National Library of Energy BETA

Sample records for dc 20585-0623 printed

  1. Census Snapshot: Washington, DC

    E-Print Network [OSTI]

    Romero, Adam P.; Baumle, Amanda K; Badgett, M.V. Lee; Gates, Gary J

    2007-01-01

    INSTITUTE CENSUS SNAPSHOT | WASHINGTON, DC. | DECEMBER 2007WASHINGTON, D.C. Adam P. Romero, Public Policy Fellow AmandaINSTITUTE CENSUS SNAPSHOT | WASHINGTON, DC. | DECEMBER 2007

  2. U.S. GOVERNMENT PRINTING OFFICE WASHINGTON

    E-Print Network [OSTI]

    Heller, Don

    U.S. GOVERNMENT PRINTING OFFICE WASHINGTON : For sale by the Superintendent of Documents, U­1800 Fax: (202) 512­2250 Mail: Stop SSOP, Washington, DC 20402­0001 90-136 PDF 2004 H.R. 3039

  3. Radio frequency dc-dc power conversion

    E-Print Network [OSTI]

    Rivas, Juan, 1976-

    2007-01-01

    THIS THESIS addresses the development of system architectures and circuit topologies for dc-dc power conversion at very high frequencies. The systems architectures that are developed are structured to overcome limitations ...

  4. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    however, DC was less amenable to transmission over longtransmission 32 km to Buffalo, even though the loads at that time were entirely DC.

  5. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2014-01-01

    ABORATORY Building Scale DC Microgrids Chris Marnay, Stevenemployer. Building Scale DC Microgrids Chris Marnay, IEEEgenerally known as microgrids (or µgrids). The dominance of

  6. Government Printing Office Requirements

    Broader source: Energy.gov [DOE]

    This section describes the Government Printing Office (GPO) requirements for all print materials, whether printed electronically or on paper. This includes requirements for printing and copying for...

  7. DC source assemblies

    DOE Patents [OSTI]

    Campbell, Jeremy B; Newson, Steve

    2013-02-26

    Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

  8. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2014-01-01

    involves DC directly, e.g. fuel cells, fuels, but electricthe likely emergence of fuel cells and required batteriesphotovoltaic cells, fuel cells, power quality, converters,

  9. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    the likely emergence of fuel cells and required batteriesphotovoltaic cells, fuel cells, power quality, converters,DC) generation, e.g. fuel cells (FCs), from combustion

  10. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    resources, a 10 kW vertical axis wind turbine, and Fig. 4AC-grid Fig. 3. Vertical axis wind turbine in the AIT DC µ

  11. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2014-01-01

    resources, a 10 kW vertical axis wind turbine, and Fig. 4the µgrid Fig. 3. Vertical axis wind turbine in the AIT DC µ

  12. U.S. GOVERNMENT PRINTING OFFICE WASHINGTON

    E-Print Network [OSTI]

    U.S. GOVERNMENT PRINTING OFFICE WASHINGTON : For sale by the Superintendent of Documents, U­1800 Fax: (202) 512­2104 Mail: Stop IDCC, Washington, DC 20402­0001 52­894PDF 2010 THE NEXT GENERATION WU, Oregon BRIAN BAIRD, Washington BRAD MILLER, North Carolina DANIEL LIPINSKI, Illinois GABRIELLE

  13. U.S. GOVERNMENT PRINTING OFFICE WASHINGTON

    E-Print Network [OSTI]

    .S. Government Printing Office Internet: bookstore.gpo.gov Phone: toll free (866) 512­1800; DC area (202) 512 RESOURCES JEFF BINGAMAN, New Mexico, Chairman DANIEL K. AKAKA, Hawaii BYRON L. DORGAN, North Dakota RON TESTER, Montana PETE V. DOMENICI, New Mexico LARRY E. CRAIG, Idaho CRAIG THOMAS, Wyoming LISA MURKOWSKI

  14. Multilevel DC link inverter

    DOE Patents [OSTI]

    Su, Gui-Jia

    2003-06-10

    A multilevel DC link inverter and method for improving torque response and current regulation in permanent magnet motors and switched reluctance motors having a low inductance includes a plurality of voltage controlled cells connected in series for applying a resulting dc voltage comprised of one or more incremental dc voltages. The cells are provided with switches for increasing the resulting applied dc voltage as speed and back EMF increase, while limiting the voltage that is applied to the commutation switches to perform PWM or dc voltage stepping functions, so as to limit current ripple in the stator windings below an acceptable level, typically 5%. Several embodiments are disclosed including inverters using IGBT's, inverters using thyristors. All of the inverters are operable in both motoring and regenerating modes.

  15. DC attenuation meter

    DOE Patents [OSTI]

    Hargrove, Douglas L.

    2004-09-14

    A portable, hand-held meter used to measure direct current (DC) attenuation in low impedance electrical signal cables and signal attenuators. A DC voltage is applied to the signal input of the cable and feedback to the control circuit through the signal cable and attenuators. The control circuit adjusts the applied voltage to the cable until the feedback voltage equals the reference voltage. The "units" of applied voltage required at the cable input is the system attenuation value of the cable and attenuators, which makes this meter unique. The meter may be used to calibrate data signal cables, attenuators, and cable-attenuator assemblies.

  16. DC arc weld starter

    DOE Patents [OSTI]

    Campiotti, Richard H. (Tracy, CA); Hopwood, James E. (Oakley, CA)

    1990-01-01

    A system for starting an arc for welding uses three DC power supplies, a high voltage supply for initiating the arc, an intermediate voltage supply for sustaining the arc, and a low voltage welding supply directly connected across the gap after the high voltage supply is disconnected.

  17. Windows XP - LPR Printing

    E-Print Network [OSTI]

    dbrown

    2004-07-27

    Printer Setup in Windows XP. To print to the math department printers in Windows XP, “Print Services for Unix” must be installed. To begin installation of “

  18. Auxiliary resonant DC tank converter

    DOE Patents [OSTI]

    Peng, Fang Z. (Knoxville, TN)

    2000-01-01

    An auxiliary resonant dc tank (ARDCT) converter is provided for achieving soft-switching in a power converter. An ARDCT circuit is coupled directly across a dc bus to the inverter to generate a resonant dc bus voltage, including upper and lower resonant capacitors connected in series as a resonant leg, first and second dc tank capacitors connected in series as a tank leg, and an auxiliary resonant circuit comprising a series combination of a resonant inductor and a pair of auxiliary switching devices. The ARDCT circuit further includes first clamping means for holding the resonant dc bus voltage to the dc tank voltage of the tank leg, and second clamping means for clamping the resonant dc bus voltage to zero during a resonant period. The ARDCT circuit resonantly brings the dc bus voltage to zero in order to provide a zero-voltage switching opportunity for the inverter, then quickly rebounds the dc bus voltage back to the dc tank voltage after the inverter changes state. The auxiliary switching devices are turned on and off under zero-current conditions. The ARDCT circuit only absorbs ripples of the inverter dc bus current, thus having less current stress. In addition, since the ARDCT circuit is coupled in parallel with the dc power supply and the inverter for merely assisting soft-switching of the inverter without participating in real dc power transmission and power conversion, malfunction and failure of the tank circuit will not affect the functional operation of the inverter; thus a highly reliable converter system is expected.

  19. Improved DC Gun Insulator

    SciTech Connect (OSTI)

    M.L. Neubauer, K.B. Beard, R. Sah, C. Hernandez-Garcia, G. Neil

    2009-05-01

    Many user facilities such as synchrotron light sources and free electron lasers require accelerating structures that support electric fields of 10-100 MV/m, especially at the start of the accelerator chain where ceramic insulators are used for very high gradient DC guns. These insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic, creating a buildup of charge and causing eventual puncture. A novel ceramic manufacturing process is proposed. It will incorporate bulk resistivity in the region where it is needed to bleed off accumulated charge caused by highly energetic electrons. This process will be optimized to provide an appropriate gradient in bulk resistivity from the vacuum side to the air side of the HV standoff ceramic cylinder. A computer model will be used to determine the optimum cylinder dimensions and required resistivity gradient for an example RF gun application. A ceramic material example with resistivity gradient appropriate for use as a DC gun insulator will be fabricated by glazing using doping compounds and tested.

  20. Design Considerations for Very High Frequency dc-dc Converters

    E-Print Network [OSTI]

    Perreault, Dave

    the gating power while ensuring fast on- off transitions of the semiconductor switch. The rectifier of switching power converters operating at greatly increased switching frequencies. Greatly increasedDesign Considerations for Very High Frequency dc-dc Converters Juan M. Rivas, David Jackson, Olivia

  1. Aalborg Universitet Power flow analysis for DC voltage droop controlled DC microgrids

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Power flow analysis for DC voltage droop controlled DC microgrids Li, Chendan). Power flow analysis for DC voltage droop controlled DC microgrids. In Proceedings of the 11th.aau.dk on: juli 07, 2015 #12;Power flow analysis for DC voltage droop controlled DC microgrids Chendan Li

  2. Triple voltage dc-to-dc converter and method

    DOE Patents [OSTI]

    Su, Gui-Jia (Knoxville, TN)

    2008-08-05

    A circuit and method of providing three dc voltage buses and transforming power between a low voltage dc converter and a high voltage dc converter, by coupling a primary dc power circuit and a secondary dc power circuit through an isolation transformer; providing the gating signals to power semiconductor switches in the primary and secondary circuits to control power flow between the primary and secondary circuits and by controlling a phase shift between the primary voltage and the secondary voltage. The primary dc power circuit and the secondary dc power circuit each further comprising at least two tank capacitances arranged in series as a tank leg, at least two resonant switching devices arranged in series with each other and arranged in parallel with the tank leg, and at least one voltage source arranged in parallel with the tank leg and the resonant switching devices, said resonant switching devices including power semiconductor switches that are operated by gating signals. Additional embodiments having a center-tapped battery on the low voltage side and a plurality of modules on both the low voltage side and the high voltage side are also disclosed for the purpose of reducing ripple current and for reducing the size of the components.

  3. Multi-Level DC/DC Power Conversion System with Multiple DC Sources

    E-Print Network [OSTI]

    Tolbert, Leon M.

    boost converter. Experimental results are provided to confirm the analysis and control concept. I, instead of connecting all batteries in series as one power source and a bi-directional boost converter. INTRODUCTION Traditional dc/dc converters require at least one inductive component, which is bulky, heavy

  4. DC-DC converter current source fed naturally commutated brushless DC motor drive 

    E-Print Network [OSTI]

    Khopkar, Rahul Vijaykumar

    2004-11-15

    the hard switchings by natural turn-off, thereby eliminating the heatsinks as well as the large dc link capacitor. A controlled rectifier together with a large inductor act as the current source. The only disadvantage is the large value of the dc link...

  5. Bi-Directional DC-DC Converter for PHEV Applications

    SciTech Connect (OSTI)

    Abas Goodarzi

    2011-01-31

    Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

  6. Printing Instructions for MobilePrint Using Web Release

    E-Print Network [OSTI]

    Boonstra, Rudy

    Printing Instructions for MobilePrint Using Web Release: Step 1: Navigate to the MobilePrint Portal in the Web Release window, as shown below. DO NOT click print, or your document will be sent directly document using MobilePrint Web Release Select the printer you wish to print to. By default, the last

  7. DC Pro Software Tool Suite

    SciTech Connect (OSTI)

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  8. Catalog of DC Appliances and Power Systems

    SciTech Connect (OSTI)

    Garbesi, Karina; Vossos, Vagelis; Shen, Hongxia

    2010-10-13

    This document catalogs the characteristics of current and potential future DC products and power systems.

  9. Interaction of DC-DC converters and submarine power cables in offshore wind farm DC networks 

    E-Print Network [OSTI]

    Wood, Thomas Benedict

    2014-06-30

    Offshore wind power is attracting increasing levels of research and investment. The use of HVDC transmission and the development of DC grids are topics with similar high levels of interest that go hand in hand with the ...

  10. Generating Isolated Outputs in a Multilevel Modular Capacitor Clamped DC-DC Converter

    E-Print Network [OSTI]

    Tolbert, Leon M.

    -dc converters based on inductive energy transfer method (IETM) such as buck, boost, and buck-boost converter967 Generating Isolated Outputs in a Multilevel Modular Capacitor Clamped DC-DC Converter (MMCCC clamped dc-dc converter. The multilevel modular capacitor clamped converter (MMCCC) has several key

  11. Light-weight DC to very high voltage DC converter

    DOE Patents [OSTI]

    Druce, R.L.; Kirbie, H.C.; Newton, M.A.

    1998-06-30

    A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current. 1 fig.

  12. Switching coordination of distributed dc-dc converters for highly efficient photovoltaic power plants

    DOE Patents [OSTI]

    Agamy, Mohammed; Elasser, Ahmed; Sabate, Juan Antonio; Galbraith, Anthony William; Harfman Todorovic, Maja

    2014-09-09

    A distributed photovoltaic (PV) power plant includes a plurality of distributed dc-dc converters. The dc-dc converters are configured to switch in coordination with one another such that at least one dc-dc converter transfers power to a common dc-bus based upon the total system power available from one or more corresponding strings of PV modules. Due to the coordinated switching of the dc-dc converters, each dc-dc converter transferring power to the common dc-bus continues to operate within its optimal efficiency range as well as to optimize the maximum power point tracking in order to increase the energy yield of the PV power plant.

  13. Compact organic vapor jet printing print head

    DOE Patents [OSTI]

    Forrest, Stephen R; McGraw, Gregory

    2013-12-24

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print header further includes a first layer comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  14. DC to DC power converters and methods of controlling the same

    SciTech Connect (OSTI)

    Steigerwald, Robert Louis; Elasser, Ahmed; Sabate, Juan Antonio; Todorovic, Maja Harfman; Agamy, Mohammed

    2012-12-11

    A power generation system configured to provide direct current (DC) power to a DC link is described. The system includes a first power generation unit configured to output DC power. The system also includes a first DC to DC converter comprising an input section and an output section. The output section of the first DC to DC converter is coupled in series with the first power generation unit. The first DC to DC converter is configured to process a first portion of the DC power output by the first power generation unit and to provide an unprocessed second portion of the DC power output of the first power generation unit to the output section.

  15. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    5V DC USB power from wall sockets. .. 52 viprovides 5V DC USB power from wall sockets. Reproduced withPower over Ethernet 51 Universal Serial Bus Wall

  16. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    main conclusions about off-grid markets for DC appliances,and power systems. Mature Off-Grid Markets for DC Appliancesapplications include off-grid residential, telecom, remote

  17. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    AEE Solar. 2010 Renewable Energy Design Guide and Catalog.2009, 2010, Interstate Renewable Energy Council. RetrievedDC) generated by on-site renewable energy systems in its DC

  18. Ecological benefits of dc power transmission

    SciTech Connect (OSTI)

    Kutuzova, N. B.

    2011-05-15

    The environmental effects of dc overhead transmission lines are examined. The major effects of ac and dc transmission lines are compared. Dc lines have advantages compared to ac lines in terms of electrical safety for people under the lines, biological effects, corona losses, and clearance width.

  19. Analysis and Optimization of Switched-Capacitor DC-DC Converters

    E-Print Network [OSTI]

    Sanders, Seth

    on conduction loss) of a ladder-type converter is found to be superior to that of a conventional boost converterAnalysis and Optimization of Switched-Capacitor DC-DC Converters Michael D. Seeman, Seth R. Sanders­ Analysis methods are developed that fully determine a switched-capacitor (SC) dc-dc converter's steady

  20. 3D Printing Electronics

    E-Print Network [OSTI]

    Stryk, Oskar von

    the top six were granted further funding by DARPA and were also given an ATLAS robot to continue is the connectivity. Here in the US everyone assumes high ... Boeing Utilizing Sigma Labs (SGLB) "PrintRite3D" System for 3D Printing · -- B6 Sigma Labs (ticker SGLB) is not the same company as Sigma Technologies

  1. QER Public Meeting in Washington, DC: Enhancing Energy Infrastructure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington, DC: Enhancing Energy Infrastructure Resiliency and Addressing Vulnerabilities QER Public Meeting in Washington, DC: Enhancing Energy Infrastructure Resiliency and...

  2. Inkjet printed electronics using copper nanoparticle ink

    E-Print Network [OSTI]

    Kang, Jin Sung; Kim, Hak Sung; Ryu, Jongeun; Thomas Hahn, H.; Jang, Seonhee; Joung, Jae Woo

    2010-01-01

    providing printed electronics using copper nanoparticles.0049-3 Inkjet printed electronics using copper nanoparticleand quality of the printed electronics. In this paper, we

  3. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    mainly fluorescent and LED lighting and DC ceiling fans. TheFluorescent, CFL Lighting systems: LED Fluorescent and CFLlamps CFL lamps LED lamp CFL floodlight Lighting systems:

  4. Simultaneous distribution of AC and DC power

    DOE Patents [OSTI]

    Polese, Luigi Gentile

    2015-09-15

    A system and method for the transport and distribution of both AC (alternating current) power and DC (direct current) power over wiring infrastructure normally used for distributing AC power only, for example, residential and/or commercial buildings' electrical wires is disclosed and taught. The system and method permits the combining of AC and DC power sources and the simultaneous distribution of the resulting power over the same wiring. At the utilization site a complementary device permits the separation of the DC power from the AC power and their reconstruction, for use in conventional AC-only and DC-only devices.

  5. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    sited renewable energy market for the foreseeable future. Inup renewable energy systems increases in the future, chargerenewable energy sources [5]. If direct-DC has a future in

  6. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    similarly to an uninterruptible power supply. Lifetime:utility coupled with uninterruptible power requirements forloads serviced by DC uninterruptible power supplies in data

  7. SSL Demonstration: Parking Garage Lighting, Washington, DC

    SciTech Connect (OSTI)

    2013-06-01

    GATEWAY program report brief summarizing an SSL parking garage demonstration at the Dept. of Labor headquarters parking garage in Washington, DC.

  8. Reliability Assessment of Fault-Tolerant Dc-Dc Converters for Photovoltaic Applications

    E-Print Network [OSTI]

    Liberzon, Daniel

    Reliability Assessment of Fault-Tolerant Dc-Dc Converters for Photovoltaic Applications Sairaj V in photovoltaic energy processing applications is presented. The proposed approach acknowledges the influence through several case studies. Index Terms-- Markov reliability modeling, photovoltaic systems, power

  9. Design of a very high frequency resonant boost DC-DC converter

    E-Print Network [OSTI]

    Burkhart, Justin (Justin Michael)

    2010-01-01

    THIS thesis explores the development of a very high frequency DC-DC resonant boost converter. The topology examined features low parts count and fast transient response but suffers from higher device stresses compared to ...

  10. Design and evaluation of a very high frequency dc/dc converter

    E-Print Network [OSTI]

    Pilawa-Podgurski, Robert C. N

    2007-01-01

    This thesis presents a resonant boost topology suitable for very high frequency (VHF, 30-300 MHz) dc-dc power conversion. The proposed design is a fixed frequency, fixed duty ratio resonant converter featuring low device ...

  11. Design and characterization of a radio-frequency dc/dc power converter

    E-Print Network [OSTI]

    Jackson, David A. (David Alexander)

    2005-01-01

    The use of radio-frequency (RF) amplifier topologies in dc/dc power converters allows the operating frequency to be increased by more than two orders of magnitude over the frequency of conventional converters. This enables ...

  12. Radio frequency dc-dc converters : device characterization, topology evaluation, and design

    E-Print Network [OSTI]

    Leitermann, Olivia

    2008-01-01

    High frequency power conversion is attractive for the opportunities it affords for improved performance. Dc-dc converters operating at high frequencies use smaller-valued energy storage elements, which tend to be physically ...

  13. Design and analysis of multiphase DC-DC converters with coupled inductors 

    E-Print Network [OSTI]

    Shi, Meng

    2007-09-17

    , directly coupled inductors have the benefit of low sensitivity to input variation at high frequencies. In addition, the proposed new structure for multiphase DC-DC converters has excellent current sharing performance and reduced current ripple. Computer...

  14. Computer-aided optimization of DC/DC converters for automotive applications

    E-Print Network [OSTI]

    Neugebauer, Timothy C.

    This paper investigates computer-aided optimization of DC/DC converters, with a focus on converters for dual-voltage automotive electrical systems. A new CAD optimization approach based on Monte Carlo search methods is ...

  15. The capacitively coupled converter (C³) for high power DC-DC conversion 

    E-Print Network [OSTI]

    Khan, Shahriar

    1992-01-01

    THE CAPACITIVELY COUPLED CONVERTER (C3) FOR HIGH POWER DC-DC CONVERSION A Thesis by SHAHRIAR KHAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE May 1992 Major Subject: Electrical Engineering THE CAPACITIVELY COUPLED CONVERTER (Cs) FOR HIGH POWER DC-DC CONVERSION A Thesis by SHAHRIAR KHAN Approved as to style and content by: Mehrdad Ehsani (Chair of Committee) Prasad Enjeti...

  16. High Speed CMOS Output Stage for Integrated DC-DC Converters Wai Tung Ng*, Marian Changl

    E-Print Network [OSTI]

    Ng, Wai Tung

    to attain maximum channel width per unit area for low on-resistance. A typical MF layout and its equivalent DC/DC converters is characterized by power conversion efficiency, transient response, size and cost is introduced to enhance the switching speed and power conversion efficiency of low voltage integrated DC

  17. Design and development of a DC-DC converter for a fuel cell inverter system 

    E-Print Network [OSTI]

    Gopinath, Rajesh

    2001-01-01

    (FEC)' organized by the Department of Energy and IEEE in August 2001. An efficient 3-terminal DC-DC push-pull topology was adopted to meet the performance and stringent cost constraints. A broad overview of the DC-AC inverter and its control is also...

  18. Scaling of Inkjet-Printed Transistors using Novel Printing Techniques

    E-Print Network [OSTI]

    Tseng, Huai-Yuan

    2011-01-01

    studies on semiconductor material properties in this lengthProperties of Ink?Jet?Printed Silver Nanoparticulate Electrode and Organic Semiconductor,? Advanced Materials,Properties of Ink?Jet?Printed Silver Nanoparticulate Electrode and Organic Semiconductor,? Advanced Materials,

  19. High Voltage DC Transmission 2 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    1 High Voltage DC Transmission 2 1.0 Introduction Interconnecting HVDC within an AC system requires conversion from AC to DC and inversion from DC to AC. We refer to the circuits which provide conversion from AC to DC as rectifiers and the circuits which provide conversion from DC to AC as inverters. The term

  20. High voltage DC power supply

    DOE Patents [OSTI]

    Droege, Thomas F. (Batavia, IL)

    1989-01-01

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively.

  1. High voltage DC power supply

    DOE Patents [OSTI]

    Droege, T.F.

    1989-12-19

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively. 7 figs.

  2. DC-based magnetic field controller

    DOE Patents [OSTI]

    Kotter, Dale K. (Shelley, ID); Rankin, Richard A. (Ammon, ID); Morgan, John P,. (Idaho Falls, ID)

    1994-01-01

    A magnetic field controller for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage.

  3. Idea Generation 3D printing

    E-Print Network [OSTI]

    Stylianou, Yannis

    2012 Idea Generation 3D printing at nanoscale Cruising on electrical roads Pushing back against Centre micro and nanoscale 15 Taking 3D printing to the nanoscale 18 Fighting cancer with a "lab

  4. Content-adaptive lenticular prints

    E-Print Network [OSTI]

    Tompkin, James

    Lenticular prints are a popular medium for producing automultiscopic glasses-free 3D images. The light field emitted by such prints has a fixed spatial and angular resolution. We increase both perceived angular and spatial ...

  5. Organic vapor jet printing system

    DOE Patents [OSTI]

    Forrest, Stephen R

    2012-10-23

    An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

  6. Alcohol Outlets and Violent Crime in Washington D.C.

    E-Print Network [OSTI]

    Franklin, F. Abron; LaVeist, Thomas A.; Webster, Daniel W.; Pan, William K.

    2010-01-01

    of Violence and Disorder. Washington, D.C. : The Urbanand Violent Crime in Washington D.C. F. Abron Franklin II,Involvement in Crime. Washington, D.C. : U.S. Department of

  7. EA-351 DC Energy Dakota, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dakota, LLC Order authorizing DC Energy Dakota, LLC to export electric energy to Canada EA-351 DC Energy Dakota, LLC More Documents & Publications Application to Export...

  8. INL Efficiency and Security Testing of EVSE, DC Fast Chargers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems...

  9. Report Now Available: DC Microgrids Scoping Study--Estimate of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Now Available: DC Microgrids Scoping Study--Estimate of Technical and Economic Benefits (March 2015) Report Now Available: DC Microgrids Scoping Study--Estimate of Technical...

  10. Energy Department Completes Cool Roof Installation on DC Headquarters...

    Energy Savers [EERE]

    Energy Department Completes Cool Roof Installation on DC Headquarters Building to Save Money by Saving Energy Energy Department Completes Cool Roof Installation on DC Headquarters...

  11. AVTA: Battery Testing - DC Fast Charging's Effects on PEV Batteries...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Battery Testing - DC Fast Charging's Effects on PEV Batteries AVTA: Battery Testing - DC Fast Charging's Effects on PEV Batteries The Vehicle Technologies Office's Advanced Vehicle...

  12. AVTA: Hasdec DC Fast Charging Testing Results | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hasdec DC Fast Charging Testing Results AVTA: Hasdec DC Fast Charging Testing Results The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a...

  13. Low Cost, High Temperature, High Ripple Current DC Bus Capacitors...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Cost, High Temperature, High Ripple Current DC Bus Capacitors Low Cost, High Temperature, High Ripple Current DC Bus Capacitors 2010 DOE Vehicle Technologies and Hydrogen...

  14. Inkjet-Printed Ferromagnetic Nanoparticles for Miniaturization of Flexible Printed RF Inductors

    E-Print Network [OSTI]

    Tentzeris, Manos

    the inductor for flexible printed electronics. This flexible, miniaturized inductor can be coupledInkjet-Printed Ferromagnetic Nanoparticles for Miniaturization of Flexible Printed RF Inductors to apply ferromagnetic nanomaterial is investigated to produce a truly flexible, printed RF inductor

  15. WiPrint: 3D Printing Your Wireless Coverage Author: Justin Chan

    E-Print Network [OSTI]

    WiPrint: 3D Printing Your Wireless Coverage Author: Justin Chan Advisor: Xia Zhou Dartmouth WiPrint, a novel approach to customiz- ing wireless signal maps using 3D printed glossy reflectors

  16. NOISE AND OPTIMIZATION OF THE dc SQUID

    E-Print Network [OSTI]

    Tesche, Claudia Denke

    2011-01-01

    unpublished). A. Van der Ziel, Noise (Prentice-Hall, Inc. ,MAY 29 19ft LBL-8510 MASTER NOISE AND OPTIMIZATION OF THE deW-7405-ENG-48 LBL-8510 NOISE AND OPTIMIZATION OF THE dc

  17. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    DC/AC-Hybrid) LED AC LED Power (W) Figure 8. Efficacywith the same power consumption. For LEDs, the improvementLED light-emitting diode viii lumen a measure of the power

  18. DC High School Science Bowl Regionals

    Broader source: Energy.gov [DOE]

    This event is the Washington, D.C. High School Regional competition for the US National Science Bowl. The regional competition is run by the Office of Economic Impact and Diversity, and the...

  19. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    direct-DC. The timing of EV charging relative to PV outputadded a hypothetical EV charging load. The EV load could bewith building loads. EV charging standards [26, 27

  20. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    Ovens Electric Heat Pumps Geothermal Heat Pumps Solar WaterOvens Appliance DC-internal product power (Watts) Personal Computers and Related Equipment Rechargeable Electronics Refrigerators Room Air Conditioners Security Systems Solar

  1. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    produce a DC-compatible dishwasher that uses 51% less energyCooking Equipments Dishwashers Lighting Electric Other Waterby end-Use ( TWh) Dishwashers DVDs/VCRs DVDs/VCRs Freezers

  2. American Institute of Aeronautics and Astronautics Active System Identification of a DC-DC Converter Using

    E-Print Network [OSTI]

    American Institute of Aeronautics and Astronautics 1 Active System Identification of a DC and Computer Engineering, UCB 425. #12;American Institute of Aeronautics and Astronautics 2 analysis10

  3. Part removal of 3D printed parts

    E-Print Network [OSTI]

    Peña Doll, Mateo

    2014-01-01

    An experimental study was performed to understand the correlation between printing parameters in the FDM 3D printing process, and the force required to remove a part from the build platform of a 3D printing using a patent ...

  4. Improved DC Gun Insulator Assembly

    SciTech Connect (OSTI)

    Sah, R.; Dudas, A.; Neubauer, M. L.; Poelker, M.; Surles-Law, K. E.L.

    2010-05-23

    Many user fa­cil­i­ties such as syn­chrotron ra­di­a­tion light sources and free elec­tron lasers re­quire ac­cel­er­at­ing struc­tures that sup­port elec­tric fields of 10-100 MV/m, es­pe­cial­ly at the start of the ac­cel­er­a­tor chain where ce­ram­ic in­su­la­tors are used for very high gra­di­ent DC guns. These in­su­la­tors are dif­fi­cult to man­u­fac­ture, re­quire long com­mis­sion­ing times, and often ex­hib­it poor re­li­a­bil­i­ty. Two tech­ni­cal ap­proach­es to solv­ing this prob­lem will be in­ves­ti­gat­ed. First­ly, in­vert­ed ce­ram­ics offer so­lu­tions for re­duced gra­di­ents be­tween the elec­trodes and ground. An in­vert­ed de­sign will be pre­sent­ed for 350 kV, with max­i­mum gra­di­ents in the range of 5-10 MV/m. Sec­ond­ly, novel ce­ram­ic man­u­fac­tur­ing pro­cess­es will be stud­ied, in order to pro­tect triple junc­tion lo­ca­tions from emis­sion, by ap­ply­ing a coat­ing with a bulk re­sis­tiv­i­ty. The pro­cess­es for cre­at­ing this coat­ing will be op­ti­mized to pro­vide pro­tec­tion as well as be used to coat a ce­ram­ic with an ap­pro­pri­ate gra­di­ent in bulk re­sis­tiv­i­ty from the vac­u­um side to the air side of an HV stand­off ce­ram­ic cylin­der. Ex­am­ple in­su­la­tor de­signs are being com­put­er mod­elled, and in­su­la­tor sam­ples are being man­u­fac­tured and test­ed

  5. A DC-DC Converter-Based PEM Fuel Cell System Emulator

    E-Print Network [OSTI]

    Boyer, Edmond

    A DC-DC Converter-Based PEM Fuel Cell System Emulator Daoud Rezzak, Farid Khoucha, Mohamed Benbouzid, Abdelaziz Kheloui and Abdeslam Mamoune Abstract--The Proton Exchange Membrane Fuel Cell (PEMFC power supplies. Fuel cell systems are characterized by high costs and complex auxiliary devices

  6. DC's Marble ceiling : urban height and its regulation in Washington, DC

    E-Print Network [OSTI]

    Trueblood, Andrew Tyson

    2009-01-01

    Washington, DC has a unique urban form that is the result of a century-old law. Through the narrow lens of DC's height limit, I survey a range of topics related to urban height, starting with a review of its history of ...

  7. Method to Improve Total Dose Radiation Hardness in a CMOS dc-dc Boost

    E-Print Network [OSTI]

    Wilamowski, Bogdan Maciej

    Method to Improve Total Dose Radiation Hardness in a CMOS dc-dc Boost Converter Huadian Pan in a wide range of radiation environment, with increasing total dose radiation, The efticieney also greatly for low-power applications (1],[2]. It is known that radiation has many effects on MOSFETs

  8. Development of a 55 kW 3X DC-DC Converter for HEV Systems

    E-Print Network [OSTI]

    Tolbert, Leon M.

    efficiency provide the great potential for the very high temperature operation. The circuit parameter design converter and a traction motor to drive the vehicle. In most commercial HEV systems, the power converter, 37996 Abstract--The design of a 55 kW 3X dc-dc converter is presented for hybrid electric vehicle (HEV

  9. Time domain design of digital compensators for PWM DC-DC converters

    E-Print Network [OSTI]

    transformation and discretization. Digital PID controllers for a Buck and Boost type converters were implemented (via the various transformation algorithms), a digital compensator operates, in reality, in the sampledTime domain design of digital compensators for PWM DC-DC converters Mor Mordechai Peretz and Sam

  10. 5 kW Multilevel DC-DC Converter for Hybrid Electric and Fuel Cell Automotive

    E-Print Network [OSTI]

    Tolbert, Leon M.

    5 kW Multilevel DC-DC Converter for Hybrid Electric and Fuel Cell Automotive Applications Faisal H) for future hybrid electric vehicle and fuel cell automotive applications will be presented in this paper will impact if the 42V/14V dual bus system will be a successful and cost effective solution for future

  11. Aalborg Universitet Optimization with System Damping Restoration for Droop Controlled DC-DC

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    --The parallel operation of dc-dc converters is widely used in distribution systems and uninterruptable power supply systems. Droop control along with virtual resistance (VR) is considered a simple and reliable method for achieving wireless power sharing among converters. In order to enhance the efficiency

  12. DC WRRC Report No. 44 THE D.C. WATER RESOURCES RESEARCH CENTER

    E-Print Network [OSTI]

    District of Columbia, University of the

    . The agreements will reduce the possibility of water shortages during low flows or pollution crisis and insure for new expanded treatment facilities. Finally, the recently completed Rock Creek water shed study has#12;DC WRRC Report No. 44 THE D.C. WATER RESOURCES RESEARCH CENTER THE UNIVERSITY OF THE DISTRICT

  13. Pennsylvania Company Develops Solar Cell Printing Technology

    Broader source: Energy.gov [DOE]

    The technology uses Plextronics’ conductive inks that can be printed by manufacturers worldwide to make solar cells, potentially as easily as they might print a newspaper.

  14. SciTech Connect: "3d printing"

    Office of Scientific and Technical Information (OSTI)

    3d printing" Find + Advanced Search Term Search Semantic Search Advanced Search All Fields: "3d printing" Semantic Semantic Term Title: Full Text: Bibliographic Data: Creator ...

  15. Homopolar dc motor and trapped flux brushless dc motor using high temperature superconductor materials

    SciTech Connect (OSTI)

    Crapo, A.D.; Lloyd, J.D. (Emerson Electric Co., St. Louis, MO (US))

    1991-03-01

    This paper reports on two motors designed and built for use with high temperature superconductor (HTSC) materials. They are a homopolar DC motor that will use HTSC field windings and a brushless DC motor that will use bulk HTSC material to trap flux in steel rotor poles. The HTSC field windings of the homopolar DC motor are designed to operate at 1000 Amperes/cm{sup 2} in a 0.010 Tesla (100 Gauss) field. In order to maximize torque in the homopolar DC motor, an iron magnetic circuit with small air gaps gives maximum flux for minimum Ampere turns in the field. A copper field winding version of the homopolar DC motor has been tested while the authors wait for 575 Ampere turn HTSC coils.

  16. Page | 1 Managed Print Project Outline Pull Printing

    E-Print Network [OSTI]

    Glasgow, University of

    in power and reductions in total print volume. 2. Reduce costs by implementing a cost the completion of these initiatives. The UK government's introduction of the Carbon Reduction Commitments (CRC.0 Project Outline Following a number of pilot exercises, the University is preparing to move to new printing

  17. An Exploration of the Perceptions and Utilizations of Networking Systems in Washington, D.C.

    E-Print Network [OSTI]

    Lindsey, Robynne

    2013-01-01

    Personal Interview. Washington, D.C. , July 25, 2013.Personal Interview. Washington, D.C. , August 12, 2013.Personal Interview. Washington, D.C. , July 17, 2013. 12

  18. FEDERAL COMMUNICATIONS COMMISSION Washington, DC 20554

    E-Print Network [OSTI]

    Bove Jr., V. Michael

    FCC 96­207 Before the FEDERAL COMMUNICATIONS COMMISSION Washington, DC 20554 In the Matter of a mechanism for a bit stream layer transmission standard (into which, e.g., MPEG­2 could fit) 3) The FCC: number of hours per day of digital television transmission, minimal Quality of Service specifications

  19. Halbach array DC motor/generator

    DOE Patents [OSTI]

    Merritt, Bernard T. (Livermore, CA); Dreifuerst, Gary R. (Livermore, CA); Post, Richard F. (Walnut Creek, CA)

    1998-01-01

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

  20. Halbach array DC motor/generator

    DOE Patents [OSTI]

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  1. Intense pulsed light sintering of copper nanoink for printed electronics

    E-Print Network [OSTI]

    Kim, Hak-Sung; Dhage, Sanjay R.; Shim, Dong-Eun; Hahn, H. Thomas

    2009-01-01

    copper nanoink for printed electronics Hak-Sung Kim · Sanjay1 Introduction Printed electronics techniques such as inkjetcomponents of printed electronics are conducting lines and ?

  2. SUBCONTRACT REPORT: DC-DC Converter for Fuel Cell and Hybrid Vehicles

    SciTech Connect (OSTI)

    Marlino, Laura D; Zhu, Lizhi

    2007-07-01

    The goal of this project is to develop and fabricate a 5kW dc-dc converter with a baseline 14V output capability for fuel cell and hybrid vehicles. The major objectives for this dc-dc converter technology are to meet: Higher efficiency (92%); High coolant temperature,e capability (105 C); High reliability (15 Years/150,000miles); Smaller volume (5L); Lower weight (6kg); and Lower cost ($75/kW). The key technical challenge for these converters is the 105 C coolant temperatures. The power switches and magnetics must be designed to sustain these operating temperatures reliably, without a large cost/mass/volume penalty.

  3. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    - DC Water and Sewer Authority (WASA) The Institutes received favorable responses from and met with the following new Advisory Board members: 1- Mr. Richard Gianni, Water Quality Manager, DC Water and Sewer

  4. Decoherence and dephasing errors caused by the dc Stark effect...

    Office of Scientific and Technical Information (OSTI)

    Decoherence and dephasing errors caused by the dc Stark effect in rapid ion transport Citation Details In-Document Search Title: Decoherence and dephasing errors caused by the dc...

  5. DC Microgrids Scoping Study: Estimate of Technical and Economic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    applications where the end-use loads are natively DC, e.g., computers, solid-state lighting, and building networks. These early DC applications may provide higher efficiency,...

  6. Persons Who Received the DC PSC's Emergency Petition and Complaint...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Persons Who Received the DC PSC's Emergency Petition and Complaint via E-mail on August 24, 2005 Persons Who Received the DC PSC's Emergency Petition and Complaint via E-mail on...

  7. Aalborg Universitet Hierarchical Control for Multiple DC-Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    , and energy storages (e.g., secondary battery and super capacitor) [7]­[15]. Normally, dc MGs are proposed

  8. Energy Training Session for DC Elementary School Teachers

    Broader source: Energy.gov [DOE]

    Are you an elementary school teacher in Washington, DC, looking for creative ideas to introduce energy curriculum to your students?

  9. Exploring the Raft River geothermal area, Idaho, with the dc...

    Open Energy Info (EERE)

    the dc resistivity method (Abstract) Abstract GEOTHERMAL ENERGY; GEOTHERMAL FIELDS; ELECTRICAL SURVEYS; IDAHO; GEOTHERMAL EXPLORATION; RAFT RIVER VALLEY; ELECTRIC CONDUCTIVITY;...

  10. Urbanisation de DC ANF Datacentres 2 Octobre 2014

    E-Print Network [OSTI]

    van Tiggelen, Bart

    Urbanisation de DC ANF Datacentres ­ 2 Octobre 2014 Cargese Urbanisation des Datacentres Romaric David david@unistra.fr Univerité de Strasbourg 2 Octobre 2014 #12;2 Urbanisation de DC ANF Datacentres constructeurs Conclusion #12;3 Urbanisation de DC ANF Datacentres ­ 2 Octobre 2014 Cargese Introduction Centre

  11. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    D.C. Water Resources Research Center Annual Technical Report FY 2007 D.C. Water Resources Research of the District of Columbia (DC) Water Resources Research Institute (the Institute) for the period of March 1 relevant water resources research results and transfer information to assist policy makers and residents

  12. Aalborg Universitet Hierarchical Control for Multiple DC Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Hierarchical Control for Multiple DC Microgrids Clusters Shafiee, Qobad). Hierarchical Control for Multiple DC Microgrids Clusters. I E E E Transactions on Energy Conversion, 29(4), 922. Dragicevic, J. C. Vasquez, and J. M. Guerrero, "Hierarchical Control for Multiple DC-Microgrids Clusters

  13. RF MEMS DC CONTACT SWTCHES FOR RECONFIGURABLE Presented to the

    E-Print Network [OSTI]

    Kassegne, Samuel Kinde

    RF MEMS DC CONTACT SWTCHES FOR RECONFIGURABLE ANTENNAS _______________ A Thesis Presented STATE UNIVERSITY The Undersigned Faculty Committee Approves the Thesis of Lei Zhou: RF DC Contact MEMS rock and water, water, through persistence, eventually wins. #12;vi ABSTRACT OF THE THESIS RF MEMS DC

  14. Q&A: Kristen Psaki of WeatherizeDC

    Broader source: Energy.gov [DOE]

    Roughly 20 percent of carbon emissions come from inefficient homes. The DC Project says it has found a way to mitigate emissions and create jobs, a winning combination. WeatherizeDC is the non-profit’s effort to use a community engagement model to help DC residents find green jobs and live a more energy efficient lifestyle.

  15. Energy Challenge Two: The WeatherizeDC Campaign

    Broader source: Energy.gov [DOE]

    WeatherizeDC is a campaign of The DC Project, a nonprofit based in Washington, D.C., founded by former leaders of the Obama for America campaign around a mission to advance economic and environmental justice by creating clean energy career opportunities for people who need them most.

  16. A single-inductor switching DC-DC converter with five outputs and ordered power-distributive control

    E-Print Network [OSTI]

    Le, Hanh-Phuc; Chae, Chang-Seok; Lee, Kwang-Chan; Wang, Se-Won; Cho, Gyu-Ha; Cho, Gyu-Hyeong

    2007-01-01

    integrated current mode boost converter in standard 3.3=5-Vef?ciency CMOS DC-DC boost converter with current sensingdeveloping reset ICs, boost converters for PM OLED, and SIMO

  17. Low Power DC-DC Converters and a Low Quiescent Power High PSRR Class-D Audio Amplifier 

    E-Print Network [OSTI]

    Torres, Joselyn

    2013-12-03

    High-performance DC-DC voltage converters and high-efficient class-D audio amplifiers are required to extend battery life and reduce cost in portable electronics. This dissertation focuses on new system architectures and design techniques...

  18. Design of a step-down DC-DC controller integrated circuit with adaptive dead-time control

    E-Print Network [OSTI]

    Li, Zhipeng, M. Eng. Massachusetts Institute of Technology

    2010-01-01

    A constant-frequency peak current mode synchronous step-down DC-DC controller integrated circuit has been designed with adaptive dead-time control. The adaptive dead-time control circuitry is implemented as digital ...

  19. Reinventing Shared Print: A Dynamic Service Vision for Shared Print Monographs in a Digital World (preprint)

    E-Print Network [OSTI]

    Stambaugh, Emily Kay

    2013-01-01

    fundamentally change the business model and architecture forphysical location. A new business model would be needed toand the underlying business model. Print Journals, Print

  20. Computer-Aided Optimization of dc/dc Converters for Automotive Applications Timothy C. Neugebauer David J. Perreault

    E-Print Network [OSTI]

    Perreault, Dave

    Computer-Aided Optimization of dc/dc Converters for Automotive Applications Timothy C. Neugebauer/dc converters, with a focus on converters for dual-voltage automotive electrical systems. A new CAD optimization is the next evolutionary step for automotive electrical systems. High-power loads will be moved to a new high

  1. Printed Optics: 3D Printing of Embedded Optical Elements for Interactive Devices

    E-Print Network [OSTI]

    Poupyrev, Ivan

    Printed Optics: 3D Printing of Embedded Optical Elements for Interactive Devices Karl D.D. Willis1 d Figure 1: Custom optical elements are fabricated with 3D printing and embedded in interactive), and embedded optoelectronics (d). ABSTRACT We present an approach to 3D printing custom optical ele- ments

  2. The Makerbot: Desktop 3D printing

    E-Print Network [OSTI]

    Roughan, Matthew

    The Makerbot: Desktop 3D printing Matthew Roughan School of Mathematical Sciences matthew is Lots of maths hidden in something like 3D printing Geometry and Linear algebra ++ Same math used

  3. Structural Integration of Silicon Solar Cells and Lithium-ion Batteries Using Printed Electronics

    E-Print Network [OSTI]

    Kang, Jin Sung

    2012-01-01

    4 Inkjet Printed Electronics Using Copper Nanoparticle29 Inkjet Printed Electronics For Multifunctional Compositenanocrystals toward printed electronics,” Nanotechnology,

  4. Improved DC Gun and Insulator Assembly

    SciTech Connect (OSTI)

    Neubauer, Michael; Johnson, Rolland P

    2015-01-11

    Many user facilities such as synchrotron radiation light sources and free electron lasers rely on DC high voltage photoguns with internal field gradients as high as 10 to 15 MV/m. These high gradients often lead to field emission which poses serious problems for the photocathode used to generate the electron beam and the ceramic insulators used to bias the photocathode at high voltage. Ceramic insulators are difficult to manufacture, require long commissioning times, and have poor reliability, in part because energetic electrons bury themselves in the ceramic causing a buildup of charge and eventual puncture, and also because large diameter ceramics are difficult to braze reliably. The lifetimes of photo cathodes inside high current DC guns exhibiting field emission are limited to less than a hundred hours. Reducing the surface gradients on the metals reduces the field emission, which serves to maintain the required ultrahigh vacuum condition. A novel gun design with gradients around 5 MV/m and operating at 350 kV, a major improvement over existing designs, was proposed that allows for the in-situ replacement of photo cathodes in axially symmetric designs using inverted ceramics. In this project, the existing JLAB CEBAF asymmetric gun design with an inverted ceramic support was modeled and the beam dynamics characterized. An improved structure was designed that reduces the surface gradients and improves the beam optics. To minimize the surface gradients, a number of electrostatic gun designs were studied to determine the optimum configuration of the critical electrodes within the gun structure. Coating experiments were carried out to create a charge dissipative coating for cylindrical ceramics. The phase II proposal, which was not granted, included the design and fabrication of an axially symmetric DC Gun with an inverted ceramic that would operate with less than 5 MV/m at 350 kV and would be designed with an in-situ replaceable photo-cathode.

  5. Quantitative Outgassing studies in DC Electrical breakdown

    E-Print Network [OSTI]

    Levinsen, Yngve Inntjore; Calatroni, Sergio; Taborelli, Mauro; Wünsch, Walter

    2010-01-01

    Breakdown in the accelerating structures sets an important limit to the performance of the CLIC linear collider. Vacuum degradation and subsequent beam instability are possible outcomes of a breakdown if too much gas is released from the cavity surface. Quantitative data of gas released by breakdowns are provided for copper (milled Cu-OFE, as-received and heat-treated), and molybdenum. These data are produced in a DC spark system based on a capacitance charged at fixed energy, and will serve as a reference for the vacuum design of the CLIC accelerating structures.

  6. Dc's blog | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTIONRobertsdale, Alabama (UtilityInstruments Inc JumpIowa:Minnesota:Daylighting JumpDc's blog Home >

  7. DC Survey 2013 | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouthReport for the t-) S/,,5 'a CConversion |National Laser UserDC

  8. Washington DC | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (Utility Company)Idaho)Vossloh Kiepe JumpWarana Group ofDC Home Linked

  9. How to print from a library computer

    E-Print Network [OSTI]

    Royer, Dana

    to ANY library public printer ­ you will choose which printer to pick it upHow to print from a library computer How To Print 1. Make sure you are logged have selected all the op?ons you want, click Print. 6. Go to any library

  10. A Reachability-Based Method for Large-Signal Behavior Verification of DC-DC Converters

    E-Print Network [OSTI]

    Liberzon, Daniel

    -loop, large-signal system behavior verification, and iv) switching detail modeling. In open-loop, large´inguez-Garc´ia, Member, IEEE Abstract--A method for large-signal behavior verification of power electronics DC behavior verification, lengthy time-domain simula- tions are conducted to analyze the system response

  11. Vehicle Technologies Office Merit Review 2014: DC Fast Charging...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing Presentation given by Idaho National Laboratory at 2014...

  12. INL Efficiency and Security Testing of EVSE, DC Fast Chargers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    INL Efficiency and Security Testing of EVSE, DC Fast Chargers, and Wireless Charging Systems May 14, 2013 Project ID VSS096 2013 DOE Vehicle Technologies Program Annual Merit...

  13. Washington DC Reliability Requirements and the Need to Operate...

    Energy Savers [EERE]

    DC Reliability Requirements and the Need to Operate Mirant's Potomac River Generation Station to Support Local Area Reliability (Oak Ridge National Laboratory 2005)...

  14. DC Resistivity Survey (Schlumberger Array) At Raft River Geothermal...

    Open Energy Info (EERE)

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: DC Resistivity Survey (Schlumberger Array) At Raft River Geothermal Area (1974-1975) Exploration...

  15. INL Efficiency and Security Testing of EVSE, DC Fast Chargers...

    Broader source: Energy.gov (indexed) [DOE]

    Testing to support Code & Standards Vehicle Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing Vehicle...

  16. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. apearravt028boan2010...

  17. DC Resistivity Survey (Wenner Array) At Mt Princeton Hot Springs...

    Open Energy Info (EERE)

    2008 - 2010 Usefulness useful DOE-funding Unknown Exploration Basis Determination of groundwater flux patterns Notes Researchers measured DC resistivity and produced 12 resistivity...

  18. DESIGN AND PERFORMANCE OF PEP DC POWER SYSTEMS

    E-Print Network [OSTI]

    Jackson, T.

    2010-01-01

    DC supplies, with no switchgear interposed between the DCthe only transformers and switchgear in the system, and theycost of transformers and switchgear is eliminated from the

  19. Design and analysis of a zero-voltage switching scheme for a dc- to-dc converter 

    E-Print Network [OSTI]

    Arun, G.

    1992-01-01

    DESIGN AND ANALYSIS OF A ZERO-VOLTAGE SSVITCHING SCFIE'. tIE FOR A DC-TO-DC CONVERTER A Thesis by G. ARUN Submitted to the Office of Graduate Studies of Texas ARM 1. niversity in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1992 Major Subject: Electrical Engineering DESIGN AND ANALYSIS OE A ZERO-VOLTAGE SWITCHING SCHEME I'OR A DC-TO-DC CONVERTER A Thesis by G. AR(tN Approved as to style and content by: P. Enjeti (Chair of Cornrnitteel C...

  20. Idea Generation 3D printing

    E-Print Network [OSTI]

    Papadopouli, Maria

    is a national research centre focused on smart electrical grid and energy storage technology, which Centre micro and nanoscale 15 Taking 3D printing to the nanoscale 18 Fighting cancer with a "lab of wireless speeds 24 Winners of erc grants electrical transportation 25 The power of electrical roads 27

  1. Printed in: ASCE Engineering Mechanics

    E-Print Network [OSTI]

    Printed in: ASCE Engineering Mechanics 1977, pp. 295-297. Pore pressure effeats in ine~hich increments of fluid pore-pressure enter constitutive relations for elastic and inelastic response. The former constrained) equilibrium states has the form, gen- eralized from [1,2] to include pore-pressure effects, d

  2. High Voltage DC Transmission 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    1 High Voltage DC Transmission 1.0 Introduction HVDC has been applied in electric power systems Supplier: ABB Railroa d DC Tie USA - Mission, TX 26°1001N9 8°1925W USA - Mission, TX 26°1001N9 8°1925W 21

  3. DC Optimal Power Flow: Uniqueness and Chee Wei Tan

    E-Print Network [OSTI]

    Tan, Chee Wei

    the minimization of power transmission loss in DC-OPF and char- acterize the uniqueness of its solutions. This hasDC Optimal Power Flow: Uniqueness and Algorithms Chee Wei TanÝ , Desmond W. H. Cai£ and Xin LouÝ Ý and transmission loss in a power net- work subject to physical constraints governed by Kirchhoff's and Ohm's law [1

  4. A 3D Magnetic Force Manipulator DC Prototype

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    A 3D Magnetic Force Manipulator DC Prototype Leandra Vicci Microelectronic Systems Laboratory optical field intensities which interact strongly with many materials and may produce undesired side;Leandra Vicci A 3D Magnetic Force Manipulator DC Prototype 17 October 2001 1 Conceptual design

  5. Read-out electronics for DC squid magnetic measurements

    DOE Patents [OSTI]

    Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

    2002-01-01

    Read-out electronics for DC SQUID sensor systems, the read-out electronics incorporating low Johnson noise radio-frequency flux-locked loop circuitry and digital signal processing algorithms in order to improve upon the prior art by a factor of at least ten, thereby alleviating problems caused by magnetic interference when operating DC SQUID sensor systems in magnetically unshielded environments.

  6. Peter M. Vallone AAFS Washington, D.C.

    E-Print Network [OSTI]

    Peter M. Vallone AAFS Washington, D.C. February 23, 2008 http://www.cstl.nist.gov/biotech available for the purpose. Our publications and presentations are made available at: http://www.cstl.nist.gov/biotech/strbase/NISTpub.htm #12;Peter M. Vallone AAFS Washington, D.C. February 23, 2008 http://www.cstl.nist.gov/biotech

  7. Tutorial, GECCO'05, Washington D.C. Fitness Approximation

    E-Print Network [OSTI]

    Yang, Shengxiang

    1 Tutorial, GECCO'05, Washington D.C. Fitness Approximation in Evolutionary Computation Yaochu Jin Honda Research Institute Europe Khaled Rasheed University of Georgia Tutorial, GECCO'05, Washington D expensive fitness evaluations Tutorial, GECCO'05, Washington D.C. Fitness Approximation Methods · Problem

  8. National Small Business Federal Contracting Summit-DC Fall Conference

    Broader source: Energy.gov [DOE]

    The 2014 National Small Business Federal Contracting Summit - DC Fall Conference is presented jointly by the National Association of Small Business Contractors (the Supplier Council of The American Small Business Chamber of Commerce) and the U.S. Women's Chamber of Commerce in Washington DC.

  9. Dynamic microscopic theory of fusion using DC-TDHF

    SciTech Connect (OSTI)

    Umar, A. S.; Oberacker, V. E.; Keser, R.; Maruhn, J. A.; Reinhard, P.-G.

    2012-10-20

    The density-constrained time-dependent Hartree-Fock (DC-TDHF) theory is a fully microscopic approach for calculating heavy-ion interaction potentials and fusion cross sections below and above the fusion barrier. We discuss recent applications of DC-TDHF method to fusion of light and heavy systems.

  10. Processing a printed wiring board by single bath electrodeposition

    DOE Patents [OSTI]

    Meltzer, Michael P. (Oakland, CA); Steffani, Christopher P. (Livermore, CA); Gonfiotti, Ray A. (Livermore, CA)

    2010-12-07

    A method of processing a printed wiring board. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from a bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  11. Processing A Printed Wiring Board By Single Bath Electrodeposition

    DOE Patents [OSTI]

    Meltzer, Michael P. (Oakland, CA); Steffani, Christopher P. (Livermore, CA); Gonfiotti, Ray A. (Livermore, CA)

    2003-04-15

    A method of processing a printed wiring board by single bath electrodeposition. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from the bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  12. Historical Material Analysis of DC745U Pressure Pads

    SciTech Connect (OSTI)

    Ortiz-Acosta, Denisse [Los Alamos National Laboratory

    2012-07-30

    As part of the Enhance Surveillance mission, it is the goal to provide suitable lifetime assessment of stockpile materials. This report is an accumulation of historical publication on the DC745U material and their findings. It is the intention that the B61 LEP program uses this collection of data to further develop their understanding and potential areas of study. DC745U is a commercially available silicone elastomer consisting of dimethyl, methyl-phenyl, and methyl-vinyl siloxane repeat units. Originally, this material was manufactured by Dow Corning as Silastic{reg_sign} DC745U at their manufacturing facility in Kendallville, IN. Recently, Dow Corning shifted this material to the Xiameter{reg_sign} brand product line. Currently, DC745U is available through Xiameter{reg_sign} or Dow Corning's distributor R. D. Abbott Company. DC745U is cured using 0.5 wt% vinyl-specific peroxide curing agent known as Luperox 101 or Varox DBPH-50. This silicone elastomer is used in numerous parts, including two major components (outer pressure pads and aft cap support) in the W80 and as pressure pads on the B61. DC745U is a proprietary formulation, thus Dow Corning provides limited information on its composition and properties. Based on past experience with Dow Corning, DC745U is at risk of formulation changes without notification to the costumer. A formulation change for DC745U may have a significant impact because the network structure is a key variable in determining material properties. The purpose of this report is to provide an overview of historical DC745U studies and identify gaps that need to be addressed in future work. Some of the previous studies include the following: 1. Spectroscopic characterization of raw gum stock. 2. Spectroscopic, thermal, and mechanical studies on cured DC745U. 3. Nuclear Magnetic Resonance (NMR) and solvent swelling studies on DC745U with different crosslink densities. 4. NMR, solvent swelling, thermal, and mechanical studies on thermally aged DC745U. 5. NMR, solvent swelling, thermal, and mechanical studies on radiolytically aged DC745U. Each area is reviewed and further work is suggested to improve our understanding of DC745U for systems engineering, surveillance, aging assessments, and lifetime assessment.

  13. 1668 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 27, NO. 4, APRIL 2012 55-kW Variable 3X DC-DC Converter for Plug-in

    E-Print Network [OSTI]

    Tolbert, Leon M.

    vehicle (HEV) traction drives. The boost converter used in commercial HEVs meets with obstacles when is shown in Fig. 1. In this system, the dc-dc converter boosts the battery voltage from 244 V to three op series-parallel HEV. speed and power demand of the vehicle. In this traditional dc- dc boost converter

  14. New leading/trailing edge modulation strategies for two-stage AC/DC PFC adapters to reduce DC-link capacitor ripple current 

    E-Print Network [OSTI]

    Sun, Jing

    2007-09-17

    PFC stage and trailing edge modulation for the second DC/DC converter stage can significantly reduce the ripple current and ripple voltage of the DC-link capacitor. Thus, a smaller DC-link capacitance can be used, lowering the cost and size of the AC...

  15. Development of a Novel Bi-Directional Isolated Multiple-Input DC-DC Converter

    SciTech Connect (OSTI)

    Li, H.

    2005-10-24

    There is vital need for a compact, lightweight, and efficient energy-storage system that is both affordable and has an acceptable cycle life for the large-scale production of electric vehicles (EVs) and hybrid electric vehicles (HEVs). Most of the current research employs a battery-storage unit (BU) combined with a fuel cell (FC) stack in order to achieve the operating voltage-current point of maximum efficiency for the FC system. A system block diagram is shown in Fig.1.1. In such a conventional arrangement, the battery is sized to deliver the difference between the energy required by the traction drive and the energy supplied by the FC system. Energy requirements can increase depending on the drive cycle over which the vehicle is expected to operate. Peak-power transients result in an increase of losses and elevated temperatures which result in a decrease in the lifetime of the battery. This research will propose a novel two-input direct current (dc) dc to dc converter to interface an additional energy-storage element, an ultracapacitor (UC), which is shown in Fig.1.2. It will assist the battery during transients to reduce the peak-power requirements of the battery.

  16. Abstract--A design method for digital controller of PWM DC-DC converters was developed, tested by simulations and

    E-Print Network [OSTI]

    domain transformation and discretization. A digital PID controller for a Buck type converter domain and the sampled data domain (via the various transformation algorithms), a digital compensatorAbstract-- A design method for digital controller of PWM DC-DC converters was developed, tested

  17. Phase-Shifted Full Bridge DC-DC Converter with Energy Recovery Clamp and Reduced Circulating Current

    E-Print Network [OSTI]

    Phase-Shifted Full Bridge DC-DC Converter with Energy Recovery Clamp and Reduced Circulating@aei.com Abstract - This paper introduces a full bridge converter with reduced circulating current and a reduction bridge converter operating at 32 kHz switching frequency. Losses and efficiency of the experimental

  18. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    AC vs. DC distribution: A loss comparison. Transmission andof a DC microgrid for residential houses. In Transmission &DC mainly because it enabled central generation and efficient long-distance power transmission.

  19. Application to Export Electric Energy OE Docket No. EA-351 DC...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 DC Energy Dakota, LLC Application to Export Electric Energy OE Docket No. EA-351 DC Energy Dakota, LLC Application from DC Energy Dakota, LLC to export electric energy to Canada...

  20. Printed decorative solar panels could become part of our homes...

    Open Energy Info (EERE)

    homes and offices Posted: 10 Mar 2015 - 13:37 by Dc Dc Lightweight 'solar cloth' photovoltaics have flexible future Posted: 13 Jan 2015 - 11:03 by Dc 1 of 5 Groups Menu...

  1. Organic and Printed Electronics for Biological Microfluidic Applications

    E-Print Network [OSTI]

    Jagannathan, Lakshmi

    2012-01-01

    low-cost and flexible substrates. Printed electronics alsoflexible and plastic substrates Table 1. Comparison between conventional processing and processing using printed electronics.flexible substrates. Specifically, for biological applications, the ability of printed electronics

  2. Organic and Printed Electronics for Biological Microfluidic Applications

    E-Print Network [OSTI]

    Jagannathan, Lakshmi

    2012-01-01

    and Q. Zhang, “Printed electronics for low-cost electronicUltra-Low-Cost Printed Electronics,” Ph.D. dissertation,capability of printed electronics to make important aspects

  3. 3D Printed and Semiconductor Technology 'Mash-up' | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to 60 in under five seconds. Concept to reality in just six weeks. Photo Gallery: 3D Printing Brings Classic Shelby Cobra to Life 3-D Printed Inverter Novel 3-D Printed...

  4. We Have a Winner - DC High School Regional Science Bowl Competition...

    Energy Savers [EERE]

    We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday...

  5. 3D Printing of Scintillating Materials

    E-Print Network [OSTI]

    Y. Mishnayot; M. Layani; I. Cooperstein; S. Magdassi; G. Ron

    2014-06-15

    We demonstrate, for the first time, the applicability of 3D printing technique to the manufacture of scintillation detectors. We report of a formulation, usable in stereolithographic printing, that exhibits scintillation efficiency on the order of 30\\% of that of commercial polystyrene based scintillators. We discuss the applicability of these techniques and propose future enhancements that will allow tailoring the printed scintillation detectors to various application.

  6. 3D Printing of Scintillating Materials

    E-Print Network [OSTI]

    Mishnayot, Y; Cooperstein, I; Magdassi, S; Ron, G

    2014-01-01

    We demonstrate, for the first time, the applicability of 3D printing technique to the manufacture of scintillation detectors. We report of a formulation, usable in stereolithographic printing, that exhibits scintillation efficiency on the order of 30\\% of that of commercial polystyrene based scintillators. We discuss the applicability of these techniques and propose future enhancements that will allow tailoring the printed scintillation detectors to various application.

  7. turn over N Wireless printing allows you to print documents from your laptop

    E-Print Network [OSTI]

    turn over N Wireless printing allows you to print documents from your laptop to selected campus printers while connected to the U ofT campus wireless network.You will need to set up one (or more) of the available printers on your computer.You retrieve your printout at Wireless printing costs the same

  8. Improved e-Jet Printing -TFOT Improved e-Jet Printing

    E-Print Network [OSTI]

    Rogers, John A.

    Improved e-Jet Printing - TFOT Home Sections News Articles Forums About Us Improved e-Jet Printing at the University of Illinois have developed a technology that provides higher resolution and more versatility in e-jet printing. As opposed to conventional ink-jet printers, where heat or mechanical vibrations are used

  9. Heat sinking for printed circuitry

    DOE Patents [OSTI]

    Wilson, S.K.; Richardson, G.; Pinkerton, A.L.

    1984-09-11

    A flat pak or other solid-state device mounted on a printed circuit board directly over a hole extends therethrough so that the bottom of the pak or device extends beyond the bottom of the circuit board. A heat sink disposed beneath the circuit board contacts the bottom of the pak or device and provides direct heat sinking thereto. Pressure may be applied to the top of the pak or device to assure good mechanical and thermal contact with the heat sink.

  10. GRADUATE PHD THESIS PROPOSAL APPLICATION Please Print

    E-Print Network [OSTI]

    GRADUATE PHD THESIS PROPOSAL APPLICATION ··Please Print·· Name:__________________________________________ Today's date:_________________ I request approval of the attached thesis topic: Title: ____________________________ Alternate room: ___________________________ Thesis Advisor

  11. When printing a copy of any digitized...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Printed March 1979 A USER'S MANUAL FOR THE COMPUTER CODE PAREP * Timothy M. Leonard Civil Engineering Research Facility University of New Mexico Albuquerque, NM Abstract This...

  12. Implementing the DC Mode in Cosmological Simulations with Supercomoving Variables

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gnedin, Nickolay Y; Kravtsov, Andrey V; Rudd, Douglas H

    2011-06-02

    As emphasized by previous studies, proper treatment of the density fluctuation on the fundamental scale of a cosmological simulation volume - the 'DC mode' - is critical for accurate modeling of spatial correlations on scales ~> 10% of simulation box size. We provide further illustration of the effects of the DC mode on the abundance of halos in small boxes and show that it is straightforward to incorporate this mode in cosmological codes that use the 'supercomoving' variables. The equations governing evolution of dark matter and baryons recast with these variables are particularly simple and include the expansion factor, andmore »hence the effect of the DC mode, explicitly only in the Poisson equation.« less

  13. Transfer Printed Microcells with Micro-Optic Concentrators for...

    Office of Scientific and Technical Information (OSTI)

    Printed Microcells with Micro-Optic Concentrators for Low Cost, High Performance Photovoltaic Modules Citation Details In-Document Search Title: Transfer Printed Microcells with...

  14. 3D Printing in 30 Seconds | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3D Printing in 30 Seconds 3D Printing in 30 Seconds Addthis An error occurred. Unable to execute Javascript. Duration :38 Topic Science & Technology...

  15. Dispenser Printed Zinc Microbattery with an Ionic Liquid Gel Electrolyte

    E-Print Network [OSTI]

    Ho, Christine Chihfan

    2010-01-01

    using dispenser printing including (a) 3D polymer molds, (b)using dispenser printing including (a) 3D polymer molds, (b)

  16. Thermoelectric DC conductivities and Stokes flows on black hole horizons

    E-Print Network [OSTI]

    Elliot Banks; Aristomenis Donos; Jerome P. Gauntlett

    2015-07-15

    We consider a general class of electrically charged black holes of Einstein-Maxwell-scalar theory that are holographically dual to conformal field theories at finite charge density which break translation invariance explicitly. We examine the linearised perturbations about the solutions that are associated with the thermoelectric DC conductivity. We show that there is a decoupled sector at the black hole horizon which must solve generalised Stokes equations for a charged fluid. By solving these equations we can obtain the DC conductivity of the dual field theory. For one-dimensional lattices we solve the fluid equations to obtain closed form expressions for the DC conductivity in terms of the solution at the black hole horizon. We also determine the leading order DC conductivity for lattices that can be expanded as a perturbative series about translationally invariant solutions.

  17. Radiofrequency amplifier based on a dc superconducting quantum interference device

    DOE Patents [OSTI]

    Hilbert, C.; Martinis, J.M.; Clarke, J.

    1984-04-27

    A low noise radiofrequency amplifer, using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID and an input coil are maintained at superconductivity temperatures in a superconducting shield, with the input coil inductively coupled to the superconducting ring of the dc SQUID. A radiofrequency signal from outside the shield is applied to the input coil, and an amplified radiofrequency signal is developed across the dc SQUID ring and transmitted to exteriorly of the shield. A power gain of 19.5 +- 0.5 dB has been achieved with a noise temperature of 1.0 +- 0.4 K at a frequency of 100 MHz.

  18. National Science Bowl Brings Best and Brightest to DC

    Broader source: Energy.gov [DOE]

    The National Science Bowl Finals in Washington D.C. April 27 to 30 pit 113 high and middle school teams against one another answering questions Jeopardy-style about biology, chemistry, earth science, physics, astronomy, and math.

  19. Thermoelectric DC conductivities and Stokes flows on black hole horizons

    E-Print Network [OSTI]

    Banks, Elliot; Gauntlett, Jerome P

    2015-01-01

    We consider a general class of electrically charged black holes of Einstein-Maxwell-scalar theory that are holographically dual to conformal field theories at finite charge density which break translation invariance explicitly. We examine the linearised perturbations about the solutions that are associated with the thermoelectric DC conductivity. We show that there is a decoupled sector at the black hole horizon which must solve generalised Stokes equations for a charged fluid. By solving these equations we can obtain the DC conductivity of the dual field theory. For one-dimensional lattices we solve the fluid equations to obtain closed form expressions for the DC conductivity in terms of the solution at the black hole horizon. We also determine the leading order DC conductivity for lattices that can be expanded as a perturbative series about translationally invariant solutions.

  20. Thermoelectric DC conductivities with momentum dissipation from higher derivative gravity

    E-Print Network [OSTI]

    Long Cheng; Xian-Hui Ge; Zu-Yao Sun

    2015-04-28

    We present a mechanism of momentum relaxation in higher derivative gravity by adding linear scalar fields to the Gauss-Bonnet theory. We analytically computed all of the DC thermoelectric conductivities in this theory by adopting the method given by Donos and Gauntlett in [arXiv:1406.4742]. The results show that the DC electric conductivity is not a monotonic function of the effective impurity parameter $\\beta$: in the small $\\beta$ limit, the DC conductivity is dominated by the coherent phase, while for larger $\\beta$, pair creation contribution to the conductivity becomes dominant, signaling an incoherent phase. In addition, the DC heat conductivity is found independent of the Gauss-Bonnet coupling constant.

  1. Thermoelectric DC conductivities and Stokes flows on black hole horizons

    E-Print Network [OSTI]

    Elliot Banks; Aristomenis Donos; Jerome P. Gauntlett

    2015-10-11

    We consider a general class of electrically charged black holes of Einstein-Maxwell-scalar theory that are holographically dual to conformal field theories at finite charge density which break translation invariance explicitly. We examine the linearised perturbations about the solutions that are associated with the thermoelectric DC conductivity. We show that there is a decoupled sector at the black hole horizon which must solve generalised Stokes equations for a charged fluid. By solving these equations we can obtain the DC conductivity of the dual field theory. For Q-lattices and one-dimensional lattices we solve the fluid equations to obtain closed form expressions for the DC conductivity in terms of the solution at the black hole horizon. We also determine the leading order DC conductivity for lattices that can be expanded as a perturbative series about translationally invariant solutions.

  2. A Multiphase, Modular, Bidirectional, Triple-Voltage DC-DC Converter Power Systems

    SciTech Connect (OSTI)

    Su, Gui-Jia [ORNL; Tang, Lixin [ORNL

    2008-01-01

    Electrical power systems in future hybrid and fuel cell vehicles may employ three voltage [14 V, 42 V, and high voltage (HV)] nets. These will be necessary to accommodate existing 14-V loads as well as efficiently handle new heavy loads at the 42-V net and a traction drive on the HV bus. A low-cost DC-DC converter was proposed for connecting the three voltage nets. It minimizes the number of switches and their associated gate driver components by using two half-bridges and a high-frequency transformer. Another salient feature is that the half bridge on the 42-V bus is also utilized to provide the 14-V bus by operating at duty ratios around an atypical value of 1/3. Moreover, it makes use of the parasitic capacitance of the switches and the transformer leakage inductance for soft switching. The use of half bridges makes the topology well suited for interleaved multiphase modular configurations as a means to increase the power level because the capacitor legs can be shared. This paper presents simulation and experimental results on an interleaved two-phase arrangement rated at 4.5 kW. Also discussed are the benefits of operating with an atypical duty ratio on the transformer and a preferred multiphase configuration to minimize capacitor ripple currents.

  3. Content-adaptive Lenticular Prints James Tompkin

    E-Print Network [OSTI]

    Kautz, Jan

    to fixed-size lens arrays. We demonstrate our tech- nique using rendered simulations and by 3D printing.1 [Computer Graphics]: Hardware Architec- ture --Three-dimensional displays; Keywords: Lenticular displays, 3D printing. Links: DL PDF WEB 1 Introduction Displays that provide the illusion of three dimensions have

  4. Aalborg Universitet Power flow analysis for droop controlled LV hybrid AC-DC microgrids with virtual

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Power flow analysis for droop controlled LV hybrid AC-DC microgrids controlled LV hybrid AC-DC microgrids with virtual impedance. In Proceedings of the IEEE Power & Energy Interlinking converter PV WT IBS DC microgrid DC microgrid AC microgrid AC Load Figure 1. Structure

  5. Switching power converter Figure 1(a): Switching DC-DC converter with analog voltage-mode control

    E-Print Network [OSTI]

    + ­ RC L Vg 1 2 i + v _ Vref + _ Gc(s) VM = 1 PWM u c Switching power converter H v dTs H = 1 design of digital compensators. I. INTRODUCTION Discrete-time modeling of dc-dc switching converters has IEEE. #12;+ ­ R C L Vg 1 2 i + v _ Vref + _ Gc(z) VM = 1 DPWM u c Switching power converter H v dTs H

  6. A High Efficiency DC-DC Converter Topology Suitable for Distributed Large Commercial and Utility Scale PV Systems

    SciTech Connect (OSTI)

    Mohammed S. Agamy; Maja Harfman-Todorovic; Ahmed Elasser; Robert L. Steigerwald; Juan A. Sabate; Song Chi; Adam J. McCann; Li Zhang; Frank Mueller

    2012-09-01

    In this paper a DC-DC power converter for distributed photovoltaic plant architectures is presented. The proposed converter has the advantages of simplicity, high efficiency, and low cost. High efficiency is achieved by having a portion of the input PV power directly fed forward to the output without being processed by the converter. The operation of this converter also allows for a simplified maximum power point tracker design using fewer measurements

  7. Printed circuit dispersive transmission line

    DOE Patents [OSTI]

    Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

    1991-08-27

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

  8. Printed circuit dispersive transmission line

    DOE Patents [OSTI]

    Ikezi, Hiroyuki (Rancho Santa Fe, CA); Lin-Liu, Yuh-Ren (San Diego, CA); DeGrassie, John S. (Encinitas, CA)

    1991-01-01

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other.

  9. CONFIDENTIAL INDICATOR/NO PRINT INDICATOR Georgia Institute of Technology

    E-Print Network [OSTI]

    Li, Mo

    employee who has legitimate access to view your academic records will be given a visual reminder that your will not print in the on-line look-up (lu) or in the printed copy of the Campus Directory. Your name the printing of your name and any associated information in the on-line or printed directory. However

  10. RESEARCH ARTICLE Strengthening of 3D Printed Fused

    E-Print Network [OSTI]

    Haller, Gary L.

    RESEARCH ARTICLE Strengthening of 3D Printed Fused Deposition Manufactured Parts Using the Fill as examples of 3D printed parts used in real-world applications. Introduction While the quality of additive to the wider-spread implementation of 3D- printed components continues to be the limited strength of printed

  11. CAN 3D PRINTING REVOLUTIONIZE GLOBAL MANUFACTURING? A DELPHI STUDY

    E-Print Network [OSTI]

    CAN 3D PRINTING REVOLUTIONIZE GLOBAL MANUFACTURING? A DELPHI STUDY ­ Master Thesis Proposal ­ BACKGROUND 3D printing (or additive manufacturing) is not an entirely new phenomenon. First introduced and president of Foxconn, calls it a nice "gimmick" and even Nick Allen, founder of 3D printing company 3D Print

  12. Aluminum plasmonic metamaterials for structural color printing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Fei; Gao, Jie; Stan, Liliana; Rosenmann, Daniel; Czaplewski, David; Yang, Xiaodong

    2015-05-26

    We report a structural color printing platform based on aluminum plasmonic metamaterials supporting near perfect light absorption and narrow-band spectral response tunable across the visible spectrum to realize high-resolution, angle-insensitive color printing with high color purity and saturation. Additionally, the fabricated metamaterials can be protected by a transparent polymer thin layer for ambient use with further improved color performance. The demonstrated structural color printing with aluminum plasmonic metamaterials offers great potential for relevant applications such as security marking and information storage.

  13. Materials with low DC magnetic susceptibility for sensitive magnetic measurements

    E-Print Network [OSTI]

    Khatiwada, Rakshya; Kendrick, Rachel; Khosravi, Marjan; Peters, Michael; Smith, Erick; Snow, Mike

    2015-01-01

    Materials with very low DC magnetic susceptibility have many scientific applications. To our knowledge however, relatively little research has been conducted with the goal to produce a totally nonmagnetic material. This phrase in our case means after spatially averaging over macroscopic volumes, it possesses an average zero DC magnetic susceptibility. We report measurements of the DC magnetic susceptibility of three different types of nonmagnetic materials at room temperature: (I) solutions of paramagnetic salts and diamagnetic liquids, (II) liquid gallium-indium alloys and (III) pressed powder mixtures of tungsten and bismuth. The lowest measured magnetic susceptibility among these candidate materials is in the order of 10^-9 cgs volume susceptibility units, about two orders of magnitude smaller than distilled water. In all cases, the measured concentration dependence of the magnetic susceptibility is consistent with that expected for the weighted sum of the susceptibilities of the separate components within...

  14. Print

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits theCommitteeCrystallineReserve | DepartmentFederalPolicymaneras fáciles de

  15. Print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeedingProgram GuidelinesThousandnstx-uMid-AmericaDelegations,

  16. Print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) by Carbon-Rich Matrices inPrincipal Investigatorsmaneras fáciles de usar

  17. Nuclear magnetic resonance experiments with dc SQUID amplifiers

    SciTech Connect (OSTI)

    Heaney, M.B. . Dept. of Physics Lawrence Berkeley Lab., CA )

    1990-11-01

    The development and fabrication of dc SQUIDs (Superconducting QUantum Interference Devices) with Nb/Al{sub 2}O{sub 3}/Nb Josephson junctions is described. A theory of the dc SQUID as a radio-frequency amplifier is presented, with an optimization strategy that accounts for the loading and noise contributions of the postamplifier and maximizes the signal-to-noise ratio of the total system. The high sensitivity of the dc SQUID is extended to high field NMR. A dc SQUID is used as a tuned radio-frequency amplifier to detect pulsed nuclear magnetic resonance at 32 MHz from a metal film in a 3.5 Tesla static field. A total system noise temperature of 11 K has been achieved, at a bath temperature of 4.2 K. The minimum number of nuclear Bohr magnetons observable from a free precession signal after a single pulse is about 2 {times} 10{sup 17} in a bandwidth of 25 kHz. In a separate experiment, a dc SQUID is used as a rf amplifier in a NQR experiment to observe a new resonance response mechanism. The net electric polarization of a NaClO{sub 3} crystal due to the precessing electric quadrupole moments of the Cl nuclei is detected at 30 MHz. The sensitivity of NMR and NQR spectrometers using dc SQUID amplifiers is compared to the sensitivity of spectrometers using conventional rf amplifiers. A SQUID-based spectrometer has a voltage sensitivity which is comparable to the best achieved by a FET-based spectrometer, at these temperatures and operating frequencies.

  18. Graphite electrode DC arc furnace. Innovative technology summary report

    SciTech Connect (OSTI)

    1999-05-01

    The Graphite Electrode DC Arc Furnace (DC Arc) is a high-temperature thermal process, which has been adapted from a commercial technology, for the treatment of mixed waste. A DC Arc Furnace heats waste to a temperature such that the waste is converted into a molten form that cools into a stable glassy and/or crystalline waste form. Hazardous organics are destroyed through combustion or pyrolysis during the process and the majority of the hazardous metals and radioactive components are incorporated in the molten phase. The DC Arc Furnace chamber temperature is approximately 593--704 C and melt temperatures are as high as 1,500 C. The DC Arc system has an air pollution control system (APCS) to remove particulate and volatiles from the offgas. The advantage of the DC Arc is that it is a single, high-temperature thermal process that minimizes the need for multiple treatment systems and for extensive sorting/segregating of large volumes of waste. The DC Arc has the potential to treat a wide range of wastes, minimize the need for sorting, reduce the final waste volumes, produce a leach resistant waste form, and destroy organic contaminants. Although the DC arc plasma furnace exhibits great promise for treating the types of mixed waste that are commonly present at many DOE sites, several data and technology deficiencies were identified by the Mixed Waste Focus Area (MWFA) regarding this thermal waste processing technique. The technology deficiencies that have been addressed by the current studies include: establishing the partitioning behavior of radionuclides, surrogates, and hazardous metals among the product streams (metal, slag, and offgas) as a function of operating parameters, including melt temperature, plenum atmosphere, organic loading, chloride concentration, and particle size; demonstrating the efficacy of waste product removal systems for slag and metal phases; determining component durability through test runs of extended duration, evaluating the effect of feed composition variations on process operating conditions and slag product performance; and collecting mass balance and operating data to support equipment and instrument design.

  19. Inkjet printed electronics using copper nanoparticle ink

    E-Print Network [OSTI]

    Kang, Jin Sung; Kim, Hak Sung; Ryu, Jongeun; Thomas Hahn, H.; Jang, Seonhee; Joung, Jae Woo

    2010-01-01

    diagram of drop on demand copper nanoparticle inkjet printerdemand inkjet printing system 2 Experimental details 2.1 Specimen preparation The conductive coppercopper nanoparticles at room temperature. Using drop on demand

  20. [COMMITTEE PRINT] 113TH CONGRESS REPORT

    E-Print Network [OSTI]

    Energy Programs: 00 00 Energy Efficiency and Renewable Energy ................................. 00 0087­057 [COMMITTEE PRINT] 113TH CONGRESS REPORT " !HOUSE OF REPRESENTATIVES2d Session 113­ ENERGY ............................................... 00 00 Policy and Administration .......................................................... 00 00

  1. E-print Network : User Account

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Search | My Selections (0) | | | | Alerts | E-print Network Create User Account User Name: Email Address: I want to: Always receive emails Receive emails if there are new...

  2. printed on recycled paper INDUSTRIAL ASSESSMENT CENTER

    E-Print Network [OSTI]

    printed on recycled paper INDUSTRIAL ASSESSMENT CENTER ENERGY EFFICIENCY, POLLUTION PREVENTION, AND PRODUCTIVITY IMPROVEMENT ASSISTANCE FOR INDUSTRY A U.S. DEPARTMENT OF ENERGY SPONSORED PROGRAM INDUSTRIAL STATE UNIVERSITY Industrial Assessment Center Department of Mechanical Engineering Fort Collins

  3. Digital imaging tracing technology for print media 

    E-Print Network [OSTI]

    Milne, Stewart William

    1997-01-01

    This thesis examines and analyzes the existing state of digital technology use in print media and the attitudes of those using the technology to develop a technology that would help prevent the unethical manipulation of ...

  4. ETD Signature Form Print Name____________________________________________________________ ID # 800_____________________

    E-Print Network [OSTI]

    Jiang, Jiancheng

    April 2013 ETD Signature Form Print Name Charlotte ETD archives with the following status (choose one): ___ 1. Worldwide Access following the date in electronic format (ETD) and agree to abide by the statements above regarding the access option selected

  5. Fast Compact Laser Shutter Using a Direct Current Motor and 3D Printing

    E-Print Network [OSTI]

    Zhang, Grace H; Kawasaki, Akio; Vuleti?, Vladan

    2015-01-01

    We present a mechanical laser shutter design that utilizes a DC electric motor to rotate a blade which blocks and unblocks a light beam. The blade and the main body of the shutter are modeled with computer aided design (CAD) and are produced by 3D printing. Rubber flaps are used to limit the blade's range of motion, reducing vibrations and preventing undesirable blade oscillations. At its nominal operating voltage, the shutter achieves a switching speed of (1.22 $\\pm$ 0.02) m/s with 1 ms activation delay and 10 $\\mu$s jitter in its timing performance. The shutter design is simple, easy to replicate, and highly reliable, showing no failure or degradation in performance over more than $10^8$ cycles.

  6. Printed Name: Page 1 of 6

    E-Print Network [OSTI]

    Walba, David

    print your name on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6Printed Name: Page 1 of 6 CHEM 3311-100, Fall 2013 Professor Walba First Hour Exam September 24: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  7. Printed Name: Page 1 of 7

    E-Print Network [OSTI]

    Walba, David

    print your name on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6Printed Name: Page 1 of 7 CHEM 3311-100, Fall 2013 Professor Walba Second Hour Exam October 22: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  8. Printed Name: Page 1 of 8

    E-Print Network [OSTI]

    Walba, David

    print your name on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6Printed Name: Page 1 of 8 CHEM 3311-100, Fall 2013 Professor Walba Third Hour Exam November 19: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  9. Printed Name: Page 1 of 9

    E-Print Network [OSTI]

    Walba, David

    print your name on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6Printed Name: Page 1 of 9 CHEM 3311 (300), Fall 2014 Professor Walba Third Hour Exam November 18: _____________________________ Recitation day and time: __________________________ This is a closed-book exam. The use of notes, calculators

  10. Inductorless DC-AC Cascaded H-bridge Multilevel Boost Inverter for Electric/Hybrid Electric Vehicle

    E-Print Network [OSTI]

    Tolbert, Leon M.

    - DC boost converter to boost the battery voltage for a traditional 3-phase inverter. The present HEV continuous power rating. Currently available power inverter systems for HEVs use a DC-DC boost converter power, the DC-DC boost converter is not needed and the battery voltage will be directly applied

  11. Characterization of the PvdS-regulated promoter motif in Pseudomonas syringae pv. tomato DC3000 reveals

    E-Print Network [OSTI]

    Myers, Chris

    Characterization of the PvdS-regulated promoter motif in Pseudomonas syringae pv. tomato DC3000S, a group IV sigma factor encoded by Pseudomonas syringae pv. tomato DC3000 (DC3000), a plant pathogen, 2002; Potvin et al., 2008). The model plant pathogen Pseudomonas syringae pv. tomato DC3000 (DC3000

  12. FSU Office of Research Program in Interdisciplinary Computing (PIC) What is 3D printing?

    E-Print Network [OSTI]

    Ronquist, Fredrik

    (PIC) What is 3D printing? 3D printing is a process of making. 3D printing is distinct from traditional machining techniques, which mostly organs, meat, circuit boards and batteries. 3D printing impacts nearly every

  13. High voltage dc--dc converter with dynamic voltage regulation and decoupling during load-generated arcs

    DOE Patents [OSTI]

    Shimer, D.W.; Lange, A.C.

    1995-05-23

    A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules. 5 Figs.

  14. High voltage dc-dc converter with dynamic voltage regulation and decoupling during load-generated arcs

    DOE Patents [OSTI]

    Shimer, Daniel W. (Danville, CA); Lange, Arnold C. (Livermore, CA)

    1995-01-01

    A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules.

  15. Comparative study on copper leaching from waste printed circuit boards by typical ionic liquid acids

    E-Print Network [OSTI]

    Chen, M; Huang, J; Ogunseitan, OA; Zhu, N; Wang, YM

    2015-01-01

    the technology acceptance for dismantling of waste printedL.L. , 2013. A novel dismantling process of waste printed

  16. D.C. Water Resource Research Center Annual Technical Report

    E-Print Network [OSTI]

    strengthening a credible program. Proposals submitted to USGS for the 2002 fiscal year was approved and funding to the success of the Institute. Hence, the goals of 2002 fiscal year will continue to fiscal 2003 while DC water resources information has been significantly delayed because UDC website, which hosts WRRI

  17. DC WRRC Report No. 59 DEVELOPMENT OF FREQUENCY

    E-Print Network [OSTI]

    District of Columbia, University of the

    #12;DC WRRC Report No. 59 DEVELOPMENT OF FREQUENCY FUNCTIONS FOR URBAN NON-POINT SOURCE RISK THE CATHOLIC UNIVERSITY OF AMERICA "This work on which this report is based was supported in part by funds guidance during the entire course of the work. Ms. Cathy Saunders served as research assistant

  18. DC WRRC Report No. 139 BOOK OF ABSTRACTS

    E-Print Network [OSTI]

    District of Columbia, University of the

    Washington, DC 20008 , (202) 274- 6400 #12;Table of Contents Preface i I. Social Sciences 1 II. Ground Water THE FEDERAL WATER POLLUTION CONTROL ACT AMENDMENTS OF 1972 Lieber, H. WRRC Report No. 17 DESCRWWRS: Management 208 of the Clean Water Act was examined. The accomplishments and failures of the 208 plans were

  19. Natural Gas Pipeline Leaks Across Washington, DC Robert B. Jackson,,,

    E-Print Network [OSTI]

    Jackson, Robert B.

    Natural Gas Pipeline Leaks Across Washington, DC Robert B. Jackson,,, * Adrian Down, Nathan G increased in recent decades, but incidents involving natural gas pipelines still cause an average of 17 fatalities and $133 M in property damage annually. Natural gas leaks are also the largest anthropogenic

  20. Winter Break Trip 2014 New York City & Washington DC

    E-Print Network [OSTI]

    Hutcheon, James M.

    Winter Break Trip 2014 New York City & Washington DC Tentative Trip Information December 13/Meadowlands 575 Park Plaza Drive Secaucus, NJ 07094 (201) 422-9480 Hotel is located 3 miles west of New York City for departure at 5pm. · Public Transportation to and from the city o Bus stop is at NW E ST & NW New Jersey Ave

  1. HYBRID DC ACCURATE CHARGE AMPLIFIER FOR LINEAR PIEZOELECTRIC POSITIONING

    E-Print Network [OSTI]

    Fleming, Andrew J.

    the diverse literature in- volving piezoelectric applications is the problem of hysteresis (Adriaens et alHYBRID DC ACCURATE CHARGE AMPLIFIER FOR LINEAR PIEZOELECTRIC POSITIONING Andrew J. Fleming, S. O, Australia 2308 Abstract: Piezoelectric transducers are known to exhibit less hysterisis when driven

  2. DC WRRC Report No. 170 Program ReportAnnual

    E-Print Network [OSTI]

    District of Columbia, University of the

    the people living in the north east of Washington, D.C. and measured the degree of their interest products constitute their endorsement by the United States Government. #12;The project entitled "A Pilot of groundwater inflows requires a knowledge of the hydraulic conductivity or permeability of the sediments

  3. Qualifying Exam Presentation: DC Discharge Studies Using PIC-MCC

    E-Print Network [OSTI]

    Wurtele, Jonathan

    Qualifying Exam Presentation: DC Discharge Studies Using PIC-MCC Jeffrey Hammel Department during cylindrical magnetron sputtering To assess the applicability of the PIC-MCC method for modeling;Presentation Overview I. Introduction II. Theory A. Paschen's Law B. Positive Column III. PIC-MCC Simulations A

  4. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    of DC municipal drinking water quality through random sampling and testing of residential homes that could literally transform the lives of people, especially in the area of water availability. Mr. David. The Institute and the Cooperative Extension Service also added a solar powered weather station to the site

  5. Fuzzy Estimation of DC Motor Winding Currents Innovatia Software

    E-Print Network [OSTI]

    Simon, Dan

    Fuzzy Estimation of DC Motor Winding Currents Dan Simon Innovatia Software 775 Rothrock Circle °ux is rotated in the desired direction of ofuzzy ¯ltering to motor winding current estimation stator windings. an attractive alternative to current estimation using In order to implement an e

  6. DC powerline communication system using a transmission line transformer for high degree of freedom applications

    E-Print Network [OSTI]

    Wade, Eric R. (Eric Randolph), 1978-

    2004-01-01

    A new type of powerline communication is developed to reduce cable requirements for robotic, electromechanical, and vehicular systems. A DC power bus line connecting a DC power supply to motor drives and sensor units is ...

  7. If you reside in WASHINGTON, DC - MD -VA - WV your salary will...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    If you are employed in the WASHINGTON, DC Metropolitan Area (D.C., Baltimore, Northern VA, Eastern WV, and Southern PA) your salary will range from: Pay Band Pay Plan(s) Minimum...

  8. Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on...

    Energy Savers [EERE]

    Moniz's Remarks at CSIS in Washington D.C. on Energy Security 40 Years after the Embargo - As Delivered Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on Energy...

  9. D.C. Middle and High School Students Get a Chance to Experience...

    Energy Savers [EERE]

    D.C. Middle and High School Students Get a Chance to Experience the Regional Science Bowl Competition Setting D.C. Middle and High School Students Get a Chance to Experience the...

  10. Recovery Act: Integrated DC-DC Conversion for Energy-Efficient Multicore Processors

    SciTech Connect (OSTI)

    Shepard, Kenneth L

    2013-03-31

    In this project, we have developed the use of thin-film magnetic materials to improve in energy efficiency of digital computing applications by enabling integrated dc-dc power conversion and management with on-chip power inductors. Integrated voltage regulators also enables fine-grained power management, by providing dynamic scaling of the supply voltage in concert with the clock frequency of synchronous logic to throttle power consumption at periods of low computational demand. The voltage converter generates lower output voltages during periods of low computational performance requirements and higher output voltages during periods of high computational performance requirements. Implementation of integrated power conversion requires high-capacity energy storage devices, which are generally not available in traditional semiconductor processes. We achieve this with integration of thin-film magnetic materials into a conventional complementary metal-oxide-semiconductor (CMOS) process for high-quality on-chip power inductors. This project includes a body of work conducted to develop integrated switch-mode voltage regulators with thin-film magnetic power inductors. Soft-magnetic materials and inductor topologies are selected and optimized, with intent to maximize efficiency and current density of the integrated regulators. A custom integrated circuit (IC) is designed and fabricated in 45-nm CMOS silicon-on-insulator (SOI) to provide the control system and power-train necessary to drive the power inductors, in addition to providing a digital load for the converter. A silicon interposer is designed and fabricated in collaboration with IBM Research to integrate custom power inductors by chip stacking with the 45-nm CMOS integrated circuit, enabling power conversion with current density greater than 10A/mm2. The concepts and designs developed from this work enable significant improvements in performance-per-watt of future microprocessors in servers, desktops, and mobile devices. These new approaches to scaled voltage regulation for computing devices also promise significant impact on electricity consumption in the United States and abroad by improving the efficiency of all computational platforms. In 2006, servers and datacenters in the United States consumed an estimated 61 billion kWh or about 1.5% of the nation's total energy consumption. Federal Government servers and data centers alone accounted for about 10 billion kWh, for a total annual energy cost of about $450 million. Based upon market growth and efficiency trends, estimates place current server and datacenter power consumption at nearly 85 billion kWh in the US and at almost 280 billion kWh worldwide. Similar estimates place national desktop, mobile and portable computing at 80 billion kWh combined. While national electricity utilization for computation amounts to only 4% of current usage, it is growing at a rate of about 10% a year with volume servers representing one of the largest growth segments due to the increasing utilization of cloud-based services. The percentage of power that is consumed by the processor in a server varies but can be as much as 30% of the total power utilization, with an additional 50% associated with heat removal. The approaches considered here should allow energy efficiency gains as high as 30% in processors for all computing platforms, from high-end servers to smart phones, resulting in a direct annual energy savings of almost 15 billion kWh nationally, and 50 billion kWh globally. The work developed here is being commercialized by the start-up venture, Ferric Semiconductor, which has already secured two Phase I SBIR grants to bring these technologies to the marketplace.

  11. Fig.1: Digital Controller with modified buck-boost converter LOAD-INTERACTIVE STEERED-INDUCTOR DC-DC

    E-Print Network [OSTI]

    Prodiæ, Aleksandar

    Fig.1: Digital Controller with modified buck-boost converter LOAD-INTERACTIVE STEERED-INDUCTOR DC-inverting buck- boost. Transient response results show that, compared to standard converters with near-inverting buck-boost converter, i.e. steered-inductor buck-boost, a digital controller, and a communication block

  12. Building Scale DC Microgrids Chris Marnay, Steven Lanzisera, Michael Stadler, and Judy Lai

    E-Print Network [OSTI]

    of building loads are either native DC, such as electronics and compact fluorescent and light emitting diode

  13. Potential Federal On-Site Solar Aggregation in Washington, D.C., and Maryland

    Broader source: Energy.gov [DOE]

    Presentation describes potential Federal on-site solar aggregation opportunities in Washington, D.C., and Maryland.

  14. Interviews in Washington, DC for Albert Einstein Fellowship Semi-Finalists

    Broader source: Energy.gov [DOE]

    Selected semi-finalists in the Albert Einstein Distinguished Educator Fellowship are invited to DC for interviews.

  15. Demonstration of LED Retrofit Lamps at the Smithsonian Art Museum, Washington, DC

    SciTech Connect (OSTI)

    Miller, N. J.; Rosenfeld, S. M.

    2012-06-01

    GATEWAY program report on a demonstration of LED retrofit lamps at the Smithsonian American Art Museum in Washington, DC.

  16. Sputter target erosion and its effects on long duration DC magnetron sputter coating

    E-Print Network [OSTI]

    Schoff, Michael Elliott

    2009-01-01

    Duration DC Magnetron Sputter Coating A thesis submitted in1 II. Sputter Coating24 VII. Coating Rate vs.

  17. Energy Department Unveils 3D-Printed Building; New Initiatives...

    Office of Environmental Management (EM)

    Unveils 3D-Printed Building; New Initiatives During Industry Day Energy Department Unveils 3D-Printed Building; New Initiatives During Industry Day October 1, 2015 - 12:25pm...

  18. Characterizing tensile loading responses of 3D printed samples

    E-Print Network [OSTI]

    Haid, Christopher M

    2014-01-01

    An experimental study was performed to characterize the loading response of samples manufactured through 3D printing. Tensile testing was performed on a number of 3D printed samples created through Fused Filament Fabrication ...

  19. Reactive binders for metal parts produced by Three Dimensional Printing

    E-Print Network [OSTI]

    Yoo, Helen Jean

    1997-01-01

    Three Dimensional Printing (3DP) is a solid free form fabrication process which enables the construction of parts directly from computer-aided design (CAD) models. In the current process, metal parts are produced by printing ...

  20. Mechanical testing of rapid-prototyping refractory ceramic print media

    E-Print Network [OSTI]

    Martin, Rachel (Rachel M.)

    2013-01-01

    Additively manufactured (3D-printed) refractory alumina-silica ceramics were mechanically tested to ascertain their ultimate tensile strengths and observed to determine their dimensional consistency over the printing and ...

  1. Gas cushion control of OVJP print head position

    DOE Patents [OSTI]

    Forrest, Stephen R

    2014-10-07

    An OVJP apparatus and method for applying organic vapor or other flowable material to a substrate using a printing head mechanism in which the print head spacing from the substrate is controllable using a cushion of air or other gas applied between the print head and substrate. The print head is mounted for translational movement towards and away from the substrate and is biased toward the substrate by springs or other means. A gas cushion feed assembly supplies a gas under pressure between the print head and substrate which opposes the biasing of the print head toward the substrate so as to form a space between the print head and substrate. By controlling the pressure of gas supplied, the print head separation from the substrate can be precisely controlled.

  2. A nonlinear robust HVDC control for a parallel AC/DC power system

    E-Print Network [OSTI]

    Qu, Zhihua

    recognized that, through an HVDC transmission line, fast electronic control can be applied on the DC power, controlling DC line transmission power can improve stability of the AC system after a major disturbanceA nonlinear robust HVDC control for a parallel AC/DC power system Hongzhi Cai a , Zhihua Qu b

  3. Towards Building an Optimal Demand Response Framework for DC Distribution Networks

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    Towards Building an Optimal Demand Response Framework for DC Distribution Networks Hamed Mohsenian, an optimization-based foundation is proposed for demand response in DC distribution networks in presence to assess the performance and to gain insights into the proposed demand-response paradigm. Keywords: DC

  4. Aalborg Universitet Generation-Side Power Scheduling in a Grid-Connected DC Microgrid

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Generation-Side Power Scheduling in a Grid-Connected DC Microgrid Hernández). Generation-Side Power Scheduling in a Grid-Connected DC Microgrid. In IEEE ICDCM 2015. IEEE. General rights.aau.dk on: juli 04, 2015 #12;Generation-Side Power Scheduling in a Grid-Connected DC Microgrid Adriana C

  5. Aalborg Universitet Modeling, Stability Analysis and Active Stabilization of Multiple DC-Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Modeling, Stability Analysis and Active Stabilization of Multiple DC-Microgrids and Active Stabilization of Multiple DC-Microgrids Clusters. In Proceedings of the 2014 IEEE International of Multiple DC-Microgrid Clusters," in Proc. IEEE International Energy Conference (EnergyCon'14), 2014

  6. Aalborg Universitet Agent-based distributed hierarchical control of dc microgrid systems

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Agent-based distributed hierarchical control of dc microgrid systems Meng, J. M., & Dragicevic, T. (2014). Agent-based distributed hierarchical control of dc microgrid systems-BASED DISTRIBUTED HIERARCHICAL CONTROL OF DC MICROGRID SYSTEMS Lexuan Meng, Tomislav Dragicevic, Josep M. Guerrero

  7. OLENDER REPORTING, INC. 1100 Connecticut Avenue NW, #810, Washington, DC 20036

    E-Print Network [OSTI]

    1 OLENDER REPORTING, INC. 1100 Connecticut Avenue NW, #810, Washington, DC 20036 Washington: 202 Avenue17 Washington, D.C.18 19 20 21 22 #12;2 OLENDER REPORTING, INC. 1100 Connecticut Avenue NW, #810 #12;3 OLENDER REPORTING, INC. 1100 Connecticut Avenue NW, #810, Washington, DC 20036 Washington: 202

  8. Control of a Fuel-Cell Powered DC Electric Vehicle Motor

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith Sigurd Skogestad Meeting, 2005 www.ntnu.no Federico Zenith, Sigurd Skogestad, Control of a Fuel-Cell Powered DC Electric Vehicle Motor #12;2 Outline 1) Control of Fuel Cells--Status 2) Dynamic Modelling of Fuel Cells 3) DC

  9. Structural Optimization and 3D Printing Robert V. Kohn

    E-Print Network [OSTI]

    Structural Optimization and 3D Printing Robert V. Kohn Courant Institute, NYU SIAM CS&E Meeting, March 2015 Robert V. Kohn Structural Optimization and 3D Printing #12;Outline Mandate: identify areas with interesting open questions. Hence 3D printing and structural optimization. My involvement began

  10. 3D Printing of Functional and Biological Materials

    E-Print Network [OSTI]

    ! 3D Printing of Functional and Biological Materials Jennifer A. Lewis Wyss Professor)! Multimaterial 3D printing ! #12;3D antennas! Li ion microbatteries! Lightweight microlattices!Flexible sensors! 3D Printing of Integrated Electronic Devices ! #12;20 nm average , 5 ­ 50 nm

  11. TRANSCONTINENTAL PRINTING INC.: FULL SCALE DEMONSTRATION OF A

    E-Print Network [OSTI]

    #12;TRANSCONTINENTAL PRINTING INC.: FULL SCALE DEMONSTRATION OF A TREATMENT TECHNOLOGY TO REDUCE Prevention Section Environment Canada 224 West Esplanade North Vancouver, B.C. V7M 3H7 #12;Transcontinental at the Transcontinental Printing facility in Delta, BC. At the time of writing, Transcontinental was the only printing

  12. Fabrication of glucose biosensors by inkjet printing

    E-Print Network [OSTI]

    Wang, Tianming; Serban, Simona; Ali, Tarif; Drago, Guido; Derby, Brian

    2012-01-01

    Inkjet printing has been used to fabricate glucose sensors using glucose oxidase and screen printed carbon electrodes. By appropriate selection of printing and drying conditions we are able to fabricate sensor structures that show a good linear response to glucose concentration. In order to achieve these structures we must carefully control the spreading and drying of the enzyme solution on the carbon electrode. Carbon electrode suirfaces are hydrophobic and Triton X was used as a surfactant to allow full coverage of the electrode surface. During drying, under ambient conditions the enzyme solution segregates to form a ring deposit (coffee staining). Coffee staining is shown to be deleterious to sensor performance and it can be removed by drying in a reduced humidity environment.

  13. Multilevel cascade voltage source inverter with separate DC sources

    DOE Patents [OSTI]

    Peng, F.Z.; Lai, J.S.

    1997-06-24

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

  14. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng (Oak Ridge, TN); Lai, Jih-Sheng (Knoxville, TN)

    1997-01-01

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  15. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng; Lai, Jih-Sheng

    2001-04-03

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  16. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng (Knoxville, TN); Lai, Jih-Sheng (Blacksburg, VA)

    2002-01-01

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  17. AVTA: Battery Testing- DC Fast Charging's Effects on PEV Batteries

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following report describes DC fast charging's effects on plug-in electric vehicle batteries. This research was conducted by Idaho National Laboratory.

  18. The Use of DC Glow Discharges as Undergraduate Educational Tools

    SciTech Connect (OSTI)

    Stephanie A. Wissel and Andrew Zwicker, Jerry Ross, and Sophia Gershman

    2012-10-09

    Plasmas have a beguiling way of getting students excited and interested in physics. We argue that plasmas can and should be incorporated into the undergraduate curriculum as both demonstrations and advanced investigations of electromagnetism and quantum effects. Our device, based on a direct current (DC) glow discharge tube, allows for a number of experiments into topics such as electrical breakdown, spectroscopy, magnetism, and electron temperature.

  19. dc-plasma-sprayed electronic-tube device

    DOE Patents [OSTI]

    Meek, T.T.

    1982-01-29

    An electronic tube and associated circuitry which is produced by dc plasma arc spraying techniques is described. The process is carried out in a single step automated process whereby both active and passive devices are produced at very low cost. The circuitry is extremely reliable and is capable of functioning in both high radiation and high temperature environments. The size of the electronic tubes produced are more than an order of magnitude smaller than conventional electronic tubes.

  20. Synthesis of silicon nanotubes by DC arc plasma method

    SciTech Connect (OSTI)

    Tank, C. M.; Bhoraskar, S. V.; Mathe, V. L.

    2012-06-05

    Plasma synthesis is a novel technique of synthesis of nanomaterials as they provide high rate of production and promote metastable reactions. Very thin walled silicon nanotubes were synthesized in a DC direct arc thermal plasma reactor. The effect of parameters of synthesis i.e. arc current and presence of hydrogen on the morphology of Si nanoparticles is reported. Silicon nanotubes were characterized by Transmission Electron Microscopy (TEM), Local Energy Dispersive X-ray analysis (EDAX), and Scanning Tunneling Microscopy (STM).

  1. Report on Non-Contact DC Electric Field Sensors

    SciTech Connect (OSTI)

    Miles, R; Bond, T; Meyer, G

    2009-06-16

    This document reports on methods used to measure DC electrostatic fields in the range of 100 to 4000 V/m using a non-contact method. The project for which this report is written requires this capability. Non-contact measurements of DC fields is complicated by the effect of the accumulation of random space-charges near the sensors which interfere with the measurement of the field-of-interest and consequently, many forms of field measurements are either limited to AC measurements or use oscillating devices to create pseudo-AC fields. The intent of this document is to report on methods discussed in the literature for non-contact measurement of DC fields. Electric field meters report either the electric field expressed in volts per distance or the voltage measured with respect to a ground reference. Common commercial applications for measuring static (DC) electric fields include measurement of surface charge on materials near electronic equipment to prevent arcing which can destroy sensitive electronic components, measurement of the potential for lightning to strike buildings or other exposed assets, measurement of the electric fields under power lines to investigate potential health risks from exposure to EM fields and measurement of fields emanating from the brain for brain diagnostic purposes. Companies that make electric field sensors include Trek (Medina, NY), MKS Instruments, Boltek, Campbell Systems, Mission Instruments, Monroe Electronics, AlphaLab, Inc. and others. In addition to commercial vendors, there are research activities continuing in the MEMS and optical arenas to make compact devices using the principles applied to the larger commercial sensors.

  2. USCOMM-WB-DC PRELIMZNARY REPORT OH HURRICANE DAISY

    E-Print Network [OSTI]

    QC 945.2 .D3 H8 1958 c.2 #12;#12;USCOMM-WB-DC #12;PRELIMZNARY REPORT OH HURRICANE DAISY AWGUST 24-29, 1958 Hurricane "Daisy", intense but small in area, was detected as a tropical storm about 300 miles into a hurricane on August 25. A u g u s t 27 it drifted very slowly northward. coast increased. the Atlantic off

  3. Energy Incentive Programs, Washington DC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeCommunication3-EDepartment ofArizona EnergyHampshire EnergyOregonTexasWashington DC

  4. Guidelines on Distribution of Printed Material on the LSU Campus Distribution of literature and other printed material on campus is governed by

    E-Print Network [OSTI]

    Harms, Kyle E.

    Guidelines on Distribution of Printed Material on the LSU Campus Distribution of literature and other printed material on campus is governed by several and PS-06 on Solicitation of Advertisement. Because distribution of printed material

  5. Using Nyquist or Nyquist-Like Plot to Predict Three Typical Instabilities in DC-DC Converters

    E-Print Network [OSTI]

    Fang, Chung-Chieh

    2012-01-01

    By transforming an exact stability condition, a new Nyquist-like plot is proposed to predict occurrences of three typical instabilities in DC-DC converters. The three instabilities are saddle-node bifurcation (coexistence of multiple solutions), period-doubling bifurcation (subharmonic oscillation), and Neimark bifurcation (quasi-periodic oscillation). In a single plot, it accurately predicts whether an instability occurs and what type the instability is. The plot is equivalent to the Nyquist plot, and it is a useful design tool to avoid these instabilities. Nine examples are used to illustrate the accuracy of this new plot to predict instabilities in the buck or boost converter with fixed or variable switching frequency.

  6. Using Nyquist or Nyquist-Like Plot to Predict Three Typical Instabilities in DC-DC Converters

    E-Print Network [OSTI]

    Chung-Chieh Fang

    2012-04-09

    By transforming an exact stability condition, a new Nyquist-like plot is proposed to predict occurrences of three typical instabilities in DC-DC converters. The three instabilities are saddle-node bifurcation (coexistence of multiple solutions), period-doubling bifurcation (subharmonic oscillation), and Neimark bifurcation (quasi-periodic oscillation). In a single plot, it accurately predicts whether an instability occurs and what type the instability is. The plot is equivalent to the Nyquist plot, and it is a useful design tool to avoid these instabilities. Nine examples are used to illustrate the accuracy of this new plot to predict instabilities in the buck or boost converter with fixed or variable switching frequency.

  7. Multiphase soft switched DC/DC converter and active control technique for fuel cell ripple current elimination

    DOE Patents [OSTI]

    Lai, Jih-Sheng (Blacksburg, VA); Liu, Changrong (Sunnyvale, CA); Ridenour, Amy (Salem, VA)

    2009-04-14

    DC/DC converter has a transformer having primary coils connected to an input side and secondary coils connected to an output side. Each primary coil connects a full-bridge circuit comprising two switches on two legs, the primary coil being connected between the switches on each leg, each full-bridge circuit being connected in parallel wherein each leg is disposed parallel to one another, and the secondary coils connected to a rectifying circuit. An outer loop control circuit that reduces ripple in a voltage reference has a first resistor connected in series with a second resistor connected in series with a first capacitor which are connected in parallel with a second capacitor. An inner loop control circuit that reduces ripple in a current reference has a third resistor connected in series with a fourth resistor connected in series with a third capacitor which are connected in parallel with a fourth capacitor.

  8. Deep Trench Capacitor based Step-up and Step-down DC/DC Converters in 32nm SOI with Opportunistic

    E-Print Network [OSTI]

    Sapatnekar, Sachin

    Deep Trench Capacitor based Step-up and Step-down DC/DC Converters in 32nm SOI with Opportunistic domains. Using ultra-high density deep trench capacitors, we are able to achieve an output power density-power domain scenario by implementing a bi-directional opportunistic current borrowing scheme. Deep trench

  9. Abstract--Emerging high-end portable electronics demand on-chip integration of high-performance dc-dc power supplies not

    E-Print Network [OSTI]

    Rincon-Mora, Gabriel A.

    series resistance (ESR) output capacitors, it is not clear how it applies to boost converters boost converter. Experimental results verified the switching supply was stable across 1-30µH, 1-350µ variation to less than 27%. Index Terms--differential control, boost dc-dc converter I. INTRODUCTION

  10. SoC Energy Savings = Reduce+Reuse+Recycle: A Case Study Using a 660MHz DC-DC Converter with Integrated Output Filter

    E-Print Network [OSTI]

    Lemieux, Guy

    that requires careful planning of the interface between the provider and receptor of the energy. In this paper between energy provider and receptor. Since fully integrated on-chip regulators are usually inefficientSoC Energy Savings = Reduce+Reuse+Recycle: A Case Study Using a 660MHz DC-DC Converter

  11. 2004 35Ih Annual IEEE Power Elearonics Specialisrs Conference Aachen, Germany,2004 Modeling of Quantization Effects in Digitally Controlled DC-DC Converters

    E-Print Network [OSTI]

    Prodiæ, Aleksandar

    : {hpeng,maksimov)@colorado.edu Abstract- In digitally controlled DC-DC converters with a single voltage variations, programmability, reduction or elimination of external passive components, as well a conservative hound for the limit-cycle oscillation amplitude, while Section VI11 summarizes the conclusions. 11

  12. 26.2 Single-Inductor Dual-Input Dual-Output Buck-Boost Fuel Cell-Li Ion Charging DC-DC Converter Supply

    E-Print Network [OSTI]

    Rincon-Mora, Gabriel A.

    1 26.2 Single-Inductor Dual-Input Dual-Output Buck-Boost Fuel Cell-Li Ion Charging DC-DC Converter battery with its energy-dense counterpart like the fuel cell (FC) improves micro-scale integration [2]. As a result, buck or boost single-inductor, dual-input, dual-output (SIDIDO) converters enjoy

  13. Abstract -This paper presents the coordinated control of distributed energy storage systems (DESSs) in DC micro-grids.

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    ) in DC micro-grids. In order to balance the state-of-charge (SoC) of each energy storage unit (ESU--Droop control; distributed energy storage system (DESS); DC micro-grids; state-of-charge (SoC) I. INTRODUCTION and more popularity [1]. Nowadays DC micro-grids are becoming more attractive with the raise of DC power

  14. 650 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 26, NO. 2, APRIL 2011 Hourly Scheduling of DC Transmission Lines in

    E-Print Network [OSTI]

    Fu, Yong

    ). The impact of VSC-DC transmission system on the economics and the security of integrated ac/dc transmission will determine the optimal hourly schedule of controllable VSC-DC transmission systems in electricity markets;LOTFJOU et al.: HOURLY SCHEDULING OF DC TRANSMISSION LINES 651 , Vector of real and reactive power

  15. 936 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 50, NO. 5, OCTOBER 2003 Gain Adaptation of Networked DC Motor Controllers

    E-Print Network [OSTI]

    Chow, Mo-Yuen

    ) milling machine, dc motors can be connected to controllers, drivers and sensors by directly wiring

  16. PRINT ONLY: GLOBAL WARMING Alexeev V. A.

    E-Print Network [OSTI]

    Rathbun, Julie A.

    PRINT ONLY: GLOBAL WARMING Alexeev V. A. Global Warming: 0.6°C or Less? [#1035] The peculiarities of global warming on the Earth during the last century are discussed. Lunar and Planetary Science XXXVIII (2007) full818.pdf #12;GLOBAL WARMING: 0.6 OR LESS? V.A.Alexeev; Vernadsky Institute of Geochemistry

  17. 3D Printing Prof. Hank Dietz

    E-Print Network [OSTI]

    Dietz, Henry G. "Hank"

    #12;Our 3D Printer It's a MakerGear M2, cost about $1700 We extrude 1.75mm diameter PLA filament3D Printing Prof. Hank Dietz TCMS, March 14, 2014 University of Kentucky Electrical & Computer/Craft: paper moves in Y, knife in X EDM/Laser: X/Y bed, vaporizes material #12;Subtractive 3D CNC: Computer

  18. Print this Page Close The nuclear deal

    E-Print Network [OSTI]

    league. B At least in the eyes of the United States, India is now a nuclear weapons state. The gamble 'Entity List', which was drawn up outside the non-proliferation laws after our nuclear weapon testsPrint this Page Close The nuclear deal July 20, 2005 | 19:05 ISTT P Sreenivasan | y assuming

  19. ISSN 0104-6632 Printed in Brazil

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    ISSN 0104-6632 Printed in Brazil www.abeq.org.br/bjche Vol. 27, No. 03, pp. 000 - 000, July, Brazil, and published in Computer Aided Chemical Engineering, vol. 27, p. 1917-1922. Brazilian Journal-909, Rio de Janeiro - RJ, Brazil. E-mail: ofelia@eq.ufrj.br (Submitted: December 1, 2009 ; Revised: June 1

  20. Printed on Recycled Paper United States

    E-Print Network [OSTI]

    the Clean Air Act, further tightening emission standards. The NOx standard is set at 0.6 gpm for cars1 Emission Facts Printed on Recycled Paper United States Environmental Protection Agency Air and Radiation EPA420-F-99-017 May 1999 Office of Mobile Sources The History of Reducing Tailpipe Emissions 1970

  1. Printing a poster? Make an appointment!

    E-Print Network [OSTI]

    Niebur, Ernst

    Formats, click on PNG Change the Resolution to 150 dpi Click Save. #12;In PowerPoint: File Print Select new window that pops up: Change Document Title Click Save Under the Save as Type drop down menu, select PNG Click Save Check your output image for correct orientation and layout. If incorrect, change

  2. NUSTAR User Guide Print Grade Roster

    E-Print Network [OSTI]

    Fleming, Andrew J.

    . Enter the Term and select Final next to Grade Roster. 3. For a school based report, select the Academic by the Head of School Pawthway: Curriculum Management> Grading>Print Grade Roster 1. Click the Search button for a specific class, click the Specific Class option and enter the desired information into the Class Nbr field

  3. Empowering the Industrial Internet of Things with 3D Printed Sensors and Antennas

    E-Print Network [OSTI]

    Das, Suman

    3/23/15 1 Empowering the Industrial Internet of Things with 3D Printed Sensors and Antennas Optomec Enabling Technology for the IIoT 9 Fully Print 3D Parts or Print-on 3Dtm Parts · Print Structural-process (dry, cure, sinter...) Part § Fine line traces § 3D Conformal printing § Interconnects § Embedded

  4. Title Format and Order Type AAS History Series Print; Serial Standing Order

    E-Print Network [OSTI]

    Clayton, Dale H.

    Title Format and Order Type AAS History Series Print; Serial Standing Order Advanced Series in Astrophysics and Cosmology Continuation/Print Monograph Standing Order Akzente Print, Serial Alexander Lectures Continuation/Print Monograph Standing Order, Discontinued? Annales de démographie historique Print, Serial

  5. Materials with low DC magnetic susceptibility for sensitive magnetic measurements

    E-Print Network [OSTI]

    Rakshya Khatiwada; Lawrence Dennis; Rachel Kendrick; Marjan Khosravi; Michael Peters; Erick Smith; Mike Snow

    2015-06-30

    Materials with very low DC magnetic susceptibility have many scientific applications. To our knowledge however, relatively little research has been conducted with the goal to produce a totally nonmagnetic material. This phrase in our case means after spatially averaging over macroscopic volumes, it possesses an average zero DC magnetic susceptibility. We report measurements of the DC magnetic susceptibility of three different types of nonmagnetic materials at room temperature: (I) solutions of paramagnetic salts and diamagnetic liquids, (II) liquid gallium-indium alloys and (III) pressed powder mixtures of tungsten and bismuth. The lowest measured magnetic susceptibility among these candidate materials is in the order of 10^-9 cgs volume susceptibility units, about two orders of magnitude smaller than distilled water. In all cases, the measured concentration dependence of the magnetic susceptibility is consistent with that expected for the weighted sum of the susceptibilities of the separate components within experimental error. These results verify the Wiedemann additivity law and thereby realize the ability to produce materials with small but tunable magnetic susceptibility. For our particular scientific application, we are also looking for materials with the largest possible number of neutrons and protons per unit volume. The gallium-indium alloys fabricated and measured in this work possess to our knowledge the smallest ratio of volume magnetic susceptibility to nucleon number density per unit volume for a room temperature liquid, and the tungsten-bismuth pressed powder mixtures possess to our knowledge the smallest ratio of volume magnetic susceptibility to nucleon number density per unit volume for a room temperature solid. This ratio is a figure of merit for a certain class of precision experiments that search for possible exotic spin-dependent forces of Nature.

  6. Review: 3D Printing: Social and Cultural Trajectories Symposium -3D Printing Industry http://3dprintingindustry.com/2013/12/11/review-3d-printing-social-cultural-trajectories-symposium/[12/12/2013 11:25:00 AM

    E-Print Network [OSTI]

    Review: 3D Printing: Social and Cultural Trajectories Symposium - 3D Printing Industry http://3dprintingindustry.com/2013/12/11/review-3d-printing-social-cultural-trajectories-symposium/[12/12/2013 11:25:00 AM] Review: 3D Printing: Social and Cultural Trajectories Symposium BY ANGELA DALY & DARCY ALLEN ON WED

  7. Positron lifetime spectrometer using a DC positron beam

    DOE Patents [OSTI]

    Xu, Jun; Moxom, Jeremy

    2003-10-21

    An entrance grid is positioned in the incident beam path of a DC beam positron lifetime spectrometer. The electrical potential difference between the sample and the entrance grid provides simultaneous acceleration of both the primary positrons and the secondary electrons. The result is a reduction in the time spread induced by the energy distribution of the secondary electrons. In addition, the sample, sample holder, entrance grid, and entrance face of the multichannel plate electron detector assembly are made parallel to each other, and are arranged at a tilt angle to the axis of the positron beam to effectively separate the path of the secondary electrons from the path of the incident positrons.

  8. Hardwired Control Changes For NSTX DC Power Feeds

    SciTech Connect (OSTI)

    Ramakrishnan, S.

    2013-06-28

    The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. The original TFTR Hardwired Control System (HCS) with electromechanical relays was used for NSTX DC Power loop control and protection during NSTX operations. As part of the NSTX Upgrade, the HCS is being changed to a PLC-based system with the same control logic. This paper gives a description of the changeover to the new PLC-based system __________________________________________________

  9. Heteroepitaxial Ge-on-Si by DC magnetron sputtering

    SciTech Connect (OSTI)

    Steglich, Martin; Schrempel, Frank; Füchsel, Kevin; Kley, Ernst-Bernhard; Patzig, Christian; Berthold, Lutz; Höche, Thomas; Tünnermann, Andreas; Fraunhofer Institute for Applied Optics and Precision Engineering IOF, Albert-Einstein-Str. 7, 07745 Jena

    2013-07-15

    The growth of Ge on Si(100) by DC Magnetron Sputtering at various temperatures is studied by Spectroscopic Ellipsometry and Transmission Electron Microscopy. Smooth heteroepitaxial Ge films are prepared at relatively low temperatures of 380°C. Typical Stransky-Krastanov growth is observed at 410°C. At lower temperatures (320°C), films are essentially amorphous with isolated nanocrystallites at the Si-Ge interface. A minor oxygen contamination at the interface, developing after ex-situ oxide removal, is not seen to hinder epitaxy. Compensation of dislocation-induced acceptors in Ge by sputtering from n-doped targets is proposed.

  10. EA-327-A DC Energy, LLC | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPL EnergyPlus, LLC to export electricSilverhill Ltdto export electricDC

  11. EA-351 DC Energy Dakota, LLC | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPL EnergyPlus, LLC to export electricSilverhillSaracenCreditNextEraDC

  12. EA-377 DC Energy Texas | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPL EnergyPlus, LLC to exportEndure Energy,Vitol Inc toDC Energy Texas to

  13. Category:DC Resistivity Survey (Wenner Array) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmentalBowerbank,Cammack Village,8199089°,AnalyticalCuttings Analysis JumpDC Resistivity

  14. Global DC Power System Market Analysis | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View New Pages RecentPlant <SilverChange Associates JumpGlobal DC Power

  15. DC Resistivity Survey (Dipole-Dipole Array) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoopButtePower VenturesInformation9) Wind Farm JumpAlum|Cyclone PowerD1DC

  16. Categorical Exclusion Determinations: Washington, D.C. | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a lCaribElectricSouth Dakota. DOCUMENTSEnergy Washington, D.C.

  17. Dynamic testing of polydimethylsiloxane for applications in micro-contact roll printing

    E-Print Network [OSTI]

    Benjaminson, Emma Claire

    2014-01-01

    Micro-contact roll printing is an emerging alternative to photolithography as a means of cheaply manufacturing MEMS devices. Micro-contact roll printing control systems can regulate the printing pressure of a polydimethylsiloxane ...

  18. Evaluation of PC-ISO for customized, 3D printed, gynecologic 192Ir HDR brachytherapy applicators

    E-Print Network [OSTI]

    2015-01-01

    A, Iuliano L, Violante MG. 3D printing technique applied toTengg-Kobligk H, et al. 3D printing based on imaging data:biocompatible, sterilizable 3D printing material, and its

  19. Improvement of 3D Printing Resolution by the Development of Shrinkable Materials

    E-Print Network [OSTI]

    Chia, Helena

    2014-01-01

    derived microstructures by 3D printing: bio-and structuralScaffold development using 3D printing with a starch-basedderived microstructures by 3D printing: bio-and structural

  20. "Printing" Tiny Batteries | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    P: (202) 586-5430 06.24.13 "Printing" Tiny Batteries Researchers use sophisticated 3D printing techniques to create batteries the size of a grain of sand. Print Text Size: A A A...

  1. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Wednesday, 25 February 2015 00:00 Plastic solar cells...

  2. Print-and-Peel Fabrication for Microfluidics: What’s in it for Biomedical Applications?

    E-Print Network [OSTI]

    Thomas, Marlon S.; Millare, Brent; Clift, Joseph M.; Bao, Duoduo; Hong, Connie; Vullev, Valentine I.

    2010-01-01

    have the capability for 3D printing, and hence, for directlyof direct three-dimensional (3D) printing of masters using a3D elements allow for achieving fea- tures, demonstrated with solid-object printing,

  3. Improvement of 3D Printing Resolution by the Development of Shrinkable Materials

    E-Print Network [OSTI]

    Chia, Helena

    2014-01-01

    learned a lot about 3D printing and myself in this processderived microstructures by 3D printing: bio-and structuralScaffold development using 3D printing with a starch-based

  4. Single-mode deformation via nanoindentation in dc-Si

    SciTech Connect (OSTI)

    Wong, Sherman; Haberl, Bianca; Williams, James S.; Bradby, Jodie E.

    2015-01-01

    The mixture of the metastable body-centered cubic (bc8) and rhombohedral (r8) phases of silicon that is formed via nanoindentation of diamond cubic (dc) silicon exhibits properties that are of scientifc and technological interest. This letter demonstrates that large regions of this mixed phase can be formed in crystalline Si via nanoindentation without signifcant damage to the surrounding crystal. Cross-sectional transmission electron microscopy is used to show that volumes 6 um wide and up to 650 nm deep can be generated in this way using a spherical tip of 21.5 um diameter. The phase transformed region is characterised using both Raman microspectroscopy and transmission electron microscopy. It is found that uniform loading using large spherical indenters can favor phase transformation as the sole deformation mechanism as long as the maximum load is below a critical level. We suggest that the sluggish nature of the transformation from the dc-Si phase to the metallic (b-Sn) phase normally results in competing deformation mechanisms such as slip and cracking but these can be suppressed by controlled loading conditions.

  5. DC switching regulated power supply for driving an inductive load

    DOE Patents [OSTI]

    Dyer, G.R.

    1983-11-29

    A dc switching regulated power supply for driving an inductive load is provided. The regulator basic circuit is a bridge arrangement of diodes and transistors. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. A dc power supply is connected to the input of the bridge and the output is connected to the load. A servo controller is provided to control the switching rate of the transistors to maintain a desired current to the load. The regulator may be operated in three stages or modes: (1) for current runup in the load, both first and second transistor switch arrays are turned on and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned off, and load current flywheels through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays off, allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load.

  6. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    ballast fluorescent and LED lighting, which are DC- internalmotors [7]. Fluorescent and LED lighting uses one-quarter ofbest technology Lighting Incandescent, fluorescent, LED

  7. Harnessing the Power of the Sun, Solar Impulse Plane Lands in DC Area

    Office of Energy Efficiency and Renewable Energy (EERE)

    Today, Secretary Moniz spoke at an event welcoming the arrival of the solar-powered Solar Impulse plane at Dulles International Airport near Washington, D.C.

  8. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01

    motors [7]. Fluorescent and LED lighting uses one-quarter ofballast fluorescent and LED lighting, which are DC- internalbest technology Lighting Incandescent, fluorescent, LED

  9. DC Resistivity Survey (Dipole-Dipole Array) At Mt Princeton Hot...

    Open Energy Info (EERE)

    1971) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: DC Resistivity Survey (Dipole-Dipole Array) At Mt Princeton Hot Springs Geothermal Area...

  10. Optimization of spin-torque switching using AC and DC pulses

    SciTech Connect (OSTI)

    Dunn, Tom [Department of Physics, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Kamenev, Alex [Department of Physics, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Fine Theoretical Physics Institute, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

    2014-06-21

    We explore spin-torque induced magnetic reversal in magnetic tunnel junctions using combined AC and DC spin-current pulses. We calculate the optimal pulse times and current strengths for both AC and DC pulses as well as the optimal AC signal frequency, needed to minimize the Joule heat lost during the switching process. The results of this optimization are compared against numeric simulations. Finally, we show how this optimization leads to different dynamic regimes, where switching is optimized by either a purely AC or DC spin-current, or a combination AC/DC spin-current, depending on the anisotropy energies and the spin-current polarization.

  11. A Docking Casette For Printed Circuit Boards

    DOE Patents [OSTI]

    Barringer, Dennis R. (Wallkill, NY); Seminaro, Edward J. (Milton, NY); Toffler, Harold M. (Newburgh, NY)

    2003-08-19

    A docking apparatus for printed circuit boards including a cassette housing, having a housing base, a housing cover and a housing wall, wherein the housing base and the housing wall are disposed relative to each other so as to define a housing cavity for containing a printed circuit board and wherein the housing wall includes a cable opening disposed so as to be communicated with the housing cavity, a linkage mechanism, wherein the linkage mechanism includes an engagement configuration and a disengagement configuration and wherein the linkage mechanism is disposed so as to be associated with the cassette housing and a housing bezel, wherein the housing bezel is disposed relative to the cassette housing so as to be associated with the cable opening.

  12. print_grid() add_vessel()

    E-Print Network [OSTI]

    Sharlin, Ehud

    grid.py print_grid() add_vessel() has_overlap() GRID_WIDTH GRID_HEIGHT NUM_VESSELS B VESSEL_NAMES[] VESSEL_SIZES[] human.py get_location() get_choice() grid_defend[] grid_attack[] import grid ai.py get, return false · add_vessel(grid, row, column, size, direction) ­ Check direction ­ Single for loop (size

  13. Solar paint: From synthesis to printing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Xiaojing; Belcher, Warwick; Dastoor, Paul

    2014-11-13

    Water-based polymer nanoparticle dispersions (solar paint) offer the prospect of addressing two of the main challenges associated with printing large area organic photovoltaic devices; namely, how to control the nanoscale architecture of the active layer and eliminate the need for hazardous organic solvents during device fabrication. We review progress in the field of nanoparticulate organic photovoltaic (NPOPV) devices and future prospects for large-scale manufacturing of solar cells based on this technology.

  14. Printed Name: Page 1 of 9

    E-Print Network [OSTI]

    Walba, David

    on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9 10 11 12 13Printed Name: Page 1 of 9 CHEM 3311 (300), Fall 2014 Professor Walba Third Hour Exam November 18: _____________________________ Recitation day and time: __________________________ This is a closed-book exam. The use of notes, calculators

  15. Printed Name: Page 1 of 7

    E-Print Network [OSTI]

    Walba, David

    on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9 10 11 12 13Printed Name: Page 1 of 7 CHEM 3311-100, Fall 2013 Professor Walba Second Hour Exam October 22: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  16. Printed Name: Page 1 of 6

    E-Print Network [OSTI]

    Walba, David

    on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9 10 11 12 13Printed Name: Page 1 of 6 CHEM 3311-100, Fall 2013 Professor Walba First Hour Exam September 24: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  17. Printed Name: Page 1 of 8

    E-Print Network [OSTI]

    Walba, David

    on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9 10 11 12 13Printed Name: Page 1 of 8 CHEM 3311-100, Fall 2013 Professor Walba Third Hour Exam November 19: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  18. http://www.energy.gov/news/archives/print/5471.htm

    National Nuclear Security Administration (NNSA)

    For Immediate Release September 5, 2007 Department of Energy Announces Decision to Consolidate Surplus Plutonium in South Carolina WASHINGTON, DC - The U.S. Department of Energy...

  19. http://www.energy.gov/print/6310.htm

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For Immediate Release June 3, 2008 DOE Marks Milestone in Submitting Yucca Mountain License Application WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced...

  20. DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 2

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  1. DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  2. DOE fundamentals handbook: Engineering symbology, prints, and drawings

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  3. Novel 3-D Printed Inverters for Electric Vehicles Can Improve...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Efficiency 3D Printed and Semiconductor Technology 'Mash-up' The General Motors Baltimore Operations facility at White Marsh is producing electric motors for the Chevrolet...

  4. Print of William Parsons, 3rd Earl of Rosse

    E-Print Network [OSTI]

    Smith, Stephen Catterson

    1860-01-01

    Print of a portrait painting of William Parsons, 3rd Earl of Rosse (1800-1867) by Stephen Catterson Smith (1860)...

  5. Print-and-Peel Fabrication for Microfluidics: What’s in it for Biomedical Applications?

    E-Print Network [OSTI]

    Thomas, Marlon S.; Millare, Brent; Clift, Joseph M.; Bao, Duoduo; Hong, Connie; Vullev, Valentine I.

    2010-01-01

    of direct three-dimensional (3D) printing of masters using ahave the capability for 3D printing, and hence, for directly

  6. The Future of Manufacturing Takes Shape: 3D Printed Car on Display...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead, Advanced Manufacturing Office Additive manufacturing - often referred to as 3D printing - is a revolutionary way to design and build products. Until now, 3D printing has...

  7. SECONDARY MINERALS FOUND IN CORES DC2 Al AND DC2 TAKEN FROM THE GRANDE RONDE BASALT FORMATION, PASCO BASIN, WASHINGTON

    E-Print Network [OSTI]

    Teague, L.S.

    2010-01-01

    of secondary and primary mineral phases in basalts of theB. , 1975. Perched silia minerals on mordenite fibers. Jour.lt;. UC—70 I SECONDARY MINERALS FOUND IN CORES DC2 AI AND

  8. Discharging a DC bus capacitor of an electrical converter system

    DOE Patents [OSTI]

    Kajouke, Lateef A; Perisic, Milun; Ransom, Ray M

    2014-10-14

    A system and method of discharging a bus capacitor of a bidirectional matrix converter of a vehicle are presented here. The method begins by electrically shorting the AC interface of the converter after an AC energy source is disconnected from the AC interface. The method continues by arranging a plurality of switching elements of a second energy conversion module into a discharge configuration to establish an electrical current path from a first terminal of an isolation module, through an inductive element, and to a second terminal of the isolation module. The method also modulates a plurality of switching elements of a first energy conversion module, while maintaining the discharge configuration of the second energy conversion module, to at least partially discharge a DC bus capacitor.

  9. Thermal cum DC Camouflage in Duet with Undecorated Natural Materials

    E-Print Network [OSTI]

    Yang, Tian-Zhi; Gao, Dongliang; Wu, Linzhi; Li, Baowen; Thong, John T L; Qiu, Cheng-Wei

    2015-01-01

    To manipulate various types of physical signals in one single device has long captivated the attention of scientists and engineers. This however is very challenging, if not impossible, even for emerging metamaterials. Up to date, many artificial materials have been proposed, theoretically and (or) experimentally, for manipulating various waves/signals on a one-function-one-device basis. In this work, for the very first time, we employ undecorated natural materials to experimentally demonstrate a simultaneous camouflage for thermal current and electric dc current on the same device. It demonstrates how ingenuity can overcome the limitations of natural material systems without the need for complex decoration to impart inhomogeneous and (or) anisotropic properties, which was previously considered impossible to accomplish except by using metamaterials.

  10. FLUXCAP: A flux-coupled ac/dc magnetizing device

    E-Print Network [OSTI]

    Gopman, Daniel B; Kent, Andrew D

    2012-01-01

    We report on an instrument for applying ac and dc magnetic fields by capturing the flux from a rotating permanent magnet and projecting it between two adjustable pole pieces. This can be an alternative to standard electromagnets for experiments with small samples or in probe stations in which an applied magnetic field is needed locally, with advantages that include a compact form-factor, very low power requirements and dissipation as well as fast field sweep rates. This flux capture instrument (FLUXCAP) can produce fields from -400 to +400 mT, with field resolution less than 1 mT. It generates static magnetic fields as well as ramped fields, with ramping rates as high as 10 T/s. We demonstrate the use of this apparatus for studying the magnetotransport properties of spin-valve nanopillars, a nanoscale device that exhibits giant magnetoresistance.

  11. Superconducting DC and RF Properties of Ingot Niobium

    SciTech Connect (OSTI)

    Pashupati Dhakal, Gianluigi Ciovati, Peter Kneisel, Ganapati Rao Myneni

    2011-07-01

    The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the influence of chemical and heat-treatment processes on the superconducting properties, with no significant dependence on the impurity concentrations in the original ingots. Furthermore, RF properties, such as the surface resistance and quench field of the niobium rods were measured using a TE{sub 011} cavity. The hollow niobium rod is the center conductor of this cavity, converting it to a coaxial cavity. The quench field is limited by the critical heat flux through the rods' cooling channel.

  12. Possible temperature control DC switch effect between two superconductors

    E-Print Network [OSTI]

    Tian De Cao

    2011-08-11

    The lifetime of an electron pair could not be unlimited long, on the basis of this, we suggest a model. The model means that the movements of charge carriers in a superconductor should have three forms: the single-electron movement, the single-pair movement, and the revolving around the mass center of two electrons in a pair. Thus the current in a superconductor has three possible parts. Similarly, there should be three possible effects in a SIS junction: the tunneling of single electron, the tunneling of single pair, and the pair-forming following the pair-breaking. This paper will discuss these problems and present a possible temperature control DC switch effect between two superconductors.

  13. Multi-terminal Subsystem Model Validation for Pacific DC Intertie

    SciTech Connect (OSTI)

    Yang, Bo; Huang, Zhenyu; Kosterev, Dmitry

    2008-07-20

    this paper proposes to validate dynamic model of Pacific DC Intertie with the concept of hybrid simulation by combing simulation with PMU measurements. The Playback function available in GE PSLF is adopted for hybrid simulation. It is demonstrated for the first time the feasibility of using Playback function on multi-terminal subsystem. Sensitivity studies are also presented as a result of common PMU measurement quality problem, ie, offset noise and time synchronization. Results indicate a good tolerance of PDCI model generally. It is recommended that requirements should apply to phasor measurements in model validation work to ensure better analysis. Key parameters are identified based on impact of value change to model behavior. Two events are employed for preliminary model validation with PMU measurements. Suggestions are made for PDCI model validation work in the future.

  14. Effect of DC voltage pulses on memristor behavior.

    SciTech Connect (OSTI)

    Evans, Brian R.

    2013-10-01

    Current knowledge of memristor behavior is limited to a few physical models of which little comprehensive data collection has taken place. The purpose of this research is to collect data in search of exploitable memristor behavior by designing and implementing tests on a HP Labs Rev2 Memristor Test Board. The results are then graphed in their optimal format for conceptualizing behavioral patterns. This series of experiments has concluded the existence of an additional memristor state affecting the behavior of memristors when pulsed with positively polarized DC voltages. This effect has been observed across multiple memristors and data sets. The following pages outline the process that led to the hypothetical existence and eventual proof of this additional state of memristor behavior.

  15. Auxiliary quasi-resonant dc tank electrical power converter

    DOE Patents [OSTI]

    Peng, Fang Z.

    2006-10-24

    An auxiliary quasi-resonant dc tank (AQRDCT) power converter with fast current charging, voltage balancing (or charging), and voltage clamping circuits is provided for achieving soft-switched power conversion. The present invention is an improvement of the invention taught in U.S. Pat. No. 6,111,770, herein incorporated by reference. The present invention provides faster current charging to the resonant inductor, thus minimizing delay time of the pulse width modulation (PWM) due to the soft-switching process. The new AQRDCT converter includes three tank capacitors or power supplies to achieve the faster current charging and minimize the soft-switching time delay. The new AQRDCT converter further includes a voltage balancing circuit to charge and discharge the three tank capacitors so that additional isolated power supplies from the utility line are not needed. A voltage clamping circuit is also included for clamping voltage surge due to the reverse recovery of diodes.

  16. Materials with low DC magnetic susceptibility for sensitive magnetic measurements R. Khatiwada,1, 2, 3,

    E-Print Network [OSTI]

    Materials with low DC magnetic susceptibility for sensitive magnetic measurements R. Khatiwada,1, 2 (Dated: July 1, 2015) Materials with very low DC magnetic susceptibility have many scientific a totally nonmagnetic material. This phrase in our case means after spatially averaging over macroscopic

  17. Nonlinear Dust Acoustic Waves, Shocks and Stationary Structures in a DC Glow Discharge Dusty Plasma

    E-Print Network [OSTI]

    Merlino, Robert L.

    Nonlinear Dust Acoustic Waves, Shocks and Stationary Structures in a DC Glow Discharge Dusty Plasma drifting dusty plasmas and temporal dust acoustic wave growth Phys. Plasmas 18, 113706 (2011) Modulational;Nonlinear Dust Acoustic Waves, Shocks and Stationary Structures in a DC Glow Discharge Dusty Plasma Robert L

  18. DC WRRC Report No. 178 AN EXPERIMENTAL STUDY OF THE OPTIMAL THICKNESS OF A SAND

    E-Print Network [OSTI]

    District of Columbia, University of the

    FILTER WATER QUALITY STRUCTURE July 1994 D.C. Water Resources Research Center University of the District OF THE OPTIMAL THICKNESS OF A SAND LAYER IN A SAND FILTER WATER QUALITY STRUCTURE Submitted by: Farshad Amini THICKNESS OF A SAND LAYER IN A SAND FILTER WATER QUALITY STRUCTURE July 1994 D.C. Water Resources Research

  19. EE443L: Intermediate Control Lab Lab2: Modeling a DC motor

    E-Print Network [OSTI]

    Wedeward, Kevin

    EE443L: Intermediate Control Lab Lab2: Modeling a DC motor Introduction: In this lab we will develop and validate a basic model of a permanent magnet DC motor (Yaskawa Electric, Mini-series, Minertia motor). The specific input/output relationship, which we are interested in determining, is the manner

  20. www.sciencemag.org/cgi/content/full/342/6155/224/DC1 Supplementary Materials for

    E-Print Network [OSTI]

    McEuen, Paul L.

    www.sciencemag.org/cgi/content/full/342/6155/224/DC1 Supplementary Materials for Imaging Atomic the following: (available at www.sciencemag.org/cgi/content/full/342/6155/224/DC1) Movies S1 to S5 #12;2 Materials and Methods Transmission electron microscopy (TEM )Imaging Transmission electron microscopy (TEM

  1. Aalborg Universitet Intelligent DC Microgrid Living Laboratories -A Chinese-Danish Project

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Intelligent DC Microgrid Living Laboratories - A Chinese-Danish Project Diaz Microgrid Living Laboratories - A Chinese-Danish Project. In IEEE ICDCM 2015. IEEE Press. General rights.aau.dk on: juli 07, 2015 #12;Intelligent DC Microgrid Living Laboratories - A Chinese-Danish Project Enrique

  2. A Scalable DC Microgrid Architecture for Rural Electrification in Emerging Regions

    E-Print Network [OSTI]

    Sanders, Seth

    A Scalable DC Microgrid Architecture for Rural Electrification in Emerging Regions P. Achintya the design and experimental validation of a scalable dc microgrid architecture for rural electrification. The microgrid design has been driven by field data collected from Kenya and India. The salient features

  3. Aalborg Universitet Distributed Consensus-Based Control of Multiple DC-Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Distributed Consensus-Based Control of Multiple DC-Microgrids Clusters Shafiee). Distributed Consensus-Based Control of Multiple DC-Microgrids Clusters. In Proceedings of the 40th Annual.aau.dk on: juli 05, 2015 #12;This document downloaded from www.microgrids.et.aau.dk is a preprint

  4. Zeroing Transformer's DC Current in Resonant Converters with No Series Capacitors

    E-Print Network [OSTI]

    Gertsman, Student Member, IEEE and Sam Ben-Yaakov ,Fellow, IEEE Power Electronics Laboratory Department: www.ee.bgu.ac.il/~pel Abstract - DC current unbalance in the windings of a transformer may initiate the transformer's DC current to zero by correcting the asymmetry of the drive. This balancing control

  5. Aalborg Universitet Distributed Bus Signaling Control for a DC Charging Station with Multi Paralleled

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    been reported in order to verify the validity of proposed approach. Keywords--EV charging; flywheelAalborg Universitet Distributed Bus Signaling Control for a DC Charging Station with Multi., & Savaghebi, M. (2015). Distributed Bus Signaling Control for a DC Charging Station with Multi Paralleled

  6. Genomic Plasticity Enables Phenotypic Variation of Pseudomonas syringae pv. tomato DC3000

    E-Print Network [OSTI]

    Myers, Chris

    Genomic Plasticity Enables Phenotypic Variation of Pseudomonas syringae pv. tomato DC3000 Zhongmeng of a genomic anomaly in the region of 4.7 to 4.9 Mb of the Pseudomonas syringae pv. tomato (Pst) DC3000 genome in P. syringae. Citation: Bao Z, Stodghill PV, Myers CR, Lam H, Wei H-L, et al. (2014) Genomic

  7. The Data Center (DC) Genome project is a collaborative effort with Microsoft Research

    E-Print Network [OSTI]

    Amir, Yair

    DC Genome The Data Center (DC) Genome project is a collaborative effort with Microsoft Research the efficiency of data center operations and thus minimize their environmental impact. Data center energy about carbon footprints and climate change. Lack of visibility into the data center's operating

  8. DC Discharge Studies Using PIC-MCC Jeff Hammel and John Verboncoeur

    E-Print Network [OSTI]

    Wurtele, Jonathan

    DC Discharge Studies Using PIC-MCC Jeff Hammel and John Verboncoeur March 31, 2004 1 Introduction (PIC-MCC) method. PIC-MCC is used to accurately model kinetic processes present in DC discharges PIC. Cross-validation of PIC-MCC simulation and analysis may be used to improved both computational

  9. D.C. Community Comes Together in the Name of Sustainability, Affordability

    Broader source: Energy.gov [DOE]

    The New School for Design and Stevens Institute of Technology 2011 Solar Decathlon team is partnering with D.C. community members and Habitat for Humanity to build an energy efficient home that will be moved to the Deanwood neighborhood of Washington, D.C. following the competition.

  10. Reid Rosnick/DC/USEPA/US 10/25/2012 11:54 AM

    E-Print Network [OSTI]

    Management and Regulations Washington, DC phone: 202-343-9186 email: egidi.philip@epa.gov cell: 970 Washington, DC phone: 202-343-9186 email: egidi.philip@epa.gov cell: 970-209-2885 Reid Rosnick---10! ------------------------------------------------------------------------------------------------------ -------- Reid J. Rosnick Radiation Protection Division (6608J) U.S. Environmental Protection Agency 1200

  11. Parametric Study of PV Arc-Fault Generation Methods and Analysis of Conducted DC Spectrum

    E-Print Network [OSTI]

    Parametric Study of PV Arc-Fault Generation Methods and Analysis of Conducted DC Spectrum Jay photovoltaic (PV) direct current (DC) arc- fault detectors use the frequency content of the PV system to detect by different PV arcs in the field. In this investigation, we (a) discuss the differences in establishing

  12. Adaptive Selective Harmonic Minimization Based on ANNs for Cascade Multilevel Inverters With Varying DC Sources

    SciTech Connect (OSTI)

    Filho, Faete [ORNL; Maia, Helder Z [UFMS, Department of Electrical Engineering; Mateus, Tiago Henrique D [ORNL; Ozpineci, Burak [ORNL; Tolbert, Leon M [ORNL; Pinto, Joao Onofre P [ORNL

    2013-01-01

    A new approach for modulation of an 11-level cascade multilevel inverter using selective harmonic elimination is presented in this paper. The dc sources feeding the multilevel inverter are considered to be varying in time, and the switching angles are adapted to the dc source variation. This method uses genetic algorithms to obtain switching angles offline for different dc source values. Then, artificial neural networks are used to determine the switching angles that correspond to the real-time values of the dc sources for each phase. This implies that each one of the dc sources of this topology can have different values at any time, but the output fundamental voltage will stay constant and the harmonic content will still meet the specifications. The modulating switching angles are updated at each cycle of the output fundamental voltage. This paper gives details on the method in addition to simulation and experimental results.

  13. Conference Registration Form 1. PARTICIPANT INFORMATION (Print or Type)

    E-Print Network [OSTI]

    Sin, Peter

    Conference Registration Form 1. PARTICIPANT INFORMATION (Print or Type) Last Name Fax Mailing. REGISTRATION FEES *** Rates for Pre-Conference Workshop apply to both members and non-members Print Form Save Email #12;Conference Registration Form Name of Participant 3. PAYMENT SUMMARY Pre-Conference Workshop

  14. Chemical technology news from across RSC Publishing. Printing solar panels

    E-Print Network [OSTI]

    Rogers, John A.

    Publishing Chemical technology news from across RSC Publishing. Printing solar panels 22 January size) silicon microcells that connect together to form flexible solar panels. By stamping hundreds solar panels 2/8/2010http://www.rsc.org/Publishing/ChemTech/Volume/2010/02/printing_solar.asp #12;Page 2

  15. Inkjet-printed Sensors on Paper Substrate for Agricultural Applications

    E-Print Network [OSTI]

    Tentzeris, Manos

    . Tentzeris School of Electrical and Computer Engineeing, Georgia Institute of Technology, GA, USA CNRS to lower the cost of the inkjet-printed electronics. The electrical properties of inkjet-printed silver. It is also one of the cheapest material in the world as well as decomposes completely in nature. Plus

  16. Fabrication of asymmetrically coated colloid particles by microcontact printing techniques

    E-Print Network [OSTI]

    Velev, Orlin D.

    Janus particles,4 non-spherical shaped ``acorn'' particles5,6 and unsymmetrical 3D macromoleculesFabrication of asymmetrically coated colloid particles by microcontact printing techniques Olivier particles by using a microcontact printing technique. Films of water-insoluble ionic surfactants deposited

  17. 3D PRINTING FOR INTELLIGENT METALLIC STRUCTURES M. Strantza1

    E-Print Network [OSTI]

    Boyer, Edmond

    3D PRINTING FOR INTELLIGENT METALLIC STRUCTURES M. Strantza1 , D. De Baere2 , M. Rombouts3 , SSHM system is produced by 3D printing or additive manufacturing. Additive Manufacturing (AM) is a "process to enable its implementation. This work demonstrates the feasibility study of eSHM systems produced by 3D

  18. PAPILLON: Designing Curved Display Surfaces With Printed Optics

    E-Print Network [OSTI]

    Poupyrev, Ivan

    manufac- tured as arbitrary 3D shapes. Flexible displays, such as or- ganic light emitting displays (OLED. It is based on 3D printed optics, where the surface of the display is constructed as a bundle of printed light elements also direct light from the surface of the display back to the image sensor allowing for touch

  19. Narrating Washington, D.C. from the Margins: Urban Space and Cultural Identity in "Lost in the City" and "The Beautiful Things that Heaven Bears"

    E-Print Network [OSTI]

    Brown, Jessica M

    2011-01-01

    and Urban Space in Washington, D.C. Chicago: University ofBrookings Institution. Washington, D.C. Gillette, Howard Jr.of Urban Policy in Washington, D.C. (2006). Baltimore: The

  20. Proceedings of WindPower 95, AWEA, Washington, D.C., 1995. FATIGUE DAMAGE ESTIMATE COMPARISONS FOR

    E-Print Network [OSTI]

    Proceedings of WindPower 95, AWEA, Washington, D.C., 1995. FATIGUE DAMAGE ESTIMATE COMPARISONS," Proceedings of WindPower `95, AWEA, Washington, DC, March, 1995, pp. 177-186. * This work is supported

  1. Insertion sequence 5 at various upstream locations of the flhDC operon causes Escherichia coli hyper motility

    E-Print Network [OSTI]

    Wang, Jing

    2010-01-01

    locations of the flhDC operon causes Escherichia coli Hyperlocations of the PflhDC operon causes Escherichia coli Hyperof the transposing segment causes the formation of co-

  2. SolarPrint | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc JumpHeter Battery TechnologySocovoltaicCorporationTechnology IncSolarPrint

  3. Toppan Printing Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop Inc JumpHeterInformation PolicyTinna GroupToppan Printing Co Ltd Jump to:

  4. Computational Light Routing: 3D Printed Optical Fibers For Sensing and Display

    E-Print Network [OSTI]

    applications. Printing optical fibers is made possible by modern multi-material 3D printers. We print twoComputational Light Routing: 3D Printed Optical Fibers For Sensing and Display THIAGO PEREIRA or restrict themselves to light dif- fusion in volumes. We use multi-material 3D printing to fabricate objects

  5. Evaluation of PC-ISO for customized, 3D printed, gynecologic 192Ir HDR brachytherapy applicators

    E-Print Network [OSTI]

    2015-01-01

    biocompatible, thermoplastic, 3D printing material, for useterpolymers family of thermoplastics that are made of three

  6. Hot Melt Inks for 3D Printing Veronika Chovancova*, Alexandra Pekarovicova* and Paul D. Fleming III

    E-Print Network [OSTI]

    Fleming, Paul D. "Dan"

    Hot Melt Inks for 3D Printing Veronika Chovancova*, Alexandra Pekarovicova* and Paul D. Fleming III for 3D printing comprises different waxes, tackifier and plasticizer resins, rheology modifiers, and UV rheological (or flow) behavior. 1 3D printing, direct ink-jet printing, and related approaches such as hot

  7. Electrical characteristics of Harwell 7000 series dataway (Multilayer printed circuit board type 94/40148-6)

    E-Print Network [OSTI]

    Hale, F H

    1970-01-01

    Electrical characteristics of Harwell 7000 series dataway (Multilayer printed circuit board type 94/40148-6)

  8. 1620 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 27, NO. 3, JULY 2012 Hybrid AC/DC Transmission Expansion Planning

    E-Print Network [OSTI]

    Fu, Yong

    1620 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 27, NO. 3, JULY 2012 Hybrid AC/DC Transmission--This paper proposes a hybrid algorithm for the ac/dc transmission expansion planning (TEP). The stochastic simulation method would consider random outages of generating units and ac/dc transmission lines as well

  9. DC switching regulated power supply for driving an inductive load

    DOE Patents [OSTI]

    Dyer, George R. (Norris, TN)

    1986-01-01

    A power supply for driving an inductive load current from a dc power supply hrough a regulator circuit including a bridge arrangement of diodes and switching transistors controlled by a servo controller which regulates switching in response to the load current to maintain a selected load current. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. The regulator may be operated in three "stages" or modes: (1) For current runup in the load, both first and second transistor switch arrays are turned "on" and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned "off", and load current "flywheels" through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays "off", allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load. The three operating states are controlled automatically by the controller.

  10. A Very Low-Luminosity, Very Cool, DC White Dwarf

    E-Print Network [OSTI]

    Hugh Harris; Conard Dahn; Frederick Vrba; Arne Henden; James Liebert; Gary Schmidt; Neill Reid

    1999-06-03

    The star LHS 3250 is found to be a white dwarf at a distance of 30 pc. Its absolute magnitudes (M_V = 15.72; M_bol = 16.2) put it among the least-luminous white dwarfs known. Its optical spectrum shows no features, indicating it has a DC classification, and it shows no detectable polarization, indicating it does not have a very strong magnetic field. However, its broadband colors show it to have a unique spectral energy distribution, and it stands out from all other stars in BVI and other broadband photometric surveys. We discuss these properties, and conclude that LHS 3250 must be an extremely cool white dwarf with strong collision-induced absorption at red-infrared wavelengths from molecular hydrogen, in accord with models for very cool white dwarf atmospheres. If so, it is the first such star known, and the first star to provide observational evidence supporting these models. It suggests that other very cool white dwarfs, both halo white dwarfs and the oldest disk white dwarfs, also may have colors affected by similar absorption. The atmospheric composition of LHS 3250 is not known, and therefore its temperature is poorly determined. It may be a helium-core star with a mass 0.3-0.45 M_solar and a product of mass-transfer in a close binary system. However, until its temperature is better known, its mass and age remain uncertain.

  11. Suitability for 3D Printed Parts for Laboratory Use

    SciTech Connect (OSTI)

    Zwicker, Andrew P.; Bloom, Josh; Albertson, Robert; Gershman, Sophia

    2014-08-01

    3D printing has become popular for a variety of users, from industrial to the home hobbyist, to scientists and engineers interested in producing their own laboratory equipment. In order to determine the suitability of 3D printed parts for our plasma physics laboratory, we measured the accuracy, strength, vacuum compatibility, and electrical properties of pieces printed in plastic. The flexibility of rapidly creating custom parts has led to the 3D printer becoming an invaluable resource in our laboratory and is equally suitable for producing equipment for advanced undergraduate laboratories.

  12. DC Pro Software Tool Suite, Data Center Fact Sheet, Industrial Technologies Program

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  13. DC-OPF Formulation with Price-Sensitive Demand Bids Junjie Sun and Leigh Tesfatsion

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    DC-OPF Formulation with Price-Sensitive Demand Bids Junjie Sun and Leigh Tesfatsion Last Revised (TNCS) subject to various transmission constraints. As explained at length in Sun and Tesfation (2007

  14. ReHABit : claiming endangered structures in Washington DC to rethink subsidized housing

    E-Print Network [OSTI]

    Fowlkes, Catherine Kuhnle

    2007-01-01

    There is an affordable housing crisis today in Washington D.C. that is the result of a uniquely complicated history of a capital city and a current economic boom. This thesis responds to that crisis by proposing a new ...

  15. Dielectric relaxation and conduction in SrTiO{sub 3} thin films under dc bias

    SciTech Connect (OSTI)

    Ang, Chen; Yu, Zhi; Cross, L. E.; Guo, Ruyan; Bhalla, A. S.

    2001-08-06

    The dielectric and conduction behavior of SrTiO{sub 3} thin films deposited on a SrTiO{sub 3} single-crystal substrate is studied. Without dc bias, an obvious dielectric 'defect mode' in the dielectric loss is observed in the temperature range of {approx}100--200 K; however, no noticeable corresponding dielectric constant peak is observed. By applying a high dc bias ({>=}40 kV/cm), a dielectric constant peak with frequency dispersion appears in the same temperature range, the dielectric loss is increased, and simultaneously high dc conduction is observed. The induced dielectric constant peak is related to dc conduction and attributed to the coupling effect of the mobile carriers with the dielectric defect mode. {copyright} 2001 American Institute of Physics.

  16. DC power transmission from the Leningradskaya Nuclear Power Plant to Vyborg

    SciTech Connect (OSTI)

    Koshcheev, L. A.; Shul'ginov, N. G.

    2011-05-15

    DC power transmission from the Leningradskaya Nuclear Power Plant (LAES) to city of Vyborg is proposed. This will provide a comprehensive solution to several important problems in the development and control of the unified power system (EES) of Russia.

  17. New AC-DC Power Factor Correction Architecture Suitable for High Frequency Operation

    E-Print Network [OSTI]

    Lim, Seungbum

    This paper presents a novel ac-dc power factor correction (PFC) power conversion architecture for single-phase grid interface. The proposed architecture has significant advantages for achieving high efficiency, good power ...

  18. Vehicle Technologies Office Merit Review 2014: High Performance DC Bus Film Capacitor

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by GE Global Research at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

  19. Vehicle Technologies Office Merit Review 2015: High Performance DC Bus Film Capacitor

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by GE Global Research at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

  20. Multilevel-Dc-Bus Inverter For Providing Sinusoidal And Pwm Electrical Machine Voltages

    DOE Patents [OSTI]

    Su, Gui-Jia [Knoxville, TN

    2005-11-29

    A circuit for controlling an ac machine comprises a full bridge network of commutation switches which are connected to supply current for a corresponding voltage phase to the stator windings, a plurality of diodes, each in parallel connection to a respective one of the commutation switches, a plurality of dc source connections providing a multi-level dc bus for the full bridge network of commutation switches to produce sinusoidal voltages or PWM signals, and a controller connected for control of said dc source connections and said full bridge network of commutation switches to output substantially sinusoidal voltages to the stator windings. With the invention, the number of semiconductor switches is reduced to m+3 for a multi-level dc bus having m levels. A method of machine control is also disclosed.

  1. Development and evaluation of an implantable chronic DC stimulation and measurement probe for nerve regeneration studies 

    E-Print Network [OSTI]

    Macha, Douglas Bryan

    1995-01-01

    isotropic. The actual field strength or current density induced by the applied current is seldom directly measured in-vivo. This research seeks to evaluate the design of an implantable DC stimulator capable of delivering a constant, stable and measurable...

  2. DC Discharge Studies Using PIC-MCC: PIC Simulations Jeff Hammel & John Verboncoeur

    E-Print Network [OSTI]

    Wurtele, Jonathan

    DC Discharge Studies Using PIC-MCC: PIC Simulations Jeff Hammel & John Verboncoeur Electronics PIC Simulations (XPDP1) XPDP1, a 1D-3V PIC-MCC code (Verboncoeur et al., 1993), was used to simu- late

  3. Modeling of D/C motor driven synthetic jet acutators for flow separation control 

    E-Print Network [OSTI]

    Balasubramanian, Ashwin Kumar

    2004-11-15

    The objective of this research is to present a theoretical study of the compressibility effects on the performance of an electric D/C motor driven synthetic jet actuator for flow separation control. Hot wire anemometer experiments were conducted...

  4. Low speed control of a DC motor driving a mechanical system with fuzzy adaptive compensation 

    E-Print Network [OSTI]

    Hyun, Dongyoon

    1997-01-01

    A fuzzy adaptive feedforward control scheme in conjunction with classical feedback control is proposed for the low speed control of DC motors driving mechanical systems in the presence of friction. In the fuzzy adaptive scheme, a fuzzy logic based...

  5. Grid Modernization Highlighted in Washington DC in September with the Solar Decathlon

    Broader source: Energy.gov [DOE]

    Smart Grid is on display at the U.S. Department of Energy 2011 Solar Decathlon, held September 23 through October 2 on the National Mall, West Potomac Park, Washington, DC.  The decathlon...

  6. Area Efficient D/A Converters For Accurate DC Operation Brandon Royce Greenley

    E-Print Network [OSTI]

    Moon, Un-Ku

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 6.2 Mismatch Modeling For Area Optimization . . . . . . . . . . . . . . . . . . . . . . . 51 6Area Efficient D/A Converters For Accurate DC Operation by Brandon Royce Greenley A THESIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 5.1 Measurement Setup

  7. Assessment of Soil Erosion at a DC Park Facility Spring Valley Park

    E-Print Network [OSTI]

    District of Columbia, University of the

    park for the pilot assessment study. Failure to control erosion caused by the runoff of rain water can of Columbia Date: May 2005 Prepared for the DC Water Resources Research Institute Funded by USGS through

  8. Gaseous and particulate emissions from a DC arc melter

    SciTech Connect (OSTI)

    Overcamp, T.J.; Speer, M.P.; Griner, S.J.; Cash, D.M. [Clemson Univ., Anderson, SC (United States)

    1997-12-31

    This paper presents the results of the gaseous and particulate emissions from eight experimental tests of a DC arc melter to treat simulated Savannah River soils contaminated with metals, surrogates for radionuclides, and organic debris. The gaseous analyses reported on the concentrations of oxygen, hydrogen, carbon monoxide, carbon dioxide, hydrogen, methane, nitric oxide, and nitrogen dioxide. The carbon dioxide concentration was high for all runs. For the runs with an air purge, the carbon monoxide concentration ranged up to 10% in the runs with the debris and 2% in the runs without debris. Hydrogen ranged up to 5% by with debris and up to 1% without debris. The methane concentration ranged up to 7,000 ppm{sub v} for the runs with debris and 2,000 ppm for the runs without debris. With a nitrogen purge, oxygen concentrations were less than 1%. The carbon dioxide concentrations ranged from 3 to 15%. Much of this carbon dioxide was probably due the carbonates added to the feed material. The carbon monoxide concentration ranged up to 20% with the debris and 7% without debris. Hydrogen was above 6% in with debris and up to 6% without debris. The methane concentration ranged up to 10,000 ppm{sub v} with debris and 4,000 ppm{sub v} without debris. The particulate concentrations exiting ranged from 32 to 145 g/m{sup 3}. From the chemical analyses, the primary elements were silicon and calcium. The CHN analyses indicated that carbon, probably as carbonates, are an additional component in the particulate matter. The estimated emissions were at a level of 3% or less for cerium, up to 7% for nickel, and 11 to 30% for cesium.

  9. Beyond 3D Printing: The New Dimensions of Additive Fabrication

    E-Print Network [OSTI]

    Keating, Steven John

    Additive fabrication, often referred to as 3D printing, is the construction of objects by adding material. This stands in contrast to subtractive methods, which involve removing material by means of milling or cutting. ...

  10. 3D-Printed Car by Local Motors- The Strati

    Broader source: Energy.gov [DOE]

    A timelapse video of the production process behind The Strati - the 3D-printed car by Local Motors, which manufactured with Oak Ridge National Laboratory (ORNL) and delivered at the International Manufacturing Technology Show (IMTS) in September of 2014.

  11. Dispenser Printed Zinc Microbattery with an Ionic Liquid Gel Electrolyte

    E-Print Network [OSTI]

    Ho, Christine Chihfan

    2010-01-01

    the energy storage capacity. Since 3D silicon morphologiesenergy storage device on the substrate area surrounding MEMS vibration energy harvesters that were microfabricated onto a siliconsilicon die. (b-d) The dispenser printer deposits a multilayer printed energy storage

  12. Direct printing of lead zirconate titanate thin films

    E-Print Network [OSTI]

    Bathurst, Stephen, 1980-

    2008-01-01

    Thus far, use of lead zirconate titanate (PZT) in MEMS has been limited due to the lack of process compatibility with existing MEMS manufacturing techniques. Direct printing of thin films eliminates the need for photolithographic ...

  13. 3D printing rises to the occasion | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3D printing rises to the occasion ORNL group shows how it's done, one layer at a time A perforated metal box produced by an Arcam 3D printer. This detailed A perforated metal box...

  14. Active Printed Materials for Complex Self-Evolving Deformations

    E-Print Network [OSTI]

    Zhao, Wei

    We propose a new design of complex self-evolving structures that vary over time due to environmental interaction. In conventional 3D printing systems, materials are meant to be stable rather than active and fabricated ...

  15. 2013 Santa Sleigh 3D Printing Winner | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineers Pick Winner of 2013 Santa Sleigh 3D Printing Design Contest Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share...

  16. Instructions to Print Monthly P-card Statement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to Print Monthly P-card Statement 1. Go to Website https:gov1.paymentnet.com and login with your Organization ID, User ID and Pass Phrase. Organization ID is doe0001. User ID and...

  17. Power, politics, and prints : redefining art practice in Oaxaca City

    E-Print Network [OSTI]

    Gibson, Hannah Peterkort

    2011-01-01

    camp. Movements such as pop art or new media art have28. nonetheless. While pop-art was based on challengingArts 16 Tallman, Susan. The Contemporary Print: from Pre-Pop

  18. Tungsten carbide-cobalt by Three Dimensional Printing

    E-Print Network [OSTI]

    Kelley, Andrew, III

    1998-01-01

    Three Dimensional Printing is an additive manufacturing process for rapid prototyping ceramic and metallic parts [Sachs, et al, 1990]. Green (not sintered) tungsten carbide-cobalt parts must have a density greater than 50% ...

  19. Printing a Car: A Team Effort in Innovation

    Broader source: Energy.gov [DOE]

    Oak Ridge National Lab's work with Local Motors to build a 3D-printed car was highlighted at the International Manufacturing Technology Show (IMTS) in September 2014 with a live demonstration.

  20. Europe / Brussels briefing Print article | Email article Brussels agenda

    E-Print Network [OSTI]

    Europe / Brussels briefing Print article | Email article Brussels agenda By our Brussels staff commissioner, will relaunch the Europe Direct helpline, as part of a drive to bring the bloc "closer" to its

  1. Abstract--A novel control scheme for improving the power efficiency of low-voltage DC-DC converters for battery-powered,

    E-Print Network [OSTI]

    Rincon-Mora, Gabriel A.

    -DC converters for battery-powered, portable applications is presented. In such applications, light- load efficiency is crucial for extending battery life, since mobile devices operate in stand-by mode for most-of-the-art techniques. As a result, the battery life in a typical DSP microprocessor application is improved by 7

  2. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    SciTech Connect (OSTI)

    Garbesi, Karina; Vossos, Vagelis; Sanstad, Alan; Burch, Gabriel

    2011-10-13

    An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the ‘direct-DC house’ with respect to today’s typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate. While direct-DC for residential applications will most likely arise as a spin-off of developments in the commercial sector—because of lower barriers to market entry and larger energy benefits resulting from the higher coincidence between load and insolation—this paper demonstrates that there are substantial benefits in the residential sector as well. Among residential applications, space cooling derives the largest energy savings from being delivered by a direct-DC system. It is the largest load for the average residence on a national basis and is particularly so in high-load regions. It is also the load with highest solar coincidence.

  3. One-dimensional hybrid simulation of the dc/RF combined driven capacitively coupled CF{sub 4} plasmas

    SciTech Connect (OSTI)

    Wang Shuai [School of Science, Northeastern University, Shenyang 110891 (China); Xu Xiang; Wang Younian [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

    2012-11-15

    We developed a one-dimensional hybrid model to simulate the dc/RF combined driven capacitively coupled plasma for CF{sub 4} discharges. The numerical results show the influence of the dc source on the plasma density distribution, ion energy distributions (IEDs), and ion angle distributions (IADs) on both RF and dc electrodes. The increase of dc voltage impels more ions with high energy to the electrode applied to the dc source, which makes the IEDs at the dc electrode shift toward higher energy and the peaks in IADs shift toward the small angle region. At the same time, it also decreases ion-energy at the RF electrode and enlarges the ion-angles which strike the RF electrode.

  4. Performance Study of K2CsSb Photocathode inside a DC High Voltage Gun

    SciTech Connect (OSTI)

    T. Rao, J. Smedley, J.M. Grames, R. Mammei, J.L. McCarter, M. Poelker, R. Suleiman

    2011-03-01

    In the past decade, there has been considerable interest in the generation of tens of mA average current in a photoinjector. Until recently, GaAs:Cs cathodes and K2CsSb cathodes have been tested successfully in DC and RF injectors respectively for this application. Our goal is to test the GaAs:Cs in RF injector and the K2CsSb cathode in the DC gun in order to widen our choices. Since the multialkali cathode is a compound with uniform stochiometry over its entire thickness, we anticipate that the life time issues seen in GaAs:Cs due surface damage by ion bombardment would be minimized with this material. Hence successful operation of the K2CsSb cathode in DC gun could lead to a relatively robust electron source capable of delivering ampere level currents. In order to test the performance of K2CsSb cathode in a DC gun, we have designed and built a load lock system that would allow the fabrication of the cathode at BNL and its testing at JLab. In this paper, we will present the design of the load-lock system, cathode fabrication, and the cathode performance in the preparation chamber and in the DC gun.

  5. Performance Study of K2CsSb Photocathode Inside a DC High Voltage Gun

    SciTech Connect (OSTI)

    McCarter J. L.; Rao T.; Smedley, J.; Grames, J.; Mammei, R.; Poelker, M.; Suleiman, R.

    2011-09-01

    In the past decade, there has been considerable interest in the generation of tens of mA average current in a photoinjector. Until recently, GaAs:Cs cathodes and K{sub 2}CsSb cathodes have been tested successfully in DC and RF injectors respectively for this application. Our goal is to test the K{sub 2}CsSb photocathode inside a DC gun. Since the multialkali cathode is a compound with constant characteristics over its entire thickness, we anticipate that the lifetime issues seen in GaAs:Cs due to surface damage by ion bombardment would be minimized. Hence successful operation of the K{sub 2}CsSb cathode in a DC gun could lead to a relatively robust electron source capable of delivering ampere level currents. In order to test the performance of a K{sub 2}CsSb cathode in a DC gun, we have designed and built a load lock system that allows the fabrication of the cathode at Brookhaven National Lab (BNL) and its testing at Jefferson Lab (JLab). In this paper, we will present the performance of the K{sub 2}CsSb photocathode in the preparation chamber and in the DC gun.

  6. Print-and-Peel Fabrication for Microfluidics: What’s in it for Biomedical Applications?

    E-Print Network [OSTI]

    Thomas, Marlon S.; Millare, Brent; Clift, Joseph M.; Bao, Duoduo; Hong, Connie; Vullev, Valentine I.

    2010-01-01

    Solid-object printers have the capability for 3D printing,single-step 3D molding without a solid-object printer. 33,763D) printing of masters using a solid-object printer.

  7. Precision control of cylindrical stamp contact in a continuous roll-to-roll microcontact printing machine

    E-Print Network [OSTI]

    Libert, Adam M. (Adam Marcus)

    2014-01-01

    Microcontact printing is a form of soft lithography that uses a molded elastomeric stamp to print patterns with micron and sub-micron scale features. This is an effective low-cost technique for replicating master patterns ...

  8. Using 3D Printing to Redesign Santa's Sleigh | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In the past, we've utilized GE technology to redesign Santa's Sleigh and have asked our additive manufacturing researchers to design and print 3D printed Christmas tree...

  9. Toward Nanoscale Three-Dimensional Printing: Nanowalls Built of Electrospun Nanofibers

    E-Print Network [OSTI]

    Kim, Ho-Young

    . This novel 3D printing scheme can be applied to the development of various 3D nanoscale objects including manufacturing for several decades.1 So- called 3D printing is reaching a stage where the desired products can

  10. 3-D Printed Electrically and Optically Paced Skeletal Muscle Based Biological Machines Caroline Cvetkovic, Bioengineering

    E-Print Network [OSTI]

    Kilian, Kristopher A.

    3-D Printed Electrically and Optically Paced Skeletal Muscle Based Biological Machines Caroline Research Aims and Goals · To use 3D printing technologies to fabricate the structure of the biological

  11. Analysis of the capabilities of continuous high-speed microcontact printing

    E-Print Network [OSTI]

    Khanna, Kanika

    2008-01-01

    Microcontact printing uses elastomeric stamps to transfer ink onto a substrate by the process of self-assembly. It has the capability to print features as small as 200nm over large areas. Because of this it has many potential ...

  12. Design and analysis of high-speed continuous micro-contact printing

    E-Print Network [OSTI]

    Shen, Xiao, M. Eng. Massachusetts Institute of Technology

    2008-01-01

    Micro-contact printing ([mu]CP) is a technology that prints directly off a patterned elastomeric stamp by transferring only a molecular monolayer of ink to a surface, providing a low-cost, high resolution and widely ...

  13. Design and manufacturing of high precision roll-to-roll multilayer printing machine -- machine upgrade

    E-Print Network [OSTI]

    Zhu, Yufei

    2009-01-01

    In 2008, a group of MIT Master of Engineering students built a roll to roll machine for printing thiol onto a flexible gold substrate by self-assembly. The machine demonstrated good performance in high speed printing (400 ...

  14. Photo Gallery: 3D Printing Brings Classic Shelby Cobra to Life...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photo Gallery: 3D Printing Brings Classic Shelby Cobra to Life Photo Gallery: 3D Printing Brings Classic Shelby Cobra to Life April 15, 2015 - 4:02pm Addthis Zero to 60 in under...

  15. Evaporative printing of organic materials and metals and development of organic memories

    E-Print Network [OSTI]

    Kang, Sung Hoon, 1974-

    2004-01-01

    The advantages of directed printing make it the ideal fabrication tool for the ubiquitous electronic technologies of the future. However, direct printing techniques such as ink-jet technology, are currently limited to ...

  16. ANU Library | anulib.anu.edu.au October 2013 ANU Print Repository request service

    E-Print Network [OSTI]

    Journals, books and pamphlets held in the ANU Print Repository are available for loan in accordance and pamphlets held in the ANU Print Repository may be requested. The copyright declaration must be completed

  17. Impact of 3D printing on global supply chains by 2020

    E-Print Network [OSTI]

    Bhasin, Varun

    2014-01-01

    This thesis aims to quantitatively estimate the potential impact of 3D Printing on global supply chains. Industrial adoption of 3D Printing has been increasing gradually from prototyping to manufacturing of low volume ...

  18. Understanding Wax Printing: A Simple Micropatterning Process for Paper-Based

    E-Print Network [OSTI]

    Prentiss, Mara

    Understanding Wax Printing: A Simple Micropatterning Process for Paper-Based Microfluidics Emanuel a detailed study on wax printing, a simple and inexpensive method for fabricating microfluidic devices in paper using a commercially avail- able printer and hot plate. The printer prints patterns of solid wax

  19. Edit: Study -APP Save | Exit | Hide/Show Errors | Print... | Jump To

    E-Print Network [OSTI]

    Biederman, Irving

    Edit: Study - APP Save | Exit | Hide/Show Errors | Print... | Jump To: 01. Project Guidance Save | Exit | Hide/Show Errors | Print... | Jump To: 01. Project IdentificationStarDev/ResourceAdministration/Project/ProjectEditor?Project=com... 1 #12;Edit: Study - APP- Save | Exit | Hide/Show Errors | Print... | Jump To: 02. Study

  20. Using Bayesian Networks in an Industrial Setting: Making Printing Systems Adaptive

    E-Print Network [OSTI]

    Lucas, Peter

    . For example, in printing systems such characteristics include power di- vision and consumption, the speed of printing, and the quality of the print product. Such trade-offs heavily depend on the system's envi products or low throughput of paper. The problem of adaptability concerns taking actions based on available

  1. Tracking @stemxcomet: Teaching Programming to Blind Students via 3D Printing, Crisis Management, and Twitter

    E-Print Network [OSTI]

    Kane, Shaun K.

    r Tracking @stemxcomet: Teaching Programming to Blind Students via 3D Printing, Crisis Management such as 3D printing offer an opportunity for students to write programs that produce tactile objects and suggests future directions for integrating data analysis and 3D printing into programming instruction

  2. Bridging the Gap: Automated Steady Scaffoldings for 3D Printing Jrmie Dumas

    E-Print Network [OSTI]

    Lévy, Bruno

    Bridging the Gap: Automated Steady Scaffoldings for 3D Printing Jérémie Dumas Université de Figure 1: The upper leg of the Poppy robot (www.poppy-project.org) cannot be 3D printed on low cost FDM usage. Abstract Fused Filament Fabrication (FFF) is the process of 3D printing ob- jects from melted

  3. Manipulating complex network structures in virtual reality and 3D printing of the results

    E-Print Network [OSTI]

    Verschure, Paul

    Manipulating complex network structures in virtual reality and 3D printing of the results Alberto the results at any time for direct 3D printing. 1. INTRODUCTION Although its first appearance on the market can be tracked up to three decades ago, stereolithography (also known as 3D printing) has become

  4. Custom 3D-Printed Rollers for Frieze Pattern Cookies Robert Hanson

    E-Print Network [OSTI]

    Custom 3D-Printed Rollers for Frieze Pattern Cookies Robert Hanson Towson University, Emeritus a method for converting images of repeating patterns, e.g., Roman friezes or Escher tessellations, into 3D-printed the world of mathematics and the art of cooking. Fractal cookies based on stretching and folding [1] and 3D-printed

  5. Effect of viscoelasticity on liquid transfer during gravure printing Ashwin K. Sankaran, Jonathan P. Rothstein

    E-Print Network [OSTI]

    Rothstein, Jonathan

    the many existing web coating and printing techniques for large-scale fabrication such as slit, roll, dip]. The primary advantage of roll-to-roll processing that is large areas of coated/printed films can be processed March 2012 Keywords: Viscoelasticity Gravure printing Pickout process Extensional rheology Coating a b

  6. MAE SEMINAR Recent advances in Additive Manufacturing/3D Printing Technologies, Material Science and

    E-Print Network [OSTI]

    Mease, Kenneth D.

    MAE SEMINAR Recent advances in Additive Manufacturing/3D Printing Technologies, Material Science Samueli School of Engineering University of California Irvine 3D printing or Additive Manufacturing in different shapes. 3D printing is also considered distinct from traditional machining techniques, which

  7. Customization and 3D Printing: A Challenging Playground for Software Product Lines

    E-Print Network [OSTI]

    Boyer, Edmond

    Customization and 3D Printing: A Challenging Playground for Software Product Lines Mathieu Acher firstname.lastname@irisa.fr ABSTRACT 3D printing is gaining more and more momentum to build customized. We provide hints that SPL-alike techniques are practically used in 3D printing and thus relevant

  8. Cost-effective Printing of 3D Objects with Skin-Frame Structures Weiming Wang,

    E-Print Network [OSTI]

    Deng, Jiansong

    ; Keywords: 3D printing, fabrication, frame structure, sparsity op- timization Corresponding author: yangzw@ustc.edu.cn (Zhouwang Yang) 1 Introduction Additive manufacturing (3D printing) enables fabrication of physi- cal techniques of 3D printing has received considerable attention for assisting users to generate desired

  9. Graphene Transistors Fabricated via Transfer-Printing In Device Active-Areas

    E-Print Network [OSTI]

    Graphene Transistors Fabricated via Transfer-Printing In Device Active-Areas on Large Wafer Xiaogan graphene islands from a graphite and then uses transfer printing to place the islands from the stamp from the printed graphene. The transistors show a hole and electron mobility of 3735 and 795 cm2/V

  10. Improved E-jet Printing Provides Higher Resolution And More Versatility

    E-Print Network [OSTI]

    Rogers, John A.

    Improved E-jet Printing Provides Higher Resolution And More Versatility Science Daily have established new benchmarks for precision control and resolution in jet-printing processes. "We have invented methods for an electrohydrodynamic jet (e-jet) printing process that can produce patterns

  11. Organized Workers and the Making of Los Angeles, 1890-1915

    E-Print Network [OSTI]

    Stansbury, Jeffrey D

    2008-01-01

    and Mining With Supplement for California, Wash- ington, DC: U.S. Government Printing Office,Mining With Supplement for California, Washington, D.C. : Government Printing Office,

  12. Optical systems fabricated by printing-based assembly

    DOE Patents [OSTI]

    Rogers, John (Champaign, IL); Nuzzo, Ralph (Champaign, IL); Meitl, Matthew (Durham, NC); Menard, Etienne (Durham, NC); Baca, Alfred J. (Urbana, IL); Motala, Michael (Champaign, IL); Ahn, Jong-Hyun (Suwon, KR); Park, Sang-II (Savoy, IL); Yu; Chang-Jae (Urbana, IL); Ko, Heung-Cho (Gwangju, KR); Stoykovich; Mark (Dover, NH); Yoon, Jongseung (Urbana, IL)

    2011-07-05

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  13. Optical systems fabricated by printing-based assembly

    SciTech Connect (OSTI)

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred J; Motala, Michael; Ahn, Jong-Hyun; Park, Sang-Il; Yu, Chang-Jae; Ko, Heung Cho; Stoykovich, Mark; Yoon, Jongseung

    2014-05-13

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  14. Sculplexity: Sculptures of Complexity using 3D printing

    E-Print Network [OSTI]

    Reiss, D S; Evans, T S

    2014-01-01

    We show how to convert models of complex systems such as 2D cellular automata into a 3D printed object. Our method takes into account the limitations inherent to 3D printing processes and materials. Our approach automates the greater part of this task, bypassing the use of CAD software and the need for manual design. As a proof of concept, a physical object representing a modified forest fire model was successfully printed. Automated conversion methods similar to the ones developed here can be used to create objects for research, for demonstration and teaching, for outreach, or simply for aesthetic pleasure. As our outputs can be touched, they may be particularly useful for those with visual disabilities.

  15. Toward integrated PV panels and power electronics using printing technologies

    SciTech Connect (OSTI)

    Ababei, Cristinel; Yuvarajan, Subbaraya; Schulz, Douglas L.

    2010-07-15

    In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

  16. For additional information, please e-mail ctsc_noveltech@med.cornell.edu REQUEST FOR CTSC 3D PRINTING APPLICATIONS

    E-Print Network [OSTI]

    Chen, Tsuhan

    for commercialization 3D Printing Novel Technology Award $10,000 (direct costs) with use of the New CTSC 3D Printing with 3D printing technology in order to rapidly develop novel biomedical products with application) and importance of funding to feasibility of the project Research Plan (use of the CTSC 3D Printing Core Facility

  17. Dynamic magnetization states of a spin valve in the presence of dc and ac currents: Synchronization, modification, and chaos

    E-Print Network [OSTI]

    Li, Charles

    Dynamic magnetization states of a spin valve in the presence of dc and ac currents: Synchronization and numerical calculations of dynamic magnetization states of a spin valve in the presence of dc and ac currents are expected to appear. In this paper, we consider a simple spin valve as a model system to study the problem

  18. Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources. In the current power

    E-Print Network [OSTI]

    Tolbert, Leon M.

    Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources in pollution [1]. The most well-known green technologies include photovoltaics and wind turbines. Although fuel, fuel cells and photovoltaics, produce direct current (DC). Currently, power system infrastructures

  19. Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004. OAK RIDGE NATIONAL LABORATORY

    E-Print Network [OSTI]

    Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 27-29, 2004. OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY American Superconductor Corporation U. Schoop, M. W&D support #12;Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 27-29, 2004

  20. Optimal Demand Response in DC Distribution Networks Hamed Mohsenian-Rad, Member, IEEE and Ali Davoudi, Member, IEEE

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    Optimal Demand Response in DC Distribution Networks Hamed Mohsenian-Rad, Member, IEEE and Ali first present an optimization-based foundation for demand response in DC distribution networks. Then, we devise a pricing mechanism to enforce optimal demand response in a distributed fashion. Simulation

  1. Jaworski Liquid metal PSI science and component development FESAC Meeting, Washington DC July 8-10, 2014

    E-Print Network [OSTI]

    Jaworski ­ Liquid metal PSI science and component development ­ FESAC Meeting, Washington DC ­ July 8-10, 2014 Liquid metal plasma-material interaction science and component development MA Jaworski on behalf of the Liquid Metal Plasma-Facing Component working group FESAC Meeting, Washington DC ­ July 8

  2. DC WRRC Report No. 127 GROUND WATER RESOURCE ASSESSMENT STUDY FOR

    E-Print Network [OSTI]

    District of Columbia, University of the

    project: James Collier - DCRA Water Resources Management Division Mohsin Siddique - DCRA Water Quality DRILLING AND FIELD OPERATIONS REPORT FOR THE GROUP B WELLS D.C. WATER RESOURCES RESEARCH CENTER University: Well Drilling and Field Operations Report - Group B Wells DATE: July 1993 AUTHOR(S): Jutta Schneider

  3. Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted Resonator

    E-Print Network [OSTI]

    York, Robert A.

    Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted.3 0/0. Index Terms - Acoustic resonators, bulk acoustic wave devices, delay filters, ferroelectric,4] that can be exploited to realize voltage-switchable bulk-acoustic wave (BAW) devices for RF applications [5

  4. dc electric field tunable bulk acoustic wave solidly mounted resonator using SrTiO3

    E-Print Network [OSTI]

    York, Robert A.

    dc electric field tunable bulk acoustic wave solidly mounted resonator using SrTiO3 G. N. SaddikTiO3 solidly mounted bulk acoustic wave resonator has been designed, fabricated, and tested of Physics. DOI: 10.1063/1.2759464 Thin film bulk acoustic wave resonators FBARs have been in use by research

  5. SEC Training -Risk Management Washington, D.C., February 27, 2006

    E-Print Network [OSTI]

    Frey, Robert J.

    SEC Training - Risk Management Washington, D.C., February 27, 2006 Robert J. Frey, Ph.D. Director Managers, pp. IV-3 to IV-9 · Market Risk · Liquidity Risk · Credit Risk · Leverage Risk · Operational Risk · Valuation Risk 10 #12;Monitoring Risk Source: MFA's 2005 Sound Practices for Hedge Fund Managers, pp. AI-1

  6. DC 20 a,f,g AXISYMMETRIC INSTABILITY IN A NONCIRCDLAR TOKAMAK

    E-Print Network [OSTI]

    Sprott, Julien Clinton

    DC 20 a,f,g AXISYMMETRIC INSTABILITY IN A NONCIRCDLAR TOKAMAK: EXPERIMENT AND THEORY BY B, a tokamak with a four-null poloidal divertor. Experi mental results are clo sely compared with stability indicates #12;AXISYMMETRIC INSTABILITY IN A NONCIRCULAR TOKAMAK: EXPERIMENT AND THEORY by B. Lipschultz

  7. Design and Verification of Smart and Scalable DC Microgrids for Emerging Regions

    E-Print Network [OSTI]

    Sanders, Seth

    in grid power: A droop voltage power-sharing scheme is implemented, wherein the microgrid voltage droops transmission and distributed storage. Since the PMUs will be able to communicate digitally to the power stationDesign and Verification of Smart and Scalable DC Microgrids for Emerging Regions P. Achintya

  8. February 2012 Did you know that the Navy Memorial in Washington D.C. is

    E-Print Network [OSTI]

    February 2012 004/12 Did you know that the Navy Memorial in Washington D.C. is is honoring all://navymemorial.org/yotc/Home/tabid/224/Default.aspx Challenge to all: in the Navy Log. This is your free opportunity to be entered and activities occurring across our Navy to support YOTC through this Facebook page: http

  9. November 2002 15th TOFE, Washington, D.C. 1 Thermal Behavior and Operating

    E-Print Network [OSTI]

    Raffray, A. René

    - Enthalpy transfer - Condensation (latent heat transfer) in the case of gas with boiling point and melting of condensation. - Latent heats have only a small effect on the overall energy transfer which is governed, Washington, D.C. 7 Radiation Heat Transfer from Chamber Wall · Simple estimate given by: Where: Tw

  10. IEEE Photovoltaic Specialists Conference Washington, D.C., May 13-17, 1996

    E-Print Network [OSTI]

    Perez, Richard R.

    IEEE Photovoltaic Specialists Conference Washington, D.C., May 13-17, 1996 NICHE MARKETS FOR GRID-CONNECTED PHOTOVOLTAICS Howard Wenger Pacific Energy Group Walnut Creek, CA, USA Christy Herig & Roger Taylor National- Sited Photovoltaics (CSPV) in the United States. 1 The intent is to demonstrate markets that are cost

  11. IMPLEMENTATION OF A DC BUMP AT THE STORAGE RING INJECTION STRAIGHT SECTION

    SciTech Connect (OSTI)

    Wang, G.M.; Shaftan, T.; Kramer, S.K.; Fliller, R.; Guo, W.; Heese, R.; Yu, L.H.; Parker, B.; Willeke, F.J.

    2011-03-28

    The NSLS II beam injection works with a DC septum, a pulsed septum and four fast kicker magnets. The kicker power supplies each produce a two revolution period pulsed field, 5.2 {micro}s half sine waveform, using {approx}5kA drive voltage. The corresponding close orbit bump amplitude is {approx}15mm. It is desired that the bump is transparent to the users for top-off injection. However, high voltage and short pulse power supplies have challenges to maintain pulse-to-pulse stability and magnet-to-magnet reproducibility. To minimize these issues, we propose implementing a DC local bump on top of the fast bump to reduce the fast kicker strength by a factor of 2/3. This bump uses two storage ring corrector magnets plus one additional magnet at the septum to create a local bump. Additionally, these magnets could provide a DC bump to simulate the septum position effects on the store beam lifetime. This paper presents the detail design of this DC injection bump and related beam dynamics.

  12. Diagnostics of ballistic electrons in a dc/rf hybrid capacitively coupled discharge

    E-Print Network [OSTI]

    Economou, Demetre J.

    Diagnostics of ballistic electrons in a dc/rf hybrid capacitively coupled discharge Lin Xu,1,a Lee the substrate electrode or the semiconduc- tor wafer. Watanabe et al.7 superimposed a high energy electron beam. Economou,2,c and Vincent M. Donnelly2,d 1 Tokyo Electron America, Austin, Texas 78741, USA 2 Department

  13. The ecological causes of evolution Andrew D.C. MacColl

    E-Print Network [OSTI]

    Obbard, Darren

    The ecological causes of evolution Andrew D.C. MacColl School of Biology, University of Nottingham, but it is not the cause of evolution. The cause of natural selection and, therefore, of adaptive evolution, is any of species and their response to environmental change. What causes natural selection? When one contemplates

  14. 1. PMU Based RAS for a Hybrid AC/DC System 1.1. Project Team

    E-Print Network [OSTI]

    Li, Husheng

    1. PMU Based RAS for a Hybrid AC/DC System 1.1. Project Team Primary Thrust: Modeling Secondary to be detected more quickly allowing less severe action. This effort focuses on PMU driven response-based RAS from PMU units. The project goals break down into three efforts: · Investigating the possibility

  15. Living downtown in Washington, D.C. : defining residential community in the city center

    E-Print Network [OSTI]

    Allen, Robin P. (Robin Porter)

    1995-01-01

    In Washington D.C., as in many other American cities, a significant section of the downtown is distinguished by boarded-up buildings and vacant lots. In spite of traces of a city plan that could organize and accommodate a ...

  16. Chapter 6.7 Edwards Auto 306 DC and RF Sputter Coater

    E-Print Network [OSTI]

    Healy, Kevin Edward

    mechanical pump is installed for rough pumping and one turbo pump for fine pumping. A crystal monitor on it to assure good seal of the chamber. 4.2 Control Panel: Allows you to vent and pump the chamber. 4.3 DC power over 30 years of your career. 5.4 Wear light blue vacuum gloves when you handle components

  17. CTMCONTROL: Addressing the MC/DC Objective for Safety-Critical Automotive Software

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , testing, MC/DC, ISO 26262, AUTOSAR. 1 INTRODUCTION ISO 26262 [1] is one of the main points of reference-critical software. AUTOSAR, since release 4.0 in 2011 [2], refers to the demands of ISO 26262 for safety A (most critical) software for airborne systems before they can receive an official approval/certification

  18. DC Discharge Studies Using PIC-MCC: Unmagnetized Glow Discharge Theory Jeff Hammel & John Verboncoeur

    E-Print Network [OSTI]

    Wurtele, Jonathan

    DC Discharge Studies Using PIC-MCC: Unmagnetized Glow Discharge Theory Jeff Hammel & John Wiley and Sons, Inc., New York, 1994. · Leonard B. Loeb. Fundamental Processes of Electrical Discharge. Verboncoeur, A. B. Langdon, and N. T. Gladd. An object-oriented electromagnetic pic code. Computer Physics

  19. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-07-12

    To clarify and modify policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), facility contractor employees located in the Washington, D.C., area. Cancels DOE N 350.5. Certified 12-28-06. Canceled by DOE O 350.2A.

  20. Bi-directional Current-fed Medium Frequency Transformer Isolated AC-DC Converter 

    E-Print Network [OSTI]

    Essakiappan, Somasundaram

    2011-08-08

    demand for power converters with bi-directional capabilities. The objective of this thesis is to develop a high power quality, bi-directional AC-DC power converter that is a solution to the aforementioned problems. This thesis studies an existing topology...

  1. New World Monkeys Alfred L Rosenberger, Smithsonian Institution, Washington DC, USA

    E-Print Network [OSTI]

    Rosenberger, Alfred H.

    New World Monkeys Alfred L Rosenberger, Smithsonian Institution, Washington DC, USA Walter Carl Hartwig,Touro University College of Osteopathic Medicine, Vallejo, California, USA New World monkeys are the living (nonhuman) primates of South and Central America. Introduction New World monkeys are distributed

  2. New Global Alliance Formed to Undercut Illegal WASHINGTON, DC, May 26, 2010 (ENS) -To reduce trade

    E-Print Network [OSTI]

    New Global Alliance Formed to Undercut Illegal Logging WASHINGTON, DC, May 26, 2010 (ENS with a stake in promoting legal forest product supply chains. The Forest Legality Alliance aims to achieve products and increasing the capacity of suppliers to deliver legal wood and paper. "The Alliance seeks

  3. Joint two-dimensional DC resistivity and seismic travel time inversion with cross-gradients constraints

    E-Print Network [OSTI]

    Meju, Max

    Joint two-dimensional DC resistivity and seismic travel time inversion with cross to evaluate the structural features common to both methods. The cross-gradients function is incorporated method. The resultant iterative two-dimensional (2-D) joint inversion scheme is successfully applied

  4. Operation of the DC current transformer intensity monitors at FNAL during run II

    SciTech Connect (OSTI)

    Crisp, J.; Fellenz, B.; Heikkinen, D.; Ibrahim, M.A.; Meyer, T.; Vogel, G.; /Fermilab

    2012-01-01

    Circulating beam intensity measurements at FNAL are provided by five DC current transformers (DCCT), one per machine. With the exception of the DCCT in the Recycler, all DCCT systems were designed and built at FNAL. This paper presents an overview of both DCCT systems, including the sensor, the electronics, and the front-end instrumentation software, as well as their performance during Run II.

  5. Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith Sigurd Skogestad Introduction Research in fuel cells receives currently a lot of interest. Fuel cells can be used, in different. However, the dynamics of fuel cells has received comparatively less attention. Control of fuel cells

  6. Navier-Stokes on Black Hole Horizons and DC Thermoelectric Conductivity

    E-Print Network [OSTI]

    Aristomenis Donos; Jerome P. Gauntlett

    2015-11-12

    Within the context of the AdS/CFT correspondence we show that the DC thermoelectric conductivity can be obtained by solving the linearised, time-independent and forced Navier-Stokes equations on the black hole horizon for an incompressible and charged fluid.

  7. Navier-Stokes on Black Hole Horizons and DC Thermoelectric Conductivity

    E-Print Network [OSTI]

    Donos, Aristomenis

    2015-01-01

    We consider a general class of black hole solutions of Einstein-Maxwell theory which are holographically dual to CFTs with spatially dependent sources. We show that an averaged DC thermoelectric conductivity matrix can be obtained by solving the forced, linearised, time-independent Navier-Stokes equations on the black hole horizon for an incompressible and charged fluid.

  8. Selective evaporation of focusing fluid in two-fluid hydrodynamic print head.

    SciTech Connect (OSTI)

    Keicher, David M.; Cook, Adam W.

    2014-09-01

    The work performed in this project has demonstrated the feasibility to use hydrodynamic focusing of two fluid steams to create a novel micro printing technology for electronics and other high performance applications. Initial efforts focused solely on selective evaporation of the sheath fluid from print stream provided insight in developing a unique print head geometry allowing excess sheath fluid to be separated from the print flow stream for recycling/reuse. Fluid flow models suggest that more than 81 percent of the sheath fluid can be removed without affecting the print stream. Further development and optimization is required to demonstrate this capability in operation. Print results using two-fluid hydrodynamic focusing yielded a 30 micrometers wide by 0.5 micrometers tall line that suggests that the cross-section of the printed feature from the print head was approximately 2 micrometers in diameter. Printing results also demonstrated that complete removal of the sheath fluid is not necessary for all material systems. The two-fluid printing technology could enable printing of insulated conductors and clad optical interconnects. Further development of this concept should be pursued.

  9. Liquid Phase 3D Printing for Quickly Manufacturing Metal Objects with Low Melting Point Alloy Ink

    E-Print Network [OSTI]

    Wang, Lei

    2014-01-01

    Conventional 3D printings are generally time-consuming and printable metal inks are rather limited. From an alternative way, we proposed a liquid phase 3D printing for quickly making metal objects. Through introducing metal alloys whose melting point is slightly above room temperature as printing inks, several representative structures spanning from one, two and three dimension to more complex patterns were demonstrated to be quickly fabricated. Compared with the air cooling in a conventional 3D printing, the liquid-phase-manufacturing offers a much higher cooling rate and thus significantly improves the speed in fabricating metal objects. This unique strategy also efficiently prevents the liquid metal inks from air oxidation which is hard to avoid otherwise in an ordinary 3D printing. Several key physical factors (like properties of the cooling fluid, injection speed and needle diameter, types and properties of the printing ink, etc.) were disclosed which would evidently affect the printing quality. In addit...

  10. Scanning and Printing Persons in 3D Jurgen Sturm1

    E-Print Network [OSTI]

    Lunds Universitet

    miniatures of persons using a Kinect sensor and a 3D color printer. To achieve this, we acquire color- through in rapid prototyping in recent years. Modern 3D printers are able to print colored 3D models at resolutions comparable to 2D paper printers. On the one hand, the creation of a detailed, printable 3D model

  11. Printed by Jouve, 75001 PARIS (FR) Europisches Patentamt

    E-Print Network [OSTI]

    Wu, Bin

    Printed by Jouve, 75001 PARIS (FR) Europäisches Patentamt European Patent Office Office européen des brevets (19) EP1713168A2 #12;#12; (11) EP 1 713 168 A2 (12) EUROPEAN PATENT APPLICATION (43, (David) W. Toronto Ontario Canada M5T 1G8 (CA) · Liu, Congwei Toronto Ontario Canada M5T 1ZA (CA) · Wu

  12. NJIT Library Organizational Chart Printed: 5/11/2010

    E-Print Network [OSTI]

    Bieber, Michael

    Velez, Lucy Digital Projects Librarian Library Assistant I Library Assistant I Administrative AssistantNJIT Library Organizational Chart Printed: 5/11/2010 Revised 5/11/10 Mettle, Doreen Gervits, Maya Director of Circulation & Interlibrary Loan Director of the Architecture Library Director of Reference

  13. Click here to print Marathon robot: 'Ranger' sets a world

    E-Print Network [OSTI]

    Ruina, Andy L.

    . Professor Ruina said: 'Our challenge is to lower the energy use while still maintaining balance, 'TheClick here to print Marathon robot: 'Ranger' sets a world record by walking 40.5 miles non a new world record after their robot walked 40.5 miles on a single battery charge without stopping

  14. Monolithically integrated Helmholtz coils by 3-dimensional printing

    SciTech Connect (OSTI)

    Li, Longguang [Department of Electrical Engineering, University of Michigan–Shanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Abedini-Nassab, Roozbeh; Yellen, Benjamin B., E-mail: yellen@duke.edu [Department of Electrical Engineering, University of Michigan–Shanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Department of Mechanical Engineering and Materials Science, Duke University, P.O. Box 90300, Hudson Hall, Durham, North Carolina 27708 (United States)

    2014-06-23

    3D printing technology is of great interest for the monolithic fabrication of integrated systems; however, it is a challenge to introduce metallic components into 3D printed molds to enable broader device functionality. Here, we develop a technique for constructing a multi-axial Helmholtz coil by injecting a eutectic liquid metal Gallium Indium alloy (EGaIn) into helically shaped orthogonal cavities constructed in a 3D printed block. The tri-axial solenoids each carry up to 3.6?A of electrical current and produce magnetic field up to 70?G. Within the central section of the coil, the field variation is less than 1% and is in agreement with theory. The flow rates and critical pressures required to fill the 3D cavities with liquid metal also agree with theoretical predictions and provide scaling trends for filling the 3D printed parts. These monolithically integrated solenoids may find future applications in electronic cell culture platforms, atomic traps, and miniaturized chemical analysis systems based on nuclear magnetic resonance.

  15. Electrical Contacts to Molecular Layers by Nanotransfer Printing

    E-Print Network [OSTI]

    Rogers, John A.

    Electrical Contacts to Molecular Layers by Nanotransfer Printing Yueh-Lin Loo, David V. Lang, John of electrical contact. Results show that the nTP method produces superior devices in which the electrical for making electrical contacts in molecular electronics. Organic molecules whose electronic properties can

  16. Type or print clearly:1 NAME:__Bill Burgos___________________________________________________________2

    E-Print Network [OSTI]

    Burgos, William

    1 Type or print clearly:1 NAME:__Bill Burgos-863-7304_____________6 E-MAIL :__wdb3@psu.edu_______________________________7 Type of presentation: Oral _X_ Poster ____8 of Engineering and Applied Sciences, Cambridge,22 ABSTRACT23 Coal mine drainage (CMD) is the single greatest

  17. Print Date: 3/26/2004 The Implementation Challenge

    E-Print Network [OSTI]

    Faloutsos, Christos

    by the developers and users of these new systems. Keywords: Marketing, Decision Support System, Retailing, Scanner historical information. The most prevalent type of information in retail markets is transaction dataPrint Date: 3/26/2004 The Implementation Challenge of Pricing Decision Support Systems for Retail

  18. contents | print | close www.glasgow.ac.uk

    E-Print Network [OSTI]

    Guo, Zaoyang

    1 contents | print | close www.glasgow.ac.uk Gilmorehill Campus Development Framework June 2014 : Topic 4 107 Approach to Historic Assets: Sub Topics 108 · A Campus-wide Conservation Strategy 108 · Introduction 134 · Relevant Consultation Themes : Topic 7 135 Uses & Adaptability : Sub Topics 136 · Energy

  19. contents | print | close www.glasgow.ac.uk

    E-Print Network [OSTI]

    Guo, Zaoyang

    1 contents | print | close www.glasgow.ac.uk Gilmorehill Campus Development Framework FINAL : Topic 4 107 Approach to Historic Assets: Sub Topics 108 · A Campus-wide Conservation Strategy 108 · Introduction 134 · Relevant Consultation Themes : Topic 7 135 Uses & Adaptability : Sub Topics 136 · Energy

  20. Printing a Car: A Team Effort in Innovation

    SciTech Connect (OSTI)

    Rogers, Jay; Love, Lonnie; Johnson, Mark; Ivester, Rob; Neff, Rick; Blue, Craig; ,

    2014-09-17

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. Strati materialized out of 15% carbon-reinforced ABS thermoplastic in a record 44 hours, under the very eyes of attendees at this year's International Manufacturing Technology Show (IMTS).

  1. Vacuum Compatibility of 3D-Printed Materials

    E-Print Network [OSTI]

    Povilus, A P; Vendeiro, Z; Baquero-Ruiz, M; Fajans, J

    2013-01-01

    The fabrication fidelity and vacuum properties are tested for currently available 3D-printed materials including polyamide, glass, acrylic, and sterling silver. The silver was the only material found to be suitable to ultrahigh vacuum environments due to outgassing and sublimation observed in other materials.

  2. 3D Printing Prof. Hank Dietz & Paul Eberhart

    E-Print Network [OSTI]

    Dietz, Henry G. "Hank"

    3D Printing Prof. Hank Dietz & Paul Eberhart September 28, 2013 University of Kentucky Electrical/Craft: paper moves in Y, knife in X EDM/Laser: X/Y bed, vaporizes material #12;Subtractive 3D CNC: Computer "The whole is greater than the sum of its parts." ­ Aristotle #12;Additive 3D Building Material

  3. Egyptian Journal of Natural History, 2009, Vol. Printed in Egypt.

    E-Print Network [OSTI]

    Nottingham, University of

    Egyptian Journal of Natural History, 2009, Vol. Printed in Egypt: Villa 9030, Hurghada, Red Sea District, Egypt 2- Permanent address: Tg. Mures, str. C. R. Vivu 11/D, ap continental part is presented. The status of the species in Egypt and the region is presented

  4. Hunter College Style Guide FOR WEB AND PRINT

    E-Print Network [OSTI]

    Qiu, Weigang

    or not to use periods in an organization's abbreviation, consult the organization's website or printed materials is not universally recognized, spell out the organization's name on first use, followed by the abbreviation in tables or charts where space is limited. Administrative and Academic Titles The titles Mr., Ms., Mrs

  5. Cure cycle evaluation for multilayer printed wiring boards

    SciTech Connect (OSTI)

    Lula, J.W.

    1980-06-01

    The cure cycle for multilayer printed wiring boards (PWBs) made from general-puspore, fire-retardant epoxy/glass (GF) material has been evaluated for the optimum delamination resistance at soldering temperatures. The results that, for the epoxy resin system used to manufacture multilayer PWBs at Bendix Kansas City, a wide range of cure cycle variations has a minimal effect on delamination resistance.

  6. Poster Printing Instructions As specified on our website,

    E-Print Network [OSTI]

    Karonis, Nicholas T.

    Services with your saved presentation on a flash drive. Thereafter, you and Media Services will discuss to print an accurate account of your work, this must be saved both as a PDF and JPEG file. How to save as a PDF: -Open document -Once the document has been saved as a PDF (not PPT), How to save as a JPEG

  7. Linkping University Post Print Vision-Based Unmanned Aerial Vehicle

    E-Print Network [OSTI]

    Doherty, Patrick

    Linköping University Post Print Vision-Based Unmanned Aerial Vehicle Navigation Using Geo. Original Publication: Gianpaolo Conte and Patrick Doherty, Vision-Based Unmanned Aerial Vehicle Navigation.1155/2009/387308 Research Article Vision-Based Unmanned Aerial Vehicle Navigation Using Geo-Referenced Information Gianpaolo

  8. Printing a Car: A Team Effort in Innovation

    ScienceCinema (OSTI)

    Rogers, Jay; Love, Lonnie; Johnson, Mark; Ivester, Rob; Neff, Rick; Blue, Craig;

    2014-11-24

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. Strati materialized out of 15% carbon-reinforced ABS thermoplastic in a record 44 hours, under the very eyes of attendees at this year's International Manufacturing Technology Show (IMTS).

  9. The GeorGe WashinGTon UniversiTy | WashinGTon DC The Elliott School's M.A. program in International Affairs

    E-Print Network [OSTI]

    Larsen, Mike

    The GeorGe WashinGTon UniversiTy | WashinGTon DC Overview The Elliott School's M.A. program affairs. Students can take advantage of numerous internship opportunities in the Washington, DC, area to pursue daytime internships in the Washington, DC, metropolitan area. Master of arts in international

  10. DRAFT of Klahr, D. (2012) Patterns, Rules, & Discoveries in Life and in Science. In Carver, S., & Shrager, J..(Eds.) The Journey From Child to Scientist: Integrating Cognitive Development and the Education Sciences. Washington DC: American Psychological A

    E-Print Network [OSTI]

    Klahr, David

    2012-01-01

    Development and the Education Sciences. Washington DC: American Psychological Association 2 ingenious and the Education Sciences. Washington DC: American Psychological Association 1 Patterns, Rules, & Discoveries

  11. Quantum Oscillator on $\\DC P^n$ in a constant magnetic field

    E-Print Network [OSTI]

    Stefano Bellucci; Armen Nersessian; Armen Yeranyan

    2004-06-22

    We construct the quantum oscillator interacting with a constant magnetic field on complex projective spaces $\\DC P^N$, as well as on their non-compact counterparts, i. e. the $N-$dimensional Lobachewski spaces ${\\cal L}_N$. We find the spectrum of this system and the complete basis of wavefunctions. Surprisingly, the inclusion of a magnetic field does not yield any qualitative change in the energy spectrum. For $N>1$ the magnetic field does not break the superintegrability of the system, whereas for N=1 it preserves the exact solvability of the system. We extend this results to the cones constructed over $\\DC P^N$ and ${\\cal L}_N$, and perform the (Kustaanheimo-Stiefel) transformation of these systems to the three-dimensional Coulomb-like systems.

  12. Demonstration of Cathode Emittance Dominated High Bunch Charge Beams in a DC gun-based Photoinjector

    E-Print Network [OSTI]

    Gulliford, Colwyn; Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

    2015-01-01

    We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (greater than or equal to 100 pC) beams produced in the DC gun-based Cornell Energy Recovery Linac Photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittance measured at 9-9.5 MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs (ERLs) and Free Electron Lasers (FELs).

  13. Metastability in a nano-bridge based hysteretic DC-SQUID embedded in superconducting microwave resonator

    E-Print Network [OSTI]

    Eran Segev; Oren Suchoi; Oleg Shtempluck; Fei Xue; Eyal Buks

    2010-07-29

    We study the metastable response of a highly hysteretic DC-SQUID made of a Niobium loop interrupted by two nano-bridges. We excite the SQUID with an alternating current and with direct magnetic flux, and find different stability zones forming diamond-like structures in the measured voltage across the SQUID. When such a SQUID is embedded in a transmission line resonator similar diamond structures are observed in the reflection pattern of the resonator. We have calculated the DC-SQUID stability diagram in the plane of the exciting control parameters, both analytically and numerically. In addition, we have obtained numerical simulations of the SQUID equations of motion, taking into account temperature variations and non-sinusoidal current-phase relation of the nano-bridges. Good agreement is found between experimental and theoretical results.

  14. Demonstration of cathode emittance dominated high bunch charge beams in a DC gun-based photoinjector

    SciTech Connect (OSTI)

    Gulliford, Colwyn Bartnik, Adam Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

    2015-03-02

    We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (?100 pC) beams produced in the DC gun-based Cornell energy recovery linac photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittances measured at 9–9.5?MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs and Free Electron Lasers.

  15. Effect of alkali addition on DC conductivity and thermal properties of vanadium-bismo-borate glasses

    SciTech Connect (OSTI)

    Khasa, S., E-mail: skhasa@rediff.com; Dahiya, M. S., E-mail: skhasa@rediff.com [Physics Department, Deenbandhu Chhotu Ram University of Science and Technology, Murthal-131039 (India); Agarwal, A. [Physics Department, Guru Jambheshwara University of Science and Technology, Hisar-125001 (India)

    2014-04-24

    The DC Conductivity and Differential Thermal Analysis of glasses with composition (30?x)Li{sub 2}O?xV{sub 2}O{sub 5}?20Bi{sub 2}O{sub 3}?50B{sub 2}O{sub 3}(x=15, 10, 5) has been carried out in order to study the effect of replacing the Transition Metal Oxide (TMO) with alkali oxide. A significant increase in the DC conductivity has been observed with increase in alkali content. Again the thermal measurements have shown the decrease in both glass transition temperature (T{sub g}) and crystallization temperature (T{sub x}). The Glass Stability (GS) and Glass Forming Ability (GFA) have also been calculated and these also were found to decrease with increase in alkali oxide content at the cost of TMO.

  16. Time series analysis of ionization waves in dc neon glow discharge

    SciTech Connect (OSTI)

    Hassouba, M. A.; Al-Naggar, H. I.; Al-Naggar, N. M.; Wilke, C. [Department of Physics, Faculty of Science, Benha University (Egypt); Institute of Physics, E. M. A. University, Domstrasse 10a, 17489 Greifswald (Germany)

    2006-07-15

    The dynamics of dc neon glow discharge is examined by calculating a Lyapunov exponent spectrum (LES) and correlation dimension (D{sub corr}) from experimental time series. The embedding theory is used to reconstruct an attractor with the delay coordinate method. The analysis refers to periodic, chaotic, and quasi-periodic attractors. The results obtained are confirmed by a comparison with other methods of time series analysis such as the Fourier power spectrum and autocorrelation function. The main object of the present work is the positive column of a dc neon glow discharge. The positive column is an excellent model for the study of a non-linearity plasma system because it is nonisothermal plasma far from equilibrium.

  17. Ions in solution: Density corrected density functional theory (DC-DFT)

    SciTech Connect (OSTI)

    Kim, Min-Cheol; Sim, Eunji; Burke, Kieron

    2014-05-14

    Standard density functional approximations often give questionable results for odd-electron radical complexes, with the error typically attributed to self-interaction. In density corrected density functional theory (DC-DFT), certain classes of density functional theory calculations are significantly improved by using densities more accurate than the self-consistent densities. We discuss how to identify such cases, and how DC-DFT applies more generally. To illustrate, we calculate potential energy surfaces of HO·Cl{sup ?} and HO·H{sub 2}O complexes using various common approximate functionals, with and without this density correction. Commonly used approximations yield wrongly shaped surfaces and/or incorrect minima when calculated self consistently, while yielding almost identical shapes and minima when density corrected. This improvement is retained even in the presence of implicit solvent.

  18. Method of measuring the dc electric field and other tokamak parameters

    DOE Patents [OSTI]

    Fisch, Nathaniel J. (Princeton, NJ); Kirtz, Arnold H. (Princeton Junction, NJ)

    1992-01-01

    A method including externally imposing an impulsive momentum-space flux to perturb hot tokamak electrons thereby producing a transient synchrotron radiation signal, in frequency-time space, and the inference, using very fast algorithms, of plasma parameters including the effective ion charge state Z.sub.eff, the direction of the magnetic field, and the position and width in velocity space of the impulsive momentum-space flux, and, in particular, the dc toroidal electric field.

  19. Design, Packaging, and Architectural Policy Co-optimization for DC Power Integrity in 3D DRAM

    E-Print Network [OSTI]

    Lim, Sung Kyu

    -domain CAD/architectural platform that addresses DC power noise issues in 3D DRAM targeting stacked DDR3) Interposer Figure 1: Default configurations of four 3D DRAM designs. (a) on-chip stacked DDR3, (b) off-chip stacked DDR3, (c) Wide I/O, and (d) HMC. are used in a stacked DDR3 design [2] to reduce power noise. Sub

  20. Analogue Hawking Radiation in a dc-SQUID Array Transmission Line

    E-Print Network [OSTI]

    P. D. Nation; M. P. Blencowe; A. J. Rimberg; E. Buks

    2009-08-01

    We propose the use of a superconducting waveguide formed from an array of dc-SQUID's for investigating analogue Hawking radiation. Biasing the array with a space-time varying flux modifies the propagation velocity of the waveguide, leading to an effective metric with an horizon. Being a fundamentally quantum mechanical device, this setup allows for investigations of quantum effects such as back-reaction and analogue space-time fluctuations on the Hawking process.