Powered by Deep Web Technologies
Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

,"U.S. Refinery, Bulk Terminal, and Natural Gas Plant Stocks...  

U.S. Energy Information Administration (EIA) Indexed Site

Stocks at Refineries, Bulk Terminals, and Natural Gas Plants (Thousand Barrels)","U.S. Gasoline Blending Components Stocks at Refineries, Bulk Terminals, and Natural Gas Plants...

2

Design of Bulk Railway Terminals for the Shale Oil and Gas Industry C. Tyler Dick1  

E-Print Network [OSTI]

Page 1 Design of Bulk Railway Terminals for the Shale Oil and Gas Industry C. Tyler Dick1 , P.E., M: Railway transportation is playing a key role in the development of many new shale oil and gas reserves in North America. In the rush to develop new shale oil and gas plays, sites for railway transload terminals

Barkan, Christopher P.L.

3

Transfer passenger needs at airports : human factors in terminal design  

E-Print Network [OSTI]

This thesis analyzes the needs of particular users of airport: transfer passengers. The object of this work has been to produce a set of design guidelines for terminals. these guidelines are framed upon a user-need survey ...

Brillembourg, Marie-Claire

1982-01-01T23:59:59.000Z

4

ADAPTIVE TRANSFER ADJUSTMENT IN EFFICIENT BULK DATA TRANSFER MANAGEMENT FOR CLIMATE DATASET  

E-Print Network [OSTI]

ADAPTIVE TRANSFER ADJUSTMENT IN EFFICIENT BULK DATA TRANSFER MANAGEMENT FOR CLIMATE DATASET Alex,mbalman,ashoshani,vnatarajan}@lbl.gov, williams13@llnl.gov ABSTRACT Many scientific applications and experiments, such as high energy and nuclear is the limited network capacity for moving large datasets. A tool that addresses this challenge is the Bulk Data

5

Critical analysis of plume containment modeling in a thin heterogeneous unconfined aquifer: application to a bulk fuel storage terminal  

E-Print Network [OSTI]

The reported hydrocarbon contamination and subsequent consultant work at a bulk fuel storage terminal has instigated the need to critically analyze modeling techniques in thin, heterogeneous, unconfined aquifers. This study provides an aquifer...

Mejia, Karl Edward

1997-01-01T23:59:59.000Z

6

,"Finished Motor Gasoline Refinery, Bulk Terminal, and Natural Gas Plant Stocks"  

U.S. Energy Information Administration (EIA) Indexed Site

Monthly","9/2013","1/15/1993" Monthly","9/2013","1/15/1993" ,"Release Date:","11/27/2013" ,"Next Release Date:","Last Week of December 2013" ,"Excel File Name:","pet_stoc_st_a_epm0f_str_mbbl_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_stoc_st_a_epm0f_str_mbbl_m.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202) 586-8800",,,"11/25/2013 11:32:19 AM" "Back to Contents","Data 1: Finished Motor Gasoline Refinery, Bulk Terminal, and Natural Gas Plant Stocks" "Sourcekey","MGFSXUS1","MGFSXP11","MGFSXCT1","MGFS3_SDE_1","MGFSXFL1","MGFSXGA1","MGFS3_SME_1","MGFS3_SMD_1","MGFSXMA1","MGFS3_SNH_1","MGFSXNJ1","MGFSXNY1","MGFSXNC1","MGFSXPA1","MGFSXRI1","MGFSXSC1","MGFS3_SVT_1","MGFSXVA1","MGFSXWV1","MGFSXP21","MGFSXIL1","MGFSXIN1","MGFSXIA1","MGFS3_SKS_1","MGFSXKY1","MGFSXMI1","MGFSXMN1","MGFSXMO1","MGFS3_SNE_1","MGFS3_SND_1","MGFSXOH1","MGFSXOK1","MGFS3_SSD_1","MGFSXTN1","MGFSXWI1","MGFSXP31","MGFSXAL1","MGFSXAR1","MGFSXLA1","MGFSXMS1","MGFSXNM1","MGFSXTX1","MGFSXP41","MGFSXCO1","MGFSXID1","MGFSXMT1","MGFSXUT1","MGFSXWY1","MGFSXP51","MGFSXAK1","MGFSXAZ1","MGFSXCA1","MGFSXHI1","MGFSXNV1","MGFSXOR1","MGFSXWA1"

7

,"Finished Motor Gasoline Refinery, Bulk Terminal, and Natural Gas Plant Stocks"  

U.S. Energy Information Administration (EIA) Indexed Site

Annual",2012,"6/30/1993" Annual",2012,"6/30/1993" ,"Release Date:","9/27/2013" ,"Next Release Date:","9/26/2014" ,"Excel File Name:","pet_stoc_st_a_epm0f_str_mbbl_a.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_stoc_st_a_epm0f_str_mbbl_a.htm" ,"Source:","Energy Information Administration" ,"For Help, Contact:","infoctr@eia.gov" ,,"(202) 586-8800",,,"11/25/2013 11:32:18 AM" "Back to Contents","Data 1: Finished Motor Gasoline Refinery, Bulk Terminal, and Natural Gas Plant Stocks" "Sourcekey","MGFSXUS1","MGFSXP11","MGFSXCT1","MGFS3_SDE_1","MGFSXFL1","MGFSXGA1","MGFS3_SME_1","MGFS3_SMD_1","MGFSXMA1","MGFS3_SNH_1","MGFSXNJ1","MGFSXNY1","MGFSXNC1","MGFSXPA1","MGFSXRI1","MGFSXSC1","MGFS3_SVT_1","MGFSXVA1","MGFSXWV1","MGFSXP21","MGFSXIL1","MGFSXIN1","MGFSXIA1","MGFS3_SKS_1","MGFSXKY1","MGFSXMI1","MGFSXMN1","MGFSXMO1","MGFS3_SNE_1","MGFS3_SND_1","MGFSXOH1","MGFSXOK1","MGFS3_SSD_1","MGFSXTN1","MGFSXWI1","MGFSXP31","MGFSXAL1","MGFSXAR1","MGFSXLA1","MGFSXMS1","MGFSXNM1","MGFSXTX1","MGFSXP41","MGFSXCO1","MGFSXID1","MGFSXMT1","MGFSXUT1","MGFSXWY1","MGFSXP51","MGFSXAK1","MGFSXAZ1","MGFSXCA1","MGFSXHI1","MGFSXNV1","MGFSXOR1","MGFSXWA1"

8

Bulk Data Movement for Climate Dataset: Efficient Data Transfer Management with Dynamic Transfer Adjustment  

E-Print Network [OSTI]

Data Movement for Climate Dataset: Efficient Data Transferbeen managing the massive dataset transfers efficiently withdistribution in climate dataset in Intergovernmental Panel

Sim, Alexander

2010-01-01T23:59:59.000Z

9

The transfer between electron bulk kinetic energy and thermal energy in collisionless magnetic reconnection  

SciTech Connect (OSTI)

By performing two-dimensional particle-in-cell simulations, we investigate the transfer between electron bulk kinetic and electron thermal energy in collisionless magnetic reconnection. In the vicinity of the X line, the electron bulk kinetic energy density is much larger than the electron thermal energy density. The evolution of the electron bulk kinetic energy is mainly determined by the work done by the electric field force and electron pressure gradient force. The work done by the electron gradient pressure force in the vicinity of the X line is changed to the electron enthalpy flux. In the magnetic island, the electron enthalpy flux is transferred to the electron thermal energy due to the compressibility of the plasma in the magnetic island. The compression of the plasma in the magnetic island is the consequence of the electromagnetic force acting on the plasma as the magnetic field lines release their tension after being reconnected. Therefore, we can observe that in the magnetic island the electron thermal energy density is much larger than the electron bulk kinetic energy density.

Lu, San; Lu, Quanming; Huang, Can; Wang, Shui [CAS Key Lab of Basic Plasma Physics, University of Science and Technology of China, Hefei 230026 (China)] [CAS Key Lab of Basic Plasma Physics, University of Science and Technology of China, Hefei 230026 (China)

2013-06-15T23:59:59.000Z

10

Adaptation and policy-based resource allocation for efficient bulk data transfers in high performance computing environments  

Science Journals Connector (OSTI)

Many science applications increasingly make use of data-intensive methods that require bulk data movement such as staging of large datasets in preparation for analysis on shared computational resources, remote access to large data sets, and data dissemination. ... Keywords: bulk data transfer, performance-based adaptation, policy-based resource allocation, resource constrained, throughput

Ann L. Chervenak, Alex Sim, Junmin Gu, Robert E. Schuler, Nandan Hirpathak

2014-11-01T23:59:59.000Z

11

Time-resolved energy transfer from single chloride-terminated nanocrystals to graphene  

SciTech Connect (OSTI)

We examine the time-resolved resonance energy transfer of excitons from single n-butyl amine-bound, chloride-terminated nanocrystals to two-dimensional graphene through time-correlated single photon counting. The radiative biexponential lifetime kinetics and blinking statistics of the individual surface-modified nanocrystal elucidate the non-radiative decay channels. Blinking modification as well as a 4× reduction in spontaneous emission were observed with the short chloride and n-butylamine ligands, probing the energy transfer pathways for the development of graphene-nanocrystal nanophotonic devices.

Ajayi, O. A., E-mail: oaa2114@columbia.edu, E-mail: cww2104@columbia.edu; Wong, C. W., E-mail: oaa2114@columbia.edu, E-mail: cww2104@columbia.edu [Optical Nanostructures Laboratory, Center for Integrated Science and Engineering, Solid-State Science and Engineering, Columbia University, New York, New York 10027 (United States); Department of Mechanical Engineering, Columbia University, New York, New York 10027 (United States); Anderson, N. C.; Wolcott, A.; Owen, J. S. [Department of Chemistry, Columbia University, New York, New York 10027 (United States); Cotlet, M. [Brookhaven National Laboratory, Upton, New York, New York 11973 (United States); Petrone, N.; Hone, J. [Department of Mechanical Engineering, Columbia University, New York, New York 10027 (United States); Gu, T.; Gesuele, F. [Optical Nanostructures Laboratory, Center for Integrated Science and Engineering, Solid-State Science and Engineering, Columbia University, New York, New York 10027 (United States)

2014-04-28T23:59:59.000Z

12

Excitonic enhancement of nonradiative energy transfer to bulk silicon with the hybridization of cascaded quantum dots  

SciTech Connect (OSTI)

We report enhanced sensitization of silicon through nonradiative energy transfer (NRET) of the excitons in an energy-gradient structure composed of a cascaded bilayer of green- and red-emitting CdTe quantum dots (QDs) on bulk silicon. Here NRET dynamics were systematically investigated comparatively for the cascaded energy-gradient and mono-dispersed QD structures at room temperature. We show experimentally that NRET from the QD layer into silicon is enhanced by 40% in the case of an energy-gradient cascaded structure as compared to the mono-dispersed structures, which is in agreement with the theoretical analysis based on the excited state population-depopulation dynamics of the QDs.

Yeltik, Aydan; Guzelturk, Burak; Akhavan, Shahab [Department of Physics and Department of Electrical and Electronics Engineering, UNAM—Institute of Materials Science and Nanotechnology, Bilkent University, Ankara 06800 (Turkey)] [Department of Physics and Department of Electrical and Electronics Engineering, UNAM—Institute of Materials Science and Nanotechnology, Bilkent University, Ankara 06800 (Turkey); Ludwig Hernandez-Martinez, Pedro; Volkan Demir, Hilmi, E-mail: volkan@stanfordalumni.org [Department of Physics and Department of Electrical and Electronics Engineering, UNAM—Institute of Materials Science and Nanotechnology, Bilkent University, Ankara 06800 (Turkey); Luminous Center of Excellence for Semiconductor Lighting and Displays, School of Electrical and Electronic Engineering and School of Physical and Mathematical Sciences, Nanyang Technological University, Nanyang Avenue, Singapore 639798 (Singapore)

2013-12-23T23:59:59.000Z

13

Evaluation of ANSI compression in a bulk data file transfer system.  

E-Print Network [OSTI]

??This report evaluates the use of a newly proposed American National Standard Institute (ANSI) standard for data compression in a bulk data transmission system. An… (more)

Chaulklin, Douglas Gary

2010-01-01T23:59:59.000Z

14

Heat transfer deterioration in tubes caused by bulk flow acceleration due to thermal and frictional influences  

SciTech Connect (OSTI)

Severe deterioration of forced convection heat transfer can be encountered with compressible fluids flowing through strongly heated tubes of relatively small bore as the flow accelerates and turbulence is reduced because of the fluid density falling (as the temperature rises and the pressure falls due to thermal and frictional influence). The model presented here throws new light on how the dependence of density on both temperature and pressure can affect turbulence and heat transfer and it explains why the empirical equations currently available for calculating effectiveness of forced convection heat transfer under conditions of strong non-uniformity of fluid properties sometimes fail to reproduce observed behaviour. It provides a criterion for establishing the conditions under which such deterioration of heat transfer might be encountered and enables heat transfer coefficients to be determined when such deterioration occurs. The analysis presented here is for a gaseous fluid at normal pressure subjected strong non-uniformity of fluid properties by the application of large temperature differences. Thus the model leads to equations which describe deterioration of heat transfer in terms of familiar parameters such as Mach number, Reynolds number and Prandtl number. It is applicable to thermal power plant systems such as rocket engines, gas turbines and high temperature gas-cooled nuclear reactors. However, the ideas involved apply equally well to fluids at supercritical pressure. Impairment of heat transfer under such conditions has become a matter of growing interest with the active consideration now being given to advanced water-cooled nuclear reactors designed to operate at pressures above the critical value. (authors)

Jackson, J. D. [Univ. of Manchester, Manchester (United Kingdom)

2012-07-01T23:59:59.000Z

15

Water transfers in Northern California : analyzing the termination of the San Francisco--Modesto Irrigation District water transfer  

E-Print Network [OSTI]

From 2011 to 2012, the Modesto Irrigation District (MID) and the San Francisco Public Utilities Commission (SFPUC) attempted to broker a deal that would transfer water from the rural Central California district to the ...

Tanner, Keith (Keith Richard)

2013-01-01T23:59:59.000Z

16

Exploring mathematical approximation for the time spans of transfer operations in parcel transshipment terminals  

Science Journals Connector (OSTI)

The parcel delivery industry (PDI) is a very labor intensive industry, from the drivers of the pickup and delivery vans, to the unloaders, sorters, and loaders in the transshipment terminals. The labor efficiency is a key performance measure in the PDI. ... Keywords: Cross-docking, Parcel delivery, Scheduling, Transportation

Douglas L. Mcwilliams; Maranda E. Mcbride

2013-01-01T23:59:59.000Z

17

A Bifunctional Copolymer Additive to Utilize Photoenergy Transfer and To Improve Hole Mobility for Organic Ternary Bulk-Heterojunction Solar Cell  

Science Journals Connector (OSTI)

A Bifunctional Copolymer Additive to Utilize Photoenergy Transfer and To Improve Hole Mobility for Organic Ternary Bulk-Heterojunction Solar Cell ... Over the past decade, organic photovoltaics (OPVs) have attracted significant attention for the production of solar energy owing to their potential advantages, such as low cost, flexibility, lightweight, large area, and simple processability. ... within the active layer blend and produce solar cells with high series resistances and low overall PCEs. ...

Cheng-Yu Chi; Ming-Chung Chen; Der-Jang Liaw; Han-Yu Wu; Ying-Chi Huang; Yian Tai

2014-07-17T23:59:59.000Z

18

Terminals and Ports Jan C. Willems  

E-Print Network [OSTI]

)+···+Vp(t)Ip(t) dt. These expressions for power and energy are not valid unless the set of terminals forms a port. We conclude that terminals are for interconnection, and ports are for energy transfer. We formulate terminals, while energy transfer happens via ports. We consider systems that interact through terminals

19

Minimizing the completion time of the transfer operations in a central parcel consolidation terminal with unequal-batch-size inbound trailers  

Science Journals Connector (OSTI)

This paper addresses the scheduling of inbound trailers to unload docks at central parcel consolidation terminals in the parcel delivery industry, an industry that operates in a time-critical environment. The scheduling function can have a significant ... Keywords: Consolidation terminals, Distribution, Genetic algorithms, Parcel, Simulation-based scheduling

Douglas L. McWilliams; Paul M. Stanfield; Christopher D. Geiger

2008-05-01T23:59:59.000Z

20

Shipboard regasification terminal  

SciTech Connect (OSTI)

Mobil Technology Company and Mobil Shipping and Transportation Company have jointly developed a new combination of existing proven equipment to regasify LNG. Advantages of this Shipboard Regasification Terminal (SRT) include accelerated initial gas delivery schedule, low capital cost, delivery of smaller quantities of LNG at a competitive price and shorter term of LNG purchase and improved financing options. These advantages benefit both the supplier of LNG and the purchaser. SRT can be used as an interim supply to developing markets allowing the demand to grow while developing downstream infrastructure. This concept does not involve offshore transfer of cryogenic fluids while delivering near-ambient temperature pipeline quality gas at typical pipeline pressures. During times when gas is not required, the SRT ship can easily be returned to the trade of transporting and delivering LNG to conventional land based terminals. This paper will discuss the merits of Shipboard Regasification Terminals in general, cover the development of this concept and review the factors guiding the use of SRT vs. an onshore terminal.

Campbell, G.; Zednik, J.

1999-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Terminal structure  

DOE Patents [OSTI]

A terminal structure (2) for a superconducting cable (1) is described. It consists of a conductor (2a) and an insulator (2b) that surrounds the conductor (2a), wherein the superconducting cable (1) has a core with a superconducting conductor (5) and a layer of insulation that surrounds the conductor (5), and wherein the core is arranged in such a way that it can move longitudinally in a cryostat. The conductor (2a) of the terminal structure (2) is electrically connected with the superconducting conductor (5) or with a normal conductor (6) that is connected with the superconducting conductor (5) by means of a tubular part (7) made of an electrically conductive material, wherein the superconducting conductor (5) or the normal conductor (6) can slide in the part (7) in the direction of the superconductor.

Schmidt, Frank (Langenhagen, DE); Allais, Arnaud (Hannover, DE); Mirebeau, Pierre (Villebon sur Yvette, FR); Ganhungu, Francois (Vieux-Reng, FR); Lallouet, Nicolas (Saint Martin Boulogne, FR)

2009-10-20T23:59:59.000Z

22

Agrobacterium tumefaciens VirC2 enhances T-DNA transfer and virulence through its C-terminal ribbon–helix–helix DNA-binding fold  

Science Journals Connector (OSTI)

...extending DNA strand separation to the nick site at the origin of transfer . Mol Microbiol...Z-score of 11.3 and a mean figure of merit of 0.37. Maximum likelihood density...phases, yielding an overall figure of merit of phasing of 0.66. Automatic building...

Jun Lu; Amke den Dulk-Ras; Paul J. J. Hooykaas; J. N. Mark Glover

2009-01-01T23:59:59.000Z

23

Hydrogeologic investigation of petrochemical contamination at a bulk storage facility  

E-Print Network [OSTI]

in 1953 and began receiving petroleum products through a pipeline in 1954. Other industrial facilities which developed in the area include Duke City Distributing, a food distributor; the Texaco Refining and Marketing bulk terminal; General Electric... in 1953 and began receiving petroleum products through a pipeline in 1954. Other industrial facilities which developed in the area include Duke City Distributing, a food distributor; the Texaco Refining and Marketing bulk terminal; General Electric...

Fryar, Dennis Gene

2012-06-07T23:59:59.000Z

24

Termination unit  

DOE Patents [OSTI]

This invention relates to a termination unit comprising an end-section of a cable. The end section of the cable defines a central longitudinal axis and comprising end-parts of N electrical phases, an end-part of a neutral conductor and a surrounding thermally insulation envelope adapted to comprising a cooling fluid. The end-parts of the N electrical phases and the end-part of the neutral conductor each comprising at least one electrical conductor and being arranged in the cable concentrically around a core former with a phase 1 located relatively innermost, and phase N relatively outermost in the cable, phase N being surrounded by the neutral conductor, electrical insulation being arrange between neighboring electrical phases and between phase N and the neutral conductor, and wherein the end-parts of the neutral conductor and the electrical phases each comprise a contacting surface electrically connected to at least one branch current lead to provide an electrical connection: The contacting surfaces each having a longitudinal extension, and being located sequentially along the longitudinal extension of the end-section of the cable. The branch current leads being individually insulated from said thermally insulation envelope by individual electrical insulators.

Traeholt, Chresten [Frederiksberg, DK; Willen, Dag [Klagshamn, SE; Roden, Mark [Newnan, GA; Tolbert, Jerry C [Carrollton, GA; Lindsay, David [Carrollton, GA; Fisher, Paul W [Heiskell, TN; Nielsen, Carsten Thidemann [Jaegerspris, DK

2014-01-07T23:59:59.000Z

25

Improving the bulk data transfer experience  

E-Print Network [OSTI]

s Hybrid Optical and Packet Infrastructure Project (HOPI)’,2005) and Hybrid Optical and Packet Infrastructure (HOPI) (

Guok, Chin

2008-01-01T23:59:59.000Z

26

Bulk Hydrogen Storage - Strategic Directions for Hydrogen Delivery Workshop  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen Hydrogen Storage Strategic Directions for Hydrogen Delivery Workshop May 7-8, 2003 Crystal City, Virginia Breakout Session - Bulk Hydrogen Storage Main Themes/Caveats Bulk Storage = Anything not on the vehicle 10's of Tons -- End use point 50-100 Tons - Terminals/City Gates 1000's Tons - Between Production Facility and Terminal/City Gate Bulk storage requirements less restrictive and different from on-board storage Uncertainty about evolution of infrastructure requires multiple pathways to be considered Bulk storage is an economic solution to address supply/demand imbalance Breakout Session - Bulk Hydrogen Storage Targets/Objectives Hard to quantify - scenario & end-use dependent Storage Materials (solid state) and container require different targets

27

Finished Motor Gasoline Refinery, Bulk Terminal, and Natural Gas Plant  

U.S. Energy Information Administration (EIA) Indexed Site

2007 2008 2009 2010 2011 2012 View 2007 2008 2009 2010 2011 2012 View History U.S. 71,470 61,525 55,254 40,534 39,717 37,768 1993-2012 PAD District 1 19,732 16,074 10,858 3,913 3,741 3,513 1993-2012 Connecticut 1993-2004 Delaware 292 105 498 1993-2009 Florida 4,484 1,877 914 586 734 747 1993-2012 Georgia 2,141 1,724 800 374 251 220 1993-2012 Maine 889 374 130 152 1993-2012 Maryland 67 31 1993-2008 Massachusetts 2 4 3 1993-2012 New Hampshire 1993-2005 New Jersey 1,982 2,956 2,026 667 275 795 1993-2012 New York 1,768 1,469 273 194 628 483 1993-2012 North Carolina 1,977 1,724 1,470 591 389 317 1993-2012 Pennsylvania 3,731 3,595 3,421 697 782 188 1993-2012 Rhode Island 1993-2005 South Carolina 839 720 787 444 276 288 1993-2012

28

Finished Motor Gasoline Refinery, Bulk Terminal, and Natural Gas Plant  

U.S. Energy Information Administration (EIA) Indexed Site

Apr-13 May-13 Jun-13 Jul-13 Aug-13 Sep-13 View Apr-13 May-13 Jun-13 Jul-13 Aug-13 Sep-13 View History U.S. 31,576 31,334 35,019 34,533 32,174 27,872 1993-2013 PAD District 1 2,286 2,947 3,296 3,722 3,755 2,837 1993-2013 Connecticut 1993-2005 Delaware 1993-2010 Florida 635 638 666 711 724 563 1993-2013 Georgia 179 213 239 277 244 191 1993-2013 Maine 126 263 324 270 310 112 1993-2013 Maryland 1993-2009 Massachusetts 7 6 7 5 8 7 1993-2013 New Hampshire 1993-2006 New Jersey 206 344 270 604 785 463 1993-2013 New York 325 455 535 508 465 521 1993-2013 North Carolina 251 387 522 535 457 320 1993-2013 Pennsylvania 116 165 232 202 234 178 1993-2013 Rhode Island 1993-2007 South Carolina 250 237 271 306 293 275 1993-2013 Vermont 20 30 19 15 24 19 1993-2013

29

Hanford ETR Bulk Vitrification System - Demonstration Bulk Vitrification  

Broader source: Energy.gov (indexed) [DOE]

Bulk Vitrification System - Demonstration Bulk Bulk Vitrification System - Demonstration Bulk Vitrification System (DBVS) Review Report Hanford ETR Bulk Vitrification System - Demonstration Bulk Vitrification System (DBVS) Review Report Full Document and Summary Versions are available for download Hanford ETR Bulk Vitrification System - Demonstration Bulk Vitrification System (DBVS) Review Report Summary - Demonstration Bulk Vitrification System (DBVS) for Low-Actvity Waste at Hanford More Documents & Publications Independent Oversight Activity Report, Hanford Waste Treatment and Immobilization Plant - November 2013 SRS Tank 48H Waste Treatment Project Technology Readiness Assessment External Technical Review for Evaluation of System Level Modeling and Simulation Tools in Support of Hanford Site Liquid Waste Process

30

E-Print Network 3.0 - activity-dependent bulk endocytosis Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

results for: activity-dependent bulk endocytosis Page: << < 1 2 3 4 5 > >> 1 VESICLE RECYCLING AT RIBBON SYNAPSES IN THE FINELY BRANCHED AXON TERMINALS OF MOUSE RETINAL BIPOLAR...

31

Bulk Hydrogen Strategic Directions for  

E-Print Network [OSTI]

Bulk Hydrogen Storage Strategic Directions for Hydrogen Delivery Workshop May 7-8, 2003 Crystal City, Virginia #12;Breakout Session - Bulk Hydrogen Storage Main Themes/Caveats Bulk Storage = Anything storage is an economic solution to address supply/demand imbalance #12;Breakout Session - Bulk Hydrogen

32

In-situ ellipsometry: Identification of surface terminations during GaN growth , T. Schmidtling1  

E-Print Network [OSTI]

1 In-situ ellipsometry: Identification of surface terminations during GaN growth C. Cobet1 , T SE, one is not limited to any special bulk or surface symmetry for optical characterisation. In PAMBE

Feenstra, Randall

33

Auctioning Bulk Mobile Messages  

Science Journals Connector (OSTI)

The search for enablers of continued growth of SMS traffic, as well as the take-off of the more diversified MMS message contents, open up for enterprises the potential of bulk use of mobile messaging, instead of essentially one-by-one use. In parallel, ... Keywords: EMS, MMS, SMS, auctions, mobile commerce, mobile operators, multi-attribute auctions

S. Meij; L. -F. Pau

2006-05-01T23:59:59.000Z

34

Termination and Recovery  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This volume defines event Termination and determination of when it is appropriate to cease emergency response activities and of associated notifications. Canceled by DOE G 151.1-4.

1997-08-21T23:59:59.000Z

35

SECURITY TERMINATION STATEMENT | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

SECURITY TERMINATION STATEMENT SECURITY TERMINATION STATEMENT Form provides an individual's statement in connection with the termination of access authorization (security...

36

Wireless Power Transfer  

ScienceCinema (OSTI)

Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the demand for EV rises. For vehicles that operate over a fixed route such as busses and shuttle vehicles, Wireless Power Transfer (WPT) means that a smaller battery pack can be used. In the traditional system, the battery pack is designed to accommodate the needs of the entire route or shift. With WPT the battery can be downsized because it can be charged when the vehicle stops on its route (a rental car shuttle bus, for example, can charge when it waits in the terminal and again when it waits at the rental car place. Thus the battery only needs enough charge to get to the next stop. This decrease in battery size means significant cost savings to electrify the vehicle. This technology enables efficient "opportunity charging stations" for predefined routes and planned stops reducing down time. Charging can occur in minutes. This improvement also eliminates the harmful emissions that occur in garages while buses are at idle during charging. In larger cities, dynamic charging offers an even greater impact utilizing existing infrastructure. As vehicles travel along busy freeways and interstate systems, wireless charging can occur while the vehicle is in motion. With this technology a vehicle essentially has unlimited electric range while using a relatively small battery pack. In-motion charging stations use vehicle sensors to alert the driver. Traveling at normal speeds, sensors establish in-motion charging. WPT transmit pads sequentially energize to the negotiated power level based on vehicle speed and its requested charging energy. Lower power when vehicle speed is slow and much higher power for faster moving vehicles. Vehicle to Infrastructure communications (V2I) coordinates WPT charging level according to on-board battery pack state-of-charge. V2I activates the roadway transmit pads placing them in standby mode and negotiates charging fee based on prevailing grid rate and vehicle energy demand. Dynamic charging would allow electricity to supply a very large fraction of the energy for the transportation sector and reduce greatly petroleum consump

None

2013-11-19T23:59:59.000Z

37

Creating bulk nanocrystalline metal.  

SciTech Connect (OSTI)

Nanocrystalline and nanostructured materials offer unique microstructure-dependent properties that are superior to coarse-grained materials. These materials have been shown to have very high hardness, strength, and wear resistance. However, most current methods of producing nanostructured materials in weapons-relevant materials create powdered metal that must be consolidated into bulk form to be useful. Conventional consolidation methods are not appropriate due to the need to maintain the nanocrystalline structure. This research investigated new ways of creating nanocrystalline material, new methods of consolidating nanocrystalline material, and an analysis of these different methods of creation and consolidation to evaluate their applicability to mesoscale weapons applications where part features are often under 100 {micro}m wide and the material's microstructure must be very small to give homogeneous properties across the feature.

Fredenburg, D. Anthony (Georgia Institute of Technology, Atlanta, GA); Saldana, Christopher J. (Purdue University, West Lafayette, IN); Gill, David D.; Hall, Aaron Christopher; Roemer, Timothy John (Ktech Corporation, Albuquerque, NM); Vogler, Tracy John; Yang, Pin

2008-10-01T23:59:59.000Z

38

Bulk Heterojunction Polymer Solar Cells  

Science Journals Connector (OSTI)

Recent developments on bulk-heterojunction polymer photovoltaic diodes will be presented, focusing on the mechanism of charge generation, low bandgap polymers for increased photon...

Janssen, René

39

Section 5 -Termination of Occupancy A. Involuntary Termination of Occupancy  

E-Print Network [OSTI]

Section 5 - Termination of Occupancy A. Involuntary Termination of Occupancy 1. Housing and Dining number of credits at UAA as stipulated in Section 2 - Eligibility, and for non-payment of Housing charges. 2. The University may terminate this agreement without cause with ten days written notice. 3

Pantaleone, Jim

40

Identification of the vanadyl terminated V2O3(0001) surface by NEXAFS spectroscopy: A combined theoretical  

E-Print Network [OSTI]

Identification of the vanadyl terminated V2O3(0001) surface by NEXAFS spectroscopy: A combined the structure and the physical/chemical properties of bulk V2O3 have been studied extensively both by theory by experiment [16]. Rhombohedral V2O3 bulk crystals are described along their (0001) direction by stacking

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Propionic-Acid-Terminated Silicon Nanoparticles: Synthesis and Optical Characterization  

E-Print Network [OSTI]

producing water-dispersible, propionic-acid-terminated particles. From transmission electron microscope (TEM oxidation of the nanocrystals. The silicon nanocrystals could be transferred into water or methanol in acrylic acid, water, and methanol and showed essentially the same optical properties in all three solvents

Swihart, Mark T.

42

bulk power | OpenEI  

Open Energy Info (EERE)

bulk power bulk power Dataset Summary Description The Form EIA-411, "Coordinated Bulk Power Supply Program Report," collects information from the Nation's power system planners about the electricity supply, both capacity and energy, that is needed to serve current demand and for future growth. Source Energy Information Administration (EIA) Date Released December 03rd, 2010 (3 years ago) Date Updated December 03rd, 2010 (3 years ago) Keywords bulk power EIA Electricity Generation Data application/vnd.ms-excel icon Net Energy for Load - Historic, Actual and Projected Five-Years (xls, 26.1 KiB) application/vnd.ms-excel icon Noncoincident Peak Load - Historic, Actual and Projected Five-Years (xls, 25.6 KiB) application/vnd.ms-excel icon Noncoincident Peak Load - Historic, Actual and Projected Five-Years (xls, 0 bytes)

43

Bulk Hauling Equipment for CHG  

Broader source: Energy.gov (indexed) [DOE]

load of CHG Semitrailer Mass Trailer or ModuleChassis Module Mass Hydrogen Gas Mass CAPITAL EXPENDITURE FOR BULK HAULING EQUIPMENT For large consumption, total CapEx for...

44

Properties of the termination shock observed by Voyager 2 and J. D. Richardson3  

E-Print Network [OSTI]

to the thermal ions downstream of the termination shock, probably due to the fact that most of the solar wind energy is transferred to the pickup ions. Citation: Li, H., C. Wang, and J. D. Richardson (2008

Richardson, John

45

Bulk Viscosity of Interacting Hadrons  

E-Print Network [OSTI]

We show that first approximations to the bulk viscosity $\\eta_v$ are expressible in terms of factors that depend on the sound speed $v_s$, the enthalpy, and the interaction (elastic and inelastic) cross section. The explicit dependence of $\\eta_v$ on the factor $(\\frac 13 - v_s^2)$ is demonstrated in the Chapman-Enskog approximation as well as the variational and relaxation time approaches. The interesting feature of bulk viscosity is that the dominant contributions at a given temperature arise from particles which are neither extremely nonrelativistic nor extremely relativistic. Numerical results for a model binary mixture are reported.

A. Wiranata; M. Prakash

2009-06-30T23:59:59.000Z

46

Charm contribution to bulk viscosity  

E-Print Network [OSTI]

In the range of temperatures reached in future heavy ion collision experiments, hadronic pair annihilations and creations of charm quarks may take place within the lifetime of the plasma. As a result, charm quarks may increase the bulk viscosity affecting the early stages of hydrodynamic expansion. Assuming thermalization, we estimate the charm contribution to bulk viscosity within the same effective kinetic theory framework in which the light parton contribution has been computed previously. The time scale at which this physics becomes relevant is related to the width of the transport peak associated with the trace anomaly correlator, and is found to be 600 MeV.

Laine, M

2014-01-01T23:59:59.000Z

47

Charm contribution to bulk viscosity  

E-Print Network [OSTI]

In the range of temperatures reached in future heavy ion collision experiments, hadronic pair annihilations and creations of charm quarks may take place within the lifetime of the plasma. As a result, charm quarks may increase the bulk viscosity affecting the early stages of hydrodynamic expansion. Assuming thermalization, we estimate the charm contribution to bulk viscosity within the same effective kinetic theory framework in which the light parton contribution has been computed previously. The time scale at which this physics becomes relevant is related to the width of the transport peak associated with the trace anomaly correlator, and is found to be 600 MeV.

M. Laine; Kiyoumars A. Sohrabi

2014-10-24T23:59:59.000Z

48

Bulk viscosity and deflationary universes  

E-Print Network [OSTI]

We analyze the conditions that make possible the description of entropy generation in the new inflationary model by means of a nearequilibrium process. We show that there are situations in which the bulk viscosity cannot describe particle production during the coherent field oscillations phase.

J. A. S. Lima; R. Portugal; I. Waga

2007-08-24T23:59:59.000Z

49

Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Transfer Since 1974, the Federal Laboratory Consortium (FLC) Award for Excellence in Technology Transfer has recognized scientists and engineers at federal government...

50

MOBILE-TERMINATED DATA User's Guide  

E-Print Network [OSTI]

MOBILE-TERMINATED DATA User's Guide Iridium Satellite LLC Rev. 2; February 1, 2002 #12;MOBILE................................................................................................................................3 1.1 IRIDIUM MOBILE TERMINATED DATA CONNECTIVITY ..........................................................................................................................7 4 Mobile Terminated Call Scenarios

Ashley, Michael C. B.

51

Bulk Hauling Equipment for CHG  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

BULK HAULING EQUIPMENT FOR CHG BULK HAULING EQUIPMENT FOR CHG Don Baldwin Director of Product Development - Hexagon Lincoln HEXAGON LINCOLN TITAN(tm) Module System Compressed Hydrogen Gas * Capacity 250 bar - 616 kg 350 bar - 809 kg 540 bar - 1155 kg * Gross Vehicle Weight (with prime mover) 250 bar - 28 450 kg 350 bar - 30 820 kg 540 bar - 39 440 kg * Purchase Cost 250 bar - $510,000 350 bar - $633,750 540 bar - $1,100,000 Compressed Natural Gas * Capacity (250 bar at 15 C) - 7412 kg * GVW (With prime mover) - 35 250 kg * Purchase Cost (+/- 5%) - $510,000 HEXAGON LINCOLN TITAN(tm) V Magnum Trailer System Compressed Hydrogen Gas * Capacity 250 bar - 800 kg 350 bar - 1050 kg 540 bar - 1500 kg * Gross Vehicle Weight (with prime mover) 250 bar - 31 000 kg 350 bar - 34 200 kg 540 bar - 45 700 kg * Purchase Cost (+/-

52

Bulk viscosity in hybrid stars  

Science Journals Connector (OSTI)

We compute the bulk viscosity of a mixed quark-hadron phase. In the first scenario to be discussed, the mixed phase occurs at large densities and we assume that it is composed of a mixing of hyperonic matter and quarks in the Color Flavor Locked phase. In a second scenario, the mixed phase occurs at lower densities and it is composed of a mixing of nucleons and unpaired quark matter. We have also investigated the effect of a nonvanishing surface tension at the interface between hadronic and quark matter. In both scenarios, the bulk viscosity is large when the surface tension is absent, while the value of the viscosity reduces in the second scenario when a finite value for the surface tension is taken into account. In all cases, the r-mode instabilities of the corresponding hybrid star are suppressed.

A. Drago; A. Lavagno; G. Pagliara

2005-05-16T23:59:59.000Z

53

Properties of Bulk Sintered Silver As a Function of Porosity  

SciTech Connect (OSTI)

This report summarizes a study where various properties of bulk-sintered silver were investigated over a range of porosity. This work was conducted within the National Transportation Research Center's Power Device Packaging project that is part of the DOE Vehicle Technologies Advanced Power Electronics and Electric Motors Program. Sintered silver, as an interconnect material in power electronics, inherently has porosity in its produced structure because of the way it is made. Therefore, interest existed in this study to examine if that porosity affected electrical properties, thermal properties, and mechanical properties because any dependencies could affect the intended function (e.g., thermal transfer, mechanical stress relief, etc.) or reliability of that interconnect layer and alter how its performance is modeled. Disks of bulk-sintered silver were fabricated using different starting silver pastes and different sintering conditions to promote different amounts of porosity. Test coupons were harvested out of the disks to measure electrical resistivity and electrical conductivity, thermal conductivity, coefficient of thermal expansion, elastic modulus, Poisson's ratio, and yield stress. The authors fully recognize that the microstructure of processed bulk silver coupons may indeed not be identical to the microstructure produced in thin (20-50 microns) layers of sintered silver. However, measuring these same properties with such a thin actual structure is very difficult, requires very specialized specimen preparation and unique testing instrumentation, is expensive, and has experimental shortfalls of its own, so the authors concluded that the herein measured responses using processed bulk sintered silver coupons would be sufficient to determine acceptable values of those properties. Almost all the investigated properties of bulk sintered silver changed with porosity content within a range of 3-38% porosity. Electrical resistivity, electrical conductivity, thermal conductivity, elastic modulus, Poisson's ratio, and yield stress all depended on the porosity content in bulk-sintered silver. The only investigated property that was independent of porosity in that range was coefficient of thermal expansion.

Wereszczak, Andrew A [ORNL; Vuono, Daniel J [ORNL; Wang, Hsin [ORNL; Ferber, Mattison K [ORNL; Liang, Zhenxian [ORNL

2012-06-01T23:59:59.000Z

54

Transferring Data  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transferring Data Transferring Data to and from NERSC Yushu Yao 1 Tuesday, March 8, 2011 Overview 2 * Structure of NERSC Systems and Disks * Data Transfer Nodes * Transfer Data from/to NERSC - scp/sftp - bbcp - GridFTP * Sharing Data Within NERSC Tuesday, March 8, 2011 Systems and Disks 3 System Hopper Franklin Carver Euclid Data Transfer Node PDSF Global Home ($HOME) Global Scratch ($GSCRATCH) Project Directory Local Non-shared Scratch Data transfer nodes can access most of the disks, suggested for transferring data in/out NERSC Tuesday, March 8, 2011 Data Transfer Nodes * Two Servers Available Now: - dtn01.nersc.gov and dtn02.nersc.gov - Accessible by all NERSC users * Designed to Transfer Data: - High speed connection to HPSS and NGF (Global Home, Project, and Global Scratch) - High speed ethernet to wide area network

55

Diffusive shielding stabilizes bulk nanobubble clusters  

E-Print Network [OSTI]

Using molecular dynamics, we study the nucleation and stability of bulk nanobubble clusters. We study the formation, growth, and final size of bulk nanobubbles. We find that, as long as the bubble-bubble interspacing is small enough, bulk nanobubbles are stable against dissolution. Simple diffusion calculations provide an excellent match with the simulation results, giving insight into the reason for the stability: nanobubbles in a cluster of bulk nanobubbles "protect" each other from diffusion by a shielding effect.

Weijs, Joost H; Lohse, D

2011-01-01T23:59:59.000Z

56

Distillate Fuel Oil Refinery, Bulk Terminal, and Natural Gas Plant Stocks  

Gasoline and Diesel Fuel Update (EIA)

May-13 Jun-13 Jul-13 Aug-13 Sep-13 Oct-13 View May-13 Jun-13 Jul-13 Aug-13 Sep-13 Oct-13 View History U.S. 91,312 93,175 97,872 97,384 98,180 87,471 1993-2013 PAD District 1 27,017 30,786 32,127 33,208 33,382 29,157 1993-2013 Connecticut 1,014 1,154 1,120 1,502 1,791 1,688 1993-2013 Delaware 560 578 385 599 686 319 1993-2013 District of Columbia 1993-2004 Florida 1,990 2,023 2,226 2,051 2,270 1,838 1993-2013 Georgia 1,192 1,278 1,161 1,174 1,257 1,003 1993-2013 Maine 1,180 1,147 1,033 969 1,076 1,200 1993-2013 Maryland 822 1,446 1,543 1,592 1,506 940 1993-2013 Massachusetts 1,258 1,358 1,615 1,490 1,827 2,066 1993-2013 New Hampshire 239 238 224 158 254 542 1993-2013 New Jersey 6,805 8,676 9,534 10,341 9,576 7,169 1993-2013 New York 2,734 3,650 3,433 4,141 3,783 3,601 1993-2013

57

U.S. Refinery, Bulk Terminal, and Natural Gas Plant Stocks of Selected  

U.S. Energy Information Administration (EIA) Indexed Site

Area: U.S. PAD District 1 Connecticut Delaware District of Columbia Florida Georgia Maine Maryland Massachusetts New Hampshire New Jersey New York North Carolina Pennsylvania Rhode Island South Carolina Vermont Virginia West Virginia PAD District 2 Illinois Indiana Iowa Kansas Kentucky Michigan Minnesota Missouri Nebraska North Dakota Ohio Oklahoma South Dakota Tennessee Wisconsin PAD District 3 Alabama Arkansas Louisiana Mississippi New Mexico Texas PAD District 4 Colorado Idaho Montana Utah Wyoming PAD District 5 Alaska Arizona California Hawaii Nevada Oregon Washington Period-Unit: Monthly-Thousand Barrels Annual-Thousand Barrels

58

Storage sharing at import dry-bulk terminals: a case study at Gadani Energy Park:.  

E-Print Network [OSTI]

??The Gadani Energy Park is a to-be build project in which ten coal-fired power plants are established at one location near the shore of Karachi,… (more)

Van den Brand, S.

2015-01-01T23:59:59.000Z

59

Termination-Insensitive Computational Indistinguishability  

E-Print Network [OSTI]

indistinguishability: termination-insensitive computational indistinguishability (tic-indistinguishability). Tic in a formula will provide information on its definition. Try it and click here: M tic. (On slower computers. Contents 1 Introduction 2 1.1 Defining tic-indistinguishability 3 1.2 Machine model independence 5 1

60

RAPID/BulkTransmission/Siting/California | Open Energy Information  

Open Energy Info (EERE)

Information Desktop Toolkit BETA RAPID Toolkit About Bulk Transmission Geothermal Solar Resources Contribute Contact Us RAPID Bulk Transmission Siting California Bulk...

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Bulk Hydrogen Storage - Strategic Directions for Hydrogen Delivery...  

Broader source: Energy.gov (indexed) [DOE]

Bulk Hydrogen Storage Strategic Directions for Hydrogen Delivery Workshop May 7-8, 2003 Crystal City, Virginia Breakout Session - Bulk Hydrogen Storage Main ThemesCaveats Bulk...

62

RAPID/BulkTransmission/Power Plant | Open Energy Information  

Open Energy Info (EERE)

BulkTransmissionPower Plant < RAPID | BulkTransmission Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA RAPID Toolkit About Bulk...

63

Real-time Fluorescent Resonance Energy Transfer Analysis to Monitor Drug Resistance in Chronic Myelogenous Leukemia  

Science Journals Connector (OSTI)

...NH2-terminal YFP (yellow mutant of green fluorescent protein) and a COOH-terminal CFP (cyan mutant of green fluorescent protein). However...conformation change and yielding an energy transfer from CFP to YFP. To...pair of fluorescent resonance energy transfer-based probes for...

Ahmet Tunceroglu; Michiyuki Matsuda; and Raymond B. Birge

2010-11-01T23:59:59.000Z

64

Nanofluidics, from bulk to interfaces  

E-Print Network [OSTI]

Nanofluidics has emerged recently in the footsteps of microfluidics, following the quest of scale reduction inherent to nanotechnologies. By definition, nanofluidics explores transport phenomena of fluids at the nanometer scales. Why is the nanometer scale specific ? What fluid properties are probed at nanometric scales ? In other words, why 'nanofluidics' deserves its own brand name ? In this critical review, we will explore the vast manifold of length scales emerging for the fluid behavior at the nanoscales, as well as the associated mechanisms and corresponding applications. We will in particular explore the interplay between bulk and interface phenomena. The limit of validity of the continuum approaches will be discussed, as well as the numerous surface induced effects occuring at these scales, from hydrodynamic slippage to the various electro-kinetic phenomena originating from the couplings between hydrodynamics and electrostatics. An enlightening analogy between ion transport in nanochannels and transport in doped semi-conductors will be discussed.

Lyderic Bocquet; Elisabeth Charlaix

2009-09-03T23:59:59.000Z

65

DOE Terminated Federal Advisory Committees  

Broader source: Energy.gov (indexed) [DOE]

TERMINATED FEDERAL ADVISORY COMMITTEES Date Committee Name/Web Site Terminated Federal Energy Management Advisory Committee 06/08/07 Web Site: (Environmental Management Site-Specific Advisory Board) Fernald 09/30/06 Web Site: (Environmental Management Site-Specific Advisory Board) Rocky Flats 09/30/06 Web Site: Secretary of Energy Advisory Board 05/20/06 Web Site: http://www.seab.energy.gov/ Electricity Advisory Board 02/10/06 Web Site: http://www.eab.doe.gov/ American Statistical Association Advisory Committee on Energy Statistics 03/24/05 Web Site: Workers' Compensation Assistance Advisory Committee 06/29/04 Web Site: National Nuclear Security Administration Advisory Committee 06/25/03 Web Site: Commission on Fire Safety and Preparedness 01/09/03

66

Clothes Dryer Automatic Termination Evaluation  

SciTech Connect (OSTI)

Volume 2: Improved Sensor and Control Designs Many residential clothes dryers on the market today provide automatic cycles that are intended to stop when the clothes are dry, as determined by the final remaining moisture content (RMC). However, testing of automatic termination cycles has shown that many dryers are susceptible to over-drying of loads, leading to excess energy consumption. In particular, tests performed using the DOE Test Procedure in Appendix D2 of 10 CFR 430 subpart B have shown that as much as 62% of the energy used in a cycle may be from over-drying. Volume 1 of this report shows an average of 20% excess energy from over-drying when running automatic cycles with various load compositions and dryer settings. Consequently, improving automatic termination sensors and algorithms has the potential for substantial energy savings in the U.S.

TeGrotenhuis, Ward E.

2014-10-01T23:59:59.000Z

67

Stillwell Avenue Terminal Train Shed  

High Performance Buildings Database

New York, NY Coney Island's Stillwell Avenue Terminal is the largest above-ground station in New York City's subway system. After years of deferred maintenance, the 90-year-old station was redesigned by New York City Transit's in-house design staff. The train shed's new arched-truss structure covers four platforms and eight tracks. The train shed was designed to meet demanding maintenance, durability, and operations requirements.

68

Synthesis and Characterization of Bulk Vitreous Cadmium Germanium...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Bulk Vitreous Cadmium Germanium Arsenide. Synthesis and Characterization of Bulk Vitreous Cadmium Germanium Arsenide. Abstract: Abstract Cadmium-germanium-diarsenide...

69

Bulk viscosity of a pion gas  

Science Journals Connector (OSTI)

We compute the bulk viscosity of a gas of pions at temperatures below the QCD crossover temperature, for the physical value of m?, to lowest order in chiral perturbation theory. Bulk viscosity is controlled by number-changing processes which become exponentially slow at low temperatures when the pions become exponentially dilute, leading to an exponentially large bulk viscosity ?~(F08/m?5)exp(2m?/T), where F0?93?MeV is the pion decay constant.

Egang Lu and Guy D. Moore

2011-04-07T23:59:59.000Z

70

Hyperon bulk viscosity in strong magnetic fields  

SciTech Connect (OSTI)

We study the bulk viscosity of neutron star matter including {lambda} hyperons in the presence of quantizing magnetic fields. Relaxation time and bulk viscosity due to both the nonleptonic weak process involving {lambda} hyperons and direct Urca processes are calculated here. In the presence of a strong magnetic field of 10{sup 17} G, the hyperon bulk viscosity coefficient is reduced, whereas bulk viscosity coefficients due to direct Urca processes are enhanced compared with their field free cases when many Landau levels are populated by protons, electrons, and muons.

Sinha, Monika; Bandyopadhyay, Debades [Theory Division and Centre for Astroparticle Physics, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata-700064 (India)

2009-06-15T23:59:59.000Z

71

Bulk viscosity in kaon condensed matter  

E-Print Network [OSTI]

We investigate the effect of $K^-$ condensed matter on bulk viscosity and r-mode instability in neutron stars. The bulk viscosity coefficient due to the non-leptonic process $n \\rightleftharpoons p + K^-$ is studied here. In this connection, equations of state are constructed within the framework of relativistic field theoretical models where nucleon-nucleon and kaon-nucleon interactions are mediated by the exchange of scalar and vector mesons. We find that the bulk viscosity coefficient due to the non-leptonic weak process in the condensate is suppressed by several orders of magnitude. Consequently, kaon bulk viscosity may not damp the r-mode instability in neutron stars.

Debarati Chatterjee; Debades Bandyopadhyay

2007-02-09T23:59:59.000Z

72

Oxygen penetration into the bulk of palladium  

Science Journals Connector (OSTI)

Oxygen penetration into the bulk of palladium ... During heating, the reaction rate exhibited an activity maximum at 650 K, whereas no activity maximum was found during the ... ...

C. T. Campbell; D. C. Foyt; J. M. White

1977-01-01T23:59:59.000Z

73

Commercialization of Bulk Thermoelectric Materials for Power...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Publications Commercialization of Bulk Thermoelectric Materials for Power Generation Hydrogen Embrittlement of Pipeline Steels: Causes and Remediation Distributed Bio-Oil...

74

Nanostructured High Temperature Bulk Thermoelectric Energy Conversion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Efficient Automotive Waste Heat Recovery Multi-physics modeling of thermoelectric generators for waste heat recovery applications Nanostructured High-Temperature Bulk...

75

Applications of bulk high-temperature superconductors  

SciTech Connect (OSTI)

The development of high-temperature superconductors (HTSs) can be broadly generalized into thin-film electronics, wire applications, and bulk applications. We consider bulk HTSs to include sintered or crystallized forms that do not take the geometry of filaments or tapes, and we discuss major applications for these materials. For the most part applications may be realized with the HTSs cooled to 77 K, and the properties of the bulk HTSs are often already sufficient for commercial use. A non-exhaustive list of applications for bulk HTSs includes trapped field magnets, hysteresis motors, magnetic shielding, current leads, and magnetic bearings. These applications are briefly discussed in this paper.

Hull, J.R.

1995-06-01T23:59:59.000Z

76

Recent Device Developments with Advanced Bulk Thermoelectric...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

at RTI Reviews work in engineered thin-film nanoscale thermoelectric materials and nano-bulk materials with high ZT undertaken by RTI in collaboration with its research...

77

Displacement Transfer Zone | Open Energy Information  

Open Energy Info (EERE)

Displacement Transfer Zone Displacement Transfer Zone Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Displacement Transfer Zone Dictionary.png Displacement Transfer Zone: Displacement transfer zones facilitate the transfer of strain between normal and strike-slip faults. Intersections between strike-slip faults in the Walker Lane and N- to NNE-striking normal faults commonly host geothermal systems, focused along the normal faults proximal to their dilational intersections with nearby strike-slip faults. Other definitions:Wikipedia Reegle Controlling Structures List of controlling structures typically associated with geothermal systems: Major Normal Fault Termination of a Major Normal Fault Stepover or Relay Ramp in Normal Fault Zones Apex or Salient of Normal Fault

78

Linear Kinetic Heat Transfer: Moment Equations, Boundary Conditions, and Knudsen  

E-Print Network [OSTI]

] and phonons [6], and the radiative transfer equation [7]. The solution of any kinetic equation is usually][25], radiative transfer [7][26], and phonon transport in crystals [6]. Despite the long history, and success method, and the methods employed in [18][19][20], are based solely on the transport equations in the bulk, and

Struchtrup, Henning

79

Bulk viscosity of a pion gas  

SciTech Connect (OSTI)

We compute the bulk viscosity of a gas of pions at temperatures below the QCD crossover temperature, for the physical value of m{sub {pi}}, to lowest order in chiral perturbation theory. Bulk viscosity is controlled by number-changing processes which become exponentially slow at low temperatures when the pions become exponentially dilute, leading to an exponentially large bulk viscosity {zeta}{approx}(F{sub 0}{sup 8}/m{sub {pi}}{sup 5})exp(2m{sub {pi}}/T), where F{sub 0}{approx_equal}93 MeV is the pion decay constant.

Lu Egang; Moore, Guy D. [Department of Physics, McGill University, 3600 rue University, Montreal, Quebec, H3A 2T8 (Canada)

2011-04-15T23:59:59.000Z

80

The Bulk Viscosity of a Pion Gas  

E-Print Network [OSTI]

We compute the bulk viscosity of a gas of pions at temperatures below the QCD crossover temperature, for the physical value of pion mass, to lowest order in chiral perturbation theory. Bulk viscosity is controlled by number-changing processes which become exponentially slow at low temperatures when the pions become exponentially dilute, leading to an exponentially large bulk viscosity zeta ~ (F_0^8/m_\\pi^5) exp(2m_\\pi/T), where F_0 = 93 MeV is the pion decay constant.

Egang Lu; Guy D. Moore

2011-01-31T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Definition: Bulk Electric System | Open Energy Information  

Open Energy Info (EERE)

Bulk Electric System Bulk Electric System Jump to: navigation, search Dictionary.png Bulk Electric System As defined by the Regional Reliability Organization, the electrical generation resources, transmission lines, interconnections with neighboring systems, and associated equipment, generally operated at voltages of 100 kV or higher. Radial transmission facilities serving only load with one transmission source are generally not included in this definition.[1] Related Terms Regional Reliability Organization, transmission lines, transmission line References ↑ Glossary of Terms Used in Reliability Standards An in LikeLike UnlikeLike You like this.Sign Up to see what your friends like. line Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Bulk_Electric_System&oldid=48030

82

Bulk Viscosity of a Pion Gas  

SciTech Connect (OSTI)

We calculate the bulk viscosity of a pion gas at low energies within the kinetic theory approach and show the importance of dealing properly with the zero modes of this transport coefficient.

Dobado, Antonio; Torres-Rincon, Juan M. [Dpto. Fisica Teorica I, Universidad Complutense de Madrid, 28040 Madrid (Spain)

2011-05-23T23:59:59.000Z

83

Effects of bulk viscosity at freezeout  

SciTech Connect (OSTI)

We investigate particle spectra and elliptic flow coefficients in relativistic heavy-ion collisions by taking into account the distortion of phase space distributions by bulk viscosity at freezeout. We first calculate the distortion of phase space distributions in a multicomponent system with Grad's 14-moment method. We find some subtle issues when macroscopic variables are matched with microscopic momentum distributions in a multicomponent system, and we develop a consistent procedure to uniquely determine the corrections to the phase space distributions. Next, we calculate particle spectra by using the Cooper-Frye formula to see the effect of the bulk viscosity. Despite the relative smallness of the bulk viscosity, we find that it is likely to have a visible effect on particle spectra and elliptic flow coefficients. This indicates the importance of taking into account bulk viscosity together with shear viscosity to constrain the transport coefficients with better accuracy from comparison with experimental data.

Monnai, Akihiko; Hirano, Tetsufumi [Department of Physics, University of Tokyo, Tokyo 113-0033 (Japan)

2009-11-15T23:59:59.000Z

84

Inorganic Nanocrystal Bulk Heterojunctions - Energy Innovation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

This Technology

Schematic illustration of a nanocrystal bulk heterojunction solar cell with an active layer in which the concentration of n-type and p-type nanocrystals is...

85

Texas Bulk Power Study-- An Overview  

E-Print Network [OSTI]

TEXAS BULK POWER STUDY -- AN OVERVIEW BIll MOORE Economist Publ ic Utility Commission of Texas Austin, Texas ABSTRACT In the 1980' s, several signi ficant changes have evolved in markets for electric power in Texas. Cogeneration, fuel... of bulk power transactions may reduce some uncertainty and result in cost savings to the util ities involved. However, both the transactions potential and any corresponding changes in operating costs are quite sensitive to assumptions about the price...

Moore, B.

86

Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy Efficiency & Renewable and Energy - Commercialization Energy Efficiency & Renewable and Energy - Commercialization Deployment SBIR/STTR - Small Business Innovation Research and Small Business Technology Transfer USEFUL LINKS Contract Opportunities: FBO.gov FedConnect.net Grant Opportunities DOE Organization Chart Association of University Technology Managers (AUTM) Federal Laboratory Consortium (FLC) Feedback Contact us about Tech Transfer: Mary.McManmon@science.doe.gov Mary McManmon, 202-586-3509 link to Adobe PDF Reader link to Adobe Flash player Licensing Guide and Sample License The Technology Transfer Working Group (TTWG), made up of representatives from each DOE Laboratory and Facility, recently created a Licensing Guide and Sample License [762-KB PDF]. The Guide will serve to provide a general understanding of typical contract terms and provisions to help reduce both

87

RAPID/BulkTransmission/Land Access | Open Energy Information  

Open Energy Info (EERE)

Information Desktop Toolkit BETA RAPID Toolkit About Bulk Transmission Geothermal Solar Tools Contribute Contact Us RAPID Bulk Transmission Land Access Regulatory...

88

RAPID/BulkTransmission/Siting/New Mexico | Open Energy Information  

Open Energy Info (EERE)

Solar Resources Contribute Contact Us RAPID Bulk Transmission Siting New Mexico Bulk Transmission Siting in New Mexico Regulatory Information Overviews Search for...

89

High Heat Flux Thermoelectric Module Using Standard Bulk Material...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Heat Flux Thermoelectric Module Using Standard Bulk Material High Heat Flux Thermoelectric Module Using Standard Bulk Material Presents high heat flux thermoelectric module design...

90

RAPID/Overview/BulkTransmission/Siting/Colorado | Open Energy...  

Open Energy Info (EERE)

Colorado < RAPID | Overview | BulkTransmission | Siting(Redirected from RAPIDAtlasBulkTransmissionSitingColorado) Redirect page Jump to: navigation, search REDIRECT...

91

Bulk Hydrogen Storage - Strategic Directions for Hydrogen Delivery...  

Broader source: Energy.gov (indexed) [DOE]

Bulk Hydrogen Storage - Strategic Directions for Hydrogen Delivery Workshop Bulk Hydrogen Storage - Strategic Directions for Hydrogen Delivery Workshop Targets, barriers and...

92

Nanostructured High-Temperature Bulk Thermoelectric Energy Conversion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Nanostructured High-Temperature Bulk Thermoelectric Energy Conversion for Efficient Automotive Waste Heat Recovery Nanostructured High-Temperature Bulk Thermoelectric Energy...

93

The influence of molecular orientation on organic bulk heterojunction...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The influence of molecular orientation on organic bulk heterojunction solar cells The influence of molecular orientation on organic bulk heterojunction solar cells Print Monday, 28...

94

RAPID/BulkTransmission/Water Use | Open Energy Information  

Open Energy Info (EERE)

RAPIDBulkTransmissionWater Use < RAPID | BulkTransmission Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA RAPID Toolkit About Bulk...

95

4 - Bulk high temperature superconductor (HTS) materials  

Science Journals Connector (OSTI)

Abstract: This chapter concentrates on bulk materials. A bulk superconductor is one in which the superconductor has been formed into a lump, usually cylindrically shaped, but can also be hexagonal, rectangular or even square. Bulk superconductors are typically 3–5 cm across and 1 cm thick. They have many uses but the principal one is as extremely compact high-field permanent magnets in superconducting machines. A 2.6 cm (RE)BCO puck has been magnetised to 17.24 T: this is an order of magnitude greater than the flux density available from a conventional permanent magnet. This chapter describes the materials, manufacturing process, magnetisation process and some examples of machines.

T. Coombs

2012-01-01T23:59:59.000Z

96

Electron Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 3 Pierre Kennepohl1,2 and Edward Solomon1* 1Department of Chemistry, Stanford University, Stanford, CA 94305 Electron transfer, or the act of moving an electron from one place to another, is amongst the simplest of chemical processes, yet certainly one of the most critical. The process of efficiently and controllably moving electrons around is one of the primary regulation mechanisms in biology. Without stringent control of electrons in living organisms, life could simply not exist. For example, photosynthesis and nitrogen fixation (to name but two of the most well-known biochemical activities) are driven by electron transfer processes. It is unsurprising, therefore, that much effort has been placed on understanding the fundamental principles that control and define the simple act of adding and/or removing electrons from chemical species.

97

TECHNOLOGY TRANSFER  

Broader source: Energy.gov (indexed) [DOE]

404-NOV. 1, 2000 404-NOV. 1, 2000 TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 VerDate 11-MAY-2000 04:52 Nov 16, 2000 Jkt 089139 PO 00000 Frm 00001 Fmt 6579 Sfmt 6579 E:\PUBLAW\PUBL404.106 APPS27 PsN: PUBL404 114 STAT. 1742 PUBLIC LAW 106-404-NOV. 1, 2000 Public Law 106-404 106th Congress An Act To improve the ability of Federal agencies to license federally owned inventions. Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled, SECTION 1. SHORT TITLE. This Act may be cited as the ''Technology Transfer Commer- cialization Act of 2000''. SEC. 2. FINDINGS. The Congress finds that- (1) the importance of linking our unparalleled network of over 700 Federal laboratories and our Nation's universities with United States industry continues to hold great promise

98

NETL: Tech Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Licensing & Technology Transfer Available Technologies Partnerships and Licensing Success Stories Contact Us Technology transfer is the process of transferring new technologies...

99

Accelerating the transfer in Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Accelerating the transfer in Technology Transfer Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: Dec. 2014 - Jan. 2015...

100

Bulk viscosity in a cold CFL superfluid  

E-Print Network [OSTI]

We compute one of the bulk viscosity coefficients of cold CFL quark matter in the temperature regime where the contribution of mesons, quarks and gluons to transport phenomena is Boltzmann suppressed. In that regime dissipation occurs due to collisions of superfluid phonons, the Goldstone modes associated to the spontaneous breaking of baryon symmetry. We first review the hydrodynamics of relativistic superfluids, and remind that there are at least three bulk viscosity coefficients in these systems. We then compute the bulk viscosity coefficient associated to the normal fluid component of the superfluid. In our analysis we use Son's effective field theory for the superfluid phonon, amended to include scale breaking effects proportional to the square of the strange quark mass m_s. We compute the bulk viscosity at leading order in the scale breaking parameter, and find that it is dominated by collinear splitting and joining processes. The resulting transport coefficient is zeta=0.011 m_s^4/T, growing at low temperature T until the phonon fluid description stops making sense. Our results are relevant to study the rotational properties of a compact star formed by CFL quark matter.

Cristina Manuel; Felipe Llanes-Estrada

2007-05-26T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Termination of a Major Normal Fault | Open Energy Information  

Open Energy Info (EERE)

Termination of a Major Normal Fault: Major normal fault terminations or tip-lines sometimes split into multiple closely-spaced faults that result in increased...

102

Bulk viscosity in heavy ion collision  

E-Print Network [OSTI]

The effect of a temperature dependent bulk viscosity to entropy density ratio~($\\zeta/s$) along with a constant shear viscosity to entropy density ratio~($\\eta/s$) on the space time evolution of the fluid produced in high energy heavy ion collisions have been studied in a relativistic viscous hydrodynamics model. The boost invariant Israel-Stewart theory of causal relativistic viscous hydrodynamics is used to simulate the evolution of the fluid in 2 spatial and 1 temporal dimension. The dissipative correction to the freezeout distribution for bulk viscosity is calculated using Grad's fourteen moment method. From our simulation we show that the method is applicable only for $\\zeta/s<0.004$.

Victor Roy; A. K. Chaudhuri

2012-01-20T23:59:59.000Z

103

Termination of Safeguards for Accountable Nuclear Materials at the Idaho National Laboratory  

SciTech Connect (OSTI)

Termination of safeguards ends requirements of Nuclear Material Control and Accountability (MC&A) and thereby removes the safeguards basis for applying physical protection requirements for theft and diversion of nuclear material, providing termination requirements are met as described. Department of Energy (DOE) M 470.4 6 (Nuclear Material Control and Accountability [8/26/05]) stipulates: 1. Section A, Chapter I (1)( q) (1): Safeguards can be terminated on nuclear materials provided the following conditions are met: (a) 'If the material is special nuclear material (SNM) or protected as SNM, it must be attractiveness level E and have a measured value.' (b) 'The material has been determined by DOE line management to be of no programmatic value to DOE.' (c) 'The material is transferred to the control of a waste management organization where the material is accounted for and protected in accordance with waste management regulations. The material must not be collocated with other accountable nuclear materials.' Requirements for safeguards termination depend on the safeguards attractiveness levels of the material. For attractiveness level E, approval has been granted from the DOE Idaho Operations Office (DOE ID) to Battelle Energy Alliance, LLC (BEA) Safeguards and Security (S&S). In some cases, it may be necessary to dispose of nuclear materials of attractiveness level D or higher. Termination of safeguards for such materials must be approved by the Departmental Element (this is the DOE Headquarters Office of Nuclear Energy) after consultation with the Office of Security.

Michael Holzemer; Alan Carvo

2012-04-01T23:59:59.000Z

104

PCs and Computer Terminals in Commercial Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Special Topics and Data Reports > PC's and Computer Terminals Special Topics and Data Reports > PC's and Computer Terminals Picture of a personal computer Personal Computers and Computer Terminals in Commercial Buildings PCs and Computer Terminals in 1995 Changes Between 1992 and 1995 How the Number of PCs and Computer Terminals Were Estimated References and Additional Links Over the past 10 to 15 years, the use of personal computers (PCs) has risen dramatically. The energy consumed by PCs and other types of office equipment has become a significant component of electricity consumption in commercial buildings -- 13 percent (98 billion kWh) of all electricity consumed in 1995. That amount was nearly as much as the amount used to air condition these buildings. The Energy Information Administration's 1999 Annual Energy Outlook[1] forecasts that, for the next two decades, electricity consumption for office equipment (3.2 percent annually) will grow over twice as fast as electricity use as a whole (1.4 percent annually).

105

Feedthrough terminal for high-power cell  

DOE Patents [OSTI]

A feedthrough terminal for a high power electrochemical storage cell providing low resistance coupling to the conductive elements therein while isolating the terminal electrode from the highly corrosive environment within the cell is disclosed. A large diameter, cylindrical copper electrode is enclosed in a stainless steel tube with a BN powder feedthrough seal maintained around the stainless steel tube by means of facing insulative bushings and an outer sleeve. One end of the copper conductor is silver-brazed directly to a flat, butterfly bus bar within the cell, with the adjacent end of the surrounding outer feedthrough sleeve welded to the bus bar. A threaded seal is fixedly positioned on a distal portion of the stainless steel tube immediately adjacent the distal insulative bushing so as to compress the feedthrough seal in tight fitting relation around the stainless steel tube in providing a rugged, leak-proof electrical feedthrough terminal for the power cell.

Kaun, T.D.

1982-05-28T23:59:59.000Z

106

High-Quality, Low-Cost Bulk Gallium Nitride Substrates  

Broader source: Energy.gov [DOE]

To develop ESG into a viable bulk growth process for GaN that is more scalable to large-area wafer manufacturing and able to produce cost-effective, high-quality bulk GaN substrates.

107

Generalized Terminal Modeling of Electromagnetic Interference  

SciTech Connect (OSTI)

Terminal models have been used for various applications. In this paper, a three-terminal model is proposed for electromagnetic-interference (EMI) characterization. The model starts with a power electronic system at a particular operating condition and creates a unique linearized equivalent circuit. Impedances and current/voltage sources define the noise throughout the entire EMI frequency spectrum. All parameters needed to create the model are clearly defined to ensure convergence and maximize accuracy. In addition, the accuracy of the model is confirmed up to 100 MHz for a dc-dc boost converter using both simulation and experimental validation.

Baisden, Andrew Carson [IEEE Industrial Applications Society; Boroyevich, Dushan [Virginia Polytechnic Institute and State University (Virginia Tech); Wang, Fei [ORNL

2010-01-01T23:59:59.000Z

108

Nanostructured High-Temperature Bulk Thermoelectric Energy Conversion...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Nanostructured High-Temperature Bulk Thermoelectric Energy Conversion for Efficient Automotive Waste Heat Recovery Vehicle Technologies Office...

109

The Economic Case for Bulk Energy Storage in Transmission Systems  

E-Print Network [OSTI]

The Economic Case for Bulk Energy Storage in Transmission Systems with High Percentages to Engineer the Future Electric Energy System #12;#12;The Economic Case for Bulk Energy Storage Economic Case for Bulk Energy Storage in Transmission Sys- tems with High Percentages of Renewable

110

Bulk viscosity and r-modes of neutron stars  

E-Print Network [OSTI]

The bulk viscosity due to the non-leptonic process involving hyperons in $K^-$ condensed matter is discussed here. We find that the bulk viscosity is modified in a superconducting phase. Further, we demonstrate how the exotic bulk viscosity coefficient influences $r$-modes of neutron stars which might be sources of detectable gravitational waves.

Debarati Chatterjee; Debades Bandyopadhyay

2008-08-08T23:59:59.000Z

111

Bulk viscosity of gauge theory plasma at strong coupling  

E-Print Network [OSTI]

We propose a lower bound on bulk viscosity of strongly coupled gauge theory plasmas. Using explicit example of the N=2^* gauge theory plasma we show that the bulk viscosity remains finite at a critical point with a divergent specific heat. We present an estimate for the bulk viscosity of QGP plasma at RHIC.

Alex Buchel

2007-08-27T23:59:59.000Z

112

Rescheduling Bulk Gas Production and Distribution Wasu Glankwamdee  

E-Print Network [OSTI]

customer demand at minimum cost? #12;Bulk Gas Wrinkles Production Most sites operate in two modes: RegularRescheduling Bulk Gas Production and Distribution Wasu Glankwamdee Jackie Griffin Jeff Linderoth March 15, 2006 #12;Liquid Bulk Gas Production-Distribution Sites S Products P = {LOX, LNI} Customers C

Grossmann, Ignacio E.

113

Hanford ETR Bulk Vitrification System - Demonstration Bulk Vitrification System (DBVS) Review Report  

Broader source: Energy.gov (indexed) [DOE]

A Comprehensive Technical A Comprehensive Technical Review of the Demonstration Bulk Vitrification System Technical Assessment Conducted by an Independent and External Team of Experts Volume 1 September 28, 2006 Chartered by CH2M HILL Hanford Group, Inc. Richland, Washington 99352 RPP-31314 Executive Summary In May 2006, CH2M HILL Hanford Group, Inc. chartered an Expert Review Panel (ERP) to review the current status of the Demonstration Bulk Vitrification System (DBVS). It is the consensus of the ERP that bulk vitrification is a technology that requires further development and evaluation to determine its potential for meeting the Hanford waste stabilization mission. No fatal flaws (issues that would jeopardize the overall DBVS mission that cannot be mitigated) were found, given the current state of the project.

114

Bulk viscosity effects on elliptic flow  

E-Print Network [OSTI]

The effects of bulk viscosity on the elliptic flow $v_{2}$ are studied using realistic equation of state and realistic transport coefficients. We find that thebulk viscosity acts in a non trivial manner on $v_{2}$. At low $p_{T}$, the reduction of $v_{2}$ is even more effective compared to the case of shear viscosity, whereas at high $p_{T}$, an enhancement of $v_{2}$ compared to the ideal case is observed. We argue that this is caused by the competition of the critical behavior of the equation of state and the transport coefficients.

G. S. Denicol; T. Kodama; T. Koide; Ph. Mota

2009-07-24T23:59:59.000Z

115

A New Approach to Cosmological Bulk Viscosity  

E-Print Network [OSTI]

We examine the cosmological consequences of an alternative to the standard expression for bulk viscosity, one which was proposed to avoid the propagation of superluminal signals without the necessity of extending the space of variables of the theory. The Friedmann equation is derived for this case, along with an expression for the effective pressure. We find solutions for the evolution of the density of a viscous component, which differs markedly from the case of conventional Eckart theory; our model evolves toward late-time phantom-like behavior with a future singularity. Entropy production is addressed, and some similarities and differences to approaches based on the Mueller-Israel-Stewart theory are discussed.

Disconzi, Marcelo M; Scherrer, Robert J

2014-01-01T23:59:59.000Z

116

Magnetic structures of hcp bulk gadolinium  

Science Journals Connector (OSTI)

We present results of self-consistent linear-muffin-tin-orbital calculations with the atomic-sphere approximation for hcp bulk Gd, using the local spin-density approximation (LSDA) and gradient correction (GC) for the description of exchange and correlation. In the LSDA calculation antiferromagnetic order is favored over the ferromagnetic, and experimentally observed, structure. The GC weakens the bonding, leading to a higher equilibrium lattice parameter. At the new equilibrium volume the ground state is ferromagnetic. Our results point towards a magnetic phase transition under pressure.

Martina Heinemann and Walter M. Temmerman

1994-02-01T23:59:59.000Z

117

Cost reduction ideas for LNG terminals  

SciTech Connect (OSTI)

LNG projects are highly capital intensive and this has long been regarded as being inevitable. However, recent developments are forcing the LNG industry to aggressively seek cost reductions. For example, the gas-to-liquids (GTL) process is increasingly seen as a potential rival technology and is often being touted as an economically superior alternative fuel source. Another strong driving force behind needed cost reductions is the low crude oil price which seems to have settled in the $10--13/bb. range. LNG is well positioned as the fuel of choice for environmentally friendly new power projects. As a result of the projected demand for power especially in the Pacific Rim countries several LNG terminal projects are under consideration. Such projects will require a new generation of LNG terminal designs emphasizing low cost, small scale and safe and fully integrated designs from LNG supply to power generation. The integration of the LNG terminal with the combined cycle gas turbine (CCGT) power plant offers substantial cost savings opportunities for both plants. Various cost reduction strategies and their impact on the terminal design are discussed including cost reduction due to integration.

Habibullah, A.; Weldin, F.

1999-07-01T23:59:59.000Z

118

eRA Training Team1 Terminations  

E-Print Network [OSTI]

eRA Training Team1 xTrain Terminations Electronic Research Administration Sponsored by: The National Institutes of Health, Office of Extramural Research March 2012 #12;eRA Training Team2 xTrain General Information xTrain Overview The following section provides general information on the xTrain

Baker, Chris I.

119

eRA Training Team1 Terminations  

E-Print Network [OSTI]

eRA Training Team1 xTrain Terminations Electronic Research Administration Sponsored by: The National Institutions of Health, Office of Extramural Research April 2010 #12;eRA Training Team2 xTrain General Information xTrain Overview The following section provides general information on the xTrain

Baker, Chris I.

120

Optimization Control Strategies for HVAC Terminal Boxes  

E-Print Network [OSTI]

The HVAC terminal boxes are one of the major building HVAC components. They directly impact the building room comfort conditions and the energy costs. How to operate the box in a highly energy efficient way and maintain the room comfort level...

Zhu, Y.; Batten, T.; Noboa, H.; Claridge, D. E.; Turner, W. D.; Liu, M.; Zhou, J.; Cameron, C.; Keeble, D.; Hirchak, R.

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Transferring Data at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Transferring Data Advice and Overview NERSC provides many facilities for storing data and performing analysis. However, transfering data - whether over the wide area network...

122

The Bulk Channel in Thermal Gauge Theories  

E-Print Network [OSTI]

We investigate the thermal correlator of the trace of the energy-momentum tensor in the SU(3) Yang-Mills theory. Our goal is to constrain the spectral function in that channel, whose low-frequency part determines the bulk viscosity. We focus on the thermal modification of the spectral function, $\\rho(\\omega,T)-\\rho(\\omega,0)$. Using the operator-product expansion we give the high-frequency behavior of this difference in terms of thermodynamic potentials. We take into account the presence of an exact delta function located at the origin, which had been missed in previous analyses. We then combine the bulk sum rule and a Monte-Carlo evaluation of the Euclidean correlator to determine the intervals of frequency where the spectral density is enhanced or depleted by thermal effects. We find evidence that the thermal spectral density is non-zero for frequencies below the scalar glueball mass $m$ and is significantly depleted for $m\\lesssim\\omega\\lesssim 3m$.

Harvey B. Meyer

2010-02-17T23:59:59.000Z

123

What about Bulk Objects? "All things glow"  

E-Print Network [OSTI]

energy emission T = temperature of the object As T , max As T , TOTAL[E] P = E/t =AT4 = object, trapping energy from the sun" (www.ucar.edu) #12;Note: 1) Atmospheric convection should increase in global to the "Encounter with Energy"...! ! How Is Energy Encountered... or Transferred? 1. Electromagnetic Waves (just

124

Accelerating the transfer in Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Accelerating the transfer in Technology Transfer Accelerating the transfer in Technology Transfer Community Connections: Our link to Northern New Mexico Communities Latest Issue:Dec. 2013 - Jan. 2014 All Issues » submit Accelerating the transfer in Technology Transfer Express Licensing fast tracks commercialization. May 1, 2013 Division Leader Dave Pesiri Division Leader Dave Pesiri. Contact Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email Express Licensing program To better serve its partners, one of the first improvements the Lab's Technology Transfer Division (TT) has made is through its new Express Licensing initiative. Standardized license agreements and fee structures will remove long and complicated negotiations and decrease the time required to get patented Lab technology and software into the hands of

125

Photocurrent in bulk heterojunction solar cells with similar electron and hole mean free path  

SciTech Connect (OSTI)

We present photocurrents at several temperatures carried out in a bulk heterojunction photovoltaic device. To explain the results, we developed an analytical model assuming non-injecting contacts and equal mean free paths for electrons and holes. The fitting of the equation to the experimental data provided the temperature evolution of the charge transfer state dissociation probability (P) and ??, where ? is the charge carrier mobility and ? is the charge carrier lifetime. The photocurrent expression tends towards a saturation value of eGPL for high electric fields, where GP is the generation rate of charge carriers.

Coutinho, Douglas José; Faria, Roberto Mendonça, E-mail: faria@ifsc.usp.br [Instituto de Física de São Carlos, Universidade de São Paulo, C.P. 369, 13560-970 São Carlos, SP (Brazil)

2013-11-25T23:59:59.000Z

126

Federal Laboratory Technology Transfer  

E-Print Network [OSTI]

Federal Laboratory Technology Transfer Fiscal Year 2008 Prepared by: National Institute to submit this fiscal year 2008 Technology Transfer Summary Report to the President and the Congress transfer authorities established by the Technology Transfer Commercialization Act of 2000 (P.L. 106

Perkins, Richard A.

127

On bulk viscosity and moduli decay  

E-Print Network [OSTI]

This pedagogically intended lecture, one of four under the header "Basics of thermal QCD", reviews an interesting relationship, originally pointed out by Bodeker, that exists between the bulk viscosity of Yang-Mills theory (of possible relevance to the hydrodynamics of heavy ion collision experiments) and the decay rate of scalar fields coupled very weakly to a heat bath (appearing in some particle physics inspired cosmological scenarios). This topic serves, furthermore, as a platform on which a number of generic thermal field theory concepts are illustrated. The other three lectures (on the QCD equation of state and the rates of elastic as well as inelastic processes experienced by heavy quarks) are recapitulated in brief encyclopedic form.

M. Laine

2010-07-15T23:59:59.000Z

128

Electron transport in the bulk photovoltaic effect  

Science Journals Connector (OSTI)

The spontaneous motion of electrons in the bulk photovoltaic effect in pyroelectric materials may be explained by separating the processes into two steps: the generation of photoelectrons whose distribution is asymmetric in momentum and a subsequent normal diffusion of the carriers. Asymmetric generation violates time-reversal symmetry and is shown to be only possible for local states in polar systems. Transport properties are calculated for the short-circuit and the open-end case. It is shown that in high-resistivity materials the short-circuit current is not affected by impurities other than those supplying the asymmetric photoelectrons. The open-end saturation field is proportional to the short-circuit current Es=Jsc?, where ? is the photoconductivity. Both results agree with experiment.

H. Heyszenau

1978-08-15T23:59:59.000Z

129

Organic hybrid planar-nanocrystalline bulk heterojunctions  

DOE Patents [OSTI]

A photosensitive optoelectronic device having an improved hybrid planar bulk heterojunction includes a plurality of photoconductive materials disposed between the anode and the cathode. The photoconductive materials include a first continuous layer of donor material and a second continuous layer of acceptor material. A first network of donor material or materials extends from the first continuous layer toward the second continuous layer, providing continuous pathways for conduction of holes to the first continuous layer. A second network of acceptor material or materials extends from the second continuous layer toward the first continuous layer, providing continuous pathways for conduction of electrons to the second continuous layer. The first network and the second network are interlaced with each other. At least one other photoconductive material is interspersed between the interlaced networks. This other photoconductive material or materials has an absorption spectra different from the donor and acceptor materials.

Forrest, Stephen R. (Ann Arbor, MI); Yang, Fan (Piscataway, NJ)

2011-03-01T23:59:59.000Z

130

Organic hybrid planar-nanocrystalline bulk heterojunctions  

DOE Patents [OSTI]

A photosensitive optoelectronic device having an improved hybrid planar bulk heterojunction includes a plurality of photoconductive materials disposed between the anode and the cathode. The photoconductive materials include a first continuous layer of donor material and a second continuous layer of acceptor material. A first network of donor material or materials extends from the first continuous layer toward the second continuous layer, providing continuous pathways for conduction of holes to the first continuous layer. A second network of acceptor material or materials extends from the second continuous layer toward the first continuous layer, providing continuous pathways for conduction of electrons to the second continuous layer. The first network and the second network are interlaced with each other. At least one other photoconductive material is interspersed between the interlaced networks. This other photoconductive material or materials has an absorption spectra different from the donor and acceptor materials.

Forrest, Stephen R.; Yang, Fan

2013-04-09T23:59:59.000Z

131

DEPLOYMENT OF THE BULK TRITIUM SHIPPING PACKAGE  

SciTech Connect (OSTI)

A new Bulk Tritium Shipping Package (BTSP) was designed by the Savannah River National Laboratory to be a replacement for a package that has been used to ship tritium in a variety of content configurations and forms since the early 1970s. The BTSP was certified by the National Nuclear Safety Administration in 2011 for shipments of up to 150 grams of Tritium. Thirty packages were procured and are being delivered to various DOE sites for operational use. This paper summarizes the design features of the BTSP, as well as associated engineered material improvements. Fabrication challenges encountered during production are discussed as well as fielding requirements. Current approved tritium content forms (gas and tritium hydrides), are reviewed, as well as, a new content, tritium contaminated water on molecular sieves. Issues associated with gas generation will also be discussed.

Blanton, P.

2013-10-10T23:59:59.000Z

132

Declaration of Termination of Domestic Partnership Form  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DPT (01-2012) DPT (01-2012) SANDIA PROPRIETARY INFORMATION PERSONALLY IDENTIFIABLE INFORMATION (PII) (WHEN COMPLETE) Declaration of Termination of Domestic Partnership Form To be completed by the employee and submitted to the Sandia Benefits Customer Service Center at the address above. Please keep a copy for your records. Sworn Affidavit We, __________________________________________ and _____________________________________________ Employee Domestic Partner __________________________________________ _____________________________________________ Employee Social Security Number Domestic Partner Social Security Number __________________________________________ _____________________________________________ Employee Date of Birth Domestic Partner Date of Birth

133

Simulation of proton radiography terminal at IMP  

E-Print Network [OSTI]

Proton radiography is used for advanced hydrotesting as a new type radiography technology due to its powerful penetration capability and high detection efficiency. A new proton radiography terminal will be developed to radiograph static samples at Institute of Modern Physics of Chinese Academy of Science (IMP-CAS). The proton beam with the maximum energy of 2.6 GeV will be produced by Heavy Ion Research Facility in Lanzhou-Cooling Storage Ring (HIRFL-CSR). The proton radiography terminal consists of the matching magnetic lens and the Zumbro lens system. In this paper, the design scheme and all optic parameters of this beam terminal for 2.6GeV proton energy are presented by simulating the beam optics using WINAGILE code. My-BOC code is used to test the particle tracking of proton radiography beam line. Geant4 code and G4beamline code are used for simulating the proton radiography system. The results show that the transmission efficiency of proton without target is 100%, and the effect of secondary particles ca...

Yan, Yan; Huang, Zhi-Wu; Wang, Jie; Yao, Ze-En; Wang, Jun-Run; Wei, Zheng; Yang, Jian-Cheng; Yuan, You-Jin

2015-01-01T23:59:59.000Z

134

Bacterial Hand Contamination and Transfer after Use of Contaminated Bulk-Soap-Refillable Dispensers  

Science Journals Connector (OSTI)

...3 Department of Soil, Water, and Environmental...each hand after washing, and 2.23 log10...Controlled hand washing studies. (i...soap contained a surfactant system representative...purpose of hand washing is to remove soil and to reduce the...

Carrie A. Zapka; Esther J. Campbell; Sheri L. Maxwell; Charles P. Gerba; Michael J. Dolan; James W. Arbogast; David R. Macinga

2011-03-18T23:59:59.000Z

135

RAPID/BulkTransmission/General Construction | Open Energy Information  

Open Energy Info (EERE)

RAPIDBulkTransmissionGeneral Construction < RAPID | BulkTransmission Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA RAPID Toolkit...

136

On Eling-Oz formula for the holographic bulk viscosity  

E-Print Network [OSTI]

Recently Eling and Oz [1] proposed a simple formula for the bulk viscosity of holographic plasma. They argued that the formula is valid in the high temperature (near-conformal) regime, but is expected to break down at low temperatures. We point out that the formula is in perfect agreement with the previous computations of the bulk viscosity of the cascading plasma [2,3], as well as with the previous computations of the bulk viscosity of N=2^* plasma [4,5]. In the latter case it correctly reproduces the critical behaviour of the bulk viscosity in the vicinity of the critical point with the vanishing speed of sound.

Alex Buchel

2011-03-19T23:59:59.000Z

137

Bulk viscosity of QCD matter near the critical temperature  

E-Print Network [OSTI]

Kubo's formula relates bulk viscosity to the retarded Green's function of the trace of the energy-momentum tensor. Using low energy theorems of QCD for the latter we derive the formula which relates the bulk viscosity to the energy density and pressure of hot matter. We then employ the available lattice QCD data to extract the bulk viscosity as a function of temperature. We find that close to the deconfinement temperature bulk viscosity becomes large, with viscosity-to-entropy ratio zeta/s about 1.

D. Kharzeev; K. Tuchin

2007-05-29T23:59:59.000Z

138

Innovative approaches to improve bulk heterojuction organic photovoltaic device performance.  

E-Print Network [OSTI]

??In this thesis we studied the electrical properties of bulk heterojunction organic photovoltaic (OPV) devices fabricated using a variety of conjugated polymers, including regioregular P3HT,… (more)

Zhang, Ye

2010-01-01T23:59:59.000Z

139

Regulatory Roadmap Workshop for Federal Bulk Transmission Regulations...  

Open Energy Info (EERE)

Regulatory Roadmapping Pgower's picture Submitted by Pgower(45) Member 7 August, 2014 - 13:19 One-day workshop to review regulatory roadmaps for bulk transmission. Date:...

140

RAPID/BulkTransmission/Arizona | Open Energy Information  

Open Energy Info (EERE)

Entity responsible for coordinating and promoting Bulk Electric System reliability in the Western Interconnection, including Arizona. WECC also provides an environment for...

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Light-Emitting Diodes on Semipolar Bulk Gallium Nitride Substrate  

Broader source: Energy.gov [DOE]

This project is producing high-efficiency semipolar light-emitting diodes (LEDs) on low-defect bulk gallium nitride (GaN) substrates.

142

RAPID/BulkTransmission/New Mexico | Open Energy Information  

Open Energy Info (EERE)

Information Desktop Toolkit BETA RAPID Toolkit About Bulk Transmission Geothermal Solar Resources Contribute Contact Us Regulatory Information Overviews Search for other...

143

Bulk Fuel Procurement Process & Alternative Drop-in Fuel  

Broader source: Energy.gov [DOE]

Jeanne Binder, DLA Energy, presentation on Bulk Fuel Procurement Process & Alternative Drop-in Fuel at the Advanced Biofuels Industry Roundtable.

144

Strategies for High Thermoelectric zT in Bulk Materials  

Broader source: Energy.gov [DOE]

Zintl principle in chemistry, complex electronic band structures, and incorporation of nanometer sized particles were used to explore, optimize and improve bulk thermoelectric materials

145

Recent Device Developments with Advanced Bulk Thermoelectric Materials at RTI  

Broader source: Energy.gov [DOE]

Reviews work in engineered thin-film nanoscale thermoelectric materials and nano-bulk materials with high ZT undertaken by RTI in collaboration with its research partners

146

High Heat Flux Thermoelectric Module Using Standard Bulk Material  

Broader source: Energy.gov [DOE]

Presents high heat flux thermoelectric module design for cooling using a novel V-shaped shunt configuration with bulk TE elements achieving high area packing fractions

147

Control Center and Data Management Improvements Modernize Bulk...  

Broader source: Energy.gov (indexed) [DOE]

Operations Corporation's (GSOC) Smart Grid Investment Grant (SGIG) project modernized bulk power management and control center operations for 38 electric membership...

148

RAPID/BulkTransmission/Air Quality | Open Energy Information  

Open Energy Info (EERE)

RAPIDBulkTransmissionAir Quality < RAPID | BulkTransmission Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA RAPID Toolkit About...

149

Nanostructured High-Temperature Bulk Thermoelectric Energy Conversion...  

Broader source: Energy.gov (indexed) [DOE]

High Temperature Bulk Thermoelectric Energy Conversion for Efficient Waste Heat Recovery Project Overview 2 * Start: October 2011 * End: September 2015 * Percent complete -...

150

RAPID/BulkTransmission/About | Open Energy Information  

Open Energy Info (EERE)

Contribute Contact Us About Bulk Transmission Lattice.jpg High-voltage transmission lines form the backbone of electricity systems. Transmission lines are designed to carry...

151

RAPID/BulkTransmission/Water Quality | Open Energy Information  

Open Energy Info (EERE)

RAPIDBulkTransmissionWater Quality < RAPID | BulkTransmission Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA RAPID Toolkit About...

152

Improving Bulk Microphysics Parameterizations in Simulations of Aerosol Effects  

SciTech Connect (OSTI)

To improve the microphysical parameterizations for simulations of the aerosol indirect effect (AIE) in regional and global climate models, a double-moment bulk microphysical scheme presently implemented in the Weather Research and Forecasting (WRF) model is modified and the results are compared against atmospheric observations and simulations produced by a spectral bin microphysical scheme (SBM). Rather than using prescribed aerosols as in the original bulk scheme (Bulk-OR), a prognostic doublemoment aerosol representation is introduced to predict both the aerosol number concentration and mass mixing ratio (Bulk-2M). The impacts of the parameterizations of diffusional growth and autoconversion and the selection of the embryonic raindrop radius on the performance of the bulk microphysical scheme are also evaluated. Sensitivity modeling experiments are performed for two distinct cloud regimes, maritime warm stratocumulus clouds (SC) over southeast Pacific Ocean from the VOCALS project and continental deep convective clouds (DCC) in the southeast of China from the Department of Energy/ARM Mobile Facility (DOE/AMF) - China field campaign. The results from Bulk-2M exhibit a much better agreement in the cloud number concentration and effective droplet radius in both the SC and DCC cases with those from SBM and field measurements than those from Bulk-OR. In the SC case particularly, Bulk-2M reproduces the observed drizzle precipitation, which is largely inhibited in Bulk-OR. Bulk-2M predicts enhanced precipitation and invigorated convection with increased aerosol loading in the DCC case, consistent with the SBM simulation, while Bulk-OR predicts the opposite behaviors. Sensitivity experiments using four different types of autoconversion schemes reveal that the autoconversion parameterization is crucial in determining the raindrop number, mass concentration, and drizzle formation for warm 2 stratocumulus clouds. An embryonic raindrop size of 40 ?m is determined as a more realistic setting in the autoconversion parameterization. The saturation adjustment employed in calculating condensation/evaporation in the bulk scheme is identified as the main factor responsible for the large discrepancies in predicting cloud water in the SC case, suggesting that an explicit calculation of diffusion growth with predicted supersaturation is necessary for further improvements of the bulk microphysics scheme. Lastly, a larger rain evaporation rate below cloud is found in the bulk scheme in comparison to the SBM simulation, which could contribute to a lower surface precipitation in the bulk scheme.

Wang, Yuan; Fan, Jiwen; Zhang, Renyi; Leung, Lai-Yung R.; Franklin, Charmaine N.

2013-06-05T23:59:59.000Z

153

Material Profile Influences in Bulk-Heterojunctions  

SciTech Connect (OSTI)

he morphology in mixed bulk-heterojunction films are compared using three different quantitative measurement techniques. We compare the vertical composition changes using high-angle annular dark-field scanning transmission electron microscopy with electron tomography and neutron and x-ray reflectometry. The three measurement techniques yield qualita-tively comparable vertical concentration measurements. The presence of a metal cathode during thermal annealing is observed to alter the fullerene concentration throughout the thickness of the film for all measurements. However, the abso-lute vertical concentration of fullerene is quantitatively different for the three measurements. The origin of the quantitative measurement differences is discussed. The authors thank Luna Innovations, Inc. for donating the endohedral fullerenes used in this study and Plextronics for the P3HT. They are gratefully thank the National Science Foundation Energy for Sustainability Program, Award No. 0933435. This work benefited from the use of the Lujan Neutron Scattering Center at Los Alamos Neutron Science Center funded by the DOE Office of Basic Energy Sciences and Los Alamos National Laboratory under DOE Contract DE-AC52-06NA25396. This research was also supported in part by Laboratory Directed Research & Development program at PNNL. The Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy under contract DE-AC05-76RL01830.

Roehling, John D.; Rochester, Christopher W.; Ro, Hyun W.; Wang, Peng; Majewski, Jaroslaw; Batenburg, Kees J.; Arslan, Ilke; Delongchamp, Dean M.; Moule, Adam J.

2014-10-01T23:59:59.000Z

154

Advance Resource Provisioning in Bulk Data Scheduling  

SciTech Connect (OSTI)

Today?s scientific and business applications generate mas- sive data sets that need to be transferred to remote sites for sharing, processing, and long term storage. Because of increasing data volumes and enhancement in current net- work technology that provide on-demand high-speed data access between collaborating institutions, data handling and scheduling problems have reached a new scale. In this paper, we present a new data scheduling model with ad- vance resource provisioning, in which data movement operations are defined with earliest start and latest comple- tion times. We analyze time-dependent resource assign- ment problem, and propose a new methodology to improve the current systems by allowing researchers and higher-level meta-schedulers to use data-placement as-a-service, so they can plan ahead and submit transfer requests in advance. In general, scheduling with time and resource conflicts is NP-hard. We introduce an efficient algorithm to organize multiple requests on the fly, while satisfying users? time and resource constraints. We successfully tested our algorithm in a simple benchmark simulator that we have developed, and demonstrated its performance with initial test results.

Balman, Mehmet

2012-10-01T23:59:59.000Z

155

Termination of Safeguards on ULWBR Material  

SciTech Connect (OSTI)

The Department of Energy (DOE), Office of Environmental Management, has approved the disposition of 31 metric tons of Unirradiated Light Water Breeder Reactor (ULWBR) material in canisters stored within dry wells of the Underground Fuel Storage Facility at the Idaho Nuclear Technology and Engineering Center (INTEC). This unirradiated material consists primarily of ceramic pellets of thorium oxide in stainless steel cladding, but it also contains 300 kilograms of uranium that is 98 wt% U-233. The ULWBR material was not processed at the INTEC because it was incompatible with prior chemical separation schemes. Other economical recovery options have not been identified, and expressions of interest for consolidating the material with existing projects at other DOE sites have not been received. The U-233 could be used for producing the medical isotope Actinium-225, but the proof-of-principle demonstration and follow-on pilot program have not been developed to the point of requiring production quantities of U-233. Consequently, the selected disposition of the ULWBR material was burial as Low Level Waste at the Nevada Test Site (NTS), which required terminating safeguards controls for the contained Category II quantity of Attractiveness Level D special nuclear material (SNM). The requested termination followed the twelve point evaluation criteria of the Historical Defense Program Discard Guidance and included a security analysis for evaluating the risks of theft, diversion, and radiological sabotage associated with the material. Continuity of knowledge in the book inventory was assured by documenting that the original shipper’s measurements accurately reflected the quantities of materials received and that the ULWBR materials had remained under adequate physical protection and had been subject to periodic physical inventories. The method selected for substantiating the book values as the basis for terminating safeguards was the nondestructive assay used during physical inventories. Shipping arrangements included refurbishing a licensed cask to be reused over the duration of the termination process. An accompanying batching plan and shipping schedule were developed to accommodate multiple commercial shipments of Category III quantities of SNM in the selected cask, such that all canisters would be received at NTS prior to the expiration of the nonrenewable cask license.

Ivan R. Thomas; Ernest L. Laible

2008-07-01T23:59:59.000Z

156

NERSC's Data Transfer Nodes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Transfer Nodes Data Transfer Nodes Data Transfer Nodes Overview The data transfer nodes are NERSC servers dedicated to performing transfers between NERSC data storage resources such as HPSS and the NERSC Global Filesystem (NGF), and storage resources at other sites including the Leadership Computing Facility at ORNL (Oak Ridge National Laboratory). These nodes are being managed (and monitored for performance) as part of a collaborative effort between ESnet, NERSC, and ORNL to enable high performance data movement over the high-bandwidth 10Gb ESnet wide-area network (WAN). Restrictions In order to keep the data transfer nodes performing optimally for data transfers, we request that users restrict interactive use of these systems to tasks that are related to preparing data for transfer or are directly

157

Inverse Energy Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

which is unstable. It saturates by transfer to a separate, damped eigenmode (i.e., a subcritical spectrum of damped waves). Inverse energy transfer is carried by three-wave...

158

HEAT TRANSFER FLUIDS  

E-Print Network [OSTI]

The choice of heat transfer fluids has significant effects on the performance, cost, and reliability of solar thermal systems. In this chapter, we evaluate existing heat transfer fluids such as oils and molten salts based ...

Lenert, Andrej

2012-01-01T23:59:59.000Z

159

Phase-Transfer Catalysts  

Science Journals Connector (OSTI)

In previous chapters we learned that a phase-transfer catalyst must have two particular chemical functions to be successful, that is, it must rapidly transfer one of the reactant species into the normal phase ...

Charles M. Starks; Charles L. Liotta; Marc E. Halpern

1994-01-01T23:59:59.000Z

160

Leptonic contribution to the bulk viscosity of nuclear matter  

SciTech Connect (OSTI)

For {beta}-equilibrated nuclear matter we estimate the contribution to the bulk viscosity from purely leptonic processes, namely the conversion of electrons to and from muons. For oscillation frequencies in the kilohertz range, we find that this process provides the dominant contribution to the bulk viscosity when the temperature is well below the critical temperature for superconductivity or superfluidity of the nuclear matter.

Alford, Mark G.; Good, Gerald [Physics Department, Washington University, St. Louis, Missouri 63130 (United States)

2010-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

BULK TITANIUM MICROFLUIDIC NETWORKS FOR PROTEIN SELF-ASSEMBLY STUDIES  

E-Print Network [OSTI]

BULK TITANIUM MICROFLUIDIC NETWORKS FOR PROTEIN SELF-ASSEMBLY STUDIES E.R. Parker1 , L.S. Hirst2 developed micromachining technique to fabricate microfluidic networks in thin titanium foils. These devices relevant conditions. Keywords: bulk titanium, cytoskeleton proteins, microfluidics, surface modification 1

MacDonald, Noel C.

162

MORPHOLOGY DEPENDENT SHORT CIRCUIT CURRENT IN BULK HETEROJUNCTION SOLAR CELL  

E-Print Network [OSTI]

a relatively inexpensive option for the future solar cell technology, provided its efficiency increases beyondMORPHOLOGY DEPENDENT SHORT CIRCUIT CURRENT IN BULK HETEROJUNCTION SOLAR CELL Biswajit Ray, Pradeep, West Lafayette, Indiana, USA ABSTRACT Polymer based bulk heterostructure (BH) solar cell offers

Alam, Muhammad A.

163

INL Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Transfer Through collaboration with industry partners, INL's Technology Deployment office makes available to American agencies and international organizations unique...

164

Integrated risk assessment for LNG terminals  

Science Journals Connector (OSTI)

Abstract This paper presents an integrated risk assessment framework for Liquefied Natural Gas (LNG) terminals. The basic steps for risk assessment are the following: a) hazard identification, b) accident sequence modeling, where logic models such as Event Trees and Fault Trees are developed c) data acquisition and parameter estimation, used to estimate frequencies of the initiating events, component unavailability and probabilities of human actions, d) accident sequence quantification, where all accident sequences are assessed, e) consequence assessment, where release, evaporation rate, radiation levels and overpressure owing to immediate or delayed ignition of LNG is performed and f) integration of results where risk indices are assessed. Risk assessment of an onshore and an offshore LNG terminal is performed, according to the basic methodological steps, and the distances where individual risk levels equal to 10?5–10?7/yr are assessed and presented in the form of individual contours. A section dedicated to I.A. Papazoglou, pioneer in Quantitative Risk Assessment both in the nuclear and chemical industry is also provided.

O.N. Aneziris; I.A. Papazoglou; M. Konstantinidou; Z. Nivolianitou

2014-01-01T23:59:59.000Z

165

Carbon nanotubes grown on bulk materials and methods for fabrication  

DOE Patents [OSTI]

Disclosed are structures formed as bulk support media having carbon nanotubes formed therewith. The bulk support media may comprise fibers or particles and the fibers or particles may be formed from such materials as quartz, carbon, or activated carbon. Metal catalyst species are formed adjacent the surfaces of the bulk support material, and carbon nanotubes are grown adjacent the surfaces of the metal catalyst species. Methods employ metal salt solutions that may comprise iron salts such as iron chloride, aluminum salts such as aluminum chloride, or nickel salts such as nickel chloride. Carbon nanotubes may be separated from the carbon-based bulk support media and the metal catalyst species by using concentrated acids to oxidize the carbon-based bulk support media and the metal catalyst species.

Menchhofer, Paul A. (Clinton, TN); Montgomery, Frederick C. (Oak Ridge, TN); Baker, Frederick S. (Oak Ridge, TN)

2011-11-08T23:59:59.000Z

166

ENHANCING THE TRANSFER STUDENT  

E-Print Network [OSTI]

Efforts #12;Who Are Ohio State Transfer Students? #12;TRANSFER PROFILE DatafromSU12,AU12,SP13 3 as NFYS: 576 Average Transfer Hours of Enrolled Student: 52.2 Living on Campus: 470 Total # Sending Expectations (time management skills, balancing a more rigorous course load, study skills) 13.24% Majors (how

167

Federal Laboratory Technology Transfer  

E-Print Network [OSTI]

Federal Laboratory Technology Transfer Fiscal Year 2007 Prepared by: National Institute to present to the President and the Congress this Federal Laboratory Technology Transfer Report summarizing the achievements of Federal technology transfer and partnering programs of the Federal research and development

Perkins, Richard A.

168

Federal Laboratory Technology Transfer  

E-Print Network [OSTI]

Federal Laboratory Technology Transfer Fiscal Year 2009 Prepared by: National Institute to submit this fiscal year 2009 Technology Transfer Summary Report to the President and the Congress in accordance with 15 USC Sec 3710(g)(2) for an annual summary on the implementation of technology transfer

Perkins, Richard A.

169

Heat Transfer Guest Editorial  

E-Print Network [OSTI]

Journal of Heat Transfer Guest Editorial We are indeed delighted in bringing out this special issue was showcased in diverse areas such as traditional heat and mass transfer, lab-on-chip, sensors, biomedical applica- tions, micromixers, fuel cells, and microdevices. Selected papers in the field of heat transfer

Kandlikar, Satish

170

Silicon bulk micromachined hybrid dimensional artifact.  

SciTech Connect (OSTI)

A mesoscale dimensional artifact based on silicon bulk micromachining fabrication has been developed and manufactured with the intention of evaluating the artifact both on a high precision coordinate measuring machine (CMM) and video-probe based measuring systems. This hybrid artifact has features that can be located by both a touch probe and a video probe system with a k=2 uncertainty of 0.4 {micro}m, more than twice as good as a glass reference artifact. We also present evidence that this uncertainty could be lowered to as little as 50 nm (k=2). While video-probe based systems are commonly used to inspect mesoscale mechanical components, a video-probe system's certified accuracy is generally much worse than its repeatability. To solve this problem, an artifact has been developed which can be calibrated using a commercially available high-accuracy tactile system and then be used to calibrate typical production vision-based measurement systems. This allows for error mapping to a higher degree of accuracy than is possible with a glass reference artifact. Details of the designed features and manufacturing process of the hybrid dimensional artifact are given and a comparison of the designed features to the measured features of the manufactured artifact is presented and discussed. Measurement results from vision and touch probe systems are compared and evaluated to determine the capability of the manufactured artifact to serve as a calibration tool for video-probe systems. An uncertainty analysis for calibration of the artifact using a CMM is presented.

Claudet, Andre A.; Tran, Hy D.; Bauer, Todd Marks; Shilling, Katherine Meghan; Oliver, Andrew David

2010-03-01T23:59:59.000Z

171

Microsoft Word - CX-RossTransformerOilTerminalUpgradeFY12_WEB.docx  

Broader source: Energy.gov (indexed) [DOE]

4, 2012 4, 2012 REPLY TO ATTN OF: KEP-4 SUBJECT: Environmental Clearance Memorandum Brett Sherer Project Manager - KEP-4 Proposed Action: Ross Transformer Oil Terminal Upgrade Work Order #: 00298659 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.6, Additions or modifications to electric power transmission facilities Location: Ross Complex, Township 2 North, Range 1 East, Section 14 of Clark County, Washington Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to install four new horizontal, double walled, 20,000 gallon insulating oil storage tanks at BPA's Ross Complex. In addition, BPA would install a railcar oil pumping and transfer system as well as a truck oil transfer pad. Both the

172

Heat transfer system  

DOE Patents [OSTI]

A heat transfer system for a nuclear reactor. Heat transfer is accomplished within a sealed vapor chamber which is substantially evacuated prior to use. A heat transfer medium, which is liquid at the design operating temperatures, transfers heat from tubes interposed in the reactor primary loop to spaced tubes connected to a steam line for power generation purposes. Heat transfer is accomplished by a two-phase liquid-vapor-liquid process as used in heat pipes. Condensible gases are removed from the vapor chamber through a vertical extension in open communication with the chamber interior.

McGuire, Joseph C. (Richland, WA)

1982-01-01T23:59:59.000Z

173

Effect of monomer/nanoclay interaction on the kinetics of atom transfer radical homo- and copolymerization of styrene and methyl acrylate  

Science Journals Connector (OSTI)

Atom transfer radical homo- and copolymerization of styrene and methyl acrylate initiated with CCl3...-terminated poly(vinyl acetate) macroinitiator were performed at 90°C in the presence of nanoclay (Cloisite 30...

Mahdi Abdollahi; Mohammad Ali Semsarzadeh

2012-04-01T23:59:59.000Z

174

Numerical Analysis of Heat Transfer and Fluid Characteristics of Flowing Liquid Nitrogen in HTS Cable  

Science Journals Connector (OSTI)

Abstract High-temperature superconducting (HTS) cable has heat intrusion from the termination including joule heat generation at the terminal joint and from the room temperature cable through the Cu current lead. According to the length of the HTS cable, this heat loss may become a considerable amount which cannot be ignored in the HTS cable system. In this study, referring to a high-voltage cable (HV cable) which was developed in M-PACC project, the effect of heat transfer at the interface between the terminal joint and LN2 in the terminal vessel (ho) on the temperature of the HTS cable were calculated and evaluated. The condition of flow in the terminal vessel was assumed to be natural convection, forced flow or static condition for evaluating this effect with various heat transfer condition. As a result, in the case of the natural convection, most of heats flow into the LN2 in the terminal vessel where the volumetric flow of the LN2 is large since ho becomes high. Accordingly, the temperature rise of the LN2 in the inner pipe of Cu former and the terminal vessel can be restricted. However, in the cases of the forced flow and the static condition, most of heats flow into the LN2 in the inner pipe where the volumetric flow of the LN2 is small since ho becomes small. Accordingly, the temperature rise of the LN2 in the inner pipe becomes high. This temperature rise of the LN2 in the inner pipe makes the temperature of the HTS conductor large resulting in remarkable increase of AC losses. Consequently, on the HV cable design, for restriction of the AC loss increase, it is expected that designing the HTS cable termination such as extending outer surface of the terminal joint for increasing of the heat inflow from the terminal joint to the LN2 in the vessel is effective.

O. Maruyama; T. Ohkuma; T. Izumi; Y. Shiohara

2014-01-01T23:59:59.000Z

175

Time-resolved energy transfer from single chloride-terminated nanocrystals to graphene  

E-Print Network [OSTI]

and Engineering, Solid-State Science and Engineering, Columbia University, New York, New York 10027, USA 2 Department of Mechanical Engineering, Columbia University, New York, New York 10027, USA 3 Department of Chemistry, Columbia University, New York, New York 10027, USA 4 Brookhaven National Laboratory, Upton, New

Hone, James

176

Universal null DTE (data terminal equipment)  

DOE Patents [OSTI]

A communication device in the form of data terminal equipment permits two data communication equipments, each having its own master clock and operating at substantially the same nominal clock rate, to communicate with each other in a multi-segment circuit configuration of a general communication network even when phase or frequency errors exist between the two clocks. Data transmitted between communication equipments of two segments of the communication network is buffered. A variable buffer fill circuit is provided to fill the buffer to a selectable extent prior to initiation of data output clocking. Selection switches are provided to select the degree of buffer preload. A dynamic buffer fill circuit may be incorporated for automatically selecting the buffer fill level as a function of the difference in clock frequencies of the two equipments. Controllable alarm circuitry is provided for selectively generating an underflow or an overflow alarm to one or both of the communicating equipments. 5 figs.

George, M.; Pierson, L.G.; Wilkins, M.E.

1987-11-09T23:59:59.000Z

177

Control filamentous bulking caused by chlorine-resistant Type 021N bacteria through adding a biocide CTAB  

Science Journals Connector (OSTI)

Filamentous bulking sludge due to excessive growth of filamentous bacteria is a serious operational problem in activated sludge plants. The addition of chemicals is one of widespread ways to control filamentous bulking. In this study, filamentous bulking in a continuous activated sludge system was found to be mainly caused by Eikelboom Type 021N filamentous bacteria likely due to low substrate concentration gradients. These Type 021N bacteria were found to be resistant to chlorination, maintaining cell integrity at a dosage of up to 80 mg Cl/gSS. An alternative biocidal agent, cetyltrimethyl ammonium bromide (CTAB), exhibited a much stronger biocidal effect on these filaments, which significantly improved sludge settleability. Type 021N with filamentous index of 5 was selectively killed, but floc-formers recovery their activity after CTAB termination. The study implied that CTAB might have more penetration capacity to cell wall of chlorine-resistant Type 021N bacteria. We therefore suggest the penetration property of filament cell wall should be considered or tested before the selection of biocide type in practice.

Jianhua Guo; Yongzhen Peng; Zhongwei Wang; Zhiguo Yuan; Xiong Yang; Shuying Wang

2012-01-01T23:59:59.000Z

178

Bulk viscosity, chemical equilibration and flow at RHIC  

E-Print Network [OSTI]

We study the effects of bulk viscosity on p_T spectra and elliptic flow in heavy ion collisions at RHIC. We argue that direct effect of the bulk viscosity on the evolution of the velocity field is small, but corrections to the freezeout distributions can be significant. These effects are dominated by chemical non-equilibration in the hadronic phase. We show that a non-zero bulk viscosity in the range $\\zeta/s \\lsim 0.05$ improves the description of spectra and flow at RHIC.

Thomas Schaefer; Kevin Dusling

2012-10-15T23:59:59.000Z

179

Brane-Bulk energy exchange and agegraphic dark energy  

E-Print Network [OSTI]

We consider the agegraphic models of dark energy in a braneworld scenario with brane-bulk energy exchange. We assume that the adiabatic equation for the dark matter is satisfied while it is violated for the agegraphic dark energy due to the energy exchange between the brane and the bulk. Our study shows that with the brane-bulk interaction, the equation of state parameter of agegraphic dark energy on the brane, $w_D$, can have a transition from normal state where $w_D >-1 $ to the phantom regime where $w_D energy always satisfies $w^{\\mathrm{eff}}_D\\geq-1$.

Ahmad Sheykhi

2010-02-06T23:59:59.000Z

180

The impact on transmission line terminations on radiated emissions.  

E-Print Network [OSTI]

??Terminating transmission lines at either the source or the load end with a damping resistor is frequently used to improve the signal integrity of clock… (more)

Wong, Wei-Juet

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Self-terminating diffraction gates femtosecond X-ray nanocrystallograp...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Self-terminating diffraction gates femtosecond X-ray nanocrystallography measurements Authors: Barty, A., Caleman, C., Aquila, A., Timneanu, N., Lomb, L., White, T. A., Andreasson,...

182

Fuel transfer system  

DOE Patents [OSTI]

A nuclear fuel bundle fuel transfer system includes a transfer pool containing water at a level above a reactor core. A fuel transfer machine therein includes a carriage disposed in the transfer pool and under the water for transporting fuel bundles. The carriage is selectively movable through the water in the transfer pool and individual fuel bundles are carried vertically in the carriage. In a preferred embodiment, a first movable bridge is disposed over an upper pool containing the reactor core, and a second movable bridge is disposed over a fuel storage pool, with the transfer pool being disposed therebetween. A fuel bundle may be moved by the first bridge from the reactor core and loaded into the carriage which transports the fuel bundle to the second bridge which picks up the fuel bundle and carries it to the fuel storage pool. 6 figures.

Townsend, H.E.; Barbanti, G.

1994-03-01T23:59:59.000Z

183

Fuel transfer system  

DOE Patents [OSTI]

A nuclear fuel bundle fuel transfer system includes a transfer pool containing water at a level above a reactor core. A fuel transfer machine therein includes a carriage disposed in the transfer pool and under the water for transporting fuel bundles. The carriage is selectively movable through the water in the transfer pool and individual fuel bundles are carried vertically in the carriage. In a preferred embodiment, a first movable bridge is disposed over an upper pool containing the reactor core, and a second movable bridge is disposed over a fuel storage pool, with the transfer pool being disposed therebetween. A fuel bundle may be moved by the first bridge from the reactor core and loaded into the carriage which transports the fuel bundle to the second bridge which picks up the fuel bundle and carries it to the fuel storage pool.

Townsend, Harold E. (Campbell, CA); Barbanti, Giancarlo (Cupertino, CA)

1994-01-01T23:59:59.000Z

184

ARM - Campaign Instrument - ec-convair580-bulk  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

govInstrumentsec-convair580-bulk govInstrumentsec-convair580-bulk Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign Instrument : Environment Canada Convair 580 Bulk Parameters (EC-CONVAIR580-BULK) Instrument Categories Aerosols, Cloud Properties, Airborne Observations Campaigns Indirect and Semi-Direct Aerosol Campaign (ISDAC) [ Download Data ] North Slope Alaska, 2008.04.01 - 2008.04.30 Primary Measurements Taken The following measurements are those considered scientifically relevant. Refer to the datastream (netcdf) file headers for the list of all available measurements, including those recorded for diagnostic or quality assurance purposes. Ice water content Liquid water content Hydrometeor size Cloud particle number concentration Aerosol concentration

185

Bulk Energy Storage Webinar Rescheduled for February 9, 2012 | Department  

Broader source: Energy.gov (indexed) [DOE]

Bulk Energy Storage Webinar Rescheduled for February 9, 2012 Bulk Energy Storage Webinar Rescheduled for February 9, 2012 Bulk Energy Storage Webinar Rescheduled for February 9, 2012 February 1, 2012 - 12:48pm Addthis The U.S. Department of Energy (DOE) and the Iowa Stored Energy Park (ISEP) are conducting a free, 1-hour webinar, Lessons from Iowa: The Economic, Market, and Organizational Issues in Making Bulk Energy Storage Work, on Thursday, February 9, 2012 at 1 p.m. ET. Presenters include Dr. Imre Gyuk of DOE's Office of Electricity Deliverability and Energy Reliability and Bob Schulte from ISEP. The webinar was original scheduled for January 20, 2012, but experienced technical difficulties due to the large number of participants and was rescheduled. All participants must reregister. Funded by a DOE grant and managed by Sandia National Laboratories, ISEP's

186

Design of Bulk Nanocomposites as High Efficiency Thermoelectric Materials |  

Office of Science (SC) Website

Design of Bulk Nanocomposites as High Design of Bulk Nanocomposites as High Efficiency Thermoelectric Materials Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights Highlight Archives News & Events Publications Contact BES Home 04.27.12 Design of Bulk Nanocomposites as High Efficiency Thermoelectric Materials Print Text Size: A A A RSS Feeds FeedbackShare Page Scientific Achievement A newly synthesized bulk thermoelectric material that contains nanocrystals with the same orientation and structure as the host material breaks thermoelectric efficiency records by blocking thermal, but not electrical, conductivity. Significance and Impact A new strategy to design inexpensive materials that more efficiently convert heat to electricity. Research Details Thermoelectric materials directly generate electrical power from heat, but

187

Producing bulk residual stresses in gas turbine blades  

Science Journals Connector (OSTI)

Inhomogeneous plastic strain has been used to produce a pattern of bulk compressive stresses that counteract macrodefect formation and growth in machine components, which increases the working life. Studies ha...

V. A. Boguslaev; A. P. Lopatenko; N. B. Makarenko; N. I. Obodan

1993-02-01T23:59:59.000Z

188

Bulk viscosity of anisotropically expanding hot QCD plasma  

SciTech Connect (OSTI)

The bulk viscosity, {zeta} and its ratio with the shear viscosity, {zeta}/{eta} have been studied in an anisotropically expanding pure glue plasma in the presence of turbulent color fields. It has been shown that the anisotropy in the momentum distribution function of gluons, which has been determined from a linearized transport equation eventually leads to the bulk viscosity. For the isotropic (equilibrium) state, a recently proposed quasiparticle model of pure SU(3) lattice QCD equation of state has been employed where the interactions are encoded in the effective fugacity. It has been argued that the interactions present in the equation of state, significantly contribute to the bulk viscosity. Its ratio with the shear viscosity is significant even at 1.5T{sub c}. Thus, one needs to take in account the effects of the bulk viscosity while studying the hydrodynamic expansion of quark-gluon plasma in the Relativistic Heavy Ion Collider and the Large Hadron Collider.

Chandra, Vinod [Department of Theoretical Physics, Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai-400005 (India)

2011-11-01T23:59:59.000Z

189

Bulk viscosity in nuclear and quark matter: A short review  

E-Print Network [OSTI]

The history and recent progresses in the study of bulk viscosity in nuclear and quark matter are reviewed. The constraints from baryon number conservation and electric neutrality in quark matter on particle densities and fluid velocity divergences are discussed.

Hui Dong; Nan Su; Qun Wang

2007-02-07T23:59:59.000Z

190

Solar Heating Test Design Facility for Bulk PCM Storage  

Science Journals Connector (OSTI)

This experimentation, conducted by the “Centre d’Energétique de l’ENSMP”, was designed to analyze the interest of bulk PCM storage centralized in a real water active solar heating system consisting of a low tempe...

P. Achard; B. Amann; D. Mayer

1984-01-01T23:59:59.000Z

191

Stresses resulting from compression of bulk cotton lint fibers  

E-Print Network [OSTI]

The modulus of elasticity, Poisson's ratio and shear modulus of bulk cotton lint fibers were determined. The cotton lint was compressed in an MTS machine to a predetermined density, and the resilient forces induced by the cotton lint after being...

Chimbombi, Ezekiel Maswe

1998-01-01T23:59:59.000Z

192

A bulk-flow model of angled injection Lomakin bearings  

E-Print Network [OSTI]

A bulk-flow model for determination of the leakage and dynamic force characteristics of angled injection Lomakin bearings is presented. Zeroth- and first-order equations describe the equilibrium flow for a centered bearing and the perturbed flow...

Soulas, Thomas Antoine Theo

2001-01-01T23:59:59.000Z

193

Study of organic solar cells with stacked bulk heterojunction structure  

Science Journals Connector (OSTI)

Organic solar cells with stacked bulk heterojunction(BHJ) are investigated ... as inter-layer to connect the upper BHJ cell and the lower cell. The structures are ITO/PEDOT:PSS/MEH...V OC) of a st...

Xin-fang Zhang; Zheng Xu; Su-ling Zhao; Fu-jun Zhang; Yan Li…

2008-07-01T23:59:59.000Z

194

Photonic integration in a commercial scaled bulk-CMOS process  

E-Print Network [OSTI]

We demonstrate the first photonic chip designed for a commercial bulk CMOS process (65 nm-node) using standard process layers combined with post-processing, enabling dense photonic integration with high-performance ...

Kaertner, Franz X.

195

Proposal of a Bulk HTSC Staggered Array Undulator  

SciTech Connect (OSTI)

We proposed a new type of undulator based on bulk high-T{sub c} superconductors (HTSC) which consists of a single solenoid and a stacked array of bulk HTSC. The main advantage of this configuration is that a mechanical structure is not required to produce and control the undulator field. In order to perform a proof of principle experiment, we have developed a prototype of bulk HTSC staggered array undulator using 11 pairs of DyBaCuO bulk superconductors and a normal conducting solenoid. Experimental results obtained by using the prototype undulator and numerical results obtained by a loop current model based on the Bean mode for a type-II superconductor were compared.

Kii, Toshiteru; Kinjo, Ryota; Bakr, Mahmoud A.; Sonobe, Taro; Higashimura, Keisuke; Masuda, Kai; Ohgaki, Hideaki; Yoshida, Kyohei [Institute of Advanced Energy, Kyoto University, Kyoto, 611-0011 (Japan); Zen, Heisyun [Institute for Molecular Science, National Institute of Natural Sciences, Aichi 444-8585 (Japan)

2010-06-23T23:59:59.000Z

196

CMI Unique Facility: Bulk Combinatoric Materials Synthesis Facility...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

is in the form of a thin film. CMI researchers at The Ames Laboratory have adapted an additive manufacturing tool (sometimes known as a "3-D printer") to produce arrays of bulk...

197

Battery system including batteries that have a plurality of positive terminals and a plurality of negative terminals  

DOE Patents [OSTI]

A lithium battery for use in a vehicle includes a container, a plurality of positive terminals extending from a first end of the lithium battery, and a plurality of negative terminals extending from a second end of the lithium battery. The plurality of positive terminals are provided in a first configuration and the plurality of negative terminals are provided in a second configuration, the first configuration differing from the second configuration. A battery system for use in a vehicle may include a plurality of electrically connected lithium cells or batteries.

Dougherty, Thomas J; Symanski, James S; Kuempers, Joerg A; Miles, Ronald C; Hansen, Scott A; Smith, Nels R; Taghikhani, Majid; Mrotek, Edward N; Andrew, Michael G

2014-01-21T23:59:59.000Z

198

Bulk viscosity and the conformal anomaly in the pion gas  

E-Print Network [OSTI]

We calculate the bulk viscosity of the massive pion gas within Unitarized Chiral Perturbation Theory. We obtain a low temperature peak arising from explicit conformal breaking due to the pion mass and another peak near the critical temperature, dominated by the conformal anomaly through gluon condensate terms. The correlation between bulk viscosity and conformal breaking supports a recent QCD proposal. We discuss the role of resonances, heavier states and large-$N_c$ counting.

D. Fernandez-Fraile; A. Gomez Nicola

2008-09-26T23:59:59.000Z

199

Costs, Savings and Financing Bulk Tanks on Texas Dairy Farms.  

E-Print Network [OSTI]

\\ BULLETIN 904 MAY 1958 .t(. :a ,s - / cwdh\\@ Costs, Savi~gs;.itd Financing Bulk Tanks on Texas Dairy Farms . ?. I I 1 i I I ! ,:ravings in hauling - 10 cents I \\ \\ 1 \\ savings in hauling - 15 cents -----------____--- 'savings... in hauling - 20 cents Annual production, 1,000 pounds Estimated number of years required for savings from a bulk tank to equal additional costs at different levels of production and savings in hauling costs. TEXAS AGRICULTURAL EXPERIMEN'T STATION R. D...

Moore, Donald S.; Stelly, Randall; Parker, Cecil A.

1958-01-01T23:59:59.000Z

200

Compositional ordering and stability in nanostructured, bulk thermoelectric alloys.  

SciTech Connect (OSTI)

Thermoelectric materials have many applications in the conversion of thermal energy to electrical power and in solid-state cooling. One route to improving thermoelectric energy conversion efficiency in bulk material is to embed nanoscale inclusions. This report summarize key results from a recently completed LDRD project exploring the science underpinning the formation and stability of nanostructures in bulk thermoelectric and the quantitative relationships between such structures and thermoelectric properties.

Hekmaty, Michelle A.; Faleev, S.; Medlin, Douglas L.; Leonard, F.; Lensch-Falk, J.; Sharma, Peter Anand; Sugar, J. D.

2009-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Technology Transfer: About the Technology Transfer Department  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About the Technology Transfer and Intellectual Property Management About the Technology Transfer and Intellectual Property Management Department The Technology Transfer Department helps move technologies from the Lab to the marketplace to benefit society and the U. S. economy. We accomplish this through developing and managing an array of partnerships with the private and public sectors. What We Do We license a wide range of cutting-edge technologies to companies that have the financial, R & D, manufacturing, marketing, and managerial capabilities to successfully commercialize Lab inventions. In addition, we manage lab-industry research partnerships, ensure that inventions receive appropriate patent or copyright protection, license technology to start-up companies, distribute royalties to the Lab and to inventors and serve as

202

NREL: Technology Transfer - About Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About Technology Transfer About Technology Transfer Through technology partnerships, NREL seeks to reduce private sector risk and enable investment in the adoption of renewable energy and energy efficiency technologies. The transfer of these technologies to the marketplace helps displace oil, reduce carbon emissions, and increase U.S. industry competitiveness. Principles NREL develops and implements technology partnerships based on the standards established by the following principles: Balancing Public and Private Interest Form partnerships that serve the public interest and advance U.S. Department of Energy goals. Demonstrate appropriate stewardship of publicly funded assets, yielding national benefits. Provide value to the commercial partner. Focusing on Outcomes Develop mutually beneficial collaborations through processes, which are

203

Partnerships and Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Partnerships and Technology Transfer User Facilities Visiting Us Contact Us Home About Us Success Stories Events News ORNL Inventors (internal only) Find a Technology Search go...

204

Technology Transfer Ombudsman Program  

Broader source: Energy.gov [DOE]

The Technology Transfer Commercialization Act of 2000, Public Law 106-404 (PDF) was enacted in November 2000.  Pursuant to Section 11, Technology Partnerships Ombudsman, each DOE national...

205

Facility Survey & Transfer  

Broader source: Energy.gov [DOE]

As DOE facilities become excess, many that are radioactively and/or chemically contaminated will become candidate for transfer to DOE-EM for deactivation and decommissioning.

206

MATERIALS TRANSFER AGREEMENT  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MTAXX-XXX 1 MATERIAL TRANSFER AGREEMENT for Manufacturing Demonstration Facility and Carbon Fiber Technology Facility In order for the RECIPIENT to obtain materials, the RECIPIENT...

207

Tunable transfer | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to microbes by studying that transfer in a nature-inspired, protein and iron-based nanoparticle system. Iron plays a crucial role in environmental biogeochemistry. It readily...

208

Heat transfer dynamics  

SciTech Connect (OSTI)

As heat transfer technology increases in complexity, it becomes more difficult for those without thermal dynamics engineering training to choose between competitive heat transfer systems offered to meet their drying requirements. A step back to the basics of heat transfer can help professional managers and papermakers make informed decisions on alternative equipment and methods. The primary forms of heat and mass transfer are reviewed with emphasis on the basics, so a practical understanding of each is gained. Finally, the principles and benefits of generating infrared energy by combusting a gaseous hydrocarbon fuel are explained.

Smith, T.M. (Marsden, Inc., Pennsauken, NJ (United States))

1994-08-01T23:59:59.000Z

209

Finsler geometric perspective on the bulk flow in the universe  

E-Print Network [OSTI]

Astronomical observations showed that there may exist a bulk flow with peculiar velocities in the universe, which contradicts with the (\\Lambda)CDM model. The bulk flow reveals that the observational universe is anisotropic at large scales. In fact, a more reliable observation on the anisotropy of spacetime comes from the CMB power spectra. The WMAP and Planck satellites both show that there is a hemispherical power asymmetry at large-angular scales. In this paper, we propose a "wind" scenario to the bulk flow (or the anisotropy of spacetime). Under the influence of the "wind", the spacetime metric could become a Finsler structure. By resolving the null geodesic equation, we obtain the modified luminosity distance, which has a dipolar form at the leading order. Thus, the "wind" describes well the bulk flow. In addition, we perform a least-(\\chi^2) fit to the data of type Ia supernovae (SNe Ia) in the Union2.1 compilation. The peculiar velocity of the bulk flow has an upper limit (v_{bulk}\\lesssim 4000 \\rm{km/s}), which is compatible with all the existing observational values.

Zhe Chang; Ming-Hua Li; Sai Wang

2013-03-07T23:59:59.000Z

210

Visual Simulation of Offshore Liquefied Natural Gas (LNG) Terminals  

E-Print Network [OSTI]

Visual Simulation of Offshore Liquefied Natural Gas (LNG) Terminals in a Decision-Making Context1, Berkeley. 3/ Liquified Natural Gas Act Stats, 1977, Chap. 855, Page 2506 (effective Sept. 17, 1977 potential offshore Liquified Natural Gas (LNG) sites and the types of terminals that might occupy those

Standiford, Richard B.

211

Columbia River : Terminal Fisheries Research Report : Annual Report 1994.  

SciTech Connect (OSTI)

In 1993 the Northwest Power Planning Council recommended in its Strategy for Salmon that terminal fishing sites be identified and developed. The Council called on the Bonneville Power Administration to fund a 10-year study to investigate the feasibility of creating and expanding terminal known stock fisheries in the Columbia River Basin.

Hirose, Paul; Miller, Marc; Hill, Jim

1996-12-01T23:59:59.000Z

212

LM79XX Series 3-Terminal Negative Regulators  

E-Print Network [OSTI]

LM79XX Series 3-Terminal Negative Regulators General Description The LM79XX series of 3-terminal external component -- a compensation ca- pacitor at the output. The LM79XX series is packaged in the TO-220 conditions. Low ground pin current of the LM79XX series allows output voltage to be easily boosted above

Berns, Hans-Gerd

213

Termination of Just/Fair Computations in Term Rewriting  

E-Print Network [OSTI]

Termination of Just/Fair Computations in Term Rewriting Salvador Lucas a Jos´e Meseguer b a for prov- ing termination of concurrent systems under fairness assumptions. Specifically, Salvador Lucas-02-1-0715 and NSF Grant CCR-0234524. Email addresses: slucas@dsic.upv.es (Salvador Lucas), meseguer@cs.uiuc.edu (Jos

Lucas, Salvador

214

Performance of ECM controlled VAV fan powered terminal units  

E-Print Network [OSTI]

2006). The airflow and power consumption performance models had an R2 equal to 0.990 or greater for every terminal unit tested. An air leakage model was employed to account for leakage in the parallel designed VAV terminal units when the internal fan...

Cramlet, Andrew Charles

2009-05-15T23:59:59.000Z

215

Solar Cells: Spin-Cast Bulk Heterojunction Solar Cells: A Dynamical...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solar Cells: Spin-Cast Bulk Heterojunction Solar Cells: A Dynamical Investigation Solar Cells: Spin-Cast Bulk Heterojunction Solar Cells: A Dynamical Investigation Print Wednesday,...

216

A Combined FTIR and TPD Study on the Bulk and Surface Dehydroxylation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and TPD Study on the Bulk and Surface Dehydroxylation and Decarbonation of Synthetic Goethite. A Combined FTIR and TPD Study on the Bulk and Surface Dehydroxylation and...

217

The Role of Surface Chemistry and Bulk Properties on the Cycling...  

Broader source: Energy.gov (indexed) [DOE]

The Role of Surface Chemistry and Bulk Properties on the Cycling and Rate Capability of Lithium Positive Electrode Materials The Role of Surface Chemistry and Bulk Properties on...

218

new freshmen new transfers  

E-Print Network [OSTI]

for AP courses. Transfer GPA is based on a 4-point scale. #12;ETHNICITY African American/Black Am Indian% Number 48 81 GENDER Male Female ETHNICITY African American Am Indian/AK Native Asian Hispanic Pacificth %-ile 690 740 710 31 Transfers 3.67 Freshman GPA is calculated taking into account a 5-point scale

Koehler, Carla

219

ANALYSES AND COMPARISON OF BULK AND COIL SURFACE SAMPLES FROM THE DWPF SLURRY MIX EVAPORATOR  

SciTech Connect (OSTI)

Sludge samples from the DWPF Slurry Mix Evaporator (SME) heating coil frame and coil surface were characterized to identify differences that might help identify heat transfer fouling materials. The SME steam coils have seen increased fouling leading to lower boil-up rates. Samples of the sludge were taken from the coil frame somewhat distant from the coil (bulk tank material) and from the coil surface (coil surface sample). The results of the analysis indicate the composition of the two SME samples are very similar with the exception that the coil surface sample shows {approx}5-10X higher mercury concentration than the bulk tank sample. Elemental analyses and x-ray diffraction results did not indicate notable differences between the two samples. The ICP-MS and Cs-137 data indicate no significant differences in the radionuclide composition of the two SME samples. Semi-volatile organic analysis revealed numerous organic molecules, these likely result from antifoaming additives. The compositions of the two SME samples also match well with the analyzed composition of the SME batch with the exception of significantly higher silicon, lithium, and boron content in the batch sample indicating the coil samples are deficient in frit relative to the SME batch composition.

Hay, M.; Nash, C.; Stone, M.

2012-02-17T23:59:59.000Z

220

Transfers | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Transfers Transfers Transfers Transfer means a change of an employee, from one Federal government branch (executive, legislative, judicial) to another or from one agency to another without a break in service of 1 full work day. Below are a few tips to better assist you when you transer agencies: If you have any dependents you must complete a standard Form 2809 during new employee orientation as this information does not transfer over automatically. You will not be able to change your coverage until open season or a life changing event occurs. At the time of new employee orientation you must provide your most recent leave and earning statement (LES) so that your leave may be updated accordingly. If you do not provide us with this document it will take approximately 6 weeks before your annual and sick leave is updated.

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Data Transfer Examples  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

» Data Transfer Examples » Data Transfer Examples Data Transfer Examples Moving data to Projectb Projectb is where data should be written from jobs running on the cluster or Gpints. There are intermediate files or bad results from a run that didn't work out that don't need to be saved. By running these jobs in the SCRATCH areas, these files will be deleted for you by the puge. If you run in the SANDBOX, you will have to clean up after yourselves. Batch Scheduled Transfers Use any queues to schedule jobs that move data to Projectb. A basic transfer script is here: kmfagnan@genepool12 ~ $ cat data_to_projb.sh #!/bin/bash -l #$ -N data2projb /projectb/scratch// kmfagnan@genepool12 ~ $ qsub data_to_projb.sh

222

Photoinduced electron transfer from rail to rung within a self-assembled oligomeric porphyrin ladder  

SciTech Connect (OSTI)

Photoinduced electron transfer in a self-assembled supramolecular ladder structure comprising oligomeric porphyrin rails and ligated dipyridyltetrazine rungs was characterized by transient absorption spectroscopy and transient direct current photoconductivity to be mainly from an oligomer (rail) to the center of a terminal tetrazine (rung), with the remaining hole being delocalized on the oligomer and subsequent charge recombination in 0.19 ns.

She, Chunxing; Lee, Suk Joong; McGarrah, James E.; Vura-Weis, Josh; Wasielewski, Michael; Chen, Hanning; Schatz, George C.; Ratner, Mark A.; Hupp, Joseph T.

2010-01-01T23:59:59.000Z

223

Dark goo: bulk viscosity as an alternative to dark energy  

SciTech Connect (OSTI)

We present a simple (microscopic) model in which bulk viscosity plays a role in explaining the present acceleration of the universe. The effect of bulk viscosity on the Friedmann equations is to turn the pressure into an 'effective' pressure containing the bulk viscosity. For a sufficiently large bulk viscosity, the effective pressure becomes negative and could mimic a dark energy equation of state. Our microscopic model includes self-interacting spin-zero particles (for which the bulk viscosity is known) that are added to the usual energy content of the universe. We study both background equations and linear perturbations in this model. We show that a dark energy behavior is obtained for reasonable values of the two parameters of the model (i.e. the mass and coupling of the spin-zero particles) and that linear perturbations are well-behaved. There is no apparent fine tuning involved. We also discuss the conditions under which hydrodynamics holds, in particular that the spin-zero particles must be in local equilibrium today for viscous effects to be important.

Gagnon, Jean-Sebastien [Technische Universität Darmstadt, Schlossgartenstrasse 2, 64289, Darmstadt (Germany); Lesgourgues, Julien, E-mail: jean-sebastien.gagnon@physik.tu-darmstadt.de, E-mail: julien.lesgourgues@cern.ch [École Polytechnique Fédérale de Lausanne, CH-1015, Lausanne (Switzerland)

2011-09-01T23:59:59.000Z

224

Bulk emission of scalars by a rotating black hole  

E-Print Network [OSTI]

We study in detail the scalar-field Hawking radiation emitted into the bulk by a higher-dimensional, rotating black hole. We numerically compute the angular eigenvalues, and solve the radial equation of motion in order to find transmission factors. The latter are found to be enhanced by the angular momentum of the black hole, and to exhibit the well-known effect of superradiance. The corresponding power spectra for scalar fields show an enhancement with the number of dimensions, as in the non-rotating case. We compute the total mass loss rate of the black hole for a variety of black-hole angular momenta and bulk dimensions, and find that, in all cases, the bulk emission remains significantly smaller than the brane emission. The angular-momentum loss rate is also computed and found to have a smaller value in the bulk than on the brane. We present accurate bulk-to-brane emission ratios for a range of scenarios.

M. Casals; S. R. Dolan; P. Kanti; E. Winstanley

2008-07-17T23:59:59.000Z

225

Performance testing of the Sandy Pond HVDC converter terminal  

SciTech Connect (OSTI)

Results of several performance tests for the 1,800 MW Sandy Pond HVDC converter terminal are presented and discussed. The work progressed during 1990 and 1991 and included tests for power line carrier interference, audible sound, ac and dc line faults and dc harmonic performance. The testing was conducted as part of the commissioning program for the first stage of the Quebec-New England Phase 2 multi-terminal system. In this stage, the Radisson (Quebec) and Sandy Pond (New England) terminals are operational.

Donahue, J.A.; Fisher, D.A.; Railing, B.D.; Tatro, P.J. (New England Power Service Co., Westborough, MA (United States))

1993-01-01T23:59:59.000Z

226

High Accuracy Predictions of the Bulk Properties of Water | Argonne  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High Accuracy Predictions of the Bulk Properties of Water High Accuracy Predictions of the Bulk Properties of Water High Accuracy Predictions of the Bulk Properties of Water PI Name: Mark Gordon PI Email: mark@si.msg.chem.iastate.edu Institution: Iowa State University Allocation Program: ESP Allocation Hours at ALCF: 150 Million Year: 2010 to 2013 Research Domain: Chemistry Among the ab initio methods, second-order perturbation theory (MP2) predicts highly accurate structures and relative energies for water clusters. Researchers will carry out molecular dynamics simulations of water at the MP2 level. However, full MP2 calculations of even modest-sized water clusters are far too time-consuming for dynamical simulations, even on the next-generation Blue Gene. Therefore, a key element of the current approach will be the use of MP2 in conjunction with the Fragment Molecular

227

Bulk Viscosity, Decaying Dark Matter, and the Cosmic Acceleration  

E-Print Network [OSTI]

We discuss a cosmology in which cold dark-matter particles decay into relativistic particles. We argue that such decays could lead naturally to a bulk viscosity in the cosmic fluid. For decay lifetimes comparable to the present hubble age, this bulk viscosity enters the cosmic energy equation as an effective negative pressure. We investigate whether this negative pressure is of sufficient magnitude to account fo the observed cosmic acceleration. We show that a single decaying species in a flat, dark-matter dominated cosmology without a cosmological constant cannot reproduce the observed magnitude-redshift relation from Type Ia supernovae. However, a delayed bulk viscosity, possibly due to a cascade of decaying particles may be able to account for a significant fraction of the apparent cosmic acceleration. Possible candidate nonrelativistic particles for this scenario include sterile neutrinos or gauge-mediated decaying supersymmetric particles.

James R. Wilson; Grant J. Mathews; George M. Fuller

2006-09-25T23:59:59.000Z

228

Technology Transfer Reporting Form | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Transfer Reporting Form Technology Transfer Reporting Form Technology Transfer Reporting Form More Documents & Publications Technology Partnership Ombudsman - Roles,...

229

Bulk viscosity of strongly coupled plasmas with holographic duals  

E-Print Network [OSTI]

We explain a method for computing the bulk viscosity of strongly coupled thermal plasmas dual to supergravity backgrounds supported by one scalar field. Whereas earlier investigations required the computation of the leading dissipative term in the dispersion relation for sound waves, our method requires only the leading frequency dependence of an appropriate Green's function in the low-frequency limit. With a scalar potential chosen to mimic the equation of state of QCD, we observe a slight violation of the lower bound on the ratio of the bulk and shear viscosities conjectured in arXiv:0708.3459.

Steven S. Gubser; Silviu S. Pufu; Fabio D. Rocha

2008-06-02T23:59:59.000Z

230

Bulk viscosity of the gluon plasma in a holographic approach  

E-Print Network [OSTI]

A gravity-scalar model in 5-dim. Riemann space is adjusted to the thermodynamics of SU(3) gauge field theory in the temperature range 1 - 10 $T/T_c$ to calculate holographically the bulk viscosity in 4-dim. Minkowski space. Various settings are compared, and it is argued that, upon an adjustment of the scalar potential to reproduce exactly the lattice data within a restricted temperature interval above $T_c$, rather robust values of the bulk viscosity to entropy density ratio are obtained.

R. Yaresko; B. Kampfer

2014-03-14T23:59:59.000Z

231

VOLUNTARY LEAVE TRANSFER PROGRAM  

Broader source: Energy.gov (indexed) [DOE]

VOLUNTARY LEAVE TRANSFER PROGRAM VOLUNTARY LEAVE TRANSFER PROGRAM (Eligible employees are listed at the end of this narrative) Under the Voluntary Leave Transfer Program you can apply, based on a medical emergency, to receive annual leave donated by other employees. A medical emergency is generally defined as a medical condition of the employee or family member that is likely to keep you (the employee) away from work and cause a loss of pay of at least 24 hours. You are required to submit an Office of Personnel Management (OPM) Form 630, Application to Become A Leave Recipient Under the Voluntary Leave Transfer Program, through your supervisor to be considered for the program. The application must include an explanation of the reason the donation is needed (including a brief description of the

232

Technology Transfer Summit  

Broader source: Energy.gov (indexed) [DOE]

Agenda as of April 9, 2012 Agenda as of April 9, 2012 Technology Transfer Summit April 16, 2012 IMC - Trinity Ballroom 4 8:00 - 8:10 Welcome & Introduction Pete Tseronis, DOE Chief Technology Officer 8:10 - 8:50 Accelerating Transfer Within an Innovation Ecosystem Debra M. Amidon, Founder and Chief Strategist, ENTOVATION International, and Author, The Innovation SuperHighway 8:50 - 9:20 Tech Transfer - Predicaments, Perplexities, and Possible Panaceas Rex Northen, Executive Director, Cleantech Open 9:20 - 9:50 A Systems Approach to Innovation Mike Schwenk, Vice President and Director Technology Deployment and Outreach, Pacific Northwest National Laboratory (PNNL) 9:50 - 10:15 DOE's Online Tech Transfer Ecosystem - aka...Stop Building Moai! Robert Bectel, Senior Policy Advisor / Chief Technology Officer

234

VOLUNTARY LEAVE TRANSFER PROGRAM  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

VOLUNTARY LEAVE TRANSFER PROGRAM LIST Name Organization Fairbanks, Mary H. AU Garnett-Harris, Deborah A. AU James, Debra A. AU Johnston, Robyne AU May, Melanie P. AU Pickens,...

235

Smoothness- transferred random field  

E-Print Network [OSTI]

We propose a new random field (RF) model, smoothness-transfer random field (ST-RF) model, for image modeling. In the objective function of RF models, smoothness energy is defined with compatibility function to capture the ...

Wei, Donglai

2013-01-01T23:59:59.000Z

236

Technology Transfer Office November 2009  

E-Print Network [OSTI]

Technology Transfer Office November 2009 INVENTION AGREEMENT In consideration of my employment in writing to Dartmouth through the Technology Transfer Office any such discovery or invention and identify

Myers, Lawrence C.

237

Sandia National Laboratories: technology transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

technology transfer Federal Laboratory Consortium Regional Technology-Transfer Awards Salute Innovation, Commercialization at Sandia On September 23, 2014, in Capabilities, Carbon...

238

Ames Lab 101: Technology Transfer  

SciTech Connect (OSTI)

Ames Laboratory Associate Laboratory Director, Sponsored Research Administration, Debra Covey discusses technology transfer. Covey also discusses Ames Laboratory's most successful transfer, lead-free solder.

Covey, Debra

2010-01-01T23:59:59.000Z

239

Ombuds Services for Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tech Transfer Ombuds Ombuds Services for Technology Transfer Committed to the fair and equitable treatment of all employees, contractors, and persons doing business with the...

240

Shielded cells transfer automation  

SciTech Connect (OSTI)

Nuclear waste from shielded cells is removed, packaged, and transferred manually in many nuclear facilities. Radiation exposure is absorbed by operators during these operations and limited only through procedural controls. Technological advances in automation using robotics have allowed a production waste removal operation to be automated to reduce radiation exposure. The robotic system bags waste containers out of glove box and transfers them to a shielded container. Operators control the system outside the system work area via television cameras. 9 figures.

Fisher, J J

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Influence of roughness on near-field heat transfer between two plates  

E-Print Network [OSTI]

The surface roughness correction to the near-field heat transfer between two rough bulk materials is discussed by using second-order perturbation theory. The results allow for estimating the impact of surface roughness to the heat transfer in recent experiments between two plates and between a microsphere and a plate (using the Derjaguin approximation). Furthermore, we show that the proximity approximation for describing rough surfaces is valid for distances much smaller than the correlation length of the surface roughness even if the heat transfer is dominated by the coupling of surface modes.

Svend-Age Biehs; Jean-Jacques Greffet

2011-03-11T23:59:59.000Z

242

Modeling heat transfer in supercritical fluid using the lattice Boltzmann method  

Science Journals Connector (OSTI)

A lattice Boltzmann model has been developed to simulate heat transfer in supercritical fluids. A supercritical viscous fluid layer between two plates heated from the bottom has been studied. It is demonstrated that the model can be used to study heat transfer near the critical point where the so-called piston effect speeds up the transfer of heat and results in homogeneous heating in the bulk of the layer. We have also studied the onset of convection in a Rayleigh-Bénard configuration. It is shown that our model can well predict qualitatively the onset of convection near the critical point, where there is a crossover between the Rayleigh and Schwarzschild criteria.

Gábor Házi and Attila Márkus

2008-02-21T23:59:59.000Z

243

Calculation and Use of Peaking Factors for Remote Terminal Emulation  

Science Journals Connector (OSTI)

An important goal of the remote terminal emulator-driven tests described here was obtaining a representative test workload. Reaching this goal depended on (i) imposing the test workload in a representative manner, (ii) using representative types of user ...

William A. Ward, Jr.; David Langan

2000-03-01T23:59:59.000Z

244

Calculation and Use of Peaking Factors for Remote Terminal Emulation  

Science Journals Connector (OSTI)

An important goal of the remote terminal emulator-driven tests described here was obtaining a representative test workload. Reaching this goal depended on (i) imposing the test workload in a representative man...

William A. Ward Jr.; David D. Langan

2000-01-01T23:59:59.000Z

245

A Power Optimized Display Memory Organization for Handheld User Terminals  

Science Journals Connector (OSTI)

Today's handheld devices become more and more multimedia capable. One subsystem of a multimedia terminal that accounts for a considerable amount of the total power consumption is the display unit. The backlight is the major culprit there. As new display ...

Lieven Hollevoet; Andy Dewilde; Kristof Denolf; Francky Catthoor; Filip Louagie

2004-02-01T23:59:59.000Z

246

California's LNG Terminals: The Promise of New Gas Supplies  

Broader source: Energy.gov [DOE]

Presentation covers California's LNG terminals and is given at the Federal Utility Partnership Working Group (FUPWG) Fall Meeting, held on November 28-29, 2007 in San Diego, California.

247

Terminal area flight path generation using parallel constraint propagation  

E-Print Network [OSTI]

A Flight Path Generator is defined as the module of an automated Air Traffic Control system which plans aircraft trajectories in the terminal area with respect to operational constraints. The flight path plans have to be ...

Sadoune, Michel

1989-01-01T23:59:59.000Z

248

Table 1. Personal Computers and Computer Terminals in Commercial Buildings,  

U.S. Energy Information Administration (EIA) Indexed Site

1 PC's and Computer Terminals 1 PC's and Computer Terminals Table 1. Personal Computers and Computer Terminals in Commercial Buildings, 1995 Buildings (thousand) Floorspace (million sq.ft.) Employees (thousand) PCs and Terminals (thousand) PCs and Terminals per Million Sq.Ft. PCs and Terminals per Thousand Employees All Buildings 4,579 58,772 75,262 43,003 732 571 Principal Building Activity Assembly 596 6,740 6,840 1,763 262 258 Education 309 7,740 9,495 8,046 1,039 847 Food Sales 137 642 652 206 321 316 Food Service 285 1,353 2,342 276 204 118 Health Care 105 2,333 4,483 2,549 1,092 569 Lodging 158 3,618 2,748 1,296 358 472 Mercantile and Service 1,289 12,728 13,049 4,021 316 308 Office 705 10,478 26,564 21,173 2,021 797

249

Proceedings of Heat Transfer 2003: ASME Summer Heat Transfer Conference  

E-Print Network [OSTI]

Proceedings of Heat Transfer 2003: ASME Summer Heat Transfer Conference Las Vegas, Nevada, USA July 21-23, 2003 HT2003-47449 HEAT TRANSFER FROM A MOVING AND EVAPORATING MENISCUS ON A HEATED SURFACE meniscus with complete evaporation of water without any meniscus break-up. The experimental heat transfer

Kandlikar, Satish

250

Time-Domain Absorbing Boundary Terminations for Waveguide Ports Based on State-Space Models  

E-Print Network [OSTI]

Absorbing boundary conditions for waveguide ports in time domain are important elements of transient approaches to treat RF structures. A successful way to implement these termination conditions is the decomposition of the transient fields in the absorbing plane in terms of modal field patterns. The absorbing condition is then accomplished by transferring the wave impedances (or admittances) of the modes to time domain, which leads to convolution operations involving Bessel functions and integrals of Bessel functions. This paper presents a new alternative approach: the convolution operations are approximated by appropriate state-space models whose system responses can be conveniently computed by standard integration schemes. These schemes are indispensable for transient simulations anyhow. Sufficiently far away from the cutoff frequency, a wideband match is achieved.

Flisgen, T; van Rienen, U

2014-01-01T23:59:59.000Z

251

2014-03-06 Issuance: Test Procedures for Packaged Terminal Air...  

Broader source: Energy.gov (indexed) [DOE]

3-06 Issuance: Test Procedures for Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps; Notice of Proposed Rulemaking 2014-03-06 Issuance: Test Procedures for...

252

Stress tensor and bulk viscosity in relativistic nuclear collisions  

E-Print Network [OSTI]

We discuss the influence of different initial conditions for the stress tensor and the effect of bulk viscosity on the expansion and cooling of the fireball created in relativistic heavy ion collisions. In particular, we explore the evolution...however, it does not significantly increase the entropy produced....

Fries, Rainer J.; Mueller, Berndt; Schaefer, Andreas.

2008-01-01T23:59:59.000Z

253

Development of Bulk Nanocrystalline Cemented Tungsten Carbide for Industrial Applicaitons  

SciTech Connect (OSTI)

This report contains detailed information of the research program entitled "Development of Bulk Nanocrystalline Cemented Tungsten Carbide Materials for Industrial Applications". The report include the processes that were developed for producing nanosized WC/Co composite powders, and an ultrahigh pressure rapid hot consolidation process for sintering of nanosized powders. The mechanical properties of consolidated materials using the nanosized powders are also reported.

Z. Zak Fang, H. Y. Sohn

2009-03-10T23:59:59.000Z

254

Bulk Metallic Glass Nanowire Architecture for Electrochemical Applications  

Science Journals Connector (OSTI)

bulk metallic glasses; nanowires; electrocatalysts; fuel cells; PEMFC; DAFC ... (8) Thus, there has been considerable interest in the development of nanowire fuel cell catalysts. ... To develop such catalysts, several characteristics have to be taken into consideration for their synthesis and assembly. ...

Marcelo Carmo; Ryan C. Sekol; Shiyan Ding; Golden Kumar; Jan Schroers; André D. Taylor

2011-03-03T23:59:59.000Z

255

Rod Bundle Heat Transfer: Steady-State Steam Cooling Experiments  

SciTech Connect (OSTI)

Through the joint efforts of the Pennsylvania State University and the United States Nuclear Regulatory Commission, an experimental rod bundle heat transfer (RBHT) facility was designed and built. The rod bundle consists of a 7 x 7 square pitch array with spacer grids and geometry similar to that found in a modern pressurized water reactor. From this facility, a series of steady-state steam cooling experiments were performed. The bundle inlet Reynolds number was varied from 1 400 to 30 000 over a pressure range from 1.36 to 4 bars (20 to 60 psia). The bundle inlet steam temperature was controlled to be at saturation for the specified pressure and the fluid exit temperature exceeded 550 deg. C in the highest power tests. One important quantity of interest is the local convective heat transfer coefficient defined in terms of the local bulk mean temperature of the flow, local wall temperature, and heat flux. Steam temperatures were measured at the center of selected subchannels along the length of the bundle by traversing miniaturized thermocouples. Using an analogy between momentum and energy transport, a method was developed for relating the local subchannel centerline temperature measurement to the local bulk mean temperature. Wall temperatures were measured using internal thermocouples strategically placed along the length of each rod and the local wall heat flux was obtained from an inverse conduction program. The local heat transfer coefficient was calculated from the data at each rod thermocouple location. The local heat transfer coefficients calculated for locations where the flow was fully developed were compared against several published correlations. The Weisman and El-Genk correlations were found to agree best with the RBHT steam cooling data, especially over the range of turbulent Reynolds numbers. The effect of spacer grids on the heat transfer enhancement was also determined from instrumentation placed downstream of the spacer grid locations. The local heat transfer was found to be greatest at locations immediately downstream of the grid, and as the flow moved further downstream from the grid it became more developed, thus causing the heat transfer to diminish. The amount of heat transfer enhancement was found to depend not only on the spacer grid design, but also on the local Reynolds number. It was seen that decreasing Reynolds number leads to greater heat transfer enhancement. (authors)

Spring, J.P.; McLaughlin, D.M. [The Pennsylvania State University, 201 Shields Building University Park, PA 16802 (United States)

2006-07-01T23:59:59.000Z

256

POSITION DESCRIPTION 2012 TRANSFER MENTOR  

E-Print Network [OSTI]

interest in the Transfer Mentor position with Orientation and Transition Programs' (OTP) Transfer Mentoring Program. The Transfer Mentor (TM) is a member of the Orientation and Transition Programs' staff to CSU including (but not limited to) helping transfer students explore study skills, time management

257

Technology transfer @ VUB Hugo Loosvelt  

E-Print Network [OSTI]

13/12/2012 Technology transfer @ VUB Hugo Loosvelt #12;VUB in Brussels www.vub.ac.be including or conclude licensing contracts #12;Technology transfer TTI assists academics to realise knowledge transfer by needed for R&D collaboration, licensing and spin-out company formation Technology transfer is the process

Steels, Luc

258

NREL: Technology Transfer - Webmaster  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Webmaster Webmaster To report any problems on or ask a question about the NREL Technology Transfer Web site, you may contact the Webmaster using the online form below. If you have a question or concern that's not related to this Web site, please see our list of contacts for assistance. To contact the Webmaster, please provide your name, e-mail address, and message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Licensing Agreements Nondisclosure Agreements Research Facilities Commercialization Programs Success Stories News

259

NREL: Technology Transfer - Ombuds  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Transfer Ombuds Technology Transfer Ombuds NREL's Technology Transfer Ombuds offers an informal process to help resolve issues and concerns regarding the laboratory's technology partnership, patent, and licensing activities. As a designated neutral party, our ombuds provides confidential, resolution-focused services. Through the ombuds process, we encourage collaborative techniques such as mediation to facilitate the speedy and low-cost resolution of complaints and disputes, when appropriate. The NREL Ombuds does not: Handle contract negotiation or other legal issues Act as a decision maker or draw conclusions Investigate or make formal recommendations on findings of fact. The ombuds also does not replace, override, or influence formal review or appeal mechanisms, or serve as an intermediary when legal action is

260

Partnerships and Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cooperative Research and Development Agreement Cooperative Research and Development Agreement visualization scientist A Cooperative Research and Development Agreement (CRADA) is a mechanism whereby non-federal entities (industry, universities, non-profits, etc.) can collaborate with federal laboratories on research and development projects. CRADAs are specifically technology transfer agreements; technologies developed under CRADAs are expected to be transferred to the private sector for commercial exploitation, either by the non-federal partner or another licensee of such technologies. CRADAs were authorized by the Stevenson-Wydler Technology Innovation Act of 1980 (Public Law 96-480); the authority for government-owned, contractor-operated laboratories such as ORNL to enter into CRADAs was granted by the National Competitiveness Technology Transfer Act of 1989

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Heat transfer to a horizontal cylinder in a shallow bubble column  

Science Journals Connector (OSTI)

Abstract Heat transfer coefficient correlations for tall bubble columns are unable to predict heat transfer in shallow bubble columns, which have unique geometry and fluid dynamics. In this work, the heat transfer coefficient is measured on the surface of a horizontal cylinder immersed in a shallow air–water bubble column. Superficial velocity, liquid depth, and cylinder height and horizontal position with respect to the sparger orifices are varied. The heat transfer coefficient is found to increase with height until reaching a critical height, and a dimensionless, semi-theoretical correlation is developed that incorporates superficial velocity, liquid properties, and height. Additionally, the more minor effects of flow regime, column region, and bubble impact are discussed. Notably, the heat transfer coefficient can be as high in the region of bubble coalescence as in the bulk of the column, but only if bubbles impact the cylinder. The correlation and discussion provide a framework for modeling and designing shallow, coil-cooled bubble columns.

Emily W. Tow; John H. Lienhard V

2014-01-01T23:59:59.000Z

262

Technology Transfer: Available Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software and Information Technologies Software and Information Technologies Algorithm for Correcting Detector Nonlinearites Chatelet: More Accurate Modeling for Oil, Gas or Geothermal Well Production Collective Memory Transfers for Multi-Core Processors Energy Efficiency Software EnergyPlus:Energy Simulation Software for Buildings Tools, Guides and Software to Support the Design and Operation of Energy Efficient Buildings Flexible Bandwidth Reservations for Data Transfer Genomic and Proteomic Software LABELIT - Software for Macromolecular Diffraction Data Processing PHENIX - Software for Computational Crystallography Vista/AVID: Visualization and Allignment Software for Comparative Genomics Geophysical Software Accurate Identification, Imaging, and Monitoring of Fluid Saturated Underground Reservoirs

263

Recombination in polymer-fullerene bulk heterojunction solar cells  

Science Journals Connector (OSTI)

Recombination of photogenerated charge carriers in polymer bulk heterojunction (BHJ) solar cells reduces the short circuit current (Jsc) and the fill factor (FF). Identifying the mechanism of recombination is, therefore, fundamentally important for increasing the power conversion efficiency. Light intensity and temperature-dependent current-voltage measurements on polymer BHJ cells made from a variety of different semiconducting polymers and fullerenes show that the recombination kinetics are voltage dependent and evolve from first-order recombination at short circuit to bimolecular recombination at open circuit as a result of increasing the voltage-dependent charge carrier density in the cell. The “missing 0.3 V” inferred from comparison of the band gaps of the bulk heterojunction materials and the measured open-circuit voltage at room-temperature results from the temperature dependence of the quasi-Fermi levels in the polymer and fullerene domains—a conclusion based on the fundamental statistics of fermions.

Sarah R. Cowan; Anshuman Roy; Alan J. Heeger

2010-12-16T23:59:59.000Z

264

Differentiating surface and bulk interactions in nanoplasmonic interferometric sensor arrays  

E-Print Network [OSTI]

Detecting specific target analytes and differentiating them from interfering background effects is a crucial but challenging task in complex multi-component solutions commonly encountered in environmental, chemical, biological, and medical sensing applications. Here we present a simple nanoplasmonic interferometric sensor platform that can differentiate the adsorption of a thin protein layer on the sensor surface (surface effects) from bulk refractive index changes (interfering background effects) at a single sensing spot, exploiting the different penetration depths of multiple propagating surface plasmon polaritons excited in the ring-hole nanostructures. A monolayer of bovine serum albumin (BSA) molecules with an effective thickness of 1.91nm is detected and differentiated from a 10-3 change in the bulk refractive index unit of the solution. The noise level of the retrieved real-time sensor output compares favorably with traditional prism-based surface plasmon resonance sensors, but is achieved using a sign...

Zeng, Beibei; Bartoli, Filbert J

2014-01-01T23:59:59.000Z

265

Method of fabricating an optoelectronic device having a bulk heterojunction  

DOE Patents [OSTI]

A method of fabricating an optoelectronic device comprises: depositing a first layer having protrusions over a first electrode, in which the first layer comprises a first organic small molecule material; depositing a second layer on the first layer such that the second layer is in physical contact with the first layer; in which the smallest lateral dimension of the protrusions are between 1 to 5 times the exciton diffusion length of the first organic small molecule material; and depositing a second electrode over the second layer to form the optoelectronic device. A method of fabricating an organic optoelectronic device having a bulk heterojunction is also provided and comprises: depositing a first layer with protrusions over an electrode by organic vapor phase deposition; depositing a second layer on the first layer where the interface of the first and second layers forms a bulk heterojunction; and depositing another electrode over the second layer.

Shtein, Max (Ann Arbor, MI); Yang, Fan (Princeton, NJ); Forrest, Stephen R. (Princeton, NJ)

2008-10-14T23:59:59.000Z

266

Function of transcription termination factor .rho. in a model transcription system using synthetic DNA as template  

Science Journals Connector (OSTI)

Function of transcription termination factor .rho. in a model transcription system using synthetic DNA as template ...

Katsuya Shigesada; Mutsuo Imai

1982-11-01T23:59:59.000Z

267

SRNL - Technology Transfer - Ombudsman  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ombudsman Ombudsman Ombudsman Program Policy The Department of Energy and its management and operating contractors (M & O Contractors) engaging in technology partnership activities, share a mutual objective to ensure complete fairness in the transfer of federally funded technologies into the marketplace for the benefit of the U.S. economy. This includes an interest in open lines of communication and the early identification of issues, complaints and disputes between contractors and their existing or potential partners. The Technology Transfer Ombudsman Program provides an independent point of contact for concerns about technology transfer i SRS Sign ssues, complaints and disputes. The mission of the Ombudsman Program is to elevate to the appropriate SRNS officials the information needed to identify and resolve problems thereby improving satisfaction with SRNS practices and reducing the occasion for formal disputes and litigation. The Ombudsman will not be involved in the merits of cases that are the subject of ongoing dispute resolution or litigation, or investigation incidents thereto. The Ombudsman is not established to be a super-administrator, re-doing what specialized officials have already done. Rather, the Ombudsman is to ensure that appropriate SRNS officials consider all pertinent information when deciding the company's position on a technology transfer complaint. To request forms or acquire additional information contact: Michael Wamstad, 803-725-3751 or mike.wamstad@srs.gov.

268

Technology Transfer Overview  

Broader source: Energy.gov [DOE]

DOE's capabilities, and the innovations it supports, help ensure the country's role as a leader in science and technology. In particular, technology transfer supports the maturation and deployment of DOE discoveries, providing ongoing economic, security and environmental benefits for all Americans.

269

Feed tank transfer requirements  

SciTech Connect (OSTI)

This document presents a definition of tank turnover; DOE responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements; records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor for use during Phase 1B.

Freeman-Pollard, J.R.

1998-09-16T23:59:59.000Z

270

Surface stabilization of organics on hematite by conversion from terminal to bridging adsorption structures  

SciTech Connect (OSTI)

The chemistry of methanol on the R-cut surface of hematite was studied in ultrahigh vacuum (UHV) using temperature programmed desorption (TPD), and electron energy loss spectroscopy in both the electronic (EELS) and vibrational ('high resolution' - HREELS) regimes. The R-cut hematite surface, also referred to as the alpha-Fe2O3(012) surface has two stable surface structure in UHV. The (1x1) surface is obtained after oxidation with O2 at 750K, and has a bulk terminated structure possessing undercoordinated Fe3+ and O2- surface sites. The phonon and electronic spectra of this surface are consistent with those of hematite. In contrast, the (2x1) reconstructed surface, obtained by annealing the (1x1) surface at 950 K, possesses Fe2+ surface sites based on the electronic spectrum, but is essential hematite in structure based on the phonon spectrum. Although the atomic arrangements of the (2x1) surface are not known, the reconstruction modifies every other row of cation and anion sites that run parallel to the surface along the[1 2 1] direction.

Henderson, Michael A. (BATTELLE (PACIFIC NW LAB))

2002-06-20T23:59:59.000Z

271

Coefficients of the second viscosity in bulk liquid helium  

Science Journals Connector (OSTI)

The coefficients of the second viscosity in bulk liquid helium are evaluated explicitly as a function of temperature via interactions between the anomalous excitation spectrums. The four coefficients of the second viscosity exhibit a T-1 dependence at low temperatures (well below 0.6 K), which is due to three-phonon processes originating from the anomalous dispersion at very low momenta and temperatures.

Chung-In Um; Chul-Won Jun; Thomas F. George

1992-09-01T23:59:59.000Z

272

A valiant little terminal: A VLT user's manual  

SciTech Connect (OSTI)

VLT came to be used at SLAC (Stanford Linear Accelerator Center), because SLAC wanted to assess the Amiga's usefulness as a color graphics terminal and T{sub E}X workstation. Before the project could really begin, the people at SLAC needed a terminal emulator which could successfully talk to the IBM 3081 (now the IBM ES9000-580) and all the VAXes on the site. Moreover, it had to compete in quality with the Ann Arbor Ambassador GXL terminals which were already in use at the laboratory. Unfortunately, at the time there was no commercial program which fit the bill. Luckily, Willy Langeveld had been independently hacking up a public domain VT100 emulator written by Dave Wecker et al. and the result, VLT, suited SLAC's purpose. Over the years, as the program was debugged and rewritten, the original code disappeared, so that now, in the present version of VLT, none of the original VT100 code remains.

Weinstein, A.

1992-08-01T23:59:59.000Z

273

Probing the nuclear energy functional at band termination  

Science Journals Connector (OSTI)

A systematic study of terminating states in the A~50 mass region using the self-consistent Skyrme-Hartree-Fock model is presented. The objective of this study is to demonstrate that the terminating states, due to their intrinsic simplicity, offer unique and so far unexplored opportunities to study different aspects of the effective NN interaction or nuclear local energy density functional. In particular, we show that the agreement of the calculations to the data depends on the spin fields and the spin-orbit term which, in turn, allows us to constrain the appropriate Landau parameters and the strength of the spin-orbit potential. The present study reveals that the structure and energy of terminating states can be used as a tool to differentiate among the many Skyrme force parametrizations.

Honorata Zdu?czuk; Wojciech Satu?a; Ramon A. Wyss

2005-02-09T23:59:59.000Z

274

New San Antonio Airport Terminal Generating Clean Power | Department of  

Broader source: Energy.gov (indexed) [DOE]

San Antonio Airport Terminal Generating Clean Power San Antonio Airport Terminal Generating Clean Power New San Antonio Airport Terminal Generating Clean Power January 27, 2011 - 2:03pm Addthis The new photovoltaic system at the San Antonio International Airport. The new photovoltaic system at the San Antonio International Airport. Todd G. Allen Project Officer, Golden Field Office What are the key facts? The City of San Antonio's EECBG proram staff awarded a block grant for a solar photovoltaic (PV) system at the airport, designed and built the project, and complied with all local and federal regulations... all in seven months. In early 2010, the City of San Antonio's Energy Efficiency and Conservation Block Grant (EECBG) program staff quickly realized a golden opportunity lay right at their fingertips. The opening of the new San

275

Standard practice for bulk sampling of liquid uranium hexafluoride  

E-Print Network [OSTI]

1.1 This practice covers methods for withdrawing representative samples of liquid uranium hexafluoride (UF6) from bulk quantities of the material. Such samples are used for determining compliance with the applicable commercial specification, for example Specification C787 and Specification C996. 1.2 It is assumed that the bulk liquid UF6 being sampled comprises a single quality and quantity of material. This practice does not address any special additional arrangements that might be required for taking proportional or composite samples, or when the sampled bulk material is being added to UF6 residues already in a container (“heels recycle”). 1.3 The number of samples to be taken, their nominal sample weight, and their disposition shall be agreed upon between the parties. 1.4 The scope of this practice does not include provisions for preventing criticality incidents. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of th...

American Society for Testing and Materials. Philadelphia

2001-01-01T23:59:59.000Z

276

Role of chemical termination in edge contact to graphene  

SciTech Connect (OSTI)

Edge contacts to graphene can offer excellent contact properties. Role of different chemical terminations is examined by using ab initio density functional theory and quantum transport simulations. It is found that edge termination by group VI elements O and S offers considerably lower contact resistance compared to H and group VII element F. The results can be understood by significantly larger binding energy and shorter binding distance between the metal contact and these group VI elements, which results in considerably lower interface potential barrier and larger transmission. The qualitative conclusion applies to a variety of contact metal materials.

Gao, Qun; Guo, Jing, E-mail: guoj@ufl.edu [Department of Electrical and Computer Engineering, University of Florida, Gainesville, Florida 32611 (United States)

2014-05-01T23:59:59.000Z

277

Base drive circuit for a four-terminal power Darlington  

DOE Patents [OSTI]

A high power switching circuit which utilizes a four-terminal Darlington transistor block to improve switching speed, particularly in rapid turn-off. Two independent reverse drive currents are utilized during turn off in order to expel the minority carriers of the Darlington pair at their own charge sweep-out rate. The reverse drive current may be provided by a current transformer, the secondary of which is tapped to the base terminal of the power stage of the Darlington block. In one application, the switching circuit is used in each power switching element in a chopper-inverter drive of an electric vehicle propulsion system.

Lee, Fred C. (Blacksburg, VA); Carter, Roy A. (Salem, VA)

1983-01-01T23:59:59.000Z

278

Static power reduction for midpoint-terminated busses  

DOE Patents [OSTI]

A memory system is disclosed which is comprised of a memory controller and addressable memory devices such as DRAMs. The invention provides a programmable register to control the high vs. low drive state of each bit of a memory system address and control bus during periods of bus inactivity. In this way, termination voltage supply current can be minimized, while permitting selected bus bits to be driven to a required state. This minimizes termination power dissipation while not affecting memory system performance. The technique can be extended to work for other high-speed busses as well.

Coteus, Paul W. (Yorktown Heights, NY); Takken, Todd (Brewster, NY)

2011-01-18T23:59:59.000Z

279

FACILITY SURVEY & TRANSFER Facility Survey & Transfer Overview  

Broader source: Energy.gov (indexed) [DOE]

SURVEY & TRANSFER SURVEY & TRANSFER Facility Survey & Transfer Overview Transfer Activities Checklist Pre-Survey Information Request Survey Report Content Detailed Walkdown Checklist Walkdown Checklist Clipboard Aids S & M Checklist Survey Report Example - Hot Storage Garden Survey Report Example - Tritium System Test Assembly Survey Report Example - Calutron Overview As DOE facilities become excess, many that are radioactively and/or chemically contaminated will become candidate for transfer to DOE-EM for deactivation and decommissioning. Requirements and guidance for such transfers are contained in:  DOE Order 430.1B Chg. 2, REAL PROPERTY & ASSET MANAGEMENT  DOE Guide 430.1-5, TRANSITION IMPLEMENTATION GUIDE The transfer process is illustrated in the Transfer Process figure. The purpose here is to provide examples of methods and

280

Urban Sewage Delivery Heat Transfer System (2): Heat Transfer  

E-Print Network [OSTI]

The thimble delivery heat-transfer (TDHT) system is one of the primary modes to utilize the energy of urban sewage. Using the efficiency-number of transfer units method ( ), the heat-transfer efficiencies of the parallel-flow and reverse-flow TDTH...

Zhang, C.; Wu, R.; Li, X.; Li, G.; Zhuang, Z.; Sun, D.

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

File:08COaBulkTransmissionSitingProcess.pdf | Open Energy Information  

Open Energy Info (EERE)

COaBulkTransmissionSitingProcess.pdf Jump to: navigation, search File File history File usage Metadata File:08COaBulkTransmissionSitingProcess.pdf Size of this preview: 463 599...

282

Notes 10. A thermohydrodynamic bulk-flow model for fluid film bearings  

E-Print Network [OSTI]

The complete set of bulk-flow equations for the analysis of turbulent flow fluid film bearings. Importance of thermal effects in process fluid applications. A CFD method for solution of the bulk-flow equations....

San Andres, Luis

2009-01-01T23:59:59.000Z

283

Efficient Organic Solar Cells Based on a Stacked Bulk Heterojunction Structure  

Science Journals Connector (OSTI)

Bulk generated charge carriers need to percolate within the bulk blend toward their specific electrodes. That may lead to reduced charge carrier mobility by the intermixing of two compounds which again limits the...

Zhang Xinfang; Xu Zheng; Chen Yuening…

2009-01-01T23:59:59.000Z

284

Heat Transfer and Convection Currents  

Science Journals Connector (OSTI)

...October 1965 research-article Heat Transfer and Convection Currents D. C...convection in a medium with internal heat generation is discussed semi-quantitatively...States English United Kingdom 1966 Heat transfer and convection currents Tozer D...

1965-01-01T23:59:59.000Z

285

Faculty Positions Heat Transfer and  

E-Print Network [OSTI]

Faculty Positions Heat Transfer and Thermal/Energy Sciences Naval Postgraduate School Monterey-track faculty position at the assistant professor level in the areas of Heat Transfer and Thermal/Fluid Sciences

286

Phase-Transfer-Catalyzed Reductions  

Science Journals Connector (OSTI)

Phase-transfer catalysis (PTC) procedures that have been developed for use with sodium borohydride, lithium aluminum hydride, and several other reducing agents involving anion transfer to organic media are des...

Charles M. Starks; Charles L. Liotta; Marc E. Halpern

1994-01-01T23:59:59.000Z

287

Technology Transfer Reports  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Research Projects Agency-Energy (ARPA-E) Advanced Research Projects Agency-Energy (ARPA-E) Oil & Gas Technology Transfer Initiatives USEFUL LINKS Association of University Technology Managers (AUTM) Federal Laboratory Consortium (FLC) FLC Technology Locator Feedback Contact us about Tech Transfer: Mary.McManmon@science.doe.gov Mary McManmon, 202-586-3509 link to Adobe PDF Reader link to Adobe Flash player Reports Navigate Home About Us Contact Information Hide Thumbs First Previous Pause Next Last Set Speed Slideshow speed: 5 seconds Move Autoinduction system New Image Set Autoinduction Autoinduction System The award winning Overnight Express(tm) Autoinduction System developed at BNL simplifies protein production in the widely used T7 gene expression system. Decontamination Foam-based decontamination

288

NREL: Technology Transfer - Events  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Events Events February 2014 NASEO Energy Outlook Conference February 4 - 7, 2014 Washington , DC Add to calendar Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Licensing Agreements Nondisclosure Agreements Research Facilities Commercialization Programs Success Stories News Contacts Did you find what you needed? Yes 1 No 0 Thank you for your feedback. Would you like to take a moment to tell us how we can improve this page? Submit We value your feedback. Thanks! We've received your feedback. Something went wrong. Please try again later. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. NREL U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Alliance for Sustainable Energy, LLC

289

Efficient Data Transfer Protocols  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Efficient Efficient Data Transfer Protocols for Big Data Brian Tierney ∗ , Ezra Kissel † , Martin Swany † , Eric Pouyoul ∗ ∗ Lawrence Berkeley National Laboratory, Berkeley, CA 94270 † School of Informatics and Computing, Indiana University, Bloomington, IN 47405 Abstract-Data set sizes are growing exponentially, so it is important to use data movement protocols that are the most efficient available. Most data movement tools today rely on TCP over sockets, which limits flows to around 20Gbps on today's hardware. RDMA over Converged Ethernet (RoCE) is a promising new technology for high-performance network data movement with minimal CPU impact over circuit-based infrastructures. We compare the performance of TCP, UDP, UDT, and RoCE over high latency 10Gbps and 40Gbps network paths, and show that RoCE-based data transfers can fill a 40Gbps path using much less CPU than other protocols.

290

Technology Transfer: Site Map  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Site Map Site Map About Us About Technology Transfer Contact Us Available Technologies Advanced Materials Biofuels Biotechnology and Medicine Developing World Energy Environmental Technologies Imaging and Lasers Ion Sources and Beam Technologies Nanotechnology and Microtechnology Software and Information Technology For Industry Licensing Overview Frequently Asked Questions Partnering with Berkeley Lab Licensing Interest Form Receive New Tech Alerts For Researchers What You Need to Know and Do The Tech Transfer Process Forms Record of Invention (Word doc -- please do not use earlier PDF version of the form) Software Disclosure and Abstract (PDF, use Adobe Acrobat or Adobe Reader 9 and up ONLY to complete the form) Policies Conflict of Interest Outside Empolyment Export Control FAQs for Researchers

291

Feed tank transfer requirements  

SciTech Connect (OSTI)

This document presents a definition of tank turnover. Also, DOE and PC responsibilities; TWRS DST permitting requirements; TWRS Authorization Basis (AB) requirements; TWRS AP Tank Farm operational requirements; unreviewed safety question (USQ) requirements are presented for two cases (i.e., tank modifications occurring before tank turnover and tank modification occurring after tank turnover). Finally, records and reporting requirements, and documentation which will require revision in support of transferring a DST in AP Tank Farm to a privatization contractor are presented.

Freeman-Pollard, J.R.

1998-09-16T23:59:59.000Z

292

Measuring Information Transfer  

Science Journals Connector (OSTI)

An information theoretic measure is derived that quantifies the statistical coherence between systems evolving in time. The standard time delayed mutual information fails to distinguish information that is actually exchanged from shared information due to common history and input signals. In our new approach, these influences are excluded by appropriate conditioning of transition probabilities. The resulting transfer entropy is able to distinguish effectively driving and responding elements and to detect asymmetry in the interaction of subsystems.

Thomas Schreiber

2000-07-10T23:59:59.000Z

293

LM137/LM337 3-Terminal Adjustable Negative Regulators  

E-Print Network [OSTI]

LM137/LM337 3-Terminal Adjustable Negative Regulators General Description The LM137/LM337 design has been opti- mized for excellent regulation and low thermal transients. Further, the LM137 virtually blowout-proof against overloads. The LM137/LM337 serve a wide variety of applications in- cluding

Ravikumar, B.

294

LM137/LM337 3-Terminal Adjustable Negative Regulators  

E-Print Network [OSTI]

LM137/LM337 3-Terminal Adjustable Negative Regulators General Description The LM137/LM337. The circuit design has been opti- mized for excellent regulation and low thermal transients. Further, the LM them virtually blowout-proof against overloads. The LM137/LM337 serve a wide variety of applications in

Berns, Hans-Gerd

295

Truck scheduling at zero-inventory cross docking terminals  

Science Journals Connector (OSTI)

Handling freight at cross docking terminals constitutes a complex planning task which comprises several executive steps as shipments delivered by inbound trucks are to be unloaded, sorted according to their designated destinations, moved across the dock ... Keywords: Cross docking, Dynamic programming, Food industry, Logistics, Truck scheduling

Nils Boysen

2010-01-01T23:59:59.000Z

296

Robust door assignment in less-than-truckload terminals  

Science Journals Connector (OSTI)

The assignment of incoming trailers to strip doors is one of the critical decisions that affect the performance of cross docking operations in less-than-truckload terminals. This paper introduces a mixed integer quadratic model with the objective of ... Keywords: Cross docking, Door assignment, Less-than-truckload, Transportation, Uncertainty

Korhan Acar; Ali Yalcin; Daniel Yankov

2012-12-01T23:59:59.000Z

297

Highly Z-Selective Metathesis Homocoupling of Terminal Olefins  

E-Print Network [OSTI]

Mo and W MonoAryloxide-Pyrrolide (MAP) olefin metathesis catalysts can couple terminal olefins to give as high as >98% Z-products in moderate to high yields with as little as 0.2% catalyst. Results are reported for 1-hexene, ...

Jiang, Annie J.

298

Three-terminal semiconductor laser for wave mixing  

E-Print Network [OSTI]

-terminal design has been recently pro- posed to obtain a dual-wavelength operation of an InxGa12xN light emitting diode ~LED! @6#. In that work, a strongly doped p11/n11 tunnel junction layer was intro- duced between two MQW segments that were emitting at two...

Belyanin, Alexey; Kocharovsky, V.; Kocharovsky, V.; Scully, Marlan O.

2002-01-01T23:59:59.000Z

299

Department of Mechanical Engineering Spring 2012 Synthetic Cable Termination  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical Engineering Spring 2012 Synthetic Cable Termination Overview NAVAIR is attempting to replace their existing metallic purchase cable with a new, synthetic cable. The synthetic cable is currently not able to be tensile tested because there is no way for the ends

Demirel, Melik C.

300

Bulk viscosity of superfluid hyperon stars Mikhail E. Gusakov and Elena M. Kantor  

E-Print Network [OSTI]

Bulk viscosity of superfluid hyperon stars Mikhail E. Gusakov and Elena M. Kantor Ioffe Physical; published 14 October 2008) We calculate the bulk viscosity due to nonequilibrium weak processes bulk viscosity coefficients, with only three of them being independent. In addition, we correct

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Corrosion of, and cellular responses to MgZnCa bulk metallic glasses Xuenan Gu a  

E-Print Network [OSTI]

Corrosion of, and cellular responses to Mg­Zn­Ca bulk metallic glasses Xuenan Gu a , Yufeng Zheng a: Magnesium alloy Bulk metallic glass Mechanical property Corrosion Cytotoxicity a b s t r a c t Mg­Zn­Ca bulk, mechanical testing, corrosion and cytotoxicity tests. It was found that the Mg66Zn30Ca4 sample presents

Zheng, Yufeng

302

Identification of Avalanche Precursors by Acoustic Probing in the Bulk of Tilted Granular Layers  

E-Print Network [OSTI]

Identification of Avalanche Precursors by Acoustic Probing in the Bulk of Tilted Granular Layers M simultaneously caracterize precursors on the free surface with an optical method and in the bulk with acoustic to probe rearrangements in the bulk of the granular material. A linear method can also be used provided

Paris-Sud XI, Université de

303

5. Heat transfer Ron Zevenhoven  

E-Print Network [OSTI]

1/120 5. Heat transfer Ron Zevenhoven �bo Akademi University Thermal and Flow Engineering / Värme Three heat transfer mechanisms Conduction Convection Radiation 2/120 Pic: B�88 �bo Akademi University | Thermal and Flow Engineering | 20500 Turku | Finland #12;3/120 5.1 Conductive heat transfer �bo Akademi

Zevenhoven, Ron

304

Heat and moisture transfer through clothing  

E-Print Network [OSTI]

R. C. Eberhart (ed), Heat transfer in medicine and biology.Convective and radiative heat transfer coefficients forsimulation of heat and moisture transfer in a human-

Voelker, Conrad; Hoffmann, Sabine; Kornadt, Oliver; Arens, Edward; Zhang, Hui; Huizenga, Charlie

2009-01-01T23:59:59.000Z

305

Columbia River: Terminal fisheries research project. 1994 Annual report  

SciTech Connect (OSTI)

Columbia River terminal fisheries have been conducted in Youngs Bay, Oregon, since the early 1960`s targeting coho salmon produced at the state facility on the North Fork Klaskanine River. In 1977 the Clatsop County Economic Development Council`s (CEDC) Fisheries Project began augmenting the Oregon Department of Fish and Wildlife production efforts. Together ODFW and CEDC smolt releases totaled 5,060,000 coho and 411,300 spring chinook in 1993 with most of the releases from the net pen acclimation program. During 1980-82 fall commercial terminal fisheries were conducted adjacent to the mouth of Big Creek in Oregon. All past terminal fisheries were successful in harvesting surplus hatchery fish with minimal impact on nonlocal weak stocks. In 1993 the Northwest Power Planning Council recommended in its` Strategy for Salmon that terminal fishing sites be identified and developed. The Council called on the Bonneville Power Administration to fund a 10-year study to investigate the feasibility of creating and expanding terminal known stock fisheries in the Columbia River Basin. The findings of the initial year of the study are included in this report. The geographic area considered for study extends from Bonneville Dam to the river mouth. The initial year`s work is the beginning of a 2-year research stage to investigate potential sites, salmon stocks, and methodologies; a second 3-year stage will focus on expansion in Youngs Bay and experimental releases into sites with greatest potential; and a final 5-year phase establishing programs at full capacity at all acceptable sites. After ranking all possible sites using five harvest and five rearing criteria, four sites in Oregon (Tongue Point, Blind Slough, Clifton Channel and Wallace Slough) and three in Washington (Deep River, Steamboat Slough and Cathlamet Channel) were chosen for study.

Hirose, P.; Miller, M.; Hill, J.

1996-12-01T23:59:59.000Z

306

Bulk Viscosity of a Gas of Massless Pions  

E-Print Network [OSTI]

In the hadronic phase, the dominant configuration of QCD with two flavors of massless quarks is a gas of massless pions. We calculate the bulk viscosity (zeta) using the Boltzmann equation with the kinetic theory generalized to incorporate the trace anomaly. We find that the dimensionless ratio zeta/s, s being the entropy density, is monotonic increasing below T=120 MeV, where chiral perturbation theory is applicable. This, combined with previous results, shows that zeta/s reaches its maximum near the phase transition temperature Tc, while eta/s, eta being the shear viscosity, reaches its minimum near Tc in QCD with massless quarks.

Jiunn-Wei Chen; Juven Wang

2007-11-30T23:59:59.000Z

307

Bulk Handling of Milk on Texas Dairy Farms.  

E-Print Network [OSTI]

areas dur- tem of handling milk. ing the spring and summer of 1957 on dairy - farms which have converted their operations to Dairymen interviewed in North Texas had tanks ranging from 150 gallons to 1,000 gallons, , the bulk system of producing... and handling milk. while tanks in the Corous Christi area raneDd Texas dairy farmers are operating larger from 200 gallons to 1,000 gallons. The average units, milking more cows, selling more milk and tank in North Texas had a capacity of 400 gal. generally...

Parker, Cecil A.; Stelly, Randall, Moore, Donald S.

1958-01-01T23:59:59.000Z

308

Multifunctional bulk plasma source based on discharge with electron injection  

SciTech Connect (OSTI)

A bulk plasma source, based on a high-current dc glow discharge with electron injection, is described. Electron injection and some special design features of the plasma arc emitter provide a plasma source with very long periods between maintenance down-times and a long overall lifetime. The source uses a sectioned sputter-electrode array with six individual sputter targets, each of which can be independently biased. This discharge assembly configuration provides multifunctional operation, including plasma generation from different gases (argon, nitrogen, oxygen, acetylene) and deposition of composite metal nitride and oxide coatings.

Klimov, A. S.; Medovnik, A. V. [Tomsk State University of Control Systems and Radioelectronics, Tomsk 634050 (Russian Federation); Tyunkov, A. V. [Tomsk State University of Control Systems and Radioelectronics, Tomsk 634050 (Russian Federation); Institute of High Current Electronics, Tomsk 634055 (Russian Federation); Savkin, K. P.; Shandrikov, M. V.; Vizir, A. V. [Institute of High Current Electronics, Tomsk 634055 (Russian Federation)

2013-01-15T23:59:59.000Z

309

Radiative cooling of bulk silicon by incoherent light pump  

SciTech Connect (OSTI)

In contrast to radiative cooling by light up conversion caused exclusively by a low-entropy laser pump and employing thermally assisted fluorescence/luminescence as a power out, we demonstrate light down conversion cooling by incoherent pumps, 0.47–0.94??m light emitting diodes, and employing thermal emission (TE) as a power out. We demonstrate ?3.5?K bulk cooling of Si at 450?K because overall energy of multiple below bandgap TE photons exceeds the energy of a single above bandgap pump photon. We show that using large entropy TE as power out helps avoid careful tuning of an incoherent pump wavelength and cool indirect-bandgap semiconductors.

Malyutenko, V. K., E-mail: malyut@isp.kiev.ua; Bogatyrenko, V. V.; Malyutenko, O. Yu. [V. E. Lashkaryov Institute of Semiconductor Physics, 03028 Kiev (Ukraine)] [V. E. Lashkaryov Institute of Semiconductor Physics, 03028 Kiev (Ukraine)

2013-12-23T23:59:59.000Z

310

Geoelectrical Measurement of Multi-Scale Mass Transfer Parameters  

SciTech Connect (OSTI)

Mass transfer affects contaminant transport and is thought to control the efficiency of aquifer remediation at a number of sites within the Department of Energy (DOE) complex. An improved understanding of mass transfer is critical to meeting the enormous scientific and engineering challenges currently facing DOE. Informed design of site remedies and long-term stewardship of radionuclide-contaminated sites will require new cost-effective laboratory and field techniques to measure the parameters controlling mass transfer spatially and across a range of scales. In this project, we sought to capitalize on the geophysical signatures of mass transfer. Previous numerical modeling and pilot-scale field experiments suggested that mass transfer produces a geoelectrical signature—a hysteretic relation between sampled (mobile-domain) fluid conductivity and bulk (mobile + immobile) conductivity—over a range of scales relevant to aquifer remediation. In this work, we investigated the geoelectrical signature of mass transfer during tracer transport in a series of controlled experiments to determine the operation of controlling parameters, and also investigated the use of complex-resistivity (CR) as a means of quantifying mass transfer parameters in situ without tracer experiments. In an add-on component to our grant, we additionally considered nuclear magnetic resonance (NMR) to help parse mobile from immobile porosities. Including the NMR component, our revised study objectives were to: 1. Develop and demonstrate geophysical approaches to measure mass-transfer parameters spatially and over a range of scales, including the combination of electrical resistivity monitoring, tracer tests, complex resistivity, nuclear magnetic resonance, and materials characterization; and 2. Provide mass-transfer estimates for improved understanding of contaminant fate and transport at DOE sites, such as uranium transport at the Hanford 300 Area. To achieve our objectives, we implemented a 3-part research plan involving (1) development of computer codes and techniques to estimate mass-transfer parameters from time-lapse electrical data; (2) bench-scale experiments on synthetic materials and materials from cores from the Hanford 300 Area; and (3) field demonstration experiments at the DOE’s Hanford 300 Area. In a synergistic add-on to our workplan, we analyzed data from field experiments performed at the DOE Naturita Site under a separate DOE SBR grant, on which PI Day-Lewis served as co-PI. Techniques developed for application to Hanford datasets also were applied to data from Naturita. 1. Introduction The Department of Energy (DOE) faces enormous scientific and engineering challenges associated with the remediation of legacy contamination at former nuclear weapons production facilities. Selection, design and optimization of appropriate site remedies (e.g., pump-and-treat, biostimulation, or monitored natural attenuation) requires reliable predictive models of radionuclide fate and transport; however, our current modeling capabilities are limited by an incomplete understanding of multi-scale mass transfer—its rates, scales, and the heterogeneity of controlling parameters. At many DOE sites, long “tailing” behavior, concentration rebound, and slower-than-expected cleanup are observed; these observations are all consistent with multi-scale mass transfer [Haggerty and Gorelick, 1995; Haggerty et al., 2000; 2004], which renders pump-and-treat remediation and biotransformation inefficient and slow [Haggerty and Gorelick, 1994; Harvey et al., 1994; Wilson, 1997]. Despite the importance of mass transfer, there are significant uncertainties associated with controlling parameters, and the prevalence of mass transfer remains a point of debate [e.g., Hill et al., 2006; Molz et al., 2006] for lack of experimental methods to verify and measure it in situ or independently of tracer breakthrough. There is a critical need for new field-experimental techniques to measure mass transfer in-situ and estimate multi-scale and spatially variable mass-transfer parame

Day-Lewis, Frederick; Singha, Kamini; Haggerty, Roy; Johnson, Tim; Binley, Andrew; Lane, John

2014-01-16T23:59:59.000Z

311

Detailed balance theory of excitonic and bulk heterojunction solar cells  

Science Journals Connector (OSTI)

A generalized solar cell model for excitonic and classical bipolar solar cells describes the combined transport and interaction of electrons, holes, and excitons in accordance with the principle of detailed balance. Conventional inorganic solar cells, single-phase organic solar cells and bulk heterojunction solar cells, i.e., nanoscale mixtures of two organic materials, are special cases of this model. For high mobilities, the compatibility with the principle of detailed balance ensures that our model reproduces the Shockley-Queisser limit irrespective of how the energy transport is achieved. For less ideal devices distinct differences become visible between devices that are described by linear differential equations and those with nonlinear effects, such as a voltage-dependent collection in bipolar p-i-n-type devices. These differences in current-voltage characteristics are also decisive for the validity of the reciprocity theorem between photovoltaic quantum efficiency and electroluminescent emission. Finally, we discuss the effect of band offset at the heterointerface in a bulk heterojunction cell and the effect of the average distances between these heterointerfaces on the performance of a solar cell in order to show how our detailed balance model includes also these empirically important quantities.

Thomas Kirchartz; Julian Mattheis; Uwe Rau

2008-12-29T23:59:59.000Z

312

Method of fabricating an optoelectronic device having a bulk heterojunction  

DOE Patents [OSTI]

A method of fabricating an organic optoelectronic device having a bulk heterojunction comprises the steps of: depositing a first layer over a first electrode by organic vapor phase deposition, wherein the first layer comprises a first organic small molecule material; depositing a second layer on the first layer such that the second layer is in physical contact with the first layer, wherein the interface of the second layer on the first layer forms a bulk heterojunction; and depositing a second electrode over the second layer to form the optoelectronic device. In another embodiment, a first layer having protrusions is deposited over the first electrode, wherein the first layer comprises a first organic small molecule material. For example, when the first layer is an electron donor layer, the first electrode is an anode, the second layer is an electron acceptor layer, and the second electrode is a cathode. As a further example, when the first layer is an electron acceptor layer, the first electrode is a cathode, the second layer is an electron donor layer, and the second electrode is an anode.

Shtein, Max (Princeton, NJ); Yang, Fan (Princeton, NJ); Forrest, Stephen R. (Princeton, NJ)

2008-09-02T23:59:59.000Z

313

Manipulator mounted transfer platform  

DOE Patents [OSTI]

A transfer platform for the conveyance of objects by a manipulator includes a bed frame and saddle clamp secured along an edge of the bed frame and adapted so as to secure the bed frame to a horizontal crosspiece of the manipulator. The platform may thus move with the manipulator in a reciprocal linear path defined by a guide rail. A bed insert may be provided for the support of conveyed objects and a lifting bail may be provided to permit the manipulator arm to install the bed frame upon the crosspiece under remote control.

Dobbins, James C. (Idaho Falls, ID); Hoover, Mark A. (Idaho Falls, ID); May, Kay W. (Idaho Falls, ID); Ross, Maurice J. (Pocatello, ID)

1990-01-01T23:59:59.000Z

314

Graphene-assisted near-field radiative heat transfer between corrugated polar materials  

SciTech Connect (OSTI)

Graphene has attracted great attention in nanoelectronics, optics, and energy harvesting. Here, the near-field radiative heat transfer between graphene-covered corrugated silica is investigated based on the exact scattering theory. It is found that graphene can improve the radiative heat flux between silica gratings by more than one order of magnitude and alleviate the performance sensitivity to lateral shift. The underlying mechanism is mainly attributed to the improved photon tunneling of modes away from phonon resonances. Besides, coating with graphene leads to nonlocal radiative transfer that breaks Derjaguin's proximity approximation and enables corrugated silica to outperform bulk silica in near-field radiation.

Liu, X. L.; Zhang, Z. M., E-mail: zhuomin.zhang@me.gatech.edu [G. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States)

2014-06-23T23:59:59.000Z

315

NREL: Technology Transfer - NREL, Collaborators Complete Gearbox...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

technical innovation within the global wind energy industry. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Licensing...

316

Polarization transfer NMR imaging  

DOE Patents [OSTI]

A nuclear magnetic resonance (NMR) image is obtained with spatial information modulated by chemical information. The modulation is obtained through polarization transfer from a first element representing the desired chemical, or functional, information, which is covalently bonded and spin-spin coupled with a second element effective to provide the imaging data. First and second rf pulses are provided at first and second frequencies for exciting the imaging and functional elements, with imaging gradients applied therebetween to spatially separate the nuclei response for imaging. The second rf pulse is applied at a time after the first pulse which is the inverse of the spin coupling constant to select the transfer element nuclei which are spin coupled to the functional element nuclei for imaging. In a particular application, compounds such as glucose, lactate, or lactose, can be labeled with .sup.13 C and metabolic processes involving the compounds can be imaged with the sensitivity of .sup.1 H and the selectivity of .sup.13 C.

Sillerud, Laurel O. (Los Alamos, NM); van Hulsteyn, David B. (Santa Fe, NM)

1990-01-01T23:59:59.000Z

317

California's LNG Terminals: The Promise of New Gas Supplies  

Broader source: Energy.gov (indexed) [DOE]

LNG Terminals: The LNG Terminals: The Promise of New Gas Supplies November 28, 2007 © 2005 San Diego Gas and Electric and Southern California Gas Company. All copyright and trademark rights reserved What is LNG? LNG is natural gas that has been liquefied, by cooling it to a temperature of -260°F, so it can be shipped across oceans. The gas is then re-vaporized and delivered to customers. 2 Why Do We Need LNG? California Energy Commission * 2007 Integrated Energy Policy Report -North American gas demand to increase at annual rate of 2.1% over next decade -Domestic production expected to remain flat -LNG imports to US expected to increase 14% annually by 2017 3 4 Benefits of LNG * Reduced energy costs for customers * Increased competition between gas suppliers * Improved reliability for customers

318

Completion of decommissioning: Monitoring for site release and license termination  

SciTech Connect (OSTI)

To request termination of a license upon completion of dismantling or decommissioning activities, documenting any residual radioactivity to show that the levels are environmentally acceptable will be necessary. When the regulators approve the decommissioning plan, they establish what the release criteria for the decommissioned site will be at the time of the site release and license termination. The criteria are numeric guidelines for direct radiation in soils and on surfaces. If the regulatory body finds that the measured on-site values are below the guidelines, the site will be acceptable for unrestricted release (no radiological controls or future use). If areas are found above those values, more decontamination or cleanup of these areas may be required unless the regulatory body grants an exemption.

Boing, L.E.

1997-08-01T23:59:59.000Z

319

Terminal Operations for Tube Trailer and Liquid Tanker Filling...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Liquid Tanker Filling: Status, Challenges and R&D Needs 1 Linde covers the entire hydrogen value chain LH 2 storage SupplyStorage CompressionTransfer Dispenser Onsite SMR...

320

LM340/LM78MXX Series 3-Terminal Positive Regulators  

E-Print Network [OSTI]

LM340/LM78MXX Series 3-Terminal Positive Regulators General Description The LM140/LM340A/LM340/LM. The LM340A/LM340/LM7800C series is available in the TO-220 plastic power package, and the LM340-5.0 is available in the SOT-223 package, as well as the LM340-5.0 and LM340-12 in the surface-mount TO-263 package

Ravikumar, B.

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

LM340/LM78XX Series 3-Terminal Positive Regulators  

E-Print Network [OSTI]

LM340/LM78XX Series 3-Terminal Positive Regulators General Description The LM140/LM340A/LM340/LM. The LM340A/LM340/LM7800C series is available in the TO-220 plastic power package, and the LM340-5.0 is available in the SOT-223 package, as well as the LM340-5.0 and LM340-12 in the surface-mount TO-263 package

Goldwasser, Shafi

322

United States National Waste Terminal Storage argillaceous rock studies  

SciTech Connect (OSTI)

The past and present argillaceous rock studies for the US National Waste Terminal Storage Program consist of: (1) evaluation of the geological characteristics of several widespread argillaceous formations in the United States; (2) laboratory studies of the physical and chemical properties of selected argillaceous rock samples; and (3) two full-scale in situ surface heater experiments that simulate the emplacement of heat-generating radioactive waste in argillaceous rock.

Brunton, G.D.

1981-01-01T23:59:59.000Z

323

The Terminal-Oriented Ship Stowage Planning Problem  

Science Journals Connector (OSTI)

Abstract The Ship Stowage Planning Problem is the problem of determining the optimal position of containers to be stowed in a containership. In this paper we address the problem considering the objectives of the terminal management that are mainly related to the yard and transport operations. We propose a Binary Integer Program and a two-step heuristic algorithm. An extensive computational experience shows the efficiency and effectiveness of our approach. A classification scheme for stowage planning problems is also provided.

Maria Flavia Monaco; Marcello Sammarra; Gregorio Sorrentino

2014-01-01T23:59:59.000Z

324

Lower Columbia River Terminal Fisheries Research Project : Final Environmental Assessment.  

SciTech Connect (OSTI)

This notice announces BPA`S`s decision to fund the Oregon Department of Fish and Wildlife (ODFW), the Washington Department of Fish and Wildlife (WDFW), and the Clatsop Economic Development Committee for the Lower Columbia River Terminal Fisheries Research Project (Project). The Project will continue the testing of various species/stocks, rearing regimes, and harvest options for terminal fisheries, as a means to increase lower river sport and commercial harvest of hatchery fish, while providing both greater protection of weaker wild stocks and increasing the return of upriver salmon runs to potential Zone 6 Treaty fisheries. The Project involves relocating hatchery smolts to new, additional pen locations in three bays/sloughs in the lower Columbia River along both the Oregon and Washington sides. The sites are Blind Slough and Tongue Point in Clatsop County, Oregon, and Grays Bay/Deep River, Wahkiakum County, Washington. The smolts will be acclimated for various lengths of time in the net pens and released from these sites. The Project will expand upon an existing terminal fisheries project in Youngs Bay, Oregon. The Project may be expanded to other sites in the future, depending on the results of this initial expansion. BPA`S has determined the project is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an environmental impact statement is not required, and BPA`S is issuing this FONSI.

United States. Bonneville Power Administration.

1995-04-01T23:59:59.000Z

325

Challenges of Advanced Utilization of LNG Cold in Osaka Gas Senboku LNG Terminals  

Science Journals Connector (OSTI)

In this paper, we report the outline of the Senboku LNG terminals, with a focus on Terminal 1, and the facilities using the LNG cold. In addition, by evaluating the ... we consider the vision to improve utilizati...

Takayuki Yamamoto; Yukio Fujiwara…

2012-01-01T23:59:59.000Z

326

Alpha Emission Near 100Sn and the Termination of the rp Process  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Alpha Emission Near 100 Sn and the Termination of the rp Process The astrophysical rp-process is thought to reach a termination point in the region of 100 Sn, via the...

327

E-Print Network 3.0 - affects response termination Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

response is for the new terminal to suspend... transmission scheduling, when a terminal boots and is ready to join the network it has no knowledge... of the network's current...

328

Graphene flakes with defective edge terminations: Universal and topological aspects, and one-dimensional quantum behavior  

E-Print Network [OSTI]

Graphene flakes with defective edge terminations: Universal and topological aspects, and one graphene nanoflakes with reconstructed zigzag edges, where a succes- sion of pentagons and heptagons these spectra. The electronic spectra of trigonal graphene nanoflakes with reczag edge terminations exhibit

Yannouleas, Constantine

329

Ran's C-terminal, Basic Patch, and Nucleotide Exchange Mechanisms in Light of a Canonical  

E-Print Network [OSTI]

Ran's C-terminal, Basic Patch, and Nucleotide Exchange Mechanisms in Light of a Canonical Structure's basic patch and C-terminal switch to nucleotide exchange and effector binding. Other core components

Liu, Jun

330

E-Print Network 3.0 - amino-terminal fragment 1-431 Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for: amino-terminal fragment 1-431 Page: << < 1 2 3 4 5 > >> 1 Proc. Natl. Acad. Sci. USA Vol. 84, pp. 4791-4795, July 1987 Summary: Da amino-terminal heparin-binding fragment,...

331

Scanning Tunneling Macroscopy, Black Holes, and AdS/CFT Bulk Locality  

E-Print Network [OSTI]

We establish resolution bounds on reconstructing a bulk field from boundary data on a timelike hypersurface. If the bulk only supports propagating modes, reconstruction is complete. If the bulk also supports evanescent modes, local reconstruction is not achievable unless one has exponential precision in knowledge of the boundary data. Without exponential precision, for a Minkowski bulk, one can reconstruct a spatially coarse-grained bulk field, but only out to a depth set by the coarse-graining scale. For an asymptotically AdS bulk, reconstruction is limited to a spatial coarse-graining proper distance set by the AdS scale. AdS black holes admit evanescent modes. We study the resolution bound in the large AdS black hole background and provide a dual CFT interpretation. Our results demonstrate that, if there is a black hole of any size in the bulk, then sub-AdS bulk locality is no longer well-encoded in boundary data in terms of local CFT operators. Specifically, in order to probe the bulk on sub-AdS scales using only boundary data in terms of local operators, one must either have such data to exponential precision or make further assumptions about the bulk state.

Soo-Jong Rey; Vladimir Rosenhaus

2014-06-02T23:59:59.000Z

332

Environmental Impact Of Lng Terminals In The Gulf Of Trieste (Northern Adriatic)  

Science Journals Connector (OSTI)

The environmental impact of the proposed offshore gas terminal of LNG (Liquid Natural Gas) in the centre...

V. Mala?I?; J. Faganeli; A. Malej

2008-01-01T23:59:59.000Z

333

Cool heliosheath plasma and deceleration of the upstream solar wind at the termination shock  

E-Print Network [OSTI]

with respect to the ther- mal ions downstream of the termination shock. Most of the solar wind energy

Richardson, John

334

Methods of synthesizing hydroxyapatite powders and bulk materials  

DOE Patents [OSTI]

Methods are provided for producing non-porous controlled morphology hydroxyapatite granules of less than 8 .mu.m by a spray-drying process. Solid or hollow spheres or doughnuts can be formed by controlling the volume fraction and viscosity of the slurry as well as the spray-drying conditions. Methods of providing for homogenous cellular structure hydroxyapatite granules are also provided. Pores or channels or varying size and number can be formed by varying the temperature at which a hydroxyapatite slurry formed in basic, saturated ammonium hydroxide is spray-dried. Methods of providing non-porous controlled morphology hydroxyapatite granules in ammonium hydroxide are also provided. The hydroxyapatite granules and bulk materials formed by these methods are also provided.

Luo, Ping (2843A Forest Ave., Berkeley, CA 94705)

1999-01-12T23:59:59.000Z

335

Methods of synthesizing hydroxyapatite powders and bulk materials  

DOE Patents [OSTI]

Methods are provided for producing non-porous controlled morphology hydroxyapatite granules of less than 8 {micro}m by a spray-drying process. Solid or hollow spheres or doughnuts can be formed by controlling the volume fraction and viscosity of the slurry as well as the spray-drying conditions. Methods of providing for homogeneous cellular structure hydroxyapatite granules are also provided. Pores or channels or varying size and number can be formed by varying the temperature at which a hydroxyapatite slurry formed in basic, saturated ammonium hydroxide is spray-dried. Methods of providing non-porous controlled morphology hydroxyapatite granules in ammonium hydroxide are also provided. The hydroxyapatite granules and bulk materials formed by these methods are also provided. 26 figs.

Luo, P.

1999-01-12T23:59:59.000Z

336

FINITE ELEMENT ANALYSIS OF BULK TRITIUM SHIPPING PACKAGE  

SciTech Connect (OSTI)

The Bulk Tritium Shipping Package was designed by Savannah River National Laboratory. This package will be used to transport tritium. As part of the requirements for certification, the package must be shown to meet the scenarios of the Hypothetical Accident Conditions (HAC) defined in Code of Federal Regulations Title 10 Part 71 (10CFR71). The conditions include a sequential 30-foot drop event, 30-foot dynamic crush event, and a 40-inch puncture event. Finite Element analyses were performed to support and expand upon prototype testing. Cases similar to the tests were evaluated. Additional temperatures and orientations were also examined to determine their impact on the results. The peak stress on the package was shown to be acceptable. In addition, the strain on the outer drum as well as the inner containment boundary was shown to be acceptable. In conjunction with the prototype tests, the package was shown to meet its confinement requirements.

Jordan, J.

2010-06-02T23:59:59.000Z

337

Scenario Projections for Future Market Potentials of Biobased Bulk Chemicals  

Science Journals Connector (OSTI)

Product values are production costs plus profits, and they include variable costs, fixed costs, taxes, insurance fees, plant overheads, allowance for marketing, administration, and R&D, as well as a so-called capital charge representing depreciation and profits. ... Future fossil fuel prices depend on (global) political developments, developments of reserves, exploitation of different fossil resources, and demand. ... This research was partly supported by the European Commission (Research Directorate General), 5th Framework European Network (GROWTH) Program by support of the project “BREW” with the full title “Medium and long-term opportunities and risks of the biotechnological production of bulk chemicals from renewable resources” (Contract No. G5MA-CT-2002-00014). ...

Veronika Dornburg; Barbara G. Hermann; Martin K. Patel

2008-02-23T23:59:59.000Z

338

Bulk viscous FWR with time varying constants revisited  

E-Print Network [OSTI]

We study a full causal bulk viscous cosmological model with flat FRW symmetries and where the ``constants'' $G,c$ and $\\Lambda $ vary. We take into account the possible effects of a $c-$variable into the curvature tensor in order to outline the field equations. Using the Lie method we find the possible forms of the ``constants'' $G$ and $c$ that make integrable the field equations as well as the equation of state for the viscous parameter. It is found that $G,c$ and $\\Lambda $ follow a power law solution verifying the relationship $G/c^{2}=\\kappa .$ Once these possible forms have been obtained we calculate the thermodynamical quantities of the model in order to determine the possible values of the parameters that govern the quantities, finding that only a growing $G$ and $c$ are possible while $% \\Lambda $ behaves as a negative decreasing function.

J. A. Belinchón

2005-01-07T23:59:59.000Z

339

Factors affecting characterization of bulk high-temperature superconductors  

SciTech Connect (OSTI)

Three major factors affect the characterization of bulk high-temperature superconductors in terms of their levitation properties during interaction with permanent magnets. First, the appropriate parameter for the permanent magnet is internal magnetization, not the value of the magnetic field measured at the magnet`s surface. Second, although levitation force grows with superconductor thickness and surface area, for a given permanent magnet size, comparison of levitation force between samples is meaningful when minimum values are assigned to the superconductor size parameters. Finally, the effect of force creep must be considered when time-averaging the force measurements. In addition to levitational force, the coefficient of friction of a levitated rotating permanent magnet may be used to characterize the superconductor.

Hull, J.R. [Argonne National Lab., IL (United States). Energy Technology Div.

1997-11-01T23:59:59.000Z

340

Freeze-out by bulk viscosity driven instabilities  

E-Print Network [OSTI]

We describe a new scenario (first introduced in [G. Torrieri, B. Tom\\'a\\v{s}ik and I. Mishustin, Phys. Rev. C \\textbf{77}, 034903 (2008)]) for freezeout in heavy ion collisions that could solve the lingering problems associated with the so-called HBT puzzle. We argue that bulk viscosity increases as $T$ approaches $T_c$. The fluid {then} becomes unstable against small perturbations, and fragments into clusters of a size much smaller than the total size of the system. These clusters maintain the pre-existing outward-going flow, as a spray of droplets, but develop no flow of their own, and hadronize by evaporation. We show that this scenario can explain HBT data and suggest how it can be experimentally tested.

Torrieri, Giorgio; Mishustin, Igor

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Application of surface and bulk characterization techniques for coal preparation  

SciTech Connect (OSTI)

With the recent acceleration of development of surface-property-based processes for the beneficiation of ultrafine coal, it is essential to establish their underlying scientific principles and to develop mathematical models able to predict how the process will perform on an unknown coal. Various surface properties of importance, surface characterization techniques, and application of these techniques to coal are reviewed. Instrumental techniques used for analyzing bulk composition of organic and/or inorganic matter are also reviewed. The differences in coal and mineral matter properties are highlighted. The effect of particle history, including grinding and oxidation, on the surface properties of coal is discussed. The mechanisms of advanced physical beneficiation processes are reviewed, and the influence of surface properties on the effectiveness of separation between coal and the liberated mineral matter is discussed. Finally, recommendations for future areas of research are made. 121 refs., 19 figs., 17 tabs.

Gala, H.B. (Burns and Roe Services Corp., Pittsburgh, PA (USA)); Hucko, R.E. (USDOE Pittsburgh Energy Technology Center, PA (USA). Coal Preparation and Solids Transportation Div.)

1990-01-01T23:59:59.000Z

342

Effect of bulk density of coking coal on swelling pressure  

Science Journals Connector (OSTI)

Abstract Coking coals are the important raw materials for the iron and steel industries and play an important role on its sustainable development, especially on the stamp-charging coke making with the characteristics of increasing the bulk density. There is a significance on the reasonable usage of the coking coal resource with the reduced production cost, improved efficiency of the economy to develop the stamp-charging coke making technology. Important effects of the density of coking coal on the coking and caking properties were investigated. In the article, the maximum values of swelling pressure and variation of Laowan gas coal and Xinjian 1/3 coking coal, Longhu fat coal and Didao coking coal, which were mined at Shenyang and Qitaihe respectively, were investigated under different bulk densities during the coking. The results showed that when the values of density increased from 0.85 ton/m3 to 1.05 ton/m3, for the Laowan gas coal, swelling pressure variation and even the maximum value changed slightly. The swelling pressure was 3.63 \\{KPa\\} when the density was improved to 1.05 ton/m3; for the Xinjian 1/3 coking coal, the values of swelling pressure changed significantly and the maximum values was 82.88 \\{KPa\\} with the density improved to 1.05 when the coal was heated to 600°C. The coke porosity, which was investigated by automatic microphotometer, decreased from 47.4% to 33.1% with the increasing of the density from 0.85 ton/m3 to 1.05 ton/m3, and the decreased value was 14.3%. Meanwhile, the pore structures of four cokes were characterized by an optical microscope.

Jinfeng Bai; Chunwang Yang; Zhenning Zhao; Xiangyun Zhong; Yaru Zhang; Jun Xu; Bai Xi; Hongchun Liu

2013-01-01T23:59:59.000Z

343

Technology Transfer Reporting Form  

Broader source: Energy.gov (indexed) [DOE]

form is to be completed by the TTO for individual inquiry/case activity during the quarter as required form is to be completed by the TTO for individual inquiry/case activity during the quarter as required by the Technology Transfer Commercialization Act of 2000. Mouse over definitions and descriptions appear over text/check boxes where appropriate. After completing this form, click on the submit button. *If you have no TTO activity for the quarter, please fill in your name, FY and quarter, lab or facility and check the box "No Quarterly Activity". Initial Ombuds Contact: ____________________ Type: Inquiry Case Ombuds Name: __________________________ Time Spent: (Hours) ______________ Final Ombuds Involvement: _________________ Laboratory or Facility: AMES ANL BNL LBNL INL KCP LANL NREL LLNL NBL NETL PNNL NNSS ORNL PXSO SRNL

344

NREL: Technology Transfer - Contacts  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Contacts Contacts Here you'll find contact information and resources to help answer any questions you may have about NREL's technology transfer and commercialization opportunities. Agreement for Commercializing Technology For more information about NREL's agreements for commercializing technology, contact Anne Miller, 303-384-7353. Financial and Funding Assistance NREL does not provide financial or funding assistance for any research projects. If you're a startup company, small business, or an inventor, visit the following Web sites: Grants.gov Small Business Administration. Industry Growth Forum Visit the NREL Industry Growth Forum website or contact Kate Cheesbrough for more information about this event. Investors and Entrepreneurs For more information about NREL's Innovation and Entrepreneurship Center,

345

Transfer and Archive Data  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Management Please remove ALL data from /house! Do you still have data in /house/homedirs? Do you know if you have data in /house/homedirs? Please check now and make a plan for moving that data to the archiver or one of the NERSC file systems (for more information on these filesystems go to File storage and I/O). Moving data from house to DnA The DnA file system is primarily for finished projects, data that is ready to be archived, or data that is shared between groups. It is mounted read-only on the cluster, but you can write to directories on this file system in a few ways: Data Transfer Nodes until December 1, 2013 (examples here) xfer queue on the Genepool cluster until December 1, 2013 (examples here) Moving data from house to Projectb Projectb is where compute jobs run and output both intermediate files as

346

Frame Heat Transfer Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Developing Low-Conductance Window Frames: Capabilities and Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools Arild Gustavsen 1,* , Dariush Arasteh 2 , Bjørn Petter Jelle 3,4 , Charlie Curcija 5 and Christian Kohler 2 1 Department of Architectural Design, History and Technology, Norwegian University of Science and Technology, Alfred Getz vei 3, NO-7491 Trondheim, Norway 2 Windows and Daylighting Group, Lawrence Berkeley National Laboratory, 1 Cyclotron Road Mail Stop 90R3111, Berkeley, CA 94720- 8134, USA 3 Department of Civil and Transport Engineering, Norwegian University of Science and Technology, Høgskoleringen 7A, NO-7491 Trondheim, Norway 4 Department of Building Materials and Structures, SINTEF Building and Infrastructure, Høgskoleringen 7B,NO-7465 Trondheim, Norway

347

Working with SRNL - Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SRNL GO Tech Briefs Contacts Ombudsman Tech Home SRNL Home Working with SRNL Technology Transfer 2014 SRNL Research and Technology Recognition Reception Click to view the 2014...

348

Education and Research Transfer Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transferring and donating education-related Federal equipment to the education and non-profit science and research sectors. Skip Navigation Links Home Newsroom About INL Careers...

349

Phase-Transfer-Catalyzed Oxidations  

Science Journals Connector (OSTI)

Phase-transfer catalysis (PTC) offers many excellent opportunities for conducting oxidation reactions using inexpensive primary oxidants such as oxygen, sodium hypochlorite, hydrogen peroxide, electrooxidation...

Charles M. Starks; Charles L. Liotta; Marc E. Halpern

1994-01-01T23:59:59.000Z

350

Nonlinear Control Design and Analysis of a Multi-Terminal VSC-HVDC System  

E-Print Network [OSTI]

Nonlinear Control Design and Analysis of a Multi-Terminal VSC-HVDC System Yijing Chen1, Jing Dai1-terminal voltage- source converter based high-voltage direct current (multi- terminal VSC-HVDC) system-Source Converter based High-Voltage Direct Current (VSC-HVDC) multipoint networks could be a good solution

Paris-Sud XI, Université de

351

Coherence Transfer in Magnetic Fields  

Science Journals Connector (OSTI)

Some results recently discussed by Chiu for interatomic coherence transfer are shown to have a simple physical interpretation, to be independent of collision model assumed, and to be applicable also to intra -atomic coherence transfer. A derivation using density matrices is presented which takes both depolarizing collisions and backtransfer of coherence into account.

W. E. Baylis

1973-03-01T23:59:59.000Z

352

Bulk viscosity of strange matter and r-modes in neutron stars  

E-Print Network [OSTI]

We discuss bulk viscosity due to non-leptonic processes involving hyperons and Bose-Einstein condensate of negatively charged kaons in neutron stars. It is noted that the hyperon bulk viscosity coefficient is a few order of magnitude larger than that of the case with the condensate. Further it is found that the hyperon bulk viscosity is suppressed in a superconducting phase. The hyperon bulk viscosity efficiently damps the r-mode instability in neutron stars irrespective of whether a superconducting phase is present or not in neutron star interior.

Debarati Chatterjee; Debades Bandyopadhyay

2008-12-30T23:59:59.000Z

353

Bulk photovoltaic effect and photorefractive grating formation in lithium niobate with picosecond light pulses  

Science Journals Connector (OSTI)

I investigated photorefractive grating formation in materials exhibiting the bulk photovoltaic effect on illumination with weak, very short light pulses. For a light pulse shorter...

Okamura, Hideki

2001-01-01T23:59:59.000Z

354

E-Print Network 3.0 - air-processed polymer-fullerene bulk Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are currently seen as attractive materials for optoelectronic applications such as light-emitting diodes and solar cells. Excitonic processes play Summary: phase of bulk...

355

The Role of Surface Chemistry and Bulk Properties on the Cycling...  

Broader source: Energy.gov (indexed) [DOE]

(ANL) Research Objectives: To develop fundamental understanding of surface chemistry and bulk cation distributions on cycling performance and rate capability To...

356

The Role of Surface Chemistry and Bulk Properties on the Cycling...  

Broader source: Energy.gov (indexed) [DOE]

and Rate Capability of Lithium Positive Electrode Materials The Role of Surface Chemistry and Bulk Properties on the Cycling and Rate Capability of Lithium Positive Electrode...

357

Suppression of bulk conductivity in InAs/GaSb broken gap composite quantum wells  

SciTech Connect (OSTI)

The two-dimensional topological insulator state in InAs/GaSb quantum wells manifests itself by topologically protected helical edge channel transport relying on an insulating bulk. This work investigates a way of suppressing bulk conductivity by using gallium source materials of different degrees of impurity concentrations. While highest-purity gallium is accompanied by clear conduction through the sample bulk, intentional impurity incorporation leads to a bulk resistance over 1 M?, independent of applied magnetic fields. In addition, ultra high electron mobilities for GaAs/AlGaAs structures fabricated in a molecular beam epitaxy system used for the growth of Sb-based samples are reported.

Charpentier, Christophe; Fält, Stefan; Reichl, Christian; Nichele, Fabrizio; Nath Pal, Atindra; Pietsch, Patrick; Ihn, Thomas; Ensslin, Klaus; Wegscheider, Werner [Laboratory for Solid State Physics, ETH Zürich, 8093 Zürich (Switzerland)] [Laboratory for Solid State Physics, ETH Zürich, 8093 Zürich (Switzerland)

2013-09-09T23:59:59.000Z

358

Off-line ion source terminal for ISAC at TRIUMF  

SciTech Connect (OSTI)

The off-line ion source (OLIS) terminal consists of a microwave cusp ion source, either a surface ion source or a hybrid surface-arc discharge ion source and an electrostatic switch that allows selecting any one of the sources without mechanical intervention. These sources provide variety of beams to ISAC experiments, for commissioning the accelerators, for setting up the radioactive experiments, and for tuning the beam lines. The microwave ion source has been operational since 1995 and provides singly and doubly charged beams from various stable isotopes for many ISAC experiments at high and low energy areas. Originally its prime goal was to provide beams from gaseous elements, but later two ovens and a sputtering system were added in order to provide beams from liquids and from solids. The surface ion source installed in 2002 can provide low energy spread beams from alkali and semialkali elements. It also has three separate ovens and an ionizer. Therefore, it can provide three different temperature regions simultaneously to provide different beams to ISAC. It is mainly used for laser spectroscopy experiments and other experiments, which require a finite beam quality. A hybrid surface-arc discharge ion source was also developed and installed in order to meet specific demands from experiments. This source terminal is now automated for start up and for mass selection. It is capable of providing stable beams for months without maintenance and it is also capable of providing negative ion beams if required. To date, over 40 different isotopes including many rear isotopes were delivered to various experiments from the OLIS source terminal. Performances of the ion sources and some of the results are discussed.

Jayamanna, K.; Ames, F.; Cojocaru, G.; Baartman, R.; Bricault, P.; Dube, R.; Laxdal, R.; Marchetto, M.; MacDonald, M.; Schmor, P.; Wight, G.; Yuan, D. [TRIUMF, 4004 Wesbrook Mall, Vancouver BC V6T 2A3 (Canada)

2008-02-15T23:59:59.000Z

359

Argonne TDC: Material Transfer Agreements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Material Transfer Agreements Material Transfer Agreements Materials produced by researchers at Argonne National Laboratory are often of interest to the private sector. Depending on the circumstances under which the material was developed, such material may be transferred to industry for a number of reasons (e.g., testing, feasibility studies, etc.). This transfer is usually temporary and can initiate a more formal working arrangement. At this time, TDC, in conjunction with Argonne's Legal Department, provides such agreements on an as-needed basis. If you would like to acquire material produced by Argonne researchers during the course of a federally funded research project, please contact TDC or fill out a Material Transfer Agreement request form. Printed or electronically downloaded copies may become obsolete. Before using such a copy for work direction, employees must verify that it is current by comparing its revision number with that of the online version. Obsolete forms will be rejected.

360

Experiences with a two terminal-pair digital impedance bridge  

E-Print Network [OSTI]

This paper describes the realization of a two terminal-pair digital impedance bridge and the test measurements performed with it. The bridge, with a very simple architecture, is based on a commercial two-channel digital signal synthesizer and a synchronous detector. The bridge can perform comparisons between impedances having arbitrary phase and magnitude ratio: its balance is achieved automatically in less than a minute. $R$-$C$ comparisons with calibrated standards, at kHz frequency and 100 kohm magnitude level, give ratio errors of the order of $10^{-6}$, with potential for further improvements.

Callegaro, Luca; Kampik, Marian; Kim, Dan Bee; Ortolano, Massimo; Pourdanesh, Faranak

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Proton-Coupled Electron Transfer  

SciTech Connect (OSTI)

Proton-Coupled Electron Transfer (PCET) describes reactions in which there is a change in both electron and proton content between reactants and products. It originates from the influence of changes in electron content on acid?base properties and provides a molecular-level basis for energy transduction between proton transfer and electron transfer. Coupled electron?proton transfer or EPT is defined as an elementary step in which electrons and protons transfer from different orbitals on the donor to different orbitals on the acceptor. There is (usually) a clear distinction between EPT and H-atom transfer (HAT) or hydride transfer, in which the transferring electrons and proton come from the same bond. Hybrid mechanisms exist in which the elementary steps are different for the reaction partners. EPT pathways such as PhO•/PhOH exchange have much in common with HAT pathways in that electronic coupling is significant, comparable to the reorganization energy with H{sub DA} ~ ?. Multiple-Site Electron?Proton Transfer (MS-EPT) is an elementary step in which an electron?proton donor transfers electrons and protons to different acceptors, or an electron?proton acceptor accepts electrons and protons from different donors. It exploits the long-range nature of electron transfer while providing for the short-range nature of proton transfer. A variety of EPT pathways exist, creating a taxonomy based on what is transferred, e.g., 1e{sup -}/2H{sup +} MS-EPT. PCET achieves “redox potential leveling” between sequential couples and the buildup of multiple redox equivalents, which is of importance in multielectron catalysis. There are many examples of PCET and pH-dependent redox behavior in metal complexes, in organic and biological molecules, in excited states, and on surfaces. Changes in pH can be used to induce electron transfer through films and over long distances in molecules. Changes in pH, induced by local electron transfer, create pH gradients and a driving force for long-range proton transfer in Photosysem II and through other biological membranes. In EPT, simultaneous transfer of electrons and protons occurs on time scales short compared to the periods of coupled vibrations and solvent modes. A theory for EPT has been developed which rationalizes rate constants and activation barriers, includes temperature- and driving force (?G)-dependences implicitly, and explains kinetic isotope effects. The distance-dependence of EPT is dominated by the short-range nature of proton transfer, with electron transfer being far less demanding.Changes in external pH do not affect an EPT elementary step. Solvent molecules or buffer components can act as proton donor acceptors, but individual H2O molecules are neither good bases (pK{sub a}(H{sub 3}O{sup +}) = ?1.74) nor good acids (pK{sub a}(H{sub 2}O) = 15.7). There are many examples of mechanisms in chemistry, in biology, on surfaces, and in the gas phase which utilize EPT. PCET and EPT play critical roles in the oxygen evolving complex (OEC) of Photosystem II and other biological reactions by decreasing driving force and avoiding high-energy intermediates.

Weinberg, Dave; Gagliardi, Christopher J.; Hull, Jonathan F; Murphy, Christine Fecenko; Kent, Caleb A.; Westlake, Brittany C.; Paul, Amit; Ess, Daniel H; McCafferty, Dewey Granville; Meyer, Thomas J

2012-01-01T23:59:59.000Z

362

THE UNLV FOUNDATION MONETARY TRANSFER FORM  

E-Print Network [OSTI]

THE UNLV FOUNDATION MONETARY TRANSFER FORM (Use one form for each account) Date Department Amount Transfer from Foundation Account Name UNLV Foundation Foundation Account Number Transfer to University contributions to this fund were accepted. Multiple Transfer A monetary transfer from the UNLV Foundation

Hemmers, Oliver

363

Effect of Contacts in Organic Bulk Heterojunction Solar Cells  

Science Journals Connector (OSTI)

Interfaces play an important role in emerging organic electronic applications. In order to optimize and control the performance in organic devices such as organic solar cells, a comprehensive understanding of the contacts is essential. However, despite the vast progress made, a fundamental theory of the physical processes taking place at the contacts is still lacking. In this work, a numerical device model is used to clarify the effect of imperfect contacts in organic bulk heterojunction solar cells. The effect of increased injection barriers, reduced surface recombination, interfacial minority carrier doping, and traps for majority carriers at the electrodes causing reduced efficiencies is simulated. Two distinctly different underlying mechanisms leading to different S-shaped features are found, both leading to an effective shift of the built-in voltage. In the case of an extraction barrier to majority carriers at the contact, such as reduced surface recombination, the S kink is due to an induced diffusion potential. In the case of interfacial doping or traps, the S kink results from band bending caused by the fixed or trapped space charge. We derive analytical expressions describing the effective reduction of the built-in voltage and the (effective) open-circuit voltage providing means to quantify and distinguish the mechanisms. We show how to experimentally differentiate between these effects and provide tools to extract the relevant physical parameters.

Oskar J. Sandberg; Mathias Nyman; Ronald Österbacka

2014-03-27T23:59:59.000Z

364

Multi-parameter on-line coal bulk analysis  

SciTech Connect (OSTI)

This was a four-year grant that was given a no cost extension for one more year. The purpose of the grant was to develop a pulsed neutron-based technique that could measure on-line all the major and minor elements in coal. Such measurements would allow the continuous monitoring of bulk parameters such as coal heating value (BTU/lb), volatile matter, moisture etc., deemed important to the coal industry. Such parameters, along with the continuous measurement of elements such as sulfur and sodium, are of major economic and environmental concern, and their measurement would assist in a more efficient use of the coal-fired boilers, as well as limiting emissions controlled by the 1990 Clean Air Act Amendments. It was hoped that this study would lead to the development of a technique able to create a marketable product, an On-Line Elemental Coal Analyzer. The study was separated in the following major parts: (1) Devise an efficient system for the detection of gamma rays; (2) Prior to experimentation, perform modeling and simulations for items such as detector shielding, coal sample configuration, and neutron tube collimation; (3) Develop a computer code for data reduction and analysis; (4) Measure the elemental composition of various coal samples; and (5) Design a prototype, on-line elemental coal analyzer, based on the PFTNA principle.

NONE

1999-02-01T23:59:59.000Z

365

International Round-Robin Testing of Bulk Thermoelectrics  

SciTech Connect (OSTI)

Two international round-robin studies were conducted on transport properties measurements of bulk thermoelectric materials. The study discovered current measurement problems. In order to get ZT of a material four separate transport measurements must be taken. The round-robin study showed that among the four properties Seebeck coefficient is the one can be measured consistently. Electrical resistivity has +4-9% scatter. Thermal diffusivity has similar +5-10% scatter. The reliability of the above three properties can be improved by standardizing test procedures and enforcing system calibrations. The worst problem was found in specific heat measurements using DSC. The probability of making measurement error is great due to the fact three separate runs must be taken to determine Cp and the baseline shift is always an issue for commercial DSC. It is suggest the Dulong Petit limit be always used as a guide line for Cp. Procedures have been developed to eliminate operator and system errors. The IEA-AMT annex is developing standard procedures for transport properties testing.

Wang, Hsin [ORNL; Porter, Wallace D [ORNL; Bottner, Harold [Fraunhofer-Institute, Freiburg, Germany; Konig, Jan [Fraunhofer-Institute, Freiburg, Germany; Chen, Lidong [Chinese Academy of Sciences; Bai, Shengqiang [Chinese Academy of Sciences; Tritt, Terry M. [Clemson University; Mayolett, Alex [Corning, Inc; Smith, Charlene [Corning, Inc; Harris, Fred [ZT-Plus; Sharp, Jeff [Marlow Industries, Inc; Lo, Jason [CANMET - Materials Technology Laboratory, Natural Resources of Canada; Keinke, Holger [University of Waterloo, Canada; Kiss, Laszlo I. [University of Quebec at Chicoutimi

2011-11-01T23:59:59.000Z

366

Transmission of sound through suspended ceilings from HVAC terminal units  

Science Journals Connector (OSTI)

An ASHRAE project to investigate factors determining the sound pressure levels in rooms below ceilings concealing air?terminal units has been completed. Four terminal units installed close to the six ceiling types used were the major noise sources. They were supplemented by two simulators powered by loudspeakers. Sound power was measured for each device in the 156 cubic meter test room in its reverberant condition. The levels in the room were measured for each combination of source and ceiling tile. Sound pressure level was measured as a function of distance from two sources in the room below. The main intent of the project was to validate ARI Standard 885 which provides a calculation method for such situations. Differences among ceiling types were less than expected; leakage around the edges of each panel is a dominant transmission path. Ceiling attenuations at low frequencies were found to depend on the area of the lower face of the units. Sound levels in the room were essentially uniform when the source was above the ceiling. The decay of sound with distance from the sources below the ceiling was found to depend on the inverse of the room reverberation time.

Alf Warnock

1998-01-01T23:59:59.000Z

367

TECH TRANSFER TECHNOLOGY TRANSFER PROGRAM INSTITUTE OF TRANSPORTATION STUDIES UNIVERSITY OF CALIFORNIA, BERKELEY  

E-Print Network [OSTI]

TECH TRANSFER TECHNOLOGY TRANSFER PROGRAM · INSTITUTE OF TRANSPORTATION STUDIES · UNIVERSITY THURSDAY SATURDAYFRIDAYWEDNESDAYTUESDAY TECHNOLOGY TRANSFER PROGRAM · INSTITUTE OF TRANSPORTATION STUDIES's to another year of working safer and smarter. Laura Melendy Director, Technology Transfer Program #12;AUGUST

California at Berkeley, University of

368

NREL: Technology Transfer Home Page  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Transfer Technology Transfer Search More Search Options Site Map The National Renewable Energy Laboratory (NREL) works with industry and organizations to transfer renewable energy and energy efficiency technologies into the marketplace. Working with Us We offer many opportunities and ways for you to partner with us. Learn more about our technology partnership agreements and services: Agreements for Commercializing Technology Cooperative Research and Development Agreements Technologies Available for Licensing Technology Partnerships Work for Others Research Facilities NREL follows its principles for establishing mutually beneficial technology partnerships. Through our commercialization programs, we work to stimulate the market for clean energy technologies and foster the growth of clean energy start-ups.

369

Summary Report on Federal Laboratory Technology Transfer  

E-Print Network [OSTI]

Summary Report on Federal Laboratory Technology Transfer Agency Approaches; FY 2001 Activity Metrics and Outcomes 2002 Report to the President and the Congress under the Technology Transfer: FEDERAL LAB TECHNOLOGY TRANSFER TABLE OF CONTENTS LIST OF FIGURES AND TABLES

Perkins, Richard A.

370

HEAT AND MOISTURE TRANSFER THROUGH CLOTHING  

E-Print Network [OSTI]

R. C. Eberhart (ed), Heat transfer in medicine and biology.Convective and radiative heat transfer coefficients forCheng, X. -Y. 2005. Heat and moisture transfer with sorption

Voelker, Conrad; Hoffmann, Sabine; Kornadt, Oliver; Arens, Edward; Zhang, Hui; Huizenga, Charlie

2009-01-01T23:59:59.000Z

371

Heat Transfer from a Rotating Disk  

Science Journals Connector (OSTI)

...August 1956 research-article Heat Transfer from a Rotating Disk E. C. Cobb...little has been published on the heat transfer. For laminar conditions theoretical...experimental investigation of the heat transfer for a range of conditions from...

1956-01-01T23:59:59.000Z

372

Coordination of Transmission Line Transfer Capabilities  

E-Print Network [OSTI]

Coordination of Transmission Line Transfer Capabilities Final Project Report Power Systems since 1996 PSERC #12;Power Systems Engineering Research Center Coordination of Transmission Line Summary The maximum power that can be transferred over any transmission line, called the transfer capacity

373

Heat and moisture transfer through clothing  

E-Print Network [OSTI]

Mathematical simulation of heat and moisture transfer in aand R. C. Eberhart (ed), Heat transfer in medicine andFan, J. 2008. Study of heat and moisture transfer within

Voelker, Conrad; Hoffmann, Sabine; Kornadt, Oliver; Arens, Edward; Zhang, Hui; Huizenga, Charlie

2009-01-01T23:59:59.000Z

374

Explosive shock processing of Pr2Fe14B/ Fe exchange-coupled nanocomposite bulk magnets  

E-Print Network [OSTI]

Explosive shock processing of Pr2Fe14B/ ­Fe exchange-coupled nanocomposite bulk magnets Z.Q. Jin between neigh- boring magnetic phases.1,2 The prerequisite for effective exchange coupling is a small are usually used to produce single-phase microcrystalline permanent magnets, are not favored in making bulk

Liu, J. Ping

375

Corrosion performances in simulated body fluids and cytotoxicity evaluation of Fe-based bulk metallic glasses  

E-Print Network [OSTI]

Corrosion performances in simulated body fluids and cytotoxicity evaluation of Fe-based bulk December 2011 Available online 27 December 2011 Keywords: Bulk metallic glass Corrosion Biocompatibility Electrochemical characterization Biomedical applications The aim of this work is to investigate the corrosion

Zheng, Yufeng

376

Spectroscopic Imaging of Single AtomsWithin a Bulk Solid S. D. Findlay,2  

E-Print Network [OSTI]

identification of single atoms on surfaces, but they cannot probe individual atoms within the bulk environmentSpectroscopic Imaging of Single AtomsWithin a Bulk Solid M.Varela,1 S. D. Findlay,2 A. R. Lupini,1, but their spectroscopic identification, with spatial resolution at the atomic scale. This substan- tial improvement

Pennycook, Steve

377

Equality of bulk and edge Hall conductances for continuous magnetic random Schrödinger operators  

E-Print Network [OSTI]

In this note, we prove the equality of the quantum bulk and the edge Hall conductances in mobility edges and in presence of disorder. The bulk and edge perturbations can be either of electric or magnetic nature. The edge conductance is regularized in a suitable way to enable the Fermi level to lie in a region of localized states.

Amal Taarabt

2014-03-30T23:59:59.000Z

378

Bulk viscosity-driven suppression of shear viscosity effects on the flow harmonics at RHIC  

E-Print Network [OSTI]

The interplay between shear and bulk viscosities on the flow harmonics, $v_n$'s, at RHIC is investigated using the newly developed relativistic 2+1 hydrodynamical code v-USPhydro that includes bulk and shear viscosity effects both in the hydrodynamic evolution and also at freeze-out. While shear viscosity is known to attenuate the flow harmonics, we find that the inclusion of bulk viscosity decreases the shear viscosity-induced suppression of the flow harmonics bringing them closer to their values in ideal hydrodynamical calculations. Depending on the value of the bulk viscosity to entropy density ratio, $\\zeta/s$, in the quark-gluon plasma, the bulk viscosity-driven suppression of shear viscosity effects on the flow harmonics may require a re-evaluation of the previous estimates of the shear viscosity to entropy density ratio, $\\eta/s$, of the quark-gluon plasma previously extracted by comparing hydrodynamic calculations to heavy ion data.

J. Noronha-Hostler; J. Noronha; F. Grassi

2014-06-12T23:59:59.000Z

379

An overview of rotating machine systems with high-temperature bulk superconductors  

Science Journals Connector (OSTI)

The paper contains a review of recent advancements in rotating machines with bulk high-temperature superconductors (HTS). The high critical current density of bulk HTS enables us to design rotating machines with a compact configuration in a practical scheme. The development of an axial-gap-type trapped flux synchronous rotating machine together with the systematic research works at the Tokyo University of Marine Science and Technology since 2001 are briefly introduced. Developments in bulk HTS rotating machines in other research groups are also summarized. The key issues of bulk HTS machines, including material progress of bulk HTS, in situ magnetization, and cooling together with AC loss at low-temperature operation are discussed.

Difan Zhou; Mitsuru Izumi; Motohiro Miki; Brice Felder; Tetsuya Ida; Masahiro Kitano

2012-01-01T23:59:59.000Z

380

Data Transfer Nodes Yield Results!  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DTN DTN Data Transfer Nodes Yield Results August 1, 2011 | Tags: Accelerator Science, Data Transfer, ESnet Linda Vu, +1 510 495 2402, lvu@lbl.gov The ability to reliably move and share data around the globe is essential to scientific collaboration, that's why three Department of Energy (DOE) Scientific Computing Centers-Argonne and Oak Ridge Leadership Computing Facilities, and the National Energy Research Scientific Computing Center (NERSC)-have teamed up to focus on optimizing wide area network (WAN) transfers. This ongoing effort began several years ago when each site deployed dedicated transfer nodes (DTNs), optimized for carrying data between the DOE facilities. Today, engineers from each site continue to meet regularly with DOE's Energy Sciences Network staff (ESnet) to develop strategies

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Heat transfer in microsphere insulation  

Science Journals Connector (OSTI)

The results of an investigation of heat transfer in a new type of insulation (microsphere insulation) are presented. The effects of the ... gas pressure on the thermal conductivity of the insulation were investig...

R. Wawryk; J. Rafa?owicz

382

Preparing for Transfer Biological Engineering  

E-Print Network [OSTI]

Environmental Engineering Game Design Industrial Systems & Information Technology Information Science MaterialsPreparing for Transfer Majors: Biological Engineering Chemical Engineering Civil Engineering Computer Science Electrical & Computer Engineering Engineering Physics Environmental Engineering

Walter, M.Todd

383

Electrohydrodynamically enhanced condensation heat transfer  

E-Print Network [OSTI]

In a condenser the thickness of the liquid condensate film covering the cooled surface constitutes a resistance to the heat transfer. By establishing a non uniform electric field in the vicinity of the condensation surface the extraction of liquid...

Wawzyniak, Markus

2012-06-07T23:59:59.000Z

384

Insoluble Phase-Transfer Catalysts  

Science Journals Connector (OSTI)

An important problem facing the designer of industrial phase-transfer catalysis (PTC) processes using soluble PTC catalysts concerns the removal of the catalyst from the reaction mixture, and its economic recy...

Charles M. Starks; Charles L. Liotta; Marc E. Halpern

1994-01-01T23:59:59.000Z

385

Technology_Transfer_Memo.pdf | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

TechnologyTransferMemo.pdf TechnologyTransferMemo.pdf TechnologyTransferMemo.pdf More Documents & Publications PolicyStatementonTechnologyTransfer.pdf...

386

Method Of Transferring Strained Semiconductor Structures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Of Transferring Strained Semiconductor Structures Of Transferring Strained Semiconductor Structures Method Of Transferring Strained Semiconductor Structures The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. June 25, 2013 Method Of Transferring Strained Semiconductor Structures The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. Available for thumbnail of Feynman Center (505) 665-9090 Email Method Of Transferring Strained Semiconductor Structures The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having

387

Transferring Data from Batch Jobs at NERSC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Transferring Data from Batch Jobs Transferring Data from Batch Jobs Examples Once you are set up for automatic authentication (see HPSS Passwords) you can access HPSS within batch...

388

Sandia National Laboratories: Small Business Technology Transfer...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Business Technology Transfer Research program JBEI Research Receives Strong Industry Interest in DOE Technology Transfer Call On September 18, 2013, in Biofuels, Biomass, Energy,...

389

Secretary Bodman Announces DOE Technology Transfer Coordinator...  

Broader source: Energy.gov (indexed) [DOE]

DOE Technology Transfer Coordinator Secretary Bodman Announces DOE Technology Transfer Coordinator June 29, 2007 - 2:36pm Addthis Establishes Policy Board; Strengthens DOE Efforts...

390

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network [OSTI]

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division to them in California. TECHNOLOGY TRANSFER PROGRAM MAY 2011, VOL. 3, NO. 1 California's Transition

California at Berkeley, University of

391

Heat Transfer Enhancement in Thermoelectric Power Generation.  

E-Print Network [OSTI]

??Heat transfer plays an important role in thermoelectric (TE) power generation because the higher the heat-transfer rate from the hot to the cold side of… (more)

Hu, Shih-yung

2009-01-01T23:59:59.000Z

392

Heat Transfer Fluids Containing Nanoparticles | Argonne National...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Heat Transfer Fluids Containing Nanoparticles Technology available for licensing: A stable, nonreactive nanofluid that exhibits enhanced heat transfer properties with only a...

393

Obtaining the Bidirectional Transfer Distribution Function of Isotropically  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Obtaining the Bidirectional Transfer Distribution Function of Isotropically Obtaining the Bidirectional Transfer Distribution Function of Isotropically Scattering Materials Using an Integrating Sphere Title Obtaining the Bidirectional Transfer Distribution Function of Isotropically Scattering Materials Using an Integrating Sphere Publication Type Journal Article LBNL Report Number LBNL-61826 Year of Publication 2007 Authors Jonsson, Jacob C., and Henrik Branden Journal Optics Communications Volume 277 Pagination 228-236 Call Number LBNL-61826 Abstract This paper demonstrates a method to determine the bidirectional transfer distribution function (BTDF) using an integrating sphere. Information about the sample's angle dependent scattering is obtained by making transmittance measurements with the sample at different distances from the integrating sphere. Knowledge about the illuminated area of the sample and the geometry of the sphere port in combination with the measured data combines to an system of equations that includes the angle dependent transmittance. The resulting system of equations is an ill-posed problem which rarely gives a physical solution. A solvable system is obtained by using Tikhonov regularization on the ill-posed problem. The solution to this system can then be used to obtain the BTDF. Four bulk-scattering samples were characterised using both two goniophotometers and the described method to verify the validity of the new method. The agreement shown is great for the more diffuse samples. The solution to the low-scattering samples contains unphysical oscillations, but still gives the correct shape of the solution. The origin of the oscillations and why they are more prominent in low-scattering samples are discussed.

394

Contact NETL Technology Transfer Group  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NETL Technology Transfer Group techtransfer@netl.doe.gov May 2012 Significance * Applicable to subcritical and supercritical air-fired boiler designs * Eliminates the need to mimic air-fired heat transfer characteristics in order to meet existing dry steam load demands * Reduces retrofit complexity, time, and cost Applications * Retrofitting of conventional air-fired boilers Opportunity Research is active on the patent-pending technology, titled "Temperature

395

Spring 2014 Heat Transfer -2  

E-Print Network [OSTI]

Spring 2014 Heat Transfer - 2 A thin electronic chip is in the shape of a square wafer, b = 1 cm surface of the chip with a heat transfer coefficient of h = 100 W/m2 -K. Assume the chip has a uniform per side with a mass of m = 0.3 grams and specific heat of C = 103 J/kg-K. The chip is mounted

Virginia Tech

396

Energy Cost of Information Transfer  

Science Journals Connector (OSTI)

From thermodynamic and causality considerations a general upper bound on the rate at which information can be transferred in terms of the message energy is inferred. This bound is consistent with Shannon's bounds for a band-limited channel. It prescribes the minimum energy cost for information transferred over a given time interval. As an application, a fundamental upper bound of 1015 operations/sec on the speed of an ideal digital computer is established.

Jacob D. Bekenstein

1981-03-09T23:59:59.000Z

397

Chapter 7 - LNG Plant and Regasification Terminal Operations  

Science Journals Connector (OSTI)

Abstract A liquefied natural gas (LNG) production plant is designed to meet the production target with specifications that meet the contractual agreement while satisfying the emission and environmental regulations. The LNG liquefaction plant is a complex process, and for this reason, it is important to understand the design limitations and the process interaction among the different units for plant operation. The focus of this chapter is to discuss the process parameters and typical pitfalls that an operator may encounter in a day-to-day operation. Note that only the major process units that are critical to the LNG plant and regasification operation are addressed in the following sections. The generic units such as NGL fractionation units, condensate hydrotreating unit, refrigeration unit, and nitrogen rejection unit are left to the reader. This chapter also briefly addresses the general guidelines on the startup and shutdown of the LNG plant and the regasification terminal.

2014-01-01T23:59:59.000Z

398

Power line carrier interference from HVDC converter terminals  

SciTech Connect (OSTI)

Power line carrier (PLC) equipment typically operates in the frequency range from 25 kHz to 300 kHz. Interference studies for HVDC converters usually concentrate on interference from noise sources within this frequency range. However, operating experience at the Sandy Pond converter terminal has indicated that PLC equipment is also susceptible to interference from sources of power system harmonics below the PLC frequency range. Extensive field testing and analytical studies have shown that each PLC circuit has a resonant frequency below the operating frequency. If excited at this resonant frequency, high voltages may exist within the PLC circuit. The resulting saturation of PLC components leads to local generation of radio frequency (RF) noise that interferes with proper operation of PLC circuits. Sources of power system harmonics in the 3-10 kHz range, such as line commutated dc converters, are potential sources of this type of interference.

Tatro, P.J.; Adamson, K.A. (New England Power Service Co., Westborough, MA (United States)); Eitzmann, M.A.; Smead, M. (GE Industrial and Power Systems, Schenectady, NY (United States). Power Systems Engineering Dept.)

1993-07-01T23:59:59.000Z

399

Multi-terminal Subsystem Model Validation for Pacific DC Intertie  

SciTech Connect (OSTI)

this paper proposes to validate dynamic model of Pacific DC Intertie with the concept of hybrid simulation by combing simulation with PMU measurements. The Playback function available in GE PSLF is adopted for hybrid simulation. It is demonstrated for the first time the feasibility of using Playback function on multi-terminal subsystem. Sensitivity studies are also presented as a result of common PMU measurement quality problem, ie, offset noise and time synchronization. Results indicate a good tolerance of PDCI model generally. It is recommended that requirements should apply to phasor measurements in model validation work to ensure better analysis. Key parameters are identified based on impact of value change to model behavior. Two events are employed for preliminary model validation with PMU measurements. Suggestions are made for PDCI model validation work in the future.

Yang, Bo; Huang, Zhenyu; Kosterev, Dmitry

2008-07-20T23:59:59.000Z

400

Hyperreal Waves on Transfinte, Terminated, Distortionless and Lossless, Transmission Lines  

E-Print Network [OSTI]

A prior work (see Chapter 8 of the book, ``Graphs and Networks: Transfinite and Nonstandard,'' Birkhauser-Boston, Cambridge, Mass., USA, 2004) examined the propagation of an electromagnetic wave on a transfinite transmission line, transfinite in the sense that infinitely many one-way infinite transmission lines are connected in cascade. That there are infinitely many such one-way infinite lines results in the wave propagating without ever reflecting at some discontinuity. The present work examines the cascade where the cascade terminates after only finitely many one-way infinite transmission lines, with the result that reflected waves are now produced at both the far end as well as at the initial end of the transfinite transmission line. The question of whether the reflected waves are infini tesimal or appreciable and whether they sum to an infinitesimal or appreciable amount are resolved for both distortionless and lossless lines. Finally, the generalizations to higher ranks of transfiniteness is briefly summarized.

A. H. Zemanian

2004-06-10T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Table 2. Change in the Number of Personal Computers and Computer Terminals  

U.S. Energy Information Administration (EIA) Indexed Site

2 PC's and Computer Terminals 2 PC's and Computer Terminals Table 2. Change in the Number of Personal Computers and Computer Terminals in Commercial Buildings, 1992 to 1995 PCs and Terminals (thousand) PCs and Terminals per Thousand Employees PCs and Terminals per Million Sq. Ft. 1992 1995 Change (percent) 1992 1995 Change (percent) 1992 1995 Change (percent) All Buildings 29,752 43,003 45 431 571 32 463 732 58 Principal Building Activity Assembly 845 1,763 109 167 258 54 102 262 157 Education 6,004 8,046 34 877 847 -3 710 1,039 46 Food Sales 85 206 142 101 316 213 113 321 184 Food Service 146 276 89 65 118 82 98 204 108 Health Care 1,128 2,549 126 334 569 70 641 1,092 70 Lodging 651 1,296 99 322 472 47 225 358 59

402

U-027: RSA Key Manager Appliance Session Logout Bug Fails to Terminate  

Broader source: Energy.gov (indexed) [DOE]

7: RSA Key Manager Appliance Session Logout Bug Fails to 7: RSA Key Manager Appliance Session Logout Bug Fails to Terminate Sessions U-027: RSA Key Manager Appliance Session Logout Bug Fails to Terminate Sessions November 4, 2011 - 8:00am Addthis PROBLEM: RSA Key Manager Appliance Session Logout Bug Fails to Terminate Sessions. PLATFORM: RSA Key Manager Appliance 2.7 Service Pack 1 ABSTRACT: A remote authenticated user session may not terminate properly. reference LINKS: SecurityTracker Alert ID: 1026276 SecurityFocus Bug Traq Seclists: ESA-2011-035 CVE-2011-2740 IMPACT ASSESSMENT: Medium Discussion: A vulnerability was reported in RSA Key Manager Appliance. A remote authenticated user session may not terminate properly. When using Firefox 4 and 5, an authenticated user session is not terminated properly when logging out.

403

Terminal Box Airflow Reset: An Effective Operation and Control Strategy for Comfort Improvement and Energy Conservation  

E-Print Network [OSTI]

terminal boxes, the maximum potential zone load during unoccupied hours must be considered. The airflow reset may be implemented using the terminal box controller only. However, central control systems may have to be used for most of the existing... control systems. One method is to develop two control schedules (occupied and unoccupied). Based on the time, the central control system automatically switch between two schedules. (downloads the un-occupied schedule to the terminal box controller...

Liu, M.; Abbas, M.; Zhu, Y.; Claridge, D. E.

2002-01-01T23:59:59.000Z

404

Modeling of Electronically Commutated Motor Controlled Fan-powered Terminal Units  

E-Print Network [OSTI]

Feet Per Minute ECM Electronically Commutated Motor FPTU Fan Powered Terminal Unit Pdown Downstream Static Pressure PF Power Factor Pup Upstream Static Pressure SCR Silicon Controlled Rectifier THD Total Harmonic Distortion VAV Variable Air... parallel unit pressurizes the FPTU causing some of the primary air to leak out of the unit. Another difference between them is that series terminal units allow the primary air system to operate at a lower static pressure because the terminal unit fan...

Edmondson, Jacob Lee

2011-02-22T23:59:59.000Z

405

A 3D radiative transfer framework: II. line transfer problems  

E-Print Network [OSTI]

Higher resolution telescopes as well as 3D numerical simulations will require the development of detailed 3D radiative transfer calculations. Building upon our previous work we extend our method to include both continuum and line transfer. We present a general method to calculate radiative transfer including scattering in the continuum as well as in lines in 3D static atmospheres. The scattering problem for line transfer is solved via means of an operator splitting (OS) technique. The formal solution is based on a long-characteristics method. The approximate $\\Lambda$ operator is constructed considering nearest neighbors {\\em exactly}. The code is parallelized over both wavelength and solid angle using the MPI library. We present the results of several test cases with different values of the thermalization parameter and two choices for the temperature structure. The results are directly compared to 1D spherical tests. With our current grid setup the interior resolution is much lower in 3D than in 1D, nevertheless the 3D results agree very well with the well-tested 1D calculations. We show that with relatively simple parallelization that the code scales to very large number of processors which is mandatory for practical applications. Advances in modern computers will make realistic 3D radiative transfer calculations possible in the near future. Our current code scales to very large numbers of processors, but requires larger memory per processor at high spatial resolution.

E. Baron; Peter H. Hauschildt

2007-03-16T23:59:59.000Z

406

Stability of Bulk Metallic Glass Structure. Final Report  

SciTech Connect (OSTI)

The fundamental origins of the stability of the (Pd-Ni){sub 80}P{sub 20} bulk metallic glasses (BMGs), a prototype for a whole class of BMG formers, were explored. While much of the properties of their BMGs have been characterized, their glass-stability have not been explained in terms of the atomic and electronic structure. The local structure around all three constituent atoms was obtained, in a complementary way, using extended X-ray absorption fine structure (EXAFS), to probe the nearest neighbor environment of the metals, and extended energy loss fine structure (EXELFS), to investigate the environment around P. The occupied electronic structure was investigated using X-ray photoelectron spectroscopy (XPS). The (Pd-Ni){sub 80}P{sub 20} BMGs receive their stability from cumulative, and interrelated, effects of both atomic and electronic origin. The stability of the (Pd-Ni){sub 80}P{sub 20} BMGs can be explained in terms of the stability of Pd{sub 60}Ni{sub 20}P{sub 20} and Pd{sub 30}Ni{sub 50}P{sub 20}, glasses at the end of BMG formation. The atomic structure in these alloys is very similar to those of the binary phosphide crystals near x=0 and x=80, which are trigonal prisms of Pd or Ni atoms surrounding P atoms. Such structures are known to exist in dense, randomly-packed systems. The structure of the best glass former in this series, Pd{sub 40}Ni{sub 40}P{sub 20} is further described by a weighted average of those of Pd{sub 30}Ni{sub 50}P{sub 20} and Pd{sub 60}Ni{sub 20}P{sub 20}. Bonding states present only in the ternary alloys were found and point to a further stabilization of the system through a negative heat of mixing between Pd and Ni atoms. The Nagel and Tauc criterion, correlating a decrease in the density of states at the Fermi level with an increase in the glass stability, was consistent with greater stability of the Pd{sub x}Ni{sub 80-x}P{sub 20} glasses with respect to the binary alloys of P. A valence electron concentration of 1.8 e/a, which ensures the superpositioning of the first peak in the structure factor with twice the Fermi momentum, was used to calculate the interatomic potential of these alloys. The importance of Pd to the stability of the alloys is evidenced by the fact that replacing Ni and Pd places the nearest neighbor distances at more attractive positions in this potential.

Jain, H.; Williams, D. B.

2003-06-01T23:59:59.000Z

407

Bulk Nanostructured FCC Steels With Enhanced Radiation Tolerance  

SciTech Connect (OSTI)

The objective of this project is to increase radiation tolerance in austenitic steels through optimization of grain size and grain boundary (GB) characteristics. The focus will be on nanocrystalline austenitic Fe-Cr-Ni alloys with an fcc crystal structure. The long-term goal is to design and develop bulk nanostructured austenitic steels with enhanced void swelling resistance and substantial ductility, and to enhance their creep resistance at elevated temperatures via GB engineering. The combination of grain refinement and grain boundary engineering approaches allows us to tailor the material strength, ductility, and resistance to swelling by 1) changing the sink strength for point defects, 2) by increasing the nucleation barriers for bubble formation at GBs, and 3) by changing the precipitate distributions at boundaries. Compared to ferritic/martensitic steels, austenitic stainless steels (SS) possess good creep and fatigue resistance at elevated temperatures, and better toughness at low temperature. However, a major disadvantage of austenitic SS is that they are vulnerable to significant void swelling in nuclear reactors, especially at the temperatures and doses anticipated in the Advanced Burner Reactor. The lack of resistance to void swelling in austenitic alloys led to the switch to ferritic/martensitic steels as the preferred material for the fast reactor cladding application. Recently a type of austenitic stainless steel, HT-UPS, was developed at ORNL, and is expected to show enhanced void swelling resistance through the trapping of point defects at nanometersized carbides. Reducing the grain size and increasing the fraction of low energy grain boundaries should reduce the available radiation-produced point defects (due to the increased sink area of the grain boundaries), should make bubble nucleation at the boundaries less likely (by reducing the fraction of high-energy boundaries), and improve the strength and ductility under radiation by producing a higher density of nanometer sized carbides on the boundaries. This project will focus on void swelling but advances in processing of austenitic steels are likely to also improve the radiation response of the mechanical properties.

Xinghang Zhang; Hartwig, K. Ted; Todd Allen; Yong Yang

2012-10-27T23:59:59.000Z

408

Canister Transfer System Description Document  

SciTech Connect (OSTI)

The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane/hoist, DC loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the DC is fully loaded, the Disposal Container Transport System moves the DC to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister handling cell is located adjacent to the canister transfer cell and is interconnected to the transfer cell by means of the off-normal canister transfer tunnel. All canister transfer operations are controlled by the Control and Tracking System. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling Building System and other internal Waste Handling Building (WHB) support systems.

NONE

2000-10-12T23:59:59.000Z

409

CANISTER TRANSFER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane hoist, DC loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the DC is fully loaded, the Disposal Container Transport System moves the DC to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister handling cell is located adjacent to the canister transfer cell and is interconnected to the transfer cell by means of the off-normal canister transfer tunnel. All canister transfer operations are controlled by the Control and Tracking System. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling Building System and other internal Waste Handling Building (WHB) support systems.

B. Gorpani

2000-06-23T23:59:59.000Z

410

Technology Transfer Office FY2011 Annual Report  

E-Print Network [OSTI]

Technology Transfer Office FY2011 Annual Report #12;TECHNOLOGY TRANSFER ADVISORY COMMITTEES The UC San Diego Technology Transfer Advisory Committee (TTAC) is responsible for general oversight of the universityÃ? s technology transfer program. This standing committee is appointed by the chancellor

Hasty, Jeff

411

Technology Transfer office 2008 Annual Report  

E-Print Network [OSTI]

Technology Transfer office 2008 Annual Report #12;The UC San Diego Technology Transfer Advisory Committee (TTAC) is responsible for general oversight of the university's technology transfer program. It meets periodically to assess UC San Diego's technology transfer practices and guides the overall

Fainman, Yeshaiahu

412

Technology Transfer and Intellectual Property Services  

E-Print Network [OSTI]

Technology Transfer and Intellectual Property Services B I E N N I A L R E P O R T 03­04 #12;University of California, San Diego Technology Transfer Advisory Committee The UCSD Technology Transfer Advisory Committee (TTAC) is responsible for general oversight of the UCSD Technology Transfer Program

Fainman, Yeshaiahu

413

Effect of demagnetization on magnetic resonance line shapes in bulk samples: Application to tungsten  

Science Journals Connector (OSTI)

A calculation of the contribution of a bulk specimen's nonuniform demagnetizing field to the inhomogeneous broadening of magnetic resonance lines is described. Demagnetization effects are of particular importance for substances with large bulk magnetic susceptibilities located in large static magnetic fields. Application is made to the nuclear acoustic resonance of W183 spins in a bulk cylindrical specimen of tungsten. In addition to explaining the observed inhomogeneous line broadening, the calculation predicts a "satellite" line which is also observed experimentally. Although attention is paid to specifically acoustic considerations, the calculation is applicable to magnetic resonance in general.

George Mozurkewich; H. I. Ringermacher; D. I. Bolef

1979-07-01T23:59:59.000Z

414

Muon (g-2) from the bulk neutrino field in a warped extra dimensional model  

E-Print Network [OSTI]

In the Randall-Sundrum model, a bulk neutrino field in the 5-dimensional space-time can give rise to tiny Dirac masses to neutrinos. In such a scenario, we have computed the contribution of the bulk neutrino field to the anomalous magnetic moment $(g-2)_\\mu$ of muon. We have computed this contribution in the 't Hooft-Feynman gauge and have found that the contribution has the right sign to fit the current discrepancy between the experiment and the standard model value of $(g-2)_\\mu$. We have also studied possible constraints on the model parameters by including contributions to $(g-2)_\\mu$ from other sources such as bulk gravitons.

R. S. Hundi; Sourov Roy; Soumitra SenGupta

2012-06-22T23:59:59.000Z

415

Numerical simulation of supercritical heat transfer under severe axial density gradient in a narrow vertical tube  

SciTech Connect (OSTI)

A number of computational works have been performed so far for the simulation of heat transfer in a supercritical fluid. The simulations, however, faced a lot of difficulties when heat transfer deteriorates due either to buoyancy or by acceleration. When the bulk temperature approaches the pseudo-critical temperature the fluid experiences a severe axial density gradient on top of a severe radial one. Earlier numerical calculations showed, without exception, unrealistic over-predictions, as soon as the bulk temperature exceeded the pseudo-critical temperature. The over-predictions might have been resulted from an inapplicability of widely-used turbulence models. One of the major causes for the difficulties may probably be an assumption of a constant turbulent Prandtl number. Recent research, both numerical and experimental, indicates that the turbulent Prandtl number is never a constant when the gradient of physical properties is significant. This paper describes the applicability of a variable turbulent Prandtl number to the numerical simulation of heat transfer in supercritical fluids flowing in narrow vertical tubes. (authors)

Bae, Y. Y.; Hong, S. D.; Kim, Y. W. [Korea Atomic Energy Research Inst., 1045 Daedeokdaero, Daejeon (Korea, Republic of)

2012-07-01T23:59:59.000Z

416

Dynamical and Microphysical Evolution during Mixed-Phase Cloud Glaciation Simulated Using the Bulk Adaptive Habit Prediction Model  

Science Journals Connector (OSTI)

A bulk microphysics scheme predicting ice particle habit evolution has been implemented in the Weather Research and Forecasting Model. Large-eddy simulations are analyzed to study the effects of ice habit and number concentration on the bulk ice ...

Kara J. Sulia; Hugh Morrison; Jerry Y. Harrington

2014-11-01T23:59:59.000Z

417

Technology transfer | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology transfer Technology transfer Technology available for licensing: CURLSNovember 21, 2013 Containment Unidirectional Resource Loading System expands flexibility of glove boxes and other containment systems. Read more about Technology available for licensing: CURLS Rhodobacter System for the Expression of Membrane Proteins Using photosynthetic bacteria (Rhodobacter) for the expression of heterologous membrane proteins Read more about Rhodobacter System for the Expression of Membrane Proteins Synthesizing Membrane Proteins Using In Vitro Methodology This in vitro, cell-free expression system caters to the production of protein types that are challenging to study: membrane proteins, membrane-associated proteins, and soluble proteins that require complex redox cofactors.

418

RADIATIVE TRANSFER IN ULTRARELATIVISTIC OUTFLOWS  

SciTech Connect (OSTI)

Analytical and numerical solutions are obtained for the equation of radiative transfer in ultrarelativistic opaque jets. The solution describes the initial trapping of radiation, its adiabatic cooling, and the transition to transparency. Two opposite regimes are examined. (1) Matter-dominated outflow. Surprisingly, radiation develops enormous anisotropy in the fluid frame before decoupling from the fluid. The radiation is strongly polarized. (2) Radiation-dominated outflow. The transfer occurs as if radiation propagated in vacuum, preserving the angular distribution and the blackbody shape of the spectrum. The escaping radiation has a blackbody spectrum if (and only if) the outflow energy is dominated by radiation up to the photospheric radius.

Beloborodov, Andrei M., E-mail: amb@phys.columbia.edu [Physics Department and Columbia Astrophysics Laboratory, Columbia University, 538 West 120th Street New York, NY 10027 (United States)

2011-08-20T23:59:59.000Z

419

Technology Transfer award funding data* Figure 1. Current Technology Transfer awards  

E-Print Network [OSTI]

6 1 4 3 48 23 30 10 Technology Transfer award funding data* Figure 1. Current Technology Transfer awards Numbers represent active grants as at 1 October 2013 Figure 2. Technology Transfer award Transfer funding division. In the 2012/13 financial year Technology Transfer approved awards worth a total

Rambaut, Andrew

420

Journal of Heat Transfer1999 JHT Heat Transfer Gallery Department of Mechanical 8. Aerospace Engineering  

E-Print Network [OSTI]

Journal of Heat Transfer1999 JHT Heat Transfer Gallery S. M. You Department of Mechanical 8 Transfer Visualization Committee organized two photo gallery sessions in 1998. The International Heat Transfer Photo Gallery was held at the l la' International Heat Transfer Conference (IHTC) in Kyongju

Kihm, IconKenneth David

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Understanding Bulk Power Reliability: The Importance of Good Data and A Critical Review of Existing Sources  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Understanding Bulk Power Reliability: Understanding Bulk Power Reliability: The Importance of Good Data and A Critical Review of Existing Sources Emily Fisher Lawrence Berkeley National Laboratory esfisher@lbl.gov Joseph H. Eto Lawrence Berkeley National Laboratory jheto@lbl.gov Kristina Hamachi LaCommare Lawrence Berkeley National Laboratory kshamachi@lbl.gov Abstract Bulk power system reliability is of critical importance to the electricity sector. Complete and accurate information on events affecting the bulk power system is essential for assessing trends and efforts to maintain or improve reliability. Yet, current sources of this information were not designed with these uses in mind. They were designed, instead, to support real-time emergency notification to industry and government first-responders. This

422

Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted Resonator  

E-Print Network [OSTI]

Strontium Titanate DC Electric Field Switchable and Tunable Bulk Acoustic Wave Solidly Mounted Abstract - A voltage switchable/tunable strontium titanate solidly mounted BAW resonator was implemented films, piezoelectric resonators. I. INTRODUCTION Strontium titanate (STO) and barium strontium titanate

York, Robert A.

423

A new class of high ZT doped bulk nanothermoelectrics through bottom-up synthesis  

Broader source: Energy.gov [DOE]

Reports on synthesis of large quantities of p- and n-type nanocrystals then sintered into bulk samples with high power factors and low thermal conductivity through impurity doping and nanostructuring

424

Influence of organic salt concentration on the performance of bulk heterojunction organic solar cell  

Science Journals Connector (OSTI)

The effect of organic salt on the performance of bulk heterojunction organic solar cell was investigated by varying the concentration of...6). Organic solar cells based on TBAPF6-blended poly[2-methoxy-5-(2-ethyl...

Nasehah Syamin Sabri; Chi Chin Yap…

2013-07-01T23:59:59.000Z

425

Photovoltaics for Bulk Power Applications: Cost/Performance Targets and Technology Prospects  

Science Journals Connector (OSTI)

Photovoltaic (PV) power technology has shown steady progress over the past ten years toward its ultimate use in bulk — i.e., energy-significant — electric power applications, including demonstration of highly ...

Edgar A. DeMeo

1991-01-01T23:59:59.000Z

426

Bulk Migration of Ni/NiO in Ni-YSZ during Reducing Conditions...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

random grain orientation. The surface analysis and mapping were carried out using ToF-SIMS and AES whereas EDS maps on FIB sliced areas on Ni-YSZ were utilized for the bulk...

427

Correlation Between Structure and Thermoelectric Properties of Bulk High Performance Materials for Energy Conversion  

Broader source: Energy.gov [DOE]

Rapid solidified precursor converted into crystalline bulks under pressure produced thermoelectric materials of nano-sized grains with strongly coupled grain boundaries, achieving reduced lattice thermal conductivity and increased power factor

428

Evaluation of Residual Stresses in the Bulk of Materials by High Energy Synchrotron Diffraction  

Science Journals Connector (OSTI)

High energy synchrotron diffraction is introduced as a new ... for residual stress analysis in the bulk of materials. It is shown that energy dispersive measurements are sufficiently precise so that...?4...can be...

W. Reimers; M. Broda; G. Brusch; D. Dantz…

1998-09-01T23:59:59.000Z

429

Evaluation of residual stresses in the bulk of materials by high energy synchrotron diffraction  

Science Journals Connector (OSTI)

High energy synchrotron diffraction is introduced as a new ... for residual stress analysis in the bulk of materials. It is shown that energy dispersive measurements are sufficiently precise so that...?4...can be...

W. Reimers; M. Broda; G. Brusch; D. Dantz…

1998-09-01T23:59:59.000Z

430

Bulk power risk analysis : ranking infrastructure elements according to their risk significance  

E-Print Network [OSTI]

Disruptions in the bulk power grid can result in very diverse consequences that include economic, social, physical, and psychological impacts. In addition, power outages do not affect all end-users of the system in the ...

Koonce, Anthony M

2006-01-01T23:59:59.000Z

431

Nonequilibrium molecular dynamics simulations of confined fluids in contact with the bulk  

E-Print Network [OSTI]

Nonequilibrium molecular dynamics simulations of confined fluids in contact with the bulk Luzheng Zhang, Ramkumar Balasundaram,a) and Stevin H. Gehrke Department of Chemical Engineering, Kansas State University, Manhattan, Kansas 66506 Shaoyi Jiangb) Department of Chemical Engineering, University

Zhang, Luzheng

432

Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program  

Broader source: Energy.gov (indexed) [DOE]

Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Maximum Rebate $6,000 Program Info Funding Source New Hampshire Renewable Energy Fund (FY 2013) Start Date 04/14/2010 Expiration Date When progr State New Hampshire Program Type State Rebate Program Rebate Amount 30% Provider New Hampshire Public Utilities Commission The New Hampshire Public Utilities Commission (PUC) is offering rebates of 30% of the installed cost of qualifying new residential bulk-fed, wood-pellet central heating boilers or furnaces. The maximum rebate is $6,000. To qualify, systems must (1) become operational on or after May 1,

433

High-Energy, Low-Frequency Risk to the North American Bulk Power System  

Broader source: Energy.gov (indexed) [DOE]

High-Energy, Low-Frequency Risk to the North American Bulk Power High-Energy, Low-Frequency Risk to the North American Bulk Power System (June 2010) High-Energy, Low-Frequency Risk to the North American Bulk Power System (June 2010) A Jointly-Commissioned Summary Report of the North American Electric Reliability Corporation and the U.S. Department of Energy's November 2009 Workshop. The North American Electric Reliability Corporation (NERC) and the U.S. Department of Energy (DOE) partnered in July of 2009 on an effort to address High-Impact, Low-Frequency risks to the North American bulk power system. In August, NERC formed a steering committee made up of industry and risk experts to lead the development of an initial workshop on the subject, chaired by Scott Moore, VP Transmission System & Region Operations for American Electric Power, and Robert Stephan, Former Assistant Secretary for

434

E-Print Network 3.0 - al bulk crystals Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are homogeneously dispersed in the residual glass of the bulk for Tc... consists of titanite (CaTiSiO5) and anorthite (CaAl2Si2O8) crystals that have nucleated heterogeneously......

435

Using first principles Destiny Functional Theory methods to model the Seebeck coefficient of bulk silicon  

E-Print Network [OSTI]

Thermoelectrics are gaining significant amounts of attention considering their relevance today in the areas of sustainable energy generation and energy efficiency. In this thesis, the thermoelectric properties of bulk ...

Mehra, Saahil

2008-01-01T23:59:59.000Z

436

LM140/LM340A/LM340/LM7800C Series 3-Terminal Positive Regulators  

E-Print Network [OSTI]

LM140/LM340A/LM340/LM7800C Series 3-Terminal Positive Regulators General Description The LM140/LM340A/LM340/LM7800C monolithic 3-terminal positive voltage regulators employ internal current. The LM340A/LM340/LM7800C series is available in the TO-220 plastic power package, and the LM340

Wedeward, Kevin

437

Policies and Procedures for Creation, Review and Termination of Centers and Institutes  

E-Print Network [OSTI]

and Procedures have been adopted to provide a standard process for creating, review and terminating centersPolicies and Procedures for Creation, Review and Termination of Centers and Institutes March 3: The name of the new center or institute A mission statement and strategic plan, including a description

Escher, Christine

438

Econometric Modelling of World Oil Supplies: Terminal Price and the Time to Depletion  

E-Print Network [OSTI]

This paper develops a novel approach by which to identify the price of oil at the time of depletion; the so-called terminal price of oil. It is shown that while the terminal price is independent of both GDP growth and the price elasticity of energy...

Mohaddes, Kamiar

2012-03-02T23:59:59.000Z

439

Nutrient Management of Conservation-Till Cotton in Terminated-Wheat  

E-Print Network [OSTI]

Nutrient Management of Conservation- Till Cotton in Terminated-Wheat K.F. Bronson, J.W. Keeling, R, respectively. #12;A conservation-till cotton production system using wheat or rye winter cover, terminated (Lascano et al., 1994). Conservation-till cotton in the High Plains can be as productive as and more

Mukhtar, Saqib

440

Confirmed speakers include: THE GLOBAL ROLE OF VIRUSES IN BLOOM TERMINATION, BIODIVERSITY AND MARINE ECOLOGY  

E-Print Network [OSTI]

IN BLOOM TERMINATION, BIODIVERSITY AND MARINE ECOLOGY GUNNAR BRATBAK ­ University of Bergen, NorwayConfirmed speakers include: THE GLOBAL ROLE OF VIRUSES IN BLOOM TERMINATION, BIODIVERSITY AND MARINE ECOLOGY GUNNAR BRATBAK ­ University of Bergen, Norway COLLECTION, PROCESSING AND PRESERVATION

Wilhelm, Steven W.

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Optimal Design of Remote Terminal Unit (RTU) for Wireless SCADA System for Energy Management  

Science Journals Connector (OSTI)

For energy deficit countries, the design of Supervisory Control and Data Acquisition (SCADA) based energy management systems for optimal distribution is of high interest. Such design involves development of Remote Terminal Unit (RTU) which is considered ... Keywords: Field Programmable Gate Array (FPGA), Programmable Logic Controller (PLC), Remote Terminal Unit (RTU), Supervisory Control and Data Acquisition (SCADA), Tele-Control Interface (TCI), Wireless Communication

Muhammad Aamir; Javier Poncela; Muhammad Aslam Uqaili; B. S. Chowdhry; Nishat Ahmad Khan

2013-04-01T23:59:59.000Z

442

Vehicle Dispatching Problem at the Container Terminal with Tandem Lift Quay Cranes  

E-Print Network [OSTI]

, the tandem lift operations bring new challenges to the vehicle dispatching at terminals and this has become a big issue in the application of tandem lift QCs. The vehicle dispatching at terminals is to enhance the QCs’ productivities by coordinating the QCs...

Xing, Yao

2013-07-09T23:59:59.000Z

443

Small-Angle Neutron Scattering Studies of Charged Carboxyl-Terminated Dendrimers in Solutions  

E-Print Network [OSTI]

Small-Angle Neutron Scattering Studies of Charged Carboxyl-Terminated Dendrimers in Solutions Q. R-angle neutron scattering was used to characterize the solution behavior of charged carboxylic acid terminated- copy,16 small-angle X-ray scattering,17 and small-angle neutron scattering (SANS),18-25 have been used

Dubin, Paul D.

444

A two-stage supply chain DEA model for measuring container-terminal efficiency  

Science Journals Connector (OSTI)

Despite the growing amount of research into container-port operations and efficiency, much of the literature on the subject treats container ports and terminals as black box systems without examining the structure of their transformation and production processes. Research on the network and multi-stage structure of container-terminal operating systems is scarce and its applications in the context of port performance and benchmarking are even scarcer. In this paper, we argue that the container terminal production would be best modelled as a network of interrelated sub-processes and operating sites and develop a supply chain DEA model aimed at capturing the transformational process within the container-terminal system and across its sub-systems. We start by modelling container terminal operations as a container-flow process and analyse their site-specific and combined efficiency before formalising a two-stage supply chain DEA model to measure the efficiencies of both individual and network container terminal operations. Although, due to the unavailability of detailed operational data, this study is limited to container export flows only, the results provide further insight on the network structure of container-terminal operating systems and confirm the existence of disproportionate performances and efficiency levels between container-terminal operating sites and sub-processes.

Khalid Bichou

2011-01-01T23:59:59.000Z

445

Bulk and track etch properties of CR-39 SSNTD etched in NaOH/ethanol  

E-Print Network [OSTI]

Bulk and track etch properties of CR-39 SSNTD etched in NaOH/ethanol K.F. Chan, F.M.F. Ng, D. described the use of NaOH/ethanol as an etchant for the CR-39 detector, and have determined the corre and track etch properties of CR- 39 in NaOH/ethanol were derived from direct measurements. The bulk etch

Yu, K.N.

446

An analysis of bulk agricultural commodity buying behavior in selected developing economies  

E-Print Network [OSTI]

AN ANALYSIS OF BULK AGRICULTURAL COMMODITY BUYING BEHAVIOR IN SELECTED DEVELOPING ECONOMIES A Thesis by Kimberly Renee Moore Submitted to the Graduate College of Texas AAM University in partial fulfillment of the requirement for the degree... of MASTER OF SCIENCE May 1982 Major Subject: Agricultural Economics AN ANALYSIS OF BULK AGRICULTURAL COMMODITY BUYING BEHAVIOR IN SELECTED DEVELOPING ECONOMIES A Thesis by Kimberly Renee Moore Approved as to style and content by: ( i n o Committee...

Moore, Kimberly Renee

1982-01-01T23:59:59.000Z

447

EIS-0493: Corpus Christi LNG Terminal and Pipeline Project, Nueces and San  

Broader source: Energy.gov (indexed) [DOE]

3: Corpus Christi LNG Terminal and Pipeline Project, Nueces 3: Corpus Christi LNG Terminal and Pipeline Project, Nueces and San Patricio Counties, Texas EIS-0493: Corpus Christi LNG Terminal and Pipeline Project, Nueces and San Patricio Counties, Texas SUMMARY The Federal Energy Regulatory Commission (FERC) is preparing, with DOE as a cooperating agency, an EIS to analyze the potential environmental impacts of a proposal to construct and operate a liquefied natural gas export and import terminal on the north shore of Corpus Christi Bay in Nueces and San Patricio Counties, Texas; a marine berth connecting the terminal to the adjacent La Quinta Channel; and an approximately 23-mile-long natural gas transmission pipeline and associated facilities. In June 2012, FERC issued a notice of intent to prepare an EA; in October 2012, FERC announced that

448

V-204: A specially crafted query can cause BIND to terminate abnormally |  

Broader source: Energy.gov (indexed) [DOE]

V-204: A specially crafted query can cause BIND to terminate V-204: A specially crafted query can cause BIND to terminate abnormally V-204: A specially crafted query can cause BIND to terminate abnormally July 27, 2013 - 4:35am Addthis PROBLEM: A specially crafted query that includes malformed rdata can cause named to terminate with an assertion failure while rejecting the malformed query. PLATFORM: BIND 9.7 ABSTRACT: A specially crafted query sent to a BIND nameserver can cause it to crash (terminate abnormally). REFERENCE LINKS: ISC Knowledge Base CVE-2013-4854 IMPACT ASSESSMENT: High DISCUSSION: BIND is an implementation of the Domain Name System (DNS) protocols. Authoritative and recursive servers are equally vulnerable. Intentional exploitation of this condition can cause a denial of service in all nameservers running affected versions of BIND 9. Access Control Lists do

449

Vibration-Induced Conductivity Fluctuation Measurement for Soil Bulk Density Analysis  

E-Print Network [OSTI]

Soil bulk density affects water storage, water and nutrient movement, and plant root activity in the soil profile. Its measurement is difficult in field conditions. Vibration-induced conductivity fluctuation was investigated to quantify soil bulk density with possible field applications in the future. The AC electrical conductivity of soil was measured using a pair of blade-like electrodes while exposing the soil to periodic vibration. The blades were positioned longitudinally and transversally to the direction of the induced vibration to enable the calculation of a normalized index. The normalized index was expected to provide data independent from the vibration strength and to reduce the effect of soil salinity and water content. The experiment was conducted on natural and salinized fine sand at two moisture conditions and four bulk densities. The blade-shaped electrodes improved electrode-soil contact compared to cylindrical electrodes, and thereby, reduced measurement noise. Simulations on a simplified resistor lattice indicate that the transversal effect increases as soil bulk density decreases. Measurement of dry sand showed a negative correlation between the normalized conductivity fluctuation and soil bulk density for both longitudinal and transversal settings. The decrease in the transversal signal was smaller than expected. The wet natural and salinized soils performed very similarly as hypothesized, but their normalized VICOF response was not significant to bulk density changes.

Andrea Sz. Kishne; Cristine L. S. Morgan; Hung-Chih Chang; Laszlo B. Kish

2007-05-03T23:59:59.000Z

450

Submersible canned motor transfer pump  

DOE Patents [OSTI]

A transfer pump used in a waste tank for transferring high-level radioactive liquid waste from a waste tank and having a column assembly, a canned electric motor means, and an impeller assembly with an upper impeller and a lower impeller connected to a shaft of a rotor assembly. The column assembly locates a motor housing with the electric motor means adjacent to the impeller assembly which creates an hydraulic head, and which forces the liquid waste, into the motor housing to cool the electric motor means and to cool and/or lubricate the radial and thrust bearing assemblies. Hard-on-hard bearing surfaces of the bearing assemblies and a ring assembly between the upper impeller and electric motor means grind large particles in the liquid waste flow. Slots in the static bearing member of the radial bearing assemblies further grind down the solid waste particles so that only particles smaller than the clearances in the system can pass therethrough, thereby resisting damage to and the interruption of the operation of the transfer pump. The column assembly is modular so that sections can be easily assembled, disassembled and/or removed. A second embodiment employs a stator jacket which provides an alternate means for cooling the electric motor means and lubricating and/or cooling the bearing assemblies, and a third embodiment employs a variable level suction device which allows liquid waste to be drawn into the transfer pump from varying and discrete levels in the waste tank.

Guardiani, Richard F. (Ohio Township, Allegheny County, PA); Pollick, Richard D. (Sarver, PA); Nyilas, Charles P. (Monroeville, PA); Denmeade, Timothy J. (Lower Burrell, PA)

1997-01-01T23:59:59.000Z

451

Spring 2014 Heat Transfer -1  

E-Print Network [OSTI]

Spring 2014 1 Heat Transfer - 1 Consider a cylindrical nuclear fuel rod of length L and diameter df and the tube at a rate m , and the outer surface of the tube is well insulated. Heat generation occurs within. The specific heat of water pc , and the thermal conductivity of the fuel rod fk are constants. The system

Virginia Tech

452

Data Transfer | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Transfer Data Transfer The Blue Gene/P connects to other research institutions using a total of 20 GBs of public network connectivity. This allows scientists to transfer datasets to and from other institutions over fast research networks such as the Energy Science Network (ESNet) and the Metropolitan Research and Education Network (MREN). Data Transfer Node Overview Two data transfer nodes are available to all Intrepid users, that provide the ability to perform wide and local area data transfers. dtn01.intrepid.alcf.anl.gov (alias for gs1.intrepid.alcf.anl.gov) dtn02.intrepid.alcf.anl.gov (alias for gs2.intrepid.alcf.anl.gov) Data Transfer Utilities HSI/HTAR HSI and HTAR allow users to transfer data to and from HPSS Using HPSS on Intrepid GridFTP GridFTP provides the ability to transfer data between trusted sites such

453

Transfer Guide: Philosophy: General Philosophy Concentration Revised: 1 December 2009 TRANSFER GUIDE AND PLANNING WORKSHEET  

E-Print Network [OSTI]

Transfer Guide: Philosophy: General Philosophy Concentration Revised: 1 December 2009 TRANSFER Degree ­ Philosophy general philosophy concentration This planning worksheet represents a guide for community college students transferring to Colorado State University and majoring in Philosophy: general

454

ASSEMBLY TRANSFER SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The Assembly Transfer System (ATS) receives, cools, and opens rail and truck transportation casks from the Carrier/Cask Handling System (CCHS). The system unloads transportation casks consisting of bare Spent Nuclear Fuel (SNF) assemblies, single element canisters, and Dual Purpose Canisters (DPCs). For casks containing DPCs, the system opens the DPCs and unloads the SNF. The system stages the assemblies, transfer assemblies to and from fuel-blending inventory pools, loads them into Disposal Containers (DCs), temporarily seals and inerts the DC, decontaminates the DC and transfers it to the Disposal Container Handling System. The system also prepares empty casks and DPCs for off-site shipment. Two identical Assembly Transfer System lines are provided in the Waste Handling Building (WHB). Each line operates independently to handle the waste transfer throughput and to support maintenance operations. Each system line primarily consists of wet and dry handling areas. The wet handling area includes a cask transport system, cask and DPC preparation system, and a wet assembly handling system. The basket transport system forms the transition between the wet and dry handling areas. The dry handling area includes the dry assembly handling system, assembly drying system, DC preparation system, and DC transport system. Both the wet and dry handling areas are controlled by the control and tracking system. The system operating sequence begins with moving transportation casks to the cask preparation area. The cask preparation operations consist of cask cavity gas sampling, cask venting, cask cool-down, outer lid removal, and inner shield plug lifting fixture attachment. Casks containing bare SNF (no DPC) are filled with water and placed in the cask unloading pool. The inner shield plugs are removed underwater. For casks containing a DPC, the cask lid(s) is removed, and the DPC is penetrated, sampled, vented, and cooled. A DPC lifting fixture is attached and the cask is placed into the cask unloading pool. In the cask unloading pool the DPC is removed from the cask and placed in an overpack and the DPC lid is severed and removed. Assemblies are removed from either an open cask or DPC and loaded into assembly baskets positioned in the basket staging rack in the assembly unloading pool. A method called ''blending'' is utilized to load DCs with a heat output of less than 11.8 kW. This involves combining hotter and cooler assemblies from different baskets. Blending requires storing some of the hotter fuel assemblies in fuel-blending inventory pools until cooler assemblies are available. The assembly baskets are then transferred from the basket staging rack to the assembly handling cell and loaded into the assembly drying vessels. After drying, the assemblies are removed from the assembly drying vessels and loaded into a DC positioned below the DC load port. After installation of a DC inner lid and temporary sealing device, the DC is transferred to the DC decontamination cell where the top area of the DC, the DC lifting collar, and the DC inner lid and temporary sealing device are decontaminated, and the DC is evacuated and backfilled with inert gas to prevent prolonged clad exposure to air. The DC is then transferred to the Disposal Container Handling System for lid welding. In another cask preparation and decontamination area, lids are replaced on the empty transportation casks and DPC overpacks, the casks and DPC overpacks are decontaminated, inspected, and transferred to the Carrier/Cask Handling System for shipment off-site. All system equipment is designed to facilitate manual or remote operation, decontamination, and maintenance. The system interfaces with the Carrier/Cask Handling System for incoming and outgoing transportation casks and DPCs. The system also interfaces with the Disposal Container Handling System, which prepares the DC for loading and subsequently seals the loaded DC. The system support interfaces are the Waste Handling Building System and other internal WHB support systems.

B. Gorpani

2000-06-26T23:59:59.000Z

455

TECHNOLOGY LICENSE APPLICATION Office of Technology Transfer  

E-Print Network [OSTI]

Page 1 TECHNOLOGY LICENSE APPLICATION Office of Technology Transfer UT-Battelle, LLC (UT. One of the functions of UT-BATTELLE's Office of Technology Transfer is to negotiate license agreements

Pennycook, Steve

456

Technology Application Centers: Facilitating Technology Transfer  

E-Print Network [OSTI]

transfer plus technology application. A&C Enercom has learned from experience that technology deployment will not occur unless utilities achieve both technology transfer (e.g, the dissemination of information) and technology application (e.g., the direct...

Kuhel, G. J.

457

Revitalizing the Knowledge Capture & Transfer Program (KCTP)...  

Broader source: Energy.gov (indexed) [DOE]

Revitalizing the Knowledge Capture & Transfer Program (KCTP) Revitalizing the Knowledge Capture & Transfer Program (KCTP) March 4, 2014 - 12:15pm Addthis HC-20 is in the process of...

458

Heat Transfer through Strongly Magnetized Ferrofluids  

Science Journals Connector (OSTI)

8 April 1991 research-article Heat Transfer through Strongly Magnetized Ferrofluids P. J. Blennerhassett...under microgravity conditions, the ratio of the steady heat transfer by convection to that by conduction can be up to 10...

1991-01-01T23:59:59.000Z

459

HEAT AND MOISTURE TRANSFER THROUGH CLOTHING  

E-Print Network [OSTI]

J. & Cheng, X. -Y. 2005. Heat and moisture transfer withof the combined diffusion of heat and water vapor throughMathematical simulation of heat and moisture transfer in a

Voelker, Conrad; Hoffmann, Sabine; Kornadt, Oliver; Arens, Edward; Zhang, Hui; Huizenga, Charlie

2009-01-01T23:59:59.000Z

460

Phase-Transfer Catalysis: Fundamentals I  

Science Journals Connector (OSTI)

Critical to the success of phase-transfer catalytic (PTC) processes are (1) the maximization of the rate of transfer of reactant anions from the aqueous or solid phase to the organic phase, (2) the maximizatio...

Charles M. Starks; Charles L. Liotta; Marc E. Halpern

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

NREL: Technology Transfer - Research Facilities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research Facilities Research Facilities Photo of Solar Energy Research Facility building at NREL. NREL's Solar Energy Research Facility is one of many world-class facilities available to public and private agencies. For developing commercially viable energy products, organizations may partner with NREL to use our state-of-the-art laboratories, and testing and user facilities. Visit NREL's Research Facilities Web site to learn more about them. We typically develop technology partnership agreements for using our facilities and/or working with our researchers. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Licensing Agreements Nondisclosure Agreements Research Facilities Commercialization Programs Success Stories News Contacts Did you find what you needed?

462

Information transfer at multiple scales  

Science Journals Connector (OSTI)

In the study of complex systems a fundamental issue is the mapping of the networks of interaction between constituent subsystems of a complex system or between multiple complex systems. Such networks define the web of dependencies and patterns of continuous and dynamic coupling between the system’s elements characterized by directed flow of information spanning multiple spatial and temporal scales. Here, we propose a wavelet-based extension of transfer entropy to measure directional transfer of information between coupled systems at multiple time scales and demonstrate its effectiveness by studying (a) three artificial maps, (b) physiological recordings, and (c) the time series recorded from a chaos-controlled simulated robot. Limitations and potential extensions of the proposed method are discussed.

Max Lungarella; Alex Pitti; Yasuo Kuniyoshi

2007-11-27T23:59:59.000Z

463

State Transfer and Spin Measurement  

E-Print Network [OSTI]

We present a Hamiltonian that can be used for amplifying the signal from a quantum state, enabling the measurement of a macroscopic observable to determine the state of a single spin. We prove a general mapping between this Hamiltonian and an exchange Hamiltonian for arbitrary coupling strengths and local magnetic fields. This facilitates the use of existing schemes for perfect state transfer to give perfect amplification. We further prove a link between the evolution of this fixed Hamiltonian and classical Cellular Automata, thereby unifying previous approaches to this amplification task. Finally, we show how to use the new Hamiltonian for perfect state transfer in the, to date, unique scenario where total spin is not conserved during the evolution, and demonstrate that this yields a significantly different response in the presence of decoherence.

A. Kay

2006-04-21T23:59:59.000Z

464

Monitoring Environmental Recovery at Terminated Produced Water Discharge Sites in Coastal Louisiana Waters  

SciTech Connect (OSTI)

This report presents the results of a study of terminated produced water discharge sites in the coastal waters of Louisiana. Environmental recovery at the sites is documented by comparing pre-termination and post-termination (six months and one year) data. Produced water, sediments, and sediment interstitial water samples were analyzed for radionuclides, metals, and hydrocarbons. Benthic infauna were identified from samples collected in the vicinity of the discharge and reference sites. Radium isotope activities were determined in fish and crustacean samples. In addition, an environmental risk assessment is made on the basis of the concentrations of metals and hydrocarbons determined in the samples.

Continental Shelf Associates, Inc.

1999-08-16T23:59:59.000Z

465

Awards recognize outstanding innovation in Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

recognize outstanding innovation Awards recognize outstanding innovation in Technology Transfer The award honors inventors whose patented invention exhibits significant...

466

Waste Feed Delivery Transfer System Analysis  

SciTech Connect (OSTI)

This document provides a documented basis for the required design pressure rating and pump pressure capacity of the Hanford Site waste-transfer system in support of the waste feed delivery to the privatization contractor for vitrification. The scope of the analysis includes the 200 East Area double-shell tank waste transfer pipeline system and the associated transfer system pumps for a11 Phase 1B and Phase 2 waste transfers from AN, AP, AW, AY, and A2 Tank Farms.

JULYK, L.J.

2000-05-05T23:59:59.000Z

467

Idaho Administrator's Memorandum on Transfer Processing Policies...  

Open Energy Info (EERE)

Administrator's Memorandum on Transfer Processing Policies and Procedures Author Idaho Water Management Division Administrator Recipient Water Management Division Published...

468

Soft magnetic composites manufactured by warm co-extrusion of bulk metallic glass and steel powders  

SciTech Connect (OSTI)

Soft magnetic composites of Fe-based bulk metallic glass and low-alloy steel have been manufactured by warm co-extrusion of precursor powders at temperatures within the supercooled liquid region of the glass. Composites were manufactured with amorphous volume fractions of 75%, 67%, and 100%. Full consolidation of the constituent powders was observed with the bulk metallic glass remaining substantially amorphous. The composite electrical resistivity was observed to be anisotropic with a resistivity of 79 {mu}{Omega} cm measured transverse to the extrusion axis in a sample with 75% amorphous volume fraction. A 0-3 connectivity pattern with the low-resistivity steel phase embedded in a 3-dimensionally connected high-resistivity bulk metallic glass phase was observed with scanning electron microscopy. This confirms that the flow characteristics of the bulk metallic glass and the steel powders were comparable during extrusion at these temperatures. The saturation magnetization of 1.3 T was consistent with the volume weighted average of the saturation magnetization of the two phases. A relatively high quasistatic coercivity of 8 Oe was measured and is likely due to slight crystallization of the bulk metallic glass as well as domain wall pinning at prior particle boundaries. Careful control of the thermal environment during the extrusion process is required to minimize glass crystallization and achieve the desired balance of magnetic and electrical properties.

Johnson, Francis; Raber, Thomas R.; Zabala, Robert J.; Buresh, Steve J.; Tanico, Brian [GE Global Research, Ceramic and Metallurgy Technologies, One Research Circle, Niskayuna, New York 12309 (United States)

2013-05-07T23:59:59.000Z

469

Understanding Bulk Power Reliability: The Importance of Good Data and A  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Understanding Bulk Power Reliability: The Importance of Good Data and A Understanding Bulk Power Reliability: The Importance of Good Data and A Critical Review of Existing Sources Title Understanding Bulk Power Reliability: The Importance of Good Data and A Critical Review of Existing Sources Publication Type Report Year of Publication 2012 Authors Fisher, Emily, Joseph H. Eto, and Kristina Hamachi LaCommare Pagination 11 Date Published 01/2012 Publisher LBNL City Berkeley Keywords electricity markets and policy group, energy analysis and environmental impacts department, power system reliability, power system reliability metrics, transmission system reliability Abstract Bulk power system reliability is of critical importance to the electricity sector. Complete and accurate information on events affecting the bulk power system is essential for assessing trends and efforts to maintain or improve reliability. Yet, current sources of this information were not designed with these uses in mind. They were designed, instead, to support real-time emergency notification to industry and government first-responders. This paper reviews information currently collected by both industry and government sources for this purpose and assesses factors that might affect their usefulness in supporting the academic literature that has relied upon them to draw conclusions about the reliability of the US electric power system.

470

Spin-out Company Portfolio Technology Transfer  

E-Print Network [OSTI]

Spin-out Company Portfolio 2012 Technology Transfer The Sir Colin Campbell Building The University `Entrepreneurial University of the Year' in 2008. The Technology Transfer Office (TTO) has close links detail. Dr Susan Huxtable Director, Technology Transfer Tel: +44 (0)115 84 66388 Email: susan

Aickelin, Uwe

471

Technology Transfer and Intellectual Property Services  

E-Print Network [OSTI]

Technology Transfer and Intellectual Property Services 2005 A n n u a l R e p o r t #12;The UCSD Technology Transfer Advisory Committee (TTAC) is responsible for general oversight of the UCSD Technology chancellor of Research. It meets periodically to assess UCSD technology transfer policy and guide

Fainman, Yeshaiahu

472

Frequently Asked Questions 1. Technology Transfer  

E-Print Network [OSTI]

Frequently Asked Questions 1. Technology Transfer 2. Patent 3. Requirements for obtaining a patent is not addressed, please contact Colleen Michael at 631-344 -4919. #12;What is Technology Transfer? Technology Transfer is the process of developing practical applications for the results of scientific research

473

Bidirectional Technology Transfer: Sabbaticals in Industry  

E-Print Network [OSTI]

Bidirectional Technology Transfer: Sabbaticals in Industry Mark D. Hill University of Wisconsin---not just technology transfer---through a ten­month sabbatical in an industrial product group. I advocate product group. The next sections discuss technology transfer, my recent sabbatical, and conclude

Hill, Mark D.

474

Requirements Engineering Technology Transfer: An Experience Report  

E-Print Network [OSTI]

Requirements Engineering Technology Transfer: An Experience Report Francisco A. C. Pinheiro1 Julio of software engineering technology transfer was identified by Pfleeger (1999). She came to the con- clusion Journal of Technology Transfer, 28, 159­165, 2003 ©2003 Kluwer Academic Publishers. Manufactured

Leite, Julio Cesar Sampaio do Prado

475

Technology Transfer at Penn State University  

E-Print Network [OSTI]

Technology Transfer at Penn State University An Inventor's Guide to #12;Our mission is to protect on the University of Michigan's "Inventor's Guide to Technology Transfer," with adaptation for Penn State, and the staff of the UM Office of Technology Transfer for their kind permission to use their excellent material

Lee, Dongwon

476

Summary Report on Federal Laboratory Technology Transfer  

E-Print Network [OSTI]

Summary Report on Federal Laboratory Technology Transfer FY 2003 Activity Metrics and Outcomes 2004 Report to the President and the Congress under the Technology Transfer and Commercialization Act Office Chapter 2. Trends in Federal Lab Technology Transfer 2.1 Cooperative Research and Development

Perkins, Richard A.

477

An Inventor's Guide to Technology Transfer  

E-Print Network [OSTI]

An Inventor's Guide to Technology Transfer at the Massachusetts Institute of Technology on the University of Michigan's "Inventor's Guide to Technology Transfer," with adaptations for MIT and the MIT of Technology Transfer for their kind permission to use their excellent material and to the University

Reuter, Martin

478

Technology Transfer from the University of Oxford  

E-Print Network [OSTI]

Technology Transfer from the University of Oxford www.isis-innovation.com #12;Isis Innovation Ltd Oxford Technology Transfer IP, Patents, Licences, Spin-outs, Material Sales, Seed Funds, Isis Angels Network Oxford Expertise Consulting, Services Isis Consulting Business Technology Transfer and Innovation

Paxton, Anthony T.

479

Research and Technology Transfer Faculty Conference  

E-Print Network [OSTI]

Research and Technology Transfer Faculty Conference August 18th 2014 Bruce D. Honeyman Office of the VPRTT #12;Role of the Office of the Vice President for Research and Technology Transfer · `The role Poate. · Support Mines' Strategic Plan Office of the Vice President of Research and Technology Transfer

480

Trinity Technology Transfer News December 2012  

E-Print Network [OSTI]

Trinity Technology Transfer News December 2012 SRS was set up by Dr Paul Sutton and Prof Linda licensing fees. Dr. Margaret Woods | Technology Transfer Manager mjwoods@tcd.ie Ms. Audrey Crosbie;Trinity Technology Transfer News December 2012 Trinity Campus Company Funding Round EmpowerTheUser (www

O'Mahony, Donal E.

Note: This page contains sample records for the topic "bulk transfer terminal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network [OSTI]

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division of asphalt pavements. TECHNOLOGY TRANSFER PROGRAM JULY 2010, VOL. 2, NO. 1 Warm Mix Asphalt Hits the Road, and California LTAP Field Engineer, Technology Transfer Program, Institute of Transportation Studies, UC Berkeley

California at Berkeley, University of

482

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network [OSTI]

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division solve the very serious problem of waste tire disposal. TECHNOLOGY TRANSFER PROGRAM SEPTEMBER 2009, VOL, University of California Pavement Research Center, and California LTAP Field Engineer, Technology Transfer

California at Berkeley, University of

483

Heat Transfer at Small Grashof Numbers  

Science Journals Connector (OSTI)

...January 1957 research-article Heat Transfer at Small Grashof Numbers J. J...physical arguments suggest that the heat transfer from a body, immersed in a fluid...the problem is small. However, heat-transfer rates predicted in this fashion...

1957-01-01T23:59:59.000Z

484

ME 519: THEORY OF HEAT TRANSFER Instructor  

E-Print Network [OSTI]

ME 519: THEORY OF HEAT TRANSFER Fall 2014 Instructor: Class time: Classroom: Office Hours: Prof Tuesday 4­5pm or by appointment Class description This course will cover the fundamentals of heat transfer. An introductory course in heat transfer (ME 419 or equivalent) is pre-requisite. Grading 20% Homework 25% Exam 1

Lin, Xi

485

THE UNLV FOUNDATION MONETARY TRANSFER FORM  

E-Print Network [OSTI]

THE UNLV FOUNDATION MONETARY TRANSFER FORM (Use one form for each account) Date Department Amount Transfer from Foundation Account Name UNLV Foundation Foundation Account Number Transfer to University contributions to this fund were accepted. If Foundation account number does not equal BOR account number

Walker, Lawrence R.

486

2014-08-28 Issuance: Energy Conservation Standards for Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps; Notice of Proposed Rulemaking and Public Meeting  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register notice of proposed rulemaking and public meeting regarding energy conservation standards for packaged terminal air conditioners and packaged terminal heat pumps, as issued by the Assistant Secretary for Energy Efficiency and Renewable Energy on August 28, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

487

Cost Transfers Involving Sponsored Projects Directives and Procedures  

E-Print Network [OSTI]

Cost Transfers Involving Sponsored Projects Directives and Procedures Responsible Office: Office....................................................................................................................2 1.3 Cost Transfer..................................................................................................................................................2 4. Documentation of Cost Transfers

Jawitz, James W.

488

Policy_Statement_on_Technology_Transfer.pdf | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

PolicyStatementonTechnologyTransfer.pdf PolicyStatementonTechnologyTransfer.pdf PolicyStatementonTechnologyTransfer.pdf More Documents & Publications...

489

Climate Change: A Challenge to the Means of Technology Transfer  

E-Print Network [OSTI]

TO THE MEANS OF TECHNOLOGY TRANSFER Gordon J. MacDonaldthe importance of technology transfer in dealing withthe discussion of technology transfer has centered on

MacDonald, Gordon J. F.

1992-01-01T23:59:59.000Z

490

TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 PDF | Department...  

Broader source: Energy.gov (indexed) [DOE]

TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 PDF TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 PDF TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 PDF TECHNOLOGY...

491

Intellectual Property Protection and Technology Transfer: Evidence From US Multinationals  

E-Print Network [OSTI]

International Technology Transfer? Empirical Evidence FromProtection and Technology Transfer: Evidence from USProperty Protection and Technology Transfer Evidence from US

Kanwar, Sunil

2007-01-01T23:59:59.000Z

492

Radiative Heat Transfer in Enhanced Hydrogen Outgassing of Glass  

E-Print Network [OSTI]

Kaviany and B.P. Singh, “Radiative heat transfer in porousmedia”, Advances in Heat Transfer, vol. 23, no. 23, pp. 133–Thermal radiation heat transfer, Hemisphere Publishing Co. ,

Kitamura, Rei; Pilon, Laurent

2009-01-01T23:59:59.000Z

493

Guidance for Preparing Annual Agency Technology Transfer Reports Under the Technology Transfer Commercialization Act  

E-Print Network [OSTI]

Guidance for Preparing Annual Agency Technology Transfer Reports Under the Technology Transfer U.S. Department of Commerce in conjunction with The Interagency Working Group on Technology Transfer May 2013 #12;2 Introduction Under the Technology Transfer Commercialization Act of 2000 (P.L. 106

494

M. Bahrami ENSC 388 (F09) Forced Convection Heat Transfer 1 Forced Convection Heat Transfer  

E-Print Network [OSTI]

1 Forced Convection Heat Transfer Convection is the mechanism of heat transfer through a fluid / The convective heat transfer coefficient h strongly depends on the fluid properties and roughness of the solid. As a result, the heat transfer from the solid surface to the fluid layer adjacent to the surface

Bahrami, Majid

495

Heat Transfer Research, 2010, Vol. 41, No. 6 Turbine Aero-Heat Transfer Studies  

E-Print Network [OSTI]

AU TH O R PR O O F Heat Transfer Research, 2010, Vol. 41, No. 6 Turbine Aero-Heat Transfer Studies in Rotating Research Facilities CENGIZ CAMCI Turbomachinery Aero-Heat Transfer Laboratory, Department The present paper deals with the experimental aero-heat transfer studies performed in rotating turbine

Camci, Cengiz

496

Labor/Tuition Cost Transfers Involving Sponsored Funds Labor Cost Transfer (Attach Labor Redistribution Worksheet)  

E-Print Network [OSTI]

Labor/Tuition Cost Transfers Involving Sponsored Funds Labor Cost Transfer (Attach Labor Redistribution Worksheet) Tuition Cost Transfer Greater Than 90 days or Cross Semesters (Attach BRIO Query) Date state that all cost transfers should be requested within 90 days of the original expenditure

Salama, Khaled

497

Ion flow and momentum transfer in the Venus plasma environment  

Science Journals Connector (OSTI)

An analysis of ion data from 390 Venus Express, VEX, orbits demonstrates that the flow of solar wind- and ionospheric ions near Venus is characterized by a marked asymmetry. The flow asymmetry of solar wind H+ and ionospheric O+ points steadily in the opposite direction to the planet’s orbital motion, and is most pronounced near the Pole and in the tail/nightside region. The flow asymmetry is consistent with aberration forcing, here defined as lateral forcing induced by the planet’s orbital motion. In addition to solar wind forcing by the radial solar wind expansion, Venus is also subject a lateral/aberration forcing induced by the planet’s orbital motion transverse to the solar wind flow. The ionospheric response to lateral solar wind forcing is analyzed from altitude profiles of the ion density, ion velocity and ion mass-flux. The close connection between decreasing solar wind H+ mass-flux and increasing ionospheric O+ mass-flux, is suggestive of a direct/local solar wind energy and momentum transfer to ionospheric plasma. The bulk O+ ion flow is accelerated to velocities less than 10 km/s inside the dayside/flank Ionopause, and up to 6000 km in the tail. Consequently, the bulk O+ outflow does not escape, but remains near Venus as a fast (km/s) O+ zonal wind in the Venus polar and nightside upper ionosphere. Furthermore, the total O+ mass-flux in the Venus induced magnetosphere, increases steadily downward to a maximum of 2 × 10?14 kg/(m2 s) at ?400 km altitude, suggesting a downward transport of energy and momentum. The O+, and total mass-flux, decay rapidly below 400 km. With no other plasma mass-flux as replacement, we argue that the reduction of ion mass-flux is caused by ion-neutral drag, a transfer of ion energy and momentum to neutrals, implying that the O+ plasma wind is converted to a neutral (thermosphere) wind at Venus. Incidentally, such a neutral wind would go in the same direction as the Venus atmosphere superrotation.

R. Lundin; S. Barabash; Y. Futaana; J.-A. Sauvaud; A. Fedorov; H. Perez-de-Tejada

2011-01-01T23:59:59.000Z

498

Summary - Demonstration Bulk Vitrification System (DBVS) for Low-Actvity Waste at Hanford  

Broader source: Energy.gov (indexed) [DOE]

DBVS DBVS ETR Report Date: September 2006 ETR-3 United States Department of Energy Office of Environmental Management (DOE-EM) External Technical Review of the Demonstration Bulk Vitrification System (DBVS) for Low Activity Waste (LAW) at Hanford Why DOE-EM Did This Review The Department of Energy (DOE) is charged with the safe retrieval, treatment and disposal of 53 million gallons of Hanford radioactive waste. The Waste Treatment Plant (WTP) is being designed to treat and vitrify the High Level Waste (HLW) fraction in 20-25 years. The WTP is undersized for vitrifying the LAW fraction over the same time frame. The DOE is evaluating Bulk Vitrification as an alternative to increasing the size of the WTP LAW treatment process. Bulk vitrification is an in-container melting

499

Bulk Flows and End of the Dark Ages with the SKA  

E-Print Network [OSTI]

The early Universe is a precious probe of the birth of primordial objects, first star formation events and consequent production of photons and heavy elements. Higher-order corrections to the cosmological linear perturbation theory predicts the formation of coherent supersonic gaseous streaming motions at decoupling time. These bulk flows impact the gas cooling process and determine a cascade effect on the whole baryon evolution. By analytical estimates and N-body hydrodynamical chemistry numerical simulations including atomic and molecular evolution, gas cooling, star formation, feedback effects and metal spreading for individual species from different stellar populations according to the proper yields and lifetimes, we discuss the role of these primordial bulk flows at the end of the dark ages and their detectable impacts during the first Gyr in view of the upcoming SKA mission. Early bulk flows can inhibit molecular gas cooling capabilities, suppressing star formation, metal spreading and the abundance of ...

Maio, Umberto; Koopmans, Leon V E

2015-01-01T23:59:59.000Z

500

Sedimentation stacking diagram of binary colloidal mixtures and bulk phases in the plane of chemical potentials  

E-Print Network [OSTI]

We give a full account of a recently proposed theory that explicitly relates the bulk phase diagram of a binary colloidal mixture to its phase stacking phenomenology under gravity [Soft Matter 9, 8636 (2013)]. As we demonstrate, the full set of possible phase stacking sequences in sedimentation-diffusion equilibrium originates from straight lines (sedimentation paths) in the chemical potential representation of the bulk phase diagram. From the analysis of various standard topologies of bulk phase diagrams, we conclude that the corresponding sedimentation stacking diagrams can be very rich, even more so when finite sample height is taken into account. We apply the theory to obtain the stacking diagram of a mixture of nonadsorbing polymers and colloids. We also present a catalog of generic phase diagrams in the plane of chemical potentials in order to facilitate the practical application of our concept, which also generalizes to multi component mixtures.

Daniel de las Heras; Matthias Schmidt

2014-11-19T23:59:59.000Z