Sample records for decc released experimental

  1. Financial analysis of experimental releases conducted at Glen Canyon Dam during water year 2011

    SciTech Connect (OSTI)

    Poch, L. A.; Veselka, T. D.; Palmer, C. S.; Loftin, S.; Osiek, B. (Decision and Information Sciences); (Western Area Power Administration)

    2012-07-16T23:59:59.000Z

    This report examines the financial implications of experimental flows conducted at the Glen Canyon Dam (GCD) in water year 2011. It is the third report in a series examining financial implications of experimental flows conducted since the Record of Decision (ROD) was adopted in February 1997 (Reclamation 1996). A report released in January 2011 examined water years 1997 to 2005 (Veselka et al. 2011), and a report released in August 2011 examined water years 2006 to 2010 (Poch et al. 2011). An experimental release may have either a positive or negative impact on the financial value of energy production. This study estimates the financial costs of experimental releases, identifies the main factors that contribute to these costs, and compares the interdependencies among these factors. An integrated set of tools was used to compute the financial impacts of the experimental releases by simulating the operation of the GCD under two scenarios, namely, (1) a baseline scenario that assumes both that operations comply with the ROD operating criteria and the experimental releases that actually took place during the study period, and (2) a 'without experiments' scenario that is identical to the baseline scenario of operations that comply with the GCD ROD, except it assumes that experimental releases did not occur. The Generation and Transmission Maximization (GTMax) model was the main simulation tool used to dispatch GCD and other hydropower plants that comprise the Salt Lake City Area Integrated Projects (SLCA/IP). Extensive data sets and historical information on SLCA/IP powerplant characteristics, hydrologic conditions, and Western Area Power Administration's (Western's) power purchase prices were used for the simulation. In addition to estimating the financial impact of experimental releases, the GTMax model was also used to gain insights into the interplay among ROD operating criteria, exceptions that were made to criteria to accommodate the experimental releases, and Western operating practices. Experimental releases conducted in water year 2011 resulted only in financial costs; the total cost of all experimental releases was about $622,000.

  2. Financial analysis of experimental releases conducted at Glen Canyon Dam during water years 2006 through 2010.

    SciTech Connect (OSTI)

    Poch, L. A.; Veselka, T. D.; Palmer, C. S.; Loftin, S.; Osiek, B. (Decision and Information Sciences); (Western Area Power Administration, Colorado River Storage Project Management Center)

    2011-08-22T23:59:59.000Z

    Because of concerns about the impact that Glen Canyon Dam (GCD) operations were having on downstream ecosystems and endangered species, the Bureau of Reclamation (Reclamation) conducted an Environmental Impact Statement (EIS) on dam operations (DOE 1996). New operating rules and management goals for GCD that had been specified in the Record of Decision (ROD) (Reclamation 1996) were adopted in February 1997. In addition to issuing new operating criteria, the ROD mandated experimental releases for the purpose of conducting scientific studies. A report released in January 2011 examined the financial implications of the experimental flows that were conducted at the GCD from 1997 to 2005. This report continues the analysis and examines the financial implications of the experimental flows conducted at the GCD from 2006 to 2010. An experimental release may have either a positive or negative impact on the financial value of energy production. This study estimates the financial costs of experimental releases, identifies the main factors that contribute to these costs, and compares the interdependencies among these factors. An integrated set of tools was used to compute the financial impacts of the experimental releases by simulating the operation of the GCD under two scenarios, namely, (1) a baseline scenario that assumes both that operations comply with the ROD operating criteria and the experimental releases that actually took place during the study period, and (2) a 'without experiments' scenario that is identical to the baseline scenario of operations that comply with the GCD ROD, except it assumes that experimental releases did not occur. The Generation and Transmission Maximization (GTMax) model was the main simulation tool used to dispatch GCD and other hydropower plants that comprise the Salt Lake City Area Integrated Projects (SLCA/IP). Extensive data sets and historical information on SLCA/IP powerplant characteristics, hydrologic conditions, and Western Area Power Administration's (Western's) power purchase prices were used for the simulation. In addition to estimating the financial impact of experimental releases, the GTMax model was also used to gain insights into the interplay among ROD operating criteria, exceptions that were made to criteria to accommodate the experimental releases, and Western operating practices. Experimental releases in some water years resulted in financial benefits to Western while others resulted in financial costs. During the study period, the total financial costs of all experimental releases were more than $4.8 million.

  3. Financial analysis of experimental releases conducted at Glen Canyon Dam during water years 1997 through 2005.

    SciTech Connect (OSTI)

    Veselka, T. D.; Poch, L. A.; Palmer, C. S.; Loftin, S.; Osiek, B.; Decision and Information Sciences; Western Area Power Administration

    2010-04-21T23:59:59.000Z

    Because of concerns about the impact that Glen Canyon Dam (GCD) operations were having on downstream ecosystems and endangered species, the Bureau of Reclamation (Reclamation) conducted an Environmental Impact Statement (EIS) on dam operations (DOE 1996). New operating rules and management goals for GCD that had been specified in the Record of Decision (ROD) (Reclamation 1996) were adopted in February 1997. In addition to issuing new operating criteria, the ROD mandated experimental releases for the purpose of conducting scientific studies. This paper examines the financial implications of the experimental flows that were conducted at the GCD from 1997 to 2005. An experimental release may have either a positive or negative impact on the financial value of energy production. This study estimates the financial costs of experimental releases, identifies the main factors that contribute to these costs, and compares the interdependencies among these factors. An integrated set of tools was used to compute the financial impacts of the experimental releases by simulating the operation of the GCD under two scenarios, namely, (1) a baseline scenario that assumes operations comply with the ROD operating criteria and experimental releases that actually took place during the study period, and (2) a ''without experiments'' scenario that is identical to the baseline scenario of operations that comply with the GCD ROD, except it assumes that experimental releases did not occur. The Generation and Transmission Maximization (GTMax) model was the main simulation tool used to dispatch GCD and other hydropower plants that comprise the Salt Lake City Area Integrated Projects (SLCA/IP). Extensive data sets and historical information on SLCA/IP power plant characteristics, hydrologic conditions, and Western Area Power Administration's (Western's) power purchase prices were used for the simulation. In addition to estimating the financial impact of experimental releases, the GTMax model was also used to gain insights into the interplay among ROD operating criteria, exceptions that were made to criteria to accommodate the experimental releases, and Western operating practices. Experimental releases in some water years resulted in financial benefits to Western while others resulted in financial costs. During the study period, the total financial costs of all experimental releases were $11.9 million.

  4. Kinetics Study of Solid Ammonia Borane Hydrogen Release – Modeling and Experimental Validation for Chemical Hydrogen Storage

    SciTech Connect (OSTI)

    Choi, Yong-Joon; Ronnebro, Ewa; Rassat, Scot D.; Karkamkar, Abhijeet J.; Maupin, Gary D.; Holladay, Jamelyn D.; Simmons, Kevin L.; Brooks, Kriston P.

    2014-02-24T23:59:59.000Z

    Ammonia borane (AB), NH3BH3, is a promising material for chemical hydrogen storage with 19.6 wt% gravimetric hydrogen capacity of which 16.2 wt% hydrogen can be utilized below 200°C. We have investigated the kinetics of hydrogen release from AB and from an AB-methyl cellulose (AB/MC) composite at temperatures of 160-300°C using both experiments and modeling. The purpose of our study was to show safe hydrogen release without thermal runaway effects and to validate system model kinetics. AB/MC released hydrogen at ~20°C lower than neat AB and at a rate that is two times faster. Based on the experimental results, the kinetics equations were revised to better represent the growth and nucleation process during decomposition of AB. We explored two different reactor concepts; Auger and fixed bed. The current Auger reactor concept turned out to not be appropriate, however, we demonstrated safe self-propagation of the hydrogen release reaction of solid AB/MC in a fixed bed reactor.

  5. Radionuclide release from spent fuel under geologic disposal conditions: An overview of experimental and theoretical work through 1985

    SciTech Connect (OSTI)

    Reimus, P.W.; Simonson, S.A.

    1988-04-01T23:59:59.000Z

    This report presents an overview of experimental and theoretical work on radionuclide release from spent fuel and uranium dioxide (UO/sub 2/) under geologic disposal conditions. The purpose of the report is to provide a source book of information that can be used to develop models that describe radionuclide release from spent fuel waste packages. Modeling activities of this nature will be conducted within the Waste Package Program (WPP) of the Department of Energy's Salt Repository Project (SRP). The topics discussed include experimental methods for investigating radionuclide release, how results have been reported from radionuclide release experiments, theoretical studies of UO/sub 2/ and actinide solubility, results of experimental studies of radionuclide release from spent fuel and UO/sub 2/ (i.e., the effects of different variables on radionuclide release), characteristics of spent fuel pertinent to radionuclide release, and status of modeling of radionuclide release from spent fuel. Appendix A presents tables of data from spent fuel radionuclide release experiments. These data have been digitized from graphs that appear in the literature. An annotated bibliography of literature on spent fuel characterization is provided in Appendix B.

  6. Revised financial analysis of experimental releases conducted at Glen Canyon Dam during water years 1997 through 2005.

    SciTech Connect (OSTI)

    Veselka, T. D.; Poch, L. A.; Palmer, C. S.; Loftin, S.; Osiek, B.; Decision and Information Sciences; Western Area Power Administration, Colorado River Storage Project Management Center

    2011-01-11T23:59:59.000Z

    Because of concerns about the impact that Glen Canyon Dam (GCD) operations were having on downstream ecosystems and endangered species, the Bureau of Reclamation (Reclamation) conducted an Environmental Impact Statement (EIS) on dam operations (DOE 1996). New operating rules and management goals for GCD that had been specified in the Record of Decision (ROD) (Reclamation 1996) were adopted in February 1997. In addition to issuing new operating criteria, the ROD mandated experimental releases for the purpose of conducting scientific studies. This paper examines the financial implications of the experimental flows that were conducted at the GCD from 1997 to 2005. An experimental release may have either a positive or negative impact on the financial value of energy production. This study estimates the financial costs of experimental releases, identifies the main factors that contribute to these costs, and compares the interdependencies among these factors. An integrated set of tools was used to compute the financial impacts of the experimental releases by simulating the operation of the GCD under two scenarios, namely, (1) a baseline scenario that assumes operations comply with the ROD operating criteria and experimental releases that actually took place during the study period, and (2) a 'without experiments' scenario that is identical to the baseline scenario of operations that comply with the GCD ROD, except it assumes that experimental releases did not occur. The Generation and Transmission Maximization (GTMax) model was the main simulation tool used to dispatch GCD and other hydropower plants that comprise the Salt Lake City Area Integrated Projects (SLCA/IP). Extensive data sets and historical information on SLCA/IP power plant characteristics, hydrologic conditions, and Western Area Power Administration's (Western's) power purchase prices were used for the simulation. In addition to estimating the financial impact of experimental releases, the GTMax model was also used to gain insights into the interplay among ROD operating criteria, exceptions that were made to criteria to accommodate the experimental releases, and Western operating practices. Experimental releases in some water years resulted in financial benefits to Western whileothers resulted in financial costs. During the study period, the total financial costs of all experimental releases were more than $23 million.

  7. Reactor Room Experimental SF6 Tests to Determine Probable Stack Activity Response to Radioactive Releases

    SciTech Connect (OSTI)

    Cooper, R.E.

    2002-08-19T23:59:59.000Z

    This study was performed to obtain information that could be useful for obtaining an early estimate of the probable total stack activity monitor response in the event of an accidental release of radioactive activity in the process room.

  8. New oil modified acrylic polymer for pH sensitive drug release: Experimental results and statistical analysis

    E-Print Network [OSTI]

    N. Panja; A. K. Chattopadhyay

    2014-12-05T23:59:59.000Z

    We report results of an experimental study, complemented by detailed statistical analysis of the experimental data, on the development of a more effective control method of drug delivery using a pH sensitive acrylic polymer. New copolymers based on acrylic acid and fatty acid are constructed from dodecyl castor oil and a tercopolymer based on methyl methacrylate, acrylic acid and acryl amide were prepared using this new approach. Water swelling characteristics of fatty acid, acrylic acid copolymer and tercopolymer respectively in acid and alkali solutions have been studied by a step-change method. The antibiotic drug cephalosporin and paracetamol have also been incorporated into the polymer blend through dissolution with the release of the antibiotic drug being evaluated in bacterial stain media and buffer solution. Our results show that the rate of release of paracetamol getss affected by the pH factor and also by the nature of polymer blend. Our experimental data have later been statistically analyzed to quantify the precise nature of polymer decay rates on the pH density of the relevant polymer solvents. The time evolution of the polymer decay rates indicate a marked transition from a linear to a strictly non-linear regime depending on the whether the chosen sample is a general copolymer (linear) or a tercopolymer (non-linear). Non-linear data extrapolation techniques have been used to make probabilistic predictions about the variation in weight percentages of retained polymers at all future times, thereby quantifying the degree of efficacy of the new method of drug delivery.

  9. Experimental and computational investigations of therapeutic drug release from biodegradable poly(lactide-co-glycolide) (plg) microspheres

    E-Print Network [OSTI]

    Berchane, Nader Samir

    2009-05-15T23:59:59.000Z

    The need to tailor release-rate profiles from polymeric microspheres remains one of the leading challenges in controlled drug delivery. Microsphere size, which has a significant effect on drug release rate, can potentially be varied to design a...

  10. Mechanisms of gas retention and release: Experimental results for Hanford waste tanks 241-AW-101 and 241-AN-103

    SciTech Connect (OSTI)

    Rassat, S.D.; Gauglitz, P.A.; Bredt, P.R.; Mahoney, L.A.; Forbes, S.V.; Tingey, S.M.

    1997-09-01T23:59:59.000Z

    The 177 storage tanks at Hanford contain a vast array of radioactive waste forms resulting, primarily, from nuclear materials processing. Through radiolytic, thermal, and other decomposition reactions of waste components, gaseous species including hydrogen, ammonia, and the oxidizer nitrous oxide are generated within the waste tanks. Many of these tanks are known to retain and periodically release quantities of these flammable gas mixtures. The primary focus of the Flammable Gas Project is the safe storage of Hanford tank wastes. To this end, we strive to develop an understanding of the mechanisms of flammable gas retention and release in Hanford tanks through laboratory investigations on actual tank wastes. These results support the closure of the Flammable Gas Unreviewed Safety Question (USQ) on the safe storage of waste tanks known to retain flammable gases and support resolution of the broader Flammable Gas Safety Issue. The overall purpose of this ongoing study is to develop a comprehensive and thorough understanding of the mechanisms of flammable gas retention and release. The first objective of the current study was to classify bubble retention and release mechanisms in two previously untested waste materials from Tanks 241-AN-103 (AN-103) and 241-AW-101 (AW-101). Results were obtained for retention mechanisms, release characteristics, and the maximum gas retention. In addition, unique behavior was also documented and compared with previously studied waste samples. The second objective was to lengthen the duration of the experiments to evaluate the role of slowing bubble growth on the retention and release behavior. Results were obtained for experiments lasting from a few hours to a few days.

  11. News Release FOR IMMEDIATE RELEASE

    E-Print Network [OSTI]

    Acton, Scott

    News Release FOR IMMEDIATE RELEASE May 9, 2014 For more information, contact Cindy S. Roberts Cindy.Roberts@dars.virginia.gov (540) 470-8556 or Betsy McElfresh Betsy.McElfresh@dars.virginia.gov (804) 662-7532 HERSHEY'S HR. The event, hosted by DARS' Shenandoah Valley regional field offices, will honor Hershey's and other area

  12. Experimental determination of the speciation, partitioning, and release of perrhenate as a chemical surrogate for pertechnetate from a sodalite-bearing multiphase ceramic waste form

    SciTech Connect (OSTI)

    Pierce, Eric M.; Lukens, Wayne W.; Fitts, Jeff. P.; Jantzen, Carol. M.; Tang, G.

    2013-12-01T23:59:59.000Z

    A key component to closing the nuclear fuel cycle is the storage and disposition of nuclear waste in geologic systems. Multiphase ceramic waste forms have been studied extensively as a potential host matrix for nuclear waste. Understanding the speciation, partitioning, and release behavior of radionuclides immobilized in multiphase ceramic waste forms is a critical aspect of developing the scientific and technical basis for nuclear waste management. In this study, we evaluated a sodalite-bearing multiphase ceramic waste form (i.e., fluidized-bed steam reform sodium aluminosilicate [FBSR NAS] product) as a potential host matrix for long-lived radionuclides, such as technetium (99Tc). The FBSR NAS material consists primarily of nepheline (ideally NaAlSiO4), anion-bearing sodalites (ideally M8[Al6Si6O24]X2, where M refers to alkali and alkaline earth cations and X refers to monovalent anions), and nosean (ideally Na8[AlSiO4]6SO4). Bulk X-ray absorption fine structure analysis of the multiphase ceramic waste form, suggest rhenium (Re) is in the Re(VII) oxidation state and has partitioned to a Re-bearing sodalite phase (most likely a perrhenate sodalite Na8[Al6Si6O24](ReO4)2). Rhenium was added as a chemical surrogate for 99Tc during the FBSR NAS synthesis process. The weathering behavior of the FBSR NAS material was evaluated under hydraulically unsaturated conditions with deionized water at 90 ?C. The steady-state Al, Na, and Si concentrations suggests the weathering mechanisms are consistent with what has been observed for other aluminosilicate minerals and include a combination of ion exchange, network hydrolysis, and the formation of an enriched-silica surface layer or phase. The steady-state S and Re concentrations are within an order of magnitude of the nosean and perrhenate sodalite solubility, respectively. The order of magnitude difference between the observed and predicted concentration for Re and S may be associated with the fact that the anion-bearing sodalites contained in the multiphase ceramic matrix are present as mixed-anion sodalite phases. These results suggest the multiphase FBSR NAS material may be a viable host matrix for long-lived, highly mobilie radionuclides which is a critical aspect in the management of nuclear waste.

  13. Experimental Determination of the Speciation, Partitioning, and Release of Perrhenate as a Chemical Surrogate for Pertechnetate from a Sodalite-Bearing Multiphase Ceramic Waste Form

    SciTech Connect (OSTI)

    Pierce, Eric M [ORNL] [ORNL; Lukens, Wayne W [Lawrence Berkeley National Laboratory (LBNL)] [Lawrence Berkeley National Laboratory (LBNL); Fitts, Jeffrey P [Princeton University] [Princeton University; Tang, Guoping [ORNL] [ORNL; Jantzen, C M [Savannah River National Laboratory (SRNL)] [Savannah River National Laboratory (SRNL)

    2013-01-01T23:59:59.000Z

    A key component to closing the nuclear fuel cycle is the storage and disposition of nuclear waste in geologic systems. Multiphase ceramic waste forms have been studied extensively as a potential host matrix for nuclear waste. Understanding the speciation, partitioning, and release behavior of radionuclides immobilized in multiphase ceramic waste forms is a critical aspect of developing the scientific and technical basis for nuclear waste management. In this study, we evaluated a sodalite-bearing multiphase ceramic waste form (i.e., fluidized-bed steam reform sodium aluminosilicate [FBSR NAS] product) as a potential host matrix for long-lived radionuclides, such as technetium (99Tc). The FBSR NAS material consists primarily of nepheline (ideally NaAlSiO4), anion-bearing sodalites (ideally M8[Al6Si6O24]X2, where M refers to alkali and alkaline earth cations and X refers to monovalent anions), and nosean (ideally Na8[AlSiO4]6SO4). Bulk x-ray absorption fine structure analysis of the multiphase ceramic waste form, suggest rhenium (Re) is in the Re(VII) oxidation state and has partitioned to a Re-bearing sodalite phase (most likely a perrhenate sodalite Na8[Al6Si6O24](ReO4)2). Rhenium was added as a chemical surrogate for 99Tc during the FBSR NAS synthesis process. The weathering behavior of the FBSR NAS material was evaluated under hydraulically unsaturated conditions with deionized water at 90 C. The steady-state Al, Na, and Si concentrations suggests the weathering mechanisms are consistent with what has been observed for other aluminosilicate minerals and include a combination of ion exchange, network hydrolysis, and the formation of an enriched-silica surface layer or phase. The steady-state S and Re concentrations are within an order of magnitude of the nosean and perrhenate sodalite solubility, respectively. The order of magnitude difference between the observed and predicted concentration for Re and S may be associated with the fact that the anion-bearing sodalites contained in the multiphase ceramic matrix are present as mixed-anion sodalite phases. These results suggest the multiphase FBSR NAS material may be a viable host matrix for long-lived, highly mobilie radionuclides which is a critical aspect in the management of nuclear waste.

  14. News Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > The EnergyCenterDioxideDocumentationThreeNews Releases

  15. Press Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear AstrophysicsPayroll,PhysicsPoweringEnrichmentUserKitReleases

  16. NEWS RELEASE For Immediate Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Saleshttp://www.fnal.gov/directorate/nalcal/nalcal02_07_05_files/nalcal.gif Directorate1, Issue 23 NETL NEVIS- 97NEWS RELEASE For

  17. Design, construction and testing of a release actuator for the Planar Articulating Controls Experiment

    E-Print Network [OSTI]

    Romero, Ignacio

    1994-01-01T23:59:59.000Z

    This thesis presents a release actuator for the Planar Articulating Controls Experiment (PACE), the USAF Phillips Laboratory, Edwards AFB, CA. A release actuator needs to incorporated into the experimental hardware to hold the flexible test article...

  18. 2011 Guidelines to Defra / DECC's GHG Conversion Factors for Company Reporting Produced by AEA for the Department of Energy and Climate Change (DECC)

    E-Print Network [OSTI]

    that allows the global warming potential of different GHGs to be compared. Values for CH4 and N2O are presented as CO2 equivalents (CO2e) using Global Warming Potential (GWP) factors*, consistent with reporting resulting from electricity supplied to the consumer that are counted in both Scope 2 (electricity GENERATED

  19. 2009 Guidelines to Defra / DECC's GHG Conversion Factors for Company Reporting Produced by AEA for the Department of Energy and Climate Change (DECC)

    E-Print Network [OSTI]

    , emissions factors have only been provided for CO2. The 2009 update provides emissions factors for the non-CO to landfill) into kilograms of carbon dioxide equivalent (CO2eq). Carbon dioxide equivalent is a universal and refrigeration have been added. v. International electricity emission factors have been added Major changes

  20. Potential Release Sites

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    found. Some examples of potential release sites include septic tanks and associated drain lines chemical storage areas wastewater outfalls material disposal areas incinerators...

  1. RMOTC - News - Press Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the performance of its Applied Oil Technology (AOT(tm)) in reducing crude oil's viscosity to lower transportation costs (PDF) June 2011 | Press Releases Geothermal research...

  2. Accidental Release Program (Delaware)

    Broader source: Energy.gov [DOE]

    The Delaware Accidental Release Prevention Regulation contains requirements for owners or operators of stationary sources having regulated extremely hazardous substances onsite to develop and...

  3. PRESS RELEASE FROM NEUROPSYCHOPHARMACOLOGY

    E-Print Network [OSTI]

    Cai, Long

    likelihood of drug addiction A PDF of the paper mentioned on this release can be found in the Academic take great care not to hype the papers mentioned on our press releases, but are sometimes accused in better understanding this devastating condition and lead to new treatments. Postpartum depression, which

  4. SAND20096226 Unlimited Release

    E-Print Network [OSTI]

    Plimpton, Steve

    SAND2009­6226 Unlimited Release Printed October 2009 Crossing the Mesoscale No-Man's Land via method and its variants are powerful tools for modeling materials at the mesoscale, meaning at length

  5. Rad-Release

    ScienceCinema (OSTI)

    None

    2013-05-28T23:59:59.000Z

    The R&D 100 Award winning Rad-Release Chemical Decontamination Technology is a highly effective (up to 99% removal rate), affordable, patented chemical-foam-clay decontamination process tailored to specific radiological and metal contaminants, which is applicable to a wide variety of substrates. For more information about this project, visit http://www.inl.gov/rd100/2011/rad-release/

  6. Rad-Release

    SciTech Connect (OSTI)

    None

    2011-01-01T23:59:59.000Z

    The R&D 100 Award winning Rad-Release Chemical Decontamination Technology is a highly effective (up to 99% removal rate), affordable, patented chemical-foam-clay decontamination process tailored to specific radiological and metal contaminants, which is applicable to a wide variety of substrates. For more information about this project, visit http://www.inl.gov/rd100/2011/rad-release/

  7. Fission-product release from irradiated LWR fuel

    SciTech Connect (OSTI)

    Osborne, M.F.; Lorenz, R.A.; Wichner, R.P.

    1982-01-01T23:59:59.000Z

    An experimental investigation of fission product release from commercial LWR fuel under accident conditions is being conducted at Oak Ridge National Laboratory (ORNL). This work, which is sponsored by the US Nuclear Regulatory Commission (NRC), is an extension of earlier experiments up to 1600/sup 0/C and is designed to obtain the experimental data needed to reliably assess the consequences of accidents for fuel temperatures up to melting. The objectives of this program are (1) to determine fission product release rates from fully-irradiated commercial LWR fuel in high-temperature steam; (2) to collect and characterize the aerosol released; (3) to identify the chemical forms of the released material; (4) to correlate the results with related experimental data and develop a consistent source term model; and (5) to aid in the interpretation of tests using simulated LWR fuel.

  8. STEP Utility Data Release Form

    Broader source: Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  9. Fermilab | Newsroom | Press Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A This photophotoReleases Subscribe to the

  10. Hanford Press Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHallNot Logged Inmedia/pressRelease.cfm Hanford

  11. 2009 Guidelines to Defra / DECC's GHG Conversion Factors for Company Reporting

    E-Print Network [OSTI]

    . OVERSEAS ELECTRICITY EMISSION FACTORS (ANNEX 10) 54 ANNEX: EXTRACT FROM THE CRG PASSENGER TRANSPORT CO2 (ANNEX 6 AND ANNEX 7) 12 Previous Approach 12 New Passenger Air Transport CO2 Emission Factors (Annex 6) 13 New Freight Air Transport CO2 Emission Factors (Annex 7) 18 New Air Transport Emission Factors

  12. 2010 Guidelines to Defra / DECC's GHG Conversion Factors for Company Reporting

    E-Print Network [OSTI]

    update 44 Passenger Air Transport Direct CO2 Emission Factors (Annex 6) 44 Freight Air Transport Direct CO2 Emission Factors (Annex 7) 49 Air Transport Direct Emission Factors for CH4 and N2O 52 Air. ELECTRICITY CONVERSION FACTORS (ANNEX 3) 10 Summary of changes since previous update 10 Direct Emissions from

  13. United Kingdom Department of Energy and Climate Change (DECC) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri Global Energy LLC Place:Unalakleet JumpInformation Department of

  14. Press Release Corporate Communications

    E-Print Network [OSTI]

    Haller-Dintelmann, Robert

    Page: 1/2 Press Release Corporate Communications Karolinenplatz 5 D-64289 Darmstadt Germany Your.ch@pvw.tu- darmstadt.de Internet: http://www.tu- darmstadt.de/presse e-mail: presse@tu-darmstadt.de On Cloud Nine TU). She intends to use the funding for basic research into the programming of software that will be fit

  15. SAND932591 Unlimited Release

    E-Print Network [OSTI]

    McCurley, Kevin

    SAND93­2591 Unlimited Release First Printed October 1992 Revised October 29, 1993 Revised June 22. This new algorithm is called SHA­1. In this report we describe a portable and efficient implementation information used in their construction. \\Lambda This work was performed under U.S. Department of Energy

  16. Experimental Highlights

    E-Print Network [OSTI]

    Dainton, John

    2010-01-01T23:59:59.000Z

    Highlights at the 13th International Conference on Elastic & Diffractive Scattering (EDS09) of the presentations of new experimental results and developments are presented and discussed.

  17. Pacific Islands Region News Release

    E-Print Network [OSTI]

    Pacific Islands Region News Release Contact: Wende Goo FOR IMMEDIATE RELEASE 808-721-4098 May 27 of these unique twins by contributing more than 100 hours of work to construct a holding pen for the young seal

  18. Press Releases | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Press Releases Topic - Any - General Argonne Information -Awards -Honors Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering ---Biofuels ---Diesel...

  19. Press Releases | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Videos Press Releases Topic - Any - General Argonne Information -Awards -Honors Energy -Energy efficiency --Vehicles ---Alternative fuels ---Automotive engineering ---Biofuels...

  20. Financial Analysis of Experimental Releases Conducted at Glen Canyon Dam

    E-Print Network [OSTI]

    Kemner, Ken

    Department of Energy Western Area Power Administration #12;ii FOREWORD This report was prepared by Argonne Canyon Dam (GCD) conducted for the U.S. Department of Energy's Western Area Power Administration (Western. The facilities known collectively as the Salt Lake City Area Integrated Projects include dams equipped for power

  1. MERCURY RELEASE FROM DISTURBED ANOXIC SOILS

    SciTech Connect (OSTI)

    Jaroslav Solc; Bethany A. Bolles

    2001-07-16T23:59:59.000Z

    The primary objectives of experiments conducted at the Energy & Environmental Research Center (EERC) were to provide information on the secondary release of mercury from contaminated anoxic sediments to an aqueous environment after disturbance/change of in situ physical conditions and to evaluate its migration and partitioning under controlled conditions, including implications of these processes for treatment of contaminated soils. Experimental work included (1) characterization of the mercury-contaminated sediment; (2) field bench-scale dredging simulation; (3) laboratory column study to evaluate a longer-term response to sediment disturbance; (4) mercury volatilization from sediment during controlled drying; (5) resaturation experiments to evaluate the potential for secondary release of residual mercury after disturbance, transport, drying, and resaturation, which simulate a typical scenario during soil excavation and transport to waste disposal facilities; and (6) mercury speciation and potential for methylation during column incubation experiments.

  2. Gas releases from salt

    SciTech Connect (OSTI)

    Ehgartner, B.; Neal, J.; Hinkebein, T.

    1998-06-01T23:59:59.000Z

    The occurrence of gas in salt mines and caverns has presented some serious problems to facility operators. Salt mines have long experienced sudden, usually unexpected expulsions of gas and salt from a production face, commonly known as outbursts. Outbursts can release over one million cubic feet of methane and fractured salt, and are responsible for the lives of numerous miners and explosions. Equipment, production time, and even entire mines have been lost due to outbursts. An outburst creates a cornucopian shaped hole that can reach heights of several hundred feet. The potential occurrence of outbursts must be factored into mine design and mining methods. In caverns, the occurrence of outbursts and steady infiltration of gas into stored product can effect the quality of the product, particularly over the long-term, and in some cases renders the product unusable as is or difficult to transport. Gas has also been known to collect in the roof traps of caverns resulting in safety and operational concerns. The intent of this paper is to summarize the existing knowledge on gas releases from salt. The compiled information can provide a better understanding of the phenomena and gain insight into the causative mechanisms that, once established, can help mitigate the variety of problems associated with gas releases from salt. Outbursts, as documented in mines, are discussed first. This is followed by a discussion of the relatively slow gas infiltration into stored crude oil, as observed and modeled in the caverns of the US Strategic Petroleum Reserve. A model that predicts outburst pressure kicks in caverns is also discussed.

  3. For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall ATours, ProgramsFIRST Center VideoApril 15,

  4. For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall ATours, ProgramsFIRST Center VideoApril

  5. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project Taps HPCNew4 CarbonNews Releases Access news

  6. Responses for Public Release

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin ofEnergy at Waste-to-Energy usingof Enhanced Dr.ResponseEnergyfor Public Release

  7. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21, 2004

  8. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21, 20045

  9. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,

  10. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7 News

  11. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7 News

  12. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7 News

  13. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7 News

  14. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7 News

  15. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7 News

  16. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7 News

  17. News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7 News

  18. WIPP News Releases - 1998

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases DOE

  19. WIPP News Releases - 1999

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases DOE9

  20. WIPP News Releases - 2000

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases

  1. WIPP News Releases - 2001

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases1

  2. WIPP News Releases - 2002

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases12

  3. WIPP News Releases - 2003

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases123

  4. WIPP News Releases - 2005

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases1235

  5. WIPP News Releases - 2006

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases1235

  6. WIPP News Releases - 2007

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening aTurbulenceUtilizeRural Public Reading* (star)8 News Releases1235

  7. Analysis of the April 10, 1987 UF[sub 6] release test

    SciTech Connect (OSTI)

    Just, R.A.; Bloom, S.G.

    1989-02-01T23:59:59.000Z

    A series of controlled uranium hexafluoride (UF[sub 6]) release tests are being conducted at a CESTA (a French government agency) test site near Bordeaux, France. The results of the first release test are documented in Analysis of the April 18,1986 UF[sub 6], Release Test. The first UF[sub 6] release test was designated as a qualification test. The primary objective of this test was to provide the information required to obtain approval for a series of UF[sub 6] release tests. As a result of the experimental difficulties and the compromises associated with obtaining the required qualification data, results from the first release test were used primarily to qualify the site and to plan for additional release tests. Utilizing the lessons learned during the first release test it was possible to conduct a very successful second release test. The second release test was conducted on April 10, 1987. The data collected during the two UF[sub 6] release tests at the CESTA test site are the only known information on UF[sub 6] releases that can be used to evaluate the accuracy of the UF[sub 6] dispersion model. In this report the data collected during the April 10, 1987 release test will be evaluated and compared with the predictions of the UF[sub 6], dispersion model.

  8. Analysis of the April 10, 1987 UF{sub 6} release test

    SciTech Connect (OSTI)

    Just, R.A.; Bloom, S.G.

    1989-02-01T23:59:59.000Z

    A series of controlled uranium hexafluoride (UF{sub 6}) release tests are being conducted at a CESTA (a French government agency) test site near Bordeaux, France. The results of the first release test are documented in Analysis of the April 18,1986 UF{sub 6}, Release Test. The first UF{sub 6} release test was designated as a qualification test. The primary objective of this test was to provide the information required to obtain approval for a series of UF{sub 6} release tests. As a result of the experimental difficulties and the compromises associated with obtaining the required qualification data, results from the first release test were used primarily to qualify the site and to plan for additional release tests. Utilizing the lessons learned during the first release test it was possible to conduct a very successful second release test. The second release test was conducted on April 10, 1987. The data collected during the two UF{sub 6} release tests at the CESTA test site are the only known information on UF{sub 6} releases that can be used to evaluate the accuracy of the UF{sub 6} dispersion model. In this report the data collected during the April 10, 1987 release test will be evaluated and compared with the predictions of the UF{sub 6}, dispersion model.

  9. Experimental Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeeches EnergyActiveTechnologiesCenter

  10. Experimental Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A This photo shows one of theHall

  11. COMMERCIAL SNF ACCIDENT RELEASE FRACTIONS

    SciTech Connect (OSTI)

    S.O. Bader

    1999-10-18T23:59:59.000Z

    The purpose of this design analysis is to specify and document the total and respirable fractions for radioactive materials that are released from an accident event at the Monitored Geologic Repository (MGR) involving commercial spent nuclear fuel (CSNF) in a dry environment. The total and respirable release fractions will be used to support the preclosure licensing basis for the MGR. The total release fraction is defined as the fraction of total CSNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. The radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses. This subset of the total release fraction is referred to as the respirable release fraction. Potential accidents may involve waste forms that are characterized as either bare (unconfined) fuel assemblies or confined fuel assemblies. The confined CSNF assemblies at the MGR are contained in shipping casks, canisters, or disposal containers (waste packages). In contrast to the bare fuel assemblies, the container that confines the fuel assemblies has the potential of providing an additional barrier for diminishing the total release fraction should the fuel rod cladding breach during an accident. However, this analysis will not take credit for this additional bamer and will establish only the total release fractions for bare unconfined CSNF assemblies, which may however be conservatively applied to confined CSNF assemblies.

  12. 28 March 2011 Press release for immediate release

    E-Print Network [OSTI]

    Bristol, University of

    28 March 2011 Press release for immediate release A jog a day keeps osteoporosis away A short burst, these are unlikely to offer much protection against the risk of osteoporosis in later life. This is the key finding such as walking. This is consistent with previous findings that women entering the menopause who combined

  13. Press release For Immediate Release Seattle, USA. June 6, 2008

    E-Print Network [OSTI]

    and the high prices for wood pellets in Europe. The rapid expansion in global trade of biomass is likelyPress release ­ For Immediate Release Seattle, USA. June 6, 2008 Global trade of woody biomass has almost doubled in five years With the increasing demand for woody biomass, global trade of particularly

  14. Experimental Conclusions

    E-Print Network [OSTI]

    Das, Suman

    Gasification is that any type of biomass (including low cost feedstocks like agricultural residues, forest waste, etc) can be converted to syngas. Pyrolysis and Char gasification proceed sequentially) To obtain experimental data and develop mathematical models on intrinsic char gasification kinetics, free

  15. UNCLASSIFIED TPBAR RELEASES, INCLUDING TRITIUM TTQP-1-091 Rev 14

    SciTech Connect (OSTI)

    Gruel, Robert L.; Love, Edward F.; Thornhill, Cheryl K.

    2012-07-01T23:59:59.000Z

    This document provides a listing of unclassified tritium release values that should be assumed for unclassified analysis. Much of the information is brought forth from the related documents listed in Section 5.0 to provide a single-source listing of unclassified release values. This information has been updated based on current design analysis and available experimental data.

  16. ISOPAR L RELEASE RATES FROM SALTSTONE USING SIMULATED SALT SOLUTIONS

    SciTech Connect (OSTI)

    Zamecnik, J; Michael Bronikowski, M; Alex Cozzi, A; Russell Eibling, R; Charles Nash, C

    2008-07-31T23:59:59.000Z

    The Modular Caustic-Side Solvent Extraction (CSSX) Unit (MCU) and the Salt Waste Processing Facility (SWPF) will produce a Decontaminated Salt Solution (DSS) that will go to the Saltstone Production Facility (SPF). Recent information indicates that solvent entrainment in the DSS is larger than expected. The main concern is with Isopar{reg_sign} L, the diluent in the solvent mixture, and its flammability in the saltstone vault. If it is assumed that all the Isopar{reg_sign} L is released instantaneously into the vault from the curing grout before each subsequent pour, the Isopar{reg_sign} L in the vault headspace is well mixed, and each pour displaces an equivalent volume of headspace, the maximum concentration of Isopar{reg_sign} L in the DSS to assure 25% of the lower flammable limit is not exceeded has been determined to be about 4 ppm. The amount allowed would be higher if the release from grout were significantly less. The Savannah River National Laboratory was tasked with determining the release of Isopar{reg_sign} L from saltstone prepared with a simulated DSS with Isopar{reg_sign} L concentrations ranging from 50 to 200 mg/L in the salt fraction and with test temperatures ranging from ambient to 95 C. The results from the curing of the saltstone showed that the amount of Isopar{reg_sign} L released versus time can be treated as a percentage of initial amount present; there was no statistically significant dependence of the release rate on the initial concentration. The majority of the Isopar{reg_sign} L that was released over the test duration was released in the first few days. The release of Isopar{reg_sign} L begins immediately and the rate of release decreases over time. At higher temperatures the immediate release rate is larger than at lower temperatures. Initial curing temperature was found to be very important as slight variations during the first few hours or days had a significant effect on the amount of Isopar{reg_sign} L released. Short scoping tests at 95 C with solvent containing all components (Isopar{reg_sign} L, suppressor trioctylamine (TOA), and modifier Cs-7SB) except the BOBCalixC6 extractant released less Isopar{reg_sign} L than the tests run with Isopar{reg_sign} L/TOA. Based on these scoping tests, the Isopar{reg_sign} L releases reported herein are conservative. Isopar{reg_sign} L release was studied for a two-month period and average cumulative release rates were determined from three sets of tests each at 95 and 75 C and at ambient conditions. The overall average releases at were estimated for each temperature. For the 95 and 75 C data, at a 5% significance level, the hypothesis that the three test sets at each temperature had the same average percent release can be rejected, suggesting that there was a statistically significant difference among the three averages seen in the three experimental tests conducted. An upper confidence limit on the mean percent release required incorporation of variation from two sources: test-to-test variation as well as the variation within a test. An analysis of variance that relies on a random effects model was used to estimate the two variance components. The test-to-test variance and the within test (or residual) variance were both calculated. There is no indication of a statistically significant linear correlation between the percent Isopar{reg_sign} L release and the Isopar{reg_sign} L initial concentration. From the analysis of variance, upper confidence limits at confidences of 80-95% were calculated for the data at 95 and 75 C. The mean Isopar{reg_sign} L percent releases were 67.33% and 13.17% at 95 and 75 C, respectively.

  17. Commercial SNF Accident Release Fractions

    SciTech Connect (OSTI)

    J. Schulz

    2004-11-05T23:59:59.000Z

    The purpose of this analysis is to specify and document the total and respirable fractions for radioactive materials that could be potentially released from an accident at the repository involving commercial spent nuclear fuel (SNF) in a dry environment. The total and respirable release fractions are used to support the preclosure licensing basis for the repository. The total release fraction is defined as the fraction of total commercial SNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. Radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses; this subset of the total release fraction is referred to as the respirable release fraction. Accidents may involve waste forms characterized as: (1) bare unconfined intact fuel assemblies, (2) confined intact fuel assemblies, or (3) canistered failed commercial SNF. Confined intact commercial SNF assemblies at the repository are contained in shipping casks, canisters, or waste packages. Four categories of failed commercial SNF are identified: (1) mechanically and cladding-penetration damaged commercial SNF, (2) consolidated/reconstituted assemblies, (3) fuel rods, pieces, and debris, and (4) nonfuel components. It is assumed that failed commercial SNF is placed into waste packages with a mesh screen at each end (CRWMS M&O 1999). In contrast to bare unconfined fuel assemblies, the container that confines the fuel assemblies could provide an additional barrier for diminishing the total release fraction should the fuel rod cladding breach during an accident. This analysis, however, does not take credit for the additional barrier and establishes only the total release fractions for bare unconfined intact commercial SNF assemblies, which may be conservatively applied to confined intact commercial I SNF assemblies.

  18. Ecosystem effects of environmental flows: modelling and experimental floods in a dryland river

    E-Print Network [OSTI]

    physical system using: (1) a reservoir operations model to simulate reservoir releases and reservoir water experimental floods on the differential mortality of native and exotic riparian trees, on beaver dam integrity of model applications and experimental flow releases are contributing to adaptive flow management

  19. MEDIA RELEASE 17 May 2012

    E-Print Network [OSTI]

    Pedersen, Tom

    heating systems known as District Energy (DE) Systems generate heat at a centralMEDIA RELEASE 17 May 2012 District Energy heating an effective way for BC communities to reduce greenhouse gases? Centralized

  20. PRESS RELEASE 2 February 2010

    E-Print Network [OSTI]

    PRESS RELEASE 2 February 2010 Replica house flooded by 196,000 gallons of water to test flood extensive hydraulic laboratory at Wallingford. To streamline the test procedures, HR Wallingford have

  1. The Energy Department's Geothermal Technologies Office Releases...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Energy Department's Geothermal Technologies Office Releases 2013 Annual Report The Energy Department's Geothermal Technologies Office Releases 2013 Annual Report February 7,...

  2. Changes in release cycles for EIA's

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    Annual Energy Outlook Full Edition will be released in spring 2014, including analysis of energy issues and many alternative scenarios. Shorter will be released in late 2014 or...

  3. Webinar: Algal Biofuels Consortium Releases Groundbreaking Research...

    Energy Savers [EERE]

    Webinar: Algal Biofuels Consortium Releases Groundbreaking Research Results Webinar: Algal Biofuels Consortium Releases Groundbreaking Research Results Dr. Jose Olivares of Los...

  4. Radiological Release Accident Investigation Report - Phase 1...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Radiological Release Accident Investigation Report - Phase 1 Radiation Report Radiological Release Accident Investigation Report - Phase 1 Radiation Report Phase 1 of this accident...

  5. Release and sorption of alkali metals in coal conversion

    SciTech Connect (OSTI)

    Witthohn, A.; Oeltjen, L.; Hilpert, K.

    1998-07-01T23:59:59.000Z

    Released as gaseous species during coal combustion and gasification, alkali metal compounds cause high temperature corrosion especially at the gas turbine blading of coal-fired combined cycle power plants. Experimental and theoretical basic investigations are presented, which contribute to the understanding of the release and sorption of these contaminants. Knudsen effusion mass spectrometry was used to study the vaporization of coal ashes and slags at temperatures between 200 and 1,800 C and to determine the released alkali species and their partial pressures. The data base system FACT and the modified quasi-chemical model for non-ideal solutions were applied to model the thermodynamic behavior of coal slags and to determine material compositions of maximum alkali sorption capacity.

  6. Recommended plutonium release fractions from postulated fires. Final report

    SciTech Connect (OSTI)

    Kogan, V.; Schumacher, P.M.

    1993-12-01T23:59:59.000Z

    This report was written at the request of EG&G Rocky Flats, Inc. in support of joint emergency planning for the Rocky Flats Plant (RFP) by EG&G and the State of Colorado. The intent of the report is to provide the State of Colorado with an independent assessment of any respirable plutonium releases that might occur in the event of a severe fire at the plant. Fire releases of plutonium are of interest because they have been used by EG&G to determine the RFP emergency planning zones. These zones are based on the maximum credible accident (MCA) described in the RFP Final Environmental Impact Statement (FEIS) of 1980, that MCA is assumed to be a large airplane crashing into a RFP plutonium building.The objective of this report was first, to perform a worldwide literature review of relevant release experiments from 1960 to the present and to summarize those findings, and second, to provide recommendations for application of the experimental data to fire release analyses at Rocky Flats. The latter step requires translation between experimental and expected RFP accident parameters, or ``scaling.`` The parameters of particular concern are: quantities of material, environmental parameters such as the intensity of a fire, and the physico-chemical forms of the plutonium. The latter include plutonium metal, bulk plutonium oxide powder, combustible and noncombustible wastes contaminated with plutonium oxide powder, and residues from plutonium extraction processes.

  7. Nuclear energy release from fragmentation

    E-Print Network [OSTI]

    Cheng Li; S. R. Souza; M. B. Tsang; Feng-Shou Zhang

    2015-05-09T23:59:59.000Z

    Nuclear energy released by splitting Uranium and Thorium isotopes into two, three, four, up to eight fragments with nearly equal size are studied. We found that the energy released come from equally splitting the $^{235,238}$U and $^{230,232}$Th nuclei into to three fragments is largest. The statistical multifragmentation model is employed to calculate the probability of different breakup channels for the excited nuclei. Weighing the the probability distributions of fragments multiplicity at different excitation energies for the $^{238}$U nucleus, we found that an excitation energy between 1.2 and 2 MeV/u is optimal for the $^{235}$U, $^{238}$U, $^{230}$Th and $^{232}$Th nuclei to release nuclear energy of about 0.7-0.75 MeV/u.

  8. Nuclear energy release from fragmentation

    E-Print Network [OSTI]

    Li, Cheng; Tsang, M B; Zhang, Feng-Shou

    2015-01-01T23:59:59.000Z

    Nuclear energy released by splitting Uranium and Thorium isotopes into two, three, four, up to eight fragments with nearly equal size are studied. We found that the energy released come from equally splitting the $^{235,238}$U and $^{230,232}$Th nuclei into to three fragments is largest. The statistical multifragmentation model is employed to calculate the probability of different breakup channels for the excited nuclei. Weighing the the probability distributions of fragments multiplicity at different excitation energies for the $^{238}$U nucleus, we found that an excitation energy between 1.2 and 2 MeV/u is optimal for the $^{235}$U, $^{238}$U, $^{230}$Th and $^{232}$Th nuclei to release nuclear energy of about 0.7-0.75 MeV/u.

  9. MEDIA RELEASE 10 February 2011

    E-Print Network [OSTI]

    Pedersen, Tom

    If British Columbia ramps up production to become a major electricity exporter there is no guaranteeMEDIA RELEASE 10 February 2011 Report reveals gaps in BC's electricity export policy framework Solutions (PICS). The report, The Export Question: Designing Policy for British Columbia Electricity Trade

  10. PRESS RELEASE 6 April 2010

    E-Print Network [OSTI]

    PRESS RELEASE 6 April 2010 Green office design and fit out company Morgan Lovell has become establishing processes and systems to improve energy efficiency at its London office. This has included fitting Marc Edney BSI Group Press Office Tel: +44 (0)20 8996 6330 (24 hours) Email: pressoffice

  11. CSR Press Release Submitted by

    E-Print Network [OSTI]

    CSR Press Release Submitted by: Categories: Posted: Energy Efficiency Listed as the Top Sustainability Issue New report says companies that take sustainability through an integrated approach are more likely to achieve their desired outcomes. Envido Sustainability, Environment Jul 30, 2010 ­ 11:48 AM EST

  12. Sea Level Rise Media Release

    E-Print Network [OSTI]

    Hu, Aixue

    Sea Level Rise Media Release Coverage Report 07/06/2009 Melting Ice Could Lead to Massive Waves 06/11/2009 Rising sea levels could see U.S. Atlantic coast cities make hard choices; Where to let Baltimore Chronicle & Sentinel, The 06/08/2009 Rapid rise in sea levels on East Coast predicted Pittsburgh

  13. Simulated seismic event release fraction data: Progress report, April 1986-April 1987

    SciTech Connect (OSTI)

    Langer, G.; Deitesfeld, C.A. (ed.)

    1987-11-15T23:59:59.000Z

    The object of this project is to obtain experimental data on the release of airborne particles during seismic events involving plutonium handling facilities. In particular, cans containing plutonium oxide powder may be involved and some of the powder may become airborne. No release fraction data for such scenarios are available and risk assessment calculations for such events lacked specificity describing the physical processes involved. This study has provided initial data based on wind tunnel tests simulating the impact of the debris on simulated cans of plutonium oxide powder. The release fractions are orders of magnitude smaller than previously available estimates. 8 refs., 3 figs., 2 tabs.

  14. Neutron-absorber release device

    DOE Patents [OSTI]

    VAN Erp, Jan B. (Hinsdale, IL); Kimont, Edward L. (Evergreen Park, IL)

    1976-01-01T23:59:59.000Z

    A resettable device is provided for supporting an object, sensing when an environment reaches a critical temperature and releasing the object when the critical temperature is reached. It includes a flexible container having a material inside with a melting point at the critical temperature. The object's weight is supported by the solid material which gives rigidity to the container until the critical temperature is reached at which point the material in the container melts. The flexible container with the now fluid material inside has insufficient strength to support the object which is thereby released. Biasing means forces the container back to its original shape so that when the temperature falls below the melting temperature the material again solidifies, and the object may again be supported by the device.

  15. 2012 Microgrid Workshop Summary Released

    Broader source: Energy.gov [DOE]

    The Department of Energy has released the summary report from the July 30-31, 2012 Microgrid Workshop presented by the Office of Electricity Delivery and Energy Reliability at the Illinois Institute of Technology in Chicago. The workshop was held in response to discussions at the preceding DOE Microgrid Workshop, held in August 2011, which called for sharing lessons learned and best practices for system integration from existing projects in the U.S. (including military microgrids) and internationally.

  16. Department of Energy Releases 2014 Strategic Plan

    Broader source: Energy.gov [DOE]

    The Department of Energy released its 2014 Strategic Plan, a comprehensive blueprint to guide the agency's core mission.

  17. Cleared for public release, distribution unlimited

    E-Print Network [OSTI]

    Feigenbaum, Joan

    Cleared for public release, distribution unlimited A Study on The Network as Economy #12;Cleared for public release, distribution unlimited The Premise · Modern technological networks are on a collision for public release, distribution unlimited Network-centric Operations are at Risk · Increasingly pervasive

  18. arsenic stimulates release: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    releasing hormones LHFSH-RH for comparison Paris-Sud XI, Universit de 122 DRIFT BOTTLE RELEASES DRIFT BOTTLE RELEASES Environmental Sciences and Ecology Websites Summary:...

  19. Total Prompt Energy Release in the Neutron-Induced Fission

    E-Print Network [OSTI]

    D. G. Madland

    2006-01-01T23:59:59.000Z

    This study addresses, for the first time, the total prompt energy release and its components for the fission of 235 U, 238 U, and 239 Pu as a function of the kinetic energy of the neutron inducing the fission. The components are extracted from experimental measurements, where they exist, together with model-dependent calculation, interpolation, and extrapolation. While the components display clear dependencies upon the incident neutron energy, their sums display only weak, yet definite, energy dependencies. Also addressed is the total prompt energy deposition in fission for the same three systems. Results are presented in equation form. New measurements are recommended as a consequence of this study. Key words: Energy release and energy deposition in neutron-induced fission,

  20. News Releases | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project Taps HPCNew4 Carbon NanotubeNewsroomReleases

  1. News Releases | Advanced Materials | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing nanorodSizeprogramProjectReleases

  2. News Releases | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337,2 Revealing4 News Releases December 21,7

  3. Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals from a NewCuneoTechnologyCHPRC News Release AugustMore

  4. Media Contact: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals from a NewCuneoTechnologyCHPRC News Release

  5. Media Contacts: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals from a NewCuneoTechnologyCHPRC News Release Susan For

  6. Media Contacts: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals from a NewCuneoTechnologyCHPRC News ReleaseFebruary

  7. Media Contacts: For Immediate Release:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals from a NewCuneoTechnologyCHPRC News ReleaseFebruaryJuly

  8. BETO Announces June Webinar: Algal Biofuels Consortium Releases...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June Webinar: Algal Biofuels Consortium Releases Groundbreaking Research Results BETO Announces June Webinar: Algal Biofuels Consortium Releases Groundbreaking Research Results...

  9. Remotely releasable template and dome

    SciTech Connect (OSTI)

    Allen, G.G. Jr.

    1986-12-02T23:59:59.000Z

    This patent describes a remotely releasable template assembly for precision placement of a template of the type having at least one sleeve member for placing about a well casing stub extending from the sea floor, comprising: mating means mounted with the template for demountably coupling the template to a complementary end of a drill string extending from a support structure located above the well casing stub. The mating means is positioned near the template assembly center of balance when the template assembly is demountably coupled to the drill string; the vertical axis of the drill string being essentially parallel to the longitudinal axis of the sleeve member when the drill string is demountably couple to the template assembly; the end of the drill string includes a gyroscopic orientation means for detecting the deviation of the template from a desired bearing; and the mating means maintains the template semi-ridgidly coupled to the drill string until the template is controllably released from the drill string; whereby the rotation of the drill string about the vertical axis of the drill string rotates the template assembly into the desired orientation.

  10. Release Data Package for Hanford Site Assessments

    SciTech Connect (OSTI)

    Riley, Robert G.; Lopresti, Charles A.; Engel, David W.

    2006-07-01T23:59:59.000Z

    Beginning in fiscal year (FY) 2003, the U.S. Department of Energy (DOE) Richland Operations Office initiated activities, including the development of data packages, to support a Hanford assessment. This report describes the data compiled in FY 2003 through 2005 to support the Release Module of the System Assessment Capability (SAC) for the updated composite analysis. This work was completed as part of the Characterization of Systems Project, part of the Remediation and Closure Science Project, the Hanford Assessments Project, and the Characterization of Systems Project managed by Pacific Northwest National Laboratory. Related characterization activities and data packages for the vadose zone and groundwater are being developed under the remediation Decision Support Task of the Groundwater Remediation Project managed by Fluor Hanford, Inc. The Release Module applies release models to waste inventory data from the Inventory Module and accounts for site remediation activities as a function of time. The resulting releases to the vadose zone, expressed as time profiles of annual rates, become source terms for the Vadose Zone Module. Radioactive decay is accounted for in all inputs and outputs of the Release Module. The Release Module is implemented as the VADER (Vadose zone Environmental Release) computer code. Key components of the Release Module are numerical models (i.e., liquid, soil-debris, cement, saltcake, and reactor block) that simulate contaminant release from the different waste source types found at the Hanford Site. The Release Module also handles remediation transfers to onsite and offsite repositories.

  11. Nolij Corporation Proprietary & Confidential Information Release Notes for Nolij Web

    E-Print Network [OSTI]

    Escher, Christine

    Nolij Corporation Proprietary & Confidential Information Release Notes for Nolij Web Release 6.3.x Web Release 6.3.x Copyright © 2010 - 2011, Nolij Corporation. All rights reserved. Revised 02Release Notes for Nolij Web Release 6.3.x Introduction These release notes provide information about new

  12. Biomediated continuous release phosphate fertilizer

    DOE Patents [OSTI]

    Goldstein, A.H.; Rogers, R.D.

    1999-06-15T23:59:59.000Z

    A composition is disclosed for providing phosphate fertilizer to the root zone of plants. The composition comprises a microorganism capable of producing and secreting a solubilization agent, a carbon source for providing raw material for the microorganism to convert into the solubilization agent, and rock phosphate ore for providing a source of insoluble phosphate that is solubilized by the solubilization agent and released as soluble phosphate. The composition is provided in a physical form, such as a granule, that retains the microorganism, carbon source, and rock phosphate ore, but permits water and soluble phosphate to diffuse into the soil. A method of using the composition for providing phosphate fertilizer to plants is also disclosed. 13 figs.

  13. Biomediated continuous release phosphate fertilizer

    DOE Patents [OSTI]

    Goldstein, Alan H. (Beverly Hills, CA); Rogers, Robert D. (Idaho Falls, ID)

    1999-01-01T23:59:59.000Z

    A composition is disclosed for providing phosphate fertilizer to the root zone of plants. The composition comprises a microorganism capable of producing and secreting a solubilization agent, a carbon source for providing raw material for the microorganism to convert into the solubilization agent, and rock phosphate ore for providing a source of insoluble phosphate that is solubilized by the solubilization agent and released as soluble phosphate. The composition is provided in a physical form, such as a granule, that retains the microorganism, carbon source, and rock phosphate ore, but permits water and soluble phosphate to diffuse into the soil. A method of using the composition for providing phosphate fertilizer to plants is also disclosed.

  14. EIA - Annual Energy Outlook 2014 Early Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Next Release Date: March 2016 | full report Overview Data Reference Case Side Cases Interactive Table Viewer By Section Executive summary Economic growth Prices Delivered energy...

  15. DOE Releases Electricity Subsector Cybersecurity Risk Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electricity Subsector Cybersecurity Risk Management Process (RMP) Guideline DOE Releases Electricity Subsector Cybersecurity Risk Management Process (RMP) Guideline May 23, 2012 -...

  16. DOE National Laboratory Releases Annual Accomplishments Report

    Broader source: Energy.gov [DOE]

    The National Energy Technology Laboratory has released its annual accomplishments report, highlighting breakthroughs in research and technology development to address the nation's energy, economic, and environmental challenges.

  17. CMQ-OE Press Release.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RELEASE Jeffrey A. Christiaansen Receives ASQ-Certified Manager of QualityOrganizational Excellence Milwaukee, WI, May 13, 2008 - The Certification Board of the American...

  18. Summary Profiles of Hanford Effluent Release Data

    SciTech Connect (OSTI)

    KM Tominey; MK White

    1999-01-07T23:59:59.000Z

    Hanford publishes extensive estimates of their offsite releases of various chemical and radiological species annuaIly. In this report we examine using these estimates to develop additional insight into how effectively such releases of hazardous materials are being controlled at Hanford. Historical estimates of airborne and surface water releases of selected contaminants are compared with estimates of the overall Site inventory of those contaminants and with the corresponding release limits and background levels. These comparisons are also examined over a five-year period (1993 to 1997) to determine how these releases have changed during that time. Most of the waste management and environmental restoration activities under way at Hanford are intended to provide final, permanent disposition of the Site's inventory of hazardous materials, with the ultimate objective of ensuring that risks to the public and the environment are controlled to an acceptable level. An important consideration during the conduct of these activities is prott%ting the public and the environment while accomplishing the longer-term ~~ objectives. The amounts of hazardous materials that are being released to the air or surface water while waste management and environmental activities are being conducted is one important measure of their overall effectiveness. The comparisons described in this report indicate that measures to control the release of the selected contaminants from the Hanford Site are, and have been, veryeffective. The amounts of these materials released to surface water and air are very small compared with background and regulatory limits and smaller still considering the inventories" under management. Comparisons of annual releases ranged from slightly over background to five orders of magnitude below background levels (e.g., l/10,000* of background levels), and up to 14 orders of magnitude less than estimates of Site inventories. Annual releases for these contaminants ranged from three to ten orders of magnitude less than regulatory limits. In addition, release of the selected contaminants generally decreased over the five-year period examined.

  19. Morphology of Gas Release in Physical Simulants

    SciTech Connect (OSTI)

    Daniel, Richard C.; Burns, Carolyn A.; Crawford, Amanda D.; Hylden, Laura R.; Bryan, Samuel A.; MacFarlan, Paul J.; Gauglitz, Phillip A.

    2014-07-03T23:59:59.000Z

    This report documents testing activities conducted as part of the Deep Sludge Gas Release Event Project (DSGREP). The testing described in this report focused on evaluating the potential retention and release mechanisms of hydrogen bubbles in underground radioactive waste storage tanks at Hanford. The goal of the testing was to evaluate the rate, extent, and morphology of gas release events in simulant materials. Previous, undocumented scoping tests have evidenced dramatically different gas release behavior from simulants with similar physical properties. Specifically, previous gas release tests have evaluated the extent of release of 30 Pa kaolin and 30 Pa bentonite clay slurries. While both materials are clays and both have equivalent material shear strength using a shear vane, it was found that upon stirring, gas was released immediately and completely from bentonite clay slurry while little if any gas was released from the kaolin slurry. The motivation for the current work is to replicate these tests in a controlled quality test environment and to evaluate the release behavior for another simulant used in DSGREP testing. Three simulant materials were evaluated: 1) a 30 Pa kaolin clay slurry, 2) a 30 Pa bentonite clay slurry, and 3) Rayleigh-Taylor (RT) Simulant (a simulant designed to support DSGREP RT instability testing. Entrained gas was generated in these simulant materials using two methods: 1) application of vacuum over about a 1-minute period to nucleate dissolved gas within the simulant and 2) addition of hydrogen peroxide to generate gas by peroxide decomposition in the simulants over about a 16-hour period. Bubble release was effected by vibrating the test material using an external vibrating table. When testing with hydrogen peroxide, gas release was also accomplished by stirring of the simulant.

  20. Method for releasing hydrogen from ammonia borane

    DOE Patents [OSTI]

    Varma, Arvind; Diwan, Moiz; Shafirovich, Evgeny; Hwang, Hyun-Tae; Al-Kukhun, Ahmad

    2013-02-19T23:59:59.000Z

    A method of releasing hydrogen from ammonia borane is disclosed. The method comprises heating an aqueous ammonia borane solution to between about 80-135.degree. C. at between about 14.7 and 200 pounds per square inch absolute (psia) to release hydrogen by hydrothermolysis.

  1. Contamination surveys for release of material

    SciTech Connect (OSTI)

    Durham, J.S.; Johnson, M.L. [Pacific Northwest Lab., Richland, WA (United States); Gardner, D.L. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-05-01T23:59:59.000Z

    This report describes, and presents the technical basis for, a methodology for performing instrument surveys to release material from radiological control, including release to controlled areas and release from radiological control. The methodology is based on a fast scan survey, a large-area wipe survey, and a series of statistical, fixed measurements. The methodology meets the requirements of the US Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for release of material in less time than is required by a conventional scan survey. Implementation of the proposed methodology with a confidence interval of 67% will meet the material release requirements. The material evaluation process will allow material that has not been exposed to contamination to be released from radiological control without a survey. For potential radioactive contaminants that are not reserved in DOE Order 5400.5, the methodology will allow material to be released from radiological control. For other radionuclides, with the exception of some difficult-to-detect radionuclides, material may be released for controlled use. Compared with current techniques, the proposed methodology will reduce the amount of time required to perform surveys.

  2. Influence of release frequency in software development

    E-Print Network [OSTI]

    a six weeks development lifecycle [2]. It's also the case for exploitations systems. Microsoft wants, Canonical may change the release development for a 6 months lifecycle to a 2 years release frequency [4]. B as possible to improve the attractiveness of the product over the completion. Software is going from perpetual

  3. Connectivity To Atmospheric Release Advisory Capability

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-02-26T23:59:59.000Z

    To establish DOE and NNSA connectivity to Atmospheric Release Advisory Capability (ARAC) for sites and facilities that have the potential for releasing hazardous materials sufficient to generate certain emergency declarations and to promote efficient use of resources for consequence assessment activities at DOE sites, facilities, operations, and activities in planning for and responding to emergency events. No cancellations.

  4. Grid Architecture Release 2.3

    E-Print Network [OSTI]

    Draft Grid Architecture Release 2.3 November 2014 Draft #12;Grid Architecture Release 2.3 November..................................................................................................... 2.1 3.0 Brief Introduction to Grid Architecture........................................................................................ 3.2 3.1 How Grid Architecture Can Be Used

  5. Segway Documentation Release 0.2.7

    E-Print Network [OSTI]

    Noble, William Stafford

    Segway Documentation Release 0.2.7 Michael M. Hoffman March 22, 2011 #12;#12;CONTENTS 1 Segway 0.2 documentation 3 1.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 Indices and tables 19 i #12;ii #12;Segway Documentation, Release 0.2.7 Contents: CONTENTS 1 #12

  6. Environmental release summary (ERS) database CY 1997

    SciTech Connect (OSTI)

    Gleckler, B.P.

    1998-07-01T23:59:59.000Z

    This report discusses the Environmental Release Summary (ERS) database. The current needs of the Effluent and Environmental database is continually modified to fulfill monitoring (EEM) program (managed by Waste Management Federal Services of Hanford, Incorporated, Air and Water Services Organization). Changes are made to accurately calculate current releases, to affect how past releases are calculated. This document serves as a snap-shot of the database and software for the CY-1997 data and releases. This document contains all of the relevant data for calculating radioactive-airborne and liquid effluent. The ERS database is the official repository for the CY-1997 ERS release reports and the settings used to generate those reports. As part of the Tri-Party Agreement, FDH is committed to provide a hard copy of the ERS database for Washington State Department of Ecology, upon request. This document also serves as that hard copy for the last complete calendar year.

  7. Prediction of release-etch times for surface-micromachined structures

    SciTech Connect (OSTI)

    Eaton, W.P.; Jarecki, R.L.; Smith, J.H.

    1997-05-01T23:59:59.000Z

    A one-dimensional model is presented which describes the release-etch behavior of sacrificial oxides in aqueous HF. Starting from first principles and an empirical rate law, release etch kinetics are derived for primitive geometries. The behavior of complex three-dimensional structures is described by joining the solutions of constituent primitives and applying appropriate boundary conditions.The two fitting parameters, k{sub 1} and k{sub 2}, are determined from the simplest structure and describe the more complex structures well. Experimental validation of the model is presented with data for all of the geometries and four types of sacrificial oxides.

  8. Composition and method for storing and releasing hydrogen

    DOE Patents [OSTI]

    Thorn, David L.; Tumas, William; Ott, Kevin C.; Burrell, Anthony K.

    2010-06-15T23:59:59.000Z

    A chemical system for storing and releasing hydrogen utilizes an endothermic reaction that releases hydrogen coupled to an exothermic reaction to drive the process thermodynamically, or an exothermic reaction that releases hydrogen coupled to an endothermic reaction.

  9. Experimental Highlights - 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    weapons as they age or are subjected to the immense pressures and temperatures of a thermonuclear explosion. By providing experimental data to compare to computer models of...

  10. 3. EXPERIMENTAL METHODS ACKNOWLEDGMENTS

    E-Print Network [OSTI]

    and experimental analysis for water in soil. J. Non-Equil. Thermodyn. 34(2):133-153. Bixler, N.E. 1985. NORIA

  11. EIA - Annual Energy Outlook 2012 Early Release

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    Report Number: DOEEIA-0383ER(2012) This release is an abridged version of the Annual Energy Outlook that highlights changes in the AEO Reference case projections for key energy...

  12. University of Alberta Library Release Form

    E-Print Network [OSTI]

    Alberta, University of

    University of Alberta Library Release Form Name of Author: Luca Pireddu Title of Thesis: Pathway: 2005 Permission is hereby granted to the University of Alberta Library to reproduce single copies . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Enzyme classification . . . . . . . . .

  13. Bonneville Power Administration FOR IMMEDIATE RELEASE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    40 13 Bonneville Power Administration FOR IMMEDIATE RELEASE December 26, 2013 CONTACT: Teresa Waugh, 503-230-7536 or 503-230-5131 BPA seeks comment on draft study of proposed...

  14. BONNEVILLE POWER ADMINISTRATION FOR IMMEDIATE RELEASE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 BONNEVILLE POWER ADMINISTRATION FOR IMMEDIATE RELEASE Friday, May 8, 2015 CONTACT: Kevin Wingert, 503-230-4140503-230-5131 BPA is well prepared to meet dry year demands Planning...

  15. Oil or Hazardous Spills Releases Law (Georgia)

    Broader source: Energy.gov [DOE]

    The Oil or Hazardous Spills Law requires notice to the Environmental Protection Division of the State Department of Natural Resources Emergency Operations Center when there is a spill or release of...

  16. Secretary of Energy Advisory Board Subcommittee Releases Shale...

    Office of Environmental Management (EM)

    Releases Shale Gas Recommendations Secretary of Energy Advisory Board Subcommittee Releases Shale Gas Recommendations August 11, 2011 - 8:54am Addthis WASHINGTON, D.C. - A diverse...

  17. accidental radioactive releases: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    atmospheric release. Atmos. Env. 45 Paris-Sud XI, Universit de 3 New Tracers Identify Hydraulic Fracturing Fluids and Accidental Releases from Oil and Gas Operations...

  18. Energy Department Releases Case Studies and Best Practices to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Releases Case Studies and Best Practices to Assist Innovative Energy Efficiency Programs Energy Department Releases Case Studies and Best Practices to Assist Innovative Energy...

  19. Microfabricated Renewable Beads-Trapping/Releasing Flow Cell...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Microfabricated Renewable Beads-TrappingReleasing Flow Cell for Rapid Antigen-Antibody Reaction in Chemiluminescent Immunoassay Microfabricated Renewable Beads-TrappingReleasing...

  20. Promotion of Hydrogen Release from Ammonia Borane with Mechanically...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Promotion of Hydrogen Release from Ammonia Borane with Mechanically Activated Hexagonal Boron Nitride. Promotion of Hydrogen Release from Ammonia Borane with Mechanically Activated...

  1. Department of Energy Releases New Report on Economic Impact of...

    Energy Savers [EERE]

    Department of Energy Releases New Report on Economic Impact of Recovery Act Advanced Vehicle Investments Department of Energy Releases New Report on Economic Impact of Recovery Act...

  2. Northeast Home Heating Oil Reserve - Guidelines for Release ...

    Office of Environmental Management (EM)

    Heating Oil Reserve Northeast Home Heating Oil Reserve - Guidelines for Release Northeast Home Heating Oil Reserve - Guidelines for Release The Energy Policy and Conservation...

  3. Energy Department Releases Report, Evaluates Potential for Wind...

    Energy Savers [EERE]

    Energy Department Releases Report, Evaluates Potential for Wind Power in All 50 States Energy Department Releases Report, Evaluates Potential for Wind Power in All 50 States May...

  4. NNSA Releases Pictures, Video of Consequence Management Response...

    Energy Savers [EERE]

    Releases Pictures, Video of Consequence Management Response Teams Deploying to Japan NNSA Releases Pictures, Video of Consequence Management Response Teams Deploying to Japan March...

  5. The Department of Energy Releases Draft of Cybersecurity Risk...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Releases Draft of Cybersecurity Risk Management Process (RMP) Guideline for Public Comment (September 2011) The Department of Energy Releases Draft of Cybersecurity Risk...

  6. Sandia National Laboratories Releases Literature Survey of Crude...

    Energy Savers [EERE]

    Sandia National Laboratories Releases Literature Survey of Crude Oil Properties Relevant to Handling and Fire Safety in Transport Sandia National Laboratories Releases Literature...

  7. Low Temperature Heat Release Behavior of Conventional and Alternative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Heat Release Behavior of Conventional and Alternative Fuels in a Motored Engine Low Temperature Heat Release Behavior of Conventional and Alternative Fuels in a...

  8. Efficiency Nova Scotia Releases Energy Efficiency Mobile App...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency Nova Scotia Releases Energy Efficiency Mobile App Efficiency Nova Scotia Releases Energy Efficiency Mobile App Graphic of the inside of a house, with table and chairs,...

  9. DOE Releases EPRI Report on Benefits of Regional Coordination...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Releases EPRI Report on Benefits of Regional Coordination in Wind Energy Transfers DOE Releases EPRI Report on Benefits of Regional Coordination in Wind Energy Transfers February...

  10. Dense gas dispersion modeling for aqueous releases 

    E-Print Network [OSTI]

    Lara, Armando

    1999-01-01T23:59:59.000Z

    DENSE GAS DISPERSION MODELING FOR AQUEOUS RELEASES A Thesis by ARMANDO LARA Submitted to the Office of Graduate Studies of Texas A&M University In partial fulfill ment of the requirements for the degree of MASTER OF SCIENCE May 1999 Major... Modeling for Aqueous Releases. (May 1999) Armando Lara, B. S. , University of Houston Chair of Advisory Committee: Dr. Sam Mannan Production, transportation, and storage of hazardous chemicals represent potential risks to the environment, the public...

  11. Experimental quantum field theory

    E-Print Network [OSTI]

    Bell, J S

    1977-01-01T23:59:59.000Z

    Presented here, is, in the opinion of the author, the essential minimum of quantum field theory that should be known to cultivated experimental particle physicists. The word experimental describes not only the audience aimed at but also the level of mathematical rigour aspired to. (0 refs).

  12. New Perspectives for the Spent Nuclear Fuel Radionuclides Release Model in a Deep Geological Repository

    SciTech Connect (OSTI)

    Poinssot, Christophe; Ferry, Cecile; Poulesquen, Arnaud [Department of Physics and Chemistry, Service for the Studies of the Radionuclides Behaviour, CEA, Nuclear Energy Division, CEA Saclay, BP.11, Gif Sur Yvette, F-91650 (France)

    2007-07-01T23:59:59.000Z

    Spent Nuclear Fuel (SNF) source terms are used to define the release rate of radionuclides (RN) in a direct disposal and to assess the performance of this waste form. They classically distinguish between two contributions: (i) the Instant Release Fraction (IRF) of RN which are directly leached when water contacts the fuel, (ii) the slow and long term release of RN which are embedded within the fuel matrix. Recent experimental results bring significant input in our understanding and assessment of both contributions. However, they have not yet been integrated in the definition of the SNF source term. This paper will present the impact on the RN source term of the latest results on the SNF long term evolution and the key remaining scientific issues. (authors)

  13. Study on release and transport of aerial radioactive materials in reprocessing plants

    SciTech Connect (OSTI)

    Amano, Y.; Tashiro, S.; Uchiyama, G.; Abe, H.; Yamane, Y.; Yoshida, K. [Japan Atomic Energy Agency, 2-4 Shirane, Shirakata, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Kodama, T. [Japan Nuclear Fuel Ltd., 4-108 Okitsuke, Obuchi, Rokkasho-mura, Kamikita-gun, Aomori, 039-3212 (Japan)

    2013-07-01T23:59:59.000Z

    The release and transport characteristics of radioactive materials at a boiling accident of the high active liquid waste (HALW) in a reprocessing plant have been studied for improving experimental data of source terms of the boiling accident. In the study, a heating test and a thermogravimetry and differential thermal analysis (TG-DTA) test were conducted. In the heating test using a simulated HALW, it was found that ruthenium was mainly released into the air in the form of gas and that non-volatile elements were released into the air in the form of mist. In the TG-DTA test, the rate constants and reaction heat of thermal decomposition of ruthenium nitrosyl nitrate were obtained from TG and DTA curves. (authors)

  14. Progress in tritium retention and release modeling for ceramic breeders

    SciTech Connect (OSTI)

    Raffray, A.R.; Federici, G. [Max-Planck-Institut fuer Plasmaphysik, Muenchen (Germany)] [and others

    1994-12-31T23:59:59.000Z

    An important aspect of the design and analysis of ceramic breeder blankets is the ability to predict the phenomenological behavior of tritium in the ceramic breeder under operating reactor conditions. By understanding the behavior of tritium in such materials, analysis and accurate predictions can be made regarding the blanket tritium release and inventory which are key design issues based on safety and fuel self-sufficiency considerations. This paper highlights the progress in tritium modeling over the last decade. Key tritium transport mechanisms are briefly described along with the more recent and sophisticated models developed to help understand them. Recent experimental data are highlighted and model calibration and validation discussed. Finally, example applications to blanket cases are shown as illustration of current predictions for ceramic breeder blanket tritium inventory.

  15. Representative Atmospheric Plume Development for Elevated Releases

    SciTech Connect (OSTI)

    Eslinger, Paul W.; Lowrey, Justin D.; McIntyre, Justin I.; Miley, Harry S.; Prichard, Andrew W.

    2014-03-03T23:59:59.000Z

    An atmospheric explosion of a low-yield nuclear device will produce a large number of radioactive isotopes, some of which can be measured with airborne detection systems. However, properly equipped aircraft may not arrive in the region where an explosion occurred for a number of hours after the event. Atmospheric conditions will have caused the radioactive plume to move and diffuse before the aircraft arrives. The science behind predicting atmospheric plume movement has advanced enough that the location of the maximum concentrations in the plume can be determined reasonably accurately in real time, or near real time. Given the assumption that an aircraft can follow a plume, this study addresses the amount of atmospheric dilution expected to occur in a representative plume as a function of time past the release event. The approach models atmospheric transport of hypothetical releases from a single location for every day in a year using the publically available HYSPLIT code. The effective dilution factors for the point of maximum concentration in an elevated plume based on a release of a non-decaying, non-depositing tracer can vary by orders of magnitude depending on the day of the release, even for the same number of hours after the release event. However, the median of the dilution factors based on releases for 365 consecutive days at one site follows a power law relationship in time, as shown in Figure S-1. The relationship is good enough to provide a general rule of thumb for estimating typical future dilution factors in a plume starting at the same point. However, the coefficients of the power law function may vary for different release point locations. Radioactive decay causes the effective dilution factors to decrease more quickly with the time past the release event than the dilution factors based on a non-decaying tracer. An analytical expression for the dilution factors of isotopes with different half-lives can be developed given the power law expression for the non-decaying tracer. If the power-law equation for the median dilution factor, Df, based on a non-decaying tracer has the general form Df=a?×t?^(-b) for time t after the release event, then the equation has the form Df=e^(-?t)×a×t^(-b) for a radioactive isotope, where ? is the decay constant for the isotope.

  16. Version , Release 0.5 NICHOLAS M GLYKOS,

    E-Print Network [OSTI]

    Glykos, Nikolaos

    Version ¡ , Release 0.5 NICHOLAS M GLYKOS, ¢¤£¤£¦¥ #12;Pepinsky's Machine, Version , Release 0.5!B!")$§")$D3'E)F1"2!23'94©!#763'5§!B!GH§¨7©7B #12;Pepinsky's Machine, Version , Release 0.5, NMG ¡£¢¤¢¦¥ 2 Contents 1 Recent additions 3 1.1 Version ¡ , Release 0.5

  17. Nuclear test experimental science

    SciTech Connect (OSTI)

    Struble, G.L.; Middleton, C.; Bucciarelli, G.; Carter, J.; Cherniak, J.; Donohue, M.L.; Kirvel, R.D.; MacGregor, P.; Reid, S. (eds.)

    1989-01-01T23:59:59.000Z

    This report discusses research being conducted at Lawrence Livermore Laboratory under the following topics: prompt diagnostics; experimental modeling, design, and analysis; detector development; streak-camera data systems; weapons supporting research.

  18. Release Resistant Electrical Interconnections For Mems Devices

    DOE Patents [OSTI]

    Peterson, Kenneth A. (Albuquerque, NM); Garrett, Stephen E. (Albuquerque, NM); Reber, Cathleen A. (Corrales, NM)

    2005-02-22T23:59:59.000Z

    A release resistant electrical interconnection comprising a gold-based electrical conductor compression bonded directly to a highly-doped polysilicon bonding pad in a MEMS, IMEMS, or MOEMS device, without using any intermediate layers of aluminum, titanium, solder, or conductive adhesive disposed in-between the conductor and polysilicon pad. After the initial compression bond has been formed, subsequent heat treatment of the joint above 363 C creates a liquid eutectic phase at the bondline comprising gold plus approximately 3 wt % silicon, which, upon re-solidification, significantly improves the bond strength by reforming and enhancing the initial bond. This type of electrical interconnection is resistant to chemical attack from acids used for releasing MEMS elements (HF, HCL), thereby enabling the use of a "package-first, release-second" sequence for fabricating MEMS devices. Likewise, the bond strength of an Au--Ge compression bond may be increased by forming a transient liquid eutectic phase comprising Au-12 wt % Ge.

  19. Environmental releases for calendar year 1994

    SciTech Connect (OSTI)

    Gleckler, B.P.

    1995-07-01T23:59:59.000Z

    This report fulfills the annual environmental release reporting requirements of US Department of Energy (DOE) Orders. This report provides supplemental information to the Hanford Site Environmental Report. The Hanford Site Environmental Report provides an update on the environmental status of the entire Hanford Site. The sitewide annual report summarizes the degree of compliance of the Hanford Site with applicable environmental regulations and informs the public about the impact of Hanford operations on the surrounding environment. Like the Hanford Site Environmental Report, this annual report presents a summary of the environmental releases from facilities managed by the Westinghouse Hanford Company (WHC) and monitored by Bechtel Hanford, Incorporated (BHI). In addition to the summary data, this report also includes detailed data on air emissions, liquid effluents, and hazardous substances released to the environment during calendar year 1994 from these facilities.

  20. Experimental Network Testbeds

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A This photo shows one of theHall 100G SDN

  1. SSRL- Experimental Run Schedule

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited ReleaseWelcome ton n u aOct. 29,workshop onSSRL and

  2. Temperature actuated automatic safety rod release

    DOE Patents [OSTI]

    Hutter, E.; Pardini, J.A.; Walker, D.E.

    1984-03-13T23:59:59.000Z

    A temperature-actuated apparatus is disclosed for releasably supporting a safety rod in a nuclear reactor, comprising a safety rod upper adapter having a retention means, a drive shaft which houses the upper adapter, and a bimetallic means supported within the drive shaft and having at least one ledge which engages a retention means of the safety rod upper adapter. A pre-determined increase in temperature causes the bimetallic means to deform so that the ledge disengages from the retention means, whereby the bimetallic means releases the safety rod into the core of the reactor.

  3. Temperature actuated automatic safety rod release

    DOE Patents [OSTI]

    Hutter, Ernest (Wilmette, IL); Pardini, John A. (Brookfield, IL); Walker, David E. (Naperville, IL)

    1987-01-01T23:59:59.000Z

    A temperature-actuated apparatus is disclosed for releasably supporting a safety rod in a nuclear reactor, comprising a safety rod upper adapter having a retention means, a drive shaft which houses the upper adapter, and a bimetallic means supported within the drive shaft and having at least one ledge which engages a retention means of the safety rod upper adapter. A pre-determined increase in temperature causes the bimetallic means to deform so that the ledge disengages from the retention means, whereby the bimetallic means releases the safety rod into the core of the reactor.

  4. Xyce parallel electronic simulator release notes.

    SciTech Connect (OSTI)

    Keiter, Eric Richard; Hoekstra, Robert John; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Thornquist, Heidi K.; Rankin, Eric Lamont; Coffey, Todd Stirling; Pawlowski, Roger Patrick; Santarelli, Keith R.

    2010-05-01T23:59:59.000Z

    The Xyce Parallel Electronic Simulator has been written to support, in a rigorous manner, the simulation needs of the Sandia National Laboratories electrical designers. Specific requirements include, among others, the ability to solve extremely large circuit problems by supporting large-scale parallel computing platforms, improved numerical performance and object-oriented code design and implementation. The Xyce release notes describe: Hardware and software requirements New features and enhancements Any defects fixed since the last release Current known defects and defect workarounds For up-to-date information not available at the time these notes were produced, please visit the Xyce web page at http://www.cs.sandia.gov/xyce.

  5. Alteration and release of aliphatic compounds by the polychaete Nereis virens (Sars) experimentally fed with

    E-Print Network [OSTI]

    Boyer, Edmond

    with time and no microbial hydrocarbon biodegradation were evidenced. Our results suggest that marine worm an important role with regard to the fate of hydrocarbon pollutants (Lee and Swartz, 1980). Previous works their bioavailability (Mihelcic and Luthy, 1991; Madsen et al., 1997) and resulting bacterial biodegradation (Gordon et

  6. Alteration and release of aliphatic compounds by the polychaete Nereis virens (Sars) experimentally fed with

    E-Print Network [OSTI]

    Mailhes, Corinne

    with time and no microbial hydrocarbon biodegradation were evidenced. Our results suggest that marine worm `bioturbation' play an important role with regard to the fate of hydrocarbon pollutants (Lee and Swartz, 1980 biodegradation (Gordon et al., 1978; Bauer et al., 1988; McElroy et al., 1990). In areas of intensive reworking

  7. Matrix tablets are drug delivery devices that release a water-soluble drug over an extended period of time. Such matrix tablets are formulated from mixtures of drug, polymer, and excipient

    E-Print Network [OSTI]

    Hinow, Peter

    Summary Matrix tablets are drug delivery devices that release a water-soluble drug over an extended period of time. Such matrix tablets are formulated from mixtures of drug, polymer, and excipient powders variation in the drug release profile of the tablet. While fabrication of experimental tablets

  8. Experimental Scattershot Boson Sampling

    E-Print Network [OSTI]

    Marco Bentivegna; Nicolò Spagnolo; Chiara Vitelli; Fulvio Flamini; Niko Viggianiello; Ludovico Latmiral; Paolo Mataloni; Daniel J. Brod; Ernesto F. Galvão; Andrea Crespi; Roberta Ramponi; Roberto Osellame; Fabio Sciarrino

    2015-05-14T23:59:59.000Z

    Boson Sampling is a computational task strongly believed to be hard for classical computers, but efficiently solvable by orchestrated bosonic interference in a specialised quantum computer. Current experimental schemes, however, are still insufficient for a convincing demonstration of the advantage of quantum over classical computation. A new variation of this task, Scattershot Boson Sampling, leads to an exponential increase in speed of the quantum device, using a larger number of photon sources based on parametric downconversion. This is achieved by having multiple heralded single photons being sent, shot by shot, into different random input ports of the interferometer. Here we report the first Scattershot Boson Sampling experiments, where six different photon-pair sources are coupled to integrated photonic circuits. We employ recently proposed statistical tools to analyse our experimental data, providing strong evidence that our photonic quantum simulator works as expected. This approach represents an important leap toward a convincing experimental demonstration of the quantum computational supremacy.

  9. MEDIA RELEASE NEW ERA BEGINS AS

    E-Print Network [OSTI]

    Peters, Richard

    MEDIA RELEASE NEW ERA BEGINS AS THE AGE AND THE SYDNEY MORNING HERALD COMPACT EDITIONS ARE LAUNCHED Media CEO, Jack Matthews, said. As the presses rolled on the new weekday The Age and Herald, new -biggest change ever undertaken by Fairfax- -new format is easier to pick up, harder to put down- March 4

  10. Passive ice freezing-releasing heat pipe

    DOE Patents [OSTI]

    Gorski, Anthony J. (Lemont, IL); Schertz, William W. (Batavia, IL)

    1982-01-01T23:59:59.000Z

    A heat pipe device has been developed which permits completely passive ice formation and periodic release of ice without requiring the ambient temperature to rise above the melting point of water. This passive design enables the maximum amount of cooling capacity to be stored in the tank.

  11. JANUARY 12, 2011 REDACTED FOR PUBLIC RELEASE

    E-Print Network [OSTI]

    Christian, Eric

    ____________________________________________________________________________ REPORT. NO. IG-11-010-R OFFICE OF AUDITS REVIEW OF NASA'S MANAGEMENT OF ITS SMALL BUSINESS INNOVATION RESEARCH PROGRAM OFFICE OF INSPECTOR GENERAL National Aeronautics and Space Administration #12;REDACTED FOR PUBLIC RELEASE REPORT No. IG-11-010-R-R THE FULL VERSION OF APPENDICES B AND E TO THIS REPORT INCLUDED

  12. A, Science Service Feature Released upon receipt

    E-Print Network [OSTI]

    A, Science Service Feature Released upon receipt but intended for use July 21, 1933 ? WHY THE J every summer i n the United States and southern Canada. A citizen of South Dakota, where the mercury, i a population Of 120,000. ( A l l rights reserved by Science Service, Inc.) SCIENCE SBVICE Washington, D.C. 21st

  13. CCPPressRelease 13 June 2008

    E-Print Network [OSTI]

    Feigon, Brooke

    in prison for the worldwide price fixing of flexible marine hoses, used to transport oil between tankersCCPPressRelease 13 June 2008 Stiff sentences in first criminal price fixing case fail to make a big Stephan ­ t: 07712 343600 or 01603 259560 e: a.stephan@uea.ac.uk Stiff sentences in first criminal price

  14. A BCience Service Feature Released oil receipt

    E-Print Network [OSTI]

    A BCience Service Feature Released oil receipt but intended for use September 10, 1929. ? 'WXY TKE Canada, the United States (including Alaska and a West Indian service), Mexico, Costa Rica, Canal Zone there are services for Australia, New Zealand and Samoa& (All rights reserved- by---_Science--- Service, Inc

  15. Journal of Climate EARLY ONLINE RELEASE

    E-Print Network [OSTI]

    Hu, Yongyun

    investigate the climate dynamic feedbacks during a transition from the present climate7 to the extremely coldJournal of Climate EARLY ONLINE RELEASE This is a preliminary PDF of the author-produced manuscript. Hu, 2011: The initiation of modern "soft Snowball" and "hard Snowball" climates in CCSM3. Part II

  16. University of Alberta Library Release Form

    E-Print Network [OSTI]

    Alberta, University of

    University of Alberta Library Release Form Name of Author: Brett Poulin Title of Thesis: Sequence granted to the University of Alberta Library to reproduce sin- gle copies of this thesis and to lend techniques in the con- text of the high-throughput and automated classification task. A recently developed

  17. For Immediate Release June 28, 2001

    E-Print Network [OSTI]

    For Immediate Release June 28, 2001 CRAIG AND FEINSTEIN INTRODUCE BILL TO ADVANCE NEW ENERGY SOURCE WASHINGTON DC - Senators Larry Craig (R-ID) and Dianne Feinstein (D-CA) introduced today the Fusion Energy Sciences Act of 2001, a bill to strengthen the fusion program at the Department of Energy and speed up

  18. SAND93-2591 Unlimited Release

    E-Print Network [OSTI]

    McCurley, Kevin

    was performed under U.S. Department of Energy contract number DE-AC04-76DP00789. This report has been revisedSAND93-2591 Unlimited Release First Printed October 1992 Revised October 29, 1993 Revised June 22. In this report we describe a portable and efficient implementation of SHA-1 in the C language. Performance

  19. Joint News Release ELEVENTH ITER NEGOTIATIONS MEETING

    E-Print Network [OSTI]

    of Science and Technology of China Department of International Co-operation Luo Delong luodl@mail.most.govJoint News Release ELEVENTH ITER NEGOTIATIONS MEETING CHENGDU , CHINA, 24OCTOBER 2005 Delegations from China, European Union, Japan, the Republic of Korea, the Russian Federation and the United States

  20. Title III section 313 release reporting guidance: Estimating chemical releases from rubber production and compounding

    SciTech Connect (OSTI)

    Not Available

    1988-03-01T23:59:59.000Z

    Facilities engaged in rubber production and compounding may be required to report annually any releases to the environment of certain chemicals regulated under Section 313, Title III, of the Superfund Amendments and Reauthorization Act (SARA) of 1986. The document has been developed to assist those who produce rubber in the completion of Part III (Chemical Specific Information) of the Toxic Chemical Release Inventory Reporting Form. Included herein is general information on toxic chemicals used and process wastes generated, along with several examples to demonstrate the types of data needed and various methodologies available for estimating releases.

  1. Experimental probes of axions

    SciTech Connect (OSTI)

    Chou, Aaron S.; /Fermilab

    2009-10-01T23:59:59.000Z

    Experimental searches for axions or axion-like particles rely on semiclassical phenomena resulting from the postulated coupling of the axion to two photons. Sensitive probes of the extremely small coupling constant can be made by exploiting familiar, coherent electromagnetic laboratory techniques, including resonant enhancement of transitions using microwave and optical cavities, Bragg scattering, and coherent photon-axion oscillations. The axion beam may either be astrophysical in origin as in the case of dark matter axion searches and solar axion searches, or created in the laboratory from laser interactions with magnetic fields. This note is meant to be a sampling of recent experimental results.

  2. Radioactive Fission Product Release from Defective Light Water Reactor Fuel Elements

    SciTech Connect (OSTI)

    Konyashov, Vadim V.; Krasnov, Alexander M. [State Scientific Centre of Russian Federation-Research Institute of Atomic Reactors (Russian Federation)

    2002-04-15T23:59:59.000Z

    Results are provided of the experimental investigation of radioactive fission product (RFP) release, i.e., krypton, xenon, and iodine radionuclides from fuel elements with initial defects during long-term (3 to 5 yr) irradiation under low linear power (5 to 12 kW/m) and during special experiments in the VK-50 vessel-type boiling water reactor.The calculation model for the RFP release from the fuel-to-cladding gap of the defective fuel element into coolant was developed. It takes into account the convective transport in the fuel-to-cladding gap and RFP sorption on the internal cladding surface and is in good agreement with the available experimental data. An approximate analytical solution of the transport equation is given. The calculation dependencies of the RFP release coefficients on the main parameters such as defect size, fuel-to-cladding gap, temperature of the internal cladding surface, and radioactive decay constant were analyzed.It is shown that the change of the RFP release from the fuel elements with the initial defects during long-term irradiation is, mainly, caused by fuel swelling followed by reduction of the fuel-to-cladding gap and the fuel temperature. The calculation model for the RFP release from defective fuel elements applicable to light water reactors (LWRs) was developed. It takes into account the change of the defective fuel element parameters during long-term irradiation. The calculation error according to the program does not exceed 30% over all the linear power change range of the LWR fuel elements (from 5 to 26 kW/m)

  3. Hybridization and Selective Release of DNA Microarrays

    SciTech Connect (OSTI)

    Beer, N R; Baker, B; Piggott, T; Maberry, S; Hara, C M; DeOtte, J; Benett, W; Mukerjee, E; Dzenitis, J; Wheeler, E K

    2011-11-29T23:59:59.000Z

    DNA microarrays contain sequence specific probes arrayed in distinct spots numbering from 10,000 to over 1,000,000, depending on the platform. This tremendous degree of multiplexing gives microarrays great potential for environmental background sampling, broad-spectrum clinical monitoring, and continuous biological threat detection. In practice, their use in these applications is not common due to limited information content, long processing times, and high cost. The work focused on characterizing the phenomena of microarray hybridization and selective release that will allow these limitations to be addressed. This will revolutionize the ways that microarrays can be used for LLNL's Global Security missions. The goals of this project were two-fold: automated faster hybridizations and selective release of hybridized features. The first study area involves hybridization kinetics and mass-transfer effects. the standard hybridization protocol uses an overnight incubation to achieve the best possible signal for any sample type, as well as for convenience in manual processing. There is potential to significantly shorten this time based on better understanding and control of the rate-limiting processes and knowledge of the progress of the hybridization. In the hybridization work, a custom microarray flow cell was used to manipulate the chemical and thermal environment of the array and autonomously image the changes over time during hybridization. The second study area is selective release. Microarrays easily generate hybridization patterns and signatures, but there is still an unmet need for methodologies enabling rapid and selective analysis of these patterns and signatures. Detailed analysis of individual spots by subsequent sequencing could potentially yield significant information for rapidly mutating and emerging (or deliberately engineered) pathogens. In the selective release work, optical energy deposition with coherent light quickly provides the thermal energy to single spots to release hybridized DNA. This work leverages LLNL expertise in optics, microfluids, and bioinformatics.

  4. Analysis of LNG peakshaving-facility release-prevention systems

    SciTech Connect (OSTI)

    Pelto, P.J.; Baker, E.G.; Powers, T.B.; Schreiber, A.M.; Hobbs, J.M.; Daling, P.M.

    1982-05-01T23:59:59.000Z

    The purpose of this study is to provide an analysis of release prevention systems for a reference LNG peakshaving facility. An overview assessment of the reference peakshaving facility, which preceeded this effort, identified 14 release scenarios which are typical of the potential hazards involved in the operation of LNG peakshaving facilities. These scenarios formed the basis for this more detailed study. Failure modes and effects analysis and fault tree analysis were used to estimate the expected frequency of each release scenario for the reference peakshaving facility. In addition, the effectiveness of release prevention, release detection, and release control systems were evaluated.

  5. Experimental Neutrino Physics

    ScienceCinema (OSTI)

    Chris Walter

    2010-01-08T23:59:59.000Z

    In this talk, I will review how a set of experiments in the last decade has given us our current understanding of neutrino properties.  I will show how experiments in the last year or two have clarified this picture, and will discuss how new experiments about to start will address remaining questions.  I will particularly emphasize the relationship between various experimental techniques.

  6. Experimental Capabilities & Apparatus

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    top-10 green building product" by BuildingGreen, Inc. at the US Green Building Council's annual GreenBuildExperimental Capabilities & Apparatus Directory Building Technologies Research and Integration Center #12;Building Technologies Research Oak Ridge National Laboratory's (ORNL) Building Technologies

  7. Primary system fission product release and transport: A state-of-the-art report to the committee on the safety of nuclear installations

    SciTech Connect (OSTI)

    Wright, A.L. [Oak Ridge National Lab., TN (United States)

    1994-06-01T23:59:59.000Z

    This report presents a summary of the status of research activities associated with fission product behavior (release and transport) under severe accident conditions within the primary systems of water-moderated and water-cooled nuclear reactors. For each of the areas of fission product release and fission product transport, the report summarizes relevant information on important phenomena, major experiments performed, relevant computer models and codes, comparisons of computer code calculations with experimental results, and general conclusions on the overall state of the art. Finally, the report provides an assessment of the overall importance and knowledge of primary system release and transport phenomena and presents major conclusions on the state of the art.

  8. Energy Department Releases Report, Evaluates Potential for Wind...

    Energy Savers [EERE]

    Releases Report, Evaluates Potential for Wind Power in All 50 States Energy Department Releases Report, Evaluates Potential for Wind Power in All 50 States May 19, 2015 - 11:38am...

  9. Evaluation of capacity release transactions in the natural gas industry

    E-Print Network [OSTI]

    Lautzenhiser, Stephen

    1994-01-01T23:59:59.000Z

    The purpose of this thesis is to analyze capacity release transactions in the natural gas industry and to state some preliminary conclusions about how the capacity release market is functioning. Given FERC's attempt to ...

  10. Hydrogen Release Studies of Alkali Metal Amidoboranes. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release Studies of Alkali Metal Amidoboranes. Hydrogen Release Studies of Alkali Metal Amidoboranes. Abstract: A series of metal amido boranes LiNH2BH3 (LAB), NaNH2BH3 (SAB),...

  11. Synergy between pathogen release and resource availability in plant invasion

    E-Print Network [OSTI]

    Crews, Stephen

    Synergy between pathogen release and resource availability in plant invasion Dana Blumenthala,1, increased resource availability and enemy release, may more effectively explain invasion if they favor levels of available resources in their native range are particularly susceptible to enemies

  12. Single microbe trap and release in sub-microfluidics. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Single microbe trap and release in sub-microfluidics. Single microbe trap and release in sub-microfluidics. Abstract: Lab-on-a-chip systems have substantially impacted the way...

  13. Home Energy Score Program Update and New Scoring Tool Release...

    Energy Savers [EERE]

    and New Scoring Tool Release Webinar (Text Version) Home Energy Score Program Update and New Scoring Tool Release Webinar (Text Version) Below is the text-alternative version of...

  14. SEPA Press Releases | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release PrintedDEVIATIONSReduce Waste and link to

  15. Release of the ENDF/B-VII.1 Evaluated Nuclear Data File

    SciTech Connect (OSTI)

    Brown, David

    2012-06-30T23:59:59.000Z

    The Cross Section Evaluation Working Group (CSEWG) released the ENDF/B-VII.1 library on December 22, 2011. The ENDF/B-VII.1 library is CSEWG's latest recommended evaluated nuclear data file for use in nuclear science and technology applications, and incorporates advances made in the five years since the release of ENDF/B-VII.0, including: many new evaluation in the neutron sublibrary (423 in all and over 190 of these contain covariances), new fission product yields and a greatly improved decay data sublibrary. This summary barely touches on the five years worth of advances present in the ENDF/B-VII.1 library. We expect that these changes will lead to improved integral performance in reactors and other applications. Furthermore, the expansion of covariance data in this release will allow for better uncertainty quantification, reducing design margins and costs. The ENDF library is an ongoing and evolving effort. Currently, the ENDF data community embarking on several parallel efforts to improve library management: (1) The adoption of a continuous integration system to provide evaluators 'instant' feedback on the quality of their evaluations and to provide data users with working 'beta' quality libraries in between major releases. (2) The transition to new hierarchical data format - the Generalized Nuclear Data (GND) format. We expect GND to enable new kinds of evaluated data which cannot be accommodated in the legacy ENDF format. (3) The development of data assimilation and uncertainty propagation techniques to enable the consistent use of integral experimental data in the evaluation process.

  16. Influence of the Combustion Energy Release on Surface Accelerations of an HCCI Engine

    SciTech Connect (OSTI)

    Massey, Jeffery A [ORNL; Eaton, Scott J [ORNL; Wagner, Robert M [ORNL

    2009-01-01T23:59:59.000Z

    Large cyclic variability along with increased combustion noise present in low temperature combustion (LTC) modes of internal combustion engines has driven the need for fast response, robust sensors for diagnostics and feedback control. Accelerometers have been shown as a possible technology for diagnostics and feedback control of advanced LTC operation in internal combustion engines. To make better use of this technology, an improved understanding is necessary of the effect of energy release from the combustion process on engine surface vibrations. This study explores the surface acceleration response for a single-cylinder engine operating with homogeneous charge compression ignition (HCCI) combustion. Preliminary investigation of the engine surface accelerations is conducted using a finite element analysis of the engine cylinder jacket along with consideration of cylindrical modes of the engine cylinder. Measured in-cylinder pressure is utilized as a load input to the FE model to provide an initial comparison of the computed and measured surface accelerations. Additionally, the cylindrical cavity resonant modes of the engine geometry are computed and the in-cylinder pressure frequency content is examined to verify this resonant behavior. Experimental correlations between heat release and surface acceleration metrics are then used to identify specific acceleration frequency bands in which characteristics of the combustion heat release process is detected with minimal structural resonant influence. Investigation of a metric capable of indicting combustion phasing is presented. Impact of variations in the combustion energy release process on the surface accelerations is discussed.

  17. US Releases Updated Plutonium Inventory Report | National Nuclear...

    National Nuclear Security Administration (NNSA)

    Releases Updated Plutonium Inventory Report | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  18. -A --Science -.-Service Featum Released upon rece fpt

    E-Print Network [OSTI]

    -A --Science -.-Service Featum Released upon rece fpt but intended for use April 28, 1933. 7 WHYWV@A!EDR

  19. Protocols for Authorized Release of Concrete

    SciTech Connect (OSTI)

    Smith, Agatha Marie; Meservey, Richard Harlan; Chen, S.Y.; Powell, James Edward; PArker, F.

    2000-06-01T23:59:59.000Z

    Much of the clean or slightly contaminated concrete from Decontamination and Decommissioning (D&D) activities could be re-used. Currently, there is no standardized approach, or protocol, for managing the disposition of such materials. Namely, all potential disposition options for concrete, including authorized release for re-use, are generally not fully evaluated in D&D projects, so large quantities have been unduly disposed of as low-level radioactive waste. As a result, costs of D&D have become prohibitively high, hindering expedient cleanup of surplus facilities. The ability to evaluate and implement the option of authorized release of concrete from demolition would result in significant cost savings, while maintaining protection of environmental health and safety, across the Department of Energy (DOE) complex. The Idaho National Engineering and Environmental Laboratory (INEEL), Argonne National Laboratory East (ANL-E), and Vanderbilt University have teamed to develop a protocol for the authorized release of concrete, based on the existing DOE guidance of Order 5400.5, that applies across the DOE complex. The protocol will provide a streamlined method for assessing risks and costs, and reaching optimal disposal options, including re-use of the concrete within the DOE system.

  20. Aerosol Releases from the ICPP July 2005 FINAL REPORT

    E-Print Network [OSTI]

    Aerosol Releases from the ICPP July 2005 FINAL REPORT AEROSOL RELEASES FROM THE IDAHO CHEMICAL, Inc. July 2005 #12;Aerosol Releases from the ICPP July 2005 TABLE OF CONTENTS 1.0 Introduction ......................................... 5-1 5.1 Beta-minus Iodine Aerosol Formation Mechanism

  1. Thermophoretic interaction of heat releasing particles Yu. Dolinskya)

    E-Print Network [OSTI]

    Elperin, Tov

    Thermophoretic interaction of heat releasing particles Yu. Dolinskya) and T. Elperinb) Department investigates thermophoretic force acting at heat releasing absorbing particles near the interface between two of the thermophoretic force is proportional to the rate of heat release absorption by the particle, and its direction

  2. Office of Graduate Studies DISSERTATION AND THESIS RELEASE FORM

    E-Print Network [OSTI]

    Tsien, Roger Y.

    Office of Graduate Studies DISSERTATION AND THESIS RELEASE FORM NAME: PID: PROGRAM: DEGREE QTR & YR IMMEDIATE RELEASE I authorize the Office of Graduate Studies to release my dissertation or thesis to the UC through the library catalog as soon as is feasible after my dissertation/thesis has been filed. EMBARGO

  3. Kinetics of Cd Release from Some Contaminated Calcareous Soils

    SciTech Connect (OSTI)

    Sajadi Tabar, S.; Jalali, M., E-mail: jalali@basu.ac.ir [Bu-Ali Sina University, Department of Soil Science, College of Agriculture (Iran, Islamic Republic of)

    2013-03-15T23:59:59.000Z

    Contamination of soils with heavy metals may pose long-term risk to groundwater quality leading to health implications. Bioavailability of heavy metals, like cadmium (Cd) is strongly affected by sorption and desorption processes. The release of heavy metals from contaminated soils is a major contamination risks to natural waters. The release of Cd from contaminated soils is strongly influenced by its mobility and bioavailability. In this study, the kinetics of Cd desorption from ten samples of contaminated calcareous soils, with widely varying physicochemical properties, were studied using 0.01 M EDTA extraction. The median percentage of Cd released was about 27.7% of the total extractable Cd in the soils. The release of Cd was characterized by an initial fast release rate (of labile fractions) followed by a slower release rate (of less labile fractions) and a model of two first-order reactions adequately describes the observed release of Cd from the studied soil samples. There was positive correlation between the amount of Cd released at first phase of release and Cd in exchangeable fraction, indicating that this fraction of Cd is the main fraction controlling the Cd in the kinetic experiments. There was strongly negative correlation between the amount of Cd released at first and second phases of release and residual fraction, suggesting that this fraction did not contribute in Cd release in the kinetic experiments. The results can be used to provide information for evaluation of Cd potential toxicity and ecological risk from contaminated calcareous soils.

  4. DISSERTATION AND THESIS RELEASE FORM PROGRAM: DEGREE QTR & YR

    E-Print Network [OSTI]

    Talley, Lynne D.

    DISSERTATION AND THESIS RELEASE FORM NAME: PID: PROGRAM: DEGREE QTR & YR IMMEDIATE RELEASE I authorize the Graduate Division to release my dissertation or thesis to the UC California Digital Library catalog as soon as is feasible after my dissertation/thesis has been filed. EMBARGO OF ONE OR TWO YEARS I

  5. Preliminary analysis of graphite dust releasing behavior in accident for HTR

    SciTech Connect (OSTI)

    Peng, W.; Yang, X. Y.; Yu, S. Y.; Wang, J. [Inst. of Nuclear and New Energy Technology, Tsinghua Univ., Beijing100084 (China)

    2012-07-01T23:59:59.000Z

    The behavior of the graphite dust is important to the safety of High Temperature Gas-cooled Reactors. This study investigated the flow of graphite dust in helium mainstream. The analysis of the stresses acting on the graphite dust indicated that gas drag played the absolute leading role. Based on the understanding of the importance of gas drag, an experimental system is set up for the research of dust releasing behavior in accident. Air driven by centrifugal fan is used as the working fluid instead of helium because helium is expensive, easy to leak which make it difficult to seal. The graphite particles, with the size distribution same as in HTR, are added to the experiment loop. The graphite dust releasing behavior at the loss-of-coolant accident will be investigated by a sonic nozzle. (authors)

  6. TOP 2014: Experimental Summary

    E-Print Network [OSTI]

    Christian Schwanenberger

    2015-03-05T23:59:59.000Z

    A summary of the experimental results of the TOP2014 International Workshop in Cannes, France, is presented. This inspiring conference clearly showed the richness and diversity of top-quark physics research. Results cover a very broad spectrum of analyses involving studies of the strong and electroweak interactions of the top quark, high-precision measurements of intrinsic top-quark properties, developments of new tools in top-quark analyses, observations of new Standard Model processes, the interaction between the top quark and the Higgs boson and sensitive searches for new physics beyond the Standard Model.

  7. Electrodeless Experimental Thruster

    SciTech Connect (OSTI)

    Brainerd, Jerome J.; Reisz, Al [Reisz Engineers 2909 Johnson Rd. Huntsville, AL 35805 256-883-2531 (United States)

    2009-03-16T23:59:59.000Z

    An electrodeless experimental electric thruster has been built and tested at the NASA Marshall Space Flight Center (MSFC). The plasma is formed by Electron-Cyclotron Resonance (ECR) absorption of RF waves (microwaves). The RF source operates in the 1 to 2 kW range. The plasma is overdense and is confined radially by an applied axial dc magnetic field. The field is shaped by a strong magnetic mirror on the upstream end and a magnetic nozzle on the downstream end. Argon is used as the propellant. The velocity profile in the exhaust plume has been measured with Laser Induced Fluorescence (LIF). An unusual bimodal velocity profile has been measured.

  8. Experimental Highlights - 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-l 1,Energy Consumers |experimental highlights

  9. Experimental Opportunities with LCLS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-l 1,Energy Consumers |experimental

  10. Data:082d3216-8bd6-415f-9b8d-7cfb58a2decc | Open Energy Information

    Open Energy Info (EERE)

    2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: City of Lamar, Colorado (Utility Company) Effective date: 20100309 End date if known: Rate name:...

  11. Quasi-experimental and experimental approaches to environmental economics

    E-Print Network [OSTI]

    Greenstone, Michael

    2007-01-01T23:59:59.000Z

    This paper argues that an increased application of quasi-experimental and experimental techniques will improve understanding about core environmental economics questions. This argument is supported by a review of the ...

  12. Quasi-experimental and experimental approaches to environmental economics

    E-Print Network [OSTI]

    Greenstone, Michael

    This paper argues that an increased application of quasi-experimental and experimental techniques will improve understanding about core environmental economics questions. This argument is supported by a review of the ...

  13. Proceedings of the Combustion Institute, Volume 28, 2000/pp. 757763 EXPERIMENTAL DETERMINATION OF THE STABILITY MARGIN

    E-Print Network [OSTI]

    Lieuwen, Timothy C.

    757 Proceedings of the Combustion Institute, Volume 28, 2000/pp. 757­763 EXPERIMENTAL DETERMINATION the response of the combustion process heat release to driven flow oscillations and the response determine the stability margin of combustors. Such an approach would enable combustion engi- neers

  14. Statistical sampling method for releasing decontaminated vehicles

    SciTech Connect (OSTI)

    Lively, J.W.; Ware, J.A. [Rust Geotech, Grand Junction, CO (United States)

    1996-06-01T23:59:59.000Z

    Earth moving vehicles (e.g., dump trucks, belly dumps) commonly haul radiologically contaminated materials from a site being remediated to a disposal site. Traditionally, each vehicle must be surveyed before being released. The logistical difficulties of implementing the traditional approach on a large scale demand that an alternative be devised. A statistical method (MIL-STD-105E, {open_quotes}Sampling Procedures and Tables for Inspection by Attributes{close_quotes}) for assessing product quality from a continuous process was adapted to the vehicle decontamination process. This method produced a sampling scheme that automatically compensates and accommodates fluctuating batch sizes and changing conditions without the need to modify or rectify the sampling scheme in the field. Vehicles are randomly selected (sampled) upon completion of the decontamination process to be surveyed for residual radioactive surface contamination. The frequency of sampling is based on the expected number of vehicles passing through the decontamination process in a given period and the confidence level desired. This process has been successfully used for 1 year at the former uranium mill site in Monticello, Utah (a CERCLA regulated clean-up site). The method forces improvement in the quality of the decontamination process and results in a lower likelihood that vehicles exceeding the surface contamination standards are offered for survey. Implementation of this statistical sampling method on Monticello Projects has resulted in more efficient processing of vehicles through decontamination and radiological release, saved hundreds of hours of processing time, provided a high level of confidence that release limits are met, and improved the radiological cleanliness of vehicles leaving the controlled site.

  15. Environmental releases for calendar year 1993

    SciTech Connect (OSTI)

    Thomas, S.P.; Curn, B.L.

    1994-07-01T23:59:59.000Z

    This report presents data on radioactive and nonradioactive materials released into the environment during calendar year 1993 from facilities managed by Westinghouse Hanford Company. As part of this executive summary, comprehensive data summaries of air emissions and liquid effluents in 1993 are displayed in tables. These tables represent the following: radionuclide air emissions data; data on radioactive liquid effluents discharged to the soil; radionuclides discharged to the Columbia River; nonradioactive air emissions data; total volumes and flow rates of 200/600 area liquid effluents. Both summary and detailed presentations of these data are given. When appropriate, comparisons to data from previous years are made.

  16. Idaho National Laboratory News Release Archive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHallNotSeventyTechnologies |InformationnifNews

  17. FORTE antenna element and release mechanism design

    SciTech Connect (OSTI)

    Rohweller, D.J. [Astro Aerospace Corp., Carpinteria, CA (United States); Butler, T.Af. [Los Alamos National Lab., NM (United States)

    1995-02-01T23:59:59.000Z

    The Fast On-Orbit Recording of Transient Events (FORTE) satellite being built by Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL) has as its most prominent feature a large deployable (11 m by 5 m) log periodic antenna to monitor emissions from electrical storms on the Earth. This paper describes the antenna and the design for the long elements and explains the dynamics of their deployment and the damping system employed. It also describes the unique paraffin-actuated reusable tie-down and release mechanism employed in the system.

  18. Latest News Releases | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |Is Your HomeLatest News Releases Tribune carries magnet recycling

  19. Press Releases | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear Press Releases Archive Publications Princeton Journal Watch

  20. Press Releases | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch > TheNuclear Press Releases Archive Publications Princeton Journal

  1. EIA - Annual Energy Outlook 2014 Early Release

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0 Year-1InformationDieselAnnual Energy Outlook 2015 Release

  2. SAND2011-3779 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection TechnicalResonantNovember11-3779 Unlimited Release Printed June 2011

  3. SANDlA REPORT Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd52938SANDlA REPORT

  4. Hydrogen Release Behavior | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), GeothermalGridHYDROGEND D eReview | DepartmentEnergyRelease

  5. MULTIVESSEL BATCH DISTILLATION EXPERIMENTAL VERIFICATION

    E-Print Network [OSTI]

    Skogestad, Sigurd

    MULTIVESSEL BATCH DISTILLATION ­ EXPERIMENTAL VERIFICATION Bernd Wittgens and Sigurd Skogestad 1 The experimental verification of the operation of a multivessel batch distillation column, operated under total vessels, provides a generalization of previously proposed batch distillation schemes. We propose a simple

  6. Research in: Experimental Photonuclear Physics

    E-Print Network [OSTI]

    Saskatchewan, University of

    & Phenomenology Particle Astrophysics & Cosmology Accelerator Physics Health Physics #12;Experimental Photonuclear cryptography #12;Accelerator Physics Dallin, CLS Staff Particle Accelerator Design · Beam Optics · RF systemsResearch in: Experimental Photonuclear Physics Quantum Entanglement Particle Physics Theory

  7. Microfabricated therapeutic actuators and release mechanisms therefor

    DOE Patents [OSTI]

    Lee, Abraham P. (Walnut Creek, CA); Fitch, Joseph P. (Livermore, CA); Schumann, Daniel L. (Concord, CA); Da Silva, Luiz (Danville, CA); Benett, William J. (Livermore, CA); Krulevitch, Peter A. (Pleasanton, CA)

    2000-01-01T23:59:59.000Z

    Microfabricated therapeutic actuators are fabricated using a shape memory polymer (SMP), a polyurethane-based material that undergoes a phase transformation at a specified temperature (Tg). At a temperature above temperature Tg material is soft and can be easily reshaped into another configuration. As the temperature is lowered below temperature Tg the new shape is fixed and locked in as long as the material stays below temperature Tg. Upon reheating the material to a temperature above Tg, the material will return to its original shape. By the use of such SMP material, SMP microtubing can be used as a retaining/release actuator for the delivery of material, such as embolic coils, for example, through catheters into aneurysms, for example. The microtubing can be manufactured in various sizes and the phase change temperature Tg is determinate for an intended temperature target and intended use. The SMP microtubing can be positioned around or within an end of a deposit material. Various heating arrangements can be utilized with the SMP release mechanism, and the SMP microtubing can include a metallic coating for enhanced light absorption.

  8. Overview study of LNG release prevention and control systems

    SciTech Connect (OSTI)

    Pelto, P.J.; Baker, E.G.; Holter, G.M.; Powers, T.B.

    1982-03-01T23:59:59.000Z

    The liquefied natural gas (LNG) industry employs a variety of release prevention and control techniques to reduce the likelihood and the consequences of accidental LNG releases. A study of the effectiveness of these release prevention and control systems is being performed. Reference descriptions for the basic types of LNG facilities were developed. Then an overview study was performed to identify areas that merit subsequent and more detailed analyses. The specific objectives were to characterize the LNG facilities of interest and their release prevention and control systems, identify possible weak links and research needs, and provide an analytical framework for subsequent detailed analyses. The LNG facilities analyzed include a reference export terminal, marine vessel, import terminal, peakshaving facility, truck tanker, and satellite facility. A reference description for these facilities, a preliminary hazards analysis (PHA), and a list of representative release scenarios are included. The reference facility descriptions outline basic process flows, plant layouts, and safety features. The PHA identifies the important release prevention operations. Representative release scenarios provide a format for discussing potential initiating events, effects of the release prevention and control systems, information needs, and potential design changes. These scenarios range from relatively frequent but low consequence releases to unlikely but large releases and are the principal basis for the next stage of analysis.

  9. Radio controlled release apparatus for animal data acquisition devices

    DOE Patents [OSTI]

    Stamps, James Frederick (5252 Norma Way, Livermore, Alameda County, CA 94550)

    2000-01-01T23:59:59.000Z

    A novel apparatus for reliably and selectively releasing a data acquisition package from an animal for recovery. The data package comprises two parts: 1) an animal data acquisition device and 2) a co-located release apparatus. One embodiment, which is useful for land animals, the release apparatus includes two major components: 1) an electronics package, comprising a receiver; a decoder comparator, having at plurality of individually selectable codes; and an actuator circuit and 2) a release device, which can be a mechanical device, which acts to release the data package from the animal. To release a data package from a particular animal, a radio transmitter sends a coded signal which is decoded to determine if the code is valid for that animal data package. Having received a valid code, the release device is activated to release the data package from the animal for subsequent recovery. A second embodiment includes floatation means and is useful for releasing animal data acquisition devices attached to sea animals. This embodiment further provides for releasing a data package underwater by employing an acoustic signal.

  10. ReleasePARENT/GUARDIAN/ADULT PARTICIPANT: PLEASE COMPLETE THE RELEASE AS INDICATED BELOW.

    E-Print Network [OSTI]

    Moore, Paul A.

    hereby release Bowling Green State University, and the BGSU Ice Arena program, its employees, agents by the negligence of Bowling Green State University, its employees, agents and representatives. I further agree to indemnify and hold Bowling Green State University, its employees, agents and representatives harmless from

  11. Experimental Particle Physics

    SciTech Connect (OSTI)

    Rosenfeld, Carl [Univ of South Carolina; Mishra, Sanjib R. [Univ of South Carolina; Petti, Roberto [Univ of South Carolina; Purohit, Milind V. [Univ of South Carolina

    2014-08-31T23:59:59.000Z

    The high energy physics group at the University of South Carolina, under the leadership of Profs. S.R. Mishra, R. Petti, M.V. Purohit, J.R. Wilson (co-PI's), and C. Rosenfeld (PI), engaged in studies in "Experimental Particle Physics." The group collaborated with similar groups at other universities and at national laboratories to conduct experimental studies of elementary particle properties. We utilized the particle accelerators at the Fermi National Accelerator Laboratory (Fermilab) in Illinois, the Stanford Linear Accelerator Center (SLAC) in California, and the European Center for Nuclear Research (CERN) in Switzerland. Mishra, Rosenfeld, and Petti worked predominantly on neutrino experiments. Experiments conducted in the last fifteen years that used cosmic rays and the core of the sun as a source of neutrinos showed conclusively that, contrary to the former conventional wisdom, the "flavor" of a neutrino is not immutable. A neutrino of flavor "e," "mu," or "tau," as determined from its provenance, may swap its identity with one of the other flavors -- in our jargon, they "oscillate." The oscillation phenomenon is extraordinarily difficult to study because neutrino interactions with our instruments are exceedingly rare -- they travel through the earth mostly unimpeded -- and because they must travel great distances before a substantial proportion have made the identity swap. Three of the experiments that we worked on, MINOS, NOvA, and LBNE utilize a beam of neutrinos from an accelerator at Fermilab to determine the parameters governing the oscillation. Two other experiments that we worked on, NOMAD and MIPP, provide measurements supportive of the oscillation experiments. Good measurements of the neutrino oscillation parameters may constitute a "low energy window" on related phenomena that are otherwise unobservable because they would occur only at energies way above the reach of conceivable accelerators. Purohit and Wilson participated in the BaBar experiment, which collected data at SLAC until 2008. They continued to analyze the voluminous BaBar data with an emphasis on precision tests of Quantum Chromodynamics and on properties of the "eta_B," a bottom quark paired in a meson with a strange quark. The ATLAS experiment became the principal research focus for Purohit. One of the world's largest pieces of scientific equipment, ATLAS observes particle collisions at the highest-energy particle accelerator ever built, the Large Hadron Collider (LHC) at CERN. Our efforts on ATLAS included participation in the commissioning, calibration, and installation of components called "CSCs". The unprecedented energy of 14 TeV enabled the ATLAS and CMS collaborations to declare discovery of the famous Higgs particle in 2012.

  12. Modeling downwind hazards after an accidental release of chlorine trifluoride

    SciTech Connect (OSTI)

    Lombardi, D.A.; Cheng, Meng-Dawn

    1996-05-01T23:59:59.000Z

    A module simulating ClF{sub 3} chemical reactions with water vapor and thermodynamic processes in the atmosphere after an accidental release has been developed. This module was liked to the HGSYSTEM. Initial model runs simulate the rapid formation of HF and ClO{sub 2} after an atmospheric release of ClF{sub 3}. At distances beyond the first several meters from the release point, HF and ClO{sub 2} concentrations pose a greater threat to human health than do ClF{sub 3} concentrations. For most of the simulations, ClF{sub 3} concentrations rapidly fall below the IDLH. Fro releases occurring in ambient conditions with low relative humidity and/or ambient temperature, ClF{sub 3} concentrations exceed the IDLH up to almost 500 m. The performance of this model needs to be determined for potential release scenarios that will be considered. These release scenarios are currently being developed.

  13. Approaches for preventing and mitigating accidental gaseous chemical releases

    SciTech Connect (OSTI)

    Fthenakis, V.M.

    1996-12-31T23:59:59.000Z

    This paper presents a review of approaches to prevent and mitigate accidental releases of toxic and flammable gases. The prevention options are related to: choosing safer processes and materials, preventing initiating events, preventing or minimizing releases, and preventing human exposures. the mitigation options include: secondary confinement, de-inventory, vapor barriers, and water sprays/monitors. Guidelines for the design and operation of effective post-release mitigation systems are also presented.

  14. Release mechanism utilizing shape memory polymer material

    DOE Patents [OSTI]

    Lee, Abraham P. (Walnut Creek, CA); Northrup, M. Allen (Berkeley, CA); Ciarlo, Dino R. (Livermore, CA); Krulevitch, Peter A. (Pleasanton, CA); Benett, William J. (Livermore, CA)

    2000-01-01T23:59:59.000Z

    Microfabricated therapeutic actuators are fabricated using a shape memory polymer (SMP), a polyurethane-based material that undergoes a phase transformation at a specified temperature (Tg). At a temperature above temperature Tg material is soft and can be easily reshaped into another configuration. As the temperature is lowered below temperature Tg the new shape is fixed and locked in as long as the material stays below temperature Tg. Upon reheating the material to a temperature above Tg, the material will return to its original shape. By the use of such SMP material, SMP microtubing can be used as a release actuator for the delivery of embolic coils through catheters into aneurysms, for example. The microtubing can be manufactured in various sizes and the phase change temperature Tg is determinate for an intended temperature target and intended use.

  15. Toxic chemical considerations for tank farm releases

    SciTech Connect (OSTI)

    Van Keuren, J.C.; Davis, J.S., Westinghouse Hanford

    1996-08-01T23:59:59.000Z

    This topical report contains technical information used to determine the accident consequences of releases of toxic chemical and gases for the Tank Farm Final Safety Analysis report (FSAR).It does not provide results for specific accident scenarios but does provide information for use in those calculations including chemicals to be considered, chemical concentrations, chemical limits and a method of summing the fractional contributions of each chemical. Tank farm composites evaluated were liquids and solids for double shell tanks, single shell tanks, all solids,all liquids, headspace gases, and 241-C-106 solids. Emergency response planning guidelines (ERPGs) were used as the limits.Where ERPGs were not available for the chemicals of interest, surrogate ERPGs were developed. Revision 2 includes updated sample data, an executive summary, and some editorial revisions.

  16. Nondestructive fission gas release measurement and analysis

    SciTech Connect (OSTI)

    O'Leary, P.M.; Packard, D.R. (Siemens Nuclear Power Corp., Richland, WA (United States))

    1993-01-01T23:59:59.000Z

    Siemens Power Corporation (SPC) has performed reactor poolside gamma scanning measurements of fuel rods for fission gas release (FGR) detection for more than 10 yr. The measurement system has been previously described. Over the years, the data acquisition system, the method of spectrum analysis, and the means of reducing spectrum interference have been significantly improved. A personal computer (PC)-based multichannel analyzer (MCA) package is used to collect, display, and store high-resolution gamma-ray spectra measured in the fuel rod plenum. A PC spread sheet is used to fit the measured spectra and compute sample count rates after Compton background subtraction. A Zircaloy plenum spacer is often used to reduce positron annihilation interference that can arise from the INCONEL[sup [reg sign

  17. Russia clamps downs on data release

    SciTech Connect (OSTI)

    Not Available

    1992-11-30T23:59:59.000Z

    This paper reports that Russia is stepping up enforcement of laws banning unauthorized release of detailed geological and geophysical data to foreign companies. But companies authorized to sell or license information about Russian minerals say the stricter oversight isn't affecting their activities. That's because the effort is intended to curb illegal sales of data by Russian regional organizations and federal agencies. In addition, Russia's state tax department and ministries of finance and justice are considering sanctions to be imposed for violations of lawful procedures. The added vigilance by Russian officials likely will help clear up confusion among foreign companies, resulting from vague laws and regulations, about how and from whom data may be obtained obtained legally.

  18. Control of hydrogen release and uptake in amine borane molecular...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    uptake in amine borane molecular complexes: Thermodynamics of ammonia borane, ammonium Control of hydrogen release and uptake in amine borane molecular complexes: Thermodynamics of...

  19. alkaline fluids released: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is a coarse- to medium-grained rock that occurs Bodnar, Robert J. 2 New Tracers Identify Hydraulic Fracturing Fluids and Accidental Releases from Oil and Gas Operations...

  20. Australian Mining carries rare-earth-like iron release | The...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Australian Mining carries rare-earth-like iron release Australian Mining, the leading news source for the mining industry in Australia, carried a story on research Ames Lab...

  1. atmospheric release advisory: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    based on the raffle 23 MEDIA ADVISORY FOR IMMEDIATE RELEASE MEDIA CONTACT Renewable Energy Websites Summary: ) 691-4105 THE QUEEN'S MEDICAL CENTER PRESENTS EDUCATION AND FREE...

  2. Sandia Energy - Sandia, NREL Release Wave Energy Converter Modeling...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia, NREL Release Wave Energy Converter Modeling and Simulation Code: WEC-Sim Home Renewable Energy Energy Water Power Partnership News News & Events Computational Modeling &...

  3. Sandia National Laboratories Releases Updated Wind Plant Modeling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Releases Updated Wind Plant Modeling Guidelines Revamped Simulation Tool to Power Up Wave Energy Development DOE's AVESTAR Center to Expand Research, Training Opportunities...

  4. NOON TUESDAY: Energy Department to Release New Report on Progress...

    Broader source: Energy.gov (indexed) [DOE]

    Affairs, will host a conference call with reporters to release a new DOE report on electric vehicles. The report will examine progress to date in meeting President Obama's...

  5. News Release Closure of Russian Nuclear Plant.PDF

    National Nuclear Security Administration (NNSA)

    CONTACTS: FOR IMMEDIATE RELEASE Jonathan Kiell, 202586-7371 September 27, 2001 Date Set for Closure of Russian Nuclear Weapons Plant U.S. National Nuclear Security Administration...

  6. New Analysis Center Releases First Report, Evaluates Opportunities...

    Energy Savers [EERE]

    Energy Manufacturing Analysis Center (CEMAC) today announced the release of Automotive Lithium-ion Battery Supply Chain and U.S. Competitiveness Considerations, its first...

  7. DOE Releases Draft Strategic Plan for Reducing Greenhouse Gas...

    Office of Environmental Management (EM)

    Draft Strategic Plan for Reducing Greenhouse Gas Emissions through Deployment of Advanced Technology DOE Releases Draft Strategic Plan for Reducing Greenhouse Gas Emissions through...

  8. aqueous release incident: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Different Types of Polymers on Release Behavior of Salbutamol Sulphate from Coated Pellets CiteSeer Summary: The present study was designed to investigate the effect of...

  9. NREL Releases Report on Policy Options to Advance Geothermal...

    Energy Savers [EERE]

    Geothermal Exploration Policy Mechanisms, was recently released by the National Renewable Energy Laboratory | photo courtesy of Geothermal Resources Council. A new DOE report,...

  10. acting release lar: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    happy for images from Molecular Psychiatry to be reproduced Cai, Long 286 GAINESVILLE POLICE DEPARTMENT PRESS RELEASE Engineering Websites Summary: GAINESVILLE POLICE DEPARTMENT...

  11. anaerobic energy release: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Altyntsev, A; Dudk, J; Kashapova, L 2014-01-01 7 Elementary Energy Release Events in Solar Flares CERN Preprints Summary: Most theoretical investigations of particle...

  12. arthroscopic capsular release: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environmental Sciences and Ecology Websites Summary: MEDIA RELEASE 2 November 2011 Report urges more action to prepare BC for uncertain food future British Columbians should...

  13. Enhancing protection for unusually sensitive ecological areas from pipeline releases

    E-Print Network [OSTI]

    Sames, Christina; Fink, Dennis

    2001-01-01T23:59:59.000Z

    ECOLOGICAL AREAS FROM PIPELINE RELEASES Christina Sames;Administration, Office of Pipeline Safety, DPS-10/ 400 7thof a hazardous liquid pipeline accident. Pipeline operators

  14. Workplace Charging Challenge: Press Release template for Clean Cities coordinators

    Broader source: Energy.gov [DOE]

    An editable press release that Clean Cities coordinators can use to announce local Partners' participation in the EV Everywhere Workplace Charging Challenge

  15. Workplace Charging Challenge: Press Release template for Ambassadors

    Broader source: Energy.gov [DOE]

    An editable press release that Ambassador organizations can use to announce their and local Partners' participation in the EV Everywhere Workplace Charging Challenge

  16. Fission product release from irradiated LWR fuel under accident conditions

    SciTech Connect (OSTI)

    Strain, R.V.; Sanecki, J.E.; Osborne, M.F.

    1984-01-01T23:59:59.000Z

    Fission product release from irradiated LWR fuel is being studied by heating fuel rod segments in flowing steam and an inert carrier gas to simulate accident conditions. Fuels with a range of irradiation histories are being subjected to several steam flow rates over a wide range of temperatures. Fission product release during each test is measured by gamma spectroscopy and by detailed examination of the collection apparatus after the test has been completed. These release results are complemented by a detailed posttest examination of samples of the fuel rod segment. Results of release measurements and fuel rod characterizations for tests at 1400 through 2000/sup 0/C are presented in this paper.

  17. Energy Department Releases New Greenhouse Gas Reporting Guidance...

    Energy Savers [EERE]

    New Greenhouse Gas Reporting Guidance, Seeks Public Comment Energy Department Releases New Greenhouse Gas Reporting Guidance, Seeks Public Comment March 22, 2005 - 10:54am Addthis...

  18. A vacuum microgripping tool with integrated vibration releasing capability

    SciTech Connect (OSTI)

    Rong, Weibin; Fan, Zenghua, E-mail: zenghua-fan@163.com; Wang, Lefeng; Xie, Hui; Sun, Lining [State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin, Heilongjiang (China)

    2014-08-01T23:59:59.000Z

    Pick-and-place of micro-objects is a basic task in various micromanipulation demands. Reliable releasing of micro-objects is usually disturbed due to strong scale effects. This paper focuses on a vacuum micro-gripper with vibration releasing functionality, which was designed and assembled for reliable micromanipulation tasks. Accordingly, a vibration releasing strategy of implementing a piezoelectric actuator on the vacuum microgripping tool is presented to address the releasing problem. The releasing mechanism was illustrated using a dynamic micro contact model. This model was developed via theoretical analysis, simulations and pull-off force measurement using atomic force microscopy. Micromanipulation experiments were conducted to verify the performance of the vacuum micro-gripper. The results show that, with the assistance of the vibration releasing, the vacuum microgripping tool can achieve reliable release of micro-objects. A releasing location accuracy of 4.5±0.5 ?m and a successful releasing rate of around 100% (which is based on 110 trials) were achieved for manipulating polystyrene microspheres with radius of 35–100 ?m.

  19. Prevention, Abatement, and Control of Hazardous Substance Release (Iowa)

    Broader source: Energy.gov [DOE]

    The Department of Natural Resources is authorized to establish rules regarding the prevention and mitigation of hazardous substance release. These sections contain information on the notification...

  20. Building an Efficient Model for Afterburn Energy Release

    SciTech Connect (OSTI)

    Alves, S; Kuhl, A; Najjar, F; Tringe, J; McMichael, L; Glascoe, L

    2012-02-03T23:59:59.000Z

    Many explosives will release additional energy after detonation as the detonation products mix with the ambient environment. This additional energy release, referred to as afterburn, is due to combustion of undetonated fuel with ambient oxygen. While the detonation energy release occurs on a time scale of microseconds, the afterburn energy release occurs on a time scale of milliseconds with a potentially varying energy release rate depending upon the local temperature and pressure. This afterburn energy release is not accounted for in typical equations of state, such as the Jones-Wilkins-Lee (JWL) model, used for modeling the detonation of explosives. Here we construct a straightforward and efficient approach, based on experiments and theory, to account for this additional energy release in a way that is tractable for large finite element fluid-structure problems. Barometric calorimeter experiments have been executed in both nitrogen and air environments to investigate the characteristics of afterburn for C-4 and other materials. These tests, which provide pressure time histories, along with theoretical and analytical solutions provide an engineering basis for modeling afterburn with numerical hydrocodes. It is toward this end that we have constructed a modified JWL equation of state to account for afterburn effects on the response of structures to blast. The modified equation of state includes a two phase afterburn energy release to represent variations in the energy release rate and an afterburn energy cutoff to account for partial reaction of the undetonated fuel.

  1. Pilot-Scale Benzene Retention and Release Demonstration

    SciTech Connect (OSTI)

    Marek, J.C.

    2003-11-10T23:59:59.000Z

    During the initial months of In-Tank Precipitation radioactive operation in 1995 the process experienced high rates of tetraphenylborate decomposition with assumed corresponding high rates of benzene generation. In March 1996 after a two month quiescent period, a water addition to Tank 48H resulted in an unexpected benzene release to the tank vapor phase. This was the first time a low energy input resulted in a significant release rate. This led to questions about how benzene, generated in-situ by TPB decomposition, was retained in the surrounding potassium tetraphenylborate slurry. It was postulated the retention mechanism may have changed during the quiescent period prior to March so the benzene present became readily releasable to the vapor phase with low energy input to the slurry or that enough benzene accumulated that some of it was in a different, more releasable form. Readily releasable is a qualitative term defined as a rapid release of benzene at a rate approaching evaporation of a free benzene layer. It is intended to distinguish between benzene in a form with high liquid phase resistance to mass transfer diffusion controlled from benzene in a form with minimal liquid phase resistance to mass transfer free benzene layer evaporation. If a readily releasable form of benzene was present, the vapor space profile during release tests was anticipated to have an initial benzene vapor space concentration peak followed by a lower vapor concentration, longer duration release.

  2. SANDIA REPORT SAND2014-3416 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SAND2014-3416 Unlimited Release Printed April 2014 Safety, Codes and Standards for Hydrogen Installations: Hydrogen Fueling System Footprint Metric Development A.P. Harris,...

  3. Press Room - Press Releases - U.S. Energy Information Administration...

    Gasoline and Diesel Fuel Update (EIA)

    into the final release, the new tool represents EIA's latest step in making energy data more accessible, understandable, relevant, and responsive to users' needs. The U.S....

  4. SBIR/STTR Release 2 Funding Opportunity Deadline December 15...

    Office of Environmental Management (EM)

    Funding Opportunity Deadline December 15-Includes Hydrogen and Fuel Cells SBIRSTTR Release 2 Funding Opportunity Deadline December 15-Includes Hydrogen and Fuel Cells December 8,...

  5. LMFBR aerosol release and transport program. Quarterly progress report, July-September 1981

    SciTech Connect (OSTI)

    Kress, T.S.; Tobias, M.L.

    1982-01-01T23:59:59.000Z

    This report summarizes progress for the Aerosol Release and Transport Program sponsored by the Office of Nuclear Regulatory Research, Division of Accident Evaluation of the Nuclear Regulatory Commission for the period July-September 1981. Topics discussed include (1) preparations for under-sodium tests at the Fast Aerosol Simulant Test Facility, (2) progress in interpretation of Oak Ridge National Laboratory-Sandia Laboratory normalization test results, (3) U/sub 3/O/sub 8/ in steam (light-water reactor accident) aerosol experiments conducted in the Nuclear Safety Power Plant, (4) experiments on B/sub 2/O/sub 3/ and SiO/sub 2/ aerosols at the Containment Research Installation-II Facility, (5) fuel-melting tests in small-scale experimental facilities for the core-melt aerosol program, (6) analytical comparison of simple adiabatic nonlinear and linear analytical models of bubble oscillation phenomena with experimental data.

  6. Experimental constraints on transport

    SciTech Connect (OSTI)

    Luce, T.C.; Petty, K.H.; Burrell, K.H.; Forest, C.B.; Gohil, P.; Groebner, R.J.; De Haas, J.C.M.; James, R.A.; Makowski, M.A.

    1994-12-01T23:59:59.000Z

    Characterization of the cross-field energy transport in magnetic confinement experiments in a manner applicable to the accurate assessment of future machine performance continues to be a challenging goal. Experimental results from the DIII-D tokamak in the areas of dimensionless scaling and non-diffusive transport represent progress toward this goal. Dimensionless scaling shows how beneficial the increase in machine size and magnetic field is for future devices. The experiments on DIII-D are the first to determine separately the electron and ion scaling with normalized gyroradius {rho}{sub *}; the electrons scale as expected from gyro-Bohm class theories, while the ions scale consistent with the Goldston empirical scaling. This result predicts an increase in transport relative to Bohm diffusion as {rho}{sub *} decreases in future devices. The existence of distinct {rho}{sub *} scalings for ions and electrons cautions against a physical interpretation of one-fluid or global analysis. The second class of experiments reported here are the first to demonstrate the existence of non-diffusive energy transport. Electron cyclotron heating was applied at the half radius; the electron temperature profile remains substantially peaked. Power balance analysis indicates that heat must flow in the direction of increasing temperature, which is inconsistent with purely diffusive transport. The dynamics of electron temperature perturbations indicate the presence in the heat flux of a term dependent on temperature rather than its gradient. These two observations strongly constrain the types of models which can be applied to cross-field heat transport.

  7. Overview of experimental support for fission-product transport analyses at Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Wichner, R.P.

    1983-01-01T23:59:59.000Z

    The program was designed to determine fission product and aerosol release rates from irradiated fuel under accident conditions, to identify the chemical forms of the released material, and to correlate the results with experimental and specimen conditions with the data from related experiments. These tests of PWR fuel were conducted and fuel specimen and test operating data are presented. The nature and rate of fission product vapor interaction with aerosols were studied. Aerosol deposition rates and transport in the reactor vessel during LWR core-melt accidents were studied. The Nuclear Safety Pilot Plant is dedicated to developing an expanded data base on the behavior of aerosols generated during a severe accident.

  8. QUEST2: Release 1, SA/Release 1 supporting documents deliverable set

    SciTech Connect (OSTI)

    Braaten, F.D.

    1995-02-27T23:59:59.000Z

    This document contains deliverables which reflect the last of the System Architecture phase analysis for the Quality, Environmental, Safety Tracking System redesign (QUEST2) project. These deliverables are focused on the final insights required to start functional design of the first QUEST2 release. They include the data definitions, conversion rules, standards for design and user interface, performance criteria, and rules to be followed during the prototyping activity described in the Project Management Plan.

  9. Analysis of LNG import terminal release prevention systems

    SciTech Connect (OSTI)

    Baker, E G

    1982-04-01T23:59:59.000Z

    The release prevention systems of liquefied natural gas (LNG) import terminal were analyzed. A series of potential release scenarios were analyzed to determine the frequency of the release events, the probability these releases are not stopped or isolated by emergency shutdown systems, the estimated release quantities, and the critical components of the system. The two plant areas identified as being most significant with respect to safety are the unloading system and the storage system. Rupture of the main transfer line and gross failure of the storage tanks are the two release scenarios of primary safety interest. Reducing the rate of failure by improved design, better maintenance and testing, or adding redundancy of the critical system components for these plant areas and release scenarios will result in improved safety. Several design alternatives which have the potential to significantly reduce the probability of a large release of LNG occurring at an import terminal are identified. These design alternatives would reduce the probability of a large release of LNG by reducing the expected number of failures which could cause a release or by reducing the magnitude of releases that do occur. All of these alternatives are technically feasible and have been used or considered for use in at least one LNG facility. A more rigorous analysis of the absolute risk of LNG import terminal operation is necessary before the benefits of these design alternatives can be determined. In addition, an economic evaluation of these alternatives must be made so the costs and benefits can be compared. It is concludd that for remotely located facilities many of these alternatives are probably not justified; however, for facilities located in highly populated areas, these alternatives deserve serious consideration.

  10. Kawecki et al: Experimental Evolution 1 Experimental Evolution

    E-Print Network [OSTI]

    Alvarez, Nadir

    Kawecki et al: Experimental Evolution 1 Experimental Evolution Tadeusz J. Kawecki1 in Ecology and Evolution, 27: 547560 (2012) Except for a few changes made in proofs, the content of this preprint is identical with the published version of the paper 1 Department of Ecology and Evolution

  11. Analysis of fission gas release kinetics by on-line mass spectrometry

    SciTech Connect (OSTI)

    Zerega, Y.; Reynard-Carette, C. [Univ. of Provence, Laboratoire Chimie Provence, UMR 6264, Avenue escadrille Normandie - Niemen, F-13397 Marseille (France); Parrat, D. [CEA, Nuclear Energy Div. DEN, CEA Cadarache, F-13108 Saint-Paul-lez-Durance (France); Carette, M. [Univ. of Provence, Laboratoire Chimie Provence, UMR 6264, Avenue escadrille Normandie - Niemen, F-13397 Marseille (France); Brkic, B. [Univ. of Liverpool, Dept. of Electrical Engineering and Electronics, Liverpool L69 3BX (United Kingdom); Lyoussi, A.; Bignan, G. [CEA, Nuclear Energy Div. DEN, CEA Cadarache, F-13108 Saint-Paul-lez-Durance (France); Janulyte, A.; Andre, J. [Univ. of Provence, Laboratoire Chimie Provence, UMR 6264, Avenue escadrille Normandie - Niemen, F-13397 Marseille (France); Pontillon, Y.; Ducros, G. [CEA, Nuclear Energy Div. DEN, CEA Cadarache, F-13108 Saint-Paul-lez-Durance (France); Taylor, S. [Univ. of Liverpool, Dept. of Electrical Engineering and Electronics, Liverpool L69 3BX (United Kingdom)

    2011-07-01T23:59:59.000Z

    The release of fission gas (Xe and Kr) and helium out of nuclear fuel materials in normal operation of a nuclear power reactor can constitute a strong limitation of the fuel lifetime. Moreover, radioactive isotopes of Xe and Kr contribute significantly to the global radiological source term released in the primary coolant circuit in case of accidental situations accompanied by fuel rod loss of integrity. As a consequence, fission gas release investigation is of prime importance for the nuclear fuel cycle economy, and is the driven force of numerous R and D programs. In this domain, for solving current fuel behavior understanding issues, preparing the development of new fuels (e.g. for Gen IV power systems) and for improving the modeling prediction capability, there is a marked need for innovations in the instrumentation field, mainly for: . Quantification of very low fission gas concentrations, released from fuel sample and routed in sweeping lines. Monitoring of quick gas release variations by quantification of elementary release during a short period of time. Detection of a large range of atomic masses (e.g. H{sub 2}, HT, He, CO, CO{sub 2}, Ne, Ar, Kr, Xe), together with a performing separation of isotopes for Xe and Kr elements. Coupling measurement of stable and radioactive gas isotopes, by using in parallel mass spectrometry and gamma spectrometry techniques. To fulfill these challenging needs, a common strategy for analysis equipment implementation has been set up thanks to a recently launched collaboration between the CEA and the Univ. of Provence, with the technological support of the Liverpool Univ.. It aims at developing a chronological series of mass spectrometer devices based upon mass filter and 2D/3D ion traps with Fourier transform operating mode and having increasing levels of performances to match the previous challenges for out-of pile and in-pile experiments. The final objective is to install a high performance online mass spectrometer coupled to a gamma spectrometer in the fission product laboratory of the future Jules Horowitz Material Test Reactor. An intermediate step will consist of testing first equipment on an existing experimental facility in the LECA-STAR Hot Cell Laboratory of the CEA Cadarache. This paper presents the scientific and operational stakes linked to fission gas issues, resumes the current state of art for analyzing them in nuclear facilities, then presents the skills gathered through this collaboration to overcome technological bottlenecks. Finally it describes the implementation strategy in nuclear research facilities of the CEA Cadarache. (authors)

  12. Original article Effects of arginine, growth hormone-releasing

    E-Print Network [OSTI]

    Boyer, Edmond

    release of ARG (1 g/kg body weight, infused between times-15 and -5 min), growth hormone-releasing hormone Growth hormone (GH) secretion is regu- lated by many factors including nutrients. Arginine (ARG) infused infusions of ARG can stimulate GH secre- tion in lambs (Davenport et al, 1990a, 1995), adult sheep

  13. Connectivity to National Atmospheric Release Advisory Center (NARAC)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-08-11T23:59:59.000Z

    To establish requirements for connectivity with the National Atmospheric Release Advisory Center (NARAC) at Lawrence Livermore National Laboratory for all DOE and NNSA sites and facilities with potential for hazardous materials releases at levels that require emergency response. The requirements of this Notice have been incorporated into DOE O 151.1C, Comprehensive Emergency Management System, dated 11-2-05. No cancellations.

  14. absorption hormonal release: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    absorption hormonal release First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Original article Release of...

  15. Upflow bioreactor with septum and pressure release mechanism

    DOE Patents [OSTI]

    Hansen, Conly L.; Hansen, Carl S.; Pack, Kevin; Milligan, John; Benefiel, Bradley C.; Tolman, C. Wayne; Tolman, Kenneth W.

    2010-04-20T23:59:59.000Z

    An upflow bioreactor includes a vessel having an inlet and an outlet configured for upflow operation. A septum is positioned within the vessel and defines a lower chamber and an upper chamber. The septum includes an aperture that provides fluid communication between the upper chamber and lower chamber. The bioreactor also includes means for releasing pressure buildup in the lower chamber. In one configuration, the septum includes a releasable portion having an open position and a closed position. The releasable portion is configured to move to the open position in response to pressure buildup in the lower chamber. In the open position fluid communication between the lower chamber and the upper chamber is increased. Alternatively the lower chamber can include a pressure release line that is selectively actuated by pressure buildup. The pressure release mechanism can prevent the bioreactor from plugging and/or prevent catastrophic damage to the bioreactor caused by high pressures.

  16. Experimental Mathematics and Computational Statistics

    SciTech Connect (OSTI)

    Bailey, David H.; Borwein, Jonathan M.

    2009-04-30T23:59:59.000Z

    The field of statistics has long been noted for techniques to detect patterns and regularities in numerical data. In this article we explore connections between statistics and the emerging field of 'experimental mathematics'. These includes both applications of experimental mathematics in statistics, as well as statistical methods applied to computational mathematics.

  17. Comparison of fission product release predictions using PARFUME with results from the AGR-1 safety tests

    SciTech Connect (OSTI)

    Blaise Collin

    2014-09-01T23:59:59.000Z

    Safety tests were conducted on fourteen fuel compacts from AGR-1, the first irradiation experiment of the Advanced Gas Reactor (AGR) Fuel Development and Qualification program, at temperatures ranging from 1600 to 1800°C to determine fission product release at temperatures that bound reactor accident conditions. The PARFUME (PARticle FUel ModEl) code was used to predict the release of fission products silver, cesium, strontium, and krypton from fuel compacts containing tristructural isotropic (TRISO) coated particles during the safety tests, and the predicted values were compared with experimental results. Preliminary comparisons between PARFUME predictions and post-irradiation examination (PIE) results of the safety tests show different trends in the prediction of the fractional release depending on the species, and it leads to different conclusions regarding the diffusivities used in the modeling of fission product transport in TRISO-coated particles: • For silver, the diffusivity in silicon carbide (SiC) might be over-estimated by a factor of at least 102 to 103 at 1600°C and 1700°C, and at least 10 to 102 at 1800°C. The diffusivity of silver in uranium oxy-carbide (UCO) might also be over-estimated, but the available data are insufficient to allow definitive conclusions to be drawn. • For cesium, the diffusivity in UCO might be over-estimated by a factor of at least 102 to 103 at 1600°C, 105 at 1700°C, and 103 at 1800°C. The diffusivity of cesium in SiC might also over-estimated, by a factor of 10 at 1600°C and 103 at 1700°C, based upon the comparisons between calculated and measured release fractions from intact particles. There is no available estimate at 1800°C since all the compacts heated up at 1800°C contain particles with failed SiC layers whose release dominates the release from intact particles. • For strontium, the diffusivity in SiC might be over-estimated by a factor of 10 to 102 at 1600 and 1700°C, and 102 to 103 at 1800°C. These values might be somewhat over-estimated because the strontium retention during irradiation cannot be assessed a priori, which affects the magnitude of the calculated release during safety testing. The diffusivity of strontium in UCO cannot be derived from these heating tests, but it is assumed to be modeled correctly using the IAEA recommended value for kernel diffusivity. • For krypton, there is no reliable release data for compacts heated up at 1600°C, which includes all the compacts containing only intact particles. At 1700 and 1800°C, comparisons show an over-prediction of the release from compacts containing particles with failed SiC by 1 to 1.5 orders of magnitude. The available data from these heating tests do not allow to determine which of the TRISO-coating’s layers diffusivities are under or over-estimated.

  18. High volume fuel vapor release valve

    SciTech Connect (OSTI)

    Gimby, D.R.

    1991-09-03T23:59:59.000Z

    This patent describes a fuel vapor release valve for use in a vehicle fuel system. It comprises a valve housing 10 placed in a specific longitudinal orientation, the valve housing 10 defining an interior cavity 22 having an inlet 20 for admitting fuel vapor and an outlet 14 for discharging such fuel vapor; a valve member 24 positioned in the cavity 22 for movement between an outlet 14 opening position and an outlet 14 closing position, the valve member 24 including a cap member 34 having a seat surface 36 for mating with the outlet 14 and an orifice 42 extending through the cap member 34 providing a passageway from the outlet 14 to the cavity 22, the orifice 42 extending through the cap member 34 providing a passageway from the outlet 14 to the cavity 22, the orifice 42 having a lesser radius than the outlet 14; the valve member 24 further including a plug member 30 engaged with the cap member 34 for movement between an orifice 42 opening position and an orifice 42 closing position; and, a valve housing tilt responsive means for moving the valve member 24 to an outlet 14 and orifice 42 closing position in response to tilting of the valve 10 about its longitudinal axis whereby, upon the return of the valve 10 to its specified longitudinal orientation, the plug member 30 first moves to an orifice 42 opening position and the cap member 34 subsequently moves to an outlet 14 opening position.

  19. Building Technologies Experimental Capabilities and Apparatus...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Experimental Capabilities and Apparatus Directory October 01, 2014 ORNL Building Technologies Research and Integration Center (BTRIC) provides unique experimental capabilities...

  20. AUTHORIZATION FOR RELEASE OF HEALTH INFORMATION Use this form for release of medical information. Information pertaining to Counseling, Psychiatry, Social Services, and Drug and

    E-Print Network [OSTI]

    Kammen, Daniel M.

    . Information pertaining to Counseling, Psychiatry, Social Services, and Drug and Alcohol Counseling is released

  1. Toxic chemical considerations for tank farm releases. Revision 1

    SciTech Connect (OSTI)

    Van Keuren, J.C.

    1995-11-01T23:59:59.000Z

    This document provides a method of determining the toxicological consequences of accidental releases from Hanford Tank Farms. A determination was made of the most restrictive toxic chemicals that are expected to be present in the tanks. Concentrations were estimated based on the maximum sample data for each analyte in all the tanks in the composite. Composite evaluated were liquids and solids from single shell tanks, double shell tanks, flammable gas watch list tanks, as well as all solids, all liquids, head space gases, and 241-C-106 solids. A sum of fractions of the health effects was computed for each composite for unit releases based emergency response planning guidelines (ERPGs). Where ERPGs were not available for chemical compounds of interest, surrogate guidelines were established. The calculation method in this report can be applied to actual release scenarios by multiplying the sum of fractions by the release rate for continuous releases, or the release amount for puff releases. Risk guidelines are met if the product is less than for equal to one.

  2. RELAP-7 Beta Release: Summary of Capabilities

    SciTech Connect (OSTI)

    Richard C. Martineau; Hongbin Zhang; Haihua Zhao

    2014-12-01T23:59:59.000Z

    RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory (INL). Building upon the decades of software development at the INL, we began the development of RELAP-7 in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway. As part of this development, the first lines of RELAP-7 code were committed to the software revision control repository on November 7th, 2011. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. RELAP-7 is built using the INL’s modern scientific software development framework, MOOSE (Multi-physics Object Oriented Simulation Environment). MOOSE provides improved numerical calculations (including higher-order integration in both space and time, yielding converged second-order accuracy). The RELAP-7 code structure is based on multiple physical component models such as pipes, junctions, pumps, etc. Each component can have options for different fluid models such as single- and two-phase flow. This component-based and physics-based software architecture allows RELAP-7 to adopt different physical models for different applications. A relatively new two-phase hydrodynamic model, termed the “7-Equation model” for two phasic pressures, velocities, energies, and volumetric fraction, is incorporated into RELAP-7 for liquid-gas (water-steam) flows. This new model allows second-order integration because it is well-posed, which will reduce the numerical error associated with traditional systems analysis codes. In this paper, we provide a RELAP-7 capability list describing analysis features, range of applicability, and reactor components that will be available for the December 15th, 2014 beta release of the software.

  3. Independent analysis of selected core-concrete interaction and fission product release experiments with CORCON-MOD2 and VANESA

    SciTech Connect (OSTI)

    Greene, G.A.; Sanborn, Y.

    1986-01-01T23:59:59.000Z

    The discrepancies between experimental findings and the Reactor Safety Study predictions, as well as the rapidly developing data base enabling phenomenological modeling of core-concrete interactions and ex-vessel fission product release, have prompted the development of several new computer models of core-concrete interactions and fission product release during severe accidents. Two such models are the CORCON-MOD2 model of core-concrete interactions and the VANESA model of ex-vessel aerosol and fission product release during core-concrete interactions. The final judge on the adequacy of the development of models of core debris-concrete interactions is, of course, comparison of the model predictions with the results of experiments. The research into ex-vessel core debris behavior differs from research into many aspects of reactor accidents in that there are many experimental results for comparison. Comparisons of code predictions with results of tests using realistic temperatures and conditions should provide an indication of the progress that has been made and, with appropriately chosen tests, an indication of work that needs to be done. 9 refs., 6 figs., 5 tabs.

  4. Carbon dioxide release from ocean thermal energy conversion (OTEC) cycles

    SciTech Connect (OSTI)

    Green, H.J. (Solar Energy Research Inst., Golden, CO (USA)); Guenther, P.R. (Scripps Institution of Oceanography, La Jolla, CA (USA))

    1990-09-01T23:59:59.000Z

    This paper presents the results of recent measurements of CO{sub 2} release from an open-cycle ocean thermal energy conversion (OTEC) experiment. Based on these data, the rate of short-term CO{sub 2} release from future open-cycle OTEC plants is projected to be 15 to 25 times smaller than that from fossil-fueled electric power plants. OTEC system that incorporate subsurface mixed discharge are expected to result in no long-term release. OTEC plants can significantly reduce CO{sub 2} emissions when substituted for fossil-fueled power generation. 12 refs., 4 figs., 3 tabs.

  5. Relocation impacts of a major release from SRTC

    SciTech Connect (OSTI)

    Blanchard, A.; Thompson, E.A.; Thompson, J.M.

    1999-06-01T23:59:59.000Z

    The relocation impacts of an accidental release, scenario 1-RD-3 , are evaluated for the Savannah River Technology Center. The extent of the area potentially contaminated to a level that would result in doses exceeding the relocation protective action guide(PAG)is calculated. The maximum calculated distance downwind from the accident at which the relocation PAG is exceeded is also determined. The consequences of the particulate portion of the release are evaluated using the HOTSPOT model and an EXCEL spreadsheet. The consequences of the tritium release are evaluated using UFOTRI.

  6. Experimental techniques and measurement accuracies

    SciTech Connect (OSTI)

    Bennett, E.F.; Yule, T.J.; DiIorio, G.; Nakamura, T.; Maekawa, H.

    1985-02-01T23:59:59.000Z

    A brief description of the experimental tools available for fusion neutronics experiments is given. Attention is paid to error estimates mainly for the measurement of tritium breeding ratio in simulated blankets using various techniques.

  7. Impact of nitrate-enhanced leachate recirculation on gaseous releases from a landfill bioreactor cell

    SciTech Connect (OSTI)

    Tallec, G.; Bureau, C. [Cemagref, UR HBAN, Parc de Tourvoie, BP44, F-92163 Antony (France); Peu, P.; Benoist, J.C. [Cemagref, UR GERE, 17 Avenue de Cucille, CS 64427, F-35044 Rennes (France); Lemunier, M. [Suez-Environnement, CIRADE, 38 Av. Jean Jaures, 78440 Gargenville (France); Budka, A.; Presse, D. [SITA France, 132 Rue des 3 Fontanot, 92000 Nanterre Cedex (France); Bouchez, T. [Cemagref, UR HBAN, Parc de Tourvoie, BP44, F-92163 Antony (France)], E-mail: theodore.bouchez@cemagref.fr

    2009-07-15T23:59:59.000Z

    This study evaluates the impact of nitrate injection on a full scale landfill bioreactor through the monitoring of gaseous releases and particularly N{sub 2}O emissions. During several weeks, we monitored gas concentrations in the landfill gas collection system as well as surface gas releases with a series of seven static chambers. These devices were directly connected to a gas chromatograph coupled to a flame ionisation detector and an electron capture detector (GC-FID/ECD) placed directly on the field. Measurements were performed before, during and after recirculation of raw leachate and nitrate-enhanced leachate. Raw leachate recirculation did not have a significant effect on the biogas concentrations (CO{sub 2}, CH{sub 4} and N{sub 2}O) in the gas extraction network. However, nitrate-enhanced leachate recirculation induced a marked increase of the N{sub 2}O concentrations in the gas collected from the recirculation trench (100-fold increase from 0.2 ppm to 23 ppm). In the common gas collection system however, this N{sub 2}O increase was no more detectable because of dilution by gas coming from other cells or ambient air intrusion. Surface releases through the temporary cover were characterized by a large spatial and temporal variability. One automated chamber gave limited standard errors over each experimental period for N{sub 2}O releases: 8.1 {+-} 0.16 mg m{sup -2} d{sup -1} (n = 384), 4.2 {+-} 0.14 mg m{sup -2} d{sup -1} (n = 132) and 1.9 {+-} 0.10 mg m{sup -2} d{sup -1} (n = 49), during, after raw leachate and nitrate-enhanced leachate recirculation, respectively. No clear correlation between N{sub 2}O gaseous surface releases and recirculation events were evidenced. Estimated N{sub 2}O fluxes remained in the lower range of what is reported in the literature for landfill covers, even after nitrate injection.

  8. Experimental Hall A | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A This photo shows one of the two High

  9. Experimental Hall B | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A This photo shows one of the two

  10. Experimental Hall C | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A This photo shows one of the

  11. Experimental Hall D | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A This photo shows one of theHall D

  12. Shape memory polymer (SMP) gripper with a release sensing system

    DOE Patents [OSTI]

    Maitland, Duncan J. (Pleasant Hill, CA); Lee, Abraham P. (Walnut Creek, CA); Schumann, Daniel L. (Concord, CA); Silva, Luiz Da (Danville, CA)

    2000-01-01T23:59:59.000Z

    A system for releasing a target material, such as an embolic coil from an SMP located at the end of a catheter utilizing an optical arrangement for releasing the material. The system includes a laser, laser driver, display panel, photodetector, fiber optics coupler, fiber optics and connectors, a catheter, and an SMP-based gripper, and includes a release sensing and feedback arrangement. The SMP-based gripper is heated via laser light through an optic fiber causing the gripper to release a target material (e.g., embolic coil for therapeutic treatment of aneurysms). Various embodiments are provided for coupling the laser light into the SMP, which includes specific positioning of the coils, removal of the fiber cladding adjacent the coil, a metal coating on the SMP, doping the SMP with a gradient absorbing dye, tapering the fiber optic end, coating the SMP with low refractive index material, and locating an insert between the fiber optic and the coil.

  13. Recommended 236U Evaluation for the next ENDL Release

    SciTech Connect (OSTI)

    Brown, D A; Summers, N; Thompson, I

    2007-10-03T23:59:59.000Z

    We present a review of {sup 236}U evaluations and data. We recommend adopting the ENDF/B-VII.0 {sup 236}U evaluation for the next release of the ENDL database.

  14. Microsoft Word - xx xx 13 Midway pole replacement news release...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    07 13 BONNEVILLE POWER ADMINISTRATION FOR IMMEDIATE RELEASE Tuesday, Feb. 12, 2013 CONTACT: Mike Hansen, 503-230-4328 or 503-230-5131 BPA to hold public meeting on proposed rebuild...

  15. ETD Release Policies in American ARL Institutions: A Preliminary Study

    E-Print Network [OSTI]

    Surratt, Brian E.

    2005-09-27T23:59:59.000Z

    The advent of electronic theses and dissertations (ETDs) has improved access to graduate level research, but with these new opportunities come new challenges. Institutions that host ETD collections must develop release policies that meet...

  16. Energy Department Releases New Guidance for Strengthening Cybersecurit...

    Broader source: Energy.gov (indexed) [DOE]

    News Media Contact (202) 586-4940 WASHINGTON - As part of the Obama Administration's commitment to a strong and secure power grid, the Energy Department today released new guidance...

  17. Final Strategic Plan Released by Gulf Coast Ecosystem Restoration Taskforce

    Broader source: Energy.gov [DOE]

    Today (December 5) the Gulf Coast Ecosystem Restoration Task Force released its final strategy for long-term restoration in the Gulf, a path forward based on input from states, tribes, federal...

  18. Iodine-131 releases from the Hanford Site, 1944--1947

    SciTech Connect (OSTI)

    Heeb, C.M.

    1993-03-01T23:59:59.000Z

    Detailed results of the Hanford Environmental Dose Reconstruction project (HEDR) iodine-131 release reconstruction are presented in this volume. Included are daily data on B, D, and F Plant, reactor operations from the P-Department Daily Reports (General Electric Company 1947). Tables of B and T Plant material processed from the three principal sources on separations plant operations: The Jaech report (Jaech undated), the 200 Area Report (Acken and Bird 1945; Bird and Donihee 1945), and the Metal History Reports (General Electric Company 1946). A transcription of the Jaech report is also provided because it is computer-generated and is not readily readable in its original format. The iodine-131 release data are from the STRM model. Cut-by-cut release estimates are provided, along with daily, monthly, and yearly summations. These summations are based on the hourly release estimates. The hourly data are contained in a 28 megabyte electronic file. Interested individuals may request a copy.

  19. The Release of Trapped Gases from Amorphous Solid Water Films...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I. Top-Down" Crystallization-Induced Crack Propagation Probed The Release of Trapped Gases from Amorphous Solid Water Films: I. Top-Down" Crystallization-Induced Crack Propagation...

  20. DOE Street Lighting Consortium Releases Results of Public Street...

    Broader source: Energy.gov (indexed) [DOE]

    Solid-State Street Lighting Consortium (MSSLC) has released the results of a voluntary web-based inventory survey of public street and area lighting across the U.S., conducted...

  1. DOE Releases Filing Instructions for Federal Risk Insurance for...

    Broader source: Energy.gov (indexed) [DOE]

    Outlines Five Steps for New Nuclear Plant Sponsors to Enter Into a Conditional Agreement for Risk Insurance WASHINGTON, DC - The U.S. Department of Energy (DOE) today released...

  2. Transient fission gas release during direct electrical heating experiments

    SciTech Connect (OSTI)

    Fenske, G.R.; Emerson, J.E.; Savoie, F.E.

    1983-12-01T23:59:59.000Z

    The gas release behavior of irradiated EBR-II fuel was observed to be dependent on several factors: the presence of cladding, the retained gas content, and the energy absorbed. Fuel that retained in excess of 16 to 17 ..mu..moles/g of fission gas underwent spallation as the cladding melted and released 22 to 45% of its retained gas, while fuel with retained gas levels below approx. 15 to 16 ..mu..moles/g released less than approx. 9% of its gas as the cladding melted. During subsequent direct electrical heating ramps, fuel that did not spall released an additional quantity of gas (up to 4 ..mu..moles/g), depending on the energy absorbed.

  3. Toxic Chemical Release Inventory reporting ``Qs & As``. Environmental Guidance

    SciTech Connect (OSTI)

    Not Available

    1994-03-01T23:59:59.000Z

    This document offers guidance on toxic chemical release inventory reporting, pursuant to Section 313 of the Emergency Planning and Community Right-to-Know Act (EPCRA) at DOE sites.

  4. Release of DRAFT RFP Headquarters Reading Room Instructions/Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Release of DRAFT RFP Headquarters Reading Room InstructionsGuidelines 1. Reading Room Points of Contact: 721 - 88, Mike Baehre, (202) 586-6575 89 - Close of Draft RFP, John...

  5. Dopamine Release and Uptake in Animal Models of Neurological Diseases

    E-Print Network [OSTI]

    Fulks, Jenny Lynn

    Fast scan cyclic voltammetry (FSCV) can be utilized to detect neurotransmitter release and uptake in brain slices. When combining this technique with disease state animals models, information for therapeutic targets can ...

  6. Multimonth controlled small molecule release from biodegradable thin films

    E-Print Network [OSTI]

    Hammond, Paula T.

    Long-term, localized delivery of small molecules from a biodegradable thin film is challenging owing to their low molecular weight and poor charge density. Accomplishing highly extended controlled release can facilitate ...

  7. CONSENT TO RELEASE EDUCATIONAL RECORDS I, _________________________________, Social Security Number _______________,

    E-Print Network [OSTI]

    Qiu, Weigang

    ) ____ Transcript ____ Student Information Management System (SIMS) records ____ Bursar's Receipt ____ AcademicCONSENT TO RELEASE EDUCATIONAL RECORDS I, _________________________________, Social Security Number records protected under the Family Educational Rights and Privacy Act (FERPA) as follows: 1. Records

  8. ASCEM Project Achieves Major Milestone with Initial User Release

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. – The Advanced Simulation Capability for Environmental Management (ASCEM) Project has reached a major milestone at record pace with the release of the research and development branch of the ASCEM toolset.

  9. Microsoft Word - Draft science bowl registration news releaseSES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    www.bpa.gov PR 33 13 BONNEVILLE POWER ADMINISTRATION FOR IMMEDIATE RELEASE Tuesday, October 1, 2013 CONTACT: Kevin Wingert, 503-230-4140503-230-5131 BPA Regional Science Bowl...

  10. Polyelectrolyte multilayers for tunable release of antibiotics and other therapeutics

    E-Print Network [OSTI]

    Chuang, Helen F

    2008-01-01T23:59:59.000Z

    Polyelectrolyte multilayers (PEMs) were fabricated via the layer-by-layer (LbL) deposition process, incorporating hydrolytically degradable poly([beta]-amino esters) to result in biodegradable PEMs that can release active ...

  11. Mechanisms of metal release from contaminated coastal sediments

    E-Print Network [OSTI]

    Kalnejais, Linda H

    2005-01-01T23:59:59.000Z

    The fate of trace metals in contaminated coastal sediments is poorly understood, yet critical for effective coastal management. The aim of this thesis is to investigate and quantify the mechanisms leading to the release ...

  12. NREL Releases RFP for Distributed Wind Turbine Competitiveness Improvement Projects

    Broader source: Energy.gov [DOE]

    In support of DOE's efforts to further develop distributed wind technology, NREL's National Wind Technology Center has released a Request for Proposal for the following Distributed Wind Turbine Competitiveness Improvement Projects on the Federal Business

  13. Bioresponsive Mesoporous Silica Nanoparticles for Triggered Drug Release

    E-Print Network [OSTI]

    Singh, Neetu

    Mesoporous silica nanoparticles (MSNPs) have garnered a great deal of attention as potential carriers for therapeutic payloads. However, achieving triggered drug release from MSNPs in vivo has been challenging. Here, we ...

  14. SBIR/STTR Phase I Release 1 Award Winners Announced, Includes...

    Office of Environmental Management (EM)

    Release 1 Award Winners Announced, Includes Four Hydrogen and Fuel Cell Projects SBIRSTTR Phase I Release 1 Award Winners Announced, Includes Four Hydrogen and Fuel Cell Projects...

  15. A congestion mechanism for uphill expressways, Part I: the shoulder lane "release valve"

    E-Print Network [OSTI]

    Patire, Anthony D.; Cassidy, Michael J.

    2010-01-01T23:59:59.000Z

    shoulder lane “release valve” Anthony D. Patire and Michaelshoulder lane “release valve” Anthony D. Patire and Michaelacting as a “ re- lease valve” for the excess accumulation

  16. Massachusetts Oil and Hazardous Material Release Prevention and Response Act, State Superfund Law (Massachusetts)

    Broader source: Energy.gov [DOE]

    This Act contains information on prevention strategies for hazardous material release, permits for facilities managing hazardous waste, and response tactics and liability in the event such release...

  17. SRNL EMERGENCY RESPONSE CAPABILITY FOR ATMOSPHERIC CONTAMINANT RELEASES

    SciTech Connect (OSTI)

    Koffman, L; Chuck Hunter, C; Robert Buckley, R; Robert Addis, R

    2006-07-12T23:59:59.000Z

    Emergency response to an atmospheric release of chemical or radiological contamination is enhanced when plume predictions, field measurements, and real-time weather information are integrated into a geospatial framework. The Weather Information and Display (WIND) System at Savannah River National Laboratory (SRNL) utilizes such an integrated framework. The rapid availability of predictions from a suite of atmospheric transport models within this geospatial framework has proven to be of great value to decision makers during an emergency involving an atmospheric contaminant release.

  18. MELCOR 1.8.5 modeling aspects of fission product release, transport and deposition an assessment with recommendations.

    SciTech Connect (OSTI)

    Gauntt, Randall O.

    2010-04-01T23:59:59.000Z

    The Phebus and VERCORS data have played an important role in contemporary understanding and modeling of fission product release and transport from damaged light water reactor fuel. The data from these test programs have allowed improvement of MELCOR modeling of release and transport processes for both low enrichment uranium fuel as well as high burnup and mixed oxide (MOX) fuels. This paper discusses the synthesis of these findings in the MELCOR severe accident code. Based on recent assessments of MELCOR 1.8.5 fission product release modeling against the Phebus FPT-1 test and on observations from the ISP-46 exercise, modifications to the default MELCOR 1.8.5 release models are recommended. The assessments identified an alternative set of Booth diffusion parameters recommended by ORNL (ORNL-Booth), which produced significantly improved release predictions for cesium and other fission product groups. Some adjustments to the scaling factors in the ORNL-Booth model were made for selected fission product groups, including UO{sub 2}, Mo and Ru in order to obtain better comparisons with the FPT-1 data. The adjusted model, referred to as 'Modified ORNL-Booth,' was subsequently compared to original ORNL VI fission product release experiments and to more recently performed French VERCORS tests, and the comparisons was as favorable or better than the original CORSOR-M MELCOR default release model. These modified ORNL-Booth parameters, input to MELCOR 1.8.5 as 'sensitivity coefficients' (i.e. user input that over-rides the code defaults) are recommended for the interim period until improved release models can be implemented into MELCOR. For the case of ruthenium release in air-oxidizing conditions, some additional modifications to the Ru class vapor pressure are recommended based on estimates of the RuO{sub 2} vapor pressure over mildly hyperstoichiometric UO{sub 2}. The increased vapor pressure for this class significantly increases the net transport of Ru from the fuel to the gas stream. A formal model is needed. Deposition patterns in the Phebus FPT-1 circuit were also significantly improved by using the modified ORNL-Booth parameters, where retention of lower volatile Cs{sub 2}MoO{sub 4} is now predicted in the heated exit regions of the FPT-1 test, bringing down depositions in the FPT-1 steam generator tube to be in closer alignment with the experimental data. This improvement in 'RCS' deposition behavior preserves the overall correct release of cesium to the containment that was observed even with the default CORSOR-M model. Not correctly treated however is the release and transport of Ag to the FPT-1 containment. A model for Ag release from control rods is presently not available in MELCOR. Lack of this model is thought to be responsible for the underprediction by a factor of two of the total aerosol mass to the FPT-1 containment. It is suggested that this underprediction of airborne mass led to an underprediction of the aerosol agglomeration rate. Underprediction of the agglomeration rate leads to low predictions of the aerosol particle size in comparison to experimentally measured ones. Small particle size leads low predictions of the gravitational settling rate relative to the experimental data. This error, however, is a conservative one in that too-low settling rate would result in a larger source term to the environment. Implementation of an interim Ag release model is currently under study. In the course of this assessment, a review of MELCOR release models was performed and led to the identification of several areas for future improvements to MELCOR. These include upgrading the Booth release model to account for changes in local oxidizing/reducing conditions and including a fuel oxidation model to accommodate effects of fuel stoichiometry. Models such as implemented in the French ELSA code and described by Lewis are considered appropriate for MELCOR. A model for ruthenium release under air oxidizing conditions is also needed and should be included as part of a fuel oxidation model since fuel stoichiometry is a fundamen

  19. Savannah River Site radioiodine atmospheric releases and offsite maximum doses

    SciTech Connect (OSTI)

    Marter, W.L.

    1990-11-01T23:59:59.000Z

    Radioisotopes of iodine have been released to the atmosphere from the Savannah River Site since 1955. The releases, mostly from the 200-F and 200-H Chemical Separations areas, consist of the isotopes, I-129 and 1-131. Small amounts of 1-131 and 1-133 have also been released from reactor facilities and the Savannah River Laboratory. This reference memorandum was issued to summarize our current knowledge of releases of radioiodines and resultant maximum offsite doses. This memorandum supplements the reference memorandum by providing more detailed supporting technical information. Doses reported in this memorandum from consumption of the milk containing the highest I-131 concentration following the 1961 1-131 release incident are about 1% higher than reported in the reference memorandum. This is the result of using unrounded 1-131 concentrations of I-131 in milk in this memo. It is emphasized here that this technical report does not constitute a dose reconstruction in the same sense as the dose reconstruction effort currently underway at Hanford. This report uses existing published data for radioiodine releases and existing transport and dosimetry models.

  20. Pre-release plastic packaging of MEMS and IMEMS devices

    DOE Patents [OSTI]

    Peterson, Kenneth A. (Albuquerque, NM); Conley, William R. (Tijeras, NM)

    2002-01-01T23:59:59.000Z

    A method is disclosed for pre-release plastic packaging of MEMS and IMEMS devices. The method can include encapsulating the MEMS device in a transfer molded plastic package. Next, a perforation can be made in the package to provide access to the MEMS elements. The non-ablative material removal process can include wet etching, dry etching, mechanical machining, water jet cutting, and ultrasonic machining, or any combination thereof. Finally, the MEMS elements can be released by using either a wet etching or dry plasma etching process. The MEMS elements can be protected with a parylene protective coating. After releasing the MEMS elements, an anti-stiction coating can be applied. The perforating step can be applied to both sides of the device or package. A cover lid can be attached to the face of the package after releasing any MEMS elements. The cover lid can include a window for providing optical access. The method can be applied to any plastic packaged microelectronic device that requires access to the environment, including chemical, pressure, or temperature-sensitive microsensors; CCD chips, photocells, laser diodes, VCSEL's, and UV-EPROMS. The present method places the high-risk packaging steps ahead of the release of the fragile portions of the device. It also provides protection for the die in shipment between the molding house and the house that will release the MEMS elements and subsequently treat the surfaces.

  1. Release rates from partitioning and transmutation waste packages

    SciTech Connect (OSTI)

    Lee, W.W.L. (Lawrence Berkeley Lab., CA (United States)); Choi, Jor-Shan (Lawrence Livermore National Lab., CA (United States))

    1991-12-01T23:59:59.000Z

    Partitioning the actinides in light-water reactor spent fuel and transmuting them in actinide-burning liquid-metal reactors has been proposed as a potential method for reducing the public risks from geologic disposal of nuclear waste. As a first step towards quantifying the benefits for waste disposal of actinide burning, we have calculated the release rates of key radionuclides from waste packages resulting from actinide burning, and compare them with release rates from LWR spent fuel destined for disposal at the potential repository at Yucca Mountain. The wet-drip water-contact mode has been used. Analytic methods and parameter values are very similar to those used for assessing Yucca Mountain as a potential repository. Once released, the transport characteristics of radionuclides will be largely determined by site geology. For the most important nuclides such as I-129 and {Tc}-99, which are undiminished by actinide-burning reactors, it is not surprising that actinide burning offers little reduction in releases. For important actinides such as Np-237 and Pu isotopes, which are reduced in inventory, the releases are not reduced because the release rates are proportional to solubility, rather than inventory.

  2. The UKIRT Infrared Deep Sky Survey Early Data Release

    E-Print Network [OSTI]

    Dye, S; Almaini, O; Cross, N J G; Edge, A C; Hambly, N C; Hirst, P; Hodgkin, S T; Irwin, M J; Jameson, R F; Lawrence, A; Warren, S J

    2006-01-01T23:59:59.000Z

    This paper defines the UKIRT Infrared Deep Sky Survey (UKIDSS) Early Data Release (EDR). UKIDSS is a set of five large near-infra-red surveys defined by Lawrence et al. (2006), being undertaken with the UK Infra-red Telescope (UKIRT) Wide Field Camera (WFCAM). The programme began in May 2005 and has an expected duration of seven years. Each survey uses some or all of the broadband filter complement ZYJHK. The EDR is the first public release of data to the European Southern Observatory (ESO) community. All worldwide releases occur after a delay of 18 months from the ESO release. The EDR provides a small sample dataset, ~60 sq.deg (about 1% of the whole of UKIDSS), that is a lower limit to the expected quality of future survey data releases. In addition, an EDR+ dataset contains all EDR data plus extra data of similar quality, but for areas not observed in all of the required filters (amounting to ~220 sq.deg). The first large data release, DR1, will occur in mid-2006. We provide details of the observational im...

  3. Experimental

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-l 1,Energy Consumers | DepartmentProfile:

  4. Models for environmental impact assessments of releases of radioactive substances from CERN facilities

    E-Print Network [OSTI]

    Vojtyla, P

    2005-01-01T23:59:59.000Z

    The document describes generic models for environmental impact assessments of releases of radioactive substances from CERN facilities. Except for few models developed in the Safety Commission, the models are based on the 1997 Swiss directive HSK-R-41 and on the 2001 IAEA Safety Report No. 19. The writing style is descriptive, facilitating the practical implementation of the models at CERN. There are four scenarios assumed for airborne releases: (1) short-term releases for release limit calculations, (2) actual short-term releases, (3) short-term releases during incidents/accidents, and (4) chronic long-term releases during the normal operation of a facility. For water releases, two scenarios are considered: (1) a release into a river, and (2) a release into a water treatment plant. The document shall be understood as a reference for specific environmental studies involving radioactive releases and as a recommendation of the Safety Commission.

  5. Models for Assessment of the environmental impact of Radioactive releases from CERN facilities

    E-Print Network [OSTI]

    Vojtyla, P

    2002-01-01T23:59:59.000Z

    The document describes generic models for environmental impact assessment of radioactive releases from CERN facilities. Except for few models developed in the TIS Division, the models are based on the 1997 Swiss directive HSK-R-41 and on the 2001 IAEA Safety Report No. 19. The writing style is descriptive, facilitating the practical implementation of the models at CERN. There are four scenarios assumed for airborne releases: (1) short-term releases for release limit calcu¬lations, (2) actual short-term releases, (3) short-term releases during incidents/accidents, and (4) chronic long-term releases during the normal operation of a facility. For water releases, two scenarios are considered: (1) a release into a river, and (2) a release into a water treatment plant. The document shall be understood as a reference for specific environmental studies involving radioactive releases and as a recommendation of the TIS Division.

  6. Engine Combustion Network Experimental Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Maintained by the Engine Combustion Department of Sandia National Laboratories, data currently available on the website includes reacting and non-reacting sprays in a constant-volume chamber at conditions typical of diesel combustion. The data are useful for model development and validation because of the well-defined boundary conditions and the wide range of conditions employed. A search utility displays data based on experimental conditions such as ambient temperature, ambient density, injection pressure, nozzle size, fuel, etc. Experiment-related visualizations are also available. The search utility for experimental data is located at http://public.ca.sandia.gov/ecn/cvdata/frameset.html (Specialized Interface)

  7. Effects of multi-component diffusion and heat release on laminar diffusion flame liftoff

    SciTech Connect (OSTI)

    Li, Zhiliang; Chen, Ruey-Hung [Department of Mechanical, Materials and Aerospace Engineering, University of Central Florida, Orlando, FL 32816-2450 (United States); Phuoc, Tran X. [National Energy Technology Laboratory, Department of Energy, P.O. Box 10940, MS 84-340, Pittsburgh, PA 15261 (United States)

    2010-08-15T23:59:59.000Z

    Numerical simulations were conducted of the liftoff and stabilization phenomena of laminar jet diffusion flames of inert-diluted C{sub 3}H{sub 8} and CH{sub 4} fuels. Both non-reacting and reacting jets were investigated, including multi-component diffusivities and heat release effects (buoyancy and gas expansion). The role of Schmidt number for non-reacting jets was investigated, with no conclusive Schmidt number criterion for liftoff previously arrived at in similarity solutions. The cold-flow simulation for He-diluted CH{sub 4} fuel does not predict flame liftoff; however, adding heat release reaction lead to the prediction of liftoff, which is consistent with experimental observations. Including reaction was also found to improve liftoff height prediction for C{sub 3}H{sub 8} flames, with the flame base location differing from that in the similarity solution - the intersection of the stoichiometric and iso-velocity (equal to 1-D flame speed) is not necessary for flame stabilization (and thus liftoff). Possible mechanisms other than that proposed for similarity solution may better help to explain the stabilization and liftoff phenomena. (author)

  8. Modeling the influence of bubble pressure on grain boundary separation and fission gas release

    SciTech Connect (OSTI)

    Pritam Chakraborty; Michael R. Tonks; Giovanni Pastore

    2014-09-01T23:59:59.000Z

    Grain boundary (GB) separation as a mechanism for fission gas release (FGR), complementary to gas bubble interlinkage, has been experimentally observed in irradiated light water reactor fuel. However there has been limited effort to develop physics-based models incorporating this mechanism for the analysis of FGR. In this work, a computational study is carried out to investigate GB separation in UO2 fuel under the effect of gas bubble pressure and hydrostatic stress. A non-dimensional stress intensity factor formula is obtained through 2D axisymmetric analyses considering lenticular bubbles and Mode-I crack growth. The obtained functional form can be used in higher length-scale models to estimate the contribution of GB separation to FGR.

  9. Aerosol release and transport program. Quarterly progress report, October-December 1981. [LMFBR; PWR; BWR

    SciTech Connect (OSTI)

    Adams, R. E.; Tobias, M. L.

    1982-05-01T23:59:59.000Z

    This report summarizes progress for the Aerosol Release and Transport Program sponsored by the Nuclear Regulatory Commission's Office of Nuclear Regulatory Research, Division of Accident Evaluation, for the period October-December 1981. Topics discussed include (1) under-sodium tests in the Fuel Aerosol Simulant Test (FAST) Facility, (2) U/sub 3/O/sub 8/ and Fe/sub 2/O/sub 3/ in steam (light-water reactor accident) aerosol experiments in the Nuclear Safety Pilot Plant, (3) generation and characterization of cadmium and CdO aerosols in the basic aerosol experimental program, (4) core-melt tests of Zircaloy-clad fuel capsules, (5) initial results of a piston-model bubble oscillation code allowing liquid bypass, and (6) calculations with the UVABUBL code to compare with underwater and under-sodium period measurements in FAST experiments.

  10. CFN Ops Plan | Experimental Safety Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Experimental Safety Committee The CFN Experimental Safety Committee will consist of the members listed below. Additional SME's from the lab support divisions will be added as...

  11. Experimental Neutrino Physics: Final Report

    SciTech Connect (OSTI)

    Lane, Charles E.; Maricic, Jelena

    2012-09-05T23:59:59.000Z

    Experimental studies of neutrino properties, with particular emphasis on neutrino oscillation, mass and mixing parameters. This research was pursued by means of underground detectors for reactor anti-neutrinos, measuring the flux and energy spectra of the neutrinos. More recent investigations have been aimed and developing detector technologies for a long-baseline neutrino experiment (LBNE) using a neutrino beam from Fermilab.

  12. Big Explosives Experimental Facility - BEEF

    ScienceCinema (OSTI)

    None

    2015-01-07T23:59:59.000Z

    The Big Explosives Experimental Facility or BEEF is a ten acre fenced high explosive testing facility that provides data to support stockpile stewardship and other national security programs. At BEEF conventional high explosives experiments are safely conducted providing sophisticated diagnostics such as high speed optics and x-ray radiography.

  13. STEVENS' HANDBOOK OF EXPERIMENTAL PSYCHOLOGY

    E-Print Network [OSTI]

    Sekuler, Robert

    STEVENS' HANDBOOK OF EXPERIMENTAL PSYCHOLOGY THIRD EDITION Volume 1: Sensation and Perception in- vented the vertebrate eye, and hold the patents on most of the features of the human model the video from the Internet, go to http://www.cis.ohio-state.edu/jwdavis/Archive/blurmotion.mpg or http://www.cis.ohio

  14. Big Explosives Experimental Facility - BEEF

    SciTech Connect (OSTI)

    None

    2014-10-31T23:59:59.000Z

    The Big Explosives Experimental Facility or BEEF is a ten acre fenced high explosive testing facility that provides data to support stockpile stewardship and other national security programs. At BEEF conventional high explosives experiments are safely conducted providing sophisticated diagnostics such as high speed optics and x-ray radiography.

  15. Nuclear Physics A 772 (2006) 113–137 Total prompt energy release in the neutron-induced

    E-Print Network [OSTI]

    D. G. Madland

    2006-01-01T23:59:59.000Z

    This study addresses, for the first time, the total prompt energy release and its components for the fission of 235U, 238U, and 239Pu as a function of the kinetic energy of the neutron inducing the fission. The components are extracted from experimental measurements, where they exist, together with model-dependent calculation, interpolation, and extrapolation. While the components display clear dependencies upon the incident neutron energy, their sums display only weak, yet definite, energy dependencies. Also addressed is the total prompt energy deposition in fission for the same three systems. Results are presented in equation form. New measurements are recommended as a consequence of this study.

  16. Combined x-ray scattering, radiography, and velocity interferometry/streaked optical pyrometry measurements of warm dense carbon using a novel technique of shock-and-release

    SciTech Connect (OSTI)

    Falk, K.; Collins, L. A.; Kagan, G.; Kress, J. D.; Montgomery, D. S.; Srinivasan, B. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)] [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Gamboa, E. J. [University of Michigan, Ann Arbor, Michigan 48109 (United States) [University of Michigan, Ann Arbor, Michigan 48109 (United States); SLAC National Accelerator Laboratory, 2575 Sand Hill Road, MS 72, Menlo Park, California 94025 (United States); Tzeferacos, P. [Flash Center for Computational Science, University of Chicago, Chicago, Illinois 60637 (United States)] [Flash Center for Computational Science, University of Chicago, Chicago, Illinois 60637 (United States); Benage, J. F. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States) [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States)

    2014-05-15T23:59:59.000Z

    This work focused on a new application of the shock-and-release technique for equation of state (EOS) measurements. Warm dense matter states at near normal solid density and at temperatures close to 10?eV in diamond and graphite samples were created using a deep release from a laser-driven shock at the OMEGA laser facility. Independent temperature, density, and pressure measurements that do not depend on any theoretical models or simulations were obtained using imaging x-ray Thomson scattering, radiography, velocity interferometry, and streaked optical pyrometry. The experimental results were reproduced by the 2-D FLASH radiation hydrodynamics simulations finding a good agreement. The final EOS measurement was then compared with widely used SESAME EOS models as well as quantum molecular dynamics simulation results for carbon, which were very consistent with the experimental data.

  17. ISOPAR L RELEASE FROM SALTSTONE CURED AT 55 C

    SciTech Connect (OSTI)

    Cozzi, A; Cora Berry, C; Michael Bronikowski, M; Russell Eibling, R; Jack Zamecnik, J

    2006-05-16T23:59:59.000Z

    The decontaminated salt solution waste stream from the Modular Caustic Side Solvent Extraction Unit and the Salt Waste Processing Facility is anticipated to contain entrained extraction solvent. The decontaminated salt solution is scheduled to be processed through Tank 50 into the Saltstone Production Facility. This study, among others, has been undertaken because the solvent concentration in the decontaminated salt solution may cause flammability issues within the Saltstone Disposal Facility that may need to be addressed prior to operation. Previous work at the Savannah River National Laboratory determined the release of Isopar{reg_sign} L from saltstone prepared with a simulated DSS with Isopar{reg_sign} L concentrations ranging from 50 to 200 {micro}g/g in the salt fraction and with test temperatures ranging from ambient to 95 C. The results from the curing of the saltstone showed that the Isopar{reg_sign} L release data can be treated as a percentage of initial concentration in the concentration range studied. The majority of the Isopar{reg_sign} L that was released over the test duration was released in the first few days. The release of Isopar{reg_sign} L begins immediately and the rate of release decreases over time. At higher temperatures the immediate release is larger than at lower temperatures. In this study, saltstone was prepared using a simulated decontaminated salt solution containing Isopar{reg_sign} L concentrations of 50 {micro}L/L (30 {micro}g/g) and 100 {micro}L/L (61 {micro}g/g) and cured at 55 C. The headspace of each sample was purged and the Isopar{reg_sign} L was trapped on a coconut shell carbon tube. The amount of Isopar{reg_sign} L captured was determined using NIOSH Method 1501. The percentage of Isopar{reg_sign} L released after 20 days was 1.4 - 3.7% for saltstone containing 50 {micro}L/L concentration and 2.1 - 4.3% for saltstone containing 100 {micro}L/L concentration. Given the measurement uncertainties in this work there is no clearly discernible relationship between percentage release and initial Isopar{reg_sign} L concentration.

  18. Bulk-scaffolded hydrogen storage and releasing materials and methods for preparing and using same

    DOE Patents [OSTI]

    Autrey, S Thomas [West Richland, WA; Karkamkar, Abhijeet J [Richland, WA; Gutowska, Anna [Richland, WA; Li, Liyu [Richland, WA; Li, Xiaohong S [Richland, WA; Shin, Yongsoon [Richland, WA

    2011-06-21T23:59:59.000Z

    Compositions are disclosed for storing and releasing hydrogen and methods for preparing and using same. These hydrogen storage and releasing materials exhibit fast release rates at low release temperatures without unwanted side reactions, thus preserving desired levels of purity and enabling applications in combustion and fuel cell applications.

  19. Doxorubicin and b-Lapachone Release and Interaction with Micellar Core Materials

    E-Print Network [OSTI]

    Gao, Jinming

    as nanoscopic drug carriers. The release of two different drugs, doxorubicin (DOX) and b- lapachone (b core at lower pH. In contrast, the release rate of DOX was found to noticeably increase at lower p of different factors on drug release are the reports by Kataoka et al. on the pH dependence of DOX release from

  20. Release mitigation spray safety systems for chemical demilitarization applications.

    SciTech Connect (OSTI)

    Leonard, Jonathan; Tezak, Matthew Stephen; Brockmann, John E.; Servantes, Brandon; Sanchez, Andres L.; Tucker, Mark David; Allen, Ashley N.; Wilson, Mollye C.; Lucero, Daniel A.; Betty, Rita G.

    2010-06-01T23:59:59.000Z

    Sandia National Laboratories has conducted proof-of-concept experiments demonstrating effective knockdown and neutralization of aerosolized CBW simulants using charged DF-200 decontaminant sprays. DF-200 is an aqueous decontaminant, developed by Sandia National Laboratories, and procured and fielded by the US Military. Of significance is the potential application of this fundamental technology to numerous applications including mitigation and neutralization of releases arising during chemical demilitarization operations. A release mitigation spray safety system will remove airborne contaminants from an accidental release during operations, to protect personnel and limit contamination. Sandia National Laboratories recently (November, 2008) secured funding from the US Army's Program Manager for Non-Stockpile Chemical Materials Agency (PMNSCMA) to investigate use of mitigation spray systems for chemical demilitarization applications. For non-stockpile processes, mitigation spray systems co-located with the current Explosive Destruction System (EDS) will provide security both as an operational protective measure and in the event of an accidental release. Additionally, 'tented' mitigation spray systems for native or foreign remediation and recovery operations will contain accidental releases arising from removal of underground, unstable CBW munitions. A mitigation spray system for highly controlled stockpile operations will provide defense from accidental spills or leaks during routine procedures.

  1. Heat release analysis of oxygen-enriched diesel combustion

    SciTech Connect (OSTI)

    Assanis, D.; Karvounis, E. (Univ. of Illinois, Urbana, IL (United States)); Sekar, R.; Marr, W. (Argonne National Lab., IL (United States))

    1993-10-01T23:59:59.000Z

    A heat release correlation for oxygen-enriched diesel combustion is being developed through heat release analysis of cylinder pressure data from a single-cylinder diesel engine operating under various levels of oxygen enrichment. Results show that standard combustion correlations available in the literature do not accurately describe oxygen-enriched diesel combustion. A novel functional form is therefore proposed, which is shown to reproduce measured heat release profiles closely, under different operating conditions and levels of oxygen enrichment. The mathematical complexity of the associated curve-fitting problem is maintained at the same level of difficulty as for standard correlations. When the novel correlation is incorporated into a computer simulation of diesel engine operation with oxygen enrichment, the latter predicts pressure traces in excellent agreement with measured pressure data. This demonstrates the potential of the proposed combustion simulation to guide the application of oxygen-enriched technology successfully to a variety of multicylinder diesel systems.

  2. THE RADIAL VELOCITY EXPERIMENT (RAVE): FOURTH DATA RELEASE

    SciTech Connect (OSTI)

    Kordopatis, G.; Gilmore, G. [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge, CB3 0HA (United Kingdom); Steinmetz, M.; Williams, M. E. K.; Piffl, T.; Enke, H.; Carrillo, I. [Leibniz-Institut für Astrophysik Potsdam, An der Sternwarte 16, D-14482 Potsdam (Germany); Boeche, C.; Roeser, S. [Astronomisches Rechen-Institut, Zentrum für Astronomie der Universität Heidelberg, Mönchhofstr. 12-14, D-69120 Heidelberg (Germany); Seabroke, G. M. [Mullard Space Science Laboratory, University College London, Holmbury St. Mary, Dorking, Surrey, RH5 6NT (United Kingdom); Siebert, A. [Observatoire Astronomique de Strasbourg, Université de Strasbourg, CNRS, UMR 7550, 11 rue de l'Université, F-67000 Strasbourg (France); Zwitter, T. [Faculty of Mathematics and Physics, University of Ljubljana, Jadranska 19, 1000 Ljubljana (Slovenia); Binney, J. [Rudolf Peierls Centre for Theoretical Physics, Keble Road, Oxford, OX1 3NP (United Kingdom); De Laverny, P.; Recio-Blanco, A.; Bijaoui, A. [Laboratoire Lagrange, UMR 7293, Université de Nice Sophia Antipolis, CNRS, Observatoire de la Côte d'Azur, BP4229, F-06304 Nice (France); Wyse, R. F. G. [Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218 (United States); Freeman, K. [Research School of Astronomy and Astrophysics, Australian National University, Cotter Road, Weston, ACT 2611 (Australia); Munari, U. [INAF National Institute of Astrophysics, Astronomical Institute of Padova, I-36012 Asiago (VI) (Italy); Anguiano, B., E-mail: gkordo@ast.cam.ac.uk [Australian Astronomical Observatory, P.O. Box 915, North Ryde, NSW 1670 (Australia); and others

    2013-11-01T23:59:59.000Z

    We present the stellar atmospheric parameters (effective temperature, surface gravity, overall metallicity), radial velocities, individual abundances, and distances determined for 425,561 stars, which constitute the fourth public data release of the RAdial Velocity Experiment (RAVE). The stellar atmospheric parameters are computed using a new pipeline, based on the algorithms of MATISSE and DEGAS. The spectral degeneracies and the Two Micron All Sky Survey photometric information are now better taken into consideration, improving the parameter determination compared to the previous RAVE data releases. The individual abundances for six elements (magnesium, aluminum, silicon, titanium, iron, and nickel) are also given, based on a special-purpose pipeline that is also improved compared to that available for the RAVE DR3 and Chemical DR1 data releases. Together with photometric information and proper motions, these data can be retrieved from the RAVE collaboration Web site and the Vizier database.

  3. National Atmospheric Release Advisory Center (NARAC) Capabilities for Homeland Security

    SciTech Connect (OSTI)

    Sugiyama, G; Nasstrom, J; Baskett, R; Simpson, M

    2010-03-08T23:59:59.000Z

    The Department of Energy's National Atmospheric Release Advisory Center (NARAC) provides critical information during hazardous airborne releases as part of an integrated national preparedness and response strategy. Located at Lawrence Livermore National Laboratory, NARAC provides 24/7 tools and expert services to map the spread of hazardous material accidentally or intentionally released into the atmosphere. NARAC graphical products show affected areas and populations, potential casualties, and health effect or protective action guideline levels. LLNL experts produce quality-assured analyses based on field data to assist decision makers and responders. NARAC staff and collaborators conduct research and development into new science, tools, capabilities, and technologies in strategically important areas related to airborne transport and fate modeling and emergency response. This paper provides a brief overview of some of NARAC's activities, capabilities, and research and development.

  4. Association of intracellular calcium oscillations with release of gonadotropin-releasing hormone (GnRH) from GT1-1 neuronal cells

    E-Print Network [OSTI]

    Gilmore, Chrystal Dawn

    1999-01-01T23:59:59.000Z

    the relationship of GnRH release with [Ca²?][] oscillations using the GT1-1 neuronal cell line. GnRH release was measured by radioimmunoassay of media incubated with GT1-1 neuronal cells for 1 hr with control or test substances to induce release of GnRH. [Ca...

  5. Method and apparatus for controlling accidental releases of tritium

    DOE Patents [OSTI]

    Galloway, Terry R. [Berkeley, CA

    1980-04-01T23:59:59.000Z

    An improvement in a tritium control system based on a catalytic oxidation reactor wherein accidental releases of tritium into room air are controlled by flooding the catalytic oxidation reactor with hydrogen when the tritium concentration in the room air exceeds a specified limit. The sudden flooding with hydrogen heats the catalyst to a high temperature within seconds, thereby greatly increasing the catalytic oxidation rate of tritium to tritiated water vapor. Thus, the catalyst is heated only when needed. In addition to the heating effect, the hydrogen flow also swamps the tritium and further reduces the tritium release.

  6. Microfabrication of freestanding metal structures released from graphite substrates.

    SciTech Connect (OSTI)

    Makarova, O. V.; Tang, C.-M.; Mancini, D. C.; Moldovan, N.; Divan, R.; Ryding, D. G.; Lee, R. H.

    2002-02-22T23:59:59.000Z

    A sacrificial layer is usually used to release electroformed microstructures. Because of the chemistry applied to the sacrificial layer, only a limited number of metals can be used for electroforming. A novel method to fabricate freestanding electroformed copper structures is presented. A graphite substrate allows the release of the metal part, by abrasive removal of the graphite after electroforming. Results on fabrication of high-aspect-ratio freestanding copper grids are presented; these can be used as x-ray collimator in medical imaging to reduce scattered radiation. This process has potential application to the fabrication of injection molds and microparts on pick-and-place carriers for microelectromechanical systems (MEMS).

  7. Methodology for performing measurements to release material from radiological control

    SciTech Connect (OSTI)

    Durham, J.S. [Pacific Northwest Lab., Richland, WA (United States); Gardner, D.L. [Westinghouse Hanford Co., Richland, WA (United States)

    1993-09-01T23:59:59.000Z

    This report describes the existing and proposed methodologies for performing measurements of contamination prior to releasing material for uncontrolled use at the Hanford Site. The technical basis for the proposed methodology, a modification to the existing contamination survey protocol, is also described. The modified methodology, which includes a large-area swipe followed by a statistical survey, can be used to survey material that is unlikely to be contaminated for release to controlled and uncontrolled areas. The material evaluation procedure that is used to determine the likelihood of contamination is also described.

  8. Method and apparatus for controlling accidental releases of tritium

    DOE Patents [OSTI]

    Galloway, T.R.

    1980-04-01T23:59:59.000Z

    An improvement is described in a tritium control system based on a catalytic oxidation reactor wherein accidental releases of tritium into room air are controlled by flooding the catalytic oxidation reactor with hydrogen when the tritium concentration in the room air exceeds a specified limit. The sudden flooding with hydrogen heats the catalyst to a high temperature within seconds, thereby greatly increasing the catalytic oxidation rate of tritium to tritiated water vapor. Thus, the catalyst is heated only when needed. In addition to the heating effect, the hydrogen flow also swamps the tritium and further reduces the tritium release. 1 fig.

  9. Experimental data confronts nuclear structure

    SciTech Connect (OSTI)

    Garrett, J.D.

    1988-01-01T23:59:59.000Z

    The physical content of experimental data for a variety of excitation energies and angular momenta is summarized. The specific nuclear structure questions which these data address are considered. The specific regions discussed are: low-spin data near the particle separation thresholds; low-spin data at intermediate excitation energies; high-spin, near-yrast data and high-spin data at larger excitation energies. 63 refs., 14 figs., 1 tab.

  10. Small-Scale Spray Releases: Initial Aerosol Test Results

    SciTech Connect (OSTI)

    Mahoney, Lenna A.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, Garrett N.; Kurath, Dean E.; Buchmiller, William C.; Smith, Dennese M.; Blanchard, Jeremy; Song, Chen; Daniel, Richard C.; Wells, Beric E.; Tran, Diana N.; Burns, Carolyn A.

    2012-11-01T23:59:59.000Z

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents was assessed with most of the simulants. Orifices included round holes and rectangular slots. The round holes ranged in size from 0.2 to 4.46 mm. The slots ranged from (width × length) 0.3 × 5 to 2.74 × 76.2 mm. Most slots were oriented longitudinally along the pipe, but some were oriented circumferentially. In addition, a limited number of multi-hole test pieces were tested in an attempt to assess the impact of a more complex breach. Much of the testing was conducted at pressures of 200 and 380 psi, but some tests were conducted at 100 psi. Testing the largest postulated breaches was deemed impractical because of the large size of some of the WTP equipment. This report presents the experimental results and analyses for the aerosol measurements obtained in the small-scale test stand. It includes a description of the simulants used and their properties, equipment and operations, data analysis methodologies, and test results. The results of tests investigating the role of slurry particles in plugging small breaches are reported in Mahoney et al. (2012). The results of the aerosol measurements in the large-scale test stand are reported in Schonewill et al. (2012) along with an analysis of the combined results from both test scales.

  11. Small-Scale Spray Releases: Orifice Plugging Test Results

    SciTech Connect (OSTI)

    Mahoney, Lenna A.; Gauglitz, Phillip A.; Blanchard, Jeremy; Kimura, Marcia L.; Kurath, Dean E.

    2012-09-01T23:59:59.000Z

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities, is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations published in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials present in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty introduced by extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches in which the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are largely absent. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine the aerosol release fractions and aerosol generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents (AFA) was assessed with most of the simulants. Orifices included round holes and rectangular slots. Much of the testing was conducted at pressures of 200 and 380 psi, but some tests were conducted at 100 psi. Testing the largest postulated breaches was deemed impractical because of the large size of some of the WTP equipment. The purpose of the study described in this report is to provide experimental data for the first key technical area, potential plugging of small breaches, by performing small-scale tests with a range of orifice sizes and orientations representative of the WTP conditions. The simulants used were chosen to represent the range of process stream properties in the WTP. Testing conducted after the plugging tests in the small- and large-scale test stands addresses the second key technical area, aerosol generation. The results of the small-scale aerosol generation tests are included in Mahoney et al. 2012. The area of spray generation from large breaches is covered by large-scale testing in Schonewill et al. 2012.

  12. Small-Scale Spray Releases: Initial Aerosol Test Results

    SciTech Connect (OSTI)

    Mahoney, Lenna A.; Gauglitz, Phillip A.; Kimura, Marcia L.; Brown, Garrett N.; Kurath, Dean E.; Buchmiller, William C.; Smith, Dennese M.; Blanchard, Jeremy; Song, Chen; Daniel, Richard C.; Wells, Beric E.; Tran, Diana N.; Burns, Carolyn A.

    2013-05-29T23:59:59.000Z

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and net generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of antifoam agents was assessed with most of the simulants. Orifices included round holes and rectangular slots. For the combination of both test stands, the round holes ranged in size from 0.2 to 4.46 mm. The slots ranged from (width × length) 0.3 × 5 to 2.74 × 76.2 mm. Most slots were oriented longitudinally along the pipe, but some were oriented circumferentially. In addition, a limited number of multi-hole test pieces were tested in an attempt to assess the impact of a more complex breach. Much of the testing was conducted at pressures of 200 and 380 psi, but some tests were conducted at 100 psi. Testing the largest postulated breaches was deemed impractical because of the much larger flow rates and equipment that would be required. This report presents the experimental results and analyses for the aerosol measurements obtained in the small-scale test stand. It includes a description of the simulants used and their properties, equipment and operations, data analysis methodologies, and test results. The results of tests investigating the role of slurry particles in plugging small breaches are reported in Mahoney et al. (2012). The results of the aerosol measurements in the large-scale test stand are reported in Schonewill et al. (2012) along with an analysis of the combined results from both test scales.

  13. Large-Scale Spray Releases: Initial Aerosol Test Results

    SciTech Connect (OSTI)

    Schonewill, Philip P.; Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.; Kurath, Dean E.; Adkins, Harold E.; Billing, Justin M.; Burns, Carolyn A.; Davis, James M.; Enderlin, Carl W.; Fischer, Christopher M.; Jenks, Jeromy WJ; Lukins, Craig D.; MacFarlan, Paul J.; Shutthanandan, Janani I.; Smith, Dennese M.

    2012-12-01T23:59:59.000Z

    One of the events postulated in the hazard analysis at the Waste Treatment and Immobilization Plant (WTP) and other U.S. Department of Energy (DOE) nuclear facilities is a breach in process piping that produces aerosols with droplet sizes in the respirable range. The current approach for predicting the size and concentration of aerosols produced in a spray leak involves extrapolating from correlations reported in the literature. These correlations are based on results obtained from small engineered spray nozzles using pure liquids with Newtonian fluid behavior. The narrow ranges of physical properties on which the correlations are based do not cover the wide range of slurries and viscous materials that will be processed in the WTP and across processing facilities in the DOE complex. Two key technical areas were identified where testing results were needed to improve the technical basis by reducing the uncertainty due to extrapolating existing literature results. The first technical need was to quantify the role of slurry particles in small breaches where the slurry particles may plug and result in substantially reduced, or even negligible, respirable fraction formed by high-pressure sprays. The second technical need was to determine the aerosol droplet size distribution and volume from prototypic breaches and fluids, specifically including sprays from larger breaches with slurries where data from the literature are scarce. To address these technical areas, small- and large-scale test stands were constructed and operated with simulants to determine aerosol release fractions and generation rates from a range of breach sizes and geometries. The properties of the simulants represented the range of properties expected in the WTP process streams and included water, sodium salt solutions, slurries containing boehmite or gibbsite, and a hazardous chemical simulant. The effect of anti-foam agents was assessed with most of the simulants. Orifices included round holes and rectangular slots. The round holes ranged in size from 0.2 to 4.46 mm. The slots ranged from (width × length) 0.3 × 5 to 2.74 × 76.2 mm. Most slots were oriented longitudinally along the pipe, but some were oriented circumferentially. In addition, a limited number of multi-hole test pieces were tested in an attempt to assess the impact of a more complex breach. Much of the testing was conducted at pressures of 200 and 380 psi, but some tests were conducted at 100 psi. Testing the largest postulated breaches was deemed impractical because of the large size of some of the WTP equipment. The purpose of this report is to present the experimental results and analyses for the aerosol measurements obtained in the large-scale test stand. The report includes a description of the simulants used and their properties, equipment and operations, data analysis methodology, and test results. The results of tests investigating the role of slurry particles in plugging of small breaches are reported in Mahoney et al. 2012a. The results of the aerosol measurements in the small-scale test stand are reported in Mahoney et al. (2012b).

  14. For Immediate release: 11/16/12 Contact: Ingrid Wright

    E-Print Network [OSTI]

    Ward, Karen

    Mobil, Lockheed Martin, General Motors, AT&T and more. Internship presenters will be Alan Alvillar UTEPFor Immediate release: 11/16/12 Contact: Ingrid Wright Engineering students host Internship Seminar Series The College of Engineering Tau Beta Pi, Malone Engineering Leadership Program, the Entering

  15. For Immediate release: 10/31/12 Contact: Ingrid Wright

    E-Print Network [OSTI]

    Ward, Karen

    Mobil, Lockheed Martin, General Motors, AT&T and more. Internship presenters will be Janet Gomez UTEPFor Immediate release: 10/31/12 Contact: Ingrid Wright Engineering students host Internship Seminar Series The College of Engineering Tau Beta Pi, Malone Engineering Leadership Program, the Entering

  16. For Immediate release: 10/25/12 Contact: Ingrid Wright

    E-Print Network [OSTI]

    Ward, Karen

    Mobil, Lockheed Martin, General Motors, AT&T and more. On October 26, there will be a special guestFor Immediate release: 10/25/12 Contact: Ingrid Wright Engineering students host Internship Seminar Series The College of Engineering Tau Beta Pi, Malone Engineering Leadership Program, the Entering

  17. For Immediate release: 10/05/11 Contact: Ingrid Wright

    E-Print Network [OSTI]

    Ward, Karen

    For Immediate release: 10/05/11 Contact: Ingrid Wright UTEP to Oversee Push for 'Green' Engineers develop new alternative energy sources and ways to increase energy efficiency. Heidi A. Taboada, Ph of the BuildinG a Regional Energy and Educational Network (BGREEN) project. The USDA announced the award Tuesday

  18. Release Data Package for the 2004 Composite Analysis

    SciTech Connect (OSTI)

    Riley, Robert G.; Lopresti, Charles A.

    2004-08-02T23:59:59.000Z

    This data package contains all the key parameter data necessary for implementation of the Release Module to conduct the 2004 Composite Analysis. A composite analysis is required by DOE Order 435.1 to ensure public safety through the management of active and planned low-level radioactive waste disposal facilities associated with Hanford.

  19. Radiological Release Accident Investigation Report (Phase II Report)

    Broader source: Energy.gov [DOE]

    In its Phase II Report, the Accident Investigation Board concludes that the Feb. 14, 2014 radiological release at the Waste Isolation Pilot Plant was caused by an exothermic reaction involving the mixture of organic materials and nitrate salts in one drum that was processed at the Los Alamos National Laboratory in December 2013.

  20. Variable ventilation induces endogenous surfactant release in normal guinea pigs

    E-Print Network [OSTI]

    Lutchen, Kenneth

    Variable ventilation induces endogenous surfactant release in normal guinea pigs Stephen P. Arold,1. Alencar, Kenneth R. Lutchen, and Edward P. Ingenito. Variable ventilation induces endogenous surfactant.00036.2003.--Variable or noisy ventilation, which includes random breath-to-breath variations in tidal

  1. Media contact: FOR IMMEDIATE RELEASE Diana Hanford May 4, 2012

    E-Print Network [OSTI]

    Fernandez, Eduardo

    companies working in conjunction with the FAU College of Engineering and Computer Science, the FAU Charles EMedia contact: FOR IMMEDIATE RELEASE Diana Hanford May 4, 2012 Ambit Advertising and Public working on industry projects. Also included is a dedicated office for the annual FAU Business Plan

  2. Media contact: FOR IMMEDIATE RELEASE Diana Hanford September 24, 2012

    E-Print Network [OSTI]

    Belogay, Eugene A.

    to 22 technology companies working in conjunction with the FAU College of Engineering and ComputerMedia contact: FOR IMMEDIATE RELEASE Diana Hanford September 24, 2012 Ambit Advertising and Public by FAU student-based teams working on industry projects. It also serves as a knowledge resource center

  3. For immediate release Columbia University School of the Arts

    E-Print Network [OSTI]

    Qian, Ning

    For immediate release Columbia University School of the Arts Presents the Inaugural Sound Arts MFA First-Year Show New York, NY, April 28, 2014--Columbia University School of the Arts presents its sound innovation at Columbia University. The interdepartmental program was developed by Faculty from

  4. Distribution Statement A: Approved for public release; distribution is unlimited.

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    : Approved for public release; distribution is unlimited. AHPCRC, The Army High Performance Computing for the warfighter. High performance computing (HPC) provides significant advantages in designing and characterizing theories and best practices of simulation-based engineering sciences and high performance computing

  5. A Model for Delimited Information Release Andrei Sabelfeld 1

    E-Print Network [OSTI]

    Myers, Andrew C.

    A Model for Delimited Information Release Andrei Sabelfeld 1 and Andrew C. Myers2 1 Department. On the other side of the spectrum are type systems designed to accom- modate some information leakage. However a computing system, it is important to control how information flows so that sensitive information

  6. CONTAMINATION BY METALLIC ELEMENTS RELEASED FROM JOINT PROSTHESES

    E-Print Network [OSTI]

    Boyer, Edmond

    atom. A high energy given by a spark under argon with a 15-30 kV voltage volatilises a few quantity spectrometry. The principle of this technique consists in exciting an atom. When this atom returns #12;4 to the fundamental state, it releases energy as luminous radiation where the wave number characterises the respected

  7. Passive ice freezing-releasing heat pipe. [Patent application

    DOE Patents [OSTI]

    Gorski, A.J.; Schertz, W.W.

    1980-09-29T23:59:59.000Z

    A heat pipe device has been developed which permits completely passive ice formation and periodic release of ice without requiring the ambient temperature to rise above the melting point of water. This passive design enables the maximum amount of cooling capacity to be stored in the tank.

  8. 10 Year Transmission Plan for the Western Electricity Interconnection Released

    Broader source: Energy.gov [DOE]

    The Western Electricity Coordinating Council (WECC) announced the release of its first 10-Year Regional Transmission Plan (Plan) for the Western Interconnection. The Office of Electricity Delivery and Energy Reliability awarded WECC a $14.5 million grant under the American Recovery and Reinvestment Act to expand on its transmission planning activities.

  9. SPECIAL ISSUE A shallow subsurface controlled release facility in Bozeman,

    E-Print Network [OSTI]

    Geological carbon sequestration Á Controlled release of carbon dioxide Á Transport models Á Near surface for geo- logical carbon storage. The field site was characterized before injection, and CO2 transport change is the capture and storage of carbon in geologic formations. Technologies for assuring

  10. Approved Test Procedures Version 1.1 Release Notes

    E-Print Network [OSTI]

    Approved Test Procedures Version 1.1 Release Notes 1 Change Reason for Change 302.a drugdrug, drug allergy In the Informative Test Description section Added clarification to the example. 302.c Problem List In the Informative Test Description section Added the sentence "The test also

  11. A Model for Delimited Information Release Andrei Sabelfeld 1

    E-Print Network [OSTI]

    Sabelfeld, Andrei

    Abstract. Much work on security-typed languages lacks a satisfactory account of intentional information, many intuitively secure programs do allow some release, or declassification, of secret information (e security, confidentiality, information flow, nonin- terference, security-type systems, security policies

  12. Release of Arsenic to the Environment from CCA-Treated

    E-Print Network [OSTI]

    Florida, University of

    Release of Arsenic to the Environment from CCA-Treated Wood. 2. Leaching and Speciation during International University, Miami, Florida 33199 Wood treated with chromated copper arsenate (CCA) is primarily of arsenic leaching from landfills containing CCA-treated wood. In control lysimeters where untreated wood

  13. Release of Arsenic to the Environment from CCA-Treated

    E-Print Network [OSTI]

    Florida, University of

    Release of Arsenic to the Environment from CCA-Treated Wood. 1. Leaching and Speciation during from in-service chromated copper arsenate (CCA)-treated products and the overall impact to soils and groundwater. To address this issue, two decks were constructed, one from CCA-treated wood and the other from

  14. ORIGINAL ARTICLE Microbial-mediated release of bisphenol A from

    E-Print Network [OSTI]

    Falkinham, Joseph

    ORIGINAL ARTICLE Microbial-mediated release of bisphenol A from polycarbonate vessels N.H. Oberlies Keywords bisphenol A, Escherichia coli, polycarbonate flasks, predator bacteria. Correspondence Joseph O. strain grown in polycarbonate flasks. Methods and Results: Although a culture of an antibiotic

  15. For Immediate release: 06/14/12 Contact: Ingrid Wright

    E-Print Network [OSTI]

    Ward, Karen

    bays that will obtain a minimum Leadership in Engineering and Environmental Design (LEED) SilverFor Immediate release: 06/14/12 Contact: Ingrid Wright Civil Engineering Collaborates with City to Build New Fire Station The Civil Engineering Department at The University of Texas at El Paso has been

  16. Kinetic study of bitumen release from heated shale

    SciTech Connect (OSTI)

    Butler, E.B.; Barker, C.

    1986-10-01T23:59:59.000Z

    With rising temperature shales evolve hydrocarbons discontinuously. At low temperatures, bitumens are thermally distilled (Peak 1) while at higher temperatures kerogen is pyrolyzed to lower molecular weight products (Peak 2). Hydrocarbon release occurring between these two peaks is less well understood. They have studied the kinetics of thermal bitumen release (Peak 1) from samples of the Excello and Woodford Shales and find that they are second order with activation energies of 19,000 cals/mole and 17,048 cals/ mole, respectively. The thermal release of nC/sub 26/ adsorbed on a siliceous support also followed second order kinetics. Activation energies, along with the determined Arrhenius A factor, permits the calculation of Peak 1 shape so that its contribution can be subtracted from the total hydrocarbon release. The residual curve shows two smaller peaks between the bitumen and kerogen peaks. These are tentatively assigned to adsorption on the mineral matrix and adsorption on kerogen. An important consequence of second order kinetics is that the temperature for the Peak 1 maximum varies with the amount of bitumen in the rock.

  17. Science Service B a t u s Released upon receipt

    E-Print Network [OSTI]

    Science Service B a t u s Released upon receipt but intendod f o r use May 19, 1933 1 PVHYTKF had seen brown quadrupsd with a hump on its a cnmel. Every known optical phencinenon of the atmosph of the Air." (All rights resumed by Science, Service, Inc.) SCIENCE SERVICE 21st and Constitution Ave

  18. For Immediate Release: June 14, 2001 MULTIDATA SYSTEMS INTERNATIONAL CORPORATION

    E-Print Network [OSTI]

    Responds to IAEA Reports on Radiological Emergency in Panama In public documents released aware of a radiological emergency in Panama. In a preliminary report issued on June 2, 2001, the IAEA reported on a radiological emergency at the National Oncology Institute of Panama. The emergency involved

  19. University of Oklahoma Norman Campus WAIVER and RELEASE of LIABILITY

    E-Print Network [OSTI]

    Oklahoma, University of

    University of Oklahoma Norman Campus WAIVER and RELEASE of LIABILITY This is a legal and binding. The University of Oklahoma is a state educational institution. References to the University of Oklahoma include: _______________________________________________ _______________________________________________ _______________________________________________ I understand that the University of Oklahoma is not an agent of and has no responsibility for any

  20. THE OHIO ACADEMY OF SCIENCE Consent and Release Agreement

    E-Print Network [OSTI]

    Piotrowski, Zbigniew

    THE OHIO ACADEMY OF SCIENCE Consent and Release Agreement Required for participation in District of The Ohio Academy of Science In consideration of the right and opportunity of the undersigned to attend of The Ohio Academy of Science, the undersigned for him/herself and for his/her heirs and legal

  1. Drug release from hydrazone-containing peptide amphiphiles

    SciTech Connect (OSTI)

    Matson, John B.; Stupp, Samuel I. (NWU)

    2012-03-15T23:59:59.000Z

    Hydrolytically-labile hydrazones in peptide amphiphiles were studied as degradable tethers for release of the drug nabumetone from nanofiber gels. On-resin addition of the novel compound tri-Boc-hydrazido adipic acid to a lysine E-amine allowed for precise placement of a hydrazide in a peptide sequence.

  2. Furman University Club Sports Program Acknowledgement and Release Form

    E-Print Network [OSTI]

    Furman University Club Sports Program Acknowledgement and Release Form I, the undersigned, acknowledge that I am at least 18 years of age and that I am voluntarily requesting permission to become. In consideration of being permitted to participate in the Activity, _____ (initial here) I acknowledge that I am

  3. MEDIA RELEASE FAIRFAX TO LAUNCH DIGITAL SUBSCRIPTIONS FOR

    E-Print Network [OSTI]

    Peters, Richard

    MEDIA RELEASE FAIRFAX TO LAUNCH DIGITAL SUBSCRIPTIONS FOR THE SYDNEY MORNING HERALD AND THE AGE for the first month - 6 June 2013: Fairfax Media today announced that digital subscriptions for The Sydney development to our digital strategy since Fairfax Media began producing digital content and products

  4. Heat release response of acoustically forced turbulent premixed flamesrole

    E-Print Network [OSTI]

    Lieuwen, Timothy C.

    Heat release response of acoustically forced turbulent premixed flames­role of kinematic surface to coherent forcing and turbulent fluctuations are coupled even at linear order in coherent forcing amplitude, ea, due to flame propagation (kinematic restoration). This coupling effectively causes

  5. SAND962331 Distribution Unlimited Release Category UC405

    E-Print Network [OSTI]

    Devine, Karen

    This manual describes the use of MPSalsa, an unstructured finite element (FE) code for solving chemically, heat transfer, mass transfer, and detailed reactions. In addition, considerable effort has been madeSAND96­2331 Distribution Unlimited Release Category UC­405 Printed September 1996 MPSalsa A FINITE

  6. accident release fractions: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    accident release fractions First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 The GALEX Arecibo SDSS...

  7. Spent Fuel Transportation Package Performance Study - Experimental Design Challenges

    SciTech Connect (OSTI)

    Snyder, A. M.; Murphy, A. J.; Sprung, J. L.; Ammerman, D. J.; Lopez, C.

    2003-02-25T23:59:59.000Z

    Numerous studies of spent nuclear fuel transportation accident risks have been performed since the late seventies that considered shipping container design and performance. Based in part on these studies, NRC has concluded that the level of protection provided by spent nuclear fuel transportation package designs under accident conditions is adequate. [1] Furthermore, actual spent nuclear fuel transport experience showcase a safety record that is exceptional and unparalleled when compared to other hazardous materials transportation shipments. There has never been a known or suspected release of the radioactive contents from an NRC-certified spent nuclear fuel cask as a result of a transportation accident. In 1999 the United States Nuclear Regulatory Commission (NRC) initiated a study, the Package Performance Study, to demonstrate the performance of spent fuel and spent fuel packages during severe transportation accidents. NRC is not studying or testing its current regulations, a s the rigorous regulatory accident conditions specified in 10 CFR Part 71 are adequate to ensure safe packaging and use. As part of this study, NRC currently plans on using detailed modeling followed by experimental testing to increase public confidence in the safety of spent nuclear fuel shipments. One of the aspects of this confirmatory research study is the commitment to solicit and consider public comment during the scoping phase and experimental design planning phase of this research.

  8. Radiological effluents released from US continental tests, 1961 through 1992. Revision 1

    SciTech Connect (OSTI)

    Schoengold, C.R.; DeMarre, M.E.; Kirkwood, E.M.

    1996-08-01T23:59:59.000Z

    This report documents all continental tests from September 15, 1961, through September 23, 1992, from which radioactive effluents were released. The report includes both updated information previously published in the publicly available May, 1990 report, DOE/NV-317, ``Radiological Effluents Released from Announced US Continental Tests 1961 through 1988``, and effluent release information on formerly unannounced tests. General information provided for each test includes the date, time, location, type of test, sponsoring laboratory and/or agency or other sponsor, depth of burial, purpose, yield or yield range, extent of release (onsite only or offsite), and category of release (detonation-time versus post-test operations). Where a test with simultaneous detonations is listed, location, depth of burial and yield information are given for each detonation if applicable, as well as the specific source of the release. A summary of each release incident by type of release is included. For a detonation-time release, the effluent curies are expressed at R+12 hours. For a controlled releases from tunnel-tests, the effluent curies are expressed at both time of release and at R+12 hours. All other types are listed at the time of the release. In addition, a qualitative statement of the isotopes in the effluent is included for detonation-time and controlled releases and a quantitative listing is included for all other types. Offsite release information includes the cloud direction, the maximum activity detected in the air offsite, the maximum gamma exposure rate detected offsite, the maximum iodine level detected offsite, and the maximum distance radiation was detected offsite. A release summary incudes whatever other pertinent information is available for each release incident. This document includes effluent release information for 433 tests, some of which have simultaneous detonations. However, only 52 of these are designated as having offsite releases.

  9. Experimental test accelerator (ETA) II

    SciTech Connect (OSTI)

    Fessenden, T.J.; Atchison, W.L.; Birx, D.L.

    1981-03-06T23:59:59.000Z

    The Experimental Test Accelerator (ETA) is designed to produce a 10 kAmp electron beam at an energy of 4.5 MeV in 40 nsec pulses at an average rate of 2 pps. The accelerator also operates in bursts of 5 pulses spaced by as little as one millisec at an average rate of 5 pps. The machine is currently operating near 80% of its design values and has accumulated over 2.5 million pulses - mostly at a rate of one pps. The plasma cathode electron source, the remainder of the accelerator, and the operating characteristics of the machine are discussed.

  10. Experimental tests of paleoclassical transport

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-l 1,Energy ConsumersExperimental Test

  11. Experimental approach to neutron stars

    SciTech Connect (OSTI)

    Leifels, Yvonne [GSI Helmholtzzentrum für Schwerionenforschung, Planckstr. 1, 64291 Darmstadt (Germany)

    2014-05-09T23:59:59.000Z

    The equation of state (EOS) of nuclear matter is of fundamental importance in many areas of nuclear physics and astrophysics In the laboratory, there are different means to study the nuclearmatter equation of state and its density dependence in particular: nuclear masses, neutron skins, pygmy resonance, and nuclear structure at the drip line give access to nuclear matter properties at densities lower than and at saturation density ?0. Heavy ion reactions at energies above 0.1 AGeV are the only means to study nuclear matter at densities larger than normal nuclear matter density ?0. In the beamenergy range of 0.1 to 2A GeV nuclear matter is compressed upto three times ?0. Access to nuclear matter properties is achieved by simulating nuclear collisions by means of microscopic transport codes, or statistical or hydrodynamicalmodels. Characteristics of heavy-ion collisions are discussed, and experimental observables which allow to constrain nuclear matter properties by comparing experimental results with those of transport codes are presented. Special emphasis will be given to the density dependence of the symmetry energy which is the most relevant connection between neutron stars and heavy ion collisions.

  12. Controlled release of ibuprofen by meso–macroporous silica

    SciTech Connect (OSTI)

    Santamaría, E., E-mail: esthersantamaria@ub.edu; Maestro, A.; Porras, M.; Gutiérrez, J.M.; González, C.

    2014-02-15T23:59:59.000Z

    Structured meso–macroporous silica was successfully synthesized from an O/W emulsion using decane as a dispersed phase. Sodium silicate solution, which acts as a silica source and a poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (EO{sub 19}PO{sub 39}EO{sub 19}) denoted as P84 was used in order to stabilize the emulsion and as a mesopore template. The materials obtained were characterized through transmission electron microscopy (TEM), scanning electron microscopy (SEM), small-angle X-ray diffraction scattering (SAXS) and nitrogen adsorption–desorption isotherms. Ibuprofen (IBU) was selected as the model drug and loaded into ordered meso–macroporous materials. The effect of the materials’ properties on IBU drug loading and release was studied. The results showed that the loading of IBU increases as the macropore presence in the material is increased. The IBU adsorption process followed the Langmuir adsorption isotherm. A two-step release process, consisting of an initial fast release and then a slower release was observed. Macropores enhanced the adsorption capacity of the material; this was probably due to the fact that they allowed the drug to access internal pores. When only mesopores were present, ibuprofen was probably adsorbed on the mesopores close to the surface. Moreover, the more macropore present in the material, the slower the release behaviour observed, as the ibuprofen adsorbed in the internal pores had to diffuse along the macropore channels up to the surface of the material. The material obtained from a highly concentrated emulsion was functionalized with amino groups using two methods, the post-grafting mechanism and the co-condensation mechanism. Both routes improve IBU adsorption in the material and show good behaviour as a controlled drug delivery system. - Graphical abstract: Ibuprofen release profiles for the materials obtained from samples P84{sub m}eso (black diamonds), P84{sub 2}0% (white squares), P84{sub 5}0% (black triangles), P84{sub 7}5% (white diamonds), P84{sub 7}5% functionalized by grafting (black squares) and P84{sub 7}5% functionalized by co-condensation method (white triangles). Display Omitted - Highlights: • Ordered meso–macroporous material is used as a controlled delivery system for ibuprofen. • Incorporation of macropores in mesoporous silica improves ibuprofen adsorption. • Meso–macroporous structures provide a lower delivery than mesoporous silica. • APTES functionalization in meso–macroporous materials improves ibuprofen adsorption and delivery behaviour.

  13. Title of dissertation: EXPERIMENTAL CHARACTERIZATION OF TURBULENT

    E-Print Network [OSTI]

    Lathrop, Daniel P.

    ABSTRACT Title of dissertation: EXPERIMENTAL CHARACTERIZATION OF TURBULENT SUPERFLUID HELIUM Matthew S. Paoletti, Doctor of Philosophy, 2010 Dissertation directed by: Professor Daniel Lathrop. #12;EXPERIMENTAL CHARACTERIZATION OF TURBULENT SUPERFLUID HELIUM by Matthew S. Paoletti Dissertation

  14. Essays in experimental and development economics

    E-Print Network [OSTI]

    Healy, Andrew J

    2005-01-01T23:59:59.000Z

    This thesis is a collection of three essays on economic development and experimental economics. In Chapter 1, I present experimental evidence about how Thais treat information from domestic and foreign sources. Thai students ...

  15. Historical Doses from Tritiated Water and Tritiated Hydrogen Gas Released to the Atmosphere from Lawrence Livermore National Laboratory (LLNL). Part 5. Accidental Releases

    SciTech Connect (OSTI)

    Peterson, S

    2007-08-15T23:59:59.000Z

    Over the course of fifty-three years, LLNL had six acute releases of tritiated hydrogen gas (HT) and one acute release of tritiated water vapor (HTO) that were too large relative to the annual releases to be included as part of the annual releases from normal operations detailed in Parts 3 and 4 of the Tritium Dose Reconstruction (TDR). Sandia National Laboratories/California (SNL/CA) had one such release of HT and one of HTO. Doses to the maximally exposed individual (MEI) for these accidents have been modeled using an equation derived from the time-dependent tritium model, UFOTRI, and parameter values based on expert judgment. All of these acute releases are described in this report. Doses that could not have been exceeded from the large HT releases of 1965 and 1970 were calculated to be 43 {micro}Sv (4.3 mrem) and 120 {micro}Sv (12 mrem) to an adult, respectively. Two published sets of dose predictions for the accidental HT release in 1970 are compared with the dose predictions of this TDR. The highest predicted dose was for an acute release of HTO in 1954. For this release, the dose that could not have been exceeded was estimated to have been 2 mSv (200 mrem), although, because of the high uncertainty about the predictions, the likely dose may have been as low as 360 {micro}Sv (36 mrem) or less. The estimated maximum exposures from the accidental releases were such that no adverse health effects would be expected. Appendix A lists all accidents and large routine puff releases that have occurred at LLNL and SNL/CA between 1953 and 2005. Appendix B describes the processes unique to tritium that must be modeled after an acute release, some of the time-dependent tritium models being used today, and the results of tests of these models.

  16. Waste Form Release Data Package for the 2001 Immobilized Low-Activity Waste Performance Assessment

    SciTech Connect (OSTI)

    McGrail, B. Peter; Icenhower, Jonathan P.; Martin, Paul F.; Schaef, Herbert T.; O'Hara, Matthew J.; Rodriguez, Eugenio; Steele, Jackie L.

    2001-02-01T23:59:59.000Z

    This data package documents the experimentally derived input data on the representative waste glasses LAWABP1 and HLP-31 that will be used for simulations of the immobilized lowactivity waste disposal system with the Subsurface Transport Over Reactive Multiphases (STORM) code. The STORM code will be used to provide the near-field radionuclide release source term for a performance assessment to be issued in March of 2001. Documented in this data package are data related to 1) kinetic rate law parameters for glass dissolution, 2) alkali-H ion exchange rate, 3) chemical reaction network of secondary phases that form in accelerated weathering tests, and 4) thermodynamic equilibrium constants assigned to these secondary phases. The kinetic rate law and Na+-H+ ion exchange rate were determined from single-pass flow-through experiments. Pressurized unsaturated flow and vapor hydration experiments were used for accelerated weathering or aging of the glasses. The majority of the thermodynamic data were extracted from the thermodynamic database package shipped with the geochemical code EQ3/6. However, several secondary reaction products identified from laboratory tests with prototypical LAW glasses were not included in this database, nor are the thermodynamic data available in the open literature. One of these phases, herschelite, was determined to have a potentially significant impact on the release calculations and so a solubility product was estimated using a polymer structure model developed for zeolites. Although this data package is relatively complete, final selection of ILAW glass compositions has not been done by the waste treatment plant contractor. Consequently, revisions to this data package to address new ILAW glass formulations are to be regularly expected.

  17. Integrating Experimental Design Into Your Program

    Broader source: Energy.gov [DOE]

    This presentation, given through the DOE's Technical Assitance Program (TAP), exaplin how you can integrate experimental design into your program.

  18. Graphene Multilayers as Gates for Multi-Week Sequential Release of Proteins from Surfaces

    E-Print Network [OSTI]

    Hong, Jinkee

    The ability to control the timing and order of release of different therapeutic drugs will play a pivotal role in improving patient care and simplifying treatment regimes in the clinic. The controlled sequential release ...

  19. CAFE: User's Guide, Release 0 26 May 1995 page 18 Calibration

    E-Print Network [OSTI]

    CAFE: User's Guide, Release 0 26 May 1995 page 18 Figure 13. Calibration network schematic. p­strip readout IC #12; CAFE: User's Guide, Release 0 26 May 1995 page 17 Figure 12. Calibration network schematic

  20. Breaking news: Biological control agent for Thaumastocoris peregrinus to be released in South Africa

    E-Print Network [OSTI]

    milestone in terms of ensuring sustainable plantation forestry in South Africa was safe to release in South Africa as a biological control agent. The release strategy for C. noackae in South Africa must still be finalized. But

  1. Michigan State University (MSU) and Lake Michigan College (LMC) Reverse Transfer Agreement Transcript Release Form

    E-Print Network [OSTI]

    Michigan State University (MSU) and Lake Michigan College (LMC) Reverse Transfer Agreement Transcript Release Form Please complete, sign, and return this release form to: Michigan State University of the Registrar at Michigan State University in writing. SIGNATURE: _______________________________________ DATE

  2. Impact on the Indoor Environment of the Release and Diffusion of TVOC

    E-Print Network [OSTI]

    Cong, X.; Liu, Y.; Wang, M.

    2006-01-01T23:59:59.000Z

    The release of VOCs by architectural decorative material, furniture and indoor things for use is considered the main reason for indoor environment pollution. The polypropylene Styene-Butadiene Rubber (abbreviation SBR) is regarded as a TVOC release...

  3. Heat release by controlled continuous-time Markov jump processes

    E-Print Network [OSTI]

    Paolo Muratore-Ginanneschi; Carlos Mejía-Monasterio; Luca Peliti

    2012-12-17T23:59:59.000Z

    We derive the equations governing the protocols minimizing the heat released by a continuous-time Markov jump process on a one-dimensional countable state space during a transition between assigned initial and final probability distributions in a finite time horizon. In particular, we identify the hypotheses on the transition rates under which the optimal control strategy and the probability distribution of the Markov jump problem obey a system of differential equations of Hamilton-Bellman-Jacobi-type. As the state-space mesh tends to zero, these equations converge to those satisfied by the diffusion process minimizing the heat released in the Langevin formulation of the same problem. We also show that in full analogy with the continuum case, heat minimization is equivalent to entropy production minimization. Thus, our results may be interpreted as a refined version of the second law of thermodynamics.

  4. In-situ generation of oxygen-releasing metal peroxides

    DOE Patents [OSTI]

    Looney, Brian B. (Aiken, SC); Denham, Miles E. (Aiken, SC)

    2007-01-09T23:59:59.000Z

    A method for remediation of contaminants in soil and groundwater is disclosed. The method generates oxygen releasing solids in groundwater or soil by injecting an aqueous energetic oxidant solution containing free radicals, oxidative conditions can be created within or ahead of a contaminant plume. Some contaminants may be remediated directly by reaction with the free radicals. Additionally and more importantly, the free radicals create an oxidative condition whereby native or injected materials, especially metals, are converted to peroxides. These peroxides provide a long-term oxygen reservoir, releasing oxygen relatively slowly over time. The oxygen can enhance microbial metabolism to remediate contaminants, can react with contaminant metals either to form immobile precipitants or to mobilize other metals to permit remediation through leaching techniques. Various injection strategies for injecting the energetic oxidant solution are also disclosed.

  5. Subtask 1.16-Slow-Release Bioremediation Accelerators

    SciTech Connect (OSTI)

    Marc D. Kurz; Edwin S. Olson

    2006-07-31T23:59:59.000Z

    Low-cost methods are needed to enhance various bioremediation technologies, from natural attenuation to heavily engineered remediation of subsurface hydrocarbon contamination. Many subsurface sites have insufficient quantities of nitrogen and phosphorus, resulting in poor bioactivity and increased remediation time and costs. The addition of conventional fertilizers can improve bioactivity, but often the nutrients dissolve quickly and migrate away from the contaminant zone before being utilized by the microbes. Through this project, conducted by the Energy & Environmental Research Center, polymers were developed that slowly release nitrogen and phosphorus into the subsurface. Conceptually, these polymers are designed to adhere to soil particles in the subsurface contamination zone where they slowly degrade and release nutrients over longer periods of time compared to conventional fertilizer applications. Tests conducted during this study indicate that some of the developed polymers have excellent potential to satisfy the microbial requirements for enhanced bioremediation.

  6. FY15 Phase I Release 2 FOA Webinar

    Broader source: Energy.gov [DOE]

    Join the DOE SBIR/STTR Programs Director, Manny Oliver as he provides a 45 minute overview of: the Federal SBIR/STTR Programs, the DOE SBIR/STTR Technology Areas, and the DOE SBIR/STTR Application and Award Process as it relates to the FY15 Phase I Release 2 Funding Opportunity Announcement (FOA). The webinar will conclude with a 45 minute Q&A using your questions submitted at registration and during the webinar.

  7. INITIAL DATA RELEASE OF THE KEPLER-INT SURVEY

    SciTech Connect (OSTI)

    Greiss, S.; Steeghs, D.; Gaensicke, B. T. [Department of Physics, Astronomy and Astrophysics group, University of Warwick, CV4 7AL Coventry (United Kingdom); Martin, E. L. [INTA-CSIC Centro de Astrobiologia, Carretera de Ajalvir km 4, 28550 Torrejon de Ardoz (Spain); Groot, P. J.; Verbeek, K.; Jonker, P. G.; Scaringi, S. [Department of Astrophysics/IMAPP, Radboud University Nijmegen, P.O. Box 9010, 6500 GL Nijmegen (Netherlands); Irwin, M. J.; Gonzalez-Solares, E. [Cambridge Astronomy Survey Unit, Institute of Astronomy, University of Cambridge, Madingley Road, CB3 0HA Cambridge (United Kingdom); Greimel, R. [Institut fuer Physik, Karl-Franzen Universitaet Graz, Universitaetsplatz 5, 8010 Graz (Austria); Knigge, C. [School of Physics and Astronomy, University of Southampton, Southampton, Hampshire SO17 1BJ (United Kingdom); Ostensen, R. H. [Instituut voor Sterrenkunde, KU Leuven, Celestijnenlaan 200D, 3001 Leuven (Belgium); Drew, J. E.; Farnhill, H. [Centre for Astrophysics Research, University of Hertfordshire, College Lane, Hatfield AL10 9AB (United Kingdom); Drake, J.; Wright, N. J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Ripepi, V. [INAF-Osservatorio Astronomico di Capodimonte, via Moiariello 16, Naples I-80131 (Italy); Southworth, J. [Astrophysics Group, Keele University, Newcastle-under-Lyme ST5 5BG (United Kingdom); Still, M., E-mail: s.greiss@warwick.ac.uk [NASA Ames Research Center, M/S 244-40, Moffett Field, CA 94035 (United States); and others

    2012-07-15T23:59:59.000Z

    This paper describes the first data release of the Kepler-INT Survey (KIS) that covers a 116 deg{sup 2} region of the Cygnus and Lyra constellations. The Kepler field is the target of the most intensive search for transiting planets to date. Despite the fact that the Kepler mission provides superior time-series photometry, with an enormous impact on all areas of stellar variability, its field lacks optical photometry complete to the confusion limit of the Kepler instrument necessary for selecting various classes of targets. For this reason, we follow the observing strategy and data reduction method used in the IPHAS and UVEX galactic plane surveys in order to produce a deep optical survey of the Kepler field. This initial release concerns data taken between 2011 May and August, using the Isaac Newton Telescope on the island of La Palma. Four broadband filters were used, U, g, r, i, as well as one narrowband one, H{alpha}, reaching down to a 10{sigma} limit of {approx}20th mag in the Vega system. Observations covering {approx}50 deg{sup 2}, thus about half of the field, passed our quality control thresholds and constitute this first data release. We derive a global photometric calibration by placing the KIS magnitudes as close as possible to the Kepler Input Catalog (KIC) photometry. The initial data release catalog containing around 6 million sources from all the good photometric fields is available for download from the KIS Web site (www.astro.warwick.ac.uk/research/kis/) as well as via MAST (KIS magnitudes can be retrieved using the MAST enhanced target search page http://archive.stsci.edu/kepler/kepler{sub f}ov/search.php and also via Casjobs at MAST Web site http://mastweb.stsci.edu/kplrcasjobs/).

  8. Controlled release of molecular components of dendrimer/bioactive complexes

    DOE Patents [OSTI]

    Segalman, Daniel J. (Albuquerque, NM); Wallace, J. Shield (Albuquerque, NM)

    1998-01-01T23:59:59.000Z

    A method for releasing molecules (guest molecules) from the matrix formed by the structure of another molecule (host molecule) in a controllable manner has been invented. This method has many applications in science and industry. In addition, applications based on such molecular systems may revolutionize significant areas of medicine, in particular the treatment of cancer and of viral infection. Similar effects can also be obtained by controlled fragmentation of a source molecule, where the molecular fragments form the active principle.

  9. Modelling of contaminant release from a uranium mine tailings site

    SciTech Connect (OSTI)

    Kahnt, Rene [G.E.O.S. Freiberg Ingenieurgesellschaft mbH, P.O.Box 1162. D-09581 Freiberg (Germany); Metschies, Thomas [Wismut GmbH, Jagdschaenkenstrasse 29. D-09117 Chemnitz (Germany)

    2007-07-01T23:59:59.000Z

    Available in abstract form only. Full text of publication follows: Uranium mining and milling continuing from the early 1960's until 1990 close to the town of Seelingstaedt in Eastern Germany resulted in 4 tailings impoundments with a total tailings volume of about 105 Mio. m{sup 3}. Leakage from these tailings impoundments enters the underlying aquifers and is discharged into surface water streams. High concentration of salts, uranium and several heavy metals are released from the tailings. At present the tailings impoundments are reshaped and covered. For the identification of suitable remediation options predictions of the contaminant release for different remediation scenarios have to be made. A compartment model representing the tailings impoundments and the surrounding aquifers for the calculation of contaminant release and transport was set up using the software GOLDSIM. This compartment model describes the time dependent hydraulic conditions within the tailings and the surrounding aquifers taking into account hydraulic and geotechnical processes influencing the hydraulic properties of the tailings material. A simple geochemical approach taking into account sorption processes as well as retardation by applying a k{sub d}-approach was implemented to describe the contaminant release and transport within the hydraulic system. For uranium as the relevant contaminant the simple approach takes into account additional geochemical conditions influencing the mobility. Alternatively the model approach allows to include the results of detailed geochemical modelling of the individual tailings zones which is than used as source term for the modelling of the contaminant transport in the aquifer and to the receiving streams. (authors)

  10. Final voluntary release assessment/corrective action report

    SciTech Connect (OSTI)

    NONE

    1996-11-12T23:59:59.000Z

    The US Department of Energy, Carlsbad Area Office (DOE-CAO) has completed a voluntary release assessment sampling program at selected Solid Waste Management Units (SWMUs) at the Waste Isolation Pilot Plant (WIPP). This Voluntary Release Assessment/Corrective Action (RA/CA) report has been prepared for final submittal to the Environmental protection Agency (EPA) Region 6, Hazardous Waste Management Division and the New Mexico Environment Department (NMED) Hazardous and Radioactive Materials Bureau to describe the results of voluntary release assessment sampling and proposed corrective actions at the SWMU sites. The Voluntary RA/CA Program is intended to be the first phase in implementing the Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI) and corrective action process at the WIPP. Data generated as part of this sampling program are intended to update the RCRA Facility Assessment (RFA) for the WIPP (Assessment of Solid Waste Management Units at the Waste Isolation Pilot Plant), NMED/DOE/AIP 94/1. This Final Voluntary RA/CA Report documents the results of release assessment sampling at 11 SWMUs identified in the RFA. With this submittal, DOE formally requests a No Further Action determination for these SWMUs. Additionally, this report provides information to support DOE`s request for No Further Action at the Brinderson and Construction landfill SWMUs, and to support DOE`s request for approval of proposed corrective actions at three other SWMUs (the Badger Unit Drill Pad, the Cotton Baby Drill Pad, and the DOE-1 Drill Pad). This information is provided to document the results of the Voluntary RA/CA activities submitted to the EPA and NMED in August 1995.

  11. Controlled release of molecular components of dendrimer/bioactive complexes

    DOE Patents [OSTI]

    Segalman, D.J.; Wallace, J.S.

    1998-08-18T23:59:59.000Z

    A method for releasing molecules (guest molecules) from the matrix formed by the structure of another molecule (host molecule) in a controllable manner has been invented. This method has many applications in science and industry. In addition, applications based on such molecular systems may revolutionize significant areas of medicine, in particular the treatment of cancer and of viral infection. Similar effects can also be obtained by controlled fragmentation of a source molecule, where the molecular fragments form the active principle. 13 figs.

  12. Sandia Energy - Dakota Version 5.4 Released

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited ReleaseWelcomeLongEnergy Storage Projects

  13. Portsmouth/Paducah Project Office Press Releases | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah Project Office Press Releases Portsmouth/Paducah Project Office

  14. SANDIA REPORT SAND2014-9040 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd

  15. Carbon release from boreal peatland open water pools: Implication for the contemporary

    E-Print Network [OSTI]

    ) is produced by anaerobic peat decomposition through acetate fermentation and/or CO2 reduction and is released

  16. EARTHQUAKE CAUSED RELEASES FROM A NUCLEAR FUEL CYCLE FACILITY

    SciTech Connect (OSTI)

    Charles W. Solbrig; Chad Pope; Jason Andrus

    2014-08-01T23:59:59.000Z

    The fuel cycle facility (FCF) at the Idaho National Laboratory is a nuclear facility which must be licensed in order to operate. A safety analysis is required for a license. This paper describes the analysis of the Design Basis Accident for this facility. This analysis involves a model of the transient behavior of the FCF inert atmosphere hot cell following an earthquake initiated breach of pipes passing through the cell boundary. The hot cell is used to process spent metallic nuclear fuel. Such breaches allow the introduction of air and subsequent burning of pyrophoric metals. The model predicts the pressure, temperature, volumetric releases, cell heat transfer, metal fuel combustion, heat generation rates, radiological releases and other quantities. The results show that releases from the cell are minimal and satisfactory for safety. This analysis method should be useful in other facilities that have potential for damage from an earthquake and could eliminate the need to back fit facilities with earthquake proof boundaries or lessen the cost of new facilities.

  17. THE RAVE CATALOG OF STELLAR ELEMENTAL ABUNDANCES: FIRST DATA RELEASE

    SciTech Connect (OSTI)

    Boeche, C.; Williams, M.; De Jong, R. S.; Steinmetz, M. [Leibniz-Institut fuer Astrophysik Potsdam (AIP), D-14482 Potsdam (Germany); Siebert, A.; Bienayme, O. [Observatoire Astronomique de Strasbourg, Universite de Strasbourg, CNRS, UMR 7550, F-67000 Strasbourg (France); Fulbright, J. P.; Ruchti, G. R. [Department of Physics and Astronomy, Johns Hopkins University, Baltimore, MD 21218 (United States); Bland-Hawthorn, J. [Sydney Institute for Astronomy, School of Physics A28, University of Sydney, NSW 2006 (Australia); Campbell, R. [Department of Physics and Astronomy, Western Kentucky University, Bowling Green, KY (United States); Freeman, K. C. [Research School of Astronomy and Astrophysics, Australia National University, Weston Creek, Canberra ACT 2611 (Australia); Gibson, B. K. [Jeremiah Horrocks Institute, University of Central Lancashire, Preston PR1 2HE (United Kingdom); Gilmore, G. [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom); Grebel, E. K. [Astronomisches Rechen-Institut, Zentrum fuer Astronomie der Universitaet Heidelberg, D-69120 Heidelberg (Germany); Helmi, A. [Kapteyn Astronomical Institute, University of Groningen, 9700 AV Groningen (Netherlands); Munari, U. [INAF Osservatorio Astronomico di Padova, Asiago I-36012 (Italy); Navarro, J. F. [Department of Physics and Astronomy, University of Victoria, Victoria BC V8W 3P6 (Canada); Parker, Q. A.; Reid, W. [Department of Physics and Astronomy, Faculty of Sciences, Macquarie University, Sydney, NSW 2109 (Australia); Seabroke, G. M. [Mullard Space Science Laboratory, University College London, Holmbury, St. Mary RH5 6NT (United Kingdom); and others

    2011-12-15T23:59:59.000Z

    We present chemical elemental abundances for 36,561 stars observed by the RAdial Velocity Experiment (RAVE), an ambitious spectroscopic survey of our Galaxy at Galactic latitudes |b| > 25 Degree-Sign and with magnitudes in the range 9 release of the RAVE chemical catalog is complementary to the third RAVE data release of radial velocities and stellar parameters, and it contains chemical abundances for the elements Mg, Al, Si, Ca, Ti, Fe, and Ni, with a mean error of {approx}0.2 dex, as judged from accuracy tests performed on synthetic and real spectra. Abundances are estimated through a dedicated processing pipeline in which the curve of growth of individual lines is obtained from a library of absorption line equivalent widths to construct a model spectrum that is then matched to the observed spectrum via a {chi}{sup 2} minimization technique. We plan to extend this pipeline to include estimates for other elements, such as oxygen and sulfur, in future data releases.

  18. Radionuclide release rates from spent fuel for performance assessment modeling

    SciTech Connect (OSTI)

    Curtis, D.B.

    1994-11-01T23:59:59.000Z

    In a scenario of aqueous transport from a high-level radioactive waste repository, the concentration of radionuclides in water in contact with the waste constitutes the source term for transport models, and as such represents a fundamental component of all performance assessment models. Many laboratory experiments have been done to characterize release rates and understand processes influencing radionuclide release rates from irradiated nuclear fuel. Natural analogues of these waste forms have been studied to obtain information regarding the long-term stability of potential waste forms in complex natural systems. This information from diverse sources must be brought together to develop and defend methods used to define source terms for performance assessment models. In this manuscript examples of measures of radionuclide release rates from spent nuclear fuel or analogues of nuclear fuel are presented. Each example represents a very different approach to obtaining a numerical measure and each has its limitations. There is no way to obtain an unambiguous measure of this or any parameter used in performance assessment codes for evaluating the effects of processes operative over many millennia. The examples are intended to suggest by example that in the absence of the ability to evaluate accuracy and precision, consistency of a broadly based set of data can be used as circumstantial evidence to defend the choice of parameters used in performance assessments.

  19. MODELING ATMOSPHERIC RELEASES OF TRITIUM FROM NUCLEAR INSTALLATIONS

    SciTech Connect (OSTI)

    Okula, K

    2007-01-17T23:59:59.000Z

    Tritium source term analysis and the subsequent dispersion and consequence analyses supporting the safety documentation of Department of Energy nuclear facilities are especially sensitive to the applied software analysis methodology, input data and user assumptions. Three sequential areas in tritium accident analysis are examined in this study to illustrate where the analyst should exercise caution. Included are: (1) the development of a tritium oxide source term; (2) use of a full tritium dispersion model based on site-specific information to determine an appropriate deposition scaling factor for use in more simplified, broader modeling, and (3) derivation of a special tritium compound (STC) dose conversion factor for consequence analysis, consistent with the nature of the originating source material. It is recommended that unless supporting, defensible evidence is available to the contrary, the tritium release analyses should assume tritium oxide as the species released (or chemically transformed under accident's environment). Important exceptions include STC situations and laboratory-scale releases of hydrogen gas. In the modeling of the environmental transport, a full phenomenology model suggests that a deposition velocity of 0.5 cm/s is an appropriate value for environmental features of the Savannah River Site. This value is bounding for certain situations but non-conservative compared to the full model in others. Care should be exercised in choosing other factors such as the exposure time and the resuspension factor.

  20. Sources of secondary radionuclide releases from Hanford Operations

    SciTech Connect (OSTI)

    Heeb, C.M.; Gydesen, S.P.

    1994-05-01T23:59:59.000Z

    This report considers Hanford facilities and operations with the potential to be secondary radionuclide release sources. Facilities that produced radionuclides or processed products of fission reactions and were not covered in previous source term reports are included in this report. The following facilities are described and any potentially significant releases from them are estimated: PUREX (1956--1972, 1983--1988) and REDOX (1952--1967)--campaigns with non-standard feed material (materials other than fuel from single-pass reactors); C PLANT (Hot Semi-Works)--pilot plant and strontium recovery; Z Plant--plutonium finishing; U and UO{sub 3} Plants--uranium recovery; 108 B Plant--tritium extraction; 300 Area Plutonium Recycle Test Reactor (PRTR); 300 Area Low Power Test Reactors; Criticality Accidents; and 400 Area Fast Flux Test Facility (FFTF). The method of analysis was to examine each facility, give a brief description of its purpose and operations, and describe the types of material the facility processed as an indication of the radionuclides it had the potential to release. Where possible, specific radionuclides are estimated and values from the original documents are reported.

  1. Materials for storage and release of hydrogen and methods for preparing and using same

    DOE Patents [OSTI]

    Autrey, Thomas S. (West Richland, WA); Gutowska, Anna (Richland, WA); Shin, Yongsoon (Richland, WA); Li, Liyu (Richland, WA)

    2008-01-08T23:59:59.000Z

    The invention relates to materials for storing and releasing hydrogen and methods for preparing and using same. The materials exhibit fast release rates at low release temperatures and are suitable as fuel and/or hydrogen sources for a variety of applications such as automobile engines.

  2. Web address: http://www.sciencedaily.com/releases/2002/06/

    E-Print Network [OSTI]

    fermentation is not hard to do and the high volumes of gas produced make it a potential source of supply is released from the processing vessels intermittently, with a method in which the gas is released continuously during glucose processing resulted in 43 percent more hydrogen than when the gas was released

  3. Modeling and Simulation of Hazardous Material Releases for Homeland Security Applications

    E-Print Network [OSTI]

    Magee, Joseph W.

    i Modeling and Simulation of Hazardous Material Releases for Homeland Security Applications DRAFT in the breakout track on Hazardous Material Release at the workshop on Homeland Security Modeling & Simulation...........................................................................................................................................................1 2. Introduction to Hazardous Material Releases (HMR) and Associated DHS Guidance

  4. 5. Energy Production and Transport 5.1 Energy Release from Nuclear Reactions

    E-Print Network [OSTI]

    Peletier, Reynier

    5. Energy Production and Transport 5.1 Energy Release from Nuclear Reactions As mentioned when we looked at energy generation, it is now known that most of the energy radiated by stars must be released by nuclear reactions. In this section we will consider why it is that energy can be released by nuclear

  5. Efficiency of Solute Release from Thermoresponsive Poly(N-isopropylacrylamide) Gels: Electrochemical Studies

    E-Print Network [OSTI]

    Ciszkowska, Malgorzata "Maggie"

    Efficiency of Solute Release from Thermoresponsive Poly(N-isopropylacrylamide) Gels and efficiency of release of probe species from thermoresponsive gels due to their volume phase transition that found for the uncharged ferrocene derivative. The larger release efficiency for the charged probes

  6. UPTAKE AND RELEASE OF NITROGEN BY THE MACROALGAE GRACILARIA VERMICULOPHYLLA (RHODOPHYTA)1

    E-Print Network [OSTI]

    McGlathery, Karen

    , active- ly growing macroalgae release N to the water col- umn; yet little is known about the quantity the quantity of N released relative to assimilation and gross uptake by Gracilaria vermiculophylla (Ohmi%­90% of the biomass. There was good agreement between laboratory and field measurements of N uptake and release. Daily

  7. Effect of Drug Loading and Laser Surface Melting on Drug Release Profile from Biodegradable Polymer

    E-Print Network [OSTI]

    Yao, Y. Lawrence

    Effect of Drug Loading and Laser Surface Melting on Drug Release Profile from Biodegradable Polymer(L-lactic acid) is promising in drug delivery applications because it allows for drug release in a controlled manner. In a polymer-based drug delivery system, drug release is controlled by polymer degradation

  8. Effect of Drug Loading and Laser Surface Melting on Drug Release Profile from Biodegradable Polymer

    E-Print Network [OSTI]

    Yao, Y. Lawrence

    1 Effect of Drug Loading and Laser Surface Melting on Drug Release Profile from Biodegradable The biodegradable polymer such as poly(L-lactic acid) is promising in drug delivery applications because it allows for drug release in a controlled manner. In a polymer-based drug delivery system, drug release

  9. Modeling the climate response to a massive methane release from gas hydrates

    E-Print Network [OSTI]

    Renssen, Hans

    Modeling the climate response to a massive methane release from gas hydrates H. Renssen and C. J release from gas hydrates, Paleoceanography, 19, PA2010, doi:10.1029/2003PA000968. 1. Introduction [2] Catastrophic releases of methane gas from hydrates (clathrates) have been mentioned to be responsible for rapid

  10. Analysis of a Nuclear Accident: Fission and Activation Product Releases from the Fukushima Daiichi Nuclear Facility as Remote Indicators of Source Identification, Extent of Release, and State of Damaged Spent Nuclear Fuel

    SciTech Connect (OSTI)

    Schwantes, Jon M.; Orton, Christopher R.; Clark, Richard A.

    2011-12-05T23:59:59.000Z

    Evidence of the release Pu from the Fukushima Daiichi nuclear power station to the local environment and surrounding communities and estimates on fraction of total fuel inventory released

  11. DEMONSTRATION OF LEACHXS/ORCHESTRA CAPABILITIES BY SIMULATING CONSTITUENT RELEASE FROM A CEMENTITIOUS WASTE FORM IN A REINFORCED CONCRETE VAULT

    SciTech Connect (OSTI)

    Langton, C.; Meeussen, J.; Sloot, H.

    2010-03-31T23:59:59.000Z

    The objective of the work described in this report is to demonstrate the capabilities of the current version of LeachXS{trademark}/ORCHESTRA for simulating chemical behavior and constituent release processes in a range of applications that are relevant to the CBP. This report illustrates the use of LeachXS{trademark}/ORCHESTRA for the following applications: (1) Comparing model and experimental results for leaching tests for a range of cementitious materials including cement mortars, grout, stabilized waste, and concrete. The leaching test data includes liquid-solid partitioning as a function of pH and release rates based on laboratory column, monolith, and field testing. (2) Modeling chemical speciation of constituents in cementitious materials, including liquid-solid partitioning and release rates. (3) Evaluating uncertainty in model predictions based on uncertainty in underlying composition, thermodynamic, and transport characteristics. (4) Generating predominance diagrams to evaluate predicted chemical changes as a result of material aging using the example of exposure to atmospheric conditions. (5) Modeling coupled geochemical speciation and diffusion in a three layer system consisting of a layer of Saltstone, a concrete barrier, and a layer of soil in contact with air. The simulations show developing concentration fronts over a time period of 1000 years. (6) Modeling sulfate attack and cracking due to ettringite formation. A detailed example for this case is provided in a separate article by the authors (Sarkar et al. 2010). Finally, based on the computed results, the sensitive input parameters for this type of modeling are identified and discussed. The chemical speciation behavior of substances is calculated for a batch system and also in combination with transport and within a three layer system. This includes release from a barrier to the surrounding soil as a function of time. As input for the simulations, the physical and chemical properties of the materials are used. The test cases used in this demonstration are taken from Reference Cases for Use in the Cementitious Barriers Partnership (Langton et al. 2009). Before it is possible to model the release of substances from stabilized waste or radioactive grout through a cement barrier into the engineered soil barrier or natural soil, the relevant characteristics of such materials must be known. Additional chemical characteristics are needed for mechanistic modeling to be undertaken, not just the physical properties relevant for modeling of transport. The minimum required properties for modeling are given in Section 5.0, 'Modeling the chemical speciation of a material'.

  12. Changes in luteinizing hormone-releasing hormone-induced luteinizing hormone release during the estrous cycle using anesthetized cattle

    E-Print Network [OSTI]

    Keech, Cheryl Ann

    1984-01-01T23:59:59.000Z

    . If the ovulated egg does not become fertilized during the inherent lifespan of the corpus luteum, a luteolytic factor (found later to be prostaglandin-F2-alpha) is secreted f'rom the uterus to cause demise of the corpus luteum (Anderson et al. , 1969). Once... surges, allowing the selected follicles time to mature (Freeman et al. , 1976). Therefore, the corpus luteum does not exert a dominating effect during the rat estrous cyclei nevertheless, progesterone does influence LH release. Regulation...

  13. Experimental overview of axion searches

    SciTech Connect (OSTI)

    van Bibber, K.

    1995-06-28T23:59:59.000Z

    Experimental methods to search for the ``invisible axion`` (f{sub a} {much_gt} 250 GeV) are reviewed. The report focuses on the axion-photon coupling, both for laboratory experiments as well as those looking for stellar or cosmologically produced axions. The conclusion is that while the axion-photon mixing in principle would permit laboratory axion searches which are broadband in mass, in fact no such experiment could have the sensitivity to the axion, where m{sub afa} {approx} m{sub {pi}f{pi}}. The only experiments which promise to have any chance to find the axion are the microwave cavity experiments, which presume axions to constitute our galactic halo dark matter. The conversion of axions into a monochromatic microwave signal in a resonant circuit affords the experiment the extraordinary sensitivity required to see the axion, at the expense of being narrow-band in mass, i.e. a tuning experiment. Two such efforts are underway in the world.

  14. Compendium of Experimental Cetane Numbers

    SciTech Connect (OSTI)

    Yanowitz, J.; Ratcliff, M. A.; McCormick, R. L.; Taylor, J. D.; Murphy, M. J.

    2014-08-01T23:59:59.000Z

    This report is an updated version of the 2004 Compendium of Experimental Cetane Number Data and presents a compilation of measured cetane numbers for pure chemical compounds. It includes all available single compound cetane number data found in the scientific literature up until March 2014 as well as a number of unpublished values, most measured over the past decade at the National Renewable Energy Laboratory. This Compendium contains cetane values for 389 pure compounds, including 189 hydrocarbons and 201 oxygenates. More than 250 individual measurements are new to this version of the Compendium. For many compounds, numerous measurements are included, often collected by different researchers using different methods. Cetane number is a relative ranking of a fuel's autoignition characteristics for use in compression ignition engines; it is based on the amount of time between fuel injection and ignition, also known as ignition delay. The cetane number is typically measured either in a single-cylinder engine or a constant volume combustion chamber. Values in the previous Compendium derived from octane numbers have been removed, and replaced with a brief analysis of the correlation between cetane numbers and octane numbers. The discussion on the accuracy and precision of the most commonly used methods for measuring cetane has been expanded and the data has been annotated extensively to provide additional information that will help the reader judge the relative reliability of individual results.

  15. Predictions of the equation of state of cerium yield interesting insights into experimental results

    SciTech Connect (OSTI)

    Cherne, Frank J [Los Alamos National Laboratory; Jensen, Brian J [Los Alamos National Laboratory; Rigg, Paulo A [Los Alamos National Laboratory; Elkin, Vyacheslav M [VNIITF

    2009-01-01T23:59:59.000Z

    There has been much interest in the past in understanding the dynamic properties of phase changing materials. In this paper we begin to explore the dynamic properties of the complex material of cerium. Cerium metal is a good candidate material to explore capabilities in determining a dynamic phase diagram on account of its low dynamic phase boundaries, namely, the {gamma}-{alpha}, and {alpha}-liquid phase boundaries. Here we present a combination of experimental results with calculated results to try to understand the dynamic behavior of the material. Using the front surface impact technique, we performed a series of experiments which displayed a rarefaction shock upon release. These experiments show that the reversion shock stresses occur at different magnitudes, allowing us to plot out the {gamma}-{alpha} phase boundary. Applying a multiphase equation of state a broader understanding of the experimental results will be discussed.

  16. Experimental and Sampling Design for the INL-2 Sample Collection Operational Test

    SciTech Connect (OSTI)

    Piepel, Gregory F.; Amidan, Brett G.; Matzke, Brett D.

    2009-02-16T23:59:59.000Z

    This report describes the experimental and sampling design developed to assess sampling approaches and methods for detecting contamination in a building and clearing the building for use after decontamination. An Idaho National Laboratory (INL) building will be contaminated with BG (Bacillus globigii, renamed Bacillus atrophaeus), a simulant for Bacillus anthracis (BA). The contamination, sampling, decontamination, and re-sampling will occur per the experimental and sampling design. This INL-2 Sample Collection Operational Test is being planned by the Validated Sampling Plan Working Group (VSPWG). The primary objectives are: 1) Evaluate judgmental and probabilistic sampling for characterization as well as probabilistic and combined (judgment and probabilistic) sampling approaches for clearance, 2) Conduct these evaluations for gradient contamination (from low or moderate down to absent or undetectable) for different initial concentrations of the contaminant, 3) Explore judgment composite sampling approaches to reduce sample numbers, 4) Collect baseline data to serve as an indication of the actual levels of contamination in the tests. A combined judgmental and random (CJR) approach uses Bayesian methodology to combine judgmental and probabilistic samples to make clearance statements of the form "X% confidence that at least Y% of an area does not contain detectable contamination” (X%/Y% clearance statements). The INL-2 experimental design has five test events, which 1) vary the floor of the INL building on which the contaminant will be released, 2) provide for varying the amount of contaminant released to obtain desired concentration gradients, and 3) investigate overt as well as covert release of contaminants. Desirable contaminant gradients would have moderate to low concentrations of contaminant in rooms near the release point, with concentrations down to zero in other rooms. Such gradients would provide a range of contamination levels to challenge the sampling, sample extraction, and analytical methods to be used in the INL-2 study. For each of the five test events, the specified floor of the INL building will be contaminated with BG using a point-release device located in the room specified in the experimental design. Then quality control (QC), reference material coupon (RMC), judgmental, and probabilistic samples will be collected according to the sampling plan for each test event. Judgmental samples will be selected based on professional judgment and prior information. Probabilistic samples were selected with a random aspect and in sufficient numbers to provide desired confidence for detecting contamination or clearing uncontaminated (or decontaminated) areas. Following sample collection for a given test event, the INL building will be decontaminated. For possibly contaminated areas, the numbers of probabilistic samples were chosen to provide 95% confidence of detecting contaminated areas of specified sizes. For rooms that may be uncontaminated following a contamination event, or for whole floors after decontamination, the numbers of judgmental and probabilistic samples were chosen using the CJR approach. The numbers of samples were chosen to support making X%/Y% clearance statements with X = 95% or 99% and Y = 96% or 97%. The experimental and sampling design also provides for making X%/Y% clearance statements using only probabilistic samples. For each test event, the numbers of characterization and clearance samples were selected within limits based on operational considerations while still maintaining high confidence for detection and clearance aspects. The sampling design for all five test events contains 2085 samples, with 1142 after contamination and 943 after decontamination. These numbers include QC, RMC, judgmental, and probabilistic samples. The experimental and sampling design specified in this report provides a good statistical foundation for achieving the objectives of the INL-2 study.

  17. Experimental superplastic characterization of advanced aluminum alloys

    E-Print Network [OSTI]

    Kopp, Christopher Carl

    1991-01-01T23:59:59.000Z

    of America Chairman of Advisory Committee: Dr. R. E. Goforth An investigation into the experimental superplastic characterization of advanced aluminum alloys consisted of the design and assembly of an experimental test facility for measuring the effects... of strain-rate, temperature and hydrostatic pressure. The experimental apparatus was designed to accurately monitor these parameters while allowing for active control of the strain-rate and hydrostatic pressure. The results obtained from...

  18. The release of technetium from defense waste processing facility glasses

    SciTech Connect (OSTI)

    Ebert, W.L.; Wolf, S.F.; Bates, J.K.

    1995-12-31T23:59:59.000Z

    Laboratory tests are being, conducted using two radionuclide-doped Defense Waste Processing, Facility (DWPF) glasses (referred to as SRL 13IA and SRL 202A) to characterize the effects of the glass surface area/solution volume (SN) ratio on the release and disposition of {Tc} and several actinide elements. Tests are being conducted at 90{degrees}C in a tuff ground water solution at SN ratios of 10, 2000, and 20,000 m{sup {minus}1} and have been completed through 1822 days. The formation of certain alteration phases in tests at 2000 and 20,000 m{sup {minus}1} results in an increase in the dissolution rates of both classes. The release of {Tc} parallels that of B and Na under most test conditions and its release increases when alteration phases form. However, in tests with SRL 202A glass at 20,000 ,{sup {minus}1}, the {Tc} concentration in solution decreases coincidentally with an increase in the nitrite/nitrate ratio that indicates a decrease in the solution Eh. This may have occurred due to radiolysis, glass dissolution, the formation of alteration phases, or vessel interactions. Technetium that was reduced from {Tc}(VII) to {Tc}(IV) may have precipitated, thou-h the amount of {Tc} was too low to detect any {Tc}-bearing phases. These results show the importance of conducting long-term tests with radioactive glasses to characterize the behavior of radionuclides, rather than relying on the observed behavior of nonradioactive surrogates.

  19. An innovative acoustic sensor for first in-pile fission gas release determination - REMORA 3 experiment

    SciTech Connect (OSTI)

    Rosenkrantz, E.; Ferrandis, J. Y.; Augereau, F. [CNRS - Univ. Montpellier 2, Southern Electronic Inst., UMR 5214, F-34095 Montpellier (France); Lambert, T. [CEA DEN - Nuclear Energy Direction - Fuel Studies Dept. - Cadarache, F-13108 Saint-Paul-Lez-Durance (France); Fourmentel, D. [DEN Reactor Studies Dept., French Nuclear Energy and Alternative Energies Commission, CEA Cadarache, F-13108 Saint Paul-Lez-Durance (France); Tiratay, X. [CEA DEN, Nuclear Energy Div., Nuclear Reactors and Facilities Dept., F-91191 Gif Sur Yvette (France)

    2011-07-01T23:59:59.000Z

    A fuel rod has been instrumented with a new design of an acoustic resonator used to measure in a non destructive way the internal rod plenum gas mixture composition. This ultrasonic sensor has demonstrated its ability to operate in pile during REMORA 3 irradiation experiment carried out in the OSIRIS Material Testing Reactor (CEA Saclay, France). Due to very severe experimental conditions such as temperature rising up to 150 deg.C and especially, high thermal fluence level up to 3.5 10{sup 19} n.cm{sup 2}, the initial sensor gas speed of sound efficiency measurement was strongly reduced due to the irradiation effects on the piezo-ceramic properties. Nevertheless, by adding a differential signal processing method to the initial data analysis procedure validated before irradiation, the gas resonance peaks were successfully extracted from the output signal. From these data, the molar fractions variations of helium and fission gas were measured from an adapted Virial state equation. Thus, with this sensor, the kinetics of gas release inside fuel rods could be deduced from the in-pile measurements and specific calculations. These data will also give information about nuclear reaction effect on piezo-ceramics sensor under high neutron and gamma flux. (authors)

  20. Mobile Source Air Toxics Rule (released in AEO2008)

    Reports and Publications (EIA)

    2008-01-01T23:59:59.000Z

    On February 9, 2007, the Environmental Protection Agency (EPA) released its MSAT2 rule, which will establish controls on gasoline, passenger vehicles, and portable fuel containers. The controls are designed to reduce emissions of benzene and other hazardous air pollutants. Benzene is a known carcinogen, and the EPA estimates that mobile sources produced more than 70% of all benzene emissions in 1999. Other mobile source air toxics, including 1,3-butadiene, formaldehyde, acetaldehyde, acrolein, and naphthalene, also are thought to increase cancer rates or contribute to other serious health problems.

  1. Gas Release During Saltwell Pumping: Interpretation of Operational Data

    SciTech Connect (OSTI)

    J.L. Huckaby; L.M. Peurrung; P.A. Gauglitz

    1999-09-16T23:59:59.000Z

    The Hanford Site has 149 single-shell tanks (SSTs) containing radioactive waste that is a complex mix of radioactive and chemical products. Of these, 67 are known or suspected to have leaked liquid into the surrounding soil, while 82 are considered sound (Hanlon 1999). To minimize the amount of material that potentially could leak into the surrounding soil, all of the SSTs are scheduled to have drainable liquid removed and to be designated as interim stabilized. Of the SSTs, 119 have been declared stabilized, and only 30 require further processing (Hanlon 1999). Many of the tanks have been declared stabilized administratively, with only 45 tanks having had drainable liquid removed. The pending consent decree between the Washington State Department of Ecology and the Office of River Protection. (U.S. District Court Eastern District of Washington, 1999) sets a milestone to complete interim stabilization by September 2004. While process equipment exists for removing drainable liquid, and its operation is well known from previous pumping campaigns, a number of safety issues associated with the release and potential ignition of flammable gases within the tanks needs to be addressed. The safety concerns associated with flammable gases stem from the observation that some of the waste in the SSTs generates and retains hazardous quantities of flammable gases, including hydrogen, nitrous oxide, and ammonia. Of the 30 SSTs remaining to be declared interim stabilized, 29 need to have drainable liquid removed by saltwell pumping (waste in tank 241-C-106 will be removed by sluicing), and 16 of these are on the Flammable Gas Watch List (FGWL) (Hopkins 1995; Hanlon 1999). Most of these tanks are in Facility Group 2 (Noorani 1997); that is, it is believed that tank operations may induce the release of significant quantities of flammable gas, but gas release does not occur spontaneously. In particular, saltwell pumping to remove the interstitial liquid from SSTs is expected to cause the release of much of the retained gas, both insoluble (principally hydrogen) and soluble (principally ammonia), posing a number of safety concerns (Peurrung et al. 1997; Meader 1996).

  2. EM Recovery Act Press Releases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:RevisedAdvisory Board Contributions EMEM Recovery Act Press Releases EM Recovery

  3. FEMP Releases 10 Updated Covered Product Categories | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of Year 2010SaltInstrumentation andFE DOCKETPlanning toPeerReleases 10

  4. Release of the National Biofuels Action Plan | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSAR -Department of Energyasto the NRC CommitteeRelease of the

  5. Releases from the Heating Oil Reserve | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSAR -Department of Energyasto the NRC CommitteeRelease of

  6. DOE Releases 2013 Fuel Cell Technologies Market Report | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube| Department of Energy81stEnforcement EffortMidwestEnergy Releases 2013

  7. DOE Releases Updated Induced Seismicity Protocol | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube| Department of Energy81stEnforcementEnergy Information onReleases

  8. DOE Releases Federal Building Metering Guidance | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,Office of Policy, OAPM |TRU WasteAdministrator |20.1CPlanEP9425HeldReleases

  9. Department of Energy - Chromosomes News Release 4/13/2000

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem Not Found Item Not Found The itemAIR57451 CleanFOR IMMEDIATE RELEASE April 13, 2000

  10. DOE Releases Excess Uranium Inventory Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractions and Policy (2009)|PublishesDOEWasherMarch(RMP)Releases

  11. Department of Energy Releases 2011 Strategic Plan | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you0andEnergyGlobal Nuclearof a SecondSupport MaineDepartment ofReleases

  12. SANDIA REPORT SAND2012-1245C Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd US/German Workshop on

  13. SANDIA REPORT SAND2012-1365 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd US/German Workshop on65

  14. SANDIA REPORT SAND2013-2090 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd US/German Workshop

  15. SANDIA REPORT SAND2013-5238 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd US/German Workshop5238

  16. SANDIA REPORT SAND2013-7779 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd US/German

  17. SANDIA REPORT SAND2013-9875 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd US/German875 Unlimited

  18. SANDIA REPORT SAND2013-9880 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd US/German875

  19. SANDIA REPORT SAND2014-19199 Unlimited Release Printed October,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd US/German8754-19199

  20. SANDIA REPORT SAND952938 UC-706 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd52938 UC-706 Unlimited

  1. SANDIA REPORT SAND96-1197 UC-403 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd52938 UC-706 Unlimited7

  2. SANDIA REPORT SAND96-1198 UC-403 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd52938 UC-706 Unlimited78

  3. SANDIA REPORT SAND96-2031 UC-742 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd52938 UC-706 Unlimited788

  4. SANDIA REPORT SAND96-8243 UC-1409 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited Release Printed March 2012 2nd52938 UC-706

  5. Release for Announcement In, Energy Research Abstracts REA'DER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 c/) Release for Announcement In, Energy

  6. Release on M&O Selection Final

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection Technical s o Freiberge s 3 c/) Release for Announcement In, Energy

  7. Microsoft Word - Deep-Burn awards news release _2_.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighandSWPA / SPRA / USACE SWPAURTeC:8CO 2 FoamC M E T isJune5 1RELEASE Tim

  8. Effect of prostaglandin E? (PGE?) on the release of gonadotropin-releasing hormone (GnRH) from infundibular explants of cattle

    E-Print Network [OSTI]

    Stephens, Tyler Paul

    2001-01-01T23:59:59.000Z

    GnRH neuronal terminals located in the infundibulum of rodents have been shown to release GnRH when stimulated with PGE? in vivo and in vitro. The effect of PGE? on the release of GnRH has not been determined in cattle. Thus, the objective...

  9. SAMPLING DECISIONS IN OPTIMUM EXPERIMENTAL DESIGN IN ...

    E-Print Network [OSTI]

    ssager

    on a fixed time horizon T = [0,tf] with differential states y : T ?? Rny , fixed model ...... mal experimental design of a catalytic fixed bed reactor, in Proceedings of ...

  10. Experimental Investigation of Effect of Injection Parameters...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Experimental Investigation of Effect of Injection Parameters, Compression Ratio and Ultra-cooled EGR on CI Engine Performance and Emissions Low temperature combustion,...

  11. Catalyst by Design - Theoretical, Nanostructural, and Experimental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emission Treatment Catalyst Catalyst by Design - Theoretical, Nanostructural, and Experimental Studies of Emission Treatment Catalyst Poster presented at the 16th Directions in...

  12. Integrating Experimental Design into Your Program

    Broader source: Energy.gov [DOE]

    How you can use experimental design in energy efficiency programs in order to make them the most successful and cost-effective programs that they can be.

  13. Spinally-mediated hyperalgesia in experimental diabetes

    E-Print Network [OSTI]

    Ramos, Khara M.

    2007-01-01T23:59:59.000Z

    non- insulin-dependent diabetes mellitus, and IGF treatmentin Experimental Diabetes A dissertation submitted in partial1 Introduction 1.1 Diabetes mellitus ………………………………………………. 1.2

  14. Sandia Energy - Experimental Smart Outlet Brings Flexibility...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Experimental Smart Outlet Brings Flexibility, Resiliency to Grid Architecture Home Energy Assurance Renewable Energy Energy Surety Energy Grid Integration News Energy Efficiency...

  15. RHIC | String Theory Predicts an Experimental Result

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that originally appeared in the online publication symmetry breaking. A first: String theory predicts an experimental result One of the biggest criticisms of string theory is that...

  16. Flexible Pressure Sensors: Modeling and Experimental Characterization

    E-Print Network [OSTI]

    Viana, J.C.

    Flexible capacitive pressure sensors fabricated with nanocomposites were experimentally characterized and results compared with simulations from analytical modeling. Unlike traditional diaphragm silicon pressure sensors, ...

  17. Shockless compression and release behavior of beryllium to 110?GPa

    SciTech Connect (OSTI)

    Brown, J. L.; Knudson, M. D.; Alexander, C. S.; Asay, J. R. [Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States)

    2014-07-21T23:59:59.000Z

    A magnetohydrodynamic loading technique was used to shocklessly compress beryllium to peak longitudinal stresses of 19–110?GPa and, subsequently, unload in order to determine both the compressive response and also the shear stress supported upon release. Loading strain rates were on the order of 10{sup 6?}s{sup ?1}, while the unloading rates were nearly constant at 3?×?10{sup 5?}s{sup ?1}. Velocimetry was used to monitor the ramp and release behavior of a beryllium/lithium fluoride window interface. After applying window corrections to infer in situ beryllium velocities, a Lagrangian analysis was employed to determine the material response. The Lagrangian wavespeed-particle velocity response is integrated to generate the stress-strain path, average change in shear stress over the elastic unloading, and estimates of the shear modulus at peak compression. These data are used to infer the pressure dependence of the flow strength at the unloading rate. Comparisons to several strength models reveal good agreement to 45?GPa, but the data indicate 20%–30% higher strength near 100?GPa.

  18. Fission gas release restrictor for breached fuel rod

    DOE Patents [OSTI]

    Kadambi, N. Prasad (Gaithersburg, MD); Tilbrook, Roger W. (Monroeville, PA); Spencer, Daniel R. (Unity Twp., PA); Schwallie, Ambrose L. (Greensburg, PA)

    1986-01-01T23:59:59.000Z

    In the event of a breach in the cladding of a rod in an operating liquid metal fast breeder reactor, the rapid release of high-pressure gas from the fission gas plenum may result in a gas blanketing of the breached rod and rods adjacent thereto which impairs the heat transfer to the liquid metal coolant. In order to control the release rate of fission gas in the event of a breached rod, the substantial portion of the conventional fission gas plenum is formed as a gas bottle means which includes a gas pervious means in a small portion thereof. During normal reactor operation, as the fission gas pressure gradually increases, the gas pressure interiorly of and exteriorly of the gas bottle means equalizes. In the event of a breach in the cladding, the gas pervious means in the gas bottle means constitutes a sufficient restriction to the rapid flow of gas therethrough that under maximum design pressure differential conditions, the fission gas flow through the breach will not significantly reduce the heat transfer from the affected rod and adjacent rods to the liquid metal heat transfer fluid flowing therebetween.

  19. Potential detection systems for monitoring UF{sub 6} releases

    SciTech Connect (OSTI)

    Beck, D.E.; Bostick, W.D.; Armstrong, D.P.; McNeely, J.R.; Stockdale, J.A.D.

    1994-09-01T23:59:59.000Z

    In the near future, the Nuclear Regulatory Commission (NRC) will begin to regulate the gaseous diffusion plants. Them is a concern that the smoke detectors currently used for uranium hexafluoride (UF{sub 6}) release detection will not meet NRC safety system requirements such as high reliability and rapid response. The NRC`s position is that licensees should utilize state-of-the-art equipment such as hydrogen fluoride (HF) detectors that would provide more dependable detection of a UF{sub 6} release. A survey of the literature and current vendor information was undertaken to define the state-of-the-art and commercial availability of HF (or other appropriate) detection systems. For the purpose of this report, classification of the available HF detection systems is made on the basis of detection principle (e.g., calorimetric, electrochemical, separational, or optical). Emphasis is also placed on whether the device is primarily sensitive to response from a point source (e.g., outleakage in the immediate vicinity of a specific set of components), or whether the device is potentially applicable to remote sensing over a larger area. Traditional HF point source monitoring typically uses gas sampling tubes or coated paper tapes with color developing indicator, portable and small area HF monitors are often based upon electrochemical or extractive/separational systems; and remote sensing by optical systems holds promise for indoor and outdoor large area monitoring (including plant boundary/ambient air monitoring).

  20. Photo-triggered release in polyamide nanosized capsules

    SciTech Connect (OSTI)

    Marturano, V.; Ambrogi, V. [Department of Chemical, Materials and Production Engineering, University of Naples Federico II, Piazzale Tecchio 80, 80125 Napoli (Italy); Cerruti, P. [Institute of Polymer Chemistry and Technology (ICTP-CNR), via Campi Flegrei 34, 80078 Pozzuoli (Italy); Giamberini, M.; Tylkowski, B. [University Rovira i Virgili, Department of Chemical Engineering, Av. Paisos Catalans 26, 43007 Tarragona (Spain)

    2014-05-15T23:59:59.000Z

    In this work, nanosized capsules based on a lightly cross-linked polyamide containing azobenzene moieties in the main chain were synthesized by miniemulsion interfacial polymerization. The obtained nanocapsules were loaded either with toluene or with the fluorescent probe coumarin-6 as a core. Diameters of the nanocapsules were in the 100-900 nm range, depending on the selected emulsion conditions. The morphology and shape of the samples were observed by TEM and SEM while the emulsion droplets and nanocapsules size was measured by DLS. Under continuous UV irradiation the polymer underwent E-Z photoisomerization allowing the release of the encapsulated material. Variation in diameter of the nanocapsules with the time of UV irradiation was detected through DLS analysis. 10-30% growth was observed, depending on the sample. The kinetics of release of coumarin-6 was followed by spectrofluorimetry in ethanol. In absence of irradiation, the fluorescence intensity appeared to be constant over time, while it increased when the sample was irradiated with 360 nm UV light.

  1. Status of the ORNL Aerosol Release and Transport Project

    SciTech Connect (OSTI)

    Adams, R.E.

    1985-01-01T23:59:59.000Z

    The behavior of aerosols assumed to be characteristic of those generated during light water reactor (LWR) accident sequences and released into containment is being studied. Recent activities in the ORNL Aerosol Release and Transport Project include studies of (1) the thermal hydraulic conditions existing during Nuclear Safety Pilot Plant (NSPP) aerosol tests in steam-air environments, (2) the thermal output and aerosol mass generation rates for plasma torch aerosol generators, and (3) the influence of humidity on the shape of agglomerated aerosols of various materials. A new Aerosol-Moisture Interaction Test (AMIT) facility was prepared at the NSPP site to accommodate the aerosol shape studies; several tests with Fe/sub 2/O/sub 3/ aerosol have been conducted. In addition to the above activities a special study was conducted to determine the suitability of the technique of aerosol production by plasma torch under the operating conditions of future tests of the LWR Aerosol Containment Experiments (LACE) at the Hanford Engineering Development Laboratory. 3 refs., 2 figs., 7 tabs.

  2. ITER --"INTERNATIONAL THERMONUCLEAR EXPERIMENTAL RESEARCH PROGRAM".

    E-Print Network [OSTI]

    ITER -- "INTERNATIONAL THERMONUCLEAR EXPERIMENTAL RESEARCH PROGRAM". ORGANIZATION TO DIRECT WORLD plasmas and thermonuclear burn processes (cost -$1.5-36)2. (2) An expanded, more ambitious international Thermonuclear Experimental Research Program" by L. J. Perkins #12;NORMAL-CONDUCTING COPPER OPTIONS FOR THE ITER

  3. Gaseous Sulfate Solubility in Glass: Experimental Method

    SciTech Connect (OSTI)

    Bliss, Mary

    2013-11-30T23:59:59.000Z

    Sulfate solubility in glass is a key parameter in many commercial glasses and nuclear waste glasses. This report summarizes key publications specific to sulfate solubility experimental methods and the underlying physical chemistry calculations. The published methods and experimental data are used to verify the calculations in this report and are expanded to a range of current technical interest. The calculations and experimental methods described in this report will guide several experiments on sulfate solubility and saturation for the Hanford Waste Treatment Plant Enhanced Waste Glass Models effort. There are several tables of sulfate gas equilibrium values at high temperature to guide experimental gas mixing and to achieve desired SO3 levels. This report also describes the necessary equipment and best practices to perform sulfate saturation experiments for molten glasses. Results and findings will be published when experimental work is finished and this report is validated from the data obtained.

  4. Combining adaptive and designed statistical experimentation : process improvement, data classification, experimental optimization and model building

    E-Print Network [OSTI]

    Foster, Chad Ryan

    2009-01-01T23:59:59.000Z

    Research interest in the use of adaptive experimentation has returned recently. This historic technique adapts and learns from each experimental run but requires quick runs and large effects. The basis of this renewed ...

  5. RCRA/UST, superfund, and EPCRA hotline training module. Introduction to toxics release inventory: Estimating releases (EPCRA section 313; 40 CFR part 372). Updated as of November 1995

    SciTech Connect (OSTI)

    NONE

    1996-03-01T23:59:59.000Z

    The module provides an overview of general techniques that owners and operators of reporting facilities may use to estimate their toxic chemical releases. It exlains the basic release estimation techniques used to determine the chemical quantities reported on the Form R and uses those techniques, along with fundamental chemical or physical principles and properties, to estimate releases of listed toxic chemicals. It converts units of mass, volume, and time. It states the rules governing significant figures and rounding techniques, and references general and industry-specific estimation documents.

  6. Drill bit assembly for releasably retaining a drill bit cutter

    DOE Patents [OSTI]

    Glowka, David A. (Austin, TX); Raymond, David W. (Edgewood, NM)

    2002-01-01T23:59:59.000Z

    A drill bit assembly is provided for releasably retaining a polycrystalline diamond compact drill bit cutter. Two adjacent cavities formed in a drill bit body house, respectively, the disc-shaped drill bit cutter and a wedge-shaped cutter lock element with a removable fastener. The cutter lock element engages one flat surface of the cutter to retain the cutter in its cavity. The drill bit assembly thus enables the cutter to be locked against axial and/or rotational movement while still providing for easy removal of a worn or damaged cutter. The ability to adjust and replace cutters in the field reduces the effect of wear, helps maintains performance and improves drilling efficiency.

  7. MICROBIAL TRANSFORMATIONS OF RADIONUCLIDES RELEASED FROM NUCLEAR FUEL REPROCESSING PLANTS.

    SciTech Connect (OSTI)

    FRANCIS,A.J.

    2006-10-18T23:59:59.000Z

    Microorganisms can affect the stability and mobility of the actinides U, Pu, Cm, Am, Np, and the fission products Tc, I, Cs, Sr, released from nuclear fuel reprocessing plants. Under appropriate conditions, microorganisms can alter the chemical speciation, solubility and sorption properties and thus could increase or decrease the concentrations of radionuclides in solution and the bioavailability. Dissolution or immobilization of radionuclides is brought about by direct enzymatic action or indirect non-enzymatic action of microorganisms. Although the physical, chemical, and geochemical processes affecting dissolution, precipitation, and mobilization of radionuclides have been investigated, we have only limited information on the effects of microbial processes. The mechanisms of microbial transformations of the major and minor actinides and the fission products under aerobic and anaerobic conditions in the presence of electron donors and acceptors are reviewed.

  8. A Short History of Hanford Waste Generation, Storage, and Release

    SciTech Connect (OSTI)

    Gephart, Roy E.

    2003-10-01T23:59:59.000Z

    Nine nuclear reactors and four reprocessing plants at Hanford produced nearly two-thirds of the plutonium used in the United States for government purposes . These site operations also created large volumes of radioactive and chemical waste. Some contaminants were released into the environment, exposing people who lived downwind and downstream. Other contaminants were stored. The last reactor was shut down in 1987, and the last reprocessing plant closed in 1990. Most of the human-made radioactivity and about half of the chemicals remaining onsite are kept in underground tanks and surface facilities. The rest exists in the soil, groundwater, and burial grounds. Hanford contains about 40% of all the radioactivity that exists across the nuclear weapons complex. Today, environmental restoration activities are under way.

  9. The IACOB spectroscopic database: recent updates and first data release

    E-Print Network [OSTI]

    Simón-Díaz, S; Apellániz, J Maíz; Castro, N; Herrero, A; Garcia, M; Pérez-Prieto, J A; Caon, N; Alacid, J M; Camacho, I; Dorda, R; Godart, M; González-Fernández, C; Holgado, G; Rübke, K

    2015-01-01T23:59:59.000Z

    The IACOB project is an ambitious long-term project which is contributing to step forward in our knowledge about the physical properties and evolution of Galactic massive stars. The project aims at building a large database of high-resolution, multi-epoch, spectra of Galactic OB stars, and the scientific exploitation of the database using state-of-the-art models and techniques. In this proceeding, we summarize the latest updates of the IACOB spectroscopic database and highlight some of the first scientific results from the IACOB project; we also announce the first data release and the first public version of the iacob-broad tool for the line-broadening characterization of OB-type spectra.

  10. The First Data Release of the Sloan Digital Sky Survey

    E-Print Network [OSTI]

    Abazajian, Kevork N; Agüeros, Marcel A; Allam, Sahar S; Anderson, Scott F; Annis, James; Bahcall, Neta A; Baldry, Ivan K; Bastian, Steven; Berlind, Andreas A; Bernardi, Mariangela; Blanton, Michael R; Blythe, Norman; Bochanski, John J; Boroski, William N; Brewington, Howard; Briggs, John W; Brinkmann, J; Brunner, Robert J; Budavari, Tamas; Carey, Larry N; Carr, Michael A; Castander, F J; Chiu, Kuenley; Collinge, Matthew J; Connolly, A J; Covey, Kevin R; Csabai, Istvan; Dodelson, Scott; Doi, Mamoru; Dong, Feng; Eisenstein, Daniel J; Evans, Michael L; Fan, Xiaohui; Feldman, Paul D; Finkbeiner, Douglas P; Friedman, Scott D; Frieman, Joshua A; Fukugita, Masataka; Gal, Roy R; Gillespie, Bruce; Glazebrook, Karl; Gonzalez, Carlos F; Gray, Jim; Grebel, Eva K; Grodnicki, Lauren; Gunn, James E; Gurbani, Vijay K; Hall, Patrick B; Hao, Lei; Harbeck, Daniel; Harris, Frederick H; Harris, Hugh C; Harvanek, Michael J; Hawley, Suzanne L; Heckman, Timothy M; Helmboldt, J F; Hendry, John S; Hennessy, Gregory S; Hindsley, Robert B; Hogg, David W; Holmgren, Donald; Holtzman, Jon A; Homer, Lee; Hui, Lam; Ichikawa, Shin-ichi; Ichikawa, Takashi; Inkmann, John P; Ivezic, Z; Jester, Sebastian; Johnston, David E; Jordan, Beatrice; Jordan, Wendell P; Jorgensen, Anders M; Juric, Mario; Kauffmann, Guinevere; Kent, Stephen M; Kleinman, S J; Knapp, G R; Kniazev, Alexei Yu; Kron, Richard G; Krzesinski, Jurek; Kunszt, Peter Z; Kuropatkin, Nickolai; Lamb, Donald Q; Lampeitl, Hubert; Laubscher, Bryan E; Lee, Brian C; Leger, R French; Li No Lan; Lidz, Adam; Lin, Huan; Loh Yeong Shang; Long, Daniel C; Loveday, Jon; Lupton, Robert H; Malik, Tanu; Margon, Bruce; McGehee, Peregrine M; McKay, Timothy A; Meiksin, Avery; Miknaitis, Gajus A; Moorthy, Bhasker K; Munn, Jeffrey A; Murphy, Tara; Nakajima, Reiko; Narayanan, Vijay K; Nash, Thomas; Neilsen, Erich; Newberg, Heidi Jo; Newman, Peter R; Nichol, Robert C; Nicinski, Tom; Nieto-Santisteban, Maria; Nitta, Atsuko; Odenkirchen, Michael; Okamura, Sadanori; Ostriker, Jeremiah P; Owen, Russell; Padmanabhan, Nikhil; Peoples, John; Pier, Jeffrey R; Pindor, Bartosz; Pope, Adrian C; Quinn, Thomas R; Rafikov, R R; Raymond, Sean N; Richards, Gordon T; Richmond, Michael W; Rix, Hans-Walter; Rockosi, Constance M; Schaye, Joop; Schlegel, David J; Schneider, D P; Schroeder, Joshua; Scranton, Ryan; Sekiguchi, Maki; Seljak, Uros; Sergey, Gary; Sesar, Branimir; Sheldon, E S; Shimasaku, Kazu; Siegmund, Walter A; Silvestri, Nicole M; Sinisgalli, Allan J; Sirko, Edwin; Smith, Allyn J; Smolcic, Vernesa; Snedden, Stephanie A; Stebbins, Albert; Steinhardt, Charles; Stinson, Gregory M; Stoughton, Chris; Strateva, Iskra V; Strauss, Michael A; SubbaRao, Mark; Szalay, Alexander S; Istvan Szapudi; Szkody, Paula; Tasca, Lidia; Tegmark, Max; Thakar, Aniruddha R; Tremonti, Christy A; Tucker, Douglas L; Uomoto, Alan; Vanden Berk, Daniel E; Vandenberg, Jan; Vogeley, Michael S; Voges, Wolfgang; Vogt, Nicole P; Walkowicz, Lucianne M; Weinberg, David H; West, Andrew A; White, Simon D M; Wilhite, Brian C; Willman, Beth; Xu Yong Hong; Yanny, Brian; Yarger, Jean; Yasuda, Naoki; Yip, Ching-Wa; Yocum, D R; York, Donald G; Zakamska, Nadia L; Zheng, Wei; Zibetti, Stefano; Zucker, Daniel B

    2003-01-01T23:59:59.000Z

    The Sloan Digital Sky Survey has validated and made publicly available its First Data Release. This consists of 2099 square degrees of five-band (u, g, r, i, z) imaging data, 186,240 spectra of galaxies, quasars, stars and calibrating blank sky patches selected over 1360 square degrees of this area, and tables of measured parameters from these data. The imaging data go to a depth of r ~ 22.6 and are photometrically and astrometrically calibrated to 2% rms and 100 milli-arcsec rms per coordinate, respectively. The spectra cover the range 3800--9200 A, with a resolution of 1800--2100. Further characteristics of the data are described, as are the data products themselves.

  11. DEM simulation of experimental dense granular packing

    SciTech Connect (OSTI)

    Hanifpour, Maryam; Allaei, Mehdi Vaez [Department of Physics, University of Tehran, Tehran (Iran, Islamic Republic of); Francois, Nicolas; Saadatfar, Mohammad [Department of Applied Mathematics, Research School of Physics and Engineering, Australian National University, Canberra (Australia)

    2013-06-18T23:59:59.000Z

    In this study we present numerical analysis performed on the experimental results of sphere packings of mono-sized hard sphere whose packing fraction spans across a wide range of 0.59<{Phi}<0.72. Using X-ray Computed Tomography (XCT), we have full access to the 3D structure of the granular packings. Numerical analysis performed on thr data provides the first experimental proofs of how densification affects local order parameters. Furthermore by combining Discrete Element Method (DEM) and the experimental results from XCT, we investigate how the intergranular forces change with the onset of crystallization.

  12. US and UK release joint report on nuclear arms control verification...

    National Nuclear Security Administration (NNSA)

    release joint report on nuclear arms control verification | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

  13. Department of Energy Releases New Roadmap to Guide Public-Private...

    Energy Savers [EERE]

    New Roadmap to Guide Public-Private Cybersecurity Initiatives Department of Energy Releases New Roadmap to Guide Public-Private Cybersecurity Initiatives September 15, 2011 -...

  14. WECC releases its first-ever transmission plan for the Western Interconnection

    Broader source: Energy.gov [DOE]

    The Western Electricity Coordinating Council (WECC) announced the release of its first 10-Year Regional Transmission Plan (Plan) for the Western Interconnection.

  15. Controlled release of gentamicin from polyelectrolyte multilayers to treat implant-related infection

    E-Print Network [OSTI]

    Moskowitz, Joshua Seth

    2012-01-01T23:59:59.000Z

    Polyelectrolyte multilayered (PEM) coatings were fabricated to incorporate and release the small, hydrophilic antibiotic gentamicin from implant surfaces for infection control. The use of a cationic hydrolytically cleavable ...

  16. Selective heating of multiple nanoparticles as a new strategy for controlled release applications

    E-Print Network [OSTI]

    Wijaya, Andy

    2009-01-01T23:59:59.000Z

    Utilization of nanoparticle heating for controlled release application was proposed and its feasibility was explored. The proposed method was formulated by realizing that biomolecule - nanoparticle conjugation is heat ...

  17. arginine-induced glucagon release: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environmental Sciences and Ecology Websites Summary: MEDIA RELEASE 2 November 2011 Report urges more action to prepare BC for uncertain food future British Columbians should...

  18. Division of Water, Parts 670-672: Reservoir Releases Regulations (New York)

    Broader source: Energy.gov [DOE]

    Water releases from New York State reservoirs are subject to monitoring and regulation; these sections establish rules for the Schoharie, Shandaken Tunnel-Esopus Creek, Cannonsville, Pepacton,...

  19. UNBC Press Release: The University of Northern British Columbia is launching a unique program next

    E-Print Network [OSTI]

    Northern British Columbia, University of

    UNBC Press Release: The University of Northern British Columbia is launching a unique program next is a perfect fit for UNBC and for the region." #12;

  20. Rules and Regulations for the Investigation and Remediation of Hazardous Material Releases (Rhode Island)

    Broader source: Energy.gov [DOE]

    These regulations establish procedures for the investigation and remediation of contamination resulting from the unpermitted release of hazardous materials. The regulations aim to protect water...