Powered by Deep Web Technologies
Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

High coking value pitch  

SciTech Connect (OSTI)

A high coking value pitch prepared from coal tar distillate and has a low softening point and a high carbon value while containing substantially no quinoline insolubles is disclosed. The pitch can be used as an impregnant or binder for producing carbon and graphite articles.

Miller, Douglas J.; Chang, Ching-Feng; Lewis, Irwin C.; Lewis, Richard T.

2014-06-10T23:59:59.000Z

2

Delayed coking of decant oil and coal in a laboratory-scale coking unit  

SciTech Connect (OSTI)

In this paper, we describe the development of a laboratory-scale delayed coker and present results of an investigation on the recovered liquid from the coking of decant oil and decant oil/coal mixtures. Using quantitative gas chromatography/mass spectroscopy (GC/MS) and {sup 1}H and {sup 13}C NMR, a study was made of the chemical composition of the distillate liquids isolated from the overheads collected during the coking and co-coking process. {sup 1}H and {sup 13}C NMR analyses of combined liquids from coking and co-coking did not show any substantial differences. These NMR results of coking and co-coking liquids agree with those of GC/MS. In these studies, it was observed that co-coking with coal resulted in a decrease in the paraffins contents of the liquid. The percentage of cycloparaffins, indenes, naphthalenes, and tetralins did not change significantly. In contrast, alkyl benzenes and polycyclic aromatic hydrocarbons in the distillate were higher in the co-coking experiments which may have resulted from the distillation of thermally cracked coal macromolecules and the contribution of these molecules to the overall liquid composition. 40 refs., 3 figs., 13 tabs.

Oemer Guel; Leslie R. Rudnick; Harold H. Schobert [Pennsylvania State University Park, PA (United States). Energy Institute, C205 Coal Utilization Laboratory

2006-08-15T23:59:59.000Z

3

Fundamentals of Delayed Coking Joint Industry Project  

SciTech Connect (OSTI)

Delayed coking evolved steadily over the early to mid 1900s to enable refiners to convert high boiling, residual petroleum fractions to light products such as gasoline. Pound for pound, coking is the most energy intensive of any operation in a modern refinery. Large amounts of energy are required to heat the thick, poor-quality petroleum residuum to the 900 to 950 degrees F required to crack the heavy hydrocarbon molecules into lighter, more valuable products. One common misconception of delayed coking is that the product coke is a disadvantage. Although coke is a low valued (near zero economic value) byproduct, compared to transportation fuels, there is a significant worldwide trade and demand for coke as it is an economical fuel. Coke production has increased steadily over the last ten years, with further increases forecast for the foreseeable future. Current domestic production is near 111,000 tons per day. A major driving force behind this increase is the steady decline in crude quality available to refiners. Crude slates are expected to grow heavier with higher sulfur contents while environmental restrictions are expected to significantly reduce the demand for high-sulfur residual fuel oil. Light sweet crudes will continue to be available and in even greater demand than they are today. Refiners will be faced with the choice of purchasing light sweet crudes at a premium price, or adding bottom of the barrel upgrading capability, through additional new investments, to reduce the production of high-sulfur residual fuel oil and increase the production of low-sulfur distillate fuels. A second disadvantage is that liquid products from cokers frequently are unstable, i.e., they rapidly form gum and sediments. Because of intermediate investment and operating costs, delayed coking has increased in popularity among refiners worldwide. Based on the 2000 Worldwide Refining Survey published in the Oil and Gas, the delayed coking capacity for 101 refineries around the world is 2,937,439 barrels/calendar day. These cokers produce 154,607 tons of coke per day and delayed coking accounts for 88% of the world capacity. The delayed coking charge capacity in the United States is 1,787,860 b/cd. Despite its wide commercial use, only relatively few contractors and refiners are truly knowledgeable in delayed-coking design, so that this process carries with it a ''black art'' connotation. Until recently, the expected yield from cokers was determined by a simple laboratory test on the feedstock. As a result of Tulsa University's prior related research, a process model was developed that with additional work could be used to optimize existing delayed cokers over a wide range of potential feedstocks and operating conditions. The objectives of this research program are to: utilize the current micro, batch and pilot unit facilities at The University of Tulsa to enhance the understanding of the coking process; conduct additional micro and pilot unit tests with new and in-house resids and recycles to make current optimization models more robust; conduct focused kinetic experiments to enhance the furnace tube model and to enhance liquid production while minimizing sulfur in the products; conduct detailed foaming studies to optimize the process and minimize process upsets; quantify the parameters that affect coke morphology; and to utilize the knowledge gained from the experimental and modeling studies to enhance the computer programs developed in the previous JIP for optimization of the coking process. These refined computer models will then be tested against refinery data provided by the member companies. Novel concepts will also be explored for hydrogen sulfide removal of furnace gases as well as gas injection studies to reduce over-cracking. The following deliverables are scheduled from the two projects of the three-year JIP: (1) A novel method for enhancing liquid yields from delayed cokers and data that provide insight as to the optimum temperature to remove hydrogen sulfide from furnace gases. (2) An understanding of what causes foaming in c

Michael Volk Jr; Keith Wisecarver

2005-10-01T23:59:59.000Z

4

Fundamentals of Delayed Coking Joint Industry Project  

SciTech Connect (OSTI)

The coking test facilities include three reactors (or cokers) and ten utilities. Experiments were conducted using the micro-coker, pilot-coker, and stirred-batch coker. Gas products were analyzed using an on-line gas chromatograph. Liquid properties were analyzed in-house using simulated distillation (HP 5880a), high temperature gas chromatography (6890a), detailed hydrocarbon analysis, and ASTM fractionation. Coke analyses as well as feedstock analyses and some additional liquid analyses (including elemental analyses) were done off-site.

Volk Jr., Michael; Wisecarver, Keith D.; Sheppard, Charles M.

2003-02-07T23:59:59.000Z

5

Blast furnace coke quality in relation to petroleum coke addition  

SciTech Connect (OSTI)

The incorporation of petroleum coke as an additive in industrial coking coal blends is a practice often used by steel companies. A suitable blast furnace coke produced by replacing part of the coking coal blend with a suitable petroleum coke (addition of 5 to 15%), was made by Great Lakes Carbon Corporation and successfully tested at several blast furnaces. This coke had lower reactivity, less ash and slightly higher sulfur content than coke made without the addition of petroleum coke. In contrast with these results, it has been reported in a BCRA study that additions of petroleum coke to a strong coking coal, above 5 wt%, increased coke reactivity. These differences may be explained on the basis of the coal or blend characteristics to which petroleum coke is added. Petroleum coke addition seems to give better results if the coal/blend has high fluidity. The present situation in Spain is favorable for the use of petroleum coke. So, a study of laboratory and semi-industrial scale was made to assess the possibility of using petroleum coke as an additive to the typical industrial coal blend coked by the Spanish Steel Company, ENSIDESA. The influence of the petroleum coke particle size was also studied to semi-industrial scale.

Alvarez, R.; Diez, M.A.; Menendez, J.A.; Barriocanal, C.; Pis, J.J. [CSIC, Oviedo (Spain). Inst. Nacional del Carbon; Sirgado, M. [ENSIDESA, Aviles (Spain)

1995-12-01T23:59:59.000Z

6

Western Canadian coking coals -- Thermal rheology and coking quality  

SciTech Connect (OSTI)

Methods of predicting coke strength developed from the thermal rheological properties of Carboniferous coals frequently indicate that Cretaceous coals would not make high quality coke -- yet both types of coals produce coke suitable for the iron blast furnace. This paper will discuss the reasons why Western Canadian coals exhibit lower rheological values and how to predict the strength of coke produced from them.

Leeder, W.R. [Teck Corp. (Canada); Price, J.T.; Gransden, J.F. [CANMET Energy Technology Centre, Ottawa, Ontario (Canada)

1997-12-31T23:59:59.000Z

7

Met coke world summit 2005  

SciTech Connect (OSTI)

Papers are presented under the following session headings: industry overview and market outlook; coke in the Americas; the global coke industry; and new developments. All the papers (except one) only consist of a copy of the overheads/viewgraphs.

NONE

2005-07-01T23:59:59.000Z

8

Coking and gasification process  

DOE Patents [OSTI]

An improved coking process for normally solid carbonaceous materials wherein the yield of liquid product from the coker is increased by adding ammonia or an ammonia precursor to the coker. The invention is particularly useful in a process wherein coal liquefaction bottoms are coked to produce both a liquid and a gaseous product. Broadly, ammonia or an ammonia precursor is added to the coker ranging from about 1 to about 60 weight percent based on normally solid carbonaceous material and is preferably added in an amount from about 2 to about 15 weight percent.

Billimoria, Rustom M. (Houston, TX); Tao, Frank F. (Baytown, TX)

1986-01-01T23:59:59.000Z

9

Characterization of liquids derived from laboratory coking of decant oil and co-coking of Pittsburgh seam bituminous coal with decant oil  

SciTech Connect (OSTI)

In this study, decant oil and a blend of Pittsburgh seam bituminous coal with decant oil were subjected to coking and co-coking in a laboratory-scale delayed coker. Higher yields of coke and gas were obtained from co-coking than from coking. Coal addition into the feedstock resulted in lighter overhead liquid. GC/MS analyses of gasoline, jet fuel, and diesel show that co-coking of coal/decant oil gave higher quantity aromatic components than that of coking of decant oil alone. Simulated distillation gas chromatography analyses of overhead liquids and GC/MS analyses of vacuum fractions show that when coal was reacted with a decant oil, the coal constituents contributed to the distillable liquids. To address the reproducibility of the liquid products, overhead liquid samples collected at the first, third, and fifth hours of experiments of 6 h duration were evaluated using simulated distillation gas chromatography and {sup 1}H and {sup 13}C NMR. NMR analyses of the liquid products showed that, even though there were slight changes in the {sup 1}H and {sup 13}C spectra, the standard deviation was low for the time-dependent samples. Simulated distillation gas chromatography showed that the yields of refinery boiling range materials (i.e., gasoline, jet fuel, diesel, and fuel oil cuts) were reproducible between runs. Fractionation of the overhead liquids into refinery boiling range materials (gasoline, jet fuel, diesel, fuel oil fractions) showed that the boiling range materials and chemical compositions of fractions were found to be reproducible. 54 refs., 17 tabs.

Omer Gul; Caroline Clifford; Leslie R. Rudnick; Harold H. Schobert [Pennsylvania State University, University Park, PA (United States)

2009-05-15T23:59:59.000Z

10

Design and construction of coke battery 1A at Radlin coke plant, Poland  

SciTech Connect (OSTI)

In the design and construction of coke battery 1A at Radlin coke plant (Poland), coking of rammed coke with a stationary system was employed for the first time. The coke batteries are grouped in blocks. Safety railings are provided on the coke and machine sides of the maintenance areas.

A.M. Kravchenko; D.P. Yarmoshik; V.B. Kamenyuka; G.E. Kos'kova; N.I. Shkol'naya; V.V. Derevich; A.S. Grankin [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

11

COKEMASTER: Coke plant management system  

SciTech Connect (OSTI)

To keep coke utilization in ironmaking as competitive as possible, the potential to improve the economics of coke production has to be utilized. As one measure to meet this need of its customers, Krupp Koppers has expanded its existing ECOTROL computer system for battery heating control to a comprehensive Coke Plant Management System. Increased capacity utilization, lower energy consumption, stabilization of plant operation and ease of operation are the main targets.

Johanning, J.; Reinke, M. [Krupp Koppers GmbH, Essen (Germany)

1996-12-31T23:59:59.000Z

12

Coke from coal and petroleum  

DOE Patents [OSTI]

A carbonaceous coke is manufactured by the delayed coking of a slurry mixture of from about 10 to about 30 weight percent of caking or non-caking coal and the remainder a petroleum resid blended at below 50.degree. C.

Wynne, Jr., Francis E. (Allison Park, PA); Lopez, Jaime (Pittsburgh, PA); Zaborowsky, Edward J. (Harwick, PA)

1981-01-01T23:59:59.000Z

13

Catalytic Distillation  

E-Print Network [OSTI]

removing both will occur in the temperature range ne~ded high and low boilers to maintain the tower for reaction. One limitation may be .I the composition profile, exothermic reactions critical point of the system, above w~ich can be easily temperature... with significantly less energy. There are two primary reasons for energy reduction: 1. The heat of reaction for exothermic reactions is fully re covered as useful boilup for fractionation. 2. Fewer attendant distillations are normally required than for a...

Smith, L. A., Jr.; Hearn, D.; Wynegar, D. P.

1984-01-01T23:59:59.000Z

14

Converting Petroleum Coke to Electricity  

E-Print Network [OSTI]

contributes 80% of this total. As crude oil coke is a cement kiln, where the alkaline quality deteriorates, and the market for residual components in cement will absorb the sulfur oil. becomes less profitable due to increasingly released by the coke during.... The higher value has been amply demonstrated by the Combustion Power Units, and by commercial gasification systems producing syngas for chemicals We do not anticipate a major system availability debit for adding an industrial-scale, base loaded...

Pavone, A.

15

New coke-sorting system at OAO Koks  

SciTech Connect (OSTI)

A new coke-sorting system has been introduced at OAO Koks. It differs from the existing system in that it has no bunkers for all-purpose coke but only bunkers for commercial coke. In using this system with coke from battery 4, the crushing of the coke on conveyer belts, at roller screens, and in the commercial-coke bunkers is studied. After installing braking elements in the coke path, their effectiveness in reducing coke disintegration and improving coke screening is investigated. The granulometric composition and strength of the commercial coke from coke battery 3, with the new coke-sorting system, is evaluated.

B.Kh. Bulaevskii; V.S. Shved; Yu.V. Kalimin; S.D. Filippov [OAO Koks, Kemerovo (Russian Federation)

2009-05-15T23:59:59.000Z

16

Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) Geographic Area Month Kerosene No. 1 Distillate No. 2...

17

Trends in the automation of coke production  

SciTech Connect (OSTI)

Up-to-date mathematical methods, such as correlation analysis and expert systems, are employed in creating a model of the coking process. Automatic coking-control systems developed by Giprokoks rule out human error. At an existing coke battery, after introducing automatic control, the heating-gas consumption is reduced by {>=}5%.

R.I. Rudyka; Y.E. Zingerman; K.G. Lavrov [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

18

Clean Production of Coke from Carbonaceous Fines  

SciTech Connect (OSTI)

In order to produce steel (a necessary commodity in developed nations) using conventional technologies, you must have metallurgical coke. Current coke-making technology pyrolyzes high-quality coking coals in a slot oven, but prime coking coals are becoming more expensive and slot ovens are being shut-down because of age and environmental problems. The United States typically imports about 4 million tons of coke per year, but because of a world-wide coke scarcity, metallurgical coke costs have risen from about $77 per tonne to more than $225. This coke shortage is a long-term challenge driving up the price of steel and is forcing steel makers to search for alternatives. Combustion Resources (CR) has developed a technology to produce metallurgical coke from alternative feedstocks in an environmentally clean manner. The purpose of the current project was to refine material and process requirements in order to achieve improved economic benefits and to expand upon prior work on the proposed technology through successful prototype testing of coke products. The ultimate objective of this project is commercialization of the proposed technology. During this project period, CR developed coke from over thirty different formulations that meet the strength and reactivity requirements for use as metallurgical coke. The technology has been termed CR Clean Coke because it utilizes waste materials as feedstocks and is produced in a continuous process where pollutant emissions can be significantly reduced compared to current practice. The proposed feed material and operating costs for a CR Clean Coke plant are significantly less than conventional coke plants. Even the capital costs for the proposed coke plant are about half that of current plants. The remaining barrier for CR Clean Coke to overcome prior to commercialization is full-scale testing in a blast furnace. These tests will require a significant quantity of product (tens of thousands of tons) necessitating the construction of a demonstration facility. Talks are currently underway with potential partners and investors to build a demonstration facility that will generate enough coke for meaningful blast furnace evaluation tests. If the testing is successful, CR Clean Coke could potentially eliminate the need for the United States to import any coke, effectively decreasing US Steel industry dependence on foreign nations and reducing the price of domestic steel.

Craig N. Eatough

2004-11-16T23:59:59.000Z

19

Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Marketing Annual 1998 359 Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) - Continued...

20

Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils...  

Gasoline and Diesel Fuel Update (EIA)

Marketing Annual 1999 359 Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) - Continued...

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene...  

Gasoline and Diesel Fuel Update (EIA)

Marketing Annual 1996 401 Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) - Continued...

22

Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Marketing Annual 1997 401 Table 50. Prime Supplier Sales Volumes of Distillate Fuel Oils and Kerosene by PAD District and State (Thousand Gallons per Day) - Continued...

23

Mathematical modeling of clearance between wall of coke oven and coke cake  

SciTech Connect (OSTI)

A mathematical model was developed for estimating the clearance between the wall of the coke oven and the coke cake. The prediction model is based on the balance between the contractile force and the coking pressure. A clearance forms when the contractile force exceeds the coking pressure in this model. The contractile force is calculated in consideration of the visco-elastic behavior of the thermal shrinkage of the coke. The coking pressure is calculated considering the generation and dispersion of gas in the melting layer. The relaxation time off coke used in this model was obtained with a dilatometer under the load application. The clearance was measured by the laser sensor, and the internal gas pressure was measured in a test oven. The clearance calculated during the coking process were in good agreement with the experimental results, which supported the validity of the mathematical model.

Nushiro, K.; Matsui, T.; Hanaoka, K.; Igawa, K.; Sorimachi, K.

1995-12-01T23:59:59.000Z

24

INNOVATION EDUCATION EXCELLENCE DISTILLATIONS  

E-Print Network [OSTI]

INNOVATION · EDUCATION · EXCELLENCE DISTILLATIONS University of Toronto CHEMISTRY ALUMNI MAGAZINE.utoronto.ca / distillations 2012 MessagefromtheChair Our Department of Chemistry has one of the finest collection of peo- ple to a better, more sustain- able future. This issue of Distillations highlights the accomplishments last year

Chan, Hue Sun

25

Development of automatic operation system for coke oven machines at Yawata Works of Nippon Steel Corporation  

SciTech Connect (OSTI)

The coke plant is a working environment involving heavy dust emissions, high heat and demanding physical labor. The labor-saving operation of the coke plant is an essential issue from the standpoints of not only improvement in working environment, but also reduction in fixed cost by enhancement of labor productivity. Under these circumstances, Nippon Steel has implemented the automation of coke oven machines. The first automatic operation system for coke oven machinery entered service at Oita Works in 1992, followed by the second system at the No. 5 coke oven battery of the coke plant at Yawata Works. The Yawata automatic operation system is characterized by the installation of coke oven machinery to push as many as 140 ovens per day within a short cycle time, such as a preliminary ascension pipe cap opening car and cycle time simulator by the manned operation of the pusher, which is advantageous from the standpoint of investment efficiency, and by the monitoring of other oven machines by the pusher. These measures helped to reduce the manpower requirement to 2 persons per shift from 4 persons per shift. The system entered commercial operation in March, 1994 and has been smoothly working with an average total automatic rate of 97%. Results from the startup to recent operation of the system are reported below.

Matsunaga, Masao; Uematsu, Hiroshi; Nakagawa, Yoji; Ishiharaguchi, Yuji

1995-12-01T23:59:59.000Z

26

Coke cake behavior under compressive forces  

SciTech Connect (OSTI)

The deformation of the coke cake and load on the side wall during pushing were studied using an electric furnace equipped with a movable wall. Coke cake was found to deform in three stages under compressive forces. The coke cake was shortened in the pushing direction in the cake deformation stage, and load was generated on the side walls in the high wall load stage. Secondary cracks in the coke cake were found to prevent load transmission on the wall. The maximum load transmission rate was controlled by adjusting the maximum fluidity and mean reflectance of the blended coal.

Watakabe, S.; Takeda, T.; Itaya, H.; Suginobe, H.

1997-12-31T23:59:59.000Z

27

Collector main replacement at Indianapolis Coke  

SciTech Connect (OSTI)

Indianapolis Coke is a merchant coke producer, supplying both foundry and blast furnace coke to the industry. The facility has three coke batteries: two 3 meter batteries, one Wilputte four divided and one Koppers Becker. Both batteries are underjet batteries and are producing 100% foundry coke at a net coking time of 30.6 hours. This paper deals with the No. 1 coke battery, which is a 72 oven, gun fired, 5 meter Still battery. No. 1 battery produces both foundry and blast furnace coke at a net coking rate of 25.4 hours. No. 1 battery was commissioned in 1979. The battery is equipped with a double collector main. Although many renovations have been completed to the battery, oven machinery and heating system, to date no major construction projects have taken place. Deterioration of the collector main was caused in part from elevated levels of chlorides in the flushing liquor, and temperature fluctuations within the collector main. The repair procedures are discussed.

Sickle, R.R. Van

1997-12-31T23:59:59.000Z

28

Factors affecting coking pressures in tall coke ovens  

SciTech Connect (OSTI)

The detrimental effects of excessive coking pressures, resulting in the permanent deformation of coke oven walls, have been recognized for many years. Considerable research has been undertaken worldwide in attempts to define the limits within which a plant may safely operate and to quantify the factors which influence these pressures. Few full scale techniques are available for assessing the potential of a coal blend for causing wall damage. Inference of dangerous swelling pressures may be made however by the measurement of the peak gas pressure which is generated as the plastic layers meet and coalesce at the center of the oven. This pressure is referred to in this report as the carbonizing pressure. At the Dawes Lane cokemaking plant of British Steel`s Scunthorpe Works, a large database has been compiled over several years from the regulator measurement of this pressure. This data has been statistically analyzed to provide a mathematical model for predicting the carbonizing pressure from the properties of the component coals, the results of this analysis are presented in this report.

Grimley, J.J.; Radley, C.E. [British Steel plc, Scunthorpe (United Kingdom). Scunthorpe Works

1995-12-01T23:59:59.000Z

29

New designs in the reconstruction of coke-sorting systems  

SciTech Connect (OSTI)

In recent Giprokoks designs for the reconstruction of coke-sorting systems, high-productivity vibrational-inertial screens have been employed. This permits single-stage screening and reduction in capital and especially operating expenditures, without loss of coke quality. In two-stage screening, >80 mm coke (for foundry needs) is additionally separated, with significant improvement in quality of the metallurgical coke (25-80 mm). New designs for the reconstruction of coke-sorting systems employ mechanical treatment of the coke outside the furnace, which offers new scope for stabilization of coke quality and permits considerable improvement in mechanical strength and granulometric composition of the coke by mechanical crushing.

A.S. Larin; V.V. Demenko; V.L. Voitanik [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

30

Simulation of industrial coking -- Phase 1  

SciTech Connect (OSTI)

Two statistically designed experimental programs using an Appalachian and a Western Canadian coal blend were run in CANMET`s 460mm (18 inch) movable wall oven. Factors included coal grind, moisture, oil addition, carbonization rate and final coke temperature. Coke quality parameters including CSR, coal charge characteristics and pressure generation were analyzed.

Todoschuk, T.W.; Price, J.T.; Gransden, J.F.

1997-12-31T23:59:59.000Z

31

Coke oven gas injection to blast furnaces  

SciTech Connect (OSTI)

U.S. Steel has three major facilities remaining in Pennsylvania`s Mon Valley near Pittsburgh. The Clairton Coke Works operates 12 batteries which produce 4.7 million tons of coke annually. The Edgar Thomson Works in Braddock is a 2.7 million ton per year steel plant. Irvin Works in Dravosburg has a hot strip mill and a range of finishing facilities. The coke works produces 120 mmscfd of coke oven gas in excess of the battery heating requirements. This surplus gas is used primarily in steel re-heating furnaces and for boiler fuel to produce steam for plant use. In conjunction with blast furnace gas, it is also used for power generation of up to 90 MW. However, matching the consumption with the production of gas has proved to be difficult. Consequently, surplus gas has been flared at rates of up to 50 mmscfd, totaling 400 mmscf in several months. By 1993, several changes in key conditions provided the impetus to install equipment to inject coke oven gas into the blast furnaces. This paper describes the planning and implementation of a project to replace natural gas in the furnaces with coke oven gas. It involved replacement of 7 miles of pipeline between the coking plants and the blast furnaces, equipment capable of compressing coke oven gas from 10 to 50 psig, and installation of electrical and control systems to deliver gas as demanded.

Maddalena, F.L.; Terza, R.R.; Sobek, T.F.; Myklebust, K.L. [U.S. Steel, Clairton, PA (United States)

1995-12-01T23:59:59.000Z

32

Automatic coke oven heating control system at Burns Harbor for normal and repair operation  

SciTech Connect (OSTI)

An automatic heating control system for coke oven batteries was developed in 1985 for the Burns Harbor No. 1 battery and reported in the 1989 Ironmaking Conference Proceedings. The original system was designed to maintain a target coke temperature at a given production level under normal operating conditions. Since 1989, enhancements have been made to this control system so that it can also control the battery heating when the battery is under repair. The new control system has improved heating control capability because it adjusts the heat input to the battery in response to anticipated changes in the production schedule. During a recent repair of this 82 oven battery, the pushing schedule changed from 102 ovens/day to 88 ovens/day, then back to 102 ovens/day, then to 107 ovens/day. During this repair, the control system was able to maintain the coke temperature average standard deviation at 44 F, with a maximum 75 F.

Battle, E.T.; Chen, K.L. [Bethlehem Steel Corp., Burns Harbor, IN (United States); [Bethlehem Steel Corp., PA (United States)

1997-12-31T23:59:59.000Z

33

Distillate Fuel Oil Days of Supply  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesDataTranslocation oftheAmperometric Detectioneffect of pH andCO in

34

Heat treatment of exchangers to remove coke  

SciTech Connect (OSTI)

This patent describes a process for preparing furfural coke for removal from metallic surfaces. It comprises: heating the furfural coke without causing an evolution of heat capable of undesirably altering metallurgical properties of the surfaces in the presence of a gas containing molecular oxygen at a sufficient temperature below 800{degrees}F (427{degrees}C) for a sufficient time to change the crush strength of the coke so as to permit removal with a water jet at a pressure of five thousand pounds per square inch.

Turner, J.D.

1990-02-20T23:59:59.000Z

35

New and revised standards for coke production  

SciTech Connect (OSTI)

The need for new and revised standards for coke production in Ukraine and Russia is outlined. Such standards should address improvements in plant operation, working conditions, environmental protection, energy conservation, fire and explosion safety, and economic indices.

G.A. Kotsyuba; M.I. Alpatov; Y.G. Shapoval [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

36

Mozambique becomes a major coking coal exporter?  

SciTech Connect (OSTI)

In addition to its potential role as a major international supplier of coking coal, Mozambique will also become a major source of power generation for southern Africa. 3 figs.

Ruffini, A.

2008-06-15T23:59:59.000Z

37

The waste water free coke plant  

SciTech Connect (OSTI)

Apart from coke which is the actual valuable material a coke oven plant also produces a substantial volume of waste water. These effluent water streams are burdened with organic components (e.g. phenols) and inorganic salts (e.g. NH{sub 4}Cl); due to the concentration of the constituents contained therein these effluent waters must be subjected to a specific treatment before they can be introduced into public waters. For some years a lot of separation tasks have been solved successfully by applying the membrane technology. It was especially the growing number of membrane facilities for cleaning of landfill leakage water whose composition can in fact be compared with that of coking plant waste waters (organic constituents, high salt fright, ammonium compounds) which gave Thyssen Still Otto Anlagentechnik the idea for developing a process for coke plant effluent treatment which contains the membrane technology as an essential component.

Schuepphaus, K.; Brink, N. [Thyssen Still Otto Anlagentechnik GmbH, Bochum (Germany)

1995-12-01T23:59:59.000Z

38

Possibilities of coke manufacture in nonpollutant conditions  

SciTech Connect (OSTI)

The paper presents some possibilities to obtain coke briquettes from anthracite, using as binders petroleum pitch, wheat flour, cement, plaster, ashes from power-plants dried from the electrofilters. Specific thermal post-treatment were proposed for each case, such as: oxidation or heating at low temperatures (under 300 C). As a result the authors obtained coke briquettes to be used in small equipment, with no pollutant pyrogenetic treatment.

Barca, F.; Panaitescu, C.; Vidrighin, C.; Peleanu, I. [Politehnica Univ. Bucharest (Romania); Albastroiu, P. [S.C. ICEM S.A., Bucharest (Romania)

1994-12-31T23:59:59.000Z

39

Advanced Distillation Final Report  

SciTech Connect (OSTI)

The Advanced Distillation project was concluded on December 31, 2009. This U.S. Department of Energy (DOE) funded project was completed successfully and within budget during a timeline approved by DOE project managers, which included a one year extension to the initial ending date. The subject technology, Microchannel Process Technology (MPT) distillation, was expected to provide both capital and operating cost savings compared to conventional distillation technology. With efforts from Velocys and its project partners, MPT distillation was successfully demonstrated at a laboratory scale and its energy savings potential was calculated. While many objectives established at the beginning of the project were met, the project was only partially successful. At the conclusion, it appears that MPT distillation is not a good fit for the targeted separation of ethane and ethylene in large-scale ethylene production facilities, as greater advantages were seen for smaller scale distillations. Early in the project, work involved flowsheet analyses to discern the economic viability of ethane-ethylene MPT distillation and develop strategies for maximizing its impact on the economics of the process. This study confirmed that through modification to standard operating processes, MPT can enable net energy savings in excess of 20%. This advantage was used by ABB Lumus to determine the potential impact of MPT distillation on the ethane-ethylene market. The study indicated that a substantial market exists if the energy saving could be realized and if installed capital cost of MPT distillation was on par or less than conventional technology. Unfortunately, it was determined that the large number of MPT distillation units needed to perform ethane-ethylene separation for world-scale ethylene facilities, makes the targeted separation a poor fit for the technology in this application at the current state of manufacturing costs. Over the course of the project, distillation experiments were performed with the targeted mixture, ethane-ethylene, as well as with analogous low relative volatility systems: cyclohexane-hexane and cyclopentane-pentane. Devices and test stands were specifically designed for these efforts. Development progressed from experiments and models considering sections of a full scale device to the design, fabrication, and operation of a single-channel distillation unit with integrated heat transfer. Throughout the project, analytical and numerical models and Computational Fluid Dynamics (CFD) simulations were validated with experiments in the process of developing this platform technology. Experimental trials demonstrated steady and controllable distillation for a variety of process conditions. Values of Height-to-an-Equivalent Theoretical Plate (HETP) ranging from less than 0.5 inch to a few inches were experimentally proven, demonstrating a ten-fold performance enhancement relative to conventional distillation. This improvement, while substantial, is not sufficient for MPT distillation to displace very large scale distillation trains. Fortunately, parallel efforts in the area of business development have yielded other applications for MPT distillation, including smaller scale separations that benefit from the flowsheet flexibility offered by the technology. Talks with multiple potential partners are underway. Their outcome will also help determine the path ahead for MPT distillation.

Maddalena Fanelli; Ravi Arora; Annalee Tonkovich; Jennifer Marco; Ed Rode

2010-03-24T23:59:59.000Z

40

Kinetics and thermodynamics of hydrotreating synthetic middle distillates  

SciTech Connect (OSTI)

Middle distillates from the Tar Sands deposits in Alberta are an important component of diesel and jet fuels in the Canadian market. Commercial catalysts based on sulfided Ni-Mo and Ni-W are currently used to hydrogenate synthetic distillates to improve the cetane number and smoke point. In previous work {sup 13}C NMR was used to study the kinetics of overall hydrogenation of aromatics over sulfided Co-Mo, Ni-Mo and Ni-W catalysts. Arrhenius parameters were obtained for hydrogenation over sulfided Ni-W catalyst for a similar distillate feedstock. In the latter study, mass spectrometry was used to quantitate the three major aromatic hydrocarbon group types in the feed and products. In this study, liquid products from hydrotreating experiments with a hydrotreated distillate from delayed coking of Athabasca bitumen and sulfided Co-Mo and Ni-Mo catalysts have been analyzed by mass spectrometry. This completes a preliminary comparison of the kinetics of hydrogenation of alkylbenzenes, benzocycloparaffins and benzodicycloparaffins, the three major aromatic hydrocarbon types in these distillates.

Fisher, I.P. (Petro-Canada R and D Dept., Sheridan Park, Ontario (Canada)); Wilson, M.F. (CANMET, Ottawa, Ontario (Canada))

1987-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Physical, chemical and thermal changes of coals and coal maceral concentrates during coke formation.  

E-Print Network [OSTI]

??Research Doctorate - Doctor of Philosophy (PhD) The measured coke reactivity index (CRI) and coke strength after reaction (CSR) determined in experiments based on coke… (more)

Xie, Wei

2013-01-01T23:59:59.000Z

42

Giprokoks proposals for improvement in air quality at coke battery 1A of Radlin coke plant  

SciTech Connect (OSTI)

Coke battery 1A, which uses rammed batch, has gone into production at Radlin coke plant (Poland), on the basis of Giprokoks designs. Up-to-date dust-trapping methods are used for the first time within the aspiration systems in the coal-preparation shop and in improving dust collection within the production buildings.

T.F. Trembach; A.G. Klimenko [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

43

Unmanned operation of the coke guides at Hoogovens IJmuiden Coke Plant 1  

SciTech Connect (OSTI)

Due to the bad condition of batteries and many ovens under repair, Hoogovens was forced to partially repair and rebuild the Coke plant No. 1. The production of coke at Coke plant No. 1 is realized in 3 production blocks subdivided in 6 batteries. Besides a renovated installation, all coke oven machines were renewed. A total of five identical machine sets are available. Each consists of a pusher machine, larry car, coke guide and quench car with diesel locomotive. A complete automated control system was implemented. The main objectives were a highly regular coking and pushing process, automated traveling and positioning and a centrally coordinated interlocking of machine functions. On each operational machine however an operator performed the supervisory control of the automated machine functions. After years of good experience with the automated system, economical reasons urged further personnel reduction from 1994 on. Totally 375 people were involved, including the maintenance department. To reduce the occupation at coke plant No. 1, the coke guide was the first machine to be fully automated because of the isolated and uncomfortable working place.

Vos, D.; Mannes, N.; Poppema, B. [Hoogovens IJmuiden B.V. (Netherlands)

1995-12-01T23:59:59.000Z

44

Investigation of bonding mechanism of coking on semi-coke from lignite with pitch and tar  

SciTech Connect (OSTI)

In coking, the bonding ability of inert macerals by reactive macerals is dependent on various parameters and also is related to the wettability of the inert macerals. In this study, the effect of carbonization temperature on the wettability of semi-cokes produced at various temperatures has been investigated. Soma and Yatagan semicokes represent inert macerals, and pitch was used as a reactive structure in the experiments. The briquetted pitch blocks were located on the semi-cokes and heated from the softening temperature of pitch (60{sup o}C) to 140{sup o}C to observe the wettability. In addition, liquid tar was also used to determine the wettability of semi-cokes. From the standpoint of wettability, the temperature of 900{sup o}C was determined to be the critical point for coke produced from sub-bituminous coals. 15 refs., 6 figs., 2 tabs.

Vedat Arslan [Dokuz Eylul University, Izmir (Turkey). Engineering Faculty

2006-10-15T23:59:59.000Z

45

Distillation: The Efficient Workhorse  

E-Print Network [OSTI]

DISTILLATION: THE EFFICIENT WORKHORSE Dan Steinmeyer Monsanto Company St. Louis, Missouri Distillation is inherently highly efficient: phase separation is clean it is relatively easy to build a mUltistage countercurrent device equilibrium... of separation to the work pmbedded in the reboiler and condenser thermal flows. The right application is one where the streams ? separated both exceed la' of the feed, relative volatility exceeds 1.2, and separation is complete - i.e. pure products...

Steinmeyer, D.

46

Energy efficient distillation apparatus  

SciTech Connect (OSTI)

An energy efficient distillation method is provided which is particularly adapted for use on a dairy farm, and which comprises a distilland evaporating receptacle, a distillate condensing receptacle, and a conduit interconnecting the evaporating receptacle and the condensing receptacle. A vacuum pump is provided for drawing a partial vacuum within the evaporating receptacle, and a vapor compression refrigeration system is provided which includes condenser coils disposed to heat and vaporize the distilland while it is within the evaporating receptacle, and evaporator coils for cooling and condensing the vaporized distilland in the condensing receptacle. A cooling distribution system is also provided whereby a variable portion of the cooling potential of the refrigeration system may be selectively directed to each of the condensing receptacle, a distillate receiver tank, or to a bulk milk container as utilized on a dairy farm or the like.

Melton, J.D.

1982-08-17T23:59:59.000Z

47

Water protection in coke-plant design  

SciTech Connect (OSTI)

Wastewater generation, water consumption, and water management at coke plants are considered. Measures to create runoff-free water-supply and sewer systems are discussed. Filters for water purification, corrosion inhibitors, and biocides are described. An integrated single-phase technology for the removal of phenols, thiocyanides, and ammoniacal nitrogen is outlined.

G.I. Alekseev [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

48

Reducing dust emissions at OAO Alchevskkoks coke battery 10A  

SciTech Connect (OSTI)

Coke battery 10A with rammed batch is under construction at OAO Alchevskkoks. The design documentation developed by Giprokoks includes measures for reducing dust emissions to the atmosphere. Aspiration systems with dry dust trapping are employed in the new components of coke battery 10A and in the existing coke-sorting equipment. Two-stage purification of dusty air in cyclones and bag filters is employed for the coke-sorting equipment. This system considerably reduces coke-dust emissions to the atmosphere.

T.F. Trembach; E.N. Lanina [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

49

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Marketing Annual 1998 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

50

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Marketing Annual 1995 337 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

51

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

U.S. Energy Information Administration (EIA) Indexed Site

Petroleum Marketing Annual 1999 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

52

RESIDUA UPGRADING EFFICIENCY IMPROVEMENT MODELS: COKE FORMATION PREDICTABILITY MAPS  

SciTech Connect (OSTI)

The dispersed particle solution model of petroleum residua structure was used to develop predictors for pyrolytic coke formation. Coking Indexes were developed in prior years that measure how near a pyrolysis system is to coke formation during the coke formation induction period. These have been demonstrated to be universally applicable for residua regardless of the source of the material. Coking onset is coincidental with the destruction of the ordered structure and the formation of a multiphase system. The amount of coke initially formed appears to be a function of the free solvent volume of the original residua. In the current work, three-dimensional coke make predictability maps were developed at 400 C, 450 C, and 500 C (752 F, 842 F, and 932 F). These relate residence time and free solvent volume to the amount of coke formed at a particular pyrolysis temperature. Activation energies for two apparent types of zero-order coke formation reactions were estimated. The results provide a new tool for ranking residua, gauging proximity to coke formation, and predicting initial coke make tendencies.

John F. Schabron; A. Troy Pauli; Joseph F. Rovani Jr.

2002-05-01T23:59:59.000Z

53

Reflux for multifeed distillation  

SciTech Connect (OSTI)

Prior investigations have shown ways to determine minimum reflux for multicomponent distillation. This work extends earlier concepts in order to handle multifeeds. Reflux calculations for each feed, as though it were the only feed, are factored with the reflux effects of the other feeds to give an overall minimum reflux. Each factor has a finite value depending on the composition and thermal quality of the feed it represents.

Chou, S.M.; Yaws, C.L.

1986-12-01T23:59:59.000Z

54

Low Energy Distillation Schemes  

E-Print Network [OSTI]

an important means of reducing energy consumption in distillation processes. However, its conventional use requires the installation of piping (and pipes carrying vapour streams tend to be of large diameter and are consequently expensive). So, finally we.... However, its conventional use requires the installation of piping (and pipes carrying vapour streams tend to be of large diameter and are consequently expensive). In the late eighties engineers in Germany [e.g. Kaibel, 1987] looked at one way in which...

Polley, G. T.

55

REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE  

SciTech Connect (OSTI)

A Powder River Basin subbituminous coal from the North Antelope mine and a petroleum shot coke were received from Northern States Power Company (NSP) for testing the effects of parent fuel properties on coal-coke blend grindability and evaluating the utility of petroleum coke blending as a strategy for improving electrostatic precipitator (ESP) particulate collection efficiency. Petroleum cokes are generally harder than coals, as indicated by Hardgrove grindability tests. Therefore, the weaker coal component may concentrate in the finer size fractions during the pulverizing of coal-coke blends. The possibility of a coal-coke size fractionation effect is being investigated because it may adversely affect combustion performance. Although the blending of petroleum coke with coal may adversely affect combustion performance, it may enhance ESP particulate collection efficiency. Petroleum cokes contain much higher concentrations of V relative to coals. Consequently, coke blending can significantly increase the V content of fly ash resulting from coal-coke combustion. Pentavalent vanadium oxide (V{sub 2}O{sub 5}) is a known catalyst for transforming gaseous sulfur dioxide (SO{sub 2}[g]) to gaseous sulfur trioxide (SO{sub 3}[g]). The presence of SO{sub 3}(g) strongly affects fly ash resistivity and, thus, ESP performance.

NONE

1998-09-01T23:59:59.000Z

56

Model based control of a coke battery  

SciTech Connect (OSTI)

This paper describes a model-based strategy for coke battery control at BHP Steel`s operations in Pt Kembla, Australia. The strategy uses several models describing the battery thermal and coking behavior. A prototype controller has been installed on the Pt Kembla No. 6 Battery (PK6CO). In trials, the new controller has been well accepted by operators and has resulted in a clear improvement in battery thermal stability, with a halving of the standard deviation of average battery temperature. Along with other improvements to that battery`s operations, this implementation has contributed to a 10% decrease in specific battery energy consumption. A number of enhancements to the low level control systems on that battery are currently being undertaken in order to realize further benefits.

Stone, P.M.; Srour, J.M.; Zulli, P. [BHP Research, Mulgrave (Australia). Melbourne Labs.; Cunningham, R.; Hockings, K. [BHP Steel, Pt Kembla, New South Wales (Australia). Coal and Coke Technical Development Group

1997-12-31T23:59:59.000Z

57

Cyanide treatment options in coke plants  

SciTech Connect (OSTI)

The paper discusses the formation of cyanides in coke oven gas and describes and compares waste processing options. These include desulfurization by aqueous ammonia solution, desulfurization using potash solution, desulfurization in oxide boxes, decomposition of NH{sub 3} and HCN for gas scrubbing. Waste water treatment methods include chemical oxidation, precipitation, ion exchange, reverse osmosis, and biological treatment. It is concluded that biological treatment is the most economical process, safe in operation and requires a minimum of manpower.

Minak, H.P.; Lepke, P. [Krupp Uhde GmbH, Dortmund (Germany)

1997-12-31T23:59:59.000Z

58

Coking properties of perhydrous low-rank vitrains. Influence of pyrolysis conditions  

E-Print Network [OSTI]

generally lead to increased coking potential of coals characterised in the resulting cokes by large sizes equivalent to natural coking coals, since the cokes from these residues are always made of smaller MOD than those obtained for coking coals. For comparison, a similar characterisation, carried out

Paris-Sud XI, Université de

59

Table 23. Coal Receipts at Coke Plants by Census Division  

U.S. Energy Information Administration (EIA) Indexed Site

Division (thousand short tons) U.S. Energy Information Administration | Quarterly Coal Report, April - June 2014 Table 23. Coal Receipts at Coke Plants by Census Division...

60

Reducing power production costs by utilizing petroleum coke. Annual report  

SciTech Connect (OSTI)

A Powder River Basin subbituminous coal from the North Antelope mine and a petroleum shot coke were received from Northern States Power Company (NSP) for testing the effects of parent fuel properties on coal-coke blend grindability and evaluating the utility of petroleum coke blending as a strategy for improving electrostatic precipitator (ESP) particulate collection efficiency. Petroleum cokes are generally harder than coals, as indicated by Hardgrove grindability tests. Therefore, the weaker coal component may concentrate in the finer size fractions during the pulverizing of coal-coke blends. The possibility of a coal-coke size fractionation effect is being investigated because it may adversely affect combustion performance, it may enhance ESP particulate collection efficiency. Petroleum cokes contain much higher concentrations of V relative to coals. Consequently, coke blending can significantly increase the V content of fly ash resulting from coal-coke combustion. Pentavalent vanadium oxide (V{sub 2}O{sub 5}) is a known catalyst for transforming gaseous sulfur dioxide (SO{sub 2}[g]) to gaseous sulfur trioxide (SO{sub 3}[g]). The presence of SO{sub 3}(g) strongly affects fly ash resistivity and, thus, ESP performance.

Galbreath, K.C.

1998-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

The methods of steam coals usage for coke production  

SciTech Connect (OSTI)

Nowadays, high volatile bituminous coals are broadly used for metallurgical coke production in Russia. The share of such coals in the coking blend is variable from 20 to 40% by weight. There are some large coal deposits in Kuznetskii basin which have coals with low caking tendency. The low caking properties of such coals limit of its application in the coking process. At the same time the usage of low caking coals for coke production would allow flexibility of the feedstock for coke production. Preliminary tests, carried out in COAL-C's lab has shown some differences in coal properties with dependence on the size distribution. That is why the separation of the well-caking fraction from petrographically heterogeneous coals and its further usage in coking process may be promising. Another way for low caking coals application in the coke industry is briquettes production from such coals. This method has been known for a very long time. It may be divided into two possible directions. First is a direct coking of briquettes from the low caking coals. Another way is by adding briquettes to coal blends in defined proportion and combined coking. The possibility of application of coal beneficiation methods mentioned above was investigated in present work.

Korobetskii, I.A.; Ismagilov, M.S.; Nazimov, S.A.; Sladkova, I.L.; Shudrikov, E.S.

1998-07-01T23:59:59.000Z

62

DELAYED COKING OF SOLVENT EXTRACTED COAL FOR PRODUCTION OF ANODE GRADE COKE: CHARACTERIZATION OF SOLID AND LIQUID PRODUCTS.  

E-Print Network [OSTI]

??This study investigates the feasibility of using high temperature solvent extraction of coal to produce feedstock for the production of anode grade coke through delayed… (more)

Karri, Vamsi

2011-01-01T23:59:59.000Z

63

Development of an Advanced Combined Heat and Power (CHP) System Utilizing Off-Gas from Coke Calcination  

Broader source: Energy.gov [DOE]

Coke calcination is a process that involves the heating of green petroleum coke in order to remove volatile material and purify the coke for further processing. Calcined coke is vital to the...

64

Dry purification of aspirational air in coke-sorting systems with wet slaking of coke  

SciTech Connect (OSTI)

Coke transportation after wet slaking is accompanied by the release of dust in the production building and in the surrounding atmosphere. Wet methods are traditionally used to purify very humid air. Giprokoks has developed designs for highly efficient dry dust-removal methods in such conditions.

T.F. Trembach; A.G. Klimenko [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

65

Coke Gasification - A Solution to Excess Coke Capacity and High Energy Costs  

E-Print Network [OSTI]

effectively to produce medium-Btu (300 Btu/scf) gas which, in turn, can fuel the refinery furnaces to replace natural gas. Coke gasification should prove economical with natural gas price decontrol and the average price projected to rise to over $14.0 per...

1982-01-01T23:59:59.000Z

66

Theoretical and experimental investigations into the particular features of the process of converting coal gas hydrocarbons on incandescent coke  

SciTech Connect (OSTI)

The prospects of the use of reducing gases in ferrous metallurgy and the possibilities for using them as a basis for coke production have been presented by the authors of the present article in the past. In the present report, the authors present certain results of theoretical and experimental investigations into the process of converting coal gas hydrocarbons on incandescent coke. The modification of the present-day method of thermodynamically calculating stable compositions of coking products, which was developed by the authors, has made it possible to apply it to specific chemical systems and process conditions not met with before, such as the conversion of hydrocarbons in mixtures of actual industrial gases (coal gas and blast furnace gas) in the presence of carbon and considerable amounts of hydrogen.

Zubilin, I.G.; Umanskii, V.E.

1984-01-01T23:59:59.000Z

67

VACASULF operation at Citizens Gas and Coke Utility  

SciTech Connect (OSTI)

Citizens Gas and Coke Utility is a Public Charitable Trust which operates as the Department of Utilities of the City of Indianapolis, Indiana. Indianapolis Coke, the trade name for the Manufacturing Division of the Utility, operates a by-products coke plant in Indianapolis, Indiana. The facility produces both foundry and blast furnace coke. Surplus Coke Oven gas, generated by the process, is mixed with Natural Gas for sale to industrial and residential customers. In anticipation of regulatory developments, beginning in 1990, Indianapolis Coke undertook the task to develop an alternate Coke Oven Gas desulfurization technology for its facility. The new system was intended to perform primary desulfurization of the gas, dramatically extending the oxide bed life, thus reducing disposal liabilities. Citizens Gas chose the VACASULF technology for its primary desulfurization system. VACASULF requires a single purchased material, Potassium Hydroxide (KOH). The KOH reacts with Carbon Dioxide in the coke Oven Gas to form Potassium Carbonate (potash) which in turn absorbs the Hydrogen Sulfide. The rich solution releases the absorbed sulfide under strong vacuum in the desorber column. Operating costs are reduced through utilization of an inherent heat source which is transferred indirectly via attendant reboilers. The Hydrogen Sulfide is transported by the vacuum pumps to the Claus Kiln and Reactor for combustion, reaction, and elemental Sulfur recovery. Regenerated potash solution is returned to the Scrubber.

Currey, J.H. [Citizens Gas and Coke Utility, Indianapolis, IN (United States)

1995-12-01T23:59:59.000Z

68

Oil recovery from condensed corn distillers solubles.  

E-Print Network [OSTI]

??Condensed corn distillers solubles (CCDS) contains more oil than dried distillers grains with solubles (DDGS), 20 vs. 12% (dry weight basis). Therefore, significant amount of… (more)

Majoni, Sandra

2009-01-01T23:59:59.000Z

69

Design, start up, and three years operating experience of an ammonia scrubbing, distillation, and destruction plant  

SciTech Connect (OSTI)

When the rebuilt Coke Plant started operations in November of 1992, it featured a completely new closed circuit secondary cooler, ammonia scrubbing, ammonia distillation, and ammonia destruction plants. This is the second plant of this type to be built in North America. To remove the ammonia from the gas, it is scrubbed with three liquids: Approximately 185 gallons/minute of cooled stripped liquor from the ammonia stills; Light oil plant condensate; and Optionally, excess flushing liquor. These scrubbers typically reduce ammonia content in the gas from 270 Grains/100 standard cubic feet to 0.2 Grains/100 standard cubic feet.

Gambert, G.

1996-12-31T23:59:59.000Z

70

Coke formation during pyrolysis of 1,2-dichloroethane  

SciTech Connect (OSTI)

Most processes involving hydrocarbons or carbon oxides at high temperatures suffer from the disadvantage of coke formation. The formation of coke deposits during pyrolysis of hydrocarbons or chlorinated hydrocarbons is of significant practical importance. Examples of such processes are the steam cracking of alkanes to produce olefins and the thermal decomposition of 1,2-dichloroethane (EDC) for the production of vinyl chloride monomer (VCM). Even id the rate of coke production is low, the cumulative nature of the solid product will result in reactor fouling. The present work deals with the thermal decomposition of EDC. Coke formation has been studied on metal surfaces in a quartz tubular reactor. The rate of coke deposition was measures on metal foils hanging from one arm of a microbalance. A complete analysis of the product gas was accomplished using on-line gas chromatography. The results show that coke deposition during thermal decomposition of EDC depends on the composition of the feed as well as on the nature of the surface of the metal foil. Small amounts of other components (contamination with other chlorinated hydrocarbons as an example) may have a large influence on the rate of coke formation. The results are discussed in terms of surface composition/morphology of the metal foil and the free radical mechanism for thermal decomposition of FDC.

Holmen, A. [Norwegian Institute of Technology, Trondheim (Norway); Lindvag, O.A. [SINTEF Applied Chemistry, Trondheim (Norway)

1995-12-31T23:59:59.000Z

71

Optimal Control of Distillation Systems  

E-Print Network [OSTI]

The optimum performance of a distillation system can be evaluated by examining the product purities, the product recoveries, and the system's capability to respond to small or large, expected or unexpected, plant disturbances. An optimal control...

Chatterjee, N.; Suchdeo, S. R.

1984-01-01T23:59:59.000Z

72

Method for removal of furfural coke from metal surfaces  

SciTech Connect (OSTI)

This patent describes a process for preparing furfural coke for removal from metallic surfaces. It comprises: heating ship furfural coke without causing an evolution of heat capable of undesirably altering metallurgical properties of the surfaces in the presence of a gas with a total pressure of less than 100 psig containing molecular oxygen. The gas being at a sufficient temperature below 800{degrees}F. (427{degrees}C.) for a sufficient time to change the crush strength of the coke so as to permit removal with a water jet at a pressure of about 5000 psi.

Turner, J.D.

1990-02-27T23:59:59.000Z

73

RESIDUA UPGRADING EFFICIENCY IMPROVEMENT MODELS: WRI COKING INDEXES  

SciTech Connect (OSTI)

Pyrolysis experiments were conducted with three residua at 400 C (752 F) at various residence times. The wt % coke and gaseous products were measured for the product oils. The Western Research Institute (WRI) Coking Indexes were determined for the product oils. Measurements were made using techniques that might correlate with the Coking Indexes. These included spin-echo proton nuclear magnetic resonance spectroscopy, heat capacity measurements at 280 C (536 F), and ultrasonic attenuation. The two immiscible liquid phases that form once coke formation begins were isolated and characterized for a Boscan residuum pyrolyzed at 400 C (752 F) for 55 minutes. These materials were analyzed for elemental composition (CHNS), porphyrins, and metals (Ni,V) content.

John F. Schabron; Joseph F. Rovani, Jr.; Francis P. Miknis; Thomas F. Turner

2003-06-01T23:59:59.000Z

74

New process to avoid emissions: Constant pressure in coke ovens  

SciTech Connect (OSTI)

A chamber pressure regulation (PROven), especially effective in regard to emission control problems of coke ovens is introduced for the first time. Because of the partial vacuum in the collecting main system, it is possible to keep the oven`s raw gas pressure constant on a low level over the full coking time. The individual pressure control for each chamber is assured directly as a function of the oven pressure by an immersion system controlling the flow resistance of the collecting main valve. The latter is a fixed-position design (system name ``FixCup``). By doing away with the interdependence of collecting main pressure and chamber pressure, a parameter seen as a coking constant could not be made variable. This opens a new way to reduce coke oven emissions and simultaneously to prevent the ovens from damage caused by air ingress into the oven.

Giertz, J.; Huhn, F. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany). Inst. for Cokemaking and Fuel Technology; Hofherr, K. [Thyssen Stahl AG, Duisburg (Germany)

1995-12-01T23:59:59.000Z

75

Priorities in the design of chemical shops at coke plants  

SciTech Connect (OSTI)

Recent trends in the design of chemical equipment at coke plants are described, through the lens of experience at Giprokoks. The main priorities were to improve the removal of impurities from coke oven gas; to improve equipment design on the basis of new materials; to reduce reagent consumption; to reduce the materials and energy consumed in the construction of new equipment; and to minimize impacts on the environment and worker health. Some technological equipment is briefly characterized.

V.I. Rudyka; Y.E. Zingerman; V.V. Grabko; L.A. Kazak [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

76

Distilling entanglement from arbitrary resources  

E-Print Network [OSTI]

We obtain the general formula for the optimal rate at which singlets can be distilled from any given noisy and arbitrarily correlated entanglement resource, by means of local operations and classical communication (LOCC). Our formula, obtained by employing the quantum information spectrum method, reduces to that derived by Devetak and Winter, in the special case of an i.i.d. resource. The proofs rely on a one-shot version of the so-called "hashing bound," which in turn provides bounds on the one-shot distillable entanglement under general LOCC.

Francesco Buscemi; Nilanjana Datta

2010-10-15T23:59:59.000Z

77

Prediction of metallurgical coke strength from the petrographic composition of coal blends  

SciTech Connect (OSTI)

Turkey, especially Zonguldak on the West Coast of Black Sea region, has large reserves of bituminous coal that can be used either directly or in blends with other coals for metallurgical coke production. It is possible to predict the coking properties of these coals by petrographic analysis. In this study, semi- and non-coking coals were blended with coking bituminous coals in varying proportions and an estimation was made as to their stability factors through petrographic techniques. It was established that semi- and non-coking bituminous coals could be used in the production of metallurgical coke.

Sutcu, H.; Toroglu, I.; Piskin, S. [Zonguldak Karaelmas University, Zonguldak (Turkey)

2009-07-01T23:59:59.000Z

78

Corrosion inhibition for distillation apparatus  

DOE Patents [OSTI]

Tower material corrosion in an atmospheric or sub-atmospheric distillation tower in a coal liquefaction process is reduced or eliminated by subjecting chloride-containing tray contents to an appropriate ion-exchange resin to remove chloride from such tray contents materials.

Baumert, Kenneth L. (Emmaus, PA); Sagues, Alberto A. (Lexington, KY); Davis, Burtron H. (Georgetown, KY); Schweighardt, Frank K. (Upper Macungie, PA)

1985-01-01T23:59:59.000Z

79

Optimal distillation using thermodynamic geometry Bjarne Andresen  

E-Print Network [OSTI]

(temperature, pressure, etc.) define successive states in a sequence of equilibria. Fractional distillation [2Optimal distillation using thermodynamic geometry Bjarne Andresen Ørsted Laboratory, University of a distillation column may be improved by permitting heat exchange on every tray rather than only in the reboiler

Salamon, Peter

80

A coke oven model including thermal decomposition kinetics of tar  

SciTech Connect (OSTI)

A new one-dimensional coke oven model has been developed for simulating the amount and the characteristics of by-products such as tar and gas as well as coke. This model consists of both heat transfer and chemical kinetics including thermal decomposition of coal and tar. The chemical kinetics constants are obtained by estimation based on the results of experiments conducted to investigate the thermal decomposition of both coal and tar. The calculation results using the new model are in good agreement with experimental ones.

Munekane, Fuminori; Yamaguchi, Yukio [Mitsubishi Chemical Corp., Yokohama (Japan); Tanioka, Seiichi [Mitsubishi Chemical Corp., Sakaide (Japan)

1997-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

New packing in absorption systems for trapping benzene from coke-oven gas  

SciTech Connect (OSTI)

The efficiency of benzene removal from coke-oven gas in absorption units OAO Alchevskkoks with new packing is assessed.

V.V. Grabko; V.M. Li; T.A. Shevchenko; M.A. Solov'ev [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

82

Momentive Performance Materials Distillation Intercharger  

E-Print Network [OSTI]

Presenter: Nicki (Collins) Boucher Project Team: T. Baisley, C. Beers, R. Cameron, K. Holman, T. Kotkoskie, K. Norris Momentive Performance Materials Inc. Waterford, NY May 23, 2013 Industrial Energy Technology Conference ACC Responsible... Care? Energy Efficiency Program Momentive Performance Materials Distillation Interchanger ESL-IE-13-05-20 Proceedings of the Thrity-Fifth Industrial Energy Technology Conference New Orleans, LA. May 21-24, 2013 Copyright 2013 Momentive Performance...

Boucher, N.; Baisley, T.; Beers, C.; Cameron, R.; Holman, K.; Kotkoskie, T.; Norris, K.

2013-01-01T23:59:59.000Z

83

Process for converting coal into liquid fuel and metallurgical coke  

DOE Patents [OSTI]

A method of recovering coal liquids and producing metallurgical coke utilizes low ash, low sulfur coal as a parent for a coal char formed by pyrolysis with a volatile content of less than 8%. The char is briquetted and heated in an inert gas over a prescribed heat history to yield a high strength briquette with less than 2% volatile content.

Wolfe, Richard A. (Abingdon, VA); Im, Chang J. (Abingdon, VA); Wright, Robert E. (Bristol, TN)

1994-01-01T23:59:59.000Z

84

Coke profile and effect on methane/ethylene conversion process  

E-Print Network [OSTI]

The objective of this study was to investigate the coke profile with respect to time on stream and the change of product distribution due to catalyst deactivation. A fixed bed reactor was used to conduct this investigation. A series of runs were...

Al-Solami, Bandar

2002-01-01T23:59:59.000Z

85

Coke battery with 51-m{sup 3} furnace chambers and lateral supply of mixed gas  

SciTech Connect (OSTI)

The basic approaches employed in the construction of coke battery 11A at OAO Magnitogorskii Metallurgicheskii Kombinat are outlined. This battery includes 51.0-m{sup 3} furnaces and a dust-free coke-supply system designed by Giprokoks with lateral gas supply; it is heated exclusively by low-calorific mixed gas consisting of blast-furnace gas with added coke-oven gas. The 82 furnaces in the coke battery are divided into two blocks of 41. The gross coke output of the battery (6% moisture content) is 1140000 t/yr.

V.I. Rudyka; N.Y. Chebotarev; O.N. Surenskii; V.V. Derevich [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

86

An overview of crisis management in the coke industry  

SciTech Connect (OSTI)

Members of the American Coke and Coal Chemicals Institute (ACCCI), as responsible corporate citizens, have embraced the concepts of crisis management and progress down the various paths of planning and preparation, monitoring, media communications, community outreach, emergency response, and recovery. Many of the concepts outlined here reflect elements of crisis management guidelines developed by the Chemical Manufacturers Association (CMA). At a coke plant, crises can take the form of fires, chemical releases, labor strikes, feedstock supply disruptions, and excessive snowfall, just to name a few. The CMA defines a crisis as: ``an unplanned event that has the potential to significantly impact a company`s operability or credibility, or to pose a significant environment, economic or legal liability``; and crisis management as: ``those activities undertaken to anticipate or prevent, prepare for, respond to and recover from any incident that has the potential to greatly affect the way a company conducts its business.

Saunders, D.A.

1995-12-01T23:59:59.000Z

87

Integrated coke, asphalt and jet fuel production process and apparatus  

DOE Patents [OSTI]

A process and apparatus for the production of coke, asphalt and jet fuel m a feed of fossil fuels containing volatile carbon compounds therein is disclosed. The process includes the steps of pyrolyzing the feed in an entrained bed pyrolyzing means, separating the volatile pyrolysis products from the solid pyrolysis products removing at least one coke from the solid pyrolysis products, fractionating the volatile pyrolysis products to produce an overhead stream and a bottom stream which is useful as asphalt for road pavement, condensing the overhead stream to produce a condensed liquid fraction and a noncondensable, gaseous fraction, and removing water from the condensed liquid fraction to produce a jet fuel-containing product. The disclosed apparatus is useful for practicing the foregoing process. the process provides a useful method of mass producing and jet fuels from materials such as coal, oil shale and tar sands.

Shang, Jer Y. (McLean, VA)

1991-01-01T23:59:59.000Z

88

New environmental concepts in the chemical and coke industries  

SciTech Connect (OSTI)

We know that environmentally pure technologies do not exist. Coke production is no exception to the rule. The article considers the logic of environmental decision making. Attention focuses on a new bank of ecologically appropriate materials whose release to the biosphere must be considered solely in quantititative terms. Qualitativily all these materials are familiar; they are assimilated by populations of microorganisms and tar thus compatible with the biosphere.

A.Yu. Naletov; V.A. Naletov [Mendeleev Russian Chemical-Engineering University (Russian Federation)

2007-05-15T23:59:59.000Z

89

Development of advanced technology of coke oven gas drainage treatment  

SciTech Connect (OSTI)

In April 1994, commercial-scale application of ozone oxidation to ammonia liquor (which is primarily the water condensing from coke oven gas) to reduce its chemical oxygen demand (COD) was started at the Nagoya Works of Nippon Steel Corporation. This paper deals with the results of technical studies on the optimization of process operating conditions and the enlargement of equipment size and the operating purification system.

Higashi, Tadayuki; Yamaguchi, Akikazu; Ikai, Kyozou; Kamiyama, Hisarou; Muto, Hiroshi

1996-12-31T23:59:59.000Z

90

Rank three bipartite entangled states are distillable  

E-Print Network [OSTI]

We prove that the bipartite entangled state of rank three is distillable. So there is no rank three bipartite bound entangled state. By using this fact, We present some families of rank four states that are distillable. We also analyze the relation between the low rank state and the Werner state.

Lin Chen; Yi-Xin Chen

2008-03-07T23:59:59.000Z

91

Locally Accessible Information and Distillation of Entanglement  

E-Print Network [OSTI]

A new type of complementary relation is found between locally accessible information and final average entanglement for given ensemble. It is also shown that in some well known distillation protocol, this complementary relation is optimally satisfied. We discuss the interesting trade-off between locally accessible information and distillable entanglement for some states.

Sibasish Ghosh; Pramod Joag; Guruprasad Kar; Samir Kunkri; Anirban Roy

2004-03-18T23:59:59.000Z

92

Forpeerreview Synthesis of Complex Thermally Coupled Distillation  

E-Print Network [OSTI]

US energy consumption, which is equivalent to 2.87x10 18 J (2.87 million TJ) per year, or to a power; Divided Wall Column; Superstructure optimization; GDP. Introduction Distillation is one of the most limitations. Distillation columns use very large amounts of energy because the evaporation steps involved

Grossmann, Ignacio E.

93

Distillability of entanglement in accelerated frames  

E-Print Network [OSTI]

We study the entanglement distillability of bipartite mixed states of two modes of a free Dirac field as seen by two relatively accelerated parties. It is shown that there are states that will change from distillable into separable for a certain value of acceleration. We exemplify these criteria in the context of Werner states.

Shahpoor Moradi

2012-01-02T23:59:59.000Z

94

How to implement a quality program in a coking plant. The AHMSA experience  

SciTech Connect (OSTI)

AHMSA (Altos Hornos de Mexico) is the largest integrated Steel Plant in Mexico, with its 3.1 MMMT of Liquid Steel production program for 1995. AHMSA operates two coke plants which began operations in 1955 and 1976. Total coke monthly production capacity amounts to as much as 106,000 Metric Tons (MT). The coke plants working philosophy was discussed and established in 1986 as part of the Quality Improvement Program, where its ultimate goal is to give the best possible coke quality to its main client--the blast furnaces. With this goal in mind, a planned joint effort with their own coal mines was initiated. This paper deals with the implementation process of the Quality Program, and the results of this commitment at the coal mines, coke plants and blast furnaces. The coke quality improvement is shown since 1985 to 1994, as well as the impact on the blast furnace operation.

Reyes M, M.A.; Perez, J.L.; Garza, C. de la; Morales, M.

1995-12-01T23:59:59.000Z

95

Low-coke rate operation under high PCI at Kobe No. 3 BF  

SciTech Connect (OSTI)

Kobe No. 3 blast furnace (BF) suffered tremendous damage when the Great Hanshin-Awaji Earthquake rocked the area on January 17, 1995. However, working as quickly as possible to dig out of the burden and rehabilitate various facilities, the company managed to restart the No. 3 BF on April 2. After the restart, which went smoothly, production was shifted into the low coke rate operation which was being promoted before the disaster. In October, 1995, only seven months after the restart, the nation record of 296 kg/t low coke rate could be achieved. Subsequently, in January, 1996, coke rate reached 290 kg/t and the low coke rate operation was renewed. Since that time the same level of coke rate has been maintained. The paper discusses how low coke rate operation was achieved.

Matsuo, Tadasu; Kanazuka, Yasuo; Hoshino, Koichi; Yoshida, Yasuo; Kitayama, Syuji; Ishiwaki, Shiro [Kobe Steel Ltd. (Japan). Kobe Works

1997-12-31T23:59:59.000Z

96

New Design Methods and Algorithms for Multi-component Distillation...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

New Design Methods and Algorithms for Multi-component Distillation Processes New Design Methods and Algorithms for Multi-component Distillation Processes multicomponent.pdf More...

97

acrobat distiller job: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 September 1999 Distillation Theory. by Ivar J. Halvorsen and Sigurd, Norway 12;2 DistillationTheory.fm 2 September 1999 Table of Contents Introduction . . . . ....

98

The new Kaiserstuhl coking plant: The heating system -- Design, construction and initial operating experience  

SciTech Connect (OSTI)

At the end of 1992 the new coke plant Kaiserstuhl in Dortmund/Germany with presently the largest coke ovens world-wide started its production operation in close linkage to the Krupp-Hoesch Metallurgical Works after about 35 months construction time. This plant incorporating comprehensive equipment geared to improve environmental protection is also considered as the most modern coke plant of the world. The heating-system and first results of operation will be presented.

Strunk, J.

1996-12-31T23:59:59.000Z

99

Heating control methodology in coke oven battery at Rourkela Steel Plant  

SciTech Connect (OSTI)

A methodology of heating control was evolved incorporating temperature data generated through infra-red sensor at quenching station and thermocouples specially installed in the gooseneck of coke oven battery No. 3 of RSP. Average temperature of the red-hot coke as pushed helps in diagnosis of the abnormal ovens and in setting the targeted battery temperature. A concept of coke readiness factor (Q) was introduced which on optimization resulted in lowering the specific heat consumption by 30 KCal/Kg.

Bandyopadhyay, S.S.; Parthasarathy, L.; Gupta, A.; Bose, P.R.; Mishra, U.

1996-12-31T23:59:59.000Z

100

Operational improvements at Jewell Coal and Coke Company`s non-recovery ovens  

SciTech Connect (OSTI)

Operational improvements at Jewell Coal and Coke Company over the past five years includes safety and environmental concerns, product quality, equipment availability, manpower utilization, and productivity. These improvements with Jewell`s unique process has allowed Jewell Coal and Coke Company to be a consistent, high quality coke producer. The paper briefly explains Jewell`s unique ovens, their operating mode, improved process control, their maintenance management program, and their increase in productivity.

Ellis, C.E.; Pruitt, C.W.

1995-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

The effects of ash and maceral composition of Azdavay and Kurucasile (Turkey) coals on coking properties  

SciTech Connect (OSTI)

In this study, investigations were made as to the effect of the maceral compositions and mineral matter content of Azdavay and Kurucasile coals on the coking property. Chemical and maceral analyses and coking properties were determined for the products of the float-sink procedure. The coking properties were established on the basis of free swelling index and Ruhr dilatometer tests. Maceral analyses showed that as the ash content of a coal containing both high and medium volatile matter increases, its effective maceral proportion decreases, and the coking property is affected in an unfavorable way.

Toroglu, I. [Zonguldak Karaelmas University, Zonguldak (Turkey). Faculty of Engineering

2006-07-01T23:59:59.000Z

102

Integration of stripping of fines slurry in a coking and gasification process  

DOE Patents [OSTI]

In an integrated fluid coking and gasification process wherein a stream of fluidized solids is passed from a fluidized bed coking zone to a second fluidized bed and wherein entrained solid fines are recovered by a wet scrubbing process and wherein the resulting solids-liquid slurry is stripped to remove acidic gases, the stripped vapors of the stripping zone are sent to the gas cleanup stage of the gasification product gas. The improved stripping integration is particularly useful in the combination coal liquefaction process, fluid coking of bottoms of the coal liquefaction zone and gasification of the product coke.

DeGeorge, Charles W. (Chester, NJ)

1980-01-01T23:59:59.000Z

103

The effect of diabietic acid on the coking of oxidised solvent-extracted coal.  

E-Print Network [OSTI]

??Refcoal is a refined carbon source obtained by extraction of coal with dimethylformamide (DMF). During the coking process, Refcoal goes through a mesophase (fluid) stage… (more)

Ludere, Margaret Tshimangadzo

2008-01-01T23:59:59.000Z

104

Lignin as Both Fuel and Fusing Binder in Briquetted Anthracite Fines for Foundry Coke Substitute.  

E-Print Network [OSTI]

??Lignin that had been extracted from Kraft black liquor was investigated as a fusing binder in briquetted anthracite fines for a foundry coke substitute. Cupola… (more)

Lumadue, Matthew

2012-01-01T23:59:59.000Z

105

Distillation: Still towering over other options  

SciTech Connect (OSTI)

Distillation dominates separations in the chemical process industries (CPI), at least for mixtures that normally are processed as liquids. The authors fully expect that distillation will continue to be the method of choice for many separations, and the method against which other options must be compared. So, in this article, they will put into some perspective just why distillation continues to reign as the king of separations, and what steps are being taken to improve its applicability and performance, as well as basic understanding of the technique.

Kunesh, J.G. [Fractionation Research, Inc., Stillwater, OK (United States); Kister, H.Z. [Brown and Root, Inc., Alhambra (Canada); Lockett, M.J. [Praxair, Inc., Tonawanda, NY (United States); Fair, J.R. [Univ. of Texas, Austin, TX (United States)

1995-10-01T23:59:59.000Z

106

Development of energy efficient membrane distillation systems  

E-Print Network [OSTI]

Membrane distillation (MD) has shown potential as a means of desalination and water purification. As a thermally driven membrane technology which runs at relatively low pressure, which can withstand high salinity feed ...

Summers, Edward K

2013-01-01T23:59:59.000Z

107

Minimizing corrosion in coal liquid distillation  

DOE Patents [OSTI]

In an atmospheric distillation tower of a coal liquefaction process, tower materials corrosion is reduced or eliminated by introduction of boiling point differentiated streams to boiling point differentiated tower regions.

Baumert, Kenneth L. (Emmaus, PA); Sagues, Alberto A. (Lexington, KY); Davis, Burtron H. (Georgetown, KY)

1985-01-01T23:59:59.000Z

108

Absorptive Recycle of Distillation Waste Heat  

E-Print Network [OSTI]

condenser operates above ambient temperature, the rejected heat also contains unused availability. By incorporating an absorption heat pump (AHP) into the distillation process, these sources of unused availability can be tapped so as to recycle (and hence...

Erickson, D. C.; Lutz, E. J., Jr.

1982-01-01T23:59:59.000Z

109

An improved model for multiple effect distillation  

E-Print Network [OSTI]

Increasing global demand for fresh water is driving research and development of advanced desalination technologies. As a result, a detailed model of multiple effect distillation (MED) is developed that is flexible, simple ...

Mistry, Karan H.

110

Advancing Biorefining of Distillers Grain and Corn Stover Blends  

Broader source: Energy.gov (indexed) [DOE]

pretreatment process for distiller's grains and corn stover to convert residual starch, cellulose, and hemicellulose to ethanol and high- converting residual starch in order to...

111

Complex Fluid Analysis with the Advanced Distillation Curve Approach  

E-Print Network [OSTI]

of a complex fluid is a graph of boiling temperature versus volume fraction distilled, a procedure embodied for each distillate fraction (for both qualitative and quantitative analysis); (2) temperature measurements) an assessment of the energy content of each distillate fraction; (6) trace chemical analysis of each distillate

112

CHARACTERIZATION OF COAL- AND PETROLEUM-DERIVED BINDER PITCHES AND THE INTERACTION OF PITCH/COKE MIXTURES IN PRE-BAKED CARBON ANODES.  

E-Print Network [OSTI]

??Carbon anodes are manufactured from calcined petroleum coke (i.e. sponge coke) and recycled anode butts as fillers, and coal tar pitch (SCTP) as the binder.… (more)

Suriyapraphadilok, Uthaiporn

2008-01-01T23:59:59.000Z

113

Teamwork in planning and carrying out the first inspection of the coke dry quenching (CDQ) plant of the Kaiserstuhl Coking Facility  

SciTech Connect (OSTI)

The coke plant Kaiserstuhl operates a coke dry quenching (CDQ) plant with a downstream installed waste heat boiler to satisfy statutory pollution control rules and requirements. This CDQ which went on stream in March 1993 cools the whole coke production output from the Kaiserstuhl coke plant in counterflow to an inert cooling gas. This brief overview on the whole CDQ plant should elucidate the complex of problems posed when trying to make an exact plant revision plan. After all it was impossible to evaluate or to assess all the interior process technology relevant components during the planning stage as the plant was in operation. The revision data for the first interior check was determined and fixed by the statutory rule for steam boilers and pressure vessels. The relevant terms for this check are mandatorily prescribed. In liaison with the testing agency (RW TUEV) the date for the first revision was fixed for April 1995, that means two years after the first commissioning.

Burchardt, G.

1996-12-31T23:59:59.000Z

114

Influence of coal on coke properties and blast-furnace operation  

SciTech Connect (OSTI)

With unstable coal supplies and properties and a fluctuating content of coking coal in the batch at OAO Zapadno-Sibirskii Metallurgicheskii Kombinat (ZSMK) and of bituminous coal at Kuznetskaya enrichment facility, it is important to optimize the rank composition of the batch for coke production.

G.R. Gainieva; L.D. Nikitin [OAO Zapadno-Sibirskii Metallurgicheskii Kombinat (Russian Federation)

2007-07-01T23:59:59.000Z

115

Analytical input-output and supply chain study of China's coke and steel sectors  

E-Print Network [OSTI]

I design an input-output model to investigate the energy supply chain of coal-coke-steel in China. To study the demand, supply, and energy-intensity issues for coal and coke from a macroeconomic perspective, I apply the ...

Li, Yu, 1976-

2004-01-01T23:59:59.000Z

116

Ammonia removal process upgrade to the Acme Steel Coke Plant  

SciTech Connect (OSTI)

The need to upgrade the ammonia removal process at the Acme Steel Coke Plant developed with the installation of the benzene NESHAP (National Emission Standard for Hazardous Air Pollutants) equipment, specifically the replacement of the final cooler. At Acme Steel it was decided to replace the existing open cooling tower type final cooler with a closed loop direct spray tar/water final cooler. This new cooler has greatly reduced the emissions of benzene, ammonia, hydrogen sulfide and hydrogen cyanide to the atmosphere, bringing them into environmental compliance. At the time of its installation it was not fully recognized as to the effect this would have on the coke oven gas composition. In the late seventies the decision had been made at Acme Steel to stop the production of ammonia sulfate salt crystals. The direction chosen was to make a liquid ammonia sulfate solution. This product was used as a pickle liquor at first and then as a liquid fertilizer as more markets were developed. In the fall of 1986 the ammonia still was brought on line. The vapors generated from the operation of the stripping still are directed to the inlet of the ammonia absorber. At that point in time it was decided that an improvement to the cyclical ammonia removal process was needed. The improvements made were minimal yet allowed the circulation of solution through the ammonia absorber on a continuous basis. The paper describes the original batch process and the modifications made which allowed continuous removal.

Harris, J.L. [Acme Steel Co., Chicago, IL (United States). Chicago Coke Plant

1995-12-01T23:59:59.000Z

117

Modelling of a coke oven heating wall M. Landreau, D. Isler, Centre de Pyrolyse de Marienau (CPM)  

E-Print Network [OSTI]

- 1 - Modelling of a coke oven heating wall M. Landreau, D. Isler, Centre de Pyrolyse de Marienau with thermomechanical modelling of a coke oven heating wall. The objective is to define the safe limits of coke oven of walls, roof and larry car, pre-stresses (anchoring system), lateral pressure due to coal pushing A 3D

Boyer, Edmond

118

Hydrogen production from steam reforming of coke oven gas and its utility for indirect reduction of iron oxides in blast  

E-Print Network [OSTI]

of coal and coke are consumed for heating and reducing iron oxides [2,3]. As a result, BFs have becomeHydrogen production from steam reforming of coke oven gas and its utility for indirect reduction 2012 Available online 18 June 2012 Keywords: Steam reforming Hydrogen and syngas production Coke oven

Leu, Tzong-Shyng "Jeremy"

119

White Day  

E-Print Network [OSTI]

but also to their male co-workers. Men have White Day a month later on March 14th. Created by a sweets manufacturer in 1980 to boost sales, White Day is more of a marketing ploy than a holiday. On White Day, you will see men scurrying about purchasing giri...

Hacker, Randi

2010-05-05T23:59:59.000Z

120

Hydroprocessing Bio-oil and Products Separation for Coke Production  

SciTech Connect (OSTI)

Fast pyrolysis of biomass can be used to produce a raw bio-oil product, which can be upgraded by catalytic hydroprocessing to hydrocarbon liquid products. In this study the upgraded products were distilled to recover light naphtha and oils and to produce a distillation resid with useful properties for coker processing and production of renewable, low-sulfur electrode carbon. For this hydroprocessing work, phase separation of the bio-oil was applied as a preparatory step to concentrate the heavier, more phenolic components thus generating a more amenable feedstock for resid production. Low residual oxygen content products were produced by continuous-flow, catalytic hydroprocessing of the phase separated bio-oil.

Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.

2013-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Gas treatment and by-products recovery of Thailand`s first coke plant  

SciTech Connect (OSTI)

Coke is needed in the blast furnace as the main fuel and chemical reactant and the main product of a coke plant. The second main product of the coke plant is coke oven gas. During treatment of the coke oven gas some coal chemicals like tar, ammonia, sulphur and benzole can be recovered as by-products. Since the market prices for these by-products are rather low and often erratic it does not in most cases justify the investment to recover these products. This is the reason why modern gas treatment plants only remove those impurities from the crude gas which must be removed for technical and environmental reasons. The cleaned gas, however, is a very valuable product as it replaces natural gas in steel work furnaces and can be used by other consumers. The surplus can be combusted in the boiler of a power plant. A good example for an optimal plant layout is the new coke oven facility of Thai Special Steel Industry (TSSI) in Rayong. The paper describes the TSSI`s coke oven gas treatment plant.

Diemer, P.E.; Seyfferth, W. [Krupp Uhde GmbH, Dortmund (Germany)

1997-12-31T23:59:59.000Z

122

Investigation of the effects of heating rate on coking of shale during retorting  

SciTech Connect (OSTI)

The retorting of oil shale distributes organic carbon among three possible products: the liquid product, the noncondensible product, and the residual carbon (coke). The production of coke is detrimental because of the economic effects caused by the loss of organic carbon to this relatively intractable carbon form. Two reference oil shales, a Mahogany zone, Parachute Creek Member, Green River Formation oil shale from Colorado and a Clegg Creek Member, New Albany oil shale from Kentucky, were studied to evaluate the conditions that affect coke production during retorting. The variable that was studied in these experiments was the heating rate during retorting because heating rate has been indicated to have a direct effect on coke production (Burnham and Clarkson 1980). The six heating rates investigated covered the range from 1 to 650/degree/C/h (1.8 to 1169/degree/F/h). The data collected during these experiments were evaluated statistically in order to identify trends. The data for the eastern reference oil shale indicated a decrease in coke formation with increases in the heating rate. The liquid and noncondensible product yields both increased with increasing heating rate. The distribution of products in relation to retort heating rate follows the model suggested by Burnham and Clarkson (1980). Coke production during the retorting of western reference oil shale was found to be constant in relation to heating rate. The liquid product yield increased with increasing heating rate but the trend could not be verified at the 95% confidence level. The coke production observed in these experiments does not follow the prediction of the model. This may indicate that coke formation occurs early in the retorting process and may be limited by the availability of organic materials that form coke. 6 refs., 10 tabs.

Guffey, F.D.; Hunter, D.E.

1988-02-01T23:59:59.000Z

123

Demineralization of petroleum cokes and fly ash samples obtained from the upgrading of Athabasca oil sands bitumen  

SciTech Connect (OSTI)

Ash reduction of the cokes and fly ash samples derived from the Athabasca oil sands bitumen was attempted by dissolving the mineral matter in acids. The samples used for this investigation included Syncrude fluid coking coke, Suncor delayed coking coke and the two fly ash samples obtained from the combustion of these cokes. All samples were analyzed for C,H,N,O, and S before and after acid demineralization and the analyses results compared. Further, the ash from the samples before and after acid demineralization was analyzed for silica, alumina, iron titanium, nickel and vanadium to assess the acid leaching of these elements. CP/MAS, /sup 13/C NMR spectroscopic study of the demineralized coke and fly ash samples was also attempted.

Majid, A.; Ratcliffe, C.I.; Ripmeester, J.A. (National Research Council of Canada, Ottawa, ON (Canada). Div. of Chemistry)

1989-01-01T23:59:59.000Z

124

Glass-coating and cleaning system to prevent carbon deposition on coke oven walls  

SciTech Connect (OSTI)

The new technology for protecting the coking chamber bricks from damage by hard-pushing is described. The technology consists of the glass coating on the wall bricks and a wall cleaner to blow deposited carbon. For the glass coating, a specially developed glaze is sprayed onto the wall bricks by a spraying device developed to completely spray one coking chamber in a few minutes. The wall cleaner is installed on a pusher ram in the facility to automatically blow air at a sonic speed during coke pushing. The life of the glazed layer is estimated to be over two years.

Takahira, Takuya; Ando, Takeshi; Kasaoka, Shizuki; Yamauchi, Yutaka [Kawasaki Steel Corp., Mizushima, Kurashiki (Japan). Mizushima Works

1997-12-31T23:59:59.000Z

125

Desalination Using Vapor-Compression Distillation  

E-Print Network [OSTI]

and MSF, this research investigates a high-efficiency mechanical vapor-compression distillation system that employs an improved water flow arrangement. The incoming salt concentration was 0.15% salt for brackish water and 3.5% salt for seawater, whereas...

Lubis, Mirna R.

2010-07-14T23:59:59.000Z

126

Complex Distillation Arrangements : Extending the Petlyuk Ideas  

E-Print Network [OSTI]

to distillation columns ac- count for roughly 3 of the total energy consumption in the U.S. (Ognisty 1995 to reduce energy consumption at least two alternative approaches have been proposed both in the literature is also known as the Petlyuk column, due to a theoretical study of Pet- lyuk et al. (1965), or as a fully

Skogestad, Sigurd

127

Minimum Energy Diagrams for Multieffect Distillation Arrangements  

E-Print Network [OSTI]

and the energy use from this process accounts for an estimated 3% of the world energy consumption.1 With rising on the overall plant energy consumption. The use of heat integration combined with complex config- urations distillation ar- rangements. An easy form of comparison for energy consumption is the minimum vapor flow rate

Skogestad, Sigurd

128

Naphthenic acid corrosion in crude distillation units  

SciTech Connect (OSTI)

This paper summarizes corrosion experience in crude distillation units processing highly naphthenic California crude oils. Correlations have been developed relating corrosion rates to temperature and total acid number. There is a threshold acid number in the range of 1.5 to 2 mg KOH/g below which corrosion is minimal. High concentrations of hydrogen sulfide may raise this threshold value.

Piehl, R.L.

1988-01-01T23:59:59.000Z

129

Distillation: Present Status and Future Directions  

E-Print Network [OSTI]

-pressure steam as a heat source. The steam has, very likely, been sent through one or more users (turbi ne dri ves) before reaching the distillation reboiler. It seems almost characteristic of large chemical and refining complexes that there is a chronic...

Fair, J. R.; Humphrey, J. L.

1984-01-01T23:59:59.000Z

130

Construction and operation of a flash distillation apparatus  

E-Print Network [OSTI]

, Calibration Data of Orifioe ~, i, . ~ ~ ~ . ~ ~ . ~ 13 III. Equilibrium Data of Ethanol-Eater Mixtures . ~ * ~ ~ , 17 IV, . Flash Vaporieation Data of Ethanol Hater hIlxtures& + , 18 VI ~ Hempel Distillation of Oklahoma City Crude ~ . . . Flash... Vaporiration of Oklahoma City Crude ~ . ~ 21 22 VII' Hempel Distillations of Flash Distillates of Oklahoma City Crude . ~ ~ ~ ~ ~ ~ ~ i ~ ~ ~ ~ ~ ~ ~ ~ 24 VIII+ Hompel Distillations of Flash Residuums of Oklahoma City Crude ~ ~ ~ ~ ~ i ~ ~ o...

Knezevich, Milan

2012-06-07T23:59:59.000Z

131

Producing and controlling of the pollutant in the coal`s coking process  

SciTech Connect (OSTI)

In the process of heating and coke shaping, different pollutants and polluting factors will be produced and lost to the environment due to the different coking methods. The paper analyzes the production mechanism, type, emission, average quantity, and damage to the environment of the major pollutants and polluting factors produced in several kinds of coking processes in China at the present. Then, the paper concludes that an assessment for any coking method should include a comprehensive beneficial assessment of economical benefit, environmental benefit and social benefit. The items in the evaluation should consist of infrastructure investment, which includes production equipment and pollution control equipment, production cost, benefit and profit produced by one ton coal, whether the pollution complies with the environmental requirement, extent of the damage, influence to the social development, and etc.

Li, S. [Shanxi Environmental Protection Bureau (China); Fan, Z. [Shanxi Central Environmental Monitoring Station (China)

1997-12-31T23:59:59.000Z

132

Current developments at Giprokoks for coke-battery construction and reconstruction  

SciTech Connect (OSTI)

Approaches developed at Giprokoks for coke-battery construction and reconstruction are considered. Recommendations regarding furnace construction and reconstruction are made on the basis of Ukrainian and world experience.

V.I. Rudyka; Y.E. Zingerman; V.B. Kamenyuka; O.N. Surenskii; G.E. Kos'kova; V.V. Derevich; V.A. Gushchin [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15T23:59:59.000Z

133

Integrated C3 Feedstock and Aggregated Distillation Model for  

E-Print Network [OSTI]

Polypropylene Propane return Reactor effluent Distillation Polymerization FeedTank Propylene (91%) Goal: Select rates Constraints on composition of Propane Return, Distillation Overhead & Reactor Feed Limits Distillation Model Relates overhead composition of propane with flowrate of propane feed to the splitter

Grossmann, Ignacio E.

134

Asymptotic adaptive bipartite entanglement distillation protocol Erik Hostens,  

E-Print Network [OSTI]

to infinity. We call such protocols asymp- totic and the fraction of distilled Bell states per initial copy#12;#12;Asymptotic adaptive bipartite entanglement distillation protocol Erik Hostens, Jeroen: July 13, 2006) We present a new asymptotic bipartite entanglement distillation protocol

135

DYNAMICS AND CONTROL OF DISTILLATION COLUMNS -A CRITICAL SURVEY  

E-Print Network [OSTI]

: 47-7-594080 Figure 1: Typical simple distillation column. zF, yD and xB are mole fractions. tureDYNAMICS AND CONTROL OF DISTILLATION COLUMNS - A CRITICAL SURVEY Sigurd Skogestad Chemical cation and Control, 18, 177-217, 1997. Abstract Distillation column dynamics and control has been viewed

Skogestad, Sigurd

136

Effect of Number of Fractionating Trays on Reactive Distillation Performance  

E-Print Network [OSTI]

Effect of Number of Fractionating Trays on Reactive Distillation Performance Muhammad A. Al and rectifying sec- tions of a reacti®e distillation column can degrade performance. This effect, if true®e distillation columns cannot use conser®ati®e estimates of tray numbers, that is, we cannot simply add excess

Al-Arfaj, Muhammad A.

137

DYNAMICS AND CONTROL OF DISTILLATION COLUMNS A CRITICAL SURVEY  

E-Print Network [OSTI]

distillation column. z F , yD and xB are mole fractions. ture review, but a few new ideas are also presentedDYNAMICS AND CONTROL OF DISTILLATION COLUMNS ­ A CRITICAL SURVEY Sigurd Skogestad \\Lambda Chemical, Identification and Control, 18, 177­217, 1997. Abstract Distillation column dynamics and control has been viewed

Skogestad, Sigurd

138

Model Predictive Control of a Kaibel Distillation Column  

E-Print Network [OSTI]

column with model predictive control (MPC). A Kaibel distillation column has several advantages comparedModel Predictive Control of a Kaibel Distillation Column Martin Kvernland Ivar Halvorsen Sigurd only a single column shell. The distillation process is a multivariable process which leads

Skogestad, Sigurd

139

RIS0-M-2319 RISK ANALYSIS OF A DISTILLATION UNIT  

E-Print Network [OSTI]

RIS0-M-2319 RISK ANALYSIS OF A DISTILLATION UNIT J. R. Taylor**, 0. Hansen*, C. Jensen*, 0. F. A risk analysis of a batch distillation unit is de- scribed. The analysis has been carried out at several.2. Objectives and organisation 5 1.2.2. Philosophy and approach 6 1.3.1. The distillation unit 8 1

140

CHEM333: Experiment 4: Steam Distillation of Essential Oils;  

E-Print Network [OSTI]

CHEM­333: Experiment 4: Steam Distillation of Essential Oils; Experiments A, C, D and below. Reading: For this experiment read Chapter 10. This week you will get to use steam distillation to isolate may wait until you come to lab to find out which spice you get. Steam distillation is not a common

Taber, Douglass

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

PLA Day  

E-Print Network [OSTI]

Broadcast Transcript: August 1st is coming up, people, and you know what that means. People's Liberation Army Day here in China:, time to party for the Party and celebrate the army's formation back in 1927. This year, ...

Hacker, Randi

2010-08-04T23:59:59.000Z

142

The Videofil probe, a novel instrument to extend the coke oven service life  

SciTech Connect (OSTI)

To prolong the service life of coke oven batteries, the Centre de Pyrolyse de Marienau developed the Videofil probe, a novel instrument to conduct diagnoses and to help repair operations of coke ovens. The Videofil probe is a flexible non-water-cooled endoscope which is used to locate flue wall damage and estimate its importance, to define the oven zones to repair and guide the repair work and to control the quality of the repair work and its durability.

Gaillet, J.P.; Isler, D. [Centre de Pyrolyse de Marienau, Forbach (France)

1997-12-31T23:59:59.000Z

143

Cryogenic fractionator gas as stripping gas of fines slurry in a coking and gasification process  

DOE Patents [OSTI]

In an integrated coking and gasification process wherein a stream of fluidized solids is passed from a fluidized bed coking zone to a second fluidized bed and wherein entrained solid fines are recovered by a scrubbing process and wherein the resulting solids-liquid slurry is stripped with a stripping gas to remove acidic gases, at least a portion of the stripping gas comprises a gas comprising hydrogen, nitrogen and methane separated from the coker products.

DeGeorge, Charles W. (Chester, NJ)

1981-01-01T23:59:59.000Z

144

Effect of thermal treatment on coke reactivity and catalytic iron mineralogy  

SciTech Connect (OSTI)

Iron minerals in coke can catalyze its gasification and may affect coke behavior in the blast furnace. The catalytic behavior of iron depends largely upon the nature of the iron-bearing minerals. To determine the mineralogical changes that iron could undergo in the blast furnace, cokes made from three coals containing iron present in different mineral forms (clays, carbonates, and pyrite) were examined. All coke samples were heat-treated in a horizontal furnace at 1373, 1573, and 1773 K and then gasified with CO{sub 2} at 1173 K in a fixed bed reactor (FBR). Coke mineralogy was characterized using quantitative X-ray diffraction (XRD) analysis of coke mineral matter prepared by low-temperature ashing (LTA) and field emission scanning electron microscopy combined with energy dispersive X-ray analysis (FESEM/EDS). The mineralogy of the three cokes was most notably distinguished by differing proportions of iron-bearing phases. During heat treatment and subsequent gasification, iron-containing minerals transformed to a range of minerals but predominantly iron-silicides and iron oxides, the relative amounts of which varied with heat treatment temperature and gasification conditions. The relationship between initial apparent reaction rate and the amount of catalytic iron minerals - pyrrhotite, metallic iron, and iron oxides - was linear and independent of heat treatment temperature at total catalyst levels below 1 wt %. The study showed that the coke reactivity decreased with increasing temperature of heat treatment due to decreased levels of catalytic iron minerals (largely due to formation of iron silicides) as well as increased ordering of the carbon structure. The study also showed that the importance of catalytic mineral matter in determining reactivity declines as gasification proceeds. 37 refs., 13 figs., 7 tabs.

Byong-chul Kim; Sushil Gupta; David French; Richard Sakurovs; Veena Sahajwalla [University of New South Wales, Sydney, NSW (Australia). Centre for Sustainable Materials Research and Technology

2009-07-15T23:59:59.000Z

145

Coke gasification: the influence and behavior of inherent catalytic mineral matter  

SciTech Connect (OSTI)

Gasification of coke contributes to its degradation in the blast furnace. In this study, the effect of gasification on the inherent catalytic minerals in cokes and their reciprocal influence on gasification are investigated. The catalytic mineral phases identified in the cokes used in this study were metallic iron, iron sulfides, and iron oxides. Metallic iron and pyrrhotite were rapidly oxidized during gasification to iron oxide. The catalysts had a strong influence on the apparent rates at the initial stages of reaction. As gasification proceeds, their effect on the reaction rate diminishes as a result of reducing the surface contact between catalyst and carbon matrix because of carbon consumption around the catalyst particles; with extended burnout the reactivity of the coke becomes increasingly dependent on surface area. The reaction rate in the initial stages was also influenced by the particle size of the catalytic minerals; for a given catalytic iron level, the cokes whose catalytic minerals were more finely dispersed had a higher apparent reaction rate than cokes containing larger catalytic particles. Iron, sodium, and potassium in the amorphous phase did not appear to affect the reaction rate. 40 refs., 16 figs., 6 tabs.

Mihaela Grigore; Richard Sakurovs; David French; Veena Sahajwalla [Commonwealth Scientific and Industrial Research Organisation (CSIRO), Bangor, NSW (Australia)

2009-04-15T23:59:59.000Z

146

Contact structure for use in catalytic distillation  

DOE Patents [OSTI]

A method is described for conducting catalytic chemical reactions and fractionation of the reaction mixture comprising feeding reactants into a distillation column reactor, contracting said reactant in liquid phase with a fixed bed catalyst in the form of a contact catalyst structure consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column. 7 figs.

Jones, E.M. Jr.

1984-03-27T23:59:59.000Z

147

Contact structure for use in catalytic distillation  

DOE Patents [OSTI]

A method and apparatus are disclosed for conducting catalytic chemical reactions and fractionation of the reaction mixture, comprising and feeding reactants into a distillation column reactor contracting said reactant in a liquid phase with a fixed bed catalyst in the form of a contact catalyst structure, consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column. 7 figs.

Jones, E.M. Jr.

1985-08-20T23:59:59.000Z

148

Contact structure for use in catalytic distillation  

DOE Patents [OSTI]

A method for conducting catalytic chemical reactions and fractionation of the reaction mixture comprising feeding reactants into a distillation column reactor contracting said reactant in liquid phase with a fixed bed catalyst in the form of a contact catalyst structure consisting of closed porous containers containing the catatlyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column.

Jones, Jr., Edward M. (Friendswood, TX)

1984-01-01T23:59:59.000Z

149

Contact structure for use in catalytic distillation  

DOE Patents [OSTI]

A method and apparatus for conducting catalytic chemical reactions and fractionation of the reaction mixture, comprising and feeding reactants into a distillation column reactor contracting said reactant in a liquid phase with a fixed bed catalyst in the form of a contact catalyst structure, consisting of closed porous containers containing the catalyst for the reaction and a clip means to hold and support said containers, which are disposed above, i.e., on the distillation trays in the tower. The trays have weir means to provide a liquid level on the trays to substantially cover the containers. In other words, the trays function in their ordinary manner with the addition thereto of the catalyst. The reaction mixture is concurrently fractionated in the column.

Jones, Jr., Edward M. (Friendswood, TX)

1985-01-01T23:59:59.000Z

150

Apparatus for distilling shale oil from oil shale  

SciTech Connect (OSTI)

An apparatus for distilling shale oil from oil shale comprises: a vertical type distilling furnace which is divided by two vertical partitions each provided with a plurality of vent apertures into an oil shale treating chamber and two gas chambers, said oil shale treating chamber being located between said two gas chambers in said vertical type distilling furnace, said vertical type distilling furnace being further divided by at least one horizontal partition into an oil shale distilling chamber in the lower part thereof and at least one oil shale preheating chamber in the upper part thereof, said oil shale distilling chamber and said oil shale preheating chamber communication with each other through a gap provided at an end of said horizontal partition, an oil shale supplied continuously from an oil shale supply port provided in said oil shale treating chamber at the top thereof into said oil shale treating chamber continuously moving from the oil shale preheating chamber to the oil shale distilling chamber, a high-temperature gas blown into an oil shale distilling chamber passing horizontally through said oil shale in said oil shale treating chamber, thereby said oil shale is preheated in said oil shale preheating chamber, and a gaseous shale oil is distilled from said preheated oil shale in said oil shale distilling chamber; and a separator for separating by liquefaction a gaseous shale oil from a gas containing the gaseous shale oil discharged from the oil shale preheating chamber.

Shishido, T.; Sato, Y.

1984-02-14T23:59:59.000Z

151

Effect of coal and coke qualities on blast furnace injection and productivity at Taranto  

SciTech Connect (OSTI)

Injection rates at Taranto blast furnaces Nos. 2 and 4, for more than 16 months, was maintained above 175 kg/thm. Monthly average injection rate for two months stabilized above 190 kg/thm. This performance was possible due to the very high combined availabilities of Taranto blast furnaces and the KST injection system. Based upon this experience the quantitative relationships between coke/coal and blast furnace operational parameters were studied and are shown graphically. During this period due to coke quality changes, injection rate had to be reduced. The effect of using coke breeze in coke/ferrous charge as well as coal blend was also evaluated. Permeability of the furnace was found to be directly affected by O{sub 2} enrichment level, while at a high PCI rate no correlation between actual change in coke quality and permeability could be established. The future of PCI technology lies in better understanding of relationships between material specifications and blast furnace parameters of which permeability is of prime importance.

Salvatore, E.; Calcagni, M. [ILVA, Taranto (Italy); Eichinger, F.; Rafi, M.

1995-12-01T23:59:59.000Z

152

Pi Day  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive SolarCenter |Photoinduced2Zoeand Physics ORNLPi Day

153

Energy conservation in distillation: a technology applications manual  

SciTech Connect (OSTI)

Distillation is the most widely practiced technique for separating mixtures of chemical species, but it is an energy intensive process. A 10% reduction in distillation energy consumption would effect a significant savings. On a national basis this would be an annual savings of 200 trillion Btu, or the equivalent of 36.5 million barrels of oil per year. Technology to achieve these savings in distillation energy is available and measures are presented to assist process engineers in technical and economic analysis of the energy conservation measures most suitable for particular distillation applications. The manual catalogs all of the energy conservation options applicable to distillation and the options by the investment required; describes in detail the options having a significant potential to reduce distillation energy requirements economically; provides guidelines that will allow the plant engineer to quickly screen each option for his application; and provides short-cut calculation procedures for use in a preliminary economic analysis of promising options.

Not Available

1980-05-01T23:59:59.000Z

154

Energy Conservation Options in Distillation Processes  

E-Print Network [OSTI]

~itroo.? ':!OD.e~tell.,..ot!.k1 .'k..,.-.ottNltlu'..,. II ""'I'JI ..... ~I_ """-.4008l1"OO I ~.z.,. 1 ,1'1 (-frl-.'....u_~ R.da at AC~Ofllftl\\,J'ftlit...." ? I 5 "'-tlnc&! Tt.,.. ? 21.' \\lip Gilil.In31 j TnyE.'tIc>Mcy .11.1'llo I ~~TI""'.'2.at... I There are many options available to the engi*eer seeking to reduce the energy requirements of a distil lation process. The technology for most of these I, options has been available for many years, but it has only recently become economically...

Harris, G. E.; Hearn, W. R.; Blythe, G. M.; Stuart, J. M.

1980-01-01T23:59:59.000Z

155

Use of computers for multicomponent distillation calculations  

E-Print Network [OSTI]

The corrected values for the b 's are best cal- i culated by multiplying (b. /d ) by (d. ) The compositions for each component in the vapor and liquid streams leaving plate j are calculated by use of the following equations. ('i/ i)ca ( i)co y. ji c Z (v... . . /b. ) (b. ) ji i ca i co i=1 , f a j x N+1 C (47-b) A temperature profile may be calculated by making either bubble or dew point calculations based on the compositions obtained by use of Equations (46) and (47). The specified distillate rate must...

Sullivan, Samuel Lane

1959-01-01T23:59:59.000Z

156

Advanced Distillation: Programs Proposed to DOE  

E-Print Network [OSTI]

to the foremost practitioner of the Advanced Distillation art, due to a 30 year continuity in Ule area as both a consultant and a university professor. His consulting assignments lu1ve been long-ternl

Woinsky, S. G.

157

Coking phenomena in the pyrolysis of ethylene dichloride into vinyl chloride  

SciTech Connect (OSTI)

Pyrolysis of ethylene dichloride (EDC) into vinyl chloride (VCM) which is the monomer for polyvinyl chloride, one of the most popular polymers, has been established commercially for quite a time. The process around 500{degrees}C has been proved to give VCM of high purity at very high selectivity about 99% and a reasonable conversion about 50%. However, the coking is a major problem in the long run, requiring decoking treatment every two months. The present paper describes features of carbons produced in the pyrolysis process. Coke of respective features was found in the reactor, the transfer line, the heat exchanger and the rapid quencher. Typical pyrolytic carbon, anisotropic coke produced in the liquid phase, isotropic carbon was produced on the reactor wall as low as 500{degrees}C. The mechanisms for their formation are discussed.

Sotowa, Chiaki; Korai, Yozo; Mochida, Isao [Kyushu Univ., Kasuga, Fukuoka (Japan)] [and others

1995-12-31T23:59:59.000Z

158

advanced distillation control: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Morari California.Eng., Norwegian Institute of Technology (NTH), N-7034 Trondheim, Norway Paper presented at Symposium Distillation Skogestad, Sigurd 14 CONTROL AND ENERGY...

159

azeotropic distillation columns: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Azeotropic Mixtures in Closed Batch Distillation Arrangements S. Skouras and S, Norway SCOPE OF THE PROJECT How can we separate ternary mixtures in closed batch...

160

Light oil yield improvement project at Granite City Division Coke/By-Product Plant  

SciTech Connect (OSTI)

Light oil removal from coke oven gas is a process that has long been proven and utilized throughout many North American Coke/By-Products Plants. The procedures, processes, and equipment requirements to maximize light oil recovery at the Granite City By-Products Plant will be discussed. The Light Oil Yield Improvement Project initially began in July, 1993 and was well into the final phase by February, 1994. Problem solving techniques, along with utilizing proven theoretical recovery standards were applied in this project. Process equipment improvements and implementation of Operator/Maintenance Standard Practices resulted in an average yield increase of 0.4 Gals./NTDC by the end of 1993.

Holloran, R.A. [National Steel Corp., Granite City, IL (United States). Granite City Div.

1995-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Energy Use in Distillation Operation: Nonlinear Economic Effects  

E-Print Network [OSTI]

important. For many distillation columns there is a tradeoff in operation between energy usage and product recovery and setting the proper usage target involves a calculation of the economic tradeoff between these two factors. However, distillation is a non-linear...

White, D. C.

2010-01-01T23:59:59.000Z

162

Coal flow aids reduce coke plant operating costs and improve production rates  

SciTech Connect (OSTI)

Chemical coal flow aids can provide many benefits to coke plants, including improved production rates, reduced maintenance and lower cleaning costs. This article discusses the mechanisms by which coal flow aids function and analyzes several successful case histories. 2 refs., 10 figs., 1 tab.

Bedard, R.A.; Bradacs, D.J.; Kluck, R.W.; Roe, D.C.; Ventresca, B.P.

2005-06-01T23:59:59.000Z

163

Simulation of diffusion and trapping in digitized heterogeneous media David A. Coke@ and Salvatore Torquatob)  

E-Print Network [OSTI]

Simulation of diffusion and trapping in digitized heterogeneous media David A. Coke@ and Salvatore of a Brownian particle diffusing among a, digitized lattice-based domain of traps. Following the first, the inverse of the trapping rate, is obtained for a variety of configurations involving digitized spheres

Torquato, Salvatore

164

Pyrolysis of shale oil vacuum distillate fractions  

SciTech Connect (OSTI)

The freezing point of US Navy jet fuel (JP-5) has been related to the amounts of large n-alkanes present in the fuel. This behavior applies to jet fuels derived from alternate fossil fuel resources, such as shale oil, coal, and tar sands, as well as those derived from petroleum. In general, jet fuels from shale oil have the highest and those from coal the lowest n-alkane content. The origin of these n-alkanes in the amounts observed, especially in shale-derived fuels, is not readily explained on the basis of literature information. Studies of the processes, particularly the ones involving thermal stress, used to produce these fuels are needed to define how the n-alkanes form from larger molecules. The information developed will significantly contribute to the selection of processes and refining techniques for future fuel production from shale oil. Carbon-13 nmr studies indicate that oil shale rock contains many long unbranched straight chain hydrocarbon groups. The shale oil derived from the rock also gives indication of considerable straight chain material with large peaks at 14, 23, 30, and 32 ppM in the C-13 nmr spectrum. Previous pyrolysis studies stressed fractions of shale crude oil residua, measured the yields of JP-5, and determined the content of potential n-alkanes in the JP-5 distillation range (4). In this work, a shale crude oil vacuum distillate (Paraho) was separated into three chemical fractions. The fractions were then subjected to nmr analysis to estimate the potential for n-alkane production and to pyrolysis studies to determine an experimental n-alkane yield.

Hazlett, R.N.; Beal, E.

1983-01-01T23:59:59.000Z

165

Pyrolysis of shale oil vacuum distillate fractions  

SciTech Connect (OSTI)

The freezing point of U.S. Navy jet fuel (JP-5) has been related to the amounts of large nalkanes present in the fuel. This behavior applies to jet fuels derived from alternate fossil fuel resources, such as shale oil, coal, and tar sands, as well as those derived from petroleum. In general, jet fuels from shale oil have the highest and those from coal the lowest n-alkane content. The origin of these n-alkanes in the amounts observed, especially in shale-derived fuels, is not readily explained on the basis of literature information. Studies of the processes, particularly the ones involving thermal stress, used to produce these fuels are needed to define how th n-alkanes form from larger molecules. The information developed will significantly contribute to the selection of processes and refining techniques for future fuel production from shale oil. Carbon-13 nmr studies indicate that oil shale rock contains many long unbranched straight chain hydrocarbon groups. The shale oil derived from the rock also gives indication of considerable straight chain material with large peaks at 14, 23, 30 and 32 ppm in the C-13 nmr spectrum. Previous pyrolysis studies stressed fractions of shale crude oil residua, measured the yields of JP-5, and determined the content of potential n-alkanes in the JP-5 distillation range (4). In this work, a shale crude oil vacuum distillate (Paraho) was separated into three chemical fractions. The fractions were then subjected to nmr analysis to estimate the potential for n-alkane production and to pyrolysis studies to determine an experimental n-alkane yield.

Hazlett, R.N.; Beal, E.

1983-02-01T23:59:59.000Z

166

The Cylinder: Kinematics of the Nineteenth Century  

E-Print Network [OSTI]

distillation. The coking of coal as well as the productionin coal mines, in steel and paper mills, in coking plants,

Müller-Sievers, Helmut

2012-01-01T23:59:59.000Z

167

U.S. Product Supplied of Distillate Fuel Oil (Thousand Barrels per Day)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--StateWinterYear Jan Feb MarRevision2009 20102009Product

168

Heat Integrated Distillation through Use of Microchannel Technology  

Broader source: Energy.gov [DOE]

This factsheet describes a research project whose goal is to develop a breakthrough distillation process using Microchannel Process Technology to integrate heat transfer and separation into a single unit operation.

169

CHEM333: Lab Experiment 3: Distillation and Gas Chromatography  

E-Print Network [OSTI]

. Distillation is used to isolate many of life's essentials such as gasoline from oil or brandy from wine much about the mathematics of Raoult's Law; you will see it again in physical chemistry. Pay particular

Taber, Douglass

170

Absorption Cycle Fundamentals and Applications Guidelines for Distillation Energy Savings  

E-Print Network [OSTI]

The absorption cycle offers one of the most economic and widely applicable technologies for waste heat upgrading. It can use off-the-shelf hardware that is available now, at any required capacity rating. Fractional distillations, as a class...

Erickson, D. C.; Davidson, W. F.

1984-01-01T23:59:59.000Z

171

Membrane augmented distillation to separate solvents from water  

DOE Patents [OSTI]

Processes for removing water from organic solvents, such as ethanol. The processes include distillation to form a rectified overhead vapor, compression of the rectified vapor, and treatment of the compressed vapor by two sequential membrane separation steps.

Huang, Yu; Baker, Richard W.; Daniels, Rami; Aldajani, Tiem; Ly, Jennifer H.; Alvarez, Franklin R.; Vane, Leland M.

2012-09-11T23:59:59.000Z

172

An experimental and mathematical investigation of hydrocarbon steam distillation  

E-Print Network [OSTI]

of Committee) Dr. Pau B. Crawford (Member) r. William D. McCain Jr. r. A ber t T. Watson (Member) Dr. i l. iam D. on Gonten ead of Department) December 1984 ABSTRACT An Experimental and Mathematical Investigation of Hydrocarbon Steam Distillation... mechanism associated with steam flooding and in-situ combustion enhanced oil recovery projects. It also takes place in hydrocarbon recovery from deep volatile oil reservoirs. Nethods for predicting the recovery of hydrocarbons by steam distillation have...

Langhoff, John Allan

1984-01-01T23:59:59.000Z

173

Determination of plate efficiencies for conventional distillation columns  

E-Print Network [OSTI]

DETERMINATION OF PLATE EFFICIENCIES FOR CONVENTIONAL DISTILLATION COIUMNS A Thesis By Thomas Raymond Harris Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE May 1962 Ma)or Sub)ect t Chemical Engineering DETERMINATION OF PLATE EFFICIENCIES FOR CONVENTIONAL DISTILLATION COLUMNS A Thesis Thomas Raymond Harris Approred as to style and content bye Chairman of ommittee Head...

Harris, Thomas Raymond

2012-06-07T23:59:59.000Z

174

Single-step distillation protocol with generalized beam splitters  

SciTech Connect (OSTI)

We develop a distillation protocol for multilevel qubits (qudits) using generalized beam splitters like in the proposal of Pan et al. for ordinary qubits. We find an acceleration with respect to the scheme of Bennet et al. when extended to qudits. It is also possible to distill entangled pairs of photons carrying orbital angular momenta states that conserve the total angular momenta as those produced in recent experiments.

Martin-Delgado, M. A.; Navascues, M. [Departamento de Fisica Teorica I, Universidad Complutense, 28040 Madrid, (Spain)

2003-07-01T23:59:59.000Z

175

Integrated Thermal and Hydraulic Analysis of Distillation Columns  

E-Print Network [OSTI]

significant additional insights to help screen the options for distillation column revamps. Column Targeting Aspen Plus Column Targeting tool offers capabilities for thermal and hydraulic analysis of distillation columns. During design or retrofit analysis...). Aspen Plus Column Targeting Tool generates the CGCCs based on the Practical Near-Minimum Thermodynamic Condition (PNMTC) approximation (Dhole and Linnhoff). The enthalpies used in plotting the CGCCs are calculated at a given stage of the column...

Samant, K.; Sinclair, I.; Keady, G.

176

Synthesis and design of optimal thermal membrane distillation networks  

E-Print Network [OSTI]

distillation as a technology that can be driven by thermal energy at low enthalpy, such as geothermal energy, by using a hybrid air gap membrane distillation- fluidized bed crystallization assembly for desalination. Tomaszewska (2000) has studied... of pre-pressurizing of the membrane pores and control of dissolved gas concentrations in the feed and recycled permeate in order to prevent pore penetration and wetting (Agashichev and Sivakov, 1993). Temperature polarization effects have been...

Nyapathi Seshu, Madhav

2006-10-30T23:59:59.000Z

177

Coke oven doors: Historical methods of emission control and evaluation of current designs  

SciTech Connect (OSTI)

The containment of oven door leakage has presented challenges to coke producers for many years as the requirements of environmental regulatory agencies have become increasingly stringent. A description and evaluation of past door modifications, leakage control methodologies and luting practices on Armco Steel Company, L.P.'s Ashland No. 4 Battery is detailed to provide a background for recent work, and to expand the industry's technology base. The strict door leakage standards of the 1990 amendments to the USA Clean Air Act has prompted additional technical studies. Both a joint Armco committee's evaluation of successful systems world wide and test door installations at Ashland were incorporated to determine compliance strategy. The eventual installation of Ikio Model II coke oven doors, along with modifications to ancillary equipment, has resulted in door leakage rates approaching zero. Associated methods, problems, results and evaluations are discussed.

Pettrey, J.O.; Greene, D.E. (Armco Steel Co., Middletown, OH (United States))

1993-01-01T23:59:59.000Z

178

A mathematical model for the estimation of flue temperature in a coke oven  

SciTech Connect (OSTI)

The coke plants at the Kwangyang works has adopted an Automatic Battery Control (ABC) system which consists of four main parts, battery heating control, underfiring heat and waste gas oxygen control, pushing and charging schedule and Autotherm-S that measures heating wall temperature during pushing. The measured heating wall temperature is used for calculating Mean Battery Temperature (MBT) which is average temperature of flues for a battery, but the Autotherm-S system can not provide the flue temperatures of an oven. This work attempted to develop mathematical models for the estimation of the flue temperature using the measured heating wall temperature and to examine fitness of the mathematical model for the coke plant operation by analysis of raw gas temperature at the stand pipe. Through this work it is possible to reflect heating wall temperature in calculating MBT for battery heating control without the interruption caused by a maintenance break.

Choi, K.I.; Kim, S.Y.; Suo, J.S.; Hur, N.S.; Kang, I.S.; Lee, W.J.

1997-12-31T23:59:59.000Z

179

Linings with optimum heat-emission surfaces for cars receiving and transporting incandescent coke  

SciTech Connect (OSTI)

The least reliable components of the cars which receive and transport incandescent coke are the lining plates. This applies to both the quenching cars used for wet quenching and the hot-coke cars used in the dry cooling process. Technical advances have been described whereby the life of car linings is prolonged by increasing heat emission from the lining plate surfaces. As the heat emission level is enhanced the mean plate temperature is lowered and the lining life thereby prolonged; moreover, the between-servicings period is prolonged. This involves providing fins on the non-working (outer) plate surfaces. The problem of optimizing the size and shape of the fins with reference to heat emission remains unsolved: the requirement is maximum heat emission from plates of a given weight, or conversely minimum plate weight for a given heat emission level. 6 refs., 3 figs.

Kotlyar, B.D.; Pleshkov, P.I.; Gadyatskii, V.G. [and others

1992-12-31T23:59:59.000Z

180

Key Distillation and the Secret-Bit Fraction  

E-Print Network [OSTI]

We consider distillation of secret bits from partially secret noisy correlations P_ABE, shared between two honest parties and an eavesdropper. The most studied distillation scenario consists of joint operations on a large number of copies of the distribution (P_ABE)^N, assisted with public communication. Here we consider distillation with only one copy of the distribution, and instead of rates, the 'quality' of the distilled secret bits is optimized, where the 'quality' is quantified by the secret-bit fraction of the result. The secret-bit fraction of a binary distribution is the proportion which constitutes a secret bit between Alice and Bob. With local operations and public communication the maximal extractable secret-bit fraction from a distribution P_ABE is found, and is denoted by Lambda[P_ABE]. This quantity is shown to be nonincreasing under local operations and public communication, and nondecreasing under eavesdropper's local operations: it is a secrecy monotone. It is shown that if Lambda[P_ABE]>1/2 then P_ABE is distillable, thus providing a sufficient condition for distillability. A simple expression for Lambda[P_ABE] is found when the eavesdropper is decoupled, and when the honest parties' information is binary and the local operations are reversible. Intriguingly, for general distributions the (optimal) operation requires local degradation of the data.

Nick S. Jones; Lluis Masanes

2008-05-12T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Process for removing naphthenic acids from petroleum distillates  

SciTech Connect (OSTI)

A liquid extraction process is described for removing naphthenic acids from naphthenic acid containing petroleum distillates boiling within the range of about 180/sup 0/-600/sup 0/C. and having an acid number of at least about 0.2 which process comprises the steps of: (a) intimately contacting the petroleum distillates with a solvent consisting essentially of methanol, water, and about from 2-20 wt. % ammonia and having a methanol: water ratio in the range of about from 0.2 to 3 parts by weight of methanol per part by weight of water and using an ammonia to petroleum distillate ratio of about 0.1-1 part by weight of ammonia per 100 parts by weight of the petroleum distillate. This selectively extracts the naphthenic acids into the solvent and yielding an immiscible two-phase liquid mixture, one of which is naphthenic acid-rich solvent phase and the other of which is a substantially napthenic acid-free petroleum distillate phase; and (b) separating and respectively recovering the naphtenic acid-rich solvent phase and petroleum distillate phase.

Danzik, M.

1987-01-06T23:59:59.000Z

182

Operating temperature effects on nozzle coking in a cottonseed oil fueled diesel engine  

E-Print Network [OSTI]

OPERATING TEMPERATURE EFFECTS ON NOZZLE COKING IN A COTTONSEED OIL FUELED DIESEL ENGINE A Thesis CHARLES MICHAEL YARBROUGH Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirements for the degree cf... MASTER OF SCIENCE December 1984 Major Subject: Agricultural Engineering OPERATING TEMPERATURE EFFECTS ON NOZZLE CORING IN A COTTONSEED OIL FUELED DIESEL ENGINE A Thesis by CHARLES MICHAEL YARBROUGH Approved as to style and content by: ayne A. Le...

Yarbrough, Charles Michael

1984-01-01T23:59:59.000Z

183

Health-hazard evaluation report No. HETA-88-377-2120, Armco Coke Oven, Ashland Kentucky  

SciTech Connect (OSTI)

In response to a request from the Oil, Chemical and Atomic Workers International Union, a study was made of possible hazardous working conditions at ARMCO Coke Oven (SIC-3312), Ashland, Kentucky. The facility produces about 1,000,000 tons of coke annually. Of the approximately 400 total employees at the coke oven site, 55 work in the by products area. Air quality sampling results indicated overexposure to both benzene (71432) and coal tar pitch volatiles (CTPVs). Airborne levels of benzene ranged as high as 117 parts per million (ppm) with three of 17 samples being above the OSHA limit of 1ppm. Airborne concentrations of CTPVs ranged as high as 0.38mg/cu m with two of six readings being above OSHA limit of 0.2mg/cu m. Several polynuclear aromatic hydrocarbons were also detected. The authors conclude that by products area workers are potentially overexposed to carcinogens, including benzene, CTPVs, and polynuclear aromatic hydrocarbons. An epidemiologic study is considered unlikely to yield meaningful information at this time, due to the small number of workers and the short follow up period. The authors recommend specific measures for reducing potential employee exposures, including an environmental sampling program, a preventive maintenance program, improved housekeeping procedures, and reducing exposure in operators' booths.

Kinnes, G.M.; Fleeger, A.K.; Baron, S.L.

1991-06-01T23:59:59.000Z

184

An example of alkalization of SiO{sub 2} in a blast furnace coke  

SciTech Connect (OSTI)

Scanning electron microscopy and an electron-microprobe analysis of a sample of blast furnace (BF) coke have revealed alkalization (5.64 wt % Na{sub 2}O + K{sub 2}O) and Al saturation (17.28 wt % Al{sub 2}O{sub 3}) of SiO{sub 2} by BF gases. The K/Na{sub at} value of 1.15 in the new phase (alteration zone) reflects close atomic proportions of the elements and suggests that the abilities to incorporate K and Na during the process are almost equal. This Al saturation and alkalization of SiO{sub 2} indicates an active role for Al along with alkali metals in BF gases. The average width of the altered area in the SiO{sub 2} grain is about 10 m, which suggests that SiO{sub 2} particles of that size can be transformed fully to the new phase, provided that at least one of their faces is open to an external pore (surface of the coke) or internal pore with circulating BF gases. The grains that exceed 10 {mu}m can only be partly altered, which means that smaller SiO{sub 2} grains can incorporate more alkali metals and Al (during their transformation to the Al and alkali-bearing phase) than a similar volume of SiO{sub 2} concentrated in larger grains. Thermodynamic calculations for 100 g{sub solid}/100 g{sub gas} and temperatures 800-1800{sup o}C have shown that the BF gases have very little or no effect on the alkalization of SiO{sub 2}. If the alteration process described in this paper proves to be a generalized phenomenon in blast furnace cokes, then the addition of fine-grained quartz to the surface of the coke before charging a BF can be useful for removing of some of the Al and alkali from the BF gases and reduce coke degradation by alkalis, or at least improve its properties until the temperature reaches approximately 2000{sup o}C. 22 refs., 5 figs., 1 tab.

S.S. Gornostayev; P.A. Tanskanen; E.-P. Heikkinen; O. Kerkkonen; J.J. Haerkki [University of Oulu, Oulu (Finland). Laboratory of Process Metallurgy

2007-09-15T23:59:59.000Z

185

Initial coke deposition on a NiMo/{gamma}-Al{sub 2}O{sub 3} bitumen hydroprocessing catalyst  

SciTech Connect (OSTI)

Athabasca bitumen was hydrocracked over a commercial NiMo/{gamma}-Al{sub 2}O{sub 3} catalyst in two reactors, a microbatch reactor and a 1-L continuous stirred tank reactor (CSTR). Coke deposition on catalyst was measured as a function of hydrogen pressure, time on stream, and liquid composition by measuring the carbon content of the cleaned spent catalyst. The carbon content ranged from 11.3% to 17.6% over the pressure range 6.9--15.2 MPa in CSTR experiments. Batch and CSTR experiments showed a rapid approach to a constant coke content with increasing oil/catalyst ratio. Coke deposition was independent of product composition for residue concentrations ranging from 8% to 32% by weight. Removal of the coke by tetralin at reaction conditions suggested reversible adsorption of residue components on the catalyst surface. A physical model based on clearance of coke by hydrogen in the vicinity of metal crystallites is presented for the coke deposition behavior during the first several hours of hydrocracking use. This model gives good agreement with experimental data, including the effect of reaction time, the ratio of total feed weight to catalyst weight, hydrogen pressure, and feed composition, and it agrees with general observations from industrial usage. The model implies that except at the highest coke levels, the active surfaces of the metal crystallites remain exposed. Severe mass-transfer limitations are caused by the overall narrowing of the pore structure, which in {gamma}-Al{sub 2}O{sub 3} would give very low effective diffusivity for residuum molecules in micropores.

Richardson, S.M.; Nagaishi, Hiroshi; Gray, M.R. [Univ. of Alberta, Edmonton (Canada). Dept. of Chemical Engineering] [Univ. of Alberta, Edmonton (Canada). Dept. of Chemical Engineering

1996-11-01T23:59:59.000Z

186

Usiing NovoCOS cleaning equipment in repairing the furnace-chamber lining in coke batteries 4 & 5 at OAO Koks  

SciTech Connect (OSTI)

Experience with a new surface-preparation technology for the ceramic resurfacing of the refractory furnace-chamber lining in coke batteries is described.

S.G. Protasov; R. Linden; A. Gross [OAO Koks, Kemerovo (Russian Federation)

2009-05-15T23:59:59.000Z

187

Experience and results of new heating control system of coke oven batteries at Rautaruukki Oy Raahe Steel  

SciTech Connect (OSTI)

The latest development and results of the heating control system at Raahe Steel are presented in this paper. From the beginning of coke production in Rautaruukki Oy Raahe Steel (October 1987) the heating control systems have been developed. During the first stage of development work at the coking plant (from year 1987 to 1992), when only the first coke oven battery consisting of 35 ovens was in production, the main progress was in the field of process monitoring. After commissioning of the second stage of the coking plant (November 1992), the development of the new heating control model was started. Target of the project was to develop a dynamic control system which guides the heating of batteries through the various process conditions. Development work took three years and the heating control system was commissioned in the year 1995. Principle of the second generation system is an energy balance calculation, coke end temperature determination and dynamic oven scheduling system. The control is based on simultaneous feedforward and feedback control. The fuzzy logic components were added after about one year experience.

Swanljung, J.; Palmu, P. [Rautaruukki Oy Raahe Steel (Finland)

1997-12-31T23:59:59.000Z

188

Demineralization of petroleum cokes and fly ash samples obtained from the upgrading of Athabasca oil sands bitumen  

SciTech Connect (OSTI)

Today's commercially proved technology to recover oil from the Athabasca oil sands, as practiced by Suncor and Syncrude, involves two major operations, namely: separation of the bitumen from the sand and upgrading of the bitumen to refinery oil. Significant amounts of petroleum coke are produced during the bitumen upgrading process. Suncor burns the bulk of its petroleum coke in boilers to fulfill the energy requirements of the entire operation, still meeting government regulations restricting the amount of sulfur dioxide that can be released to the environment. In contrast, Syncrude is able to burn only 20% of its coke production because of high sulphur dioxide emissions from elsewhere in its operations. The boiler ash (Fly ash) which contains appreciable amounts of metals, such as vanadium, nickel, titianium, iron, aluminum and other elements, is collected in the boiler hoppers and cyclones of the petroleum coke fired steam generation plants. There has been relatively little effort made towards the understanding of the chemical or physical nature of these materials. Knowledge of the physico-chemical properties of these materials will be helpful in assessing their beneficiation and potential use as fuel or metallurigcal coke and the feasibility of extracting some metals, especially Ni and V. In this communication the authors report studies of acid demineralization as a means of reducing ash content of these materials for /sup 13/C NMR spectroscopic investigations.

Majid, A.; Ratcliffe, C.I.; Ripmeester, J.A.

1988-06-01T23:59:59.000Z

189

Proposal of a novel multifunctional energy system for cogeneration of coke, hydrogen, and power - article no. 052001  

SciTech Connect (OSTI)

This paper proposes a novel multifunctional energy system (MES), which cogenerates coke, hydrogen, and power, through the use of coal and coke oven gas (COG). In this system, a new type of coke oven, firing coal instead of COG as heating resource for coking, is adopted. The COG rich in H{sub 2} is sent to a pressure swing adsorption (PSA) unit to separate about 80% of hydrogen first, and then the PSA purge gas is fed to a combined cycle as fuel. The new system combines the chemical processes and power generation system, along with the integration of chemical conversion and thermal energy utilization. In this manner, both the chemical energy of fuel and thermal energy can be used more effectively. With the same inputs of fuel and the same output of coking heat, the new system can produce about 65% more hydrogen than that of individual systems. As a result, the thermal efficiency of the new system is about 70%, and the exergy efficiency is about 66%. Compared with individual systems, the primary energy saving ratio can reach as high as 12.5%. Based on the graphical exergy analyses, we disclose that the integration of synthetic utilization of COG and coal plays a significant role in decreasing the exergy destruction of the MES system. The promising results obtained may lead to a clean coal technology that will utilize COG and coal more efficiently and economically.

Jin, H.G.; Sun, S.; Han, W.; Gao, L. [Chinese Academy of Sciences, Beijing (China)

2009-09-15T23:59:59.000Z

190

Coke oven gas treatment and by-product plant of Magnitogorsk Integrated Iron and Steel Works  

SciTech Connect (OSTI)

Magnitogorsk Integrated Iron and Steel Works, Russia, decided to erect a new coke oven gas treatment and by-product plant to replace the existing obsolete units and to improve the environmental conditions of the area. The paper deals with the technological concept and the design requirements. Commissioning is scheduled at the beginning of 1996. The paper describes H{sub 2}S and NH{sub 3} removal, sulfur recovery and ammonia destruction, primary gas cooling and electrostatic tar precipitation, and the distributed control system that will be installed.

Egorov, V.N.; Anikin, G.J. [Magnitogorsk Integrated Iron and Steel Works, (Russian Federation); Gross, M. [Krupp Koppers GmbH, Essen (Germany)

1995-12-01T23:59:59.000Z

191

Improved wastewater treatment at Wheeling-Pittsburgh Steel Corporations`s Steubenville East Coke Plant  

SciTech Connect (OSTI)

Wheeling-Pittsburgh Steel Corporation recently improved its wastewater treatment at it`s by-products coke plant. This has led to greatly improved effluent quality. Excess ammonia liquor, along with wastewater from the light oil recovery plant, desulfurization facility, and coal pile runoff, must be treated prior to being discharged into the Ohio River. This is accomplished using a biological wastewater treatment plant to remove 99.99% of the organic contaminants and ammonia. Biologically treated, clarified wastewater is now polished in the newly constructed tertiary treatment plant.

Goshe, A.J.; Nodianos, M.J. [Wheeling-Pittsburgh Steel Corp., Follansbee, WV (United States)

1995-12-01T23:59:59.000Z

192

Use of resin-bearing wastes from coke and coal chemicals production at the Novokuznetsk Metallurgical Combine  

SciTech Connect (OSTI)

The coke and coal chemicals plant at the Novokuznetsk Metallurgical Combine is making trial use of a technology that recycles waste products in 'tar ponds.' Specialists from the Ekomash company have installed a recycling unit in one area of the plant's dump, the unit including an inclined conveyor with a steam heater and a receiving hopper The coal preparation shop receives the wastes in a heated bin, where a screw mixes the wastes with pail of the charge for the coking ovens. The mixture subsequently travels along a moving conveyor belt together with the rest of the charge materials. The addition of up to 2% resin-bearing waste materials to the coal charge has not had any significant effect on the strength properties of the coke.

Kul'kova, T.N.; Yablochkin, N.V.; Gal'chenko, A.I.; Karyakina, E.A.; Litvinova, V.A.; Gorbach, D.A.

2007-03-15T23:59:59.000Z

193

Table A3. Refiner/Reseller Prices of Distillate and Residual...  

Gasoline and Diesel Fuel Update (EIA)

A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) Geographic Area Year No. 1 Distillate No. 2...

194

Application of a Plantwide Control Design Procedure to a Distillation Column with Heat Pump  

E-Print Network [OSTI]

(Larsson & Skogestad 2001) to a distillation column heat-integrated by using a heatpump. Top-down analysis) and apply it to a distillation column with heatpump. Plantwide control design should start by formulating

Skogestad, Sigurd

195

ORIGINAL PAPER Twin-Screw Extrusion Processing of Distillers Dried  

E-Print Network [OSTI]

. Physical properties . Protein . Twin-screw extruder Introduction As a consequence of changes in energyORIGINAL PAPER Twin-Screw Extrusion Processing of Distillers Dried Grains with Solubles (DDGS. Twin- screw extrusion studies were performed to investigate the production of nutritionally balanced

196

Rigorous Synthesis and Simulation of Complex Distillation Networks  

E-Print Network [OSTI]

energy-efficient distillation net- works. Complex column networks have substantial potential for energy- thesizing such complex energy-efficient networks. A robust feasibility criterion drives the selection foundations of se st in exploring energy-efficient distillatin exploring energy-efficient distillat ave

Linninger, Andreas A.

197

Separation of Azeotropic Mixtures in Closed Batch Distillation Arrangements  

E-Print Network [OSTI]

Separation of Azeotropic Mixtures in Closed Batch Distillation Arrangements S. Skouras and S to obtain a light and a heavy fraction simultaneously from the top and the bottom of the column, while an intermediate fraction may also be recovered in the middle vessel. Two modifications of the multivessel

Skogestad, Sigurd

198

Solar Ethanol Distillation Oara Neumann,1,3  

E-Print Network [OSTI]

requiring no energy input by conventional sources, with the potential to replace, or significantly reduce-harvesting nanoparticles that capture solar energy for direct liquid-vapor conversion, eliminating the energy O-9 Solar Ethanol Distillation Oara Neumann,1,3 Albert D. Neumann,2 Julius Müller,1

199

Cracking of simulated oil refinery off-gas over a coal char, petroleum coke, and quartz  

SciTech Connect (OSTI)

The cracking of oil refinery off-gas, simulated with a gas mixture containing methane (51%), ethylene (21.4%), ethane (21.1%), and propane (6.5%), over a coal char, petroleum coke, and quartz, respectively, has been studied in a fixed bed reactor. The experiments were performed at temperatures between 850 and 1000{sup o}C and at atmospheric pressure. The results show that the conversions of all species considered increased with increasing temperature. Ethane and propane completely decomposed over all three bed materials in the temperature range investigated. However, the higher initial conversion rates of methane and ethylene cracking at all temperatures were observed only over the coal char and not on the petroleum coke and quartz, indicating a significant catalytic effect of the coal char on methane and ethylene cracking. Methane and ethylene conversions decreased with reaction time due to deactivation of the coal char by carbon deposition on the char surface and, in the later stage of a cracking experiment, became negative, suggesting that methane and ethylene had been formed during the cracking of ethane and propane. 16 refs., 13 figs., 2 tabs.

Yuan Zhang; Jin-hu Wu; Dong-ke Zhang [Chinese Academy of Sciences, Taiyuan (China). Institute of Coal Chemistry

2008-03-15T23:59:59.000Z

200

Petroleum Coke  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-MonthCoalbedPricethe PricetheCity Gate Price81,811

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Petroleum Coke  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30 2013 Macroeconomicper8,170 8,310 8,304PricePriceby81,811 82,516 82,971

202

Design of Extraction Column Methanol Recovery System for the TAME Reactive Distillation Process  

E-Print Network [OSTI]

, methanol recovery 1. Introduction A process of producing TAME via reactive distillation has been presented the bulk of the reaction between C5 and methanol to produce TAME and a reactive distillation. MethanolDesign of Extraction Column Methanol Recovery System for the TAME Reactive Distillation Process

Al-Arfaj, Muhammad A.

203

Improved Swing-Cut Modeling for Planning and Scheduling of Oil-Refinery Distillation Units  

E-Print Network [OSTI]

, Pennsylvania 15213, United States. Crude-oil assays, Distillation, Fractionation, Swing-cuts, Temperature cut with in the nonlinear optimization. 1. INTRODUCTION Distillation or fractionation models for planning and scheduling1 Improved Swing-Cut Modeling for Planning and Scheduling of Oil-Refinery Distillation Units Brenno

Grossmann, Ignacio E.

204

Optimal Operation of a Petlyuk Distillation Column: Energy Savings by Over-fractionating  

E-Print Network [OSTI]

Optimal Operation of a Petlyuk Distillation Column: Energy Savings by Over-fractionating Vidar the unexpected result that over-fractionating one of the product streams in a Petlyuk distillation column may is optimal in some cases. 1. Introduction The Petlyuk distillation column, see Figure 1(a), with a pre-fractionator

Skogestad, Sigurd

205

Integrated Design, Operation and Control of Batch Extractive Distillation with a Middle Vessel  

E-Print Network [OSTI]

into a number of product fractions in a single batch column whereas, in continuous distillation several columnsIntegrated Design, Operation and Control of Batch Extractive Distillation with a Middle Vessel E. K distillation for separating homogeneous minimum-boiling azeotropic mixtures, where the extractive agent

Skogestad, Sigurd

206

Model predictive control of a pilot-scale distillation column using a programmable automation controller  

E-Print Network [OSTI]

Model predictive control of a pilot-scale distillation column using a programmable automation). The controller is tested on a pilot-scale binary distillation column to track reference temperatures. A majorRIO) to control a pilot-scale binary distillation col- umn. Both the PI-controllers and the supervising online MPC

207

Urinary 1-hydroxypyrene concentrations in Chinese coke oven workers relative to job category, respirator usage, and cigarette smoking  

SciTech Connect (OSTI)

1-Hydroxypyrene (1-OHP) is a biomarker of recent exposure to polycyclic aromatic hydrocarbons (PAHs). We investigated whether urinary 1-OHP concentrations in Chinese coke oven workers (COWs) are modulated by job category, respirator usage, and cigarette smoking. The present cross-sectional study measured urinary 1-OHP concentrations in 197 COWs from Coking plant I and 250 COWs from Coking plant II, as well as 220 unexposed referents from Control plant I and 56 referents from Control plant II. Urinary 1-OHP concentrations (geometric mean, {mu}mol/mol creatinine) were 5.18 and 4.21 in workers from Coking plants I and II, respectively. The highest 1-OHP levels in urine were found among topside workers including lidmen, tar chasers, and whistlers. Benchmen had higher 1-OHP levels than other workers at the sideoven. Above 75% of the COWs exceeded the recommended occupational exposure limit of 2.3 {mu}mol/mol creatinine. Respirator usage and increased body mass index (BMI) slightly reduced 1-OHP levels in COWs. Cigarette smoking significantly increased urinary 1-OHP levels in unexposed referents but had no effect in COWs. Chinese COWs, especially topside workers and benchmen, are exposed to high levels of PAHs. Urinary 1-OHP concentrations appear to be modulated by respirator usage and BMI in COWs, as well as by smoking in unexposed referents.

Bo Chen; Yunping Hu; Lixing Zheng; Qiangyi Wang; Yuanfen Zhou; Taiyi Jin [Fudan University, Shanghai (China). School of Public Health

2007-09-15T23:59:59.000Z

208

E-Science Day  

E-Print Network [OSTI]

on December 6, 2011, E-Science Day was a day-long event,regional librarians in e-science, and to expose regionalthe initiation of e-science support projects within their

Abad, Raquel

2012-01-01T23:59:59.000Z

209

Hydroconversion of heavy oils. [Residue of tar sand bitumen distillation  

SciTech Connect (OSTI)

A method is described for hydroconversion of feedstocks consisting essentially of at least one heavy hydrocarbon oil selected from the group consisting of residue of petroleum oil distillation and the residue of tar sand bitumen distillation to enhance the recovery of 350/sup 0/-650/sup 0/F boiling product fraction. The method comprises treating such feed stock with hydrogen at superatmospheric pressure and in the presence of finely divided active hydrogenation catalyst in consecutive reaction stages. An initial reaction stage is carried out at a temperature in the range of 780/sup 0/-825/sup 0/F, and a subsequent reaction stage is directly carried out after the initial reaction stage at a higher temperature in the range of 800/sup 0/F-860/sup 0/F, the temperature of the subsequent reaction stage being at least 20/sup 0/F higher than that of the initial reaction stage.

Garg, D.

1986-08-19T23:59:59.000Z

210

Argonne's Earth Day 2011  

ScienceCinema (OSTI)

Argonne celebrated Earth Day on April 21, 2011 with an event that featured green activities and information booths.

None

2013-04-19T23:59:59.000Z

211

Evaluation of pitches and cokes from solvent-extracted coal materials  

SciTech Connect (OSTI)

Three initial coal-extracted (C-E) samples were received from the West Virginia University (WVU) Chemical Engineering Department. Two samples had been hydrogenated to obtain pitches that satisfy Theological requirements. One of the hydrogenated (HC-E) samples had been extracted by toluene to remove ash and higher molecular weight aromatic compounds. We were unable to measure the softening point and viscosity of the non-hydro treated solid extract sample, Positive characteristics in the HC-E materials were softening points of 113-119{degrees}C, low sulfur and ash. The oxygen and nitrogen content of the HC-E samples may limit future usage in premium carbon and graphite products. Coking values were similar to petroleum pitches. Laboratory anode testing indicates that in combination with standard coal-tar pitch, the HC-E material can be used as a binder pitch.

McHenry, E.R.

1996-12-01T23:59:59.000Z

212

Reactive Distillation for Esterification of Bio-based Organic Acids  

SciTech Connect (OSTI)

The following is the final report of the three year research program to convert organic acids to their ethyl esters using reactive distillation. This report details the complete technical activities of research completed at Michigan State University for the period of October 1, 2003 to September 30, 2006, covering both reactive distillation research and development and the underlying thermodynamic and kinetic data required for successful and rigorous design of reactive distillation esterification processes. Specifically, this project has led to the development of economical, technically viable processes for ethyl lactate, triethyl citrate and diethyl succinate production, and on a larger scale has added to the overall body of knowledge on applying fermentation based organic acids as platform chemicals in the emerging biorefinery. Organic acid esters constitute an attractive class of biorenewable chemicals that are made from corn or other renewable biomass carbohydrate feedstocks and replace analogous petroleum-based compounds, thus lessening U.S. dependence on foreign petroleum and enhancing overall biorefinery viability through production of value-added chemicals in parallel with biofuels production. Further, many of these ester products are candidates for fuel (particularly biodiesel) components, and thus will serve dual roles as both industrial chemicals and fuel enhancers in the emerging bioeconomy. The technical report from MSU is organized around the ethyl esters of four important biorenewables-based acids: lactic acid, citric acid, succinic acid, and propionic acid. Literature background on esterification and reactive distillation has been provided in Section One. Work on lactic acid is covered in Sections Two through Five, citric acid esterification in Sections Six and Seven, succinic acid in Section Eight, and propionic acid in Section Nine. Section Ten covers modeling of ester and organic acid vapor pressure properties using the SPEAD (Step Potential Equilibrium and Dynamics) method.

Fields, Nathan; Miller, Dennis J.; Asthana, Navinchandra S.; Kolah, Aspi K.; Vu, Dung; Lira, Carl T.

2008-09-23T23:59:59.000Z

213

Enhanced Separation Efficiency in Olefin/Paraffin Distillation  

Broader source: Energy.gov [DOE]

This factsheet describes a research project whose main objective is to develop technologies to enhance separation efficiencies by replacing the conventional packing materials with hollow fiber membranes, which have a high specific area and separated channels for both liquid and vapor phases. The use of hollow fibers in distillation columns can help refineries decrease operating costs, reduce greenhouse gas emissions through reduced heating costs, and help expand U.S. refining capacity through improvements to existing sites, without large scale capital investment.

214

Cyanide leaching from soil developed from coking plant purifier waste as influenced by citrate  

SciTech Connect (OSTI)

Soils in the vicinity of manufactured gas plants and coal coking plants are often highly contaminated with cyanides in the form of the compound Prussian blue. The objective of this study was to investigate the influence of citrate on the leaching of iron-cyanide complexes from an extremely acidic soil (pH 2.3) developed from gas purifier waste near a former coking plant. The soil contained 63 g kg{sup -1} CN, 148 g kg{sup -1} Fe, 123 g kg{sup -1} S, and 222 g kg{sup -1} total C. Analysis of the soil by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) spectroscopy revealed the presence of Prussian blue, gypsum, elemental sulfur, jarosite, and hematite. For column leaching experiments, air-dried soil was mixed with purified cristabolite sand at a ratio of 1:3 and packed into chromatography columns. The soil was leached with dilute (0.1 or 1 mM) CaCl{sub 2} solutions and the effluent was collected and analyzed for total and dissolved CN, Ca, Fe, SO{sub 4}, pH, and pe. In the absence of citrate, the total dissolved CN concentration in the effluent was always below current drinking water limits (< 1.92 {mu}M), indicating low leaching potential. Adding citrate at a concentration of 1 mM had little effect on the CN concentrations in the column effluent. Addition of 10 or 100 mM citrate to the influent solution resulted in strong increases in dissolved and colloidal CN concentrations in the effluent.

Tim Mansfeldt; Heike Leyer; Kurt Barmettler; Ruben Kretzschmar [Ruhr-University Bochum, Bochum (Germany). Soil Science and Soil Ecology Group, Faculty of Geosciences

2004-07-01T23:59:59.000Z

215

"Distillation, Absorption and Extraction" April 5-6, 2001 in Bamberg,, Halvorsen NTNU Department of Chemical Engineering  

E-Print Network [OSTI]

distillation · Underwood (1946, 1948a,b), Fractional distillation of multicomponent mixtures · Shiras (1950"Distillation, Absorption and Extraction" April 5-6, 2001 in Bamberg,, Halvorsen NTNU Department Distillation Arrangements by Ivar J. Halvorsen and Sigurd Skogestad Norwegian University of Science

Skogestad, Sigurd

216

Development and Testing of the Advanced CHP System Utilizing the Off-Gas from the Innovative Green Coke Calcining Process in Fluidized Bed  

SciTech Connect (OSTI)

Green petroleum coke (GPC) is an oil refining byproduct that can be used directly as a solid fuel or as a feedstock for the production of calcined petroleum coke. GPC contains a high amount of volatiles and sulfur. During the calcination process, the GPC is heated to remove the volatiles and sulfur to produce purified calcined coke, which is used in the production of graphite, electrodes, metal carburizers, and other carbon products. Currently, more than 80% of calcined coke is produced in rotary kilns or rotary hearth furnaces. These technologies provide partial heat utilization of the calcined coke to increase efficiency of the calcination process, but they also share some operating disadvantages. However, coke calcination in an electrothermal fluidized bed (EFB) opens up a number of potential benefits for the production enhancement, while reducing the capital and operating costs. The increased usage of heavy crude oil in recent years has resulted in higher sulfur content in green coke produced by oil refinery process, which requires a significant increase in the calcinations temperature and in residence time. The calorific value of the process off-gas is quite substantial and can be effectively utilized as an “opportunity fuel” for combined heat and power (CHP) production to complement the energy demand. Heat recovered from the product cooling can also contribute to the overall economics of the calcination process. Preliminary estimates indicated the decrease in energy consumption by 35-50% as well as a proportional decrease in greenhouse gas emissions. As such, the efficiency improvement of the coke calcinations systems is attracting close attention of the researchers and engineers throughout the world. The developed technology is intended to accomplish the following objectives: - Reduce the energy and carbon intensity of the calcined coke production process. - Increase utilization of opportunity fuels such as industrial waste off-gas from the novel petroleum coke calcination process. - Increase the opportunity of heat (chemical and physical) utilization from process off-gases and solid product. - Develop a design of advanced CHP system utilizing off-gases as an “opportunity fuel” for petroleum coke calcinations and sensible heat of calcined coke. A successful accomplishment of the aforementioned objectives will contribute toward the following U.S. DOE programmatic goals: - Drive a 25% reduction in U. S. industrial energy intensity by 2017 in support of EPAct 2005; - Contribute to an 18% reduction in U.S. carbon intensity by 2012 as established by the Administration’s “National Goal to Reduce Emissions Intensity.” 8

Chudnovsky, Yaroslav; Kozlov, Aleksandr

2013-08-15T23:59:59.000Z

217

REX WALHEIM, MS-2 (GREEN) Meal Day 1* Day 2 Day 3 Day 4 Day 5 Day 6 Day 7 -JULY 4th MEAL  

E-Print Network [OSTI]

Special Meal **Day 13 consists of Meals A and B only (B) - Beverage, (FF) - Fresh Food, (I) - Irradiated

218

National Day of Remembrance  

SciTech Connect (OSTI)

Ames Laboratory observed the National Day of Remembrance for weapons workers from the Cold War era with a ceremony held Oct. 27, 2009 at the Ames Public Library.

None

2010-01-01T23:59:59.000Z

219

Conflict Resolution Day  

Broader source: Energy.gov [DOE]

Conflict Resolution Day takes a look at mediation, conciliation, negotiation, arbitration, the ombudsman, and facilitation to resolve conflict in the workplace. Employees and contractors are...

220

Innovative coke oven gas cleaning system for retrofit applications. Environmental Monitoring program. Volume 1 - sampling progrom report. Baseline Sampling Program report  

SciTech Connect (OSTI)

Bethlehem Steel Corporation (BSC), in conjunction with the Department of Energy (DOE) is conducting a Clean Coal Technology (CCT) project at its Sparrows Point, Maryland Coke Oven Plant. This innovative coke oven gas cleaning system combines several existing technologies into an integrated system for removing impurities from Coke Oven Gas (COG) to make it an acceptable fuel. DOE provided cost-sharing under a Cooperative Agreement with BSC. This Cooperative Agreement requires BSC to develop and conduct and Environmental Monitoring Plan for the Clean Coal Technology project and to report the status of the EMP on a quarterly basis. It also requires the preparation of a final report on the results of the Baseline Compliance and Supplemental Sampling Programs that are part of the EMP and which were conducted prior to the startup of the innovative coke oven gas cleaning system. This report is the Baseline Sampling Program report.

Stuart, L.M.

1994-05-27T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Earth Day, Every Day | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQ Contract ESPC IDIQ ContractConsumerofof EnergyEarth Day,

222

Heat Recovery in Distillation by Mechanical Vapor Recompression  

E-Print Network [OSTI]

matc~ can be made between low-grade waste energy sourc~s and process uses, thereby improving plant energ~ efficiency. I A relatively high rate of return on invest-JI ment is expected in most cases. The optimum op, erating conditions are dictated...," Chem. Eng. Prog., Vol. 76:7, pp. 44-49, July 1980. I 2. Anon, "Di,stillation Prime Target for Energ~ Conservation," Oil & Gas Journal, Vol. 76:~6, pp. 92-94, April 17, 1978. I 3. W. F. Kenne'y, "Reducing the Energy Demand o~ Separation Processes...

Becker, F. E.; Zakak, A. I.

223

Multiple steady states during reactive distillation of methyl tert-butyl ether  

SciTech Connect (OSTI)

This paper presents results of computer simulations of the synthesis of methyl tert-butyl ether (MTBE) in a fixed-bed reactor and in a reactive distillation column. These calculations clearly showed the advantages of MTBE synthesis in a catalytic distillation tower. Furthermore, the computer simulations showed that multiple steady states may occur in the reactive distillation column during MTBE synthesis in a broad range of operating conditions. An analysis of some sensitivity studies is presented.

Nijhuis, S.A. (Univ. of Amsterdam (Netherlands). Chemical Engineering Dept.); Kerkhof, F.P.J.M.; Mak, A.N.S. (Comprimo Engineers and Contractors, Amsterdam (Netherlands))

1993-11-01T23:59:59.000Z

224

E-Print Network 3.0 - advanced distillation curve Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

58 (2003) 26712680 www.elsevier.comlocateces Summary: distillation: Advanced simulation and experimental validation. Computers and Chemical Engineering, 22, S371-S......

225

Table A3. Refiner/Reseller Prices of Distillate and Residual...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Marketing Annual 1999 441 Table A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD District, 1983-Present (Cents per Gallon Excluding Taxes) - Continued...

226

E-Print Network 3.0 - atmospheric crude distillation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Problems Summary: and atmospheric distillations of crude-oil mixtures from charging tanks. The crude is then processed in order... of resources: crude marine vessels, storage...

227

Development of a Fuzzy Logic Controller for a Distillation Column using Rockwell Software .  

E-Print Network [OSTI]

??In this thesis, an alternative control method based on Fuzzy Inference System (FIS) is proposed to keep the product composition of a distillation column constant.… (more)

Nizami, Muhammad

2011-01-01T23:59:59.000Z

228

Description: Start | Grid View | Browse by Day OR Group/Topical | Author Index | Keyword Index | Personal Scheduler  

E-Print Network [OSTI]

Knowlton (172b) COAL Direct Chemical Looping Process: Metallurigical Coke and PRB COAL Conversions L. - S

Gilchrist, James F.

229

Holocaust Days of Remembrance  

Broader source: Energy.gov [DOE]

The United States Congress established the Days of Remembrance as our nation’s annual commemoration of the Holocaust and created the United States Holocaust Memorial Museum as a permanent living...

230

Effects of HyperCoal addition on coke strength and thermoplasticity of coal blends  

SciTech Connect (OSTI)

Ashless coal, also known as HyperCoal (HPC), was produced by thermal extraction of three coals of different ranks (Gregory caking coal, Warkworth steam coal, and Pasir subbituminous coal) with 1-methylnaphthalene (1-MN) at 360, 380, and 400{sup o}C. The effects of blending these HPCs into standard coal blends were investigated. Blending HPCs as 5-10% of a standard blend (Kouryusho:Goonyella:K9) enhanced the thermoplasticity over a wide temperature range. For blends made with the Pasir-HPC, produced from a noncaking coal, increasing the extraction temperature from 360 to 400{sup o}C increased the thermoplasticity significantly. Blends containing Warkworth-HPC, produced from a slightly caking coal, had a higher tensile strength than the standard blend in semicoke strength tests. The addition of 10% Pasir-HPC, extracted at 400{sup o}C, increased the tensile strength of the semicokes to the same degree as those made with Gregory-HPC. Furthermore, all HPC blends had a higher tensile strength and smaller weight loss during carbonization. These results suggest that the HPC became integrated into the coke matrix, interacting strongly with the other raw coals. 14 refs., 11 figs., 1 tab.

Toshimasa Takanohashi; Takahiro Shishido; Ikuo Saito [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan). Energy Technology Research Institute

2008-05-15T23:59:59.000Z

231

Role of hydrogen in blast furnaces to improve productivity and decrease coke consumption  

SciTech Connect (OSTI)

The hydrogen contained in blast furnace gases exerts a variety of physical, thermochemical, and kinetic effects as the gases pass through the various zones. The hydrogen is derived from two sources: (1) the dissociation of moisture in the blast air (ambient and injected with hot blast), and (2) the release from partial combustion of supplemental fuels (including moisture in atomizing water, steam, or transport air, if any). With each atom of oxygen (or carbon), the molar amounts of hydrogen released are more than six times higher for natural gas than for coal, and two times higher for natural gas than for oil. Injection of natural gas in a blast furnace is not a new process. Small amounts of natural gas--about 50--80 lb or 1,100--1,700 SCF/ton of hot metal--have been injected in many of the North American blast furnaces since the early 1960s, with excellent operating results. What is new, however, is a batter understanding of how natural gas reacts in the blast furnace and how natural gas and appropriate quantities of oxygen can be used to increase the driving rate or combustion rate of carbon (coke) in the blast furnace without causing hanging furnace and operating problems. The paper discusses the factors limiting blast furnace productivity and how H{sub 2} and O{sub 2} can increase productivity.

Agarwal, J.C.; Brown, F.C.; Chin, D.L.; Stevens, G.; Clark, R.; Smith, D.

1995-12-01T23:59:59.000Z

232

Minimum Energy Consumption in Multicomponent Distillation. 1. Vmin Diagram for a Two-Product Column  

E-Print Network [OSTI]

Minimum Energy Consumption in Multicomponent Distillation. 1. Vmin Diagram for a Two-Product Column how the minimum energy consumption is related to the feed-component distribution for all possible operating points in a two-product distillation column with a multicomponent feed. The classical Underwood

Skogestad, Sigurd

233

Minimum Energy Consumption in Multicomponent Distillation. 3. More Than Three Products and Generalized Petlyuk Arrangements  

E-Print Network [OSTI]

Minimum Energy Consumption in Multicomponent Distillation. 3. More Than Three Products-component feed into M products has been derived. Interestingly, the minimum-energy solution in a complex solution of minimum energy for distillation of a multicomponent feed into multiple products has not been

Skogestad, Sigurd

234

Study of the Distillability of Werner States Using Entanglement Witnesses and Robust Semidefinite Programs  

E-Print Network [OSTI]

We use Robust Semidefinite Programs and Entanglement Witnesses to study the distillability of Werner states. We perform exact numerical calculations which show 2-undistillability in a region of the state space which was previously conjectured to be undistillable. We also introduce bases which yield interesting expressions for the {\\em distillability witnesses} and for a tensor product of Werner states with arbitrary number of copies.

Reinaldo O. Vianna; Andrew C. Doherty

2006-08-11T23:59:59.000Z

235

Optimal operation of a Petlyuk Distillation Column: Energy Savings by Over-fractionation  

E-Print Network [OSTI]

Optimal operation of a Petlyuk Distillation Column: Energy Savings by Over-fractionation · The Petlyuk distillation column, see Figure 1(a), with a pre-fractionator (C1) and a main column (C21 and C22) N-7465 Trondheim, Norway Abstract This work shows the unexpected result that over-fractionating one

Skogestad, Sigurd

236

Distillation Absorption 2010 A.B. de Haan, H. Kooijman and A. Grak (Editors)  

E-Print Network [OSTI]

coupling 1. Introduction Separation by distillation is responsible for a large fraction of immense amountDistillation Absorption 2010 A.B. de Haan, H. Kooijman and A. Górak (Editors) All rights reserved indicated that a 15 component aromatic's mixture can be separated very efficiently into four fractions

Skogestad, Sigurd

237

Optimization of Distillation Processes. Jos A. Caballero* and Ignacio E. Grossmann**  

E-Print Network [OSTI]

that handle more than 90% of separations and purifications. The capital investment for these distillation.87 million TJ) per year, or to a power consumption of 91 GW, or 54 million tons of crude oil. Distillation conditions to minimize the total investment and operating cost. Continuous decisions are related

Grossmann, Ignacio E.

238

Practical Application of Distillation Column Energy Control Systems  

E-Print Network [OSTI]

Closed loop computer control of an ethylene column has been shown to save $350/day in improved ethylene recovery and $150/day in reduced energy consumption. These savings are achieved through material balance optimization and energy balance...

Matthews, S. A.

1980-01-01T23:59:59.000Z

239

Foundation Day Meeting  

E-Print Network [OSTI]

War occurred on National Foundation Day? Hard to say but it must have pleased Tangun who founded Korea 4,340 years ago. Tangun is believed to be the son of a god and a woman transformed from a bear and is said to have established his kingdom...

Hacker, Randi; Tsutsui, William; Haufler, Marsha

2007-11-28T23:59:59.000Z

240

Fractionation studies on the unidentified growth factor(s) in distillers dried solubles  

E-Print Network [OSTI]

. This was called "methyl aloohol soluble fraction of distillers dried solublesi The residue wss air drie4 and labeled "aetna 1 alcohol insoluble fraotion of distillers drie4 solubles". $. r fo m at nt ist e i o ubl s Five hundred gm of distillexs dried... fraction ox Ms- tillers Cried solubles (pH 1)"L "water soluole fr~ction of distillers dried solubles (PH '/)"L ~ "water soluble fxaction of dis~illers dried solubles (pH 11)". ur h r Pra tionatio f th Sate 8 lub e }raut of 9 still rs ed Soluo es a...

Dannenburg, Warren Nathaniel

1955-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Postdoc Research Day  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive SolarCenterYouPortsmouth/PaducahNREL'sResearch Day

242

Dispersion modeling of polycyclic aromatic hydrocarbons from combustion of biomass and fossil fuels and production of coke in Tianjin, China  

SciTech Connect (OSTI)

A USEPA procedure, ISCLT3 (Industrial Source Complex Long-Term), was applied to model the spatial distribution of polycyclic aromatic hydrocarbons (PAHs) emitted from various sources including coal, petroleum, natural gas, and biomass into the atmosphere of Tianjin, China. Benzo(a)pyrene equivalent concentrations (BaPeq) were calculated for risk assessment. Model results were provisionally validated for concentrations and profiles based on the observed data at two monitoring stations. The dominant emission sources in the area were domestic coal combustion, coke production, and biomass burning. Mainly because of the difference in the emission heights, the contributions of various sources to the average concentrations at receptors differ from proportions emitted. The shares of domestic coal increased from {approximately} 43% at the sources to 56% at the receptors, while the contributions of coking industry decreased from {approximately} 23% at the sources to 7% at the receptors. The spatial distributions of gaseous and particulate PAHs were similar, with higher concentrations occurring within urban districts because of domestic coal combustion. With relatively smaller contributions, the other minor sources had limited influences on the overall spatial distribution. The calculated average BaPeq value in air was 2.54 {+-} 2.87 ng/m{sup 3} on an annual basis. Although only 2.3% of the area in Tianjin exceeded the national standard of 10 ng/m{sup 3}, 41% of the entire population lives within this area. 37 refs., 9 figs.

Shu Tao; Xinrong Li; Yu Yang; Raymond M. Coveney, Jr.; Xiaoxia Lu; Haitao Chen; Weiran Shen [Peking University, Beijing (China). Laboratory for Earth Surface Processes, College of Environmental Sciences

2006-08-01T23:59:59.000Z

243

Distillation sequence for the purification and recovery of hydrocarbons  

DOE Patents [OSTI]

This invention is an improved distillation sequence for the separation and purification of ethylene from a cracked gas. A hydrocarbon feed enters a C2 distributor column. The top of the C2 distributor column is thermally coupled to an ethylene distributor column, and the bottoms liquid of a C2 distributor column feeds a deethanizer column. The C2 distributor column utilizes a conventional reboiler. The top of the ethylene distributor is thermally coupled with a demethanizer column, and the bottoms liquid of the ethylene distributor feeds a C2 splitter column. The ethylene distributor column utilizes a conventional reboiler. The deethanizer and C2 splitter columns are also thermally coupled and operated at a substantially lower pressure than the C2 distributor column, the ethylene distributor column, and the demethanizer column. Alternatively, a hydrocarbon feed enters a deethanizer column. The top of the deethanizer is thermally coupled to an ethylene distributor column, and the ethylene distributor column utilizes a conventional reboiler. The top of the ethylene distributor column is thermally coupled with a demethanizer column, and the bottoms liquid of the ethylene distributor column feeds a C2 splitter column. The C2 splitter column operates at a pressure substantially lower than the ethylene distributor column, the demethanizer column, and the deethanizer column.

Reyneke, Rian (Katy, TX); Foral, Michael (Aurora, IL); Papadopoulos, Christos G. (Naperville, IL); Logsdon, Jeffrey S. (Naperville, IL); Eng, Wayne W. Y. (League City, TX); Lee, Guang-Chung (Houston, TX); Sinclair, Ian (Warrington, GB)

2007-12-25T23:59:59.000Z

244

Simple rules help select best hydrocarbon distillation scheme  

SciTech Connect (OSTI)

Separation economics depend mainly on investment for major equipment and energy consumption. This relationship, together with the fact that, in most cases, many alternative schemes will be proposed, make it essential to find an optimum scheme that minimizes overall costs. Practical solutions are found by applying heuristics -- exploratory problem-solving techniques that eliminate alternatives without applying rigorous mathematical procedures. These techniques have been applied to a case study. In the case study, a hydrocarbon mixture will be transported through a pipeline to a fractionation plant, where it will be separated into commercial products for distribution. The fractionation will consist of a simple train of distillation columns, the sequence of which will be defined by applying heuristic rules and determining the required thermal duties for each column. The facility must separate ethane, propane and mixed butanes, natural gasoline (light straight-run, or LSR, gasoline), and condensate (heavy naphtha). The ethane will be delivered to an ethylene plant as a gaseous stream, the propane and butanes will be stored in cryogenic tanks, and the gasoline and heavy naphtha also will be stored.

Sanchezllanes, M.T.; Perez, A.L.; Martinez, M.P.; Aguilar-Rodriguez, E.; Rosal, R. del (Inst. Mexicano del Petroleo, Mexico City (Mexico))

1993-12-06T23:59:59.000Z

245

Proceedings, Dean's Day 1999  

SciTech Connect (OSTI)

On January 14--15, 1999, Sandia National Laboratories sponsored Deans Day, a conference for the Deans of Engineering and other executive-level representatives from 29 invited universities. Through breakout sessions and a wrap-up discussion, university and Sandia participants identified activities to further develop their strategic relationships. The four primary activities are: (A) concentrate joint efforts on current and future research strengths and needs; (B) attract the best students (at all grade levels) to science and engineering; (C) promote awareness of the need for and work together to influence a national science and technology R and D policy; and (D) enable the universities and Sandia to be true allies, jointly pursuing research opportunities and funding from government agencies and industry.

Zanner, M.A.

1999-03-01T23:59:59.000Z

246

Water distillation using waste engine heat from an internal combustion engine  

E-Print Network [OSTI]

To meet the needs of forward deployed soldiers and disaster relief personnel, a mobile water distillation system was designed and tested. This system uses waste engine heat from the exhaust flow of an internal combustion ...

Mears, Kevin S

2006-01-01T23:59:59.000Z

247

Feeding Value of Wet Sorghum Distillers Grains for Growing and Finishing Beef Cattle  

E-Print Network [OSTI]

Feeding Value of Wet Sorghum Distillers Grains for Growing and Finishing Beef Cattle Ethanol, but sorghum grain is commonly either blended with corn before use or used as the sole grain for ethanol

248

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

132.9 1,418.3 See footnotes at end of table. 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State Energy Information Administration ...

249

Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...  

Gasoline and Diesel Fuel Update (EIA)

839.2 135.0 1,251.9 See footnotes at end of table. 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State Energy Information Administration ...

250

Overview of used antifreeze and industrial glycol recycling by vacuum distillation  

SciTech Connect (OSTI)

A leading method of reclaiming ethylene glycol from both used automotive coolants and waste industrial glycol streams is vacuum distillation. Over 15 million gallons per year of total glycols are recovered by this technology, which are marketed for use in antifreeze and industrial chemicals. It is a robust technology, tolerant of many common feed contaminants, and producing minimum waste. This paper presents an overview of vacuum distillation as one part of a multistep process for recovering glycols from a wide variety of feedstreams. Described are industry practices for laboratory prescreening of feedstreams, process adjustments and pretreatments, distillation technologies and post-distillation polishing methods. In each section, information and data are presented from two independent facilities and for several streams processed at each facility. It is concluded that the facilities participating in this study can reliably produce ethylene glycol suitable for the production of ASTM specification engine coolants.

Frye, D.K. [Filter Recovery Services, Alexandria, VA (United States); Chan, K.; Pourhassanian, C. [DeMenno/Kerdoon, Inc., Compton, CA (United States)

1999-08-01T23:59:59.000Z

251

The Scaleup of Structured Packing from Distillation Pilot Plant Testing to Commercial Application  

E-Print Network [OSTI]

fractionator was performed, it was necessary to inventory the column with feed and, under total reflux conditions, draw off distillate or bottoms product until the proper composition profile was achieved. To investigate various design options, both... stream by a factor of five. In summary, from the customer's point of view, the application of structured packing to the main fractionator in the SFP fractionation train is a cOOluercial success. NEW DISTILLATION DEVELOPMENT PILOT PLANT Since...

Berven, O. J.; Ulowetz, M. A.

252

Experimental and analytical studies of hydrocarbon yields under dry-, steam-, and steam-with-propane distillation  

E-Print Network [OSTI]

EXPERIMENTAL AND ANALYTICAL STUDIES OF HYDROCARBON YIELDS UNDER DRY-, STEAM-, AND STEAM-WITH- PROPANE DISTILLATION A Dissertation by NAMIT JAISWAL Submitted to the Office of Graduate Studies of Texas A&M University...-WITH- PROPANE-DISTILLATION A Dissertation by NAMIT JAISWAL Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY Approved...

Jaiswal, Namit

2007-09-17T23:59:59.000Z

253

PILOT-SCALE REMOVAL OF FLUORIDE FROM LEGACY PLUTONIUM MATERIALS USING VACUUM SALT DISTILLATION  

SciTech Connect (OSTI)

Between September 2009 and January 2011, the Savannah River National Laboratory (SRNL) and HB-Line designed, developed, tested, and successfully deployed a system for the distillation of chloride salts. In 2011, SRNL adapted the technology for the removal of fluoride from fluoride-bearing salts. The method involved an in situ reaction between potassium hydroxide (KOH) and the fluoride salt to yield potassium fluoride (KF) and the corresponding oxide. The KF and excess KOH can be distilled below 1000{deg}C using vacuum salt distillation (VSD). The apparatus for vacuum distillation contains a zone heated by a furnace and a zone actively cooled using either recirculated water or compressed air. During a vacuum distillation operation, a sample boat containing the feed material is placed into the apparatus while it is cool, and the system is sealed. The system is evacuated using a vacuum pump. Once a sufficient vacuum is attaned, heating begins. Volatile salts distill from the heated zone to the cooled zone where they condense, leaving behind the non-volatile material in the feed boat. Studies discussed in this report were performed involving the use of non-radioactive simulants in small-scale and pilot-scale systems as well as radioactive testing of a small-scale system with plutonium-bearing materials. Aspects of interest include removable liner design considerations, boat materials, in-line moisture absorption, and salt deposition.

Pierce, R. A.; Pak, D. J.

2012-09-11T23:59:59.000Z

254

Earth Day 2010: Earth Day 40th Anniversary Poster  

E-Print Network [OSTI]

EGJ Issue 30 Earth Day 2010 ISSN 1076-7975 In celebration of 40 Earth Day the Electronic GreenEconomics, Poznan, Poland. Earth image used from www.sxc.hu.

Nowacka, Izabela

2010-01-01T23:59:59.000Z

255

Study on the effect of heat treatment and gasification on the carbon structure of coal chars and metallurgical cokes using fourier transform Raman spectroscopy  

SciTech Connect (OSTI)

Differences in the development of carbon structures between coal chars and metallurgical cokes during high-temperature reactions have been investigated using Raman spectroscopy. These are important to differentiate between different types of carbons in dust recovered from the top gas of the blast furnace. Coal chars have been prepared from a typical injectant coal under different heat-treatment conditions. These chars reflected the effect of peak temperature, residence time at peak temperature, heating rate and pressure on the evolution of their carbon structures. The independent effect of gasification on the development of the carbon structure of a representative coal char has also been studied. A similar investigation has also been carried out to study the effect of heat-treatment temperature (from 1300 to 2000{sup o}C) and gasification on the carbon structure of a typical metallurgical coke. Two Raman spectral parameters, the intensity ratio of the D band to the G band (I{sub D}/I{sub G}) and the intensity ratio of the valley between D and G bands to the G band (I{sub V}/I{sub G}), have been found useful in assessing changes in carbon structure. An increase in I{sub D}/I{sub G} indicates the growth of basic graphene structural units across the temperature range studied. A decrease in I{sub V}/I{sub G} appears to suggest the elimination of amorphous carbonaceous materials and ordering of the overall carbon structure. The Raman spectral differences observed between coal chars and metallurgical cokes are considered to result from the difference in the time-temperature history between the raw injectant coal and the metallurgical coke and may lay the basis for differentiation between metallurgical coke fines and coal char residues present in the dust carried over the top of the blast furnace. 41 refs., 17 figs., 3 tabs.

S. Dong; P. Alvarez; N. Paterson; D.R. Dugwell; R. Kandiyoti [Imperial College London, London (United Kingdom). Department of Chemical Engineering

2009-03-15T23:59:59.000Z

256

The cough response to ultrasonically nebulized distilled water in heart-lung transplantation patients  

SciTech Connect (OSTI)

As a result of clinical heart-lung transplantation, the lungs are denervated below the level of the tracheal anastomosis. It has been questioned whether afferent vagal reinnervation occurs after surgery. Here we report the cough frequency, during inhalation of ultrasonically nebulized distilled water, of 15 heart-lung transplant patients studied 6 wk to 36 months after surgery. They were compared with 15 normal subjects of a similar age and sex. The distribution of the aerosol was studied in five normal subjects using /sup 99m/technetium diethylene triamine pentaacetate (/sup 99m/Tc-DTPA) in saline. In seven patients, the sensitivity of the laryngeal mucosa to instilled distilled water (0.2 ml) was tested at the time of fiberoptic bronchoscopy by recording the cough response. Ten percent of the aerosol was deposited onto the larynx and trachea, 56% on the central airways, and 34% in the periphery of the lung. The cough response to the aerosol was strikingly diminished in the patients compared with normal subjects (p less than 0.001), but all seven patients coughed when distilled water was instilled onto the larynx. As expected, the laryngeal mucosa of heart-lung transplant patients remains sensitive to distilled water. However, the diminished coughing when the distilled water is distributed by aerosol to the central airways supports the view that vagal afferent nerves do not reinnervate the lungs after heart-lung transplantation, up to 36 months after surgery.

Higenbottam, T.; Jackson, M.; Woolman, P.; Lowry, R.; Wallwork, J.

1989-07-01T23:59:59.000Z

257

Source book for planning nuclear dual-purpose electric/distillation desalination plants  

SciTech Connect (OSTI)

A source book on nuclear dual-purpose electric/distillation desalination plants was prepared to assist government and other planners in preparing broad evaluations of proposed applications of dual-purpose plants. The document is divided into five major sections. Section 1 presents general discussions relating to the benefits of dual-purpose plants, and spectrum for water-to-power ratios. Section 2 presents information on commercial nuclear plants manufactured by US manufacturers. Section 3 gives information on distillation desalting processes and equipment. Section 4 presents a discussion on feedwater pretreatment and scale control. Section 5 deals with methods for coupling the distillation and electrical generating plants to operate in the dual mode.

Reed, S.A.

1981-02-01T23:59:59.000Z

258

New Design Methods And Algorithms For High Energy-Efficient And Low-cost Distillation Processes  

SciTech Connect (OSTI)

This project sought and successfully answered two big challenges facing the creation of low-energy, cost-effective, zeotropic multi-component distillation processes: first, identification of an efficient search space that includes all the useful distillation configurations and no undesired configurations; second, development of an algorithm to search the space efficiently and generate an array of low-energy options for industrial multi-component mixtures. Such mixtures are found in large-scale chemical and petroleum plants. Commercialization of our results was addressed by building a user interface allowing practical application of our methods for industrial problems by anyone with basic knowledge of distillation for a given problem. We also provided our algorithm to a major U.S. Chemical Company for use by the practitioners. The successful execution of this program has provided methods and algorithms at the disposal of process engineers to readily generate low-energy solutions for a large class of multicomponent distillation problems in a typical chemical and petrochemical plant. In a petrochemical complex, the distillation trains within crude oil processing, hydrotreating units containing alkylation, isomerization, reformer, LPG (liquefied petroleum gas) and NGL (natural gas liquids) processing units can benefit from our results. Effluents from naphtha crackers and ethane-propane crackers typically contain mixtures of methane, ethylene, ethane, propylene, propane, butane and heavier hydrocarbons. We have shown that our systematic search method with a more complete search space, along with the optimization algorithm, has a potential to yield low-energy distillation configurations for all such applications with energy savings up to 50%.

Agrawal, Rakesh

2013-11-21T23:59:59.000Z

259

The Products of the Destructive Distillation of Keratin in the Form of Leather  

E-Print Network [OSTI]

ure to the air. After this came a white crystal­ line solid, fourth a reddish fciquid, fifth a red­ dish crystalline compound and sixth the black oil spoken of abovd. A volume of the distillate, equaling about a liter was collected and the two... the material the temperature rose to 200° C. and then reduction started and the temperature fell rapidly. The tar or oil constitutes from 3 to 4 per cent of the weight of the leather used. The aqueous portion of the distillate was subjected to a fractional...

Rose, Reed Phillips

1913-01-01T23:59:59.000Z

260

Process for converting heavy oil deposited on coal to distillable oil in a low severity process  

DOE Patents [OSTI]

A process for removing oil from coal fines that have been agglomerated or blended with heavy oil comprises the steps of heating the coal fines to temperatures over 350.degree. C. up to 450.degree. C. in an inert atmosphere, such as steam or nitrogen, to convert some of the heavy oil to lighter, and distilling and collecting the lighter oils. The pressure at which the process is carried out can be from atmospheric to 100 atmospheres. A hydrogen donor can be added to the oil prior to deposition on the coal surface to increase the yield of distillable oil.

Ignasiak, Teresa (417 Heffernan Drive, Edmonton, Alberta, CA); Strausz, Otto (13119 Grand View Drive, Edmonton, Alberta, CA); Ignasiak, Boleslaw (417 heffernan Drive, Edmonton, Alberta, CA); Janiak, Jerzy (17820 - 76 Ave., Edmonton, Alberta, CA); Pawlak, Wanda (3046 - 11465 - 41 Avenue, Edmonton, Alberta, CA); Szymocha, Kazimierz (3125 - 109 Street, Edmonton, Alberta, CA); Turak, Ali A. (Edmonton, CA)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Earth Day 2014 Photo Contest  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Earth Day 2014 Photo Contest CALLING ALL PHOTOGRAPHERS Professionals, amateurs, and the camera sharp shooter We invite all DOE employees and DOE contractors to share images of...

262

George Washington Carver Recognition Day  

Broader source: Energy.gov [DOE]

In commemoration of George Washington Carver’s life and work, Congress declared January 5 as George Washington Carver Recognition Day.

263

Further investigation of the impact of the co-combustion of tire-derived fuel and petroleum coke on the petrology and chemistry of coal combustion products  

SciTech Connect (OSTI)

A Kentucky cyclone-fired unit burns coal and tire-derived fuel, sometimes in combination with petroleum coke. A parallel pulverized combustion (pc) unit at the same plant burns the same coal, without the added fuels. The petrology, chemistry, and sulfur isotope distribution in the fuel and resulting combustion products was investigated for several configurations of the fuel blend. Zinc and Cd in the combustion products are primarily contributed from the tire-derived fuel, the V and Ni are primarily from the petroleum coke, and the As and Hg are probably largely from the coal. The sulfur isotope distribution in the cyclone unit is complicated due to the varying fuel sources. The electrostatic precipitator (ESP) array in the pc unit shows a subtle trend towards heavier S isotopic ratios in the cooler end of the ESP.

Hower, J.C.; Robertson, J.D.; Elswick, E.R.; Roberts, J.M.; Brandsteder, K.; Trimble, A.S.; Mardon, S.M. [University of Kentucky, Lexington, KY (United States). Center for Applied Energy Research

2007-07-01T23:59:59.000Z

264

Gross Input to Atmospheric Crude Oil Distillation Units  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs U.S.WyomingExpansion 5Wellhead99.6Year Jan6 441Day)

265

Determination of the effect of different additives in coking blends using a combination of in situ high-temperature {sup 1}H NMR and rheometry  

SciTech Connect (OSTI)

High-temperature {sup 1}H NMR and rheometry measurements were carried out on 4:1 wt/wt blends of a medium volatile bituminous coal with two anthracites, two petroleum cokes, charcoal, wood, a low-temperature coke breeze, tyre crumb, and active carbon to determine the effects on fluidity development to identify the parameters responsible for these effects during pyrolysis and to study possible relationships among the parameters derived from these techniques. Positive, negative, and neutral effects were identified on the concentration of fluid material. Small positive effects (ca. 5-6%) were caused by blending the coal with petroleum cokes. Charcoal, wood, and active carbon all exerted negative effects on concentration (18-27% reduction) and mobility (12-25% reduction in T2) of the fluid phase, which have been associated with the inert character and high surface areas of these additives that adsorb the fluid phase of the coal. One of the anthracites and the low-temperature coke breeze caused deleterious effects to a lesser extent on the concentration (7-12%) and mobility (13-17%) of the fluid material, possibly due to the high concentration of metals in these additives (ca. 11% ash). Despite the high fluid character of tyre crumb at the temperature of maximum fluidity of the coal (73%), the mobility of the fluid phase of the blend was lower than expected. The comparison of {sup 1}H NMR and rheometry results indicated that to account for the variations in minimum complex viscosity for all the blends, both the maximum concentration of fluid phase and the maximum mobility of the fluid material had to be considered. For individual blends, two exponential relationships have been found between the complex viscosity and the concentration of solid phase in both the softening and resolidification stages but the parameters are different for each blend. 30 refs., 8 figs., 5 tabs.

Miguel C. Diaz; Karen M. Steel; Trevor C. Drage; John W. Patrick; Colin E. Snape [Nottingham University, Nottingham (United Kingdom). Nottingham Fuel and Energy Centre, School of Chemical, Environmental and Mining Engineering

2005-12-01T23:59:59.000Z

266

Effects of polymerization and briquetting parameters on the tensile strength of briquettes formed from coal coke and aniline-formaldehyde resin  

SciTech Connect (OSTI)

In this work, the utilization of aniline (C{sub 6}H{sub 7}N) formaldehyde (HCHO) resins as a binding agent of coke briquetting was investigated. Aniline (AN) formaldehyde (F) resins are a family of thermoplastics synthesized by condensing AN and F in an acid solution exhibiting high dielectric strength. The tensile strength sharply increases as the ratio of F to AN from 0.5 to 1.6, and it reaches the highest values between 1.6 and 2.2 F/AN ratio; it then slightly decreases. The highest tensile strength of F-AN resin-coke briquette (23.66 MN/m{sup 2}) was obtained from the run with 1.5 of F/AN ratio by using (NH4){sub 2}S{sub 2}O{sub 8} catalyst at 310 K briquetting temperature. The tensile strength of F-AN resin-coke briquette slightly decreased with increasing the catalyst percent to 0.10%, and then it sharply decreased to zero with increasing the catalyst percent to 0.2%. The effect of pH on the tensile strength is irregular. As the pH of the mixture increases from 9.0 to 9.2, the tensile strength shows a sharp increase, and the curve reaches a plateau value between pH 9.3 and 9.9; then the tensile strength shows a slight increase after pH = 9.9.

Demirbas, A.; Simsek, T. [Selcuk University, Konya (Turkey)

2006-10-15T23:59:59.000Z

267

Trinity College Day Information Booklet  

E-Print Network [OSTI]

time places and caters for children aged 3 months to 4.5 years. It is managed on a day to day basis by the nursery manager, supervisor and deputy supervisor, and is supported and advised by a Nursery Advisory, Nursery Manager, Supervisor and Representative of Staff members of the Nursery, Students Parents, Staff

O'Mahony, Donal E.

268

Efficient use of an intermediate reboiler or condenser in a binary distillation  

SciTech Connect (OSTI)

The impact of an intermediate reboiler or condenser on the distillation of ideal binary mixtures into pure product streams is studied using a simplified model. The advantage of heuristics derived from this study is that they can quickly tell a process engineer if an intermediate reboiler or condenser is going to be effective in improving the efficiency and, of the two options, which one would be more effective. The heuristics simply states that if the actual fraction of liquid in a given feed is less than that with the maximum thermodynamic efficiency for distillation with no intermediate reboiler or condenser, then an intermediate condenser not only substantially improves the thermodynamic efficiency but is also more effective than an intermediate reboiler. An analogous heuristics exists for the intermediate reboiler when the fraction of liquid in the feed is greater than the optimum. Quick identification of cases that can achieve a substantial improvement in efficiency provides an incentive to search for the proper utilities needed for the intermediate reboiler or condenser. When relatively pure feed streams (concentration of either component greater than 90%) are distilled, the extremely low efficiencies of distillation can be remarkably improved by using an intermediate reboiler or condenser.

Agrawal, R.; Herron, D.M. [Air Products and Chemicals, Inc., Allentown, PA (United States)] [Air Products and Chemicals, Inc., Allentown, PA (United States)

1998-06-01T23:59:59.000Z

269

Integrated Column Designs for Minimum Energy and Entropy Requirements in Multicomponent Distillation  

E-Print Network [OSTI]

prefer a process where the energy may be supplied at a low temperature and cooling may be supplied law). This leads us to the reversible Petlyuk arrangement. However the total required heat supply). A characteristic of the reversible distillation column is that some of the heat is supplied continuously along

Skogestad, Sigurd

270

Middle distillate hydrotreatment zeolite catalysts containing Pt/Pd or Ni  

E-Print Network [OSTI]

A study on middle distillate hydrotreatment zeolite catalysts containing Pt/Pd and/or Ni was performed. The effect of the addition of the corresponding CoMo, CoMoPd, CoMoPtPd and CoMoNi in PdNiPt-zeolite, Pt-zeolite, Ni-zeolite, and Pd...

Marin-Rosas, Celia

2009-05-15T23:59:59.000Z

271

UV Resonance Raman Characterization of Polycyclic Aromatic Hydrocarbons in Coal Liquid Distillates*  

E-Print Network [OSTI]

UV Resonance Raman Characterization of Polycyclic Aromatic Hydrocarbons in Coal Liquid Distillates samples, such as petroleum and coal, or for man-made samples, such as coal liquids, a major desire- nique for studying coal-liquid samples. 1-4 We demon- strated that the Raman spectra of polycyclic

Asher, Sanford A.

272

Distillate fuel-oil processing for phosphoric acid fuel-cell power plants  

SciTech Connect (OSTI)

The current efforts to develop distillate oil-steam reforming processes are reviewed, and the applicability of these processes for integration with the fuel cell are discussed. The development efforts can be grouped into the following processing approaches: high-temperature steam reforming (HTSR); autothermal reforming (ATR); autothermal gasification (AG); and ultra desulfurization followed by steam reforming. Sulfur in the feed is a key problem in the process development. A majority of the developers consider sulfur as an unavoidable contaminant of distillate fuel and are aiming to cope with it by making the process sulfur-tolerant. In the HTSR development, the calcium aluminate catalyst developed by Toyo Engineering represents the state of the art. United Technology (UTC), Engelhard, and Jet Propulsion Laboratory (JPL) are also involved in the HTSR research. The ATR of distillate fuel is investigated by UTC and JPL. The autothermal gasification (AG) of distillate fuel is being investigated by Engelhard and Siemens AG. As in the ATR, the fuel is catalytically gasified utilizing the heat generated by in situ partial combustion of feed, however, the goal of the AG is to accomplish the initial breakdown of the feed into light gases and not to achieve complete conversion to CO and H/sub 2/. For the fuel-cell integration, a secondary reforming of the light gases from the AG step is required. Engelhard is currently testing a system in which the effluent from the AG section enters the steam-reforming section, all housed in a single vessel. (WHK)

Ushiba, K. K.

1980-02-01T23:59:59.000Z

273

Graphical Visualisation of Minimum Energy Requirements for Multi-Effect Distillation Arrangements  

E-Print Network [OSTI]

1 Graphical Visualisation of Minimum Energy Requirements for Multi-Effect Distillation Arrangements of this paper is to present a simple graphical method for obtaining the energy usage and to compare the energy of Chemical Engineering, 7491 Trondheim, Norway Abstract The minimum energy requirements of six different heat

Skogestad, Sigurd

274

Hybrid magic state distillation for universal fault-tolerant quantum computation  

E-Print Network [OSTI]

A set of stabilizer operations augmented by some special initial states known as 'magic states', gives the possibility of universal fault-tolerant quantum computation. However, magic state preparation inevitably involves nonideal operations that introduce noise. The most common method to eliminate the noise is magic state distillation (MSD) by stabilizer operations. Here we propose a hybrid MSD protocol by connecting a four-qubit H-type MSD with a five-qubit T-type MSD, in order to overcome some disadvantages of the previous MSD protocols. The hybrid MSD protocol further integrates distillable ranges of different existing MSD protocols and extends the T-type distillable range to the stabilizer octahedron edges. And it provides considerable improvement in qubit cost for almost all of the distillable range. Moreover, we experimentally demonstrate the four-qubit H-type MSD protocol using nuclear magnetic resonance technology, together with the previous five-qubit MSD experiment, to show the feasibility of the hybrid MSD protocol.

Wenqiang Zheng; Yafei Yu; Jian Pan; Jingfu Zhang; Jun Li; Zhaokai Li; Dieter Suter; Xianyi Zhou; Xinhua Peng; Jiangfeng Du

2014-12-11T23:59:59.000Z

275

Effect of Narrow Cut Oil Shale Distillates on HCCI Engine Performance  

SciTech Connect (OSTI)

In this investigation, oil shale crude obtained from the Green River Formation in Colorado using Paraho Direct retorting was mildly hydrotreated and distilled to produce 7 narrow boiling point fuels of equal volumes. The resulting derived cetane numbers ranged between 38.3 and 43.9. Fuel chemistry and bulk properties strongly correlated with boiling point.

Eaton, Scott J [ORNL; Bunting, Bruce G [ORNL; Lewis Sr, Samuel Arthur [ORNL; Fairbridge, Craig [National Centre for Upgrading Technology, Canada

2009-01-01T23:59:59.000Z

276

Black-Box Identification for PLC based MPC of a Binary Distillation Column  

E-Print Network [OSTI]

Black-Box Identification for PLC based MPC of a Binary Distillation Column B. Huyck ,, F. Logist J is to upgrade the control system with a linear MPC running on a PLC. However, before a model based controller can be used on a PLC, an accurate (but simple) process model has to be constructed. Hence, the aim

277

HYDROGEN DISTILLATION AT THE DEUTERIUM REMOVAL UNIT OF MuCap EXPERIMENT  

E-Print Network [OSTI]

321 HYDROGEN DISTILLATION AT THE DEUTERIUM REMOVAL UNIT OF MuCap EXPERIMENT I.A. Alekseev, E hydrogen gas (so- called protium) must be used. It is necessary to avoid transfers of - to impurities imposes strict and critical requirements on the hydrogen gas system supporting the detector. Desirable

Titov, Anatoly

278

How Do You Observe Earth Day Every Day? | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Observe Earth Day Every Day? How Do You Observe Earth Day Every Day? April 23, 2009 - 1:44pm Addthis Yesterday was officially Earth Day, but really, every day should be Earth Day....

279

Reduction of COD in leachate from a hazardous waste landfill adjacent to a coke-making facility  

SciTech Connect (OSTI)

A hazardous waste landfill adjacent to a coke manufacturing facility was in operation between July 1990 and December 1991. A system was constructed to collect and treat the leachate from the landfill prior to discharge to the river. Occasionally, the discharge from the treatment facility exceeded the permit limitations for Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD), and Total Organic Carbon (TOC). The objectives of this study were to determine treatment methods which would enable compliance with the applicable discharge limits; to establish the desired operating conditions of the process; and to investigate the effect of various parameters such as pH, catalyst dosage, and reaction time on the COD destruction efficiency. The characteristics of the landfill leachate in question were significantly variable in terms of chemical composition. A review of the influent quality data suggests that the COD concentration ranges between 80 and 390 mg/l. The oxidation processes using Fenton`s reagent or a combination of UV/hydrogen peroxide/catalyst are capable of reducing the COD concentration of the leachate below the discharge limitation of 35 mg/l. The estimated capital cost associated with the Fenton`s reagent process is approximately $525,000, and the annual operating and maintenance cost is $560,000. The estimated capital cost for the UV/hydrogen peroxide/catalyst treatment system is $565,000. The annual operating and maintenance cost of this process would be approximately $430,000.

Banerjee, K.; O`Toole, T.J. [Chester Environmental, Moon Township, PA (United States)

1995-12-01T23:59:59.000Z

280

Fuel-blending stocks from the hydrotreatment of a distillate formed by direct coal liquefaction  

SciTech Connect (OSTI)

The direct liquefaction of coal in the iron-catalyzed Suplex process was evaluated as a technology complementary to Fischer-Tropsch synthesis. A distinguishing feature of the Suplex process, from other direct liquefaction processes, is the use of a combination of light- and heavy-oil fractions as the slurrying solvent. This results in a product slate with a small residue fraction, a distillate/naphtha mass ratio of 6, and a 65.8 mass % yield of liquid fuel product on a dry, ash-free coal basis. The densities of the resulting naphtha (C{sub 5}-200{sup o}C) and distillate (200-400{sup o}C) fractions from the hydroprocessing of the straight-run Suplex distillate fraction were high (0.86 and 1.04 kg/L, respectively). The aromaticity of the distillate fraction was found to be typical of coal liquefaction liquids, at 60-65%, with a Ramsbottom carbon residue content of 0.38 mass %. Hydrotreatment of the distillate fraction under severe conditions (200{sup o}C, 20.3 MPa, and 0.41 g{sub feed} h{sup -1} g{sub catalyst}{sup -1}) with a NiMo/Al{sub 2}O{sub 3} catalyst gave a product with a phenol content of {lt}1 ppm, a nitrogen content {lt}200 ppm, and a sulfur content {lt}25 ppm. The temperature was found to be the main factor affecting diesel fraction selectivity when operating at conditions of WHSV = 0.41 g{sub feed} h{sup -1} g{sub catalyst}{sup -1} and PH{sub 2} = 20.3 MPa, with excessively high temperatures (T {gt} 420{sup o}C) leading to a decrease in diesel selectivity. The fuels produced by the hydroprocessing of the straight-run Suplex distillate fraction have properties that make them desirable as blending components, with the diesel fraction having a cetane number of 48 and a density of 0.90 kg/L. The gasoline fraction was found to have a research octane number (RON) of 66 and (N + 2A) value of 100, making it ideal as a feedstock for catalytic reforming and further blending with Fischer-Tropsch liquids. 44 refs., 9 figs., 12 tabs.

Andile B. Mzinyati [Sasol Technology Research and Development, Sasolburg (South Africa). Fischer-Tropsch Refinery Catalysis

2007-09-15T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

APPLICATION OF VACUUM SALT DISTILLATION TECHNOLOGY FOR THE REMOVAL OF FLUORIDE  

SciTech Connect (OSTI)

Vacuum distillation of chloride salts from plutonium oxide (PuO{sub 2}) and simulant PuO{sub 2} has been previously demonstrated at Department of Energy (DOE) sites using kilogram quantities of chloride salt. The apparatus for vacuum distillation contains a zone heated using a furnace and a zone actively cooled using either recirculated water or compressed air. During a vacuum distillation operation, a sample boat containing the feed material is placed into the apparatus while it is cool, and the system is sealed. The system is evacuated using a vacuum pump. Once a sufficient vacuum is attained, heating begins. Volatile salts distill from the heated zone to the cooled zone where they condense, leaving behind the non-volatile materials in the feed boat. The application of vacuum salt distillation (VSD) is of interest to the HB-Line Facility and the MOX Fuel Fabrication Facility (MFFF) at the Savannah River Site (SRS). Both facilities are involved in efforts to disposition excess fissile materials. Many of these materials contain chloride and fluoride salt concentrations which make them unsuitable for dissolution without prior removal of the chloride and fluoride salts. Between September 2009 and January 2011, the Savannah River National Laboratory (SRNL) and HB-Line designed, developed, tested, and successfully deployed a system for the distillation of chloride salts. Subsequent efforts are attempting to adapt the technology for the removal of fluoride. Fluoride salts of interest are less-volatile than the corresponding chloride salts. Consequently, an alternate approach is required for the removal of fluoride without significantly increasing the operating temperature. HB-Line Engineering requested SRNL to evaluate and demonstrate the feasibility of an alternate approach using both non-radioactive simulants and plutonium-bearing materials. Whereas the earlier developments targeted the removal of sodium chloride (NaCl) and potassium chloride (KCl), the current activities are concerned with the removal of the halide ions associated with plutonium trifluoride (PuF{sub 3}), plutonium tetrafluoride (PuF{sub 4}), calcium fluoride (CaF{sub 2}), and calcium chloride (CaCl{sub 2}). This report discusses non-radioactive testing of small-scale and pilot-scale systems and radioactive testing of a small-scale system. Experiments focused on demonstrating the chemistry for halide removal and addressing the primary engineering questions associated with a change in the process chemistry.

Pierce, R.; Pak, D.

2011-08-10T23:59:59.000Z

282

Future perspectives of using hollow fibers as structured packings in light hydrocarbon distillation  

SciTech Connect (OSTI)

Olefin and paraffin are the largest chemical commodities. Furthermore, they are major building blocks for the petrochemical industry. Each year, petroleum refining, consumes 4,500 TBtu/yr in separation energy, making it one of the most energy-intensive industries in the United States). Just considering liquefied petroleum gas (ethane/propane/butane) and olefins (ethylene and propylene) alone, the distillation energy consumption is about 400 TBtu/yr in the US. Since petroleum distillation is a mature technology, incremental improvements in column/tray design will only provide a few percent improvements in the performance. However, each percent saving in net energy use amounts to savings of 10 TBtu/yr and reduces CO{sub 2} emissions by 0.2 MTon/yr. In practice, distillation columns require 100 to 200 trays to achieve the desired separation. The height of a transfer unit (HTU) of conventional packings is typical in the range of 36-60 inch. Since 2006, we had explored using several non-selective membranes as the structured packings to replace the conventional packing materials used in propane and propylene distillation. We obtained the lowest HTU of < 8 inch for the hollow fiber column, which was >5 times shorter than that of the conventional packing materials. In 2008, we also investigated this type of packing materials in iso-/n-butane distillation. Because of a slightly larger relative volatility of iso-/n-butane than that of propane/propylene, a wider and a more stable operational range was obtained for the iso-/n-butane pair. However, all of the experiments were conducted on a small scale with flowrate of < 25 gram/min. Recently, we demonstrated this technology on a larger scale (<250 gram/min). Within the loading range of F-factor < 2.2 Pa{sup 0.5}, a pressure drop on the vapor side is below 50 mbar/m, which suggests that the pressure drop of hollow fibers packings is not an engineering barrier for the applications in distillations. The thermal stability study suggests that polypropylene hollow fibers are stable after a long time exposure to C{sub 2} - C{sub 4} mixtures. The effects of packing density on the separation efficiency will be discussed.

Yang, Dali [Los Alamos National Laboratory; Orler, Bruce [Los Alamos National Laboratory; Tornga, Stephanie [Los Alamos National Laboratory; Welch, Cindy [Los Alamos National Laboratory

2011-01-26T23:59:59.000Z

283

Interactive chemical effects and instability of shale derived middle distillate fuels  

SciTech Connect (OSTI)

This paper presents a study of instability of shale-derived fuels. Changes in fuel properties with time have been a continuing problem in the use of middle distillate fuels. The authors define instability as the formation of insoluble sediments and gums as well as the production of peroxides and color bodies. Nitrogen and sulfur heterocycles have long been implicated in fuel degradation, but present knowledge is limited regarding the chemistry of their autoxidation reactions in the complex fuel media. Based on the GC/MS identification of nitrogen heterocyclic constituents in several shale-derived middle distillate fuels, the authors have conducted gravimetric instability tests employing three model nitrogen heterocycles in shale-derived diesel fuels. Model sulfur compound dopant studies on shale-derived jet fuels were conducted by monitoring hydroperoxide formation/decomposition and the decreased quantity of sulfur compound. Potential interactive effects have been defined for these model dopants.

Mushrush, G.W.; Beal, E.J.; Watkins, J.M.; Morris, R.E.; Hardy, D.R. (Fuels Section, Naval Research Lab., Washington, DC (US))

1989-01-01T23:59:59.000Z

284

An evaluation of the potential end uses of a Utah tar sand bitumen. [Tar sand distillate  

SciTech Connect (OSTI)

To date the commercial application of tar sand deposits in the United States has been limited to their use as paving materials for county roads, parking lots, and driveways because the material, as obtained from the quarries, does not meet federal highway specifications. The bitumen in these deposits has also been the subject of upgrading and refining studies to produce transportation fuels, but the results have not been encouraging from an economic standpoint. The conversion of tar sand bitumen to transportation fuels cannot compete with crude oil refining. The purposes of this study were two-fold. The first was to produce vacuum distillation residues and determine if their properties met ASTM asphalt specifications. The second was to determine if the distillates could serve as potential feedstocks for the production of aviation turbine fuels. The bitumen used for this study was the oil produced during an in situ steamflood project at the Northwest Asphalt Ridge (Utah) tar sand deposit. Two distillation residues were produced, one at +316/sup 0/C and one at +399/sup 0/C. However, only the lower boiling residue met ASTM specifications, in this case as an AC-30 asphalt. The original oil sample met specifications as an AC-5 asphalt. These residue samples showed some unique properties in the area of aging; however, these properties need to be investigated further to determine the implications. It was also suggested that the low aging indexes and high flow properties of the asphalts may be beneficial for pavements that require good low-temperature performance. Two distillate samples were produced, one at IBP-316/sup 0/C and one at IBP-399/sup 0/C. The chemical and physical properties of these samples were determined, and it was concluded that both samples appear to be potential feedstocks for the production of aviation turbine fuels. However, hydrogenation studies need to be conducted and the properties of the finished fuels determined to verify the prediction. 14 refs., 12 tabs.

Thomas, K.P.; Harnsberger, P.M.; Guffey, F.D.

1986-09-01T23:59:59.000Z

285

The distribution of n-alkanes in partially frozen middle distillate fuels  

SciTech Connect (OSTI)

This work on partially frozen fuels is one of a continuing series of studies on the effect of composition on the freezing properties of hydrocarbon fuels. The method used for this purpose was reported previously. By means of this method the authors were able to determine the composition of the liquid and solid phases in partially frozen mixtures consisting of liquid and of solid crystals plus entrapped liquid. This paper presents the results of this study on five different middle distillate fuels.

Van Winkle, T.L.; Affens, W.A.; Beal, E.J.; Hazlett, R.N.; Guzman, J.

1986-04-01T23:59:59.000Z

286

ONE DAY ON SHAPE OPTIMIZATION  

E-Print Network [OSTI]

ONE DAY ON SHAPE OPTIMIZATION Tuesday November 17, 2009 Aula Buzano - Dipartimento di Matematica to "Shape Optimization", a very active research field which combines techniques from several areas of mathematics to set out and solve problems where the optimal shape of an object has to be determined, in order

Ceragioli, Francesca

287

Energy Savings Accomplished by Replacing Steam Ejectors with Electric Driven Vacuum Pumps in Crude Distillation Vacuum Towers  

E-Print Network [OSTI]

The low cost of steam combined with the maintenance free operation of steam ejectors has assured their unquestioned use in providing the necessary vacuum for crude distillation vacuum towers. However, the cost of steam production has risen...

Nelson, R. E.

1982-01-01T23:59:59.000Z

288

Hydrogenation of aromatics in synthetic crude distillates catalyzed by platinum supported in molecular sieves  

SciTech Connect (OSTI)

Catalytic hydrogenation of synthetic crude distillates from Canadian oil sands was carried out over platinum metal supported in pillared interlayered clay (PILC) and Y-zeolite. The molecular sieve supports were employed to modify the properties of dispersed platinum particles and improve their resistance to poisoning by sulfur. The objective was to reduce the distillate aromatic content to meet diesel emission control standards and cetane number requirements. Catalysts were prepared in a series of steps, and metal precursor was loaded using ion-exchange procedures. Characterization was done using X-ray diffraction, hydrogen chemisorption, and proton-induced X-ray emission elemental analysis. Catalytic hydrogenation reactions were carried out by processing distillate feedstocks both high (>100 ppm) and low (<10 ppm) in sulfur using a continuous-flow automated microreactor system. Experimental runs were performed to determine the reaction kinetics and Arrhenius parameters as a means of evaluating and comparing catalyst performance. Significant differences in catalyst activity were found. The Pt/Y-zeolite-alumina catalyst showed a much superior hydrogenation performance under conditions of high sulfur content. The extent of cracking and ring opening was also evaluated and was shown to be minimal under the operating conditions employed.

Kimbara, N.; Charland, J.P. [CANMET, Ottawa, Ontario (Canada)] [CANMET, Ottawa, Ontario (Canada); Wilson, M.F. [CANMET, Devon, Alberta (Canada)] [CANMET, Devon, Alberta (Canada)

1996-11-01T23:59:59.000Z

289

Magnetocaloric properties of distilled gadolinium: Effects of structural inhomogeneity and hydrogen impurity  

SciTech Connect (OSTI)

High-purity Gd prepared by distillation is a structurally inhomogeneous system consisting of needle-shaped crystals of cross section 0.5–2.5??m with near-c-axis orientation embedded in a matrix of nanosized (30–100?nm) grains. By measuring the magnetocaloric effect (MCE) directly, we find that the MCE values differ markedly for the plate-shaped samples cut out of a distillate along and perpendicular to the crystals. The effect of small controlled amounts of impurity (hydrogen) on the properties of distilled Gd is further studied. We observe opposite trends in the MCE response to hydrogen charging with respect to the crystal's orientation within the samples and discuss mechanisms interrelating the unique structural morphology with the impurity behavior. As an overall assessment, the Curie temperatures of ?-GdH{sub x} solid solutions increase from 291?K up to 294?K when increasing hydrogen concentration x from 0 to 0.15. Hydrogenation is found to broaden the ferromagnetic-to-paramagnetic phase transition. Hydrogen-containing specimens demonstrate reversibility of MCE at these temperatures.

Burkhanov, G. S.; Kolchugina, N. B.; Chzhan, V. B.; Chistyakov, O. D. [Baikov Institute of Metallurgy and Materials Science RAS, 119991 Moscow (Russian Federation); Tereshina, E. A. [Institute of Physics ASCR, 18221 Prague (Czech Republic); Tereshina, I. S. [Baikov Institute of Metallurgy and Materials Science RAS, 119991 Moscow (Russian Federation); International Laboratory of High Magnetic Fields and Low Temperatures PAS, 53-421 Wroclaw (Poland); Faculty of Physics, Lomonosov Moscow State University, 119991 Moscow (Russian Federation); Politova, G. A. [Baikov Institute of Metallurgy and Materials Science RAS, 119991 Moscow (Russian Federation); International Laboratory of High Magnetic Fields and Low Temperatures PAS, 53-421 Wroclaw (Poland); Badurski, D.; Drulis, H. [Institute of Low Temperature and Structure Research PAS, 50-950 Wroclaw (Poland); Paukov, M.; Havela, L. [Department of Condensed Matter Physics, Faculty of Mathematics and Physics, Charles University, 12116 Prague (Czech Republic)

2014-06-16T23:59:59.000Z

290

A novel proportional--integral-derivative control configuration with application to the control of batch distillation  

SciTech Connect (OSTI)

The aim of this paper is to propose a novel proportional-integral-derivative (PID) control configuration based on an observer structure. Batch distillation is used as the base case study where the regulated output is the distillate composition. The proposed PID control law is derived in the framework of robust nonlinear control with modeling error compensation techniques. A reduced-order observer is proposed to estimate both the derivative of the regulated output and the underlying modeling error. These observations are subsequently used in a control loop to feedback variations of distillate composition (derivative feedback) and to counteract the effects of modeling errors. It is shown that, under certain conditions, the resulting control law is equivalent to a classical PID controller with an antireset windup scheme. Moreover, the tuning of the controller is performed very easily in terms of a prescribed closed-loop time constant and an estimation time constant. Numerical results are provided for binary and multicomponent separations. Sampled/delayed measurements and several sources of uncertainties are considered in order to provide a realistic test scenario for the proposed control design procedure.

Alvarez-Ramirez, J.; Monroy-Loperena, R.; Cervantes, I.; Morales, A.

2000-02-01T23:59:59.000Z

291

Argonne's 2012 Earth Day Event  

SciTech Connect (OSTI)

Argonne's 2012 Earth Day event drew crowds from across the laboratory. Argonne and U.S. Department of Energy employees toured booths and interactive displays set up by Argonne programs and clubs. Several of Argonne's partners participated, including U.S. Department of Energy, University of Chicago, Abri Credit Union, DuPage County Forest Preserve, DuPage Water Commission, PACE and Morton Arboretum. Argonne scientists and engineers also participated in a poster session, discussing their clean energy research.

None

2012-01-01T23:59:59.000Z

292

Memorial Day | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department of EnergyDevelopmentTechnologies |Charles Page -to DOE re5,Memorial Day

293

Argonne's 2012 Earth Day Event  

ScienceCinema (OSTI)

Argonne's 2012 Earth Day event drew crowds from across the laboratory. Argonne and U.S. Department of Energy employees toured booths and interactive displays set up by Argonne programs and clubs. Several of Argonne's partners participated, including U.S. Department of Energy, University of Chicago, Abri Credit Union, DuPage County Forest Preserve, DuPage Water Commission, PACE and Morton Arboretum. Argonne scientists and engineers also participated in a poster session, discussing their clean energy research.

None

2013-04-19T23:59:59.000Z

294

Copolymers useful as additives for lowering the cloud point of middle hydrocarbon distillates, and compositions of middle hydrocarbon distillates comprising them  

SciTech Connect (OSTI)

Products useful as additives for lowering the cloud point of middle distillates have a molecular weight from 1,000 to 50,000, and are obtained by reacting a compound of the formula R-Z((CH/sub 2/) /SUB n/ NH) /SUB m/ H or HO-CH/sub 2/-R'-NH/sub 2/ where R is a monovalent saturated aliphatic radical of 1-30 carbon atoms, Z is -NH- or oxygen, n is 2 to 4, m is zero or 1 to 4 and R' is a saturated divalent aliphatic radical of 1-18 carbon atoms, with a copolymer comprising recurrent units (A) from an alkyl ester of an unsaturated monocarboxylic acid and/or a vinyl ester of a saturated monocarboxylic acid, recurrent units (B) from diisobutylene and recurrent units (C) from an unsaturated a,b-dicarboxylic compound.

Durand, J. P.; Damin, B.; Dawans, F.; Leger, R.

1985-03-05T23:59:59.000Z

295

Museum Day at Bradbury Science  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment SurfacesResource ProgramModificationEnzyme-Functionalized GoldMuonMuseum Day at

296

Celebrate Earth Day! | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Earth Day Celebrate Earth Day April 20, 2010 - 10:25am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory Earth Day is a great time to commit...

297

Vacuum Distillation  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember1. Foreign sales of uraniumE. GreatVENTURADay)

298

Joint Capability Technology Demonstration (JCTD) Industry Day...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Joint Capability Technology Demonstration (JCTD) Industry Day Agenda Agenda outlines the activities of the 2014...

299

,"U.S. Distillate Fuel Oil and Kerosene Sales by End Use"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: EnergyShale ProvedTexas"Brunei (Dollars perReserves (Billion Cubic Feet)"+ LeaseDistillate

300

Method and apparatus for assessing distillate-fuel stability by oxygen overpressure  

SciTech Connect (OSTI)

Reactions leading to insoluble sediments formation in distillate fuel are accelerated by forcing oxygen into solution in the fuel at pressures of between about 90 and 110 psig and then stressing the fuel under conditions of accelerated storage at temperatures of between about 40 C to 100 C. The method then makes use of gravimetric determination of the total insoubles formed. The stability of the fuel over a period of time as well as its comparitive stability to other fuels can then be predicted from the amount of insolubles formed. The method can be carried out by using a specialized pressure vessel.

Hardy, D.R.; Beal, E.J.; Burnett, J.C.

1989-06-27T23:59:59.000Z

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Earth Day 2012: A Day to Remember the Past and Shape the Future...  

Broader source: Energy.gov (indexed) [DOE]

Earth Day 2012: A Day to Remember the Past and Shape the Future Earth Day 2012: A Day to Remember the Past and Shape the Future April 26, 2012 - 10:10am Addthis Eric Barendsen...

302

Magic State Distillation and Gate Compilation in Quantum Algorithms for Quantum Chemistry  

E-Print Network [OSTI]

Quantum algorithms for quantum chemistry map the dynamics of electrons in a molecule to the dynamics of a coupled spin system. To reach chemical accuracy for interesting molecules, a large number of quantum gates must be applied which implies the need for quantum error correction and fault-tolerant quantum computation. Arbitrary fault-tolerant operations can be constructed from a small, universal set of fault-tolerant operations by gate compilation. Quantum chemistry algorithms are compiled by decomposing the dynamics of the coupled spin-system using a Trotter formula, synthesizing the decomposed dynamics using Clifford operations and single-qubit rotations, and finally approximating the single-qubit rotations by a sequence of fault-tolerant single-qubit gates. Certain fault-tolerant gates rely on the preparation of specific single-qubit states referred to as magic states. As a result, gate compilation and magic state distillation are critical for solving quantum chemistry problems on a quantum computer. We review recent progress that has improved the efficiency of gate compilation and magic state distillation by orders of magnitude.

Colin J. Trout; Kenneth R. Brown

2015-01-29T23:59:59.000Z

303

Magic State Distillation and Gate Compilation in Quantum Algorithms for Quantum Chemistry  

E-Print Network [OSTI]

Quantum algorithms for quantum chemistry map the dynamics of electrons in a molecule to the dynamics of a coupled spin system. To reach chemical accuracy for interesting molecules, a large number of quantum gates must be applied which implies the need for quantum error correction and fault-tolerant quantum computation. Arbitrary fault-tolerant operations can be constructed from a small, universal set of fault-tolerant operations by gate compilation. Quantum chemistry algorithms are compiled by decomposing the dynamics of the coupled spin-system using a Trotter formula, synthesizing the decomposed dynamics using Clifford operations and single-qubit rotations, and finally approximating the single-qubit rotations by a sequence of fault-tolerant single-qubit gates. Certain fault-tolerant gates rely on the preparation of specific single-qubit states referred to as magic states. As a result, gate compilation and magic state distillation are critical for solving quantum chemistry problems on a quantum computer. We review recent progress that has improved the efficiency of gate compilation and magic state distillation by orders of magnitude.

Colin J. Trout; Kenneth R. Brown

2015-01-07T23:59:59.000Z

304

Optimum Requirements for the Synthesis of Biodiesel Using Fatty Acid Distillates  

E-Print Network [OSTI]

The optimum requirements of temperature, retention time, mole ratio of reactants and catalyst for the direct synthesis of biodiesel from fatty acid distillates of palm kernel oil using tetraoxosulphate (VI) acid as catalyst was studied. The following parameters were used for the efficient and economic production of biodiesel: eight (8) moles of methanol per mole of fatty acid, 0.06 mole of tetraoxosulphate (VI) acid per mole of fatty acid, a retention time of sixty (60) minutes and reaction temperature of 65 OC. And this gave a maximum percentage yield of 98.4. Other parameters obtained include: an acid value of 0.1683 mg KOH/g, iodine value of 15.3549, flash point of 209 OC, viscosity of 3.7957 mm2s-1, density of 0.8776 g cm-3, water content of 400.05 mg kg-1, soap content of 2.30 mg/kg, and ester content of 98.804 %. From the obtained parameters, the biodiesel produced from fatty acid distillates of palm kernel oil reaches prescribed international standards for biodiesel production.

Akunna E. Ejele

305

Laser ultrasonic furnace tube coke monitor. Quarterly technical progress report. Report No. 5 for reporting period May 1, 1999 through August 1, 1999  

SciTech Connect (OSTI)

The overall aim of the project is to demonstrate the performance and practical use of a probe for measuring the thickness of coke deposits located within the high-temperature tubes of a thermal cracking furnace. The objective of work during this period was to enhance the sensitivity and signal-to-noise ratio of the probe measurement. Testing identified that the primary source of signal noise was traced to imperfections in the sacrificial stand-off, which was formed using a casting procedure. Laminations, voids, and impurities contained in the casting result in attenuation and dispersion of the ultrasonic signal. This report describes the work performed to optimize the signal conductance of the sacrificial stand-off.

NONE

1999-08-15T23:59:59.000Z

306

Experimental study of oil yields and properties of light and medium Venezuelan crude oils under steam and steam-propane distillation  

E-Print Network [OSTI]

Six experimental runs were carried out to study the yields for a light crude oil (34.2°API) and an intermediate crude oil (25.1°API) under steam distillation and steam-propane distillation. Yields, were measured at five temperatures, 110, 150, 200...

Plazas Garcia, Joyce Vivia

2002-01-01T23:59:59.000Z

307

Earth Day 2014 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

celebrating Earth Day all week long. It's Earth Week on Energy.gov We're focusing on climate change, highlighting Earth Day events and sharing ways Americans ActOnClimate --...

308

SHUTTLE MENU STS-135 Stow By Day  

E-Print Network [OSTI]

*Day 1 consists of Meal C only **Day 13 consists of Meals A & B only (B) - Beverage, (FF)- Fresh Food, (I) - Irradiated, (IM) - Intermediate Moisture, (NF) - Natural Form, (R) - Rehydratable, (T

309

IT Job Shadow Day | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

IT Job Shadow Day IT Job Shadow Day April 1, 2014 1:00PM to 4:00PM EDT Department of Energy, 1000 Independence Ave SW, Washington DC, Main Auditorium The Department of Energy's...

310

Theoretical Analysis of an Ideal Noiseless Linear Amplifier for Einstein-Podolsky-Rosen Entanglement Distillation  

E-Print Network [OSTI]

We study the operational regime of a noiseless linear amplifier based on quantum scissors that can nondeterministically amplify the one photon component of a quantum state with weak excitation. It has been shown that an arbitrarily large quantum state can be amplified by first splitting it into weak excitation states using a network of beamsplitters. The output states of the network can then be coherently recombined. In this paper, we analyse the performance of such a device for distilling entanglement after transmission through a lossy quantum channel, and look at two measures to determine the efficacy of the noiseless linear amplifier. The measures used are the amount of entanglement achievable and the final purity of the output amplified entangled state. We study the performances of both a single and a two-element noiseless linear amplifier for amplifying weakly excited states. Practically, we show that it may be advantageous to work with a limited number of stages.

J. Bernu; S. Armstrong; T. Symul; T. C. Ralph; P. K. Lam

2014-11-03T23:59:59.000Z

311

Upgrading of middle distillate fractions of syncrudes from athabasca oil sands  

SciTech Connect (OSTI)

Middle distillate fractions of syncrudes from Athabasca Oil Sands were evaluated for suitability as feedstocks in the catalytic conversion to diesel fuel meeting cetane number specifications. Hydrogenation of aromatic components to napthenes under severe conditions (380 to 400/sup 0/C, 2500 psig) using sulfided CoO/MoO/sub 3/ and NiO/WO/sub 3/ over ..cap alpha.. . Al/sub 2/O/sub 3/ in a previously described catalyst testing system. Reaction products were analyzed for aromatic carbon content using C/sup 13/ NMR spectroscopy and pseudo first order rate constants and activation energies (15.0 and 14.2 kcal 1 g-mole, respectively) were determined by regression analysis. At optimum conditions 97% aromatic conversion was obtained with the Ni-W catalyst. Product diesel fuel cetane number (42) was within specifications. Co-Mo catalyst was significantly less active.

Wilson, M.F.; Kriz, J.F.

1983-03-01T23:59:59.000Z

312

Dynamics and control of a heterogeneous azeotropic distillation column: Conventional control approach  

SciTech Connect (OSTI)

In this work, bifurcation analysis and dynamic simulation were used to investigate the optimum conventional control strategy of an isopropyl alcohol (IPA), cyclohexane (CyH), and water (H{sub 2}O) heterogeneous azeotropic column. Steady-state process analysis shows that the optimal operation point should be located at a critical reflux, a transition point at which the distillation path switches from a route that passes through the IPA + H{sub 2}O azeotrope to one that passes through the IPA + CyH azeotrope. A good control strategy must be able to maintain a steady column temperature profile that shows a plateau near 70 C to ensure passage around the IPA + CyH azeotrope. An inverse double-loop control strategy is proposed based on principal component analysis. This scheme is capable of maintaining the desired column temperature profile given all kinds of feed disturbances, thus keeping the product IPA purity at the desired level.

Chien, I.L. [National Taiwan Univ. of Science and Technology, Taipei (Taiwan, Province of China). Dept. of Chemical Engineering; Wang, C.J.; Wong, D.S.H. [National Tsing Hua Univ., Hsinchu (Taiwan, Province of China). Dept. of Chemical Engineering

1999-02-01T23:59:59.000Z

313

Re-refining of Waste Oil Solvent Is Used in Treatment/Distillation Process  

E-Print Network [OSTI]

INDUSTRIAL APPLICATION. A combination solvent treatment/distillation process has been designed for re-refining industrial waste oil (such as equipment lubricants, metal-working oil, and process oil) and used automotive lubricants (engine oil, hydraulic oil, and gear oil) for reuse. WASTE ENERGY RECOVERY. Recycling of waste oil in the United States has the potential to save the energy equivalent of 7-12 million bbl of crude oil annually.1 WASTE OIL RECOVERY. Prior to 1960, a significant portion of the demand for automotive lubricating oil was met by re-relined used oil. At the time, 150 re-refineries produced 300 million gal of motor oil annually. Since 1960, however, the production of re-refined oil has steadily declined. In 1981, for example, out of about 1.2 billion gal of automobile lubricating oil and 1.6 billion gal of industrial lubricating oils purchased, 25 U.S. rerefineries

unknown authors

314

On local indistinguishability of orthogonal pure states by using a bound on distillable entanglement  

E-Print Network [OSTI]

We show that the four states a|00>+b|11>, b^*|00>-a^*|11>, c|01>+d|10> and d^*|01>-c^*|10> cannot be discriminated with certainty if only local operations and classical communication (LOCC) are allowed and if only a single copy is provided, except in the case when they are simply |00>, |11>, |01> and |10> (in which case they are trivially distinguishable with LOCC). We go on to show that there exists a continuous range of values of a, b, c and d such that even three states among the above four are not locally distinguishable, if only a single copy is provided. The proof follows from the fact that logarithmic negativity is an upper bound of distillable entanglement.

Sibasish Ghosh; Guruprasad Kar; Anirban Roy; Debasis Sarkar; Aditi Sen De; Ujjwal Sen

2001-11-25T23:59:59.000Z

315

Why methyl tert-butyl ether production by reactive distillation may yield multiple solutions  

SciTech Connect (OSTI)

This paper presents an explanation of why methyl tert-butyl ether (MTBE) production by reactive distillation may yield multiple solutions. Widely different composition profiles and conversions may, as already reported by Krishna and others, results with identical column specifications, depending on the initial estimates provided. A hypothesis yielding a qualitative understanding of this phenomenon has been developed. The inert n-butene plays a key role in the proposed explanation: As the reaction mixture is diluted with n-butene, the activity coefficient of methanol increases substantially and the temperature decreases. This dilution has a profound effect on the equilibrium conversion, enabling MTBE to escape from the reactive zone without decomposition. When methanol is fed below or in the lower part of the reactive zone of the column, the ``lifting capacity`` of the minimum boiling point MTBE-methanol azeotrope will also be important.

Hauan, S.; Hertzberg, T.; Lien, K.M. [Univ. of Trondheim (Norway)

1995-03-01T23:59:59.000Z

316

Assigning a Value to Dried Distillers' Grains as a Protein Supplement in Cattle Consuming Low-Quality Forage  

E-Print Network [OSTI]

Cattle consuming low-quality forage may have decreased forage organic matter intake as a result of decreased nitrogen (N) intake. To date, a value has not been assigned to dried distillers' grains as a protein supplement to cattle consuming low...

Rambo, Zachary Joseph

2011-08-08T23:59:59.000Z

317

Kinetics of hydrogenation of aromatics determined by carbon-13 NMR for Athabasca bitumen-derived middle distillates  

SciTech Connect (OSTI)

High aromatics content in middle distillates is detrimental to fuel quality, as shown in such properties as smoke point of jet fuel and cetane number of diesel fuel. In the petroleum and petrochemical industries the yields from fluid catalytic cracking or steam cracking units are adversely affected by high aromatics content in the feedstock. Distillates obtained from oil sand bitumen, heavy oils, or coal liquefaction products are particularly high in aromatics. Reducing the concentration of this class of compounds is important. Aromatics hydrogenation (AHYD) is one option to achieve this result. In the current Syncrude operation a primary objective of hydrotreating is to reduce product sulfur and nitrogen contents; reducing aromatics content is an incidental result. However, the expansion plan currently under study by Syncrude includes further AHYD to improve cetane number. Predicting the product aromatics content is an important issue for this study. In the present study, hydrotreating of five Athabasca-bitumen-derived gas oils was conducted in pilot scale trickle-bed reactors using alumina-based commercial NiMo catalysts. Feedstocks originated from the distillation of virgin bitumen, and from distillates derived from treating bitumen in a fluid coker and hydrocracking pilot plant. Aromatics content was determined by the {sup 13}C NMR method. The previously developed rate equation for AHYD was modified by including power terms for space velocity and hydrogen partial pressure. The data were analyzed using the modified equation.

Yui, S.M.; Sanford, E.C. (Syncrude Canada Ltd., Edmonton, Alberta (Canada))

1987-04-01T23:59:59.000Z

318

ScheduleDay 1: Molecular Evolution Introduction  

E-Print Network [OSTI]

-Cantor Model Do Exercise Read Ponting, study slides from day 3 and find questions. Day 3: Comparative Genomics Lecture: Comparative Genomics Prepare Projects Practical: Models of Sequence Evolution Read HSW1, study questions. Day 10: Projects Project 1 ­ Population Genomics: Selective Sweeps Project 2 ­ Molecular

Goldschmidt, Christina

319

Business Day Authoritative, informative and timely,  

E-Print Network [OSTI]

Overview #12;Business Day Overview Authoritative, informative and timely, Business Day is a must read for business decision-makers. Business Day has Australia's most influential business writers and commentators who provide up-to-the- minute business news, including context, background and specialist analysis

Peters, Richard

320

2014 Earth Day Photo Contest Winners  

Energy Savers [EERE]

2014 Earth Day Photo Contest Winners COMMUNITY: "Edison Home" by Gary Hartman SUSTAINABILITY: "Oak Alley" by Wade Sickinger ALTERNATIVE ENERGY: "Windmill Ablaze at Sunset" by Leroy...

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Innovative Manufacturing Initiative Recognition Day, Advanced...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Publications Innovative Manufacturing Initiative Recognition Day Advanced Manufacturing Office Overview Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry...

322

Green Clean Day Planning Guide A practical guide for creating a successful Green Clean Day  

E-Print Network [OSTI]

Green Clean Day Planning Guide A practical guide for creating a successful Green Clean Day A publication of U of M Waste Management Services July 2013 #12;Table of Contents What is a Green Clean Day? 2 Why have a Green Clean Day? 2 How Do We Get Started? 2 How Waste Management Services Can Help 2

Awtar, Shorya

323

Agent Notes Day 4 ~ Health Training  

E-Print Network [OSTI]

­ Agent Notes Day 4 ~ Health Training In preparation for the Health Day, you could order the National Institute on Aging, National Institutes of Health. To order these free booklets, go to www in the afternoon, and edit your agenda to reflect your choices. Several HealthHints newsletters are referenced

324

Day of Concern Collection / Ture Erickson (collector)  

E-Print Network [OSTI]

Day of Concern Collection / Ture Erickson (collector) Last revised October 2011 University;Collection Description Day of Concern collection / Ture Erickson (collector). ­ 1984. 6.5 cm of textual records. Collector's Biographical Sketch Born in New Westminster, Ture Erickson became Head of Sedgewick

Handy, Todd C.

325

Microwave pyrolysis of distillers dried grain with solubles (DDGS) for biofuel production  

SciTech Connect (OSTI)

Microwave pyrolysis of distillers dried grain with solubles (DDGS) was investigated to determine the effects of pyrolytic conditions on the yields of bio-oil, syngas, and biochar. Pyrolysis process variables included reaction temperature, time, and power input. Microwave pyrolysis of DDGS was analyzed using response surface methodology to ?nd out the effect of process variables on the biofuel (bio-oil and syn- gas) conversion yield and establish prediction models. Bio-oil recovery was in the range of 26.5–50.3 wt.% of the biomass. Biochar yields were 23.5–62.2% depending on the pyrolysis conditions. The energy con- tent of DDGS bio-oils was 28 MJ/kg obtained at the 650 oC and 8 min, which was about 66.7% of the heat- ing value of gasoline. GC/MS analysis indicated that the biooil contained a series of important and useful chemical compounds: aliphatic and aromatic hydrocarbons. At least 13% of DDGS bio-oil was the same hydrocarbon compounds found in regular unleaded gasoline.

Lei, Hanwu; Ren, Shoujie; Wang, Lu; Bu, Quan; Julson, James; Holladay, Johnathan E.; Ruan, Roger

2011-05-01T23:59:59.000Z

326

Recovery of Navy distillate fuel from reclaimed product. Volume II. Literature review  

SciTech Connect (OSTI)

In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). This first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in which experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 references and abstracts. This appendix, because of its volume, has been published separately as Volume 2.

Brinkman, D.W.; Whisman, M.L.

1984-11-01T23:59:59.000Z

327

Recovery of Navy distillate fuel from reclaimed product. Volume I. Technical discussion  

SciTech Connect (OSTI)

In an effort to assist the Navy to better utilize its waste hydrocarbons, NIPER, with support from the US Department of Energy, is conducting research designed to ultimately develop a practical technique for converting Reclaimed Product (RP) into specification Naval Distillate Fuel (F-76). The first phase of the project was focused on reviewing the literature and available information from equipment manufacturers. The literature survey has been carefully culled for methodology applicable to the conversion of RP into diesel fuel suitable for Navy use. Based upon the results of this study, a second phase has been developed and outlined in which experiments will be performed to determine the most practical recycling technologies. It is realized that the final selection of one particular technology may be site-specific due to vast differences in RP volume and available facilities. A final phase, if funded, would involve full-scale testing of one of the recommended techniques at a refueling depot. The Phase I investigations are published in two volumes. Volume 1, Technical Discussion, includes the narrative and Appendices I and II. Appendix III, a detailed Literature Review, includes both a narrative portion and an annotated bibliography containing about 800 referenvces and abstracts. This appendix, because of its volume, has been published separately as Volume 2. 18 figures, 4 tables.

Brinkman, D.W.; Whisman, M.L.

1984-11-01T23:59:59.000Z

328

Proceedings of Hydrology Days 2002, Pages 56 63, April 1 4, 2002 Hydrology Days 2002  

E-Print Network [OSTI]

Proceedings of Hydrology Days 2002, Pages 56 ­ 63, April 1 ­ 4, 2002 Hydrology Days 2002 Real radiography can be used for quantitative imaging of hydrologic phenomena at video frame rates, with great

Deinert, Mark

329

Inter-Agency Holocaust Remberance Day  

Broader source: Energy.gov [DOE]

The ‘Days of Remembrance’ honors the six million Jews who were murdered during the Holocaust, and the five million other victims including Soviet prisoners of war, Polish Christians, physically and...

330

Days on market and home sales  

E-Print Network [OSTI]

In 2006, Massachusetts adopted a new policy that prohibits home sellers from resetting their properties’ days on market through relisting. Massachusetts homes exposed to the policy change experienced a $16,000 reduction ...

Tucker, Catherine Elizabeth

331

30-Day Federal Register Notice - Proposed  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Revised 11-2009 30-Day Federal Register Notice - Proposed 6450-01-P DEPARTMENT OF ENERGY Proposed Agency Information Collection AGENCY: U.S. Department of Energy. ACTION: Notice...

332

Day-ying butter ies remain day-ying in a Polynesian, bat-free habitat  

E-Print Network [OSTI]

Day- ying butter ies remain day- ying in a Polynesian, bat-free habitat James H. Fullard Department to study the e¡ects of predators on £ight activity. One major characteristic of day-£ying butter

Fullard, James H.

333

Update of distillers grains displacement ratios for corn ethanol life-cycle analysis.  

SciTech Connect (OSTI)

Production of corn-based ethanol (either by wet milling or by dry milling) yields the following coproducts: distillers grains with solubles (DGS), corn gluten meal (CGM), corn gluten feed (CGF), and corn oil. Of these coproducts, all except corn oil can replace conventional animal feeds, such as corn, soybean meal, and urea. Displacement ratios of corn-ethanol coproducts including DGS, CGM, and CGF were last updated in 1998 at a workshop at Argonne National Laboratory on the basis of input from a group of experts on animal feeds, including Prof. Klopfenstein (University of Nebraska, Lincoln), Prof. Berger (University of Illinois, Urbana-Champaign), Mr. Madson (Rapheal Katzen International Associates, Inc.), and Prof. Trenkle (Iowa State University) (Wang 1999). Table 1 presents current dry milling coproduct displacement ratios being used in the GREET model. The current effort focuses on updating displacement ratios of dry milling corn-ethanol coproducts used in the animal feed industry. Because of the increased availability and use of these coproducts as animal feeds, more information is available on how these coproducts replace conventional animal feeds. To glean this information, it is also important to understand how industry selects feed. Because of the wide variety of available feeds, animal nutritionists use commercial software (such as Brill Formulation{trademark}) for feed formulation. The software recommends feed for the animal on the basis of the nutritional characteristics, availability, and price of various animal feeds, as well as on the nutritional requirements of the animal (Corn Refiners Association 2006). Therefore, feed formulation considers both the economic and the nutritional characteristics of feed products.

Arora, S.; Wu, M.; Wang, M.; Energy Systems

2011-02-01T23:59:59.000Z

334

Celebrating Pi Day | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Day with Secretary Chu CelebratePi Day Celebrating Pi

335

Analysis of Oxygenated Compounds in Hydrotreated Biomass Fast Pyrolysis Oil Distillate Fractions  

SciTech Connect (OSTI)

Three hydrotreated bio-oils with different oxygen contents (8.2, 4.9, and 0.4 w/w) were distilled to produce Light, Naphtha, Jet, Diesel, and Gasoil boiling range fractions that were characterized for oxygen containing species by a variety of analytical methods. The bio-oils were originally generated from lignocellulosic biomass in an entrained-flow fast pyrolysis reactor. Analyses included elemental composition, carbon type distribution by {sup 13}C NMR, acid number, GC-MS, volatile organic acids by LC, and carbonyl compounds by DNPH derivatization and LC. Acid number titrations employed an improved titrant-electrode combination with faster response that allowed detection of multiple endpoints in many samples and for acid values attributable to carboxylic acids and to phenols to be distinguished. Results of these analyses showed that the highest oxygen content bio-oil fractions contained oxygen as carboxylic acids, carbonyls, aryl ethers, phenols, and alcohols. Carboxylic acids and carbonyl compounds detected in this sample were concentrated in the Light, Naphtha, and Jet fractions (<260 C boiling point). Carboxylic acid content of all of the high oxygen content fractions was likely too high for these materials to be considered as fuel blendstocks although potential for blending with crude oil or refinery intermediate streams may exist for the Diesel and Gasoil fractions. The 4.9 % oxygen sample contained almost exclusively phenolic compounds found to be present throughout the boiling range of this sample, but imparting measurable acidity primarily in the Light, Naphtha and Jet fractions. Additional study is required to understand what levels of the weakly acidic phenols could be tolerated in a refinery feedstock. The Diesel and Gasoil fractions from this upgraded oil had low acidity but still contained 3 to 4 wt% oxygen present as phenols that could not be specifically identified. These materials appear to have excellent potential as refinery feedstocks and some potential for blending into finished fuels. Fractions from the lowest oxygen content oil exhibited some phenolic acidity, but generally contained very low levels of oxygen functional groups. These materials would likely be suitable as refinery feedstocks and potentially as fuel blend components. PIONA analysis of the Light and Naphtha fractions shows benzene content of 0.5 and 0.4 vol%, and predicted (RON + MON)/2 of 63 and 70, respectively.

Christensen, Earl D.; Chupka, Gina; Luecke, Jon; Smurthwaite, Tricia D.; Alleman, Teresa L.; Iisa, Kristiina; Franz, James A.; Elliott, Douglas C.; McCormick, Robert L.

2011-10-06T23:59:59.000Z

336

FOREST HEALTH DAY Thursday 20 September 2012  

E-Print Network [OSTI]

Sarah Green, Forest Research 1130 - Comfort break (Tea/Coffee) 1145 - Insect pests of trees in Scotland 272440 There will be no charge for this event. Tea, coffee and a light lunch will be provided and disease issues in the field. #12;FOREST HEALTH DAY 0930 - Registration, tea/coffee 1000 - Welcome

337

One day seminar: Genetics and Genomics of  

E-Print Network [OSTI]

SCHOOL OF MEDICINE One day seminar: Genetics and Genomics of Infectious Diseases Malaria and TB 14th June 2013 University of St Andrews - School of Medicine Pathogen genome research allows exquisite to understanding disease progression. Pathogen genome sequencing is accessible to most. Outputs have broad

Brierley, Andrew

338

Checklist 2 The first days in Germany  

E-Print Network [OSTI]

Checklist 2 The first days in Germany Further information and explanations for the following points (former E111 or E128) or EHIC-Card to one of the social insurers in Germany. You will then be issued in Germany! Only when you have a permanent address you can register with the Citizens' Bureau (Bürgerbüro

Kemper, Gregor

339

John Day Tailrace MASS2 Hydraulic Modeling  

SciTech Connect (OSTI)

Recent biological results for the Juvenile Bypass System at John Jay Lock and Dam have raised concerns about the hydraulic conditions that are created in the tailrace under different project operations. This Memorandum for Record discusses the development and application of a truncated MASS2 model in the John Day tailrace.

Rakowski, Cynthia L.; Richmond, Marshall C.

2003-06-03T23:59:59.000Z

340

Political Campaigning and Other Non-University Events on Game Days or Major Event Days  

E-Print Network [OSTI]

Political Campaigning and Other Non-University Events on Game Days or Major Event Days This Policy of this is the prohibition of any political signage implanted in, posted on, or otherwise affixed to University property in the political process, subject to other governing policies and procedures. Students: http

Oklahoma, University of

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

NOAA's Arctic Science Days Day 1: Science, Weather and Sea Ice, and International Partnerships  

E-Print Network [OSTI]

NOAA's Arctic Science Days 1 Day 1: Science, Weather and Sea Ice, and International Partnerships 1 Observing Networks [IASOA, RUSALCA, PAG, CBMP & SAON] 2. Ed Farley (NOAA/AFSC, remote): Implications of sea ice loss on NOAA trust resources: NOAA's Loss of Sea Ice (LOSI) Program 3. Sue Moore (NOAA

342

Two-stage hydrotreating of a bitumen-derived middle distillate to produce diesel and jet fuels, and kinetics of aromatics hydrogenation  

SciTech Connect (OSTI)

The middle distillate from a synthetic crude oil derived from Athabasca bitumen was further hydrotreated in a downflow pilot unit over a typical NiMo catalyst at 330 to 400 C, 7 to 11 MPa and 0.63 to 1.39 h{sup {minus}1} LHSV. Feed and liquid products were characterized for aromatics, cetane index (CI) and other diesel specification items. Aromatics were determined by a supercritical fluid chromatography method, while CI was determined using the correlation developed at Syncrude Canada Ltd. Also feed and selected products were distilled into a jet fuel cut (150/260 C) by spinning band distillation for the determination of smoke point and other jet fuel specification items. A good relationship between aromatics content and CI was obtained. Kinetics of aromatics hydrogenation were investigated, employing a simple-first order reversible reaction model.

Yui, S.M. [Syncrude Canada Ltd., Edmonton, Alberta (Canada)

1994-12-31T23:59:59.000Z

343

DOE at Day One | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless orAChiefAppropriation FYGStrategic HumanDOEWellsofat Day

344

DayStar Technologies | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORT Americium/CuriumSunwaysDatang Chifeng Saihanba Wind PowerDayStar

345

What is a High Electric Demand Day?  

Broader source: Energy.gov [DOE]

This presentation by T. McNevin of the New Jersey Bureau of Air Quality Planning was part of the July 2008 Webcast sponsored by the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Weatherization and Intergovernmental Program Clean Energy and Air Quality Integration Initiative that was titled Role of Energy Efficiency and Renewable Energy in Improving Air Quality and Addressing Greenhouse Gas Reduction Goals on High Electric Demand Days.

346

Coking Coal Import Costs - EIA  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOil andMCKEESPORTfor the

347

Waste Heat Recovery and Recycling in Thermal Separation Processes: Distillation, Multi-Effect Evaporation (MEE) and Crystallization Processes  

SciTech Connect (OSTI)

Evaporation and crystallization are key thermal separation processes for concentrating and purifying inorganic and organic products with energy consumption over 1,000 trillion Btu/yr. This project focused on a challenging task of recovering low-temperature latent heat that can have a paradigm shift in the way thermal process units will be designed and operated to achieve high-energy efficiency and significantly reduce the carbon footprint as well as water footprint. Moreover, this project has evaluated the technical merits of waste-heat powered thermal heat pumps for recovery of latent heat from distillation, multi-effect evaporation (MEE), and crystallization processes and recycling into the process. The Project Team has estimated the potential energy, economics and environmental benefits with the focus on reduction in CO2 emissions that can be realized by 2020, assuming successful development and commercialization of the technology being developed. Specifically, with aggressive industry-wide applications of heat recovery and recycling with absorption heat pumps, energy savings of about 26.7 trillion Btu/yr have been estimated for distillation process. The direct environmental benefits of this project are the reduced emissions of combustible products. The estimated major reduction in environmental pollutants in the distillation processes is in CO2 emission equivalent to 3.5 billion lbs/year. Energy consumption associated with water supply and treatments can vary between 1,900 kWh and 23,700 kWh per million-gallon water depending on sources of natural waters [US DOE, 2006]. Successful implementation of this technology would significantly reduce the demand for cooling-tower waters, and thereby the use and discharge of water treatment chemicals. The Project Team has also identified and characterized working fluid pairs for the moderate-temperature heat pump. For an MEE process, the two promising fluids are LiNO3+KNO3+NANO3 (53:28:19 ) and LiNO3+KNO3+NANO2(53:35:12). And for an H2O2 distillation process, the two promising fluids are Trifluoroethanol (TFE) + Triethylene Glycol Dimethyl ether (DMETEG) and Ammonia+ Water. Thermo-physical properties calculated by Aspen+ are reasonably accurate. Documentation of the installation of pilot-plants or full commercial units were not found in the literature for validating thermo-physical properties in an operating unit. Therefore, it is essential to install a pilot-scale unit to verify thermo-physical properties of working fluid pairs and validate the overall efficiency of the thermal heat pump at temperatures typical of distillation processes. For an HO2 process, the ammonia-water heat pump system is more compact and preferable than the TFE-DMETEG heat pump. The ammonia-water heat pump is therefore recommended for the H2O2 process. Based on the complex nature of the heat recovery system, we anticipated that capital costs could make investments financially unattractive where steam costs are low, especially where co-generation is involved. We believe that the enhanced heat transfer equipment has the potential to significantly improve the performance of TEE crystallizers, independent of the absorption heat-pump recovery system. Where steam costs are high, more detailed design/cost engineering will be required to verify the economic viability of the technology. Due to the long payback period estimated for the TEE open system, further studies on the TEE system are not warranted unless there are significant future improvements to heat pump technology. For the H2O2 distillation cycle heat pump waste heat recovery system, there were no significant process constraints and the estimated 5 years payback period is encouraging. We therefore recommend further developments of application of the thermal heat pump in the H2O2 distillation process with the focus on the technical and economic viability of heat exchangers equipped with the state-of-the-art enhancements. This will require additional funding for a prototype unit to validate enhanced thermal performances of heat transfer equipment, evaluat

Emmanuel A. Dada; Chandrakant B. Panchal; Luke K. Achenie; Aaron Reichl; Chris C. Thomas

2012-12-03T23:59:59.000Z

348

Day, Wisconsin: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump to:52c8ff988c1 No38e4011f618b No revision hasDawesCounty isDay, Wisconsin:

349

Earth Day Coalition | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump37. It is classified asThis article is a stub. You canAdvantage JumpDay

350

2014 Earth Day | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICS H.Carbon Storage R&D ProjectEarth Day

351

30-Day Federal Register Notice - Proposed  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste and Materials2014 Chief Freedom ofDepartmentto Texas, Missouri and30-Day

352

National Lab Day - Open House | Jefferson Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andData andFleetEngineeringAnnual ReportNational Lab Day - Open House

353

SunDay | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty LtdSteen, Minnesota:36052°, -97.6114217° LoadingEnergy GroupSunConnexSunDay

354

Volunteer Day | Y-12 National Security Complex  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies | Blandine Jerome VelenciaNews CareersStand by:Volunteer Day

355

Distillation of Bose-Einstein Condensates in a Double-Well Potential Y. Shin, M. Saba, A. Schirotzek, T. A. Pasquini, A. E. Leanhardt, D. E. Pritchard, and W. Ketterle*  

E-Print Network [OSTI]

Distillation of Bose-Einstein Condensates in a Double-Well Potential Y. Shin, M. Saba, A-Einstein condensates of sodium atoms, prepared in an optical dipole trap, were distilled into a second empty dipole the potential barrier separating the two wells and then forming a new condensate. This process serves as a model

356

A characterization and evaluation of coal liquefaction process streams. The kinetics of coal liquefaction distillation resid conversion  

SciTech Connect (OSTI)

Under subcontract from CONSOL Inc., the University of Delaware studied the mechanism and kinetics of coal liquefaction resid conversion. The program at Delaware was conducted between August 15, 1994, and April 30, 1997. It consisted of two primary tasks. The first task was to develop an empirical test to measure the reactivity toward hydrocracking of coal-derived distillation resids. The second task was to formulate a computer model to represent the structure of the resids and a kinetic and mechanistic model of resid reactivity based on the structural representations. An introduction and Summary of the project authored by CONSOL and a report of the program findings authored by the University of Delaware researchers are presented here.

Klein, M.T.; Calkins, W.H.; Huang, H.; Wang, S.; Campbell, D.

1998-03-01T23:59:59.000Z

357

Secretary Moniz Warms Up For Earth Day Pitch | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Warms Up For Earth Day Pitch Secretary Moniz Warms Up For Earth Day Pitch Addthis Speakers Secretary Ernest Moniz Duration :32...

358

Preindustrial to present-day changes in tropospheric hydroxyl...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Room, GFDL Preindustrial to present-day changes in tropospheric hydroxyl radical and methane lifetime from the ACCMIP Vaishali Naik GFDL Preindustrial to present-day changes in...

359

T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server  

Broader source: Energy.gov [DOE]

BlackBerry advisory describes a security issue that the BlackBerry Attachment Service component of the BlackBerry Enterprise Server is susceptible to. The issue relates to a known vulnerability in the PDF distiller component of the BlackBerry Attachment Service that affects how the BlackBerry Attachment Service processes PDF files.

360

Distillation of Bose-Einstein condensates in a double-well potential The characteristic feature of Bose-Einstein condensation is the accumulation of a  

E-Print Network [OSTI]

Distillation of Bose-Einstein condensates in a double-well potential The characteristic feature of Bose-Einstein condensation is the accumulation of a macroscopic number of particles in the lowest quantum state. Condensate fragmentation, the macroscopic occupation of two or more quantum states

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Generalized computer-assisted operations; A comprehensive system for day-to-day oilfield operations  

SciTech Connect (OSTI)

This paper reports that Shell Oil Co. and a U.S. subsidiary, Shell Western E and P Inc., developed a comprehensive, generalized, computer-assisted-operations (CAO) system for day-to-day oilfield operations. The system addresses many of the daily operating needs of data acquisition, well and facility monitoring and control, problem detection and diagnosis, design and/or redesign of artificial-lift systems, and oilfield data management. It is generalized in that one system, with common computer hardware, software, and techniques, serves several different oil fields with diverse operating requirements and conditions.

Dunham, C.L.; Anderson, S.R. (Shell Oil Co. (US))

1991-03-01T23:59:59.000Z

362

Distillation 29 Chem 355 Jasperse DISTILLATION  

E-Print Network [OSTI]

vaporize. The vapors produced are subsequently passed through a water-cooled condenser. Upon cooling liquid doesn't change, only the rate of vaporization. The energy supplied by heating is used

Jasperse, Craig P.

363

Single-Step Syngas-to-Distillates (S2D) Synthesis via Methanol and Dimethyl Ether Intermediates: Final Report  

SciTech Connect (OSTI)

The objective of the work was to enhance price-competitive, synthesis gas (syngas)-based production of transportation fuels that are directly compatible with the existing vehicle fleet (i.e., vehicles fueled by gasoline, diesel, jet fuel, etc.). To accomplish this, modifications to the traditional methanol-to-gasoline (MTG) process were investigated. In this study, we investigated direct conversion of syngas to distillates using methanol and dimethyl ether intermediates. For this application, a Pd/ZnO/Al2O3 (PdZnAl) catalyst previously developed for methanol steam reforming was evaluated. The PdZnAl catalyst was shown to be far superior to a conventional copper-based methanol catalyst when operated at relatively high temperatures (i.e., >300°C), which is necessary for MTG-type applications. Catalytic performance was evaluated through parametric studies. Process conditions such as temperature, pressure, gas-hour-space velocity, and syngas feed ratio (i.e., hydrogen:carbon monoxide) were investigated. PdZnAl catalyst formulation also was optimized to maximize conversion and selectivity to methanol and dimethyl ether while suppressing methane formation. Thus, a PdZn/Al2O3 catalyst optimized for methanol and dimethyl ether formation was developed through combined catalytic material and process parameter exploration. However, even after compositional optimization, a significant amount of undesirable carbon dioxide was produced (formed via the water-gas-shift reaction), and some degree of methane formation could not be completely avoided. Pd/ZnO/Al2O3 used in combination with ZSM-5 was investigated for direct syngas-to-distillates conversion. High conversion was achieved as thermodynamic constraints are alleviated when methanol and dimethyl are intermediates for hydrocarbon formation. When methanol and/or dimethyl ether are products formed separately, equilibrium restrictions occur. Thermodynamic relaxation also enables the use of lower operating pressures than what would be allowed for methanol synthesis alone. Aromatic-rich hydrocarbon liquid (C5+), containing a significant amount of methylated benzenes, was produced under these conditions. However, selectivity control to liquid hydrocarbons was difficult to achieve. Carbon dioxide and methane formation was problematic. Furthermore, saturation of the olefinic intermediates formed in the zeolite, and necessary for gasoline production, occurred over PdZnAl. Thus, yield to desirable hydrocarbon liquid product was limited. Evaluation of other oxygenate-producing catalysts could possibly lead to future advances. Potential exists with discovery of other types of catalysts that suppress carbon dioxide and light hydrocarbon formation. Comparative techno-economics for a single-step syngas-to-distillates process and a more conventional MTG-type process were investigated. Results suggest operating and capital cost savings could only modestly be achieved, given future improvements to catalyst performance. Sensitivity analysis indicated that increased single-pass yield to hydrocarbon liquid is a primary need for this process to achieve cost competiveness.

Dagle, Robert A.; Lebarbier, Vanessa MC; Lizarazo Adarme, Jair A.; King, David L.; Zhu, Yunhua; Gray, Michel J.; Jones, Susanne B.; Biddy, Mary J.; Hallen, Richard T.; Wang, Yong; White, James F.; Holladay, Johnathan E.; Palo, Daniel R.

2013-11-26T23:59:59.000Z

364

Distribution of higher n-alkanes in partially frozen middle-distillate fuels. Final report, October 1982-September 1984  

SciTech Connect (OSTI)

In conjunction with continuing studies on the effect of composition on the freezing points of middle distillate fuels, attention was directed to partially frozen fuels. The crystals and residual liquid from partially frozen JP-5 and DFM fuel samples derived from both petroleum and shale were separated from each other and collected by means of the NRL liquid-solid separator apparatus (LSS) at several temperatures below the freezing points of the original samples. The original fuel samples, the solid material (precipitate), and liquid (filtrate) were characterized by gas chromatography (GC). The filtrate data were straightforward. As expected, Van't Hoff plot of the n-alkanes concentrations (log concentrations vs reciprocal absolute temperature) formed straight lines, and their slopes demonstrated the importance of the higher n-alkanes in fuel crystallization at cold temperatures. The precipitate data presented some problems of interpretation since it was observed that the waxy crystal precipitate matrix entrapped significant amounts of liquid (filtrate). The data on solid which were obtained by these methods demonstrated that the higher n-alkanes play the key role in fuel crystallization at low temperatures, concentrating as much as tenfold in the crystallized solids compared to the liquid. Also, it was clearly shown that the n-alkanes form the major part, up to least 95% by weight in some fuels, of the solid crystals formed.

Van Winkle, T.L.; Affens, W.A.; Beal, E.J.; Hazlett, R.N.; DeGuzman, J.

1985-04-10T23:59:59.000Z

365

Energy Department's Race to 7-Day Solar Prize Competition to...  

Office of Environmental Management (EM)

Race to 7-Day Solar Prize Competition to Speed Solar Deployment Energy Department's Race to 7-Day Solar Prize Competition to Speed Solar Deployment March 4, 2015 - 2:48pm Addthis...

366

DOE Headquarters Earth Day 2014 | Department of Energy  

Office of Environmental Management (EM)

DOE Headquarters Earth Day 2014 DOE Headquarters Earth Day 2014 earthday2011lg.png Save the Date - April 22, 2014 April 22, 2014, is the 44th anniversary of the founding of Earth...

367

Processing Transactions that have Exceeded the 90-day Guideline  

E-Print Network [OSTI]

journal. It appears when correcting a journal that posted over 90-days ago or when recording a sale more than 90 days after the actual date of sale. Step 1: Access the 90-day form When a 90-day form to ASRSP at (847) 467-2557 in EV or (312) 503-0873 in CH. If you do not have a fax machine, you may send

Shull, Kenneth R.

368

China, March 2005 DAY 1: FLYING TO MUNICH & SHANGHAI  

E-Print Network [OSTI]

China, March 2005 DAY 1: FLYING TO MUNICH & SHANGHAI March 12. Saturday Waking up time: 8.30 am. I, lived one year in Beijing and told me lots of stuff about China, where to go, what to do, how in Namibia at Christmas, making me extremely jealous. DAY 2: FIRST DAY IN SHANGHAI, CHINA March 13. Sunday

California at Santa Cruz, University of

369

14UO TANK,OPENING REPORT NO.5. October 20th -November 26th (37 days total; 27 working days).  

E-Print Network [OSTI]

14UO TANK,OPENING REPORT NO.5. October 20th - November 26th (37 days total; 27 working days). Since the tank was last closed the accelerator ran for 97 days.until this opening which was scheduled to replace was done during the tank-open period. We believe that there would be value in gIvIng our assessments

Chen, Ying

370

Day-Ahead premiums on the Midwest ISO  

SciTech Connect (OSTI)

An examination of day-ahead premiums for the Midwest ISO from September 2005 to December 2007 reveals that premiums are positive and statistically significant across all five hubs, indicating inefficiency in the Midwest wholesale electricity market. Further, day-ahead premiums exhibit monthly seasonal variation with some indication of the day-ahead premiums declining over time in three of the five hubs. (author)

Bowden, Nicholas; Hu, Su; Payne, James

2009-03-15T23:59:59.000Z

371

Argonne Celebrates Earth Day 2013: It's Easy Being Green  

SciTech Connect (OSTI)

Argonne's April 23, 2013 Earth Day celebration featured "green" R&D conducted at the lab and interactive displays and fun activities that engage the laboratory community.

Paul Kearns; Pam Sydelko; Ray Bair; Stephen Streiffer; Brian Stephenson

2013-04-17T23:59:59.000Z

372

Optimization Online - Optimal Job Scheduling with Day-ahead Price ...  

E-Print Network [OSTI]

Aug 17, 2011 ... Optimal Job Scheduling with Day-ahead Price and Random Local Distributed Generation: A Two-stage Robust Approach.

Anna Danandeh

2011-08-17T23:59:59.000Z

373

2014 Advanced Grid Modeling Peer Review Presentations - Day One...  

Broader source: Energy.gov (indexed) [DOE]

Morning Session 2014 Advanced Grid Modeling Peer Review Presentations - Day One Morning Session The Office of Electricity Delivery and Energy Reliability held a peer review of the...

374

Argonne Celebrates Earth Day 2013: It's Easy Being Green  

ScienceCinema (OSTI)

Argonne's April 23, 2013 Earth Day celebration featured "green" R&D conducted at the lab and interactive displays and fun activities that engage the laboratory community.

Paul Kearns; Pam Sydelko; Ray Bair; Stephen Streiffer; Brian Stephenson;

2013-06-10T23:59:59.000Z

375

2012 Smart Grid Peer Review Presentations - Day 1 Afternoon Session...  

Broader source: Energy.gov (indexed) [DOE]

from Day 1 afternoon sessions are below. Moderators: Eric Lightner and Merrill Smith 2012 SG Peer Review - GridWise Architecture Council - Ron Melton, PNNL 2012 SG Peer...

376

2012 Smart Grid Peer Review Presentations - Day 2 First Afternoon...  

Broader source: Energy.gov (indexed) [DOE]

First Afternoon Session 2012 Smart Grid Peer Review Presentations - Day 2 First Afternoon Session The Office of Electricity Delivery and Energy Reliability held its bi-annual peer...

377

2012 Smart Grid Peer Review Presentations - Day 2 Smart Grid...  

Broader source: Energy.gov (indexed) [DOE]

Smart Grid Panel Discussion 2012 Smart Grid Peer Review Presentations - Day 2 Smart Grid Panel Discussion The Office of Electricity Delivery and Energy Reliability held its...

378

2012 Smart Grid Peer Review Presentations - Day 2 Second Afternoon...  

Broader source: Energy.gov (indexed) [DOE]

Second Afternoon Session 2012 Smart Grid Peer Review Presentations - Day 2 Second Afternoon Session The Office of Electricity Delivery and Energy Reliability held its bi-annual...

379

AMO Industry Day Workshop, February 25th, Targets Smart Manufacturing...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Addthis AMO will host an Industry Day workshop to explain the concept, vision, and technology needs associated with support for a Clean Energy Manufacturing Innovation Institute...

380

INNOVATION EDUCATION EXCELLENCE DISTILLATIONS  

E-Print Network [OSTI]

. Our Department is a powerhouse in the area of chem- istry applied to medicine. Andrei Yudin and his

Chan, Hue Sun

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

(distillation) (Le Chatelier  

E-Print Network [OSTI]

acetate(methyl-, ethyl-, butyl-) , methanol isobutene MTBE , ethanol isobutene ETBE , methanol 2-methyl-1% MTBE 3 DMC . 2% 1990 MTBE 1999 3 2002 MTBE . [ 1-1 ] Phosgene process polycarbonate(PC) 50/ . DMC DMC MTBE / . ( : Amoco, "Review of DMC Manufacture and its

Hong, Deog Ki

382

Imagine the result [A Day in the Life of an  

E-Print Network [OSTI]

Assessment, Management & Remediation · Sustainability Services · Etc. #12;© 2011 ARCADIS20 April 20115 Health: · Well installations · Soil boring installations · Soil/rock core logging · Aquifer pump tests Field Day Soil Vapor Sampling #12;© 2011 ARCADIS20 April 201118 A Typical Field Day Collecting Soil

Militzer, Burkhard

383

LBID-2488, Rev 1 LBNL Monitor Day-to-  

E-Print Network [OSTI]

LBID-2488, Rev 1 LBNL Monitor Day-to- Day Work Activities Notification Conduct Investigation activities. 2. LBNL personnel, subcontractor, or guest creates or witnesses an adverse ES&H occurrence. 3 approve all final ORPS reports, including corrective actions. Figure 3.1. LBNL Occurrence Reporting

384

IMAGES IN EMBRYOLOGY............................................................................ Development of the human heart: days 1521  

E-Print Network [OSTI]

............................................................................ Development of the human heart: days 15­21 I n this series, three dimensional computer graphics are used to present the anatomical structures involved in the different stages of normal human heart development visit: www.virtual-heart- development.univ-rennes1.fr During the third week of gestation (days 15

Boyer, Edmond

385

Summary, Attendee Input, and Day 1 Wrap Up  

Broader source: Energy.gov [DOE]

Summary and wrap up of day 1 presentations and preview of day 2 by DOE Integrated Safety Management Co-champions Patricia R. Worthington, HSS Director, Office of Health and Safety; and and Ray J. Corey, Assistant Manager for Safety and Environment, DOE Richland Operations Office.

386

FIRST DAY SECTION TWO VIRGINIA BOARD OF BAR EXAMINERS  

E-Print Network [OSTI]

FIRST DAY SECTION TWO VIRGINIA BOARD OF BAR EXAMINERS Roanoke, Virginia - July 25, 2006 You MUST." Richard is still living. George has contracted to sell Tract 1 to Craig. Tract 2. Ten years ago, Cain holds, gave all required notices, and set the sale for 30 days from today. Tract 4. Ten years ago

Marsh, David

387

FIRST DAY SECTION TWO VIRGINIA BOARD OF BAR EXAMINERS  

E-Print Network [OSTI]

FIRST DAY SECTION TWO VIRGINIA BOARD OF BAR EXAMINERS Roanoke, Virginia ­ July 26, 2011 You MUST days from today. Tract 2. Ten years ago, Amelia conveyed Tract 2 to her children, Julia and Mary. Ten years ago, Carl conveyed Tract 4 by a deed reciting, "I convey Tract 4 to Sean and his heirs so

Marsh, David

388

WCROC Organic Dairy Day Tuesday, August 13, 2013  

E-Print Network [OSTI]

at 8008768636. Printed on recycled and recyclable paper with at least 10 percent postconsumer waste materialWCROC Organic Dairy Day Tuesday, August 13, 2013 West Central Research and Outreach Center. For More Information Contact: Brad Heins, 3205891711 or hein0106@umn.edu WCROC Organic Dairy Day

Blanchette, Robert A.

389

WCROC Organic Dairy Day Tuesday, August 13, 2013  

E-Print Network [OSTI]

-876-8636. Printed on recycled and recyclable paper with at least 10 percent postconsumer waste material. All rightsWCROC Organic Dairy Day Tuesday, August 13, 2013 West Central Research and Outreach Center,Morris, MN SEMINARS AND PASTURE TOURS ­ 10AM TO 3PM WCROC Organic Dairy Day Tuesday, August 13, 2013 West

Blanchette, Robert A.

390

A Characterization and Evaluation of Coal Liquefaction Process Streams. Results of Inspection Tests on Nine Coal-Derived Distillation Cuts in the Jet Fuel Boiling Range  

SciTech Connect (OSTI)

This report describes the assessment of the physical and chemical properties of the jet fuel (180-300 C) distillation fraction of nine direct coal liquefaction products and compares those properties to the corresponding specifications for aviation turbine fuels. These crude coal liquids were compared with finished fuel specifications specifically to learn what the refining requirements for these crudes will be to make them into finished fuels. The properties of the jet fuel fractions were shown in this work to require extensive hydrotreating to meet Jet A-1 specifications. However, these materials have a number of desirable qualities as feedstocks for the production of high energy-density jet fuels.

S. D. Brandes; R. A. Winschel

1999-12-30T23:59:59.000Z

391

Dissolution and compaction of albite sand in distilled water and pH-buffered carboxylic acid solutions: experiments at 100 degrees and 160 degrees C  

E-Print Network [OSTI]

. The confining fluid was either distilled water or a mixture of 3 parts Kerosene and 1 part SAE-30 non-detergent motor oil; confining pressure was controlled by an air- operated Sprague? pump. Inside the pressure vessel, the reaction cell (10 cm x 4. 4 cm O. D... sand. Fluid flows in and out of the reaction cell through Hastelloy C-276? lines. Slow flow rates (0. 08 ml/hr) and pore fluid pressures were controlled by an Isco? micro-processor syringe pump and a manually operated HiP? synnge pump. Rapid flow...

Carpenter, Thomas Doyle

1995-01-01T23:59:59.000Z

392

Ares I-X 30 Day ReportAres I-X 30 Day Report Bob Ess, Mission Manager  

E-Print Network [OSTI]

Ares I-X 30 Day ReportAres I-X 30 Day Report Bob Ess, Mission Manager Marshall Smith, SE&I Chief Bob Ess, Mission Manager Marshall Smith, SE&I Chief December 3, 2009December 3, 2009 www.nasa.gov #12

Waliser, Duane E.

393

Prediction of middle-distillate fuel properties using liquid chromatography-proton nuclear magnetic resonance spectroscopy data. Final report, 1987-1988  

SciTech Connect (OSTI)

This research was initiated to support the Army's capability to identify the components of fuels that contribute to low-temperature performance of fuels. It was discovered that various physical properties of middle-distillate fuels can be predicted. The LC-{sup 1}HNMR technique was developed to predict physical properties based on chemical structures present in the fuels. The prediction of properties is approached from a 'group property' point of view. In the group property approach, the structure of the molecule is examined for structural features that dictate the physical properties of the compounds. In other words, the physical properties of a molecule or compound are determined by the number of types of chemical groups, i.e., methyl, methylene, methine, etc., present. These LC-{sup 1}H NMR predicted property measurements were compared to measurements obtained by the ASTM fuel tests. Most measurements were found to be within experimental error. The research has demonstrated that the LC-{sup 1}H NMR approach for measuring various middle-distillate fuel properties can be used as an alternative to the ASTM methods of fuel property measurement.

Swann, M.

1989-06-01T23:59:59.000Z

394

Single-Step Syngas-to-Distillates (S2D) Process Based on Biomass-Derived Syngas – A Techno-Economic Analysis  

SciTech Connect (OSTI)

This study reports the comparison of biomass gasification based syngas-to-distillate (S2D) systems using techno-economic analysis (TEA). Three cases, state of technology (SOT) case, goal case, and conventional case, were compared in terms of performance and cost. The SOT case and goal case represent technology being developed at Pacific Northwest National Laboratory for a process starting with syngas using a single-step dual-catalyst reactor for distillate generation (S2D process). The conventional case mirrors the two-step S2D process previously utilized and reported by Mobil using natural gas feedstock and consisting of separate syngas-to-methanol and methanol-to-gasoline (MTG) processes. Analysis of the three cases revealed that the goal case could indeed reduce fuel production cost over the conventional case, but that the SOT was still more expensive than the conventional. The SOT case suffers from low one-pass yield and high selectivity to light hydrocarbons, both of which drive up production cost. Sensitivity analysis indicated that light hydrocarbon yield, single pass conversion efficiency, and reactor space velocity are the key factors driving the high cost for the SOT case.

Zhu, Yunhua; Jones, Susanne B.; Biddy, Mary J.; Dagle, Robert A.; Palo, Daniel R.

2012-08-01T23:59:59.000Z

395

Single-Step Syngas-to-Distillates (S2D) Process Based on Biomass-Derived Syngas - A Techno-Economic Analysis  

SciTech Connect (OSTI)

This study compared biomass gasification based syngas-to-distillate (S2D) systems using techno-economic analysis (TEA). Three cases, state of technology (SOT), goal, and conventional, were compared in terms of performance and cost. The SOT case represented the best available experimental results for a process starting with syngas using a single-step dual-catalyst reactor for distillate generation. The conventional case mirrored a conventional two-step S2D process consisting of separate syngas-to-methanol and methanol-to-gasoline (MTG) processes. The goal case assumed the same performance as the conventional, but with a single-step S2D technology. TEA results revealed that the SOT was more expensive than the conventional and goal cases. The SOT case suffers from low one-pass yield and high selectivity to light hydrocarbons, both of which drive up production cost. Sensitivity analysis indicated that light hydrocarbon yield and single pass conversion efficiency were the key factors driving the high cost for the SOT case.

Zhu, Y.; Jones, S. B.; Biddy, M. J.; Dagle, R. A.; Palo, D. R.

2012-08-01T23:59:59.000Z

396

Remembering the long day's journey to a historic machine's Christmas...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and ushered in more than a decade of record-setting experiments on the big PPPL machine. But that first step was hardly easy. The historic day began on Dec. 23, 1982, and...

397

Eawag GL search Theoretical Evolutionary Ecosystems Ecology Half day symposium  

E-Print Network [OSTI]

Eawag GL search Theoretical Evolutionary Ecosystems Ecology Half day symposium ,,Theoretical of natural communities #12;Eawag GL search Theoretical Evolutionary Ecosystems Ecology Abstracts Carlos data sets and theory in a flexible framework. #12;Eawag GL search Theoretical Evolutionary Ecosystems

Wehrli, Bernhard

398

2014 Advanced Grid Modeling Peer Review Presentations - Day One...  

Broader source: Energy.gov (indexed) [DOE]

- Day One Afternoon Session The Office of Electricity Delivery and Energy Reliability held a peer review of the Advanced Grid Modeling Program on June 17-18, 2014 in...

399

2012 Smart Grid Peer Review Presentations - Day 1 Morning Session...  

Broader source: Energy.gov (indexed) [DOE]

Morning Session 2012 Smart Grid Peer Review Presentations - Day 1 Morning Session The Office of Electricity Delivery and Energy Reliability held its bi-annual peer review of the...

400

The Preuss School UCSD Daily Bulletin B Day  

E-Print Network [OSTI]

like ASB Ball, college formals, etc. Register online at www.mysignup.com/freedress Dates: April 18th Graders: Tuesday, March 21st will be the first day in the new wheel class: 6th Grade Science (Rupert

Russell, Lynn

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

The Preuss School UCSD Daily Bulletin A Day  

E-Print Network [OSTI]

like ASB Ball, college formals, etc. Register online at www.mysignup.com/freedress Dates: April 18th: Tuesday, March 21st will be the first day in the new wheel class: 6th Grade Science (Rupert) moves

Russell, Lynn

402

Using waste wood as fuel saves $2000 per day  

SciTech Connect (OSTI)

Sawdust and wood residue replaced natural gas or number 2 fuel oil to fire 2 kilns at the Cherokee Brick Co. in Raleigh, NC, resulting in savings of $2000/day. Exhaust air from the kilns was sent directly back to a rotating dryer to dry the waste wood. The dried wood containing 8 to 12% moisture was supplied, around the clock, at a rate of 140 ton/day of dry material. (BLM)

Ragland, W. (Cherokee Brick Co., Raleigh, NC); Byrnes, D.

1981-11-01T23:59:59.000Z

403

Identifying Opportunities for Industrial Energy Conservation  

E-Print Network [OSTI]

. Cement Making 5. Vacuum Distillation 4. Cooking 6. Hydrocracking 5. Glass Melting 7. Hydrogen Production 6. Copper Smelting 8. Hydrorefining/Hydrotreating 7. Miscellaneous 9. Visbreaking 10. Petroleum Coking 11. Desulfurization C. Iron and Steel I...

Hoffman, A. R.

1981-01-01T23:59:59.000Z

404

Regional variations of days of autonomy for solar energy applications  

SciTech Connect (OSTI)

A problem faced by designers of stand-alone solar installations is the sizing of the collector area and storage capacity. From a curve of the minimum possible insolation over any period of days for a given site, a functional relationship between the collector-area and storage-capacity that provides a 0% probability of not meeting load (PNML) can be derived. This permits evaluating the regional variations in days-of-autonomy required to provide 100% reliability. Such variations are shown for Texas based on recent insolation data.

Grindle, E. II; Vliet, G.C.

1999-07-01T23:59:59.000Z

405

Celebrate Earth Day with Secretary Chu | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Day with Secretary Chu Celebrate Earth Day with

406

Take Our Daughters and Sons to Work Day  

Broader source: Energy.gov [DOE]

2014 is the 21st anniversary of the annual opportunity to immerse your children and relatives in the daily work of the Energy Department. On Thursday, April 24, bring your daughters and sons to the office with you for a day of shadowing your work, showing off your office, testing out the cafeteria, and meeting your coworkers. Check with your office for structured activities.

407

Day 1 -September 10 Green Event and `Starling magic'  

E-Print Network [OSTI]

Day 1 - September 10 Green Event and `Starling magic' 12:00 ­ 18:30 Welcome and check Venue: Fællessalen, Christiansborg Palace, Rigs- dagsgården 08:00 Registration and coffee/tea 09 and Sweden Lari Pitkä-Kangas, Deputy Mayor, Urban Ecology (Green Party) City of Malmö, Sweden 09:40 Children

Edinburgh, University of

408

OSU Agricultural Composting Workshop Day 1 Title Description  

E-Print Network [OSTI]

OSU Agricultural Composting Workshop Day 1 Title Description 8:30 Registration 9:00 Welcome; provide handouts; form work groups 9:30 The composting process Stages of composting; composting methods; composting parameters (temperature, moisture, C/N ratio, pH, micro-organisms, etc.); what should I compost

Tullos, Desiree

409

American Cranberry Growers Association 2011 Summer Field Day  

E-Print Network [OSTI]

American Cranberry Growers Association 2011 Summer Field Day Thursday, August 18, 2011 Rutgers University P.E. Marucci Center for Blueberry & Cranberry Research & Extension, Chatsworth, NJ Parking will be available at the Center's shop (across cranberry bogs). Transportation for tours will be provided

Chen, Kuang-Yu

410

Waisman Center Day with the Experts: Down Syndrome  

E-Print Network [OSTI]

Waisman Center Day with the Experts: Down Syndrome 4th Annual Saturday, March 22, 2014 | 9:00 a on Adults with Down Syndrome Marsha Mailick, PhD, Director, Waisman Center This presentation will report findings from a 22-year study of 75 adults with Down syndrome and their families. We found that when

Wisconsin at Madison, University of

411

Consulting Day Report 2008 Center for Nonprofit Strategy and Management  

E-Print Network [OSTI]

Consulting Day Report 2008 Center for Nonprofit Strategy and Management School of Public affairs Baruch College City University of New York 2008 #12;Center for Nonprofit Strategy and Management Baruch follow. #12;Center for Nonprofit Strategy and Management Baruch College School of Public Affairs 3

Rosen, Jay

412

Invitation/Program Technology Watch Day on Future Biofuels  

E-Print Network [OSTI]

Invitation/Program Technology Watch Day on Future Biofuels and 4. TMFB International Workshop;International Research Centers Focussing on Future Biofuels are Presenting Their Research Approaches and Current Concerning Future Biofuels DBFZ ­ Deutsches Biomasseforschungszentrum M. Seiffert, F. Mueller-Langer German

413

and Co-Host Riverside Electric Vehicle Day  

E-Print Network [OSTI]

and Co-Host Riverside Electric Vehicle Day Where: UC Riverside | CE-CERT, 1084 Columbia Ave, 92507 renewable sourc- es, efficiently use electric transporta- tion through advanced vehicles and im- prove our million electric vehi- cles on California's roads by 2023 and to ensure that low-income communities, which

Mills, Allen P.

414

Spain and the Bologna Plan: A Modern Day  

E-Print Network [OSTI]

Spain and the Bologna Plan: A Modern Day Controversy By: Danielle Vasan Communication of Privatization #12;Higher Education in Spain before Bologna 1983: Three-cycled degree system Diplomado (3-5 years) Licenciado (1-2 years) Doctor (3 years & Thesis) #12;Higher Education in Spain Today Graduado

New Hampshire, University of

415

The Preuss School UCSD Daily Bulletin A Day  

E-Print Network [OSTI]

is National Poetry Month! Today is the last day, but here's a poem to help you find the poet in yourself. Keep reading, dreaming, and writing poetry! (4/30 ­Ms. Gabay) A New Poet by Linda Pastan Finding a new poet

Russell, Lynn

416

Essentials of Energy Key concepts for the day  

E-Print Network [OSTI]

Essentials of Energy 4/14/05 Key concepts for the day Markets monopoly Substitution volatility Energy intensity Levelized costs externalities I. Market essentials Are there working energy markets · international geo-political issues Speculation Long lead times for development so supply is not very responsive

417

The College of Optics & Photonics 1 Industrial Affiliates Day  

E-Print Network [OSTI]

3/7/14 1 CREOL The College of Optics & Photonics 1 Industrial Affiliates Day 2014 Symposium Advances in Optics & Photonics CREOLThe College of Optics and Photonics CREOL The College of Optics & Photonics 2 MJ Soileau V.P. for Research & Commercialization Professor of Optics, ECE & Physics Founder

Van Stryland, Eric

418

The College of Optics & Photonics Industrial Affiliates Day  

E-Print Network [OSTI]

CREOL The College of Optics & Photonics Industrial Affiliates Day 2011 Symposium on FAR IR & THZ Photonics CREOLThe College of Optics and Photonics #12;CREOL The College of Optics & Photonics Studentofthe characterization Dimitrios Mandridis Graduate Student CREOL,TheCollegeofOptics Photonics 2:05Walktothe

Van Stryland, Eric

419

2008 TEAM BUILDING DAY For the teams of the  

E-Print Network [OSTI]

2008 TEAM BUILDING DAY For the teams of the DST/NRF CENTRE OF EXCELLENCE IN TREE HEALTH BIOTECHNOLOGY (CTHB) AND THE TREE PROTECTION COOPERATIVE PROGRAMME (TPCP) AT FABI Prepared by James Mehl, administrative and technical personnel, research and postdoctoral fellows, and postgraduate students (MSc and Ph

420

Summary, Attendee Input, and Final Day 2 Wrap up  

Broader source: Energy.gov [DOE]

Summary and wrap up by DOE Integrated Safety Management Co-champions Patricia R. Worthington, HSS Director, Office of Health and Safety; and and Ray J. Corey, Assistant Manager for Safety and Environment, DOE Richland Operations Office of day 2 presentations and discussions.

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Office of Evaluation and Testing Test Day Tips  

E-Print Network [OSTI]

Office of Evaluation and Testing Test Day Tips Get plenty of rest the night before the test. The best thing to do the evening before the test is to get a good night's sleep. You've covered the content and you've perfected the skills. Now it's time to get in test mode -- calm, rested, confident, and ready

Brinkmann, Peter

422

FIRST DAY SECTION ONE VIRGINIA BOARD OF BAR EXAMINERS  

E-Print Network [OSTI]

FIRST DAY SECTION ONE VIRGINIA BOARD OF BAR EXAMINERS Roanoke, Virginia -July 27, 2004 Write your's sister, Gladys, who lived in Culpeper, Virginia. In 1994,when Cameron was ten years old, Izzy wrote her fully. * * * * * #12;SECTION ONE PAGE 2 2. Stan is an attorney practicing criminal law in Roanoke

Marsh, David

423

Security Automation Developer Days March 22-25, 2011  

E-Print Network [OSTI]

Security Automation Developer Days March 22-25, 2011 Portrait Room The National Institute Reporting Format (ARF) efforts. 1:00 ­ 2:50 Adv. Tailoring and Automated Profile Selection Charles Schmidt tailoring procedures, and structures that could support automated selection of profiles. This discussion

Magee, Joseph W.

424

Energy Productivity Via Time-of-Day Rates  

E-Print Network [OSTI]

-intensive industrial customers to lower their cost of power while at the same time improving the load characteristics of their utility supplier. This paper examines the present state of time-of-day rates and discusses steps that Air Products is taking to maximize...

Michael, R. S.

1984-01-01T23:59:59.000Z

425

45-Day Language Hearing Agenda Building Energy Efficiency Standards  

E-Print Network [OSTI]

Shirakh 09:15 AM Revisions to Sections 10-101 ­ 10-114 ­ Energy Building Regulations, All Occupancies Gary45-Day Language Hearing Agenda Building Energy Efficiency Standards Revisions for Residential for Solar Ready Buildings ­ All Occupancies Patrick Saxton 10:35 AM Revisions to Sections 150

426

ENGINEERS' DAY 2011 ACTIVITIES 1800 Engineering Hall, 1415 Engineering Drive  

E-Print Network [OSTI]

, Operations Support Exelon Nuclear Warrenville, Illinois Brian J. Rauch Vice President, Engineering John DeereENGINEERS' DAY 2011 ACTIVITIES 1800 Engineering Hall, 1415 Engineering Drive 5:30 SOCIAL HOUR · Distinguished Achievement Awards · Early-Career Achievement Award · College of Engineering faculty and staff

Sheridan, Jennifer

427

Degree Day Calculations Dr. Nikki Rothwell, District Fruit IPM Educator  

E-Print Network [OSTI]

. For example, if the min/max thermometer indicates a low of 45 degrees F and a high of 75 degrees F F, then 10 degree days would have accumulated. Check your thermometer and make this calculation each toward your target number. Minimum and maximum temperatures should be recorded from a Min/Max thermometer

428

John Day Watershed Restoration Projects, annual report 2003.  

SciTech Connect (OSTI)

The John Day is the nation's second longest free-flowing river in the contiguous United States and the longest containing entirely unsupplemented runs of anadromous fish. Located in eastern Oregon, the basin drains over 8,000 square miles, Oregon's fourth largest drainage basin, and incorporates portions of eleven counties. Originating in the Strawberry Mountains near Prairie City, the John Day River flows 284 miles in a northwesterly direction, entering the Columbia River approximately four miles upstream of the John Day dam. With wild runs of spring Chinook salmon and summer steelhead, westslope cutthroat, and redband and bull trout, the John Day system is truly a basin with national significance. The majority of the John Day basin was ceded to the Federal government in 1855 by the Confederated Tribes of the Warm Springs Reservation of Oregon (Tribes). In 1997, the Tribes established an office in the basin to coordinate restoration projects, monitoring, planning and other watershed activities on private and public lands. Once established, the John Day Basin Office (JDBO) formed a partnership with the Grant Soil and Water Conservation District (GSWCD), which contracts the majority of the construction implementation activities for these projects from the JDBO. The GSWCD completes the landowner contact, preliminary planning, engineering design, permitting, construction contracting, and construction implementation phases of most projects. The JDBO completes the planning, grant solicitation/defense, environmental compliance, administrative contracting, monitoring, and reporting portion of the program. Most phases of project planning, implementation, and monitoring are coordinated with the private landowners and basin agencies, such as the Oregon Department of Fish and Wildlife and Oregon Water Resources Department. In 2003, the JDBO and GSWCD proposed continuation of their successful partnership between the two agencies and basin landowners to implement an additional twelve (12) watershed conservation projects. The types of projects include off channel water developments, juniper control, permanent diversions, pump stations, and return-flow cooling systems. Due to funding issues and delays, permitting delays, fire closures and landowner contracting problems, 2 projects were canceled and 7 projects were rescheduled to the 2004 construction season. Project costs in 2003 totaled $115,554.00 with a total amount of $64,981.00 (56%) provided by the Bonneville Power Administration (BPA) and the remainder coming from other sources such as the Bureau of Reclamation (BOR), Oregon Watershed Enhancement Board, the U.S. Fish & Wildlife Service Partners in Wildlife Program and individual landowners.

Brown, Linda (Confederated Tribes of the Warm Springs Reservation of Oregon, John Day Basin Office, John Day, OR)

2004-01-01T23:59:59.000Z

429

Petroleum Coke: A Viable Fuel for Cogeneration  

E-Print Network [OSTI]

; buy sulfur dioxide credits on the open market; install FGD; or switch to clean coal technology such as circulating fluidized bed combustion and gasification. Current trends in utility modernization are to utilize new clean coal technologies...

Dymond, R. E.

430

Coking Coal Prices for Industry - EIA  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOil andMCKEESPORTfor thePrices for Industry

431

Table 16. U.S. Coke Exports  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328AdministrationReleaseMetallurgical Coal Exports by

432

Table 21. U.S. Coke Imports  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328AdministrationReleaseMetallurgical Coal ExportsPrice

433

Museum Day at Bradbury Science Museum Sept. 24  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscale Subsurface Biogeochemical Modeling MultiscaleMuseum Day

434

The modern day discount house as a separate retail establishment  

E-Print Network [OSTI]

Opinions of Authorities In Retailing Analysis of Authorities' Conclusions Author's Conclusions Settling of Retail Margins Trend Toward Larger Stores Elimination of "List Price" and "Fair Trade" Every Large Retailer a Type of Department St, ore... Department Store X, 1955 22 Gross Margin, Old-Line Retailers Versus Masters, Inc. , 1954 Listed Discounts in Different Departments oi' Better Business Buying, Inc. , Berkeley, cali fornia--1955 25 27 THE MODERN DAY DISCOUNT HOUSE AS A SEPARATE RETAIL...

Broussard, Carroll James

2012-06-07T23:59:59.000Z

435

Training days: TWRI coordinates water resources training programs  

E-Print Network [OSTI]

tx H2O | pg. 2 Training days TWRI coordinates water resources training programs | pg. 2 Story by Ric Jensen tx H2O | pg. 3 H elping water professionals learn how to manage water resources is the goal of new training programs coordinated... (APEX), Water Rights Analysis Package (WRAP), and EPANET. In other training programs, the institute is working with Texas AgriLife Research, Texas AgriLife Extension Service, state and federal agencies, and various universities to conduct training...

Jensen, Ric

2008-01-01T23:59:59.000Z

436

Refines Efficiency Improvement  

SciTech Connect (OSTI)

Refinery processes that convert heavy oils to lighter distillate fuels require heating for distillation, hydrogen addition or carbon rejection (coking). Efficiency is limited by the formation of insoluble carbon-rich coke deposits. Heat exchangers and other refinery units must be shut down for mechanical coke removal, resulting in a significant loss of output and revenue. When a residuum is heated above the temperature at which pyrolysis occurs (340 C, 650 F), there is typically an induction period before coke formation begins (Magaril and Aksenova 1968, Wiehe 1993). To avoid fouling, refiners often stop heating a residuum before coke formation begins, using arbitrary criteria. In many cases, this heating is stopped sooner than need be, resulting in less than maximum product yield. Western Research Institute (WRI) has developed innovative Coking Index concepts (patent pending) which can be used for process control by refiners to heat residua to the threshold, but not beyond the point at which coke formation begins when petroleum residua materials are heated at pyrolysis temperatures (Schabron et al. 2001). The development of this universal predictor solves a long standing problem in petroleum refining. These Coking Indexes have great potential value in improving the efficiency of distillation processes. The Coking Indexes were found to apply to residua in a universal manner, and the theoretical basis for the indexes has been established (Schabron et al. 2001a, 2001b, 2001c). For the first time, a few simple measurements indicates how close undesired coke formation is on the coke formation induction time line. The Coking Indexes can lead to new process controls that can improve refinery distillation efficiency by several percentage points. Petroleum residua consist of an ordered continuum of solvated polar materials usually referred to as asphaltenes dispersed in a lower polarity solvent phase held together by intermediate polarity materials usually referred to as resins. The Coking Indexes focus on the amount of these intermediate polarity species since coke formation begins when these are depleted. Currently the Coking Indexes are determined by either titration or solubility measurements which must be performed in a laboratory. In the current work, various spectral, microscopic, and thermal techniques possibly leading to on-line analysis were explored for measuring the Coking Indexes.

WRI

2002-05-15T23:59:59.000Z

437

Saving for dry days: Aquifer storage and recovery may help  

E-Print Network [OSTI]

tx H2O | pg. 2 Saving for dry days Story by Kathy Wythe tx H2O | pg. 3 Aquifer storage and recovery may help With reoccurring droughts and growing population, Texas will always be looking for better ways to save or use water. Some water... suppliers in Texas are turning to aquifer storage and recovery. During the dry summer of 2008, the San Antonio Water System (SAWS) had enough assets in its ?bank? (of water) to make with- drawals to meet the needs of its customers. The water bank...

Wythe, Kathy

2008-01-01T23:59:59.000Z

438

Probability analysis of dry-day sequences in Texas  

E-Print Network [OSTI]

0. d 0. 5 0. 4 0. 3 0. 2 0. 1 0 20 40 d0 80 100 120 140 140 180 200 220 240 240 280 300 320 340 340 JULIAN DATE Fig, 7. Three-cycle maximum and minimum probabilities for Brownsville, Texas. 1. 0 m I a O 0. 9 0. 8 0. 7 0. d 0. 8 0...PROBABILITY ANALYSIS OF DRY-DAY SEQUENCES IN TEXAS A I'hesis by ROBERT SAMES MILNE Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE DECEMBER 1971 Major...

Milne, Robert James

1971-01-01T23:59:59.000Z

439

Early Days of Coal Research | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQ Contract ESPC IDIQ ContractConsumerofof Energy EX33Early Days

440

Property:Cost(per day) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformationInyoCoolingTowerWaterUseSummerConsumed Jump to: navigation,Cost(per day) Jump to:

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

12 Days of Energy Savings | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South Valley Responsible DOEQA: NA Root CauseDepartment0,000thhe 201112 Days of

442

Geothermal: Sponsored by OSTI -- IGPPS Days Program Review Administrative  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: Crystal structureComposite--FORRemarks IGPPS Days Program Review

443

Day After Trinity: Oppenheimer and the Atomic Bomb  

SciTech Connect (OSTI)

On October 31st at 4:00 pm in Panofsky Auditorium SLAC’s Colloquium Series will present the exceptional Oscar-nominated documentary The Day After Trinity. The film offers invaluable insight into historic events which have forever changed the face of our world – this screening should not to be missed. After witnessing the tremendous destructive power of the atomic bomb, J. Robert Oppenheimer declared “I have become death”. Still topically relevant a quarter of a century since its release, Director Jon Else’s documentary uses interviews, archival footage, and narration to reveal the internal landscape of the man whose leadership at Los Alamos, New Mexico, defined the rise of the Manhattan Project and the beginning of the Atomic Age. The Day After Trinity traces the unexpected path of Oppenheimer’s career - from his formation of the Los Alamos colony and the first successful atomic bomb detonation at the Trinity test site in 1945, to his final years spent branded as a security risk and excluded from the atomic energy research he pioneered due to his opposition to the development of the Hydrogen bomb.

Documentary

2005-10-31T23:59:59.000Z

444

UC San Diego For A Day Lectures Available for Visitors Spring Quarter 2014  

E-Print Network [OSTI]

UC San Diego For A Day Lectures Available for Visitors Spring Quarter 2014 Day(s) Start Time End PHYS 1C Coil, Alison YORK HALL 2722 12:00 PM 12:50 PM Calculus & Analytical Geometry

Tsien, Roger Y.

445

Rapid prediction of various physical properties for middle distillate fuel utilizing directly coupled liquid chromatography//sup 1/H nuclear magnetic resonance  

SciTech Connect (OSTI)

A group property approach has been developed to predict 17 physical properties of middle distillate (e.g., jet and diesel) fuels from experimentally derived liquid chromatography//sup 1/H nuclear magnetic resonance (LC//sup 1/H NMR) data. In the LC//sup 1/H NMR technique, the fuel is separated according to chemical class and the average molecular structure for each chemical class is then calculated. These average molecular structures form a basis set to predict the physical properties of the fuel. The physical properties that can be obtained in this manner are cetane number, cetane index, density, specific gravity, pour point, flash point, viscosity, filterability, heat of combustion, cloud point, volume percent aromatics, residual carbon content, and the initial, 10%, 50%, 90%, and end boiling points. Fourteen of the correlation coefficients for the predictions are better than 0.90 with 11 of the predictions falling either within or approximately equal to the ASTM method reproducibility for the measurement of the fuel property. The present method also provides chemical insight concerning the influence of chemical structural changes on the physical properties of the fuel as well as requiring much less analysis time and sample volume than corresponding ASTM methods.

Caswell, K.A.; Glass, T.E.; Swann, M.; Dorn, H.C.

1989-02-01T23:59:59.000Z

446

A method for the rapid, accurate prediction of the physical properties of middle distillate fuels from LC- sup 1 H NMR derived data  

SciTech Connect (OSTI)

A method has been developed whereby various physical properties of middle distillate fuels may be rapidly and accurately calculated by a group property approach from data obtained from a directly coupled Liquid Chromatograph - {sup 1}H Nuclear Magnetic Resonance Spectrometer (LC-{sup 1}H NMR). The physical properties include cetane number, cetane index, density, specific gravity, pour point, flash point, viscosity, filterability, heat of combustion, cloud point, volume percent aromatics, residual carbon content, and initial, 10%, 50%, 90%, and end boiling points. These property predictions have accuracies approaching the error for measurement of the experimental physical property and require less than two hours analysis time per fuel. An interface was developed between the NMR spectrometer and a personal computer to aid in automation of the LC-{sup 1}H NMR data collection and to perform off-line analysis of the LC-{sup 1}H NMR data. This interface and all associated software is described. Also presented is a series of model compounds studies in which the physical properties of pure hydrocarbons (i.e., alkanes, monocyclic and dicyclic aromatics) were predicted by a similar group property approach.

Caswell, K.A.

1988-01-01T23:59:59.000Z

447

90-day Second Report on Shale Gas Production - Secretary of Energy...  

Broader source: Energy.gov (indexed) [DOE]

90-day Second Report on Shale Gas Production - Secretary of Energy Advisory Board 90-day Second Report on Shale Gas Production - Secretary of Energy Advisory Board Novemeber 18,...

448

Computational Fluid Dynamics Modeling of the John Day Dam Tailrace  

SciTech Connect (OSTI)

US Army Corps of Engineers - Portland District required that a two-dimensional (2D) depth-averaged and a three-dimensional (3D) free-surface numerical models to be developed and validated for the John Day tailrace. These models were used to assess potential impact of a select group of structural and operational alternatives to tailrace flows aimed at improving fish survival at John Day Dam. The 2D model was used for the initial assessment of the alternatives in conjunction with a reduced-scale physical model of the John Day Project. A finer resolution 3D model was used to more accurately model the details of flow in the stilling basin and near-project tailrace hydraulics. Three-dimensional model results were used as input to the Pacific Northwest National Laboratory particle tracking software, and particle paths and times to pass a downstream cross section were used to assess the relative differences in travel times resulting from project operations and structural scenarios for multiple total river flows. Streamlines and neutrally-buoyant particles were seeded in all turbine and spill bays with flows. For a Total River of 250 kcfs running with the Fish Passage Plan spill pattern and a spillwall, the mean residence times for all particles were little changed; however the tails of the distribution were truncated for both spillway and powerhouse release points, and, for the powerhouse releases, reduced the residence time for 75% of the particles to pass a downstream cross section from 45.5 minutes to 41.3 minutes. For a total river of 125 kcfs configured with the operations from the Fish Passage Plan for the temporary spillway weirs and for a proposed spillwall, the neutrally-buoyant particle tracking data showed that the river with a spillwall in place had the overall mean residence time increase; however, the residence time for 75% of the powerhouse-released particles to pass a downstream cross section was reduced from 102.4 min to 89 minutes.

Rakowski, Cynthia L.; Perkins, William A.; Richmond, Marshall C.; Serkowski, John A.

2010-07-08T23:59:59.000Z

449

ADAPTION OF NONSTANDARD PIPING COMPONENTS INTO PRESENT DAY SEISMIC CODES  

SciTech Connect (OSTI)

With spiraling energy demand and flat energy supply, there is a need to extend the life of older nuclear reactors. This sometimes requires that existing systems be evaluated to present day seismic codes. Older reactors built in the 1960s and early 1970s often used fabricated piping components that were code compliant during their initial construction time period, but are outside the standard parameters of present-day piping codes. There are several approaches available to the analyst in evaluating these non-standard components to modern codes. The simplest approach is to use the flexibility factors and stress indices for similar standard components with the assumption that the non-standard component’s flexibility factors and stress indices will be very similar. This approach can require significant engineering judgment. A more rational approach available in Section III of the ASME Boiler and Pressure Vessel Code, which is the subject of this paper, involves calculation of flexibility factors using finite element analysis of the non-standard component. Such analysis allows modeling of geometric and material nonlinearities. Flexibility factors based on these analyses are sensitive to the load magnitudes used in their calculation, load magnitudes that need to be consistent with those produced by the linear system analyses where the flexibility factors are applied. This can lead to iteration, since the magnitude of the loads produced by the linear system analysis depend on the magnitude of the flexibility factors. After the loading applied to the nonstandard component finite element model has been matched to loads produced by the associated linear system model, the component finite element model can then be used to evaluate the performance of the component under the loads with the nonlinear analysis provisions of the Code, should the load levels lead to calculated stresses in excess of Allowable stresses. This paper details the application of component-level finite element modeling to account for geometric and material nonlinear component behavior in a linear elastic piping system model. Note that this technique can be applied to the analysis of B31 piping systems.

D. T. Clark; M. J. Russell; R. E. Spears; S. R. Jensen

2009-07-01T23:59:59.000Z

450

Intermediate Vapor Expansion Distillation and Nested Enrichment Cascade Distillation  

E-Print Network [OSTI]

requiring either compressors or expanders. function of feed composition. The simple column has a single reboiler, single condenser, and is idealized to the extent that column pressure differential and heat exchanger temperature differential are set... Separation Z. Nested Enrichment Cascade For separating liquid mixtures above ambient temperature, both full 'cascade~ and also enrichment cascades have been used. They reduce the heat throughput by about 40% but do not decrease the energy consumption...

Erickson, D. C.

451

DistillationTheory.fm 2 September 1999 Distillation Theory.  

E-Print Network [OSTI]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 The Energy Balance and the Assumption of Constant Molar flows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Assumption about Constant Molar Flows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Minimum Number of Stages -- Infinite Energy

Skogestad, Sigurd

452

No. 2 Distillate Prices - Residential  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn CyberNeutronsNewNewsNickNiriConnecticut - - - -

453

Imports of Distillate Fuel Oil  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0, 1997Environment >7,992000Implications ofU.S.270 300

454

No. 2 Distillate Prices - Industrial  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month WeekReserves (Billion Cubic1.878 2.358 - -

455

No. 2 Distillate Prices - Residential  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month WeekReserves (Billion Cubic1.878 2.358 -

456

Stocks of Distillate Fuel Oil  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781 2,328AdministrationRelease ScheduleU.S. Energy(EIA)

457

Impacts of Improved Day-Ahead Wind Forecasts on Power Grid Operations: September 2011  

SciTech Connect (OSTI)

This study analyzed the potential benefits of improving the accuracy (reducing the error) of day-ahead wind forecasts on power system operations, assuming that wind forecasts were used for day ahead security constrained unit commitment.

Piwko, R.; Jordan, G.

2011-11-01T23:59:59.000Z

458

Resolving to Make Earth Day Last All Year | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Resolving to Make Earth Day Last All Year Resolving to Make Earth Day Last All Year March 21, 2011 - 4:49pm Addthis Amy Foster Parish What was your New Year's resolution this year?...

459

Resolving to Make Earth Day Last All Year | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Resolving to Make Earth Day Last All Year Resolving to Make Earth Day Last All Year March 21, 2011 - 1:31pm Addthis Amy Foster Parish What was your New Year's resolution this year?...

460

Take Our Daughters and Sons to Work Day | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

this year for Take your Sons and Daughters to Work Day, DOE has combined it with Earth Week's "Community Day" to honor the celebration. The event starts at 7:00AM with a...

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Bluer Skies and Brighter Days: The U.S. and India Collaborate...  

Office of Environmental Management (EM)

Bluer Skies and Brighter Days: The U.S. and India Collaborate in First Long-Term Climate Experiment Bluer Skies and Brighter Days: The U.S. and India Collaborate in First Long-Term...

462

Day 2 at the 2014 ARPA-E Innovation Summit | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Day 2 at the 2014 ARPA-E Innovation Summit Day 2 at the 2014 ARPA-E Innovation Summit February 25, 2014 - 5:35pm Addthis 1 of 14 The Energy Department's ARPA-E Energy Innovation...

463

Memorial Day Weekend Sales Tax Holiday for Energy-Efficient Products  

Broader source: Energy.gov [DOE]

Purchases of certain energy-efficient products during Memorial Day weekend are exempt from the state sales and use tax.* This amounts to a three-day tax holiday beginning on the Saturday preceding...

464

Four Days Left to Buy Energy-Efficient Products for a 2009 Tax...  

Broader source: Energy.gov (indexed) [DOE]

Four Days Left to Buy Energy-Efficient Products for a 2009 Tax Credit Four Days Left to Buy Energy-Efficient Products for a 2009 Tax Credit December 28, 2009 - 7:30am Addthis...

465

Tribal Summit Live: 9:30-10 AM ET Today and All Day Tomorrow...  

Broader source: Energy.gov (indexed) [DOE]

Summit Live: 9:30-10 AM ET Today and All Day Tomorrow Tribal Summit Live: 9:30-10 AM ET Today and All Day Tomorrow May 4, 2011 - 8:00am Addthis Ginny Simmons Ginny Simmons Former...

466

Two-Day Geothermal Symposium to Highlight Low-Temperature Power...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Two-Day Geothermal Symposium to Highlight Low-Temperature Power Production Two-Day Geothermal Symposium to Highlight Low-Temperature Power Production July 7, 2010 - 2:10pm Addthis...

467

The Portable Extensible Toolkit for Scientific computing Day 1: Usage and Algorithms  

E-Print Network [OSTI]

The Portable Extensible Toolkit for Scientific computing Day 1: Usage and Algorithms Jed Brown CSCS runs performantly on a laptop · No iPhone support Jed Brown (ETH Zürich) PETSc day 1 CSCS 2010-05-10 5) · Same code runs performantly on a laptop · No iPhone support Jed Brown (ETH Zürich) PETSc day 1 CSCS

468

ESA's Programme of Exploration 1st June Aurora Industry Day 1  

E-Print Network [OSTI]

ESA's Programme of Exploration 1st June Aurora Industry Day 1 Aurora Core Programme Approach Proposed for Mars Sample Return Preparation Aurora Industry Day ­ 1st June 2006 A. PRADIER #12;ESA's Programme of Exploration 1st June Aurora Industry Day 2 OVERALL MSR CONTEXT MARS SAMPLE RETURN Represents

469

PhD day Utrecht University Graduate School of Life Sciences  

E-Print Network [OSTI]

PhD day Utrecht University Graduate School of Life Sciences On April 4 2014 the first PhD Day of the Utrecht University Graduate School of Life Sciences `Maximize your Career Perspectives' is organized here. `Maximize your Career Opportunities' The day is open to all PhD candidates of the Utrecht

Utrecht, Universiteit

470

Extreme Day Returns on Stocks: Evidence from Sweden* Adri De Ridder  

E-Print Network [OSTI]

Extreme Day Returns on Stocks: Evidence from Sweden* Adri De Ridder Gotland University Visby and Amalia Wallenberg foundation is gratefully acknowledged. #12;Extreme Day Returns on Stocks: Evidence from Sweden Abstract In this study we document that the frequency of extreme trading days, defined

Djehiche, Boualem

471

Benefits of Multi-day Industrial Center Assessments for Large Energy-Intensive Facilities  

E-Print Network [OSTI]

1 Benefits of Multi-day Industrial Center Assessments for Large Energy- Intensive Facilities1 Warren M. Heffington, Texas A&M University James A. Eggebrecht, Texas A&M University ABSTRACT Multi-day Industrial Assessment Center (IAC...) assessments are shown to be effective in serving the energy efficiency needs of large energy-intensive industrial facilities. Assessment results from two and three-day visits to eight large Industries of the Future (IOF) plants are discussed and compared...

Heffington, W.M.; Eggebrecht, J.A.

472

EEB 585 field course 2015: ITINERARY Day 1 May 15, 2015  

E-Print Network [OSTI]

in the Caribbean due to very dangerous riptides and sharks, and any student doing so will be sent home.) Day 7

Debinski, Diane M.

473

Irrigation timing: A quantitative analysis using the stress-day index.  

E-Print Network [OSTI]

, the stress-day index is defined as& SDI= CSxSD Hiler and Clark (1971) further described the stress-day i. ndex method and provided two means of determining the stress-day factor (SD). The SD is described as, ". . . . an indication of the crop water... evapotranspiration as computed from the Combination Method 26 * Table 3 Determination of SDI - an example of the method cue of computation Date CS SD bars SDI (CSxSD) SDI curn Day 1 , 25 . 25 6. 63 6, 79 1. 66 1. 70 1, 66 3. 36 . 25 6. 91 1. 73 5...

Boos, Roger Patrick

1972-01-01T23:59:59.000Z

474

Materials for Math 13900 Bring to class each day: graph paper ...  

E-Print Network [OSTI]

Materials for Math 13900. Bring to class each day: graph paper isometric dot paper unlined paper cm ruler. We will also be using: compass small scissors.

Roames, Renee S

2015-01-08T23:59:59.000Z

475

E-Print Network 3.0 - ambulatory day surgery Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

include but are not limited to incoming GDV, non-ambulatory... IVDD, trauma with fracture, recent ( <14 days) surgery case with complications (ie- incisional problem Source:...

476

NERSC Hosts HS Students on Job Shadow Day- NERSC Center News...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

facilitated by Jon Bashor of Computing Sciences and Jonathan Slack of the Environmental Energy Technologies Division, both of whom volunteered for the Job Shadow Day committee at...

477

Mother's Day  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment SurfacesResource ProgramModification andinterface1 EEnergy, Office ofMother nature

478

Father's Day  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicy andExsolutionFES6FYRANDOMOverview The652 Please note

479

Graduation Day  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Big Sky LearningGet AssistanceCatalytic SitesEmployee, Retiree Resources

480

Lorraine Day  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6,Local CorrelationsConditions.LookingLori Ross

Note: This page contains sample records for the topic "day distillation coking" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Memorial Day  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces andMapping theEnergy Storage Energy StoragePolicy, Guidance & Reports

482

Lorraine Day  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocsCenterCentera A B C D ELong2009 LANL

483

Helsinki Journal, Entry 29, February 18, 2007 Finland has a National Sledding Day, which was celebrated on Sunday. We went  

E-Print Network [OSTI]

Helsinki Journal, Entry 29, February 18, 2007 Finland has a National Sledding Day, which-conscious parents nervous. Helsinki's Paloheinä Hiuppu (Peak) on Finland's National Sledding Day. Sledding Day

Bardsley, John

484

China's Industrial Carbon Dioxide Emissions in Manufacturing Subsectors and in Selected Provinces  

E-Print Network [OSTI]

Coal Washed Coal Coke Coke Oven Gas Other Gas Other CokingTJ) Coal Coke Coke Oven Gas Other Gas Other Coking Products

Lu, Hongyou

2013-01-01T23:59:59.000Z

485

Mnoa Green Days Checklist for Buildings Being Closed Due to AC Shutdown  

E-Print Network [OSTI]

Mnoa Green Days Checklist for Buildings Being Closed Due to AC Shutdown The following Mnoa Green Days in which air conditioning to participating buildings will be shutdown over the weekends is a checklist for building occupants to use as a reference to successfully conserve energy during the Expanded

Wang, Yuqing

486

DAY VERSUS NIGHT ACTIVITY OF REEF FISHES IN A KELP FOREST OFF SANTA BARBARA, CALIFORNIA  

E-Print Network [OSTI]

DAY VERSUS NIGHT ACTIVITY OF REEF FISHES IN A KELP FOREST OFF SANTA BARBARA, CALIFORNIA ALFRED W. EBELING AND RICHARD N. BRAY! ABSTRACT Vertical distributions and feeding activities of residential kelp-bed fishes were compared between day and night in an area of reef and kelp off Santa Barbara, Calif

487

Intensely white bark on a dull winter's day AndreaKiewitt  

E-Print Network [OSTI]

- Intensely white bark on a dull winter's day ©AndreaKiewitt No. 45 January 2009 Eco birch (Betula utilis var. jacquemontii). On the grey winter day, its intensely white bark stood out revealing the strikingly white inner layers. The bark is strewn with creamy grey lenticels in the shape

488

A comparison of univariate methods for forecasting electricity demand up to a day ahead  

E-Print Network [OSTI]

A comparison of univariate methods for forecasting electricity demand up to a day ahead James W methods for short-term electricity demand forecasting for lead times up to a day ahead. The very short of Forecasters. Published by Elsevier B.V. All rights reserved. Keywords: Electricity demand forecasting

McSharry, Patrick E.

489

INTRODUCTION Modern day electronic systems such as communication systems, data handling  

E-Print Network [OSTI]

frame is time-of-year in binary coded decimal (BCD) notation in days, hours, minutes, seconds correlation with time. Parallel and serial formatted time codes are used to efficiently interface the timing system (time-of-day source) to the user system. Parallel time codes are defined in IRIG Standard 205

Berns, Hans-Gerd

490

NOAA GREAT LAKES COASTAL FORECASTING SYSTEM Forecasts (up to 5 days in the future)  

E-Print Network [OSTI]

conditions for up to 5 days in the future. These forecasts are run twice daily, and you can step through are generated every 6 hours and you can step backward in hourly increments to view conditions over the previousNOAA GREAT LAKES COASTAL FORECASTING SYSTEM Forecasts (up to 5 days in the future) and Nowcasts

491

AACR Cancer Progress Report 2012 Making Research Count for Patients: A New Day  

E-Print Network [OSTI]

AACR Cancer Progress Report 2012 Making Research Count for Patients: A New Day www.cancerprogressreport.org · www.aacr.org #12;AACR Cancer Progress Report 2012 Making Research Count for Patients: A New Day www.cancerprogressreport.org · www.aacr.org Also published as: American Association for Cancer Research. AACR cancer progress report

Sherman, S. Murray

492

2013 Minnesota Organic Dairy Day The University of Minnesota West Central Research and  

E-Print Network [OSTI]

and recyclable paper with at least 10 percent postconsumer waste material. #12;2013 Minnesota Organic Dairy Day The University of Minnesota West Central Research and Outreach Center's Organic Dairy Day will be held Tuesday, August 13, 2012, at Morris, MN from 10:00 am to 3:00 pm

Blanchette, Robert A.

493

The Two-Day CERC-BEE Forum on Building Integrated Design and Occupant Behavior  

E-Print Network [OSTI]

The Two-Day CERC-BEE Forum on Building Integrated Design and Occupant Behavior: Presentations and discussions at the two-day CERC-BEE Forum on Building Integrated Design and Occupant Behavior for High employer. #12;2013 CERC-BEE Forum on Human Behavior and Integrated Design for High Performance Buildings

494

Customer reponse to day-ahead wholesale market electricity prices: Case study of RTP program experience in New York  

E-Print Network [OSTI]

Response to Day-ahead Wholesale Market Electricity Prices:Response to Day-ahead Wholesale Market Electricity Prices:Mitigating Price Spikes in Wholesale Markets through Market-

2004-01-01T23:59:59.000Z

495

Registration General Info. Day 1 Sched. Day 2 Sched. Keynote Speaker Bios. Symposia Matrix Symposia Abstracts 14th Annual ARC Conference  

E-Print Network [OSTI]

Eaton Corporation Peter J. Savagian Director of Hybrid Powertrain Engineering GM Powertrain, General Motors Corporation Rani Finstad Global PT Director Manufacturing Design Simulation & Support, General Motors Corporation Question and Answer Session 11:45 - 1:15pm Lunch 14th Annual ARC Conference - Day 1

Papalambros, Panos

496

SMITHSONIAN MAGAZINE MUSEUM DAY The Florida Agricultural Museum will open its doors free of charge on September 27, 2014, from  

E-Print Network [OSTI]

SMITHSONIAN MAGAZINE MUSEUM DAY The Florida Agricultural Museum will open its doors free of charge on September 27, 2014, from 10 am - 3 pm, as part of Smithsonian magazine's 10th annual Museum Day Live! A nationwide event, Museum Day Live! offers free admission to visitors presenting a Museum Day Live! ticket

Florida, University of

497

By day, Luke MacDonald *10 (Civil and Environmental Engineering) is the  

E-Print Network [OSTI]

By day, Luke MacDonald *10 (Civil and Environmental Engineering) is the Assistant Director class Steering Committee and was an Annual Giving captain. Luke MacDonald *10 Alumni life is rich

Singh, Jaswinder Pal

498

Variable-base heating and cooling degree-day data for 24 Saudi Arabian cities  

SciTech Connect (OSTI)

Degree-day data are fundamental for simplified energy calculations. For Saudi Arabia the data necessary for simplified energy analysis are lacking, and the need of designers, engineers, and researchers in the building sector for such data as heating and cooling degree-days is growing. Weather data are available for many Saudi cities but not in a format usable by building designers and engineers. This paper presents variable-base heating and cooling degree-days is growing. Weather data are available for many Saudi cities but not in a format usable by building designers and engineers. This paper presents variable-base heating and cooling degree-day data for 24 Saudi locations based on long-term monthly average temperatures. These data will be of great help in performing simplified energy calculations for Saudi buildings.

Al-Homoud, M.S. [King Fahd Univ. of Petroleum and Minerals, Dhahran (Saudi Arabia). Dept. of Architectural Engineering

1998-12-31T23:59:59.000Z

499

U-245: Critical Java 0-day flaw exploited | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

the unsuspecting victims' machines REFERENCE LINKS: http:www.net-security.orgsecworld.php?id13484 zero-day CVE-2012-4681 DeepEnd Research http:www.oracle.comtechnetwork...

500

iManage Q&As Industry Day Aug 16 2012  

Broader source: Energy.gov (indexed) [DOE]

DE-SOL-0004498 Page 1 of 5 Listed below are the questions submitted by vendors attending the August 16, 2012 iManage Industry Day. All questions were submitted on 3...