National Library of Energy BETA

Sample records for declared force majeure

  1. EIA Report 9/12/08 - Hurricane Impacts on U.S. Oil & Natural...

    U.S. Energy Information Administration (EIA) Indexed Site

    With petroleum infrastructure shutdown prior to Hurricane Gustav returning to normal ... As Hurricane Ike approaches the Gulf of Mexico, many pipelines have declared force majeure ...

  2. Declared Wolf Creek

    Office of Environmental Management (EM)

    2015 Declaration Week ------------> 5-Jul 12-Jul 19-Jul 26-Jul 2-Aug 9-Aug 16-Aug 23-Aug 30-Aug 6-Sep 13-Sep 20-Sep 27-Sep 4-Oct 11-Oct 18-Oct 25-Oct 1-Nov 8-Nov 15-Nov 22-Nov 29-Nov 6-Dec 13-Dec 20-Dec 27-Dec 115% Nameplate Declared Wolf Creek UNIT 1 (MW) 52 45 52 52 52 52 52 52 52 52 52 52 52 UNIT 2 (MW) 52 45 52 52 52 52 52 52 52 52 52 52 52 52 52 UNIT 3 (MW) 52 45 UNIT 4 (MW) 52 45 52 52 52 52 52 52 52 52 52 52 52 52 52 UNIT 5 (MW) 52 45 UNIT 6 (MW) 52 45 52 52 52 52 52 52 52 52 52 52 52

  3. Joint Environmental Management System (EMS) Declaration of Conformance...

    Energy Savers [EERE]

    Services Environmental Management System Joint Environmental Management System (EMS) Declaration of Conformance Joint Environmental Management System (EMS) Declaration of...

  4. Natural Gas Weekly Update, Printer-Friendly Version

    Gasoline and Diesel Fuel Update (EIA)

    because Sabine Pipeline had declared a force majeure, which prevented or reduced gas flow operations at the hub. On Wednesday, October 12, prices at the Henry Hub averaged 13.76...

  5. Declaration Of Trust | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Declaration Of Trust Declaration Of Trust Our Bank Deposit Financial Assistance Program was developed for the purpose of strengthening and expanding the Nation's minority and women-owned small business enterprises. In order to classify as "minority" the institution's majority ownership must include African Americans, Hispanic Americans, Asian Americans, American Indians, Eskimos, Aleuts, and women. The minority institution must certify minority ownership with the Department of the

  6. Scanned_Joint_Declaration_(English).pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    English).pdf ScannedJointDeclaration(English).pdf PDF icon ScannedJointDeclaration(English).pdf More Documents & Publications Joint Statement by Energy Ministers of G8, The ...

  7. Scanned_Joint_Declaration_(Italian).pdf | Department of Energy

    Energy Savers [EERE]

    Italian).pdf Scanned_Joint_Declaration_(Italian).pdf PDF icon Scanned_Joint_Declaration_(Italian).pdf More Documents & Publications FTCP Face to Face Meeting - March 30, 2010 Introducción al Conocimiento de Energía Energy Education Resources in Spanish Get Current: Switch on Clean Energy Coloring Book

  8. Microsoft Word - EM-40 Feedback on FY 2012 ISMS Declaration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment 3 Explanation for Derivation of the site specific results for QAP Implementation as provided in Criterion 4 of Attachment 1 Submissions Several submittals (5 of 11) for the Quality Assurance (QA) declarations combined declarations between the Federal office and the site contractors. In addition, other submittals focused primarily on the ten summary items and not the individual Lines of Inquiry (LOIs) called out in the performance metrics tables. It is important that future submittals

  9. protective force

    National Nuclear Security Administration (NNSA)

    ntex%20-%20protective%20force%20-%20edited.jpg" alt"successfully completed a recent assessment by the U.S. Department " >

    Members of Pantex's Protective Force on...

  10. air force

    National Nuclear Security Administration (NNSA)

    en NNSA, Air Force Complete Successful B61-12 Life Extension Program Development Flight Test at Tonopah Test Range http:nnsa.energy.govmediaroompressreleases...

  11. Force sensor

    DOE Patents [OSTI]

    Grahn, Allen R. (Salt Lake City, UT)

    1993-01-01

    A force sensor and related method for determining force components. The force sensor includes a deformable medium having a contact surface against which a force can be applied, a signal generator for generating signals that travel through the deformable medium to the contact surface, a signal receptor for receiving the signal reflected from the contact surface, a generation controller, a reception controller, and a force determination apparatus. The signal generator has one or more signal generation regions for generating the signals. The generation controller selects and activates the signal generation regions. The signal receptor has one or more signal reception regions for receiving signals and for generating detections signals in response thereto. The reception controller selects signal reception regions and detects the detection signals. The force determination apparatus measures signal transit time by timing activation and detection and, optionally, determines force components for selected cross-field intersections. The timer which times by activation and detection can be any means for measuring signal transit time. A cross-field intersection is defined by the overlap of a signal generation region and a signal reception region.

  12. Force sensor

    DOE Patents [OSTI]

    Grahn, A.R.

    1993-05-11

    A force sensor and related method for determining force components is described. The force sensor includes a deformable medium having a contact surface against which a force can be applied, a signal generator for generating signals that travel through the deformable medium to the contact surface, a signal receptor for receiving the signal reflected from the contact surface, a generation controller, a reception controller, and a force determination apparatus. The signal generator has one or more signal generation regions for generating the signals. The generation controller selects and activates the signal generation regions. The signal receptor has one or more signal reception regions for receiving signals and for generating detections signals in response thereto. The reception controller selects signal reception regions and detects the detection signals. The force determination apparatus measures signal transit time by timing activation and detection and, optionally, determines force components for selected cross-field intersections. The timer which times by activation and detection can be any means for measuring signal transit time. A cross-field intersection is defined by the overlap of a signal generation region and a signal reception region.

  13. Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-08-26

    Establishes requirements for management and operation of the DOE Protective Force (PF), establishes requirements for firearms operations and defines the firearms courses of fire. Cancels: DOE M 473.2-1A DOE M 473.2-2

  14. Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-03-07

    The manual establishes requirements for management and operation of the DOE Protective Force, establishes requirements for firearms operations and defines the firearms courses of fire. Chg 1 dated 3/7/06. DOE M 470.4-3A cancels DOE M 470.4-3, Chg 1, Protective Force, dated 3-7-06, Attachment 2, Contractor Requirement Document (CRD) only (except for Section C). Chg 1, dated 3-7-06, cancels DOE M 470.4-3

  15. Lift Forces

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lift Forces in Bubbly Flows Thomas Daly ∗ , Sreekanth Pannala † , Arthur Ruggles ∗ ∗ Department of Nuclear Engineering, University of Tennessee, 315 Pasqua Engineering Building, Knoxville, TN, 37996-2300 † Oak Ridge National Laboratory, P.O. Box 2008, Bldg. 5700, MS 6164 Oak Ridge, TN 37831-6164 tdaly1@utk.edu, pannalas@ornl.gov, aruggles@utk.edu INTRODUCTION Multiphase flows are found in a variety of engineering systems, two of the most notable categories being energy pro- duction and

  16. Colorado - C.R.S. 24-65.1-101 - Legislative Declaration | Open...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Colorado - C.R.S. 24-65.1-101 - Legislative DeclarationLegal Abstract This section outlines the...

  17. Declaration of Charles Wodrich in Support of Supplemental Comments of the

    Office of Environmental Management (EM)

    Plumbing Manufacturers Institute Regarding the Economic Impacts of the Proposed Definition of "Showerhead," Docket No. EERE-2010-BT-NOA-0016 | Department of Energy Declaration of Charles Wodrich in Support of Supplemental Comments of the Plumbing Manufacturers Institute Regarding the Economic Impacts of the Proposed Definition of "Showerhead," Docket No. EERE-2010-BT-NOA-0016 Declaration of Charles Wodrich in Support of Supplemental Comments of the Plumbing Manufacturers

  18. EM-40 Feedback on FY 2012 QA Declaration | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Attachment 3 - Explanation for Derivation of the site specific results for QAP Implementation as provided in Criterion 4 of Attachment 1 PDF icon EM-40 Feedback on FY 2012 QA Declaration More Documents & Publications QA Corporate Board Meeting - November 2008 CPMS Tables QA Corporate Board Meeting - May 2012

  19. Protective Force Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30

    Provides detailed requirements to supplement DOE O 473.2, Protective Force Program, which establishes the requirements and responsibilities for management and operation of the Department of Energy (DOE) Protective Force (PF) Program. Does not cancel other directives.

  20. Administering Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-05-14

    The order provides requirements and responsibilities for administering work force discipline and corrective actions. Supersedes DOE O 3750.1.

  1. Integrating UF6 Cylinder RF Tracking With Continuous Load Cell Monitoring for Verifying Declared UF6 Feed and Withdrawal Operations Verifying Declared UF6 Feed and Withdrawal Operations

    SciTech Connect (OSTI)

    Krichinsky, Alan M; Miller, Paul; Pickett, Chris A; Richardson, Dave; Rowe, Nathan C; Whitaker, J Michael; Younkin, James R

    2009-01-01

    Oak Ridge National Laboratory is demonstrating the integration of UF6 cylinder tracking, using RF technology, with continuous load cell monitoring (CLCM) at mock UF6 feed and withdrawal (F&W) stations. CLCM and cylinder tracking are two of several continuous-monitoring technologies that show promise in providing integrated safeguards of F&W operations at enrichment plants. Integrating different monitoring technologies allows advanced, automated event processing to screen innocuous events thereby minimizing false alerts to independent inspectors. Traditionally, international inspectors rely on batch verification of material inputs and outputs derived from operator declarations and periodic on-site inspections at uranium enrichment plants or other nuclear processing facilities. Continuously monitoring F&W activities between inspections while providing filtered alerts of significant operational events will substantially increase the amount of valuable information available to inspectors thereby promising to enhance the effectiveness of safeguards and to improve efficiency in conducting on-site inspections especially at large plants for ensuring that all operations are declared.

  2. Microsoft Word - Declaration of Identity form for Privacy Act Requests.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DECLARATION OF IDENTITY FOR FREEDOM OF INFORMATION AND/OR PRIVACY ACT REQUESTS I, (please print)_____________________________________________, hereby request information pursuant to the Freedom of Information Act and/or Privacy Act. I verify that the information I am requesting pertains to me. I have attached a photocopy of two (2) identifying documents bearing my name and signature (one of which states my current home address and my date of birth). Mailing Address:

  3. Coulomb force as an entropic force

    SciTech Connect (OSTI)

    Wang Tower

    2010-05-15

    Motivated by Verlinde's theory of entropic gravity, we give a tentative explanation to the Coulomb's law with an entropic force. When trying to do this, we find the equipartition rule should be extended to charges and the concept of temperature should be reinterpreted. If one accepts the holographic principle as well as our generalizations and reinterpretations, then Coulomb's law, the Poisson equation, and the Maxwell equations can be derived smoothly. Our attempt can be regarded as a new way to unify the electromagnetic force with gravity, from the entropic origin. Possibly some of our postulates are related to the D-brane picture of black hole thermodynamics.

  4. Protective Force Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-12-20

    Provides detailed requirements to supplement DOE O 473.2, PROTECTIVE FORCE PROGRAM, which establishes the requirements and responsibilities for management and operation of the Department of Energy (DOE) Protective Force (PF) Program. Change 1 revised pages in Chapters IV and VI on 12/20/2001.

  5. Particles and Forces

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Strong Force. Quarks, Gluons and Co. 41 Quarks, Gluons and Co. 42 The End The animation Secret Worlds: The Universe Within can be found on the website of the National High...

  6. Three-body forces

    SciTech Connect (OSTI)

    Nefkens, B.M.K.

    1986-10-15

    A review of current knowledge of three-body forces from experimental and theoretical standpoints is given. The 3-H and 3-He nuclei are discussed. Also, nucleon scattering from deuterium is discussed. (AIP)

  7. Protective Force Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-02-13

    To prescribe Department of Energy policy, responsibilities, and requirements for the management and operation of the Protective Force Program. Chg 1 dated 2-13-95. Cancels DOE O 5632.7 and DOE O 5632.8.

  8. Federal Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-07-15

    This Manual establishes requirements for the management and operation of the Department of Energy (DOE) Federal protective forces (FPFs). Cancels DOE M 470.4-3, Chg 1. Canceled by DOE O 473.3.

  9. Reduction-in-Force

    Broader source: Energy.gov [DOE]

    Reduction in force (RIF) is a set of regulations and procedures that are used to determine whether an employee keeps his or her present position, or whether the employee has a right to another...

  10. Work Force Restructuring Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Force Restructuring Activities December 10, 2008 Note: Current updates are in bold # Planned Site/Contractor HQ Approved Separations Status General * LM has finalized the compilation of contractor management team separation data for the end of FY07 actuals and end of FY08 and FY09 projections. LM has submitted to Congress the FY 2007 Annual Report on contractor work force restructuring activities. The report has been posted to the LM website. *LM conducted a DOE complex-wide data call to the

  11. Direct Aerosol Forcing Uncertainty

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Mccomiskey, Allison

    2008-01-15

    Understanding sources of uncertainty in aerosol direct radiative forcing (DRF), the difference in a given radiative flux component with and without aerosol, is essential to quantifying changes in Earth's radiation budget. We examine the uncertainty in DRF due to measurement uncertainty in the quantities on which it depends: aerosol optical depth, single scattering albedo, asymmetry parameter, solar geometry, and surface albedo. Direct radiative forcing at the top of the atmosphere and at the surface as well as sensitivities, the changes in DRF in response to unit changes in individual aerosol or surface properties, are calculated at three locations representing distinct aerosol types and radiative environments. The uncertainty in DRF associated with a given property is computed as the product of the sensitivity and typical measurement uncertainty in the respective aerosol or surface property. Sensitivity and uncertainty values permit estimation of total uncertainty in calculated DRF and identification of properties that most limit accuracy in estimating forcing. Total uncertainties in modeled local diurnally averaged forcing range from 0.2 to 1.3 W m-2 (42 to 20%) depending on location (from tropical to polar sites), solar zenith angle, surface reflectance, aerosol type, and aerosol optical depth. The largest contributor to total uncertainty in DRF is usually single scattering albedo; however decreasing measurement uncertainties for any property would increase accuracy in DRF. Comparison of two radiative transfer models suggests the contribution of modeling error is small compared to the total uncertainty although comparable to uncertainty arising from some individual properties.

  12. Protective Force Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30

    Establishes policy, requirements, responsibilities, and authorities, for the management and operation of the Department of Energy (DOE) Protective Force (PF) Program. Extended until 7-7-06 by DOE N 251.64, dated 7-7-05 Cancels: DOE 5632.7A

  13. Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1983-03-23

    The order provides guidance and procedures and states responsibilities for maintaining work force discipline in DOE. Chg 1, dated 3-11-85; Chg 2, dated 1-6-86; Chg 3, dated 3-21-89; Chg 4, dated 8-2-90; Chg 5, dated 3-9-92; Chg 6, dated 8-21-92, cancels Chg 5.

  14. Contractor Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-11-05

    This Manual establishes requirements for the management and operation of the U.S. Department of Energy contractor protective forces. Cancels: DOE M 470.4-3 Chg 1, CRD (Attachment 2) only, except for Section C. Canceled by DOE O 473.3.

  15. Force Modulator System

    SciTech Connect (OSTI)

    Redmond Clark

    2009-04-30

    Many metal parts manufacturers use large metal presses to shape sheet metal into finished products like car body parts, jet wing and fuselage surfaces, etc. These metal presses take sheet metal and - with enormous force - reshape the metal into a fully formed part in a manner of seconds. Although highly efficient, the forces involved in forming metal parts also damage the press itself, limit the metals used in part production, slow press operations and, when not properly controlled, cause the manufacture of large volumes of defective metal parts. To date, the metal-forming industry has not been able to develop a metal-holding technology that allows full control of press forces during the part forming process. This is of particular importance in the automotive lightweighting efforts under way in the US automotive manufacturing marketplace. Metalforming Controls Technology Inc. (MC2) has developed a patented press control system called the Force Modulator that has the ability to control these press forces, allowing a breakthrough in stamping process control. The technology includes a series of hydraulic cylinders that provide controlled tonnage at all points in the forming process. At the same time, the unique cylinder design allows for the generation of very high levels of clamping forces (very high tonnages) in very small spaces; a requirement for forming medium and large panels out of HSS and AHSS. Successful production application of these systems testing at multiple stamping operations - including Ford and Chrysler - has validated the capabilities and economic benefits of the system. Although this technology has been adopted in a number of stamping operations, one of the primary barriers to faster adoption and application of this technology in HSS projects is system cost. The cost issue has surfaced because the systems currently in use are built for each individual die as a custom application, thus driving higher tooling costs. This project proposed to better marry the die-specific Force Modulator technology with stamping presses in the form of a press cushion. This system would be designed to operate the binder ring for multiple parts, thus cutting the per-die cost of the technology. This study reports the results of technology field application. This project produced the following conclusions: (1) The Force Modulator system is capable of operating at very high tempos in the stamping environment; (2) The company can generate substantial, controlled holding tonnage (binder ring pressure) necessary to hold high strength steel parts for proper formation during draw operations; (3) A single system can be designed to operate with a family of parts, thus significantly reducing the per-die cost of a FM system; (4) High strength steel parts made with these systems appear to show significant quality improvements; (5) The amounts of steel required to make these parts is typically less than the amounts required with traditional blank-holding technologies; and (6) This technology will aid in the use of higher strength steels in auto and truck production, thus reducing weight and improving fuel efficiency.

  16. hickam air force base

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hickam air force base - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  17. TEXT Pro Force Training

    Energy Savers [EERE]

    Basic Protective Force Training Program DOE/IG-0641 March 2004 * None of the 10 sites included instruction in rappelling even though it was part of the special response team core curriculum and continued to be offered by the Nonprolif- eration and National Security Institute; * Only one site conducted basic training on use of a shotgun, despite the fact that a num- ber of sites used the weapon for breaching exercises and other purposes; and, * Seven of the sites modified prescribed training

  18. ARMY SERVICE FORCES

    Office of Legacy Management (LM)

    ARMY SERVICE FORCES ' -, 1 MANHATTAN ENGINEER DISTRICT --t 4 IN "LPLI RC,' LR io EIDM CIS INTELLIGENCE AND SECURITY DIVISION CHICAGO BRANCH OFFICE i ., -,* - P. 0. Box 6770-A I ' 1 .' CHICAGO 80. ILLINOIS /lvb 15 February 1945 Subject: shipment Security Survey at &Uinckrodt Chemical Works. MEMORANDUM to the Officer in Charge. 1. The Mallinckrodt Chemical Works, St. Louis, Missouri, was contacted by the undersigned on 16 November 1944, for the purpose of -king an investigation to

  19. Atomic Force Microscope

    SciTech Connect (OSTI)

    Day, R.D.; Russell, P.E.

    1988-12-01

    The Atomic Force Microscope (AFM) is a recently developed instrument that has achieved atomic resolution imaging of both conducting and non- conducting surfaces. Because the AFM is in the early stages of development, and because of the difficulty of building the instrument, it is currently in use in fewer than ten laboratories worldwide. It promises to be a valuable tool for obtaining information about engineering surfaces and aiding the .study of precision fabrication processes. This paper gives an overview of AFM technology and presents plans to build an instrument designed to look at engineering surfaces.

  20. Miniature quartz resonator force transducer

    DOE Patents [OSTI]

    EerNisse, E.P.

    The invention relates to a piezoelectric quartz force transducer having the shape of a double-ended tuning fork.

  1. Miniature quartz resonator force transducer

    DOE Patents [OSTI]

    Eer Nisse, Errol P.

    1980-01-01

    The invention relates to a piezoelectric quartz force transducer having the shape of a double-ended tuning fork.

  2. Lessons Learned at the Idaho National Laboratory for the Entry into Force of the U.S. Additional Protocol

    SciTech Connect (OSTI)

    Jeffrey C. Joe; Shauna A. Hoiland

    2009-07-01

    For a number of years, the Idaho National Laboratory (INL) has been preparing for the entry into force of the U.S. Additional Protocol (AP). These preparations included attending training, participating in tabletop exercises, preparing draft declarations, developing INL-specific guidance documents, preparing for and hosting a mock complementary access visit, and preparing declarations for official submittal. All of these activities, the training materials, and software developed by other U.S. DOE national laboratories (PNNL, ORNL, LANL, and BNL) were very helpful in preparing for the entry into force of the AP. As with any endeavor of this size and complexity, however, there are always instances where even the best preparations and advanced planning do not anticipate every challenge. As the DOE's lead nuclear energy research and development facility, the INL faced many unique challenges. The majority of research conducted at the INL is nuclear fuel cycle related, most of which is not protected by the National Security Exclusion. This paper describes the lessons learned from the INLs experience of preparing for the entry into force of the AP, specifically how translating and implementing general principles into actual activities proved to be one of many challenges, and provides general suggestions on how to respond effectively and efficiently to routine annual data calls and other AP requests.

  3. Normal Force and Drag Force in Magnetorheological Finishing

    SciTech Connect (OSTI)

    Miao, C.; Shafrir, S.N.; Lambropoulos, J.C.; Jacobs, S.D.

    2010-01-13

    The material removal in magnetorheological finishing (MRF) is known to be controlled by shear stress, tau, which equals drag force, Fd, divided by spot area, As. However, it is unclear how the normal force, Fn, affects the material removal in MRF and how the measured ratio of drag force to normal force Fd/Fn, equivalent to coefficient of friction, is related to material removal. This work studies, for the first time for MRF, the normal force and the measured ratio Fd/Fn as a function of material mechanical properties. Experimental data were obtained by taking spots on a variety of materials including optical glasses and hard ceramics with a spot-taking machine (STM). Drag force and normal force were measured with a dual load cell. Drag force decreases linearly with increasing material hardness. In contrast, normal force increases with hardness for glasses, saturating at high hardness values for ceramics. Volumetric removal rate decreases with normal force across all materials. The measured ratio Fd/Fn shows a strong negative linear correlation with material hardness. Hard materials exhibit a low coefficient of friction. The volumetric removal rate increases with the measured ratio Fd/Fn which is also correlated with shear stress, indicating that the measured ratio Fd/Fn is a useful measure of material removal in MRF.

  4. Air Force Renewable Energy Programs

    Broader source: Energy.gov [DOE]

    Presentation covers Air Force Renewable Energy Programs and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting.

  5. Continuous Forcing Data, Darwin, Australia

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    2010-09-22

    Long term, large scale continuous forcing data set for three complete wet seasons (2004-2005, 2005-2006 and 2006-2007) in Darwin, Australia.

  6. Army Energy Initiatives Task Force

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentationgiven at the Fall 2011 Federal Utility Partnership Working Group (FUPWG) meetingcovers the Army Energy Initiatives Task Force.

  7. Force As A Momentum Current

    SciTech Connect (OSTI)

    Munera, Hector A.

    2010-07-28

    Advantages of a neo-Cartesian approach to classical mechanics are noted. If conservation of linear momentum is the fundamental principle, Newton's three laws become theorems. A minor paradox in static Newtonian mechanics is identified, and solved by reinterpreting force as a current of momentum. Contact force plays the role of a mere midwife in the exchange of momentum; however, force cannot be eliminated from physics because it provides the numerical value for momentum current. In this sense, in a neo-Cartesian formulation of mechanics the concept of force becomes strengthened rather than weakened.

  8. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V. C.; Wang, Chengpu

    2006-08-22

    An atomic force microscope is described having a cantilever comprising a base and a probe tip on an end opposite the base; a cantilever drive device connected to the base; a magnetic material coupled to the probe tip, such that when an incrementally increasing magnetic field is applied to the magnetic material an incrementally increasing force will be applied to the probe tip; a moveable specimen base; and a controller constructed to obtain a profile height of a specimen at a point based upon a contact between the probe tip and a specimen, and measure an adhesion force between the probe tip and the specimen by, under control of a program, incrementally increasing an amount of a magnetic field until a release force, sufficient to break the contact, is applied. An imaging method for atomic force microscopy involving measuring a specimen profile height and adhesion force at multiple points within an area and concurrently displaying the profile and adhesion force for each of the points is also described. A microscope controller is also described and is constructed to, for a group of points, calculate a specimen height at a point based upon a cantilever deflection, a cantilever base position and a specimen piezo position; calculate an adhesion force between a probe tip and a specimen at the point by causing an incrementally increasing force to be applied to the probe tip until the probe tip separates from a specimen; and move the probe tip to a new point in the group.

  9. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V.; Wang, Chengpu

    2004-11-16

    An atomic force microscope is described having a cantilever comprising a base and a probe tip on an end opposite the base; a cantilever drive device connected to the base; a magnetic material coupled to the probe tip, such that when an incrementally increasing magnetic field is applied to the magnetic material an incrementally increasing force will be applied to the probe tip; a moveable specimen base; and a controller constructed to obtain a profile height of a specimen at a point based upon a contact between the probe tip and a specimen, and measure an adhesion force between the probe tip and the specimen by, under control of a program, incrementally increasing an amount of a magnetic field until a release force, sufficient to break the contact, is applied. An imaging method for atomic force microscopy involving measuring a specimen profile height and adhesion force at multiple points within an area and concurrently displaying the profile and adhesion force for each of the points is also described. A microscope controller is also described and is constructed to, for a group of points, calculate a specimen height at a point based upon a cantilever deflection, a cantilever base position and a specimen piezo position; calculate an adhesion force between a probe tip and a specimen at the point by causing an incrementally increasing force to be applied to the probe tip until the probe tip separates from a specimen; and move the probe tip to a new point in the group.

  10. Continuous Forcing Data, Darwin, Australia

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    Long term, large scale continuous forcing data set for three complete wet seasons (2004-2005, 2005-2006 and 2006-2007) in Darwin, Australia.

  11. EIA - Daily Report 9/30/05 - Hurricane Impacts on U.S. Oil &...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... region, which is currently approximately 2,235 MMcfd. Sabine Pipeline, operator of the Henry Hub, is continuing its Force Majeure until further notice (See September 28 Report)

  12. AIR FORCE SPECIAL WEAPONS CENTER

    Office of Legacy Management (LM)

    HEADQUARTERS aII?y 9 AIR FORCE SPECIAL WEAPONS CENTER 1 AIR FORCE SYSTEMS COMMAND . - KlRTlAND AIR FORCE BASE, NEW MEXICO - k FINAL REPORT O N AIR FORCE PARTICIPATION PROJECT RULISON .1 O c t o b e r 1969 P r e p a r e d by : CONT INENTAL TEST D I V I S ION DIRECTORATE OF NUCLEAR FIELD OPERATIONS This page intentionally left blank INDEX AIR FORCE PARTICIPATION I N PROJECT RULISON FINAL REPORT PARAGRAPH BASIC REPORT SUBJECT R e f e r e n c e s PAGE 2 G e n e r a l 1 3 P l a n n i n g 3 4 Command

  13. Air Force Enhanced Use Lease

    Broader source: Energy.gov [DOE]

    Presentationgiven at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meetingdiscusses the U.S. Air Force's (USAF's) enhanced use leases (EULs), including energy EULs and EUL goals.

  14. Interagency Energy Management Task Force

    Broader source: Energy.gov [DOE]

    The Federal Interagency Energy Management Task Force was created by the Federal Energy Management Improvement Act of 1988 to coordinate Federal government activities that encourage energy conservation and energy efficiency.

  15. Sensing mode atomic force microscope

    DOE Patents [OSTI]

    Hough, Paul V. C.; Wang, Chengpu

    2003-01-01

    An atomic force microscope utilizes a pulse release system and improved method of operation to minimize contact forces between a probe tip affixed to a flexible cantilever and a specimen being measured. The pulse release system includes a magnetic particle affixed proximate the probe tip and an electromagnetic coil. When energized, the electromagnetic coil generates a magnetic field which applies a driving force on the magnetic particle sufficient to overcome adhesive forces exhibited between the probe tip and specimen. The atomic force microscope includes two independently displaceable piezo elements operable along a Z-axis. A controller drives the first Z-axis piezo element to provide a controlled approach between the probe tip and specimen up to a point of contact between the probe tip and specimen. The controller then drives the first Z-axis piezo element to withdraw the cantilever from the specimen. The controller also activates the pulse release system which drives the probe tip away from the specimen during withdrawal. Following withdrawal, the controller adjusts the height of the second Z-axis piezo element to maintain a substantially constant approach distance between successive samples.

  16. Task Force Approach | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Task Force Approach Task Force Approach Task Force Approach Results of the ARI Task Force: The purpose of the ARI Task Force is to 1) identify, prioritize, and resolve issues to enable sites and programs to implement revitalization efforts more effectively and 2) to facilitate programmatic incorporation of revitalization concepts into DOE's programmatic business environments. The Task Force must do this through coordinating and facilitating communication and connections, sharing lessons learned,

  17. Automatic HTS force measurement instrument

    DOE Patents [OSTI]

    Sanders, S.T.; Niemann, R.C.

    1999-03-30

    A device is disclosed for measuring the levitation force of a high temperature superconductor sample with respect to a reference magnet includes a receptacle for holding several high temperature superconductor samples each cooled to superconducting temperature. A rotatable carousel successively locates a selected one of the high temperature superconductor samples in registry with the reference magnet. Mechanism varies the distance between one of the high temperature superconductor samples and the reference magnet, and a sensor measures levitation force of the sample as a function of the distance between the reference magnet and the sample. A method is also disclosed. 3 figs.

  18. Automatic HTS force measurement instrument

    DOE Patents [OSTI]

    Sanders, Scott T. (Valparaiso, IN); Niemann, Ralph C. (Downers Grove, IL)

    1999-01-01

    A device for measuring the levitation force of a high temperature superconductor sample with respect to a reference magnet includes a receptacle for holding several high temperature superconductor samples each cooled to superconducting temperature. A rotatable carousel successively locates a selected one of the high temperature superconductor samples in registry with the reference magnet. Mechanism varies the distance between one of the high temperature superconductor samples and the reference magnet, and a sensor measures levitation force of the sample as a function of the distance between the reference magnet and the sample. A method is also disclosed.

  19. Task Force on Biofuels Infrastructure

    Broader source: Energy.gov [DOE]

    Under the federal Renewable Fuels Standard (RFS) adopted in 2005 and amended in 2007, the United States is committed to a substantial (five-fold) increase in its use of biofuels by 2022. The National Commission on Energy Policy (NCEP) convened a Biofuels Infrastructure Task Force in 2008 to examine the infrastructure implications of this relatively swift and unprecedented shift in the composition of the nation’s transportation fuel supply. Specifically, the Task Force explored issues and developed recommendations for advancing the infrastructure investments needed to support timely and cost-effective implementation of the current biofuels mandate.

  20. Biofuels Task Force.pdf

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TASK FORCE ON BIOFUELS INFRASTRUCTURE N A T I O N A L C O M M I S S I O N O N E N E R G Y P O L I C Y ' S Disclaimer This report is a product of a Task Force with participants of diverse expertise and affi liations, addressing many complex and contentious topics. It is inevitable that arriving at a consensus document in these circumstances entailed compromises. Accordingly, it should not be as- sumed that every member is entirely satisfi ed with every formulation in this document, or even that

  1. Casimir force in absorbing multilayers

    SciTech Connect (OSTI)

    Tomas, M.S.

    2002-11-01

    The Casimir effect in a dispersive and absorbing multilayered system is considered adopting the (net) vacuum-field pressure point of view to the Casimir force. Using the properties of the macroscopic field operators appropriate for absorbing systems and a convenient compact form of the Green function for a multilayer, a straightforward and transparent derivation of the Casimir force in a lossless layer of an otherwise absorbing multilayer is presented. The resulting expression, in terms of the reflection coefficients of the surrounding stacks of layers, is of the same form as that obtained by Zhou and Spruch for a purely dispersive multilayer using the (surface) mode summation method [Phys. Rev. A 52, 297 (1995)]. Owing to the recursion relations that the generalized Fresnel coefficients satisfy, this result can be applied to more complex systems with planar symmetry. This is illustrated by calculating the Casimir force on a dielectric (metallic) slab in a planar cavity with realistic mirrors. Also, a relationship between the Casimir force and energy in two different layers is established.

  2. Task force cover.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the Exposure Scenarios Task Force Submitted to: U.S. Department of Energy U.S. Environmental Protection Agency Washington Department of Ecology December 2002 Sponsored by the Hanford Advisory Board, U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington Department of Ecology Table of Contents History................................................................................................................................. 2 Why an Exposure Scenarios Task

  3. October 9, 2014- SEAB Task Force Meeting

    Broader source: Energy.gov [DOE]

    SECRETARY OF ENERGY ADVISORY BOARDTask Force Meeting on Technology Development for Environmental Management (EM)

  4. Solvent-induced forces in protein folding

    SciTech Connect (OSTI)

    Ben-Naim, A. (Hebrew Univ., Jerusalem (Israel))

    1990-08-23

    The solvent-induced forces between various groups on the protein are examined. It is found that the intramolecular hydrophilic forces are likely to be the strongest forces mediated through the solvent. It is argued that these are probably the most important solvent-induced driving forces in the process of protein folding.

  5. Kelvin Probe Force Microscopy in liquid using Electrochemical Force Microscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Collins, Liam; Jesse, Stephen; Kilpatrick, J.; Tselev, Alexander; Okatan, Mahmut Baris; Kalinin, Sergei V.; Rodriguez, Brian

    2015-01-01

    Conventional closed loop-Kelvin probe force microscopy (KPFM) has emerged as a powerful technique for probing electric and transport phenomena at the solid-gas interface. The extension of KPFM capabilities to probe electrostatic and electrochemical phenomena at the solid–liquid interface is of interest for a broad range of applications from energy storage to biological systems. However, the operation of KPFM implicitly relies on the presence of a linear lossless dielectric in the probe-sample gap, a condition which is violated for ionically-active liquids (e.g., when diffuse charge dynamics are present). Here, electrostatic and electrochemical measurements are demonstrated in ionically-active (polar isopropanol, milli-Q watermore » and aqueous NaCl) and ionically-inactive (non-polar decane) liquids by electrochemical force microscopy (EcFM), a multidimensional (i.e., bias- and time-resolved) spectroscopy method. In the absence of mobile charges (ambient and non-polar liquids), KPFM and EcFM are both feasible, yielding comparable contact potential difference (CPD) values. In ionically-active liquids, KPFM is not possible and EcFM can be used to measure the dynamic CPD and a rich spectrum of information pertaining to charge screening, ion diffusion, and electrochemical processes (e.g., Faradaic reactions). EcFM measurements conducted in isopropanol and milli-Q water over Au and highly ordered pyrolytic graphite electrodes demonstrate both sample- and solvent-dependent features. Finally, the feasibility of using EcFM as a local force-based mapping technique of material-dependent electrostatic and electrochemical response is investigated. The resultant high dimensional dataset is visualized using a purely statistical approach that does not require a priori physical models, allowing for qualitative mapping of electrostatic and electrochemical material properties at the solid–liquid interface.« less

  6. Hickam Air Force Base | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Validation » Hickam Air Force Base Hickam Air Force Base Photo of hybrid fuel cell bus at Hickam Air Force Base Hickam Air Force Base spans 2,850 acres in Honolulu, Hawaii. The military base is home to the 15th Airlift Wing, the Hawaii Air National Guard, and the Pacific Air Forces headquarters. With support from the Hawaii Center for Advanced Transportation Technologies and the Air Force Advanced Power Technology Office, Hickam added a fuel cell hybrid electric bus to its fleet in

  7. ARMY SERiWE FORCES

    Office of Legacy Management (LM)

    ' This doc~omnt consists tif-..$---..-- PaWs ?5-i3s4 " No.,J ______ d&---.copies. series.-f;;i, ' ARMY SERiWE FORCES UNITED STATES ' ENGINEER OFFICE MANHP.~AN Dwmtcr CHIWOO A\RU o,,,c* P. 0. 90x 3140 A CHICA so, ILrlNole 20 June 1945 F' '2 0 Subject: Licenae Agreement - International Pulverizing Corporation - Subcoritract #7401-37-82. To: The District~Eqinssr, U. S. Engineer Office, Manhattan District, Oak Ridge, Tennessee. Attention: Contract Section. As llsted'below, there are

  8. US Wind Force LLC | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: US Wind Force LLC Place: Wexford, Pennsylvania Zip: PA 15090-9 Sector: Wind energy Product: US Wind Force, LLC is an independent, privately...

  9. CASL - Lift Forces in Bubbly Flows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CD-adapco's Star-CCM+, and RPI's NPHAS E-CMFD, implement Auton's shear lift model 5 and Antal's wall force model 7 as the two primary lift forces. All allow the user to...

  10. Link Force Holdings Ltd | Open Energy Information

    Open Energy Info (EERE)

    search Name: Link Force Holdings Ltd Place: China Product: China-based energy saving LED street light maker. References: Link Force Holdings Ltd1 This article is a stub. You...

  11. Hill Air Force Base | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hill Air Force Base Hill Air Force Base Hill Air Force Base Overview Energy savings performance contracting at Hill Air Force Base generated much interest during a recent training session on energy management that downlinked 12 Department of Defense sites. Energy systems in 940 buildings on the Base will be upgraded under an 18-year ESPC between the Government and the energy service company, CES/Way. Improvements are distributed over five task orders that will be completed in five years, with

  12. Micromechanism linear actuator with capillary force sealing

    DOE Patents [OSTI]

    Sniegowski, Jeffry J. (Albuquerque, NM)

    1997-01-01

    A class of micromachine linear actuators whose function is based on gas driven pistons in which capillary forces are used to seal the gas behind the piston. The capillary forces also increase the amount of force transmitted from the gas pressure to the piston. In a major subclass of such devices, the gas bubble is produced by thermal vaporization of a working fluid. Because of their dependence on capillary forces for sealing, such devices are only practical on the sub-mm size scale, but in that regime they produce very large force times distance (total work) values.

  13. Hyperbaric hydrothermal atomic force microscope

    DOE Patents [OSTI]

    Knauss, Kevin G. (Livermore, CA); Boro, Carl O. (Milpitas, CA); Higgins, Steven R. (Laramie, WY); Eggleston, Carrick M. (Laramie, WY)

    2002-01-01

    A hyperbaric hydrothermal atomic force microscope (AFM) is provided to image solid surfaces in fluids, either liquid or gas, at pressures greater than normal atmospheric pressure. The sample can be heated and its surface imaged in aqueous solution at temperatures greater than 100.degree. C. with less than 1 nm vertical resolution. A gas pressurized microscope base chamber houses the stepper motor and piezoelectric scanner. A chemically inert, flexible membrane separates this base chamber from the sample cell environment and constrains a high temperature, pressurized liquid or gas in the sample cell while allowing movement of the scanner. The sample cell is designed for continuous flow of liquid or gas through the sample environment.

  14. Hyperbaric Hydrothermal Atomic Force Microscope

    DOE Patents [OSTI]

    Knauss, Kevin G. (Livermore, CA); Boro, Carl O. (Milpitas, CA); Higgins, Steven R. (Laramie, WY); Eggleston, Carrick M. (Laramie, WY)

    2003-07-01

    A hyperbaric hydrothermal atomic force microscope (AFM) is provided to image solid surfaces in fluids, either liquid or gas, at pressures greater than normal atmospheric pressure. The sample can be heated and its surface imaged in aqueous solution at temperatures greater than 100.degree. C. with less than 1 nm vertical resolution. A gas pressurized microscope base chamber houses the stepper motor and piezoelectric scanner. A chemically inert, flexible membrane separates this base chamber from the sample cell environment and constrains a high temperature, pressurized liquid or gas in the sample cell while allowing movement of the scanner. The sample cell is designed for continuous flow of liquid or gas through the sample environment.

  15. Dark Forces At The Tevatron

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Buckley, Matt; Fileviez Perez, Pavel; Hooper, Dan; Neil, Ethan

    2011-08-19

    A simple explanation of the W + dijet excess recently reported by the CDF collaboration involves the introduction of a new gauge boson with sizable couplings to quarks, but with no or highly suppressed couplings to leptons. Anomaly-free theories which include such a leptophobic gauge boson must also include additional particle content, which may include a stable and otherwise viable candidate for dark matter. Based on the couplings and mass of the Z` required to generate the CDF excess, we predict such a dark matter candidate to possess an elastic scattering cross section with nucleons on the order of σmore » ~ 10-40 cm2, providing a natural explanation for the signals reported by the CoGeNT and DAMA/LIBRA collaborations. In this light, CDF may be observing the gauge boson responsible for the force which mediates the interactions between the dark and visible matter of our universe.« less

  16. CCS Task Force - Executive Summary | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CCS Task Force - Executive Summary CCS Task Force - Executive Summary PDF icon CCS Task Force - Executive Summary More Documents & Publications CCSTF - Final Report Before the ...

  17. Casimir force between integrable and chaotic pistons

    SciTech Connect (OSTI)

    Alvarez, Ezequiel; Mazzitelli, Francisco D.; Wisniacki, Diego A. [Departamento de Fisica, Facultad de Ciencias Exactas y Naturales Universidad de Buenos Aires, and Instituto de Fisica de Buenos Aires, Concejo Nacional de Investigaciones Cientificas y Tecnicas, Ciudad Universitaria, Pabellon I, 1428 Buenos Aires (Argentina); Monastra, Alejandro G. [Gerencia de Investigacion y Aplicaciones, Comision Nacional de Energia Atomica, Concejo Nacional de Investigaciones Cientificas y Tecnicas, Avenida General Paz 1499, 1650 San Martin (Argentina)

    2010-11-15

    We have computed numerically the Casimir force between two identical pistons inside a very long cylinder, considering different shapes for the pistons. The pistons can be considered quantum billiards, whose spectrum determines the vacuum force. The smooth part of the spectrum fixes the force at short distances and depends only on geometric quantities like the area or perimeter of the piston. However, correcting terms to the force, coming from the oscillating part of the spectrum which is related to the classical dynamics of the billiard, could be qualitatively different for classically integrable or chaotic systems. We have performed a detailed numerical analysis of the corresponding Casimir force for pistons with regular and chaotic classical dynamics. For a family of stadium billiards, we have found that the correcting part of the Casimir force presents a sudden change in the transition from regular to chaotic geometries. This suggests that there could be signatures of quantum chaos in the Casimir effect.

  18. AP Declaration Helper : Home

    National Nuclear Security Administration (NNSA)

    Announcements: Get Help with the IAEA Additional Protocol Because you are reading this web page, there is a good chance that you already know about the Additional Protocol (AP)...

  19. Declared Wolf Creek

    Energy Savers [EERE]

    761 761 761 761 761 761 761 761 761 761 761 761 761 761 761 761 761 761 761 761 761 CONT CAP SURPLSFALL 0 10 84 84 84 3 -9 -72 -35 -205 -167 -256 -219 -190 -190 -190 -190 -190...

  20. ARM - PI Product - Direct Aerosol Forcing Uncertainty

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsDirect Aerosol Forcing Uncertainty ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Direct Aerosol Forcing Uncertainty Understanding sources of uncertainty in aerosol direct radiative forcing (DRF), the difference in a given radiative flux component with and without aerosol, is essential to quantifying changes in Earth's radiation budget. We examine the uncertainty in DRF due to measurement

  1. DOE Contractor Work Force Restructuring Approval Thresholds

    Energy Savers [EERE]

    Contractor Work Force Restructuring Approval Thresholds Up to 100 employees Contractor can make decision bit must notify DOE of intent of restructuring 101-200 employees DOENNSA...

  2. Weardale Task Force | Open Energy Information

    Open Energy Info (EERE)

    that is developing a sustainable community in the East gate area which will be run on wind, solar, biomass, geothermal and hydro power. References: Weardale Task Force1...

  3. Interagency Energy Management Task Force Members

    Broader source: Energy.gov [DOE]

    The Interagency Energy Management Task Force is led by the Federal Energy Management Program director. Members include energy and sustainability managers from federal agencies.

  4. Sandia Energy - Air Force Research Laboratory Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from the Air Force Research Laboratory in Albuquerque utilized the site at the National Solar Thermal Test Facility to evaluate seismic and optical activity from explosives set...

  5. Sandia Energy - Air Force Research Laboratory Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Air Force Research Laboratory (AFRL) in Albuquerque utilized the site at the National Solar Thermal Test Facility (NSTTF) to evaluate seismic and optical activity from...

  6. Elastic actuator for precise force control

    DOE Patents [OSTI]

    Pratt, Gill A. (Lexington, MA); Williamson, Matthew M. (Boston, MA)

    1997-07-22

    The invention provides an elastic actuator consisting of a motor and a motor drive transmission connected at an output of the motor. An elastic element is connected in series with the motor drive transmission, and this elastic element is positioned to alone support the full weight of any load connected at an output of the actuator. A single force transducer is positioned at a point between a mount for the motor and an output of the actuator. This force transducer generates a force signal, based on deflection of the elastic element, that indicates force applied by the elastic element to an output of the actuator. An active feedback force control loop is connected between the force transducer and the motor for controlling the motor. This motor control is based on the force signal to deflect the elastic element an amount that produces a desired actuator output force. The produced output force is substantially independent of load motion. The invention also provides a torsional spring consisting of a flexible structure having at least three flat sections each connected integrally with and extending radially from a central section. Each flat section extends axially along the central section from a distal end of the central section to a proximal end of the central section.

  7. NREL: Measurements and Characterization - Atomic Force Microscopy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atomic Force Microscopy Atomic Force Microscopy (AFM) operates in several modes. In contact mode, a tip that is attached to a cantilever is scanned over the sample surface, while the force between tip and sample is measured. While the tip is scanned laterally, the force is kept constant by moving the cantilever/tip assembly up and down, so that the deflection of the cantilever is kept constant. The vertical movement of the cantilever/tip assembly is recorded and used to generate an image of the

  8. Elastic actuator for precise force control

    DOE Patents [OSTI]

    Pratt, G.A.; Williamson, M.M.

    1997-07-22

    The invention provides an elastic actuator consisting of a motor and a motor drive transmission connected at an output of the motor. An elastic element is connected in series with the motor drive transmission, and this elastic element is positioned to alone support the full weight of any load connected at an output of the actuator. A single force transducer is positioned at a point between a mount for the motor and an output of the actuator. This force transducer generates a force signal, based on deflection of the elastic element, that indicates force applied by the elastic element to an output of the actuator. An active feedback force control loop is connected between the force transducer and the motor for controlling the motor. This motor control is based on the force signal to deflect the elastic element an amount that produces a desired actuator output force. The produced output force is substantially independent of load motion. The invention also provides a torsional spring consisting of a flexible structure having at least three flat sections each connected integrally with and extending radially from a central section. Each flat section extends axially along the central section from a distal end of the central section to a proximal end of the central section. 30 figs.

  9. NM Renewable Energy Storage Task Force

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewable Energy Storage Task Force - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future ...

  10. An improved proximity force approximation for electrostatics

    SciTech Connect (OSTI)

    Fosco, Cesar D.; Instituto Balseiro, Universidad Nacional de Cuyo, R8402AGP Bariloche ; Lombardo, Fernando C.; IFIBA ; Mazzitelli, Francisco D.

    2012-08-15

    A quite straightforward approximation for the electrostatic interaction between two perfectly conducting surfaces suggests itself when the distance between them is much smaller than the characteristic lengths associated with their shapes. Indeed, in the so called 'proximity force approximation' the electrostatic force is evaluated by first dividing each surface into a set of small flat patches, and then adding up the forces due two opposite pairs, the contributions of which are approximated as due to pairs of parallel planes. This approximation has been widely and successfully applied in different contexts, ranging from nuclear physics to Casimir effect calculations. We present here an improvement on this approximation, based on a derivative expansion for the electrostatic energy contained between the surfaces. The results obtained could be useful for discussing the geometric dependence of the electrostatic force, and also as a convenient benchmark for numerical analyses of the tip-sample electrostatic interaction in atomic force microscopes. - Highlights: Black-Right-Pointing-Pointer The proximity force approximation (PFA) has been widely used in different areas. Black-Right-Pointing-Pointer The PFA can be improved using a derivative expansion in the shape of the surfaces. Black-Right-Pointing-Pointer We use the improved PFA to compute electrostatic forces between conductors. Black-Right-Pointing-Pointer The results can be used as an analytic benchmark for numerical calculations in AFM. Black-Right-Pointing-Pointer Insight is provided for people who use the PFA to compute nuclear and Casimir forces.

  11. MEAM interatomic force calculation subroutine for LAMMPS

    Energy Science and Technology Software Center (OSTI)

    2010-10-25

    Interatomic force and energy calculation subroutine tobe used with the molecular dynamics simulation code LAMMPS (Ref a.). The code evaluates the total energy and atomic forces (energy gradient) according to cubic spine-based variant (Ref b.) of the Modified Embedded Atom Method (MEAM).

  12. Measurement of tool forces in diamond turning

    SciTech Connect (OSTI)

    Drescher, J.; Dow, T.A.

    1988-12-01

    A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

  13. Macroscopic model of scanning force microscope

    DOE Patents [OSTI]

    Guerra-Vela, Claudio; Zypman, Fredy R.

    2004-10-05

    A macroscopic version of the Scanning Force Microscope is described. It consists of a cantilever under the influence of external forces, which mimic the tip-sample interactions. The use of this piece of equipment is threefold. First, it serves as direct way to understand the parts and functions of the Scanning Force Microscope, and thus it is effectively used as an instructional tool. Second, due to its large size, it allows for simple measurements of applied forces and parameters that define the state of motion of the system. This information, in turn, serves to compare the interaction forces with the reconstructed ones, which cannot be done directly with the standard microscopic set up. Third, it provides a kinematics method to non-destructively measure elastic constants of materials, such as Young's and shear modules, with special application for brittle materials.

  14. Sensing Current and Forces with SPM

    SciTech Connect (OSTI)

    Park, Jeong Y.; Maier, Sabine; Hendriksen, Bas; Salmeron, Miquel

    2010-07-02

    Atomic force microscopy (AFM) and scanning tunneling microscopy (STM) are well established techniques to image surfaces and to probe material properties at the atomic and molecular scale. In this review, we show hybrid combinations of AFM and STM that bring together the best of two worlds: the simultaneous detection of atomic scale forces and conduction properties. We illustrate with several examples how the detection of forces during STM and the detection of currents during AFM can give valuable additional information of the nanoscale material properties.

  15. Hill Air Force Base | Department of Energy

    Office of Environmental Management (EM)

    Hill Air Force Base Hill Air Force Base October 7, 2013 - 2:00pm Addthis Overview Energy savings performance contracting at Hill Air Force Base generated much interest during a recent training session on energy management that downlinked 12 Department of Defense sites. Energy systems in 940 buildings on the Base will be upgraded under an 18-year ESPC between the Government and the energy service company, CES/Way. Improvements are distributed over five task orders that will be completed in five

  16. Force 9 Energy | Open Energy Information

    Open Energy Info (EERE)

    9 Energy Jump to: navigation, search Name: Force 9 Energy Place: Amersham, United Kingdom Zip: HP7 0UT Sector: Wind energy Product: Joint owner of Abercairny windfarm development....

  17. Clinch River MRS Task Force Recommendations

    Broader source: Energy.gov [DOE]

    The Clinch River HRS Task Force was appointed in July 1985 by the Roane County Executive and the Oak Ridge City Council to evaluate the Monitored Retrievable Storage (MRS) facility proposed by the...

  18. SCM Forcing Data Derived from NWP Analyses

    SciTech Connect (OSTI)

    Jakob, Christian

    2008-01-15

    Forcing data, suitable for use with single column models (SCMs) and cloud resolving models (CRMs), have been derived from NWP analyses for the ARM (Atmospheric Radiation Measurement) Tropical Western Pacific (TWP) sites of Manus Island and Nauru.

  19. Micromechanical apparatus for measurement of forces

    DOE Patents [OSTI]

    Tanner, Danelle Mary; Allen, James Joe

    2004-05-25

    A new class of micromechanical dynamometers has been disclosed which are particularly suited to fabrication in parallel with other microelectromechanical apparatus. Forces in the microNewton regime and below can be measured with such dynamometers which are based on a high-compliance deflection element (e.g. a ring or annulus) suspended above a substrate for deflection by an applied force, and one or more distance scales for optically measuring the deflection.

  20. DOE Contractor Work Force Restructuring Approval Thresholds

    Energy Savers [EERE]

    Contractor Work Force Restructuring Approval Thresholds Up to 100 employees Contractor can make decision bit must notify DOE of intent of restructuring 101-200 employees DOE/NNSA field office is authorized to provide approval 201-500 employees LM is authorized to provide approval and NNSA Administrator is authorized to provide approval for NNSA work force restructurings in consultation with LM 501 and above employees Under Secretary/NNSA Administrator approval required

  1. ESPC Success Story - Dyess Air Force Base

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DYESS AIR FORCE BASE DYESS, TEXAS Water Conservation and Green Energy ESPC SUCCESS STORY Dyess Air Force Base and surrounding west Texas has been under extreme-drought water restrictions for years. To ease the stress on the nearby city of Abilene's potable water supply, Dyess began using the city's effluent water for irrigation. They arranged to use existing oil pipelines to economically transport the water 7 miles from the city to the base. Dyess also entered into an energy savings performance

  2. September 2012, Work Force Retention Work Group Status Overview

    Energy Savers [EERE]

    Work Force Retention Work Group Status Overview 2 Subgroups: Pro-Force and Non-Pro-Force Pro-Force Subgroup: Accomplishments: 1. Completion of 10 CFR 1046 [Protective Force Personnel Medical, Physical Readiness, Training, and Access Authorization Standards] as a final rule that includes modification efforts to address barriers to workforce retention. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce

  3. Building Bridges: Federal Agencies Join Forces to Promote Sustainable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Bridges: Federal Agencies Join Forces to Promote Sustainable, Resilient Tribal Communities Building Bridges: Federal Agencies Join Forces to Promote Sustainable, Resilient ...

  4. Climate Change Task Force Webinar Series | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    State, Local, and Tribal Leaders Task Force on Climate Preparedness and Resilience. ... Task Force on Climate Preparedness and Resilience, established by an Executive Order in ...

  5. Before Senate Subcommittee on Strategic Forces - Committee on...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Strategic Forces - Committee on Armed Services Before Senate Subcommittee on Strategic Forces - Committee on Armed Services By: David Huizenga, Senior Advisor for...

  6. Nuclear Forces and High-Performance Computing: The Perfect Match...

    Office of Scientific and Technical Information (OSTI)

    Conference: Nuclear Forces and High-Performance Computing: The Perfect Match Citation Details In-Document Search Title: Nuclear Forces and High-Performance Computing: The Perfect...

  7. Government and Industry A Force for Collaboration at the Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop ...

  8. Implementation Plan, 29 Recommendations of the Protective Force...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation Plan, 29 Recommendations of the Protective Force Career Options Study Group - January 2011 Implementation Plan, 29 Recommendations of the Protective Force Career...

  9. Clean Air Task Force CATF | Open Energy Information

    Open Energy Info (EERE)

    Force (CATF) Place: Boston, Massachusetts Zip: 2108 Product: Massachusetts-based scientific research and legal advocacy center. References: Clean Air Task Force (CATF)1 This...

  10. Protective Force Protocols for ESS Supported Performance Tests...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, 2007 Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12,...

  11. Hickam Air Force Base Fuel Cell Vehicles: Early Implementation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hickam Air Force Base Fuel Cell Vehicles: Early Implementation Experience Hickam Air Force Base Fuel Cell Vehicles: Early Implementation Experience This report sumarizes early...

  12. Coating thickness and coverage effects on the forces between...

    Office of Scientific and Technical Information (OSTI)

    forces between silica nanoparticles in water. Citation Details In-Document Search Title: Coating thickness and coverage effects on the forces between silica nanoparticles in water. ...

  13. Casimir Forces On A Silicon Micromechanical Chip (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Casimir Forces On A Silicon Micromechanical Chip Citation Details In-Document Search Title: Casimir Forces On A Silicon Micromechanical Chip Quantum fluctuations ...

  14. Before the Subcommittee on Strategic Forces - House Armed Services...

    Office of Environmental Management (EM)

    the Subcommittee on Strategic Forces - House Armed Services Committee Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the Subcommittee on Strategic Forces -...

  15. Before the Subcommittee on Strategic Forces - House Committee...

    Energy Savers [EERE]

    the Subcommittee on Strategic Forces - House Committee on Armed Services Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the Subcommittee on Strategic Forces -...

  16. Spray bottle apparatus with force multiply pistons

    DOE Patents [OSTI]

    Eschbach, Eugene A. (Richland, WA)

    1992-01-01

    The present invention comprises a spray bottle in which the pressure resulting from the gripping force applied by the user is amplified and this increased pressure used in generating a spray such as an aerosol or fluid stream. In its preferred embodiment, the invention includes a high pressure chamber and a corresponding piston which is operative for driving fluid out of this chamber at high pressure through a spray nozzle and a low pressure chamber and corresponding piston which is acted upon by the hydraulic pressure within the bottle resulting from the gripping force. The low pressure chamber and piston are of larger size than the high pressure chamber and piston. The pistons are rigidly connected so that the force created by the pressure acting on the piston in the low pressure chamber is transmitted to the piston in the high pressure chamber where it is applied over a more limited area thereby generating greater hydraulic pressure for use in forming the spray.

  17. Electrodynamic force of dielectric barrier discharge

    SciTech Connect (OSTI)

    Shang, J. S.; Roveda, F.; Huang, P. G.

    2011-06-01

    The periodic electrostatic force of dielectric barrier discharge (DBD) in nitrogen for flow control is investigated by a system of physics-based, two-dimensional model equations. The plasma generation process of DBD is mainly the avalanche growth of electrons through the secondary emission from cathode. Therefore, the charged particle motion of a succession of random micro discharges can be approximated by the drift-diffusion model. The force of DBD generated by charge separation and accumulation over the dielectrics is obtained by solving the model equations with the rigorous media interface boundary condition of Maxwell equations in the time domain. The discharge structure and force components by different electrical permittivity and amplitudes of externally applied electrical potential are delineated and quantified.

  18. Fidelity imaging for atomic force microscopy

    SciTech Connect (OSTI)

    Ghosal, Sayan Salapaka, Murti

    2015-01-05

    Atomic force microscopy is widely employed for imaging material at the nanoscale. However, real-time measures on image reliability are lacking in contemporary atomic force microscopy literature. In this article, we present a real-time technique that provides an image of fidelity for a high bandwidth dynamic mode imaging scheme. The fidelity images define channels that allow the user to have additional authority over the choice of decision threshold that facilitates where the emphasis is desired, on discovering most true features on the sample with the possible detection of high number of false features, or emphasizing minimizing instances of false detections. Simulation and experimental results demonstrate the effectiveness of fidelity imaging.

  19. Protective Force Contingency Planning Technical Standard

    Energy Savers [EERE]

    DOE STANDARD PROTECTIVE FORCE CONTINGENCY PLANNING TECHNICAL STANDARD U.S. Department of Energy Washington, D.C. 20585 DOE-STD-1213-2014 JULY 2014 ──────────────── CHANGE NOTICE NO.1 SEPTEMBER 2015 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This page intentionally left blank. DOE-STD-1213-2014 i ATTACHMENT 1 Change Notice No. 1 DOE-STD-1213-2014 September 2015 Protective Force Contingency Planning

  20. Natural Gas Weekly Update, Printer-Friendly Version

    Gasoline and Diesel Fuel Update (EIA)

    On November 6, the El Paso Natural Gas Company announced a force majeure because of turbine mechanical failure at the Alamo Lake number 2 station. The station is located in La...

  1. EIA - Daily Report 9/27/05 - Hurricane Impacts on U.S. Oil &...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Henry Hub, is continuing its Force Majeure until further notice. As a result, the New York Mercantile Exchange (NYMEX), where futures contracts are traded for delivery to the Henry ...

  2. EIA - Daily Report 10/6/05 - Hurricane Impacts on U.S. Oil &...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Sabine Pipeline, operator of the Henry Hub, has lifted its force majeure for gas flows at ... There are 14 pipelines with interconnections at the Henry Hub. As a result of these ...

  3. GeoVision Study Task Forces

    Broader source: Energy.gov [DOE]

    GeoVision, an Energy Department initiative, is undertaking a rigorous study that will culminate in growth scenarios for the geothermal energy sector over the next three decades. Seven current task forces assigned by the Visionary Team comprise the scope of the study.

  4. Direct Lorentz force compensation flowmeter for electrolytes

    SciTech Connect (OSTI)

    Vasilyan, S. Froehlich, Th.

    2014-12-01

    A simplified method of contactless Lorentz force (LF) measurements for flow meters on electrolytes is described and realized. Modification and comparative representation are discussed against recently well-developed methods. Based on the catapult effect, that current carrying conductor experiences a repulsive force in a magnetic field, we demonstrate force measurement method of LF velocimetry applications by commonly known electromagnetic force compensation principle. Measurement approach through zero point stability is considered to minimize mechanical influences and avoid gravimetric uncertainties. Here, the current carrying wires are static fixed in the vicinity of magnet system at zero point stable position, while occurring deflection of magnets by electrolyte flow is compensated by external applied current within wires. Measurements performed by developed servo-system which drives control loop by means of optical position sensor for simplified (i) single wire and (ii) coil-like extended compensation schemes. Guided by experiments on electrolyte flow, we demonstrate the applicability of adopted principle for conductivities ranging from 2 to 20?S/m. Further improvements are discussed in agreement with the parameters of demonstration setup, straightforward theory, and experimental results. We argue that this method is potentially suitable for: (a) applications with higher conductivity like molten metal (order of 10{sup 6?}S/m) assuming spatial configuration of setup and (b) for lower range of conductivity (below 1?S/m) while this is strongly subject to stiffness of system and noise mainly mechanical and thermal radiations.

  5. Protective Force Contingency Planning Technical Standard

    Energy Savers [EERE]

    NOT MEASUREMENT SENSITIVE DOE-STD-1213-2014 July 2014 DOE HANDBOOK PROTECTIVE FORCE CONTINGENCY PLANNING TECHNICAL STANDARD U.S. Department of Energy Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This page intentionally left blank. DOE-STD-1213-2014 i CONTENTS FOREWORD .............................................................................................................................v 1. INTRODUCTION

  6. NEW - DOE O 333.1, Administering Work Force Discipline

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    The order provides requirements and responsibilities for administering work force discipline and corrective actions.

  7. Miscellaneous EPA Submittals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EPA Individual Permit: Miscellaneous EPA Submittals An abundance of Individual Permit documents, from implementation to reporting, is available to the public. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Force Majeure SMA Site Submittal Date Document October 30, 2015 NPDES Permit No. NM0030759-Request for an Extension Based on Force Majeure under Part I.E.4(c) for Eighteen Sites within Ten Site Monitoring Areas

  8. Work Force Retention Work Group Charter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Force Retention Work Group Charter Work Force Retention Work Group Charter The Work force Retention Work Group is established to support the Department's critical focus on maintaining a high-performing work force at a time when a significant number of the workers needed to support DOE's national security mission are reaching retirement age. PDF icon Work Force Retention Work Group Charter More Documents & Publications Workforce Retention Work Group Status Overview - September 2012 Training

  9. Interagency Energy Management Task Force Members | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Interagency Energy Management Task Force Members Interagency Energy Management Task Force Members The Interagency Energy Management Task Force is led by the Federal Energy Management Program director. Members include energy and sustainability managers from federal agencies. Task Force Executive Director Dr. Timothy Unruh U.S. Department of Energy 202-586-5772 Task Force Members Organization Primary Contact Alternate Contact General Services Administration Mark Ewing Karren Curran National

  10. Federal Smart Grid Task Force | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Smart Grid Task Force Federal Smart Grid Task Force Task Force Background The Federal Smart Grid Task Force was established under Title XIII of the Energy Independence and Security Act of 2007 (EISA) and includes experts from eleven Federal agencies. The Department of Energy is represented by the Office of Electricity Delivery and Energy Reliability which is the Task Force lead, as well as the Office of Energy Efficiency and Renewable Energy and the National Energy Technology Laboratory.

  11. Friction forces on atoms after acceleration

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Intravaia, Francesco; Mkrtchian, Vanik E.; Buhmann, Stefan Yoshi; Scheel, Stefan; Dalvit, Diego A. R.; Henkel, Carsten

    2015-05-12

    The aim of this study is to revisit the calculation of atom–surface quantum friction in the quantum field theory formulation put forward by Barton (2010 New J. Phys. 12 113045). We show that the power dissipated into field excitations and the associated friction force depend on how the atom is boosted from being initially at rest to a configuration in which it is moving at constant velocity (v) parallel to the planar interface. In addition, we point out that there is a subtle cancellation between the one-photon and part of the two-photon dissipating power, resulting in a leading order contributionmore » to the frictional power which goes as v4. These results are also confirmed by an alternative calculation of the average radiation force, which scales as v3.« less

  12. Atomically resolved force microscopy at room temperature

    SciTech Connect (OSTI)

    Morita, Seizo

    2014-04-24

    Atomic force microscopy (AFM) can now not only image individual atoms but also construct atom letters using atom manipulation method even at room temperature (RT). Therefore, the AFM is the second generation atomic tool following the scanning tunneling microscopy (STM). However the AFM can image even insulating atoms, and also directly measure/map the atomic force and potential at the atomic scale. Noting these advantages, we have been developing a bottom-up nanostructuring system at RT based on the AFM. It can identify chemical species of individual atoms and then manipulate selected atom species to the predesigned site one-by-one to assemble complex nanostructures consisted of multi atom species at RT. Here we introduce our results toward atom-by-atom assembly of composite nanostructures based on the AFM at RT including the latest result on atom gating of nano-space for atom-by-atom creation of atom clusters at RT for semiconductor surfaces.

  13. U.S. Air Force (USAF) Air Force Research Laboratory (AFRL)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mr. Benjamin Leever U.S. Air Force (USAF) Air Force Research Laboratory (AFRL) DOE - DoD Multi-topic Workshop Fort Worth, TX R2R Breakout Session October 8, 2014 * Click to edit Master text styles - Second level * Third level - Fourth level » Fifth level * Solicit input from industry to guide focus areas and scope for future IMI - Six potential topics identified. BAAs for two IMI expected to be released Nov. 2014 and January 2015. - Information requested includes existing manufacturing

  14. Departmental Response: SEAB Task Force Recommendations on

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Departmental Response: SEAB Task Force Recommendations on Technology Development for Environmental Management Introduction In May 2014, Energy Secretary Ernest Moniz charged the Secretary of Energy Advisory Board (SEAB) to provide advice as to how the United States (U.S.) Department of Energy (DOE) could more effectively ensure the development of technology necessary for the Office of Environmental Management (EM) to complete its mission, cleanup of legacy waste sites. The SEAB formed a Task

  15. Protective Forces | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Protective Forces | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets Newsletters Press Releases Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA

  16. air force | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    air force | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets Newsletters Press Releases Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog

  17. protective forces | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    protective forces | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets Newsletters Press Releases Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA

  18. armed forces | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    armed forces | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets Newsletters Press Releases Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA Blog

  19. Squeeze bottle apparatus with force multiplying pistons

    DOE Patents [OSTI]

    Moss, Owen R. (Cary, NC); Gordon, Norman R. (Kennewick, WA); DeFord, Henry S. (Kennewick, WA); Eschbach, Eugene A. (Richland, WA)

    1994-01-01

    The present invention comprises a spray bottle in which the pressure resulting from the gripping force applied by the user is amplified and this increased pressure used in generating a spray such as an aerosol or fluid stream. In its preferred embodiment, the invention includes a high pressure chamber and a corresponding piston which is operative for driving fluid out of this chamber at high pressure through a spray nozzle and a low pressure chamber, and a corresponding piston which is acted upon by the hydraulic pressure within the bottle resulting from the gripping force. The low pressure chamber and piston are of larger size than the high pressure chamber and piston. The pistons are rigidly connected so that the force created by the pressure acting on the piston in the low pressure chamber is transmitted to the piston in the high pressure chamber where it is applied over a more limited area, thereby generating greater hydraulic pressure for use in forming the spray.

  20. Environmental security: Concepts and air force implementation

    SciTech Connect (OSTI)

    Walewski, J.A.

    1995-12-01

    With the end of the Cold War the Department of Defense (DoD) has been reorganized to establish the position of Deputy Under Secretary of Defense for Environmental Security. As a result, the definition of national security has been broadened to include the environment. Environment and protection of the interrelated resources are seen as vital components to the health and welfare of the United States. National security is dependent on environmental security. This paper introduces the role of environmental security as a component of current national security strategy; reviews DoD and the military services role in the domestic legacy of environmental impacts created by the cold war; details the status of current programs and methodologies used to improve environmental performance, compliance with environmental laws, and stewardship activities. Implementation will be demonstrated using Air Force policy, programs and activities underway, and a detailed explanation of Air Force environmental goals and objectives will be highlighted. Lessons learned to date will be covered in addition to future alternative strategies. Military readiness however does not preclude environmental stewardship. Many military lands have become virtual sanctuaries since years of restricted access and activity created islands of diverse ecosystems. Recent survey and inventory work on DoD lands have found some of the most pristine tracts remaining in the country. Consolidation of mission activities through base closure an realignment, and increasing weapon system sophistication, adds additional challenges to comply with environmental laws and regulation. This paper will define these unique environmental challenges, and discuss the methodologies used by the Air Force to fulfill its environmental stewardship role.

  1. Color force saturation in nuclear chromodynamics

    SciTech Connect (OSTI)

    Sivers, D.

    1985-01-01

    A simple representation of the Q anti QQ anti Q Green's Function in the strong coupling quenched approximation to lattice QCD is used to illustrate the nature of color force saturation in chromodynamics. The example shows that configuration mixing allows a binding energy of a few MeV in a Q anti QQ anti Q ''molecule'' formed from mesons with mass 1 GeV. In lattice QCD, configuration mixing can be calculated on the same footing with glueball exchange effects by measuring the appropriate operators in a Monte Carlo simulation. 3 refs., 5 figs.

  2. [Band electronic structures and crystal packing forces

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    We investigated the electronic and structural properties of low-dimensional materials and explored the structure-property correlations governing their physical properties. Progress was made on how to interpret the scanning tunneling microscopy and atomic force microscopy images of layered materials and on how to account for charge density wave instabilities in 2-D metals. Materials studied included transition metal chalcogenides, transition metal halides, organic conducting salts, Mo bronzes, A[sub 2]PdH[sub 2], fullerenes, squarate tetrahydrate polymers Fe, Cu(C[sub 4]O[sub 4])4[center dot]H[sub 2]O, BEDT salts, etc.

  3. Coke cake behavior under compressive forces

    SciTech Connect (OSTI)

    Watakabe, S.; Takeda, T.; Itaya, H.; Suginobe, H.

    1997-12-31

    The deformation of the coke cake and load on the side wall during pushing were studied using an electric furnace equipped with a movable wall. Coke cake was found to deform in three stages under compressive forces. The coke cake was shortened in the pushing direction in the cake deformation stage, and load was generated on the side walls in the high wall load stage. Secondary cracks in the coke cake were found to prevent load transmission on the wall. The maximum load transmission rate was controlled by adjusting the maximum fluidity and mean reflectance of the blended coal.

  4. David J. Gross and the Strong Force

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    David J. Gross and the Strong Force Resources with Additional Information The 2004 Nobel Prize in Physics was awarded to David Gross for "the discovery of asymptotic freedom in the theory of the strong interaction". 'Gross, who obtained his PhD in physics in 1966, currently is a professor of physics and director of the Kavli Institute for Theoretical Physics at UC Santa Barbara. ... David Gross Courtesy of UC Santa Barbara [When on the faculty at Princeton University,] he and

  5. Development of Integrated ASR Model Forcing Data and Their Application...

    Office of Scientific and Technical Information (OSTI)

    algorithm of ARM model forcing data, and (2) used the ARM forcing data to identify systematic biases in clouds and radiation in the CAM5 and design new physical ...

  6. Gregory H. Friedman: Before the Subcommittee on Strategic Forces...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategic Forces Committee on Armed Services U.S. House of Representatives Gregory H. Friedman: Before the Subcommittee on Strategic Forces Committee on Armed Services U.S. House ...

  7. Government and Industry a Force for Collaboration at the Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Force for Collaboration at the Energy Roadmap Update Workshop Sept. 16, 2009 Energy ... forces at a workshop to help update the Roadmap to Secure Control Systems in the Energy ...

  8. Comprehensive Energy Program at Patrick Air Force Base Set to...

    Office of Environmental Management (EM)

    at Patrick Air Force Base Set to Exceed Energy Goals Federal Energy Management Program case study focuses on Patrick Air Force Base's use of a utility energy services contract...

  9. Laser interferometry force-feedback sensor for an interfacial force microscope

    DOE Patents [OSTI]

    Houston, Jack E.; Smith, William L.

    2004-04-13

    A scanning force microscope is provided with a force-feedback sensor to increase sensitivity and stability in determining interfacial forces between a probe and a sample. The sensor utilizes an interferometry technique that uses a collimated light beam directed onto a deflecting member, comprising a common plate suspended above capacitor electrodes situated on a substrate forming an interference cavity with a probe on the side of the common plate opposite the side suspended above capacitor electrodes. The probe interacts with the surface of the sample and the intensity of the reflected beam is measured and used to determine the change in displacement of the probe to the sample and to control the probe distance relative to the surface of the sample.

  10. ARM - Midlatitude Continental Convective Clouds - Single Column Model Forcing (xie-scm_forcing)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Xie, Shaocheng; McCoy, Renata; Zhang, Yunyan

    2012-10-25

    The constrained variational objective analysis approach described in Zhang and Lin [1997] and Zhang et al. [2001]was used to derive the large-scale single-column/cloud resolving model forcing and evaluation data set from the observational data collected during Midlatitude Continental Convective Clouds Experiment (MC3E), which was conducted during April to June 2011 near the ARM Southern Great Plains (SGP) site. The analysis data cover the period from 00Z 22 April - 21Z 6 June 2011. The forcing data represent an average over the 3 different analysis domains centered at central facility with a diameter of 300 km (standard SGP forcing domain size), 150 km and 75 km, as shown in Figure 1. This is to support modeling studies on various-scale convective systems.

  11. Report of the Hubs+ Task Force | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hubs+ Task Force Report of the Hubs+ Task Force This report presents the findings and recommendations for the Secretary of Energy Advisory Board (SEAB) Task Force to Support Evaluation of the new Funding Constructs for Energy Research and Development (R&D) in the Department of Energy. The Task Force was charged with assisting the DOE in evaluating the management and early progress of these new management and funding mechanisms in the Department. PDF icon SEAB Hubs+ Report PDF icon Hubs+

  12. Design of the IPIRG-2 simulated seismic forcing function

    SciTech Connect (OSTI)

    Olson, R.; Scott, P.; Wilkowski, G.

    1996-02-01

    A series of pipe system experiments was conducted in IPIRG-2 that used a realistic seismic forcing function. Because the seismic forcing function was more complex than the single-frequency increasing-amplitude sinusoidal forcing function used in the IPIRG-1 pipe system experiments, considerable effort went into designing the function. This report documents the design process for the seismic forcing function used in the IPIRG-2 pipe system experiments.

  13. Draft Report of the Task Force on Methane Hydrates

    Broader source: Energy.gov [DOE]

    This report presents the findings and recommendations for the Secretary of Energy Advisory Board (SEAB) Task Force on Methane Hydrates.

  14. Collective behaviors of the Casimir force in microelectromechanical systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Technical Report) | SciTech Connect Collective behaviors of the Casimir force in microelectromechanical systems Citation Details In-Document Search Title: Collective behaviors of the Casimir force in microelectromechanical systems Our goal was to explore the strong dependence of the Casimir force on the shape of the interacting bodies. We made significant progress and measured the Casimir force on silicon surface with rectangular corrugation and showed that the results agree with

  15. V.P. Biden Hosts the Middle Class Task Force

    Broader source: Energy.gov [DOE]

    Secretary Chu will join Vice President Biden at the White House as he hosts a Middle Class Task Force event.

  16. Air Force Achieves Fuel Efficiency through Industry Best Practices |

    Energy Savers [EERE]

    Department of Energy Force Achieves Fuel Efficiency through Industry Best Practices Air Force Achieves Fuel Efficiency through Industry Best Practices Fact sheet offers an overview of the U.S. Air Force's fuel-efficiency program. PDF icon af_fuelefficiency.pdf More Documents & Publications U.S. Air Force Energy Program Presentation National Clean Fleets Partnership Fact Sheet and Progress Update Report of the DOE-DOE Workshop on Fuel Cells in Aviation: Workshop Summary and Action Plan

  17. Before the House Armed Services Subcommittee on Strategic Forces |

    Energy Savers [EERE]

    Department of Energy Subcommittee on Strategic Forces Before the House Armed Services Subcommittee on Strategic Forces Before the House Armed Services Subcommittee on Strategic Forces By: Ines Tray, Assistant Secretary Office of Environmental Management Subject: EM FY 2011 Budget Request PDF icon 3-25-10_Final_Testimony_(Triay).pdf More Documents & Publications Assistant Secretray Triay's Written Statement before Senate Armed Services Subcommittee on Strategic Forces (April 21, 2010)

  18. Before the Subcommittee on Strategic Forces - House Armed Services

    Energy Savers [EERE]

    Committee | Department of Energy - House Armed Services Committee Before the Subcommittee on Strategic Forces - House Armed Services Committee Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the Subcommittee on Strategic Forces - House Armed Services Committee PDF icon 9-13-12_Daniel_Poneman_FT HASC.pdf More Documents & Publications Before the Subcommittee on Strategic Forces - House Committee on Armed Services Before the Subcommittee on Strategic Forces - House Armed

  19. Joining Forces to Empower Veterans | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Joining Forces to Empower Veterans Joining Forces to Empower Veterans November 10, 2015 - 11:20am Addthis Joining Forces to Empower Veterans Sarah Wagoner Sarah Wagoner Communications Specialist, Wind and Water Power Technologies Office Through the Energy Department's partnership with the federal Joining Forces campaign, companies from the energy, manufacturing, transportation, and information technology sectors have committed to hiring approximately 90,000 veterans and military spouses through

  20. SEAB Subcommittees and Task Forces | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About Energy.gov » Leadership » Advisory Board » SEAB Subcommittees and Task Forces SEAB Subcommittees and Task Forces SEAB has four standing subcommittees that provide advice and recommendations to the Secretary on the Department's four major mission areas: science; energy; nuclear security; and environmental stewardship. Ad-hoc task forces, comprised of SEAB members and outside experts, also advise in specific areas directed by the Secretary. Additionally, a standing task force was created

  1. Memorandum, Protective Force Career Options Committee - July 23, 2009 |

    Office of Environmental Management (EM)

    Department of Energy Protective Force Career Options Committee - July 23, 2009 Memorandum, Protective Force Career Options Committee - July 23, 2009 On March 31,2009, this office commissioned a study to examine career opportunities and retirement options for the Department of Energy (DOE) protective force members. On March 3 1,2009, this office commissioned a study to examine career opportunities and retirement options for the Department of Energy (DOE) protective force members. The study

  2. Material fabrication using acoustic radiation forces

    DOE Patents [OSTI]

    Sinha, Naveen N.; Sinha, Dipen N.; Goddard, Gregory Russ

    2015-12-01

    Apparatus and methods for using acoustic radiation forces to order particles suspended in a host liquid are described. The particles may range in size from nanometers to millimeters, and may have any shape. The suspension is placed in an acoustic resonator cavity, and acoustical energy is supplied thereto using acoustic transducers. The resulting pattern may be fixed by using a solidifiable host liquid, forming thereby a solid material. Patterns may be quickly generated; typical times ranging from a few seconds to a few minutes. In a one-dimensional arrangement, parallel layers of particles are formed. With two and three dimensional transducer arrangements, more complex particle configurations are possible since different standing-wave patterns may be generated in the resonator. Fabrication of periodic structures, such as metamaterials, having periods tunable by varying the frequency of the acoustic waves, on surfaces or in bulk volume using acoustic radiation forces, provides great flexibility in the creation of new materials. Periodicities may range from millimeters to sub-micron distances, covering a large portion of the range for optical and acoustical metamaterials.

  3. Northeast High-Level Radioactive Waste Transportation Task Force Agenda |

    Office of Environmental Management (EM)

    Department of Energy Northeast High-Level Radioactive Waste Transportation Task Force Agenda Northeast High-Level Radioactive Waste Transportation Task Force Agenda PDF icon Northeast High-Level Radioactive Waste Transportation Task Force Agenda More Documents & Publications NTSF Spring 2013 Save The Date NTSF 2013 Agenda NTSF Spring 2010 Final Agenda

  4. Authorize_Changes_Contractor_Work_Force_Restructuring_Policy.pdf |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Authorize_Changes_Contractor_Work_Force_Restructuring_Policy.pdf Authorize_Changes_Contractor_Work_Force_Restructuring_Policy.pdf PDF icon Authorize_Changes_Contractor_Work_Force_Restructuring_Policy.pdf More Documents & Publications Workforce Restructuring Policy Draft Policy and Planning Guidance for Community Transition Activities General Workforce Restructuring Plan Template

  5. Before the Subcommittee on Strategic Forces - House Armed Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Committee | Department of Energy Armed Services Committee Before the Subcommittee on Strategic Forces - House Armed Services Committee Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the Subcommittee on Strategic Forces - House Armed Services Committee PDF icon 2-28-13_Daniel_Poneman FT HASC More Documents & Publications Before the Subcommittee on Strategic Forces - House Committee on Armed Services

  6. Information-based physics, influence, and forces

    SciTech Connect (OSTI)

    Walsh, James Lyons; Knuth, Kevin H.

    2015-01-13

    In recent works, Knuth and Bahreyni have demonstrated that the concepts of space and time are emergent in a coarse-grained model of direct particle-particle influence. In addition, Knuth demonstrated that observer-made inferences regarding the free particle, which is defined as a particle that influences others, but is not itself influenced, result in a situation identical to the Feynman checkerboard model of the Dirac equation. This suggests that the same theoretical framework that gives rise to an emergent spacetime is consistent with quantum mechanics. In this paper, we begin to explore the effect of influence on the emergent properties of a particle. This initial study suggests that when a particle is influenced, it is interpreted as accelerating in a manner consistent with special relativity implying that, at least in this situation, influence can be conceived of as a force.

  7. Forcing continuous reconnection in hybrid simulations

    SciTech Connect (OSTI)

    Laitinen, T. V. Janhunen, P.; Jarvinen, R.; Kallio, E.

    2014-07-15

    We have performed hybrid simulations of driven continuous reconnection with open boundary conditions. Reconnection is started by a collision of two subsonic plasma fronts with opposite magnetic fields, without any specified magnetic field configuration as initial condition. Due to continued forced plasma inflow, a current sheet co-located with a dense and hot plasma sheet develops. The translational symmetry of the current sheet is broken by applying a spatial gradient in the inflow speed. We compare runs with and without localized resistivity: reconnection is initiated in both cases, but localized resistivity stabilizes it and enhances its efficiency. The outflow speed reaches about half of Alfvn speed. We quantify the conversion of magnetic energy to kinetic energy of protons and to Joule heating and show that with localized resistivity, kinetic energy of protons is increased on average five-fold in the reconnection in our simulation case.

  8. Total aerosol effect: forcing or radiative flux perturbation?

    SciTech Connect (OSTI)

    Lohmann, Ulrike; Storelvmo, Trude; Jones, Andy; Rotstayn, Leon; Menon, Surabi; Quaas, Johannes; Ekman, Annica; Koch, Dorothy; Ruedy, Reto

    2009-09-25

    Uncertainties in aerosol forcings, especially those associated with clouds, contribute to a large extent to uncertainties in the total anthropogenic forcing. The interaction of aerosols with clouds and radiation introduces feedbacks which can affect the rate of rain formation. Traditionally these feedbacks were not included in estimates of total aerosol forcing. Here we argue that they should be included because these feedbacks act quickly compared with the time scale of global warming. We show that for different forcing agents (aerosols and greenhouse gases) the radiative forcings as traditionally defined agree rather well with estimates from a method, here referred to as radiative flux perturbations (RFP), that takes these fast feedbacks and interactions into account. Thus we propose replacing the direct and indirect aerosol forcing in the IPCC forcing chart with RFP estimates. This implies that it is better to evaluate the total anthropogenic aerosol effect as a whole.

  9. Ex._01_-_Declaration.pdf

    Office of Environmental Management (EM)

  10. U.S. - Canada Power System Outage Task Force: Final Report on...

    Office of Environmental Management (EM)

    - Canada Power System Outage Task Force: Final Report on the Implementation of Task Force Recommendations U.S. - Canada Power System Outage Task Force: Final Report on the...

  11. High-speed adaptive contact-mode atomic force microscopy imaging with near-minimum-force

    SciTech Connect (OSTI)

    Ren, Juan; Zou, Qingze

    2014-07-15

    In this paper, an adaptive contact-mode imaging approach is proposed to replace the traditional contact-mode imaging by addressing the major concerns in both the speed and the force exerted to the sample. The speed of the traditional contact-mode imaging is largely limited by the need to maintain precision tracking of the sample topography over the entire imaged sample surface, while large image distortion and excessive probe-sample interaction force occur during high-speed imaging. In this work, first, the image distortion caused by the topography tracking error is accounted for in the topography quantification. Second, the quantified sample topography is utilized in a gradient-based optimization method to adjust the cantilever deflection set-point for each scanline closely around the minimal level needed for maintaining stable probe-sample contact, and a data-driven iterative feedforward control that utilizes a prediction of the next-line topography is integrated to the topography feeedback loop to enhance the sample topography tracking. The proposed approach is demonstrated and evaluated through imaging a calibration sample of square pitches at both high speeds (e.g., scan rate of 75 Hz and 130 Hz) and large sizes (e.g., scan size of 30 ?m and 80??m). The experimental results show that compared to the traditional constant-force contact-mode imaging, the imaging speed can be increased by over 30 folds (with the scanning speed at 13 mm/s), and the probe-sample interaction force can be reduced by more than 15% while maintaining the same image quality.

  12. A process oriented analysis of the ``declaration of German industry on global warming prevention'' and its implications for the role of voluntary approaches in post-Kyoto climate policy

    SciTech Connect (OSTI)

    Ramesohl, S.; Kristof, K.

    1999-07-01

    Challenged by industry's growing claim for higher self-responsibility and more flexibility, energy and climate policy-makers need to define a future role of voluntary approaches (VA) which realizes the benefits but guarantees environmental effectiveness and political efficiency of these initiatives. Taking the 1996 ``Declaration of German industry on global warming prevention (DGWP)'' as an example of an energy related VA, the paper pursues a dual approach for policy analysis in order to evaluate the static performance and the dynamic process features of the DFWP approach. Transferred to a dynamic model of co-evolutionary climate policy-making, the general conclusions of the German case for climate policy are discussed.

  13. Full information acquisition in piezoresponse force microscopy

    SciTech Connect (OSTI)

    Somnath, Suhas; Belianinov, Alex; Jesse, Stephen; Kalinin, Sergei V.

    2015-12-28

    The information flow from the tip-surface junction to the detector electronics during the piezoresponse force microscopy (PFM) imaging is explored using the recently developed general mode (G-mode) detection. Information-theory analysis suggests that G-mode PFM in the non-switching regime, close to the first resonance mode, contains a relatively small (100 - 150) number of components containing significant information. The first two primary components are similar to classical PFM images, suggesting that classical lock-in detection schemes provide high veracity information in this case. At the same time, a number of transient components exhibit contrast associated with surface topography, suggesting pathway to separate the two. The number of significant components increases considerably in the non-linear and switching regimes and approaching to cantilever resonances, precluding the use of classical lock-in detection and necessitating the use of band excitation or G-mode detection schemes. As a result, the future prospects of full information imaging in SPM are discussed.

  14. Full information acquisition in piezoresponse force microscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Somnath, Suhas; Belianinov, Alex; Jesse, Stephen; Kalinin, Sergei V.

    2015-12-28

    The information flow from the tip-surface junction to the detector electronics during the piezoresponse force microscopy (PFM) imaging is explored using the recently developed general mode (G-mode) detection. Information-theory analysis suggests that G-mode PFM in the non-switching regime, close to the first resonance mode, contains a relatively small (100 - 150) number of components containing significant information. The first two primary components are similar to classical PFM images, suggesting that classical lock-in detection schemes provide high veracity information in this case. At the same time, a number of transient components exhibit contrast associated with surface topography, suggesting pathway to separatemore » the two. The number of significant components increases considerably in the non-linear and switching regimes and approaching to cantilever resonances, precluding the use of classical lock-in detection and necessitating the use of band excitation or G-mode detection schemes. As a result, the future prospects of full information imaging in SPM are discussed.« less

  15. Multi-range force sensors utilizing shape memory alloys

    DOE Patents [OSTI]

    Varma, Venugopal K.

    2003-04-15

    The present invention provides a multi-range force sensor comprising a load cell made of a shape memory alloy, a strain sensing system, a temperature modulating system, and a temperature monitoring system. The ability of the force sensor to measure contact forces in multiple ranges is effected by the change in temperature of the shape memory alloy. The heating and cooling system functions to place the shape memory alloy of the load cell in either a low temperature, low strength phase for measuring small contact forces, or a high temperature, high strength phase for measuring large contact forces. Once the load cell is in the desired phase, the strain sensing system is utilized to obtain the applied contact force. The temperature monitoring system is utilized to ensure that the shape memory alloy is in one phase or the other.

  16. Nuclear Forces and High-Performance Computing: The Perfect Match

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Conference: Nuclear Forces and High-Performance Computing: The Perfect Match Citation Details In-Document Search Title: Nuclear Forces and High-Performance Computing: The Perfect Match High-performance computing is now enabling the calculation of certain nuclear interaction parameters directly from Quantum Chromodynamics, the quantum field theory that governs the behavior of quarks and gluons and is ultimately responsible for the nuclear strong force. We

  17. Micromechanical apparatus for measurement of forces (Patent) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Patent: Micromechanical apparatus for measurement of forces Citation Details In-Document Search Title: Micromechanical apparatus for measurement of forces A new class of micromechanical dynamometers has been disclosed which are particularly suited to fabrication in parallel with other microelectromechanical apparatus. Forces in the microNewton regime and below can be measured with such dynamometers which are based on a high-compliance deflection element (e.g. a ring or annulus)

  18. Linkage to Previous International PV Module QA Task Force Workshops:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proposal for Rating System | Department of Energy Linkage to Previous International PV Module QA Task Force Workshops: Proposal for Rating System Linkage to Previous International PV Module QA Task Force Workshops: Proposal for Rating System This PowerPoint presentation, focused on humidity, temperature and voltage testing, was originally presented at the NREL 2013 PV Module Reliability Workshop on Feb. 26-27, 2013 in Denver, CO. It summarizes the efforts of previous QA task forces and

  19. Federal Task Force Sends Recommendations to President on Fostering Clean

    Energy Savers [EERE]

    Coal Technology | Department of Energy Task Force Sends Recommendations to President on Fostering Clean Coal Technology Federal Task Force Sends Recommendations to President on Fostering Clean Coal Technology August 12, 2010 - 12:00am Addthis WASHINGTON - President Obama's Interagency Task Force on Carbon Capture and Storage (CCS), co-chaired by the U.S. Environmental Protection Agency (EPA) and the Department of Energy (DOE), delivered a series of recommendations to the president today on

  20. Collaborative Utility Task Force Partners with DOE to Develop Cyber

    Energy Savers [EERE]

    Security Requirements for Advanced Metering Infrastructure | Department of Energy Collaborative Utility Task Force Partners with DOE to Develop Cyber Security Requirements for Advanced Metering Infrastructure Collaborative Utility Task Force Partners with DOE to Develop Cyber Security Requirements for Advanced Metering Infrastructure The Advanced Metering Infrastructure Security (AMI-SEC) Task Force announces the release of the AMI System Security Requirements, a first-of-its-kind for the

  1. Asset Revitalization Initiative Task Force Issues Its Second Report |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Asset Revitalization Initiative Task Force Issues Its Second Report Asset Revitalization Initiative Task Force Issues Its Second Report July 2, 2015 - 11:21am Addthis What does this project do? Goal 4. Optimize the use of land and assets. The Asset Revitalization Initiative (ARI) Task Force is pleased to announce the release of its second report providing information to the public on historic actions to reuse U.S. Department of Energy (DOE or Department) assets. The

  2. Department of Energy Establishes Asset Revitalization Task Force

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thursday, February 17, 2011 Department of Energy Establishes Asset Revitalization Task Force Washington, D.C. � Secretary of Energy Steven Chu today announced the establishment of a Task Force on Asset Revitalization to facilitate a discussion among the Department of Energy, communities around DOE sites, nonprofits, tribal governments, the private sector and other stakeholders to identify reuse approaches as environmental cleanup efforts reach completion. The task force will explore

  3. Renewable Hydrogen Production at Hickam Air Force Base | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy at Hickam Air Force Base Renewable Hydrogen Production at Hickam Air Force Base Presented at the Renewable Hydrogen Workshop, Nov. 16, 2009, in Palm Springs, CA PDF icon renewable_hydrogen_workshop_nov16_quinn.pdf More Documents & Publications Hickam Air Force Base Fuel Cell Vehicles: Early Implementation Experience Fuel Cell Hybrid Bus Lands at Hickam AFB: Hydrogen Fuel Cell & Infrastructure Technologies Program, Fuel Cell Bus Demonstration Project (Fact Sheet) Hawaii

  4. University Research Reactor Task Force to the Nuclear Energy Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advisory Committee | Department of Energy University Research Reactor Task Force to the Nuclear Energy Research Advisory Committee University Research Reactor Task Force to the Nuclear Energy Research Advisory Committee In mid-February, 2001 The University Research Reactor (URR) Task Force (TF), a sub-group of the Department of Energy (DOE) Nuclear Energy Research Advisory Committee (NERAC), was asked to: * Analyze information collected by DOE, the NERAC "Blue Ribbon Panel,"

  5. Before the House Armed Services Subcommittee on Strategic Forces |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Armed Services Subcommittee on Strategic Forces Before the House Armed Services Subcommittee on Strategic Forces Before the House Armed Services Subcommittee on Strategic Forces By: Glenn Podonsky, Chief Health, Safety and Security Officer Subject: FY 2010 Budget Request PDF icon 5_13_09_HSS_Fin_Testimony.pdf More Documents & Publications USW Health Safety and Environment Conference - HSS Workshop Department of Energy Office of Health, Safety and Security(HSS) Small

  6. Before the Subcommittee on Strategic Forces - House Committee on Armed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services | Department of Energy Committee on Armed Services Before the Subcommittee on Strategic Forces - House Committee on Armed Services Testimony of Daniel B. Poneman, Deputy Secretary of Energy Before the Subcommittee on Strategic Forces - House Committee on Armed Services PDF icon 2-28-13_Daniel_Poneman FT HAS.pdf More Documents & Publications Before the Subcommittee on Strategic Forces - House Armed Services Committee

  7. Task Force on Climate Preparedness and Resilience Announces Tribal Climate

    Energy Savers [EERE]

    Resilience Program | Department of Energy Task Force on Climate Preparedness and Resilience Announces Tribal Climate Resilience Program Task Force on Climate Preparedness and Resilience Announces Tribal Climate Resilience Program July 16, 2014 - 3:38pm Addthis Access Recordings from the Climate Change Impacts and Indian Country Webinar Series On July 16, at the fourth and final meeting of the White House State, Local, and Tribal Leaders Task Force on Climate Preparedness and Resilience, the

  8. Protective Force Protocols for ESS Supported Performance Tests and

    Energy Savers [EERE]

    Exercises, March 12, 2007 | Department of Energy Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, 2007 Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, 2007 March 12, 2008 The DOE/NNSA has an established process for determining the effectiveness of a site's overall protection system, and a vital part of this process is the use of performance testing. This document - Protective Force Protocols for Engagement

  9. Before the Subcommittee on Strategic Forces House Committee on Armed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services | Department of Energy Subcommittee on Strategic Forces House Committee on Armed Services Before the Subcommittee on Strategic Forces House Committee on Armed Services Testimony of Mark Whitney, Acting Assistant Secretary for Environmental Management Before the Subcommittee on Strategic Forces House Committee on Armed Services PDF icon 3.24.15_Mark_Whitney FT HASC.pdf More Documents & Publications Written Statement of Mark Whitney Acting Assistant Secretary for Environmental

  10. Federal Task Force Sends Recommendations to President on Fostering Clean

    Office of Environmental Management (EM)

    Coal Technology | Department of Energy Federal Task Force Sends Recommendations to President on Fostering Clean Coal Technology Federal Task Force Sends Recommendations to President on Fostering Clean Coal Technology August 12, 2010 - 1:00pm Addthis Washington, DC - President Obama's Interagency Task Force on Carbon Capture and Storage (CCS), co-chaired by the U.S. Environmental Protection Agency (EPA) and the Department of Energy (DOE), delivered a series of recommendations to the president

  11. Report of the Task Force on Technology Development for Environmental

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management | Department of Energy Technology Development for Environmental Management Report of the Task Force on Technology Development for Environmental Management This report presents the findings and recommendations for the Secretary of Energy Advisory Board (SEAB) Task Force on Technology Development for Environmental Management. The Task Force was charged with assessing the value of a renewed EM science and technology development effort and how such a program would be structured. PDF

  12. Gregory H. Friedman: Before the Subcommittee on Strategic Forces Committee

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Armed Services U.S. House of Representatives | Department of Energy Strategic Forces Committee on Armed Services U.S. House of Representatives Gregory H. Friedman: Before the Subcommittee on Strategic Forces Committee on Armed Services U.S. House of Representatives February 28, 2013 Before the Subcommittee on Strategic Forces Committee on Armed Services U.S. House of Representatives Statement of Gregory H. Friedman, Inspector General, Department of Energy Mr. Chairman and Members of the

  13. Interim Report of the Task Force on Nuclear Nonproliferation | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Nuclear Nonproliferation Interim Report of the Task Force on Nuclear Nonproliferation The SEAB Task Force on Nuclear Nonproliferation (TFNN) was established by the Secretary of Energy on December 20, 2014 to advise the Department of Energy (DOE) on future areas of emphasis for its nuclear nonproliferation activities. This interim report of the Task Force sets forth its findings and recommendations to date in five timely and important areas: (I) Setting Objectives and Priorities for

  14. Microsoft Word - Energy Code Enforcement Funding Task Force - Fact Sheet

    Office of Environmental Management (EM)

    [Final].docx | Department of Energy Energy Code Enforcement Funding Task Force - Fact Sheet [Final].docx Microsoft Word - Energy Code Enforcement Funding Task Force - Fact Sheet [Final].docx PDF icon Microsoft Word - Energy Code Enforcement Funding Task Force - Fact Sheet [Final].docx More Documents & Publications Sonoma County Solar Implementation Plan Energy Industry Days Additional Information Microsoft Word - T4_VEIC_TO2_ Sub3_Residential Retrofit Program Design Guide Play Book_TEAM

  15. Department of Energy Establishes Asset Revitalization Task Force |

    Office of Environmental Management (EM)

    Department of Energy Establishes Asset Revitalization Task Force Department of Energy Establishes Asset Revitalization Task Force February 17, 2011 - 12:00pm Addthis Media Contact (202) 586-4940 Washington, D.C. - Secretary of Energy Steven Chu today announced the establishment of a Task Force on Asset Revitalization to facilitate a discussion among the Department of Energy, communities around DOE sites, nonprofits, tribal governments, the private sector and other stakeholders to identify

  16. Report of the Task Force on Statewide Transmission Siting and...

    Open Energy Info (EERE)

    the Task Force on Statewide Transmission Siting and Permitting (Colorado). NA: Colorado Public Utilities Commission. Retrieved from "http:en.openei.orgwindex.php?titleReport...

  17. Phase contrast and operation regimes in multifrequency atomic force microscopy

    SciTech Connect (OSTI)

    Santos, Sergio

    2014-04-07

    In amplitude modulation atomic force microscopy the attractive and the repulsive force regimes induce phase shifts above and below 90°, respectively. In the more recent multifrequency approach, however, multiple operation regimes have been reported and the theory should be revisited. Here, a theory of phase contrast in multifrequency atomic force microscopy is developed and discussed in terms of energy transfer between modes, energy dissipation and the kinetic energy and energy transfer associated with externally driven harmonics. The single frequency virial that controls the phase shift might undergo transitions in sign while the average force (modal virial) remains positive (negative)

  18. Transmission Services WIST Task Force Dynamic Transfer Capability...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ("WIST"), a Task Force of technical staff primarily from Northwest and California transmission providers and sub-regional entities, completed a report documenting Phase 1 of its...

  19. Before the Subcommittee on Strategic Forces House Committee on...

    Energy Savers [EERE]

    on Armed Services Testimony of Mark Whitney, Acting Assistant Secretary for Environmental Management Before the Subcommittee on Strategic Forces House Committee on Armed Services...

  20. Before the Subcommittee on Strategic Forces - House Armed Services...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Written Statement by David Huizenga, Senior Advisor for Environmental Management For the Subcommittee on Strategic Forces - House Armed Services Committee PDF icon 5-9-13David...

  1. Air Force Announces Funding for Alternative Energy Research & Development

    Broader source: Energy.gov [DOE]

    The Air Force Research Laboratory (AFRL) has released a Broad Area Announcement (BAA) for over $25 million for Alternative Energy Research & Development.

  2. A Nanocrystal Sensor for Luminescence Detection of Cellular Forces...

    Office of Scientific and Technical Information (OSTI)

    States Language: English Subject: 77 NANOSCIENCE AND NANOTECHNOLOGY; 47 OTHER INSTRUMENTATION tetrapod stress gauge, luminescent nanocrystals, cellular forces Word Cloud More...

  3. Hickam Air Force Base Fuel Cell Vehicles: Early Implementation Experience

    Broader source: Energy.gov [DOE]

    This report sumarizes early implementation experience from an evaluation of two prototype fuel cell vehicles operating at Hickam Air Force Base in Honolulu, Hawaii.

  4. An ensemble constrained variational analysis of atmospheric forcing...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: An ensemble constrained variational analysis of atmospheric forcing data and its application to evaluate clouds in CAM5: Ensemble 3DCVA and Its Application ...

  5. Temperature evolution of electromotive force from Pt on yttrium...

    Office of Scientific and Technical Information (OSTI)

    Temperature evolution of electromotive force from Pt on yttrium-iron-garnet under ferromagnetic resonance Citation Details In-Document Search Title: Temperature evolution of ...

  6. Air Force Civil Engineer Support Agency | Open Energy Information

    Open Energy Info (EERE)

    Civil Engineer Support Agency Jump to: navigation, search Name: Air Force Civil Engineer Support Agency Place: Florida Zip: 32403-5319 Sector: Renewable Energy Product:...

  7. Modelled Black Carbon Radiative Forcing and Atmospheric Lifetime...

    Office of Scientific and Technical Information (OSTI)

    from four recent aircraft measurement campaigns with 13 state of the art aerosol models, and show that recent assessments may have overestimated present day BC radiative forcing. ...

  8. Appendix 3. Task Force Meeting Agendas and Materials Reviewed by

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3. Task Force Meeting Agendas and Materials Reviewed by the Hubs+ Task Force December 3-4 Task Force Meeting Agenda Hubs+ Task Force Meeting Agenda December 3-4, 2013 Lawrence Livermore National Laboratory HPCIC, Yosemite Room 7000 East Avenue Livermore, CA Tuesday, December 3 4:00-4:15 PM Introductions and Overview of Agenda Cherry Murray, TF Chair 4:15-5:30 PM Hubs Management Council Paper Presentation Pat Dehmer, Acting Director of Science *Pete Lyons, Assistant Secretary for Nuclear Energy

  9. Before the Senate Armed Services Subcommittee on Strategic Forces

    Broader source: Energy.gov [DOE]

    Subject: DOE Protective Forces' Personnel System Issues By: Glenn Podonsky, Chief Health, Safety and Security Officer Office of Health, Safety and Security

  10. Before the Senate Subcommittee on Strategic Forces - Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Senate Subcommittee on Strategic Forces - Committee on Armed Services Testimony of James Ownedoff, Acting Principal Deputy Assistant Secretary for Environmental Management...

  11. Before the Subcommittee on Strategic Forces - House Armed Services...

    Office of Environmental Management (EM)

    Before the Subcommittee on Strategic Forces - House Armed Services Committee Before the Subcommittee on Oversight and Investigations - House Committee on Energy and Commerce...

  12. Sandia Energy - New Mexico Renewable Energy Storage Task Force

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewable Energy Storage Task Force Home Infrastructure Security Renewable Energy Energy Partnership News News & Events Energy Storage Systems Energy Storage New Mexico Renewable...

  13. Hydropower Vision Task Force Charter | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Hydropower Vision Task Force Charter.pdf More Documents & Publications State Energy Advisory Board November 2011 Meeting Guide to Community Energy Strategic Planning State ...

  14. Experimental characterization of edge force on the Crookes radiometer

    SciTech Connect (OSTI)

    Ventura, Austin L.; Ketsdever, Andrew D.; Gimelshein, Natalia E.; Gimelshein, Sergey F.

    2014-12-09

    The contribution of edge force on the Crookes radiometer is experimentally investigated with three vane geometries. This work examines increasing the force per unit weight of a radiometer vane for applications such as near-space propulsion by increasing the vanes perimeter while decreasing the total surface area of the vane by means of machined holes in the vanes. Experimental results are given for three vane geometries. These results indicate that although force to vane weight ratios can be improved, the maximum force is achieved by a vane geometry that contains no hole features.

  15. Interagency Task Force Report on Agency Recommendations, Conditions...

    Open Energy Info (EERE)

    Agriculture, Environmental Protection Agency, Advisory Council on Historic Preservation (Work Group on the Coordination of Federal Mandates). 2001. Interagency Task Force Report...

  16. A measurable force driven by an excitonic condensate

    SciTech Connect (OSTI)

    Hakio?lu, T.; zgn, Ege; Gnay, Mehmet

    2014-04-21

    Free energy signatures related to the measurement of an emergent force (?10{sup ?9}N) due to the exciton condensate (EC) in Double Quantum Wells are predicted and experiments are proposed to measure the effects. The EC-force is attractive and reminiscent of the Casimir force between two perfect metallic plates, but also distinctively different from it by its driving mechanism and dependence on the parameters of the condensate. The proposed experiments are based on a recent experimental work on a driven micromechanical oscillator. Conclusive observations of EC in recent experiments also provide a strong promise for the observation of the EC-force.

  17. Mechanism of force mode dip-pen nanolithography

    SciTech Connect (OSTI)

    Yang, Haijun E-mail: swguo@sjtu.edu.cn; Xie, Hui; Rong, Weibin; Sun, Lining; Wu, Haixia; Guo, Shouwu E-mail: swguo@sjtu.edu.cn

    2014-05-07

    In this work, the underlying mechanism of the force mode dip-pen nanolithography (FMDPN) is investigated in depth by analyzing force curves, tapping mode deflection signals, and Z-scan voltage variations during the FMDPN. The operation parameters including the relative trigger threshold and surface delay parameters are vital to control the loading force and dwell time for ink deposition during FMDPN. A model is also developed to simulate the interactions between the atomic force microscope tip and soft substrate during FMDPN, and verified by its good performance in fitting our experimental data.

  18. Federal Task Force Sends Recommendations to President on Fostering...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WASHINGTON - President Obama's Interagency Task Force on Carbon Capture and Storage (CCS), ... the barriers to the widespread, cost-effective deployment of CCS within 10 years. ...

  19. Air Force Achieves Fuel Efficiency through Industry Best Practices

    SciTech Connect (OSTI)

    2012-12-01

    The U.S. Air Forces Air Mobility Command (AMC) is changing the way it does business. It is saving energy and money through an aircraft fleet fuel-efficiency program inspired by private industry best practices and ideas resulting from the empowered fuel savings culture.

  20. Forces and moments on a slender, cavitating body

    SciTech Connect (OSTI)

    Hailey, C.E.; Clark, E.L.; Buffington, R.J.

    1988-01-01

    Recently a numerical code has been developed at Sandia National Laboratories to predict the pitching moment, normal force, and axial force of a slender, supercavitating shape. The potential flow about the body and cavity is calculated using an axial distribution of source/sink elements. The cavity surface is assumed to be a constant pressure streamline, extending beyond the base of the model. Slender body approximation is used to model the crossflow for small angles of attack. A significant extension of previous work in cavitation flow is the inclusion of laminar and turbulent boundary layer solutions on the body. Predictions with this code, for axial force at zero angle of attack, show good agreement with experiments. There are virtually no published data availble with which to benchmark the pitching moment and normal force predictions. An experiment was designed to measure forces and moments on a supercavitation shape. The primary reason for the test was to obtain much needed data to benchmark the hydrodynamic force and moment predictions. Since the numerical prediction is for super cavitating shapes at very small cavitation numbers, the experiment was designed to be a ventilated cavity test. This paper describes the experimental procedure used to measure the pitching moment, axial and normal forces, and base pressure on a slender body with a ventilated cavity. Limited results are presented for pitching moment and normal force. 5 refs., 7 figs.

  1. Wavenumber Locking And Pattern Formation In Spatially Forced Systems

    SciTech Connect (OSTI)

    Hagberg, Aric; Meron, Ehud; Manor, Rotem

    2008-01-01

    We study wavenumber locking and pattern formation resulting from weak spatially periodic one-dimensional forcing of two-dimensional systems. We consider systems that support stationary or traveling stripe patterns in the absence of the forcing, and assume that the one-dimensional forcing is aligned with the direction of the stripe patterns. When the forcing wavenumber is about twice as large as the wavenumber of the unforced system we find that the forcing can either select or stabilize a resonant stripe solution at half the forcing wavenumber, or create a new resonant solution. When the wavenumber mismatch is high we find that the wave-vector component of the pattern in the direction of the forcing can stilI lock at half the forcing wavenumber, but a wave-vector component in the orthogonal direction develops to compensate for the total wavenumber. As a result stationary two-dimensional rectangular and oblique patterns form. When the unforced system supports traveling waves resonant rectangular patterns remain stationary but the oblique patterns travel in a direction orthogonal to the traveling-waves.

  2. Report from the Next Generation High Performance Computing Task Force

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Secretary of Energy Advisory Board Report of the Task Force on Next Generation High Performance Computing August 18, 2014 U.S. Department of Energy 1 Final Version for Approval Charge to the SEAB High Performance Computing Task Force ......................................................... 4 Executive Summary ...................................................................................................................... 4 Key Findings

  3. Gauge and averaging in gravitational self-force

    SciTech Connect (OSTI)

    Gralla, Samuel E.

    2011-10-15

    A difficulty with previous treatments of the gravitational self-force is that an explicit formula for the force is available only in a particular gauge (Lorenz gauge), where the force in other gauges must be found through a transformation law once the Lorenz-gauge force is known. For a class of gauges satisfying a 'parity condition' ensuring that the Hamiltonian center of mass of the particle is well-defined, I show that the gravitational self-force is always given by the angle average of the bare gravitational force. To derive this result I replace the computational strategy of previous work with a new approach, wherein the form of the force is first fixed up to a gauge-invariant piece by simple manipulations, and then that piece is determined by working in a gauge designed specifically to simplify the computation. This offers significant computational savings over the Lorenz gauge, since the Hadamard expansion is avoided entirely and the metric perturbation takes a very simple form. I also show that the rest mass of the particle does not evolve due to first-order self-force effects. Finally, I consider the 'mode sum regularization' scheme for computing the self-force in black hole background spacetimes, and use the angle-average form of the force to show that the same mode-by-mode subtraction may be performed in all parity-regular gauges. It appears plausible that suitably modified versions of the Regge-Wheeler and radiation gauges (convenient to Schwarzschild and Kerr, respectively) are in this class.

  4. Black Carbon Radiative Forcing over the Tibetan Plateau

    SciTech Connect (OSTI)

    He, Cenlin; Li, Qinbin; Liou, K. N.; Takano, Y.; Gu, Yu; Qi, L.; Mao, Yuhao; Leung, Lai-Yung R.

    2014-11-28

    We estimate the snow albedo forcing and direct radiative forcing (DRF) of black carbon (BC) in the Tibetan Plateau using a global chemical transport model in conjunction with a stochastic snow model and a radiative transfer model. Our best estimate of the annual BC snow albedo forcing in the Plateau is 2.9 W m-2 (uncertainty: 1.55.0 W m-226 ). We find that BC-snow internal mixing increases the albedo forcing by 40-60% compared with external mixing and coated BC increases the forcing by 30-50% compared with uncoated BC, whereas Koch snowflakes reduce the forcing by 20-40% relative to spherical snow grains. Our best estimate of the annual BC DRF at the top of the atmosphere is 2.3 W m-2 (uncertainty: 0.74.3 W m-230 ) in the Plateau after scaling the modeled BC absorption optical depth to Aerosol Robotic Network (AERONET) observations. The BC forcings are attributed to emissions from different regions.

  5. Local nonlinear rf forces in inhomogeneous magnetized plasmas

    SciTech Connect (OSTI)

    Chen, Jiale; Gao, Zhe

    2014-06-15

    The local nonlinear forces induced by radio frequency (rf) waves are derived in inhomogeneous magnetized plasmas, where the inhomogeneity exists in the rf fields, in the static magnetic field as well as in the equilibrium density and temperature. The local parallel force is completely resonant, but a novel component dependent on those inhomogeneities is obtained as the result of the inhomogeneous transport of parallel resonant-absorbed momentum by the nonlinear perpendicular drift flux. In the local poloidal force, the component induced by the inhomogeneity of rf power absorption is also confirmed and it can be recognized as the residual effect from the incomplete cancellation between the rate of the diamagnetic poloidal momentum gain and the Lorentz force due to the radial diffusion-like flux. The compact expression for radial force is also obtained for the first time, whose nonresonant component is expressed as the sum of the ponderomotive force on particles and the gradients of the nonresonant perpendicular pressure and of the nonresonant momentum flux due to the finite temperature effect. Numerical calculations in a 1-D slab model show that the resonant component dependent on the inhomogeneities may be significant when the ion absorption dominates the resonant wave-particle interaction. A quantitative estimation shows that the novel component in the parallel force is important to understand the experiments of the ion-cyclotron-frequency mode-conversion flow drive.

  6. Comparison of Cellulose Ib Simulations with Three Carbohydrate Force Fields

    SciTech Connect (OSTI)

    Matthews, J. F.; Beckham, G. T.; Bergenstrahle, M.; Brady, J. W.; Himmel, M. E.; Crowley, M. F.

    2012-02-14

    Molecular dynamics simulations of cellulose have recently become more prevalent due to increased interest in renewable energy applications, and many atomistic and coarse-grained force fields exist that can be applied to cellulose. However, to date no systematic comparison between carbohydrate force fields has been conducted for this important system. To that end, we present a molecular dynamics simulation study of hydrated, 36-chain cellulose I{beta} microfibrils at room temperature with three carbohydrate force fields (CHARMM35, GLYCAM06, and Gromos 45a4) up to the near-microsecond time scale. Our results indicate that each of these simulated microfibrils diverge from the cellulose I{beta} crystal structure to varying degrees under the conditions tested. The CHARMM35 and GLYCAM06 force fields eventually result in structures similar to those observed at 500 K with the same force fields, which are consistent with the experimentally observed high-temperature behavior of cellulose I. The third force field, Gromos 45a4, produces behavior significantly different from experiment, from the other two force fields, and from previously reported simulations with this force field using shorter simulation times and constrained periodic boundary conditions. For the GLYCAM06 force field, initial hydrogen-bond conformations and choice of electrostatic scaling factors significantly affect the rate of structural divergence. Our results suggest dramatically different time scales for convergence of properties of interest, which is important in the design of computational studies and comparisons to experimental data. This study highlights that further experimental and theoretical work is required to understand the structure of small diameter cellulose microfibrils typical of plant cellulose.

  7. ARM - PI Product - Continuous Forcing Data, Darwin, Australia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsContinuous Forcing Data, Darwin, Australia ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Continuous Forcing Data, Darwin, Australia Long term, large scale continuous forcing data set for three complete wet seasons (2004-2005, 2005-2006 and 2006-2007) in Darwin, Australia. Data Details Contact Christian Jakob Monash University christian.jakob@monash.edu +61 3 9905 4461 School of Earth,

  8. ARM - PI Product - SCM Forcing Data Derived from NWP Analyses

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsSCM Forcing Data Derived from NWP Analyses ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : SCM Forcing Data Derived from NWP Analyses Forcing data, suitable for use with single column models (SCMs) and cloud resolving models (CRMs), have been derived from NWP analyses for the ARM (Atmospheric Radiation Measurement) Tropical Western Pacific (TWP) sites of Manus Island and Nauru. Data Details

  9. Approximate photochemical dynamics of azobenzene with reactive force fields

    SciTech Connect (OSTI)

    Li, Yan; Hartke, Bernd

    2013-12-14

    We have fitted reactive force fields of the ReaxFF type to the ground and first excited electronic states of azobenzene, using global parameter optimization by genetic algorithms. Upon coupling with a simple energy-gap transition probability model, this setup allows for completely force-field-based simulations of photochemical cis?trans- and trans?cis-isomerizations of azobenzene, with qualitatively acceptable quantum yields. This paves the way towards large-scale dynamics simulations of molecular machines, including bond breaking and formation (via the reactive force field) as well as photochemical engines (presented in this work)

  10. Effects of realistic tensor force on nuclear structure

    SciTech Connect (OSTI)

    Nakada, H.

    2012-10-20

    First-order tensor-force effects on nuclear structure are investigated in the self-consistent mean-field and RPA calculations with the M3Y-type semi-realistic interactions, which contain the realistic tensor force. The tensor force plays a key role in Z- or N-dependence of the shell structure, and in transitions involving spin degrees-of-freedom. It is demonstrated that the semi-realistic interactions successfully describe the N-dependence of the shell structure in the proton-magic nuclei (e.g. Ca and Sn), and the magnetic transitions (e.g. M1 transition in {sup 208}Pb).

  11. Workshop on Atomic Force Microscopy, Nanometrology and More ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Swarna Addepalli 2012.12.17 One of my colleagues from our global research center in India, K.G. V. Siva Kumar (Sivakumar), recently attended a workshop on Atomic Force...

  12. Force Field Parameter Estimation of Functional Perfluoropolyether Lubricants

    SciTech Connect (OSTI)

    Smith, R.; Chung, P.S.; Steckel, J; Jhon, M.S.; Biegler, L.T.

    2011-01-01

    The head disk interface in a hard disk drive can be considered to be one of the hierarchical multiscale systems, which require the hybridization of multiscale modeling methods with coarse-graining procedure. However, the fundamental force field parameters are required to enable the coarse-graining procedure from atomistic/molecular scale to mesoscale models. In this paper, we investigate beyond molecular level and perform ab initio calculations to obtain the force field parameters. Intramolecular force field parameters for Zdol and Ztetraol were evaluated with truncated PFPE molecules to allow for feasible quantum calculations while still maintaining the characteristic chemical structure of the end groups. Using the harmonic approximation to the bond and angle potentials, the parameters were derived from the Hessian matrix, and the dihedral force constants are fit to the torsional energy profiles generated by a series of constrained molecular geometry optimization.

  13. Proton Dripping Tests a Fundamental Force of Nature

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    off, similar to the water in this photo, leaving an oxygen-13 nucleus behind. Like gravity, the strong interaction is a fundamental force of nature. It is the essential "glue"...

  14. Colorado - Report of the Task Force on Statewide Transmission...

    Open Energy Info (EERE)

    Colorado - Report of the Task Force on Statewide Transmission Siting and Permitting Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Colorado - Report of...

  15. Report of the SEAB Hubs+ Task Force | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    the new Funding Constructs for Energy Research and Development (R&D) in the Department of Energy. The Task Force was charged with assisting the DOE in evaluating the management and...

  16. Force Field Parameter Estimation of Functional Perfluoropolyether Lubricants

    SciTech Connect (OSTI)

    Smith, R.; Chung, P.S.; Steckel, J; Jhon, M.S.; Biegler, L.T.

    2011-01-01

    The head disk interface in hard disk drive can be considered one of the hierarchical multiscale systems, which require the hybridization of multiscale modeling methods with coarse-graining procedure. However, the fundamental force field parameters are required to enable the coarse-graining procedure from atomistic/molecular scale to mesoscale models .In this paper, we investigate beyond molecular level and perform ab-initio calculations to obtain the force field parameters. Intramolecular force field parameters for the Zdol and Ztetraol were evaluated with truncated PFPE molecules to allow for feasible quantum calculations while still maintaining the characteristic chemical structure of the end groups. Using the harmonic approximation to the bond and angle potentials, the parameters were derived from the Hessian matrix, and the dihedral force constants are fit to the torsional energy profiles generated by a series of constrained molecular geometry optimization.

  17. Air Force Generic In-Kind Consideration Trust Agreement | Open...

    Open Energy Info (EERE)

    Trust Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Air Force Generic In-Kind Consideration Trust AgreementLegal Abstract...

  18. July 15, 2014 SEAB Task Force Meeting on Technology Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    July 15, 2014 AGENDA Opening Remarks by Richard Meserve, Task Force Chair 9:45-10:00AM Overview of DOE Office of Environmental Management (EM) (Download) 10:00-11:00AM Rodrigo ...

  19. Air Force Generic In-Kind Consideration Delivery Agreement |...

    Open Energy Info (EERE)

    Delivery Agreement Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Air Force Generic In-Kind Consideration Delivery AgreementLegal...

  20. Air Force Achieves Fuel Efficiency through Industry Best Practices...

    Energy Savers [EERE]

    Documents & Publications U.S. Air Force Energy Program Presentation Airlines & Aviation Alternative Fuels: Our Drive to Be Early Market Adopters Report of the DOE-DOE Workshop on...

  1. Microsoft Word - Energy Code Enforcement Funding Task Force ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Microsoft Word - Energy Code Enforcement Funding Task Force - Fact Sheet ... - T4VEICTO2 Sub3Residential Retrofit Program Design Guide Play BookTEAM 4 FINAL.docx

  2. Air Force Guide to Unsolicited Proposals | Open Energy Information

    Open Energy Info (EERE)

    Guide to Unsolicited Proposals Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Air Force Guide to Unsolicited ProposalsLegal Abstract...

  3. Federal Protective Force - DOE Directives, Delegations, and Requiremen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for the management and operation of the Department of Energy (DOE) Federal protective forces (FPFs). Cancels DOE M 470.4-3, Chg 1. Canceled by DOE O 473.3. m4704-8.pdf -- PDF...

  4. FORCE RECONSTRUCTION USING THE SUM OF WEIGHTED ACCELERATIONS

    Office of Scientific and Technical Information (OSTI)

    ... Insteadof invertinga FRF (dof) s(t) is defined as matrix to reconstructthe applied force, ... The only where w i are scalar weights. The SWAT dof can be difficultywith this technique ...

  5. LORENTZ SELF-FORCE OF AN ELLIPSE CURRENT LOOP MODEL

    SciTech Connect (OSTI)

    Olmedo, Oscar; Zhang Jie; Kunkel, Valbona

    2013-07-10

    In this work, the Lorentz self-force of an ellipse current loop model is derived. We are motivated by the fact that it has been reported in the literature that coronal mass ejection morphology can resemble an ellipse in the field of view of coronagraph images. Deriving the Lorentz self-force using an ellipse geometry has the advantage of being able to be solved analytically, as opposed to other more complex geometries. The derived ellipse model is compared with the local curvature approximation, where the Lorentz self-force at the ellipse major/minor axis is compared with the Lorentz self-force of a torus with curvature equal to the local curvature at the ellipses major/minor axis. It is found that the local curvature approximation is valid for moderate values of eccentricity.

  6. Zero-Gravity Centrifugal Force | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to create centrifugal force create its on gravity? Example if you were spinning a iron ball in space, just as the earth spins, does the iron ball create its on gravity? scott...

  7. ARI Task Force, ECA Work to Stimulate Regional Economies

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – DOE’s Asset Revitalization Initiative (ARI) Task Force met with the Energy Communities Alliance (ECA) this week to advance the Department’s processes for transferring excess land...

  8. Transport Task Force (TTF) 2011 | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 6, 2011, 9:00am to April 9, 2011, 5:00pm Conference Bahia Resort Hotel San Diego, CA USA Transport Task Force (TTF) 2011 The ultimate goal of the work of the Transport Task...

  9. Task Force for Strategic Developments to Blue Ribbon Commission

    Office of Environmental Management (EM)

    Recommendations | Department of Energy Task Force for Strategic Developments to Blue Ribbon Commission Recommendations Task Force for Strategic Developments to Blue Ribbon Commission Recommendations Formed at the direction of the President to Secretary Chu and included leading experts. Purpose to conduct a comprehensive review of polices for managing the back end of the nuclear fuel cycle; i.e., recycle before storage and permanent disposal. Detailed analysis, with eight major

  10. Using Atom Interferometry to Search for New Forces

    SciTech Connect (OSTI)

    Wacker, Jay G.; /SLAC

    2009-12-11

    Atom interferometry is a rapidly advancing field and this Letter proposes an experiment based on existing technology that can search for new short distance forces. With current technology it is possible to improve the sensitivity by up to a factor of 10{sup 2} and near-future advances will be able to rewrite the limits for forces with ranges from 100 {micro}m to 1km.

  11. A Nanocrystal Sensor for Luminescence Detection of Cellular Forces

    SciTech Connect (OSTI)

    Choi, Charina; Chou, Jonathan; Lutker, Katie; Werb, Zena; Alivisatos, Paul

    2011-09-29

    Quantum dots have been used as bright fluorescent tags with high photostability to probe numerous biological systems. In this work we present the tetrapod quantum dot as a dynamic, next-generation nanocrystal probe that fluorescently reports cellular forces with spatial and temporal resolution. Its small size and colloidal state suggest that the tetrapod may be further developed as a tool to measure cellular forces in vivo and with macromolecular spatial resolution.

  12. Radiative forcing in the ACCMIP historical and future climate simulations

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Radiative forcing in the ACCMIP historical and future climate simulations Citation Details In-Document Search Title: Radiative forcing in the ACCMIP historical and future climate simulations The Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP) examined the short-lived drivers of climate change in current climate models. Here we evaluate the 10 ACCMIP models that included aerosols, 8 of which also participated in the Coupled Model

  13. Evaluating the Contribution of Climate Forcing and Forest Dynamics to

    Office of Scientific and Technical Information (OSTI)

    Accelerating Carbon Sequestration by Forest Ecosystems in the Northeastern U.S. (Technical Report) | SciTech Connect SciTech Connect Search Results Technical Report: Evaluating the Contribution of Climate Forcing and Forest Dynamics to Accelerating Carbon Sequestration by Forest Ecosystems in the Northeastern U.S. Citation Details In-Document Search Title: Evaluating the Contribution of Climate Forcing and Forest Dynamics to Accelerating Carbon Sequestration by Forest Ecosystems in the

  14. Exploring Local Electrostatic Effects: implications for piezoresponse force

    Office of Scientific and Technical Information (OSTI)

    microscopy and triboelectricity (Journal Article) | SciTech Connect Exploring Local Electrostatic Effects: implications for piezoresponse force microscopy and triboelectricity Citation Details In-Document Search Title: Exploring Local Electrostatic Effects: implications for piezoresponse force microscopy and triboelectricity Authors: Balke, Nina [1] ; Maksymovych, Petro [1] ; Jesse, Stephen [1] ; Kravchenko, Ivan I [1] ; Li, Qian [1] ; Kalinin, Sergei [2] + Show Author Affiliations ORNL Oak

  15. Coating thickness and coverage effects on the forces between silica

    Office of Scientific and Technical Information (OSTI)

    nanoparticles in water. (Journal Article) | SciTech Connect Coating thickness and coverage effects on the forces between silica nanoparticles in water. Citation Details In-Document Search Title: Coating thickness and coverage effects on the forces between silica nanoparticles in water. Abstract not provided. Authors: Salerno, Kenneth Michael ; Lane, J. Matthew ; Grest, Gary S. ; Ismail, Ahmed E. Publication Date: 2014-01-01 OSTI Identifier: 1140719 Report Number(s): SAND2014-0781J Journal

  16. Evaluating the Contribution of Climate Forcing and Forest Dynamics to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accelerating Carbon Sequestration by Forest Ecosystems in the Northeastern U.S. (Technical Report) | SciTech Connect Evaluating the Contribution of Climate Forcing and Forest Dynamics to Accelerating Carbon Sequestration by Forest Ecosystems in the Northeastern U.S. Citation Details In-Document Search Title: Evaluating the Contribution of Climate Forcing and Forest Dynamics to Accelerating Carbon Sequestration by Forest Ecosystems in the Northeastern U.S. We used 10 Hz eddy flux signals and

  17. ARM - Evaluation Product - CMWG Data - SCM-Forcing Data, Cloud

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microphysical Properties and Radiative Heating Profiles ProductsCMWG Data - SCM-Forcing Data, Cloud Microphysical Properties and Radiative Heating Profiles ARM Data Discovery Browse Data Documentation Use the Data File Inventory tool to view data availability at the file level. Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : CMWG Data - SCM-Forcing Data, Cloud Microphysical Properties and Radiative Heating Profiles

  18. Force Modulation System for Vehicle Manufacturing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Force Modulation System for Vehicle Manufacturing Force Modulation System for Vehicle Manufacturing Novel Technology Enables Energy-Efficient Production of High-Strength Steel Automotive Parts Recent U.S. automobile sales show a growing demand for more fuel-efficient and environmentally-friendly vehicles, including hybrids. The U.S. auto industry is pursuing at least two parallel paths to address these market evolutions. The first path involves design changes in the engine plant, such as

  19. Building Bridges: Federal Agencies Join Forces to Promote Sustainable,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resilient Tribal Communities | Department of Energy Building Bridges: Federal Agencies Join Forces to Promote Sustainable, Resilient Tribal Communities Building Bridges: Federal Agencies Join Forces to Promote Sustainable, Resilient Tribal Communities October 20, 2014 - 5:00pm Addthis Based on feedback received during the annual White House Tribal Nations Conference, President Obama established the White House Council on Native American Affairs in June 2013. Chaired by Department of the

  20. Final Gulf Coast Ecosystem Restoration Task Force Strategic Plan |

    Office of Environmental Management (EM)

    Department of Energy Final Gulf Coast Ecosystem Restoration Task Force Strategic Plan Final Gulf Coast Ecosystem Restoration Task Force Strategic Plan The natural resources of the Gulf's ecosystem are vital to many of the region's industries that directly support economic progress and job creation, including tourism and recreation, seafood production and sales, energy production and navigation and commerce. Among the key priorities of the strategy are: 1) Stopping the Loss of Critical

  1. July 2012, Work Force Retention Work Group Status Overview

    Office of Environmental Management (EM)

    Work Force Retention Work Group Status Overview Accomplishments: 1. Progress on the completion of the 10 CFR 1046 modifications to address barriers to workforce retention. Written response to public comment is being drafted by HS-51. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group

  2. Joining Forces: Clean Energy Companies Commit to Hire Veterans | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Joining Forces: Clean Energy Companies Commit to Hire Veterans Joining Forces: Clean Energy Companies Commit to Hire Veterans April 27, 2015 - 9:15am Addthis AirStreams Renewables trains veterans on how to get certified to work on wind towers. Last Thursday, the First Lady announced that companies from the energy, manufacturing, transportation and information technology sectors have committed to hiring approximately 90,000 veterans and military spouses over the next five years. |

  3. F.E. Warren Air Force Base Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    F.E. Warren Air Force Base Wind Farm Jump to: navigation, search Name F.E. Warren Air Force Base Wind Farm Facility F.E. Warren Air Force Base Sector Wind energy Facility Type...

  4. Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology...

    Energy Savers [EERE]

    Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology Development Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology Development Presentation...

  5. The Secretary of Energy Advisory Board (SEAB) Task Force on DOE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Secretary of Energy Advisory Board (SEAB) Task Force on DOE National Laboratories The Secretary of Energy Advisory Board (SEAB) Task Force on DOE National Laboratories The...

  6. Detection of forced oscillations in power systems with multichannel methods

    SciTech Connect (OSTI)

    Follum, James D.

    2015-09-30

    The increasing availability of high fidelity, geographically dispersed measurements in power systems improves the ability of researchers and engineers to study dynamic behaviors in the grid. One such behavior that is garnering increased attention is the presence of forced oscillations. Power system engineers are interested in forced oscillations because they are often symptomatic of the malfunction or misoperation of equipment. Though the resulting oscillation is not always large in amplitude, the root cause may be serious. In this report, multi-channel forced oscillation detection methods are developed. These methods leverage previously developed detection approaches based on the periodogram and spectral-coherence. Making use of geographically distributed channels of data is shown to improved detection performance and shorten the delay before an oscillation can be detected in the online environment. Results from simulated and measured power system data are presented.

  7. Determining the role of hydration forces in protein folding

    SciTech Connect (OSTI)

    Sorenson, J.M. [Univ. of California, Berkeley, CA (United States). Dept. of Chemistry] [Univ. of California, Berkeley, CA (United States). Dept. of Chemistry; Hura, G. [Univ. of California, Berkeley, CA (United States)] [Univ. of California, Berkeley, CA (United States); [Lawrence Berkeley National Lab., CA (United States). Life Sciences Div.; Soper, A.K. [Rutherford Appleton Lab., Didcot (United Kingdom). ISIS Facility] [Rutherford Appleton Lab., Didcot (United Kingdom). ISIS Facility; Pertsemlidis, A. [Univ. of Texas Southwestern Medical Center, Dallas, TX (United States). Dept. of Biochemistry] [Univ. of Texas Southwestern Medical Center, Dallas, TX (United States). Dept. of Biochemistry; Head-Gordon, T. [Lawrence Berkeley National Lab., CA (United States)] [Lawrence Berkeley National Lab., CA (United States)

    1999-07-01

    One of the primary issues in protein folding is determining what forces drive folding and eventually stabilize the native state. A delicate balance exists between electrostatic forces such as hydrogen bonding and salt bridges, and the hydrophobic effect, which are present for both intramolecular protein interactions and intermolecular contributions with the surrounding aqueous environment. This article describes a combined experimental, theoretical, and computational effort to show how the complexity of aqueous hydration can influence the structure, folding and aggregation, and stability of model protein systems. The unification of the theoretical and experimental work is the development or discovery of effective amino acid interactions that implicitly include the effects of aqueous solvent. The authors show that consideration of the full range of complexity of aqueous hydration forces such as many-body effects, long-ranged character of aqueous solvation, and the assumptions made about the degree of protein hydrophobicity can directly impact the observed structure, folding, and stability of model protein systems.

  8. Analysis of scrams and forced outages at boiling water reactors

    SciTech Connect (OSTI)

    Earle, R. T.; Sullivan, W. P.; Miller, K. R.; Schwegman, W. J.

    1980-07-01

    This report documents the results of a study of scrams and forced outages at General Electric Boiling Water Reactors (BWRs) operating in the United States. This study was conducted for Sandia Laboratories under a Light Water Reactor Safety Program which it manages for the United States Department of Energy. Operating plant data were used to identify the causes of scrams and forced outages. Causes of scrams and forced outages have been summarized as a function of operating plant and plant age and also ranked according to the number of events per year, outage time per year, and outage time per event. From this ranking, identified potential improvement opportunities were evaluated to determine the associated benefits and impact on plant availability.

  9. On transition from Alfvn resonance to forced magnetic reconnection

    SciTech Connect (OSTI)

    Luan, Q. [MOE Key Lab of Materials Modification by Beams and School of Physics and Optoelectrical Technology, Dalian University of Technology, Dalian 116024 (China); Wang, X., E-mail: xgwang@hit.edu.cn [Department of Physics, Harbin Institute of Technology, Harbin 150001 (China)

    2014-07-15

    We revisit the transition from Alfvn resonance to forced magnetic reconnection with a focus on the property of their singularities. As the driven frequency tends to zero, the logarithmic singularity of Alfvn resonance shifts to the power-law singularity of forced reconnection, due to merging of the two resonance layers. The transition criterion depends on either kinetic effects or dissipations that resolve the singularity. As an example, a small but finite resistivity ? is introduced to investigate the transition process. The transition threshold is then obtained as the driven frequency reaches a level of ?O((?/k){sup 1/3})

  10. Micropatterning of metal substrate by adhesive force lithography

    SciTech Connect (OSTI)

    Seo, Soon-min; Park, Jeong-yong; Lee, Hong H.

    2005-03-28

    We introduce adhesive force lithography (AFL), a detachment-based method for patterning metal surface. In this method, all the polymer layer except for the desired pattern gets lifted up from the metal surface. The craze microstructure unique to thin polymer films on the order of 10{sup 2} nm is utilized for this AFL along with a difference in adhesive force at two interfaces. Poly(urethaneacrylate) mold, which has a high enough work of adhesion with polymer, makes AFL effective. This technique is purely additive, fast ({approx}10 s contact time), and applicable to large area patterning (10 cmx10 cm)

  11. Mitigated-force carriage for high magnetic field environments

    DOE Patents [OSTI]

    Ludtka, Gerard M.; Ludtka, Gail M.; Wilgen, John B.; Murphy, Bart L.

    2015-05-19

    A carriage for high magnetic field environments includes a plurality of work-piece separators disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla for supporting and separating a plurality of work-pieces by a preselected, essentially equal spacing, so that, as a first work-piece is inserted into the magnetic field, a second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

  12. Chiral three-nucleon forces and pairing in nuclei

    SciTech Connect (OSTI)

    Lesinski, Thomas; Hebeler, K.; Duguet, Thomas C; Schwenk, Achim

    2012-01-01

    We present the first study of pairing in nuclei including three-nucleon forces. We perform systematic calculations of the odd-even mass staggering generated using a microscopic pairing interaction at first order in chiral low-momentum interactions. Significant repulsive contributions from the leading chiral three-nucleon forces are found. Two- and three-nucleon interactions combined account for approximately 70% of the experimental pairing gaps, which leaves room for self-energy and induced interaction effects that are expected to be overall attractive in nuclei.

  13. Los Alamos National Security awards protective force contract for Los

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alamos National Laboratory to SOC Los Alamos Protective force contract awarded to SOC Los Alamos Los Alamos National Security awards protective force contract for Los Alamos National Laboratory to SOC Los Alamos The contract is for three years with two one-year extension options and has a value of about $251 million. October 28, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation

  14. WIPP Security Force Recognized for Outstanding Safety | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy WIPP Security Force Recognized for Outstanding Safety WIPP Security Force Recognized for Outstanding Safety May 9, 2013 - 12:00pm Addthis U.S. Department of Energy Carlsbad Field Office Manager Joe Franco (right) presents the Star of Excellence Award to Security Walls, LLC Manager Richard De Los Santos. U.S. Department of Energy Carlsbad Field Office Manager Joe Franco (right) presents the Star of Excellence Award to Security Walls, LLC Manager Richard De Los Santos. Media Contact Deb

  15. Training program to prepare the U.S. DOE laboratories for the entry into force of the protocol additional to the agreement between the United States of America and the International Atomic Energy Agency for the application of safeguards in the United

    SciTech Connect (OSTI)

    Boyer, Brian David; Stevens, Rebecca C; Uribe, Eva C; Sandoval, M Analisa; Valente, John N; Valente, John U; Jo, Jae H; Sellen, Joana

    2009-01-01

    In 2008, a joint team from Brookhaven National Laboratory (BNL) and Los Alamos National Laboratory (LANL) consisting of specialists in training IAEA inspectors in the use of complementary access activities formulated a training program to prepare the U.S DOE laboratories for the entry into force of the U.S. Additional Protocol. Since the U.S. Additional Protocol would allow for IAEA access to the DOE laboratories under the aegis of complementary access activities, the DOE laboratories would need to prepare for such visits. The goal of the training was to ensure that the DOE laboratories would successfully host an IAEA complementary access. In doing so, the labs must be able to provide the IAEA with the information that the IAEA would need to resolve its questions about the U.S. Declaration and declared activities at the lab, and also protect certain equities, as provided under the U.S. Additional Protocol Article 1.b and c. which set forth a 'National Security Exclusion.' This 'NSE' states that the AP provisions apply within the United States 'excluding only instances where its application would result in access by the Agency to activities with direct national security significance to the United States or to location or information associated with such activities.' These activities are referred to collectively as DNSS-direct national security significance. Furthermore, the U.S. has a specific right to employ managed access, without prejudice to the right under Article 1.b, in connection with activities of DNSS. The provisions in Articles 1.b and 1.c are unique to the U.S. AP, and are additional to the more general right, under Article 7, to use managed access to protect from disclosure proprietary and/or proliferation-sensitive information, and to meet safety and security requirements, that is incorporated directly from the Model Additional Protocol. The BNL-LANL team performed training at Lawrence Livermore National Laboratory, Idaho National Laboratory, and Oak Ridge National Laboratory to cover the situations that these labs, which respectively represent nuclear weapons labs, nuclear energy labs, and science labs and environmental management sites, would encounter during a complementary access. Each of the three labs hosted a mock complementary access activity, which included mock inspectors from the BNL-LANL team. In addition to reviewing the draft declarations from each of the host labs, the BNL-LANL team conducted open source research in a manner similar to what IAEA inspectors would do to research the activities at a location and prepare questions for the location to answer and that would be the focus of a complementary access. The host labs and other labs attending the training found the training to be extremely useful and helpful in making sure that each lab's Additional Protocol team had made correct declarations of nuclear activities, had properly trained staff ready to host and answer IAEA inquiries, and would implement managed access during a complementary access that would provide access by the IAEA team to resolve questions or inconsistencies about a particular declaration and still protect the information addressed by Articles 1 and 7 of the U.S. AP.

  16. Guide for Establishment of a Contingency Protective Force

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-03-27

    The Guide was developed to provide assistance in ensuring continued safe and secure operation of DOE sites and facilities, protection of Departmental employees, and the public in the event of emergency situations involving the establishment and deployment of a contingency protective force and the conduct of sustained operations. Canceled by DOE N 251.80.

  17. A NEW INTERPHASE FORCE IN TWO-PHASE FLUIDIZED BEDS

    SciTech Connect (OSTI)

    D. ZHANG; W. VANDERHEYDEN

    2001-05-01

    Mesoscale structures such as particle clusters have been observed both in experiments and in numerical simulations of circulating fluidized beds. In a numerical simulation, in order to account for the effects of such mesoscale structures, the computational grids have to be fine enough. The use of such fine grids is impractical in engineering applications due to excessive computational costs. To predict the macroscopic behavior of a fluidized bed with reasonable computation cost, they perform a second average over the averaged equations for two-phase flows. A mesoscale inter-phase exchange force is found to be the correlation of the particle volume fraction and the pressure gradient. This force is related to the mesoscale added mass of the two-phase flow. Typically, added mass for particle scale interactions is negligible in gas-solid flows since the gas density is small compared to density of solid particles. However, for a mesoscale structure, such as a bubble, the surrounding media is the mixture of gas and particles. The surrounding fluid density experienced by the mesoscale structure is the density of the surrounding mixture. Therefore, the added mass of a mesoscale structure, such as bubbles, cannot be neglected. The property of this new force is studied based on the numerical simulation of a fluidized bed using high grid resolution. It is shown that this force is important in the region where the particle volume fraction is high. The effects of the inhomogeneity to the interphase drag are also studied.

  18. Memorandum, Protective Force Law Enforcement Authority- May 1, 2009

    Broader source: Energy.gov [DOE]

    Investigation allegations that contractor procetive force personnel at a DOE site exceeded their legistative ,regulatory, and policy-based authority by providing on-duty, armed off-site assistance to local law enforcement authorites during other than recapture/recovery operations, and by accessing the local law enforcement database for background checks during the course of on-site administrative traffic stops.

  19. Furlough or Reduction in Force in the Senior Executive Service

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-05-15

    To establish requirements and assign responsibilities for furlough and reduction in force (RIF) of the Senior Executive Service (SES) in the Department of Energy (DOE) and the National Nuclear Security Administration (NNSA). Supersedes O DOE 3350.1 Chg 1 and DOE 3351.2 Chg 1.

  20. Nuclear Radiological Threat Task Force Established | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration Radiological Threat Task Force Established | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets Newsletters Press Releases Photo

  1. Operation Ivy. Joint Task Force 132, 1952. Final report

    SciTech Connect (OSTI)

    Not Available

    1985-09-01

    This report covers the activities of the Joint Task Force 132 in Operation Ivy, in 1952 at Eniwetok Atoll. Shots Mike and King were detonated in conjunction with eleven experimental programs. This report describes the device, weapon, and experimental programs, giving as many preliminary conclusions as can be drawn from early analysis of the data.

  2. Urban Consortium Energy Task Force - Year 21 Final Report

    SciTech Connect (OSTI)

    2003-04-01

    The Urban Consortium Energy Task Force (UCETF), comprised of representatives of large cities and counties in the United States, is a subgroup of the Urban Consortium, an organization of the nation's largest cities and counties joined together to identify, develop and deploy innovative approaches and technological solutions to pressing urban issues.

  3. Physicists hunt for dark forces at Jefferson Lab ( Nature) | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hunt-for-dark-forces-1.10386 Submitted: Tuesday, April 3, 2012 - 12

  4. Demonstration of Security Benefits of Renewable Generation at FE Warren Air Force Base

    SciTech Connect (OSTI)

    Warwick, William M.; Myers, Kurt; Seifert, Gary

    2010-12-31

    Report detailing field demonstration of security benefits of renewable generation at FE Warren Air Force Base.

  5. Collaborative Research: Separating Forced and Unforced Decadal Predictability in Models and Observations

    SciTech Connect (OSTI)

    DelSole, Timothy

    2015-11-30

    Collaborative Research: Separating Forced and Unforced Decadal Predictability in Models and Observations

  6. Force Control and Nonlinear Master-Slave Force Profile to Manage an Admittance Type Multi-Fingered Haptic User Interface

    SciTech Connect (OSTI)

    Anthony L. Crawford

    2012-08-01

    Natural movements and force feedback are important elements in using teleoperated equipment if complex and speedy manipulation tasks are to be accomplished in remote and/or hazardous environments, such as hot cells, glove boxes, decommissioning, explosives disarmament, and space to name a few. In order to achieve this end the research presented in this paper has developed an admittance type exoskeleton like multi-fingered haptic hand user interface that secures the users palm and provides 3-dimensional force feedback to the users fingertips. Atypical to conventional haptic hand user interfaces that limit themselves to integrating the human hands characteristics just into the systems mechanical design this system also perpetuates that inspiration into the designed user interfaces controller. This is achieved by manifesting the property differences of manipulation and grasping activities as they pertain to the human hand into a nonlinear master-slave force relationship. The results presented in this paper show that the admittance-type system has sufficient bandwidth that it appears nearly transparent to the user when the user is in free motion and when the system is subjected to a manipulation task, increased performance is achieved using the nonlinear force relationship compared to the traditional linear scaling techniques implemented in the vast majority of systems.

  7. U.S. - Canada Power System Outage Task Force: Final Report on the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation of Task Force Recommendations | Department of Energy - Canada Power System Outage Task Force: Final Report on the Implementation of Task Force Recommendations U.S. - Canada Power System Outage Task Force: Final Report on the Implementation of Task Force Recommendations On August 14, 2003, the largest power blackout in North American history affected an area with an estimated 50 million people and 61,800 megawatts (MW) of electric load in the states of Ohio, Michigan,

  8. DESIGN AND CONSTRUCTION OF A FORCE-REFLECTING TELEOPERATION SYSTEM

    SciTech Connect (OSTI)

    M.A. Ebadian, Ph.D.

    1999-01-01

    For certain applications, such as space servicing, undersea operations, and hazardous material handling tasks in nuclear reactors, the environments can be uncertain, complex, and hazardous. Lives may be in danger if humans were to work under these conditions. As a result, a man-machine system--a teleoperator system--has been developed to work in these types of environments. In a typical teleoperator system, the actual system operates at a remote site; the operator located away from this system usually receives visual information from a video image and/or graphical animation on the computer screen. Additional feedback, such as aural and force information, can significantly enhance performance of the system. Force reflection is a type of feedback in which forces experienced by the remote manipulator are fed back to the manual controller. Various control methods have been proposed for implementation on a teleoperator system. In order to examine different control schemes, a one Degree-Of-Freedom (DOF) Force-Reflecting Manual Controller (FRMC) is constructed and integrated into a PC. The system parameters are identified and constructed as a mathematical model. The Proportional-Integral-Derivative (PID) and fuzzy logic controllers are developed and tested experimentally. Numerical simulation results obtained from the mathematical model are compared with those of experimental data for both types of controllers. In addition, the concept of a telesensation system is introduced. A telesensation system is an advanced teleoperator system that attempts to provide the operator with sensory feedback. In this context, a telesensation system integrates the use of a Virtual Reality (VR) unit, FRMC, and Graphical User Interface (GUI). The VR unit is used to provide the operator with a 3-D visual effect. Various commercial VR units are reviewed and features compared for use in a telesensation system. As for the FRMC, the conceptual design of a 3-DOF FRMC is developed in an effort to make the system portable, compact, and lightweight. A variety of design alternatives are presented and evaluated. Finally, a GUI software package is developed to interface with several teleoperation unit components. These components include an industrial robot, electric motor, encoder, force/torque sensor, and CCD camera. The software includes features such as position scaling, force scaling, and rereferencing and is intended to provide a sound basis for the development of a multi-DOF FRMC system in the future.

  9. Eielson Air Force Base Operable Unit 2 baseline risk assessment

    SciTech Connect (OSTI)

    Lewis, R.E.; Jarvis, T.T.; Jarvis, M.R.; Whelan, G.

    1994-10-01

    Operable Unit 2 at Eielson Air Force Base (AFB) near Fairbanks, is one of several operable units characterized by petroleum, oil, and lubricant contamination, and by the presence of organic products floating at the water table, as a result of Air Force operations since the 1940s. The base is approximately 19,270 acres in size, and comprises the areas for military operations and a residential neighborhood for military dependents. Within Operable Unit 2, there are seven source areas. These source areas were grouped together primarily because of the contaminants released and hence are not necessarily in geographical proximity. Source area ST10 includes a surface water body (Hardfill Lake) next to a fuel spill area. The primary constituents of concern for human health include benzene, toluene, ethylbenzene, and xylenes (BTEX). Monitored data showed these volatile constituents to be present in groundwater wells. The data also showed an elevated level of trace metals in groundwater.

  10. Mitigated-force carriage for high magnetic field environments

    DOE Patents [OSTI]

    Ludtka, Gerard M; Ludtka, Gail M; Wilgen, John B; Murphy, Bart L

    2014-05-20

    A carriage for high magnetic field environments includes a first work-piece holding means for holding a first work-piece, the first work-piece holding means being disposed in an operable relationship with a work-piece processing magnet having a magnetic field strength of at least 1 Tesla. The first work-piece holding means is further disposed in operable connection with a second work-piece holding means for holding a second work-piece so that, as the first work-piece is inserted into the magnetic field, the second work-piece is simultaneously withdrawn from the magnetic field, so that an attractive magnetic force imparted on the first work-piece offsets a resistive magnetic force imparted on the second work-piece.

  11. Intermodulation electrostatic force microscopy for imaging surface photo-voltage

    SciTech Connect (OSTI)

    Borgani, Riccardo Forchheimer, Daniel; Thorn, Per-Anders; Haviland, David B.; Bergqvist, Jonas; Ingans, Olle

    2014-10-06

    We demonstrate an alternative to Kelvin Probe Force Microscopy for imaging surface potential. The open-loop, single-pass technique applies a low-frequency AC voltage to the atomic force microscopy tip while driving the cantilever near its resonance frequency. Frequency mixing due to the nonlinear capacitance gives intermodulation products of the two drive frequencies near the cantilever resonance, where they are measured with high signal to noise ratio. Analysis of this intermodulation response allows for quantitative reconstruction of the contact potential difference. We derive the theory of the method, validate it with numerical simulation and a control experiment, and we demonstrate its utility for fast imaging of the surface photo-voltage on an organic photo-voltaic material.

  12. Exploration of technologies of use to civil security forces

    SciTech Connect (OSTI)

    Farnum, E.H.; Petrovic, J.J.; McClellan, K.

    1997-10-01

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). Current civilian security may be enhanced by the use of flexible tile technology. This project explored the use of such materials in three areas: bomb disposal containers, portable armor, and protective vests. In particular, there has been no evaluation of the use of flexible tiles, functional graded ceramics, and ballistic modeling codes in developing improved systems. The state of the art in these three areas was reviewed and potential collaborators were contacted. Civil security forces, both state and Laboratory, were interviewed to determine issues and needs. From a collaboration established with the New Mexico State Police, the authors now know that the technology has the potential to increase protection without adding undue weight and will be usable by civilian police forces for some applications.

  13. Sensitive magnetic force detection with a carbon nanotube resonator

    SciTech Connect (OSTI)

    Willick, Kyle; Haapamaki, Chris; Baugh, Jonathan

    2014-03-21

    We propose a technique for sensitive magnetic point force detection using a suspended carbon nanotube (CNT) mechanical resonator combined with a magnetic field gradient generated by a ferromagnetic gate electrode. Numerical calculations of the mechanical resonance frequency show that single Bohr magneton changes in the magnetic state of an individual magnetic molecule grafted to the CNT can translate to detectable frequency shifts, on the order of a few kHz. The dependences of the resonator response to device parameters such as length, tension, CNT diameter, and gate voltage are explored and optimal operating conditions are identified. A signal-to-noise analysis shows that, in principle, magnetic switching at the level of a single Bohr magneton can be read out in a single shot on timescales as short as 10??s. This force sensor should enable new studies of spin dynamics in isolated single molecule magnets, free from the crystalline or ensemble settings typically studied.

  14. Dilution and resonance-enhanced repulsion in nonequilibrium fluctuation forces

    SciTech Connect (OSTI)

    Bimonte, Giuseppe [Dipartimento di Scienze Fisiche, Universita di Napoli Federico II, Complesso Universitario MSA, Via Cintia, I-80126 Napoli (Italy); INFN Sezione di Napoli, I-80126 Napoli (Italy); Emig, Thorsten [Laboratoire de Physique Theorique et Modeles Statistiques, CNRS UMR 8626, Bat. 100, Universite Paris-Sud, F-91405 Orsay cedex (France); Krueger, Matthias; Kardar, Mehran [Massachusetts Institute of Technology, Department of Physics, Cambridge, Massachusetts 02139 (United States)

    2011-10-15

    In equilibrium, forces induced by fluctuations of the electromagnetic field between electrically polarizable objects (microscopic or macroscopic) in vacuum are generically attractive. The force may, however, become repulsive for microscopic particles coupled to thermal baths with different temperatures. We demonstrate that this nonequilibrium repulsion can be realized also between macroscopic objects, as planar slabs, if they are kept at different temperatures. It is shown that repulsion can be enhanced by (i) tuning of material resonances in the thermal region and by (ii) reducing the dielectric contrast due to ''dilution''. This can lead to stable equilibrium positions. We discuss the realization of these effects for aerogels, yielding repulsion down to submicron distances at realistic porosities.

  15. Mirror force induced wave dispersion in Alfvn waves

    SciTech Connect (OSTI)

    Damiano, P. A.; Johnson, J. R.

    2013-06-15

    Recent hybrid MHD-kinetic electron simulations of global scale standing shear Alfvn waves along the Earth's closed dipolar magnetic field lines show that the upward parallel current region within these waves saturates and broadens perpendicular to the ambient magnetic field and that this broadening increases with the electron temperature. Using resistive MHD simulations, with a parallel Ohm's law derived from the linear Knight relation (which expresses the current-voltage relationship along an auroral field line), we explore the nature of this broadening in the context of the increased perpendicular Poynting flux resulting from the increased parallel electric field associated with mirror force effects. This increased Poynting flux facilitates wave energy dispersion across field lines which in-turn allows for electron acceleration to carry the field aligned current on adjacent field lines. This mirror force driven dispersion can dominate over that associated with electron inertial effects for global scale waves.

  16. Common Operating and Response Environment - U.S. Air Force

    Energy Science and Technology Software Center (OSTI)

    2009-10-02

    CORE is an architecture to bridge the gaps between disparate data integration and delivery of disparate information visualization. The CORE Technology Program includes a suite of tools and user-centered staff that can facilitate rapid delivery of a deployable integrated information to users. Integration of Air Force data streams, summarizing the information and providing team members with the information they need to rapidly understand and respond.

  17. ARM - Publications: Science Team Meeting Documents: Cloud Radiative Forcing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at the ARM Climate Research Facility: Part 2. The Vertical Redistribution of Radiant Energy by Clouds. Cloud Radiative Forcing at the ARM Climate Research Facility: Part 2. The Vertical Redistribution of Radiant Energy by Clouds. Mace, Gerald University of Utah Benson, Sally University of Utah Kato, Seiji Hampton University/NASA Langley Research Center Documentation with data of the effects of clouds on the radiant energy balance of the surface and atmosphere represent a critical shortcoming

  18. Direct Aerosol Forcing in the Infrared at the SGP Site?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Direct Aerosol Forcing in the Infrared at the SGP Site? D. D. Turner and C. N. Long Pacific Northwest National Laboratory Richland, Washington Introduction Low level haze is often observed during the night and early morning hours in many locations. This haze is typically formed during quiescent conditions by radiative cooling of the surface, which lowers the ambient temperature and consequently increases the near-surface relative humidity (RH). Many aerosols start to deliquesce around 75%

  19. Efficient Determination of Accurate Force Fields for Porous Material Using

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ab Initio Total Energy Calculations | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Efficient Determination of Accurate Force Fields for Porous Material Using ab Initio Total Energy Calculations Previous Next List Jihan Kim, Li-Chiang Lin, Kyuho Lee, Jeffrey B. Neaton, and Berend Smit, J. Phys. Chem. C , 118, 2693-2701 (2014) DOI: 10.1021/jp412368m Abstract Image Abstract: Accurate characterization of porous materials is essential for understanding

  20. Visualization of Force Fields in Protein Structure Prediction (Conference)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect We describe our force field, the spatial mapping that we used for energy, and the visualizations that we produced from this mapping. We provide images and animations that offer insight into the computational behavior of the energy optimization algorithms that we employ. Authors: Crawford, Clark ; Kreylos, Oliver ; Hamann, Bernd ; Crivelli, Silvia Publication Date: 2005-04-26 OSTI Identifier: 882085 Report Number(s): LBNL--58169 R&D Project: 365963; TRN: US200613%%580

  1. NPT Enters Into Force | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Enters Into Force | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets Newsletters Press Releases Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA

  2. Nano-mechanics of Tunable Adhesion using Non Covalent Forces

    SciTech Connect (OSTI)

    Kenneth Liechti

    2012-09-08

    The objective of this program was to examine, via experiment and atomistic and continuum analysis, coordinated noncovalent bonding over a range of length scales with a view to obtaining modulated, patterned and reversible bonding at the molecular level. The first step in this project was to develop processes for depositing self-assembled monolayers (SAMs) bearing carboxylic acid and amine moieties on Si (111) surfaces and probe tips of an interfacial force microscope (IFM). This allowed the adhesive portion of the interactions between functionalized surfaces to be fully captured in the force-displacement response (force profiles) that are measured by the IFM. The interactionswere extracted in the form of traction-separation laws using combined molecular and continuum stress analyses. In this approach, the results of molecular dynamics analyses of SAMs subjected to simple stress states are used to inform continuum models of their stress-strain behavior. Continuum analyses of the IFM experiment were then conducted, which incorporate the stress-strain behavior of the SAMs and traction-separation relations that represent the interactions between the tip and functionalized Si surface. Agreement between predicted and measured force profiles was taken to imply that the traction-separation relations have been properly extracted. Scale up to larger contact areas was considered by forming Si/SAM/Si sandwiches and then separating them via fracture experiments. The mode 1 traction-separation relations have been extracted using fracture mechanics concepts under mode 1 and mixed-mode conditions. Interesting differences were noted between the three sets of traction-separation relations.

  3. A new ion sensing deep atomic force microscope

    SciTech Connect (OSTI)

    Drake, Barney; Randall, Connor; Bridges, Daniel; Hansma, Paul K.

    2014-08-15

    Here we describe a new deep atomic force microscope (AFM) capable of ion sensing. A novel probe assembly incorporates a micropipette that can be used both for sensing ion currents and as the tip for AFM imaging. The key advance of this instrument over previous ion sensing AFMs is that it uses conventional micropipettes in a novel suspension system. This paper focuses on sensing the ion current passively while using force feedback for the operation of the AFM in contact mode. Two images are obtained simultaneously: (1) an AFM topography image and (2) an ion current image. As an example, two images of a MEMS device with a microchannel show peaks in the ion current as the pipette tip goes over the edges of the channel. This ion sensing AFM can also be used in other modes including tapping mode with force feedback as well as in non-contact mode by utilizing the ion current for feedback, as in scanning ion conductance microscopy. The instrument is gentle enough to be used on some biological samples such as plant leaves.

  4. Ponderomotive force in the presence of electric fields

    SciTech Connect (OSTI)

    Khazanov, G. V.; Krivorutsky, E. N.

    2013-02-15

    This paper presents averaged equations of particle motion in an electromagnetic wave of arbitrary frequency with its wave vector directed along the ambient magnetic field. The particle is also subjected to an E(vector sign) Multiplication-Sign B(vector sign) drift and a background electric field slowly changing in space and acting along the magnetic field line. The fields, wave amplitude, and the wave vector depend on the coordinate along the magnetic field line. The derivations of the ponderomotive forces are done by assuming that the drift velocity in the ambient magnetic field is comparable to the particle velocity. Such a scenario leads to new ponderomotive forces, dependent on the wave magnetic field intensity, and, as a result, to the additional energy exchange between the wave and the plasma particles. It is found that the parallel electric field can lead to the change of the particle-wave energy exchange rate comparable to that produced by the previously discussed ponderomotive forces.

  5. Secondary structure of rat and human amylin across force fields

    SciTech Connect (OSTI)

    Hoffmann, Kyle Quynn; McGovern, Michael; Chiu, Chi -cheng; de Pablo, Juan J.; Paci, Emanuele

    2015-07-29

    The aggregation of human amylin has been strongly implicated in the progression of Type II diabetes. This 37-residue peptide forms a variety of secondary structures, including random coils, α-helices, and β-hairpins. The balance between these structures depends on the chemical environment, making amylin an ideal candidate to examine inherent biases in force fields. Rat amylin differs from human amylin by only 6 residues; however, it does not form fibrils. Therefore it provides a useful complement to human amylin in studies of the key events along the aggregation pathway. In this work, the free energy of rat and human amylin was determined as a function of α-helix and β-hairpin content for the Gromos96 53a6, OPLS-AA/L, CHARMM22/CMAP, CHARMM22*, Amberff99sb*-ILDN, and Amberff03w force fields using advanced sampling techniques, specifically bias exchange metadynamics. This work represents a first systematic attempt to evaluate the conformations and the corresponding free energy of a large, clinically relevant disordered peptide in solution across force fields. The NMR chemical shifts of rIAPP were calculated for each of the force fields using their respective free energy maps, allowing us to quantitatively assess their predictions. We show that the predicted distribution of secondary structures is sensitive to the choice of force-field: Gromos53a6 is biased towards β-hairpins, while CHARMM22/CMAP predicts structures that are overly α-helical. OPLS-AA/L favors disordered structures. Amberff99sb*-ILDN, AmberFF03w and CHARMM22* provide the balance between secondary structures that is most consistent with available experimental data. In contrast to previous reports, our findings suggest that the equilibrium conformations of human and rat amylin are remarkably similar, but that subtle differences arise in transient alpha-helical and beta-strand containing structures that the human peptide can more readily adopt. We hypothesize that these transient states enable dynamic pathways that facilitate the formation of aggregates and, eventually, amyloid fibrils.

  6. Secondary structure of rat and human amylin across force fields

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hoffmann, Kyle Quynn; McGovern, Michael; Chiu, Chi -cheng; de Pablo, Juan J.; Paci, Emanuele

    2015-07-29

    The aggregation of human amylin has been strongly implicated in the progression of Type II diabetes. This 37-residue peptide forms a variety of secondary structures, including random coils, α-helices, and β-hairpins. The balance between these structures depends on the chemical environment, making amylin an ideal candidate to examine inherent biases in force fields. Rat amylin differs from human amylin by only 6 residues; however, it does not form fibrils. Therefore it provides a useful complement to human amylin in studies of the key events along the aggregation pathway. In this work, the free energy of rat and human amylin wasmore » determined as a function of α-helix and β-hairpin content for the Gromos96 53a6, OPLS-AA/L, CHARMM22/CMAP, CHARMM22*, Amberff99sb*-ILDN, and Amberff03w force fields using advanced sampling techniques, specifically bias exchange metadynamics. This work represents a first systematic attempt to evaluate the conformations and the corresponding free energy of a large, clinically relevant disordered peptide in solution across force fields. The NMR chemical shifts of rIAPP were calculated for each of the force fields using their respective free energy maps, allowing us to quantitatively assess their predictions. We show that the predicted distribution of secondary structures is sensitive to the choice of force-field: Gromos53a6 is biased towards β-hairpins, while CHARMM22/CMAP predicts structures that are overly α-helical. OPLS-AA/L favors disordered structures. Amberff99sb*-ILDN, AmberFF03w and CHARMM22* provide the balance between secondary structures that is most consistent with available experimental data. In contrast to previous reports, our findings suggest that the equilibrium conformations of human and rat amylin are remarkably similar, but that subtle differences arise in transient alpha-helical and beta-strand containing structures that the human peptide can more readily adopt. We hypothesize that these transient states enable dynamic pathways that facilitate the formation of aggregates and, eventually, amyloid fibrils.« less

  7. Entanglement entropy of two black holes and entanglement entropic force

    SciTech Connect (OSTI)

    Shiba, Noburo

    2011-03-15

    We study the entanglement entropy S{sub C} of the massless free scalar field on the outside region C of two black holes A and B whose radii are R{sub 1} and R{sub 2} and how it depends on the distance r(>>R{sub 1},R{sub 2}) between two black holes. If we can consider the entanglement entropy as thermodynamic entropy, we can see the entropic force acting on the two black holes from the r dependence of S{sub C}. We develop the computational method based on that of Bombelli et al. to obtain the r dependence of S{sub C} of scalar fields whose Lagrangian is quadratic with respect to the scalar fields. First, we study S{sub C} in (d+1)-dimensional Minkowski spacetime. In this case the state of the massless free scalar field is the Minkowski vacuum state, and we replace two black holes by two imaginary spheres and take the trace over the degrees of freedom residing in the imaginary spheres. We obtain the leading term of S{sub C} with respect to 1/r. The result is S{sub C}=S{sub A}+S{sub B}+(1/r{sup 2d-2})G(R{sub 1},R{sub 2}), where S{sub A} and S{sub B} are the entanglement entropy on the inside region of A and B, respectively, and G(R{sub 1},R{sub 2}){<=}0. We do not calculate G(R{sub 1},R{sub 2}) in detail, but we show how to calculate it. In the black hole case we use the method used in the Minkowski spacetime case with some modifications. We show that S{sub C} can be expected to be the same form as that in the Minkowski spacetime case. But in the black hole case, S{sub A} and S{sub B} depend on r, so we do not fully obtain the r dependence of S{sub C}. Finally, we assume that the entanglement entropy can be regarded as thermodynamic entropy and consider the entropic force acting on two black holes. We argue how to separate the entanglement entropic force from other forces and how to cancel S{sub A} and S{sub B} whose r dependences are not obtained. Then we obtain the physical prediction, which can be tested experimentally in principle.

  8. Nuclear Forces from Lattice Quantum Chromodynamics Martin J. Savage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forces from Lattice Quantum Chromodynamics Martin J. Savage Institute for Nuclear Theory Large Scale Computing and Storage Requirements for Nuclear Physics (NP): Target 2017 April 2014 1 Monday, April 28, 2014 Solve QCD From QCD to Nuclei 2 FRIB Lattice QCD Monday, April 28, 2014 Core-Collapse Supernova Black-Hole or Neutron Star ? SN1987a (Mezzacappa et al) Y n n K Nuclear EoS n n n Monday, April 28, 2014 Spin-pairing Shell-structure Vibrational and rotational excitations Λ QCD m u Λ QCD m d

  9. Uranyl-Peroxide Nanocapsules in Aqueous Solution: Force Field Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and First Applications | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Uranyl-Peroxide Nanocapsules in Aqueous Solution: Force Field Development and First Applications Previous Next List Pere Miró, Bess Vlaisavljevich, Allison L. Dzubak, Shuxian Hu, Peter C. Burns, Christopher J. Cramer, Riccardo Spezia, and Laura Gagliardi, J. Phys. Chem. C, 118, 24730-24740 (2014) DOI: 10.1021/jp504147s jp-2014-04147s_0009 Abstract: The self-assembly of uranyl-peroxide

  10. The cooperative monitoring of military forces: An exercise in strategy

    SciTech Connect (OSTI)

    1998-04-01

    This exercise examines a hypothetical security problem associated with conventional military forces and border security: a surprise attack. The goal of the exercise is to provide an opportunity to think about how cooperative monitoring can be part of regional security. Two hypothetical countries, VOLCANOES and MOUNTAINS, have been created for this exercise based on the US states of Arizona and New Mexico. They were selected for their size and variety of terrain. Hypothetical background information and characteristics of the two countries are provided. An outline of activities is given, including prioritization of security concerns and monitoring of objectives for security concerns. 6 tabs.

  11. A Reactive Force Field study of Li/C Systems for Electrical Energy...

    Office of Scientific and Technical Information (OSTI)

    Reactive Force Field study of LiC Systems for Electrical Energy Storage Citation Details In-Document Search Title: A Reactive Force Field study of LiC Systems for Electrical...

  12. Development of a quartz tuning-fork-based force sensor for measurements in the tens of nanoNewton force range during nanomanipulation experiments

    SciTech Connect (OSTI)

    Oiko, V. T. A. Rodrigues, V.; Ugarte, D.; Martins, B. V. C.; Silva, P. C.

    2014-03-15

    Understanding the mechanical properties of nanoscale systems requires new experimental and theoretical tools. In particular, force sensors compatible with nanomechanical testing experiments and with sensitivity in the nN range are required. Here, we report the development and testing of a tuning-fork-based force sensor for in situ nanomanipulation experiments inside a scanning electron microscope. The sensor uses a very simple design for the electronics and it allows the direct and quantitative force measurement in the 1100 nN force range. The sensor response is initially calibrated against a nN range force standard, as, for example, a calibrated Atomic Force Microscopy cantilever; subsequently, applied force values can be directly derived using only the electric signals generated by the tuning fork. Using a homemade nanomanipulator, the quantitative force sensor has been used to analyze the mechanical deformation of multi-walled carbon nanotube bundles, where we analyzed forces in the 540 nN range, measured with an error bar of a few nN.

  13. Development of Integrated ASR Model Forcing Data and Their Applications to

    Office of Scientific and Technical Information (OSTI)

    Improve CAM (Technical Report) | SciTech Connect Technical Report: Development of Integrated ASR Model Forcing Data and Their Applications to Improve CAM Citation Details In-Document Search Title: Development of Integrated ASR Model Forcing Data and Their Applications to Improve CAM In this project, we have (1) improved the constrained variational analysis algorithm of ARM model forcing data, and (2) used the ARM forcing data to identify systematic biases in clouds and radiation in the CAM5

  14. The Secretary of Energy Advisory Board (SEAB) Task Force on Methane

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrates | Department of Energy Methane Hydrates The Secretary of Energy Advisory Board (SEAB) Task Force on Methane Hydrates The Secretary of Energy Advisory Board (SEAB) Task Force on Methane Hydrates is composed of SEAB members and independent experts charged with recommending a framework for DOE methane hydrate research programs. Purpose of the Task Force: The purpose of this task force is to provide a framework for DOE's pre-commercial methane hydrate research effort, in particular, the

  15. Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development | Department of Energy Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology Development Secretary of Energy Advisory Board (SEAB) Task Force on EM Technology Development Presentation from the 2015 DOE National Cleanup Workshop by Gerald Boyd, Vice President, Stoller Newport News Nuclear; Task Force Member. PDF icon SEAB Task Force on EM Technology Development More Documents & Publications Enabling Innovation in Our Mission PRESENTATION: OVERVIEW OF DOE OFFICE

  16. U.S. Air Force Energy Program Presentation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Air Force Energy Program Presentation U.S. Air Force Energy Program Presentation Omar Mendoza, U.S. Air Force, presentation on the U.S. Air Force Energy Program at the Advanced Biofuels Industry Roundtable. PDF icon 6_mendoza_roundtable.pdf More Documents & Publications Advanced Biofuels Industry Roundtable - List of Participants Advanced Drop-In Biofuels Initiative Agenda Report of the DOE-DOE Workshop on Fuel Cells in Aviation: Workshop Summary and Action Plan

  17. THE EMPLOYEE'S GUIDE TO BENEFITS FOR THOSE AFFECTED BY REDUCTION IN FORCE

    Energy Savers [EERE]

    EMPLOYEE'S THE EMPLOYEE'S THE EMPLOYEE'S THE EMPLOYEE'S GUIDE TO BENEFITS GUIDE TO BENEFITS GUIDE TO BENEFITS GUIDE TO BENEFITS FOR THOSE FOR THOSE FOR THOSE FOR THOSE AFFECTED BY AFFECTED BY AFFECTED BY AFFECTED BY REDUCTION IN REDUCTION IN REDUCTION IN REDUCTION IN FORCE FORCE FORCE FORCE U.S. OFFICE OF U.S. OFFICE OF U.S. OFFICE OF U.S. OFFICE OF PERSONNEL MANAGEMENT PERSONNEL MANAGEMENT PERSONNEL MANAGEMENT PERSONNEL MANAGEMENT WORKFORCE WORKFORCE WORKFORCE WORKFORCE RESTRUCTURING OFFICE

  18. Sandia-Power Surety Task Force Hawaii foam analysis.

    SciTech Connect (OSTI)

    McIntyre, Annie

    2010-11-01

    The Office of Secretary of Defense (OSD) Power Surety Task Force was officially created in early 2008, after nearly two years of work in demand reduction and renewable energy technologies to support the Warfighter in Theater. The OSD Power Surety Task Force is tasked with identifying efficient energy solutions that support mission requirements. Spray foam insulation demonstrations were recently expanded beyond field structures to include military housing at Ft. Belvoir. Initial results to using the foam in both applications are favorable. This project will address the remaining key questions: (1) Can this technology help to reduce utility costs for the Installation Commander? (2) Is the foam cost effective? (3) What application differences in housing affect those key metrics? The critical need for energy solutions in Hawaii and the existing relationships among Sandia, the Department of Defense (DOD), the Department of Energy (DOE), and Forest City, make this location a logical choice for a foam demonstration. This project includes application and analysis of foam to a residential duplex at the Waikulu military community on Oahu, Hawaii, as well as reference to spray foam applied to a PACOM facility and additional foamed units on Maui, conducted during this project phase. This report concludes the analysis and describes the utilization of foam insulation at military housing in Hawaii and the subsequent data gathering and analysis.

  19. Non-Kyoto Radiative Forcing in Long-Run Greenhouse Gas Emissions and Climate Change Scenarios

    SciTech Connect (OSTI)

    Rose, Steven K.; Richels, Richard G.; Smith, Steven J.; Riahi, Keywan; Stefler, Jessica; Van Vuuren, Detlef

    2014-04-27

    Climate policies designed to achieve climate change objectives must consider radiative forcing from the Kyoto greenhouse gas, as well as other forcing constituents, such as aerosols and tropospheric ozone. Net positive forcing leads to global average temperature increases. Modeling of non-Kyoto forcing is a relatively new component of climate management scenarios. Five of the nineteen models in the EMF-27 Study model both Kyoto and non-Kyoto forcing. This paper describes and assesses current non-Kyoto radiative forcing modeling within these integrated assessment models. The study finds negative forcing from aerosols masking significant positive forcing in reference non-climate policy projections. There are however large differences across models in projected non-Kyoto emissions and forcing, with differences stemming from differences in relationships between Kyoto and non-Kyoto emissions and fundamental differences in modeling structure and assumptions. Air pollution and non-Kyoto forcing decline in the climate policy scenarios. However, non-Kyoto forcing appears to be influencing mitigation results, including allowable carbon dioxide emissions, and further evaluation is merited. Overall, there is substantial uncertainty related to non-Kyoto forcing that must be considered.

  20. Temperature evolution of electromotive force from Pt on yttrium-iron-garnet under ferromagnetic resonance

    SciTech Connect (OSTI)

    Ohshima, Ryo; Emoto, Hiroyuki; Shinjo, Teruya; Ando, Yuichiro; Shiraishi, Masashi

    2015-05-07

    Temperature evolution of electromotive force from Pt due to the inverse spin Hall effect is studied. Pure spin current is injected from yttrium-iron-garnet by using spin pumping technique. The electromotive force from the Pt monotonically decreases with decreasing temperature, and it is showed that there is a deviation between the measured and the calculated electromotive forces.

  1. Laboratory measurement verification of laser hazard analysis for miles weapon simulators used in force on force exercises.

    SciTech Connect (OSTI)

    Augustoni, Arnold L.

    2006-08-01

    Due to the change in the batteries used with the Small Arm Laser Transmitters (SALT) from 3-volts dc to 3.6-volts dc and changes to SNL MILES operating conditions, the associated laser hazards of these units required re-evaluation to ensure that the hazard classification of the laser emitters had not changed as well. The output laser emissions of the SNL MILES, weapon simulators and empire guns, used in Force-On-Force (FOF) training exercises, was measured in accordance to the ANSI Standard Z136.4-2005, ''Recommended Practice for Laser Safety Measurements for Hazard Evaluation''. The laser hazard class was evaluated in accordance with the ANSI Standard Z136.1-2000, ''Safe Use of Lasers'', using ''worst'' case conditions associated with these MILES units. Laser safety assessment was conducted in accordance with the ANSI Standard Z136.6-2005, ''Safe Use of Lasers Outdoors''. The laser hazard evaluation of these MILES laser emitters was compared to and supersedes SAND Report SAND2002-0246, ''Laser Safety Evaluation of the MILES and Mini MILES Laser Emitting Components'', which used ''actual'' operating conditions of the laser emitters at the time of its issuance.

  2. Global Distribution and Climate Forcing of Marine Organic Aerosol - Part 2: Effects on Cloud Properties and Radiative Forcing

    SciTech Connect (OSTI)

    Gantt, Brett; Xu, Jun; Meskhidze, N.; Zhang, Yang; Nenes, Athanasios; Ghan, Steven J.; Liu, Xiaohong; Easter, Richard C.; Zaveri, Rahul A.

    2012-07-25

    A series of simulations with the Community Atmosphere Model version 5 (CAM5) with a 7-mode Modal Aerosol Model were conducted to assess the changes in cloud microphysical properties and radiative forcing resulting from marine organic aerosols. Model simulations show that the anthropogenic aerosol indirect forcing (AIF) predicted by CAM5 is decreased in absolute magnitude by up to 0.09 Wm{sup -2} (7 %) when marine organic aerosols are included. Changes in the AIF from marine organic aerosols are associated with small global increases in low-level incloud droplet number concentration and liquid water path of 1.3 cm{sup -3} (1.5 %) and 0.22 gm{sup -2} (0.5 %), respectively. Areas especially sensitive to changes in cloud properties due to marine organic aerosol include the Southern Ocean, North Pacific Ocean, and North Atlantic Ocean, all of which are characterized by high marine organic emission rates. As climate models are particularly sensitive to the background aerosol concentration, this small but non-negligible change in the AIF due to marine organic aerosols provides a notable link for ocean-ecosystem marine low-level cloud interactions and may be a candidate for consideration in future earth system models.

  3. Molecular dynamics simulations of methane hydrate using polarizable force fields

    SciTech Connect (OSTI)

    Jiang, H.N.; Jordan, K.D.; Taylor, C.E.

    2007-03-01

    Molecular dynamics simulations of methane hydrate have been carried out using the AMOEBA and COS/G2 polarizable force fields. Properties examined include the temperature dependence of the lattice constant, the OC and OO radial distribution functions and the vibrational spectra. Both the AMOEBA and COS/G2 models are found to successfully account for the available experimental data, with overall slightly better agreement with experiment being found for the AMOEBA model. Several properties calculated using the AMOEBA and COS/G2 models differ appreciable from the corresponding results obtained previously using the polarizable TIP4P-FQ model. This appears to be due to the inadequacy of the treatment of polarization, especially, the restriction of polarization to in-plane only, in the TIP4P-FQ model.

  4. Technology requirements for high-power Lithium Lorentz Force accelerators

    SciTech Connect (OSTI)

    Polk, J.; Frisbee, R.; Krauthamer, S.; Tikhonov, V.; Semenikhin, S.; Kim, V.

    1997-01-01

    Lithium Lorentz Force Accelerators (LFA{close_quote}s) are capable of processing very high power levels and are therefore applicable to a wide range of challenging missions. An analysis of a reusable orbit transfer vehicle with a solar or nuclear electric power source was performed to assess the applicability of high-power LFA{close_quote}s to this mission and to define engine performance and lifetime goals to help guide the technology development program. For this class of missions, the emphasis must be on achieving high efficiency at an Isp of 4000{endash}5000 s at power levels of 200{endash}250 kWe. The engines must demonstrate very reliable operation for a service life of about 3000 hours. These goals appear to be achievable with engine technologies currently under development. {copyright} {ital 1997 American Institute of Physics.}

  5. Annual training manual for security training: Protective force

    SciTech Connect (OSTI)

    Not Available

    1990-10-01

    Westinghouse is committed to high quality training relevant to the need of the Protective Forces at the Waste Isolation Pilot Plant (WIPP). The training programs at WIPP are designed to qualify Security personnel to perform WIPP security missions in a professional and responsible manner. The program consists of basic as well as sustainment training, as further described in this plan. This plan documents the WIPP Security training program for security personnel for calendar year 1990. The programs detailed in this plan are designed to adequately train persons to ensure the uninterrupted continuity of Department of Energy (DOE)/Westinghouse operations. The Security Training Program consists of four basic elements. These elements are (1) basic level training; (2) on-the-job training; (3) refresher training; and (4) in-service training.

  6. An Electromotive Force Measurement System for Alloy Fuels

    SciTech Connect (OSTI)

    Changhu Xing; Colby Jensen; Heng Ban; Robert Mariani; J. Rory Kennedy

    2010-11-01

    The development of advanced nuclear fuels requires a better understanding of the transmutation and micro-structural evolution of the materials. Alloy fuels have the advantage of high thermal conductivity and improved characteristics in fuel-cladding chemical reaction. However, information on thermodynamic and thermophysical properties is limited. The objective of this project is to design and build an experimental system to measure the thermodynamic properties of solid materials from which the understanding of their phase change can be determined. The apparatus was used to measure the electromotive force (EMF) of several materials in order to calibrate and test the system. The EMF of chromel was measured from 100C to 800C and compared with theoretical values. Additionally, the EMF measurement of Ni-Fe alloy was performed and compared with the Ni-Fe phase diagram. The prototype system is to be modified eventually and used in a radioactive hot-cell in the future.

  7. Lieb-Liniger gas in a constant-force potential

    SciTech Connect (OSTI)

    Jukic, D.; Galic, S.; Buljan, H.; Pezer, R.

    2010-08-15

    We use Gaudin's Fermi-Bose mapping operator to calculate exact solutions for the Lieb-Liniger model in a linear (constant-force) potential (the constructed exact stationary solutions are referred to as the Lieb-Liniger-Airy wave functions). The ground-state properties of the gas in the wedgelike trapping potential are calculated in the strongly interacting regime by using Girardeau's Fermi-Bose mapping and the pseudopotential approach in the 1/c approximation (c denotes the strength of the interaction). We point out that quantum dynamics of Lieb-Liniger wave packets in the linear potential can be calculated by employing an N-dimensional Fourier transform as in the case of free expansion.

  8. [DRAFT] DECLARATION OF BEST PRACTICES FOR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    be, and shall appear to be, free from interference in the legitimate performance of their duties. This independence is achieved primarily through organizational recognition,...

  9. Declaration of International Partnership for Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    G8, The People's Republic of China, India and The Republic of Korea Joint Statement by Energy Ministers of G8, The People's Republic of China, India and The Republic of Korea (June ...

  10. Force measuring valve assemblies, systems including such valve assemblies and related methods

    DOE Patents [OSTI]

    DeWall, Kevin George (Pocatello, ID); Garcia, Humberto Enrique (Idaho Falls, ID); McKellar, Michael George (Idaho Falls, ID)

    2012-04-17

    Methods of evaluating a fluid condition may include stroking a valve member and measuring a force acting on the valve member during the stroke. Methods of evaluating a fluid condition may include measuring a force acting on a valve member in the presence of fluid flow over a period of time and evaluating at least one of the frequency of changes in the measured force over the period of time and the magnitude of the changes in the measured force over the period of time to identify the presence of an anomaly in a fluid flow and, optionally, its estimated location. Methods of evaluating a valve condition may include directing a fluid flow through a valve while stroking a valve member, measuring a force acting on the valve member during the stroke, and comparing the measured force to a reference force. Valve assemblies and related systems are also disclosed.

  11. GravitoMagnetic force in modified Newtonian dynamics

    SciTech Connect (OSTI)

    Exirifard, Qasem

    2013-08-01

    We introduce the Gauge Vector-Tensor (GVT) theory by extending the AQUAL's approach to the GravitoElectroMagnetism (GEM) approximation of gravity. GVT is a generally covariant theory of gravity composed of a pseudo Riemannian metric and two U(1) gauge connections that reproduces MOND in the limit of very weak gravitational fields while remains consistent with the Einstein-Hilbert gravity in the limit of strong and Newtonian gravitational fields. GVT also provides a simple framework to study the GEM approximation to gravity. We illustrate that the gravitomagnetic force at the edge of a galaxy can be in accord with either GVT or ?CDM but not both. We also study the physics of the GVT theory around the gravitational saddle point of the Sun and Jupiter system. We notice that the conclusive refusal of the GVT theory demands measuring either both of the gravitoelectric and gravitomagnetic fields inside the Sun-Jupiter MOND window, or the gravitoelectric field inside two different solar GVT MOND windows. The GVT theory, however, will be favored by observing an anomaly in the gravitoelectric field inside a single MOND window.

  12. Government Applications Task Force ground truth study of WAG 4

    SciTech Connect (OSTI)

    Evers, T.K.; Smyre, J.L.; King, A.L.

    1997-06-01

    This report documents the Government Applications Task Force (GATF) Buried Waste Project. The project was initiated as a field investigation and verification of the 1994 Strategic Environmental Research and Development Program`s (SERDP) Buried Waste Identification Project results. The GATF project team included staff from three US Department of Energy (DOE) Laboratories [Oak Ridge National Laboratory (ORNL), Los Alamos National Laboratory (LANL), and the Savannah River Technology Center (SRTC)] and from the National Exploitation Laboratory. Similar studies were conducted at each of the three DOE laboratories to demonstrate the effective use of remote sensing technologies. The three locations were selected to assess differences in buried waste signatures under various environmental conditions (i.e., climate, terrain, precipitation, geology, etc.). After a brief background discussion of the SERDP Project, this report documents the field investigation (ground truth) results from the 1994--1995 GATF Buried Waste Study at ORNL`s Waste Area Grouping (WAG) 4. Figures for this report are located in Appendix A.

  13. GCM parameterization of radiative forcing by Pinatubo aerosols

    SciTech Connect (OSTI)

    Lacis, A.A.; Mishchenko, M.I.

    1996-12-31

    This paper addresses the question of whether the general circulation model (GCM) parameterization of volcanic aerosol forcing can be adequately described in terms of just two physical aerosol parameters: (1) the aerosol column optical thickness and (2) the effective radius of the aerosol size distribution. Data recorded from the eruption of Mt. Pinatubo in the Philippines in June 1991 was analyzed to attempt to answer this question. The spatial distribution of the particle size showed considerable variability and was found to increase steadily following the eruption. The time evolution of the Pinatubo aerosol particle size distribution as derived from satellite data differed significantly, particularly in the early phases of the eruption, from that assumed in the initial GCM simulation of the Pinatubo eruption. A bimodal distribution was used to examine the possibility that the actual size distribution of the volcanic aerosol was multimodal. However, results suggested that in most cases the aerosol size distribution was essentially monomodal in nature. Results from the radiative model used in the calculations are also presented. 11 refs., 6 figs.

  14. Atomic force microscopy investigation of the giant mimivirus

    SciTech Connect (OSTI)

    Kuznetsov, Yuri G.; Xiao Chuan; Sun Siyang; Raoult, Didier; Rossmann, Michael; McPherson, Alexander

    2010-08-15

    Mimivirus was investigated by atomic force microscopy in its native state following serial degradation by lysozyme and bromelain. The 750-nm diameter virus is coated with a forest of glycosylated protein fibers of lengths about 140 nm with diameters 1.4 nm. Fibers are capped with distinctive ellipsoidal protein heads of estimated Mr = 25 kDa. The surface fibers are attached to the particle through a layer of protein covering the capsid, which is in turn composed of the major capsid protein (MCP). The latter is organized as an open network of hexagonal rings with central depressions separated by 14 nm. The virion exhibits an elaborate apparatus at a unique vertex, visible as a star shaped depression on native particles, but on defibered virions as five arms of 50 nm width and 250 nm length rising above the capsid by 20 nm. The apparatus is integrated into the capsid and not applied atop the icosahedral lattice. Prior to DNA release, the arms of the star disengage from the virion and it opens by folding back five adjacent triangular faces. A membrane sac containing the DNA emerges from the capsid in preparation for fusion with a membrane of the host cell. Also observed from disrupted virions were masses of distinctive fibers of diameter about 1 nm, and having a 7-nm periodicity. These are probably contained within the capsid along with the DNA bearing sac. The fibers were occasionally observed associated with toroidal protein clusters interpreted as processive enzymes modifying the fibers.

  15. The parallel approach to force/position control of robotic manipulators

    SciTech Connect (OSTI)

    Chiaverini, S.; Sciavicco, L.

    1993-08-01

    Force/position control strategies provide an effective framework to deal with tasks involving interaction with the environment. In this paper the parallel approach to force/position control of robotic manipulators is presented. It allows a complete use of the available sensor measurements by operating the control action in a full-dimensional space without using selection matrices. Conflicting situations between the position and force tasks are managed using a priority strategy: the force control loop is designed to prevail over the position control loop. This choice ensures limited deviations from the prescribed force trajectory in every situation, guaranteeing automatic recovery from unplanned collisions. A dynamic force/position parallel control law is presented and its performance in presence of an elastic environment is analyzed; simplification of the dynamic control law is also discussed leading to a PID-type parallel controller. Two case studies are worked out that show the effectiveness of the approach in application to an industrial robot.

  16. Government and Industry A Force for Collaboration at the Energy Roadmap

    Energy Savers [EERE]

    Update Workshop | Department of Energy Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop Roadmap to Secure Control Systems in the Energy Sector PDF icon Government and Industry A Force for Collaboration at the Energy Roadmap Update Workshop More Documents & Publications First-ever ieRoadmap Workshop Reviews Progress in Achieving Roadmap Goals Security is Not an

  17. Customized atomic force microscopy probe by focused-ion-beam-assisted tip

    Office of Scientific and Technical Information (OSTI)

    transfer (Journal Article) | SciTech Connect Customized atomic force microscopy probe by focused-ion-beam-assisted tip transfer Citation Details In-Document Search Title: Customized atomic force microscopy probe by focused-ion-beam-assisted tip transfer We present a technique for transferring separately fabricated tips onto tipless atomic force microscopy (AFM) cantilevers, performed using focused ion beam-assisted nanomanipulation. This method addresses the need in scanning probe microscopy

  18. Temperature evolution of electromotive force from Pt on yttrium-iron-garnet

    Office of Scientific and Technical Information (OSTI)

    under ferromagnetic resonance (Journal Article) | SciTech Connect Temperature evolution of electromotive force from Pt on yttrium-iron-garnet under ferromagnetic resonance Citation Details In-Document Search Title: Temperature evolution of electromotive force from Pt on yttrium-iron-garnet under ferromagnetic resonance Temperature evolution of electromotive force from Pt due to the inverse spin Hall effect is studied. Pure spin current is injected from yttrium-iron-garnet by using spin

  19. A Physically-Based Estimate of Radiative Forcing by Anthropogenic Sulfate

    Office of Scientific and Technical Information (OSTI)

    Aerosol (Journal Article) | SciTech Connect A Physically-Based Estimate of Radiative Forcing by Anthropogenic Sulfate Aerosol Citation Details In-Document Search Title: A Physically-Based Estimate of Radiative Forcing by Anthropogenic Sulfate Aerosol Estimates of direct and indirect radiative forcing by anthropogenic sulfate aerosols from an integrated global aerosol and climate modeling system are presented. A detailed global tropospheric chemistry and aerosol model that predicts

  20. A scanning force microscopy study on the drawing of solution crystallized

    Office of Scientific and Technical Information (OSTI)

    UHMW-PE (Conference) | SciTech Connect Conference: A scanning force microscopy study on the drawing of solution crystallized UHMW-PE Citation Details In-Document Search Title: A scanning force microscopy study on the drawing of solution crystallized UHMW-PE Drawing of solution crystallized UHMW-PE has been monitored by scanning force microscopy (SFM). The work is focused on the transformation of lamellae to fibrilla crystals within the necking region ({lambda} = 1-10). SFM allows

  1. Calibration of an interfacial force microscope for MEMS metrology : FY08-09

    Office of Scientific and Technical Information (OSTI)

    activities. (Technical Report) | SciTech Connect Calibration of an interfacial force microscope for MEMS metrology : FY08-09 activities. Citation Details In-Document Search Title: Calibration of an interfacial force microscope for MEMS metrology : FY08-09 activities. Progress in MEMS fabrication has enabled a wide variety of force and displacement sensing devices to be constructed. One device under intense development at Sandia is a passive shock switch, described elsewhere (Mitchell 2008).

  2. THE SECRETARY OF ENERGY ADVISORY BOARD (SEAB) TASK FORCE ON BIOMEDICAL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SCIENCES | Department of Energy THE SECRETARY OF ENERGY ADVISORY BOARD (SEAB) TASK FORCE ON BIOMEDICAL SCIENCES THE SECRETARY OF ENERGY ADVISORY BOARD (SEAB) TASK FORCE ON BIOMEDICAL SCIENCES The Secretary of Energy Advisory Board (SEAB) Task Force on Biomedical Sciences is comprised of SEAB members and experts from, for example, universities, the NIH intramural program, DOE National Laboratories, and various components of industry, and charged with identifying new areas for research by DOE

  3. Streamlining the Nuclear Force | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Streamlining the Nuclear Force Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: Email Us More Information » 05.01.14 Streamlining the Nuclear Force An optimized nuclear force model yields a

  4. July 15, 2014 SEAB Task Force Meeting on Technology Development for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environmental Management | Department of Energy July 15, 2014 SEAB Task Force Meeting on Technology Development for Environmental Management July 15, 2014 SEAB Task Force Meeting on Technology Development for Environmental Management July 15, 2014 - 2:24pm Addthis SECRETARY OF ENERGY ADVISORY BOARD TASK FORCE MEETING ON TECHNOLOGY DEVELOPMENT FOR ENVIRONMENTAL MANAGEMENT U.S. Department of Energy 1000 Independence Avenue SW Washington, DC Room 1E-245 July 15, 2014 AGENDA Opening Remarks by

  5. Report of the Task Force on Methane Hydrates | Department of Energy

    Energy Savers [EERE]

    Methane Hydrates Report of the Task Force on Methane Hydrates This report presents the findings and recommendations for the Secretary of Energy Advisory Board (SEAB) Task Force on Methane Hydrates. The Task Force was charged to review the U.S. Department of Energy's (DOE's) methane hydrates research program to evaluate the program's pre-commercial research activities and progress in (1) understanding the assessment and exploitation of hydrates as an energy resource, and (2) understanding the

  6. Report of the Task Force on Next Generation High Performance Computing |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Next Generation High Performance Computing Report of the Task Force on Next Generation High Performance Computing The SEAB Task Force on Next Generation High Performance Computing (TFHPC) was established by the Secretary of Energy on December 20, 2014 to review the mission and national capabilities related to next generation high performance computing. The Task Force's findings and recommendations are framed by three broad considerations including a "new"

  7. Report of the Task Force on Nuclear Nonproliferation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nuclear Nonproliferation Report of the Task Force on Nuclear Nonproliferation The Secretary of Energy on December 20, 2013 established the Secretary of Energy Advisory Board (SEAB) Task Force on Nuclear Nonproliferation (TFNN) and charged the Task Force to advise the DOE on future areas of emphasis for its nuclear nonproliferation activities. This Final Report addresses each element of the charge: assessing the emerging threat landscape and what should be done to meet it, examining DOE's current

  8. Interim Report of the Task Force on DOE National Laboratories | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy DOE National Laboratories Interim Report of the Task Force on DOE National Laboratories The SEAB Task Force on DOE National Laboratories was established by the Secretary of Energy on June 16, 2014, to provide advice, guidance, and recommendations on important issues related to improving the health and management of the labs. The Task Force has been charged to review past studies, Congressional reports and direction, and Departmental deliberations to identify key areas that have

  9. Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy

    Office of Environmental Management (EM)

    Goals | Department of Energy Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Federal Energy Management Program case study focuses on Patrick Air Force Base's use of a utility energy services contract to achieve its energy goals. PDF icon uesc_casestudy_pafb.pdf More Documents & Publications FPL Energy Services ESCO Qualification Sheet UESC Project Overview: NASA Ames

  10. Long distance symmetries for nuclear forces and the similarity renormalization group

    SciTech Connect (OSTI)

    Szpigel, S.; Timoteo, V. S.; Arriola, E. R.

    2013-03-25

    In this work we study the emergence of long distance symmetries for nuclear forces within the framework of the similarity renormalization group approach.

  11. FY 2017 Budget Hearing Before the House Armed Services Subcommittee on Strategic Forces

    Broader source: Energy.gov [DOE]

    NNSA and EM FY 2017 Budget Hearing Before the House Armed Services Subcommittee on Strategic Forces. Testimony of Monica Regalbuto, Assistant Secretary for Environmental Management.

  12. FY 2017 Budget Hearing Before the Senate Armed Services Subcommittee on Strategic Forces

    Broader source: Energy.gov [DOE]

    NNSA and EM FY 2017 Budget Hearing Before the Senate Armed Services Subcommittee on Strategic Forces. Testimony of Monica Regalbuto, Assistant Secretary for Environmental Management.

  13. A simple model simulating a fan as a source of axial and circumferential body forces

    Energy Science and Technology Software Center (OSTI)

    2002-07-01

    This software can be used in a computational fluids dynamics (CFD) code to represent a fan as a source of axial and circumferential body forces. The combined software can be used effectively in car design analyses that involve many underhood thermal management simulations. FANMOD uses as input the rotational speed of the fan, geometric fan data, and the lift and drag coefficients of the blades, and predicts the body forces generated by the fan inmore » the axial and circumferential directions. These forces can be used as momentum forces in a CFD code to simulate the effect of the fan in an underhood thermal management simulation.« less

  14. New York Network Members Join Forces to Create Green Jobs | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New York Network Members Join Forces to Create Green Jobs New York Network Members Join ... knowledge of the housing market to create energy efficiency contracting jobs with fellow ...

  15. Report of the Task Force on FracFocus 2.0 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Task Force on FracFocus 2.0 Report of the Task Force on FracFocus 2.0 This report presents the findings and recommendations for the Secretary of Energy Advisory Board (SEAB) Task Force on FracFocus. The Task Force was charged with reviewing how FracFocus 2.0 houses the information Federal and State regulatory agencies require as part of their regulatory functions with regard to disclosure of the composition and quantities of fracturing fluids injected into unconventional oil and gas wells. This

  16. Linkage to Previous International PV Module QA Task Force Workshops; Proposal for Rating System (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Sample, T.; Yamamichi, M.; Kondo, M.

    2013-05-01

    This presentation gives the historical background of the creation of the International PV QA Task Force as an introduction to the PV Module Reliability Workshop.

  17. Effect of polarization force on the Mach cones in a complex plasma

    SciTech Connect (OSTI)

    Bandyopadhyay, P. [Max-Planck Institut fuer Extraterrestrische Physik, D-85741, Garching (Germany); Institute for Plasma Research, Bhat, Gandhinagar-382428 (India); Jiang, K. [Max-Planck Institut fuer Extraterrestrische Physik, D-85741, Garching (Germany); Infineon Technologies AG, Am Campeon 1-12, D-85579 Neubiberg (Germany); Dey, R. [Max-Planck Institut fuer Plasma Physik, Boltzmannstr. 2, 85748, Garching (Germany); Morfill, G. E. [Max-Planck Institut fuer Extraterrestrische Physik, D-85741, Garching (Germany)

    2012-12-15

    We report the modifications of compressional Mach cone propagation characteristics due to the polarization force acting on micron size dust particles embedded in a non-uniform plasma. We solve the hydrodynamic fluid equations for highly charged dust particles to investigate the Mach cone by incorporating the polarization force in the momentum equation and observe the structural change on lateral wakes at different polarization force for a given Mach number and Epstein drag force. We also notice that the maximum amplitude of normalized dust density perturbation decreases with the increase of polarization interaction when the other parameters remain constant.

  18. Control of Prestressing Force in Rod for Reducing Bending in Beams

    SciTech Connect (OSTI)

    Wong, M. B.

    2010-05-21

    This paper presents a method to determine the prestressing force required in a rod for reducing the bending effects in a beam. The rod is positioned underneath the beam such that the prestressing force is counteracting the effects of beam bending. It has been found that the prestressing force may also increase the bending as a result of P-delta effect. Therefore, the choice of both the prestressing force and the rod eccentricity from the beam axis is important in determining the appropriate actions to resist the bending of the beam. Over-prestressing the rod may even induce bending or buckling failure in the beam in the reverse direction.

  19. Systems and methods of detecting force and stress using tetrapod nanocrystal

    DOE Patents [OSTI]

    Choi, Charina L.; Koski, Kristie J.; Sivasankar, Sanjeevi; Alivisatos, A. Paul

    2013-08-20

    Systems and methods of detecting force on the nanoscale including methods for detecting force using a tetrapod nanocrystal by exposing the tetrapod nanocrystal to light, which produces a luminescent response by the tetrapod nanocrystal. The method continues with detecting a difference in the luminescent response by the tetrapod nanocrystal relative to a base luminescent response that indicates a force between a first and second medium or stresses or strains experienced within a material. Such systems and methods find use with biological systems to measure forces in biological events or interactions.

  20. CASL - CFD-Based Turbulence Force Evaluation for Grid-to-Rod...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    light water reactors. GTRF is a complicated phenomenon, which includes flow excitation force, non-linear mechanical vibration, tribology, changing irradiated material properties...

  1. WAPD-TM-1349 DOE RESEARCH AND DEVELOPMENT REPORT FORCES IN BOLTED...

    Office of Scientific and Technical Information (OSTI)

    DOE RESEARCH AND DEVELOPMENT REPORT FORCES IN BOLTED JOINTS : ANALYSIS METHODS AND TEST RESULTS" UTILIZED FOR NUCLEAR- CORE APPLICATIONS (LWBR Devel

  2. Maximum allowable hydraulic ram force for heel jet removal Tank 241-C-106

    SciTech Connect (OSTI)

    PAULSEN, S.S.

    2003-01-10

    This document contains an evaluation of the maximum force that can be used to actuate the hydraulic ram assembly without causing permanent damage to the riser or pit.

  3. Blackout 2003: U.S. - Canada Task Force Presents Final Report onBlackout of

    Energy Savers [EERE]

    August 2003 | Department of Energy U.S. - Canada Task Force Presents Final Report onBlackout of August 2003 Blackout 2003: U.S. - Canada Task Force Presents Final Report onBlackout of August 2003 August 14, 2003, saw the worst blackout in North American history. Today, Spencer Abraham, U.S. Secretary of Energy, and the Honorable R. John Efford, Minister of Natural Resources Canada, released the Final Report of the U.S. -Canada Power System Outage Task Force. PDF icon U.S. - Canada Task Force

  4. January 6, 2014 SEAB FracFocus 2.0 Task Force Meeting Minutes | Department

    Office of Environmental Management (EM)

    of Energy January 6, 2014 SEAB FracFocus 2.0 Task Force Meeting Minutes January 6, 2014 SEAB FracFocus 2.0 Task Force Meeting Minutes The SEAB FracFocus 2.0 Task Force, chaired by John Deutch, held its first meeting on January 6, 2014. The Task Force is charged with reviewing how FracFocus 2.0 houses the information Federal and State regulatory agencies require as part of their regulatory functions with regard to disclosure of the composition and quantities of fracturing fluids injected into

  5. January 6, 2014 SEAB FracFocus 2.0 Task Force Meeting | Department of

    Office of Environmental Management (EM)

    Energy January 6, 2014 SEAB FracFocus 2.0 Task Force Meeting January 6, 2014 SEAB FracFocus 2.0 Task Force Meeting SECRETARY OF ENERGY ADVISORY BOARD FRACFOCUS 2.0 TASK FORCE MEETING January 6, 2014 1000 Independence Avenue, SW, Washington, DC Download Meeting Minutes 9:45-10:00 AM Welcome and Opening John Deutch, Task Force Chair 10:00-10:45 AM DOE Presentation on FracFocus 2.0 (download) Paula Gant, Deputy Assistant Secretary, US Department of Energy 10:45-11:45 AM FracFocus Presentation

  6. Free vibrations of U-shaped atomic force microscope probes

    SciTech Connect (OSTI)

    Rezaei, E.; Turner, J. A.

    2014-05-07

    Contact resonance atomic force microscope (AFM) methods have been used to quantify the elastic and viscoelastic properties of a variety of materials such as polymers, ceramics, biological materials, and metals with spatial resolution on the order of tens of nanometers. This approach involves measurement of the resonant frequencies of the AFM probe both for the free case and the case for which the tip is in contact with a sample. Vibration models of the probe and tip-sample contact models are then used to determine the sample properties from the frequency behavior and to create images of the sample properties. This work has been primarily focused on rectangular, single-beam probes for which the vibration models are relatively simple. Recently, U-shaped AFM probes have been developed to allow local heating of samples and the resonances of these probes are much more complex. In this article, a simplified analytical model of these U-shaped probes is described. This three beam model includes two beams clamped at one end and connected with a perpendicular cross beam at the other end. The beams are assumed only to bend in flexure and twist but their coupling allows a wide range of possible dynamic behavior. Results are presented for the first ten modes and the mode shapes are shown to have complex coupling between the flexure and twisting of the beams, particularly for the higher modes. All resonant frequency results are in good agreement with finite element results for the three probe designs and two values of thickness considered (all wavenumbers are within 3.0%). This work is anticipated to allow U-shaped probes to be used eventually for quantitative measurements of sample material properties during heating using a contact resonance approach.

  7. Apparatus for imaging liquid and dielectric materials with scanning polarization force microscopy

    DOE Patents [OSTI]

    Hu, J.; Ogletree, D.F.; Salmeron, M.; Xiao, X.

    1998-04-28

    The invention images dielectric polarization forces on surfaces induced by a charged scanning force microscope (SFM) probe tip. On insulators, the major contribution to the surface polarizability at low frequencies is from surface ions. The mobility of these ions depends strongly on the humidity. Using the inventive SFM, liquid films, droplets, and other weakly adsorbed materials have been imaged. 9 figs.

  8. Method for imaging liquid and dielectric materials with scanning polarization force microscopy

    DOE Patents [OSTI]

    Hu, J.; Ogletree, D.F.; Salmeron, M.; Xiao, X.

    1999-03-09

    The invention images dielectric polarization forces on surfaces induced by a charged scanning force microscope (SFM) probe tip. On insulators, the major contribution to the surface polarizability at low frequencies is from surface ions. The mobility of these ions depends strongly on the humidity. Using the inventive SFM, liquid films, droplets, and other weakly adsorbed materials have been imaged. 9 figs.

  9. Method for imaging liquid and dielectric materials with scanning polarization force microscopy

    DOE Patents [OSTI]

    Hu, Jun (Berkeley, CA); Ogletree, D. Frank (El Cerrito, CA); Salmeron, Miguel (El Cerrito, CA); Xiao, Xudong (Kowloon, CN)

    1999-01-01

    The invention images dielectric polarization forces on surfaces induced by a charged scanning force microscope (SFM) probe tip. On insulators, the major contribution to the surface polarizability at low frequencies is from surface ions. The mobility of these ions depends strongly on the humidity. Using the inventive SFM, liquid films, droplets, and other weakly adsorbed materials have been imaged.

  10. Apparatus for imaging liquid and dielectric materials with scanning polarization force microscopy

    DOE Patents [OSTI]

    Hu, Jun (Berkeley, CA); Ogletree, D. Frank (El Cerrito, CA); Salmeron, Miguel (El Cerrito, CA); Xiao, Xudong (Kowloon, CN)

    1998-01-01

    The invention images dielectric polarization forces on surfaces induced by a charged scanning force microscope (SFM) probe tip. On insulators, the major contribution to the surface polarizability at low frequencies is from surface ions. The mobility of these ions depends strongly on the humidity. Using the inventive SFM, liquid films, droplets, and other weakly adsorbed materials have been imaged.

  11. The NEPA Task Force Report to the Council on Environmental Quality: Modernizing NEPA Implementation (CEQ, 2003)

    Broader source: Energy.gov [DOE]

    This report presents the results of research and consultations by the National Environmental Policy Task Force concerning the implementation of the environmental impact analysis requirement of the National Environmental Policy Act (NEPA). The task force interviewed federal agencies; reviewed public comments, literature, reports, and case studies; and spoke with individuals and representatives from federal, state, and local governments, tribes, and interest groups.

  12. Crushable structure performance determined from reconstructed dynamic forces during impact tests

    SciTech Connect (OSTI)

    Bateman, V.I.

    1995-01-01

    A force reconstruction technique has been used to assess the dynamic performance of a crushable structure (a bomb nose) in both the axial (90{degrees}) and slapdown (30{degrees}) impact conditions. The dynamic force characteristics for the nose design, determined from these test results, have been used to write a dynamic force specification for a new nose design that will replace the old nose. The dynamic forces are reconstructed from measured acceleration responses with the Sum of Weighted Accelerations Technique (SWAT) developed at Sandia National Laboratories. Axial characterizations for the old nose are presented from tests at two SNL facilities: a rocket rail launcher facility and an 18-Inch horizontal actuator facility. The characterizations for the old nose are compared to the characterizations for two new nose designs. Slapdown characterizations for the old nose are presented. Incorporation of the test results into a dynamic force specification is discussed.

  13. Linear and non-linear forced response of a conical, ducted, laminar premixed flame

    SciTech Connect (OSTI)

    Karimi, Nader; Brear, Michael J.; Jin, Seong-Ho; Monty, Jason P. [Department of Mechanical Engineering, University of Melbourne, Parkville, 3010 Vic. (Australia)

    2009-11-15

    This paper presents an experimental study on the dynamics of a ducted, conical, laminar premixed flame subjected to acoustic excitation of varying amplitudes. The flame transfer function is measured over a range of forcing frequencies and equivalence ratios. In keeping with previous works, the measured flame transfer function is in good agreement with that predicted by linear kinematic theory at low amplitudes of acoustic velocity excitation. However, a systematic departure from linear behaviour is observed as the amplitude of the velocity forcing upstream of the flame increases. This non-linearity is mostly in the phase of the transfer function and manifests itself as a roughly constant phase at high forcing amplitude. Nonetheless, as predicted by non-linear kinematic arguments, the response always remains close to linear at low forcing frequencies, regardless of the forcing amplitude. The origin of this phase behaviour is then sought through optical data post-processing. (author)

  14. Wave forces on an array of oscillating water column type free standing wave energy caissons

    SciTech Connect (OSTI)

    Neelamani, S.; Thiruvenkatasamy, K.

    1995-12-31

    The wave induced in-line forces on a 1:50 scale model of an array of Multi resonant Oscillating Water Column (MOWC) type free standing wave energy caisson were experimentally investigated. A range of hydrodynamic parameters with different damping of oscillating water column (OWC) chamber and various center to center spacings between the caissons were used. In general, the force on the MOWC caisson array is two times that of a vertical wall, for maximum damping of OWC chamber. Reduction of damping of the OWC air chamber reduces the force on the array of caissons. With reduced damping, forces on OWC array can even be smaller than that the ones on a vertical wall. For smaller center to center (C/C) spacing between the caissons with respect to its harbor width, OWC array acts like a perforated breakwater, attracting smaller wave forces and for higher C/C spacing, it behaves like a vertical wall.

  15. Computational Intelligence Based Data Fusion Algorithm for Dynamic sEMG and Skeletal Muscle Force Modelling

    SciTech Connect (OSTI)

    Chandrasekhar Potluri,; Madhavi Anugolu; Marco P. Schoen; D. Subbaram Naidu

    2013-08-01

    In this work, an array of three surface Electrography (sEMG) sensors are used to acquired muscle extension and contraction signals for 18 healthy test subjects. The skeletal muscle force is estimated using the acquired sEMG signals and a Non-linear Wiener Hammerstein model, relating the two signals in a dynamic fashion. The model is obtained from using System Identification (SI) algorithm. The obtained force models for each sensor are fused using a proposed fuzzy logic concept with the intent to improve the force estimation accuracy and resilience to sensor failure or misalignment. For the fuzzy logic inference system, the sEMG entropy, the relative error, and the correlation of the force signals are considered for defining the membership functions. The proposed fusion algorithm yields an average of 92.49% correlation between the actual force and the overall estimated force output. In addition, the proposed fusionbased approach is implemented on a test platform. Experiments indicate an improvement in finger/hand force estimation.

  16. The Secretary of Energy Advisory Board Task Force to Support Evaluation of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the New Funding Constructs for Energy Research and Development (R&D) in the Department of Energy | Department of Energy Task Force to Support Evaluation of the New Funding Constructs for Energy Research and Development (R&D) in the Department of Energy The Secretary of Energy Advisory Board Task Force to Support Evaluation of the New Funding Constructs for Energy Research and Development (R&D) in the Department of Energy The Secretary of Energy Advisory Board Task Force to

  17. Controlling the optical dipole force for molecules with field-induced alignment

    SciTech Connect (OSTI)

    Purcell, S. M.; Barker, P. F.

    2010-09-15

    We measure the role of field-induced alignment on the dipole force for molecules using a single focused nonresonant laser beam. We show that through the alignment process we can modify the effective polarizability by field polarization and thus control the center-of-mass motion of the molecule. We observe a maximum change of 20% in the dipole force on CS{sub 2} molecules when changing from linearly to circularly polarized light. Additionally, the effect of the dipole force on different vibrational states is also studied.

  18. Y-12's Protective Force donates coats to VMC | Y-12 National Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complex 's Protective Force ... Y-12's Protective Force donates coats to VMC Posted: January 25, 2016 - 1:17pm Veterans and current Y-12 Security Police Officers delivered former uniform coats to the Volunteer Ministry Center. A few years ago, Y-12's Protective Force changed from solid gray uniforms to their current digital camouflage gear. The old uniforms-some of which were actually new, with tags still on-were considered excess and likely headed toward a landfill. Around that same time,

  19. A short model excitation of an asymmetric force free superconducting transmission line magnet

    SciTech Connect (OSTI)

    Wake, M.; Sato, H.; Carcagno, R.; Foster, W.; Hays, S.; Kashikhin, V.; Oleck, A.; Piekarz, H.; Rabehl, R,; /Fermilab

    2005-09-01

    A short model of asymmetric force free magnet with single beam aperture was tested at Fermilab together with the excitation test of VLHC transmission line magnet. The design concept of asymmetric force free superconducting magnet was verified by the test. The testing reached up to 104 kA current and no indication of force imbalance was observed. Since the model magnet length was only 10cm, A 0.75m model was constructed and tested at KEK with low current to ensure the validity of the design. The cool down and the excitation at KEK were also successful finding very small thermal contraction of the conductor and reasonable field homogeneity.

  20. Casimir force for absorbing media in an open quantum system framework: Scalar model

    SciTech Connect (OSTI)

    Lombardo, Fernando C.; Rubio Lopez, Adrian E.; Mazzitelli, Francisco D.

    2011-11-15

    In this article we compute the Casimir force between two finite-width mirrors at finite temperature, working in a simplified model in 1+1 dimensions. The mirrors, considered as dissipative media, are modeled by a continuous set of harmonic oscillators which in turn are coupled to an external environment at thermal equilibrium. The calculation of the Casimir force is performed in the framework of the theory of open quantum systems. It is shown that the Casimir interaction has two different contributions: the usual radiation pressure from the vacuum, which is obtained for ideal mirrors without dissipation or losses, and a Langevin force associated with the noise induced by the interaction between dielectric atoms in the slabs and the thermal bath. Both contributions to the Casimir force are needed in order to reproduce the analogous Lifshitz formula in 1+1 dimensions. We also discuss the relationship between the electromagnetic properties of the mirrors and the spectral density of the environment.

  1. Distribution System Audits, Leak Detection, and Repair: Kirtland Air Force Base Leak Detection and Repair Program

    SciTech Connect (OSTI)

    2009-01-14

    Water Best Management Practice #3 Fact Seet: Outlines how a leak detection and repair program helped Kirtland Air Force Base perform distribution system audits, leak detection, and repair to conserve water site-wide.

  2. Results from electrostatic calibrations for measuring the Casimir force in the cylinder-plane geometry

    SciTech Connect (OSTI)

    Wei, Q.; Dalvit, D. A. R.; Lombardo, F. C.; Mazzitelli, F. D.; Onofrio, R.

    2010-05-15

    We report on measurements performed on an apparatus aimed to study the Casimir force in the cylinder-plane configuration. The electrostatic calibrations evidence anomalous behaviors in the dependence of the electrostatic force and the minimizing potential upon distance. We discuss analogies and differences of these anomalies with respect to those already observed in the sphere-plane configuration. At the smallest explored distances we observe frequency shifts of non-Coulombian nature preventing the measurement of the Casimir force in the same range. We also report on measurements performed in the parallel-plane configuration, showing that the dependence on distance of the minimizing potential, if present at all, is milder than in the sphere-plane or cylinder-plane geometries. General considerations on the interplay between the distance-dependent minimizing potential and the precision of Casimir force measurements in the range relevant to detect the thermal corrections for all geometries are finally reported.

  3. NNSA, Air Force Complete Successful B61-12 Life Extension Program...

    National Nuclear Security Administration (NNSA)

    States Air Force completed the third development flight test of a non-nuclear B61-12 nuclear gravity bomb at Tonopah Test Range in Nevada on October 20, 2015. "This demonstration ...

  4. The Secretary of Energy Advisory Board (SEAB) Task Force on Next Generation High Performance Computing

    Broader source: Energy.gov [DOE]

    The Secretary of Energy Advisory Board (SEAB) Task Force on Next Generation High Performance Computing is composed of SEAB members and independent experts charged with reviewing the mission and...

  5. An ab initio approach to free-energy reconstruction using logarithmic mean force dynamics

    SciTech Connect (OSTI)

    Nakamura, Makoto Obata, Masao; Morishita, Tetsuya; Oda, Tatsuki; Institute of Science and Engineering, Kanazawa University, Kanazawa 920-1192

    2014-05-14

    We present an ab initio approach for evaluating a free energy profile along a reaction coordinate by combining logarithmic mean force dynamics (LogMFD) and first-principles molecular dynamics. The mean force, which is the derivative of the free energy with respect to the reaction coordinate, is estimated using density functional theory (DFT) in the present approach, which is expected to provide an accurate free energy profile along the reaction coordinate. We apply this new method, first-principles LogMFD (FP-LogMFD), to a glycine dipeptide molecule and reconstruct one- and two-dimensional free energy profiles in the framework of DFT. The resultant free energy profile is compared with that obtained by the thermodynamic integration method and by the previous LogMFD calculation using an empirical force-field, showing that FP-LogMFD is a promising method to calculate free energy without empirical force-fields.

  6. Assistant Secretray Triay's Written Statement before Senate Armed Services Subcommittee on Strategic Forces (April 21, 2010)

    Broader source: Energy.gov [DOE]

    Statement of Inès Triay, Assistant Secretary of Environmental Management, United States Department of Energy, before the Subcommittee on Strategic Forces, Committee on Armed Services, United States...

  7. PROJECT PROFILE: Support of International Photovoltaic Module Quality Assurance Task Force (PVQAT)

    Broader source: Energy.gov [DOE]

    This project supports the National Renewable Energy Laboratory’s involvement in the Photovoltaic (PV) Module Quality Assurance Task Force (PVQAT) to develop the international test standards necessary to validate the quality of PV modules and determine service lifetimes.

  8. Work_Force_Restructuring_Activities_December_10_2008.pdf | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy Work_Force_Restructuring_Activities_December_10_2008.pdf More Documents & Publications Equal Employment Opportunity/Workforce Restructuring Laws Self-Select Voluntary Separation Plan Template Workforce Restructuring Policy

  9. Aerosol Radiative Forcing During Spring-Summer 2002 from Measurements at IAP Scientific Station Near Moscow

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forcing During Spring-Summer 2002 from Measurements at IAP Scientific Station Near Moscow G. S. Golitsyn, I. A. Gorchakova, and I. I. Mokhov A. M. Obukohov Institute of Atmospheric Physics Russian Academy of Science Moscow, Russia A. N. Rublev Russian Research Center Kurchatov Institute Moscow, Russia Introduction Aerosol Radiative Forcing (ARF) is estimated for spring-summer conditions from measurements during the Cloud-Aerosol-Radiation Experiment in 2002 (ZCAREX-2002) at the Zvenigorod

  10. Aerosol Radiative Forcing Under Cloudless Conditions.in Winter ZCAREX-2001

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forcing Under Cloudless Conditions in Winter ZCAREX-2001 G. S. Golitsyn, I. A. Gorchakova, and I. I. Mokhov Institute of Atmospheric Physic Moscow, Russia Introduction Aerosol radiative forcing (ARF) is estimated for winter clear-sky conditions from measurements during ZCAREX-2001-Cloud-Aerosol-Radiation Experiment in February-March, 2001 at the Zvenigorod Scientific Station (ZSS) of the A.M. Obukhov Institute of Atmospheric Physics RAS. ARF in the shortwave range is determined by the difference

  11. Modelled Black Carbon Radiative Forcing and Atmospheric Lifetime in AeroCom

    Office of Scientific and Technical Information (OSTI)

    Phase II Constrained by Aircraft Observations (Journal Article) | SciTech Connect Modelled Black Carbon Radiative Forcing and Atmospheric Lifetime in AeroCom Phase II Constrained by Aircraft Observations Citation Details In-Document Search Title: Modelled Black Carbon Radiative Forcing and Atmospheric Lifetime in AeroCom Phase II Constrained by Aircraft Observations Black carbon (BC) aerosols absorb solar radiation, and are generally held to exacerbate global warming through exerting a

  12. Quark Forces from Hadronic Spectroscopy (Journal Article) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Quark Forces from Hadronic Spectroscopy Citation Details In-Document Search Title: Quark Forces from Hadronic Spectroscopy We consider the implications of the most general two-body quark-quark interaction Hamiltonian for the spin-flavor structure of the negative parity L=1 excited baryons. Assuming the most general two-body quark interaction Hamiltonian, we derive two correlations among the masses and mixing angles of these states, which constrain the mixing angles, and can be used to test for

  13. Report of the Infrastructure Task Force of the Nuclear Energy Research

    Office of Environmental Management (EM)

    Advisory Committee | Department of Energy Report of the Infrastructure Task Force of the Nuclear Energy Research Advisory Committee Report of the Infrastructure Task Force of the Nuclear Energy Research Advisory Committee On October 1, 2002 the DOE Nuclear Energy Research Advisory Committee was asked to provide specific, focused updates to its Nuclear Science and Technology Infrastructure Roadmap and review the specific issues at the DOE key nuclear energy research and development (R&D)

  14. House Subcommittee on Strategic Forces of the Committee on Armed Services |

    Energy Savers [EERE]

    Department of Energy Strategic Forces of the Committee on Armed Services House Subcommittee on Strategic Forces of the Committee on Armed Services January 31, 2007 - 10:15am Addthis Statement of Energy Secretary Samuel W. Bodman Madam Chairman and members of the subcommittee, I am pleased to appear before you to provide my assessment of the Department's progress in implementing Title 32 - the National Nuclear Security Administration Act. This is the first opportunity I have had to testify

  15. A thermo-mechanical correlation with driving forces for hcp martensite and

    Office of Scientific and Technical Information (OSTI)

    twin formations in the Fe-Mn-C system exhibiting multicomposition sets (Journal Article) | DOE PAGES Accepted Manuscript: A thermo-mechanical correlation with driving forces for hcp martensite and twin formations in the Fe-Mn-C system exhibiting multicomposition sets « Prev Next » Title: A thermo-mechanical correlation with driving forces for hcp martensite and twin formations in the Fe-Mn-C system exhibiting multicomposition sets Thermodynamic properties of the Fe-Mn-C system were

  16. The Secretary of Energy Advisory Board (SEAB) Task Force on DOE National

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Laboratories | Department of Energy DOE National Laboratories The Secretary of Energy Advisory Board (SEAB) Task Force on DOE National Laboratories The Secretary of Energy Advisory Board (SEAB) Task Force on DOE National Laboratories (Labs) was created to provide advice, guidance, and recommendations on important issues related to improving the health and management of the labs. One of the Secretary's priorities is to strengthen the relationship between the Department and the National labs

  17. The Secretary of Energy Advisory Board (SEAB) Task Force on Nuclear

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nonproliferation | Department of Energy Nuclear Nonproliferation The Secretary of Energy Advisory Board (SEAB) Task Force on Nuclear Nonproliferation The Secretary of Energy Advisory Board (SEAB) Task Force on Nuclear Nonproliferation comprises SEAB members and individuals with expertise and experience in the technologies, institutions, and policy issues associated with curbing the proliferation of nuclear weapons and the materials, technologies, and expertise associated with them. The Task

  18. The Secretary of Energy Advisory Board (SEAB) Task Force to Support the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quadrennial Energy Review Process | Department of Energy to Support the Quadrennial Energy Review Process The Secretary of Energy Advisory Board (SEAB) Task Force to Support the Quadrennial Energy Review Process The Secretary of Energy Advisory Board (SEAB) Task Force to support the Quadrennial Energy Review Process is composed of SEAB members and independent experts, with experience in energy policy and planning, charged with serving as a resource for the Department in the crucial formative

  19. Developing Continuous SCM/CRM Forcing Using NWP Products Constrained by ARM Observations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Developing Continuous SCM/CRM Forcing Using NWP Products Constrained by ARM Observations S. C. Xie, R. T. Cederwall, and J. J. Yio Lawrence Livermore National Laboratory Livermore, California M. H. Zhang State University of New York Stony Brook, New York Introduction This study examines the feasibility of using numerical weather prediction (NWP) model products to replace radiosondes to develop long-term continuous forcing, instead of just intensive operational periods (IOPs), for single-column

  20. Forces in bolted joints: analysis methods and test results utilized for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear core applications (LWBR Development Program) (Technical Report) | SciTech Connect Forces in bolted joints: analysis methods and test results utilized for nuclear core applications (LWBR Development Program) Citation Details In-Document Search Title: Forces in bolted joints: analysis methods and test results utilized for nuclear core applications (LWBR Development Program) × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of

  1. New York Network Members Join Forces to Create Green Jobs | Department of

    Energy Savers [EERE]

    Energy New York Network Members Join Forces to Create Green Jobs New York Network Members Join Forces to Create Green Jobs Photo of a group of five people standing, looking at the camera. Better Buildings Residential Network member Rural Ulster Preservation Company (RUPCO) is using its knowledge of the housing market to create energy efficiency contracting jobs with fellow Residential Network member and Better Buildings Neighborhood Program partner NYSERDA. RUPCO Outreach Coordinator Mike

  2. Microsoft Word - SEAB Lab Task Force Interim Report Final.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Report of the Secretary of Energy Task Force on DOE National Laboratories June 17, 2015 This page intentionally left blank 1 EXECUTIVE SUMMARY This interim report of the Secretary of Energy Advisory Board (SEAB) National Laboratory Task Force (TF) identifies the constraints on and evaluates the effectiveness of laboratory operations that impact the performance and efficiency of the DOE national laboratories. The TF stresses the overriding importance of two actions: clarifying the authorities and

  3. Modes in RFPs by RF Ponderomotive Forces V. A. Svidzinski, S. C. Prager

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Possibility of Stabilization of Resistive Wall Modes in RFPs by RF Ponderomotive Forces V. A. Svidzinski, S. C. Prager Physics Department, University of Wisconsin-Madison, WI53706 Abstract. Ponderomotive forces from applied rf fields are generally too weak to stabilize MHD instabilities in toroidal plasmas for practical values of rf fields. We are investigating whether rf waves in a vacuum region between a plasma and wall can stabilize resistive wall instabilities. In our model the rf waves are

  4. The mean climate of the Community Atmosphere Model (CAM4) in forced SST and

    Office of Scientific and Technical Information (OSTI)

    fully coupled experiments (Journal Article) | SciTech Connect Journal Article: The mean climate of the Community Atmosphere Model (CAM4) in forced SST and fully coupled experiments Citation Details In-Document Search Title: The mean climate of the Community Atmosphere Model (CAM4) in forced SST and fully coupled experiments The Community Atmosphere Model, version 4 (CAM4) was released as the atmosphere component of the Community Climate System Model, version 4 (CCSM4) and is described. The

  5. Trimodal Tapping Mode Atomic Force Microscopy. Simultaneous 4D Mapping of

    Office of Scientific and Technical Information (OSTI)

    Conservative and Dissipative Probe-Sample Interactions of Energy-Relevant Materials (Technical Report) | SciTech Connect Trimodal Tapping Mode Atomic Force Microscopy. Simultaneous 4D Mapping of Conservative and Dissipative Probe-Sample Interactions of Energy-Relevant Materials Citation Details In-Document Search Title: Trimodal Tapping Mode Atomic Force Microscopy. Simultaneous 4D Mapping of Conservative and Dissipative Probe-Sample Interactions of Energy-Relevant Materials This project

  6. Tactical Response Force Pursuit Operations at Idaho National Laboratory, INS-O-13-02

    Energy Savers [EERE]

    Tactical Response Force Pursuit Operations at Idaho National Laboratory INS-O-13-02 November 2012 U.S. Department of Energy Office of Inspector General Office of Audits and Inspections Department of Energy Washington, DC 20585 November 30, 2012 MEMORANDUM FOR THE MANAGER, IDAHO OPERATIONS OFFICE FROM: Sandra D. Bruce Assistant Inspector General for Inspections Office of Inspector General SUBJECT: INFORMATION: Inspection Report on "Tactical Response Force Pursuit Operations at Idaho

  7. Management Alert on Protective Force Training Facility Utilization at the Pantex Plant, IG-0855

    Office of Environmental Management (EM)

    Management Alert on Protective Force Training Facility Utilization at the Pantex Plant DOE/IG-0855 September 2011 Department of Energy Washington, DC 20585 September 27, 2011 MEMORANDUM FOR THE ADMINISTRATOR, NATIONAL NUCLEAR SECURITY ADMINISTRATION FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION: Management Alert on "Protective Force Training Facility Utilization at the Pantex Plant" IMMEDIATE CONCERN As part of our ongoing audit to determine whether the Department of

  8. Government and Industry a Force for Collaboration at the Energy Roadmap Update Workshop

    Office of Environmental Management (EM)

    and Industry A Force for Collaboration at the Energy Roadmap Update Workshop Sept. 16, 2009 Energy sector leaders in the public and private sectors have once again come together to identify high- priority collaborative actions that will further secure control systems in the electric, oil, and natural gas sectors. More than 80 asset owners and operators, researchers, technology developers, security specialists, equipment vendors, and government stakeholders joined forces at a workshop to help

  9. Microsoft Word - IG-0742 LLNL ProForce Supply Room 101106.doc

    Office of Environmental Management (EM)

    Inspection Report Protective Force Property Management at Lawrence Livermore National Laboratory DOE/IG-0742 October 2006 U.S. Department of Energy Office of Inspector General Office of Inspections and Special Inquiries PROTECTIVE FORCE PROPERTY MANAGEMENT AT LAWRENCE LIVERMORE NATIONAL LABORATORY TABLE OF CONTENTS OVERVIEW Introduction and Objective 1 Observations and Conclusions 2 DETAILS OF FINDINGS Mission Equipment Management 3 Mission Equipment Availability 6 Security Police Officer

  10. Dyess Air Force Base Water Conservation and Green Energy | Department of

    Office of Environmental Management (EM)

    Energy Dyess Air Force Base Water Conservation and Green Energy Dyess Air Force Base Water Conservation and Green Energy Fact sheet describes the Federal Energy Management Program (FEMP) Energy Savings Performance Contract (ESPC) Success Story on water conservation and green energy at Dyess Air Foce Base at Dyess, Texas. PDF icon espc_ss_dyess.pdf More Documents & Publications Energy Savings Performance Contract Success Stories Energy Savings Performance Contract ENABLE Briefing Harold

  11. Design of a self-aligned, wide temperature range (300 mK-300 K) atomic force microscope/magnetic force microscope with 10 nm magnetic force microscope resolution

    SciTech Connect (OSTI)

    Karc?, zgr; Dede, Mnir

    2014-10-01

    We describe the design of a wide temperature range (300 mK-300 K) atomic force microscope/magnetic force microscope with a self-aligned fibre-cantilever mechanism. An alignment chip with alignment groves and a special mechanical design are used to eliminate tedious and time consuming fibre-cantilever alignment procedure for the entire temperature range. A low noise, Michelson fibre interferometer was integrated into the system for measuring deflection of the cantilever. The spectral noise density of the system was measured to be ~12 fm/?Hz at 4.2 K at 3 mW incident optical power. Abrikosov vortices in BSCCO(2212) single crystal sample and a high density hard disk sample were imaged at 10 nm resolution to demonstrate the performance of the system.

  12. Forcing, feedbacks and climate sensitivity in CMIP5 coupled atmosphere-ocean climate models

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Andrews, Timothy; Gregory, Jonathan M.; Webb, Mark J.; Taylor, Karl E.

    2012-05-15

    We quantify forcing and feedbacks across available CMIP5 coupled atmosphere-ocean general circulation models (AOGCMs) by analysing simulations forced by an abrupt quadrupling of atmospheric carbon dioxide concentration. This is the first application of the linear forcing-feedback regression analysis of Gregory et al. (2004) to an ensemble of AOGCMs. The range of equilibrium climate sensitivity is 2.1–4.7 K. Differences in cloud feedbacks continue to be important contributors to this range. Some models show small deviations from a linear dependence of top-of-atmosphere radiative fluxes on global surface temperature change. We show that this phenomenon largely arises from shortwave cloud radiative effects overmore » the ocean and is consistent with independent estimates of forcing using fixed sea-surface temperature methods. Moreover, we suggest that future research should focus more on understanding transient climate change, including any time-scale dependence of the forcing and/or feedback, rather than on the equilibrium response to large instantaneous forcing.« less

  13. Statistics of reversible transitions in two-state trajectories in force-ramp spectroscopy

    SciTech Connect (OSTI)

    Diezemann, Gregor

    2014-05-14

    A possible way to extract information about the reversible dissociation of a molecular adhesion bond from force fluctuations observed in force ramp experiments is discussed. For small loading rates the system undergoes a limited number of unbinding and rebinding transitions observable in the so-called force versus extension (FE) curves. The statistics of these transient fluctuations can be utilized to estimate the parameters for the rebinding rate. This is relevant in the experimentally important situation where the direct observation of the reversed FE-curves is hampered, e.g., due to the presence of soft linkers. I generalize the stochastic theory of the kinetics in two-state models to the case of time-dependent kinetic rates and compute the relevant distributions of characteristic forces. While for irreversible systems there is an intrinsic relation between the rupture force distribution and the population of the free-energy well of the bound state, the situation is slightly more complex if reversible systems are considered. For a two-state model, a stationary rupture force distribution that is proportional to the population can be defined and allows to consistently discuss quantities averaged over the transient fluctuations. While irreversible systems are best analyzed in the soft spring limit of small pulling device stiffness and large loading rates, here I argue to use the stiffness of the pulling device as a control parameter in addition to the loading rate.

  14. A transferable force field for CdS-CdSe-PbS-PbSe solid systems

    SciTech Connect (OSTI)

    Fan, Zhaochuan; Vlugt, Thijs J. H.; Koster, Rik S.; Fang, Changming; Huis, Marijn A. van; Wang, Shuaiwei; Yalcin, Anil O.; Tichelaar, Frans D.; Zandbergen, Henny W.

    2014-12-28

    A transferable force field for the PbSe-CdSe solid system using the partially charged rigid ion model has been successfully developed and was used to study the cation exchange in PbSe-CdSe heteronanocrystals [A. O. Yalcin et al., Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth, Nano Lett. 14, 36613667 (2014)]. In this work, we extend this force field by including another two important binary semiconductors, PbS and CdS, and provide detailed information on the validation of this force field. The parameterization combines Bader charge analysis, empirical fitting, and ab initio energy surface fitting. When compared with experimental data and density functional theory calculations, it is shown that a wide range of physical properties of bulk PbS, PbSe, CdS, CdSe, and their mixed phases can be accurately reproduced using this force field. The choice of functional forms and parameterization strategy is demonstrated to be rational and effective. This transferable force field can be used in various studies on II-VI and IV-VI semiconductor materials consisting of CdS, CdSe, PbS, and PbSe. Here, we demonstrate the applicability of the force field model by molecular dynamics simulations whereby transformations are initiated by cation exchange.

  15. A feasibility study for experimentally determining dynamic force distribution in a lap joint.

    SciTech Connect (OSTI)

    Mayes, Randall Lee

    2013-11-01

    Developing constitutive models of the physics in mechanical joints is currently stymied by inability to measure forces and displacements within the joint. The current state of the art estimates whole joint stiffness and energy loss per cycle from external measured force input and one or two acceleration responses. To validate constitutive models beyond this state requires a measurement of the distributed forces and displacements at the joint interface. Unfortunately, introducing measurement devices at the interface completely disrupts the desired physics. A feasibility study is presented for a non-intrusive method of solving for the interface dynamic forces from an inverse problem using full field measured responses. The responses come from the viewable surface of a beam. The noise levels associated with digital image correlation and continuous scanning laser Doppler velocimetry are evaluated from typical beam experiments. Two inverse problems are simulated. One utilizes the extended Sum of Weighted Accelerations Technique (SWAT). The second is a new approach dubbed the method of truncated orthogonal forces. These methods are much more robust if the contact patch geometry is well identified. Various approaches to identifying the contact patch are investigated, including ion marker tracking, Prussian blue and ultrasonic measurements. A typical experiment is conceived for a beam which has a lap joint at one end with a single bolt connecting it to another identical beam. In a virtual test using the beam finite element analysis, it appears that the SWAT inverse method requires evaluation of too many coefficients to adequately identify the force distribution to be viable. However, the method of truncated orthogonal forces appears viable with current digital image correlation (and probably other) imaging techniques.

  16. Accounting for radiative forcing from albedo change in future global land-use scenarios

    SciTech Connect (OSTI)

    Jones, Andrew D.; Calvin, Katherine V.; Collins, William D.; Edmonds, James A.

    2015-08-01

    We demonstrate the effectiveness of a new method for quantifying radiative forcing from land use and land cover change (LULCC) within an integrated assessment model, the Global Change Assessment Model (GCAM). The method relies on geographically differentiated estimates of radiative forcing from albedo change associated with major land cover transitions derived from the Community Earth System Model. We find that conversion of 1 km of woody vegetation (forest and shrublands) to non-woody vegetation (crops and grassland) yields between 0 and 0.71 nW/m of globally averaged radiative forcing determined by the vegetation characteristics, snow dynamics, and atmospheric radiation environment characteristic within each of 151 regions we consider globally. Across a set of scenarios designed to span a range of potential future LULCC, we find LULCC forcing ranging from 0.06 to 0.29 W/m by 2070 depending on assumptions regarding future crop yield growth and whether climate policy favors afforestation or bioenergy crops. Inclusion of this previously uncounted forcing in the policy targets driving future climate mitigation efforts leads to changes in fossil fuel emissions on the order of 1.5 PgC/yr by 2070 for a climate forcing limit of 4.5 Wm2, corresponding to a 1267 % change in fossil fuel emissions depending on the scenario. Scenarios with significant afforestation must compensate for albedo-induced warming through additional emissions reductions, and scenarios with significant deforestation need not mitigate as aggressively due to albedo-induced cooling. In all scenarios considered, inclusion of albedo forcing in policy targets increases forest and shrub cover globally.

  17. Analysis of Real Ship Rolling Dynamics under Wave Excitement Force Composed of Sums of Cosine Functions

    SciTech Connect (OSTI)

    Zhang, Y. S. [Department of Scientific Research, Dalian Naval Academy, Dalian 116018 (China); Cai, F. [Department of Navigation, Dalian Naval Academy, Dalian 116018 (China); Xu, W. M. [Department of Hydrography and Cartography, Dalian Naval Academy, Dalian 116018 (China)

    2011-09-28

    The ship motion equation with a cosine wave excitement force describes the slip moments in regular waves. A new kind of wave excitement force model, with the form as sums of cosine functions was proposed to describe ship rolling in irregular waves. Ship rolling time series were obtained by solving the ship motion equation with the fourth-order-Runger-Kutta method. These rolling time series were synthetically analyzed with methods of phase-space track, power spectrum, primary component analysis, and the largest Lyapunove exponent. Simulation results show that ship rolling presents some chaotic characteristic when the wave excitement force was applied by sums of cosine functions. The result well explains the course of ship rolling's chaotic mechanism and is useful for ship hydrodynamic study.

  18. Aerodynamic force measurement on a large-scale model in a short duration test facility

    SciTech Connect (OSTI)

    Tanno, H.; Kodera, M.; Komuro, T.; Sato, K.; Takahasi, M.; Itoh, K.

    2005-03-01

    A force measurement technique has been developed for large-scale aerodynamic models with a short test time. The technique is based on direct acceleration measurements, with miniature accelerometers mounted on a test model suspended by wires. Measuring acceleration at two different locations, the technique can eliminate oscillations from natural vibration of the model. The technique was used for drag force measurements on a 3 m long supersonic combustor model in the HIEST free-piston driven shock tunnel. A time resolution of 350 {mu}s is guaranteed during measurements, whose resolution is enough for ms order test time in HIEST. To evaluate measurement reliability and accuracy, measured values were compared with results from a three-dimensional Navier-Stokes numerical simulation. The difference between measured values and numerical simulation values was less than 5%. We conclude that this measurement technique is sufficiently reliable for measuring aerodynamic force within test durations of 1 ms.

  19. Enhancement of vortex induced forces and motion through surface roughness control

    SciTech Connect (OSTI)

    Bernitsas, Michael M.; Raghavan, Kamaldev

    2011-11-01

    Roughness is added to the surface of a bluff body in a relative motion with respect to a fluid. The amount, size, and distribution of roughness on the body surface is controlled passively or actively to modify the flow around the body and subsequently the Vortex Induced Forces and Motion (VIFM). The added roughness, when designed and implemented appropriately, affects in a predetermined way the boundary layer, the separation of the boundary layer, the level of turbulence, the wake, the drag and lift forces, and consequently the Vortex Induced Motion (VIM), and the fluid-structure interaction. The goal of surface roughness control is to increase Vortex Induced Forces and Motion. Enhancement is needed in such applications as harnessing of clean and renewable energy from ocean/river currents using the ocean energy converter VIVACE (Vortex Induced Vibration for Aquatic Clean Energy).

  20. Liquid contact resonance atomic force microscopy via experimental reconstruction of the hydrodynamic function

    SciTech Connect (OSTI)

    Tung, Ryan C. Killgore, Jason P.; Hurley, Donna C.

    2014-06-14

    We present a method to correct for surface-coupled inertial and viscous fluid loading forces in contact resonance (CR) atomic force microscopy (AFM) experiments performed in liquid. Based on analytical hydrodynamic theory, the method relies on experimental measurements of the AFM cantilever's free resonance peaks near the sample surface. The free resonance frequencies and quality factors in both air and liquid allow reconstruction of a continuous hydrodynamic function that can be used to adjust the CR data in liquid. Validation experiments utilizing thermally excited free and in-contact spectra were performed to assess the accuracy of our approach. Results show that the method recovers the air frequency values within approximately 6%. Knowledge of fluid loading forces allows current CR analysis techniques formulated for use in air and vacuum environments to be applied to liquid environments. Our technique greatly extends the range of measurement environments available to CR-AFM.

  1. Reduction of vortex induced forces and motion through surface roughness control

    DOE Patents [OSTI]

    Bernitsas, Michael M; Raghavan, Kamaldev

    2014-04-01

    Roughness is added to the surface of a bluff body in a relative motion with respect to a fluid. The amount, size, and distribution of roughness on the body surface is controlled passively or actively to modify the flow around the body and subsequently the Vortex Induced Forces and Motion (VIFM). The added roughness, when designed and implemented appropriately, affects in a predetermined way the boundary layer, the separation of the boundary layer, the level of turbulence, the wake, the drag and lift forces, and consequently the Vortex Induced Motion (VIM), and the fluid-structure interaction. The goal of surface roughness control is to decrease/suppress Vortex Induced Forces and Motion. Suppression is required when fluid-structure interaction becomes destructive as in VIM of flexible cylinders or rigid cylinders on elastic support, such as underwater pipelines, marine risers, tubes in heat exchangers, nuclear fuel rods, cooling towers, SPAR offshore platforms.

  2. Surface Polarity Of Beta-hmx Crystal And The Related Adhesive Forces With Estane Binder

    SciTech Connect (OSTI)

    Yang, Lu; Hanson, David E

    2008-01-01

    Here we present the results on the study of surface properties of {beta}-HMX crystal utilizing molecular simulations. The surface polarity of three principal crystal surfaces are investigated by measuring the water contact angles. The calculated contact angles agree excellently with the values measured by experiment and show that the surface polarity of three crystal surfaces are different. The free energies and forces of detaching an Estane chain with and without nitroplasticizer from the three principal crystal surfaces were calculated using umbrella sampling technique. We find that the detaching free energy/force increases with the increasing HMX surface polarity. In addition, our results also show that nitroplasticizer plays an important role in the adhesion forces between Estane and HMX surfaces.

  3. Double-sided electromagnetic pump with controllable normal force for rapid solidification of liquid metals

    DOE Patents [OSTI]

    Kuznetsov, Stephen B. (Pittsburgh, PA)

    1987-01-01

    A system for casting liquid metals is provided with an electromagnetic pump which includes a pair of primary blocks each having a polyphase winding and being positioned to form a gap through which a movable conductive heat sink passes. A solidifying liquid metal sheet is deposited on the heat sink and the heat sink and sheet are held in compression by forces produced as a result of current flow through the polyphase windings. Shaded-pole interaction between the primary windings, heat sink and solidifying strip produce transverse forces which act to center the strip on the heat sink.

  4. Double-sided electromagnetic pump with controllable normal force for rapid solidification of liquid metals

    DOE Patents [OSTI]

    Kuznetsov, S.B.

    1987-01-13

    A system for casting liquid metals is provided with an electromagnetic pump which includes a pair of primary blocks each having a polyphase winding and being positioned to form a gap through which a movable conductive heat sink passes. A solidifying liquid metal sheet is deposited on the heat sink and the heat sink and sheet are held in compression by forces produced as a result of current flow through the polyphase windings. Shaded-pole interaction between the primary windings, heat sink and solidifying strip produce transverse forces which act to center the strip on the heat sink. 5 figs.

  5. Multi-Axis Foot Reaction Force/Torque Sensor for Biomedical Applications

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Conference: Multi-Axis Foot Reaction Force/Torque Sensor for Biomedical Applications Citation Details In-Document Search Title: Multi-Axis Foot Reaction Force/Torque Sensor for Biomedical Applications No abstract prepared. Authors: Lind, Randall F [1] ; Love, Lonnie J [1] ; Rowe, John C [1] ; Pin, Francois G [1] + Show Author Affiliations ORNL [ORNL Publication Date: 2009-01-01 OSTI Identifier: 966106 DOE Contract Number: DE-AC05-00OR22725 Resource Type:

  6. Vortex motion of dust particles due to non-conservative ion drag force in a

    Office of Scientific and Technical Information (OSTI)

    plasma (Journal Article) | SciTech Connect Vortex motion of dust particles due to non-conservative ion drag force in a plasma Citation Details In-Document Search This content will become publicly available on February 12, 2017 Title: Vortex motion of dust particles due to non-conservative ion drag force in a plasma Authors: Chai, Kil-Byoung [1] Search SciTech Connect for author "Chai, Kil-Byoung" Search SciTech Connect for ORCID "0000000296339150" Search orcid.org for

  7. A two-fluid study of oblique tearing modes in a force-free current sheet

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect A two-fluid study of oblique tearing modes in a force-free current sheet Citation Details In-Document Search This content will become publicly available on January 1, 2017 Title: A two-fluid study of oblique tearing modes in a force-free current sheet Kinetic simulations have demonstrated that three-dimensional reconnection in collisionless regimes proceeds through the formation and interaction of magnetic flux ropes, which are generated due to the growth

  8. Solar Community Comes Out in Full Force for SunShot Grand Challenge Summit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Community Comes Out in Full Force for SunShot Grand Challenge Summit Solar Community Comes Out in Full Force for SunShot Grand Challenge Summit May 22, 2014 - 10:13am Addthis Packed House 1 of 12 Packed House An energetic crowd of hundreds of leaders throughout the solar community gathered for the 2014 SunShot Grand Challenge Summit to work together to reduce the costs of solar energy technologies. Image: SunShot Initiative, Energy Department. Solar Tech Forum 2 of 12

  9. The Secretary of Energy Advisory Board (SEAB) Task Force on FracFocus 2.0 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy on FracFocus 2.0 The Secretary of Energy Advisory Board (SEAB) Task Force on FracFocus 2.0 The Secretary of Energy Advisory Board (SEAB) Task Force on FracFocus 2.0 is composed of individuals with expertise and experience charged with reviewing how FracFocus 2.0 houses the information Federal and State regulatory agencies require as part of their regulatory functions with regard to disclosure of the composition and quantities of fracturing fluids injected into

  10. Conference-EC-US Task Force Joint US-EU Workshop on Metabolomics and Environmental Biotechnology

    SciTech Connect (OSTI)

    PI: Lily Y. Young; Co-PI: Gerben J. Zylstra

    2009-06-04

    Since 1990, the EC-US Task Force on Biotechnology Research has been coordinating transatlantic efforts to guide and exploit the ongoing revolution in biotechnology and the life sciences. The Task Force was established in June 1990 by the European Commission and the White House Office of Science and Technology Policy. The Task Force has acted as an effective forum for discussion, coordination, and development of new ideas for the last 18 years. Task Force members are European Commission and US Government science and technology administrators who meet annually to enhance communication across the Atlantic, and to encourage collaborative research. Through sponsoring workshops, and other activities, the Task Force also brings together scientific leaders and early career researchers from both sides of the Atlantic to forecast research challenges and opportunities and to promote better links between researchers. Over the years, by keeping a focus on the future of science, the Task Force has played a key role in establishing a diverse range of emerging scientific fields, including biodiversity research, neuroinformatics, genomics, nanobiotechnology, neonatal immunology, transkingdom molecular biology, biologically-based fuels, and environmental biotechnology. The EC-US Task Force has sponsored a number of Working Groups on topics of mutual transatlantic interest. The idea to create a Working Group on Environmental Biotechnology research was discussed in the Task Force meeting of October 1993. The EC-US Working Group on Environmental Biotechnology set as its mission 'To train the next generation of leaders in environmental biotechnology in the United States and the European Union to work collaboratively across the Atlantic.' Since 1995, the Working Group supported three kinds of activities, all of which focus one early career scientists: (1) Workshops on the use of molecular methods and genomics in environmental biotechnology; (2) Short courses with theoretical, laboratory and field elements; and (3) Short term exchange fellowships. The short term exchange fellowships were created to enable young scientists to develop collaborations with colleagues across the Atlantic and to learn a new skill or expertise in the area of environmental biotechnology.

  11. Confocal acoustic radiation force optical coherence elastography using a ring ultrasonic transducer

    SciTech Connect (OSTI)

    Qi, Wenjuan; Li, Rui; Ma, Teng; Kirk Shung, K.; Zhou, Qifa; Chen, Zhongping

    2014-03-24

    We designed and developed a confocal acoustic radiation force optical coherence elastography system. A ring ultrasound transducer was used to achieve reflection mode excitation and generate an oscillating acoustic radiation force in order to generate displacements within the tissue, which were detected using the phase-resolved optical coherence elastography method. Both phantom and human tissue tests indicate that this system is able to sense the stiffness difference of samples and quantitatively map the elastic property of materials. Our confocal setup promises a great potential for point by point elastic imaging in vivo and differentiation of diseased tissues from normal tissue.

  12. B&W Y-12 assumes responsibility for protective force | Y-12 National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Security Complex assumes ... B&W Y-12 assumes responsibility for protective force Posted: October 29, 2012 - 4:30pm B&W Y-12 has assumed responsibility for the protective force at the Y-12 National Security Complex following a four-week transition from WSI Oak Ridge, the site's former subcontractor for security. During the transition, B&W Y-12 hired more than 560 WSI Oak Ridge employees. "The transition from WSI Oak Ridge to B&W Y-12 has gone very smoothly, and we

  13. Testing for three-body quark forces in L = 1 excited baryons (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Testing for three-body quark forces in L = 1 excited baryons Citation Details In-Document Search Title: Testing for three-body quark forces in L = 1 excited baryons We discuss the matching of the quark model to the effective mass operator of the 1/N{sub c} expansion using the permutation group S{sub N}. As an illustration of the general procedure we perform the matching of the Isgur-Karl model for the spectrum of the negative parity L = 1 excited baryons. Assuming

  14. Meeting Our Partners in Saudi Arabia and U.S. Military Forces in Bahrain |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy Our Partners in Saudi Arabia and U.S. Military Forces in Bahrain Meeting Our Partners in Saudi Arabia and U.S. Military Forces in Bahrain January 26, 2015 - 1:15am Addthis Deputy Secretary of Energy Elizabeth Sherwood-Randall looks out at Dhahran, Saudi Arabia, from a helicopter en route to view the Manifa Oil Field. | Photo by Kathryn Grant, Energy Department. Deputy Secretary of Energy Elizabeth Sherwood-Randall looks out at Dhahran, Saudi Arabia, from a helicopter en

  15. Vortex motion of dust particles due to non-conservative ion drag force in a

    Office of Scientific and Technical Information (OSTI)

    plasma (Journal Article) | DOE PAGES Vortex motion of dust particles due to non-conservative ion drag force in a plasma This content will become publicly available on February 12, 2017 Title: Vortex motion of dust particles due to non-conservative ion drag force in a plasma Authors: Chai, Kil-Byoung [1] Search DOE PAGES for author "Chai, Kil-Byoung" Search DOE PAGES for ORCID "0000000296339150" Search orcid.org for ORCID "0000000296339150" ; Bellan, Paul M. [1]

  16. DOE - Office of Legacy Management -- Nellis Air Force Base - NV 04

    Office of Legacy Management (LM)

    Nellis Air Force Base - NV 04 FUSRAP Considered Sites Site: NELLIS AIR FORCE BASE (NV.04) Eliminated from consideration under FUSRAP - Referred to DOD Designated Name: Not Designated Alternate Name: Lake Meade Base NV.04-1 Location: Las Vegas , Nevada NV.04-2 Evaluation Year: 1987 NV.04-2 Site Operations: Waste disposal area for wet and dry radioactive materials. NV.04-2 NV.04-3 NV.04-1 Site Disposition: Eliminated - Referred to DOD NV.04-2 Radioactive Materials Handled: Yes Primary Radioactive

  17. DOE - Office of Legacy Management -- Air Force Plant No 36 - OH 06

    Office of Legacy Management (LM)

    Air Force Plant No 36 - OH 06 FUSRAP Considered Sites Site: AIR FORCE PLANT NO. 36 (OH.06 ) Eliminated from consideration under FUSRAP - Site referred to DOD Designated Name: Not Designated Alternate Name: General Electric Plant G.E. Evandale Plant G.E. Cincinnati Plant OH.06-1 Location: Lockland , Ohio OH.06-1 Evaluation Year: 1987 OH.06-1 Site Operations: Performed work under AEC license involving radioactive material between 1961 and 1970. OH.06-2 Site Disposition: Eliminated - Referred to

  18. Solar Community Comes Out in Full Force for SunShot Grand Challenge Summit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Solar Community Comes Out in Full Force for SunShot Grand Challenge Summit Solar Community Comes Out in Full Force for SunShot Grand Challenge Summit May 22, 2014 - 9:58am Addthis This week in sunny Anaheim, California, more than 800 solar industry leaders gathered for the 2014 SunShot Grand Challenge Summit. The Summit, launched by the Energy Department's SunShot Initiative, brings together the solar community to network, share ideas and develop strategies to make

  19. Examination of forced unsteady separated flow fields on a rotating wind turbine blade

    SciTech Connect (OSTI)

    Huyer, S. [Univ. of Colorado, Boulder, CO (US)] [Univ. of Colorado, Boulder, CO (US)

    1993-04-01

    The wind turbine industry faces many problems regarding the construction of efficient and predictable wind turbine machines. Steady state, two-dimensional wind tunnel data are generally used to predict aerodynamic loads on wind turbine blades. Preliminary experimental evidence indicates that some of the underlying fluid dynamic phenomena could be attributed to dynamic stall, or more specifically to generation of forced unsteady separated flow fields. A collaborative research effort between the University of Colorado and the National Renewable Energy Laboratory was conducted to systematically categorize the local and global effects of three- dimensional forced unsteady flow fields.

  20. protective forces

    National Nuclear Security Administration (NNSA)

    4%2A en Defense Nuclear Security http:nnsa.energy.govaboutusourprogramsnuclearsecurity

    Page...

  1. protective forces

    National Nuclear Security Administration (NNSA)

    4%2A en Defense Nuclear Security http:www.nnsa.energy.govaboutusourprogramsnuclearsecurity

  2. armed forces

    National Nuclear Security Administration (NNSA)

    organization that takes World War II, Korean War and Vietnam War veterans to the U.S. capital to see the memorials built in their honor at zero cost to the veteran.

  3. Bi-harmonic cantilever design for improved measurement sensitivity in tapping-mode atomic force microscopy

    SciTech Connect (OSTI)

    Loganathan, Muthukumaran; Bristow, Douglas A.

    2014-04-15

    This paper presents a method and cantilever design for improving the mechanical measurement sensitivity in the atomic force microscopy (AFM) tapping mode. The method uses two harmonics in the drive signal to generate a bi-harmonic tapping trajectory. Mathematical analysis demonstrates that the wide-valley bi-harmonic tapping trajectory is as much as 70% more sensitive to changes in the sample topography than the standard single-harmonic trajectory typically used. Although standard AFM cantilevers can be driven in the bi-harmonic tapping trajectory, they require large forcing at the second harmonic. A design is presented for a bi-harmonic cantilever that has a second resonant mode at twice its first resonant mode, thereby capable of generating bi-harmonic trajectories with small forcing signals. Bi-harmonic cantilevers are fabricated by milling a small cantilever on the interior of a standard cantilever probe using a focused ion beam. Bi-harmonic drive signals are derived for standard cantilevers and bi-harmonic cantilevers. Experimental results demonstrate better than 30% improvement in measurement sensitivity using the bi-harmonic cantilever. Images obtained through bi-harmonic tapping exhibit improved sharpness and surface tracking, especially at high scan speeds and low force fields.

  4. Atomic force microscope with combined FTIR-Raman spectroscopy having a micro thermal analyzer

    DOE Patents [OSTI]

    Fink, Samuel D.; Fondeur, Fernando F.

    2011-10-18

    An atomic force microscope is provided that includes a micro thermal analyzer with a tip. The micro thermal analyzer is configured for obtaining topographical data from a sample. A raman spectrometer is included and is configured for use in obtaining chemical data from the sample.

  5. Silicone oil contamination and electrical contact resistance degradation of low-force gold contacts.

    SciTech Connect (OSTI)

    Dugger, Michael Thomas; Dickrell, Daniel John, III

    2006-02-01

    Hot-switched low-force gold electrical contact testing was performed using a nanomechanical test apparatus to ascertain the sensitivity of simulated microelectromechanical systems (MEMS) contact to silicone oil contamination. The observed cyclic contact resistance degradation was dependent on both closure rate and noncontact applied voltage. The decomposition of silicone oil from electrical arcing was hypothesized as the degradation mechanism.

  6. Hydrophobic force field as molecular alternative to surface-area models

    SciTech Connect (OSTI)

    Hummer, G.

    1999-07-07

    An effective force field for hydrophobic interactions is developed based on a modified potential-of-mean-force (PMF) expansion of the effective many-body interactions between nonpolar molecules in water. For the simplest nonpolar solutes in water, hard particles, the modified PMF expansion is exact in both limiting cases of infinite separation and perfect overlap. The hydrophobic interactions are parametrized by using the information-theory model of hydrophobic hydration. The interactions between nonpolar solutes are short-ranged and can be evaluated efficiently on a computer. The force field is compared with simulation data for alkane conformational equilibria in water as well as a model for the formation of a hydrophobic core of a protein. The modified PMF expansion can be extended to solutes with attractive interactions. The observed accuracy, computational efficiency, and atomic detail of the model suggest that this simple hydrophobic force field can lead to a molecular alternative for phenomenological surface-area models with applications in ligand-binding and protein-folding studies.

  7. Standardization of Chemical Protective Equipment for Protective Forces and Special Agents

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-03-29

    This Notice provides requirements for the standardization and procurement of chemical protective equipment for use by Department of Energy (DOE) protective forces and Special Agents of the Transportation Safeguards Division (TSD). DOE N 251.40, dated 5/3/01, extends this directive until 12/31/01. Does not cancel other directives.

  8. Lateral migration of a microdroplet under optical forces in a uniform flow

    SciTech Connect (OSTI)

    Cho, Hyunjun; Chang, Cheong Bong; Jung, Jin Ho; Sung, Hyung Jin

    2014-12-15

    The behavior of a microdroplet in a uniform flow and subjected to a vertical optical force applied by a loosely focused Gaussian laser beam was studied numerically. The lattice Boltzmann method was applied to obtain the two-phase flow field, and the dynamic ray tracing method was adopted to calculate the optical force. The optical forces acting on the spherical droplets agreed well with the analytical values. The numerically predicted droplet migration distances agreed well with the experimentally obtained values. Simulations of the various flow and optical parameters showed that the droplet migration distance nondimensionalized by the droplet radius is proportional to the S number (z{sub d}/r{sub p} = 0.377S), which is the ratio of the optical force to the viscous drag. The effect of the surface tension was also examined. These results indicated that the surface tension influenced the droplet migration distance to a lesser degree than the flow and optical parameters. The results of the present work hold for the refractive indices of the mean fluid and the droplet being 1.33 and 1.59, respectively.

  9. An Energy Conservative Ray-Tracing Method With a Time Interpolation of the Force Field

    SciTech Connect (OSTI)

    Yao, Jin

    2015-02-10

    A new algorithm that constructs a continuous force field interpolated in time is proposed for resolving existing difficulties in numerical methods for ray-tracing. This new method has improved accuracy, but with the same degree of algebraic complexity compared to Kaisers method.

  10. US Air Force Launches Satellite Carrying NNSA-provided Nuclear Detonation

    National Nuclear Security Administration (NNSA)

    Detection Sensors | National Nuclear Security Administration Air Force Launches Satellite Carrying NNSA-provided Nuclear Detonation Detection Sensors | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations

  11. ProForce marks 65 years protecting Sandia resources, facilities, people |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration ProForce marks 65 years protecting Sandia resources, facilities, people | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony

  12. Thermal gradient-induced forces on geodesic reference masses for LISA

    SciTech Connect (OSTI)

    Carbone, L.; Ciani, G.; Dolesi, R.; Hueller, M.; Tombolato, D.; Vitale, S.; Weber, W. J.; Cavalleri, A.

    2007-11-15

    The low frequency sensitivity of space-borne gravitational wave observatories will depend critically on the geodesic purity of the trajectories of orbiting test masses. Fluctuations in the temperature difference across the enclosure surrounding the free-falling test mass can produce noisy forces through several processes, including the radiometric effect, radiation pressure, and outgassing. We present here a detailed experimental investigation of thermal gradient-induced forces for the Laser Interferometer Space Antenna (LISA) gravitational wave mission and the LISA Pathfinder, employing high resolution torsion pendulum measurements of the torque on a LISA-like test mass suspended inside a prototype of the LISA gravitational reference sensor that will surround the test mass in orbit. The measurement campaign, accompanied by numerical simulations of the radiometric and radiation pressure effects, allows a more accurate and representative characterization of thermal-gradient forces in the specific geometry and environment relevant to LISA free-fall. The pressure dependence of the measured torques allows clear identification of the radiometric effect, in quantitative agreement with the model developed. In the limit of zero gas pressure, the measurements are most likely dominated by outgassing, but at a low level that does not threaten the current LISA noise estimate, which assumes a maximum net force per degree of temperature difference of 100(pN/K) for the overall thermal gradient-induced effects.

  13. Method and system for measuring gate valve clearances and seating force

    DOE Patents [OSTI]

    Casada, D.A.; Haynes, H.D.; Moyers, J.C.; Stewart, B.K.

    1996-01-30

    Valve clearances and seating force, as well as other valve operational parameters, are determined by measuring valve stem rotation during opening and closing operations of a translatable gate valve. The magnitude of the stem rotation, and the relative difference between the stem rotation on opening and closing provides valuable data on the valve internals in a non-intrusive manner. 8 figs.

  14. Method and system for measuring gate valve clearances and seating force

    DOE Patents [OSTI]

    Casada, Donald A.; Haynes, Howard D.; Moyers, John C.; Stewart, Brian K.

    1996-01-01

    Valve clearances and seating force, as well as other valve operational parameters, are determined by measuring valve stem rotation during opening and closing operations of a translatable gate valve. The magnitude of the stem rotation, and the relative difference between the stem rotation on opening and closing provides valuable data on the valve internals in a non-intrusive manner.

  15. Portable dual field gradient force multichannel flow cytometer device with a dual wavelength low noise detection scheme

    DOE Patents [OSTI]

    James, Conrad D; Galambos, Paul C; Derzon, Mark S; Graf, Darin C; Pohl, Kenneth R; Bourdon, Chris J

    2012-10-23

    Systems and methods for combining dielectrophoresis, magnetic forces, and hydrodynamic forces to manipulate particles in channels formed on top of an electrode substrate are discussed. A magnet placed in contact under the electrode substrate while particles are flowing within the channel above the electrode substrate allows these three forces to be balanced when the system is in operation. An optical detection scheme using near-confocal microscopy for simultaneously detecting two wavelengths of light emitted from the flowing particles is also discussed.

  16. A simulation technique for 3D MR-guided acoustic radiation force imaging

    SciTech Connect (OSTI)

    Payne, Allison; Bever, Josh de; Farrer, Alexis; Coats, Brittany; Parker, Dennis L.; Christensen, Douglas A.

    2015-02-15

    Purpose: In magnetic resonance-guided focused ultrasound (MRgFUS) therapies, the in situ characterization of the focal spot location and quality is critical. MR acoustic radiation force imaging (MR-ARFI) is a technique that measures the tissue displacement caused by the radiation force exerted by the ultrasound beam. This work presents a new technique to model the displacements caused by the radiation force of an ultrasound beam in a homogeneous tissue model. Methods: When a steady-state point-source force acts internally in an infinite homogeneous medium, the displacement of the material in all directions is given by the Somigliana elastostatic tensor. The radiation force field, which is caused by absorption and reflection of the incident ultrasound intensity pattern, will be spatially distributed, and the tensor formulation takes the form of a convolution of a 3D Green’s function with the force field. The dynamic accumulation of MR phase during the ultrasound pulse can be theoretically accounted for through a time-of-arrival weighting of the Green’s function. This theoretical model was evaluated experimentally in gelatin phantoms of varied stiffness (125-, 175-, and 250-bloom). The acoustic and mechanical properties of the phantoms used as parameters of the model were measured using independent techniques. Displacements at focal depths of 30- and 45-mm in the phantoms were measured by a 3D spin echo MR-ARFI segmented-EPI sequence. Results: The simulated displacements agreed with the MR-ARFI measured displacements for all bloom values and focal depths with a normalized RMS difference of 0.055 (range 0.028–0.12). The displacement magnitude decreased and the displacement pattern broadened with increased bloom value for both focal depths, as predicted by the theory. Conclusions: A new technique that models the displacements caused by the radiation force of an ultrasound beam in a homogeneous tissue model theory has been rigorously validated through comparison with experimentally obtained 3D displacement data in homogeneous gelatin phantoms using a 3D MR-ARFI sequence. The agreement of the experimentally measured and simulated results demonstrates the potential to use MR-ARFI displacement data in MRgFUS therapies.

  17. Mountain Home Air Force Base, Idaho Geothermal Resource Assessment and Future Recommendations

    SciTech Connect (OSTI)

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2013-03-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base in early 2011 near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home Air Force Base. In conclusion, Recommendation for follow-up efforts include the following:

  18. Rotor whirl forces induced by the tip clearance effect in axial flow compressors

    SciTech Connect (OSTI)

    Ehrich, F. )

    1993-10-01

    It is now widely recognized that destabilizing forces, tending to generate forward rotor whirl, are generated in axial flow turbines as a result of the nonuniform torque induced by the nonuniform tip-clearance in a deflected rotor--the so called Thomas/Alford force. It is also recognized that there will be a similar effect in axial flow compressors, but qualitative considerations cannot definitively establish the magnitude or even the direction of the induced whirling forces--that is, if they will tend to forward or backward whirl. Applying a parallel compressor model to simulate the operation of a compressor rotor deflected radially in its clearance, it is possible to derive a quantitative estimate of the proportionality factor [beta] which relates the Thomas/Alford force in axial flow compressors (i.e., the tangential force generated by a radial deflection of the rotor) to the torque level in the compressor. The analysis makes use of experimental data from the GE Aircraft Engines Low Speed Research Compressor facility comparing the performance of three different axial flow compressors, each with four stages (typical of a mid-block of an aircraft gas turbine compressor) at two different clearances. It is found that the value of [beta] is in the range of +0.27 to [minus]0.71 in the vicinity of the stages' nominal operating line and +0.08 to [minus]1.25 in the vicinity of the stages' operation at peak efficiency. The value of [beta] reaches a level of between [minus]1.16 and [minus]3.36 as the compressor is operated near its stalled condition.

  19. Radiative forcing and temperature response to changes in urban albedos and associated CO2 offsets

    SciTech Connect (OSTI)

    Menon, Surabi; Akbari, Hashem; Mahanama, Sarith; Sednev, Igor; Levinson, Ronnen

    2010-02-12

    The two main forcings that can counteract to some extent the positive forcings from greenhouse gases from pre-industrial times to present-day are the aerosol and related aerosol-cloud forcings, and the radiative response to changes in surface albedo. Here, we quantify the change in radiative forcing and land surface temperature that may be obtained by increasing the albedos of roofs and pavements in urban areas in temperate and tropical regions of the globe by 0.1. Using the catchment land surface model (the land model coupled to the GEOS-5 Atmospheric General Circulation Model), we quantify the change in the total outgoing (outgoing shortwave+longwave) radiation and land surface temperature to a 0.1 increase in urban albedos for all global land areas. The global average increase in the total outgoing radiation was 0.5 Wm{sup -2}, and temperature decreased by {approx}0.008 K for an average 0.003 increase in surface albedo. These averages represent all global land areas where data were available from the land surface model used and are for the boreal summer (June-July-August). For the continental U.S. the total outgoing radiation increased by 2.3 Wm{sup -2}, and land surface temperature decreased by {approx}0.03 K for an average 0.01 increase in surface albedo. Based on these forcings, the expected emitted CO{sub 2} offset for a plausible 0.25 and 0.15 increase in albedos of roofs and pavements, respectively, for all global urban areas, was found to be {approx} 57 Gt CO{sub 2}. A more meaningful evaluation of the impacts of urban albedo increases on global climate and the expected CO{sub 2} offsets would require simulations which better characterizes urban surfaces and represents the full annual cycle.

  20. Simulation of aerosol direct radiative forcing with RAMS-CMAQ in East Asia

    SciTech Connect (OSTI)

    Han, Xiao; Zhang, Meigen; Han, Zhiewi; Xin, Jin-Yuan; Liu, Xiaohong

    2011-11-14

    The air quality modeling system RAMS-CMAQ is developed to assess aerosol direct radiative forcing by linking simulated meteorological parameters and aerosol mass concentration with the aerosol optical properties/radiative transfer module in this study. The module is capable of accounting for important factors that affect aerosol optical properties and radiative effect, such as incident wave length, aerosol size distribution, water uptake, and internal mixture. Subsequently, the modeling system is applied to simulate the temporal and spatial variations in mass burden, optical properties, and direct radiative forcing of diverse aerosols, including sulfate, nitrate, ammonium, black carbon, organic carbon, dust, and sea salt over East Asia throughout 2005. Model performance is fully evaluated using various observational data, including satellite monitoring of MODIS and surface measurements of EANET (Acid Deposition Monitoring Network), AERONET (Aerosol Robotic Network), and CSHNET (Chinese Sun Hazemeter Network). The correlation coefficients of the comparisons of daily average mass concentrations of sulfate, PM2.5, and PM10 between simulations and EANET measurements are 0.70, 0.61, and 0.64, respectively. It is also determined that the modeled aerosol optical depth (AOD) is in congruence with the observed results from the AERONET, the CSHNET, and the MODIS. The model results suggest that the high AOD values ranging from 0.8 to 1.2 are mainly distributed over the Sichuan Basin as well as over central and southeastern China, in East Asia. The aerosol direct radiative forcing patterns generally followed the AOD patterns. The strongest forcing effect ranging from -12 to -8 W m-2 was mainly distributed over the Sichuan Basin and the eastern China's coastal regions in the all-sky case at TOA, and the forcing effect ranging from -8 to -4 W m-2 could be found over entire eastern China, Korea, Japan, East China Sea, and the sea areas of Japan

  1. An improved DNA force field for ssDNA interactions with gold nanoparticles

    SciTech Connect (OSTI)

    Jiang, Xiankai; Huai, Ping; Fan, Chunhai; Song, Bo E-mail: bosong@sinap.ac.cn; Gao, Jun; Huynh, Tien; Zhou, Ruhong E-mail: bosong@sinap.ac.cn

    2014-06-21

    The widespread applications of single-stranded DNA (ssDNA) conjugated gold nanoparticles (AuNPs) have spurred an increasing interest in the interactions between ssDNA and AuNPs. Despite extensive studies using the most sophisticated experimental techniques, the detailed molecular mechanisms still remain largely unknown. Large scale molecular dynamics (MD) simulations can thus be used to supplement experiments by providing complementary information about ssDNA-AuNP interactions. However, up to now, all modern force fields for DNA were developed based on the properties of double-stranded DNA (dsDNA) molecules, which have hydrophilic outer backbones protecting hydrophobic inner nucleobases from water. Without the double-helix structure of dsDNA and thus the protection by the outer backbone, the nucleobases of ssDNA are directly exposed to solvent, and their behavior in water is very different from that of dsDNA, especially at the interface with nanoparticles. In this work, we have improved the force field of ssDNA for use with nanoparticles, such as AuNPs, based on recent experimental results and quantum mechanics calculations. With the new improved force field, we demonstrated that a poly(A) sequence adsorbed on a AuNP surface is much more stable than a poly(T) sequence, which is consistent with recent experimental observations. On the contrary, the current standard force fields, including AMBER03, CHARMM27, and OPLSAA, all gave erroneous results as compared to experiments. The current improved force field is expected to have wide applications in the study of ssDNA with nanomaterials including AuNPs, which might help promote the development of ssDNA-based biosensors and other bionano-devices.

  2. Physical mechanisms of megahertz vibrations and nonlinear detection in ultrasonic force and related microscopies

    SciTech Connect (OSTI)

    Bosse, J. L.; Huey, B. D.; Tovee, P. D.; Kolosov, O. V.

    2014-04-14

    Use of high frequency (HF) vibrations at MHz frequencies in Atomic Force Microscopy (AFM) advanced nanoscale property mapping to video rates, allowed use of cantilever dynamics for mapping nanomechanical properties of stiff materials, sensing ?s time scale phenomena in nanostructures, and enabled detection of subsurface features with nanoscale resolution. All of these methods critically depend on the generally poor characterized HF behaviour of AFM cantilevers in contact with a studied sample, spatial and frequency response of piezotransducers, and transfer of ultrasonic vibrations between the probe and a specimen. Focusing particularly on Ultrasonic Force Microscopy (UFM), this work is also applicable to waveguide UFM, heterodyne force microscopy, and near-field holographic microscopy, all methods that exploit nonlinear tip-surface force interactions at high frequencies. Leveraging automated multidimensional measurements, spectroscopic UFM (sUFM) is introduced to investigate a range of common experimental parameters, including piezotransducer excitation frequency, probed position, ultrasonic amplitude, cantilever geometry, spring constant, and normal force. Consistent with studies of influence of each of these factors, the data-rich sUFM signatures allow efficient optimization of ultrasonic-AFM based measurements, leading to best practices recommendations of using longer cantilevers with lower fundamental resonance, while at the same time increasing the central frequency of HF piezo-actuators, and only comparing results within areas on the order of few ?m{sup 2} unless calibrated directly or compared with in-the-imaged area standards. Diverse materials such as Si, Cr, and photoresist are specifically investigated. This work thereby provides essential insight into the reliable use of MHz vibrations with AFM and provides direct evidence substantiating phenomena such as sensitivity to adhesion, diminished friction for certain ultrasonic conditions, and the particular benefit of UFM and related methods for nanoscale mapping of stiff materials.

  3. Multi-dimensional modelling of electrostatic force distance curve over dielectric surface: Influence of tip geometry and correlation with experiment

    SciTech Connect (OSTI)

    Boularas, A. Baudoin, F.; Villeneuve-Faure, C.; Clain, S.; Teyssedre, G.

    2014-08-28

    Electric Force-Distance Curves (EFDC) is one of the ways whereby electrical charges trapped at the surface of dielectric materials can be probed. To reach a quantitative analysis of stored charge quantities, measurements using an Atomic Force Microscope (AFM) must go with an appropriate simulation of electrostatic forces at play in the method. This is the objective of this work, where simulation results for the electrostatic force between an AFM sensor and the dielectric surface are presented for different bias voltages on the tip. The aim is to analyse force-distance curves modification induced by electrostatic charges. The sensor is composed by a cantilever supporting a pyramidal tip terminated by a spherical apex. The contribution to force from cantilever is neglected here. A model of force curve has been developed using the Finite Volume Method. The scheme is based on the Polynomial Reconstruction OperatorPRO-scheme. First results of the computation of electrostatic force for different tipsample distances (from 0 to 600?nm) and for different DC voltages applied to the tip (6 to 20?V) are shown and compared with experimental data in order to validate our approach.

  4. Integration of a Self-Coherence Algorithm into DISAT for Forced Oscillation Detection

    SciTech Connect (OSTI)

    Follum, James D.; Tuffner, Francis K.; Amidan, Brett G.

    2015-03-03

    With the increasing number of phasor measurement units on the power system, behaviors typically not observable on the power system are becoming more apparent. Oscillatory behavior on the power system, notably forced oscillations, are one such behavior. However, the large amounts of data coming from the PMUs makes manually detecting and locating these oscillations difficult. To automate portions of the process, an oscillation detection routine was coded into the Data Integrity and Situational Awareness Tool (DISAT) framework. Integration into the DISAT framework allows forced oscillations to be detected and information about the event provided to operational engineers. The oscillation detection algorithm integrates with the data handling and atypical data detecting capabilities of DISAT, building off of a standard library of functions. This report details that integration with information on the algorithm, some implementation issues, and some sample results from the western United States power grid.

  5. Influence of ponderomotive force on the microwave and plasma interaction in an elliptical waveguide

    SciTech Connect (OSTI)

    Abdoli-Arani, A., E-mail: abdoliabbas@kashanu.ac.ir [Department of Photonics, Faculty of Physics, University of Kashan, Kashan, Islamic Republic of Iran (Iran, Islamic Republic of)

    2014-02-15

    The interaction effect of a high-power microwave with the plasma in an elliptical waveguide taking into account the ponderomotive force is presented. Here, we assume the fundamental mode that propagates in an evacuated elliptical waveguide and encounters a plasma, which is filled in another elliptical waveguide of the same size. Here, we consider a balance between the effects of ponderomotive force and the electron pressure and consider the plasma effect through its dielectric permittivity because the electron density distribution of the plasma is modified. The propagation of the mode is described by two nonlinear coupled differential equations obtained using the Maxwell's equations. These equations are solved numerically using fourth order Runge-Kutta method for the field amplitude of the microwave in the waveguide considering the waveguide to be made up of a perfect conductor and filled with homogeneous plasma density distribution. The effects of the electron temperature, the microwave filed, and the frequency on the perturbed density profile are studied.

  6. Single-molecule dynamic force spectroscopy of the fibronectin-heparin interaction

    SciTech Connect (OSTI)

    Mitchell, Gabriel; Lamontagne, Charles-Antoine; Lebel, Rejean; Grandbois, Michel Malouin, Francois

    2007-12-21

    The integrity of cohesive tissues strongly depends on the presence of the extracellular matrix, which provides support and anchorage for cells. The fibronectin protein and the heparin-like glycosaminoglycans are key components of this dynamic structural network. In this report, atomic force spectroscopy was used to gain insight into the compliance and the resistance of the fibronectin-heparin interaction. We found that this interaction can be described by an energetic barrier width of 3.1 {+-} 0.2 A and an off-rate of 0.2 {+-} 0.1 s{sup -1}. These dissociation parameters are similar to those of other carbohydrate-protein interactions and to off-rate values reported for more complex interactions between cells and extracellular matrix components. Our results indicate that the function of the fibronectin-heparin interaction is supported by its capacity to sustain significant deformations and considerable external mechanical forces.

  7. Electrostatic microvalves utilizing conductive nanoparticles for improved speed, lower power, and higher force actuation.

    SciTech Connect (OSTI)

    Ten Eyck, Gregory A.; Branson, Eric D.; Kenis, Paul J. A.; Desai, Amit; Schudel, Ben; Givler, Richard C.; Tice, Josh; Collord, Andrew; Apblett, Christopher Alan; Cook, Adam W.

    2009-09-01

    We have designed and built electrostatically actuated microvalves compatible with integration into a PDMS based microfluidic system. The key innovation for electrostatic actuation was the incorporation of carbon nanotubes into the PDMS valve membrane, allowing for electrostatic charging of the PDMS layer and subsequent discharging, while still allowing for significant distention of the valveseat for low voltage control of the system. Nanoparticles were applied to semi-cured PDMS using a stamp transfer method, and then cured fully to make the valve seats. DC actuation in air of these valves yielded operational voltages as low as 15V, by using a supporting structure above the valve seat that allowed sufficient restoring forces to be applied while not enhancing actuation forces to raise the valve actuation potential. Both actuate to open and actuate to close valves have been demonstrated, and integrated into a microfluidic platform, and demonstrated fluidic control using electrostatic valves.

  8. Analytic cubic and quartic force fields using density-functional theory

    SciTech Connect (OSTI)

    Ringholm, Magnus; Gao, Bin; Thorvaldsen, Andreas J.; Ruud, Kenneth; Jonsson, Dan; High Performance Computing Group, University of TromsThe Arctic University of Norway, 9037 Troms ; Bast, Radovan; Ekstrm, Ulf; Helgaker, Trygve

    2014-01-21

    We present the first analytic implementation of cubic and quartic force constants at the level of KohnSham density-functional theory. The implementation is based on an open-ended formalism for the evaluation of energy derivatives in an atomic-orbital basis. The implementation relies on the availability of open-ended codes for evaluation of one- and two-electron integrals differentiated with respect to nuclear displacements as well as automatic differentiation of the exchangecorrelation kernels. We use generalized second-order vibrational perturbation theory to calculate the fundamental frequencies of methane, ethane, benzene, and aniline, comparing B3LYP, BLYP, and HartreeFock results. The HartreeFock anharmonic corrections agree well with the B3LYP corrections when calculated at the B3LYP geometry and from B3LYP normal coordinates, suggesting that the inclusion of electron correlation is not essential for the reliable calculation of cubic and quartic force constants.

  9. Tip radius preservation for high resolution imaging in amplitude modulation atomic force microscopy

    SciTech Connect (OSTI)

    Ramos, Jorge R.

    2014-07-28

    The acquisition of high resolution images in atomic force microscopy (AFM) is correlated to the cantilever's tip shape, size, and imaging conditions. In this work, relative tip wear is quantified based on the evolution of a direct experimental observable in amplitude modulation atomic force microscopy, i.e., the critical amplitude. We further show that the scanning parameters required to guarantee a maximum compressive stress that is lower than the yield/fracture stress of the tip can be estimated via experimental observables. In both counts, the optimized parameters to acquire AFM images while preserving the tip are discussed. The results are validated experimentally by employing IgG antibodies as a model system.

  10. A novel self-sensing technique for tapping-mode atomic force microscopy

    SciTech Connect (OSTI)

    Ruppert, Michael G.; Moheimani, S. O. Reza

    2013-12-15

    This work proposes a novel self-sensing tapping-mode atomic force microscopy operation utilizing charge measurement. A microcantilever coated with a single piezoelectric layer is simultaneously used for actuation and deflection sensing. The cantilever can be batch fabricated with existing micro electro mechanical system processes. The setup enables the omission of the optical beam deflection technique which is commonly used to measure the cantilever oscillation amplitude. Due to the high amount of capacitive feedthrough in the measured charge signal, a feedforward control technique is employed to increase the dynamic range from less than 1 dB to approximately 35 dB. Experiments show that the conditioned charge signal achieves excellent signal-to-noise ratio and can therefore be used as a feedback signal for atomic force microscopy imaging.

  11. Alternative method to control radiative vortex forces in a magneto-optical trap

    SciTech Connect (OSTI)

    Kiersnowski, K.; Kawalec, T.; Dohnalik, T.

    2006-06-15

    We present an experimental and theoretical study of controlling the atomic spatial distributions in a magneto-optical trap (MOT). With a diaphragm we can vary the waist and power of one of the cooling laser beams and we can change parameters of large-diameter, parallelogram-shaped atomic orbits. We show that the radiative force generated by the repumping MOT laser has to be taken into consideration. Computer simulations of atomic trajectories explain the observed spatial structures, and we employ these simulations to present potential applications of controlling the diaphragm diameter as a function of time. A potential use of controlled vortex forces seems to have a great significance in recently presented important new methods to investigate cold atom collisions in the MOT, which were recently published.

  12. Source evaluation report phase 2 investigation: Limited field investigation. Final report: United States Air Force Environmental Restoration Program, Eielson Air Force Base, Alaska

    SciTech Connect (OSTI)

    Not Available

    1994-10-01

    This report describes the limited field investigation work done to address issues and answer unresolved questions regarding a collection of potential contaminant sources at Eielson Air Force Base (AFB), near Fairbanks, Alaska. These sources were listed in the Eielson AFB Federal Facility Agreement supporting the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) cleanup of the base. The limited field investigation began in 1993 to resolve all remaining technical issues and provide the data and analysis required to evaluate the environmental hazard associated with these sites. The objective of the limited field investigation was to allow the remedial project managers to sort each site into one of three categories: requiring remedial investigation/feasibility study, requiring interim removal action, or requiring no further remedial action.

  13. Geothermal exploration program, Hill Air Force Base, Davis and Weber Counties, Utah

    SciTech Connect (OSTI)

    Glenn, W.E.; Chapman, D.S.; Foley, D.; Capuano, R.M.; Cole, D.; Sibbett, B.; Ward, S.H.

    1980-03-01

    Results obtained from a program designed to locate a low- or moderate-temperature geothermal resource that might exist beneath Hill Air Force Base (AFB), Ogden, Utah are discussed. A phased exploration program was conducted at Hill AFB. Published geological, geochemical, and geophysical reports on the area were examined, regional exploration was conducted, and two thermal gradient holes were drilled. This program demonstrated that thermal waters are not present in the shallow subsurface at this site. (MHR)

  14. Exploration and Resource Assessment at Mountain Home Air Force Base, Idaho Using an Integrated Team Approach

    SciTech Connect (OSTI)

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2012-10-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home AFB.

  15. Force transduction and lipid binding in MscL: A continuum-molecular approach

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Vanegas, Juan M.; Arroyo, Marino; Fotiadis, Dimitrios

    2014-12-01

    The bacterial mechanosensitive channel MscL, a small protein mainly activated by membrane tension, is a central model system to study the transduction of mechanical stimuli into chemical signals. Mutagenic studies suggest that MscL gating strongly depends on both intra-protein and interfacial lipid-protein interactions. However, there is a gap between this detailed chemical information and current mechanical models of MscL gating. Here, we investigate the MscL bilayer-protein interface through molecular dynamics simulations, and take a combined continuum-molecular approach to connect chemistry and mechanics. We quantify the effect of membrane tension on the forces acting on the surface of the channel, andmore » identify interactions that may be critical in the force transduction between the membrane and MscL. We find that the local stress distribution on the protein surface is largely asymmetric, particularly under tension, with the cytoplasmic side showing significantly larger and more localized forces, which pull the protein radially outward. The molecular interactions that mediate this behavior arise from hydrogen bonds between the electronegative oxygens in the lipid headgroup and a cluster of positively charged lysine residues on the amphipathic S1 domain and the C-terminal end of the second trans-membrane helix. We take advantage of this strong interaction (estimated to be 10–13 kT per lipid) to actuate the channel (by applying forces on protein-bound lipids) and explore its sensitivity to the pulling magnitude and direction. We conclude by highlighting the simple motif that confers MscL with strong anchoring to the bilayer, and its presence in various integral membrane proteins including the human mechanosensitive channel K2P1 and bovine rhodopsin.« less

  16. Budget Shortfall Forces Renewable Energy Laboratory to Lay Off 32 Staff -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Releases | NREL Budget Shortfall Forces Renewable Energy Laboratory to Lay Off 32 Staff February 7, 2006 Golden, Colo. - The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) reduced its staff by 32 people today to help meet a $28 million budget shortfall. Twenty-seven are regular staff, and five are temporary employees. Of the 32, eight were research staff and 24 worked in support positions. Congressionally directed projects, or earmarks, reduced the budget

  17. Observational determination of surface radiative forcing by CO2 from 2000 to 2010

    SciTech Connect (OSTI)

    Feldman, Daniel R.; Collins, William D.; Gero, P. Johnathan; Torn, Margaret S.; Mlawer, Eli J.; Shippert, Timothy R.

    2015-02-25

    The climatic impact of CO2 and other greenhouse gases is usually quantified in terms of radiative forcing1, calculated as the difference between estimates of the Earth’s radiation field from pre-industrial and present-day concentrations of these gases. Radiative transfer models calculate that the increase in CO2 since 1750 corresponds to a global annual-mean radiative forcing at the tropopause of 1.82 ± 0.19 W m-2 (ref. 2). However, despite widespread scientific discussion and modelling of the climate impacts of well-mixed greenhouse gases, there is little direct observational evidence of the radiative impact of increasing atmospheric CO2. Here we present observationally based evidence of clear-sky CO2 surface radiative forcing that is directly attributable to the increase, between 2000 and 2010, of 22 parts per million atmospheric CO2. The time series of this forcing at the two locations—the Southern Great Plains and the North Slope of Alaska—are derived from Atmospheric Emitted Radiance Interferometer spectra3 together with ancillary measurements and thoroughly corroborated radiative transfer calculations4. The time series both show statistically significant trends of 0.2 W m-2 per decade (with respective uncertainties of ±0.06 W m-2 per decade and ±0.07 W m-2 per decade) and have seasonal ranges of 0.1–0.2 W m-2. This is approximately ten per cent of the trend in downwelling longwave radiation5, 6, 7. These results confirm theoretical predictions of the atmospheric greenhouse effect due to anthropogenic emissions, and provide empirical evidence of how rising CO2 levels, mediated by temporal variations due to photosynthesis and respiration, are affecting the surface energy balance.

  18. A quantitative quantum-chemical analysis tool for the distribution of mechanical force in molecules

    SciTech Connect (OSTI)

    Stauch, Tim; Dreuw, Andreas

    2014-04-07

    The promising field of mechanochemistry suffers from a general lack of understanding of the distribution and propagation of force in a stretched molecule, which limits its applicability up to the present day. In this article, we introduce the JEDI (Judgement of Energy DIstribution) analysis, which is the first quantum chemical method that provides a quantitative understanding of the distribution of mechanical stress energy among all degrees of freedom in a molecule. The method is carried out on the basis of static or dynamic calculations under the influence of an external force and makes use of a Hessian matrix in redundant internal coordinates (bond lengths, bond angles, and dihedral angles), so that all relevant degrees of freedom of a molecule are included and mechanochemical processes can be interpreted in a chemically intuitive way. The JEDI method is characterized by its modest computational effort, with the calculation of the Hessian being the rate-determining step, and delivers, except for the harmonic approximation, exact ab initio results. We apply the JEDI analysis to several example molecules in both static quantum chemical calculations and Born-Oppenheimer Molecular Dynamics simulations in which molecules are subject to an external force, thus studying not only the distribution and the propagation of strain in mechanically deformed systems, but also gaining valuable insights into the mechanochemically induced isomerization of trans-3,4-dimethylcyclobutene to trans,trans-2,4-hexadiene. The JEDI analysis can potentially be used in the discussion of sonochemical reactions, molecular motors, mechanophores, and photoswitches as well as in the development of molecular force probes.

  19. Development of fine-resolution analyses and expanded large-scale forcing

    Office of Scientific and Technical Information (OSTI)

    properties. Part I: Methodology and evaluation (Journal Article) | SciTech Connect I: Methodology and evaluation Citation Details In-Document Search Title: Development of fine-resolution analyses and expanded large-scale forcing properties. Part I: Methodology and evaluation We produce fine-resolution, three-dimensional fields of meteorological and other variables for the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) Southern Great Plains site. The Community Gridpoint

  20. Development of fine-resolution analyses and expanded large-scale forcing

    Office of Scientific and Technical Information (OSTI)

    properties. Part II: Scale-awareness and application to single-column model experiments (Journal Article) | SciTech Connect II: Scale-awareness and application to single-column model experiments Citation Details In-Document Search Title: Development of fine-resolution analyses and expanded large-scale forcing properties. Part II: Scale-awareness and application to single-column model experiments Fine-resolution three-dimensional fields have been produced using the Community Gridpoint

  1. Air Force Achieves Fuel Efficiency through Industry Best Practices (Brochure), Federal Energy Management Program (FEMP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    highest potential to save aviation fuel. All MAF personnel are encouraged to propose fuel savings ideas. These ideas are then processed as initiatives, assigned a primary point of contact, and routed through an analysis process to prepare the initiative for presenta- tion to the Air Force's corporate structure. The corporate structure then evaluates and determines the initiatives with the highest potential fuel savings. Fuel-saving efforts focus on six major areas: policy, planning, execution,

  2. The Secretary of Energy Advisory Board (SEAB) Task Force on Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development for Environmental Management | Department of Energy on Technology Development for Environmental Management The Secretary of Energy Advisory Board (SEAB) Task Force on Technology Development for Environmental Management While the Department's Office of Environmental Management (EM) has made significant progress in closing a number of projects, many of the most challenging projects remain and will for decades to come. Technology development for environmental management holds

  3. Audit of the management and cost of the Department of Energy`s protective forces

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    The Department of Energy`s safeguards and security program is designed to provide appropriate, efficient, and effective protection of the Department`s nuclear weapons, nuclear materials, facilities, and classified information. These items must be protected against theft, sabotage, espionage, and terrorist activity, with continuing emphasis on protection against the insider threat. The purpose of the audit was to determine if protective forces were efficiently managed and appropriately sized in light of the changing missions and current budget constraints. The authors found that the cost of physical security at some sites had grown beyond those costs incurred when the site was in full production. This increase was due to a combination of factors, including concerns about the adequacy of physical security, reactions to the increase in terrorism in the early 1980s with the possibility of hostile attacks, and the selection of security system upgrades without adequate consideration of cost effectiveness. Ongoing projects to upgrade security systems were not promptly reassessed when missions changed and levels of protection were not determined in a way which considered the attractiveness of the material being protected. The authors also noted several opportunities for the Department to improve the operational efficiency of its protective force operations, including, eluminating overtime paid to officers prior to completion of the basic 40-hour workweek, paying hourly wages of unarmed guards which are commensurate with their duties, consolidating protective force units, transferring law enforcement duties to local law agencies, eliminating or reducing paid time to exercise, and standardizing supplies and equipment used by protective force members.

  4. Measurement of interaction forces between red blood cells in aggregates by optical tweezers

    SciTech Connect (OSTI)

    Maklygin, A Yu; Priezzhev, A V; Karmenian, A; Nikitin, Sergei Yu; Obolenskii, I S; Lugovtsov, Andrei E; Kisun Li

    2012-06-30

    We have fabricated double-beam optical tweezers and demonstrated the possibility of their use for measuring the interaction forces between red blood cells (erythrocytes). It has been established experimentally that prolonged trapping of red blood cells in a tightly focused laser beam does not cause any visible changes in their shape or size. We have measured the interaction between red blood cells in the aggregate, deformed by optical tweezers.

  5. First Measurement of the Force that Makes Antimatter Stick Together | U.S.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE Office of Science (SC) First Measurement of the Force that Makes Antimatter Stick Together Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: Email Us More Information » 02.29.16 First

  6. Streamlining the Nuclear Force | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Streamlining the Nuclear Force Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) Community Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-7486 F: (301) 903-4846 E: Email Us More Information » 05.01.14 Streamlining the

  7. Multi-Dimensional Effects in Longwave Radiative Forcing of PBL Clouds

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Multi-Dimensional Effects in Longwave Radiative Forcing of PBL Clouds D. B. Mechem and Y. L. Kogan Cooperative Institute for Mesoscale Meteorological Studies University of Oklahoma Norman, Oklahoma M. Ovtchinnikov Pacific Northwest National Laboratory Richland, Washington K. F. Evans University of Colorado Boulder, Colorado A. B. Davis Los Alamos National Laboratory Los Alamos, New Mexico R. F. Cahalan National Aeronautic and Space Administration Goddard Space Flight Center Greenbelt, Maryland

  8. NREL, Industry Leaders Join Forces to Help Consumers Plug In - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL NREL, Industry Leaders Join Forces to Help Consumers Plug In Partnership with Google and providers will improve access to information about electric vehicle charging stations April 19, 2011 U.S. Department of Energy's National Renewable Energy Laboratory (NREL), Google Inc., and more than 80 leading organizations in electric vehicle (EV) deployment will collaborate to provide consumers and industry with accurate and up-to-date information on the locations of electric vehicle

  9. Multidisciplinary Design of an Innovative Natural Draft, Forced Diffusion Cookstove for Woody and Herbaceous Biomass Fuels

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multidisciplinary Design of an Innovative Natural Draft, Forced Diffusion Cookstove for Woody and Herbaceous Biomass Fuels March 26, 2015 Technology Area Review Principal Investigators: Jonathan Posner and John Kramlich University of Washington - Seattle This presentation does not contain any proprietary, confidential, or otherwise restricted information Goal Statement * Develop a natural draft cookstove that performs at the Tier 4 level for particulate matter, CO, efficiency, and safety that

  10. Soviet short-range nuclear forces: flexible response or flexible aggression. Student essay

    SciTech Connect (OSTI)

    Smith, T.R.

    1987-03-23

    This essay takes a critical look at Soviet short-range nuclear forces in an effort to identify Soviet capabilities to fight a limited nuclear war with NATO. From an analysis of Soviet military art, weapon-system capabilities and tactics, the author concludes that the Soviets have developed a viable limited-nuclear-attack option. Unless NATO reacts to this option, the limited nuclear attack may become favored Soviet option and result in the rapid defeat of NATO.

  11. Inter-atomic force constants of BaF{sub 2} by diffuse neutron scattering measurement

    SciTech Connect (OSTI)

    Sakuma, Takashi Makhsun,; Sakai, Ryutaro; Xianglian; Takahashi, Haruyuki; Basar, Khairul; Igawa, Naoki; Danilkin, Sergey A.

    2015-04-16

    Diffuse neutron scattering measurement on BaF{sub 2} crystals was performed at 10?K and 295?K. Oscillatory form in the diffuse scattering intensity of BaF{sub 2} was observed at 295?K. The correlation effects among thermal displacements of F-F atoms were obtained from the analysis of oscillatory diffuse scattering intensity. The force constants among neighboring atoms in BaF{sub 2} were determined and compared to those in ionic crystals and semiconductors.

  12. Large Eddy Simulation of PBL Stratocumulus: Comparison of Multi-Dimensional and IPA Longwave Radiative Forcing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Large-Eddy Simulation of PBL Stratocumulus: Comparison of Multi-Dimensional and IPA Longwave Radiative Forcing D. B. Mechem and Y. L. Kogan Cooperative Institute for Mesoscale Meteorological Studies University of Oklahoma Norman, Oklahoma M. Ovtchinnikov Pacific Northwest National Laboratory A. B. Davis Los Alamos National Laboratory Los Alamos, New Mexico R. R. Cahalan National Aeronautics and Space Administration Goddard Space Flight Center Greenbelt, Maryland E. E. Takara and R. G. Ellingson

  13. Inferring Cloud Feedbacks from ARM Continuous Forcing, ISCCP, and ARSCL Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inferring Cloud Feedbacks from ARM Continuous Forcing, ISCCP, and ARSCL Data A. D. Del Genio National Aeronautics and Space Administration Goddard Institute for Space Studies New York, New York A. B. Wolf and M.-S. Yao SGT Inc., Institute for Space Studies New York, New York Introduction Single Column Model (SCM) versions of parent general circulation models (GCMs), accompanied by cloud-resolving models (CRMs) that crudely resolve cloud-scale dynamics, have increasingly been used to simulate

  14. Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bringing you a prosperous future where energy is clean, abundant, reliable, and affordable Case Study Case Study Federal Energy Management Program Federal Energy Management Program Leading by example, saving energy and taxpayer dollars in federal facilities The 45 th Space Wing at Patrick Air Force Base (PAFB) is pursuing its energy goals through a partnership with Florida Power & Light (FPL). At the request of PAFB, FPL developed a base-wide comprehensive energy program that charts a course

  15. NNSA to save $7 million on electricity at Sandia, Kirtland Air Force Base

    National Nuclear Security Administration (NNSA)

    over two years | National Nuclear Security Administration save $7 million on electricity at Sandia, Kirtland Air Force Base over two years | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios

  16. NNSA, Air Force Complete Successful B61-12 Life Extension Program

    National Nuclear Security Administration (NNSA)

    Development Flight Test at Tonopah Test Range | National Nuclear Security Administration Nov 16, 2015 WASHINGTON - The National Nuclear Security Administration (NNSA) and United States Air Force completed the third development flight test of a non-nuclear B61-12 nuclear gravity bomb at Tonopah Test Range in Nevada on October 20, 2015. "This demonstration of effective end-to-end system performance under representative delivery conditions marks another 2015 achievement in the development

  17. Pantex Protective Force hailed as "well prepared, well trained" |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Protective Force hailed as "well prepared, well trained" | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact

  18. November 13 - 15, 2012 HSS Work Group Leadership Meeting Summary - Work Force Retention

    Energy Savers [EERE]

    Work Force Retention Work Group Co-Lead Telecom November 16, 2012 DRAFT Discussion Overview Purpose: This HSS Focus Group Work Group telecom was held with the Work Group Co-Leads to discuss change elements and strategic direction to support accelerated efforts to advancing progress, productivity and performance within each of the Work Groups. Although current roles within all of the Work Groups and Focus Group efforts remain the same, the addition of centralized leadership and oversight by

  19. Written Statement of Peggy Montana, Shell Downstream Quadrennial Energy Review Task Force Meeting

    Broader source: Energy.gov (indexed) [DOE]

    Written Statement of Peggy Montana, Shell Downstream Quadrennial Energy Review Task Force Meeting Enhancing Energy Infrastructure Resiliency and Addressing Vulnerabilities April 11. 2014 Good Morning. I am Peggy Montana, Executive Vice President, Pipelines and Special Projects, for Shell Downstream Inc. My previous role was EVP Supply & Distribution for Shell, and overall I have 37 years of industry experience at both the national and global level. I am testifying today on behalf of the

  20. Command and Control Architectures for Autonomous Micro-Robotic Forces - FY-2000 Project Report

    SciTech Connect (OSTI)

    Dudenhoeffer, Donald Dean

    2001-04-01

    Advances in Artificial Intelligence (AI) and micro-technologies will soon give rise to production of large-scale forces of autonomous micro-robots with systems of innate behaviors and with capabilities of self-organization and real world tasking. Such organizations have been compared to schools of fish, flocks of birds, herds of animals, swarms of insects, and military squadrons. While these systems are envisioned as maintaining a high degree of autonomy, it is important to understand the relationship of man with such machines. In moving from research studies to the practical deployment of large-scale numbers of robots, one of critical pieces that must be explored is the command and control architecture for humans to re-task and also inject global knowledge, experience, and intuition into the force. Tele-operation should not be the goal, but rather a level of adjustable autonomy and high-level control. If a herd of sheep is comparable to the collective of robots, then the human element is comparable to the shepherd pulling in strays and guiding the herd in the direction of greener pastures. This report addresses the issues and development of command and control for largescale numbers of autonomous robots deployed as a collective force.