National Library of Energy BETA

Sample records for building electricity dsm

  1. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    SciTech Connect (OSTI)

    McNeil, MIchael; Letschert, Virginie; Shen, Bo; Sathaye, Jayant; de la Ru du Can, Stephane

    2011-01-12

    The global economy has grown rapidly over the past decade with a commensurate growth in the demand for electricity services that has increased a country's vulnerability to energy supply disruptions. Increasing need of reliable and affordable electricity supply is a challenge which is before every Asia Pacific Partnership (APP) country. Collaboration between APP members has been extremely fruitful in identifying potential efficiency upgrades and implementing clean technology in the supply side of the power sector as well established the beginnings of collaboration. However, significantly more effort needs to be focused on demand side potential in each country. Demand side management or DSM in this case is a policy measure that promotes energy efficiency as an alternative to increasing electricity supply. It uses financial or other incentives to slow demand growth on condition that the incremental cost needed is less than the cost of increasing supply. Such DSM measures provide an alternative to building power supply capacity The type of financial incentives comprise of rebates (subsidies), tax exemptions, reduced interest loans, etc. Other approaches include the utilization of a cap and trade scheme to foster energy efficiency projects by creating a market where savings are valued. Under this scheme, greenhouse gas (GHG) emissions associated with the production of electricity are capped and electricity retailers are required to meet the target partially or entirely through energy efficiency activities. Implementation of DSM projects is very much in the early stages in several of the APP countries or localized to a regional part of the country. The purpose of this project is to review the different types of DSM programs experienced by APP countries and to estimate the overall future potential for cost-effective demand-side efficiency improvements in buildings sectors in the 7 APP countries through the year 2030. Overall, the savings potential is estimated to be 1.7 thousand TWh or 21percent of the 2030 projected base case electricity demand. Electricity savings potential ranges from a high of 38percent in India to a low of 9percent in Korea for the two sectors. Lighting, fans, and TV sets and lighting and refrigeration are the largest contributors to residential and commercial electricity savings respectively. This work presents a first estimates of the savings potential of DSM programs in APP countries. While the resulting estimates are based on detailed end-use data, it is worth keeping in mind that more work is needed to overcome limitation in data at this time of the project.

  2. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    the electricity demand forecast, and the energy and CO 2Base Case Scenario Energy demand through 2030 is forecast byforecast of electricity demand in the buildings sector developed by LBNL, called the Bottom-up Energy

  3. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    Barriers to Utility Demand-Side Management in Canada”,and Policy Can Deliver Demand-Side Management Benefits to aEnergy Group, 2005. “Demand-Side Management (DSM) in the

  4. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    Developments in Electricity Demand Management – Lessons24 Table 4. Electricity Demand Projections, Energy and3. APP Base Case Electricity Demand Forecast –Residential

  5. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    Washing Machines Televisions Space Cooling Electric Waterheaters 16 Electric toilet seats 17 Vending machines (alsoMachines Dish Washers Dish Driers Rice Cookers Vacuum Cleaners Electric

  6. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    owned integrated hydro electricity utilities prevail,s Loading Order for Electricity Resources”, Staff Report,International Developments in Electricity Demand Management

  7. Electric Utility Industrial DSM and M&V Program

    E-Print Network [OSTI]

    Lau, K. P. K.

    2008-01-01

    BC Hydro is an electric utility with a service area covering over 95% of the province of British Columbia in Canada. Power Smart is BC Hydros demand-side-management (DSM) division. Power Smart develops, operates and manages various DSM programs...

  8. Electric-utility DSM programs: Terminology and reporting formats

    SciTech Connect (OSTI)

    Hirst, E. ); Sabo, C. )

    1991-10-01

    The number, scope, effects, and costs of electric-utility demand-site management programs are growing rapidly in the United States. Utilities, their regulators, and energy policy makers need reliable information on the costs of, participation in, and energy and load effects of these programs to make informed decisions. In particular, information is needed on the ability of these programs to cost-effectively provide energy and capacity resources that are alternatives to power plants. This handbook addresses the need for additional and better information in two ways. First, it discusses the key concepts associated with DSM-program types, participation, energy and load effects, and costs. Second, the handbook offers definitions and a sample reporting form for utility DSM programs. The primary purpose in developing these definitions and this form is to encourage consistency in the collection and reporting of data on DSM programs. To ensure that the discussions, reporting formats, and definitions will be useful and used, development of this handbook was managed by a committee, with membership from electric utilities, state regulatory commissions, and the US Department of Energy. Also, this data-collection form was pretested by seven people from six utilities, who completed the form for nine DSM programs.

  9. Financial comparison of time-of-use pricing with technical DSM programs and generating plants as electric-utility resource options

    SciTech Connect (OSTI)

    Hill, L.J.

    1994-04-01

    Changing electricity prices to more closely reflect production costs has a significant impact on the consumption of electricity. It is known, for example, that most of the efficiency gains in the electric power sectors of the industrialized world since the first international oil price shock in 1973 are attributable to the rising trend of electricity prices. This was due to the rising average price of electricity. Because of the unique characteristics of producing electricity, its marginal cost is higher than its average cost during many hours of the day. This study shows that, for utilities not reflecting these cost differences in their rates, there is ample room to satisfy a portion of their resource needs by exploiting the load-shaping properties of time-of-use (TOU) rates. Satisfying a portion of resource requirements by implementing a TOU-pricing program, however, is not costless. Metering and administering TOU pricing requires a financial commitment by an electric utility. And the commitment has an opportunity cost. That is, the funds could be used to construct generating plants or run DSM programs (other than a TOU-pricing program) and satisfy the same resource needs that TOU pricing does. The question addressed in this study is whether a utility is better-served financially by (i) implementing TOU pricing or (ii) running technical DSM programs and building power plants. The answer is that TOU pricing compares favorably on a financial basis with other resources under a wide set of conditions that real-world utilities confront.

  10. Hawaii demand-side management resource assessment. Final report: DSM opportunity report

    SciTech Connect (OSTI)

    1995-08-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. 10 figs., 55 tabs.

  11. Advanced Residential Buildings Research; Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-09-01

    Factsheet describing the Advanced Residential Buildings Research group within NREL's Electricity, Resources, and Buildings Systems Integration Center.

  12. Advanced Commercial Buildings Research; Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-09-01

    Factsheet describing the Advanced Commercial Buildings Research group within NREL's Electricity, Resources, and Buildings Systems Integration Center.

  13. Hawaii demand-side management resource assessment. Final report, Reference Volume 3 -- Residential and commercial sector DSM analyses: Detailed results from the DBEDT DSM assessment model; Part 1, Technical potential

    SciTech Connect (OSTI)

    1995-04-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. Numerous tables and figures illustrating the technical potential for demand-side management are included.

  14. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    Induction) Mandatory 2006 Voluntary Label In progress In progress Ceiling fans Compact Fluorescent Lamps (CFL) Agricultural pump LPG stove

  15. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    2008. “NSW Energy Efficiency Trading Scheme Discussionunder the NSW energy efficiency trading scheme (NEET, Newtrading schemes that encourage utilities to develop energy

  16. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    level under the form of rebate, interest-free loan and salesbec Household Appliance Rebate — ENERGY STAR® qualifiedreplacement Cool Savings Rebate - Ontario Power Authority

  17. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    Government, 2009. “Smart Energy Policy”. informationexample, in Queensland, the smart energy savings fund (AUD $

  18. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    Home heating/cooling system purchase/replacement Cool Savings Rebate - Ontario Power Authority Source:

  19. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    E-Print Network [OSTI]

    McNeil, MIchael

    2011-01-01

    the government of India to promote energy efficiency acrossin India: current issues and prospects”, Energy Policy,Zhao 2005. India Standards and Labeling Programs The Energy

  20. Do diminishing marginal returns apply to DSM?

    SciTech Connect (OSTI)

    Sioshansi, F.P.

    1994-05-01

    The U.S. electric power industry is currently spending approximately $2 billion annually on demand-side management (DSM) programs, a substantial increase over just a few years ago. The level of DSM spending is expected to continue to grow in the foreseeable future, according to various industry surveys. Environmental benefits are among the chief assumed - and expected - benefits of DSM. In fact, the answer to how much cost-effective and achievable DSM is available depends, to some extent, on whether the value of environmental benefits of DSM is considered explicitly or implicitly. Several states now specifically require the environmental effect of alternative supply or demand options to be considered in utility resource-planning decisions. On the surface, it seems plausible that, assuming the current level of DSM is `good` for the environment, an even more aggressive level of DSM would be even better. Carrying this line of argument a step further would suggest that a highly aggressive DSM strategy, coupled with a heavy dose of nonpolluting renewable energy technologies, would eliminate the need for all new supply-side resources and be the closest thing to achieving nirvana - low-cost, environmentally benign electricity service - in utility resource planning. Those advocating such a strategy argue that is is not only justified from an environmental point of view, but also from an economic perspective, because it is the cheapest course of action to follow.

  1. Smart buildings with electric vehicle interconnection as buffer for local renewables?

    E-Print Network [OSTI]

    Stadler, Michael

    2012-01-01

    N ATIONAL L ABORATORY Smart buildings with electric vehicleopportunity employer. Smart buildings with electric vehicleand integrated in smart buildings Is it that simple or does

  2. Electric Storage in California's Commercial Buildings

    E-Print Network [OSTI]

    Stadler, Michael

    2014-01-01

    Effect of Heat and Electricity Storage and Reliability onNM, USA. [37] Electricity Storage Association, Morgan Hill,dimensionless d. electricity storage loss factor for the EV

  3. Markovian Models for Electrical Load Prediction in Smart Buildings

    E-Print Network [OSTI]

    California at Santa Barbara, University of

    Markovian Models for Electrical Load Prediction in Smart Buildings Muhammad Kumail Haider, Asad,13100004,ihsan.qazi}@lums.edu.pk Abstract. Developing energy consumption models for smart buildings is important develop parsimo- nious Markovian models of smart buildings for different periods in a day for predicting

  4. Extracting Operating Modes from Building Electrical Load Data: Preprint

    SciTech Connect (OSTI)

    Frank, S.; Polese, L. G.; Rader, E.; Sheppy, M.; Smith, J.

    2012-01-01

    Empirical techniques for characterizing electrical energy use now play a key role in reducing electricity consumption, particularly miscellaneous electrical loads, in buildings. Identifying device operating modes (mode extraction) creates a better understanding of both device and system behaviors. Using clustering to extract operating modes from electrical load data can provide valuable insights into device behavior and identify opportunities for energy savings. We present a fast and effective heuristic clustering method to identify and extract operating modes in electrical load data.

  5. Building

    U.S. Energy Information Administration (EIA) Indexed Site

    DIV. Electricity Consumption and Expenditure Intensities by Census Division, 1999" ,"Electricity Consumption",,,"Electricity Expenditures" ,"per Building (thousand kWh)","per...

  6. Energy efficiency indicators for high electric-load buildings

    SciTech Connect (OSTI)

    Aebischer, Bernard; Balmer, Markus A.; Kinney, Satkartar; Le Strat, Pascale; Shibata, Yoshiaki; Varone, Frederic

    2003-06-01

    Energy per unit of floor area is not an adequate indicator for energy efficiency in high electric-load buildings. For two activities, restaurants and computer centres, alternative indicators for energy efficiency are discussed.

  7. Electric Storage in California's Commercial Buildings

    E-Print Network [OSTI]

    Stadler, Michael

    2014-01-01

    2010, Special Issue on Microgrids and Energy Management,and Operation of Microgrids in Commercial Buildings, IEEEIravani, and C. Marnay, Microgrids, An Overview of Ongoing

  8. Electric Storage in California's Commercial Buildings

    E-Print Network [OSTI]

    Stadler, Michael

    2014-01-01

    Battery, Hybrid and Fuel Cell Electric Vehicle Symposium &progress in batteries, fuel cells, and hydrogen storage foronsite energy production (e.g. fuel cells, PV) at different

  9. Insuring Electric Power for Critical Services After Disasters with Building-Sited Electric Generating Technologies

    E-Print Network [OSTI]

    Jackson, J.

    2006-01-01

    -sited combined heat and power (CHP) electric generation technologies. This paper evaluates the physical requirements and costs of preemptively installing these new building- sited electric generation technologies to insure reliable long-term power for critical... source of emergency power available with new building-sited combined heat and power (CHP) electric generation technologies (see US Department of Energy, 2000 and 2002 for descriptions of these technologies). Instead of traditional emergency...

  10. Building Electricity Load Forecasting via Stacking Ensemble Learning Method with Moving Horizon Optimization

    E-Print Network [OSTI]

    Burger, Eric M.; Moura, Scott J.

    2015-01-01

    K. W. Yau, Predicting electricity energy con- sumption: Afor building-level electricity load forecasts, Energy andannealing algorithms in electricity load forecasting,

  11. Automatic CX Tool for Electrical Building

    E-Print Network [OSTI]

    Couillaud, N.; Jandon, M.; Viaud, B.; Clemoncon, B.

    2007-01-01

    programming The second example shown in this section is the hourly programming of lighting (Figure 9). This graph shows the coherence between the hourly programming of lighting implemented in BEMS (grey patched) and the real utilization of lighting (blue... of the building. Figure 9: Hourly programming of lighting system Heating hourly programming The third example details the hourly programming of heating (Figure 10). The grey-patched part corresponds to the minimum indoor temperature to reach implemented...

  12. Industrial DSM: Beyond High Efficiency Lights and Motors

    E-Print Network [OSTI]

    Appelbaum, B.

    1995-01-01

    Perhaps the greatest challenge to electric utilities is the design and implementation of demand side management (DSM) programs targeted to their industrial customers. In focussing on promotion of high efficiency lighting ...

  13. Modeling Distributed Electricity Generation in the NEMS Buildings Models

    Reports and Publications (EIA)

    2011-01-01

    This paper presents the modeling methodology, projected market penetration, and impact of distributed generation with respect to offsetting future electricity needs and carbon dioxide emissions in the residential and commercial buildings sector in the Annual Energy Outlook 2000 (AEO2000) reference case.

  14. Greenhouse Gas Emissions from Building and Operating Electric

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Greenhouse Gas Emissions from Building and Operating Electric Power Plants in the Upper Colorado capacity by 39% but resulted in a mere 1% of the CO2 emissions from the initial construction and came with no additional emissions from the reservoir, which accounts for the majority of the GWE. Introduction In2001

  15. Thermal Systems Group; Electricity, Resources, & Building Systems Integration (ERBSI) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-11-01

    Factsheet developed to describe the activites of the Thermal Systems Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

  16. Non-Intrusive Electric Load Monitoring in Commercial Buildings

    E-Print Network [OSTI]

    Norford, L. K.; Mabey, N.

    1992-01-01

    W'S) Figure 2. Electric power at the building HVAC service entrance, July 23, 1991. A chiller and associated pumps were turned on at 7 am. To quantify the resolution that can be obtained with a 5 kW standard deviation, we apply statistics appropriate..., heuristic identification Table 3 Changes in electrical power due to turning fans on and off, as determined by application of three different filters. Summary statistics are for the first two trials, which involved the same fan. Trial 1 2 3 Average...

  17. Evolutionary Tuning of Building Models to Monthly Electrical Consumption

    SciTech Connect (OSTI)

    Garrett, Aaron [Jacksonville State University] [Jacksonville State University; New, Joshua Ryan [ORNL] [ORNL; Chandler, Theodore [Jacksonville State University] [Jacksonville State University

    2013-01-01

    Building energy models of existing buildings are unreliable unless calibrated so they correlate well with actual energy usage. Calibrating models is costly because it is currently an art which requires significant manual effort by an experienced and skilled professional. An automated methodology could significantly decrease this cost and facilitate greater adoption of energy simulation capabilities into the marketplace. The Autotune project is a novel methodology which leverages supercomputing, large databases of simulation data, and machine learning to allow automatic calibration of simulations to match measured experimental data on commodity hardware. This paper shares initial results from the automated methodology applied to the calibration of building energy models (BEM) for EnergyPlus (E+) to reproduce measured monthly electrical data.

  18. THE ROLE OF BUILDING TECHNOLOGIES IN REDUCING AND CONTROLLING PEAK ELECTRICITY DEMAND

    E-Print Network [OSTI]

    LBNL-49947 THE ROLE OF BUILDING TECHNOLOGIES IN REDUCING AND CONTROLLING PEAK ELECTRICITY DEMAND? ..................................... 8 What are the seasonal aspects of electric peak demand?............................ 9 What because of the California electricity crisis (Borenstein 2001). Uncertainties surrounding the reliability

  19. Using Electricity",,,"Electricity Consumption",,,"Electricity...

    U.S. Energy Information Administration (EIA) Indexed Site

    . Total Electricity Consumption and Expenditures, 2003" ,"All Buildings* Using Electricity",,,"Electricity Consumption",,,"Electricity Expenditures" ,"Number of Buildings...

  20. Positioning the electric utility to build information infrastructure

    SciTech Connect (OSTI)

    Not Available

    1994-11-01

    In two particular respects (briefly investigated in this study from a lawyer`s perspective), electric utilities appear uniquely well-positioned to contribute to the National Information Infrastructure (NII). First of all, utilities have legal powers derived from their charters and operating authorities, confirmed in their rights-of-way, to carry out activities and functions necessary for delivering electric service. These activities and functions include building telecommunications facilities and undertaking information services that have become essential to managing electricity demand and supply. The economic value of the efficiencies made possible by telecommunications and information could be substantial. How great remains to be established, but by many estimates electric utility applications could fund a significant share of the capital costs of building the NII. Though utilities` legal powers to pursue such efficiencies through telecommunications and information appear beyond dispute, it is likely that the effort to do so will produce substantial excess capacity. Who will benefit from this excess capacity is a potentially contentious political question that demands early resolution. Will this windfall go to the utility, the customer, or no one (because of political paralysis), or will there be some equitable and practical split? A second aspect of inquiry here points to another contemporary issue of very great societal importance that could very well become the platform on which the first question can be resolved fortuitously-how to achieve universal telecommunications service. In the effort to fashion the NII that will now continue, ways and means to maximize the unique potential contribution of electric utilities to meeting important social and economic needs--in particular, universal service--merit priority attention.

  1. Analysis of electric vehicle interconnection with commercial building microgrids

    SciTech Connect (OSTI)

    Stadler, Michael; Mendes, Goncalo; Marnay, Chris; Mé gel, Olivier; Lai, Judy

    2011-04-01

    The outline of this presentation is: (1) global concept of microgrid and electric vehicle (EV) modeling; (2) Lawrence Berkeley National Laboratory's Distributed Energy Resources Customer Adoption Model (DER-CAM); (3) presentation summary - how does the number of EVs connected to the building change with different optimization goals (cost versus CO{sub 2}); (3) ongoing EV modeling for California: the California commercial end-use survey (CEUS) database, objective: 138 different typical building - EV connections and benefits; (4) detailed analysis for healthcare facility: optimal EV connection at a healthcare facility in southern California; and (5) conclusions. Conclusions are: (1) EV Charging/discharging pattern mainly depends on the objective of the building (cost versus CO{sub 2}); (2) performed optimization runs show that stationary batteries are more attractive than mobile storage when putting more focus on CO{sub 2} emissions. Why? Stationary storage is available 24 hours a day for energy management - more effective; (3) stationary storage will be charged by PV, mobile only marginally; (4) results will depend on the considered region and tariff - final work will show the results for 138 different buildings in nine different climate zones and three major utility service territories.

  2. Microgrids: An emerging paradigm for meeting building electricity and heat requirements efficiently and with appropriate energy quality

    E-Print Network [OSTI]

    Marnay, Chris; Firestone, Ryan

    2007-01-01

    in the Evolving Electricity Generation and Deliveryfor meeting building electricity and heat requirementswas funded by the Office of Electricity Delivery and Energy

  3. Public Opinions of Building Additional High-Voltage Electric Power Lines

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    Public Opinions of Building Additional High-Voltage Electric Power Lines A Report to the National-Voltage Electric Power Lines: A Report to the National Science Foundation and the Electric Power Research Center to build new power lines. Residents living in counties with planned routes for new transmission lines

  4. Building Work: Allocation of Contract for the Electric Sub-Station 18 kV, NPA Building, Technological Workshop and Lab. 13

    E-Print Network [OSTI]

    1963-01-01

    Building Work: Allocation of Contract for the Electric Sub-Station 18 kV, NPA Building, Technological Workshop and Lab. 13

  5. Electrical Energy Conservation and Peak Demand Reduction Potential for Buildings in Texas: Preliminary Results

    E-Print Network [OSTI]

    Hunn, B. D.; Baughman, M. L.; Silver, S. C.; Rosenfeld, A. H.; Akbari, H.

    1985-01-01

    This paper presents preliminary results of a study of electrical energy conservation and peak demand reduction potential for the building sector in Texas. Starting from 1980 building stocks and energy use characteristics, technical conservation...

  6. Evolutionary Tuning of Building Models to Monthly Electrical Consumption

    E-Print Network [OSTI]

    Wang, Xiaorui "Ray"

    . With buildings being the largest single sector of energy consumption, building efficiency is one of the fastest of energy efficiency for buildings is being able to realistically model specific building types; however

  7. Sub-metering to Electricity Use in Large-scale Commercial Buildings

    E-Print Network [OSTI]

    Yuan, W.

    2006-01-01

    -metering and statistics ???? Method to actualize sub-metering ???? Practice??Project example ???? Use of data??Analysis Software Sub-metering and statistics to electricity use in commercial buildings 3 Situation?? 4 types of large-scale commercial building Shopping mall... in commercial buildings ???? Significanceof sub-metering and statistics ???? Method to actualize sub-metering ???? Practice??Project example ???? Use of data??Analysis Software Sub-metering and statistics to electricity use in commercial buildings 8 Method...

  8. Transmission and Grid Integration: Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-09-01

    Factsheet developed to describe the activites of the Transmission and Grid Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

  9. Transmission and Grid Integration: Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    2009-09-01

    Factsheet developed to describe the activities of the Transmission and Grid Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

  10. RESCHEDULED: Webinar on Material Handling Fuel Cells for Building Electric Peak Shaving Applications

    Broader source: Energy.gov [DOE]

    The Fuel Cell Technologies Office will present a live webinar entitled "Material Handling Fuel Cells for Building Electric Peak Shaving Applications".

  11. Greater than the Sum of its Parts; Electricity, Resources, & Building Systems Integration (ERBSI) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-11-01

    NREL's Electricity, Resources, and Building Systems Integration Center brings together a diverse group of experts performing grid integration and optimization R&D activities.

  12. International DSM and DSM program evaluation: An INDEEP assessment

    SciTech Connect (OSTI)

    Vine, E.

    1995-04-01

    This paper discusses the current level of demand-side management (DSM) occurring in selected European countries and reviews the availability of information on DSM programs and program evaluation. Next, thirteen European DSM programs are compared by examining such factors as: motivations for program implementation, marketing methods, participation rates, total energy savings, and program costs. The transfer of DSM program results and experiences found in these case studies is also discussed, as well as the lessons learned during the design, implementation, and evaluation of these programs. This paper represents a preliminary assessment of the state of DSM and DSM program evaluation in Europe. The findings from this work also represent the first steps in a joint international effort to compile and analyze the measured results of energy efficiency programs in a consistent and comprehensive fashion. The authors find that these programs represent cost-effective resources: the cost of energy saved by the programs ranged from a low of 0.0005 ECUs/kWh (0.01 {cents}/kWh) to a high of 0.077 ECUs/kWh (9.7 {cents}/kWh), with an average cost of 0.027 ECUs/kWh (3.3 {cents}/kWh). Weighted by energy savings, the average cost of energy saved by the programs was 0.014 ECUs/kWh (1.8 {cents}/kWh).

  13. Minimizing Building Electricity Costs in a Dynamic Power Market: Algorithms and Impact on Energy Conservation

    E-Print Network [OSTI]

    Wang, Dan

    Minimizing Building Electricity Costs in a Dynamic Power Market: Algorithms and Impact on Energy of Computing, The Hong Kong Polytechnic University, Hong Kong, P. R. China 2 Department of Electrical and the electricity bills nowa- days are leading to unprecedented costs. Electricity price is market-based and dynamic

  14. Tariff-based analysis of commercial building electricity prices

    E-Print Network [OSTI]

    Coughlin, Katie M.; Bolduc, Chris A.; Rosenquist, Greg J.; Van Buskirk, Robert D.; McMahon, James E.

    2008-01-01

    4 Calculation of Electricity Prices 4.1 Averageaverage seasonal and annual electricity prices by region inbased annual average electricity price vs. annual energy

  15. BRENNAN --DSM UNDER COMPETITION: 1 Demand-Side Management Programs Under Retail

    E-Print Network [OSTI]

    California at Berkeley. University of

    BRENNAN -- DSM UNDER COMPETITION: 1 Demand-Side Management Programs Under Retail Electricity of California Berkeley, CA March 5, 1999 #12;BRENNAN -- DSM UNDER COMPETITION: 2 Game plan Demand More like getting a check from oil companies if one buys a high mileage car Conservation

  16. Analysis of electric vehicle interconnection with commercial building microgrids

    E-Print Network [OSTI]

    Stadler, Michael

    2011-01-01

    with commercial building microgrids Michael Stadler, Gonalocommercial building microgrids *) Michael Stadler GonaloSVOW), http://der.lbl.gov/microgrids-lbnl/current-project-

  17. Impacts of Regional Electricity Prices and Building Type on the Economics of Commercial Photovoltaic Systems

    SciTech Connect (OSTI)

    Ong, S.; Campbell, C.; Clark, N.

    2012-12-01

    To identify the impacts of regional electricity prices and building type on the economics of solar photovoltaic (PV) systems, 207 rate structures across 77 locations and 16 commercial building types were evaluated. Results for expected solar value are reported for each location and building type. Aggregated results are also reported, showing general trends across various impact categories.

  18. Evaluating the DSM Potential for Industrial Electrotechnologies and Management Practices

    E-Print Network [OSTI]

    Harrell, P. J.; Pavone, A.

    1991-01-01

    the commercial penetration of each of these technologies. Factors affecting commercial penetration include ANTHONY PAVONE Senior Consultant SRI International Menlo Park, California the existing level of market penetration, fuel prices, electricity... penetration, fuel prices, electricity prices, capital investment requirements, perceived risk, and internal hurdles rates for investment. In order to fully determine which of these technologies should be included in an industrial DSM program, various HL...

  19. Quantifying Changes in Building Electricity Use, with Application to Demand Response

    SciTech Connect (OSTI)

    Mathieu, Johanna L.; Price, Phillip N.; Kiliccote, Sila; Piette, Mary Ann

    2010-11-17

    We present methods for analyzing commercial and industrial facility 15-minute-interval electric load data. These methods allow building managers to better understand their facility's electricity consumption over time and to compare it to other buildings, helping them to ask the right questions to discover opportunities for demand response, energy efficiency, electricity waste elimination, and peak load management. We primarily focus on demand response. Methods discussed include graphical representations of electric load data, a regression-based electricity load model that uses a time-of-week indicator variable and a piecewise linear and continuous outdoor air temperature dependence, and the definition of various parameters that characterize facility electricity loads and demand response behavior. In the future, these methods could be translated into easy-to-use tools for building managers.

  20. Tariff-based analysis of commercial building electricity prices

    E-Print Network [OSTI]

    Coughlin, Katie M.; Bolduc, Chris A.; Rosenquist, Greg J.; Van Buskirk, Robert D.; McMahon, James E.

    2008-01-01

    4.2 E?ective Marginal Prices . . . . . . . . . . . . . . . .Demand Prices . . . . . . . . . . . . . . . . . . . . . .4 Calculation of Electricity Prices 4.1 Average

  1. The added economic and environmental value of plug-in electric vehicles connected to commercial building microgrids

    E-Print Network [OSTI]

    Stadler, Michael

    2010-01-01

    building has a peak electricity demand of 373 kW, and yearlyWinter (Nov. Apr. ) )Electricity electricity demandelectricity demand (US$/kWh) (US$/kW) (US$/kWh) (US $/kW)

  2. A Look at Health Care Buildings - How do they use electricity

    U.S. Energy Information Administration (EIA) Indexed Site

    Electricity Usage Return to: A Look at Health Care Buildings How large are they? How many employees are there? Where are they located? How old are they? Who owns and occupies them?...

  3. Using Whole-Building Electric Load Data in Continuous or Retro-Commissioning

    SciTech Connect (OSTI)

    Price, Phillip N.; Mathieu, Johanna L.; Kiliccote, Sila; Piette, Mary Ann

    2011-07-01

    Whole-building electric load data can often reveal problems with building equipment or operations. In this paper, we present methods for analyzing 15-minute-interval electric load data. These methods allow building operators, energy managers, and commissioning agents to better understand a building's electricity consumption over time and to compare it to other buildings, helping them to 'ask the right questions' to discover opportunities for electricity waste elimination, energy efficiency, peak load management, and demand response. For example: Does the building use too much energy at night, or on hot days, or in the early evening? Knowing the answer to questions like these can help with retro-commissioning or continuous commissioning. The methods discussed here can also be used to assess how building energy performance varies with time. Comparing electric load before and after fixing equipment or changing operations can help verify that the fixes have the intended effect on energy consumption. Analysis methods discussed in this paper include: ways to graphically represent electric load data; the definition of various parameters that characterize facility electricity loads; and a regression-based electricity load model that accounts for both time of week and outdoor air temperature. The methods are illustrated by applying them to data from commercial buildings. We demonstrate the ability to recognize changes in building operation, and to quantify changes in energy performance. Some key findings are: 1) Plotting time series electric load data is useful for understanding electricity consumption patterns and changes to those patterns, but results may be misleading if data from different time intervals are not weather-normalized. 2) Parameter plots can highlight key features of electric load data and may be easier to interpret than plots of time series data themselves. 3) A time-of-week indicator variable (as compared to time-of-day and day-of-week indicator variables) improves the accuracy of regression models of electric load. 4) A piecewise linear and continuous outdoor air temperature dependence can be derived without the use of a change-point model (which would add complexity to the modeling algorithm) or assumptions about when structural changes occur (which could introduce inaccuracy). 5) A model that includes time-of-week and temperature dependence can be used for weather normalization and can determine whether the building is unusually temperature-sensitive, which can indicate problems with HVAC operation.

  4. Using Electricity",,,"Electricity Consumption",,,"Electricity...

    U.S. Energy Information Administration (EIA) Indexed Site

    A. Total Electricity Consumption and Expenditures for All Buildings, 2003" ,"All Buildings Using Electricity",,,"Electricity Consumption",,,"Electricity Expenditures" ,"Number of...

  5. Electricity",,,"Electricity Consumption",,,"Electricity Expenditures...

    U.S. Energy Information Administration (EIA) Indexed Site

    C9. Total Electricity Consumption and Expenditures, 1999" ,"All Buildings Using Electricity",,,"Electricity Consumption",,,"Electricity Expenditures" ,"Number of Buildings...

  6. Analysis of electric vehicle interconnection with commercial building microgrids

    E-Print Network [OSTI]

    Stadler, Michael

    2011-01-01

    USA http://eetd.lbl.gov/EA/EMP/emp-pubs.html The work described in this paper was funded by the Office of Electricity

  7. Solar electric buildings: An overview of today`s applications

    SciTech Connect (OSTI)

    NONE

    1997-02-01

    This brochure presents a broad look at photovoltaic-powered buildings. It includes residential and commercial systems, both stand-alone and connected to utility power, that are located in urban, near-urban, and rural settings around the world. As photovoltaic (PV) technology continues to improve and costs drop, opportunities for PV will multiply. PV systems for buildings, such as those shown here, represent one of the strongest near-term markets.

  8. Innovative Control of Electric Heat in Multifamily Buildings

    E-Print Network [OSTI]

    Lempereur, D.; Bobker, M.

    2004-01-01

    This paper describes the application of web-based wireless technology for control of electric heating in a large multifamily housing complex. The control system architecture and components are described. A web-based application enables remote...

  9. Hawaii demand-side management resource assessment. Final report, Reference Volume 5: The DOETRAN user`s manual; The DOE-2/DBEDT DSM forecasting model interface

    SciTech Connect (OSTI)

    1995-04-01

    The DOETRAN model is a DSM database manager, developed to act as an intermediary between the whole building energy simulation model, DOE-2, and the DBEDT DSM Forecasting Model. DOETRAN accepts output data from DOE-2 and TRANslates that into the format required by the forecasting model. DOETRAN operates in the Windows environment and was developed using the relational database management software, Paradox 5.0 for Windows. It is not necessary to have any knowledge of Paradox to use DOETRAN. DOETRAN utilizes the powerful database manager capabilities of Paradox through a series of customized user-friendly windows displaying buttons and menus with simple and clear functions. The DOETRAN model performs three basic functions, with an optional fourth. The first function is to configure the user`s computer for DOETRAN. The second function is to import DOE-2 files with energy and loadshape data for each building type. The third main function is to then process the data into the forecasting model format. As DOETRAN processes the DOE-2 data, graphs of the total electric monthly impacts for each DSM measure appear, providing the user with a visual means of inspecting DOE-2 data, as well as following program execution. DOETRAN provides three tables for each building type for the forecasting model, one for electric measures, gas measures, and basecases. The optional fourth function provided by DOETRAN is to view graphs of total electric annual impacts by measure. This last option allows a comparative view of how one measure rates against another. A section in this manual is devoted to each of the four functions mentioned above, as well as computer requirements and exiting DOETRAN.

  10. Data Visualization for Quality-Check Purposes of Monitored Electricity Consumption in All Office Buildings in the ESL Database

    E-Print Network [OSTI]

    Sreshthaputra, A.; Abushakra, B.; Haberl, J. S.; Claridge, D. E.

    2000-01-01

    This report comprises an effort to visualize the monitored electricity consumption in all office buildings (not including the office buildings comprising other functions as classrooms and laboratories, for instance) in the ESL database. This data...

  11. 308 Building electrical load list and panel schedules

    SciTech Connect (OSTI)

    Giamberardini, S.J.

    1994-09-13

    This report contains two lists. The first lists equipment, load location, source of power, and breaker identification. The second compiles the same information but in a different format, namely, for each power source, the breaker, equipment, and location is given. Building 308 is part of the Fuels and Materials Examination Facility which houses the Secure Automated Fabrication process line for fabrication of reactor fuels and the Breeder Processing Engineering Test for processing Fast Flux Test Facility fuel to demonstrate closure of the fuel cycle.

  12. Building a 21st Century Electric Grid | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirley Ann JacksonDepartment|Marketing, LLCEfficiency | Department of EnergyBuilding orPhoto

  13. Abstract--We present new approaches for building yearly and seasonal models for 5-minute ahead electricity load

    E-Print Network [OSTI]

    Koprinska, Irena

    to building a single yearly model. I. INTRODUCTION PREDICTING the future electricity demand, also called electricity load forecasting. They are evaluated using two full years of Australian electricity load data. We first analyze the cyclic nature of the electricity load and show that the autocorrelation function

  14. Advancing Net-Zero Energy Commercial Buildings; Electricity, Resources, & Building Systems Integration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-10-01

    This fact sheet provides an overview of the research the National Renewable Energy Laboratory is conducting to achieve net-zero energy buildings (NZEBs). It also includes key definitions of NZEBs and inforamtion about an NZEB database that captures information about projects around the world.

  15. Commercial and Industrial DSM Program Overview | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial and Industrial DSM Program Overview Commercial and Industrial DSM Program Overview Presentation provides an overview of PEPCO and Delmarva Power's demand side management...

  16. Hawaii demand-side management resource assessment. Final report, Reference Volume 4: The DBEDT DSM assessment model user`s manual

    SciTech Connect (OSTI)

    1995-04-01

    The DBEDT DSM Assessment Model (DSAM) is a spreadsheet model developed in Quattro Pro for Windows that is based on the integration of the DBEDT energy forecasting model, ENERGY 2020, with the output from the building energy use simulation model, DOE-2. DOE-2 provides DSM impact estimates for both energy and peak demand. The ``User`s Guide`` is designed to assist DBEDT staff in the operation of DSAM. Supporting information on model structure and data inputs are provided in Volumes 2 and 3 of the Final Report. DSAM is designed to provide DBEDT estimates of the potential DSM resource for each county in Hawaii by measure, program, sector, year, and levelized cost category. The results are provided for gas and electric and for both energy and peak demand. There are two main portions of DSAM, the residential sector and the commercial sector. The basic underlying logic for both sectors are the same. However, there are some modeling differences between the two sectors. The differences are primarily the result of (1) the more complex nature of the commercial sector, (2) memory limitations within Quattro Pro, and (3) the fact that the commercial sector portion of the model was written four months after the residential sector portion. The structure for both sectors essentially consists of a series of input spreadsheets, the portion of the model where the calculations are performed, and a series of output spreadsheets. The output spreadsheets contain both detailed and summary tables and graphs.

  17. Reducing Residential Peak Electricity Demand with Mechanical Pre-Cooling of Building Thermal Mass

    SciTech Connect (OSTI)

    Turner, Will; Walker, Iain; Roux, Jordan

    2014-08-01

    This study uses an advanced airflow, energy and humidity modelling tool to evaluate the potential for residential mechanical pre-cooling of building thermal mass to shift electricity loads away from the peak electricity demand period. The focus of this study is residential buildings with low thermal mass, such as timber-frame houses typical to the US. Simulations were performed for homes in 12 US DOE climate zones. The results show that the effectiveness of mechanical pre-cooling is highly dependent on climate zone and the selected pre-cooling strategy. The expected energy trade-off between cooling peak energy savings and increased off-peak energy use is also shown.

  18. Electricity",,,"Electricity Consumption",,,"Electricity Expenditures...

    U.S. Energy Information Administration (EIA) Indexed Site

    DIV. Total Electricity Consumption and Expenditures by Census Division, 1999" ,"All Buildings Using Electricity",,,"Electricity Consumption",,,"Electricity Expenditures" ,"Number...

  19. Implementing and managing a DSM program: Central Hudson`s dollar $avers commercial/industrial rebate program

    SciTech Connect (OSTI)

    Voltz, M.F.

    1996-01-01

    Demand-Side Management (DSM) program managers at utilities throughout the United States are faced with the challenge of achieving DSM goals while minimizing program costs in order to mitigate rate impacts. Many utilities are also allowed to earn a shareholder equity incentive based upon the cost effectiveness of DSM programs (shared savings type incentive). Program goals must be achieved in a market which is constantly evolving. This paper presents Central Hudson Gas & Electric Corporations`s experience over the past 4 years implementing and managing a commercial industrial (C/I) efficient lighting rebate program which has been marketed as the Dollar $avers Lighting rebate program.

  20. Building

    E-Print Network [OSTI]

    Physical Facilities

    2013-11-12

    MATHEMATICAL SCIENCES BUILDING. BUILDING EMERGENCY PLAN. Date Adopted: Sept 20, 2013. Date Revised: Sep 20. 2013. Prepared By: Kelly...

  1. Designing a Thermal Energy Storage Program for Electric Utilities

    E-Print Network [OSTI]

    Niehus, T. L.

    1994-01-01

    Electric utilities are looking at thermal energy storage technology as a viable demand side management (DSM) option. In order for this DSM measure to be effective, it must be incorporated into a workable, well-structured utility program. This paper...

  2. Innovative and Progressive Electric Utility Demand-Side Management Strategies

    E-Print Network [OSTI]

    Epstein, G. J.; Fuller, W. H.

    1989-01-01

    to as Demand-Side Management (DSM) and are extremely rigorous in scope. Electric utilities have pursued many different DSM policies and strategies during the past decade. These programs have addressed various technologies and have included rebates for efficient...

  3. The role of building technologies in reducing and controlling peak electricity demand

    SciTech Connect (OSTI)

    Koomey, Jonathan; Brown, Richard E.

    2002-09-01

    Peak power demand issues have come to the fore recently because of the California electricity crisis. Uncertainties surrounding the reliability of electric power systems in restructured markets as well as security worries are the latest reasons for such concerns, but the issues surrounding peak demand are as old as the electric utility system itself. The long lead times associated with building new capacity, the lack of price response in the face of time-varying costs, the large difference between peak demand and average demand, and the necessity for real-time delivery of electricity all make the connection between system peak demand and system reliability an important driver of public policy in the electric utility sector. This exploratory option paper was written at the request of Jerry Dion at the U.S.Department of Energy (DOE). It is one of several white papers commissioned in 2002 exploring key issues of relevance to DOE. This paper explores policy-relevant issues surrounding peak demand, to help guide DOE's research efforts in this area. The findings of this paper are as follows. In the short run, DOE funding of deployment activities on peak demand can help society achieve a more economically efficient balance between investments in supply and demand-side technologies. DOE policies can promote implementation of key technologies to ameliorate peak demand, through government purchasing, technology demonstrations, and improvements in test procedures, efficiency standards, and labeling programs. In the long run, R&D is probably the most important single leverage point for DOE to influence the peak demand issue. Technologies for time-varying price response hold great potential for radically altering the way people use electricity in buildings, but are decades away from widespread use, so DOE R&D and expertise can make a real difference here.

  4. UBC Social Ecological Economic Development Studies (SEEDS) Student Report Electric Vehicle Charging Impact Review for MultiUser Residential Buildings in British Columbia

    E-Print Network [OSTI]

    596 Electric Vehicle Charging Impact Review for Multi User Residential Buildings in British .......................................................................................................................................... 4 3 Electric Vehicles in British Columbia .................................................................................................................................... 27 6.1 City of Vancouver Electric Vehicle Provision Regulations

  5. Utility DSM Rebates for electronic ballasts: National estimates and market impact (1992 - 1997)

    E-Print Network [OSTI]

    Busch, C.B.; Atkinson, B.A.; Eto, J.H.; Turiel, I.; McMahon, J.E.

    2000-01-01

    Figure 1. Ballast Shipment and DSM Rebate Data . . . . .Side Management (DSM) rebates for electronic fluorescent2 Electronic Ballast DSM Rebate Estimates Derived from Core

  6. Quantifying Changes in Building Electricity Use, with Application to Demand Response

    E-Print Network [OSTI]

    Mathieu, Johanna L.

    2012-01-01

    complex building energy consumption data. in Proceedingscomplex building energy consumption data, Energy and

  7. Building-Level Intensities

    U.S. Energy Information Administration (EIA) Indexed Site

    . Electricity Consumption and Expenditure Intensities for Non-Mall Buildings, 2003" ,"Electricity Consumption",,,,,,"Electricity Expenditures" ,"per Building (thousand kWh)","per...

  8. Automatic Digital Surface Model (DSM) Generation from Linear Array Images

    E-Print Network [OSTI]

    Giger, Christine

    Automatic Digital Surface Model (DSM) Generation from Linear Array Images A dissertation submitted-examiner Presented by Li Zhang Zurich 2005 #12;IGP Mitteilungen Nr. 88 Automatic Digital Surface Model (DSM-906467-55-4 #12;DISS. ETH NO. 16078 Automatic Digital Surface Model (DSM) Generation from Linear Array Images

  9. Variability in Automated Responses of Commercial Buildings and Industrial Facilities to Dynamic Electricity Prices

    SciTech Connect (OSTI)

    Mathieu, Johanna L.; Callaway, Duncan S.; Kiliccote, Sila

    2011-08-16

    Changes in the electricity consumption of commercial buildings and industrial facilities (C&I facilities) during Demand Response (DR) events are usually estimated using counterfactual baseline models. Model error makes it difficult to precisely quantify these changes in consumption and understand if C&I facilities exhibit event-to-event variability in their response to DR signals. This paper seeks to understand baseline model error and DR variability in C&I facilities facing dynamic electricity prices. Using a regression-based baseline model, we present a method to compute the error associated with estimates of several DR parameters. We also develop a metric to determine how much observed DR variability results from baseline model error rather than real variability in response. We analyze 38 C&I facilities participating in an automated DR program and find that DR parameter errors are large. Though some facilities exhibit real DR variability, most observed variability results from baseline model error. Therefore, facilities with variable DR parameters may actually respond consistently from event to event. Consequently, in DR programs in which repeatability is valued, individual buildings may be performing better than previously thought. In some cases, however, aggregations of C&I facilities exhibit real DR variability, which could create challenges for power system operation.

  10. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    SciTech Connect (OSTI)

    Lacommare, Kristina S H; Stadler, Michael; Aki, Hirohisa; Firestone, Ryan; Lai, Judy; Marnay, Chris; Siddiqui, Afzal

    2008-05-15

    The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic as well as environmental attractiveness of on-site generation (e.g., PV, fuel cells, reciprocating engines or microturbines operating with or without CHP) and contribute to enhanced demand response. In order to examine the impact of storage technologies on demand response and carbon emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that has the minimization of annual energy costs as its objective function. By implementing this approach in the General Algebraic Modeling System (GAMS), the problem is solved for a given test year at representative customer sites, such as schools and nursing homes, to obtain not only the level of technology investment, but also the optimal hourly operating schedules. This paper focuses on analysis of storage technologies in DER optimization on a building level, with example applications for commercial buildings. Preliminary analysis indicates that storage technologies respond effectively to time-varying electricity prices, i.e., by charging batteries during periods of low electricity prices and discharging them during peak hours. The results also indicate that storage technologies significantly alter the residual load profile, which can contribute to lower carbon emissions depending on the test site, its load profile, and its adopted DER technologies.

  11. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    E-Print Network [OSTI]

    Stadler, Michael

    2008-01-01

    those described by the Electricity Storage Association (see also Electricity Storage Association). The installationtechnologies. References Electricity Storage Association,

  12. Smart-Metering for Monitoring Building Power Distribution Network using Instantaneous Phasor Computations of Electrical Signals

    E-Print Network [OSTI]

    K.R., Krishnanand

    2013-01-01

    Smart-Metering for Monitoring Building Power Distributionimplementable for smart-meters for a building. Eachcontrol node of a building so as to make smart decisions.

  13. Estimates of U.S. Commercial Building Electricity Intensity Trends: Issues Related to End-Use and Supply Surveys

    SciTech Connect (OSTI)

    Belzer, David B.

    2004-09-04

    This report examines measurement issues related to the amount of electricity used by the commercial sector in the U.S. and the implications for historical trends of commercial building electricity intensity (kWh/sq. ft. of floor space). The report compares two (Energy Information Administration) sources of data related to commercial buildings: the Commercial Building Energy Consumption Survey (CBECS) and the reporting by utilities of sales to commercial customers (survey Form-861). Over past two decades these sources suggest significantly different trend rates of growth of electricity intensity, with the supply (utility)-based estimate growing much faster than that based only upon the CBECS. The report undertakes various data adjustments in an attempt to rationalize the differences between these two sources. These adjustments deal with: 1) periodic reclassifications of industrial vs. commercial electricity usage at the state level and 2) the amount of electricity used by non-enclosed equipment (non-building use) that is classified as commercial electricity sales. In part, after applying these adjustments, there is a good correspondence between the two sources over the the past four CBECS (beginning with 1992). However, as yet, there is no satisfactory explanation of the differences between the two sources for longer periods that include the 1980s.

  14. Computational Needs for the Next Generation Electric Grid Proceedings

    E-Print Network [OSTI]

    Birman, Kenneth

    2012-01-01

    Supervisory and Energy Management System of largeSimes, An Energy Management System for BuildingtoaDSMbasedenergymanagementsystemfor realtime

  15. Plug-in Electric Vehicle Interactions with a Small Office Building: An Economic Analysis using DER-CAM

    SciTech Connect (OSTI)

    Momber, Ilan; Gomez, Toms; Venkataramanan, Giri; Stadler, Michael; Beer, Sebastian; Lai, Judy; Marnay, Chris; Battaglia, Vincent

    2010-06-01

    It is generally believed that plug-in electric vehicles (PEVs) offer environmental and energy security advantages compared to conventional vehicles. Policies are stimulating electric transportation deployment, and PEV adoption may grow significantly. New technology and business models are being developed to organize the PEV interface and their interaction with the wider grid. This paper analyzes the PEVs' integration into a building's Energy Management System (EMS), differentiating between vehicle to macrogrid (V2M) and vehicle to microgrid (V2m) applications. This relationship is modeled by the Distributed Energy Resources Customer Adoption Model (DER-CAM), which finds optimal equipment combinations to meet microgrid requirements at minimum cost, carbon footprint, or other criteria. Results derive battery value to the building and the possibility of a contractual affiliation sharing the benefit. Under simple annual fixed payments and energy exchange agreements, vehicles are primarily used to avoid peak demand charges supplying cheaper off-peak electricity to the building during workdays.

  16. Dates of Orders Placed with Messrs Dllmann, Dortmund for High Power Installations in the Various Buildings and for the Supply of Electrical Equipment

    E-Print Network [OSTI]

    1958-01-01

    Dates of Orders Placed with Messrs Dllmann, Dortmund for High Power Installations in the Various Buildings and for the Supply of Electrical Equipment

  17. Adjudication of a Contract for the Construction of a Building for the Electricity Sub-Station of the 300 GeV Accelerator

    E-Print Network [OSTI]

    1973-01-01

    Adjudication of a Contract for the Construction of a Building for the Electricity Sub-Station of the 300 GeV Accelerator

  18. Proposal for the award of a contract for undertaking the industrial electrical installations in the LEP surface buildings, shafts and access tunnels

    E-Print Network [OSTI]

    1984-01-01

    Proposal for the award of a contract for undertaking the industrial electrical installations in the LEP surface buildings, shafts and access tunnels

  19. The Impacts of Utility-Sponsored Demand-Side Management Programs on Industrial Electricity Consumers

    E-Print Network [OSTI]

    Rosenblum, J. I.

    1994-01-01

    One of the most pressing issues in electric utility regulation today is the extent to which demand-side management (DSM) programs should be promoted by utilities. DSM refers to energy-efficiency or conservation measures, ...

  20. Next-generation building energy management systems and implications for electricity markets.

    SciTech Connect (OSTI)

    Zavala, V. M.; Thomas, C.; Zimmerman, M.; Ott, A.

    2011-08-11

    The U.S. national electric grid is facing significant changes due to aggressive federal and state targets to decrease emissions while improving grid efficiency and reliability. Additional challenges include supply/demand imbalances, transmission constraints, and aging infrastructure. A significant number of technologies are emerging under this environment including renewable generation, distributed storage, and energy management systems. In this paper, we claim that predictive energy management systems can play a significant role in achieving federal and state targets. These systems can merge sensor data and predictive statistical models, thereby allowing for a more proactive modulation of building energy usage as external weather and market signals change. A key observation is that these predictive capabilities, coupled with the fast responsiveness of air handling units and storage devices, can enable participation in several markets such as the day-ahead and real-time pricing markets, demand and reserves markets, and ancillary services markets. Participation in these markets has implications for both market prices and reliability and can help balance the integration of intermittent renewable resources. In addition, these emerging predictive energy management systems are inexpensive and easy to deploy, allowing for broad building participation in utility centric programs.

  1. Low-income DSM Programs: Methodological approach to determining the cost-effectiveness of coordinated partnerships

    SciTech Connect (OSTI)

    Brown, M.A.; Hill, L.J.

    1994-05-01

    As governments at all levels become increasingly budget-conscious, expenditures on low-income, demand-side management (DSM) programs are being evaluated more on the basis of efficiency at the expense of equity considerations. Budgetary pressures have also caused government agencies to emphasize resource leveraging and coordination with electric and gas utilities as a means of sharing the expenses of low-income programs. The increased involvement of electric and gas utilities in coordinated low-income DSM programs, in turn, has resulted in greater emphasis on estimating program cost-effectiveness. The objective of this study is to develop a methodological approach to estimate the cost- effectiveness of coordinated low-income DSM programs, given the special features that distinguish these programs from other utility-operated DSM programs. The general approach used in this study was to (1) select six coordinated low-income DSM programs from among those currently operating across the United States, (2) examine the main features of these programs, and (3) determine the conceptual and pragmatic problems associated with estimating their cost-effectiveness. Three types of coordination between government and utility cosponsors were identified. At one extreme, local agencies operate {open_quotes}parallel{close_quotes} programs, each of which is fully funded by a single sponsor (e.g., one funded by the U.S. Department of Energy and the other by a utility). At the other extreme are highly {open_quotes}coupled{close_quotes} programs that capitalize on the unique capabilities and resources offered by each cosponsor. In these programs, agencies employ a combination of utility and government funds to deliver weatherization services as part of an integrated effort. In between are {open_quotes}supplemental{close_quotes} programs that utilize resources to supplement the agency`s government-funded weatherization, with no changes to the operation of that program.

  2. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    E-Print Network [OSTI]

    Stadler, Michael

    2008-01-01

    with Electric and Thermal Storage Technologies Michaelwith Electric and Thermal Storage Technologies 1 Michael2006). Electrical and thermal storage is added as an option

  3. The role of building technologies in reducing and controlling peak electricity demand

    E-Print Network [OSTI]

    Koomey, Jonathan; Brown, Richard E.

    2002-01-01

    AND CONTROLLING PEAK ELECTRICITY DEMAND Jonathan Koomey* andData to Improve Electricity Demand ForecastsFinal Report.further research. Electricity demand varies constantly. At

  4. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    E-Print Network [OSTI]

    Stadler, Michael

    2008-01-01

    that growth in electricity demand in developed countriesof displacement of electricity demand by heat- activatedmeets all of its electricity demand via utility purchases

  5. Smart-Metering for Monitoring Building Power Distribution Network using Instantaneous Phasor Computations of Electrical Signals

    E-Print Network [OSTI]

    K.R., Krishnanand

    2013-01-01

    phase smart meter . in Electrical and Control Engineering (Phasor Computations of Electrical Signals Krishnanand K.R. ,Panda* Department of Electrical and Computer Engineering,

  6. The added economic and environmental value of plug-in electric vehicles connected to commercial building microgrids

    SciTech Connect (OSTI)

    Stadler, Michael; Momber, Ilan; Megel, Olivier; Gomez, Toms; Marnay, Chris; Beer, Sebastian; Lai, Judy; Battaglia, Vincent

    2010-08-25

    Connection of electric storage technologies to smartgrids or microgrids will have substantial implications for building energy systems. In addition to potentially supplying ancillary services directly to the traditional centralized grid (or macrogrid), local storage will enable demand response. As an economically attractive option, mobile storage devices such as plug-in electric vehicles (EVs) are in direct competition with conventional stationary sources and storage at the building. In general, it is assumed that they can improve the financial as well as environmental attractiveness of renewable and fossil based on-site generation (e.g. PV, fuel cells, or microturbines operating with or without combined heat and power). Also, mobile storage can directly contribute to tariff driven demand response in commercial buildings. In order to examine the impact of mobile storage on building energy costs and carbon dioxide (CO2) emissions, a microgrid/distributed-energy-resources (DER) adoption problem is formulated as a mixed-integer linear program with minimization of annual building energy costs applying CO2 taxes/CO2 pricing schemes. The problem is solved for a representative office building in the San Francisco Bay Area in 2020. By using employees' EVs for energy management, the office building can arbitrage its costs. But since the car battery lifetime is reduced, a business model that also reimburses car owners for the degradation will be required. In general, the link between a microgrid and an electric vehicle can create a win-win situation, wherein the microgrid can reduce utility costs by load shifting while the electric vehicle owner receives revenue that partially offsets his/her expensive mobile storage investment. For the California office building with EVs connected under a business model that distributes benefits, it is found that the economic impact is very limited relative to the costs of mobile storage for the site analyzed, i.e. cost reductions from electric vehicle connections are modest. Nonetheless, this example shows that some economic benefit is created because of avoided demand charges and on-peak energy. The strategy adopted by the office building is to avoid these high on-peak costs by using energy from the mobile storage in the business hours. CO2 emission reduction strategy results indicate that EVs' contribution at the selected office building are minor.

  7. Smart buildings with electric vehicle interconnection as buffer for local renewables?

    E-Print Network [OSTI]

    Stadler, Michael

    2012-01-01

    a building optimize its energy usage without knowing itsa building optimize its energy usage without knowing itshardly optimize its energy usage and models for estimating

  8. A High-Fidelity Energy Monitoring and Feedback Architecture for Reducing Electrical Consumption in Buildings

    E-Print Network [OSTI]

    Jiang, Xiaofan

    2010-01-01

    Administration. Buildings energy data book, 2008. http: //process flow for energy data analysis and visualization,and accessible is the building energy data provided by this

  9. Using Whole-Building Electric Load Data in Continuous or Retro-Commissioning

    E-Print Network [OSTI]

    Price, Phillip N.

    2012-01-01

    to assess how building energy performance varies with time.monitoring of whole-building energy performance should bebuilding operation, and to quantify changes in energy performance.

  10. Advanced Controls and Communications for Demand Response and Energy Efficiency in Commercial Buildings

    E-Print Network [OSTI]

    Kiliccote, Sila; Piette, Mary Ann; Hansen, David

    2006-01-01

    buildings. A demand-side management framework from buildingthe integration of DR in demand-side management activitiesdevelopments. The demand-side management (DSM) framework

  11. U.S. Electric Utility Demand-Side Management

    Reports and Publications (EIA)

    2002-01-01

    Final issue of this report. - Presents comprehensive information on electric power industry demand side management (DSM) activities in the United States at the national, regional, and utility levels.

  12. Demand Side Management (DSM) Through Absorption Refrigeration Systems

    E-Print Network [OSTI]

    Chao, P. Y.; Shukla, D.; Amarnath, A.; Mergens, E.

    1992-01-01

    will be illustrated by two recent case studies. INTRODUCTION This paper deals with a Demand Side Management (DSM) option of using waste heat for refrigeration. Absorption Refrigeration from waste heat offers a viable option for DSM. This can profitably either... years. The potential for avoided cost through DSM will approach $45 billion over the next decade(1,2). Waste Energy And Pollutants The U.S. industry consumes more than 30 quads (quadrillion Btu) of energy each year. About one third...

  13. Building Retrofit and DSM Study in Jiangsu | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LISTStar Energy LLC JumpBiossenceBrunswick, Maine: EnergyGHGs NationalLife-Cycle

  14. Building Retrofit and DSM Study in Jiangsu | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowaWisconsin:PontiacInformationAssessment Toolkit Jump to:Tools(Redirected

  15. Please cite this article in press as: T. Zhang, et al., Modelling electricity consumption in office buildings: An agent based approach. Energy Buildings (2011), doi:10.1016/j.enbuild.2011.07.007

    E-Print Network [OSTI]

    Aickelin, Uwe

    2011-01-01

    Please cite this article in press as: T. Zhang, et al., Modelling electricity consumption in office behaviour, to simulate the electricity consumption in office buildings. Based on a case study, we use office electricity consumption problems. This paper theoretically contributes to an integration

  16. Federal Buildings Supplemental Survey 1993

    U.S. Energy Information Administration (EIA) Indexed Site

    6. Electricity Consumption and Expenditure Intensities in FBSS Buildings in Federal Region 3, 1993 Electricity Consumption Electricity Expenditures Distribution of Building-Level...

  17. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roland Risser Director, Building Technologies Office Building Technologies Office Overview Our Homes and Buildings Use 40% of Our Nation's Energy and 75% of Electricity Energy Use...

  18. Protogrammetry and Remote sensing Semester Project. DSM to DTM generation -1 -5/29/2008

    E-Print Network [OSTI]

    Giger, Christine

    Protogrammetry and Remote sensing Semester Project. DSM to DTM generation - 1 - 5 of Technology Zurich #12;Protogrammetry and Remote sensing Semester Project. DSM to DTM generation - 2 - 5.............................................................................................13 3 GENERATION OF DSM WITH IMAGE MATCHING

  19. Building America Top Innovations 2012: High-Performance with Solar Electric Reduced Peak Demand

    SciTech Connect (OSTI)

    none,

    2013-01-01

    This Building America Top Innovations profile describes Building America solar home research that has demonstrated the ability to reduce peak demand by 75%. Numerous field studies have monitored power production and system effectiveness.

  20. A High-Fidelity Energy Monitoring and Feedback Architecture for Reducing Electrical Consumption in Buildings

    E-Print Network [OSTI]

    Jiang, Xiaofan

    2010-01-01

    Energy Monitoring and 2.2.1 Building Management Systems .energy flows in buildings and an overview of existing monitoring and management solutions in the previous chapter, we now take a more systems

  1. Smart buildings with electric vehicle interconnection as buffer for local renewables?

    E-Print Network [OSTI]

    Stadler, Michael

    2012-01-01

    hourly loads and energy management system (EMS) data.the building energy management system (EMS) can manage (

  2. US electric utility demand-side management, 1994

    SciTech Connect (OSTI)

    NONE

    1995-12-26

    The report presents comprehensive information on electric power industry demand-side management (DSM) activities in US at the national, regional, and utility levels. Objective is provide industry decision makers, government policy makers, analysts, and the general public with historical data that may be used in understanding DSM as it relates to the US electric power industry. The first chapter, ``Profile: US Electric Utility Demand-Side Management,`` presents a general discussion of DSM, its history, current issues, and a review of key statistics for the year. Subsequent chapters present discussions and more detailed data on energy savings, peak load reductions, and costs attributable to DSM.

  3. Smart buildings with electric vehicle interconnection as buffer for local renewables?

    E-Print Network [OSTI]

    Stadler, Michael

    2012-01-01

    SVOW), http://der.lbl.gov/microgrids-lbnl/current-project-to commercial building microgrids, 2nd European Conference2009, Special Issue on Microgrids and Energy Management,

  4. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    E-Print Network [OSTI]

    Stadler, Michael

    2008-01-01

    2003. Hatziargyriou, N. et al. , Microgrids, An Overview ofand Operation of Microgrids in Commercial Buildings, IEEEsuccessful deployment of microgrids will depend heavily on

  5. A High-Fidelity Energy Monitoring and Feedback Architecture for Reducing Electrical Consumption in Buildings

    E-Print Network [OSTI]

    Jiang, Xiaofan

    2010-01-01

    building. . . . . . . . . . . . . . .SCADA is a supervisoryInc. http://www.campbellsci.com/scada. [6] DOE-2. http://BIBLIOGRAPHY [17] SCADA Group. http://www.scadagroup.com/

  6. Quantifying Changes in Building Electricity Use, with Application to Demand Response

    E-Print Network [OSTI]

    Mathieu, Johanna L.

    2012-01-01

    data from commercial build- ings, Journal of Solar Energybuilding energy data: Part I-II, Journal of Solar Energydata. in Proceedings of ASME International Solar Energy

  7. DSM savings verification through short-term pre-and-post energy monitoring at 90 facilities

    SciTech Connect (OSTI)

    Misuriello, H.

    1994-12-31

    This paper summarizes the DSM impact results obtained from short-term energy measurements performed at sites monitored as part of the Commercial, Industrial and Agricultural (CIA) Retrofit Incentives Evaluation Program sponsored by the Pacific Gas & Electric Company. The DSM measures include those typically found in these sectors; i.e., lighting, motors, irrigation pumps and HVAC modifications. The most important findings from the site measurements are the estimated annual energy and demand savings. Although there may be large differences of projected energy savings for individual sites, when viewed in the aggregate the total energy savings for the program were found to be fairly comparable to engineering estimates. This paper describes the lessons learned from attempting in-situ impact evaluations of DSM savings under both direct and custom rebate approaches. Impact parameters of interest include savings under both direct and custom rebate approaches. Impact parameters of interest include gross first-year savings and load shape impacts. The major method discussed in this paper is short-term before/after field monitoring of affected end-uses; however, the complete impact evaluation method also includes a billing analysis component and a hybrid statistical/engineering model component which relies, in part, on the short-term end-use data.

  8. Miscellaneous Electricity Services in the Buildings Sector (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01

    Residential and commercial electricity consumption for miscellaneous services has grown significantly in recent years and currently accounts for more electricity use than any single major end-use service in either sector (including space heating, space cooling, water heating, and lighting). In the residential sector, a proliferation of consumer electronics and information technology equipment has driven much of the growth. In the commercial sector, telecommunications and network equipment and new advances in medical imaging have contributed to recent growth in miscellaneous electricity use.

  9. Highly Efficient Thermostable DSM Cellulases: Why & How?

    SciTech Connect (OSTI)

    Manoj Kumar, PhD

    2011-04-26

    Lignocellulosic biomass is the most abundant, least expensive renewable natural biological resource for the production of biobased products and bioenergy is important for the sustainable development of human civilization in 21st century. For making the fermentable sugars from lignocellulosic biomass, a reduction in cellulase production cost, an improvement in cellulase performance, and an increase in sugar yields are all vital to reduce the processing costs of biorefineries. Improvements in specific cellulase activities for non-complexed cellulase mixtures can be implemented through cellulase engineering based on rational design or directed evolution for each cellulase component enzyme, as well as on the reconstitution of cellulase components. In this paper, we will provide DSM's efforts in cellulase research and developments and focus on limitations. Cellulase improvement strategies based on directed evolution using screening on relevant substrates, screening for higher thermal tolerance based on activity screening approaches such as continuous culture using insoluble cellulosic substrates as a powerful selection tool for enriching beneficial cellulase mutants from the large library. We will illustrate why and how thermostable cellulases are vital for economic delivery of bioproducts from cellulosic biomass using biochemical conversion approach.

  10. Building America System Research Plan for Reduction of Miscellaneous Electrical Loads in Zero Energy Homes

    SciTech Connect (OSTI)

    Barley, C. D.; Haley, C.; Anderson, R.; Pratsch, L.

    2008-11-01

    This research plan describes the overall scope of system research that is needed to reduce miscellaneous electrical loads (MEL) in future net zero energy homes.

  11. Load-side Demand Management in Buildings usingControlled Electric Springs

    E-Print Network [OSTI]

    Soni, Jayantika; Krishnanand, KR; Panda, Sanjib

    2014-01-01

    renewable energy powered microgrids. It is illustrated, inenergy source powered microgrids. Electric Spring, a smartproblem associated with such microgrids. In this paper, an

  12. Smart buildings with electric vehicle interconnection as buffer for local renewables?

    E-Print Network [OSTI]

    Stadler, Michael

    2012-01-01

    as buffer for local renewables? Michael Stadler, Gonaloas buffer for local renewables? *) Michael Stadler Gonaloowners to integrate renewables and electric vehicles?

  13. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    E-Print Network [OSTI]

    Stadler, Michael

    2008-01-01

    photovoltaics and solar thermal collectors; electricalelectricity) solar thermal collector (kW) PV (kW) electricelectricity) solar thermal collector (kW) PV (kW) electric

  14. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    E-Print Network [OSTI]

    Stadler, Michael

    2008-01-01

    and solar thermal collectors; electrical storage, flowis disallowed; 5. a low storage, PV, and solar thermal priceand heat storage; heat exchangers for application of solar

  15. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    E-Print Network [OSTI]

    Stadler, Michael

    2008-01-01

    lost per hour electrical flow battery 8 thermal Not alland energy ratings of a flow battery are independent of eacha) thermal storage 11 flow battery absorption chiller solar

  16. Load-side Demand Management in Buildings usingControlled Electric Springs

    E-Print Network [OSTI]

    Soni, Jayantika; Krishnanand, KR; Panda, Sanjib

    2014-01-01

    L. Goel, "Demand side load management of smart grids usingP. Shenoy, "Demand-side load management in smart homes," inLoad-side Demand Management in Buildings using Controlled

  17. Automated Continuous Commissioning of Commercial Buildings

    E-Print Network [OSTI]

    Bailey, Trevor

    2013-01-01

    electricity consumption ..the total building electricity consumption between measured87 Figure 49 Total electricity consumption end use breakdown

  18. A State Regulatory Perspective; New Building, Old Motors, and Marginal Electricity Generation

    E-Print Network [OSTI]

    Treadway, N.

    1987-01-01

    Electricity consumption in Texas is expected to grow at 3.2 percent annually for the next ten years. Utility demand management activities, if effective, may reduce that expected rate of growth. Residential cooling, commercial lighting and cooling...

  19. Building a wireless mesh networked real-time electricity metering system in an MIT dormitory

    E-Print Network [OSTI]

    Oehlerking, Austin L

    2009-01-01

    A competitive, closed-loop information feedback system of wireless electricity meters was designed, tested, and implemented in seven MIT dormitory rooms. The meters utilized Allegro Hall Effect current sensors as well as ...

  20. Resource Information and Forecasting Group; Electricity, Resources, & Building Systems Integration (ERBSI) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2009-11-01

    Researchers in the Resource Information and Forecasting group at NREL provide scientific, engineering, and analytical expertise to help characterize renewable energy resources and facilitate the integration of these clean energy sources into the electricity grid.

  1. Smart buildings with electric vehicle interconnection as buffer for local renewables?

    SciTech Connect (OSTI)

    Stadler, Michael; Cardoso, Goncalo; DeForest, Nicholas; Donadee, Jon; Gomez, Tomaz; Lai, Judy; Marnay, Chris; Megel, Olivier; Mendes, Goncalo; Siddiqui, Afzal

    2011-05-01

    Some conclusions from this presentation are: (1) EV Charging/discharging pattern mainly depends on the objective of the building (cost versus CO{sub 2}); (2) performed optimization runs show that stationary batteries are more attractive than mobile storage when putting more focus on CO{sub 2} emissions because stationary storage is available 24 hours a day for energy management - it's more effective; (3) stationary storage will be charged by PV, mobile only marginally; and (4) results will depend on the considered region and tariff. Final research work will show the results for 138 different buildings in nine different climate zones and three major utility service territories.

  2. Microgrids: An emerging paradigm for meeting building electricity and heat requirements efficiently and with appropriate energy quality

    E-Print Network [OSTI]

    Marnay, Chris; Firestone, Ryan

    2007-01-01

    Research Institute. Building CHP While this paper hashence analysis of CHP applications in buildings is a centraland power (CHP) technology, especially for building heating

  3. A High-Fidelity Energy Monitoring and Feedback Architecture for Reducing Electrical Consumption in Buildings

    E-Print Network [OSTI]

    Jiang, Xiaofan

    2010-01-01

    architecture that provides fine-grained real-time visibility into building energy consumption enables significant and sustainablearchitecture, to create actionable views of energy usages, which lead to significant and sustainablearchitecture for local energy generation, distribution, and sharing. IEEE Conference on Global Sustainable

  4. DSM shareholder incentives: Current designs and economic theory

    SciTech Connect (OSTI)

    Stoft, S.; Eto, J.; Kito, S.

    1995-01-01

    This report reviews recent DSM shareholder incentive designs and performance at 10 US utilities identifies opportunities for regulators to improve the design of DSM shareholder incentive mechanisms to increase the procurement of cost-effective DSM resources. We develop six recommendations: (1) apply shared-savings incentives to DSM resource programs; (2) use markup incentives for individual programs only when net benefits are difficult to measure, but are known to be positive; (3) set expected incentive payments based on covering a utility`s {open_quotes}hidden costs,{close_quotes} which include some transitional management and risk-adjusted opportunity costs; (4) use higher marginal incentives rates than are currently found in practice, but limit total incentive payments by adding a fixed charge; (5) mitigate risks to regulators and utilities by lowering marginal incentive rates at high and low performance levels; and (6) use an aggregate incentive mechanism for all DSM resource programs, with limited exceptions (e.g., information programs where markups are more appropriate).

  5. Case Studies in Using Whole Building Interval Data to Determine Annualized Electrical Savings

    E-Print Network [OSTI]

    Effinger, M.; Anthony, J.; Webster, L.

    2009-01-01

    % to 114% when compared to the measured method results. INTRODUCTION The use of whole building data to develop energy models as a method to ascertain energy savings has been researched for many years. This method has been detailed in the IPMVP... adoption of Option C is the length of monitoring time required to develop reliable regression models. To be IPMVP adherent, both pre- and post-implementation data must be collected over a period that covers the full reporting period (IPMVP, 2007...

  6. Clean Energy State Program Guide: Mainstreaming Solar Electricity Strategies for States to Build Local Markets

    Office of Energy Efficiency and Renewable Energy (EERE)

    A PV mapping tool visually represents a specific site and calculates PV system size and projected electricity production. This report identifies the commercially available solar mapping tools and thoroughly summarizes the source data type and resolution, the visualization software program being used, user inputs, calculation methodology and algorithms, map outputs, and development costs for each map.

  7. Energy Demands and Efficiency Strategies in Data Center Buildings

    E-Print Network [OSTI]

    Shehabi, Arman

    2010-01-01

    Appliance: Building 02 Datacenter. Pacific Gas and ElectricAppliance Building 11 Datacenter. Pacific Gas and Electric

  8. Buildings Energy Data Book: 6.2 Electricity Generation, Transmission, and Distribution

    Buildings Energy Data Book [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center HomeVehicle Replacement U.S. Residential and69 Energy747144 Electric

  9. U.S. electric utility demand-side management 1995

    SciTech Connect (OSTI)

    NONE

    1997-01-01

    The US Electric Utility Demand-Side Management report is prepared by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternative Fuels; Energy Information Administration (EIA); US Department of Energy. The report presents comprehensive information on electric power industry demand-side management (DSM) activities in the US at the national, regional, and utility levels. The objective of the publication is to provide industry decision makers, government policy makers, analysts, and the general public with historical data that may be used in understanding DSM as it relates to the US electric power industry. The first chapter, ``Profile: US Electric Utility Demand-Side Management``, presents a general discussion of DSM, its history, current issues, and a review of key statistics for the year. Subsequent chapters present discussions and more detailed data on energy savings, peak load reductions and costs attributable to DSM. 9 figs., 24 tabs.

  10. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    Figure9?Annualelectricityconsumptioncomparisonofthetotalannualelectricityconsumption,BuildingsAandBmostly measure electricity consumption, cooling loads,

  11. Automatic control of electric thermal storage (heat) under real-time pricing. Final report

    SciTech Connect (OSTI)

    Daryanian, B.; Tabors, R.D.; Bohn, R.E. [Tabors Caramanis and Associates, Inc. (United States)

    1995-01-01

    Real-time pricing (RTP) can be used by electric utilities as a control signal for responsive demand-side management (DSM) programs. Electric thermal storage (ETS) systems in buildings provide the inherent flexibility needed to take advantage of variations in prices. Under RTP, optimal performance for ETS operations is achieved under market conditions where reductions in customers` costs coincide with the lowering of the cost of service for electric utilities. The RTP signal conveys the time-varying actual marginal cost of the electric service to customers. The RTP rate is a combination of various cost components, including marginal generation fuel and maintenance costs, marginal costs of transmission and distribution losses, and marginal quality of supply and transmission costs. This report describes the results of an experiment in automatic control of heat storage systems under RTP during the winter seasons of 1989--90 and 1990--91.

  12. Garnering the Industrial Sector: A Comparison of Cutting Edge Industrial DSM Programs

    E-Print Network [OSTI]

    Kyricopoulos, P. F.; Wikler, G. A.; Faruqui, A.; Wood, B. G.

    1995-01-01

    The industrial sector has posed a daunting DSM challenge to utilities throughout North America, even to those with successful and creative residential and commercial DSM programs. Most utilities have had great difficulty ...

  13. Plug-in Electric Vehicle Interactions with a Small Office Building: An Economic Analysis using DER-CAM

    E-Print Network [OSTI]

    Momber, Ilan

    2010-01-01

    Environmental Benefits of Electric Vehicles Integration onusing plug-in hybrid electric vehicle battery packs for gridL ABORATORY Plug-in Electric Vehicle Interactions with a

  14. Microgrids: An emerging paradigm for meeting building electricity and heat requirements efficiently and with appropriate energy quality

    E-Print Network [OSTI]

    Marnay, Chris; Firestone, Ryan

    2007-01-01

    load electricity (kW) thermal storage storage charging non-avoidable electrical and thermal storage costs are set tototal electric load thermal storage solar thermal storage

  15. Plug-in Electric Vehicle Interactions with a Small Office Building: An Economic Analysis using DER-CAM

    E-Print Network [OSTI]

    Momber, Ilan

    2010-01-01

    Environmental Benefits of Electric Vehicles Integration onusing plug-in hybrid electric vehicle battery packs for gridwith Connection of Electric Vehicles TABLE IV D ECISION V

  16. Plug-in Electric Vehicle Interactions with a Small Office Building: An Economic Analysis using DER-CAM

    E-Print Network [OSTI]

    Momber, Ilan

    2010-01-01

    Effect of Heat and Electricity Storage and Reliability onIn the case of electricity storage, depending on storagea special case of electricity storage, already included in

  17. A Fresh Look at Weather Impact on Peak Electricity Demand and Energy Use of Buildings Using 30-Year Actual Weather Data

    SciTech Connect (OSTI)

    Hong, Tianzhen; Chang, Wen-Kuei; Lin, Hung-Wen

    2013-05-01

    Buildings consume more than one third of the world?s total primary energy. Weather plays a unique and significant role as it directly affects the thermal loads and thus energy performance of buildings. The traditional simulated energy performance using Typical Meteorological Year (TMY) weather data represents the building performance for a typical year, but not necessarily the average or typical long-term performance as buildings with different energy systems and designs respond differently to weather changes. Furthermore, the single-year TMY simulations do not provide a range of results that capture yearly variations due to changing weather, which is important for building energy management, and for performing risk assessments of energy efficiency investments. This paper employs large-scale building simulation (a total of 3162 runs) to study the weather impact on peak electricity demand and energy use with the 30-year (1980 to 2009) Actual Meteorological Year (AMY) weather data for three types of office buildings at two design efficiency levels, across all 17 ASHRAE climate zones. The simulated results using the AMY data are compared to those from the TMY3 data to determine and analyze the differences. Besides further demonstration, as done by other studies, that actual weather has a significant impact on both the peak electricity demand and energy use of buildings, the main findings from the current study include: 1) annual weather variation has a greater impact on the peak electricity demand than it does on energy use in buildings; 2) the simulated energy use using the TMY3 weather data is not necessarily representative of the average energy use over a long period, and the TMY3 results can be significantly higher or lower than those from the AMY data; 3) the weather impact is greater for buildings in colder climates than warmer climates; 4) the weather impact on the medium-sized office building was the greatest, followed by the large office and then the small office; and 5) simulated energy savings and peak demand reduction by energy conservation measures using the TMY3 weather data can be significantly underestimated or overestimated. It is crucial to run multi-decade simulations with AMY weather data to fully assess the impact of weather on the long-term performance of buildings, and to evaluate the energy savings potential of energy conservation measures for new and existing buildings from a life cycle perspective.

  18. The added economic and environmental value of plug-in electric vehicles connected to commercial building microgrids

    E-Print Network [OSTI]

    Stadler, Michael

    2010-01-01

    source or CHP system at the office building could be used toand CHP technologies installed in the office building areCHP during the morning or early afternoon and send it back to the office building

  19. The added economic and environmental value of plug-in electric vehicles connected to commercial building microgrids

    E-Print Network [OSTI]

    Stadler, Michael

    2010-01-01

    N. et al. , (2007), Microgrids, An Overview of Ongoingto commercial building microgrids Michael Stadler, Ilanto commercial building microgrids 1 Michael Stadler a,b) ,

  20. Please cite this article in press as: R.E. Edwards, et al., Predicting future hourly residential electrical consumption: A machine learning case study, Energy Buildings (2012), doi:10.1016/j.enbuild.2012.03.010

    E-Print Network [OSTI]

    Parker, Lynne E.

    2012-01-01

    electrical consumption: A machine learning case study, Energy Buildings (2012), doi:10.1016/j.enbuild.2012.03.010 ARTICLE IN PRESSG Model ENB-3661; No.of Pages13 Energy and Buildings xxx (2012) xxxxxx Contents lists available at SciVerse ScienceDirect Energy and Buildings journal homepage: www

  1. Determinants of residential electricity consumption: Using smart meter data to examine the effect of climate, building characteristics, appliance stock, and occupants' behavior

    SciTech Connect (OSTI)

    Kavousian, A; Rajagopal, R; Fischer, M

    2013-06-15

    We propose a method to examine structural and behavioral determinants of residential electricity consumption, by developing separate models for daily maximum (peak) and minimum (idle) consumption. We apply our method on a data set of 1628 households' electricity consumption. The results show that weather, location and floor area are among the most important determinants of residential electricity consumption. In addition to these variables, number of refrigerators and entertainment devices (e.g., VCRs) are among the most important determinants of daily minimum consumption, while number of occupants and high-consumption appliances such as electric water heaters are the most significant determinants of daily maximum consumption. Installing double-pane windows and energy-efficient lights helped to reduce consumption, as did the energy-conscious use of electric heater. Acknowledging climate change as a motivation to save energy showed correlation with lower electricity consumption. Households with individuals over 55 or between 19 and 35 years old recorded lower electricity consumption, while pet owners showed higher consumption. Contrary to some previous studies, we observed no significant correlation between electricity consumption and income level, home ownership, or building age. Some otherwise energy-efficient features such as energy-efficient appliances, programmable thermostats, and insulation were correlated with slight increase in electricity consumption. (C) 2013 Elsevier Ltd. All rights reserved.

  2. ELECTRIC

    Office of Legacy Management (LM)

    you nay give us will be greatly uppreckted. VPry truly your23, 9. IX. Sin0j3, Mtinager lclectronics and Nuclear Physics Dept. omh , WESTINGHOUSE-THE NAT KING IN ELECTRICITY...

  3. Please cite this article in press as: R.E. Edwards, et al., Predicting future hourly residential electrical consumption: A machine learning case study, Energy Buildings (2012), doi:10.1016/j.enbuild.2012.03.010

    E-Print Network [OSTI]

    Parker, Lynne E.

    2012-01-01

    electrical consumption: A machine learning case study, Energy Buildings (2012), doi:10.1016/j.enbuild.2012.elsevier.com/locate/enbuild Predicting future hourly residential electrical consumption: A machine learning case study Richard E electrical consumption data. In this article, we report on the evaluation of seven different machine learning

  4. Microgrids: An emerging paradigm for meeting building electricity and heat requirements efficiently and with appropriate energy quality

    E-Print Network [OSTI]

    Marnay, Chris; Firestone, Ryan

    2007-01-01

    electric load thermal storage solar thermal storage chargingcombustion solar thermal CHP heat storage charging generateof solar thermal collectors, 1100 kWh of electrical storage,

  5. Louisville Gas & Electric- Commercial Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Louisville Gas and Electric (LGE) offers rebates to all commercial customers who pay a DSM charge on monthly bills. Rebates are available on lighting measures, sensors, air conditioners, heat pumps...

  6. U.S. electric utility demand-side management 1996

    SciTech Connect (OSTI)

    1997-12-01

    The US Electric Utility Demand-Side Management report presents comprehensive information on electric power industry demand-side management (DSM) activities in the US at the national, regional, and utility levels. The objective of the publication is to provide industry decision makers, government policy makers, analysts, and the general public with historical data that may be used in understanding DSM as it related to the US electric power industry. The first chapter, ``Profile: U.S. Electric Utility Demand-Side Management,`` presents a general discussion of DSM, its history, current issues, and a review of key statistics for the year. Subsequent chapters present discussions and more detailed data on energy savings, peak load reductions and costs attributable to DSM. 9 figs., 24 tabs.

  7. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    battery Utility electricity consumption Electricity providedis expressed in electricity consumption of the electricis expressed in electricity consumption of the electric

  8. Microgrids: An emerging paradigm for meeting building electricity and heat requirements efficiently and with appropriate energy quality

    E-Print Network [OSTI]

    Marnay, Chris; Firestone, Ryan

    2007-01-01

    factors means the carbon footprint of commercial buildingscan accelerate lowering the carbon footprint of electricity

  9. Plug-in Electric Vehicle Interactions with a Small Office Building: An Economic Analysis using DER-CAM

    E-Print Network [OSTI]

    Momber, Ilan

    2010-01-01

    systems, power quality assessment and regulation, and economic and regulatory issues in the electrical

  10. Chapter 9: Commissioning the Building

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the con- struction materials such as durability and VOC emission content. It can improve power quality for the overall building by verifying that electrical building support and...

  11. Price Responsive Demand in New York Wholesale Electricity Market using OpenADR

    E-Print Network [OSTI]

    Kim, Joyce Jihyun

    2013-01-01

    months when buildings' electricity demand is also high dueoptimize buildings' electricity demand according to hourlymonths when buildings' electricity demand is also high due

  12. Statewide Emissions Reduction, Electricity and Demand Savings from the Implementation of Building-Energy-Codes in Texas

    E-Print Network [OSTI]

    Yazdani, B.; Haberl, J.; Kim, H.; Baltazar, J.C.; Zilbershtein, G.

    2012-01-01

    This paper focuses on the estimate of electricity reduction and electric demand savings from the adoption energy codes for single-family residences in Texas, 2002-2009, corresponding increase in cnstruction costs and estimates of the statewide...

  13. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability:A Study of Commercial Buildings in California and New York States

    SciTech Connect (OSTI)

    Stadler, Michael; Marnay, Chris; Siddiqui, Afzal; Lai, Judy; Coffey, Brian; Aki, Hirohisa

    2008-12-01

    In past work, Berkeley Lab has developed the Distributed Energy Resources Customer Adoption Model (DER-CAM). Given end-use energy details for a facility, a description of its economic environment and a menu of available equipment, DER-CAM finds the optimal investment portfolio and its operating schedule which together minimize the cost of meeting site service, e.g., cooling, heating, requirements. Past studies have considered combined heat and power (CHP) technologies. Methods and software have been developed to solve this problem, finding optimal solutions which take simultaneity into account. This project aims to extend on those prior capabilities in two key dimensions. In this research storage technologies have been added as well as power quality and reliability (PQR) features that provide the ability to value the additional indirect reliability benefit derived from Consortium for Electricity Reliability Technology Solutions (CERTS) Microgrid capability. This project is intended to determine how attractive on-site generation becomes to a medium-sized commercial site if economical storage (both electrical and thermal), CHP opportunities, and PQR benefits are provided in addition to avoiding electricity purchases. On-site electrical storage, generators, and the ability to seamlessly connect and disconnect from utility service would provide the facility with ride-through capability for minor grid disturbances. Three building types in both California and New York are assumed to have a share of their sensitive electrical load separable. Providing enhanced service to this load fraction has an unknown value to the facility, which is estimated analytically. In summary, this project began with 3 major goals: (1) to conduct detailed analysis to find the optimal equipment combination for microgrids at a few promising commercial building hosts in the two favorable markets of California and New York; (2) to extend the analysis capability of DER-CAM to include both heat and electricity storage; and (3) to make an initial effort towards adding consideration of PQR into the capabilities of DER-CAM.

  14. Proposal for the award of a contract for the supply and laying of false floors in the rectifier buildings and the electricity sub-stations serving five LEP access points

    E-Print Network [OSTI]

    1986-01-01

    Proposal for the award of a contract for the supply and laying of false floors in the rectifier buildings and the electricity sub-stations serving five LEP access points

  15. Proposal for the award of a service contract for the operation, maintenance and other work relating to the low-voltage electrical facilities of CERNs non- machine buildings

    E-Print Network [OSTI]

    2011-01-01

    Proposal for the award of a service contract for the operation, maintenance and other work relating to the low-voltage electrical facilities of CERNs non- machine buildings

  16. ELECTRIC

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouth DakotaRobbins and Myers CoMadison -T: Designation ofSEPE.ELECTRIC

  17. Plug-in Electric Vehicle Interactions with a Small Office Building: An Economic Analysis using DER-CAM

    E-Print Network [OSTI]

    Momber, Ilan

    2010-01-01

    and P. Chapman, Using Microgrids as a Path Towards Smartof Commercial Building Microgrids, IEEE Transactions onsources and sinks, or microgrids. In prior research, many

  18. Plug-in Electric Vehicle Interactions with a Small Office Building: An Economic Analysis using DER-CAM

    E-Print Network [OSTI]

    Momber, Ilan

    2010-01-01

    workdays. Index Terms-- battery storage, building managementvehicle battery packs for grid storage, J. of Powerstorage but not to consume any net energy from the battery.

  19. Electric Utility Measurement & Verification Program

    E-Print Network [OSTI]

    Lau, K.; Henderson, G.; Hebert, D.

    2007-01-01

    . Therefore, if the flow fluctuates from what is required, the gas must be recycled. The M&V technique used for this project was Option B, Metering. The analysis was based on liquid flow data and motor current data (used as a ESL-IE-07... is an electric utility with a service area covering over 95% of the province of British Columbia in Canada. Power Smart is BC Hydro?s demand-side-management (DSM) division. Power Smart develops, operates and manages various DSM programs for residential...

  20. CO2 Capture Using Electric Fields: Low-Cost Electrochromic Film on Plastic for Net-Zero Energy Building

    SciTech Connect (OSTI)

    None

    2010-01-01

    Broad Funding Opportunity Announcement Project: Two faculty members at Lehigh University created a new technique called supercapacitive swing adsorption (SSA) that uses electrical charges to encourage materials to capture and release CO2. Current CO2 capture methods include expensive processes that involve changes in temperature or pressure. Lehigh Universitys approach uses electric fields to improve the ability of inexpensive carbon sorbents to trap CO2. Because this process uses electric fields and not electric current, the overall energy consumption is projected to be much lower than conventional methods. Lehigh University is now optimizing the materials to maximize CO2 capture and minimize the energy needed for the process.

  1. Expanding the Autism Ontology to DSM-IV Criteria Omri Mugzach1

    E-Print Network [OSTI]

    Peleg, Mor

    Expanding the Autism Ontology to DSM-IV Criteria Omri Mugzach1 , BA; Mor Peleg1 , PhD; Steven C to understand the environmental and genetic factors contributing to autism, we are extending an existing Autism and the DSM-IV criteria. Background: The mechanism of autism is unknown, and it is critical to organize

  2. A DSM Cluster Architecture Supporting Aggressive Computation in Active Peter Graham

    E-Print Network [OSTI]

    Graham, Peter

    path. The use of DSM simplifies the imple- mentation, and extends the capabilities, of the activeA DSM Cluster Architecture Supporting Aggressive Computation in Active Networks Peter Graham Winnipeg, Manitoba, Canada R3T 2N2 pgraham@cs.umanitoba.ca Abstract Active networks allow computations

  3. The added economic and environmental value of plug-in electric vehicles connected to commercial building microgrids

    E-Print Network [OSTI]

    Stadler, Michael

    2010-01-01

    could be used to offset EV charging at home. It is assumedcan be expected by charging EV batteries at home during theoffice building EV battery charging efficiency EV battery

  4. Mechanical and Electrical Systems for the Tallest Building/Man-Made Structure in the World: A Burj Dubai Case Study

    E-Print Network [OSTI]

    Frechette, R.; Leung, L.; Boyer, J.

    2006-01-01

    , such as reverse stack effect mitigation, will also be addressed. Integral to best design practice was the integration of sustainable strategies to the base building services. These strategies include a condensate recovery system, heat pipes, heat wheels... for energy recovery, use of high performance glass, and a ventilated double wall facade in the entry pavilions were all integral aspects of the final design. GENERAL BUILDING DESCRIPTION Upon completion, the Burj Dubai designed and engineered...

  5. Public Assembly Buildings

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    as "primary energy," which includes the energy consumed during the generation and transmission of electricity. Public assembly buildings used 577 trillion Btu of primary...

  6. Building & Fire Assist Director

    E-Print Network [OSTI]

    Buren Physical Safety (Electrical, Confined Space, Machinery, Fall Prevention) Construction & Remodel Design Review Lab / Shop Safety Surveys Regulated Building Materials Public Health (Food, Water, Pests

  7. Building Emergency Plan

    E-Print Network [OSTI]

    Physical Facilities

    2013-11-12

    Aug 30, 2013 ... the building for electricity to be restored, they can move near a window where there is natural light and access to a working telephone. During...

  8. Building Commissioning in the Chinese Mainland

    E-Print Network [OSTI]

    Zhu, Y.

    2006-01-01

    Governmental buildingsGovernmental buildings Building InformationBuilding Information Electric chiller ( FCU, AHU )Electric chiller ( FCU, AHU ) 29302930 18001800 39, 60039, 600 JJGasGas--burned Heat Absorption Chiller (FCU)burned Heat Absorption Chiller (FCU...)2456245660060041, 51041, 510GGGasGas--burned Heat Absorption Chiller + Electric chiller burned Heat Absorption Chiller + Electric chiller (FCU)(FCU)65326532>800>80050, 00050, 000HH Electric chiller ( FCU, AHU )Electric chiller ( FCU, AHU ) 47004700 560560 45, 45045...

  9. THE CO2 ABATEMENT POTENTIAL OF CALIFORNIA'S MID-SIZED COMMERCIAL BUILDINGS

    E-Print Network [OSTI]

    Stadler, Michael

    2010-01-01

    Electricity Generation from CHP by Building Types, Referenceimpact of mid-sized building CHP systems on CO 2 emissions.Electricity Generation from CHP by Building Types, Reference

  10. Microgrids: An emerging paradigm for meeting building electricity and heat requirements efficiently and with appropriate energy quality

    E-Print Network [OSTI]

    Marnay, Chris; Firestone, Ryan

    2007-01-01

    Venkataramanan, 2006, Microgrids in the Evolving ElectricityN ATIONAL L ABORATORY Microgrids: An emerging paradigm forFrance, 4-9 June 2007 Microgrids: An emerging paradigm for

  11. RESCHEDULED: Webinar on Material Handling Fuel Cells for Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RESCHEDULED: Webinar on Material Handling Fuel Cells for Building Electric Peak Shaving Applications RESCHEDULED: Webinar on Material Handling Fuel Cells for Building Electric Peak...

  12. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    charging kW Utility electricity consumption Electricityis expressed in electricity consumption of the electricis expressed in electricity consumption of the electric

  13. A Fresh Look at Weather Impact on Peak Electricity Demand and Energy Use of Buildings Using 30-Year Actual Weather Data

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    DB. Weather data for building performance simulation.forecast models, weather data, and building prototypes havethe TMY3 weather data in building simulations to evaluate

  14. Building Technologies Research and

    E-Print Network [OSTI]

    Pennycook, Steve

    Impact of Buildings Centers of Excellence 40% of total primary energy consumption 74% of electricity consumption 56% of natural gas consumption (including gas-generated electricity used in buildings) 39 the nation accounts for its energy consumption, making the energy savings potential even greater. National

  15. Investigation and Analysis of Energy Consumption and Cost of Electric Air Conditioning Systems in Civil Buildings in Changsha

    E-Print Network [OSTI]

    Xie, D.; Chen, J.; Zhang, G.; Zhang, Q.

    2006-01-01

    based on the electric refrigeration. Among the heat sources, the prospect of gas boilers is better. In addition, the air source heat pump depends heavily on whether some crucial issues such as frost can be solved during its application. The water...

  16. Whether it's designing rehabilitation strategies involving electricity to `retrain' damaged nerves, developing optical imaging systems to build

    E-Print Network [OSTI]

    Whether it's designing rehabilitation strategies involving electricity to `retrain' damaged nerves-ready rehabilitation products is only part of the equation. As part of her CARE (CREATE Academic Rehabilitation in the commercialization of two important rehabilitation products for the Staxi Corporation.Working out of the iDAPT `Home

  17. Modeling Electric Vehicle Benefits Connected to Smart Grids

    E-Print Network [OSTI]

    Stadler, Michael

    2012-01-01

    reflect the benefit of electricity demand displacement bystorage electricity supplied by EVs electricity demand fromthe building electricity demand from local storage

  18. Baltimore Gas & Electric Company (Electric) - Residential Energy...

    Broader source: Energy.gov (indexed) [DOE]

    DuctAir sealing Building Insulation Other EE LED Lighting Maximum Rebate Contact Baltimore Gas and Electric Program Info Sector Name Utility Website http:...

  19. Industrial DSM Programs: Low-Cost Resource and Smart Customer Service

    E-Print Network [OSTI]

    Jaussaud, D.

    1994-01-01

    Demand-side management (DSM) is a resource that helps utilities use their system more efficiently and/or postpone the need for expensive new plant construction. But demand-side management also has another function. By ...

  20. An improved procedure for developing a calibrated hourly simulation model of an electrically heated and cooled commercial building

    E-Print Network [OSTI]

    Bou-Saada, Tarek Edmond

    1994-01-01

    Sections . . . . 85 4. 7 Daycare Center . . . . . . . 86 4, 8 Sun Angle Calculator and Altitude Measurement Device . . . 4. 9 Photovoltaic and Domestic Hot Water Solar Panels. . . . . . . . . . 92 4. 10 Heating, Ventilating, and Air... and Daily Minutes of Sunshine . . . . . . . I 1 5 4. 18 Sky Clearness and Daily Percent Possible Sunshine . . . . . . . . 116 4. 19 Hourly Photovoltaic Electricity and Hourly Solar Radiation. . . . . . . . . . 1 1 8 4. 20 Solar Data Example . . . . . 121...

  1. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    SciTech Connect (OSTI)

    Stadler, Michael; Marnay, Chris; Siddiqui, Afzal; Lai, Judy; Coffey, Brian; Aki, Hirohisa

    2009-03-10

    Berkeley Lab has for several years been developing methods for selection of optimal microgrid systems, especially for commercial building applications, and applying these methods in the Distributed Energy Resources Customer Adoption Model (DER-CAM). This project began with 3 major goals: (1) to conduct detailed analysis to find the optimal equipment combination for microgrids at a few promising commercial building hosts in the two favorable markets of California and New York, (2) to extend the analysis capability of DER-CAM to include both heat and electricity storage, and (3) to make an initial effort towards adding consideration of power quality and reliability (PQR) to the capabilities of DER-CAM. All of these objectives have been pursued via analysis of the attractiveness of a Consortium for Electric Reliability Technology Solutions (CERTS) Microgrid consisting of multiple nameplate 100 kW Tecogen Premium Power Modules (CM-100). This unit consists of an asynchronous inverter-based variable speed internal combustion engine genset with combined heat and power (CHP) and power surge capability. The essence of CERTS Microgrid technology is that smarts added to the on-board power electronics of any microgrid device enables stable and safe islanded operation without the need for complex fast supervisory controls. This approach allows plug and play development of a microgrid that can potentially provide high PQR with a minimum of specialized site-specific engineering. A notable feature of the CM-100 is its time-limited surge rating of 125 kW, and DER-CAM capability to model this feature was also a necessary model enhancement.

  2. A Fresh Look at Weather Impact on Peak Electricity Demand and Energy Use of Buildings Using 30-Year Actual Weather Data

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    reduction of peak electricity demand, and percentage savingsvariables and monthly electricity demand. Applied Energychanges of peak electricity demand. (a) large office, 90.1-

  3. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    ES 2. CA nursing home electricity pattern: July weekday lowJanuary and July weekday electricity and total heat (space +CA school weekday total electricity (inclusive of cooling)

  4. CIV498 Design Project Winter 2016 Project Title: Building Science (Sustainable building design and energy

    E-Print Network [OSTI]

    Toronto, University of

    emissions from burning fossil fuels at buildings and at thermal electrical generation for building in the building's thermal envelope and electrical consuming systems up front to minimize thermal and electrical Building-as-a-System principles. Using a basic architectural design provided the students will work

  5. Buildings Stock Load Control

    E-Print Network [OSTI]

    Joutey, H. A.; Vaezi-Nejad, H.; Clemoncon, B.; Rosenstein, F.

    2006-01-01

    , Shenzhen, China Building Commissioning for Energy Efficiency and Comfort, Vol.VI-9-4 Buildings Stock Load Control Ms H. Amrani Joutey Mr H. Vaezi-Nejad Mr B. Clemonon Mr F.Rosenstein PHD student Research engineer Research... electricity consumption and curtail peak demand but in local form: building by building. Few developments are carried out for multi sites management. Multi sites management is essential in crisis and/or peak periods (large energy demand in particular during...

  6. Electricity pricing as a demand-side management strategy: Western lessons for developing countries

    SciTech Connect (OSTI)

    Hill, L.J.

    1990-12-01

    Electric utilities in the Western world have increasingly realized that load commitments can be met not only by constructing new generating plants but also by influencing electricity demand. This demand-side management (DSM) process requires that electric utilities promote measures on the customer's side of the meter to directly or indirectly influence electricity consumption to meet desired load objectives. An important demand-side option to achieve these load objectives is innovative electricity pricing, both by itself and as a financial incentive for other demand-site measures. This study explores electricity pricing as a DSM strategy, addressing four questions in the process: What is the Western experience with DSM in general and electricity pricing in particular Do innovative pricing strategies alter the amount and pattern of electricity consumption Do the benefits of these pricing strategies outweigh the costs of implementation What are future directions in electricity pricing Although DSM can be used to promote increases in electricity consumption for electric utilities with excess capacity as well as to slow demand growth for capacity-short utilities, emphasis here is placed on the latter. The discussion should be especially useful for electric utilities in developing countries that are exploring alternatives to capacity expansion to meet current and future electric power demand.

  7. Building a Smarter Distribution System in Pennsylvania

    Office of Environmental Management (EM)

    Study - PPL Electric Utilities Corporation Smart Grid Investment Grant 1 Building a Smarter Distribution System in Pennsylvania PPL Electric Utilities Corporation (PPL) provides...

  8. TO: Deans, Directors and Building Coordinators FROM: Dennis Kamite

    E-Print Network [OSTI]

    Dong, Yingfei

    to perform maintenance and repair electrical switchgear providing power to the Art Building and Sakamaki Hall

  9. Model Predictive Control for Energy Efficient Buildings

    E-Print Network [OSTI]

    Ma, Yudong

    2012-01-01

    solar radiation, occupancy, and electrical devices in the buildings as a function of weather information, time, and date.solar radiation, occupancy, and electrical devices in the buildings as a function of weather information, time, and date.

  10. Finding the creatures of habit; Clustering households based on their flexibility in using electricity

    E-Print Network [OSTI]

    Aickelin, Uwe

    , actionable groupings are found. Keywords Electricity load profiles, Clustering, Flexibility, Demand Side on the electricity network is the application of Demand Side Management (DSM) techniques to achieve changes electricity Ian Dent, Uwe Aickelin and Tom Rodden School of Computer Science University of Nottingham

  11. Progress in the standardization of DSM terminology, reporting formats, and evaluation protocols

    SciTech Connect (OSTI)

    Berry, L.

    1994-10-01

    Evaluations of demand-side management programs are numerous and serve many purposes: assessing effectiveness, promoting program improvements, guiding planning processes, and determining the level of shareholder incentives. Although many program evaluations are available, it is difficult to combine or compare results because of inconsistencies in definitions, reporting formats, and evaluation methods. The increased use of explicit and standardized definitions of terms, consistent data reporting formats, and comparable methods is needed to make combining and comparing results across a range of programs, utilities, and state jurisdictional boundaries possible. Producing consistent and accurate comparisons of program experience is an important, although challenging and, therefore, under utilized, means of identifying the key elements of effective programs and of improving future programs. In spite of the importance of arriving at standard terminology and data reporting conventions, progress is slow. The purpose of this report is to assess progress toward standardization by reviewing attempts to promote standardization and by determining the degree of consistency in various sources. There are a number of efforts to promote standardization including regional utility efforts such as Northeast Regional DSM Data Exchange and NU-Trak in the Pacific Northwest, state regulatory commission requirements, and Lawrence Berkeley Laboratory and Oak Ridge National Laboratory databases and publications, which are national in scope. A variety of other organizations such as the Association of Demand-Side Management Professionals, the Electric Power Research Institute, the National Association of Regulatory Utility Commissioners, the Energy Information Administration, the Synergic Resources Corporation, the Environmental Protection Agency, and the National Association of Energy Service Companies have publications and/or training courses designed to promote greater standardization.

  12. Transmission grid extensions during the build-up of a fully renewable pan-European electricity supply

    E-Print Network [OSTI]

    Becker, Sarah; Andresen, Gorm B; Schramm, Stefan; Greiner, Martin

    2013-01-01

    Spatio-temporal generation patterns for wind and solar photovoltaic power in Europe are used to investigate the future rise in transmission needs with an increasing penetration of these variable renewable energy sources (VRES) on the pan-European electricity system. VRES growth predictions according to the official National Renewable Energy Action Plans of the EU countries are used and extrapolated logistically up to a fully VRES-supplied power system. We find that keeping today's international net transfer capacities (NTCs) fixed over the next forty years reduces the final need for backup energy by 13% when compared to the situation with no NTCs. An overall doubling of today's NTCs will lead to a 26% reduction, and an overall quadrupling to a 33% reduction. The remaining need for backup energy is due to correlations in the generation patterns, and cannot be further reduced by transmission. The main investments in transmission lines are due during the ramp-up of VRES from 15% (as planned for 2020) to 80%. Add...

  13. OVERVIEW OF CAMPUS ELECTRICAL SYSTEMS

    E-Print Network [OSTI]

    OVERVIEW OF CAMPUS ELECTRICAL SYSTEMS University of Minnesota #12;Energy Management Principles 4 Electrical Engineers Buildings Services (~220) Manholes (~400) Cable Ductbank 130 Generators efficient opportunities and balance upfront investment costs with long-term savings potential 1 #12;Electric

  14. Federal Buildings Supplemental Survey 1993

    U.S. Energy Information Administration (EIA) Indexed Site

    3. Consumption and Expenditures for Sum of Major Fuels, Electricity, and Natural Gas in FBSS Buildings in Federal Region 3, 1993 Sum of Sum of Major Major Electricity Natural...

  15. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    TK Effect of Heat and Electricity Storage and Reliability oninclude both heat and electricity storage, and 3. to make anIn this case, electricity storage costs are reduced from 193

  16. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    forms/instr63a.pdf Electricity Storage Association, MorganEffect of Heat and Electricity Storage and Reliability onEffect of Heat and Electricity Storage and Reliability on

  17. Utility DSM Rebates for electronic ballasts: National estimates and assessment of market impact (1992 - 1997)

    SciTech Connect (OSTI)

    Busch, C.B.; Atkinson, B.A.; Eto, J.H.; Turiel, I.; McMahon, J.E.

    2000-06-30

    In this report we present national estimates of utility Demand-Side Management (DSM) rebates for electronic fluorescent lamp ballasts during the period of 1992 - 1997. We then compare these trends with developments in the fluorescent ballast market from 1993 - 1998. The analysis indicates that DSM rebates for electronic ballasts peaked in the mid-1990s and declined sharply in 1996 and 1997. In a parallel trend, electronic ballast sales and market share both increased significantly during 1993 - 1994 and increased more slowly in 1996 -1997.

  18. Strategy for Designing DSM Program after the Restructuring in Korea

    E-Print Network [OSTI]

    Rhee, C.; Lee, K.; Jo, I.

    2002-01-01

    -use and interrupt load by pre-determined procedures, if necessary. This analysis shows that electricity boiler, pump, blower, HVAC can save energy during some time. In addition, developing system to monitor end-use load and interconnecting it with MOS...

  19. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    with Electric and Thermal Storage Technologies, ACEEE 2008CAM 5 decoupling by thermal storage decoupling by electric2007. Please note that thermal storage contains also heat

  20. Optimizing Building Energy Use Objective: Perform a comprehensive energy audit of a targeted New York City building,

    E-Print Network [OSTI]

    Wolberg, George

    Optimizing Building Energy Use Objective: Perform a comprehensive energy audit of a targeted New York City building, identify inefficiencies, recommend modifications to improve energy efficiency, electricity-generation method, and the energy efficiency of buildings. Building energy efficiency determines

  1. Table C10. Electricity Consumption and Expenditure Intensities...

    U.S. Energy Information Administration (EIA) Indexed Site

    Electricity Consumption and Expenditure Intensities, 1999" ,"Electricity Consumption",,,,,,"Electricity Expenditures" ,"per Building (thousand kWh)","per Square Foot (kWh)","per...

  2. Abstract--Implementation of Distribution Automation (DA) and Demand Side Management (DSM) intended to serve both

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    by the distribution utility for the security. REMPLI (Remote Energy Management over Power Lines and Internet) system of distribution network. They should be monitored and controlled in DA system. The load monitoring and estimationAbstract--Implementation of Distribution Automation (DA) and Demand Side Management (DSM) intended

  3. Complete Genome Sequence of the Cellulolytic Thermophile Clostridium thermocellum DSM1313

    SciTech Connect (OSTI)

    Feinberg, Lawrence F [ORNL; Foden, Justine [Mascoma Corporation; Barrett, Trisha [Mascoma Corporation; Davenport, Karen W. [Los Alamos National Laboratory (LANL); Bruce, David [Los Alamos National Laboratory (LANL); Detter, J. Chris [U.S. Department of Energy, Joint Genome Institute; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Han, Cliff [Los Alamos National Laboratory (LANL); Lapidus, Alla L. [U.S. Department of Energy, Joint Genome Institute; Lucas, Susan [U.S. Department of Energy, Joint Genome Institute; Cheng, Jan-Fang [U.S. Department of Energy, Joint Genome Institute; Pitluck, Sam [U.S. Department of Energy, Joint Genome Institute; Woyke, Tanja [U.S. Department of Energy, Joint Genome Institute; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mikhailova, Natalia [U.S. Department of Energy, Joint Genome Institute; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Argyros, Aaron [Mascoma Corporation; Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Hogsett, David [Mascoma Corporation; Caiazza, Nicky [Mascoma Corporation

    2011-01-01

    Clostridium thermocellum DSM1313 is a thermophilic, anaerobic bacterium with some of the highest rates of cellulose hydrolysis reported. The complete genome sequence reveals a suite of carbohydrate-active enzymes and demonstrates a level of diversity at the species level distinguishing it from the type strain ATCC27405.

  4. A framework for improving the cost-effectiveness of DSM program evaluations

    SciTech Connect (OSTI)

    Sonnenblick, R.; Eto, J.

    1995-09-01

    The prudence of utility demand-side management (DSM) investments hinges on their performance, yet evaluating performance is complicated because the energy saved by DSM programs can never be observed directly but only inferred. This study frames and begins to answer the following questions: (1) how well do current evaluation methods perform in improving confidence in the measurement of energy savings produced by DSM programs; (2) in view of this performance, how can limited evaluation resources be best allocated to maximize the value of the information they provide? The authors review three major classes of methods for estimating annual energy savings: tracking database (sometimes called engineering estimates), end-use metering, and billing analysis and examine them in light of the uncertainties in current estimates of DSM program measure lifetimes. The authors assess the accuracy and precision of each method and construct trade-off curves to examine the costs of increases in accuracy or precision. Several approaches for improving evaluations for the purpose of assessing program cost effectiveness are demonstrated. The methods can be easily generalized to other evaluation objectives, such as shared savings incentive payments.

  5. Case Study - National Rural Electric Cooperative Association...

    Office of Environmental Management (EM)

    National Rural Electric Cooperative Association Smart Grid Investment Grant 1 Helping America's Electric Cooperatives Build a Smarter Grid to Streamline Operations and Improve...

  6. EMCS and time-series energy data analysis in a large government office building

    E-Print Network [OSTI]

    Piette, Mary Ann; Kinney, Satkartar; Friedman, Hannah

    2001-01-01

    and analyze building performance data (Sebald and Pietteevaluating the building's operations data. The objective offrom the whole-building electric data is the temperature

  7. EESRD | Electrical and Electronics Systems Research Division...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supporting Organizations Biosciences Division Energy and Transportation Science Division Electrical and Electronics Systems Research Division Building Technologies Program...

  8. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    2003. Hatziargyriou, N. et al. , Microgrids, An Overview ofand Operation of Microgrids in Commercial Buildings, IEEEequipment combination for microgrids at a few promising

  9. Building Stones

    E-Print Network [OSTI]

    2012-01-01

    3). Photographs by the author. Building Stones, Harrell, UEEOxford Short Citation: Harrell, 2012, Building Stones. UEE.Harrell, James A. , 2012, Building Stones. In Willeke

  10. Comparison of building energy use data between the United States and China

    E-Print Network [OSTI]

    Xia Ph.D., Jianjun

    2014-01-01

    pipes, etc. Annual Electricity Consumption Comparison OtherFig. 7. Annual electricity consumption comparison of case-the total annual electricity consumption, Buildings A and B

  11. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    optimal could be acquired. Battery storage costs are roughlylead/acid battery) and thermal storage, capabilities, withcell electric storage heat storage flow battery abs. chiller

  12. Type A Accident Investigation Board Report on the July 11, 1996, Electrical Shock at Technical Area 53, Building MPF-14, Los Alamos National Laboratory

    Broader source: Energy.gov [DOE]

    This report is an independent product of an electrical shock accident investigation board appointed by Bruce G. Twining, Manager, Albuquerque Operations Office, Department of Energy.

  13. A Fresh Look at Weather Impact on Peak Electricity Demand and Energy Use of Buildings Using 30-Year Actual Weather Data

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    vs. synthesized energy modeling weather files. Journal ofHong TZ, Jiang Y. Stochastic weather model for building HVAC1. [9] Crawley DB. Which weather data should you use for

  14. Rice University Electrical and Computer Engineering Neuroengineering

    E-Print Network [OSTI]

    Natelson, Douglas

    Rice University Electrical and Computer Engineering Neuroengineering Learn more at ece Electrical and Computer Engineering Neuroengineering Faculty Learn more at ece.rice.edu Caleb Kemere, Assistant Professor, Electrical and Computer Engineering Research Interests: Building interfaces with memory

  15. TOLEDO BETTERS BUILDINGS WITH FINANCING OPTIONS | Department...

    Energy Savers [EERE]

    drop in business activity associated with the nationwide recession. With utility prices for electricity and natural gas at record lows, building energy efficiency...

  16. Effect of Heat and Electricity Storage and Reliability on Microgrid Viability: A Study of Commercial Buildings in California and New York States

    E-Print Network [OSTI]

    Stadler, Michael

    2009-01-01

    with Electric and Thermal Storage Technologies, ACEEE 2008DER-CAM decoupling by thermal storage decoupling by electricor $/kWh) lifetime (a) thermal storage 1 flow battery 220$/

  17. Building load control and optimization

    E-Print Network [OSTI]

    Xing, Hai-Yun Helen, 1976-

    2004-01-01

    Researchers and practitioners have proposed a variety of solutions to reduce electricity consumption and curtail peak demand. This research focuses on load control by improving the operations in existing building HVAC ...

  18. Commercial Buildings | Department of Energy

    Energy Savers [EERE]

    of electricity consumption in U.S. commercial buildings. A new breakthrough by the Energy Department's National Renewable Energy Lab could help...

  19. BUILDING NAMES AA Architecture Building

    E-Print Network [OSTI]

    Dawson, Jeff W.

    P18$ P16 BUILDING NAMES AA Architecture Building AC Recreation and Athletics Centre AH Alumni Hall AP Azrieli Pavillion AT Azrieli Theatre CB Canal Building CO Residence Commons DT Dunton Tower FH Interaction Building (HCI) HP Herzberg Laboratories IH Ice House LA Loeb Building LE Leeds House LH Lanark

  20. Estimation of Building Parameters Using Simplified Energy Balance Model and Metered Whole Building Energy Use

    E-Print Network [OSTI]

    Masuda, H.; Claridge, D.

    2012-01-01

    This paper presents and evaluates an indirect data-driven method to estimate influential building parameters: air exchange rates and overall heat transfer coefficients of building envelopes from the separately metered energy use for electricity...

  1. Commissioning-Oriented Building Loads Calculations. Application to the CA-MET Building in Namur (Belgium)

    E-Print Network [OSTI]

    Adam, C.; Andre, P.; Aparecida Silva, C.; Hannay, J.; Lebrun, J.

    2004-01-01

    The parallel use of whole building simulation and monitoring of building energy consumptions (heating, cooling, lighting and other electricity consumptions) represents a potential high-level commissioning tool in order to verify, either as a one...

  2. Electrical Demand Control

    E-Print Network [OSTI]

    Eppelheimer, D. M.

    1984-01-01

    Almost every building owner or manager is interested in controlling electrical costs. Since the HVAC system is a large user of electricity, this article will discuss what can be done in the HVAC system to influence parts of the utility bill....

  3. West Lafayette Campus Building names and aBBreviations

    E-Print Network [OSTI]

    Jiang, Wen

    aerospace science laboratory C11 AGAD agricultural administration Building G8 AHF animal Holding Facility G Clubhouse C1 EE electrical engineering Building H6 EEL entomology environmental laboratory G8 EHSA equine Flight operations Building B11 FORS Forestry Building G8 FPRD Forest Products Building G8 FREH Freehafer

  4. Sixth Northwest Conservation and Electric Power Plan Appendix F: Model Conservation Standards

    E-Print Network [OSTI]

    .................................................................................................................. 2 Utility Conservation Programs for New Residential Buildings buildings, the standard for utility residential conservation programs, the standard for all new commercial......................................................................................................................................... 1 New Site Built Electrically Heated Residential Buildings and New Electrically Heated Manufactured

  5. $18.8 Million Award for Power Systems Engineering Research Center Continues Collaboration of 13 Universities and 35 Utilities for Electric Power Research, Building the Nation's Energy Workforce

    Broader source: Energy.gov [DOE]

    The Department of Energy awarded a cooperative agreement on January 16, 2009, to the Arizona State University (ASU) Board of Regents to operate the Power Systems Engineering Research Center (PSERC). PSERC is a collaboration of 13 universities with 35 electricity industry member organizations including utilities, transmission companies, vendors and research organizations.

  6. DSM Program Development. The demand-side resource options were developed using a combination of internal engineering estimates and external consulting services. The

    E-Print Network [OSTI]

    for the determination of the optimum program level to be included in the IRP. The demand-side management options wereDSM Program Development. The demand-side resource options were developed using a combination Practices Manual: Economic Analysis of Demand-side Programs and Projects.2 The proposed DSM programs

  7. Computational Needs for the Next Generation Electric Grid Proceedings

    E-Print Network [OSTI]

    Birman, Kenneth

    2012-01-01

    the computing needsforbuildingthissmartgrid, andusingthecloudforbuildingthesmartgrid. 4.1Therequirements for building successful smart electric

  8. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  9. Building technologies

    SciTech Connect (OSTI)

    Jackson, Roderick

    2014-07-14

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  10. Building technologies

    ScienceCinema (OSTI)

    Jackson, Roderick

    2014-07-15

    After growing up on construction sites, Roderick Jackson is now helping to make buildings nationwide far more energy efficient.

  11. Building Energy Optimization Analysis Method (BEopt) - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Optimization Analysis Method (BEopt) - Building America Top Innovation Building Energy Optimization Analysis Method (BEopt) - Building America Top Innovation House...

  12. Beardmore Building

    High Performance Buildings Database

    Priest River, ID Originally built in 1922 by Charles Beardmore, the building housed offices, mercantile shops, a ballroom and a theater. After decades of neglect under outside ownership, Brian Runberg, an architect and great-grandson of Charles Beardmore, purchased the building in 2006 and began an extensive whole building historic restoration.

  13. Generators for Small Electrical and Thermal Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    build and test improved electric-power generators for use in residential Combined Heat and Power (CHP) systems, which capture the generator's heat output for space and water...

  14. Notices ADDRESSES: National Rural Electric Cooperative Association...

    Broader source: Energy.gov (indexed) [DOE]

    of Electricity Delivery and Energy Reliability, U.S. Department of Energy, Forrestal Building, Room 8G-017, 1000 Independence Avenue SW., Washington, DC 20585; Telephone:...

  15. Renewable Energy Applications for Existing Buildings: Preprint

    SciTech Connect (OSTI)

    Hayter, S. J.; Kandt, A.

    2011-08-01

    This paper introduces technical opportunities, means, and methods for incorporating renewable energy (RE) technologies into building designs and operations. It provides an overview of RE resources and available technologies used successfully to offset building electrical and thermal energy loads. Methods for applying these technologies in buildings and the role of building energy efficiency in successful RE projects are addressed along with tips for implementing successful RE projects.

  16. Utility Building Analysis Billing Period: NOV -2013

    E-Print Network [OSTI]

    ELECTRICITY Consumption MUNICIPAL WATER Consumption 8 CCF STEAM Consumption CHILLED WATER Consumption GAS Building Analysis Billing Period: NOV - 2013 032 JACKSON HALL: 150,393 Square Feet ELECTRICITY Consumption,550 Square Feet ELECTRICITY Consumption 114,185 KWHRS MUNICIPAL WATER Consumption 1,423 CCF STEAM Consumption

  17. Hawaii demand-side management resource assessment. Final report, Reference Volume 2: Final residential and commercial building prototypes and DOE-2.1E developed UECs and EUIs; Part 3

    SciTech Connect (OSTI)

    1995-04-01

    This section contains the detailed measured impact results and market segment data for each DSM case examined for this building type. A complete index of all base and measure cases defined for this building type is shown first. This index represents an expansion of the base and measure matrix presented in Table 1 (residential) or Table 2 (commercial) for the applicable sector. Following this index, a summary report sheet is provided for each DSM measure case in the order shown in the index. The summary report sheet contains a host of information and selected graphs which define and depict the measure impacts and outline the market segment data assumptions utilized for each case in the DBEDT DSM Forecasting models. The variables and figures included in the summary report sheet are described. Numerous tables and figures are included.

  18. Storage-centric Sensor Networks for Smart Buildings Baobing Wang

    E-Print Network [OSTI]

    Baras, John S.

    Storage-centric Sensor Networks for Smart Buildings Baobing Wang Department of Electrical of Smart Buildings, and introduces a system de- sign flow to compose both continuous-time and event role in future Smart Buildings. It is possible to retrofit old buildings to enable sensing

  19. A Study on Design Parameters of Stirling Engines for Buildings

    E-Print Network [OSTI]

    Ding, G.; Huang, S.; Zhang, C.; Hu, X.; Zhang, X.

    2006-01-01

    One of the most promising projects in the application of combined heat and power(CHP) lies in energy production for buildings. Stirling engines are very applicable to residential buildings, especially because of the higher electricity...

  20. Making America's Buildings Better (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-03-01

    This fact sheet is an overview of the U.S. Department of Energy's Building Technologies program. Buildings use more energy than any other sector of the U.S. economy? In fact, buildings consume more than 70% of the electricity and more than 50% of the natural gas Americans use. That's why the U.S. Department of Energy's (DOE's) Building Technologies Program (BTP) is working to improve building energy performance through high-impact research, out-reach, and regulatory efforts. These efforts will result in affordable, high-performance homes and commercial buildings. These grid-connected buildings will be more energy efficient than today's typical buildings, with renewable energy providing a portion of the power needs. They will combine energy-smart 'whole building' design and construction, appliances and equipment that minimize plug loads, and cost-effective photovoltaics or other on-site energy systems.

  1. Major Fuels","Site Electricity","Natural Gas","Fuel Oil","District...

    U.S. Energy Information Administration (EIA) Indexed Site

    C1. Total Energy Consumption by Major Fuel, 1999" ,"All Buildings",,"Total Energy Consumption (trillion Btu)",,,,,"Primary Electricity (trillion Btu)" ,"Number of Buildings...

  2. Major Fuels","Electricity",,"Natural Gas","Fuel Oil","District

    U.S. Energy Information Administration (EIA) Indexed Site

    of Buildings (thousand)","Floorspace (million square feet)","Sum of Major Fuels","Electricity",,"Natural Gas","Fuel Oil","District Heat" ,,,,"Primary","Site" "All Buildings...

  3. Effects of resource acquisitions on electric-utility shareholders

    SciTech Connect (OSTI)

    Hirst, E.; Hadley, S.

    1994-05-01

    The purpose of this study is to see how shareholders fare when the utility acquires different kinds of resources. The resources considered are utility-built, -operated, and -owned power plants with different combinations of construction and operation costs; purchases of power; and DSM programs. We calculated the net present value of realized (cash) return on equity as the primary factor used to represent shareholder interests. We examined shareholder returns for these resources as functions of public utility commission regulation, taxes, and the utility`s operating environment. Our treatment of regulation considers the frequency and type (future vs historic test year) of rate cases, inclusion of construction work in progress in ratebase vs allowance for funds used during construction, ratebase vs expensing of DSM programs, book and tax depreciation schedules, possible disallowances of ``excess`` power-plant or DSM capital costs, and possible lack of adjustment for ``excess`` fuel or purchased power costs. The tax policies we studied include the existence and rates for property, sales, and income taxes and the existence and regulatory treatment of deferred taxes. The utility`s operating environment includes the overall inflation rate, load-growth rate, escalation in nonproduction expenses, and nongeneration construction (capital) requirements. Finally, given the increasingly competitive nature of electricity markets, we briefly considered alternatives to traditional cost-of-service regulation. We examined shareholder returns for the resources described above in an environment where the utility competes with other suppliers solely on the basis of electricity price.

  4. Thermal Energy Storage for Cooling of Commercial Buildings

    E-Print Network [OSTI]

    Akbari, H.

    2010-01-01

    of Commercial Building Thermal Energy _Storage in ASEANGas Electric Company, "Thermal Energy Storage for Cooling,"LBL--25393 DE91 ,THERMAL ENERGY STORAGE FOR COOLING OF

  5. Database Aids Building Owners and Operators in Energy-Efficiency...

    Energy Savers [EERE]

    (BPD). Currently, residential and commercial buildings account for approximately 70% of electricity consumption in the United States. One of the primary challenges to expanding...

  6. Building Energy Management Open-Source Software Development ...

    Energy Savers [EERE]

    in small- and medium-sized commercial buildings. BEMOSS will be able to optimize electricity usage to reduce energy consumption and help implement demand response (DR)....

  7. Trends in Commercial Buildings--Trends in Energy Consumption...

    U.S. Energy Information Administration (EIA) Indexed Site

    the energy consumed (elsewhere) to generate and transmit the electricity supplied to the building (see Site and Primary Energy for additional information). The primary consumption...

  8. DOE Announces Webinars on Buildings of the Future, Overcoming...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cleansing Data for Benchmarking, and More DOE Announces Webinars on Next Generation Electric Machines, Zero Energy Buildings, and More DOE Announces Webinars on Deployment of...

  9. Virulence Factor Genes Detected in the Complete Genome Sequence of Corynebacterium uterequi DSM 45634, Isolated from the Uterus of a Maiden Mare

    E-Print Network [OSTI]

    Kriete, Martin

    The complete genome sequence of the type strain Corynebacterium uterequi DSM 45634 from an equine urogenital tract specimen comprises 2,419,437 bp and 2,163 protein-coding genes. Candidate virulence factors are homologs ...

  10. Complete Genome Sequence of the Type Strain Corynebacterium Epidermidicanis DSM 45586, Isolated from the Skin of a Dog Suffering from Pruritus

    E-Print Network [OSTI]

    Eimer, Janine

    The complete genome sequence of Corynebacterium epidermidicanis DSM 45586 comprises 2,692,072 bp with 58.06% G+C content. The annotation revealed 2,466 protein-coding regions, including genes for surface-anchored proteins ...

  11. Instrumenting Buildings to Determine Retrofit Savings: Murphy's Law Strikes Again

    E-Print Network [OSTI]

    O'Neal, D. L.; Bryant, J.; Carlson, K.

    1998-01-01

    &M University. Metering typically includes monitoring for the whole-building electric load, chilled and hot water thermal loads and selected submetered electrical loads. The emphasis of the lessons learned was on the instrumentation used and installation...

  12. Statistical recoupling: A new way to break the link between electric-utility sales and revenues

    SciTech Connect (OSTI)

    Hirst, E.

    1993-09-01

    In 1991, US electric utilities spent almost $1.8 billion on demand-side management (DSM) programs. These programs cut peak demands 5% and reduced electricity sales 1% that year. Utility projections suggest that these reductions will increase to 9% and 3%, respectively, by the year 2001. However, utility DSM efforts vary enormously across the country, concentrated in a few states along the east and west coasts and the upper midwest. To some extent, this concentration is a function of regulatory reforms that remove disincentives to utility shareholders for investments in DSM programs. A key component of these reforms is recovery of the net lost revenues caused by utility DSM programs. These lost revenues occur between rate cases when a utility encourages its customers to improve energy efficiency and cut demand. The reduction in sales means that the utility has less revenue to cover its fixed costs. This report describes a new method, statistical recoupling (SR), that addresses this net-lost-revenue problem. Like other decoupling approaches, SR breaks the link between electric-utility revenues and sales. Unlike other approaches, SR minimizes changes from traditional regulation. In particular, the risks of revenue swings associated with year-to-year changes in weather and the economy remain with the utility under SR. Statistical recoupling uses statistical models, based on historical data, that explain retail electricity sales as functions of the number of utility customers, winter and summer weather, the condition of the local economy, electricity price, and perhaps a few other key variables. These models, along with the actual values of the explanatory variables, are then used to estimate ``allowed`` electricity sales and revenues in future years.

  13. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roland Risser Director, Building Technologies Office Building Technologies Office Energy Efficiency Starts Here. 2 Building Technologies Office Integrated Approach: Improving...

  14. Hawaii demand-side management resource assessment. Final report, Reference Volume 1: Building prototype analysis

    SciTech Connect (OSTI)

    1995-04-01

    This report provides a detailed description of, and the baseline assumptions and simulation results for, the building prototype simulations conducted for the building types designated in the Work Plan for Demand-side Management Assessment of Hawaii`s Demand-Side Resources (HES-4, Phase 2). This report represents the second revision to the initial building prototype description report provided to DBEDT early in the project. Modifications and revisions to the prototypes, based on further calibration efforts and on comments received from DBEDT Staff have been incorporated into this final version. These baseline prototypes form the basis upon which the DSM measure impact estimates and the DSM measure data base were developed for this project. This report presents detailed information for each of the 17 different building prototypes developed for use with the DOE-21E program (23 buildings in total, including resorts and hotels defined separately for each island) to estimate the impact of the building technologies and measures included in this project. The remainder of this section presents some nomenclature and terminology utilized in the reports, tables, and data bases developed from this project to denote building type and vintage. Section 2 contains a more detailed discussion of the data sources, the definition of the residential sector building prototypes, and results of the DOE-2 analysis. Section 3 provides a similar discussion for the commercial sector. The prototype and baseline simulation results are presented in a separate section for each building type. Where possible, comparison of the baseline simulation results with benchmark data from the ENERGY 2020 model or other demand forecasting models specific to Hawaii is included for each building. Appendix A contains a detailed listing of the commercial sector baseline indoor lighting technologies included in the existing and new prototypes by building type.

  15. Electrical Engineering & Computer Science

    E-Print Network [OSTI]

    Bustamante, Fabin E.

    competing robots, building and racing NU's solar car, creating games and numerous other exciting projectsElectrical Engineering & Computer Science Department Undergraduate Study Manual 2014-2015 McCormick Northwestern Engineering #12;TABLE OF CONTENTS 1. Welcome from the Chair 3 1.1 Message from the Associate Chair

  16. Building America Expert Meeting: Transforming Existing Buildings...

    Energy Savers [EERE]

    Transforming Existing Buildings through New Media--An Idea Exchange Building America Expert Meeting: Transforming Existing Buildings through New Media--An Idea Exchange This report...

  17. Building America Residential Buildings Energy Efficiency Meeting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Energy Efficiency Meeting: July 2010 Building America Residential Buildings Energy Efficiency Meeting: July 2010 On this page, you may link to the summary report and...

  18. Hysteresis effects in hybrid building ventilation

    E-Print Network [OSTI]

    Flynn, Morris R.

    . Caulfield DAMTP & BP Institute for Multiphase Flow Univ. of Cambridge, UK Univ. of New Hampshire, Dept radiation, external wind forcing and internal heat gains e.g. due to electrical equipment or building

  19. According to the Canadian Electricity Association's (CEA) 2004 Canadian Electricity Human Resource Study (HR Study)

    E-Print Network [OSTI]

    According to the Canadian Electricity Association's (CEA) 2004 Canadian Electricity Human Resource and grow the electricity supply. Other industry realities such as the need to build and replace and increase within the electricity sector. The ability of educational and training institutions to adequately

  20. The Fifth Northwest Electric Power

    E-Print Network [OSTI]

    on an effort to build major new generating resources, including several nuclear power plants. Many- generating resources would soon be unable to keep up with the demand for electricity. In the 1970s of under-investment in generation and conservation; a deeply flawed electricity market design in Califor

  1. Building debris

    E-Print Network [OSTI]

    Dahmen, Joseph (Joseph F. D.)

    2006-01-01

    This thesis relates architectural practices to intelligent use of resources and the reuse of derelict spaces. The initial investigation of rammed earth as a building material is followed by site-specific operations at the ...

  2. A scoping study on energy-efficiency market transformation by California Utility DSM Programs

    SciTech Connect (OSTI)

    Eto, J.; Prahl, R.; Schlegel, J.

    1996-07-01

    Market transformation has emerged as a central policy objective for future publicly-funded energy-efficiency programs in California. California Public Utilities Commission (CPUC) Decision 95-12-063 calls for public funding to shift to activities designed to transform the energy-efficiency market. The CPUC envisions that funding {open_quotes}would only be needed for specific and limited periods of time to cause the market to be transformed{close_quotes}. At the same time, the CPUC also acknowledges that {open_quotes}there are many definitions of market transformation{close_quotes} ... and does {open_quotes}not attempt to refine those definitions today{close_quotes}. We argue that a definition of market transformation is essential. The literature is now replete with definitions, and an operational definition is needed for the CPUC to decide on which programs should be supported with public funds. The CPUC decision initially indicated a preference for programs that do not provide financial assistance 4-efficiency programs that rely on financial assistance to customers. However, energy customers have traditionally accounted for a substantial portion of California utility`s DSM programs, so the CPUC`s direction to use ratepayer funds to support programs that will transform the market raises critical questions about how to analyze what has happened in order to plan effectively for the future: Which utility energy-efficiency programs, including those that provide financial assistance to customers, have had market transforming effects? To what extent do current regulatory rules and practices encourage or discourage utilities from running programs that are designed to transform the market? Should the rules and programs be modified, and, if so, how, to promote market transformation?

  3. Archive Reference Buildings by Building Type: Warehouse

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  4. Archive Reference Buildings by Building Type: Supermarket

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  5. Technologies for Energy Efficient Buildings

    E-Print Network [OSTI]

    Resource Technologies for Energy Security Subtask 8.4 Deliverable By GE Global Research Niskayuna, New York.4.2.3 Total electrical energy consumption 33 3.4.2.4 Consumer alert messages 33 3.5 Laboratory TestingTechnologies for Energy Efficient Buildings Prepared for the U.S. Department of Energy Office

  6. Influence of Air Conditioner Operation on Electricity Use and Peak Demand

    E-Print Network [OSTI]

    McGarity, A. E.; Feuermann, D.; Kempton, W.; Norford, L. K.

    1987-01-01

    Electricity demand due to occupant controlled room air conditioners in a large mater-metered apartment building is analyzed. Hourly data on the electric demand of the building and of individual air conditioners are used in analyses of annual...

  7. GENERAL SERVICES ADMINISTRATION PUBLIC BUILDINGS SERVICE

    E-Print Network [OSTI]

    (Wax, cleansers, cloths, etc.) 7. CONTRACT SERVICES (Window washing, waste and snow removal) B. HEATING a share of building support/common areas such as elevator lobbies, building corridors, and floor service areas. Floor service areas typically include restrooms, janitor rooms, telephone closets, electrical

  8. Building Technologies Office Overview

    SciTech Connect (OSTI)

    2013-04-01

    Building Technologies Office Overview Presentation for the 2013 Building Technologies Office's Program Peer Review

  9. Building America System Research

    SciTech Connect (OSTI)

    2013-04-01

    Residential Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review

  10. Energy Efficient Buildings Hub

    SciTech Connect (OSTI)

    2013-04-01

    Energy Efficient Buildings HUB Lunch Presentation for the 2013 Building Technologies Office's Program Peer Review

  11. Electric Storage in California's Commercial Buildings

    E-Print Network [OSTI]

    Stadler, Michael

    2014-01-01

    microgrid can be fuel cells, PV, solar thermal, stationary storage, absorption cooling, combined heat and power,

  12. Electric Storage in California's Commercial Buildings

    E-Print Network [OSTI]

    Stadler, Michael

    2014-01-01

    be used to offset EV charging at home at the residentialthe different EV and home charging constraints. Decisiondimensionless EV battery charging efficiency, dimensionless

  13. Electric Storage in California's Commercial Buildings

    E-Print Network [OSTI]

    Stadler, Michael

    2014-01-01

    system (EMS) to enable demand response or any other buildingfor tariff-driven demand response. By using EVs connected tobased technologies, $ demand response costs for other non-

  14. Office Buildings - Full Report

    Gasoline and Diesel Fuel Update (EIA)

    PDF Office Buildings Although no one building type dominates the commercial buildings sector, office buildings are the most common and account for more than 800,000 buildings or 17...

  15. Optimal Planning and Operation of Smart Grids with Electric Vehicle Interconnection

    E-Print Network [OSTI]

    Stadler, Michael

    2012-01-01

    buildings [GW] stationary storage [GWh] combined heat and power (CHP) andenergy source or CHP system at the building could be used toon CHP, they feed electricity back to the building.

  16. VT Electric Services VTES 601 Energy Dr.

    E-Print Network [OSTI]

    VT Electric Services Location VTES 601 Energy Dr. Blacskburg, VA 24061 (540) 231-6437 Office Hours Electric Services is to provide adequate, reliable and economical electric service to the buildings and sidewalk lighting. Functional Areas Customer Support; Powerline Repair & Maintenance; Power Transmission

  17. Saving Energy in Industrial Compressed Air Systems: Issues and Obstacles in DSM Program Design

    E-Print Network [OSTI]

    Trojanowski, D.; Parfomak, P.

    1993-01-01

    Compressed air systems are among the most common and least efficient electrical end uses in industrial plants. Over 50% of plants use compressed air systems. According to various estimates, between 20% and 35% of the energy used in these systems...

  18. Variability in Automated Responses of Commercial Buildings and Industrial

    E-Print Network [OSTI]

    LBNL-5129E Variability in Automated Responses of Commercial Buildings and Industrial Facilities;Variability in Automated Responses of Commercial Buildings and Industrial Facilities to Dynamic Electricity consumption of commercial buildings and industrial facilities (C&I facilities) during Demand Response (DR

  19. Solar Applications to Multiple County Buildings Feasibility Study

    Broader source: Energy.gov [DOE]

    This study was requested by Salt Lake County in an effort to obtain a cursory overview of solar electric and solar thermal application possibilities on the rooftops of existing county buildings. The subject buildings represent various County Divisions: Aging Services, Community Services, County Health, County Library, Parks & Recreation, Public Works, County Sheriff and Youth Services. There are fifty two buildings included in the study.

  20. Buildings & Connective

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Signage Program Complete New Signage, Wayfinding, Campus Identity Program 2 4 4 0 2 2 0 4 2 4 2 5 16 47 Sciences Greenway Interim Landscape New Green Pathway Connecting Parking, Building Entrances Courtyard 2 2 0 0 4 2 0 0 4 2 2 0 16 34 Ashland/Taylor Lot G/K Interim Green Gate Provide New Green

  1. Better Buildings

    E-Print Network [OSTI]

    Neukomm, M.

    2012-01-01

    replicable programs/solutions. Emphasis on home energy improvement Federal Performance-based Contracting Challenge ?Leverage ARRA ?Overcome Barriers ?Drive Action/Change ?Grow Partnerships Better Buildings promotes energy efficiency as top... Senior Executive --Announce innovations/market solutions Take Action -Showcase project within 9 months -Organization wide plan, schedule and milestones within 9 months Report Results -Share information and implementation models -Share...

  2. Buildings*","Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: AlternativeMonthly","10/2015"Monthly","10/2015" ,"Release7 Relative Standard ErrorsYear Jan Feb MarA6. BuildingB7. Building6.

  3. Buildings*","Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: AlternativeMonthly","10/2015"Monthly","10/2015" ,"Release7 Relative Standard ErrorsYear Jan Feb MarA6. BuildingB7. Building6.8.

  4. Electricity Reliability

    E-Print Network [OSTI]

    Post, Wilfred M.

    Electricity Delivery and Energy Reliability High Temperature Superconductivity (HTS) Visualization in the future because they have virtually no resistance to electric current, offering the possibility of new electric power equipment with more energy efficiency and higher capacity than today's systems

  5. Solar Electric Grid Integration - Advanced Concepts (SEGIS-AC...

    Broader source: Energy.gov (indexed) [DOE]

    Solar Electric Grid Integration - Advanced Concepts (SEGIS-AC) program, DOE is funding solar projects that are targeting ways to develop power electronics and build smarter, more...

  6. Energy Department and Edison Electric Institute Sign Agreement...

    Broader source: Energy.gov (indexed) [DOE]

    between the Department and EEI, strengthening collaborative action to accelerate plug-in electric vehicle (PEV) and charging infrastructure deployment. Building on the President's...

  7. As Electric Vehicles Take Charge, Costs Power Down | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department, General Motors has been able to develop the capacity to build electric and hybrid motors internally. That capacity has made cars like the upcoming Chevy Spark EV...

  8. Vectren Energy Delivery of Indiana (Electric)- Commercial New Construction Rebates

    Broader source: Energy.gov [DOE]

    Vectren Energy Delivery offers commercial customers in Indiana electric rebates for the installation of certain types of equipment in newly constructed buildings through its Energy Design Assist...

  9. The Swiss Competence Center for Energy Research Heat and Electricity...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on buildings and processes by exploring advanced adiabatic compressed air storage (AA-CAES), pumped heat electric storage (PHES) and high-temperature process heat. iii) Hydrogen...

  10. Cumberland Valley Electric Cooperative- Energy Efficiency and Renewable Energy Program

    Broader source: Energy.gov [DOE]

    Cumberland Valley Electric offers a number of programs to promote energy conservation. This program offers rebates for air source heat pumps, building insulation (including windows and doors), and...

  11. DRAFT FOR REVIEW AND DISCUSSION* Building Greener Buildings with No Increase in Budget

    E-Print Network [OSTI]

    Rose, Michael R.

    to hydronic baseboard heating. Using ground-source heat pumps could be even more efficient. Since the use heat loads demand massive quantities of industrial and potable hot water. For example, vivariums have to all types of academic buildings. Electric Heating in a "Green" Building? UC Irvine's combined heat

  12. Btu)","per Building

    U.S. Energy Information Administration (EIA) Indexed Site

    ,"Number of Buildings (thousand)","Floorspace (million square feet)","Floorspace per Building (thousand square feet)","Total (trillion Btu)","per Building (million Btu)","per...

  13. Building Performance Simulation

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    Y (2008). DeSTAn integrated building simulation toolkit,Part ? : Fundamentals. Building Simulation, 1: 95 ? 110.Y (2008). DeSTAn integrated building simulation toolkit,

  14. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Rhode Island Building Code Standards Committee adopts, promulgates and administers the state building code. Compliance is determined through the building permit and inspection process by local...

  15. Accessible buildings Moderately accessible buildings*

    E-Print Network [OSTI]

    Lee, Dongwon

    Campus neighborhood map Moderately accessible paths** Accessible building entrance via parking lot to the University Park campus. This map, provided by UAC, is designed to assist persons with disabilities in finding accessibility. Your observations and suggestions regarding architectural For more information on UAC, you can

  16. 1999 Commercial Building Characteristics--Building Activity Comparison

    U.S. Energy Information Administration (EIA) Indexed Site

    Building Activity Comparison Percentage of Floorspace and Buildings by Principal Building Activity, 1999 Percentage of Floorspace and Buildings by Principal Building Activity,...

  17. ARE BUILDING CODES EFFECTIVE AT SAVING ENERGY? EVIDENCE FROM RESIDENTIAL BILLING DATA IN FLORIDA

    E-Print Network [OSTI]

    Kotchen, Matthew J.

    ARE BUILDING CODES EFFECTIVE AT SAVING ENERGY? EVIDENCE FROM RESIDENTIAL BILLING DATA IN FLORIDA code applied to buildings using residential billing data on electricity and natural gas, combined in the built environment, as buildings account for roughly 72% of electricity con- sumption, 39% of all energy

  18. Utilizing Renewable Energy Resources by Adopting DSM Techniques and Storage Facilities

    E-Print Network [OSTI]

    Wong, Vincent

    -time pricing (RTP) combined with IBR to reflect the fluctuation of the wholesale electricity prices, Vancouver, Canada University of California, Riverside, CA, USA E-mail: {psamadi, vincentw, rschober to operate an ECS device in a residential unit that is equipped with a behind-the-meter renewable generator

  19. Richmond Electric Vehicle Initiative Electric Vehicle Readiness...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Richmond Electric Vehicle Initiative Electric Vehicle Readiness Plan Richmond Electric Vehicle Initiative Electric Vehicle Readiness Plan The REVi plan addresses the electric...

  20. Buildings Interoperability Planning: Connected Buildings Interoperabil...

    Broader source: Energy.gov (indexed) [DOE]

    Vision Context Steve Widergren PNNL 11 March 2015 Topics Purpose of meeting Buildings automation in the transformative time of connectivity Interoperability - a connected buildings...

  1. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01

    Rental Sample Control Buildings PSM Controls Rated BuildingsSample Control Buildings PSM Controls Appendix Table A2 (Sample Control Buildings PSM Controls Rated Buildings Sales

  2. Electrical + Engineering

    E-Print Network [OSTI]

    Cafarella, Michael J.

    Electrical + Computer Engineering Electrical + Computer Engineering 2013 PROFILE PEOPLE Faculty Students Electrical Engineering - 330 Computer Engineering - 224 Graduate Students EE and EE:Systems MSE - 301 EE and EE:Systems PhD - 296 Degrees Awarded Electrical Engineering BSE - 123 Computer Engineering

  3. Building Envelope Stakeholder Workshop

    Broader source: Energy.gov [DOE]

    Oak Ridge National Laboratory is hosting a building envelope stakeholder workshop on behalf of the DOE Building Technologies Office.

  4. Daylighting, dimming, and the electricity crisis in California

    SciTech Connect (OSTI)

    Rubinstein, Francis; Neils, Danielle; Colak, Nesrin

    2001-09-17

    Dimming controls for electric lighting have been one of the mainstays of the effort to use daylighting to reduce annual lighting energy consumption. The coincidence of daylighting with electric utility peak demand makes daylighting controls an effective strategy for reducing commercial building peak electric loads. During times of energy shortage, there is a greatly increased need to reduce electricity use during peak periods, both to ease the burden on electricity providers and to control the operating costs of buildings. The paper presents a typical commercial building electric demand profile during summer, and shows how daylighting-linked lighting controls and load shedding techniques can reduce lighting at precisely those times when electricity is most expensive. We look at the importance of dimming for increasing the reliability of the electricity grid in California and other states, as well as examine the potential cost-effectiveness of widespread use of daylighting to save energy and reduce monthly electricity bills.

  5. Electric Car Competition | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electric Car Competition March 19, 2016 8:00AM to 12:30PM Location Building Offsite Type Meeting Series Educational Outreach Program Event Argonne will host the 2016 Regional...

  6. 1 Zoology Building 2 Cruickshank Building

    E-Print Network [OSTI]

    Neri, Peter

    1 Zoology Building 2 Cruickshank Building 3 23 St Machar Drive 4 King's Museum (Old Town House) 5 The Hub 6 St Mary's 7 Fraser Noble Building 8 Elphinstone Road Halls 9 The Sir Duncan Rice Library 10 Meston Building 11 Chaplaincy Centre 12 Confucius Institute 13 Security Office/Mailroom 14 Counselling

  7. Complete Genome Sequence of the Type Strain Corynebacterium Mustelae DSM 45274, Isolated from Various Tissues of a Male Ferret with Lethal Sepsis

    E-Print Network [OSTI]

    Eimer, Janine

    The complete genome of Corynebacterium mustelae DSM 45274 comprises 3,474,226 bp and 3,188 genes. Prominent niche and virulence factors are SpaBCA- and SpaDEF-type pili with similarity to pilus proteins of Corynebacterium ...

  8. 1 | Building America eere.energy.gov Evaluation of Ducted GE

    E-Print Network [OSTI]

    1 | Building America eere.energy.gov Evaluation of Ducted GE Hybrid Heat Pump Water Heater in PNNL Lab Homes Sarah Widder Building America Program Review April 24-25, 2013 #12;2 | Building America eere Technologies Program DOE, Office of Electricity Project Partners #12;3 | Building America eere

  9. Building-Grid Integration Research and Development Innovators Program (BIRD IP)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Building Technologies Office (BTO) within the Department of Energy (DOE) is seeking graduate students interested in exploring building-grid integration and development (R&D) technology concepts that can improve the operating efficiency of buildings and increase penetration of distributed renewable energy generation, leading to more efficient buildings and cleaner generation of electricity.

  10. Better Buildings Webinar: Making Utility Energy Efficiency Funds Work for You

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Better Buildings will host a webinar on innovative collaborations with utilities to bring big energy savings to their building portfolios and help reduce utility peak electricity demand.

  11. Cooperative Demand Response Using RepeatedGame for Price-Anticipating Buildings in Smart Grid

    E-Print Network [OSTI]

    Ma, Kai; Hu, Guoqiang; Spanos, Costas J

    2014-01-01

    Price-Anticipating Buildings in Smart Grid Kai Ma Guoqiangprice-anticipating buildings in smart grid. The cooperativebuilding electricity use, with application to demand response, IEEE Transactions on Smart

  12. ENGNEERING ITENABLED ELECTRICITY SERVICES Marija Ilic

    E-Print Network [OSTI]

    (implications on candidate architectures) The man-made electric power network, its governance system Today's Transmission Grid Tomorrow's Transmission Grid Deliver supply to meet given demand Deliver power connected to a stable grid Build new transmission lines for forecast demand Build new transmission lines

  13. Retail Buildings: Assessing and Reducing Plug and Process Loads in Retail Buildings (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01

    Plug and process loads (PPLs) in commercial buildings account for almost 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. PPLs are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the occupants. They use an increasingly large fraction of the building energy use pie because the number and variety of electrical devices have increased along with building system efficiency. Reducing PPLs is difficult because energy efficiency opportunities and the equipment needed to address PPL energy use in retail spaces are poorly understood.

  14. Office Buildings: Assessing and Reducing Plug and Process Loads in Office Buildings (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01

    Plug and process loads (PPLs) in commercial buildings account for almost 5% of U.S. primary energy consumption. Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. PPLs are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the occupants. They use an increasingly large fraction of the building energy use pie because the number and variety of electrical devices have increased along with building system efficiency. Reducing PPLs is difficult because energy efficiency opportunities and the equipment needed to address PPL energy use in office spaces are poorly understood.

  15. Buildings*","Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: AlternativeMonthly","10/2015"Monthly","10/2015" ,"Release7 Relative Standard ErrorsYear Jan Feb MarA6. BuildingB7.

  16. Building America Building Science Translator

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De pEnergy IndustrialofofBuilding Science Translator February

  17. Carnegie Mellon Electricity Industry Center

    E-Print Network [OSTI]

    McGaughey, Alan

    , Bonneville Power Administration G. Edison Holland, Executive VP & General Counsel, Southern Company James that supply the equipment, all the organizations that build and operate the nation's electric power system, agencies that shape and regulate the system as well as customers who use the power. Support Initial

  18. Building America Whole-House Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Existing Homes: Evaluating Energy Savings in All-Electric Public Housing in the Pacific Northwest (Fact sheet) Building America Whole-House Solutions for New and Existing...

  19. DOE/EIA-0318/1 Nonresidential Buildings Energy Consumption Survey...

    U.S. Energy Information Administration (EIA) Indexed Site

    1 Nonresidential Buildings Energy Consumption Survey: 1979 Consumption and Expenditures D Part I: Natural Gas and Electricity March 1983 Energy Information Administration...

  20. Building America Case Study: High Performance Ducts in Hot-Dry...

    Office of Scientific and Technical Information (OSTI)

    the conditioned thermal envelope. To support this activity, in 2013 the Pacific Gas & Electric Company initiated a project with Davis Energy Group (lead for the Building...

  1. Bringing simulation to implementation: Presentation of a global approach in the design of passive solar buildings under humid tropical climates

    E-Print Network [OSTI]

    Garde, Franois; Celaire, Robert

    2012-01-01

    In early 1995, a DSM pilot initiative has been launched in the French islands of Guadeloupe and Reunion through a partnership between several public and private partners (the French Public Utility EDF, the University of Reunion Island, low cost housing companies, architects, energy consultants, etc...) to set up standards to improve thermal design of new residential buildings in tropical climates. This partnership led to defining optimized bio-climatic urban planning and architectural designs featuring the use of passive cooling architectural principles (solar shading, natural ventilation) and components, as well as energy efficient systems and technologies. The design and sizing of each architectural component on internal thermal comfort in building has been assessed with a validated thermal and airflow building simulation software (CODYRUN). These technical specifications have been edited in a reference document which has been used to build over 300 new pilot dwellings through the years 1996-1998 in Reunion...

  2. LABORATORY IV: ELECTRIC FIELD AND POTENTIAL

    E-Print Network [OSTI]

    Minnesota, University of

    LABORATORY IV: ELECTRIC FIELD AND POTENTIAL Lab IV - 1 Many forces in nature cannot be modeled of new devices. The problems in this laboratory are primarily designed to give you practice visualizing. In this laboratory, you will first explore electric fields by building different configurations of charged objects

  3. Energy Efficiency in Buildings- the Utilities View

    E-Print Network [OSTI]

    Konig, U.

    2008-01-01

    Efficiency in Buildings - the Utilities View U. K?nig RWE Energy AG The energy to lead ESL-IC-08-10-27 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 RWE Energy... for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 RWE Energy / Energieeffizienz bei Immobilien / U. K?nig / ICEBO '08 SEITE 3 RWE ? One of the five leading Energy Companies in Europe > Nr 1 producer of electricity in Germany, Nr 3 in UK...

  4. Bonneville Power Ampere Annex Z-995 Building

    High Performance Buildings Database

    Vancouver, WA The Bonneville Power Administration (BPA), a federal agency headquartered in Portland, Oregon, provides about half of the electricity used in the Pacific Northwest and operates more than three-fourths of the region's high-voltage transmission. Because BPA markets power at cost from 31 federal dams, its rates are among the least expensive electricity in the country. The Ampere Annex project is a renovation of an exisiting 60-year-old standard warehouse building located within the Ross Complex.

  5. Building America Top Innovations Hall of Fame Profile - Building...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top...

  6. Building Science-Based Climate Maps - Building America Top Innovation...

    Energy Savers [EERE]

    Building Science-Based Climate Maps - Building America Top Innovation Building Science-Based Climate Maps - Building America Top Innovation Photo showing climate zone maps based on...

  7. Better Buildings Neighborhood Initiative Upgrades 100,000 Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Neighborhood Initiative Upgrades 100,000 Buildings, Saves 730 Million on Energy Bills Better Buildings Neighborhood Initiative Upgrades 100,000 Buildings, Saves...

  8. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01

    indoor air quality, buildings energy performance, computervoluntary building-energy-performance guidelines. Recentlyrelated to building-energy-performance standards, guidelines

  9. Building America

    SciTech Connect (OSTI)

    Brad Oberg

    2010-12-31

    Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performance homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.

  10. Office Buildings: Consumption Tables

    U.S. Energy Information Administration (EIA) Indexed Site

    and Type of Office Building Total (trillion Btu) per Building (million Btu) per Square Foot (thousand Btu) Dollars per Million Btu All Office Buildings 1,089 1,475 90.5 16.32...

  11. Building Energy Code

    Broader source: Energy.gov [DOE]

    In 2006 Iowa enactedH.F. 2361,requiring the State Building Commissioner to adopt energy conservation requirements based on a nationally recognized building energy code. The State Building Code...

  12. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    platformsand buildingautomationsystems(BAS),aincluding basic building automation control, faultSmart building power management automation. Building

  13. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    United States and China, Energy and Buildings, 2013. Underin Singapore. Energy and Buildings, 37, 167-174. Eom, J. ,building operations. Energy and Buildings, 33, 783791.

  14. Health Care Buildings: Equipment Table

    U.S. Energy Information Administration (EIA) Indexed Site

    Equipment Table Buildings, Size and Age Data by Equipment Types for Health Care Buildings Number of Buildings (thousand) Percent of Buildings Floorspace (million square feet)...

  15. Assessment of Energy Impact of Window Technologies for Commercial Buildings

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    R_Clear EC_Window EC_HR_Window Energy Savings per ft ofWindow Area Whole Building Energy Use Site SourceSite Source Gas Energy % Site Energy % Source Electricity

  16. An Overview of the Building Energy Retrofit Research Program

    E-Print Network [OSTI]

    Mixon, W. R.

    1987-01-01

    selected most often. Participants in the project included DOE, OWL, ASE, the State of Wisconsin. Wisconsin Power and Light, Wisconsin Gas, and Madison Gas and Electric. SHORT TERU BUILDING ENERGY MONITORING Monitoring techniques have been developed...

  17. Building Performance Services: Guidelines and Program Test Progress Report

    E-Print Network [OSTI]

    Anderson, K. J.; Tuffo, M.; Schick, S.

    2003-01-01

    This paper presents the progress of the Building Performance Services (BPS) program begun in July 2002 as a partnership between the Northwest Energy Efficiency Alliance (Alliance) and northwest regional electric utilities. This paper focuses...

  18. proactive energy management for next-generation building systems

    E-Print Network [OSTI]

    Victor M Zavala

    2010-03-03

    Mar 3, 2010 ... PROACTIVE ENERGY MANAGEMENT FOR NEXT-GENERATION BUILDING SYSTEMS ... and an accurate prediction of the daily electricity demand profile. ... of weather conditions, fuel prices, heat gains, and utility demands.

  19. Building a Greener, More Resilient Future in Washington State...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and solar onto the electric grid. The aim is to support greater deployment of these technologies and build a grid that is more efficient, flexible and resilient to the effects of...

  20. Building America Webinar: Ventilation in Multifamily Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    multifamily buildings, including how to successfully implement those strategies through smart design, specification, and construction techniques. webinarventilationmultifamily...

  1. Experimental and Simulation Study on the Performance of Daylighting in an Industrial Building and its Energy Saving Potential

    E-Print Network [OSTI]

    Chen, Qingyan "Yan"

    electricity consumption in Hong Kong [3]. For industrial buildings, the percentage varies widely depending-34% of the total building electricity consumption in Dongguan, China [4]. To reduce the energy consumption reduce building energy consumption effectively. Studies on this topic have been mostly conducted

  2. Building Energy Asset Score: Building Owners

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies opportunities for users to invest in energy efficiency upgrades. It is web-based and free to use.

  3. Lighting/HVAC interactions and their effects on annual and peak HVAC requirements in commercial buildings

    SciTech Connect (OSTI)

    Sezgen, A.O.; Huang, Y.J.

    1994-08-01

    Lighting measures is one effective strategy for reducing energy use in commercial buildings. Reductions in lighting energy have secondary effects on cooling/heating energy consumption and peak HVAC requirements; in general, they increase the heating and decrease cooling requirements of a building. Net change in a building`s annual and peak energy requirements, however, is difficult to quantify and depends on building characteristics, operating conditions, climate. This paper characterizes impacts of lighting/HVAC interactions on annual and peak heating/cooling requirements of prototypical US commercial buildings through computer simulations using DOE-2.1E building energy analysis program. Ten building types of two vintages and nine climates are chosen to represent the US commercial building stock. For each combination, a prototypical building is simulated with two lighting power densities, and resultant changes in heating and cooling loads are recorded. Simple concepts of Lighting Coincidence Factors are used to describe the observed interactions between lighting and HVAC requirements. (Coincidence Factor (CF) is ratio of changes in HVAC loads to those in lighting loads, where load is either annual or peak load). The paper presents tables of lighting CF for major building types and climates. These parameters can be used for regional or national cost/benefit analyses of lighting- related policies and utility DSM programs. Using Annual CFs and typical efficiencies for heating and cooling systems, net changes in space conditioning energy use from a lighting measure can be calculated. Similarly, Demand CFs can be used to estimate the changes in HVAC sizing, which can then be converted to changes in capital outlay using standard-design curves; or they can be used to estimate coincident peak reductions for the analysis of the utility`s avoided costs. Results from use of these tables are meaningful only when they involve a significantly large number of buildings.

  4. Public-policy responsibilities in a restructured electricity industry

    SciTech Connect (OSTI)

    Tonn, B.; Hirst, E.; Bauer, D.

    1995-06-01

    In this report, we identify and define the key public-policy values, objectives, and actions that the US electricity industry currently meets. We also discuss the opportunities for meeting these objectives in a restructured industry that relies primarily on market forces rather than on government mandates. And we discuss those functions that governments might undertake, presumably because they will not be fully met by a restructured industry on its own. These discussions are based on a variety of inputs. The most important inputs came from participants in an April 1995 workshop on Public-Policy Responsibilities and Electric Industry Restructuring: Shaping the Research Agenda. Other sources of information and insights include the reviews of a draft of this report by workshop participants and others and the rapidly growing literature on electric-industry restructuring and its implications. One of the major concerns about the future of the electricity industry is the fate of numerous social and environmental programs supported by today`s electric utilities. Many people worry that a market-driven industry may not meet the public-policy objectives that electric utilities have met in the past. Examples of potentially at-risk programs include demand-side management (DSM), renewable energy, low-income weatherization, and fuel diversity. Workshop participants represented electric utilities, public utility commissions (PUCs), state energy offices, public-interest groups, other energy providers, and the research community.

  5. Model Building Energy Code

    Broader source: Energy.gov [DOE]

    The Energy Efficiency Building Performance Standards (EEBPS) are statewide minimum requirements that all new construction and additions to existing buildings must satisfy. Exceptions include...

  6. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2014-01-01

    ABORATORY Building Scale DC Microgrids Chris Marnay, Stevenemployer. Building Scale DC Microgrids Chris Marnay, IEEEgenerally known as microgrids (or grids). The dominance of

  7. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Energy Conservation Construction Code of New York State (ECCCNYS) requires that all government, commercial and residential buildings, including renovations involving building system replaceme...

  8. Building Energy Codes Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program U.S. Department of Energy Building Technologies Office Jeremy Williams, Project Manager Building Technologies Peer Review April 2014 Presentation Overview: * Introduction *...

  9. Building Energy Modeling Library

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    303-567-8609 April 2, 2013 Photo by : Dennis Schroeder, NREL 23250 2 | Building Technologies Office eere.energy.gov Project Overview Building Energy Modeling (BEM)...

  10. A functional analysis of electrical load curve modelling for some households specific electricity end-uses

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    domestic end-uses, the development of plug-in hybrid and electric vehicles, the increase of heat pumps heating systems such as heat pumps in new building or which will replace old installed fossil fuels based influences: best building insulation which will reduce the energy needs for heating and cooling; new

  11. Electric Vehicles

    ScienceCinema (OSTI)

    Ozpineci, Burak

    2014-07-23

    Burak Ozpineci sees a future where electric vehicles charge while we drive them down the road, thanks in part to research under way at ORNL.

  12. Electric Vehicles

    SciTech Connect (OSTI)

    Ozpineci, Burak

    2014-05-02

    Burak Ozpineci sees a future where electric vehicles charge while we drive them down the road, thanks in part to research under way at ORNL.

  13. buildings in Continued on p. 5

    E-Print Network [OSTI]

    Pennycook, Steve

    systems; ground-source and distributed heat pumps; and building-inte- grated, solar, combined heat Research Centers Biofuel-electric hybrid engine (courtesy of the University of Michigan) #12;2 Science for the waste heat recovery system using exhaust from the light-duty diesel engine Exhaust from diesel vehicles

  14. Buildings That Think Green (LBNL Science at the Theater)

    ScienceCinema (OSTI)

    Majumdar, Arun

    2011-04-28

    Buildings are the SUVs of U.S. energy consumption, gobbling up 71 percent of the nation's electricity. In this Sept. 22, 2008 talk, Arun Majumdar, Director of Berkeley Lab's Environmental Energy Technologies Division, discusses how scientists are creating a new generation of net-zero energy, carbon-neutral buildings.

  15. Procedure for Measuring and Reporting Commercial Building Energy Performance

    SciTech Connect (OSTI)

    Barley, D.; Deru, M.; Pless, S.; Torcellini, P.

    2005-10-01

    This procedure is intended to provide a standard method for measuring and characterizing the energy performance of commercial buildings. The procedure determines the energy consumption, electrical energy demand, and on-site energy production in existing commercial buildings of all types. The performance metrics determined here may be compared against benchmarks to evaluate performance and verify that performance targets have been achieved.

  16. GreenCharge: Managing Renewable Energy in Smart Buildings

    E-Print Network [OSTI]

    Shenoy, Prashant

    1 GreenCharge: Managing Renewable Energy in Smart Buildings Aditya Mishra, David Irwin, Prashant that combines market-based electricity pricing models with on-site renewables and modest energy storage (in, called GreenCharge, to efficiently manage the renewable energy and storage to reduce a building

  17. High Performance Sustainable Buildings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Buildings Greening Transportation Green Purchasing & Green Technology Pollution Prevention Science Serving Sustainability ENVIRONMENTAL SUSTAINABILITY GOALS at...

  18. Better Buildings Neighborhood Program

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy Better Buildings Neighborhood Program: Business Models Guide, October 27, 2011.

  19. Electric machine

    DOE Patents [OSTI]

    El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  20. Trends in energy use in commercial buildings -- Sixteen years of EIA's commercial buildings energy consumption survey

    SciTech Connect (OSTI)

    Davis, J.; Swenson, A.

    1998-07-01

    The Commercial Buildings Energy Consumption Survey (CBECS) collects basic statistical information on energy consumption and energy-related characteristics of commercial buildings in the US. The first CBECS was conducted in 1979 and the most recent was completed in 1995. Over that period, the number of commercial bindings and total amount of floorspace increased, total consumption remained flat, and total energy intensity declined. By 1995, there were 4.6 million commercial buildings and 58.8 billion square feet of floorspace. The buildings consumed a total of 5.3 quadrillion Btu (site energy), with a total intensity of 90.5 thousand Btu per square foot per year. Electricity consumption exceeded natural gas consumption (2.6 quadrillion and 1.9 quadrillion Btu, respectively). In 1995, the two major users of energy were space heating (1.7 quadrillion Btu) and lighting (1.2 quadrillion Btu). Over the period 1979 to 1995, natural gas intensity declined from 71.4 thousand to 51.0 thousand Btu per square foot per year. Electricity intensity did not show a similar decline (44.2 thousand Btu per square foot in 1979 and 45.7 thousand Btu per square foot in 1995). Two types of commercial buildings, office buildings and mercantile and service buildings, were the largest consumers of energy in 1995 (2.0 quadrillion Btu, 38% of total consumption). Three building types, health care, food service, and food sales, had significantly higher energy intensities. Buildings constructed since 1970 accounted for half of total consumption and a majority (59%) of total electricity consumption.

  1. Sector-specific issues and reporting methodologies supporting the General Guidelines for the voluntary reporting of greenhouse gases under Section 1605(b) of the Energy Policy Act of 1992. Volume 1: Part 1, Electricity supply sector; Part 2, Residential and commercial buildings sector; Part 3, Industrial sector

    SciTech Connect (OSTI)

    Not Available

    1994-10-01

    DOE encourages you to report your achievements in reducing greenhouse gas emissions and sequestering carbon under this program. Global climate change is increasingly being recognized as a threat that individuals and organizations can take action against. If you are among those taking action, reporting your projects may lead to recognition for you, motivation for others, and synergistic learning for the global community. This report discusses the reporting process for the voluntary detailed guidance in the sectoral supporting documents for electricity supply, residential and commercial buildings, industry, transportation, forestry, and agriculture. You may have reportable projects in several sectors; you may report them separately or capture and report the total effects on an entity-wide report.

  2. Building Green in Greensburg: Business Incubator Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing SunChips Business Incubator building in Greensburg, Kansas.

  3. Building Green in Greensburg: City Hall Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing City Hall building in Greensburg, Kansas.

  4. Building America Webinar: Building America Research Tools

    Broader source: Energy.gov [DOE]

    This webinar was held on March 18, 2015, and reviewed Building America Research Tools, including Field Test Best Practices, BEopt, and National Residential Efficiency Measures Database.

  5. Vectren Energy Delivery of Indiana (Electric)- Commercial New Construction Rebates (Indiana)

    Broader source: Energy.gov [DOE]

    Vectren Energy Delivery offers commercial customers in Indiana electric rebates for the installation of certain types of equipment in newly constructed buildings. Prescriptive and performance based...

  6. Optimal investment and scheduling of distributed energy resources with uncertainty in electric vehicles driving schedules

    E-Print Network [OSTI]

    Cardoso, Goncalo

    2014-01-01

    to scheduling in microgrids, Energy, vol. 36, no. 7, pp.of Commercial-Building Microgrids, IEEE Transactions onfor LV unbalanced microgrids with plugged-in electric

  7. Major Fuels","Electricity","Natural Gas","Fuel Oil","District...

    U.S. Energy Information Administration (EIA) Indexed Site

    (million square feet)","Total of Major Fuels","Electricity","Natural Gas","Fuel Oil","District Heat" "All Buildings ...",4657,67338,81552,66424,10...

  8. Electrical connector

    DOE Patents [OSTI]

    Dilliner, Jennifer L.; Baker, Thomas M.; Akasam, Sivaprasad; Hoff, Brian D.

    2006-11-21

    An electrical connector includes a female component having one or more receptacles, a first test receptacle, and a second test receptacle. The electrical connector also includes a male component having one or more terminals configured to engage the one or more receptacles, a first test pin configured to engage the first test receptacle, and a second test pin configured to engage the second test receptacle. The first test receptacle is electrically connected to the second test receptacle, and at least one of the first test pin and the second test pin is shorter in length than the one or more terminals.

  9. 1 MJ electric gun facility at LLNL

    SciTech Connect (OSTI)

    Lee, R.S.; Osher, J.E.; Chau, H.H.; Pomykal, G.; Speer, R.D.

    1992-02-01

    Since the early 1970`s LLNL has used devices which we call electric guns to accelerate thin flyer plates to hypervelocities. These devices use a capacitor bank to electrically explode a thin metal foil. The explosion of the foil drives a thin plate, placed on top of the foil, to velocities up to 18 km/s. This paper describes the latest step in the evolution of these devices, a 1 MJ electric gun system. The primary motivation for building this electric gun system was to throw large-area, thin-plate impactors with area up to 930 cm{sup 2}.

  10. Model documentation: Electricity market module, electricity finance and pricing submodule

    SciTech Connect (OSTI)

    Not Available

    1994-04-07

    The purpose of this report is to define the objectives of the model, describe its basic approach, and provide detail on how it works. The EFP is a regulatory accounting model that projects electricity prices. The model first solves for revenue requirements by building up a rate base, calculating a return on rate base, and adding the allowed expenses. Average revenues (prices) are calculated based on assumptions regarding regulator lag and customer cost allocation methods. The model then solves for the internal cash flow and analyzes the need for external financing to meet necessary capital expenditures. Finally, the EFP builds up the financial statements. The EFP is used in conjunction with the National Energy Modeling System (NEMS). Inputs to the EFP include the forecast generating capacity expansion plans, operating costs, regulator environment, and financial data. The outputs include forecasts of income statements, balance sheets, revenue requirements, and electricity prices.

  11. Building Performance Simulation

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    WeatherImpactonPeakElectricityDemand andEnergyUsevariables and monthly electricity demand. Appl Energy 2012;onthe peak electricity demandthanontheenergyusein

  12. 309 Building transition plan

    SciTech Connect (OSTI)

    Graves, C.E.

    1994-08-31

    The preparation for decontamination and decommissioning (transition) of the 309 Building is projected to be completed by the end of the fiscal year (FY) 1998. The major stabilization and decontamination efforts include the Plutonium Recycle Test Reactor (PRTR), fuel storage and transfer pits, Transfer Waste (TW) tanks and the Ion Exchange Vaults. In addition to stabilizing contaminated areas, equipment, components, records, waste products, etc., will be dispositioned. All nonessential systems, i.e., heating, ventilation, and air conditioning (HVAC), electrical, monitoring, fluids, etc., will be shut down and drained/de-energized. This will allow securing of the process, laboratory, and office areas of the facility. After that, the facility will be operated at a level commensurate with its surveillance needs while awaiting D&D. The implementation costs for FY 1995 through FY 1998 for the transition activities are estimated to be $1,070K, $2,115K, $2,939K, and $4,762K, respectively. Costs include an assumed company overhead of 20% and a 30% out year contingency.

  13. Distributed Generation in Buildings (released in AEO2005)

    Reports and Publications (EIA)

    2008-01-01

    Currently, distributed generation provides a very small share of residential and commercial electricity requirements in the United States. The Annual Energy Outlook 2005 reference case projects a significant increase in electricity generation in the buildings sector, but distributed generation is expected to remain a small contributor to the sectors energy needs. Although the advent of higher energy prices or more rapid improvement in technology could increase the use of distributed generation relative to the reference case projection, the vast majority of electricity used in buildings is projected to continue to be purchased from the grid.

  14. Optimal Planning and Operation of Smart Grids with Electric Vehicle Interconnection

    E-Print Network [OSTI]

    Stadler, Michael

    2012-01-01

    Planning and Operation of Smart Grids with Electric VehiclePlanning and Operation of Smart Grids with Electric Vehicleenergy costs at the smart grid or commercial building due to

  15. Do LEED-certified buildings save energy? Not really. . . John H. Scofield *

    E-Print Network [OSTI]

    Scofield, John H.

    Do LEED-certified buildings save energy? Not really. . . John H. Scofield * Department of Physics consumed off-site in generating and delivering electric energy to the building, whose inclusion is crucial (USGBC) introduced the Leadership in Energy and Environmental Design (LEED) building rating system. While

  16. Machine Learning Techniques Applied to Sensor Data Correction in Building Technologies

    E-Print Network [OSTI]

    Wang, Xiaorui "Ray"

    and commercial buildings consume 41% of the primary energy (72% electricity) in the U.S. Retrofitting inefficient buildings with new and innovative technologies that help to curb energy consumption will reduceMachine Learning Techniques Applied to Sensor Data Correction in Building Technologies Matt K

  17. electrical, engineering

    E-Print Network [OSTI]

    school of electrical, computer and energy engineering Annual Report 2012-2013 Breaking the final systems engineering Marco Santello, School Director enrollment 930 undergraduate 771 graduate 159 DEGREE PROGRAM biomedical engineering (Harrington Bioengineering program) school of computing, informatics

  18. Electrical, Engineering

    E-Print Network [OSTI]

    School of Electrical, Computer and Energy Engineering 2009-2010 Annual Report #12;Organizational Structure for Ira A. Fulton Schools of Engineering Schools (Director) Lead These Engineering Undergraduate Degree Programs Coordinate Across Engineering for These Grand Challenge Areas... Biological & Health

  19. Engineering Electrical &

    E-Print Network [OSTI]

    Hickman, Mark

    Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2011 Eight Required Courses Chart: 120 points College

  20. Engineering Electrical &

    E-Print Network [OSTI]

    Hickman, Mark

    Computer Engineering Electrical & Electronic Engineering Mechatronics Engineering Mechanical Engineering Civil Engineering Natural Resources Engineering Forest Engineering Chemical & Process Engineering ELECTIVE 2 Required Engineering Intermediate Year 2012 Eight Required Courses Chart: 120 points College

  1. Joseph Vance Building, The

    High Performance Buildings Database

    Seattle, WA In 2006, the Rose Smart Growth Investment Fund acquired the historic Joseph Vance Building with the purpose of transforming it into "the leading green and historic class B" building in the marketplace. The terra cotta Vance Building was constructed in 1929 and has 14 floors - 13 floors of offices over ground-floor retail with a basement for mechanical equipment and storage. In 2009 the U.S. Green Building Council (USGBC) awarded the Vance Building LEED for Existing Buildings (EB) Gold certification.

  2. Electric generator

    DOE Patents [OSTI]

    Foster, Jr., John S. (Pleasanton, CA); Wilson, James R. (Livermore, CA); McDonald, Jr., Charles A. (Danville, CA)

    1983-01-01

    1. In an electrical energy generator, the combination comprising a first elongated annular electrical current conductor having at least one bare surface extending longitudinally and facing radially inwards therein, a second elongated annular electrical current conductor disposed coaxially within said first conductor and having an outer bare surface area extending longitudinally and facing said bare surface of said first conductor, the contiguous coaxial areas of said first and second conductors defining an inductive element, means for applying an electrical current to at least one of said conductors for generating a magnetic field encompassing said inductive element, and explosive charge means disposed concentrically with respect to said conductors including at least the area of said inductive element, said explosive charge means including means disposed to initiate an explosive wave front in said explosive advancing longitudinally along said inductive element, said wave front being effective to progressively deform at least one of said conductors to bring said bare surfaces thereof into electrically conductive contact to progressively reduce the inductance of the inductive element defined by said conductors and transferring explosive energy to said magnetic field effective to generate an electrical potential between undeformed portions of said conductors ahead of said explosive wave front.

  3. Open Automated Demand Response for Small Commerical Buildings

    SciTech Connect (OSTI)

    Dudley, June Han; Piette, Mary Ann; Koch, Ed; Hennage, Dan

    2009-05-01

    This report characterizes small commercial buildings by market segments, systems and end-uses; develops a framework for identifying demand response (DR) enabling technologies and communication means; and reports on the design and development of a low-cost OpenADR enabling technology that delivers demand reductions as a percentage of the total predicted building peak electric demand. The results show that small offices, restaurants and retail buildings are the major contributors making up over one third of the small commercial peak demand. The majority of the small commercial buildings in California are located in southern inland areas and the central valley. Single-zone packaged units with manual and programmable thermostat controls make up the majority of heating ventilation and air conditioning (HVAC) systems for small commercial buildings with less than 200 kW peak electric demand. Fluorescent tubes with magnetic ballast and manual controls dominate this customer group's lighting systems. There are various ways, each with its pros and cons for a particular application, to communicate with these systems and three methods to enable automated DR in small commercial buildings using the Open Automated Demand Response (or OpenADR) communications infrastructure. Development of DR strategies must consider building characteristics, such as weather sensitivity and load variability, as well as system design (i.e. under-sizing, under-lighting, over-sizing, etc). Finally, field tests show that requesting demand reductions as a percentage of the total building predicted peak electric demand is feasible using the OpenADR infrastructure.

  4. Building America Webinar: Saving Energy in Multifamily Buildings...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ventilation Strategies in Multifamily Buildings Webinar Building America Webinar: Advanced Envelope Research for Factory-Built Housing Building America Webinar: Ventilation in...

  5. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Savers [EERE]

    Top Innovations Hall of Fame Profile - Building Energy Optimization Analysis Method (BEopt) Building America Top Innovations Hall of Fame Profile - Building Energy Optimization...

  6. Building America Top Innovations Hall of Fame Profile - Building...

    Energy Savers [EERE]

    Top Innovations Hall of Fame Profile - Building America's Top Innovations Propel the Home Building Industry toward Higher Performance Building America Top Innovations Hall of Fame...

  7. 1999 Commercial Buildings Characteristics--Building Shell and...

    U.S. Energy Information Administration (EIA) Indexed Site

    & Practices > Building Shell & Lighting Conservation Features Building Shell and Lighting Conservation Features The 1999 CBECS collected information on two types of building shell...

  8. Trends in Commercial Buildings--Buildings and Floorspace

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    activity. Number of Commercial Buildings In 1979, the Nonresidential Buildings Energy Consumption Survey estimated that there were 3.8 million commercial buildings in the...

  9. The Building (First Amendment) Regulations 1965

    E-Print Network [OSTI]

    Pannell, Charles

    1965-01-01

    STATUTORY INSTRUMENTS 1965 No. 2184 BUILDING AND BUILDINGS The Building (First Amendment) Regulations 1965

  10. Building Energy Code

    Broader source: Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energys (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more deta...

  11. Change in historic buildings

    E-Print Network [OSTI]

    Yin, Chien-Ni

    1992-01-01

    Change in historic buildings is inevitable. If these changes are not well-managed, the cityscape will be threatened because a city is composed of buildings. A good city should combine both growth and preservation. Controlling ...

  12. Better Buildings Summit 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Summit is a national meeting where Better Buildings partners, including AMOs Better Plants Program partners, and leading organizations can exchange best practices and showcase...

  13. 2015 Better Buildings Summit

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy's Better Buildings Summit is a national meeting where leading organizations across key sectors showcase solutions to cut energy intensity in their buildings portfolio...

  14. Building America Report Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Renewable Energy Prepared by Sam Rashkin Building Technologies Office 950 L'Enfant Building, 6 th floor Washington, DC 20024 May 2014 iii iv Table of Contents List of...

  15. Special Building Renovations

    Broader source: Energy.gov [DOE]

    A number of building types have specific energy uses and needs, and as such the renewable opportunities may be different from a typical office building. This section briefly discusses the following...

  16. Guam- Building Energy Code

    Broader source: Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energys (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  17. Building Energy Code

    Broader source: Energy.gov [DOE]

    Missouri does not have a statewide building or energy code for private residential and commercial buildings, andthere currently is no state regulatory agency authorized to promulgate, adopt, or...

  18. Building Energy Code

    Broader source: Energy.gov [DOE]

    In 2009S.B. 1182created theOklahoma Uniform Building Code Commission. The 11-member Commission was given the power to conduct rulemaking processes to adopt new building codes. The codes adopted...

  19. Building Energy Code

    Broader source: Energy.gov [DOE]

    Note: Much of the information presented in this summary is drawn from the U.S. Department of Energys (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  20. Building Energy Code

    Broader source: Energy.gov [DOE]

    Much of the information presented in this summary is drawn from the U.S. Department of Energys (DOE) Building Energy Codes Program and the Building Codes Assistance Project (BCAP). For more...

  1. Building Energy Code

    Broader source: Energy.gov [DOE]

    Prior to 1997, South Carolina's local governments adopted and enforced the building codes. In 1997, the law required statewide use of the most up-to-date building codes, which then required the...

  2. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Kentucky Building Code (KBC) is updated every three years on a cycle one year behind the publication year for the International Building Code. Any changes to the code by the state of Kentucky...

  3. Building Energy Code

    Broader source: Energy.gov [DOE]

    The 2012 IECC is in effect for all residential and commercial buildings, Idaho schools, and Idaho jurisdictions that adopt and enforce building codes, unless a local code exists that is more...

  4. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Florida Building Commission (FBC) is directed to adopt, revise, update, and maintain the Florida Building Code in accordance with Chapter 120 of the state statutes. The code is mandatory...

  5. Building Energy Code

    Broader source: Energy.gov [DOE]

    Public Act 093-0936 (Illinois Energy Conservation Code for Commercial Buildings) was signed into law in August, 2004. The Illinois Energy Conservation Code for Commercial Buildings became effective...

  6. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Massachusetts Board of Building Regulations and Standards has authority to promulgate the Massachusetts State Building Code (MSBC). The energy provisions in the MSBC were developed by the Boa...

  7. Building Energy Code

    Broader source: Energy.gov [DOE]

    The Virginia Uniform Statewide Building Code (USBC) is a statewide minimum requirement that local jurisdictions cannot amend. The code is applicable to all new buildings in the commonwealth. The...

  8. Building condition monitoring

    E-Print Network [OSTI]

    Samouhos, Stephen V. (Stephen Vincent), 1982-

    2010-01-01

    The building sector of the United States currently consumes over 40% of the United States primary energy supply. Estimates suggest that between 5 and 30% of any building's annual energy consumption is unknowingly wasted ...

  9. Financing green buildings

    E-Print Network [OSTI]

    Pierce, Christopher John, S.M. Massachusetts Institute of Technology

    2013-01-01

    An emerging trend in real estate is the development of sustainable buildings, partially due to the huge environmental impact of the design, construction and operation of commercial buildings. This thesis provides a brief ...

  10. Building America System Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America System Research Eric Werling, DOE Ren Anderson, NREL eric.werling@ee.doe.gov, 202-586-0410 ren.anderson@nrel.gov, 303-384-7443 April 2, 2013 Building America...

  11. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01

    cost savings in energy efficient buildings. To test for thisrisk inherent in energy efficient buildings. Importantly,of energy-efficient and sustainable buildings through

  12. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    methodology for building energy data definition, collection,analyze good building energy data to provide valuable and9 AStandardBuildingEnergyData

  13. The Economics of Green Building

    E-Print Network [OSTI]

    Eichholtz, Piet; Kok, Nils; Quigley, John M.

    2010-01-01

    Benjamin. "Do LEED-Certified Buildings Save Energy? Yes,But,." Energy and Buildings, 2009, 41, pp. 897-905. Royalrating, and publicizing buildings along these dimensions (

  14. Federal Buildings Supplemental Survey 1993

    U.S. Energy Information Administration (EIA) Indexed Site

    4. Energy Conservation Features in FBSS Building in Federal Region 3, Number of Buildings and Floorspace, 1993 Total Floorspace Number of Buildings (thousand square feet) Any Any...

  15. Principal Building Activities--1995 CBECS

    U.S. Energy Information Administration (EIA) Indexed Site

    Detailed Tables > Principal Building Activities Table Number of Buildings, Total Floorspace, and Total Site and Primary Energy Consumption for All Principal Building Activities,...

  16. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    Summer Study on Energy Efficiency in Buildings. LBNL (2012).Summer Study on Energy Efficiency in Buildings. UNEP (2009).Standard for Energy Efficiency of Public Buildings. Energy

  17. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01

    improving energy efficiency of buildings is being addressedimprovement of energy efficiency in buildings are brieflyimproving the energy efficiency of buildings in the U.S. New

  18. Advanced Building Systems & Architectural Design

    E-Print Network [OSTI]

    Subramanian, Venkat

    primary research interests are whole building performance analysis, passive Advanced Building Systems & Architectural Design University with a Ph.D. in Building Performance and Diagnostics. Currently he

  19. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    exchangeofbuildingenergyperformancedatadifficult. understand building energy performance and improvetounderstandingbuildingenergyperformanceandsupporting

  20. Building Energy Monitoring and Analysis

    E-Print Network [OSTI]

    Hong, Tianzhen

    2014-01-01

    exchangeofbuildingenergyperformancedatadifficult. understand building energy performance and improveReliable Building Energy PerformanceCharacterization

  1. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01

    I Figure 21. Sample building energy use label expressed inanalyses of actual buildings energy consumption data confirm1983. PROGRESS IN ENERGY EFFICIENT BUILDINGS Leonard W. Wall

  2. Health Care Buildings: Subcategories Table

    U.S. Energy Information Administration (EIA) Indexed Site

    Subcategories Table Selected Data by Type of Health Care Building Number of Buildings (thousand) Percent of Buildings Floorspace (million square feet) Percent of Floorspace Square...

  3. Kiowa County Commons Building

    Office of Energy Efficiency and Renewable Energy (EERE)

    This poster describes the energy efficiency features and sustainable materials used in the Kiowa County Commons Building in Greensburg, Kansas.

  4. Building Abbreviations Alumni Hall

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    20A/B 44 20A/B 44 20A/B 44 58 17 17 88 34 25 Building Abbreviations Alumni Hall Campbell Dome Colden FitzGerald Gym Frese Hall G Building Gertz Center Goldstein Theatre Honors Hall GC GB GT HH MU KY KG KS KP PH I Building Jefferson Hall Kiely Hall King Hall Kissena Hall Klapper Hall Music Building

  5. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01

    CHP, which can improve overall efficiency significantly. In many climates, using the waste heat to cool buildings

  6. Building Energy Code

    Broader source: Energy.gov [DOE]

    In March 2006, SB 459 was enacted to promote renewable energy and update the state's building energy codes.

  7. Building Operator Certification

    E-Print Network [OSTI]

    Lilley, D.

    2013-01-01

    Certification Energy Efficiency through Operator Training CATEE December 18, 2013 San Antonio, TX Dennis Lilley, CEM, PMP ESL-KT-13-12-49 CATEE 2013: Clean Air Through Energy Efficiency Conference, San Antonio, Texas Dec. 16-18 Building Operator Certification... Energy Efficiency through Operator Training What is Building Operator Certification? Industry-recognized credential in energy efficient building operation practices Created with 100 industry experts Launched in 1996 9,000 building engineers...

  8. Jackson Park Hospital Green Building Medical Center

    SciTech Connect (OSTI)

    William Dorsey; Nelson Vasquez

    2010-03-31

    Jackson Park Hospital completed the construction of a new Medical Office Building on its campus this spring. The new building construction has adopted the City of Chicago's recent focus on protecting the environment, and conserving energy and resources, with the introduction of green building codes. Located in a poor, inner city neighborhood on the South side of Chicago, Jackson Park Hospital has chosen green building strategies to help make the area a better place to live and work. The new green building houses the hospital's Family Medicine Residency Program and Specialty Medical Offices. The residency program has been vital in attracting new, young physicians to this medically underserved area. The new outpatient center will also help to allure needed medical providers to the community. The facility also has areas designated to women's health and community education. The Community Education Conference Room will provide learning opportunities to area residents. Emphasis will be placed on conserving resources and protecting our environment, as well as providing information on healthcare access and preventive medicine. The new Medical Office Building was constructed with numerous energy saving features. The exterior cladding of the building is an innovative, locally-manufactured precast concrete panel system with integral insulation that achieves an R-value in excess of building code requirements. The roof is a 'green roof' covered by native plantings, lessening the impact solar heat gain on the building, and reducing air conditioning requirements. The windows are low-E, tinted, and insulated to reduce cooling requirements in summer and heating requirements in winter. The main entrance has an air lock to prevent unconditioned air from entering the building and impacting interior air temperatures. Since much of the traffic in and out of the office building comes from the adjacent Jackson Park Hospital, a pedestrian bridge connects the two buildings, further decreasing the amount of unconditioned air that enters the office building. The HVAC system has an Energy Efficiency Rating 29% greater than required. No CFC based refrigerants were used in the HVAC system, thus reducing the emission of compounds that contribute to ozone depletion and global warming. In addition, interior light fixtures employ the latest energy-efficient lamp and ballast technology. Interior lighting throughout the building is operated by sensors that will automatically turn off lights inside a room when the room is unoccupied. The electrical traction elevators use less energy than typical elevators, and they are made of 95% recycled material. Further, locally manufactured products were used throughout, minimizing the amount of energy required to construct this building. The primary objective was to construct a 30,000 square foot medical office building on the Jackson Park Hospital campus that would comply with newly adopted City of Chicago green building codes focusing on protecting the environment and conserving energy and resources. The energy saving systems demonstrate a state of the-art whole-building approach to energy efficient design and construction. The energy efficiency and green aspects of the building contribute to the community by emphasizing the environmental and economic benefits of conserving resources. The building highlights the integration of Chicago's new green building codes into a poor, inner city neighborhood project and it is designed to attract medical providers and physicians to a medically underserved area.

  9. Electrically powered hand tool

    DOE Patents [OSTI]

    Myers, Kurt S.; Reed, Teddy R.

    2007-01-16

    An electrically powered hand tool is described and which includes a three phase electrical motor having a plurality of poles; an electrical motor drive electrically coupled with the three phase electrical motor; and a source of electrical power which is converted to greater than about 208 volts three-phase and which is electrically coupled with the electrical motor drive.

  10. Archive Reference Buildings by Building Type: Primary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  11. Archive Reference Buildings by Building Type: Secondary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  12. Archive Reference Buildings by Building Type: Stand-alone retail

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  13. Archive Reference Buildings by Building Type: Fast food

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  14. Archive Reference Buildings by Building Type: Small office

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  15. Archive Reference Buildings by Building Type: Strip mall

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  16. Archive Reference Buildings by Building Type: Large office

    Office of Energy Efficiency and Renewable Energy (EERE)

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  17. Assessing and Reducing Miscellaneous Electric Loads (MELs) in Lodging

    SciTech Connect (OSTI)

    Rauch, Emily M.

    2011-09-01

    Miscellaneous electric loads (MELs) are the loads outside of a building's core functions of heating, ventilating, air conditioning, lighting, and water heating. This report reviews methods to reduce MELs in lodging.

  18. Sales and Use Tax Exemption for Electrical Generating Facilities

    Broader source: Energy.gov [DOE]

    Electrical generating facilities are exempt from sales and use taxes in North Dakota. The exemption is granted for the purchase of building materials, production equipment, and any other tangible...

  19. Electric vehicle design, racing and distance to empty algorithms

    E-Print Network [OSTI]

    Rodgers, Lennon Patrick

    2013-01-01

    This research began with the goal of designing and building an electric motorcycle to compete in the Isle of Man TT Zero race. A set of parametric physics-based models was derived to size the batteries and motors, predict ...

  20. Evaluating Policies to Increase Electricity Generation from Renewable Energy

    E-Print Network [OSTI]

    Schmalensee, Richard

    Building on a review of experience in the United States and the European Union, this article advances four main propositions concerning policies aimed at increasing electricity generation from renewable energy. First, who ...

  1. Passive solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1992-10-01

    Developments in passive solar buildings that took place from the early 1970`s through 1989 are described. Much of the work covered was federally sponsored during the period 1975 through 1986. About half the volume is devoted to quantitative methods for modeling, simulation, and design analysis of passive buildings; the other half summarizes the quantitative results of testing and monitoring of models and buildings. The following are covered: building solar gain modeling, simulation analysis, simplified methods, materials and components, analytical results for specific systems, test modules, building integration, performance monitoring and results, and design tools. (MHR)

  2. Passive solar buildings

    SciTech Connect (OSTI)

    Balcomb, J.D. )

    1992-01-01

    Developments in passive solar buildings that took place from the early 1970's through 1989 are described. Much of the work covered was federally sponsored during the period 1975 through 1986. About half the volume is devoted to quantitative methods for modeling, simulation, and design analysis of passive buildings; the other half summarizes the quantitative results of testing and monitoring of models and buildings. The following are covered: building solar gain modeling, simulation analysis, simplified methods, materials and components, analytical results for specific systems, test modules, building integration, performance monitoring and results, and design tools. (MHR)

  3. Thermal Batteries for Electric Vehicles

    SciTech Connect (OSTI)

    2011-11-21

    HEATS Project: UT Austin will demonstrate a high-energy density and low-cost thermal storage system that will provide efficient cabin heating and cooling for EVs. Compared to existing HVAC systems powered by electric batteries in EVs, the innovative hot-and-cold thermal batteries-based technology is expected to decrease the manufacturing cost and increase the driving range of next-generation EVs. These thermal batteries can be charged with off-peak electric power together with the electric batteries. Based on innovations in composite materials offering twice the energy density of ice and 10 times the thermal conductivity of water, these thermal batteries are expected to achieve a comparable energy density at 25% of the cost of electric batteries. Moreover, because UT Austins thermal energy storage systems are modular, they may be incorporated into the heating and cooling systems in buildings, providing further energy efficiencies and positively impacting the emissions of current building heating/cooling systems.

  4. PROGRESS IN ENERGY EFFICIENT BUILDINGS

    E-Print Network [OSTI]

    Wall, L.W.

    2009-01-01

    addressed by the Buildings Energy Data (BED) Group at LBL.buildings by the Buildings Energy Data (BED) Group at LBL,results from our buildings energy data bases. Actual energy

  5. Commercial Building Asset Rating Program

    Broader source: Energy.gov [DOE]

    Slides from a Commercial Building Initiative webinar outlining the Commercial Building Asset Rating Program on August 23, 2011.

  6. Building Technologies | Clean Energy | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Systems Biology Transportation Clean Energy Home | Science & Discovery | Clean Energy | Research Areas | Buildings SHARE Building Technologies Reducing the energy...

  7. Modeling Electric Vehicle Benefits Connected to Smart Grids

    SciTech Connect (OSTI)

    Stadler, Michael; Marnay, Chris; Mendes, Goncalo; Kloess, Maximillian; Cardoso, Goncalo; Mgel, Olivier; Siddiqui, Afzal

    2011-07-01

    Connecting electric storage technologies to smartgrids will have substantial implications in building energy systems. Local storage will enable demand response. Mobile storage devices in electric vehicles (EVs) are in direct competition with conventional stationary sources at the building. EVs will change the financial as well as environmental attractiveness of on-site generation (e.g. PV, or fuel cells). In order to examine the impact of EVs on building energy costs and CO2 emissions in 2020, a distributed-energy-resources adoption problem is formulated as a mixed-integer linear program with minimization of annual building energy costs or CO2 emissions. The mixed-integer linear program is applied to a set of 139 different commercial buildings in California and example results as well as the aggregated economic and environmental benefits are reported. The research shows that considering second life of EV batteries might be very beneficial for commercial buildings.

  8. About Singapore Green Building Council

    E-Print Network [OSTI]

    - friendly, energy efficiency building materials, design and architecture reaching out to Green buildingAbout Singapore Green Building Council About SGBC Green Building Conference Conference Programme Green Building Conference In line with the mission of the Singapore Green Building Council (SGBC

  9. Evaluation of Public Service Electric & Gas Company`s standard offer program, Volume I

    SciTech Connect (OSTI)

    Goldman, C.A.; Kito, M.S.; Moezzi, M.M.

    1995-07-01

    In May 1993, Public Service Electric and Gas (PSE&G), the largest investor-owned utility in New Jersey, initiated the Standard Offer program, an innovative approach to acquiring demand-side management (DSM) resources. In this program, PSE&G offers longterm contracts with standard terms and conditions to project sponsors, either customers or third-party energy service companies (ESCOs), on a first-come, first-serve basis to fill a resource block. The design includes posted, time-differentiated prices which are paid for energy savings that will be verified over the contract term (5, 10, or 15 years) based on a statewide measurement and verification (M&V) protocol. The design of the Standard Offer differs significantly from DSM bidding programs in several respects. The eligibility requirements and posted prices allow ESCOs and other energy service providers to market and develop projects among customers with few constraints on acceptable end use efficiency technologies. In contrast, in DSM bidding, ESCOs typically submit bids without final commitments from customers and the utility selects a limited number of winning bidders who often agree to deliver a pre-specified mix of savings from various end uses in targeted markets. The major objectives of the LBNL evaluation were to assess market response and customer satisfaction; analyze program costs and cost-effectiveness; review and evaluate the utility`s administration and delivery of the program; examine the role of PSE&G`s energy services subsidiary (PSCRC) in the program and the effect of its involvement on the development of the energy services industry in New Jersey; and discuss the potential applicability of the Standard Offer concept given current trends in the electricity industry (i.e., increasing competition and the prospect of industry restructuring).

  10. Smart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring

    E-Print Network [OSTI]

    Wang, Yongcai

    in such buildings, researches in the field of smart building and smart grid are exploring an efficient energy high costs to the smart meter deploy- ment, data collection and system maintenance. In practiceSmart Meter Deployment Optimization for Efficient Electrical Appliance State Monitoring Xiaohong

  11. Connector device for building integrated photovoltaic device

    DOE Patents [OSTI]

    Keenihan, James R.; Langmaid, Joe A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleerman, Robert J.; Gaston, Ryan S.

    2015-11-10

    The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.

  12. Connector device for building integrated photovoltaic device

    SciTech Connect (OSTI)

    Keenihan, James R.; Langmaid, Joseph A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleereman, Robert J.; Gaston, Ryan S.

    2014-06-03

    The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.

  13. Energy consumption series: Lighting in commercial buildings

    SciTech Connect (OSTI)

    Not Available

    1992-03-11

    Lighting represents a substantial fraction of commercial electricity consumption. A wide range of initiatives in the Department of Energy`s (DOE) National Energy Strategy have focused on commercial lighting as a potential source of energy conservation. This report provides a statistical profile of commercial lighting, to examine the potential for lighting energy conservation in commercial buildings. The principal conclusion from this analysis is that energy use for lighting could be reduced by as much as a factor of four using currently available technology. The analysis is based primarily on the Energy Information Administration`s (EIA) 1986 Commercial Buildings Energy Consumption Survey (CBECS). The more recent 1989 survey had less detail on lighting, for budget reasons. While changes have occurred in the commercial building stock since 1986, the relationships identified by this analysis are expected to remain generally valid. In addition, the analytic approach developed here can be applied to the data that will be collected in the 1992 CBECS.

  14. A Fresh Look at Weather Impact on Peak Electricity Demand and

    E-Print Network [OSTI]

    LBNL-6280E A Fresh Look at Weather Impact on Peak Electricity Demand and Energy Use of Buildings at Weather Impact on Peak Electricity Demand and Energy Use of Buildings Using 30-Year Actual Weather Data Road, Berkeley, CA 94720, USA 2 Green Energy and Environment Research Laboratories, Industrial

  15. High Temperatures & Electricity Demand

    E-Print Network [OSTI]

    High Temperatures & Electricity Demand An Assessment of Supply Adequacy in California Trends.......................................................................................................1 HIGH TEMPERATURES AND ELECTRICITY DEMAND.....................................................................................................................7 SECTION I: HIGH TEMPERATURES AND ELECTRICITY DEMAND ..........................9 BACKGROUND

  16. Capacity Markets for Electricity

    E-Print Network [OSTI]

    Creti, Anna; Fabra, Natalia

    2004-01-01

    England and Wales Electricity Market, Power Working PaperFelder (1996), Should Electricity Markets Have a Capacityand Competitive Electricity Markets, mimeo, IDEI, available

  17. Capacity Markets for Electricity

    E-Print Network [OSTI]

    Creti, Anna; Fabra, Natalia

    2004-01-01

    and design of electricity capacity markets. Our work has twoMarkets for Electricity capacity markets, and so, when thesemain features of electricity capacity markets. We have used

  18. Retail Electricity Competition

    E-Print Network [OSTI]

    Joskow, Paul; Tirole, Jean

    2004-01-01

    Reliability and Competitive Electricity Markets mimeo, MITCSEM WP 130 Retail Electricity Competition * Paul Joskow andwww.ucei.org Retail Electricity Competition ? Paul Joskow

  19. Designing Electricity Auctions

    E-Print Network [OSTI]

    Fabra, Natalia; von der Fehr, Nils-Henrik; Harbord, David

    2004-01-01

    market performance in electricity auctions, it appears thatMcSorely (2001) Regulating Electricity Markets: Experiencethe United Kingdom, The Electricity Journal, December, 81-

  20. De Minimis Thresholds for Federal Building Metering Appropriateness

    SciTech Connect (OSTI)

    Henderson, Jordan W.

    2015-03-31

    The U.S. Department of Energy (DOE) is required by statute and Presidential Memorandum to establish guidelines for agencies to meter their Federal buildings for energy (electricity, natural gas, and steam) and water. See 42 U.S.C. 8253(e). DOE issued guidance in February 2006 on the installation of electric meters in Federal buildings. A recent update to the 2006 guidance accounts for more current metering practices within the Federal Government. The updated metering guidance specifies that all Federal buildings shall be considered appropriate for energy or water metering unless identified for potential exclusion. In developing the updated guidance to carry out the statue, Congress also directed DOE to (among other things) establish exclusions from the metering requirements based on the de minimis quantity of energy use of a Federal building, industrial process, or structure. This paper discusses the method used to identify de minimis values.

  1. Electrical Safety

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based|DepartmentStatementofApril 25,EVtheEnergyPreparedElectricalNOT

  2. A View on Future Building System Modeling and Simulation

    SciTech Connect (OSTI)

    Wetter, Michael

    2011-04-01

    This chapter presents what a future environment for building system modeling and simulation may look like. As buildings continue to require increased performance and better comfort, their energy and control systems are becoming more integrated and complex. We therefore focus in this chapter on the modeling, simulation and analysis of building energy and control systems. Such systems can be classified as heterogeneous systems because they involve multiple domains, such as thermodynamics, fluid dynamics, heat and mass transfer, electrical systems, control systems and communication systems. Also, they typically involve multiple temporal and spatial scales, and their evolution can be described by coupled differential equations, discrete equations and events. Modeling and simulating such systems requires a higher level of abstraction and modularisation to manage the increased complexity compared to what is used in today's building simulation programs. Therefore, the trend towards more integrated building systems is likely to be a driving force for changing the status quo of today's building simulation programs. Thischapter discusses evolving modeling requirements and outlines a path toward a future environment for modeling and simulation of heterogeneous building systems.A range of topics that would require many additional pages of discussion has been omitted. Examples include computational fluid dynamics for air and particle flow in and around buildings, people movement, daylight simulation, uncertainty propagation and optimisation methods for building design and controls. For different discussions and perspectives on the future of building modeling and simulation, we refer to Sahlin (2000), Augenbroe (2001) and Malkawi and Augenbroe (2004).

  3. Solutions for Summer Electric Power Shortages: Demand Response and its Applications in Air Conditioning and Refrigerating Systems

    E-Print Network [OSTI]

    Han, Junqiao; Piette, Mary Ann

    2008-01-01

    for DR and demand side management, along with operationalresponse), DSM (demand side management), DR strategy, air

  4. The Challenge Domestic solar panels produce electricity

    E-Print Network [OSTI]

    Crowther, Paul

    of lower electricity costs and reduced dependence on fossil fuels. The Collaboration Brooks Devlin University of Sheffield `Building for the Future' Innovation Awards, designed to give SMEs the opportunity to access research expertise and facilities. Projects were aimed at developing innovative products

  5. Critical Electric Power Issues in Pennsylvania

    E-Print Network [OSTI]

    of PennFuture #12;Rachel Carson State Office Building P.O. Box 2063 Harrisburg, PA 17105-2063 December 1 of electric power in the nation, and Pennsylvania is home to abundant indigenous fuel sources such as wind Utility Commission to promulgate regulations to ease the implementation of small-scale distributed power

  6. The Lovejoy Building

    High Performance Buildings Database

    Portland, Oregon Originally built in 1910 as the stables for the Marshall-Wells Hardware Company, the Lovejoy Building is the home of Opsis Architects. The owner/architects purchased and renovated the historic building to house their growing business and to provide ground-floor office lease space and second-floor offices for their firm. Opsis wanted to use the building to experience and demonstrate the technologies and practices it promotes with clients.

  7. Transamerica Pyramid Building

    SciTech Connect (OSTI)

    2010-04-01

    This is a combined heat and power (CHP) project profile on a 1 MW CCHP system at the Transamerica Pyramid Building in San Francisco, California.

  8. Residential Buildings Integration (RBI)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 RBI Priorities for FY15 and Beyond Integrating Advanced Technologies for Homes: * Building integrated renewables * IAQVentilation solutions * Integrated high performance...

  9. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Motivation and Computation of Lighting Measures Floorspace by Lighting Equipment Configuration As described in Appendix A, for each building b, the CBECS data set has the total...

  10. Buildings Performance Database

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    distinguish between expected returns and performance risk Conduct performance risk analysis * Diversify risk by investing in a range of buildings and measures Support...

  11. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    more comprehensive understanding of commercial lighting and the potential for lighting energy savings. Steps to build on this analysis can be taken in many directions. One...

  12. Commercial Buildings Characteristics 1992

    U.S. Energy Information Administration (EIA) Indexed Site

    the sponsor the government, utility or sponsored in-house. Energy Management and Control System Heating or cooling system monitored or controlled by a computerized building...

  13. Buildings Interoperability Proceedings

    Broader source: Energy.gov (indexed) [DOE]

    for t he integration of intelligent, connected buildings equipment and automation s ystems, understanding the importance of integration frameworks and product...

  14. Building bridges for fish

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building-bridges-for-fish Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects & Initiatives...

  15. What is Building America?

    ScienceCinema (OSTI)

    None

    2013-07-22

    DOE's Building America program is helping to bridge the gap between homes with high energy costs and homes that are healthy, durable, and energy efficient.

  16. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Illuminance Assignments for CBECS Building Activity Categories Illuminance ranges were adopted from the 1987 Illuminating Engineering Society (IES) Lighting Handbook. The IES...

  17. Building Songs 7

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-10-28

    stream_source_info Sman_shad_building_song_7.doc.pdf.txt stream_content_type text/plain stream_size 2792 Content-Encoding ISO-8859-1 stream_name Sman_shad_building_song_7.doc.pdf.txt Content-Type text/plain; charset=ISO-8859... shad building song 7.WAV Length of track 00:09:57 Related tracks (include description/relationship if appropriate) Title of track Building Songs 7 Translation of title Description (to be used in archive entry) Skar ma chos mdzin sings...

  18. building.ppt

    E-Print Network [OSTI]

    Clarence Wilkerson

    Building Parenting Skills and Interactions with Kangaroo Care. Sharon A. Wilkerson, PhD, RN. Associate Professor of Nursing. Purdue University. West Lafayette...

  19. ORISE: Capacity Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capacity Building Because public health agencies must maintain the resources to respond to public health challenges, critical situations and emergencies, the Oak Ridge Institute...

  20. Lighting in Commercial Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    from the engineering literature, based on CBECS building activity.) 4. Efficacy: an energy efficiency measure. Technically, the amount of light produced per unit of energy...