Powered by Deep Web Technologies
Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Retrofit Existing Buildings | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofit Existing Buildings Retrofit Existing Buildings Retrofit Existing Buildings Renovation, retrofit and refurbishment of existing buildings represent an opportunity to upgrade the energy performance of commercial building assets for their ongoing life. Often retrofit involves modifications to existing commercial buildings that may improve energy efficiency or decrease energy demand. In addition, retrofits are often used as opportune time to install distributed generation to a building. Energy efficiency retrofits can reduce the operational costs, particularly in older buildings, as well as help to attract tenants and gain a market edge. The Building Technologies Office provides resources that allow planners, designers, and owners to focus on energy-use goals from the first planning

2

New test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market.  

E-Print Network (OSTI)

building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team developed

3

Retrofit Existing Buildings | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofit Existing Buildings Retrofit Existing Buildings Retrofit Existing Buildings Photo of the Denver skyline with Wells Fargo Center building in the center of the image and the Rocky Mountains in the background. Renovation, retrofit and refurbishment of existing buildings represent an opportunity to upgrade the energy performance of commercial building assets for their ongoing life. Often retrofit involves modifications to existing commercial buildings that may improve energy efficiency or decrease energy demand. In addition, retrofits are often used as opportune time to install distributed generation to a building. Energy efficiency retrofits can reduce the operational costs, particularly in older buildings, as well as help to attract tenants and gain a market edge. The Building Technologies Office provides resources that allow planners,

4

Funding Opportunity Announcement State Energy Program (SEP) Strengthening Building Retrofit Markets and Stimulating Energy Efficiency Action  

NLE Websites -- All DOE Office Websites (Extended Search)

FINANCIAL ASSISTANCE FINANCIAL ASSISTANCE FUNDING OPPORTUNITY ANNOUNCEMENT U. S. Department of Energy National Energy Technology Laboratory State Energy Program (SEP) Strengthening Building Retrofit Markets and Stimulating Energy Efficiency Action DE-FOA-0000251 Announcement Type: Initial CFDA Number: 81.041 Issue Date: 04/09/2010 Application Due Date: 05/24/2010 11:59:59 PM Eastern Time 1 NOTE: REGISTRATION/SUBMISSION REQUIREMENTS Registration Requirements There are several one-time actions you must complete in order to submit an application in response to this Announcement (e.g., obtain a Dun and Bradstreet Data Universal Numbering System (DUNS) number, register with the Central Contractor Registration (CCR), and register with Grants.gov). Applicants who are not registered with CCR and Grants.gov, should allow at

5

Identification and evaluation of data sources for the commercial buildings retrofit market  

SciTech Connect

The objectives of this study are to identify data sources that provide information on current and future levels of commercial buildings retrofit activity in the US, and to evaluate the coverage these data sources provide the commercial retrofit industry. Data sources evaluated include reports, magazines, computerized data bases, and surveys. Relevant data sources were identified through a literature review and by telephone and mail contacts with building industry experts and trade associations. A brief summary of each of the data sources is provided and recommendations are made for gathering additional data to supplement the existing data source.

Smith, S.A.; Johnson, D.R.

1986-10-01T23:59:59.000Z

6

Building Technologies Office: Renovate and Retrofit Commercial Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Renovate and Retrofit Commercial Buildings for Energy Efficiency Renovate and Retrofit Commercial Buildings for Energy Efficiency Photo of the Denver skyline with Wells Fargo Center building in the center of the image and the Rocky Mountains in the background. A local law firm upgraded one floor of their offices in the Wells Fargo Center (center) in Denver as part of Commercial Building Partnerships. Renovation, retrofit and refurbishment of existing buildings represent an opportunity to upgrade the energy performance of commercial building assets for their ongoing life. Often retrofit involves modifications to existing commercial buildings that may improve energy efficiency or decrease energy demand. In addition, retrofits are often used as opportune time to install distributed generation to a building. Energy efficiency retrofits can reduce the operational costs, particularly in older buildings, as well as help to attract tenants and gain a market edge.

7

Approaching the retrofitting market successfully  

SciTech Connect

As a relatively new market, passive solar retrofitting must continue to gain public confidence and acceptance. Homeowners need the assurance that their solar investment is in the hands of a designer/builder who can successfully execute the design and construction. Credibility, through reputation and track record, is a quality that potential clients look for. Acquiring solar retrofit contracts requires a creative marketing approach by a qualified contractor. Various approaches to retrofit contracts are addressed.

Walsh, V.

1981-01-01T23:59:59.000Z

8

Business Case for Energy Efficient Building Retrofit and Renovation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SmartMarket Report Produced with support from Energy Efficient Business Case for Energy Efficient Building Retrofit and Renovation Funding provided by U.S. Department of Energy...

9

How Do We Retrofit the Tough Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Do We Retrofit the Tough Buildings? Do We Retrofit the Tough Buildings? Cape Cod Style and Masonry Ken Neuhauser, Building Science Corporation Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 2 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 3 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 4 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 5 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 6 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 7 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 8 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 9 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 10 Cape Cod Style Retrofitting the Tough Buildings 29 April 2013 11 Cape Cod Style - Knee Wall

10

Building Technologies Office: Advanced Energy Retrofit Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Energy Retrofit Guides to someone by E-mail Share Building Technologies Office: Advanced Energy Retrofit Guides on Facebook Tweet about Building Technologies Office: Advanced Energy Retrofit Guides on Twitter Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Google Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Delicious Rank Building Technologies Office: Advanced Energy Retrofit Guides on Digg Find More places to share Building Technologies Office: Advanced Energy Retrofit Guides on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score

11

Building Energy Retrofit Research: Multifamily Sector  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Retrofit Research: Multifamily Sector Title Building Energy Retrofit Research: Multifamily Sector Publication Type Report Year of Publication 1985 Authors Diamond,...

12

Building Energy Model Development for Retrofit Homes  

SciTech Connect

Based on previous research conducted by Pacific Northwest National Laboratory and Florida Solar Energy Center providing technical assistance to implement 22 deep energy retrofits across the nation, 6 homes were selected in Florida and Texas for detailed post-retrofit energy modeling to assess realized energy savings (Chandra et al, 2012). However, assessing realized savings can be difficult for some homes where pre-retrofit occupancy and energy performance are unknown. Initially, savings had been estimated using a HERS Index comparison for these homes. However, this does not account for confounding factors such as occupancy and weather. This research addresses a method to more reliably assess energy savings achieved in deep energy retrofits for which pre-retrofit utility bills or occupancy information in not available. A metered home, Riverdale, was selected as a test case for development of a modeling procedure to account occupancy and weather factors, potentially creating more accurate estimates of energy savings. This “true up” procedure was developed using Energy Gauge USA software and post-retrofit homeowner information and utility bills. The 12 step process adjusts the post-retrofit modeling results to correlate with post-retrofit utility bills and known occupancy information. The “trued” post retrofit model is then used to estimate pre-retrofit energy consumption by changing the building efficiency characteristics to reflect the pre-retrofit condition, but keeping all weather and occupancy-related factors the same. This creates a pre-retrofit model that is more comparable to the post-retrofit energy use profile and can improve energy savings estimates. For this test case, a home for which pre- and post- retrofit utility bills were available was selected for comparison and assessment of the accuracy of the “true up” procedure. Based on the current method, this procedure is quite time intensive. However, streamlined processing spreadsheets or incorporation into existing software tools would improve the efficiency of the process. Retrofit activity appears to be gaining market share, and this would be a potentially valuable capability with relevance to marketing, program management, and retrofit success metrics.

Chasar, David; McIlvaine, Janet; Blanchard, Jeremy; Widder, Sarah H.; Baechler, Michael C.

2012-09-30T23:59:59.000Z

13

Retrofit Ventilation Strategies in Multifamily Buildings Webinar  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Foundation Retrofits Foundation Retrofits Building America Webinar November 30, 2011 Kohta Ueno Hybrid Foundation Retrofits 2 Background Hybrid Foundation Retrofits 3 Background  Space conditioning energy use for basements  Known moisture-safe solutions (previous research)  Persistent bulk water (leakage) issues  Retrofits of existing foundations  Especially uneven wall (rubble stone) foundations  "Hybrid" insulation and bulk water control assemblies Hybrid Foundation Retrofits 4 Foundations w. bulk water issues  Severe and rapid damage to interior insulation and finishes due to bulk water intrusion Hybrid Foundation Retrofits 5 Insulation Location Choices * Retrofits: interior insulation is often the only

14

Monitoring conservative retrofits in single family buildings  

SciTech Connect

This study has provided detailed before-and-after information on the ambient and comfort conditions in nine single family buildings, and on the energy consumption of those buildings, for one or more energy conservation retrofits. The data were recorded in such a manner that as well as being able to determine the savings from the retrofits and the influence these retrofits have on the comfort conditions of the residence, the effects of the retrofits on time-of-day usage are also determinable. The following are included in appendices: a table of participant's names, site addresses and retrofit; significant dates and appropriate comments; a day of data and an annotated data set; pre-retrofit and post-retrofit audit data sheets; and usage history.

Richardson, C.S.

1992-12-06T23:59:59.000Z

15

Building Media, Inc. (Du Pont) (Building America Retrofit Alliance) | Open  

Open Energy Info (EERE)

Media, Inc. (Du Pont) (Building America Retrofit Alliance) Media, Inc. (Du Pont) (Building America Retrofit Alliance) Jump to: navigation, search Name Building Media, Inc. (Du Pont) (Building America Retrofit Alliance) Place Wilmington, DE Website http://www.prweb.com/releases/ References Building America Retrofit Alliance Press Release[1] BMI Website[2] DuPont Website[3] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Incubator Partnering Center within NREL Electricity Resources & Building Systems Integration LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Building Media, Inc. (Du Pont) (Building America Retrofit Alliance) is a company located in Wilmington, DE. References ↑ "Building America Retrofit Alliance Press Release" ↑ "BMI Website"

16

Building Technologies Office: Advanced Energy Retrofit Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Retrofit Guides Retrofit Guides Photo of the cover of the Advanced Energy Retrofit Guide for Healthcare Facilities. The Advanced Energy Retrofit Guides (AERGs) help building owners and managers as well as design and construction professionals plan, design, and implement energy efficiency upgrades in commercial buildings. The Advanced Energy Retrofit Guides (AERGs) were created to help decision makers plan, design, and implement energy improvement projects in their facilities. With energy managers in mind, they present practical guidance for kick-starting the process and maintaining momentum throughout the project life cycle. These guides are primarily reference documents, allowing energy managers to consult the particular sections that address the most pertinent topics.. Useful resources are also cited throughout the guides for further information. Each AERG is tailored specifically to the needs of a specific building type, with an emphasis on the most effective retro-commissioning and retrofit measures identified by experts familiar with those unique opportunities and challenges. The guides present a broad range of proven practices that can help energy managers take specific actions at any stage of the retrofit process, resulting in energy savings for many years to come.

17

Advanced Energy Retrofit Guide Office Buildings  

SciTech Connect

The Advanced Energy Retrofit Guide for Office Buildings is a component of the Department of Energy’s Advanced Energy Retrofit Guides for Existing Buildings series. The aim of the guides is to facilitate a rapid escalation in the number of energy efficiency projects in existing buildings and to enhance the quality and depth of those projects. By presenting general project planning guidance as well as financial payback metrics for the most common energy efficiency measures, these guides provide a practical roadmap to effectively planning and implementing performance improvements for existing buildings.

Liu, Guopeng; Liu, Bing; Wang, Weimin; Zhang, Jian; Athalye, Rahul A.; Moser, Dave; Crowe, Eliot; Bengtson, Nick; Effinger, Mark; Webster, Lia; Hatten, Mike

2011-09-27T23:59:59.000Z

18

Advanced Energy Retrofit Guide Retail Buildings  

Science Conference Proceedings (OSTI)

The Advanced Energy Retrofit Guide for Retail Buildings is a component of the Department of Energy’s Advanced Energy Retrofit Guides for Existing Buildings series. The aim of the guides is to facilitate a rapid escalation in the number of energy efficiency projects in existing buildings and to enhance the quality and depth of those projects. By presenting general project planning guidance as well as financial payback metrics for the most common energy efficiency measures, these guides provide a practical roadmap to effectively planning and implementing performance improvements for existing buildings.

Liu, Guopeng; Liu, Bing; Zhang, Jian; Wang, Weimin; Athalye, Rahul A.; Moser, Dave; Crowe, Eliot; Bengtson, Nick; Effinger, Mark; Webster, Lia; Hatten, Mike

2011-09-19T23:59:59.000Z

19

Grupe Homes Enters the Whole-House Retrofit Market  

Science Conference Proceedings (OSTI)

This article for HomeEnergy Magazine, a trade magazine on energy efficient home construction, retrofitting, remodeling, and research, describes retrofit projects by Grupe Homes of Sacramento, California, a production builder who has worked with DOE's Building America program on energy-efficient home demonstration projects. In this project, The article is a case study of Grupe's decision to enter the energy efficient remodeling market when new home sales lagged due to the economic slowdown starting in late 2007. The article also describes an energy-efficient retrofit of of a 22-year-old, 3-bedroom home in California’s Central Valley done in 2009 by Grupe. The home is Grupe's first retrofit and was done according to the criteria of Home Performance with ENERGY STAR, a national program from the EPA and DOE that promotes a comprehensive, whole-house approach to making energy-efficiency improvements. Grupe's staff were trained through the California Building Performance Contractors Association and passed the Building Performance Institute test to learn how to conduct extensive energy audits of existing houses as well to perform the energy efficient retrofits. In the retrofit home, they did extensive air sealing, replaced and added insulation, and replaced inefficient HVAC equipment and leaky can lights. They cut air leakage from 2478 to 1115 cfm 50, a 55% reduction. A Building America case study on this project was distributed at the EEBA (Energy and Environmental Building Alliance) Annual Conference in Denver, Colorado, Sept 28-30, 2009. The Home Energy article was published in the March/April 2010 issue.

Hefty, Marye G.; Gilbride, Theresa L.

2010-03-01T23:59:59.000Z

20

Ready to Retrofit: The Process of Project Team Selection, Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Ready to Retrofit: The Process of Project Team Selection, Building Ready to Retrofit: The Process of Project Team Selection, Building Benchmarking, and Financing Commercial Building Energy Retrofit Projects Title Ready to Retrofit: The Process of Project Team Selection, Building Benchmarking, and Financing Commercial Building Energy Retrofit Projects Publication Type Report LBNL Report Number LBNL-5893E Year of Publication 2012 Authors Sanders, Mark D., Kristen Parrish, and Paul A. Mathew Publisher LBNL Abstract This guide provides an introduction and overview to the retrofit process and then dives deeper into the key activities that an owner can influence most in the retrofit process: (1) Selecting Your Project Team, (2) Benchmarking Your Building, and (3) Financing Your Energy Efficiency Projects* Building Energy Retrofit Overview will provide you a simple explanation of the retrofit process, the project stages and the players involved.

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

A Methodology for Identifying Retrofit Energy Savings in Commercial Buildings  

E-Print Network (OSTI)

Measured energy savings resulting from energy conservation retrofits in commercial buildings can be used to verify the success of the retrofits, determine the payment schedule for the retrofits, and guide the selection of future retrofits. This paper presents a structured methodology, developed for buildings in the Texas LoanSTAR program, for measuring retrofit savings in commercial buildings. This methodology identifies the pre-retrofit construction and post-retrofit periods, normalizes energy consumption data, and quantifies the uncertainty associated with the measured savings. A case study from the Texas LoanSTAR program is presented as an example.

Kissock, K.; Reddy, A.; Claridge, D.

1992-05-01T23:59:59.000Z

22

Business Case for Energy Efficient Building Retrofit and Renovation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SmartMarket Report SmartMarket Report Produced with support from Energy Efficient Business Case for Energy Efficient Building Retrofit and Renovation Funding provided by U.S. Department of Energy through the Pacific Northwest National Laboratory McGraw-Hill Construction President Keith Fox Vice President, Product Development Kathryn E. Cassino McGraw-Hill Construction Research & Analytics/Alliances Vice President, Industry Insights & Alliances Harvey M. Bernstein, F. ASCE, LEED AP Senior Director, Research & Analytics Burleigh Morton Director, Partnerships & Alliances John Gudgel Director, Green Content & Research Communications Michele A. Russo, LEED AP Business Case for Energy Effi cient Building Retrofi

23

City of Los Angeles - Green Building Retrofit Requirement | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green Building Retrofit Requirement Green Building Retrofit Requirement City of Los Angeles - Green Building Retrofit Requirement < Back Eligibility Local Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Manufacturing Buying & Making Electricity Solar Water Heating Program Info State California Program Type Energy Standards for Public Buildings Provider Los Angeles Department of Water and Power In April 2009, Los Angeles enacted [clkrep.lacity.org/onlinedocs/2006/06-1963_ord_180633.pdf Ordinance 180636], known as the Green Building Retrofit Ordinance. This ordinance was later amended by Ordinance 182259. The law requires all city-owned

24

Retrofit of Existing Residential Building: a Case Study  

E-Print Network (OSTI)

There are about 42 billion square meters of existing buildings in China. The energy efficiency of existing buildings directly relates to the energy consumption of the building sector. The retrofit of existing residential building began in the 1990s in Heilongjiang. The Sino-Canada demonstration project and Sino-France demonstration project of retrofitting existing residential buildings were carried out in 1997 and 2004, respectively. The retrofit method and energy conservation potential of the envelope and heating system of northern existing buildings are analyzed in this paper, combining the experiences of retrofitting existing residential buildings in Heilongjiang. The software was compiled to aid the design of the envelope retrofit in Heilongjiang and to analyze the working situation in existing residential building heating systems. The imbalance of the indoor temperature and the quantity of heating loss from opening the window in different retrofit projects are presented. The emphasis on energy efficiency retrofit of the envelope of existing residential buildings should be placed on the wall in northern region. It is possible to reduce about 50 percent of energy consumption of buildings by insulating the wall. The external insulation is suitable for retrofitting existing buildings, and the moisture transfer should be considered at the same time. To insure actual reduction in energy consumption, the heating system should be retrofitted when the envelope is insulated.

Zhao, L.; Xu, W.; Li, L.; Gao, G.

2006-01-01T23:59:59.000Z

25

Energy Efficient Retrofits and Green Building Practices  

E-Print Network (OSTI)

According to the recent survey more and more concern being expressed throughout the Middle East regions that the power generation companies are suffering with shortage of power during the peek hours and consequently unable to meet the power demand. Moreover, the increase in demand is also causing rise in pollution levels. Therefore, the subject of energy efficient retrofits and green building practices is becoming increasingly important. Based on the latest walkthrough energy audit it is proven that 65% of electricity is consumed by Air Conditioning System resulting average energy consumption by 250kWh/year/sqmeter of a residential complex.

Rahman, M.

2010-01-01T23:59:59.000Z

26

Analysis of institutional mechanisms affecting residential and commercial buildings retrofit  

SciTech Connect

Barriers to energy conservation in the residential and commercial sectors influence (1) the willingness of building occupants to modify their energy usage habits, and (2) the willingness of building owners/occupants to upgrade the thermal characteristics of the structures within which they live or work and the appliances which they use. The barriers that influence the willingness of building owners/occupants to modify the thermal efficiency characteristics of building structures and heating/cooling systems are discussed. This focus is further narrowed to include only those barriers that impede modifications to existing buildings, i.e., energy conservation retrofit activity. Eight barriers selected for their suitability for Federal action in the residential and commercial sectors and examined are: fuel pricing policies that in the short term do not provide enough incentive to invest in energy conservation; high finance cost; inability to evaluate contractor performance; inability to evaluate retrofit products; lack of well-integrated or one-stop marketing systems (referred to as lack of delivery systems); lack of precise or customized information; lack of sociological/psychological incentives; and use of the first-cost decision criterion (expanded to include short-term payback criterion for the commercial sector). The impacts of these barriers on energy conservation are separately assessed for the residential and commercial sectors.

1980-09-01T23:59:59.000Z

27

Monitoring conservative retrofits in single family buildings. Final technical report  

SciTech Connect

This study has provided detailed before-and-after information on the ambient and comfort conditions in nine single family buildings, and on the energy consumption of those buildings, for one or more energy conservation retrofits. The data were recorded in such a manner that as well as being able to determine the savings from the retrofits and the influence these retrofits have on the comfort conditions of the residence, the effects of the retrofits on time-of-day usage are also determinable. The following are included in appendices: a table of participant`s names, site addresses and retrofit; significant dates and appropriate comments; a day of data and an annotated data set; pre-retrofit and post-retrofit audit data sheets; and usage history.

Richardson, C.S.

1992-12-06T23:59:59.000Z

28

The retrofitting of existing buildings for seismic criteria  

E-Print Network (OSTI)

This thesis describes the process for retrofitting a building for seismic criteria. It explains the need for a new, performance-based design code to provide a range of acceptable building behavior. It then outlines the ...

Besing, Christa, 1978-

2004-01-01T23:59:59.000Z

29

Retrofit of a Multifamily Mass Masonry Building in New England  

SciTech Connect

Merrimack Valley Habitat for Humanity (MVHfH) has partnered with Building Science Corporation to provide high performance affordable housing for 10 families in the retrofit of an existing brick building (a former convent) into condominiums. The research performed for this project provides information regarding advanced retrofit packages for multi-family masonry buildings in Cold climates. In particular, this project demonstrates safe, durable, and cost-effective solutions that will potentially benefit millions of multi-family brick buildings throughout the East Coast and Midwest (Cold climates). The retrofit packages provide insight on the opportunities for and constraints on retrofitting multifamily buildings with ambitious energy performance goals but a limited budget. The condominium conversion project will contribute to several areas of research on enclosures, space conditioning, and water heating. Enclosure items include insulation of mass masonry building on the interior, airtightness of these types of retrofits, multi-unit building compartmentalization, window selection, and roof insulation strategies. Mechanical system items include combined hydronic and space heating systems with hydronic distribution in small (low load) units, and ventilation system retrofits for multifamily buildings.

Ueno, K.; Kerrigan, P.; Wytrykowska, H.; Van Straaten, R.

2013-08-01T23:59:59.000Z

30

A Methodology to Measure Retrofit Energy Savings in Commercial Buildings  

E-Print Network (OSTI)

Measured energy savings promote and sustain energy conservation retrofits by verifying the success of retrofits, determining pay-back schedules, guiding the selection of future retrofits and identifying opportunities for further savings. This dissertation develops a methodology to measure retrofit energy savings and the uncertainty of the savings in commercial buildings. The functional forms of empirical models of cooling and heating energy use in commercial buildings are derived from an engineering analysis of constant-air-volume and variable-air-volume HVAC systems. One, two, three and four parameter, temperature-dependent regression models are proposed to model baseline energy use. Retrofit savings are measured as the difference between the baseline energy use project by the models and the measured post-retrofit energy use. A hybrid ordinary least squares/autoregressive method is developed to determine the uncertainty of the predicated energy use and savings. The annual predictive ability of models based on pre-retrofit data sets of less than a full year is investigated. The energy delivery efficiency is introduced to measure the efficiency of air-side systems at meeting the net building load. A preliminary investigation of the use of artificial neural network models to measure savings is presented. The methodology is demonstrated on case study examples using software specifically developed for the analysis of commercial building energy use.

Kissock, John Kelly

2008-01-16T23:59:59.000Z

31

Energy Innovation Hub Report Shows Philadelphia-area Building Retrofits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report Shows Philadelphia-area Building Report Shows Philadelphia-area Building Retrofits Could Support 23,500 Jobs Energy Innovation Hub Report Shows Philadelphia-area Building Retrofits Could Support 23,500 Jobs November 10, 2011 - 10:36am Addthis This is the Greater Philadelphia Innovation Cluster located at the Philadelphia Navy Yard, which has 270 buildings that consortium members can use to conduct energy efficiency experiments. The Energy Efficiency Buildings Hub is one of the U.S. Department of Energy’s research centers called Energy Innovation Hubs. | Photo courtesy of EEB Hub This is the Greater Philadelphia Innovation Cluster located at the Philadelphia Navy Yard, which has 270 buildings that consortium members can use to conduct energy efficiency experiments. The Energy Efficiency

32

DEVELOPMENT AND DEPLOYMENT OF ADVANCED EMISSION CONTROLS FOR THE RETROFIT MARKET  

DOE Green Energy (OSTI)

Bringing a diesel retrofit product to market involves two primary phases: development and deployment. Critical product development steps include technology selection, system integration, laboratory and durability testing, and regulatory agency verification work. This initial product development phase is then followed by a deployment phase, which consists of building and managing the infrastructure for installation, distribution, service, sales and warranty support. Building relationships with regulators and air quality program developers is also a critical aspect of the deployment process. A successful path to market requires close cooperation between developer, distributor, customer and regulator.

Edgar, B; Rumminger, M; Streichsbier, M

2003-08-24T23:59:59.000Z

33

Measuring retrofit savings in commercial buildings with pre-retrofit utility billing data and post-retrofit sub-metered data  

E-Print Network (OSTI)

Methodologies to measure energy and dollar savings resulting from energy conserving retrofits in commercial buildings when both pre-retrofit and post-retrofit monitored data are available at an hourly or daily level have already been developed by several researchers. However there are many occasions when hourly or daily energy consumption data are available only for the post-retrofit period. This thesis presents a methodology for measuring retrofit savings on such occasions by establishing a pre-retrofit baseline model of energy consumption based on pre-retrofit monthly utility billing data and sub-metered daily or hourly post-retrofit data. The procedure consists of two basic parts. The first part normalizes energy use for temperature dependency using post-retrofit sub-metered hourly data, the second part accounts for scheduling effects and develops a pre-retrofit baseline model using pre-retrofit utility bills. In this way, the method explicitly accounts for both scheduling and weather effects in developing a baseline for pre-retrofit energy consumption. The methodology is first tested with data from a LoanSTAR site where both pre- and post-retrofit data are available. It is then illustrated with two other LoanSTAR sites where only post-retrofit sub-metered data and pre-retrofit monthly utility billing data are available. This thesis also employs the direct utility bill comparison method to measure retrofit savings, and extends it to include a simple temperature comparison and compares results on a monthly and annual basis with the method developed herein.

Liu, Yue

1993-01-01T23:59:59.000Z

34

Retrofit Ventilation Strategies in Multifamily Buildings Webinar...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Slides from the Building America webinar on November 30, 2011. webinarhybridinsulation20111130.pdf...

35

Forrestal Building Lighting Retrofit Second Live Test Demonstration (LTD)  

SciTech Connect

This report describes and summarizes the Forrestal Building Lighting Retrofit Live Test demonstration (LTD) performed by Pacific Northwest Laboratory (PNL) in Room 5E-080 of the DOE Forrestal Building in Washington, D.C. The purpose of the LTD was to evaluate proposed lighting retrofits for compliance with the requirements laid out in the request for proposal (RFP) for the Shared Energy Savings (SES) Lighting Retrofit Project for the Forrestal Building, Washington, D.C. Testing was conducted from March 9 through March 18, 1992, and again on August 3 through August 6, 1992. Four contractors were initially tested in March. Then, two contractors were retested in August due to changes in the rebate schedule for electronic ballasts being offered by the Potomac Electric Power Company (PEPCO), the utility servicing the Forrestal Building. The two contractors tested in March were retested with different ballasts, tubes, and reflectors. The results from these new tests are reported here and compared with those from the earlier tests.

Halverson, M.A.; Schmelzer, J.R.; Parker, G.B.

1993-02-01T23:59:59.000Z

36

Combining Energy Efficiency Building Retrofits and Onsite Generation: An  

NLE Websites -- All DOE Office Websites (Extended Search)

Combining Energy Efficiency Building Retrofits and Onsite Generation: An Combining Energy Efficiency Building Retrofits and Onsite Generation: An Emerging Business Model from the ESCO Industry Title Combining Energy Efficiency Building Retrofits and Onsite Generation: An Emerging Business Model from the ESCO Industry Publication Type Conference Paper Year of Publication 2011 Authors Satchwell, Andrew, Peter H. Larsen, and Charles A. Goldman Conference Name 2011 ACEEE Summer Study on Energy Efficiency in Industry Date Published 2011 Publisher ACEEE Conference Location Niagara Falls, New York Abstract The U.S. energy service company (ESCO) industry is an example of a private-sector business model where energy efficiency savings are delivered to customers primarily through the use of performance-based contracts. Despite the onset of a severe economic recession, we estimate that the U.S. ESCO industry grew about 7% per year from 2006 to 2008 with annual revenues of about $4.1 billion in 2008. About 75% of industry revenues are directly related to the installation of energy efficiency measures at existing buildings in the institutional, commercial, and industrial sectors.

37

New Jersey SmartStart Buildings - New Construction and Retrofits |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » New Jersey SmartStart Buildings - New Construction and Retrofits New Jersey SmartStart Buildings - New Construction and Retrofits < Back Eligibility Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Manufacturing Other Construction Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate General: incentives may be limited to $500,000 per utility account per year. Custom Measures: limited to lesser of $0.16/kWh or $1.60/therm saved annually; 50% of total costs; or buydown to a 1-year payback period Program Info Funding Source New Jersey Societal Benefits Charge (public benefits fund)

38

Development of whole-building energy performance models as benchmarks for retrofit projects  

Science Conference Proceedings (OSTI)

This paper presents a systematic development process of whole-building energy models as performance benchmarks for retrofit projects. Statistical regression-based models and computational performance models are being used for retrofit projects in industry ...

Omer Tugrul Karaguzel; Khee Poh Lam

2011-12-01T23:59:59.000Z

39

The evaluation of retrofit measures in a tall residential building  

SciTech Connect

As part of a joint demonstration effort involving the US Department of Energy (DOE), the US Department of Housing and Urban Development (HUD), Boston Edison Company (BECo), and the Chelsea Housing Authority, Oak Ridge National Laboratory (ORNL) participated in the evaluation of energy and demand saving retrofits for a tall residential building located in Boston. The thirteen story all-electric building underwent window, lighting, and control renovations in December, 1992. annual energy consumption was reduced by 15% and peak demand fell by 17%. Hourly should building consumption data were available for the comparison of pre- and post- conditions and for calibration of a DOE-2.1D simulation model. The analysis found the window retrofit accounted for 90% of total energy savings and 95% of average demand savings, due to reductions in both conduction and infiltration. Benefits from lighting retrofits were low in cooling months and negligible in winter months due to the increase in the demand for electric resistance heating which was proportional to the reduction in lighting capacity. Finally, the simulation model verified that heating system controls had not been used as intended, and that the utility rate structure would not allow cost savings from the original control strategy. These results and other interesting lessons learned are presented.

Abraham, M.M.; McLain, H.A.

1995-07-01T23:59:59.000Z

40

An Overview of the Building Energy Retrofit Research Program  

E-Print Network (OSTI)

A relatively new program of the U.S. Department of Energy has been established to focus on the technical, financial, and behavioral barriers to improving the energy efficiency of existing buildings through retrofit. The program is organized by the three building sectors (single-family, multi-family, and commercial) and is implemented with expertise from four national laboratories, Princeton University, and the Alliance to Save Energy in cooperation with a large number of state, utility, and local agencies. This paper summarizes the objectives, approach, and accomplishments of the program.

Mixon, W. R.

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

An Overview of the Building Energy Retrofit Research Program  

E-Print Network (OSTI)

This research update presents the status of a U.S. Department of Energy program that addresses the technical, financial, and behavioral barriers to improving the energy efficiency of existing buildings. The program is implemented with expertise from four national laboratories, Princeton University, and the Alliance to Save Energy in cooperation with a large number of state, utility, and local agencies. The remaining potential for energy savings from cost effective retrofit measures in existing buildings is impressive, but a variety of barriers have been identified that reduce conservation investment. One significant barrier that the program can address is the large uncertainty about savings. Average savings for a large sample of retrofit hones is generally lower than expected, and savings in individual buildings varies unpredictably from negative to very high positive values. Our approach has been to provide reliable information on the performance and cost effectiveness of energy conserving technologies and practices. Field performance monitoring is in progress in each building sector and development of diagnostic techniques and monitoring protocols is in progress.

Mixon, W. R.

1988-01-01T23:59:59.000Z

42

Retrofitting existing commercial buildings in the desert southwest to be energy efficient.  

E-Print Network (OSTI)

??This research proposes recommendations specific to the desert southwest for retrofitting existing commercial buildings. A dry, arid region such as Las Vegas, Nevada must contend… (more)

Wilkins, Andrea Lee

2010-01-01T23:59:59.000Z

43

Hungary-Employment Impacts of a Large-Scale Deep Building Retrofit  

Open Energy Info (EERE)

Hungary-Employment Impacts of a Large-Scale Deep Building Retrofit Hungary-Employment Impacts of a Large-Scale Deep Building Retrofit Programme Jump to: navigation, search Name Hungary-Employment Impacts of a Large-Scale Deep Building Retrofit Programme Agency/Company /Organization European Climate Foundation Sector Energy Focus Area Energy Efficiency, Buildings, - Building Energy Efficiency Topics Co-benefits assessment, Background analysis Resource Type Publications Website http://3csep.ceu.hu/sites/defa Country Hungary UN Region Eastern Europe References Hungary-Employment Impacts of a Large-Scale Deep Building Retrofit Programme[1] Hungary-Employment Impacts of a Large-Scale Deep Building Retrofit Programme Screenshot "The goal of the present research was to gauge the net employment impacts of a largescale deep building energy-efficiency renovation programme in

44

Hammer Award Honors a Federal Building's Energy-Efficient Retrofit  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 Hammer Award Honors a Federal Building's Energy-Efficient Retrofit Figure 1: Each floor of the 21-story Phillip Burton Federal Office Building in San Francisco is more than 60,000 square feet. The lighting controls testbed occupies the third, fourth and fifth floors. Vice President Al Gore's National Performance Review has given a Hammer Award to a team of private and public entities, including several Center researchers. The team is working to turn San Francisco's Federal Building at 450 Golden Gate Avenue into a showcase of energy-efficient technologies that could cut the federal government's annual energy bill by a billion dollars. The Hammer Award recognizes teams of federal, state, and local employees and private citizens who have made government more efficient and

45

Evaluation of Retrofit Delivery Packages  

SciTech Connect

Residential energy retrofit activities are a critical component of efforts to increase energy efficiency in the U.S. building stock; however, retrofits account for a small percentage of aggregate energy savings at relatively high per unit costs. This report by Building America research team, Alliance for Residential Building Innovation (ARBI), describes barriers to widespread retrofits and evaluates opportunities to improve delivery of home retrofit measures by identifying economies of scale in marketing, energy assessments, and bulk purchasing through pilot programs in portions of Sonoma, Los Angeles, and San Joaquin Counties, CA. These targeted communities show potential and have revealed key strategies for program design, as outlined in the report.

Berman, M.; Smith, P.; Porse, E.

2013-07-01T23:59:59.000Z

46

Assessing methods for predicting retrofit energy savings in buildings : case study of a Norwegian school  

E-Print Network (OSTI)

This work investigates methods for predicting retrofit energy savings in existing Norwegian buildings. A case study is performed on a 30 year old primary school in Trondheim, Norway. The energy consumption in the school ...

Ricker, Elizabeth, S.M. (Elizabeth Ann). Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

47

Lighting retrofit monitoring for the Federal sector-strategies and results at the DOE Forrestal Building  

SciTech Connect

Pacific Northwest Laboratory (PNL), the US Department of Energy (DOE) Federal Energy Management Program (FEMP), and Potomac Electric Power Company (PEPCO) have been conducting short-term monitoring studies at the Forrestal Building, headquarters of the DOE, since 1990. These studies were an integral part of the Shared Energy Savings (SES) lighting retrofit project completed in 1993. The overall goal of the project was to reduce electricity consumption at the Forrestal Building. One objective of the project was to use the building as a model for other federal SES lighting retrofit efforts. A complete short-term monitoring strategy in support of the SES project was developed. The strategy included baseline measurements of electrical consumption, performance measurements of proposed retrofits, and post-retrofit measurements of electricity consumption. Measurements included power consumption, power harmonics, and lighting levels. The results show a 56% reduction in electrical power consumed for lighting, as well as improved power quality and increased lighting levels.

Halverson, M.A.; Schmelzer, J.R.; Keller, J.M.; Stoops, J.L.; Chvala, W.D.

1994-08-01T23:59:59.000Z

48

Study of Multifamily Energy Retrofit Using Flexible Multizone Building Simulation Model  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Study of Multifamily Study of Multifamily Energy Retrofit using Flexible, Multizone Building Simulation Model Piljae Im, Ph.D. Mini Malhotra, Ph.D. R&D Staff Oak Ridge National Laboratory Presented at Building America Technical Update Meeting April 29-30, 2013 Outline * Multifamily Energy Audit Tool - Background - Needs for MF Audit Tool - Existing MF Tools - Modeling Approach - Development Status * Case Study - Background - Pre/Post Retrofit Building characteristics - Whole Building Energy Analysis * Summary Managed by UT-Battelle for the U.S. Department of Energy Study of Multifamily Energy Retrofit using Flexible, Multizone Building Simulation Model 2 Background * New MF Building Energy Audit Tool sponsored by U.S. DOE * Collaboration of ORNL and LBNL * National web-based

49

Research on Commercial Patterns of China Existing Building Energy Retrofit Based on Energy Management Contract  

E-Print Network (OSTI)

Existing building energy retrofit is one of the keys of building energy efficiency in China. According to experience in developed countries, implementation of energy management contract (EMC) is crucial to promote existing building energy retrofit, which means that the reduction of energy expenditure is used to pay the retrofit cost. The EMC program has a short payback period, high interior return rate and remarkable energy savings. This paper present the specialties and difficulties of existing building energy conservation in China and the development, service items and commercial patterns of EMC. We discuss the main methods and ways that EMC is applied to existing building energy retrofit at the original stage of building energy efficiency by analyzing the difference of EMC and other traditional energy efficiency patterns. Based on the analysis of three commercial patterns of EMC including guaranteed savings contract, shared savings contract and chauffage contract, we propose that the guaranteed savings contract is the main development direction of building energy efficiency service in China. At the same time, new financing methods and energy-saving measurement and verification standards should be established to ensure that EMC plays an important role in the process of existing building energy retrofit in China.

Han, Z.; Liu, C.; Sun, J.

2006-01-01T23:59:59.000Z

50

Cost Savings and Energy Reduction: Bi-Level Lighting Retrofits in Multifamily Buildings  

E-Print Network (OSTI)

Community Environmental Center implements Bi- Level Lighting fixtures as a component of cost-effective multifamily retrofits. These systems achieve substantial energy savings by automatically reducing lighting levels when common areas are unoccupied. Because there is a lack of empirical evidence documenting the performance of these systems, this paper uses electric consumption data collected from buildings before and after retrofits were performed, and analyzes the cost and consumption savings achieved through installation of Bi-Level Lighting systems. The results of this report demonstrate that common areas that are currently not making use of Bi-Level lighting systems would achieve significant financial and environmental benefits from Bi-Level focused retrofits. This project concludes that building codes should be updated to reflect improvements in Bi-Level Lighting technologies, and that government-sponsored energy efficiency programs should explicitly encourage or mandate Bi-Level Lighting installation components of subsidized retrofit projects.

Ackley, J.

2010-01-01T23:59:59.000Z

51

Building Technologies Office: Building America Market Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

Market Partnerships Market Partnerships This photo shows two men silhouetted against a sky shaking hands, with the frame of a building under construction in the background. The U.S. Department of Energy (DOE) offers partnership opportunities, educational curricula, meetings, and webinars that help industry professionals bring research results to the market. DOE Challenge Home Through the DOE Challenge Home, the Building Technologies Office offers recognition to leading edge builders meeting extraordinary levels of excellence. Builders taking the challenge gain competitive advantage in the marketplace by providing their customers with unparalleled energy savings, quality, comfort, health, durability, and much more. Learn more about the DOE Challenge Home. ENERGY STAR for Homes Version 3

52

Energy and Cost Savings of Retro-Commissioning and Retrofit Measures for Large Office Buildings  

Science Conference Proceedings (OSTI)

This paper evaluates the energy and cost savings of seven retro-commissioning measures and 29 retrofit measures applicable to most large office buildings. The baseline model is for a hypothetical building with characteristics of large office buildings constructed before 1980. Each retro-commissioning measure is evaluated against the original baseline in terms of its potential of energy and cost savings while each retrofit measure is evaluated against the commissioned building. All measures are evaluated in five locations (Miami, Las Vegas, Seattle, Chicago and Duluth) to understand the impact of weather conditions on energy and cost savings. The results show that implementation of the seven operation and maintenance measures as part of a retro-commissioning process can yield an average of about 22% of energy use reduction and 14% of energy cost reduction. Widening zone temperature deadband, lowering VAV terminal minimum air flow set points and lighting upgrades are effective retrofit measures to be considered.

Wang, Weimin; Zhang, Jian; Moser, Dave; Liu, Guopeng; Athalye, Rahul A.; Liu, Bing

2012-08-03T23:59:59.000Z

53

Building Retrofits: Energy Conservation and Employee Retention Considerations in Medium-Size Commercial Buildings  

E-Print Network (OSTI)

Commercial buildings are among the largest consumers of energy. In an attempt to control and reduce operating expenses, building owners and organizations leasing commercial space are pursuing energy efficiency measures to generate a higher return on investment. In this study, an extensive literature review is used to identify and discuss energy efficiency considerations for medium-size building owners and how savings from these measures may benefit organizations through employee satisfaction and retention. For the purpose of this study, the specific topics related to commercial building energy efficiency that were investigated include (1) outcomes of building retrofits (2) corporate social responsibility and performance; (3) performance of energy efficient buildings; (4) employee commitment, satisfaction productivity and organizational profitability; (5) green companies and employee attraction; (6) the cost of turnover. There is little literature specifically focused on the impact that energy efficient buildings have on medium-sized building owners and no literature that quantifies the financial benefits through a reduction in employee turnover or attrition. Facility managers of all building sizes will benefit from gaining (1) a broad understanding of the impact of energy efficiency measures on employees (2) the ability to articulate the impact of the building’s role on employee productivity, turnover and other HR related issues (3) the insight needed to contribute to strategic discussions within their organization about how facilities can benefit organizational profitability. This research does not attempt to claim or determine a causal relationship between energy efficiency and employee turnover however it does discuss issues that that could affect employee attrition.. Further research to determine this causality would benefit the study of energy efficiency and its total impact on organizations.

Freeman, Janice

2013-05-01T23:59:59.000Z

54

High-Tech Buildings - Market Transformation Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Tech Buildings - Market Transformation Project Title High-Tech Buildings - Market Transformation Project Publication Type Report LBNL Report Number LBNL-49112 Year of Publication...

55

Strategy Guideline: Energy Retrofits for Low-Rise Multifamily Buildings in Cold Climates  

SciTech Connect

This Strategy Guideline explains the benefits of evaluating and identifying energy efficiency retrofit measures that could be made during renovation and maintenance of multifamily buildings. It focuses on low-rise multifamily structures (three or fewer stories) in a cold climate. These benefits lie primarily in reduced energy use, lower operating and maintenance costs, improved durability of the structure, and increased occupant comfort. This guideline focuses on retrofit measures for roof repair or replacement, exterior wall repair or gut rehab, and eating system maintenance. All buildings are assumed to have a flat ceiling and a trussed roof, wood- or steel-framed exterior walls, and one or more single or staged boilers. Estimated energy savings realized from the retrofits will vary, depending on the size and condition of the building, the extent of efficiency improvements, the efficiency of the heating equipment, the cost and type of fuel, and the climate location.

Frozyna, K.; Badger, L.

2013-04-01T23:59:59.000Z

56

Building Energy Software Tools Directory: MarketManager  

NLE Websites -- All DOE Office Websites (Extended Search)

MarketManager MarketManager MarketManager logo. Models any type of commercial, institutional, industrial, and residential facility and determines the energy and cost impact of virtually any type of energy conservation measure or utility rate schedule. MarketManager calculates the operating costs of any piece of equipment in the facility and determines the cost-effectiveness of improving the building envelope, HVAC controls, motors, lighting systems, heating and cooling equipment. Screen Shots Keywords building energy modeling, design, retrofit Validation/Testing N/A. Expertise Required MarketManager is best used by energy professionals who have a good understanding of HVAC systems.� Others have been known to use it. Users Approximately 1000 users worldwide, mostly in the United States.

57

The live test demonstration (LTD) of lighting retrofit technologies at the DOE Forrestal Building  

SciTech Connect

DOE`s Forrestal Building in Washington, DC, has successfully awarded a performance-based shared energy savings contract for retrofit of office and hallway lighting systems. The winning contractor estimates that the retrofit (and associated occupancy sensors) will lead to savings of up to 62% of the power currently used for lighting, with an estimated annual cost savings of $340,000. The retrofit will also increase lighting levels to required levels, while reducing total harmonic distortion on the lighting circuits. The performance-based shared energy savings approach to lighting retrofits will result in a guaranteed contract to maintain lighting levels and savings for the next seven years. Over the life of the contract, the shared energy savings approach will provide $1 million each for DOE and the contractor.

Halverson, M.A.; Schmelzer, J.R. [Pacific Northwest Lab., Richland, WA (United States); Harris, L.G. [USDOE, Washington, DC (United States)

1993-08-01T23:59:59.000Z

58

Persistence of energy savings of lighting retrofit technologies at the Forrestal Building  

SciTech Connect

In 1989, the Forrestal Building, headquarters for the U.S. Department of Energy, was chosen for a major lighting retrofit project. The project replaced the aging fighting system newer, energy-efficient fixtures. Pacific Northwest Laboratory conducted a three-part monitoring study at the Forrestal Building to (1) characterize building energy use, (2) empirically measure savings realized by the lighting retrofit, and (3) determine the persistence of energy savings. This report summarizes the findings from the third and final monitoring phase. Two data loggers were left installed at the Forrestal Building and data were collected for a 12-month period after the lighting retrofit was completed. An analysis-of-variance test indicated that the mean monthly lighting demand is increasing. A regression analysis performed on the data indicated that the mean monthly lighting demand for workdays is increasing at a rate of 0.3652{+-}0.1101 kW/mo. The nonworkday demand is increasing at a rate of 0.3408{+-}0.1027 kW/mo. During the same period, workday mean monthly plug load demand increased 0.0912{+-}0.0275 kW/mo., while nonworkday plug loads decreased slightly. The gradual increase, though significant, is reduced when compared to the 56% savings recorded after the lighting retrofit. The increase is attributed to a combination of occupants returning to original (pre-retrofit poor) behavior and a small set of occupancy sensors being defeated by building occupants. Degradation of lighting fixtures from {open_quotes}burn-in time{close_quotes} was ruled out because all burn-in time is expected in the first few months and the increasing trend persists over the 11 months of this study. Because the lighting demand was still increasing at the end of the study, without further data collection, it was not possible to determine when the increase would level out. Therefore, the true energy savings from the lighting retrofit remain unknown.

Chvala, W.D. Jr.; Wahlstrom, R.R.; Halverson, M.A.

1995-06-01T23:59:59.000Z

59

A Bin Method for Calculating Energy Conservation Retrofit Savings in Commercial Buildings  

E-Print Network (OSTI)

The calculation of measured energy savings from energy conservation retrofits is an important step in the verification of the success of a retrofit (Claridge et al. 1992). Several methods for calculating the savings from energy conservation retrofits to HVAC systems in the LoanSTAR program have been proposed, including linear and change-point linear empirical models and calibrated simulation models. Simple least squares linear regression is easiest to use and understand, but is incapable of describing non-linear temperature dependencies of a building's energy use. Change-point linear models are more complex than the simple linear regression and cover a broader range of buildings. However, there are some buildings for which change-point linear models do not fit the data adequately. This paper presents a first look at an hourly bin method for calculating energy savings from energy conservation retrofits to HVAC systems based on hourly whole-building electricity, sub-metered motor control center use and thermal energy measurements. A general procedure for determining the appropriate number of bins is described and the bin method is applied to data from several agencies participating in the LoanSTAR program. Results are compared to existing savings calculation procedures for two buildings.

Thamilseran, S.; Haberl, J. S.

1994-01-01T23:59:59.000Z

60

EnergySmart Schools Tips: Retrofitting, Operating, and Maintaining Existing Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EnergySmart Schools EnergySmart Schools EnergySmart Schools Tips: Retrofitting, Operating, and Maintaining Existing Buildings Quick wins and long-term facility management strategies that pay for themselves and result in energy savings Typical School Energy Use Distribution (varies by climate zone) 30% Lighting Cooling Space Heating Water Heating Other 23% 30% 10% 7% Combining preventative operations and maintenance (O&M) with strategic retrofitting of building systems improves a school's energy performance. For schools with limited resources and experience, "quick wins" in O&M and retrofitting provide a valuable starting point to energy management. As a next step, strategically prioritizing long- and short-term measures produces overall returns on investment. Please refer to the

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Preliminary guidelines for condition assessment of buildings being considered for solar retrofit  

DOE Green Energy (OSTI)

The report contains a general description of methods currently available for condition assessment of the structural; heating, ventilating, and air conditioning (HVAC); electrical; and plumbing systems of an existing building, in order to determine the feasibility of rehabilitation for solar retrofit.

Lerchen, F.H.; Pielert, J.H.; Chen, P.T.

1981-07-01T23:59:59.000Z

62

Byggmeister Test Home: Cold Climate Multifamily Masonry Building Condition Assessment and Retrofit Analysis  

SciTech Connect

This report describes a retrofit project undertaken by Building Science Corporation and partner Byggmeister on a multifamily brick row house located in Jamaica Plain, MA. This project studied the row house to determine the right combination of energy efficiency measures that are feasible, affordable, and suitable for this type of construction and acceptable to homeowners.

Wytrykowska, H.; Ueno, K.; Van Straaten, R.

2012-09-01T23:59:59.000Z

63

Building Retrofit and DSM Study in Jiangsu | Open Energy Information  

Open Energy Info (EERE)

Organization Natural Resources Defense Council Sector Energy Focus Area Buildings, Energy Efficiency Topics Background analysis, Pathways analysis, Policiesdeployment...

64

Market Assessment of Retrofit Dual-Fuel Diesel Generators  

Science Conference Proceedings (OSTI)

Reciprocating engines have long played an important role in the distributed resources market and should continue to provide end-use customers and energy companies benefits in both on-site and grid-connected power generation service. This report presents results of collaborative technical and economic market analyses with a major engine manufacturer to examine the prospects for conversion of existing diesel generators in the 500-2000 kW size range to dual-fuel (natural gas and diesel fuel) operation. Thes...

2001-11-30T23:59:59.000Z

65

Building energy retrofitting: from energy audit to renovation proposals.  

E-Print Network (OSTI)

?? Abstract The built environment is responsible for 40% of the global energy demand (1). To reduce building energy consumption, regulations are enhancing the appeal… (more)

Clément, Paul Francois

2012-01-01T23:59:59.000Z

66

Instrumenting Buildings to Determine Retrofit Savings: Murphy's Law Strikes Again  

E-Print Network (OSTI)

Experiences with instrumentation, installation and maintenance of building energy metering systems are presented. The building energy metering was installed in a variety of locations in programs handled by the Energy Systems Laboratory at Texas A&M University. Metering typically includes monitoring for the whole-building electric load, chilled and hot water thermal loads and selected submetered electrical loads. The emphasis of the lessons learned was on the instrumentation used and installation and maintenance problems encountered during the course of the metering projects.

O'Neal, D. L.; Bryant, J.; Carlson, K.

1998-01-01T23:59:59.000Z

67

Retrofitting Existing Buildings for Demand Response & Energy Efficiency  

E-Print Network (OSTI)

heating or cooling load, and enables existing Building Management Systems to control fan speed) · Lighting ­ 20% (solution: Adura ALPS partnership) · Plug loads, data centers ­ remainder (solution: WTR partnership) · Plug loads, data centers ­ remainder (solution: WTR, WBM) Source: US Energy Information

California at Los Angeles, University of

68

Deep Residential Retrofits in East Tennessee  

SciTech Connect

Executive Summary Oak Ridge National Laboratory (ORNL) is furthering residential energy retrofit research in the mixed-humid climate of East Tennessee by selecting 10 homes and guiding the homeowners in the energy retrofit process. The homeowners pay for the retrofits, and ORNL advises which retrofits to complete and collects post-retrofit data. This effort is in accordance with the Department of Energy s Building America program research goal of demonstrating market-ready energy retrofit packages that reduce home energy use by 30 50%. Through this research, ORNL researchers hope to understand why homeowners decide to partake in energy retrofits, the payback of home energy retrofits, and which retrofit packages most economically reduce energy use. Homeowner interviews help the researchers understand the homeowners experience. Information gathered during the interviews will aid in extending market penetration of home energy retrofits by helping researchers and the retrofit industry understand what drives homeowners in making positive decisions regarding these retrofits. This report summarizes the selection process, the pre-retrofit condition, the recommended retrofits, the actual cost of the retrofits (when available), and an estimated energy savings of the retrofit package using EnergyGauge . Of the 10 households selected to participate in the study, only five completed the recommended retrofits, three completed at least one but no more than three of the recommended retrofits, and two households did not complete any of the recommended retrofits. In the case of the two homes that did none of the recommended work, the pre-retrofit condition of the homes and the recommended retrofits are reported. The five homes that completed the recommended retrofits are monitored for energy consumption of the whole house, appliances, space conditioning equipment, water heater, and most of the other circuits with miscellaneous electric loads (MELs) and lighting. Thermal comfort is also monitored, with temperature and humidity measured in all conditioned zones, attics, crawlspaces, and unconditioned basements. In some homes, heat flux transducers are installed on the basement walls to help determine the insulating qualities of the technologies and practices. EnergyGauge is used to estimate the pre-retrofit and post-retrofit home energy rating system (HERS) index and reduction in energy consumption and energy bill. In a follow-up report, data from the installed sensors will be presented and analyzed as well as a comparison of the post-retrofit energy consumption of the home to the EnergyGauge model of the post-retrofit home. Table ES1 shows the retrofits that were completed at the eight households where some or all of the recommended retrofits were completed. Home aliases are used to keep the homeowners anonymous. Some key findings of this study thus far are listed as follows. Some homeowners (50%) are not willing to spend the money to reach 30 50% energy savings. Quality of retrofit work is significantly variable among contractors which impact the potential energy savings of the retrofit. Challenges exist in defining house volume and floor area. Of the five homes that completed all the recommended retrofits, energy bill savings was not the main driver for energy retrofits. In no case were the retrofits cost neutral given a 15 year loan at 7% interest for the retrofit costs.

Boudreaux, Philip R [ORNL; Hendrick, Timothy P [ORNL; Christian, Jeffrey E [ORNL; Jackson, Roderick K [ORNL

2012-04-01T23:59:59.000Z

69

Standard Measurement and Verification Plan for Lighting Retrofit Projects for Buildings and Building Sites  

SciTech Connect

This document provides a framework for standard measurement and verification (M&V) of lighting retrofit and replacement projects. It was developed to provide site owners, contractors, and other involved organizations with the essential elements of a robust M&V plan for lighting projects. It includes details on all aspects of effectively measuring light levels of existing and post-retrofit projects, conducting power measurement, and developing cost-effectiveness analysis. This framework M&V plan also enables consistent comparison among similar lighting projects, and may be used to develop M&V plans for non--lighting-technology retrofits and new installations.

Richman, Eric E.

2012-10-31T23:59:59.000Z

70

Building America Efficient Solutions for Existing Homes Case Study: Retrofit of 1915 Home, Dayton, Washington  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Built in 1915, this two-story, three-bedroom home with an unfinished Built in 1915, this two-story, three-bedroom home with an unfinished basement and 2,600 ft 2 of living space is typical of many older homes found in eastern Washington. Through the U.S. Department of Energy's Building America program, researchers from the Pacific Northwest National Laboratory worked with local energy rater Energy Incentives, Inc., to assist the home owners in cost-effectively reducing their energy use by over 50%. The researchers used Energy Gauge USA simulation software to model retrofit packages and predict the most cost-effective retrofit measures within the homeowner's budget. The presence of asbestos insulation on the boiler made it more cost- effective to pursue efficiency measures that left the boiler in place to avoid the additional costs of disposal. Major energy and cost savings

71

Retrofit Options for Increasing Energy Efficiency in Office Buildings- Methodology Review  

E-Print Network (OSTI)

Portuguese Buildings represent 35% of primary energy consumption in 2006, with non-residential sector representing almost half of this number globally and around 65% in Lisbon city. Expected to grow 5% yearly in this period, non-residential buildings rehabilitation is a great opportunity for energy rehabilitation for a stock of 800.000 buildings needing medium to high interventions. For this task to be successful it is also urgent that procedures consider an accurate technical framework, where existing technologies and best case-studies can be considered, in order to drive passive measures retrofitting forward. This paper presents an overview of a methodology development which pretends to include the energy component in rehabilitation schemes with an integrated and comprehensive analysis, achieving all those directly involved in the building process (owners, consumers, public bodies, construction and project design industry) as well as new important players such as ESCOs.

Pereira, N. C.

2008-10-01T23:59:59.000Z

72

Design of an atrium for a passive-solar retrofit of an office buildings  

DOE Green Energy (OSTI)

The Los Alamos Scientific Laboratory (LASL) has proposed to retrofit one of its administrative office buildings with a solar atrium. A 334 m/sup 2/ courtyard will be enclosed with a roof-mounted system of clerestory windows to maximize winter solar gain. This sunspace will thermally buffer the adjoining offices and also will preheat air supplied to the building's conventional heating, ventilating, and air-conditioning (HVAC) system. The use of the DOE-2 building energy analysis computer program in the design of the solar atrium is described. The results of a series of simulations are reported detailing the tradeoffs inherent in the selection of an optimal glazing area, the maintenance of acceptable comfort levels within the sunspace, and intergration of passive-solar devices with the conventional HVAC system. Potential energy savings are also discussed.

Peterson, J.L.; Hunn, B.D.

1980-01-01T23:59:59.000Z

73

Impact evaluation of the energy retrofits installed in the Margolis high-rise apartment building, Chelsea housing authority  

SciTech Connect

As part of a joint demonstration effort involving HUD, DOE, a local public housing authority and Boston Edison, an evaluation of energy and demand saving retrofits was conducted for a tall, residential, low-income building located in Boston. The thirteen story building underwent window, lighting, and heating system control renovations in December, 1992. The success of these retrofits was determined using monthly and hourly whole-building consumption data along with a calibrated DOE-2.1D energy simulation model. According to the model developed, post-retrofit conditions showed reductions in annual energy consumption of 325 MWh and in peak demand of 100 kW. These savings resulted in an annual energy cost savings of $28,000. Over 90% of energy and cost savings were attributed to the window retrofit. Interaction of the reduction in lighting capacity with the building`s electric resistance heating system reduced the potential for energy and demand savings associated with the lighting retrofit. Results from the hourly simulation model also indicate that night setbacks controlled by the energy management system were not implemented. An additional 32 MWh in energy savings could be obtained by bringing this system on-line, however peak demand would be increased by 40 kW as the morning demand for space heat is increased, with a net loss in cost savings of $2,500.

Abraham, M.M.; McLain, H.A.; MacDonald, J.M.

1995-03-01T23:59:59.000Z

74

Building Technologies Office: Building America Market Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Technologies Office Search Search Help Building Technologies Office HOME...

75

High-tech buildings - Market transformation project  

E-Print Network (OSTI)

buildings program. Perform market research and benchmark energybuilding owners, operators, and designers to compare energy use for a given cleanroom to others, it is necessary to benchmark

Applications Team

2001-01-01T23:59:59.000Z

76

Commercial Building Energy Asset Rating Program -- Market Research  

Science Conference Proceedings (OSTI)

Under contract to Pacific Northwest National Laboratory, HaydenTanner, LLC conducted an in-depth analysis of the potential market value of a commercial building energy asset rating program for the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy. The market research objectives were to: (1) Evaluate market interest and need for a program and tool to offer asset rating and rapidly identify potential energy efficiency measures for the commercial building sector. (2) Identify key input variables and asset rating outputs that would facilitate increased investment in energy efficiency. (3) Assess best practices and lessons learned from existing national and international energy rating programs. (4) Identify core messaging to motivate owners, investors, financiers, and others in the real estate sector to adopt a voluntary asset rating program and, as a consequence, deploy high-performance strategies and technologies across new and existing buildings. (5) Identify leverage factors and incentives that facilitate increased investment in these buildings. To meet these objectives, work consisted of a review of the relevant literature, examination of existing and emergent asset and operational rating systems, interviews with industry stakeholders, and an evaluation of the value implication of an asset label on asset valuation. This report documents the analysis methodology and findings, conclusion, and recommendations. Its intent is to support and inform the DOE Office of Energy Efficiency and Renewable Energy on the market need and potential value impacts of an asset labeling and diagnostic tool to encourage high-performance new buildings and building efficiency retrofit projects.

McCabe, Molly J.; Wang, Na

2012-04-19T23:59:59.000Z

77

Hydronic Controls Retrofits for Low-Rise Multi-Famiy Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Integrated Energy Solutions Residential Integrated Energy Solutions Building America Stakeholder Meeting Austin, Texas February 29 to March 2, 2012 Hugh Henderson, CDH Energy Corp. Jordan Dentz, The Levy Partnership, Inc. Hydronic Controls Retrofits for Low-Rise Multi-Family Buildings Research Objective * Determine the impact of control strategies that use apartment temperatures for central boiler control on energy consumption, comfort and cost. * Compare energy performance, comfort and cost to individual radiator valve controls in each apartment. Background * Most multi-family boiler systems have: - No zone/apartment level control, or - Non-electric thermostats on radiator valves * Central boiler system resets hot water based on outdoor temperature * Problem: - apartments are often too hot or too cold.

78

National Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry (Fact Sheet), Building America: Technical Highlight, Building Technologies Program (BTP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry Researchers at the U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) have developed the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures. The data are available for use in software programs that evaluate cost- effective retrofit measures to improve the energy efficiency of residential buildings. This database: * Provides information in a standardized format. * Improves the technical consistency and accuracy of the results of software programs. * Enables experts and stakeholders to view the retrofit information and provide comments to improve data

79

Building America: Bringing Building Innovations to Market | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

America: Bringing Building America: Bringing Building Innovations to Market Building America: Bringing Building Innovations to Market INNOVATIONS Advanced technologies and whole-house solutions for saving energy and costs. Read more SOLUTION CENTER Solutions for improving the energy performance and quality of new and existing homes. Read more RESEARCH TOOLS Tools to ensure consistent research results for new and existing homes. Read more MARKET PARTNERSHIPS Resources and partnering opportunities for the U.S. building industry. Read more Learn about how this world-class research program can help the U.S. building industry promote and construct homes that are better for business, homeowners, and the nation. Building America logo The U.S. Department of Energy's (DOE) Building America program has been a

80

Building America Market Partnerships | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Market Partnerships Market Partnerships Building America Market Partnerships This photo shows two men silhouetted against a sky shaking hands, with the frame of a building under construction in the background. The U.S. Department of Energy (DOE) offers partnership opportunities, educational curricula, meetings, and webinars that help industry professionals bring research results to the market. DOE Challenge Home Through the DOE Challenge Home, the Building Technologies Office offers recognition to leading edge builders meeting extraordinary levels of excellence. Builders taking the challenge gain competitive advantage in the marketplace by providing their customers with unparalleled energy savings, quality, comfort, health, durability, and much more. Learn more about the DOE Challenge Home.

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Simulation of the Post-Retrofit Thermal Energy Use for the Perry-Castaneda Library Building with the Use of Simplified System Models  

E-Print Network (OSTI)

Several state owned buildings with dual-duct constant volume (DDCV) systems are being retrofitted with energy efficient variable air volume (VAV) systems as part of Texas LoanSTAR Program. One method of determining the energy savings resulting from energy conserving retrofits relies on the use of a model for the daily whole building consumption, Epre, in the pre-retrofit configuration. Epre is typically a function of primary influencing parameters such as ambient temperature, humidity, building internal gains and others (Figure 1). Following the retrofit, the energy saved, E,av is determined using measured daily consumption, Emea3 as shown in Figure 1. This method is being used in the Texas LoanSTAR monitoring and analysis program for buildings that have adequate pre-retrofit monitored data. Unfortunately, in the Perry-Castaneda Library (PCL) building, the retrofits were completed before the monitoring instrumentation was installed. Therefore, no pre-retrofit monitored data are available for this building. Hence another method to estimate savings is needed. Such a method was developed and tested (Katipamula and Claridge 1991). This method was based on the use of the ASHRAE TC 4.7 simplified energy analysis procedure (SEAP). It involved developing one model each for the VAV (post-retrofit system) and the DDCV (pre-retrofit system) systems.

Katipamula, S.; Claridge, D. E.

1991-01-01T23:59:59.000Z

82

Building America Best Practices Series, Vol. 10 - Retrofit Techniques & Technologies: Air Sealing, A Guide for Contractors to Share with Homeowners  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TECHNOLOGIES PROGRAM TECHNOLOGIES PROGRAM R Retrofit Techniques & Technologies: Air Sealing A Guide for Contractors to Share with Homeowners PREPARED BY Pacific Northwest National Laboratory & Oak Ridge National Laboratory April 12, 2010 April 12, 2010 * PNNL-19284 BUILDING AMERICA BEST PRACTICES SERIES VOLUME 10. BuiLDiNG AmERiCA BEST PRACTiCES SERiES Retrofit Techniques and Technologies: Air Sealing

83

Expert Meeting Report: Interior Insulation Retrofit of Mass Masonry Wall Assembliesessment of risk factors for premature building deterioration due to interior insulation retrofits, and methods to reduce such risks.  

Energy.gov (U.S. Department of Energy (DOE))

The Building Science Consortium held an Expert Meeting on Interior Insulation Retrofit of Mass Masonry Wall Assemblies on July 30, 2011 at the Westford Regency Hotel in Westford, MA. This report outlines the extensive information that was presented on ass

84

Building America Best Practices Series, Volume 10: Retrofit Techniques and Technologies: Air Sealing  

SciTech Connect

This report was prepared by PNNL for the U.S. Department of Energy Building America Program. The report provides information to home owners who want to make their existing homes more energy efficient by sealing leaks in the building envelope (ceiling, walls, and floors) that let in drafts and let conditioned air escape. The report provides descriptions of 19 key areas of the home where air sealing can improve home performance and energy efficiency. The report includes suggestions on how to find a qualified weatherization or home performance contractor, what to expect in a home energy audit, opportune times for performing air sealing, and what safety and health concerns to be aware of. The report describes some basic building science concepts and topics related to air sealing including ventilation, diagnostic tools, and code requirements. The report will be available for free download from the DOE Building America website. It is a suitable consumer education tool for home performance and weatherization contractors to share with customers to describe the process and value of home energy retrofits.

Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Cole, Pamala C.; Williamson, Jennifer L.; Love, Pat M.

2010-04-12T23:59:59.000Z

85

Evaluation of a Multifamily Retrofit in Climate Zone 5, Boulder, Colorado (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Evaluation of a Multifamily Evaluation of a Multifamily Retrofit in Climate Zone 5 Boulder, Colorado PROJECT INFORMATION Project Name: Evaluation of a Low-Rise Multifamily Retrofit in Boulder, CO Location: Boulder, CO Consortium of Advanced Residential Buildings www.carb-swa.com Building Component: Building envelope, lighting, appliances, water conservation Application: Retrofit Years Tested: 2012 Applicable Climate Zone(s): Cold, very cold PERFORMANCE DATA Cost of Energy Efficiency Measure (including labor): $3,300-$6,100 per unit with total complex cost estimate of ~$150,000 Projected Energy Savings: 27%-41% depending on unit location/orientation Projected Energy Cost Savings: $154-$304 utility savings per year In 2009, a 37-unit apartment complex located in Boulder, Colorado, underwent

86

Simulation of the Post-Retrofit Thermal Energy Use for the University Teaching Center (UTC) Building with the Use of Simplified System Models  

E-Print Network (OSTI)

Several state owned buildings with dual-duct constant volume (DDCV) systems have been retrofitted with energy efficient variable air volume systems (VAV) as part of the Texas LoanSTAR Program. One method of determining the energy savings resulting from energy conserving retrofits relies on the use of a model for the daily whole building consumption, Epre, in the pre-retrofit configuration. Epre is typically a function of primary influencing parameters such as ambient temperature, humidity, building internal gains and others (Figure 1). Following the retrofit, the energy saved, Esav is determined using measured daily consumption, Emea3 as shown in Figure 1. This method is being used in the Texas LoanSTAR monitoring and analysis program for buildings that have adequate pre-retrofit monitored data (Kelly et al., 1992). Unfortunately, in the University Teaching Center (UTC) the retrofits were completed before the monitoring instrumentation was installed. Therefore, no pre-retrofit monitored data are available. Hence another method to estimate savings was needed. Such a method was developed and tested on a large engineering center (Katipamula and Claridge 1991). This method was based on the use of the ASHRAE TC 4.7 simplified energy analysis procedure (SEAP). It involved developing one model each for the VAV (post-retrofit system) and the DDCV (pre-retrofit system) systems.

Katipamula, S.; Claridge, D. E.

1991-01-01T23:59:59.000Z

87

Specification and cost manual for energy retrofits on small commercial and multifamily buildings  

DOE Green Energy (OSTI)

This specification/cost manual was prepared as part of DOE's technical assistance to the states, utilities and other groups participating in the Commercial and Apartment Conservation Service (CACS) program. The intention is to provide a set of standardized specifications and cost information for the CACS program measures. The material was designed to be used primarily by contractors and others in preparing cost estimates at the request of CACS utilities. This information can also be used by CACS participants in preparing state plans, analyzing which measures are best-suited for their particular climates, computing paybacks, and carrying out audits. In addition, this publication may be of interest to the wider audience involved in the energy retrofit field, ranging from architects and engineers to energy auditors and building inspectors. Each specification contains several categories of information: title; description; recommendations; materials; installation; maintenance; cost information; material cost variables, installation cost variables, regional variables, and safety/hazard issues. The document is divided into six sections: building envelope and service insulation measures; HVAC measures: simple systems; HVAC measures: complex systems; lighting system measures; active solar system measures; and passive solar system measures.

Bircher, C.; Carlisle, N.; Hunter, K.; MacDonald, M.; Shapira, H.; Vineyard, T.A.; Kolb, J.

1984-07-01T23:59:59.000Z

88

Better Buildings Neighborhood Program: Step 7: Determine Loan Marketing  

NLE Websites -- All DOE Office Websites (Extended Search)

7: 7: Determine Loan Marketing Channels to someone by E-mail Share Better Buildings Neighborhood Program: Step 7: Determine Loan Marketing Channels on Facebook Tweet about Better Buildings Neighborhood Program: Step 7: Determine Loan Marketing Channels on Twitter Bookmark Better Buildings Neighborhood Program: Step 7: Determine Loan Marketing Channels on Google Bookmark Better Buildings Neighborhood Program: Step 7: Determine Loan Marketing Channels on Delicious Rank Better Buildings Neighborhood Program: Step 7: Determine Loan Marketing Channels on Digg Find More places to share Better Buildings Neighborhood Program: Step 7: Determine Loan Marketing Channels on AddThis.com... Getting Started Driving Demand Financing Assess the Market Define Finance Program Objectives

89

Retrofitting of Conditioning Systems for Existing Small Commercial Buildings - Analysis and Design of Liquid Desiccant - Vapor Compression Hybrid  

E-Print Network (OSTI)

The combination of several concepts of new energy technologies may make it possible to reduce the energy needs for thermal comfort, especially cooling and dehumidification, in small sized, single-story commercial buildings. The potentials and limitations of retrofit technology for these characteristic structures have been the focus of the experience gained through the design and installation of a system adapted to a building constructed in the early 1960's. The existing split package air conditioning system was combined with a desiccant air-conditioning unit with a waste heat and solar heat reclaim component. While this retrofit system is feasible, a number of questions remain to be considered regarding the design, installation and operation of the total system. This paper focuses on the practical applications of such a hybrid system - both architectural/construction issues and the mechanical components/system considerations.

Arnas, O. A.; McQueen, T. M.

1984-01-01T23:59:59.000Z

90

Building America Efficient Solutions for Existing Homes Case Study: Deep Energy Retrofit of 1910 House, Portland, Oregon  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

one-and-a-half-story, two-bedroom home with a half-basement one-and-a-half-story, two-bedroom home with a half-basement is typical of 100-year-old homes in Portland, Oregon. The home had no insulation, an unfinished basement, old appliances and air leaks everywhere when purchased by its current owner in 2010. The owners performed a full deep energy retrofit, including air sealing and insulating exterior walls and attic and installing new, efficient appliances. Building America researchers from the Pacific Northwest National Laboratory audited the home after the retrofits had occurred and used Energy Gauge USA simulation software to predict energy savings. They also partnered with local home performance contractor Imagine Energy to meter the circuit-level electricity use and the natural gas use of the tankless hot water heater and 95% condensing gas furnace. Based on

91

Building Technologies Office: Market-Driven Research Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

Market-Driven Research Market-Driven Research Solutions to someone by E-mail Share Building Technologies Office: Market-Driven Research Solutions on Facebook Tweet about Building Technologies Office: Market-Driven Research Solutions on Twitter Bookmark Building Technologies Office: Market-Driven Research Solutions on Google Bookmark Building Technologies Office: Market-Driven Research Solutions on Delicious Rank Building Technologies Office: Market-Driven Research Solutions on Digg Find More places to share Building Technologies Office: Market-Driven Research Solutions on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Solar Decathlon Building America Research Innovations Research Tools Building Science Education Climate-Specific Guidance Solution Center Partnerships

92

EnergySmart Schools Tips: Retrofitting, Operating, and Maintaining...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EnergySmart Schools Tips: Retrofitting, Operating, and Maintaining Existing Buildings EnergySmart Schools Tips: Retrofitting, Operating, and Maintaining Existing Buildings An...

93

The USDOE Forrestal Building Lighting Retrofit: Preliminary Analysis of Electricity Savings  

E-Print Network (OSTI)

In September of 1993 a 36,832 fixture lighting retrofit was completed at the United States Department of Energy Forrestal complex in Washington, D.C. This retrofit represents DOE's largest project to date that utilizes a Shared Energy Savings (SES) agreement as authorized under Public Law 99-272. As DOE's first major SES contract, it was important that every aspect of this project serve as the cornerstone of DOE's Federal Relighting Initiative, including the careful measurement of the electricity and thermal energy savings.

Haberl, J. S.; Bou-Saada, T. E.; Vajda, E. J.; Shincovich, M.; D'Angelo III, L.; Harris, L.

1994-01-01T23:59:59.000Z

94

Bay Ridge Gardens - Mixed Humid Affordable Multifamily Housing Deep Energy Retrofit: Annapolis, Maryland. Building America Case Study: Efficient Solutions for New and Existing Homes (Fact Sheet)  

SciTech Connect

Under this project, Newport Partners (as part of the BA-PIRC research team) evaluated the installation, measured performance, and cost-effectiveness of efficiency upgrade measures for a tenant-in-place DER at the Bay Ridge multifamily (MF) development in Annapolis, Maryland. The design and construction phase of the Bay Ridge project was completed in August 2012. This report summarizes system commissioning, short-term test results, utility bill data analysis, and analysis of real-time data collected over a one-year period after the retrofit was complete. The Bay Ridge project is comprised of a "base scope" retrofit which was estimated to achieve a 30%+ savings (relative to pre-retrofit) on 186 apartments, and a "DER scope" which was estimated to achieve 50% savings (relative to pre-retrofit) on a 12-unit building. The base scope was applied to the entire apartment complex, except for one 12-unit building which underwent the DER scope. A wide range of efficiency measures was applied to pursue this savings target for the DER building, including improvements/replacements of mechanical equipment and distribution systems, appliances, lighting and lighting controls, the building envelope, hot water conservation measures, and resident education. The results of this research build upon the current body of knowledge of multifamily retrofits. Towards this end, the research team has collected and generated data on the selection of measures, their estimated performance, their measured performance, and risk factors and their impact on potential measures.

Not Available

2013-10-01T23:59:59.000Z

95

Building Diagnostic Market Deployment - Final Report  

SciTech Connect

The work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy’s Pacific Northwest National Laboratory (PNNL) and KGS Building LLC (KGS). PNNL and KGS both believe that the widespread adoption of automated fault de4tection and diagnostic (AFDD) tools will result in significant reduction to energy and peak energy consumption. The report provides an introduction, and summary of the various tasks performed under the CRADA. The CRADA project had three major focus areas: 1) Technical Assistance for Whole Building Energy Diagnostician (WBE) Commercialization, 2) Market Transfer of the Outdoor Air/Economizer Diagnostician (OAE), and 3) Development and Deployment of Automated Diagnostics to Improve Large Commercial Building Operations.

Katipamula, Srinivas; Gayeski, N.

2012-04-01T23:59:59.000Z

96

Office Buildings: Market Analysis for Electricity Service Providers  

Science Conference Proceedings (OSTI)

Office buildings nationwide account for the greatest floor space and energy use of all commercial building types. To best serve and retain the loyalty of this important market, electric utilities need to understand the energy uses, priorities, and decision-making approaches of commercial building managers. This report assesses the office building energy market to provide a basic reference for utility program planners, marketing managers, and field representatives.

1997-04-16T23:59:59.000Z

97

Better Buildings Neighborhood Program: Step 8: Implement Your Marketing  

NLE Websites -- All DOE Office Websites (Extended Search)

8: 8: Implement Your Marketing Plan to someone by E-mail Share Better Buildings Neighborhood Program: Step 8: Implement Your Marketing Plan on Facebook Tweet about Better Buildings Neighborhood Program: Step 8: Implement Your Marketing Plan on Twitter Bookmark Better Buildings Neighborhood Program: Step 8: Implement Your Marketing Plan on Google Bookmark Better Buildings Neighborhood Program: Step 8: Implement Your Marketing Plan on Delicious Rank Better Buildings Neighborhood Program: Step 8: Implement Your Marketing Plan on Digg Find More places to share Better Buildings Neighborhood Program: Step 8: Implement Your Marketing Plan on AddThis.com... Getting Started Driving Demand Set Goals & Objectives Create an Evaluation Plan Conduct Audience Research Identify Target Audiences & Behavior Changes

98

Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan  

NLE Websites -- All DOE Office Websites (Extended Search)

7: 7: Develop a Marketing Plan to someone by E-mail Share Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Facebook Tweet about Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Twitter Bookmark Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Google Bookmark Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Delicious Rank Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on Digg Find More places to share Better Buildings Neighborhood Program: Step 7: Develop a Marketing Plan on AddThis.com... Getting Started Driving Demand Set Goals & Objectives Create an Evaluation Plan Conduct Audience Research Identify Target Audiences & Behavior Changes

99

Thinking Like a Whole Building: A Whole Foods Market New Construction Case Study  

SciTech Connect

Whole Foods Market participates in the U.S. Department of Energy's Commercial Building Partnerships (CBP) to identify and develop cost-effective, readily deployed, replicable energy efficiency measures (EEMs) for commercial buildings. Whole Foods Market is working with the National Renewable Energy Laboratory (NREL) on a retrofit and a new construction CBP project. Whole Foods Market's CBP new construction project is a standalone store in Raleigh, North Carolina. Whole Foods Market examined the energy systems and the interactions between those systems in the design for the new Raleigh store. Based on this collaboration and preliminary energy modeling, Whole Foods Market and NREL identified a number of cost-effective EEMs that can be readily deployed in other Whole Foods Market stores and in other U.S. supermarkets. If the actual savings in the Raleigh store - which NREL will monitor and verify - match the modeling results, each year this store will save nearly $100,000 in operating costs (Raleigh's rates are about $0.06/kWh for electricity and $0.83/therm for natural gas). The store will also use 41% less energy than a Standard 90.1-compliant store and avoid about 3.7 million pounds of carbon dioxide emissions.

Deru, M.; Bonnema, E.; Doebber, I.; Hirsch, A.; McIntyre, M.; Scheib, J.

2011-04-01T23:59:59.000Z

100

Analysis of the Russian Market for Building Energy Efficiency  

Science Conference Proceedings (OSTI)

This report provides analysis of the Russian energy efficiency market for the building sector from the perspective of U.S. businesses interested in exporting relevant technologies, products and experience to Russia. We aim to help U.S. energy efficiency and environmental technologies businesses to better understand the Russian building market to plan their market strategy.

Lychuk, Taras; Evans, Meredydd; Halverson, Mark A.; Roshchanka, Volha

2012-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Use of an atrium for the passive-solar retrofit of an office building: design and installation experience  

DOE Green Energy (OSTI)

A clerestory window system has been installed over a courtyard in an existing two-story office building/museum at the Los Alamos National Laboratory, thus creating an atrium. This atrium serves as a passive solar heating and daylighting system for the building and provides new display space for the museum. The retrofit consists of a roof-mounted clerestory window system with night insulating shutters which: forms an atrium that provides new museum space, buffers the former courtyard walls and windows, preheats ventilation air for the entire building, and provides daylighting and heating for the new museum space. The passive system is coupled to the heating, ventilating, and air-conditioning (HVAC) system of the surrounding building by inducing fresh-air makeup through the solar-tempered atrium; heating, cooling, and daylighting are addressed in the design. The design process, the use of the DOE-2 building energy analysis computer program during design, and the construction of the atrium are described.

Hunn, B.D.; Peterson, J.L.

1982-01-01T23:59:59.000Z

102

Scenario analysis of retrofit strategies for reducing energy consumption in Norwegian office buildings  

E-Print Network (OSTI)

Model buildings were created for simulation to describe typical office buildings from different construction periods. A simulation program was written to predict the annual energy consumption of the buildings in their ...

Engblom, Lisa A. (Lisa Allison)

2006-01-01T23:59:59.000Z

103

Hungary-Employment Impacts of a Large-Scale Deep Building Retrofit...  

Open Energy Info (EERE)

European Climate Foundation Sector Energy Focus Area Energy Efficiency, Buildings, - Building Energy Efficiency Topics Co-benefits assessment, Background analysis Resource...

104

Scenario analysis of retrofit strategies for reducing energy consumption in Norwegian office buildings.  

E-Print Network (OSTI)

??Model buildings were created for simulation to describe typical office buildings from different construction periods. A simulation program was written to predict the annual energy… (more)

Engblom, Lisa A. (Lisa Allison)

2006-01-01T23:59:59.000Z

105

Building Diagnostic Market Deployment - Final Report  

Science Conference Proceedings (OSTI)

Operational faults are pervasive across the commercial buildings sector, wasting energy and increasing energy costs by up to about 30% (Mills 2009, Liu et al. 2003, Claridge et al. 2000, Katipamula and Brambley 2008, and Brambley and Katipamula 2009). Automated fault detection and diagnostic (AFDD) tools provide capabilities essential for detecting and correcting these problems and eliminating the associated energy waste and costs. The U.S. Department of Energy's (DOE) Building Technology Program (BTP) has previously invested in developing and testing of such diagnostic tools for whole-building (and major system) energy use, air handlers, chillers, cooling towers, chilled-water distribution systems, and boilers. These diagnostic processes can be used to make the commercial buildings more energy efficient. The work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy's Pacific Northwest National Laboratory (PNNL) and KGS Building LLC (KGS). PNNL and KGS both believe that the widespread adoption of AFDD tools will result in significant reduction to energy and peak energy consumption. The report provides an introduction and summary of the various tasks performed under the CRADA. The CRADA project had three major focus areas: (1) Technical Assistance for Whole Building Energy Diagnostician (WBE) Commercialization, (2) Market Transfer of the Outdoor Air/Economizer Diagnostician (OAE), and (3) Development and Deployment of Automated Diagnostics to Improve Large Commercial Building Operations. PNNL has previously developed two diagnostic tools: (1) whole building energy (WBE) diagnostician and (2) outdoor air/economizer (OAE) diagnostician. WBE diagnostician is currently licensed non-exclusively to one company. As part of this CRADA, PNNL developed implementation documentation and provided technical support to KGS to implement the tool into their software suite, Clockworks. PNNL also provided validation data sets and the WBE software tool to validate the KGS implementation. OAE diagnostician automatically detects and diagnoses problems with outdoor air ventilation and economizer operation for air handling units (AHUs) in commercial buildings using data available from building automation systems (BASs). As part of this CRADA, PNNL developed implementation documentation and provided technical support to KGS to implement the tool into their software suite. PNNL also provided validation data sets and the OAE software tool to validate the KGS implementation. Finally, as part of this CRADA project, PNNL developed new processes to automate parts of the re-tuning process and transfer those process to KGS for integration into their software product. The transfer of DOE-funded technologies will transform the commercial buildings sector by making buildings more energy efficient and also reducing the carbon footprint from the buildings. As part of the CRADA with PNNL, KGS implemented the whole building energy diagnostician, a portion of outdoor air economizer diagnostician and a number of measures that automate the identification of re-tuning measures.

Katipamula, S.; Gayeski, N.

2012-04-30T23:59:59.000Z

106

Empowering the Market: How Building Energy Performance Rating...  

NLE Websites -- All DOE Office Websites (Extended Search)

Empowering the Market: How Building Energy Performance Rating and Disclosure Policies Encourage U.S. Energy Efficiency Secondary menu About us Press room Contact Us Portfolio...

107

Multifamily Ventilation Retrofit Strategies  

SciTech Connect

In multifamily buildings, central ventilation systems often have poor performance, overventilating some portions of the building (causing excess energy use), while simultaneously underventilating other portions (causing diminished indoor air quality). BSC and Innova Services Corporation performed a series of field tests at a mid-rise test building undergoing a major energy audit and retrofit, which included ventilation system upgrades.

Ueno, K.; Lstiburek, J.; Bergey, D.

2012-12-01T23:59:59.000Z

108

Expert Meeting Report: Interior Insulation Retrofit of Mass Masonry...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Insulation Retrofit of Mass Masonry Wall Assembliesessment of risk factors for premature building deterioration due to interior insulation retrofits, and methods to reduce such...

109

The design and retrofit of buildings for resistance to blast-induced progressive collapse  

E-Print Network (OSTI)

In recent years, concern has risen drastically regarding the suitability of structural design for blast resistance. Historic events have proven that buildings that are designed in compliance with conventional building codes ...

Abbott Galvão Sobreira Lopes, Isabel

2009-01-01T23:59:59.000Z

110

The design and retrofit of buildings for resistance to blast-induced progressive collapse.  

E-Print Network (OSTI)

??In recent years, concern has risen drastically regarding the suitability of structural design for blast resistance. Historic events have proven that buildings that are designed… (more)

Abbott Galvão Sobreira Lopes, Isabel

2009-01-01T23:59:59.000Z

111

Building Technologies Office: Market-Based Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

To facilitate successful market introduction of high-quality, energy-efficient SSL products for general illumination, DOE has developed a Five-Year SSL Market Development Support...

112

Review of Methods for Measuring and Verifying Savings from Energy Conservation Retrofits to Existing Buildings  

E-Print Network (OSTI)

The Measurement & Verification (M&V) process has evolved in the last 15 years to provide a high confidence approach for determining the resulting savings from a variety of retrofits and energy efficiency enhancements. M&V has a dual role. First, it quantifies the savings being obtained. Since the persistence of savings has been shown to decrease with time,1 long-term M&V provides data to make these savings sustainable. Second, M&V must be cost effective so that the cost of measurement and the analysis does not consume the savings.2, 3 Currently, a goal of about 5% of the savings per year has evolved as a preferred criteria for costing M&V, since the cost justification directly results from the savings obtained. The general procedure involves a selection of using a monthly billing analysis, a daily or hourly procedure, a component isolation analysis, or a calibrated simulation. Calibrated simulations are usually expensive and difficult to complete.

Haberl, J. S.; Culp, C.

2003-01-01T23:59:59.000Z

113

Empowering the Market: How Building Energy Performance Rating and  

NLE Websites -- All DOE Office Websites (Extended Search)

Empowering the Market: How Building Energy Performance Rating and Empowering the Market: How Building Energy Performance Rating and Disclosure Policies Encourage U.S. Energy Efficiency Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition

114

Energy Engineering Analysis Program (EEAP), Fort Bliss headquarters building, lighting retrofit, Fort Bliss, El Paso, Texas  

SciTech Connect

The purpose of this study is to analyze the use of high efficiency fluorescent lighting with energy efficient lamps and electronic ballast for the Headquarters Building (Bldg. number 2) at Fort Bliss.

1993-02-01T23:59:59.000Z

115

Hydronic Heating Retrofits for Low-Rise Multifamily Buildings: Boiler Control Replacement and Monitoring  

SciTech Connect

The ARIES Collaborative, a U.S. Department of Energy Building America research team, partnered with NeighborWorks America affiliate Homeowners' Rehab Inc. of Cambridge, Massachusetts, to implement and study improvements to the central hydronic heating system in one of the nonprofit's housing developments. The heating control systems in the three-building, 42-unit Columbia Cambridge Alliance for Spanish Tenants housing development were upgraded.

Dentz, J.; Henderson, H.; Varshney, K.

2013-10-01T23:59:59.000Z

116

Advancing Residential Energy Retrofits  

Science Conference Proceedings (OSTI)

To advance the market penetration of residential retrofits, Oak Ridge National Laboratory (ORNL) and Southface Energy Institute (Southface) partnered to provide technical assistance on nine home energy retrofits in metropolitan Atlanta with simulated source energy savings of 30% to 50%. Retrofit measures included duct sealing, air infiltration reductions, attic sealing and roofline insulation, crawlspace sealing, HVAC and water heating equipment replacement, and lighting and appliance upgrades. This paper will present a summary of these measures and their associated impacts on important home performance metrics, such as air infiltration and duct leakage. The average estimated source energy savings for the homes is 33%, and the actual heating season average savings is 32%. Additionally, a case study describing expected and realized energy savings of completed retrofit measures of one of the homes is described in this paper.

Jackson, Roderick K [ORNL; Boudreaux, Philip R [ORNL; Kim, Eyu-Jin [Southface Energy Institute; Roberts, Sydney [Southface Energy Institute

2012-01-01T23:59:59.000Z

117

Thinking Like a Whole Building: Whole Foods Market New Construction Summary, U.S. Department of Energy's Commercial Building Partnerships (Fact Sheet)  

SciTech Connect

Whole Foods Market participates in the U.S. Department of Energy's Commercial Building Partnerships (CBP) to identify and develop cost-effective, readily deployed, replicable energy efficiency measures (EEMs) for commercial buildings. Whole Foods Market is working with the National Renewable Energy Laboratory (NREL) on a retrofit and a new construction CBP project. Whole Foods Market's CBP new construction project is a standalone store in Raleigh, North Carolina. Whole Foods Market examined the energy systems and the interactions between those systems in the design for the new Raleigh store. Based on this collaboration and preliminary energy modeling, Whole Foods Market and NREL identified a number of cost-effective EEMs that can be readily deployed in other Whole Foods Market stores and in other U.S. supermarkets. If the actual savings in the Raleigh store - which NREL will monitor and verify - match the modeling results, each year this store will save nearly $100,000 in operating costs (Raleigh's rates are about $0.06/kWh for electricity and $0.83/therm for natural gas). The store will also use 41% less energy than a Standard 90.1-compliant store and avoid about 3.7 million pounds of carbon dioxide emissions.

Not Available

2011-04-01T23:59:59.000Z

118

Hydronic Heating Retrofits for Low-Rise Multifamily Buildings - Phase 1: Boiler Control Replacement and Monitoring  

SciTech Connect

The ARIES Collaborative, a Department of Energy Building America research team, partnered with NeighborWorks America affiliate Homeowners' Rehab Inc. (HRI) of Cambridge, MA to implement and study improvements to the heating system in one of the non-profit's housing developments. The heating control systems in the 42-unit Columbia CAST housing development were upgraded in an effort projected to reduce heating costs by 15 to 25 percent.

Dentz, J.; Henderson, H.

2012-04-01T23:59:59.000Z

119

Experimental Tests of a Real Building Seismically Retrofitted by Special Buckling-Restrained Braces  

SciTech Connect

Buckling Restrained Braces (BRBs), differently from conventional braces, do not exhibit appreciable difference between the tensile and compression capacity and no strength degradation of brace capacity under compressive and cyclic loading. Since lateral and local buckling behaviour modes are restrained, large inelastic capacities are attainable. Hence, BRBs may represent an efficient and reliable solution for reducing the seismic vulnerability of buildings. Results of experimental tests on the response of a real two-story reinforced concrete (RC) building equipped with BRBs are presented and discussed. The considered BRBs are a special 'only-steel' version of the more common 'unbonded braces'. In particular, two different BRBs have been tested. Both of them are detachable 'only-steel' devices, consisting in a rectangular steel plate and a restraining steel sleeve. The latter is composed by two omega shapes which are bolted together. The main characteristic of the braces consists in the possibility to hide them within the space between the facing and the backing of masonry infill walls commonly used for RC buildings.

D'Aniello, Mario; Della Corte, Gaetano; Mazzolani, Federico M. [University of Naples Federico II, Dept. of Structural Engineering-Naples (Italy)

2008-07-08T23:59:59.000Z

120

Photovoltaics for Buildings: Key Issues in Pursuit of Market Readiness  

SciTech Connect

The photovoltaic (PV) industry is rapidly beginning to recognize the market potential of the buildings sector. New PV-for-buildings products have recently become commercially available, and numerous products that are under development will be introduced within the next 5 years. To ensure that these new products will be adopted and used in common building practices, the PV industry should recognize and address important buildings industry issues. These issues include building codes and standards, after-market servicing, education, and warranties and insurance policies. Photovoltaic systems are also still very expensive. The simplest method for increasing their value for a building is to decrease the building's electrical loads through energy efficiency and conservation. Meeting these goals can only be accomplished through partnerships with the U.S. Department of Energy (DOE), private industry, and public institutions.

Hayter, S. J.

1998-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Photovoltaics for Buildings: Key Issues in Pursuit of Market Readiness  

DOE Green Energy (OSTI)

The photovoltaic (PV) industry is rapidly beginning to recognize the market potential of the buildings sector. New PV-for-buildings products have recently become commercially available, and numerous products that are under development will be introduced within the next 5 years. To ensure that these new products will be adopted and used in common building practices, the PV industry should recognize and address important buildings industry issues. These issues include building codes and standards, after-market servicing, education, and warranties and insurance policies. Photovoltaic systems are also still very expensive. The simplest method for increasing their value for a building is to decrease the building's electrical loads through energy efficiency and conservation. Meeting these goals can only be accomplished through partnerships with the U.S. Department of Energy (DOE), private industry, and public institutions.

Hayter, S. J.

1998-10-31T23:59:59.000Z

122

Building America Expert Meeting Final Report: Multifamily Hydronic and Steam Heating Controls and Distribution Retrofits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hydronic Hydronic Heating in Multifamily Buildings Jordan Dentz The ARIES Collaborative October 2011 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation,

123

Assessment of Solar Energy Conversion Technologies-Application of Thermoelectric Devices in Retrofit an Office Building  

E-Print Network (OSTI)

Thermo electric (TE) devices offer an opportunity to introduce renewable energy into existing and new buildings. TE devices harvest energy from the temperature differential between the hot and cold side of a semiconductor material. In this study, the feasibility of integration of TE devices using the model of a generic enclosure will be explored. Some of these applications will involve the use of these devices as heat exchangers. However, these devices will be examined for their use in harvesting energy to provide the electric service for an office. Since demanded energy for some electronic devices can be generated directly, provided energy has the potential to take those loads off from the distribution. Besides, generated electricity expected to be replaced a greater amount of grid electricity for the periods when TE is generating. This paper represents a critical step for performing an analysis of using the proposed TE system in an office.

Azarbayjani, M.; Anderson, J.

2008-12-01T23:59:59.000Z

124

Bay Ridge Gardens - Mixed Humid Affordable Multifamily Housing Deep Energy Retrofit, Annapolis, Maryland (Fact Sheet), Building America Case Study: Efficient Solutions for New and Existing Homes, Building Technologies Office (BTO)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bay Ridge Gardens-Mixed Bay Ridge Gardens-Mixed Humid Affordable Multifamily Housing Deep Energy Retrofit Annapolis, Maryland PROJECT INFORMATION Construction: Existing Type: Apartment building: Bay Ridge Gardens Annapolis, MD www.bayridgegardens.com Size: 12 apartment units, 713 ft 2 and 909 ft 2 each Year of construction: 1970s Date completed: 2013 Climate Zone: Mixed-humid PERFORMANCE DATA Pre-retrofit annual energy use (normalized): 28.4 kilowatt-hour per square foot (kWh/ft 2 ) Post-retrofit annual energy use (normalized): 16.3 kWh/ft 2 Percent energy savings: 43% Incremental cost of energy efficiency measures: $85,996 Monetized annual energy savings: $6,900 Savings to Investment Ratio: 1.1 Significant energy savings-43% in this case-are possible in older multifamily

125

SPP marketing flyer for retail | ENERGY STAR Buildings & Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

marketing flyer for retail marketing flyer for retail Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder

126

Strategy Guideline: Mitigation of Retrofit Risk Factors  

SciTech Connect

The Alliance for Residential Building Innovation (ARBI) is currently developing strategies designed to promote and achieve increased energy savings and promote upgrades in the residential retrofit sector. These strategies are targeted to retrofit program managers, retrofit contractors, policy makers, academic researchers, and non-governmental organizations. This report focuses on four key areas to promote home energy upgrades: fostering accurate energy savings projections; understanding consumer perceptions for energy savings; measuring energy savings, and ensuring quality control for retrofit installations.

Berman, M.; Smith, P.; Porse, E.

2012-12-01T23:59:59.000Z

127

Rehabilitating missing energy use and weather data when determining retrofit energy savings in commercial buildings  

E-Print Network (OSTI)

This thesis evaluates four methods for rehabilitating short periods of missing data. Single variable regression, polynomial models, Lagrange interpolation, and linear interpolation models are developed, demonstrated, and used to fill 1-6 hour gaps in weather data, heating data and cooling data for commercial buildings. The methodology for comparing the performance of the four different methods for filling data gaps uses 11 one-year data sets to develop different models and fill over 250,000 "pseudo-gaps'' which are created by assuming data is missing and then comparing the "filled'' values with the measured values. The major findings may be summarized as follows: 1. It was also found that different data types have different gap frequency distributions. Data gaps of 1-6 hours cover all missing NWS temperature and dew point data. One to six hour gaps also cover 50-70% of the total missing LO-STAR temperature and humidity data, and 50-70% of total missing LO-STAR energy use such as cooling, heating, motor control use and electricity data. 2. The polynomial model and the linear interpolation model are comparable and more accurate than other models. The linear interpolation model is slightly better than the polynomial model for filling both missing weather data gaps and missing cooling data gaps. The least accurate is the Lagrange model, particularly as the length of the data gap increases. The single variable regression (SVR) method can not deal with missing weather data due to the pattern of weather data. Based on these findings, a polynomial model with hour-of-day as an independent variable and a linear interpolation model are recommended to fill 1-6 hour data gaps in cooling, heating and weather data.

Chen, Hui

1999-01-01T23:59:59.000Z

128

Evaluation of Two CEDA Weatherization Pilot Implementations of an Exterior Insulation and Over-Clad Retrofit Strategy for Residential Masonry Buildings in Chicago  

SciTech Connect

This project examines the implementation of an exterior insulation and over-clad strategy for brick masonry buildings in Chicago. The strategy was implemented at a free-standing two story two-family dwelling and a larger free-standing multifamily building. The test homes selected for this research represent predominant housing types for the Chicago area. High heating energy use typical in these buildings threaten housing affordability. Uninsulated mass masonry wall assemblies also have a strongly detrimental impact on comfort. Significant changes to the performance of masonry wall assemblies is generally beyond the reach of typical weatherization (Wx) program resources. The Community and Economic Development Association of Cook County, Inc. (CEDA) has secured a Sustainable Energy Resources for Consumers (SERC) innovation grant sponsored by the United States Department of Energy (DOE). This grant provides CEDA the opportunity to pursue a pilot implementation of innovative approaches to retrofit in masonry wall enclosures. The exterior insulation and over-clad strategy implemented through this project was designed to allow implementation by contractors active in CEDA weatherization programs and using materials and methods familiar to these contractors. The retrofit measures are evaluated in terms of feasibility, cost and performance. Through observations of the strategies implemented, the research described in this report identifies measures critical to performance as well as conditions for wider adoption. The research also identifies common factors that must be considered in determining whether the exterior insulation and over-clad strategy is appropriate for the building.

Neuhauser, K.

2013-08-01T23:59:59.000Z

129

High-tech buildings - Market transformation project  

SciTech Connect

Facility managers and designers know their buildings are energy intensive yet have few techniques to quantify cleanroom energy performance. Benchmarking identifies the energy end uses in a cleanroom. As expected, besides the process loads, which are often very intense, the mechanical systems are the most energy intensive in these buildings. Benchmarking the mechanical systems and components can provide useful information on system and component performance and provide a basis to identify energy-saving opportunities in cleanrooms. HVAC systems in cleanrooms are dramatically different from their counterparts in commercial buildings in terms of reliability, safety requirements, and scale. The design of cleanroom HVAC systems is a specialty area requiring unique understanding of cleanliness guidelines, airflow quantities, room pressurization, code requirements, specialty equipment, tight control, and many more details. The HVAC systems must also operate reliably and safely. Since recirculation air systems use large amounts of fan power in moving large amounts of conditioned air through HEPA filters, the cleanroom, and return pathways they represent one of the largest energy end uses in a cleanroom. In addition, many processes requiring cleanrooms also have large make-up and exhaust airflow needs requiring huge amounts of energy to move and condition the displaced air. Energy intensity for mechanical systems in cleanrooms ranges between 4 to 100 times that of commercial buildings. There is, however, a lack of comparative data on the performance of cleanroom mechanical systems. To better understand existing cleanroom systems in high technology industries, and to better enable building owners, operators, and designers to compare energy use for a given cleanroom to others, it is necessary to benchmark energy performance in such facilities.

Applications Team

2001-10-01T23:59:59.000Z

130

Identification of Market Requirements of Smart Buildings Technologies for High Rise Office Buildings  

E-Print Network (OSTI)

This paper reports the findings on the identification of market requirements of smart buildings technologies for high rise office buildings in Saudi Arabia including: levels of importance of smart building technologies for office buildings, current practices of utilizing hi-tech smart building technologies in office buildings, required additional features of smart building technologies for office buildings, challenges for integrating smart building technologies for office buildings, major benefits of hi-tech smart buildings technologies for office buildings, and priorities of smart building technologies based on current usage. The paper also reports on key parameters of the comparison of smart office building technologies between Saudi Arabia and developed countries which are based on the survey results for the former and literature review for the latter. This comparison provides in a nutshell a conclusion of the complete survey analysis conducted in this research and at the same time provides an indication on the utilization level of smart office buildings in Saudi Arabia compared to the current practices in developed countries.

Reffat, R. M.

2010-01-01T23:59:59.000Z

131

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance; Grocery Stores (Revised) (Book)  

SciTech Connect

The U.S. Department of Energy developed the Advanced Energy Retrofit Guides (AERGs) to provide specific methodologies, information, and guidance to help energy managers and other stakeholders successfully plan and execute energy efficiency improvements. Detailed technical discussion is fairly limited in these guides. Instead, we emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluations of the most promising retrofit measures for each building type. A series of AERGs is under development, addressing key segments of the commercial building stock. Grocery stores were selected as one of the highest priority sectors, because they represent one of the most energy-intensive market segments.

Hendron, B.

2013-07-01T23:59:59.000Z

132

Service and product provider's marketing toolkit | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Service and product provider's marketing toolkit Service and product provider's marketing toolkit Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In this section How can ENERGY STAR help your business? Get started Join ENERGY STAR as a partner ENERGY STAR service & product provider training series Service and product provider's marketing toolkit Industry initiatives ENERGY STAR sales tools for service and product providers

133

EMCS Retrofit Analysis - Interim Report  

SciTech Connect

This report presents the interim results of analyses carried out in the Phillip Burton Federal Building in San Francisco from 1996 to 1998. The building is the site of a major demonstration of the BACnet communication protocol. The energy management and control systems (EMCS) in the building were retrofitted with BACnet compatible controllers in order to integrate certain existing systems on one common network. In this respect, the project has been a success. Interoperability of control equipment from different manufacturers has been demonstrated in a real world environment. Besides demonstrating interoperability, the retrofits carried out in the building were also intended to enhance control strategies and capabilities, and to produce energy savings. This report presents analyses of the energy usage of HVAC systems in the building, control performance, and the reaction of the building operators. The report does not present an evaluation of the performance capabilities of the BACnet protocol. A monitoring system was installed in the building that parallels many of the EMCS sensors and data were archived over a three-year period. The authors defined pre-retrofit and post-retrofit periods and analyzed the corresponding data to establish the changes in building performance resulting from the retrofit activities. The authors also used whole-building energy simulation (DOE-2) as a tool for evaluating the effect of the retrofit changes. The results of the simulation were compared with the monitored data. Changes in operator behavior were assessed qualitatively with questionnaires. The report summarizes the findings of the analyses and makes several recommendations as to how to achieve better performance. They maintain that the full potential of the EMCS and associated systems is not being realized. The reasons for this are discussed along with possible ways of addressing this problem. They also describe a number of new technologies that could benefit systems of the type found in the Philip Burton Federal Building.

Diamond, R.C.; Salsbury, T.I.; Bell, G.C.; Huang, Y.J.; Sezgen, A.O.; Mazzucchi, R.; Romberger, J.

1999-03-01T23:59:59.000Z

134

Progress in Residential Retrofit  

NLE Websites -- All DOE Office Websites (Extended Search)

The Cutting Edge: Progress in Residential Retrofit The Cutting Edge: Progress in Residential Retrofit A geographic representation of saturations of ceiling fans based on data from the RASSes. White areas indicate a lack of data for that region. Many utilities survey their customers to learn more about the buildings and the occupants in their service areas. These surveys-usually called "residential appliance saturation surveys," or RASSes-ask for the number and types of appliances present, the number of people living in the home, and sometimes personal information. The RASSes are also used to collect information about the presence of conservation measures such as wall and ceiling insulation, weatherstripping, multipane windows, and water flow restrictors. Building Energy Analysis Group researchers Alan Meier and Brian Pon gathered RASSes

135

Frequency Monitoring and Simulation Analysis for Historical Structures Being Retrofitted  

Science Conference Proceedings (OSTI)

Many historical structures now need to be retrofitted to meet the requirements of fast developing cities. To ensure the safety of a historical masonry building during its retrofitting, natural frequency of the structure was measured through ambient vibrating ... Keywords: Historical masonry building, Retrofit, Monitoring, Simulation

Chao Wang, Bin Peng, Peng Wang

2013-01-01T23:59:59.000Z

136

Capacity Building in Sharing Forest and Market Information Prague & Krtiny, Czech Republic, 25 October 2005  

E-Print Network (OSTI)

Capacity Building in Sharing Forest and Market Information Prague & Krtiny, Czech Republic, 25 Information Prague & Krtiny, Czech Republic, 25 October 2005 F A O Contents I. Forest products markets forest products market information #12;Capacity Building in Sharing Forest and Market Information Prague

137

Analyzing Principal-Agent Problem on Energy Use and Energy Efficiency Retrofit from selected Governmental Buildings in Beijing  

E-Print Network (OSTI)

Governmental Buildings in Beijing Zhijun Liu University of California, Davis 03/19/2010 #12;2 1. Introduction 2004 energy statistic data, building consumed 25.5% of the total national energy, and it was estimated that building has the greatest potential for energy conservation. Though the average building energy consumption

California at Davis, University of

138

Retrofit regenerator package  

SciTech Connect

Potential fuel savings by retrofitting gas turbines with regeneration units are discussed. Thomassen U.S. is making the retrofit available.

1983-03-01T23:59:59.000Z

139

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

BUILDING TECHNOLOGIES PROGRAM Advanced Energy Retrofit Guide Practical Ways to Improve Energy Performance Grocery Stores In collaboration with: Prepared by: National Renewable...

140

Integrated Energy Systems (IES) for Buildings: A Market Assessment  

DOE Green Energy (OSTI)

Integrated Energy Systems (IES) combine on-site power or distributed generation technologies with thermally activated technologies to provide cooling, heating, humidity control, energy storage and/or other process functions using thermal energy normally wasted in the production of electricity/power. IES produce electricity and byproduct thermal energy onsite, with the potential of converting 80 percent or more of the fuel into useable energy. IES have the potential to offer the nation the benefits of unprecedented energy efficiency gains, consumer choice and energy security. It may also dramatically reduce industrial and commercial building sector carbon and air pollutant emissions and increase source energy efficiency. Applications of distributed energy and Combined heat and power (CHP) in ''Commercial and Institutional Buildings'' have, however, been historically limited due to insufficient use of byproduct thermal energy, particularly during summer months when heating is at a minimum. In recent years, custom engineered systems have evolved incorporating potentially high-value services from Thermally Activated Technologies (TAT) like cooling and humidity control. Such TAT equipment can be integrated into a CHP system to utilize the byproduct heat output effectively to provide absorption cooling or desiccant humidity control for the building during these summer months. IES can therefore expand the potential thermal energy services and thereby extend the conventional CHP market into building sector applications that could not be economically served by CHP alone. Now more than ever, these combined cooling, heating and humidity control systems (IES) can potentially decrease carbon and air pollutant emissions, while improving source energy efficiency in the buildings sector. Even with these improvements over conventional CHP systems, IES face significant technological and economic hurdles. Of crucial importance to the success of IES is the ability to treat the heating, ventilation, air conditioning, water heating, lighting, and power systems loads as parts of an integrated system, serving the majority of these loads either directly or indirectly from the CHP output. The CHP Technology Roadmaps (Buildings and Industry) have focused research and development on a comprehensive integration approach: component integration, equipment integration, packaged and modular system development, system integration with the grid, and system integration with building and process loads. This marked change in technology research and development has led to the creation of a new acronym to better reflect the nature of development in this important area of energy efficiency: Integrated Energy Systems (IES). Throughout this report, the terms ''CHP'' and ''IES'' will sometimes be used interchangeably, with CHP generally reserved for the electricity and heat generating technology subsystem portion of an IES. The focus of this study is to examine the potential for IES in buildings when the system perspective is taken, and the IES is employed as a dynamic system, not just as conventional CHP. This effort is designed to determine market potential by analyzing IES performance on an hour-by-hour basis, examining the full range of building types, their loads and timing, and assessing how these loads can be technically and economically met by IES.

LeMar, P.

2002-10-29T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Topic 14. Retrofit and optimal operation of the building energy systems Performances of Low Temperature Radiant Heating Systems  

E-Print Network (OSTI)

panel system are given by its energy (the consumption of gas for heating, electricity for pumps for residential buildings are increasingly used. According to some studies, this figure exceeds 50% (Kilkis et al of new calculation methods. However, in terms of heat transfer modelling, there are several analytical

Paris-Sud XI, Université de

142

Advanced Energy Retrofit Guides | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofit Guides Retrofit Guides Advanced Energy Retrofit Guides Photo of the cover of the Advanced Energy Retrofit Guide for Healthcare Facilities. The Advanced Energy Retrofit Guides (AERGs) were created to help decision makers plan, design, and implement energy improvement projects in their facilities. With energy managers in mind, they present practical guidance for kick-starting the process and maintaining momentum throughout the project life cycle. These guides are primarily reference documents, allowing energy managers to consult the particular sections that address the most pertinent topics.. Useful resources are also cited throughout the guides for further information. Each AERG is tailored specifically to the needs of a specific building type, with an emphasis on the most effective

143

Better Buildings Neighborhood Program: Step 1: Assess the Market  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency and Renewable Energy EERE Home | Programs & Offices | Consumer Information Better Buildings Neighborhood Program Search Search Help Better Buildings...

144

Integrated Energy Systems (IES) for Buildings: A Market Assessment(LeMar  

Open Energy Info (EERE)

Integrated Energy Systems (IES) for Buildings: A Market Assessment(LeMar Integrated Energy Systems (IES) for Buildings: A Market Assessment(LeMar 2002) Home > Groups > Energy Systems Integration Qinsun's picture Submitted by Qinsun(35) Member 15 November, 2012 - 13:05 Literature Review The author analyzed the market of combine heat and power in commercial buildings. The paper provided the market size of CHP. It analyzed the reduction of emission, energy and cost by 2020. It discussed barrier, market power and impact. It is a good market analysis proach. However, it only considered existing CHP techniques in Commercial buildings. Groups: Energy Systems Integration Login to post comments Latest documents Qinsun Research topics related to ESI Posted: 15 Nov 2012 - 13:55 by Qinsun Qinsun Prospects for Nuclear Power(Davis 2012) Posted: 15 Nov 2012 - 13:36 by Qinsun

145

Field Test Evaluation of Conservation Retrofits of Low-Income, Single-Family Buildings in Wisconsin: Audit Field Test Implementation and Results  

SciTech Connect

This report describes the field test of a retrofit audit. The field test was performed during the winter of 1985-86 in four South Central Wisconsin counties. The purpose of the field test was to measure the energy savings and cost effectiveness of the audit-directed retrofit program for optimizing the programs benefit-to-cost ratio. The audit-directed retrofit program is described briefly in this report and in more detail by another report in this series (ORNL/CON-228/P3). The purpose of this report is to describe the methods and results of the field test. Average energy savings of the 20 retrofitted houses are likely (0.90 probability) to lie between 152 and 262 therms/year/house. The most likely value of the average savings is 207 therms/year/house. These savings are significantly (p < .05) smaller than the audit-predicted savings (286 therms/year/house). Measured savings of individual houses were significantly different than predicted savings for half of the houses. Each house received at least one retrofit. Thirteen of the 20 retrofitted houses received a new condensing furnace or blown-in wall insulation; all but two of the houses received one or more minor retrofits. The seven houses which received condensing furnaces saved, on average, about as much as predicted, but three of the seven houses had significantly more or less savings than predicted. The six houses which received wall insulation saved, on average, about half as much as predicted. The remaining houses which received only minor retrofits saved, on average, less than predicted, but the difference was not significant. Actual retrofit costs were close to expected costs. Overall measured energy savings averaged 15 therms/year per hundred retrofit dollars invested. Houses which received wall insulation or a condensing furnace did slightly better, and the houses which received only minor retrofits did poorly. When estimated program costs were included, average savings dropped to about 13 therms/year/per hundred dollars. The uncertainty associated with the energy savings means that these comparisons of savings and costs also have large uncertainties.

McCold, L.N.

1988-01-01T23:59:59.000Z

146

Retrofitting Doors on Open Refrigerated Cases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofitting Doors on Open Retrofitting Doors on Open Refrigerated Cases William Goetzler Navigant Consulting, Inc. wgoetzler@navigant.com (781) 270-8351 April 4, 2013 BBA Refrigeration Project Team Images courtesy of REMIS AMERICA, LLC. 2 | Building Technologies Office eere.energy.gov Technology Overview Image from Investigation of Energy- Efficient Supermarket Display Cases. 2004, Oak Ridge National Laboratory. Background and Motivation * Adding doors to open cases (retrofits) greatly reduces cold air loss - 50-80% load reduction - Load reduction = system energy savings

147

Solid-State Lighting: Retrofit Financial Analysis Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Market-Based Programs Printable Version Share this resource Send a link to Solid-State Lighting: Retrofit Financial Analysis Tool to someone by E-mail Share Solid-State Lighting: Retrofit Financial Analysis Tool on Facebook Tweet about Solid-State Lighting: Retrofit Financial Analysis Tool on Twitter Bookmark Solid-State Lighting: Retrofit Financial Analysis Tool on Google Bookmark Solid-State Lighting: Retrofit Financial Analysis Tool on Delicious Rank Solid-State Lighting: Retrofit Financial Analysis Tool on Digg Find More places to share Solid-State Lighting: Retrofit Financial Analysis Tool on AddThis.com... LED Lighting Facts CALiPER Program Standards Development Technical Information Network Gateway Demonstrations Municipal Consortium About the Consortium FAQs

148

Applications of sustainable technology to retrofits in urban areas  

E-Print Network (OSTI)

Energy Losses from old buildings comprise a significant percentage of the total residential energy consumption in the United States. Retrofitting buildings for conservation can greatly decrease the present energy demand ...

Taylor, Paki (Paki A.), 1974-

2001-01-01T23:59:59.000Z

149

Energy Factors, Leasing Structure and the Market Price of Office Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Factors, Leasing Structure and the Market Price of Office Buildings Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S. Speaker(s): Nancy Wallace Date: June 15, 2011 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Paul Mathew The talk will cover the results from an empirical paper that analyzes the relationship between energy factor markets, leasing structures and the transaction prices of office buildings in the {U.S.} We employ a large sample of 15,133 office building transactions that occurred between 2001 and 2010. In addition to building characteristics, we also include information on the operating expenses, the net operating income, and the market capitalization rates at sale to estimate an asset pricing model for commercial office real estate assets. A further set of important controls

150

Retrofit Energy Savings Estimation Model | Open Energy Information  

Open Energy Info (EERE)

Retrofit Energy Savings Estimation Model Retrofit Energy Savings Estimation Model Jump to: navigation, search Tool Summary Name: Retrofit Energy Savings Estimation Model Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Energy Focus Area: Buildings Topics: Resource assessment Resource Type: Software/modeling tools User Interface: Desktop Application Website: btech.lbl.gov/tools/resem/resem.htm Cost: Free Language: English References: Retrofit Energy Savings Estimation Model[1] Logo: Retrofit Energy Savings Estimation Model RESEM, the Retrofit Energy Savings Estimation Model, is a PC-based tool designed to allow Department of Energy (DOE) Institutional Conservation Program (ICP) staff and participants to reliably determine the energy savings directly caused by ICP-supported retrofit measures implemented in a

151

Building-integrated photovoltaics (BIPV): Analysis and US market potential. Final report  

DOE Green Energy (OSTI)

Arthur D. Little, Inc., in conjunction with Solar Design Associates, conducted a study for the US Department of Energy (DOE), Office of Building Technologies (OBT) to determine the market potential for grid-connected, building-integrated photovoltaics (BIPV). This study defines BIPV as two types of applications: (1) where the PV modules are an integral part of the building, often serving as the exterior weathering skin; and (2) the PV modules are mounted on the existing building exterior. Both of these systems are fully integrated with the energy usage of the building and have potential for significant market penetration in the US. Off-grid building applications also offer a near-term market for BIPV, but are not included in the scope of this study.

Frantzis, L.; Friedman, D.; Hill, S.; Teagan, P. [Little (Arthur D.), Inc., Cambridge, MA (United States); Strong, S.; Strong, M. [Solar Design Associates, Harvard, MA (United States)

1995-02-01T23:59:59.000Z

152

Building Technologies Office: Qualified Software for Calculating...  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations & Maintenance Retrofit Existing Buildings Find Financing for Upgrades State & Local Incentives Tax Incentives Activities Partner with DOE Commercial Buildings...

153

Building Technologies Office: Bookmark Notice  

NLE Websites -- All DOE Office Websites (Extended Search)

in Commercial Buildings Commercial Building Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Energy Asset Score Building...

154

DOE Announces Webinars on the Distributed Wind Power Market,...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofits Financial Analysis Tool, and More DOE Announces Webinars on the Distributed Wind Power Market, Lighting Retrofits Financial Analysis Tool, and More August 16, 2013 -...

155

Minimizing Building Electricity Costs in a Dynamic Power Market: Algorithms and Impact on Energy Conservation  

E-Print Network (OSTI)

Minimizing Building Electricity Costs in a Dynamic Power Market: Algorithms and Impact on Energy of Computing, The Hong Kong Polytechnic University, Hong Kong, P. R. China 2 Department of Electrical and the electricity bills nowa- days are leading to unprecedented costs. Electricity price is market-based and dynamic

Wang, Dan

156

Marketing the Klamath Falls Geothermal District Heating system  

DOE Green Energy (OSTI)

The new marketing strategy for the Klamath Falls system has concentrated on offering the customer an attractive and easy to understand rate structure, reduced retrofit cost and complexity for his building along with an attractive package of financing and tax credits. Initial retrofit costs and life-cycle cost analysis have been conducted on 22 buildings to date. For some, the retrofit costs are simply too high for the conversion to make sense at current geothermal rates. For many, however, the prospects are good. At this writing, two new customers are now connected and operating with 5 to 8 more buildings committed to connect this construction season after line extensions are completed. This represents nearly a 60% increase in the number of buildings connected to the system and a 40% increase in system revenue.

Rafferty, K.

1993-06-01T23:59:59.000Z

157

Evaluation of passive solar retrofit options  

DOE Green Energy (OSTI)

An evaluation framework has been developed which allows for the assessment of the role of passive solar retrofit in the nationwide reduction of conventional fuel use. Three types of analysis are proposed within this framework: the physical/technical capability of the present housing stock to incorporate passive solar retrofit; the economic feasibility of the application of retrofit designs; and the actual market potential or acceptance of these alternative retrofit options. Each type of analysis has specific data requirements and a series of evaluation procedures to help establish estimates of the potential for passive solar retrofit in the present housing stock. The data requirements with their respective sources and evaluation procedures for the first two types of analysis-physical/technical setting and economic feasibility, are examined. A distinction is drawn between community specific case studies and more generalized national assessments. Information derived from these three types of analysis, whether case specific or national in scope, can then be used in an evaluation of potential economic impacts. The establishment of regional economic benefits and costs werve as a measure of the merit or attractiveness of the implementation of a passive solar retrofit program.

Ben-David, S.; Kirchemen, C.; Martin, S.; Noll, S.; Roach, F.

1980-01-01T23:59:59.000Z

158

February 13, 2013 Webinar: Preliminary Process and Market Evaluation Â… Better Buildings Neighborhood Program Webcast  

NLE Websites -- All DOE Office Websites (Extended Search)

Preliminary Process and Market Evaluation - Better Buildings Neighborhood Program Webcast Preliminary Process and Market Evaluation - Better Buildings Neighborhood Program Webcast February 13, 2013 Ed Vine: Hello everyone and good afternoon. My name is Ed Vine and I am a staff scientist at Lawrence Berkeley National Laboratory, otherwise known as LBNL, and I'm the LBNL project manager for the evaluation of the Better Buildings Neighborhood Program. You may hear the term BBNP-it's a short- handed version for that. So thank you for joining us and welcome to today's webinar on the preliminary process and market evaluation of the BBNP. This evaluation addresses the national program with a goal of identifying what elements of grantee programs are most successful at bringing about market changes that will result in sustainable energy savings. The study provides a preliminary assessment focused on

159

Building Energy Software Tools Directory: Autodesk Green Building...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Simulation Load Calculation Renewable Energy Retrofit Analysis SustainabilityGreen Buildings Codes & Standards Materials, Components, Equipment, & Systems Other...

160

Energy Market Profiles: Hospital Buildings, Equipment, and Energy Use  

Science Conference Proceedings (OSTI)

This report profiles the U.S. healthcare market on size and energy-related characteristics and provides energy benchmarking data that can be used to make meaningful comparisons between healthcare facilities. The intent of the report is to provide both utility and hospital managers with a better understanding of the key characteristics of the healthcare market and enhance their abilities to assess how well their facilities are performing relative to hospitals with similar energy equipment.

1999-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Residential Retrofits in the Southeast: A Performance Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Retrofits in Residential Retrofits in the Southeast: A Performance Update Roderick K. Jackson Ph.D Oak Ridge National Laboratory for Building America Stakeholder Meeting 3/1/2012 2 Managed by UT-Battelle for the U.S. Department of Energy Project Goals 1. Can we retrofit existing homes to achieve energy savings of more than 30% 2. Can we cost effectively retrofit existing homes to achieve energy savings of more than 30% 3. Will homeowners pay for retrofits that achieve energy savings of more than 30% 4. Will reality (i.e. utility bills) match the projected energy savings * In the event any of the answers to questions 1-4 is NO, what are obstacles to YES 3 Managed by UT-Battelle for the U.S. Department of Energy Project Overview Nine homes received retrofits with projected source energy

162

Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S. ?  

E-Print Network (OSTI)

This paper presents an empirical analysis of the relationship between energy factor markets, leasing structures and the transaction prices of office buildings in the U.S. We employ a large sample of 15,133 office building transactions that occurred between 2001 and 2010. In addition to building characteristics, we also include information on the operating expenses, the net operating income, and the market capitalization rates at sale to estimate an asset pricing model for commercial office real estate assets. A further set of important controls in our analysis is the one-to-twelve month forward contract prices and the shape of the forward contract price curve, using auction data for the regional electricity trading hubs in which the building is located and auction data from the Henry Hub for natural gas. We also include weather metrics in the form of the variance in the last twelve months of minimum and maximum temperature and precipitation for each building’s location and sale date. Our final set of controls includes information on the dominant contractual leasing structure of the buildings. Our empirical results suggest that Energy Star labels do not explain additional variance in property prices once the key asset pricing factors of expenses, income and market capitalization rates are included. Energy factor market prices, the shape of the energy forward price curves, and weather metrics are consistently shown to be statistically significant determinants of office building transaction prices, suggesting that commercial office building prices are likely to be exposed to shocks in these markets.

Dwight Jaffee; Richard Stanton; Nancy Wallace

2011-01-01T23:59:59.000Z

163

SPP marketing flyer for healthcare | ENERGY STAR Buildings & Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

healthcare healthcare Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder Technical documentation

164

SPP marketing flyer for energy information services | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

energy information services energy information services Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder

165

Sustainable systems rating program: Marketing ``Green`` Building in Austin, Texas  

Science Conference Proceedings (OSTI)

Four major resource issues for home construction were identified: water, energy, materials, and waste. A systems flow model was then developed that tracked the resource issues through interactive matrices in the areas of sourcing, processing, using, and disposing or recycling. This model served as the basis for a rating system used in an educational and marketing tool called the Eco-Home Guide.

Not Available

1991-12-01T23:59:59.000Z

166

Sustainable systems rating program: Marketing Green'' Building in Austin, Texas  

SciTech Connect

Four major resource issues for home construction were identified: water, energy, materials, and waste. A systems flow model was then developed that tracked the resource issues through interactive matrices in the areas of sourcing, processing, using, and disposing or recycling. This model served as the basis for a rating system used in an educational and marketing tool called the Eco-Home Guide.

Not Available

1991-12-01T23:59:59.000Z

167

Byggmeister Test Home: Analysis and Initial Results of Cold Climate Wood-Framed Home Retrofit  

SciTech Connect

BSC seeks to further the energy efficiency market for New England area retrofit projects by supporting projects that are based on solid building science fundamentals and verified implementation. With the high exposure of energy efficiency and retrofit terminology being used in the general media at this time, it is important to have evidence that measures being proposed will in fact benefit the homeowner through a combination of energy savings, improved durability, and occupant comfort. There are several basic areas of research to which the technical report for these test homes can be expected to contribute. These include the combination of measures that is feasible, affordable and acceptable to homeowners as well as expectations versus results. Two Byggmeister multi-family test homes in Massachusetts are examined with the goal of providing case studies that could be applied to other similar New England homes.

Gates, C.

2013-01-01T23:59:59.000Z

168

Building Energy Software Tools Directory: Green Energy Compass  

NLE Websites -- All DOE Office Websites (Extended Search)

Whole Building Analysis Energy Simulation Load Calculation Renewable Energy Retrofit Analysis SustainabilityGreen Buildings Codes & Standards Materials, Components, Equipment, &...

169

Homeowner Best Practices Guide for Residential Retrofits  

SciTech Connect

This best practices guide for HV AC system retrofits is aimed at homeowners who want guidance on upgrading their heating, cooling and ventilation (HVAC) systems and integrating these upgrades with other changes to their home. It has been developed around the idea of having packages of changes to the building HV AC system and building envelope that are climate and house construction dependent. These packages include materials procedures and equipment, and are designed to remove some of the guesswork when selecting a builder, contractor, or installer. The packages are not meant to be taken as rigid requirements - instead they are systems engineered guidelines that form the basis for energy efficient retrofits. Similar approaches have been taken previously for new construction, where a systems engineering approach has been used to develop extremely energy-efficient homes that are comfortable safe and durable, and often cost less than standard construction. This approach is best epitomized by the Building America program, whose partners have built thousands of residences throughout the U.S. using these principles. The differences between retrofitting and new construction tend to limit the changes one can make to a building, so these packages rely on relatively simple and non-intrusive technologies and techniques. The retrofits also focus on changes to a building that will give many years of service to the occupants. Another key aspect of these best practices is that we need to know how a house is working so that we know what parts have the potential for improvement. To do this we have put together a set of simple tests that a homeowner can perform on their own together with checklists and questionnaires. The measured test results, observations and homeowner answers to questions are used to direct us towards the best retrofits applicable to each individual house. The retrofits will depend on the current condition of the building envelope and HV AC system, the local climate, the construction methods used for the house, and the presence of existing energy saving systems and/or materials. This is just like a doctor referring a patient for blood tests or x-rays before actually performing surgery. This way the doctor can be sure that he does the right thing. To take this analogy further - we can borrow from the medical profession and say that the first thought when retrofitting a house is to do no harm, i.e., do not make changes that could make the house worse to live in.

Walker, Iain S.

2005-09-01T23:59:59.000Z

170

Green Investment Horizons: Effects of Policy on the Market for Building  

Open Energy Info (EERE)

Green Investment Horizons: Effects of Policy on the Market for Building Green Investment Horizons: Effects of Policy on the Market for Building Energy Efficiency Technologies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Green Investment Horizons: Effects of Policy on the Market for Building Energy Efficiency Technologies Focus Area: Energy Efficiency Topics: Potentials & Scenarios Website: pdf.wri.org/working_papers/green_investment_horizons.pdf Equivalent URI: cleanenergysolutions.org/content/green-investment-horizons-effects-pol Language: English Policies: "Deployment Programs,Financial Incentives,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Demonstration & Implementation Regulations: "Building Codes,Emissions Standards,Energy Standards" is not in the list of possible values (Agriculture Efficiency Requirements, Appliance & Equipment Standards and Required Labeling, Audit Requirements, Building Certification, Building Codes, Cost Recovery/Allocation, Emissions Mitigation Scheme, Emissions Standards, Enabling Legislation, Energy Standards, Feebates, Feed-in Tariffs, Fuel Efficiency Standards, Incandescent Phase-Out, Mandates/Targets, Net Metering & Interconnection, Resource Integration Planning, Safety Standards, Upgrade Requirements, Utility/Electricity Service Costs) for this property.

171

Next-generation building energy management systems and implications for electricity markets.  

SciTech Connect

The U.S. national electric grid is facing significant changes due to aggressive federal and state targets to decrease emissions while improving grid efficiency and reliability. Additional challenges include supply/demand imbalances, transmission constraints, and aging infrastructure. A significant number of technologies are emerging under this environment including renewable generation, distributed storage, and energy management systems. In this paper, we claim that predictive energy management systems can play a significant role in achieving federal and state targets. These systems can merge sensor data and predictive statistical models, thereby allowing for a more proactive modulation of building energy usage as external weather and market signals change. A key observation is that these predictive capabilities, coupled with the fast responsiveness of air handling units and storage devices, can enable participation in several markets such as the day-ahead and real-time pricing markets, demand and reserves markets, and ancillary services markets. Participation in these markets has implications for both market prices and reliability and can help balance the integration of intermittent renewable resources. In addition, these emerging predictive energy management systems are inexpensive and easy to deploy, allowing for broad building participation in utility centric programs.

Zavala, V. M.; Thomas, C.; Zimmerman, M.; Ott, A. (Mathematics and Computer Science); (Citizens Utility Board); (BuildingIQ Pty Ltd, Australia); (PJM Interconnection LLC)

2011-08-11T23:59:59.000Z

172

Lighting Retrofit Study  

SciTech Connect

The Lighting Retrofit Study was an effort to determine the most cost-effective methods of retrofitting several configurations of lighting systems at Lawrence Berkeley Laboratory (LBL) and Lawrence Livermore National Laboratory (LLNL). We developed a test protocol to compare a variety of lighting technologies for their applicability in labs and offices and designed and constructed a novel lighting contrast potential meter to allow for comparison of lighting quality as well as quantity.

Kromer, S.; Morse, O.; Siminovitch, M.

1991-09-01T23:59:59.000Z

173

Retrofit Legislation at the Urban Level  

NLE Websites -- All DOE Office Websites (Extended Search)

Retrofit Legislation at the Urban Level Retrofit Legislation at the Urban Level In March, the city of Berkeley, California, passed new legislation that should serve as a model for local policies intended to keep energy dollars within the community while protecting the environment. The Commercial Energy Conservation Ordinance (CECO) is based on a similar ordinance that has been law since 1989 in San Francisco, Berkeley's neighbor across the Bay. San Francisco is currently the only other city in the world to have this type of legislation. As part of the Berkeley Municipal Code, CECO requires commercial buildings to undergo energy conservation retrofits when they are sold or substantially renovated. CECO was designed with the participation of LBL's Kristin Heinemeier, who also works with the Berkeley

174

Building Technologies Office: Commercial Building Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange...

175

Building Technologies Office: About the Buildings Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange...

176

Building Technologies Office: High Performance Green Building...  

NLE Websites -- All DOE Office Websites (Extended Search)

AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange...

177

Result of recent weatherization retrofit projects  

Science Conference Proceedings (OSTI)

Pacific Gas and Electric (PG and E) and the Bonneville Power Administration (BPA) have conducted studies in their respective service areas in order to evaluate the cost-effectiveness of certain conservation retrofits. Twenty houses in Walnut Creek, California, underwent an infiltration reduction program, similar to house doctoring. Ten of these houses also received additional contractor-installed measures. BPA retrofitted 18 houses at its Midway substation in central Washington. Retrofits made to the houses included: attic and crawlspace insulation, foundation sill caulking, storm windows and doors, increased attic ventilation, and infiltration reduction. Energy consumption and weather data were monitored before and after each set of retrofits in both projects. Leakage measurements were made by researchers from the Energy Efficient Buildings Program using blower door fan pressurization, thereby allowing calculation of heating season infiltration rates. An energy use model correlating energy consumption with outside temperature was developed in order to determine improvements to the thermal conductance of the building envelope as a result of the retrofits. Energy savings were calculated based on the results of the energy use model. As a check on these findings, the Computerized Instrumented Residential Audit (CIRA) load calculation program developed at Lawrence Berkeley Laboratory provided a theoretical estimate of the savings resulting from the retrofits. At Midway, storm windows and doors were found to save the most energy. Because the Midway houses were not very leaky at the beginning of the experiment, the infiltration reduction procedures were less effective than expected. In the Walnut Creek project, the infiltration reduction procedures did decrease the leakiness of the test houses, but the effect upon energy savings was not great.

Dickinson, J.B.; Lipschutz, R.D.; O'Regan, B.; Wagner, B.S.

1982-07-01T23:59:59.000Z

178

Method for Determining Optimal Residential Energy Efficiency Retrofit Packages  

SciTech Connect

Businesses, government agencies, consumers, policy makers, and utilities currently have limited access to occupant-, building-, and location-specific recommendations for optimal energy retrofit packages, as defined by estimated costs and energy savings. This report describes an analysis method for determining optimal residential energy efficiency retrofit packages and, as an illustrative example, applies the analysis method to a 1960s-era home in eight U.S. cities covering a range of International Energy Conservation Code (IECC) climate regions. The method uses an optimization scheme that considers average energy use (determined from building energy simulations) and equivalent annual cost to recommend optimal retrofit packages specific to the building, occupants, and location. Energy savings and incremental costs are calculated relative to a minimum upgrade reference scenario, which accounts for efficiency upgrades that would occur in the absence of a retrofit because of equipment wear-out and replacement with current minimum standards.

Polly, B.; Gestwick, M.; Bianchi, M.; Anderson, R.; Horowitz, S.; Christensen, C.; Judkoff, R.

2011-04-01T23:59:59.000Z

179

Advanced Sensors and Controls for Building Applications: Market Assessment and Potential R&D Pathways  

SciTech Connect

Significant energy savings can be achieved in commercial building operation, along with increased comfort and control for occupants, through the implementation of advanced technologies. This document provides a market assessment of existing building sensors and controls and presents a range of technology pathways (R&D options) for pursuing advanced sensors and building control strategies. This paper is actually a synthesis of five other white papers: the first describes the market assessment including estimates of market potential and energy savings for sensors and control strategies currently on the market as well as a discussion of market barriers to these technologies. The other four cover technology pathways: (1) current applications and strategies for new applications, (2) sensors and controls, (3) networking, security, and protocols and standards, and (4) automated diagnostics, performance monitoring, commissioning, optimal control and tools. Each technology pathway chapter gives an overview of the technology or application. This is followed by a discussion of needs and the current status of the technology. Finally, a series of research topics is proposed.

Brambley, Michael R.; Haves, Philip; McDonald, Sean C.; Torcellini, Paul; Hansen, David G.; Holmberg, David; Roth, Kurt

2005-04-13T23:59:59.000Z

180

Predicted Versus Actual Savings for a Low-Rise Multifamily Retrofit in Boulder, Colorado  

SciTech Connect

To determine the most cost-effective methods of improving buildings, accurate analysis and prediction of the energy use of existing buildings is essential. However, multiple studies confirm that analysis methods tend to over-predict energy use in poorly insulated, leaky homes and thus, the savings associated with improving those homes. In NREL's report titled 'Assessing and Improving the Accuracy of Energy Analysis of Residential Buildings,' researchers propose a method for improving the accuracy of residential energy analysis methods. A key step in this process involves the comparisons of predicted versus metered energy use and savings. In support of this research need, CARB evaluated the retrofit of a multifamily building in Boulder, CO. The updated property is a 37 unit, 2 story apartment complex built in 1950, which underwent renovations in early 2009 to bring it into compliance with Boulder, CO's SmartRegs ordinance. Goals of the study were to: 1) evaluate predicted versus actual savings due to the improvements, 2) identify areas where the modeling assumptions may need to be changed, and 3) determine common changes made by renters that would negatively impact energy savings. In this study, CARB seeks to improve the accuracy of modeling software while assessing retrofit measures to specifically determine which are most effective for large multifamily complexes in the cold climate region. Other issues that were investigated include the effects of improving building efficiency on tenant comfort, the impact on tenant turnover rates, and the potential market barriers for this type of community scale project.

Arena, L.; Williamson, J.

2013-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Building America Expert Meeting Report: Hydronic Heating in Multifamily Buildings  

SciTech Connect

The topic of this expert meeting was cost-effective controls and distribution retrofit options for hot water and steam space heating systems in multi-family buildings with the goals of reducing energy waste and improving occupant comfort. The U.S. Department of Energy's Building America program develops technologies with the goal of reducing energy use by 30% to 50% in residential buildings. Toward this goal, the program sponsors 'Expert Meetings' focused on specific building technology topics. The meetings are intended to sharpen Building America research priorities, create a forum for sharing information among industry leaders and build partnerships with professionals and others that can help support the program's research needs and objectives. The topic of this expert meeting was cost-effective controls and distribution retrofit options for hot water and steam space heating systems in multifamily buildings with the goals of reducing energy waste and improving occupant comfort. The objectives of the meeting were to: (1) Share knowledge and experience on new and existing solutions: what works, what doesn't and why, and what's new; (2) Understand the market barriers to currently offered solutions: what disconnects exist in the market and what is needed to overcome or bridge these gaps; and (3) Identify research needs.

Dentz, J.

2011-10-01T23:59:59.000Z

182

Building America Expert Meeting Report: Hydronic Heating in Multifamily Buildings  

SciTech Connect

The topic of this expert meeting was cost-effective controls and distribution retrofit options for hot water and steam space heating systems in multi-family buildings with the goals of reducing energy waste and improving occupant comfort. The U.S. Department of Energy's Building America program develops technologies with the goal of reducing energy use by 30% to 50% in residential buildings. Toward this goal, the program sponsors 'Expert Meetings' focused on specific building technology topics. The meetings are intended to sharpen Building America research priorities, create a forum for sharing information among industry leaders and build partnerships with professionals and others that can help support the program's research needs and objectives. The topic of this expert meeting was cost-effective controls and distribution retrofit options for hot water and steam space heating systems in multifamily buildings with the goals of reducing energy waste and improving occupant comfort. The objectives of the meeting were to: (1) Share knowledge and experience on new and existing solutions: what works, what doesn't and why, and what's new; (2) Understand the market barriers to currently offered solutions: what disconnects exist in the market and what is needed to overcome or bridge these gaps; and (3) Identify research needs.

Dentz, J.

2011-10-01T23:59:59.000Z

183

Buildings Energy Data Book: 3.6 Office Building Markets and Companies  

Buildings Energy Data Book (EERE)

9 9 Energy Benchmarks for Newly Constructed Large Office Buildings, by Selected City and End-Use (thousand Btu per square foot) Miami 1A Houston 2A Phoenix 2B Atlanta 3A Los Angeles 3B Las Vegas 3B San Francisco 3C Baltimore 4A Albuquerque 4B Seattle 4C Chicago 5A Boulder 5B Minneapolis 6A Helena 6B Duluth 7 Fairbanks 8 Note(s): Source(s): 31.7 1.7 0.6 1.3 Commercial building energy benchmarks are based off of the current stock of commercial buildings and reflect 2004 ASHRAE 90.1 Climate Zones. They are designed to provide a consistent baseline to compare building performance in energy-use simulations. The benchmark building had 498,407 square feet and 12 floors. Benchmark interior lighting energy = 10.7 thousand Btu/SF. Interior equipment energy consumption = 15.94 thousand Btu/SF. DOE/EERE/BT, Commercial Building Benchmark Models, Version 1.3_5.0, Nov. 2010, accessed January 2012 at

184

Buildings Energy Data Book: 3.6 Office Building Markets and Companies  

Buildings Energy Data Book (EERE)

1 1 Energy Benchmarks for Newly Constructed Medium Office Buildings, by Selected City and End-Use (thousand Btu per square foot) Miami 1A Houston 2A Phoenix 2B Atlanta 3A Los Angeles 3B Las Vegas 3B San Francisco 3C Baltimore 4A Albuquerque 4B Seattle 4C Chicago 5A Boulder 5B Minneapolis 6A Helena 6B Duluth 7 Fairbanks 8 Note(s): Source(s): 38.6 0.9 0.8 1.1 Commercial building energy benchmarks are based off of the current stock of commercial buildings and reflect 2004 ASHRAE 90.1 Climate Zones. They are designed to provide a consistent baseline to compare building performance in energy-use simulations. The benchmark building had 53,608 square feet and 3 floors. Benchmark interior lighting energy = 10.7 thousand Btu/SF. Interior equipment energy consumption = 18.85 thousand Btu/SF. DOE/EERE/BT, Commercial Building Benchmark Models, Version 1.3_5.0, Nov. 2010, accessed January 2012 at

185

National Grid Deep Energy Retrofit Pilot  

Science Conference Proceedings (OSTI)

Through discussion of five case studies (test homes), this project evaluates strategies to elevate the performance of existing homes to a level commensurate with best-in-class implementation of high-performance new construction homes. The test homes featured in this research activity participated in Deep Energy Retrofit (DER) Pilot Program sponsored by the electric and gas utility National Grid in Massachusetts and Rhode Island. Building enclosure retrofit strategies are evaluated for impact on durability and indoor air quality in addition to energy performance. Evaluation of strategies is structured around the critical control functions of water, airflow, vapor flow, and thermal control. The aim of the research project is to develop guidance that could serve as a foundation for wider adoption of high performance, 'deep' retrofit work. The project will identify risk factors endemic to advanced retrofit in the context of the general building type, configuration and vintage encountered in the National Grid DER Pilot. Results for the test homes are based on observation and performance testing of recently completed projects. Additional observation would be needed to fully gauge long-term energy performance, durability, and occupant comfort.

Neuhauser, K.

2012-03-01T23:59:59.000Z

186

Buildings Energy Data Book  

Buildings Energy Data Book (EERE)

3.1 Commercial Sector Energy Consumption 3.1 Commercial Sector Energy Consumption 3.2 Commercial Sector Characteristics 3.3 Commercial Sector Expenditures 3.4 Commercial Environmental Emissions 3.5 Commercial Builders and Construction 3.6 Office Building Markets and Companies 3.7 Retail Markets and Companies 3.8 Hospitals and Medical Facilities 3.9 Educational Facilities 3.10 Hotels/Motels 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables Chapter 3 focuses on energy use in the commercial sector. Section 3.1 covers primary and site energy consumption in commercial buildings, as well as the delivered energy intensities of various building types and end uses. Section 3.2 provides data on various characteristics of the commercial sector, including floorspace, building types, ownership, and lifetimes. Section 3.3 provides data on commercial building expenditures, including energy prices. Section 3.4 covers environmental emissions from the commercial sector. Section 3.5 briefly addresses commercial building construction and retrofits. Sections 3.6, 3.7, 3.8, 3.9, and 3.10 provide details on select commercial buildings types, specifically office and retail space, medical facilities, educational facilities, and hotels and motels.

187

Building Energy Software Tools Directory: LISA  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Simulation Load Calculation Renewable Energy Retrofit Analysis SustainabilityGreen Buildings Codes & Standards Materials, Components, Equipment, & Systems Other...

188

Building Energy Software Tools Directory: TAPS  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Simulation Load Calculation Renewable Energy Retrofit Analysis SustainabilityGreen Buildings Codes & Standards Materials, Components, Equipment, & Systems Other...

189

Building Energy Software Tools Directory: Evergreen LED  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Simulation Load Calculation Renewable Energy Retrofit Analysis SustainabilityGreen Buildings Codes & Standards Materials, Components, Equipment, & Systems...

190

Indoor environmental quality benefits of apartment energy retrofits  

NLE Websites -- All DOE Office Websites (Extended Search)

Indoor environmental quality benefits of apartment energy retrofits Indoor environmental quality benefits of apartment energy retrofits Title Indoor environmental quality benefits of apartment energy retrofits Publication Type Journal Article LBNL Report Number LBNL-6373E Year of Publication 2013 Authors Noris, Federico, Gary Adamkiewicz, William W. Delp, Toshifumi Hotchi, Marion L. Russell, Brett C. Singer, Michael Spears, Kimberly Vermeer, and William J. Fisk Journal Building Environment Volume 68 Pagination 170-178 Date Published 10/2013 Keywords Apartments; Energy; Indoor environmental quality; Retrofit; Selection Abstract Sixteen apartments serving low-income populations in three buildings were retrofit with the goal of simultaneously reducing energy consumption and improving indoor environmental quality (IEQ). Retrofit measures varied among apartments and included, among others, envelope sealing, installation of continuous mechanical ventilation systems, upgrading bathroom fans and range hoods, attic insulation, replacement of heating and cooling systems, and adding wall-mounted particle air cleaners. IEQ parameters were measured, generally for two one-week periods before and after the retrofits. The measurements indicate an overall improvement in IEQ conditions after the retrofits. Comfort conditions, bathroom humidity, and concentrations of carbon dioxide, acetaldehyde, volatile organic compounds, and particles generally improved. Formaldehyde and nitrogen dioxide levels decreased in the building with the highest concentrations, were unchanged in a second building, and increased in a third building. IEQ parameters other than particles improved more in apartments with continuous mechanical ventilation systems installed. In general, but not consistently, larger percent increases in air exchange rates were associated with larger percent decreases in indoor levels of the pollutants that primarily come from indoor sources.

191

Golden Valley Electric Association - Commercial Lighting Retrofit...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial Lighting Retrofit Rebate Program Golden Valley Electric Association - Commercial Lighting Retrofit Rebate Program Eligibility Commercial Savings For Appliances &...

192

Expert Meeting Report: Interior Insulation Retrofit of Mass Masonry Wall Assemblies  

Science Conference Proceedings (OSTI)

The Building Science Consortium held an Expert Meeting on Interior Insulation Retrofit of Mass Masonry Wall Assemblies on July 30, 2011 at the Westford Regency Hotel in Westford, MA. This report outlines the extensive information that was presented on assessment of risk factors for premature building deterioration due to interior insulation retrofits, and methods to reduce such risks.

Ueno, K.; Van Straaten, R.

2012-02-01T23:59:59.000Z

193

Closing Gaps in Modeling Multifamily Retrofits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building America Technical Update Meeting Denver, Colorado April 30, 2013 Jordan Dentz, The Levy Partnership., Inc. Closing Gaps in Modeling Multifamily Retrofits Advanced Residential Integrated Energy Solutions Overview * Multifamily modeling inputs (BA House Simulation Protocols) * Important multifamily measures * Other MF gaps Vital to meet 50% goals and therefore important to include in Building America's multifamily modeling capabilities Model Inputs * Heating set point * Cooling set point * Behavior assumptions 3 Heating Set Point - Central Systems * House simulation protocol assumes 71°F * Overheating is common * Approach: adjust modeled heating set point - how much? * Average heating season indoor temperature was 76°F in a sample of 18 buildings (ARIES 2013a)

194

Continuous Commissioning: A Valuable Partner to Retrofit Projects  

E-Print Network (OSTI)

Continuous Commissioning (CC) or HVAC system optimization is not only a valuable stand-alone energy saving measure for commercial buildings, but it is also an important escort solution to retrofit projects. Energy retrofit projects typically achieve projected savings. But in cases where savings goals are not being met, optimizing HVAC system performance can be the difference in an underachieving versus a successful project. This paper presents a real-world study of pairing a CC project with an energy retrofit in a 107,000 square foot hospital building. Applying the CC strategy to an underperforming retrofit, projected energy savings were achieved and even increased. Additionally, by increasing supply air capacity, patients, staff and visitors now enjoy improved comfort conditions. This paper also explores the working relationship between an ESCO and a university research laboratory, whose combined efforts led to this remarkable turn around.

Turner, W. D.; Banks, K.; Athar, A.; Yazdani, B.; Zhu, Y.; Culp, C.

2001-01-01T23:59:59.000Z

195

Measured energy savings and economics of retrofitting existing single- family homes: An update of the BECA-B database  

SciTech Connect

These appendices are the companion volume to report number LBL--28147 Vol.1, with the same title. The summary data tables include physical characteristics, energy consumption, savings, and the retrofit measures installed and their costs for each retrofit project. Each existing single family residential building'' retrofit project in the BECA-B database is described. 99 refs. (BM)

Cohen, S.D.; Goldman, C.A.; Harris, J.P.

1991-02-01T23:59:59.000Z

196

Passive retrofits for Navy housing  

DOE Green Energy (OSTI)

A project to assess and initiate passive solar energy retrofits to US Navy family housing is described. The current data base for Navy housing (ECOP), and its enhancement for passive solar purposes options proposed for Navy housing are explained. The analysis goals and methods to evaluate the retrofits are discussed. An educational package to explain the retrofits is described.

Hibbert, R.; Miles, C.; Jones, R.; Peck, C.; Anderson, J.; Jacobson, V.; Dale, A.M.

1985-01-01T23:59:59.000Z

197

Automated energy management systems for small buildings. Volume II: market assessment reports, Phase I and II. Final report  

SciTech Connect

Marketec, Inc., as part of a Honeywell research project sponsored by the Department of Energy (DOE), studied the major marketing influences affecting purchasing decisions for a new product concept - an Automated Energy Management System (AEMS). The first part of this study, designated Phase One, deals with four broad assessments of market need for an AEMS within the market segment generally defined as small buildings (75,000 square feet or less). Thus, determinations were made, using carefully selected focus groups, of the following issues: (1) market perception of the market segment in particular; (2) attitudinal statements concerning the solution of these problems; (3) current and projected energy-saving practices by the respondents from the market segment; and (4) an estimate of market potential of an AEMS from an analysis of the focus groups. The second phase of this investigation deals with larger national samplings from the same market segments and uses a questionnaire technique. Three small building sectors were chosen to represent the total small-building market: (1) apartments, (2) schools, and (3) offices. In the aggregate, these three sectors represent 50% or more of the energy consumed, square footage, and number of buildings of that total market.

1978-08-01T23:59:59.000Z

198

Demonstration Assessment of Light-Emitting Diode (LED) Retrofit Lamps at the Lobby of the Bonneville Power Administration, Portland, OR  

SciTech Connect

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in the lobby of the Bonneville Power Administration (BPA) headquarters building in Portland, Oregon. The project involved a simple retrofit of 32 track lights used to illuminate historical black-and-white photos and printed color posters from the 1930s and 1940s. BPA is a federal power marketing agency in the Northwestern United States, and selected this prominent location to demonstrate energy efficient light-emitting diode (LED) retrofit options that not only can reduce the electric bill for their customers but also provide attractive alternatives to conventional products, in this case accent lighting for BPA's historical artwork.

Miller, Naomi

2011-07-01T23:59:59.000Z

199

Greenbuilt Retrofit Test House Final Report  

SciTech Connect

The Greenbuilt house, is an all-electric, 1980's era home in the eastern Sacramento suburb of Fair Oaks that was retrofit by Greenbuilt Construction as part of Sacramento Municipal Utility District's (SMUD) Energy Efficient Remodel Demonstration (EERD) Program. The project was a joint effort between the design-build team at Greenbuilt Construction, led by Jim Bayless, SMUD and their project manager Mike Keesee, and the National Renewable Energy Laboratory (NREL). The goal of the Energy Efficient Remodel Demonstration program is to work with local builders to renovate homes with cost-effective energy efficient retrofit measures. The homes remodeled under the EERD program are intended to showcase energy efficient retrofit options for homeowners and other builders. The Greenbuilt house is one of five EERD projects that NREL has supported. NREL's main role in these projects is to provide energy analysis and to monitor the home's performance after the retrofit to verify that the energy consumption is in line with the modeling predictions. NREL also performed detailed monitoring on the more innovative equipment included in these remodels, such as an add-on heat pump water heater.

Sparn, B.; Hudon, K.; Earle, L.; Booten, C.; Tabares-Velasco, P. C.; Barker, G.; Hancock, C. E.

2012-10-01T23:59:59.000Z

200

Building Energy Data Exchange Specification (BEDES) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial Buildings » Building Energy Data Exchange Specification Commercial Buildings » Building Energy Data Exchange Specification (BEDES) Building Energy Data Exchange Specification (BEDES) The Building Energy Data Exchange Specification (BEDES, pronounced "beads" or /bi:ds/) is designed to support analysis of the measured energy performance of commercial, multifamily, and residential buildings, by providing a common data format, definitions, and an exchange protocol for building characteristics, efficiency measures, and energy use. Challenge One of the primary challenges to expanding the building energy efficiency retrofit market is the lack of empirical data on the energy performance and physical and operational characteristics of commercial, multifamily, and residential buildings. This makes it difficult for building-level

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Expert Meeting Report: Retrofit Implementation - A Neighborhood at a Time  

Science Conference Proceedings (OSTI)

This report provides information about a Building America expert meeting hosted by research team Consortium for Advanced Residential Buildings on October 25, 2011, in New York City. The meeting discussed several community residential retrofit projects underway across the United States, and included representatives from utilities, energy program implementation firms, affordable housing agencies, and the financing industry.

Griffiths, D.

2012-04-01T23:59:59.000Z

202

ARRA Proposed Award: The Affordable Multifamily Retrofit Initiative (the Initiative)  

E-Print Network (OSTI)

but not limited to: attic, wall and floor insulation; building envelope sealing; duct sealing and repair; Energy,993,029 Leverage Funding: $6,120,000 Retrofit Target: 26 Multifamily Buildings / 1600 Multifamily Units; radiant barriers; EnergyStar window replacement; domestic hot water replacement, insulation

203

Buildings Energy Data Book: 3.6 Office Building Markets and Companies  

Buildings Energy Data Book (EERE)

2 2 Energy Expenditures per Square Foot of Office Floorspace by Building Age ($2009) (1) Number of Number of Number of Age (years) 2009 Responses 2006 Responses 2004 Responses 0-9 2.1 451 2.1 483 1.8 564 10-19 1.9 582 2.3 503 2.0 848 20-29 2.1 1,161 2.4 939 2.0 786 30-39 2.4 416 2.7 314 2.3 290 40-49 2.5 150 3.0 68 2.9 57 50+ 2.5 187 2.5 128 2.1 164 All Buildings 2.2 3,494 2.4 2,619 1.8 2,939 Note(s): Source(s): 1) Energy includes electric, gas, fuel oil, purchased steam, purchased chilled water, and water/sewage expenditures. BOMA International, The Experience Exchange Report 2010, 2010; BOMA International, The Experience Exchange Report 2007, Aug. 2007; BOMA International, The Experience Exchange Report 2005, Aug. 2005; and EIA, Annual Energy Review 2007, Aug. 2010, Appendix D, p. 383 for price deflators.

204

Buildings Energy Data Book: 3.6 Office Building Markets and Companies  

Buildings Energy Data Book (EERE)

7 7 Advanced Energy Design Guide for Small Office Buildings (1) Shell Percent Glass (WWR) 20-40% Window U-Factor 0.33-0.56 SHGC 0.31-0.49 Wall R-Value 7.6-15.2 Roof R-Value Attic 30-60 Insulation Above Deck 15-30 Wall Material Mass (HC > 7 Btu/ft^2) Lighting Average Power Density (Watts/SF) 0.9 System and Plant System and Plant Packaged Single-Zone Packaged Single-Zone w/ Economizer Cooling Capacity > 54 kBtu Heating Plant: Gas Furnace 80% Combustion Efficiency Cooling Plant: Air conditioner (135-240 thousand Btu*hr.) 10.8 EER/11.2 IPLV - 11.0 EER/11.5 IPLV Service Hot Water: Gas Water Heater 90% Thermal Efficiency Note(s): Source(s): 1) Guide provides approximate parameters for constructing a building which is 30% more efficient than ASHRAE 90.1-1999. Ranges are because of climate zone dependencies.

205

Buildings Energy Data Book: 3.6 Office Building Markets and Companies  

Buildings Energy Data Book (EERE)

3 3 Energy Consumption and Expenditures per Square Foot of Office Floorspace, by Function and Class (1) | | Medical Offices | Financial Offices | Corporate Facilities(2) | Class A | Class B | Class C | | All Buildings | Note(s): Source(s): 2006 2004 Energy Intensity Energy Energy Intensity Energy (thousand Btu/SF) Expenditures ($2010/SF) (thousand Btu/SF) Expenditures ($2010/SF) 90.79 2.56 N.A. 2.36 N.A. 3.12 N.A. 3.32 96.78 2.74 89.38 2.72 81.88 2.44 78.84 2.08 74.87 2.30 N.A. 2.04 1) Categories are not mutually exclusive. 2) Corporate Facilities are any building that the owner occupies at least 75% of the rentable space. BOMA International, The Experience Exchange Report 2007, Aug. 2007; BOMA International, The Experience Exchange Report 2005, Aug. 2005; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for price deflators.

206

Moisture Durability of Vapor Permeable Insulating Sheathing (Fact Sheet), Building America Case Study: Technology Solutions for New and Existing Homes, Building Technologies Office (BTO)  

Energy.gov (U.S. Department of Energy (DOE))

In this project, Building America team Building Science Corporation researched some of the ramifications of using exterior, vapor permeable insulation on retrofit walls with vapor permeable cavity insulation. Retrofit strategies are a key factor in reducing exterior building stock consumption.

207

High-Efficiency Retrofit Lessons for Retail from a SuperTarget: Preprint  

SciTech Connect

The National Renewable Energy Laboratory partnered with Target under the Commercial Building Program to design and implement a retrofit of a SuperTarget in Thornton, CO. The result was a retrofit design that predicted 37% energy savings over ASHRAE Standard 90.1-2004, and 29% compared to existing (pre-retrofit) store consumption. The largest savings came from energy efficient lighting, energy efficient cooling systems, improved refrigeration, and better control of plug loads.

Langner, R.; Deru, M.; Hirsch, A.; Williams, S.

2013-02-01T23:59:59.000Z

208

Chamberlain Heights Redevelopment: A Large Scale, Cold Climate Study of Affordable Housing Retrofits  

SciTech Connect

The City of Meriden Housing Authority (MHA) collaborated with affordable housing developer Jonathon Rose Companies (JRC) to complete a gut renovation of 124 residential units in the Chamberlain Heights retrofit project. The affordable housing community is made up of 36 buildings in duplex and quad configurations located on 22 acres within two miles of downtown Meriden, CT. The final post-retrofit analysis showed 40-45% source energy savings over the existing pre-retrofit conditions.

Donnelly, K.; Mahle, M.

2012-03-01T23:59:59.000Z

209

A Prescription for Value: Building Automation in a Competitive Energy Market  

E-Print Network (OSTI)

As markets for electric power open to competition, business stands at the edge of a breakthrough in the efficient, cost-effective use of energy. To companies disappointed with the pace and benefits of deregulation, that statement may seem radical. To those thinking longer term and following advances in building control and energy management technology, it is not radical at all. For years, utility regulation has masked inefficiencies. Competition will expose them and strip them away, and power prices will fall. But marginally cheaper kilowatt hours are only the beginning. The rules of the emerging market will change forever the way companies buy and use energy. The benefits will dwarf those of traditional efforts to cut consumption and curb demand. That is because competition coincides with the arrival of powerful new tools to monitor, analyze and control energy consumption. Low-cost computing power now puts sophisticated energy management within the reach of small as well as large companies. Internet connections make central monitoring and control of multiple facilities simple and inexpensive, regardless of distance. Gas-fueled chillers and generators reduce reliance on electricity as the sole energy source, providing more flexibility and more price options. Savings opportunities abound. In the competitive market, companies content simply to shop for the cheapest fixed-priced energy contracts will realize some savings. Bigger winners will be companies that learn to manage both energy supply and demand, controlling their consumption patterns to capture marketplace price incentives. The biggest winners will be companies that go even farther, using energy information to help guide strategic business decisions: When to invest in new equipment, where to price a product or service, how to schedule building occupancy, whether to build or expand a facility. Using energy to the fullest means being not just intelligent but agile. Many companies already own a potent tool for gathering, dissecting and acting quickly on energy information. A building automation system (BAS), fed with real-time data and loaded with sophisticated software, serves as the ultimate utility meter. Far from passively recording energy consumption, a BAS becomes a nerve center that executes a company's energy strategy. Properly configured, the BAS can automatically control building functions to use energy in the most cost-effective manner possible. More important, it can deliver energy information in clear, compelling formats, directly to the desktops of people best equipped to translate it into value for the organization. The technical capability exists today. Competitive energy markets will only magnify the possibilities. " If you sign up for a long-term, fixed-price contract today, you are leaving a lot on the table."

Kuhel, G. J.

2001-05-01T23:59:59.000Z

210

Residential Deep Energy Retrofits: Monitoring and Performance of 10  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Deep Energy Retrofits: Monitoring and Performance of 10 Residential Deep Energy Retrofits: Monitoring and Performance of 10 California Case Study Homes Speaker(s): Brennan Less Jeremy Fisher Date: August 16, 2011 - 12:00pm Location: 90-3075 Deep Energy Retrofits are residential remodeling projects, which attempt to drastically reduce energy usage and environmental impact, as well as increase occupant comfort and improve indoor air quality. With energy reduction targets ranging from 50% to 90%, these projects use similar strategies to those typically deployed in a net-zero energy home. Most Deep Retrofits include insulation upgrades, window replacement, air sealing, HVAC replacement, renewable energy technologies, and new appliances and lighting. No building system or component is overlooked. 10 of these exciting projects are being monitored in California by the Energy

211

Buildings Energy Data Book: 3.6 Office Building Markets and Companies  

Buildings Energy Data Book (EERE)

0 0 Energy Benchmarks for Existing Medium Office Buildings, by Selected City and End-Use (thousand Btu per square foot) IECC Post Pre Post Pre Post Pre Post Pre Miami 1A 1.0 0.0 22.0 19.2 0.4 0.4 1.9 13.0 Houston 2A 4.6 1.8 15.5 14.7 0.5 0.5 1.5 12.8 Phoenix 2B 4.0 0.7 17.5 19.4 0.4 0.4 1.9 15.0 Atlanta 3A 7.8 4.3 10.1 10.4 0.6 0.5 1.4 13.9 Los Angeles 3B 4.1 0.3 8.0 3.5 0.5 0.5 1.4 10.9 Las Vegas 3B 5.6 1.4 13.2 14.6 0.5 0.5 1.8 14.5 San Francisco 3C 5.8 1.7 2.9 1.2 0.6 0.6 1.1 8.9 Baltimore 4A 12.1 9.6 8.0 7.8 0.6 0.6 1.3 12.8 Albuquerque 4B 8.0 4.6 6.7 6.9 0.6 0.6 1.6 14.4 Seattle 4C 11.8 7.3 2.5 1.3 0.6 0.6 1.2 11.1 Chicago 5A 17.8 14.2 5.5 4.5 0.7 0.6 1.4 11.4 Boulder 5B 11.6 8.3 4.4 3.9 0.7 0.6 1.5 12.6 Minneapolis 6A 23.6 22.4 4.8 3.8 0.7 0.7 1.4 11.0 Helena 6B 18.1 15.0 2.9 2.3 0.7 0.7 1.4 12.9 Duluth 7 28.9 29.4 2.4 1.7 0.8 0.7 1.4 10.3 Fairbanks 8 52.8 56.4 1.6 1.2 0.8 0.8 1.7 13.2 Note(s): Source(s): DOE/EERE/BT, Commercial Building Benchmark Models, Version 1.3_5.0, Nov. 2010, accessed January 2012 at

212

Buildings Energy Data Book: 3.6 Office Building Markets and Companies  

Buildings Energy Data Book (EERE)

8 8 Energy Benchmarks for Existing Large Office Buildings, by Selected City and End-Use (thousand Btu per square foot) IECC Post Pre Post Pre Post Pre Post Pre Miami 1A 0.3 0.8 21.9 24.5 0.3 0.2 3.1 3.5 Houston 2A 4.2 4.4 17.7 20.9 0.3 0.3 2.8 3.3 Phoenix 2B 3.0 3.3 16.2 18.3 0.3 0.3 3.2 3.7 Atlanta 3A 6.9 8.5 14.1 17.5 0.4 0.4 2.6 3.2 Los Angeles 3B 2.8 2.9 11.9 13.0 0.4 0.4 2.5 2.7 Las Vegas 3B 4.6 4.7 10.8 13.0 0.3 0.3 2.7 3.3 San Francisco 3C 5.0 6.4 5.6 6.6 0.4 0.4 1.8 2.1 Baltimore 4A 9.8 14.4 12.0 15.5 0.4 0.4 2.4 3.1 Albuquerque 4B 6.6 8.3 6.5 7.6 0.4 0.4 2.3 2.7 Seattle 4C 10.1 15.0 4.5 5.3 0.5 0.4 1.7 2.1 Chicago 5A 14.8 15.1 7.4 7.7 0.5 0.5 2.0 2.1 Boulder 5B 9.5 9.5 4.9 5.0 0.5 0.5 2.0 2.0 Minneapolis 6A 19.6 21.3 6.7 7.0 0.5 0.5 2.0 2.1 Helena 6B 14.2 15.7 3.7 3.8 0.5 0.5 1.8 1.9 Duluth 7 24.3 26.6 3.8 3.6 0.6 0.6 1.8 1.8 Fairbanks 8 45.9 47.9 2.7 2.2 0.7 0.6 2.0 1.7 Note(s): Source(s): DOE/EERE/BT, Commercial Building Benchmark Models, Version 1.3_5.0, Nov. 2010, accessed January 2012 at

213

Short-Term Test Results: Transitional Housing Energy Efficiency Retrofit in the Hot-Humid Climate  

SciTech Connect

This project evaluates the renovation of a 5,800 ft2, multi-use facility located in St. Petersburg, on the west coast of central Florida, in the hot humid climate. An optimal package of retrofit measures was designed to deliver 30-40% annual energy cost savings for this building with annual utility bills exceeding $16,000 and high base load consumption. Researchers projected energy cost savings for potential retrofit measures based on pre-retrofit findings and disaggregated, weather normalized utility bills as a basis for simulation true-up. A cost-benefit analysis was conducted for the seven retrofit measures implemented; adding attic insulation and sealing soffits, tinting windows, improving whole building air-tightness, upgrading heating and cooling systems and retrofitting the air distribution system, replacing water heating systems, retrofitting lighting, and replacing laundry equipment. The projected energy cost savings for the full retrofit package based on a post-retrofit audit is 35%. The building's architectural characteristics, vintage, and residential and commercial uses presented challenges for both economic projections and retrofit measure construction.

Sutherland, K.; Martin, E.

2013-02-01T23:59:59.000Z

214

Short-Term Test Results: Transitional Housing Energy Efficiency Retrofit in the Hot-Humid Climate  

SciTech Connect

This project evaluates the renovation of a 5,800 ft2, multi-use facility located in St. Petersburg, on the west coast of central Florida, in the hot humid climate. An optimal package of retrofit measures was designed to deliver 30-40% annual energy cost savings for this building with annual utility bills exceeding $16,000 and high base load consumption. Researchers projected energy cost savings for potential retrofit measures based on pre-retrofit findings and disaggregated, weather normalized utility bills as a basis for simulation true-up. A cost-benefit analysis was conducted for the seven retrofit measures implemented; adding attic insulation and sealing soffits, tinting windows, improving whole building air-tightness, upgrading heating and cooling systems and retrofitting the air distribution system, replacing water heating systems, retrofitting lighting, and replacing laundry equipment. The projected energy cost savings for the full retrofit package based on a post-retrofit audit is 35%. The building's architectural characteristics, vintage, and residential and commercial uses presented challenges for both economic projections and retrofit measure construction.

Sutherland, K.; Martin, E.

2013-02-01T23:59:59.000Z

215

Data Center Airflow Management Retrofit  

NLE Websites -- All DOE Office Websites (Extended Search)

though this sometimes can be the best eco- nomic solution. Investing retrofit funds in passive components such as sealing leaks under the floor, repairing duct- work, replacing...

216

Evaluation of a Multifamily Retrofit in Climate Zone 5, Boulder, Colorado (Fact Sheet)  

SciTech Connect

In 2009, a 37-unit apartment complex located in Boulder, Colorado, underwent an energy retrofit to comply with Boulder SmartRegs Ordinance, a mandate that requires all rental properties to meet certain energy efficiency standards by 2018. The Consortium of Advanced Residential Buildings (CARB), a U.S. Department of Energy Building America team, worked with city planners and building owners to evaluate this program and recently completed a case study evaluating the effectiveness of a collection of retrofit measures.

Metzger, C.; Arena, L.; Williamson, J.

2013-11-01T23:59:59.000Z

217

Building Energy Software Tools Directory: Tools by Subjects  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Simulation Load Calculation Renewable Energy Retrofit Analysis SustainabilityGreen Buildings Codes & Standards Materials, Components, Equipment, & Systems Other...

218

Predicted vs. Actual Energy Savings of Retrofitted House  

E-Print Network (OSTI)

This paper reports the results of actual energy savings and the predicted energy savings of retrofitted one-story house located in Dhahran, Saudi Arabia. The process started with modeling the house prior to retrofitting and after retrofitting. The monthly metered energy consumption is acquired from the electric company archives for seven years prior to retrofitting and recording the actual monthly energy consumption of the post retrofitting. The house model is established on DOE 2.1. Actual monthly energy consumption is used to calibrate and fine-tuning the model until the gap between actual and predicted consumption was narrowed. Then the Energy Conservation Measures (ECMs) are entered into the modeled house according to the changes in thermo-physical properties of the envelope and the changes in schedules and number of users. In order to account for those differences, electrical consumption attributed to A/C in summer was isolated and compared. The study followed the International Performance Measurement & Verification Protocol (IPMVP) in assessing the impact of energy conservation measures on actual, metered, building energy consumption. The study aimed to show the predicted savings by the simulated building model and the actual utility bills' analysis in air conditioning consumption and peak at monthly load due to building envelope.

Al-Mofeez, I.

2010-01-01T23:59:59.000Z

219

Building Technologies Office: Commercial Reference Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Commercial Reference Commercial Reference Buildings to someone by E-mail Share Building Technologies Office: Commercial Reference Buildings on Facebook Tweet about Building Technologies Office: Commercial Reference Buildings on Twitter Bookmark Building Technologies Office: Commercial Reference Buildings on Google Bookmark Building Technologies Office: Commercial Reference Buildings on Delicious Rank Building Technologies Office: Commercial Reference Buildings on Digg Find More places to share Building Technologies Office: Commercial Reference Buildings on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score

220

An analysis of heating and cooling conservation features in commercial buildings  

SciTech Connect

One purpose of this study is to estimate the relationship in commercial buildings between conservation investments, fuel prices, building occupancy and building characteristics for new buildings and for existing buildings. The database is a nationwide survey of energy in commercial buildings conducted by the Energy Information Administration (EIA) in 1906. Some simple cross-tabulations indicate that conservation measures vary with building size, building age, and fuel used for building heating. Regression estimates of a conservation model indicate that the number of conservation model indicate that the number of conservation features installed during construction is a positive function of the price of the heating fuel at the time of construction. Subsequent additions of conservation features are positively correlated with increases in heating fuel prices. Given the EIA projection of relatively stable future energy prices, the number of retrofits may not increase significantly. Also, energy efficiency in new buildings may not continue to increase relative to current new buildings. If fuel prices affect consumption via initial conservation investments, current fuel prices, marginal or average, are not the appropriate specification. The fuel price regression results indicate that conservation investments in new buildings are responsive to market signals. Retrofits are less responsive to market signals. The number of conservation features in a building is not statistically related to the type of occupancy (owner versus renter), which implies that conservation strategies are not impeded by the renting or leasing of buildings.

Sutherland, R.J.

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

An analysis of heating and cooling conservation features in commercial buildings  

SciTech Connect

One purpose of this study is to estimate the relationship in commercial buildings between conservation investments, fuel prices, building occupancy and building characteristics for new buildings and for existing buildings. The database is a nationwide survey of energy in commercial buildings conducted by the Energy Information Administration (EIA) in 1906. Some simple cross-tabulations indicate that conservation measures vary with building size, building age, and fuel used for building heating. Regression estimates of a conservation model indicate that the number of conservation model indicate that the number of conservation features installed during construction is a positive function of the price of the heating fuel at the time of construction. Subsequent additions of conservation features are positively correlated with increases in heating fuel prices. Given the EIA projection of relatively stable future energy prices, the number of retrofits may not increase significantly. Also, energy efficiency in new buildings may not continue to increase relative to current new buildings. If fuel prices affect consumption via initial conservation investments, current fuel prices, marginal or average, are not the appropriate specification. The fuel price regression results indicate that conservation investments in new buildings are responsive to market signals. Retrofits are less responsive to market signals. The number of conservation features in a building is not statistically related to the type of occupancy (owner versus renter), which implies that conservation strategies are not impeded by the renting or leasing of buildings.

Sutherland, R.J.

1990-12-31T23:59:59.000Z

222

Retrofit Air Preheat Economics  

E-Print Network (OSTI)

Retrofit air preheat systems are the most reliable and efficient means to effect significant energy conservation for large existing industrial furnaces. Units can be quickly installed without a lengthy shutdown, and the furnace efficiency can be increased to a range of 89% to 92%. The economic justification for the addition of this equipment is presented in new total investment curves and simple payout curves for a range of fuel cost. This will enable the owner to quickly determine the preliminary feasibility and conceptual requirements for his project before proceeding with more vigorous work.

Goolsbee, J. A.

1981-01-01T23:59:59.000Z

223

Pre-Retrofit Lighting Study at the University of Texas at Arlington, Texas  

E-Print Network (OSTI)

As a part of the Energy Cost Reduction Measure (ECRM) retrofit program, funded by LoanSTAR, the U.T. Arlington site was granted a $2 million loan to implement an energy-saving lighting retrofit in 20 classroom buildings on the campus. The original Audit Report for the site, completed in 1991, recommended a lighting retrofit that included delamping, relamping with high efficiency lamps, the installation of high efficiency electronic ballasts, and the installation of specular reflectors. However, if the retrofit could be implemented without the use of specular reflectors, then a considerable amount of investment capital would be saved.

Houcek, J. K.; Claridge, D. E.; Haberl, J. S.

1993-01-01T23:59:59.000Z

224

New Jersey Landlord, Tenants See Benefits of Retrofits | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Jersey Landlord, Tenants See Benefits of Retrofits New Jersey Landlord, Tenants See Benefits of Retrofits New Jersey Landlord, Tenants See Benefits of Retrofits April 9, 2010 - 2:32pm Addthis Joshua DeLung Some might think that only single-family homes are being weatherized across America, but eligible renters in Newark, N.J., are taking advantage of the increases in savings, safety and comfort that come with weatherization. Sunny Uberio is the owner of Realty Management Systems LLC in Newark, N.J., where he had his three apartment buildings evaluated for their energy efficiency and found that the older heating and cooling systems and other measures were insufficient when it came to saving energy. La Casa de Don Pedro, a local community action agency, was able to help Sunny by weatherizing the buildings.

225

A Path to Successful Energy Retrofits: Early Collaboration Through  

NLE Websites -- All DOE Office Websites (Extended Search)

Through Through Integrated Project Delivery Teams Title A Path to Successful Energy Retrofits: Early Collaboration Through Integrated Project Delivery Teams Publication Type Report Refereed Designation Refereed LBNL Report Number LBNL-6130E Year of Publication 2012 Authors Parrish, Kristen Date Published 10/2012 Publisher Lawrence Berkeley National Laboratory Abstract This document guides you through a process for the early design phases of retrofit projects to help you mitigate frustrations commonly experienced by building owners and designers. It outlines the value of forming an integrated project delivery team and developing a communication and information-sharing infrastructure that fosters collaboration. This guide does not present a complete process for designing an energy retrofit for a building. Instead, it focuses on the early design phase tasks related to developing and selecting energy efficiency measures (EEMs) that benefit from collaboration, and highlights the resulting advantages.

226

New Jersey Landlord, Tenants See Benefits of Retrofits | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Jersey Landlord, Tenants See Benefits of Retrofits Jersey Landlord, Tenants See Benefits of Retrofits New Jersey Landlord, Tenants See Benefits of Retrofits April 9, 2010 - 2:32pm Addthis Joshua DeLung Some might think that only single-family homes are being weatherized across America, but eligible renters in Newark, N.J., are taking advantage of the increases in savings, safety and comfort that come with weatherization. Sunny Uberio is the owner of Realty Management Systems LLC in Newark, N.J., where he had his three apartment buildings evaluated for their energy efficiency and found that the older heating and cooling systems and other measures were insufficient when it came to saving energy. La Casa de Don Pedro, a local community action agency, was able to help Sunny by weatherizing the buildings. "Through their program, I was able to get new boilers installed, new

227

Wyandotte Neighborhood Stabilization Program: Retrofit of Two Homes  

SciTech Connect

The Wyandotte NSP2 project aims to build 20 new houses and retrofit 20 existing houses in Wyandotte, MI. This report will detail the retrofit of 2 existing houses in the program. Wyandotte is part of a Michigan State Housing Development Authority-led consortium that is funded by HUD under the NSP2 program. The City of Wyandotte has also been awarded DOE EE&CBG funds that are being used to develop a district GSHP system to service the project. This draft report examines the energy efficiency recommendations for retrofit construction at these homes. The report will be of interest to anyone planning an affordable, high performance retrofit of an existing home in a Cold Climate zone. Information from this report will also be useful to retrofit or weatherization program staff as some of the proposed retrofit solutions will apply to a wide range of projects. Preliminary results from the first complete house suggest that the technology package employed (which includes spray foam insulation and insulating sheathing) does meet the specific whole house water, air, and thermal control requirements, as well as, the project's affordability goals. Monitoring of the GSHP system has been recommended and analysis of this information is not yet available.

Lukachko, A.; Grin, A.; Bergey, D.

2013-04-01T23:59:59.000Z

228

Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S.  

E-Print Network (OSTI)

contractual, energy and market-related characteristics. Afunction of local energy-market and weather characteristicslocal-level wholesale energy market price dynamics and local

Jaffee, Dwight; Stanton, Richard; Wallace, Nancy

2012-01-01T23:59:59.000Z

229

Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S.  

E-Print Network (OSTI)

contractual, energy and market-related characteristics. Alocal-level wholesale energy market price dynamics and localexpenses, and energy factor market inputs. In a companion

Jaffee, Dwight M.; Stanton, Richard; Wallace, Nancy E.

2010-01-01T23:59:59.000Z

230

Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S.  

E-Print Network (OSTI)

local-level wholesale energy market price dynamics and localare included. Energy factor market prices, the shape of theare included. Energy factor market prices, the shape of the

Jaffee, Dwight M.; Stanton, Richard; Wallace, Nancy E.

2010-01-01T23:59:59.000Z

231

Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S.  

E-Print Network (OSTI)

local-level wholesale energy market price dynamics and localare included. Energy factor market prices, the shape of theare included. Energy factor market prices, the shape of the

Jaffee, Dwight; Stanton, Richard; Wallace, Nancy

2012-01-01T23:59:59.000Z

232

Retrofitting Vegas: Implementing Energy Efficiency in Two Las Vegas Test Homes  

SciTech Connect

In 2009, the state of Nevada received nearly forty million dollars in Neighborhood Stabilization Funds from the Department of Housing and Urban Development. The purpose of this funding was to stabilize communities that have suffered from foreclosures and abandonment. In an effort to provide guidance to local officials and maximize how effectively this NSP funding is utilized in retrofitting homes, CARB provided design specifications, energy modeling, and technical support for the Building America Retrofit Alliance (BARA) team and its local partners - Better Building Performance, Nevada Energy Star Partners Green Alliance, and Home Free Nevada - for two retrofit test homes. One home was to demonstrate a modest retrofit and the other a deep energy retrofit. Through this project, CARB has provided two robust solution packages for retrofitting homes built in this region between the 1980s and early 1990s without substantially inconveniencing the occupants. The two test homes, the Carmen and Sierra Hills, demonstrate how cost-effectively energy efficient upgrades can be implemented in the hot, dry climate of the Southwest. In addition, the homes were used as an educational experience for home performance professionals, building trades, remodelers, and the general public. In-field trainings on air-sealing, HVAC upgrades, and insulating were provided to local contractors during the retrofit and BARA documented these retrofits through a series of video presentations, beginning with a site survey and concluding with the finished remodel and test out.

Puttagunta, S.

2013-04-01T23:59:59.000Z

233

Pilot Residential Deep Energy Retrofits and the PNNL Lab Homes  

SciTech Connect

This report summarizes research investigating the technical and economic feasibility of several pilot deep energy retrofits, or retrofits that save 30% to 50% or more on a whole-house basis while increasing comfort, durability, combustion safety, and indoor air quality. The work is being conducted for the U.S. Department of Energy Building Technologies Program as part of the Building America Program. As part of the overall program, Pacific Northwest National Laboratory (PNNL) researchers are collecting and analyzing a comprehensive dataset that describes pre- and post-retrofit energy consumption, retrofit measure cost, health and comfort impacts, and other pertinent information for each home participating in the study. The research and data collection protocol includes recruitment of candidate residences, a thorough test-in audit, home energy modeling, and generation of retrofit measure recommendations, implementation of the measures, test-out, and continued evaluation. On some homes, more detailed data will be collected to disaggregate energy-consumption information. This multi-year effort began in October 2010. To date, the PNNL team has performed test-in audits on 51 homes in the marine, cold, and hot-humid climate zones, and completed 3 retrofits in Texas, 10 in Florida, and 2 in the Pacific Northwest. Two of the retrofits are anticipated to save 50% or more in energy bills and the others - savings are in the 30% to 40% range. Fourteen other retrofits are under way in the three climate zones. Metering equipment has been installed in seven of these retrofits - three in Texas, three in Florida, and one in the Pacific Northwest. This report is an interim update, providing information on the research protocol and status of the PNNL deep energy retrofit project as of December, 2011. The report also presents key findings and lessons learned, based on the body of work to date. In addition, the report summarizes the status of the PNNL Lab Homes that are new manufactured homes procured with minimal energy-efficiency specifications typical of existing homes in the region, and sited on the PNNL campus. The Lab Homes serve as a flexible test facility (the first of its kind in the Pacific Northwest) to rapidly evaluate energy-efficient and grid-smart technologies that are applicable to residential construction.

Widder, Sarah H.; Chandra, Subrato; Parker, Graham B.; Sande, Susan; Blanchard, Jeremy; Stroer, Dennis; McIlvaine, Janet; Chasar, David; Beal, David; Sutherland, Karen

2012-01-01T23:59:59.000Z

234

Short-Term Test Results: Multifamily Home Energy Efficiency Retrofit  

SciTech Connect

Multifamily deep energy retrofits (DERs) represent great potential for energy savings, while also providing valuable insights on research-generated efficiency measures, cost-effectiveness metrics, and risk factor strategies for the multifamily housing industry. The Bay Ridge project is comprised of a base scope retrofit with a goal of achieving 30% savings (relative to pre-retrofit), and a DER scope with a goal of 50% savings (relative to pre-retrofit). The base scope has been applied to the entire complex, except for one 12-unit building which underwent the DER scope. Findings from the implementation, commissioning, and short-term testing at Bay Ridge include air infiltration reductions of greater than 60% in the DER building; a hybrid heat pump system with a Savings to Investment Ratio (SIR) > 1 (relative to a high efficiency furnace) which also provides the resident with added incentive for energy savings; and duct leakage reductions of > 60% using an aerosolized duct sealing approach. Despite being a moderate rehab instead of a gut rehab, the Bay Ridge DER is currently projected to achieve energy savings ? 50% compared to pre-retrofit, and the short-term testing supports this estimate.

Lyons, J.

2013-01-01T23:59:59.000Z

235

Measuring Energy-Saving Retrofits: Experiences from the LoanSTAR Program  

E-Print Network (OSTI)

In 1988 the Governor's Energy Management Center of Texas received approval from the U.S. Department of Energy to establish a $98.6 million state-wide retrofit demonstration revolving loan program to fund energy-conserving retrofits in state, public school, and local government buildings. As part of this program, a first-of-its-kind, statewide Monitoring and Analysis Program (MAP) was established to verify energy and dollar savings of the retrofits, reduce energy costs by identifying operational and maintenance improvements, improve retrofit selection in future rounds of the LoanSTAR program, and initiate a data base of energy use in institutional and commercial buildings located in Texas. This report discusses the LoanSTAR MAP with an emphasis on the process of acquiring and analyzing data to measure savings from energy conservation retrofits when budgets are a constraint.

Claridge, D. E.; Heffington, W. M.; O'Neal, D. L.; Turner, W. D.; Haberl, J. S.; Reddy, T. A.

2005-09-27T23:59:59.000Z

236

Design and Build- Cost-Effective Energy Conservation: An Opportunity for the Competitive Market  

E-Print Network (OSTI)

This paper expands on concepts presented at the World Energy Congress and DA/DSM earlier this year. In the light of recent developments I have changed the title of the paper, merged some of the issues and updated my comments. The entire energy industry is in a state of flux in anticipation of the deregulation of the electricity supply industry. Utilities are, right now, creating subsidiary companies which will take advantage of the new competitive markets. These companies will trade as Energy Service Providers, offering a wide range of products, including conservation. They will focus on the bills the customers pay, not solely on the rates for energy. As this transition occurs the current methods for implementing energy conservation will be closely examined. We will see some of the aberrant and expensive practices created within a closely regulated Demand Side Management environment disappear. They will be replaced by traditional methodologies used in the construction industry. This paper examined the opportunity for those construction models in the competitive energy supply industry. I contend that an adaptation of the design and build method of construction offers many of the answers needed for cost effective implementation. The Design & Build contract has most of the key features needed in an energy conservation project. It is a proven method, understood by all participants, and it has inherent flexibility, needed to provide the building owner with the optimum solution for the building. Concentrating on the design of comprehensive Energy Conservation Measures (ECM), the D&B firm augments the strengths of its customers, conservation developers. The concepts offered herein are largely speculative; intended to create dialogue on the opportunities suggested. This document is not definitive. Now, can the industry make this work?

McGeown, D. I.

1995-04-01T23:59:59.000Z

237

Progress in Residential Retrofit  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 The Cutting Edge: On the Energy Edge The 13,400 square foot (1,240 square meter) Landmark building in Yakima, Washington, one of 28 participating Energy Edge buildings. In the Pacific Northwest, 28 commercial buildings have been built to demonstrate cost-effective energy savings with no loss of occupant amenity. Sponsored by the Bonneville Power Administration, the Energy Edge buildings were designed to use 30% less energy than a baseline building built to the Model Conservation Standards, the regional energy code. The 28 buildings are typical of new commercial construction in the region: office buildings, schools, fast-food establishments, medical clinics, a supermarket, and a convenience store. Floor areas range from 2,000 to more than 1,000,000 square feet (~200 to 10,000 square meters).

238

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book (EERE)

8 8 2009 Sales Price and Construction Cost Breakdown of an Average New Single-Family Home ($2010) (1) Function Finished Lot 20% Construction Cost 59% Financing 2% Overhead & General Expenses 5% Marketing 1% Sales Commission 3% Profit 9% Total 100% Function Building Permit Fees 2% Impact Fees 1% Water and Sewer Inspection 2% Excavation, Foundation, & Backfill 7% Steel 1% Framing and Trusses 16% Sheathing 2% Windows 3% Exterior Doors 1% Interior Doors & Hardware 2% Stairs 1% Roof Shingles 4% Siding 6% Gutters & Downspouts 0% Plumbing 5% Electrical Wiring 4% Lighting Fixtures 1% HVAC 4% Insulation 2% Drywall 5% Painting 3% Cabinets, Countertops 6% Appliances 2% Tiles & Carpet 5% Trim Material 3% Landscaping & Sodding 3% Wood Deck/Patio 1% Asphalt Driveway 1% Other 9% Total 100% Note(s): Source(s): NAHB, Breaking Down House Price and Construction Costs, 2010, Table 1; and EIA, Annual Energy Review 2010, Oct. 2011, Appendix D, p. 353 for price

239

Evaluating High Efficiency Motor Retrofit  

E-Print Network (OSTI)

In the petrochemical and refining Industries, and most manufacturing plants, the reliable operation of AC motors always has been crucial to the continuous operation of the process. Now, the cost of operating these motors has also become a significant factor. Engineers Involved In motor specification can help lower plant operating costs and reduce electrical energy consumption dramatically by a relatively simple technique: retrofit of existing, standard-efficiency motors with new, high efficiency models. This article demonstrates strong reasons for motor retrofit, and explains step-by step how process and manufacturing engineering personnel can fully evaluate a retrofit decision.

Evans, T. A.

1984-01-01T23:59:59.000Z

240

Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S.  

E-Print Network (OSTI)

for 1222 annual Energy Star building ratings). The reportedto carry out energy efficient building improvements, sinceare planning to create energy efficient buildings. But these

Jaffee, Dwight; Stanton, Richard; Wallace, Nancy

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Advancing Residential Retrofits in Atlanta  

SciTech Connect

This report will summarize the home energy improvements performed in the Atlanta, GA area. In total, nine homes were retrofitted with eight of the homes having predicted source energy savings of approximately 30% or greater based on simulated energy consumption.

Jackson, Roderick K [ORNL; Kim, Eyu-Jin [Southface Energy Institute; Roberts, Sydney [Southface Energy Institute; Stephenson, Robert [Southface Energy Institute

2012-07-01T23:59:59.000Z

242

Closed-cycle Retrofit Study  

Science Conference Proceedings (OSTI)

EPRI is investigating implications of a potential U.S. Environmental Protection Agency (EPA) Clean Water Act 316(b) rulemaking that would establish "Best Technology Available" (BTA) based on closed-cycle cooling retrofits for facilities with once-through cooling. This report focuses on estimated costs associated with closed-cycle cooling system retrofits that include: 1) capital costs, 2) energy required to operate the closed-cycle system, 3) heat rate penalty, and 4) extended downtime required to retrof...

2011-01-31T23:59:59.000Z

243

Market assessment for active solar heating and cooling products. Category B: a survey of decision-makers in the HVAC marketplace. Final report  

DOE Green Energy (OSTI)

A comprehensive evaluation of the market for solar heating and cooling products for new and retrofit markets is reported. The emphasis is on the analysis of solar knowledge among HVAC decision makers and a comprehensive evaluation of their solar attitudes and behavior. The data from each of the following sectors are described and analyzed: residential consumers, organizational and manufacturing buildings, HVAC engineers and architects, builders/developers, and commercial/institutional segments. (MHR)

None

1980-09-01T23:59:59.000Z

244

Building Technologies Office: Innovative Retrofit Programs and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Neighborhood Program Challenge Home Guidelines for Home Energy Professionals Technology Research, Standards, & Codes Popular Residential Links Success Stories Previous Next...

245

Seismic retrofitting of deficient Canadian buildings  

E-Print Network (OSTI)

Many developed countries such as Canada and the United States are facing a significant infrastructure crisis. Most of their facilities have been built with little consideration of seismic design and durability issues. As ...

Gemme, Marie-Claude

2009-01-01T23:59:59.000Z

246

Mixed-Mode Ventilation and Building Retrofits  

E-Print Network (OSTI)

minimizing the use of air-conditioning – A research reportComfort without air -conditioning in refurbished offices –projects. Whether air conditioning is being reduced or

Brager, Gail; Ackerly, Katie

2010-01-01T23:59:59.000Z

247

Phillip Burton Federal Building EMCS Retrofit Analysis  

E-Print Network (OSTI)

on a location and project-specific basis. ELECTRCITY AND NATURAL GAS (E-3): Renewables Portfolio Standard and (E

248

Mixed-Mode Ventilation and Building Retrofits  

E-Print Network (OSTI)

November 1994, ENTPE, Lyon. [CIBSE] Chartered Institution ofMixed-mode ventilation. CIBSE Applications Manual AM13.incorporated by the design. CIBSE, 2000 Mixed-mode

Brager, Gail; Ackerly, Katie

2010-01-01T23:59:59.000Z

249

Mixed-Mode Ventilation and Building Retrofits  

E-Print Network (OSTI)

October 1991). Energy Consumption Guide 19, Bordass, W.programme.   Energy  Consumption  Guide  19,   ‘Energy  W. 1991. Energy Efficiency in Offices: A Technical Guide for

Brager, Gail; Ackerly, Katie

2010-01-01T23:59:59.000Z

250

Home Retrofits Save Money, Add Value | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Home Retrofits Save Money, Add Value Home Retrofits Save Money, Add Value Home Retrofits Save Money, Add Value February 22, 2010 - 11:40am Addthis Joshua DeLung What are the key facts? Tanya $41,000 in home upgrades were possible through the Energy Independence Program. Tanya to pay back the money through installments on her property taxes. After she did the upgrades, Tanya's energy bills are now down 50 percent. As the real estate business rebounds, homebuilders are seeing some growth because of a new nationwide awareness of energy efficiency and the money it can save homeowners. Tanya Narath, of Santa Rosa, Calif., was already taking advantage of renewable energy and green building techniques - her home has had solar panels on its roof for years, and solar tubes draw in natural light to brighten even the darkest spaces of the home. But then Tanya had an energy

251

Financing Energy Efficiency Retrofits in Oakland (A Roundtable Discussion)  

NLE Websites -- All DOE Office Websites (Extended Search)

Financing Energy Efficiency Retrofits in Oakland (A Roundtable Discussion) Financing Energy Efficiency Retrofits in Oakland (A Roundtable Discussion) Speaker(s): Emily Kirsch Justin Butler Date: July 15, 2008 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Galen Barbose James Lutz Cities around the country are developing large-scale programs to retrofit portions of their housing stock, seizing the 'low-hanging fruit' of energy efficiency. As buildings account for roughly 40% of energy consumption in the U.S., such efforts can substantially reduce carbon-based energy use while providing jobs and growing the local green economy. The main barriers to this work are the necessary upfront capital, the risk of losing investment if properties are sold before savings are realized, and the issue of "split incentives" in rented housing units. In order for Oakland

252

Home Retrofits Save Money, Add Value | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Home Retrofits Save Money, Add Value Home Retrofits Save Money, Add Value Home Retrofits Save Money, Add Value February 22, 2010 - 11:40am Addthis Joshua DeLung What are the key facts? Tanya $41,000 in home upgrades were possible through the Energy Independence Program. Tanya to pay back the money through installments on her property taxes. After she did the upgrades, Tanya's energy bills are now down 50 percent. As the real estate business rebounds, homebuilders are seeing some growth because of a new nationwide awareness of energy efficiency and the money it can save homeowners. Tanya Narath, of Santa Rosa, Calif., was already taking advantage of renewable energy and green building techniques - her home has had solar panels on its roof for years, and solar tubes draw in natural light to brighten even the darkest spaces of the home. But then Tanya had an energy

253

New York State passive solar design and retrofit competition  

SciTech Connect

Many homeowners are faced with the problem of reducing their home energy bills. Solar and energy conservation retrofitting is a potential solution for the home energy problem, capable of significantly reducing heating, cooling, and domestic hot water energy bills. The technique used by 12 homeowners and their designers to adapt and integrate various solar and energy conservation features into 12 different projects is discussed. A variety of innovative solutions were utilized in this project and the integration of those ideas into the buildings being retrofitted is discussed. Integration of sunspaces, increased south glazing, solar domestic hot water, storage systems, air distribution systems, insulation systems, etc., is discusssed. All 12 of these designs are award winning projects submitted in response to an ERDA competitive solar retrofit announcement.

Niles, J.E.; Barron, J.J.; Cole, W.J.

1981-01-01T23:59:59.000Z

254

Retrofitting the Southeast: The Cool Energy House  

Science Conference Proceedings (OSTI)

The Consortium for Advanced Residential Buildings has provided the technical engineering and building science support for a highly visible demonstration home in connection with the National Association of Home Builders' International Builders Show. The two previous projects, the Las Vegas net-zero ReVISION House and the 2011 VISION and ReVISION Houses in Orlando, met goals for energy efficiency, cost effectiveness, and information dissemination through multiple web-based venues. This project, which was unveiled at the 2012 International Builders Show in Orlando on February 9, is the deep energy retrofit Cool Energy House (CEH). The CEH began as a mid-1990s two-story traditional specification house of about 4,000 ft2 in the upscale Orlando suburb of Windermere.

Zoeller, W.; Shapiro, C.; Vijayakumar, G.; Puttagunta, S.

2013-02-01T23:59:59.000Z

255

Indoor environment quality and energy retrofits in low-income...  

NLE Websites -- All DOE Office Websites (Extended Search)

Indoor environment quality and energy retrofits in low-income apartments: retrofit selection protocol Title Indoor environment quality and energy retrofits in low-income...

256

Track C - Market-Driven Research Solutions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

C - Market-Driven Research Solutions C - Market-Driven Research Solutions Track C - Market-Driven Research Solutions Presentations from Track C, Market-Driven Research Solutions of the U.S. Department of Energy Building America program's 2012 Residential Energy Efficiency Stakeholder Meeting are provided below as Adobe Acrobat PDFs. These presentations for this track covered the following topics: Outreach Initiatives; Case Studies; Technical Approach to Home Energy Management; Valuing Energy Efficiency; Software Accuracy Issues in Poorly Insulated, Leaky Homes; and New Additions to Codes. customer_focused_deploy.pdf building_america_pubs.pdf public_private_media.pdf higher_perf_cost_neutral.pdf cnt_energy_savers.pdf home_retrofits_southeast.pdf brillion_technology.pdf nonintrusive_load_monitor.pdf

257

Track C - Market-Driven Research Solutions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Track C - Market-Driven Research Solutions Track C - Market-Driven Research Solutions Track C - Market-Driven Research Solutions Presentations from Track C, Market-Driven Research Solutions of the U.S. Department of Energy Building America program's 2012 Residential Energy Efficiency Stakeholder Meeting are provided below as Adobe Acrobat PDFs. These presentations for this track covered the following topics: Outreach Initiatives; Case Studies; Technical Approach to Home Energy Management; Valuing Energy Efficiency; Software Accuracy Issues in Poorly Insulated, Leaky Homes; and New Additions to Codes. customer_focused_deploy.pdf building_america_pubs.pdf public_private_media.pdf higher_perf_cost_neutral.pdf cnt_energy_savers.pdf home_retrofits_southeast.pdf brillion_technology.pdf nonintrusive_load_monitor.pdf

258

Market  

... and its contributions to society and the economy; The marketing group values suggestions from researchers regarding companies to approach.

259

Assessment of Building Energy-Saving Policies and Programs in China During the 11th Five Year Plan  

E-Print Network (OSTI)

China. ” Energy& Buildings 40 (12): 2121-2127. Zhou N. ,Scenarios of Commercial Building Energy Consumption inbuilding energy retrofits, and building energy control

Zhou, Nan

2011-01-01T23:59:59.000Z

260

Assessment of Building Energy-Saving Policies and Programs in China During the 11th Five Year Plan  

E-Print Network (OSTI)

China. ” Energy& Buildings 40 (12): 2121-2127. Zhou N. ,Scenarios of Commercial Building Energy Consumption inbuilding energy retrofits, and building energy control

Zhou, Nan

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Building Energy Software Tools Directory: New Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Auditing & Sales Tool, home energy assessments, energy analysis, home performance, residential retrofits 2013-05-17 MyVerdafero Utility Optimization, building performance,...

262

Building Technologies Office: Data Centers and Servers  

NLE Websites -- All DOE Office Websites (Extended Search)

AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange...

263

Building Technologies Office: Technology Performance Exchange...  

NLE Websites -- All DOE Office Websites (Extended Search)

AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange...

264

Building Technologies Office: National Residential Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

at all levels. The data from the efficiency measures database is used in the Building Energy Optimization (BEopt) software. Benefits The National Retrofit Measures Database...

265

Cook County- LEED Requirements for County Buildings  

Energy.gov (U.S. Department of Energy (DOE))

In 2002, Cook County enacted an ordinance requiring all new county buildings and all retrofitted county buildings to be built to LEED standards. Specifically, all newly constructed buildings and...

266

Building Energy Software Tools Directory: RESEM  

NLE Websites -- All DOE Office Websites (Extended Search)

RESEM RESEM RESEM logo. A simulation-based tool developed to allow the DOE Institutional Conservation Program (ICP) staff and participants to reliably determine the energy savings directly attributable to ICP-supported retrofit measures implemented in a building. RESEM (Retrofit Energy Savings Estimation Model) calculates long-term energy savings directly from actual utility data, with corrections for weather and use variations between the pre-retrofit and post-retrofit utility data collection periods. Keywords retrofit, institutional buildings Validation/Testing N/A Expertise Required Moderate level of computer literacy; familiarity with building energy concepts. Users Over 50. Audience Building managers and energy retrofit engineers. Input Minimal required input includes: original year of building construction,

267

Group Home Energy Efficiency Retrofit for 30% Energy Savings: Washington, D.C. (Fact Sheet)  

SciTech Connect

Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes - such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost-effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study's results will be used to identify cost effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

Not Available

2013-11-01T23:59:59.000Z

268

Natural Cooling Retrofit  

E-Print Network (OSTI)

Substantial numbers of existing plants and buildings are found to depend solely upon Mechanical Cooling even though Natural Cooling techniques could be employed utilizing ambient air. Most of these facilities were constructed without Natural Cooling capability due to 'first cost' budget constraints when the cost and availability of energy were of little concern.

Fenster, L. C.; Grantier, A. J.

1981-01-01T23:59:59.000Z

269

The RFF Home Energy Audit and Retrofit Survey...............................................................  

E-Print Network (OSTI)

Commercial and residential buildings are responsible for 42 percent of all U.S. energy consumption and 41 percent of U.S. CO2 emissions. Engineering studies identify several investments in new enegy-efficiency equipment or building retrofits that would more than pay for themselves in terms of lower future energy costs, but homeowners and businesses generally do not have good information about how to take advantage of these opportunities. Energy auditors make up a growing industry of professionals who evaluate building energy use and provide this information to building owners. This paper reports the results of a survey of nearly 500 home energy auditors and contractors that Resources for the Future conducted in summer 2011. The survey asked about the characteristics of these businesses and the services they provide, the degree to which homeowners follow up on their recommendations, and the respondents ’ opinions on barriers to home energy retrofits and the role for government. Findings from the survey suggest that the audit industry only partially is filling the information gap. Not enough homeowners know about or understand audits, and the follow-through on recommendations once they do have audits is incomplete. But the survey findings suggest that low energy prices and the high cost of retrofits may be more responsible for these outcomes than failures of information.

Karen Palmer; Margaret Walls; Hal Gordon; Todd Gerarden

2011-01-01T23:59:59.000Z

270

PSNH - Small Business Retrofit Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small Business Retrofit Program PSNH - Small Business Retrofit Program Eligibility Commercial Savings For Other Construction Commercial Heating & Cooling Commercial Weatherization...

271

Exterior Insulation and Overclad Retrofits  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exterior Insulation & Overclad Exterior Insulation & Overclad Retrofits Residential Energy Efficiency Stakeholder Meeting March 2, 2012 - Austin, TX Residential Energy Efficiency Stakeholder Meeting March 2, 2012 | Austin, TX 2  Incredible practical experience:  New construction - nearly a century  Retrofit applications - many decades Exterior Insulation Residential Energy Efficiency Stakeholder Meeting March 2, 2012 | Austin, TX 3 1980s ON - a "weird" builder Residential Energy Efficiency Stakeholder Meeting March 2, 2012 | Austin, TX 4 1990s ON - a "good" builder Residential Energy Efficiency Stakeholder Meeting March 2, 2012 | Austin, TX 5 2000s ON - a "typical" builder Residential Energy Efficiency Stakeholder Meeting March 2, 2012 | Austin, TX 6

272

Cool Energy House - An Intro to the Cool Energy House Retrofit Demonstration Project Webinar  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

eere.energy.gov eere.energy.gov Building America: Introduction November 14, 2011 Cheryn Engebrecht Cheryn.engebrecht@nrel.gov Building Technologies Program Building Technologies Program eere.energy.gov * Reduce energy use in new and existing residential buildings * Promote building science and systems engineering / integration approach * "Do no harm": Ensure safety, health and durability are maintained or improved * Accelerate adoption of high performance technologies www.buildingamerica.gov Introduction to Building America Building Technologies Program eere.energy.gov Building America Industry Consortia Industry Research Teams Habitat Cost Effective Energy Retrofit Program NorthernSTAR Building America Partnership

273

Newporter Apartments: Deep Energy Retrofit Short-Term Results  

SciTech Connect

This project demonstrates a path to meet the goal of the Building America program to reduce home energy use by 30% in multi-family buildings. The project demonstrates cost effective energy savings targets as well as improved comfort and indoor environmental quality (IEQ) associated with deep energy retrofits by a large public housing authority as part of a larger rehabilitation effort. The project focuses on a typical 1960's vintage low-rise multi-family apartment community (120 units in three buildings).

Gordon, A.; Howard, L.; Kunkle, R.; Lubliner, M.; Auer, D.; Clegg, Z.

2012-12-01T23:59:59.000Z

274

NREL Improves Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet)  

SciTech Connect

This technical highlight describes NREL research to develop Building Energy Simulation Test for Existing Homes (BESTEST-EX) to increase the quality and accuracy of energy analysis tools for the building retrofit market. Researchers at the National Renewable Energy Laboratory (NREL) have developed a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market. The Building Energy Simulation Test for Existing Homes (BESTEST-EX) is a test procedure that enables software developers to evaluate the performance of their audit tools in modeling energy use and savings in existing homes when utility bills are available for model calibration. Similar to NREL's previous energy analysis tests, such as HERS BESTEST and other BESTEST suites included in ANSI/ASHRAE Standard 140, BESTEST-EX compares software simulation findings to reference results generated with state-of-the-art simulation tools such as EnergyPlus, SUNREL, and DOE-2.1E. The BESTEST-EX methodology: (1) Tests software predictions of retrofit energy savings in existing homes; (2) Ensures building physics calculations and utility bill calibration procedures perform to a minimum standard; and (3) Quantifies impacts of uncertainties in input audit data and occupant behavior. BESTEST-EX includes building physics and utility bill calibration test cases. The diagram illustrates the utility bill calibration test cases. Participants are given input ranges and synthetic utility bills. Software tools use the utility bills to calibrate key model inputs and predict energy savings for the retrofit cases. Participant energy savings predictions using calibrated models are compared to NREL predictions using state-of-the-art building energy simulation programs.

2012-01-01T23:59:59.000Z

275

NREL Improves Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet)  

DOE Green Energy (OSTI)

This technical highlight describes NREL research to develop Building Energy Simulation Test for Existing Homes (BESTEST-EX) to increase the quality and accuracy of energy analysis tools for the building retrofit market. Researchers at the National Renewable Energy Laboratory (NREL) have developed a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market. The Building Energy Simulation Test for Existing Homes (BESTEST-EX) is a test procedure that enables software developers to evaluate the performance of their audit tools in modeling energy use and savings in existing homes when utility bills are available for model calibration. Similar to NREL's previous energy analysis tests, such as HERS BESTEST and other BESTEST suites included in ANSI/ASHRAE Standard 140, BESTEST-EX compares software simulation findings to reference results generated with state-of-the-art simulation tools such as EnergyPlus, SUNREL, and DOE-2.1E. The BESTEST-EX methodology: (1) Tests software predictions of retrofit energy savings in existing homes; (2) Ensures building physics calculations and utility bill calibration procedures perform to a minimum standard; and (3) Quantifies impacts of uncertainties in input audit data and occupant behavior. BESTEST-EX includes building physics and utility bill calibration test cases. The diagram illustrates the utility bill calibration test cases. Participants are given input ranges and synthetic utility bills. Software tools use the utility bills to calibrate key model inputs and predict energy savings for the retrofit cases. Participant energy savings predictions using calibrated models are compared to NREL predictions using state-of-the-art building energy simulation programs.

Not Available

2012-01-01T23:59:59.000Z

276

Breaking new ground in building green : the role of city policy and regulation in a building industry market transformation  

E-Print Network (OSTI)

With a growing awareness of the need for a widespread reduction in the use of natural resources, including energy and water, buildings have been identified as a key component of America's, and the world's, drain on these ...

Prakash, Shiva R

2010-01-01T23:59:59.000Z

277

System/Building Tech Integration | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

System/Building Integration System/Building Integration SHARE System Building Technologies Integration ZEBRAlliance home The buildings industry encompasses numerous designers, builders, construction materials and components manufacturers, distributors, dealers, and other vendors and service providers. Whether coming together for new construction or retrofitting established structures, these stakeholders often face research limitations and challenges when integrating components, equipment, and systems. This is especially true for anything that is new. System/Building Integration provides the means for our industry partners to work out the wrinkles in their new products in low-risk, realistic test bed environments before market introduction. In ORNL's residential and light commercial building test beds, in addition to natural exposure to weather,

278

High Energy-Efficiency Retrofits to Baltimore's Row Homes  

SciTech Connect

The purpose of the research project is to develop high-perfommnce, energy-eflicient retrofits of existing row homes in Baltimore, Maryland. These efficiency enhancements are to optimize building envelope improvements, mechanical equipment improvements and operational improvements to the highest cost-effective level. Furthermore, this project is to investigate and demonstrate the impact of high-performance energy-efficiency retrofit improvements on row homes in the Historic East area of Baltimore. Three homes awaiting renovation are planned to receive building envelope, mechanical system, and electrical system improvements that will improve their energy petiormance. An incremental additional cost ceiling of $4000 for the energy eftlciency improvements, beyond those normally installed, has been set by the project.

Chalk, J.; Johnson, A.L.; Lipscomb, L.; Wendt, R.

1999-04-19T23:59:59.000Z

279

Improving Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet)  

SciTech Connect

New test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools that calculate optimal packages of efficiency measures. To improve the accuracy of energy analysis for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team developed the Building Energy Simulation Test for Existing Homes (BESTEST-EX), a method for diagnosing and correcting errors in building energy audit software and calibration procedures. BESTEST-EX consists of building physics and utility bill calibration test cases, which software developers can use to compare their tools simulation findings to reference results generated with state-of-the-art simulation tools. Overall, the BESTEST-EX methodology: (1) Tests software predictions of retrofit energy savings in existing homes; (2) Ensures building physics calculations and utility bill calibration procedures perform to a minimum standard; and (3) Quantifies impacts of uncertainties in input audit data and occupant behavior. BESTEST-EX is helping software developers identify and correct bugs in their software, as well as develop and test utility bill calibration procedures.

Not Available

2012-02-01T23:59:59.000Z

280

Improving Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet)  

SciTech Connect

New test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools that calculate optimal packages of efficiency measures. To improve the accuracy of energy analysis for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team developed the Building Energy Simulation Test for Existing Homes (BESTEST-EX), a method for diagnosing and correcting errors in building energy audit software and calibration procedures. BESTEST-EX consists of building physics and utility bill calibration test cases, which software developers can use to compare their tools simulation findings to reference results generated with state-of-the-art simulation tools. Overall, the BESTEST-EX methodology: (1) Tests software predictions of retrofit energy savings in existing homes; (2) Ensures building physics calculations and utility bill calibration procedures perform to a minimum standard; and (3) Quantifies impacts of uncertainties in input audit data and occupant behavior. BESTEST-EX is helping software developers identify and correct bugs in their software, as well as develop and test utility bill calibration procedures.

2012-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Bottom-up characterisation of the Spanish building stock – Archetype buildings and energy demand.  

E-Print Network (OSTI)

??In developed economies, such as the European Union’s member states, the largest potential for energy efficiency improvements lies in retrofitting existing buildings. Yet, there is… (more)

Medina Benejam, Georgina

2011-01-01T23:59:59.000Z

282

Cold Climate Building Enclosure Solutions  

SciTech Connect

This project investigates the energy performance and cost effectiveness of several state-of-the-art retrofit strategies that could be used in triple-deckers and colonial houses, common house types in New England. Several emerging building enclosure technologies were integrated, including high R-value aerogel and vacuum insulations, in forms that would be energy efficient, flexible for different retrofit scenarios, durable, and potentially cost-competitive for deep energy retrofits.

Kosny, J.; Fallahi, A.; Shukla, N.

2013-01-01T23:59:59.000Z

283

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance, K-12 Schools (Book)  

SciTech Connect

The U.S. Department of Energy developed the K-12 Advanced Energy Retrofit Guide to provide specific methodologies, information, and guidance to help energy managers and other stakeholders plan and execute energy efficiency improvements. We emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluation of the most promising retrofit measure for each building type. K-12 schools were selected as one of the highest priority building sectors, because schools affect the lives of most Americans. They also represent approximately 8% of the energy use and 10% of the floor area in commercial buildings.

Not Available

2013-02-01T23:59:59.000Z

284

Commercial Building Partnerships Replication and Diffusion  

SciTech Connect

This study presents findings from survey and interview data investigating replication efforts of Commercial Building Partnership (CBP) partners that worked directly with the Pacific Northwest National Laboratory (PNNL). PNNL partnered directly with 12 organizations on new and retrofit construction projects, which represented approximately 28 percent of the entire U.S. Department of Energy (DOE) CBP program. Through a feedback survey mechanism, along with personal interviews, PNNL gathered quantitative and qualitative data relating to replication efforts by each organization. These data were analyzed to provide insight into two primary research areas: 1) CBP partners’ replication efforts of technologies and approaches used in the CBP project to the rest of the organization’s building portfolio (including replication verification), and, 2) the market potential for technology diffusion into the total U.S. commercial building stock, as a direct result of the CBP program. The first area of this research focused specifically on replication efforts underway or planned by each CBP program participant. Factors that impact replication include motivation, organizational structure and objectives firms have for implementation of energy efficient technologies. Comparing these factors between different CBP partners revealed patterns in motivation for constructing energy efficient buildings, along with better insight into market trends for green building practices. The second area of this research develops a diffusion of innovations model to analyze potential broad market impacts of the CBP program on the commercial building industry in the United States.

Antonopoulos, Chrissi A.; Dillon, Heather E.; Baechler, Michael C.

2013-09-16T23:59:59.000Z

285

Bay Ridge Gardens - Mixed-Humid Affordable Multifamily Housing Deep Energy Retrofit  

SciTech Connect

Under this project, Newport Partners (as part of the BA-PIRC research team) evaluated the installation, measured performance, and cost-effectiveness of efficiency upgrade measures for a tenant-in-place DER at the Bay Ridge multifamily (MF) development in Annapolis, Maryland. The design and construction phase of the Bay Ridge project was completed in August 2012. This report summarizes system commissioning, short-term test results, utility bill data analysis, and analysis of real-time data collected over a one-year period after the retrofit was complete. The Bay Ridge project is comprised of a 'base scope' retrofit which was estimated to achieve a 30%+ savings (relative to pre-retrofit) on 186 apartments, and a 'DER scope' which was estimated to achieve 50% savings (relative to pre-retrofit) on a 12-unit building. The base scope was applied to the entire apartment complex, except for one 12-unit building which underwent the DER scope. A wide range of efficiency measures was applied to pursue this savings target for the DER building, including improvements/replacements of mechanical equipment and distribution systems, appliances, lighting and lighting controls, the building envelope, hot water conservation measures, and resident education. The results of this research build upon the current body of knowledge of multifamily retrofits. Towards this end, the research team has collected and generated data on the selection of measures, their estimated performance, their measured performance, and risk factors and their impact on potential measures.

Lyons, J.; Moore, M.; Thompson, M.

2013-08-01T23:59:59.000Z

286

Energy Market Profiles: Volume 2: 1995 Residential Buildings, Appliances, and Energy Use  

Science Conference Proceedings (OSTI)

Energy use and equipment profiles at the region, segment, and end-use levels provide key information required to lay the groundwork for major marketing decisions. These decisions include how desirable a market is for utility entry, how quickly to enter a market, and how to best narrow a research focus. This study provides utility managers and decision makers with residential market profiles for 10 regions in the United States. This report is available only to funders of Program 101A or 101.001. Funders m...

1999-01-05T23:59:59.000Z

287

Energy Market Profiles: Volume 1: 1995 Commercial Buildings, Equipment, and Energy Use  

Science Conference Proceedings (OSTI)

Energy use and equipment profiles at the region, segment, and end-use levels provide key information required to lay the groundwork for major marketing decisions. These decisions include how desirable a market is for utility entry, how quickly to enter a market, and how to best narrow a research focus. This study provides utility managers and decision makers with commercial market profiles for 10 regions in the United States. This report is available only to funders of Program 101A or 101.001. Funders ma...

1999-01-05T23:59:59.000Z

288

Energy Market Profiles: Volume 3: 1998 Industrial Buildings, Equipment, and Energy Use  

Science Conference Proceedings (OSTI)

Energy use and equipment profiles at the region, segment, and end-use levels provide key information required to lay the groundwork for major marketing decisions. These decisions include how desirable a market is for utility entry, how quickly to enter a market, and how best to narrow the research focus. This study provides utility managers and decision makers with industrial market profiles for 10 regions of the United States. This report is available only to funders of Program 101A or 101.001. Funders ...

1999-12-03T23:59:59.000Z

289

Energy Market Profiles: Volume 1: 1998 Commercial Buildings, Equipment, and Energy Use  

Science Conference Proceedings (OSTI)

Energy use and equipment profiles at the region, segment, and end-use levels provide key information required to lay the groundwork for major marketing decisions. These decisions include how desirable a market is for utility entry, how quickly to enter a market, and how best to narrow the research focus. This study provides utility managers and decision makers with commercial market profiles for 10 regions of the United States. This report is available only to funders of Program 101A or 101.001. Funders ...

1999-12-02T23:59:59.000Z

290

Energy Market Profiles: Volume 2: 1998 Residential Buildings, Appliances, and Energy Use  

Science Conference Proceedings (OSTI)

Energy use and equipment profiles at the regional, segment, and end-use levels provide key information required to lay the groundwork for major marketing decisions. These decisions include how desirable a market is for utility entry, how quickly to enter a market, and how to best narrow a research focus. This study provides utility managers and decision makers with residential market profiles for ten regions of the United States. This report is available only to funders of Program 101A or 101.001. Funder...

1999-12-02T23:59:59.000Z

291

Building Technologies Office: Buildings Performance Database Analysis Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings Performance Buildings Performance Database Analysis Tools to someone by E-mail Share Building Technologies Office: Buildings Performance Database Analysis Tools on Facebook Tweet about Building Technologies Office: Buildings Performance Database Analysis Tools on Twitter Bookmark Building Technologies Office: Buildings Performance Database Analysis Tools on Google Bookmark Building Technologies Office: Buildings Performance Database Analysis Tools on Delicious Rank Building Technologies Office: Buildings Performance Database Analysis Tools on Digg Find More places to share Building Technologies Office: Buildings Performance Database Analysis Tools on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides

292

Building Technologies Office: Building Energy Data Exchange Specification  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Data Building Energy Data Exchange Specification to someone by E-mail Share Building Technologies Office: Building Energy Data Exchange Specification on Facebook Tweet about Building Technologies Office: Building Energy Data Exchange Specification on Twitter Bookmark Building Technologies Office: Building Energy Data Exchange Specification on Google Bookmark Building Technologies Office: Building Energy Data Exchange Specification on Delicious Rank Building Technologies Office: Building Energy Data Exchange Specification on Digg Find More places to share Building Technologies Office: Building Energy Data Exchange Specification on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides

293

NREL Improves Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet), Building America: Technical Highlight, Building Technologies Program (BTP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Improves Improves Building Energy Simulation Programs Through Diagnostic Testing Researchers at the National Renewable Energy Laboratory (NREL) have developed a new test procedure to increase the quality and accuracy of energy analysis tools for the building retrofit market. The Building Energy Simulation Test for Existing Homes (BESTEST-EX) is a test procedure that enables software developers to evaluate the performance of their audit tools in modeling energy use and savings in existing homes when utility bills are available for model cali- bration. Similar to NREL's previous energy analysis tests, such as HERS BESTEST and other BESTEST suites included in ANSI/ASHRAE Standard 140, BESTEST-EX compares soft- ware simulation findings to reference results generated with state-of-the-art

294

ARRA Proposed Award: Retrofit Bay Area  

E-Print Network (OSTI)

Climate Protection Authority Partnering Clean Energy Workforce Training Program: California Building; residential training and certification will conform to the national Home Performance with Energy Star Program of homeowner incentives, including utility rebates. Marketing and outreach messaging will promote Tier 3 whole

295

Results from Development of Model Specifications for Multifamily Energy Retrofits  

SciTech Connect

Specifications, modeled after CSI MasterFormat, provide the trade contractors and builders with requirements and recommendations on specific building materials, components and industry practices that comply with the expectations and intent of the requirements within the various funding programs associated with a project. The goal is to create a greater level of consistency in execution of energy efficiency retrofits measures across the multiple regions a developer may work. IBACOS and Mercy Housing developed sample model specifications based on a common building construction type that Mercy Housing encounters.

Brozyna, K.

2012-08-01T23:59:59.000Z

296

Cogeneration as a retrofit strategy  

SciTech Connect

The paper describes the retrofitting of cogeneration in industrial plants. The paper describes a cost analysis, feasibility analysis, prime movers, induction generation, developing load profile, and options and research. The prime movers discussed include gas turbines, back-pressure turbines, condensing turbines, extraction turbines, and single-stage turbines. A case history of an institutional-industrial application illustrates the feasibility and benefits of a cogeneration system.

Meckler, M. [Meckler Group, Los Angeles, CA (United States)

1996-06-01T23:59:59.000Z

297

Market leadership by example: Government sector energy efficiency in developing countries  

E-Print Network (OSTI)

Saving Capital Projects • Energy audits • Retrofit projects: lighting,savings goals and reporting requirements) Philippines (GEMP goals) Brazil (low- interest loans to retrofit public buildings) Colombia and Argentina (street lighting)

2002-01-01T23:59:59.000Z

298

Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S.  

E-Print Network (OSTI)

annual benchmarks for energy usage levels across propertythe actual and predicted energy usage of the building usingof the tenant’s actual energy usage. For this reason, modi?

Jaffee, Dwight M.; Stanton, Richard; Wallace, Nancy E.

2010-01-01T23:59:59.000Z

299

National Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry (Fact Sheet)  

DOE Green Energy (OSTI)

This technical highlight describes NREL research to develop a publicly available database of energy retrofit measures containing performance characteristics and cost estimates for nearly 3,000 measures. Researchers at the U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) have developed the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures. The data are available for use in software programs that evaluate cost-effective retrofit measures to improve the energy efficiency of residential buildings. The database provides a single, consistent source of current data for DOE and private-sector energy audit and simulation software tools and the retrofit industry. The database will reduce risk for residential retrofit industry stakeholders by providing a central, publicly vetted source of up-to-date information.

Not Available

2012-01-01T23:59:59.000Z

300

Buildings Energy Data Book: 3.7 Retail Markets and Companies  

Buildings Energy Data Book (EERE)

6 6 Energy Benchmarks for Newly Constructed Retail Buildings, by Selected City and End-Use (thousand Btu per square foot) IECC Climate Zone Miami 1A Houston 2A Phoenix 2B Atlanta 3A Los Angeles 3B Las Vegas 3B San Francisco 3C Baltimore 4A Albuquerque 4B Seattle 4C Chicago 5A Boulder 5B Minneapolis 6A Helena 6B Duluth 7 Fairbanks 8 Note(s): Source(s): 108.9 0.1 9.4 Commercial building energy benchmarks are based off of the current stock of commercial buildings and reflect 2004 ASHRAE 90.1 Climate Zones. They are designed to provide a consistent baseline to compare building performance in energy-use simulations. The benchmark building had 24,683 square feet and 1 floor. Benchmark interior lighting energy = 19.2 thousand Btu/SF. Interior equipment energy consumption = 7.63 thousand Btu/SF.

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Expert Meeting Report: Retrofit Implementation - A Neighborhood at a Time  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofit Implementation - Retrofit Implementation - A Neighborhood at a Time Dianne Griffiths Consortium for Advanced Residential Buildings (CARB) April 2012 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affiliated partners makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply

302

Wind Turbine Retrofits: An Overview and Economic Analysis of Onshore Retrofit Options Available for Wind Turbines  

Science Conference Proceedings (OSTI)

This report provides an overview of some of the most promising retrofits available to turbine owners today. The retrofits discussed are those offered by original turbine manufacturers and by third parties; the retrofits deal with rotor blades, pitch and yaw systems, gearboxes and other drive train components, electrical generators, power converters, controls, sensors and monitoring equipment, and others.From the many retrofits discussed, six that showed material near-term potential were ...

2013-11-19T23:59:59.000Z

303

Residential Deep Energy Retrofits: Monitoring and Performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Retrofits are residential remodeling projects, which attempt to drastically reduce energy usage and environmental impact, as well as increase occupant comfort and improve...

304

Golden Valley Electric Association - Commercial Lighting Retrofit...  

Open Energy Info (EERE)

on Facebook icon Twitter icon Golden Valley Electric Association - Commercial Lighting Retrofit Rebate Program (Alaska) This is the approved revision of this page, as well...

305

OTEC- Commercial Lighting Retrofit Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

The Oregon Trail Electric Consumers Cooperative (OTEC) offers a commercial lighting retrofit program that provides rebates for commercial businesses that change existing lighting to more energy...

306

SPP marketing flyer for governments and schools | ENERGY STAR Buildings &  

NLE Websites -- All DOE Office Websites (Extended Search)

governments and schools governments and schools Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder

307

SPP marketing flyer for data centers | ENERGY STAR Buildings & Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

data centers data centers Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder Technical documentation

308

SPP marketing flyer for corporate real estate | ENERGY STAR Buildings &  

NLE Websites -- All DOE Office Websites (Extended Search)

corporate real estate corporate real estate Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories Target Finder Technical documentation

309

Building Technologies Office: Energy-Efficient and Comfortable...  

NLE Websites -- All DOE Office Websites (Extended Search)

energy consumption in retrofit and new commercial buildings by developing integrated energy optimization control systems for electric lighting, daylight, and local heating,...

310

Building Technologies Office: Building America: Bringing Building  

NLE Websites -- All DOE Office Websites (Extended Search)

America: Bringing Building Innovations to Market America: Bringing Building Innovations to Market Building America logo The U.S. Department of Energy's (DOE) Building America program has been a source of innovations in residential building energy performance, durability, quality, affordability, and comfort for more than 15 years. This world-class research program partners with industry (including many of the top U.S. home builders) to bring cutting-edge innovations and resources to market. For example, the Solution Center provides expert building science information for building professionals looking to gain a competitive advantage by delivering high performance homes. At Building America meetings, researchers and industry partners can gather to generate new ideas for improving energy efficiency of homes. And, Building America research teams and DOE national laboratories offer the building industry specialized expertise and new insights from the latest research projects.

311

Building Technologies Office: Commercial Building Research  

NLE Websites -- All DOE Office Websites (Extended Search)

to someone by E-mail to someone by E-mail Share Building Technologies Office: Commercial Building Research on Facebook Tweet about Building Technologies Office: Commercial Building Research on Twitter Bookmark Building Technologies Office: Commercial Building Research on Google Bookmark Building Technologies Office: Commercial Building Research on Delicious Rank Building Technologies Office: Commercial Building Research on Digg Find More places to share Building Technologies Office: Commercial Building Research on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score Energy Modeling Software Global Superior Energy Performance Partnership

312

Buildings  

Energy.gov (U.S. Department of Energy (DOE))

The U.S. Department of Energy (DOE) advances building energy performance through the development and promotion of efficient, affordable, and high impact technologies, systems, and practices. The...

313

A systems approach to retrofitting residential HVAC systems  

E-Print Network (OSTI)

Retrofit Guide for Military Family Housing: Energy-EfficientPractices Guide includes references to DOE’s Home Energyguide the user to specific retrofit packages that maximize retrofit energy

McWilliams, J.A.; Walker, I.S.

2004-01-01T23:59:59.000Z

314

Image Recognition System for Automated Lighting Retrofit Assessment  

E-Print Network (OSTI)

Buildings are responsible for approximately 40% of all US energy use and carbon emissions. Lighting technologies continue to evolve, leading to potential energy savings through retrofits of lighting systems. Building lighting systems is typically the first item evaluated by commercial and industrial energy auditors. This paper presents the first phase of a project to develop unmanned aerial and ground vehicles capable of conducting autonomous energy audits of commercial buildings. The paper presents a prototype system that can enumerate and classify the lighting in a building using an optical camera, accelerometer, spectrometer, and distance sensor. As the aerial vehicle navigates throughout a room, the prototype system captures images and collects frequency data of lighting. The system employs image recognition techniques to quantify lighting in each room. Using the unique frequency spectrum of each lighting type, the prototype system classifies the different types of lighting with the spectrometer. An accompanying software program then analyzes the quantity and type of lighting to recommend economical alternatives, or lighting retrofits.

Venable, K.; Bhatia, D.; Coverick, R.; Gutierrez, C.; Knight, J.; McGarry, D.; McGee, K.; Smith, Z.; Terrill, T. J.; Vanderford, B.; Weiser, R.; Wightman, K.; Rasmussen, B. P.

2013-01-01T23:59:59.000Z

315

Field Assessment of Energy Audit Tools for Retrofit Programs  

SciTech Connect

This project focused on the use of home energy ratings as a tool to promote energy retrofits in existing homes. A home energy rating provides a quantitative appraisal of a home's asset performance, usually compared to a benchmark such as the average energy use of similar homes in the same region. Home rating systems can help motivate homeowners in several ways. Ratings can clearly communicate a home's achievable energy efficiency potential, provide a quantitative assessment of energy savings after retrofits are completed, and show homeowners how they rate compared to their neighbors, thus creating an incentive to conform to a social standard. An important consideration is how rating tools for the retrofit market will integrate with existing home energy service programs. For residential programs that target energy savings only, home visits should be focused on key efficiency measures for that home. In order to gain wide adoption, a rating tool must be easily integrated into the field process, demonstrate consistency and reasonable accuracy to earn the trust of home energy technicians, and have a low monetary cost and time hurdle for homeowners. Along with the Home Energy Score, this project also evaluated the energy modeling performance of SIMPLE and REM/Rate.

Edwards, J.; Bohac, D.; Nelson, C.; Smith, I.

2013-07-01T23:59:59.000Z

316

Field Assessment of Energy Audit Tools for Retrofit Programs  

SciTech Connect

This project focused on the use of home energy ratings as a tool to promote energy retrofits in existing homes. A home energy rating provides a quantitative appraisal of a home's asset performance, usually compared to a benchmark such as the average energy use of similar homes in the same region. Home rating systems can help motivate homeowners in several ways. Ratings can clearly communicate a home's achievable energy efficiency potential, provide a quantitative assessment of energy savings after retrofits are completed, and show homeowners how they rate compared to their neighbors, thus creating an incentive to conform to a social standard. An important consideration is how rating tools for the retrofit market will integrate with existing home energy service programs. For residential programs that target energy savings only, home visits should be focused on key efficiency measures for that home. In order to gain wide adoption, a rating tool must be easily integrated into the field process, demonstrate consistency and reasonable accuracy to earn the trust of home energy technicians, and have a low monetary cost and time hurdle for homeowners. Along with the Home Energy Score, this project also evaluated the energy modeling performance of SIMPLE and REM/Rate.

Edwards, J.; Bohac, D.; Nelson, C.; Smith, I.

2013-07-01T23:59:59.000Z

317

The Role of Daylight in Achieving Ultra-Low-Energy Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Daylight in Achieving Daylight in Achieving Ultra-Low-Energy Buildings May 6, 2011 Neall Digert, Ph.D., MIES Vice President of Product Enterprise Solatube International, Inc. Countries around the globe are experiencing an energy crisis! The World's enormous design and construction market is focused on energy-efficient retrofit and innovative, ultra-low energy new construction. The desire to halt global warming is creating an awareness and need for sustainable buildings, communities, and societies. Energy Policy is at the forefront of governmental initiatives in nearly every country. China needs to increase its generation capacity by over 1,312 GW between 2006 and 2030. Source: International Energy Agency, "World

318

Occupant-in-Place Energy Efficiency Retrofit in a Group Home for 30% Energy Savings in Climate Zone 4  

SciTech Connect

Energy efficiency retrofits (EERs) face many challenges on the path to scalability. Limited budgets, cost effectiveness, risk factors, and accessibility impact the type and the extent of measures that can be implemented feasibly to achieve energy savings goals. Group home retrofits can face additional challenges than those in single family homes - such as reduced access (occupant-in-place restrictions) and lack of incentives for occupant behavioral change. This project studies the specification, implementation, and energy savings from an EER in a group home, with an energy savings goal of 30%. This short term test report chronicles the retrofit measures specified, their projected cost-effectiveness using building energy simulations, and the short term test results that were used to characterize pre-retrofit and post-retrofit conditions. Additionally, the final report for the project will include analysis of pre- and post-retrofit performance data on whole building energy use, and an assessment of the energy impact of occupant interface with the building (i.e., window operation). Ultimately, the study's results will be used to identify cost effective EER measures that can be implemented in group homes, given constraints that are characteristic of these buildings. Results will also point towards opportunities for future energy savings.

Moore, M.

2013-08-01T23:59:59.000Z

319

Buildings Energy Data Book: 3.7 Retail Markets and Companies  

Buildings Energy Data Book (EERE)

8 8 Energy Benchmarks for Newly Constructed Supermarkets, by Selected City and End-Use (thousand Btu per square foot) Miami 1A Houston 2A Phoenix 2B Atlanta 3A Los Angeles 3B Las Vegas 3B San Francisco 3C Baltimore 4A Albuquerque 4B Seattle 4C Chicago 5A Boulder 5B Minneapolis 6A Helena 6B Duluth 7 Fairbanks 8 Note(s): Source(s): 145.6 0.3 0.6 20.5 Commercial building energy benchmarks are based off of the current stock of commercial buildings and reflect 2004 ASHRAE 90.1 Climate Zones. They are designed to provide a consistent baseline to compare building performance in energy-use simulations.The benchmark building had 44,985 square feet and 1 floor. Benchmark interior lighting energy = 19.7 thousand Btu/SF. Interior equipment energy consumption = 20.7 thousand Btu/SF. DOE/EERE/BT, Commercial Building Benchmark Models, Version 1.3_5.0, Nov. 2010, accessed January 2012 at

320

Advanced Energy Retrofit Guide (AERG): Practical Ways to Improve Energy Performance; Healthcare Facilities (Book)  

SciTech Connect

The Advanced Energy Retrofit Guide for Healthcare Facilities is part of a series of retrofit guides commissioned by the U.S. Department of Energy. By presenting general project planning guidance as well as detailed descriptions and financial payback metrics for the most important and relevant energy efficiency measures (EEMs), the guides provide a practical roadmap for effectively planning and implementing performance improvements in existing buildings. The Advanced Energy Retrofit Guides (AERGs) are intended to address key segments of the U.S. commercial building stock: retail stores, office buildings, K-12 schools, grocery stores, and healthcare facilities. The guides' general project planning considerations are applicable nationwide; the energy and cost savings estimates for recommended EEMs were developed based on energy simulations and cost estimates for an example hospital tailored to five distinct climate regions. These results can be extrapolated to other U.S. climate zones. Analysis is presented for individual EEMs, and for packages of recommended EEMs for two project types: existing building commissioning projects that apply low-cost and no-cost measures, and whole-building retrofits involving more capital-intensive measures.

Hendron, R.; Leach, M.; Bonnema, E.; Shekhar, D.; Pless, S.

2013-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Pages that link to "CPS Energy - Small Business Lighting Retrofit...  

Open Energy Info (EERE)

on Facebook icon Twitter icon Pages that link to "CPS Energy - Small Business Lighting Retrofit Program (Texas)" CPS Energy - Small Business Lighting Retrofit Program...

322

Changes related to "CPS Energy - Small Business Lighting Retrofit...  

Open Energy Info (EERE)

on Facebook icon Twitter icon Changes related to "CPS Energy - Small Business Lighting Retrofit Program (Texas)" CPS Energy - Small Business Lighting Retrofit Program...

323

Street and Parking Facility Lighting Retrofit Financial Analysis...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Street and Parking Facility Lighting Retrofit Financial Analysis Tool Webinar Street and Parking Facility Lighting Retrofit Financial Analysis Tool Webinar August 22, 2013 1:00PM...

324

Retrofitting  

NLE Websites -- All DOE Office Websites (Extended Search)

communication skills and learn ways to explain the weatherization process to the homeowner. House as a System Trainees will understand the concept of weatherization, common...

325

Improving Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet), NREL Highlights, Research & Development, NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

test procedure evaluates quality and accuracy of energy test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools that calculate optimal packages of efficiency measures. To improve the accuracy of energy analysis for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team developed the Building Energy Simulation Test for Existing Homes (BESTEST-EX), a method for diagnosing and correcting errors in building energy audit software and calibration procedures. BESTEST-EX consists of building physics and utility bill calibration test cases, which soft-

326

Policy Building Blocks: Helping Policymakers Determine Policy Staging for the Development of Distributed PV Markets: Preprint  

DOE Green Energy (OSTI)

There is a growing body of qualitative and a limited body of quantitative literature supporting the common assertion that policy drives development of clean energy resources. Recent work in this area indicates that the impact of policy depends on policy type, length of time in place, and economic and social contexts of implementation. This work aims to inform policymakers about the impact of different policy types and to assist in the staging of those policies to maximize individual policy effectiveness and development of the market. To do so, this paper provides a framework for policy development to support the market for distributed photovoltaic systems. Next steps include mathematical validation of the framework and development of specific policy pathways given state economic and resource contexts.

Doris, E.

2012-04-01T23:59:59.000Z

327

Energy Factors, Leasing Structure and the Market Price of Office Buildings in the U.S.  

E-Print Network (OSTI)

Yes prices per square foot indicating that the cost effectper square foot and more variance in precipitation has a statistically significant positive effect on operating costsper square foot of office buildings that sold in arm-length-transactions between 2001 and 2010 on energy costs,

Jaffee, Dwight; Stanton, Richard; Wallace, Nancy

2012-01-01T23:59:59.000Z

328

Systems to Support Intelligent Building Management and Behavioral Programs: The State of the Market  

Science Conference Proceedings (OSTI)

The landscape of customer-facing enabling technologies is changing rapidly. The last few years have seen a rise in the growth of enabling technologies such as smart thermostats, plug load controls, and home energy management systems (HEMS).Our approach to understanding the state of the market of enabling technologies began with understanding the semantics: the term itself covers a whole category of devices, which we have classified as either control or feedback technologies, or a ...

2013-12-21T23:59:59.000Z

329

Financing arrangements and industrial organisation for new nuclear build in electricity markets  

E-Print Network (OSTI)

of the Finnish and French plants under construction –, but rising fossil fuel and CO2 prices are reviving interest in nuclear power. A potential nuclear power renaissance in liberalised electricity markets will face a number of hurdles associated... with the CO2 price in Europe. The attractiveness of carbon free technologies such as nuclear plant for a power producer is reinforced by the additional cost placed on fossil fuel generation technologies by climate policies and CO2 emissions pricing...

Finon, Dominique; Roques, Fabien A

330

The federal market for ESCO services: How does it measure up?  

E-Print Network (OSTI)

Savings by Market Segment and Retrofit Strategy -vertical lines represent 25 th /75 th quartile range -bars represent median values Lighting

Hopper, Nicole; Goldman, Charles; Birr, Dave

2004-01-01T23:59:59.000Z

331

Measuring energy-saving retrofits: Experiences from the Texas LoanSTAR program  

SciTech Connect

In 1988 the Governor`s Energy Management Center of Texas received approval from the US Department of Energy to establish a $98.6 million state-wide retrofit demonstration revolving loan program to fund energy-conserving retrofits in state, public school, and local government buildings. As part of this program, a first-of-its-kind, statewide Monitoring and Analysis Program (MAP) was established to verify energy and dollar savings of the retrofits, reduce energy costs by identifying operational and maintenance improvements, improve retrofit selection in future rounds of the LoanSTAR program, and initiate a data base of energy use in institutional and commercial buildings located in Texas. This report discusses the LoanSTAR MAP with an emphasis on the process of acquiring and analyzing data to measure savings from energy conservation retrofits when budgets are a constraint. This report includes a discussion of the program structure, basic measurement techniques, data archiving and handling, data reporting and analysis, and includes selected examples from LoanSTAR agencies. A summary of the program results for the first two years of monitoring is also included.

Haberl, J.S.; Reddy, T.A.; Claridge, D.E.; Turner, W.D.; O`Neal, D.L.; Heffington, W.M. [Texas A and M Univ., College Station, TX (United States). Energy Systems Lab.] [Texas A and M Univ., College Station, TX (United States). Energy Systems Lab.

1996-02-01T23:59:59.000Z

332

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book (EERE)

Construction Statistics of New Homes Completed/Placed Year Thousand Units Average SF Thousand Units Average SF 1980 234 1981 229 1982 234 1983 278 1984 288 1985 283 1986 256 1987 239 1988 224 1989 203 1990 195 1991 174 1992 212 1993 243 1994 291 1995 319 1996 338 1997 336 1998 374 1999 338 2000 281 2001 196 2002 174 2003 140 2004 124 2005 123 2006 112 2007 95 2008 81 2009 55 2010 50 Source(s): 496 2,392 155 1,172 701 DOC, 2010 Characteristics of New Housing, 2010, "Median and Average Square Feet of Floor Area in New Single-Family Houses Completed by Location", "Presence of Air-Conditioning in New Single Family Houses", "Number of Multifamily Units Completed by Number of Units Per Building", "Median and Average Square Feet of Floor Area in Units in New Multifamily Buildings Completed", "Placements of New Manufactured Homes by Region and Size of Home, 1980-

333

Buildings Energy Data Book: 3.7 Retail Markets and Companies  

Buildings Energy Data Book (EERE)

4 4 Advanced Energy Design Guide for Small Retail Buildings (1) Shell Percent Glass 0.4 Window (U-Factor 0.38-0.69 SHGC 0.40-0.44 Wall R-Value (2) 7.6-15.2 c.i. Roof R-Value Attic 30-60 Insulation Above Deck 15-25 c.i. Lighting Average Power Density (W/ft.^2) 1.3 System and Plant Heating Plant Gas Furnace(>225 kBtuh) 80% Combustion Efficiency Cooling Plant Air conditioner (>135-240 kBtuh) 10.8 EER/11.2 IPLV - 11.0 EER/11.5 IPLV Service Hot Water Gas Storage Water Heater (>75kBtuh) 90% Thermal Efficiency Note(s): Source(s): 1) Guide provides approximate parameters for constructing a building which is 30% more efficient than ASHRAE 90.1-1999. Ranges are due to climate zone dependencies. 2) Assumes a wall with heat content greaater than 7 Btu/ft^2. ASHRAE, Advanced Energy Design Guide for Small Retail Buildings, 2008

334

Residential Retrofit Program Design Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Technical Assistance Program Technical Assistance Program Residential Retrofit Program Design Guide May 2011 This work has been performed by the Vermont Energy Investment Corporation (VEIC) and Energy Futures Group (EFG), under the Contract No. 4200000341 with Oak Ridge National Laboratory which is managed by UT-Battelle, LLC under Contract with the US Department of Energy No. DE-AC05-00OR22725. This document was prepared in collaboration with a partnership of companies under this contract. The partnership is led by the Vermont Energy Investment Corporation (VEIC), and includes the following companies: American Council for an Energy Efficient Economy (ACEEE), Energy Futures Group (EFG), Midwest Energy Efficiency Alliance (MEEA), Northwest Energy Efficiency Alliance (NEEA), Northeast Energy Efficiency Partnership (NEEP), Natural

335

Retrofitting CO{sub 2} capture  

SciTech Connect

Retrofitting existing fossil-fueled plants with the first available carbon dioxide capture technologies could play an important role in paving the way for development of lower-cost, reliable carbon capture and storage systems. EPRI research is helping utilities better understand the engineering challenges and economic consequences. Studies are being conducted on retrofitting five different plants with advanced amine PCC technologies. Other studies include: process optimization studies; valuing operating flexibility; CO{sub 2} capture for CTCC plants; and assessing the impact of climate policy on retrofitting investment.

Weisel, J.

2009-07-01T23:59:59.000Z

336

Proven Performance of Seven Cold Climate Deep Retrofit Homes  

SciTech Connect

Seven test homes located in Massachusetts are examined within this report. The retrofit strategies of each home are presented along with a comparison of the pre- and post-retrofit airtightness achieved by the group. Pre- and post-retrofit utility bills were collected; energy models were used to estimate pre-retrofit energy use when bills were unavailable.

Osser, R.; Neuhauser, K.; Ueno, K.

2012-06-01T23:59:59.000Z

337

Building Technologies Office: Energy Efficient Buildings Hub  

NLE Websites -- All DOE Office Websites (Extended Search)

Efficient Buildings Hub Efficient Buildings Hub This model of a renovated historic building-Building 661-in Philadelphia will house the Energy Efficient Buildings Hub. The facility's renovation will serve as a best practices model for commercial building design, historic adaptive re-use, and energy efficiency innovation through continuous retrofit. The U.S. Department of Energy created the Energy Efficient Buildings Hub in Philadelphia, Pennsylvania to promote regional job creation and economic growth while also improving the energy efficiency of commercial buildings. Established in 2011, the Energy Efficient Buildings Hub seeks to demonstrate how innovating technologies can help building owners and operators can save money by adopting energy efficient technologies and techniques. The goal is to enable the nation to cut energy use in the commercial buildings sector by 20% by 2020.

338

Residential Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Apartment building exterior and interior Apartment building exterior and interior Residential Buildings EETD's research in residential buildings addresses problems associated with whole-building integration involving modeling, measurement, design, and operation. Areas of research include the movement of air and associated penalties involving distribution of pollutants, energy and fresh air. Contacts Max Sherman MHSherman@lbl.gov (510) 486-4022 Iain Walker ISWalker@lbl.gov (510) 486-4692 Links Residential Building Systems Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends High Technology and Industrial Systems Lighting Systems Residential Buildings Simulation Tools Sustainable Federal Operations

339

Alternative Fuels Data Center: Alternative Fuel Vehicle Retrofit Emissions  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Alternative Fuel Alternative Fuel Vehicle Retrofit Emissions Inspection Process to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuel Vehicle Retrofit Emissions Inspection Process on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuel Vehicle Retrofit Emissions Inspection Process on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle Retrofit Emissions Inspection Process on Google Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle Retrofit Emissions Inspection Process on Delicious Rank Alternative Fuels Data Center: Alternative Fuel Vehicle Retrofit Emissions Inspection Process on Digg Find More places to share Alternative Fuels Data Center: Alternative Fuel Vehicle Retrofit Emissions Inspection Process on AddThis.com...

340

Buildings Energy Data Book: 3.7 Retail Markets and Companies  

Buildings Energy Data Book (EERE)

3 3 2010 Top Supermarkets, by Sales 2010 All Commodity Supermarket Wal-Mart Stores 3,001 Kroger Co. 2,460 Safeway, Inc. 1,461 Supervalu, Inc. 1,504 Ahold USA, Inc. (Stop and Shop, Giant) 746 Publix Super Markets, Inc. 1,035 Delhaize America, Inc. (Food Lion) 1,641 H.E. Butt Grocery Co. (HEB) 291 Meijer Inc. 195 Great Atlantic & Pacific Tea Co. (Pathmark) 373 Note(s): Source(s): All commodity volume in this example represents the "annualized range of the estimated retail sales volume of all items sold at a retail site that pass through the retailer's cash registers. TDLinx ACV is an estimate based on best available data- a directional measure to be used as an indicator of store and account size, not an actual retail sales report". (Progressive Grocer) Progressive Grocer, 2011 Progressive Grocer Super 50

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

The Institutional Conservation Program: A Funding Option for Energy Retrofits  

E-Print Network (OSTI)

The Institutional Conservation Program (ICP) provides matching grants to K-12 schools, colleges/universities, and hospitals for energy-related retrofit studies and the implementation of capital projects identified, analyzed, and recommended by these studies. Although grant dollars for the program are still appropriated at the federal level, Petroleum Violation Escrow (PVE) monies returned to the states now provide the largest source of ICP funds for most states. The program is administered at the federal level by the Department of Energy and at the state level in Texas by the Governor's Energy Management Center. The purpose of the ICP is to assist eligible institutions in reducing energy consumption and its attendant costs. More specifically, the program gives an institution the financial incentive to hire a professional engineer to identify and analyze the most attractive package of energy retrofits for a given building. Matching financial assistance is then available for implementing part or all of the recommended measures. Typical projects funded through the program include computerized energy management systems, lighting system change-outs, boiler modifications, and HVAC change-outs and modifications. Funded projects must have a payback of 2-10 years and must be installed in buildings completed and occupied before April 20, 1977. All applications submitted for funding consideration are subject to a programmatic and technical review. Applications compete for available monies according to specific criteria set for Technical Assistance Grants (study grants) and Energy Conservation Measures Grants (retrofit implementation grants). Since 1979 ten ICP funding cycles have been held in Texas, and a program cycle funded by PVE dollars returned to the state is currently in progress. An eleventh funding cycle, using federally appropriated dollars, and a second "oil overcharge" cycle are anticipated for FY 89.

Roberts, M.

1988-01-01T23:59:59.000Z

342

Buildings Energy Data Book: 3.7 Retail Markets and Companies  

Buildings Energy Data Book (EERE)

5 5 Energy Benchmarks for Existing Retail Buildings, by Selected City and End-Use (thousand Btu per square foot) IECC Post Pre Post Pre Post Pre Miami 1A 0.5 0.7 23.0 25.2 14.3 16.1 Houston 2A 11.6 12.4 16.2 18.9 14.6 16.9 Phoenix 2B 8.3 10.2 17.2 21.3 14.2 17.5 Atlanta 3A 24.9 26.2 9.2 11.2 15.1 17.4 Los Angeles 3B 6.9 7.7 3.3 3.9 13.4 14.1 Las Vegas 3B 15.4 17.9 11.6 14.8 12.7 16.9 San Francisco 3C 22.4 22.5 0.7 1.0 10.6 12.1 Baltimore 4A 43.0 46.9 6.2 7.9 13.3 16.2 Albuquerque 4B 30.2 33.8 5.3 6.8 13.7 16.5 Seattle 4C 38.4 42.0 0.9 1.3 11.1 13.7 Chicago 5A 59.5 62.9 4.4 5.3 15.3 18.7 Boulder 5B 43.3 47.2 3.2 4.2 15.2 18.7 Minneapolis 6A 75.5 82.2 3.7 4.3 19.5 21.1 Helena 6B 60.3 66.1 1.9 2.3 20.8 22.2 Duluth 7 92.8 103.7 1.2 1.4 21.1 21.9 Fairbanks 8 156.4 173.4 0.5 0.5 27.1 30.0 Note(s): Source(s): Heating Cooling Ventilation Climate Zone Commercial building energy benchmarks are based off of the current stock of commercial buildings and reflect 2004 ASHRAE 90.1 Climate

343

Cost-effective Lighting Retrofits: Lessons Learned  

E-Print Network (OSTI)

Facility managers and energy engineers contemplating a lighting retrofit are confronted with a confusing array of product and system options. This paper presents my experience in trial and final installations. Also presented is a commonsense approach to calculating savings.

Fisher, M. D.

1994-01-01T23:59:59.000Z

344

Florida house aglow with lighting retrofit  

SciTech Connect

In a residential lighting retrofit, how much energy can be saved with current technology? The Florida Solar Energy Center decided to find out by retrofitting every lamp in a Miami home. Most lighting studies focus on average lighting energy use or on how much energy can be saved by retrofitting large numbers of homes. However, the Florida Solar Energy Center (FSEC) was interested in finding out how much lighting energy we could save in a single house. One house with high utility bills and extensive interior lighting was picked, throughly monitored, and retrofitted every light possible. The study also helped determine what sort of monitoring is most useful, and how residents respond to efficient lighting. 1 fig., 2 tabs.

Parker, D.; Schrum, L.

1997-01-01T23:59:59.000Z

345

NETL: Carbon Absorber Retrofit Equipment (CARE)  

NLE Websites -- All DOE Office Websites (Extended Search)

Emissions Control Carbon Absorber Retrofit Equipment (CARE) Project No.: DE-FE0007528 Spray Jet Array for Neustream-C Nozzle Technology Spray Jet Array for Neustream-C Nozzle...

346

Post-Retrofit Residential Assessments  

SciTech Connect

This study examined a range of factors influencing energy consumption in households that had participated in residential energy-efficiency upgrades. The study was funded by a grant from the U.S. Department of Energy’s Pacific Northwest National Laboratory and was conducted by faculty and staff of Portland State University Center for Urban Studies and Department of Economics. This work was made possible through the assistance and support of the Energy Trust of Oregon (ETO), whose residential energy-efficiency programs provided the population from which the sample cases were drawn. All households in the study had participated in the ETO Home Performance with Energy Star (HPwES) program. A number of these had concurrently pursued measures through other ETO programs. Post-retrofit energy outcomes are rarely investigated on a house-by-house basis. Rather, aggregate changes are ordinarily the focus of program impact evaluations, with deviation from aggregate expectations chalked up to measurement error, the vagaries of weather and idiosyncrasies of occupants. However, understanding how homes perform post-retrofit on an individual basis can give important insights to increase energy savings at the participant and the programmatic level. Taking a more disaggregated approach, this study analyzed energy consumption data from before and after the retrofit activity and made comparisons with engineering estimates for the upgrades, to identify households that performed differently from what may have been expected based on the estimates. A statistical analysis using hierarchal linear models, which accounted for weather variations, was performed looking separately at gas and electrical use during the periods before and after upgrades took place. A more straightforward comparison of billing data for 12-month periods before and after the intervention was also performed, yielding the majority of the cases examined. The later approach allowed total energy use and costs to be assessed but did not account for weather variation. From this statistical analysis, 18 study participants were selected and interviewed. The participants completed an in-home interview covering a range of topics, including changes in occupancy and additional changes to the homes that may have affected energy use. The goal of the interviews was to identify factors that may have contributed to unusual energy performance. These factors were identified by their frequency of occurrence in outperforming or underperforming homes, or simply by identifying factors that had the largest impact on overall savings. The motivations and levels of satisfaction with the outcomes of the upgrades were covered in detail, as well as extensive discussions of behaviors pertaining to thermal control, lighting, water, and appliance use. Most of cases studied achieved substantial energy savings, although it was more common for the projected savings to be greater than the demonstrated savings. Two factors that played a very large role in savings variation were 1) changes in occupancy and 2) fenestration improvements outside of the incentive programs. Motivation for pursuing the upgrades (e.g., environmental sustainability vs. comfort or cost savings) did not seem to play any role in achieving savings. Participants generally were more concerned with maintaining aesthetics through lighting than comfort through heating or cooling. They also seemed more likely to turn the lights off when leaving a room than to turn the heat off when leaving the home.

Lancaster, Ross; lutzenhiser, Loren; Moezzi, Mithra; Widder, Sarah H.; Chandra, Subrato; Baechler, Michael C.

2012-04-30T23:59:59.000Z

347

Main Generator Excitation System Upgrade/Retrofit  

Science Conference Proceedings (OSTI)

Upgrading or replacing even a portion of the excitation system of a generator can provide increased reliability and availability while simultaneously decreasing operational and maintenance costs. However, the upgrade or retrofit of an excitation system is a major cost involving some degree of implementation, installation, or performance risk. This report provides lessons learned, experiences, practices and solutions from plants that have installed excitation system retrofits and upgrades. This informatio...

2005-11-07T23:59:59.000Z

348

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book (EERE)

1 1 Yearly Average Historic Mortgage Rates 30-Year Fixed 15-Year Fixed 1-Year ARM (1) 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Note(s): Source(s): 1) To calculate adjustable-rate mortgage (ARM) rates, Freddie Mac indexes the products to US Treasury yields and asks lenders for both the initial coupon rate as well as the margin on the ARM products. US Department of Housing and Urban Development, US Housing Market Conditions: 3rd Quarter 2011, November 2011, Exhibit 14. Mortgage Interest Rates, Average Commitment Rates, and Points: 1973-Present. 5.04 4.57 4.70 4.69 4.10 3.78 6.34 6.03 5.56 6.03 5.62 5.17 5.87 5.42 4.49 6.41 6.07 5.54 5.83 5.17 3.76 5.84 5.21 3.90 6.97 6.50

349

Retrofit Audits and Cost Estimates: A Look at Quality and Consistency  

Science Conference Proceedings (OSTI)

Retrofit NYC Block by Block is an outreach program targeting owners of one- to four-family homes, the most common building type in New York City, with more than 600,000 structures citywide. Administered by the Pratt Center for Community Development and implemented by four nonprofit, community based organizations, Block by Block connects residents, businesses, and religious and civic organizations in predominantly low- and moderate-income neighborhoods with one or more of a half-dozen public and private financial incentive programs that facilitate energy-efficiency retrofits. This research project sought to evaluate the approach, effectiveness, and the energy use reductions accomplished by the Retrofit NYC: Block by Block program.

Eisenberg, L.; Shapiro, C.; Fleischer, W.

2012-10-01T23:59:59.000Z

350

NASA Ames Saves Energy and Reduces Project Costs with Non-Invasive Retrofit Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NASA Ames Saves Energy and Reduces Project Costs NASA Ames Saves Energy and Reduces Project Costs with Non-Invasive Retrofit Technologies The Wireless Pneumatic Thermostat Enables Energy Efficiency Strategies, Ongoing Commissioning and Improved Operational Control Harry Sim CEO Cypress Envirosystems harry.sim@cypressenvirosystems.com www.cypressenvirosystems.com NASA Ames Reduced Project Cost by Over 80% with Non-Invasive Retrofit Technologies * Legacy Pneumatic Thermostats  Waste energy  High maintenance costs  Uncomfortable occupants  No visibility * Project Scope  14 buildings  1,370 pneumatic thermostats  Integration with campus BAS  Diagnostics for ongoing commissioning * Traditional DDC Retrofit  Cost over $4.1 million  Asbestos exposure/abatement  Occupants significantly disrupted

351

Selecting effective fluorescent lamp and ballast for retrofit in the continental United States. Final report  

SciTech Connect

Electrical lighting is a major contributor to daytime peak energy demand, accounting for about 30 percent of total electricity consumption in most Army facilities. Some of this energy may be wasted because many existing lighting systems at Army Installations use outmoded technologies. While recent technology has improved the energy efficiency of all lighting systems, fluorescent lighting-the most widely used interior building lighting-has shown the greatest efficiency gains. Retrofits using high-efficiency fluorescent lamps and ballasts can yield significant operating cost savings. High-efficiency fluorescent lighting systems are widely available, but current information on their performance characteristics is highly technical and not easily accessible to Army facility managers considering retrofit options. This report provides a single, accessible source that summarizes fluorescent lamp and ballast performance characteristics and outlines selection procedures. Fluorescent lamp, Retrofit, Ballast, Lighting. Energy conservation.

Taylor, W.R.

1993-08-01T23:59:59.000Z

352

Building Energy Software Tools Directory: Tools by Subject - Whole Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Sustainability A B E G K L S U Tool Applications Free Recently Updated Athena Model life cycle assessment, environment, building materials, buildings Free software. BEES environmental performance, green buildings, life cycle assessment, life cycle costing, sustainable development Free software. Software has been updated. Building Greenhouse Rating operational energy, greenhouse performance, national benchmark Free software. Building Performance Compass Commercial Buildings, Multi-family Residence, Benchmarking, Energy Tracking, Improvement Tracking, Weather Normalization BuildingAdvice Whole building analysis, energy simulation, renewable energy, retrofit analysis, sustainability/green buildings Software has been updated. ECO-BAT environmental performance, life cycle assessment, sustainable development Software has been updated.

353

Retrofit Savings for Brazos County  

E-Print Network (OSTI)

This report presents the energy and dollar savings for the period May 2000 - April 2001 for 10 of the Brazos County facilities that have been retrofit. The electricity use saved was 555,170 kWh and the demand was 1062 kW, which is equivalent to a $31,743 dollars savings, $24,650 from electricity use and $7,093 from the electric demand. These savings represent a 60.8% of the audit-estimated savings and a 93.7% of the audit-estimated savings if just the positive one were taken in account. The savings have improved somewhat from the previous report that included the billing periods for January to August 1999. The savings for the earlier period were 48.0% of the audit-estimated savings that means compared with 60.8% for the current period. In general has been an improvement in the energy saving in most of the facilities. The cases where are observed negative savings are the Minimum Security Jail, where is known that the area was increased significantly, the Arena Hall, where the modeling can be normalized due to kind of use of this facility, and the Road and bridges Shop, which looks to be operated more time in this period.

Baltazar-Cervantes, J. C.; Shao, X.; Claridge, D. E.

2001-01-01T23:59:59.000Z

354

Buildings Energy Data Book: 2.5 Residential Construction and Housing Market  

Buildings Energy Data Book (EERE)

9 9 Annual Sales of Existing Homes, by Region (thousands) North- Mid- east west South West 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Source(s): HUD, US Housing Market Conditions: 3rd Quarter 2011, Nov. 2011, Exhibit 7: Existing Home Sales 1969-Present, p. 73. 868 1,163 1,914 1,211 5,156 817 1,076 1,860 1,154 4,907 1,006 1,327 2,235 1,084 5,652 849 1,129 1,865 1,070 4,913 1,169 1,588 2,702 1,617 7,076 1,086 1,483 2,563 1,346 6,478 1,019 1,468 2,283 1,405 6,175 1,113 1,550 2,540 1,575 6,778 912 1,271 1,967 1,184 5,334 952 1,346 2,064 1,269 5,631 910 1,246 1,850 1,177 5,183 911 1,222 1,866 1,174 5,173 812 1,088 1,474 997 4,371 898 1,228 1,724 1,115 4,965 717 1,010 1,315 810 3,852 772 1,060 1,394 941 4,167 709 1,027 1,262

355

The Economics of Green Building  

E-Print Network (OSTI)

trends in green building upon the private market for commercial office space. Investments improving the energy

Eichholtz, Piet; Kok, Nils; Quigley, John M.

2010-01-01T23:59:59.000Z

356

Evaluation of DOE's Partnership in Low-Income Residential Retrofit (PILIRR) Program  

Science Conference Proceedings (OSTI)

In July 1986, the US Department of Energy (DOE) awarded competitive grants to five states to conduct pilot projects to establish partnerships and use resource leveraging to stimulate support for low-income residential energy retrofits. The projects were conducted under DOE's Partnerships in Low-Income Residential Retrofit (PILIRR) Program. These projects have been monitored and analyzed through a concurrent process evaluation conducted by the Pacific Northwest Laboratory (PNL). This study reports the findings of that evaluation. The overriding goal of the PILIRR Program was to determine whether the states could stimulate support for low-income residential energy improvements from non-federal sources. The goal for the process evaluation was to conduct an assessment of the processes used by the states and the extent to which they successfully established partnerships and leveraged resources. Five states were selected to participate in the program: Florida, Iowa, Kentucky, Oklahoma and Washington. Each state proposed a different approach to promote non-federal support for low-income residential weatherization. Three of the five states--Florida, Iowa, and Washington--established partnerships that led to retrofits during the monitoring period (October 1986--October 1988). Kentucky established its partnership during the monitoring period, but did not accomplish its retrofits until after monitoring was complete. Oklahoma completed development of its marketing program and had begun marketing efforts by the end of the monitoring period. 16 refs., 7 figs., 1 tab.

Callaway, J.W.; Lee, A.D.

1989-05-01T23:59:59.000Z

357

Expert Meeting Report: Transforming Existing Buildings through New Media--An Idea Exchange  

Energy.gov (U.S. Department of Energy (DOE))

This report describes results of a Building America expert meeting on September 13, 2011, in Las Vegas, Nevada, hosted by the Building America Retrofit Alliance (BARA). This meeting provided a forum for presentations and discussions on the use of new media to work with remodelers and retrofit projects to improve energy efficiency and deliver research results from the Building America program to remodelers.

358

Expert Meeting Report: Transforming Existing Buildings through New Media--An Idea Exchange  

SciTech Connect

This report describes results of a Building America expert meeting on September 13, 2011, in Las Vegas, Nevada, hosted by the Building America Retrofit Alliance (BARA). This meeting provided a forum for presentations and discussions on the use of new media to work with remodelers and retrofit projects to improve energy efficiency and deliver research results from the Building America program to remodelers.

Hunt, S.

2012-05-01T23:59:59.000Z

359

An R&D guide and multiyear plan for improving energy use in existing commercial buildings  

E-Print Network (OSTI)

3b. Low-cost daylighting control systems retrofit packageupgrade lighting systems, controls and daylighting. This hasSystems 3a: Detailed real building performance 3b: Daylighting

Diamond, Rick C.

2004-01-01T23:59:59.000Z

360

Management of building energy consumption and energy supply network on campus scale.  

E-Print Network (OSTI)

??Building portfolio management on campus and metropolitan scale involves decisions about energy retrofits, energy resource pooling, and investments in shared energy systems, such as district… (more)

Lee, Sang Hoon

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Alternative Fuels Data Center: School Bus Retrofit Reimbursement  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

School Bus Retrofit School Bus Retrofit Reimbursement to someone by E-mail Share Alternative Fuels Data Center: School Bus Retrofit Reimbursement on Facebook Tweet about Alternative Fuels Data Center: School Bus Retrofit Reimbursement on Twitter Bookmark Alternative Fuels Data Center: School Bus Retrofit Reimbursement on Google Bookmark Alternative Fuels Data Center: School Bus Retrofit Reimbursement on Delicious Rank Alternative Fuels Data Center: School Bus Retrofit Reimbursement on Digg Find More places to share Alternative Fuels Data Center: School Bus Retrofit Reimbursement on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type School Bus Retrofit Reimbursement The Illinois Department of Education will reimburse any qualifying school

362

Alternative Fuels Data Center: School Bus Retrofit Grant Program  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

School Bus Retrofit School Bus Retrofit Grant Program to someone by E-mail Share Alternative Fuels Data Center: School Bus Retrofit Grant Program on Facebook Tweet about Alternative Fuels Data Center: School Bus Retrofit Grant Program on Twitter Bookmark Alternative Fuels Data Center: School Bus Retrofit Grant Program on Google Bookmark Alternative Fuels Data Center: School Bus Retrofit Grant Program on Delicious Rank Alternative Fuels Data Center: School Bus Retrofit Grant Program on Digg Find More places to share Alternative Fuels Data Center: School Bus Retrofit Grant Program on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type School Bus Retrofit Grant Program The Ohio Environmental Protection Agency (EPA) administers the Clean Diesel

363

Alternative Fuels Data Center: School Bus Retrofit Program  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Retrofit Retrofit Program to someone by E-mail Share Alternative Fuels Data Center: School Bus Retrofit Program on Facebook Tweet about Alternative Fuels Data Center: School Bus Retrofit Program on Twitter Bookmark Alternative Fuels Data Center: School Bus Retrofit Program on Google Bookmark Alternative Fuels Data Center: School Bus Retrofit Program on Delicious Rank Alternative Fuels Data Center: School Bus Retrofit Program on Digg Find More places to share Alternative Fuels Data Center: School Bus Retrofit Program on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type School Bus Retrofit Program The goals of the Connecticut Clean School Bus Program are to: 1) establish grants for municipalities and local and regional school boards to reimburse

364

Bridgeview Park facility solar retrofit  

DOE Green Energy (OSTI)

The weatherization and insulation of a presently unheated frame park building and the installation of a Trombe wall on the south side of the structure for passive solar heating are planned. The major objectives of the project are to increase the exposure of local residents and visitors to passive solar technology and to demonstrate the applicability of passive solar technology to residential, commercial and recreational buildings. Some changes in the original plans are discussed. Five blueprints illustrate the planned improvements. (LEW)

Not Available

1981-01-01T23:59:59.000Z

365

Cold Climate Foundation Retrofit Energy Savings: The Simulated Energy and Experimental Hygrothermal Performance of Cold Climate Foundation Wall Insulation Retrofit Measures -- Phase I, Energy Simulation  

SciTech Connect

A split simulation whole building energy/3-dimensional earth contact model (termed the BUFETS/EnergyPlus Model or BEM) capable of modeling the full range of foundation systems found in the target retrofit housing stock has been extensively tested. These foundation systems that include abovegrade foundation walls, diabatic floors or slabs as well as lookout or walkout walls, currently cannot be modeled within BEopt.

Goldberg, L. F.; Steigauf, B.

2013-04-01T23:59:59.000Z

366

Cedarville School District Retrofit of Heating and Cooling Systems with  

Open Energy Info (EERE)

School District Retrofit of Heating and Cooling Systems with School District Retrofit of Heating and Cooling Systems with Geothermal Heat Pumps and Ground Source Water Loops Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Cedarville School District Retrofit of Heating and Cooling Systems with Geothermal Heat Pumps and Ground Source Water Loops Project Type / Topic 1 Recovery Act - Geothermal Technologies Program: Ground Source Heat Pumps Project Type / Topic 2 Topic Area 1: Technology Demonstration Projects Project Description - Improve the indoor air quality and lower the cost of cooling and heating the buildings that make up the campus of Cedarville High School, Middle School and Elementary School. - Provide jobs, and reduce requirements of funds for the capital budget of the School District, and thus give relief to taxpayers in this rural region during a period of economic recession. - The new Heat Pumps will be targeted to perform at very high efficiency with EER (energy efficiency ratios) of 22+/-. System capacity is planned at 610 tons. - Remove unusable antiquated existing equipment and systems from the campus heating and cooling system, but utilize ductwork, piping, etc. where feasible. The campus is served by antiquated air conditioning units combined with natural gas, and with very poor EER estimated at 6+/-. - Monitor for 3 years the performance of the new systems compared to benchmarks from the existing system, and provide data to the public to promote adoption of Geothermal technology. - The Geothermal installation contractor is able to provide financing for a significant portion of project funding with payments that fall within the energy savings resulting from the new high efficiency heating and cooling systems.

367

Energy Efficiency Building Code for Commercial Buildings in Sri Lanka  

SciTech Connect

1.1.1 To encourage energy efficient design or retrofit of commercial buildings so that they may be constructed, operated, and maintained in a manner that reduces the use of energy without constraining the building function, the comfort, health, or the productivity of the occupants and with appropriate regard for economic considerations. 1.1.2 To provide criterion and minimum standards for energy efficiency in the design or retrofit of commercial buildings and provide methods for determining compliance with them. 1.1.3 To encourage energy efficient designs that exceed these criterion and minimum standards.

Busch, John; Greenberg, Steve; Rubinstein, Francis; Denver, Andrea; Rawner, Esther; Franconi, Ellen; Huang, Joe; Neils, Danielle

2000-09-30T23:59:59.000Z

368

Cold climate foundation insulation retrofit performance  

SciTech Connect

The effectiveness of foundation insulation retrofits in 15 Minnesota houses was evaluated using a before-after experimental method. Nine houses received interior retrofits; six, exterior retrofits. Foundation air leaks were sealed before the preretrofit heating season to control for inadvertent sealing during retrofit. Basement heating supply and return registers were closed in most houses for the 21-month monitoring period, and for all houses the basement was an uncontrolled zone without a thermostat. Homeowners recorded gas and electricity meter readings and furnace and water heater on-times weekly. A load vs. outdoor temperature was used to evaluate changes in energy use. The average whole-house energy savings for the interior and exterior cases were 92 and 24 therm per year, or 7.9% (range - 0.6% to 17.8%) and 3.0% (range -2.9% to 8.3%), respectively. Minimum payback periods for the interior and exterior cases were 12 and 37 years, respectively. For all houses the basement temperature increased between the pre- and post-retrofit periods, and all homeowners reported increased comfort in their basements. Average measured savings were about one-third of those predicted. The results show that the application of insulation in an uncontrolled zone produces highly variable results and has the principal effect of increasing the temperature and comfort of the basement rather than producing cost-effective whole-house energy savings.

Robinson, D.A. (Robinson Technical Services, St. Paul, MN (US)); Goldberg, L.F.; Shen, L.S. (Univ. of Minnesota, Minneapolis, MN (US)); Nelson, G.D. (Energy Conservatory, Minneapolis, MN (US)); Hewett, M.J. (Center for Energy and the Urban Environment, Minneapolis, MN (US)); Noble, M.T. (Natural Resources Corp., Minneapolis, MN (US))

1990-01-01T23:59:59.000Z

369

Advanced Rooftop Control (ARC) Retrofit: Field-Test Results  

Science Conference Proceedings (OSTI)

The multi-year research study was initiated to find solutions to improve packaged equipment operating efficiency in the field. Pacific Northwest National Laboratory (PNNL), with funding from the U.S. Department of Energy’s (DOE’s) Building Technologies Office (BTO) and Bonneville Power Administration (BPA) conducted this research, development and demonstration (RD&D) study. Packaged equipment with constant speed supply fans is designed to provide ventilation at the design rate at all times when the fan is operating as required by building code. Although there are a number of hours during the day when a building may not be fully occupied or the need for ventilation is lower than designed, the ventilation rate cannot be adjusted easily with a constant speed fan. Therefore, modulating the supply fan in conjunction with demand controlled ventilation (DCV) will not only reduce the coil energy but also reduce the fan energy. The objective of this multi-year research, development and demonstration project was to determine the magnitude of energy savings achievable by retrofitting existing packaged rooftop air conditioners with advanced control strategies not ordinarily used for packaged units. First, through detailed simulation analysis, it was shown that significant energy (between 24% and 35%) and cost savings (38%) from fan, cooling and heating energy consumption could be realized when packaged air conditioning units with gas furnaces are retrofitted with advanced control packages (combining multi-speed fan control, integrated economizer controls and DCV). The simulation analysis also showed significant savings for heat pumps (between 20% and 60%). The simulation analysis was followed by an extensive field test of a retrofittable advanced rooftop unit (RTU) controller.

Wang, Weimin; Katipamula, Srinivas; Ngo, Hung; Underhill, Ronald M.; Taasevigen, Danny J.; Lutes, Robert G.

2013-07-31T23:59:59.000Z

370

Building America Analysis Spreadsheets | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

America Analysis Spreadsheets America Analysis Spreadsheets Building America Analysis Spreadsheets The Building America Analysis Spreadsheets are companions to the House Simulation Protocols, and can assist with many of the calculations and look-up tables found in the report. The spreadsheets provide the set of standard operating conditions-including hourly and monthly profiles for occupancy, lighting, appliances, and miscellaneous electric loads (MELs)-developed by Building America to objectively compare energy use before and after a retrofit, and against a Benchmark new construction building. Building America analysts may also find the spreadsheets useful for documenting and comparing building characteristics for the Building America projects (pre-retrofit vs. post-retrofit, or new construction test

371

High-Performance Buildings – Value, Messaging, Financial and Policy Mechanisms  

SciTech Connect

At the request of the Pacific Northwest National Laboratory, an in-depth analysis of the rapidly evolving state of real estate investments, high-performance building technology, and interest in efficiency was conducted by HaydenTanner, LLC, for the U.S. Department of Energy (DOE) Building Technologies Program. The analysis objectives were • to evaluate the link between high-performance buildings and their market value • to identify core messaging to motivate owners, investors, financiers, and others in the real estate sector to appropriately value and deploy high-performance strategies and technologies across new and existing buildings • to summarize financial mechanisms that facilitate increased investment in these buildings. To meet these objectives, work consisted of a literature review of relevant writings, examination of existing and emergent financial and policy mechanisms, interviews with industry stakeholders, and an evaluation of the value implications through financial modeling. This report documents the analysis methodology and findings, conclusion and recommendations. Its intent is to support and inform the DOE Building Technologies Program on policy and program planning for the financing of high-performance new buildings and building retrofit projects.

McCabe, Molly

2011-02-22T23:59:59.000Z

372

Financing Residential Retrofits | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Financing Residential Retrofits Financing Residential Retrofits Financing Residential Retrofits June 25, 2010 - 3:32pm Addthis Rancho Cucamonga, east of Los Angeles, received a $1.6 million Energy Efficiency and Conservation Block grant from the U.S. Department of Energy last year, using money authorized by the American Recovery and Reinvestment Act. Among the city's many uses of the Recovery Act funds are two different programs intended to encourage more energy efficient homes. One, the Home Improvement Loan Program, targets low-income residents who'd like to make major repairs or improvements in their homes. The other is the Energy Efficiency Reimbursement Program, open to any city resident who purchases and installs an energy efficient appliance. "I think we wanted to have the biggest impact we could and assist the

373

Financing Residential Retrofits | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Financing Residential Retrofits Financing Residential Retrofits Financing Residential Retrofits June 25, 2010 - 3:32pm Addthis Rancho Cucamonga, east of Los Angeles, received a $1.6 million Energy Efficiency and Conservation Block grant from the U.S. Department of Energy last year, using money authorized by the American Recovery and Reinvestment Act. Among the city's many uses of the Recovery Act funds are two different programs intended to encourage more energy efficient homes. One, the Home Improvement Loan Program, targets low-income residents who'd like to make major repairs or improvements in their homes. The other is the Energy Efficiency Reimbursement Program, open to any city resident who purchases and installs an energy efficient appliance. "I think we wanted to have the biggest impact we could and assist the

374

Greenbuilt Retrofit Test House Final Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Greenbuilt Retrofit Test House Greenbuilt Retrofit Test House Final Report B. Sparn, K. Hudon, L. Earle, C. Booten, and P. C. Tabares-Velasco National Renewable Energy Laboratory G. Barker and C. E. Hancock Mountain Energy Partnership Technical Report NREL/TP-5500-54009 October 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Greenbuilt Retrofit Test House Final Report B. Sparn, K. Hudon, L. Earle, C. Booten, and P. C. Tabares-Velasco National Renewable Energy Laboratory G. Barker and C. E. Hancock

375

An Exploration of Wall Retrofit Best Practices  

SciTech Connect

A series of experiments were performed to examine wall retrofit options including replacing the cladding, adding insulation under the cladding, and multiple sealing methods that can be used when installing replacement windows in well-built or loosely-built rough openings. These experiments included thermal measurements in a hot box and air-leakage measurements. The retrofit claddings considered included wood-lap siding, vinyl siding, and vinyl siding with an integrated and formed foam insulation. Retrofit insulations included expanded and extruded polystyrene and foil-faced polyisocyanurate in various thicknesses. Air sealing methods for replacement windows included traditional caulking, exterior trim variations, loose-fill fiberglass, low-expansion foam, self-expanding foam inserts, and specialty tape. Results were applied to a model to estimate whole-house energy impacts for multiple climates.

Stovall, Therese K [ORNL; Petrie, Thomas [ORNL; Kosny, Jan [ORNL; Childs, Phillip W [ORNL; Atchley, Jerald Allen [ORNL; Hulvey, Kimberly D [ORNL

2007-01-01T23:59:59.000Z

376

Alternative Fuels Data Center: Clean Diesel Retrofit and Idle Reduction  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Clean Diesel Retrofit Clean Diesel Retrofit and Idle Reduction Grants to someone by E-mail Share Alternative Fuels Data Center: Clean Diesel Retrofit and Idle Reduction Grants on Facebook Tweet about Alternative Fuels Data Center: Clean Diesel Retrofit and Idle Reduction Grants on Twitter Bookmark Alternative Fuels Data Center: Clean Diesel Retrofit and Idle Reduction Grants on Google Bookmark Alternative Fuels Data Center: Clean Diesel Retrofit and Idle Reduction Grants on Delicious Rank Alternative Fuels Data Center: Clean Diesel Retrofit and Idle Reduction Grants on Digg Find More places to share Alternative Fuels Data Center: Clean Diesel Retrofit and Idle Reduction Grants on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

377

Building Energy Efficiency Technologies - Energy Innovation Portal  

Building Energy Efficiency Technology Marketing Summaries Here you’ll find marketing summaries of building energy efficiency technologies available for licensing ...

378

FLASTAR: Measured Savings of a Comprehensive Energy Retrofit in a Florida Elementary School  

E-Print Network (OSTI)

This paper describes the final results for the pilot demonstration of the Florida Public Building Loan Concept. This loan program was intended to provide low cost funds to eligible public entities for upgrade of building energy systems. The site was an elementary school in Central Florida which served as the pilot project to demonstrate energy savings in public buildings similar to that achieved by the Texas LOANSTAR program (Verdict et.al., 1990). Termed FLASTAR (Florida Alliance for Saving Taxes and Resources), the study entailed the comprehensive metering of a test site to demonstrate energy savings potential. Over twenty channels of weather and submetered energy data have been collected since April 12.1995. Annual billed energy consumption for the 41.000 square foot facility was approximately 775,000 kWh (60 kBtu/ft^2) or $55,200 in the base year (1994). During the summer of 1995, replacement of aging chillers resulted in 30% reduction to cooling energy use. The second retrofit was occupancy sensor controls for classroom and office lighting which were installed in December 1995. However, post retrofit data showed that metered lighting energy use actually increased after the occupancy sensors were installed. Our data, and that of other projects. suggests that the occupancy sensor retrofit may have increased lighting on-times. Previously school personnel practiced responsible manual switching. but then came to depend on automatic control after the retrofit. The final project retrofit saw an energy management system (EMS) added in the summer of 1996. The system provided direct digital control @DC) of the school chiller, air handlers and packaged direct expansion (DX) roof-top cooling systems. The EMS equipment reduced chiller energy use by a further 16% and air handling and DX system energy consumption by 30%. The project retrofits were found to reduce overall school energy use by approximately 15% or 120.000 kWh per year. The annual energy savings totaled $4,600 at current energy prices, although the retrofits did not significantly impact facility peak load.

Sherwin, J. R.; Parker, D. S.

1998-01-01T23:59:59.000Z

379

Retrofiting survivability of military vehicles  

SciTech Connect

In Iraq the terrain was such that vehicles could be distributed horizontally, which reduced the effectiveness of mines. In the mountainous terrain of Pakistan and Afghanistan vehicles are forced to use the few, passable roads, which are dirt and easily seeded with plentiful, cheap, intelligent mines. It is desirable to reduce the losses to such mines, preferably by retrofit means that do not greatly increase weight or cost or reduce maneuverability. V-bottom vehicles - A known approach to reducing vulnerability is the Buffalo, a large vehicle developed by South Africa to address mine warfare. It has large tires, high axles, and a reinforced, v-shaped bottom that deflects the blast from explosions below. It is developed and tested in combat, but is expensive and has reduced off-road mobility. The domestic MRAP has similar cost and mobility issue. The addition of v-shaped blast deflectors to vehicles such as Humvees could act much as the deflector on a Buffalo, but a Humvee is closer to the ground, so the explosive's expansion would be reduced. The deflector would also reduce a Humvee's clearance for rough terrain, and a deflector of adequate thickness to address the blast by itself could further increase cost and reduce mobility. Reactive armor is developed and has proven effective against shaped and explosive charges from side or top attack. It detects their approach, detonates, and defeats them by interfering with jet formation. If the threat was a shaped charge from below, they would be a logical choice. But the bulk of the damage to Humvees appears to be from the blast from high explosive mines for which the colliding shock from reactive armor could increase that from the explosive. Porous materials such as sand can strongly attenuate the kinetic energy and pressure of a strong shock. Figure 1 shows the kinetic energy (KE), momentum (Mu), velocity (u), and mass (M) of a spherically expanding shock as functions of radius for a material with a porosity of 0.5. Over the range from 0.5 to 4.5 cm the shock KE is attenuated by a factor of {approx}70, while its momentum is changed little. The shock and particle velocity falls by a factor of 200 while the mass increases by a factor of 730. In the limit of very porous media u {approx} 1/M, so KE {approx} 1/M, which falls by a factor of {approx}600, while momentum Mu does not change at all. Figure 2 shows the KE, Mu, u, and M for a material with a porosity of 1.05, for which the KE changes little. In the limit of media of very low porosity, u {approx} 1/{radical}M, so KE is constant while Mu {approx} {radical}M, which increases by a factor of 15. Thus, if the goal is to reduce the peak pressure from strong explosions below, very porous materials, which strongly reduce pressure but do not increase momentum, are preferred to non-porous materials, which amplify momentum but do not decrease pressure. These predictions are in qualitative accord with the results of experiments at Los Alamos in which projectiles from high velocity, large caliber cannons were stopped by one to two sandbags. The studies were performed primarily to determine the effectiveness of sand in stopping fragments of various sizes, but could be extended to study sand's effectiveness in attenuating blast pressure. It would also be useful to test the above predictions on the effectiveness of media with higher porosity. Water barriers have been discussed but not deployed in previous retrofit survivability studies for overseas embassies. They would detect the flash from the mine detonation below, trigger a thin layer of explosive above a layer of water, and drive water droplets into the approaching blast wave. The blast loses energy in evaporating the droplets and loses momentum in slowing them. Under favorable conditions that could attenuate the pressure in the blast enough to prevent the penetration or disruption of the vehicle. However, such barriers would depend on prompt and reliable detonation detection and water droplet dispersal, which have not been tested. There is a large literature on the theoretical effec

Canavan, Gregory H [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

380

An automated vision-based method for rapid 3D energy performance modeling of existing buildings using thermal and digital imagery  

Science Conference Proceedings (OSTI)

Modeling the energy performance of existing buildings enables quick identification and reporting of potential areas for building retrofit. However, current modeling practices of using energy simulation tools do not model the energy performance of buildings ... Keywords: 3D reconstruction, Building retrofit, Energy performance modeling, Structure-from-Motion, Thermography

Youngjib Ham, Mani Golparvar-Fard

2013-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

NREL Job Task Analysis: Retrofit Installer Technician (Revised)  

SciTech Connect

A summary of job task analyses for the position of retrofit installer technician when conducting weatherization work on a residence.

Kurnik, C.; Woodley, C.

2012-04-01T23:59:59.000Z

382

Industrial HVAC Air-to-Air Energy Recovery Retrofit Economics  

E-Print Network (OSTI)

Retrofitting air-to-air energy recovery equipment is relatively simply to design and easy to install. Additionally, HVAC energy recovery is almost risk free when compared to process retrofit. Life cycle cost analysis is the best way to illustrate the economic attractiveness of retrofitting HVAC industrial energy recovery equipment.

Graham, E. L.

1980-01-01T23:59:59.000Z

383

Building Technologies Office Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Roland Risser Roland Risser Director, Building Technologies Office Building Technologies Office Energy Efficiency Starts Here. 2 Building Technologies Office Integrated Approach: Improving Building Performance Research & Development Developing High Impact Technologies Standards & Codes Locking in the Savings Market Stimulation Accelerating Tech-to- Market 3 Building Technologies Office Goal: Reduce building energy use by 50% (compared to a 2010 baseline) 4 Building Technologies Office Working to Overcome Challenges Information Access * Develop building performance tools, techniques, and success stories, such as case studies * Form market partnerships and programs to share best practices * Solution Centers * Certify the workforce to ensure quality work

384

Assessment of Building Energy-Saving Policies and Programs in China During the 11th Five Year Plan  

E-Print Network (OSTI)

retrofit in northern area district heating Special fund forbuildings that have district heating system (Wu, 2009). Thein heating load is assumed for buildings using district

Zhou, Nan

2011-01-01T23:59:59.000Z

385

Assessment of Building Energy-Saving Policies and Programs in China During the 11th Five Year Plan  

E-Print Network (OSTI)

retrofit in northern area district heating Special fund forbuildings that have district heating system (Wu, 2009). Thein heating load is assumed for buildings using district

Zhou, Nan

2010-01-01T23:59:59.000Z

386

Energy Efficient Buildings Hub | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficient Buildings Hub Efficient Buildings Hub Energy Efficient Buildings Hub August 1, 2010 - 4:27pm Addthis This model of a renovated historic building -- Building 661 -- in Philadelphia will house the Energy Efficient Buildings Hub. The facility’s renovation will serve as a best practices model for commercial building design, historic adaptive re-use, and energy efficiency innovation through continuous retrofit. This model of a renovated historic building -- Building 661 -- in Philadelphia will house the Energy Efficient Buildings Hub. The facility's renovation will serve as a best practices model for commercial building design, historic adaptive re-use, and energy efficiency innovation through continuous retrofit. The Department's Energy Innovation Hubs are helping to advance promising

387

Energy Efficient Buildings Hub | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficient Buildings Hub Energy Efficient Buildings Hub Energy Efficient Buildings Hub August 1, 2010 - 4:27pm Addthis This model of a renovated historic building -- Building 661 -- in Philadelphia will house the Energy Efficient Buildings Hub. The facility’s renovation will serve as a best practices model for commercial building design, historic adaptive re-use, and energy efficiency innovation through continuous retrofit. This model of a renovated historic building -- Building 661 -- in Philadelphia will house the Energy Efficient Buildings Hub. The facility's renovation will serve as a best practices model for commercial building design, historic adaptive re-use, and energy efficiency innovation through continuous retrofit. The Department's Energy Innovation Hubs are helping to advance promising

388

A Research Program for Promising Retrofit Technologies  

E-Print Network (OSTI)

-fired power plants. A coal plant flue gas is more difficult to handle because of the pollutants it contains-fitting of Coal-Fired Power Plants for Carbon Capture Howard Herzog March 23, 2009 #12;1. Background. It is a difficult enough task on new coal-fired plants, but even a greater challenge for retro-fitting existing

389

Survey and Analysis of Weather Data for Building Energy Simulations  

Science Conference Proceedings (OSTI)

In recent years, calibrated energy modeling of residential and commercial buildings has gained importance in a retrofit-dominated market. Accurate weather data plays an important role in this calibration process and projected energy savings. It would be ideal to measure weather data at the building location to capture relevant microclimate variation but this is generally considered cost-prohibitive. There are data sources publicly available with high temporal sampling rates but at relatively poor geospatial sampling locations. To overcome this limitation, there are a growing number of service providers that claim to provide real time and historical weather data for 20-35 km2 grid across the globe. Unfortunately, there is limited documentation from 3rd-party sources attesting to the accuracy of this data. This paper compares provided weather characteristics with data collected from a weather station inaccessible to the service providers. Monthly average dry bulb temperature; relative humidity; direct, diffuse and horizontal solar radiation; and wind speed are statistically compared. Moreover, we ascertain the relative contributions of each weather variable and its impact on building loads. Annual simulations are calculated for three different building types, including a closely monitored and automated energy efficient research building. The comparison shows that the difference for an individual variable can be as high as 90%. In addition, annual building energy consumption can vary by 7% while monthly building loads can vary by 40% as a function of the provided location s weather data.

Bhandari, Mahabir S [ORNL; Shrestha, Som S [ORNL; New, Joshua Ryan [ORNL

2012-01-01T23:59:59.000Z

390

HVAC ENERGY EFFICIENCY CASE STUDY Evaporcool condenser air pre-cooler retrofit for air-cooled chillers  

E-Print Network (OSTI)

in Figure 2. The figure shows that electricity use in the post-retrofit period is significantly lower than part wear--both lead to increased costs. It also means that cooling causes building electrical demand 280 kWh/yr-ton COOLING ENERGY & C02 SAVINGS 22% WATER USAGE 0.9 gal/day-ton #12;2 | SPEED PROGRAM CASE

California at Davis, University of

391

Puget Sound Energy - Commercial Retrofit Energy Efficiency Grant Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Puget Sound Energy - Commercial Retrofit Energy Efficiency Grant Puget Sound Energy - Commercial Retrofit Energy Efficiency Grant Program Puget Sound Energy - Commercial Retrofit Energy Efficiency Grant Program < Back Eligibility Commercial Fed. Government Industrial Local Government Nonprofit State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Other Heat Pumps Appliances & Electronics Commercial Lighting Lighting Program Info State District of Columbia Program Type Utility Grant Program Rebate Amount Up to 70% of installed cost of qualifying retrofit projects or up to 50% of qualifying lighting upgrades. Provider Puget Sound Energy PSE can provide a custom retrofit grant for any energy-efficiency project

392

Building Technologies Office: Commercial Building Energy Asset Scoring Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Scoring Tool to someone by E-mail Scoring Tool to someone by E-mail Share Building Technologies Office: Commercial Building Energy Asset Scoring Tool on Facebook Tweet about Building Technologies Office: Commercial Building Energy Asset Scoring Tool on Twitter Bookmark Building Technologies Office: Commercial Building Energy Asset Scoring Tool on Google Bookmark Building Technologies Office: Commercial Building Energy Asset Scoring Tool on Delicious Rank Building Technologies Office: Commercial Building Energy Asset Scoring Tool on Digg Find More places to share Building Technologies Office: Commercial Building Energy Asset Scoring Tool on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification

393

Market survey: Lighting loggers and occupancy loggers  

SciTech Connect

Six companies in the United States market lighting loggers, a class of devices that includes runtime and time-of-use lighting loggers and occupancy loggers. Runtime loggers are the simplest and least expensive loggers, measuring how long lights remain off or on -- data useful for assessing energy savings of lighting efficiency upgrades. Time-of-use loggers, manufactured by only one company, are more sophisticated and versatile, as well as more expensive. They record when and for how long lights are turned off and on--data useful for energy savings assessments and billing impact studies for buildings with time-of-use rates. Occupancy loggers are marketed by three companies in the United States. These loggers measure how long lights remain on when no one is in the room. Such data is useful for determining potential savings from occupancy sensors. Lighting loggers are most cost-effective when information is needed on lighting usage in individual spaces. Other methods can be more economical when overall lighting usage for a building or an entire floor is all that is needed. The simplicity of the loggers makes them accessible to anyone interested in assessing lighting savings, including end users, utilities, ESCOs, and consultants. But lighting and occupancy loggers are not always the least expensive or best way to assess lighting retrofit savings, and can be misapplied if used without a clear objective and understanding of the loggers` limitations.

Gregerson, J.

1994-12-31T23:59:59.000Z

394

Alternative Fuels Data Center: Diesel Vehicle Retrofit and Improvement  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Diesel Vehicle Diesel Vehicle Retrofit and Improvement Grants to someone by E-mail Share Alternative Fuels Data Center: Diesel Vehicle Retrofit and Improvement Grants on Facebook Tweet about Alternative Fuels Data Center: Diesel Vehicle Retrofit and Improvement Grants on Twitter Bookmark Alternative Fuels Data Center: Diesel Vehicle Retrofit and Improvement Grants on Google Bookmark Alternative Fuels Data Center: Diesel Vehicle Retrofit and Improvement Grants on Delicious Rank Alternative Fuels Data Center: Diesel Vehicle Retrofit and Improvement Grants on Digg Find More places to share Alternative Fuels Data Center: Diesel Vehicle Retrofit and Improvement Grants on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

395

Bayesian Analysis of Savings from Retrofit Projects  

SciTech Connect

Estimates of savings from retrofit projects depend on statistical models, but because of the complicated analysis required to determine the uncertainty of the estimates, savings uncertainty is not often considered. Numerous simplified methods have been proposed to determine savings uncertainty, but in all but the simplest cases, these methods provide approximate results only. The objective of this paper is to show that Bayesian inference provides a consistent framework for estimating savings and savings uncertainty in retrofit projects. We review the mathematical background of Bayesian inference and Bayesian regression, and present two examples of estimating savings and savings uncertainty in retrofit projects. The first is a simple case where both baseline and post-retrofit monthly natural gas use can be modeled as a linear function of monthly heating degree days. The Efficiency Valuation Organization (EVO 2007) defines two methods of determining savings in such cases: reporting period savings, which is an estimate of the savings during the post-retrofit period; and normalized savings, which is an estimate of the savings that would be obtained during a typical year at the project site. For reporting period savings, classical statistical analysis provides exact analytic results for both savings and savings uncertainty in this case. We use Bayesian analysis to calculate reporting period savings and savings uncertainty and show that the results are identical to the analytical results. For normalized savings, the literature contains no exact expression for the uncertainty of normalized savings; we use Bayesian inference to calculate this quantity for the first time, and compare it with the result of an approximate formula that has been proposed. The second example concerns a problem where the baseline data exhibit nonlinearity and serial autocorrelation, both of which are common in real-world retrofit projects. No analytical solutions exist to determine savings or savings uncertainty in this situation, but several simplified formulas have been proposed. We model the data using a 5-parameter model with first-order autoregressive errors, and use Bayesian inference to develop distributions for the model parameters and for the reporting period savings, which allows us to determine the savings uncertainty. We find the energy savings to be about 5% lower than the result obtained by ignoring the autocorrelation. In addition, the Bayesian analysis finds the savings uncertainty to be narrower than the approximate uncertainty calculated using the simplified formula. These results show that Bayesian inference can be used to determine savings and savings uncertainty for a wide variety of real-world problems.

Im, Piljae [ORNL

2012-01-01T23:59:59.000Z

396

Advanced Energy Retrofit Guide: Practical Ways to Improve Energy Performance, K-12 Schools (Book)  

SciTech Connect

The U.S. Department of Energy developed the Advanced Energy Retrofit Guides (AERGs) to provide specific methodologies, information, and guidance to help energy managers and other stakeholders plan and execute energy efficiency improvements. Detailed technical discussion is fairly limited. Instead, we emphasize actionable information, practical methodologies, diverse case studies, and unbiased evaluations of the most promising retrofit energy efficiency measures for each building type. A series of AERGs is under development, addressing key segments of the commercial building stock. K-12 schools were selected as one of the highest priority building sectors, because schools affect the lives of most Americans. They also represent approximately 8% of the energy use and 10% of the floor area in commercial buildings nationwide. U.S. K-12 school districts spend more than $8 billion each year on energy - more than they spend on computers and textbooks combined. Most occupy older buildings that often have poor operational performance - more than 30% of schools were built before 1960. The average age of a school is about 42 years - which is nearly the expected serviceable lifespan of the building. K-12 schools offer unique opportunities for deep, cost-effective energy efficiency improvements, and this guide provides convenient and practical guidance for exploiting these opportunities in the context of public, private, and parochial schools.

Not Available

2013-12-01T23:59:59.000Z

397

Building Technologies Office: Commercial Building Energy Asset Score Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Tool Report to someone by E-mail Tool Report to someone by E-mail Share Building Technologies Office: Commercial Building Energy Asset Score Tool Report on Facebook Tweet about Building Technologies Office: Commercial Building Energy Asset Score Tool Report on Twitter Bookmark Building Technologies Office: Commercial Building Energy Asset Score Tool Report on Google Bookmark Building Technologies Office: Commercial Building Energy Asset Score Tool Report on Delicious Rank Building Technologies Office: Commercial Building Energy Asset Score Tool Report on Digg Find More places to share Building Technologies Office: Commercial Building Energy Asset Score Tool Report on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides

398

Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40, Harvard, Massachusetts (Fact Sheet), Building America Case Study: Efficient Solutions for New and Existing Homes, Building Technologies Office (BTO)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fort Devens: Cold Climate Fort Devens: Cold Climate Market-Rate Townhomes Targeting HERS Index of 40 Harvard, Massachusetts PROJECT INFORMATION Project Name: Devens Sustainable Housing Location: Harvard, MA Partners: Metric Construction www.metriccorp.com Consortium for Advanced Residential Buildings www.carb-swa.com Size: 1,300 ft 2 plus basement Price: approx. $250,000 Year Completed: 2012 Climate Zone: Cold PERFORMANCE DATA HERS Index: 39 (before renewables) Projected Annual Energy Savings: $580 Incremental Cost of Energy Efficiency Measures: $7,804 Incremental Annual Mortgage increase: $503 Achieving aggressive energy efficiency targets requires tight coordination and clear communication among owners, designers, builders, and subcontrac-

399

BetterBuildings Financing Energy Efficiency Retrofits in the...  

NLE Websites -- All DOE Office Websites (Extended Search)

Small Commercial Energy Efficiency Finance Programs Small Commercial Energy Efficiency Finance Programs Sponsored by State Governments SURVEY OF SURVEY OF SMALL COMMERCIAL ENERGY...

400

Chapter 8, Whole-Building Retrofit with Billing Analysis Evaluation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

on all of the post-period dummy variable components, annual normal or TMY heating, andor cooling degree days for participants with measure k and the mean household characteristics...

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Building Retrofitting According to the Concept ofPassive Houses.  

E-Print Network (OSTI)

?? Under the pressure of energy shortage, energy saving has become one of the most important topics. The world isseeking different ways to follow the… (more)

Wan, Meiling

2013-01-01T23:59:59.000Z

402

Building Retrofit and DSM Study in Jiangsu | Open Energy Information  

Open Energy Info (EERE)

NRDC will coordinate Chinese and foreign experts and pay for the project. Demand-Side Management (DSM) refers to utility policies or incentives for customers (residential,...

403

Actual and Estimated Energy Savings Comparison for Deep Energy Retrofits in the Pacific Northwest  

Science Conference Proceedings (OSTI)

Seven homes from the Pacific Northwest were selected to evaluate the differences between estimated and actual energy savings achieved from deep energy retrofits. The energy savings resulting from these retrofits were estimated, using energy modeling software, to save at least 30% on a whole-house basis. The modeled pre-retrofit energy use was trued against monthly utility bills. After the retrofits were completed, each of the homes was extensively monitored, with the exception of one home which was monitored pre-retrofit. This work is being conducted by Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy Building Technologies Program as part of the Building America Program. This work found many discrepancies between actual and estimated energy savings and identified the potential causes for the discrepancies. The differences between actual energy use and modeled energy use also suggest improvements to improve model accuracy. The difference between monthly whole-house actual and estimated energy savings ranged from 75% more energy saved than predicted by the model to 16% less energy saved for all the monitored homes. Similarly, the annual energy savings difference was between 36% and -14%, which was estimated based on existing monitored savings because an entire year of data is not available. Thus, on average, for all six monitored homes the actual energy use is consistently less than estimates, indicating home owners are saving more energy than estimated. The average estimated savings for the eight month monitoring period is 43%, compared to an estimated savings average of 31%. Though this average difference is only 12%, the range of inaccuracies found for specific end-uses is far greater and are the values used to directly estimate energy savings from specific retrofits. Specifically, the monthly post-retrofit energy use differences for specific end-uses (i.e., heating, cooling, hot water, appliances, etc.) ranged from 131% under-predicted to 77% over-predicted by the model with respect to monitored energy use. Many of the discrepancies were associated with occupant behavior which influences energy use, dramatically in some cases, actual versus modeled weather differences, modeling input limitations, and complex homes that are difficult to model. The discrepancy between actual and estimated energy use indicates a need for better modeling tools and assumptions. Despite the best efforts of researchers, the estimated energy savings are too inaccurate to determine reliable paybacks for retrofit projects. While the monitored data allows researchers to understand why these differences exist, it is not cost effective to monitor each home with the level of detail presented here. Therefore an appropriate balance between modeling and monitoring must be determined for more widespread application in retrofit programs and the home performance industry. Recommendations to address these deficiencies include: (1) improved tuning process for pre-retrofit energy use, which currently utilized broad-based monthly utility bills; (2) developing simple occupant-based energy models that better address the many different occupant types and their impact on energy use; (3) incorporating actual weather inputs to increase accuracy of the tuning process, which uses utility bills from specific time period; and (4) developing simple, cost-effective monitoring solutions for improved model tuning.

Blanchard, Jeremy; Widder, Sarah H.; Giever, Elisabeth L.; Baechler, Michael C.

2012-10-01T23:59:59.000Z

404

Application of Pinch Technology in Refinery Retrofits  

E-Print Network (OSTI)

This paper reviews the application of pinch technology in the identification of the most attractive retrofit prospects in typical refineries. In the first part of the paper, methodology is described to identify attractive inter-unit heat integration opportunities as well as attractive process-utility system integration (co-generation). An example of an atmospheric pipestill-alkylation unit integration evaluation is given using both composite stream and Grand composite stream methods. In the second part of the paper, the application of pinch technology in a typical intra-unit heat integration problem is given. It is explained how inefficiencies in an APS crude preheat train are identified, and a typical small retrofit project is described.

Thomas, W. R.; Siegell, J. H.; Sideropoulos, T.; Robertson, J. L.; Papoulias, S. A.

1987-09-01T23:59:59.000Z

405

Measured energy savings and economics of retrofitting existing single-family homes: An update of the BECA-B database  

SciTech Connect

The energy bill for US single-family households was over $77 billion in 1987 (excluding auto fuel purchases), accounting for approximately 20% of national energy expenditures. Large sums are spent on residential retrofits by individual homeowners, government agencies, and utilities. As of late 1987, over 21 million households indicated that they had added at least one energy-saving measure in the previous two years, while a recent Electric Power Research Institute (EPRI) study estimated that nearly 15 million residential customers have participated in some kind of demand-side management (DSM) program. Given the level of continuing investments in residential energy efficiency, accurate estimates of savings from various conservation measures are increasingly necessary, especially as new technologies become more sophisticated and incremental efficiency gains more difficult to achieve. This report provides a comparative analysis of measured data on the performance and cost-effectiveness of energy-saving measures in existing single-family homes, based on information in the Buildings Energy-Use Compilation and Analysis (BECA) data base. The initial BECA report on measured data for single-family retrofits was completed seven years ago. In updating the single-family database, we have added 135 data points, representing over 33,000 houses, to the original database of 145 retrofit projects. The report is organized in two volumes. Volume 1 provides a summary of energy savings and costs of individual retrofit measures and strategies and results from federal/state low-income and utility weatherization programs. we also discuss measurement issues, predicted versus actual savings, trends in single-family retrofit programs, and implications for the next generation'' of cost-effective single-family retrofits. Volume 2 contains a written summary of each retrofit project and complete data tables. 87 refs., 20 figs., 16 tabs.

Cohen, S.D.; Goldman, C.A.; Harris, J.P.

1991-02-01T23:59:59.000Z

406

Building Technologies Office: Building Energy Optimization Software  

NLE Websites -- All DOE Office Websites (Extended Search)

website to download. To help meet Building America's goal to develop market-ready energy solutions that improve efficiency of new and existing homes, the National Renewable...

407

Cost-Effectiveness of Home Energy Retrofits in Pre-Code Vintage Homes in the United States  

SciTech Connect

This analytical study examines the opportunities for cost-effective energy efficiency and renewable energy retrofits in residential archetypes constructed prior to 1980 (Pre-Code) in fourteen U.S. cities. These fourteen cities are representative of each of the International Energy Conservation Code (IECC) climate zones in the contiguous U.S. The analysis is conducted using an in-house version of EnergyGauge USA v.2.8.05 named CostOpt that has been programmed to perform iterative, incremental economic optimization on a large list of residential energy efficiency and renewable energy retrofit measures. The principle objectives of the study are as follows: to determine the opportunities for cost effective source energy reductions in this large cohort of existing residential building stock as a function of local climate and energy costs; and to examine how retrofit financing alternatives impact the source energy reductions that are cost effectively achievable.

Fairey, P.; Parker, D.

2012-11-01T23:59:59.000Z

408

Comparison of Home Retrofit Programs in Wisconsin  

SciTech Connect

To explore ways to reduce customer barriers and increase home retrofit completions, several different existing home retrofit models have been implemented in the state of Wisconsin. This study compared these programs' performance in terms of savings per home and program cost per home to assess the relative cost-effectiveness of each program design. However, given the many variations in these different programs, it is difficult to establish a fair comparison based on only a small number of metrics. Therefore, the overall purpose of the study is to document these programs' performance in a case study approach to look at general patterns of these metrics and other variables within the context of each program. This information can be used by energy efficiency program administrators and implementers to inform home retrofit program design. Six different program designs offered in Wisconsin for single-family energy efficiency improvements were included in the study. For each program, the research team provided information about the programs' approach and goals, characteristics, achievements and performance. The program models were then compared with performance results -- program cost and energy savings -- to help understand the overall strengths and weaknesses or challenges of each model.

Cunningham, K.; Hannigan, E.

2013-03-01T23:59:59.000Z

409

Comparison of Home Retrofit Programs in Wisconsin  

SciTech Connect

To explore ways to reduce customer barriers and increase home retrofit completions, several different existing home retrofit models have been implemented in the state of Wisconsin. This study compared these programs' performance in terms of savings per home and program cost per home to assess the relative cost-effectiveness of each program design. However, given the many variations in these different programs, it is difficult to establish a fair comparison based on only a small number of metrics. Therefore, the overall purpose of the study is to document these programs' performance in a case study approach to look at general patterns of these metrics and other variables within the context of each program. This information can be used by energy efficiency program administrators and implementers to inform home retrofit program design. Six different program designs offered in Wisconsin for single-family energy efficiency improvements were included in the study. For each program, the research team provided information about the programs' approach and goals, characteristics, achievements and performance. The program models were then compared with performance results -- program cost and energy savings -- to help understand the overall strengths and weaknesses or challenges of each model.

Cunningham, K.; Hannigan, E.

2013-03-01T23:59:59.000Z

410

Experience with 113 Retrofit Insulation Surveys  

E-Print Network (OSTI)

We have surveyed 113 plants for thirteen clients. The results of 21 recent surveys at today's average fuel price, show an average project scope generation of $151,000 while saving about 5MMBTU/hour with a 72% DCF rate of return. The size of the retrofit project generated, or scope, is of course sensitive to the fuel price. This is an important consideration because of the variability of fuel price. A study of the effect of fuel price on project scope generation and on return has been made using sophisticated computer programs designed for this purpose. These results indicate that scope generation may vary from $50,000 for $3.00 fuel up to $80,000 for $6.00 fuel. When this happens, the project return will increase from 100% up to 165% per year. The main problem that we have found with retrofit insulation surveys is the processing of detail in existing plants. The solution is the preparation or selection of the right system for approaching the problem utilizing computer programs. The time required to generate systematic approaches to insulation surveys and the generation of retrofit projects are sizable. The continued heat losses while studying the project are also significant. Thus, the heat losses suffered while deciding how to insulate can be sufficient to pay for an insulation survey.

Webber, W. O.

1985-05-01T23:59:59.000Z

411

From the flea market  

E-Print Network (OSTI)

This thesis is about marketplaces in general, and one flea · market in particular. It explores some of the physical potentials the market has for generating a building and some of the social implications of a controversy ...

Krasnow, Ariel Rebecca

1986-01-01T23:59:59.000Z

412

New and retrofit solar hot water installations in Florida, January--June 1977  

SciTech Connect

The purpose of this project was to ascertain the number of solar hot water installations in new buildings versus the number retrofitted to existing buildings in Florida during the January to June period of 1977. The methodology was to survey all installations started, in progress, or completed during that period. A by-product of the survey is a comprehensive list of manufacturers and another of distributors and installers in Florida. The survey excludes space heating and cooling and pool heating applications. However, the latter is being considered for a separate survey. Installations included are in the single-family and multi-family residential, commercial, industrial and public sectors. In the single-family residential sector, care has been taken to determine a new or retrofit breakdown, average square footage of collector per installation, average cost per square foot of collector in Florida, and subsequently, using F-CHART and system sizing programs developed at the Center, the fraction of load supplied by solar and its equivalent barrels of oil saved per year. In the multi-family residential, commercial, industrial and public sectors, specific information on each installation has been provided. This information includes new or retrofit, ownership, type of collector and manufacturer, square footage of installation, design percentage energy by solar, suxiliary fuel, system cost, and federal grants, if any.

1978-04-01T23:59:59.000Z

413

Expert Meeting Report: Interior Insulation Retrofit of Mass Masonry Wall Assemblies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Interior Insulation Retrofit Interior Insulation Retrofit of Mass Masonry Wall Assemblies K. Ueno and R. Van Straaten Building Science Corporation (BSC) February 2012 ii NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring

414

Toward a National Plan for the Accelerated Commercialization of Solar Energy: residential/commercial buildings market sector workbook  

Science Conference Proceedings (OSTI)

This workbook contains preliminary data and assumptions used during the preparation of inputs to a National Plan for the Accelerated Commercialization of Solar Energy (NPAC). The workbook indicates the market potential, competitive position, market penetration, and technological characteristics of solar technologies for this market sector over the next twenty years. The workbook also presents projections of the mix of solar technologies by US Census Regions. In some cases, data have been aggregated to the national level. Emphasis of the workbook is on a mid-price fuel scenario, Option II, that meets about a 20% solar goal by the year 2000. The energy demand for the mid-price scenario is projected at 115 quads in the year 2000. The workbook, prepared in April 1979, represents government policies and programs anticipated at that time.

Taul, Jr., J. W.; de Jong, D. L.

1980-01-01T23:59:59.000Z

415

Design and thermal modeling of a residential building  

E-Print Network (OSTI)

Recent trends of green energy upgrade in commercial buildings show promise for application to residential houses as well, where there are potential energy-saving benefits of retrofitting the residential heating system from ...

Yeh, Alice Su-Chin

2009-01-01T23:59:59.000Z

416

Seismic fragility and retrofitting for a reinforced concrete flat-slab structure  

E-Print Network (OSTI)

The effectiveness of seismic retrofitting applied to enhance seismic performance was assessed for a five-story reinforced concrete (RC) flat-slab building structure in the central United States. In addition to this, an assessment of seismic fragility that relates the probability of exceeding a performance level to the earthquake intensity was conducted. The response of the structure was predicted using nonlinear static and dynamic analyses with synthetic ground motion records for the central U.S. region. In addition, two analytical approaches for nonlinear response analysis were compared. FEMA 356 (ASCE 2000) criteria were used to evaluate the seismic performance of the case study building. Two approaches of FEMA 356 were used for seismic evaluation: global-level and member-level using three performance levels (Immediate Occupancy, Life Safety and Collapse Prevention). In addition to these limit states, punching shear drift limits were also considered to establish an upper bound drift capacity limit for collapse prevention. Based on the seismic evaluation results, three possible retrofit techniques were applied to improve the seismic performance of the structure, including addition of shear walls, addition of RC column jackets, and confinement of the column plastic hinge zones using externally bonded steel plates. Finally, fragility relationships were developed for the existing and retrofitted structure using several performance levels. Fragility curves for the retrofitted structure were compared with those for the unretrofitted structure. For various performance levels to assess the fragility curves, FEMA global drift limits were compared with the drift limits based on the FEMA member-level criteria. In addition to this, performance levels which were based on additional quantitative limits were also considered and compared with FEMA drift limits.

Bai, Jong-Wha

2006-05-01T23:59:59.000Z

417

Effective method for MHD retrofit of power plants  

DOE Green Energy (OSTI)

Retrofitting existing power plants with an open-cycle MHD system has been re-examined in light of recent developments in the heat and seed recovery technology area. A new retrofit cycle configuration has been developed which provides for a direct gas-gas coupling; also, the MHD topping cycle can be decoupled from the existing plant for either separate or joint operation. As an example, the MHD retrofit concept has been applied to Illinois Power Company's Vermilion Station No. 1, a coal-fired power plant presently in operation. Substantial increases in efficiency have been demonstrated and the economic validity of the MHD retrofit approach has been established.

Berry, G.F.; Dennis, C.B.; Johnson, T.R.; Minkov, V.

1981-10-01T23:59:59.000Z

418

Cedarville School District Retrofit of Heating and Cooling Systems...  

Open Energy Info (EERE)

School District Retrofit of Heating and Cooling Systems with Geothermal Heat Pumps and Ground Source Water Loops Geothermal Project Jump to: navigation, search Last modified on...

419

CPS Energy - Small Business Lighting Retrofit Program (Texas...  

Open Energy Info (EERE)

Share this page on Facebook icon Twitter icon CPS Energy - Small Business Lighting Retrofit Program (Texas) This is the approved revision of this page, as well as being...

420

SEF of Central Eastern Pennsylvania Small Business Lighting Retrofit...  

Open Energy Info (EERE)

Facebook icon Twitter icon SEF of Central Eastern Pennsylvania Small Business Lighting Retrofit (PPL Territory) (Pennsylvania) This is the approved revision of this page,...

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Columbia River PUD - Commercial Lighting Retrofit Program (Oregon...  

Open Energy Info (EERE)

Share this page on Facebook icon Twitter icon Columbia River PUD - Commercial Lighting Retrofit Program (Oregon) This is the approved revision of this page, as well as...

422

Residential photovoltaic worth : an assessment of retrofit vs. new construction  

E-Print Network (OSTI)

This paper characterizes the basic differences between photovoltaic retrofit and new construction applications. It quantifies the tradeoffs forced by rooftop area constraints, special array mounting costs, maintenance ...

Dinwoodie, Thomas L.

1982-01-01T23:59:59.000Z

423

Deep Energy Retrofits-Eleven California Case Studies Brennan...  

NLE Websites -- All DOE Office Websites (Extended Search)

Deep Energy Retrofits-Eleven California Case Studies Brennan Less, Jeremy Fisher and Iain Walker Environmental Energy Technologies Division October 2012 LBNL-6166E Disclaimer This...

424

NETL: CCPI - TOXECON Retrofit for Mercury and Multi-Pollutant...  

NLE Websites -- All DOE Office Websites (Extended Search)

2004) Environmental Reports TOXECON Retrofit for Mercury and Multi-Pollutant Control, Environmental Assessment PDF-847KB (Sept 2003) PAPERS AND PRESENTATIONS Concrete...

425

Microsoft Word - CCS_PC_retrofit_r10.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

OF THE COSTS OF RETROFITTING WITH CO 2 CAPTURE TECHNOLOGY DOENETL-402102309 January 4, 2011 NETL Contact: Christopher Nichols Office of Strategic Energy Analysis and Planning...

426

Building a market for small wind: The break-even turnkey cost of residential wind systems in the United States  

SciTech Connect

Although small wind turbine technology and economics have improved in recent years, the small wind market in the United States continues to be driven in large part by state incentives, such as cash rebates, favorable loan programs, and tax credits. This paper examines the state-by-state economic attractiveness of small residential wind systems. Economic attractiveness is evaluated primarily using the break-even turnkey cost (BTC) of a residential wind system as the figure of merit. The BTC is defined here as the aggregate installed cost of a small wind system that could be supported such that the system owner would break even (and receive a specified return on investment) over the life of the turbine, taking into account current available incentives, the wind resource, and the retail electricity rate offset by on-site generation. Based on the analysis presented in this paper, we conclude that: (1) the economics of residential, grid-connected small wind systems is highly variable by state and wind resource class, (2) significant cost reductions will be necessary to stimulate widespread market acceptance absent significant changes in the level of policy support, and (3) a number of policies could help stimulate the market, but state cash incentives currently have the most significant impact, and will be a critical element of continued growth in this market.

Edwards, Jennifer L.; Wiser, Ryan; Bolinger, Mark; Forsyth, Trudy

2004-03-01T23:59:59.000Z

427

Building Technologies Office: Performance Metrics Tiers  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance Metrics Performance Metrics Tiers to someone by E-mail Share Building Technologies Office: Performance Metrics Tiers on Facebook Tweet about Building Technologies Office: Performance Metrics Tiers on Twitter Bookmark Building Technologies Office: Performance Metrics Tiers on Google Bookmark Building Technologies Office: Performance Metrics Tiers on Delicious Rank Building Technologies Office: Performance Metrics Tiers on Digg Find More places to share Building Technologies Office: Performance Metrics Tiers on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score Energy Modeling Software

428

Buildings Sector Analysis  

DOE Green Energy (OSTI)

A joint NREL, ORNL, and PNNL team conducted market analysis to help inform DOE/EERE's Weatherization and Intergovernmental Program planning and management decisions. This chapter presents the results of the market analysis for the Buildings sector.

Hostick, Donna J.; Nicholls, Andrew K.; McDonald, Sean C.; Hollomon, Jonathan B.

2005-08-01T23:59:59.000Z

429

Buildings Sector Analysis  

SciTech Connect

A joint NREL, ORNL, and PNNL team conducted market analysis to help inform DOE/EERE's Weatherization and Intergovernmental Program planning and management decisions. This chapter presents the results of the market analysis for the Buildings sector.

Hostick, Donna J.; Nicholls, Andrew K.; McDonald, Sean C.; Hollomon, Jonathan B.

2005-08-01T23:59:59.000Z

430

RETROFIT RAMP-UP SELECTED PROJECTS* Austin, Texas ($10 Million): The Austin Climate Protection Retrofit Program will accelerate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RETROFIT RAMP-UP SELECTED PROJECTS* RETROFIT RAMP-UP SELECTED PROJECTS* Austin, Texas ($10 Million): The Austin Climate Protection Retrofit Program will accelerate energy and water efficiency and integrated renewable energy improvements in private and commercial properties in the City of Austin and Austin Energy's service territory. The project will focus on alternative financing options for property owners, including new financing mechanisms, interest rate buy downs, and on-bill repayment. Boulder County, Colorado ($25 Million): Boulder County is partnering with the city of Denver, Garfield County, the Governor's Energy Office, Xcel Energy and others to launch the Colorado Retrofit Ramp-Up Program that will stimulate economic growth and investment in

431

Retrofits for Improved Heat Rate and Availability: Circulating Water Heat Recovery Retrofits  

Science Conference Proceedings (OSTI)

Circulating water heat recovery is a means of directly increasing the thermal efficiency of a power plant. If only fuel savings are considered, the economic benefit is often only marginal. However, when increased megawatt output and heat-rate improvements are included in the economic analysis, such retrofits can be attractive, with break-even fuel costs sometimes approaching $1/million Btu.

1990-11-20T23:59:59.000Z

432

Measure Guideline: Hybrid Foundation Insulation Retrofits  

Science Conference Proceedings (OSTI)

This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a 'partial drainage' detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

Ueno, K.; Lstiburek, J.

2012-05-01T23:59:59.000Z

433

Building America Efficient Solutions for Existing Homes: Case Study: Build San Antonio Green, San Antonio, Texas  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

provided technical assistance to Build provided technical assistance to Build San Antonio Green (BSAG, www.buildsagreen.org) for three of their deep energy and green retrofits. BSAG is a well established non-profit organization in the community that has certified more than 710 new homes as well as 15 retrofits through its Green Retrofit Program to date. Technical assistance provided by the Pacific Northwest National Laboratory (PNNL) team included retrofitting strategy assessments, performance testing, quality assurance, and metering. The PNNL team included Calcs-Plus, which led the field work, and the Florida Solar Energy Center, which led the metering effort. This San Antonio home is one of three deep energy renovations of occupied affordable homes certified in 2011. The homes were selected through the City of San Antonio's Owner-Occupied Housing

434

Massachusetts' Green Buildings Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Berkeley Pagination 8 Date Published 092002 Abstract Green buildings can provide a niche market for renewable energy technologies. Specifically, renewable energy technologies may...

435

Extremely Low-Energy Design for Army Buildings: Tactical Equipment Maintenance Facility; Preprint  

Science Conference Proceedings (OSTI)

This paper describes the integrated energy optimization process for buildings and building clusters and demonstrates this process for new construction projects and building retrofits. An explanation is given of how mission critical building loads affect possible site and source energy use reduction in Army buildings.

Langner, R.; Deru, M.; Zhivov, A.; Liesen, R.; Herron, D.

2012-03-01T23:59:59.000Z

436

Home Energy Article: A Systems Approach to Retrofitting Residential HVAC Systems  

E-Print Network (OSTI)

to Retrofitting a Residential HVAC System, Lawrence Berkeleyducts. New downsized ducts and HVAC equipment. The ducts areto Retrofitting Residential HVAC Systems J.A. McWilliams and

McWilliams, Jennifer A.; Walker, Iain S.

2005-01-01T23:59:59.000Z

437

Retrofitting analysis of integrated bio-refineries  

E-Print Network (OSTI)

A bio-refinery is a processing facility that produces liquid transportation fuels and/or value-added chemicals and other products. Because of the dwindling resources and escalating prices of fossil fuels, there are emerging situations in which the economic performance of fossil-based facilities can be enhanced by retrofitting and incorporation of bio-mass feedstocks. These systems can be regarded as bio-refineries or integrated fossilbio- refineries. This work presents a retrofitting analysis to integrated bio-refineries. Focus is given to the problem of process modification to an existing plant by considering capacity expansion and material substitution with biomass feedstocks. Process integration studies were conducted to determine cost-effective strategies for enhancing production and for incorporating biomass into the process. Energy and mass integration approaches were used to induce synergism and to reduce cost by exchanging heat, material utilities, and by sharing equipment. Cost-benefit analysis was used to guide the decision-making process and to compare various production routes. Ethanol production from two routes was used as a case study to illustrate the applicability of the proposed approach and the results were bio-refinery has become more attractive then fossil-refinery.

Cormier, Benjamin R.

2005-12-01T23:59:59.000Z

438

NYSEG (Electric) - Small Business Lighting Retrofit Program | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NYSEG (Electric) - Small Business Lighting Retrofit Program NYSEG (Electric) - Small Business Lighting Retrofit Program NYSEG (Electric) - Small Business Lighting Retrofit Program < Back Eligibility Commercial Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info Funding Source System Benefits Charge State New York Program Type Utility Rebate Program Rebate Amount Energy Assessment: Free Lighting Retrofit: 70% of cost Provider RG&E and NYSEG NYSEG offers a lighting incentive program designed to serve small business customers with a demand of 100 kilowatts (kW) or less. These small business customers may schedule a free energy assessment and then receive a 70% discount on the installed cost of recommended lighting measures. Eligible lighting measures include the retrofitting of fluorescent fixtures,

439

Tillamook County PUD - Dairy Lighting Retrofit Rebate Program | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tillamook County PUD - Dairy Lighting Retrofit Rebate Program Tillamook County PUD - Dairy Lighting Retrofit Rebate Program Tillamook County PUD - Dairy Lighting Retrofit Rebate Program < Back Eligibility Agricultural Savings Category Appliances & Electronics Commercial Lighting Lighting Program Info State Oregon Program Type Utility Rebate Program Provider Tillamook County PUD Tillamook PUD offers the Dairy Lighting Retrofit Program for its agricultural members to save energy on lighting in eligible barns/facilities. Tillamook PUD completes a lighting audit of the facility to calculate the energy savings and rebate amount. Incentives are provided for the replacement of existing mercury vapor, incandescent, and T12 fluorescent fixtures with new ORION AG9000 3-lamp T8 fluorescent fixtures. This rebate is available for retrofits only, new construction is not

440

Retrofit Ramp-Up Selected Projects* | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofit Ramp-Up Selected Projects* Retrofit Ramp-Up Selected Projects* Retrofit Ramp-Up Selected Projects* Brief descriptions of retrofit ramp projects throughout the nation including: Austin, Texas; Boulder County, Colorado;Camden, New Jersey;Chicago;Cincinnati,Ohio;Greensboro, North Carolina;Indianapolis, Indiana;Kansas City, Missouri;Los Angeles County, California;Lowell, Massachusetts;State of Maine;State of Maryland;State of Michigan;State of Missouri;Omaha, Nebraska;State of New Hampshire;New York State Research and Development Authority;Philadelphia, Pennsylvania;Phoenix, Arizona;Portland, Oregon;San Antonio, Texas;Seattle, Washington;Southeast Energy Efficiency Alliance;Toledo-Lucas County Port Authority, Ohio;Wisconsin Energy Conservation Corporation Retrofit Ramp-Up Selected Projects*

Note: This page contains sample records for the topic "building retrofit markets" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

DEEP RESIDENTIAL RETROFITS - USING LESS AND LIVING BETTER  

NLE Websites -- All DOE Office Websites (Extended Search)

DEEP RESIDENTIAL RETROFITS - USING LESS AND LIVING BETTER DEEP RESIDENTIAL RETROFITS - USING LESS AND LIVING BETTER Speaker(s): Iain Walker Date: December 11, 2009 - 12:00pm Location: 90-3122 (This is a repeat of the Nov. 18 ME EET Seminar on campus) There are currently thousands of federal, state and utility programs starting up throughout he nation to retrofit existing homes. Most of these programs have moderate savings goals on the order of 20%, but to really make an impact and make the nations housing stock sustainable we need savings of 70% or more. This requires fundamental changes in the way we think about retrofits. We need better diagnostics to determine how houses perform - both before and after retrofitting, we need better ways of simulating home performance so we can make better decisions about what to do to a home to

442

PROGRESS IN ENERGY EFFICIENT BUILDINGS  

SciTech Connect

Recent accomplishments in buildings energy research by the diverse groups in the Energy Efficient Buildings Program at Lawrence Berkeley Laboratory (LBL) are summarized. We review technological progress in the areas of ventilation and indoor air quality, buildings energy performance, computer modeling, windows, and artificial lighting. The need for actual consumption data to track accurately the improving energy efficiency of buildings is being addressed by the Buildings Energy Data (BED) Group at LBL. We summarize results to date from our Building Energy Use Compilation and Analysis (BECA) studies, which include time trends in the energy consumption of new commercial and new residential buildings, the measured savings being attained by both commercial and residential retrofits, and the cost-effectiveness of buildings energy conservation measures. We also examine recent comparisons of predicted vs. actual energy usage/savings, and present the case for building energy use labels.

Wall, L.W.; Rosenfeld, A.H.

1982-12-01T23:59:59.000Z

443

Retrofitting Doors on Open Refrigerated Cases  

NLE Websites -- All DOE Office Websites (Extended Search)

Retailer End Users Utilities and Efficiency Organizations Manufacturers and Equipment Suppliers Designers, Installers and Technicians 6 | Building Technologies Office...

444

A Calibration Methodology for Retrofit Projects Using Short-Term Monitoring and Disaggregated Energy Use Data  

E-Print Network (OSTI)

This paper presents an improved methodology to calibrate energy simulation models to better represent the actual energy use breakdowns in existing buildings. The goal of this methodology is to help architects and engineers accurately determine the current energy use and identify any energy-related problems in the building before proposing the retrofit design solutions, without conducting long-term monitoring. The methodology includes procedures to conduct systematic data collection, "on-off' tests to determine the power densities of the electrical loads, up to four weeks of building energy monitoring to derive the energy use profiles and temperature settings, and disaggregation of the measured energy use data. The procedures also utilize the monthly utility billing records and site weather data. The calibration to the measured data is done on both hourly and monthly basis. The procedures are built into a computer program and integrated with previously developed simulation software. The user interface of the program includes guidelines to help the user decide which simulation input variable has to be altered in order to match the measured data. It also produces graphical outputs to help in visualizing the results, and several guidelines to help study different retrofit strategies after the model has been calibrated.

Soebarto, V. I.; Degelman, L. O.

1996-01-01T23:59:59.000Z

445

Continuous Controls: Lighting Energy Management for Retrofit and New Construction Projects  

E-Print Network (OSTI)

The rising interest of specifiers and end-users in Lighting Energy Management (LEM) control equipment has led to an increased need for further education in the selection, capabilities and applications of such equipment. This paper addresses these and related points for a particular type of LEM equipment referred to as "continuous controls." More specifically, the need for such equipment and its performance are reviewed. The remainder of the paper discusses the capabilities and applications of continuous control equipment for retrofit and new construction projects. Particular attention is drawn to the need for specifiers and end-users to become more control conscious as continuous controls become more fully integrated into building design.

Schuett, R.

1985-01-01T23:59:59.000Z

446

Four firms marketing new lighting products  

SciTech Connect

New lighting products on the market include a screw-in high-pressure sodium (HPS) retrofit from Teron Lighting Corp., a screw-in industrial HPS lamp from Guth Lighting, low-voltage task and display lighting fixtures from Capri Lighting, and a current-reducing device from Remtec. The article describes the energy savings, costs, and specifications of each product. (DCK)

1983-07-04T23:59:59.000Z

447

Public Sector New Construction and Retrofit Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Public Sector New Construction and Retrofit Program Public Sector New Construction and Retrofit Program Public Sector New Construction and Retrofit Program < Back Eligibility Fed. Government Institutional Local Government Schools State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Cooling Construction Design & Remodeling Appliances & Electronics Ventilation Heat Pumps Commercial Lighting Lighting Manufacturing Insulation Water Heating Windows, Doors, & Skylights Maximum Rebate Bonus maximum: $100,000 All incentives: $2.50/sq. ft. (base plus bonus), $300,000, 75% of project costs, and 100% of incremental costs Program Info Funding Source Illinois Energy Efficiency Portfolio Standard (EEPS) surcharge for Ameren,

448

NIPSCO - Existing Facility Retrofit Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NIPSCO - Existing Facility Retrofit Rebate Program NIPSCO - Existing Facility Retrofit Rebate Program NIPSCO - Existing Facility Retrofit Rebate Program < Back Eligibility Commercial Fed. Government Industrial Institutional Local Government Nonprofit Schools State Government Tribal Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Home Weatherization Construction Commercial Weatherization Design & Remodeling Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Contact NIPSCO $500,000 per project per year $1,000,000 per applicant per year Program Info Expiration Date 12/31/2013 State Indiana Program Type Utility Rebate Program Rebate Amount Other Projects: $0.09/kWh in electricity reductions Energize Indiana Rebates: Varies widely Provider

449

MassSAVE (Electric) - Residential Retrofit Programs | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Retrofit Programs Retrofit Programs MassSAVE (Electric) - Residential Retrofit Programs < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Other Sealing Your Home Ventilation Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Maximum Rebate Weatherization: $2000 Program Info Expiration Date 12/31/2012 State Massachusetts Program Type Utility Rebate Program Rebate Amount Weatherization: 75% Heat Pump Water Heater: $1,000 Income Eligible Customers: free home energy consultation Mulitifamily Incentives: comprehensive energy analysis, lighting upgrades, insulation, air sealing and other energy saving measures.

450

Preliminary Screening for Project Feasibility and Applications for Geothermal Heat Pump Retrofit Projects  

Energy.gov (U.S. Department of Energy (DOE))

Fact sheet describes guidance on determining the feasibility of geothermal heat pump retrofit projects.