Powered by Deep Web Technologies
Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Accurate BTU Measurement  

E-Print Network [OSTI]

1 represents a typical arrangement in which heat is supplied to, or absorbed by the difference in temperatures of a working fluid, generally water. (See Ref. 1). Supply (TIl- Supply (Tl1 E E Heat (BTU) He.' ~ Exchange Exchange Relurn (T2... rate (BTU/unit time) ? m Mass flow rate (lb/unit time) hI' h2 = Specific enthalpy of supply and return liquid (BTU/lb) BTU C p - Average specific heat (--~----) IboF Equations 1, 2 are instantaneous values for heat flow or energy transferred...

Hosseini, S.; Rusnak, J. J.

2

BTU Accounting for Industry  

E-Print Network [OSTI]

, salesmen cars, over the highway trucks, facilities startup, waste used as fuel and fuels received for storage. This is a first step in the DOE's effort to establish usage guidelines for large industrial users and, we note, it requires BTU usage data...-generated electricity, heating, ventilating, air conditioning, in-plant transportation, ore hauling, raw material storage and finished product warehousing. Categories which are excluded are corporate and divisional offices, basic research, distribution centers...

Redd, R. O.

1979-01-01T23:59:59.000Z

3

Renewable source controls for grid stability.  

SciTech Connect (OSTI)

The goal of this study was to evaluate the small signal and transient stability of the Western Electric- ity Coordinating Council (WECC) under high penetrations of renewable energy, and to identify control technologies that would improve the system performance. The WECC is the regional entity responsible for coordinating and promoting bulk electric system reliability in the Western Interconnection. Transient stability is the ability of the power system to maintain synchronism after a large disturbance while small signal stability is the ability of the power system to maintain synchronism after a small disturbance. Tran- sient stability analysis usually focuses on the relative rotor angle between synchronous machines compared to some stability margin. For this study we employed generator speed relative to system speed as a metric for assessing transient stability. In addition, we evaluated the system transient response using the system frequency nadir, which provides an assessment of the adequacy of the primary frequency control reserves. Small signal stability analysis typically identi es the eigenvalues or modes of the system in response to a disturbance. For this study we developed mode shape maps for the di erent scenarios. Prony analysis was applied to generator speed after a 1.4 GW, 0.5 second, brake insertion at various locations. Six di erent WECC base cases were analyzed, including the 2022 light spring case which meets the renewable portfolio standards. Because of the di culty in identifying the cause and e ect relationship in large power system models with di erent scenarios, several simulations were run on a 7-bus, 5-generator system to isolate the e ects of di erent con gurations. Based on the results of the study, for a large power system like the WECC, incorporating frequency droop into wind/solar systems provides a larger bene t to system transient response than replacing the lost inertia with synthetic inertia. From a small signal stability perspective, the increase in renewable penetration results in subtle changes to the system modes. In gen- eral, mode frequencies increase slightly, and mode shapes remain similar. The system frequency nadir for the 2022 light spring case was slightly lower than the other cases, largely because of the reduced system inertia. However, the nadir is still well above the minimum load shedding frequency of 59.5 Hz. Finally, several discrepancies were identi ed between actual and reported wind penetration, and additional work on wind/solar modeling is required to increase the delity of the WECC models.

Byrne, Raymond Harry; Elliott, Ryan Thomas; Neely, Jason C.; Silva Monroy, Cesar Augusto; Schoenwald, David Alan; Grant, Lisa

2012-12-01T23:59:59.000Z

4

On the stability of thermonuclear shell sources in stars  

E-Print Network [OSTI]

We present a quantitative criterion for the thermal stability of thermonuclear shell sources. We find the thermal stability of shell sources to depend on exactly three factors: they are more stable when they are geometrically thicker, less degenerate and hotter. This confirms and unifies previously obtained results in terms of the geometry, temperature and density of the shell source, by a simplified but quantitative approach to the physics of shell nuclear burning. We present instability diagrams in the temperature-density plane for hydrogen and helium shell burning, which allow a simple evaluation of the stability conditions of such shell sources in stellar models. The performance of our stability criterion is demonstrated in various numerical models: in a 3 Msun AGB star, in helium accreting CO white dwarfs, in a helium white dwarf which is covered by a thin hydrogen envelope, and in a 1.0 Msun giant.

S. -C. Yoon; N. Langer; M. van der Sluys

2004-06-07T23:59:59.000Z

5

A Requirement for Significant Reduction in the Maximum BTU Input...  

Energy Savers [EERE]

A Requirement for Significant Reduction in the Maximum BTU Input Rate of Decorative Vented Gas Fireplaces Would Impose Substantial Burdens on Manufacturers A Requirement for...

6

Lowest Pressure Steam Saves More BTU's Than You Think  

E-Print Network [OSTI]

ABSTRACT Steam is the most transferring heat from But most steam systems LOWEST PRESSURE STEAM SAVES MORE BTU'S THAN YOU THINK Stafford J. Vallery Armstrong Machine Works Three Rivers, Michigan steam to do the process heating rather than...

Vallery, S. J.

7

Environmental Permitting of a Low-BTU Coal Gasification Facility  

E-Print Network [OSTI]

that merits serious consideration since only relatively small modifications to the existing oil or gas burner system may be required, and boiler derating can be minimized. The environmental permitting and planning process for a low-Btu coal gasification...

Murawczyk, C.; Stewart, J. T.

1983-01-01T23:59:59.000Z

8

Chemical potential as a source of stability for gravitating Skyrmions  

E-Print Network [OSTI]

A discussion of the stability of self gravitating Skyrmions, with a large winding number N, in a Schwarzschild type of metric, is presented for the case where an isospin chemical potential is introduced. It turns out that the chemical potential stabilizes the behavior of the Skyrmion discussed previously in the literature. This analysis is carried on in the framework of a variational approach using different ansaetze for the radial profile of the Skyrmion. We found a divergent behavior for the size of the Skyrmion, associated to a certain critical value $\\mu_c$ of the chemical potential. At this point, the mass of the Skyrmion vanishes. $\\mu_c$ is essentialy independent of gravitating effects. The stability of a large N skyrmion against decays into single particles is also discussed.

M. Loewe; S. Mendizabal; J. C. Rojas

2006-09-13T23:59:59.000Z

9

EIS-0007: Low Btu Coal Gasification Facility and Industrial Park  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy prepared this environmental impact statement which evaluates the potential environmental impacts that may be associated with the construction and operation of a low-Btu coal gasification facility and the attendant industrial park in Georgetown, Scott County, Kentucky.

10

Stabilization of scintillation detector by reference signal from radioactive source  

SciTech Connect (OSTI)

This paper examines the possibility of stabilization of a scintillation detector using an additional detector whose scintillator with respect to the former performs the function of a target, which generates secondary radiation. It is experimentally established that a regulation time constant of 10 sec ensures constancy of the transfer characteristic of the detector with an error of about 1.5% for disturbing effects that correspond to 20% of this characteristic.

Nedavnii, O.I.

1985-05-01T23:59:59.000Z

11

Fuel injection staged sectoral combustor for burning low-BTU fuel gas  

DOE Patents [OSTI]

A high-temperature combustor for burning low-BTU coal gas in a gas turbine is described. The combustor comprises a plurality of individual combustor chambers. Each combustor chamber has a main burning zone and a pilot burning zone. A pipe for the low-BTU coal gas is connected to the upstream end of the pilot burning zone: this pipe surrounds a liquid fuel source and is in turn surrounded by an air supply pipe: swirling means are provided between the liquid fuel source and the coal gas pipe and between the gas pipe and the air pipe. Additional preheated air is provided by counter-current coolant air in passages formed by a double wall arrangement of the walls of the main burning zone communicating with passages of a double wall arrangement of the pilot burning zone: this preheated air is turned at the upstream end of the pilot burning zone through swirlers to mix with the original gas and air input (and the liquid fuel input when used) to provide more efficient combustion. One or more fuel injection stages (second stages) are provided for direct input of coal gas into the main burning zone. The countercurrent air coolant passages are connected to swirlers surrounding the input from each second stage to provide additional oxidant.

Vogt, Robert L. (Schenectady, NY)

1985-02-12T23:59:59.000Z

12

Fuel injection staged sectoral combustor for burning low-BTU fuel gas  

DOE Patents [OSTI]

A high-temperature combustor for burning low-BTU coal gas in a gas turbine is described. The combustor comprises a plurality of individual combustor chambers. Each combustor chamber has a main burning zone and a pilot burning zone. A pipe for the low-BTU coal gas is connected to the upstream end of the pilot burning zone; this pipe surrounds a liquid fuel source and is in turn surrounded by an air supply pipe; swirling means are provided between the liquid fuel source and the coal gas pipe and between the gas pipe and the air pipe. Additional preheated air is provided by counter-current coolant air in passages formed by a double wall arrangement of the walls of the main burning zone communicating with passages of a double wall arrangement of the pilot burning zone; this preheated air is turned at the upstream end of the pilot burning zone through swirlers to mix with the original gas and air input (and the liquid fuel input when used) to provide more efficient combustion. One or more fuel injection stages (second stages) are provided for direct input of coal gas into the main burning zone. The countercurrent air coolant passages are connected to swirlers surrounding the input from each second stage to provide additional oxidant.

Vogt, Robert L. (Schenectady, NY)

1981-01-01T23:59:59.000Z

13

X-ray source assembly having enhanced output stability, and fluid stream analysis applications thereof  

DOE Patents [OSTI]

An x-ray source assembly and method of operation are provided having enhanced output stability. The assembly includes an anode having a source spot upon which electrons impinge and a control system for controlling position of the anode source spot relative to an output structure. The control system can maintain the anode source spot location relative to the output structure notwithstanding a change in one or more operating conditions of the x-ray source assembly. One aspect of the disclosed invention is most amenable to the analysis of sulfur in petroleum-based fuels.

Radley, Ian (Glenmont, NY); Bievenue, Thomas J. (Delmar, NY); Burdett, John H. (Charlton, NY); Gallagher, Brian W. (Guilderland, NY); Shakshober, Stuart M. (Hudson, NY); Chen, Zewu (Schenectady, NY); Moore, Michael D. (Alplaus, NY)

2008-06-08T23:59:59.000Z

14

Property:Geothermal/AnnualGenBtuYr | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug PowerAddressDataFormat JumpNercMroURL. PagesAnnualGenBtuYr

15

High Btu gas from peat. Existing social and economic conditions  

SciTech Connect (OSTI)

In 1980, the Minnesota Gas Company (Minnegasco) submitted a proposal to the US Department of Energy entitled, A Feasibility Study - High Btu Gas from Peat. The proposed study was designed to assess the overall viability of the design, construction and operation of a commercial facility for the production of high-Btu substitute natural gas (SNG) from Minnesota peat. On September 30, 1980, Minnegasco was awarded a grant by the Department of Energy to perform the proposed study. In order to complete the study, Minnegasco assembled an experienced project team with the wide range of expertise required. In addition, the State of Minnesota agreed to participate in an advisory capacity. The items to be investigated by the project team during the feasibility study include peat harvesting, dewatering, gasification process design, economic and risk assessment, site evaluation, environmental and socioeconomic impact assessment. Ertec (The Earth Technology Corporation) was selected to conduct the site evaluation and environmental assessment portions of the feasibility study. The site evaluation was completed in March of 1981 with the submittal of the first of several reports to Minnegasco. This report describes the existing social and economic conditions of the proposed project area in northern Minnesota. The baseline data presented will be used to assess the significance of potential project impacts in subsequent phases of the feasibility study. Wherever possible, the data base was established using 1980 Bureau of Census statistics. However, where the 1980 data were not yet available, the most recent information is presented. 11 figures, 46 tables.

Not Available

1981-08-01T23:59:59.000Z

16

The Mansfield Two-Stage, Low BTU Gasification System: Report of Operations  

E-Print Network [OSTI]

The least expensive way to produce gas from coal is by low Btu gasification, a process by which coal is converted to carbon monoxide and hydrogen by reacting it with air and steam. Low Btu gas, which is used near its point of production, eliminates...

Blackwell, L. T.; Crowder, J. T.

1983-01-01T23:59:59.000Z

17

The effect of CO? on the flammability limits of low-BTU gas of the type obtained from Texas lignite  

E-Print Network [OSTI]

) . If the L. used are the lower limits of 1 the individual components, then Equation (1) will yield the lower flammability limit of the mixture (Zabetakis, 1965) . If the inert gases nitrogen or carbon dioxide are present, the Equation (1) may still... gas cylinders with the exception of the air which was atmospheric. The carbon dioxide, methane, and nitrogen came from commercial sources in high- pressure cylinders. The low-BTU gas consisting of 20. 89% CO, 2 . 65% CH4, 0 . 2% C2H6, 15 . 37% H2...

Gaines, William Russell

1983-01-01T23:59:59.000Z

18

Vol. 30 no. 14 2014, pages 20912092 BIOINFORMATICS MESSAGE FROM THE ISCB doi:10.1093/bioinformatics/btu117  

E-Print Network [OSTI]

.1093/bioinformatics/btu117 Advance Access publication March 3, 2014 The automated function prediction SIG looks back

Radivojac, Predrag

19

Beam extraction and high stability operation of high current electron cyclotron resonance proton ion source  

SciTech Connect (OSTI)

A high current electron cyclotron resonance proton ion source is designed and developed for the low energy high intensity proton accelerator at Bhabha Atomic Research Centre. The plasma discharge in the ion source is stabilized by minimizing the reflected microwave power using four stub auto tuner and magnetic field. The optimization of extraction geometry is performed using PBGUNS code by varying the aperture, shape, accelerating gap, and the potential on the electrodes. While operating the source, it was found that the two layered microwave window (6 mm quartz plate and 2 mm boron nitride plate) was damaged (a fine hole was drilled) by the back-streaming electrons after continuous operation of the source for 3 h at beam current of 20Ė40 mA. The microwave window was then shifted from the line of sight of the back-streaming electrons and located after the water-cooled H-plane bend. In this configuration the stable operation of the high current ion source for several hours is achieved. The ion beam is extracted from the source by biasing plasma electrode, puller electrode, and ground electrode to +10 to +50 kV, ?2 to ?4 kV, and 0 kV, respectively. The total ion beam current of 30Ė40 mA is recorded on Faraday cup at 40 keV of beam energy at 600Ė1000 W of microwave power, 800Ė1000 G axial magnetic field and (1.2Ė3.9) ◊ 10{sup ?3} mbar of neutral hydrogen gas pressure in the plasma chamber. The dependence of beam current on extraction voltage, microwave power, and gas pressure is investigated in the range of operation of the ion source.

Roychowdhury, P., E-mail: pradipr@barc.gov.in; Mishra, L.; Kewlani, H.; Mittal, K. C. [Accelerator and Pulse Power Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)] [Accelerator and Pulse Power Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Patil, D. S. [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)] [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

2014-03-15T23:59:59.000Z

20

Method for producing low and medium BTU gas from coal  

SciTech Connect (OSTI)

A process for producing low and medium BTU gas from carbonizable material is described which comprises: partly devolatizing the material and forming hot incandescent coke therefrom by passing a bed of the same part way through a hot furnace chamber on a first horizontally moving grate while supplying a sub-stoichiometric quantity of air to the same and driving the reactions: C + O/sub 2/ = CO/sub 2/; 2C + O/sub 2/ = 2CO discharging the hot incandescent coke from the end of the first grate run onto a second horizontally moving grate run below the first grate run in the same furnace chamber so as to form a bed thereon, the bed formed on the second grate run being considerably thicker than the bed formed on the first grate run, passing the hot incandescent coke bed on the second grate run further through the furnace chamber in a substantially horizontal direction while feeding air and stream thereto so as to fully burn the coke and in ratio of steam to air driving the following reactions: 2C + O/sub 2/ = 2CO; C + H/sub 2/O = H/sub 2/ + CO; C + 2H/sub 2/O = 2H/sub 2/ + CO/sub 2/; CO + H/sub 2/O = H/sub 2/ + CO/sub 2/ taking off the ash residue of the burned coke and taking off the gaseous products of the reactions.

Mansfield, V.; Francoeur, C.M.

1988-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Sectoral combustor for burning low-BTU fuel gas  

DOE Patents [OSTI]

A high-temperature combustor for burning low-BTU coal gas in a gas turbine is disclosed. The combustor includes several separately removable combustion chambers each having an annular sectoral cross section and a double-walled construction permitting separation of stresses due to pressure forces and stresses due to thermal effects. Arrangements are described for air-cooling each combustion chamber using countercurrent convective cooling flow between an outer shell wall and an inner liner wall and using film cooling flow through liner panel grooves and along the inner liner wall surface, and for admitting all coolant flow to the gas path within the inner liner wall. Also described are systems for supplying coal gas, combustion air, and dilution air to the combustion zone, and a liquid fuel nozzle for use during low-load operation. The disclosed combustor is fully air-cooled, requires no transition section to interface with a turbine nozzle, and is operable at firing temperatures of up to 3000.degree. F. or within approximately 300.degree. F. of the adiabatic stoichiometric limit of the coal gas used as fuel.

Vogt, Robert L. (Schenectady, NY)

1980-01-01T23:59:59.000Z

22

Recent regulatory experience of low-Btu coal gasification. Volume III. Supporting case studies  

SciTech Connect (OSTI)

The MITRE Corporation conducted a five-month study for the Office of Resource Applications in the Department of Energy on the regulatory requirements of low-Btu coal gasification. During this study, MITRE interviewed representatives of five current low-Btu coal gasification projects and regulatory agencies in five states. From these interviews, MITRE has sought the experience of current low-Btu coal gasification users in order to recommend actions to improve the regulatory process. This report is the third of three volumes. It contains the results of interviews conducted for each of the case studies. Volume 1 of the report contains the analysis of the case studies and recommendations to potential industrial users of low-Btu coal gasification. Volume 2 contains recommendations to regulatory agencies.

Ackerman, E.; Hart, D.; Lethi, M.; Park, W.; Rifkin, S.

1980-02-01T23:59:59.000Z

23

Vol. 30 ISMB 2014, pages i9i18 BIOINFORMATICS doi:10.1093/bioinformatics/btu259  

E-Print Network [OSTI]

Vol. 30 ISMB 2014, pages i9­i18 BIOINFORMATICS doi:10.1093/bioinformatics/btu259 Evaluating synteny

Moret, Bernard

24

COMPCOAL{trademark}: A profitable process for production of a stable high-Btu fuel from Powder River Basin coal  

SciTech Connect (OSTI)

Western Research Institute (WRI) is developing a process to produce a stable, clean-burning, premium fuel from Powder River Basin (PRB) coal and other low-rank coals. This process is designed to overcome the problems of spontaneous combustion, dust formation, and readsorption of moisture that are experienced with PRB coal and with processed PRB coal. This process, called COMPCOAL{trademark}, results in high-Btu product that is intended for burning in boilers designed for midwestern coals or for blending with other coals. In the COMPCOAL process, sized coal is dried to zero moisture content and additional oxygen is removed from the coal by partial decarboxylation as the coal is contacted by a stream of hot fluidizing gas in the dryer. The hot, dried coal particles flow into the pyrolyzer where they are contacted by a very small flow of air. The oxygen in the air reacts with active sites on the surface of the coal particles causing the temperature of the coal to be raised to about 700{degrees}F (371{degrees}C) and oxidizing the most reactive sites on the particles. This ``instant aging`` contributes to the stability of the product while only reducing the heating value of the product by about 50 Btu/lb. Less than 1 scf of air per pound of dried coal is used to avoid removing any of the condensible liquid or vapors from the coal particles. The pyrolyzed coal particles are mixed with fines from the dryer cyclone and dust filter and the resulting mixture at about 600{degrees}F (316{degrees}C) is fed into a briquettor. Briquettes are cooled to about 250{degrees}F (121{degrees}C) by contact with a mist of water in a gas-tight mixing conveyor. The cooled briquettes are transferred to a storage bin where they are accumulated for shipment.

Smith, V.E.; Merriam, N.W.

1994-10-01T23:59:59.000Z

25

Stabilization  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBiSiteNeutron Scattering4 By I. Tudosa,SpreadingStability of and

26

An analytical investigation of primary zone combustion temperatures and NOx production for turbulent jet flames using low-BTU fuels  

E-Print Network [OSTI]

The objective of this research project was to identify and determine the effect of jet burner operating variables that influence combustion of low-BTU gases. This was done by simulating the combustion of a low-BTU fuel in a jet flame and predicting...

Carney, Christopher Mark

1995-01-01T23:59:59.000Z

27

Functional Stability of a Mixed Microbial Consortium Producing PHA From Waste Carbon Sources  

SciTech Connect (OSTI)

Polyhydroxyalkanoates (PHAs) represent an environmentally-effective alternative to synthetic thermoplastics; however, current production practices are not sustainable. In this study, PHA production was accomplished in sequencing batch bioreactors utilizing real wastewaters and mixed microbial consortia from municipal activated sludge as inoculum. Polymer production reached 85%, 53%, and 10% of the cell dry weight from methanol-enriched pulp-and-paper mill foul condensate, fermented municipal primary solids, and biodiesel wastewater, respectively. Employing denaturing gradient gel electrophoresis of 16S-rDNA from PCR-amplified DNA extracts, distinctly different communities were observed between and within wastewaters following enrichment. Most importantly, functional stability was maintained despite differing and contrasting microbial populations.

David N. Thompson; Erik R. Coats; William A. Smith; Frank J. Loge; Michael P. Wolcott

2006-04-01T23:59:59.000Z

28

Understanding Utility Rates or How to Operate at the Lowest $/BTU  

E-Print Network [OSTI]

. The lower the energy rating (KW/Ton or KW/HP or KW/BTU) the more efficient the equipment and the less demand draw on the electric power plants, thereby reducing the need to build new power plants. To encourage DSM, utilities give rebates for high...: Bob Allwein, Oklahoma Natural Gas Company. Dick Landry, Gulf States Utility. Curtis Williford, Entex Gas Company. Bret McCants, Central Power and Light Company. Frank Tanner, Southern Union. Patric Coon, West Texas utilities. ESL-IE-93...

Phillips, J. N.

29

Functional Stability Of A Mixed Microbial Consortia Producing PHA From Waste Carbon Sources  

SciTech Connect (OSTI)

Polyhydroxyalkanoates (PHAs), naturally-occurring biological polyesters that are microbially synthesized from a myriad of carbon sources, can be utilized as biodegradable substitutes for petroleum-derived thermoplastics. However, current PHA commercialization schemes are limited by high feedstock costs, the requirement for aseptic reactors, and high separation and purification costs. Bacteria indigenous to municipal waste streams can accumulate large quantities of PHA under environmentally controlled conditions; hence, a potentially more environmentally-effective method of production would utilize these consortia to produce PHAs from inexpensive waste carbon sources. In this study, PHA production was accomplished in sequencing batch bioreactors utilizing mixed microbial consortia from municipal activated sludge as inoculum, in cultures grown on real wastewaters. PHA production averaged 85%, 53%, and 10% of the cell dry weight from methanol-enriched pulp-and-paper mill foul condensate, fermented municipal primary solids, and biodiesel wastewater, respectively. The PHA-producing microbial consortia were examined to explore the microbial community changes that occurred during reactor operations, employing denaturing gradient gel electrophoresis (DGGE) of 16S-rDNA from PCR-amplified DNA extracts. Distinctly different communities were observed both between and within wastewaters following enrichment. More importantly, stable functions were maintained despite the differing and contrasting microbial populations.

David N. Thompson; Erik R. Coats; William A. Smith; Frank J. Loge; Michael P. Wolcott

2006-04-01T23:59:59.000Z

30

High btu gas from peat. A feasibility study. Part 1. Executive summary. Final report  

SciTech Connect (OSTI)

In September, 1980, the US Department of Energy (DOE) awarded a Grant (No. DE-FG01-80RA50348) to the Minnesota Gas Company (Minnegasco) to evaluate the commercial viability - technical, economic and environmental - of producing 80 million standard cubic feet per day (SCFD) of substitute natural gas (SNG) from peat. The proposed product, high Btu SNG would be a suitable substitute for natural gas which is widely used throughout the Upper Midwest by residential, commercial and industrial sectors. The study team consisted of Dravo Engineers and Constructors, Ertec Atlantic, Inc., The Institute of Gas Technology, Deloitte, Haskins and Sells and Minnegasco. Preliminary engineering and operating and financial plans for the harvesting, dewatering and gasification operations were developed. A site in Koochiching County near Margie was chosen for detailed design purposes only; it was not selected as a site for development. Environmental data and socioeconomic data were gathered and reconciled. Potential economic data were gathered and reconciled. Potential impacts - both positive and negative - were identified and assessed. The peat resource itself was evaluated both qualitatively and quantitatively. Markets for plant by-products were also assessed. In summary, the technical, economic, and environmental assessment indicates that a facility producing 80 billion Btu's per day SNG from peat is not commercially viable at this time. Minnegasco will continue its efforts into the development of peat and continue to examine other options.

Not Available

1984-01-01T23:59:59.000Z

31

Markets for low- and medium-Btu coal gasification: an analysis of 13 site specific studies  

SciTech Connect (OSTI)

In 1978 the US Department of Energy (DOE), through its Office of Resource Applications, developed a commercialization plan for low- and medium-Btu coal gasification. Several initial steps have been taken in that process, including a comprehensive study of industrial markets, issuance of a Notice of Program Interest, and funding of proposals under the Alternate Fuels Legislation (P.L. 96-126). To assist it in the further development and administration of the commercialization plan, the Office of Resource Applications has asked Booz, Allen and Hamilton to assess the market prospects for low- and medium-Btu coal gasification. This report covers the detailed findings of the study. Following the introduction which discusses the purpose of the study, approach used for the assignment and current market attitudes on coal gasification, there are three chapters on: systems configurations and applications; economic and finanical attractiveness; and summary of management decisions based on feasibility study results. The final chapter briefly assesses the management decisions. The general consensus seems to be that coal gasification is a technology that will be attractive in the future but is marginal now. 6 figures, 5 tables.

Not Available

1981-09-01T23:59:59.000Z

32

Evaluating Mercury Concentrations in Midwest Fish in Relationship to Mercury Emission Sources  

E-Print Network [OSTI]

International Energy Outlook estimates that world usage of coal will grow from 132 quadrillion British Thermal Units (BTU) in 2008 to over 202 quadrillion BTU in 2030 (USDOE, 2008). Even with improved mercury controls on power plants, this increase..., it is worthwhile to further examine the relationships between local sources of mercury and elevated concentrations of mercury in fish since these relationships may better inform control strategies, siting concerns, and overall energy policies. The author...

Robichaud, Jeffery

2008-12-19T23:59:59.000Z

33

SOURCE?  

Energy Savers [EERE]

Department of Energy (DOE) in partnership with Lawrence Berkeley National Laboratory (LBNL), is an open-source code package designed to be a common, low-cost, standardized tool...

34

Commercial demonstration of atmospheric medium BTU fuel gas production from biomass without oxygen the Burlington, Vermont Project  

SciTech Connect (OSTI)

The first U.S. demonstration of a gas turbine operating on fuel gas produced by the thermal gasification of biomass occurred at Battelle Columbus Labs (BCL) during 1994 using their high throughput indirect medium Btu gasification Process Research Unit (PRU). Zurn/NEPCO was retained to build a commercial scale gas plant utilizing this technology. This plant will have a throughput rating of 8 to 12 dry tons per hour. During a subsequent phase of the Burlington project, this fuel gas will be utilized in a commercial scale gas turbine. It is felt that this process holds unique promise for economically converting a wide variety of biomass feedstocks efficiently into both a medium Btu (500 Btu/scf) gas turbine and IC engine quality fuel gas that can be burned in engines without modification, derating or efficiency loss. Others are currently demonstrating sub-commercial scale thermal biomass gasification processes for turbine gas, utilizing both atmospheric and pressurized air and oxygen-blown fluid bed processes. While some of these approaches hold merit for coal, there is significant question as to whether they will prove economically viable in biomass facilities which are typically scale limited by fuel availability and transportation logistics below 60 MW. Atmospheric air-blown technologies suffer from large sensible heat loss, high gas volume and cleaning cost, huge gas compressor power consumption and engine deratings. Pressurized units and/or oxygen-blown gas plants are extremely expensive for plant scales below 250 MW. The FERCO/BCL process shows great promise for overcoming the above limitations by utilizing an extremely high throughout circulation fluid bed (CFB) gasifier, in which biomass is fully devolitalized with hot sand from a CFB char combustor. The fuel gas can be cooled and cleaned by a conventional scrubbing system. Fuel gas compressor power consumption is reduced 3 to 4 fold verses low Btu biomass gas.

Rohrer, J.W. [Zurn/NEPCO, South Portland, MA (United States); Paisley, M. [Battelle Laboratories, Columbus, OH (United States)

1995-12-31T23:59:59.000Z

35

High-temperature turbine technology program. Turbine subsystem design report: Low-Btu gas  

SciTech Connect (OSTI)

The objective of the US Department of Energy High-Temperature Turbine Technology (DOE-HTTT) program is to bring to technology readiness a high-temperature (2600/sup 0/F to 3000/sup 0/F firing temperature) turbine within a 6- to 10-year duration, Phase II has addressed the performance of component design and technology testing in critical areas to confirm the design concepts identified in the earlier Phase I program. Based on the testing and support studies completed under Phase II, this report describes the updated turbine subsystem design for a coal-derived gas fuel (low-Btu gas) operation at 2600/sup 0/F turbine firing temperature. A commercial IGCC plant configuration would contain four gas turbines. These gas turbines utilize an existing axial flow compressor from the GE product line MS6001 machine. A complete description of the Primary Reference Design-Overall Plant Design Description has been developed and has been documented. Trends in overall plant performance improvement at higher pressure ratio and higher firing temperature are shown. It should be noted that the effect of pressure ratio on efficiency is significally enhanced at higher firing temperatures. It is shown that any improvement in overall plant thermal efficiency reflects about the same level of gain in Cost of Electricity (COE). The IGCC concepts are shown to be competitive in both performance and cost at current and near-term gas turbine firing temperatures of 1985/sup 0/F to 2100/sup 0/F. The savings that can be accumulated over a thirty-year plant life for a water-cooled gas turbine in an IGCC plant as compared to a state-of-the-art coal-fired steam plant are estimated. A total of $500 million over the life of a 1000 MW plant is projected. Also, this IGCC power plant has significant environmental advantages over equivalent coal-fired steam power plants.

Horner, M.W.

1980-12-01T23:59:59.000Z

36

High Btu gas from peat. A feasibility study. Part 2. Management plans for project continuation. Task 10. Final report  

SciTech Connect (OSTI)

The primary objective of this task, which was the responsibility of the Minnesota Gas Company, was to determine the needs of the project upon completion of the feasibility study and determine how to implement them most effectively. The findings of the study do not justify the construction of an 80 billion Btu/day SNG from peat plant. At the present time Minnegasco will concentrate on other issues of peat development. Other processes, other products, different scales of operation - these are the issues that Minnegasco will continue to study. 3 references.

Not Available

1982-01-01T23:59:59.000Z

37

Production of Medium BTU Gas by In Situ Gasification of Texas Lignite  

E-Print Network [OSTI]

The necessity of providing clean, combustible fuels for use in Gulf Coast industries is well established; one possible source of such a fuel is to perform in situ gasification of Texas lignite which lies below stripping depths. If oxygen (rather...

Edgar, T. F.

1979-01-01T23:59:59.000Z

38

,"Henry Hub Natural Gas Spot Price (Dollars per Million Btu)"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy SourcesWyoming"CoalbedOhio"Associated-Dissolved Natural Gas,

39

,"Henry Hub Natural Gas Spot Price (Dollars per Million Btu)"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy SourcesWyoming"CoalbedOhio"Associated-Dissolved Natural

40

System and process for the abatement of casting pollution, reclaiming resin bonded sand, and/or recovering a low BTU fuel from castings  

DOE Patents [OSTI]

Air is caused to flow through the resin bonded mold to aid combustion of the resin binder to form a low BTU gas fuel. Casting heat is recovered for use in a waste heat boiler or other heat abstraction equipment. Foundry air pollution is reduced, the burned portion of the molding sand is recovered for immediate reuse and savings in fuel and other energy is achieved.

Scheffer, Karl D. (121 Governor Dr., Scotia, NY 12302)

1984-07-03T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

System and process for the abatement of casting pollution, reclaiming resin bonded sand, and/or recovering a low Btu fuel from castings  

DOE Patents [OSTI]

Air is caused to flow through the resin bonded mold to aid combustion of the resin binder to form a low Btu gas fuel. Casting heat is recovered for use in a waste heat boiler or other heat abstraction equipment. Foundry air pollutis reduced, the burned portion of the molding sand is recovered for immediate reuse and savings in fuel and other energy is achieved. 5 figs.

Scheffer, K.D.

1984-07-03T23:59:59.000Z

42

"Primary Energy Source","Natural Gas"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Physical Units or Btu.242.6

43

"Primary Energy Source","Natural Gas"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Physical Units or Btu.242.6California"

44

Commercial low-Btu coal-gasification plant. Feasibility study: General Refractories Company, Florence, Kentucky. Volume I. Project summary. [Wellman-Galusha  

SciTech Connect (OSTI)

In response to a 1980 Department of Energy solicitation, the General Refractories Company submitted a Proposal for a feasibility study of a low Btu gasification facility for its Florence, KY plant. The proposed facility would substitute low Btu gas from a fixed bed gasifier for natural gas now used in the manufacture of insulation board. The Proposal from General Refractories was prompted by a concern over the rising costs of natural gas, and the anticipation of a severe increase in fuel costs resulting from deregulation. The proposed feasibility study is defined. The intent is to provide General Refractories with the basis upon which to determine the feasibility of incorporating such a facility in Florence. To perform the work, a Grant for which was awarded by the DOE, General Refractories selected Dravo Engineers and Contractors based upon their qualifications in the field of coal conversion, and the fact that Dravo has acquired the rights to the Wellman-Galusha technology. The LBG prices for the five-gasifier case are encouraging. Given the various natural gas forecasts available, there seems to be a reasonable possibility that the five-gasifier LBG prices will break even with natural gas prices somewhere between 1984 and 1989. General Refractories recognizes that there are many uncertainties in developing these natural gas forecasts, and if the present natural gas decontrol plan is not fully implemented some financial risks occur in undertaking the proposed gasification facility. Because of this, General Refractories has decided to wait for more substantiating evidence that natural gas prices will rise as is now being predicted.

none,

1981-11-01T23:59:59.000Z

45

Tetraphenylborate Solids Stability Tests  

SciTech Connect (OSTI)

Tetraphenylborate solids provide a potentially large source of benzene in the slurries produced in the In-Tank Precipitation process. The stability of the solids is an important consideration in the safety analysis of the process and we desire an understanding of the factors that influence the rate of conversion of the solids to benzene.

Walker, D.D. [Westinghouse Savannah River Company, AIKEN, SC (United States); Edwards, T.B.

1997-12-19T23:59:59.000Z

46

7-55E An office that is being cooled adequately by a 12,000 Btu/h window air-conditioner is converted to a computer room. The number of additional air-conditioners that need to be installed is to be determined.  

E-Print Network [OSTI]

7-20 7-55E An office that is being cooled adequately by a 12,000 Btu/h window air-conditioner is converted to a computer room. The number of additional air-conditioners that need to be installed/h. Then noting that each available air conditioner provides 4,000 Btu/h cooling, the number of air- conditioners

Bahrami, Majid

47

First BTU | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublicIDAPowerPlantSitingConstruction.pdfNotify98.pdf Jump to:Siting.pdf JumpFirelands Electric Coop,

48

Stability of Molten Core Materials  

SciTech Connect (OSTI)

The purpose of this report is to document a literature and data search for data and information pertaining to the stability of nuclear reactor molten core materials. This includes data and analysis from TMI-2 fuel and INLís LOFT (Loss of Fluid Test) reactor project and other sources.

Layne Pincock; Wendell Hintze

2013-01-01T23:59:59.000Z

49

Spin Stability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systemsBiSiteNeutron Scattering4 By I. Tudosa, H. C. SiegmannSpin Stability

50

"Primary Energy Source","Natural Gas"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Physical Units or Btu.242.6California"Delaware"

51

"Primary Energy Source","Natural Gas"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Physical Units or Btu.242.6California"Delaware"District

52

Orbit Stability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 The 2002Optics Group (X-ray ScienceMicroflows. |Source Parameter

53

Material Stabilization Project Management Plan  

SciTech Connect (OSTI)

This plan presents the overall objectives, description, justification and planning for the plutonium Finishing Plant (PFP) Materials Stabilization project. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Plutonium Finishing Plant Integrated Project Management Plan (IPMP), HNF-3617, Rev. 0. This is the top-level definitive project management document that specifies the technical (work scope), schedule, and cost baselines to manager the execution of this project. It describes the organizational approach and roles/responsibilities to be implemented to execute the project. This plan is under configuration management and any deviations must be authorized by appropriate change control action. Materials stabilization is designated the responsibility to open and stabilize containers of plutonium metal, oxides, alloys, compounds, and sources. Each of these items is at least 30 weight percent plutonium/uranium. The output of this project will be containers of materials in a safe and stable form suitable for storage pending final packaging and/or transportation offsite. The corrosion products along with oxides and compounds will be stabilized via muffle furnaces to reduce the materials to high fired oxides.

SPEER, D.R.

1999-09-01T23:59:59.000Z

54

Fiber optically isolated and remotely stabilized data transmission system  

DOE Patents [OSTI]

A fiber optically isolated and remotely stabilized data transmission systems described wherein optical data may be transmitted over an optical data fiber from a remote source which includes a data transmitter and a power supply at the remote source. The transmitter may be remotely calibrated and stabilized via an optical control fiber, and the power source may be remotely cycled between duty and standby modes via an optical control fiber. 3 figs.

Nelson, M.A.

1992-11-10T23:59:59.000Z

55

Analysis of Energy Use in Building Services of the Industrial Sector in California: A Literature Review and a Preliminary Characterization  

E-Print Network [OSTI]

by ERC, is 448.3 trillion Btu (TBtu). The total CaliforniaBecause the cost of an electrical Btu is roughly 4 timesthat of a source fuel Btu, industrial categories that use

Akbari, H.

2008-01-01T23:59:59.000Z

56

RCRA facility stabilization initiative  

SciTech Connect (OSTI)

The RCRA Facility Stabilization Initiative was developed as a means of implementing the Corrective Action Program`s management goals recommended by the RIS for stabilizing actual or imminent releases from solid waste management units that threaten human health and the environment. The overall goal of stabilization is to, as situations warrant, control or abate threats to human health and/or the environment from releases at RCRA facilities, and/or to prevent or minimize the further spread of contamination while long-term remedies are pursued. The Stabilization initiative is a management philosophy and should not be confused with stabilization technologies.

Not Available

1995-02-01T23:59:59.000Z

57

Stabilized radio frequency quadrupole  

DOE Patents [OSTI]

Disclosed is a long-vane stabilized radio frequency resonator for accelerating charged particles and including means defining a radio frequency resonator cavity, a plurality of long vanes mounted in the defining means for dividing the cavity into sections, and means interconnecting opposing ones of the plurality of vanes for stabilizing the resonator. 5 figs.

Lancaster, H.D.; Fugitt, J.A.; Howard, D.R.

1984-12-25T23:59:59.000Z

58

Homological stabilizer codes  

SciTech Connect (OSTI)

In this paper we define homological stabilizer codes on qubits which encompass codes such as Kitaev's toric code and the topological color codes. These codes are defined solely by the graphs they reside on. This feature allows us to use properties of topological graph theory to determine the graphs which are suitable as homological stabilizer codes. We then show that all toric codes are equivalent to homological stabilizer codes on 4-valent graphs. We show that the topological color codes and toric codes correspond to two distinct classes of graphs. We define the notion of label set equivalencies and show that under a small set of constraints the only homological stabilizer codes without local logical operators are equivalent to Kitaev's toric code or to the topological color codes. - Highlights: Black-Right-Pointing-Pointer We show that Kitaev's toric codes are equivalent to homological stabilizer codes on 4-valent graphs. Black-Right-Pointing-Pointer We show that toric codes and color codes correspond to homological stabilizer codes on distinct graphs. Black-Right-Pointing-Pointer We find and classify all 2D homological stabilizer codes. Black-Right-Pointing-Pointer We find optimal codes among the homological stabilizer codes.

Anderson, Jonas T., E-mail: jonastyleranderson@gmail.com

2013-03-15T23:59:59.000Z

59

Experimental program for the development of peat gasification. Process designs and cost estimates for the manufacture of 250 billion Btu/day SNG from peat by the PEATGAS Process. Interim report No. 8  

SciTech Connect (OSTI)

This report presents process designs for the manufacture of 250 billion Btu's per day of SNG by the PEATGAS Process from peats. The purpose is to provide a preliminary assessment of the process requirements and economics of converting peat to SNG by the PEATGAS Process and to provide information needed for the Department of Energy (DOE) to plan the scope of future peat gasification studies. In the process design now being presented, peat is dried to 35% moisture before feeding to the PEATGAS reactor. This is the basic difference between the Minnesota peat case discussed in the current report and that presented in the Interim Report No. 5. The current design has overall economic advantages over the previous design. In the PEATGAS Process, peat is gasified at 500 psig in a two-stage reactor consisting of an entrained-flow hydrogasifier followed by a fluidized-bed char gasifier using steam and oxygen. The gasifier operating conditions and performance are necessarily based on the gasification kinetic model developed for the PEATGAS reactor using the laboratory- and PDU-scale data as of March 1978 and April 1979, respectively. On the basis of the available data, this study concludes that, although peat is a low-bulk density and low heating value material requiring large solids handling costs, the conversion of peat to SNG appears competitive with other alternatives being considered for producing SNG because of its very favorable gasification characteristics (high methane formation tendency and high reactivity). As a direct result of the encouraging technical and economic results, DOE is planning to modify the HYGAS facility in order to begin a peat gasification pilot plant project.

Arora, J.L.; Tsaros, C.L.

1980-02-01T23:59:59.000Z

60

New source performance standards for industrial boilers. Volume 2. Review of industry operating practices  

SciTech Connect (OSTI)

The applicability is evaluated of several possible versions of a revised New Source Performance Standards (NSPS) for industrial boilers to boilers that are operated according to typical industry practices. A survey of operating practices is presented, and it is concluded that an NSPS that includes too high a percent removal requirement for SO/sub 2/ (90%) might be excessively costly and cause operating problems for the industrial operator. More field evaluations of low excess air and low Btu gasification are required to validate these techniques for pollution control under industrial boiler operating conditions. The cost of two small boilers with no SO/sub 2/ controls was less than one large boiler of twice the capacity with SO/sub 2/ controls. The annual cost of operating and maintaining the control system accounted for the difference.

Bryan, R.J.; Weisenberg, I.J.; Wilson, K.

1980-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Ideal Stabilization Mikhail Nesterenko  

E-Print Network [OSTI]

StabilizationLegitimate #12;Questions · Existence ? · Construction ? · Composition ? · Implementation vs Mappings Program #12;Leader Election L L L L L L L L #12;Leader Election L L #12;Leader Election L L #12

Nesterenko, Mikhail

62

Thermal Stabilization Blend Plan  

SciTech Connect (OSTI)

This Blend Plan documents the feed material items that are stored in 2736-2 vaults, the 2736-ZB 638 cage, the 192C vault, and the 225 vault that will be processed through the thermal stabilization furnaces. The purpose of thermal stabilization is to heat the material to 1000 degrees Celsius to drive off all water and leave the plutonium and/or uranium as oxides. The stabilized material will be sampled to determine the Loss On Ignition (LOI) or percent water. The stabilized material must meet water content or LOI of less than 0.5% to be acceptable for storage under DOE-STD-3013-99 specifications. Out of specification material will be recycled through the furnaces until the water or LOI limits are met.

RISENMAY, H.R.

2000-05-02T23:59:59.000Z

63

Production of low BTU gas from biomass  

E-Print Network [OSTI]

J. To utilize this untapped resource, several tech- nologies were proposed. Among them were pyrolysis, gasification and combustion. As the study group ' s objective was focused on actual farm usage, pyrolysis This thesis follows the style and format... for combustion is simple relative to the gasification or pyrolysis and construc- tion and operation of the necessary equipment should also be easier. However, the final product of com- bustion, steam energy, cannot be stored for long periods of time...

Lee, Yung N.

1981-01-01T23:59:59.000Z

64

Catalytic reactor for low-Btu fuels  

DOE Patents [OSTI]

An improved catalytic reactor includes a housing having a plate positioned therein defining a first zone and a second zone, and a plurality of conduits fabricated from a heat conducting material and adapted for conducting a fluid therethrough. The conduits are positioned within the housing such that the conduit exterior surfaces and the housing interior surface within the second zone define a first flow path while the conduit interior surfaces define a second flow path through the second zone and not in fluid communication with the first flow path. The conduit exits define a second flow path exit, the conduit exits and the first flow path exit being proximately located and interspersed. The conduits define at least one expanded section that contacts adjacent conduits thereby spacing the conduits within the second zone and forming first flow path exit flow orifices having an aggregate exit area greater than a defined percent of the housing exit plane area. Lastly, at least a portion of the first flow path defines a catalytically active surface.

Smith, Lance (North Haven, CT); Etemad, Shahrokh (Trumbull, CT); Karim, Hasan (Simpsonville, SC); Pfefferle, William C. (Madison, CT)

2009-04-21T23:59:59.000Z

65

BTU International Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 EastMaine: EnergyAustin Energy Place:Guidance DocumentsOperationsBSST LLC JumpBTMBTU

66

Stabilization of compactible waste  

SciTech Connect (OSTI)

This report summarizes the results of series of experiments performed to determine the feasibility of stabilizing compacted or compactible waste with polymers. The need for this work arose from problems encountered at disposal sites attributed to the instability of this waste in disposal. These studies are part of an experimental program conducted at Brookhaven National Laboratory (BNL) investigating methods for the improved solidification/stabilization of DOE low-level wastes. The approach taken in this study was to perform a series of survey type experiments using various polymerization systems to find the most economical and practical method for further in-depth studies. Compactible dry bulk waste was stabilized with two different monomer systems: styrene-trimethylolpropane trimethacrylate (TMPTMA) and polyester-styrene, in laboratory-scale experiments. Stabilization was accomplished by wetting or soaking compactible waste (before or after compaction) with monomers, which were subsequently polymerized. Three stabilization methods are described. One involves the in-situ treatment of compacted waste with monomers in which a vacuum technique is used to introduce the binder into the waste. The second method involves the alternate placement and compaction of waste and binder into a disposal container. In the third method, the waste is treated before compaction by wetting the waste with the binder using a spraying technique. A series of samples stabilized at various binder-to-waste ratios were evaluated through water immersion and compression testing. Full-scale studies were conducted by stabilizing two 55-gallon drums of real compacted waste. The results of this preliminary study indicate that the integrity of compacted waste forms can be readily improved to ensure their long-term durability in disposal environments. 9 refs., 10 figs., 2 tabs.

Franz, E.M.; Heiser, J.H. III; Colombo, P.

1990-09-01T23:59:59.000Z

67

Stabilized PV system  

DOE Patents [OSTI]

A stabilized PV system comprises an array of photovoltaic (PV) assemblies mounted to a support surface. Each PV assembly comprises a PV module and a support assembly securing the PV module to a position overlying the support surface. The array of modules is circumscribed by a continuous, belt-like perimeter assembly. Cross strapping, extending above, below or through the array, or some combination of above, below and through the array, secures a first position along the perimeter assembly to at least a second position along the perimeter assembly thereby stabilizing the array against wind uplift forces. The first and second positions may be on opposite sides on the array.

Dinwoodie, Thomas L. (Piedmont, CA)

2002-12-17T23:59:59.000Z

68

Stability of the aether  

E-Print Network [OSTI]

The requirements for stability of a Lorentz violating theory are analyzed. In particular we conclude that Einstein-aether theory can be stable when its modes have any phase velocity, rather than only the speed of light as was argued in a recent paper.

William Donnelly; Ted Jacobson

2012-01-16T23:59:59.000Z

69

Stability of the aether  

SciTech Connect (OSTI)

The requirements for stability of a Lorentz violating theory are analyzed. In particular we conclude that Einstein-aether theory can be stable when its modes have any phase velocity, rather than only the speed of light as was argued in a recent paper.

Donnelly, William; Jacobson, Ted [Center for Fundamental Physics, Department of Physics, University of Maryland at College Park, College Park, Maryland, 20742-4111 (United States)

2010-10-15T23:59:59.000Z

70

Stabilized chromium oxide film  

DOE Patents [OSTI]

Stabilized air-oxidized chromium films deposited on high-power klystron ceramic windows and sleeves having a thickness between 20 and 150A are useful in lowering secondary electron emission yield and in avoiding multipactoring and window failure due to overheating. The ceramic substrate for the film is chosen from alumina, sapphire or beryllium oxide.

Nyaiesh, A.R.; Garwin, E.L.

1986-08-04T23:59:59.000Z

71

Stabilized chromium oxide film  

DOE Patents [OSTI]

Stabilized air-oxidized chromium films deposited on high-power klystron ceramic windows and sleeves having a thickness between 20 and 150.ANG. are useful in lowering secondary electron emission yield and in avoiding multipactoring and window failure due to overheating. The ceramic substrate for the film is chosen from alumina, sapphire or beryllium oxide.

Garwin, Edward L. (Los Altos, CA); Nyaiesh, Ali R. (Palo Alto, CA)

1988-01-01T23:59:59.000Z

72

Orbit Stabilization of Nanosat  

SciTech Connect (OSTI)

An algorithm is developed to control a pulsed {Delta}V thruster on a small satellite to allow it to fly in formation with a host satellite undergoing time dependent atmospheric drag deceleration. The algorithm uses four short thrusts per orbit to correct for differences in the average radii of the satellites due to differences in drag and one thrust to symmetrize the orbits. The radial difference between the orbits is the only input to the algorithm. The algorithm automatically stabilizes the orbits after ejection and includes provisions to allow azimuthal positional changes by modifying the drag compensation pulses. The algorithm gives radial and azimuthal deadbands of 50 cm and 3 m for a radial measurement accuracy of {+-} 5 cm and {+-} 60% period variation in the drag coefficient of the host. Approaches to further reduce the deadbands are described. The methodology of establishing a stable orbit after ejection is illustrated in an appendix. The results show the optimum ejection angle to minimize stabilization thrust is upward at 86{sup o} from the orbital velocity. At this angle the stabilization velocity that must be supplied by the thruster is half the ejection velocity. An ejection velocity of 0.02 m/sat 86{sup o} gives an azimuthal separation after ejection and orbit stabilization of 187 m. A description of liquid based gas thrusters suitable for the satellite control is included in an appendix.

JOHNSON,DAVID J.

1999-12-01T23:59:59.000Z

73

Stability and Complexity in  

E-Print Network [OSTI]

and complexity of a commu- nity of interacting plants and animals, following the food web as a clue. Contrary in power. Stability and Complexity in Model Ecosystems played a key role in introducing nonlinear thinking, and current threats to biodiversity have made questions about the role of ecosystem complexity

Landweber, Laura

74

Stability of Coupling Algorithms  

E-Print Network [OSTI]

INTRODUCTION AND MOTIVATION : : : : : : : : : : : : : 1 A. Approaches to solving a coupled system . . . . . . . . . . . 3 B. Common terminology . . . . . . . . . . . . . . . . . . . . . 5 C. Classi cation of coupling algorithms . . . . . . . . . . . . . 7 1... equal, cA = cB = mA = mB = 1 and with dissipation, = 0:5 : : : : : : : : : : : : : : : : 26 10 Conditional stability observed with cA > cB. The material prop- erties: cA = 100; cB = 1; mA = mB = 1; = 1 : : : : : : : : : : : : : 27 11 An unstable...

Akkasale, Abhineeth

2012-07-16T23:59:59.000Z

75

Codeword Stabilized Quantum Codes  

E-Print Network [OSTI]

We present a unifying approach to quantum error correcting code design that encompasses additive (stabilizer) codes, as well as all known examples of nonadditive codes with good parameters. We use this framework to generate new codes with superior parameters to any previously known. In particular, we find ((10,18,3)) and ((10,20,3)) codes. We also show how to construct encoding circuits for all codes within our framework.

Andrew Cross; Graeme Smith; John A. Smolin; Bei Zeng

2007-09-27T23:59:59.000Z

76

Radiation source  

DOE Patents [OSTI]

A device and method for relativistic electron beam heating of a high-density plasma in a small localized region. A relativistic electron beam generator or accelerator produces a high-voltage electron beam which propagates along a vacuum drift tube and is modulated to initiate electron bunching within the beam. The beam is then directed through a low-density gas chamber which provides isolation between the vacuum modulator and the relativistic electron beam target. The relativistic beam is then applied to a high-density target plasma which typically comprises DT, DD, or similar thermonuclear gas at a density of 10.sup.17 to 10.sup.20 electrons per cubic centimeter. The target gas is ionized prior to application of the relativistic electron beam by means of a laser or other preionization source to form a plasma. Utilizing a relativistic electron beam with an individual particle energy exceeding 3 MeV, classical scattering by relativistic electrons passing through isolation foils is negligible. As a result, relativistic streaming instabilities are initiated within the high-density target plasma causing the relativistic electron beam to efficiently deposit its energy into a small localized region of the high-density plasma target.

Thode, Lester E. (Los Alamos, NM)

1981-01-01T23:59:59.000Z

77

Structural stability of cooling flows  

E-Print Network [OSTI]

Three-dimensional hydrodynamical simulations are used to investigate the structural stability of cooling flows that are episodically heated by jets from a central AGN. The radial profile of energy deposition is controlled by (a) the power of the jets, and (b) the pre-outburst density profile. A delay in the ignition of the jets causes more powerful jets to impact on a more centrally concentrated medium. The net effect is a sufficient increase in the central concentration of energy deposition to cause the post-outburst density profile to be less centrally concentrated than that of an identical cluster in which the outburst happened earlier and was weaker. These results suggest that the density profiles of cooling flows oscillate around an attracting profile, thus explaining why cooling flows are observed to have similar density profiles. The possibility is raised that powerful FR II systems are ones in which this feedback mechanism has broken down and a runaway growth of the source parameters has occurred.

Henrik Omma; James Binney

2003-12-31T23:59:59.000Z

78

Chassis stabilization system  

DOE Patents [OSTI]

A stabilizing suspension system is provided for vehicles carrying telescopic booms or aerial work platforms having a fixed axle and a oscillating axle. Hydraulic cylinders are connected to each end of the oscillating axle, each cylinder being capable of extending and retracting. An off level sensor senses the angle of tilt of the chassis in both left and right directions and, when a predetermined threshold of tilt has been detected, the hydraulic cylinder on the downhill side of the chassis is locked against retracting, but is free to move in the downhill direction to allow the downhill wheel to remain in contact with the ground.

Claxton, Gerald L. (Fresno, CA)

1999-01-01T23:59:59.000Z

79

Aerodynamic Drag and Gyroscopic Stability  

E-Print Network [OSTI]

This paper describes the effects on aerodynamic drag of rifle bullets as the gyroscopic stability is lowered from 1.3 to 1.0. It is well known that a bullet can tumble for stability less than 1.0. The Sierra Loading Manuals (4th and 5th Editions) have previously reported that ballistic coefficient decreases significantly as gyroscopic stability, Sg, is lowered below 1.3. These observations are further confirmed by experiments reported here. Measured ballistic coefficients were compared with gyroscopic stabilities computed using the Miller Twist Rule for nearly solid metal bullets with uniform density and computed using the Courtney-Miller formula for plastic-tipped bullets. The relationship between Sg and drag may be used to test the applicability of existing gyroscopic stability formulas for given bullet designs and to evaluate the accuracy of alternate formulas in cases where the existing stability formulas are not as accurate. The most definitive test of formulas predicting stability will always be observation of whether bullets tumble under given conditions. However, observations of drag changes provide valuable supplemental information because they suggest changes in stability as conditions change. Use of a continuous variable (drag) rather than a binary variable (tumbling) allows insight into stability over a range of conditions where the binary variable does not change.

Elya R. Courtney; Michael W. Courtney

2014-10-16T23:59:59.000Z

80

Laser controlled flame stabilization  

DOE Patents [OSTI]

A method and apparatus is provided for initiating and stabilizing fuel combustion in applications such as gas turbine electrical power generating engines and jet turbine engines where it is desired to burn lean fuel/air mixtures which produce lower amounts of NO.sub.x. A laser induced spark is propagated at a distance from the fuel nozzle with the laser ignitor being remotely located from the high temperature environment of the combustion chamber. A laser initiating spark generated by focusing high peak power laser light to a sufficiently tight laser spot within the fuel to cause the ionization of air and fuel into a plasma is unobtrusive to the flow dynamics of the combustion chamber of a fuel injector, thereby facilitating whatever advantage can be taken of flow dynamics in the design of the fuel injector.

Early, James W. (Los Alamos, NM); Thomas, Matthew E. (Huntsville, AL)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

IMPROVED ROOF STABILIZATION TECHNOLOGIES  

SciTech Connect (OSTI)

Many U.S. Department of Energy (DOE) remediation sites have performed roof repair and roof replacement to stabilize facilities prior to performing deactivation and decommissioning (D&D) activities. This project will review the decision criteria used by these DOE sites, along with the type of repair system used for each different roof type. Based on this information, along with that compiled from roofing experts, a decision-making tool will be generated to aid in selecting the proper roof repair systems. Where appropriate, innovative technologies will be reviewed and applied to the decision-making tool to determine their applicability. Based on the results, applied research and development will be conducted to develop a method to repair these existing roofing systems, while providing protection for the D and D worker in a cost-efficient manner.

M.A. Ebadian, Ph.D.

1999-01-01T23:59:59.000Z

82

QUANTITATIVE STABILITY ANALYSIS OF STOCHASTIC ...  

E-Print Network [OSTI]

? is said to be lower semi-continuous (lsc for short) at Įx ? X if and only if ..... It is also known as a distance of probability measures having ?-structure, see [45] ...... In order to compare the previous novel stability result for two-stage models ...... Quantitative stability in stochastic programming: The method of probability metrics†...

2013-07-14T23:59:59.000Z

83

Stabilized radio-frequency quadrupole  

DOE Patents [OSTI]

A long-vane stabilized radio frequency resonator for accelerating charged particles and including means defining a radio frequency resonator cavity, a plurality of long vanes mounted in the defining means for dividing the cavity into sections, and means interconnecting opposing ones of the plurality of vanes for stabilizing the resonator.

Lancaster, H.D.; Fugitt, J.A.; Howard, D.R.

1982-09-29T23:59:59.000Z

84

Solidification/stabilization of organics and inorganics. Engineering bulletin  

SciTech Connect (OSTI)

The engineering bulletin on solidification refers to techniques that encapsulate hazardous waste into a solid material of high structural integrity. Encapsulation involves either fine waste particles (microencapsulation) or a large block or container of wastes (macroencapsulation). Stabilization refers to techniques that treat hazardous waste by converting it into a less soluble, mobile, or toxic form. Solidification/Stabilization processes utilize one or both of these techniques. The bulletin provides information on the technology applicability, the technology limitations, a description of the technology, the types of residuals produced, site requirements, the latest performance data, the status of the technology, and sources of further information.

Not Available

1992-09-01T23:59:59.000Z

85

Project Management Plan Solution Stabilization  

SciTech Connect (OSTI)

This plan presents the overall objectives, description, justification and planning for the Plutonium Finishing Plant (PFP) Solutions Stabilization subproject. The intent of this plan is to describe how this project will be managed and integrated with other facility stabilization and deactivation activities. This plan supplements the overall integrated plan presented in the Integrated Project Management Plan (IPMP) for the Plutonium Finishing Plant Stabilization and Deactivation Project, HNF-3617. This project plan is the top-level definitive project management document for the PFP Solution Stabilization subproject. It specifies the technical, schedule, requirements and the cost baselines to manage the execution of the Solution Stabilization subproject. Any deviations to the document must be authorized through the appropriate change control process.

SATO, P.K.

1999-08-31T23:59:59.000Z

86

Phase stabilities at a glance: Stability diagrams of nickel dipnictides  

SciTech Connect (OSTI)

In the course of the recent advances in chemical structure prediction, a straightforward type of diagram to evaluate phase stabilities is presented based on an expedient example. Crystal structures and energetic stabilities of dipnictides NiPn{sub 2} (Pn = N, P, As, Sb, Bi) are systematically investigated by first principles calculations within the framework of density functional theory using the generalized gradient approximation to treat exchange and correlation. These dipnictides show remarkable polymorphism that is not yet understood systematically and offers room for the discovery of new phases. Relationships between the concerned structures including the marcasite, the pyrite, the arsenopyrite/CoSb{sub 2}, and the NiAs{sub 2} types are highlighted by means of common structural fragments. Electronic stabilities of experimentally known and related AB{sub 2} structure types are presented graphically in so-called stability diagrams. Additionally, competing binary phases are taken into consideration in the diagrams to evaluate the stabilities of the title compounds with respect to decomposition. The main purpose of the stability diagrams is the introduction of an image that enables the estimation of phase stabilities at a single glance. Beyond that, some of the energetically favored structure types can be identified as potential new phases.

Bachhuber, F. [University of Regensburg, Institute of Inorganic Chemistry, Universitštsstr. 31, 93040 Regensburg (Germany) [University of Regensburg, Institute of Inorganic Chemistry, Universitštsstr. 31, 93040 Regensburg (Germany); School of Chemical Sciences, The University of Auckland, Private Bag 92019, Auckland (New Zealand); Rothballer, J.; Weihrich, R., E-mail: richard.weihrich@chemie.uni-r.de [University of Regensburg, Institute of Inorganic Chemistry, Universitštsstr. 31, 93040 Regensburg (Germany); SŲhnel, T. [School of Chemical Sciences, The University of Auckland, Private Bag 92019, Auckland (New Zealand) [School of Chemical Sciences, The University of Auckland, Private Bag 92019, Auckland (New Zealand); Centre for Theoretical Chemistry and Physics, The New Zealand Institute for Advanced Study, Massey University Auckland, Auckland (New Zealand)

2013-12-07T23:59:59.000Z

87

Stabilizer for motor vehicle  

SciTech Connect (OSTI)

This patent describes a stabilizer for a motor vehicle comprising: a rod-shaped torsion section extending in the transverse direction of a motor vehicle; a pair of arm sections continuous with both ends of the torsion section and extending in the longitudinal direction of the motor vehicle; a first member attached to the torsion section or at least one of the arm sections and formed with an axially penetrating cylindrical bore; a columnar second member inserted in the bore of the first member; at least one coil spring disposed between the inner peripheral surface of the bore of the first member and the outer peripheral surface of the second member and wound around the second member, at least one end of the coil spring being a free end; an operating member connected to the free end of the coil spring, at least a part of the operating member being located outside the first member; and drive means coupled to the operating member and adapted to apply a force in a direction such that the diameter of the coil spring is increased or reduced.

Takadera, I.; Kuroda, S.

1986-11-11T23:59:59.000Z

88

Innovative sludge stabilization method  

SciTech Connect (OSTI)

Sludge is generated in many water and wastewater treatment processes, both biological and physical/chemical. Examples include biological sludges from sanitary and industrial wastewater treatment operations and chemical sludges such as those produced when metals are removed from metal plating wastewater. Even some potable water plants produce sludge, such as when alum is used as a flocculating agent to clarify turbid water. Because sludge is produced from such a variety of operations, different techniques have been developed to remove water from sludges and reduce the sludge volume and mass, thus making the sludge more suitable for recovery or disposal. These techniques include mechanical (e.g., filter presses), solar (sludge drying beds), and thermal. The least expensive of these methods, neglecting land costs, involves sludge drying beds and lagoons. The solar method was widely used in sewage treatment plants for many years, but has fallen in disfavor in the US; mechanical and thermal methods have been preferred. Since environmental remediation often requires managing sludges, this article presents a discussion of a variation of sludge lagoons known as evaporative sludge stabilization. Application of this process to the closure of two 2.5 acre (10117 m{sup 2}) hazardous waste surface impoundments will be discussed. 1 ref., 2 figs.

Riggenbach, J.D.

1995-06-01T23:59:59.000Z

89

Ferrocyanide tank waste stability  

SciTech Connect (OSTI)

Ferrocyanide wastes were generated at the Hanford Site during the mid to late 1950s as a result of efforts to create more tank space for the storage of high-level nuclear waste. The ferrocyanide process was developed to remove [sup 137]CS from existing waste and newly generated waste that resulted from the recovery of valuable uranium in Hanford Site waste tanks. During the course of research associated with the ferrocyanide process, it was recognized that ferrocyanide materials, when mixed with sodium nitrate and/or sodium nitrite, were capable of violent exothermic reaction. This chemical reactivity became an issue in the 1980s, when safety issues associated with the storage of ferrocyanide wastes in Hanford Site tanks became prominent. These safety issues heightened in the late 1980s and led to the current scrutiny of the safety issues associated with these wastes, as well as current research and waste management programs. Testing to provide information on the nature of possible tank reactions is ongoing. This document supplements the information presented in Summary of Single-Shell Tank Waste Stability, WHC-EP-0347, March 1991 (Borsheim and Kirch 1991), which evaluated several issues. This supplement only considers information particular to ferrocyanide wastes.

Fowler, K.D.

1993-01-01T23:59:59.000Z

90

Electrolytes for power sources  

DOE Patents [OSTI]

Electrolytes are disclosed for power sources, particularly alkaline and acidic power sources, comprising benzene polysulfonic acids and benzene polyphosphonic acids or salts of such acids. 7 figures.

Doddapaneni, N.; Ingersoll, D.

1995-01-03T23:59:59.000Z

91

Protected Water Sources (Iowa)  

Broader source: Energy.gov [DOE]

This chapter designates protected water sources, which are subject to additional special conditions regarding water use. Permit applications for water withdrawals from these sources may still be...

92

Field investigation of keyblock stability  

SciTech Connect (OSTI)

Discontinuities in a rock mass can intersect an excavation surface to form discrete blocks (keyblocks) which can be unstable. This engineering problem is divided into two parts: block identification, and evaluation of block stability. One stable keyblock and thirteen fallen keyblocks were observed in field investigations at the Nevada Test Site. Nine blocks were measured in detail sufficient to allow back-analysis of their stability. Measurements included block geometry, and discontinuity roughness and compressive strength. Back-analysis correctly predicted stability or failure in all but two cases. These two exceptions involved situations that violated the stress assumptions of the stability calculations. Keyblock faces correlated well with known joint set orientations. The effect of tunnel orientation on keyblock frequency was apparent. Back-analysis of physical models successfully predicted block pullout force for two-dimensional models of unit thickness. Two-dimensional (2D) and three-dimensional (3D) analytic models for the stability of simple pyramidal keyblocks were examined. Calculated stability is greater for 3D analyses than for 2D analyses. Calculated keyblock stability increases with larger in situ stress magnitudes, larger lateral stress ratios, and larger shear strengths. Discontinuity stiffness controls block displacement more strongly than it does stability itself. Large keyblocks are less stable than small ones, and stability increases as blocks become more slender. Rock mass temperature decreases reduce the confining stress magnitudes and can lead to failure. The pattern of stresses affecting each block face explains conceptually the occurrence of pyramidal keyblocks that are truncated near their apex.

Yow, J.L. Jr.

1985-04-01T23:59:59.000Z

93

In situ mercury stabilization  

SciTech Connect (OSTI)

BNL Royalty Project Internal Status Report. The funds from the allotment of royalty income were used to experimentally explore feasibility of related, potential new techniques based on the Environmental Sciences Department successful technology licensed for the ex situ treatment of mercury. Specifically, this work is exploring the concept of using Sulfur Polymer Cement (SPC) in an in situ application to stabilize and/or remove mercury (Hg) from surficial soil. Patent disclosure forms have been filed for this process. Soil was artificially spiked with 500 ppm Hg and a series of experiments were set up in which SPC rods were placed in the center of a mass of this soil. Some experiments were conducted at 20 C and others at 50 C. After times ranging from 11 to 24 days, these experiments were opened, photographed and the soil was sampled from discrete locations in the containers. The soil and SPC samples were analyzed for Fe and Hg by x-ray fluorescence. The Hg profile in the soil was significantly altered, with concentrations along the outer edge of the soil reduced by as much as 80% from the starting concentration. Conversely, closer to the treatment rod containing SPC, concentrations of Hg were significantly increased over the original concentration. Preliminary results for elevated temperature sample are shown graphically in Figure 2. Apparently the Hg had migrated toward the SPC and reacted with sulfur to form Hg S. This appears to be a reaction between gaseous phases of both S and Hg, with Hg having a greater vapor pressure. The concentration of low solubility HgS (i.e., low leaching properties) developed within 11 days at 50 C and 21 days at 20 C, confirming the potential of this concept.

Fuhrmann, M.; Kalb, P.; Adams, J.

2004-09-01T23:59:59.000Z

94

Plutonium stabilization and packaging system  

SciTech Connect (OSTI)

This document describes the functional design of the Plutonium Stabilization and Packaging System (Pu SPS). The objective of this system is to stabilize and package plutonium metals and oxides of greater than 50% wt, as well as other selected isotopes, in accordance with the requirements of the DOE standard for safe storage of these materials for 50 years. This system will support completion of stabilization and packaging campaigns of the inventory at a number of affected sites before the year 2002. The package will be standard for all sites and will provide a minimum of two uncontaminated, organics free confinement barriers for the packaged material.

NONE

1996-05-01T23:59:59.000Z

95

Tennessee Electrical Contractor Witnesses Stabilization | Department...  

Broader source: Energy.gov (indexed) [DOE]

Tennessee Electrical Contractor Witnesses Stabilization Tennessee Electrical Contractor Witnesses Stabilization April 2, 2010 - 11:31am Addthis Joshua DeLung David Andrews of...

96

EXISTENCE AND STABILITY RESULTS BASED ON ASYMPTOTIC ...  

E-Print Network [OSTI]

Abstract. This work is devoted to the study of existence and stability results of semidefi- .... work some stability results formerly proven in [4, 7, 21, 22] for linear,

2011-09-12T23:59:59.000Z

97

Irradiation Stability of Carbon Nanotubes  

E-Print Network [OSTI]

Ion irradiation of carbon nanotubes is a tool that can be used to achieve modification of the structure. Irradiation stability of carbon nanotubes was studied by ion and electron bombardment of the samples. Different ion species at various energies...

Aitkaliyeva, Assel

2010-01-14T23:59:59.000Z

98

Stabilization and Global Climate Policy  

E-Print Network [OSTI]

Academic and political debates over long-run climate policy often invoke ďstabilizationĒ of atmospheric concentrations of greenhouse gases (GHGs), but only rarely are non-CO2 greenhouse gases addressed explicitly. Even ...

Sarofim, Marcus C.

99

Quantum stabilizer codes and beyond  

E-Print Network [OSTI]

QUANTUM STABILIZER CODES AND BEYOND A Dissertation by PRADEEP KIRAN SARVEPALLI Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY August 2008 Major... Subject: Computer Science QUANTUM STABILIZER CODES AND BEYOND A Dissertation by PRADEEP KIRAN SARVEPALLI Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY...

Sarvepalli, Pradeep Kiran

2008-10-10T23:59:59.000Z

100

GEOMETRIC SOURCE SEPARATION: MERGING CONVOLUTIVE SOURCE  

E-Print Network [OSTI]

adaptive beamforming algorithms by a cross-power criteria, we gain new geometric source separation with convo- lutive blind source separation. We concentrate on cross-power spectral min- imization which is su to ambiguities in the choice of separating lters. There are in theory multiple lters that invert the room

Parra, Lucas C.

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

IEEE PES WM Panel on Modeling, Simulation and Applications of FACTS Controllers in Angle and Voltage Stability Studies, Singapore, Jan. 2000 Power Flow and Transient Stability Models of FACTS Controllers  

E-Print Network [OSTI]

, the Static Syn- chronous Source Series Compensator SSSC, and the Uni edPower FlowController UPFC appropriateIEEE PES WM Panel on Modeling, Simulation and Applications of FACTS Controllers in Angle and Voltage Stability Studies, Singapore, Jan. 2000 Power Flow and Transient Stability Models of FACTS

Ca√Īizares, Claudio A.

102

Simultaneous stabilization, avoidance and Goldberg's constants  

E-Print Network [OSTI]

to stabilizing the system which consists of a steam engine controlled by the governor. Several photographs

Eremenko, Alexandre

103

2.1E Supplement  

E-Print Network [OSTI]

125 (HPDefE) is the heat pump defrost energy. SYSTEMS A i runit (Btu/hr) HPDefE heat pump defrost energy (Btu) A.32HEAT PUMP ENHANCEMENTS Expanded Supplemental-heat-source and Defrost

Winkelmann, F.C.

2010-01-01T23:59:59.000Z

104

Stability of autonomous systems The pole placement problem Stabilization by state feedback State observers Pole placement and Stability, Pole Placement, Observers and  

E-Print Network [OSTI]

Stability of autonomous systems The pole placement problem Stabilization by state feedback State University of Groningen Stability, Pole Placement, Observers and Stabilization #12;Stability of autonomous and Outline 1 Stability of autonomous systems 2 The pole placement problem 3 Stabilization by state feedback 4

Trentelman, Harry L.

105

Analysis of potential combustion source impacts on acid deposition using an independently derived inventory. Volume II, appendices  

SciTech Connect (OSTI)

This document contains 2 appendices. The first documents the methodologies used to calculate production, unit energy consumption, fuel type and emission estimates for 16 industries and 35 types of facilities utilizing direct-fired industrial combustion processes, located in 26 states (and the District of Columbia) east of the Mississippi River. As discussed in the text of this report, a U.S. total of 16 industries and 45 types of facilities utilizing direct-fired combustion processes were identified by an elimination type method that was developed based on evaluation of fuel use in industrial SIC codes 20-39 to identify pollutant sources contributing to acid rain. The final population included only plants that have direct-fired fuel consumption greater than or equal to 100 x 10/sup 9/ Btu/yr of equivalent energy consumption. The goal for this analysis was to provide at least a 1980 base year for the data. This was achieved for all of the industries and in fact, 1981 data were used for a number of the industries evaluated. The second contains an analysis of all consumption of major fossil fuels to: (1) identify all fuel usage categories, and (2) identify the kinds of combustion equipment used within each category. This analysis provides a frame of reference for the balance of the study and permits using an energy accounting methodology to quantify the degree to which the inventoried sources in individual consuming sectors are complete and representative of the total population for the sector.

Not Available

1983-12-01T23:59:59.000Z

106

Stability-Constrained Optimal Power Flow and Its Application to Pricing Power System Stabilizers  

E-Print Network [OSTI]

locational marginal prices. A power system stabilizer (PSS) is then introduced in the test system, locational marginal prices, power system stabilizer, voltage stability. I. INTRODUCTION THE deregulation1 Stability-Constrained Optimal Power Flow and Its Application to Pricing Power System Stabilizers

Ca√Īizares, Claudio A.

107

The M31 population of supersoft sources  

E-Print Network [OSTI]

The 1991 ROSAT PSPC M31 X-ray point source catalog has been screened in order to set up a sample of candidate supersoft sources in this galaxy, additional to the 16 supersoft sources of Supper et al. (1997). 26 candidates have been found. Absorbing hydrogen column densities, effective temperatures and white dwarf masses (assuming the sources are on the stability line of surface nuclear burning) are derived. An observed white dwarf mass distribution is derived which indicates that the masses are constrained to values above 0.90 solar masses. The entire population of supersoft sources in M31 is estimated taking a theoretical white dwarf mass distribution into account, assuming that the observationally derived sample is restricted to white dwarf masses above 0.90 solar, and taking into account that the gas and the source population have a different scale height. A total number of at least 200-500 and at most 6,000-15,000 sources is deduced depending on the used galaxy N_H model, making use of the population synthesis calculation of Yungelson (1996). The spatial distribution favors a disk (or spiral-arm) dominated young stellar population with a ratio of 1/(4-7) of bulge/disk systems. Assuming that all supersoft sources with masses in excess of 0.5 solar masses are progenitors of supernovae of type Ia, a SN Ia rate of (0.8-7) 10^-3 yr^-1 is derived for M31 based on these progenitors. Supersoft sources might account for 20-100% of the total SN Ia rate in a galaxy like M31.

Peter Kahabka

1999-01-12T23:59:59.000Z

108

Designing, selecting and installing a residential ground-source heat pump system  

SciTech Connect (OSTI)

It's a compelling proposition: Use the near-constant-temperature heat underground to heat and cool your home and heat domestic water, slashing your energy bills. Yet despite studies demonstrating significant energy savings from ground-source heat pump (GSHP) systems, their adoption has been hindered by high upfront costs. Fewer than 1% of US homes use a GSHP system. However, compared to a minimum-code-compliant conventional space-conditioning system, when properly designed and installed, a GSHP retrofit at current market prices offers simple payback of 4.3 years on national average, considering existing federal tax credits. Most people understand how air-source heat pumps work: they move heat from indoor air to outdoor air when cooling and from outdoor air to indoor air when heating. The ground-source heat pump operates on the same principle, except that it moves heat to or from the ground source instead of outdoor air. The ground source is usually a vertical or horiontal ground heat exchanger. Because the ground usually has a more favorable temperature than ambient air for the heating and cooling operation of the vapor-compression refrigeration cycle, GSHP sysems can operate with much higher energy efficiencies than air-source heat pump systems when properly designed and installed. A GSHP system used in a residual building typically provides space conditioning and hot water and comprises three major components: a water-source heat pump unit designed to operate at a wider range of entering fluid temperatures (typically from 30 F to 110 F, or 1 C to 43 C) than a conventional water-source heat pump unit; a ground heat exchanger (GHX); and distribution systems to deliver hot water to the storage tank and heating or cooling to the conditioned rooms. In most residual GSHP systems, the circulation pumps and associated valves are integrated with the heat pump to circulate the heat-carrier fluid (water or aqueous antifreeze solution) through the heat pump and the GHX. A recent assessment indicates that if 20% of US homes replaced their existing space-conditioning and water-heating systems with properly designed, installed and operated state-of-the-art GSHP systems, it would yield significant benefits each year. These include 0.8 quad British thermal units (Btu) of primary energy savings, 54.3 million metric tons of CO{sub 2} emission reductions, $10.4 billion in energy cost savings and 43.2 gigawatts of reduction in summer peak electrical demand.

Hughes, Patrick [ORNL; Liu, Xiaobing [ORNL; Munk, Jeffrey D [ORNL

2010-01-01T23:59:59.000Z

109

DC source assemblies  

DOE Patents [OSTI]

Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

Campbell, Jeremy B; Newson, Steve

2013-02-26T23:59:59.000Z

110

Stability of charged thin shells  

SciTech Connect (OSTI)

In this article we study the mechanical stability of spherically symmetric thin shells with charge, in Einstein-Maxwell and Einstein-Born-Infeld theories. We analyze linearized perturbations preserving the symmetry, for shells around vacuum and shells surrounding noncharged black holes.

Eiroa, Ernesto F. [Instituto de Astronomia y Fisica del Espacio, C.C. 67, Suc. 28, 1428, Buenos Aires (Argentina); Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria Pab. I, 1428, Buenos Aires (Argentina); Simeone, Claudio [Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria Pab. I, 1428, Buenos Aires (Argentina); IFIBA, CONICET, Ciudad Universitaria Pab. I, 1428, Buenos Aires (Argentina)

2011-05-15T23:59:59.000Z

111

Aerodynamic Drag and Gyroscopic Stability  

E-Print Network [OSTI]

This paper describes the effects on aerodynamic drag of rifle bullets as the gyroscopic stability is lowered from 1.3 to 1.0. It is well known that a bullet can tumble for stability less than 1.0. The Sierra Loading Manuals (4th and 5th Editions) have previously reported that ballistic coefficient decreases significantly as gyroscopic stability, Sg, is lowered below 1.3. These observations are further confirmed by the experiments reported here. Measured ballistic coefficients were compared with gyroscopic stabilities computed using the Miller Twist Rule for nearly solid metal bullets with uniform density and computed using the Courtney-Miller formula for plastic-tipped bullets. The experiments reported here also demonstrate a decrease in aerodynamic drag near Sg = 1.23 +/- 0.02. It is hypothesized that this decrease in drag over a narrow band of Sg values is due to a rapid damping of coning motions (precession and nutation). Observation of this drag decrease at a consistent value of Sg demonstrates the relati...

Courtney, Elya R

2013-01-01T23:59:59.000Z

112

Material stabilization characterization management plan  

SciTech Connect (OSTI)

This document presents overall direction for characterization needs during stabilization of SNM at the Plutonium Finishing Plant (PFP). Technical issues for needed data and equipment are identified. Information on material categories and links to vulnerabilities are given. Comparison data on the material categories is discussed to assist in assessing the relative risks and desired processing priority.

GIBSON, M.W.

1999-08-31T23:59:59.000Z

113

Quantum stabilizer codes and beyond  

E-Print Network [OSTI]

The importance of quantum error correction in paving the way to build a practical quantum computer is no longer in doubt. This dissertation makes a threefold contribution to the mathematical theory of quantum error-correcting codes. Firstly, it extends the framework of an important class of quantum codes -- nonbinary stabilizer codes. It clarifies the connections of stabilizer codes to classical codes over quadratic extension fields, provides many new constructions of quantum codes, and develops further the theory of optimal quantum codes and punctured quantum codes. Secondly, it contributes to the theory of operator quantum error correcting codes also called as subsystem codes. These codes are expected to have efficient error recovery schemes than stabilizer codes. This dissertation develops a framework for study and analysis of subsystem codes using character theoretic methods. In particular, this work establishes a close link between subsystem codes and classical codes showing that the subsystem codes can be constructed from arbitrary classical codes. Thirdly, it seeks to exploit the knowledge of noise to design efficient quantum codes and considers more realistic channels than the commonly studied depolarizing channel. It gives systematic constructions of asymmetric quantum stabilizer codes that exploit the asymmetry of errors in certain quantum channels.

Pradeep Kiran Sarvepalli

2008-10-14T23:59:59.000Z

114

Dynamic radioactive particle source  

DOE Patents [OSTI]

A method and apparatus for providing a timed, synchronized dynamic alpha or beta particle source for testing the response of continuous air monitors (CAMs) for airborne alpha or beta emitters is provided. The method includes providing a radioactive source; placing the radioactive source inside the detection volume of a CAM; and introducing an alpha or beta-emitting isotope while the CAM is in a normal functioning mode.

Moore, Murray E.; Gauss, Adam Benjamin; Justus, Alan Lawrence

2012-06-26T23:59:59.000Z

115

SOURCE SELECTION INFORMATION -  

Office of Environmental Management (EM)

on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander Ranking Member SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION...

116

SOURCE SELECTION INFORMATION -  

Energy Savers [EERE]

on Energy and Water Development U.S. House of Representatives The Honorable Lamar Alexander SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR)...

117

Factors influencing antioxidant phytochemical stability of teas  

E-Print Network [OSTI]

polyphenolic profile of teas. To present fundamental information of phytochemical stability during tea storage, studies to determine the impacts of tea processing, different packaging materials, and various storage conditions on the phytochemical stability were...

Kim, Youngmok

2009-05-15T23:59:59.000Z

118

Simultaneous stabilization, avoidance and Goldberg's constants  

E-Print Network [OSTI]

was related to stabilizing the system which consists of a steam engine controlled by the governor. Several

Eremenko, Alexandre

119

Stabilization of Platinum Nanoparticle Electrocatalysts for Oxygen...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Platinum Nanoparticle Electrocatalysts for Oxygen Reduction Using Poly(diallyldimethylammonium chloride). Stabilization of Platinum Nanoparticle Electrocatalysts for Oxygen...

120

The Role of Carbon in Catalytically Stabilized Transition Metal Sulfides  

SciTech Connect (OSTI)

Since WWII considerable progress has been made in understanding the basis for the activity and the selectivity of molybdenum and tungsten based hydrotreating catalysts. Recently, the focus of investigation has turned to the structure of the catalytically stabilized active catalyst. The surface of the catalytically stabilized MoS2 has been shown to be carbided with the formula MoSxCy under hydrotreating conditions. In this paper we review the basis for this finding and present new data extending the concept to the promoted TMS (transition metal sulfides) systems CoMoC and NiMoC. Freshly sulfided CoMoS and NiMoS catalyst have a strong tendency to form the carbided surface phases from any available carbon source.

Kelty,S.; Berhault, G.; Chianelli, R.

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Longitudinal Beam Stability in the SUPER B-FACTORY  

SciTech Connect (OSTI)

We give an overview of wake fields and impedances in a proposed Super B project, which is based on extremely low emittance beams colliding at a large angle with a crab waist transformation. Understanding the effects that wake fields have on the beam is critical for a successful machine operation. We use our combined experience from the operation of the SLAC B-factory and DA{Phi}NE {Phi}-factory to eliminate strong HOM sources and minimize the chamber impedance in the Super B design. Based on a detailed study of the wake fields in this design we have developed a quasi-Green's function for the entire ring that is used to study bunch lengthening and beam stability. In particular, we check the stability threshold using numerical solutions of the Fokker-Plank equation. We also make a comparison of numerical simulations with the bunch lengthening data in the B- factory.

Novokhatski, A.; /SLAC; Zobov, M.; /Frascati

2009-07-06T23:59:59.000Z

122

Modeling of shallow stabilization ponds  

SciTech Connect (OSTI)

A two-dimensional hydrodynamic model is used to simulate shallow stabilization ponds. The model computes the flow field and the concentration distribution of a conservative tracer in the entire area of a pond. The location and the size of the dead zones, the bypassing, and the recirculating areas are also determined by the model. The numerical results are in good agreement with the experimental data obtained in the laboratory.

Babarutsi, S.; Marchand, P.; Safieddine, T.

1999-07-01T23:59:59.000Z

123

Structure stability and spectroscopy of metal clusters  

SciTech Connect (OSTI)

Theory based on self-consistent field-linear combinations of atomic orbitals-molecular orbital theory was applied to clusters. Four areas were covered: electronic structure, equilibrium geometries, and stability of charged clusters, interaction of metal clusters with H and halogen atoms, thermal stability of isolated clusters, and stability and optical properties of hetero-atomic clusters. (DLC)

Not Available

1993-01-01T23:59:59.000Z

124

Trading Away Financial Stability in Colombia  

E-Print Network [OSTI]

Trading Away Financial Stability in Colombia: Capital Controls and the US-Colombia Trade Agreement@bu.edu #12;Trading Away Financial Stability in Colombia: Capital Controls and the US-Colombia Trade Agreement SerieBrief # 66 | Abril 2011 Trading Away Financial Stability in Colombia: Capital Controls and the US-Colombia

Tufts University

125

Nonbinary Codeword Stabilized Quantum Codes  

E-Print Network [OSTI]

The codeword stabilized (CWS) quantum codes formalism presents a unifying approach to both additive and nonadditive quantum error-correcting codes (arXiv:0708.1021 [quant-ph]), but only for binary states. Here we generalize the CWS framework to the nonbinary case (of both prime and nonprime dimension) and map the search for nonbinary quantum codes to a corresponding search problem for classical nonbinary codes with specific error patterns. We show that while the additivity properties of nonbinary CWS codes are similar to the binary case, the structural properties of the nonbinary codes differ substantially from the binary case, even for prime dimensions. In particular, we identify specific structure patterns of stabilizer groups, based on which efficient constructions might be possible for codes that encode more dimensions than any stabilizer codes of the same length and distance; similar methods cannot be applied in the binary case. Understanding of these structural properties can help prune the search space and facilitate the identification of good nonbinary CWS codes.

Xie Chen; Bei Zeng; Isaac L. Chuang

2008-08-22T23:59:59.000Z

126

Radiation Source Replacement Workshop  

SciTech Connect (OSTI)

This report summarizes a Radiation Source Replacement Workshop in Houston Texas on October 27-28, 2010, which provided a forum for industry and researchers to exchange information and to discuss the issues relating to replacement of AmBe, and potentially other isotope sources used in well logging.

Griffin, Jeffrey W.; Moran, Traci L.; Bond, Leonard J.

2010-12-01T23:59:59.000Z

127

Lithium ion sources  

E-Print Network [OSTI]

HIFAN 1866 Lithium ion sources by Prabir K. Roy, Wayne G.No. DE-AC02-05CH11231. Lithium ion sources Prabir K. RoyUSA Abstract A 10.9 cm diameter lithium alumino-silicate ion

Roy, Prabir K.

2014-01-01T23:59:59.000Z

128

Neutron sources and applications  

SciTech Connect (OSTI)

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

1994-01-01T23:59:59.000Z

129

Photonic crystal light source  

DOE Patents [OSTI]

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

130

Piezotube borehole seismic source  

DOE Patents [OSTI]

A piezoelectric borehole source capable of permanent or semipermanent insertion into a well for uninterrupted well operations is described. The source itself comprises a series of piezoelectric rings mounted to an insulative mandrel internally sized to fit over a section of well tubing, the rings encased in a protective housing and electrically connected to a power source. Providing an AC voltage to the rings will cause expansion and contraction sufficient to create a sonic pulse. The piezoelectric borehole source fits into a standard well, and allows for uninterrupted pass-through of production tubing, and other tubing and electrical cables. Testing using the source may be done at any time, even concurrent with well operations, during standard production.

Daley, Tom M; Solbau, Ray D; Majer, Ernest L

2014-05-06T23:59:59.000Z

131

Pulsed ion beam source  

DOE Patents [OSTI]

An improved pulsed ion beam source having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center.

Greenly, John B. (Lansing, NY)

1997-01-01T23:59:59.000Z

132

Frequency stability considerations in the design of battery-powered VHF transmitters  

E-Print Network [OSTI]

Klughart, S, B. , Massachusetts Institute of Technology Chair of Advisory Committee: Dr. Edgar Sanchez-Sinencio Traditional VHF transmitter oscillators operating in the 50-100 MHz frequency range have as their power source a regulated power supply with a..., the variation in pawer supply voltage and non-zero battery supply source resistance are of greater impact on oscillator frequency stability than temperature variations. The major mechanisms which contribute to this &equency drift are due to changes in active...

Klughart, Kevin Mark

1992-01-01T23:59:59.000Z

133

Benchmarking kinetic calculations of resistive wall mode stability  

SciTech Connect (OSTI)

Validating the calculations of kinetic resistive wall mode (RWM) stability is important for confidently predicting RWM stable operating regions in ITER and other high performance tokamaks for disruption avoidance. Benchmarking the calculations of the Magnetohydrodynamic Resistive SpectrumóKinetic (MARS-K) [Y. Liu et al., Phys. Plasmas 15, 112503 (2008)], Modification to Ideal Stability by Kinetic effects (MISK) [B. Hu et al., Phys. Plasmas 12, 057301 (2005)], and Perturbed Equilibrium Nonambipolar Transport (PENT) [N. Logan et al., Phys. Plasmas 20, 122507 (2013)] codes for two Solov'ev analytical equilibria and a projected ITER equilibrium has demonstrated good agreement between the codes. The important particle frequencies, the frequency resonance energy integral in which they are used, the marginally stable eigenfunctions, perturbed Lagrangians, and fluid growth rates are all generally consistent between the codes. The most important kinetic effect at low rotation is the resonance between the mode rotation and the trapped thermal particle's precession drift, and MARS-K, MISK, and PENT show good agreement in this term. The different ways the rational surface contribution was treated historically in the codes is identified as a source of disagreement in the bounce and transit resonance terms at higher plasma rotation. Calculations from all of the codes support the present understanding that RWM stability can be increased by kinetic effects at low rotation through precession drift resonance and at high rotation by bounce and transit resonances, while intermediate rotation can remain susceptible to instability. The applicability of benchmarked kinetic stability calculations to experimental results is demonstrated by the prediction of MISK calculations of near marginal growth rates for experimental marginal stability points from the National Spherical Torus Experiment (NSTX) [M. Ono et al., Nucl. Fusion 40, 557 (2000)].

Berkery, J. W.; Sabbagh, S. A. [Department of Applied Physics and Applied Mathematics, Columbia University, New York, New York 10027 (United States)] [Department of Applied Physics and Applied Mathematics, Columbia University, New York, New York 10027 (United States); Liu, Y. Q. [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom)] [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Wang, Z. R.; Logan, N. C.; Park, J.-K.; Manickam, J. [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States); Betti, R. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)] [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)

2014-05-15T23:59:59.000Z

134

Bounds on Effective Hamiltonians for Stabilizer Codes  

E-Print Network [OSTI]

This manuscript introduces various notions of k-locality of stabilizer codes inherited from the associated stabilizer groups. A choice of generators for the group leads to a Hamiltonian with the code in its groundspace, while a Hamiltonian holding the code in its groundspace might be called effective if its locality is less than that of a natural choice of generators (or any choice). This paper establishes some conditions under which effective Hamiltonians for stabilizer codes do not exist. Our results simplify in the cases of Calderbank-Shor-Steane stabilizer codes and topologically-ordered stabilizer codes arising from surface cellulations.

Stephen S. Bullock; Dianne P. O'Leary

2008-02-05T23:59:59.000Z

135

EECBG Direct Equipment Purchase Air Conditioner Guide Equipment Type  

E-Print Network [OSTI]

EECBG Direct Equipment Purchase Air Conditioner Guide Equipment Type Size Category (Btu/h) Size.ahridirectory.org/ceedirectory/pages/ac/cee/defaultSearch.aspx 12,000 Btu/h = 1 ton Less than 65,000 Btu/h Air Conditioners, Air Cooled Air Conditioners, Water completed by the California Energy Commission at a rate of 12,000 Btu/h per ton of air conditioning Source

136

Tunable terahertz radiation source  

SciTech Connect (OSTI)

Terahertz radiation source and method of producing terahertz radiation, said source comprising a junction stack, said junction stack comprising a crystalline material comprising a plurality of self-synchronized intrinsic Josephson junctions; an electrically conductive material in contact with two opposing sides of said crystalline material; and a substrate layer disposed upon at least a portion of both the crystalline material and the electrically-conductive material, wherein the crystalline material has a c-axis which is parallel to the substrate layer, and wherein the source emits at least 1 mW of power.

Boulaevskii, Lev; Feldmann, David M; Jia, Quanxi; Koshelev, Alexei; Moody, Nathan A

2014-01-21T23:59:59.000Z

137

Microfabricated diffusion source  

DOE Patents [OSTI]

A microfabricated diffusion source to provide for a controlled diffusion rate of a vapor comprises a porous reservoir formed in a substrate that can be filled with a liquid, a headspace cavity for evaporation of the vapor therein, a diffusion channel to provide a controlled diffusion of the vapor, and an outlet to release the vapor into a gas stream. The microfabricated diffusion source can provide a calibration standard for a microanalytical system. The microanalytical system with an integral diffusion source can be fabricated with microelectromechanical systems technologies.

Oborny, Michael C. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM); Manginell, Ronald P. (Albuquerque, NM)

2008-07-15T23:59:59.000Z

138

MULTICHANNEL BLIND DECONVOLUTION OF ARBITRARY SIGNALS: ADAPTIVE ALGORITHMS AND STABILITY ANALYSIES  

E-Print Network [OSTI]

MULTICHANNEL BLIND DECONVOLUTION OF ARBITRARY SIGNALS: ADAPTIVE ALGORITHMS AND STABILITY ANALYSIES for the multichannel blind deconvolution of arbitrary non-Gaussian source mixtures. Two of the algorithms are spa- tia-temporal extensions of recently-derived blind signal separation algorithms that combine kurta- sis-based contrast

Douglas, Scott C.

139

A surface ionization source  

E-Print Network [OSTI]

The main part of the work described herein is the development and testing of a surface ionization source for use on a collinear fast beam laser spectroscopy apparatus. A description of the previously existing fast beam apparatus is given...

Buzatu, Daniel J.

1995-01-01T23:59:59.000Z

140

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Galactic Superluminal Sources  

E-Print Network [OSTI]

A new class of X-ray sources was clearly established with the discovery of highly relativistic radio jets from the galactic sources GRS 1915+105 and GRO J1655-40. Both of these objects have given us a broader view of black holes and the formation of jets, yet they also show the complexity of the accretion environment near relativistic objects. The fast apparent motion of the jets, their luminosity and variability, their high energy spectrum, and approximate scaling to the behavior of active galactic nuclei, certainly warrant the description "microquasar". I present a review of the observational data on these sources, and discuss where we stand on a physical picture of GRS 1915+105 and GRO J1655-40 as taken from multi-wavelength studies. I also point out other galactic sources which share some of the properties of the microquasars, and what to look for as a high energy "signature" in future observations.

B. A. Harmon

1998-12-21T23:59:59.000Z

142

ION SOURCES FOR CYCLOTRONS  

E-Print Network [OSTI]

These utilize lasers, plasma focus, sparks, and ex≠ plodingextractor voltage A plasma focus device has been used byf n a s Fig. 22: The plasma focus high charge state source

Clark, D.J.

2010-01-01T23:59:59.000Z

143

Computerized Energy Information Sources  

E-Print Network [OSTI]

Many computerized files of energy- and energy conservation-related information are currently available through commercial and governmental sources such as Lockheed Information Systems, System Development Corporation, and DOE/RECON. Private...

Gordon, D.

1979-01-01T23:59:59.000Z

144

Field emission electron source  

DOE Patents [OSTI]

A novel field emitter material, field emission electron source, and commercially feasible fabrication method is described. The inventive field emission electron source produces reliable electron currents of up to 400 mA/cm.sup.2 at 200 volts. The emitter is robust and the current it produces is not sensitive to variability of vacuum or the distance between the emitter tip and the cathode. The novel emitter has a sharp turn-on near 100 volts.

Zettl, Alexander Karlwalter (Kensington, CA); Cohen, Marvin Lou (Berkeley, CA)

2000-01-01T23:59:59.000Z

145

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

146

Magnetron sputtering source  

DOE Patents [OSTI]

A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal.

Makowiecki, Daniel M. (Livermore, WA); McKernan, Mark A. (Livermore, CA); Grabner, R. Fred (Brentwood, CA); Ramsey, Philip B. (Livermore, CA)

1994-01-01T23:59:59.000Z

147

Magnetron sputtering source  

DOE Patents [OSTI]

A magnetron sputtering source for sputtering coating substrates includes a high thermal conductivity electrically insulating ceramic and magnetically attached sputter target which can eliminate vacuum sealing and direct fluid cooling of the cathode assembly. The magnetron sputtering source design results in greater compactness, improved operating characteristics, greater versatility, and low fabrication cost. The design easily retrofits most sputtering apparatuses and provides for safe, easy, and cost effective target replacement, installation, and removal. 12 figs.

Makowiecki, D.M.; McKernan, M.A.; Grabner, R.F.; Ramsey, P.B.

1994-08-02T23:59:59.000Z

148

A Test Stand for Ion Sources of Ultimate Reliability  

SciTech Connect (OSTI)

The rationale behind the ITUR project is to perform a comparison between different kinds of H{sup -} ion sources using the same beam diagnostics setup. In particular, a direct comparison will be made in terms of the emittance characteristics of Penning Type sources such as those currently in use in the injector for the ISIS (UK) Pulsed Neutron Source and those of volumetric type such as that driving the injector for the ORNL Spallation Neutron Source (TN, U.S.A.). The endeavour here pursued is thus to build an Ion Source Test Stand where virtually any type of source can be tested and its features measured and, thus compared to the results of other sources under the same gauge. It would be possible then to establish a common ground for effectively comparing different ion sources. The long term objectives are thus to contribute towards building compact sources of minimum emittance, maximum performance, high reliability-availability, high percentage of desired particle production, stability and high brightness. The project consortium is lead by Tekniker-IK4 research centre and partners are companies Elytt Energy and Jema Group. The technical viability is guaranteed by the collaboration between the project consortium and several scientific institutions, such the CSIC (Spain), the University of the Basque Country (Spain), ISIS (STFC-UK), SNS (ORNL-USA) and CEA in Saclay (France)

Enparantza, R.; Uriarte, L.; Romano, P.; Alonso, J.; Ariz, I.; Egiraun, M. [Fundacion Tekniker-IK4, Eibar (Spain); Bermejo, F. J.; Etxebarria, V. [University of the Basque Country, Dpt. Electricity and Electronics, Leioa, Spain, and Consejo Superior de Investgaciones Cientificas, Inst. Estructura de la Materia (Spain); Lucas, J. [Elytt Energy, Portugalete (Spain); Del Rio, J. M. [Jema Group, Lasarte (Spain); Letchford, A.; Faircloth, D. [ISIS Accelerator Division, Rutherford Appleton Laboratory, Didcot (United Kingdom); Stockli, M. [Spallation Neutron Source, Oak Ridge National Lab, Oak Ridge (United States)

2009-03-12T23:59:59.000Z

149

POTENTIAL MARKETS FOR HIGH-BTU GAS FROM COAL  

SciTech Connect (OSTI)

It has become increasilngly clear that the energy-related ilemna facing this nation is both a long-term and deepening problem. A widespread recognition of the critical nature of our energy balance, or imbalance, evolved from the Arab Oil Embargo of 1973. The seeds of this crisis were sown in the prior decade, however, as our consumption of known energy reserves outpaced our developing of new reserves. The resultant increasing dependence on foreign energy supplies hs triggered serious fuel shortages, dramatic price increases, and a pervsive sense of unertainty and confusion throughout the country.

Booz, Allen, and Hamilton, Inc.,

1980-04-01T23:59:59.000Z

150

Fumigation of a diesel engine with low Btu gas  

SciTech Connect (OSTI)

A 0.5 liter single-cylinder, indirect-injection diesel engine has been fumigated with producer gas. Measurements of power, efficiency, cylinder pressure, and emissions were made. At each operating condition, engine load was held constant, and the gas-to-diesel fuel ratio was increased until abnormal combustion was encountered. This determined the maximum fraction of the input energy supplied by the gas, E/sub MAX/, which was found to be dependent upon injection timing and load. At light loads, E/sub MAX/ was limited by severe efficiency loss and missfire, while at heavy loads it was limited by knock or preignition. Fumigation generally increased ignition delay and heat release rates, but peak pressures were not strongly influenced. Efficiency was slightly decreased by fumigation as were NO/sub X/ and particle emissions while CO emissions were increased.

Ahmadi, M.; Kittelson, D.B.

1985-01-01T23:59:59.000Z

151

Natural Gas Futures Contract 2 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECS Survey Data 2010 | 2006 | 2002 |J.MonthlyU.S.O F4.34

152

Natural Gas Futures Contract 3 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECS Survey Data 2010 | 2006 | 2002 |J.MonthlyU.S.O F4.34Week Of

153

Natural Gas Futures Contract 4 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECS Survey Data 2010 | 2006 | 2002 |J.MonthlyU.S.O F4.34Week

154

Natural Gas Futures Contract 1 (Dollars per Million Btu)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn Cyber Security NuclearNew testloading new

155

Natural Gas Futures Contract 1 (Dollars per Million Btu)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn Cyber Security NuclearNew testloading newYear Jan

156

Natural Gas Futures Contract 1 (Dollars per Million Btu)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn Cyber Security NuclearNew testloading newYear

157

Henry Hub Natural Gas Spot Price (Dollars per Million Btu)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun with Bigfront.jpgcommunity200cellHeat TransferHelping Make TheHenry C.Henry

158

Henry Hub Natural Gas Spot Price (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs U.S.WyomingExpansionReservesFoot)ThousandDecade

159

Henry Hub Natural Gas Spot Price (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs U.S.WyomingExpansionReservesFoot)ThousandDecadeYear

160

Henry Hub Natural Gas Spot Price (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Natural Gas Futures Contract 2 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per6.48(Millionthroughthroughthrough4.93

162

Natural Gas Futures Contract 2 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per6.48(Millionthroughthroughthrough4.93Year Jan

163

Natural Gas Futures Contract 2 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per6.48(Millionthroughthroughthrough4.93Year

164

Natural Gas Futures Contract 3 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs Year2per6.48(Millionthroughthroughthrough4.93YearDecade

165

Natural Gas Futures Contract 3 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs

166

Natural Gas Futures Contract 3 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month Week 1 Week 2 Week 3 Week 4 Week 5 End Date

167

Natural Gas Futures Contract 4 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month Week 1 Week 2 Week 3 Week 4 Week 5 End

168

Natural Gas Futures Contract 4 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month Week 1 Week 2 Week 3 Week 4 Week 5 EndYear

169

Natural Gas Futures Contract 4 (Dollars per Million Btu)  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing ReservoirsYear-Month Week 1 Week 2 Week 3 Week 4 Week 5

170

Natural Gas Futures Contract 2 (Dollars per Million Btu)  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30 2013 Macroeconomic team: Kay6164,778,907throughthroughthroughWeek Of Mon

171

Natural Gas Futures Contract 3 (Dollars per Million Btu)  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30 2013 Macroeconomic team: Kay6164,778,907throughthroughthroughWeek Of

172

Natural Gas Futures Contract 4 (Dollars per Million Btu)  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S.30 2013 Macroeconomic team: Kay6164,778,907throughthroughthroughWeek OfWeek

173

Henry Hub Natural Gas Spot Price (Dollars per Million Btu)  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam CoalReserves (Million Barrels)Reserves from%Year Jan Feb Mar Apr

174

Natural Gas Futures Contract 1 (Dollars per Million Btu)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Regionat Cornell Batteries &NSTCurrent Issues & Trends See

175

Property:Geothermal/CapacityBtuHr | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug PowerAddressDataFormat JumpNercMroURL.AwardeeCostShare

176

Stabilization of hazardous/mixed K061 wastes  

SciTech Connect (OSTI)

The K061 Stabilization Program is an ongoing testing and treatment program jointly conducted between Envirocare of Utah, Inc., and Fluid Tech, Inc. (FTI). This program is comprised of a series of treatability testing projects, each of which is individually developed to optimize the treatment conditions for stabilization of Electric Arc Furnace (EAF) dust which has become accidentally contaminated with Cs-137 sources. EAF dust is the aerial effluent collected above the vats of molten scrap steel heated to 3000{degrees} C at steel plants. The EAF dust is pulled off into the dust evacuation vents and collected in the baghouse. Most steel mills ship EAF dust to other smelters, such as Horsehead, which process the EAF dust to separate the various metals, such as iron, zinc, magnesium, manganese, lead, cadmium, chromium and copper. Occasionally during the melting of recycled steel a smokestack emission density gauge containing radioactive Cs-137 will be included with the steel being reprocessed. During melting, the gauge casing is breached, releasing Cs-137 into the vat. This report describes the program to stabilize the mixed K061 wastes.

Brimley, R. [Envirocare of Utah, Inc., Salt Lake City, UT (United States); Murarik, T.M. [Fluid Tech, Inc., Las Vegas, NV (United States)

1995-09-01T23:59:59.000Z

177

Operational control of boiling water reactor stability  

SciTech Connect (OSTI)

Boiling water reactor cores are susceptible to instabilities, which generate power oscillations. Specific reactor operating practices can provide a mechanism for control of the instability phenomenon. An axial separation of the core into a single-phase region and a two-phase region resolves the influence of axial flux shapes on core stability. This separation provides the means to derive a core stability control that ensures significant reactor stability margin. The control is achieved by maintaining the core average bulk coolant saturation elevation above a predetermined axial plane. The control can be reliably and efficiently implemented during reactor operations. Analysis demonstrates that variations in parameters important to stability have only secondary influences on stability margin when the control is in effect. Actual plant experience with a large commercial boiling water reactor confirms the capabilities of this stability control in an operational setting.

Mowry, C.M. [PECO Energy, Wayne, PA (United States); Nir, I. [Entergy Operations, Jackson, MS (United States); Newkirk, D.W. [GE Nuclear Energy, San Jose, CA (United States)

1995-03-01T23:59:59.000Z

178

Codeword stabilized quantum codes on subsystems  

E-Print Network [OSTI]

Codeword stabilized quantum codes provide a unified approach to constructing quantum error-correcting codes, including both additive and non-additive quantum codes. Standard codeword stabilized quantum codes encode quantum information into subspaces. The more general notion of encoding quantum information into a subsystem is known as an operator (or subsystem) quantum error correcting code. Most operator codes studied to date are based in the usual stabilizer formalism. We introduce operator quantum codes based on the codeword stabilized quantum code framework. Based on the necessary and sufficient conditions for operator quantum error correction, we derive a error correction condition for operator codeword stabilized quantum codes. Based on this condition, the word operators of a operator codeword stabilized quantum code are constructed from a set of classical binary errors induced by generators of the gauge group. We use this scheme to construct examples of both additive and non-additive codes that encode quantum information into a subsystem.

Jeonghwan Shin; Jun Heo; Todd A. Brun

2012-08-29T23:59:59.000Z

179

System for adding sulfur to a fuel cell stack system for improved fuel cell stability  

DOE Patents [OSTI]

A system for adding sulfur to a reformate stream feeding a fuel cell stack, having a sulfur source for providing sulfur to the reformate stream and a metering device in fluid connection with the sulfur source and the reformate stream. The metering device injects sulfur from the sulfur source to the reformate stream at a predetermined rate, thereby providing a conditioned reformate stream to the fuel cell stack. The system provides a conditioned reformate stream having a predetermined sulfur concentration that gives an acceptable balance of minimal drop in initial power with the desired maximum stability of operation over prolonged periods for the fuel cell stack.

Mukerjee, Subhasish; Haltiner, Jr., Karl J; Weissman, Jeffrey G

2013-08-13T23:59:59.000Z

180

Pulsed ion beam source  

DOE Patents [OSTI]

An improved pulsed ion beam source is disclosed having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center. 12 figs.

Greenly, J.B.

1997-08-12T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Stabilization of polyaniline solutions through additives  

DOE Patents [OSTI]

A stabilized non-conductive polyaniline solution comprising from about 1 to about 10 percent by weight polyaniline or a polyaniline derivative, from about 90 to about 99 percent by weight N-methylpyrrolidone, and from about 0.5 percent by weight to about 15 percent by weight of a solution stabilizing additive selected from the group consisting of hindered amine light stabilizers, polymeric amines, and dialkylamines, percent by weight of additive based on the total weight of polyaniline or polyaniline derivative is provided together with a method for stabilizing a polyaniline solution. 4 figs.

Wrobleski, D.A.; Benicewicz, B.C.

1996-12-10T23:59:59.000Z

182

Stabilization of polyaniline solutions through additives  

DOE Patents [OSTI]

A stabilized non-conductive polyaniline solution comprising from about 1 to bout 10 percent by weight polyaniline or a polyaniline derivative, from about 90 to about 99 percent by weight N-methylpyrrolidone, and from about 0.5 percent by weight to about 15 percent by weight of a solution stabilizing additive selected from the group consisting of hindered amine light stabilizers, polymeric amines, and dialkylamines, percent by weight of additive based on the total weight of polyaniline or polyaniline derivative is provided together with a method for stabilizing a polyaniline solution.

Wrobleski, Debra A. (Los Alamos, NM); Benicewicz, Brian C. (Los Alamos, NM)

1996-01-01T23:59:59.000Z

183

Singular Limits in Polymer Stabilized Liquid Crystals  

E-Print Network [OSTI]

We investigate equilibrium configurations for a polymer stabilized liquid crys- tal material ... eling the cross section of the liquid crystal-polymer fiber composite.

1910-31-00T23:59:59.000Z

184

Stabilization of Electrocatalytic Metal Nanoparticles at Metal...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrocatalytic Metal Nanoparticles at Metal-Metal Oxide-Graphene Triple Junction Points. Stabilization of Electrocatalytic Metal Nanoparticles at Metal-Metal Oxide-Graphene...

185

HOLOMORPHIC MOTIONS AND STRUCTURAL STABILITY FOR ...  

E-Print Network [OSTI]

namics in one variable, we prove the structural stability of hyperbolic polynomial automor- phisms in ..... This extension is characterized by a harmonic Beltrami.

1910-70-80T23:59:59.000Z

186

Chemically stabilized ionomers containing inorganic fillers  

DOE Patents [OSTI]

Ionomeric polymers that are chemically stabilized and contain inorganic fillers are prepared, and show reduced degradation. The ionomers care useful in membranes and electrochemical cells.

Roelofs, Mark Gerrit

2013-12-31T23:59:59.000Z

187

On the Dynamic Stability of Electricity Markets  

E-Print Network [OSTI]

issues affecting market stability. In particular, we establish a control-theoretical frame- work that uses concepts arising in electricity markets, dynamic games, and

2011-02-09T23:59:59.000Z

188

Stabilizing control design of a motorcycle.  

E-Print Network [OSTI]

??This thesis solves the stabilizing control of an autonomous motorcycle. The control of an autonomous motorcycle is a challenging and interesting problem in the fieldÖ (more)

Yuan, F

2007-01-01T23:59:59.000Z

189

Dual source heat pump  

DOE Patents [OSTI]

What is disclosed is a heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating the fluid in heat exchange relationship with a refrigerant fluid; at least two refrigerant heat exchangers, one for effecting heat exchange with the fluid and a second for effecting heat exchange between refrigerant and a heat exchange fluid and the ambient air; a compressor for efficiently compressing the refrigerant; at least one throttling valve for throttling liquid refrigerant; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circulating device and heat exchange fluid circuit for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and direction of flow of the refrigerant therethrough for selecting a particular mode of operation. The heat exchange fluid provides energy for defrosting the second heat exchanger when operating in the air source mode and also provides a alternate source of heat.

Ecker, Amir L. (Dallas, TX); Pietsch, Joseph A. (Dallas, TX)

1982-01-01T23:59:59.000Z

190

Surface rheology and interface stability.  

SciTech Connect (OSTI)

We have developed a mature laboratory at Sandia to measure interfacial rheology, using a combination of home-built, commercially available, and customized commercial tools. An Interfacial Shear Rheometer (KSV ISR-400) was modified and the software improved to increase sensitivity and reliability. Another shear rheometer, a TA Instruments AR-G2, was equipped with a du Nouey ring, bicone geometry, and a double wall ring. These interfacial attachments were compared to each other and to the ISR. The best results with the AR-G2 were obtained with the du Nouey ring. A Micro-Interfacial Rheometer (MIR) was developed in house to obtain the much higher sensitivity given by a smaller probe. However, it was found to be difficult to apply this technique for highly elastic surfaces. Interfaces also exhibit dilatational rheology when the interface changes area, such as occurs when bubbles grow or shrink. To measure this rheological response we developed a Surface Dilatational Rheometer (SDR), in which changes in surface tension with surface area are measured during the oscillation of the volume of a pendant drop or bubble. All instruments were tested with various surfactant solutions to determine the limitations of each. In addition, foaming capability and foam stability were tested and compared with the rheology data. It was found that there was no clear correlation of surface rheology with foaming/defoaming with different types of surfactants, but, within a family of surfactants, rheology could predict the foam stability. Diffusion of surfactants to the interface and the behavior of polyelectrolytes were two subjects studied with the new equipment. Finally, surface rheological terms were added to a finite element Navier-Stokes solver and preliminary testing of the code completed. Recommendations for improved implementation were given. When completed we plan to use the computations to better interpret the experimental data and account for the effects of the underlying bulk fluid.

Yaklin, Melissa A.; Cote, Raymond O.; Moffat, Harry K.; Grillet, Anne Mary; Walker, Lynn; Koehler, Timothy P.; Reichert, Matthew D. (Carnegie Mellon University, Pittsburgh, PA); Castaneda, Jaime N.; Mondy, Lisa Ann; Brooks, Carlton, F.

2010-11-01T23:59:59.000Z

191

INEEL Source Water Assessment  

SciTech Connect (OSTI)

The Idaho National Engineering and Environmental Laboratory (INEEL) covers approximately 890 mi2 and includes 12 public water systems that must be evaluated for Source water protection purposes under the Safe Drinking Water Act. Because of its size and location, six watersheds and five aquifers could potentially affect the INEELís drinking water sources. Based on a preliminary evaluation of the available information, it was determined that the Big Lost River, Birch Creek, and Little Lost River Watersheds and the eastern Snake River Plain Aquifer needed to be assessed. These watersheds were delineated using the United States Geologic Surveyís Hydrological Unit scheme. Well capture zones were originally estimated using the RESSQC module of the Environmental Protection Agencyís Well Head Protection Area model, and the initial modeling assumptions and results were checked by running several scenarios using Modflow modeling. After a technical review, the resulting capture zones were expanded to account for the uncertainties associated with changing groundwater flow directions, a thick vadose zone, and other data uncertainties. Finally, all well capture zones at a given facility were merged to a single wellhead protection area at each facility. A contaminant source inventory was conducted, and the results were integrated with the well capture zones, watershed and aquifer information, and facility information using geographic information system technology to complete the INEELís Source Water Assessment. Of the INEELís 12 public water systems, three systems rated as low susceptibility (EBR-I, Main Gate, and Gun Range), and the remainder rated as moderate susceptibility. No INEEL public water system rated as high susceptibility. We are using this information to develop a source water management plan from which we will subsequently implement an INEEL-wide source water management program. The results are a very robust set of wellhead protection areas that will protect the INEELís public water systems yet not too conservative to inhibit the INEEL from carrying out its missions.

Sehlke, Gerald

2003-03-01T23:59:59.000Z

192

COMBUSTION SOURCES OF NITROGEN COMPOUNDS  

E-Print Network [OSTI]

Rasmussen, R.A. (1976). Combustion as a source of nitrousx control for stationary combustion sources. Prog. Energy,CA, March 3-4, 1977 COMBUSTION SOURCES OF NITROGEN COMPOUNDS

Brown, Nancy J.

2011-01-01T23:59:59.000Z

193

OLED area illumination source  

DOE Patents [OSTI]

The present invention relates to an area illumination light source comprising a plurality of individual OLED panels. The individual OLED panels are configured in a physically modular fashion. Each OLED panel comprising a plurality of OLED devices. Each OLED panel comprises a first electrode and a second electrode such that the power being supplied to each individual OLED panel may be varied independently. A power supply unit capable of delivering varying levels of voltage simultaneously to the first and second electrodes of each of the individual OLED panels is also provided. The area illumination light source also comprises a mount within which the OLED panels are arrayed.

Foust, Donald Franklin (Scotia, NY); Duggal, Anil Raj (Niskayuna, NY); Shiang, Joseph John (Niskayuna, NY); Nealon, William Francis (Gloversville, NY); Bortscheller, Jacob Charles (Clifton Park, NY)

2008-03-25T23:59:59.000Z

194

Use of surplus napalm as an energy source  

SciTech Connect (OSTI)

The current military surplus of napalm should be viewed as an energy source rather than as hazardous waste. The energy content of this resource is too valuable to waste. There are at present significant problems to be overcome both scientifically and politically before this material can be used as an energy source. Scientific problems include solubility in a proper fuel matrix, methods to ensure complete combustion, and safety in transportation and handling. In this paper, the authors present data on gasoline and benzene extraction from napalm, napalm fuel matrix solubilities, burner characteristics of these napalm fuel mixtures, and the accelerated storage stability studies of these mixtures.

Mushrush, G.W.; Beal, E.J.; Hardy, D.R.; Hughes, J.M.

2000-03-01T23:59:59.000Z

195

Selective ion source  

DOE Patents [OSTI]

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P{sup +} from PH{sub 3}. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P{sup +}, As{sup +}, and B{sup +} without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices. 6 figs.

Leung, K.N.

1996-05-14T23:59:59.000Z

196

Selective ion source  

DOE Patents [OSTI]

A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P.sup.+ from PH.sub.3. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P.sup.+, AS.sup.+, and B.sup.+ without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices.

Leung, Ka-Ngo (Hercules, CA)

1996-01-01T23:59:59.000Z

197

Sealed Radioactive Source Accountability  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish Department of Energy (DOE) interim policy and to provide guidance for sealed radioactive source accountability. The directive does not cancel any directives. Extended by DOE N 5400.10 to 12-24-93 & Extended by DOE N 5400.12 to 12-24-94.

1991-12-24T23:59:59.000Z

198

Sealed Radioactive Source Accountability  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Notice extends DOE N 5400.9, Sealed Radioactive Source Accountability, of 12-24-91, until 12-24-95, unless sooner superseded or rescinded. The contents of DOE N 5400.9 will be updated and incorporated in the revised DOE O 5480.11, Radiation Protection for Occupational Workers.

1994-12-22T23:59:59.000Z

199

Improved Simulation of Stabilizer Circuits Scott Aaronson #  

E-Print Network [OSTI]

Improved Simulation of Stabilizer Circuits Scott Aaronson # University of California, Berkeley---that is, a quantum circuit con­ sisting solely of CNOT, Hadamard, and phase gates---can be simulated e that stabilizer circuits are probably not even universal for classical computation. Third, we give e

Aaronson, Scott

200

Stability design of long precast concrete beams  

E-Print Network [OSTI]

Stability design of long precast concrete beams T. J. Stratford, BA, MEng, C. J. Burgoyne BA, MSc needed for design engineers to check the stability of precast concrete beams when simply supported loads can be determined and how estimates can be made of the eect of imperfections both in the beam

Burgoyne, Chris

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Stabilization of Mechanical Systems Using Controlled Lagrangians  

E-Print Network [OSTI]

of an inverted pendulum on a cart and for the problem of stabilization of rotation of a rigid spacecraft about grant DMS--91--57556, AFOSR grant F49620≠96≠1≠ 0100, a GuggenheimFellowship and the Inst. for Advanced. cally provide a Lyapunov function for choosing control gains and proving closed≠loop stability. Further

Leonard, Naomi

202

Characterization and stability properties of polar extracts derived from a recent shale liquid  

SciTech Connect (OSTI)

A shale fuel of marginal stability has been used as a source of nitrogen-rich polar extracts. Polar compounds were isolated by mild acid extraction followed by silica gel adsorption and were identified by GC/MS. Alkyl substituted pyridines were the prevalent class of compounds present in most extracts. The effects of adding these shale derived fractions as dopants to a stable shale diesel fuel (D-11) were examined in terms of sediment formation and peroxide number under accelerated storage stability test conditions. The activities of the extracts in inducing fuel instability were correlated with their composition.

Mushrush, G.W.; Cooney, J.V.; Beal, E.J.; Hazlett, R.N.

1986-01-01T23:59:59.000Z

203

Laser stabilization using spectral hole burning  

E-Print Network [OSTI]

We have frequency stabilized a Coherent CR699-21 dye laser to a transient spectral hole on the 606 nm transition in Pr^{+3}:Y_2SiO_5. A frequency stability of 1 kHz has been obtained on the 10 microsecond timescale together with a long-term frequency drift below 1 kHz/s. RF magnetic fields are used to repopulate the hyperfine levels allowing us to control the dynamics of the spectral hole. A detailed theory of the atomic response to laser frequency errors has been developed which allows us to design and optimize the laser stabilization feedback loop, and specifically we give a stability criterion that must be fulfilled in order to obtain very low drift rates. The laser stability is sufficient for performing quantum gate experiments in Pr^{+3}:Y_2SiO_5.

L. Rippe; B. Julsgaard; A. Walther; S. KrŲll

2006-11-05T23:59:59.000Z

204

Entanglement-assisted codeword stabilized quantum codes  

SciTech Connect (OSTI)

Entangled qubits can increase the capacity of quantum error-correcting codes based on stabilizer codes. In addition, by using entanglement quantum stabilizer codes can be construct from classical linear codes that do not satisfy the dual-containing constraint. We show that it is possible to construct both additive and nonadditive quantum codes using the codeword stabilized quantum code framework. Nonadditive codes may offer improved performance over the more common stabilizer codes. Like other entanglement-assisted codes, the encoding procedure acts only on the qubits on Alice's side, and only these qubits are assumed to pass through the channel. However, errors in the codeword stabilized quantum code framework give rise to effective Z errors on Bob's side. We use this scheme to construct entanglement-assisted nonadditive quantum codes, in particular, ((5,16,2;1)) and ((7,4,5;4)) codes.

Shin, Jeonghwan; Heo, Jun; Brun, Todd A. [School of Electrical Engineering, Korea University, Seoul (Korea, Republic of); Communication Sciences Institute, University of Southern California, Los Angeles, California 90089 (United States)

2011-12-15T23:59:59.000Z

205

Thermal Stability Of Formohydroxamic Acid  

SciTech Connect (OSTI)

The thermal stability of formohydroxamic acid (FHA) was evaluated to address the potential for exothermic decomposition during storage and its use in the uranium extraction process. Accelerating rate calorimetry showed rapid decomposition at a temperature above 65 {degree}?C; although, the rate of pressure rise was greater than two orders of magnitude less than the lower bound for materials which have no explosive properties with respect to transportation. FHA solutions in water and nitric acid did not reach runaway conditions until 150 {degree}?C. Analysis by differential scanning calorimetry showed that FHA melted at 67 {degree}?C and thermally decomposed at 90 {degree}?C with an enthalpy of -1924 J/g. The energics of the FHA thermal decomposition are comparable to those measured for aqueous solutions of hydroxylamine nitrate. Solid FHA should be stored in a location where the temperature does not exceed 20-25 {degree}?C. As a best practice, the solid material should be stored in a climate-controlled environment such as a refrigerator or freezer. FHA solutions in water are not susceptible to degradation by acid hydrolysis and are the preferred way to handle FHA prior to use.

Fondeur, F. F.; Rudisill, T. S.

2011-10-21T23:59:59.000Z

206

Pipe crawler with stabilizing midsection  

DOE Patents [OSTI]

A pipe crawler is described having a midsection that provides the stability and flexibility to allow the pipe crawler to negotiate curved and uneven segments of piping while traveling through piping systems. The pipe crawler comprises a front leg assembly, a rear leg assembly, a midsection with a gimbal at each end for connecting the midsection to the front and rear leg assemblies in a flexible manner, and an air cylinder for changing the distance between the front and rear leg assemblies. The pipe crawler moves in ''inch worm'' fashion with the front and rear leg assemblies alternating between an extended and a retracted position as the air cylinder moves the retracted leg assembly forward. The midsection has a plurality of legs extending radially for holding the midsection within a maximum displacement from the piping axis so that the gimbals are not pivoted to extreme angles where they might lock up or seize. When the midsection is displaced sufficiently, its legs with wheels on each end engage the interior surface of the piping and prevent further displacement. Using two gimbals divides the angle between the planes defined by the front and rear leg assemblies which also helps to prevent excessive gimbal pivoting. 5 figures.

Zollinger, W.T.; Treanor, R.C.

1994-12-27T23:59:59.000Z

207

Pipe crawler with stabilizing midsection  

DOE Patents [OSTI]

A pipe crawler having a midsection that provides the stability and flexibty to allow the pipe crawler to negotiate curved and uneven segments of piping while traveling through piping systems. The pipe crawler comprises a front leg assembly, a rear leg assembly, a midsection with a gimbal at each end for connecting the midsection to the front and rear leg assemblies in a flexible manner, and an air cylinder for changing the distance between the front and rear leg assemblies. The pipe crawler moves in "inch worm" fashion with the front and rear leg assemblies alternating between an extended and a retracted position as the air cylinder moves the retracted leg assembly forward. The midsection has a plurality of legs extending radially for holding the midsection within a maximum displacement from the piping axis so that the gimbals are not pivoted to extreme angles where they might lock up or seize. When the midsection is displaced sufficiently, its legs with wheels on each end engage the interior surface of the piping and prevent further displacement. Using two gimbals divides the angle between the planes defined by the front and rear leg assemblies which also helps to prevent excessive gimbal pivoting.

Zollinger, William T. (Martinez, GA); Treanor, Richard C. (Augusta, GA)

1994-01-01T23:59:59.000Z

208

Plasma-based EUV light source  

DOE Patents [OSTI]

Various mechanisms are provided relating to plasma-based light source that may be used for lithography as well as other applications. For example, a device is disclosed for producing extreme ultraviolet (EUV) light based on a sheared plasma flow. The device can produce a plasma pinch that can last several orders of magnitude longer than what is typically sustained in a Z-pinch, thus enabling the device to provide more power output than what has been hitherto predicted in theory or attained in practice. Such power output may be used in a lithography system for manufacturing integrated circuits, enabling the use of EUV wavelengths on the order of about 13.5 nm. Lastly, the process of manufacturing such a plasma pinch is discussed, where the process includes providing a sheared flow of plasma in order to stabilize it for long periods of time.

Shumlak, Uri (Seattle, WA); Golingo, Raymond (Seattle, WA); Nelson, Brian A. (Mountlake Terrace, WA)

2010-11-02T23:59:59.000Z

209

Calibrated vapor generator source  

DOE Patents [OSTI]

A portable vapor generator is disclosed that can provide a controlled source of chemical vapors, such as, narcotic or explosive vapors. This source can be used to test and calibrate various types of vapor detection systems by providing a known amount of vapors to the system. The vapor generator is calibrated using a reference ion mobility spectrometer. A method of providing this vapor is described, as follows: explosive or narcotic is deposited on quartz wool, placed in a chamber that can be heated or cooled (depending on the vapor pressure of the material) to control the concentration of vapors in the reservoir. A controlled flow of air is pulsed over the quartz wool releasing a preset quantity of vapors at the outlet. 10 figs.

Davies, J.P.; Larson, R.A.; Goodrich, L.D.; Hall, H.J.; Stoddard, B.D.; Davis, S.G.; Kaser, T.G.; Conrad, F.J.

1995-09-26T23:59:59.000Z

210

Voltage controlled current source  

DOE Patents [OSTI]

A seven decade, voltage controlled current source is described for use in testing intermediate range nuclear instruments that covers the entire test current range of from 10 picoamperes to 100 microamperes. High accuracy is obtained throughout the entire seven decades of output current with circuitry that includes a coordinated switching scheme responsive to the input signal from a hybrid computer to control the input voltage to an antilog amplifier, and to selectively connect a resistance to the antilog amplifier output to provide a continuous output current source as a function of a preset range of input voltage. An operator controlled switch provides current adjustment for operation in either a real-time simulation test mode or a time response test mode.

Casne, Gregory M. (Pittsburgh, PA)

1992-01-01T23:59:59.000Z

211

Evaluated teletherapy source library  

DOE Patents [OSTI]

The Evaluated Teletherapy Source Library (ETSL) is a system of hardware and software that provides for maintenance of a library of useful phase space descriptions (PSDs) of teletherapy sources used in radiation therapy for cancer treatment. The PSDs are designed to be used by PEREGRINE, the all-particle Monte Carlo dose calculation system. ETSL also stores other relevant information such as monitor unit factors (MUFs) for use with the PSDs, results of PEREGRINE calculations using the PSDs, clinical calibration measurements, and geometry descriptions sufficient for calculational purposes. Not all of this information is directly needed by PEREGRINE. It also is capable of acting as a repository for the Monte Carlo simulation history files from which the generic PSDs are derived.

Cox, Lawrence J. (Los Alamos, NM); Schach Von Wittenau, Alexis E. (Livermore, CA)

2000-01-01T23:59:59.000Z

212

The European Spallation Source  

SciTech Connect (OSTI)

The European Spallation Source (ESS) is a 5 MW, 2.5 GeV long pulse proton linac, to be built and commissioned in Lund, Sweden. The Accelerator Design Update (ADU) project phase is under way, to be completed at the end of 2012 by the delivery of a Technical Design Report. Improvements to the 2003 ESS design will be summarised, and the latest design activities will be presented.

Peggs, S; Eshraqi, M; Hahn, H; Jansson, A; Lindroos, M; Ponton, A; Rathsman, K; Trahern, G; Bousso, S; Calaga, R; Devanz, G; Duperrier, R D; Eguia, J; Gammino, S; Moller, S P; Oyon, C; Ruber, R.J.M.Y.

2011-03-01T23:59:59.000Z

213

Capillary discharge source  

DOE Patents [OSTI]

Debris generation from an EUV electric discharge plasma source device can be significantly reduced or essentially eliminated by encasing the electrodes with dielectric or electrically insulating material so that the electrodes are shielded from the plasma, and additionally by providing a path for the radiation to exit wherein the electrodes are not exposed to the area where the radiation is collected. The device includes: (a) a body, which is made of an electrically insulating material, that defines a capillary bore that has a proximal end and a distal end and that defines at least one radiation exit; (b) a first electrode that defines a first channel that has a first inlet end that is connected to a source of gas and a first outlet end that is in communication with the capillary bore, wherein the first electrode is positioned at the distal end of the capillary bore; (c) a second electrode that defines a second channel that has a second inlet end that is in communication with the capillary bore and an outlet end, wherein the second electrode is positioned at the proximal end of the capillary bore; and (d) a source of electric potential that is connected across the first and second electrodes, wherein radiation generated within the capillary bore is emitted through the at least one radiation exit and wherein the first electrode and second electrode are shielded from the emitted radiation.

Bender, III, Howard Albert

2003-11-25T23:59:59.000Z

214

Process for stabilization of coal liquid fractions  

DOE Patents [OSTI]

Coal liquid fractions to be used as fuels are stabilized against gum formation and viscosity increases during storage, permitting the fuel to be burned as is, without further expensive treatments to remove gums or gum-forming materials. Stabilization is accomplished by addition of cyclohexanol or other simple inexpensive secondary and tertiary alcohols, secondary and tertiary amines, and ketones to such coal liquids at levels of 5-25% by weight with respect to the coal liquid being treated. Cyclohexanol is a particularly effective and cost-efficient stabilizer. Other stabilizers are isopropanol, diphenylmethanol, tertiary butanol, dipropylamine, triethylamine, diphenylamine, ethylmethylketone, cyclohexanone, methylphenylketone, and benzophenone. Experimental data indicate that stabilization is achieved by breaking hydrogen bonds between phenols in the coal liquid, thereby preventing or retarding oxidative coupling. In addition, it has been found that coal liquid fractions stabilized according to the invention can be mixed with petroleum-derived liquid fuels to produce mixtures in which gum deposition is prevented or reduced relative to similar mixtures not containing stabilizer.

Davies, Geoffrey (Boston, MA); El-Toukhy, Ahmed (Alexandria, EG)

1987-01-01T23:59:59.000Z

215

Long life lithium batteries with stabilized electrodes  

DOE Patents [OSTI]

The present invention relates to non-aqueous electrolytes having electrode stabilizing additives, stabilized electrodes, and electrochemical devices containing the same. Thus the present invention provides electrolytes containing an alkali metal salt, a polar aprotic solvent, and an electrode stabilizing additive. In some embodiments the additives include a substituted or unsubstituted cyclic or spirocyclic hydrocarbon containing at least one oxygen atom and at least one alkenyl or alkynyl group. When used in electrochemical devices with, e.g., lithium manganese oxide spinel electrodes or olivine or carbon-coated olivine electrodes, the new electrolytes provide batteries with improved calendar and cycle life.

Amine, Khalil (Downers Grove, IL); Liu, Jun (Naperville, IL); Vissers, Donald R. (Naperville, IL); Lu, Wenquan (Darien, IL)

2009-03-24T23:59:59.000Z

216

SYNCHROTRON RADIATION SOURCES  

SciTech Connect (OSTI)

Synchrotron radiation is a very bright, broadband, polarized, pulsed source of light extending from the infrared to the x-ray region. It is an extremely important source of Vacuum Ultraviolet radiation. Brightness is defined as flux per unit area per unit solid angle and is normally a more important quantity than flux alone particularly in throughput limited applications which include those in which monochromators are used. It is well known from classical theory of electricity and magnetism that accelerating charges emit electromagnetic radiation. In the case of synchrotron radiation, relativistic electrons are accelerated in a circular orbit and emit electromagnetic radiation in a broad spectral range. The visible portion of this spectrum was first observed on April 24, 1947 at General Electric's Schenectady facility by Floyd Haber, a machinist working with the synchrotron team, although the first theoretical predictions were by Lienard in the latter part of the 1800's. An excellent early history with references was presented by Blewett and a history covering the development of the utilization of synchrotron radiation was presented by Hartman. Synchrotron radiation covers the entire electromagnetic spectrum from the infrared region through the visible, ultraviolet, and into the x-ray region up to energies of many 10's of kilovolts. If the charged particles are of low mass, such as electrons, and if they are traveling relativistically, the emitted radiation is very intense and highly collimated, with opening angles of the order of 1 milliradian. In electron storage rings there are three possible sources of synchrotron radiation; dipole (bending) magnets; wigglers, which act like a sequence of bending magnets with alternating polarities; and undulators, which are also multi-period alternating magnet systems but in which the beam deflections are small resulting in coherent interference of the emitted light.

HULBERT,S.L.; WILLIAMS,G.P.

1998-07-01T23:59:59.000Z

217

Compact ion accelerator source  

DOE Patents [OSTI]

An ion source includes a conductive substrate, the substrate including a plurality of conductive nanostructures with free-standing tips formed on the substrate. A conductive catalytic coating is formed on the nanostructures and substrate for dissociation of a molecular species into an atomic species, the molecular species being brought in contact with the catalytic coating. A target electrode placed apart from the substrate, the target electrode being biased relative to the substrate with a first bias voltage to ionize the atomic species in proximity to the free-standing tips and attract the ionized atomic species from the substrate in the direction of the target electrode.

Schenkel, Thomas; Persaud, Arun; Kapadia, Rehan; Javey, Ali

2014-04-29T23:59:59.000Z

218

The European Spallation Source  

SciTech Connect (OSTI)

In 2003 the joint European effort to design a European Spallation Source (ESS) resulted in a set of reports, and in May 2009 Lund was agreed to be the ESS site. The ESS Scandinavia office has since then worked on setting all the necessary legal and organizational matters in place so that the Design Update and construction can be started in January 2011, in collaboration with European partners. The Design Update phase is expected to end in 2012, to be followed by a construction phase, with first neutrons expected in 2018-2019.

Lindroos M.; Calaga R.; Bousson S.; Danared H.; Devanz G. et al

2011-04-20T23:59:59.000Z

219

Photon Source Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006 TheStevenAdministrationPhotometric Variations asPhoton Source

220

Source Selection Guide  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter Efficiency Under High-Current Operation Source

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Source Selection Guide  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter Efficiency Under High-Current Operation Source

222

SOURCE SELECTION INFORMATION -  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalancedDepartmentRestrictions onSBBiodiesel | DepartmentSLACofof98-02|10,SOURCE

223

Photon Source Parameters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design Passive SolarCenter |Photoinduced electronPhoton Source

224

Sources of tritium  

SciTech Connect (OSTI)

A review of tritium sources is presented. The tritium production and release rates are discussed for light water reactors (LWRs), heavy water reactors (HWRs), high temperature gas cooled reactors (HTGRs), liquid metal fast breeder reactors (LMFBRs), and molten salt breeder reactors (MSBRs). In addition, release rates are discussed for tritium production facilities, fuel reprocessing plants, weapons detonations, and fusion reactors. A discussion of the chemical form of the release is included. The energy producing facilities are ranked in order of increasing tritium production and release. The ranking is: HTGRs, LWRs, LMFBRs, MSBRs, and HWRs. The majority of tritium has been released in the form of tritiated water.

Phillips, J.E.; Easterly, C.E.

1980-12-01T23:59:59.000Z

225

Novel Compounds for Enhancing Electrolyte Stability and Safety...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Compounds for Enhancing Electrolyte Stability and Safety of Lithium-ion Cells Novel Compounds for Enhancing Electrolyte Stability and Safety of Lithium-ion Cells 2010 DOE Vehicle...

226

Molecular Structure and Stability of Dissolved Lithium Polysulfide...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Stability of Dissolved Lithium Polysulfide Species. Molecular Structure and Stability of Dissolved Lithium Polysulfide Species. Abstract: Ability to predict the solubility and...

227

Surface and Structural Stabilities of Carbon Additives in High...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Structural Stabilities of Carbon Additives in High Voltage Lithium Ion Batteries. Surface and Structural Stabilities of Carbon Additives in High Voltage Lithium Ion Batteries....

228

Grain growth and phase stability of nanocrystalline cubic zirconia...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of nanocrystalline cubic zirconia under ion irradiation. Abstract: Grain growth, oxygen stoichiometry and phase stability of nanostructurally-stabilized zirconia (NSZ) in...

229

attitude stability system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

such as Gravity Gradient stabilization, (more) Rawashdeh, Samir Ahmed 2010-01-01 3 Design of Attitude Stability System for Prolate Dual-spin Satellite in Its Inclined...

230

Towards Understanding the Poor Thermal Stability of V5+ Electrolyte...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the Poor Thermal Stability of V5+ Electrolyte Solution in Vanadium Redox Flow Batteries. Towards Understanding the Poor Thermal Stability of V5+ Electrolyte Solution in...

231

Enhanced Activity and Stability of Pt catalysts on Functionalized...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Enhanced Activity and Stability of Pt catalysts on Functionalized Graphene Sheets for Electrocatalytic Oxygen Reduction . Enhanced Activity and Stability of Pt catalysts on...

232

Stability Of Nanoclusters In 14YWT Oxide Dispersion Strengthened...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Stability Of Nanoclusters In 14YWT Oxide Dispersion Strengthened Steel Under Heavy Ion-irradiation By Atom Probe Tomography. Stability Of Nanoclusters In 14YWT Oxide Dispersion...

233

Scale-Up of Magnesium Production by Fully Stabilized Zirconia...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Scale-Up of Magnesium Production by Fully Stabilized Zirconia Electrolysis Scale-Up of Magnesium Production by Fully Stabilized Zirconia Electrolysis 2012 DOE Hydrogen and Fuel...

234

Density Functional Study of the Structure, Stability and Oxygen...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Study of the Structure, Stability and Oxygen Reduction Activity of Ultrathin Platinum Nanowires. Density Functional Study of the Structure, Stability and Oxygen Reduction Activity...

235

Radiation Stability of Nanoclusters in Nano-structured Oxide...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Stability of Nanoclusters in Nano-structured Oxide Dispersion Strengthened (ODS) Steels. Radiation Stability of Nanoclusters in Nano-structured Oxide Dispersion Strengthened (ODS)...

236

Quality, Stability, Performance, and Emission Impacts of Biodiesel...  

Broader source: Energy.gov (indexed) [DOE]

Quality, Stability, Performance, and Emission Impacts of Biodiesel Blends Quality, Stability, Performance, and Emission Impacts of Biodiesel Blends Presentation from the U.S. DOE...

237

Processes that influence biodiversity, ecosystem functioning, and stability in grasslands.  

E-Print Network [OSTI]

??Biodiversity is rapidly declining worldwide, and this may lead to subsequent declines in ecosystem functioning and stability. Here I consider whether: (i) stabilizing species interactions,Ö (more)

Isbell, Forest Isaac

2010-01-01T23:59:59.000Z

238

Processes that influence biodiversity, ecosystem functioning, and stability in grasslands.  

E-Print Network [OSTI]

?? Biodiversity is rapidly declining worldwide, and this may lead to subsequent declines in ecosystem functioning and stability. Here I consider whether: (i) stabilizing speciesÖ (more)

Isbell, Forest Isaac

2010-01-01T23:59:59.000Z

239

Thermohaline circulation stability : a box model  

E-Print Network [OSTI]

A thorough analysis of the stability of uncoupled and coupled versions of an inter-hemispheric 3-box model of Thermohaline Circulation (THC) is presented. The model consists of a northern high latitudes box, a tropical ...

Lucarini, Valerio

2003-01-01T23:59:59.000Z

240

What does stabilizing greenhouse gas concentrations mean?  

E-Print Network [OSTI]

The MIT Emissions Prediction and Policy Analysis (EPPA) model is applied to an exploration of the national emissions obligations that would be required to stabilize atmospheric CO2 concentrations at levels now under active ...

Jacoby, Henry D.; Schmalensee, Richard.; Reiner, David M.

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

LED Color Stability: 10 Important Questions  

Broader source: Energy.gov [DOE]

This April 15, 2014 webinar examined the causes of color shift, and took a look at existing metrics used to describe color shift/color stability in LED lighting. The lumen maintenance lifetime of...

242

Entanglement-assisted codeword stabilized quantum codes  

E-Print Network [OSTI]

Entangled qubit can increase the capacity of quantum error correcting codes based on stabilizer codes. In addition, by using entanglement quantum stabilizer codes can be construct from classical linear codes that do not satisfy the dual-containing constraint. We show that it is possible to construct both additive and non-additive quantum codes using the codeword stabilized quantum code framework. Nonadditive codes may offer improved performance over the more common sta- bilizer codes. Like other entanglement-assisted codes, the encoding procedure acts only the qubits on Alice's side, and only these qubits are assumed to pass through the channel. However, errors the codeword stabilized quantum code framework gives rise to effective Z errors on Bob side. We use this scheme to construct new entanglement-assisted non-additive quantum codes, in particular, ((5,16,2;1)) and ((7,4,5;4)) codes.

Jeonghwan Shin; Jun Heo; Todd A. Brun

2011-09-15T23:59:59.000Z

243

Stability Index of Interaction forms Joseph Abdou  

E-Print Network [OSTI]

Stability Index of Interaction forms Joseph Abdou December 15, 2008 Abstract An interaction form, 106-112 boulevard de l'H^opital 75647 Paris Cedex 13 - France; email: abdou@univ-paris1.fr 1 halshs

Paris-Sud XI, Université de

244

Stability estimates for an inverse source problem of Helmholtz's equation from a single Cauchy  

E-Print Network [OSTI]

/MEG) problems [9, 21, 28], pollution in the envi- ronment [15, 24], photo- and thermo-acoustic tomography [4, 31

El Hajj, Ahmad

245

Journal of Power Sources xxx (2005) xxxxxx Vehicle-to-grid power implementation: From stabilizing the  

E-Print Network [OSTI]

December 2004 Abstract Vehicle-to-grid power (V2G) uses electric-drive vehicles (battery, fuel cell fleet with the electric power system. The vehicle fleet has 20 times the power capacity, less than one for electric-drive vehicles used to provide power for several power markets. This arti- cle quantitatively

Firestone, Jeremy

246

Dietary lipid source and vitamin e influence on chicken meat quality and lipid oxidation stability  

E-Print Network [OSTI]

, flaxseed, or menhaden oil. Each lipid diet was supplemented with either a control (33 or 42 mg/kg) or a supranutritional level (200-400 or 200 mg/kg) of vitamin E. Breast and thigh meat, or skin, were processed, packaged, and refrigerated as raw meat...

Narciso-Gaytan, Carlos

2009-05-15T23:59:59.000Z

247

DNAPL source control by reductive dechlorination with iron-based degradative solidification/stabilization  

E-Print Network [OSTI]

by compounds that are formed by reaction of ferrous iron with components of Portland cement or with defined chemicals (FeCl3 + Ca(OH)2). These dechlorinating agents can effectively degrade chlorinated hydrocarbons (PCE, TCE, and 1,1,1-TCA) that are dissolved...

Do, Si Hyun

2009-05-15T23:59:59.000Z

248

Stabilizing windings for tilting and shifting modes  

DOE Patents [OSTI]

This invention relates to passive conducting loops for stabilizing a plasma ring against unstable tilting and/or shifting modes. To this end, for example, plasma ring in a spheromak is stabilized by a set of four figure-8 shaped loops having one pair on one side of the plasma and one pair on the other side with each pair comprising two loops whose axes are transverse to each other.

Jardin, Stephen C. (Princeton, NJ); Christensen, Uffe R. (Princeton, NJ)

1984-01-01T23:59:59.000Z

249

A model study of articulated mat stability  

E-Print Network [OSTI]

characteristics of. model articulated mat revetrrient svith respect to different revetmert slope con- ditions. In this experirrent three diFierent slope permeabilities were investigated by layering geotextile filter on the revetment frame. The stability... EXPERIMENTAL PROCEDURE 12 18 A. Geotextile filter B. Stability experiment V WAVE RUNUP 18 21 33 VI VII VIII WAVE RUNDOWN UPLIFTING FORCE SLIDE-UP FORCE 44 IX SLIDE-DOWN FORCE 77 SUMMARY AND CONCLUSION REFERENCES . APPENDIX A EXPERIMENTAL...

Sasaki, Tetsu

1990-01-01T23:59:59.000Z

250

Engineering report (conceptual design) PFP solution stabilization  

SciTech Connect (OSTI)

This Engineering Report (Conceptual Design) addresses remediation of the plutonium-bearing solutions currently in inventory at the Plutonium Finishing Plant (PFP). The recommendation from the Environmental Impact Statement (EIS) is that the solutions be treated thermally and stabilized as a solid for long term storage. For solutions which are not discardable, the baseline plan is to utilize a denitration process to stabilize the solutions prior to packaging for storage.

Witt, J.B.

1997-07-17T23:59:59.000Z

251

Electrostatic wire stabilizing a charged particle beam  

DOE Patents [OSTI]

In combination with a charged particle beam generator and accelerator, apparatus and method are provided for stabilizing a beam of electrically charged particles. A guiding means, disposed within the particle beam, has an electric charge induced upon it by the charged particle beam. Because the sign of the electric charge on the guiding means and the sign of the particle beam are opposite, the particles are attracted toward and cluster around the guiding means to thereby stabilize the particle beam as it travels.

Prono, D.S.; Caporaso, G.J.; Briggs, R.J.

1983-03-21T23:59:59.000Z

252

Stabilized fuel with silica support structure  

SciTech Connect (OSTI)

This report describes a stabilized fuel which is supported by a silica support structure. The silica support structure provides a low density, high porosity vehicle for safely carrying hydrocarbon fuels. The silica support structure for hydrocarbon fuel does not produce toxic material residues on combustion which would pose environmentally sensitive disposal problems. The silica stabilized fuel composition is useful as a low temperature, continuous burning fire starter for wood or charcoal.

Poco, J.F.; Hrubesh, L.W.

1991-12-31T23:59:59.000Z

253

Silicate stabilization studies in propylene glycol  

SciTech Connect (OSTI)

In most North American and many European coolant formulations, the corrosion inhibition of heat-rejecting aluminum surfaces is provided by alkali metal silicates. But, their tendency towards polymerization, leading to gelation and/or precipitation, can reduce the effectiveness of a coolant. This paper presents the results of experiments which illustrate formulation-dependent behavior of inorganic silicate in propylene glycol compositions. Specific examples of the effects of glycol matrix, stabilizer type, and hard water on silicate stabilization are provided.

Schwartz, S.A. [ARCO Chemical Co., Newtown Square, PA (United States)

1999-08-01T23:59:59.000Z

254

Federal Funding Sources of Information Sources for Automatic Funding Notices  

E-Print Network [OSTI]

;Federal Funding Sources of Information r Grant Programs & Deadlines q World Health Organization - GrantFederal Funding Sources of Information Sources for Automatic Funding Notices q Catalogue of Federal Domestic Assistance q Grants.Gov q FedBizOpps q The Foundation Center r RFP Bulletin r Philanthropy News

255

Ideal MHD Stability of ITER Steady State Scenarios with ITBs  

SciTech Connect (OSTI)

One of ITER goals is to demonstrate feasibility of continuous operations using non-inductive current drive. Two main candidates have been identified for advanced operations: the long duration, high neutron fluency hybrid scenario and the steady state scenario, both operating at a plasma current lower than the reference ELMy scenario [1][2] to minimize the required current drive. The steady state scenario targets plasmas with current 7-10 MA in the flat-top, 50% of which will be provided by the self-generated, pressure-driven bootstrap current. It has been estimated that, in order to obtain a fusion gain Q > 5 at a current of 9 MA, it should be ?N > 2.5 and H > 1.5 [3]. This implies the presence of an Internal Transport Barrier (ITB). This work discusses how the stability of steady state scenarios with ITBs is affected by the external heating sources and by perturbations of the equilibrium profiles.

F.M. Poli, C.E. Kessel, S. Jardin, J. Manickam, M. Chance, J. Chen

2011-07-27T23:59:59.000Z

256

Apparatus and method for oxidation and stabilization of polymeric materials  

DOE Patents [OSTI]

An apparatus for treating polymeric materials comprises a treatment chamber adapted to maintain a selected atmosphere; a means for supporting the polymeric material within the chamber; and, a source of plasma-derived gas containing at least one reactive oxidative species whereby the polymer is stabilized and cross linked through exposure to the oxidative species in the chamber at a selected temperature. The polymer may be directly exposed to the plasma, or alternatively, the plasma may be established in a separate volume from which the reactive species may be extracted and introduced into the vicinity of the polymer. The apparatus may be configured for either batch-type or continuous-type processing. The apparatus and method are especially useful for preparing polymer fibers, particularly PAN fibers, for later carbonization treatments.

Paulauskas, Felix L. (Knoxville, TN) [Knoxville, TN; White, Terry L. (Knoxville, TN) [Knoxville, TN; Sherman, Daniel M. (Knoxville, TN) [Knoxville, TN

2009-05-19T23:59:59.000Z

257

Apparatus and method for oxidation and stabilization of polymeric materials  

DOE Patents [OSTI]

An apparatus for treating polymeric materials comprises a treatment chamber adapted to maintain a selected atmosphere; a means for supporting the polymeric material within the chamber; and, a source of plasma-derived gas containing at least one reactive oxidative species whereby the polymer is stabilized and cross linked through exposure to the oxidative species in the chamber at a selected temperature. The polymer may be directly exposed to the plasma, or alternatively, the plasma may be established in a separate volume from which the reactive species may be extracted and introduced into the vicinity of the polymer. The apparatus may be configured for either batch-type or continuous-type processing. The apparatus and method are especially useful for preparing polymer fibers, particularly PAN fibers, for later carbonization treatments.

Paulauskas, Felix L. (Knoxville, TN) [Knoxville, TN; White, Terry L. (Knoxville, TN) [Knoxville, TN; Sherman, Daniel M. (Knoxville, TN) [Knoxville, TN

2010-08-31T23:59:59.000Z

258

Crude oil and finished fuel storage stability: An annotated review  

SciTech Connect (OSTI)

A state-of-the-art review and assessment of storage effects on crude oil and product quality was undertaken through a literature search by computer accessing several data base sources. Pertinent citations from that literature search are tabulated for the years 1980 to the present. This 1990 revision supplements earlier reviews by Brinkman and others which covered stability publications through 1979 and an update in 1983 by Goetzinger and others that covered the period 1952--1982. For purposes of organization, citations are listed in the current revision chronologically starting with the earliest 1980 publications. The citations have also been divided according to primary subject matter. Consequently 11 sections appear including: alternate fuels, gasoline, distillate fuel, jet fuel, residual fuel, crude oil, biodegradation, analyses, reaction mechanisms, containment, and handling and storage. Each section contains a brief narrative followed by all the citations for that category.

Whisman, M.L.; Anderson, R.P.; Woodward, P.W.; Giles, H.N.

1991-01-01T23:59:59.000Z

259

Sundman Stability of Natural Planet Satellites  

E-Print Network [OSTI]

The stability of the motion of the planet satellites is considered in the model of the general three-body problem (Sun-planet-satellite). "Sundman surfaces" are constructed, by means of which the concept "Sundman stability" is formulated. The comparison of the Sundman stability with the results of Golubev's c2h method and with the Hill's classical stability in the restricted three-body problem is performed. The constructed Sundman stability regions in the plane of the parameters "energy - moment of momentum" coincide with the analogous regions obtained by Golubev's method, with the value (c2h)cr. The construction of the Sundman surfaces in the three-dimensional space of the specially selected coordinates xyR is carried out by means of the exact Sundman inequality in the general three-body problem. The determination of the singular points of surfaces, the regions of the possible motion and Sundman stability analysis are implemented. It is shown that the singular points of the Sundman surfaces in the coordinate...

Lukyanov, L G

2012-01-01T23:59:59.000Z

260

Compton backscattered collimated x-ray source  

DOE Patents [OSTI]

A high-intensity, inexpensive and collimated x-ray source is disclosed for applications such as x-ray lithography is disclosed. An intense pulse from a high power laser, stored in a high-finesse resonator, repetitively collides nearly head-on with and Compton backscatters off a bunched electron beam, having relatively low energy and circulating in a compact storage ring. Both the laser and the electron beams are tightly focused and matched at the interaction region inside the optical resonator. The laser-electron interaction not only gives rise to x-rays at the desired wavelength, but also cools and stabilizes the electrons against intrabeam scattering and Coulomb repulsion with each other in the storage ring. This cooling provides a compact, intense bunch of electrons suitable for many applications. In particular, a sufficient amount of x-rays can be generated by this device to make it an excellent and flexible Compton backscattered x-ray (CBX) source for high throughput x-ray lithography and many other applications. 4 figs.

Ruth, R.D.; Huang, Z.

1998-10-20T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Compton backscattered collmated X-ray source  

DOE Patents [OSTI]

A high-intensity, inexpensive and collimated x-ray source for applications such as x-ray lithography is disclosed. An intense pulse from a high power laser, stored in a high-finesse resonator, repetitively collides nearly head-on with and Compton backscatters off a bunched electron beam, having relatively low energy and circulating in a compact storage ring. Both the laser and the electron beams are tightly focused and matched at the interaction region inside the optical resonator. The laser-electron interaction not only gives rise to x-rays at the desired wavelength, but also cools and stabilizes the electrons against intrabeam scattering and Coulomb repulsion with each other in the storage ring. This cooling provides a compact, intense bunch of electrons suitable for many applications. In particular, a sufficient amount of x-rays can be generated by this device to make it an excellent and flexible Compton backscattered x-ray (CBX) source for high throughput x-ray lithography and many other applications.

Ruth, Ronald D. (Woodside, CA); Huang, Zhirong (Stanford, CA)

2000-01-01T23:59:59.000Z

262

Compton backscattered collimated x-ray source  

DOE Patents [OSTI]

A high-intensity, inexpensive and collimated x-ray source for applications such as x-ray lithography is disclosed. An intense pulse from a high power laser, stored in a high-finesse resonator, repetitively collides nearly head-on with and Compton backscatters off a bunched electron beam, having relatively low energy and circulating in a compact storage ring. Both the laser and the electron beams are tightly focused and matched at the interaction region inside the optical resonator. The laser-electron interaction not only gives rise to x-rays at the desired wavelength, but also cools and stabilizes the electrons against intrabeam scattering and Coulomb repulsion with each other in the storage ring. This cooling provides a compact, intense bunch of electrons suitable for many applications. In particular, a sufficient amount of x-rays can be generated by this device to make it an excellent and flexible Compton backscattered x-ray (CBX) source for high throughput x-ray lithography and many other applications.

Ruth, Ronald D. (Woodside, CA); Huang, Zhirong (Stanford, CA)

1998-01-01T23:59:59.000Z

263

Progress in Creating Stabilized Gas Layers in Flowing Liquid Mercury  

SciTech Connect (OSTI)

The Spallation Neutron Source (SNS) facility in Oak Ridge, Tennessee uses a liquid mercury target that is bombarded with protons to produce a pulsed neutron beam for materials research and development. In order to mitigate expected cavitation damage erosion (CDE) of the containment vessel, a two-phase flow arrangement of the target has been proposed and was earlier proven to be effective in significantly reducing CDE in non-prototypical target bodies. This arrangement involves covering the beam "window", through which the high-energy proton beam passes, with a protective layer of gas. The difficulty lies in establishing a stable gas/liquid interface that is oriented vertically with the window and holds up to the strong buoyancy force and the turbulent mercury flow field. Three approaches to establishing the gas wall have been investigated in isothermal mercury/gas testing on a prototypical geometry and flow: (1) free gas layer approach, (2) porous wall approach, and (3) surface-modified approach. The latter two of these approaches show success in that a stabilized gas layer is produced. Both of these successful approaches capitalize on the high surface energy of liquid mercury by increasing the surface area of the solid wall, thus increasing gas hold up at the wall. In this paper, a summary of these experiments and findings is presented as well as a description of the path forward toward incorporating the stabilized gas layer approach into a feasible gas/mercury SNS target design.

Wendel, Mark W [ORNL; Felde, David K [ORNL; Riemer, Bernie [ORNL; Abdou, Ashraf A [ORNL; D'Urso, Brian R [ORNL; West, David L [ORNL

2009-01-01T23:59:59.000Z

264

High Performance Computing for Stability Problems - Applications to Hydrodynamic Stability and Neutron Transport Criticality.  

E-Print Network [OSTI]

??In this work we examine two kinds of applications in terms of stability and perform numerical evaluations and benchmarks on parallel platforms. We consider theÖ (more)

Subramanian, Chandramowli

2011-01-01T23:59:59.000Z

265

Examination of shale-derived polar compounds and their effects on diesel fuel stability  

SciTech Connect (OSTI)

This study is an examination of the effects of adding shale-derived polar fractions to a stable shale base fuel. Polar compounds have been isolated from two different shale sources by mild acid extraction followed by adsorption on silica gel. The identification of the extract components by combined gas chromatography - mass spectrometry, as well as the results of accelerated storage stability tests, are described in this paper.

Cooney, J.V.; Beal, E.J.; Hazlett, R.N.

1984-01-01T23:59:59.000Z

266

Annual Energy Outlook 2012  

Gasoline and Diesel Fuel Update (EIA)

36 Reference case Energy Information Administration Annual Energy Outlook 2012 6 Table A3. Energy prices by sector and source (2010 dollars per million Btu, unless otherwise...

267

Advanced Photon Source Upgrade Project  

ScienceCinema (OSTI)

Upgrade to Advanced Photon Source announced by Department Of Energy. Read more: http://go.usa.gov/ivZ

Mitchell, John; Gibson, Murray; Young, Linda; Joachimiak, Andrzej

2013-04-19T23:59:59.000Z

268

Investigation of Thermal Stability and Delivery of Cobalt Amidinates and Novel Cobalt Formamidinates for Metallic Cobalt by ALD/CVD  

E-Print Network [OSTI]

Investigation of Thermal Stability and Delivery of Cobalt Amidinates and Novel Cobalt Si nanowire devices[2]. The Co precursor selection for CVD and ALD is primarily based on good thermal Liquid Injection process (DLI). ¬ĺ For CVD and ALD of cobalt, various sources such as Co2(CO)8, (tert

269

Nanosheet-structured LiV3O8 with high capacity and excellent stability for high energy lithium batteries  

E-Print Network [OSTI]

for high-energy lithium battery applications. 1. Introduction Energy storage and conversion have sources.1­6 Lithium-ion batteries are considered to be the most promising energy-storage systemsNanosheet-structured LiV3O8 with high capacity and excellent stability for high energy lithium

Cao, Guozhong

270

Infrared source test  

SciTech Connect (OSTI)

The purpose of the Infrared Source Test (IRST) is to demonstrate the ability to track a ground target with an infrared sensor from an airplane. The system is being developed within the Advance Technology Program`s Theater Missile Defense/Unmanned Aerial Vehicle (UAV) section. The IRST payload consists of an Amber Radiance 1 infrared camera system, a computer, a gimbaled mirror, and a hard disk. The processor is a custom R3000 CPU board made by Risq Modular Systems, Inc. for LLNL. The board has ethernet, SCSI, parallel I/O, and serial ports, a DMA channel, a video (frame buffer) interface, and eight MBytes of main memory. The real-time operating system VxWorks has been ported to the processor. The application code is written in C on a host SUN 4 UNIX workstation. The IRST is the result of a combined effort by physicists, electrical and mechanical engineers, and computer scientists.

Ott, L.

1994-11-15T23:59:59.000Z

271

Thulium-170 heat source  

DOE Patents [OSTI]

An isotopic heat source is formed using stacks of thin individual layers of a refractory isotopic fuel, preferably thulium oxide, alternating with layers of a low atomic weight diluent, preferably graphite. The graphite serves several functions: to act as a moderator during neutron irradiation, to minimize bremsstrahlung radiation, and to facilitate heat transfer. The fuel stacks are inserted into a heat block, which is encased in a sealed, insulated and shielded structural container. Heat pipes are inserted in the heat block and contain a working fluid. The heat pipe working fluid transfers heat from the heat block to a heat exchanger for power conversion. Single phase gas pressure controls the flow of the working fluid for maximum heat exchange and to provide passive cooling.

Walter, Carl E. (Pleasanton, CA); Van Konynenburg, Richard (Livermore, CA); VanSant, James H. (Tracy, CA)

1992-01-01T23:59:59.000Z

272

Multiple source heat pump  

DOE Patents [OSTI]

A heat pump apparatus for conditioning a fluid characterized by a fluid handler and path for circulating a fluid in heat exchange relationship with a refrigerant fluid, at least three refrigerant heat exchangers, one for effecting heat exchange with the fluid, a second for effecting heat exchange with a heat exchange fluid, and a third for effecting heat exchange with ambient air; a compressor for compressing the refrigerant; at least one throttling valve connected at the inlet side of a heat exchanger in which liquid refrigerant is vaporized; a refrigerant circuit; refrigerant; a source of heat exchange fluid; heat exchange fluid circuit and pump for circulating the heat exchange fluid in heat exchange relationship with the refrigerant; and valves or switches for selecting the heat exchangers and directional flow of refrigerant therethrough for selecting a particular mode of operation. Also disclosed are a variety of embodiments, modes of operation, and schematics therefor.

Ecker, Amir L. (Duncanville, TX)

1983-01-01T23:59:59.000Z

273

Extreme-Point Stability Tests for Discrete-Time Polynomials  

E-Print Network [OSTI]

TA9 -10:40 Extreme-Point Stability Tests for Discrete-Time Polynomials F. PCrez *, C been an increasinginterest in finding extreme- point results for the study of stability of uncertain in the coefficients space where Schur stability of the extremes im- plies the stability of the entire family 12). Our

274

Stability Study of the RERTR Fuel Microstructure  

SciTech Connect (OSTI)

The irradiation stability of the interaction phases at the interface of fuel and Al alloy matrix as well as the stability of the fission gas bubble superlattice is believed to be very important to the U-Mo fuel performance. In this paper the recent result from TEM characterization of Kr ion irradiated U-10Mo-5Zr alloy will be discussed. The focus will be on the phase stability of Mo2-Zr, a dominated second phase developed at the interface of U-10Mo and the Zr barrier in a monolithic fuel plate from fuel fabrication. The Kr ion irradiations were conducted at a temperature of 200 degrees C to an ion fluence of 2.0E+16 ions/cm2. To investigate the thermal stability of the fission gas bubble superlattice, a key microstructural feature in both irradiated dispersion U-7Mo fuel and monolithic U-10Mo fuel, a FIB-TEM sample of the irradiated U-10Mo fuel (3.53E+21 fission/cm3) was used for a TEM in-situ heating experiment. The preliminary result showed extraordinary thermal stability of the fission gas bubble superlattice. The implication of the TEM observation from these two experiments on the fuel microstructural evolution under irradiation will be discussed.

Jian Gan; Dennis Keiser; Brandon Miller; Daniel Wachs

2014-04-01T23:59:59.000Z

275

The (In)Stability of Planetary Systems  

E-Print Network [OSTI]

We present results of numerical simulations which examine the dynamical stability of known planetary systems, a star with two or more planets. First we vary the initial conditions of each system based on observational data. We then determine regions of phase space which produce stable planetary configurations. For each system we perform 1000 ~1 million year integrations. We examine upsilon And, HD83443, GJ876, HD82943, 47UMa, HD168443, and the solar system (SS). We find that the resonant systems, 2 planets in a first order mean motion resonance, (HD82943 and GJ876) have very narrow zones of stability. The interacting systems, not in first order resonance, but able to perturb each other (upsilon And, 47UMa, and SS) have broad regions of stability. The separated systems, 2 planets beyond 10:1 resonance, (we only examine HD83443 and HD168443) are fully stable. Furthermore we find that the best fits to the interacting and resonant systems place them very close to unstable regions. The boundary in phase space between stability and instability depends strongly on the eccentricities, and (if applicable) the proximity of the system to perfect resonance. In addition to million year integrations, we also examined stability on ~100 million year timescales. For each system we ran ~10 long term simulations, and find that the Keplerian fits to these systems all contain configurations which may be regular on this timescale.

Rory Barnes; Thomas Quinn

2004-01-09T23:59:59.000Z

276

Process for stabilizing the viscosity characteristics of coal derived materials and the stabilized materials obtained thereby  

DOE Patents [OSTI]

A process is disclosed for stabilizing the viscosity of coal derived materials such as an SRC product by adding up to 5.0% by weight of a light volatile phenolic viscosity repressor. The viscosity will remain stabilized for a period of time of up to 4 months.

Bronfenbrenner, James C. (Allentown, PA); Foster, Edward P. (Allentown, PA); Tewari, Krishna (Allentown, PA)

1985-01-01T23:59:59.000Z

277

Wind Power Plant Voltage Stability Evaluation: Preprint  

SciTech Connect (OSTI)

Voltage stability refers to the ability of a power system to maintain steady voltages at all buses in the system after being subjected to a disturbance from a given initial operating condition. Voltage stability depends on a power system's ability to maintain and/or restore equilibrium between load demand and supply. Instability that may result occurs in the form of a progressive fall or rise of voltages of some buses. Possible outcomes of voltage instability are the loss of load in an area or tripped transmission lines and other elements by their protective systems, which may lead to cascading outages. The loss of synchronism of some generators may result from these outages or from operating conditions that violate a synchronous generator's field current limit, or in the case of variable speed wind turbine generator, the current limits of power switches. This paper investigates the impact of wind power plants on power system voltage stability by using synchrophasor measurements.

Muljadi, E.; Zhang, Y. C.

2014-09-01T23:59:59.000Z

278

Radiation stability of biocompatibile magnetic fluid  

E-Print Network [OSTI]

The radiation stability of biocompatibile magnetic fluid used in nanomedicine after electron irradiation was studied. Two types of the water-based magnetic fluids were prepared. The first one was based on the magnetite nanoparticles stabilized by one surfactant natrium oleate. The second one was biocompatibile magnetic fluid stabilized with two surfactants, natrium oleate as a first surfactant and Poly(ethylene glycol) (PEG) as a second surfactant. The magnetization measurements showed that electron irradiation up to 1000Gy caused 50% reduction of saturation magnetization in the case of the first sample with only one surfactant while in the case of the second biocompatibile magnetic fluid, only 25% reduction of saturation magnetization was observed. In the first magnetic fluid the radiation caused the higher sedimentation of the magnetic particles than in the second case, when magnetic particles are covered also with PEG. The obtained results show that PEG behave as a protective element.

Natalia Tomasovicova; Ivan Haysak; Martina Koneracka; Jozef Kovac; Milan Timko; Vlasta Zavisova; Alexander Okunev; Alexander Parlag; Alexey Fradkin; Peter Kopcansky

2010-09-30T23:59:59.000Z

279

Vacuum (meta)stability beyond the MSSM  

SciTech Connect (OSTI)

We study the stability of the Higgs potential in the framework of the effective Lagrangian beyond the minimal supersymmetric standard model (MSSM). While the leading nonrenormalizable operators can shift the Higgs boson mass above the experimental bound, they also tend to render the scalar potential unbounded from below. The destabilization is correlated with the Higgs mass increase, so that if quantum corrections are small the problem is severe. We show that a supersymmetric subleading correction stabilizes the potential within the domain of validity of the effective theory. Constraints on MSSM parameters as well as on higher dimensional operators are derived, ensuring that our vacuum has a lifetime longer than the present age of the Universe. In addition we show that when effective operators are responsible for evading the LEP bound, stability constraints imply an upper bound on the scale of new physics in the few TeV range.

Blum, Kfir; Delaunay, Cedric; Hochberg, Yonit [Department of Particle Physics, Weizmann Institute of Science, Rehovot 76100 (Israel)

2009-10-01T23:59:59.000Z

280

In-Source Fragmentation and the Sources of Partially Tryptic...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

using three biological samples, including a standard protein mixture, a mouse brain tissue homogenate, and a mouse plasma sample. Since the in-source fragments of a...

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Mercury stabilization in chemically bonded phosphate ceramics  

SciTech Connect (OSTI)

Mercury stabilization and solidification is a significant challenge for conventional stabilization technologies. This is because of the stringent regulatory limits on leaching of its stabilized products. In a conventional cement stabilization process, Hg is converted at high pH to its hydroxide, which is not a very insoluble compound; hence the preferred route for Hg sulfidation to convert it into insoluble cinnabar (HgS). Unfortunately, efficient formation of this compound is pH-dependent. At a high pH, one obtains a more soluble Hg sulfate, in a very low pH range, insufficient immobilization occurs because of the escape of hydrogen sulfide, while efficient formation of HgS occurs only in a moderately acidic region. Thus, the pH range of 4 to 8 is where stabilization with Chemically Bonded Phosphate Ceramics (CBPC) is carried out. This paper discusses the authors experience on bench-scale stabilization of various US Department of Energy (DOE) waste streams containing Hg in the CBPC process. This process was developed to treat DOE's mixed waste streams. It is a room-temperature-setting process based on an acid-base reaction between magnesium oxide and monopotassium phosphate solution that forms a dense ceramic within hours. For Hg stabilization, addition of a small amount (< 1 wt.%) of Na{sub 2}S or K{sub 2}S is sufficient in the binder composition. Here the Toxicity Characteristic Leaching Procedure (TCLP) results on CBPC waste forms of surrogate waste streams representing secondary Hg containing wastes such as combustion residues and Delphi DETOX{trademark} residues are presented. The results show that although the current limit on leaching of Hg is 0.2 mg/L, the results from the CBPC waste forms are at least one order lower than this stringent limit. Encouraged by these results on surrogate wastes, they treated actual low-level Hg-containing mixed waste from their facility at Idaho. TCLP results on this waste are presented here. The efficient stabilization in all these cases is attributed to chemical immobilization as both a sulfide (cinnabar) and a phosphate, followed by its physical encapsulation in a dense matrix of the ceramic.

Wagh, A. S.; Singh, D.; Jeong, S. Y.

2000-04-04T23:59:59.000Z

282

Runge-Kutta formulas of optimum stability  

E-Print Network [OSTI]

RUNGE-KUTTA FOK'IULAS OF OPTIMUM STABILITY A Thesis by HECTOR GONZALES SIERRA Submitted. to the Graduate College of Texas ASM University in partial fulfillment of the requirement for tno degree of MASTER OF SCIENCE May 196$ Major Subject... Mathematics RUNGE ? KUTTA 1'OR1'IULAS OP OPTI11U1, STABILITY A Thesis by RECTOR GONZALES SIERRA Approved as to style and content by: (Chairman of Committee 1ead of Departmen member Nay 1$6a ABSTRACT RAGE-KUTTA PORKJLAS OP OPTIKJN STAl3ILI1Y. (Nay I...

Sierra, Hector Gonzales

1969-01-01T23:59:59.000Z

283

Baby Skyrmions stabilized by vector mesons  

E-Print Network [OSTI]

Recent results suggest that multi-Skyrmions stabilized by omega mesons have very similar properties to those stabilized by the Skyrme term. In this paper we present the results of a detailed numerical investigation of a (2+1)-dimensional analogue of this situation. Namely, we compute solitons in an O(3) sigma-model coupled to a massive vector meson and compare the results to baby Skyrmions, which are solitons in an O(3) sigma-model including a Skyrme term. We find that multi-solitons in the vector meson model are surprisingly similar to those in the baby Skyrme model, and we explain this correspondence using a simple derivative expansion.

David Foster; Paul Sutcliffe

2009-01-23T23:59:59.000Z

284

Quantum Stabilizer Codes Embedding Qubits Into Qudits  

E-Print Network [OSTI]

We study, by means of the stabilizer formalism, a quantum error correcting code which is alternative to the standard block codes since it embeds a qubit into a qudit. The code exploits the non-commutative geometry of discrete phase space to protect the qubit against both amplitude and phase errors. The performance of such code is evaluated on Weyl channels by means of the entanglement fidelity as function of the error probability. A comparison with standard block codes, like five and seven qubit stabilizer codes, shows its superiority.

Carlo Cafaro; Federico Maiolini; Stefano Mancini

2012-07-30T23:59:59.000Z

285

Stability of Anisotropic Cylinder with Zero Expansion  

E-Print Network [OSTI]

We study the dynamical instability of anisotropic collapsing cylinder with the expansion-free condition, which generates vacuum cavity within fluid distribution. The perturbation scheme is applied to distinguish Newtonian, post-Newtonian and post-post Newtonian terms, which are used for constructing dynamical equation at Newtonian and post-Newtonian regimes. We analyze the role of pressure anisotropy and energy density inhomogeneity on the stability of collapsing cylinder. It turns out that stability of the cylinder depends upon these physical properties of the fluid, not on the stiffness of the fluid.

M. Sharif; M. Azam

2013-05-24T23:59:59.000Z

286

Portable Source Identification Device  

SciTech Connect (OSTI)

U.S. Customs and Border Protection (CBP) is the primary enforcement agency protecting the nationís ports of entry. CBP is enhancing its capability to interdict the illicit import of nuclear and radiological materials and devices that may be used by terrorists. Pacific Northwest National Laboratory (PNNL) is providing scientific and technical support to CBP in their goal to enable rapid deployment of nuclear and radiation detection systems at U. S. ports of entry to monitor 100% of the incoming international traffic and cargo while not adversely impacting the operations or throughput of the ports. As the deployment of radiation detection systems proceeds, there is a need to adapt the baseline radiation portal monitor (RPM) system technology to operations at these diverse ports of entry. When screening produces an alarm in the primary inspection RPM, the alarming vehicle is removed from the flow of commerce and the alarm is typically confirmed in a secondary inspection RPM. The portable source identification device (PSID) is a radiation sensor panel (RSP), based on thallium-doped sodium iodide (NaI(Tl)) scintillation detector and gamma spectroscopic analysis hardware and software, mounted on a scissor lift on a small truck. The lift supports a box containing a commercial off-the-shelf (COTS) sodium iodide detector that provides real-time isotopic identification, including neutron detectors to interdict Weapons of Mass Destruction (WMD) and radiation dispersion devices (RDD). The scissor lift will lower the detectors to within a foot off the ground and raise them to approximately 24 feet in the air, allowing a wide vertical scanning range.

Andersen, Eric S.; Samuel, Todd J.; Gervais, Kevin L.

2005-08-01T23:59:59.000Z

287

Constricted glow discharge plasma source  

DOE Patents [OSTI]

A constricted glow discharge chamber and method are disclosed. The polarity and geometry of the constricted glow discharge plasma source is set so that the contamination and energy of the ions discharged from the source are minimized. The several sources can be mounted in parallel and in series to provide a sustained ultra low source of ions in a plasma with contamination below practical detection limits. The source is suitable for applying films of nitrides such as gallium nitride and oxides such as tungsten oxide and for enriching other substances in material surfaces such as oxygen and water vapor, which are difficult process as plasma in any known devices and methods. The source can also be used to assist the deposition of films such as metal films by providing low-energy ions such as argon ions.

Anders, Andre (Albany, CA); Anders, Simone (Albany, CA); Dickinson, Michael (San Leandro, CA); Rubin, Michael (Berkeley, CA); Newman, Nathan (Winnetka, IL)

2000-01-01T23:59:59.000Z

288

Pyrolysis process for producing condensed stabilized hydrocarbons utilizing a beneficially reactive gas  

DOE Patents [OSTI]

In a process for recovery of values contained in solid carbonaceous material, the solid carbonaceous material is comminuted and then subjected to pyrolysis, in the presence of a carbon containing solid particulate source of heat and a beneficially reactive transport gas in a transport flash pyrolysis reactor, to form a pyrolysis product stream. The pyrolysis product stream contains a gaseous mixture and particulate solids. The solids are separated from the gaseous mixture to form a substantially solids-free gaseous stream which comprises volatilized hydrocarbon free radicals newly formed by pyrolysis. Preferably the solid particulate source of heat is formed by oxidizing part of the separated particulate solids. The beneficially reactive transport gas inhibits the reactivity of the char product and the carbon-containing solid particulate source of heat. Condensed stabilized hydrocarbons are obtained by quenching the gaseous mixture stream with a quench fluid which contains a capping agent for stabilizing and terminating newly formed volatilized hydrocarbon free radicals. The capping agent is partially depleted of hydrogen by the stabilization and termination reaction. Hydrocarbons of four or more carbon atoms in the gaseous mixture stream are condensed. A liquid stream containing the stabilized liquid product is then treated or separated into various fractions. A liquid containing the hydrogen depleted capping agent is hydrogenated to form a regenerated capping agent. At least a portion of the regenerated capping agent is recycled to the quench zone as the quench fluid. In another embodiment capping agent is produced by the process, separated from the liquid product mixture, and recycled.

Durai-Swamy, Kandaswamy (Culver City, CA)

1982-01-01T23:59:59.000Z

289

Linac Coherent Light Source Overview  

ScienceCinema (OSTI)

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

None

2013-05-29T23:59:59.000Z

290

Linac Coherent Light Source Overview  

Broader source: Energy.gov [DOE]

Take an animated tour of the Linac Coherent Light Source (LCLS). Follow the laser pulse from the injector gun all the way through to the Far Experimental Hall.

291

Alternative Energy Sources Ė Myths and Realities  

E-Print Network [OSTI]

Alternative Energy Sources - Myths and Realities Walterneed to think about alternative energy sources; the worlddepletion of oil? Alternative energy sources can be divided

Youngquist, Walter

1998-01-01T23:59:59.000Z

292

High Brightness Neutron Source for Radiography  

SciTech Connect (OSTI)

This research and development program was designed to improve nondestructive evaluation of large mechanical objects by providing both fast and thermal neutron sources for radiography. Neutron radiography permits inspection inside objects that x-rays cannot penetrate and permits imaging of corrosion and cracks in low-density materials. Discovering of fatigue cracks and corrosion in piping without the necessity of insulation removal is possible. Neutron radiography sources can provide for the nondestructive testing interests of commercial and military aircraft, public utilities and petrochemical organizations. Three neutron prototype neutron generators were designed and fabricated based on original research done at the Lawrence Berkeley National Laboratory (LBNL). The research and development of these generators was successfully continued by LBNL and Adelphi Technology Inc. under this STTR. The original design goals of high neutron yield and generator robustness have been achieved, using new technology developed under this grant. In one prototype generator, the fast neutron yield and brightness was roughly 10 times larger than previously marketed neutron generators using the same deuterium-deuterium reaction. In another generator, we integrate a moderator with a fast neutron source, resulting in a high brightness thermal neutron generator. The moderator acts as both conventional moderator and mechanical and electrical support structure for the generator and effectively mimics a nuclear reactor. In addition to the new prototype generators, an entirely new plasma ion source for neutron production was developed. First developed by LBNL, this source uses a spiral antenna to more efficiently couple the RF radiation into the plasma, reducing the required gas pressure so that the generator head can be completely sealed, permitting the possible use of tritium gas. This also permits the generator to use the deuterium-tritium reaction to produce 14-MeV neutrons with increases of yield of two orders of magnitude. The first fast neutron radiographic images were obtained using neutron cameras and a new fast neutron generator. These early images demonstrated the feasibility of using fast neutrons for imaging and penetrating thick objects of high density and imaging. Fast neutrons can be used to image low atomic number materials (e.g. plastics, explosives, lubricants and ceramics) that are shielded by high density materials (e.g. lead, tungsten and uranium). Fast neutron radiography could be used as a means to screen weapons for flaws and chemical stability. X-ray radiography can not easily do this. Fast neutron imaging is technically difficult and, consequently, a completely undeveloped market. Two of the generators were designed to have small source size and high brightness, ideal for fast-neutron imaging. With these generators we successfully used two fast neutron cameras: one developed by us, and another developed by a collaborator, Commonwealth Scientific and Industrial Research Organization, CSIRO. We have successfully used these cameras to obtain low resolution images of various objects such as pipe fittings filled with water and other mechanical objects. Higher resolution and contrast images are expected by decreasing the source size and increasing generator yield.

Cremer, J. T.; Piestrup, Melvin, A.; Gary, Charles, K.; Harris, Jack, L. Williams, David, J.; Jones, Glenn, E.; Vainionpaa, J. , H.; Fuller, Michael, J.; Rothbart, George, H.; Kwan, J., W.; Ludewigt, B., A.; Gough, R.., A..; Reijonen, Jani; Leung, Ka-Ngo

2008-12-08T23:59:59.000Z

293

Exergy Analysis and Operational Efficiency of a Horizontal Ground Source Heat Pump System Operated in a Low-Energy Test House under Simulated Occupancy Conditions  

SciTech Connect (OSTI)

This paper presents data, analyses, measures of performance, and conclusions for a ground-source heat pump (GSHP) providing space conditioning to a 345m2 house whose envelope is made of structural insulated panels (SIP). The entire thermal load of this SIP house with RSI-3.7 (RUS-21) walls, triple pane windows with a U-factor of 1.64 W/m2 K (0.29 Btu/h ft2 oF) and solar heat gain coefficient (SHGC) of 0.25, a roof assembly with overall thermal resistance of about RSI-8.8 (RUS-50) and low leakage rates of 0.74 ACH at 50Pa was satisfied with a 2.16-Ton (7.56 kW) GSHP unit consuming negligible (9.83kWh) auxiliary heat during peak winter season. The highest and lowest heating COP achieved was 4.90 (October) and 3.44 (February), respectively. The highest and lowest cooling COP achieved was 6.09 (April) and 3.88 (August). These COPs are calculated on the basis of the total power input (including duct, ground loop, and control power losses ). The second Law (Exergy) analysis provides deep insight into how systemic inefficiencies are distributed among the various GSHP components. Opportunities for design and further performance improvements are identified. Through Exergy analysis we provide a true measure of how closely actual performance approaches the ideal, and it unequivocally identifies, better than energy analysis does, the sources and causes of lost work, the root cause of system inefficiencies.

Ally, Moonis Raza [ORNL; Baxter, Van D [ORNL; Munk, Jeffrey D [ORNL; Gehl, Anthony C [ORNL

2012-01-01T23:59:59.000Z

294

Dilution-based emissions sampling from stationary sources: part 2 - gas-fired combustors compared with other fuel-fired systems  

SciTech Connect (OSTI)

With the recent focus on fine particle matter (PM2.5), new, self- consistent data are needed to characterize emissions from combustion sources. Emissions data for gas-fired combustors are presented, using dilution sampling as the reference. The sampling and analysis of the collected particles in the presence of precursor gases, SO{sub 2}, nitrogen oxide, volatile organic compound, and NH{sub 3} is discussed; the results include data from eight gas fired units, including a dual- fuel institutional boiler and a diesel engine powered electricity generator. These data are compared with results in the literature for heavy-duty diesel vehicles and stationary sources using coal or wood as fuels. The results show that the gas-fired combustors have very low PM2.5 mass emission rates in the range of {approximately}10{sup -4} lb/million Btu (MMBTU) compared with the diesel backup generator with particle filter, with {approximately} 5 x 10{sup -3} lb/MMBTU. Even higher mass emission rates are found in coal-fired systems, with rates of {approximately} 0.07 lb/MMBTU for a bag-filter-controlled pilot unit burning eastern bituminous coal. The characterization of PM2.5 chemical composition from the gas-fired units indicates that much of the measured primary particle mass in PM2.5 samples is organic or elemental carbon and, to a much less extent, sulfate. Metal emissions are low compared with the diesel engines and the coal- or wood-fueled combustors. The metals found in the gas- fired combustor particles are low in concentration. The interpretation of the particulate carbon emissions is complicated by the fact that an approximately equal amount of particulate carbon is found on the particle collector and a backup filter. It is likely that measurement artifacts are positively biasing 'true' particulate carbon emissions results. 49 refs., 1 fig., 12 tabs.

England, G.C.; Watson, J.G.; Chow, J.C.; Zielinska, B.; Chang, M.C.O.; Loos, K.R.; Hidy. G.M. [GE Energy, Santa Ana, CA (United States)

2007-01-15T23:59:59.000Z

295

LASER STABILIZATION FOR NEAR ZERO NO{sub x} GAS TURBINE COMBUSTION SYSTEMS  

SciTech Connect (OSTI)

Historically, the development of new industrial gas turbines has been primarily driven by the intent to achieve higher efficiency, lower operating costs and lower emissions. Higher efficiency and lower cost is obtained through higher turbine operating temperatures, while reduction in emissions is obtained by extending the lean operating limit of the combustor. However reduction in the lean stability limit of operation is limited greatly by the chemistry of the combustion process and by the occurrence of thermo-acoustic instabilities. Solar Turbines, CFD Research Corporation, and Los Alamos National Laboratory have teamed to advance the technology associated with laser-assisted ignition and flame stabilization, to a level where it could be incorporated onto a gas turbine combustor. The system being developed is expected to enhance the lean stability limit of the swirl stabilized combustion process and assist in reducing combustion oscillations. Such a system has the potential to allow operation at the ultra-lean conditions needed to achieve NO{sub x} emissions below 5 ppm without the need of exhaust treatment or catalytic technologies. The research effort was focused on analytically modeling laser-assisted flame stabilization using advanced CFD techniques, and experimentally demonstrating the technology, using a solid-state laser and low-cost durable optics. A pulsed laser beam was used to generate a plasma pool at strategic locations within the combustor flow field such that the energy from the plasma became an ignition source and helped maintain a flame at ultra lean operating conditions. The periodic plasma generation and decay was used to nullify the fluctuations in the heat release from the flame itself, thus decoupling the heat release from the combustor acoustics and effectively reducing the combustion oscillations. The program was built on an existing technology base and includes: extending LANL's existing laser stabilization experience to a sub-scale combustor rig, performing and validating CFD predictions, and ultimately conducting a full system demonstration in a multi-injector combustion system at Solar Turbines.

Vivek Khanna

2002-09-30T23:59:59.000Z

296

The effect of convection on pulsational stability  

E-Print Network [OSTI]

A review on the current state of mode physics in classical pulsators is presented. Two, currently in use, time-dependent convection models are compared and their applications on mode stability are discussed with particular emphasis on the location of the Delta Scuti instability strip.

G. Houdek

2008-10-29T23:59:59.000Z

297

Amphiphiles for protein solubilization and stabilization  

DOE Patents [OSTI]

The invention provides amphiphiles for manipulating membrane proteins. The amphiphiles can feature carbohydrate-derived hydrophilic groups and branchpoints in the hydrophilic moiety and/or in a lipophilic moiety. Such amphiphiles are useful as detergents for solubilization and stabilization of membrane proteins, including photosynthetic protein superassemblies obtained from bacterial membranes.

Gellman, Samuel Helmer; Chae, Pil Seok; Laible, Philip D.; Wander, Marc J.

2012-09-11T23:59:59.000Z

298

PID Controller Synthesis with Specified Stability Requirement  

E-Print Network [OSTI]

PID Controller Synthesis with Specified Stability Requirement for Some Classes of MIMO Systems T. S+Integral+Derivative (PID) con- trollers, where the closed-loop poles can be assigned to the left of an axis shifted PID-controllers with this property of small negative real-part assignability of closed-loop poles

Gundes, A. N.

299

Amphiphiles for protein solubilization and stabilization  

DOE Patents [OSTI]

The invention provides amphiphiles for manipulating membrane proteins. The amphiphiles can feature carbohydrate-derived hydrophilic groups and branchpoints in the hydrophilic moiety and/or in a lipophilic moiety. Such amphiphiles are useful as detergents for solubilization and stabilization of membrane proteins, including photosynthetic protein superassemblies obtained from bacterial membranes.

Gellman, Samuel Helmer; Chae, Pil Seok; Laible, Phillip D; Wander, Marc J

2014-11-04T23:59:59.000Z

300

Stability of Nanostructures on Surfaces Karsten Pohl  

E-Print Network [OSTI]

catalytic materials, higher sensitivity chem- ical sensors, and perhaps, quantum computers. Well- ordered with stabilizing forces derived from long-range elastic interactions between the islands. BACKGROUND Many­13] more selective catalysis and higher-sensitivity chemical sensors,[14] and, perhaps, nano- scale

Pohl, Karsten

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

LATERAL VEHICLE STABILIZATION USING CONSTRAINED NONLINEAR CONTROL  

E-Print Network [OSTI]

problems of designing a controller for the yaw dynamics are the nonlinearities which appear in the system, nonlinear systems, constraints. Abstract A lateral stabilization system for automotive vehicles is de of the vehicle during braking maneuvers. These systems were followed by traction control systems, which im- prove

Johansen, Tor Arne

302

UV STABILITY OF HIGH BIREFIRNGENCE LIQUID CRYSTALS  

E-Print Network [OSTI]

nm, the major UV light used for curing sealant. The material degradation is believed to originate experimental results indicate that the UV degradation not only depends on the absorption wavelength but alsoUV STABILITY OF HIGH BIREFIRNGENCE LIQUID CRYSTALS Pao-Tai Lin and Shin-Tson Wu School of Optics

Wu, Shin-Tson

303

Near-Neoclassical Transport & Enhanced Stability  

E-Print Network [OSTI]

magnetic shear configurations are particularly attractive for advanced tokamak reactors -- predicted and advanced tokamak physics Outline · Formation · Transport · MHD Stability · Future Directions TFTR #12;6 5 4 by Shaing and Hazeltine; Hinton and Kim modification of Hirshman-Sigmar equations · comparison with Full

304

ROCTECtm STABILIZATION TREATMENT OF WERF ASH  

SciTech Connect (OSTI)

The objective of this project is to demonstrate a process to stabilize mixed waste flyash generated by the combustion of mixed waste at the Idaho National Engineering & Environmental Laboratory's (INEEL's) Waste Experimental Reduction Facility (WERF) incinerator such that it will meet Resource Conservation and Recovery Act (RCRA) Land Disposal Restrictions (LDRs) Universal Treatment Standards.

Paul A. Lessing; William J. Quapp; Gary Renlund; Bob Clark; Colin Hundley; James Cornwell; Dave Schlier; John Bulko; Gene Pollack

1998-10-01T23:59:59.000Z

305

Lateral stability of long precast concrete beams  

E-Print Network [OSTI]

Lateral stability of long precast concrete beams T. J. Stratford, BA, BEng, and C. J. Burgoyne, BA, MSc, CEng, MICE & Modern precast concrete bridge beams are becoming increasingly long and slender, making them more susceptible to buckling failure. This paper shows that once the beam is positioned

Burgoyne, Chris

306

Stabilization of Mechanical Systems Using Controlled Lagrangians  

E-Print Network [OSTI]

for the problem of sta- bilization of an inverted pendulum on a cart and for the problem of stabilization≠91≠57556, AFOSR grant F49620-96-1- 0100, a Guggenheim Fellowship and the Inst. for Advanced Study. 2 can make use of energy methods which automati- cally provide a Lyapunov function for choosing control

Marsden, Jerrold

307

Stability, Energetics, and Turbulent Transport in  

E-Print Network [OSTI]

fields" Department of Astrophysical Sciences Spring Colloquium Steve Cowley (UK Atomic Energy Authority of solar-wind turbulence" Chris Chen (UC Berkeley) 2:40pm "Energy spectra in MHD turbulenceStability, Energetics, and Turbulent Transport in Astrophysical, Fusion, and Solar Plasmas 8

Torquato, Salvatore

308

Sulfate induced heave in lime stabilized soil  

E-Print Network [OSTI]

The addition of hydrated lime to clay soils is one of the most common methods of soil stabilization. However, when sulfates are present in the soil, the calcium in the lime reacts with the sulfates to form ettringite, an expandable mineral...

Bredenkamp, Sanet

1994-01-01T23:59:59.000Z

309

A Stability Index for Local Effectivity Functions  

E-Print Network [OSTI]

A Stability Index for Local Effectivity Functions Joseph Abdou October 9, 2009 Abstract We study - France; email: abdou@univ-paris1.fr 1 halshs-00389003,version1-14Oct2009 Author manuscript, published setting (see Abdou and Keiding (2003) for the general notion of effectiv- ity structure), we shall focus

Paris-Sud XI, Université de

310

Time-stretch microscopy based on time-wavelength sequence reconstruction from wideband incoherent source  

SciTech Connect (OSTI)

Time-stretch microscopy has emerged as an ultrafast optical imaging concept offering the unprecedented combination of the imaging speed and sensitivity. However, dedicated wideband and coherence optical pulse source with high shot-to-shot stability has been mandated for time-wavelength mappingóthe enabling process for ultrahigh speed wavelength-encoded image retrieval. From the practical point of view, exploiting methods to relax the stringent requirements (e.g., temporal stability and coherence) for the source of time-stretch microscopy is thus of great value. In this paper, we demonstrated time-stretch microscopy by reconstructing the time-wavelength mapping sequence from a wideband incoherent source. Utilizing the time-lens focusing mechanism mediated by a narrow-band pulse source, this approach allows generation of a wideband incoherent source, with the spectral efficiency enhanced by a factor of 18. As a proof-of-principle demonstration, time-stretch imaging with the scan rate as high as MHz and diffraction-limited resolution is achieved based on the wideband incoherent source. We note that the concept of time-wavelength sequence reconstruction from wideband incoherent source can also be generalized to any high-speed optical real-time measurements, where wavelength is acted as the information carrier.

Zhang, Chi, E-mail: chizheung@gmail.com; Xu, Yiqing; Wei, Xiaoming; Tsia, Kevin K.; Wong, Kenneth K. Y., E-mail: kywong@eee.hku.hk [Photonic Systems Research Laboratory, Department of Electrical and Electronic Engineering, The University of Hong Kong, Pokfulam Road (Hong Kong)

2014-07-28T23:59:59.000Z

311

Hollow electrode plasma excitation source  

DOE Patents [OSTI]

A plasma source incorporates a furnace as a hollow anode, while a coaxial cathode is disposed therewithin. The source is located in a housing provided with an ionizable gas such that a glow discharge is produced between anode and cathode. Radiation or ionic emission from the glow discharge characterizes a sample placed within the furnace and heated to elevated temperatures. 5 figs.

Ballou, N.E.

1992-04-14T23:59:59.000Z

312

BSTBacterial Source Tracking Conference Proceedings  

E-Print Network [OSTI]

BSTBacterial Source Tracking Conference Proceedings 2012 Bacterial Source Tracking State Conference Conference Proceedings Prepared by: Lucas Gregory, Texas Water Resources Institute Courtney Smith of the Science Conference Texas Water Resources Institute TR-427 June 2012 #12;#12;Texas Water Resources

313

Particle Acceleration in Astrophysical Sources  

E-Print Network [OSTI]

Astrophysical sources are extremely efficient accelerators. Some sources emit photons up to multi-TeV energies, a signature of the presence, within them, of particles with energies much higher than those achievable with the largest accelerators on Earth. Even more compelling evidence comes from the study of Cosmic Rays, charged relativistic particles that reach the Earth with incredibly high energies: at the highest energy end of their spectrum, these subatomic particles are carrying a macroscopic energy, up to a few Joules. Here I will address the best candidate sources and mechanisms as cosmic particle accelerators. I will mainly focus on Galactic sources such as Supernova Remnants and Pulsar Wind Nebulae, which being close and bright, are the best studied among astrophysical accelerators. These sources are held responsible for most of the energy that is put in relativistic particles in the Universe, but they are not thought to accelerate particles up to the highest individual energies, $\\approx 10^{20}$ eV...

Amato, Elena

2015-01-01T23:59:59.000Z

314

Sealed source peer review plan  

SciTech Connect (OSTI)

Sealed sources are known quantities of radioactive materials that have been encapsulated in quantities that produce known radiation fields. Sealed sources have multiple uses ranging from instrument calibration sources to sources that produce radiation fields for experimental applications. The Off-Site Source Recovery (OSR) Project at Los Alamos National Laboratory (LANL), created in 1999, under the direction of the Waste Management Division of the U.S. Department of Energy (DOE) Albuquerque has been assigned the responsibility to recover and manage excess and unwanted radioactive sealed sources from the public and private sector. LANL intends to ship drums containing qualified sealed sources to the Waste Isolation Pilot Plant (WIPP) for disposal. Prior to shipping, these drums must be characterized with respect to radiological content and other parameters. The U. S. Environmental Protection Agency (EPA) requires that ten radionulcides be quantified and reported for every container of waste to be disposed in the WIPP. The methods traditionally approved by the EPA include non-destructive assay (NDA) in accordance with Appendix A of the Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (DOE, 2002) (CH WAC). However, because of the nature and pedigree of historical records for sealed sources and the technical infeasibility of performing NDA on these sources, LANL proposes to characterize the content of these waste drums using qualified existing radiological data in lieu of direct measurement. This plan describes the process and documentation requirements for the use of the peer review process to qualify existing data for sealed radiological sources in lieu of perfonning radioassay. The peer review process will be performed in accordance with criteria provided in 40 CFR {section} 194.22 which specifies the use of the NUREG 1297 guidelines. The plan defines the management approach, resources, schedule, and technical requirements for the subject peer review.

Feldman, Alexander [Los Alamos National Laboratory; Leonard, Lee [RETIRED; Burns, Ron [CONTRACTOR

2009-01-01T23:59:59.000Z

315

Environmental Technology Verification of Mobile Sources Control...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Environmental Technology Verification of Mobile Sources Control Technologies Environmental Technology Verification of Mobile Sources Control Technologies 2005 Diesel Engine...

316

Interconnected High-Voltage Pulsed-Power Converters System Design for H? Ion Sources  

E-Print Network [OSTI]

This paper presents the design and experimental validations of a system of three new high-voltage (HV) pulsedpower converters for the H? sources. The system requires three pulsed voltages (50, 40, and 25 kV to ground) at 2-Hz repetition rate, for 700 ?s of usable flat-top. The solution presents ripplefree output voltages and minimal stored energy to protect the ion source from the consequences of arc events. Experimental results on the final full-scale prototype are presented. In case of short-circuit events, the maximal energy delivered to the source is in the Joule range. HV flat-top stability of 1% is experimentally achieved with a simple Proportional-Integral- Derivative regulation and preliminary tuned H? source (e.g., radio frequency control, gas injection, and so forth). The system is running since more than a year with no power converter failures and damage to the source.

Aguglia, D

2014-01-01T23:59:59.000Z

317

Diversity employment and recruitment sources  

SciTech Connect (OSTI)

Effective human resources management has been identified as one of four critical success factors in the Department of Energy Strategic Plan. The Plan states relative to this factor: ``The Department seeks greater alignment of resources with agency priorities and increased diversification of the workforce, including gender, ethnicity, age, and skills. This diversification will bring new thinking and perspectives that heretofore have not had a voice in departmental decision-making.`` This Guide has been developed as a key tool to assist Department of Energy management and administrative staff in achieving Goal 2 of this critical success factor, which is to ``Ensure a diverse and talented workforce.`` There are numerous sources from which to recruit minorities, women and persons with disabilities. Applying creativity and proactive effort, using traditional and non-traditional approaches, and reaching out to various professional, academic and social communities will increase the reservoir of qualified candidates from which to make selections. In addition, outreach initiatives will undoubtedly yield further benefits such as a richer cultural understanding and diversity awareness. The resource listings presented in this Guide are offered to encourage active participation in the diversity recruitment process. This Guide contains resource listings by state for organizations in the following categories: (1) African American Recruitment Sources; (2) Asian American/Pacific Islander Recruitment Sources; (3) Hispanic Recruitment Sources; (4) Native American/Alaskan Native Recruitment Sources; (5) Persons with Disabilities Recruitment Sources; and (6) Women Recruitment Sources.

Not Available

1994-08-01T23:59:59.000Z

318

International Data on Radiological Sources  

SciTech Connect (OSTI)

ABSTRACT The mission of radiological dispersal device (RDD) nuclear forensics is to identify the provenance of nuclear and radiological materials used in RDDs and to aid law enforcement in tracking nuclear materials and routes. The application of databases to radiological forensics is to match RDD source material to a source model in the database, provide guidance regarding a possible second device, and aid the FBI by providing a short list of manufacturers and distributors, and ultimately to the last legal owner of the source. The Argonne/Idaho National Laboratory RDD attribution database is a powerful technical tool in radiological forensics. The database (1267 unique vendors) includes all sealed sources and a device registered in the U.S., is complemented by data from the IAEA Catalogue, and is supported by rigorous in-lab characterization of selected sealed sources regarding physical form, radiochemical composition, and age-dating profiles. Close working relationships with global partners in the commercial sealed sources industry provide invaluable technical information and expertise in the development of signature profiles. These profiles are critical to the down-selection of potential candidates in either pre- or post- event RDD attribution. The down-selection process includes a match between an interdicted (or detonated) source and a model in the database linked to one or more manufacturers and distributors.

Martha Finck; Margaret Goldberg

2010-07-01T23:59:59.000Z

319

The Stability of Organic Solvents and Carbon Electrode in Nonaqueous...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The Stability of Organic Solvents and Carbon Electrode in Nonaqueous Li-O2 Batteries. The Stability of Organic Solvents and Carbon Electrode in Nonaqueous Li-O2 Batteries....

320

Effects of additives on the stability of electrolytes for all...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Effects of additives on the stability of electrolytes for all-vanadium redox flow batteries. Effects of additives on the stability of electrolytes for all-vanadium redox flow...

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Relation between viscosity and stability for heavy oil emulsions  

E-Print Network [OSTI]

The relation between viscosity and stability has been hics. found by investigating the effect of surfactant concentration on emulsion stability. Based on the Bingham plastic model for viscosity as a function of shear rate, two parameters were found...

Ye, Sherry Qianwen

1998-01-01T23:59:59.000Z

322

STABILITY ANALYSIS OF INTERCONNECTED POWER SYSTEMS COUPLED WITH MARKET DYNAMICS  

E-Print Network [OSTI]

STABILITY ANALYSIS OF INTERCONNECTED POWER SYSTEMS COUPLED WITH MARKET DYNAMICS F.L. Alvarado1 J of generators and network interconnections. This paper examines questions of stability in such coupled systems

323

Stability of Biodiesel and Biodiesel Blends: Interim Report  

SciTech Connect (OSTI)

This is an interim report for a study of biodiesel oxidative stability. It describes characterization and accelerated stability test results for 19 B100 samples and six diesel fuels.

McCormick, R. L.; Alleman, T. L.; Waynick, J. A.; Westbrook, S. R.; Porter, S.

2006-04-01T23:59:59.000Z

324

Upper bounds on minimum distance of nonbinary quantum stabilizer codes  

E-Print Network [OSTI]

The most popular class of quantum error correcting codes is stabilizer codes. Binary quantum stabilizer codes have been well studied, and Calderbank, Rains, Shor and Sloane (July 1998) have constructed a table of upper bounds on the minimum distance...

Kumar, Santosh

2005-11-01T23:59:59.000Z

325

Fourier-Mukai transforms and stability conditions on abelian threefolds†  

E-Print Network [OSTI]

Construction of Bridgeland stability conditions on a given Calabi-Yau threefold is an important problem and this thesis realizes the rst known examples of such stability conditions. More precisely, we construct a dense ...

Piyaratne, Hathurusinghege Dulip Bandara

2014-11-27T23:59:59.000Z

326

Three chamber negative ion source  

DOE Patents [OSTI]

It is an object of this invention provide a negative ion source which efficiently provides a large flux of negatively ionized particles. This invention provides a volume source of negative ions which has a current density sufficient for magnetic fusion applications and has electrons suppressed from the output. It is still another object of this invention to provide a volume source of negative ions which can be electrostatically accelerated to high energies and subsequently neutralized to form a high energy neutral beam for use with a magnetically confined plasma.

Leung, K.N.; Ehlers, K.W.; Hiskes, J.R.

1983-11-10T23:59:59.000Z

327

Plutonium stabilization and handling (PuSH)  

SciTech Connect (OSTI)

This Functional Design Criteria (FDC) addresses construction of a Stabilization and Packaging System (SPS) to oxidize and package for long term storage remaining plutonium-bearing special nuclear materials currently in inventory at the Plutonium Finishing Plant (PFP), and modification of vault equipment to allow storage of resulting packages of stabilized SNM for up to fifty years. The major sections of the project are: site preparation; SPS Procurement, Installation, and Testing; storage vault modification; and characterization equipment additions. The SPS will be procured as part of a Department of Energy nationwide common procurement. Specific design crit1460eria for the SPS have been extracted from that contract and are contained in an appendix to this document.

Weiss, E.V.

1997-01-23T23:59:59.000Z

328

HVDC models used in stability studies  

SciTech Connect (OSTI)

A new generation of detailed models for HVDC systems has recently been applied in power system stability programs. These models represent the high speed dynamics of the converter controllers as well as the L/R dynamics of the dc transmission. Older dc models such as those described in reference which are based upon pseudo-steady state relationships are however still in general use. The latter models remain popular since they require a minimum of data and significantly less computer resources than the detailed models. The following questions therefore need to be answered concerning the two types of models: (1) To what extent is simulation accuracy impacted by using the older HVDC model. (2) Is the difference in precision significant compared to other uncertainties which are inherent in stability calculations. This paper addresses these questions and also considers a third type of HVDC model described in Appendix I which relieves some of the assumptions associated with the pseudo steady state models.

Johnson, B.K.

1989-04-01T23:59:59.000Z

329

Natural Analoges as a Check of Predicted Drift Stability at Yucca Mountain, Nevada  

SciTech Connect (OSTI)

Calculations made by the U.S. Department of Energy's Yucca Mountain Project as part of the licensing of a proposed geologic repository (in southwestern Nevada) for the disposal of high-level radioactive waste, predict that emplacement tunnels will remain open with little collapse long after ground support has disintegrated. This conclusion includes the effects of anticipated seismic events. Natural analogues cannot provide a quantitative test of this conclusion, but they can provide a reasonableness test by examining the natural and anthropogenic examples of stability of subterranean openings. Available data from a variety of sources, combined with limited observations by the author, show that natural underground openings tend to resist collapse for millions of years and that anthropogenic subterranean openings have remained open from before recorded history through today. This stability is true even in seismically active areas. In fact, the archaeological record is heavily skewed toward preservation of underground structures relative to those found at the surface.

J. Stuckless

2006-03-10T23:59:59.000Z

330

Stabilization of spent calcium-based sorbent  

SciTech Connect (OSTI)

The overall objective of this project is to obtain experimental data on the reactions of calcium-based sorbents applicable to both air-blown coal gasification systems and second generation fluid bed coal combustion systems (partial gasification). The project is a 40-month effort. A key technical issue for the utilization of calcium sorbents in advanced coal technologies is the subsequent stabilization of the solid wastes (calcium sulfide/ash) produced by such systems.

Shires, P.J.; Katta, S.; Henningsen, G.B.

1994-10-01T23:59:59.000Z

331

The Dark Energy Star and Stability analysis  

E-Print Network [OSTI]

We have proposed a new model of dark energy star consisting of five zones namely, solid core of constant energy density, the thin shell between core and interior, an inhomogeneous interior region with anisotropic pressures, thin shell and the exterior vacuum region. We have discussed various physical properties. The model satisfies all the physical requirements. The stability condition under small linear perturbation has also been discussed.

Piyali Bhar; Farook Rahaman

2015-01-12T23:59:59.000Z

332

Cyclic Imide Dioxime: Formation and Hydrolytic Stability  

SciTech Connect (OSTI)

Poly(acrylamidoximes) play an important role in the uranium extraction from seawater. The present work reports solution studies of simple analogs to address the formation and stability of two binding sites present in these polymers, open-chain amidoximes and cyclic imide dioximes, including: 1) conditions that maximize the formation of the cyclic form, 2) existence of a base-induced conversion from open-chain to cyclic form, and 3) degradation under acid and base conditions.

Kang, S.O. [University of Kansas; Vukovic, Sinisa [ORNL; Custelcean, Radu [ORNL; Hay, Benjamin [ORNL

2012-01-01T23:59:59.000Z

333

Oxygen stabilized zirconium vanadium intermetallic compound  

DOE Patents [OSTI]

An oxygen stabilized intermetallic compound having the formula Zr.sub.x OV.sub.y where x=0.7 to 2.0 and y=0.18 to 0.33. The compound is capable of reversibly sorbing hydrogen at temperatures from -196.degree. C. to 450.degree. C. at pressures down to 10.sup.-6 Torr. The compound is also capable of selectively sorbing hydrogen from gaseous mixtures in the presence of CO and CO.sub.2.

Mendelsohn, Marshall H. (Woodridge, IL); Gruen, Dieter M. (Downers Grove, IL)

1982-01-01T23:59:59.000Z

334

Friction and the Inverted Pendulum Stabilization Problem Sue Ann Campbell  

E-Print Network [OSTI]

Friction and the Inverted Pendulum Stabilization Problem Sue Ann Campbell Department of Applied. Keywords: inverted pendulum, friction, feedback control, stability analysis. 1 #12;INTRODUCTION to be the cause of failure of a feedback controller to stabilize a three link inverted pendulum system [2

Campbell, Sue Ann

335

WHEN DOES FINANCIAL SECTOR (IN)STABILITY INDUCE FINANCIAL REFORMS?  

E-Print Network [OSTI]

WHEN DOES FINANCIAL SECTOR (IN)STABILITY INDUCE FINANCIAL REFORMS? Susie LEE Ingmar SCHUMACHER (in)stability induce financial reforms? Susie Lee1 Ingmar Schumacher2 October 26, 2011 Abstract The article studies whether financial sector (in)stability had an effect on reforms in the fi- nancial sector

Boyer, Edmond

336

Structure stability and spectroscopy of metal clusters. Progress report  

SciTech Connect (OSTI)

Theory based on self-consistent field-linear combinations of atomic orbitals-molecular orbital theory was applied to clusters. Four areas were covered: electronic structure, equilibrium geometries, and stability of charged clusters, interaction of metal clusters with H and halogen atoms, thermal stability of isolated clusters, and stability and optical properties of hetero-atomic clusters. (DLC)

Not Available

1993-06-01T23:59:59.000Z

337

Advanced PID type fuzzy logic power system stabilizer  

SciTech Connect (OSTI)

An advanced fuzzy logic control scheme has been proposed for a micro-computer based power system stabilizer to enhance the overall stability of power systems. The proposed control scheme utilizes the PID information of the generator speed. The input signal to the stabilizer is the real power output of a study unit. Simulations show the effectiveness of the advanced fuzzy logic control scheme.

Hiyama, Takashi; Kugimiya, Masahiko; Satoh, Hironori (Kumamoto Univ. (Japan). Dept. of Electrical Engineering and Computer Science)

1994-09-01T23:59:59.000Z

338

Local Exponential H2 Stabilization of a 2 2 Quasilinear  

E-Print Network [OSTI]

of boundary stabilization for a quasilinear 2√?2 system of first-order hyperbolic PDEs. We design a full stability of the closed-loop system. The proof of stability is based on the construction of a strict pipelines or road traffic models. This problem has been previously considered for 2 √? 2 systems [8] and even

Bastin, Georges

339

Polymeric Stabilized Emulsions: Steric Effects and Deformation in Soft Systems  

E-Print Network [OSTI]

used to control emulsion and foam stability.1,2 An understanding of the underlying stabilizing) was used to extend these studies to a larger range of underlying surfaces including zirconia,8 glass,9 and foams at low water content and to operate at the edge of stability, it is crucial to gain a more

Chan, Derek Y C

340

RELAP-7 Numerical Stabilization: Entropy Viscosity Method  

SciTech Connect (OSTI)

The RELAP-7 code is the next generation nuclear reactor system safety analysis code being developed at the Idaho National Laboratory (INL). The code is based on the INL's modern scientific software development framework, MOOSE (Multi-Physics Object Oriented Simulation Environment). The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical integration methods, and physical models. The end result will be a reactor systems analysis capability that retains and improves upon RELAP5's capability and extends the analysis capability for all reactor system simulation scenarios. RELAP-7 utilizes a single phase and a novel seven-equation two-phase flow models as described in the RELAP-7 Theory Manual (INL/EXT-14-31366). The basic equation systems are hyperbolic, which generally require some type of stabilization (or artificial viscosity) to capture nonlinear discontinuities and to suppress advection-caused oscillations. This report documents one of the available options for this stabilization in RELAP-7 -- a new and novel approach known as the entropy viscosity method. Because the code is an ongoing development effort in which the physical sub models, numerics, and coding are evolving, so too must the specific details of the entropy viscosity stabilization method. Here the fundamentals of the method in their current state are presented.

R. A. Berry; M. O. Delchini; J. Ragusa

2014-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Radiation source with shaped emission  

DOE Patents [OSTI]

Employing a source of radiation, such as an electric discharge source, that is equipped with a capillary region configured into some predetermined shape, such as an arc or slit, can significantly improve the amount of flux delivered to the lithographic wafers while maintaining high efficiency. The source is particularly suited for photolithography systems that employs a ringfield camera. The invention permits the condenser which delivers critical illumination to the reticle to be simplified from five or more reflective elements to a total of three or four reflective elements thereby increasing condenser efficiency. It maximizes the flux delivered and maintains a high coupling efficiency. This architecture couples EUV radiation from the discharge source into a ring field lithography camera.

Kubiak, Glenn D.; Sweatt, William C.

2003-05-13T23:59:59.000Z

342

Next Generation Light Source Workshops  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Next Generation Light Source Workshops A series of workshops will be held in late August with the goal of refining the scientific drivers for the facility and translating the...

343

HIGH STABILITY CURRENT SUPPLY FOR ELECTRON MICROSCOPY  

E-Print Network [OSTI]

the current regulator. The power losses through the powerFETs are (31): Power Loss = I drain V ds The drain current (by design to lower the power loss is the drain to source

Motamedi, Maryam Melani

2012-01-01T23:59:59.000Z

344

Impact of load type on microgrid stability  

E-Print Network [OSTI]

Microgrids show great promise as a means of integrating distributed generation sources into the public grid distribution system. In order to provide uninterrupted,high quality power to local loads, microgrids must have the ...

Monnin, Jared P

2012-01-01T23:59:59.000Z

345

Multilevel cascade voltage source inverter with seperate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

Peng, Fang Zheng (Oak Ridge, TN); Lai, Jih-Sheng (Knoxville, TN)

1997-01-01T23:59:59.000Z

346

Multilevel cascade voltage source inverter with separate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

Peng, F.Z.; Lai, J.S.

1997-06-24T23:59:59.000Z

347

Multilevel cascade voltage source inverter with seperate DC sources  

DOE Patents [OSTI]

A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

Peng, Fang Zheng (Knoxville, TN); Lai, Jih-Sheng (Blacksburg, VA)

2002-01-01T23:59:59.000Z

348

Recent progress in degradation and stabilization of organic solar cells  

SciTech Connect (OSTI)

Stability is of paramount importance in organic semiconductor devices, especially in organic solar cells (OSCs). Serious degradation in air limits wide applications of these flexible, light-weight and low-cost power-generation devices. Studying the stability of organic solar cells will help us understand degradation mechanisms and further improve the stability of these devices. There are many investigations into the efficiency and stability of OSCs. The efficiency and stability of devices even of the same photoactive materials are scattered in different papers. In particular, the extrinsic degradation that mainly occurs near the interface between the organic layer and the cathode is a major stability concern. In the past few years, researchers have developed many new cathodes and cathode buffer layers, some of which have astonishingly improved the stability of OSCs. In this review article, we discuss the recent developments of these materials and summarize recent progresses in the study of the degradation/stability of OSCs, with emphasis on the extrinsic degradation/stability that is related to the intrusion of oxygen and water. The review provides detailed insight into the current status of research on the stability of OSCs and seeks to facilitate the development of highly-efficient OSCs with enhanced stability.

Cao, Huanqi; He, Weidong; Mao, Yiwu; Lin, Xiao; Ishikawa, Ken; Dickerson, James H.; Hess, Wayne P.

2014-10-15T23:59:59.000Z

349

RF Pulse compression stabilization at the CTF3 CLIC test facility  

E-Print Network [OSTI]

In the CTF3 accelerator, the RF produced by each of ten 3 GHz klystrons goes through waveguides, RF pulse compressors and splitters. The RF phase and power transformation of these devices depend on their temperature. The quantitative effect of the room temperature variation on the RF was measured. It is the major source of undesired changes during the CTF3 operation. An RF phaseloop and a compressor temperature stabilization are developed to suppress the phase fluctuation and the power profile change due to the temperature variation. The implementation is transparent for operators, it does not limit anyhow the flexibility of RF manipulations. Expected and measured suppression characteristics will be given.

Dubrovskiy, Alexey

2010-01-01T23:59:59.000Z

350

Cross-check of ex-situ and in-situ metrology of a bendable temperature stabilized KB mirror  

SciTech Connect (OSTI)

At the Advanced Light Source (ALS), we are developing broadly applicable, high-accuracy, in-situ, at-wavelength wavefront slope measurement techniques for Kirkpatrick-Baez (KB) mirror nano-focusing. In this paper, we report an initial cross-check of ex-situ and in-situ metrology of a bendable temperature stabilized KB mirror. This cross-check provides a validation of the in-situ shearing interferometry currently under development at the ALS.

Yuan, Sheng Sam; Goldberg, Kenneth A.; Yashchuk, Valeriy V.; Celestre, Richard; McKinney, Wayne R.; Morrison, Gregory; Macdougall, James; Mochi, Iacopo; Warwick, Tony

2010-09-15T23:59:59.000Z

351

Research on fusion neutron sources  

SciTech Connect (OSTI)

The use of fusion devices as powerful neutron sources has been discussed for decades. Whereas the successful route to a commercial fusion power reactor demands steady state stable operation combined with the high efficiency required to make electricity production economic, the alternative approach to advancing the use of fusion is free of many of complications connected with the requirements for economic power generation and uses the already achieved knowledge of Fusion physics and developed Fusion technologies. 'Fusion for Neutrons' (F4N), has now been re-visited, inspired by recent progress achieved on comparably compact fusion devices, based on the Spherical Tokamak (ST) concept. Freed from the requirement to produce much more electricity than used to drive it, a fusion neutron source could be efficiently used for many commercial applications, and also to support the goal of producing energy by nuclear power. The possibility to use a small or medium size ST as a powerful or intense steady-state fusion neutron source (FNS) is discussed in this paper in comparison with the use of traditional high aspect ratio tokamaks. An overview of various conceptual designs of compact fusion neutron sources based on the ST concept is given and they are compared with a recently proposed Super Compact Fusion Neutron Source (SCFNS), with major radius as low as 0.5 metres but still able to produce several MW of neutrons in a steady-state regime.

Gryaznevich, M. P. [Tokamak Solutions UK, Culham Science Centre, Abingdon, OXON, OX133DB (United Kingdom)

2012-06-19T23:59:59.000Z

352

Off-set stabilizer for comparator output  

DOE Patents [OSTI]

A stabilized off-set voltage is input as the reference voltage to a comparator. In application to a time-interval meter, the comparator output generates a timing interval which is independent of drift in the initial voltage across the timing capacitor. A precision resistor and operational amplifier charge a capacitor to a voltage which is precisely offset from the initial voltage. The capacitance of the reference capacitor is selected so that substantially no voltage drop is obtained in the reference voltage applied to the comparator during the interval to be measured.

Lunsford, James S. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

353

Stability of fluid-loaded structures  

E-Print Network [OSTI]

for the following non-dimensional fluid/plate parameters: ? = 0?05? ? = 2 & ? = ? = 0?respectively, of a point scatterer or drive point.2) ?? ? ? ? ??: Neutral stability. Four propagating waves, two of which arepositive energy waves (PEWs: ?+1 and ??1 ) and two... are negative energy waves ( NEWs:?+2 and ??2 ), as shown in figure 2.3c. Wave energy, which will be defined more formallyin the next chapter, is the amount of work done to build up a wave from rest. Positiveenergy waves (PEWs) have positive Ďactivation energy...

Arzoumanian, Sevag Hrair

2011-06-07T23:59:59.000Z

354

Global optimization for the phase stability problem  

SciTech Connect (OSTI)

The Gibbs tangent plane criterion is an important tool in determining the quality of obtained solutions to the phase and chemical equilibrium problem. The ability to determine if a postulated solution is thermodynamically stable is very useful in the search for the equilibrium solution. In this work simpler formulations are presented for the phase stability problem where non-ideal liquid phases are modeled using the NRTL and UNIQUAC models. It is shown how the global minimum of the tangent plane distance function can be obtained. Computational results demonstrate the efficiency of the proposed global optimization algorithms.

Floudas, C.; McDonald, C.

1994-12-31T23:59:59.000Z

355

Ceramic membranes with enhanced thermal stability  

DOE Patents [OSTI]

A method of creating a ceramic membrane with enhanced thermal stability is disclosed. The method involves combining quantities of a first metal alkoxide with a second metal, the quantities selected to give a preselected metal ratio in the resultant membrane. A limited amount of water and acid is added to the combination and stirred until a colloidal suspension is formed. The colloid is dried to a gel, and the gel is fired at a temperature greater than approximately 400.degree. C. The porosity and surface area of ceramic membranes formed by this method are not adversely affected by this high temperature firing.

Anderson, Marc A. (Madison, WI); Xu, Qunyin (Plainsboro, NJ); Bischoff, Brian L. (Madison, WI)

1993-01-01T23:59:59.000Z

356

Criterion of stability of the superconducting state  

E-Print Network [OSTI]

In this paper, we propose to draw attention to the stability criterion of the superconductor current state. We use for this purpose the rough systems mathematical apparatus allowing us to relate the desired criterion with the dielectric permittivity of the matter and to identify the type of all possible phonons trajectories in its superconducting state. The state of superconductivity in the matter can be explained only by the phonons behavior peculiarity. And on the basis of the above-mentioned assumption, the corresponding mathematical model is constructed.

Iogann Tolbatov

2009-10-23T23:59:59.000Z

357

Nonparametric Tests of Moment Condition Stability  

E-Print Network [OSTI]

are interested in whether or not ? is constant. To reformulate it into an inference problem of moment stability, let zt = (yt , x#4;t )#4; and m(zt ,?) = ( yt ? x#4;t ? ) xt . Then, under the null hypothesis that ? is constant, the moment condition (2.1) holds... for all t . Otherwise, for any vector ? of constants, E(m(zt ,?)) #5;= 0 for some nonnegligible fraction of the sample. Most studies in the literature consider the case where the distribution of xt is assumed to be stationary. Furthermore, we may allow...

Juhl, Ted P.; Xiao, Zhijie

2013-02-01T23:59:59.000Z

358

Stability, Higgs Boson Mass and New Physics  

E-Print Network [OSTI]

When the particle with mass $\\sim 126$ GeV discovered at LHC is identified with the Higgs boson of the Standard Model, intriguing and challenging questions arise. Among them, the issue of the EW vacuum stability. We find that, despite claims to the contrary, the latter strongly depends on new physics interactions. In particular, if $\\tau$ is the lifetime of the EW vacuum, new physics can turn $\\tau$ from $\\tau >> T_U$ to $\\tau << T_U$, where $T_U$ is the age of the Universe.

Vincenzo Branchina; Emanuele Messina

2014-05-27T23:59:59.000Z

359

Stabilizing feedback controls for quantum systems  

E-Print Network [OSTI]

No quantum measurement can give full information on the state of a quantum system; hence any quantum feedback control problem is neccessarily one with partial observations, and can generally be converted into a completely observed control problem for an appropriate quantum filter as in classical stochastic control theory. Here we study the properties of controlled quantum filtering equations as classical stochastic differential equations. We then develop methods, using a combination of geometric control and classical probabilistic techniques, for global feedback stabilization of a class of quantum filters around a particular eigenstate of the measurement operator.

Mazyar Mirrahimi; Ramon van Handel

2005-11-10T23:59:59.000Z

360

Oxygen stabilized zirconium-vanadium-iron alloy  

DOE Patents [OSTI]

An oxygen stabilized intermetallic compound having the formula (Zr.sub.1-x Ti.sub.x).sub.2-u (V.sub.1-y Fe.sub.y)O.sub.z where x=0.0 to 0.9, y=0.01 to 0.9, z=0.25 to 0.5 and u=0 to 1. The compound is capable of reversibly sorbing hydrogen at temperatures from -196.degree. C. to 200.degree. C. at pressures down to 10.sup.-6 torr. The compound is suitable for use as a hydrogen getter in low pressure, high temperature applications such as magnetic confinement fusion devices.

Mendelsohn, Marshall H. (Woodridge, IL); Gruen, Dieter M. (Downers Grove, IL)

1982-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Uv-Light Stabilization Additive Package For Solar Cell Module And Laminated Glass Applications  

DOE Patents [OSTI]

An ultraviolet light stabilization additive package is used in an encapsulant material that may be used in solar cell modules, laminated glass and a variety of other applications. The ultraviolet light stabilization additive package comprises a first hindered amine light stabilizer and a second hindered amine light stabilizer. The first hindered amine light stabilizer provides thermal oxidative stabilization, and the second hindered amine light stabilizer providing photo-oxidative stabilization.

Hanoka, Jack I. (Brookline, MA); Klemchuk, Peter P. (Watertown, CT)

2002-03-05T23:59:59.000Z

362

Miniature x-ray source  

DOE Patents [OSTI]

A miniature x-ray source utilizing a hot filament cathode. The source has a millimeter scale size and is capable of producing broad spectrum x-ray emission over a wide range of x-ray energies. The miniature source consists of a compact vacuum tube assembly containing the hot filament cathode, an anode, a high voltage feedthru for delivering high voltage to the cathode, a getter for maintaining high vacuum, a connector for initial vacuum pump down and crimp-off, and a high voltage connection for attaching a compact high voltage cable to the high voltage feedthru. At least a portion of the vacuum tube wall is fabricated from highly x-ray transparent materials, such as sapphire, diamond, or boron nitride.

Trebes, James E. (Livermore, CA); Bell, Perry M. (Tracy, CA); Robinson, Ronald B. (Modesto, CA)

2000-01-01T23:59:59.000Z

363

Miniature x-ray source  

DOE Patents [OSTI]

A miniature x-ray source capable of producing broad spectrum x-ray emission over a wide range of x-ray energies. The miniature x-ray source comprises a compact vacuum tube assembly containing a cathode, an anode, a high voltage feedthru for delivering high voltage to the anode, a getter for maintaining high vacuum, a connection for an initial vacuum pump down and crimp-off, and a high voltage connection for attaching a compact high voltage cable to the high voltage feedthru. At least a portion of the vacuum tube wall is highly x-ray transparent and made, for example, from boron nitride. The compact size and potential for remote operation allows the x-ray source, for example, to be placed adjacent to a material sample undergoing analysis or in proximity to the region to be treated for medical applications.

Trebes, James E. (Livermore, CA); Stone, Gary F. (Livermore, CA); Bell, Perry M. (Tracy, CA); Robinson, Ronald B. (Modesto, CA); Chornenky, Victor I. (Minnetonka, MN)

2002-01-01T23:59:59.000Z

364

Compact portable electric power sources  

SciTech Connect (OSTI)

This report provides an overview of recent advances in portable electric power source (PEPS) technology and an assessment of emerging PEPS technologies that may meet US Special Operations Command`s (SOCOM) needs in the next 1--2- and 3--5-year time frames. The assessment was performed through a literature search and interviews with experts in various laboratories and companies. Nineteen PEPS technologies were reviewed and characterized as (1) PEPSs that meet SOCOM requirements; (2) PEPSs that could fulfill requirements for special field conditions and locations; (3) potentially high-payoff sources that require additional R and D; and (4) sources unlikely to meet present SOCOM requirements. 6 figs., 10 tabs.

Fry, D.N.; Holcomb, D.E.; Munro, J.K.; Oakes, L.C.; Matson, M.J.

1997-02-01T23:59:59.000Z

365

SOURCE PHENOMENOLOGY EXPERIMENTS IN ARIZONA  

SciTech Connect (OSTI)

The Arizona Source Phenomenology Experiments (SPE) have resulted in an important dataset for the nuclear monitoring community. The 19 dedicated single-fired explosions and multiple delay-fired mining explosions were recorded by one of the most densely instrumented accelerometer and seismometer arrays ever fielded, and the data have already proven useful in quantifying confinement and excitation effects for the sources. It is very interesting to note that we have observed differences in the phenomenology of these two series of explosions resulting from the differences between the relatively slow (limestone) and fast (granodiorite) media. We observed differences at the two SPE sites in the way the rock failed during the explosions, how the S-waves were generated, and the amplitude behavior as a function of confinement. Our consortium's goal is to use the synergy of the multiple datasets collected during this experiment to unravel the phenomenological differences between the two emplacement media. The data suggest that the main difference between single-fired chemical and delay-fired mining explosion seismograms at regional distances is the increased surface wave energy for the latter source type. The effect of the delay-firing is to decrease the high-frequency P-wave amplitudes while increasing the surface wave energy because of the longer source duration and spall components. The results suggest that the single-fired explosions are surrogates for nuclear explosions in higher frequency bands (e.g., 6-8 Hz Pg/Lg discriminants). We have shown that the SPE shots, together with the mining explosions, are efficient sources of S-wave energy, and our next research stage is to postulate the possible sources contributing to the shear-wave energy.

Jessie L. Bonner; Brian Stump; Mark Leidig; Heather Hooper; Xiaoning (David) Yang; Rongmao Zhou; Tae Sung Kim; William R. Walter; Aaron Velasco; Chris Hayward; Diane Baker; C. L. Edwards; Steven Harder; Travis Glenn; Cleat Zeiler; James Britton; James F. Lewkowicz

2005-09-30T23:59:59.000Z

366

A global sourcing strategy for durable tooling  

E-Print Network [OSTI]

Competitive pressures in manufacturing industries have led to an increased utilization of strategic sourcing initiatives: among them is low cost sourcing. While low cost sourcing has been used extensively for direct ...

Vasovski, Steven

2006-01-01T23:59:59.000Z

367

Source selection of agricultural journalists in Texas  

E-Print Network [OSTI]

Journalists rely on sources in their daily routines, and the sources they choose affect news content over time. Agricultural journalists are no exception. Eleven agricultural journalists in Texas were studied to determine what types of sources...

Banks, Penelope Jean

1998-01-01T23:59:59.000Z

368

MODELING, SIMULATION AND OPTIMIZATION OF GROUND SOURCE  

E-Print Network [OSTI]

MODELING, SIMULATION AND OPTIMIZATION OF GROUND SOURCE HEAT PUMP SYSTEMS By MUHAMMAD HAIDER KHAN AND OPTIMIZATION OF GROUND SOURCE HEAT PUMP SYSTEMS Thesis Approved..................................................................................................................... 1 1.1 Overview of Ground Source Heat Pump Systems.............................................. 1 1

369

Major Source Permits (District of Columbia)  

Broader source: Energy.gov [DOE]

The District reviews designs for new pollution sources and design modifications for existing sources. Permits are issued to allow sources to emit limited and specified amounts of pollution as...

370

4th Generation ECR Ion Sources  

E-Print Network [OSTI]

4th Generation ECR Ion Sources Claude M Lyneis, D. Leitner,to developing a 4 th generation ECR ion source with an RFover current 3 rd generation ECR ion sources, which operate

Lyneis, Claude M.

2010-01-01T23:59:59.000Z

371

High flux isotope reactor cold source preconceptual design study report  

SciTech Connect (OSTI)

In February 1995, the deputy director of Oak Ridge National Laboratory (ORNL) formed a group to examine the need for upgrades to the High Flux Isotope Reactor (HFIR) system in light of the cancellation of the Advanced Neutron Source Project. One of the major findings of this study was that there was an immediate need for the installation of a cold neutron source facility in the HFIR complex. The anticipated cold source will consist of a cryogenic LH{sub 2} moderator plug, a cryogenic pump system, a refrigerator that uses helium gas as a refrigerant, a heat exchanger to interface the refrigerant with the hydrogen loop, liquid hydrogen transfer lines, a gas handling system that includes vacuum lines, and an instrumentation and control system to provide constant system status monitoring and to maintain system stability. The scope of this project includes the development, design, safety analysis, procurement/fabrication, testing, and installation of all of the components necessary to produce a working cold source within an existing HFIR beam tube. This project will also include those activities necessary to transport the cold neutron beam to the front face of the present HFIR beam room. The cold source project has been divided into four phases: (1) preconceptual, (2) conceptual design and research and development (R and D), (3) detailed design and procurement, and (4) installation and operation. This report marks the conclusion of the preconceptual phase and establishes the concept feasibility. The information presented includes the project scope, the preliminary design requirements, the preliminary cost and schedule, the preliminary performance data, and an outline of the various plans for completing the project.

Selby, D.L.; Bucholz, J.A.; Burnette, S.E. [and others

1995-12-01T23:59:59.000Z

372

Phase I Source Investigation, Heckathorn Superfund Site, Richmond, California  

SciTech Connect (OSTI)

This report represents Phase I of a multi-phase approach to a source investigation of DDT at the Heckathorn Superfund Site, Richmond, California, the former site of a pesticide packaging plant, and the adjacent waterway, the Lauritzen Channel. Potential identified sources of contamination were from sloughed material from undredged areas (such as side banks) and from outfall pipes. Objectives of Phase I included the (1) evaluation of pesticide concentrations associated with discharge from outfalls, (2) identification of additional outfalls in the area, (3) identification of type, quantity, and distribution of sediment under the Levin pier, (4) quantification of pesticide concentrations in sediment under the pier, and (5) evaluation of sediment structure and slope stability under the pier. Field operations included the collection of sediment directly from inside the mouths of outfall pipes, when possible, or the deployment of specially designed particle traps where direct sampling was problematic. Passive water samplers were placed at the end of known outfall pipes and analyzed for DDT and other pesticides of concern. Underwater dive surveys were conducted beneath the Levin pier to document type, slope, and thickness of sediment. Samples were collected at locations of interest and analyzed for contaminants. Also sampled was soil from bank areas, which were suspected of potentially contributing to continued DDT contamination of the Lauritzen Channel through erosion and groundwater leaching. The Phase I Source Investigation was successful in identifying significant sources of DDT contamination to Lauritzen Channel sediment. Undredged sediment beneath the Levin pier that has been redistributed to the channel is a likely source. Two outfalls tested bear further investigation. Not as well-defined are the contributions of bank erosional material and groundwater leaching. Subsequent investigations will be based on the results of this first phase.

Kohn, Nancy P.; Evans, Nathan R.

2002-12-18T23:59:59.000Z

373

Interactions of a Stabilized Radion and Duality  

E-Print Network [OSTI]

We determine the couplings of the graviscalar radion in Randall-Sundrum models to Standard Model fields propagating in the bulk of the space, taking into account effects arising from the dynamics of the Goldberger-Wise scalar that stabilizes the size of the extra dimension. The leading corrections to the radion couplings are shown to arise from direct contact interactions between the Goldberger-Wise scalar and the Standard Model fields. We obtain a detailed interpretation of the results in terms of the holographic dual of the radion, the dilaton. In doing so, we determine how the familiar identification of the parameters on the two sides of the AdS/CFT correspondence is modified in the presence of couplings of the bulk Standard Model fields to the Goldberger-Wise scalar. We find that corrections to the form of the dilaton couplings from effects associated with the stabilization of the extra dimension are suppressed by the square of the ratio of the dilaton mass to the Kaluza-Klein scale, in good agreement with results from the CFT side of the correspondence.

Zackaria Chacko; Rashmish K. Mishra; Daniel Stolarski; Christopher B. Verhaaren

2014-11-13T23:59:59.000Z

374

ITER MHD stability analysis. Final report  

SciTech Connect (OSTI)

This report summarizes the final results and conclusions from work done for ITER under the DOE Task 18 (Raytheon Task ITER-GA 4002E). The work was performed in collaboration with D. Pearlstein and R. Bulmer of the Lawrence Livermore National Laboratory (LLNL), in close conjunction with D. Boucher of the ITER Joint Central Team (JCT). The work was partly done at General Atomics in San Diego and partly at LLNL. Approximately eight hours per week were spent from August 1994 through June 1995, with a no-cost extension through December 1995. The report covers work on the ideal MHD stability analysis for the ITER TAC scenarios and DIII-D ITER Demonstration Discharges, code modifications performed in order to efficiently and accurately complete the stability calculations, and additional collaborative efforts involving code benchmarking and dissemination of the DIII-D ITER Demonstration Discharge data. The work spawned several presentations and reports, including significant contributions to published IAEA Proceedings, and these are also summarized. 8 refs., 9 figs.

Turnbull, A.D.

1996-05-01T23:59:59.000Z

375

Thermal stability of hexagonal OsB2  

SciTech Connect (OSTI)

The synthesis of novel hexagonal ReB2-type OsB2 ceramic powder was performed by high energy ball milling of elemental Os and B powders. Two different sources of B powder have been used for this mechanochemical synthesis. One B powder consisted of a mixture of amorphous and crystalline phases and a mixture of 10B and 11B isotopes with a fine particle size, while another B powder was a purely crystalline (rhombohedral) material consisting of enriched 11B isotope with coarse particle size. The same Os powder was used for the synthesis in both cases. It was established that, in the first case, the hexagonal OsB2 phase was the main product of synthesis with a small quantity of Os2B3 phase present after synthesis as an intermediate product. In the second case, where coarse crystalline 11B powder was used as a raw material, only Os2B3 boride was synthesized mechanochemically. The thermal stability of hexagonal OsB2 powder was studied by heating under argon up to 876 C and cooling in vacuo down to 225 C. During the heating, the sacrificial reaction 2OsB2+3O2 2Os+2B2O3 took place due to presence of O2/water vapor molecules in the heating chamber, resulting in the oxidation of B atoms and formation of B2O3 and precipitation of Os metal out of the OsB2 lattice. As a result of such phase changes during heating, the lattice parameters of hexagonal OsB2 changed significantly. The shrinkage of the a lattice parameter was recorded in 276 426 C temperature range upon heating, which was attributed to the removal of B atoms from the OsB2 lattice due to oxidation followed by the precipitation of Os atoms and formation of Os metal. While significant structural changes occurred upon heating due to presence of O2, the hexagonal OsB2 ceramic demonstrated good phase stability upon cooling in vacuo with linear shrinkage of the lattice parameters and no phase changes detected during cooling.

Xie, Zhilin [University of Central Florida; Blair, Richard G. [University of Central Florida; Orlovskaya, Nina [University of Central Florida; Cullen, David A [ORNL; Payzant, E Andrew [ORNL

2014-01-01T23:59:59.000Z

376

Alternative Energy Sources - An Interdisciplinary Module for...  

Broader source: Energy.gov (indexed) [DOE]

Alternative Energy Sources - An Interdisciplinary Module for Energy Education Alternative Energy Sources - An Interdisciplinary Module for Energy Education Below is information...

377

Mercury Effects, Sources and Control Measures  

E-Print Network [OSTI]

Mercury Effects, Sources and Control Measures Prepared by Alan B. Jones, Brooks Rand, Ltd., Seattle ................................................................................................................................1 MERCURY SOURCES....................................................................................................................................................................................8 Mercury dumping from naval vessels

378

RECENT PROGRESS IN HEAVY ION SOURCES  

E-Print Network [OSTI]

of hydrogen into thermonuclear fusion reactors. A summary ofFusion Plasma Sources Other sources of high charge state ions include the dense plasma in magnetic confinement thermonuclear

Clark, D.J.

2010-01-01T23:59:59.000Z

379

Micro optical fiber light source and sensor and method of fabrication thereof  

DOE Patents [OSTI]

This invention relates generally to the development of and a method of fabricating a fiber optic micro-light source and sensor (50). An optical fiber micro-light source (50) is presented whose aperture is extremely small yet able to act as an intense light source. Light sources of this type have wide ranging applications, including use as micro-sensors (22) in NSOM. Micro-sensor light sources have excellent detection limits as well as photo stability, reversibility, and millisecond response times. Furthermore, a method for manufacturing a micro optical fiber light source is provided. It involves the photo-chemical attachment of an optically active material onto the end surface of an optical fiber cable which has been pulled to form an end with an extremely narrow aperture. More specifically, photopolymerization has been applied as a means to photo-chemically attach an optically active material (60). This process allows significant control of the size of the micro light source (50). Furthermore, photo-chemically attaching an optically active material (60) enables the implementation of the micro-light source in a variety of sensor applications.

Kopelman, Raoul (Ann Arbor, MI); Tan, Weihong (Ames, IA); Shi, Zhong-You (Ann Arbor, MI)

1997-01-01T23:59:59.000Z

380

Micro optical fiber light source and sensor and method of fabrication thereof  

DOE Patents [OSTI]

This invention relates generally to the development of and a method of fabricating a micro optical fiber light source. An optical fiber micro-light source is presented whose aperture is extremely small yet able to act as an intense light source. Light sources of this type have wide ranging applications, including use as micro-sensors in NSOM. Micro-sensor light sources have excellent detection limits as well as photo stability, reversibility, and millisecond response times. Furthermore, a method for manufacturing a micro optical fiber light source is provided. It involves the photo-chemical attachment of an optically active material onto the end surface of an optical fiber cable which has been pulled to form an end with an extremely narrow aperture. More specifically, photopolymerization has been applied as a means to photo-chemically attach an optically active material. This process allows significant control of the size of the micro light source. Furthermore, photo-chemically attaching an optically active material enables the implementation of the micro-light source in a variety of sensor applications.

Kopelman, Raoul (Ann Arbor, MI); Tan, Weihong (Ann Arbor, MI); Shi, Zhong-You (Ann Arbor, MI)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Micro optical fiber light source and sensor and method of fabrication thereof  

DOE Patents [OSTI]

This invention relates generally to the development of and a method of fabricating a micro optical fiber light source. An optical fiber micro-light source is presented whose aperture is extremely small yet able to act as an intense light source. Light sources of this type have wide ranging applications, including use as micro-sensors in NSOM. Micro-sensor light sources have excellent detection limits as well as photo stability, reversibility, and millisecond response times. Furthermore, a method for manufacturing a micro optical fiber light source is provided. It involves the photo-chemical attachment of an optically active material onto the end surface of an optical fiber cable which has been pulled to form an end with an extremely narrow aperture. More specifically, photopolymerization has been applied as a means to photo-chemically attach an optically active material. This process allows significant control of the size of the micro light source. Furthermore, photo-chemically attaching an optically active material enables the implementation of the micro-light source in a variety of sensor applications. 4 figs.

Kopelman, R.; Tan, W.; Shi, Z.Y.

1994-11-01T23:59:59.000Z

382

Micro optical fiber light source and sensor and method of fabrication thereof  

DOE Patents [OSTI]

This invention relates generally to the development of and a method of fabricating a fiber optic micro-light source and sensor. An optical fiber micro-light source is presented whose aperture is extremely small yet able to act as an intense light source. Light sources of this type have wide ranging applications, including use as micro-sensors in NSOM. Micro-sensor light sources have excellent detection limits as well as photo stability, reversibility, and millisecond response times. Furthermore, a method for manufacturing a micro optical fiber light source is provided. It involves the photo-chemical attachment of an optically active material onto the end surface of an optical fiber cable which has been pulled to form an end with an extremely narrow aperture. More specifically, photopolymerization has been applied as a means to photo-chemically attach an optically active material. This process allows significant control of the size of the micro light source. Furthermore, photo-chemically attaching an optically active material enables the implementation of the micro-light source in a variety of sensor applications. 10 figs.

Kopelman, R.; Tan, W.; Shi, Z.Y.

1997-05-06T23:59:59.000Z

383

Lesson 2: Energy Sources Overview  

E-Print Network [OSTI]

Earth's internal heat; ­solar energy from the Sun; ­gravitaDonal energy · There are three sources of external energy: ­ solar energy: radiant energy from and some is converted to tsunami #12;Overview · Solar Energy: ­ Of the three

Chen, Po

384

Known and unknown SCUBA sources  

E-Print Network [OSTI]

Summary and discussion of some projects to use SCUBA to target sources selected at other wavebands, as well as to find new sub-mm galaxies in `blank fields': FIRBACK galaxies; Lyman break galaxies and `the Blob'; HDF flanking fields and the Groth Strip; survey of lensing cluster fields.

Douglas Scott; Colin Borys; Mark Halpern; Anna Sajina; Scott Chapman; Greg Fahlman

2000-10-25T23:59:59.000Z

385

Focused X-ray source  

DOE Patents [OSTI]

Disclosed is an intense, relatively inexpensive X-ray source (as compared to a synchrotron emitter) for technological, scientific, and spectroscopic purposes. A conical radiation pattern produced by a single foil or stack of foils is focused by optics to increase the intensity of the radiation at a distance from the conical radiator. 8 figs.

Piestrup, M.A.; Boyers, D.G.; Pincus, C.I.; Maccagno, P.

1990-08-21T23:59:59.000Z

386

Reporting of Radioactive Sealed Sources  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish U.S. Department of Energy requirements for inventory reporting, transaction reporting, verification of reporting, and assign responsibilities for reporting of radioactive sealed sources. DOE N 251.86 extends this notice until 5-6-11. No cancellations. Canceled by DOE O 231.1B

2008-02-27T23:59:59.000Z

387

EAT SMART Sources: Heart Health  

E-Print Network [OSTI]

-1- EAT SMART Sources: Heart Health American Dietetic Association Complete Food and Nutrition Guide and Promotion; Home and Garden Bulletin Number 252; August 1992. Heart Attach Signs, U.S. Department of Health and Human Services: National Institutes of Heart, Lung, and Blood Institute, NIH Publication No. 01

388

National Synchrotron Light Source II  

ScienceCinema (OSTI)

The National Synchrotron Light Source II (NSLS-II) at the U.S. Department of Energy's Brookhaven National Laboratory is a proposed new state-of-the-art medium energy storage ring designed to deliver world-leading brightness and flux with top-off operation

Steve Dierker

2010-01-08T23:59:59.000Z

389

6, 61256181, 2006 Sources and  

E-Print Network [OSTI]

and transport mechanisms of the pollutants accurately. Mexico City has a large urban fleet in a topographically of the emission inventory, verification of transport processes in air quality models and guidance for policy for the Mexico City Metropolitan Area 6126 #12;ACPD 6, 6125­6181, 2006 Sources and transport of CO and SO2

Boyer, Edmond

390

MIT inverse Compton source concept  

E-Print Network [OSTI]

A compact X-ray source based on inverse Compton scattering of a high-power laser on a high-brightness linac beam is described. The facility can operate in two modes: at high (MHz) repetition rate with flux and brilliance ...

Graves, William S.

391

Climate Change Major information sources  

E-Print Network [OSTI]

://www.ipcc.ch/ Vital Climate Graphics, at http://www.grida.no/climate/vital/ Climate Change Impacts on US, at http://www.gcrio.org/NationalAssessment/ Greenhouse Warming Prediction #12;Energy Predictions 2 Sources: Energy Information Administration (EIA); International Energy Agency (IEA) 2% growth per year, or doubling in 35 years (shortcut: 70/%=doubling) Fossil

392

The stability of spectroscopic instruments: A unified Allan variance computation scheme  

E-Print Network [OSTI]

The Allan variance is a standard technique to characterise the stability of spectroscopic instruments used in astronomical observations. The period for switching between source and reference measurement is often derived from the Allan minimum time. We propose a new approach for the computation of the Allan variance of spectrometer data combining the advantages of the two existing methods into a unified scheme. Using the Allan variance spectrum we derive the optimum strategy for symmetric observing schemes minimising the total uncertainty of the data resulting from radiometric and drift noise. The unified Allan variance computation scheme is designed to trace total-power and spectroscopic fluctuations within the same framework. The method includes an explicit error estimate both for the individual Allan variance spectra and for the derived stability time. A new definition of the instrument stability time allows to characterise the instrument even in the case of a fluctuation spectrum shallower than 1/f, as measured for the total power fluctuations in high-electron-mobility transistors. We find a non-linear impact of the binning of spectrometer channels on the resulting noise and the Allan time deviating from the description in existing theoretical treatments.

Volker Ossenkopf

2007-12-28T23:59:59.000Z

393

RESEARCH ARTICLE Interpolation approximation of voltage stability  

E-Print Network [OSTI]

) for reactive power planning Wenjuan Zhang1,2 , Fangxing Li1* and Leon M. Tolbert1,3 1 Department of Electrical.S.A. ABSTRACT Reactive power planning (RPP), or Var planning, is to identify the optimal size and location of reactive power sources. In this paper, first, the previous work using least square method to simplify

Tolbert, Leon M.

394

Miniaturized cathodic arc plasma source  

DOE Patents [OSTI]

A cathodic arc plasma source has an anode formed of a plurality of spaced baffles which extend beyond the active cathode surface of the cathode. With the open baffle structure of the anode, most macroparticles pass through the gaps between the baffles and reflect off the baffles out of the plasma stream that enters a filter. Thus the anode not only has an electrical function but serves as a prefilter. The cathode has a small diameter, e.g. a rod of about 1/4 inch (6.25 mm) diameter. Thus the plasma source output is well localized, even with cathode spot movement which is limited in area, so that it effectively couples into a miniaturized filter. With a small area cathode, the material eroded from the cathode needs to be replaced to maintain plasma production. Therefore, the source includes a cathode advancement or feed mechanism coupled to cathode rod. The cathode also requires a cooling mechanism. The movable cathode rod is housed in a cooled metal shield or tube which serves as both a current conductor, thus reducing ohmic heat produced in the cathode, and as the heat sink for heat generated at or near the cathode. Cooling of the cathode housing tube is done by contact with coolant at a place remote from the active cathode surface. The source is operated in pulsed mode at relatively high currents, about 1 kA. The high arc current can also be used to operate the magnetic filter. A cathodic arc plasma deposition system using this source can be used for the deposition of ultrathin amorphous hard carbon (a-C) films for the magnetic storage industry.

Anders, Andre (Albany, CA); MacGill, Robert A. (Richmond, CA)

2003-04-15T23:59:59.000Z

395

Litt om evolusjonr spillteori. 1. ESS: Evolusjonrt Stabile Strategier  

E-Print Network [OSTI]

Litt om evolusjon√¶r spillteori. 1. ESS: Evolusjon√¶rt Stabile Strategier I klassisk spillteori har konstant i tid. Sp√łrsm¬įalet er om man kan si noe om denne (stabile) strategifordelingen. 1.1. ESS. La v√¶re av befolk- ningen. Vi sier at p er en Evolusjon√¶rt Stabil Strategi (ESS) hvis p ikke kan bli invadert

L√łw, Erik

396

Evaluation of the performance of polypropylene fibers on soil stabilization  

E-Print Network [OSTI]

, Chattanooga, TN 37416. Its product name is "Fibergrids". These are one inch long 1000 denier fibers having a specific gravity of 0. 91. Sand (SM) was stabilized with type I portland cement and clay (CL) was stabilized with lime. Moisture-Density tests... of soil aggregates, especially when small contents of chemical stabilizer (portland cement or lime) was added and the stress-strain curves for these composites have increased post cracking ductility which is an important property where there is impact...

Sangineni, Srinivas Meherji

1992-01-01T23:59:59.000Z

397

"Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECSPropaneResidential"Total"2.4 Relative4 Relative2

398

"Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)"  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECSPropaneResidential"Total"2.4 Relative4 Relative22

399

Elucidating the Higher Stability of Vanadium (V) Cations in Mixed...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Elucidating the Higher Stability of Vanadium (V) Cations in Mixed Acid Based Redox Flow Battery Electrolytes. Abstract: The Vanadium (V) cation structures in mixed acid based...

400

Nonrelativistic hydrogen type stability problems on nonparabolic 3-manifolds  

E-Print Network [OSTI]

We extend classical Euclidean stability theorems corresponding to the nonrelativistic Hamiltonians of ions with one electron to the setting of non parabolic Riemannian 3-manifolds.

Batu GŁneysu

2012-03-19T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Advanced Oxidation & Stabilization of PAN-Based Carbon Precursor...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. lm04paulauskas.pdf More Documents & Publications Advanced Oxidation & Stabilization of...

402

A STABILIZED MODEL AND AN EFFICIENT SOLUTION METHOD ...  

E-Print Network [OSTI]

1. Introduction. Given a fixed mix of electric power plants (nuclear, thermal, hydroelectric and possibly peak ... the stabilized method on numerical simulations. 2.

2011-01-28T23:59:59.000Z

403

Injectivity and stability for a generic class of generalized Radon ...  

E-Print Network [OSTI]

then show injectivity and stability for an open, dense subset of smooth generalized ... are found in applications to many other fields, including harmonic analysis,.

2014-12-15T23:59:59.000Z

404

Stability estimates for the hyperbolic Dirichlet to Neumann map in ...  

E-Print Network [OSTI]

In this paper we consider the question of stability, that is, whether if two Dirichlet to .... associated to two metrics are the same to conclude that the harmonic†...

405

Biophysical Studies of Protein Folding and Binding Stability.  

E-Print Network [OSTI]

?? Interactions between charged residues are known to have significant effects on protein folding stability and binding properties. The contributions of different types of non-covalentÖ (more)

Batra, Jyotica

2009-01-01T23:59:59.000Z

406

attentional stability neural: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the Stability Region of a Neural Network with a General Distribution of Delays R Campbell, Sue Ann 38 A neural oscillator model of binaural auditory selective attention...

407

Optimization Online - On the Dynamic Stability of Electricity Markets  

E-Print Network [OSTI]

Jan 31, 2011 ... On the Dynamic Stability of Electricity Markets. Victor M. Zavala (vzavala ***at*** mcs.anl.gov) Mihai Anitescu (anitescu ***at*** mcs.anl.gov).

Victor M. Zavala

2011-01-31T23:59:59.000Z

408

PH/sub 3/ treatment for polymer stabilization  

DOE Patents [OSTI]

Polymers are stabilized against oxidative degradation by treatment with phosphine gas. The treatment can be used in situ on polymeric components already in use.

Not Available

1982-07-20T23:59:59.000Z

409

activity state stability: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

screened for compounds containing the pharmacophore. Forty-seven compounds resulted from Marshall, Garland R. 5 Stability and Activation Gaps of Parafermionic Hall States in the...

410

Elliptically Bent X-ray Mirrors with Active Temperature Stabilization  

E-Print Network [OSTI]

stabilization based on a Peltier element attached directlyof the mirror with a Peltier element attached directly tostabilization based on a Peltier element have shown a

Yuan, Sheng

2010-01-01T23:59:59.000Z

411

Nevada 2012: Budget Stability and Hope for Improvement  

E-Print Network [OSTI]

Guy (2011) ďRuling Bites Budget Plans,Ē Reno Gazette-University of Utah. Budget Stability and Hope forBureau (2010) Revenue and Budget. Carson City, Nevada:

Morin, Robert P.

2013-01-01T23:59:59.000Z

412

Stabilizing coal-water mixtures with Portland cement  

DOE Patents [OSTI]

Coal-water mixes stabilized by the addition of Portland cement which may additionally contain retarding carbohydrates, or borax are described. 1 tab.

Steinberg, M.; Krishna, C.R.

1984-10-17T23:59:59.000Z

413

apolipoprotein stabilized nanodisk: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

stability wrt measurement error) Then can achieve GAS Assume: s.t. 12; Liberzon, Daniel 49 A Novel Function of Apolipoprotein E: Upregulation of ATP-Binding Cassette...

414

Stabilized Lithium Metal Powder, Enabling Material and Revolutionary...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation es011yakovleva2011p.pdf More Documents & Publications Stabilized...

415

On the Difficulty of Deciding Asymptotic Stability of Cubic ...  

E-Print Network [OSTI]

to other families of nonlinear dynamics. The problem of deciding stability of ... Science, Massachusetts Institute of Technology. E-mail: a a a@mit.edu. The origin†...

2011-12-04T23:59:59.000Z

416

The robust stabilization problem for discrete-time descriptor systems  

E-Print Network [OSTI]

Sep 23, 2014 ... Abstract: We investigate the robust stabilization problem for the descriptor discrete-time systems and build an optimal solution in the case when†...

Claudiu Dinicu

2014-09-23T23:59:59.000Z

417

Mesoscale Quantization and Self-Organized Stability  

E-Print Network [OSTI]

In the world of technology, one of the most important forms of friction is that of rolling friction. Yet it is one of the least studied of all the known forms of energy dissipation. In the present experiments we investigate the oscillatory free-decay of a rigid cube, whose side-length is less than the diameter of the rigid cylinder on which it rests. The resulting free-decay is one of harmonic motion with damping. The non-dissipative character of the oscillation yields to a linear differential equation; however, the damping is found to involve more than a deterministic nonlinearity. Dominated by rolling friction, the damping is sensitive to the material properties of the contact surfaces. For `clean' surfaces of glass on glass, the decay shows features of mesoscale quantization and self-organized stability.

Randall D. Peters

2005-06-16T23:59:59.000Z

418

Quantum mechanical stabilization of Minkowski signature wormholes  

SciTech Connect (OSTI)

When one attempts to construct classical wormholes in Minkowski signature Lorentzian spacetimes violations of both the weak energy hypothesis and averaged weak energy hypothesis are encountered. Since the weak energy hypothesis is experimentally known to be violated quantum mechanically, this suggests that a quantum mechanical analysis of Minkowski signature wormholes is in order. In this note I perform a minisuperspace analysis of a simple class of Minkowski signature wormholes. By solving the Wheeler-de Witt equation for pure Einstein gravity on this minisuperspace the quantum mechanical wave function of the wormhole is obtained in closed form. The wormhole is shown to be quantum mechanically stabilized with an average radius of order the Planck length. 8 refs.

Visser, M.

1989-05-19T23:59:59.000Z

419

Stability of Quantum Fluids : Wavy Interface Effect  

E-Print Network [OSTI]

A numerical investigation for the stability of the incompressible slip flow of normal quantum fluids (above the critical phase transition temperature) inside a microslab where surface acoustic waves propagate along the walls is presented. Governing equations and associated slip velocity and wavy interface boundary conditions for the flow of normal fluids confined between elastic wavy interfaces are obtained. The numerical approach is an extension (with a complex matrix pre-conditioning) of the spectral method. We found that the critical Reynolds number ($Re_{cr}$ or the critical velocity) decreases significantly once the slip velocity and wavy interface effects are present and the latter is dominated ($Re_{cr}$ mainly depends on the wavy interfaces).

A. Kwang-Hua Chu

2005-08-31T23:59:59.000Z

420

Process converts incineration slag into stabilized residue  

SciTech Connect (OSTI)

During 1973 and 1974, EMC-Services designed and built a physico-chemical treatment plant in Hombourg, in France's Alsatian region. The plant is still in operation. Since then, EMC-Services has developed substantial experience in environmental projects, becoming one of the top companies internationally with experience and practice in designing, building and operating hazardous waste treatment plants. EMC-Services operates in France in Salaise, Strasbourg, Mitry-Mory, and Saint-Vulbas, where eight incinerators treat solid, liquid, highly halogenated and nonhazardous industrial waste. The incinerators, built or updated by EMC-Services, have a total capacity of about 200,000 tons per year. In the new process, incineration of special industrial wastes produces non-volatilized solid residue or slag, which is sent for disposal, in compliance with regulations, to special disposal plants. Future European regulations will incorporate landfilling criteria requiring such slag to be stabilized.

Thauront, J.; Deneux-Mustin, S. (EMC-Services, Paris (France)); Durecu, S. (EMC-Services, Vandoeuvre-Les Nancy (France)); Fraysse, G. (EMC-Services, Saint-Vulbas (France)); Berthelin, J. (Centre de Pedologie Biologique, Vandoeuvre-Les Nancy (France))

1994-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Nonlinear Elasticity of Flow-Stabilized Solids  

E-Print Network [OSTI]

Thermal fluctuations, geometric exclusion, and external driving all govern the mechanical response of dense particulate suspensions. Here, we measure the stress-strain response of quasi-two-dimensional flow-stabilized microsphere heaps in a regime in which all three effects are present using a microfluidic device. We observe that the elastic modulus and the mean interparticle separation of the heaps are tunable via the confining stress provided by the fluid flow. Furthermore, the measured stress-strain curves exhibit a universal nonlinear shape which can be predicted from a thermal van der Waals equation of state with excluded volume. This analysis indicates that many-body interactions contribute a significant fraction of the stress supported by the heap.

Carlos P. Ortiz; Karen E. Daniels; Robert Riehn

2014-07-20T23:59:59.000Z

422

Method of electroplating a conversion electron emitting source on implant  

DOE Patents [OSTI]

Methods for preparing an implant coated with a conversion electron emitting source (CEES) are disclosed. The typical method includes cleaning the surface of the implant; placing the implant in an activating solution comprising hydrochloric acid to activate the surface; reducing the surface by H.sub.2 evolution in H.sub.2SO.sub.4 solution; and placing the implant in an electroplating solution that includes ions of the CEES, HCl, H.sub.2SO.sub.4, and resorcinol, gelatin, or a combination thereof. Alternatively, before tin plating, a seed layer is formed on the surface. The electroplated CEES coating can be further protected and stabilized by annealing in a heated oven, by passivation, or by being covered with a protective film. The invention also relates to a holding device for holding an implant, wherein the device selectively prevents electrodeposition on the portions of the implant contacting the device.

Srivastava, Suresh C. (Setauket, NY); Gonzales, Gilbert R. (New York, NY); Adzic, Radoslav (East Setauket, NY); Meinken, George E. (Middle Island, NY)

2012-02-14T23:59:59.000Z

423

Gravity Role in Classical Electrodynamics of Charged Point Source  

E-Print Network [OSTI]

This paper deals with the problem of a point-like charged source under the influence of the external electromagnetic field in terms of perturbation theory for GR equations. It is obtained that GR, in contrast with the classical electrodynamics, in linear perturbation theory predicts an unlimited growth of the dipole perturbation. It is shown that the reason for this unlimited perturbation growth might be related to the presence of the unstable rotational perturbation mode. The analysis of the conditions under which this instability may disappear is performed. The momentum value at which the stability is reached is estimated. These estimations give the electron spin by the order of magnitude (when charge value is equal to elementary one).

M. B. Golubev

1999-07-14T23:59:59.000Z

424

Low-energy dc ion source for low operating pressure  

SciTech Connect (OSTI)

We report on an experimental study of an ion source based on a Penning discharge with a cold hollow cathode in crossed electric and magnetic fields. The minimum vacuum chamber operating pressure was 3 ◊ 10{sup ?5} Torr for argon and 5 ◊ 10{sup ?5} Torr for hydrogen. The use of a hollow cathode allowed decreasing the discharge operating voltage down to 350 V at a discharge current of ?100 mA. At a discharge current of 100 mA and beam accelerating voltage of 2 kV, the ion current was 2.5 mA for argon and 8 mA for hydrogen, and the ion beam on-axis current density 170 and 450 ?A/cm{sup 2}, respectively. The current-voltage characteristics of the discharge and the radial ion beam current density distribution were measured. The influence of pressure on the discharge parameters and their time stability was investigated.

Oks, Efim, E-mail: oks@opee.hcei.tsc.ru [Institute of High Current Electronics, Russian Academy of Sciences, Akademichesky ave. 2/3, Tomsk 634055 (Russian Federation); State University of Control Systems and Radioelectronics, 40 Lenin Ave., Tomsk 634050 (Russian Federation); Shandrikov, Maxim [Institute of High Current Electronics, Russian Academy of Sciences, Akademichesky ave. 2/3, Tomsk 634055 (Russian Federation); Salvadori, Cecilia [Institute of Physics, University of S„o Paulo, C.P. 66318, CEP 05315-970 S„o Paulo S.P. (Brazil); Brown, Ian [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720 (United States)

2014-08-15T23:59:59.000Z

425

National Synchrotron Light Source Activity Report 1998  

SciTech Connect (OSTI)

National Synchrotron Light Source Activity Report for period October 1, 1997 through September 30, 1998

Rothman, Eva

1999-05-01T23:59:59.000Z

426

Best Management Practice #14: Alternate Water Sources  

Broader source: Energy.gov [DOE]

Many federal facilities may have water uses that can be met with non-potable water from alternate water sources. Potentially available alternative water sources for Federal sources include municipal-supplied reclaimed water, treated gray water from on-site sanitary sources, and storm water.

427

National Synchrotron Light Source annual report 1991  

SciTech Connect (OSTI)

This report contains abstracts from research conducted at the national synchrotron light source. (LSP)

Hulbert, S.L.; Lazarz, N.N. (eds.)

1992-04-01T23:59:59.000Z

428

Best Management Practice #14: Alternative Water Sources  

Broader source: Energy.gov [DOE]

Many federal facilities may have water uses that can be met with non-potable water from alternative water sources. Potentially available alternative water sources for Federal sources include municipal-supplied reclaimed water, treated gray water from on-site sanitary sources, and storm water.

429

Landfill stabilization focus area: Technology summary  

SciTech Connect (OSTI)

Landfills within the DOE Complex as of 1990 are estimated to contain 3 million cubic meters of buried waste. The DOE facilities where the waste is predominantly located are at Hanford, the Savannah River Site (SRS), the Idaho National Engineering Laboratory (INEL), the Los Alamos National Laboratory (LANL), the Oak Ridge Reservation (ORR), the Nevada Test Site (NTS), and the Rocky Flats Plant (RFP). Landfills include buried waste, whether on pads or in trenches, sumps, ponds, pits, cribs, heaps and piles, auger holes, caissons, and sanitary landfills. Approximately half of all DOE buried waste was disposed of before 1970. Disposal regulations at that time permitted the commingling of various types of waste (i.e., transuranic, low-level radioactive, hazardous). As a result, much of the buried waste throughout the DOE Complex is presently believed to be contaminated with both hazardous and radioactive materials. DOE buried waste typically includes transuranic-contaminated radioactive waste (TRU), low-level radioactive waste (LLW), hazardous waste per 40 CFR 26 1, greater-than-class-C waste per CFR 61 55 (GTCC), mixed TRU waste, and mixed LLW. The mission of the Landfill Stabilization Focus Area is to develop, demonstrate, and deliver safer,more cost-effective and efficient technologies which satisfy DOE site needs for the remediation and management of landfills. The LSFA is structured into five technology areas to meet the landfill remediation and management needs across the DOE complex. These technology areas are: assessment, retrieval, treatment, containment, and stabilization. Technical tasks in each of these areas are reviewed.

NONE

1995-06-01T23:59:59.000Z

430

Brane Stabilization and Regionality of Extra Dimensions  

E-Print Network [OSTI]

Extra dimensions are a common feature of beyond the Standard Model physics. In a braneworld scenario, local physics on the brane can depend strongly on the brane's location within the bulk. Generically, the relevant properties of the bulk manifold for the physics on/of the brane are neither local nor global, but depend on the structure of finite regions of the bulk, even for locally homogeneous and isotropic bulk geometries. In a recent work, various mechanisms (in a braneworld context) were considered to stabilize the location of a brane within bulk spaces of non-trivial topology. In this work we elaborate on and generalize that work by considering additional bulk and brane dimensionalities as well as different boundary conditions on the bulk scalar field that provides a Casimir force on the brane, providing further insight on this effect. In D=2+1 (D=5+1) we consider both local and global contributions to the effective potential of a 1-brane (4-brane) wrapped around both the 2-dimensional hyperbolic horn and Euclidean cone, which are used as toy models of an extra-dimensional manifold. We calculate the total energy due to brane tension and elastic energy (extrinsic curvature) as well as that due to the Casimir energy of a bulk scalar satisfying both Dirchlet and Neumann boundary conditions on the brane. In some cases stable minima of the potential are found that result from the competition of at least two of the contributions. Generically, any one of these effects may be sufficient when the bulk space has less symmetry than the manifolds considered here. We highlight the importance of the Casimir effect for the purpose of brane stabilization.

David M. Jacobs; Glenn D. Starkman; Andrew J. Tolley

2014-10-19T23:59:59.000Z

431

Beam-based Feedback for the Linac Coherent Light Source  

SciTech Connect (OSTI)

Beam-based feedback control loops are required by the Linac Coherent Light Source (LCLS) program in order to provide fast, single-pulse stabilization of beam parameters. Eight transverse feedback loops, a 6 x 6 longitudinal feedback loop, and a loop to maintain the electron bunch charge were successfully prototyped in MATLAB for the LCLS, and have been maintaining stability of the LCLS electron beam at beam rates up to 30Hz. In the final commissioning phase of LCLS the beam will be operating at up to 120Hz. In order to run the feedback loops at beam rate, the feedback loops will be implemented in EPICS IOCs with a dedicated ethernet multi-cast network. This paper will discuss the design of the beam-based Fast Feedback System for LCLS. Topics include MATLAB feedback prototyping, algorithm for 120Hz feedback, network design for fast data transport, actuator and sensor design for single-pulse control and sensor readback, and feedback configuration and runtime control.

Fairley, D.; Allison, S.; Chevtsov, S.; Chu, P.; Decker, F.J.; Emma, P.; Frisch, J.; Himel, T.; Kim, K.; Krejcik, P.; Loos, H.; Lahey, T.; Natampalli, P.; Peng, S.; Rogind, D.; Shoaee, H.; Straumann, T.; Williams, E.; White, G.; Wu, J.; Zelazney, M.; /SLAC

2010-02-11T23:59:59.000Z

432

X-ray lithography source  

DOE Patents [OSTI]

A high-intensity, inexpensive X-ray source for X-ray lithography for the production of integrated circuits is disclosed. Foil stacks are bombarded with a high-energy electron beam of 25 to 250 MeV to produce a flux of soft X-rays of 500 eV to 3 keV. Methods of increasing the total X-ray power and making the cross section of the X-ray beam uniform are described. Methods of obtaining the desired X-ray-beam field size, optimum frequency spectrum and eliminating the neutron flux are all described. A method of obtaining a plurality of station operation is also described which makes the process more efficient and economical. The satisfying of these issues makes transition radiation an excellent moderate-priced X-ray source for lithography. 26 figures.

Piestrup, M.A.; Boyers, D.G.; Pincus, C.

1991-12-31T23:59:59.000Z

433

X-ray lithography source  

DOE Patents [OSTI]

A high-intensity, inexpensive X-ray source for X-ray lithography for the production of integrated circuits. Foil stacks are bombarded with a high-energy electron beam of 25 to 250 MeV to produce a flux of soft X-rays of 500 eV to 3 keV. Methods of increasing the total X-ray power and making the cross section of the X-ray beam uniform are described. Methods of obtaining the desired X-ray-beam field size, optimum frequency spectrum and elminating the neutron flux are all described. A method of obtaining a plurality of station operation is also described which makes the process more efficient and economical. The satisfying of these issues makes transition radiation an exellent moderate-priced X-ray source for lithography.

Piestrup, Melvin A. (Woodside, CA); Boyers, David G. (Mountain View, CA); Pincus, Cary (Sunnyvale, CA)

1991-01-01T23:59:59.000Z

434

Thermal stability of diesel fuels by quantitative gravimetric JFTOT  

SciTech Connect (OSTI)

The current worldwide standard test method for assessing thermal stability of jet turbine aviation fuels is the ASTM D3241 method. This method generates a visual tube deposit rating which is not quantitative, but assumes that very dark colors equate to unstable fuels. The tube rating is coded against color standards and the darkest color is usually said to fail a fuel for use in jet turbine engines/fuel systems. The method also generates a semi-quantitative filter pressure drop. The pressure drop is so semi-quantitative that it also is afforded a pass/fail criterion for fuel acceptance in jet aircraft. In 1991, we described the construction of a test device which duplicated all of the experimentally important parameters of the D3241 method but which substituted a weighable 302 stainless steel (s/s) foil strip for the bulky tube, so that direct weighing of thermal surface deposits could be made. In addition, the nominal 17 micron (dutch weave) s/s filter of the D3241 was substituted with a nylon membrane 0.8 micron filter which was also capable of direct weighing of the fuel entrained solids generated by the test. In subsequent papers, the use of this device for generating a large data base of results based on aviation fuels from many different refinery processes and many different geographic/crude sources was described. In addition this new device, dubbed the gravimetric jet fuel total oxidation tester (JFTOT) after the original ASTM D3241 device, was also used to assess quantitatively the effects of temperature, pressure, and fuel flow in addition to the effects of dissolved metals and various fuel additives. This paper describes the JFTOT test for the analysis of middle distillate diesel fuels.

Beal, E.J.; Hardy, D.R. [Naval Research Laboratory, Washington, DC (United States)

1994-12-31T23:59:59.000Z

435

Far-infrared Point Sources  

E-Print Network [OSTI]

The analysis of the submm anisotropies that will be mapped by the forthcoming MAP and PLANCK satellites requires careful foreground subtraction before measuring CMB fluctuations. Among these, the foreground due to IR/submm thermal radiation from dusty sources was poorly known until recent observational breakthroughs began unveiling the properties of these objects. We hereafter briefly review the observational evidence for a strong evolution of IR/submm sources with respect to the local universe explored by IRAS. We present the basic principles of a new modeling effort where consistent spectral energy distributions of galaxies are implemented into the paradigm of hierarchical clustering with the fashionable semi-analytic approach. This model provides us with specific predictions in IR/submm wavebands, that seem to reproduce the current status of the observations and help assessing the capabilities of forthcoming instruments to pursue the exploration of the deep universe at IR/submm wavelengths. Finally, the ability of the PLANCK High Frequency Instrument all-sky survey to produce a catalogue of dusty sources at submm wavelengths is briefly described.

B. Guiderdoni

1999-03-08T23:59:59.000Z

436

Stability in MaVaN Models  

E-Print Network [OSTI]

Mass-varying neutrino (MaVaN) models propose a source of dark energy in a new scalar field called the acceleron. Recent work has shown that nonrelativistic neutrino fields in these theories are unstable to inhomogeneous fluctuations, and form structures that no longer behave as dark energy. One might expect that in multiple-neutrino models, the lighter species could continue to act as a source for the acceleron, generating dark energy without the help of heavier species. This paper shows that by considering the evolution of the acceleron field for a large class of models, the result of any neutrino component becoming unstable is that all components become unstable within a short time on cosmological scales. An alternate model employing a second scalar field in a hybrid potential is shown to have stable MaVaN dark energy even in the presence of unstable heavier components.

Christopher Spitzer

2006-06-26T23:59:59.000Z

437

Characteristics and storage stability of sorghum extrudates  

E-Print Network [OSTI]

are precooking and gelatinization of the starch, providing a desired shape to the product, and giving the food an expanded, crisp, and pleasing characteristic (Harper, 1981). Starch products from a number of generic sources are currently being used in snack..., 1970; Sacharow, 1974; 1976). Cabral et al. (1979) examined the keeping quality of potato chips, when different packaging films were used. Under accelerated condi- tions, products packed in OPP, K Cello/OPP, and metallized polyester (IIPET) pouches...

Cheng, Tai-Yau

1982-01-01T23:59:59.000Z

438

UNDERSTANDING FORCES THAT CONTRIBUTE TO PROTEIN STABILITY: APPLICATION FOR INCREASING PROTEIN STABILITY  

E-Print Network [OSTI]

Page 1 Ribbon diagram showing the structure of VHP and VlsE ......................... 12 2 Far-UV CD spectra for VHP and VlsE ...................................................... 13 3 Energy diagrams for protein folding reaction... interactions, hydrogen bonding and hydrophobic effect. The stabilizing effects of these interactions are largely opposed by the major destabilizing force, which is the conformational entropy loss upon protein folding. Other forces, such as electrostatic...

Fu, Hailong

2010-07-14T23:59:59.000Z

439

Compact x-ray source and panel  

DOE Patents [OSTI]

A compact, self-contained x-ray source, and a compact x-ray source panel having a plurality of such x-ray sources arranged in a preferably broad-area pixelized array. Each x-ray source includes an electron source for producing an electron beam, an x-ray conversion target, and a multilayer insulator separating the electron source and the x-ray conversion target from each other. The multi-layer insulator preferably has a cylindrical configuration with a plurality of alternating insulator and conductor layers surrounding an acceleration channel leading from the electron source to the x-ray conversion target. A power source is connected to each x-ray source of the array to produce an accelerating gradient between the electron source and x-ray conversion target in any one or more of the x-ray sources independent of other x-ray sources in the array, so as to accelerate an electron beam towards the x-ray conversion target. The multilayer insulator enables relatively short separation distances between the electron source and the x-ray conversion target so that a thin panel is possible for compactness. This is due to the ability of the plurality of alternating insulator and conductor layers of the multilayer insulators to resist surface flashover when sufficiently high acceleration energies necessary for x-ray generation are supplied by the power source to the x-ray sources.

Sampayon, Stephen E. (Manteca, CA)

2008-02-12T23:59:59.000Z

440

Asymptotic Stability of Heteroclinic Cycles in Systems with Symmetry, II  

E-Print Network [OSTI]

Asymptotic Stability of Heteroclinic Cycles in Systems with Symmetry, II Martin Krupa #3; Ian heteroclinic cycles that persist under perturbations that respect the symmetry. In previous work, we began a system- atic investigation into the asymptotic stability of such cycles. In particular, we found a su

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Stabilization of tokamak plasma by lithium streams L. E. Zakharov,  

E-Print Network [OSTI]

a stabilization mechanism independent of the plasma properties. 2. Interaction of lithium streams with externalStabilization of tokamak plasma by lithium streams L. E. Zakharov, Princeton Plasma Physics-boundary magnetohydrodynamic instabilities in tokamaks by liquid lithium streams driven by magnetic propulsion is formulated

442

Stabilization of tokamak plasma by lithium streams L. E. Zakharov,  

E-Print Network [OSTI]

a stabilization mechanism independent of the plasma properties. 2 Interaction of lithium streams with externalStabilization of tokamak plasma by lithium streams L. E. Zakharov, Princeton Plasma Physics-boundary magnetohydrodynamic instabilities in tokamaks by liquid lithium streams driven by magnetic propulsion is formulated

Zakharov, Leonid E.

443

ON THE ACOUSTIC SINGLE LAYER POTENTIAL: STABILIZATION AND FOURIER ANALYSIS  

E-Print Network [OSTI]

ON THE ACOUSTIC SINGLE LAYER POTENTIAL: STABILIZATION AND FOURIER ANALYSIS A. BUFFA AND S. SAUTER in the stability and convergence estimates attains its minumum. Key words. Acoustic scattering, Galerkin boundary discretizations for the Helmholtz problem suffer from the pollution effect, i.e., the constants in the Galerkin

Buffa, Annalisa

444

Initial assessment of the MHD stability of TMX-U  

SciTech Connect (OSTI)

In its operation to date TMX-U has reached values of beta which, for all except the hot electron beta, are close to the proposal values and has not encountered MHD stability problems. The hot electron beta values are presently limited by gyrotron output power and pulse length as well as ion confinement time. Further exploration of stability awaits full thermal barrier operation.

Nexsen, W.E.

1983-08-04T23:59:59.000Z

445

A New Environmentally Friendly AL/ZR-Based Clay Stabilizer  

E-Print Network [OSTI]

Clay stabilizers are means to prevent fines migration and clay swelling, which are caused by the contact of formation with low salinity or high pH brines at high temperature. Previous clay stabilizers including: Al and Zr compounds and cationic...

El-Monier, Ilham Abdallah

2013-01-18T23:59:59.000Z

446

Morphology and thermal conductivity of yttria-stabilized zirconia coatings  

E-Print Network [OSTI]

yttria-stabilized zir- conia (YSZ) is then applied to provide thermal insulation [1]. This ceramic layer]. The thermal conductivity of the ceramic layer has been found to depend on the pore morphology within a coatingMorphology and thermal conductivity of yttria-stabilized zirconia coatings Hengbei Zhao a

Wadley, Haydn

447

Spin-stabilized magnetic levitation without vertical axis of rotation  

DOE Patents [OSTI]

The symmetry properties of a magnetic levitation arrangement are exploited to produce spin-stabilized magnetic levitation without aligning the rotational axis of the rotor with the direction of the force of gravity. The rotation of the rotor stabilizes perturbations directed parallel to the rotational axis.

Romero, Louis (Albuquerque, NM); Christenson, Todd (Albuquerque, NM); Aaronson, Gene (Albuquerque, NM)

2009-06-09T23:59:59.000Z

448

Dynamical stability of Minkowski space in higher order gravity  

E-Print Network [OSTI]

We discuss the Minkowski stability problem in modified gravity by using dynamical system approach. The method to investigate dynamical stability of Minkowski space was proposed. This method was applied for a some modified gravity theories, such as $f(R)$ gravity, $f(R)+\\alpha R\\Box R$ gravity and scalar-tensor gravity models with non-minimal kinetic coupling.

Petr Tretyakov

2014-07-15T23:59:59.000Z

449

Electronic Structure and Stability of Semiconducting Graphene Nanoribbons  

E-Print Network [OSTI]

Electronic Structure and Stability of Semiconducting Graphene Nanoribbons Vero¬īnica Barone, Oded stability of semiconducting graphene nanoribbons. We consider ribbons with different edge nature including band structure of graphene (a single infinite sheet of graphite). Depending on their chirality

Hod, Oded

450

The Role of Energy Storage for Mini-Grid Stabilization  

E-Print Network [OSTI]

The Role of Energy Storage for Mini-Grid Stabilization Report IEA-PVPS T11-02:2011 hal-00802927 Program The role of energy storage for mini-grid stabilization IEA PVPS Task 11 Report IEA-PVPS T11 Foreword 5 Executive Summary 7 1 Introduction 10 2 Scope of the study 14 3 The role of energy storage

Boyer, Edmond

451

HTS Conductor Design Issues Including Quench and Stability,  

E-Print Network [OSTI]

/background · Stability and protection are crucial issues for HTS tapes and coils applied to electric power devices. ­Both for the economic argument for HTS AC applications like cables and transformers. · Conductor design is importantHTS Conductor Design Issues Including Quench and Stability, AC Losses, and Fault Currents M. J

452

Fundamental studies of fluid mechanics and stability in porous media  

SciTech Connect (OSTI)

This report summarizes accomplished and proposed work for the fundamental studies of fluid mechanics and stability in porous media. Topics discussed include: viscous fingering in miscible displacements; polymer flow interactions in free shear layers of viscoelastic fluids; effect of nonmonotonic viscosity profiles on the stability of miscible displacements in porous media; and references. (JL)

Homsy, G.M.

1991-08-01T23:59:59.000Z

453

Characterization and stabilization of arsenic in water treatment residuals  

E-Print Network [OSTI]

-arsenic compounds. However, it is suggested that the ordinary Portland cement (OPC) should be added with the lime for the long term stabilization because lime can be slowly consumed when directly exposed to atmospheric CO2. The solidification and stabilization (S...

Wee, Hun Young

2004-11-15T23:59:59.000Z

454

Stabilization of a purely dipolar quantum gas against collapse  

E-Print Network [OSTI]

statistical effect that also appears in an ideal gas, the physics of Bose­Einstein condensates (BECs, stabilizing a purely dipolar quantum gas. In the case of a homogeneous Bose­Einstein condensate (BECLETTERS Stabilization of a purely dipolar quantum gas against collapse T. KOCH, T. LAHAYE, J. METZ

Loss, Daniel

455

Stability of vortex solitons in a photorefractive optical lattice  

E-Print Network [OSTI]

://www.njp.org/ DOI: 10.1088/1367-2630/6/1/047 Abstract. Stability of on- and off-site vortex solitons with unit stable than off-site ones. Increasing the DC field stabilizes both types of vortex solitons. Contents 1. Introduction 2 2. Off-site vortex solitons 4 3. On-site vortex solitons 9 4. Summary 11 Acknowledgments 11

Yang, Jianke

456

STABILIZING LINEAR MPC WITH EFFICIENT PRIORITIZED INFEASIBILITY HANDLING  

E-Print Network [OSTI]

is illustrated on a simulated distillation column, and we present a novel stability result for this infeasibilitySTABILIZING LINEAR MPC WITH EFFICIENT PRIORITIZED INFEASIBILITY HANDLING Jostein Vada Olav predictive controller fails to compute a control input, all practical MPC implementations should havea means

Foss, Bjarne A.

457

HYBRID SYSTEMS: GENERALIZED SOLUTIONS AND ROBUST STABILITY 1  

E-Print Network [OSTI]

HYBRID SYSTEMS: GENERALIZED SOLUTIONS AND ROBUST STABILITY 1 Rafal Goebel Joao Hespanha Andrew R asymptotic stability for hybrid systems is considered. For this purpose, a generalized solution concept is developed. The first step is to characterize a hybrid time domain that permits an efficient description

Goebel, Rafal

458

Vacuum stability of asymptotically safe gauge-Yukawa theories  

E-Print Network [OSTI]

We study the phase diagram and the stability of the ground state for certain four-dimensional gauge-Yukawa theories whose high-energy behaviour is controlled by an interacting fixed point. We also provide analytical and numerical results for running couplings, their crossover scales, the separatrix, and the Coleman-Weinberg effective potential. Classical and quantum stability of the vacuum is established.

Litim, Daniel F; Sannino, Francesco

2015-01-01T23:59:59.000Z

459

Detecting fission from special nuclear material sources  

DOE Patents [OSTI]

A neutron detector system for discriminating fissile material from non-fissile material wherein a digital data acquisition unit collects data at high rate, and in real-time processes large volumes of data directly into information that a first responder can use to discriminate materials. The system comprises counting neutrons from the unknown source and detecting excess grouped neutrons to identify fission in the unknown source. The system includes a graphing component that displays the plot of the neutron distribution from the unknown source over a Poisson distribution and a plot of neutrons due to background or environmental sources. The system further includes a known neutron source placed in proximity to the unknown source to actively interrogate the unknown source in order to accentuate differences in neutron emission from the unknown source from Poisson distributions and/or environmental sources.

Rowland, Mark S. (Alamo, CA); Snyderman, Neal J. (Berkeley, CA)

2012-06-05T23:59:59.000Z

460

Small (5 million Btu/h) and large (300 million Btu/h) thermal test rigs for coal and coal slurry burner development  

SciTech Connect (OSTI)

NEI International Combustion Ltd. of Derby, England, now operates two thermal test rigs for the development of burners capable of handling coal-water slurries (CWS). A general description of the large rig and its capacity was given. Also, the necessary conversions of the equipment to handle CWS were described. Information on the properties of the CWS was included. This consisted of chemical analysis of the parent coal and the slurry, sieve analysis of a dry sample, and viscosity versus temperature data of the CWS. The process of design development of the burner was outlined. Ten illustrations were presented, including schematic diagrams of equipment and graphs of data.

Allen, J.W.; Beal, P.R.; Hufton, P.F.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Multigamma-ray calibration sources  

SciTech Connect (OSTI)

We have calibrated a self-consistent set of multigamma-ray standards using the automated multi-spectrometry ..gamma..-ray counting facility at LLNL's Nuclear Chemistry Division. Pure sources of long-lived activity were produced by mass separation and/or chemical purification. The sources were counted individually and in combination on several different calibrated spectrometer systems. These systems utilize various detectors ranging from small (x-ray) detectors to large volume high-purity Ge detectors. This has allowed the use of the most ideal individual detector-efficiency characteristics for the determination of the relative ..gamma..-ray intensities. Precise energy measurements, reported earlier (Meyer, 1976) have been performed by an independent method. Both the energy and ..gamma..-ray-emission probabilities determined compare well with independently established values such as the recent ICRM intercomparison of /sup 152/Eu. We discuss our investigations aimed at resolving the shape of the efficiency response function up to 10 MeV for large volume Ge(Li) and high-purity Ge detectors. Recent results on the ..gamma..-ray-emission probabilities per decay for /sup 149/Gd and /sup 168/Tm multigamma-ray sources are discussed. For /sup 168/Tm, we deduce a 0.01% ..beta../sup -/ branch to the 87.73-keV level in /sup 168/Yb rather than the previous value which was a factor of 200 greater. In addition, we describe current cooperative efforts aimed at establishing a consistent set of data for short-lived fission products. Included are recent measurements on the bromine fission products with ..gamma.. rays up to 7 MeV.

Meyer, R.A.; Massey, T.N.

1983-05-01T23:59:59.000Z

462

CHINA SPALLATION NEUTRON SOURCE DESIGN.  

SciTech Connect (OSTI)

The China Spallation Neutron Source (CSNS) is an accelerator-based high-power project currently in preparation under the direction of the Chinese Academy of Sciences (CAS). The complex is based on an H- linear accelerator, a rapid cycling proton synchrotron accelerating the beam to 1.6 GeV, a solid tungsten target station, and five initial instruments for spallation neutron applications. The facility will operate at 25 Hz repetition rate with a phase-I beam power of about 120 kW. The major challenge is to build a robust and reliable user's facility with upgrade potential at a fractional of ''world standard'' cost.

WEI,J.

2007-01-29T23:59:59.000Z

463

Gamma source for active interrogation  

DOE Patents [OSTI]

A cylindrical gamma generator includes a coaxial RF-driven plasma ion source and target. A hydrogen plasma is produced by RF excitation in a cylindrical plasma ion generator using an RF antenna. A cylindrical gamma generating target is coaxial with the ion generator, separated by plasma and extraction electrodes which has many openings. The plasma generator emanates ions radially over 360.degree. and the cylindrical target is thus irradiated by ions over its entire circumference. The plasma generator and target may be as long as desired.

Leung, Ka-Ngo; Lou, Tak Pui; Barletta, William A.

2012-10-02T23:59:59.000Z

464

Relating to monitoring ion sources  

DOE Patents [OSTI]

The apparatus and method provide techniques for monitoring the position on alpha contamination in or on items or locations. The technique is particularly applicable to pipes, conduits and other locations to which access is difficult. The technique uses indirect monitoring of alpha emissions by detecting ions generated by the alpha emissions. The medium containing the ions is moved in a controlled manner frog in proximity with the item or location to the detecting unit and the signals achieved over time are used to generate alpha source position information.

Orr, Christopher Henry (Calderbridge, GB); Luff, Craig Janson (Calderbridge, GB); Dockray, Thomas (Calderbridge, GB); Macarthur, Duncan Whittemore (Los Alamos, NM); Bounds, John Alan (Los Alamos, NM)

2002-01-01T23:59:59.000Z

465

Ion Sources - 88-Inch Cyclotron  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area.PortaldefaultIntroducing AuroraInvestorPagesSources

466

Repatriation of US sources from Brazil  

SciTech Connect (OSTI)

IAEA's interest in excess and unwanted sealed sources extends back to when radium sources were a problem throughout the world. Sta11ing in 1994, world wide IAEA member states inventoried and consolidated radium (Ra)-226 sources. IAEA then trained Regional Teams in the conditioning of Ra-226 sealed sources for long term storage, which resulted in the Regional Teams conditioning about 14,000 radium sources. These sources remained in their respective IAEA member state locations. Regional teams were seen as a way to encourage member state (local) management of a world wide problem, as well as a more cost effective solution.

Tompkins, Andrew J [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

467

Life and stability testing of packaged low-cost energy storage materials  

SciTech Connect (OSTI)

A low-cost laminated plastic film which is used to contain a Glauber's salt-based phase change thermal energy storage material in sausage-like containers called Chubs is discussed. The results of tests performed on the Chub packages themselves and on the thermal energy storage capacity of the packaged phase change material are described. From the test results, a set of specifications have been drawn up for a film material which will satisfactorily contain the phase change material under anticipated operating conditions. Calorimetric testing of the phase change material with thermal cycling indicates that a design capacity of 45 to 50 Btu/lb for a ..delta..T of 30/sup 0/F can be used for the packaged material.

Frysinger, G.R.

1980-07-01T23:59:59.000Z

468

Stability of eutectic interface during directional solidification  

SciTech Connect (OSTI)

Directional solidification of eutectic alloys shows different types of eutectic morphologies. These include lamellar, rod, oscillating and tilting modes. The growth of these morphologies occurs with a macroscopically planar interface. However, under certain conditions, the planar eutectic front becomes unstable and gives rise to a cellular or a dendritic structure. This instability leads to the cellular/dendritic structure of either a primary phase or a two-phase structure. The objective of this work is to develop a fundamental understanding of the instability of eutectic structure into cellular/dendritic structures of a single phase and of two-phases. Experimental studies have been carried out to examine the transition from a planar to two-phase cellular and dendritic structures in a ceramic system of Alumina-Zirconia (Al{sub 2}O{sub 3}-ZrO{sub 2}) and in a transparent organic system of carbon tetrabromide and hexachloroethane (CBr{sub 4}-C{sub 2}Cl{sub 6}). Several aspects of eutectic interface stability have been examined.

Han, S.H.

1996-04-23T23:59:59.000Z

469

Stability measurements of PPL atmospheric pressure arc  

SciTech Connect (OSTI)

Experiments on the stability of atmospheric pressure arcs have been started at PPL to understand and improve the performance of arc furnaces used for processing applications in metallurgy and hazardous waste treatment. Previous studies have suggested that the violent instabilities in such arcs may be due to kink modes. A 30 kW, 500 Amp CW DC experimental arc furnace was constructed with a graphite cathode and a molten steel anode. The arc plasma is diagnosed with 4000 frames/sec digital camera, Hall probes, and voltage and current monitors. Under certain conditions, the arc exhibits an intermittent helical instability, with the helix rotating at {approx}600 Hz. The nature of the instability is investigated. A possible instability mechanism is the self-magnetic field of the arc, with saturation occurring due to inhomogeneous heating in a helical arc. The effect of external DC and AC magnetic fields on the instability is investigated. Additionally, arc deflection due to external transverse magnetic field is investigated. The deflection angle is found to be proportional to the applied field, and is in good agreement with a simple model of the {rvec J} x {rvec b} force on the arc jet.

Roquemore, L.; Zweben, S.J. [Princeton Plasma Physics Lab., NJ (United States); Wurden, G.A. [Los Alamos National Lab., NM (United States)

1997-12-31T23:59:59.000Z

470

Thermal Stability of Chelated Indium Activable Tracers  

SciTech Connect (OSTI)

The thermal stability of indium tracer chelated with organic ligands ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) was measured for reservoir temperatures of 150, 200, and 240 C. Measurements of the soluble indium concentration was made as a function of time by neutron activation analysis. From the data, approximate thermal decomposition rates were estimated. At 150 C, both chelated tracers were stable over the experimental period of 20 days. At 200 C, the InEDTA concentration remained constant for 16 days, after which the thermal decomposition occurred at a measured rate constant of k = 0.09 d{sup -1}. The thermal decomposition of InNTA at 200 C showed a first order reaction with a measured rate constant of k = 0.16 d{sup -1}. At 240 C, both indium chelated tracers showed rapid decomposition with rate constants greater than 1.8 d{sup -1}. The data indicate that for geothermal reservoir with temperatures up to about 200 C, indium chelated tracers can be used effectively for transit times of at least 20 days. These experiments were run without reservoir rock media, and do not account for concomitant loss of indium tracer by adsorption processes.

Chrysikopoulos, Costas; Kruger, Paul

1986-01-21T23:59:59.000Z

471

Ferrocyanide tank waste stability. Supplement 2  

SciTech Connect (OSTI)

Ferrocyanide wastes were generated at the Hanford Site during the mid to late 1950s as a result of efforts to create more tank space for the storage of high-level nuclear waste. The ferrocyanide process was developed to remove {sup 137}CS from existing waste and newly generated waste that resulted from the recovery of valuable uranium in Hanford Site waste tanks. During the course of research associated with the ferrocyanide process, it was recognized that ferrocyanide materials, when mixed with sodium nitrate and/or sodium nitrite, were capable of violent exothermic reaction. This chemical reactivity became an issue in the 1980s, when safety issues associated with the storage of ferrocyanide wastes in Hanford Site tanks became prominent. These safety issues heightened in the late 1980s and led to the current scrutiny of the safety issues associated with these wastes, as well as current research and waste management programs. Testing to provide information on the nature of possible tank reactions is ongoing. This document supplements the information presented in Summary of Single-Shell Tank Waste Stability, WHC-EP-0347, March 1991 (Borsheim and Kirch 1991), which evaluated several issues. This supplement only considers information particular to ferrocyanide wastes.

Fowler, K.D.

1993-01-01T23:59:59.000Z

472

Chemical Stabilization of Hanford Tank Residual Waste  

SciTech Connect (OSTI)

Three different chemical treatment methods were tested for their ability to stabilize residual waste from Hanford tank C-202 for reducing contaminant release (Tc, Cr, and U in particular). The three treatment methods tested were lime addition [Ca(OH)2], an in-situ Ceramicrete waste form based on chemically bonded phosphate ceramics, and a ferrous iron/goethite treatment. These approaches rely on formation of insoluble forms of the contaminants of concern (lime addition and ceramicrete) and chemical reduction followed by co-precipitation (ferrous iron/goethite incorporation treatment). The results have demonstrated that release of the three most significant mobile contaminants of concern from tank residual wastes can be dramatically reduced after treatment compared to contact with simulated grout porewater without treatment. For uranium, all three treatments methods reduced the leachable uranium concentrations by well over three orders of magnitude. In the case of uranium and technetium, released concentrations were well below their respective MCLs for the wastes tested. For tank C-202 residual waste, chromium release concentrations were above the MCL but were considerably reduced relative to untreated tank waste. This innovative approach has the potential to revolutionize Hanfordís tank retrieval process, by allowing larger volumes of residual waste to be left in tanks while providing an acceptably low level of risk with respect to contaminant release that is protective of the environment and human health. Such an approach could enable DOE to realize significant cost savings through streamlined retrieval and closure operations.

Cantrell, Kirk J.; Um, Wooyong; Williams, Benjamin D.; Bowden, Mark E.; Gartman, Brandy N.; Lukens, Wayne W.; Buck, Edgar C.; Mausolf, Edward J.

2014-03-01T23:59:59.000Z

473

Fluid jet electric discharge source  

DOE Patents [OSTI]

A fluid jet or filament source and a pair of coaxial high voltage electrodes, in combination, comprise an electrical discharge system to produce radiation and, in particular, EUV radiation. The fluid jet source is composed of at least two serially connected reservoirs, a first reservoir into which a fluid, that can be either a liquid or a gas, can be fed at some pressure higher than atmospheric and a second reservoir maintained at a lower pressure than the first. The fluid is allowed to expand through an aperture into a high vacuum region between a pair of coaxial electrodes. This second expansion produces a narrow well-directed fluid jet whose size is dependent on the size and configuration of the apertures and the pressure used in the reservoir. At some time during the flow of the fluid filament, a high voltage pulse is applied to the electrodes to excite the fluid to form a plasma which provides the desired radiation; the wavelength of the radiation being determined by the composition of the fluid.

Bender, Howard A. (Ripon, CA)

2006-04-25T23:59:59.000Z

474

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement  

E-Print Network [OSTI]

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement Tempe AZ USA 85287 rajub@asu.edu, rao@asu.edu ABSTRACT One immediate challenge in searching the deep web-similarity-based relevance assess- ment. When applied to the deep web these methods have two deficiencies. First

Kambhampati, Subbarao

475

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement  

E-Print Network [OSTI]

SourceRank: Relevance and Trust Assessment for Deep Web Sources Based on Inter-Source Agreement. Existing methods have two deficiencies for applying to the open col- lections like the deep web. First query in the deep web, the agreements between theses an- swer sets are likely to be helpful in assessing

Kambhampati, Subbarao

476

Energy Information Administration / Annual Energy Outlook 2011  

Gasoline and Diesel Fuel Update (EIA)

3 Table A2. Energy Consumption by Sector and Source (Quadrillion Btu per Year, Unless Otherwise Noted) Sector and Source Reference Case Annual Grow th 2009-2035 (percent) 2008 2009...

477

Divergent subcritical convection in magnetized plasma from asymmetric sourcing  

SciTech Connect (OSTI)

Asymmetric particle and heat sourcing in a plasma confined in a closed magnetic field line configuration results in convection cells, as is well known. This phenomenon occurs even if the sourcing on average produces density and temperature profiles that are subcritical, i.e., magnetohydrodynamically stable to interchange modes. Such subcritical convection is expected to be small compared to the convection from supercritical driving for which the system is interchange unstable. The ratio of subcritical to supercritical convection is expected to scale as the inverse Reynolds numbers (for large Reynolds numbers). It is shown that this ratio is, in fact, considerably larger. As marginal stability is approached, the subcritical convection grows from very small to almost the unstable convection size, i.e., of order unity. This effect may be similar to why a driven, damped harmonic oscillator increases in amplitude as resonance is approached. A numerical simulation is done to demonstrate this effect. It is also shown that transport from the large convection can be substantial.

Adler, D.T.; Hassam, A.B. [Department of Physics, University of Maryland, College Park, Maryland 20742 (United States)

2005-06-15T23:59:59.000Z

478

Problems with packaged sources in foreign countries  

SciTech Connect (OSTI)

The Global Threat Reduction Initiative's (GTRI) Off-Site Source Recovery Project (OSRP), which is administered by the Los Alamos National Laboratory (LANL), removes excess, unwanted, abandoned, or orphan radioactive sealed sources that pose a potential threat to national security, public health, and safety. In total, GTRI/OSRP has been able to recover more than 25,000 excess and unwanted sealed sources from over 825 sites. In addition to transuranic sources, the GTRI/OSRP mission now includes recovery of beta/gamma emitting sources, which are of concern to both the U.S. government and the International Atomic Energy Agency (IAEA). This paper provides a synopsis of cooperative efforts in foreign countries to remove excess and unwanted sealed sources by discussing three topical areas: (1) The Regional Partnership with the International Atomic Energy Agency; (2) Challenges in repatriating sealed sources; and (3) Options for repatriating sealed sources.

Abeyta, Cristy L [Los Alamos National Laboratory; Matzke, James L [Los Alamos National Laboratory; Zarling, John [Los Alamos National Laboratory; Tompkin, J. Andrew [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

479

Dairy Biomass as a Renewable Fuel Source  

E-Print Network [OSTI]

biomass. This publication explains the properties of dairy manure that could make it an excellent source of fuel....

Mukhtar, Saqib; Goodrich, Barry; Engler, Cady; Capareda, Sergio

2008-03-19T23:59:59.000Z

480

The Political Economy of Open Source Software  

E-Print Network [OSTI]

Accidental Revolutionary. Sebastopol: O'Reilly Publishing,Open Source Revolution. Sebastopol: O'Reilly, 1999. p. 54).

Weber, Steven

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "btu stabilization source" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

North Village Ground Source Heat Pumps  

Broader source: Energy.gov [DOE]

Overview: Installation of Ground Source Heat Pumps. Replacement of Aging Heat Pumps. Alignment with Furmanźs Sustainability Goals.

482

DEVELOPMENT AND ON-LINE TESTS OF DIFFERENT TARGET-ION SOURCE UNITS FOR PRODUCTION OF NUCLIDES FAR FROM STABILITY  

E-Print Network [OSTI]

of the element chosen for the investigation, a special selection of a metal carbide target material is required as a general goal the development of a massive (up to 1 kg) uranium carbide target prototype for the third of neutron-rich and neutron-deficient heavy nuclei. The main line of uranium carbide target development

Titov, Anatoly

483

Josephson device with a matched rf source  

SciTech Connect (OSTI)

Analog simulation of a resistance-shunted ac Josephson junction coupled to an rf source with matching impedance reveals (1) added structure in the device's V-I curve even when the source is quiescent and (2) rf-induced steps with peak amplitudes between those produced by voltage and current rf sources. Both results are consistent with experimental data.

Longacre, A. Jr.

1980-03-01T23:59:59.000Z

484

Memorandum, Reporting of Radiological Sealed Sources Transactions  

Broader source: Energy.gov [DOE]

The requirements for reporting transactions involving radiological sealed sources are identified in Department of Energy (DOE) Notice (N) 234.1, Reporting of Radioactive Sealed Sources. The data reported in accordance with DOE N 234.1 are maintained in the DOE Radiological Source Registry and Tracking (RSRT) database by the Office of Information Management, within the Office of Environment, Health, Safety and Security.

485

Spallation Neutron Sources Around the World  

E-Print Network [OSTI]

Spallation Neutron Sources Around the World Bernie Riemer Thanks to others for the many shamelessly Laboratory #12;2 Managed by UT-Battelle for the U.S. Department of Energy Spallation Neutron Source Facilities Spallation Neutron Source Facilities Serve Neutron Science Programs · Neutron beams to suites

McDonald, Kirk

486

Assistant Deputy Executive Officer Mobile Source Division  

E-Print Network [OSTI]

sources, including all refineries and power plants Top NOx Emissions Sources in 2023 #12;Locomotive Light Duty Trucks/SUVs NOx(tons/day) * Oceangoing vessels = 32tons/day **RECLAIM: 320 largest stationary - Manufacturers may elect to meet a combined NOx+HC standard of 1.4 g/bhp-hr. Source: http://www.dieselnet.com/standards/us

California at Davis, University of

487

Fuel traps: mapping stability via water association.  

SciTech Connect (OSTI)

Hydrogen storage is a key enabling technology required for attaining a hydrogen-based economy. Fundamental research can reveal the underlying principles controlling hydrogen uptake and release by storage materials, and also aid in characterizing and designing novel storage materials. New ideas for hydrogen storage materials come from exploiting the properties of hydrophobic hydration, which refers to water s ability to stabilize, by its mode of association, specific structures under specific conditions. Although hydrogen was always considered too small to support the formation of solid clathrate hydrate structures, exciting new experiments show that water traps hydrogen molecules at conditions of low temperatures and moderate pressures. Hydrogen release is accomplished by simple warming. While these experiments lend credibility to the idea that water could form an environmentally attractive alternative storage compound for hydrogen fuel, which would advance our nation s goals of attaining a hydrogen-based economy, much work is yet required to understand and realize the full potential of clathrate hydrates for hydrogen storage. Here we undertake theoretical studies of hydrogen in water to establish a firm foundation for predictive work on clathrate hydrate H{sub 2} storage capabilities. Using molecular simulation and statistical mechanical theories based in part on quantum mechanical descriptions of molecular interactions, we characterize the interactions between hydrogen and liquid water in terms of structural and thermodynamic properties. In the process we validate classical force field models of hydrogen in water and discover new features of hydrophobic hydration that impact problems in both energy technology and biology. Finally, we predict hydrogen occupancy in the small and large cages of hydrogen clathrate hydrates, a property unresolved by previous experimental and theoretical work.

Rempe, Susan L.; Clawson, Jacalyn S.; Greathouse, Jeffery A.; Alam, Todd M; Leung, Kevin; Varma, Sameer; Sabo, Dubravko; Martin, Marcus Gary; Cygan, Randall Timothy

2007-03-01T23:59:59.000Z

488

Conventional power sources for colliders  

SciTech Connect (OSTI)

At SLAC we are developing high peak-power klystrons to explore the limits of use of conventional power sources in future linear colliders. In an experimental tube we have achieved 150 MW at 1 ..mu..sec pulse width at 2856 MHz. In production tubes for SLAC Linear Collider (SLC) we routinely achieve 67 MW at 3.5 ..mu..sec pulse width and 180 pps. Over 200 of the klystrons are in routine operation in SLC. An experimental klystron at 8.568 GHz is presently under construction with a design objective of 30 MW at 1 ..mu..sec. A program is starting on the relativistic klystron whose performance will be analyzed in the exploration of the limits of klystrons at very short pulse widths.

Allen, M.A.

1987-07-01T23:59:59.000Z

489

Solenoid and monocusp ion source  

DOE Patents [OSTI]

An ion source which generates hydrogen ions having high atomic purity incorporates a solenoidal permanent magnets to increase the electron path length. In a sealed envelope, electrons emitted from a cathode traverse the magnetic field lines of a solenoid and a monocusp magnet between the cathode and a reflector at the monocusp. As electrons collide with gas, the molecular gas forms a plasma. An anode grazes the outer boundary of the plasma. Molecular ions and high energy electrons remain substantially on the cathode side of the cusp, but as the ions and electrons are scattered to the aperture side of the cusp, additional collisions create atomic ions. The increased electron path length allows for smaller diameters and lower operating pressures. 6 figs.

Brainard, J.P.; Burns, E.J.T.; Draper, C.H.

1997-10-07T23:59:59.000Z

490

Roll stabilization for fast monohulls by using passive and active lifting appendages  

E-Print Network [OSTI]

Roll stabilization for monohulls is an important issue in naval architecture. Several methods including roll stabilization tanks, active control fins, rudder roll stabilization systems, and bilge keels are commonly used ...

Ulusoy, Talha

2004-01-01T23:59:59.000Z

491

Short note on the stability of a dilatonic wall  

E-Print Network [OSTI]

A nontopological soliton solution of dilaton-Maxwell theory describes a domain wall-like solution which confines magnetic flux in its core [G.W. Gibbons and C.G. Wells, Class. Quant. Grav. 11, 2499 (1994)]. Since the solution is not stabilized by a nontrivial topology of the vacuum manifold, it is interesting to see if the static solution is stable against small fluctuations. We consider the stability of the solution in response to small fluctuations in the scalar and magnetic fields. It is determined that the ansatz solution does indeed exhibit stability.

J. R. Morris

2014-09-29T23:59:59.000Z

492

Plutonium stabilization and handling quality assurance program plan  

SciTech Connect (OSTI)

This Quality Assurance Program Plan (QAPP) identifies project quality assurance requirements for all contractors involved in the planning and execution of Hanford Site activities for design, procurement, construction, testing and inspection for Project W-460, Plutonium Stabilization and Handling. The project encompasses procurement and installation of a Stabilization and Packaging System (SPS) to oxidize and package for long term storage remaining plutonium-bearing special nuclear materials currently in inventory at the Plutonium Finishing Plant (PFP), and modification of vault equipment to allow storage of resulting packages of stabilized SNM.

Weiss, E.V.

1998-04-22T23:59:59.000Z

493

Containment and stabilization technologies for mixed hazardous and radioactive wastes  

SciTech Connect (OSTI)

A prevalent approach to the cleanup of waste sites contaminated with hazardous chemicals and radionuclides is to contain and/or stabilize wastes within the site. Stabilization involves treating the wastes in some fashion, either in situ or above ground after retrieval, to reduce the leachability and release rate of waste constituents to the environment. This approach is generally reserved for radionuclide contaminants, inorganic hazardous contaminants such as heavy metals, and nonvolatile organic contaminants. This paper describes the recent developments in the technical options available for containing and stabilizing wastes. A brief description of each technology is given along with a discussion of the most recent developments and examples of useful applications.

Buelt, J.L.

1993-05-01T23:59:59.000Z

494

Non-binary Entanglement-assisted Stabilizer Quantum Codes  

E-Print Network [OSTI]

In this paper, we show how to construct non-binary entanglement-assisted stabilizer quantum codes by using pre-shared entanglement between the sender and receiver. We also give an algorithm to determine the circuit for non-binary entanglement-assisted stabilizer quantum codes and some illustrated examples. The codes we constructed do not require the dual-containing constraint, and many non-binary classical codes, like non-binary LDPC codes, which do not satisfy the condition, can be used to construct non-binary entanglement-assisted stabilizer quantum codes.

Leng Riguang; Ma Zhi

2011-05-30T23:59:59.000Z

495

Hanford Tank Waste - Near Source Treatment of Low Activity Waste  

SciTech Connect (OSTI)

Abstract only. Treatment and disposition of Hanford Site waste as currently planned consists of 100+ waste retrievals, waste delivery through up to 8+ miles of dedicated, in-ground piping, centralized mixing and blending operations- all leading to pre-treatment combination and separation processes followed by vitrification at the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The sequential nature of Tank Farm and WTP operations requires nominally 15-20 years of continuous operations before all waste can be retrieved from many Single Shell Tanks (SSTs). Also, the infrastructure necessary to mobilize and deliver the waste requires significant investment beyond that required for the WTP. Treating waste as closely as possible to individual tanks or groups- as allowed by the waste characteristics- is being investigated to determine the potential to 1) defer, reduce, and/or eliminate infrastructure requirements, and 2) significantly mitigate project risk by reducing the potential and impact of single point failures. The inventory of Hanford waste slated for processing and disposition as LAW is currently managed as high-level waste (HLW), i.e., the separation of fission products and other radionuclides has not commenced. A significant inventory of this waste (over 20M gallons) is in the form of precipitated saltcake maintained in single shell tanks, many of which are identified as potential leaking tanks. Retrieval and transport (as a liquid) must be staged within the waste feed delivery capability established by site infrastructure and WTP. Near Source treatment, if employed, would provide for the separation and stabilization processing necessary for waste located in remote farms (wherein most of the leaking tanks reside) significantly earlier than currently projected. Near Source treatment is intended to address the currently accepted site risk and also provides means to mitigate future issues likely to be faced over the coming decades. This paper describes the potential near source treatment and waste disposition options as well as the impact these options could have on reducing infrastructure requirements, project cost and mission schedule.

Ramsey, William Gene

2013-08-15T23:59:59.000Z

496

Ion source based on the cathodic arc  

DOE Patents [OSTI]

A cylindrically symmetric arc source to produce a ring of ions which leave the surface of the arc target radially and are reflected by electrostatic fields present in the source to a point of use, such as a part to be coated, is described. An array of electrically isolated rings positioned in the source serves the dual purpose of minimizing bouncing of macroparticles and providing electrical insulation to maximize the electric field gradients within the source. The source also includes a series of baffles which function as a filtering or trapping mechanism for any macroparticles. 3 figures.

Sanders, D.M.; Falabella, S.

1994-02-01T23:59:59.000Z

497

Source depth for solar p-modes  

E-Print Network [OSTI]

Theoretically calculated power spectra are compares with observed solar p-mode velocity power spectra over a range of mode degree and frequency. The depth for the sources responsible for exciting p-modes of frequency 2.0 mHz is determined from the asymmetry of their power spectra and found to be about 800 km below the photosphere for quadrupole sources and 150 km if sources are dipole. The source depth for high frequency oscillations of frequency greater than about 6 mHz is 180 (50) km for quadrupole (dipole) sources.

Pawan Kumar; Sarbani Basu

2000-06-15T23:59:59.000Z

498

The Status of Research Regarding Magnetic Mirrors as a Fusion Neutron Source or Power Plant  

SciTech Connect (OSTI)

Experimental results, theory and innovative ideas now point with increased confidence to the possibility of a Gas Dynamic Trap (GDT) neutron source which would be on the path to an attractively simple Axisymmetric Tandem Mirror (ATM) power plant. Although magnetic mirror research was terminated in the US 20 years ago, experiments continued in Japan (Gamma 10) and Russia (GDT), with a very small US effort. This research has now yielded data, increased understanding, and generated ideas resulting in the new concepts described here. Early mirror research was carried out with circular axisymmetric magnets. These plasmas were MHD unstable due to the unfavorable magnetic curvature near the mid-plane. Then the minimum-B concept emerged in which the field line curvature was everywhere favorable and the plasma was situated in a MHD stable magnetic well (70% average beta in 2XII-B). The Ioffe-bar or baseball-coil became the standard for over 40 years. In the 1980's, driven by success with minimum-B stabilization and the control of ion cyclotron instabilities in PR6 and 2XII-B, mirrors were viewed as a potentially attractive concept with near-term advantages as a lower Q neutron source for applications such as a hybrid fission fuel factory or toxic waste burner. However there are down sides to the minimum-B geometry: coil construction is complex; restraining magnetic forces limit field strength and mirror ratios. Furthermore, the magnetic field lines have geodesic curvature which introduces resonant and neoclassical radial transport as observed in early tandem mirror experiments. So what now leads us to think that simple axisymmetric mirror plasmas can be stable? The Russian GDT experiment achieves on-axis 60% beta by peaking of the kinetic plasma pressure near the mirror throat (where the curvature is favorable) to counter-balance the average unfavorable mid-plane curvature. Then a modest augmentation of plasma pressure in the expander results in stability. The GDT experiments have confirmed the physics of effluent plasma stabilization predicted by theory. The plasma had a mean ion energy of 10 keV and a density of 5e19m-3. If successful, the axisymmetric tandem mirror extension of the GDT idea could lead to a Q {approx} 10 power plant of modest size and would yield important applications at lower Q. In addition to the GDT method, there are four other ways to augment stability that have been demonstrated; including: plasma rotation (MCX), diverter coils (Tara), pondermotive (Phaedrus & Tara), and end wall funnel shape (Nizhni Novgorod). There are also 5 stabilization techniques predicted, but not yet demonstrated: expander kinetic pressure (KSTM-Post), Pulsed ECH Dynamic Stabilization (Post), wall stabilization (Berk), non-paraxial end mirrors (Ryutov), and cusp ends (Kesner). While these options should be examined further together with conceptual engineering designs. Physics issues that need further analysis include: electron confinement, MHD and trapped particle modes, analysis of micro stability, radial transport, evaluation and optimization of Q, and the plasma density needed to bridge to the expansion-region. While promising all should be examined through increased theory effort, university-scale experiments, and through increased international collaboration with the substantial facilities in Russia and Japan The conventional wisdom of magnetic mirrors was that they would never work as a fusion concept for a number of reasons. This conventional wisdom is most probably all wrong or not applicable, especially for applications such as low Q (DT Neutron Source) aimed at materials testing or for a Q {approx} 3-5 fusion neutron source applied to destroying actinides in fission waste and breeding of fissile fuel.

Simonen, T

2008-12-23T23:59:59.000Z

499

E-Print Network 3.0 - affect stability binding Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

stability binding Search Powered by Explorit Topic List Advanced Search Sample search results for: affect stability binding Page: << < 1 2 3 4 5 > >> 1 Chemistry Department 2011...

500

E-Print Network 3.0 - amine light stabilizers Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

must be disproportionately stabilized by the amines. Similar azaphilicity of the monomer emerged... and 9) once again revealed the relative stabilization of amine-solvated...