day

    Broader source: Energy.gov [DOE]

    2014 is the 21st anniversary of the annual opportunity to immerse your children and relatives in the daily work of the Energy Department. On Thursday, April 24, bring your daughters and sons to the office with you for a day of shadowing your work, showing off your office, testing out the cafeteria, and meeting your coworkers. Check with your office for structured activities.

  18. Infrared curing simulations of liquid composites molding

    SciTech Connect (OSTI)

    Nakouzi, S.; Pancrace, J.; Schmidt, F. M.; Le Maoult, Y.; Berthet, F. [Universite de Toulouse (France); INSA, UPS, Mines Albi, ISAE, ICA - Institut Clement Ader, Campus Jarlard, F-81013 Albi cedex 09 (France); Ecole des Mines Albi, Campus Jarlard, F-81013 Albi (France)

    2011-05-04

    Infrared radiation is an effective energy source to cure thermosetting polymers. Its usage is expected to reduce curing time in comparison with thermal heating and mold thermally regulated. In addition, because of the polymerization mechanism and instant on-off control of this power, an improvement in the final properties of the material is also expected. In this paper, we studied the infrared interaction with carbon (or glass) fibers reinforced epoxy matrix, where Liquid resin infusion (LRI) is used to manufacture the composite. Temperature of the composite is a key parameter that affects its mechanical properties and is controlled by the infrared emitters and the exothermic heat released from the polymerization. Radiative heat flux is computed using the in-lab developed software RAYHEAT. Then, the heat flux (or absorbed energy for glass fibers) is exported to the finite element based program COMSOLMULTIPHYSICS where heat balance equation is solved. This equation is coupled with the exothermic heat released during the curing process in order to predict the composite temperature versus time and degree of cure. Numerical simulations will be performed on planar parts (sheet shape) as well as curvilinear shapes. Experimental validations of the infrared curing carbon (glass)-epoxy composite system are presented in this paper Sheet surface temperature distribution are measured thanks to infrared camera. Kinetic parameters were estimated from differential scanning calorimeter (DSC) experimental data.

  19. SunShot Prize Race to 7-Day Solar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Race to 7-Day Solar SunShot Prize Race to 7-Day Solar SunShot Prize: Race to 7-day solar (1.24 MB)

  20. STEM Mentoring Café and Day at the Lab | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STEM Mentoring Caf and Day at the Lab STEM Mentoring Caf and Day at the Lab STEM Mentoring Caf and Day at the Lab View All Maps Addthis

  1. Liquid crystalline composites containing phyllosilicates

    DOE Patents [OSTI]

    Chaiko, David J.

    2004-07-13

    The present invention provides phyllosilicate-polymer compositions which are useful as liquid crystalline composites. Phyllosilicate-polymer liquid crystalline compositions of the present invention can contain a high percentage of phyllosilicate while at the same time be transparent. Because of the ordering of the particles liquid crystalline composite, liquid crystalline composites are particularly useful as barriers to gas transport.

  2. Electrically conductive composite material

    DOE Patents [OSTI]

    Clough, Roger L.; Sylwester, Alan P.

    1989-01-01

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistant pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like.

  3. Flexible composite radiation detector

    DOE Patents [OSTI]

    Cooke, D. Wayne; Bennett, Bryan L.; Muenchausen, Ross E.; Wrobleski, Debra A.; Orler, Edward B.

    2006-12-05

    A flexible composite scintillator was prepared by mixing fast, bright, dense rare-earth doped powdered oxyorthosilicate (such as LSO:Ce, LSO:Sm, and GSO:Ce) scintillator with a polymer binder. The binder is transparent to the scintillator emission. The composite is seamless and can be made large and in a wide variety of shapes. Importantly, the composite can be tailored to emit light in a spectral region that matches the optimum response of photomultipliers (about 400 nanometers) or photodiodes (about 600 nanometers), which maximizes the overall detector efficiency.

  4. Composite metal membrane

    DOE Patents [OSTI]

    Peachey, Nathaniel M.; Dye, Robert C.; Snow, Ronny C.; Birdsell, Stephan A.

    1998-01-01

    A composite metal membrane including a first metal layer of Group IVB met or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof is provided together with a process for the recovery of hydrogen from a gaseous mixture including contacting a hydrogen-containing gaseous mixture with a first side of a nonporous composite metal membrane including a first metal of Group IVB metals or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof, and, separating hydrogen from a second side of the nonporous composite metal membrane.

  5. Composite metal membrane

    DOE Patents [OSTI]

    Peachey, N.M.; Dye, R.C.; Snow, R.C.; Birdsell, S.A.

    1998-04-14

    A composite metal membrane including a first metal layer of Group IVB met or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof is provided together with a process for the recovery of hydrogen from a gaseous mixture including contacting a hydrogen-containing gaseous mixture with a first side of a nonporous composite metal membrane including a first metal of Group IVB metals or Group VB metals, the first metal layer sandwiched between two layers of an oriented metal of palladium, platinum or alloys thereof, and, separating hydrogen from a second side of the nonporous composite metal membrane.

  6. Hybrid matrix fiber composites

    DOE Patents [OSTI]

    Deteresa, Steven J.; Lyon, Richard E.; Groves, Scott E.

    2003-07-15

    Hybrid matrix fiber composites having enhanced compressive performance as well as enhanced stiffness, toughness and durability suitable for compression-critical applications. The methods for producing the fiber composites using matrix hybridization. The hybrid matrix fiber composites include two chemically or physically bonded matrix materials, whereas the first matrix materials are used to impregnate multi-filament fibers formed into ribbons and the second matrix material is placed around and between the fiber ribbons that are impregnated with the first matrix material and both matrix materials are cured and solidified.

  7. Hard metal composition

    DOE Patents [OSTI]

    Sheinberg, H.

    1983-07-26

    A composition of matter having a Rockwell A hardness of at least 85 is formed from a precursor mixture comprising between 3 and 10 wt % boron carbide and the remainder a metal mixture comprising from 70 to 90% tungsten or molybdenum, with the remainder of the metal mixture comprising nickel and iron or a mixture thereof. The composition has a relatively low density of between 7 and 14 g/cc. The precursor is preferably hot pressed to yield a composition having greater than 100% of theoretical density.

  8. Electrically conductive composite material

    DOE Patents [OSTI]

    Clough, R.L.; Sylwester, A.P.

    1989-05-23

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistent pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like. 2 figs.

  9. Electrically conductive composite material

    DOE Patents [OSTI]

    Clough, R.L.; Sylwester, A.P.

    1988-06-20

    An electrically conductive composite material is disclosed which comprises a conductive open-celled, low density, microcellular carbon foam filled with a non-conductive polymer or resin. The composite material is prepared in a two-step process consisting of first preparing the microcellular carbon foam from a carbonizable polymer or copolymer using a phase separation process, then filling the carbon foam with the desired non-conductive polymer or resin. The electrically conductive composites of the present invention has a uniform and consistent pattern of filler distribution, and as a result is superior over prior art materials when used in battery components, electrodes, and the like. 2 figs.

  10. Hard metal composition

    DOE Patents [OSTI]

    Sheinberg, Haskell

    1986-01-01

    A composition of matter having a Rockwell A hardness of at least 85 is formed from a precursor mixture comprising between 3 and 10 weight percent boron carbide and the remainder a metal mixture comprising from 70 to 90 percent tungsten or molybdenum, with the remainder of the metal mixture comprising nickel and iron or a mixture thereof. The composition has a relatively low density of between 7 to 14 g/cc. The precursor is preferably hot pressed to yield a composition having greater than 100% of theoretical density.

  11. John Day Watershed Restoration Projects, annual report 2003.

    SciTech Connect (OSTI)

    Brown, Linda

    2004-01-01

    The John Day is the nation's second longest free-flowing river in the contiguous United States and the longest containing entirely unsupplemented runs of anadromous fish. Located in eastern Oregon, the basin drains over 8,000 square miles, Oregon's fourth largest drainage basin, and incorporates portions of eleven counties. Originating in the Strawberry Mountains near Prairie City, the John Day River flows 284 miles in a northwesterly direction, entering the Columbia River approximately four miles upstream of the John Day dam. With wild runs of spring Chinook salmon and summer steelhead, westslope cutthroat, and redband and bull trout, the John Day system is truly a basin with national significance. The majority of the John Day basin was ceded to the Federal government in 1855 by the Confederated Tribes of the Warm Springs Reservation of Oregon (Tribes). In 1997, the Tribes established an office in the basin to coordinate restoration projects, monitoring, planning and other watershed activities on private and public lands. Once established, the John Day Basin Office (JDBO) formed a partnership with the Grant Soil and Water Conservation District (GSWCD), which contracts the majority of the construction implementation activities for these projects from the JDBO. The GSWCD completes the landowner contact, preliminary planning, engineering design, permitting, construction contracting, and construction implementation phases of most projects. The JDBO completes the planning, grant solicitation/defense, environmental compliance, administrative contracting, monitoring, and reporting portion of the program. Most phases of project planning, implementation, and monitoring are coordinated with the private landowners and basin agencies, such as the Oregon Department of Fish and Wildlife and Oregon Water Resources Department. In 2003, the JDBO and GSWCD proposed continuation of their successful partnership between the two agencies and basin landowners to implement an additional

  12. NREL Earth Day Celebration Features Energy Activities, Tours

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Features Energy Activities, Tours For more information contact: e:mail: Public Affairs Golden, Colo., April 12, 1999 — Celebrate Earth Day by discovering the power of clean energy at the nation's premier laboratory for renewable energy and energy efficiency research, development and deployment. The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) will open its doors 10 a.m. to 3 p.m., April 24 for tours of its research facilities and interactive exhibits at the Visitors

  13. NNSA Small Business Week Day 4: Government Scientific Source | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) NNSA Small Business Week Day 4: Government Scientific Source December 16, 2010 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) on Monday announced that it distributed more than $395 million in small business obligations for federal prime contracts in fiscal year 2010. NNSA surpassed its departmental small business goal by 39 percent in fiscal year 2010. To highlight the success of its small business program, NNSA launched the

  14. 2014 Advanced Grid Modeling Peer Review Presentations - Day One Afternoon

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session | Department of Energy Afternoon Session 2014 Advanced Grid Modeling Peer Review Presentations - Day One Afternoon Session The Office of Electricity Delivery and Energy Reliability held a peer review of the Advanced Grid Modeling Program on June 17-18, 2014 in Alexandria, VA. The Advanced Grid Modeling Research Program leverages scientific research in mathematics for application to power system models and software tools. More than 17 projects were presented at the 2014 Advanced Grid

  15. 2014 Advanced Grid Modeling Peer Review Presentations - Day One Morning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session | Department of Energy Morning Session 2014 Advanced Grid Modeling Peer Review Presentations - Day One Morning Session The Office of Electricity Delivery and Energy Reliability held a peer review of the Advanced Grid Modeling Program on June 17-18, 2014 in Alexandria, VA. The Advanced Grid Modeling Research Program leverages scientific research in mathematics for application to power system models and software tools. More than 17 projects were presented at the 2014 Advanced Grid

  16. 2014 Advanced Grid Modeling Peer Review Presentations - Day Two Afternoon

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session | Department of Energy Afternoon Session 2014 Advanced Grid Modeling Peer Review Presentations - Day Two Afternoon Session The Office of Electricity Delivery and Energy Reliability held a peer review of the Advanced Grid Modeling Program on June 17-18, 2014 in Alexandria, VA. The Advanced Grid Modeling Research Program leverages scientific research in mathematics for application to power system models and software tools. More than 17 projects were presented at the 2014 Advanced Grid

  17. 2014 Advanced Grid Modeling Peer Review Presentations - Day Two Morning

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Session | Department of Energy Morning Session 2014 Advanced Grid Modeling Peer Review Presentations - Day Two Morning Session The Office of Electricity Delivery and Energy Reliability held a peer review of the Advanced Grid Modeling Program on June 17-18, 2014 in Alexandria, VA. The Advanced Grid Modeling Research Program leverages scientific research in mathematics for application to power system models and software tools. More than 17 projects were presented at the 2014 Advanced Grid

  18. Remembering the long day's journey to a historic machine's Christmas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eve first plasma | Princeton Plasma Physics Lab Remembering the long day's journey to a historic machine's Christmas Eve first plasma By John Greenwald December 21, 2012 Tweet Widget Google Plus One Share on Facebook The big moment arrives: The successful first plasma brought cheers to the command center. (Photo by Princeton Plasma Physics Laboratory) The big moment arrives: The successful first plasma brought cheers to the command center. 'Twas the night before Christmas and all through the

  19. COLLOQUIUM: Your Restless Brain: Changing Continually Throughout the Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Night | Princeton Plasma Physics Lab Upcoming Events Events Calendar Colloquia Archive Science On Saturday Archive Research Education Organization Contact Us Upcoming Events Events Calendar Colloquia Archive Science On Saturday Archive Events April 2, 2014, 4:00pm to 5:30pm MBG Auditorium COLLOQUIUM: Your Restless Brain: Changing Continually Throughout the Day and Night Professor Barry Jacobs Princeton University Presentation: File WC02APR2014_BJacob.pptx As you read this, your brain is

  20. The Dog Days of Summer - Capitalizing on the Pet Market

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dog Days of Summer - Capitalizing on the Pet Market July 9, 2015 Call Slides and Discussion Summary Agenda  Call Logistics and Opening Poll #1  Introductions  Residential Network and Peer Exchange Call Overview  Opening Poll #2 and #3  Setting the Stage: Pet Market Statistics  Featured Speaker  Julie Saporito, Program Administrator, City and County of Denver (Network Member)  Discussion  What opportunities exist for leveraging the pet market to promote residential

  1. Composition for detecting uranyl

    DOE Patents [OSTI]

    Baylor, L.C.; Stephens, S.M.

    1994-01-01

    The present invention relates to an indicator composition for use in spectrophotometric detection of a substance in a solution, and a method for making the composition. Useful indicators are sensitive to the particular substance being measured, but are unaffected by the fluid and other chemical species that may be present in the fluid. Optical indicators are used to measure the uranium concentration of process solutions in facilities for extracting uranium from ores, production of nuclear fuels, and reprocessing of irradiated fuels. The composition comprises an organohalide covalently bonded to an indicator for the substance, in such a manner that the product is itself an indicator that provides increased spectral resolution for detecting the substance. The indicator is preferably arsenazo III and the organohalide is preferably cyanuric chloride. These form a composition that is ideally suited for detecting uranyl.

  2. Composite zeolite membranes

    DOE Patents [OSTI]

    Nenoff, Tina M.; Thoma, Steven G.; Ashley, Carol S.; Reed, Scott T.

    2002-01-01

    A new class of composite zeolite membranes and synthesis techniques therefor has been invented. These membranes are essentially defect-free, and exhibit large levels of transmembrane flux and of chemical and isotopic selectivity.

  3. Sintered composite filter

    DOE Patents [OSTI]

    Bergman, W.

    1986-05-02

    A particulate filter medium formed of a sintered composite of 0.5 micron diameter quartz fibers and 2 micron diameter stainless steel fibers is described. Preferred composition is about 40 vol.% quartz and about 60 vol.% stainless steel fibers. The media is sintered at about 1100/sup 0/C to bond the stainless steel fibers into a cage network which holds the quartz fibers. High filter efficiency and low flow resistance are provided by the smaller quartz fibers. High strength is provided by the stainless steel fibers. The resulting media has a high efficiency and low pressure drop similar to the standard HEPA media, with tensile strength at least four times greater, and a maximum operating temperature of about 550/sup 0/C. The invention also includes methods to form the composite media and a HEPA filter utilizing the composite media. The filter media can be used to filter particles in both liquids and gases.

  4. OSTIblog Articles in the Earth Day Topic | OSTI, US Dept of Energy Office

    Office of Scientific and Technical Information (OSTI)

    of Scientific and Technical Information Day

  5. Protective coating for alumina-silicon carbide whisker composites

    DOE Patents [OSTI]

    Tiegs, Terry N.

    1989-01-01

    Ceramic composites formed of an alumina matrix reinforced with silicon carbide whiskers homogenously dispersed therein are provided with a protective coating for preventing fracture strength degradation of the composite by oxidation during exposure to high temperatures in oxygen-containing atmospheres. The coating prevents oxidation of the silicon carbide whiskers within the matrix by sealing off the exterior of the matrix so as to prevent oxygen transport into the interior of the matrix. The coating is formed of mullite or mullite plus silicon oxide and alumina and is formed in place by heating the composite in air to a temperature greater than 1200.degree. C. This coating is less than about 100 microns thick and adequately protects the underlying composite from fracture strength degradation due to oxidation.

  6. Uncharged positive electrode composition (Patent) | DOEPatents

    Office of Scientific and Technical Information (OSTI)

    Uncharged positive electrode composition Title: Uncharged positive electrode composition An uncharged positive-electrode composition contains particulate lithium sulfide, another ...

  7. Composite desiccant structure

    DOE Patents [OSTI]

    Fraioli, Anthony V. (Hawthorn Woods, IL); Schertz, William W. (Batavia, IL)

    1987-01-01

    A composite formed of small desiccant particles retained in a dark matrix composed of a porous binder containing a transition metal oxide with pores to provide moisture transport with respect to the particles, and metallic fibers to remove the heat of condensation during dehumidification and provide heat for the removal of moisture during regeneration. The moisture absorbing properties of the composite may be regenerated by exposure of the dark matrix to solar radiation with dehumidification occurring at night.

  8. Composite desiccant structure

    DOE Patents [OSTI]

    Fraioli, A.V.; Schertz, W.W.

    1984-06-06

    This patent discloses a composite formed of small desiccant particles retained in a dark matrix composed of a porous binder containing a transition metal oxide with pores to provide moisture transport with respect to the particles, and metallic fibers to remove the heat of condensation during dehumidification and provide heat for the removal of moisture during regeneration. The moisture absorbing properties of the composite may be regenerated by exposure of the dark matrix to solar radiation with dehumidification occurring at night.

  9. Polyarylether composition and membrane

    DOE Patents [OSTI]

    Hung, Joyce; Brunelle, Daniel Joseph; Harmon, Marianne Elisabeth; Moore, David Roger; Stone, Joshua James; Zhou, Hongyi; Suriano, Joseph Anthony

    2010-11-09

    A composition including a polyarylether copolymer is provided. The copolymer includes a polyarylether backbone; and a sulfonated oligomeric group bonded to the polyarylether suitable for use as a cation conducting membrane. Method of bonding a sulfonated oligomeric group to the polyarylether backbone to form a polyarylether copolymer. The membrane may be formed from the polyarylether copolymer composition. The chain length of the sulfonated oligomeric group may be controlled to affect or control the ion conductivity of the membrane.

  10. Agouti polypeptide compositions

    DOE Patents [OSTI]

    Woychik, Richard P. (Orinda, CA); Bultman, Scott J. (Lakewood, OH); Michaud, Edward J. (Kingston, TN)

    2001-10-30

    Disclosed are methods and compositions comprising novel agouti polypeptides and the polynucleotides which encode them. Also disclosed are DNA segments encoding these proteins derived from human and murine cell lines, and the use of these polynucleotides and polypeptides in a variety of diagnostic and therapeutic applications. Methods, compositions, kits, and devices are also provided for identifying compounds which are inhibitors of agouti activity, and for altering fatty acid synthetase activity and intracellular calcium levels in transformed cells.

  11. Boron nitride composites

    DOE Patents [OSTI]

    Kuntz, Joshua D.; Ellsworth, German F.; Swenson, Fritz J.; Allen, Patrick G.

    2016-02-16

    According to one embodiment, a composite product includes hexagonal boron nitride (hBN), and a plurality of cubic boron nitride (cBN) particles, wherein the plurality of cBN particles are dispersed in a matrix of the hBN. According to another embodiment, a composite product includes a plurality of cBN particles, and one or more borate-containing binders.

  12. IR Spectrometer Using 90-degree Off-axis Parabolic Mirrors

    SciTech Connect (OSTI)

    Robert M. Malone, Richard, G. Hacking, Ian J. McKenna, and Daniel H. Dolan

    2008-09-02

    A gated spectrometer has been designed for real-time, pulsed infrared (IR) studies at the National Synchrotron Light ource at the Brookhaven National Laboratory. A pair of 90-degree, off-axis parabolic mirrors are used to relay the light from an entrance slit to an output IR recording camera. With an initial wavelength range of 15004500 nm required, gratings could not be used in the spectrometer because grating orders would overlap. A magnesium oxide prism, placed between these parabolic mirrors, serves as the dispersion element. The spectrometer is doubly telecentric. With proper choice of the air spacing between the prism and the second parabolic mirror, any spectral region of interest within the InSb camera arrays sensitivity region can be recorded. The wavelengths leaving the second parabolic mirror are collimated, thereby relaxing the camera positioning tolerance. To set up the instrument, two different wavelength (visible) lasers are introduced at the entrance slit and made collinear with the optical axis via flip mirrors. After dispersion by the prism, these two laser beams are directed to tick marks located on the outside housing of the gated IR camera. This provides first-order wavelength calibration for the instrument. Light that is reflected off the front prism face is coupled into a high-speed detector to verify steady radiance during the gated spectral imaging. Alignment features include tick marks on the prism and parabolic mirrors. This instrument was designed to complement singlepoint pyrometry, which provides continuous time histories of a small collection of spots from shock-heated targets.

  13. Pressure-reaction synthesis of titanium composite materials

    DOE Patents [OSTI]

    Oden, Laurance L.; Ochs, Thomas L.; Turner, Paul C.

    1993-01-01

    A pressure-reaction synthesis process for producing increased stiffness and improved strength-to-weight ratio titanium metal matrix composite materials comprising exothermically reacting a titanium powder or titanium powder alloys with non-metal powders or gas selected from the group consisting of C, B, N, BN, B.sub.4 C, SiC and Si.sub.3 N.sub.4 at temperatures from about 900.degree. to about 1300.degree. C., for about 5 to about 30 minutes in a forming die under pressures of from about 1000 to 5000 psi.

  14. Methods for synthesis of semiconductor nanocrystals and thermoelectric compositions

    DOE Patents [OSTI]

    Ren, Zhifeng; Chen, Gang; Poudel, Bed; Kumar, Shankar; Wang, Wenzhong; Dresselhaus, Mildred

    2007-08-14

    The present invention provides methods for synthesis of IV VI nanostructures, and thermoelectric compositions formed of such structures. In one aspect, the method includes forming a solution of a Group IV reagent, a Group VI reagent and a surfactant. A reducing agent can be added to the solution, and the resultant solution can be maintained at an elevated temperature, e.g., in a range of about 20.degree. C. to about 360.degree. C., for a duration sufficient for generating nanoparticles as binary alloys of the IV VI elements.

  15. Compositional Variation Within Hybrid Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Compositional Variation Within Hybrid Nanostructures Compositional Variation Within Hybrid Nanostructures Print Wednesday, 29 September 2010 00:00 The inherently high surface area...

  16. Glass electrolyte composition

    DOE Patents [OSTI]

    Kucera, Gene H.; Roche, Michael F.

    1985-01-01

    An ionically conductive glass is disclosed for use as electrolyte in a high temperature electrochemical cell, particularly a cell with sodium anode and sulfur cathode. The glass includes the constituents Na.sub.2 O, ZrO.sub.2, Al.sub.2 O.sub.3 and SiO.sub.2 in selected proportions to be a single phase solid solution substantially free of crystalline regions and undissolved constituents. Other advantageous properties are an ionic conductivity in excess of 2.times.10.sup.-3 (ohm-cm).sup.-1 at 300.degree. C. and a glass transition temperature in excess of 500.degree. C.

  17. Effect of sulfur isotopic composition of zinc and lead sulfides on the E. M. F. of electrochemical cells

    SciTech Connect (OSTI)

    Lusk, J.; Krouse, H.R.; Batts, B.D.

    1988-03-01

    A new effect is reported in which unexpectedly large voltages are produced by electrochemical cells containing sulfides at natural isotopic abundance levels. Room temperature experiments were undertaken to determine whether electrochemical cells employing silver bromide and silver beta alumina as solid electrolytes would be sufficiently sensitive to detect small variations in sulfur isotopic composition for zinc and lead sulfides. Voltages obtained for silver bromide cells tended to increase progressively over at least 20 days, and increased in a regular fashion with increasing differences in isotopic composition between charges. Voltages exceeding 150 mV were obtained for /sup delta/S/sup 3,4/ differences up to 85 per mil for zinc sulfide, but reached only about 20 mV for lead sulfide. Silver beta alumina cells with opposing zinc and lead sulfide charges yielded larger voltages and E.M.F. minimum corresponding to a +8(/plus minus/2) per mil difference. This value shows reasonable agreement with interpolated 20/degrees/C equilibrium values of between +7.5 to +9.8 obtained from the literature. Matured silver bromide cells with opposed zinc and lead sulfide charges behaved similarly but yielded lower voltages. Silver concentration cells of the opposed type are thus able to detect isotopic equilibrium and this will permit calibration of sulfur isotope thermometers down to unexpectedly low temperatures.

  18. A general formulation for compositional reservoir simulation

    SciTech Connect (OSTI)

    Rodriguez, F.; Guzman, J.; Galindo-Nava, A.

    1994-12-31

    In this paper the authors present a general formulation to solve the non-linear difference equations that arise in compositional reservoir simulation. The general approach here presented is based on newton`s method and provides a systematic approach to generate several formulations to solve the compositional problem, each possessing a different degree of implicitness and stability characteristics. The Fully-Implicit method is at the higher end of the implicitness spectrum while the IMPECS method, implicit in pressure-explicit in composition and saturation, is at the lower end. They show that all methods may be obtained as particular cases of the fully-implicit method. Regarding the matrix problem, all methods have a similar matrix structure; the composition of the Jacobian matrix is however unique in each case, being in some instances amenable to reductions for optimal solution of the matrix problem. Based on this, a different approach to derive IMPECS type methods is proposed; in this case, the whole set of 2nc + 6 equations, that apply in each gridblock, is reduced to a single pressure equation through matrix reduction operations; this provides a more stable numerical scheme, compared to other published IMPCS methods, in which the subset of thermodynamic equilibrium equations is arbitrarily decoupled form the set of gridblock equations to perform such reduction. The authors discuss how the general formulation here presented can be used to formulate and construct an adaptive-implicit compositional simulators. They also present results on the numerical performance of FI, IMPSEC and IMPECS methods on some test problems.

  19. Brief 71 Health Physics Enrollments and Degrees, 2011 Summary (11-12

    SciTech Connect (OSTI)

    Dr. Don Johnson

    2012-11-07

    The survey includes degrees granted between September 1, 2010 and August 31, 2011. Enrollment information refers to the fall term 2011. The enrollment and degree data include students majoring in health physics or in an option program equivalent to a major. Twenty-four academic programs reported having health physics programs during 2011. The data for two health physics options within nuclear engineering programs are also included in the enrollments and degrees that are reported in the nuclear engineering enrollments and degrees data.

  20. ORISE: Number of health physics degrees granted in 2013 has increased for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    undergraduates, declined for graduates Number of undergraduate health physics degrees dropped in 2015 to lowest level in more than a decade Despite number of bachelor's degrees decreasing, number of master's and doctorate degrees increased* FOR IMMEDIATE RELEASE Aug. 3, 2016 FY16-33.1 OAK RIDGE, Tenn.-The number of undergraduate students who graduated in 2015 with bachelor's degrees in health physics dropped to the lowest level in more than a decade, while the number of master's and

  1. ORISE: Number of health physics degrees granted in 2013 has increased for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    undergraduates, declined for graduates Number of undergraduate health physics degrees dropped in 2015 to lowest level in more than a decade Despite number of bachelor's degrees decreasing, number of master's and doctorate degrees increased* FOR IMMEDIATE RELEASE Aug. 3, 2016 FY16-33.1 OAK RIDGE, Tenn.-The number of undergraduate students who graduated in 2015 with bachelor's degrees in health physics dropped to the lowest level in more than a decade, while the number of master's and

  2. NREL Earth Day Celebration Cancelled Because of Weather

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cancelled Because of Weather For more information contact: e:mail: Public Affairs Golden, Colo., April 22, 1999 — The Earth Day celebration planned for Saturday, April 24 at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in Golden has been cancelled because of this week's snow storm. It will be rescheduled at a later date. Those interested in exploring NREL will have other opportunities to see firsthand how the sun, wind and plant matter can be used to make energy.

  3. HERO PRESENTS A DAY HIKE AT MT. ST. HELENS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HERO PRESENTS A DAY HIKE AT MT. ST. HELENS Saturday, September 10, 2016 Mt. St. Helens lost its top on May 18, 1980 (see the 'before' and 'after' pictures above). The environment has been left to respond naturally to the disturbance - and we'll see how it is doing 36 years into recovery. We'll head to Windy Ridge and walk the "sand ladder," hike towards Norway Pass, take the Meta Lake trail, and see the miner's car in person (pictured below); lots of photo opportunities!! This is a

  4. Nuclear Fusion Drives Present-Day Accelerated Cosmic Expansion

    SciTech Connect (OSTI)

    Ying, Leong

    2010-09-30

    The widely accepted model of our cosmos is that it began from a Big Bang event some 13.7 billion years ago from a single point source. From a twin universe perspective, the standard stellar model of nuclear fusion can account for the Dark Energy needed to explain the mechanism for our present-day accelerated expansion. The same theories can also be used to account for the rapid inflationary expansion at the earliest time of creation, and predict the future cosmic expansion rate.

  5. Cori Lisa Gerhardt, Evan Racah DAS Data Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spark on Cori Lisa Gerhardt, Evan Racah DAS Data Day What is Spark? ● Apache Spark is a fast and general engine for large-scale data processing ● Data-parallel model ○ Similar to Hadoop, except it harnesses in-memory data for fast data processing ● Robust body of libraries: machine learning, sql, graphx, streaming ● Created at the AMPLab in UCB, currently maintained by DataBricks, more than 400 contributors to git repository ● Requires no parallel programming expertise: Can take

  6. 2014 SunShot Grand Challenge Summit Day Two Photos | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Day Two Photos 2014 SunShot Grand Challenge Summit Day Two Photos Addthis Day 2 Subprogram Overviews 9 1 of 39 Day 2 Subprogram Overviews 9 Photo Credit: SunShot Date taken: 2014-05-20 14:41 Day 2 Subprogram Overviews 8 2 of 39 Day 2 Subprogram Overviews 8 Photo Credit: SunShot Date taken: 2014-05-20 14:37 Day 2 Subprogram Overviews 7 3 of 39 Day 2 Subprogram Overviews 7 Photo Credit: SunShot Date taken: 2014-05-20 14:36 Day 2 Subprogram Overviews 6 4 of 39 Day 2 Subprogram Overviews 6 Photo

  7. Composite Armor and Methods for Making Composite Armor - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Advanced Materials Advanced Materials Find More Like This Return to Search Composite Armor and Methods for Making Composite Armor Battelle Memorial Institute Contact BMI About This Technology Publications: PDF Document Publication Patent Application (183 KB) Technology Marketing SummaryThe present invention relates, in general, to a composite armor and a process for forming a composite armor. Composite armor containing ceramics and high strength fibers have been useful to provide

  8. Polymer and Composite Materials Meeting Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Day 1 (all times in Eastern Time Zone) Start End Activity POC 08:00 08:45 Reception and badging DOE 08:45 09:00 Welcome and meeting objectives / expectations / time horizon for research activities (targets) Erika Sutherland, Sunita Satyapal 09:00 10:00 Polymer/elastomer and composite material science: key issues, knowledge gaps, R&D/testing data needs (40 min speaking, 20 min Q&A) Kevin Simmons 10:00 10:30 Codes and standards requirements - SAE J2579, SAE J2601: knowledge gaps, R&D

  9. Nanostructured metal-polyaniline composites

    DOE Patents [OSTI]

    Wang, Hsing-Lin; Li, Wenguang; Bailey, James A.; Gao, Yuan

    2010-08-31

    Metal-polyaniline (PANI) composites are provided together with a process of preparing such composites by an electrodeless process. The metal of the composite can have nanoscale structural features and the composites can be used in applications such as catalysis for hydrogenation reactions and for analytical detection methods employing SERS.

  10. Silicone-containing composition

    DOE Patents [OSTI]

    Mohamed, Mustafa

    2012-01-24

    A silicone-containing composition comprises the reaction product of a first component and an excess of an isocyanate component relative to the first component to form an isocyanated intermediary. The first component is selected from one of a polysiloxane and a silicone resin. The first component includes a carbon-bonded functional group selected from one of a hydroxyl group and an amine group. The isocyanate component is reactive with the carbon-bonded functional group of the first component. The isocyanated intermediary includes a plurality of isocyanate functional groups. The silicone-containing composition comprises the further reaction product of a second component, which is selected from the other of the polysiloxane and the silicone resin. The second component includes a plurality of carbon-bonded functional groups reactive with the isocyanate functional groups of the isocyanated intermediary for preparing the silicone-containing composition.

  11. Saccharide antifreeze compositions

    DOE Patents [OSTI]

    Walters, Kent; Duman, John G; Serianni, Anthony S

    2013-12-10

    The invention provides an antifreeze glycolipid compounds and composition comprising a polysaccharide moiety of Formula I; ##STR00001## wherein D-Manp represents a D-mannopyranose moiety, D-Xylp represents a D-xylopyranose moiety, and n is about 5 to about 70; and one or more lipid moieties covalently linked to the polysaccharide moiety of Formula I or electrostatically associated with the polysaccaride moiety for Formula I. The antifreeze glycolipid compounds and compositions can be used for a variety of industrial, agricultural, medical, and cosmetic applications where recrystallization-inhibition, cyroprotection, or cryopreservation is desired. The antifreeze glycolipid compounds or compositions can be used as, for example, as cryoprotectants for tissue preservation and transplantation, improving the texture of processed frozen food and frozen meats, frostbit protection, crop protection, and green alternatives for land vehicle antifreeze and aircraft de-icing.

  12. Ceramic composite coating

    DOE Patents [OSTI]

    Wicks, G.G.

    1997-01-21

    A thin, room-temperature-curing, ceramic composite for coating and patching metal substrates comprises a sol gel silica glass matrix filled with finely ground particles or fibers, preferably alumina. The sol gel glass is made by adding ethanol to water to form a first mixture, then separately adding ethanol to tetraethyl orthosilicate to form a second mixture, then slowly adding the first to the second mixture to make a third mixture, and making a slurry by adding the finely ground particles or fibers to the third mixture. The composite can be applied by spraying, brushing or trowelling. If applied to patch fine cracks, densification of the ceramic composite may be obtained to enhance sealing by applying heat during curing.

  13. Ceramic composite coating

    DOE Patents [OSTI]

    Wicks, George G.

    1997-01-01

    A thin, room-temperature-curing, ceramic composite for coating and patching etal substrates comprises a sol gel silica glass matrix filled with finely ground particles or fibers, preferably alumina. The sol gel glass is made by adding ethanol to water to form a first mixture, then separately adding ethanol to tetraethyl orthosilicate to form a second mixture, then slowly adding the first to the second mixture to make a third mixture, and making a slurry by adding the finely ground particles or fibers to the third mixture. The composite can be applied by spraying, brushing or trowelling. If applied to patch fine cracks, densification of the ceramic composite may be obtained to enhance sealing by applying heat during curing.

  14. Composition for absorbing hydrogen

    DOE Patents [OSTI]

    Heung, Leung K.; Wicks, George G.; Enz, Glenn L.

    1995-01-01

    A hydrogen absorbing composition. The composition comprises a porous glass matrix, made by a sol-gel process, having a hydrogen-absorbing material dispersed throughout the matrix. A sol, made from tetraethyl orthosilicate, is mixed with a hydrogen-absorbing material and solidified to form a porous glass matrix with the hydrogen-absorbing material dispersed uniformly throughout the matrix. The glass matrix has pores large enough to allow gases having hydrogen to pass through the matrix, yet small enough to hold the particles dispersed within the matrix so that the hydrogen-absorbing particles are not released during repeated hydrogen absorption/desorption cycles.

  15. Composition for absorbing hydrogen

    DOE Patents [OSTI]

    Heung, L.K.; Wicks, G.G.; Enz, G.L.

    1995-05-02

    A hydrogen absorbing composition is described. The composition comprises a porous glass matrix, made by a sol-gel process, having a hydrogen-absorbing material dispersed throughout the matrix. A sol, made from tetraethyl orthosilicate, is mixed with a hydrogen-absorbing material and solidified to form a porous glass matrix with the hydrogen-absorbing material dispersed uniformly throughout the matrix. The glass matrix has pores large enough to allow gases having hydrogen to pass through the matrix, yet small enough to hold the particles dispersed within the matrix so that the hydrogen-absorbing particles are not released during repeated hydrogen absorption/desorption cycles.

  16. Abrasion resistant composition

    DOE Patents [OSTI]

    Fischer, Keith D; Barnes, Christopher A; Henderson, Stephen L

    2014-05-13

    A surface covering composition of abrasion resistant character adapted for disposition in overlying bonded relation to a metal substrate. The surface covering composition includes metal carbide particles within a metal matrix at a packing factor of not less than about 0.6. Not less than about 40 percent by weight of the metal carbide particles are characterized by an effective diameter in the range of +14-32 mesh prior to introduction to the metal matrix. Not less than about 3 percent by weight of the metal carbide particles are characterized by an effective diameter of +60 mesh prior to introduction to the metal matrix.

  17. Composition for radiation shielding

    DOE Patents [OSTI]

    Kronberg, James W.

    1994-01-01

    A composition for use as a radiation shield. The shield has a depleted urum core for absorbing gamma rays and a bismuth coating for preventing chemical corrosion and absorbing gamma rays. Alternatively, a sheet of gadolinium may be positioned between the uranium core and the bismuth coating for absorbing neutrons. The composition is preferably in the form of a container for storing materials that emit radiation such as gamma rays and neutrons. The container is preferably formed by casting bismuth around a pre-formed uranium container having a gadolinium sheeting, and allowing the bismuth to cool. The resulting container is a structurally sound, corrosion-resistant, radiation-absorbing container.

  18. Liquid crystalline composites containing phyllosilicates

    DOE Patents [OSTI]

    Chaiko; David J.

    2007-05-08

    The present invention provides barrier films having reduced gas permeability for use in packaging and coating applications. The barrier films comprise an anisotropic liquid crystalline composite layer formed from phyllosilicate-polymer compositions. Phyllosilicate-polymer liquid crystalline compositions of the present invention can contain a high percentage of phyllosilicate while remaining transparent. Because of the ordering of the particles in the liquid crystalline composite, barrier films comprising liquid crystalline composites are particularly useful as barriers to gas transport.

  19. Revolutionizing Clean Energy Technology with Advanced Composites...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Revolutionizing Clean Energy Technology with Advanced Composites Revolutionizing Clean Energy Technology with Advanced Composites Addthis

  20. John Day Fish Passage and Screening; 2003 Annual Report.

    SciTech Connect (OSTI)

    Allen, Steve

    2004-02-01

    The primary goal of the Oregon Screens Project was to implement 20 replacement screens projects in the John Day sub-basin and any projects identified in the Umatilla and Walla Walla sub-basins. A secondary goal is to complete a passage project, if one is identified, in any of the above sub-basins. Mid-Columbia ESU listed steelhead and USF&W listed bull trout inhabit these sub-basins and are present at most locations, along with a variety of resident fish species. We also provide assistance to our Enterprise Screen Shop, in the Grande Ronde/Imnaha sub-basins, if needed. All projects were designed and implemented under current National Marine Fisheries Service screening and passage criteria.

  1. Composition and method for brazing graphite to graphite

    DOE Patents [OSTI]

    Taylor, Albert J. (Ten Mile, TN); Dykes, Norman L. (Oak Ridge, TN)

    1984-01-01

    The present invention is directed to a brazing material for joining graphite structures that can be used at temperatures up to about 2800.degree. C. The brazing material formed of a paste-like composition of hafnium carbide and uranium oxide with a thermosetting resin. The uranium oxide is converted to uranium dicarbide during the brazing operation and then the hafnium carbide and uranium dicarbide form a liquid phase at a temperature about 2600.degree. C. with the uranium diffusing and vaporizing from the joint area as the temperature is increased to about 2800.degree. C. so as to provide a brazed joint consisting essentially of hafnium carbide. This brazing temperature for hafnium carbide is considerably less than the eutectic temperature of hafnium carbide of about 3150.degree. C. The brazing composition also incorporates the thermosetting resin so that during the brazing operation the graphite structures may be temporarily bonded together by thermosetting the resin so that machining of the structures to final dimensions may be completed prior to the completion of the brazing operation. The resulting brazed joint is chemically and thermally compatible with the graphite structures joined thereby and also provides a joint of sufficient integrity so as to at least correspond with the strength and other properties of the graphite.

  2. Susceptibility of Granite Rock to scCO2/Water at 200 degrees C and 250 degrees C

    SciTech Connect (OSTI)

    Sugama, T.; Gill, S., Ecker, L., Butcher, T., Warren, J.

    2011-01-01

    of the non-carbonated surfaces of the underlying rock was reason why the hornblende and diorite exhibited a minimum depth of carbonation. Under exposure to the scCO{sub 2}/water at 200 C and 10.34 MPa pressure for up to 42 days, the ranking of the magnitude of erosion caused by wet carbonation was in the following order; granite > albite > hornblende > diorite > quartz. The eroding-caused weight loss of granite (0.88 %) was {approx}2.4, {approx}5.2, {approx}9.8, and {approx}17.6 times greater than that of albite, hornblends, diorite, and quartz, respectively.

  3. Composite material dosimeters

    DOE Patents [OSTI]

    Miller, Steven D.

    1996-01-01

    The present invention is a composite material containing a mix of dosimeter material powder and a polymer powder wherein the polymer is transparent to the photon emission of the dosimeter material powder. By mixing dosimeter material powder with polymer powder, less dosimeter material is needed compared to a monolithic dosimeter material chip. Interrogation is done with excitation by visible light.

  4. Irradiation creep of various ferritic alloys irradiated at {approximately}400{degrees}C in the PFR and FFTF reactors

    SciTech Connect (OSTI)

    Toloczko, M.B.; Garner, F.A.; Eiholzer, C.R.

    1997-04-01

    Three ferritic alloys were irradiated in two fast reactors to doses of 50 dpa or more at temperatures near 400{degrees}C. One martensitic alloy, HT9, was irradiated in both the FFTF and PFR reactors. PFR is the Prototype Fast Reactor in Dourneay, Scotland, and FFTF is the Fast Flux Test Facility in Richland, WA. D57 is a developmental alloy that was irradiated in PFR only, and MA957 is a Y{sub 2}O{sub 3} dispersion-hardened ferritic alloy that was irradiated only in FFTF. These alloys exhibited little or no void swelling at {approximately}400{degrees}C. Depending on the alloy starting condition, these steels develop a variety of non-creep strains early in the irradiation that are associated with phase changes. Each of these alloys creeps at a rate that is significantly lower than that of austenitic steels irradiated in the same experiments. The creep compliance for ferritic alloys in general appears to be {approximately}0.5 x 10{sup {minus}6} MPa{sup {minus}1} dpa{sup {minus}1}, independent of both composition and starting state. The addition of Y{sub 2}O{sub 3} as a dispersoid does not appear to change the creep behavior.

  5. p-Hydroxyphenyl (H) Units Lower the Degree of Polymerization in Lignin: Chemical Control in Lignin Biosynthesis

    SciTech Connect (OSTI)

    Sangha, A. K.; Parks, J. M.; Davis, M. F.; Smith, J. C.

    2013-01-01

    Lignin, composed predominantly of p-hydroxyphenyl (H), guaiacyl (G) and syringyl (S) subunits, is a major component of plant cell walls that imparts resistance toward chemical and microbial deconstruction of plant biomass, rendering its conversion inefficient and costly. Previous studies have shown that alterating lignin composition, i.e., the relative abundance of H, G and S subunits, promises more efficient extraction of sugars from plant biomass. Smaller and less branched lignin chains are more easily extracted during pretreatment, making cellulose more readily degradable. Here, using density functional theory calculations, we show that the incorporation of H subunits into lignin via b-b and b-5 interunit linkages reduces the degree of polymerization in lignin. Frontier molecular orbital analyses of lignin dimers and trimers show that H as a terminal subunit on a growing lignin polymer linked via b-b and b-5 linkage cannot undergo radical formation, preventing further chain growth by endwise polymerization resulting in lignin polymers with lower degree of polymerization. These results indicate that, for endwise polymerization in lignin synthesis, there exists a chemical control that may lay a significant role in determining the structure of lignin.

  6. Ultra low friction carbon/carbon composites for extreme temperature applications

    DOE Patents [OSTI]

    Erdemir, Ali; Busch, Donald E.; Fenske, George R.; Lee, Sam; Shepherd, Gary; Pruett, Gary J.

    2001-01-01

    A carbon/carbon composite in which a carbon matrix containing a controlled amount of boron or a boron compound is reinforced with carbon fiber exhibits a low coefficient of friction, i.e., on the order of 0.04 to 0.1 at temperatures up to 600.degree. C., which is one of the lowest frictional coefficients for any type of carbonaceous material, including graphite, glassy carbon, diamond, diamond-like carbon and other forms of carbon material. The high degree of slipperiness of the carbon composite renders it particularly adapted for limiting friction and wear at elevated temperatures such as in seals, bearings, shafts, and flexible joints

  7. Composite coating for low friction and wear applications and method thereof

    DOE Patents [OSTI]

    Besmann, Theodore M.; Blau, Peter J.; Lee, Woo Y.; Bae, Yong W.

    1998-01-01

    An article having a multiphase composite lubricant coating of a hard refractory matrix phase of titanium nitride dispersed with particles of a solid lubricating phase of molybdenum disulfide is prepared by heating the article to temperatures between 350.degree. and 850.degree. C. in a reaction vessel at a reduced pressure and passing a gaseous mixture of Ti((CH.sub.3).sub.2 N).sub.4, MoF.sub.6, H.sub.2 S and NH.sub.3 over the heated article forming a multiphase composite lubricant coating on the article.

  8. Design study of fiber-composite penetrator cases

    SciTech Connect (OSTI)

    Logan, R.W.; Groves, S.E.; Lyon, R.E.

    1993-10-22

    A design study was conducted to demonstrate the viability of carbon-fiber reinforced epoxy composites as structural case materials for penetrating warheads. The objective was to conduct well-instrumented experimental studies of composite-body penetrators perforating mild steel plates and quantitatively model these plate penetrations using two- and three-dimensional finite element codes over a wide range of velocities and impact conditions in order to develop predictive capability for composite design and for use in tradeoff studies with existing case materials. Understanding of the failure of composite-body penetrators would be demonstrated by a rational design iteration which significantly improved performance. Initial studies utilized existing 1-degree tapered cylindrical carbon fiber/epoxy composite cases fabricated by wet-filament winding. These sharp-tipped, steel-nose, composite penetrators were strain-gaged, piggy-backed with 57 kilograms, and impacted into steel plates in a velocity-boosted droptower at impact velocities ranging from 3 to 18 meters per second. Load, time, and position data were recorded during the impact event as well as the axial and hoop strains in the composite case. Monolithic 4340 hardened steel penetrators with both sharp- and flat-tip 3-caliber ogive noses were also impacted into mild steel plates. Data from the composite-case and steel penetrators were used to calibrate a multiaxial, rate-dependent, flow and failure model for the mild steel plates in NIKE2D. The authors were then able to successfully predict survival and failure of the composite-case penetrators in normal-incidence droptower tests for different target thickness and velocity combinations.

  9. ADAPTION OF NONSTANDARD PIPING COMPONENTS INTO PRESENT DAY SEISMIC CODES

    SciTech Connect (OSTI)

    D. T. Clark; M. J. Russell; R. E. Spears; S. R. Jensen

    2009-07-01

    With spiraling energy demand and flat energy supply, there is a need to extend the life of older nuclear reactors. This sometimes requires that existing systems be evaluated to present day seismic codes. Older reactors built in the 1960s and early 1970s often used fabricated piping components that were code compliant during their initial construction time period, but are outside the standard parameters of present-day piping codes. There are several approaches available to the analyst in evaluating these non-standard components to modern codes. The simplest approach is to use the flexibility factors and stress indices for similar standard components with the assumption that the non-standard component’s flexibility factors and stress indices will be very similar. This approach can require significant engineering judgment. A more rational approach available in Section III of the ASME Boiler and Pressure Vessel Code, which is the subject of this paper, involves calculation of flexibility factors using finite element analysis of the non-standard component. Such analysis allows modeling of geometric and material nonlinearities. Flexibility factors based on these analyses are sensitive to the load magnitudes used in their calculation, load magnitudes that need to be consistent with those produced by the linear system analyses where the flexibility factors are applied. This can lead to iteration, since the magnitude of the loads produced by the linear system analysis depend on the magnitude of the flexibility factors. After the loading applied to the nonstandard component finite element model has been matched to loads produced by the associated linear system model, the component finite element model can then be used to evaluate the performance of the component under the loads with the nonlinear analysis provisions of the Code, should the load levels lead to calculated stresses in excess of Allowable stresses. This paper details the application of component-level finite

  10. John Day Fish Passage and Screening; 2002 Annual Report.

    SciTech Connect (OSTI)

    Hartlerode, Ray; Dabashinsky, Annette; Allen, Steve

    2003-01-28

    This project is necessary to insure that replacement of fish screening devices and fishways meet current NMFS design criteria for the protection of all salmonid life stages. The mission of the fish passage program in Northeast Oregon is to protect and enhance fish populations by assisting private landowners, public landowners, irrigation districts and others by maintaining fish screening devices and fishways. These facilities reduce or eliminate fish loss associated with irrigation withdrawals, and as a result insure fish populations are maintained for enjoyment by present and future generations. Assistance is provided through state and federal programs. This can range from basic technical advice to detailed construction, fabrication and maintenance of screening and passage facilities. John Day screens personnel identified 50 sites for fish screen replacement, and one fish passage project. These sites are located in critical spawning, rearing and migration areas for spring chinook, summer steelhead and bull trout. All projects were designed and implemented to meet current NMFS criteria. It is necessary to have a large number of sites identified due to changes in weather, landowner cooperation and access issues that come up as we try and implement our goal of 21 completed projects.

  11. Optimization of Hydroacoustic Deployments at John Day Dam

    SciTech Connect (OSTI)

    Ploskey, Gene R.; Cook, Christopher B.; Titzler, P. Scott; Moursund, Russell A.

    2002-11-12

    This report describes short-term studies conducted in late November and early December 2001 to optimize hydroacoustic sampling techniques for John Day Dam before the 2002 fish passage efficiency (FPE) study. Knowledge gained in this study should significantly improve hydroacoustic sampling and the accuracy of estimates of fish passage at two locations that have presented problems in past studies. The spillway has been most problematic because many fish detected there were not entrained. Without correction, non-commitment of fish can result in multiple detections and overestimation of fish passage and FPE. Trash-rack-mounted, down-looking transducers for sampling unguided fish at a submerged traveling screen (STS) also have posed problems because the beam was aimed so far downstream that researchers had concerns about fish aspect and detectability. The deployments, aiming angles, and ping rates described here should eliminate all problems encountered in previous studies. This report describes hydroacoustic evaluations. The spill-bay deployment identified in this study should completely eliminate multiple detections of fish by limiting the sample volume for counting fish to the deep high-discharge volume adjacent to the gate. Results from testing of transducers deployed in a turbine intake with an STS suggest that, after testing in 2002, it may be possible to cut the number of powerhouse transducers sampling STS units by 50% or to double the spatial sampling coverage with the same number of transducers, all while improving detectability.

  12. ORISE: Report by ORISE shows health physics degrees declined on all levels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in 2014 Health physics degrees declined in 2014, enrollment trends reverse Enrollment data suggests slowly declining trends FOR IMMEDIATE RELEASE June 25, 2015 FY15-37 OAK RIDGE, Tenn.-The total number of degrees awarded to students graduating with majors in health physics has declined across undergraduate, graduate and doctoral programs for the first time in four years. The report conducted by the Oak Ridge Institute for Science and Education, titled Health Physics Enrollments and Degrees

  13. Negative electrode composition

    DOE Patents [OSTI]

    Kaun, Thomas D.; Chilenskas, Albert A.

    1982-01-01

    A secondary electrochemical cell and a negative electrode composition for use therewith comprising a positive electrode containing an active material of a chalcogen or a transiton metal chalcogenide, a negative electrode containing a lithium-aluminum alloy and an amount of a ternary alloy sufficient to provide at least about 5 percent overcharge capacity relative to a negative electrode solely of the lithium-aluminum alloy, the ternary alloy comprising lithium, aluminum, and iron or cobalt, and an electrolyte containing lithium ions in contact with both of the positive and the negative electrodes. The ternary alloy is present in the electrode in the range of from about 5 percent to about 50 percent by weight of the electrode composition and may include lithium-aluminum-nickel alloy in combination with either the ternary iron or cobalt alloys. A plurality of series connected cells having overcharge capacity can be equalized on the discharge side without expensive electrical equipment.

  14. Radiation shielding composition

    DOE Patents [OSTI]

    Quapp, William J.; Lessing, Paul A.

    2000-12-26

    A composition for use as a radiation shield. The shield is a concrete product containing a stable uranium aggregate for attenuating gamma rays and a neutron absorbing component, the uranium aggregate and neutron absorbing component being present in the concrete product in sufficient amounts to provide a concrete having a density between about 4 and about 15 grams/cm.sup.3 and which will at a predetermined thickness, attenuate gamma rays and absorb neutrons from a radioactive material of projected gamma ray and neutron emissions over a determined time period. The composition is preferably in the form of a container for storing radioactive materials that emit gamma rays and neutrons. The concrete container preferably comprises a metal liner and/or a metal outer shell. The resulting radiation shielding container has the potential of being structurally sound, stable over a long period of time, and, if desired, readily mobile.

  15. Uncharged positive electrode composition

    DOE Patents [OSTI]

    Kaun, Thomas D.; Vissers, Donald R.; Shimotake, Hiroshi

    1977-03-08

    An uncharged positive-electrode composition contains particulate lithium sulfide, another alkali metal or alkaline earth metal compound other than sulfide, e.g., lithium carbide, and a transition metal powder. The composition along with a binder, such as electrolytic salt or a thermosetting resin is applied onto an electrically conductive substrate to form a plaque. The plaque is assembled as a positive electrode within an electrochemical cell opposite to a negative electrode containing a material such as aluminum or silicon for alloying with lithium. During charging, lithium alloy is formed within the negative electrode and transition metal sulfide such as iron sulfide is produced within the positive electrode. Excess negative electrode capacity over that from the transition metal sulfide is provided due to the electrochemical reaction of the other than sulfide alkali metal or alkaline earth metal compound.

  16. Radiation shielding composition

    DOE Patents [OSTI]

    Quapp, William J.; Lessing, Paul A.

    1998-01-01

    A composition for use as a radiation shield. The shield is a concrete product containing a stable uranium aggregate for attenuating gamma rays and a neutron absorbing component, the uranium aggregate and neutron absorbing component being present in the concrete product in sufficient amounts to provide a concrete having a density between about 4 and about 15 grams/cm.sup.3 and which will at a predetermined thickness, attenuate gamma rays and absorb neutrons from a radioactive material of projected gamma ray and neutron emissions over a determined time period. The composition is preferably in the form of a container for storing radioactive materials that emit gamma rays and neutrons. The concrete container preferably comprises a metal liner and/or a metal outer shell. The resulting radiation shielding container has the potential of being structurally sound, stable over a long period of time, and, if desired, readily mobile.

  17. Radiation shielding composition

    DOE Patents [OSTI]

    Quapp, W.J.; Lessing, P.A.

    1998-07-28

    A composition is disclosed for use as a radiation shield. The shield is a concrete product containing a stable uranium aggregate for attenuating gamma rays and a neutron absorbing component, the uranium aggregate and neutron absorbing component being present in the concrete product in sufficient amounts to provide a concrete having a density between about 4 and about 15 grams/cm{sup 3} and which will at a predetermined thickness, attenuate gamma rays and absorb neutrons from a radioactive material of projected gamma ray and neutron emissions over a determined time period. The composition is preferably in the form of a container for storing radioactive materials that emit gamma rays and neutrons. The concrete container preferably comprises a metal liner and/or a metal outer shell. The resulting radiation shielding container has the potential of being structurally sound, stable over a long period of time, and, if desired, readily mobile. 5 figs.

  18. Composite drill pipe

    DOE Patents [OSTI]

    Leslie, James C.; Leslie, II, James C.; Heard, James; Truong, Liem , Josephson; Marvin , Neubert; Hans

    2008-12-02

    A composite pipe segment is formed to include tapered in wall thickness ends that are each defined by opposed frustoconical surfaces conformed for self centering receipt and intimate bonding contact within an annular space between corresponding surfaces of a coaxially nested set of metal end pieces. The distal peripheries of the nested end pieces are then welded to each other and the sandwiched and bonded portions are radially pinned. The composite segment may include imbedded conductive leads and the axial end portions of the end pieces are shaped to form a threaded joint with the next pipe assembly that includes a contact ring in one pipe assembly pierced by a pointed contact in the other to connect the corresponding leads across the joint.

  19. Composite carbon foam electrode

    DOE Patents [OSTI]

    Mayer, S.T.; Pekala, R.W.; Kaschmitter, J.L.

    1997-05-06

    Carbon aerogels used as a binder for granulated materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivity and power to system energy. 1 fig.

  20. Composite carbon foam electrode

    DOE Patents [OSTI]

    Mayer, Steven T.; Pekala, Richard W.; Kaschmitter, James L.

    1997-01-01

    Carbon aerogels used as a binder for granularized materials, including other forms of carbon and metal additives, are cast onto carbon or metal fiber substrates to form composite carbon thin film sheets. The thin film sheets are utilized in electrochemical energy storage applications, such as electrochemical double layer capacitors (aerocapacitors), lithium based battery insertion electrodes, fuel cell electrodes, and electrocapacitive deionization electrodes. The composite carbon foam may be formed by prior known processes, but with the solid particles being added during the liquid phase of the process, i.e. prior to gelation. The other forms of carbon may include carbon microspheres, carbon powder, carbon aerogel powder or particles, graphite carbons. Metal and/or carbon fibers may be added for increased conductivity. The choice of materials and fibers will depend on the electrolyte used and the relative trade off of system resistivty and power to system energy.