National Library of Energy BETA

Sample records for brochures additional information

  1. Brochures, Logos, & Information Resources | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brochures, Logos, & Information Resources About About Home Organization Budget Field Offices Federal Advisory Committees History Scientific and Technical Information Honors & Awards Jobs Brochures, Logos, & Information Resources Brochures Fact Sheets SC Logos Newsletters Connect with SC Contact Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 Brochures, Logos, & Information Resources Print Text Size:

  2. ARM - Brochures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MaterialsBrochures Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos...

  3. Solar Decathlon 2009 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    This brochure provides key information about Solar Decathlon 2009--the dates, the background of the competition and event, and where to go for more information.

  4. Former Worker Program Brochure

    Broader source: Energy.gov [DOE]

    The FWP brochure provides important information to inform former and current DOE Federal, contractor, and subcontractor employees about the benefits and services offered under the DOE Former Worker...

  5. Brochure, Classification Bulletin GEN-16- February 2012

    Broader source: Energy.gov [DOE]

    Brochure on Classification Bulletin GEN-16, No Comment Policy on Classified Information in the open literature

  6. AIRMaster+ Software Tool Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Software Tool Brochure AIRMaster+ Software Tool Brochure Brochure that provides information on AMO's AIRMaster+ software tool, including how it works, next steps, and how to access the tool. PDF icon AIRMaster+ Brochure More Documents & Publications AIRMaster+ Tool Introduction AIRMaster+ Fact Sheet Pre-In-Plant Training Webinar (Compressed Air): Presentation Slides

  7. Brochures | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Divisions & Departments BROCHURES JLab General Brochure JLab Brochure 12GeV Upgrade Brochure 12GeV Upgrade Brochure Free-Electron Laser Brochure Free-Electron Laser Brochure Nuclear Imaging Brochure Nuclear Imaging Brochure Science Education Brochure Science Education Brochure Superconducting Radiofrequency Superconducting Radio Frequency Technology Brochure JLab Viewbook JLaB View Book Accelerating Innovation JLaB View Book Experimental Hall A Poster Science Highlights from the First 15

  8. Overview Brochures

    Office of Science (SC) Website

    Brochures Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory Committee (BESAC) ...

  9. Brochures | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Brochures About About Home Organization Budget Field Offices Federal Advisory Committees History Scientific and Technical Information Honors & Awards Jobs Brochures, Logos, & Information Resources Brochures Fact Sheets SC Logos Newsletters Connect with SC Contact Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 Brochures, Logos, & Information Resources Brochures Print Text Size: A A A FeedbackShare Page

  10. MotorMaster+ Software Tool Brochure

    Broader source: Energy.gov [DOE]

    This brochure provides information on AMO's MotorMaster+ software tool, including how it works, next steps, and how to access it.

  11. Brochure, Classification Overview of RD and FRD - September 2010 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Overview of RD and FRD - September 2010 Brochure, Classification Overview of RD and FRD - September 2010 September 2010 A Classification Overview of Restricted Data and Formerly Restricted Data - Brochure. PDF icon Brochure, Classification Overview of RD and FRD - September 2010 More Documents & Publications Briefing, Classification of Nuclear Weapons-Related Information Briefing, Transclassified Foreign Nuclear Information - June 2014 Brochure, Training and Outreach

  12. Brochure, Understanding UCNI - July 2010 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UCNI - July 2010 Brochure, Understanding UCNI - July 2010 July 2010 Tri-fold brochure outlining what UCNI is and the guidelines on identifying, marking and protecting UCNI. PDF icon Brochure, Understanding UCNI - July 2010 More Documents & Publications Briefing, For Persons With Access to UCNI - June 2014 Summary, UCNI Document Markings - November 2011 Unclassified Controlled Nuclear Information General Guideline

  13. Air Conditioner Regional Standards Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Air Conditioner Regional Standards Brochure Air Conditioner Regional Standards Brochure November 9, 2015 DOE has adopted energy conservation standards for split-system air conditioners that vary depending on when and where a unit is installed. This brochure provides information about the new standards to distributors, contractors (installers), and consumers. PDF icon Central Air Conditioner Standards Brochure More Documents & Publications 2015-11-12 Proposed Rulemaking Regarding Enforcement

  14. DOE Office of Indian Energy Overview Brochure | Department of Energy

    Energy Savers [EERE]

    DOE Office of Indian Energy Overview Brochure DOE Office of Indian Energy Overview Brochure The U.S. Department of Energy (DOE) Office of Indian Energy Stengthening Tribal Communities, Sustaining Future Generations is an overview brochure with information on the Office of Indian Energy's education and capacity building, technical assistance, and resources for tribes. PDF icon Office of Indian Energy Overview Brochure More Documents & Publications Alaska Energy Pioneer Summer 2015 Newsletter

  15. DOE Office of Indian Energy Overview Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Office of Indian Energy Overview Brochure DOE Office of Indian Energy Overview Brochure The U.S. Department of Energy (DOE) Office of Indian Energy Stengthening Tribal Communities, Sustaining Future Generations is an overview brochure with information on the Office of Indian Energy's education and capacity building, technical assistance, and resources for tribes. PDF icon DOE Office of Indian Energy Overview Brochure More Documents & Publications Office of Indian Energy Alaska Energy

  16. Composite Adversary Team Brochure - April 9, 2008 | Department of Energy

    Office of Environmental Management (EM)

    Composite Adversary Team Brochure - April 9, 2008 Composite Adversary Team Brochure - April 9, 2008 April 9, 2008 This brochure provides basic information about the CAT Program and its role in the Independent Oversight process. This brochure describes the role of the Department of Energy's Composite Adversary Team that is managed by the Office of Health, Safety and Security's Office of Security and Cyber Evaluations. The Composite Adversary Team is an elite group of specially-trained Security

  17. Former Worker Medical Screening Program Brochure

    Broader source: Energy.gov [DOE]

    The FWP brochure provides important information to inform former and current DOE Federal, contractor, and subcontractor employees about the benefits and services offered under the DOE Former Worker Medical Screening Program.

  18. Brochure, Understanding Classification - June 2012 | Department of Energy

    Energy Savers [EERE]

    Brochure, Understanding Classification - June 2012 Brochure, Understanding Classification - June 2012 June 2012 This booklet highlights your responsibilities identified in DOE Order 475.2A, Identifying Classified Information. Classification is how certain information is identified that needs to be protected in the interest of national security. DOE has a formal process for classifying and declassifying information, documents, and materials. PDF icon Brochure, Understanding Classification - June

  19. Active Sites Additional Information | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Active Sites Additional Information Active Sites Additional Information Active Sites Additional Information The Office of Environmental Management (EM) supports the Department's Strategic Plan to complete the environmental remediation of legacy and active sites, while protecting human health and the environment by completing environmental remediation of legacy and active Cold War sites. The EM program was established in 1989 and is responsible for the cleanup of millions of gallons of liquid

  20. The EM Story Brochure

    Broader source: Energy.gov [DOE]

    In 2012, the EM story brochure was released to the public that provided a high-level summary and communicated EM's history, cleanup, and challenges.

  1. Brochure, Understanding Official Use Only - June 2011 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Official Use Only - June 2011 Brochure, Understanding Official Use Only - June 2011 June 2011 Tri-fold brochure outlining what Official Use Only is and guidelines on determining if the document contains OUO, how the document must be marked and list of exemptions related to Freedom of Information Act. PDF icon Brochure, Understanding Official Use Only - June 2011 More Documents & Publications Briefing, DOE's Official Use Only Program - June 2014 Pamphlet, Understanding Official Use

  2. Archived Brochures | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARCHIVED BROCHURES & FACT SHEETS FEL FEL 11x17 CEBAF CEBAF 11x17 ARRA Infrastructure ARRA Infrastructure ARRA at JLab ARRA at JLab JLab at a Glance JLab at a Glance FEL Panel FEL Panel TEDF TEDF 12Gev Slick 12Gev Slick JLab Factsheet Slick JLab Factsheet Slick Terahertz Slick Terahertz Slick Current Brochures

  3. Brochures | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brochures Advanced Materials Engineering the Future of Energy Engineering the Future of Energy Wellbore Integrity Assurance

  4. Brochure, Understanding Classification - June 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Brochure, Understanding Classification - June 2012 Brochure, Understanding Classification - June 2012 June 2012 This booklet highlights your responsibilities identified in DOE...

  5. Brochure, Understanding UCNI- August 2014

    Broader source: Energy.gov [DOE]

    Tri-fold brochure outlining what UCNI is and the guidelines on identifying, marking and protecting UCNI.

  6. Mediation Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Brochure Mediation Brochure This brochure covers the following Mediation topics: Conflict in the workplace What is mediation? What types of conflicts can be mediated? Who can request mediation? How to get started What to expect at mediation Benefits of mediation PDF icon 2mediation_brochure.pdf More Documents & Publications Microsoft Word - GC Mediation Evaluation _2-06-09_.doc Mediation Survey Form Alternative Dispute Resolution (ADR) Secretarial Statement

  7. FEOSH Brochure | Department of Energy

    Office of Environmental Management (EM)

    FEOSH Brochure FEOSH Brochure Approximately 16,000 Department of Energy (DOE) Federal employees are dispersed throughout DOE; the power marketing administrations, the energy technology centers, Headquarters, operation and field offices. PDF icon FEOSH Brochure More Documents & Publications CAIRS Registration Form FEOSH Safety Plan 2007 Federal Employee Occupational Safety And Health (FEOSH) Program Overview Contact Carlos Coffman

  8. Ann Arbor, Michigan: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Ann Arbor, Michigan, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  9. Pittsburgh, Pennsylvania: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Pittsburgh, PA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  10. Seattle, Washington: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Seattle, WA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  11. Houston, Texas: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Houston, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  12. New Orleans, Louisiana: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of New Orleans, LA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  13. Tucson, Arizona: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Tucson, AZ, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  14. Milwaukee, Wisconsin: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Milwaukee, WI, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  15. Denver, Colorado: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Denver, Colorado, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  16. San Jose, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of San Jose, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  17. Philadelphia, Pennsylvania: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Philadelphia, PA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  18. Portland, Oregon: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Portland, OR, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  19. Santa Rosa, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Santa Rosa, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  20. Madison, Wisconsin: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Madison, WI, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  1. San Francisco, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of San Francisco, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  2. Orlando, Florida: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Orlando, FL, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  3. San Diego, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of San Diego, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  4. Knoxville, Tennessee: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Knoxville, TN, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  5. Sacramento, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Sacramento, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  6. San Antonio, Texas: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of San Antonio, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  7. Austin, Texas: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Austin, Texas, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  8. Berkeley, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Berkeley, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  9. Leading the Way to Energy Systems Research (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-05-01

    This brochure about NREL is a national version that can be distributed to visitors and any other interested parties. It provides general information about laboratory, its mission, and operations.

  10. National Renewable Energy Laboratory: 35 Years of Innovation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-11-01

    This brochure about NREL is a national version that can be distributed to visitors and any other interested parties. It provides general information about laboratory, its mission, and operations.

  11. STEP Brochure (Spanish) | Department of Energy

    Energy Savers [EERE]

    STEP Brochure (Spanish) STEP Brochure (Spanish) STEP Brochure (Spanish), from the Tool Kit Framework: Small Town University Energy Program (STEP). PDF icon F1b STEP Brochure (Spanish).pdf More Documents & Publications Ahorre Energía STEP Brochure (Spanish) Conocimiento de Energia Get Current: Switch on Clean Energy Activity Book

  12. Quality of Work Life brochure | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Quality of Work Life brochure PDF icon 2013_08_29 hr_worklifepolicies brochure

  13. Center for Nanoscale Materials Brochure | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brochure Changing the World with Nanoscience PDF icon CNM Brochure 2014

  14. Brochures | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brochures Subscribe to RSS - Brochures The United States Department of Energy's Princeton Plasma Physics Laboratory works with collaborators across the globe to develop fusion as an energy source for the world, and conducts research along the broad frontier of plasma science and technology. Printed materials are free, accessible, and downloadable from this website. Image: Brochures PPPL Experts Fusion. Energy. Plasma. Physics. Tokamaks. Stellarators. Radioactivity. Nanotechnology. Astrophysics.

  15. Utility Partnerships Program Overview (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01

    Program overview brochure for the Utility Partnerships Program within the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP).

  16. New American Home 2009 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01

    This brochure details the New American Home 2009, which demonstrates the use of innovative building materials, cutting-edge design, and the latest construction techniques.

  17. Brochure, Training and Outreach Materials for RD and FRD - October 2007 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Training and Outreach Materials for RD and FRD - October 2007 Brochure, Training and Outreach Materials for RD and FRD - October 2007 October 2007 Brochure outlining Training and Outreach Materials for Restricted Data and Formerly Restricted Data. PDF icon Brochure, Training and Outreach Materials for RD and FRD - October 2007 More Documents & Publications Briefing, Classification of Nuclear Weapons-Related Information Catalog, Classification Training Institute

  18. PPPL Overview brochure | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL Overview brochure The Princeton Plasma Physics Laboratory is a world-class fusion energy research laboratory dedicated to developing the scientific and technological knowledge base for fusion energy as a safe, economical and environmentally attractive energy source for the world's long-term energy requirements. Image: PPPL Brochure Publication File: PDF icon PPPL Overview brochure Publication Type: Brochures

  19. HQ Mediation Program Brochure | Department of Energy

    Energy Savers [EERE]

    HQ Mediation Program Brochure HQ Mediation Program Brochure This document is the HQ Mediation Program's brochure. It generally discusses the services the program offers. PDF icon Brochure.pdf More Documents & Publications Mediation Process Microsoft Word - GC Mediation Evaluation _2-06-09_.doc Mediation Survey Form

  20. 2015 Student Employment Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Student Employment Brochure 2015 Student Employment Brochure This year's brochure listing the veriest programs with in the Department of Energy for students and recent graduates. PDF icon Student Employment Brochure_2015.pdf More Documents & Publications MICKEY LELAND ENERGY FELLOWSHIP 2016 FLYLER Powerpoint on STEM Programs 2016 MEISPP Flyer

  1. Environmental Justice Brochure | Department of Energy

    Office of Environmental Management (EM)

    Brochure Environmental Justice Brochure Environmental Justice Brochure PDF icon Environmental Justice Brochure More Documents & Publications Environmental Justice at the U.S. Department of Energy - A Decade of Progress Environmental Justice and Public Participation Through Technology- Building Community Capacity National Conference of Black Mayors, Inc.

  2. 2012 SEPA Customer Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2012 SEPA Customer Brochure 2012 SEPA Customer Brochure Southeastern Power Administration 2012 Customer Brochure PDF icon 2012 SEPA Customer Brochure More Documents & Publications Before the Subcommittee on Water and Power - Committee on Natural Resources Southeastern Power Administration 2008 Annual Report Before the Subcommittee on Water and Power - House Natural Resources Committee

  3. Magellan additional information | U.S. DOE Office of Science...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magellan additional information Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities Science Highlights Benefits of ASCR Funding Opportunities...

  4. Greensburg, Kansas: Building a Model Green Community, How Would You Rebuild a Town- Green? April 2009 (Brochure)

    Broader source: Energy.gov [DOE]

    This brochure describes the rebuilding of Greensburg, Kansas, highlighting the Greensburg High Performance Buildings Database as a source of information for energy-efficient building techniques.

  5. NNMCAB Brochure | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    A Guide to what the NNMCAB is, and the activities it works on. PDF icon NNMCAB Brochure 2014 More Documents & Publications NNMCAB Newsletter: Winter 2015 NNMCAB Newsletter: Summer 2014 NNMCAB Newsletter: Fall 2014

  6. Princeton Plasma Physics Lab - Brochures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    en PPPL Overview brochure http:www.pppl.govnode3229

  7. VERIFI Brochure | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    VERIFI Brochure The Virtual Engine Research Institute and Fuels Initiative (VERIFI) is the first and only source in the world for high-fidelity, end-to-end, combustion engine...

  8. WIST Brochure | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WIST Brochure Argonne's Women in Science and Technology (WIST) program was created in 1990 to recruit, retain, and promote women in an effort to diversify and strengthen the Laboratory's scientific workforce. The program aims to promote the success of women in scientific and technical positions at Argonne, and outside as well. Through WIST, the Laboratory strives to encourage and develop the full potential of women in science and technology. PDF icon WIST_Brochure

  9. ARI Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ARI Brochure ARI Brochure ARI is a DOE-wide effort to advance the beneficial reuse of the agency's unique and diverse mix of assets, including land, facilities, infrastructure, equipment, technologies, natural resources, and a highly skilled workforce. ARI promotes an efficient business environment to encourage collaboration between public and private resources. ARI will strive to achieve DOE energy and environmental goals as well as to stimulate and diversify regional economies. PDF icon ARI

  10. DOE Privacy Program Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Privacy Program Brochure DOE Privacy Program Brochure PDF icon Employee Guide to Privacy More Documents & Publications DEPARTMENT OF ENERGY Privacy Awareness Training Audit Report: IG-0771 Elements of a Federal Privacy Program

  11. LPO_BROCHURE_CSP | Department of Energy

    Office of Environmental Management (EM)

    LPO_BROCHURE_CSP LPO_BROCHURE_CSP PDF icon DOE-LPO_Brochure_CSP-2015.pdf More Documents & Publications DOE-LPO_Email-Update_001_Through_11 DOE-LPO_Email-Update_013_Final_2-Feb-2016 DOE-LPO_Email-Update_012_Final_17-Dec-2015

  12. Energy Industry Days Additional Information | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Industry Days Additional Information Energy Industry Days Additional Information The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy is hosting several Energy Industry Day events to promote and publicize opportunities for small businesses seeking to meet DOE support requirements. Opportunities will be available for attendees to learn of potential partnerships with prime and subcontracting companies. These Energy Industry Day events would both support the

  13. Salt Lake City, Utah: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Salt Lake City, UT, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  14. New York City, New York: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of New York City, NY, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  15. Minneapolis and Saint Paul, Minnesota: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Minneapolis, MN, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  16. Making Cents Out of Solar: Put More Power Into Your Building Plans (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-01-01

    This is a brochure developed specifically for residential home builders. It provides information on basic solar facts, selling tips, and important resources when incorporating solar technologies into building plans.

  17. Energy-Saving Opportunities for Manufacturing Companies (English/Portuguese Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01

    This English/Portuguese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  18. Energy-Saving Opportunities for Manufacturing Enterprises in China (International Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-10-01

    This English/Chinese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help Chinese manufacturing facilities reduce industrial energy intensity.

  19. Partnering with the NCPV (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01

    Brochure that explains the basic partnering opportunities that exist within the National Center for Photovoltaics for industry and university groups: non-proprietary partnering opportunities, competitive solicitations, Technology Partnership Agreements, seed fund to develop Technology Partnership Agreements, Hands-On PV Experience Workshop, and NCPV Fellowship Program.

  20. Personal Property Management Program Brochure | Department of Energy

    Energy Savers [EERE]

    Management Program Brochure Personal Property Management Program Brochure PDF icon Personal Property Management Program Brochure More Documents & Publications Personal Property Briefings COMMENTS� Executive Order 13514: Comprehensive Federal Fleet Management Handbook

  1. Personal Property Management Certification Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management Certification Brochure Personal Property Management Certification Brochure PDF icon Personal Property Management Certification Brochure More Documents & Publications Personal Property Briefings Initial Application for FAC-C, Purchasing, Financial Assistance and Property Management Certification OPAM Policy Acquisition Guides

  2. 2011-2020 Strategic Plan Highlights Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plan Highlights Brochure 2011-2020 Strategic Plan Highlights Brochure Strategic Plan Highlights 2011-2020 PDF icon LM Brochure More Documents & Publications 2011-2020 Strategic Plan Legacy Management 2011-2020 Strategic Plan Program Update: 4th

  3. San Antonio, Texas: Solar in Action (Brochure), Solar America...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Antonio, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) San Antonio, Texas: Solar in Action (Brochure), Solar America Cities, ...

  4. Seattle, Washington: Solar in Action (Brochure), Solar America...

    Office of Environmental Management (EM)

    Seattle, Washington: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Seattle, Washington: Solar in Action (Brochure), Solar America ...

  5. San Francisco, California: Solar in Action (Brochure), Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Francisco, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) San Francisco, California: Solar in Action (Brochure), Solar...

  6. Portland, Oregon: Solar in Action (Brochure), Solar America Cities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Portland, Oregon: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Portland, Oregon: Solar in Action (Brochure), Solar America Cities,...

  7. Orlando, Florida: Solar in Action (Brochure), Solar America Cities...

    Office of Environmental Management (EM)

    Orlando, Florida: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Orlando, Florida: Solar in Action (Brochure), Solar America Cities,...

  8. Denver, Colorado: Solar in Action (Brochure), Solar America Cities...

    Office of Environmental Management (EM)

    Denver, Colorado: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Denver, Colorado: Solar in Action (Brochure), Solar America Cities,...

  9. Nuclear Physics Related Brochures | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Nuclear Physics Related Brochures and Videos Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources NP Workforce Survey Results .pdf file (182KB) Links News Archives Databases Reports Workshops Nuclear Physics Related Brochures and Videos Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P:

  10. Securing America's Clean Energy Future (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-08-01

    This letter-fold brochure provides an overview of the activities and programs in DOE's Office of Energy Efficiency and Renewable Energy.

  11. Innovation Impact: Breakthrough Research Results (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-07-01

    The Innovation Impact brochure captures key breakthrough results across NREL's primary areas of renewable energy and energy efficiency research: solar, wind, bioenergy, transportation, buildings, analysis, and manufacturing technologies.

  12. Renewable Energy Development on Tribal Lands (Brochure)

    SciTech Connect (OSTI)

    2009-01-18

    Brochure describes the Tribal Energy Program, which provides American Indian tribes with financial and technical assistance for developing renewable energy projects on tribal land.

  13. New American Home 2011, Orlando, Florida (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-12-01

    This brochure details the New American Home 2011, which demonstrates the use of innovative building materials, cutting-edge design, and the latest construction techniques.

  14. Healthcare Energy Metering Guidance (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01

    This brochure is intended to help facility and energy managers plan and prioritize investments in energy metering. It offers healthcare-specific examples of metering applications, benefits, and steps that other health systems can reproduce. It reflects collaborative input from the U.S. Department of Energy national laboratories and the health system members of the DOE Hospital Energy Alliance's Benchmarking and Measurement Project Team.

  15. Assistance Focus: Africa (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-12-01

    The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to African governments, including the benefits of that assistance.

  16. Pittsburgh, Pennsylvania: Solar in Action (Brochure), Solar America Cities,

    Broader source: Energy.gov (indexed) [DOE]

    Energy Efficiency & Renewable Energy (EERE) | Department of Energy Pittsburgh, PA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given. PDF icon 50199_pittsburgh.pdf More Documents & Publications San Francisco, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Ann Arbor, Michigan: Solar in Action

  17. Training for Records and Information Management

    Broader source: Energy.gov [DOE]

    Records Management Training:† NARA Records Management Training†† NARA Targeted Assistance NARA Brochures Training Presentation:† Information Collection Requests/PRA (pdf) †

  18. Advancing Efforts to Energize Native Alaska (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01

    This brochure describes key programs and initiatives of the DOE Office of Indian Energy Policy and Programs to advance energy efficiency, renewable energy, and energy infrastructure projects in Alaska Native villages.

  19. Homebuilder's Guide to Going Solar (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01

    This 8-page brochure describes the steps a builder would take to install solar electricity (photovoltaics or PV), solar water heating, or how to build a home solar ready.

  20. ISO 50001 Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    50001 Brochure ISO 50001 Brochure Overview of International Organization for Standardization (ISO) 50001, a voluntary International Standard that gives organizations the requirements for energy management systems (EnMS). PDF icon Win the energy challenge with ISO 50001 (2011) More Documents & Publications ISO launches a project committee to develop an International Standard for energy management Becoming a Certified Practitioner or a Certified Energy Engineer ISO 50001 Conformant Energy

  1. What is Clean Cities? October 2011 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    Brochure describes the Clean Cities program and includes the contact information for its 85 coalitions. Sponsored by the U.S. Department of Energy's (DOE) Vehicle Technologies Program (VTP), Clean Cities is a government-industry partnership that reduces petroleum consumption in the transportation sector. Clean Cities contributes to the energy, environmental, and economic security of the United States by supporting local decisions to reduce our dependence on imported petroleum. Established in 1993 in response to the Energy Policy Act (EPAct) of 1992, the partnership provides tools and resources for voluntary, community-centered programs to reduce consumption of petroleum-based fuels. In nearly 100 coalitions, government agencies and private companies voluntarily come together under the umbrella of Clean Cities. The partnership helps all parties identify mutual interests and meet the objectives of reducing the use of petroleum, developing regional economic opportunities, and improving air quality. Clean Cities deploys technologies and practices developed by VTP. These include idle-reduction equipment, electric-drive vehicles, fuel economy measures, and renewable and alternative fuels, such as natural gas, liquefied petroleum gas (propane), electricity, hydrogen, biofuels, and biogas. Idle-reduction equipment is targeted primarily to buses and heavy-duty trucks, which use more than 2 billion gallons of fuel every year in the United States while idling. Clean Cities fuel economy measures include public education on vehicle choice and fuel-efficient driving practices.

  2. Research Advances Cellulosic Ethanol, NREL Leads the Way (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2007-03-01

    This brochure highlights NREL's recent advances in cellulosic ethanol production. Research at NREL addresses both biochemical and thermochemical processes.

  3. Solid-State Lighting Program Overview Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Overview Brochure Solid-State Lighting Program Overview Brochure PDF icon Solid-State Lighting Program Overview Brochure.pdf More Documents & Publications Solid-State Lighting Emerging Lighting Technology Solid-State Lighting R&D Plan

  4. Hydrogen-Powered Buses Brochure - 2010 | Department of Energy

    Energy Savers [EERE]

    Hydrogen-Powered Buses Brochure - 2010 Hydrogen-Powered Buses Brochure - 2010 This brochure outlines how the latest advances in hydrogen vehicles are expressed in these hydrogen-powered buses. PDF icon Hydrogen-Powered Buses More Documents & Publications Hydrogen and Fuel Cell Technologies Program: Fuel Cells Fact Sheet Fuel Cells Fact Sheet FutureGen -- A Sequestration and Hydrogen Research Initiative

  5. Personal Property Management Program Brochure | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Personal Property Management Program Brochure Personal Property Management Program Brochure PDF icon Personal Property Management Program Brochure More Documents & Publications Personal Property Briefings Policy Flash 2013-23 Department of Energy Acquisition Regulation (DEAR) Final Rule for changes to Parts 908, 945, 952, and 970 regarding Government Property COMMENTS�

  6. EERE Program Management Initiative (PMI) Brochure | Department of Energy

    Office of Environmental Management (EM)

    Initiative (PMI) Brochure EERE Program Management Initiative (PMI) Brochure The EERE Program Management Initiative document outlines a coordinated set of actions to improve its program management capabilities. PDF icon pmi_brochure.pdf More Documents & Publications EERE Program Management Guide - About the Program Management Guide EERE Program Management Guide - Appendix I

  7. Ann Arbor, Michigan: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Ann Arbor, Michigan, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  8. Orlando, Florida: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Orlando, FL, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  9. Knoxville, Tennessee: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Knoxville, TN, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  10. Austin, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This brochure provides an overview of the challenges and successes of Austin, Texas, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  11. Salt Lake City, Utah: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Salt Lake City, UT, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  12. Philadelphia, Pennsylvania: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Philadelphia, PA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  13. San Diego, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of San Diego, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  14. Berkeley, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Berkeley, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  15. Santa Rosa, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Santa Rosa, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  16. Sacramento, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Sacramento, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  17. Milwaukee, Wisconsin: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Milwaukee, WI, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  18. Tucson, Arizona: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Tucson, AZ, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  19. Houston, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Houston, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  20. Denver, Colorado: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Denver, Colorado, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  1. Boston Massachusetts: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Boston, MA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  2. Madison, Wisconsin: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Madison, WI, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  3. New Orleans, Louisiana: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of New Orleans, LA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  4. Brochures | Center for Gas SeparationsRelevant to Clean Energy Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Blandine Jerome Brochures Previous Next List Download our brochure from Phase 2 (9MB) Phase2.Coverpage Download our brochure from Phase 1 : High resolution (77MB) Low resolution (16MB) Phase1.Coverpage

  5. Portland, Oregon: Solar in Action (Brochure), Solar America Cities, Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency & Renewable Energy (EERE) | Department of Energy Portland, Oregon: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Portland, Oregon: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) This brochure provides an overview of the challenges and successes of Portland, OR, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case

  6. Minneapolis and Saint Paul, Minnesota: Solar in Action (Brochure), Solar

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America Cities, Energy Efficiency & Renewable Energy (EERE) | Department of Energy Minneapolis and Saint Paul, Minnesota: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Minneapolis and Saint Paul, Minnesota: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) This brochure provides an overview of the challenges and successes of Minneapolis, MN, a 2008 Solar America City awardee, on the path

  7. San Francisco, California: Solar in Action (Brochure), Solar America

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cities, Energy Efficiency & Renewable Energy (EERE) | Department of Energy Francisco, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) San Francisco, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) This brochure provides an overview of the challenges and successes of San Francisco, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered

  8. San Antonio, Texas: Solar in Action (Brochure), Solar America Cities,

    Energy Savers [EERE]

    Energy Efficiency & Renewable Energy (EERE) | Department of Energy San Antonio, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) San Antonio, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) This brochure provides an overview of the challenges and successes of San Antonio, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community.

  9. Seattle, Washington: Solar in Action (Brochure), Solar America Cities,

    Energy Savers [EERE]

    Energy Efficiency & Renewable Energy (EERE) | Department of Energy Seattle, Washington: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Seattle, Washington: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) This brochure provides an overview of the challenges and successes of Seattle, WA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community.

  10. Open PV Project: Unlocking PV Installation Data (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01

    This brochure summarizes the Open PV Project, a collaborative effort of government, industry, and the public to compile a comprehensive database of PV installations in the United States. The brochure outlines the purpose and history of the project as well as the main capabilities and benefits of the online Open PV tool. The brochure also introduces how features of the tool are used, and it describes the sources and characteristics of Open PV's data and data collection processes.

  11. Brochure Hydraulic Institute Standards Overview | Department of Energy

    Energy Savers [EERE]

    Hydraulic Institute Standards Overview Brochure Hydraulic Institute Standards Overview If you specify, select, design, test, install or operate pumps or pumping systems, you will find ANSI/HI Pump Standards to be invaluable tools. PDF icon I_Brochure_Hydraulic_Institute_Stds_Overview.pdf More Documents & Publications Brochure HI Standards Subscription Options Summary of 2011 Accomplishments HI & PSM Summary of HI Standards Relating to Energy Efficency

  12. What is Clean Cities? (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-03-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 87 coalitions.

  13. Rebuilding It Better: Greensburg, Kansas, City Hall (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01

    This brochure details the energy efficient and sustainable aspects of the LEED Platinum-designated City Hall building in Greensburg, Kansas.

  14. Minneapolis and Saint Paul, Minnesota: Solar in Action (Brochure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Austin, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy ...

  15. Rebuilding It Better: Greensburg, Kansas. City Hall (Brochure)

    Broader source: Energy.gov [DOE]

    This brochure details the energy efficient and sustainable aspects of the LEED Platinum-designated City Hall building in Greensburg, Kansas.

  16. Rebuilding It Better: City of Greensburg, Kansas, Business Incubator (Brochure)

    Broader source: Energy.gov [DOE]

    This brochure details the energy efficient and sustainable aspects of the LEED Platinum-designed SunChips Business Incubator in Greensburg, Kansas.

  17. Brochure HI Standards Subscription Options | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HI Standards Subscription Options Brochure HI Standards Subscription Options HI's Web-based Standards "packages" will provide you with all of the Standards appropriate for a...

  18. Boston, Massachusetts: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure provides an overview of the challenges and successes of Boston, MA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given. The City of Boston and its Solar America Cities program, Solar Boston, are helping to debunk the myth that solar energy is only feasible in the southern latitudes. Boston has some of the highest energy prices in the country and will likely be one of the first locations where solar power achieves grid parity with conventional energy technologies. Solar Boston is facilitating the rapid development of solar energy projects and infrastructure in the short-term, and is preparing for the rapid market growth that is expected with the imminent arrival of grid parity over the long-term. Solar Boston developed the strategy for achieving Mayor Menino's goal of installing 25 MW of solar energy throughout Boston by 2015. Through Solar Boston, the city has developed a strategy for the installation of solar technology throughout Boston, including mapping feasible locations, preparing a permitting guide, and planning the citywide bulk purchase, financing, and installation of solar technology. The city has also worked with local organizations to maximize Boston's participation in state incentive programs and innovative financing initiatives. The resulting accomplishments include the following: (1) Created an online map of current local renewable energy projects with a tool to allow building owners to calculate their rooftop solar potential. The map is currently live at http://gis.cityofboston.gov/solarboston/. (2) Supported the city's Green Affordable Housing Program (GAHP), in partnership with the Department of Neighborhood Development (DND). Under GAHP, the city is installing more than 150 kW of PV on 200 units of affordable housing. DND requires that all new city-funded affordable housing be LEED silver certified and built solar-ready. (3) Defined solar's role in emergency preparedness with the Boston Mayor's Office of Emergency Preparedness. (4) Worked with local organizations to maximize Boston's participation in state incentive programs and innovative financing mechanisms. Solar Boston partners include DOE, MTC, local utilities and unions, an anonymous foundation, and a broad range of local, regional, and national clean-energy stakeholders. Solar Boston kicked off its partner program on January 10, 2008, sponsoring a workshop on 'Thinking BIG about Boston's Solar Energy Future,' to discuss how state, utility, and municipal programs can work together. Presentations were given by Solar Boston, Keyspan/National Grid, NSTAR, and MTC.

  19. Research Support Facility (RSF): Leadership in Building Performance (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01

    This brochure/poster provides information on the features of the Research Support Facility including a detailed illustration of the facility with call outs of energy efficiency and renewable energy technologies. Imagine an office building so energy efficient that its occupants consume only the amount of energy generated by renewable power on the building site. The building, the Research Support Facility (RSF) occupied by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) employees, uses 50% less energy than if it were built to current commercial code and achieves the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED{reg_sign}) Platinum rating. With 19% of the primary energy in the U.S. consumed by commercial buildings, the RSF is changing the way commercial office buildings are designed and built.

  20. New York City, New York: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of New York City, NY, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  1. Magellan additional information | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Miscellaneous ¬Ľ ASCR Recovery Act Projects ¬Ľ Magellan additional information Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) Community Resources ASCR Discovery Monthly News Roundup News Archives ASCR Program Documents ASCR Workshops and Conferences ASCR Presentations 100Gbps Science Network Related Links Contact Information Advanced Scientific

  2. Better Building Alliance, Plug and Process Loads in Commercial Buildings: Capacity and Power Requirement Analysis (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    This brochure addresses gaps in actionable knowledge that can help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. This brochure should be used to make these decisions so systems can operate more energy efficiently; upfront capital costs will also decrease. This information can also be used to drive changes in negotiations about PPL energy demands. It should enable brokers and tenants to agree about lower PPL capacities. Owner-occupied buildings will also benefit. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems.

  3. Wind for Schools: A Wind Powering America Project (Alaska) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-02-01

    This brochure provides an overview of Wind Powering America's Wind for Schools Project, including a description of the project, the participants, funding sources, the basic configurations, and how interested parties can become involved.

  4. Wind for Schools: A Wind Powering America Project (Brochure)

    SciTech Connect (OSTI)

    Baring-Gould, I.

    2009-08-01

    This brochure provides an overview of Wind Powering America's Wind for Schools Project, including a description of the project, the participants, funding sources, the basic configurations, and how interested parties can become involved.

  5. Lead By Example with Smart Energy Management (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-07-01

    Brochure outlining the mission and activities of the Department of Energy's Federal Energy Management Program, which facilitates the Federal Government's implementation of sound, cost-effective energy management and investment practices to enhance the nation's energy security and environmental stewardship.

  6. Capturing the Sun, Creating a Clean Energy Future (Brochure)...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Capturing the Sun, Creating a Clean Energy Future (Brochure), SunShot, Solar Energy Technologies Program (SETP), U.S. Department of Energy (DOE) Capturing the Sun, Creating a Clean ...

  7. State and Local Resources for a Clean Energy Future Brochure

    Broader source: Energy.gov [DOE]

    The State and Local Resources for a Clean Energy Future brochure explains how to best use state and local resources to meet your community's clean energy goals. View the infographic above or...

  8. Brochure, A Basic Overview of the Integrated Safety Management (ISM) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy A Basic Overview of the Integrated Safety Management (ISM) Brochure, A Basic Overview of the Integrated Safety Management (ISM) September 7, 2012 The Integrated Safety Management Brochure provides the overview, objective, guiding principles, core functions, safety culture elements, and points-of-contact for the ISM approach. ISM is the Department of Energy's corporate approach for efficiently achieving its mission goals while maintaining the highest standard of safe

  9. Brochure HI Standards Subscription Options | Department of Energy

    Energy Savers [EERE]

    HI Standards Subscription Options Brochure HI Standards Subscription Options HI's Web-based Standards "packages" will provide you with all of the Standards appropriate for a specific pump technology. Select the package that is right for your business and the number of simultaneous users ("seats") you desire, and the state of the art, solution-oriented content you require will be at your fingertips. PDF icon J_Brochure_HI_Stds_Subscription_Options.pdf More Documents &

  10. WPN 09-6: Lead Safe Weatherization (LSW) Additional Materials and Information

    Broader source: Energy.gov [DOE]

    To provide clarification and additional information to grantees as they implement WPN 08-6, Interim Lead-Safe Weatherization Guidance. This guidance augments, but does not replace, WPN 08-6 and builds on the foundation provided in WPN 02-6, Weatherization Activities and Federal Lead Based Paint Regulations.

  11. Rebuilding It Better: Greensburg, Kansas. USD 422 Greensburg K-12 School (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-04-01

    This brochure details the energy efficient and sustainable aspects of the USD 422 K-12 school in Greensburg, Kansas.

  12. Rebuilding It Better: Greensburg, Kansas, USD 422 Greensburg K-12 School (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-04-01

    This brochure details the energy efficient and sustainable aspects of the USD 422 K-12 school in Greensburg, Kansas.

  13. Microsoft Word - Brochure_Senior Officials.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Brochure_Senior Officials.doc Microsoft Word - Brochure_Senior Officials.doc PDF icon Microsoft Word - Brochure_Senior Officials.doc More Documents & Publications Preservation of Department of Energy Federal Records Records Management Exit Procedures Procedures for Departing Employees

  14. Hawai'i's EVolution: Hawai'i Powered. Technology Driven. (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-05-01

    This Hawaii Clean Energy Initiative (HCEI) brochure outlines Hawaii's energy and transportation goals and the implementation of electric vehicles (EV) and electric vehicle infrastructure since HCEI began in 2008. It includes information about Hawaii's role in leading the nation in available EV charging infrastructure per capita; challenges for continuing to implement EV technology; features on various successful EV users, including the Hawaiian Electric Company, Enterprise Rent-A-Car, and Senator Mike Gabbard; how EVs can integrate into and help propel Hawaii's evolving smart grid; and much more.

  15. PAT-1 safety analysis report addendum author responses to request for additional information.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Schmale, David T.; Kalan, Robert J.; Akin, Lili A.; Miller, David Russell; Knorovsky, Gerald Albert; Yoshimura, Richard Hiroyuki; Lopez, Carlos; Harding, David Cameron; Jones, Perry L.; Morrow, Charles W.

    2010-09-01

    The Plutonium Air Transportable Package, Model PAT-1, is certified under Title 10, Code of Federal Regulations Part 71 by the U.S. Nuclear Regulatory Commission (NRC) per Certificate of Compliance (CoC) USA/0361B(U)F-96 (currently Revision 9). The National Nuclear Security Administration (NNSA) submitted SAND Report SAND2009-5822 to NRC that documented the incorporation of plutonium (Pu) metal as a new payload for the PAT-1 package. NRC responded with a Request for Additional Information (RAI), identifying information needed in connection with its review of the application. The purpose of this SAND report is to provide the authors responses to each RAI. SAND Report SAND2010-6106 containing the proposed changes to the Addendum is provided separately.

  16. Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing

    SciTech Connect (OSTI)

    New, Joshua Ryan

    2014-01-01

    Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: This presentation focuses on 3D printing technologies and how they have rapidly evolved over the past couple of years. At a basic level, 3D printing produces physical models quickly and easily from 3D CAD, BIM (Building Information Models), and other digital data. Many AEC firms have adopted 3D printing as part of commercial building design development and project delivery. This presentation includes an overview of 3D printing, discusses its current use in building design, and talks about its future in relation to the HVAC industry. Abstract 3: This presentation discusses additive manufacturing and how it is revolutionizing the design of commercial and residential facilities. Additive manufacturing utilizes a broad range of direct manufacturing technologies, including electron beam melting, ultrasonic, extrusion, and laser metal deposition for rapid prototyping. While there is some overlap with the 3D printing talk, this presentation focuses on the materials aspect of additive manufacturing and also some of the more advanced technologies involved with rapid prototyping. These technologies include design of carbon fiber composites, lightweight metals processing, transient field processing, and more.

  17. Community Shared Solar: Policy and Regulatory Considerations (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    This brochure explores the ways in which the shared solar business model interacts with existing policy and regulations, including net metering, tax credits, and securities regulation. It presents some of the barriers that shared solar projects may face, and provides options for creating a supportive policy environment.

  18. Greensburg, Kansas: A Better, Greener Place to Live (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-10-01

    This Brochure is for Greensburg city leadership (Chamber of Commerce, Mayor's Office, and others) to use to attract visitors and businesses to Greensburg, and to ensure the city?s commitment to sustainability. Content includes EERE subject matter and mentions DOE's role in rebuilding. The layout is designed to be used as a template for other cities in similar situations.

  19. Policymakers' Guidebook for Geothermal Electricity Generation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-02-01

    This document provides an overview of the NREL Geothermal Policymakers' Guidebook for Electricity Generation with information directing people to the Web site for more in-depth information.

  20. Accelerating Commercialization of Algal Biofuels Through Partnerships (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure describes National Renewable Energy Laboratory's (NREL's) algal biofuels research capabilities and partnership opportunities. NREL is accelerating algal biofuels commercialization through: (1) Advances in applied biology; (2) Algal strain development; (3) Development of fuel conversion pathways; (4) Techno-economic analysis; and (5) Development of high-throughput lipid analysis methodologies. NREL scientists and engineers are addressing challenges across the algal biofuels value chain, including algal biology, cultivation, harvesting and extraction, and fuel conversion. Through partnerships, NREL can share knowledge and capabilities in the following areas: (1) Algal Biology - A fundamental understanding of algal biology is key to developing cost-effective algal biofuels processes. NREL scientists are experts in the isolation and characterization of microalgal species. They are identifying genes and pathways involved in biofuel production. In addition, they have developed a high-throughput, non-destructive technique for assessing lipid production in microalgae. (2) Cultivation - NREL researchers study algal growth capabilities and perform compositional analysis of algal biomass. Laboratory-scale photobioreactors and 1-m2 open raceway ponds in an on-site greenhouse allow for year-round cultivation of algae under a variety of conditions. A bioenergy-focused algal strain collection is being established at NREL, and our laboratory houses a cryopreservation system for long-term maintenance of algal cultures and preservation of intellectual property. (3) Harvesting and Extraction - NREL is investigating cost-effective harvesting and extraction methods suitable for a variety of species and conditions. Areas of expertise include cell wall analysis and deconstruction and identification and utilization of co-products. (4) Fuel Conversion - NREL's excellent capabilities and facilities for biochemical and thermochemical conversion of biomass to biofuels are being applied to algal biofuels processes. Analysts are also testing algal fuel properties to measure energy content and ensure compatibility with existing fueling infrastructure. (5) Cross-Cutting Analysis - NREL scientists and engineers are conducting rigorous techno-economic analyses of algal biofuels processes. In addition, they are performing a full life cycle assessment of the entire algae-to-biofuels process.

  1. What is Clean Cities? May 2011 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-05-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 87 coalitions.

  2. Our Future. Energy Independence...It's Up To Us. Hawaii Clean Energy Initiative (HCEI) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-07-01

    Brochure for the Hawaii Clean Energy (HCEI) Initiative that estabishes the new HCEI brand and highlights two focus areas for achieving Hawaii's clean energy goals: conserve and convert.

  3. Building Energy-Efficient Schools in New Orleans: Lessons Learned (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01

    This brochure presents the lessons learned from incorporating energy efficiency in the rebuilding and renovating of New Orleans K-12 schools after Hurricanes Katrina and Rita.

  4. EPAct Alternative Fuel Transportation Program: State and Alternative Fuel Provider Fleets: Frequently Asked Questions (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-03-01

    This brochure provides answers to frequently asked questions about the EPAct Alternative Fuel Transportation Program's State and Alternative Fuel Provider Fleets.

  5. The New American Home 2009: Las Vegas, Nevada; Building Technologies Program (Brochure)

    SciTech Connect (OSTI)

    2008-12-01

    This brochure details the New American Home 2009, which demonstrates the use of innovative building materials, cutting-edge design, and the latest construction techniques.

  6. New American Home 2010: Las Vegas, Nevada, Building Technologies Program (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-12-01

    This brochure details the New American Home 2010, which demonstrates the use of innovative building materials, cutting-edge design, and the latest construction techniques.

  7. Rebuilding it Better: Greensburg, Kansas, Kiowa County Memorial Hospital (Brochure) (Revised)

    Broader source: Energy.gov [DOE]

    This brochure details the sustainable and green aspects of the LEED Platinum-designed Kiowa County Memorial Hospital in Greensburg, Kansas.

  8. What is Clean Cities? July 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 87 active coalitions.

  9. What is Clean Cities? December 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-12-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 87 active coalitions.

  10. Clean Cities 2014 Vehicle Buyer's Guide (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-12-01

    This annual guide features a comprehensive list of 2014 light-duty alternative fuel and advanced vehicles, grouped by fuel and technology. The guide provides model-specific information on vehicle specifications, manufacturer suggested retail price, fuel economy, energy impact, and emissions. The information can be used to identify options, compare vehicles, and help inform purchase decisions.

  11. Rebuilding It Better: Greensburg, Kansas. USD 422 Greensburg K-12 School (Revised) (Brochure), Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure details the energy efficient and sustainable aspects of the USD 422 K-12 school in Greensburg, Kansas.

  12. EERE Program Management Initiative (PMI) Brochure

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... EERE has made substantial investments in two separate information system development initiatives that complement each other and come together to form a virtual comprehensive ...

  13. Assistance Focus: Latin America/Caribbean (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-01-01

    The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to African governments, including the benefits of that assistance.

  14. Assistance Focus: Asia/Pacific Region (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-01-01

    The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to governments in the Asia/Pacific region, including the benefits of that assistance.

  15. National Renewable Energy Laboratory: 35 Years of Innovation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01

    This brochure is an overview of NREL's innovations over the last 35 years. It includes the lab's history and a description of the laboratory of the future. The National Renewable Energy Laboratory (NREL) is the U.S. Department of Energy's (DOE) primary national laboratory for renewable energy and energy efficiency. NREL's work focuses on advancing renewable energy and energy efficiency technologies from concept to the commercial marketplace through industry partnerships. The Alliance for Sustainable Energy, LLC, a partnership between Battelle and MRIGlobal, manages NREL for DOE's Office of Energy Efficiency and Renewable Energy.

  16. Realizing a Clean Energy Future: Highlights of NREL Analysis (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-12-01

    Profound energy system transformation is underway. In Hawaiian mythology, Maui set out to lasso the sun in order to capture its energy. He succeeded. That may have been the most dramatic leap forward in clean energy systems that the world has known. Until now. Today, another profound transformation is underway. A combination of forces is taking us from a carbon-centric, inefficient energy system to one that draws from diverse energy sources - including the sun. NREL analysis is helping guide energy systems policy and investment decisions through this transformation. This brochure highlights NREL analysis accomplishments in the context of four thematic storylines.

  17. Hydrogen-Powered Buses Brochure ¬Ö 2010

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Powered by Hydrogen EERE Information Center 1-877-EERE-INFO (1-877-337-3463) eere.energy.gov/informationcenter Prepared by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy. October 2010 Source: NREL, Dennis Schroeder Source: NREL, Dennis Schroeder Hydrogen-Powered Buses Showcase Advanced Vehicle Technologies Visitors to federal facilities across the country may now have the opportunity to tour the sites in a hydrogen- powered shuttle bus. The U.S. Department of

  18. Plug-In Electric Vehicle Handbook for Consumers (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-02-01

    This handbook is designed to answer a consumer's basic questions, as well as point them to additional information they need, to make the best decision about whether an electric-drive vehicle is right for them.

  19. Alternative Fuel and Advanced Technology Commercial Lawn Equipment (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-10-01

    The U.S. Department of Energy's Clean Cities program produced this guide to help inform the commercial mowing industry about product options and potential benefits. This guide provides information about equipment powered by propane, ethanol, compressed natural gas, biodiesel, and electricity, as well as advanced engine technology. In addition to providing an overview for organizations considering alternative fuel lawn equipment, this guide may also be helpful for organizations that want to consider using additional alternative fueled equipment.

  20. Clean Cities 2012 Vehicle Buyer's Guide (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-03-01

    The expanding availability of alternative fuels and advanced vehicles makes it easier than ever to reduce petroleum use, cut emissions, and save on fuel costs. The Clean Cities 2012 Vehicle Buyer's Guide features a comprehensive list of model year 2012 vehicles that can run on ethanol, biodiesel, electricity, propane or natural gas. Drivers and fleet managers across the country are looking for ways to reduce petroleum use, fuel costs, and vehicle emissions. As you'll find in this guide, these goals are easier to achieve than ever before, with an expanding selection of vehicles that use gasoline or diesel more efficiently, or forego them altogether. Plug-in electric vehicles made a grand entrance onto U.S. roadways in model year (MY) 2011, and their momentum in the market is poised for continued growth in 2012. Sales of the all-electric Nissan Leaf surpassed 8,000 in the fall of 2011, and the plug-in hybrid Chevy Volt is now available nationwide. Several new models from major automakers will become available throughout MY 2012, and drivers are benefiting from a rapidly growing network of charging stations, thanks to infrastructure development initiatives in many states. Hybrid electric vehicles, which first entered the market just a decade ago, are ubiquitous today. Hybrid technology now allows drivers of all vehicle classes, from SUVs to luxury sedans to subcompacts, to slash fuel use and emissions. Alternative fueling infrastructure is expanding in many regions, making natural gas, propane, ethanol, and biodiesel attractive and convenient choices for many consumers and fleets. And because fuel availability is the most important factor in choosing an alternative fuel vehicle, this growth opens up new possibilities for vehicle ownership. This guide features model-specific information about vehicle specs, manufacturer suggested retail price (MSRP), fuel economy, and emissions. You can use this information to compare vehicles and help inform your buying decisions. This guide includes city and highway fuel economy estimates from the U.S. Environmental Protection Agency (EPA). The estimates are based on laboratory tests conducted by manufacturers in accordance with federal regulations. EPA retests about 10% of vehicle models to confirm manufacturer results. Fuel economy estimates are also available on FuelEconomy.gov. For some newer vehicle models, EPA data was not available at the time of this guide's publication; in these cases, manufacturer estimates are provided, if available.

  1. Unique Perspectives on a Transforming Energy Economy: 2014 Annual Report (Brochure)

    SciTech Connect (OSTI)

    Gossett, S.

    2014-03-01

    What makes JISEA unique? Unique perspectives. This brochure highlights the unique perspectives provided by the Joint Institute for Strategic Energy Analysis through JISEA's recent accomplishments and the people behind them.

  2. DOE Brochure Highlights Ethanol Life-Cycle Results Obtained with GREET

    SciTech Connect (OSTI)

    2009-01-18

    The U.S. Department of Energy (DOE) recently published a brochure highlighting the efficacy of Argonne National Laboratory's GREET model in evaluating the complete energy life cycle for ethanol.

  3. Energy Independence . . . It's up to us. Hawaii Clean Energy Initiative (HCEI) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-11-01

    This tri-fold brochure provides an overview of how the State of Hawaii will work toward a goal of 70% clean energy by 2030 and the importance of meeting this goal.

  4. U.S. Life Cycle Inventory Database Roadmap (Brochure) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy U.S. Life Cycle Inventory Database Roadmap (Brochure) U.S. Life Cycle Inventory Database Roadmap (Brochure) Life cycle inventory data are the primary inputs for conducting life cycle assessment studies. Studies based on high-quality data that are consistent, accurate, and relevant allow for robust, defensible, and meaningful results. PDF icon 45153.pdf More Documents & Publications Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products Vehicle

  5. Capturing the Sun, Creating a Clean Energy Future (Brochure), SunShot,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Energy Technologies Program (SETP), U.S. Department of Energy (DOE) | Department of Energy Capturing the Sun, Creating a Clean Energy Future (Brochure), SunShot, Solar Energy Technologies Program (SETP), U.S. Department of Energy (DOE) Capturing the Sun, Creating a Clean Energy Future (Brochure), SunShot, Solar Energy Technologies Program (SETP), U.S. Department of Energy (DOE) Through partnerships with industry academia, and national laboratories, the DOE Solar Energy Technologies

  6. Kaupuni Village: A Closer Look at the First Net-Zero Energy Affordable Housing Community in Hawai'i (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-05-01

    This is the first of four Hawaii Clean Energy Initiative community brochures focused on HCEI success stories. This brochure focuses on the first LEED Platinum net-zero energy affordable housing community in Hawaii. Our lead NREL contact for HCEI is Ken Kelly.

  7. Unclassified Controlled Nuclear Information Training | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unclassified Controlled Nuclear Information Training Unclassified Controlled Nuclear Information Training Training Unclassified Controlled Nuclear Information for persons with access to UCNI, June 2014 Unclassified Controlled Nuclear Information Reviewing Official's Training Resources Understanding Unclassified Controlled Nuclear Information - Brochure UCNI Marking Reference Classification's Webpage on Unclassified Controlled Nuclear Information Policy Documents Training & Reference

  8. SunLine Leads the Way in Demonstrating Hydrogen-Fueled Bus Technologies (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-01-01

    This brochure describes SunLine Transit Agency's newest advanced technology fuel cell electric bus. SunLine is collaborating with the U.S. Department of Energy's Fuel Cell Technologies Program to evaluate the bus in revenue service. This bus represents the sixth generation of hydrogen-fueled buses that the agency has operated since 2000.

  9. Tribal Energy Program, Assisting Tribes to Realize Their Energy Visions (Brochure), Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01

    This 12-page brochure provides an overview of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy's Tribal Energy Program and describes the financial, technical, and educational assistance it provides to help tribes develop their renewable energy resources and reduce their energy consumption.

  10. Tribal Energy Efficiency and Renewable Energy Development on Tribal Lands (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01

    This 12-page brochure provides an overview of the U.S. Department of Energy's (DOE's) Tribal Energy Program and describes the financial, technical, and educational assistance it provides to help tribes develop their renewable energy resources and reduce their energy consumption.

  11. Clean Cities Tools: Tools to Help You Drive Smarter, Use Less Petroleum, and Reduce Emissions (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-06-01

    Clean Cities' Alternative Fuels and Advanced Vehicles Data Center (AFDC) features a wide range of Web-based tools to help vehicle fleets and individual consumers reduce their petroleum use. This brochure lists and describes Clean Cities online tools related to vehicles, alternative fueling stations, electric vehicle charging stations, fuel conservation, emissions reduction, fuel economy, and more.

  12. Clean Cities Tools: Tools to Help You Save Money, Use Less Petroleum, and Reduce Emissions (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01

    Clean Cities Alternative Fuels and Advanced Vehicles Data Center (AFDC) features a wide range of Web-based tools to help vehicle fleets and individual consumers reduce their petroleum use. This brochure lists and describes Clean Cities online tools related to vehicles, alternative fueling stations, electric vehicle charging stations, fuel conservation, emissions reduction, fuel economy, and more.

  13. USVI Energy Road Map: Charting the Course to a Clean Energy Future (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01

    This brochure provides an overview of the integrated clean energy deployment process and progress of the Energy Development in Island Nations U.S. Virgin Islands pilot project road map, including over-arching goals, organization, strategy, technology-specific goals and accomplishments, challenges, solutions, and upcoming milestones.

  14. NREL's Hydrogen-Powered Bus Serves as Showcase for Advanced Vehicle Technologies (AVT) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-08-01

    Brochure describes the hydrogen-powered internal combustion engine (H2ICE) shuttle bus at NREL. The U.S. Department of Energy (DOE) is funding the lease of the bus from Ford to demonstrate market-ready advanced technology vehicles to visitors at NREL.

  15. Hydrogen Fueling - Coming Soon to a Station Near You (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    Fact sheet providing information useful to local permitting officials facing hydrogen fueling station proposals.

  16. Classified Information Training | Department of Energy

    Energy Savers [EERE]

    Classified Information Training Classified Information Training Training Introduction to Classified Information, June 2014 GEN-16, "No Comment" Policy for Classified Subject Areas, October 2014 Transclassified Foreign Nuclear Information, June 2014 Briefing, DOE Order 475.2B, Identifying Classified Information, What Derivative Classifiers Should Know Resources Understanding Classification - Booklet, June 2012 GEN-16, "No Comment" Policy for Classified Subject Areas - Brochure

  17. Clean Cities Guide to Alternative Fuel Commercial Lawn Equipment (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    Guide explains the different types of alternative fuel commercial mowers and lists the makes and models of the ones available on the market. Turf grass is a fixture of the American landscape and the American economy. It is the nation's largest irrigated crop, covering more than 40 million acres. Legions of lawnmowers care for this expanse during the growing season-up to year-round in the warmest climates. The annual economic impact of the U.S. turf grass industry has been estimated at more than $62 billion. Lawn mowing also contributes to the nation's petroleum consumption and pollutant emissions. Mowers consume 1.2 billion gallons of gasoline annually, about 1% of U.S. motor gasoline consumption. Commercial mowing accounts for about 35% of this total and is the highest-intensity use. Large property owners and mowing companies cut lawns, sports fields, golf courses, parks, roadsides, and other grassy areas for 7 hours per day and consume 900 to 2,000 gallons of fuel annually depending on climate and length of the growing season. In addition to gasoline, commercial mowing consumes more than 100 million gallons of diesel annually. Alternative fuel mowers are one way to reduce the energy and environmental impacts of commercial lawn mowing. They can reduce petroleum use and emissions compared with gasoline- and diesel-fueled mowers. They may also save on fuel and maintenance costs, extend mower life, reduce fuel spillage and fuel theft, and promote a 'green' image. And on ozone alert days, alternative fuel mowers may not be subject to the operational restrictions that gasoline mowers must abide by. To help inform the commercial mowing industry about product options and potential benefits, Clean Cities produced this guide to alternative fuel commercial lawn equipment. Although the guide's focus is on original equipment manufacturer (OEM) mowers, some mowers can be converted to run on alternative fuels. For more information about propane conversions. This guide may be particularly helpful for organizations that are already using alternative fuels in their vehicles and have an alternative fuel supply or electric charging in place (e.g., golf cart charging stations at most golf courses). On the flip side, experiencing the benefits of using alternative fuels in mowing equipment may encourage organizations to try them in on-road vehicles as well. Whatever the case, alternative fuel commercial lawnmowers are a powerful and cost-effective way to reduce U.S. petroleum dependence and help protect the environment.

  18. Policymakers' Guidebook for Geothermal Heating and Cooling (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-02-01

    This document provides an overview of the NREL Geothermal Policymakers' Guidebook for Heating and Cooling with information directing people to the Web site for more in-depth information.

  19. What Is Clean Cities? Clean Cities, November 2009 (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-11-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 86 active coalitions.

  20. What is Clean Cities? Clean Cities, March 2010 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-03-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 86 active coalitions.

  1. 20% Wind Energy - Diversifying Our Energy Portfolio and Addressing Climate Change (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-05-01

    This brochure describes the R&D efforts needed for wind energy to meet 20% of the U.S. electrical demand by 2030. In May 2008, DOE published its report, 20% Wind Energy by 2030, which presents an in-depth analysis of the potential for wind energy in the United States and outlines a potential scenario to boost wind electric generation from its current production of 16.8 gigawatts (GW) to 304 GW by 2030. According to the report, achieving 20% wind energy by 2030 could help address climate change by reducing electric sector carbon dioxide (CO2) emissions by 825 million metric tons (20% of the electric utility sector CO2 emissions if no new wind is installed by 2030), and it will enhance our nation's energy security by diversifying our electricity portfolio as wind energy is an indigenous energy source with stable prices not subject to fuel volatility. According to the report, increasing our nation's wind generation could also boost local rural economies and contribute to significant growth in manufacturing and the industry supply chain. Rural economies will benefit from a substantial increase in land use payments, tax benefits and the number of well-paying jobs created by the wind energy manufacturing, construction, and maintenance industries. Although the initial capital costs of implementing the 20% wind scenario would be higher than other generation sources, according to the report, wind energy offers lower ongoing energy costs than conventional generation power plants for operations, maintenance, and fuel. The 20% scenario could require an incremental investment of as little as $43 billion (net present value) more than a base-case no new wind scenario. This would represent less than 0.06 cent (6 one-hundredths of 1 cent) per kilowatt-hour of total generation by 2030, or roughly 50 cents per month per household. The report concludes that while achieving the 20% wind scenario is technically achievable, it will require enhanced transmission infrastructure, streamlined siting and permitting regimes, improved reliability and operability of wind systems, and increased U.S. wind manufacturing capacity. To meet these challenges, the DOE Wind Energy Program will continue to work with industry partners to increase wind energy system reliability and operability and improve manufacturing processes. The program also conducts research to address transmission and grid integration issues, to better understand wind resources, to mitigate siting and environmental issues, to provide information to industry stakeholders and policy makers, and to educate the future generations.

  2. Additive Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MST ¬Ľ MST Research Programs ¬Ľ Additive Manufacturing Additive Manufacturing A method allowing unparalleled manufacturing control, data visualization, and high-value parts repair. Through additive manufacturing, Los Alamos is developing materials for the future. Taking complex manufacturing challenges from design to fabrication. A science and engineering approach for additive manufacturing solutions. Get Expertise John Carpenter Technical Staff Member Metallurgy Email Division Leader Materials

  3. Solar Water Heating with Low-Cost Plastic Systems (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01

    Newly developed solar water heating technology can help Federal agencies cost effectively meet the EISA requirements for solar water heating in new construction and major renovations. This document provides design considerations, application, economics, and maintenance information and resources.

  4. Technical Assistance Guide: Working with DOE National Laboratories (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    Guide to inform agencies of the capabilities and expertise of DOE national laboratories, as well as process and contacts for Federal agencies to enter work for others agreements with DOE national labs.

  5. Capturing the Sun, Creating a Clean Energy Future (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01

    Through partnerships with industry academia, and national laboratories, the DOE Solar Energy Technologies Program sponsors research and development (R&D) in addition to activities designed to accelerate solar market development and reduce the cost of solar power.

  6. Capturing the Sun, Creating a Clean Energy Future (Brochure)

    SciTech Connect (OSTI)

    DOE Solar Energy Technologies Program

    2011-07-20

    Through partnerships with industry academia, and national laboratories, the DOE Solar Energy Technologies Program sponsors research and development (R&D) in addition to activities designed to accelerate solar market development and reduce the cost of solar power.

  7. Research Support Facility Data Center: An Example of Best Practices Implementation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This brochure details the design and operations of the Research Support Facility (RSF) data center. The National Renewable Energy Laboratory (NREL) is world-renowned for its commitment to green building construction. To further this commitment to green building and leading by example, NREL included an ultra-energy-efficient data center in the laboratory's new Research Support Facility (RSF), which recently received a Leadership in Energy and Environmental Design{reg_sign} (LEED) Platinum designation from the U.S. Green Building Council.

  8. Microsoft Word - Brochure_Senior Officials.doc

    Office of Environmental Management (EM)

    Preservation of Department of Energy Federal Records __________________________________________ A Reminder for Senior Officials Office of IT Planning, Architecture and E-Government March 2009 Office of the Chief Information Officer 2 Purpose & Scope The Federal Records Act requires the Department of Energy (DOE) to preserve records that reflect the agency functions, policies, decisions, procedures, and operations, as well as documents and datasets that serve as evidence of the

  9. Additive Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    manufacturing and national security To realize additive manufacturing's potential as a disruptive technology for Los Alamos National Laboratory's national security missions,...

  10. Hydrogen Technical Analysis -- Dissemination of Information

    SciTech Connect (OSTI)

    George Kervitsky, Jr.

    2006-03-20

    SENTECH is a small energy and environmental consulting firm providing technical, analytical, and communications solutions to technology management issues. The activities proposed by SENTECH focused on gathering and developing communications materials and information, and various dissemination activities to present the benefits of hydrogen energy to a broad audience while at the same time establishing permanent communications channels to enable continued two-way dialog with these audiences in future years. Effective communications and information dissemination is critical to the acceptance of new technology. Hydrogen technologies face the additional challenge of safety preconceptions formed primarily as a result of the crash of the Hindenburg. Effective communications play a key role in all aspects of human interaction, and will help to overcome the perceptual barriers, whether of safety, economics, or benefits. As originally proposed SENTECH identified three distinct information dissemination activities to address three distinct but important audiences; these formed the basis for the task structure used in phases 1 and 2. The tasks were: (1) Print information--Brochures that target the certain segment of the population and will be distributed via relevant technical conferences and traditional distribution channels. (2) Face-to-face meetings--With industries identified to have a stake in hydrogen energy. The three industry audiences are architect/engineering firms, renewable energy firms, and energy companies that have not made a commitment to hydrogen (3) Educational Forums--The final audience is students--the future engineers, technicians, and energy consumers. SENTECH will expand on its previous educational work in this area. The communications activities proposed by SENTECH and completed as a result of this cooperative agreement was designed to compliment the research and development work funded by the DOE by presenting the technical achievements and validations of hydrogen energy technologies to non-traditional audiences. These activities were also designed to raise the visibility of the DOE Hydrogen Program to new audiences and to help the program continue to advance its mission and vision. We believe that the work conducted under this cooperative agreement was successful at meeting the objectives presented and funded over the period of performance. During Phase 1, SENTECHs activities resulted in the development and distribution of two glossy brochures that target the on-site distributed generation and public transit markets for hydrogen energy technologies; face-to-face industry outreach meetings with various firms with an interest in hydrogen energy, but who may not have made a commitment to be involved; and implementation of two educational forums on hydrogen for students - the future engineers, technicians, and energy consumers. The educational forums were conducted with in-kind cost-shared contributions from NHA and Dr. Robert Reeves, Professor Emeritus, Rensealler During Phase 2, SENTECH activities initially were focused on the development of additional brochures and the development of a series of training modules. This set of information dissemination activities built on the experience demonstrated in our phase one activities, and focused the effort within two critical issue areas facing the development of hydrogen as an energy carrier--effective communications and information dissemination on codes and standards. SENTECH joined with the National Fire Protection Association (NFPA) to scope out the training modules and identified a series of 12 that could be used to train a variety of audiences. The NFPA is an international nonprofit corporation, which has developed a reputation as a worldwide leader in providing fire, electrical, and life safety to the public since 1896. Its membership totals more than 75,000 individuals from around the world and in more than 80 national trade and professional organizations.

  11. additive manufacturuing

    National Nuclear Security Administration (NNSA)

    an award last month for his 3D printing innovation. It could revolutionize additive manufacturing.

    Lawrence Livermore Lab engineer Bryan Moran wasn't necessarily...

  12. Phosphazene additives

    DOE Patents [OSTI]

    Harrup, Mason K; Rollins, Harry W

    2013-11-26

    An additive comprising a phosphazene compound that has at least two reactive functional groups and at least one capping functional group bonded to phosphorus atoms of the phosphazene compound. One of the at least two reactive functional groups is configured to react with cellulose and the other of the at least two reactive functional groups is configured to react with a resin, such as an amine resin of a polycarboxylic acid resin. The at least one capping functional group is selected from the group consisting of a short chain ether group, an alkoxy group, or an aryloxy group. Also disclosed are an additive-resin admixture, a method of treating a wood product, and a wood product.

  13. Potlining Additives

    SciTech Connect (OSTI)

    Rudolf Keller

    2004-08-10

    In this project, a concept to improve the performance of aluminum production cells by introducing potlining additives was examined and tested. Boron oxide was added to cathode blocks, and titanium was dissolved in the metal pool; this resulted in the formation of titanium diboride and caused the molten aluminum to wet the carbonaceous cathode surface. Such wetting reportedly leads to operational improvements and extended cell life. In addition, boron oxide suppresses cyanide formation. This final report presents and discusses the results of this project. Substantial economic benefits for the practical implementation of the technology are projected, especially for modern cells with graphitized blocks. For example, with an energy savings of about 5% and an increase in pot life from 1500 to 2500 days, a cost savings of $ 0.023 per pound of aluminum produced is projected for a 200 kA pot.

  14. LM Brochure

    Office of Environmental Management (EM)

    Legacy Management U.S. DEPARTMENT OF 03/2011 This document was printed on paper manufactured with post-consumer waste as part of LM's commitment to environmental responsibility. Sites in LM Through FY 2020 Requiring LTS&M

  15. Scientific and Technical Information | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific and Technical Information About About Home Organization Budget Field Offices Federal Advisory Committees History Scientific and Technical Information Honors & Awards Jobs Brochures, Logos, & Information Resources Contact Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 Scientific and Technical Information Print Text Size: A A A FeedbackShare Page The Department of Energy is responsible for the

  16. Small Wind Electric Systems: A Guide Produced for the Tennessee Valley Authority (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-06-01

    Small Wind Electric Systems: A Guide Produced for the Tennessee Valley Authority provides consumers with information to help them determine whether a small wind electric system can provide all or a portion of the energy they need for their home or business based on their wind resource, energy needs, and their economics. Topics discussed in the guide include how to make a home more energy efficient, how to choose the correct turbine size, the parts of a wind electric system, how to determine whether enough wind resource exists, how to choose the best site for a turbine, how to connect a system to the utility grid, and whether it's possible to become independent of the utility grid using wind energy. In addition, the cover of the guide contains a regional wind resource map and a list of incentives and contacts for more information.

  17. Integrated PEV Charging Solutions and Reduced Energy for Occupant Comfort (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01

    Brochure on Vehicle Testing and Integration Facility, featuring the Vehicle Modification Facility, Vehicle Test Pad and ReCharge Integrated Demonstration System. Plug-in electric vehicles (PEVs) offer the opportunity to shift transportation energy demands from petroleum to electricity, but broad adoption will require integration with other systems. While automotive experts work to reduce the cost of PEVs, fossil fueled cars and trucks continue to burn hundreds of billions of gallons of petroleum each year - not only to get from point A to point B, but also to keep passengers comfortable with air conditioning and heat. At the National Renewable Energy Laboratory (NREL), three installations form a research laboratory known as the Vehicle Testing and Integration Facility (VTIF). At the VTIF, engineers are developing strategies to address two separate but equally crucial areas of research: meeting the demands of electric vehicle-grid integration and minimizing fuel consumption related to vehicle climate control. Part of NREL's Center for Transportation Technologies and Systems (CTTS), the VTIF is dedicated to renewable and energy efficient solutions. This facility showcases technology and systems designed to increase the viability of sustainably powered vehicles. NREL researchers instrument every class of on-road vehicle, conduct hardware and software validation for electric vehicle (EV) components and accessories, and develop analysis tools and technology for the Department of Energy, other government agencies and industry partners. Research conducted at the VTIF examines the interaction of building energy systems, utility grids, renewable energy sources and PEVs, integrating energy management solutions, and maximizing potential greenhouse gas (GHG) reduction, while smoothing the transition and reducing costs for EV owners. NREL's collaboration with automakers, charging station manufacturers, utilities and fleet operators to assess technologies using VTIF resources is designed to enable PEV communication with the smart grid and create opportunities for vehicles to play an active role in building and grid management. Ultimately, this creates value for the vehicle owner and will help renewables be deployed faster and more economically, making the U.S. transportation sector more flexible and sustainable.

  18. Transportation Energy Futures: Combining Strategies for Deep Reductions in Energy Consumption and GHG Emissions (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-03-01

    This fact sheet summarizes actions in the areas of light-duty vehicle, non-light-duty vehicle, fuel, and transportation demand that show promise for deep reductions in energy use. Energy efficient transportation strategies have the potential to simultaneously reduce oil consumption and greenhouse gas (GHG) emissions. The Transportation Energy Futures (TEF) project examined how the combination of multiple strategies could achieve deep reductions in GHG emissions and petroleum use on the order of 80%. Led by NREL, in collaboration with Argonne National Laboratory, the project's primary goal was to help inform domestic decisions about transportation energy strategies, priorities, and investments, with an emphasis on underexplored opportunities. TEF findings reveal three strategies with the potential to displace most transportation-related petroleum use and GHG emissions: 1) Stabilizing energy use in the transportation sector through efficiency and demand-side approaches. 2) Using additional advanced biofuels. 3) Expanding electric drivetrain technologies.

  19. Transportation Energy Futures: Key Opportunities and Tools for Decision Makers (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-12-01

    The Transportation Energy Futures (TEF) project examines underexplored greenhouse gas-abatement and oil-savings opportunities by consolidating transportation energy knowledge, conducting advanced analysis, and exploring additional opportunities for sound strategic action. Led by NREL, in collaboration with Argonne National Laboratory, the project's primary goal is to provide analysis to accompany DOE-EERE's long-term transportation energy planning by addressing high-priority questions, informing domestic decisions about transportation energy strategies, priorities, and investments. Research and analysis were conducted with an eye toward short-term actions that support long-term energy goals The project looks beyond technology to examine each key question in the context of the marketplace, consumer behavior, industry capabilities, and infrastructure. This updated fact sheet includes a new section on initial project findings.

  20. Property:AdditionalRef | Open Energy Information

    Open Energy Info (EERE)

    using this property. 2 2-M Probe Survey + Mark F. Coolbaugh,Chris Sladek,James E. Faulds,Richard E. Zehner,Gary L. Oppliger. 2007. Use of Rapid Temperature Measurements at a...

  1. Additional Information on the ERDF PA approach

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to the ERDF ROD for a CERCLA ARAR Waiver to Allow Treatment of Hazardous Debris within the ERDF Landfill U.S. Department of Energy Richland Operations Office River Corridor Closure Project DOE's Largest Environmental Cleanup Closure Project February 11, 2014 RIVER CORRIDOR CLOSURE PROJECT Protecting the Columbia River ERDF ARAR Waiver for Hazardous Debris Treatment, February 11, 2014 E1401047_2 of 8 DOE's Largest Environmental Cleanup Closure Project RIVER CORRIDOR CLOSURE PROJECT One Team for

  2. Additional Information on the ERDF PA approach

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mremyr) - Acute Inadvertent Intruder (Standard: 500 mremyr) - for Waste Acceptance - Chronic Inadvertent Intruder (Standard: 100 mremyr) - for Waste Acceptance - Radon Flux...

  3. Additional Information on the ERDF PA approach

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    waste characteristics * Long Length Pumps, Thermocouples, Screens, Risers, Sluicers, Dip Tubes, etc. from Tank Farms * Heavy (50 tons after encapsulation) concrete vaults,...

  4. Onsite Distributed Generation Systems For Laboratories, Laboratories for the 21st Century: Best Practices (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01

    This guide provides general information on implementing onsite distributed generation systems in laboratory environments. Specific technology applications, general performance information, and cost data are provided to educate and encourage laboratory energy managers to consider onsite power generation or combined heat and power (CHP) systems for their facilities. After conducting an initial screening, energy managers are encouraged to conduct a detailed feasibility study with actual cost and performance data for technologies that look promising. Onsite distributed generation systems are small, modular, decentralized, grid-connected, or off-grid energy systems. These systems are located at or near the place where the energy is used. These systems are also known as distributed energy or distributed power systems. DG technologies are generally considered those that produce less than 20 megawatts (MW) of power. A number of technologies can be applied as effective onsite DG systems, including: (1) Diesel, natural gas, and dual-fuel reciprocating engines; (2) Combustion turbines and steam turbines; (3) Fuel cells; (4) Biomass heating; (5) Biomass combined heat and power; (6) Photovoltaics; and (7) Wind turbines. These systems can provide a number of potential benefits to an individual laboratory facility or campus, including: (1) High-quality, reliable, and potentially dispatchable power; (2) Low-cost energy and long-term utility cost assurance, especially where electricity and/or fuel costs are high; (3) Significantly reduced greenhouse gas (GHG) emissions. Typical CHP plants reduce onsite GHG by 40 to 60 percent; (4) Peak demand shaving where demand costs are high; (5) CHP where thermal energy can be used in addition to electricity; (6) The ability to meet standby power needs, especially where utility-supplied power is interrupted frequently or for long periods and where standby power is required for safety or emergencies; and (7) Use for standalone or off-grid systems where extending the grid is too expensive or impractical. Because they are installed close to the load, DG systems avoid some of the disadvantages of large, central power plants, such as transmission and distribution losses over long electric lines.

  5. What Is Clean Cities? Clean Cities Fact Sheet April 2009 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    Fact sheet describes the Clean Cities program and includes the contact information for its 86 active coalitions.

  6. Own Your Power! A Consumer Guide to Solar Electricity for the Home (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-01-01

    A consumer guide about solar electricity for the home. Includes information about types of solar electric systems, how to choose a system, financing, and costs.

  7. Own Your Power! A Consumer Guide to Solar Electricity for the Home (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE)

    A consumer guide about solar electricity for the home. Includes information about types of solar electric systems, how to choose a system, financing, and costs.

  8. Additive Manufacturing Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additive Manufacturing 1 Technology Assessment 2 1. Contents 3 1. Introduction to the Technology/System ............................................................................................... 2 4 1.1 Introduction to Additive Manufacturing ....................................................................................... 2 5 1.2 Additive Manufacturing Processes ............................................................................................... 2 6 1.3 Benefits of Additive

  9. INSIGHT On Transforming Our Global Energy Economy, 2015 Annual Report (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-03-01

    From its inception, JISEA has provided critical clarity and insights to inform decision making through leading-edge interdisciplinary research and objective, credible, cross-functional analysis. JISEA, drawing on the unique capabilities of its founding institutions and research affiliates around the world, continues to inform the landscape of transformation.

  10. Cincinnati Big Area Additive Manufacturing (BAAM) (Technical...

    Office of Scientific and Technical Information (OSTI)

    as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this document is also available for sale to...

  11. UPS CNG Truck Fleet Final Results: Alternative Fuel Truck Evaluation Project (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2002-08-01

    This report provides transportation professionals with quantitative, unbiased information on the cost, maintenance, operational and emissions characteristics of CNG as one alternative to conventional diesel fuel for heavy-duty trucking applications.

  12. National Renewable Energy Laboratory (NREL): Creating a Sustainable Energy Future (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    This fact sheet about NREL is a national version that can be distributed to visitors and any other interested parties. It provides general information about laboratory, its mission, and operations.

  13. Additive Manufacturing: Going Mainstream

    Broader source: Energy.gov [DOE]

    Additive manufacturing, or 3D printing, is receiving attention from media, investment communities and governments around the world transforming it from obscurity to something to be talked about.

  14. Additive Manufacturing Technology Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Munich, November 2013. Available at 761 http:www.rolandberger.commediapdfRolandBergerAdditiveManufacturing20131129. 762 pdf. 763 46. Industrial Tools, Dies, and Molds - ...

  15. Distributed Solar Photovoltaics for Electric Vehicle Charging: Regulatory and Policy Considerations (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    Increasing demand for electric vehicle (EV) charging provides an opportunity for market expansion of distributed solar technology. A major barrier to the current deployment of solar technology for EV charging is a lack of clear information for policy makers, utilities and potential adopters. This paper introduces the pros and cons of EV charging during the day versus at night, summarizes the benefits and grid implications of combining solar and EV charging technologies, and offers some regulatory and policy options available to policy makers and regulators wanting to incentivize solar EV charging.

  16. Best Practices Guide for Energy-Efficient Data Center Design: Revised March 2011 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-03-01

    This guide provides an overview of best practices for energy-efficient data center design which spans the categories of Information Technology (IT) systems and their environmental conditions, data center air management, cooling and electrical systems, on-site generation, and heat recovery. IT system energy efficiency and environmental conditions are presented first because measures taken in these areas have a cascading effect of secondary energy savings for the mechanical and electrical systems. This guide concludes with a section on metrics and benchmarking values by which a data center and its systems energy efficiency can be evaluated. No design guide can offer 'the most energy-efficient' data center design but the guidelines that follow offer suggestions that provide efficiency benefits for a wide variety of data center scenarios.

  17. Laboratories for the 21st Century: Best Practices; Energy Recovery in Laboratory Facilities (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-06-01

    This guide regarding energy recovery is one in a series on best practices for laboratories. It was produced by Laboratories for the 21st Century ('Labs 21'), a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy. Laboratories typically require 100% outside air for ventilation at higher rates than other commercial buildings. Minimum ventilation is typically provided at air change per hour (ACH) rates in accordance with codes and adopted design standards including Occupational Safety and Health Administration (OSHA) Standard 1910.1450 (4 to 12 ACH - non-mandatory) or the 2011 American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) Applications Handbook, Chapter 16 - Laboratories (6 to 12 ACH). While OSHA states this minimum ventilation rate 'should not be relied on for protection from toxic substances released into the laboratory' it specifically indicates that it is intended to 'provide a source of air for breathing and for input to local ventilation devices (e.g., chemical fume hoods or exhausted bio-safety cabinets), to ensure that laboratory air is continually replaced preventing the increase of air concentrations of toxic substances during the working day, direct air flow into the laboratory from non-laboratory areas and out to the exterior of the building.' The heating and cooling energy needed to condition and move this outside air can be 5 to 10 times greater than the amount of energy used in most office buildings. In addition, when the required ventilation rate exceeds the airflow needed to meet the cooling load in low-load laboratories, additional heating energy may be expended to reheat dehumidified supply air from the supply air condition to prevent over cooling. In addition to these low-load laboratories, reheat may also be required in adjacent spaces such as corridors that provide makeup air to replace air being pulled into negative-pressure laboratories. Various types of energy recovery devices and systems can substantially reduce heating and cooling energy required for conditioning spaces in laboratories. Heating and cooling systems can be downsized when energy recovery is used because these systems reduce peak heating and cooling requirements. Heating and cooling systems can also be downsized by capturing heat generated in high-load spaces and transferring it to spaces requiring reheat. There are many opportunities for energy recovery in laboratories. This guide includes descriptions of several air-to-air energy recovery devices and methods, such as using enthalpy wheels (Figure 1), heat pipes, or run-around loops in new construction. These devices generally recover energy from exhaust air. This recovered energy is used to precondition supply air during both cooling and heating modes of operation. In addition to air-to-air energy recovery options, this guide includes a description of a water-to-water heat recovery system that collects heat from high-load spaces and transfers it to spaces that require reheat. While air-to-air recovery devices provide significant energy reduction, in some laboratory facilities the amount of energy available in the exhaust air exceeds the pre-heat and pre-cooling needed to maintain supply air conditions. During these periods of time, controls typically reduce the energy recovery capacity to match the reduced load. If the energy recovered in the exhaust is not needed then it is rejected from the facility. By using a water-to-water recovery system, it is possible to significantly reduce overall building energy use by reusing heating or cooling energy generated in the building before it is rejected to the outdoors. Laboratory managers are encouraged to perform a life-cycle cost analysis of an energy-recovery technology to determine the feasibility of its application in their laboratory. Usually, the shortest payback periods occur when the heating and cooling load reduction provided by an energy recovery system allows the laboratory to install and use smaller heating (e.g., hot water or steam) and cooling (e.g., c

  18. Reducing Data Center Loads for a Large-Scale, Net Zero Office Building (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-12-01

    Case study highlighting the design, implementation strategies, and continuous performance monitoring of NREL's Research Support Facility data center. In constructing a new research facility for its campus, the National Renewable Energy Laboratory (NREL) project team identified the opportunity to design a world-class, energy-efficient data center to support its operations. NREL's efforts resulted in a highly efficient data center that demonstrated considerable energy savings in its first 11 months of operations. Using legacy data center performance as a baseline, the new facility cut energy use by nearly 1,450,000 kWh, delivering cost savings of approximately $82,000. The data center's average total load was 165 kW less than the legacy center's average total load, resulting in a 60% reduction in overall power. Finally, the limited use of cooling and fan energy enabled the new data center to achieve a 1.16 average power utilization effectiveness (PUE) rating, compared to the legacy data center's PUE of 2.28. The laboratory had been relying on individual servers with an energy utilization rate of less than 5%. NREL employed building best practices, innovative design techniques and energy-efficient technologies to support its energy goals for the new data center. To counteract the extensive heat generated by data center equipment, the laboratory implemented a cooling system using outdoor air and evaporative cooling to meet most of the center's needs. Inside the data center, NREL replaced much of its legacy equipment with new, energy-efficient technology. By exchanging this infrastructure for virtualized blade servers, NREL reduced its server energy footprint by 96%. Additionally, NREL replaced its 80%-efficient uninterruptible power supply (UPS) with a UPS that is 95% efficient; deployed ultra efficient power distribution units (PDU) to handle higher UPS voltages; and implemented vacancy sensors to drive down lighting loads. Using best practices and energy-efficient technology, NREL was able to successfully design an optimized data center with a minimal energy footprint. At 958,000 kWh, the annual energy use for the RSF data center is approximately 60% less than the legacy data center's annual energy use, surpassing the laboratory's project goal. As specified, the building is equipped with enough onsite renewable energy generation to offset annual energy consumption. The facility has achieved a PUE of 1.16 and ERE of 0.91 in its first 11 months of operation and is using PUE to as a metric to gauge success towards its ultimate goal. Based on the status of its RSF data center project, NREL is advising other government organizations on data center efficiency. The laboratory places great emphasis on the use of key metrics - such as PUE and ERE - to track performance. By carefully monitoring these metrics and making adjustments, NREL is able to continuously improve the performance of its data center operations.

  19. Laboratories for the 21st Century: Best Practices; Modeling Exhaust Dispersion for Specifying Acceptable Exhaust/Intake Design (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01

    This guide provides general information on specifying acceptable exhaust and intake designs. It also provides various quantitative approaches that can be used to determine expected concentration levels resulting from exhaust system emissions. In addition, the guide describes methodologies that can be employed to operate laboratory exhaust systems in a safe and energy efficient manner by using variable air volume (VAV) technology. The guide, one in a series on best practices for laboratories, was produced by Laboratories for the 21st Century (Labs21), a joint program of the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE). Geared toward architects, engineers, and facility managers, the guides contain information about technologies and practices to use in designing, constructing, and operating safe, sustainable, high-performance laboratories. Studies show a direct relationship between indoor air quality and the health and productivity of building occupants. Historically, the study and protection of indoor air quality focused on emission sources emanating from within the building. For example, to ensure that the worker is not exposed to toxic chemicals, 'as manufactured' and 'as installed' containment specifications are required for fume hoods. However, emissions from external sources, which may be re-ingested into the building through closed circuiting between the building's exhaust stacks and air intakes, are an often overlooked aspect of indoor air quality.

  20. Kentucky Department for Natural Resources and Environmental Protection permit application for air contaminant source: SRC-I demonstration plant, Newman, Kentucky. Supplement I. [Additional information on 38 items requested by KY/DNREP

    SciTech Connect (OSTI)

    Pearson, Jr., John F.

    1981-02-13

    In response to a letter from KY/DNREP, January 19, 1981, ICRC and DOE have prepared the enclosed supplement to the Kentucky Department for Natural Resources and Environmental Protection Permit Application for Air Contaminant Source for the SRC-I Demonstration Plant. Each of the 38 comments contained in the letter has been addressed in accordance with the discussions held in Frankfort on January 28, 1981, among representatives of KY/DNREP, EPA Region IV, US DOE, and ICRC. The questions raised involve requests for detailed information on the performance and reliability of proprietary equipment, back-up methods, monitoring plans for various pollutants, composition of wastes to flares, emissions estimates from particular operations, origin of baseline information, mathematical models, storage tanks, dusts, etc. (LTN)

  1. Solar Now! Residential Brochure

    Broader source: Energy.gov [DOE]

    Four Oregon organizations have teamed up to help Oregon homeowners learn about and install solar energy systems. This is a good example of a marketing/educational product that communities could create.

  2. Deployment & Market Transformation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01

    NREL's deployment and market transformation (D and MT) activities encompass the laboratory's full range of technologies, which span the energy efficiency and renewable energy spectrum. NREL staff educates partners on how they can advance sustainable energy applications and also provides clients with best practices for reducing barriers to innovation and market transformation.

  3. LPO-Brochure-CSP

    Broader source: Energy.gov (indexed) [DOE]

    investments accelerate the deployment of innovative clean energy projects and advanced vehicle manufacturing facilities across the United States. INVESTING in AMERICAN ENERGY...

  4. TEPP Planning Brochure

    Office of Environmental Management (EM)

    Following the completion of the assessment process and the remedying of any identified improvement areas, a training tabletop drill or an exercise involving applicable emergency response organizations should be conducted. The drill or exercise will help to evaluate current emergency responder readiness. GUIDANCE FOR PLANNING, CONDUCTING AND EVALUATING TRANSPORTATION EXERCISES: This guide assists local, state, tribal and federal agencies in conducting tabletops, drills and exercises for

  5. TEPP Training Brochure

    Office of Environmental Management (EM)

    CECBEMS Accreditation The MERRTT program has been approved by the Continuing Education Coordinating Board of Emergency Medical Services for Continuing Education Hours (CEH). CEHs are awarded for each module completed and for the Practical Exercises. MERRTT Instructor Patch The TEPP instructor patches are designed for personnel who are qualified as MERRTT instructors. To receive a patch, instructors must attend a MERRTT Train- the-Trainer. When they conduct their first MERRTT classroom session,

  6. STEP Brochure (Spanish)

    Energy Savers [EERE]

    porque un hogar con un mejor nivel de energa vale ms para los compradores; y * SALUD, al ayudar a identificar moho, humedad, prdidas de CO, y problemas de calidad de...

  7. TEPP Training Brochure

    Broader source: Energy.gov [DOE]

    The Transportation Emergency Preparedness Program (TEPP) developed the Modular Emergency Response Radiological Transportation Training (MERRTT) to address concerns from States, Tribes, and local...

  8. sandia-brochure-final

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE PA R T M ENT OF E N E R GY * * UN IT E D S T AT ES OF A M E R IC A Biofuels To learn more about Sandia's Biofuels program visit energy.sandia.gov jbei.org...

  9. sandia-brochure-final

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE PA R T M ENT OF E N E R GY * * UN IT E D S T AT ES OF A M E R IC A Biofuels To learn more about Sandia's Biofuels program visit energy.sandia.gov jbei.org sandia.gov Biofuels Contact: Blake Simmons Biofuels Program Manager basimmo@sandia.gov (925) 294-2288 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration

  10. QA Brochure October 2009

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality A Basic Guide to EM's Assurance Program October 2009 Overview of the Office of Environmental Management (EM) The Department of Energy (DOE) Office of Environmental Management (EM) is responsible for the risk reduction and cleanup of the environmental legacy of the Nation's nuclear weapons program, one of the largest, most diverse, and technically complex environmental programs in the world. The EM mission encompasses the entire spectrum of nuclear and non-nuclear facilities and

  11. OCPR Brochure.pdf

    National Nuclear Security Administration (NNSA)

  12. brochure.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    realized the critical need for research on the eff ects of discharges to our water and air because by this time it was apparent we were poisoning our nest," says Karen Patterson,...

  13. Solar Successes: The Best of Today's Energy Efficient Homes

    SciTech Connect (OSTI)

    2008-01-01

    This is a brochure developed specifically for residential home builders. It provides information on basic financial factors and additional resources to consider when incorporating solar technologies into building plans.

  14. Solar Successes: The Best of Today's Energy Efficient Homes (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-01-01

    This is a brochure developed specifically for residential home builders. It provides information on basic financial factors and additional resources to consider when incorporating solar technologies into building plans.

  15. Planning for PV: The Value and Cost of Solar Electricity

    SciTech Connect (OSTI)

    2008-01-01

    This is a brochure developed specifically for residential home builders. It provides information on basic financial factors and additional resources to consider when incorporating solar technologies into building plans.

  16. Planning for PV: The Value and Cost of Solar Electricity (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-01-01

    This is a brochure developed specifically for residential home builders. It provides information on basic financial factors and additional resources to consider when incorporating solar technologies into building plans.

  17. Handbook for Handling, Storing, and Dispensing E85, July 2010, Energy Efficiency and Renewable Energy (EERE), Clean Cities (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-07-01

    Guidebook contains information about EPAct alternative fuels regulations for fleets, flexible fuel vehicles, E85 properties and specifications, and E85 handling and storage guidelines.

  18. Zinc electrode with cement additive

    DOE Patents [OSTI]

    Charkey, Allen

    1982-06-01

    A zinc electrode having a cement additive, preferably, Portland Cement, distributed in the zinc active material.

  19. Additive Manufacturing: Pursuing the Promise

    Broader source: Energy.gov [DOE]

    Fact sheet overviewing additive manufacturing techniques that are projected to exert a profound impact on manufacturing.

  20. Evaluation of advanced polymers for additive manufacturing (Technical...

    Office of Scientific and Technical Information (OSTI)

    as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this document is also available for sale to...

  1. Fact #885: August 10, 2015 Electricity Generation - Planned Additions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: August 10, 2015 Electricity Generation - Planned Additions and Retirements Fact 885: ... Fact 885 Dataset Supporting Information Electricity Generating Units Planned to Come ...

  2. Property:AdditionalBenefitPlaces | Open Energy Information

    Open Energy Info (EERE)

    + Georgia + F FirstEnergy Service Company Smart Grid Project + Pennsylvania + I ISO New England, Incorporated Smart Grid Project + Connecticut +, Maine +, New Hampshire +,...

  3. Additive Manufacturing for Fuel Cells

    Broader source: Energy.gov [DOE]

    Blake Marshall, AMO's lead for Additive Manufacturing Technologies, will provide an overview of current R&D activities in additive manufacturing and its application to fuel cell prototyping and...

  4. Lubrication with boric acid additives

    DOE Patents [OSTI]

    Erdemir, Ali (Naperville, IL)

    2000-01-01

    Self-lubricating resin compositions including a boric acid additive and a synthetic polymer including those thermoset materials.

  5. Biomass 2014 Additional Speaker Biographies

    Office of Environmental Management (EM)

    Additional Speaker Biographies 1 | P a g e Contents David Danielson ............................................................................................................................................ 2 Kate Brandt ................................................................................................................................................... 3 Jennifer Holmgren

  6. Incorporation of additives into polymers

    DOE Patents [OSTI]

    McCleskey, T. Mark; Yates, Matthew Z.

    2003-07-29

    There has been invented a method for incorporating additives into polymers comprising: (a) forming an aqueous or alcohol-based colloidal system of the polymer; (b) emulsifying the colloidal system with a compressed fluid; and (c) contacting the colloidal polymer with the additive in the presence of the compressed fluid. The colloidal polymer can be contacted with the additive by having the additive in the compressed fluid used for emulsification or by adding the additive to the colloidal system before or after emulsification with the compressed fluid. The invention process can be carried out either as a batch process or as a continuous on-line process.

  7. Information Request

    Energy Savers [EERE]

    November 25, 2008 TO: Sue Tierney, Phil Niedzielski-Eichner, Skila Harris FROM: Chris Kouts SUBJECT: Information Request As requested, enclosed is the additional information you requested yesterday. 1. Testimony: * September 24, 2008 before the Senate Committee on Commerce, Science and Transportation, * July 15, 2008 before the House Committee on Energy and Commerce * October 4, 2007 before the House Committee on the Budget and Chairman Spratt 2. Proposed Legislation "Nuclear Fuel

  8. LANL installs additional protective measures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab completes additional protections LANL installs additional protective measures Work crews completed additional flood and erosion-control measures this week to reduce the environmental effects of any flash floods following the Las Conchas Fire. July 20, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma

  9. Additional Resources | Department of Energy

    Energy Savers [EERE]

    Additional Resources Additional Resources Additional Resources Energy Assurance Planning The Local Government Energy Assurance Planning (LEAP) program, developed by the Public Technology Institute and the U.S. Department of Energy, offers resources to help local governments of all sizes in developing energy assurance plans for their communities. U.S. Department of Energy, State and Local Energy Assurance Planning The National Association of State Energy Officials (NASEO) The National Association

  10. Building Partnerships to Cut Petroleum Use in Transportation (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    advances the nation's economic, environmental, and energy security by supporting local actions to cut petro- leum use in transportation. At the national level, the program develops and makes available information, tools, and other unique resources. At the local level, nearly 100 coalitions leverage these resources to create net- works of local stakeholders and pro- vide customized technical assistance to fleets implementing alternative and renewable fuels, idle-reduction mea- sures, fuel

  11. Distributed Solar Photovoltaics for Electric Vehicle Charging: Regulatory and Policy Considerations (Brochure), NREL (National Renewable Energy Laboratory)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PHOTOVOLTAICS FOR ELECTRIC VEHICLE CHARGING REGULATORY AND POLICY CONSIDERATIONS ABSTRACT Increasing demand for electric vehicle (EV) charging provides an opportunity for market expansion of distributed solar technology. A major barrier to the current deployment of solar technology for EV charging is a lack of clear information for policymakers, utilities, and potential adopters. This paper introduces the pros and cons of EV charging during the day versus at night, summarizes the benefts and

  12. Plug-In Electric Vehicle Handbook for Fleet Managers (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Fleet Managers Plug-In Electric Vehicle Handbook for Fleets 2 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the ac- curacy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not

  13. Birdsville Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    1.0 1.1 https:www.ergon.com.audataassetspdffile00084967EGE0425-birdsville-geothermal-brochure-r3.pdf 2.0 2.1 2.2 2.3 Ergon Energy. Birdsville Organic Rankine...

  14. Plug-In Electric Vehicle Handbook for Consumers (Spanish Version) (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Manual del vehículo eléctrico enchufable para consumidores Manual del vehículo eléctrico enchufable para consumidores 2 Aviso legal Este informe fue preparado en el marco de un trabajo patrocinado por una agencia del gobierno de los Estados Unidos. Ni el gobierno de los Estados Unidos ni ninguna de sus agencias, ni ninguno de sus empleados, otorgan ninguna garantía, ya sea expresa o implícita, ni asumen ninguna obligación ni responsabilidad legal por la exactitud, integridad o utilidad de

  15. Additive Manufacturing: Technology and Applications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additive Manufacturing: Technology and Applications Natural Gas Infrastructure R&D and Methane Emissions Mitigation Workshop Ryan Dehoff, Ph.D. Research Scientist MDF Metal Additive Manufacturing Lead Oak Ridge National Laboratory November 12, 2014 2 Presentation name World-leading neutron science capability World's most powerful scientific computing complex Nation's largest advanced materials research program Focused resources for systems biology and environmental sustainability Nation's

  16. Divisions & Departments | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brochures Divisions & Departments BROCHURES JLab General Brochure JLab Brochure 12GeV Upgrade Brochure

  17. Department of Energy Awards $43 Million to Spur Offshore Wind Energy, Wind Program Newsletter, September 2011 Edition (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01

    EERE Wind Program Quarterly Newsletter - September 2011. In September, the U.S. Department of Energy announced that it will award $43 million over the next five years to 41 projects across 20 states to speed technical innovations, lower costs, and shorten the timeline for deploying offshore wind energy systems. The projects will advance wind turbine design tools and hardware, improve information about U.S. offshore wind resources, and accelerate the deployment of offshore wind by reducing market barriers such as supply chain development, transmission and infrastructure. The projects announced in September focus on approaches to advancing offshore technology and removing market barriers to responsible offshore wind energy deployment. Funding is subject to Congressional appropriations.

  18. Fight over fuel additive rekindled

    SciTech Connect (OSTI)

    Stringer, J.

    1996-03-20

    Ethyl and EPA are trading punches over EPA`s doubts about the safety of Ethyl`s gasoline additive methylcyclopentadienyl manganese (MMT). Late last week, EPA released a statement reaffirming its position that there has not been enough research on health effects of MMT and asking gas stations to label pumps that contain the additive so consumers will be aware they are using it. Responding to that statement, Ethyl has written Administrator Carol Browner asking why she appears to be supporting the Environmental Defense Fund`s (EDF; Washington) campaign against MMT and advocating the delay of the additive use in light of its known emission-reducing characteristics. The tension began in the early `90s, when the EPA refused to allow Ethyl to market MMT and required it to perform more long-term health studies. Last October a court ordered the agency to grant Ethyl approval to use MMT in nonreformulated gasoline.

  19. Vehicle Technologies Office: Information Resources

    Broader source: Energy.gov [DOE]

    From here you can access additional information on advanced transportation technologies; view programmatic publications and technical information; learn the basics of hybrid vehicle technology;...

  20. Energy information sheets

    SciTech Connect (OSTI)

    1995-07-01

    The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

  1. Out of bounds additive manufacturing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Holshouser, Chris; Newell, Clint; Palas, Sid; Love, Lonnie J.; Kunc, Vlastimil; Lind, Randall F.; Lloyd, Peter D.; Rowe, John C.; Blue, Craig A.; Duty, Chad E.; et al

    2013-03-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  2. Out of Bounds Additive Manufacturing

    SciTech Connect (OSTI)

    Holshouser, Chris [Lockheed Martin Corporation; Newell, Clint [Lockheed Martin Corporation; Palas, Sid [Lockheed Martin Corporation; Love, Lonnie J [ORNL; Kunc, Vlastimil [ORNL; Lind, Randall F [ORNL; Lloyd, Peter D [ORNL; Rowe, John C [ORNL; Blue, Craig A [ORNL; Duty, Chad E [ORNL; Peter, William H [ORNL; Dehoff, Ryan R [ORNL

    2013-01-01

    Lockheed Martin and Oak Ridge National Laboratory are working on an additive manufacturing (AM) system capable of manufacturing components measured not in terms of inches or feet, but multiple yards in all dimensions with the potential to manufacture parts that are completely unbounded in size.

  3. Decontamination formulation with sorbent additive

    DOE Patents [OSTI]

    Tucker; Mark D. (Albuquerque, NM), Comstock; Robert H. (Gardendale, AL)

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  4. EIS-0489: Notice of Additional Public Scoping Meetings | Department of

    Office of Environmental Management (EM)

    Energy Additional Public Scoping Meetings EIS-0489: Notice of Additional Public Scoping Meetings Jordan Cove Liquefaction Project (Coos County, OR) and Pacific Connector Pipeline Project (Coos, Klamath, Jackson, and Douglas Counties, OR) FERC, the lead agency for this EIS, previously extended the scoping period and now has announced additional scoping meetings. For more information on this project, see the project page: http://energy.gov/node/385459. Download Document PDF icon EIS-0489:

  5. Office of Communication - Brochures Available

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tadjikistan Taiwan Tanzania Thailand Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks & Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United...

  6. International Trade of Biofuels (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-05-01

    In recent years, the production and trade of biofuels has increased to meet global demand for renewable fuels. Ethanol and biodiesel contribute much of this trade because they are the most established biofuels. Their growth has been aided through a variety of policies, especially in the European Union, Brazil, and the United States, but ethanol trade and production have faced more targeted policies and tariffs than biodiesel. This fact sheet contains a summary of the trade of biofuels among nations, including historical data on production, consumption, and trade.

  7. AdvancedMaterialsBrochure.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  8. NREL International& Environmental Programs (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2004-08-01

    NREL's International & Environmental programs work to bring renewable energy technologies to developing nations, and to improve health, local economies, community development, and the environment. These programs provide expertise throughout the world in rural energy, integrated resource assessment, technology options analysis, training on renewable energy topics, renewable energy policy assistance, greenhouse gas mitigation, clean energy technology transfer, rural electrification, and air quality protection.

  9. ssrl_brochure_2007.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Linear Accelerator Center Stanford Synchrotron Radiation Laboratory THE LABORATORY The Stanford Synchrotron Radiation Laboratory (SSRL) at the Stanford Linear Ac- celerator Center (SLAC) has provided synchrotron radiation to the scientific community for more than 30 years and is one of four lightsources funded by the U.S. Department of Energy (DOE) for scientific research. SSRL is one of the pioneering synchrotron facilities in the world, known for outstanding user support and important

  10. 2015 Vehicle Buyer's Guide (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-02-01

    Drivers and fleets are increasingly turning to the hundreds of light-duty, alternative fuel, and advanced technology vehicle models that reduce petroleum use, save on fuel costs, and cut emissions. This guide provides a comprehensive list of the 2015 light-duty models that use alternative fuels or advanced fuel-saving technologies.

  11. Brochure_2003.2.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in both fundamental and applied studies. A large complement of sophisticated state-of-the-art detectors and spectrometers provides the associated instrumentation necessary for...

  12. Personal Property Management Certification Brochure

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1. Complete all curriculum requirements. 2. Prepare your PPM certification request package using the newly published forms. 3. Attach the course completion certificates and...

  13. A Symbol of Excellence brochure

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Excellence Every Zero Energy Ready Home offers a cost-effective, high performance package of energy savings, comfort, health, and durability unparalleled in today's...

  14. Fact Sheets and Brochures - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particle Physics: Benefits to Society QuarkNet - a STEM Education Tool QuarkNet - a STEM Education Tool scientific-computing-at-fermilab Scientific Computing at Fermilab...

  15. Crime Witness Brochure - Apr 2006

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    crime or Anyone who sees or suspects crime or suspicious behavior targeting BPA prop- suspicious behavior targeting BPA prop- erty, assets or personnel can be a Crime erty,...

  16. Personal Property Management Program Brochure

    Energy Savers [EERE]

    INVENTORY Physical inventory expectations (methods, frequency, and targeted results) are clarified in the chart below. DOE/NNSA ORGANIZATIONAL PROPERTY MANAGEMENT OFFICIALS (OPMOs) SC-Oak Ridge-Rebecca Whitehead (Acting) WhiteheadRN@oro.doe.gov SC-Chicago-Bonnie Anderson Bonnie.Anderson@ch.doe.gov EM-Savannah River-Tim Armstrong Timothy.armstrong@srs.gov EM-CBC-David Lojek dave.lojek@emcbc.doe.gov EM-Richland-Renato Mercado Renato_s_mercado@rl.gov EM-ORP-Richard McNulty Richard_r_mcnulty@rl.gov

  17. Missouri Renewable Fuel Standard Brochure

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    The Missouri Renewable Fuel Standard requires ethanol in most gasoline beginning January 1, 2008. ARE YOU READY? TEN THINGS MISSOURI TANK OWNERS AND OPERATORS NEED TO KNOW ABOUT ETHANOL 1. Ethanol is a type of alcohol made usually from corn in Missouri and other states. 2. E10 is a blend of 10% ethanol and 90% unleaded gasoline. E85 is a blend of 75% to 85% fuel ethanol and 25% to 15% unleaded gasoline. Blends between E10 and E85 are not allowed to be sold at retail. 3. Any vehicle or small

  18. Electrolytes - Advanced Electrolyte and Electrolyte Additives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Electrolytes - Advanced Electrolyte and Electrolyte Additives Develop & evaluate materials & additives that enhance thermal & overcharge abuse ...

  19. Electrolytes - Advanced Electrolyte and Electrolyte Additives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Development of Advanced Electrolytes and Electrolyte Additives Electrolytes - Advanced Electrolyte and Electrolyte Additives Develop & evaluate ...

  20. Electrolytes - Advanced Electrolyte and Electrolyte Additives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Electrolytes - Advanced Electrolyte and Electrolyte Additives Electrolytes - Advanced Electrolyte and Electrolyte Additives Develop & Evaluate ...

  1. Recommendation 223: Recommendations on Additional Waste Disposal...

    Office of Environmental Management (EM)

    3: Recommendations on Additional Waste Disposal Capacity Recommendation 223: Recommendations on Additional Waste Disposal Capacity ORSSAB's recommendations encourage DOE to...

  2. General Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Information JLF Contacts Request a Tour

  3. Alternative Fuels Data Center: Latest Additions

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Publications ¬Ľ Latest Additions Printable Version Share this resource Send a link to Alternative Fuels Data Center: Latest Additions to someone by E-mail Share Alternative Fuels Data Center: Latest Additions on Facebook Tweet about Alternative Fuels Data Center: Latest Additions on Twitter Bookmark Alternative Fuels Data Center: Latest Additions on Google Bookmark Alternative Fuels Data Center: Latest Additions on Delicious Rank Alternative Fuels Data Center: Latest Additions on Digg Find More

  4. Energy information sheets

    SciTech Connect (OSTI)

    Not Available

    1993-12-02

    The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the general public. Written for the general public, the EIA publication Energy Information Sheets was developed to provide information on various aspects of fuel production, prices, consumption and capability. The information contained herein pertains to energy data as of December 1991. Additional information on related subject matter can be found in other EIA publications as referenced at the end of each sheet.

  5. Additive Manufacturing: Pursuing the Promise | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Fact sheet overviewing additive manufacturing techniques that are projected to exert a profound impact on manufacturing. Additive Manufacturing: Pursuing the Promise More Documents...

  6. Advanced Qualification of Additive Manufacturing Materials Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Qualification of Additive Manufacturing Materials Workshop Advanced Qualification of Additive Manufacturing Materials Workshop WHEN: Jul 20, 2015 8:30 AM - Jul 21, 2015...

  7. Development of Advanced Electrolytes and Electrolyte Additives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrolytes and Electrolyte Additives Development of Advanced Electrolytes and Electrolyte Additives 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and ...

  8. Develop & evaluate materials & additives that enhance thermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    evaluate materials & additives that enhance thermal & overcharge abuse Develop & evaluate materials & additives that enhance thermal & overcharge abuse 2009 DOE Hydrogen Program ...

  9. Develop & Evaluate Materials & Additives that Enhance Thermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluate Materials & Additives that Enhance Thermal & Overcharge Abuse Develop & Evaluate Materials & Additives that Enhance Thermal & Overcharge Abuse 2011 DOE Hydrogen and Fuel ...

  10. Additional Guidance Regarding Application of Current Procedures...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010 Additional Guidance...

  11. Advanced Qualification of Additive Manufacturing Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additive Manufacturing Workshop Poster Abstract Submission - deadline July 10, 2015 Advanced Qualification of Additive Manufacturing Materials using in situ sensors, diagnostics...

  12. Cincinnati Big Area Additive Manufacturing (BAAM) (Technical...

    Office of Scientific and Technical Information (OSTI)

    Cincinnati Big Area Additive Manufacturing (BAAM) Citation Details In-Document Search Title: Cincinnati Big Area Additive Manufacturing (BAAM) Oak Ridge National Laboratory (ORNL) ...

  13. Energy information sheets, July 1998

    SciTech Connect (OSTI)

    1998-07-01

    The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

  14. Energy information sheets, September 1996

    SciTech Connect (OSTI)

    1996-09-01

    The National Energy Information Center (NEIC), as part of its mission, provides energy information and referral assistance to Federal, State, and local governments, the academic community, business and industrial organizations, and the public. The Energy Information Sheets was developed to provide general information on various aspects of fuel production, prices, consumption, and capability. Additional information on related subject matter can be found in other Energy Information Administration (EIA) publications as referenced at the end of each sheet.

  15. High-Temperature Performance of UNS N07718 Processed by Additive...

    Office of Scientific and Technical Information (OSTI)

    Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding....

  16. Information Resources | Department of Energy

    Office of Environmental Management (EM)

    Information Resources Information Resources Information Resources EGS Data Library Data includes fact sheets, reports, and webinars developed through the Geothermal Technologies Office. Multimedia View and download recent infographics and additional visuals created through FORGE. For other Information Resources, please visit the Geothermal Technologies Office website at energy.gov/geothermal.

  17. Electrolytes - Advanced Electrolyte and Electrolyte Additives | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon es066_amine_2012_p.pdf More Documents & Publications Electrolytes - Advanced Electrolyte and Electrolyte Additives Electrolytes - Advanced Electrolyte and Electrolyte Additives Develop & Evaluate Materials & Additives that Enhance Thermal & Overcharge Abuse

  18. Electrolytes - Advanced Electrolyte and Electrolyte Additives | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon es066_amine_2011_o.pdf More Documents & Publications Development of Advanced Electrolytes and Electrolyte Additives Electrolytes - Advanced Electrolyte and Electrolyte Additives Develop & evaluate materials & additives that enhance thermal & overcharge abuse

  19. ARM - Campaign Backgrounders

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RSS for Publications Information Materials Annual Reports Program Fact Sheets Campaign Backgrounders Education and Outreach Posters Brochures Research Highlights Summaries...

  20. Contact Information | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contact Information Contact Information

  1. Ordering Information

    Gasoline and Diesel Fuel Update (EIA)

    coal industry Natural gas trade (Table 4.3) Ordering Information This publication and other Energy Information Administration (EIA) publications may be purchased from the...

  2. Applicant Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applicant Information General Information for Applicants Bringing together top, space science students with internationally recognized researchers at Los Alamos in an educational...

  3. Hotel Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rockville Pike, Rockville, Maryland, 20852. The hotel is about 27 miles from Dulles Airport. Hotel Information Home Page Maps and Transportation Area Information Sleeping Room...

  4. Rate Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases Rate Information Current Power Rates Current Transmission Rates...

  5. Advanced Qualification of Additive Manufacturing Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additive Manufacturing Workshop Advanced Qualification of Additive Manufacturing Materials (AM) Workshop Our goal is to define opportunities and research gaps within additive manufacturing (AM) and to engage the broader scientific/engineering community to discuss future research directions. thumbnail of thumbnail of Contact Institute Director Dr. Alexander V. Balatsky Institute for Materials Science (505) 665-0077 Email Deputy Director Dr. Jennifer S. Martinez Institute for Materials Science

  6. Electrolytes - Advanced Electrolyte and Electrolyte Additives | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon es066_amine_2010_p.pdf More Documents & Publications Electrolytes - Advanced Electrolyte and Electrolyte Additives Develop & evaluate materials & additives that enhance thermal & overcharge abuse Advanced Electrolyte Additives for PHEV/EV Lithium-ion Battery

  7. DOE Announces Additional Energy Efficiency Enforcement Action...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Counsel, Haier voluntarily identified a parts defect that had caused the freezer models to consume additional energy and took immediate steps on its own to remedy the defects. ...

  8. additive manufacturuing | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Laboratory engineer Bryan Moran won an award last month for his 3D printing innovation. It could revolutionize additive manufacturing.Lawrence Livermore Lab engineer Bryan Moran...

  9. ,"Maryland Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Maryland Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  10. ,"Nebraska Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Nebraska Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  11. ,"Wisconsin Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Wisconsin Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  12. ,"Connecticut Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Connecticut Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  13. ,"Idaho Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Idaho Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  14. ,"Tennessee Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Tennessee Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  15. ,"Pennsylvania Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Pennsylvania Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  16. ,"Nevada Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Nevada Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  17. ,"Alaska Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    LNG Storage Additions (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Alaska...

  18. ,"California Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","California Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  19. ,"Oregon Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Oregon Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  20. ,"Delaware Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Delaware Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  1. ,"Arkansas Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Arkansas Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  2. ,"Louisiana Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Louisiana Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  3. ,"Missouri Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Missouri Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  4. ,"Texas Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Texas Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  5. ,"Washington Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Washington Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  6. ,"Alabama Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Alabama Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  7. ,"Georgia Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Georgia Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  8. ,"Virginia Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Virginia Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  9. ,"Indiana Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Indiana Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  10. ,"Minnesota Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Minnesota Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  11. ,"Massachusetts Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    Of Series","Frequency","Latest Data for" ,"Data 1","Massachusetts Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015" ,"Next Release...

  12. ,"Maine Natural Gas LNG Storage Additions (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Maine Natural Gas LNG Storage Additions (MMcf)",1,"Annual",2014 ,"Release Date:","9302015"...

  13. Redox Shuttle Additives | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Redox Shuttle Additives Technology available for licensing: A series of novel redox shuttle additives for lithium-ion batteries Seven-technology suite helps reduce battery costs Provides overcharge protection and increased battery safety and reliability PDF icon redox_shuttles

  14. Photoactive devices including porphyrinoids with coordinating additives

    DOE Patents [OSTI]

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  15. In the OSTI Collections: 3-D Printing and Other Additive Manufacturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technologies | OSTI, US Dept of Energy, Office of Scientific and Technical Information 3-D Printing and Other Additive Manufacturing Technologies Dr. Watson computer sleuthing scientist. Article Acknowledgement: Dr. William N. Watson, Physicist DOE Office of Scientific and Technical Information Understanding Electron Beam Melting Is Additive Manufacturing Suitable? Two Projects Other Materials Additive Manufacturing Technologies References Reports Available Through OSTI's SciTech Connect

  16. About Additive Manufacturing | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Introducing Additive Manufacturing at GE Global Research Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Introducing Additive Manufacturing at GE Global Research Prabhjot Singh, manager of the Additive Manufacturing Lab at GE Global Research, describes the technology used in his lab. You Might Also Like DirectWrite_V

  17. Building America Case Study: New Town Builders' Power of Zero Energy Center, Denver, Colorado (Brochure), Whole-House Solutions for New Homes, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Town Builders' Power of Zero Energy Center Denver, Colorado GENERAL INFORMATION Builder: New Town Builders of Denver, Colorado; newtownbuilders.com Established: 1992 Construction: New home Type: Single-family, zero energy SELLING TO EMOTIONS... New Town Builders is capturing homebuyers' emotions to sell its homes and to effectively demonstrate their value. A few examples of New Town's strategies follow: * Use a person who resembles the customer's ideal to advertise the product. * Emphasize

  18. Clean Cities Tools: Tools to Help You Save Money, Use Less Petroleum, and Reduce Emissions (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    offers a large collection of helpful Web-based tools. These calculators, interactive maps, and data searches can assist fleets, fuel providers, and other transportation decision makers in their efforts to reduce petroleum use. Find the Clean Cities coalition in your area, and get the contact information for your Clean Cities coordinator at eere.energy.gov/cleancities/coalitions.html. Clean Cities Tools Tools to help you save money, use less petroleum, and reduce emissions Access Clean Cities

  19. Handbook for Handling, Storing, and Dispensing E85 and Other Ethanol-Gasoline Blends (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    6-4854 February 2016 Handbook for Handling, Storing, and Dispensing E85 and Other Ethanol-Gasoline Blends Disclaimer This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process

  20. Freedom of Information Act

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FOIA Freedom of Information Act (FOIA) If you would like additional information related to your request you should contact the FOIA Requester Service Center at this location. If you submitted your request to another component of the DOE, or if you submitted a request to this office and it has been transferred to a component of the Department to be processed, please contact the FOIA Requester Service Center at that location. You may access the telephone number to the appropriate FOIA Requester

  1. Researching NDE, Additive Manufacturing |GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research in NDE and Additive Manufacturing Provides Life-Changing Experience for GE Intern Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new...

  2. Martin's Additions, Maryland: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Martin's Additions is a village in Montgomery County, Maryland. It falls under Maryland's 8th congressional district.12...

  3. Advanced Qualification of Additive Manufacturing Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additive Manufacturing Workshop Poster Abstract Submission - deadline July 10, 2015 Advanced Qualification of Additive Manufacturing Materials using in situ sensors, diagnostics and modeling Contact Institute Director Dr. Alexander V. Balatsky Institute for Materials Science (505) 665-0077 Email Deputy Director Dr. Jennifer S. Martinez Institute for Materials Science (505) 665-0045 Email Deputy Director Dr. Nathan A. Mara Institute for Materials Science (505) 667 8665 Email Institute

  4. Advanced Qualification of Additive Manufacturing Materials Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July ¬Ľ Advanced Qualification of Additive Manufacturing Materials Workshop Advanced Qualification of Additive Manufacturing Materials Workshop WHEN: Jul 20, 2015 8:30 AM - Jul 21, 2015 7:30 PM WHERE: La Fonda on the Plaza Santa Fe, New Mexico SPEAKER: Multiple speakers CONTACT: Caryll Blount (505) 665-3950 CATEGORY: Science TYPE: Workshop INTERNAL: Calendar Login Event Description Invited speakers from universities and research centers, both US-based and Europe-based, will provide updates on

  5. Additional Better Plants Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance ¬Ľ Better Plants ¬Ľ Additional Better Plants Resources Additional Better Plants Resources The Better Plants Program hosted a webinar on January 22, 2015 to review accomplishments to date and detail new initiatives to save partners energy and water. Question and answer session is included. Download the presentation slides. Read the text version. Legrand's CEO John Selldorff discusses the importance of focusing on energy efficiency and remaining competitive while being a part

  6. General Information

    National Nuclear Security Administration (NNSA)

    Site Waste Profile Sheet - Revision 0 - February 27, 2012 (Log No. 2012-048) A. Generator Information 1. Company name: ...

  7. Packaging and Transportation of Additional Neptunium Oxide

    SciTech Connect (OSTI)

    Watkins, R.; Jordan, J.; Hensel, S.

    2010-05-05

    The Savannah River Site's HB-Line Facility completed a second neptunium oxide production campaign in which nine (9) additional cans of neptunium oxide were produced and shipped to the Idaho National Laboratory and Oak Ridge National Laboratory in the 9975 shipping container. These additional cans were from a different feed solution than the first fifty (50) cans of neptunium oxide that were previously produced and shipped via a Letter of Amendment to the 9975 Safety Analysis Report for Packaging (SARP) content table. This paper will address the challenges associated with demonstrating the neptunium oxide produced from the additional feed solution was equivalent to the original neptunium oxide and within the content description of the Letter of Amendment.

  8. Stabilization of polyaniline solutions through additives

    DOE Patents [OSTI]

    Wrobleski, Debra A. (Los Alamos, NM); Benicewicz, Brian C. (Los Alamos, NM)

    1996-01-01

    A stabilized non-conductive polyaniline solution comprising from about 1 to bout 10 percent by weight polyaniline or a polyaniline derivative, from about 90 to about 99 percent by weight N-methylpyrrolidone, and from about 0.5 percent by weight to about 15 percent by weight of a solution stabilizing additive selected from the group consisting of hindered amine light stabilizers, polymeric amines, and dialkylamines, percent by weight of additive based on the total weight of polyaniline or polyaniline derivative is provided together with a method for stabilizing a polyaniline solution.

  9. Stabilization of polyaniline solutions through additives

    DOE Patents [OSTI]

    Wrobleski, D.A.; Benicewicz, B.C.

    1996-12-10

    A stabilized non-conductive polyaniline solution comprising from about 1 to about 10 percent by weight polyaniline or a polyaniline derivative, from about 90 to about 99 percent by weight N-methylpyrrolidone, and from about 0.5 percent by weight to about 15 percent by weight of a solution stabilizing additive selected from the group consisting of hindered amine light stabilizers, polymeric amines, and dialkylamines, percent by weight of additive based on the total weight of polyaniline or polyaniline derivative is provided together with a method for stabilizing a polyaniline solution. 4 figs.

  10. Redox Shuttle Additives - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Storage Energy Storage Advanced Materials Advanced Materials Find More Like This Return to Search Redox Shuttle Additives Argonne National Laboratory Contact ANL About This Technology <p align="LEFT"> <i><font color="#808285" size="1"><font color="#808285" size="1">Charge Transfer Mechanism for Li-ion Battery Overcharge Protection &mdash; The boron and fluorine additive is in the electrolyte. When the battery is

  11. Breaking Barriers in Polymer Additive Manufacturing

    SciTech Connect (OSTI)

    Love, Lonnie J; Duty, Chad E; Post, Brian K; Lind, Randall F; Lloyd, Peter D; Kunc, Vlastimil; Peter, William H; Blue, Craig A

    2015-01-01

    Additive Manufacturing (AM) enables the creation of complex structures directly from a computer-aided design (CAD). There are limitations that prevent the technology from realizing its full potential. AM has been criticized for being slow and expensive with limited build size. Oak Ridge National Laboratory (ORNL) has developed a large scale AM system that improves upon each of these areas by more than an order of magnitude. The Big Area Additive Manufacturing (BAAM) system directly converts low cost pellets into a large, three-dimensional part at a rate exceeding 25 kg/h. By breaking these traditional barriers, it is possible for polymer AM to penetrate new manufacturing markets.

  12. Researching NDE, Additive Manufacturing |GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research in NDE and Additive Manufacturing Provides Life-Changing Experience for GE Intern Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Research in NDE and Additive Manufacturing Provides Life-Changing Experience for GE Intern Sean Farrell 2015.08.18 As an undergraduate student, I never thought I would get the

  13. Secure Information Sharing

    Energy Science and Technology Software Center (OSTI)

    2005-09-09

    We are develoing a peer-to-peer system to support secure, location independent information sharing in the scientific community. Once complete, this system will allow seamless and secure sharing of information between multiple collaborators. The owners of information will be able to control how the information is stored, managed. ano shared. In addition, users will have faster access to information updates within a collaboration. Groups collaborating on scientific experiments have a need to share information and data.more¬†¬Ľ This information and data is often represented in the form of files and database entries. In a typical scientific collaboration, there are many different locations where data would naturally be stored. This makes It difficult for collaborators to find and access the information they need. Our goal is to create a lightweight file-sharing system that makes it¬íeasy for collaborators to find and use the data they need. This system must be easy-to-use, easy-to-administer, and secure. Our information-sharing tool uses group communication, in particular the InterGroup protocols, to reliably deliver each query to all of the current participants in a scalable manner, without having to discover all of their identities. We will use the Secure Group Layer (SGL) and Akenti to provide security to the participants of our environment, SGL will provide confldentiality, integrity, authenticity, and authorization enforcement for the InterGroup protocols and Akenti will provide access control to other resources.¬ę¬†less

  14. Applicant Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applicant Information General Information for Applicants Bringing together top, space science students with internationally recognized researchers at Los Alamos in an educational and collaborative atmosphere. Contacts Director Misa Cowee Email Administrative Assistant Mary Wubbena Email Request more information Email Acceptance into the program Application packages are reviewed by a panel of experts and acceptance into the program is based primarily on the student's academic record, list of

  15. Hotel Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Logistics Hotel Information Location The workshop was held at the Hilton Washington DC/Rockville Executive Meeting Center. Address is 1750 Rockville Pike, Rockville, Maryland, 20852. The hotel is about 27 miles from Dulles Airport. Hotel Information Home Page Maps and Transportation Area Information Sleeping Room Block A block of rooms at the federal per diem rate of $226++ per night (single or double) has been reserved for the nights of September 10 & 11, 2012. As a courtesy, this rate will

  16. Hotel Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Logistics Hotel Information Location The review was held at the Hilton Washington DC/Rockville Executive Meeting Center. Address is 1750 Rockville Pike, Rockville, Maryland, 20852. Hotel Information Home Page Maps and Transportation Area Information Sleeping Room Block A block of rooms at $183 + 15% tax per night (single or double) has been reserved for the nights of November 26 & 27, 2012. Making Your Reservation To reserve your room, please call 1-800-HILTONS (445-8667) and refer to the

  17. Local Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Local Information Local Information Bringing together top, space science students with internationally recognized researchers at Los Alamos in an educational and collaborative atmosphere. Contacts Director Misa Cowee Email Administrative Assistant Mary Wubbena Email Request more information Email Housing, transportation Every year several hundred students come to Los Alamos to work and live here. Housing can get quite scarce, and options will be more expensive and less attractive than you expect

  18. Hotel Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Hilton Washington DCRockville Executive Meeting Center. Address is 1750 Rockville Pike, Rockville, Maryland, 20852. Hotel Information Home Page Maps and Transportation Area...

  19. Informal Report

    Office of Scientific and Technical Information (OSTI)

    W- LA-8034-MS - - Informal Report "c o O o -*-* "co > Specific Heat and Thermal Conductivity of Explosives, Mixtures, and Plastic-Bonded Explosives Determined...

  20. Information Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Science and Technology (ASIS&T) American Society for Indexing (ASI) Digital Library Federation (DLF) National Archives and Records Administration (NARA) Special...

  1. Technical information

    Gasoline and Diesel Fuel Update (EIA)

    Home> Commercial Buildings Home> Technical Information > Estimation of Standard Errors Estimation of Standard Errors Sampling error is the difference between the survey estimate...

  2. Computing Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    here you can find information relating to: Obtaining the right computer accounts. Using NIC terminals. Using BooNE's Computing Resources, including: Choosing your desktop....

  3. The addition of disilanes to cumulenes

    SciTech Connect (OSTI)

    Chen, Y.

    1997-10-08

    The syntheses of silicon-containing compounds and the studies of their rearrangements have been active research areas in the Barton research group. Previously, the addition of disilanes to acetylenes was studied in the group and an intramolecular 2S + 2A mechanism has been proposed. In this thesis, the work is focused on the addition of disilanes to cumulenes. The syntheses of the precursors are discussed and the possible mechanisms for their thermal, photochemical and catalytic rearrangements are proposed. Conjugated organic polymers have been studied in the group since 1985 because of their potential for exhibiting high electroconductivity, photoconductivity, strong non-linear optical response and intense fluorescence. In the second section of this dissertation, the synthesis and property studies of poly(phenylene vinylene) analogues are discussed.

  4. Evolution of solidification texture during additive manufacturing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Furthermore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numericalmore¬†¬Ľ modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.¬ę¬†less

  5. Vehicular fuels and additives for the future

    SciTech Connect (OSTI)

    Not Available

    1988-01-01

    Interest in automotive fuel is resurging. Automobile fuels must increasingly deal with clean air regulations and ozone problems. Furthermore, feedstocks become heavier,as refinery production changes, as more unleaded is produced, and as an increasing number of pollution regulations must be satisfied greater attention will be paid to better mixtures, solvents, additives, and neat methanol. BCC report analyzes developments technologies, markets, players and the political/regulations aspects of this important market. Study also assesses the advantages and drawbacks of methanol, ethanol, MTBE and other additives which have their place as octane enhancers and fuel substitutes-all now deeply involved in the gasoline modification battle. Other issues addressed are subsidies, farm lobbying, imports, pricing, economics, Detroit's response, neat fuel testing projects, volatility problems vs. fewer ozone-forming hydrocarbon species, and emission ratings.

  6. Evolution of solidification texture during additive manufacturing

    SciTech Connect (OSTI)

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-11-10

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six <100> preferred growth directions in face centered cubic alloys. Furthermore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components.

  7. Contact Information | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contact Information

  8. NOVEL LUBRICANT ADDITIVES - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Find More Like This Return to Search NOVEL LUBRICANT ADDITIVES Argonne National Laboratory Contact ANL About This Technology <em>Upper, the functionalized nanostructures mixed with poly-alpha-olefin (PAO)-4 reduce friction as test temperature is raised. Lower, Friction coefficient remains unchanged at all test temperatures with PAO4 alone.&nbsp; </em><br /> Upper, the functionalized nanostructures mixed with poly-alpha-olefin (PAO)-4 reduce friction as test temperature is

  9. Consolidated Nuclear Security announces additional leadership changes |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Y-12 National Security Complex Consolidated Nuclear ... Consolidated Nuclear Security announces additional leadership changes Posted: February 15, 2016 - 2:29pm OAK RIDGE, Tenn. - Effective today, Feb. 15, 2016, Michelle Reichert becomes the Deputy Enterprise Manager for Consolidated Nuclear Security, LLC (CNS), reporting directly to CNS President and CEO Morgan Smith. CNS is the managing and operating contractor for two key national security facilities: the Pantex Plant in Amarillo, Texas,

  10. Energetic additive manufacturing process with feed wire

    DOE Patents [OSTI]

    Harwell, Lane D. (Albuquerque, NM); Griffith, Michelle L. (Albuquerque, NM); Greene, Donald L. (Corrales, NM); Pressly, Gary A. (Sandia Park, NM)

    2000-11-07

    A process for additive manufacture by energetic wire deposition is described. A source wire is fed into a energy beam generated melt-pool on a growth surface as the melt-pool moves over the growth surface. This process enables the rapid prototyping and manufacture of fully dense, near-net shape components, as well as cladding and welding processes. Alloys, graded materials, and other inhomogeneous materials can be grown using this process.

  11. User Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Information User Information Print ALSHub User Portal User Guide A step-by-step guide for users about how to apply and prepare for beam time at the ALS. Experiment Safety Upon receiving beam time, complete an Experiment Safety Sheet Prospective Users Users from Industry Contacts for Users User Policy Data Management Users' Executive Committee (UEC) User Meeting

  12. Laser Additive Manufacturing | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Revolutionizing the Age-Old Rules of Manufacturing Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Revolutionizing the Age-Old Rules of Manufacturing Learn how additive manufacturing, a 3D-printing technology, frees engineers to design the perfect jet engine. You Might Also Like IMG_0475 Innovation 24/7: We're Always

  13. Electrolyte additive for improved battery performance

    DOE Patents [OSTI]

    Bellows, Richard J. (Hampton, NJ); Kantner, Edward (E. Brunswick, NJ)

    1989-04-04

    In one embodiment of the present invention, there is provided an electrochemical cell having a metal bromine couple. The cell includes an electrode structure on which to deposit the metal of the couple and a counterelectrode at which to generate bromine. A microporous membrane separates the electrode and counterelectrode. Importantly, the aqueous electrolyte comprises an aqueous metal bromide solution containing a water soluble bromine complexing agent capable of forming a water immiscible complex with bromine and an additive capable of decreasing the wettability of the microporous separators employed in such cells by such water immiscible bromine complexes.

  14. RCRA information on hazardous wastes for publicly owned treatment works. Technical report

    SciTech Connect (OSTI)

    Not Available

    1985-09-01

    The guidance manual provides guidance to municipal personnel in understanding hazardous waste requirements of the Resource Conservation and Recovery Act (RCRA) and the implications of these RCRA requirements for the wastewater treatment plant operated by your municipality, for your local pretreatment program, and for local industries served by the treatment plant. The primary purpose of the manual is the RCRA notification requirement specified in the General Pretreatment Regulations. The manual focuses on Subtitle C requirements. (Subtitle C is directly applicable to industries since this program regulates generators, transporters, and disposers of hazardous waste). The manual also provides a general understanding of how federal RCRA requirements for hazardous waste affect industrial users. The manual also will be helpful in complying with any applicable federal requirements incumbent upon your POTW under Subtitle C of RCRA. The appendices contain lists of hazardous wastes regulated by federal requirements; selected EPA-approved forms for hazardous waste facilities to use; RCRA information brochure which briefly outlines the Act's impact on industries that generate or transport hazardous wastes; and EPA pamphlets summarizing information for generators of small quantities of hazardous waste.

  15. General Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Information General Information As a premier national research and development laboratory, LANL seeks to do business with qualified companies that offer value and high quality products and services. Contact Small Business Office (505) 667-4419 Email Are you a good fit for LANL? Need to find out more? LANL and its Small Business Program is only a phone call or email away. (See contact information, at left.) We want to be sure you can find a good fit with our procurement opportunities and

  16. Additional Requirements and Guidance for Digital Data Management | U.S. DOE

    Office of Science (SC) Website

    Office of Science (SC) Opportunities ¬Ľ Additional Requirements and Guidance for Digital Data Management Fusion Energy Sciences (FES) FES Home About Research Facilities Science Highlights Benefits of FES Funding Opportunities Closed Funding Opportunity Announcements (FOAs) Closed Lab Announcements Award Search / Public Abstracts Additional Requirements and Guidance for Digital Data Management Fusion Energy Sciences Advisory Committee (FESAC) Community Resources Contact Information Fusion

  17. Beam geometry selection using sequential beam addition

    SciTech Connect (OSTI)

    Popple, Richard A. Brezovich, Ivan A.; Fiveash, John B.

    2014-05-15

    Purpose: The selection of optimal beam geometry has been of interest since the inception of conformal radiotherapy. The authors report on sequential beam addition, a simple beam geometry selection method, for intensity modulated radiation therapy. Methods: The sequential beam addition algorithm (SBA) requires definition of an objective function (score) and a set of candidate beam geometries (pool). In the first iteration, the optimal score is determined for each beam in the pool and the beam with the best score selected. In the next iteration, the optimal score is calculated for each beam remaining in the pool combined with the beam selected in the first iteration, and the best scoring beam is selected. The process is repeated until the desired number of beams is reached. The authors selected three treatment sites, breast, lung, and brain, and determined beam arrangements for up to 11 beams from a pool comprised of 25 equiangular transverse beams. For the brain, arrangements were additionally selected from a pool of 22 noncoplanar beams. Scores were determined for geometries comprised equiangular transverse beams (EQA), as well as two tangential beams for the breast case. Results: In all cases, SBA resulted in scores superior to EQA. The breast case had the strongest dependence on beam geometry, for which only the 7-beam EQA geometry had a score better than the two tangential beams, whereas all SBA geometries with more than two beams were superior. In the lung case, EQA and SBA scores monotonically improved with increasing number of beams; however, SBA required fewer beams to achieve scores equivalent to EQA. For the brain case, SBA with a coplanar pool was equivalent to EQA, while the noncoplanar pool resulted in slightly better scores; however, the dose-volume histograms demonstrated that the differences were not clinically significant. Conclusions: For situations in which beam geometry has a significant effect on the objective function, SBA can identify arrangements equivalent to equiangular geometries but using fewer beams. Furthermore, SBA provides the value of the objective function as the number of beams is increased, allowing the planner to select the minimal beam number that achieves the clinical goals. The method is simple to implement and could readily be incorporated into an existing optimization system.

  18. Property:FieldProcedures | Open Energy Information

    Open Energy Info (EERE)

    within the dataset. For additional information on the gravity survey, refer to Ground Gravity Survey. P Pressure Temperature Log + After a well has been drilled and...

  19. U.S. Energy Information Administration

    U.S. Energy Information Administration (EIA) Indexed Site

    capacity and net electricity generation from nuclear power. ... Information Administration (EIA) an additional 11 gigawatts (GW) of wind projects with expected completion dates in 2015...

  20. Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Info Visitor Information NERSC is located in Shyh Wang Hall-also known as the computational research and theory (CRT) building (Bldg. 59)-on the campus of Lawrence Berkeley...

  1. Project Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Project Information Slider award map The REE Program funds projects focused on developing economically feasible and environmentally benign technologies for recovering REEs from coal and/or coal by-products. Project Information The listed projects represent the current REE program portfolio. Agreement Number Project Title Performer Name FWP-ORD REE FY2016-2020 Rare Earth Elements (REE) from Coal and Coal By-Products National Energy Technology Laboratory

  2. Fire Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Resources ¬Ľ Emergency Communication ¬Ľ Fire Information Fire Information Focusing on fire prevention and protection. Contact Fire Management Officer Manuel J. L'Esperance Emergency Management (505) 667-6211 Email Wildfire Precautions Tips for Dry Conditions Never flick cigarette butts outdoors under any circumstances. If you smoke in your vehicle, use the ashtray. Keep vehicles off dry grass to prevent accidental fires caused by exhaust systems or catalytic converters on vehicles other

  3. Information Repository

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Repository Index Permit Renewal Application (Parts A and B) Submissions, September 2009, Department of Energy CBFO/Washington TRU Solutions Administrative Completeness Determination of the Amended Permit Renewal Application WIPP Hazardous Waste Facility Permit, JP Bearzi, NMED dated, November 25, 2009 Hazardous Waste Facility Permit effective January 2016 New Mexico Environment Department as modified by the Permittees on February 18, 2016 2016 Information Repository Documents 2015

  4. Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Info Visitor Information NERSC is located in Shyh Wang Hall-also known as the computational research and theory (CRT) building (Bldg. 59)-on the campus of Lawrence Berkeley National Laboratory in Berkeley, California. You can find information about visiting the lab, including an interactive campus map, transportation and lodging suggestions at http://www.lbl.gov/visit/. Your host must arrange site access prior to your visit. Last edited: 2016-01-06 16:48:46

  5. Information Sciences

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Information Sciences Uncovering actionable knowledge and generating insight into exascale datasets from heterogeneous sources in real time Leadership Group Leader Patrick M. Kelly Email Deputy Group Leader Amy Larson Email Contact Us Administrator Yvonne McKelvey Email Conceptual illustration of futuristic data stream processing. Developing methods and tools for understanding complex interactions and extracting actionable information from massive data streams. Basic and applied research

  6. Information Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-06-20

    The protection and control of classified information is critical to our nationís security. This Order establishes requirements and responsibilities for Department of Energy (DOE) Departmental Elements, including the National Nuclear Security Administration (NNSA), to protect and control classified information as required by statutes, regulation, Executive Orders, government-wide policy directives and guidelines, and DOE policy and directives. Cancels DOE M 470.4-4A Chg except for Section D.

  7. Printability of alloys for additive manufacturing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

    2016-01-22

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is usedmore¬†¬Ľ to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. Here, the findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.¬ę¬†less

  8. Local Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mo for a furnished apartment). Much of the housing in Los Alamos was built in the 1940's and 50's so expect older rental accommodations. Look early Additionally,...

  9. Jefferson Lab Information Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Search Online Catalog Subject Pathfinders Databases E-Books Online Journals Print Journals/Backfiles Ask a Librarian Interlibrary Loan Request Additional Resources Library Information Location and Hours Staff Circulation Policy Lab Libraries Give us your Feedback AVS Historical Book Collection Whats New ! Mobile Catalog Access Cryocooler fundamentals and space applications course notes AIP Digital Archives Applied Physics Letters Journal of Applied Physics Review of Scientific

  10. Structure Property Studies for Additively Manufactured Parts

    SciTech Connect (OSTI)

    Milenski, Helen M; Schmalzer, Andrew Michael; Kelly, Daniel

    2015-08-17

    Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

  11. Additional EIPC Study Analysis. Final Report

    SciTech Connect (OSTI)

    Hadley, Stanton W; Gotham, Douglas J.; Luciani, Ralph L.

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  12. Hotel Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hotel Information Hotel Information Los Alamos National Laboratory is situated on a mesatop on the eastern side of the Jemez Mountains, an impressive series of ancient volcanoes with extensive views of the Sangre de Cristo Mountains in the east, where sunsets turn the western slopes a vibrant red. We hope you enjoy your stay in the Land of Enchantment. Contacts Mike Rogers (505) 665-2513 Email Chandra Savage Marsden (505) 664-0183 Email Lodging A block of rooms has been reserved under the name

  13. Information Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-06-20

    The protection and control of classified information is critical to our nationís security. This Order establishes requirements and responsibilities for Department of Energy (DOE) Departmental Elements, including the National Nuclear Security Administration (NNSA), to protect and control classified information as required by statutes, regulation, Executive Orders, government-wide policy directives and guidelines, and DOE policy and directives. Cancels DOE M 470.4-4A Chg except for Section D. Admin Chg 1, dated 11-23-2012, cancels DOE O 471.6. Canceled by Admin Chg 2 dated 5-15-15.

  14. International Trade of Wood Pellets (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-05-01

    The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

  15. Microsoft Word - Exit Brochure.doc

    Broader source: Energy.gov (indexed) [DOE]

    on a permanent basis or for an extended period of time for military, medical, or disability leave. Federal Records As defined by law, Federal records are documentary...

  16. Comparison of Hydrogen and Propane Fuels (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    Factsheet comparing the chemical, physical, and thermal properties of hydrogen and propane, designed to facilitate an understanding of the differences and similarites of the two fuels.

  17. Comparison of Hydrogen and Propane Fuels (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-10-01

    Factsheet comparing the chemical, physical, and thermal properties of hydrogen and propane, designed to facilitate an understanding of the differences and similarites of the two fuels

  18. 508 Compliant Version - TEPP Planning Brochure

    Office of Environmental Management (EM)

    Planning Tools In 1989, the Department of Energy created the Office of Environmental Management (EM) to mitigate the risks and hazards posed by the legacy of nuclear weapons production and research. The most ambitious and far ranging of these missions is dealing with the environmental legacy of the Cold War. Many problems posed by its operations are unique, and include the transportation of unprecedented amounts of contaminated waste, water, and soil, and a vast number of contaminated structures

  19. 508 Compliant Version - TEPP Training Brochure

    Office of Environmental Management (EM)

    Training for a Radiological Transportation Emergency CECBEMS Accreditation The MERRTT program has been approved by the Continuing Education Coordinating Board of Emergency Medical Services for Continuing Education Hours (CEH). CEHs are awarded for each module completed and for the Practical Exercises. MERRTT Instructor Patch The TEPP instructor patches are designed for personnel who are qualified as MERRTT instructors. To receive a patch, instructors must attend a MERRTT Train-the-Trainer. When

  20. iso-brochure-6-29-outside

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    O u r C a p a b i l i t i e s I s o t o p e s f o r N u c l e a r M e d i c i n e I s o t o p e s f o r F u n d a m e n t a l S c i e n c e W e s a v e l i v e s * L A N L i s a m...

  1. Brochure: Federal Columbia River Power System (FCRPS)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    these agencies maximize the use of the Columbia River by generating power, protecting fish and wildlife, controlling floods, providing irrigation and navigation, and sustaining...

  2. International Trade of Biofuels (Brochure), Energy Analysis,...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and trade of biofuels have increased to meet global demand for renewable fuels. Ethanol and biodiesel contribute much of this trade because they are the most established...

  3. Microsoft Word - EFRC brochure.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gas Separations Relevant to Clean Energy Technologies Director Berend Smit Jeffrey Long (Deputy) Lead Institution University of California, Berkeley Partner Institutions Lawrence Berkeley National Laboratory Texas A&M University University of California, Davis University of Minnesota National Energy Technology Laboratory Principal Investigators Laura Gagliardi, Giulia Galli, Maciej Haranczyk, Brett Helms, Jeffrey Kortright, Jeffrey Long, David Luebke, Jeff Neaton, Wendy Queen, Jeffrey

  4. TEPP Planning Brochure | Department of Energy

    Office of Environmental Management (EM)

    spent nuclear fuel; low-specific activity material; transuranic waste; soil moisturedensity gauge; radiopharmaceuticals; and a radiography device. Each scenario provides basic...

  5. DOE-LPO-Brochure-CSP-2015

    Energy Savers [EERE]

    team of financial, technical, environmental, and legal professionals is dedicated to advancing an all-of-the-above energy strategy that avoids, reduces, or sequesters greenhouse gases. energy.gov/lpo THE DEPARTMENT OF ENERGY'S LOAN PROGRAMS OFFICE (LPO) INVESTS IN THE POWER OF AMERICAN INNOVATION energy.gov/lpo LPO investments accelerate the deployment of innovative clean energy projects and advanced vehicle manufacturing facilities across the United States. INVESTING in AMERICAN ENERGY LOAN

  6. ORISE Resources: Cytogenetic Biodosimetry Laboratory Brochure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is used to identify damage to chromosomes in individuals who have been exposed to ionizing radiation. Oak Ridge Institute for Science and Education (ORISE) researchers at...

  7. HCEI Road Map: 2011 Edition (Brochure)

    Broader source: Energy.gov [DOE]

    This road map outlines the 2011 key goals and strategies of the Hawaii Clean Energy Initiative, was founded based on a Memorandum of Understanding between the State of Hawaii and the U.S. Department of Energy in 2008.

  8. iso-brochure-6-29-outside

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    O u r C a p a b i l i t i e s I s o t o p e s f o r N u c l e a r M e d i c i n e I s o t o p e s f o r F u n d a m e n t a l S c i e n c e W e s a v e l i v e s * L A N L i s a m a j o r d o m e s t i c s u p p l i e r o f t h e i m p o r t a n t d i a g n o s t i c i s o t o p e s S r - 8 2 a n d G e - 6 8 a n d i s r e s e a r c h i n g m e t h o d s t o i n c r e a s e s u p p l y t o m e e t t h e n e e d s o f t h e m e d i c a l c o m m u n i t y . * T h e I s o t o p e P r o g r a m i s

  9. Planning Brings Vision Into Focus (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01

    This case study/fact sheet highlights the strategic energy planning process for Tribes that was developed by the DOE Office of Indian Energy. This nine-step process, which is outlined in one of the foundational education courses offered by the Office, enables Tribes to pursue energy projects in a well-planned and strategic manner.

  10. Smith Newton Vehicle Performance Evaluation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-08-01

    The Fleet Test and Evaluation Team at the U.S. Department of Energy's National Renewable Energy Laboratory is evaluating and documenting the performance of electric and plug-in hybrid electric drive systems in medium-duty trucks across the nation. Through this project, Smith Electric Vehicles will build and deploy 500 all-electric medium-duty trucks. The trucks will be deployed in diverse climates across the country.

  11. Smith Newton Vehicle Performance Evaluation - Cumulative (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-08-01

    The Fleet Test and Evaluation Team at the U.S. Department of Energy's National Renewable Energy Laboratory is evaluating and documenting the performance of electric and plug-in hybrid electric drive systems in medium-duty trucks across the nation. U.S. companies participating in this evaluation project received funding from the American Recovery and Reinvestment Act to cover part of the cost of purchasing these vehicles. Through this project, Smith Electric Vehicles is building and deploying 500 all-electric medium-duty trucks that will be deployed by a variety of companies in diverse climates across the country.

  12. Microsoft Word - EFRC brochure v2.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sue Postdoc LBNL Northwestern University Lang Sui Postdoc NETL Engr., Hyundai-Kia America Tech Ctr. Joseph Swisher Ph.D. UCB Project Engineer EPRI Mitsuhara Suzuki Postdoc LBNL...

  13. NSIDC Data Center: Energy Reduction Strategies (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-05-01

    The Green Data Center Project was a successful effort to significantly reduce the energy use of the National Snow and Ice Data Center (NSIDC) and this paper describes this project.

  14. iso-brochure-6-29-outside

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Our Capabilities Isotopes for Nuclear Medicine Isotopes for Fundamental Science We save lives * LANL is a major domestic supplier of the important diagnostic isotopes Sr-82 and Ge-68 and is researching methods to increase supply to meet the needs of the medical community. * The Isotope Program is actively researching the production of isotopes for therapeutic applications, including promising alpha-emitting radionuclides for targeted radiotherapy such as Ac-225. IPF integrates with researchers

  15. ESIF 2014 (Energy Systems Integration Facility) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-01-01

    This report covers research highlights and achievements for the Energy Systems Integration Facility in 2014.

  16. EPAct Alternative Fuel Transportation Program (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-06-01

    This annual report summarizes the compliance results of state and alternative fuel provider fleets covered by the Energy Policy Act of 1992 (EPAct) for model year 2012/fiscal year 2013.

  17. Inverse Design Summer School brochure, Sept 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Denver Marriott West * 1717 Denver West Blvd. * Golden, CO 80401 1-888-238-1803 (toll-free) * 303-279-9100 (local) Inverse Design Summer School September 13-14, 2011 The Center for Inverse Design-an Energy Frontier Research Center of the U.S. Department of Energy- is offering a no-cost, two-day summer school on inverse design. We invite you to attend if you are a: * Scientist or engineer interested in materials design and discovery * Technical leader in materials, electronics, or chemical

  18. NREL Algal Biofuels Projects and Partnerships (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-09-01

    The highlights presented here should serve as a foundation for the research efforts towards algae as a source of fuels and other chemicals.

  19. 508 Compliant Version- TEPP Training Brochure

    Broader source: Energy.gov [DOE]

    The Transportation Emergency Preparedness Program (TEPP) developed the Modular Emergency Response Radiological Transportation Training (MERRTT) to address concerns from States, Tribes, and local...

  20. 508 Compliant Version- TEPP Planning Brochure

    Broader source: Energy.gov [DOE]

    This model assists state, tribal, or local officials in determining emergency responder readiness. Implementation is through a self-assessment and involves answering questions about radioactive...

  1. Microsoft Word - 2015EFRCPIMeetingBrochure_Final

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center for Gas Separations Relevant to Clean Energy Technologies Director Jeffrey Long Berend ... Nuclear magnetic resonance (NMR) spectra, relaxation times, and self-diffusivities are ...

  2. Guidelines for Home Energy Professionals Project (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01

    The Guidelines for Home Energy Professionals is a collaboration between the U.S. Department of Energy (DOE) and a wide range of home energy performance industry professionals. The Guidelines project, managed by the National Renewable Energy Laboratory (NREL) for DOE, addresses the need for a highly-skilled weatherization workforce equipped to complete consistent, high-quality home energy upgrades for single-family homes, multifamily homes, and manufactured housing. In doing so, it helps increase energy efficiency in housing, which can mitigate climate change, one of the major challenges of the 21st century.

  3. Transportation Deployment (Brochure), NREL (National Renewable...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ers, and government agencies all turn to the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) to help put more green vehicles on the road. ...

  4. Electric-Drive Vehicle Basics (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-04-01

    Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

  5. Procurement Integrity Brochure What is Procurement Integrity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... supervisor and your agency ethics official, and * Either ... or the chief of a financial or technical evaluation team. ... years are talking about their work assignments over lunch. ...

  6. HCEI Road Map: 2011 Edition (Brochure)

    SciTech Connect (OSTI)

    Braccio, R.; Finch, P.

    2011-08-01

    This road map outlines the 2011 key goals and strategies of the Hawaii Clean Energy Initiative, was founded based on a Memorandum of Understanding between the State of Hawaii and the U.S. Department of Energy in 2008.

  7. HCEI Road Map: 2011 Edition (Brochure)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... in integrated bio-refinery capabilities would allow ... The second five year block, from 2016-2020, outlines the ...cleanenergyinitiative.orgreports.html, last accessed 101...

  8. Low-Energy Parking Structure Design (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-01-01

    This guide provides design teams with best practices for parking structure energy efficiency in the form of goals for each design aspect that affects energy use.

  9. 8.5x11 ARM Brochure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Atmospheric Radiation Measurement Program Atmospheric Radiation Measurement Program Atmospheric Radiation Measurement Program Atmospheric Radiation Measurement Program Atmospheric ...

  10. Develop and Evaluate Materials and Additives that Enhance Thermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Develop & evaluate materials & additives that enhance thermal & overcharge abuse Develop & Evaluate Materials & Additives that Enhance Thermal & ...

  11. Develop and Evaluate Materials and Additives that Enhance Thermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Develop & Evaluate Materials & Additives that Enhance Thermal & Overcharge Abuse Develop & Evaluate Materials & Additives that Enhance Thermal & Overcharge Abuse High Voltage ...

  12. WIPP Stakeholder Information Page

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WIPP Stakeholder Information Index 2016 WIPP Stakeholder Information Documents 2015 WIPP Stakeholder Information Documents 2014 WIPP Stakeholder Information Documents 2013 WIPP Stakeholder Information Documents 2012 WIPP Stakeholder Information Documents 2011 WIPP Stakeholder Information Documents 2010 WIPP Stakeholder Information Documents 2009 WIPP Stakeholder Information Documents 2008 WIPP Stakeholder Information Documents 2007 WIPP Stakeholder Information Documents 2006 WIPP Stakeholder

  13. Chemical Shuttle Additives in Lithium Ion Batteries

    SciTech Connect (OSTI)

    Patterson, Mary

    2013-03-31

    The goals of this program were to discover and implement a redox shuttle that is compatible with large format lithium ion cells utilizing LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} (NMC) cathode material and to understand the mechanism of redox shuttle action. Many redox shuttles, both commercially available and experimental, were tested and much fundamental information regarding the mechanism of redox shuttle action was discovered. In particular, studies surrounding the mechanism of the reduction of the oxidized redox shuttle at the carbon anode surface were particularly revealing. The initial redox shuttle candidate, namely 2-(pentafluorophenyl)-tetrafluoro-1,3,2-benzodioxaborole (BDB) supplied by Argonne National Laboratory (ANL, Lemont, Illinois), did not effectively protect cells containing NMC cathodes from overcharge. The ANL-RS2 redox shuttle molecule, namely 1,4-bis(2-methoxyethoxy)-2,5-di-tert-butyl-benzene, which is a derivative of the commercially successful redox shuttle 2,5-di-tert-butyl-1,4-dimethoxybenzene (DDB, 3M, St. Paul, Minnesota), is an effective redox shuttle for cells employing LiFePO{sub 4} (LFP) cathode material. The main advantage of ANL-RS2 over DDB is its larger solubility in electrolyte; however, ANL-RS2 is not as stable as DDB. This shuttle also may be effectively used to rebalance cells in strings that utilize LFP cathodes. The shuttle is compatible with both LTO and graphite anode materials although the cell with graphite degrades faster than the cell with LTO, possibly because of a reaction with the SEI layer. The degradation products of redox shuttle ANL-RS2 were positively identified. Commercially available redox shuttles Li{sub 2}B{sub 12}F{sub 12} (Air Products, Allentown, Pennsylvania and Showa Denko, Japan) and DDB were evaluated and were found to be stable and effective redox shuttles at low C-rates. The Li{sub 2}B{sub 12}F{sub 12} is suitable for lithium ion cells utilizing a high voltage cathode (potential that is higher than NMC) and the DDB is useful for lithium ion cells with LFP cathodes (potential that is lower than NMC). A 4.5 V class redox shuttle provided by Argonne National Laboratory was evaluated which provides a few cycles of overcharge protection for lithium ion cells containing NMC cathodes but it is not stable enough for consideration. Thus, a redox shuttle with an appropriate redox potential and sufficient chemical and electrochemical stability for commercial use in larger format lithium ion cells with NMC cathodes was not found. Molecular imprinting of the redox shuttle molecule during solid electrolyte interphase (SEI) layer formation likely contributes to the successful reduction of oxidized redox shuttle species at carbon anodes. This helps to understand how a carbon anode covered with an SEI layer, that is supposed to be electrically insulating, can reduce the oxidized form of a redox shuttle.

  14. Information Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-06-29

    This Order establishes requirements and responsibilities for Department of Energy (DOE) Departmental Elements, including the National Nuclear Security Administration (NNSA), to protect and control classified information as required by statutes, regulation, Executive Orders, government-wide policy directives and guidelines, and DOE policy and directives. (The original DOE O 471.6 canceled DOE M 470.4-4A, except for Section D). Admin Chg 2, dated 5-15-15, supersedes Admin Chg 1. Certified 5-21-2015.

  15. Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Information Visiting the Transportation Research and Analysis Computing Center For guests who wish to visit and meet with the technical staff, please contact the TRACC service desk or the Technical Point of Contact assigned to you for registration, scheduling, and confirmation, including Foreign Visits and Assignments. Registration with your host is required for entry into the TRACC facilities. A photo I.D., such as a driver's license or passport, is also required for facility access. If

  16. Information Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-06-29

    Establishes security requirements for the protection and control of information and matter required to be classified or controlled by statutes, regulations, or Department of Energy directives. Section E, Technical Surveillance Countermeasures Program, is Official Use Only. Please contact the DOE Office of Health, Safety and Security at 301-903-0292 if your official duties require you to have access to this part of the directive. Cancels: DOE M 471.2-1B, DOE M 471.2-1C, DOE M 471.2-4, and DOE O 471.2A

  17. Information Security

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-08-26

    This Manual establishes security requirements for the protection and control of information and matter required to be classified or controlled by statutes, regulations, or Department of Energy directives. Attachment E, Technical Surveillance Countermeasures Program, is for Official Use Only. Contact the Office of Security and Safety Performance Assurance at 301-903-3653 if your official duties require you to have access to this part of the directive. Cancels: DOE M 471.2-1B, DOE M 471.2-1C, DOE M 471.2-4, and DOE O 471.2A.

  18. Historical. Information.

    Office of Legacy Management (LM)

    Historical. Information. ~ H.. 1 . General Project Rulison Manager' s Report, April. 1973 DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. PROJECT RULISON MANAGER'S R E P O R T APRIL 197.3 UNITED STATES ATOMIC ENERGY COMMISSION NEVADA OPERATIONS OFFICE Las Vegas, Nevada PREFACE , The R u l i s o n ' p r o j e c t , d e t o n a t e d September 1 0 , 1969, 'was t h e second n u c l e a r . d e t o n a

  19. Geneial Information

    Office of Legacy Management (LM)

    --- _____ ii3 ' 6 f Geneial Information su-u+./ I The Commission maintains a residue storage area known as the Airport Site at Robertson, l Missouri. This site is located immediately north of the St. Louis Municipal Airport and east of the McIknnell Aircraft Corporation Plant on Rr~wn Road in St. Louis County. Consent to use and occupy the 21.7 acre tract was obtalned by the Manhattan Dlstrlot on Marsh 2, 19&6. T!ltle uas auqubed to the property on Janwry 3, 1947 by condemnation proceeding8

  20. Header Information

    National Nuclear Security Administration (NNSA)

    NRC 741 Crosswalk to SAMS 741 Field Number 741 Field Name SAMS 8.0 Field Header Information 1 Shipper's RIS ShipperRIS 2 Receiver's RIS ReceiverRIS 3 Transaction No. TransferNumber 4 Correction No. CorrectionNumber 5a Processing Code - Shipper * not entered 5b Processing Code - Receiver * not entered 6a Action Code - Shipper ActionCode 6b Action Code - Receiver ActionCode 8a Name and Address of Shipper * not entered 9a Name and Address of Receiver * not entered 10 No. of Data Lines NumberofLines

  1. DOE Seeks Additional Input on Next Generation Nuclear Plant | Department of

    Energy Savers [EERE]

    Energy Additional Input on Next Generation Nuclear Plant DOE Seeks Additional Input on Next Generation Nuclear Plant April 17, 2008 - 10:49am Addthis WASHINGTON, DC -The U.S. Department of Energy (DOE) today announced it is seeking public and industry input on how to best achieve the goals and meet the requirements for the Next Generation Nuclear Plant (NGNP) demonstration project work at DOE's Idaho National Laboratory. DOE today issued a Request for Information and Expressions of Interest

  2. The Role of Additive in Diketopyrrolopyrrole-based Small Molecular...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: The Role of Additive in Diketopyrrolopyrrole-based Small Molecular Bulk Heterojunction Solar Cells Citation Details In-Document Search Title: The Role of Additive ...

  3. Large-Scale Manufacturing of Nanoparticle-Based Lubrication Additives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Large-Scale Manufacturing of Nanoparticle-Based Lubrication Additives Large-Scale Manufacturing of Nanoparticle-Based Lubrication Additives PDF icon nanoparticulate-basedlubricati...

  4. Novel electrolytes and electrolyte additives for PHEV applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    electrolytes and electrolyte additives for PHEV applications Novel electrolytes and electrolyte additives for PHEV applications 2009 DOE Hydrogen Program and Vehicle Technologies ...

  5. Ionic Liquids as Multifunctional Ashless Additives for Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multifunctional Ashless Additives for Engine Lubrication Ionic Liquids as Multifunctional Ashless Additives for Engine Lubrication A group of oil-miscible ionic liquids has been ...

  6. An Overview of Polymer Additive Manufacturing Technologies Peterson...

    Office of Scientific and Technical Information (OSTI)

    of Polymer Additive Manufacturing Technologies Peterson, Dominic S. Los Alamos National Laboratory Los Alamos National Laboratory Materials Science(36) Additive Manufacturing...

  7. Characteristics and Effects of Lubricant Additive Chemistry and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additive Chemistry and Exhaust Conditions on Diesel Particulate Filter Service Life and Vehicle Fuel Economy Characteristics and Effects of Lubricant Additive Chemistry and ...

  8. Unlocking the Potential of Additive Manufacturing in the Fuel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Download presentation...

  9. Additives and Cathode Materials for High-Energy Lithium Sulfur...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additives and Cathode Materials for High-Energy Lithium Sulfur Batteries Additives and Cathode Materials for High-Energy Lithium Sulfur Batteries 2013 DOE Hydrogen and Fuel Cells...

  10. Utility of Big Area Additive Manufacturing (BAAM) For The Rapid...

    Office of Scientific and Technical Information (OSTI)

    Utility of Big Area Additive Manufacturing (BAAM) For The Rapid Manufacture of Customized Electric Vehicles Citation Details In-Document Search Title: Utility of Big Area Additive...

  11. Multi-component Nanoparticle Based Lubricant Additive to Improve...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nanoparticle Based Lubricant Additive to Improve Efficiency and Durability in Engines Multi-component Nanoparticle Based Lubricant Additive to Improve Efficiency and ...

  12. Feasibility and testing of lighweight, energy efficient, additive...

    Office of Scientific and Technical Information (OSTI)

    efficient, additive manufactured pneumatic control valve Citation Details In-Document Search Title: Feasibility and testing of lighweight, energy efficient, additive manufactured ...

  13. Unlocking the Potential of Additive Manufacturing in the Fuel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Download presentation ...

  14. Fuel Additive Strategies for Enhancing the Performance of Engines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additive Strategies for Enhancing the Performance of Engines and Engine Oils Fuel Additive Strategies for Enhancing the Performance of Engines and Engine Oils 2003 DEER Conference ...

  15. Controlled Experiments on the Effects of Lubricant/Additive ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Experiments on the Effects of LubricantAdditive (Low-Ash, Ashless) Characteristics on DPF Degradation Controlled Experiments on the Effects of LubricantAdditive (Low-Ash, ...

  16. An Overview of Polymer Additive Manufacturing Technologies (Technical...

    Office of Scientific and Technical Information (OSTI)

    An Overview of Polymer Additive Manufacturing Technologies Citation Details In-Document Search Title: An Overview of Polymer Additive Manufacturing Technologies You are ...

  17. Additive Manufacturing for Ceramics (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Additive Manufacturing for Ceramics Citation Details In-Document Search Title: Additive Manufacturing for Ceramics You are accessing a document from the Department of Energy's ...

  18. Department of Energy Announces Two Additional Loans of Oil from...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additional Loans of Oil from the Strategic Petroleum Reserve Department of Energy Announces Two Additional Loans of Oil from the Strategic Petroleum Reserve September 2, 2005 - ...

  19. Additional Storage Contracts Awarded for Northeast Home Heating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additional Storage Contracts Awarded for Northeast Home Heating Oil Reserve Additional Storage Contracts Awarded for Northeast Home Heating Oil Reserve September 30, 2011 - 1:00pm ...

  20. Recommendation 222: Recommendations on Additional Off-site Groundwater...

    Office of Environmental Management (EM)

    2: Recommendations on Additional Off-site Groundwater Migration Studies Recommendation 222: Recommendations on Additional Off-site Groundwater Migration Studies ORSSAB recommends...

  1. Additional capacities seen in metal oxide lithium-ion battery...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Additional capacities seen in metal oxide lithium-ion battery electrodes Citation Details In-Document Search Title: Additional ...

  2. The Role of Lubricant Additives in Fuel Efficiency and Emission...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lubricant Additives in Fuel Efficiency and Emission Reductions: Viscosity Effects The Role of Lubricant Additives in Fuel Efficiency and Emission Reductions: Viscosity Effects ...

  3. The Importance of Carbon Fiber to Polymer Additive Manufacturing...

    Office of Scientific and Technical Information (OSTI)

    The Importance of Carbon Fiber to Polymer Additive Manufacturing Citation Details In-Document Search Title: The Importance of Carbon Fiber to Polymer Additive Manufacturing...

  4. Wind energy information guide

    SciTech Connect (OSTI)

    1996-04-01

    This book is divided into nine chapters. Chapters 1--8 provide background and annotated references on wind energy research, development, and commercialization. Chapter 9 lists additional sources of printed information and relevant organizations. Four indices provide alphabetical access to authors, organizations, computer models and design tools, and subjects. A list of abbreviations and acronyms is also included. Chapter topics include: introduction; economics of using wind energy; wind energy resources; wind turbine design, development, and testing; applications; environmental issues of wind power; institutional issues; and wind energy systems development.

  5. INFORMAL REPORT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    q?% LA-5031 -MS INFORMAL REPORT krs $ 1 0 s N o t e on Inverse Bremsstrahlung in Strong E!ect:omGgnetic c;alPl I j a l a m o s scientific laboratory of the University of California LOS A L A M O S , NEW MEXICO 8 7 5 4 4 U N I T E D S T A T E S A T O M I C E N E R G Y C O M M I S S I O N a This report was prepared as an account of work sponsored by the United States Government. Neither the United States nor the United States Atomic Energy Commission, nor any of their employees, nor any of their

  6. Connect with SC | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Connect with SC About About Home Organization Budget Field Offices Federal Advisory Committees History Scientific and Technical Information Honors & Awards Jobs Brochures, Logos, & Information Resources Brochures Fact Sheets SC Logos Newsletters Connect with SC Contact Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 Brochures, Logos, & Information Resources Connect with SC Print Text Size: A A A

  7. Texas Liquefied Natural Gas Additions to and Withdrawals from Storage

    U.S. Energy Information Administration (EIA) Indexed Site

    2012 2013 2014 View History Net Withdrawals 0 2013-2013 Additions 0 * 0 2012

  8. Biomass 2014: Additional Speaker Biographies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Additional Speaker Biographies Biomass 2014: Additional Speaker Biographies This document outlines the biographies of the additional speakers for Biomass 2014, held July 29-July 30 in Washington, D.C. PDF icon additional_speaker_biographies_biomass_2014 More Documents & Publications Bioenergy 2015 Speaker Biographies Demonstration and Deployment Workshop - Day 2 Sustainable Solutions to Global Energy Challenges

  9. Photovoltaic Geographical Information System | Open Energy Information

    Open Energy Info (EERE)

    Information System Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Photovoltaic Geographical Information System Focus Area: Renewable Energy Topics: Opportunity...

  10. AUDIT REPORT The Energy Information Administration's Information...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Information Administration's Information Technology Program DOE-OIG-16-04 November 2015 U.S. Department of ... plants, and proposed electricity generators were not part of ...

  11. Additional Requirements and Guidance for Digital Data Management...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Commercialization Assistance Other Resources Awards SBIRSTTR Highlights Reporting Fraud Contact Information Small Business Innovation Research and Small Business Technology...

  12. Upcoming Webinar February 11: Additive Manufacturing for Fuel Cells

    Broader source: Energy.gov [DOE]

    On Tuesday, February 11, the Energy Department will present a live webinar on additive manufacturing to stimulate discussion in the hydrogen and fuel cell community on the application of additive manufacturing to prototyping and production.

  13. Neutron Characterization of Additively Manufactured Components. Workshop Report

    SciTech Connect (OSTI)

    Watkins, Thomas R.; Payzant, E. Andrew; Babu, Sudarsanam Suresh

    2015-09-01

    Additive manufacturing (AM) is a collection of promising manufacturing methods that industry is beginning to explore and adopt. Macroscopically complicated and near net shape components are being built using AM, but how the material behaves in service is a big question for industry. Consequently, AM components/materials need further research into exactly what is made and how it will behave in service. This one and a half day workshop included a series of invited presentations from academia, industry and national laboratories (see Appendix A for the workshop agenda and list of talks). The workshop was welcomed by Alan Tennant, Chief Scientist, Neutron Sciences Directorate, ORNL, and opened remotely by Rob Ivestor, Deputy Director, Advanced Manufacturing Office-DOE, who declared AM adoptees as titans who will be able to create customized 3-D structures with 1 million to 1 billion micro welds with locally tailored microstructures. Further he stated that characterization with neutrons is key to be able to bring critical insight/information into the AM process/property/behavior relationship. Subsequently, the presentations spanned a slice of the current state of the art AM techniques and many of the most relevant characterization techniques using neutrons. After the talks, a panel discussion was held; workshop participants (see Appendix B for a list of attendees) providing questions and the panel answers. The main purpose of the panel discussion was to build consensus regarding the critical research needs in AM that can be addressed with neutrons. These needs were placed into three categories: modes of access for neutrons, new capabilities needed, new AM material issues and neutrons. Recommendations from the workshop were determined based on the panel discussion.

  14. Perfluoro Aryl Boronic Esters as Chemical Shuttle Additives | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Perfluoro Aryl Boronic Esters as Chemical Shuttle Additives Perfluoro Aryl Boronic Esters as Chemical Shuttle Additives 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon es107_hunt_2011_p.pdf More Documents & Publications Develop & Evaluate Materials & Additives that Enhance Thermal & Overcharge Abuse Develop & evaluate materials & additives that enhance thermal & overcharge abuse

  15. Ionic Liquids as Multifunctional Ashless Additives for Engine Lubrication |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Multifunctional Ashless Additives for Engine Lubrication Ionic Liquids as Multifunctional Ashless Additives for Engine Lubrication A group of oil-miscible ionic liquids has been developed by an ORNL-GM team as candidate lubricant additives with promising physical/chemical properties and potential multiple functionalities. PDF icon deer12_qu.pdf More Documents & Publications Ionic Liquids as Multi-Functional Lubricant Additives to Enhance Engine Efficiency Vehicle

  16. EIS-0386: Notice of Additional Public Hearing | Department of Energy

    Energy Savers [EERE]

    6: Notice of Additional Public Hearing EIS-0386: Notice of Additional Public Hearing Designation of Energy Corridors on Federal Land in the 11 Western States Additional Public Hearing on the Draft Programmatic Environmental Impact Statement; Designation of Energy Corridors on Federal Land in the 11 Western States PDF icon Additional Public Hearing on the Draft Programmatic Environmental Impact Statement; Designation of Energy Corridors on Federal Land in the 11 Western States, DOE/EIS-0386

  17. EERE Success Story - Novel Engine Lubrication Anti-Wear Additives

    Energy Savers [EERE]

    Demonstrate Improved Fuel Economy | Department of Energy Story - Novel Engine Lubrication Anti-Wear Additives Demonstrate Improved Fuel Economy EERE Success Story - Novel Engine Lubrication Anti-Wear Additives Demonstrate Improved Fuel Economy March 14, 2016 - 1:27pm Addthis EERE Success Story - Novel Engine Lubrication Anti-Wear Additives Demonstrate Improved Fuel Economy EERE Success Story - Novel Engine Lubrication Anti-Wear Additives Demonstrate Improved Fuel Economy EERE Success Story -

  18. Unlocking the Potential of Additive Manufacturing in the Fuel Cells

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry | Department of Energy Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Unlocking the Potential of Additive Manufacturing in the Fuel Cells Industry Download presentation slides from the DOE Fuel Cell Technologies Office webinar "Additive Manufacturing for Fuel Cells" held on February 11, 2014. PDF icon Additive Manufacturing for Fuel Cells Webinar Slides More Documents & Publications QTR Webinar: Chapter 8 - Industry and Manufacturing AMO

  19. Development of Advanced Electrolytes and Electrolyte Additives | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Electrolytes and Electrolyte Additives Development of Advanced Electrolytes and Electrolyte Additives 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. PDF icon es025_zhang_2010_o.pdf More Documents & Publications Progress in Electrolyte Component R&D within the ABR Program, 2009 thru 2013 Electrolytes - Advanced Electrolyte and Electrolyte Additives Advanced Electrolyte Additives for

  20. Vermont Environmental Notice Bulletin | Open Energy Information

    Open Energy Info (EERE)

    in the permit process, and the name, phone number, and e-mail address of a DEC contact person who can provide additional information. Of particular interest are the beginning and...