National Library of Energy BETA

Sample records for building energy standards

  1. Building Energy Standards

    Office of Energy Efficiency and Renewable Energy (EERE)

    The 2015 Vermont Commercial Building Energy Standards (CBES) took effect on March 1, 2015. The code is based on the 2015 IECC, with amendments to incorporate ASHRAE 90.1-2013. The new guidelines ...

  2. Energy Standards for State Buildings

    Broader source: Energy.gov [DOE]

    The State is still required by statute to adopt planning and construction standards for state buildings that conserve energy and optimize the energy performance of new buildings. The standards mu...

  3. State Building Energy Standards

    Broader source: Energy.gov [DOE]

    In May 2013 the Sustainable Coonstruction Advisory Committee responsible for adopting buildings codes was mandated to automatically adopt tne most recent version of the rating systems developed b...

  4. Energy Standards for Public Buildings | Open Energy Information

    Open Energy Info (EERE)

    Comprehensive MeasuresWhole Building CHPCogeneration Yes Life-Cycle Analysis and Energy Efficiency in State Buildings (Missouri) Energy Standards for Public Buildings Missouri...

  5. Energy Standards for Public Buildings

    Broader source: Energy.gov [DOE]

    Note: As of July 2015, Missouri state facilities under construction or renovation, and commercial buildings purchased or leased by state agencies, must comply with the 2015 IECC, pursuant to the...

  6. Energy-Efficient Building Standards for State Facilities

    Broader source: Energy.gov [DOE]

    Via Executive Order 27, Maine requires the construction or renovation of state buildings to incorporate "green building" standards that would achieve significant energy efficiency and environmental...

  7. Energy Efficiency Standards for State Buildings

    Broader source: Energy.gov [DOE]

    The Montana Department of Labor must also develop and adopt high performance building standards, along with the Montana university system and other state agencies. These standards must take into...

  8. Building Standards Lead-by-Example Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards Lead-by-Example Resources Building Standards Lead-by-Example Resources State and local governments can lead by example by promoting energy efficiency programs and policies for public facilities, equipment, and government operations. Find building standards lead-by-example resources below. DOE Resource National Best Practices Manual For Building High Performance Schools. Other Resource Roadmap to Green Government Buildings

  9. Standard Definitions of Building Geometry for Energy Evaluation

    SciTech Connect (OSTI)

    Deru, M.; Torcellini, P.

    2005-10-01

    This document provides definitions and metrics of building geometry for use in building energy evaluation. Building geometry is an important input in the analysis process, yet there are no agreed-upon standard definitions of these terms for use in energy analysis. The metrics can be used for characterizing building geometry, for calculating energy performance metrics, and for conducting energy simulations.

  10. EIS-0061: Energy Performance Standards for New Buildings

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Office of Conservation and Solar Energy prepared this statement to assess the environmental and socioeconomic implications of implementing the Energy Performance Standard for new buildings, as mandated by Congress in Section 305 of the Energy Conservation Standards for New Buildings Ac t of 1976.

  11. Building America Webinar: Resolving Codes and Standards Issues to Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovations | Department of Energy Resolving Codes and Standards Issues to Energy Innovations Building America Webinar: Resolving Codes and Standards Issues to Energy Innovations This webinar provided an overview of how Building America has impacted codes and standards in the past through technical and market innovations. The presenter also described new content on the Building America Solution Center that will help builders meet code requirements and will help code officials apply codes to

  12. Worldwide status of energy standards for buildings: Appendices

    SciTech Connect (OSTI)

    Janda, K.B.; Busch, J.F.

    1993-02-01

    This informal survey was designed to gain information about the worldwide status of energy efficiency standards for buildings, particularly non-residential buildings such as offices, schools, and hotels. The project has three goals: 1. To understand and learn from the experience of countries with existing building energy standards; 2. To locate areas where these lessons might be applied and energy standards might be effectively proposed and developed; and 3. To share the information gathered with all participating countries. These appendices include the survey cover letter, the survey, and the details of selected energy standards in 35 countries, thus providing supporting material for the authors` article of the same title.

  13. 1994 Building energy codes and standards workshops: Summary and documentation

    SciTech Connect (OSTI)

    Sandahl, L.J.; Shankle, D.L.

    1994-09-01

    During the spring of 1994, Pacific Northwest Laboratory (PNL), on behalf of the U.S. Department of Energy (DOE) Office of Codes and Standards, conducted five two-day Regional Building Energy Codes and Standards workshops across the United States. Workshops were held in Chicago, Philadelphia, Atlanta, Dallas, and Denver. The workshops were designed to benefit state-level officials including staff of building code commissions, energy offices, public utility commissions, and others involved with adopting/updating, implementing, and enforcing state building codes in their states. The workshops provided an opportunity for state and other officials to learn more about the Energy Policy Act of 1992 (EPAct) requirements for residential and commercial building energy codes, the Climate Change Action Plan, the role of the U.S. Department of Energy and the Building Energy Standards Program at Pacific Northwest Laboratory, the commercial and residential codes and standards, the Home Energy Rating Systems (HERS), Energy Efficient Mortgages (EEM), training issues, and other topics related to the development, adoption, implementation, and enforcement of building energy codes. In addition to receiving information on the above topics, workshop participants were also encouraged to inform DOE of their needs, particularly with regard to implementing building energy codes, enhancing current implementation efforts, and building on training efforts already in place. This paper documents the workshop findings and workshop planning and follow-up processes.

  14. A history of the Building Energy Standards Program

    SciTech Connect (OSTI)

    Shankle, D.L.; Merrick, J.A.; Gilbride, T.L.

    1994-02-01

    This report describes the history of the Pacific Northwest Laboratory`s (PNL`s) work in development of energy standards for commercial and residential construction in the United States. PNL`s standards development efforts are concentrated in the Building Energy Standards Program (the Program), which PNL conducts for the U.S. Department of Energy (DOE) Office of Codes and Standards. The Program has worked with DOE, the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), and other building codes and standards organizations to develop, evaluate, and promulgate energy standards in all sectors of the building industry. This report describes the recent history of U.S. code development and PNL`s contributions through the 1980s and early 1990s, up to the passage of the Energy Policy Act of 1992. Impacts to standards development resulting from the passage of this act will be described in other reports.

  15. Commercial building energy efficiency standards & performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Key Issues: * Lack of data in developing Chinese reference buildings Chinese partners surveyed design drawings to get building characteristics * Lack of cost database work ...

  16. Appliance Standards and Building Codes | Department of Energy

    Office of Environmental Management (EM)

    Building Codes Appliance Standards and Building Codes Appliance Standards Overview for the 2013 Building Technologies Office's Program Peer Review appstdsoverviewcymbalsky040213...

  17. Energy Efficiency Standard for State Buildings

    Broader source: Energy.gov [DOE]

    In December 2015, Governor Raimondo issued an executive order establishing a renewable energy and an energy efficiency goal for the State facilities. The order directs the RI state government: 1)...

  18. Energy Efficiency Standards for State Buildings

    Broader source: Energy.gov [DOE]

    The statute also requires all departments to purchase products certified by Energy Star or the Federal Energy Management Program (FEMP) in all categories that are available unless the products ar...

  19. Implementing energy standards for motors and buildings in the Philippines

    SciTech Connect (OSTI)

    Wiel, S.; Busch, J.; Sanchez, C.; Deringer, J.; Fernandez, E.; Companano, M.

    1998-07-01

    The Philippines' master plan for energy makes cornerstones of energy standards for appliances, buildings, and motors in their energy efficiency effort. Significant progress has been made in implementing appliance standards for some products, but has lagged for others. This has been partly because the resources allocated have dictated a cautious deliberate approach. Products where there has been a lack of information about the respective markets have received lowest priority. Motors fall in this latter category. In their development of building codes, the Philippine government has also taken a cautious deliberate approach and is just now attending to the compliance of a commercial building energy performance standard that was enacted into law in 1994. This paper describes the results of recent new buildings and motor market assessments carried out in the Philippines, a survey of building energy code implementation in other countries, and how these products are being used to further implementation of energy standards in the Philippines. Lessons for other countries are drawn from this experience.

  20. Energy Efficiency and Green Building Standards for State Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    Each of the six largest state agencies is required to submit a biannual report detailing plans for energy cost reduction in the facilities it occupies, and the DOA institutes rules promoting...

  1. ASEAN-USAID buildings energy conservation project. Volume 1, Energy standards: Final report

    SciTech Connect (OSTI)

    Levine, M.D.; Busch, J.F.; Deringer, J.J.

    1992-06-01

    Mandatory or voluntary energy-efficiency standards for new or existing buildings can play an important role in a national program aimed at promoting energy conservation. Building codes and standards can provide a degree of control over design and building practices throughout the construction process, and encourage awareness of energy-conscious design. Studies in developed countries indicate that efficiency standards can produce energy reductions on the order of 20 to 40% or more. Within ASEAN, analyses of the savings potential from the proposed standards suggest that if implemented, these standards would produce savings over current new design practice of 19% to 24%. In this volume we provide an overview of the ASEAN-USAID project aimed at promulgating standards for energy efficiency in commercial buildings. The process of developing and implementing energy-efficiency standards for buildings can be subdivided into two key components: policy development; and technical and economic analysis. Each of these involves a number of steps and processes, as outlined in Figure 1-1. This volume describes the technical and economic analyses used to develop the proposed energy efficiency standards for four countries (Malaysia, Thailand, the Philippines, and Indonesia), and to refine an energy standard existing in Singapore since 1979. Though oriented toward the ASEAN region, the analysis methods described here are applicable in a range of settings, provided appropriate modifications are made for local building construction, climatic, economic, and political conditions. Implementation issues are not specifically addressed here; rather this volume is oriented towards the analytical work needed to establish or revise an energy standard for buildings.

  2. Building Energy Codes Newsletter: Setting the Standard-February 2010

    SciTech Connect (OSTI)

    U.S. Department of Energy

    2010-02-01

    This newsletter from the U.S. Department of Energy Buildng Energy Codes Program keeps readers up to date on energy code standards; the February 2010 issue focuses on helping states with code adoption, compliance, and resources.

  3. Life Cycle Analysis and Energy Conservation Standards for State Buildings

    Broader source: Energy.gov [DOE]

    In January 2007, Ohio enacted HB 251 and Governor Ted Strickland issued Executive Order 2007-02S. Both initiatives amend state policy pertaining to energy efficiency in state buildings. H.B. 251...

  4. USDOE energy standard compliance test on two-story office building

    SciTech Connect (OSTI)

    Bailey, S.A.

    1993-11-01

    There exists some skepticism in the design community regarding the ability to design an aesthetically pleasing building that meets the interim energy conservation standard for new commercial buildings initiated by the US Department of Energy. In response to this, a study was undertaken to demonstrate that compliance with energy standards does not mean giving up the architectural intent of a building. An unusual and architecturally pleasing building design was chosen for this study. This two-story office building has a large, central atrium, made almost entirely of glass. It is the building`s focal point, lending an inviting atmosphere to the interior spaces but also poses a considerable challenge to the HVAC system to keep the building comfortable. The building was simulated and easily complied with the Standard, based on an annual energy cost comparison. Alterations to the original design affected neither the interior floor plan nor exterior elevations.

  5. Derivation of Building Energy Use Intensity Targets for ASHRAE Standard 100

    SciTech Connect (OSTI)

    Sharp, Terry R

    2014-06-01

    The steps to develop the building energy use intensity targets for American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 100, Energy Efficiency in Existing Buildings are outlined in this report. The analyses were conducted by Oak Ridge National Laboratory (ORNL) in collaboration with the ASHRAE Standard 100 committee and Dr. Alexander Zhivov, the subcommittee chair responsible for targets development.

  6. Expanded standards and codes case limits combined buildings delivered energy to 21 quadrillion Btu by 2035

    U.S. Energy Information Administration (EIA) Indexed Site

    Erin Boedecker, Session Moderator April 27, 2011 | Washington, DC Energy Demand. Efficiency, and Consumer Behavior 16 17 18 19 20 21 22 23 24 25 2005 2010 2015 2020 2025 2030 2035 2010 Technology Reference Expanded Standards Expanded Standards + Codes -7.6% ≈ 0 Expanded standards and codes case limits combined buildings delivered energy to 21 quadrillion Btu by 2035 2 Erin Boedecker, EIA Energy Conference, April 27, 2011 delivered energy quadrillion Btu Source: EIA, Annual Energy Outlook 2011

  7. Energy Savings Modeling of Standard Commercial Building Re-tuning Measures: Large Office Buildings

    SciTech Connect (OSTI)

    Fernandez, Nicholas; Katipamula, Srinivas; Wang, Weimin; Huang, Yunzhi; Liu, Guopeng

    2012-06-01

    Today, many large commercial buildings use sophisticated building automation systems (BASs) to manage a wide range of building equipment. While the capabilities of BASs have increased over time, many buildings still do not fully use the BAS's capabilities and are not properly commissioned, operated or maintained, which leads to inefficient operation, increased energy use, and reduced lifetimes of the equipment. This report investigates the energy savings potential of several common HVAC system retuning measures on a typical large office building prototype model, using the Department of Energy's building energy modeling software, EnergyPlus. The baseline prototype model uses roughly as much energy as an average large office building in existing building stock, but does not utilize any re-tuning measures. Individual re-tuning measures simulated against this baseline include automatic schedule adjustments, damper minimum flow adjustments, thermostat adjustments, as well as dynamic resets (set points that change continuously with building and/or outdoor conditions) to static pressure, supply air temperature, condenser water temperature, chilled and hot water temperature, and chilled and hot water differential pressure set points. Six combinations of these individual measures have been formulated - each designed to conform to limitations to implementation of certain individual measures that might exist in typical buildings. All of these measures and combinations were simulated in 16 cities representative of specific U.S. climate zones. The modeling results suggest that the most effective energy savings measures are those that affect the demand-side of the building (air-systems and schedules). Many of the demand-side individual measures were capable of reducing annual HVAC system energy consumption by over 20% in most cities that were modeled. Supply side measures affecting HVAC plant conditions were only modestly successful (less than 5% annual HVAC energy savings for

  8. Experience implementing energy standards for commercial buildings and its lessons for the Philippines

    SciTech Connect (OSTI)

    Busch, John; Deringer, Joseph

    1998-10-01

    Energy efficiency standards for buildings have been adopted in over forty countries. This policy mechanism is pursued by governments as a means of increasing energy efficiency in the buildings sector, which typically accounts for about a third of most nations' energy consumption and half of their electricity consumption. This study reports on experience with implementation of energy standards for commercial buildings in a number of countries and U.S. states. It is conducted from the perspective of providing useful input to the Government of the Philippines' (GOP) current effort at implementing their building energy standard. While the impetus for this work is technical assistance to the Philippines, the intent is to shed light on the broader issues attending implementation of building energy standards that would be applicable there and elsewhere. The background on the GOP building energy standard is presented, followed by the objectives for the study, the approach used to collect and analyze information about other jurisdictions' implementation experience, results, and conclusions and recommendations.

  9. EA-1872: Energy Efficiency and Sustainable Design Standards for New Federal Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    This EA evaluated the environmental impacts of a proposal to amend the current rule for commercial and high-rise multi-family residential buildings, 10 CFR 433 “Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings,” to replace ASHRAE Standard 90.1-2004 with the more stringent ASHRAE Standard 90.1-2007, incorporated by reference. This EA also evaluated the environmental impacts with regard to low-rise residential buildings; this rulemaking updated 10 CFR 435 Subpart A, “Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings,” to replace the International Energy Conservation Code (IECC) 2004 with the more stringent IECC 2009, incorporated by reference. This EA was completed as DOE/EA-1871.

  10. Energy Efficiency and Sustainable Construction Standards for Public Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    Major facility projects must include Georgia products such that not less than 10% of all building materials used in a project are harvested, extracted or manufactured in Georgia, where such...

  11. Recommendations for energy conservation standards for new residential buildings - volume 3: Introduction and Background to the Standard Development Effort

    SciTech Connect (OSTI)

    Not Available

    1989-05-01

    The Energy Conservation for New Buildings Act of 1976, as amended, 42 U.S.C Section 6831 et. seq. requires the US Department of Energy to issue energy conservation standards for the design of new residential and commercial buildings. The standards will be mandatory only for the design of new federal buildings, and will serve as voluntary guidelines for the design of new non-federal buildings. This report documents the development and testing of a set of recommendations, from the American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc. (ASHRAE) Special Projects Committee No. 53, designed to provide the technical foundation for the Congressionally-mandated energy standard for new residential buildings. The recommendations have been developed over the past 25 months by a multidisciplinary project team, under the management of the US Department of Energy and its prime contractor, Pacific Northwest Laboratory. Volume III -- Introduction and Background to the Standard Development Effort is a description of the Standard development process and contains the rationale for the general approach and specific criteria contained within the recommendations.

  12. Improved data and procedures needed for development and implementation of building energy performance standards

    SciTech Connect (OSTI)

    Staats, E.B.

    1980-12-23

    Energy conservation standards for new buildings being developed by the DOE are discussed. Specifically, it addresses: (1) what still needs to be done before sound standards can be issued, (2) the need to transfer implementation responsibility for the standards from the US HUD to the DOE, and (3) the inappropriateness of the proposed sanction for noncompliance in view of the large decrease in expected energy savings.

  13. Green Building and Energy Reduction Standards for State Agencies

    Office of Energy Efficiency and Renewable Energy (EERE)

    Executive Order 05-01 set the goal that - by September 2009 - state agencies must use all practicable and cost-effective means available, including energy efficiency and renewable energy measures,...

  14. Building MRV Standards and Capacity in Key Countries | Open Energy...

    Open Energy Info (EERE)

    Organization World Resources Institute (WRI) Sector Climate Focus Area Renewable Energy Topics Implementation Website http:www.wri.orgtopicsmrv Program Start 2011 Program...

  15. Buildings Energy Data Book: 7.7 Water Use Standards

    Buildings Energy Data Book [EERE]

    Water Use Standards March 2012 7.7.1 Water Use Standards for Faucets, Showerheads, and Prerinse Spray Valves (1) Faucet Type (2) Maximum Flow Rate Kitchen Faucets (3) 2.2 gpm Lavatory Replacement Aerators 2.2 gpm Kitchen Faucets 2.2 gpm Kitchen Replacement Aerators 2.2 gpm Metering Faucets (4) 0.25 gal/cycle Showerheads (5) 2.5 gpm Commercial Prerinse Spray Valves (6) 1.6 gpm Note(s): Source(s): 1) Effective for products manufactured on or after January 1, 1994. 2) When measured at a flowing

  16. Model Building Energy Code

    Broader source: Energy.gov [DOE]

    The Energy Efficiency Building Performance Standards (EEBPS) are statewide minimum requirements that all new construction and additions to existing buildings must satisfy. Exceptions include...

  17. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    4.1 Federal Buildings Energy Consumption 4.2 Federal Buildings and Facilities Characteristics 4.3 Federal Buildings and Facilities Expenditures 4.4 Legislation Affecting Energy Consumption of Federal Buildings and Facilities 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download

  18. Calculating impacts of energy standards on energy demand in U.S. buildings with uncertainty in an integrated assessment model

    SciTech Connect (OSTI)

    Scott, Michael J.; Daly, Don S.; Hathaway, John E.; Lansing, Carina S.; Liu, Ying; McJeon, Haewon C.; Moss, Richard H.; Patel, Pralit L.; Peterson, Marty J.; Rice, Jennie S.; Zhou, Yuyu

    2015-10-01

    In this paper, an integrated assessment model (IAM) uses a newly-developed Monte Carlo analysis capability to analyze the impacts of more aggressive U.S. residential and commercial building-energy codes and equipment standards on energy consumption and energy service costs at the state level, explicitly recognizing uncertainty in technology effectiveness and cost, socioeconomics, presence or absence of carbon prices, and climate impacts on energy demand. The paper finds that aggressive building-energy codes and equipment standards are an effective, cost-saving way to reduce energy consumption in buildings and greenhouse gas emissions in U.S. states. This conclusion is robust to significant uncertainties in population, economic activity, climate, carbon prices, and technology performance and costs.

  19. National Green Building Standard Analysis

    SciTech Connect (OSTI)

    NAHB Research Center, Upper Marlboro, Maryland

    2012-07-01

    DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

  20. EnergyPlus Analysis Capabilities for Use in California Building Energy Efficiency Standards Development and Compliance Calculations

    SciTech Connect (OSTI)

    Hong, Tianzhen; Buhl, Fred; Haves, Philip

    2008-03-28

    California has been using DOE-2 as the main building energy analysis tool in the development of building energy efficiency standards (Title 24) and the code compliance calculations. However, DOE-2.1E is a mature program that is no longer supported by LBNL on contract to the USDOE, or by any other public or private entity. With no more significant updates in the modeling capabilities of DOE-2.1E during recent years, DOE-2.1E lacks the ability to model, with the necessary accuracy, a number of building technologies that have the potential to reduce significantly the energy consumption of buildings in California. DOE-2's legacy software code makes it difficult and time consuming to add new or enhance existing modeling features in DOE-2. Therefore the USDOE proposed to develop a new tool, EnergyPlus, which is intended to replace DOE-2 as the next generation building simulation tool. EnergyPlus inherited most of the useful features from DOE-2 and BLAST, and more significantly added new modeling capabilities far beyond DOE-2, BLAST, and other simulations tools currently available. With California's net zero energy goals for new residential buildings in 2020 and for new commercial buildings in 2030, California needs to evaluate and promote currently available best practice and emerging technologies to significantly reduce energy use of buildings for space cooling and heating, ventilating, refrigerating, lighting, and water heating. The California Energy Commission (CEC) needs to adopt a new building energy simulation program for developing and maintaining future versions of Title 24. Therefore, EnergyPlus became a good candidate to CEC for its use in developing and complying with future Title 24 upgrades. In 2004, the Pacific Gas and Electric Company contracted with ArchitecturalEnergy Corporation (AEC), Taylor Engineering, and GARD Analytics to evaluate EnergyPlus in its ability to model those energy efficiency measures specified in both the residential and

  1. Energy conservation standards for new federal residential buildings: A decision analysis study using relative value discounting

    SciTech Connect (OSTI)

    Harvey, C. . Coll. of Business Administration); Merkhofer, M.M.; Hamm, G.L. )

    1990-07-02

    This report presents a reassessment of the proposed standard for energy conservation in new federal residential buildings. The analysis uses the data presented in the report, Economic Analysis: In Support of Interim Energy Conservation Standards for New Federal Residential Buildings (June 1988)-to be referred to as the EASIECS report. The reassessment differs from that report in several respects. In modeling factual information, it uses more recent forecasts of future energy prices and it uses data from the Bureau of the Census in order to estimate the distribution of lifetimes of residential buildings rather than assuming a hypothetical 25-year lifetime. In modeling social preferences decision analysis techniques are used in order to examine issues of public values that often are not included in traditional cost-benefit analyses. The present report concludes that the public would benefit from the proposed standard. Several issues of public values regarding energy use are illustrated with methods to include them in a formal analysis of a proposed energy policy. The first issue places a value on costs and benefits that will occur in the future as an irreversible consequence of current policy choices. This report discusses an alternative method, called relative value discounting which permits flexible discounting of future events-and the possibility of placing greater values on future events. The second issue places a value on the indirect benefits of energy savings so that benefits accrue to everyone rather than only to the person who saves the energy. This report includes non-zero estimates of the indirect benefits. The third issue is how the costs and benefits discussed in a public policy evaluation should be compared. In summary, selection of individual projects with larger benefit to cost ratios leads to a portfolio of projects with the maximum benefit to cost difference. 30 refs., 6 figs., 16 tabs. (JF)

  2. Building Energy Code

    Broader source: Energy.gov [DOE]

    In September 2011 the Nebraska Building Energy Code was updated to the 2009 International Energy Conservation Code (IECC) standards. As with the previous 2003 IECC standards, which had been in...

  3. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    7.1 National Legislation 7.2 Federal Tax Incentives 7.3 Efficiency Standards for Residential HVAC 7.4 Efficiency Standards for Commercial HVAC 7.5 Efficiency Standards for Residential Appliances 7.6 Efficiency Standards for Lighting 7.7 Water Use Standards 7.8 State Building Energy Codes 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire

  4. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    1.1 Buildings Sector Energy Consumption 1.2 Building Sector Expenditures 1.3 Value of Construction and Research 1.4 Environmental Data 1.5 Generic Fuel Quad and Comparison 1.6 Embodied Energy of Building Assemblies 2The Residential Sector 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy

  5. Building Energy Code

    Broader source: Energy.gov [DOE]

    Kansas adopted the 2006 International Energy Conservation Code (IECC) as "the applicable state standard" for commercial and industrial buildings. Enforcement is provided by local jurisdictions; t...

  6. Seminar on building codes and standards

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    A seminar was conducted for state building code officials and state energy officials to discuss the following: status of the states regulatory activities for energy conservation standards for buildings; the development, administration, and enforcement processes for energy conservation standards affecting new construction; lighting and thermal standards for existing buildings; status of the development and implementation of the Title III Program, Building Energy Performance Standards (BEPS); and current status of the State Energy Conservation Program. The welcoming address was given by John Wenning and the keynote address was delivered by John Millhone. Four papers presented were: Building Energy Performance Standards Development, James Binkley; Lighting Standards in Existing Buildings, Dorothy Cronheim; Implementation of BEPS, Archie Twitchell; Sanctions for Building Energy Performance Standards, Sue Sicherman.

  7. Upgrade energy building standards and develop rating system for existing low-income housing

    SciTech Connect (OSTI)

    Muller, D.; Norville, C.

    1993-07-01

    The city of Memphis Division of Housing and Community Development (HCD) receives grant funding each year from the U.S. Department of Housing and Urban Development (HUD) to provide local housing assistance to low-income residents. Through the years, HCD has found that many of the program recipients have had difficulty in managing their households, particularly in meeting monthly financial obligations. One of the major operating costs to low-income households is the utility bill. Furthermore, HCD`s experience has revealed that many low-income residents are simply unaware of ways to reduce their utility bill. Most of the HCD funds are distributed to low-income persons as grants or no/low interest loans for the construction or rehabilitation of single-family dwellings. With these funds, HCD builds 80 to 100 new houses and renovates about 500 homes each year. Houses constructed or renovated by HCD must meet HUD`s minimum energy efficiency standards. While these minimum standards are more than adequate to meet local building codes, they are not as aggressive as the energy efficiency standards being promoted by the national utility organizations and the home building industry. Memphis Light, Gas and Water (MLGW), a city-owned utility, has developed an award-winning program named Comfort Plus which promotes energy efficiency{open_quote} in new residential construction. Under Comfort Plus, MLGW models house plans on computer for a fee and recommends cost-effective alterations which improve the energy efficiency of the house. If the builder agrees to include these recommendations, MLGW will certify the house and guarantee a maximum annual heating/cooling bill for two years. While the Comfort Plus program has received recognition in the new construction market, it does not address the existing housing stock.

  8. EA-1926: Energy Efficiency Design Standards for New Federal Low-Rise Residential Buildings (RIN# 1904-AC61)

    Broader source: Energy.gov [DOE]

    This EA was to evaluate the potential environmental impacts of implementing the provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including low-rise residential buildings. DOE has canceled this EA and is replacing it with EA-2020.

  9. EA-2020: Energy Efficiency Design Standards for New Federal Low-Rise Residential Buildings (RIN# 1904-AD56)

    Broader source: Energy.gov [DOE]

    This EA will evaluate the potential environmental impacts of implementing the provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including low-rise residential buildings.

  10. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Massachusetts Board of Building Regulations and Standards has authority to promulgate the Massachusetts State Building Code (MSBC). The energy provisions in the MSBC were developed by the Boa...

  11. EA-2001: Energy Efficiency Design Standards: New Federal Commercial and Multi-Family High-Rise Residential Buildings and New Federal Low-Rise Residential Buildings

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) is publishing this final rule to implement provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal commercial and multi-family high-rise residential buildings. This rule updates the baseline Federal commercial standard to the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1-2013.

  12. Recommended Changes to Specifications for Demand Controlled Ventilation in California's Title 24 Building Energy Efficiency Standards

    SciTech Connect (OSTI)

    Fisk, William J.; Sullivan, Douglas P.; Faulkner, David

    2010-04-08

    In demand-controlled ventilation (DCV), rates of outdoor air ventilation are automatically modulated as occupant density varies. The objective is to keep ventilation rates at or above design specifications and code requirements and also to save energy by avoiding excessive ventilation rates. DCV is most often used in spaces with highly variable and sometime dense occupancy. In almost all cases, carbon dioxide (CO{sub 2}) sensors installed in buildings provide the signal to the ventilation rate control system. People produce and exhale CO{sub 2} as a consequence of their normal metabolic processes; thus, the concentrations of CO{sub 2} inside occupied buildings are higher than the concentrations of CO{sub 2} in the outdoor air. The magnitude of the indoor-outdoor CO{sub 2} concentration difference decreases as the building's ventilation rate per person increases. The difference between the indoor and outdoor CO{sub 2} concentration is also a proxy for the indoor concentrations of other occupant-generated bioeffluents, such as body odors. Reviews of the research literature on DCV indicate a significant potential for energy savings, particularly in buildings or spaces with a high and variable occupancy. Based on modeling, cooling energy savings from applications of DCV are as high as 20%. With support from the California Energy Commission and the U.S. Department of Energy, the Lawrence Berkeley National Laboratory has performed research on the performance of CO{sub 2} sensing technologies and optical people counters for DCV. In addition, modeling was performed to evaluate the potential energy savings and cost effectiveness of using DCV in general office spaces within the range of California climates. The above-described research has implications for the specifications pertaining to DCV in section 121 of the California Title 24 Standard. Consequently, this document suggests possible changes in these specifications based on the research findings. The suggested changes

  13. EA-2001: Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings' Baseline Standards Update (RIN 1904-AD39)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy (DOE) is publishing this final rule to implement provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal commercial and multi-family high-rise residential buildings. This rule updates the baseline Federal commercial standard to the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1-2013.

  14. Regional variations in US residential sector fuel prices: implications for development of building energy performance standards

    SciTech Connect (OSTI)

    Nieves, L.A.; Tawil, J.J.; Secrest, T.J.

    1981-03-01

    The Notice of Proposed Rulemaking for Energy Performance Standards for New Buildings presented life-cycle-cost based energy budgets for single-family detached residences. These energy budgets varied with regional climatic conditions but were all based on projections of national average prices for gas, oil and electricity. The Notice of Proposed Rulemaking indicated that further analysis of the appropriateness of various price measures for use in setting the Standards was under way. This part of that ongoing analysis addresses the availability of fuel price projections, the variation in fuel prices and escalation rates across the US and the effects of aggregating city price data to the state, Region, or national level. The study only provides a portion of the information required to identify the best price aggregation level for developing of the standards. The research addresses some of the economic efficiency considerations necessary for design of a standard that affects heterogeneous regions. The first section discusses the effects of price variation among and within regions on the efficiency of resource allocation when a standard is imposed. Some evidence of the extreme variability in fuel prices across the US is presented. In the second section, time series, cross-sectional fuel price data are statistically analyzed to determine the similarity in mean fuel prices and price escalation rates when the data are treated at increasing levels of aggregation. The findings of this analysis are reported in the third section, while the appendices contain price distributions details. The last section reports the availability of price projections and discusses some EIA projections compared with actual prices.

  15. Building Energy Asset Score: Building Owners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Owners Building Energy Asset Score: Building Owners The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies opportunities for users to invest in energy efficiency upgrades. It is web-based and free to use. View information

  16. Text-Alternative Version of Building America Webinar: Resolving Codes and Standard Issues to Energy Innovations

    Office of Energy Efficiency and Renewable Energy (EERE)

    Text-alternative version of the May 20 webinar on an overview of how Building America has impacted codes and standards in the past through technical and market innovations.

  17. Building America Webinar: Resolving Codes and Standards Issues to Energy Innovations

    Broader source: Energy.gov [DOE]

    Join us for a free webinar that will provide an overview of how Building America has impacted codes and standards in the past through technical and market innovations. Learn about new content on the Building America Solution Center that will help builders meet code requirements and will help code officials apply codes to new and emerging innovations. Our presenter will be:

  18. Voluntary Green Building Standards for Public Buildings

    Broader source: Energy.gov [DOE]

    NOTE: The program described below is a voluntary program that encourages state agencies to consider using green building standard. The State of Alabama does not have mandatory Green Building...

  19. Building America Webinar: Resolving Codes and Standards Issues...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: Resolving Codes and Standards Issues to Energy Innovations This webinar provided an overview of how Building America has impacted codes and standards in ...

  20. Buildings Energy Data Book: 7.3 Efficiency Standards for Residential...

    Buildings Energy Data Book [EERE]

    1 Efficiency Standards for Residential Central Air Conditioners and Heat Pumps (1) Type ... prior to January 23, 2010. 3) Seasonal Energy Efficiency Ratio. 4) Heating Seasonal ...

  1. Midwest Building Energy Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Midwest Building Energy Program Midwest Building Energy Program Building Codes Project for the 2013 Building Technologies Office's Program Peer Review bldgcodes02_paradis_040213.pdf (652.9 KB) More Documents & Publications Stretch/Reach Codes Appliance Standards and Building Codes Energy Code Compliance and Enforcement Best Practices

  2. Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting

    Buildings Energy Data Book [EERE]

    4 Lighting Standards for General Service Incandescent Lamps Prescribed by EISA 2007 General Service Incandescent Effective Date Maximum Wattage Rated Lumen Range Minimum Life Modified Spectrum General Service Incandescent Effective Date Maximum Wattage Rated Lumen Range Minimum Life By 2020, the minimum efficacy for general service incandescent will be 45 lm/W unless the Secretary of Energy has implemented another standard which saves as much or more energy than a 45 lm/W standard. Source(s): U.

  3. Building Energy Asset Score | Department of Energy

    Office of Environmental Management (EM)

    Energy Asset Score (Asset Score) is a national standardized tool for assessing the physical and structural energy efficiency of commercial and multifamily residential buildings. ...

  4. Building America Top Innovations 2014 Profile: California Energy Standards Recognize the Importance of Filter Selection

    SciTech Connect (OSTI)

    none,

    2014-11-01

    This 2014 Top Innovation profile describes Building America research on HVAC air filter sizing that prompted a change in the California “Title 24” Energy Code requiring filter manufacturers, HVAC designers, and HERS raters to make changes that will encourage the use of higher MERV filters without degrading HVAC performance.

  5. BuildingSync | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings » Analysis Tools » BuildingSync BuildingSync BuildingSync® is a standardized language for commercial building energy audit data that software developers can use to exchange data between audit tools. For information on BuildingSync, please visit https://buildingsync.net. Buildings Home About Emerging Technologies Residential Buildings Commercial Buildings Analysis Tools Standard Energy Efficiency Data Platform Building Performance Database Energy Asset Score OpenStudio

  6. Energy Efficient Buildings Hub

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Efficient Buildings HUB Lunch Presentation for the 2013 Building Technologies Office's Program Peer Review

  7. Energy Efficient Buildings Hub

    SciTech Connect (OSTI)

    2013-04-01

    Energy Efficient Buildings HUB Lunch Presentation for the 2013 Building Technologies Office's Program Peer Review

  8. Overcoming Codes and Standards Barriers to Innovations in Building Energy Efficiency

    SciTech Connect (OSTI)

    Cole, Pamala C.; Gilbride, Theresa L.

    2015-02-15

    In this journal article, the authors discuss approaches to overcoming building code barriers to energy-efficiency innovations in home construction. Building codes have been a highly motivational force for increasing the energy efficiency of new homes in the United States in recent years. But as quickly as the codes seem to be changing, new products are coming to the market at an even more rapid pace, sometimes offering approaches and construction techniques unthought of when the current code was first proposed, which might have been several years before its adoption by various jurisdictions. Due to this delay, the codes themselves can become barriers to innovations that might otherwise be helping to further increase the efficiency, comfort, health or durability of new homes. . The U.S. Department of Energy’s Building America, a program dedicated to improving the energy efficiency of America’s housing stock through research and education, is working with the U.S. housing industry through its research teams to help builders identify and remove code barriers to innovation in the home construction industry. The article addresses several approaches that builders use to achieve approval for innovative building techniques when code barriers appear to exist.

  9. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Rhode Island Building Code Standards Committee adopts, promulgates and administers the state building code. Compliance is determined through the building permit and inspection process by local...

  10. Building Energy Code

    Broader source: Energy.gov [DOE]

    The California Building Standards Commission (BSC) is responsible for administering California's building standards adoption, publication, and implementation. Since 1989, the BSC has published tr...

  11. Building Energy Modeling | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emerging Technologies » Building Energy Modeling Building Energy Modeling About the portfolio Building energy modeling (BEM)-physics-based calculation of building energy consumption-is a multi-use tool for building energy efficiency. Established use cases include design of new buildings and deep retrofits, development of whole-building energy efficiency codes and standards (e.g., ASHRAE 90.1) and performance-path compliance with those codes (e.g., ASHRAE 90.1 "Appendix G" Performance

  12. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    6.1 Electric Utility Energy Consumption 6.2 Electricity Generation, Transmission, and Distribution 6.3 Natural Gas Production and Distribution 6.4 Electric and Generic Quad Carbon Emissions 6.5 Public Benefit Funds/System Benefit Funds 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to

  13. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    5.1 Building Materials/Insulation 5.2 Windows 5.3 Heating, Cooling, and Ventilation Equipment 5.4 Water Heaters 5.5 Thermal Distribution Systems 5.6 Lighting 5.7 Appliances 5.8 Active Solar Systems 5.9 On-Site Power 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the

  14. Energy Conservation in State Buildings

    Broader source: Energy.gov [DOE]

    In 1992 the state enacted legislation requiring the Maryland Energy Administration (MEA) and the DGS to set energy performance standards that would reduce energy consumption in state buildings by...

  15. Office Buildings - Energy Consumption

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Consumption Office buildings consumed more than 17 percent of the total energy used by the commercial buildings sector (Table 4). At least half of total energy, electricity,...

  16. Buildings | Open Energy Information

    Open Energy Info (EERE)

    influence a building, including incentives, utilities, weather, climate, and locationground temperature. Municipalities and Renewable Energy Opportunities Building...

  17. Energy 101: Energy Efficient Commercial Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficient Commercial Buildings Energy 101: Energy Efficient Commercial Buildings

  18. Calculating Impacts of Energy Standards on Energy Demand in U.S. Buildings under Uncertainty with an Integrated Assessment Model: Technical Background Data

    SciTech Connect (OSTI)

    Scott, Michael J.; Daly, Don S.; Hathaway, John E.; Lansing, Carina S.; Liu, Ying; McJeon, Haewon C.; Moss, Richard H.; Patel, Pralit L.; Peterson, Marty J.; Rice, Jennie S.; Zhou, Yuyu

    2014-12-06

    This report presents data and assumptions employed in an application of PNNL’s Global Change Assessment Model with a newly-developed Monte Carlo analysis capability. The model is used to analyze the impacts of more aggressive U.S. residential and commercial building-energy codes and equipment standards on energy consumption and energy service costs at the state level, explicitly recognizing uncertainty in technology effectiveness and cost, socioeconomics, presence or absence of carbon prices, and climate impacts on energy demand. The report provides a summary of how residential and commercial buildings are modeled, together with assumptions made for the distributions of state–level population, Gross Domestic Product (GDP) per worker, efficiency and cost of residential and commercial energy equipment by end use, and efficiency and cost of residential and commercial building shells. The cost and performance of equipment and of building shells are reported separately for current building and equipment efficiency standards and for more aggressive standards. The report also details assumptions concerning future improvements brought about by projected trends in technology.

  19. SEED: Standard Energy Efficiency Data Platform

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEED: Standard Energy Efficiency Data Platform 2014 Building Technologies Office Peer ... that manage and publish building energy data: City disclosure ordinances, portfolio ...

  20. Buildings Energy Data Book: 7.4 Efficiency Standards for Commercial HVAC

    Buildings Energy Data Book [EERE]

    1 Efficiency Standards for Commercial Warm Air Furnaces Effective for products manufactured on or after January 1, 1994 Thermal Efficiency (1) Gas-fired, with capacity ≥ 225,000 Btu/hr Not less than 80% Oil-fired, with capacity ≥ 225,000 Btu/hr Not less than 81% Note(s): Source(s): 1) Measured at the maximum rated capacity. Title 10, Code of Federal Regulations, Part 431 - Energy Efficiency Program for Certain Commercial and Industrial Equipment, Subpart D - Commercial Warm Air Furna

  1. Building Energy Asset Score: Energy Services Companies, Engineers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. ...

  2. Buildings Energy Databook

    Buildings Energy Data Book [EERE]

    2 BUILDINGS ENERGY DATABOOK U.S. DEPARTMENT OF ENERGY OFFICE OF ENERGY EFFICIENCY AND RENEWABLE ENERGY DOE's Office of Energy Efficiency and Renewable Energy Buildings Energy Databook The United States Department of Energy's Office of Energy Efficiency and Renewable Energy has developed this Buildings Energy Databook to provide a current and accurate set of comprehensive buildings-related data and to promote the use of such data for consistency throughout DOE programs. The Databook is considered

  3. Building Energy Code

    Broader source: Energy.gov [DOE]

    Public Act 093-0936 (Illinois Energy Conservation Code for Commercial Buildings) was signed into law in August, 2004. The Illinois Energy Conservation Code for Commercial Buildings became...

  4. Building energy analysis tool

    DOE Patents [OSTI]

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  5. Building America Residential Buildings Energy Efficiency Meeting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Energy Efficiency Meeting: July 2010 Building America Residential Buildings Energy Efficiency Meeting: July 2010 On this page, you may link to the summary report and ...

  6. Climate-Specific Passive Building Standards

    SciTech Connect (OSTI)

    Wright, Graham S.; Klingenberg, Katrin

    2015-07-29

    In 2012, the U.S. Department of Energy (DOE) recognized the value of performance-based passive building standards when it joined with Passive House Institute US (PHIUS) to promote DOE’s Challenge Home program in tandem with the PHIUS+ Certification program. Since then, the number of passive building projects that have been certified under the partnership has grown exponentially because of some synergy. Passive building represents a well-developed approach to arrive at the envelope basis for zero energy and energy-positive projects by employing performance-based criteria and maximizing cost-effective savings from conservation before implementing renewable energy technologies. The Challenge Home program evolved into the Zero Energy Ready Home (ZERH) program in a move toward 1) attaining zero energy and 2) including active renewable energy generation such as photovoltaics (PV)—toward the zero energy goal.

  7. Building Energy Monitoring and Analysis

    SciTech Connect (OSTI)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01

    This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  8. Building Energy Code

    Broader source: Energy.gov [DOE]

    In 2006 Iowa enacted H.F. 2361, requiring the State Building Commissioner to adopt energy conservation requirements based on a nationally recognized building energy code. The State Building Code...

  9. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    Current and Past EditionsGlossaryPopular TablesQuery Tools Contact Us Search What Is the Buildings Energy Data Book? The Data Book includes statistics on residential and commercial building energy consumption. Data tables contain statistics related to construction, building technologies, energy consumption, and building characteristics. The Building Technologies Program within the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy developed this resource to provide a

  10. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    In March 2006, SB 459 was enacted to promote renewable energy and update the state's building energy codes.

  11. Calculating impacts of energy standards on energy demand in U...

    Office of Scientific and Technical Information (OSTI)

    The paper finds that aggressive building-energy codes and equipment standards are an effective, cost-saving way to reduce energy consumption in buildings and greenhouse gas ...

  12. Building Energy Monitoring and Analysis

    SciTech Connect (OSTI)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01

    U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  13. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    3.1 Commercial Sector Energy Consumption 3.2 Commercial Sector Characteristics 3.3 Commercial Sector Expenditures 3.4 Commercial Environmental Emissions 3.5 Commercial Builders and Construction 3.6 Office Building Markets and Companies 3.7 Retail Markets and Companies 3.8 Hospitals and Medical Facilities 3.9 Educational Facilities 3.10 Hotels/Motels 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and

  14. Buildings | Open Energy Information

    Open Energy Info (EERE)

    work, live, learn, govern, heal, worship, and play in buildings-and they require enormous energy resources. Related Links Buildings Gateway Retrieved from "http:en.openei.orgw...

  15. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Connecticut Office of the State Building Inspector establishes and enforces building, electrical, mechanical, plumbing and energy code requirements by reviewing, developing, adopting and...

  16. Building Energy Code

    Broader source: Energy.gov [DOE]

    Note: Much of the information presented in this summary is drawn from the U.S. Department of Energys (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  17. Whole Building Energy Simulation

    Broader source: Energy.gov [DOE]

    Whole building energy simulation, also referred to as energy modeling, can and should be incorporated early during project planning to provide energy impact feedback for which design considerations...

  18. EA-1918: Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and MultiFamily High-Rise Residential Buildings" RIN 1904-AC60

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of implementing provisions in the Energy Conservation and Production Act (ECPA) that require DOE to update the baseline Federal energy efficiency performance standards for the construction of new Federal buildings, including commercial and multi-family high-rise residential buildings. This EA addresses Federal commercial standard to the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90.1-2010. The Final Rule was published in the Federal Register on July 9, 2013, 78 FR 40945.

  19. State building energy codes status

    SciTech Connect (OSTI)

    1996-09-01

    This document contains the State Building Energy Codes Status prepared by Pacific Northwest National Laboratory for the U.S. Department of Energy under Contract DE-AC06-76RL01830 and dated September 1996. The U.S. Department of Energy`s Office of Codes and Standards has developed this document to provide an information resource for individuals interested in energy efficiency of buildings and the relevant building energy codes in each state and U.S. territory. This is considered to be an evolving document and will be updated twice a year. In addition, special state updates will be issued as warranted.

  20. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    The Energy Index for Commercial Buildings Welcome to the Energy Index for Commercial Buildings. Data for this tool comes from the Energy Information Administration's (EIA) 2003 Commercial Buildings Energy Consumption Survey (CBECS). Select categories from the CBECS micro data allow users to search on common building characteristics that impact energy use. Users may select multiple criteria, however if the resulting sample size is too small, the data will be unreliable. If nothing is selected

  1. Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances

    Buildings Energy Data Book [EERE]

    2 Efficiency Standards for Residential Refrigerators and Freezers (1) 1) 2) 3) 4) 5) 6) Note(s): Source(s): Refrigerator-freezers, automatic defrost with side-mounted freezer with through-the-door ice service 10.10AV + 406.0 1) Effective for products manufactured on or after July 1, 2001. Standards do not apply to refrigerators and refrigerator-freezers with total refrigerated volume exceeding 39 cubic feet or freezers with total refrigerated volume exceeding 30 cubic feet. AV = total adjusted

  2. Buildings Energy Data Book: 7.7 Efficiency Standards for Lighting

    Buildings Energy Data Book [EERE]

    Efficiency Standards for Lighting March 2011 7.7.2 Efficiency Standards for General Service Fluorescent Lamps Effective for products manufactured before July 14, 2012 Minimum Nominal Lamp Average Lamp Lamp Type (1) Wattage (W) Minimum CRI Efficacy (lm/W) Effective Date 4-Foot Medium Bipin >35 69 75.0 November 1, 1995 4-Foot Medium Bipin 45 75.0 November 1, 1995 2-Foot U-Shaped >35 69 68.0 November 1, 1995 2-Foot U-Shaped 45 64.0 November 1, 1995 8-Foot Slimline >65 69 80.0 May 1, 1994

  3. City of Berkeley - Green Building Standards for City Owned and...

    Broader source: Energy.gov (indexed) [DOE]

    State California Program Type Energy Standards for Public Buildings Summary The Berkeley City Council adopted Resolution 62284 on November 18, 2003 requiring that all...

  4. Standard Energy Efficiency Data Platform | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings Analysis Tools Standard Energy Efficiency Data Platform Standard Energy Efficiency Data Platform The SEED Platform(tm) makes it easy to utilize and share ...

  5. Building America Webinar: Standardized Retrofit Packages - What...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: Standardized Retrofit Packages - What Works to Meet Consistent Levels of Performance? This webinar focused on specific Building America projects that ...

  6. Buildings Energy Data Book: 7.5 Efficiency Standards for Residential...

    Buildings Energy Data Book [EERE]

    Residential Room Air Conditioners (1) Note(s): Source(s): 20,000+ 8.5 20,000+ 8.5 1) Effective for products manufactured on or after October 1, 2000. 2) EER Energy Efficiency ...

  7. Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting

    Buildings Energy Data Book [EERE]

    2 Efficiency Standards for Incandescent Reflector Lamps (1) Effective for lamps manufactured after November 1, 1995 and before July 14, 2012 Minimum Nominal Average Lamp Lamp Wattage Efficacy (lm/W) 40-50 10.5 51-66 11.0 67-85 12.5 86-115 14.0 116-155 14.5 156-205 15.0 Effective for lamps manufactured on or after July 14, 2012 Minimum Rated Lamp Rated Average Lamp Lamp Wattage Lamp Spectrum Diameter (in) Voltage (V) Efficacy (lm/W) (2) 40-205 Standard Spectrum >2.5 ≥125 6.8*P^0.27 40-205

  8. Buildings Energy Data Book: 7.3 Efficiency Standards for Residential HVAC

    Buildings Energy Data Book [EERE]

    3 Efficiency Standards for Residential Boilers Effective for products manufactured before September 1, 2012 AFUE(%) (1) Boilers (excluding gas steam) Gas Steam Boilers Effective for products manufactured on or after September 1, 2012 (2) AFUE (%) (1) No Constant Burning Pilot Automatic Means for Adjusting Water Temperature Gas Steam No Constant Burning Pilot Oil Hot Water Automatic Means for Adjusting Water Temperature Oil Steam None Electric Hot water Automatic Means for Adjusting Water

  9. City of Phoenix- Design Standards for City Buildings

    Broader source: Energy.gov [DOE]

    The City of Phoenix has had energy standards for public buildings in place since 2005. In June 2005, the Phoenix City Council adopted a policy requiring all new city buildings built with 2006 bond...

  10. EA-1463: 10 CFR 433: Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential Buildings and 10 CFR 435: Energy Efficiency Standards for New Federal Residential Low-Rise Residential Buildings

    Broader source: Energy.gov [DOE]

    The EA examines the potential environmental impacts of the Final Rule on building habitability and the outdoor environment. To identify the potential environmental impacts that may result from implementing the Final Rule for new Federal commercial and residential buildings, DOE compared the Final Rule with the “no-action alternative” of using the current Federal standards – 10 CFR Part 434 and 10 CFR Part 435 Subpart C (referred to as the “no-action alternative”).

  11. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Board of Building Standards is the primary state agency that protects the public's safety by: adopting rules governing the construction, repair, and rehabilitation of buildings in the state;...

  12. Buildings Energy Data Book: 7.3 Efficiency Standards for Residential HVAC

    Buildings Energy Data Book [EERE]

    2 Efficiency Standards for Residential Furnaces AFUE (%) (2) Furnaces (excluding classes noted below) 78 Mobile Home Furnaces 75 Small Furnaces with input rate < 45,000 Btu/hr (1) - Weatherized (outdoor) 78 - Non-Weatherized (indoor) 78 AFUE (%) (2) Non-Weatherized Gas Furnaces 80 Weatherized Gas Furnaces 81 Mobile Home Oil-Fired Furnaces 75 Mobile home Gas Furnaces 80 Non-Weatherized Oil-Fired Furnaces 82 Weatherized Oil-Fired Furnaces 78 Note(s): 1) Excludes those intended solely for

  13. Buildings Energy Data Book: 7.4 Efficiency Standards for Commercial HVAC

    Buildings Energy Data Book [EERE]

    2 Efficiency Standards for Commercial Packaged Boilers Effective for products manufactured between January 1, 1994 and March 1, 2012 Combustion Efficiency (1) Gas-fired, with capacity ≥ 300,000 Btu/hr Not less than 80% Oil-fired, with capacity ≥ 300,000 Btu/hr Not less than 83% Effective for products manufactured on or after March 2, 2012 Size (Btu/hr) Efficiency Level (1) Gas-fired, hot water ≥300,000 and ≤2,500,000 80% thermal efficiency Gas-fired, hot water >2,500,000 82%

  14. Buildings Energy Data Book: 7.4 Efficiency Standards for Commercial HVAC

    Buildings Energy Data Book [EERE]

    3 Efficiency Standards for Commercial Air Conditioners and Heat Pumps (1) Type Cooling Capacity (Btu/hr) Category (2) Efficiency Level Small commercial package air conditioning <65,000 AC SEER = 13.0 and heating equipment (air-cooled, HP SEER = 13.0 three-phase) Single package vertical air conditioners and <65,000 AC EER = 9.0 single package vertical heat pumps, HP EER = 9.0, COP = 3.0 single-phase and three phase Single package vertical air conditioners and ≥65,000 and <135,000 AC

  15. Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances

    Buildings Energy Data Book [EERE]

    3 Efficiency Standards for Residential Water Heaters (1) Effective for products manufactured from January 20, 2004 through April 15, 2015 Gas-Fired Storage Water Heaters Oil-Fired Water Heaters EF = 0.67 - (0.0019 x Rated Storage Volume in gallons) EF = 0.59 - (0.0019 x Rated Storage Volume in gallons) Instantaneous Gas-Fired Water Heaters Instantaneous Electric and Table Top Water Heaters EF = 0.62 - (0.0019 x Rated Storage Volume in gallons) EF = 0.93 - (0.00132 x Rated Storage Volume in

  16. Buildings Energy Data Book: 7.5 Efficiency Standards for Residential Appliances

    Buildings Energy Data Book [EERE]

    4 Efficiency Standards for Wet Cleaning Equipment Effective from products manufactured from January 1, 2007 through December 31, 2011 Top-Loading, Compact (Capacity < 1.6 ft^3) Front-Loading, Compact (Capacity < 1.6 ft^3) Top-Loading, Semi-Automatic (1) Suds-Saving (1) Effective for products manufactured on or after January 1, 2011 Top-Loading, Compact (Capacity ≥ 1.6 ft^3) Front-Loading, Compact (Capacity ≥ 1.6 ft^3) Dishwashers: Effective for products manufactured on or after January

  17. Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting

    Buildings Energy Data Book [EERE]

    1 Efficiency Standards for General Service Fluorescent Lamps Effective for products manufactured before July 14, 2012 Minimum Nominal Lamp Average Lamp Lamp Type (1) Wattage (W) Minimum CRI Efficacy (lm/W) Effective Date 4-Foot Medium Bipin >35 69 75.0 November 1, 1995 4-Foot Medium Bipin ≤35 45 75.0 November 1, 1995 2-Foot U-Shaped >35 69 68.0 November 1, 1995 2-Foot U-Shaped ≤35 45 64.0 November 1, 1995 8-Foot Slimline >65 69 80.0 May 1, 1994 8-Foot Slimline ≤65 45 80.0 May 1,

  18. Buildings Energy Data Book: 7.6 Efficiency Standards for Lighting

    Buildings Energy Data Book [EERE]

    3 Efficiency Standards for Medium Base Compact Fluorescent Lamps (1) Factor Requirements Lamp Power (W) & Configuration Minimum Efficacy: lumens/watt (based upon initial lumen data) Bare Lamp: Lamp Power < 15 45.0 Lamp Power ≥ 15 60.0 Covered Lamp (no reflector): Lamp Power < 15 40.0 15 ≤ Lamp Power < 19 48.0 19 ≤ Lamp Power < 25 50.0 25 ≤ Lamp Power 55.0 Note(s): Source(s): 1) Effective for products manufactured on or after January 1, 2006

  19. Building Energy Asset Score: Real Estate Managers

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies opportunities for users to invest in energy efficiency upgrades. It is web-based and free to use.

  20. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Maryland Building Performance Standards (MBPS) are adopted by the Maryland Department of Housing and Community Development (DHCD) Codes Administration. As required by legislation passed in...

  1. Southeast Energy Efficiency Alliance's Building Energy Codes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southeast Energy Efficiency Alliance's Building Energy Codes Project Southeast Energy Efficiency Alliance's Building Energy Codes Project Building Codes Project for the 2013 ...

  2. 2015 Building Energy Summit

    Broader source: Energy.gov [DOE]

    The 2015 Building Energy Summit brings together leaders from both the public and private sector to debate and discuss energy efficient technologies and solutions, energy policy, funding and incentives, alternative sources of energy, and more.

  3. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    Explore Survey Data from the Energy Information Administration Follow the links below to two easy-to-use query tools, developed exclusively for this website. With these tools you can explore results from the Commercial Buildings Energy Consumption Survey (CBECS) and the Residential Energy Consumption Survey (RECS). Commercial Buildings Energy Index Use this custom query tool to analyze micro data from CBECS 2003. Residential Buildings Energy Index Use this custom Microsoft Excel pivot table to

  4. Building Energy Codes Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program U.S. Department of Energy Building Technologies Office Jeremy Williams, Project Manager Building Technologies Peer Review April 2014 Presentation Overview: * Introduction * Statutory Requirements * Program Structure * Recent accomplishments 2 Introduction: Background NATIONAL STATE LOCAL Building codes are developed through national industry consensus processes with input from industry representatives, trade organizations, government officials, and the general public Model energy codes

  5. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  6. Building Energy Code

    Broader source: Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more deta...

  7. Building Energy Code

    Broader source: Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  8. Guam- Building Energy Code

    Broader source: Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energy’s (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  9. Building Energy Code

    Broader source: Energy.gov [DOE]

    Missouri does not have a statewide building or energy code for private residential and commercial buildings, and there currently is no state regulatory agency authorized to promulgate, adopt, or...

  10. Better Buildings Energy Data Accelerator

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Energy Data Accelerator *NEW PROJECT* 2014 Building Technologies Office ... 5. Successfully provide whole-building data access to 20% of included building owners ...

  11. Energy Efficient Buildings Hub

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy created the Energy Efficient Buildings Hub in Philadelphia, Pennsylvania to promote regional job creation and economic growth while also improving the energy...

  12. Local Option- Property Tax Assessment for Energy Efficient Buildings

    Broader source: Energy.gov [DOE]

    An energy-efficient building is defined as any building that exceeds the energy efficiency standards of the Virginia Uniform Statewide Building Code by 30%; meets performance standards of the...

  13. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    8.1 Buildings Sector Water Consumption 8.2 Residential Sector Water Consumption 8.3 Commercial Sector Water Consumption 8.4 WaterSense 8.5 Federal Government Water Usage 9Market Transformation Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables This chapter includes data on water use in commercial and residential buildings and the energy

  14. Building Energy Asset Score: Energy Services Companies, Engineers and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consultants | Department of Energy Energy Services Companies, Engineers and Consultants Building Energy Asset Score: Energy Services Companies, Engineers and Consultants The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies

  15. Building Energy Asset Score: Utilities and Energy Efficiency Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Administrators | Department of Energy Utilities and Energy Efficiency Program Administrators Building Energy Asset Score: Utilities and Energy Efficiency Program Administrators The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and

  16. Energy Efficient Buildings Hub

    Broader source: Energy.gov [DOE]

    Science and industry work together to improve energy efficiency and reduce carbon emissions of both new and existing buildings while also stimulating private investment and quality job creation.

  17. Building Energy Codes

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    David Cohan Program Manager Building Energy Codes April 22, 2014 Presentation Outline * Mission * Goals * Program Organization * StrategiesRoles * Near-Term Focus * Measuring ...

  18. Building Energy Modeling Library

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modeling (BEM) Library TDM - Amir Roth Ellen Franconi Rocky Mountain Institute ... Project Overview Building Energy Modeling (BEM) Library * Define and develop a ...

  19. Commercial Energy Efficiency Rebate for Existing Buildings

    Broader source: Energy.gov [DOE]

    Business customers retrofitting existing buildings through measures not covered under the standard incentive program can still receive financial assistance from Energy Trust through the custom...

  20. City of Chicago- Building Energy Code

    Broader source: Energy.gov [DOE]

    The CECC establishes standards to minimize solar energy absorbed by building roofs, a condition known as the urban heat island effect. Increased reflecting capacity of individual and aggregate...

  1. Building Energy Consumption Analysis

    Energy Science and Technology Software Center (OSTI)

    2005-03-02

    DOE2.1E-121SUNOS is a set of modules for energy analysis in buildings. Modules are included to calculate the heating and cooling loads for each space in a building for each hour of a year (LOADS), to simulate the operation and response of the equipment and systems that control temperature and humidity and distribute heating, cooling and ventilation to the building (SYSTEMS), to model energy conversion equipment that uses fuel or electricity to provide the required heating,more » cooling and electricity (PLANT), and to compute the cost of energy and building operation based on utility rate schedule and economic parameters (ECONOMICS).« less

  2. Building Energy Modeling Projects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emerging Technologies » Building Energy Modeling » Building Energy Modeling Projects Building Energy Modeling Projects View the Building Technologies Office's current portfolio of Building Energy Modeling projects. Core Projects AIA 2030 Commitment Portal Energy Modeling Community Resources EnergyPlus Modelica Buildings Library OpenStudio Radiance Test Procedures For Building Energy Simulation Tools Competitively Awarded Projects BENEFIT: A New Hybrid Approach to Energy Modeling BUILD:

  3. Energy Efficiency Resource Standard

    Broader source: Energy.gov [DOE]

    Washington voters passed Initiative 937 in 2006, creating a renewable energy standard and an energy efficiency resource standard for the state's electric utilities. Initiative 937, enacted as th...

  4. Building Energy Code

    Broader source: Energy.gov [DOE]

    A mandatory energy code is not enforced at the state level. If a local energy code is adopted, it is enforced at the local level. Builders or sellers of new residential buildings (single-family or...

  5. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    NOTE: On March 9, 2016, the State Fire Prevention and Building Code Council adopted major updates to the State Uniform Code and the State Energy Code. The State Energy Code has been updated to 2015...

  6. Building Energy Code

    Broader source: Energy.gov [DOE]

    Colorado is a home rule state, so no statewide energy code exists, although state government buildings do have specific requirements. Voluntary adoption of energy codes is encouraged and efforts...

  7. Commercial Buildings Energy Consumption Survey - Office Buildings

    Reports and Publications (EIA)

    2010-01-01

    Provides an in-depth look at this building type as reported in the 2003 Commercial Buildings Energy Consumption Survey. Office buildings are the most common type of commercial building and they consumed more than 17% of all energy in the commercial buildings sector in 2003. This special report provides characteristics and energy consumption data by type of office building (e.g. administrative office, government office, medical office) and information on some of the types of equipment found in office buildings: heating and cooling equipment, computers, servers, printers, and photocopiers.

  8. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    9Market Transformation 9.1 ENERGY STAR 9.2 LEED 9.3 Certification Programs 9.4 High Performance Buildings Glossary Acronyms and Initialisms Technology Descriptions Building Descriptions Other Data Books Biomass Energy Transportation Energy Power Technologies Hydrogen Download the Entire Book Skip down to the tables This chapter contains data on two market transformation programs that reach across the United States and to other countries: the ENERGY STAR program, jointly administered by the U.S.

  9. About Building Energy Modeling | Department of Energy

    Office of Environmental Management (EM)

    design of low-energy building control algorithms, continuous commissioning of building mechanical systems, and dynamic building control for energy optimization or demand response. ...

  10. Resolving Code and Standard Barriers to Building America Innovations - 2014

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BTO Peer Review | Department of Energy Resolving Code and Standard Barriers to Building America Innovations - 2014 BTO Peer Review Resolving Code and Standard Barriers to Building America Innovations - 2014 BTO Peer Review Presenter: Pam Cole, Pacific Northwest National Laboratory This project is developing processes and resources for a Codes and Standards Innovation (CSI) team to assist research partners and industry in overcoming codes and standards barriers to high-performance

  11. Building Code Compliance and Enforcement: The Experience of SanFrancisco's Residential Energy Conservation Ordinanace and California'sBuildign Standards for New Construction

    SciTech Connect (OSTI)

    Vine, E.

    1990-11-01

    As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeable about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. Because statewide codes are enforced by local officials, these problems may increase over time as energy standards change and become more complex and as other standards (eg, health and

  12. Building Energy Asset Score: Architects | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Architects Building Energy Asset Score: Architects The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifices opportunities for users to invest in energy efficiency upgrades. It is web-based and free to use. View additional information

  13. Energy Efficiency Product Standards

    Broader source: Energy.gov [DOE]

    New Jersey Energy Efficiency Product Standards, enacted in 2005, include minimum standards for eight products, which were preempted by the federal Energy Policy Act of 2005. Future standards, if...

  14. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    Most Popular Tables PDFXLS 1.1.1 U.S. Residential and Commercial Buildings Total Primary Energy Consumption PDFXLS 3.1.4 2010 Commercial Energy End-Use Splits, by Fuel Type PDFXLS 1.1.3 Buildings Share of U.S. Primary Energy Consumption PDFXLS 3.1.1 Commercial Primary Energy Consumption, by Year and Fuel Type PDFXLS 2.1.1 Residential Primary Energy Consumption, by Year and Fuel Type PDFXLS 3.1.5 2015 Commercial Energy End-Use Splits, by Fuel Type PDFXLS 3.2.1 Total Commercial Floorspace and

  15. EA-2001: Energy Efficiency Design Standards: New Federal Commercial...

    Energy Savers [EERE]

    2001: Energy Efficiency Design Standards: New Federal Commercial and Multi-Family High-Rise Residential Buildings and New Federal Low-Rise Residential Buildings EA-2001: Energy...

  16. Renewable Energy Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    Note: H.B. 40, enacted in June 2015, created Vermont's Renewable Energy Standard and repeals the Sustainably Priced Energy Enterprise Development program's renewable energy goals. The Renewable...

  17. Energy Efficiency Building Code for Commercial Buildings in Sri Lanka

    SciTech Connect (OSTI)

    Busch, John; Greenberg, Steve; Rubinstein, Francis; Denver, Andrea; Rawner, Esther; Franconi, Ellen; Huang, Joe; Neils, Danielle

    2000-09-30

    1.1.1 To encourage energy efficient design or retrofit of commercial buildings so that they may be constructed, operated, and maintained in a manner that reduces the use of energy without constraining the building function, the comfort, health, or the productivity of the occupants and with appropriate regard for economic considerations. 1.1.2 To provide criterion and minimum standards for energy efficiency in the design or retrofit of commercial buildings and provide methods for determining compliance with them. 1.1.3 To encourage energy efficient designs that exceed these criterion and minimum standards.

  18. Building Energy Code

    Broader source: Energy.gov [DOE]

    New Hampshire adopted a mandatory statewide building code in 2002 based on the 2000 IECC. S.B. 81 was enacted in July 2007, and it upgraded the New Hampshire Energy Code to the 2006 IECC. In Dece...

  19. Building Energy Code

    Office of Energy Efficiency and Renewable Energy (EERE)

    The State Building Code Council revised the Washington State Energy Code (WESC) in February 2013, effective July 1, 2013. The WESC is a state-developed code based upon ASHRAE 90.1-2010 and the...

  20. Building Energy Asset Score

    Broader source: Energy.gov [DOE]

    Lead Performer: Pacific Northwest National Laboratory (PNNL) – Richland, WAProject Term: Ongoing ProgramFunding Type: Direct Lab FundingProgram Webpage: Commercial Building Energy Asset Score Homepage

  1. Building Energy Code

    Broader source: Energy.gov [DOE]

    In November of 2015, the Commission adopted the 2015 International Building Code (IBC) with amendments. The Commission did not adopt the 2012 International Energy Conservation Code (IECC) as part...

  2. Building Energy Code

    Broader source: Energy.gov [DOE]

    Changes to the energy code are submitted to the Uniform Building Code Commission. The proposed change is reviewed by the Commission at a monthly meeting to decide if it warrants further considera...

  3. Autotune Building Energy Models

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BTO Goals: supports the BTO overarching goal of reducing building energy use 50% by 2030 BTO strategic programs: Autotune is listed as a "key service" within the BTO Strategic BEM ...

  4. Building America Webinar: Standardized Retrofit Packages - What Works to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Meet Consistent Levels of Performance? | Department of Energy Standardized Retrofit Packages - What Works to Meet Consistent Levels of Performance? Building America Webinar: Standardized Retrofit Packages - What Works to Meet Consistent Levels of Performance? This webinar focused on specific Building America projects that have examined methods to consistently meet high levels of energy performance in existing homes, with a focus on retrofit packages that can be replicated across many homes.

  5. Climate-Specific Passive Building Standards

    SciTech Connect (OSTI)

    Wright, Graham S.; Klingenberg, Katrin

    2015-07-01

    Passive design principles (super insulation, airtight envelopes, elimination of thermal bridges, etc.) - pioneered in North America in the 70s and 80s and refined in Europe in the 90s have proven to be universally effective to significantly reduce heating and cooling loads. However, a single, rigid performance metric developed in Germany has led to limited uptake of passive building principles in many regions of the United States. It has also, in many cases, promoted some design decisions that had negative effects on economic feasibility and thermal comfort. This study's main objective is to validate (in a theoretical sense) verifiable, climate-specific passive standards and space conditioning criteria that retain ambitious, environmentally-necessary energy reduction targets and are economically feasible, such standards provide designers an ambitious but achievable performance target on the path to zero.

  6. Building America Webinar: Saving Energy in Multifamily Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Saving Energy in Multifamily Buildings Building America Webinar: Saving Energy in Multifamily Buildings This webinar introduced the Building America team Partnership for Advanced ...

  7. Building Energy Code

    Broader source: Energy.gov [DOE]

    Pennsylvania Department of Labor and Industry (DLI) has the authority to upgrade commercial and residential energy standards through the regulatory process. The current code, the 2009 UCC, became...

  8. Building Energy Code

    Broader source: Energy.gov [DOE]

    Georgia's Department of Community Affairs periodically reviews, amends and/or updates the state minimum standard codes. Georgia has "mandatory" and "permissive" codes. Georgia State Energy Code...

  9. Building Energy Consumption Analysis

    Energy Science and Technology Software Center (OSTI)

    2005-01-24

    DOE2.1E-121 is a set of modules for energy analysis in buildings. Modules are included to calculate the heating and cooling loads for each space in a building for each hour of a year (LOADS), to simulate the operation and response of the equipment and systems that control temperature and humidity and distribute heating, cooling and ventilation to the building (SYSTEMS), to model energy conversion equipment that uses fuel or electricity to provide the required heating,more » cooling and electricity (PLANT), and to compute the cost of energy and building operation based on utility rate schedule and economic parameters (ECONOMICS). DOE2.1E-121 contains modifications to DOE2.1E which allows 1000 zones to be modeled.« less

  10. DOE standard compliance demonstration program: An office building example

    SciTech Connect (OSTI)

    Bailey, S.A.; Keller, J.M.; Wrench, L.E.; Williams, C.J.

    1993-06-01

    The US Department of Energy (DOE) issued interim new building energy standards (10 CFR 435 1989) to achieve maximum energy efficiency in the designs of new buildings. DOE then entered into a project to demonstrate and assess the impact of these standards on the design community. One area of focus was a test to see how a less conventional design-focused building would meet the standards` requirements -- DOE wanted to demonstrate that compliance with energy standards does not mean compromising the architectural intent of a building. This study, which was initiated at Pacific Northwest Laboratory (PNL), illustrated the process by which compliance with the standards can be proven for a highly {open_quotes}design-oriented{close_quotes} office building. The study also assessed the impact of the whole building simulation compliance alternatives on design. This report documents the compliance requirements, gives a description of the sample building chosen for the study, provides general guidance for the compliance process, documents the method of compliance that was undertaken for the sample building, presents the results of the study, and provides a recommendation on how the compliance requirements could be improved to reflect more realistic use types.

  11. Building Energy Code

    Broader source: Energy.gov [DOE]

    The 1993 State Legislature updated the state energy code to the 1989 Model Energy Code (MEC) and established a procedure to update the standard. Then in 1995, following consultation with an...

  12. Energy Information Administration (EIA)- Commercial Buildings Energy

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumption Survey (CBECS) Data 5 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics Data from the 1995 Commercial Buildings Energy Consumption Survey (CBECS) are presented in three groups of detailed tables: Buildings Characteristics Tables, number of buildings and amount of floorspace for major building characteristics. Energy Consumption and Expenditures Tables, energy

  13. Building Energy Asset Score Frequently Asked Questions | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Commercial Buildings » Analysis Tools » Energy Asset Score » Building Energy Asset Score Frequently Asked Questions Building Energy Asset Score Frequently Asked Questions This page features answers to the most frequently asked questions about the Building Energy Asset Score. Choose from the list of questions below to learn more: Program Overview What is the Building Energy Asset Score? The Building Energy Asset Score is a national standardized tool for assessing the physical and

  14. Better Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Better Buildings Hilton Worldwide and Whole Foods Market energy teams SWAP buildings in San Francisco, CA Hilton Worldwide and Whole Foods Market energy teams SWAP buildings in San Francisco, CA In the Better Buildings Challenge SWAP, brought to you by the U.S. Department of Energy, Hilton Worldwide and Whole Foods Market - two industry giants at the top of their game in energy conservation - swap energy teams to conduct an energy audit and uncover energy savings at each other's

  15. Appliance Energy Efficiency Standards

    Broader source: Energy.gov [DOE]

    In 2004 the Energy Efficiency Standards Act (EESA of 2004) became law in the State of Maryland. The General Assembly passed the EESA to establish minimum energy efficiency standards on nine...

  16. Energy Conservation Standards Activities

    Broader source: Energy.gov (indexed) [DOE]

    Report to Congress August 2014 United States Department of Energy Washington, DC 20585 Energy Conservation Standards Activities Report to Congress | Page i Message from the ...

  17. California Energy Standards Recognize the Importance of Filter...

    Energy Savers [EERE]

    California Energy Standards Recognize the Importance of Filter Selection - Building America Top Innovation California Energy Standards Recognize the Importance of Filter Selection ...

  18. Zero Energy Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings » Zero Energy Buildings Zero Energy Buildings Zero Energy Buildings Zero energy buildings combine energy efficiency and renewable energy generation to consume only as much energy as can be produced onsite through renewable resources over a specified time period. Achieving zero energy is an ambitious yet increasingly achievable goal that is gaining momentum across geographic regions and markets. Private commercial property owners have a growing interest in developing zero

  19. Building Energy Code | Open Energy Information

    Open Energy Info (EERE)

    Building Energy Code Jump to: navigation, search Building energy codes adopted by states (and some local governments) require commercial andor residential construction to adhere...

  20. Building Energy Codes | Open Energy Information

    Open Energy Info (EERE)

    Building Energy Codes Jump to: navigation, search Building energy codes adopted by states (and some local governments) require commercial andor residential construction to adhere...

  1. Energy Information Administration (EIA)- Commercial Buildings Energy

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumption Survey (CBECS) Data 9 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics Data from the 1999 Commercial Buildings Energy Consumption Survey (CBECS) are presented in the Building Characteristics tables, which include number of buildings and total floorspace for various Building Characteristics, and Consumption and Expenditures tables, which include energy usage figures

  2. Energy Conservation Standards Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report to Congress August 2014 United States Department of Energy Washington, DC 20585 Energy Conservation Standards Activities Report to Congress | Page i Message from the Assistant Secretary I am pleased to provide you with the semi-annual Implementation Report on Energy Conservation Standards Activities of the U.S. Department of Energy (DOE). This report meets the requirements of Section 141 of the Energy Policy Act of 2005 (EPACT 2005) and Sections 305 and 321 of the Energy Independence and

  3. Background to the development process, Automated Residential Energy Standard (ARES) in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 3

    SciTech Connect (OSTI)

    1989-09-01

    This report documents the development and testing of a set of recommendations generated to serve as a primary basis for the Congressionally-mandated residential standard. This report treats only the residential building recommendations.

  4. Building Solutions | Open Energy Information

    Open Energy Info (EERE)

    Building Solutions Jump to: navigation, search Name: Building Solutions Place: California Sector: Efficiency Product: California-based energy efficiency contractor and consultancy....

  5. Commercial Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Science & Innovation Energy Efficiency Commercial Buildings Commercial Buildings At an estimated cost of 38 ... questions -- from how to lower your cooling costs to ways ...

  6. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    Glossary Acronyms and Initialisms Technology Descriptions Residential Space Heating Residential Space Cooling Residential Water Heating Commercial Space Cooling Commercial Space Heating Commercial Refrigeration Lighting Building Descriptions Commercial Residential Acronyms and Initialisms A B C D E F G H I L M N O P Q R S U V AAMA - American Architectural Manufacturers Association ACEEE - American Council for an Energy Efficient Economy AEO - EIA's Annual Energy Outlook AFEAS - Alternative

  7. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    5.5 : Thermal Distribution Systems 5.5.1 Market Share of Major HVAC Equipment Manufacturers ($2009 Million) Total Market Size Air-Handling Units 1032 Cooling Towers 533 Pumps 333 Central System Terminal Boxes 192 Classroom Unit Ventilator 160 Fan Coil Units 123 DOWNLOAD TABLE AS PDF XLS Related Tables: PDFXLS 5.5.6 1999 Energy Efficient Motors, Replacements and Sales, by Horsepower Class Sources: BTS/A.D. Little, Energy Consumption Characteristics of Commercial Building HVAC Systems, Volume II:

  8. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    SciTech Connect (OSTI)

    Wall, L.W.; Rosenfeld, A.H.

    1982-12-01

    Recent accomplishments in buildings energy research by the diverse groups in the Energy Efficient Buildings Program at Lawrence Berkeley Laboratory (LBL) are summarized. We review technological progress in the areas of ventilation and indoor air quality, buildings energy performance, computer modeling, windows, and artificial lighting. The need for actual consumption data to track accurately the improving energy efficiency of buildings is being addressed by the Buildings Energy Data (BED) Group at LBL. We summarize results to date from our Building Energy Use Compilation and Analysis (BECA) studies, which include time trends in the energy consumption of new commercial and new residential buildings, the measured savings being attained by both commercial and residential retrofits, and the cost-effectiveness of buildings energy conservation measures. We also examine recent comparisons of predicted vs. actual energy usage/savings, and present the case for building energy use labels.

  9. Energy Efficiency Portfolio Standard

    Broader source: Energy.gov [DOE]

    On December 2015, the NY PSC issued an order extending the Energy Efficiency Portfolio Standard (EEPS) and Customer-Sited Tier (CST) of the Renewable Portfolio Standard (RPS) till Feb 29, 2016...

  10. Energy Conservation Program: Energy Conservation Standards for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Conservation Standards for Ceiling Fans Energy Conservation Program: Energy Conservation Standards for Ceiling Fans Energy Conservation Standards for Ceiling Fans PDF icon ...

  11. Building Energy Simulation & Modeling | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Simulation & Modeling Building Energy Simulation & Modeling Lead Performer: Lawrence ... Development (CBERD) conducts energy efficiency research and development with a focus ...

  12. Renewable Energy Portfolio Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    Maryland's Renewable Energy Portfolio Standard, enacted in May 2004 and revised numerous times since, requires electricity suppliers (all utilities and competitive retail suppliers) to use renewa...

  13. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    In 2007, Minnesota legislation modified the state's 2001 voluntary renewable energy objective to create a mandatory renewable portfolio standard (RPS). Public utilities (i.e., investor-owned...

  14. Alternative Energy Portfolio Standard

    Broader source: Energy.gov [DOE]

    NOTE: On February 2016, the PA Public Service Commission (PUC) issued a final rulemaking order amending and clarifying several provisions of PA Alternative Energy Portfolio Standard (AEPS), net...

  15. Residential Building Energy Analysis

    Energy Science and Technology Software Center (OSTI)

    1990-09-01

    PEAR (Program for Energy Analysis of Residences) provides an easy-to-use and accurate method of estimating the energy and cost savings associated with various energy conservation measures in site-built single-family homes. Measures such as ceiling, wall, and floor insulation; different window type and glazing layers; infiltration levels; and equipment efficiency can be considered. PEAR also allows the user to consider the effects of roof and wall color, movable night insulation on the windows, reflective and heatmore » absorbing glass, an attached sunspace, and use of a night temperature setback. Regression techniques permit adjustments for different building geometries, window areas and orientations, wall construction, and extension of the data to 880 U.S. locations determined by climate parameters. Based on annual energy savings, user-specified costs of conservation measures, fuel, lifetime of measure, loan period, and fuel escalation and interest rates, PEAR calculates two economic indicators; the Simple Payback Period (SPP) and the Savings-to-Investment Ratio (SIR). Energy and cost savings of different sets of conservation measures can be compared in a single run. The program can be used both as a research tool by energy policy analysts and as a method for nontechnical energy calculation by architects, home builders, home owners, and others in the building industry.« less

  16. Energy Simulator Residential Buildings

    Energy Science and Technology Software Center (OSTI)

    1992-02-24

    SERI-RES performs thermal energy analysis of residential or small commercial buildings and has the capability of modeling passive solar equipment such as rock beds, trombe walls, and phase change material. The analysis is accomplished by simulation. A thermal model of the building is created by the user and translated into mathematical form by the program. The mathematical equations are solved repeatedly at time intervals of one hour or less for the period of simulation. Themore » mathematical representation of the building is a thermal network with nonlinear, temperature-dependent controls. A combination of forward finite differences, Jacobian iteration, and constrained optimization techniques is used to obtain a solution. An auxiliary interactive editing program, EDITOR, is included for creating building descriptions. EDITOR checks the validity of the input data and also provides facilities for storing and referencing several types of building description files. Some of the data files used by SERI-RES need to be implemented as direct-access files. Programs are included to convert sequential files to direct-access files and vice versa.« less

  17. Green Building Standards for State Facilities

    Broader source: Energy.gov [DOE]

    Title 22 of the Arkansas Code includes Arkansas-specific provisions for LEED and Green Globes certification. These rating systems add to the state building energy code established in 2004 for New...

  18. Solar Design Standards for State Buildings

    Broader source: Energy.gov [DOE]

    From 2010 to 2012, solar photovoltaic systems have been installed at seven state government facilities, providing an estimated 650 kW of power. In one building, a 50 kW system has reduced energy ...

  19. Sustainable Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Sustainable Buildings Xeriscaping at Natural Plant Education Garden Xeriscaping at Natural Plant Education Garden Weldon Spring, Missouri, Site Read more Photovoltaic Solar Panels on LM Office Building Photovoltaic Solar Panels on LM Office Building Grand Junction, Colorado, Site Read more Fernald Preserve Visitors Center Fernald Preserve Visitors Center First Leadership in Energy & Environmental Design Platinum Certified Building in Ohio (September 2008). Fernald

  20. Renewable Energy Standard

    Office of Energy Efficiency and Renewable Energy (EERE)

    Notes: In July 2015, the Tenth Circuit Court of Appeals upheld the constitutionality Colorado's renewable energy standard (Energy & Environment Legal, et al v. Epel, et al, case number 14-1216). 

  1. Energy Efficiency Resource Standard

    Broader source: Energy.gov [DOE]

    In 2008, New Mexico enacted H.B. 305, the Efficient Use of Energy Act, which created an Energy Efficiency Resource Standard (EERS) for New Mexico’s electric utilities, and a requirement that all ...

  2. Resolving Code and Standard Barriers to Building America Innovations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resolving Code and Standard Barriers to Building America Innovations - 2014 BTO Peer Review Resolving Code and Standard Barriers to Building America Innovations - 2014 BTO Peer ...

  3. Energy Information Administration (EIA)- Commercial Buildings Energy

    U.S. Energy Information Administration (EIA) Indexed Site

    Consumption Survey (CBECS) Data 2 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics Data from the 1992 Commercial Buildings Energy Consumption Survey (CBECS) are presented in three groups of detailed tables: Buildings characteristics tables-number of buildings and amount of floorspace for major building characteristics. Energy consumption and expenditures tables-energy

  4. Energy Information Administration (EIA)- Commercial Buildings Energy

    Gasoline and Diesel Fuel Update (EIA)

    Consumption Survey (CBECS) Data 2 CBECS Survey Data 2012 | 2003 | 1999 | 1995 | 1992 | Previous Building Characteristics Consumption & Expenditures Microdata Methodology Building Characteristics Data from the 1992 Commercial Buildings Energy Consumption Survey (CBECS) are presented in three groups of detailed tables: Buildings characteristics tables-number of buildings and amount of floorspace for major building characteristics. Energy consumption and expenditures tables-energy

  5. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    Contact Us Users of the Buildings Energy Data Book are encouraged to comment on errors, omissions, emphases, and organization of this report to one of the persons listed below. Requests for additional complementary copies of this report, additional data, or information on an existing table should be referred to Jordan Kelso of D&R International, using the feedback form on this page. First Name: Last Name: Organization: Email Address: Message: Submit Editor: Jordan D. Kelso D&R

  6. Building Energy Codes Program | Department of Energy

    Office of Environmental Management (EM)

    The Building Technologies Office (BTO) supports greater adoption of residential and commercial building energy codes through collaborative efforts with local governments and ...

  7. Building Energy Codes Program Overview - 2014 BTO Peer Review...

    Energy Savers [EERE]

    Building Energy Codes Fact Sheet DOE Codes Program Overview - 2015 Peer Review 2014-05-08 Issuance: Energy Efficiency Improvements in ANSIASHRAEIES Standard 90.1-2013; ...

  8. Energy Department Announces Building Energy Efficiency Investments...

    Office of Environmental Management (EM)

    Building Energy Efficiency Investments in Twenty-Two States Energy Department Announces Building Energy Efficiency Investments in Twenty-Two States June 27, 2012 - 6:55pm Addthis ...

  9. Building Energy Code | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Type Building Energy Code Summary Much of the information presented in this summary is drawn from the U.S. Department of Energy's (DOE) Building Energy Codes Program ...

  10. Building Energy Efficiency in Rural China

    SciTech Connect (OSTI)

    Evans, Meredydd; Yu, Sha; Song, Bo; Deng, Qinqin; Liu, Jing; Delgado, Alison

    2014-04-01

    Rural buildings in China now account for more than half of Chinas total building energy use. Forty percent of the floorspace in China is in rural villages and towns. Most of these buildings are very energy inefficient, and may struggle to meet basic needs. They are cold in the winter, and often experience indoor air pollution from fuel use. The Chinese government plans to adopt a voluntary building energy code, or design standard, for rural homes. The goal is to build on Chinas success with codes in urban areas to improve efficiency and comfort in rural homes. The Chinese government recognizes rural buildings represent a major opportunity for improving national building energy efficiency. The challenges of rural China are also greater than those of urban areas in many ways because of the limited local capacity and low income levels. The Chinese government wants to expand on new programs to subsidize energy efficiency improvements in rural homes to build capacity for larger-scale improvement. This article summarizes the trends and status of rural building energy use in China. It then provides an overview of the new rural building design standard, and describes options and issues to move forward with implementation.

  11. Building Energy Use Benchmarking | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Use Benchmarking Building Energy Use Benchmarking Benchmarking is the practice of comparing the measured performance of a device, process, facility, or organization to itself, its peers, or established norms, with the goal of informing and motivating performance improvement. When applied to building energy use, benchmarking serves as a mechanism to measure energy performance of a single building over time, relative to other similar buildings, or to modeled simulations of a

  12. Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards Standards FOREWARD This U.S. Department of Energy (DOE) standard supersedes DOE-STD-3020-97 and is approved for use by DOE and its contractors. This standard was developed primarily for application in DOE programs. It provides guidance to DOE contractors for procurement and required testing of High Efficiency Particulate Air (HEPA) filters used in DOE nuclear facilities. Required testing is performed by the filter manufacturer and by DOE at a designated Filter Test Facility (FTF). This

  13. Buildings Energy Data Book | Open Energy Information

    Open Energy Info (EERE)

    Energy Data Book AgencyCompany Organization: United States Department of Energy Sector: Energy Focus Area: Buildings Topics: Market analysis, Pathways analysis, Technology...

  14. Enhancements to ASHRAE Standard 90.1 Prototype Building Models

    SciTech Connect (OSTI)

    Goel, Supriya; Athalye, Rahul A.; Wang, Weimin; Zhang, Jian; Rosenberg, Michael I.; Xie, YuLong; Hart, Philip R.; Mendon, Vrushali V.

    2014-04-16

    This report focuses on enhancements to prototype building models used to determine the energy impact of various versions of ANSI/ASHRAE/IES Standard 90.1. Since the last publication of the prototype building models, PNNL has made numerous enhancements to the original prototype models compliant with the 2004, 2007, and 2010 editions of Standard 90.1. Those enhancements are described here and were made for several reasons: (1) to change or improve prototype design assumptions; (2) to improve the simulation accuracy; (3) to improve the simulation infrastructure; and (4) to add additional detail to the models needed to capture certain energy impacts from Standard 90.1 improvements. These enhancements impact simulated prototype energy use, and consequently impact the savings estimated from edition to edition of Standard 90.1.

  15. NEEP Building Energy Codes Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    * Markets value and prioritize energy efficiency - Rating and Disclosure ( VT, Cambridge, MA) * Robust & qualified building energy code work force: DE, RI, MA, MD, NY * ...

  16. Energy Efficient State Building Initiative

    Broader source: Energy.gov [DOE]

    The DOA has incorporated the requirements of the Executive Order into Indiana's standard instructions to designers for projects on state-owned buildings. Efficiency can be demonstrated through...

  17. Buildings Energy Data Book

    Buildings Energy Data Book [EERE]

    2.1 Residential Sector Energy Consumption 2.2 Residential Sector Characteristics 2.3 Residential Sector Expenditures 2.4 Residential Environmental Data 2.5 Residential Construction and Housing Market 2.6 Residential Home Improvements 2.7 Multi-Family Housing 2.8 Industrialized Housing 2.9 Low-Income Housing 3Commercial Sector 4Federal Sector 5Envelope and Equipment 6Energy Supply 7Laws, Energy Codes, and Standards 8Water 9Market Transformation Glossary Acronyms and Initialisms Technology

  18. Energy 101: Energy Efficient Commercial Buildings

    ScienceCinema (OSTI)

    None

    2014-06-26

    Learn how commercial buildings can incorporate whole-building design to save energy and money while enhancing performance and comfort. This video highlights several energy-saving features of the Research Support Facility at the Energy Department's National Renewable Energy Laboratory-a model for high-performance office building design.

  19. Energy 101: Energy Efficient Commercial Buildings

    SciTech Connect (OSTI)

    2014-03-14

    Learn how commercial buildings can incorporate whole-building design to save energy and money while enhancing performance and comfort. This video highlights several energy-saving features of the Research Support Facility at the Energy Department's National Renewable Energy Laboratory-a model for high-performance office building design.

  20. Building Energy Asset Score: State and Local Governments | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy State and Local Governments Building Energy Asset Score: State and Local Governments The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies opportunities for users to invest in energy efficiency upgrades. It is web-based

  1. Commercial Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Science & Innovation » Energy Efficiency » Commercial Buildings Commercial Buildings At an estimated cost of $38 billion a year, lighting represents the largest source of electricity consumption in U.S. commercial buildings. A new breakthrough by the Energy Department's <a href="/node/712411">National Renewable Energy Lab</a> could help commercial buildings save on lighting and ventilation costs by improving the accuracy of motion detection. At an estimated cost of

  2. BuildingSync® Schema for Energy Audit Data | Buildings | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BuildingSync® Schema for Energy Audit Data BuildingSync® is a standardized language for commercial building energy audit data that software developers can use to exchange data between audit tools. For information on BuildingSync, please visit https://buildingsync.net

  3. Proposed residential building standards: draft environmental impact report

    SciTech Connect (OSTI)

    Not Available

    1981-03-01

    The Warren-Alquist Act of 1974 requires the California Energy Commission to adopt and periodically update energy-conservation standards for new residential buildings. The Act also requires the CEC to adopt performance standards for new buildings. With increased energy costs, the CEC staff proposed to update the current energy-conservation standards and they are a hybrid of performance and prescriptive requirements. The proposed standards do not cover hotels, motels, or buildings over 3 stories high. The purpose of an environmental impact report (EIR) is to provide public agencies and the public in general with detailed information about the effects a proposed project is likely to have on the environment, to list ways in which the significant effects of such a project might be minimized, and to indicate alternatives to the project. The contents of this Draft EIR includes: a project description; a description of the environmental setting, impacts, and mitigation measures; a discussion of alternatives; and an indication of growth-inducing impacts. The Draft EIR discusses both environmental and socio-economic impacts of the proposed standards compared to both the current standards and the pre-1975 practices. (MCW)

  4. Building Energy Assessment Toolkit | Open Energy Information

    Open Energy Info (EERE)

    Opportunities 3b.1. Assess technical potential for sector technologies Renewable Energy Technical Potential Toolkit Building Energy Assessment Toolkit Power System Screening...

  5. Funding Opportunity Coming Soon: Buildings Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Opportunity Coming Soon: Buildings Energy Efficiency Frontiers & Innovation Technologies (BENEFIT) 2016 Funding Opportunity Coming Soon: Buildings Energy Efficiency Frontiers & ...

  6. Better Buildings Residential | Department of Energy

    Office of Environmental Management (EM)

    Better Buildings Residential Better Buildings Residential Solution Center Shares Energy Efficiency Program Strategies Solution Center Shares Energy Efficiency Program Strategies ...

  7. EnergyPlus: Energy Simulation Software for Buildings - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Energy Analysis Energy Analysis Building Energy Efficiency Building Energy Efficiency Find More Like This Return to Search EnergyPlus: Energy Simulation Software for Buildings Lawrence Berkeley National Laboratory Contact LBL About This Technology Computer rendering of the new federal building built in San Francisco. The building was designed with the aid of the EnergyPlus software distributed and partly developed by Berkeley Lab. Computer rendering of the new federal building built

  8. Standard Renewable Energy | Open Energy Information

    Open Energy Info (EERE)

    Energy Jump to: navigation, search Logo: Standard Renewable Energy Name: Standard Renewable Energy Address: 55 Waugh Drive, Suite 800 Place: Houston, Texas Zip: 77007 Region: Texas...

  9. BETTER BUILDINGS ALLIANCE | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BETTER BUILDINGS ALLIANCE BETTER BUILDINGS ALLIANCE Intra-organization Energy Efficiency Competitions Intra-organization Energy Efficiency Competitions Join Better Buildings ...

  10. Commercial Reference Buildings | Open Energy Information

    Open Energy Info (EERE)

    Reference Building Types1 , which represent approximately 70% of the commercial buildings in the U.S. 2. Whole building energy analysis data (developed using EnergyPlus...

  11. Energy Department Issues Green Building Certification System...

    Energy Savers [EERE]

    Green Building Certification System Final Rule to Support Increased Energy Measurement and Efficient Building Design Energy Department Issues Green Building Certification System ...

  12. Buildings Energy Data Book: 4.4 Legislation Affecting Energy Consumption of Federal Buildings and Facilities

    Buildings Energy Data Book [EERE]

    3 Energy Independence and Security Act of 2007, Provisions Affecting Energy Consumption in Federal Buildings Source(s): Standard Relating to Solar Hot Water - Requires new Federal buildings, or Federal buildings undergoing major renovations, to meet at least 30 percent of hot water demand through the use of solar hot water heaters, if cost-effective. [Section 523] Federally-Procured Appliances with Standby Power - Requires all Federal agencies to procure appliances with standby power consumption

  13. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Kentucky Building Code (KBC) is updated every three years on a cycle one year behind the publication year for the International Building Code. Any changes to the code by the state of Kentucky...

  14. Building Energy Code

    Broader source: Energy.gov [DOE]

    Prior to 1997, South Carolina's local governments adopted and enforced the building codes. In 1997, the law required statewide use of the most up-to-date building codes, which then required the...

  15. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Florida Building Commission (FBC) is directed to adopt, revise, update, and maintain the Florida Building Code in accordance with Chapter 120 of the state statutes. The code is mandatory...

  16. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Virginia Uniform Statewide Building Code (USBC) is a statewide minimum requirement that local jurisdictions cannot amend. The code is applicable to all new buildings in the commonwealth. The...

  17. Building Energy Code

    Broader source: Energy.gov [DOE]

    The 2012 IECC is in effect for all residential and commercial buildings, Idaho schools, and Idaho jurisdictions that adopt and enforce building codes, unless a local code exists that is more...

  18. Residential Buildings Integration | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Buildings Integration Residential Buildings Integration Zero Energy Ready Home Zero Energy Ready Home Zero Energy Ready Homes are so efficient that a renewable energy ...

  19. Energy Efficiency Resource Standard | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    including standards for energy supply diversification, distributed generation, demand response, and "prudent and reliable" energy efficiency and energy conservation...

  20. EA-2020: Energy Efficiency Standards for New Federal Low-Rise...

    Office of Environmental Management (EM)

    0: Energy Efficiency Standards for New Federal Low-Rise Residential Buildings' Baseline Standards Update (RIN 1904-AD56) EA-2020: Energy Efficiency Standards for New Federal...

  1. Building Energy Asset Score: Utilities and Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Utilities and Energy Efficiency Program Administrators Building Energy Asset Score: ... and structural energy efficiency of commercial and multifamily residential buildings. ...

  2. Business Energy Efficiency Rebate for Existing Buildings | Department...

    Broader source: Energy.gov (indexed) [DOE]

    institutional customers of any of the state's investor owned utilities to increase the energy efficiency of their existing buildings. The standard incentive program provides...

  3. Healthy Zero Energy Buildings (HZEB) Program - Cross-Sectional...

    Office of Scientific and Technical Information (OSTI)

    development of new, science-based commercial building ventilation rate standards that balance the dual objectives of increasing energy efficiency and maintaining acceptable indoor...

  4. Energy 101: Energy Efficient Commercial Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficient Commercial Buildings Energy 101: Energy Efficient Commercial Buildings Addthis Description Learn how commercial buildings can incorporate whole-building design to save energy and money while enhancing performance and comfort. This video highlights several energy-saving features of the Research Support Facility at the Energy Department's National Renewable Energy Laboratory-a model for high-performance office building design. Text Version Below is the text version for the Energy

  5. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    NOTE: H.B. 7413 enacted on June 2016 extends the state Renewable Energy Standard (RES) to 2035, which was previously set to expire at the end of 2019. The RES is set to increase by 1.5% annually,...

  6. NREL Buildings and Energy Efficiency Program | Open Energy Information

    Open Energy Info (EERE)

    NREL Buildings and Energy Efficiency Program (Redirected from Buildings Energy Efficiency Capabilities at NREL) Jump to: navigation, search Logo: Buildings Energy Efficiency...

  7. NREL Buildings and Energy Efficiency Program | Open Energy Information

    Open Energy Info (EERE)

    NREL Buildings and Energy Efficiency Program Jump to: navigation, search Logo: Buildings Energy Efficiency Program at NREL Name Buildings Energy Efficiency Program at NREL Agency...

  8. Saving Energy in Multifamily Buildings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Saving Energy in Multifamily Buildings Saving Energy in Multifamily Buildings This presentation is for the Building Technologies program webinar titled Saving Energy in Multifamily ...

  9. Building Energy Modeling (BEM) Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Modeling (BEM) Overview 2014 Building Technologies Office Peer Review Amir Roth, Ph.D. amir.roth@ee.doe.gov BEM is a Fundamental Energy-Efficiency Technology BEM calculates ...

  10. Building Energy Asset Score

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... building user base in EE services, engineering, design, and ... before expanding use types. * Invest in lateral ... Market Impact and Recognition: 21 organizations committed to ...