National Library of Energy BETA

Sample records for db decibels dba

  1. Vision Industries dba Vision Motor Corp | Open Energy Information

    Open Energy Info (EERE)

    Industries dba Vision Motor Corp Jump to: navigation, search Name: Vision Industries (dba Vision Motor Corp) Place: Santa Monica, California Zip: 90405 Product: Santa Monica-based...

  2. Ultra Soy of America DBA USA Biofuels | Open Energy Information

    Open Energy Info (EERE)

    Ultra Soy of America DBA USA Biofuels Jump to: navigation, search Name: Ultra Soy of America (DBA USA Biofuels) Place: Fort Wayne, Indiana Zip: 46898 Sector: Biofuels Product: An...

  3. Chapeau Inc dba BluePoint Energy Inc | Open Energy Information

    Open Energy Info (EERE)

    Zip: 89706 Product: Chapeau Inc. develops, assembles, and sells packaged Combined Heat and Power generation systems. References: Chapeau Inc (dba BluePoint Energy Inc)1...

  4. A COMPREHENSIVE SPECTROSCOPIC ANALYSIS OF DB WHITE DWARFS

    SciTech Connect (OSTI)

    Bergeron, P.; Wesemael, F.; Dufour, Pierre; Beauchamp, A.; Hunter, C.; Gianninas, A.; Limoges, M.-M.; Dufour, Patrick; Fontaine, G. [Departement de Physique, Universite de Montreal, C.P. 6128, Succ. Centre-Ville, Montreal, QC H3C 3J7 (Canada); Saffer, Rex A. [Strayer University, 234 Mall Boulevard, Suite G-50, King of Prussia, PA 19406 (United States); Ruiz, M. T. [Departamento de Astronomia, Universidad de Chile, Casilla 36-D, Santiago (Chile); Liebert, James, E-mail: bergeron@astro.umontreal.ca, E-mail: wesemael@astro.umontreal.ca, E-mail: gianninas@astro.umontreal.ca, E-mail: limoges@astro.umontreal.ca, E-mail: dufourpa@astro.umontreal.ca, E-mail: fontaine@astro.umontreal.ca, E-mail: alain.beauchamp@fti-ibis.com, E-mail: chris.hunter@yale.edu, E-mail: rex.saffer@strayer.edu, E-mail: mtruiz@das.uchile.cl [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States)

    2011-08-10

    We present a detailed analysis of 108 helium-line (DB) white dwarfs based on model atmosphere fits to high signal-to-noise optical spectroscopy. We derive a mean mass of 0.67 M{sub sun} for our sample, with a dispersion of only 0.09 M{sub sun}. White dwarfs also showing hydrogen lines, the DBA stars, comprise 44% of our sample, and their mass distribution appears similar to that of DB stars. As in our previous investigation, we find no evidence for the existence of low-mass (M < 0.5 M{sub sun}) DB white dwarfs. We derive a luminosity function based on a subset of DB white dwarfs identified in the Palomar-Green Survey. We show that 20% of all white dwarfs in the temperature range of interest are DB stars, although the fraction drops to half this value above T{sub eff} {approx} 20,000 K. We also show that the persistence of DB stars with no hydrogen features at low temperatures is difficult to reconcile with a scenario involving accretion from the interstellar medium, often invoked to account for the observed hydrogen abundances in DBA stars. We present evidence for the existence of two different evolutionary channels that produce DB white dwarfs: the standard model where DA stars are transformed into DB stars through the convective dilution of a thin hydrogen layer and a second channel where DB stars retain a helium atmosphere throughout their evolution. We finally demonstrate that the instability strip of pulsating V777 Her white dwarfs contains no non-variables, if the hydrogen content of these stars is properly accounted for.

  5. Low-Cost Direct Bonded Aluminum (DBA) Substrates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon pm036_lin_2012_o.pdf More Documents & Publications ORNL: Low-Cost Direct Bonded Aluminum (DBA) Substrates (Agreement ID:23278) Low-Cost Direct Bonded Aluminum (DBA) Substrates Vehicle Technologies Office: 2012 Propulsion Materials R&D Annual Progress Report

  6. Low-Cost Direct Bonded Aluminum (DBA) Substrates | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon pm036_lin_2011_p.pdf More Documents & Publications ORNL: Low-Cost Direct Bonded Aluminum (DBA) Substrates (Agreement ID:23278) Low-Cost Direct Bonded Aluminum (DBA) Substrates Environmental Effects on Power Electronic Devices

  7. SEMI-ANNUAL REPORT FOR LNG DEVELOPMENT COMPANY, LLC (d/b/a OREGON LNG -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NFTA*) FE DKT. NO. 12-77-LNG - COND ORDER 3465 | Department of Energy REPORT FOR LNG DEVELOPMENT COMPANY, LLC (d/b/a OREGON LNG - NFTA*) FE DKT. NO. 12-77-LNG - COND ORDER 3465 SEMI-ANNUAL REPORT FOR LNG DEVELOPMENT COMPANY, LLC (d/b/a OREGON LNG - NFTA*) FE DKT. NO. 12-77-LNG - COND ORDER 3465 No Reports Received More Documents & Publications SEMI-ANNUAL REPORTS FOR TEXAS LNG - TEXAS LNG - FTA - FE DKT. NO. 13-160-LNG - 3443 SEMI-ANNUAL REPORTS FOR WALLER LNG SERVICES, LLC D/B/A WALLER

  8. SEMI-ANNUAL REPORTS FOR WALLER LNG SERVICES, LLC D/B/A WALLER POINT LNG -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FE DKT. NO. 12-152-LNG - ORDER 3211 | Department of Energy WALLER LNG SERVICES, LLC D/B/A WALLER POINT LNG - FE DKT. NO. 12-152-LNG - ORDER 3211 SEMI-ANNUAL REPORTS FOR WALLER LNG SERVICES, LLC D/B/A WALLER POINT LNG - FE DKT. NO. 12-152-LNG - ORDER 3211 PDF icon April 2014 PDF icon October 2013 PDF icon April 2013 More Documents & Publications SEMI-ANNUAL REPORTS FOR TEXAS LNG - TEXAS LNG - FTA - FE DKT. NO. 13-160-LNG - 3443 SEMI-ANNUAL REPORT FOR LNG DEVELOPMENT COMPANY, LLC (d/b/a

  9. SEMI-ANNUAL REPORTS FOR LNG DEVELOPMENT COMPANY, LLC (D/B/A Oregon LNG) -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FE DKT. NO. 12-48-LNG - ORDER 3100 | Department of Energy LNG DEVELOPMENT COMPANY, LLC (D/B/A Oregon LNG) - FE DKT. NO. 12-48-LNG - ORDER 3100 SEMI-ANNUAL REPORTS FOR LNG DEVELOPMENT COMPANY, LLC (D/B/A Oregon LNG) - FE DKT. NO. 12-48-LNG - ORDER 3100 PDF icon April 2013 More Documents & Publications ORDER NO. 3465: LNG DEVELOPMENT COMPANY, LLC Pangea LNG (North America) Holdings, LLC - 14-002-CIC (FE Dkt. No. 12-184-LNG New Company Name: NextDecade Partnerss, LLC) SEMI-ANNUAL REPORT -

  10. SciDB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    03 15 at 12.06.05 AM Bird's Eye View - SciDB Testbed at NERSC Pioneers High Usability Big Data Analytic Infrastructure. Motivation? It's painful to manage and analyze terabytes...

  11. MongoDB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the language specific client API. Here we show you how to use the pymongo client for Python % module load python % module load pymongo To access MongoDB through your python code...

  12. LANS DB PENSION PLAN

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 2010 u:\my documents\pension plan\revised tcp1 db plan spd dec 2010.doc LANS Defined Benefit Pension Plan Summary Plan Description This Summary Plan Description (SPD) is intended to provide a summary of the principal features of the LANS Defined Benefit Pension Plan ("Plan") and is not meant to interpret, extend or change the Plan in any way. This SPD will continue to be updated. Please check back on a regular basis for the most recent version. Nothing in the Plan and/or this

  13. DB Climate Change Advisors DBCCA | Open Energy Information

    Open Energy Info (EERE)

    DB Climate Change Advisors DBCCA Jump to: navigation, search Name: DB Climate Change Advisors (DBCCA) Place: New York, New York Product: New York-based climate change investement...

  14. DB-Netz AG Offices

    High Performance Buildings Database

    Hamm, Germany The new office building for DB Netz AG was designed by the collaborative team of Architrav Architects and the Buildings Physics and Technical Building Services group of the University of Karlsruhe. The team developed an energy efficient building concept for the 64,304 sqft office building, located in Hamm, Germany. The design concept of the building is dominated by architectural solutions for ventilation, cooling and lighting. Use of HVAC and electric lighting is minimized as much as possible.

  15. Using SciDB to Support Photon Science Data Analysis

    SciTech Connect (OSTI)

    Becla, Jack; Wang, Daniel; lim, Kian-Tat; /SLAC

    2012-02-15

    Array data analytic systems like SciDB hold great potential to accelerate processing data from SLAC's Linac Coherent Light Source and other experiments. SciDB is unique in its ability to integrate storage and processing of array data efficiently, providing both space-efficient storage and out-of-memory efficient parallel array processing. We describe a recent effort to leverage SciDB to store and process LCLS data. The work includes development of software to import data into SciDB, subsequent benchmarks, and interactive manipulation of data in SciDB.

  16. NERSC Accelerates Scientific Analysis with SciDB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Accelerates Scientific Analysis with SciDB NERSC Accelerates Scientific Analysis with SciDB August 26, 2015 Linda Vu, +1 510 495 2402, lvu@lbl.gov Pic-from-posterrevised-1.jpg SciDB harnesses parallel architectures for fast analysis of terabyte (TBs) arrays of scientific data. This collage illustrates some of the scientific areas that have benefited from NERSC's implementation of SciDB, including astronomy, biology and climate. (Image Credit: Yushu Yao, Berkeley Lab) Science is swimming in

  17. PASSBY(with FitToDB)

    Energy Science and Technology Software Center (OSTI)

    2002-08-28

    The PASSBY program is used to operate the Sensor for Measurement and analysis of radiation transients (SMART). The unit records triggers an "Event" upon detecting an increase in count rate recorded with a sodium iodide gamma-ray spectrometer. Background radiation levels are monitored continuously and background spectra are updated at 60 second intervals if no radiation sources are present other than those in the natural background. the system accepts input from an optional neutron counter. Inmoreaddition to spectral information, the location, determined with an internal GPS and the compass bearing are reported via either an RF modem or a serial cable. The gamma-ray spectra are analyzed to determine which isotopes are present and confidence levels are assigned. The analysis is performed using the FitToDB algorithm, is described as follows. The automatic identification algorithm FitToDB algorithm enables the automatic identification of gamma-ry emitting isotopes in shielded sources. FitToDB can identify combinations of up to ten isotopes, each of which may be viewed through different shielding materials. The algorithm runs rapidly (within about 3 seconds on a 100 MHz Pentium-class processor), and can be compiled to run both DOS and Windows operating systems. Computational speed and system interoperability issues are addressed by the approach of interpolating spectra from an existing database of computed templates rather than performing detector response functions calculations within the algorithm.less

  18. NERSC Accelerates Scientific Analysis with SciDB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    build SciDB into their normal science workflows, with the assumption that the lessons learned from each case study would provide insight into how to create new technologies and...

  19. T-594: IBM solidDB Password Hash Authentication Bypass Vulnerability

    Broader source: Energy.gov [DOE]

    This vulnerability could allow remote attackers to execute arbitrary code on vulnerable installations of IBM solidDB. Authentication is not required to exploit this vulnerability.

  20. untitled

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BREA POWER II, LLC'S OLINDA COMBINED CYCLE ELECTRIC GENERATING PLANT FUELED BY WASTE LANDFILL GAS, BREA, CALIFORNIA U.S. Department of Energy National Energy Technology Laboratory October 2010 DOE/EA-1744 ACRONYMS AND ABBREVIATIONS CEQA California Environmental Quality Act CFR Code of Federal Regulations CHP combined heat and power CO carbon monoxide dBA A-weighted decibel DOE U.S. Department of Energy (also called the Department) EA environmental assessment EPA U.S. Environmental Protection

  1. ORAU Team

    Broader source: Energy.gov (indexed) [DOE]

    Paducah Gaseous Diffusion Plant Draft Environmental Assessment for Potential Land and Facilities Transfers, McCracken County, Kentucky U.S. Department of Energy Portsmouth/Paducah Project Office June 2015 DOE/EA-1927 ACRONYMS AND ABBREVIATIONS CEQ Council on Environmental Quality CERCLA Comprehensive Environmental Response, Compensation, and Liability Act of 1980 CFR Code of Federal Regulations dBA A-weighted decibel DOE U.S. Department of Energy DUF 6 depleted uranium hexafluoride EA

  2. untitled

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BREA POWER II, LLC'S OLINDA COMBINED CYCLE ELECTRIC GENERATING PLANT FUELED BY WASTE LANDFILL GAS, BREA, CALIFORNIA U.S. Department of Energy National Energy Technology Laboratory October 2010 DOE/EA-1744 ACRONYMS AND ABBREVIATIONS CEQA California Environmental Quality Act CFR Code of Federal Regulations CHP combined heat and power CO carbon monoxide dBA A-weighted decibel DOE U.S. Department of Energy (also called the Department) EA environmental assessment EPA U.S. Environmental Protection

  3. DOE/EA-1927, Paducah Gaseous Diffusion Plant Final Environmental Assessment for Potential Land and Facilities Transfers, McCracken County, Kentucky

    Office of Environmental Management (EM)

    Paducah Gaseous Diffusion Plant Final Environmental Assessment for Potential Land and Facilities Transfers, McCracken County, Kentucky U.S. Department of Energy Portsmouth/Paducah Project Office December 2015 DOE/EA-1927 ACRONYMS AND ABBREVIATIONS CEQ Council on Environmental Quality CERCLA Comprehensive Environmental Response, Compensation, and Liability Act of 1980 CFR Code of Federal Regulations dBA A-weighted decibel DOE U.S. Department of Energy DUF 6 depleted uranium hexafluoride EA

  4. PylotDB - A Database Management, Graphing, and Analysis Tool Written in Python

    Energy Science and Technology Software Center (OSTI)

    2012-01-04

    PylotDB, written completely in Python, provides a user interface (UI) with which to interact with, analyze, graph data from, and manage open source databases such as MySQL. The UI mitigates the user having to know in-depth knowledge of the database application programming interface (API). PylotDB allows the user to generate various kinds of plots from user-selected data; generate statistical information on text as well as numerical fields; backup and restore databases; compare database tables acrossmore » different databases as well as across different servers; extract information from any field to create new fields; generate, edit, and delete databases, tables, and fields; generate or read into a table CSV data; and similar operations. Since much of the database information is brought under control of the Python computer language, PylotDB is not intended for huge databases for which MySQL and Oracle, for example, are better suited. PylotDB is better suited for smaller databases that might be typically needed in a small research group situation. PylotDB can also be used as a learning tool for database applications in general.« less

  5. MvirDB: Microbial Database of Protein Toxins, Virulence Factors and Antibiotic Resistance Genes for Bio-Defense Applications

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Zhou, C. E.; Smith, J.; Lam, M.; Zemla, M. D.; Slezak, T.

    MvirDB is a cenntralized resource (data warehouse) comprising all publicly accessible, organized sequence data for protein toxins, virulence factors, and antibiotic resistance genes. Protein entries in MvirDB are annotated using a high-throughput, fully automated computational annotation system; annotations are updated periodically to ensure that results are derived using current public database and open-source tool releases. Tools provided for using MvirDB include a web-based browser tool and BLAST interfaces. MvirDB serves researchers in the bio-defense and medical fields. (taken from page 3 of PI's paper of same title published in Nucleic Acids Research, 2007, Vol.35, Database Issue (Open Source)

  6. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    13 Scanning ARM Cloud Radar (X/Ka/W-SACR) K Widener N Bharadwaj K Johnson June 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research K Widener/N Bharadwaj/K Johnson, June 2012, DOE/SC-ARM/TR-113 iii Acronyms and Abbreviations AGL above ground level ARM Atmospheric Radiation Measurement (Climate Research Facility) C band frequencies between 4 GHz and 8 GHz dB decibel dBi antenna gain referenced to isotropic radiator dBm decibel

  7. Public Access to FUSRAP Elimination Reports. " D.B. Diggin, HR-83

    Office of Legacy Management (LM)

    'EM-421 ' ' ,y:. .: Public Access to FUSRAP Elimination Reports. " D.B. Diggin, HR-83 !I am attaching reports for the evaluation and elimination of a from the Department's Formerly Utilized Sites Remedial Action .(FUSRAP). Please enter this material into the Public Reading Forrestal Building. This process completes FUSRAP activitjes facilities. Our protocol requires that these records be avail Public Reading Room for at least 3'years; however, if possible retained for five years.' This

  8. Low-Cost Direct Bonded Aluminum (DBA) Substrates

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for mass production and that produces high adhesive strength of the ceramic-metal interfaces. Consider the fabrication and use of low-cost AlN as a potential (and...

  9. ORNL: Low-Cost Direct Bonded Aluminum (DBA) Substrates (Agreement ID:23278)

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  10. ALLETE Inc., d/b/a Minnesota Power Smart Grid Project | Open...

    Open Energy Info (EERE)

    smart meter network by deploying an additional 8,000 meters and new measurement and automation equipment. This will also create a dynamic pricing program.1 Allete, which does...

  11. Denton County Electric Cooperative d/b/a CoServ Electric Smart...

    Open Energy Info (EERE)

    CoServ Electric's service territory and explores the application of distribution automation and customer systems. The project is aimed at improving customer understanding of...

  12. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    06 Ka-Band ARM Zenith Radar (KAZR) K Widener N Bharadwaj K Johnson February 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research K Widener/N Bharadwaj/K Johnson, February 2012, DOE/SC-ARM/TR-106 iii Acronyms and Abbreviations ARM Atmospheric Radiation Measurement (Climate Research Facility) ARSCL Active Remote Sensing of Clouds C band frequencies between 4 GHz and 8 GHz dB decibel dBi antenna gain referenced to isotropic

  13. ZipperDB: Predictions of Fibril-forming Segments within Proteins Identified by the 3D Profile Method (from the UCLA-DOE Institute for Genomics and Proteomics)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Goldschmidt, L.; Teng, P. K.; Riek, R.; Eisenberg, D.

    ZipperDB contains predictions of fibril-forming segments within proteins identified by the 3D Profile Method. The UCLA-DOE Institute for Genomics and Proteomics has analyzed over 20,000 putative protein sequences for segments with high fibrillation propensity that could form a "steric zipper"two self-complementary beta sheets, giving rise to the spine of an amyloid fibril. The approach is unique in that structural information is used to evaluate the likelihood that a particular sequence can form fibrils. [copied with edits from http://www.doe-mbi.ucla.edu/]. In addition to searching the database, academic and non-profit users may also submit their protein sequences to the database.

  14. ZipperDB: Predictions of Fibril-forming Segments within Proteins Identified by the 3D Profile Method (from the UCLA-DOE Institute for Genomics and Proteomics)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Goldschmidt, L.; Teng, P. K.; Riek, R.; Eisenberg, D.

    ZipperDB contains predictions of fibril-forming segments within proteins identified by the 3D Profile Method. The UCLA-DOE Institute for Genomics and Proteomics has analyzed over 20,000 putative protein sequences for segments with high fibrillation propensity that could form a "steric zipper"ùtwo self-complementary beta sheets, giving rise to the spine of an amyloid fibril. The approach is unique in that structural information is used to evaluate the likelihood that a particular sequence can form fibrils. [copied with edits from http://www.doe-mbi.ucla.edu/]. In addition to searching the database, academic and non-profit users may also submit their protein sequences to the database.

  15. db03.book

    National Nuclear Security Administration (NNSA)

    Water Resources Data Nevada Water Year 2003 By Emil L. Stockton, Clifford Z. Jones, Ryan C. Rowland, and Rose L. Medina Water-Data Report NV-03-1 U.S. Department of the Interior U.S. Geological Survey Prepared in Cooperation with the State of Nevada and with other agencies U.S. Department of the Interior Gale A. Norton, Secretary U.S. Geological Survey Charles G. Groat, Director 2003 U.S. Geological Survey 333 West Nye Lane Carson City, NV 89706 (775)887-7600 Information about the USGS, Nevada

  16. Programs for Entering Data into the SBH Database

    Energy Science and Technology Software Center (OSTI)

    1995-11-28

    DB DATA ENTRY is a suite of programs that enable entry of data into the DB SbH database in batch mode. The front-end consists of the DBI and DBA programs, which are written in UNIX-shell style and a set of Sybase Transact-SQL stored procedures. The programs facilitate entry of the complete record of hybridization experiments, including the information about distribution of clones on microtiter plates, distribution of plates on filters, probe names and sequences, hybridizationmoreintensities, scanning, image analysis, etc.less

  17. Identification of limiting case between DBA and SBDBA (CL break area sensitivity): A new model for the boron injection system

    SciTech Connect (OSTI)

    Gonzalez Gonzalez, R.; Petruzzi, A.; D'Auria, F.; Mazzantini, O.

    2012-07-01

    Atucha-2 is a Siemens-designed PHWR reactor under construction in the Republic of Argentina. Its geometrical complexity and (e.g., oblique Control Rods, Positive Void coefficient) required a developed and validated complex three dimensional (3D) neutron kinetics (NK) coupled thermal hydraulic (TH) model. Reactor shut-down is obtained by oblique CRs and, during accidental conditions, by an emergency shut-down system (JDJ) injecting a highly concentrated boron solution (boron clouds) in the moderator tank, the boron clouds reconstruction is obtained using a CFD (CFX) code calculation. A complete LBLOCA calculation implies the application of the RELAP5-3D{sup C} system code. Within the framework of the third Agreement 'NA-SA - Univ. of Pisa' a new RELAP5-3D control system for the boron injection system was developed and implemented in the validated coupled RELAP5-3D/NESTLE model of the Atucha 2 NPP. The aim of this activity is to find out the limiting case (maximum break area size) for the Peak Cladding Temperature for LOCAs under fixed boundary conditions. (authors)

  18. Data:Dba74d36-87bb-4a6d-a55b-67d341da9431 | Open Energy Information

    Open Energy Info (EERE)

    contentdampacificpowerdocAboutUsRatesRegulationWashingtonApprovedTariffsWAPriceSummary.pdf Source Parent: https:www.pacificpower.netaboutrrwri.html Comments...

  19. INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - MILWAUKEE WORM DRIVE CIRCULAR SAW OENHP{number_sign}: 2001-02, VERSION A

    SciTech Connect (OSTI)

    Unknown

    2002-01-05

    Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactively contaminated glove boxes at the Department of Energy's (DOE) Los Alamos facility. The Milwaukee worm drive circular saw was assessed on August 14, 2001. During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The Milwaukee worm drive circular saw is a hand-held tool with a 7 1/4-inch diameter circular blade for cutting wood. The saw contains a fixed upper and a retractable lower blade guard to prevent access to the blade during use. The unit is operated with an on/off guarded trigger switch; and is supported with a handgrip mounted on top of the saw. An adjustable lever sets the depth of cut. The retractable blade guard permits blind or plunge cuts and protects from blade access during shutdown and blade coast. Kickback, the sudden reaction to a pinched blade, is possible when using this saw and could cause the saw to lift up and out of the work piece toward the operator. Proper work position and firm control of the saw minimizes the potential for a sprain or strain. Care needs to be exercised to support the work piece properly and to not force the tool. Personal noise sampling indicated that one worker was near the Occupational Safety and Health Administration's (OSHA) Action Level of 85 decibels (dBA) while the other was at the Action Level with time-weighted averages (TWA's) of 82.7 and 84.6 dBA, respectively. These data are not entirely representative as they were gathered during a simulation and not at the actual worksite. Additional sampling should be conducted on-site, but the workers should wear hearing protection until it is determined that it is no longer necessary. Air sampling was performed while the workers dismantled the fiberglass-reinforced crates. The total nuisance dust sample for the Milwaukee circular saw was 36.07 milligrams per cubic meter (mg/m{sup 3}), which is much higher than the OSHA Permissible Exposure Limit (PEL) of 15 mg/m{sup 3} and the American Conference of Governmental Industrial Hygienists' (ACGIH) Threshold Limit Value (TLV) of 10 mg/m{sup 3}. Galson Laboratories considered the fiber analysis void due to the overloading of the filter. The PEL for fiberglass is 1 fiber per cubic centimeter (f/cc).

  20. DB-6 Precedent Transactions.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of 2 Precedent Capital Markets Transactions for U.S. Transmission Projects Date Project ... Energy Investors Funds and Starwood Capital Group 97,000,000 Jul-05 Neptune ...

  1. HIV/Cancer DB Match Document

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    COLLECTION AND VERIFICATION OF DATA FOR MATCHED RECORDS FROM US CANCER AND HIVAIDS REGISTRIES Janice Watkins, Oak Ridge Associated Universities, T. Borges, Robert Stafford, Oak...

  2. db, Version 0.2.x

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or JSON format. Licensing Status: Available for Express Licensing . This software is open source. To download, please visit github. For more information, contact...

  3. INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - PORTER-CABLE CIRCULAR SAW OENHP: 2001-04, VERSION A

    SciTech Connect (OSTI)

    Unknown

    2002-01-15

    Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactively contaminated glove boxes at the Department of Energy's (DOE) Los Alamos facility. The Porter-Cable circular saw was assessed on August 15-16, 2001 (Porter-Cable No.1 and Porter-Cable No.2, respectively). During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The Porter-Cable saw is a straightforward machine for cutting wood of varying thickness. The blade is fully guarded with a fixed upper and a lower retractable guard. The lower guard retracts as the blade engages the work piece. The unit is operated with an on/off guarded trigger switch and is supported with a handgrip mounted near the front of the saw. The saw is equipped with a directional nozzle, which aims sawdust away from the operator and the line of cut. An optional vacuum system, attached to the directional nozzle, is used to remove and collect dust. During the demonstration of Porter-Cable No.1, personal noise sampling indicated that one worker was under and one was at the Occupational Safety and Health Administration's (OSHA) Action Level of 85 decibels (dBA) with time-weighted averages (TWA's) of 82.7 and 84.6 dBA, respectively. During the demonstration of Porter-Cable No.2, however, both workers did exceed the Action Level with TWA's of 89.7 and 90.0 dBA. These data are not entirely representative as they were gathered during a simulation and not at the actual worksite. Additional sampling should be conducted on-site, but the workers should wear hearing protection until it is determined that it is no longer necessary. The total nuisance dust sample for Porter-Cable No.1 was 3.53 milligrams per cubic meter (mg/m{sup 3}), which is lower than the OSHA Permissible Exposure Limit (PEL) of 15 mg/m{sup 3} and the American Conference of Governmental Industrial Hygienists' (ACGIH) Threshold Limit Value (TLV) of 10 mg/m{sup 3}. Porter-Cable No.2's nuisance dust results yielded a value of 22.05 mg/m{sup 3}, which is over the PEL and TLV. The fiber analysis for the first demonstration yielded 12.9 fibers per cubic centimeter (f/cc), which is much higher than the PEL of 1 f/cc. Galson Laboratories considered the fiber analysis for the second demonstration void due to the overloading of dust on the filter. Kickback, the sudden reaction to a pinched blade, is possible with this saw and could cause the saw to lift up and out of the work piece and toward the operator. Proper work position and firm control of the saw minimizes the potential for a sprain or strain. Care needs to be exercised to support the work piece properly and to not force the tool.

  4. INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - EVOLUTION 180 CIRCULAR SAW OENHP: 2001-03, VERSION A

    SciTech Connect (OSTI)

    Unknown

    2002-01-25

    Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactively contaminated gloveboxes at the Department of Energy's (DOE) Los Alamos facility. The Evolution 180 circular saw was assessed on August 14, 2001. During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The Evolution 180 is a portable, metal cutting circular saw with a 7-inch diameter blade. The blade is contained within the main housing and has a retractable lower blade guard to prevent operator access to the blade during operation and shutdown. The saw is equipped with a chip collector. The maximum cutting thickness for metal is one-quarter inch and can cut steel tubing and pipe 2 inches in diameter. The unit is operated with an on/off guarded trigger switch and is supported with the hand guide mounted to the side of the saw. An adjustable lever sets the depth of the cut. The machine's circuitry will automatically shut the saw motor off if excessive overload is detected during operation. The one-half hour demonstration involved vertical and horizontal cuts and blade changes. During this process, operators experienced binding of the saw. This caused the blade to become hot, causing the sawdust collected in the chip collector to smoke. Care should be exercised to use the appropriate blade for the application, operator training, and personal protective equipment (PPE). Personal noise sampling indicated that neither worker was over the Occupational Safety and Health Administration's (OSHA) Action Level of 85 decibels (dBA) with time-weighted averages (TWA's) of 69.1 and 68.8 dBA. The personal noise sample taken during the special demonstration with the stainless steel plate had a TWA of 69.8 dBA. These data are not entirely representative as they were gathered during a simulation and not at the actual worksite. Additional sampling should be conducted on-site, but the workers should wear hearing protection until it is determined that it is no longer necessary. The total nuisance dust sample for the Evolution 180 circular saw was 3.5 milligrams per cubic meter (mg/m{sup 3}), which is lower than the OSHA Permissible Exposure Limit (PEL) of 15 mg/m{sup 3} and the American Conference of Governmental Industrial Hygienists' (ACGIH) Threshold Limit Value (TLV) of 10 mg/m{sup 3}. The fiber analysis yielded 1.74 fibers per cubic centimeter (f/cc), which is above the PEL of 1 f/cc. Although the nuisance dust levels were low, fiberglass dust levels were higher than the PEL. Since fiberglass dust is known to be a strong skin irritant and a possible human carcinogen, the workers should continue to wear appropriate suits and gloves, as well as a full-face air-purifying respirator. The respirator should be equipped with a combination organic vapor and acid gas cartridge in combination with a High Particulate Air (HEPA) filter, since particulate filter, since during the demonstration, the workers complained of an odd smell, which may have been from the breakdown of the fiberglass.

  5. INTERNATIONAL UNION OF OPERATING ENGINEERS NATIONAL HAZMAT PROGRAM - DEWALT RECIPROCATING SAW OENHP{number_sign}: 2001-01, VERSION A

    SciTech Connect (OSTI)

    Unknown

    2002-01-31

    Florida International University's (FIU) Hemispheric Center for Environmental Technology (HCET) evaluated five saws for their effectiveness in cutting specially prepared fiberglass-reinforced plywood crates. These crates were built as surrogates for crates that presently hold radioactively contaminated glove boxes at the Department of Energy's (DOE) Los Alamos facility. The DeWalt reciprocating saw was assessed on August 13, 2001. During the FIU test of efficacy, a team from the Operating Engineers National Hazmat Program (OENHP) evaluated the occupational safety and health issues associated with this technology. The DeWalt reciprocating saw is a hand-held industrial tool used for cutting numerous materials, including wood and various types of metals depending upon the chosen blade. Its design allows for cutting close to floors, corners, and other difficult areas. An adjustable shoe sets the cut at three separate depths. During the demonstration for the dismantling of the fiberglass-reinforced plywood crate, the saw was used for extended continuous cutting, over a period of approximately two hours. The dismantling operation involved vertical and horizontal cuts, saw blade changes, and material handling. During this process, operators experienced vibration to the hand and arm in addition to a temperature rise on the handgrip. The blade of the saw is partially exposed during handling and fully exposed during blade changes. Administrative controls, such as duty time of the operators and the machine, operator training, and personal protective equipment (PPE), such as gloves, should be considered when using the saw in this application. Personal noise sampling indicated that both workers were exposed to noise levels exceeding the Occupational Safety and Health Administration's (OSHA) Action Level of 85 decibels (dBA) with time-weighted averages (TWA's) of 88.3 and 90.6 dBA. Normally, a worker would be placed in a hearing conservation program if his TWA was greater than the Action Level. In this case, however, monitoring was conducted during a simulation, not during the actual work conducted at the worksite. Additional sampling should be conducted at the worksite to determine the actual noise levels for the workers. Until it is determined that the actual TWA's are less than the Action Level, the workers should use PPE. A training program on the proper use and wearing of the selected PPE should be provided to each worker. Nuisance dust monitoring yielded a concentration of 10.69 milligrams per cubic meter (mg/m{sup 3}). Although this is less than the OSHA Permissible Exposure Limit (PEL) of 15 mg/m{sup 3}, it is above the American Conference of Governmental Industrial Hygienists' (ACGIH) Threshold Limit Value (TLV) of 10 mg/m{sup 3}. Fiberglass dust monitoring yielded a fiber count of 1.7 fibers per cubic centimeter (f/cc). This is above the PEL and the TLV of 1.0 f/cc. Therefore, controls should be implemented (engineering or PPE) to reduce the workers' exposure to the dust. Respirators should be used if engineering controls do not sufficiently control the dust or fiberglass generated. Respirators should be equipped with an organic vapor and acid gas cartridge with a High Efficiency Particulate Air (HEPA) filter, since during the demonstration, the workers complained of an odd smell, which may have been from the breakdown of the fiberglass.

  6. 20130212 Parallel DB NUG Biz Meeting.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of data, I need an easy, fast, interactive way to filter, aggregate, ... - 3 - Yushu Yao Data is too big. Old way of sharing data over web is no longer efficient (if at all...

  7. Where is DB config stored? | OpenEI Community

    Open Energy Info (EERE)

    - 13:41 Groups Menu You must login in order to post into this group. Recent content Hello-Sorry for the delay in... Use of DynamicAggregationProcessor I submitted a pull...

  8. TeVSymposium12MasterDB (PPD-115151)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dubna 134. Georgy Golovanov Florida State University 135. Alicia Gomez Instituto de Fisica de Cantabria 136. Gervasio Gomez Colombian Consulate 137. Jose Fernando Gomez Mora...

  9. Environmental assessment of air quality, noise and cooling tower drift from the Jersey City Total Energy Demonstration

    SciTech Connect (OSTI)

    Davis, W.T.; Kolb, J.O.

    1980-06-01

    This assessment covers three specific effects from the operation of the Total Energy (TE) demonstration: (1) air quality from combustion emissions of 600 kW diesel engines and auxiliary boilers fueled with No. 2 distillate oil, (2) noise levels from TE equipment operation, (3) cooling tower drift from two, 2220 gpm, forced-draft cooling towers. For the air quality study, measurements were performed to determine both the combustion emission rates and ground-level air quality at the Demonstration site. Stack analysis of NO/sub x/, SO/sub 2/, CO, particulates, and total hydrocarbons characterized emission rates over a range of operating conditions. Ground-level air quality was monitored during two six-week periods during the summer and winter of 1977. The noise study was performed by measuring sound levels in db(A) in the area within approximately 60 m of the CEB. The noise survey investigated the effects on noise distribution of different wind conditions, time of day or night, and condition of doors - open or closed - near the diesel engines in the CEB. In the cooling tower study, drift emission characteristics were measured to quantify the drift emission before and after cleaning of the tower internals to reduce fallout of large drift droplets in the vicinity of the CEB.

  10. Categorical ExclusIon Determination Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB .5 - Cooling water system...

  11. Project Title: LIFE Center West (4498) Program or Program Office...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 104 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  12. Project Title: Plant Lab Capabilities Project (4512) Program...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB I ,4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  13. Application for Presidential Permit OE Docket No. PP-230-3 International

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transmission Company d/b/a ITCTransmission | Department of Energy Permit OE Docket No. PP-230-3 International Transmission Company d/b/a ITCTransmission Application for Presidential Permit OE Docket No. PP-230-3 International Transmission Company d/b/a ITCTransmission Application for Presidential Permit authorizing International Transmission Company to construct, operate, and maintain electric transmission facilities at teh U.S. - Canada Border. PDF icon PP-230-3 International Transmission

  14. Sandia National Laboratories: Working with Sandia: Procurement...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prop & Direct Change Attachments (MS Word) Posters Equal Employment Opportunity Davis-Bacon Wage Poster State DBA Poster Requirements (MS Excel) Safety The construction community...

  15. Compliance Certification Enforcement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proposed Civil Penalty that Northland Corporation dba AGA Marvel failed to certify cooking products as compliant with the applicable energy conservation standards. June 23,...

  16. Recovery Act | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Electric, DBA Sandbar. Solar Power Generates Big Savings in Salinas, California A new solar panel array at Monterey County's Laurel Yard Complex is expected to save the county...

  17. Property:CoverageMap | Open Energy Information

    Open Energy Info (EERE)

    Inc., dba Minnesota Power Smart Grid Project + SmartGridMap-ALLETEMNPower.JPG + American Transmission Company LLC II Smart Grid Project + SmartGridMap-AmericanTransmissionII....

  18. Motion to Intervene Out of Time and Comments of FirstEnergy Service...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Late Motion to Intervene from FirstEnergy Service Corporation Application for Presidential Permit OE Docket No. PP-230-3 International Transmission Company dba ITCTransmission

  19. EECBG Program Notice 09-002A

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Funds, Capitalized Interest Funds, and Principal Sinking Fund Payments NEPA, Davis Bacon Act (DBA), and the Buy American provision requirements apply similarly to debt service...

  20. Davis Bacon Frequently Asked Questions (FAQs) | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Davis Bacon Frequently Asked Questions (FAQs) Davis Bacon Frequently Asked Questions (FAQs) PDF icon DBA FAQs More Documents & Publications Davis-Bacon Act - Under the American...

  1. Santa Monica, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Inc. Solar reserve SolarReserve The Clean Energy Fund Vision Industries dba Vision Motor Corp Registered Financial Organizations in Santa Monica, California US Renewables...

  2. Domestic Uranium Production Report

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Resources, Inc. dba Cameco Resources Smith Ranch-Highland Operation Converse, Wyoming ... Uranium is first processed at the Nichols Ranch plant and then transported to the Smith ...

  3. Domestic Uranium Production Report - Quarterly

    Gasoline and Diesel Fuel Update (EIA)

    Resources, Inc. dba Cameco Resources Smith Ranch-Highland Operation Converse, Wyoming ... Uranium is first processed at the Nichols Ranch plant and then transported to the Smith ...

  4. Application for presidential permit OE Docket No. PP-230-4 Internation...

    Energy Savers [EERE]

    of PJM Interconnection, L.L.C. to Answer of International Transmission Company dba ITC Transmission and Supplemental Comments on Behalf of the Midwest Independent...

  5. Pulmonary metabolism of dibenz(a,j)acridine: A carcinogenic heterocyclic aromatic: Final report for period September 1, 1982-June 30, 1986

    SciTech Connect (OSTI)

    Warshawsky, D.

    1987-07-01

    The metabolism of the carcinogenic N-heterocyclic aromatic, dibenz(a,j)-acridine (DBA) was investigated in the isolated perfused lung (IPL) preparation. A significantly increased rate of metabolism was observed for DBA in benzo(a)-pyrene (BaP) and DBA-pretreated animals. This resulted in marked increases in conjugation, in particular sulfates and thioethers, and the distribution of conjugates and total metabolites in blood and lung. When Fe/sub 2/O/sub 3/ was coadministered with DBA to the IPL, the rate of metabolism was significantly decreased with respect to control experiments. This resulted in increased distributions of sulfate and thioether conjugates in blood. Spectroscopic analyses and microsomal enzyme analyses were used in the characterization of the four metabolites identified in the lung. The major nonconjugated metabolite was the 3,4 dihydrodiol of DBA and the three minor metabolites were the 4 and 3 phenol of DBA and a dihydroxy compound of DBA. The results indicate that in the lung DBA is metabolized in a manner similar to that of BaP but different from that of dibenzo-(c,g)carbazole. It is, therefore, apparent that the metabolism of N-heterocyclic aromatics are related to the aromaticity of the heteroatom-containing ring and the solubility of compound, as well as the specific enzymes responsible for activation of the compound. 115 refs., 78 figs., 24 tabs.

  6. Canister storage building compliance assessment SNF project NRC equivalency criteria - HNF-SD-SNF-DB-003

    SciTech Connect (OSTI)

    BLACK, D.M.

    1999-08-11

    This document presents the Project's position on compliance with the SNF Project NRC Equivalency Criteria--HNF-SD-SNF-DE-003, Spent Nuclear Fuel Project Path Forward Additional NRC Requirements. No non-compliances are shown The compliance statements have been reviewed and approved by DOE. Open items are scheduled to be closed prior to project completion.

  7. D-B CONST Exhibit A General Conditions (Rev. 4.3, 9-27-13)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3, 9/27/13) Exhibit A General Conditions Page 1 of 29 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2 AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Apr 2013) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  8. D-B CONST Exhibit A General Conditions (Rev. 4.3, 9-27-13)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    inspection and testing. It is conclusive except for latent defects, gross mistakes or fraud. "Final Completion", if used in this subcontract or task order, means the point when...

  9. Categorical ExclusIon DetermInatIon J-iornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  10. Project Title: X-Ray Machine Replacement Project (4552)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB I.S - Cooling water system...

  11. CategorIcal Exclusion Determination Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  12. ~l Categorical Exclusion DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  13. Categorical Exclusion l)etermlnatIon FornI

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  14. Categorical Exclusion 4568, Crane Removal Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  15. Categorical Exclusion DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  16. Project Title: Office Trailers for ARRA Project (4502)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  17. Categorical Exclusion Determination Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  18. Categoncal Exclusion IJctermil1ation Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling waler system...

  19. Categorical ExclusIon DetermInation Fom1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  20. Project Title: New Non SNM Door (4503) Program or Program Office...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  1. Categorical Exclusion Determination Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  2. East End Scales (4499)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB I.S - Cooling water system...

  3. Quorum: Proposed Penalty (2014-CE-32013)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Davoil, Inc. d/b/a Quorum International, Inc. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  4. Northland: Proposed Penalty (2014-CE-23002)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Northland Corporation d/b/a AGA Marvel failed to certify cooking products as compliant with the applicable energy conservation standards.

  5. Kichler: Proposed Penalty (2014-CE-32007)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that The L.D. Kiebler Co. d/b/a Kichler Lighting failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  6. Versonel: Proposed Penalty (2014-CE-21009)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Smart Surplus, Inc. d/b/a Versonel failed to certify refrigerators and residential clothes dryers as compliant with the applicable energy conservation standards.

  7. Yosemite: Proposed Penalty (2014-CE-32015)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Northern Central Distributing, Inc. d/b/a Yosemite Home Décor failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  8. American Recovery & Reinvestment Act of 2009 (Recovery Act or...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... for construction of a public building or public work of the U.S.? 10 DBA Requirements ... whose duties are manual or physical in nature. Mechanic: Is a skilled worker who ...

  9. American Standard: Proposed Penalty (2013-CW-3001)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that AS America, Inc., d/b/a American Standard Brands failed to certify a variety of water closets as compliant with the applicable water conservation standards.

  10. CNA: Proposed Penalty (2013-SE-1430)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that CNA International, Inc., d/b/a MC Appliance Corp. privately labeled and distributed noncompliant freezer Magic Chef model number HMCF7W in the U.S.

  11. Winix: Order (2012-CE-3607)

    Broader source: Energy.gov [DOE]

    DOE ordered Cloud 9 Marketing, Inc. d/b/a Winix, Inc., to pay a $8,000 civil penalty after finding Winix had failed to certify that certain models of dehumidifiers comply with the applicable energy conservation standards.

  12. SEMI-ANNUAL REPORT - PORT ARTHUR LNG - DKT. NO. 15-53-LNG - ORD...

    Broader source: Energy.gov (indexed) [DOE]

    SEMI-ANNUAL REPORTS FOR TEXAS LNG - TEXAS LNG - FTA - FE DKT. NO. 13-160-LNG - 3443 SEMI-ANNUAL REPORTS FOR WALLER LNG SERVICES, LLC DBA WALLER POINT LNG - FE DKT. NO. 12-152-LNG...

  13. MC Appliance: Proposed Penalty (2012-CE-1508)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that CNA International Inc. d/b/a MC Appliance Corporation failed to certify a variety of room air conditioners as compliant with the applicable energy conservation standards.

  14. Watermark Designs: Proposed Penalty (2010-CW-1404)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Watermark Designs Holdings, Ltd. d/b/a/ Watermark Designs, Ltd. failed to certify various showerheads as compliant with the applicable water conservation standards.

  15. CNA: Compromise Agreement (2013-SE-1430)

    Broader source: Energy.gov [DOE]

    DOE and CNA International, Inc., d/b/a MC Appliance Corp. entered into a Compromise Agreement to resolve a case involving the distribution in commerce of noncompliant freezers.

  16. Northland: Order (2014-CE-23002)

    Broader source: Energy.gov [DOE]

    DOE ordered Northland Corporation d/b/a AGA Marvel to pay a $16,000 civil penalty after finding Northland had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  17. Quorum: Order (2014-CE-32013)

    Broader source: Energy.gov [DOE]

    DOE ordered Davoil, Inc. d/b/a Quorum International, Inc. to pay a $8,000 civil penalty after finding Quorum had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  18. Winix: Proposed Penalty (2012-CE-3607)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Cloud 9 Marketing, Inc. d/b/a Winix, Inc. failed to certify dehumidifiers as compliant with the applicable energy conservation standards.

  19. Application for presidential permit OE Docket No. PP-230-2 and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PP-230-2 and PP-230-3 ITC Holdings Corporation Limited Partnership, International ... PP-230-3 International Transmission Company dba ITCTransmission PP-230-3 International ...

  20. PP-230-3 International Transmission Company | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PP-230-3 International Transmission Company dba ITCTransmission Application for presidential permit OE Docket No. PP-230-2 and PP-230-3 ITC Holdings Corporation Limited ...

  1. SEMI-ANNUAL REPORTS FOR - BEAR HEAD LNG CORPORATION AND BEAR...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEMI-ANNUAL REPORTS FOR - BEAR HEAD LNG CORPORATION AND BEAR HEAD (USA) LLC - FE DKT. NO. ... REPORTS FOR LNG DEVELOPMENT COMPANY, LLC (DBA Oregon LNG) - FE DKT. NO. 12-48-LNG - ...

  2. Application for Presidential Permit OE Docket No. PP-230-3 Internation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PP-230-3 International Transmission Company dba ITCTransmission Application for presidential permit OE Docket No. PP-230-2 and PP-230-3 ITC Holdings Corporation Limited ...

  3. Matthews Fan: Proposed Penalty (2014-CE-32012)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Matthews-Gerbar, Ltd. d/b/a Matthews Fan Company failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  4. Indiana's 6th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Ethanol LLC Mid States Tool and Machine Inc NuFuels LLC Ultra Soy of America DBA USA Biofuels Utility Companies in Indiana's 6th congressional district Bartholomew County...

  5. Indiana's 3rd congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Companies in Indiana's 3rd congressional district NuFuels LLC Ultra Soy of America DBA USA Biofuels Utility Companies in Indiana's 3rd congressional district City of Auburn,...

  6. Nevada's 2nd congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    2nd congressional district Arete Power Inc Biodiesel Solutions Inc BlackHawk Fund Brady Power Partners Chapeau Inc dba BluePoint Energy Inc China Recycling Energy Corp CREG...

  7. For Collaborators

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For Collaborators DocDB MINERvA Shift NuMI Near Hall DocDB Calendar Event Calendar ECL Shift Signup Our Wiki Starting at FNAL

  8. Project Title: Tin Whisker Mitigation (4532) Program or Program...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation OBI.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  9. A DESK GUIDE TO THE DAVIS-BACON ACT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE DBA Desk Guide - Rev. 1 July 30, 2012 A DESK GUIDE TO THE DAVIS-BACON ACT Prevailing Wage Requirements for Contractors on Federal Contracts and DBA-Covered Federally Financed or Assisted Construction Projects Introduction. The U. S. Department of Energy (DOE) has prepared this Desk Guide for the use of contractors and subcontractors performing work on construction projects under a federal contract, or under a statute authorizing federal financial assistance, that requires the application of

  10. A Desk Guide to the Davis-Bacon Act

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DESK GUIDE TO THE DAVIS-BACON ACT Prevailing Wage Requirements for Contractors on Federal Contracts and DBA-Covered Federally Financed or Assisted Construction Projects Introduction. The U. S. Department of Energy (DOE) has prepared this Desk Guide for the use of contractors and subcontractors performing work on construction projects under a federal contract, or under a statute authorizing federal financial assistance, that requires the application of Davis-Bacon Act (DBA or the Act) prevailing

  11. DOE - NNSA/NFO -- Centerra Contract Mods

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Doing Business > Contracts > Centerra Contract Modifications NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office G4S Government Solutions, Inc. (dba Centerra Nevada) Contract Modifications G4S Government Solutions (dba Centerra Nevada) provides security protective force and systems services at the Nevada National Security Site and North Las Vegas facility. Instructions: Click the document Name to view or download the Adobe PDF file marked with this icon ( ) [ PDF Help ] Name

  12. D-B CONST Ex A (Rev. 4.1, 4/9/13) Exhibit A General Conditions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on claims shall be paid at the rate established by the Secretary of the Treasury of the United States pursuant to Public Law 92-41 (85 Stat. 97). GC-37 BANKRUPTCY (Jun 2009) In...

  13. D-B CONST Ex A (Rev. 4.1, 4/9/13) Exhibit A General Conditions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1, 4/9/13) Exhibit A General Conditions Page 1 of 40 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2 AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Apr 2013) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  14. Microsoft Word - D-B CONST Appendix SFA-1 (Rev. 3.1, 5-22-15).doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    .1, 5/22/15) Appendix SFA-1 Page 1 of 7 Appendix SFA-1 FAR & DEAR Clauses Incorporated By Reference (a) The Federal Acquisition Regulation (FAR) and the Department of Energy Acquisition Regulation (DEAR) clauses which are incorporated by reference herein shall have the same force and effect as if printed in full text. (b) Full text of the referenced clauses may be accessed electronically at website address: FAR: http://farsite.hill.af.mil/vffara.htm DEAR:

  15. Microsoft Word - D-B CONST Exhibit A General Conditions (Rev. 5.2, 5-29-15).doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5.2, 5/29/15) Exhibit A General Conditions Page 1 of 33 EXHIBIT "A" GENERAL CONDITIONS TABLE OF CONTENTS GC Title Page GC-1 DEFINITIONS (Aug 2012) .......................................................................................................... 3 GC-2 AUTHORIZED REPRESENTATIVES, COMMUNICATIONS AND NOTICES (Apr 2013) ........................................................................................................................................... 3 GC-3 INDEPENDENT

  16. D-B CONST Ex A (Rev. 4.4, 12/15/14) Exhibit A General Conditions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    inspection and testing. It is conclusive except for latent defects, gross mistakes or fraud. "Final Completion", if used in this subcontract or task order, means the point when...

  17. D-B CONST Ex A (Rev. 4.2, 6/14/13) Exhibit A General Conditions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    inspection and testing. It is conclusive except for latent defects, gross mistakes or fraud. "Final Completion", if used in this subcontract or task order, means the point when...

  18. Advanced low noise cooling fans

    SciTech Connect (OSTI)

    Spek, H.F. van der; Nelissen, P.J.M.

    1995-02-01

    The results from an intensive research program show that it is possible to reduce the sound power level of cooling fans by 15 dB(A) by altering blade cord width and swept leading and trailing edge lines. Combination with the reduction of the pressure drop can result in a step of 20 dB(A) and a reduction with 25 percent of the absorbed power. Testing was conducted in accordance with recognized international measuring standards and the results will be presented, including consequences for cooling tower and condenser design.

  19. Vegetation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    /::vI Streams ~Rails 'R Utility ROW Roads oTES Plants (2) [2] Other Set-Asides D Three Rivers Landfill D Hydric Soils 380 Soils Soil Series and Phase DBaB DBaC .Pk _TrB _TuE _TuF _VaC o 380 760 1140 Meters N A sc Figure 6-1. Plant cOllllllunities and soils associated with the Beech-Hardwood Forest Set-Aside Area. 6-5 Set-Aside 6: Beech-Hardwood Forest

  20. DOE - NNSA/NFO -- Centerra Contract Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Award NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office G4S Government Solutions, Inc. (dba Centerra Nevada) Contract Award G4S Government Solutions (dba Centerra Nevada) provides security protective force and systems services at the Nevada National Security Site and North Las Vegas facility. Instructions: Click the document Name to view or download the Adobe PDF file marked with this icon ( ) [ PDF Help ] Name Title Description File Size Contract DE-NA0001435 - SF33.pdf Contract

  1. N A Vegetation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    N A Vegetation 680 Meters 340 Compartment 16 Soils o Soil Series and Phase DBaB DBaC DDoA DFuB DLuB .OcA .OrB [:] Rm .TrB .VeC Bay 4 340 Community _ Loblolly Pine _ Slash Pine D Upland Hardwood o Bottomland Hardwood _ Carolina Bay Wetland _ Deep water pool .*. TES Plants (1) o .Openwells cCV,. Utility ROW ~ Roads [ZJ SRS Bays I:~&j Hydric Soils Figure 21-2. Plant commllflities and soils associated with the Flamingo Bay Set-Aside Area. 21-7 Set-Aside 21: Flamingo Bay

  2. Meters Roads N Streams

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Meters Roads N Streams o Openwells E3i APT Site *. TES Plants (1) E2J Other Set-Asides lEI] Hydric Soils . 370 o 370 Soils Soil Series and Phase DBaB DBaC .Pk .TrB DTrC DTrD .TuE !iii TuF 740 Compartment 52 Compartment 53 N A sc Figure 5-1. Area. Plant communities and soils associated with the Oak Hickory Forest #1 Set-Aside 5-7 Set-Aside 5: Oak-Hickory Forest 1

  3. SEMI-ANNUAL REPORT - PORT ARTHUR LNG - DKT. NO. 15-53-LNG - ORD. 3698 |

    Energy Savers [EERE]

    Department of Energy - PORT ARTHUR LNG - DKT. NO. 15-53-LNG - ORD. 3698 SEMI-ANNUAL REPORT - PORT ARTHUR LNG - DKT. NO. 15-53-LNG - ORD. 3698 PDF icon October 2015 More Documents & Publications SEMI-ANNUAL REPORTS FOR TEXAS LNG - TEXAS LNG - FTA - FE DKT. NO. 13-160-LNG - 3443 SEMI-ANNUAL REPORTS FOR WALLER LNG SERVICES, LLC D/B/A WALLER POINT LNG - FE DKT. NO. 12-152-LNG - ORDER 3211 SEMI-ANNUAL REPORT FOR LNG DEVELOPMENT COMPANY, LLC (d/b/a OREGON LNG - NFTA*) FE DKT. NO. 12-77-LNG -

  4. Data:09b38559-96ea-466e-8e9d-b8d043094596 | Open Energy Information

    Open Energy Info (EERE)

    under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information...

  5. Data:B0c510db-7e64-4d8c-a9ae-f8521cbb8489 | Open Energy Information

    Open Energy Info (EERE)

    d8c-a9ae-f8521cbb8489 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic...

  6. Data:0e29685d-b8f7-4761-912f-72ffbfc4e856 | Open Energy Information

    Open Energy Info (EERE)

    under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information...

  7. Physical-Property Measurements on Core Samples from Drill-Holes...

    Open Energy Info (EERE)

    Physical-Property Measurements on Core Samples from Drill-Holes DB-1 and DB-2, Blue Mountain Geothermal Prospect, North-Central Nevada Jump to: navigation, search OpenEI Reference...

  8. Data Management

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    libraries (HDF5, NetCDF, ROOT) to represent and store scientific data. Read More Databases We provide database technologies (MongoDB, SciDB, MySQL, PostGreSQL) for our users...

  9. Project Title: NSY Drum Disposal (4504) Program or Program Office...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation B 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  10. Categorical ExcluSlonUetermlnation Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of technical exchange arrangements OA IS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and simulation DB 1.3 - Routine...

  11. Categorical ExclusIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation gB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB I.S - Cooling water system...

  12. Project Title: C31 Deployment (4501) Program or Program Office...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation DB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment oB1.5 - Cooling water system...

  13. Categoncal ExclusionlJetermlnation Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation IBB 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  14. Categorical ExclusIon DetermInation Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation 8B 1.3 * Routine maintenance and custodial services DB 1.4 * Air conditioning installation for existing equipment DB I.S - Cooling water system...

  15. Categorical Exclusion Determination 1"orn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation OB1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB I.S - Cooling water system...

  16. Categorical ExclusIon DetermInatIon Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation I8B 1.3 . Routine maintenance and custodial services DB 1.4 Air conditioning installation for existing equipment DB 1.5 * Cooling water system...

  17. Categoncal Exclusion DeterminahonFornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation &B 1.3 - Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  18. Categorical ExcluSIon Determination Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation I8lB 1.3 * Routine maintenance and custodial services DB 1,4 * Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  19. Categorical ExclusIon Determination Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation IRIB 1.3 Routine maintenance and custodial services DB 1.4 - Air conditioning installation for existing equipment DB 1.5 - Cooling water system...

  20. American Standard: Order (2013-CW-3001)

    Broader source: Energy.gov [DOE]

    DOE ordered AS America, Inc., d/b/a American Standard Brands to pay a $8,000 civil penalty after finding American Standard had failed to certify that certain models of water closets comply with the applicable water conservation standards.

  1. Teddico: Noncompliance Determination (2012-SE-5409)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to The Electrical Design, Development and Implementation Company d/b/a Teddico finding that a variety of basic models of magnetic probe-start metal halide lamp fixtures do not comport with the energy conservation standards.

  2. CX-011736: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Lutheran University Association, Inc. dba Valparaiso University - Solar Thermal Electrolytic Production of Magnesium from Magnesium Oxide CX(s) Applied: B3.6 Date: 11/21/2013 Location(s): Indiana Offices(s): Advanced Research Projects Agency-Energy

  3. Watermark Designs: Order (2010-CW-1404)

    Broader source: Energy.gov [DOE]

    DOE ordered Watermark Designs Holdings, Ltd. d/b/a Watermark Designs, Ltd. to pay a $135,104 civil penalty after finding Watermark Designs had failed to certify that various models of showerheads comply with the applicable water conservation standards.

  4. Kichler: Order (2014-CE-32007)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered The L.D. Kichler Co. d/b/a Kichler Lighting to pay a $8,000 civil penalty after finding Kichler had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  5. Yosemite: Order (2014-CE-32015)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Northern Central Distributing, Inc. d/b/a Yosemite Home Dcor to pay a $8,000 civil penalty after finding Yosemite had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  6. CNA: Noncompliance Determination (2013-SE-1430)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to CNA International, Inc., d/b/a MC Appliance Corp. finding that Magic Chef-brand model HMCF7W ("CNA model HMCF7W") does not comport with the energy conservation standards.

  7. Teddico: Proposed Penalty (2012-SE-5409)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that The Electrical Design, Development and Implementation Company d/b/a Teddico manufactured and distributed noncompliant metal halide lamp fixtures with magnetic probe-start ballasts in the U.S.

  8. MC Appliance: Order (2012-CE-1508)

    Broader source: Energy.gov [DOE]

    DOE ordered CNA International Inc. d/b/a MC Appliance Corporation to pay a $8,000 civil penalty after finding MC Appliance had failed to certify that certain models of room air conditioners comply with the applicable energy conservation standards.

  9. Versonel: Order (2014-CE-21009)

    Broader source: Energy.gov [DOE]

    DOE ordered Smart Surplus, Inc. d/b/a Versonel to pay a $8,000 civil penalty after finding Versonel had failed to certify that certain models of refrigerators and residential clothes dryers comply with the applicable energy conservation standards.

  10. State Energy Program Notice (10-004A), Energy Efficiency Conservation Block Grant Program Notice (10-005A), and Appliance Rebate Program Notice (10-001A)

    Broader source: Energy.gov [DOE]

    Guidance on Davis Bacon Act (DBA) requirements for American Reinvestment and Recovery Act of 2009 (ARRA)-funded rebate, grant and financing programs for individual homeowners conducted under the State Energy Program (SEP), Energy Efficiency and Conservation Block Grant (EECBG) program, and the appliance rebate program. Revised April 7, 2010.

  11. Environmental Effects on Power Electronic Devices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    09 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. PDF icon pmp_20_wereszczak.pdf More Documents & Publications Environmental Effects on Power Electronic Devices ORNL: Low-Cost Direct Bonded Aluminum (DBA) Substrates (Agreement ID:23278)

  12. Diffusion Databases for ICME | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ICME Diffusion Databases for ICME 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon lm036_warren_2011_o.pdf More Documents & Publications Diffusion Databases for Mg-ICME Vehicle Technologies Office: 2010 Lightweight Materials R&D Annual Progress Report Low-Cost Direct Bonded Aluminum (DBA) Substrates

  13. Teddico: Order (2012-SE-5409)

    Broader source: Energy.gov [DOE]

    DOE ordered The Electrical Design, Development and Implementation Company d/b/a Teddico to pay a $18,994 civil penalty after finding Teddico had manufactured and distributed in commerce in the U.S. 218 units of a variety of noncompliant metal halide lamp fixtures basic models.

  14. Matthews Fan: Order (2014-CE-32012)

    Broader source: Energy.gov [DOE]

    DOE ordered Matthews-Gerbar, Ltd. d/b/a Matthews Fan Company to pay a $8,000 civil penalty after finding Matthews had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  15. Nordyne: Proposed Penalty (2010-CE-01/0210)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Nordyne, LLC d/b/a Garrison Heating and Cooling Products failed to certify various residential central air conditioners and central air conditioning heat pumps as compliant with the applicable energy conservation standards.

  16. Nordyne: Order (2010-CE-01/0210)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Nordyne, LLC d/b/a Garrison Heating and Cooling Products to pay a $10,000 civil penalty after finding Nordyne had failed to certify that certain models of central air conditioners and central air conditioning heat pumps comply with the applicable energy conservation standard.

  17. A Desk Guide To The Davis-Bacon Act | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Desk Guide To The Davis-Bacon Act A Desk Guide To The Davis-Bacon Act PDF icon DOE DBA Desk Guide Rev 1 July 30 2012 More Documents & Publications Davis Bacon Frequently Asked Questions (FAQs) Labor Standards/Wage and Hour Laws Davis-Bacon Act - Under the American Recovery and Reinvestment Act of 2009 (ARRA)

  18. Draft Sample Collection Instrument | Department of Energy

    Office of Environmental Management (EM)

    Draft Sample Collection Instrument Draft Sample Collection Instrument Davis-Bacon Semi-annual Labor Compliance Report OMB Control Number 1910-New PDF icon dba_collection_instrument_mock_up.pdf More Documents & Publications SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT Labor Standards/Wage and Hour Laws

  19. Preclinical evaluation of destruxin B as a novel Wnt signaling target suppressing proliferation and metastasis of colorectal cancer using non-invasive bioluminescence imaging

    SciTech Connect (OSTI)

    Yeh, Chi-Tai; Center of Excellence for Cancer Research, Taipei Medical University, Taipei, Taiwan; Department of Surgery, Taipei Medical University-Shuang Ho Hospital, Taipei, Taiwan ; Rao, Yerra Koteswara; Ye, Min; Wu, Wen-Shi; Chang, Tung-Chen; Wang, Liang-Shun; Division of Thoracic Surgery, Department of Surgery, Shuang Ho Hospital, Taipei Medical University, Taipei, Taiwan ; Wu, Chih-Hsiung; Department of Surgery, Taipei Medical University-Shuang Ho Hospital, Taipei, Taiwan ; Wu, Alexander T.H.; Tzeng, Yew-Min

    2012-05-15

    In continuation to our studies toward the identification of direct anti-cancer targets, here we showed that destruxin B (DB) from Metarhizium anisopliae suppressed the proliferation and induced cell cycle arrest in human colorectal cancer (CRC) HT29, SW480 and HCT116 cells. Additionally, DB induced apoptosis in HT29 cells by decreased expression level of anti-apoptotic proteins Bcl-2 and Bcl-xL while increased pro-apoptotic Bax. On the other hand, DB attenuated Wnt-signaling by downregulation of ?-catenin, Tcf4 and ?-catenin/Tcf4 transcriptional activity, concomitantly with decreased expression of ?-catenin target genes cyclin D1, c-myc and survivin. Furthermore, DB affected the migratory and invasive ability of HT29 cells through suppressed MMPs-2 and -9 enzymatic activities. We also found that DB targeted the MAPK and/or PI3K/Akt pathway by reduced expression of Akt, IKK-?, JNK, NF-?B, c-Jun and c-Fos while increased that of I?B?. Finally, we demonstrated that DB inhibited tumorigenesis in HT29 xenograft mice using non-invasive bioluminescence technique. Consistently, tumor samples from DB-treated mice demonstrated suppressed expression of ?-catenin, cyclin D1, survivin, and endothelial marker CD31 while increased caspase-3 expression. Collectively, our data supports DB as an inhibitor of Wnt/?-catenin/Tcf signaling pathway that may be beneficial in the CRC management. Highlights: ? Destruxin B (DB) inhibited colorectal cancer cells growth and induced apoptosis. ? MAPK and/or PI3K/Akt cascade cooperates in DB induced apoptosis. ? DB affected the migratory and invasive ability of HT29 cells through MMP-9. ? DB attenuated Wnt-signaling components ?-catenin, Tcf4. ? DB attenuated cyclin D1, c-myc, survivin and tumorigenesis in HT29 xenograft mice.

  20. Criteria for calculating the efficiency of HEPA filters during and after design basis accidents

    SciTech Connect (OSTI)

    Bergman, W.; First, M.W.; Anderson, W.L.; Gilbert, H.; Jacox, J.W.

    1994-12-01

    We have reviewed the literature on the performance of high efficiency particulate air (HEPA) filters under normal and abnormal conditions to establish criteria for calculating the efficiency of HEPA filters in a DOE nonreactor nuclear facility during and after a Design Basis Accident (DBA). The literature review included the performance of new filters and parameters that may cause deterioration in the filter performance such as filter age, radiation, corrosive chemicals, seismic and rough handling, high temperature, moisture, particle clogging, high air flow and pressure pulses. The deterioration of the filter efficiency depends on the exposure parameters; in severe exposure conditions the filter will be structurally damaged and have a residual efficiency of 0%. Despite the many studies on HEPA filter performance under adverse conditions, there are large gaps and limitations in the data that introduce significant error in the estimates of HEPA filter efficiencies under DBA conditions. Because of this limitation, conservative values of filter efficiency were chosen when there was insufficient data.

  1. Validation of a plant dynamics code for 4S - Test analysis of natural circulation behavior

    SciTech Connect (OSTI)

    Sebe, F.; Horie, H.; Matsumiya, H.; Fanning, T. H.

    2012-07-01

    A plant transient dynamics code for a sodium-cooled fast reactor was developed by Toshiba. The code is used to evaluate the safety performance of Super-Safe, Small, and Simple reactor (4S) for Anticipated Operational Occurrences (AOOs), Design Basis Accident (DBA) and Beyond DBA (BDBA). The code is currently undergoing verification and validation (V and V). As one of the validation, test analysis of the Shutdown Heat Removal Test (SHRT)-17 performed in the Experimental Breeder Reactor (EBR)-II was conducted. The SHRT-17 is protected loss of flow test. The purpose of this validation is to confirm capability of the code to simulate natural circulation behavior of the plant. As a result, good agreements are shown between the analytical results and the measured data which were available from instrumented subassembly. The detailed validation result of the natural circulation behavior is described in this paper. (authors)

  2. Microsoft Word - Smart Grid Workshop Report Final Draft 07 21...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of condition- based maintenance Db level of 5th (or 7th) order harmonics Methods of ... of MW participating in RTP andor DSM programs of automated grid operations ...

  3. Blue Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    (DB2) was drilled and completed in 2004.9 Information from these two wells showed that geothermal energy could be commercially produced at Blue Mountain. Geothermal production...

  4. PYLOTDB

    Energy Science and Technology Software Center (OSTI)

    002728IBMPC02 PylotDB - A Database Management, Graphing, and Analysis Tool Written in Python http://pmatwiki.sandia.gov/pmatwiki/how-to-use-pylot

  5. Metalysis | Open Energy Information

    Open Energy Info (EERE)

    Metalysis Jump to: navigation, search Name: Metalysis Place: South Yorkshire, United Kingdom Zip: S63 5DB Sector: Efficiency Product: UK-based company offering 50% energy...

  6. ESPC ENABLE Webinar for ESCOs

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facility Management Services. SIN 246-51 - Installation Requiring Construction (DB) SIN 246-1000 - Ancillary Supplies andor Services What Special Item Numbers (SINS)...

  7. Democratic Republic of Congo-Forest Investment Program (FIP)...

    Open Energy Info (EERE)

    World Bank, African Development Bank (AfDB) Partner Ministry of Environment, Nature Conservation and Tourism Sector Land Focus Area Biomass, Forestry, Greenhouse Gas,...

  8. DC Resistivity Survey (Schlumberger Array) At Coso Geothermal...

    Open Energy Info (EERE)

    Furgerson (1973) were plotted and automatically processed and interpreted References Jackson, D.B. ODonnell, J.E.; Gregory, D. I. (1 January 1977) Schlumberger soundings,...

  9. EAGA Partnership | Open Energy Information

    Open Energy Info (EERE)

    Kingdom Zip: NE2 1DB Sector: Efficiency Product: Employee-owned trust installing insulation, cavity wall and loft insulation, and allocating and administering energy efficiency...

  10. Categorical Exclusion Determination liornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OAI4 - Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 Training exercises and...

  11. Categorical ExclusIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OAI4 Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  12. Categorical Exclusion Determination Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 Training exercises and...

  13. CategorIcal ExcluSIon Determination 1,'orn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  14. Categ orical ExcluSIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements DAIS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  15. Categorical ExclusIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14. Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facilitv Operations DB 1.2 Training exercises and...

  16. Categorical ExclusIon DeterminatIon Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  17. Categorical ExclusIon DetermInation 11'ornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA 15 - Intemational umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  18. Categorical Exclusion Determination Fornl .......,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  19. Categorical ExclusIon DetermInation Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OAI4. Approval oftechnical exchange arrangements OA 15 . International umbrella agreements for energy R&D Facility Operations DB 1.2 Training exercises and...

  20. Categorical Exclusion 4567, MPLE Test Stand Replacement Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines DA 14 - Approval of technical exchange arrangements DA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  1. Categoneal Exclusion DeterminatlonFornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OAI4 - Approval of technical exchange arrangements DAIS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  2. Categorical ExclusionUetermlnatton Fonn

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines DAI4. Approval oftechnieal exchange arrangements DA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  3. CategorIcal ExcluSIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA I 4 - Approval of technical exchange arrangements DAIS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  4. Categorical Exclusion DetermInation Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OAI5 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  5. Categorical ExcluSlonDetermnlatIon Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA IS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  6. Categorical ExclusIon DetermInation Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA IS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  7. Categorical ExclusIon Determination 1";'orn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines DAI4 - Approval oftechnical exchange arrangements DAIS - International umbrella agreements for energy R&D Eerations DB 1.2 - Training exercises and simulation...

  8. Categorical Exclusion 4566, Ash Removal Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OAI4 - Approval oftechnical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 Training exercises and...

  9. Project Title: Guard Tower and Station D&D Project (4548)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OAI4 - Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  10. Supplier Information Form Date: New Revision

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supplier Information Form Date: New Revision Interested suppliers may complete and submit a Supplier Information Form to be included into LANS' vendor database. Suppliers are advised that there is no guarantee any solicitations or awards will be sent to Supplier by submitting a Supplier Information Form; however, in the event a solicitation is sent to the Supplier from an LANS Procurement Official, then a more formal quotation/offer may be required. Legal Business Name: D/B/A: (if applicable)

  11. Sandia National Laboratories: Working with Sandia: Procurement: IT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transformation Services IT Transformation Services Opportunities Potential Suppliers Current Suppliers Accounts Payable Contract Audit Contractor/Bidder Information Construction and Facilities iSupplier Account IT Transformation Services Staff Augmentation What Does Sandia Buy? Working with Sandia IT Transformation Services The following companies provide Enterprise IT Services to Sandia facilities in Albuquerque and Carlsbad, NM, and Livermore California. Mutual Telecom Services Inc. dba

  12. Electronic Funds Transfer Authorization Form 4/2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vendor Information Company Name or DBA: Address: City/State/Zip: Internal Use Only Electronic Funds Transfer Authorization Form I, an authorized signer on the below account, hereby authorize Los Alamos National Laboratory, hereinafter called the Laboratory, to originate Automated Clearinghouse (ACH) credits for invoice payments (vendors), travel reimbursements, small purchase reimbursements and royalty payments (employees). I further authorize the Laboratory to originate ACH debits to this

  13. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK | Department of Energy DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK Guidance on using appropriate prevailing wage rates for all Davis-Bacon Act (DBA) covered-work, including weatherization work, performed under the State Energy (SEP) Program using

  14. Davis-Bacon Act Wage Rates for ARRA-Funded Energy Efficiency and Conservation Block Grants Program Projects Involving Residential Weatherization Work

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANTS PROGRAM NOTICE 10-012 EFFECTIVE DATE: May 6, 2010 SUBJECT: DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANTS PROGRAM PROJECTS INVOLVING RESIDENTIAL WEATHERIZATION WORK PURPOSE: To provide guidance on using appropriate prevailing wage rates for Davis-Bacon Act (DBA) covered weatherization work performed under the Energy Efficiency and Conservation Block Grant (EECBG) Program using American Recovery and

  15. Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Involving Residential Weatherization Work | Department of Energy Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program Projects Involving Residential Weatherization Work Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program Projects Involving Residential Weatherization Work Guidance on using appropriate prevailing wage rates for Davis-Bacon Act (DBA) covered weatherization work performed under the State Energy Program (SEP) using American Recovery and Reinvestment Act of

  16. STATE ENERGY PROGRAM NOTICE (10-004A), ENERGY EFFICIENCY CONSERVATION BLOCK GRANT PROGRAM NOTICE (10-005A), AND APPLIANCE REBATE PROGRAM NOTICE (10-001A)

    Energy Savers [EERE]

    REVISION: THIS GUIDANCE HAS BEEN AMENDED FROM THE JANUARY 11, 2010. THE CHANGE IN THIS AMENDED GUIDANCE IS RELATED TO SEP AND EECBG FINANCING PROGRAMS FOR INDIVIDUAL HOMEOWNERS. STATE ENERGY PROGRAM NOTICE (10-004A), ENERGY EFFICIENCY CONSERVATION BLOCK GRANT PROGRAM NOTICE (10-005A), AND APPLIANCE REBATE PROGRAM NOTICE (10-001A) EFFECTIVE DATE: April 7, 2010 SUBJECT: GUIDANCE ON DAVIS BACON ACT (DBA) REQUIREMENTS FOR AMERICAN REINVESTMENT AND RECOVERY ACT OF 2009 (ARRA)- FUNDED REBATE, GRANT

  17. Everest Refrigeration: Noncompliance Determination (2015-SE-42001) |

    Office of Environmental Management (EM)

    Department of Energy Noncompliance Determination (2015-SE-42001) Everest Refrigeration: Noncompliance Determination (2015-SE-42001) April 24, 2015 DOE issued a Notice of Noncompliance Determination to Bu Sung America Corporation (dba Everest Refrigeration) finding that commercial refrigeration equipment model number ESGR3 does not comport with the energy conservation standards. DOE determined the product was noncompliant based on DOE testing. Bu Sung must immediately notify each person (or

  18. Everest Refrigeration: Order (2015-SE-42001) | Department of Energy

    Office of Environmental Management (EM)

    Order (2015-SE-42001) Everest Refrigeration: Order (2015-SE-42001) June 9, 2015 DOE ordered Bu Sung America Corporation (dba Everest Refrigeration) to pay a $12,080 civil penalty after finding Bu Sung had manufactured and distributed in commerce in the U.S. at least 64 units of noncompliant commercial refrigerator basic model ESGR3. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Bu Sung. PDF icon Everest Refrigeration: Order (2015-SE-42001) More

  19. Everest Refrigeration: Proposed Penalty (2015-SE-42001) | Department of

    Office of Environmental Management (EM)

    Energy Proposed Penalty (2015-SE-42001) Everest Refrigeration: Proposed Penalty (2015-SE-42001) June 3, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Bu Sung America Corporation (dba Everest Refrigeration) manufactured and distributed noncompliant commercial refrigeration equipment model ESGR3 in the U.S. Federal law subjects manufacturers and private labelers to civil penalties if those parties distribute in the U.S. products that do not meet applicable energy conservation

  20. DOE-STD-1104 Acronyms

    Office of Environmental Management (EM)

    04 Master Acronyms List AU C.F.R. Code of Federal Regulations CSDR Conceptual Safety Design Report DBA Design Basis Accident DNFSB Defense Nuclear Facilities Safety Board DOE Department of Energy DOE-STD DOE Standard DSA Documented Safety Analysis EG Evaluation Guideline ESS Evaluation of the Safety of the Situation HC Hazard Category (e.g., HC-1, HC-2, HC-3) IP Implementation Plan JCO Justification for Continue Operations LCO Limiting Condition for Operation LCS Limiting Control Setting NSTP

  1. Reduction of Beam Emittance of Pep-X Using Quadruple Bend Achromat Cell

    SciTech Connect (OSTI)

    Wang, Min-Huey; Cai, Yunhai; Hettel, Robert; Nosochkov, Yuri; /SLAC

    2009-05-26

    SLAC National Accelerator Laboratory is studying an option of building a high brightness synchrotron light source machine, PEP-X, in the existing PEP-II tunnel [1, 2]. By replacing 6 arcs of FODO cells of PEPII High Energy Ring (HER) with two arcs of DBA and four arcs of TME and installation of 89.3 m long damping wiggler an ultra low beam emittance of 0.14 nm-rad (including intra-beam scattering) at 4.5 GeV is achieved. In this paper we study the possibility to further reduce the beam emittance by releasing the constraint of the dispersion free in the DBA straight. The QBA (Quadruple Bend Achromat) cell is used to replace the DBA. The ratio of outer and inner bending angle is optimized. The dispersion function in the non-dispersion straight is controlled to compromise with lower emittance and beam size at the dispersion straight. An undulator of period length 23 mm, maximum magnetic field of 1.053 T, and total periods of 150 is used to put in the 30 straights to simulate the effects of these IDs on the beam emittance and energy spread. The brightness including all the ID effects is calculated and compared to the original PEP-X design.

  2. HFBR: Review of the technical specifications against the FSAR

    SciTech Connect (OSTI)

    Rao, D.V.; Ross, S.B.; Claiborne, E.R.; Darby, J.L.; Clark, R.A.

    1990-01-25

    The purpose of this review is to determine the adequacy of the High Flux Beam Reactor (HFBR) Technical Specifications for 40 MW operation by comparison with the HFBR Final Safety Analysis Report, particularly the accident analyses chapter. Specifically, the Technical Specifications were compared against the Design Basis Accident (DBA) Analyses presented in the Addendum to the HFBR FSAR for 60 MW Operation. The 60 MW DBA analyses was used since it is more current and complete than the analyses presented in the original FSAR which is considered obsolete. A listing of the required systems and equipment was made for each of the accidents analyzed. Additionally, the Technical Specification instrument setpoints were compared to the DBA analyses parametric values. Also included in this review was a comparison of the Technical Specification Bases against the FSAR and the identification of any differences. The HFBR Operations Procedures Manual (OPM) was also reviewed for any inconsistencies between the FSAR or the Technical Specifications. Upon completion of this review it was determined that the Technical Specifications are well written and the items commented on should not delay the low power restart (40 MW). Additionally, the OPM is also well written and does not require further modification before restart.

  3. Increase of the grating coupler bandwidth with a graphene overlay

    SciTech Connect (OSTI)

    Cheng, Zhenzhou; Li, Zhen; Xu, Ke; Tsang, Hon Ki

    2014-03-17

    We present theoretical and experimental results that demonstrate an increase in the grating bandwidth by placing a graphene on the chip. A focusing subwavelength grating with coupling efficiency of ?4.3?dB and 1?dB bandwidth of ?60?nm was demonstrated. After a graphene sheet was transferred onto the chip, the maximum 1?dB bandwidth was increased to ?72?nm. Experimental results are consistent with the calculated graphene induced waveguide refractive index and dispersion changes, and the bandwidth improvement may be attributed to the reduction of grating dispersion. This study may be of interest for graphene-on-silicon photonic integrated circuit applications.

  4. Programs for Assembling SBH Experiments

    Energy Science and Technology Software Center (OSTI)

    1995-11-28

    DB EXP ASSEMBLY is a suite of programs that enable selection of bundles of data, which are referred to as experiments, from the DB SBH archival database. In other words, an experiment is a bundle of data which is analyzed as a unit. Program DBJ creates raw experiments based on initial specification. Program DBK then tests the experiments for a number of consistemcy and completeness criteria, reports bugs in the experiment and recommends solutions, andmore » performs the desired corrections. An experiment that has passed the final DBK test is ready for analysis by the DB DISCOVERY programs.« less

  5. The MicroBooNE Experiment - Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MicroBooNE Documents and Publications Public Notes See the Public Notes Page for a list of notes with results made public by the MicroBooNE collaboration. Presentations See the Talks Page for copies of slides and posters presented at conferences and workshops. MicroBooNE DocDB Like most experiments at Fermilab, MicroBooNE uses DocDB - a documents database. Much of the contents of the DocDB are restricted to members of the collaboration, but some items are public. Use the link below to enter the

  6. American Recovery & Reinvestment Act of 2009 (Recovery Act or ARRA) Davis-Bacon Act Requirements

    Energy Savers [EERE]

    NNSA Albuquerque Service Center Labor Standards Training March 9, 2015 Eva M. Auman eva.auman@hq.doe.gov 1 Labor Standards Statutes  The Davis-Bacon Act (DBA)  Davis-Bacon and Related Acts (DBRA)  Contract Work Hours and Safety Standards Act (CWHSSA)  Copeland "Anti-Kickback" Act (CA)  Walsh-Healey Public Contracts Act (PCA)  McNamara-O'Hara Service Contract Act(SCA)  Miller Act (MA)  Fair Labor Standards Act (FLSA) 2 Labor Standards - Presidential Executive

  7. Flash® Processed Steel for Automotive Applications

    Broader source: Energy.gov (indexed) [DOE]

    Gary M Cola, Jr SFP Works, LLC (dba Flash® Bainite) U.S. DOE Advanced Manufacturing Office Program Review Meeting Washington, D.C. May 28-29, 2015 This presentation does not contain any proprietary, confidential, or otherwise restricted information. Project Objective  Create a process for making Advanced High Strength Steel (AHSS) that  Uses plain carbon (AISI 1020) steel as a feedstock  Has a tensile strength of 1500 MPa or higher  Has the necessary formability to be cold stampable

  8. Compartment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19 Vegetation o SRFS NRCS II -SCDNR AI 'iS~A,~' .,/~ III .."...,7 I!IJ ~- 600 Meters N A Community D Mixed Pine Fields * Loblolly Pine D Longleaf Pine D Sand Pine D Mixed Pine/Hardwood D Upland Hardwood D Forb/Grassland _ Other - Disturbed Area o Monitoring wells * Wastesites ;;v: Utility ROW NRoads . Fitness/Education Trails Ed SRS bays D Buildings D Hydric Soils * 400 Bay 184 200 o Compartment 17 C\J ""0 cu o cc o 200 Soils Soil Series and Phase DBaB DDoA DDoB DFuA DFuB .Ur sc

  9. N A

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    _ Loblolly Pine _ Longleaf Pine D Mixed Pine/Hardwood D Carolina Bay Wetland _Water D Sandhill Scrub oakiPine N Site Boundary IV. Streams ';f({; Roads .* TES Plants (1) D TES Plants (2) D SRS Bays a Hydric Soils 430 Soils Soil Series and Phase DAnB DBaB DLaB 13]Og c:J Rm Vegetation Compartment 29 ooo~ooZZZgggggg~ggggg 0000000000000000000000 0000000000000000000000 o 0 CIQ'~""\~ ~O!.> 'p.:**~~ <DX-ri'.v 0 :0 0O"'()~:)<:0 6000'6 ~',-~'D 6.y6~ 0 00000000000000000000001

  10. SEMI-ANNUAL REPORT - G2 LNG LLC - FE DKT. NO. 15-44-LNG - ORDER 3682 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy REPORT - G2 LNG LLC - FE DKT. NO. 15-44-LNG - ORDER 3682 SEMI-ANNUAL REPORT - G2 LNG LLC - FE DKT. NO. 15-44-LNG - ORDER 3682 PDF icon October 2015 More Documents & Publications SEMI-ANNUAL REPORTS FOR - BEAR HEAD LNG CORPORATION AND BEAR HEAD (USA) LLC - FE DKT. NO. 15-33-LNG - ORDER 3681 SEMI-ANNUAL REPORT FOR SCT&E LNG LLC - FE DKT. NO. 14-89-LNG - ORDER NO. 3566 SEMI-ANNUAL REPORTS FOR LNG DEVELOPMENT COMPANY, LLC (D/B/A Oregon LNG) - FE DKT. NO. 12-48-LNG -

  11. SEMI-ANNUAL REPORTS FOR TEXAS LNG - TEXAS LNG - FTA - FE DKT. NO.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    13-160-LNG - 3443 | Department of Energy TEXAS LNG - TEXAS LNG - FTA - FE DKT. NO. 13-160-LNG - 3443 SEMI-ANNUAL REPORTS FOR TEXAS LNG - TEXAS LNG - FTA - FE DKT. NO. 13-160-LNG - 3443 PDF icon October 2014 PDF icon April 2015 More Documents & Publications SEMI-ANNUAL REPORTS - TEXAS LNG BROWNSVILLE LLC - FE DKT. 15-62-LNG - Order 3716 FTA SEMI-ANNUAL REPORTS FOR - STROM, INC. - FE DKT. NO. 14-56-LNG - ORDER NO 3537 SEMI-ANNUAL REPORTS FOR WALLER LNG SERVICES, LLC D/B/A WALLER POINT LNG

  12. Hearing protection for miners

    SciTech Connect (OSTI)

    Schulz, T.

    2008-10-15

    A NIOSH analysis showed that at age 50 approximately 90% of coal miners have a hearing impairment, yet noise included hearing loss is 100% preventable. The article discusses requirements of the MSHA regulations, 30 CFR Part 62 - occupational noise exposure (2000) and a 2008-MSHA document describing technologically achievable and promising controls for several types of mining machinery. Hearing protection is still required for exposure to greater than 90 dBA. These are now commercially available ways to determine how much attenuation an individual gets from a given hearing protector, known as 'fit testing'. 3 refs., 1 fig., 1 tab., 1 photo.

  13. UNITED STATES OF AMERICA DEPARTMENT OF ENERGY

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DEPARTMENT OF ENERGY OFFICE OF fOSS IL ENERGY ) Freeport LNG Expansion, L.P. and FLNG Liquefaction, LLC ) Lake Charles Exports, LLC ) Dominion Cove Point LNG, LP ) Carib Energy (USA) LLC ) Freeport LNG Expansion, L.P. and FLNG Liquefaction, LLC ) Cameron LNG, LLC ) Gulf Coast LNG Export, LLC ) Jordan Cove Energy Project, L.P ) LNG Development Company, LLC (d/b/a Oregon LNG) ) Cheniere Marketing, LLC ) Southern LNG Company, L.L.C. ) Gulf LNG Liquefaction Company, LLC ) CE FLNG, LLC ) Excelerate

  14. STATE ENERGY PROGRAM NOTICE 10-003A | Department of Energy

    Energy Savers [EERE]

    STATE ENERGY PROGRAM NOTICE 10-003A STATE ENERGY PROGRAM NOTICE 10-003A GUIDANCE ON IMPLEMENTATION OF THE DAVIS-BACON ACT PREVAILING WAGE REQUIREMENTS FOR STATE ENERGY PROGRAM GRANT RECIPIENTS UNDER THE AMERICAN RECOVERY AND REINVESTMENT ACT OF 2009. REVISED APRIL 7, 2010. PDF icon sep_dba_program_notice_10-003A.pdf More Documents & Publications WPN 09-9: Guidance on Implementation of the Davis-Bacon Act Prevailing Wage Requirements in the American Recovery and Reinvestment Act of 2009

  15. Sunshine Lighting: Proposed Penalty (2014-SE-54008) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proposed Penalty (2014-SE-54008) Sunshine Lighting: Proposed Penalty (2014-SE-54008) March 12, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Lighting & Supplies, Inc. d/b/a Sunshine Lighting Company ("Sunshine") manufactured and distributed Sunlite-branded, noncompliant metal halide lamp fixture basic models 04937-SU and 04952-SU in the U.S. Federal law subjects manufacturers and private labelers to civil penalties if those parties distribute in the U.S. products that

  16. DOE - Office of Legacy Management -- Oxford OH Site - OH 22

    Office of Legacy Management (LM)

    Oxford OH Site - OH 22 FUSRAP Considered Sites Oxford, OH Alternate Name(s): Alba Craft Shop Alba Craft Laboratory Albaugh dba Alba Craft Shop OH.22-3 OH.22-4 Location: 10-14 West Rose Avenue, Oxford, Ohio OH.22-7 Historical Operations: Performed metal fabrication under subcontract with AEC prime contract to National Lead Company of Ohio on uranium metal. Includes VPs. OH.22-5 OH.22-6 OH.22-8 Eligibility Determination: Eligible OH.22-1 OH.22-2 Radiological Survey(s): Assessment Survey,

  17. Davis-Bacon Act - Under the American Recovery and Reinvestment Act of 2009

    Office of Environmental Management (EM)

    (ARRA) | Department of Energy Davis-Bacon Act - Under the American Recovery and Reinvestment Act of 2009 (ARRA) Davis-Bacon Act - Under the American Recovery and Reinvestment Act of 2009 (ARRA) Davis-Bacon Act presentation by Jay Nathwani at the 2012 Peer Review Meeting PDF icon gtp_2012peerreview_dba_nathwani.pdf More Documents & Publications DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE

  18. Genome Data from DOOR: a Database for prOkaryotic OpeRons

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    DOOR provides an Organism View for browsing, a gene search tool, an operon search tool, and the operon prediction interface.[Text taken and edited from http://csbl1.bmb.uga.edu/OperonDB/tutorial.php

  19. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Local structures of copper-doped ZnO films Ma, Q. ; Buchholz, D.B. ; Chang, R.P.H. February 2015 Molecular design for growth of supramolecular membranes with hierarchical structure ...

  20. Appendix TFIELD Attachment A: Attachment A: TFIELD-2014 Visualization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    input and output data is summarized in Appendix TFIELD-2014 and discussed in detail in Hart et al. (2009). Hart, D.B., Beauheim, R.L. and McKenna, S.A. 2009. Analysis Report for...

  1. Property:FirstWellName | Open Energy Information

    Open Energy Info (EERE)

    (DB1) + C Chena Geothermal Area + Well 7 + F Fenton Hill HDR Geothermal Area + GT-1 + K Kilauea East Rift Geothermal Area + HGP-A + L Lightning Dock Geothermal Area + TFD 55-7...

  2. Ultra-compact optical true time delay device for wideband phased...

    Office of Scientific and Technical Information (OSTI)

    The input is a fiber-and-microlens array, whose output spots are re-imaged multiple times ... The fiber-to-detector insertion loss is 7.82 dB for the shortest delay path. Authors: ...

  3. Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Evaluation and Test Suite coNCePTuaL -- A Network Correctness and Performance Testing Language db, Version 0.2.x FEHM (Finite Element Heat and Mass Transfer Code) Genome...

  4. Geological and geophysical studies of a geothermal area in the...

    Open Energy Info (EERE)

    geology; structure; surveys; tectonics; United States; volcanic rocks Authors Williams, P.L.; Mabey, D.R.; Pierce, K.L.; Zohdy, A.A.R.; Ackermann, H.; Hoover and D.B. Published U....

  5. Intelligent Energy Holdings | Open Energy Information

    Open Energy Info (EERE)

    Kingdom Zip: W1K 5DB Product: Intelligent Energy provides energy solutions based on PEM fuel cells for the distributed power and transport industries. It purchased micro scale...

  6. Oxis Energy Ltd | Open Energy Information

    Open Energy Info (EERE)

    Zip: OX14 3DB Product: Oxfordshire-based Oxis Energy is developing a rechargeable lithium-sulphur battery with more capacity than lithium ion, it claims. References: Oxis...

  7. CoverSheet

    Office of Scientific and Technical Information (OSTI)

    Zhang, Honglin Hungerford, Aimee L. Fryer, Christopher L. Hughes, John P. Smith, Randall K. Badenes, Carles Intended for: AtomDB Work Week and Workshop, 2012-08-062012-08-10...

  8. Space-Age Ceramics Get Their Toughest Test

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Univ. of California, Berkeley); A. Haboub, A.A. MacDowell, J.R. Nasiatka, and D.Y. Parkinson (ALS); B.N. Cox and D.B. Marshall (Teledyne Scientific Company); and R.O. Ritchie...

  9. Progress in Understanding Iron Peak Elements in Young Supernova...

    Office of Scientific and Technical Information (OSTI)

    Relation: Conference: AtomDB Work Week and Workshop 2013 ; 2013-08-19 - 2013-08-23 ; Cambridge, Massachusetts, United States Research Org: Los Alamos National Laboratory (LANL)...

  10. X:\\ARM_19~1\\P283-315.WPD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    increments. Results indicate angular offsets of and in the pointing directions of the two antennas. A mean difference between the UMass and Penn State calibrations of 0.98 dB was...

  11. Nexeon | Open Energy Information

    Open Energy Info (EERE)

    Zip: OX14 3DB Product: UK-based company developing advanced Li-ion rechargeable battery technology. Coordinates: 51.813938, -1.2937 Show Map Loading map......

  12. CX-009590: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    723-A Distribution Panel 4 (DB4) Replacement CX(s) Applied: B1.3 Date: 12/19/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office

  13. Ocean Navitas | Open Energy Information

    Open Energy Info (EERE)

    Condry. Website: www.oceannavitas.com References: Ocean Navitas&127;UNIQ75db538f85b32404-ref-000014E2-QINU&127; This article is a stub. You can help OpenEI by expanding it. Ocean...

  14. Some stuff about the document data-base

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is what you choose to change or add anything to DocDB - a document or an Event, or meta-information describing these. More details further below. The rest of the Home Page...

  15. New York's 8th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  16. New York's 10th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  17. New York's 11th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  18. New York's 14th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  19. New York's 16th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  20. New York's 17th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  1. New York's 15th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  2. New York's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  3. New York's 9th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  4. New York's 13th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Venture Partners Cora Capital Advisors LLC DB Climate Change Advisors DBCCA E Cane Fuel Corporation EKO Asset Management Partners EarthRise Capital Eco Capital LLC EcoSense...

  5. Schlumberger soundings, audio-magnetotelluric soundings and telluric...

    Open Energy Info (EERE)

    and interpreted data are shown in the graphs given in appendixes I and II. Authors Jackson, D.B. ODonnell, J.E.; Gregory and D. I. Published DOE Information Bridge, 111977...

  6. Direct-Current Resistivity Survey At Coso Geothermal Area (1977...

    Open Energy Info (EERE)

    a heat flow anomaly where all values are greater than 10 heat flow units. References Jackson, D.B. ODonnell, J.E.; Gregory, D. I. (1 January 1977) Schlumberger soundings,...

  7. Exploring the Raft River geothermal area, Idaho, with the dc...

    Open Energy Info (EERE)

    PACIFIC NORTHWEST REGION; PHYSICAL PROPERTIES; USA; WELLS Authors Zohdy, A.A.R.; Jackson, D.B.; Bisdorf and R.J. Published Journal Geophysics, 10121975 DOI Not Provided...

  8. Reconnaissance electrical surveys in the Coso Range, California...

    Open Energy Info (EERE)

    of a heat flow anomaly where all values are greater than 10 heat flow units. Authors Jackson, D.B.; O'Donnell and J.E. Published Journal Journal of Geophysical Research, 510...

  9. Telluric Survey At Coso Geothermal Area (1977) | Open Energy...

    Open Energy Info (EERE)

    trend runs through the Coso Hot Springs--Devil's Kitchen geothermal area. References Jackson, D.B. ODonnell, J.E.; Gregory, D. I. (1 January 1977) Schlumberger soundings,...

  10. Audio-Magnetotellurics At Coso Geothermal Area (1977) | Open...

    Open Energy Info (EERE)

    a heat flow anomaly where all values are greater than 10 heat flow units. References Jackson, D.B. ODonnell, J.E.; Gregory, D. I. (1 January 1977) Schlumberger soundings,...

  11. Direct-Current Resistivity Survey At Raft River Geothermal Area...

    Open Energy Info (EERE)

    surveys were undertaken at the Raft River geothermal area. References Zohdy, A.A.R.; Jackson, D.B.; Bisdorf, R.J. (12 October 1975) Exploring the Raft River geothermal area,...

  12. ESTSC - Find the latest in U.S. Department of Energy Software

    Office of Scientific and Technical Information (OSTI)

    OF HWEM OPTIMIZE OPTIMIZE-M Opyndx ORAMUS(WINDOWS) ORCON1 ORION96* ORMAC ORNL FISH ORNL RAIL & BARGE DB ORNL SunTracker OSC 12.9.1.P OSCARS OSHMPI OSS OSSPERIXMLv1 OTP...

  13. ARM TR-008

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is used as input to the system to establish a dynamic range of at least 55 dB. * System Sensitivity: Signal generator is used to establish a minimum detectable level of at...

  14. Sample data for greenbutton custodian project | OpenEI Community

    Open Energy Info (EERE)

    to populate sample customer accounts only. I would like to populate the DB with energy data like meter reading etc. Can someone share pointers on how I can get the custodian...

  15. ARM - Publications: Science Team Meeting Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Variability of Low Stratus Over the ARM SGP CART Based on Cloud Radar Data and LES Simulations Kogan, Z.N., Mechem, D.B., and Kogan, Y.L., Cooperative Institute for Mesoscale...

  16. X:\\ARM_19~1\\P273-281.WPD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    dBZe 33 dbZe 95 Session Papers 279 Figure 1. (a) Dual-wavelength ratio (DWR) models for gamma distributions of spheroid (adapted from Matrosov 1995) and (b) Mean velocity at 400...

  17. --No Title--

    U.S. Energy Information Administration (EIA) Indexed Site

    21- 21 XXSUPL. C3DA Electricity used for water heating ELWATR4 23- 23 XXSUPL. C3EA ... 33- 33 XXSUPL. C3DB Natural gas used for water heating NGWATR4 35- 35 XXSUPL. C3EB ...

  18. V-105: Google Chrome Multiple Vulnerabilities | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    navigation handling. 3) An error in Web Audio can be exploited to cause memory corruption. 4) A use-after-free error exists in SVG animations. 5) An error in Indexed DB can...

  19. November 8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 November 8 Attending: Eric Iwona JeffP JeffA Mike Craig Utilization: Cluster is full as usual recently with over 1800 cores in service. Outages: Nothing major. Icecube db...

  20. Categorical ExclusIon DetermInatlonFornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines oAI4 - Approval oftechnical exchange arrangements oA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  1. CategorIcal Excluslon Determination Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations , DB 1.2 - Training exercises and simulation gB 1.3 -...

  2. ZEN Eaga Solar Ltd | Open Energy Information

    Open Energy Info (EERE)

    upon Tyne, United Kingdom Zip: NE2 1DB Sector: Solar Product: Distributes solar thermal water heating and PV products. References: ZEN Eaga Solar Ltd1 This article is a stub....

  3. BPA-2014-01346-FOIA Correspondence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy Bonneville Power Administration P.O. Box 3621 Portland, Oregon 97208-3621 FREEDOM OF INFORMATION ACTIPRN ACY PROGRAM In reply refer to: D-B 1 Friends ofthe Columbia...

  4. Deep Burn Fuel Cycle Integration: Evaluation of Two-Tier Scenarios

    SciTech Connect (OSTI)

    S. Bays; H. Zhang; M. Pope

    2009-05-01

    The use of a deep burn strategy using VHTRs (or DB-MHR), as a means of burning transuranics produced by LWRs, was compared to performing this task with LWR MOX. The spent DB-MHR fuel was recycled for ultimate final recycle in fast reactors (ARRs). This report summarizes the preliminary findings of the support ratio (in terms of MWth installed) between LWRs, DB-MHRs and ARRs in an equilibrium two-tier fuel cycle scenario. Values from literature were used to represent the LWR and DB-MHR isotopic compositions. A reactor physics simulation of the ARR was analyzed to determine the effect that the DB-MHR spent fuel cooling time on the ARR transuranic consumption rate. These results suggest that the cooling time has some but not a significant impact on the ARRs conversion ratio and transuranic consumption rate. This is attributed to fissile worth being derived from non-fissile or threshold-fissioning isotopes in the ARRs fast spectrum. The fraction of installed thermal capacity of each reactor in the DB-MHR 2-tier fuel cycle was compared with that of an equivalent MOX 2-tier fuel cycle, assuming fuel supply and demand are in equilibrium. The use of DB-MHRs in the 1st-tier allows for a 10% increase in the fraction of fleet installed capacity of UO2-fueled LWRs compared to using a MOX 1st-tier. Also, it was found that because the DB-MHR derives more power per unit mass of transuranics charged to the fresh fuel, the front-end reprocessing demand is less than MOX. Therefore, more fleet installed capacity of DB-MHR would be required to support a given fleet of UO2 LWRs than would be required of MOX plants. However, the transuranic deep burn achieved by DB-MHRs reduces the number of fast reactors in the 2nd-tier to support the DB-MHRs back-end transuranic output than if MOX plants were used. Further analysis of the relative costs of these various types of reactors is required before a comparative study of these options could be considered complete.

  5. Criteria for calculating the efficiency of deep-pleated HEPA filters with aluminum separators during and after design basis accidents

    SciTech Connect (OSTI)

    Bergman, W.; First, M.W.; Anderson, W.L.; Gilbert, H.; Jacox, J.W.

    1995-02-01

    The authors have reviewed the literature on the performance of high efficiency particulate air (HEPA) filters under normal and abnormal conditions to establish criteria for calculating the efficiency of HEPA filters in a DOE nonreactor nuclear facility during and after a Design Basis Accident (DBA). This study is only applicable to the standard deep-pleated HEPA filter with aluminum separators as specified in ASME N509. The literature review included the performance of new filters and parameters that may cause deterioration in the filter performance such as filter age, radiation, corrosive chemicals, seismic and rough handling, high temperature, moisture, particle clogging, high air flow and pressure pulses. The deterioration of the filter efficiency depends on the exposure parameters; in severe exposure conditions the filter will be structurally damaged and have a residual efficiency of 0%. Despite the many studies on HEPA filter performance under adverse conditions, there are large gaps and limitations in the data that introduce significant error in the estimates of HEPA filter efficiencies under DBA conditions. Because of this limitation, conservative values of filter efficiency were chosen when there was insufficient data.

  6. Application of the MELCOR code to design basis PWR large dry containment analysis.

    SciTech Connect (OSTI)

    Phillips, Jesse; Notafrancesco, Allen (USNRC, Office of Nuclear Regulatory Research, Rockville, MD); Tills, Jack Lee (Jack Tills & Associates, Inc., Sandia Park, NM)

    2009-05-01

    The MELCOR computer code has been developed by Sandia National Laboratories under USNRC sponsorship to provide capability for independently auditing analyses submitted by reactor manufactures and utilities. MELCOR is a fully integrated code (encompassing the reactor coolant system and the containment building) that models the progression of postulated accidents in light water reactor power plants. To assess the adequacy of containment thermal-hydraulic modeling incorporated in the MELCOR code for application to PWR large dry containments, several selected demonstration designs were analyzed. This report documents MELCOR code demonstration calculations performed for postulated design basis accident (DBA) analysis (LOCA and MSLB) inside containment, which are compared to other code results. The key processes when analyzing the containment loads inside PWR large dry containments are (1) expansion and transport of high mass/energy releases, (2) heat and mass transfer to structural passive heat sinks, and (3) containment pressure reduction due to engineered safety features. A code-to-code benchmarking for DBA events showed that MELCOR predictions of maximum containment loads were equivalent to similar predictions using a qualified containment code known as CONTAIN. This equivalency was found to apply for both single- and multi-cell containment models.

  7. Development of computer program ENMASK for prediction of residual environmental masking-noise spectra, from any three independent environmental parameters

    SciTech Connect (OSTI)

    Chang, Y.-S.; Liebich, R. E.; Chun, K. C.

    2000-03-31

    Residual environmental sound can mask intrusive4 (unwanted) sound. It is a factor that can affect noise impacts and must be considered both in noise-impact studies and in noise-mitigation designs. Models for quantitative prediction of sensation level (audibility) and psychological effects of intrusive noise require an input with 1/3 octave-band spectral resolution of environmental masking noise. However, the majority of published residual environmental masking-noise data are given with either octave-band frequency resolution or only single A-weighted decibel values. A model has been developed that enables estimation of 1/3 octave-band residual environmental masking-noise spectra and relates certain environmental parameters to A-weighted sound level. This model provides a correlation among three environmental conditions: measured residual A-weighted sound-pressure level, proximity to a major roadway, and population density. Cited field-study data were used to compute the most probable 1/3 octave-band sound-pressure spectrum corresponding to any selected one of these three inputs. In turn, such spectra can be used as an input to models for prediction of noise impacts. This paper discusses specific algorithms included in the newly developed computer program ENMASK. In addition, the relative audibility of the environmental masking-noise spectra at different A-weighted sound levels is discussed, which is determined by using the methodology of program ENAUDIBL.

  8. Performance optimization of apodized FBG-based temperature sensors in single and quasi-distributed DWDM systems with new and different apodization profiles

    SciTech Connect (OSTI)

    Mohammed, Nazmi A.; Ali, Taha A. Aly, Moustafa H.

    2013-12-15

    In this work, different FBG temperature sensors are designed and evaluated with various apodization profiles. Evaluation is done under a wide range of controlling design parameters like sensor length and refractive index modulation amplitude, targeting a remarkable temperature sensing performance. New judgment techniques are introduced such as apodization window roll-off rate, asymptotic sidelobe (SL) decay level, number of SLs, and average SL level (SLav). Evaluation techniques like reflectivity, Full width at Half Maximum (FWHM), and Sidelobe Suppression Ratio (SLSR) are also used. A New apodization function is proposed, which achieves better performance like asymptotic decay of 18.4 dB/nm, high SLSR of 60 dB, high channel isolation of 57.9 dB, and narrow FWHM less than 0.15 nm. For a single accurate temperature sensor measurement in extensive noisy environment, optimum results are obtained by the Nuttall apodization profile and the new apodization function, which have remarkable SLSR. For a quasi-distributed FBG temperature sensor the Barthann and the new apodization profiles obtain optimum results. Barthann achieves a high asymptotic decay of 40 dB/nm, a narrow FWHM (less than 25 GHZ), a very low SLav of ?45.3 dB, high isolation of 44.6 dB, and a high SLSR of 35 dB. The new apodization function achieves narrow FWHM of 0.177 nm, very low SL of ?60.1, very low SLav of ?63.6 dB, and very high SLSR of ?57.7 dB. A study is performed on including an unapodized sensor among apodized sensors in a quasi-distributed sensing system. Finally, an isolation examination is performed on all the discussed apodizations and a linear relation between temperature and the Bragg wavelength shift is observed experimentally and matched with the simulated results.

  9. Reducing collective quantum state rotation errors with reversible dephasing

    SciTech Connect (OSTI)

    Cox, Kevin C.; Norcia, Matthew A.; Weiner, Joshua M.; Bohnet, Justin G.; Thompson, James K.

    2014-12-29

    We demonstrate that reversible dephasing via inhomogeneous broadening can greatly reduce collective quantum state rotation errors, and observe the suppression of rotation errors by more than 21?dB in the context of collective population measurements of the spin states of an ensemble of 2.110{sup 5} laser cooled and trapped {sup 87}Rb atoms. The large reduction in rotation noise enables direct resolution of spin state populations 13(1) dB below the fundamental quantum projection noise limit. Further, the spin state measurement projects the system into an entangled state with 9.5(5) dB of directly observed spectroscopic enhancement (squeezing) relative to the standard quantum limit, whereas no enhancement would have been obtained without the suppression of rotation errors.

  10. A bootstrapped, low-noise, and high-gain photodetector for shot noise measurement

    SciTech Connect (OSTI)

    Zhou, Haijun; Yang, Wenhai; Li, Zhixiu; Li, Xuefeng; Zheng, Yaohui

    2014-01-15

    We presented a low-noise, high-gain photodetector based on the bootstrap structure and the L-C (inductance and capacitance) combination. Electronic characteristics of the photodetector, including electronic noise, gain and frequency response, and dynamic range, were verified through a single-frequency Nd:YVO{sub 4} laser at 1064 nm with coherent output. The measured shot noise of 50 ?W laser was 13 dB above the electronic noise at the analysis frequency of 2 MHz, and 10 dB at 3 MHz. And a maximum clearance of 28 dB at 2 MHz was achieved when 1.52 mW laser was illuminated. In addition, the photodetector showed excellent linearities for both DC and AC amplifications in the laser power range between 12.5 ?W and 1.52 mW.

  11. Analysis of the generation of amplitude-squeezed light with Gaussian-beam degenerate optical parametric amplifiers

    SciTech Connect (OSTI)

    Koprulu, Kahraman G.; Aytur, Orhan

    2001-06-01

    We investigate the generation of amplitude-squeezed states with degenerate optical parametric amplifiers that are pumped by focused Gaussian beams. We present a model that facilitates the calculation of the squeezing level for an experimentally realistic configuration in which there is a Gaussian input signal beam that has the same confocal parameter and waist location as the Gaussian pump beam, with no restriction on the interaction length-to-confocal parameter ratio. We show that the 3-dB squeezing limit that was thought to be imposed by the Gaussian pump profile can be exceeded in the (previously uninvestigated) tight-focusing regime. We find the maximum possible amplitude squeezing in this regime to be 4.65 dB. However, it is possible to increase the squeezing level further by spatially filtering the tails of the output signal beam, resulting in squeezing levels in excess of 10 dB. {copyright} 2001 Optical Society of America

  12. Final Scientific/Technical Report Carbon Capture and Storage Training Northwest - CCSTNW

    SciTech Connect (OSTI)

    Workman, James

    2013-09-30

    This report details the activities of the Carbon Capture and Storage Training Northwest (CCSTNW) program 2009 to 2013. The CCSTNW created, implemented, and provided Carbon Capture and Storage (CCS) training over the period of the program. With the assistance of an expert advisory board, CCSTNW created curriculum and conducted three short courses, more than three lectures, two symposiums, and a final conference. The program was conducted in five phases; 1) organization, gap analysis, and form advisory board; 2) develop list serves, website, and tech alerts; 3) training needs survey; 4) conduct lectures, courses, symposiums, and a conference; 5) evaluation surveys and course evaluations. This program was conducted jointly by Environmental Outreach and Stewardship Alliance (dba. Northwest Environmental Training Center NWETC) and Pacific Northwest National Laboratories (PNNL).

  13. 2011 Chevrolet Volt VIN 0815 Plug-In Hybrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Matthew Shirk; Jeffrey Wishart

    2013-07-01

    The U.S. Department of Energy (DOE) Advanced Vehicle Testing Activity (AVTA) program consists of vehicle, battery, and infrastructure testing on advanced technology related to transportation. The activity includes tests on plug-in hybrid electric vehicles (PHEVs), including testing the PHEV batteries when both the vehicles and batteries are new and at the conclusion of 12,000 miles of on-road fleet testing. This report documents battery testing performed for the 2011 Chevrolet Volt PHEV (VIN 1G1RD6E48BU100815). The battery testing was performed by the Electric Transportation Engineering Corporation (eTec) dba ECOtality North America. The Idaho National Laboratory and ECOtality North America collaborate on the AVTA for the Vehicle Technologies Program of the DOE.

  14. 2011 Hyundai Sonata 4932 - Hybrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Matthew Shirk; Jeffrey Wishart

    2013-07-01

    The U.S. Department of Energy Advanced Vehicle Testing Activity Program consists of vehicle, battery, and infrastructure testing on advanced technology related to transportation. The activity includes tests on hybrid electric vehicles (HEVs), including testing the HEV batteries when both the vehicles and batteries are new and at the conclusion of 160,000 miles of on-road fleet testing. This report documents battery testing performed for the 2011 Hyundai Sonata Hybrid HEV (VIN KMHEC4A43BA004932). Battery testing was performed by the Electric Transportation Engineering Corporation dba ECOtality North America. The Idaho National Laboratory and ECOtality North America collaborate on the AVTA for the Vehicle Technologies Program of the DOE.

  15. Integrated deterministic and probabilistic safety analysis for safety assessment of nuclear power plants

    SciTech Connect (OSTI)

    Di Maio, Francesco; Zio, Enrico; Smith, Curtis; Rychkov, Valentin

    2015-07-06

    The present special issue contains an overview of the research in the field of Integrated Deterministic and Probabilistic Safety Assessment (IDPSA) of Nuclear Power Plants (NPPs). Traditionally, safety regulation for NPPs design and operation has been based on Deterministic Safety Assessment (DSA) methods to verify criteria that assure plant safety in a number of postulated Design Basis Accident (DBA) scenarios. Referring to such criteria, it is also possible to identify those plant Structures, Systems, and Components (SSCs) and activities that are most important for safety within those postulated scenarios. Then, the design, operation, and maintenance of these “safety-related” SSCs and activities are controlled through regulatory requirements and supported by Probabilistic Safety Assessment (PSA).

  16. Community

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * Slash Pine D Mixed Pine/Hardwood D Upland Hardwood D Bottomland Hardwood * Water ElI] Bottomland Hardwood/Pine 1:\1 Streams ~Rails NUtility ROW o Openwells Ii NPDES outfall Roads c::J Other Set-Asides o SRS Bays EEJ Hydric Soils 450 L Soil Series and Phase DAnB DBaB I::J NoB .Pk c:J Rm DWaB .Wm o Soils 450 900 Meters N A sc Figure 8-1. Plant cO/ll/llunities and soils associated with the Steel Creek Bay Set-Aside Area. 8-7 Set-Aside 8: Steel Creek Bay

  17. Compartment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    :I Compartment 860 Soils Soil Series and Phase DAnB DBaB DEnA DFa I!!!!!'!IHoA I!!!!ILuA DLuB .OcA =8Ps .Pk DRm .TrB DTrC DTrD .TuE ICITuF DVeD o o NPDES outfalls a Monrtoring Wells * Wastesites a Openwells D TES Plants (2) Ii.\V/ Roads &. Utility ROW ****... / Streams '.' TES Plants (1) IIIAreas [E] Hydric Soils D Three Rivers Landfill E2I Other Set*Asides Meters sc o Figure 14-2. Plant cOIlll1/unities and soils associated with the Mature Hardwood Forest Set-Aside Area. 14-7 Set-Aside 14:

  18. Integrated deterministic and probabilistic safety analysis for safety assessment of nuclear power plants

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Di Maio, Francesco; Zio, Enrico; Smith, Curtis; Rychkov, Valentin

    2015-07-06

    The present special issue contains an overview of the research in the field of Integrated Deterministic and Probabilistic Safety Assessment (IDPSA) of Nuclear Power Plants (NPPs). Traditionally, safety regulation for NPPs design and operation has been based on Deterministic Safety Assessment (DSA) methods to verify criteria that assure plant safety in a number of postulated Design Basis Accident (DBA) scenarios. Referring to such criteria, it is also possible to identify those plant Structures, Systems, and Components (SSCs) and activities that are most important for safety within those postulated scenarios. Then, the design, operation, and maintenance of these “safety-related” SSCs andmore » activities are controlled through regulatory requirements and supported by Probabilistic Safety Assessment (PSA).« less

  19. Consider the DME alternative for diesel engines

    SciTech Connect (OSTI)

    Fleisch, T.H.; Meurer, P.C.

    1996-07-01

    Engine tests demonstrate that dimethyl ether (DME, CH{sub 3}OCH{sub 3}) can provide an alternative approach toward efficient, ultra-clean and quiet compression ignition (CI) engines. From a combustion point of view, DME is an attractive alternative fuel for CI engines, primarily for commercial applications in urban areas, where ultra-low emissions will be required in the future. DME can resolve the classical diesel emission problem of smoke emissions, which are completely eliminated. With a properly developed DME injection and combustion system, NO{sub x} emissions can be reduced to 40% of Euro II or U.S. 1998 limits, and can meet the future ULEV standards of California. Simultaneously, the combustion noise is reduced by as much as 15 dB(A) below diesel levels. In addition, the classical diesel advantages such as high thermal efficiency, compression ignition, engine robustness, etc., are retained.

  20. The MicroBooNE Project - Home Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project Home Project Status Reporting Project Reports Monthly Reports Quarterly Reports, pre-CD2 PMG Meetings Project Management Group meetings are held on the 2nd Wednesday of each month, at 1pm CT in the Black Hole meeting room (WH2NW). Presentation materials are posted in the MicroBooNE DocDB, private access user-name is reviewer, password on request. From the DocDB home page, select Calendar, and on the Calendar click on PMG in the appropriate day box to bring up the meeting's Event Page.

  1. Enhanced four-wave mixing in graphene-silicon slow-light photonic crystal waveguides

    SciTech Connect (OSTI)

    Zhou, Hao E-mail: tg2342@columbia.edu; Gu, Tingyi E-mail: tg2342@columbia.edu McMillan, James F.; Wong, Chee Wei E-mail: tg2342@columbia.edu; Petrone, Nicholas; Zande, Arend van der; Hone, James C.; Yu, Mingbin; Lo, Guoqiang; Kwong, Dim-Lee; Feng, Guoying; Zhou, Shouhuan

    2014-09-01

    We demonstrate the enhanced four-wave mixing of monolayer graphene on slow-light silicon photonic crystal waveguides. 200-?m interaction length, a four-wave mixing conversion efficiency of ?23?dB is achieved in the graphene-silicon slow-light hybrid, with an enhanced 3-dB conversion bandwidth of about 17?nm. Our measurements match well with nonlinear coupled-mode theory simulations based on the measured waveguide dispersion, and provide an effective way for all-optical signal processing in chip-scale integrated optics.

  2. Analysis of main steam isolation valve leakage in design basis accidents using MELCOR 1.8.6 and RADTRAD.

    SciTech Connect (OSTI)

    Salay, Michael; Kalinich, Donald A.; Gauntt, Randall O.; Radel, Tracy E.

    2008-10-01

    Analyses were performed using MELCOR and RADTRAD to investigate main steam isolation valve (MSIV) leakage behavior under design basis accident (DBA) loss-of-coolant (LOCA) conditions that are presumed to have led to a significant core melt accident. Dose to the control room, site boundary and LPZ are examined using both approaches described in current regulatory guidelines as well as analyses based on best estimate source term and system response. At issue is the current practice of using containment airborne aerosol concentrations as a surrogate for the in-vessel aerosol concentration that exists in the near vicinity of the MSIVs. This study finds current practice using the AST-based containment aerosol concentrations for assessing MSIV leakage is non-conservative and conceptually in error. A methodology is proposed that scales the containment aerosol concentration to the expected vessel concentration in order to preserve the simplified use of the AST in assessing containment performance under assumed DBA conditions. This correction is required during the first two hours of the accident while the gap and early in-vessel source terms are present. It is general practice to assume that at {approx}2hrs, recovery actions to reflood the core will have been successful and that further core damage can be avoided. The analyses performed in this study determine that, after two hours, assuming vessel reflooding has taken place, the containment aerosol concentration can then conservatively be used as the effective source to the leaking MSIV's. Recommendations are provided concerning typical aerosol removal coefficients that can be used in the RADTRAD code to predict source attenuation in the steam lines, and on robust methods of predicting MSIV leakage flows based on measured MSIV leakage performance.

  3. DESIGN OF VISIBLE DIAGNOSTIC BEAMLINE FOR NSLS2 STORAGE RING

    SciTech Connect (OSTI)

    Cheng, W.; Fernandes, H.; Hseuh, H.; Kosciuk, B.; Krinsky, S.; Singh, O.

    2011-03-28

    A visible synchrotron light monitor (SLM) beam line has been designed at the NSLS2 storage ring, using the bending magnet radiation. A retractable thin absorber will be placed in front of the first mirror to block the central x-rays. The first mirror will reflect the visible light through a vacuum window. The light is guided by three 6-inch diameter mirrors into the experiment hutch. In this paper, we will describe design work on various optical components in the beamline. The ultra high brightness NSLS-II storage ring is under construction at Brookhaven National Laboratory. It will have 3GeV, 500mA electron beam circulating in the 792m ring, with very low emittance (0.9nm.rad horizontal and 8pm.rad vertical). The ring is composed of 30 DBA cells with 15 fold symmetry. Three damping wigglers will be installed in long straight sections 8, 18 and 28 to lower the emittance. While electrons pass through the bending magnet, synchrotron radiation will be generated covering a wide spectrum. There are other insertion devices in the storage ring which will generate shorter wavelength radiation as well. Synchrotron radiation has been widely used as diagnostic tool to measure the transverse and longitudinal profile. Three synchrotron light beam lines dedicated for diagnostics are under design and construction for the NSLS-II storage ring: two x-ray beam lines (pinhole and CRL) with the source points from Cell 22 BM{_}A (first bending in the DBA cell) and Cell22 three-pole wiggler; the third beam line is using visible part of radiation from Cell 30 BM{_}B (second bending magnet from the cell). Our paper focuses on the design of the visible beam line - SLM.

  4. Design and Simulation of Hybridization Experiments

    Energy Science and Technology Software Center (OSTI)

    1995-11-28

    DB EXP DESIGN is a suite of three UNIX shell-like programs, DWC which computes oligomer composition of DNA texts using directed acyclic word data structures; DWO, which simulates hybridization experiments; and DMI, which calculates the information contenet of individual probes, their mutual information content, and their joint information content through estimation of Markov trees.

  5. Document (225k)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EP-9 Hexion RIMR 035C RIMH 037 (100:28 by wt) PPG-Devold DB810-E05-A 6h70 C infusion 2292-351 20 C 2292-353 2292-352 2292-349 2292-347 2292-341 Coupon failure...

  6. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 10 20 30 40 50 60 70 80 90 -35 -30 -25 -20 -15 -10 -5 0 LDR 10 log10(Z vh Z hh ), dB elevation angle, deg plates, P1a, 0.9 gcm -3 , 15 o , D m 500 m...

  7. Metadata management staging system

    Energy Science and Technology Software Center (OSTI)

    2013-08-01

    Django application providing a user-interface for building a file and metadata management system. An evolution of our Node.js and CouchDb metadata management system. This one focuses on server functionality and uses a well-documented, rational and REST-ful API for data access.

  8. BPA-2014-00720-FOIA Response

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2014 In reply refer to: D-B1 Richard van Dijk Another Way BPA Ex 6 FOIA BPA-2014-00720-F Dear Mr. van Dijk: This is the final response to your request for records that you made...

  9. Consolidated Electric Coop Inc | Open Energy Information

    Open Energy Info (EERE)

    Electric Coop Inc Place: Ohio Website: www.consolidated.coop Twitter: @12fv1H Facebook: http:wd.sharethis.comapisharer.php?fpc9dcaefa-14db5d7d2e7-1ec5d2d1-1&sessionID...

  10. Facilities for exploring molecular biology databases on the Web: A comparative study

    SciTech Connect (OSTI)

    Markowitz, V.M.; Chen, I.M.A.; Kosky, A.S.; Szeto, E.

    1996-12-31

    We discuss criteria for evaluating and comparing the main facilities provided by molecular biology databases (MBDs) for exploring (that is, retrieving and interpreting data) on the Web. We use these criteria for examining the facilities supported by typical MBDs such as Genbank, AtDB, GSDB, GDB, and MGD (as of September 5, 1996). 19 refs.

  11. Revised Manuscript

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 (1955) 986, 1008 1955HO1B Hornyak and Sherr, Phys. Rev. 100 (1955) 1409 1955JA18 D.B. James, W. Kubelka, S.A. Heiberg and J.B. Warren, Can. J. Phys. 33 (1955) 219 1955JA1D...

  12. Revised Manuscript

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Libby, Phys. Rev. 100 (1955) 799 1955HU1B Hughes and Harvey, BNL-325 (1955) 1955JA18 D.B. James, W. Kubelka, S.A. Heiberg and J.B. Warren, Can. J. Phys. 33 (1955) 219 1955KH31 L.M....

  13. Generation of a polarised supercontinuum in small-diameter quasi-elliptic fibres

    SciTech Connect (OSTI)

    Kobtsev, Sergey M; Kukarin, S V; Fateev, N V

    2003-12-31

    A supercontinuum is generated for the first time and studied in twin tapered fibres with a micron waist upon pumping by femtosecond pulses. The supercontinuum is obtained in the range from 460 to 1070 nm at the -28 dB level with the degree of polarisation up to 97 %. The polarisation and coherent properties of the supercontinuum are studied experimentally. (fibres)

  14. High Temperature Reactor (HTR) Deep Burn Core and Fuel Analysis: Design Selection for the Prismatic Block Reactor With Results from FY-2011 Activities

    SciTech Connect (OSTI)

    Michael A. Pope

    2011-10-01

    The Deep Burn (DB) Project is a U.S. Department of Energy sponsored feasibility study of Transuranic Management using high burnup fuel in the high temperature helium cooled reactor (HTR). The DB Project consists of seven tasks: project management, core and fuel analysis, spent fuel management, fuel cycle integration, TRU fuel modeling, TRU fuel qualification, and HTR fuel recycle. In the Phase II of the Project, we conducted nuclear analysis of TRU destruction/utilization in the HTR prismatic block design (Task 2.1), deep burn fuel/TRISO microanalysis (Task 2.3), and synergy with fast reactors (Task 4.2). The Task 2.1 covers the core physics design, thermo-hydraulic CFD analysis, and the thermofluid and safety analysis (low pressure conduction cooling, LPCC) of the HTR prismatic block design. The Task 2.3 covers the analysis of the structural behavior of TRISO fuel containing TRU at very high burnup level, i.e. exceeding 50% of FIMA. The Task 4.2 includes the self-cleaning HTR based on recycle of HTR-generated TRU in the same HTR. Chapter IV contains the design and analysis results of the 600MWth DB-HTR core physics with the cycle length, the average discharged burnup, heavy metal and plutonium consumptions, radial and axial power distributions, temperature reactivity coefficients. Also, it contains the analysis results of the 450MWth DB-HTR core physics and the analysis of the decay heat of a TRU loaded DB-HTR core. The evaluation of the hot spot fuel temperature of the fuel block in the DB-HTR (Deep-Burn High Temperature Reactor) core under full operating power conditions are described in Chapter V. The investigated designs are the 600MWth and 460MWth DB-HTRs. In Chapter VI, the thermo-fluid and safety of the 600MWth DB-HTRs has been analyzed to investigate a thermal-fluid design performance at the steady state and a passive safety performance during an LPCC event. Chapter VII describes the analysis results of the TRISO fuel microanalysis of the 600MWth and 450MWth DB-HTRs. The TRISO fuel microanalysis covers the gas pressure buildup in a coated fuel particle including helium production, the thermo-mechanical behavior of a CFP, the failure probabilities of CFPs, the temperature distribution in a CPF, and the fission product (FP) transport in a CFP and a graphite. In Chapter VIII, it contains the core design and analysis of sodium cooled fast reactor (SFR) with deep burn HTR reactor. It considers a synergistic combination of the DB-MHR and an SFR burner for a safe and efficient transmutation of the TRUs from LWRs. Chapter IX describes the design and analysis results of the self-cleaning (or self-recycling) HTR core. The analysis is considered zero and 5-year cooling time of the spent LWR fuels.

  15. High Temperature Reactor (HTR) Deep Burn Core and Fuel Analysis: Design Selection for the Prismatic Block Reactor

    SciTech Connect (OSTI)

    Francesco Venneri; Chang-Keun Jo; Jae-Man Noh; Yonghee Kim; Claudio Filippone; Jonghwa Chang; Chris Hamilton; Young-Min Kim; Ji-Su Jun; Moon-Sung Cho; Hong-Sik Lim; MIchael A. Pope; Abderrafi M. Ougouag; Vincent Descotes; Brian Boer

    2010-09-01

    The Deep Burn (DB) Project is a U.S. Department of Energy sponsored feasibility study of Transuranic Management using high burnup fuel in the high temperature helium cooled reactor (HTR). The DB Project consists of seven tasks: project management, core and fuel analysis, spent fuel management, fuel cycle integration, TRU fuel modeling, TRU fuel qualification, and HTR fuel recycle. In the Phase II of the Project, we conducted nuclear analysis of TRU destruction/utilization in the HTR prismatic block design (Task 2.1), deep burn fuel/TRISO microanalysis (Task 2.3), and synergy with fast reactors (Task 4.2). The Task 2.1 covers the core physics design, thermo-hydraulic CFD analysis, and the thermofluid and safety analysis (low pressure conduction cooling, LPCC) of the HTR prismatic block design. The Task 2.3 covers the analysis of the structural behavior of TRISO fuel containing TRU at very high burnup level, i.e. exceeding 50% of FIMA. The Task 4.2 includes the self-cleaning HTR based on recycle of HTR-generated TRU in the same HTR. Chapter IV contains the design and analysis results of the 600MWth DB-HTR core physics with the cycle length, the average discharged burnup, heavy metal and plutonium consumptions, radial and axial power distributions, temperature reactivity coefficients. Also, it contains the analysis results of the 450MWth DB-HTR core physics and the analysis of the decay heat of a TRU loaded DB-HTR core. The evaluation of the hot spot fuel temperature of the fuel block in the DB-HTR (Deep-Burn High Temperature Reactor) core under full operating power conditions are described in Chapter V. The investigated designs are the 600MWth and 460MWth DB-HTRs. In Chapter VI, the thermo-fluid and safety of the 600MWth DB-HTRs has been analyzed to investigate a thermal-fluid design performance at the steady state and a passive safety performance during an LPCC event. Chapter VII describes the analysis results of the TRISO fuel microanalysis of the 600MWth and 450MWth DB-HTRs. The TRISO fuel microanalysis covers the gas pressure buildup in a coated fuel particle including helium production, the thermo-mechanical behavior of a CFP, the failure probabilities of CFPs, the temperature distribution in a CPF, and the fission product (FP) transport in a CFP and a graphite. In Chapter VIII, it contains the core design and analysis of sodium cooled fast reactor (SFR) with deep burn HTR reactor. It considers a synergistic combination of the DB-MHR and an SFR burner for a safe and efficient transmutation of the TRUs from LWRs. Chapter IX describes the design and analysis results of the self-cleaning (or self-recycling) HTR core. The analysis is considered zero and 5-year cooling time of the spent LWR fuels.

  16. Exposure Evaluation for Benzene, Lead and Noise in Vehicle and Equipment Repair Shops

    SciTech Connect (OSTI)

    Sweeney, Lynn C.

    2013-04-10

    An exposure assessment was performed at the equipment and vehicle maintenance repair shops operating at the U. S. Department of Energy Hanford site, in Richland, Washington. The maintenance shops repair and maintain vehicles and equipment used in support of the Hanford cleanup mission. There are three general mechanic shops and one auto body repair shop. The mechanics work on heavy equipment used in construction, cranes, commercial motor vehicles, passenger-type vehicles in addition to air compressors, generators, and farm equipment. Services include part fabrication, installation of equipment, repair and maintenance work in the engine compartment, and tire and brake services. Work performed at the auto body shop includes painting and surface preparation which involves applying body filler and sanding. 8-hour time-weighted-average samples were collected for benzene and noise exposure and task-based samples were collected for lead dust work activities involving painted metal surfaces. Benzene samples were obtained using 3M 3520 sampling badges and were analyzed for additional volatile organic compounds. These compounds were selected based on material safety data sheet information for the aerosol products used by the mechanics for each day of sampling. The compounds included acetone, ethyl ether, toluene, xylene, VM&P naphtha, methyl ethyl ketone, and trichloroethylene. Laboratory data for benzene, VM&P naphtha, methyl ethyl ketone and trichloroethylene were all below the reporting detection limit. Airborne concentrations for acetone, ethyl ether, toluene and xylene were all less than 10% of their occupational exposure limit. The task-based samples obtained for lead dusts were submitted for a metal scan analysis to identify other metals that might be present. Laboratory results for lead dusts were all below the reporting detection limit and airborne concentration for the other metals observed in the samples were less than 10% of the occupational exposure limit. Noise dosimetry sampling was performed on a random basis and was representative of the different work activities within the four shops. Twenty three percent of the noise samples exceeded the occupational exposure limit of 85 decibels for an 8-hour time-weightedaverage. Work activities where noise levels were higher included use of impact wrenches and grinding wheels.

  17. KUGEL: a thermal, hydraulic, fuel performance, and gaseous fission product release code for pebble bed reactor core analysis

    SciTech Connect (OSTI)

    Shamasundar, B.I.; Fehrenbach, M.E.

    1981-05-01

    The KUGEL computer code is designed to perform thermal/hydraulic analysis and coated-fuel particle performance calculations for axisymmetric pebble bed reactor (PBR) cores. This computer code was developed as part of a Department of Energy (DOE)-funded study designed to verify the published core performance data on PBRs. The KUGEL code is designed to interface directly with the 2DB code, a two-dimensional neutron diffusion code, to obtain distributions of thermal power, fission rate, fuel burnup, and fast neutron fluence, which are needed for thermal/hydraulic and fuel performance calculations. The code is variably dimensioned so that problem size can be easily varied. An interpolation routine allows variable mesh size to be used between the 2DB output and the two-dimensional thermal/hydraulic calculations.

  18. Proposal of a gigawatt-class L/Ku dual-band magnetically insulated transmission line oscillator

    SciTech Connect (OSTI)

    Ju, J.-C. Fan, Y.-W.; Shu, T.; Zhong, H.-H.

    2014-10-15

    We present a gigawatt (GW)-class magnetically insulated transmission line oscillator (MILO) which is capable of generating dual-band high power microwaves (HPMs). The proposed device, deriving from previously studied complex MILO and dual-frequency MILO, is designed to produce two HPMs in L-band and Ku-band, respectively. It is found in particle-in-cell (PIC) simulation that when the diode voltage is 610?kV, HPMs with frequencies of 1.72 GHz and 14.6?GHz can be achieved with powers of 3.3?GW and 2.4?GW, respectively. The corresponding total power conversion efficiency is approximately 12.8%. Power difference of the two generated HPMs is approximately 1.4?dB, and frequency difference of them reaches a level as high as ?10?dB.

  19. Modular cryogenic interconnects for multi-qubit devices

    SciTech Connect (OSTI)

    Colless, J. I.; Reilly, D. J.

    2014-11-15

    We have developed a modular interconnect platform for the control and readout of multiple solid-state qubits at cryogenic temperatures. The setup provides 74 filtered dc-bias connections, 32 control and readout connections with ?3 dB frequency above 5 GHz, and 4 microwave feed lines that allow low loss (less than 3 dB) transmission 10 GHz. The incorporation of a radio-frequency interposer enables the platform to be separated into two printed circuit boards, decoupling the simple board that is bonded to the qubit chip from the multilayer board that incorporates expensive connectors and components. This modular approach lifts the burden of duplicating complex interconnect circuits for every prototype device. We report the performance of this platform at milli-Kelvin temperatures, including signal transmission and crosstalk measurements.

  20. Miniaturized LTCC elliptic-function lowpass filters with side stopbands

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hsieh, Lung -Hwa; Dai, Steve Xunhu

    2015-05-28

    A compact, high-selectivity, and wide stopband lowpass filter is highly demanded in wireless communication systems to suppress adjacent harmonics and unwanted signals. In this letter, a new miniaturized lowpass filter with elliptic-function frequency response is introduced. The filter is fabricated in multilayer low temperature cofired ceramics. The size of the miniaturized filter is 5.5 × 3.9 × 1.72 mm3. As a result, the measured insertion loss of the filter is better than 0.37 dB from DC to 1.28 GHz and the measured stopband of the filter is great than 22 dB from 2.3 to 7.5 GHz.

  1. Ex situ Ohmic contacts on thin film YBa sub 2 Cu sub 3 O sub 7 minus x

    SciTech Connect (OSTI)

    Pendrick, V.; Brown, R.; Matey, J.R. ); Findikoglu, A.; Xi, X.X.; Venkatesan, T. ); Inam, A. )

    1991-06-01

    We report on {ital ex} {ital situ} fabrication of gold contacts onto patterned YBa{sub 2}Cu{sub 3}O{sub 7{minus}{ital x}} films. Gold seed layers were blanket sputtered onto photoresist defined over the patterned films. In a second photo process, openings were aligned to the original pads and 8-{mu}m-thick contacts were electroplated. The two layers of photoresist and sputtered gold were removed leaving defined contacts. We obtained specific contact resistance of 2.6{times}10{sup {minus}7} {Omega} cm{sup 2} on post-annealed samples at 79 K. Microwave filters with contacts showed 4.2 dB loss at 9 GHz and 77 K, while comparable filters in copper showed 18 dB loss.

  2. Pyroelectric response mechanism of barium strontium titanate ceramics in dielectric bolometer mode: The underlying essence of the enhancing effect of direct current bias field

    SciTech Connect (OSTI)

    Mao, Chaoliang; Cao, Sheng; Yan, Shiguang; Yao, Chunhua; Cao, Fei; Wang, Genshui; Dong, Xianlin; Hu, Xu; Yang, Chunli

    2013-06-17

    Pyroelectric response mechanism of Ba{sub 0.70}Sr{sub 0.30}TiO{sub 3} ceramics under dielectric bolometer (DB) mode was investigated by dielectric and pyroelectric properties measurement. The variations of total, intrinsic, and induced pyroelectric coefficients (p{sub tot}, p{sub int}, p{sub ind}) with temperatures and bias fields were analyzed. p{sub int} plays the dominant role to p{sub tot} through most of the temperature range and p{sub ind} will be slightly higher than p{sub int} above T{sub 0}. The essence of the enhancing effect of DC bias field on pyroelectric coefficient can be attributed to the high value of p{sub int}. This mechanism is useful for the pyroelectric materials (DB mode) applications.

  3. A novel self-sensing technique for tapping-mode atomic force microscopy

    SciTech Connect (OSTI)

    Ruppert, Michael G.; Moheimani, S. O. Reza

    2013-12-15

    This work proposes a novel self-sensing tapping-mode atomic force microscopy operation utilizing charge measurement. A microcantilever coated with a single piezoelectric layer is simultaneously used for actuation and deflection sensing. The cantilever can be batch fabricated with existing micro electro mechanical system processes. The setup enables the omission of the optical beam deflection technique which is commonly used to measure the cantilever oscillation amplitude. Due to the high amount of capacitive feedthrough in the measured charge signal, a feedforward control technique is employed to increase the dynamic range from less than 1 dB to approximately 35 dB. Experiments show that the conditioned charge signal achieves excellent signal-to-noise ratio and can therefore be used as a feedback signal for atomic force microscopy imaging.

  4. SAR processing with non-linear FM chirp waveforms.

    SciTech Connect (OSTI)

    Doerry, Armin Walter

    2006-12-01

    Nonlinear FM (NLFM) waveforms offer a radar matched filter output with inherently low range sidelobes. This yields a 1-2 dB advantage in Signal-to-Noise Ratio over the output of a Linear FM (LFM) waveform with equivalent sidelobe filtering. This report presents details of processing NLFM waveforms in both range and Doppler dimensions, with special emphasis on compensating intra-pulse Doppler, often cited as a weakness of NLFM waveforms.

  5. Compact antenna arrays with wide bandwidth and low sidelobe levels

    DOE Patents [OSTI]

    Strassner, II, Bernd H.

    2014-09-09

    Highly efficient, low cost, easily manufactured SAR antenna arrays with lightweight low profiles, large instantaneous bandwidths and low SLL are disclosed. The array topology provides all necessary circuitry within the available antenna aperture space and between the layers of material that comprise the aperture. Bandwidths of 15.2 GHz to 18.2 GHz, with 30 dB SLLs azimuthally and elevationally, and radiation efficiencies above 40% may be achieved. Operation over much larger bandwidths is possible as well.

  6. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Improving the Representation of Aerosol-Cloud- Precipitation Interactions in Numerical Models D.B. Mechem and Y.L. Kogan Cooperative Institute for Mesoscale Meteorological Studies University of Oklahoma Norman, Oklahoma Introduction Accurately representing aerosol indirect effects in large-scale numerical models requires microphysical parameterizations that treat complex aerosol-cloud-precipitation interactions in a realistic manner. Here we address two important aspects of these microphysical

  7. Research Highlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forcing Boundary Layer Cloud Systems with Multi-Dimensional Radiation Download a printable PDF Submitter: Mechem, D. B., University of Kansas Kogan, Y., University of Oklahoma - CIMMS Ovchinnikov, M., Pacific Northwest National Laboratory Davis, A. B., Jet Propulsion Laboratory Evans, F., University of Colorado Ellingson, R. G., Florida State University Area of Research: Cloud Distributions/Characterizations Working Group(s): Cloud Modeling, Radiative Processes Journal Reference: Mechem, DB, YL

  8. Research Highlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modeling Precipitating Cumulus Congestus Observed by the ARM Radar Suite During the MC3E Field Campaign Download a printable PDF Submitter: Mechem, D. B., University of Kansas Area of Research: Cloud Processes Working Group(s): Cloud Life Cycle, Cloud-Aerosol-Precipitation Interactions Journal Reference: Mechem DB, SE Giangrande, CS Wittman, P Borque, T Toto, and P Kollias. 2015. "Insights from modeling and observational evaluation of a precipitating continental cumulus event observed

  9. ARM - Publications: Science Team Meeting Documents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spatial Hetergeneity in Mid-Summer Fluxes of Carbon, Water and Energy in Agriculutural Plots Near the SGP Central Facility Fischer, M.L.(a), Billesbach, D.(b), Berry, J.(c), Riley, W.R.(a), and Torn, M.S.(a), Lawrence Berkeley National Laboratory (a), University of Nebraska (b), Carnegie Institution of Washington (c) Twelfth Atmospheric Radiation Measurement (ARM) Science Team Meeting Patterns of land use and management are likely to dominate the spatial heterogeneity in cycles of energy,

  10. Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Workflow Solutions for Fusion using NERSC Alice Koniges, Shreyas Cholia, Prabhat, Yushu Yao National Energy Research Scientific Computing Center Lawrence Berkeley National Laboratory Corresponding Author: aekoniges@lbl.gov In this white paper, we advocate three elements; the NERSC data partition, a connection of workflow elements using open source tools such as an IPython Notebook, and the Scientific Data Base (SciDB) infrastructure. A majority of the fusion scientists in the US, and a large

  11. Center for Nanophase Materials Sciences (CNMS) - CNMS Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CNMS RESEARCH Synthesis and Directed Growth of Single-Crystal TCNQ-Cu Organic Nanowires K. Xiao, J. Tao, and Z. Liu (CNMS Postdocs); I. N. Ivanov, A.A. Puretzky, Z. Pan, and D.B. Geohegan (CNMS Staff); and S. J. Pennycook (ORNL) Achievement Few synthesis experiments have been reported for nanowires of organic semiconductors, despite the proposed use of organic thin-film materials in energy-related optoelectronic devices such as solid state lighting and photovoltaic cells. Although nanostructures

  12. Energy Economy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sieminski (202) 662-1624 April 2010 Energy and the Economy US EIA & JHU SAIS 2010 Energy Conference April 6, 2010 All prices are those current at the end of the previous trading session unless otherwise indicated. Prices are sourced from local exchanges via Reuters, Bloomberg and other vendors. Data is sourced from Deutsche Bank and subject companies. DISCLOSURES AND ANALYST CERTIFICATIONS ARE LOCATED IN APPENDIX 1. Adam Sieminski, CFA Chief Energy Economist adam.sieminski@db.com +1 202 662

  13. Joaquin Correa JoaquinCorrea@lbl.gov NERSC Data and Analytics Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Joaquin Correa JoaquinCorrea@lbl.gov NERSC Data and Analytics Services NERSC User Meeting August, 2015 Data Analytics at NERSC Data analytics at NERSC Hardware Resource Management Runtime Framework Tools + Libraries Analytics Capabilities Science Applications Climate, Cosmology, Kbase, Materials, BioImaging, Your science! Statistics, Machine Learning R, python, MLBase Image Processing MATLAB OMERO, Fiji Graph Analytics GraphX Database Operations SQL MPI Spark SciDB Filesystems (Lustre),

  14. Wideband precision analog telemetry link using digital techniques

    SciTech Connect (OSTI)

    Hearn, W.E.

    1982-10-01

    A highly linear Wideband Analog Fiber Optic Link is described which samples at a 1 MHz rate with 10-bit accuracy and transmits and receives by means of a high speed PDM code. Aliasing and sampling effects are fully suppressed and a nearly Gaussian pulse response is attained with a 2 ..mu..sec risetime. Analog signals are recovered with very low distortion and d.c. drift and a S/N ratio of better than 52 db.

  15. MEMORANDUM TO: FROM:

    Office of Legacy Management (LM)

    7 .i$, I Db ' MEMORANDUM TO: FROM: 25- DATE m---v ---B--B SUBJECT: , SITE . NAME: cc4 % * : ---------------- . ---------w--- C -----I CITY: c-c---a. ---------------'--,,,,,,,, STATE: &&.&- BMW OWNER (" --Lz;:[ ---------B-B- &j J?-~~~,,, ------w- -------------------------- Owner contacted 0 yes 0 no; if yes1 date contacted me-----w-m--- TYPE OF OPERATION -- * --w------w--- esearch & Development 0 Production scale testing Bench Scale Process 0 Theoretical Studies 0 Sample

  16. Controlling output pulse and prepulse in a resonant microwave pulse compressor

    SciTech Connect (OSTI)

    Shlapakovski, A.; Artemenko, S.; Chumerin, P.; Yushkov, Yu.

    2013-02-07

    A resonant microwave pulse compressor with a waveguide H-plane-tee-based energy extraction unit was studied in terms of its capability to produce output pulses that comprise a low-power long-duration (prepulse) and a high-power short-duration part. The application of such combined pulses with widely variable prepulse and high-power pulse power and energy ratios is of interest in the research area of electronic hardware vulnerability. The characteristics of output radiation pulses are controlled by the variation of the H-plane tee transition attenuation at the stage of microwave energy storage in the compressor cavity. Results of theoretical estimations of the parameters tuning range and experimental investigations of the prototype S-band compressor (1.5 MW, 12 ns output pulse; {approx}13.2 dB gain) are presented. The achievable maximum in the prepulse power is found to be about half the power of the primary microwave source. It has been shown that the energy of the prepulse becomes comparable with that of the short-duration (nanosecond) pulse, while the power of the latter decreases insignificantly. The possible range of variation of the prepulse power and energy can be as wide as 40 dB. In the experiments, the prepulse level control within the range of {approx}10 dB was demonstrated.

  17. Revenue adequate bidding strategies in competitive electricity markets

    SciTech Connect (OSTI)

    Li, C.; Svoboda, A.J.; Guan, X.; Singh, H.

    1999-05-01

    Energy trading in a competitive electricity market can be modeled as a two-level optimization. At the top level a Centralized Economic Dispatch (CED) uses a priority list method to solve the fundamental problem of reliable market clearing with price discovery. The lower level consists of a set of Decentralized Bidding (DB) subproblems. The DB model uses a self-unit scheduling simulator based on parametric dynamic programming to produce hourly bid curves for the central dispatch coordinator. Unit operating constraints and costs such as the unit minimum-up and minimum-down times, ramp rates, and the unit start-up, no-load and sunk capital costs are internalized in the bid curves through the simulator. A special algorithm is presented to solve the revenue adequacy problem for marginal units. Both CED and DB models are based on the revenue maximization in contrast with the cost minimization criteria used in the conventional Unit Commitment (UC). The proposed method has been tested in a study case and some interesting results have been demonstrated.

  18. Optimization of La{sub 0.7}Ba{sub 0.3}MnO{sub 3-{delta}} complex oxide laser ablation conditions by plume imaging and optical emission spectroscopy

    SciTech Connect (OSTI)

    Amoruso, S.; Bruzzese, R.; Scotti di Uccio, U.; Aruta, C.; Granozio, F. Miletto; Wang, X.; Maccariello, D.; Maritato, L.; Orgiani, P.

    2010-08-15

    The properties of thin films of complex oxides, such as La{sub 1-x}D{sub x}MnO{sub 3-{delta}} (D=Ba, Ca, Sr, etc.), produced by pulsed laser deposition depend critically on the experimental parameters in which laser ablation is carried out. Here, we report a comparative analysis of the pulsed laser ablation process of La{sub 0.7}Ba{sub 0.3}MnO{sub 3-{delta}}, in oxygen background, in the ambient pressure range from 10{sup -2} to 1 mbar, typically employed in pulsed laser deposition of manganites. The laser ablation plume was studied by using time-gated imaging and optical emission spectroscopy techniques. It was found that at a pressure of {approx_equal}10{sup -2} mbar, the plume species arriving at the substrate are characterized by hyperthermal kinetic energy ({approx_equal}10 eV), and high degree of excitation. On the contrary, at larger oxygen pressure (0.1-1 mbar), the velocity of plume species reaching the substrate, and their degree of excitation are much reduced by the confining effects of the background gas. These features explain why an appropriate choice of the experimental conditions in which the deposition process is carried out leads to better quality films, providing helpful indications to improve control over the growth process of both La{sub 1-x}D{sub x}MnO{sub 3-{delta}} and other perovskitic oxides.

  19. Lattice and Collective Effects for PEP-X

    SciTech Connect (OSTI)

    Bane, Karl; Cai, Yunhai; Chao, Alex; Hettel, Robert; Huang, Zhirong; Nosochkov, Yuri; Stupakov, Gennady; Wang, Lanfa; Wang, Min-Huey; /SLAC

    2008-05-13

    This is a more comprehensive report of the accelerator physics in the white paper 'PEP-X Light Source at SLAC'. A new light source called 'PEP-X' would reside in the 2.2-km PEP-II tunnel. It has a hybrid lattice where two of its six arcs contain DBA cells that provide a total of 30 straight sections for insertion device beam lines and the remaining arcs contain TME cells for an extremely low emittance. Using 90 meter damping wigglers the horizontal emittance at 4.5 GeV is further reduced to 0.1 nm-rad. Many collective effects including intra-beam scattering, Touschek lifetime, and fast ion instability are studied. We expect that PEP-X will produce photon beams having brightnesses near 10{sup 22} (ph/s/mm{sup 2}/mrad{sup 2}/0.1% BW) at 10 keV and 10{sup 21} at 35 keV.

  20. Application of the DG-1199 methodology to the ESBWR and ABWR.

    SciTech Connect (OSTI)

    Kalinich, Donald A.; Gauntt, Randall O.; Walton, Fotini

    2010-09-01

    Appendix A-5 of Draft Regulatory Guide DG-1199 'Alternative Radiological Source Term for Evaluating Design Basis Accidents at Nuclear Power Reactors' provides guidance - applicable to RADTRAD MSIV leakage models - for scaling containment aerosol concentration to the expected steam dome concentration in order to preserve the simplified use of the Accident Source Term (AST) in assessing containment performance under assumed design basis accident (DBA) conditions. In this study Economic and Safe Boiling Water Reactor (ESBWR) and Advanced Boiling Water Reactor (ABWR) RADTRAD models are developed using the DG-1199, Appendix A-5 guidance. The models were run using RADTRAD v3.03. Low Population Zone (LPZ), control room (CR), and worst-case 2-hr Exclusion Area Boundary (EAB) doses were calculated and compared to the relevant accident dose criteria in 10 CFR 50.67. For the ESBWR, the dose results were all lower than the MSIV leakage doses calculated by General Electric/Hitachi (GEH) in their licensing technical report. There are no comparable ABWR MSIV leakage doses, however, it should be noted that the ABWR doses are lower than the ESBWR doses. In addition, sensitivity cases were evaluated to ascertain the influence/importance of key input parameters/features of the models.

  1. Scanning Tranmission X-ray Microscopic Analysis of Purifed Melanosomes of the Mouse Iris

    SciTech Connect (OSTI)

    Anderson,M.; Haraszti, T.; Peterson, G.; Wirick, S.; Jacobsen, C.; John, S.; Grunze, M.

    2006-01-01

    Melanosomes are specialized intracellular membrane bound organelles that produce and store melanin pigment. The composition of melanin and distribution of melanosomes determine the color of many mammalian tissues, including the hair, skin, and iris. However, the presence of melanosomes within a tissue carries potentially detrimental risks related to the cytotoxic indole-quinone intermediates produced during melanin synthesis. In order to study melanosomal molecules, including melanin and melanin-related intermediates, we have refined methods allowing spectromicroscopic analysis of purified melanosomes using scanning transmission X-ray microscopy. Here, we present for the first time absorption data for melanosomes at the carbon absorption edge ranging from 284 to 290 eV. High-resolution images of melanosomes at discrete energies demonstrate that fully melanized mature melanosomes are internally non-homogeneous, suggesting the presence of an organized internal sub-structure. Spectra of purified melanosomes are complex, partially described by a predominating absorption band at 288.4 eV with additional contributions from several minor bands. Differences in these spectra were detectable between samples from two strains of inbred mice known to harbor genetically determined melanosomal differences, DBA/2J and C57BL/6J, and are likely to represent signatures arising from biologically relevant and tractable phenomena.

  2. Electric Power Research Institute Environmental Control Technology Center final monthly technical report, August 1995

    SciTech Connect (OSTI)

    1995-08-01

    Operations and maintenance continued this month at the Electric Power Research Institute`s Environmental Control Technology Center. Testing on the 4.0 MW Pilot Wet FGD unit this month involved the Trace Element Removal (TER) test block, and the simultaneous testing of the Lime Forced Oxidation process with DBA addition (LDG). Additionally, the second phase of the 1995 Carbon Injection test block began this month with the SDA/PJFF test configuration. At the end of the LDG testing this month, a one-week baseline test was conducted to generate approximately 200 lbs. of magnesium-lime FGD solids for analysis. On the 1.0 MW Post-FGD Selective Catalytic Reduction (SCR) unit, performance testing was continued this month as measurements were taken for NO{sub x} removal efficiency, residual ammonia slip, and S0{sub 3} generation across the catalysts installed in the reactor. As a result of new directions received from EPRI, this will be the last scheduled month of testing for the SCR unit in 1995. At the completion of this month, the unit will be isolated from the flue gas path and placed in a cold-standby mode for future test activities. This report describes the status of facilities and test facilities at the pilot and mini-pilot plants.

  3. Prediction of number of breached rods following a LBLOCA of Candu plants using a BEPU approach

    SciTech Connect (OSTI)

    Bang, Y. S.; Kim, K.; Seul, K. W.; Woo, S. W.; Han, B. S.

    2012-07-01

    Radioactive doses following design basis accidents (DBA) have been important safety criteria of Candu nuclear power plant and they have been predicted in terms of the number of breached fuel rods. To support the licensing review on this concern, an analysis of LBLOCA has been conducted by using the BEPU method of KINS, KINS-REM. Number of Breached Rods (NBR) following a LBLOCA was predicted at 95 percentile probabilistic upper level in 95 percentile confidence level. Peak Cladding Temperatures (PCT) of the 84 bundles in the core pass 4 were calculated from the 124 MARS code runs in which the uncertainties of 10 major parameters including fuel thermal conductivity and break flow model were implemented. The fuel rod breaching criteria, PCT>1477 K, was used to determine the NBR 95/95. From the calculation, the predicted NBR 95/95 was 1591 rods and the calculated maximum NBR was lower than 2000 rods. Through the further improvements in feedback of the channel power behavior to thermalhydraulic calculation and in channel group modeling, NBR in more reliable level can be expected. (authors)

  4. CloudSat as a Global Radar Calibrator

    SciTech Connect (OSTI)

    Protat, Alain; Bouniol, Dominique; O'Connor, E. J.; Baltink, Henk K.; Verlinde, J.; Widener, Kevin B.

    2011-03-01

    The calibration of the CloudSat spaceborne cloud radar has been thoroughly assessed using very accurate internal link budgets before launch, comparisons with predicted ocean surface backscatter at 94 GHz, direct comparisons with airborne cloud radars, and statistical comparisons with ground-based cloud radars at different locations of the world. It is believed that the calibration of CloudSat is accurate to within 0.5 to 1 dB. In the present paper it is shown that an approach similar to that used for the statistical comparisons with ground-based radars can now be adopted the other way around to calibrate other ground-based or airborne radars against CloudSat and / or detect anomalies in long time series of ground-based radar measurements, provided that the calibration of CloudSat is followed up closely (which is the case). The power of using CloudSat as a Global Radar Calibrator is demonstrated using the Atmospheric Radiation Measurement cloud radar data taken at Barrow, Alaska, the cloud radar data from the Cabauw site, The Netherlands, and airborne Doppler cloud radar measurements taken along the CloudSat track in the Arctic by the RASTA (Radar SysTem Airborne) cloud radar installed in the French ATR-42 aircraft for the first time. It is found that the Barrow radar data in 2008 are calibrated too high by 9.8 dB, while the Cabauw radar data in 2008 are calibrated too low by 8.0 dB. The calibration of the RASTA airborne cloud radar using direct comparisons with CloudSat agrees well with the expected gains and losses due to the change in configuration which required verification of the RASTA calibration.

  5. Constraining the neutrino magnetic dipole moment from white dwarf pulsations

    SciTech Connect (OSTI)

    Crsico, A.H.; Althaus, L.G.; Garca-Berro, E. E-mail: althaus@fcaglp.unlp.edu.ar E-mail: kepler@if.ufrgs.br

    2014-08-01

    Pulsating white dwarf stars can be used as astrophysical laboratories to constrain the properties of weakly interacting particles. Comparing the cooling rates of these stars with the expected values from theoretical models allows us to search for additional sources of cooling due to the emission of axions, neutralinos, or neutrinos with magnetic dipole moment. In this work, we derive an upper bound to the neutrino magnetic dipole moment (?{sub ?}) using an estimate of the rate of period change of the pulsating DB white dwarf star PG 1351+489. We employ state-of-the-art evolutionary and pulsational codes which allow us to perform a detailed asteroseismological period fit based on fully DB white dwarf evolutionary sequences. Plasmon neutrino emission is the dominant cooling mechanism for this class of hot pulsating white dwarfs, and so it is the main contributor to the rate of change of period with time (Pidot) for the DBV class. Thus, the inclusion of an anomalous neutrino emission through a non-vanishing magnetic dipole moment in these sequences notably influences the evolutionary timescales, and also the expected pulsational properties of the DBV stars. By comparing the theoretical Pidot value with the rate of change of period with time of PG 1351+489, we assess the possible existence of additional cooling by neutrinos with magnetic dipole moment. Our models suggest the existence of some additional cooling in this pulsating DB white dwarf, consistent with a non-zero magnetic dipole moment with an upper limit of ?{sub ?}?<10{sup -11}?{sub B}. This bound is somewhat less restrictive than, but still compatible with, other limits inferred from the white dwarf luminosity function or from the color-magnitude diagram of the Globular cluster M5. Further improvements of the measurement of the rate of period change of the dominant pulsation mode of PG 1351+489 will be necessary to confirm our bound.

  6. MetNet: Software to Build and Model the Biogenetic Lattice of Arabidopsis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wurtele, Eve Syrkin; Li, Jie; Diao, Lixia; Zhang, Hailong; Foster, Carol M.; Fatland, Beth; Dickerson, Julie; Brown, Andrew; Cox, Zach; Cook, Dianne; et al

    2003-01-01

    MetNet (http://www.botany.iastate.edu/∼mash/metnetex/metabolicnetex.html) is publicly available software in development for analysis of genome-wide RNA, protein and metabolite profiling data. The software is designed to enable the biologist to visualize, statistically analyse and model a metabolic and regulatory network map of Arabidopsis , combined with gene expression profiling data. It contains a JAVA interface to an interactions database (MetNetDB) containing information on regulatory and metabolic interactions derived from a combination of web databases (TAIR, KEGG, BRENDA) and input from biologists in their area of expertise. FCModeler captures input from MetNetDB in a graphical form. Sub-networks can be identified and interpreted usingmore » simple fuzzy cognitive maps. FCModeler is intended to develop and evaluate hypotheses, and provide a modelling framework for assessing the large amounts of data captured by high-throughput gene expression experiments. FCModeler and MetNetDB are currently being extended to three-dimensional virtual reality display. The MetNet map, together with gene expression data, can be viewed using multivariate graphics tools in GGobi linked with the data analytic tools in R. Users can highlight different parts of the metabolic network and see the relevant expression data highlighted in other data plots. Multi-dimensional expression data can be rotated through different dimensions. Statistical analysis can be computed alongside the visual. MetNet is designed to provide a framework for the formulation of testable hypotheses regarding the function of specific genes, and in the long term provide the basis for identification of metabolic and regulatory networks that control plant composition and development.« less

  7. Acoustic agglomeration of power plant fly ash. Final report

    SciTech Connect (OSTI)

    Reethof, G.; McDaniel, O.H.

    1982-01-01

    The work has shown that acoustic agglomeration at practical acoustic intensities and frequencies is technically and most likely economically viable. The following studies were performed with the listed results: The physics of acoustic agglomeration is complex particularly at the needed high acoustic intensities in the range of 150 to 160 dB and frequencies in the 2500 Hz range. The analytical model which we developed, although not including nonlinear acoustic efforts, agreed with the trends observed. We concentrated our efforts on clarifying the impact of high acoustic intensities on the generation of turbulence. Results from a special set of tests show that although some acoustically generated turbulence of sorts exists in the 150 to 170 dB range with acoustic streaming present, such turbulence will not be a significant factor in acoustic agglomeration compared to the dominant effect of the acoustic velocities at the fundamental frequency and its harmonics. Studies of the robustness of the agglomerated particles using the Anderson Mark III impactor as the source of the shear stresses on the particles show that the agglomerates should be able to withstand the rigors of flow through commercial cyclones without significant break-up. We designed and developed a 700/sup 0/F tubular agglomerator of 8'' internal diameter. The electrically heated system functioned well and provided very encouraging agglomeration results at acoustic levels in the 150 to 160 dB and 2000 to 3000 Hz ranges. We confirmed earlier results that an optimum frequency exists at about 2500 Hz and that larger dust loadings will give better results. Studies of the absorption of acoustic energy by various common gases as a function of temperature and humidity showed the need to pursue such an investigation for flue gas constituents in order to provide necessary data for the design of agglomerators. 65 references, 56 figures, 4 tables.

  8. A 1-V series-array Josephson voltage standard operated at 35 GHz

    SciTech Connect (OSTI)

    Mueller, F.; Koehler, H.; Weber, P.; Bluethner, K.; Meyer, H. )

    1990-11-01

    Josephson voltage standards utilize microwave-induced constant voltage steps in the dc characteristic of Josephson tunnel junctions. This paper describes the design and operation of array circuits with 108 and 2000 junctions connected in series. In contrast with similar realizations, simple {ital Q}-band equipment is used for the microwave supply. The microwave attenuation of 1000 junctions was about 1 dB. The version with 2000 junctions generated Josephson voltages up to 1.2 V when operated at 35 GHz. The stability times of the quantized levels were, under normal laboratory conditions (unshielded room), better than 10 min.

  9. Fabrication of triangular nanobeam waveguide networks in bulk diamond using single-crystal silicon hard masks

    SciTech Connect (OSTI)

    Bayn, I.; Mouradian, S.; Li, L.; Goldstein, J. A.; Schrder, T.; Zheng, J.; Chen, E. H.; Gaathon, O.; Englund, Dirk; Lu, M.; Stein, A.; Ruggiero, C. A.; Salzman, J.; Kalish, R.

    2014-11-24

    A scalable approach for integrated photonic networks in single-crystal diamond using triangular etching of bulk samples is presented. We describe designs of high quality factor (Q?=?2.51??10{sup 6}) photonic crystal cavities with low mode volume (V{sub m}?=?1.062??(?/n){sup 3}), which are connected via waveguides supported by suspension structures with predicted transmission loss of only 0.05?dB. We demonstrate the fabrication of these structures using transferred single-crystal silicon hard masks and angular dry etching, yielding photonic crystal cavities in the visible spectrum with measured quality factors in excess of Q?=?3??10{sup 3}.

  10. Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ciovati, G.; Anlage, Steven M.; Baldwin, C.; Cheng, G.; Flood, R.; Jordan, K.; Kneisel, P.; Morrone, M.; Nemes, G.; Turlington, L.; et al

    2012-03-16

    An apparatus was created to obtain, for the first time, 2D maps of the surface resistance of the inner surface of an operating superconducting radio-frequency niobium cavity by a low-temperature laser scanning microscopy technique. This allows identifying non-uniformities of the surface resistance with a spatial resolution of about one order of magnitude better than with earlier methods. A signal-to-noise ratio of about 10 dB was obtained with 240 mW laser power and 1 Hz modulation frequency. The various components of the apparatus, the experimental procedure and results are discussed in details in this contribution.

  11. Inter-comparison of Computer Codes for TRISO-based Fuel Micro-Modeling and Performance Assessment

    SciTech Connect (OSTI)

    Brian Boer; Chang Keun Jo; Wen Wu; Abderrafi M. Ougouag; Donald McEachren; Francesco Venneri

    2010-10-01

    The Next Generation Nuclear Plant (NGNP), the Deep Burn Pebble Bed Reactor (DB-PBR) and the Deep Burn Prismatic Block Reactor (DB-PMR) are all based on fuels that use TRISO particles as their fundamental constituent. The TRISO particle properties include very high durability in radiation environments, hence the designs reliance on the TRISO to form the principal barrier to radioactive materials release. This durability forms the basis for the selection of this fuel type for applications such as Deep Bun (DB), which require exposures up to four times those expected for light water reactors. It follows that the study and prediction of the durability of TRISO particles must be carried as part of the safety and overall performance characterization of all the designs mentioned above. Such evaluations have been carried out independently by the performers of the DB project using independently developed codes. These codes, PASTA, PISA and COPA, incorporate models for stress analysis on the various layers of the TRISO particle (and of the intervening matrix material for some of them), model for fission products release and migration then accumulation within the SiC layer of the TRISO particle, just next to the layer, models for free oxygen and CO formation and migration to the same location, models for temperature field modeling within the various layers of the TRISO particle and models for the prediction of failure rates. All these models may be either internal to the code or external. This large number of models and the possibility of different constitutive data and model formulations and the possibility of a variety of solution techniques makes it highly unlikely that the model would give identical results in the modeling of identical situations. The purpose of this paper is to present the results of an inter-comparison between the codes and to identify areas of agreement and areas that need reconciliation. The inter-comparison has been carried out by the cooperating institutions using a set of pre-defined TRISO conditions (burnup levels, temperature or power levels, etc.) and the outcome will be tabulated in the full length paper. The areas of agreement will be pointed out and the areas that require further modeling or reconciliation will be shown. In general the agreement between the codes is good within less than one order of magnitude in the prediction of TRISO failure rates.

  12. Note: On-line weak signal detection via adaptive stochastic resonance

    SciTech Connect (OSTI)

    Lu, Siliang; He, Qingbo Kong, Fanrang

    2014-06-15

    We design an instrument with a novel embedded adaptive stochastic resonance (SR) algorithm that consists of a SR module and a digital zero crossing detection module for on-line weak signal detection in digital signal processing applications. The two modules are responsible for noise filtering and adaptive parameter configuration, respectively. The on-line weak signal detection can be stably achieved in seconds. The prototype instrument exhibits an advance of 20 dB averaged signal-to-noise ratio and 5 times averaged adjust R-square as compared to the input noisy signal, in considering different driving frequencies and noise levels.

  13. A tool to detect external cracks from within a metal tube

    SciTech Connect (OSTI)

    Caffey, T.W.H.

    1997-01-01

    A tool using a continuous electromagnetic wave from a transverse magnetic-dipole source with a coaxial electric-dipole receiver is outlined for the detection of external sidewall cracks in boiler tubes. A numerical study of the distribution of the fields shows that the direct transmission from the source to the receiver is reduced from that in free space. Further, if the diameter of the receiver dipole is made sufficiently small, it should be possible to detect cracks with a scattering loss of up to 40dB in thin-walled boiler tubes.

  14. Lower Hybrid to Whistler Wave Conversion

    SciTech Connect (OSTI)

    Winske, Dan

    2012-07-16

    In this presentation we discuss recent work concerning the conversion of whistler waves to lower hybrid waves (as well as the inverse process). These efforts have been motivated by the issue of attenuation of upward propagating whistler waves in the ionosphere generated by VLF transmitters on the ground, i.e., the 'Starks 20 db' problem, which affects the lifetimes of energetic electrons trapped in the geomagnetic field at low magnetic altitude (L). We discuss recent fluid and kinetic plasma simulations as well as ongoing experiments at UCLA to quantify linear and nonlinear mode conversion of lower hybrid to whistler waves.

  15. Sediment Control: Weirs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weirs Sediment Control: Weirs Los Alamos and Pueblo Canyons have a series of defenses-in-depth to keep stormwater on-site. August 1, 2013 Los Alamos Canyon weir slows the flow of stormwater so contaminants settle to the bottom, allowing clearer water to flow to the Rio Grande. Los Alamos Canyon weir slows the flow of stormwater so contaminants settle to the bottom, allowing clearer water to flow to the Rio Grande. RELATED IMAGES http://farm4.staticflickr.com/3693/9623361527_0ef46db516_t.jpg

  16. CUD-55

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CUD-55 / -2 Cl - - - « « » » _ _ DB-1426 Copy No. y^ of Of > Series /f"^ ' m^ 8/9/50 This document consists of S^ pages and J figure^. COLUMBIA UNIVERSITY DEPARTMENT OF PHYSICS Contract AT-30-1-GEN-72 HIGHER RESOLUTION NEUTRON VELOCITY SPECTROMETER MEASUREMENTS OF ENRICHED URANIUM By W. W. Havens, Jr. and L. J. Rainwater, This Document Contains Restricted Data within the i'teaning of the Atcanic Energy Act of 1946 and/or information Affecting the National Defense of the United

  17. PrintRes_PeriodicChartPostCard2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Hg Mercury 35 Br Bromine 43 c echnetium 93 Np Neptunium 94 Pu Plutonium 95 Am Americium 96 Cm Curium 97 Bk Berkelium 98 Cf Californium 99 Es Einsteinium 100 Fm Fermium 101 Md Mendelevium 102 No Nobelium 105 107 106 108 109 111 110 112 Db Dubnium Sg Hs Hassium Bh Seaborgium Bohrium Mt Meitnerium Uun Ununnilium Uuu Unununium 114 116 103 Lr Lawrencium 104 Rf Rutherfordium Uub Ununbium Uuq Ununquadium Uuh Ununhexium T T 17 Cl Chlorine 18 Ar Argon 1 H Hydrogen 86 Rn Radon 10 Ne Neon 2 He Helium 9 O

  18. Research Highlight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Comparison of Mixed-layer Heights from Airborne HSRL and WRF-Chem During CARES Download a printable PDF Submitter: Scarino, A. J., Science Systems and Applications, Inc. Area of Research: Aerosol Properties Working Group(s): Aerosol Life Cycle Journal Reference: Scarino AJ, MD Obland, JD Fast, SP Burton, RA Ferrare, CA Hostetler, LK Berg, B Lefer, C Haman, JW Hair, RR Rogers, C Butler, AL Cook, and DB Harper. 2014. "Comparison of mixed layer heights from airborne high spectral resolution

  19. A 75 MW S-Band Klystron

    SciTech Connect (OSTI)

    Ferguson, Patrick; Read, Michael; Ives, Robert Lawrence; Marsden, David

    2013-12-16

    This program performed computational and preliminary mechanical design for a klystron producing 75 MW at 2.856 GHz using periodic permanent magnet (PPM) focusing. The performance specifications achieved were those for the Matter-Radiation Interactions in the Extremes (MaRIE) project at Los Alamos National Laboratory. The klystron is designed to provide 10 microsecond pulses at 60 Hz with 56 dB gain. The PPM-Focusing eliminates requirements for solenoids and their associated power supplies, cooling systems, interlocks, control and diagnostic instrumentation, and maintenance. The represents a significant in both acquisition and operating costs. It also increases reliability by eliminating many potential failure modes.

  20. Ultrasonic transducer

    DOE Patents [OSTI]

    Taylor, Steven C.; Kraft, Nancy C.

    2007-03-13

    An ultrasonic transducer having an effective center frequency of about 42 MHz; a bandwidth of greater than 85% at 6 dB; a spherical focus of at least 0.5 inches in water; an F4 lens; a resolution sufficient to be able to detect and separate a 0.005 inch flat-bottomed hole at 0.005 inches below surface; and a beam size of approximately 0.006–0.008 inches measured off a 11/2 mm ball in water at the transducer's focal point.

  1. Final report for DOE Award # DE- SC0010039*: Carbon dynamics of forest recovery under a changing climate: Forcings, feedbacks, and implications for earth system modeling

    SciTech Connect (OSTI)

    Anderson-Teixeira, Kristina J.; DeLucia, Evan H.; Duval, Benjamin D.

    2015-10-29

    To advance understanding of C dynamics of forests globally, we compiled a new database, the Forest C database (ForC-db), which contains data on ground-based measurements of ecosystem-level C stocks and annual fluxes along with disturbance history. This database currently contains 18,791 records from 2009 sites, making it the largest and most comprehensive database of C stocks and flows in forest ecosystems globally. The tropical component of the database will be published in conjunction with a manuscript that is currently under review (Anderson-Teixeira et al., in review). Database development continues, and we hope to maintain a dynamic instance of the entire (global) database.

  2. Racetrack resonator as a loss measurement platform for photonic components

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jones, Adam M.; Univ. of Arizona, Tucson, AZ; DeRose, Christopher T.; Lentine, Anthony L.; Starbuck, Andrew; Pomerene, Andrew T. S.; Norwood, Robert A.

    2015-10-27

    This work represents the first complete analysis of the use of a racetrack resonator to measure the insertion loss of efficient, compact photonic components. Beginning with an in-depth analysis of potential error sources and a discussion of the calibration procedure, the technique is used to estimate the insertion loss of waveguide width tapers of varying geometry with a resulting 95% confidence interval of 0.007 dB. Furthermore, the work concludes with a performance comparison of the analyzed tapers with results presented for four taper profiles and three taper lengths.

  3. Note: Readout of a micromechanical magnetometer for the ITER fusion reactor

    SciTech Connect (OSTI)

    Rimminen, H.; Kyynaeraeinen, J.

    2013-05-15

    We present readout instrumentation for a MEMS magnetometer, placed 30 m away from the MEMS element. This is particularly useful when sensing is performed in high-radiation environment, where the semiconductors in the readout cannot survive. High bandwidth transimpedance amplifiers are used to cancel the cable capacitances of several nanofarads. A frequency doubling readout scheme is used for crosstalk elimination. Signal-to-noise ratio in the range of 60 dB was achieved and with sub-percent nonlinearity. The presented instrument is intended for the steady-state magnetic field measurements in the ITER fusion reactor.

  4. Use of an Injection Locked Magnetron to Drive a Superconducting RF Cavity

    SciTech Connect (OSTI)

    Haipeng Wang, Robert Rimmer, G. Davis, Imran Tahir, Amos Dexter, Greame Burt, Richard Carter

    2010-05-01

    The use of an injection locked CW magnetron to drive a 2.45 GHz superconducting RF cavity has been successfully demonstrated. With a locking power less than -27 dB with respect to the output and with a phase control system acting on the locking signal, cavity phase was accurately controlled for hours at a time without loss of lock whilst suppressing microphonics. The phase control accuracy achieved was 0.8 deg. r.m.s. The main contributing disturbance limiting ultimate phase control was power supply ripple from the low specification switch mode power supply used for the experiment.

  5. Local structures of copper-doped ZnO films (Journal Article) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Local structures of copper-doped ZnO films Citation Details In-Document Search Title: Local structures of copper-doped ZnO films Authors: Ma, Q. ; Buchholz, D.B. ; Chang, R.P.H. [1] + Show Author Affiliations (NWU) Publication Date: 2015-02-19 OSTI Identifier: 1171223 Resource Type: Journal Article Resource Relation: Journal Name: Phys. Rev. B; Journal Volume: 78; Journal Issue: (21) ; 12, 2008 Research Org: Advanced Photon Source (APS), Argonne National Laboratory (ANL), Argonne, IL

  6. Study Finds DOE-Funded Research in Energy Storage Provides a Vital Foundation for Success of Today's Hybrid and Electric Vehicles

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    r ams Number of Citations Office of Planning, Budget and Analysis U.S. Department of Energy * Office of Energy Efficiency and Renewable Energy May 2 0 0 9 � EERERe eS d y B - De mo at gRe sAc h i db y EERE e v e t l s u i n t n sr if re t u i v t t r o s p e c Study Finds DOE-funded Research in Energy Storage Provides a Vital Foundation for Success of Today's Hybrid & Electric Vehicles ‹ Hybrid and electric vehicles are showing great developmental and commercial market progress. ‹

  7. A compact design for the Josephson mixer: The lumped element circuit

    SciTech Connect (OSTI)

    Pillet, J.-D.; Flurin, E.; Mallet, F. Huard, B.

    2015-06-01

    We present a compact and efficient design in terms of gain, bandwidth, and dynamical range for the Josephson mixer, the superconducting circuit performing three-wave mixing at microwave frequencies. In an all lumped-element based circuit with galvanically coupled ports, we demonstrate nondegenerate amplification for microwave signals over a bandwidth up to 50?MHz for a power gain of 20?dB. The quantum efficiency of the mixer is shown to be about 70%, and its saturation power reaches ?112 dBm.

  8. November 8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 November 8 Attending: Eric Iwona JeffP JeffA Mike Craig Utilization: Cluster is full as usual recently with over 1800 cores in service. Outages: Nothing major. Icecube db connection got blocked by NERSC security and was cleared. Upcoming Downtimes: Dec. 13 there is an NGF downtime so PDSF will have a maintenance day to upgrade firmware on some servers, upgrade SGE and do miscellaneous hardware work. Procurements: All new hardware has been installed and there are currently no procurements in

  9. February 15

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 February 15 Attending: Eric and Jay from NERSC and users Andrei, Marjorie and Jeff P. Cluster Utilization: Filled to capacity Atlas plans: many students finishing and new ones are starting so there has been a lull in jobs. Andrei is using cvmfs. It is working and should be put on all nodes including the debug node. Discussed squid for db access on the hill - should it be moved to PDSF? Not critical for now... Upcoming downtimes: eliza4 maintenance Procurements/new hardware: Got the new eliza5

  10. February 16

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16 February 16 PDSF Users Meeting 2/16/10 Cluster status: Utilization has been light, mostly icecube and STAR. Outages: None Upcoming downtimes: None, but PDSF will be short-staffed for a while with Iwona taking leave and Jay and Eric taking some vacation time. New hardware: ATLAS storave and ALICE nodes in progress, still working on some details related to ALICE storage. New db nodes finally arrived today. Retirement plan: Jay sent out a document a couple weeks ago - next week we will start

  11. Diapositive 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ganil-spiral2.eu Super Heavy Nuclei International Symposium Texas A & M University, College Station TX, USA March 31 - April 02, 2015 Christelle Stodel (GANIL) Study of very Heavy Nuclei at GANIL-SPIRAL2 facilities * SPIRAL 2 Facility  LINAG  NFS   Physics cases  Technical description  Targets issues * GANIL  decay spectroscopy of 257 Db  AGATA campaign * Conclusions and Perspectives Study of very Heavy Nuclei at GANIL-SPIRAL2 facilities * SPIRAL 2 Facility  LINAG

  12. January 4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 January 4 PDSF users meeting 1/4/11 Attending: Eric, Katie and Jay from NERSC and users Jeff P., Thomas, Art and possibly an an unknown person on the phone (?). Cluster Status/Utilization: Quite full over the break and stable. Only issue was that at one point there were 26k jobs running or pending but that didn't cause any major problems. Outages: None. Upcoming downtimes: Need to do some work on rack 22 - clean up and rearrange some things. This will affect STAR db and will take ~5 hours.

  13. Compressor surge counter

    DOE Patents [OSTI]

    Castleberry, Kimberly N. (Harriman, TN)

    1983-01-01

    A surge counter for a rotating compressor is provided which detects surging by monitoring the vibration signal from an accelerometer mounted on the shaft bearing of the compressor. The circuit detects a rapid increase in the amplitude envelope of the vibration signal, e.g., 4 dB or greater in less than one second, which is associated with a surge onset and increments a counter. The circuit is rendered non-responsive for a period of about 5 seconds following the detection which corresponds to the duration of the surge condition. This prevents multiple registration of counts during the surge period due to rapid swings in vibration amplitude during the period.

  14. NREL: Energy Analysis - Jay Huggins

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jay Huggins Photo of Jay Huggins Jay Huggins is a member of the Data Analysis and Visualization Group in the Strategic Energy Analysis Center. Web Developer On staff since October 2011 Phone number: 303-275-4349 E-mail: jay.huggins@nrel.gov Areas of expertise OpenEI CKAN Multi-language coder (PHP, Python, JavaScript, Perl) MySQL, MongoDB, PostgreSQL, Apache, Solr, Nagios Primary research interests LAMP web development and data transformation Big Data Optimization and automation Human-powered

  15. The MicroBooNE Experiment - At Work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MicroBooNE at Work At Work Now The Getting Started Page holds links to help find your way around Fermilab services and prepare for working on the experiment. The MicroBooNE Contact List contains contact information for collaboration members. The Working Groups Page is a portal to these sub-sites. The Operations Page is a portal to the running detector. The Meetings Page lists the current regular meeting time slots, and also lists the collaboration meeting dates with links to the DocDB for past

  16. The MicroBooNE Experiment - Conference Talks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Talks and Posters Once you have given a MicroBooNE presentation, please send your talk to Ben Carls so it can be archived. If you have written proceedings to accompany your talk, please upload them to the MicroBooNE DocDB and send the document number to Ben. Also, remember that conference proceedings are required by Fermilab policy to be submitted to the Fermilab Technical Publications archive. Instructions for doing that appear here. Click here for Future talks. Conference Presentations Speaker

  17. A Voltage Controlled Oscillator for a Phase-Locked Loop Frequency Synthesizer in a Silicon-on-Sapphire Process

    SciTech Connect (OSTI)

    Garrison, Sean

    2009-05-21

    Engineers from a government-owned engineering and manufacturing facility were contracted by government-owned research laboratory to design and build an S-band telemetry transmitter using Radio Frequency Integrated Circuit (RFIC) technology packaged in a Low-Temperature Co-fired Ceramic (LTCC) Multi-Chip Module. The integrated circuit technology chosen for the Phase-Locked Loop Frequency Synthesizer portion of the telemetry transmitter was a 0.25 um CMOS process that utilizes a sapphire substrate and is fabricated by Peregrine Semiconductor corporation. This thesis work details the design of the Voltage Controlled Oscillator (VCO) portion of the PLL frequency synthesizer and constitutes an fully integrated VCO core circuit and a high-isolation buffer amplifier. The high-isolation buffer amplifier was designed to provide 16 dB of gain for 2200-3495 MHz as well as 60 dB of isolation for the oscillator core to provide immunity to frequency pulling due to RF load mismatch. Actual measurements of the amplifier gain and isolation showed the gain was approximately 5 dB lower than the simulated gain when all bond-wire and test substrate parasitics were taken into account. The isolation measurements were shown to be 28 dB at the high end of the frequency band but the measurement was more than likely compromised due to the aforementioned bond-wire and test substrate parasitics. The S-band oscillator discussed in this work was designed to operate over a frequency range of 2200 to 2300 MHz with a minimum output power of 0 dBm with a phase-noise of -92 dBc/Hz at a 100 kHz offset from the carrier. The tuning range was measured to be from 2215 MHz to 2330 MHz with a minimum output power of -7 dBm over the measured frequency range. A phase-noise of -90 dBc was measured at a 100 kHz offset from the carrier.

  18. Mission Support Contract Section J Contract No. DE-AC06-09RL14728

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-7-1 ATTACHMENT J-7 SMALL DISADVANTAGED BUSINESS PARTICIPATION PROGRAM TARGETS Mission Support Contract Section J Contract No. DE-AC06-09RL14728 J-7-2 SMALL DISADVANTAGED BUSINESS PARTICIPATION PROGRAM TARGETS A. Mission Support Alliance, LLC NAICS Co d e De s c rip tio n o f NAICS S u b s e c to rs S DB Do lla rs P e rc e n ta g e * 531312 Nonresidential Property Managers $22,924,301 0.7 541614 Process, Physical Distribution and Logistics Consulting Services $22,953,821 0.8 541690 Scientific

  19. Microsoft PowerPoint - CSWPI_PowerpointTemplate3_v2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements for the Centre for Simulation of Wave-Plasma Interactions (CSWPI) Paul T. Bonoli Plasma Science and Fusion Center - MIT NERSC FES Requirements for 2017 March 19-20, 2013 Rockville, MD The SciDAC Center for Simulation of Wave - Plasma Interactions (CSWPI) L.A. Berry, D.B. Batchelor, D. L. Green, E.F. Jaeger, E. D`Azevedo C.K. Phillips, E. Valeo N. Bertelli, H. Qin P.T. Bonoli, J.C. Wright, J. P. Lee, A. Ram R.W. Harvey, Y. Petrov A.P. Smirnov N.M. Ershov M. Choi M. Brambilla R.

  20. Buildings Interoperability Landscape … DRAFT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PNNL-24089 Buildings Interoperability Landscape - DRAFT February 2015 DB Hardin CD Corbin EG Stephan SE Widergren W Wang Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor Battelle Memorial Institute, nor any of their employees, makes any warranty, ex1>ress or implied, or assumes any legal

  1. Controlling the width of a femtosecond continuum generated in a small-diameter fibre

    SciTech Connect (OSTI)

    Kobtsev, Sergey M; Kukarin, S V; Fateev, N V

    2002-01-31

    The control of the width of a continuum generated in a tapered germanium-doped silica fibre with the waist diameter of {approx}3 {mu}m is experimentally demonstrated for the first time. The width of the continuum was controlled by varying the wavelength of chirped femtosecond pump pulses near the zero-point of the group velocity dispersion of the fibre. The width of the continuum at the -20-dB level was varied from 98 to 790 nm by tuning the central wavelength of 80-fs, 0.6-nJ input pulses from 789 to 847 nm. (control of laser radiation parameters)

  2. Sodium fast reactor gaps analysis of computer codes and models for accident analysis and reactor safety.

    SciTech Connect (OSTI)

    Carbajo, Juan; Jeong, Hae-Yong; Wigeland, Roald; Corradini, Michael; Schmidt, Rodney Cannon; Thomas, Justin; Wei, Tom; Sofu, Tanju; Ludewig, Hans; Tobita, Yoshiharu; Ohshima, Hiroyuki; Serre, Frederic

    2011-06-01

    This report summarizes the results of an expert-opinion elicitation activity designed to qualitatively assess the status and capabilities of currently available computer codes and models for accident analysis and reactor safety calculations of advanced sodium fast reactors, and identify important gaps. The twelve-member panel consisted of representatives from five U.S. National Laboratories (SNL, ANL, INL, ORNL, and BNL), the University of Wisconsin, the KAERI, the JAEA, and the CEA. The major portion of this elicitation activity occurred during a two-day meeting held on Aug. 10-11, 2010 at Argonne National Laboratory. There were two primary objectives of this work: (1) Identify computer codes currently available for SFR accident analysis and reactor safety calculations; and (2) Assess the status and capability of current US computer codes to adequately model the required accident scenarios and associated phenomena, and identify important gaps. During the review, panel members identified over 60 computer codes that are currently available in the international community to perform different aspects of SFR safety analysis for various event scenarios and accident categories. A brief description of each of these codes together with references (when available) is provided. An adaptation of the Predictive Capability Maturity Model (PCMM) for computational modeling and simulation is described for use in this work. The panel's assessment of the available US codes is presented in the form of nine tables, organized into groups of three for each of three risk categories considered: anticipated operational occurrences (AOOs), design basis accidents (DBA), and beyond design basis accidents (BDBA). A set of summary conclusions are drawn from the results obtained. At the highest level, the panel judged that current US code capabilities are adequate for licensing given reasonable margins, but expressed concern that US code development activities had stagnated and that the experienced user-base and the experimental validation base was decaying away quickly.

  3. Mechanical-biological waste treatment and the associated occupational hygiene in Finland

    SciTech Connect (OSTI)

    Tolvanen, Outi K. . E-mail: outolvan@bytl.jyu.fi; Haenninen, Kari I.

    2006-07-01

    A special feature of waste management in Finland has been the emphasis on the source separation of kitchen biowaste (catering waste); more than two-thirds of the Finnish population participates in this separation. Source-separated biowaste is usually treated by composting. The biowaste of about 5% of the population is handled by mechanical-biological treatment. A waste treatment plant at Mustasaari is the only plant in Finland using digestion for kitchen biowaste. For the protection of their employees, the plant owners commissioned a study on environmental factors and occupational hygiene in the plant area. During 1998-2000 the concentrations of dust, microbes and endotoxins and noise levels were investigated to identify possible problems at the plant. Three different work areas were investigated: the pre-processing and crushing hall, the bioreactor hall and the drying hall. Employees were asked about work-related health problems. Some problems with occupational hygiene were identified: concentrations of microbes and endotoxins may increase to levels harmful to health during waste crushing and in the bioreactor hall. Because employees complained of symptoms such as dry cough and rash or itching appearing once or twice a month, it is advisable to use respirator masks (class P3) during dusty working phases. The noise level in the drying hall exceeded the Finnish threshold value of 85 dBA. Qualitatively harmful factors for the health of employees are similar in all closed waste treatment plants in Finland. Quantitatively, however, the situation at the Mustasaari treatment plant is better than at some Finnish dry waste treatment plants. Therefore is reasonable to conclude that mechanical sorting, which produces a dry waste fraction for combustion and a biowaste fraction for anaerobic treatment, is in terms of occupational hygiene better for employees than combined aerobic treatment and dry waste treatment.

  4. MODULAR AND FULL SIZE SIMPLIFIED BOILING WATER REACTOR DESIGN WITH FULLY PASSIVE SAFETY SYSTEMS

    SciTech Connect (OSTI)

    M. Ishii; S. T. Revankar; T. Downar; Y. Xu, H. J. Yoon; D. Tinkler; U. S. Rohatgi

    2003-06-16

    OAK B204 The overall goal of this three-year research project was to develop a new scientific design of a compact modular 200 MWe and a full size 1200 MWe simplified boiling water reactors (SBWR). Specific objectives of this research were: (1) to perform scientific designs of the core neutronics and core thermal-hydraulics for a small capacity and full size simplified boiling water reactor, (2) to develop a passive safety system design, (3) improve and validate safety analysis code, (4) demonstrate experimentally and analytically all design functions of the safety systems for the design basis accidents (DBA) and (5) to develop the final scientific design of both SBWR systems, 200 MWe (SBWR-200) and 1200 MWe (SBWR-1200). The SBWR combines the advantages of design simplicity and completely passive safety systems. These advantages fit well within the objectives of NERI and the Department of Energy's focus on the development of Generation III and IV nuclear power. The 3-year research program was structured around seven tasks. Task 1 was to perform the preliminary thermal-hydraulic design. Task 2 was to perform the core neutronic design analysis. Task 3 was to perform a detailed scaling study and obtain corresponding PUMA conditions from an integral test. Task 4 was to perform integral tests and code evaluation for the DBA. Task 5 was to perform a safety analysis for the DBA. Task 6 was to perform a BWR stability analysis. Task 7 was to perform a final scientific design of the compact modular SBWR-200 and the full size SBWR-1200. A no cost extension for the third year was requested and the request was granted and all the project tasks were completed by April 2003. The design activities in tasks 1, 2, and 3 were completed as planned. The existing thermal-hydraulic information, core physics, and fuel lattice information was collected on the existing design of the simplified boiling water reactor. The thermal-hydraulic design were developed. Based on a detailed integral system scaling analysis, design parameters were obtained and designs of the compact modular 200 MWe SBWR and the full size 1200 MWe SBWR were developed. These reactors are provided with passive safety systems. A new passive vacuum breaker check valve was designed to replace the mechanical vacuum beaker check valve. The new vacuum breaker check valve was based on a hydrostatic head, and was fail safe. The performance of this new valve was evaluated both by the thermal-hydraulic code RELAP5 and by the experiments in a scaled SBWR facility, PUMA. In the core neutronic design a core depletion model was implemented to PARCS code. A lattice design for the SBWR fuel assemblies was performed. Design improvements were made to the neutronics/thermal-hydraulics models of SBWR-200 and SBWR-1200, and design analyses of these reactors were performed. The design base accident analysis and evaluation of all the passive safety systems were completed as scheduled in tasks 4 and 5. Initial conditions for the small break loss of coolant accidents (LOCA) and large break LOCA using REALP5 code were obtained. Small and large break LOCA tests were performed and the data was analyzed. An anticipated transient with scram was simulated using the RELAP5 code for SBWR-200. The transient considered was an accidental closure of the main steam isolation valve (MSIV), which was considered to be the most significant transient. The evaluation of the RELAP5 code against experimental data for SBWR-1200 was completed. In task 6, the instability analysis for the three SBWR designs (SBWR-1200, SBWR-600 and SBWR-200) were simulated for start-up transients and the results were similar. Neither the geysering instability, nor the loop type instability was predicted by RAMONA-4B in the startup simulation following the recommended procedure by GE. The density wave oscillation was not observed at all because the power level used in the simulation was not high enough. A study was made of the potential instabilities by imposing an unrealistically high power ramp in a short time period, as suggested by GE. RAMON

  5. Heterogeneous microring and Mach-Zehnder modulators based on lithium niobate and chalcogenide glasses on silicon

    SciTech Connect (OSTI)

    Rao, Ashutosh; Patil, Aniket; Chiles, Jeff; Malinowski, Marcin; Novak, Spencer; Richardson, Kathleen; Rabiei, Payam; Fathpour, Sasan

    2015-08-20

    In this study, thin films of lithium niobate are wafer bonded onto silicon substrates and rib-loaded with a chalcogenide glass, Ge23Sb7S70, to demonstrate strongly confined single-mode submicron waveguides, microring modulators, and Mach-Zehnder modulators in the telecom C band. The 200 ?m radii microring modulators present 1.2 dB/cm waveguide propagation loss, 1.2 105 quality factor, 0.4 GHz/V tuning rate, and 13 dB extinction ratio. The 6 mm long Mach-Zehnder modulators have a half-wave voltage-length product of 3.8 V.cm and an extinction ratio of 15 dB. The demonstrated work is a key step towards enabling wafer scale dense on-chip integration of high performance lithium niobate electro-optical devices on silicon for short reach optical interconnects and higher order advanced modulation schemes.

  6. Rotational coherent anti-Stokes Raman spectroscopy (CARS) applied to thermometry in high-pressure hydrocarbon flames

    SciTech Connect (OSTI)

    Vestin, Fredrik; Sedarsky, David; Collin, Robert; Alden, Marcus; Linne, Mark; Bengtsson, Per-Erik

    2008-07-15

    Dual-broadband rotational coherent anti-Stokes Raman spectroscopy (DB-RCARS) has been investigated for thermometry under high-pressure and high-temperature conditions, in the product gas of fuel-lean hydrocarbon flames up to 1 MPa. Initial calibration measurements made in nitrogen, oxygen, and air, at pressures up to 1.55 MPa and temperatures up to 1800 K, showed good agreement between experimental and theoretical spectra. In the high-pressure flames, high-quality single-shot spectra were recorded in which nitrogen lines dominated, and peaks from CO{sub 2} and O{sub 2} were also visible. A spectral model including the species N{sub 2}, CO{sub 2}, and O{sub 2}, as well as the best available Raman linewidth models for flame thermometry, were used to evaluate the experimental spectra. Experimental problems as well as considerations related to the spectral evaluation are discussed. This work demonstrates the significant potential of DB-RCARS thermometry for applications in high-pressure and high-temperature environments. (author)

  7. Test results and design analysis for a thermoacoustic underwater projector

    SciTech Connect (OSTI)

    Ward, W.C. ); Gabrielson, T.B. )

    1994-05-01

    An experimental thermoacoustic projector (a heat-driven sound source without moving parts) produced source levels near 190 dB at 120 Hz during recent tests at the Navy's Seneca Lake facility. These data were taken near 60 m depth; in thermoacoustic projectors, the source level increases linearly with depth. The device is composed of two coupled vertical tubes. The upper driver tube is filled with helium and contains a thermoacoustic stack with hot and cold heat exchangers. The lower tube is an impedance matching device filled with water up to a variable level. The tube opening is necessarily small compared to wavelength. For a radiation impedance with such a small resistive component, the test device demonstrated a resonant mode ambiguity before reaching the optimum tuning point. This effect reduced the maximum source level by 3--5 dB below the design level, and had a similar effect on the overall efficiency. This presentation will give an overview of the experimental results and introduce design modifications to overcome the observed limitations and reduce the size of the projector as well.

  8. Study of transmission line attenuation in broad band millimeter wave frequency range

    SciTech Connect (OSTI)

    Pandya, Hitesh Kumar B.; Austin, M. E.; Ellis, R. F.

    2013-10-15

    Broad band millimeter wave transmission lines are used in fusion plasma diagnostics such as electron cyclotron emission (ECE), electron cyclotron absorption, reflectometry and interferometry systems. In particular, the ECE diagnostic for ITER will require efficient transmission over an ultra wide band, 100 to 1000 GHz. A circular corrugated waveguide transmission line is a prospective candidate to transmit such wide band with low attenuation. To evaluate this system, experiments of transmission line attenuation were performed and compared with theoretical loss calculations. A millimeter wave Michelson interferometer and a liquid nitrogen black body source are used to perform all the experiments. Atmospheric water vapor lines and continuum absorption within this band are reported. Ohmic attenuation in corrugated waveguide is very low; however, there is Bragg scattering and higher order mode conversion that can cause significant attenuation in this transmission line. The attenuation due to miter bends, gaps, joints, and curvature are estimated. The measured attenuation of 15 m length with seven miter bends and eighteen joints is 1 dB at low frequency (300 GHz) and 10 dB at high frequency (900 GHz), respectively.

  9. WATER FRACTIONS IN EXTRASOLAR PLANETESIMALS

    SciTech Connect (OSTI)

    Jura, M.; Xu, S., E-mail: jura@astro.ucla.edu, E-mail: sxu@astro.ucla.edu [Department of Physics and Astronomy, University of California Los Angeles, Los Angeles, CA 90095-1562 (United States)

    2012-01-15

    With the goal of using externally polluted white dwarfs to investigate the water fractions of extrasolar planetesimals, we assemble from the literature a sample that we estimate to be more than 60% complete of DB white dwarfs warmer than 13,000 K, more luminous than 3 Multiplication-Sign 10{sup -3} L{sub Sun }, and within 80 pc of the Sun. When considering all the stars together, we find that the summed mass accretion rate of heavy atoms exceeds that of hydrogen by over a factor of 1000. If so, this sub-population of extrasolar asteroids treated as an ensemble has little water and is at least a factor of 20 drier than CI chondrites, the most primitive meteorites. Furthermore, while an apparent 'excess' of oxygen in a single DB can be interpreted as evidence that the accreted material originated in a water-rich parent body, we show that at least in some cases, there can be sufficient uncertainties in the time history of the accretion rate that such an argument may be ambiguous. Regardless of the difficulty associated with interpreting the results from an individual object, our analysis of the population of polluted DBs provides indirect observational support for the theoretical view that a snow line is important in disks where rocky planetesimals form.

  10. Hybrid metasurface for ultra-broadband terahertz modulation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Heyes, Jane E.; Withayachumnankul, Withawat; Grady, Nathaniel K.; Chowdhury, Dibakar Roy; Azad, Abul K.; Chen, Hou-Tong

    2014-11-05

    We demonstrate an ultra-broadband free-space terahertz modulator based on a semiconductor-integrated metasurface. The modulator is made of a planar array of metal cut-wires on a silicon-on-sapphire substrate, where the silicon layer functions as photoconductive switches. Without external excitation, the cut-wire array exhibits a Lorentzian resonant response with a transmission passband spanning dc up to the fundamental dipole resonance above 2 THz. Under photoexcitation with 1.55 eV near-infrared light, the silicon regions in the cut-wire gaps become highly conductive, causing a transition of the resonant metasurface to a wire grating with a Drude response. In effect, the low-frequency passband below 2more »THz evolves into a stopband for the incident terahertz waves. Experimental validations confirm a bandwidth of at least 100%, spanning 0.5 to 1.5 THz with -10 dB modulation depth. This modulation depth is far superior to -5 dB achievable from a plain silicon-on-sapphire substrate with effectively 25 times higher pumping energy. The proposed concept of ultra-broadband metasurface modulator can be readily extended to electrically controlled terahertz wave modulation.« less

  11. A low phase noise microwave frequency synthesis for a high-performance cesium vapor cell atomic clock

    SciTech Connect (OSTI)

    Franois, B.; Boudot, R.; Calosso, C. E.; Danet, J. M.

    2014-09-15

    We report the development, absolute phase noise, and residual phase noise characterization of a 9.192?GHz microwave frequency synthesis chain devoted to be used as a local oscillator in a high-performance cesium vapor cell atomic clock based on coherent population trapping (CPT). It is based on frequency multiplication of an ultra-low phase noise 100 MHz oven-controlled quartz crystal oscillator using a nonlinear transmission line-based chain. Absolute phase noise performances of the 9.192?GHz output signal are measured to be ?42, ?100, ?117 dB?rad{sup 2}/Hz and ?129 dB?rad{sup 2}/Hz at 1 Hz, 100 Hz, 1 kHz, and 10 kHz offset frequencies, respectively. Compared to current results obtained in a state-of-the-art CPT-based frequency standard developed at LNE-SYRTE, this represents an improvement of 8 dB and 10 dB at f = 166 Hz and f = 10 kHz, respectively. With such performances, the expected Dick effect contribution to the atomic clock short term frequency stability is reported at a level of 6.2 10{sup ?14} at 1 s integration time, that is a factor 3 higher than the atomic clock shot noise limit. Main limitations are pointed out.

  12. Single nucleotide polymorphism in transcriptional regulatory regions and expression of environmentally responsive genes

    SciTech Connect (OSTI)

    Wang, Xuting; Tomso, Daniel J.; Liu Xuemei; Bell, Douglas A. . E-mail: BELL1@niehs.nih.gov

    2005-09-01

    Single nucleotide polymorphisms (SNPs) in the human genome are DNA sequence variations that can alter an individual's response to environmental exposure. SNPs in gene coding regions can lead to changes in the biological properties of the encoded protein. In contrast, SNPs in non-coding gene regulatory regions may affect gene expression levels in an allele-specific manner, and these functional polymorphisms represent an important but relatively unexplored class of genetic variation. The main challenge in analyzing these SNPs is a lack of robust computational and experimental methods. Here, we first outline mechanisms by which genetic variation can impact gene regulation, and review recent findings in this area; then, we describe a methodology for bioinformatic discovery and functional analysis of regulatory SNPs in cis-regulatory regions using the assembled human genome sequence and databases on sequence polymorphism and gene expression. Our method integrates SNP and gene databases and uses a set of computer programs that allow us to: (1) select SNPs, from among the >9 million human SNPs in the NCBI dbSNP database, that are similar to cis-regulatory element (RE) consensus sequences; (2) map the selected dbSNP entries to the human genome assembly in order to identify polymorphic REs near gene start sites; (3) prioritize the candidate polymorphic RE containing genes by searching the existing genotype and gene expression data sets. The applicability of this system has been demonstrated through studies on p53 responsive elements and is being extended to additional pathways and environmentally responsive genes.

  13. Storage of comminuted forest biomass and its effect on fuel quality.

    SciTech Connect (OSTI)

    Afzal, M; Bedane, A.H.; Sokhansanj, Shahabaddine; Mahmood, W.

    2009-11-01

    White birch was stored in the form of bundles, wood chips and loose slash for a period of one year to examine the change in biomass fuel properties. The samples were collected at regular quarterly intervals to measure the moisture content, CNS content, ash content and calorific value. Data loggers were also placed into the woody biomass to measure the temperature change inside the piles. After the first quarter of the storage period and continuing into the next three months of storage, the moisture content showed most significant change. The moisture content of the biomass bundles increased from 29 % to above 80 % (db). The moisture content of the pile of wood chips covered with a tarp decreased from 51% to 26% and showed a continuous decline in moisture content to the end of storage period. However, the moisture content of uncovered wood chip piles were observed to continuously increase throughout the storage period resulting in more than double in magnitude from 59% to 160% (db). The dry matter loss was higher in wood chip piles (8-27%) than in bundles (~3%). Among the other properties, there was slightly higher loss of calorific value in wood chips (~1.6%) as compared to bundles (~0.7%) at the end of one year. Other changes in woody biomass properties were also discussed. The proposed two-dimensional mathematical model predicted the moisture content and temperature profile in the woody biomass pile closely to the experimental data.

  14. Performance of a narrow band microwave filter implemented in thin-film YBa sub 2 Cu sub 3 O sub 7 minus. delta. with ohmic contacts

    SciTech Connect (OSTI)

    Kalokitis, D.; Fathy, A.; Pendrick, V.; Belohoubek, E. ); Findikoglu, A.; Inam, A.; Xi, X.X.; Venkatesan, T. ); Barner, J.B. )

    1991-02-04

    Using {ital in} {ital situ} deposited thin-film Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7{minus}{delta}} on LaAlO{sub 3} substrates, we have developed a pseudo-interdigital three-pole stripline filter with a minimum passband loss under 3.5 dB at 9.5 GHz and 77 K. The passband is very narrow, having a bandwidth of only 50 MHz (0.5%). The filter occupies a volume of less than 0.1 cm{sup 3}. An equivalent copper filter produced a loss of 18.5 and 28 dB at 77 and 300 K, respectively. The input and output coupling is achieved by {ital ex} {ital situ} sputtered Au thin-film contacts defined on the Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7{minus}{delta}} by a lift-off technology and ultrasonically bonded to hermetic K connectors. Some of the major concerns in the realization of narrow band filters such as air gaps between high dielectric constant substrates and uniformity of the substrate's dielectric constant are addressed.

  15. Performance of the upgraded NSLS beam position monitors

    SciTech Connect (OSTI)

    Nawrocky, R.J.; Keane, J.

    1997-07-01

    The design and initial performance of the original NSLS beam position monitor were described by J. Bittner and R. Biscardi in 1989. The receiver, which processes signals from four button type pick-up electrodes by time-division multiplexing, operates at the third harmonic of the ring rf frequency (158.66 MHz). It has an output bandwidth of about 2 kHz and a dynamic signal range of approximately 36 dB. A total of 92 receivers have been installed in the NSLS X-ray and VUV storage rings for orbit monitoring and for real time feedback. As part of a continuous effort to improve the NSLS storage ring performance, the BPMs as well as other instrumentation systems have also been undergoing upgrades over the past two years to improve their performance. In the BPM, the front end has been modified to prevent saturation of the rf multiplexing switch, the detector operating point was changed to improve output signal linearity, the dynamic range was increased to over 60 dB, and the gain calibration was standardized to 0.5 volts/mm (i.e. 2 {micro}m/mV). This paper describes the BPM modifications and presents some performance data and measurements on stored beam.

  16. Electrical and Optical Gain Lever Effects in InGaAs Double Quantum Well Diode Lasers

    SciTech Connect (OSTI)

    Pocha, M D; Goddard, L L; Bond, T C; Nikolic, R J; Vernon, S P; Kallman, J S; Behymer, E M

    2007-01-03

    In multisection laser diodes, the amplitude or frequency modulation (AM or FM) efficiency can be improved using the gain lever effect. To study gain lever, InGaAs double quantum well (DQW) edge emitting lasers have been fabricated with integrated passive waveguides and dual sections providing a range of split ratios from 1:1 to 9:1. Both the electrical and the optical gain lever have been examined. An electrical gain lever with greater than 7 dB enhancement of AM efficiency was achieved within the range of appropriate DC biasing currents, but this gain dropped rapidly outside this range. We observed a 4 dB gain in the optical AM efficiency under non-ideal biasing conditions. This value agreed with the measured gain for the electrical AM efficiency under similar conditions. We also examined the gain lever effect under large signal modulation for digital logic switching applications. To get a useful gain lever for optical gain quenched logic, a long control section is needed to preserve the gain lever strength and a long interaction length between the input optical signal and the lasing field of the diode must be provided. The gain lever parameter space has been fully characterized and validated against numerical simulations of a semi-3D hybrid beam propagation method (BPM) model for the coupled electron-photon rate equation. We find that the optical gain lever can be treated using the electrical injection model, once the absorption in the sample is known.

  17. External-field-free magnetic biosensor

    SciTech Connect (OSTI)

    Li, Yuanpeng; Wang, Yi; Klein, Todd; Wang, Jian-Ping, E-mail: jpwang@umn.edu [Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

    2014-03-24

    In this paper, we report a magnetic nanoparticle (MNP) detection scheme without the presence of any external magnetic field. The proposed magnetic sensor uses a patterned groove structure within the sensor so that no external magnetic field is needed to magnetize the MNPs. An example is given based on a giant magnetoresistance (GMR) sensing device with a spin valve structure. For this structure, the detection of MNPs located inside the groove and near the free layer is demonstrated under no external magnetic field. Micromagnetic simulations are performed to calculate the signal to noise level of this detection scheme. A maximum signal to noise ratio (SNR) of 18.6?dB from one iron oxide magnetic nanoparticle with 8?nm radius is achieved. As proof of concept, this external-field-free GMR sensor with groove structure of 200?nm??200?nm is fabricated using a photo and an electron beam integrated lithography process. Using this sensor, the feasibility demonstration of the detection SNR of 9.3?dB is achieved for 30??l magnetic nanoparticles suspension (30?nm iron oxide particles, 1?mg/ml). This proposed external-field-free sensor structure is not limited to GMR devices and could be applicable to other magnetic biosensing devices.

  18. Heterogeneous microring and Mach-Zehnder modulators based on lithium niobate and chalcogenide glasses on silicon

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rao, Ashutosh; Patil, Aniket; Chiles, Jeff; Malinowski, Marcin; Novak, Spencer; Richardson, Kathleen; Rabiei, Payam; Fathpour, Sasan

    2015-08-20

    In this study, thin films of lithium niobate are wafer bonded onto silicon substrates and rib-loaded with a chalcogenide glass, Ge23Sb7S70, to demonstrate strongly confined single-mode submicron waveguides, microring modulators, and Mach-Zehnder modulators in the telecom C band. The 200 μm radii microring modulators present 1.2 dB/cm waveguide propagation loss, 1.2 × 105 quality factor, 0.4 GHz/V tuning rate, and 13 dB extinction ratio. The 6 mm long Mach-Zehnder modulators have a half-wave voltage-length product of 3.8 V.cm and an extinction ratio of 15 dB. The demonstrated work is a key step towards enabling wafer scale dense on-chip integration ofmore » high performance lithium niobate electro-optical devices on silicon for short reach optical interconnects and higher order advanced modulation schemes.« less

  19. Ultra-low power microwave CHFET integrated circuit development

    SciTech Connect (OSTI)

    Baca, A.G.; Hietala, V.M.; Greenway, D.; Sloan, L.R.; Shul, R.J.; Muyshondt, G.P.; Dubbert, D.F.

    1998-04-01

    This report summarizes work on the development of ultra-low power microwave CHFET integrated circuit development. Power consumption of microwave circuits has been reduced by factors of 50--1,000 over commercially available circuits. Positive threshold field effect transistors (nJFETs and PHEMTs) have been used to design and fabricate microwave circuits with power levels of 1 milliwatt or less. 0.7 {micro}m gate nJFETs are suitable for both digital CHFET integrated circuits as well as low power microwave circuits. Both hybrid amplifiers and MMICs were demonstrated at the 1 mW level at 2.4 GHz. Advanced devices were also developed and characterized for even lower power levels. Amplifiers with 0.3 {micro}m JFETs were simulated with 8--10 dB gain down to power levels of 250 microwatts ({mu}W). However 0.25 {micro}m PHEMTs proved superior to the JFETs with amplifier gain of 8 dB at 217 MHz and 50 {mu}W power levels but they are not integrable with the digital CHFET technology.

  20. Assessment of Possible Cycle Lengths for Fully-Ceramic Micro-Encapsulated Fuel-Based Light Water Reactor Concepts

    SciTech Connect (OSTI)

    R. Sonat Sen; Michael A. Pope; Abderrafi M. Ougouag; Kemal O. Pasamehmetoglu

    2012-04-01

    The tri-isotropic (TRISO) fuel developed for High Temperature reactors is known for its extraordinary fission product retention capabilities [1]. Recently, the possibility of extending the use of TRISO particle fuel to Light Water Reactor (LWR) technology, and perhaps other reactor concepts, has received significant attention [2]. The Deep Burn project [3] currently focuses on once-through burning of transuranic fissile and fissionable isotopes (TRU) in LWRs. The fuel form for this purpose is called Fully-Ceramic Micro-encapsulated (FCM) fuel, a concept that borrows the TRISO fuel particle design from high temperature reactor technology, but uses SiC as a matrix material rather than graphite. In addition, FCM fuel may also use a cladding made of a variety of possible material, again including SiC as an admissible choice. The FCM fuel used in the Deep Burn (DB) project showed promising results in terms of fission product retention at high burnup values and during high-temperature transients. In the case of DB applications, the fuel loading within a TRISO particle is constituted entirely of fissile or fissionable isotopes. Consequently, the fuel was shown to be capable of achieving reasonable burnup levels and cycle lengths, especially in the case of mixed cores (with coexisting DB and regular LWR UO2 fuels). In contrast, as shown below, the use of UO2-only FCM fuel in a LWR results in considerably shorter cycle length when compared to current-generation ordinary LWR designs. Indeed, the constraint of limited space availability for heavy metal loading within the TRISO particles of FCM fuel and the constraint of low (i.e., below 20 w/0) 235U enrichment combine to result in shorter cycle lengths compared to ordinary LWRs if typical LWR power densities are also assumed and if typical TRISO particle dimensions and UO2 kernels are specified. The primary focus of this summary is on using TRISO particles with up to 20 w/0 enriched uranium kernels loaded in Pressurized Water Reactor (PWR) assemblies. In addition to consideration of this 'naive' use of TRISO fuel in LWRs, several refined options are briefly examined and others are identified for further consideration including the use of advanced, high density fuel forms and larger kernel diameters and TRISO packing fractions. The combination of 800 {micro}m diameter kernels of 20% enriched UN and 50% TRISO packing fraction yielded reactivity sufficient to achieve comparable burnup to present-day PWR fuel.

  1. Very High Temperature Reactor (VHTR) Deep Burn Core and Fuel Analysis -- Complete Design Selection for the Pebble Bed Reactor

    SciTech Connect (OSTI)

    B. Boer; A. M. Ougouag

    2010-09-01

    The Deep-Burn (DB) concept focuses on the destruction of transuranic nuclides from used light water reactor fuel. These transuranic nuclides are incorporated into TRISO coated fuel particles and used in gas-cooled reactors with the aim of a fractional fuel burnup of 60 to 70% in fissions per initial metal atom (FIMA). This high performance is expected through the use of multiple recirculation passes of the fuel in pebble form without any physical or chemical changes between passes. In particular, the concept does not call for reprocessing of the fuel between passes. In principle, the DB pebble bed concept employs the same reactor designs as the presently envisioned low-enriched uranium core designs, such as the 400 MWth Pebble Bed Modular Reactor (PBMR-400). Although it has been shown in the previous Fiscal Year (2009) that a PuO2 fueled pebble bed reactor concept is viable, achieving a high fuel burnup, while remaining within safety-imposed prescribed operational limits for fuel temperature, power peaking and temperature reactivity feedback coefficients for the entire temperature range, is challenging. The presence of the isotopes 239-Pu, 240-Pu and 241-Pu that have resonances in the thermal energy range significantly modifies the neutron thermal energy spectrum as compared to a standard, UO2-fueled core. Therefore, the DB pebble bed core exhibits a relatively hard neutron energy spectrum. However, regions within the pebble bed that are near the graphite reflectors experience a locally softer spectrum. This can lead to power and temperature peaking in these regions. Furthermore, a shift of the thermal energy spectrum with increasing temperature can lead to increased absorption in the resonances of the fissile Pu isotopes. This can lead to a positive temperature reactivity coefficient for the graphite moderator under certain operating conditions. The effort of this task in FY 2010 has focused on the optimization of the core to maximize the pebble discharge burnup level, while retaining its inherent safety characteristics. Using generic pebble bed reactor cores, this task will perform physics calculations to evaluate the capabilities of the pebble bed reactor to perform utilization and destruction of LWR used-fuel transuranics. The task will use established benchmarked models, and will introduce modeling advancements appropriate to the nature of the fuel considered (high TRU content and high burn-up).

  2. 3D parallel-detection microwave tomography for clinical breast imaging

    SciTech Connect (OSTI)

    Epstein, N. R.; Meaney, P. M.; Paulsen, K. D.

    2014-12-15

    A biomedical microwave tomography system with 3D-imaging capabilities has been constructed and translated to the clinic. Updates to the hardware and reconfiguration of the electronic-network layouts in a more compartmentalized construct have streamlined system packaging. Upgrades to the data acquisition and microwave components have increased data-acquisition speeds and improved system performance. By incorporating analog-to-digital boards that accommodate the linear amplification and dynamic-range coverage our system requires, a complete set of data (for a fixed array position at a single frequency) is now acquired in 5.8 s. Replacement of key components (e.g., switches and power dividers) by devices with improved operational bandwidths has enhanced system response over a wider frequency range. High-integrity, low-power signals are routinely measured down to ?130 dBm for frequencies ranging from 500 to 2300 MHz. Adequate inter-channel isolation has been maintained, and a dynamic range >110 dB has been achieved for the full operating frequency range (5002900 MHz). For our primary band of interest, the associated measurement deviations are less than 0.33% and 0.5 for signal amplitude and phase values, respectively. A modified monopole antenna array (composed of two interwoven eight-element sub-arrays), in conjunction with an updated motion-control system capable of independently moving the sub-arrays to various in-plane and cross-plane positions within the illumination chamber, has been configured in the new design for full volumetric data acquisition. Signal-to-noise ratios (SNRs) are more than adequate for all transmit/receive antenna pairs over the full frequency range and for the variety of in-plane and cross-plane configurations. For proximal receivers, in-plane SNRs greater than 80 dB are observed up to 2900 MHz, while cross-plane SNRs greater than 80 dB are seen for 6 cm sub-array spacing (for frequencies up to 1500 MHz). We demonstrate accurate recovery of 3D dielectric property distributions for breast-like phantoms with tumor inclusions utilizing both the in-plane and new cross-plane data.

  3. Cold Fusion Production and Decay of Neutron-Deficient Isotopes of Dubnium and Development of Extraction Systems for Group V Elements

    SciTech Connect (OSTI)

    Gates, Jacklyn M.

    2008-07-31

    Excitation functions for the 1n and 2n exit channels of the 208Pb(51V,xn)259-xDb reaction were measured. A maximum cross section of the 1n exit channel of 2070+1100/-760 pb was measured at an excitation energy of 16.0 +- 1.8 MeV. For the 2n exit channel, a maximum cross section of 1660+450/-370 pb was measured at 22.0 +- 1.8 MeV excitation energy. The 1n excitation function for the 209Bi(50Ti,n)258Db reaction was remeasured, resulting in a cross section of 5480+1730/1370 pb at an excitation energy of 16.0 +- 1.6 MeV. Differences in cross section maxima are discussed in terms of the fusion probability below the barrier. The extraction of niobium (Nb) and tantalum (Ta) from hydrochloric acid and mixed hydrochloric acid/lithium chloride media by bis(2-ethylhexyl) hydrogen phosphate (HDEHP) and bis(2-ethylhexyl) hydrogen phosphite (BEHP) was studied. The goal of the experiments was to find a system that demonstrates selectivity among the members of group five of the Periodic Table and is also suitable for the study of dubnium (Db, Z = 105). Experiments with niobium and tantalum were performed with carrier (10-6 M), carrier free (10-10 M) and trace (10-16 M) concentrations of metal using hydrochloric acid solution with concentrations ranging from 1 - 11 M. The extraction of niobium and tantalum from mixed hydrochloric acid/lithium chloride media by HDEHP and BEHP as a function of hydrogen ion (H+) concentration was also investigated. The data obtained are used as the basis to discuss the speciation of niobium and tantalum under the conditions studied and to evaluate possible extraction mechanisms. The 74Se(18O,p3n)88gNb excitation function was measured to determine the best energy for producing the 88Nb used in chemistry experiments. A maximum cross section of 495 +- 5 mb was observed at an 18O energy of 74.0 MeV. The half life of 88gNb was measured and determined to be 14.56 +- 0.11 min.

  4. InP quantum dots: Electronic structure, surface effects, and the redshifted emission

    SciTech Connect (OSTI)

    Fu, H.; Zunger, A.

    1997-07-01

    We present pseudopotential plane-wave electronic-structure calculations on InP quantum dots in an effort to understand quantum confinement and surface effects and to identify the origin of the long-lived and redshifted luminescence. We find that (i) unlike the case in small GaAs dots, the lowest unoccupied state of InP dots is the {Gamma}{sub 1c}-derived direct state rather than the X{sub 1c}-derived indirect state and (ii) unlike the prediction of {bold k}{center_dot}{bold p} models, the highest occupied state in InP dots has a 1sd-type envelope function rather than a (dipole-forbidden) 1pf envelope function. Thus explanations (i) and (ii) to the long-lived redshifted emission in terms of an orbitally forbidden character can be excluded. Furthermore, (iii) fully passivated InP dots have no surface states in the gap. However, (iv) removal of the anion-site passivation leads to a P dangling bond (DB) state just above the valence band, which will act as a trap for photogenerated holes. Similarly, (v) removal of the cation-site passivation leads to an In dangling-bond state below the conduction band. While the energy of the In DB state depends only weakly on quantum size, its radiative lifetime increases with quantum size. The calculated {approximately}300-meV redshift and the {approximately}18 times longer radiative lifetime relative to the dot-interior transition for the 26-{Angstrom} dot with an In DB are in good agreement with the observations of full-luminescence experiments for unetched InP dots. Yet, (vi) this type of redshift due to surface defect is inconsistent with that measured in {ital selective} excitation for HF-etched InP dots. (vii) The latter type of ({open_quotes}resonant{close_quotes}) redshift is compatible with the calculated {ital screened} singlet-triplet splitting in InP dots, suggesting that the slow emitting state seen in selective excitation could be a triplet state. {copyright} {ital 1997} {ital The American Physical Society}

  5. Optimization of Concurrent Deployments of the Juvenile Salmon Acoustic Telemetry System and Other Hydroacoustic Equipment at John Day Dam

    SciTech Connect (OSTI)

    Ploskey, Gene R.; Hughes, James S.; Khan, Fenton; Kim, Jina; Lamarche, Brian L.; Johnson, Gary E.; Choi, Eric Y.; Faber, Derrek M.; Wilberding, Matthew C.; Deng, Zhiqun; Weiland, Mark A.; Zimmerman, Shon A.; Fischer, Eric S.; Cushing, Aaron W.

    2008-09-01

    The purpose of this report is to document the results of the acoustic optimization study conducted at John Day Dam during January and February 2008. The goal of the study was to optimize performance of the Juvenile Salmon Acoustic Telemetry System (JSATS) by determining deployment and data acquisition methods to minimize electrical and acoustic interference from various other acoustic sampling devices. Thereby, this would allow concurrent sampling by active and passive acoustic methods during the formal evaluations of the prototype surface flow outlets at the dam during spring and summer outmigration seasons for juvenile salmonids. The objectives for the optimization study at John Day Dam were to: 1. Design and test prototypes and provide a total needs list of pipes and trolleys to deploy JSATS hydrophones on the forebay face of the powerhouse and spillway. 2. Assess the effect on mean percentage decoded of JSATS transmissions from tags arrayed in the forebay and detected on the hydrophones by comparing: turbine unit OFF vs. ON; spill bay OPEN vs. CLOSED; dual frequency identification sonar (DIDSON) and acoustic Doppler current profiler (ADCP) both OFF vs. ON at a spill bay; and, fixed-aspect hydroacoustic system OFF vs. ON at a turbine unit and a spill bay. 3. Determine the relationship between fixed-aspect hydroacoustic transmit level and mean percentage of JSATS transmissions decoded. The general approach was to use hydrophones to listen for transmissions from JSATS tags deployed in vertical arrays in a series perpendicular to the face of the dam. We used acoustic telemetry equipment manufactured by Technologic and Sonic Concepts. In addition, we assessed old and new JSATS signal detectors and decoders and two different types of hydrophone baffling. The optimization study consisted of a suite of off/on tests. The primary response variable was mean percentage of tag transmissions decoded. We found that there was no appreciable adverse effect on mean percentage decoded for JSATS transmitters from: turbine operations; spillway operations; DIDSON/ADCP acoustic energy; and PAS hydroacoustic systems at transmit level of -12 dB, although there was a significant impact at all higher transmit levels (-11 to -6 dB). The main conclusion from this optimization study is that valid JSATS telemetry data can be collected simultaneously with a DIDSON/ADCP and a PAS hydroacoustic system at transmit level -12 dB. Multiple evaluation tools should be considered to increase the robustness and thoroughness of future fish passage evaluations at John Day and other dams.

  6. Unexpected gender difference in sensitivity to the acute toxicity of dioxin in mice

    SciTech Connect (OSTI)

    Pohjanvirta, Raimo; Miettinen, Hanna; Sankari, Satu; Hegde, Nagabhooshan; Lindn, Jere; Department of Veterinary Biosciences, Faculty of Veterinary Medicine, University of Helsinki, P.O. Box 66, FI-00014 University of Helsinki

    2012-07-15

    The acute toxicity of the ubiquitous environmental contaminant 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) varies widely among species and strains. Previous studies in rats have established that females are approximately 2-fold more sensitive to TCDD lethality than males. However, there is a surprising gap in the literature regarding possible gender-related sensitivity differences in mice. In the present study, by using three substrains of TCDD-sensitive C57BL/6 mice and transgenic mice on this background, we demonstrated that: 1) in contrast to the situation in rats, female mice are the more resistant gender; 2) the magnitude of the divergence between male and female mice depends on the substrain, but can amount to over 10-fold; 3) AH receptor protein expression levels or mutations in the primary structure of this receptor are not involved in the resistance of female mice of a C57BL/6 substrain, despite their acute LD{sub 50} for TCDD being over 5000 ?g/kg; 4) transgenic mice that globally express the rat wildtype AH receptor follow the mouse type of gender difference; 5) in gonadectomized mice, ovarian estrogens appear to enhance TCDD resistance, whereas testicular androgens seem to augment TCDD susceptibility; and 6) the gender difference correlates best with the severity of liver damage, which is also reflected in hepatic histopathology and the expression of pro-inflammatory cytokines, especially IL-6. Hence, the two closely related rodent species most often employed in toxicological risk characterization studies, rat and mouse, represent opposite examples of the influence of gender on dioxin sensitivity, further complicating the risk assessment of halogenated aromatic hydrocarbons. -- Highlights: ? In contrast to rats, male mice are more sensitive to TCDD toxicity than female mice. ? The resistance of female C57BL/6Kuo mice matches or exceeds that of male DBA/2 mice. ? The resistance of female C57BL/6Kuo mice is not based on AHR structure or abundance. ? Both androgens and estrogens appear to influence TCDD sensitivity. ? TCDD sensitivity correlates best with the severity of lesions in the liver.

  7. Ambient H sub 2 S monitoring in the vicinity of Hawaii's first geothermal power plant

    SciTech Connect (OSTI)

    Morrow, J.W. ); Thomas, D.M. ); Burkard, H.D. )

    1988-01-01

    In December, 1975, work began on Hawaii's first successful geothermal well in the East Rift Zone of Kilauea Volcano on the Island of Hawaii (Figure 1). By July, 1976, the well, named Hawaii Geothermal Project - A (HGP-A), was complete to a depth of almost 2 km and had encountered a volcanically driven hydrothermal system having a temperature in excess of 358{degrees} C and a fluid chemistry composed of a mixture of seawater, meteoric water, and volcanic volatiles. The principal chemical constituents of the fluid are listed in Table I. Note the relatively high H{sub 2}S concentration which ranged 900 - 1,000 ppmw. During the early testing of the well, the superheated geothermal fluid was allowed to flash at normal atmospheric pressure with steam and noncondensable gases being released unabated into the atmosphere. The high H{sub 2}S and noise (120 dBA) levels and the close proximity of the Leilani Estates residential subdivision were cause for concern and efforts were thus made to mitigate these impacts. Certain elements of the initial test protocol required that the well be allowed to flow freely and unabated. During these periods public notice and prewarning were the most feasible means of mitigation. At other times, the mixed fluid is separated into steam and brine phases with the steam phase being treated with NaOH and then released through a rock muffler. The brine phase is released through a separate muffling system. Chemical treatment of the stream with NaOH converts the H{sub 2}S into a soluble sulfide salt through the following reaction: H{sub 2}S(g) + NaOH {r arrow} NaHS(s) + H{sub 2}O. This paper discusses early flow testing revealed that the well was able to produce a steady flow of approximately 50,000 kg per hour of steam and water at a pressure of 1200 kPA and thus appeared suitable for power generation.

  8. National K-12 Educator Conference; "Earth Then, Earth Now: Our Changing Climate" (July 23-24, 2008)

    SciTech Connect (OSTI)

    Flammer, Karen; O'Shaughnessy, Tam

    2013-12-11

    With the support of the Department of Energy, the National Science Teachers Association and the National Oceanic and Atmospheric Administration, Imaginary Lines Inc. (dba Sally Ride Science) delivered a highly successful 2-day conference to 165 K-12 educators on climate change. The event took place on July 23rd and 24th, 2008 at the NOAA facility in Silver Spring, MD. The conference celebrated the 25th anniversary of Dr. Sally Rides first flight into space in 1983 and examined how our understanding of Earth has changed in those 25 years. One the first day of the conference, participants heard a keynote talk delivered by Dr. Sally Ride, followed by presentations by well-known climate change scientists: Dr. Richard Somerville, Dr. Inez Fung and Dr. Susan Solomon. These sessions were concurrently webcast and made available to educators who were unable to attend the conference. On the second day of the conference, participants attended breakout sessions where they performed climate change activities (e.g. Neato Albedo!, Greenhouse in a Bottle, Shell-Shocked) that they could take back to their classrooms. Additional break-out sessions on using remote sensing images to illustrate climate change effects on Earths surface and how to address the climate change debate, were also offered. During lunch, participants attended an Educator Street Fair and had the opportunity to interact with representatives from NOAA, NASA, the EPA, NEEF and the JASON project. A follow-up evaluation survey was administered to all conference attendees immediately following the conference to evaluate its effectiveness. The results of this survey were overwhelmingly positive. The conference materials: presentation Power Points, workshop handouts and activities were available for teachers to download after the conference from the Sally Ride Science website. In summary, the approximately $55K support for the Department of Energy was used to help plan, deliver and evaluate the Earth Then, Earth Now: Our Changing Climate, conference which took place on July 23rd and 24th, 2008 at the NOAA facility in Silver Spring, MD.

  9. High frequency thermoacoustic refrigerator. Annual summary report, 2 September 1993-31 May 1994

    SciTech Connect (OSTI)

    Symko, O.G.

    1994-06-16

    A small thermoacoustic refrigerator was developed for operation at 5 kHz. Its main components are a piezoelectric driver of the bimorph type, a cotton wool stack, a 1/2-wave resonator (operated at its 3rd harmonic), and photolithographically processed copper heat exchangers. Tests with air at 1 atmosphere as the working gas produced a temperature difference Delta T across the stack of 32 deg C in 4 seconds for an acoustic power input level of 160 dB. The refrigerator did not have thermal insulation. Improved performance is expected with pressurized helium gas and helium-xenon mixtures. The performance of this refrigerator and its small size make it attractive for applications in high speed electronics and possibly IR detectors.

  10. High frequency thermoacoustic refrigerator. Annual summary report, 1 June 1994-31 May 1995

    SciTech Connect (OSTI)

    Symko, O.G.

    1995-08-15

    Results are presented on the development of a high frequency thermoacoustic refrigerator and its performance. The device consists of a piezoelectric driver, operated around 5kHz, which is coupled to a cylindrical resonator containing air at 1 atmosphere as the compressible fluid. For sound levels of 155dB at the stack, a maximum T of 41 C was reached across a cotton wool stack 4mm long. A cooling power of 1.2 watt was achieved with a coefficient of performance of 3. This simple and lightweight refrigerator shows promise for cooling of small samples and electronic components. The performance of this type of refrigerator at high frequencies leads to high efficiency and power density. Research is aimed at improving its performance by optimizing some of the critical parameters such as the sound level and the thermal interface between stack and heat exchangers.

  11. Deep-Burn Modular Helium Reactor Fuel Development Plan

    SciTech Connect (OSTI)

    McEachern, D

    2002-12-02

    This document contains the workscope, schedule and cost for the technology development tasks needed to satisfy the fuel and fission product transport Design Data Needs (DDNs) for the Gas Turbine-Modular Helium Reactor (GT-MHR), operating in its role of transmuting transuranic (TRU) nuclides in spent fuel discharged from commercial light-water reactors (LWRs). In its application for transmutation, the GT-MHR is referred to as the Deep-Burn MHR (DB-MHR). This Fuel Development Plan (FDP) describes part of the overall program being undertaken by the U.S. Department of Energy (DOE), utilities, and industry to evaluate the use of the GT-MHR to transmute transuranic nuclides from spent nuclear fuel. The Fuel Development Plan (FDP) includes the work on fuel necessary to support the design and licensing of the DB-MHR. The FDP is organized into ten sections. Section 1 provides a summary of the most important features of the plan, including cost and schedule information. Section 2 describes the DB-MHR concept, the features of its fuel and the plan to develop coated particle fuel for transmutation. Section 3 describes the knowledge base for fabrication of coated particles, the experience with irradiation performance of coated particle fuels, the database for fission product transport in HTGR cores, and describes test data and calculations for the performance of coated particle fuel while in a repository. Section 4 presents the fuel performance requirements in terms of as-manufactured quality and performance of the fuel coatings under irradiation and accident conditions. These requirements are provisional because the design of the DB-MHR is in an early stage. However, the requirements are presented in this preliminary form to guide the initial work on the fuel development. Section 4 also presents limits on the irradiation conditions to which the coated particle fuel can be subjected for the core design. These limits are based on past irradiation experience. Section 5 describes the Design Data Needs to: (1) fabricate the coated particle fuel, (2) predict its performance in the reactor core, (3) predict the radionuclide release rates from the reactor core, and (4) predict the performance of spent fuel in a geological repository. The heart of this fuel development plan is Section 6, which describes the development activities proposed to satisfy the DDNs presented in Section 5. The development scope is divided into Fuel Process Development, Fuel Materials Development, Fission Product Transport, and Spent Fuel Disposal. Section 7 describes the facilities to be used. Generally, this program will utilize existing facilities. While some facilities will need to be modified, there is no requirement for major new facilities. Section 8 states the Quality Assurance requirements that will be applied to the development activities. Section 9 presents detailed costs organized by WBS and spread over time. Section 10 presents a list of the types of deliverables that will be prepared in each of the WBS elements. Four Appendices contain supplementary information on: (a) design data needs, (b) the interface with the separations plant, (c) the detailed development schedule, and (d) the detailed cost estimate.

  12. Final Report on Utilization of TRU TRISO Fuel as Applied to HTR Systems Part I: Pebble Bed Reactors

    SciTech Connect (OSTI)

    Brian Boer; Abderrafi M. Ougouag

    2011-03-01

    The Deep-Burn (DB) concept [ ] focuses on the destruction of transuranic nuclides from used light water reactor (LWR) fuel. These transuranic nuclides are incorporated into tri-isotopic (TRISO) coated fuel particles and used in gas-cooled reactors with the aim of a fractional fuel burnup of 60 to 70% in fissions per initial metal atom (FIMA). This high performance is expected through the use of multiple recirculation passes of the fuel in pebble form without any physical or chemical changes between passes. In particular, the concept does not call for reprocessing of the fuel between passes. In principle, the DB pebble bed concept employs the same reactor designs as the presently envisioned low-enriched uranium core designs, such as the 400 MWth Pebble Bed Modular Reactor (PBMR-400) [ ]. Although it has been shown in the previous Fiscal Year (FY) (2009) that a PuO2 fueled pebble bed reactor concept is viable, achieving a high fuel burnup while remaining within safety-imposed prescribed operational limits for fuel temperature, power peaking, and temperature reactivity feedback coefficients for the entire temperature range, is challenging. The presence of the isotopes 239Pu, 240Pu, and 241Pu that have resonances in the thermal energy range significantly modifies the neutron thermal energy spectrum as compared to a standard, UO2-fueled core. Therefore, the DB pebble bed core exhibits a relatively hard neutron energy spectrum. However, regions within the pebble bed that are near the graphite reflectors experience a locally softer spectrum. This can lead to power and temperature peaking in these regions. Furthermore, a shift of the thermal energy spectrum with increasing temperature can lead to increased absorption in the resonances of the fissile Pu isotopes. This can lead to a positive temperature reactivity coefficient for the graphite moderator under certain operating conditions. Regarding the coated particle performance, the FY 2009 investigations showed that no significant failure is to be expected for the reference fuel particle during normal operation. It was found, however, that the sensitivity of the coating stress to the CO production in the kernel was large. The CO production is expected to be higher in DB fuel than in UO2 fuel, but its exact level has a high uncertainty. Furthermore, in the fuel performance analysis transient conditions were not yet taken into account. The effort of this task in FY 2010 has focused on the optimization of the core to maximize the pebble discharge burnup level, while retaining its inherent safety characteristics. Using generic pebble bed reactor cores, this task will perform physics calculations to evaluate the capabilities of the pebble bed reactor to perform utilization and destruction of LWR used-fuel transuranics. The task will use established benchmarked models, and will introduce modeling advancements appropriate to the nature of the fuel considered (high transuranic [TRU] content and high burn-up). Accomplishments of this work include: Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel. Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Uranium. Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Modified Open Cycle Components. Core analysis of a HTR-MODULE design loaded with Deep-Burn fuel and Americium targets.

  13. Traveling wave parametric amplifier with Josephson junctions using minimal resonator phase matching

    SciTech Connect (OSTI)

    White, T. C.; Mutus, J. Y.; Hoi, I.-C.; Barends, R.; Campbell, B.; Chen, Yu; Chen, Z.; Chiaro, B.; Dunsworth, A.; Jeffrey, E.; Kelly, J.; Neill, C.; O'Malley, P. J. J.; Roushan, P.; Sank, D.; Vainsencher, A.; Wenner, J.; Martinis, John M.; Megrant, A.; Chaudhuri, S.; and others

    2015-06-15

    Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance, while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and parallel plate capacitors using low-loss amorphous silicon dielectric. Crucially, we have inserted ?/4 resonators at regular intervals along the transmission line in order to maintain the phase matching condition between pump, signal, and idler and increase gain. We achieve an average gain of 12?dB across a 4?GHz span, along with an average saturation power of ?92 dBm with noise approaching the quantum limit.

  14. Beam position monitoring in the 100-MHz to 500-MHz frequency range using the log-ratio technique

    SciTech Connect (OSTI)

    Wells, F.D.; Shafer, R.E.; Gilpatrick, J.D.

    1993-05-01

    A logarithmic-ratio beam position monitor (BPM) circuit has been designed that operates directly from radio frequency- signals in the 100-MHz to 500-MHz frequency range. The circuit uses four logarithmic amplifiers, a pair for each channel. One amplifier per channel receives its signal input directly from a BPM electrode while the second amplifier receives the same signal attenuated by 7-dB. The two outputs of each channel are summed together and the composite video outputs are applied to a differencing amplifier. The net result is the logarithmic-ratio position measurement derived from the two input rf signals. Paralleling the pairs of outputs from the amplifiers provides measurement accuracy that is comparable to other circuit techniques used for position measurement.

  15. Beam position monitoring in the 100-MHz to 500-MHz frequency range using the log-ratio technique

    SciTech Connect (OSTI)

    Wells, F.D.; Shafer, R.E.; Gilpatrick, J.D.

    1993-01-01

    A logarithmic-ratio beam position monitor (BPM) circuit has been designed that operates directly from radio frequency- signals in the 100-MHz to 500-MHz frequency range. The circuit uses four logarithmic amplifiers, a pair for each channel. One amplifier per channel receives its signal input directly from a BPM electrode while the second amplifier receives the same signal attenuated by 7-dB. The two outputs of each channel are summed together and the composite video outputs are applied to a differencing amplifier. The net result is the logarithmic-ratio position measurement derived from the two input rf signals. Paralleling the pairs of outputs from the amplifiers provides measurement accuracy that is comparable to other circuit techniques used for position measurement.

  16. Tapered rib fiber coupler for semiconductor optical devices

    DOE Patents [OSTI]

    Vawter, Gregory A. (Albuquerque, NM); Smith, Robert Edward (Albuquerque, NM)

    2001-01-01

    A monolithic tapered rib waveguide for transformation of the spot size of light between a semiconductor optical device and an optical fiber or from the fiber into the optical device. The tapered rib waveguide is integrated into the guiding rib atop a cutoff mesa type semiconductor device such as an expanded mode optical modulator or and expanded mode laser. The tapered rib acts to force the guided light down into the mesa structure of the semiconductor optical device instead of being bound to the interface between the bottom of the guiding rib and the top of the cutoff mesa. The single mode light leaving or entering the output face of the mesa structure then can couple to the optical fiber at coupling losses of 1.0 dB or less.

  17. R

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHE R esearch a t R IKEN/GARIS Kosuke M orita Department o f P hysics, K yushu U niversity, Research G roup f or Superheavy E lement, R IKEN Nishina C enter RIKEN Kyushu U niv. 2015/3/31 Superheavy N uclei 2 015 T exas A &M U niv. 1 2014/11/08 2 科学を語る会@九大西新プラザ 3 120 119 118 117 116 115 114 113 112 Rg Ds Mt Hs Bh Sg Db Rf 162 184 262 266 265 264 262 261 261 260 259 258 257 258 260 259 260 261 262 263 262 261 SHE A A A α---decay Spontaneous fi ssion β + o r E C d

  18. Radiofrequency amplifier based on a dc superconducting quantum interference device

    DOE Patents [OSTI]

    Hilbert, C.; Martinis, J.M.; Clarke, J.

    1984-04-27

    A low noise radiofrequency amplifer, using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID and an input coil are maintained at superconductivity temperatures in a superconducting shield, with the input coil inductively coupled to the superconducting ring of the dc SQUID. A radiofrequency signal from outside the shield is applied to the input coil, and an amplified radiofrequency signal is developed across the dc SQUID ring and transmitted to exteriorly of the shield. A power gain of 19.5 +- 0.5 dB has been achieved with a noise temperature of 1.0 +- 0.4 K at a frequency of 100 MHz.

  19. Novel methods for ultra-compact ultra-low-power communications.

    SciTech Connect (OSTI)

    Mason, John Jeffrey; Ormesher, Richard C.; Kammler, Vivian Guzman

    2004-03-01

    This report describes a new algorithm for the joint estimation of carrier phase, symbol timing and data in a Turbo coded phase shift keyed (PSK) digital communications system. Jointly estimating phase, timing and data can give processing gains of several dB over conventional processing, which consists of joint estimation of carrier phase and symbol timing followed by estimation of the Turbo-coded data. The new joint estimator allows delay and phase locked loops (DLL/PLL) to work at lower bit energies where Turbo codes are most useful. Performance results of software simulations and of a field test are given, as are details of a field programmable gate array (FPGA) implementation that is currently in design.

  20. DEVELOPMENT OF DEPOSIT DETECTION SYSTEM IN PIPELINES OF THE STEELWORKS USING CS-137 GAMMA-RAY

    SciTech Connect (OSTI)

    Song, Won-Joon; Lee, Seung-Hee; Jeong, Hee-Dong

    2008-02-28

    The deposit is built up in the pipeline of the steelworks by the chemical reaction among COG (coke oven gas), BFG (blast furnace gas), moisture, and steel in the high temperature environment and obstructs the smooth gas flow. In this study a gamma-ray system is developed to detect the deposit accumulated in pipelines and calculate the accumulation rate with respect to the cross section area of pipes. Cs-137 is used as the gamma-ray source and the system is designed to apply to pipes of various diameters. This system also includes the DB for storage and display of the measurement results so that it can be used for the efficient management of the pipelines.

  1. Precision vector control of a superconducting RF cavity driven by an injection locked magnetron

    SciTech Connect (OSTI)

    Chase, Brian; Pasquinelli, Ralph; Cullerton, Ed; Varghese, Philip

    2015-03-01

    The technique presented in this paper enables the regulation of both radio frequency amplitude and phase in narrow band devices such as a Superconducting RF (SRF) cavity driven by constant power output devices i.e. magnetrons [1]. The ability to use low cost high efficiency magnetrons for accelerator RF power systems, with tight vector regulation, presents a substantial cost savings in both construction and operating costs - compared to current RF power system technology. An operating CW system at 2.45 GHz has been experimentally developed. Vector control of an injection locked magnetron has been extensively tested and characterized with a SRF cavity as the load. Amplitude dynamic range of 30 dB, amplitude stability of 0.3% r.m.s, and phase stability of 0.26 degrees r.m.s. has been demonstrated.

  2. Mechanical 144?GHz beam steering with all-metallic epsilon-near-zero lens antenna

    SciTech Connect (OSTI)

    Pacheco-Pea, V. Torres, V. Orazbayev, B. Beruete, M. Sorolla, M.; Navarro-Ca, M.; Engheta, N.

    2014-12-15

    An all-metallic steerable beam antenna composed of an ?-near-zero (ENZ) metamaterial lens is experimentally demonstrated at 144?GHz (?{sub 0}?=?2.083?mm). The ENZ lens is realized by an array of narrow hollow rectangular waveguides working just near and above the cut-off of the TE{sub 10} mode. The lens focal arc on the xz-plane is initially estimated analytically as well as numerically and compared with experimental results demonstrating good agreement. Next, a flange-ended WR-6.5 waveguide is placed along the lens focal arc to evaluate the ENZ-lens antenna steerability. A gain scan loss below 3?dB is achieved for angles up to 15.

  3. Experimental study of multichromatic terahertz wave propagation through planar micro-channels

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shin, Young-Min -Min; Northern Illinois Univ., Dekalb, IL; Fermi National Accelerator Lab.; Baig, Anisullah; Barchfeld, Robert; Gamzina, Diana; Barnett, Larry R.; Luhmann, Jr., Neville C.

    2012-04-10

    Previous theoretical and numerical studies [Y. M. Shin and L. R. Barnett, Appl. Phys. Lett. 92, 091501 (2008) and Y. M. Shin et al., Appl. Phys. Lett. 93, 221504 (2008)] have reported that a planar micro-channel with an asymmetric corrugation array supports strongly confined propagation of broadband THz plasmonic waves. The highly broad spectral response is experimentally demonstrated in the near-THz regime of 0.19-0.265 THz. Signal reflection and transmission tests on the three designed micro-channels including directional couplers resulted in a full-width-half-maximum bandwidth of ~ 50-60GHz with an insertion loss of approximately -5 dB, which is in good agreement withmoresimulation data. As a result, these micro-structures can be utilized for free electron beam and electronic/optic integrated devicesless

  4. Plasma Switch for High-Power Active Pulse Compressor

    SciTech Connect (OSTI)

    Hirshfield, Jay L.

    2013-11-04

    Results are presented from experiments carried out at the Naval Research Laboratory X-band magnicon facility on a two-channel X-band active RF pulse compressor that employed plasma switches. Experimental evidence is shown to validate the basic goals of the project, which include: simultaneous firing of plasma switches in both channels of the RF circuit, operation of quasi-optical 3-dB hybrid directional coupler coherent superposition of RF compressed pulses from both channels, and operation of the X-band magnicon directly in the RF pulse compressor. For incident 1.2 ?s pulses in the range 0.63 ? 1.35 MW, compressed pulses of peak powers 5.7 ? 11.3 MW were obtained, corresponding to peak power gain ratios of 8.3 ? 9.3. Insufficient bakeout and conditioning of the high-power RF circuit prevented experiments from being conducted at higher RF input power levels.

  5. Precision vector control of a superconducting RF cavity driven by an injection locked magnetron

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chase, Brian; Pasquinelli, Ralph; Cullerton, Ed; Varghese, Philip

    2015-03-01

    The technique presented in this paper enables the regulation of both radio frequency amplitude and phase in narrow band devices such as a Superconducting RF (SRF) cavity driven by constant power output devices i.e. magnetrons [1]. The ability to use low cost high efficiency magnetrons for accelerator RF power systems, with tight vector regulation, presents a substantial cost savings in both construction and operating costs - compared to current RF power system technology. An operating CW system at 2.45 GHz has been experimentally developed. Vector control of an injection locked magnetron has been extensively tested and characterized with a SRFmore » cavity as the load. Amplitude dynamic range of 30 dB, amplitude stability of 0.3% r.m.s, and phase stability of 0.26 degrees r.m.s. has been demonstrated.« less

  6. Narrow band wavelength selective filter using grating assisted single ring resonator

    SciTech Connect (OSTI)

    Prabhathan, P. Murukeshan, V. M.

    2014-09-15

    This paper illustrates a filter configuration which uses a single ring resonator of larger radius connected to a grating resonator at its drop port to achieve single wavelength selectivity and switching property with spectral features suitable for on-chip wavelength selection applications. The proposed configuration is expected to find applications in silicon photonics devices such as, on-chip external cavity lasers and multi analytic label-free biosensors. The grating resonator has been designed for a high Q-factor, high transmittivity, and minimum loss so that the wavelength selectivity of the device is improved. The proof-of-concept device has been demonstrated on a Silicon-on-Insulator (SOI) platform through electron beam lithography and Reactive Ion Etching (RIE) process. The transmission spectrum shows narrow band single wavelength selection and switching property with a high Free Spectral Range (FSR) ?60 nm and side band rejection ratio >15 dB.

  7. A 30 MW, 200 MHz Inductive Output Tube for RF Accelerators

    SciTech Connect (OSTI)

    R. Lawrence Ives; Michael Read

    2008-06-19

    This program investigated development of a multiple beam inductive output tube (IOT) to produce 30 MW pulses at 200 MHz. The program was successful in demonstrating feasibility of developing the source to achieve the desired power in microsecond pulses with 70% efficiency. The predicted gain of the device is 24 dB. Consequently, a 200 kW driver would be required for the RF input. Estimated cost of this driver is approximately $1.25 M. Given the estimated development cost of the IOT of approximately $750K and the requirements for a test set that would significantly increase the cost, it was determined that development could not be achieved within the funding constraints of a Phase II program.

  8. A 350 MHz, 200 kW CW, Multiple Beam Inductive Output Tube - Final Report

    SciTech Connect (OSTI)

    R.Lawrece Ives; George Collins; David Marsden Michael Read; Edward Eisen; Takuchi Kamura, Philipp Borchard

    2012-11-28

    This program developed a 200 kW CW, 350 MHz, multiple beam inductive output tube (MBIOT) for driving accelerator cavities. The MBIOT operates at 30 kV with a gain of 23 dB. The estimated efficiency is 70%. The device uses seven electron beams, each transmitting 1.4 A of current. The tube is approximately six feet long and weighs approximately 400 lbs. The prototype device will be evaluated as a potential RF source for the Advanced Photon Source at Argonne National Laboratory (ANL). Because of issues related to delivery of the electron guns, it was not possible to complete assembly and test of the MBIOT during the Phase II program. The device is being completed with support from Calabazas Creek Research, Inc., Communications & Power Industries, LLC. and the Naval Surface Weapons Center (NSWC) in Dahlgren, VA. The MBIOT will be initially tested at NSWC before delivery to ANL. The testing at NSWC is scheduled for February 2013.

  9. Large area, low capacitance, GaAs nanowire photodetector with a transparent Schottky collecting junction

    SciTech Connect (OSTI)

    Seyedi, M. A. Yao, M.; O'Brien, J.; Dapkus, P. D.; Wang, S. Y.; Nanostructured Energy Conversion Technology and Research , Advanced Studies Laboratories, University of California, Santa Cruz, California 95064, USA and NASA Ames Research Center, Moffett Field, California 94035

    2013-12-16

    We present experimental results on a GaAs/Indium-Tin-Oxide Schottky-like heterojunction photodetector based on a nanowire device geometry. By distributing the active detecting area over an array of nanowires, it is possible to achieve large area detection with low capacitance. Devices with bare GaAs and passivated AlGaAs/GaAs nanowires are fabricated to compare the responsivity with and without surface passivation. We are able to achieve responsivity of >0.5A/W and Signal-Noise-Ratio in excess of 7?dB for 2?V applied reverse bias with passivated nanowire devices. Capacitance-voltage measurement yields <5?nF/cm{sup 2}, which shows a strong possibility for high-speed applications with a broad area device.

  10. Electromagnetic Isolation Solutions in Low Temperature Cofired Ceramic (LTCC)

    SciTech Connect (OSTI)

    Krueger, Daniel; Peterson, Ken; Euler, Laurie

    2011-10-09

    Low Temperature Cofired Ceramic (LTCC) is a commercial ceramic-glass multilayer technology with compelling advantages for microelectronics, microsystems and sensors. High frequency applications require good electrical properties such as low dielectric loss and newer applications require extreme isolation from electromagnetic interference (EMI) that is even difficult to measure (-150db). Approaches to providing this isolation, once provided by via fences, have included sidewall coating and full tape thickness features (FTTF) that have been introduced by the filling of slots with via-fill compositions. Several techniques for creating these structures have been modeled for stress and temperature effects in the face of other necessary attachments, such as metallic seal frames. The relative effects of attachment media, FTTF geometry, and alternative measures will be reported. Approaches for thick film and thin film implementations are described.

  11. Development of a 402.5 MHz 140 kW Inductive Output Tube

    SciTech Connect (OSTI)

    R. Lawrence Ives; Michael Read, Robert Jackson

    2012-05-09

    This report contains the results of Phase I of an SBIR to develop a Pulsed Inductive Output Tube (IOT) with 140 kW at 400 MHz for powering H-proton beams. A number of sources, including single beam and multiple beam klystrons, can provide this power, but the IOT provides higher efficiency. Efficiencies exceeding 70% are routinely achieved. The gain is typically limited to approximately 24 dB; however, the availability of highly efficient, solid state drivers reduces the significance of this limitation, particularly at lower frequencies. This program initially focused on developing a 402 MHz IOT; however, the DOE requirement for this device was terminated during the program. The SBIR effort was refocused on improving the IOT design codes to more accurately simulate the time dependent behavior of the input cavity, electron gun, output cavity, and collector. Significant improvement was achieved in modeling capability and simulation accuracy.

  12. High power operation of an X-band coaxial multi-beam relativistic klystron amplifier

    SciTech Connect (OSTI)

    Liu, Zhenbang; Huang, Hua; Jin, Xiao; Zhao, Yucong; He, Hu; Lei, Lurong; Chen, Zhaofu [Science and Technology on High Power Microwave Laboratory, Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang 621900 (China)] [Science and Technology on High Power Microwave Laboratory, Institute of Applied Electronics, China Academy of Engineering Physics, Mianyang 621900 (China)

    2013-11-15

    An X-band coaxial multi-beam relativistic klystron amplifier is designed in order to increase output microwave power and operating frequency of the amplifier tube. The experiment is performed on a Tesla-type accelerator. The amplifier is driven by an electron beam of 2.8 kA at 720 kV, and a microwave power of 30 kW and frequency of 9.384 GHz is injected into an input cavity by means of an external source, then a microwave power of over 800 MW is extracted, the amplifier gain is about 44 dB, and conversion efficiency is 40%. The experiment proves that output power of nearly GWs can be generated with the X-band coaxial multi-beam relativistic klystron amplifier driven by a kW-level input power.

  13. Method and apparatus for detecting external cracks from within a metal tube

    DOE Patents [OSTI]

    Caffey, Thurlow W. H. (Albuquerque, NM)

    2001-08-07

    A method and tool using a continuous electromagnetic wave from a transverse magnetic-dipole source with a coaxial electric-dipole receiver is described for the detection of external sidewall cracks and other anomalies in boiler tubes and other enclosures. The invention utilizes the concept of radar backscatter rather than eddy-currents or ultrasound, which are sometimes used in prior art crack-detection methods. A numerical study of the distribution of the fields shows that the direct transmission from the source to the receiver is reduced from that in free space. Further, if the diameter of the receiver dipole is made sufficiently small, it should be possible to detect cracks with a scattering loss of up to -40 dB in thin-walled boiler tubes.

  14. Effective terahertz-to-near-infrared photon conversion in slant-stripe-type periodically poled LiNbO{sub 3}

    SciTech Connect (OSTI)

    Nawata, K.; Notake, T.; Qi, F.; Takida, Y.; Fan, S.; Hayashi, S.; Minamide, H.; Ishizuki, H.; Taira, T.

    2014-03-03

    We propose a slant-stripe-type periodically poled LiNbO{sub 3} crystal for the construction of a practical quasi-phase-matched (QPM) device for terahertz (THz) detection. A minimum detectable THz-wave energy of 25 fJ/pulse is demonstrated, and a linear input-output property with a dynamic range of 60?dB is achieved. The working frequency range of 0.15?THz for THz detection is obtained, and the central frequency of the sensitivity can be controlled by the design of the periodically poled structure. THz detection using this QPM device is a promising technique that may allow the detection of a coherent THz photon.

  15. Free-running InGaAs single photon detector with 1 dark count per second at 10% efficiency

    SciTech Connect (OSTI)

    Korzh, B. Walenta, N.; Lunghi, T.; Gisin, N.; Zbinden, H.

    2014-02-24

    We present a free-running single photon detector for telecom wavelengths based on a negative feedback avalanche photodiode (NFAD). A dark count rate as low as 1?cps was obtained at a detection efficiency of 10%, with an afterpulse probability of 2.2% for 20??s of deadtime. This was achieved by using an active hold-off circuit and cooling the NFAD with a free-piston stirling cooler down to temperatures of ?110?C. We integrated two detectors into a practical, 625?MHz clocked quantum key distribution system. Stable, real-time key distribution in the presence of 30?dB channel loss was possible, yielding a secret key rate of 350?bps.

  16. Quantum plasmonic sensing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Fan, Wenjiang; Lawrie, Benjamin J.; Pooser, Raphael C.

    2015-11-04

    Surface plasmon resonance (SPR) sensors can reach the quantum noise limit of the optical readout field in various configurations. We demonstrate that two-mode intensity squeezed states produce a further enhancement in sensitivity compared with a classical optical readout when the quantum noise is used to transduce an SPR sensor signal in the Kretschmann configuration. The quantum noise reduction between the twin beams when incident at an angle away from the plasmonic resonance, combined with quantum noise resulting from quantum anticorrelations when on resonance, results in an effective SPR-mediated modulation that yields a measured sensitivity 5 dB better than that withmore » a classical optical readout in this configuration. Furthermore, the theoretical potential of this technique points to resolving particle concentrations with more accuracy than is possible via classical approaches to optical transduction.« less

  17. Quantum plasmonic sensing

    SciTech Connect (OSTI)

    Fan, Wenjiang; Lawrie, Benjamin J.; Pooser, Raphael C.

    2015-11-04

    Surface plasmon resonance (SPR) sensors can reach the quantum noise limit of the optical readout field in various configurations. We demonstrate that two-mode intensity squeezed states produce a further enhancement in sensitivity compared with a classical optical readout when the quantum noise is used to transduce an SPR sensor signal in the Kretschmann configuration. The quantum noise reduction between the twin beams when incident at an angle away from the plasmonic resonance, combined with quantum noise resulting from quantum anticorrelations when on resonance, results in an effective SPR-mediated modulation that yields a measured sensitivity 5 dB better than that with a classical optical readout in this configuration. Furthermore, the theoretical potential of this technique points to resolving particle concentrations with more accuracy than is possible via classical approaches to optical transduction.

  18. Observation of the fundamental Nyquist noise limit in an ultra-high Q-factor cryogenic bulk acoustic wave cavity

    SciTech Connect (OSTI)

    Goryachev, Maxim Ivanov, Eugene N.; Tobar, Michael E.; Kann, Frank van; Galliou, Serge

    2014-10-13

    Thermal Nyquist noise fluctuations of high-Q bulk acoustic wave cavities have been observed at cryogenic temperatures with a DC superconducting quantum interference device amplifier. High Q modes with bandwidths of few tens of milliHz produce thermal fluctuations with a signal-to-noise ratio of up to 23?dB. The estimated effective temperature from the Nyquist noise is in good agreement with the physical temperature of the device, confirming the validity of the equivalent circuit model and the non-existence of any excess resonator self-noise. The measurements also confirm that the quality factor remains extremely high (Q?>?10{sup 8} at low order overtones) for very weak (thermal) system motion at low temperatures, when compared to values measured with relatively strong external excitation. This result represents an enabling step towards operating such a high-Q acoustic device at the standard quantum limit.

  19. Radiofrequency amplifier based on a dc superconducting quantum interference device

    DOE Patents [OSTI]

    Hilbert, Claude (Berkeley, CA); Martinis, John M. (Berkeley, CA); Clarke, John (Berkeley, CA)

    1986-01-01

    A low noise radiofrequency amplifier (10), using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID (11) and an input coil (12) are maintained at superconductivity temperatures in a superconducting shield (13), with the input coil (12) inductively coupled to the superconducting ring (17) of the dc SQUID (11). A radiofrequency signal from outside the shield (13) is applied to the input coil (12), and an amplified radiofrequency signal is developed across the dc SQUID ring (17) and transmitted to exteriorly of the shield (13). A power gain of 19.5.+-.0.5 dB has been achieved with a noise temperature of 1.0.+-.0.4 K. at a frequency of 100 MHz.

  20. Piezoelectric transducer design for a miniaturized injectable acoustic transducer

    SciTech Connect (OSTI)

    Li, Huidong; Jung, Ki Won; Deng, Zhiqun

    2015-10-07

    Acoustic telemetry has been an important tool in the last 20 years for studying fish survival and migration behaviors during and after dam passage. This technology uses implantable acoustic transmitters as tags to three-dimensionally track the movement of fish. However, the relatively large weights and sizes of commercially available transmitters limit the populations of fish that could be studied. The surgical implantation procedures required may also injure fish and also incur a significant amount of labor. Therefore, a smaller, lighter, and injectable tag was needed, and similar or better acoustic performance and service life over that provided by existing commercial tags was desired. To develop such a small transmitter, a number of technical challenges, including design optimization of the piezoelectric transducer, needed to be overcome. The goal of our efforts to optimize the transducer focused on improving the average source level in the 180° range in which the transmitter was facing the receiving hydrophone, so as to increase the transmitter’s detection probability. This paper reports the techniques that were explored and developed to achieve this goal. We found that a novel off-center tube transducer improved the average source level of the front half of the transducer by 1.5 dB. An acoustic reflector attached to the back of the transducer also improved the source level by 3 dB when the transducer was pointed toward the receiving hydrophone, although the source level on the sides of the transducer was reduced. We found that too small a gap between the transducer and the component placed behind it resulted in distortion of the beam pattern. To overcome that issue, we connected a tuning inductor in series with the transducer to help optimize the source level. The findings and techniques developed in this work contributed to the successful development and implementation of a new injectable transmitter.

  1. Facilely preparation and microwave absorption properties of Fe{sub 3}O{sub 4} nanoparticles

    SciTech Connect (OSTI)

    Wang, Guiqin, E-mail: wanggq@dlut.edu.cn [School of Materials Science and Engineering, Dalian University of Technology, Dalian 116085 (China); Chang, Yongfeng; Wang, Lifang; Liu, Lidong; Liu, Chao [School of Materials Science and Engineering, Dalian University of Technology, Dalian 116085 (China)

    2013-03-15

    Highlights: ? A bran-new method is firstly used to fabricate Fe{sub 3}O{sub 4} nanoparticles. ? The detailed analysis of formation mechanism is discussed. ? The electromagnetic absorption properties are defined. ? The effect of nanometer-sized is considered for the excellent microwave absorption. - Abstract: The Fe{sub 3}O{sub 4} nanoparticles were prepared by a novel wet-chemical method which shows its highly synthesizing efficiency and controllability. A possible formation mechanism was also proposed to explain the synthesizing process. X-ray diffraction (XRD) and transmission electron microscope (TEM) were employed and yielded an examination of an average diameter of 77 nm of the as-synthesized Fe{sub 3}O{sub 4} nanoparticles with face-centered cubic structure. Vibrating sample magnetometer (VSM) and vector network analyzer were employed to measure the magnetic property and electromagnetic parameters of the nanoparticles, then reflection losses (RL (dB)) were calculated in the frequency range of 218 GHz. A large saturation magnetization (72.36 emu/g) and high coercivity (95 Oe) were determined and indicated that the Fe{sub 3}O{sub 4} nanoparticles own strong magnetic performance. Following simulation results showed that the lowest reflection loss of the sample was ?21.2 dB at 5.6 GHz with layer thickness of 6 mm. Effect of nanometer-sized further provided an explanation for the excellent microwave absorption behavior shown by the Fe{sub 3}O{sub 4} nanoparticles.

  2. Hearing Protection Evaluation for the Combat Arms Earplug at Idaho National Laboratory

    SciTech Connect (OSTI)

    James Lovejoy

    2007-03-01

    The Idaho National Laboratory (INL) is managed by Battelle Energy Alliance, LLC (BEA) for the Department of Energy. The INL Protective Security Forces (Pro Force) are involved in training exercises that generate impulse noise by small arms fire. Force-on-force (FOF) training exercises that simulate real world scenarios require the Pro Force to engage the opposition force (OPFOR) while maintaining situational awareness through verbal communications. The Combat Arms earplug was studied to determine if it provides adequate hearing protection in accordance with the requirements of MIL-STD-1474C/D. The Combat Arms earplug uses a design that allows continuous noise through a critical orifice while effectively attenuating high-energy impulse noise. The earplug attenuates noise on a non linear scale, as the sound increases the attenuation increases. The INL studied the effectiveness of the Combat Arms earplug with a Bruel & Kjaer (B&K) head and torso simulator used with a selection of small arms to create impulse sound pressures. The Combat Arms earplugs were inserted into the B&K head and torso ears, and small arms were then discharged to generate the impulse noise. The INL analysis of the data indicates that the Combat Arms earplug does provide adequate protection, in accordance with MIL-STD-1474C/D, when used to protect against impulse noise generated by small arms fire using blank ammunition. Impulse noise generated by small arms fire ranged from 135160 dB range unfiltered un-weighted. The Combat Arms earplug attenuated the sound pressure 1025 dB depending on the impulse noise pressure. This assessment is consistent with the results of previously published studies on the Combat Arms earplug (see Section 5, References). Based upon these result, the INL intends to use the Combat Arms earplug for FOF training exercises.

  3. Toward Dose Optimization for Fractionated Stereotactic Radiotherapy for Acoustic Neuromas: Comparison of Two Dose Cohorts

    SciTech Connect (OSTI)

    Andrews, David W. Werner-Wasik, Maria; Den, Robert B.; Paek, Sun Ha; Downes-Phillips, Beverly; Willcox, Thomas O.; Bednarz, Greg; Maltenfort, Mitchel; Evans, James J.; Curran, Walter J.

    2009-06-01

    Purpose: To describe our initial experience of fractionated stereotactic radiotherapy dose reduction comparing two dose cohorts with examination of tumor control rates and serviceable hearing preservation rates. Methods and Materials: After institutional review board approval, we initiated a retrospective chart review to study the hearing outcomes and tumor control rates. All data were entered into a JMP, version 7.01, statistical spreadsheet for analysis. Results: A total of 89 patients with serviceable hearing had complete serial audiometric data available for analysis. The higher dose cohort included 43 patients treated to 50.4 Gy with a median follow-up (latest audiogram) of 53 weeks and the lower dose cohort included 46 patients treated to 46.8 Gy with a median follow-up of 65 weeks. The tumor control rate was 100% in both cohorts, and the pure tone average was significantly improved in the low-dose cohort (33 dB vs. 40 dB, p = 0.023, chi-square). When the patient data were analyzed at comparable follow-up points, the actuarial hearing preservation rate was significantly longer for the low-dose cohort than for the high-dose cohort (165 weeks vs. 79 weeks, p = .0318, log-rank). Multivariate analysis revealed the dose cohort (p = 0.0282) and pretreatment Gardner-Robertson class (p = 0.0215) to be highly significant variables affecting the hearing outcome. Conclusion: A lower total dose at 46.8 Gy was associated with a 100% local control tumor rate and a greater hearing preservation rate. An additional dose reduction is justified to achieve the optimal dose that will yield the greatest hearing preservation rate without compromising tumor control for these patients.

  4. Development of a magnetostrictive borehole seismic source

    SciTech Connect (OSTI)

    Cutler, R.P.; Sleefe, G.E.; Keefe, R.G.

    1997-04-01

    A magnetostrictive borehole seismic source was developed for use in high resolution crosswell surveys in environmental applications. The source is a clamped, vertical-shear, swept frequency, reaction-mass shaker design consisting of a spring pre-loaded magnetostrictive rod with permanent magnet bias, drive coils to induce an alternating magnetic field, and an integral tungsten reaction mass. The actuator was tested extensively in the laboratory. It was then incorporated into an easily deployable clamped downhole tool capable of operating on a standard 7 conductor wireline in borehole environments to 10,000{degrees} deep and 100{degrees}C. It can be used in either PVC or steel cased wells and the wells can be dry or fluid filled. It has a usable frequency spectrum of {approx} 150 to 2000 Hz. The finished tool was successfully demonstrated in a crosswell test at a shallow environmental site at Hanford, Washington. The source transmitted signals with a S/N ratio of 10-15 dB from 150-720 Hz between wells spaced 239 feet apart in unconsolidated gravel. The source was also tested successfully in rock at an oil field test site, transmitting signals with a S/N ratio of 5-15 dB over the full sweep spectrum from 150-2000 Hz between wells spaced 282 feet apart. And it was used successfully on an 11,000{degrees} wireline at a depth of 4550{degrees}. Recommendations for follow-on work include improvements to the clamp, incorporation of a higher sample rate force feedback controller, and increases in the force output of the tool.

  5. The white dwarfs within 25 pc of the Sun: Kinematics and spectroscopic subtypes

    SciTech Connect (OSTI)

    Sion, Edward M.; McCook, George P.; Wasatonic, Richard; Myszka, Janine; Holberg, J. B.; Oswalt, Terry D. E-mail: george.mccook@villanova.edu E-mail: janine.myszka@villanova.edu E-mail: toswalt@fit.edu

    2014-06-01

    We present the fractional distribution of spectroscopic subtypes, range and distribution of surface temperatures, and kinematical properties of the white dwarfs (WDs) within 25 pc of the Sun. There is no convincing evidence of halo WDs in the total 25 pc sample of 224 WDs. There is also little to suggest the presence of genuine thick disk subcomponent members within 25 pc. It appears that the entire 25 pc sample likely belongs to the thin disk. We also find no significant kinematic differences with respect to spectroscopic subtypes. The total DA to non-DA ratio of the 25 pc sample is 1.8, a manifestation of deepening envelope convection, which transforms DA stars with sufficiently thin H surface layers into non-DAs. We compare this ratio with the results of other studies. We find that at least 11% of the WDs within 25 pc of the Sun (the DAZ and DZ stars) have photospheric metals that likely originate from accretion of circumstellar material (debris disks) around them. If this interpretation is correct, then it suggests the possibility that a similar percentage have planets, asteroid-like bodies, or debris disks orbiting them. Our volume-limited sample reveals a pileup of DC WDs at the well-known cutoff in DQ WDs at T {sub eff} ? 6000 K. Mindful of small number statistics, we speculate on its possible evolutionary significance. We find that the incidence of magnetic WDs in the 25 pc sample is at least 8% in our volume-limited sample, dominated by cool WDs. We derive approximate formation rates of DB and DQ degenerates and present a preliminary test of the evolutionary scenario that all cooling DB stars become DQ WDs via helium convective dredge-up with the diffusion tail of carbon extending upward from their cores.

  6. Transmutation Analysis of Enriched Uranium and Deep Burn High Temperature Reactors

    SciTech Connect (OSTI)

    Michael A. Pope

    2012-07-01

    High temperature reactors (HTRs) have been under consideration for production of electricity, process heat, and for destruction of transuranics for decades. As part of the transmutation analysis efforts within the Fuel Cycle Research and Development (FCR&D) campaign, a need was identified for detailed discharge isotopics from HTRs for use in the VISION code. A conventional HTR using enriched uranium in UCO fuel was modeled having discharge burnup of 120 GWd/MTiHM. Also, a deep burn HTR (DB-HTR) was modeled burning transuranic (TRU)-only TRU-O2 fuel to a discharge burnup of 648 GWd/MTiHM. For each of these cases, unit cell depletion calculations were performed with SCALE/TRITON. Unit cells were used to perform this analysis using SCALE 6.1. Because of the long mean free paths (and migration lengths) of neutrons in HTRs, using a unit cell to represent a whole core can be non-trivial. The sizes of these cells were first set by using Serpent calculations to match a spectral index between unit cell and whole core domains. In the case of the DB-HTR, the unit cell which was arrived at in this way conserved the ratio of fuel to moderator found in a single block of fuel. In the conventional HTR case, a larger moderator-to-fuel ratio than that of a single block was needed to simulate the whole core spectrum. Discharge isotopics (for 500 nuclides) and one-group cross-sections (for 1022 nuclides) were delivered to the transmutation analysis team. This report provides documentation for these calculations. In addition to the discharge isotopics, one-group cross-sections were provided for the full list of 1022 nuclides tracked in the transmutation library.

  7. Irradiation Planning for Fully-Ceramic Micro-encsapsulated fuel in ATR at LWR-relevant conditions: year-end report on FY-2011

    SciTech Connect (OSTI)

    Abderrafi M. Ougouag; R. Sonat Sen; Michael A. Pope; Brian Boer

    2011-09-01

    This report presents the estimation of required ATR irradiation levels for the DB-FCM fuel design (fueled with Pu and MAs). The fuel and assembly designs are those considered in a companion report [R. S. Sen et al., FCR&D-2011- 00037 or INL/EXT-11-23269]. These results, pertaining to the DB-FCM fuel, are definitive in as much as the design of said fuel is definitive. In addition to the work performed, as required, for DB-FCM fuel, work has started in a preliminary fashion on single-cell UO2 and UN fuels. These latter activities go beyond the original charter of this project and although the corresponding work is incomplete, significant progress has been achieved. However, in this context, all that has been achieved is only preliminary because the corresponding fuel designs are neither finalized nor optimized. In particular, the UO2 case is unlikely to result in a viable fuel design if limited to enrichment at or under 20 weight % in U-235. The UN fuel allows reasonable length cycles and is likely to make an optimal design possible. Despite being limited to preliminary designs and offering only preliminary conclusions, the irradiation planning tasks for UO2 and UN fuels that are summarized in this report are useful to the overall goal of devising and deploying FCM-LWR fuel since the methods acquired and tested in this project and the overall procedure for planning will be available for planning tests for the finalized fuel design. Indeed, once the fuel design is finalized and the expected burnup level is determined, the methodology that has been assembled will allow the prompt finalization of the neutronic planning of the irradiation experiment and would provide guidance on the expected experimental performance of the fuel. Deviations from the expected behavior will then have to be analyzed and the outcome of the analysis may be corrections or modifications for the assessment models as well as, possibly, fuel design modifications, and perhaps even variation of experimental control for future experimental phases. Besides the prediction of irradiation times, preliminary work was carried out on other aspects of irradiation planning. In particular, a method for evaluating the interplay of depletion, material performance modeling and irradiation is identified by reference to a companion report. Another area that was addressed in a preliminary fashion is the identification and selection of a strategy for the physical and mechanical design of the irradiation experiments. The principal conclusion is that the similarity between the FCM fuel and the fuel compacts of the Next Generation Nuclear Plant prismatic design are strong enough to warrant using irradiation hardware designs and instrumentation adapted from the AGR irradiation tests. Modifications, if found necessary, will probably be few and small, except as pertains to the water environment and its implications on the use of SiC cladding or SiC matrix with no additional cladding.

  8. Tools and Methods for Hardening Communication Security of Energy Delivery Systems

    SciTech Connect (OSTI)

    Gadgil, Shrirang; Lin, Yow-Jian; Ghosh, Abhrajit; Samtani, Sunil; Kang, Jaewon; Siegell, Bruce; Kaul, Vikram; Unger, John; De Bruet, Andre; Martinez, Catherine; Vermeulen, Gerald; Rasche, Galen; Sternfeld, Scott; Berthier, Robin; Bobba, Rakesh; Campbell, Roy; Sanders, Williams; Lin, Yow-Jian

    2014-06-30

    This document summarizes the research and development work the TT Government Solutions (TTGS), d.b.a. Applied Communication Sciences (ACS), team performed for the Department of Energy Cybersecurity for Energy Delivery Systems (CEDS) program. It addresses the challenges in protecting critical grid control and data communication, including the identification of vulnerabilities and deficiencies of communication protocols commonly used in energy delivery systems (e.g., ICCP, DNP3, C37.118, C12.22), as well as the development of effective means to detect and prevent the exploitation of such vulnerabilities and deficiencies. The team consists of TT Government Solutions (TTGS), a leading provider of communications solutions that has extensive experience in commercializing communications solutions. TTGS also has deep cyber security research and development expertise supporting a variety of customers. University of Illinois at Urbana-Champaign (UIUC), a leader in the cyber security research for the power grid. UIUC brings unique experience in designing secure communication protocols to this project. Electric Power Research Institute (EPRI), an independent nonprofit that conducts research and development relating to the generation, delivery and use of electricity for the benefit of the public. EPRI brings to this effort its extensive technical expertise and its utility connections, with members representing more than 90 percent of the electricity generated and delivered in the United States. DTE Energy, the 10th largest electric utility in the US, which helps ensure that this project focuses on the needs of utilities and is rightly positioned to address the needs of the market place. We designed, developed, and demonstrated a modular and extensible ADEC-G (Agent-based, Distributed, Extensible Cybersecurity for the Grid) system for monitoring/detecting abnormal energy delivery systems (EDS) protocol usage and ensuring security coverage. Our approach consists of i. An online system with stateful model based checkers (SMBCs) that helps utilities monitor EDS protocol communication contexts and flag abnormal session behaviors; ii. An offline framework that security tool developers, operators, and auditors can use to verify security properties (leverages formal methods). The modular design of the ADEC-G online system enables its easy extension to cover added protocol features, to introduce new monitoring capabilities, and to apply to additional communication protocols. Its monitoring capabilities and user interface features also facilitate visibilities into ongoing communication patterns and quick grasps of suspicious communication activities. The offline framework provides a platform not only for rigorous validation of security coverage, but also for systematic refinement of checker design leveraging the counter traces generated by the model checking tool. The ADEC-G online monitoring/detection system and the offline validation framework are both operational and have been demonstrated in various settings. The ADEC-G online system has also been integrated into TTGS SecureSmart Managed Security Services offering and been employed to perform security assessment in a section of a utilitys operational network as well as in other Smart Grid security pilot project offerings. TTGS is also in discussions with several system integrators for incorporating the integrated SecureSmart Managed Security Services offering as the cyber security solution for the nce of Operations Technology (OT) and Information Technology (IT).

  9. Improving Ventilation and Saving Energy: Final Report on Indoor Environmental Quality and Energy Monitoring in Sixteen Relocatable Classrooms

    SciTech Connect (OSTI)

    Apte, Michael G.; Norman, Bourassa; Faulkner, David; Hodgson, Alfred T.; Hotchi, Toshfumi; Spears, Michael; Sullivan, Douglas P.; Wang, Duo

    2008-04-04

    An improved HVAC system for portable classrooms was specified to address key problems in existing units. These included low energy efficiency, poor control of and provision for adequate ventilation, and excessive acoustic noise. Working with industry, a prototype improved heat pump air conditioner was developed to meet the specification. A one-year measurement-intensive field-test of ten of these IHPAC systems was conducted in occupied classrooms in two distinct California climates. These measurements are compared to those made in parallel in side by side portable classrooms equipped with standard 10 SEER heat pump air conditioner equipment. The IHPAC units were found to work as designed, providing predicted annual energy efficiency improvements of about 36 percent to 42 percent across California's climate zones, relative to 10 SEER units. Classroom ventilation was vastly improved as evidenced by far lower indoor minus outdoor CO2 concentrations. TheIHPAC units were found to provide ventilation that meets both California State energy and occupational codes and the ASHRAE minimum ventilation requirements; the classrooms equipped with the 10 SEER equipment universally did not meet these targets. The IHPAC system provided a major improvement in indoor acoustic conditions. HVAC system generated background noise was reduced in fan-only and fan and compressor modes, reducing the nose levels to better than the design objective of 45 dB(A), and acceptable for additional design points by the Collaborative on High Performance Schools. The IHPAC provided superior ventilation, with indoor minus outdoor CO2 concentrations that showed that the Title 24 minimum ventilation requirement of 15 CFM per occupant was nearly always being met. The opposite was found in the classrooms utilizing the 10 SEER system, where the indoor minus outdoor CO2 concentrations frequently exceeded levels that reflect inadequate ventilation. Improved ventilation conditions in the IHPAC lead to effective removal of volatile organic compounds and aldehydes, on average lowering the concentrations by 57 percent relative to the levels in the 10 SEER classrooms. The average IHPAC to 10 SEER formaldehyde ratio was about 67 percent, indicating only a 33 percent reduction of this compound in indoor air. The IHPAC thermal control system provided less variability in occupied classroom temperature than the 10 SEER thermostats. The average room temperatures in all seasons tended to be slightly lower in the IHPAC classrooms, often below the lower limit of the ASHRAE 55 thermal comfort band. State-wide and national energy modeling provided conservative estimates of potential energy savings by use of the IHPAC system that would provide payback a the range of time far lower than the lifetime of the equipment. Assuming electricity costs of $0.15/kWh, the perclassroom range of savings is from about $85 to $195 per year in California, and about $89 to $250 per year in the U.S., depending upon the city. These modelsdid not include the non-energy benefits to the classrooms including better air quality and acoustic conditions that could lead to improved health and learning in school. Market connection efforts that were part of the study give all indication that this has been a very successful project. The successes include the specification of the IHPAC equipment in the CHPS portable classroom standards, the release of a commercial product based on the standards that is now being installed in schools around the U.S., and the fact that a public utility company is currently considering the addition of the technology to its customer incentive program. These successes indicate that the IHPAC may reach its potential to improve ventilation and save energy in classrooms.

  10. Rotation-Enabled 7-Degree of Freedom Seismometer for Geothermal Resource Development. Phase 1 Final Report

    SciTech Connect (OSTI)

    Pierson, Bob; Laughlin, Darren

    2013-10-29

    Under this Department of Energy (DOE) grant, A-Tech Corporation d.b.a. Applied Technology Associates (ATA), seeks to develop a seven-degree-of-freedom (7-DOF) seismic measurement tool for high-temperature geothermal applications. The Rotational-Enabled 7-DOF Seismometer includes a conventional tri-axial accelerometer, a conventional pressure sensor or hydrophone, and a tri-axial rotational sensor. The rotational sensing capability is novel, based upon ATA's innovative research in rotational sensing technologies. The geothermal industry requires tools for high-precision seismic monitoring of crack formation associated with Enhanced Geothermal System (EGS) stimulation activity. Currently, microseismic monitoring is conducted by deploying many seismic tools at different depth levels along a 'string' within drilled observation wells. Costs per string can be hundreds of thousands of dollars. Processing data from the spatial arrays of linear seismometers allows back-projection of seismic wave states. In contrast, a Rotational-Enabled 7-DOF Seismometer would simultaneously measure p-wave velocity, s-wave velocity, and incident seismic wave direction all from a single point measurement. In addition, the Rotational-Enabled 7-DOF Seismometer will, by its nature, separate p- and s-waves into different data streams, simplifying signal processing and facilitating analysis of seismic source signatures and geological characterization. By adding measurements of three additional degrees-of-freedom at each level and leveraging the information from this new seismic observable, it is likely that an equally accurate picture of subsurface seismic activity could be garnered with fewer levels per hole. The key cost savings would come from better siting of the well due to increased information content and a decrease in the number of confirmation wells drilled, also due to the increase in information per well. Improved seismic tools may also increase knowledge, understanding, and confidence, thus removing some current blocks to feasibility and significantly increasing access to potential geothermal sites. During the Phase 1 effort summarized in this final report, the ATA Team modeled and built two TRL 3 proof-of-concept test units for two competing rotational sensor technologies. The two competing technologies were based on ATA's angular rate and angular displacement measurement technologies; Angular rate: ATA's Magnetohydrodynamic Angular Rate Sensor (Seismic MHD); and Angular displacement: ATA's Low Frequency Improved Torsional Seismometer (LFITS). In order to down-select between these two technologies and formulate a go / no go decision, the ATA Team analyzed and traded scientific performance requirements and market constraints against sensor characteristics and components, acquiring field data where possible to validate the approach and publishing results from these studies of rotational technology capability. Based on the results of Phase 1, the ATA Team finds that the Seismic MHD (SMHD) technology is the best choice for enabling rotational seismometry and significant technical potential exists for micro-seismic monitoring using a downhole 7-DOF device based on the SMHD. Recent technical papers and field data confirm the potential of rotational sensing for seismic mapping, increasing confidence that cost-reduction benefits are achievable for EGS. However, the market for geothermal rotational sensing is small and undeveloped. As a result, this report recommends modifying the Phase 2 plan to focus on prototype development aimed at partnering with early adopters within the geothermal industry and the scientific research community. The highest public benefit will come from development and deployment of a science-grade SMHD rotational seismometer engineered for geothermal downhole conditions and an integrated test tool for downhole measurements at active geothermal test sites.

  11. Monitoring of Juvenile Yearling Chinook Salmon and Steelhead Survival and Passage at Bonneville Dam, Spring 2010

    SciTech Connect (OSTI)

    Ploskey, Gene R.; Faber, Derrek M.; Weiland, Mark A.; Carlson, Thomas J.

    2012-09-01

    The purpose of this study was to estimate the survival for yearling Chinook salmon and steelhead smolts during spring 2010 in a portion of the Columbia River that includes Bonneville Dam. The study estimated smolt survival from a virtual release at Bonneville Dam to a survival array 81 km downstream of Bonneville Dam. We also estimated median forebay residence time, median tailrace egress time, and spill passage efficiency (SPE), as required in the Columbia Basin Fish Accords. A single release design was used to estimate survival from Bonneville Dam to a primary array located 81 km downstream of Bonneville. The approach did not include a reference tailrace release. Releases of acoustic-tagged smolts above John Day Dam to Hood River contributed to the formation of virtual releases at a Bonneville Dam forebay entrance array and at the face of the dam. A total of 3,880 yearling Chinook salmon and 3,885 steelhead smolts were tagged and released in the investigation. The Juvenile Salmon Acoustic Telemetry System (JSATS) tag model number ATS-156dB, weighing 0.438 g in air, was used in this investigation.

  12. Monitoring of Juvenile Yearling Chinook Salmon and Steelhead Survival and Passage at Bonneville Dam, Spring 2010

    SciTech Connect (OSTI)

    Ploskey, Gene R.; Faber, Derrek M.; Weiland, Mark A.; Carlson, Thomas J.

    2011-02-01

    The purpose of this study was to estimate the survival for yearling Chinook salmon and steelhead smolts during spring 2010 in a portion of the Columbia River that includes Bonneville Dam. The study estimated smolt survival from a virtual release at Bonneville Dam to a survival array 81 km downstream of Bonneville Dam. We also estimated median forebay residence time, median tailrace egress time, and spill passage efficiency (SPE), as required in the Columbia Basin Fish Accords. A single release design was used to estimate survival from Bonneville Dam to a primary array located 81 km downstream of Bonneville. The approach did not include a reference tailrace release. Releases of acoustic-tagged smolts above John Day Dam to Hood River contributed to the formation of virtual releases at a Bonneville Dam forebay entrance array and at the face of the dam. A total of 3,880 yearling Chinook salmon and 3,885 steelhead smolts were tagged and released in the investigation. The Juvenile Salmon Acoustic Telemetry System (JSATS) tag model number ATS-156dB, weighing 0.438 g in air, was used in this investigation.

  13. Compliance Monitoring of Juvenile Yearling Chinook Salmon and Steelhead Survival and Passage at The Dalles Dam, Spring 2010

    SciTech Connect (OSTI)

    Carlson, Thomas J.; Skalski, John R.

    2010-10-01

    The purpose of this compliance study was to estimate dam passage survival of yearling Chinook salmon and steelhead smolts at The Dalles Dam during spring 2010. Under the 2008 Federal Columbia River Power System (FCRPS) Biological Opinion (BiOp), dam passage survival should be greater than or equal to 0.96 and estimated with a standard error (SE) less than or equal 0.015. The study also estimated smolt passage survival from the forebay boat-restricted zone (BRZ) to the tailrace BRZ at The Dalles Dam, as well as the forebay residence time, tailrace egress, and spill passage efficiency (SPE), as required in the Columbia Basin Fish Accords. A virtual/paired-release design was used to estimate dam passage survival at The Dalles Dam. The approach included releases of acoustic-tagged smolts above John Day Dam that contributed to the formation of a virtual release at the face of The Dalles Dam. A survival estimate from this release was adjusted by a paired release below The Dalles Dam. A total of 4,298 yearling Chinook salmon and 4,309 steelhead smolts were tagged and released in the investigation. The Juvenile Salmon Acoustic Telemetry System (JSATS) tag model number ATS-156dB, weighing 0.438 g in air, was used in this investigation. The dam passage survival results are summarized as follows: Yearling Chinook Salmon 0.9641 (SE = 0.0096) and Steelhead 0.9535 (SE = 0.0097).

  14. Global decarbonization strategies

    SciTech Connect (OSTI)

    Messner, S.

    1996-12-31

    The presentation covers a brief summary of the research activities of the Environmentally Compatible Energy Strategies Project (ECS) at IIASA. The overall research focuses on long-term global energy development and emissions of greenhouse gases (GHG). The ultimate goal is to analyze strategies that achieve decarbonization of global energy systems during the next century. The specific activities range from mitigation of GHG emissions to an integrated assessment of climate change. One focal point is the GHG mitigation technology inventory CO{sub 2}DB, which presently covers approximately 1,400 technologies related to energy and the greenhouse effect. Another integral part is the development of global energy and emissions scenarios, an effort involving a number of formal models to assess the implications. A large number of global scenarios for the next century has been developed, that could be grouped into three families. All of them include energy efficiency improvements and some degree of decarbonization in the world. They are based on different economic and technological development trajectories, and their emissions range from very high to a stabilization of atmospheric carbon dioxide emissions. The presentation will outline the salient characteristics of the three scenario families and provide some regional implications of these alternative futures.

  15. Determining NO{sub x} emissions from fossil fuel-fired sources

    SciTech Connect (OSTI)

    McNeel, A.

    1996-11-01

    To determine nitrogen oxides (NO{sub x}) emissions, the concentration of NO{sub x} within the stack gas must be determined. USEPA Reference Methods 7, 7A, 7C, 7D and/or 7E are the procedures to be used for NO{sub x} measurement as referenced in 40 CFR 60 subparts D, Da, Db and Dc - {open_quotes}Standards of performance for fossil fuel-fired steam generators...{open_quotes}. Depending upon the reason for determining NO{sub x} emissions, information in addition to NO{sub x} concentrations may be needed. Generally, USEPA Reference Methods 1 - 4 will be used to gather the additional data needed to satisfy the specific need for determining NO{sub x} emissions. The following text outlines the individual NO{sub x} sampling methodology, the relative costs of the reference method (RM) sampling, and the use of the resulting reference method data to calculate emissions in units of applicable standards.

  16. Performance of Transuranic-Loaded Fully Ceramic Micro-Encapsulated Fuel in LWRs Final Report, Including Void Reactivity Evaluation

    SciTech Connect (OSTI)

    Michael A. Pope; R. Sonat Sen; Brian Boer; Abderrafi M. Ougouag; Gilles Youinou

    2011-09-01

    The current focus of the Deep Burn Project is on once-through burning of transuranics (TRU) in light-water reactors (LWRs). The fuel form is called Fully-Ceramic Micro-encapsulated (FCM) fuel, a concept that borrows the tri-isotropic (TRISO) fuel particle design from high-temperature reactor technology. In the Deep Burn LWR (DB-LWR) concept, these fuel particles are pressed into compacts using SiC matrix material and loaded into fuel pins for use in conventional LWRs. The TRU loading comes from the spent fuel of a conventional LWR after 5 years of cooling. Unit cell and assembly calculations have been performed using the DRAGON-4 code to assess the physics attributes of TRU-only FCM fuel in an LWR lattice. Depletion calculations assuming an infinite lattice condition were performed with calculations of various reactivity coefficients performed at each step. Unit cells and assemblies containing typical UO2 and mixed oxide (MOX) fuel were analyzed in the same way to provide a baseline against which to compare the TRU-only FCM fuel. Then, assembly calculations were performed evaluating the performance of heterogeneous arrangements of TRU-only FCM fuel pins along with UO2 pins.

  17. Using phase information to enhance speckle noise reduction in the ultrasonic NDE of coarse grain materials

    SciTech Connect (OSTI)

    Lardner, Timothy; Gachagan, Anthony; Li, Minghui

    2014-02-18

    Materials with a coarse grain structure are becoming increasingly prevalent in industry due to their resilience to stress and corrosion. These materials are difficult to inspect with ultrasound because reflections from the grains lead to high noise levels which hinder the echoes of interest. Spatially Averaged Sub-Aperture Correlation Imaging (SASACI) is an advanced array beamforming technique that uses the cross-correlation between images from array sub-apertures to generate an image weighting matrix, in order to reduce noise levels. This paper presents a method inspired by SASACI to further improve imaging using phase information to refine focusing and reduce noise. A-scans from adjacent array elements are cross-correlated using both signal amplitude and phase to refine delay laws and minimize phase aberration. The phase-based and amplitude-based corrected images are used as inputs to a two-dimensional cross-correlation algorithm that will output a weighting matrix that can be applied to any conventional image. This approach was validated experimentally using a 5MHz array a coarse grained Inconel 625 step wedge, and compared to the Total Focusing Method (TFM). Initial results have seen SNR improvements of over 20dB compared to TFM, and a resolution that is much higher.

  18. Shot-noise-limited optical Faraday polarimetry with enhanced laser noise cancelling

    SciTech Connect (OSTI)

    Li, Jiaming; Luo, Le Carvell, Jeff; Cheng, Ruihua; Lai, Tianshu Wang, Zixin

    2014-03-14

    We present a shot-noise-limited measurement of optical Faraday rotations with sub-ten-nanoradian angular sensitivity. This extremely high sensitivity is achieved by using electronic laser noise cancelling and phase sensitive detection. Specially, an electronic laser noise canceller with a common mode rejection ratio of over 100?dB was designed and built for enhanced laser noise cancelling. By measuring the Faraday rotation of ambient air, we demonstrate an angular sensitivity of up to 9.010{sup ?9}?rad/?(Hz), which is limited only by the shot-noise of the photocurrent of the detector. To date, this is the highest angular sensitivity ever reported for Faraday polarimeters in the absence of cavity enhancement. The measured Verdet constant of ambient air, 1.93(3)10{sup ?9}rad/(G?cm) at 633?nm wavelength, agrees extremely well with the earlier experiments using high finesse optical cavities. Further, we demonstrate the applications of this sensitive technique in materials science by measuring the Faraday effect of an ultrathin iron film.

  19. Robust frequency diversity based algorithm for clutter noise reduction of ultrasonic signals using multiple sub-spectrum phase coherence

    SciTech Connect (OSTI)

    Gongzhang, R.; Xiao, B.; Lardner, T.; Gachagan, A.; Li, M.

    2014-02-18

    This paper presents a robust frequency diversity based algorithm for clutter reduction in ultrasonic A-scan waveforms. The performance of conventional spectral-temporal techniques like Split Spectrum Processing (SSP) is highly dependent on the parameter selection, especially when the signal to noise ratio (SNR) is low. Although spatial beamforming offers noise reduction with less sensitivity to parameter variation, phased array techniques are not always available. The proposed algorithm first selects an ascending series of frequency bands. A signal is reconstructed for each selected band in which a defect is present when all frequency components are in uniform sign. Combining all reconstructed signals through averaging gives a probability profile of potential defect position. To facilitate data collection and validate the proposed algorithm, Full Matrix Capture is applied on the austenitic steel and high nickel alloy (HNA) samples with 5MHz transducer arrays. When processing A-scan signals with unrefined parameters, the proposed algorithm enhances SNR by 20dB for both samples and consequently, defects are more visible in B-scan images created from the large amount of A-scan traces. Importantly, the proposed algorithm is considered robust, while SSP is shown to fail on the austenitic steel data and achieves less SNR enhancement on the HNA data.

  20. High power pulsed magnicon at 34-GHz

    SciTech Connect (OSTI)

    Nezhevenko, O.A.; Yakovlev, V.P.; Ganguly, A.K.; Hirshfield, J.L. [Omega-P Inc., 202008 Yale Station, New Haven, Connecticut 06520 (United States)

    1999-05-01

    A high efficiency, high power magnicon amplifier at 34.272 GHz has been designed as a radiation source to drive multi-TeV electron-positron linear colliders. Simulations show peak output power of 45 MW in a 1.5 microsecond wide pulse with an efficiency of 45{percent} and gain of 55 dB. The repetition rate is 10 Hz. The amplifier is a frequency tripler, or third harmonic amplifier, in that the output frequency of 34.272 GHz is three times the input drive frequency of 11.424 GHz. Thus the rotating TM{sub 110} modes in the drive cavity, 3 gain cavities and double decoupled penultimate cavities are resonant near 11.424 GHz; and the rotating TM{sub 310} mode in the output cavity is resonant at 34.272 GHz. A 500 kV, 200 A high area compression electron gun will provide a low emittance electron beam with a diameter of about 0.8 mm. A superconducting solenoid magnet will provide a magnetic field of 13 kG in the deflection system and 22 kG in the output cavity. A collector for the spent beam has also been designed. Detailed simulation results for the operation of the entire magnicon amplifier (gun, magnetic system, rf system and collector) will be given. {copyright} {ital 1999 American Institute of Physics.}

  1. Stepped-frequency continuous-wave microwave-induced thermoacoustic imaging

    SciTech Connect (OSTI)

    Nan, Hao Arbabian, Amin

    2014-06-02

    Microwave-induced thermoacoustic (TA) imaging combines the dielectric contrast of microwave imaging with the resolution of ultrasound imaging. Prior studies have only focused on time-domain techniques with short but powerful microwave pulses that require a peak output power in excess of several kilowatts to achieve sufficient signal-to-noise ratio (SNR). This poses safety concerns as well as to render the imager expensive and bulky with requiring a large vacuum radio frequency source. Here, we propose and demonstrate a coherent stepped-frequency continuous-wave (SFCW) technique for TA imaging which enables substantial improvements in SNR and consequently a reduction in peak power requirements for the imager. Constructive and destructive interferences between TA signals are observed and explained. Full coherency across microwave and acoustic domains, in the thermo-elastic response, is experimentally verified and this enables demonstration of coherent SFCW microwave-induced TA imaging. Compared to the pulsed technique, an improvement of 17?dB in SNR is demonstrated.

  2. Design Parameters of a Miniaturized Piezoelectric Underwater Acoustic Transmitter

    SciTech Connect (OSTI)

    Li, Huidong; Deng, Zhiqun; Yuan, Yong; Carlson, Thomas J.

    2012-07-02

    The Juvenile Salmon Acoustic Telemetry System (JSATS) project supported by the U.S. Army Corps of Engineers, Portland District, has yielded the smallest acoustic fish tag transmitter commercially available to date. In order to study even smaller fish populations and make the transmitter injectable by needles, the JSATS acoustic micro transmitter needs to be further downsized. As part of the transmitter downsizing effort some of the design parameters of the lead zirconate titanate (PZT) ceramic tube transducer in the transmitter were studied, including the type of PZT, the backing material, the necessary drive voltage, the transmitting bandwidth and the length of the transducer. It was found that, to satisfy the 156-dB source level requirement of JSATS, a square wave with a 10-volt amplitude is required to drive 'soft' PZT transducers. PZT-5H demonstrated the best source level performance. For Navy types I and II, 16 volts or 18 volts were needed. Ethylene-propylene-diene monomer (EPDM) closed-cell foam was found to be the backing material providing the highest source level. The effect of tube length on the source level is also demonstrated in this paper, providing quantitative information for downsizing of small piezoelectric transmitters.

  3. GTA Beamloss-Monitor System

    SciTech Connect (OSTI)

    Rose, C.R.; Fortgang, C.M.; Power, J.P.

    1992-01-01

    The GTA Beamless-Monitor System at Los Alamos National Laboratory has been designed to detect high-energy particle loss in the accelerator beamline and shut down the accelerator before any damage can occur. To do this, the Beamless-Monitor System measures the induced gamma radiation, from (p, {gamma}) reactions, at 15 selected points along the beamline, converts this measured radiation to electrical signals integrates and compares them to preset limits, and, in the event of an over-limit condition causes the Fast-Protect System to shut down the entire accelerator. The system dynamic range exceeds 70 dB which will enable experimenters to use the Beamless-Monitor System to help steer the beam as well as provide signals for a Fast-Protect System. The system response time is less than 7 {mu}s assuming a step-function, worst-case beam spill of 50 mA. The system resolution, based on the noise floor of the electronics is about 1.3 mRads/s. Production units have been built and meet the above specifications. The remainder of the system will be installed and tested later in 1992/1993 with the GTA accelerator. The ionization chamber sensitivity and response time are described in the paper.

  4. GTA Beamloss-Monitor System

    SciTech Connect (OSTI)

    Rose, C.R.; Fortgang, C.M.; Power, J.P.

    1992-09-01

    The GTA Beamless-Monitor System at Los Alamos National Laboratory has been designed to detect high-energy particle loss in the accelerator beamline and shut down the accelerator before any damage can occur. To do this, the Beamless-Monitor System measures the induced gamma radiation, from (p, {gamma}) reactions, at 15 selected points along the beamline, converts this measured radiation to electrical signals integrates and compares them to preset limits, and, in the event of an over-limit condition causes the Fast-Protect System to shut down the entire accelerator. The system dynamic range exceeds 70 dB which will enable experimenters to use the Beamless-Monitor System to help steer the beam as well as provide signals for a Fast-Protect System. The system response time is less than 7 {mu}s assuming a step-function, worst-case beam spill of 50 mA. The system resolution, based on the noise floor of the electronics is about 1.3 mRads/s. Production units have been built and meet the above specifications. The remainder of the system will be installed and tested later in 1992/1993 with the GTA accelerator. The ionization chamber sensitivity and response time are described in the paper.

  5. Methods And System Suppressing Clutter In A Gain-Block, Radar-Responsive Tag System

    DOE Patents [OSTI]

    Ormesher, Richard C. (Albuquerque, NM); Axline, Robert M. (Albuquerque, NM)

    2006-04-18

    Methods and systems reduce clutter interference in a radar-responsive tag system. A radar transmits a series of linear-frequency-modulated pulses and receives echo pulses from nearby terrain and from radar-responsive tags that may be in the imaged scene. Tags in the vicinity of the radar are activated by the radar's pulses. The tags receive and remodulate the radar pulses. Tag processing reverses the direction, in time, of the received waveform's linear frequency modulation. The tag retransmits the remodulated pulses. The radar uses a reversed-chirp de-ramp pulse to process the tag's echo. The invention applies to radar systems compatible with coherent gain-block tags. The invention provides a marked reduction in the strength of residual clutter echoes on each and every echo pulse received by the radar. SAR receiver processing effectively whitens passive-clutter signatures across the range dimension. Clutter suppression of approximately 14 dB is achievable for a typical radar system.

  6. Binary power multiplier for electromagnetic energy

    DOE Patents [OSTI]

    Farkas, Zoltan D. (203 Leland Ave., Menlo Park, CA 94025)

    1988-01-01

    A technique for converting electromagnetic pulses to higher power amplitude and shorter duration, in binary multiples, splits an input pulse into two channels, and subjects the pulses in the two channels to a number of binary pulse compression operations. Each pulse compression operation entails combining the pulses in both input channels and selectively steering the combined power to one output channel during the leading half of the pulses and to the other output channel during the trailing half of the pulses, and then delaying the pulse in the first output channel by an amount equal to half the initial pulse duration. Apparatus for carrying out each of the binary multiplication operation preferably includes a four-port coupler (such as a 3 dB hybrid), which operates on power inputs at a pair of input ports by directing the combined power to either of a pair of output ports, depending on the relative phase of the inputs. Therefore, by appropriately phase coding the pulses prior to any of the pulse compression stages, the entire pulse compression (with associated binary power multiplication) can be carried out solely with passive elements.

  7. Engineering Design Information System (EDIS)

    SciTech Connect (OSTI)

    Smith, P.S.; Short, R.D.; Schwarz, R.K.

    1990-11-01

    This manual is a guide to the use of the Engineering Design Information System (EDIS) Phase I. The system runs on the Martin Marietta Energy Systems, Inc., IBM 3081 unclassified computer. This is the first phase in the implementation of EDIS, which is an index, storage, and retrieval system for engineering documents produced at various plants and laboratories operated by Energy Systems for the Department of Energy. This manual presents on overview of EDIS, describing the system's purpose; the functions it performs; hardware, software, and security requirements; and help and error functions. This manual describes how to access EDIS and how to operate system functions using Database 2 (DB2), Time Sharing Option (TSO), Interactive System Productivity Facility (ISPF), and Soft Master viewing features employed by this system. Appendix A contains a description of the Soft Master viewing capabilities provided through the EDIS View function. Appendix B provides examples of the system error screens and help screens for valid codes used for screen entry. Appendix C contains a dictionary of data elements and descriptions.

  8. A compact, multichannel, and low noise arbitrary waveform generator

    SciTech Connect (OSTI)

    Govorkov, S.; Ivanov, B. I.; Novosibirsk State Technical University, K.Marx-Ave. 20, Novosibirsk 630092 ; Il'ichev, E.; Meyer, H.-G.

    2014-05-15

    A new type of high functionality, fast, compact, and easy programmable arbitrary waveform generator for low noise physical measurements is presented. The generator provides 7 fast differential waveform channels with a maximum bandwidth up to 200 MHz frequency. There are 6 fast pulse generators on the generator board with 78 ps time resolution in both duration and delay, 3 of them with amplitude control. The arbitrary waveform generator is additionally equipped with two auxiliary slow 16 bit analog-to-digital converters and four 16 bit digital-to-analog converters for low frequency applications. Electromagnetic shields are introduced to the power supply, digital, and analog compartments and with a proper filter design perform more than 110 dB digital noise isolation to the output signals. All the output channels of the board have 50 ? SubMiniature version A termination. The generator board is suitable for use as a part of a high sensitive physical equipment, e.g., fast read out and manipulation of nuclear magnetic resonance or superconducting quantum systems and any other application, which requires electromagnetic interference free fast pulse and arbitrary waveform generation.

  9. Superimposed coherent terahertz wave radiation from mono-energetically bunched multi-beam

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shin, Young -Min; Fermi National Accelerator Lab.

    2012-06-27

    Intense coherent radiation is obtained from multiple electron beams monochromatically bunched over the wide higher-order-mode (HOM) spectral band in the THz regime. The overmoded waveguide corrugated by dielectric-implanted staggered gratings superimposes evanescent waves emitted from the low energy electron beams. The dispersion and transmission simulations of the three-beam slow wave structure show that the first two fundamental modes (more » $$TE_{10}$$ and $$TE_{20}$$) are considerably suppressed ($$\\sim-50$$ dB) below the multi-beam resonating mode ($$TE_{30}$$) at the THz regime (0.8–1.24 THz). The theoretical calculations and particle-in-cell simulations show that with significantly higher interaction impedance and power growth rate radiation of the $$TE_{30}$$ mode is $$\\sim$$23 dBm and $$\\sim$$50 dBm stronger than the $$TE_{10}$$ and $$TE_{20}$$ modes around 1 THz, respectively. As a result, this highly selective HOM multi-beam interaction has potential applications for power THz sources and high intensity accelerators.« less

  10. Nonlinear dielectric thin films for active and electrically tunable microwave devices

    SciTech Connect (OSTI)

    Findikoglu, A.T.; Jia, Q.X.; Reagor, D.W.; Wu, X.D.

    1996-11-01

    The authors have prepared electrically tunable and active microwave devices incorporating (superconducting YBa{sub 2}Cu{sub 3}O{sub 7{minus}x})/(nonlinear dielectric SrTiO{sub 3}) or (normal metal Au)/(nonlinear dielectric Sr{sub 0.5}Ba{sub 0.5}TiO{sub 3}) bilayers. The dielectric layer thickness for these samples varied between 0.5 {micro}m and 2 {micro}m. The top electrode layer for each sample was patterned into a coplanar waveguide device structure. The authors have configures these devices as voltage-tunable resonators, voltage-tunable phase shifters, voltage-tunable mixers, and voltage-tunable filters. Under dc voltage bias, these prototype devices have exhibited up to 30% resonant frequency modulation, about 1{degree}/mm-GHz phase shift, more than 40 dB change in mixed microwave power, and fine-tunable symmetric filter profile with less than 2% bandwidth and more than 15% adaptive range.

  11. CENSUS OF BLUE STARS IN SDSS DR8

    SciTech Connect (OSTI)

    Scibelli, Samantha; Newberg, Heidi Jo; Carlin, Jeffrey L.; Yanny, Brian

    2015-01-01

    We present a census of the 12,060 spectra of blue objects ((g r){sub 0} < 0.25) in the Sloan Digital Sky Survey (SDSS) Data Release 8 (DR8). As part of the data release, all of the spectra were cross-correlated with 48 template spectra of stars, galaxies, and QSOs to determine the best match. We compared the blue spectra by eye to the templates assigned in SDSS DR8. 10,856 of the objects matched their assigned template, 170 could not be classified due to low signal-to-noise ratio, and 1034 were given new classifications. We identify 7458 DA white dwarfs, 1145 DB white dwarfs, 273 rarer white dwarfs (including carbon, DZ, DQ, and magnetic), 294 subdwarf O stars, 648 subdwarf B stars, 679 blue horizontal branch stars, 1026 blue stragglers, 13 cataclysmic variables, 129 white dwarf-M dwarf binaries, 36 objects with spectra similar to DO white dwarfs, 179, quasi-stellar objects (QSOs), and 10 galaxies. We provide two tables of these objects, sample spectra that match the templates, figures showing all of the spectra that were grouped by eye, and diagnostic plots that show the positions, colors, apparent magnitudes, proper motions, etc., for each classification. Future surveys will be able to use templates similar to stars in each of the classes we identify to automatically classify blue stars, including rare types.

  12. Interoperability of Materials Database Systems in Support of Nuclear Energy Development and Potential Applications for Fuel Cell Material Selection

    SciTech Connect (OSTI)

    Lin, Lianshan; Austin, Timothy; Ren, Weiju

    2015-01-01

    Materials database interoperability has been of great interest in recent years for information exchange in support of research and development (R&D). In response to data and knowledge sharing needs of the GenIV International Forum (GIF) for global collaboration in nuclear energy R&D, the European Commission JRC Institute for Energy and Transport (JRC-IET) and the Oak Ridge National Laboratory (ORNL) have established a materials database interoperability project that develops techniques for automated materials data exchange between systems hosted at the two institutes MatDB Online at JRC IET and the Gen IV Materials Handbook at ORNL, respectively. The work to enable automated exchange of data between the two systems leverages the XML data import and export functionalities of both systems in combination with recently developed standards for engineering materials data. The preliminary results of data communication between the two systems have demonstrated the feasibility and efficiency of materials database interoperability, which constructs an interoperation framework that can be seamlessly integrated into the high-throughput First Principles material databases and thus advance the discovery of novel materials in fuel cell applications.

  13. A micro seismometer based on molecular electronic transducer technology for planetary exploration

    SciTech Connect (OSTI)

    Huang, Hai; Tang, Rui; Carande, Bryce; Oiler, Jonathan; Zaitsev, Dmitri; Agafonov, Vadim; Yu, Hongyu; School of Earth and Space Exploration, Arizona State University, Tempe, Arizona 85287

    2013-05-13

    This letter describes an implementation of micromachined seismometer based on molecular electronic transducer (MET) technology. As opposed to a solid inertial mass, MET seismometer senses the movement of liquid electrolyte relative to fixed electrodes. The employment of micro-electro-mechanical systems techniques reduces the internal size of the sensing cell to 1{mu}m and improves the reproducibility of the device. For operating bias of 600 mV, a sensitivity of 809 V/(m/s{sup 2}) was measured under acceleration of 400{mu}g(g{identical_to}9.81m/s{sup 2}) at 0.32 Hz. A -115 dB (relative to (m/s{sup 2})/{radical}(Hz)) noise level at 1 Hz was achieved. This work develops an alternative paradigm of seismic sensing device with small size, high sensitivity, low noise floor, high shock tolerance, and independence of installation angle, which is promising for next generation seismometers for planetary exploration.

  14. Optical emission line monitor with background observation and cancellation

    DOE Patents [OSTI]

    Goff, D.R.; Notestein, J.E.

    1985-01-04

    A fiber optics based optical emission line monitoring system is provided in which selected spectral emission lines, such as the sodium D-line emission in coal combustion, may be detected in the presence of interferring background or blackbody radiation with emissions much greater in intensity than that of the emission line being detected. A bifurcated fiber optic light guide is adapted at the end of one branch to view the combustion light which is guided to a first bandpass filter, adapted to the common trunk end of the fiber. A portion of the light is reflected back through the common trunk portion of the fiber to a second bandpass filter adapted to the end of the other branch of the fiber. The first filter bandpass is centered at a wavelength corresponding to the emission line to be detected with a bandwidth of about three nanometers (nm). The second filter is centered at the same wavelength but having a width of about 10 nm. First and second light detectors are located to view the light passing through the first and second filters respectively. Thus, the second detector is blind to the light corresponding to the emission line of interest detected by the first detector and the difference between the two detector outputs is uniquely indicative of the intensity of only the combustion flame emission of interest. This instrument can reduce the effects of interfering blackbody radiation by greater than 20 dB.

  15. Optical emission line monitor with background observation and cancellation

    DOE Patents [OSTI]

    Goff, David R. (Star City, WV); Notestein, John E. (Morgantown, WV)

    1986-01-01

    A fiber optics based optical emission line monitoring system is provided in which selected spectral emission lines, such as the sodium D-line emission in coal combustion, may be detected in the presence of interferring background or blackbody radiation with emissions much greater in intensity than that of the emission line being detected. A bifurcated fiber optic light guide is adapted at the end of one branch to view the combustion light which is guided to a first bandpass filter, adapted to the common trunk end of the fiber. A portion of the light is reflected back through the common trunk portion of the fiber to a second bandpass filter adapted to the end of the other branch of the fiber. The first filter bandpass is centered at a wavelength corresponding to the emission line to be detected with a bandwidth of about three nanometers (nm). The second filter is centered at the same wavelength but having a width of about 10 nm. First and second light detectors are located to view the light passing through the first and second filters respectively. Thus, the second detector is blind to the light corresponding to the emission line of interest detected by the first detector and the difference between the two detector outputs is uniquely indicative of the intensity of only the combustion flame emission of interest. This instrument can reduce the effects of interferring blackbody radiation by greater than 20 dB.

  16. Test Program for High Efficiency Gas Turbine Exhaust Diffuser

    SciTech Connect (OSTI)

    Norris, Thomas R.

    2009-12-31

    This research relates to improving the efficiency of flow in a turbine exhaust, and thus, that of the turbine and power plant. The Phase I SBIR project demonstrated the technical viability of strutlets to control stalls on a model diffuser strut. Strutlets are a novel flow-improving vane concept intended to improve the efficiency of flow in turbine exhausts. Strutlets can help reduce turbine back pressure, and incrementally improve turbine efficiency, increase power, and reduce greenhouse gas emmission. The long-term goal is a 0.5 percent improvement of each item, averaged over the US gas turbine fleet. The strutlets were tested in a physical scale model of a gas turbine exhaust diffuser. The test flow passage is a straight, annular diffuser with three sets of struts. At the end of Phase 1, the ability of strutlets to keep flow attached to struts was demonstrated, but the strutlet drag was too high for a net efficiency advantage. An independently sponsored followup project did develop a highly-modified low-drag strutlet. In combination with other flow improving vanes, complicance to the stated goals was demonstrated for for simple cycle power plants, and to most of the goals for combined cycle power plants using this particular exhaust geometry. Importantly, low frequency diffuser noise was reduced by 5 dB or more, compared to the baseline. Appolicability to other diffuser geometries is yet to be demonstrated.

  17. Final Report 200 MW L-Band Annular Beam Klystron for Accelerators

    SciTech Connect (OSTI)

    Read, Michael; Ferguson, Patrick; Ives, Lawrence; Song, Liqun; Carlsten, Bruce; Fazio, Michael

    2009-02-11

    This program developed a 200 MW, 1.3 GHz, Annular Beam Klystron (ABK) for accelerator systems. An ABK provides lower impedance than a conventional klystron, making it possible to produce higher RF powers with lower voltages. With a higher power per unit, fewer klystrons would be required for a large accelerator. Lower voltage also simplifies and reduces the cost of the power supply system. Both features will significantly lower the cost of an RF system. This device operates at 475 kV. The klystron uses a magnetron injection gun producing 1100 A in one microsecond pulses. Power is extracted into fundamental rectangular waveguide through two output windows. The predicted gain is approximately 45 dB with estimated efficiency of 45%. The klystron was assembled, but no facility was available for testing. Consequently, no high power performance measurements are available. Because the assembled klystron is approximately 15 feet long, it was disassembled for storage. It can be reassembled should a use materialize.

  18. A 200 MHz 35 MW Multiple Beam Klystron for Accelerator Applications Final Report

    SciTech Connect (OSTI)

    R. Lawrence Ives; Michael Read; Patrick Ferguson; David Marsden

    2011-11-28

    Calabazas Creek Research, Inc. (CCR) performed initial development of a compact and reliable 35 MW, multiple beam klystron (MBK) at 200 MHz with a pulse length of 0.125 ms and a 30 Hz repetition rate. The device was targeted for acceleration and ionization cooling of a muon collider, but there are several other potential applications in this frequency range. The klystron uses multiple beams propagating in individual beam tunnels to reduce space charge and allow reduction in the accelerating voltage. This allows a significant reduction in length over a single beam source. More importantly this allows more efficient and less expensive power supplies. At 200 MHz, the interaction circuit for a single beam klystron would be more than six meters long to obtain 50% efficiency and 50 dB gain. This would require a beam voltage of approximately 400 kV and current of 251 A for a microperveance of 1.0. For an eight beam MBK with the same beam perveance, a three meter long interaction circuit achieves the same power and gain. Each beam operates at 142 kV and 70A. The Phase I demonstrated that this device could be fabricated with funding available in a Phase II program and could achieve the program specifications.

  19. Intelligent Data Management (IDM) for a Content-Based Image Retrieval System

    Energy Science and Technology Software Center (OSTI)

    2002-10-08

    With the availability of low-cost, high-performance computers, memory, and disk storage media, image libraries and content-based image retrieval (CBIR) technologies are becoming more prevalent. CBIR refers to technologies and systems that index large digital image libraries using image content derived from visual characteristics of the image such as color, texture and structure. Although large repositories can be readily assembled, the efficiency of these systems to retrieve the most relevant imagery is still a function ofmore » capacity and long-term storage. Due to the rapid growth in the size of image libraries and the high potential for data redundancy, the Intelligent Data Management (IDM) method has been developed to achieve a reduction in redundancy (IDM) method has been developed to achieve a reduction in redundancy that facilities either: (1) the long-term storage of the most information-rich image content (i.e., maintaining the same DB capacity but keeping data for a longer period of time), or (2) a reduction in the size of the repository capacity which results in improved performance (i.e., storage and retrieval efficiency) and reduced time for indexing.« less

  20. Synthesis and characterization of Cr-doped ZnO nanorod-array photocatalysts with improved activity

    SciTech Connect (OSTI)

    Chang, Chi-Jung Yang, Tsung-Lin; Weng, Yu-Ching

    2014-06-01

    Immobilized photocatalysts with high catalytic activity under UV light were prepared by growing Cr-doped ZnO nanorods on glass substrates by a hydrothermal method. The effects of Cr dopant on the surface texture, crystallinity, surface chemistry, and photoinduced charge separation and their relation with the photocatalytic degradation of Cr-doped ZnO were investigated by scanning electron microscopy, diffuse reflectance spectra, photoelectrochemical scanning electrochemical microscopy, and X-ray photoemission spectroscopy. Adding the appropriate amount of Cr dopant is a powerful way to enhance the separation of charge carriers in ZnO photocatalyst. The photocatalytic activity was improved due to the increase in surface oxygen vacancies, the separation of charge carriers, modification of the band gap, and the large surface area of the doped ZnO nanorod photocatalyst. - Graphical abstract: Photoinduced charge separation and its relation with the photocatalytic degradation activity of Cr-doped ZnO were investigated by photoelectrochemical scanning electrochemical microscopy. - Highlights: Cr dopant enhances separation of charge carries in ZnO nanorod photocatalyst. Photoinduced charge carries separation monitored by PEC-SECM. The higher the photocurrent is, the higher the photocatalytic activity is. Degradation of DB86 dye solutions under visible light finished within 50 min. Higher activity due to more oxygen vacancy, tuned band gap and more surface area.

  1. Potentiality of small DI diesel engines under consideration of emissions and noise control

    SciTech Connect (OSTI)

    Sugihara, K.; Matusi, Y.; Saegusa, S.

    1985-01-01

    The potentiality of direct injection (DI) diesel engines for passenger cars has been examined by comparing the characteristics of fuel consumption, exhaust emissions and noise levels between a turbocharged DI diesel engine and a turbocharged IDI diesel engine with the same displacement, 4 cylinders and 2 liters. It was observed that improved fuel consumption was obtained as the engine load increased, namely, 10 - 15% in the higher load range and 5 - 10% in the partial load range. In comparison to the IDI engine, the exhaust emissions of the DI engine tended to contain two or three times higher NOx and HC, and also about 30% higher particulates. Further, the noise levels of the DI engine were approximately 2 - 4 db (a) higher than those of the IDI engine. It was suggested from these results that in those countries which have stringent emission and noise regulations several years would be required to introduce small, high speed DI diesel engines for passenger cars to meet with these regulations.

  2. Interoperability of Materials Database Systems in Support of Nuclear Energy Development and Potential Applications for Fuel Cell Material Selection

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lin, Lianshan; Austin, Timothy; Ren, Weiju

    2015-01-01

    Materials database interoperability has been of great interest in recent years for information exchange in support of research and development (R&D). In response to data and knowledge sharing needs of the GenIV International Forum (GIF) for global collaboration in nuclear energy R&D, the European Commission JRC Institute for Energy and Transport (JRC-IET) and the Oak Ridge National Laboratory (ORNL) have established a materials database interoperability project that develops techniques for automated materials data exchange between systems hosted at the two institutes MatDB Online at JRC IET and the Gen IV Materials Handbook at ORNL, respectively. The work to enable automatedmoreexchange of data between the two systems leverages the XML data import and export functionalities of both systems in combination with recently developed standards for engineering materials data. The preliminary results of data communication between the two systems have demonstrated the feasibility and efficiency of materials database interoperability, which constructs an interoperation framework that can be seamlessly integrated into the high-throughput First Principles material databases and thus advance the discovery of novel materials in fuel cell applications.less

  3. Polymorphism of the MHC class II Eb gene determines the protection against collagen-induced arthritis

    SciTech Connect (OSTI)

    Gonzalez-Gay, M.A.; Zanelli, E.; Krco, C.J.

    1995-05-01

    Collagen-induced arthritis (CIA) is an animal model of auto immune polyarthritis, sharing similarities with rheumatoid arthritis (RA). Paradoxally, susceptibility to mouse CIA is controlled by the H2A loci (DQ homologous) while RA is linked to HLA.DR genes (H2E homologous). We recently showed that the E{beta}{sup d} molecule prevents CIA development in susceptible H2{sup q} mice. We addressed the question of whether H2Eb polymorphism will influence CIA incidence as HLA.DRB1 polymorphism does in RA. In F{sub 1} mice, only H2Eb{sup d} and H2Eb{sup s} molecules showed protection. Using recombinant B10.RDD (Eb{sup d/b}) mice, we found that CIA protection was mediated by the first domain of the E{beta}{sup d} molecule. Using peptides covering the third hypervariable region of the E{beta} chain, we found a perfect correlation between presentation of E{beta} peptides by the H2A{sup q} molecule and protection on CIA. Therefore, the mechanism by which H2Eb protects against CIA seems to rely on the affinity of E{beta} peptides for the H2A{sup q} molecule. 35 refs., 2 figs., 3 tabs.

  4. Phasing of Debuncher Stochastic Cooling Transverse Systems

    SciTech Connect (OSTI)

    Pasquinelli, Ralph; /Fermilab

    2000-03-09

    With the higher frequency of the cooling systems in the Debuncher, a modified method of making transfer functions has been developed for transverse systems. (Measuring of the momentum systems is unchanged.) Speed in making the measurements is critical, as the beam tends to decelerate due to vacuum lifetime. In the 4-8 GHz band, the harmonics in the Debuncher are 6,700 to 13,400 times the revolution frequency. Every Hertz change in revolution frequency is multiplied by this harmonic number and becomes a frequency measurement error, which is an appreciable percent of the momentum width of the beam. It was originally thought that a momentum cooling system would be phased first so that the beam could be kept from drifting in revolution frequency. As it turned out, the momentum cooling was so effective (even with the gain turned down) that the momentum width normalized to fo became less than one Hertz on the Schottky pickup. A beam this narrow requires very precise measurement of tune and revolution frequency. It was difficult to get repeatable results. For initial measuring of the transverse arrays, relative phase and delay is all that is required, so the measurement settings outlined below will suffice. Once all input and output arrays are phased, a more precise measurement of all pickups to all kickers can be done with more points and both upper and lower side bands, as in figure 1. Settings on the network analyzer were adjusted for maximum measurement speed. Data is not analyzed until a complete set of measurements is taken. Start and stop frequencies should be chosen to be just slightly wider than the band being measured. For transverse systems, select betatron USB for the measurement type. This will make the measurement two times faster. Select 101 for the number of points, sweep time of 5 seconds, IF bandwidth 30 Hz, averages = 1. It is important during the phasing to continually measure the revolution frequency and beam width of the beam for transverse systems. Beam width is defined as the 3 dB bandwidth of the momentum Schottky divided by 127 (the harmonic of the Schottky pickup in the Debuncher.) Every three to five minutes, the beam drifts enough to make a significant change in the data. Knowing the revolution frequency and beam width to 0.5 Hz is important. If the beam width exceeds 10 Hz, the quality of the measurement will be impaired. Large beam widths can be caused by excessive forward proton beam current. There are also signs that the front-end amplifiers saturate with beam currents above several hundred microamps. The cooling systems were designed to be very sensitive, (that's why the front end is at liquid helium temperature) so a hundred microamps will go a long way. It should be possible to phase the systems with Pbars as a signal to noise ratio of 30 dB was observed with 100 microamps of beam current.

  5. Hydrogen interaction kinetics of Ge dangling bonds at the Si{sub 0.25}Ge{sub 0.75}/SiO{sub 2} interface

    SciTech Connect (OSTI)

    Stesmans, A. Nguyen Hoang, T.; Afanas'ev, V. V.

    2014-07-28

    The hydrogen interaction kinetics of the GeP{sub b1} defect, previously identified by electron spin resonance (ESR) as an interfacial Ge dangling bond (DB) defect occurring in densities ?7??10{sup 12}?cm{sup ?2} at the SiGe/SiO{sub 2} interfaces of condensation grown (100)Si/a-SiO{sub 2}/Ge{sub 0.75}Si{sub 0.25}/a-SiO{sub 2} structures, has been studied as function of temperature. This has been carried out, both in the isothermal and isochronal mode, through defect monitoring by capacitance-voltage measurements in conjunction with ESR probing, where it has previously been demonstrated the defects to operate as negative charge traps. The work entails a full interaction cycle study, comprised of analysis of both defect passivation (pictured as GeP{sub b1}-H formation) in molecular hydrogen (?1?atm) and reactivation (GeP{sub b1}-H dissociation) in vacuum. It is found that both processes can be suitably described separately by the generalized simple thermal (GST) model, embodying a first order interaction kinetics description based on the basic chemical reactions GeP{sub b1}?+?H{sub 2}???GeP{sub b1}H?+?H and GeP{sub b1}H???GeP{sub b1}?+?H, which are found to be characterized by the average activation energies E{sub f}?=?1.44??0.04?eV and E{sub d}?=?2.23??0.04?eV, and attendant, assumedly Gaussian, spreads ?E{sub f}?=?0.20??0.02?eV and ?E{sub d}?=?0.15??0.02?eV, respectively. The substantial spreads refer to enhanced interfacial disorder. Combination of the separately inferred kinetic parameters for passivation and dissociation results in the unified realistic GST description that incorporates the simultaneous competing action of passivation and dissociation, and which is found to excellently account for the full cycle data. For process times t{sub a}???35?min, it is found that even for the optimum treatment temperature ?380?C, only ?60% of the GeP{sub b1} system can be electrically silenced, still far remote from device grade level. This ineffectiveness is concluded, for the major part, to be a direct consequence of the excessive spreads in the activation energies, ?23 times larger than for the Si DB P{sub b} defects at the standard thermal (111)Si/SiO{sub 2} interface which may be easily passivated to device grade levels, strengthened by the reduced difference between the average E{sub f} and E{sub d} values. Exploring the guidelines of the GST model indicates that passivation can be improved by decreasing T{sub an} and attendant enlarging of t{sub a}, however, at best still leaving ?2% defects unpassivated even for unrealistically extended anneal times. The average dissociation energy E{sub d}???2.23?eV, concluded as representing the GeP{sub b1}-H bond strength, is found to be smaller than the SiP{sub b}-H one, characterized by E{sub d}???2.83?eV. An energy deficiency is encountered regarding the energy sum rule inherent to the GST-model, the origin of which is substantiated to lie with a more complex nature of the forward passivation process than basically depicted in the GST model. The results are discussed within the context of theoretical considerations on the passivation of interfacial Ge DBs by hydrogen.

  6. Hydroacoustic Evaluation of Juvenile Salmonid Passage and Distribution at Lookout Point Dam, 2010

    SciTech Connect (OSTI)

    Khan, Fenton; Johnson, Gary E.; Royer, Ida M.; Hughes, James S.; Fischer, Eric S.; Trott, Donna M.; Ploskey, Gene R.

    2012-05-31

    Pacific Northwest National Laboratory evaluated juvenile salmonid passage and distribution at Lookout Point Dam (LOP) on the Middle Fork Willamette River for the U.S. Army Corps of Engineers, Portland District (USACE), to provide data to support decisions on long-term measures to enhance downstream passage at LOP and others dams in USACE's Willamette Valley Project. This study was conducted in response to the listing of Upper Willamette River Spring Chinook salmon (Oncorhynchus tshawytscha) and Upper Willamette River steelhead (O. mykiss) as threatened under the Endangered Species Act. We conducted a hydroacoustic evaluation of juvenile salmonid passage and distribution at LOP during February 2010 through January 2011. Findings from this 1 year of study should be applied carefully because annual variation can be expected due to variability in adult salmon escapement, egg-to-fry and fry-to-smolt survival rates, reservoir rearing and predation, dam operations, and weather. Fish passage rates for smolt-size fish (> {approx}90 mm and < 300 mm) were highest during December-January and lowest in mid-summer through early fall. Passage peaks were also evident in early spring, early summer, and late fall. During the entire study period, an estimated total of 142,463 fish {+-} 4,444 (95% confidence interval) smolt-size fish passed through turbine penstock intakes. Of this total, 84% passed during December-January. Run timing for small-size fish ({approx}65-90 mm) peaked (702 fish) on December 18. Diel periodicity of smolt-size fish showing crepuscular peaks was evident in fish passage into turbine penstock intakes. Relatively few fish passed into the Regulating Outlets (ROs) when they were open in summer (2 fish/d) and winter (8 fish/d). Overall, when the ROs were open, RO efficiency (RO passage divided by total project passage) was 0.004. In linear regression analyses, daily fish passage (turbines and ROs combined) for smolt-size fish was significantly related to project discharge (P<0.001). This relationship was positive, but there was no relationship between total project passage and forebay elevation (P=0.48) or forebay elevation delta, i.e., day-to-day change in forebay elevation (P=0.16). In multiple regression analyses, a relatively parsimonious model was selected that predicted the observed data well. The multiple regression model indicates a positive trend between expected daily fish passage and each of the three variables in the model-Julian day, log(discharge), and log(abs(forebay delta)); i.e., as any of the environmental variables increase, expected daily fish passage increases. For vertical distribution of fish at the face of the dam, fish were surface-oriented with 62%-80% occurring above 10 m deep. The highest percentage of fish (30%-60%) was found between 5-10-m-deep. During spring and summer, mean target strengths for the analysis periods ranged from -44.2 to -42.1 dB. These values are indicative of yearling-sized juvenile salmon. In contrast, mean target strengths in fall and winter were about -49.0 dB, which are representative of subyearling-sized fish. The high-resolution spatial and temporal data reported herein provide detailed information about vertical, horizontal, diel, daily, and seasonal fish passage rates and distributions at LOP from March 2010 through January 2011. This information will support management decisions on design and development of surface passage and collection devices to help restore Chinook salmon populations in the Middle Fork Willamette River watershed above LOP.

  7. High speed sampler and demultiplexer

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1995-01-01

    A high speed sampling demultiplexer based on a plurality of sampler banks, each bank comprising a sample transmission line for transmitting an input signal, a strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates at respective positions along the sample transmission line for sampling the input signal in response to the strobe signal. Strobe control circuitry is coupled to the plurality of banks, and supplies a sequence of bank strobe signals to the strobe transmission lines in each of the plurality of banks, and includes circuits for controlling the timing of the bank strobe signals among the banks of samplers. Input circuitry is included for supplying the input signal to be sampled to the plurality of sample transmission lines in the respective banks. The strobe control circuitry can repetitively strobe the plurality of banks of samplers such that the banks of samplers are cycled to create a long sample length. Second tier demultiplexing circuitry is coupled to each of the samplers in the plurality of banks. The second tier demultiplexing circuitry senses the sample taken by the corresponding sampler each time the bank in which the sampler is found is strobed. A plurality of such samples can be stored by the second tier demultiplexing circuitry for later processing. Repetitive sampling with the high speed transient sampler induces an effect known as "strobe kickout". The sample transmission lines include structures which reduce strobe kickout to acceptable levels, generally 60 dB below the signal, by absorbing the kickout pulses before the next sampling repetition.

  8. Sources and levels of ambient ocean sound near the antarctic peninsula

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dziak, Robert P.; Bohnenstiehl, DelWayne R.; Stafford, Kathleen M.; Matsumoto, Haruyoshi; Park, Minkyu; Lee, Won Sang; Fowler, Matt J.; Lau, Tai-Kwan; Haxel, Joseph H.; Mellinger, David K.; et al

    2015-04-14

    Arrays of hydrophones were deployed within the Bransfield Strait and Scotia Sea (Antarctic Peninsula region) from 2005 to 2009 to record ambient ocean sound at frequencies of up to 125 and 500 Hz. Icequakes, which are broadband, short duration signals derived from fracturing of large free-floating icebergs, are a prominent feature of the ocean soundscape. Icequake activity peaks during austral summer and is minimum during winter, likely following freeze-thaw cycles. Iceberg grounding and rapid disintegration also releases significant acoustic energy, equivalent to large-scale geophysical events. Overall ambient sound levels can be as much as ~10–20 dB higher in the open,more » deep ocean of the Scotia Sea compared to the relatively shallow Bransfield Strait. Noise levels become lowest during the austral winter, as sea-ice cover suppresses wind and wave noise. Ambient noise levels are highest during austral spring and summer, as surface noise, ice cracking and biological activity intensifies. Vocalizations of blue (Balaenoptera musculus) and fin (B. physalus) whales also dominate the long-term spectra records in the 15–28 and 89 Hz bands. Blue whale call energy is a maximum during austral summer-fall in the Drake Passage and Bransfield Strait when ambient noise levels are a maximum and sea-ice cover is a minimum. Fin whale vocalizations were also most common during austral summer-early fall months in both the Bransfield Strait and Scotia Sea. The hydrophone data overall do not show sustained anthropogenic sources (ships and airguns), likely due to low coastal traffic and the typically rough weather and sea conditions of the Southern Ocean.« less

  9. Breckinridge Project, initial effort

    SciTech Connect (OSTI)

    none,

    1982-01-01

    The project cogeneration plant supplies electric power, process steam and treated boiler feedwater for use by the project plants. The plant consists of multiple turbine generators and steam generators connected to a common main steam header. The major plant systems which are required to produce steam, electrical power and treated feedwater are discussed individually. The systems are: steam, steam generator, steam generator fuel, condensate and feedwater deaeration, condensate and blowdown collection, cooling water, boiler feedwater treatment, coal handling, ash handling (fly ash and bottom ash), electrical, and control system. The plant description is based on the Phase Zero design basis established for Plant 31 in July of 1980 and the steam/condensate balance as presented on Drawing 31-E-B-1. Updating of steam requirements as more refined process information becomes available has generated some changes in the steam balance. Boiler operation with these updated requirements is reflected on Drawing 31-D-B-1A. The major impact of updating has been that less 600 psig steam generated within the process units requires more extraction steam from the turbine generators to close the 600 psig steam balance. Since the 900 psig steam generation from the boilers was fixed at 1,200,000 lb/hr, the additional extraction steam required to close the 600 psig steam balance decreased the quantity of electrical power available from the turbine generators. In the next phase of engineering work, the production of 600 psig steam will be augmented by increasing convection bank steam generation in the Plant 3 fired heaters by 140,000 to 150,000 lb/hr. This modification will allow full rated power generation from the turbine generators.

  10. High speed sampler and demultiplexer

    DOE Patents [OSTI]

    McEwan, T.E.

    1995-12-26

    A high speed sampling demultiplexer based on a plurality of sampler banks, each bank comprising a sample transmission line for transmitting an input signal, a strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates at respective positions along the sample transmission line for sampling the input signal in response to the strobe signal. Strobe control circuitry is coupled to the plurality of banks, and supplies a sequence of bank strobe signals to the strobe transmission lines in each of the plurality of banks, and includes circuits for controlling the timing of the bank strobe signals among the banks of samplers. Input circuitry is included for supplying the input signal to be sampled to the plurality of sample transmission lines in the respective banks. The strobe control circuitry can repetitively strobe the plurality of banks of samplers such that the banks of samplers are cycled to create a long sample length. Second tier demultiplexing circuitry is coupled to each of the samplers in the plurality of banks. The second tier demultiplexing circuitry senses the sample taken by the corresponding sampler each time the bank in which the sampler is found is strobed. A plurality of such samples can be stored by the second tier demultiplexing circuitry for later processing. Repetitive sampling with the high speed transient sampler induces an effect known as ``strobe kickout``. The sample transmission lines include structures which reduce strobe kickout to acceptable levels, generally 60 dB below the signal, by absorbing the kickout pulses before the next sampling repetition. 16 figs.

  11. Report on the third international workshop on chromosome 9

    SciTech Connect (OSTI)

    Povey, S.; White, J.A.; Armour, J.

    1994-04-01

    The Third International Workshop on human chromosome 9 was held at Queens` College, Cambridge 9-11 April, 1994. The meeting was attended by 74 participants from 12 countries. On the morning of 12 April a satellite meeting was held on Tuberous Sclerosis, and because of its relevance to chromosome 9 a summary of this meeting is also presented within this report. The division consisted of a group with global interests, four regional groups 9p, 9q11-q21, 9q22-q33 and 9q33-qter, a group interested in mapping putative suppressor genes in ovarian and bladder cancer and a comparative mapping group. There was also discussion of resources, both physical and informatic. The amount of information on chromosome 9 has increased greatly in the past two years and it is clear that the integration of different types of information and the display of such information is an urgent problem. At this meeting two possible systems were explored, SIGMA and 1db. As described in the global group report an attempt was made to enter all mapping information into SIGMA, a program developed by Michael Cinkosky at Los Alamos. Within the text of this report a name without a date refers to an abstract at this meeting. A name with a date refers to a publication listed in the references and these are in general confined to very recent or {open_quote}in press{close_quote} references. A verbal communication at the meeting is identified as a personal communication. For authoritative referencing of published information and also for all primer sequences (except a few actually listed in the abstracts) the reader should consult GDB. The proceedings of the two previous workshops have been published and are listed in the references. It was decided that a fourth workshop would be held in about a year`s time. Dr. Margaret Pericak-Vance offered to host this at Duke University, North Carolina.

  12. TOWARD A SPECTROSCOPIC CENSUS OF WHITE DWARFS WITHIN 40 pc OF THE SUN

    SciTech Connect (OSTI)

    Limoges, M.-M.; Bergeron, P.; Lepine, S. E-mail: bergeron@astro.umontreal.ca

    2013-05-15

    We present the preliminary results of a survey aimed at significantly increasing the range and completeness of the local census of spectroscopically confirmed white dwarfs. The current census of nearby white dwarfs is reasonably complete only to about 20 pc of the Sun, a volume that includes around 130 white dwarfs, a sample too small for detailed statistical analyses. This census is largely based on follow-up investigations of stars with very large proper motions. We describe here the basis of a method that will lead to a catalog of white dwarfs within 40 pc of the Sun and north of the celestial equator, thus increasing by a factor of eight the extent of the northern sky census. White dwarf candidates are identified from the SUPERBLINK proper motion database, allowing us to investigate stars down to a proper motion limit {mu} > 40 mas yr{sup -1}, while minimizing the kinematic bias for nearby objects. The selection criteria and distance estimates are based on a combination of color-magnitude and reduced proper motion diagrams. Our follow-up spectroscopic observation campaign has so far uncovered 193 new white dwarfs, among which we identify 127 DA (including 9 DA+dM and 4 magnetic), 1 DB, 56 DC, 3 DQ, and 6 DZ stars. We perform a spectroscopic analysis on a subsample of 84 DAs, and provide their atmospheric parameters. In particular, we identify 11 new white dwarfs with spectroscopic distances within 25 pc of the Sun, including five candidates to the D < 20 pc subset.

  13. Evaluation of high-level clouds in cloud resolving model simulations with ARM and KWAJEX observations

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zheng; Muhlbauer, Andreas; Ackerman, Thomas

    2015-11-05

    In this paper, we evaluate high-level clouds in a cloud resolving model during two convective cases, ARM9707 and KWAJEX. The simulated joint histograms of cloud occurrence and radar reflectivity compare well with cloud radar and satellite observations when using a two-moment microphysics scheme. However, simulations performed with a single moment microphysical scheme exhibit low biases of approximately 20 dB. During convective events, two-moment microphysical overestimate the amount of high-level cloud and one-moment microphysics precipitate too readily and underestimate the amount and height of high-level cloud. For ARM9707, persistent large positive biases in high-level cloud are found, which are not sensitivemore » to changes in ice particle fall velocity and ice nuclei number concentration in the two-moment microphysics. These biases are caused by biases in large-scale forcing and maintained by the periodic lateral boundary conditions. The combined effects include significant biases in high-level cloud amount, radiation, and high sensitivity of cloud amount to nudging time scale in both convective cases. The high sensitivity of high-level cloud amount to the thermodynamic nudging time scale suggests that thermodynamic nudging can be a powerful ‘‘tuning’’ parameter for the simulated cloud and radiation but should be applied with caution. The role of the periodic lateral boundary conditions in reinforcing the biases in cloud and radiation suggests that reducing the uncertainty in the large-scale forcing in high levels is important for similar convective cases and has far reaching implications for simulating high-level clouds in super-parameterized global climate models such as the multiscale modeling framework.« less

  14. Curation and Computational Design of Bioenergy-Related Metabolic Pathways

    SciTech Connect (OSTI)

    Karp, Peter D.

    2014-09-12

    Pathway Tools is a systems-biology software package written by SRI International (SRI) that produces Pathway/Genome Databases (PGDBs) for organisms with a sequenced genome. Pathway Tools also provides a wide range of capabilities for analyzing predicted metabolic networks and user-generated omics data. More than 5,000 academic, industrial, and government groups have licensed Pathway Tools. This user community includes researchers at all three DOE bioenergy centers, as well as academic and industrial metabolic engineering (ME) groups. An integral part of the Pathway Tools software is MetaCyc, a large, multiorganism database of metabolic pathways and enzymes that SRI and its academic collaborators manually curate. This project included two main goals: I. Enhance the MetaCyc content of bioenergy-related enzymes and pathways. II. Develop computational tools for engineering metabolic pathways that satisfy specified design goals, in particular for bioenergy-related pathways. In part I, SRI proposed to significantly expand the coverage of bioenergy-related metabolic information in MetaCyc, followed by the generation of organism-specific PGDBs for all energy-relevant organisms sequenced at the DOE Joint Genome Institute (JGI). Part I objectives included: 1: Expand the content of MetaCyc to include bioenergy-related enzymes and pathways. 2: Enhance the Pathway Tools software to enable display of complex polymer degradation processes. 3: Create new PGDBs for the energy-related organisms sequenced by JGI, update existing PGDBs with new MetaCyc content, and make these data available to JBEI via the BioCyc website. In part II, SRI proposed to develop an efficient computational tool for the engineering of metabolic pathways. Part II objectives included: 4: Develop computational tools for generating metabolic pathways that satisfy specified design goals, enabling users to specify parameters such as starting and ending compounds, and preferred or disallowed intermediate compounds. The pathways were to be generated using metabolic reactions from a reference database (DB). 5: Develop computational tools for ranking the pathways generated in objective (4) according to their optimality. The ranking criteria include stoichiometric yield, the number and cost of additional inputs and the cofactor compounds required by the pathway, pathway length, and pathway energetics. 6: Develop tools for visualizing generated pathways to facilitate the evaluation of a large space of generated pathways.

  15. Final Scientific/Technical Report. A closed path methane and water vapor gas analyzer

    SciTech Connect (OSTI)

    Liukang, Xu; Dayle, McDermitt; Tyler, Anderson; Brad, Riensche; Anatoly, Komissarov; Julie, Howe

    2012-05-01

    Robust, economical, low-power and reliable closed-path methane (CH4), carbon dioxide (CO2), and water vapor (H2O) analyzers suitable for long-term measurements are not readily available commercially. Such analyzers are essential for quantifying the amount of CH4 and CO2 released from various ecosystems (wetlands, rice paddies, forests, etc.) and other surface contexts (e.g. landfills, animal husbandry lots, etc.), and for understanding the dynamics of the atmospheric CH4 and CO2 budget and their impact on climate change and global warming. The purpose of this project is to develop a closed-path methane, carbon dioxide gas and water vapor analyzer capable of long-term measurements in remote areas for global climate change and environmental research. The analyzer will be capable of being deployed over a wide range of ecosystems to understand methane and carbon dioxide exchange between the atmosphere and the surface. Measurements of methane and carbon dioxide exchange need to be made all year-round with limited maintenance requirements. During this Phase II effort, we successfully completed the design of the electronics, optical bench, trace gas detection method and mechanical infrastructure. We are using the technologies of two vertical cavity surface emitting lasers, a multiple-pass Herriott optical cell, wavelength modulation spectroscopy and direct absorption to measure methane, carbon dioxide, and water vapor. We also have designed the instrument application software, Field Programmable Gate Array (FPGA), along with partial completion of the embedded software. The optical bench has been tested in a lab setting with very good results. Major sources of optical noise have been identified and through design, the optical noise floor is approaching -60dB. Both laser modules can be temperature controlled to help maximize the stability of the analyzer. Additionally, a piezo electric transducer has been utilized to randomize the noise introduced from potential etalons. It is expected that all original specifications contained within the initial proposal will be met. We are currently in the beginning stages of assembling the first generation prototypes and finalizing the remaining design elements. The first prototypes will initially be tested in our environmental calibration chamber in which specific gas concentrations, temperature and humidity levels can be controlled. Once operation in this controlled setting is verified, the prototypes will be deployed at LI-COR?¢????s Experimental Research Station (LERS). Deployment at the LERS site will test the instrument?¢????s robustness in a real-world situation.

  16. The Study and Implementation of Electrically Small Printed Antennas for an Integrated Transceiver Design

    SciTech Connect (OSTI)

    Speer, Pete

    2009-04-15

    This work focuses on the design and evaluation of the inverted-F, meandering-monopole, and loop antenna geometries. These printed antennas are studied with the goal of identifying which is suitable for use in a miniaturized transceiver design and which has the ability to provide superior performance using minimal Printed Circuit Board (PCB) space. As a result, the main objective is to characterize tradeoffs and identify which antenna provides the best compromise among volume, bandwidth and efficiency. For experimentation purposes, three types of meandering-monopole antenna are examined resulting in five total antennas for the study. The performance of each antenna under study is evaluated based upon return loss, operational bandwidth, and radiation pattern characteristics. For our purposes, return loss is measured using the S11-port reflection coefficient which helps to characterize how well the small antenna is able to be efficiently fed. Operational bandwidth is measured as the frequency range over which the antenna maintains 2:1 Voltage Standing Wave Ratio (VSWR) or equivalently has 10-dB return loss. Ansoft High Frequency Structure Simulator (HFSS) is used to simulate expected resonant frequency, bandwidth, VSWR, and radiation pattern characteristics. Ansoft HFSS simulation is used to provide a good starting point for antenna design before actual prototype are built using an LPKF automated router. Simulated results are compared with actual measurements to highlight any differences and help demonstrate the effects of antenna miniaturization. Radiation characteristics are measured illustrating how each antenna is affected by the influence of a non-ideal ground plane. The antenna with outstanding performance is further evaluated to determine its maximum range of communication. Each designs range performance is evaluated using a pair of transceivers to demonstrate round-trip communication. This research is intended to provide a knowledge base which will help decrease the number of design iterations needed for future implementation of products requiring integration of small printed antennas. In the past, several design iterations have been needed to fine tune antenna dimensions and achieve acceptable levels of performance. This process consumes a large amount of time and material resources leading to costly development of transceiver designs. Typically, this occurs because matching components and antenna geometries are almost never correct on the first design. This work hopes to determine the limitations associated with antenna miniaturization and provide well known antenna examples that can be easily used in future work.

  17. Self-bunching electron guns

    SciTech Connect (OSTI)

    Mako, F.M.; Len, L.K.

    1999-05-01

    We report on three electron gun projects that are aimed at power tube and injector applications. The purpose of the work is to develop robust electron guns which produce self-bunched, high-current-density beams. We have demonstrated, in a microwave cavity, self-bunching, cold electron emission, long life, and tolerance to contamination. The cold process is based on secondary electron emission. FMT has studied using simulation codes the resonant bunching process which gives rise to high current densities (0.01{endash}5 kA/cm{sup 2}), high charge bunches (up to 500 nC/bunch), and short pulses (1{endash}100 ps) for frequencies from 1 to 12 GHz. The beam pulse width is nominally {approximately}5{percent} of the {ital rf} period. The first project is the L-Band Micro-Pulse Gun (MPG). Measurements show {approximately}40 ps long micro-bunches at {approximately}20 A/cm{sup 2} without contamination due to air exposure. Lifetime testing has been carried out for about 18 months operating at 1.25 GHz for almost 24 hours per day at a repetition rate of 300 Hz and 5 {mu}s-long macro-pulses. Approximately 5.8{times}10{sup 13} micro-bunches or 62,000 coulombs have passed through this gun and it is still working fine. The second project, the S-Band MPG, is now operational. It is functioning at a frequency of 2.85 GHz, a repetition rate of 30 Hz, with a 2 {mu}s-long macro-pulse. It produces about 45 A in the macro-pulse. The third project is a 34.2 GHz frequency-multiplied source driven by an X-Band MPG. A point design was performed at an {ital rf} output power of 150 MW at 34.2 GHz. The resulting system efficiency is 53{percent} and the gain is 60 dB. The system efficiency includes the input cavity efficiency, input driver efficiency (a 50 MW klystron at 11.4 GHz), output cavity efficiency, and the post-acceleration efficiency. {copyright} {ital 1999 American Institute of Physics.}

  18. Measurement of CP observables in B__ ->D_CPK__ decays and constraints on the CKM angle gamma

    SciTech Connect (OSTI)

    del Amo Sanchez, P.; Lees, J.P.; Poireau, V.; Prencipe, E.; Tisserand, V.; Garra Tico, J.; Grauges, E.; Martinelli, M.; Palano, A.; Pappagallo, M.; Eigen, G.; Stugu, B.; Sun, L.; Battaglia, M.; Brown, D.N.; Hooberman, B.; Kerth, L.T.; Kolomensky, Yu.G.; Lynch, G.; Osipenkov, I.L.; Tanabe, T.; /UC, Berkeley /Birmingham U. /Ruhr U., Bochum /British Columbia U. /Brunel U. /Novosibirsk, IYF /UC, Irvine /UC, Riverside /UC, Santa Barbara /UC, Santa Cruz /Caltech /Cincinnati U. /Colorado U. /Colorado State U. /Dortmund U. /Dresden, Tech. U. /Ecole Polytechnique /Edinburgh U. /INFN, Ferrara /Ferrara U. /INFN, Ferrara /INFN, Ferrara /Ferrara U. /INFN, Ferrara /Frascati /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /INFN, Genoa /INFN, Genoa /Genoa U. /Indian Inst. Tech., Guwahati /Harvard U. /Heidelberg U. /Humboldt U., Berlin /Imperial Coll., London /Iowa State U. /Iowa State U. /Johns Hopkins U. /Paris U., VI-VII /LLNL, Livermore /Liverpool U. /Queen Mary, U. of London /Royal Holloway, U. of London /Royal Holloway, U. of London /Louisville U. /Mainz U., Inst. Kernphys. /Manchester U. /Maryland U. /Massachusetts U., Amherst /MIT /McGill U. /INFN, Milan /Milan U. /INFN, Milan /INFN, Milan /Milan U. /Mississippi U. /Montreal U. /INFN, Naples /Naples U. /NIKHEF, Amsterdam /NIKHEF, Amsterdam /Notre Dame U. /Ohio State U. /Oregon U. /INFN, Padua /Padua U. /INFN, Padua /INFN, Padua /Padua U. /Paris U., VI-VII /INFN, Perugia /Perugia U. /INFN, Pisa /Pisa U. /INFN, Pisa /Pisa, Scuola Normale Superiore /INFN, Pisa /Pisa U. /INFN, Pisa /Princeton U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /INFN, Rome /INFN, Rome /Rome U. /Rostock U. /Rutherford /DAPNIA, Saclay /SLAC /South Carolina U. /Southern Methodist U. /Stanford U., Phys. Dept. /SUNY, Albany /Tel Aviv U. /Tennessee U. /Texas U. /Texas U., Dallas /INFN, Turin /Turin U. /INFN, Trieste /Trieste U. /Valencia U. /Victoria U. /Warwick U. /Wisconsin U., Madison

    2010-08-25

    Using the entire sample of 467 million {Upsilon}(4S) {yields} B{bar B} decays collected with the BABAR detector at the PEP-II asymmetric-energy B factory at SLAC, we perform a 'GLW' analysis of B{sup {+-}} {yields} D{sup {+-}} decays, using decay modes in which the neutral D meson decays to either CP-eigenstates or non-CP-eigenstates. We measure the partial decay rate charge asymmetries for CP-even and CP-odd D final states to be A{sub CP+} = 0.25 {+-} 0.06 {+-} 0.02 and A{sub CP-} = -0.09 {+-} 0.07 {+-} 0.02, respectively, where the first error is the statistical and the second is the systematic uncertainty. The parameter A{sub CP+} is different from zero with a significance of 3.6 standard deviations, constituting evidence for direct CP violation. We also measure the ratios of the charged-averaged B partial decay rates in CP and non-CP decays, R{sub CP+} = 1.18 {+-} 0.09 {+-} 0.05 and R{sub CP-} = 1.07 {+-} 0.08 {+-} 0.04. We infer frequentist confidence intervals for the angle {gamma} of the (db) unitarity triangle, for the strong phase difference {delta}{sub B}, and for the amplitude ratio r{sub B}, which are related to the B{sup -} {yields} D{sup -} decay amplitude by r{sub B}e{sup i({delta}{sub b-{gamma}})} = A(B{sup -} {yields} {bar D}{sup 0}K{sup -})/A(B{sup -} {yields} D{sup 0}K{sup 0-}). Including statistical and systematic uncertainties, they obtain 0.24 < r{sub B} < 0.45 (0.06 < r{sub B} < 0.51) and, modulo 180{sup o}, 11.3{sup o} < {gamma} < 22.7{sup o} or 80.9{sup o} < {gamma} < 99.1{sup o} or 157.3{sup o} < {gamma} 168.7{sup o} (7.0{sup o} < {gamma} < 173.0{sup o}) at the 68% (95%) confidence level.

  19. Performance of Trasuranic-Loaded Fully Ceramic Micro-Encapsulated Fuel in LWRs Interim Report, Including Void Reactivity Evaluation

    SciTech Connect (OSTI)

    Michael A. Pope; Brian Boer; Gilles Youinou; Abderrafi M. Ougouag

    2011-03-01

    The current focus of the Deep Burn Project is on once-through burning of transuranice (TRU) in light water reactors (LWRs). The fuel form is called Fully-Ceramic Micro-encapsulated (FCM) fuel, a concept that borrows the tri-isotropic (TRISO) fuel particle design from high-temperature reactor technology. In the Deep Burn LWR (DB-LWR) concept, these fuel particles would be pressed into compacts using SiC matrix material and loaded into fuel pins for use in conventional LWRs. The TRU loading comes from the spent fuel of a conventional LWR after 5 years of cooling. Unit cell calculations have been performed using the DRAGON-4 code in order assess the physics attributes of TRU-only FCM fuel in an LWR lattice. Depletion calculations assuming an infinite lattice condition were performed with calculations of various reactivity coefficients performed at each step. Unit cells containing typical UO2 and MOX fuel were analyzed in the same way to provide a baseline against which to compare the TRU-only FCM fuel. Loading of TRU-only FCM fuel into a pin without significant quantities of uranium challenges the design from the standpoint of several key reactivity parameters, particularly void reactivity, and to some degree, the Doppler coefficient. These unit cells, while providing an indication of how a whole core of similar fuel would behave, also provide information of how individual pins of TRU-only FCM fuel would influence the reactivity behavior of a heterogeneous assembly. If these FCM fuel pins are included in a heterogeneous assembly with LEU fuel pins, the overall reactivity behavior would be dominated by the uranium pins while attractive TRU destruction performance of the TRU-only FCM fuel pins may be preserved. A configuration such as this would be similar to CONFU assemblies analyzed in previous studies. Analogous to the plutonium content limits imposed on MOX fuel, some amount of TRU-only FCM pins in an otherwise-uranium fuel assembly may give acceptable reactivity performance. Assembly calculations will be performed in future work to explore the design options for heterogeneous assemblies of this type and their impact on reactivity coefficients.

  20. Material Performance of Fully-Ceramic Micro-Encapsulated Fuel under Selected LWR Design Basis Scenarios: Final Report

    SciTech Connect (OSTI)

    B. Boer; R. S. Sen; M. A. Pope; A. M. Ougouag

    2011-09-01

    The extension to LWRs of the use of Deep-Burn coated particle fuel envisaged for HTRs has been investigated. TRISO coated fuel particles are used in Fully-Ceramic Microencapsulated (FCM) fuel within a SiC matrix rather than the graphite of HTRs. TRISO particles are well characterized for uranium-fueled HTRs. However, operating conditions of LWRs are different from those of HTRs (temperature, neutron energy spectrum, fast fluence levels, power density). Furthermore, the time scales of transient core behavior during accidents are usually much shorter and thus more severe in LWRs. The PASTA code was updated for analysis of stresses in coated particle FCM fuel. The code extensions enable the automatic use of neutronic data (burnup, fast fluence as a function of irradiation time) obtained using the DRAGON neutronics code. An input option for automatic evaluation of temperature rise during anticipated transients was also added. A new thermal model for FCM was incorporated into the code; so-were updated correlations (for pyrocarbon coating layers) suitable to estimating dimensional changes at the high fluence levels attained in LWR DB fuel. Analyses of the FCM fuel using the updated PASTA code under nominal and accident conditions show: (1) Stress levels in SiC-coatings are low for low fission gas release (FGR) fractions of several percent, as based on data of fission gas diffusion in UO{sub 2} kernels. However, the high burnup level of LWR-DB fuel implies that the FGR fraction is more likely to be in the range of 50-100%, similar to Inert Matrix Fuels (IMFs). For this range the predicted stresses and failure fractions of the SiC coating are high for the reference particle design (500 {micro}mm kernel diameter, 100 {micro}mm buffer, 35 {micro}mm IPyC, 35 {micro}mm SiC, 40 {micro}mm OPyC). A conservative case, assuming 100% FGR, 900K fuel temperature and 705 MWd/kg (77% FIMA) fuel burnup, results in a 8.0 x 10{sup -2} failure probability. For a 'best-estimate' FGR fraction of 50% and a more modest burnup target level of 500 MWd/kg ,the failure probability drops below 2.0 x 10{sup -5}, the typical performance of TRISO fuel made under the German HTR research program. An optimization study on particle design shows improved performance if the buffer size is increased from 100 to 120 {micro}mm while reducing the OPyC layer. The presence of the latter layer does not provide much benefit at high burnup levels (and fast fluence levels). Normally the shrinkage of the OPyC would result in a beneficial compressive force on the SiC coating. However, at high fluence levels the shrinkage is expected to turn into swelling, resulting in the opposite effect. However, this situation is different when the SiC-matrix, in which the particles are embedded, is also considered: the OPyC swelling can result in a beneficial compressive force on the SiC coating since outward displacement of the OPyC outer surface is inhibited by the presence of the also-swelling SiC matrix. Taking some credit for this effect by adopting a 5 {micro}mm SiC-matrix layer, the optimized particle (100 {micro}mm buffer and 10 {micro}mm OPyC), gives a failure probability of 1.9 x 10{sup -4} for conservative conditions. During a LOCA transient, assuming core re-flood in 30 seconds, the temperature of the coated particle can be expected to be about 200K higher than nominal temperature (900K). For this event the particle failure fraction for a conservative case is 1.0 x 10{sup -2}, for the optimized particle design. For a FGR-fraction of 50% this value reduces to 6.4 x 10{sup -4}.

  1. Implementing and diagnosing magnetic flux compression on the Z pulsed power accelerator

    SciTech Connect (OSTI)

    McBride, Ryan D.; Bliss, David E.; Gomez, Matthew R.; Hansen, Stephanie B.; Martin, Matthew R.; Jennings, Christopher Ashley; Slutz, Stephen A.; Rovang, Dean C.; Knapp, Patrick F.; Schmit, Paul F.; Awe, Thomas James; Hess, M. H.; Lemke, Raymond W.; Dolan, D. H.; Lamppa, Derek C.; Jobe, Marc Ronald Lee; Fang, Lu; Hahn, Kelly D.; Chandler, Gordon A.; Cooper, Gary Wayne; Ruiz, Carlos L.; Maurer, A. J.; Robertson, Grafton Kincannon; Cuneo, Michael E.; Sinars, Daniel; Tomlinson, Kurt; Smith, Gary; Paguio, Reny; Intrator, Tom; Weber, Thomas; Greenly, John

    2015-11-01

    We report on the progress made to date for a Laboratory Directed Research and Development (LDRD) project aimed at diagnosing magnetic flux compression on the Z pulsed-power accelerator (0-20 MA in 100 ns). Each experiment consisted of an initially solid Be or Al liner (cylindrical tube), which was imploded using the Z accelerator's drive current (0-20 MA in 100 ns). The imploding liner compresses a 10-T axial seed field, B z ( 0 ) , supplied by an independently driven Helmholtz coil pair. Assuming perfect flux conservation, the axial field amplification should be well described by B z ( t ) = B z ( 0 ) x [ R ( 0 ) / R ( t )] 2 , where R is the liner's inner surface radius. With perfect flux conservation, B z ( t ) and dB z / dt values exceeding 10 4 T and 10 12 T/s, respectively, are expected. These large values, the diminishing liner volume, and the harsh environment on Z, make it particularly challenging to measure these fields. We report on our latest efforts to do so using three primary techniques: (1) micro B-dot probes to measure the fringe fields associated with flux compression, (2) streaked visible Zeeman absorption spectroscopy, and (3) fiber-based Faraday rotation. We also mention two new techniques that make use of the neutron diagnostics suite on Z. These techniques were not developed under this LDRD, but they could influence how we prioritize our efforts to diagnose magnetic flux compression on Z in the future. The first technique is based on the yield ratio of secondary DT to primary DD reactions. The second technique makes use of the secondary DT neutron time-of-flight energy spectra. Both of these techniques have been used successfully to infer the degree of magnetization at stagnation in fully integrated Magnetized Liner Inertial Fusion (MagLIF) experiments on Z [P. F. Schmit et al. , Phys. Rev. Lett. 113 , 155004 (2014); P. F. Knapp et al. , Phys. Plasmas, 22 , 056312 (2015)]. Finally, we present some recent developments for designing and fabricating novel micro B-dot probes to measure B z ( t ) inside of an imploding liner. In one approach, the micro B-dot loops were fabricated on a printed circuit board (PCB). The PCB was then soldered to off-the-shelf 0.020- inch-diameter semi-rigid coaxial cables, which were terminated with standard SMA connectors. These probes were recently tested using the COBRA pulsed power generator (0-1 MA in 100 ns) at Cornell University. In another approach, we are planning to use new multi-material 3D printing capabilities to fabricate novel micro B-dot packages. In the near future, we plan to 3D print these probes and then test them on the COBRA generator. With successful operation demonstrated at 1-MA, we will then make plans to use these probes on a 20-MA Z experiment.

  2. Dielectric-Lined High-Gradient Accelerator Structure

    SciTech Connect (OSTI)

    Jay L. Hirshfield

    2012-04-24

    Rectangular particle accelerator structures with internal planar dielectric elements have been studied, with a view towards devising structures with lower surface fields for a given accelerating field, as compared with structures without dielectrics. Success with this concept is expected to allow operation at higher accelerating gradients than otherwise on account of reduced breakdown probabilities. The project involves studies of RF breakdown on amorphous dielectrics in test cavities that could enable high-gradient structures to be built for a future multi-TeV collider. The aim is to determine what the limits are for RF fields at the surfaces of selected dielectrics, and the resulting acceleration gradient that could be achieved in a working structure. The dielectric of principal interest in this study is artificial CVD diamond, on account of its advertised high breakdown field ({approx}2 GV/m for dc), low loss tangent, and high thermal conductivity. Experimental studies at mm-wavelengths on materials and structures for achieving high acceleration gradient were based on the availability of the 34.3 GHz third-harmonic magnicon amplifier developed by Omega-P, and installed at the Yale University Beam Physics Laboratory. Peak power from the magnicon was measured to be about 20 MW in 0.5 {micro}s pulses, with a gain of 54 dB. Experiments for studying RF high-field effects on CVD diamond samples failed to show any evidence after more than 10{sup 5} RF pulses of RF breakdown up to a tangential surface field strength of 153 MV/m; studies at higher fields were not possible due to a degradation in magnicon performance. A rebuild of the tube is underway at this writing. Computed performance for a dielectric-loaded rectangular accelerator structure (DLA) shows highly competitive properties, as compared with an existing all-metal structure. For example, comparisons were made of a DLA structure having two planar CVD diamond elements with a all-metal CERN structure HDS operating at 30 GHz. It was shown that the ratio of maximum surface electric field to accelerating field at the metal wall is only 0.35-0.4 for DLA, much smaller than the value 2.2 for HDS; and the ratio of surface magnetic field to accelerating field is 3.0 mA/V for DLA, compared with 3.45 mA/V for HDS. These values bode well for DLA in helping to avoid breakdown and to reducing pulsed surface heating and fatigue. The shunt impedance is found to be 160-175 M{Omega}/m for DLA, as compared to 99 M{Omega}/m for HDS. Conclusions are reached from this project that CVD diamond appears promising as a dielectric with a high threshold for RF breakdown, and that rectangular accelerator structures can be devised using planar CVD diamond elements that could be operated at higher acceleration gradients with low probability of RF breakdown, as compared with corresponding all-metallic structures.

  3. NW-MILO Acoustic Data Collection

    SciTech Connect (OSTI)

    Matzner, Shari; Myers, Joshua R.; Maxwell, Adam R.; Jones, Mark E.

    2010-02-17

    There is an enduring requirement to improve our ability to detect potential threats and discriminate these from the legitimate commercial and recreational activity ongoing in the nearshore/littoral portion of the maritime domain. The Northwest Maritime Information and Littoral Operations (NW-MILO) Program at PNNLs Coastal Security Institute in Sequim, Washington is establishing a methodology to detect and classify these threats - in part through developing a better understanding of acoustic signatures in a near-shore environment. The purpose of the acoustic data collection described here is to investigate the acoustic signatures of small vessels. The data is being recorded continuously, 24 hours a day, along with radar track data and imagery. The recording began in August 2008, and to date the data contains tens of thousands of signals from small vessels recorded in a variety of environmental conditions. The quantity and variety of this data collection, with the supporting imagery and radar track data, makes it particularly useful for the development of robust acoustic signature models and advanced algorithms for signal classification and information extraction. The underwater acoustic sensing system is part of a multi-modal sensing system that is operating near the mouth of Sequim Bay. Sequim Bay opens onto the Straight of Juan de Fuca, which contains part of the border between the U.S. and Canada. Table 1 lists the specific components used for the NW-MILO system. The acoustic sensor is a hydrophone permanently deployed at a mean depth of about 3 meters. In addition to a hydrophone, the other sensors in the system are a marine radar, an electro-optical (EO) camera and an infra-red (IR) camera. The radar is integrated with a vessel tracking system (VTS) that provides position, speed and heading information. The data from all the sensors is recorded and saved to a central server. The data has been validated in terms of its usability for characterizing the signatures of small vessels. The sampling rate of 8 kHz and low pass filtering to 2 kHz results in an alias-free signal in the frequency band that is appropriate for small vessels. Calibration was performed using a Lubell underwater speaker so that the raw data signal levels can be converted to sound pressure. Background noise is present due to a nearby pump and as a result of tidal currents. More study is needed to fully characterize the noise, but it does not pose an obstacle to using the acoustic data for the purposes of vessel detection and signature analysis. The detection range for a small vessel was estimated using the calibrated voltage response of the system and a cylindrical spreading model for transmission loss. The sound pressure of a typical vessel with an outboard motor was found to be around 140 dB mPa, and could theoretically be detected from 10 km away. In practical terms, a small vessel could reliably be detected from 3 - 5 km away. The data is archived in netCDF files, a standard scientific file format that is "self describing". This means that each data file contains the metadata - timestamps, units, origin, etc. - needed to make the data meaningful and portable. Other file formats, such as XML, are also supported. A visualization tool has been developed to view the acoustic data in the form of spectrograms, along with the coincident radar track data and camera images.

  4. Phase 1A Final Report for the AREVA Team Enhanced Accident Tolerant Fuels Concepts

    SciTech Connect (OSTI)

    Morrell, Mike E.

    2015-03-19

    In response to the Department of Energy (DOE) funded initiative to develop and deploy lead fuel assemblies (LFAs) of Enhanced Accident Tolerant Fuel (EATF) into a US reactor within 10 years, AREVA put together a team to develop promising technologies for improved fuel performance during off normal operations. This team consisted of the University of Florida (UF) and the University of Wisconsin (UW), Savannah River National Laboratory (SRNL), Duke Energy and Tennessee Valley Authority (TVA). This team brought broad experience and expertise to bear on EATF development. AREVA has been designing; manufacturing and testing nuclear fuel for over 50 years and is one of the 3 large international companies supplying fuel to the nuclear industry. The university and National Laboratory team members brought expertise in nuclear fuel concepts and materials development. Duke and TVA brought practical utility operating experience. This report documents the results from the initial “discovery phase” where the team explored options for EATF concepts that provide enhanced accident tolerance for both Design Basis (DB) and Beyond Design Basis Events (BDB). The main driver for the concepts under development were that they could be implemented in a 10 year time frame and be economically viable and acceptable to the nuclear fuel marketplace. The economics of fuel design make this DOE funded project very important to the nuclear industry. Even incremental changes to an existing fuel design can cost in the range of $100M to implement through to LFAs. If this money is invested evenly over 10 years then it can take the fuel vendor several decades after the start of the project to recover their initial investment and reach a breakeven point on the initial investment. Step or radical changes to a fuel assembly design can cost upwards of $500M and will take even longer for the fuel vendor to recover their investment. With the projected lifetimes of the current generation of nuclear power plants large scale investment by the fuel vendors is difficult to justify. Specific EATF enhancements considered by the AREVA team were; Improved performance in DB and BDB conditions; Reduced release to the environment in a catastrophic accident; Improved performance during normal operating conditions; Improved performance if US reactors start to load follow; Equal or improved economics of the fuel; and Improvements to the fuel behavior to support future transportation and storage of the used nuclear fuel (UNF). In pursuit of the above enhancements, EATF technology concepts that our team considered were; Additives to the fuel pellets which included; Chromia doping to increase fission gas retention. Chromia doping has the potential to improve load following characteristics, improve performance of the fuel pellet during clad failure, and potentially lock up cesium into the fuel matrix; Silicon Carbide (SiC) Fibers to improve thermal heat transfer in normal operating conditions which also improves margin in accident conditions and the potential to lock up iodine into the fuel matrix; Nano-diamond particles to enhance thermal conductivity; Coatings on the fuel cladding; and Nine coatings on the existing Zircaloy cladding to increase coping time and reduce clad oxidation and hydrogen generation during accident conditions, as well as reduce hydrogen pickup and mitigate hydride reorientation in the cladding. To facilitate the development process AREVA adopted a formal “Gate Review Process” (GR) that was used to review results and focus resources onto promising technologies to reduce costs and identify the technologies that would potentially be carried forward to LFAs within a 10 year period. During the initial discovery phase of the project AREVA took the decision to be relatively hands off and allow our university and National Laboratory partners to be free thinking and consider options that would not be constrained by preconceived ideas from the fuel vendor. To counter this and to keep the partners focused, the GR process was utilized. During this GR process each of the team members presented their findings to a board made up of technical experts from utilities, fuel manufacturing experts, fuel technical experts, and fuel research and development (R&D) experts. During the initial 2 years of the project there were several major accomplishments. These accomplishments, along with the implications for successfully implementing EATF, are; The experimental spark plasma sintering process (SPS) process was successfully used to produce fuel pellets containing either 10% SiC whiskers or nano-diamond particles. The ability to use this process enables the thermal margin enhancements of the fuel additives to be realized. Without the SPS process, the conventional process cannot support adding pellet additives in the required quantities; Coatings of Ti2AlC were successfully applied to Zircaloy-4 cladding. Testing of Ti2AlC coatings at Loss of Cooling Accident (LOCA) conditions showed reduced cladding oxidation compared to present un-coated Zircaloy-4 cladding. This achievement allows the presently used cladding system to be retained so that the 10 year schedule can be met. Having to implement a new cladding material will extend the development schedule beyond 10 years; Several documents were produced to support future development, testing, and licensing of EATF, including a design requirements traceability matrix, a draft business plan, a draft test plan, a draft regulatory plan, and the acceptance criteria for lead fuel assembly insertion into a commercial reactor. This preparatory work lays the foundation for ensuring the future development plans address all the areas required to test, license, and manufacture the new EATF; and In addition, the high velocity oxy-fuel and electrophoretic deposition (EPD) coating application processes were dropped from further consideration due to their inability to meet manufacturing criteria. This allows the resources to be focused on the most promising EATF concepts identified. Future development opportunities that were identified during this work include; The use of SiC or diamond requires that a new pellet production technique (Spark Plasma Sintering), be developed. This entails investment in developing, proving and implementing a new commercial pellet production process. Development of the process to apply thinner coatings is required; Coatings cannot be too “thick” or they will displace a significant volume of water in the core resulting in reduced thermal hydraulic characteristics; Application of the coating at high temperature can affect the Zircaloy substrate. This will require the development and implementation of a new cladding coating manufacturing process; and Replace the Cold Spray (CS) cladding coating application with the Physical Vapor Deposition (PVD) process to eliminate duplication of work and provide greater control over coating thicknesses. This can result in a reduction in the final cycle economic penalty of coatings.

  5. RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

    SciTech Connect (OSTI)

    Sweeten, John M; Annamalai, Kalyan; Auvermann, Brent; Mukhtar, Saqib; Capareda, Sergio C.; Engler, Cady; Harman, Wyatte; Reddy, J N; DeOtte, Robert; Parker, David B.; Stewart, B. A.

    2012-05-03

    The Texas Panhandle is regarded as the "Cattle Feeding Capital of the World", producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco -- the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 -- Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 -- Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to re-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological & Agricultural Engineering Department (BAEN) College Station; and West Texas A&M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.

  6. RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

    SciTech Connect (OSTI)

    John M. Sweeten, Kalyan Annamalai Brent Auvermann Saqib Mukhtar Sergio C. Capareda Cady Engler Wyatte Harman J.N. Reddy, Robert DeOtte David B. Parker Dr. B.A. Stewart

    2012-05-03

    The Texas Panhandle is regarded as the 'Cattle Feeding Capital of the World', producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco - the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 - Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 - Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to red-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological and Agricultural Engineering Department (BAEN) College Station; and West Texas A and M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass) and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling beh

  7. RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

    SciTech Connect (OSTI)

    Kalyan Annamalai, John M. Sweeten, Brent W. Auvermann, Saqib Mukhtar, Sergio Caperada Cady R. Engler, Wyatte Harman Reddy JN Robert Deotte

    2012-05-03

    The Texas Panhandle is regarded as the 'Cattle Feeding Capital of the World', producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco - the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 - Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 - Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to red-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological and Agricultural Engineering Department (BAEN) College Station; and West Texas A and M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass) and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.

  8. RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

    SciTech Connect (OSTI)

    Sweeten, John; Annamalai, Kalyan; Auvermann, Brent; Mukhtar, Saqib; Capareda, Sergio C; Engler, Cady; Harman, Wyatte; Reddy, J N; DeOtte, Robert; Parker, David B; Stewart, B A

    2012-05-02

    The Texas Panhandle is regarded as the "Cattle Feeding Capital of the World", producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure /year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco—the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 – Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 – Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to red-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological & Agricultural Engineering Department (BAEN) College Station; and West Texas A&M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.

  9. Atmospheric Radiation Measurement program climate research facility operations quarterly report July 1 - September 30, 2008.

    SciTech Connect (OSTI)

    Sisterson, D. L.

    2008-10-08

    Individual raw data streams from instrumentation at the Atmospheric Radiation Measurement (ARM) Program Climate Research Facility (ACRF) fixed and mobile sites are collected and sent to the Data Management Facility (DMF) at Pacific Northwest National Laboratory (PNNL) for processing in near real-time. Raw and processed data are then sent daily to the ACRF Archive, where they are made available to users. For each instrument, we calculate the ratio of the actual number of data records received daily at the Archive to the expected number of data records. The results are tabulated by (1) individual data stream, site, and month for the current year and (2) site and fiscal year (FY) dating back to 1998. Table 1 shows the accumulated maximum operation time (planned uptime), actual hours of operation, and variance (unplanned downtime) for the period July 1 - September 30, 2008, for the fixed sites. The AMF has been deployed to China, but the data have not yet been released. The fourth quarter comprises a total of 2,208 hours. The average exceeded our goal this quarter. The Site Access Request System is a web-based database used to track visitors to the fixed and mobile sites, all of which have facilities that can be visited. The NSA locale has the Barrow and Atqasuk sites. The SGP site has a central facility, 23 extended facilities, 4 boundary facilities, and 3 intermediate facilities. The TWP locale has the Manus, Nauru, and Darwin sites. HFE represents the AMF statistics for the Shouxian, China, deployment in 2008. FKB represents the AMF statistics for the Haselbach, Germany, past deployment in 2007. NIM represents the AMF statistics for the Niamey, Niger, Africa, past deployment in 2006. PYE represents just the AMF Archive statistics for the Point Reyes, California, past deployment in 2005. In addition, users who do not want to wait for data to be provided through the ACRF Archive can request a research account on the local site data system. The seven computers for the research accounts are located at the Barrow and Atqasuk sites; the SGP central facility; the TWP Manus, Nauru, and Darwin sites; and the DMF at PNNL. In addition, the ACRF serves as a data repository for a long-term Arctic atmospheric observatory in Eureka, Canada (80 degrees 05 minutes N, 86 degrees 43 minutes W) as part of the multiagency Study of Environmental Arctic Change (SEARCH) Program. NOAA began providing instruments for the site in 2005, and currently cloud radar data are available. The intent of the site is to monitor the important components of the Arctic atmosphere, including clouds, aerosols, atmospheric radiation, and local-scale atmospheric dynamics. Because of the similarity of ACRF NSA data streams and the important synergy that can be formed between a network of Arctic atmospheric observations, much of the SEARCH observatory data are archived in the ARM archive. Instruments will be added to the site over time. For more information, please visit http://www.db.arm.gov/data. The designation for the archived Eureka data is YEU and is now included in the ACRF user metrics. This quarterly report provides the cumulative numbers of visitors and user accounts by site for the period October 1, 2007 - September 30, 2008. Table 2 shows the summary of cumulative users for the period October 1, 2007 - September 30, 2008. For the fourth quarter of FY 2008, the overall number of users is down substantially (about 30%) from last quarter. Most of this decrease resulted from a reduction in the ACRF Infrastructure users (e.g., site visits, research accounts, on-site device accounts, etc.) associated with the AMF China deployment. While users had easy access to the previous AMF deployment in Germany that resulted in all-time high user statistics, physical and remote access to on-site accounts are extremely limited for the AMF deployment in China. Furthermore, AMF data have not yet been released from China to the Data Management Facility for processing, which affects Archive user statistics. However, Archive users are only down about 10% from last quarter. Another reason for the apparent reduction in Archive users is that data from the Indirect and Semi-Direct Aerosol Campaign (ISDAC), a major field campaign conducted on the North Slope of Alaska, are not yet available to users. For reporting purposes, the three ACRF sites and the AMF operate 24 hours per day, 7 days per week, and 52 weeks per year. Time is reported in days instead of hours. If any lost work time is incurred by any employee, it is counted as a workday loss. Table 3 reports the consecutive days since the last recordable or reportable injury or incident causing damage to property, equipment, or vehicle for the period July 1 - September 30, 2008. There were no incidents this reporting period.

  10. Atmospheric Radiation Measurement program climate research facility operations quarterly report January 1 - March 31, 2008.

    SciTech Connect (OSTI)

    Sisterson, D. L.

    2008-05-22

    Individual raw data streams from instrumentation at the Atmospheric Radiation Measurement (ARM) Program Climate Research Facility (ACRF) fixed and mobile sites are collected and sent to the Data Management Facility (DMF) at Pacific Northwest National Laboratory (PNNL) for processing in near real time. Raw and processed data are then sent daily to the ACRF Archive, where they are made available to users. For each instrument, we calculate the ratio of the actual number of data records received daily at the Archive to the expected number of data records. The results are tabulated by (1) individual data stream, site, and month for the current year and (2) site and fiscal year (FY) dating back to 1998. Table 1 shows the accumulated maximum operation time (planned uptime), actual hours of operation, and variance (unplanned downtime) for the period January 1 - March 31, 2008, for the fixed sites. The AMF is being deployed to China and is not in operation this quarter. The second quarter comprises a total of 2,184 hours. The average as well as the individual site values exceeded our goal this quarter. The Site Access Request System is a web-based database used to track visitors to the fixed and mobile sites, all of which have facilities that can be visited. The NSA locale has the Barrow and Atqasuk sites. The SGP site has a central facility, 23 extended facilities, 4 boundary facilities, and 3 intermediate facilities. The TWP locale has the Manus, Nauru, and Darwin sites. FKB represents the AMF statistics for the Haselbach, Germany, past deployment in 2007. NIM represents the AMF statistics for the Niamey, Niger, Africa, past deployment in 2006. PYE represents just the AMF Archive statistics for the Point Reyes, California, past deployment in 2005. In addition, users who do not want to wait for data to be provided through the ACRF Archive can request a research account on the local site data system. The seven computers for the research accounts are located at the Barrow and Atqasuk sites; the SGP central facility; the TWP Manus, Nauru, and Darwin sites; and the DMF at PNNL. In addition, the ACRF serves as a data repository for a long-term Arctic atmospheric observatory in Eureka, Canada (80 degrees 05 minutes N, 86 degrees 43 minutes W) as part of the multiagency Study of Environmental Arctic Change (SEARCH) Program. NOAA began providing instruments for the site in 2005, and currently cloud radar data are available. The intent of the site is to monitor the important components of the Arctic atmosphere, including clouds, aerosols, atmospheric radiation, and local-scale atmospheric dynamics. Because of the similarity of ACRF NSA data streams and the important synergy that can be formed between a network of Arctic atmospheric observations, much of the SEARCH observatory data are archived in the ARM archive. Instruments will be added to the site over time. For more information, please visit http://www.db.arm.gov/data. The designation for the archived Eureka data is YEU and is now included in the ACRF user metrics. This quarterly report provides the cumulative numbers of visitors and user accounts by site for the period April 1, 2007 - March 31, 2008. Table 2 shows the summary of cumulative users for the period April 1, 2007 - March 31, 2007. For the second quarter of FY 2008, the overall number of users was nearly as high as the last reporting period, in which a new record high for number of users was established. This quarter, a new record high was established for the number of user days, particularly due to the large number of field campaign activities in conjunction with the AMF deployment in Germany, as well as major field campaigns at the NSA and SGP sites. This quarter, 37% of the Archive users are ARM science-funded principal investigators and 23% of all other facility users are either ARM science-funded principal investigators or ACRF infrastructure personnel. For reporting purposes, the three ACRF sites and the AMF operate 24 hours per day, 7 days per week, and 52 weeks per year. Time is reported in days instead of hours. If any lost work time is incurred by any employee, it is counted as a workday loss. Table 3 reports the consecutive days since the last recordable or reportable injury or incident causing damage to property, equipment, or vehicle for the period January 1 - March 31, 2008. There were no incidents this reporting period.

  11. Atmospheric Radiation Measurement program climate research facility operations quarterly report October 1 - December 31, 2007.

    SciTech Connect (OSTI)

    Sisterson, D. L.

    2008-01-24

    Individual raw data streams from instrumentation at the Atmospheric Radiation Measurement (ARM) Program Climate Research Facility (ACRF) fixed and mobile sites are collected and sent to the Data Management Facility (DMF) at Pacific Northwest National Laboratory (PNNL) for processing in near real time. Raw and processed data are then sent daily to the ACRF Archive, where they are made available to users. For each instrument, we calculate the ratio of the actual number of data records received daily at the Archive to the expected number of data records. The results are tabulated by (1) individual data stream, site, and month for the current year and (2) site and fiscal year (FY) dating back to 1998. Table 1 shows the accumulated maximum operation time (planned uptime), actual hours of operation, and variance (unplanned downtime) for the period October 1 - December 31, 2007, for the fixed sites and the mobile site. The AMF has been deployed to Germany and this was the final operational quarter. The first quarter comprises a total of 2,208 hours. Although the average exceeded our goal this quarter, a series of severe weather events (i.e., widespread ice storms) disrupted utility services, which affected the SGP performance measures. Some instruments were covered in ice and power and data communication lines were down for more than 10 days in some areas of Oklahoma and Kansas, which resulted in lost data at the SGP site. The Site Access Request System is a web-based database used to track visitors to the fixed sites, all of which have facilities that can be visited. The NSA locale has the Barrow and Atqasuk sites. The SGP site has a central facility, 23 extended facilities, 4 boundary facilities, and 3 intermediate facilities. The TWP locale has the Manus, Nauru, and Darwin sites. The AMF completed its mission at the end of this quarter in Haselback, Germany (FKB designation). NIM represents the AMF statistics for the Niamey, Niger, Africa, past deployment in 2006. PYE represents just the AMF Archive statistics for the Point Reyes, California, past deployment in 2005. In addition, users who do not want to wait for data to be provided through the ACRF Archive can request an account on the local site data system. The eight research computers are located at the Barrow and Atqasuk sites; the SGP central facility; the TWP Manus, Nauru, and Darwin sites; the DMF at PNNL; and the AMF, currently in Germany. In addition, the ACRF serves as a data repository for a long-term Arctic atmospheric observatory in Eureka, Canada (80 degrees 05 minutes N, 86 degrees 43 minutes W) as part of the multiagency Study of Environmental Arctic Change (SEARCH) Program. NOAA began providing instruments for the site in 2005, and currently cloud radar data are available. The intent of the site is to monitor the important components of the Arctic atmosphere, including clouds, aerosols, atmospheric radiation, and local-scale atmospheric dynamics. Due to the similarity of ACRF NSA data streams, and the important synergy that can be formed between a network of Arctic atmospheric observations, much of the SEARCH observatory data are archived in the ARM archive. Instruments will be added to the site over time. For more information, please visit http://www.db.arm.gov/data. The designation for the archived Eureka data is YEU and is now included in the ACRF user metrics. This quarterly report provides the cumulative numbers of visitors and user accounts by site for the period January 1, 2007 - December 31, 2007. Table 2 shows the summary of cumulative users for the period January 1, 2007 - December 31, 2007. For the first quarter of FY 2008, the overall number of users was up significantly from the last reporting period. For the fourth consecutive reporting period, a record high number of Archive users was recorded. In addition, the number of visitors and visitor days set a new record this reporting period particularly due to the large number of field campaign activities in conjunction with the AMF deployment in Germany. It is interesting to note this quarter that 22% (a slight decrease from last quarter) of the Archive users are ARM Science funded principal investigators and 35% (the same as last quarter) of all other facility users are either ARM Science-funded principal investigators or ACRF infrastructure personnel. For reporting purposes, the three ACRF sites and the AMF operate 24 hours per day, 7 days per week, and 52 weeks per year. Time is reported in days instead of hours. If any lost work time is incurred by any employee, it is counted as a workday loss. Table 3 reports the consecutive days since the last recordable or reportable injury or incident causing damage to property, equipment, or vehicle for the period October 1 - December 31, 2007. There were no incidents this reporting period.