Sample records for brochure hydraulic institute

  1. Brochure Hydraulic Institute Standards Overview | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 RussianBy:WhetherNovember 13,National Renewable Energy Lab Scientist Ki Ye.If you

  2. IOWA INSTITUTE OF HYDRAULIC RESEARCH COLLEGE OF ENGINEERING

    E-Print Network [OSTI]

    Stanier, Charlie

    SUMMARY OF ACTIVITIES IOWA INSTITUTE OF HYDRAULIC RESEARCH COLLEGE OF ENGINEERING THE UNIVERSITY December 1999 This report of the activities of the Iowa Institute of Hydraulic Research (IIHR) covers increasing emphasis on field measurements in environmental hydraulics and hydrometeorology and on development

  3. The Hydraulic Institute: Who We Are

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon2001 PowerofUseResearchHydraulic Institute:

  4. Institute of Hydraulic Engineering Department of Hydrology and Geohydrology

    E-Print Network [OSTI]

    Cirpka, Olaf Arie

    Institute of Hydraulic Engineering Department of Hydrology and Geohydrology Prof. Dr. rer. nat. Dr Measurements with Hydrologic Data H. Kindt 1, J. Riegger 1, A. Bárdossy 1, B. Devaraju 2 and N. Sneeuw 2 henry pattern for which storage changes can be constrained within the limits of hydrological data uncertainty. 2

  5. ARM - Brochures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearchSOLICITATIONIMODI FICATION OFMaterialsAnnualProject (BBOP)MaterialsBrochures

  6. IOWA INSTITUTE OF HYDRAULIC RESEARCH COLLEGE OF ENGINEERING

    E-Print Network [OSTI]

    Stanier, Charlie

    * Hydraulic Model Study of Circulating Water Pump Structure for Marmara Erglisi Power Plant BVI Ettema Simulations with NEXRAD Data Army/UCONN Krajewski, Kruger Simulation of the Passage of a Blade Through ASCE Holly * ** Hydraulic Model Tests of the St. Louis County Water Company Meramec Plant Intakes No. 1

  7. The EM Story Brochure

    Broader source: Energy.gov [DOE]

    In 2012, the EM story brochure was released to the public that provided a high-level summary and communicated EM's history, cleanup, and challenges.

  8. Philadelphia, Pennsylvania: Solar in Action (Brochure), Solar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Philadelphia, Pennsylvania: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Philadelphia, Pennsylvania: Solar in Action (Brochure),...

  9. Solar Now! Residential Brochure | Department of Energy

    Energy Savers [EERE]

    Information Resources Solar Now Residential Brochure Solar Now Residential Brochure Four Oregon organizations have teamed up to help Oregon homeowners learn about and install...

  10. Utility Partnerships Program Overview (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01T23:59:59.000Z

    Program overview brochure for the Utility Partnerships Program within the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP).

  11. PYF_brochure-Partner.indd

    Broader source: Energy.gov (indexed) [DOE]

    Protect Your Family 2006 Microsoft Corporation. All rights reserved. The information contained in this brochure is provided for educational and informational purposes only....

  12. New American Home 2009 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This brochure details the New American Home 2009, which demonstrates the use of innovative building materials, cutting-edge design, and the latest construction techniques.

  13. Brochures | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced Materials FindAdvanced MaterialsDepartmentBrinkmankindBrochures

  14. Unique Perspectives on a Transforming Energy Economy: 2014 Annual Report (Brochure)

    SciTech Connect (OSTI)

    Gossett, S.

    2014-03-01T23:59:59.000Z

    What makes JISEA unique? Unique perspectives. This brochure highlights the unique perspectives provided by the Joint Institute for Strategic Energy Analysis through JISEA's recent accomplishments and the people behind them.

  15. Partnering with the NCPV (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01T23:59:59.000Z

    Brochure that explains the basic partnering opportunities that exist within the National Center for Photovoltaics for industry and university groups: non-proprietary partnering opportunities, competitive solicitations, Technology Partnership Agreements, seed fund to develop Technology Partnership Agreements, Hands-On PV Experience Workshop, and NCPV Fellowship Program.

  16. Portland, Oregon: Solar in Action (Brochure), Solar America Cities...

    Energy Savers [EERE]

    Portland, Oregon: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Portland, Oregon: Solar in Action (Brochure), Solar America Cities,...

  17. Hybrid and Plug-In Electric Vehicles (Brochure), Vehicle Technologies...

    Broader source: Energy.gov (indexed) [DOE]

    Hybrid and Plug-In Electric Vehicles (Brochure), Vehicle Technologies Program (VTP) Hybrid and Plug-In Electric Vehicles (Brochure), Vehicle Technologies Program (VTP) Describes...

  18. Ann Arbor, Michigan: Solar in Action (Brochure), Solar America...

    Broader source: Energy.gov (indexed) [DOE]

    Ann Arbor, Michigan: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Ann Arbor, Michigan: Solar in Action (Brochure), Solar America...

  19. Berkeley, California: Solar in Action (Brochure), Solar America...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Berkeley, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Berkeley, California: Solar in Action (Brochure), Solar America...

  20. Austin, Texas: Solar in Action (Brochure), Solar America Cities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Austin, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Austin, Texas: Solar in Action (Brochure), Solar America Cities, Energy...

  1. Knoxville, Tennessee: Solar in Action (Brochure), Solar America...

    Energy Savers [EERE]

    Knoxville, Tennessee: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Knoxville, Tennessee: Solar in Action (Brochure), Solar America...

  2. Seattle, Washington: Solar in Action (Brochure), Solar America...

    Broader source: Energy.gov (indexed) [DOE]

    Seattle, Washington: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE) Seattle, Washington: Solar in Action (Brochure), Solar America...

  3. Innovation Impact: Breakthrough Research Results (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-07-01T23:59:59.000Z

    The Innovation Impact brochure captures key breakthrough results across NREL's primary areas of renewable energy and energy efficiency research: solar, wind, bioenergy, transportation, buildings, analysis, and manufacturing technologies.

  4. Regional Resource Centers for Innovation Brochure (Revised)

    SciTech Connect (OSTI)

    Wogsland, J.

    2000-09-14T23:59:59.000Z

    This brochure describes OIT's Regional Resource Centers for Innovation (RCIs), which provide the Innovation and Invention program grantees and other small business energy innovators commercialization assistance.

  5. New American Home 2011, Orlando, Florida (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-12-01T23:59:59.000Z

    This brochure details the New American Home 2011, which demonstrates the use of innovative building materials, cutting-edge design, and the latest construction techniques.

  6. Securing America's Clean Energy Future (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-08-01T23:59:59.000Z

    This letter-fold brochure provides an overview of the activities and programs in DOE's Office of Energy Efficiency and Renewable Energy.

  7. Healthcare Energy Metering Guidance (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01T23:59:59.000Z

    This brochure is intended to help facility and energy managers plan and prioritize investments in energy metering. It offers healthcare-specific examples of metering applications, benefits, and steps that other health systems can reproduce. It reflects collaborative input from the U.S. Department of Energy national laboratories and the health system members of the DOE Hospital Energy Alliance's Benchmarking and Measurement Project Team.

  8. Assistance Focus: Africa (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-12-01T23:59:59.000Z

    The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to African governments, including the benefits of that assistance.

  9. Brochures | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWPSuccess Stories Siteand TechnicalBroad AgencyBrochures Advanced

  10. Homebuilder's Guide to Going Solar (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01T23:59:59.000Z

    This 8-page brochure describes the steps a builder would take to install solar electricity (photovoltaics or PV), solar water heating, or how to build a home solar ready.

  11. Advancing Efforts to Energize Native Alaska (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-04-01T23:59:59.000Z

    This brochure describes key programs and initiatives of the DOE Office of Indian Energy Policy and Programs to advance energy efficiency, renewable energy, and energy infrastructure projects in Alaska Native villages.

  12. Research Advances Cellulosic Ethanol, NREL Leads the Way (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2007-03-01T23:59:59.000Z

    This brochure highlights NREL's recent advances in cellulosic ethanol production. Research at NREL addresses both biochemical and thermochemical processes.

  13. Viscous Hydraulic Jumps Submitted by

    E-Print Network [OSTI]

    Bush, John W.M.

    Viscous Hydraulic Jumps Submitted by Jeffrey M. Aristoff, Jeffrey D. Leblanc, Annette E. Hosoi, and John W. M. Bush, Massachusetts Institute of Technology We examine the form of the viscous hydraulic of height 2­10 mm. Elegaard et al.1 first demonstrated that the axial symme- try of the viscous hydraulic

  14. Austin, Texas: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Austin, Texas, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  15. Knoxville, Tennessee: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Knoxville, TN, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  16. Berkeley, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Berkeley, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  17. Portland, Oregon: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Portland, OR, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  18. Seattle, Washington: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Seattle, WA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  19. Tucson, Arizona: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Tucson, AZ, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  20. Ann Arbor, Michigan: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Ann Arbor, Michigan, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  1. Santa Rosa, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Santa Rosa, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  2. Philadelphia, Pennsylvania: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Philadelphia, PA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  3. San Antonio, Texas: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of San Antonio, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  4. Pittsburgh, Pennsylvania: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Pittsburgh, PA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  5. San Jose, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of San Jose, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  6. Denver, Colorado: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Denver, Colorado, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  7. San Diego, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of San Diego, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  8. Houston, Texas: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Houston, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  9. Orlando, Florida: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Orlando, FL, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  10. Sacramento, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Sacramento, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  11. Milwaukee, Wisconsin: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Milwaukee, WI, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  12. Madison, Wisconsin: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Madison, WI, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  13. New Orleans, Louisiana: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of New Orleans, LA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  14. San Francisco, California: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of San Francisco, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  15. Regulation of Hydraulic Fracturing in California

    E-Print Network [OSTI]

    Kammen, Daniel M.

    APRIL 2013 Regulation of Hydraulic Fracturing in California: A WAsteWAteR And WAteR QuAlity Pe | Regulation of Hydraulic Fracturing in California Wheeler Institute for Water Law & Policy Center for Law #12;Regulation of Hydraulic Fracturing in California | 3Berkeley law | wheeler InstItute for water law

  16. Open PV Project: Unlocking PV Installation Data (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    This brochure summarizes the Open PV Project, a collaborative effort of government, industry, and the public to compile a comprehensive database of PV installations in the United States. The brochure outlines the purpose and history of the project as well as the main capabilities and benefits of the online Open PV tool. The brochure also introduces how features of the tool are used, and it describes the sources and characteristics of Open PV's data and data collection processes.

  17. Lead by Example with Smart Energy Management FEMP (Revised Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-07-01T23:59:59.000Z

    This brochure provides the primary audience of Federal facility and energy managers with an accurate understanding of the services and assistance available through FEMP.

  18. Rebuilding it Better: Greensburg, Kansas, Kiowa County Memorial Hospital (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-03-01T23:59:59.000Z

    This brochure details the sustainable and green aspects of the LEED Platinum-designed Kiowa County Memorial Hospital in Greensburg, Kansas.

  19. Rebuilding It Better: Greensburg, Kansas, City Hall (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01T23:59:59.000Z

    This brochure details the energy efficient and sustainable aspects of the LEED Platinum-designated City Hall building in Greensburg, Kansas.

  20. Rebuilding It Better: Greensburg, Kansas. City Hall (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This brochure details the energy efficient and sustainable aspects of the LEED Platinum-designated City Hall building in Greensburg, Kansas.

  1. Rebuilding It Better: City of Greensburg, Kansas, Business Incubator (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This brochure details the energy efficient and sustainable aspects of the LEED Platinum-designed SunChips Business Incubator in Greensburg, Kansas.

  2. Protect Your Family Brochure (Training and Awareness Material...

    Broader source: Energy.gov (indexed) [DOE]

    Training and Awareness Material for Cyber Security. How to protect your family. Protect Your Family Brochure (Training and Awareness Material) More Documents & Publications Front...

  3. Advanced Reactor Thermal Hydraulic Modeling | Argonne Leadership...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Reactor Thermal Hydraulic Modeling PI Name: Paul Fischer PI Email: fischer@mcs.anl.gov Institution: Argonne National Laboratory Allocation Program: INCITE Allocation Hours...

  4. Advanced Reactor Thermal Hydraulic Modeling | Argonne Leadership...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fischer (ANL), Aleks Obabko (ANL), and Hank Childs (LBNL) Advanced Reactor Thermal Hydraulic Modeling PI Name: Paul Fischer PI Email: fischer@mcs.anl.gov Institution: Argonne...

  5. ORISE Resources: Cytogenetic Biodosimetry Laboratory Brochure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project *1980-1981 U.S. OR I GI N A L SHowBrochure

  6. TEPP Training Brochure | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2Uranium Transferon the PassingRouting TEC WorkingTraining Brochure TEPP

  7. Hydraulic Fracturing (Vermont)

    Broader source: Energy.gov [DOE]

    Vermont prohibits hydraulic fracturing or the collection, storage, or treatment of wastewater from hydraulic fracturing

  8. Leading the Way to Energy Systems Research (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-05-01T23:59:59.000Z

    This brochure about NREL is a national version that can be distributed to visitors and any other interested parties. It provides general information about laboratory, its mission, and operations.

  9. Capturing the Sun, Creating a Clean Energy Future (Brochure)...

    Broader source: Energy.gov (indexed) [DOE]

    Capturing the Sun, Creating a Clean Energy Future (Brochure), SunShot, Solar Energy Technologies Program (SETP), U.S. Department of Energy (DOE) Capturing the Sun, Creating a Clean...

  10. Lead By Example with Smart Energy Management (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-07-01T23:59:59.000Z

    Brochure outlining the mission and activities of the Department of Energy's Federal Energy Management Program, which facilitates the Federal Government's implementation of sound, cost-effective energy management and investment practices to enhance the nation's energy security and environmental stewardship.

  11. National Renewable Energy Laboratory: 35 Years of Innovation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-11-01T23:59:59.000Z

    This brochure about NREL is a national version that can be distributed to visitors and any other interested parties. It provides general information about laboratory, its mission, and operations.

  12. Wind for Schools: A Wind Powering America Project (Brochure)

    SciTech Connect (OSTI)

    Baring-Gould, I.

    2009-08-01T23:59:59.000Z

    This brochure provides an overview of Wind Powering America's Wind for Schools Project, including a description of the project, the participants, funding sources, the basic configurations, and how interested parties can become involved.

  13. Wind for Schools: A Wind Powering America Project (Alaska) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-02-01T23:59:59.000Z

    This brochure provides an overview of Wind Powering America's Wind for Schools Project, including a description of the project, the participants, funding sources, the basic configurations, and how interested parties can become involved.

  14. Rebuilding It Better: Greensburg, Kansas, USD 422 Greensburg K-12 School (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-04-01T23:59:59.000Z

    This brochure details the energy efficient and sustainable aspects of the USD 422 K-12 school in Greensburg, Kansas.

  15. Initial submission or replacement of an Investigator's Brochure Page 1 of 2 (Version: January 25, 2012)

    E-Print Network [OSTI]

    Shoubridge, Eric

    Initial submission or replacement of an Investigator's Brochure Page 1 of 2 (Version: January 25 or Replacement of an Investigator's Brochure or Product Monograph This form replaces a letter of explanation from or replacement of an Investigator's Brochure Page 2 of 2 (Version: January 25, 2012) 5) List all forms

  16. What is Clean Cities? October 2011 (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    Brochure describes the Clean Cities program and includes the contact information for its 85 coalitions. Sponsored by the U.S. Department of Energy's (DOE) Vehicle Technologies Program (VTP), Clean Cities is a government-industry partnership that reduces petroleum consumption in the transportation sector. Clean Cities contributes to the energy, environmental, and economic security of the United States by supporting local decisions to reduce our dependence on imported petroleum. Established in 1993 in response to the Energy Policy Act (EPAct) of 1992, the partnership provides tools and resources for voluntary, community-centered programs to reduce consumption of petroleum-based fuels. In nearly 100 coalitions, government agencies and private companies voluntarily come together under the umbrella of Clean Cities. The partnership helps all parties identify mutual interests and meet the objectives of reducing the use of petroleum, developing regional economic opportunities, and improving air quality. Clean Cities deploys technologies and practices developed by VTP. These include idle-reduction equipment, electric-drive vehicles, fuel economy measures, and renewable and alternative fuels, such as natural gas, liquefied petroleum gas (propane), electricity, hydrogen, biofuels, and biogas. Idle-reduction equipment is targeted primarily to buses and heavy-duty trucks, which use more than 2 billion gallons of fuel every year in the United States while idling. Clean Cities fuel economy measures include public education on vehicle choice and fuel-efficient driving practices.

  17. Hydraulic Institute Mission and Vision:

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy ChinaofSchaefer To:Department ofOral Testimony ofMonitoring, Protection |

  18. THERMAL HYDRAULICS KEYWORDS: thermal hydraulics,

    E-Print Network [OSTI]

    Smith, Barton L.

    -fluid modeling of nuclear reactor systems. Thermal-hydraulic analysis codes such as RELAP5-3D ~Ref. 1! and FLICA regions of the system. In fact, the CFD code FLUENT has previously been coupled to RELAP5-3D ~Refs. 3

  19. Salt Lake City, Utah: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Salt Lake City, UT, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  20. Community Shared Solar: Policy and Regulatory Considerations (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01T23:59:59.000Z

    This brochure explores the ways in which the shared solar business model interacts with existing policy and regulations, including net metering, tax credits, and securities regulation. It presents some of the barriers that shared solar projects may face, and provides options for creating a supportive policy environment.

  1. Minneapolis and Saint Paul, Minnesota: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Minneapolis, MN, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  2. Greensburg, Kansas: A Better, Greener Place to Live (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-10-01T23:59:59.000Z

    This Brochure is for Greensburg city leadership (Chamber of Commerce, Mayor's Office, and others) to use to attract visitors and businesses to Greensburg, and to ensure the city?s commitment to sustainability. Content includes EERE subject matter and mentions DOE's role in rebuilding. The layout is designed to be used as a template for other cities in similar situations.

  3. New York City, New York: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of New York City, NY, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  4. Boston, Massachusetts: Solar in Action (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure provides an overview of the challenges and successes of Boston, MA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given. The City of Boston and its Solar America Cities program, Solar Boston, are helping to debunk the myth that solar energy is only feasible in the southern latitudes. Boston has some of the highest energy prices in the country and will likely be one of the first locations where solar power achieves grid parity with conventional energy technologies. Solar Boston is facilitating the rapid development of solar energy projects and infrastructure in the short-term, and is preparing for the rapid market growth that is expected with the imminent arrival of grid parity over the long-term. Solar Boston developed the strategy for achieving Mayor Menino's goal of installing 25 MW of solar energy throughout Boston by 2015. Through Solar Boston, the city has developed a strategy for the installation of solar technology throughout Boston, including mapping feasible locations, preparing a permitting guide, and planning the citywide bulk purchase, financing, and installation of solar technology. The city has also worked with local organizations to maximize Boston's participation in state incentive programs and innovative financing initiatives. The resulting accomplishments include the following: (1) Created an online map of current local renewable energy projects with a tool to allow building owners to calculate their rooftop solar potential. The map is currently live at http://gis.cityofboston.gov/solarboston/. (2) Supported the city's Green Affordable Housing Program (GAHP), in partnership with the Department of Neighborhood Development (DND). Under GAHP, the city is installing more than 150 kW of PV on 200 units of affordable housing. DND requires that all new city-funded affordable housing be LEED silver certified and built solar-ready. (3) Defined solar's role in emergency preparedness with the Boston Mayor's Office of Emergency Preparedness. (4) Worked with local organizations to maximize Boston's participation in state incentive programs and innovative financing mechanisms. Solar Boston partners include DOE, MTC, local utilities and unions, an anonymous foundation, and a broad range of local, regional, and national clean-energy stakeholders. Solar Boston kicked off its partner program on January 10, 2008, sponsoring a workshop on 'Thinking BIG about Boston's Solar Energy Future,' to discuss how state, utility, and municipal programs can work together. Presentations were given by Solar Boston, Keyspan/National Grid, NSTAR, and MTC.

  5. Hydraulic fracturing-1

    SciTech Connect (OSTI)

    Not Available

    1990-01-01T23:59:59.000Z

    This book contains papers on hydraulic fracturing. Topics covered include: An overview of recent advances in hydraulic fracturing technology; Containment of massive hydraulic fracture; and Fracturing with a high-strength proppant.

  6. Greensburg, Kansas: Building a Model Green Community, How Would You Rebuild a Town - Green? (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-04-01T23:59:59.000Z

    This brochure describes the rebuilding of Greensburg, Kansas, highlighting the Greensburg High Performance Buildings Database as a source of information for energy-efficient building techniques.

  7. Rebuilding It Better: Greensburg, Kansas. City of Greensburg SunChips Business Incubator (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-04-01T23:59:59.000Z

    This brochure details the energy efficient and sustainable aspects of the LEED Platinum-designed SunChips Business Incubator in Greensburg, Kansas.

  8. Rebuilding it Better: Greensburg, Kansas, Kiowa County Memorial Hospital (Brochure) (Revised)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This brochure details the sustainable and green aspects of the LEED Platinum-designed Kiowa County Memorial Hospital in Greensburg, Kansas.

  9. Our Future. Energy Independence...It's Up To Us. Hawaii Clean Energy Initiative (HCEI) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-07-01T23:59:59.000Z

    Brochure for the Hawaii Clean Energy (HCEI) Initiative that estabishes the new HCEI brand and highlights two focus areas for achieving Hawaii's clean energy goals: conserve and convert.

  10. EPAct Alternative Fuel Transportation Program: State and Alternative Fuel Provider Fleets: Frequently Asked Questions (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-03-01T23:59:59.000Z

    This brochure provides answers to frequently asked questions about the EPAct Alternative Fuel Transportation Program's State and Alternative Fuel Provider Fleets.

  11. New American Home 2010: Las Vegas, Nevada, Building Technologies Program (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-12-01T23:59:59.000Z

    This brochure details the New American Home 2010, which demonstrates the use of innovative building materials, cutting-edge design, and the latest construction techniques.

  12. Building Energy-Efficient Schools in New Orleans: Lessons Learned (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01T23:59:59.000Z

    This brochure presents the lessons learned from incorporating energy efficiency in the rebuilding and renovating of New Orleans K-12 schools after Hurricanes Katrina and Rita.

  13. Hydraulic pump

    SciTech Connect (OSTI)

    Polak, P.R.; Jantzen, D.E.

    1984-05-15T23:59:59.000Z

    This invention relates to an improved pump jack characterized by a hollow piston rod which telescopes down over the sucker rod to which it is clamped for reciprocating motion. The cylinder, in turn, is fastened in fixed position directly to the upper exposed end of the well casing. As fluid is introduced into the lower end of the cylinder it raises the piston into engagement with a pushrod housed in the upper cylinder head that lifts switch-actuating means associated therewith into a position operative to actuate a switch located adjacent thereto thereby causing the latter to change state and actuate a multi-function solenoid valve so as to cut off fluid flow to the cylinder. As gravity lowers the sucker rod and piston exhausting the hydraulic fluid therebeneath, an adjustable stop engages the pushrod from above so as to return it together with the switch-actuating means associated therewith to their original positions thereby resetting the switch to complete the operating cycle.

  14. Assistance Focus: Latin America/Caribbean (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-01-01T23:59:59.000Z

    The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to African governments, including the benefits of that assistance.

  15. Assistance Focus: Asia/Pacific Region (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2015-01-01T23:59:59.000Z

    The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to governments in the Asia/Pacific region, including the benefits of that assistance.

  16. Student housing in Portsmouth Information and application brochure 2013/2014

    E-Print Network [OSTI]

    Cocea, Mihaela

    Student housing in Portsmouth Information and application brochure 2013/2014 www.port.ac.uk/accommodation 1 Information and application brochure 2013/2014 Student housing in Portsmouth #12;Student housing accommodation 24 Shared houses and flats 25 Lodgings 25 Housing support events 26 How to apply for accommodation

  17. Realizing a Clean Energy Future: Highlights of NREL Analysis (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-12-01T23:59:59.000Z

    Profound energy system transformation is underway. In Hawaiian mythology, Maui set out to lasso the sun in order to capture its energy. He succeeded. That may have been the most dramatic leap forward in clean energy systems that the world has known. Until now. Today, another profound transformation is underway. A combination of forces is taking us from a carbon-centric, inefficient energy system to one that draws from diverse energy sources - including the sun. NREL analysis is helping guide energy systems policy and investment decisions through this transformation. This brochure highlights NREL analysis accomplishments in the context of four thematic storylines.

  18. National Renewable Energy Laboratory: 35 Years of Innovation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    This brochure is an overview of NREL's innovations over the last 35 years. It includes the lab's history and a description of the laboratory of the future. The National Renewable Energy Laboratory (NREL) is the U.S. Department of Energy's (DOE) primary national laboratory for renewable energy and energy efficiency. NREL's work focuses on advancing renewable energy and energy efficiency technologies from concept to the commercial marketplace through industry partnerships. The Alliance for Sustainable Energy, LLC, a partnership between Battelle and MRIGlobal, manages NREL for DOE's Office of Energy Efficiency and Renewable Energy.

  19. Brochure, Understanding Classification - June 2012 | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you0 ARRAM-04-07 Audit Report:FieldBodman Statement onBrighter Future:Brochure,

  20. Making Cents Out of Solar: Put More Power Into Your Building Plans (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2008-01-01T23:59:59.000Z

    This is a brochure developed specifically for residential home builders. It provides information on basic solar facts, selling tips, and important resources when incorporating solar technologies into building plans.

  1. Energy Independence . . . It's up to us. Hawaii Clean Energy Initiative (HCEI) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-11-01T23:59:59.000Z

    This tri-fold brochure provides an overview of how the State of Hawaii will work toward a goal of 70% clean energy by 2030 and the importance of meeting this goal.

  2. Engineering (MS, PhD) www.grad.clemson.edu/brochure/IndustEng

    E-Print Network [OSTI]

    Duchowski, Andrew T.

    maintenance. · The Advanced Quality Engineering Laboratory focuses on research to discover scientific design, reliability engineering, tolerance design, human-machine collaborative design optimizationIndustrial Engineering (MS, PhD) www.grad.clemson.edu/brochure/IndustEng #12;Introduction

  3. Energy-Saving Opportunities for Manufacturing Enterprises in China (International Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-10-01T23:59:59.000Z

    This English/Chinese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help Chinese manufacturing facilities reduce industrial energy intensity.

  4. Energy-Saving Opportunities for Manufacturing Companies (English/Portuguese Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01T23:59:59.000Z

    This English/Portuguese brochure describes the Industrial Technologies Program Save Energy Now model and provides information on tools and resources to help manufacturing facilities reduce industrial energy intensity.

  5. Research Support Facility (RSF): Leadership in Building Performance (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-09-01T23:59:59.000Z

    This brochure/poster provides information on the features of the Research Support Facility including a detailed illustration of the facility with call outs of energy efficiency and renewable energy technologies. Imagine an office building so energy efficient that its occupants consume only the amount of energy generated by renewable power on the building site. The building, the Research Support Facility (RSF) occupied by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) employees, uses 50% less energy than if it were built to current commercial code and achieves the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED{reg_sign}) Platinum rating. With 19% of the primary energy in the U.S. consumed by commercial buildings, the RSF is changing the way commercial office buildings are designed and built.

  6. Greensburg, Kansas: Building a Model Green Community, How Would You Rebuild a Town- Green? April 2009 (Brochure)

    Office of Energy Efficiency and Renewable Energy (EERE)

    This brochure describes the rebuilding of Greensburg, Kansas, highlighting the Greensburg High Performance Buildings Database as a source of information for energy-efficient building techniques.

  7. Downhole hydraulic seismic generator

    DOE Patents [OSTI]

    Gregory, Danny L. (Corrales, NM); Hardee, Harry C. (Albuquerque, NM); Smallwood, David O. (Albuquerque, NM)

    1992-01-01T23:59:59.000Z

    A downhole hydraulic seismic generator system for transmitting energy wave vibrations into earth strata surrounding a borehole. The system contains an elongated, unitary housing operably connected to a well head aboveground by support and electrical cabling, and contains clamping apparatus for selectively clamping the housing to the walls of the borehole. The system further comprises a hydraulic oscillator containing a double-actuating piston whose movement is controlled by an electro-servovalve regulating a high pressure hydraulic fluid flow into and out of upper and lower chambers surrounding the piston. The spent hydraulic fluid from the hydraulic oscillator is stored and pumped back into the system to provide high pressure fluid for conducting another run at the same, or a different location within the borehole.

  8. Suspensions in hydraulic fracturing

    SciTech Connect (OSTI)

    Shah, S.N. [Univ. of Oklahoma, Norman, OK (United States)

    1996-12-31T23:59:59.000Z

    Suspensions or slurries are widely used in well stimulation and hydraulic fracturing processes to enhance the production of oil and gas from the underground hydrocarbon-bearing formation. The success of these processes depends significantly upon having a thorough understanding of the behavior of suspensions used. Therefore, the characterization of suspensions under realistic conditions, for their rheological and hydraulic properties, is very important. This chapter deals with the state-of-the-art hydraulic fracturing suspension technology. Specifically it deals with various types of suspensions used in well stimulation and fracturing processes, their rheological characterization and hydraulic properties, behavior of suspensions in horizontal wells, review of proppant settling velocity and proppant transport in the fracture, and presently available measurement techniques for suspensions and their merits. Future industry needs for better understanding of the complex behavior of suspensions are also addressed. 74 refs., 21 figs., 1 tab.

  9. Kaupuni Village: A Closer Look at the First Net-Zero Energy Affordable Housing Community in Hawai'i (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-05-01T23:59:59.000Z

    This is the first of four Hawaii Clean Energy Initiative community brochures focused on HCEI success stories. This brochure focuses on the first LEED Platinum net-zero energy affordable housing community in Hawaii. Our lead NREL contact for HCEI is Ken Kelly.

  10. Hydraulic Institute Member Benefits | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37EnergySubmit a Freedom ofof

  11. Self-potential observations during hydraulic fracturing

    E-Print Network [OSTI]

    Moore, J R; Glaser, Steven D

    2007-01-01T23:59:59.000Z

    potential measurements during hydraulic fracturing of BunterSP response during hydraulic fracturing. Citation: Moore, J.observations during hydraulic fracturing, J. Geophys. Res. ,

  12. Self-potential observations during hydraulic fracturing

    E-Print Network [OSTI]

    Moore, Jeffrey R.; Glaser, Steven D.

    2008-01-01T23:59:59.000Z

    potential measurements during hydraulic fracturing of BunterMonitoring during hydraulic fracturing using the TG-2 well,fracture processes in hydraulic fracturing, Quarterly Report

  13. Geostatistical inference of hydraulic conductivity and dispersivities from hydraulic heads and tracer data

    E-Print Network [OSTI]

    Cirpka, Olaf Arie

    Geostatistical inference of hydraulic conductivity and dispersivities from hydraulic heads; accepted 25 April 2006; published 10 August 2006. [1] In groundwater, hydraulic heads and solute arrival times depend primarily on the hydraulic conductivity field and hydraulic boundary conditions. The spread

  14. Clean Cities Niche Market Overview: Refuse Haulers (Brochure)

    SciTech Connect (OSTI)

    Shea, S.

    2011-09-01T23:59:59.000Z

    Refuse haulers are ideal for the adoption of alternative fuels and advanced vehicle technologies. By using fuels like natural gas, propane, or biodiesel, and technologies like hybrid electric and hydraulic hybrid systems, the refuse-hauling sector could substantially decrease its petroleum use and greenhouse gas emissions. Fleet managers should explore the benefits of the fuels and technologies available, as well as the individual fleet needs, before adoption.

  15. Water Resources: Hydraulics and Hydrology

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Water Resources: Hydraulics and Hydrology Interview with Margaret S. Petersen #12;This manuscript RESOURCES: HYDRAULICS AND HYDROLOGY #12;Approved for public release distribution IS unlimited. #12;Preface The United States Army Corps of Engineers significantly contributed to hydraulic and hydrologic engineering

  16. Knoxville, Tennessee: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Knoxville, TN, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  17. FLOOD WARNING SYSTEM This brochure describes the flood warning system operated by the Australian Government,

    E-Print Network [OSTI]

    Greenslade, Diana

    's Flood Warning Centre in Brisbane. The system provides early warning of heavy rainfall and river risesFLOOD WARNING SYSTEM for the DON RIVER This brochure describes the flood warning system operated Local Information Don ALERT System Flood Warnings and Bulletins Interpreting Flood Warnings and River

  18. Clean Cities Tools: Tools to Help You Drive Smarter, Use Less Petroleum, and Reduce Emissions (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-06-01T23:59:59.000Z

    Clean Cities' Alternative Fuels and Advanced Vehicles Data Center (AFDC) features a wide range of Web-based tools to help vehicle fleets and individual consumers reduce their petroleum use. This brochure lists and describes Clean Cities online tools related to vehicles, alternative fueling stations, electric vehicle charging stations, fuel conservation, emissions reduction, fuel economy, and more.

  19. Tribal Energy Efficiency and Renewable Energy Development on Tribal Lands (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01T23:59:59.000Z

    This 12-page brochure provides an overview of the U.S. Department of Energy's (DOE's) Tribal Energy Program and describes the financial, technical, and educational assistance it provides to help tribes develop their renewable energy resources and reduce their energy consumption.

  20. Tribal Energy Program, Assisting Tribes to Realize Their Energy Visions (Brochure), Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01T23:59:59.000Z

    This 12-page brochure provides an overview of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy's Tribal Energy Program and describes the financial, technical, and educational assistance it provides to help tribes develop their renewable energy resources and reduce their energy consumption.

  1. Sacramento, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Sacramento, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  2. USVI Energy Road Map: Charting the Course to a Clean Energy Future (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-07-01T23:59:59.000Z

    This brochure provides an overview of the integrated clean energy deployment process and progress of the Energy Development in Island Nations U.S. Virgin Islands pilot project road map, including over-arching goals, organization, strategy, technology-specific goals and accomplishments, challenges, solutions, and upcoming milestones.

  3. NREL's Hydrogen-Powered Bus Serves as Showcase for Advanced Vehicle Technologies (AVT) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-08-01T23:59:59.000Z

    Brochure describes the hydrogen-powered internal combustion engine (H2ICE) shuttle bus at NREL. The U.S. Department of Energy (DOE) is funding the lease of the bus from Ford to demonstrate market-ready advanced technology vehicles to visitors at NREL.

  4. SunLine Leads the Way in Demonstrating Hydrogen-Fueled Bus Technologies (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-01-01T23:59:59.000Z

    This brochure describes SunLine Transit Agency's newest advanced technology fuel cell electric bus. SunLine is collaborating with the U.S. Department of Energy's Fuel Cell Technologies Program to evaluate the bus in revenue service. This bus represents the sixth generation of hydrogen-fueled buses that the agency has operated since 2000.

  5. This brochure provides you with important information about the University of Oklahoma's

    E-Print Network [OSTI]

    Oklahoma, University of

    This brochure provides you with important information about the University of Oklahoma's Voluntary Retirement Savings Plans. YOUR PLAN ENROLLMENT GUIDE #12;2 #12;3 The University of Oklahoma Voluntary.......................................................................................10 TABLE OF CONTENTS #12;4 THE UNIVERSITY OF OKLAHOMA VOLUNTARY RETIREMENT SAVINGS PLANS You are most

  6. Clean Cities Tools: Tools to Help You Save Money, Use Less Petroleum, and Reduce Emissions (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01T23:59:59.000Z

    Clean Cities Alternative Fuels and Advanced Vehicles Data Center (AFDC) features a wide range of Web-based tools to help vehicle fleets and individual consumers reduce their petroleum use. This brochure lists and describes Clean Cities online tools related to vehicles, alternative fueling stations, electric vehicle charging stations, fuel conservation, emissions reduction, fuel economy, and more.

  7. Santa Rosa, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Santa Rosa, CA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  8. Philadelphia, Pennsylvania: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Philadelphia, PA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  9. Pittsburgh, Pennsylvania: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Pittsburgh, PA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  10. Salt Lake City, Utah: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Salt Lake City, UT, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  11. Berkeley, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Berkeley, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  12. San Diego, California: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of San Diego, CA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  13. Austin, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Austin, Texas, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  14. Tucson, Arizona: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Tucson, AZ, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  15. Seattle, Washington: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Seattle, WA, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  16. Boston Massachusetts: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Boston, MA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  17. Denver, Colorado: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Denver, Colorado, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  18. Madison, Wisconsin: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Madison, WI, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  19. Ann Arbor, Michigan: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Ann Arbor, Michigan, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  20. Houston, Texas: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Houston, TX, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  1. Orlando, Florida: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Orlando, FL, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  2. Milwaukee, Wisconsin: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of Milwaukee, WI, a 2008 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  3. Accelerating Commercialization of Algal Biofuels Through Partnerships (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure describes National Renewable Energy Laboratory's (NREL's) algal biofuels research capabilities and partnership opportunities. NREL is accelerating algal biofuels commercialization through: (1) Advances in applied biology; (2) Algal strain development; (3) Development of fuel conversion pathways; (4) Techno-economic analysis; and (5) Development of high-throughput lipid analysis methodologies. NREL scientists and engineers are addressing challenges across the algal biofuels value chain, including algal biology, cultivation, harvesting and extraction, and fuel conversion. Through partnerships, NREL can share knowledge and capabilities in the following areas: (1) Algal Biology - A fundamental understanding of algal biology is key to developing cost-effective algal biofuels processes. NREL scientists are experts in the isolation and characterization of microalgal species. They are identifying genes and pathways involved in biofuel production. In addition, they have developed a high-throughput, non-destructive technique for assessing lipid production in microalgae. (2) Cultivation - NREL researchers study algal growth capabilities and perform compositional analysis of algal biomass. Laboratory-scale photobioreactors and 1-m2 open raceway ponds in an on-site greenhouse allow for year-round cultivation of algae under a variety of conditions. A bioenergy-focused algal strain collection is being established at NREL, and our laboratory houses a cryopreservation system for long-term maintenance of algal cultures and preservation of intellectual property. (3) Harvesting and Extraction - NREL is investigating cost-effective harvesting and extraction methods suitable for a variety of species and conditions. Areas of expertise include cell wall analysis and deconstruction and identification and utilization of co-products. (4) Fuel Conversion - NREL's excellent capabilities and facilities for biochemical and thermochemical conversion of biomass to biofuels are being applied to algal biofuels processes. Analysts are also testing algal fuel properties to measure energy content and ensure compatibility with existing fueling infrastructure. (5) Cross-Cutting Analysis - NREL scientists and engineers are conducting rigorous techno-economic analyses of algal biofuels processes. In addition, they are performing a full life cycle assessment of the entire algae-to-biofuels process.

  4. Hydraulic waste energy recovery

    SciTech Connect (OSTI)

    Lederer, C.C.; Thomas, A.H.; McGuire, J.L. (Detroit Buildings and Safety Engineering Dept., MI (USA))

    1990-12-01T23:59:59.000Z

    Water distribution systems are typically a municipality's largest consumer of energy and greatest expense. The water distribution network has varying pressure requirements due to the age of the pipeline and topographical differences. Certain circumstances require installation of pressure reducing devices in the pipeline to lower the water pressure in the system. The consequence of this action is that the hydraulic energy supplied by the high lift or booster pumps is wasted in the process of reducing the pressure. A possible solution to capture the waste hydraulic energy is to install an in-line electricity generating turbine. Energy recovery using in-line turbine systems is an emerging technology. Due to the lack of technical and other relevant information on in-line turbine system installations, questions of constructability and legal issues over the power service contract have yet to be answered. This study seeks to resolve these questions and document the findings so that other communities may utilize this information. 10 figs.

  5. The Use of Variable Speed Drives to Retrofit Hydraulic Injection Molding Machines

    E-Print Network [OSTI]

    Ambs, L.; Frerker, M. M.

    Research Institute, Palo Alto, California. 8.) Remley, Carl H. (1993) "Measured performance of variable speed drives on injection molding hydraulic pumps." Energy Management Consulting and Equipment, Inc., North Attleboro, Massachusetts'. 9.) Rosato...

  6. Better Building Alliance, Plug and Process Loads in Commercial Buildings: Capacity and Power Requirement Analysis (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01T23:59:59.000Z

    This brochure addresses gaps in actionable knowledge that can help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. This brochure should be used to make these decisions so systems can operate more energy efficiently; upfront capital costs will also decrease. This information can also be used to drive changes in negotiations about PPL energy demands. It should enable brokers and tenants to agree about lower PPL capacities. Owner-occupied buildings will also benefit. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems.

  7. Hydraulic mining method

    DOE Patents [OSTI]

    Huffman, Lester H. (Kent, WA); Knoke, Gerald S. (Kent, WA)

    1985-08-20T23:59:59.000Z

    A method of hydraulically mining an underground pitched mineral vein comprising drilling a vertical borehole through the earth's lithosphere into the vein and drilling a slant borehole along the footwall of the vein to intersect the vertical borehole. Material is removed from the mineral vein by directing a high pressure water jet thereagainst. The resulting slurry of mineral fragments and water flows along the slant borehole into the lower end of the vertical borehole from where it is pumped upwardly through the vertical borehole to the surface.

  8. Hydraulic and Habitat Suitability Analyses Technical Memorandum

    E-Print Network [OSTI]

    Appendix D Hydraulic and Habitat Suitability Analyses Technical Memorandum #12;COPYRIGHT DECEMBER Series 2 and Pond Series 3 Hydraulic and Habitat Suitability Analyses Prepared for Bureau of Reclamation HILL, INC. III Hydraulic and Habitat Suitability Analyses

  9. HYDRAULIC CEMENT PREPARATION FROM LURGI SPENT SHALE

    E-Print Network [OSTI]

    Mehta, P.K.

    2013-01-01T23:59:59.000Z

    Investigations on hydraulic cement from spent oil shale,"April 16-18, 1980 HYDRAULIC CEMENT PREPARATION FROM LURGIpressi ve b strength, MPa this cement in moist environments.

  10. Electrokinetic high pressure hydraulic system

    DOE Patents [OSTI]

    Paul, Phillip H. (Livermore, CA); Rakestraw, David J. (Fremont, CA)

    2000-01-01T23:59:59.000Z

    A compact high pressure hydraulic pump having no moving mechanical parts for converting electric potential to hydraulic force. The electrokinetic pump, which can generate hydraulic pressures greater than 2500 psi, can be employed to compress a fluid, either liquid or gas, and manipulate fluid flow. The pump is particularly useful for capillary-base systems. By combining the electrokinetic pump with a housing having chambers separated by a flexible member, fluid flow, including high pressure fluids, is controlled by the application of an electric potential, that can vary with time.

  11. Indirect Adaptive Robust Control of Electro-Hydraulic Systems Driven by Single-Rod Hydraulic Actuator

    E-Print Network [OSTI]

    Yao, Bin

    Indirect Adaptive Robust Control of Electro-Hydraulic Systems Driven by Single-Rod Hydraulic) of electro-hydraulic systems driven by single- rod hydraulic actuators. Unlike the tracking that the proposed IARC achieves good tracking performance and accurate parameter estimation. INTRODUCTION Electro-hydraulic

  12. Recover Power with Hydraulic Motors

    E-Print Network [OSTI]

    Brennan, J. R.

    1982-01-01T23:59:59.000Z

    displacement device, the HPRM torque and speed are almost completely independent - unlike hydraulic power recovery turbines (centrifugal motors). Three screw HPRM's have low moments of inertia, operate at low vibration and noise levels and extract power...

  13. Production Hydraulic Packer Field Test

    SciTech Connect (OSTI)

    Schneller, Tricia; Salas, Jose

    2000-06-30T23:59:59.000Z

    In October 1999, the Rocky Mountain Oilfield Testing Center and Halliburton Energy Services cooperated on a field test of Halliburton's new Production Hydraulic Packer technology on Well 46-TPX-10 at Naval Petroleum Reserve No. 3 near Casper, WY. Performance of the packer was evaluated in set and unset operations. The packer's ability to seal the annulus between the casing and tubing was hydraulically tested and the results were recorded.

  14. Numerical simulation of hydraulic fracturing

    E-Print Network [OSTI]

    Warner, Joseph Barnes

    1987-01-01T23:59:59.000Z

    ~ared that the results of such treatments were not always adequately described by the two-dimensional models. With recent advances in hydraulic fracturing and computing technology, attempts have been made to formulate more realistic fracture models. These three...NUMERICAL SIMULATION OF HYDRAULIC FRACTURING A Thesis by JOSEPH BARNES WARNER Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 1987 Maj or Subj ect...

  15. Research Support Facility Data Center: An Example of Best Practices Implementation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01T23:59:59.000Z

    This brochure details the design and operations of the Research Support Facility (RSF) data center. The National Renewable Energy Laboratory (NREL) is world-renowned for its commitment to green building construction. To further this commitment to green building and leading by example, NREL included an ultra-energy-efficient data center in the laboratory's new Research Support Facility (RSF), which recently received a Leadership in Energy and Environmental Design{reg_sign} (LEED) Platinum designation from the U.S. Green Building Council.

  16. Hawai'i's EVolution: Hawai'i Powered. Technology Driven. (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-05-01T23:59:59.000Z

    This Hawaii Clean Energy Initiative (HCEI) brochure outlines Hawaii's energy and transportation goals and the implementation of electric vehicles (EV) and electric vehicle infrastructure since HCEI began in 2008. It includes information about Hawaii's role in leading the nation in available EV charging infrastructure per capita; challenges for continuing to implement EV technology; features on various successful EV users, including the Hawaiian Electric Company, Enterprise Rent-A-Car, and Senator Mike Gabbard; how EVs can integrate into and help propel Hawaii's evolving smart grid; and much more.

  17. Brochures, Logos, & Information Resources | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron4 Self-Scrubbing:,, ,Development1U CO1) 1Metal thisBrochures, Logos,

  18. Fractured: Experts examine the contentious issue of hydraulic fracturing water use

    E-Print Network [OSTI]

    Wythe, Kathy

    2013-01-01T23:59:59.000Z

    of Fracture Fluid Performance in Oil Shale with Surfactant Additives by X-Ray Tomography Methods (Crisman Institute: Schechter) Re-Use of Produced Waters as Hydraulic Fracturing Fluids (Crisman Institute: Nasr-El-Din) In a joint House Commi#20;ee...

  19. INTERPRETATION OF A HYDRAULIC FRACTURING EXPERIMENT, MONTICELLO, SOUTH CAROLINA

    E-Print Network [OSTI]

    Narasimhan, T.N.

    2014-01-01T23:59:59.000Z

    Letters INTERPRETATION OF A HYDRAULIC FRACTURING EXPERIMENT,12091 INTERPRETATION OF A HYDRAULIC FRACTURING EXPERIMENT,transient data from a hydraulic fracturing experiment have

  20. Mercury-Contaminated Hydraulic Mining Debris in San Francisco Bay

    E-Print Network [OSTI]

    Bouse, Robin M; Fuller, Christopher C; Luoma, Sam; Hornberger, Michelle I; Jaffe, Bruce E; Smith, Richard E

    2010-01-01T23:59:59.000Z

    Contaminated Hydraulic Mining Debris in San Francisco BayAbstract The hydraulic gold-mining process used during thecreated by hydraulic gold mining in the Sierra Nevada,

  1. New York City, New York: Solar in Action (Brochure), Solar America Cities, Energy Efficiency & Renewable Energy (EERE)

    Broader source: Energy.gov [DOE]

    This brochure provides an overview of the challenges and successes of New York City, NY, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

  2. Electrokinetic high pressure hydraulic system

    DOE Patents [OSTI]

    Paul, Phillip H.; Rakestraw, David J.; Arnold, Don W.; Hencken, Kenneth R.; Schoeniger, Joseph S.; Neyer, David W.

    2003-06-03T23:59:59.000Z

    An electrokinetic high pressure hydraulic pump for manipulating fluids in capillary-based system. The pump uses electro-osmotic flow to provide a high pressure hydraulic system, having no moving mechanical parts, for pumping and/or compressing fluids, for providing valve means and means for opening and closing valves, for controlling fluid flow rate, and manipulating fluid flow generally and in capillary-based systems (microsystems), in particular. The compact nature of the inventive high pressure hydraulic pump provides the ability to construct a micro-scale or capillary-based HPLC system that fulfills the desire for small sample quantity, low solvent consumption, improved efficiency, the ability to run samples in parallel, and field portability. Control of pressure and solvent flow rate is achieved by controlling the voltage applied to an electrokinetic pump.

  3. Method for directional hydraulic fracturing

    DOE Patents [OSTI]

    Swanson, David E. (West St. Paul, MN); Daly, Daniel W. (Crystal, MN)

    1994-01-01T23:59:59.000Z

    A method for directional hydraulic fracturing using borehole seals to confine pressurized fluid in planar permeable regions, comprising: placing a sealant in the hole of a structure selected from geologic or cemented formations to fill the space between a permeable planar component and the geologic or cemented formation in the vicinity of the permeable planar component; making a hydraulic connection between the permeable planar component and a pump; permitting the sealant to cure and thereby provide both mechanical and hydraulic confinement to the permeable planar component; and pumping a fluid from the pump into the permeable planar component to internally pressurize the permeable planar component to initiate a fracture in the formation, the fracture being disposed in the same orientation as the permeable planar component.

  4. Electrokinetic high pressure hydraulic system

    DOE Patents [OSTI]

    Paul, Phillip H. (Livermore, CA); Rakestraw, David J. (Fremont, CA); Arnold, Don W. (Livermore, CA); Hencken, Kenneth R. (Pleasanton, CA); Schoeniger, Joseph S. (Oakland, CA); Neyer, David W. (Castro Valley, CA)

    2001-01-01T23:59:59.000Z

    An electrokinetic high pressure hydraulic pump for manipulating fluids in capillary-based systems. The pump uses electro-osmotic flow to provide a high pressure hydraulic system, having no moving mechanical parts, for pumping and/or compressing fluids, for providing valve means and means for opening and closing valves, for controlling fluid flow rate, and manipulating fluid flow generally and in capillary-based systems (Microsystems), in particular. The compact nature of the inventive high pressure hydraulic pump provides the ability to construct a micro-scale or capillary-based HPLC system that fulfills the desire for small sample quantity, low solvent consumption, improved efficiency, the ability to run samples in parallel, and field portability. Control of pressure and solvent flow rate is achieved by controlling the voltage applied to an electrokinetic pump.

  5. Hydraulic jumps on an incline

    E-Print Network [OSTI]

    Jean-Luc Thiffeault; Andrew Belmonte

    2010-09-01T23:59:59.000Z

    When a fluid jet strikes an inclined solid surface at normal incidence, gravity creates a flow pattern with a thick outer rim resembling a parabola and reminiscent of a hydraulic jump. There appears to be little theory or experiments describing simple aspects of this phenomenon, such as the maximum rise height of the fluid above the impact point, and its dependence on jet velocity and inclination angle. We address this with experiments, and present a simple theory based on horizontal hydraulic jumps which accounts for the rise height and its scaling, though without describing the shape of the parabolic envelope.

  6. Electokinetic high pressure hydraulic system

    DOE Patents [OSTI]

    Paul, Phillip H. (Livermore, CA); Rakestraw, David J. (Fremont, CA)

    2000-01-01T23:59:59.000Z

    A compact high pressure hydraulic system having no moving parts for converting electric potential to hydraulic force and for manipulating fluids. Electro-osmotic flow is used to provide a valve and means to compress a fluid or gas in a capillary-based system. By electro-osmotically moving an electrolyte between a first position opening communication between a fluid inlet and outlet and a second position closing communication between the fluid inlet and outlet the system can be configured as a valve. The system can also be used to generate forces as large as 2500 psi that can be used to compress a fluid, either a liquid or a gas.

  7. Hydraulic conductivity imaging from 3-D transient hydraulic tomography at several pumping/observation densities

    E-Print Network [OSTI]

    Barrash, Warren

    Hydraulic conductivity imaging from 3-D transient hydraulic tomography at several pumping August 2013; accepted 7 September 2013; published 13 November 2013. [1] 3-D Hydraulic tomography (3-D HT (primarily hydraulic conductivity, K) is estimated by joint inversion of head change data from multiple

  8. Ensemble smoother assimilation of hydraulic head and return flow data to estimate hydraulic conductivity distribution

    E-Print Network [OSTI]

    Bau, Domenico A.

    Ensemble smoother assimilation of hydraulic head and return flow data to estimate hydraulic and data measurements, an ensemble smoother (ES) to provide enhanced estimates of aquifer hydraulic conductivity (K) through assimilation of hydraulic head (H) and groundwater return flow volume (RFV

  9. The Environmental Injector: Beyond Common Rail and Hydraulic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Environmental Injector: Beyond Common Rail and Hydraulic Intensificatiion The Environmental Injector: Beyond Common Rail and Hydraulic Intensificatiion The Environmental...

  10. [Establishment and support of the International Power Institute]. Quarterly technical progress report, October--December, 1997

    SciTech Connect (OSTI)

    Coles, J.E.

    1998-04-02T23:59:59.000Z

    This is the quarterly report of the International Power Institute for October--December 1997. The topics of the report include pre-cooperative agreement activities, a discussion of the deputy director position, the IPI brochure, exploration of collaborative arrangements, formation of the IPI advisory board, a review of the advisory board meeting, report of a meeting with African electric utility executives, report of a visit to South Africa to explore a collaborative relationship.

  11. Hydraulic Fracture: multiscale processes and moving

    E-Print Network [OSTI]

    Peirce, Anthony

    Hydraulic Fracture: multiscale processes and moving interfaces Anthony Peirce Department Mitchell (UBC) · Ed Siebrits (SLB, Houston) #12;2 Outline · What is a hydraulic fracture? · Scaling Fluid Proppant #12;6 An actual hydraulic fracture #12;7 HF experiment (Jeffrey et al CSIRO) #12;8 1D

  12. Hydraulic Fracture: multiscale processes and moving

    E-Print Network [OSTI]

    Peirce, Anthony

    Hydraulic Fracture: multiscale processes and moving interfaces Anthony Peirce Department Siebrits (SLB, Houston) #12;2 Outline · What is a hydraulic fracture? · Mathematical models of hydraulic fracture · Scaling and special solutions for 1-2D models · Numerical modeling for 2-3D problems

  13. LMH Laboratory for Hydraulic Machines Supervisor

    E-Print Network [OSTI]

    Diggavi, Suhas

    rotating (runner-impeller) and stationary (guide vane and stay vane) blades in pump-turbine hydraulicLMH Laboratory for Hydraulic Machines Supervisor: Dr. Mohamed Farhat (LMH) Doctoral Assistants hydraulic lift surface in pump mode and detail the flow behaviour under these conditions. This is a first

  14. Hydraulic Geometry: Empirical Investigations and Theoretical Approaches

    E-Print Network [OSTI]

    Eaton, Brett

    Hydraulic Geometry: Empirical Investigations and Theoretical Approaches B.C. Eatona, a Department of Geography, The University of British Columbia 1984 West Mall, Vancouver, BC, V6T 1Z2 Abstract Hydraulic. One approach to hydraulic geometry considers temporal changes at a single location due to variations

  15. Numerical Study of a Turbulent Hydraulic Jump

    E-Print Network [OSTI]

    Zhao, Qun

    Numerical Study of a Turbulent Hydraulic Jump Qun Zhao, Shubhra Misra, Ib. A. Svendsen and James T of a Turbulent Hydraulic Jump ­ p.1/14 #12;Objective Our ultimate goal is to study the breaking waves. Numerical Study of a Turbulent Hydraulic Jump ­ p.2/14 #12;A moving bore Qiantang Bore China (Courtesy of Dr J

  16. LA-12968-MS The Unsaturated Hydraulic

    E-Print Network [OSTI]

    LA-12968-MS The Unsaturated Hydraulic Characteristics of the BandelierTuff LosN A T I O N A L L A B technical correctness. #12;The Unsaturated Hydraulic Characteristics of the Bandelier Tuff David B. Rogers........................................................................................................4 Hydraulic Data Presentation

  17. 4, 37193769, 2007 A model for hydraulic

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    HESSD 4, 3719­3769, 2007 A model for hydraulic redistribution G. G. Amenu and P. Kumar Title Page are under open-access review for the journal Hydrology and Earth System Sciences A model for hydraulic;HESSD 4, 3719­3769, 2007 A model for hydraulic redistribution G. G. Amenu and P. Kumar Title Page

  18. ENVE 417 HYDRAULIC DESIGN TOPIC SYLLABUS

    E-Print Network [OSTI]

    Clark, Shirley E.

    Applications in Hydraulic Engineering, 5th Edition, Haestad Press. 2002 Shun Dar Lin. Water and WastewaterENVE 417 HYDRAULIC DESIGN TOPIC SYLLABUS Current Catalog Data: Design of water and waste water. John Wiley & Sons, Inc. New York, NY. 2001. Hydraulic Design Handbook, Larry W. Mays, McGraw-Hill, New

  19. Hydraulic Cooling Tower Driver- The Innovation

    E-Print Network [OSTI]

    Dickerson, J. A.

    -drive eliminates these items from the drive train and puts the same electric motor HP at ground level close coupled to a hydraulic pump, filters, and oil reservoir. Hydraulic lines bring oil pressure to the hydraulic motor, which is more than 75% less weight than...

  20. CEBC Brochure

    E-Print Network [OSTI]

    Lyon, Christopher; Fahey, Darryl; Subramaniam, Bala

    2006-06-08T23:59:59.000Z

    chemicals from alternate feedstocks such as coal and biomass ? Process intensi?cation for energy ef?ciency and safety CEBC?s carefully designed research, education, and industry partnership programs will deliver cutting edge science and innovative... System with Mass Spectrometer (TAP) High Pressure Slurry and Basket Reactors Analytical Equipment : Gas Chromatographs (TCD, FID, PID, and ELCD detectors), Differential Refractormeter, Mass Spectrometer, pH, DO, Ozone meters etc. Listing...

  1. LM Brochure

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetter Report:40PM toLED Lighting5-15 LM 05-15 NEPATitle, Legacy

  2. Brochure 4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced Materials FindAdvanced MaterialsDepartmentBrinkmankind found.

  3. Overview Brochures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and BiofuelsOversight Board The AmesCompanies, First7

  4. Recent advances in hydraulic fracturing

    SciTech Connect (OSTI)

    Gidley, J.L.

    1989-01-01T23:59:59.000Z

    This book is a reference to the application of significant technological advances in hydraulic fracturing. It features illustrative problems to demonstrate specific applications of advanced technologies. Chapters examine pretreatment formation evaluation, rock mechanics and fracture geometry, 2D and 3D fracture-propagation models, propping agents and fracture conductivity, fracturing fluids and additives, fluid leakoff, flow behavior, proppant transport, treatment design, well completions, field implementation, fracturing-pressure analysis, postfracture formation evaluation, fracture azimuth and geometry determination, and economics of fracturing.

  5. Hydraulic Conductivity Measurements Barrow 2014

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Katie McKnight; Tim Kneafsey; Craig Ulrich; Jil Geller

    Six individual ice cores were collected from Barrow Environmental Observatory in Barrow, Alaska, in May of 2013 as part of the Next Generation Ecosystem Experiment (NGEE). Each core was drilled from a different location at varying depths. A few days after drilling, the cores were stored in coolers packed with dry ice and flown to Lawrence Berkeley National Laboratory (LBNL) in Berkeley, CA. 3-dimensional images of the cores were constructed using a medical X-ray computed tomography (CT) scanner at 120kV. Hydraulic conductivity samples were extracted from these cores at LBNL Richmond Field Station in Richmond, CA, in February 2014 by cutting 5 to 8 inch segments using a chop saw. Samples were packed individually and stored at freezing temperatures to minimize any changes in structure or loss of ice content prior to analysis. Hydraulic conductivity was determined through falling head tests using a permeameter [ELE International, Model #: K-770B]. After approximately 12 hours of thaw, initial falling head tests were performed. Two to four measurements were collected on each sample and collection stopped when the applied head load exceeded 25% change from the original load. Analyses were performed between 2 to 3 times for each sample. The final hydraulic conductivity calculations were computed using methodology of Das et al., 1985.

  6. Combined hydraulic and regenerative braking system

    DOE Patents [OSTI]

    Venkataperumal, Rama R. (Troy, MI); Mericle, Gerald E. (Mount Clemens, MI)

    1981-06-02T23:59:59.000Z

    A combined hydraulic and regenerative braking system and method for an electric vehicle, with the braking system being responsive to the applied hydraulic pressure in a brake line to control the braking of the vehicle to be completely hydraulic up to a first level of brake line pressure, to be partially hydraulic at a constant braking force and partially regenerative at a linearly increasing braking force from the first level of applied brake line pressure to a higher second level of brake line pressure, to be partially hydraulic at a linearly increasing braking force and partially regenerative at a linearly decreasing braking force from the second level of applied line pressure to a third and higher level of applied line pressure, and to be completely hydraulic at a linearly increasing braking force from the third level to all higher applied levels of line pressure.

  7. Understanding Hydraulic Processes Primary Investigator: Frank H. Quinn

    E-Print Network [OSTI]

    Understanding Hydraulic Processes Primary Investigator: Frank H. Quinn Overview The hydraulic and connecting channel hydraulics models for use in Great Lakes water resource studies. 2000 Plans Niagara River Hydraulic Studies: Detailed analysis of the impact of hydraulic regime changes in the Niagara River

  8. IOWA INSTITUTE OF HYDRAULIC RESEARCH COLLEGE OF ENGINEERING

    E-Print Network [OSTI]

    Stanier, Charlie

    SPONSORED RESEARCH PROJECTS Study Subject Sponsor Investigator(s) * The Effect of Ethanol on BTEX Migration at Leavenworth Bend COE-OD Holly ** Water Quality Study of Coralville Lake COE-RI Johnson * Surface Water Quality * Scholar and Multimedia Exchanges in Environmental/Water Resources Engineering and Sciences DOEd Jain

  9. IOWA INSTITUTE OF HYDRAULIC RESEARCH THE UNIVERSITY OF IOWA

    E-Print Network [OSTI]

    Stanier, Charlie

    of Deposition Patterns in Iowa Reservoirs COE(RI) Holly ** Model Study of Powerhouse Design for Hydropower of Radar Data in Tropical Rainfall Measuring Mission NASA Krajewski *

  10. IOWA INSTITUTE OF HYDRAULIC RESEARCH THE UNIVERSITY OF IOWA

    E-Print Network [OSTI]

    Stanier, Charlie

    Marshall * Hydrothermal Model Study of Lake Morgan Cooling Pond for Four Corners Power Plant BI Jain Station EKP Nakato * Advising and Consulting During Construction of Raritan River (New Jersey) Power Plant by a Blade ARO Marshall * Simulation of the Passage of a Blade Through a Vortex in a Viscous Fluid ARO

  11. IOWA INSTITUTE OF HYDRAULIC RESEARCH COLLEGE OF ENGINEERING

    E-Print Network [OSTI]

    Stanier, Charlie

    ** Advising and Consulting During Construction of Raritan River (New Jersey) Power Plant ENJ Ettema Enhanced Simulation of the Passage of a Blade Through a Vortex in a Viscous Fluid ARO Marshall * IAHR San Francisco Congress 1997 ASCE Holly ** Hydrothermal Model Study of Lake Morgan Cooling Pond for Four Corners Power

  12. Hydraulic Institute Mission and Vision | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov.Energy02.pdf7 OPAM Flash2011-37EnergySubmit a Freedom ofofMission and Vision

  13. Hydraulic Institute Mission and Vision | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked Questions for DOEthe Ranking Member, Subcommittee on

  14. Microseismic Tracer Particles for Hydraulic Fracturing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The trend toward production of hydrocarbons from unconventional reservoirs (tight gas, shale oilgas) has caused a large increase in the use of hydraulic fracture stimulation of...

  15. Control rod drive hydraulic system

    DOE Patents [OSTI]

    Ose, Richard A. (San Jose, CA)

    1992-01-01T23:59:59.000Z

    A hydraulic system for a control rod drive (CRD) includes a variable output-pressure CR pump operable in a charging mode for providing pressurized fluid at a charging pressure, and in a normal mode for providing the pressurized fluid at a purge pressure, less than the charging pressure. Charging and purge lines are disposed in parallel flow between the CRD pump and the CRD. A hydraulic control unit is disposed in flow communication in the charging line and includes a scram accumulator. An isolation valve is provided in the charging line between the CRD pump and the scram accumulator. A controller is operatively connected to the CRD pump and the isolation valve and is effective for opening the isolation valve and operating the CRD pump in a charging mode for charging the scram accumulator, and closing the isolation valve and operating the CRD pump in a normal mode for providing to the CRD through the purge line the pressurized fluid at a purge pressure lower than the charging pressure.

  16. Soil Hydraulic Characteristics of a Small Southwest Oregon Watershed Following

    E-Print Network [OSTI]

    Standiford, Richard B.

    --------------------------------------------- Soil Hydraulic Characteristics of a Small Southwest by a high-intensity burn over areas of steep topography. The areal distribution of soil hydraulic of infiltration capacity, saturated hydraulic conductivity, and soil moisture characteristics. Also, measures

  17. Effective hydraulic conductivity of bounded, strongly heterogeneous porous media

    E-Print Network [OSTI]

    Tartakovsky, Daniel M.

    Effective hydraulic conductivity of bounded, strongly heterogeneous porous media Evangelos K of Arizona, Tucson Abstract. We develop analytical expressions for the effective hydraulic conductivity Ke boundaries. The log hydraulic conductivity Y forms a Gaussian, statistically homogeneous and anisotropic

  18. Hydraulic and slurry flows through a channel contraction

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    Hydraulic and slurry flows through a channel contraction Onno Bokhove o, Twente #12;Hydraulic flow through channel contraction Outline · 1. Introduction · 2. Experiments · 3. Conclusions · References ISSF 2008 University of Twente Page 2 #12;Hydraulic flow through channel contraction

  19. Scaling hydraulic properties of a macroporous soil Binayak P. Mohanty

    E-Print Network [OSTI]

    Mohanty, Binayak P.

    Scaling hydraulic properties of a macroporous soil Binayak P. Mohanty U.S. Salinity Laboratory, Riverside, California Abstract. Macroporous soils exhibit significant differences in their hydraulic properties for different pore domains. Multimodal hydraulic functions may be used to describe

  20. Grundfos HVAC OEM Efficient water hydraulics

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    complexity ·20 years of experience in hydraulics for the Boiler System industry. ·Key success factor is our Benefits with an integrated solution #12;Heat pump unit with storage tank 1 2 Efficient water hydraulics 3 return Heatin g supply Cold wate r Hot water PRV Drain 3 way valve 1 2 3 air ventPT Grundfos flow sensor

  1. Creation of an Engineered Geothermal System through Hydraulic...

    Office of Environmental Management (EM)

    Creation of an Engineered Geothermal System through Hydraulic and Thermal Stimulation Creation of an Engineered Geothermal System through Hydraulic and Thermal Stimulation Project...

  2. Fracture Evolution Following a Hydraulic Stimulation within an...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evolution Following a Hydraulic Stimulation within an EGS Reservoir Fracture Evolution Following a Hydraulic Stimulation within an EGS Reservoir Fracture Evolution Following a...

  3. An automated tool for three types of saturated hydraulic conductivity...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automated tool for three types of saturated hydraulic conductivity laboratory measurements. An automated tool for three types of saturated hydraulic conductivity laboratory...

  4. Thermal hydraulics development for CASL

    SciTech Connect (OSTI)

    Lowrie, Robert B [Los Alamos National Laboratory

    2010-12-07T23:59:59.000Z

    This talk will describe the technical direction of the Thermal-Hydraulics (T-H) Project within the Consortium for Advanced Simulation of Light Water Reactors (CASL) Department of Energy Innovation Hub. CASL is focused on developing a 'virtual reactor', that will simulate the physical processes that occur within a light-water reactor. These simulations will address several challenge problems, defined by laboratory, university, and industrial partners that make up CASL. CASL's T-H efforts are encompassed in two sub-projects: (1) Computational Fluid Dynamics (CFD), (2) Interface Treatment Methods (ITM). The CFD subproject will develop non-proprietary, scalable, verified and validated macroscale CFD simulation tools. These tools typically require closures for their turbulence and boiling models, which will be provided by the ITM sub-project, via experiments and microscale (such as DNS) simulation results. The near-term milestones and longer term plans of these two sub-projects will be discussed.

  5. Hydraulically amplified PZT mems actuator

    DOE Patents [OSTI]

    Miles, Robin R.

    2004-11-02T23:59:59.000Z

    A hydraulically amplified microelectromechanical systems actuator. A piece of piezoelectric material or stacked piezo bimorph is bonded or deposited as a thin film. The piece is operatively connected to a primary membrane. A reservoir is operatively connected to the primary membrane. The reservoir contains a fluid. A membrane is operatively connected to the reservoir. In operation, energizing the piezoelectric material causing the piezoelectric material to bow. Bowing of the piezoelectric material causes movement of the primary membrane. Movement of the primary membrane results in a force in being transmitted to the liquid in the reservoir. The force in the liquid causes movement of the membrane. Movement of the membrane results in an operating actuator.

  6. Standard Hydrogen Test Protocols for the NREL Sensor Testing Laboratory (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-12-01T23:59:59.000Z

    This brochure summarizes the test protocols used in the NREL Hydrogen Sensor Test Laboratory for the quantitative assessment of critical analytical performance specifications for hydrogen sensors. Researchers at the NREL Hydrogen Safety Sensor Test Laboratory developed a variety of test protocols to quantitatively assess critical analytical performance specifications for hydrogen sensors. Many are similar to, but typically more rigorous than, the test procedures mandated by ISO Standard 26142 (Hydrogen Detector for Stationary Applications). Specific protocols were developed for linear range, short-term stability, and the impact of fluctuations in temperature (T), pressure (P), relative humidity (RH), and chemical environment. Specialized tests (e.g., oxygen requirement) may also be performed. Hydrogen safety sensors selected for evaluation are subjected to a thorough regimen of test protocols, as described. Sensor testing is performed at NREL on custom-built sensor test fixtures. Environmental parameters such as T, P, RH, and gas composition are rigorously controlled and monitored. The NREL evaluations are performed on commercial hydrogen detectors, on emerging sensing technologies, and for end users to validate sensor performance for specific application needs. Test results and data are shared with the manufacturer or client via summary reports, teleconference phone calls, and, when appropriate, site visits to manufacturer facilities. Client representatives may also monitor NREL's operation while their technologies are being tested. Manufacturers may use test data to illustrate the analytical capability of their technologies and, more importantly, to guide future developments. NREL uses the data to assess technology gaps and deployment considerations. Per NREL Sensor Testing Laboratory policy, test results are treated as proprietary and are not shared with other manufacturers or other entities without permission. The data may be used by NREL in open publications (journal articles, presentations, outreach support, and other reports), but will not be attributed to a specific vendor.

  7. Selected factors influencing GCL hydraulic conductivity

    SciTech Connect (OSTI)

    Petrov, R.J. [Trow Consulting Engineers Ltd., Brampton, Ontario (Canada); Rowe, R.K.; Quigley, R.M. [Univ. of Western Ontario, London, Ontario (Canada)

    1997-08-01T23:59:59.000Z

    A series of confined swell and hydraulic conductivity tests were conducted on a needle-punched geosynthetic clay liner (GCL) with water as the hydrating medium and reference permeant. Increases in the static confining stress and the needle-punching both restricted GCL swell and contributed to lower bulk GCL void ratios and hence significantly lower hydraulic conductivity values. A well defined linear-log relationship is found between the bulk void ratio and hydraulic conductivity. The number of pore volumes of permeant flow and consequently the level of chemical equilibrium is shown to have a significant effect on the hydraulic conductivity. It is shown that there is a decrease in hydraulic conductivity for small amounts of permeant flow for all ethanol/water mixtures examined. At or near chemical equilibrium, low concentration mixtures (25 and 50% ethanol) continued to produce relative decreases in GCL hydraulic conductivity due to the increased viscosity of the permeant; however, highly concentrated mixtures (75 and 100% ethanol) produced relative increases in GCL hydraulic conductivity arising from double layer contraction. The implications are discussed.

  8. Bubble visualization in a simulated hydraulic jump

    E-Print Network [OSTI]

    Witt, Adam; Shen, Lian

    2013-01-01T23:59:59.000Z

    This is a fluid dynamics video of two- and three-dimensional computational fluid dynamics simulations carried out at St. Anthony Falls Laboratory. A transient hydraulic jump is simulated using OpenFOAM, an open source numerical solver. A Volume of Fluid numerical method is employed with a realizable k-epsilon turbulence model. The goal of this research is to model the void fraction and bubble size in a transient hydraulic jump. This fluid dynamics video depicts the air entrainment characteristics and bubble behavior within a hydraulic jump of Froude number 4.82.

  9. Exploring the physicochemical processes that govern hydraulic fracture through laboratory

    E-Print Network [OSTI]

    Belmonte A; Connelly P

    ) containing model boreholes as an analog to hydraulic fracturing with various fracture-driving fluids. The

  10. Analysis of Small-Scale Hydraulic Systems Jicheng Xia

    E-Print Network [OSTI]

    Durfee, William K.

    power density in a hydraulic system are the design the containing structure and the seals. There has, MN, 55455 Email: wkdurfee@umn.edu We investigated small-scale hydraulic power system using a system- mine whether the high power density advantage of hydraulic power system holds at small sizes. Hydraulic

  11. Fault Detection, Identification and Accommodation for an Electro-hydraulic

    E-Print Network [OSTI]

    Yao, Bin

    Fault Detection, Identification and Accommodation for an Electro-hydraulic System: An Adaptive in electro-hydraulic systems. It is well known fact that any realistic model of a hydraulic system suffers, such a scheme becomes a natural choice for designing robust fault detection algorithms for electro-hydraulic

  12. Acoustic Character Of Hydraulic Fractures In Granite

    E-Print Network [OSTI]

    Paillet, Frederick I.

    1983-01-01T23:59:59.000Z

    Hydraulic fractures in homogeneous granitic rocks were logged with conventional acoustic-transit-time, acoustic-waveform, and acoustic-televiewer logging systems. Fractured intervals ranged in depth from 45 to 570m. and ...

  13. Gas condensate damage in hydraulically fractured wells

    E-Print Network [OSTI]

    Adeyeye, Adedeji Ayoola

    2004-09-30T23:59:59.000Z

    Company. The well was producing a gas condensate reservoir and questions were raised about how much drop in flowing bottomhole pressure below dewpoint would be appropriate. Condensate damage in the hydraulic fracture was expected to be of significant...

  14. Geomechanical review of hydraulic fracturing technology

    E-Print Network [OSTI]

    Arop, Julius Bankong

    2013-01-01T23:59:59.000Z

    Hydraulic fracturing as a method for recovering unconventional shale gas has been around for several decades. Significant research and improvement in field methods have been documented in literature on the subject. The ...

  15. Self-potential observations during hydraulic fracturing

    E-Print Network [OSTI]

    Moore, Jeffrey R.; Glaser, Steven D.

    2008-01-01T23:59:59.000Z

    during hydraulic fracturing Moore and Glaser, in press JGR,press JGR, B – 2006JB004373 where m is the average hydraulichydraulic fracturing with water. Moore and Glaser, in press

  16. HYDRAULIC CEMENT PREPARATION FROM LURGI SPENT SHALE

    E-Print Network [OSTI]

    Mehta, P.K.

    2013-01-01T23:59:59.000Z

    hydraulic cement from spent oil shale," Vol. 10, No. 4, p.J. W. , "Colorado's primary oil shale resource for verticalSimulated effects of oil-shale development on the hydrology

  17. Advanced Technology for Railway Hydraulic Hazard Forecasting

    E-Print Network [OSTI]

    Huff, William Edward 1988-

    2012-12-05T23:59:59.000Z

    Page 1.1 Map of Total Railway Hydraulic Hazard Events from 1982-2011 ............ 2 1.2 90 mi Effective Radar Coverage for Reliable Rainfall Rate Determination ....................................................................... 5 3... Administration (FRA) for the period of 1982-2011. This data was compiled from the FRA Office of Safety Analysis website (FRA, 2011). A map of the railway hydraulic hazard events over the same time period is displayed in Figure 1.1. Table 1.1. U.S. Railway...

  18. Appendix A. Hydraulic Properties Statistics Tables Table A1. Hydraulic properties statistics for the alluvium (Stephens et al.).

    E-Print Network [OSTI]

    A-1 Appendix A. Hydraulic Properties Statistics Tables Table A1. Hydraulic properties statistics Deviation .1708 4.274 28.95 Harmonic Mean Number of Observations 9 8 8 2 2 2 2 2 Table A2. Hydraulic.3×10-5 Number of Observations 10 10 10 34 34 4 4 4 #12;A-2 Table A3. Hydraulic properties statistics

  19. P. Cruiziat et al.Hydraulic architecture of trees Hydraulic architecture of trees: main concepts and results

    E-Print Network [OSTI]

    Boyer, Edmond

    P. Cruiziat et al.Hydraulic architecture of trees Review Hydraulic architecture of trees: main March 2001; accepted 13 February 2002) Abstract ­ Since about twenty years, hydraulic architecture (h. This review encompasses the main concepts and results concerning the hydraulic of architecture of trees. After

  20. Hydraulic multistage turbine of turbodrill

    SciTech Connect (OSTI)

    Brudny-Chelyadinov, S.J.; Budyansky, V.S.; Filimonov, V.A.

    1987-06-30T23:59:59.000Z

    This patent describes a turbodrill provided with a rock destruction tool for drilling wells, a hydraulic turbine for driving the rock destruction tool under the action of a drilling fluid, comprising: identical stages formed by one stator and one rotor; the stator of one stage; a spacing sleeve of the stator; a ring of the stator incorporating: a hub; a blading formed by a multitude of blades equally spaced on the inside of the hub of the stator ring; a rim secured to the blades at the tips away from the hub, and a flow channel for passing the drilling fluid arranged between the hub and the rim, and accommodating the blading; blades of the blading which, at least in a number of the stator rings from the plurality of stages, are made with an angle of curvature of the chamber line being greater than an acute angle formed by the tangent to this line at the exit of the blading and the axis of drilling fluid flow; the rotor of one state arranged coaxially with the stator; a spacing sleeve of the rotor; and a ring of the rotor.

  1. Parker Hybrid Hydraulic Drivetrain Demonstration

    SciTech Connect (OSTI)

    Collett, Raymond [Parker-Hannifin Corporation, Cleveland, OH (United States); Howland, James [Parker-Hannifin Corporation, Cleveland, OH (United States); Venkiteswaran, Prasad [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

    2014-03-31T23:59:59.000Z

    This report examines the benefits of Parker Hannifin hydraulic hybrid brake energy recovery systems used in commercial applications for vocational purposes. A detailed background on the problem statement being addressed as well as the solution set specific for parcel delivery will be provided. Objectives of the demonstration performed in high start & stop applications included opportunities in fuel usage reduction, emissions reduction, vehicle productivity, and vehicle maintenance. Completed findings during the demonstration period and parallel investigations with NREL, CALSTART, along with a literature review will be provided herein on this research area. Lastly, results identified in the study by third parties validated the savings potential in fuel reduction of on average of 19% to 52% over the baseline in terms of mpg (Lammert, 2014, p11), Parker data for parcel delivery vehicles in the field parallels this at a range of 35% - 50%, emissions reduction of 17.4% lower CO2 per mile and 30.4% lower NOx per mile (Gallo, 2014, p15), with maintenance improvement in the areas of brake and starter replacement, while leaving room for further study in the area of productivity in terms of specific metrics that can be applied and studied.

  2. Integrated PEV Charging Solutions and Reduced Energy for Occupant Comfort (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-01-01T23:59:59.000Z

    Brochure on Vehicle Testing and Integration Facility, featuring the Vehicle Modification Facility, Vehicle Test Pad and ReCharge Integrated Demonstration System. Plug-in electric vehicles (PEVs) offer the opportunity to shift transportation energy demands from petroleum to electricity, but broad adoption will require integration with other systems. While automotive experts work to reduce the cost of PEVs, fossil fueled cars and trucks continue to burn hundreds of billions of gallons of petroleum each year - not only to get from point A to point B, but also to keep passengers comfortable with air conditioning and heat. At the National Renewable Energy Laboratory (NREL), three installations form a research laboratory known as the Vehicle Testing and Integration Facility (VTIF). At the VTIF, engineers are developing strategies to address two separate but equally crucial areas of research: meeting the demands of electric vehicle-grid integration and minimizing fuel consumption related to vehicle climate control. Part of NREL's Center for Transportation Technologies and Systems (CTTS), the VTIF is dedicated to renewable and energy efficient solutions. This facility showcases technology and systems designed to increase the viability of sustainably powered vehicles. NREL researchers instrument every class of on-road vehicle, conduct hardware and software validation for electric vehicle (EV) components and accessories, and develop analysis tools and technology for the Department of Energy, other government agencies and industry partners. Research conducted at the VTIF examines the interaction of building energy systems, utility grids, renewable energy sources and PEVs, integrating energy management solutions, and maximizing potential greenhouse gas (GHG) reduction, while smoothing the transition and reducing costs for EV owners. NREL's collaboration with automakers, charging station manufacturers, utilities and fleet operators to assess technologies using VTIF resources is designed to enable PEV communication with the smart grid and create opportunities for vehicles to play an active role in building and grid management. Ultimately, this creates value for the vehicle owner and will help renewables be deployed faster and more economically, making the U.S. transportation sector more flexible and sustainable.

  3. The Political History of Hydraulic Fracturing’s Expansion Across the West

    E-Print Network [OSTI]

    Forbis, Robert E.

    2014-01-01T23:59:59.000Z

    Political History of Hydraulic Fracturing’s Expansion AcrossPolitical History of Hydraulic Fracturing’s Expansion Acrosss use of the hydraulic fracturing development process.

  4. Acoustic Emission in a Fluid Saturated Hetergeneous Porous Layer with Application to Hydraulic Fracture

    E-Print Network [OSTI]

    Nelson, J.T.

    2009-01-01T23:59:59.000Z

    responses during hydraulic fracturing, and aid developmentFracture Monitoring Hydraulic fracturing is a method forfluids" used for hydraulic fracturing, the above frequencies

  5. HYDRAULIC FRACTURING AND OVERCORING STRESS MEASUREMENTS IN A DEEP BOREHOLE AT THE STRIPA TEST MINE, SWEDEN

    E-Print Network [OSTI]

    Doe, T.

    2010-01-01T23:59:59.000Z

    u l y 2 , 1 9 8 1 HYDRAULIC FRACTURING AND OVERCORING STRESSI nun LBL-12478 HYDRAULIC FRACTURING AND OVERCORING STRESSthe calculated stress. n HYDRAULIC FRACTURING EQUIPMENT AND

  6. International Conference on Nuclear Thermal Hydraulics, Operations and Safety (NUTHOS-6) Nara, Japan, October 4-8, 2004.

    E-Print Network [OSTI]

    The 6th International Conference on Nuclear Thermal Hydraulics, Operations and Safety (NUTHOS-6 Junbeom Yoo, Suhyun Park, Hojung Bang, Taihyo Kim, Sungdeok Cha Korea Advanced Institute of Science for assuring quality of software. In the area of nuclear power plant control systems, testing on software

  7. Advanced Hydraulic Fracturing Technology for Unconventional Tight Gas Reservoirs

    SciTech Connect (OSTI)

    Stephen Holditch; A. Daniel Hill; D. Zhu

    2007-06-19T23:59:59.000Z

    The objectives of this project are to develop and test new techniques for creating extensive, conductive hydraulic fractures in unconventional tight gas reservoirs by statistically assessing the productivity achieved in hundreds of field treatments with a variety of current fracturing practices ranging from 'water fracs' to conventional gel fracture treatments; by laboratory measurements of the conductivity created with high rate proppant fracturing using an entirely new conductivity test - the 'dynamic fracture conductivity test'; and by developing design models to implement the optimal fracture treatments determined from the field assessment and the laboratory measurements. One of the tasks of this project is to create an 'advisor' or expert system for completion, production and stimulation of tight gas reservoirs. A central part of this study is an extensive survey of the productivity of hundreds of tight gas wells that have been hydraulically fractured. We have been doing an extensive literature search of the SPE eLibrary, DOE, Gas Technology Institute (GTI), Bureau of Economic Geology and IHS Energy, for publicly available technical reports about procedures of drilling, completion and production of the tight gas wells. We have downloaded numerous papers and read and summarized the information to build a database that will contain field treatment data, organized by geographic location, and hydraulic fracture treatment design data, organized by the treatment type. We have conducted experimental study on 'dynamic fracture conductivity' created when proppant slurries are pumped into hydraulic fractures in tight gas sands. Unlike conventional fracture conductivity tests in which proppant is loaded into the fracture artificially; we pump proppant/frac fluid slurries into a fracture cell, dynamically placing the proppant just as it occurs in the field. From such tests, we expect to gain new insights into some of the critical issues in tight gas fracturing, in particular the roles of gel damage, polymer loading (water-frac versus gel frac), and proppant concentration on the created fracture conductivity. To achieve this objective, we have designed the experimental apparatus to conduct the dynamic fracture conductivity tests. The experimental apparatus has been built and some preliminary tests have been conducted to test the apparatus.

  8. Universal asymptotic umbrella for hydraulic fracture modeling

    E-Print Network [OSTI]

    Linkov, Aleksandr M

    2014-01-01T23:59:59.000Z

    The paper presents universal asymptotic solution needed for efficient modeling of hydraulic fractures. We show that when neglecting the lag, there is universal asymptotic equation for the near-front opening. It appears that apart from the mechanical properties of fluid and rock, the asymptotic opening depends merely on the local speed of fracture propagation. This implies that, on one hand, the global problem is ill-posed, when trying to solve it as a boundary value problem under a fixed position of the front. On the other hand, when properly used, the universal asymptotics drastically facilitates solving hydraulic fracture problems (both analytically and numerically). We derive simple universal asymptotics and comment on their employment for efficient numerical simulation of hydraulic fractures, in particular, by well-established Level Set and Fast Marching Methods.

  9. Hydraulic dredging, a sediment removal technique

    SciTech Connect (OSTI)

    Spotts, J.W.

    1980-12-01T23:59:59.000Z

    Sediment was successfully removed from a Peabody Coal Company pond near Macon, Missouri, by a Mud Cat Model SP-810 hydraulic dredge. Previous attempts using land-based equipment had been unsatisfactory. The hydraulic-powered auger and submerged pump easily removed 882 m/sup 3/ (1154 yd/sup 3/) and pumped the slurry a distance of 305 m (1000 ft) to a disposal area. The hydraulic dredge was more effective and cheaper to operate than land-based equipment. The dredge cost was $1.31/m/sup 3/ ($1.00/yd/sup 3/), the dragline cost was $6.54/m/sup 3/ ($5.00/yd/sup 3/) and the front-end loader cost was $15.70/m/sup 3/ ($12.00/yd/sup 3/), under optimum conditions.

  10. The hydraulic jump as a white hole

    E-Print Network [OSTI]

    G. E. Volovik

    2005-10-21T23:59:59.000Z

    In the geometry of the circular hydraulic jump, the velocity of the liquid in the interior region exceeds the speed of capillary-gravity waves (ripplons), whose spectrum is `relativistic' in the shallow water limit. The velocity flow is radial and outward, and thus the relativistic ripplons cannot propagating into the interior region. In terms of the effective 2+1 dimensional Painleve-Gullstrand metric appropriate for the propagating ripplons, the interior region imitates the white hole. The hydraulic jump represents the physical singularity at the white-hole horizon. The instability of the vacuum in the ergoregion inside the circular hydraulic jump and its observation in recent experiments on superfluid 4He by E. Rolley, C. Guthmann, M.S. Pettersen and C. Chevallier in physics/0508200 are discussed.

  11. Hydraulic Interaction between Geosynthetic Drainage Layers and Unsaturated Low Plasticity Clay

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    1 Hydraulic Interaction between Geosynthetic Drainage Layers and Unsaturated Low Plasticity Clay of soil density on the hydraulic interaction between unsaturated, low plasticity clay and geosynthetic drainage layers. The hydraulic interaction was evaluated using the system hydraulic conductivity, moisture

  12. PARTITIONED ANALYSIS FOR DIMENSIONALLY-HETEROGENEOUS HYDRAULIC NETWORKS*

    E-Print Network [OSTI]

    Buscaglia, Gustavo C.

    PARTITIONED ANALYSIS FOR DIMENSIONALLY-HETEROGENEOUS HYDRAULIC NETWORKS* JORGE S. LEIVA , PABLO J for which this procedure is envisaged arises when modeling hydraulic networks in which complex and simple

  13. Simulation of Hydraulic Fractures and their Interactions with Natural Fractures

    E-Print Network [OSTI]

    Sesetty, Varahanaresh

    2012-10-19T23:59:59.000Z

    Modeling the stimulated reservoir volume during hydraulic fracturing is important to geothermal and petroleum reservoir stimulation. The interaction between a hydraulic fracture and pre-existing natural fractures exerts significant control...

  14. Effectiveness of microseismic monitoring for optimizing hydraulic fracturing in California

    E-Print Network [OSTI]

    Alampi, Ann M

    2014-01-01T23:59:59.000Z

    Hydraulic fracturing has fundamentally changed the oil and gas industry in the past 10 years. Bakersfield, California provides a unique case study because steam injection, a type of hydraulic fracturing, has been used there ...

  15. Marcellus Shale Drilling and Hydraulic Fracturing; Technicalities and

    E-Print Network [OSTI]

    Jiang, Huiqiang

    Pipe · Air Rotary Drilling Rig · Hydraulic Rotary Drilling Rig ­ Barite/Bentonite infused drilling muds

  16. Vehicle hydraulic system that provides heat for passenger compartment

    DOE Patents [OSTI]

    Bartley, Bradley E. (Manito, IL); Blass, James R. (Bloomington, IL); Gibson, Dennis H. (Chillicothe, IL)

    2001-01-01T23:59:59.000Z

    A vehicle includes a vehicle housing which defines a passenger compartment. Attached to the vehicle housing is a hydraulic system, that includes a hydraulic fluid which flows through at least one passageway within the hydraulic system. Also attached to the vehicle housing is a passenger compartment heating system. The passenger compartment heating system includes a heat exchanger, wherein a portion of the heat exchanger is a segment of the at least one passageway of the hydraulic system.

  17. Proceedings of the OECD/CSNI workshop on transient thermal-hydraulic and neutronic codes requirements

    SciTech Connect (OSTI)

    Ebert, D.

    1997-07-01T23:59:59.000Z

    This is a report on the CSNI Workshop on Transient Thermal-Hydraulic and Neutronic Codes Requirements held at Annapolis, Maryland, USA November 5-8, 1996. This experts` meeting consisted of 140 participants from 21 countries; 65 invited papers were presented. The meeting was divided into five areas: (1) current and prospective plans of thermal hydraulic codes development; (2) current and anticipated uses of thermal-hydraulic codes; (3) advances in modeling of thermal-hydraulic phenomena and associated additional experimental needs; (4) numerical methods in multi-phase flows; and (5) programming language, code architectures and user interfaces. The workshop consensus identified the following important action items to be addressed by the international community in order to maintain and improve the calculational capability: (a) preserve current code expertise and institutional memory, (b) preserve the ability to use the existing investment in plant transient analysis codes, (c) maintain essential experimental capabilities, (d) develop advanced measurement capabilities to support future code validation work, (e) integrate existing analytical capabilities so as to improve performance and reduce operating costs, (f) exploit the proven advances in code architecture, numerics, graphical user interfaces, and modularization in order to improve code performance and scrutibility, and (g) more effectively utilize user experience in modifying and improving the codes.

  18. Coupling schemes for modeling hydraulic fracture propagation using the XFEM

    E-Print Network [OSTI]

    Peirce, Anthony

    Coupling schemes for modeling hydraulic fracture propagation using the XFEM Elizaveta Gordeliy of hydraulic fractures in an elastic medium. With appropriate enrichment, the XFEM resolves the Neumann(h) accuracy. For hydraulic fracture problems with a lag separating the uid front from the fracture front, we

  19. Role of seepage forces on hydraulic fracturing and failure patterns

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Role of seepage forces on hydraulic fracturing and failure patterns Alexander Rozhko Thesis September 2007 #12;ii Role of seepage forces on hydraulic fracturing and failure patterns Abstract. The mechanical role of seepage forces on hydraulic fracturing and failure patterns was studied both

  20. Control of a Hydraulically-Powered, Differential Lift Project Proposal

    E-Print Network [OSTI]

    Control of a Hydraulically-Powered, Differential Lift Project Proposal Written by Thomas Johnson ME6401: Linear Control Submitted to Dr. Wayne Book 9/11/06 #12;A hydraulically-powered, differential lift representation of a differential lift can be viewed in Figure 1. Figure 1. Hydraulically-powered, differential

  1. Viscous Undular Hydraulic Jumps of Moderate Reynolds number

    E-Print Network [OSTI]

    Shyamasundar, R.K.

    Viscous Undular Hydraulic Jumps of Moderate Reynolds number Ratul Dasgupta I will present some results on undular hydraulic jumps occurring in a two bores (in rivers), where the interface remains horizontal, the moderate Reynolds hydraulic jump shows a linear increase in height due to viscosity

  2. Reply to Davies: Hydraulic fracturing remains a possible mechanism for

    E-Print Network [OSTI]

    Jackson, Robert B.

    LETTER Reply to Davies: Hydraulic fracturing remains a possible mechanism for observed methane in aquifers overlying the Marcellus formation but asserts that we prematurely ascribed its cause to hydraulic mechanisms were leaky gas well casings and the possibility that hydraulic fracturing might generate new

  3. A COUPLED HYDRAULIC AND ELECTRICAL STRESS DETERMINATION TECHNIQUE

    E-Print Network [OSTI]

    A COUPLED HYDRAULIC AND ELECTRICAL STRESS DETERMINATION TECHNIQUE Mai Linh DOAN Département de Alps. The Hydraulic Tests on Preexisting Fractures (HTPF) method was chosen for it provides means to determine the complete stress tensor. The campaign was performed with a specific probe, coupling hydraulic

  4. System Identification and Modelling of a High Performance Hydraulic Actuator

    E-Print Network [OSTI]

    Hayward, Vincent

    System Identification and Modelling of a High Performance Hydraulic Actuator Benoit Boulet, Laeeque with the experimental identification and modelling of the nonlinear dynamics ofa high performance hydraulic actuator. The actuator properties and performance are also discussed. 1 Introduction Hydraulic actuation used to be

  5. Evaluation of Hydraulic Efficiency of Disinfection Systems Based on

    E-Print Network [OSTI]

    Evaluation of Hydraulic Efficiency of Disinfection Systems Based on Residence Time Distribution. Accepted November 9, 2010. Hydraulic efficiency is a vital component in evaluating the disinfection to overestimate, severely in some instances, the actual hydraulic efficiency as obtained from the system's flow

  6. HYDRAULIC STIMULATION OF NATURAL FRACTURES AS REVEALED BY INDUCED MICROEARTHQUAKES,

    E-Print Network [OSTI]

    -1- HYDRAULIC STIMULATION OF NATURAL FRACTURES AS REVEALED BY INDUCED MICROEARTHQUAKES, CARTHAGE, December, 2001 Manuscript # 01066 LAUR# 01-1204 #12;Hydraulic Stimulation of Natural Fractures -2- ABSTRACT We have produced a high-resolution microseismic image of a hydraulic fracture stimulation

  7. Unsaturated hydraulic conductivity function based on a soil fragmentation process

    E-Print Network [OSTI]

    Tartakovsky, Daniel M.

    Unsaturated hydraulic conductivity function based on a soil fragmentation process Shmuel Assouline-parameter expression for relative hydraulic conductivity (RHC) of partially saturated soils. It is based on the premise. This assumption allows us to derive hydraulic properties of soils (water retention curves and unsaturated

  8. Efficiency Mapping for a Linear Hydraulic-Actuator

    E-Print Network [OSTI]

    Manring, Noah D.

    Efficiency Mapping for a Linear Hydraulic-Actuator Noah D. Manring Mechanical and Aerospace at generating an efficiency map for a linear hydraulic-actuator that is controlled using an open-centered 4- way- ing the efficiency improvements that may be gained for linear hydraulic-actuators that use this type

  9. ORIGINAL PAPER Hydraulic properties and embolism in small-diameter

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ORIGINAL PAPER Hydraulic properties and embolism in small-diameter roots of five temperate broad & Context It has been estimated that about half of a plant's total hydraulic resistance is located belowground, but it is not well known how temperate tree species differ in root hydraulic properties and how

  10. Modeling Turbulent Hydraulic Fracture Near a Free Surface

    E-Print Network [OSTI]

    Modeling Turbulent Hydraulic Fracture Near a Free Surface Victor C. Tsai Seismological Laboratory consider a hydraulic fracture problem in which the crack grows parallel to a free surface, subject to fully components. wall Wall shear stress. ^· Non-dimensionalized ·. 1 Introduction Hydraulic fracture has been

  11. Weakly dispersive hydraulic flows in a contraction --Nonlinear stability analysis

    E-Print Network [OSTI]

    Ee, Bernard Kuowei

    Weakly dispersive hydraulic flows in a contraction -- Nonlinear stability analysis Bernard K. Ee hydraulic solutions of the forced Korteweg de-Vries equation is investigated here. For numerical convenience is destabilized by a hydraulic instability in which superexponential growth occurs prior to satura- tion

  12. Original article Hydraulic conductance of two co-occuring neotropical

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Original article Hydraulic conductance of two co-occuring neotropical understory shrubs December 1999) Abstract ­ Whole plant hydraulic conductance was measured for two co-occuring neotropical hydraulic con- ductance and leaf specific conducance in the drought-avoiding species, P. trigonum, than

  13. Modeling Turbulent Hydraulic Fracture Near a Free Surface

    E-Print Network [OSTI]

    Modeling Turbulent Hydraulic Fracture Near a Free Surface Victor C. Tsai Seismological Laboratory consider a hydraulic fracture problem in which the crack grows parallel to a free surface, subject to fully components. ^· Non-dimensionalized ·. 1 Introduction Hydraulic fracture has been studied for many years

  14. Hydraulic Wind Power Transfer Technology Afshin Izadian

    E-Print Network [OSTI]

    Zhou, Yaoqi

    Hydraulic Wind Power Transfer Technology Afshin Izadian Purdue School of Engineering and Technology of renewable energy tax credits in general and a gap in wind energy breakthroughs in particular have caused high cost of wind energy and technological dependency on countries such as China and Germany. Reducing

  15. March 24, 1999 Hydraulics, CIET 3132

    E-Print Network [OSTI]

    Bowen, James D.

    Test No. 2 March 24, 1999 Hydraulics, CIET 3132 Spring 1999, Bowen Page 1jdb_260.wpd Test Format in Closed Conduits (32 points) Water runs from an upper reservoir, through a turbine, to a lower reservoir, as shown below. Assuming the turbine is 80% efficient in converting the water power to mechanical power

  16. John Day Tailrace MASS2 Hydraulic Modeling

    SciTech Connect (OSTI)

    Rakowski, Cynthia L.; Richmond, Marshall C.

    2003-06-03T23:59:59.000Z

    Recent biological results for the Juvenile Bypass System at John Jay Lock and Dam have raised concerns about the hydraulic conditions that are created in the tailrace under different project operations. This Memorandum for Record discusses the development and application of a truncated MASS2 model in the John Day tailrace.

  17. Constructing Hydraulic Barriers in Deep Geologic Formations

    SciTech Connect (OSTI)

    Carter, E.E.; Carter, P.E. [Technologies Co, Texas (United States); Cooper, D.C. [Ph.D. Idaho National Laboratory, Idaho Falls, ID (United States)

    2008-07-01T23:59:59.000Z

    Many construction methods have been developed to create hydraulic barriers to depths of 30 to 50 meters, but few have been proposed for depths on the order of 500 meters. For these deep hydraulic barriers, most methods are potentially feasible for soil but not for hard rock. In the course of researching methods of isolating large subterranean blocks of oil shale, the authors have developed a wax thermal permeation method for constructing hydraulic barriers in rock to depths of over 500 meters in competent or even fractured rock as well as soil. The technology is similar to freeze wall methods, but produces a permanent barrier; and is potentially applicable in both dry and water saturated formations. Like freeze wall barriers, the wax thermal permeation method utilizes a large number of vertical or horizontal boreholes around the perimeter to be contained. However, instead of cooling the boreholes, they are heated. After heating these boreholes, a specially formulated molten wax based grout is pumped into the boreholes where it seals fractures and also permeates radially outward to form a series of columns of wax-impregnated rock. Rows of overlapping columns can then form a durable hydraulic barrier. These barriers can also be angled above a geologic repository to help prevent influx of water due to atypical rainfall events. Applications of the technique to constructing containment structures around existing shallow waste burial sites and water shutoff for mining are also described. (authors)

  18. Quantitative supersonic flow visualization by hydraulic analogy

    E-Print Network [OSTI]

    Rani, Sarma Laxminarasimha

    1998-01-01T23:59:59.000Z

    The hydraulic analogy, which forms the basis for the phics. current investigation, can be used to study supersonic gas flows with great ease by means of a water table. As a result of the analogy, water heights in free surface water flow correspond...

  19. Hydraulically actuated fuel injector including a pilot operated spool valve assembly and hydraulic system using same

    DOE Patents [OSTI]

    Shafer, Scott F. (Morton, IL)

    2002-01-01T23:59:59.000Z

    The present invention relates to hydraulic systems including hydraulically actuated fuel injectors that have a pilot operated spool valve assembly. One class of hydraulically actuated fuel injectors includes a solenoid driven pilot valve that controls the initiation of the injection event. However, during cold start conditions, hydraulic fluid, typically engine lubricating oil, is particularly viscous and is often difficult to displace through the relatively small drain path that is defined past the pilot valve member. Because the spool valve typically responds slower than expected during cold start due to the difficulty in displacing the relatively viscous oil, accurate start of injection timing can be difficult to achieve. There also exists a greater difficulty in reaching the higher end of the cold operating speed range. Therefore, the present invention utilizes a fluid evacuation valve to aid in displacement of the relatively viscous oil during cold start conditions.

  20. Coordination of stem and leaf hydraulic conductance in southern California shrubs: a test of the hydraulic segmentation

    E-Print Network [OSTI]

    Sack, Lawren

    Coordination of stem and leaf hydraulic conductance in southern California shrubs: a test of the hydraulic segmentation hypothesis Alexandria L. Pivovaroff1 , Lawren Sack2 and Louis S. Santiago1 1 2014 New Phytologist (2014) 203: 842­850 doi: 10.1111/nph.12850 Key words: chaparral, hydraulic

  1. Abstract--Encouraged by previous performance of a hydraulic bed sensor, this work presents a new hydraulic transducer

    E-Print Network [OSTI]

    He, Zhihai "Henry"

    Abstract--Encouraged by previous performance of a hydraulic bed sensor, this work presents a new hydraulic transducer configuration which improves the system's ability to capture a heartbeat signal from. II.HYDRAULIC BED SENSOR A.Transducer construction The overall procedure and materials

  2. Financial Institutions

    Broader source: Energy.gov [DOE]

    A lending program begins with a financial institution that procures the funds they lend from a number of other sources.

  3. Interaction between Injection Points during Hydraulic Fracturing

    E-Print Network [OSTI]

    Hals, Kjetil M D

    2012-01-01T23:59:59.000Z

    We present a model of the hydraulic fracturing of heterogeneous poroelastic media. The formalism is an effective continuum model that captures the coupled dynamics of the fluid pressure and the fractured rock matrix and models both the tensile and shear failure of the rock. As an application of the formalism, we study the geomechanical stress interaction between two injection points during hydraulic fracturing (hydrofracking) and how this interaction influences the fracturing process. For injection points that are separated by less than a critical correlation length, we find that the fracturing process around each point is strongly correlated with the position of the neighboring point. The magnitude of the correlation length depends on the degree of heterogeneity of the rock and is on the order of 30-45 m for rocks with low permeabilities. In the strongly correlated regime, we predict a novel effective fracture-force that attracts the fractures toward the neighboring injection point.

  4. Hydraulic/Shock-Jumps in Protoplanetary Disks

    E-Print Network [OSTI]

    A. C. Boley; R. H. Durisen

    2006-03-10T23:59:59.000Z

    In this paper, we describe the nonlinear outcome of spiral shocks in protoplanetary disks. Spiral shocks, for most protoplanetary disk conditions, create a loss of vertical force balance in the post-shock region and result in rapid expansion of the gas perpendicular to the disk midplane. This expansion has characteristics similar to hydraulic jumps, which occur in incompressible fluids. We present a theory to describe the behavior of these hybrids between shocks and hydraulic jumps (shock bores) and then compare the theory to three-dimensional hydrodynamics simulations. We discuss the fully three-dimensional shock structures that shock bores produce and discuss possible consequences for disk mixing, turbulence, and evolution of solids.

  5. A Model For Polygonal Hydraulic Jumps

    E-Print Network [OSTI]

    Martens, Erik A; Bohr, Tomas

    2011-01-01T23:59:59.000Z

    We propose a phenomenological model for the polygonal hydraulic jumps discovered by Ellegaard et al., based on the known flow structure for the type II hydraulic jumps with a "roller" (separation eddy) near the free surface in the jump region. The model consists of mass conservation and radial force balance between hydrostatic pressure and viscous stresses on the roller surface. In addition, we consider the azimuthal force balance, primarily between pressure and viscosity, but also including non-hydrostatic pressure contributions from surface tension in light of recent observations by Bush et al. The model can be analyzed by linearization around the circular state, resulting in a parameter relationship for nearly circular polygonal states. A truncated, but fully nonlinear version of the model can be solved analytically. This simpler model gives rise to polygonal shapes that are very similar to those observed in experiments, even though surface tension is neglected, and the condition for the existence of a pol...

  6. Hydraulic fracturing slurry transport in horizontal pipes

    SciTech Connect (OSTI)

    Shah, S.N.; Lord, D.L. (Halliburton Services (US))

    1990-09-01T23:59:59.000Z

    Horizontal-well activity has increased throughout the industry in the past few years. To design a successful hydraulic fracturing treatment for horizontal wells, accurate information on the transport properties of slurry in horizontal pipe is required. Limited information exists that can be used to estimate critical deposition and resuspension velocities when proppants are transported in horizontal wells with non-Newtonian fracturing gels. This paper presents a study of transport properties of various hydraulic fracturing slurries in horizontal pipes. Flow data are gathered in three transparent horizontal pipes with different diameters. Linear and crosslinked fracturing gels were studied, and the effects of variables--e.g., pipe size; polymer-gelling-agent concentration; fluid rheological properties; crosslinking effects; proppant size, density, and concentrations; fluid density; and slurry pump rate--on critical deposition and resuspension velocities were investigated. Also, equations to estimate the critical deposition and resuspension velocities of fracturing gels are provided.

  7. Hydraulic system for a ratio change transmission

    DOE Patents [OSTI]

    Kalns, Ilmars (Northville, MI)

    1981-01-01T23:59:59.000Z

    Disclosed is a drive assembly (10) for an electrically powered vehicle (12). The assembly includes a transaxle (16) having a two-speed transmission (40) and a drive axle differential (46) disposed in a unitary housing assembly (38), an oil-cooled prime mover or electric motor (14) for driving the transmission input shaft (42), an adapter assembly (24) for supporting the prime mover on the transaxle housing assembly, and a hydraulic system (172) providing pressurized oil flow for cooling and lubricating the electric motor and transaxle and for operating a clutch (84) and a brake (86) in the transmission to shift between the two-speed ratios of the transmission. The adapter assembly allows the prime mover to be supported in several positions on the transaxle housing. The brake is spring-applied and locks the transmission in its low-speed ratio should the hydraulic system fail. The hydraulic system pump is driven by an electric motor (212) independent of the prime mover and transaxle.

  8. Institute for Atom-Efficient Chemical Transformations Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    biofuels, transportation, energy efficiency, electricity storage and transmission, clean coal and carbon capture and sequestration, and nuclear energy. EFRC Brochure (PDF 1.7MB...

  9. Derivation of site-specific relationships between hydraulic parameters and p-wave velocities based on hydraulic and seismic tomography

    SciTech Connect (OSTI)

    Brauchler, R.; Doetsch, J.; Dietrich, P.; Sauter, M.

    2012-01-10T23:59:59.000Z

    In this study, hydraulic and seismic tomographic measurements were used to derive a site-specific relationship between the geophysical parameter p-wave velocity and the hydraulic parameters, diffusivity and specific storage. Our field study includes diffusivity tomograms derived from hydraulic travel time tomography, specific storage tomograms, derived from hydraulic attenuation tomography, and p-wave velocity tomograms, derived from seismic tomography. The tomographic inversion was performed in all three cases with the SIRT (Simultaneous Iterative Reconstruction Technique) algorithm, using a ray tracing technique with curved trajectories. The experimental set-up was designed such that the p-wave velocity tomogram overlaps the hydraulic tomograms by half. The experiments were performed at a wellcharacterized sand and gravel aquifer, located in the Leine River valley near Göttingen, Germany. Access to the shallow subsurface was provided by direct-push technology. The high spatial resolution of hydraulic and seismic tomography was exploited to derive representative site-specific relationships between the hydraulic and geophysical parameters, based on the area where geophysical and hydraulic tests were performed. The transformation of the p-wave velocities into hydraulic properties was undertaken using a k-means cluster analysis. Results demonstrate that the combination of hydraulic and geophysical tomographic data is a promising approach to improve hydrogeophysical site characterization.

  10. Downstream hydraulic geometry relations: 2. Calibration and testing

    E-Print Network [OSTI]

    Singh, Vijay P.; Yang, Chih Ted; Deng, Zhi-Qiang

    2003-12-04T23:59:59.000Z

    Downstream hydraulic geometry relations: 2. Calibration and testing Vijay P. Singh Department of Civil and Environmental Engineering, Louisiana State University, Baton Rouge, Louisiana, USA Chih Ted Yang 1 Department of Civil Engineering, Colorado...; KEYWORDS: dynamic equilibrium, hydraulic geometry, maximum entropy, minimum energy dissipation, regime equations, stream power Citation: Singh, V. P., C. T. Yang, and Z.-Q. Deng, Downstream hydraulic geometry relations: 2. Calibration and testing, Water...

  11. Uncertainty in the maximum principal stress estimated from hydraulic fracturing Measurements due to the presence of the induced fracture

    E-Print Network [OSTI]

    Rutqvist, Jonny; Tsang, Chin-fu; Stephansson, Ove

    2000-01-01T23:59:59.000Z

    reopening during hydraulic fracturing stress determinations.Laboratory study of hydraulic fracturing pressure data?Howevaluation of hydraulic fracturing stress measurement

  12. Integrated Thermal and Hydraulic Analysis of Distillation Columns

    E-Print Network [OSTI]

    Samant, K.; Sinclair, I.; Keady, G.

    . The paper outlines how bringing together the column thermal and hydraulics analysis provides significant additional insights to help screen the options for distillation column revamps....

  13. Hydraulically refueled battery employing a packed bed metal particle electrode

    DOE Patents [OSTI]

    Siu, S.C.; Evans, J.W.

    1998-12-15T23:59:59.000Z

    A secondary zinc air cell, or another selected metal air cell, employing a spouted/packed metal particle bed and an air electrode is described. More specifically, two embodiments of a cell, one that is capable of being hydraulically recharged, and a second that is capable of being either hydraulically or electrically recharged. Additionally, each cell includes a sloped bottom portion to cause stirring of the electrolyte/metal particulate slurry when the cell is being hydraulically emptied and refilled during hydraulically recharging of the cell. 15 figs.

  14. MICRO-SEISMICITY, FAULT STRUCTURE AND HYDRAULIC COMPARTMENTALIZATION...

    Open Energy Info (EERE)

    GETHERMAL FIELD, CALIFORNIA Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: MICRO-SEISMICITY, FAULT STRUCTURE AND HYDRAULIC...

  15. Hydraulic "Fracking": Are Surface Water Impacts An Ecological Concern?

    E-Print Network [OSTI]

    Hydraulic "Fracking": Are Surface Water Impacts An Ecological Concern? G. Allen Burton Jr; Fracking; Water-quality stressor; Ecological risk assessment Introduction The world's energy marketplace

  16. ROC/RMOTC Hydraulic Pump Test Final Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    never attained. 6. The pump was hydraulically deployed and retrieved successfully. 7. Corrosion andor erosion of the pump rod were found when the pump was inspected following...

  17. Hydraulic properties of adsorbed water films in unsaturated porous media

    SciTech Connect (OSTI)

    Tokunaga, Tetsu K.

    2009-03-01T23:59:59.000Z

    Adsorbed water films strongly influence residual water saturations and hydraulic conductivities in porous media at low saturations. Hydraulic properties of adsorbed water films in unsaturated porous media were investigated through combining Langmuir's film model with scaling analysis, without use of any adjustable parameters. Diffuse double layer influences are predicted to be important through the strong dependence of adsorbed water film thickness (f) on matric potential ({Psi}) and ion charge (z). Film thickness, film velocity, and unsaturated hydraulic conductivity are predicted to vary with z{sup -1}, z{sup -2}, and z{sup -3}, respectively. In monodisperse granular media, the characteristic grain size ({lambda}) controls film hydraulics through {lambda}{sup -1} scaling of (1) the perimeter length per unit cross sectional area over which films occur, (2) the critical matric potential ({Psi}{sub c}) below which films control flow, and (3) the magnitude of the unsaturated hydraulic conductivity when {Psi} < {Psi}{sub c}. While it is recognized that finer textured sediments have higher unsaturated hydraulic conductivities than coarser sands at intermediate {Psi}, the {lambda}{sup -1} scaling of hydraulic conductivity predicted here extends this understanding to very low saturations where all pores are drained. Extremely low unsaturated hydraulic conductivities are predicted under adsorbed film-controlled conditions (generally < 0.1 mm y{sup -1}). On flat surfaces, the film hydraulic diffusivity is shown to be constant (invariant with respect to {Psi}).

  18. Compact, electro-hydraulic, variable valve actuation system providing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compact, electro-hydraulic, variable valve actuation system providing variable lift, timing and duration to enable high efficiency engine combustion control Compact,...

  19. Thermal Hydraulic Modeling: Cross-Verification, Validation and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aleks Obabko, Paul Fischer, and Tim Tautges, Argonne National Laboratory Thermal Hydraulic Modeling: Cross-Verification, Validation and Co-design PI Name: Paul F. Fischer PI...

  20. 1112323-danimer-abstract-hydraulic-fractures | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Oil Recovery Deepwater Tech Methane Hydrate Field Demo of Eco-Friendly Propped Hydraulic Fractures 11123-23 Primary Performer DaniMer Scientific, LLC (Bainbridge, GA)...

  1. adopted hydraulic retention: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Concern? Geosciences Websites Summary: Hydraulic "Fracking": Are Surface Water Impacts An Ecological Concern? G. Allen Burton Jr shale formations. Millions of liters of...

  2. advanced hydraulic studies: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Concern? Geosciences Websites Summary: Hydraulic "Fracking": Are Surface Water Impacts An Ecological Concern? G. Allen Burton Jr shale formations. Millions of liters of...

  3. asymmetric hydraulic fracture: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from the fractured shale 17 RPSEA UNCONVENTIONAL GAS CONFERENCE 2012: Geology, the Environment, Hydraulic Fracturing Engineering Websites Summary: Fracturing Experiment Overview...

  4. advanced hydraulic fracturing: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from the fractured shale 18 RPSEA UNCONVENTIONAL GAS CONFERENCE 2012: Geology, the Environment, Hydraulic Fracturing Engineering Websites Summary: Fracturing Experiment Overview...

  5. assembly thermo hydraulic: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Concern? Geosciences Websites Summary: Hydraulic "Fracking": Are Surface Water Impacts An Ecological Concern? G. Allen Burton Jr shale formations. Millions of liters of...

  6. advanced thermal hydraulic: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Concern? Geosciences Websites Summary: Hydraulic "Fracking": Are Surface Water Impacts An Ecological Concern? G. Allen Burton Jr shale formations. Millions of liters of...

  7. Finite element modeling of hydraulic fracturing in 3D

    E-Print Network [OSTI]

    2013-03-22T23:59:59.000Z

    Mar 22, 2013 ... Gautier. A.. Touzelet. S.: Tracer testing of the geothermal heat ex- ... R.: A field demonstra- tion of hydraulic fracturing for solid waste diposal—.

  8. Hydraulically refueled battery employing a packed bed metal particle electrode

    DOE Patents [OSTI]

    Siu, Stanley C. (Castro Valley, CA); Evans, James W. (Piedmont, CA)

    1998-01-01T23:59:59.000Z

    A secondary zinc air cell, or another selected metal air cell, employing a spouted/packed metal particle bed and an air electrode. More specifically, two embodiments of a cell, one that is capable of being hydraulically recharged, and a second that is capable of being either hydraulically or electrically recharged. Additionally, each cell includes a sloped bottom portion to cause stirring of the electrolyte/metal particulate slurry when the cell is being hydraulically emptied and refilled during hydraulically recharging of the cell.

  9. International Topical Meeting on Nuclear Thermal-Hydraulics, Operation and Safety (NUTHOS-9) N9P0302 Kaohsiung, Taiwan, September 9-13, 2012

    E-Print Network [OSTI]

    Haviland, David

    The 9th International Topical Meeting on Nuclear Thermal-Hydraulics, Operation and Safety (NUTHOS-9 Kudinov Division of Nuclear Power Safety, Royal Institute of Technology (KTH), Roslagstullsbacken 21, SE proportional to terminal melt spread thickness. At certain thickness, the melt layer becomes non

  10. UK Oil and Gas Collaborative Doctoral Training Centre (2014 start) Project Title: Coupled flow of water and gas during hydraulic fracture in shale (EARTH-15-CM1)

    E-Print Network [OSTI]

    Henderson, Gideon

    UK Oil and Gas Collaborative Doctoral Training Centre (2014 start) Project Title: Coupled flow of water and gas during hydraulic fracture in shale (EARTH-15-CM1) Host institution: University of Oxford Cartwright Project description: Recovery of natural gas from mudstone (shale) formations has triggered

  11. Downstream hydraulic geometry relations: 1. Theoretical development

    E-Print Network [OSTI]

    Singh, Vijay P.; Yang, Chih Ted; Deng, Z. Q.

    2003-12-04T23:59:59.000Z

    . Thus USP, denoted as P w , is expressed as P w ? VS ?3a? where V is the average flow velocity, and S is the energy slope. Stream power (SP) is the rate of energy dissipation due to water: SP ? QgS ?3b? where g is the weight density of water and Q... of flow and B as the width of flow, then the flow cross-sectional area A= Bh, the wetted perimeter P= B + 2h, and the hydraulic radius R = A/P = (Bh)/(B + 2h). If the channel is wide rectangular, then R ? h = depth of flow. The flow discharge in equation...

  12. Hydraulic Hybrid Systems | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtel JumpCounty, Texas: EnergyHy9 CorporationHydra Fuel CellHydraulic

  13. Thermal Hydraulic Simulations, Error Estimation and Parameter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in theTheoretical Study onThermal Hydraulic Simulations,

  14. Hydraulic Fracturing | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup | OpenHunan Runhua New Energy Development CoHustisfordHydraulic

  15. Formed Core Sampler Hydraulic Conductivity Testing

    SciTech Connect (OSTI)

    Miller, D. H.; Reigel, M. M.

    2012-09-25T23:59:59.000Z

    A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

  16. HYDRAULIC AND PHYSICAL PROPERTIES OF MCU SALTSTONE

    SciTech Connect (OSTI)

    Dixon, K; Mark Phifer, M

    2008-03-19T23:59:59.000Z

    The Saltstone Disposal Facility (SDF), located in the Z-Area of the Savannah River Site (SRS), is used for the disposal of low-level radioactive salt solution. The SDF currently contains two vaults: Vault 1 (6 cells) and Vault 4 (12 cells). Additional disposal cells are currently in the design phase. The individual cells of the saltstone facility are filled with saltstone., Saltstone is produced by mixing the low-level radioactive salt solution, with blast furnace slag, fly ash, and cement or lime to form a dense, micro-porous, monolithic, low-level radioactive waste form. The saltstone is pumped into the disposal cells where it subsequently solidifies. Significant effort has been undertaken to accurately model the movement of water and contaminants through the facility. Key to this effort is an accurate understanding of the hydraulic and physical properties of the solidified saltstone. To date, limited testing has been conducted to characterize the saltstone. The primary focus of this task was to estimate the hydraulic and physical properties of MCU (Modular Caustic Side Solvent Extraction Unit) saltstone relative to two permeating fluids. These fluids included simulated groundwater equilibrated with vault concrete and simulated saltstone pore fluid. Samples of the MCU saltstone were prepared by the Savannah River National Laboratory (SRNL) and allowed to cure for twenty eight days prior to testing. These samples included two three-inch diameter by six inch long mold samples and three one-inch diameter by twelve inch long mold samples.

  17. Hydraulic conductivity estimation from induced polarisation data at the field scale --the Krauthausen case history

    E-Print Network [OSTI]

    Sailhac, Pascal

    Hydraulic conductivity estimation from induced polarisation data at the field scale Abstract Recently, encouraging results have been obtained to estimate hydraulic conductivity in order to establish semi-empirical relationships between complex electrical conductivity and hydraulic

  18. Passivity Based Adaptive Control of a Two Chamber Single Rod Hydraulic Actuator

    E-Print Network [OSTI]

    Li, Perry Y.

    Passivity Based Adaptive Control of a Two Chamber Single Rod Hydraulic Actuator Meng Wang and Perry based backstepping controller using a physical compressibility energy function for a chamber hydraulic produces an accurate trajectory tracking performance. I. INTRODUCTION Electronically controlled hydraulic

  19. Development of a Hydraulic Manipulator Servoactuator Model: Simulation and Experimental Validation

    E-Print Network [OSTI]

    Papadopoulos, Evangelos

    Development of a Hydraulic Manipulator Servoactuator Model: Simulation and Experimental Validation Abstract In this paper, modelling and identification of a hydraulic servoactuator system is presented, leakage, and load dynamics. System parameters are identified based on a high-performance hydraulic

  20. Hydraulic limitation not declining nitrogen availability causes the age-related photosynthetic decline in loblolly

    E-Print Network [OSTI]

    DeLucia, Evan H.

    Hydraulic limitation not declining nitrogen availability causes the age-related photosynthetic capacity and thus decreases GPP with increasing age; and (2) hydraulic limitations increasingly induce conservative with age. We conclude that hydraulic limitation increasingly limits the photosyn- thetic rates

  1. Hydraulic Fractures: multiscale phenomena, asymptotic and numerical solutions

    E-Print Network [OSTI]

    Peirce, Anthony

    Hydraulic Fractures: multiscale phenomena, asymptotic and numerical solutions SANUM Conference (UMN) Eduard Siebrits (SLB) #12;2 Outline · Examples of hydraulic fractures · Governing equations well stimulation Fracturing Fluid Proppant #12;5 Quarries #12;6 Magma flow Tarkastad #12;7 Model EQ 1

  2. Hydraulic Fractures: multiscale phenomena, asymptotic and numerical solutions

    E-Print Network [OSTI]

    Peirce, Anthony

    Hydraulic Fractures: multiscale phenomena, asymptotic and numerical solutions CSIRO CSS TCP Detournay (UMN) Eduard Siebrits (SLB) #12;2 Outline · Examples of hydraulic fractures · Governing equations well stimulation Fracturing Fluid Proppant #12;5 Quarries #12;6 Magma flow Tarkastad #12;7 Model EQ 1

  3. Creation and Impairment of Hydraulic Fracture Conductivity in Shale Formations 

    E-Print Network [OSTI]

    Zhang, Junjing

    2014-07-10T23:59:59.000Z

    Multi-stage hydraulic fracturing is the key to the success of many shale gas and shale oil reservoirs. The main objectives of hydraulic fracturing in shale are to create artificial fracture networks that are conductive for oil and gas flow...

  4. The Performance and Environmental Effects of a Hydraulic Clam Dredge

    E-Print Network [OSTI]

    The Performance and Environmental Effects of a Hydraulic Clam Dredge THOMAS L MEYER, RICHARD A to Nantucket, Mass. Hydraulic clam dredges with 0.76 m and 1.2 m (30 and 48 inch) wide blades were used during these surveys (Serchuk et aI., 1979). The efficiency of these dredges and the general effect of dredging

  5. Sustained Storage and Transport of Hydraulic Gold Mining Sediment

    E-Print Network [OSTI]

    James, L. Allan

    Sustained Storage and Transport of Hydraulic Gold Mining Sediment in the Bear River, California L primarily in the Yuba Basin. Sus- tained storage and transport of hydraulic min- ing sediment in the Bear- ume is more than double previous estimates of storage in the lower basin, and is greater than any

  6. Optimal Power Management for a Hydraulic Hybrid Delivery Truck

    E-Print Network [OSTI]

    Peng, Huei

    Optimal Power Management for a Hydraulic Hybrid Delivery Truck BIN WU, CHAN-CHIAO LIN, ZORAN FILIPI control strategies. This paper presents a methodology for developing a power management strategy tailored specifically to a parallel Hydraulic Hybrid Vehicle (HHV) configured for a medium-size delivery truck

  7. P and PI controllers for a nonlinear hydraulic network

    E-Print Network [OSTI]

    De Persis, Claudio

    constraints) arising in industrial applications. Current case study: Grundfos district heating system #12;P" district heating system #12;P and PI controllers for a nonlinear hydraulic network Sept. 20, 2007 Page 4 Results #12;P and PI controllers for a nonlinear hydraulic network Sept. 20, 2007 Page 5 District Heating

  8. Systematic Variability of Soil Hydraulic Conductivity Across Three Vertisol Catenas

    E-Print Network [OSTI]

    Rivera, Leonardo Daniel

    2011-10-21T23:59:59.000Z

    .......................................................... 16 Saturated Hydraulic Conductivity Measurements .......................... 19 Soil Sampling and Analysis ............................................................ 22 ROSETTA Modeling... properties. Manure application improved aggregation, decreased bulk density, and increased the hydraulic conductivity of the soil. Conventional tillage treatments had the highest bulk densities and lowest infiltration rates. Effects of Landscape Position...

  9. Creation and Impairment of Hydraulic Fracture Conductivity in Shale Formations

    E-Print Network [OSTI]

    Zhang, Junjing

    2014-07-10T23:59:59.000Z

    Multi-stage hydraulic fracturing is the key to the success of many shale gas and shale oil reservoirs. The main objectives of hydraulic fracturing in shale are to create artificial fracture networks that are conductive for oil and gas flow...

  10. Using electrical impedance tomography to map subsurface hydraulic conductivity

    DOE Patents [OSTI]

    Berryman, James G. (Danville, CA); Daily, William D. (Livermore, CA); Ramirez, Abelardo L. (Pleasanton, CA); Roberts, Jeffery J. (Livermore, CA)

    2000-01-01T23:59:59.000Z

    The use of Electrical Impedance Tomography (EIT) to map subsurface hydraulic conductivity. EIT can be used to map hydraulic conductivity in the subsurface where measurements of both amplitude and phase are made. Hydraulic conductivity depends on at least two parameters: porosity and a length scale parameter. Electrical Resistance Tomography (ERT) measures and maps electrical conductivity (which can be related to porosity) in three dimensions. By introducing phase measurements along with amplitude, the desired additional measurement of a pertinent length scale can be achieved. Hydraulic conductivity controls the ability to flush unwanted fluid contaminants from the surface. Thus inexpensive maps of hydraulic conductivity would improve planning strategies for subsequent remediation efforts. Fluid permeability is also of importance for oil field exploitation and thus detailed knowledge of fluid permeability distribution in three-dimension (3-D) would be a great boon to petroleum reservoir analysts.

  11. Design, modeling, fabrication and testing of a piezoelectric microvalve for high pressure, high frequency hydraulic applications

    E-Print Network [OSTI]

    Roberts, David C. (David Christopher)

    2002-01-01T23:59:59.000Z

    A piezoelectrically-driven hydraulic amplification microvalve for use in high specific power hydraulic pumping applications was designed, fabricated, and experimentally characterized. High frequency, high force actuation ...

  12. Method for valve seating control for an electro-hydraulic engine valve

    DOE Patents [OSTI]

    Sun, Zongxuan (Plymouth, MN)

    2011-01-11T23:59:59.000Z

    Valve lift in an internal combustion engine is controlled by an electro-hydraulic actuation mechanism including a selectively actuable hydraulic feedback circuit.

  13. Powertrain System HANT: Hydraulic Pump/Motor

    SciTech Connect (OSTI)

    Not Available

    1993-06-01T23:59:59.000Z

    The development of the new Hydraulic Pump/Motor is the main part of the Powertrain-System HANT. Several Engineering Models of the same design have been tested to prove that the new concept is effective. The important ranges: Maximum pressure and rpm and low power (low pressure, rpm, swashplate angle) were tested successfully. The efficiencies in all areas have already shown the same or better data then those of the best products on the market. The tests have been conducted in Switzerland (maximum power) in 1987 and at the UWM-Madison, Wisconsin (low power efficiency) in 1988. Based on these data and several new useful design features the Engineering Model has been updated. In addition, the reduction of unnecessary safety factor, new materials and mass-production like manufacturing methods, has lead to an significantly improved Prototype Design. The updated version and its expected improved technical data are presented in this report.

  14. Neutron Imaging Reveals Internal Plant Hydraulic Dynamics

    SciTech Connect (OSTI)

    Warren, Jeffrey [ORNL; Bilheux, Hassina Z [ORNL; Kang, Misun [ORNL; Voisin, Sophie [ORNL; Cheng, Chu-Lin [ORNL; Horita, Jusuke [ORNL; Perfect, Edmund [ORNL

    2013-01-01T23:59:59.000Z

    Many terrestrial ecosystem processes are constrained by water availability and transport within the soil. Knowledge of plant water fluxes is thus critical for assessing mechanistic processes linked to biogeochemical cycles, yet resolution of root structure and xylem water transport dynamics has been a particularly daunting task for the ecologist. Through neutron imaging, we demonstrate the ability to non-invasively monitor individual root functionality and water fluxes within Zea mays L. (maize) and Panicum virgatum L. (switchgrass) seedlings growing in a sandy medium. Root structure and growth were readily imaged by neutron radiography and neutron computed tomography. Seedlings were irrigated with water or deuterium oxide and imaged through time as a growth lamp was cycled on to alter leaf demand for water. Sub-millimeter scale resolution reveals timing and magnitudes of root water uptake, redistribution within the roots, and root-shoot hydraulic linkages, relationships not well characterized by other techniques.

  15. Gas Test Loop Booster Fuel Hydraulic Testing

    SciTech Connect (OSTI)

    Gas Test Loop Hydraulic Testing Staff

    2006-09-01T23:59:59.000Z

    The Gas Test Loop (GTL) project is for the design of an adaptation to the Advanced Test Reactor (ATR) to create a fast-flux test space where fuels and materials for advanced reactor concepts can undergo irradiation testing. Incident to that design, it was found necessary to make use of special booster fuel to enhance the neutron flux in the reactor lobe in which the Gas Test Loop will be installed. Because the booster fuel is of a different composition and configuration from standard ATR fuel, it is necessary to qualify the booster fuel for use in the ATR. Part of that qualification is the determination that required thermal hydraulic criteria will be met under routine operation and under selected accident scenarios. The Hydraulic Testing task in the GTL project facilitates that determination by measuring flow coefficients (pressure drops) over various regions of the booster fuel over a range of primary coolant flow rates. A high-fidelity model of the NW lobe of the ATR with associated flow baffle, in-pile-tube, and below-core flow channels was designed, constructed and located in the Idaho State University Thermal Fluids Laboratory. A circulation loop was designed and constructed by the university to provide reactor-relevant water flow rates to the test system. Models of the four booster fuel elements required for GTL operation were fabricated from aluminum (no uranium or means of heating) and placed in the flow channel. One of these was instrumented with Pitot tubes to measure flow velocities in the channels between the three booster fuel plates and between the innermost and outermost plates and the side walls of the flow annulus. Flow coefficients in the range of 4 to 6.5 were determined from the measurements made for the upper and middle parts of the booster fuel elements. The flow coefficient for the lower end of the booster fuel and the sub-core flow channel was lower at 2.3.

  16. Relationship between Anisotropy in Soil Hydraulic Conductivity and Saturation

    SciTech Connect (OSTI)

    Zhang, Z. Fred

    2014-01-01T23:59:59.000Z

    Anisotropy in unsaturated hydraulic conductivity is saturation-dependent. Accurate characterization of soil anisotropy is very important in simulating flow and contaminant (e.g., radioactive nuclides in Hanford) transport. A recently developed tensorial connectivity-tortuosity (TCT) concept describes the hydraulic conductivity tensor of the unsaturated anisotropic soils as the product of a scalar variable, the symmetric connectivity tortuosity tensor, and the hydraulic conductivity tensor at saturation. In this study, the TCT model is used to quantify soil anisotropy in unsaturated hydraulic conductivity. The TCT model can describe different types of soil anisotropy; e.g., the anisotropy coefficient, C, can be monotonically increase or decrease with saturation and can vary from greater than unity to less than unity and vice versa. Soil anisotropy is independent of soil water retention properties and can be characterized by the ratio of the saturated hydraulic conductivities and the difference of the tortuosity-connectivity coefficients in two directions. ln(C) is linearly proportional to ln(Se) with Se being the effective saturation. The log-linear relationship between C and Se allows the saturation-dependent anisotropy to be determined using linear regression with the measurements of the directional hydraulic conductivities at a minimum of two water content levels, of which one may be at full saturation. The model was tested using measurements of directional hydraulic conductivities.

  17. Hydraulic Hybrid Parcel Delivery Truck Deployment, Testing & Demonstration

    SciTech Connect (OSTI)

    Gallo, Jean-Baptiste

    2014-03-31T23:59:59.000Z

    Although hydraulic hybrid systems have shown promise over the last few years, commercial deployment of these systems has primarily been limited to Class 8 refuse trucks. In 2005, the Hybrid Truck Users Forum initiated the Parcel Delivery Working Group including the largest parcel delivery fleets in North America. The goal of the working group was to evaluate and accelerate commercialization of hydraulic hybrid technology for parcel delivery vehicles. FedEx Ground, Purolator and United Parcel Service (UPS) took delivery of the world’s first commercially available hydraulic hybrid parcel delivery trucks in early 2012. The vehicle chassis includes a Parker Hannifin hydraulic hybrid drive system, integrated and assembled by Freightliner Custom Chassis Corp., with a body installed by Morgan Olson. With funding from the U.S. Department of Energy, CALSTART and its project partners assessed the performance, reliability, maintainability and fleet acceptance of three pre-production Class 6 hydraulic hybrid parcel delivery vehicles using information and data from in-use data collection and on-road testing. This document reports on the deployment of these vehicles operated by FedEx Ground, Purolator and UPS. The results presented provide a comprehensive overview of the performance of commercial hydraulic hybrid vehicles in parcel delivery applications. This project also informs fleets and manufacturers on the overall performance of hydraulic hybrid vehicles, provides insights on how the technology can be both improved and more effectively used. The key findings and recommendations of this project fall into four major categories: ? Performance, ? Fleet deployment, ? Maintenance, ? Business case. Hydraulic hybrid technology is relatively new to the market, as commercial vehicles have been introduced only in the past few years in refuse and parcel delivery applications. Successful demonstration could pave the way for additional purchases of hydraulic hybrid vehicles throughout the trucking industry. By providing unbiased, third-party assessment of this “hybrid without batteries” technology, this report offers relevant, timely and valuable information to the industry.

  18. KJRR-FAI Hydraulic Flow Testing Input Package

    SciTech Connect (OSTI)

    N.E. Woolstenhulme; R.B. Nielson; D.B. Chapman

    2013-12-01T23:59:59.000Z

    The INL, in cooperation with the KAERI via Cooperative Research And Development Agreement (CRADA), undertook an effort in the latter half of calendar year 2013 to produce a conceptual design for the KJRR-FAI campaign. The outcomes of this effort are documented in further detail elsewhere [5]. The KJRR-FAI was designed to be cooled by the ATR’s Primary Coolant System (PCS) with no provision for in-pile measurement or control of the hydraulic conditions in the irradiation assembly. The irradiation assembly was designed to achieve the target hydraulic conditions via engineered hydraulic losses in a throttling orifice at the outlet of the irradiation vehicle.

  19. An implicit level set method for modeling hydraulically driven fractures Anthony Peirce a,*, Emmanuel Detournay b

    E-Print Network [OSTI]

    Peirce, Anthony

    An implicit level set method for modeling hydraulically driven fractures Anthony Peirce a the relevant tip asymptotics in hydraulic fracture simulators is critical for the accuracy and stability for a propagating hydraulic fracture. A number of char- acteristics of the governing equations for hydraulic

  20. Hydraulic Effects of Changes in Bottom-Land Vegetation on Three

    E-Print Network [OSTI]

    Hydraulic Effects of Changes in Bottom-Land Vegetation on Three Major Floods, Gila RiverKelvey, Director Library of Congress Cataloging in Publication Data Burkham, D. E. 1927 Hydraulic effects 19.16:655-J 1. Gila River-Floods. 2. Hydraulics. 3. Botany-Ecology-Gila River. 1. Title: Hydraulic

  1. Effects of hydraulic roughness on surface textures of gravel-bed rivers

    E-Print Network [OSTI]

    Effects of hydraulic roughness on surface textures of gravel-bed rivers John M. Buffington1 that bed-surface grain size is responsive to hydraulic roughness caused by bank irregularities, bars condition of low hydraulic roughness. For a given 0bf , channels with progressively greater hydraulic

  2. F. Froux et al.Hydraulic properties of Mediterranean conifers Original article

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    F. Froux et al.Hydraulic properties of Mediterranean conifers Original article Xylem hydraulic (Received 5 November 2001; accepted 11 February 2002) Abstract ­ We studied the xylem hydraulic traits specific hydraulic conductivity was much higher in Cupressus sempervirens and P. nigra than in Cedrus

  3. Hydraulic Fracture Monitoring: A Jonah Field Case Study

    E-Print Network [OSTI]

    Seher, T.

    2011-01-01T23:59:59.000Z

    Hydraulic fracturing involves the injection of a fluid to fracture oil and gas reservoirs, and thus increase their permeability. The process creates numerous microseismic events, which can be used to monitor subsurface ...

  4. Numerical Investigation of Interaction Between Hydraulic Fractures and Natural Fractures

    E-Print Network [OSTI]

    Xue, Wenxu

    2011-02-22T23:59:59.000Z

    Hydraulic fracturing of a naturally-fractured reservoir is a challenge for industry, as fractures can have complex growth patterns when propagating in systems of natural fractures in the reservoir. Fracture propagation near a natural fracture (NF...

  5. Investigation of Created Fracture Geometry through Hydraulic Fracture Treatment Analysis

    E-Print Network [OSTI]

    Ahmed, Ibraheem 1987-

    2012-11-30T23:59:59.000Z

    Successful development of shale gas reservoirs is highly dependent on hydraulic fracture treatments. Many questions remain in regards to the geometry of the created fractures. Production data analysis from some shale gas wells quantifies a much...

  6. Studying Hydraulic Fracturing through Time-variant Seismic Anisotropy

    E-Print Network [OSTI]

    Liu, Qifan

    2013-10-01T23:59:59.000Z

    . Studying seismic anisotropy by shear wave splitting can help us better understand the relationship between hydraulic fracturing and fracture systems. Shear wave splitting can be caused by fracturing and also can naturally take place in most sedimentary...

  7. Shale Gas Application in Hydraulic Fracturing Market is likely...

    Open Energy Info (EERE)

    Shale Gas Application in Hydraulic Fracturing Market is likely to grow at a rate of 6.46%, owing to increased natural gas demand Home > Groups > Renewable Energy RFPs Wayne31jan's...

  8. The hydraulic bump: The surface signature of a plunging jet

    E-Print Network [OSTI]

    Labousse, M.

    When a falling jet of fluid strikes a horizontal fluid layer, a hydraulic jump arises downstream of the point of impact, provided a critical flow rate is exceeded. We here examine a phenomenon that arises below this jump ...

  9. On-line hydraulic state prediction for water distribution systems

    E-Print Network [OSTI]

    Whittle, Andrew

    This paper describes and demonstrates a method for on?line hydraulic state prediction in urban water networks. The proposed method uses a Predictor?Corrector (PC) approach in which a statistical data?driven algorithm is ...

  10. Fracture Evolution Following a Hydraulic Stimulation within an EGS Reservoir

    Broader source: Energy.gov [DOE]

    DOE Geothermal Peer Review 2010 - Presentation. This project will provide the first ever formal evaluation of fracture and fracture flow evolution in an EGS reservoir following a hydraulic stimulation.

  11. Hydraulically actuated gas exchange valve assembly and engine using same

    DOE Patents [OSTI]

    Carroll, Thomas S. (Peoria, IL); Taylor, Gregory O. (Hinsdale, IL)

    2002-09-03T23:59:59.000Z

    An engine comprises a housing that defines a hollow piston cavity that is separated from a gas passage by a valve seat. The housing further defines a biasing hydraulic cavity and a control hydraulic cavity. A gas valve member is also included in the engine and is movable relative to the valve seat between an open position at which the hollow piston cavity is open to the gas passage and a closed position in which the hollow piston cavity is blocked from the gas passage. The gas valve member includes a ring mounted on a valve piece and a retainer positioned between the ring and the valve piece. A closing hydraulic surface is included on the gas valve member and is exposed to liquid pressure in the biasing hydraulic cavity.

  12. Chile, 2009 HYDRAULIC MANAGEMENT OF FILAMENTOUS ALGAE IN

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    7 th ISE & 8 th HIC Chile, 2009 HYDRAULIC MANAGEMENT OF FILAMENTOUS ALGAE IN OPEN-CHANNEL NETWORKS mechanical interventions to avoid overflows. Moreover, drifting algae cells increase water turbidity

  13. INVESTIGATIONS ON HYDRAULIC CEMENTS FROM SPENT OIL SHALE

    E-Print Network [OSTI]

    Mehta, P.K.

    2012-01-01T23:59:59.000Z

    ON HYDRAULIC CEMENTS FROM SPENT OIL SHALE P.K. Mehta and P.Cement Manufacture from Oil Shale, U.S. Patent 2,904,445,203 (1974), E. D. York, Amoco Oil Co. , letter to J, P. Fox,

  14. Steady state thermal hydraulic analysis of hydride fueled BWRs

    E-Print Network [OSTI]

    Ferroni, Paolo, Ph. D. Massachusetts Institute of Technology

    2006-01-01T23:59:59.000Z

    (cont.) Since the results obtained in the main body of the analysis account only for thermal-hydraulic constraints, an estimate of the power reduction due to the application of neutronic constraints is also performed. This ...

  15. Water Use for Hydraulic Fracturing: A Texas Sized Problem? 

    E-Print Network [OSTI]

    LeClere, David

    2014-01-01T23:59:59.000Z

    The state of Texas could face a 2.7 trillion gallon shortfall of water by 2060. Hydraulic fracturing (HF) requires large amounts of water for each well. Tax incentives should be offered to companies that substitute brackish ...

  16. Development and Simulation of Mathematical Modelling of Hydraulic Turbine

    E-Print Network [OSTI]

    Gagan Singh; D. S. Chauhan

    Abstract- Power system performance is affected by dynamic characteristics of hydraulic governor-turbines during and following any disturbance, such as occurrence of a fault, loss of a transmission line or a rapid change of load. Accurate modelling of hydraulic System is essential to characterize and diagnose the system response. In this article the mathematical modeling of hydraulic turbine is presented. The model is capable to implement the digital systems for monitoring and control replacing the conventional control systems for power, frequency and voltage. This paper presents the possibilities of modeling and simulation of the hydro power plants and performs an analysis of different control structures and algorithms. Key words: mathematical modeling, simulation, hydraulic turbine. I.

  17. Adaptive control of hydraulic shift actuation in an automatic transmission

    E-Print Network [OSTI]

    Thornton, Sarah Marie

    2013-01-01T23:59:59.000Z

    A low-order dynamic model of a clutch for hydraulic control in an automatic transmission is developed by separating dynamics of the shift into four regions based on clutch piston position. The first three regions of the ...

  18. Integrated hydraulic cooler and return rail in camless cylinder head

    DOE Patents [OSTI]

    Marriott, Craig D. (Clawson, MI); Neal, Timothy L. (Ortonville, MI); Swain, Jeff L. (Flushing, MI); Raimao, Miguel A. (Colorado Springs, CO)

    2011-12-13T23:59:59.000Z

    An engine assembly may include a cylinder head defining an engine coolant reservoir, a pressurized fluid supply, a valve actuation assembly, and a hydraulic fluid reservoir. The valve actuation assembly may be in fluid communication with the pressurized fluid supply and may include a valve member displaceable by a force applied by the pressurized fluid supply. The hydraulic fluid reservoir may be in fluid communication with the valve actuation assembly and in a heat exchange relation to the engine coolant reservoir.

  19. Gravity-free hydraulic jumps and metal femtocups

    E-Print Network [OSTI]

    Rama Govindarajan; Manikandan Mathur; Ratul DasGupta; N. R. Selvi; Neena Susan John; G. U. Kulkarni

    2006-10-03T23:59:59.000Z

    Hydraulic jumps created by gravity are seen every day in the kitchen sink. We show that at small scales a circular hydraulic jump can be created in the absence of gravity, by surface tension. The theory is motivated by our experimental finding of a height discontinuity in spreading submicron molten metal droplets created by pulsed-laser ablation. By careful control of initial conditions, we show that this leads to solid femtolitre cups of gold, silver, copper, niobium and tin.

  20. Long-term hydraulic properties of subsurface flow constructed wetlands

    E-Print Network [OSTI]

    Turner, Glenn Allen

    1994-01-01T23:59:59.000Z

    Vegetation Hydraulic Design Removal Kinetics and Organic Loading Summary lvlATERIALS AND METHODS 5 5 6 . 15 . 16 . 17 RESULTS AND DISCUSSION . Sieve Analysis System Performance Hydraulic Conductivity Porosity Turbulent Flow Comparison of One... analysis of the bull rock. System Performance The operation of this research project generally seemed to be successful. However, there were a few problems with the operation of the appamtus which warrant attention. The major problems were leakage...

  1. Process management using component thermal-hydraulic function classes

    DOE Patents [OSTI]

    Morman, James A. (Woodridge, IL); Wei, Thomas Y. C. (Downers Grove, IL); Reifman, Jaques (Western Springs, IL)

    1999-01-01T23:59:59.000Z

    A process management expert system where following malfunctioning of a component, such as a pump, for determining system realignment procedures such as for by-passing the malfunctioning component with on-line speeds to maintain operation of the process at full or partial capacity or to provide safe shut down of the system while isolating the malfunctioning component. The expert system uses thermal-hydraulic function classes at the component level for analyzing unanticipated as well as anticipated component malfunctions to provide recommended sequences of operator actions. Each component is classified according to its thermal-hydraulic function, and the generic and component-specific characteristics for that function. Using the diagnosis of the malfunctioning component and its thermal hydraulic class, the expert system analysis is carried out using generic thermal-hydraulic first principles. One aspect of the invention employs a qualitative physics-based forward search directed primarily downstream from the malfunctioning component in combination with a subsequent backward search directed primarily upstream from the serviced component. Generic classes of components are defined in the knowledge base according to the three thermal-hydraulic functions of mass, momentum and energy transfer and are used to determine possible realignment of component configurations in response to thermal-hydraulic function imbalance caused by the malfunctioning component. Each realignment to a new configuration produces the accompanying sequence of recommended operator actions. All possible new configurations are examined and a prioritized list of acceptable solutions is produced.

  2. Process management using component thermal-hydraulic function classes

    DOE Patents [OSTI]

    Morman, J.A.; Wei, T.Y.C.; Reifman, J.

    1999-07-27T23:59:59.000Z

    A process management expert system where following malfunctioning of a component, such as a pump, for determining system realignment procedures such as for by-passing the malfunctioning component with on-line speeds to maintain operation of the process at full or partial capacity or to provide safe shut down of the system while isolating the malfunctioning component. The expert system uses thermal-hydraulic function classes at the component level for analyzing unanticipated as well as anticipated component malfunctions to provide recommended sequences of operator actions. Each component is classified according to its thermal-hydraulic function, and the generic and component-specific characteristics for that function. Using the diagnosis of the malfunctioning component and its thermal hydraulic class, the expert system analysis is carried out using generic thermal-hydraulic first principles. One aspect of the invention employs a qualitative physics-based forward search directed primarily downstream from the malfunctioning component in combination with a subsequent backward search directed primarily upstream from the serviced component. Generic classes of components are defined in the knowledge base according to the three thermal-hydraulic functions of mass, momentum and energy transfer and are used to determine possible realignment of component configurations in response to thermal-hydraulic function imbalance caused by the malfunctioning component. Each realignment to a new configuration produces the accompanying sequence of recommended operator actions. All possible new configurations are examined and a prioritized list of acceptable solutions is produced. 5 figs.

  3. Admission Brochure VLFM

    E-Print Network [OSTI]

    Srivastava, Kumar Vaibhav

    by the Government of India. One of the key objectives of NMCC, among others, is to serve as a policy forum An Initiative of National Manufacturing Competitiveness Council, Government of India, for career development. Background Growth of the manufacturing sector in India has been recognized as a key thrust area

  4. Deployment & Market Transformation (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    NREL's deployment and market transformation (D and MT) activities encompass the laboratory's full range of technologies, which span the energy efficiency and renewable energy spectrum. NREL staff educates partners on how they can advance sustainable energy applications and also provides clients with best practices for reducing barriers to innovation and market transformation.

  5. Life Sciences Undergraduate Brochure

    E-Print Network [OSTI]

    Davies, Christopher

    input, sustainable crop production the primary target for agricultural research. Future crops;Redesigning Plants: 21st century agriculture faces massive challenges to provide food security for the human race. Expansion of world populations, increased energy costs and climate change conspire to make low

  6. sandia-brochure-final

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    have been calculated to produce much higher fuel yields than other terrestrial biomass feedstocks. Sandia is focused on: Production and conversion of whole turf algae polycutures...

  7. CALIFORNIA ENERGY Project Brochures

    E-Print Network [OSTI]

    , Heschong Mahone Group. Dr. Mark Modera, Aeroseal Inc. Andy Rhoades, Thomas Properties Group. Stephen

  8. sandia-brochure-final

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron4 Self-Scrubbing:,, ,Development ofrluyendi AmesProgramtimedCorporation,

  9. STEP Brochure (Spanish)

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCO OverviewRepository | DepartmentSEA-04:Department of¿QUÉ ES STEP? "El

  10. TEPP Planning Brochure

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE'sSummaryDepartmentEnergy MeetingMarchEnergy 0 -TEPP

  11. TEPP Training Brochure

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE'sSummaryDepartmentEnergy MeetingMarchEnergy 0CECBEMS

  12. KLO Brochure (PDF) Final

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron beamJoin2015Just Plain Cool,relocatesm

  13. QA Brochure October 2009

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHASeptember 2010 |ofDepartment ofPart|Questions and answers

  14. LPO-Brochure-CSP

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & Gas » MethaneJohnsonKristina PflanzLM NewsBlog LPO Blogteam of

  15. Brochures | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About Batteries Batteries AnVirtual Tour ThisTechnologies

  16. brochure.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron4 Self-Scrubbing:,, , ., ..., ,+ . :, ,. ., ,., ,, '..' .30,

  17. Numerical and physical modeling of hydraulic structures Hydraulic structures are used to control the flow of water in hydropower developments, urban

    E-Print Network [OSTI]

    Barthelat, Francois

    Numerical and physical modeling of hydraulic structures Hydraulic structures are used to control, their solution is found either by physical hydraulic modeling or, more recently, by numerical modeling significantly reduce turbine efficiency and cause premature mechanical failure when they occur at hydropower

  18. Engineering Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeeches Energy Speeches RSS JuneInstitute Engineering

  19. Seaborg Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebook Twitter PrincipalfuelTorusconditionsSupportedScottInstitute

  20. Development of a hydraulic borehole seismic source

    SciTech Connect (OSTI)

    Cutler, R.P.

    1998-04-01T23:59:59.000Z

    This report describes a 5 year, $10 million Sandia/Industry project to develop an advanced borehole seismic source for use in oil and gas exploration and production. The development Team included Sandia, Chevron, Amoco, Conoco, Exxon, Raytheon, Pelton, and GRI. The seismic source that was developed is a vertically oriented, axial point force, swept frequency, clamped, reaction-mass vibrator design. It was based on an early Chevron prototype, but the new tool incorporates a number of improvements which make it far superior to the original prototype. The system consists of surface control electronics, a special heavy duty fiber optic wireline and draw works, a cablehead, hydraulic motor/pump module, electronics module, clamp, and axial vibrator module. The tool has a peak output of 7,000 lbs force and a useful frequency range of 5 to 800 Hz. It can operate in fluid filled wells with 5.5-inch or larger casing to depths of 20,000 ft and operating temperatures of 170 C. The tool includes fiber optic telemetry, force and phase control, provisions to add seismic receiver arrays below the source for single well imaging, and provisions for adding other vibrator modules to the tool in the future. The project yielded four important deliverables: a complete advanced borehole seismic source system with all associated field equipment; field demonstration surveys funded by industry showing the utility of the system; industrial sources for all of the hardware; and a new service company set up by their industrial partner to provide commercial surveys.

  1. Advanced Studies Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Institute Advanced Studies Institute Contact Institute Director Charles Farrar (505) 663-5330 Email UCSD EI Director Michael Todd (858) 534-5951 Professional Staff...

  2. MNSR transient analyses and thermal-hydraulic safety margins for HEU and LEU cores using PARET

    SciTech Connect (OSTI)

    Olson, Arne P. [RERTR Program, Argonne National Laboratory, Argonne, IL 60439 (United States); Jonah, S.A. [Centre for Energy Research and Training, Ahmadu Bello University, Zaria, P.M.B. 1014 (Nigeria)

    2008-07-15T23:59:59.000Z

    Thermal-hydraulic performance characteristics of Miniature Neutron Source Reactors under long-term steady-state and transient conditions are investigated. Safety margins and limiting conditions attained during these events are determined. Modeling extensions are presented that enable the PARET/ANL code to realistically track primary loop heatup, heat exchange to the pool, and heat loss from the pool to air over the pool. Comparisons are made of temperature predictions for HEU and LEU fueled cores under transient conditions. Results are obtained using three different natural convection heat transfer correlations: the original (PARET/ANL version 5), Churchill-Chu, and an experiment- based correlation from the China Institute of Atomic Energy (CIAE). The MNSR, either fueled by HEU or by LEU, satisfies the design limits for long-term transient operation. (author)

  3. SUDS Ponds in Scotland Performance Outcomes to Date Institute of Ecology & Resource Management

    E-Print Network [OSTI]

    Heal, Kate

    been widely constructed in Scotland because the wet climate and low hydraulic conductivity of soils limit infiltration options at many sites. Furthermore, the construction of SUDS ponds has not involved1 SUDS Ponds in Scotland ­ Performance Outcomes to Date KATE HEAL Institute of Ecology & Resource

  4. EC Driver - 41" Stroke Hydraulic Cylinder

    SciTech Connect (OSTI)

    Jaques, A.; /Fermilab

    1990-05-24T23:59:59.000Z

    It was decided to use a hydraulic cylinder resting on the floor of the argon spill trough in the EC carriage to drive the EC's motion on the center beam. Space was limited due to the spill bellows and their required support and containment system. The 0.0. of the cylinder had to be limited to 3 to 3-1/2 inches, maximum. The weight of a wet EC and carriage is estimated to be 320 tons. The rolling coefficient of friction of the Tychoway rollers chosen to guide the EC and carriage along the hardened centerbeam ways is claimed to be less than 0.0025. The driver will also need to overcome the forces produced by moving (rotating) the numerous bayonets located at the top of the cryostats in the many piping systems. These forces were conservatively estimated at 1000 lbs. The drive force required to overcome these forces was then calculated to be: 320(2,000) x 0.0025 + 1,000 = 2.600 lbs. (min. required). Due to the uncertainty in the actual roller coefficient of friction and the various unknowns in estimating the resistive forces contained in the piping and cabling systems attached to the cryostat, a conservative design factor of 5 was chosen. This should account for any uncertainty in our estimation of the minimum required drive force and also leaves us with a reserve to fall back on in case any unforeseen problems might arise. Thus the desired capacity of the driver was set at: (2,600) x 5 = 13,000 lbs. (design capacity). Assuming a 3 inch O.D. cylinder with a 1/2 inch wall (2 inch bore), we first analyzed a 1-3/8 inch diameter piston rod. Using Shigley & Mischke's 'Mechanical Engineering Design' (5th Ed.) and it's formulas for long columns with central loading, it was determined that a 1-3/8 inch diameter rod would not suffice, given our safety factor of 2. Increasing the piston rod diameter to 1-1/2 inches proved to be sufficient. The maximum allowable load came out to be approximately 17,000 lbs., which is greater than the 13,000 lbs. design capacity. With a 1-1/2 inch rod, a 2 inch bore and 10,000 psi capacity, the maximum return (retraction) force is: ({pi}/4)(2{sup 2}-1.52) x (10,000) = 13,744 lbs. (return force). This meets the desired design capacity of the cylinder. On the extension of the cylinder, the pressure will be limited such to produce only the 13,000 lb. design capacity. Through the use of a regulator on the cylinder extension inlet, the pressure will be limited to: 13,000/[({pi}/4)(2){sup 2}] {approx_equal} 4,200 psi. (regulator setting) and 4,200 x ({pi}/4)(2){sup 2} = 13,195 lbs. (thrust force). Another reference used by some Fermi engineers in designing hydraulic cylinders is the 'Design Engineers Handbook', Bulletin 0224-B1 published by the Parker-Hannifin Corporation. The piston rod-stroke selection table on page b-5 is used to determine the stroke factor. Our setup most approximates Case II of the table which gives a stroke factor of 0.70. Multiplying this by the actual stroke (41-inch) gives us a basic length of 28.7-inch. Using the piston rodstroke selection graph on page b-6, the 1-1/2 inch rod and 28.7-inch basic length indicate an allowable thrust of approximately 13,000 lbs. According to the Chief Application Engineer at the Parker-Hannifin regional sales office in Des Plaines, IL, a min imum safety factor of 4 can be assumed in the piston rod-stroke selection graph, possibly even higher. This would be at least twice as high as our initial safety factor of 2. Thus we feel our cylinder design falls well within the acceptable region of this reference.

  5. Advanced hydraulic fracturing methods to create in situ reactive barriers

    SciTech Connect (OSTI)

    Murdoch, L. [FRX Inc., Cincinnati, OH (United States)]|[Clemson Univ., SC (United States). Dept. of Geological Sciences; Siegrist, B.; Meiggs, T. [Oak Ridge National Lab., TN (United States)] [and others

    1997-12-31T23:59:59.000Z

    This article describes the use of hydraulic fracturing to increase permeability in geologic formations where in-situ remedial action of contaminant plumes will be performed. Several in-situ treatment strategies are discussed including the use of hydraulic fracturing to create in situ redox zones for treatment of organics and inorganics. Hydraulic fracturing methods offer a mechanism for the in-situ treatment of gently dipping layers of reactive compounds. Specialized methods using real-time monitoring and a high-energy jet during fracturing allow the form of the fracture to be influenced, such as creation of assymmetric fractures beneath potential sources (i.e. tanks, pits, buildings) that should not be penetrated by boring. Some examples of field applications of this technique such as creating fractures filled with zero-valent iron to reductively dechlorinate halogenated hydrocarbons, and the use of granular activated carbon to adsorb compounds are discussed.

  6. On equivalence of thinning fluids used for hydraulic fracturing

    E-Print Network [OSTI]

    Linkov, Alexander

    2012-01-01T23:59:59.000Z

    The paper aims to answer the question: if and how non-Newtonian fluids may be compared in their mechanical action when used for hydraulic fracturing? By employing the modified formulation of the PKN problem we obtain its simple analytical solutions in the cases of perfectly plastic and Newtonian fluids. Since the results for shear thinning fluids are intermediate between those for these cases, the obtained equation for the fracture length suggests a criterion of the equivalence of various shear thinning fluids for the problem of hydraulic fractures. We assume fluids equivalent in their hydrofracturing action, when at a reference time they produce fractures of the same length. The equation for the fracture length translates the equivalence in terms of the hydraulic fracture length and treatment time into the equivalence in terms of the properties of a fracturing fluid (behavior and consistency indices). Analysis shows that the influence of the consistency and behavior indices on the fracture length, particle v...

  7. Hydraulic manipulator design, analysis, and control at Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Kress, R.L.; Jansen, J.F. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Love, L.J. [Oak Ridge Inst. for Science and Education, TN (United States); Basher, A.M.H. [South Carolina State Univ., Orangeburg, SC (United States)

    1996-09-01T23:59:59.000Z

    To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned to hydraulics as a means of actuation. Hydraulics have always been the actuator of choice when designing heavy-life construction and mining equipment such as bulldozers, backhoes, and tunneling devices. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem) sophisticated modeling, analysis, and control experiments are usually needed. To support the development and deployment of new hydraulic manipulators Oak Ridge National Laboratory (ORNL) has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The hydraulics laboratory at ORNL has three different manipulators. First is a 6-Degree-of-Freedom (6-DoF), multi-planer, teleoperated, flexible controls test bed used for the development of waste tank clean-up manipulator controls, thermal studies, system characterization, and manipulator tracking. Finally, is a human amplifier test bed used for the development of an entire new class of teleoperated systems. To compliment the hardware in the hydraulics laboratory, ORNL has developed a hydraulics simulation capability including a custom package to model the hydraulic systems and manipulators for performance studies and control development. This paper outlines the history of hydraulic manipulator developments at ORNL, describes the hydraulics laboratory, discusses the use of the equipment within the laboratory, and presents some of the initial results from experiments and modeling associated with these hydraulic manipulators. Included are some of the results from the development of the human amplifier/de-amplifier concepts, the characterization of the thermal sensitivity of hydraulic systems, and end-point tracking accuracy studies. Experimental and analytical results are included.

  8. Comparison of methods for determining soil hydraulic characteristics

    E-Print Network [OSTI]

    Byrd Humphreys, Kathryn

    1979-01-01T23:59:59.000Z

    to the comprehension of soil water movement. The theory of water movement in soil is based on Darcy's Law which states that flow is proportional to the hydraulic gradient. The equation representing one dimensional flow in a homogeneous iso- tropic media can... of the gravitational head (hg) and the pressure head (h) as follows: H=hg+h In unsaturated flow, the components of the flow equation, K and H, are both dependent on the water content of the soil. These relation- ships between soil water content versus hydraulic...

  9. University of Stuttgart, Institute for Modelling Hydraulic and Environmental Independent Junior Research Group: Stochastic Modelling of

    E-Print Network [OSTI]

    Cirpka, Olaf Arie

    Equation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.4 Darcy's Law . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.5 The Multiphase Flow Differential Equation . . . . . . . . . . . . . . . . . . . 14 2

  10. Joint Hydraulic Institute/ASAP Letter of March 30th - Clarification of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & Gas » MethaneJohnson Controls EnergyJoin theFuel CellPoint #2 |

  11. The Effect of Proppant Size and Concentration on Hydraulic Fracture Conductivity in Shale Reservoirs 

    E-Print Network [OSTI]

    Kamenov, Anton

    2013-04-11T23:59:59.000Z

    Hydraulic fracture conductivity in ultra-low permeability shale reservoirs is directly related to well productivity. The main goal of hydraulic fracturing in shale formations is to create a network of conductive pathways in the rock which increase...

  12. Hydraulic Fracture Optimization with a Pseudo-3D Model in Multi-layered Lithology 

    E-Print Network [OSTI]

    Yang, Mei

    2011-10-21T23:59:59.000Z

    Hydraulic Fracturing is a technique to accelerate production and enhance ultimate recovery of oil and gas while fracture geometry is an important aspect in hydraulic fracturing design and optimization. Systematic design ...

  13. Pediatric Mechanical Circulatory Support Applications for Frequency-Leveraged Piezoelectric Hydraulic Pumps

    E-Print Network [OSTI]

    Valdovinos, John

    2014-01-01T23:59:59.000Z

    B. Olsen, “Axial flow blood pumps,” ASAIO J. Am. Soc. Artif.of a Piezoelectric-hydraulic Pump with Active Valves,” J.Piezoelectric Hydraulic Pump Development,” J. Intell. Mater.

  14. Water management in hydraulic fracturing-a planning and decision optimization platform

    E-Print Network [OSTI]

    Mehta, Neha, S.M. Massachusetts Institute of Technology

    2014-01-01T23:59:59.000Z

    Recent developments in hydraulic fracturing technology have enabled cost-effective production of unconventional resources, particularly shale gas in the U.S. The process of hydraulic fracturing is water intensive, requiring ...

  15. Park City/ANS 1 EVOLVE LITHIUM TRAY THERMAL-HYDRAULIC ANALYSIS

    E-Print Network [OSTI]

    California at Los Angeles, University of

    Park City/ANS 1 EVOLVE LITHIUM TRAY THERMAL-HYDRAULIC ANALYSIS M.H. Anderson, J.G. Murphy, M is viable, thermal-hydraulic analyses were performed on the outboard liquid lithium blanket trays. Various

  16. Quantitative Metrics of Soil Structure and Relationships to Hydraulic Properties in a Vertic Argiudoll

    E-Print Network [OSTI]

    Eck, Dennis V.

    2014-05-31T23:59:59.000Z

    to soil hydraulic parameters, especially saturated hydraulic conductivity (Ks) and water retention curve (WRC) parameters. Soil moisture data collected at the lysimeter, in conjunction with atmospheric data from an adjacent tower, were used as inputs...

  17. THERMAL-HYDRAULIC STUDIES IN SUPPORT OF THE ARIES-CS T-TUBE DIVERTOR DESIGN

    E-Print Network [OSTI]

    THERMAL-HYDRAULIC STUDIES IN SUPPORT OF THE ARIES-CS T-TUBE DIVERTOR DESIGN S. I. ABDEL-KHALIK,*a L and engineering optimization. This paper focuses on the thermal-hydraulic analyses and experiments performed

  18. The Effect of Proppant Size and Concentration on Hydraulic Fracture Conductivity in Shale Reservoirs

    E-Print Network [OSTI]

    Kamenov, Anton

    2013-04-11T23:59:59.000Z

    Hydraulic fracture conductivity in ultra-low permeability shale reservoirs is directly related to well productivity. The main goal of hydraulic fracturing in shale formations is to create a network of conductive pathways in the rock which increase...

  19. Analytical methods for estimating saturated hydraulic conductivity in a tile-drained field

    E-Print Network [OSTI]

    Selker, John

    Analytical methods for estimating saturated hydraulic conductivity in a tile-drained field David E; Saturated hydraulic conductivity; Field scale; Tile drains; Water table 1. Introduction The use of spatially

  20. A New Analytical Method to Quantify Residual Fluid Cleanup in Hydraulic Fractures

    E-Print Network [OSTI]

    Zarrin, Tahira

    2014-04-17T23:59:59.000Z

    hydraulic fracturing fluid has always been a major issue, and is believed to drastically undermine the performance of hydraulically fractured wells. Several attempts have been made to quantify the damage associated with residual fluid, with varying level...

  1. Hydraulic constraints on photosynthesis in subtropical evergreen broad leaf forest and pine woodland trees of the Florida Everglades

    E-Print Network [OSTI]

    Jones, Tim J.; Luton, Corene D.; Santiago, Louis S.; Goldstein, Guillermo

    2010-01-01T23:59:59.000Z

    PAPER Hydraulic constraints on photosynthesis in subtropicalwater transport and photosynthesis represents the trade-offwater transport and photosynthesis to evaluate hydraulic

  2. COMPARISON OF PNEUMATIC AND HYDRAULIC FRACTURING FOR EMPLACEMENT OF TREATMENT MATERIALS IN LOW

    E-Print Network [OSTI]

    Mark Strong; Craig Sprinkle; Denis Ewing

    , Georgia to evaluate the performance of pneumatic and hydraulic frac-turing for emplacement of in situ

  3. Engine having hydraulic and fan drive systems using a single high pressure pump

    DOE Patents [OSTI]

    Bartley, Bradley E. (Manito, IL); Blass, James R. (Bloomington, IL); Gibson, Dennis H. (Chillicothe, IL)

    2000-01-01T23:59:59.000Z

    An engine comprises a hydraulic system attached to an engine housing that includes a high pressure pump and a hydraulic fluid flowing through at least one passageway. A fan drive system is also attached to the engine housing and includes a hydraulic motor and a fan which can move air over the engine. The hydraulic motor includes an inlet fluidly connected to the at least one passageway.

  4. Microseismic mapping of a Cotton Valley hydraulic fracture using decimated downhole arrays J.T. Rutledge

    E-Print Network [OSTI]

    Microseismic mapping of a Cotton Valley hydraulic fracture using decimated downhole arrays J three hydraulic fracture operations in the Cotton Valley gas field of East Texas. Two 48-level, 3 a consortia of operators and service companies conducted an extensive hydraulic fracture imaging demonstration

  5. Surrogate-based optimization of hydraulic fracturing in pre-existing fracture networks

    E-Print Network [OSTI]

    Lu, Zhiming

    Surrogate-based optimization of hydraulic fracturing in pre-existing fracture networks Mingjie Chen Keywords: Hydraulic fracturing Fractal dimension Surrogate model Optimization Global sensitivity a b s t r a c t Hydraulic fracturing has been used widely to stimulate production of oil, natural gas

  6. 2006 GeoX Conference, pages 1 to 6 Characterisation of hydraulic fractures in

    E-Print Network [OSTI]

    2006 GeoX Conference, pages 1 to 6 Characterisation of hydraulic fractures in limestones using X, France Jacques.Desrues@hmg.inpg.fr ABSTRACT: Hydraulic tension fractures were produced in porous, hydraulic fracture, permeability tensor MOTS-CLÃ?S: microtomographie, fracturation hydraulique, tenseur de

  7. Implicit level set schemes for modeling hydraulic fractures using the Elizaveta Gordeliy, Anthony Peirce

    E-Print Network [OSTI]

    Peirce, Anthony

    Implicit level set schemes for modeling hydraulic fractures using the XFEM Elizaveta Gordeliy Copyright Ã? 2013 Published by Elsevier B.V. All rights reserved. 1. Introduction Hydraulic fractures (HF form 13 July 2013 Accepted 27 July 2013 Available online 20 August 2013 Keywords: XFEM Hydraulic

  8. Enrichment strategies and convergence properties of the XFEM for hydraulic fracture problems

    E-Print Network [OSTI]

    Peirce, Anthony

    Enrichment strategies and convergence properties of the XFEM for hydraulic fracture problems Finite Ele- ment Method (XFEM) for modeling hydraulic fractures (HF), two classes of boundary value energy, is not suitable for modeling hydraulic fractures in which the uid and the fracture fronts

  9. A Hybrid, Neuro-Genetic Approach to Hydraulic Fracture Treatment Design and Optimization

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    SPE 36602 A Hybrid, Neuro-Genetic Approach to Hydraulic Fracture Treatment Design and Optimization and novel methodology for optimal design of hydraulic fracture treatments in a gas storage field. What makes very little (almost none) reservoir data availability. Lack of engineering data for hydraulic fracture

  10. A model for turbulent hydraulic fracture and application to crack propagation at glacier beds

    E-Print Network [OSTI]

    Click Here for Full Article A model for turbulent hydraulic fracture and application to crack suggest that fluidinduced hydraulic fracture of an ice sheet from its bed sometimes occurs quickly. Citation: Tsai, V. C., and J. R. Rice (2010), A model for turbulent hydraulic fracture and application

  11. Spatial model coupling -an efficient scheme to combine hydraulic and geomechanic simulations

    E-Print Network [OSTI]

    Cirpka, Olaf Arie

    Spatial model coupling - an efficient scheme to combine hydraulic and geomechanic simulations present a spatial coupling approach with two subdomains [1]: Hydro-geomechanical model full model approach-field (geomechanics are neglected) hydro-geomechanical subdomain el2p model hydraulic subdomain 2p model hydraulic

  12. Nonlinear State Space Model of a Hydraulic Wind Power Transfer Masoud Vaezi1

    E-Print Network [OSTI]

    Zhou, Yaoqi

    state space representation of a hydraulic wind energy transfer for a single wind turbine systemNonlinear State Space Model of a Hydraulic Wind Power Transfer Masoud Vaezi1 , Majid Deldar1 1, IUPUI. Gearless hydraulic wind power systems are considered as nonlinear models because of some discrete

  13. Optimal Design of Power-Split Transmissions for Hydraulic Hybrid Passenger Vehicles

    E-Print Network [OSTI]

    Li, Perry Y.

    Optimal Design of Power-Split Transmissions for Hydraulic Hybrid Passenger Vehicles Kai Loon Cheong, Perry Y. Li and Thomas R. Chase Abstract-- Hydraulic hybrid vehicles are inherently power dense. Power and input coupled power-split configurations. Keywords: Hybrid vehicles, hydraulics, power-split, engine

  14. SOFT SWITCHING APPROACH TO REDUCING TRANSITION LOSSES IN AN ON/OFF HYDRAULIC VALVE

    E-Print Network [OSTI]

    Li, Perry Y.

    SOFT SWITCHING APPROACH TO REDUCING TRANSITION LOSSES IN AN ON/OFF HYDRAULIC VALVE Michael B/off controlled hydraulic system is proposed. There has been a growing interest in the use of on/off valves to control hydraulic systems as a means of improving system efficiency. While on/off valves are efficient

  15. Integrated mechatronic design of precision and energy saving electro-hydraulic systems

    E-Print Network [OSTI]

    Yao, Bin

    - 360 - Integrated mechatronic design of precision and energy saving electro-hydraulic systems Bin less energy consumption are the goals for the design of any industrial systems including electro-hydraulics on the precision and energy saving control of electro-hydraulic systems. Specifically, instead of the traditional

  16. HYDRAULIC CONDUCTIVITY ESTIMATION IN PARTIALLY SATURATED SOILS USING THE ADJOINT METHOD

    E-Print Network [OSTI]

    Efendiev, Yalchin

    HYDRAULIC CONDUCTIVITY ESTIMATION IN PARTIALLY SATURATED SOILS USING THE ADJOINT METHOD J. SANTOS for the estimation of the saturated hydraulic conductivity k in a partially saturated soil Q is proposed. Groundwater exam- ple showing the implementation of the algorithm to estimate the saturated hydraulic conductivity

  17. Analysis of hydraulic tomography using temporal moments of drawdown recovery data

    E-Print Network [OSTI]

    Daniels, Jeffrey J.

    Analysis of hydraulic tomography using temporal moments of drawdown recovery data Junfeng Zhu 2006. [1] Transient hydraulic tomography (THT) is a potentially cost-effective and high- resolution technique for mapping spatial distributions of the hydraulic conductivity and specific storage in aquifers

  18. Study on the hydraulic conductivity of Boom clay1 Yong-Feng Deng1, 2

    E-Print Network [OSTI]

    Boyer, Edmond

    1 Study on the hydraulic conductivity of Boom clay1 2 Yong-Feng Deng1, 2 , Anh-Minh Tang2 , Yu Geotechnical Journal 48 (2011) 1461-1470" DOI : 10.1139/T11-048 #12;2 Abstract1 The hydraulic conductivity. Experimental results show that the hydraulic conductivity3 is mainly governed by the soil porosity

  19. APS/123-QED Hydraulic Flow through a Channel Contraction: Multiple Steady States

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    APS/123-QED Hydraulic Flow through a Channel Contraction: Multiple Steady States Benjamin Akers with a complex hydraulic jump in the contraction occurring in a small section of the bc/b0 and Froude number parameter plane. One- dimensional hydraulic theory provides a comprehensive leading-order approximation

  20. A Hydraulic Capture Application for Optimal Remediation Design K. R. Fowlera

    E-Print Network [OSTI]

    1 A Hydraulic Capture Application for Optimal Remediation Design K. R. Fowlera , C. T. Kelley b , C Carolina Chapel Hill, NC 27599-7400, USA The goal of a hydraulic capture model for remediation purposes is desirable and often influences the choice of solution method. In this paper we present two hydraulic capture

  1. Non-Invasive Measurement of Heartbeat with a Hydraulic Bed Sensor

    E-Print Network [OSTI]

    He, Zhihai "Henry"

    Non-Invasive Measurement of Heartbeat with a Hydraulic Bed Sensor Progress, Challenges}@mail.missouri.edu, SkubicM@missouri.edu Abstract--A hydraulic bed sensor has been developed to non and development of the system. Keywords--hydraulic bed sensor; eldercare monitoring; ballistocardiography I

  2. Equivalent hydraulic conductivity of an experimental stratigraphy: Implications for basin-scale flow

    E-Print Network [OSTI]

    Gable, Carl W.

    Equivalent hydraulic conductivity of an experimental stratigraphy: Implications for basin-scale groundwater flow models are the estimation of representative hydraulic conductivity for the model units. In this study, high-resolution, fully heterogeneous basin-scale hydraulic conductivity map is generated

  3. 1 Estimating aquifer hydraulic properties from the inversion of surface 2 Streaming Potential (SP) anomalies

    E-Print Network [OSTI]

    Sailhac, Pascal

    1 Estimating aquifer hydraulic properties from the inversion of surface 2 Streaming Potential (SP with the geometry of the water table. It follows that 11 SP measurements can be used to estimate aquifer hydraulic and found that we 14 are able to estimate the hydraulic conductivity and the depth 15 and the thickness

  4. Complex hydraulic and substrate variables limit freshwater mussel species richness and abundance

    E-Print Network [OSTI]

    Vaughn, Caryn

    Complex hydraulic and substrate variables limit freshwater mussel species richness and abundance. We examined how substrate and complex hydraulic variables limit the distribution of freshwater mussels. We sampled mussels and measured substrate and hydraulic variables (at low and high flows) at 6

  5. Combining hydraulic knowledge and uncertain gaugings in the estimation of hydrometric rating curves: A Bayesian approach

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Combining hydraulic knowledge and uncertain gaugings in the estimation of hydrometric rating curves HHLY, Hydrology-Hydraulics 5 rue de la Doua CS70077 69626 Villeurbanne cedex, France bCETE Ile analysis of rating curves arises from the quantitative as- sessment of (i) the hydraulic controls

  6. Variation in hydraulic conductivity of mangroves: influence of species, salinity, and nitrogen and phosphorus availability

    E-Print Network [OSTI]

    Ling, Sharon Ewe Mei

    Variation in hydraulic conductivity of mangroves: influence of species, salinity, and nitrogen identity and variation in salinity and nutrient availability influence the hydraulic conductivity of mangroves. Using a fertilization study of two species in Florida, we found that stem hydraulic conductivity

  7. Transient effective hydraulic conductivities under slowly and rapidly varying mean gradients in bounded three-

    E-Print Network [OSTI]

    Tartakovsky, Daniel M.

    Transient effective hydraulic conductivities under slowly and rapidly varying mean gradients it Darcian in real or transformed domains. Each such situation gives rise to an effective hydraulic-time. In this paper we develop first-order analytical expressions for effective hydraulic conductivity under three

  8. Weakly Dispersive Hydraulic Flows in a Contraction -Parametric Solutions and Linear Stability

    E-Print Network [OSTI]

    Ee, Bernard Kuowei

    Weakly Dispersive Hydraulic Flows in a Contraction - Parametric Solutions and Linear Stability typically results is a transition of flow characteristics within the contraction yielding hydraulic flows of the contraction. As considered here, a hydraulic solution is generally one where the fluid response is a function

  9. Variation of hydraulic conductance of some adult conifers under natural conditions

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Variation of hydraulic conductance of some adult conifers under natural conditions A. Granier, N; in the liquid phase, the flow depends upon water potential gradients and hydraulic conductance from the soil present here some evaluations of hydraulic conductance of trees growing under natural conditions. Data

  10. Change in the hydraulic properties of a Brazilian clay Ferralsol on clearing for pasture

    E-Print Network [OSTI]

    Boyer, Edmond

    Change in the hydraulic properties of a Brazilian clay Ferralsol on clearing for pasture L. C 80 to 300 m in size. The aim of this study was to analyze how the hydraulic properties of a clay retention properties were determined by using pressure cell equipment. We determined the saturated hydraulic

  11. Hydraulic adjustment of Scots pine across Europe J. Martnez-Vilalta1,2

    E-Print Network [OSTI]

    Mencuccini, Maurizio

    Research Hydraulic adjustment of Scots pine across Europe J. Martínez-Vilalta1,2 , H. Cochard3), 8903 Birmensdorf, Switzerland Summary · The variability of branch-level hydraulic properties, xylem anatomy, sapwood- and leaf-specific hydraulic conductivity (KS and KL), vulnerability to embolism

  12. The Design of an Adaptive Multiple Agent ConstraintBased Controller for a Complex Hydraulic System

    E-Print Network [OSTI]

    Bahler, Dennis R.

    The Design of an Adaptive Multiple Agent Constraint­Based Controller for a Complex Hydraulic System­order predicate calculus (FOPC) language applied in a complex hydraulic system are presented. The concept an update strategy which makes a real time adaptive hydraulic control for all 20 cities possible. 1

  13. Upscaling of soil hydraulic properties for steady state evaporation and infiltration

    E-Print Network [OSTI]

    Mohanty, Binayak P.

    Upscaling of soil hydraulic properties for steady state evaporation and infiltration Jianting Zhu September 2002. [1] Estimation of effective/average soil hydraulic properties for large land areas and guidelines for upscaling soil hydraulic properties in an areally heterogeneous field. In this study, we

  14. International Journal of Rock Mechanics & Mining Sciences 44 (2007) 739757 Computer simulation of hydraulic fractures

    E-Print Network [OSTI]

    Peirce, Anthony

    2007-01-01T23:59:59.000Z

    of hydraulic fractures J. Adachia , E. Siebritsb , A. Peircec,Ã, J. Desrochesd a Schlumberger Data of hydraulic fracturing models for use in the petroleum and other industries. We discuss scaling laws and the propagation regimes that control the growth of hydraulic fractures from the laboratory to the field scale. We

  15. Plant, Cell and Environment {^996) 19, 939-948 Developmental patterns of above-ground hydraulic

    E-Print Network [OSTI]

    Mencuccini, Maurizio

    Plant, Cell and Environment {^996) 19, 939-948 Developmental patterns of above-ground hydraulic, Mayfield Road, EH93JU, UK ABSTRACT Hydraulic resistance to water flow was measured in branches and stems hydraulic conductance than branches of the same diameter at tbe tree top. Within branches, most

  16. HYPower Hydraulic Power Supply Unit University of Saskatchewan -Mechanical Engineering Fluid Power and Controls

    E-Print Network [OSTI]

    Saskatchewan, University of

    HYPower Hydraulic Power Supply Unit University of Saskatchewan - Mechanical Engineering ­ Fluid Power and Controls ID: FP0002 Rev: 002 Date: May 31, 2010 Page: 1 of 7 Hydraulic Power Supply (HYPower-5462 Secondary Contact: #12;HYPower Hydraulic Power Supply Unit University of Saskatchewan - Mechanical

  17. Hydraulic barrier design and applicability for managing the risk of CO2 leakage from deep saline

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Hydraulic barrier design and applicability for managing the risk of CO2 leakage from deep saline modifying the leak hydraulic properties (e.g. permeability) may be unfeasible. An appealing option.e. by creating a hydraulic barrier. The present article presents and discusses the operational and strategic

  18. URTeC 1620617 Thermal Shock in Reservoir Rock Enhances the Hydraulic

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    URTeC 1620617 Thermal Shock in Reservoir Rock Enhances the Hydraulic Fracturing of Gas Shales Saeid through strain and stress. As the temperature diffuses from hydraulic fracture into reservoir the rock matrix beyond hydraulic fracturing stimulation by cooling down the rock. The physics

  19. Hydraulic limits on maximum plant transpiration and the emergence of the safetyefficiency trade-off

    E-Print Network [OSTI]

    Jackson, Robert B.

    Hydraulic limits on maximum plant transpiration and the emergence of the safety­efficiency trade.12126 Key words: hydraulic limitation, safety­ efficiency trade-off, soil­plant­atmosphere model, trait hydraulics constrain ecosystem productivity by setting physical limits to water transport and hence carbon

  20. ORIGINAL ARTICLE Cell-to-cell pathway dominates xylem-epidermis hydraulic

    E-Print Network [OSTI]

    Holbrook, N. Michele

    ORIGINAL ARTICLE Cell-to-cell pathway dominates xylem-epidermis hydraulic connection the hydraulic linkage between xylem and epidermis, epidermal cell turgor pressure (Pt) in leaves of Tradescantia- tutes a significant part of the leaf hydraulic path from xylem to epidermis. Furthermore, perfusion of H

  1. Engine with hydraulic fuel injection and ABS circuit using a single high pressure pump

    DOE Patents [OSTI]

    Bartley, Bradley E. (Manito, IL); Blass, James R. (Bloomington, IL); Gibson, Dennis H. (Chillicothe, IL)

    2001-01-01T23:59:59.000Z

    An engine system comprises a hydraulically actuated fuel injection system and an ABS circuit connected via a fluid flow passage that provides hydraulic fluid to both the fuel injection system and to the ABS circuit. The hydraulically actuated system includes a high pressure pump. The fluid control passage is in fluid communication with an outlet from the high pressure pump.

  2. USE OF GCLS TO CONTROL LEAKAGE THROUGH GEOMEMBRANE DEFECTS UNDER HIGH HYDRAULIC HEADS

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    USE OF GCLS TO CONTROL LEAKAGE THROUGH GEOMEMBRANE DEFECTS UNDER HIGH HYDRAULIC HEADS Christine T liners under conditions representative of dams (i.e., high hydraulic heads). Specifically, the objective of interface contact, hydraulic head, and GCL hydration procedures on the leakage rate were considered

  3. Effective Unsaturated Hydraulic Conductivity for Computing One-Dimensional Flow in Heterogeneous Porous Media

    E-Print Network [OSTI]

    Effective Unsaturated Hydraulic Conductivity for Computing One-Dimensional Flow in Heterogeneous-dimensional unsaturated flow in vertically stratified porous media are examined. Saturated hydraulic conductivity and the alpha parameter of the exponential hydraulic conductivity function were assumed to vary from soil layer

  4. APS/123-QED Hydraulic Flow through a Contraction: Multiple Steady States

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    APS/123-QED Hydraulic Flow through a Contraction: Multiple Steady States Benjamin Akers Department states, as well as a steady reservoir with a two-dimensional hydraulic jump in the contraction occur-dimensional hydraulic theory provides a comprehensive leading-order explanation, but quadratic friction is re- quired

  5. On the Relation Between Steep Monoclinal Flexure Zones and Steep Hydraulic Gradients

    E-Print Network [OSTI]

    Lyakhovsky, Vladimir

    On the Relation Between Steep Monoclinal Flexure Zones and Steep Hydraulic Gradients by Y. Yechieli1, U. Kafri2, S. Wollman2, V. Lyakhovsky2, and R. Weinberger2 Abstract Steep hydraulic gradients of the hydraulic conductivity, which is responsible for the steep gradients, has seldom been studied. We present

  6. Comparison of Hydraulic-Burst and Ball-on-Ring Tests for Measuring Biaxial Strength

    E-Print Network [OSTI]

    Matthewson, M. John

    Comparison of Hydraulic-Burst and Ball-on-Ring Tests for Measuring Biaxial Strength Anupa Simpatico­0909 The statistics of failure of the hydraulic-burst (HB) test were compared with those of the ball-on-ring (BOR tests are ball-on-ring (BOR) and ring-on-ring (ROR); however, hydraulic-burst (HB) tests also have

  7. Centre Hydraulic Power Supply Unit University of Saskatchewan -Mechanical Engineering Fluid Power and Controls

    E-Print Network [OSTI]

    Saskatchewan, University of

    Centre Hydraulic Power Supply Unit University of Saskatchewan - Mechanical Engineering ­ Fluid Power and Controls ID: FP0003 Rev: 001 Date: May 31, 2010 Page: 1 of 7 Centre Hydraulic Power Supply;Centre Hydraulic Power Supply Unit University of Saskatchewan - Mechanical Engineering ­ Fluid Power

  8. East Hydraulic Power Supply Unit University of Saskatchewan -Mechanical Engineering Fluid Power and Controls

    E-Print Network [OSTI]

    Saskatchewan, University of

    East Hydraulic Power Supply Unit University of Saskatchewan - Mechanical Engineering ­ Fluid Power and Controls ID: FP0004 Rev: 001 Date: May 31, 2010 Page: 1 of 7 East Hydraulic Power Supply and Test Bench. Approved By: Primary Contact: Doug Bitner Rm: 1B15.1 966-5462 Secondary Contact: #12;East Hydraulic Power

  9. Effective hydraulic parameters for steady state vertical flow in heterogeneous soils

    E-Print Network [OSTI]

    Mohanty, Binayak P.

    Effective hydraulic parameters for steady state vertical flow in heterogeneous soils Jianting Zhu August 2003. [1] In hydroclimate and land-atmospheric interaction models, effective hydraulic properties are needed at large grid scales. In this study, the effective soil hydraulic parameters of the areally

  10. Delft Hydraulic's Large Wind-Wave Flume Paul van Vliet 1

    E-Print Network [OSTI]

    Jaehne, Bernd

    499 Delft Hydraulic's Large Wind-Wave Flume Paul van Vliet 1 , Frank Hering 2 , and Bernd J¨ahne 2,3 1 Waterloopkundig Laboratorium, Delft Hydraulics Laboratory Rotterdamseweg 185, NL-2692 HD Delft in the seventies, Delft Hydraulics large wind wave flume was totally overhauled to fit the needs of scientists

  11. Hydraulic architecture and tracheid allometry in mature Pinus palustris and Pinus elliottii trees

    E-Print Network [OSTI]

    Martin, Timothy

    Hydraulic architecture and tracheid allometry in mature Pinus palustris and Pinus elliottii trees C and better-drained micro- sites than SL. The hydraulic architecture and tracheid dimen- sions of roots, trunk but weak trade-off between water conduction efficiency and safety. Tracheid hydraulic diameter (Dh

  12. Summary We investigated hydraulic conductance charac-teristics and associated dry matter production and distribution

    E-Print Network [OSTI]

    DeJong, Theodore

    Summary We investigated hydraulic conductance charac- teristics and associated dry matter') vigor rootstock. `K146-43' and `Hiawatha' rootstocks had 27 and 52% lower mean leaf-specific hydraulic and rootstock, which may be a compensatory response to the differences in leaf specific hydraulic conduc- tance

  13. DETERMINATION OF SOIL HYDRAULIC PROPERTIES IN A PART OF HINDON RIVER CATCHMENT USING SOILPROP SOFTWARE

    E-Print Network [OSTI]

    Kumar, C.P.

    DETERMINATION OF SOIL HYDRAULIC PROPERTIES IN A PART OF HINDON RIVER CATCHMENT USING SOILPROP) and unsaturated hydraulic conductivity (K). To model the retention and movement of water and chemicals and hydraulic conductivity. It is often convenient to represent these functions by means of relatively simple

  14. Characterizing hydraulic properties of filter material of a Vertical Flow1 Constructed Wetland2

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Characterizing hydraulic properties of filter material of a Vertical Flow1 Constructed Wetland2 A Characterizing the hydraulic properties of filter material used in a vertical flow11 constructed wetland (VFCW of porous mineral material and13 organic matter that makes hydraulic characterization a difficult task. Here

  15. Hydraulic Mechanisms of the Deterioration of Concrete Sleeper Rail Seats , R. Kernes

    E-Print Network [OSTI]

    Barkan, Christopher P.L.

    Hydraulic Mechanisms of the Deterioration of Concrete Sleeper Rail Seats J. Zeman 2 , R. Kernes 1 to have five potential mechanisms, and this research investigates three of them: hydraulic pressure cracking, hydro-abrasive erosion, and abrasion. In order to investigate the two hydraulic-driven mechanisms

  16. Hydraulic Properties of Rice and the Response of Gas Exchange to Water Stress1

    E-Print Network [OSTI]

    Stiller, Volker

    Hydraulic Properties of Rice and the Response of Gas Exchange to Water Stress1 Volker Stiller*, H.R.L.) We investigated the role of xylem cavitation, plant hydraulic conductance, and root pressure-specific photosynthetic rate, leaf diffusive conductance, and soil-leaf hydraulic conductance that were associated

  17. A Model-Based Impedance Control Scheme for High-Performance Hydraulic Joints

    E-Print Network [OSTI]

    Papadopoulos, Evangelos

    A Model-Based Impedance Control Scheme for High-Performance Hydraulic Joints Glen Bilodeau1, Greece Abstract Impedance control of a hydraulic servoactuator joint system is discussed in this paper individually. Due to nonlinear properties of hydraulic actuators, impedance control is difficult. The control

  18. Self-similar solutions for a fractional thin film equation governing hydraulic fractures

    E-Print Network [OSTI]

    Boyer, Edmond

    Self-similar solutions for a fractional thin film equation governing hydraulic fractures C. Imbert equation governing hydraulic fractures are constructed. One of the boundary con- ditions, which accounts, 35R11, 35C06 Keywords: Hydraulic fractures, higher order equation, thin films, fractional Laplacian

  19. Hydraulic Habitat Model Comparison_12_03_09 Desiree Tullos and Beth Copeland

    E-Print Network [OSTI]

    Tullos, Desiree

    Hydraulic Habitat Model Comparison_12_03_09 Desiree Tullos and Beth Copeland Review of Hydraulic;Hydraulic Habitat Model Comparison_12_03_09 Desiree Tullos and Beth Copeland Name PHABSIM Spatial scale and Observations on Flow Determination in New Zealand Regulated Streams: Advances in Ecology. Plenum Press, New

  20. Biorheology 44 (2007) 303317 303 The hydraulic conductivity of MatrigelTM

    E-Print Network [OSTI]

    Ottino, Julio M.

    2007-01-01T23:59:59.000Z

    Biorheology 44 (2007) 303­317 303 IOS Press The hydraulic conductivity of MatrigelTM William J. Mc the specific hydraulic conductivity (K) of MatrigelTM at 1% and 2% concentrations as a function of perfusion to determining the hydraulic conductivity of these membranes. The major components of MatrigelTM are laminin

  1. Downstream Hydraulic Geometry of Alluvial Channels Jong-Seok Lee, A.M.ASCE1

    E-Print Network [OSTI]

    Julien, Pierre Y.

    Downstream Hydraulic Geometry of Alluvial Channels Jong-Seok Lee, A.M.ASCE1 ; and Pierre Y. Julien. A larger database for the downstream hydraulic geometry of alluvial channels is examined through with meandering to braided planform geometry. The five parameters describing downstream hydraulic geometry are

  2. Cartesian Cut Cell Two-Fluid Solver for Hydraulic Flow Problems

    E-Print Network [OSTI]

    Ingram, David

    Cartesian Cut Cell Two-Fluid Solver for Hydraulic Flow Problems L. Qian1 ; D. M. Causon2 ; D. M. Ingram3 ; and C. G. Mingham4 Abstract: A two-fluid solver which can be applied to a variety of hydraulic with a sloping beach is also calculated to demonstrate the applicability of the method to real hydraulic problems

  3. Calibration of hydraulic and tracer tests in fractured media

    E-Print Network [OSTI]

    Politècnica de Catalunya, Universitat

    Calibration of hydraulic and tracer tests in fractured media represented by a DFN Model L. D. Donado, X. Sanchez-Vila, E. Ruiz* & F. J. Elorza** * Enviros Spain S.L. ** UPM #12;Fractured Media Water flows through fractures (matrix basically impervious ­ though relevant to transport) Fractures at all

  4. Scanning electron microscopy imaging of hydraulic cement microstructure

    E-Print Network [OSTI]

    Bentz, Dale P.

    Scanning electron microscopy imaging of hydraulic cement microstructure by Paul Stutzman Building Reprinted from Cement and Concrete Composites, Vol. 26, No. 8, 957-966 pp., November 2004. NOTE: This paper;Available online at www.sciencedirect.com SCIENCE@OIRECT@ Cement & Concrete CompositesELSEVIER Cement

  5. PENN STATE and "GREEN" HYDRAULIC FLUIDS A Fact Sheet

    E-Print Network [OSTI]

    Lee, Dongwon

    complicated and involve motors, actuators, gear, vane, and piston pumps to convert hydraulic power into useful lubricate, transfer heat, and be compatible with other materials such as gaskets, seals, and metal several decades will be declining, while alternative sources of fuels and lubricants increase. The U

  6. GEOL440, GEOL524 Sedimentary Geology: Hydraulic Fracturing Seminar

    E-Print Network [OSTI]

    Nickrent, Daniel L.

    -directed seminar class in which we will investigate the issues surrounding hydraulic fracturing (fracking of fracking, Illinois law, and the economic, environmental and political issues involved in this petroleum on the state of the science of fracking. Course Objectives Upon completion of this course, students

  7. Potential Contaminant Pathways from Hydraulically Fractured Shale to Aquifers

    E-Print Network [OSTI]

    that fracking the shale could reduce that transport time to tens or hundreds of years. Conductive faults to reach a new equilibrium reflecting the significant changes caused by fracking the shale, which could for development. Hydraulic fracturing (fracking, the industry term for the operation; Kramer 2011) loosens

  8. HYDRAULIC FRACTURE MODEL SENSITIVITY ANALYSES OF MASSIVELY STACKED LENTICULAR RESERVOIRS

    E-Print Network [OSTI]

    and 50% of the total cost may be due to the well stimulation treatment. Therefore, there is a need (MWX) site. A geologic characterization of the Mesaverde group established that the production. In common with most tight gas reservoirs, hydraulic stimulation is required to interconnect the dual

  9. Water Use for Hydraulic Fracturing: A Texas Sized Problem?

    E-Print Network [OSTI]

    LeClere, David

    The state of Texas could face a 2.7 trillion gallon shortfall of water by 2060. Hydraulic fracturing (HF) requires large amounts of water for each well. Tax incentives should be offered to companies that substitute brackish groundwater for fresh...

  10. Proportional and Proportional-Integral Controllers for a Nonlinear Hydraulic

    E-Print Network [OSTI]

    De Persis, Claudio

    in a nonlinear hydraulic network of a reduced-size yet meaningful district heating system with two end correspondingly the controllers. In this paper we focus on one of these case studies, a district heating system to the system. Presently district heating systems are designed to meet the needs of a given number of end users

  11. Disturbance Control of the Hydraulic Brake in a Wind Turbine

    E-Print Network [OSTI]

    Yang, Zhenyu

    Disturbance Control of the Hydraulic Brake in a Wind Turbine Frank Jepsen, Anders Søborg brake in a wind turbine. Brake torque is determined by friction coefficient and clamp force; the latter brake is one1 of the two independent brake systems in a wind turbine. As a consequence of the gearing

  12. HYDRAULIC AND PHYSICAL PROPERTIES OF SALTSTONE GROUTS AND VAULT CONCRETES

    SciTech Connect (OSTI)

    Dixon, K; John Harbour, J; Mark Phifer, M

    2008-11-25T23:59:59.000Z

    The Saltstone Disposal Facility (SDF), located in the Z-Area of the Savannah River Site (SRS), is used for the disposal of low-level radioactive salt solution. The SDF currently contains two vaults: Vault 1 (6 cells) and Vault 4 (12 cells). Additional disposal cells are currently in the design phase. The individual cells of the saltstone facility are filled with saltstone. Saltstone is produced by mixing the low-level radioactive salt solution, with blast furnace slag, fly ash, and cement (dry premix) to form a dense, micro-porous, monolithic, low-level radioactive waste form. The saltstone is pumped into the disposal cells where it subsequently solidifies. Significant effort has been undertaken to accurately model the movement of water and contaminants through the facility. Key to this effort is an accurate understanding of the hydraulic and physical properties of the solidified saltstone. To date, limited testing has been conducted to characterize the saltstone. The primary focus of this task was to estimate the hydraulic and physical properties of three types of saltstone and two vault concretes. The saltstone formulations included saltstone premix batched with (1) Deliquification, Dissolution, and Adjustment (DDA) salt simulant (w/pm 0.60), (2) Actinide Removal Process (ARP)/Modular Caustic Side Solvent Extraction Unit (MCU) salt simulant (w/pm 0.60), and (3) Salt Waste Processing Facility (SWPF) salt simulant (w/pm 0.60). The vault concrete formulations tested included the Vault 1/4 concrete and two variations of the Vault 2 concrete (Mix 1 and Mix 2). Wet properties measured for the saltstone formulations included yield stress, plastic viscosity, wet unit weight, bleed water volume, gel time, set time, and heat of hydration. Hydraulic and physical properties measured on the cured saltstone and concrete samples included saturated hydraulic conductivity, moisture retention, compressive strength, porosity, particle density, and dry bulk density. These properties were determined following a minimum 28 day curing period. Additional testing of the three saltstone formulations was conducted following a minimum 90 day curing period. The compressive strength of each saltstone and concrete material was measured at approximately 14, 28, 56, and 90 days. Recommended hydraulic property values for each saltstone grout and the vault concretes are provided. The hydraulic properties provided for each material include the saturated hydraulic conductivity, dry bulk density, particle density, and porosity. In addition, water retention data are presented for each material along with the van Genuchten transport parameters as determined using the RETC code.

  13. Environmental Change Institute Environmental Change Institute

    E-Print Network [OSTI]

    Oxford, University of

    Environmental Change Institute 2012/13 eci Environmental Change Institute #12;ii Environmental 06 Educating environmental leaders 08 Centre for interdisciplinary doctoral training 10 A thriving, Dumfriesshire (ECI) #12;1 The Environmental Change Institute has 21 years' experience in helping governments

  14. Institute for ADVANCED STUDY

    E-Print Network [OSTI]

    OF EVENTS 91 · REPORT OF THE INSTITUTE LIBRARIES 93 · INSTITUTE FOR ADVANCED STUDY/PARK CITY MATHEMATICS. The Institute for Advanced Study has sustained this founding principle for more than sixty-five years

  15. Institute /or ADVANCED STUDY

    E-Print Network [OSTI]

    OF THE INSTITUTE LIBRARIES 63 INSTITUTE FOR ADVANCED STUDY/PARK CITY MATHEMATICS INSTITUTE 66 · MENTORING PROGRAM sustained and has yielded an unsurpassed record of definitive scholarship. Although small in scale

  16. A model of the large hydraulic gradient at Yucca Mountain, Nevada Test Site, based on hydraulic conductivity contrasts between Cenozoic and Paleozoic rocks

    E-Print Network [OSTI]

    Strom, Eric William

    1993-01-01T23:59:59.000Z

    A MODEL OF THE LARGE HYDRAULIC GRADIENT AT YUCCA MOUNTAIN, NEVADA TEST SITE, BASED ON HYDRAULIC CONDUCTIVITY CONTRASTS BETWEEN CENOZOIC AND PALEOZOIC ROCKS A Thesis ERIC WILLIAM STROM Submitted to the Offic of Graduate Studies of Texas A.... 4m W&~~ &&go~'~o~~i gp ??g Y, ) 4r y. odtli' ~ 6. A MODEL OF THE LARGE HYDRAULIC GRADIENT AT YUCCA MOUNTAIN, NEVADA TEST SITE, BASED ON HYDRAULIC CONDUCTIVITY CONTRASTS BETWEEN CENOZOIC AND PALEOZOIC ROCKS A Thesis ERIC WILLIAM STROM...

  17. Prediction of effects of hydraulic fracturing using reservoir and well flow simulation

    SciTech Connect (OSTI)

    Mineyuki Hanano; Tayuki Kondo

    1992-01-01T23:59:59.000Z

    This paper presents a method to predict and evaluate effects of hydraulic fracturing jobs by using reservoir and well flow numerical simulation. The concept of the method i5 that steam production rate at the operating well head pressure is predicted with different fracture conditions which would be attained by the hydraulic fracturing jobs. Then, the effects of the hydraulic fracturing is evaluated by comparing the predicted steam production rate and that before the hydraulic fracturing. This course of analysis will suggest how large fracture should be created by the fracturing job to attain large enough increase in steam production at the operating condition and the best scheme of the hydraulic fracturing job.

  18. Reply: Davies et al. (2012), Hydraulic fractures: How far can they go? Richard J. Davies a,*, Gillian R. Foulger a

    E-Print Network [OSTI]

    Foulger, G. R.

    2012-01-01T23:59:59.000Z

    propagating stimulated hydraulic fractures, gener- ated by fracking operations for gas and oil exploitation

  19. Hydraulic engine valve actuation system including independent feedback control

    DOE Patents [OSTI]

    Marriott, Craig D

    2013-06-04T23:59:59.000Z

    A hydraulic valve actuation assembly may include a housing, a piston, a supply control valve, a closing control valve, and an opening control valve. The housing may define a first fluid chamber, a second fluid chamber, and a third fluid chamber. The piston may be axially secured to an engine valve and located within the first, second and third fluid chambers. The supply control valve may control a hydraulic fluid supply to the piston. The closing control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the second fluid chamber to the supply control valve. The opening control valve may be located between the supply control valve and the second fluid chamber and may control fluid flow from the supply control valve to the second fluid chamber.

  20. Thermal Hydraulic Analysis of HTGR Coupled with Hydrogen Plant

    SciTech Connect (OSTI)

    Chang Oh; Cliff Davis; Robert Barner; Paul Pickard

    2006-06-01T23:59:59.000Z

    The US Department of Energy is investigating the use of high-temperature gas-cooled reactors (HTGR) to produce electricity and hydrogen. Although the hydrogen production processes using the nuclear energy are in an early stage of development, coupling hydrogen plant to HTGR requires both efficient heat transfer and adequate separation of the facilities to assure that off-normal events in the production facility do not impact the nuclear plant. In anticipation of the design, development and procurement of an advanced power conversion system for HTGR, this study was initiated to identify the major design and technology options and their tradeoffs in the evaluation of power conversion system (PCS) coupled to hydrogen plant. In this study, we investigated a number of design configurations and performed thermal hydraulic analyses using various working fluids and various conditions. This paper includes a portion of thermal hydraulic results based on a direct cycle and a parallel intermediate heat exchanger (IHX) configuration option.

  1. A fast direct numerical simulation method for characterising hydraulic roughness

    E-Print Network [OSTI]

    Chung, Daniel; MacDonald, Michael; Hutchins, Nicholas; Ooi, Andrew

    2015-01-01T23:59:59.000Z

    We describe a fast direct numerical simulation (DNS) method that promises to directly characterise the hydraulic roughness of any given rough surface, from the hydraulically smooth to the fully rough regime. The method circumvents the unfavourable computational cost associated with simulating high-Reynolds-number flows by employing minimal-span channels (Jimenez & Moin 1991). Proof-of-concept simulations demonstrate that flows in minimal-span channels are sufficient for capturing the downward velocity shift, that is, the Hama roughness function, predicted by flows in full-span channels. We consider two sets of simulations, first with modelled roughness imposed by body forces, and second with explicit roughness described by roughness-conforming grids. Owing to the minimal cost, we are able to conduct DNSs with increasing roughness Reynolds numbers while maintaining a fixed blockage ratio, as is typical in full-scale applications. The present method promises a practical, fast and accurate tool for character...

  2. Hydraulic impulse generator and frequency sweep mechanism for borehole applications

    DOE Patents [OSTI]

    Kolle, Jack J.; Marvin, Mark H.; Theimer, Kenneth J.

    2006-11-21T23:59:59.000Z

    This invention discloses a valve that generates a hydraulic negative pressure pulse and a frequency modulator for the creation of a powerful, broadband swept impulse seismic signal at the drill bit during drilling operations. The signal can be received at monitoring points on the surface or underground locations using geophones. The time required for the seismic signal to travel from the source to the receiver directly and via reflections is used to calculate seismic velocity and other formation properties near the source and between the source and receiver. This information can be used for vertical seismic profiling of formations drilled, to check the location of the bit, or to detect the presence of abnormal pore pressure ahead of the bit. The hydraulic negative pressure pulse can also be used to enhance drilling and production of wells.

  3. Calcium and sodium bentonite for hydraulic containment applications

    SciTech Connect (OSTI)

    Gleason, M.H. [GeoSyntec Consultants, Columbia, MD (United States); Daniel, D.E. [Univ. of Illinois, Urbana, IL (United States). Dept. of Civil Engineering; Eykholt, G.R. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Civil Engineering

    1997-05-01T23:59:59.000Z

    The hydraulic conductivity of calcium and sodium bentonites was investigated for sand-bentonite mixtures, a thin bentonite layer simulating a geosynthetic clay liner (GCL), and bentonite-cement mixtures simulating backfill for a vertical cutoff wall. The permeant liquids were tap water and distilled water containing 0.25 M calcium chloride. In general, the hydraulic performance of calcium bentonite was not significantly better than the performance of sodium bentonite for either the clay-amended sand or the GCL application, and was substantially worse than the performance of sodium bentonite in the bentonite-cement mixture. A drained angle of internal friction of 21{degree} was measured for calcium bentonite, compared to 10{degree} for sodium bentonite. Except for a larger drained shear strength, no advantage of calcium bentonite over sodium bentonite could be identified from the results of this study.

  4. An investigation of productivity increases from hydraulic fracturing treatments

    E-Print Network [OSTI]

    Boriskie, Robert Joe

    1963-01-01T23:59:59.000Z

    AN INVESTIGATION OF PRODUCTIVITY INCREASES FROM HYDRAULIC FRACTURING TREATMENTS A Thesis b7 Robert Joe Boriskie Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillment of the requirements... Head of Department) August, 1963 1. ABSTRACT 2. INTRODUCTION. TABLE OF CONTENTS PRgB 3. THEORY AND PROCEDURE. 4. DISCUSSION OF RESULTS. . 5. CONCLUSIONS. 6. ACKNOWLEDGEMENT. 7. APPENDIX. 8. REFERENCES. 18 19 20 32 LIST OF FIGURES...

  5. Low permeability gas reservoir production using large hydraulic fractures

    E-Print Network [OSTI]

    Holditch, Stephen A

    1970-01-01T23:59:59.000Z

    extending up to three thousand feet from the producing well. Also, a model simulating a nuclear cavity was designed. This model simulated a well containing an eighty foot radius cavity with a fractured zone of one hundred times the reservoir permeability... of each system was prepared. The results of this study showed that all fractures of greater than one thousand foot radius had greater productivity and greater cumu- lative gas produced than did the nuclear cavity. It appears that large hydraulic...

  6. Hydrology and Hydraulic Properties of a Bedded Evaporite Formation

    SciTech Connect (OSTI)

    BEAUHEIM,RICHARD L.; ROBERTS,RANDALL M.

    2000-11-27T23:59:59.000Z

    The Permian Salado Formation in the Delaware Basin of New Mexico is an extensively studied evaporite deposit because it is the host formation for the Waste Isolation Pilot Plant, a repository for transuranic wastes. Geologic and hydrologic studies of the Salado conducted since the mid-1970's have led to the development of a conceptual model of the hydrogeology of the formation that involves far-field permeability in anhydrite layers and at least some impure halite layers. Pure halite layers and some impure halite layers may not possess an interconnected pore network adequate to provide permeability. Pore pressures are probably very close to lithostatic pressure. In the near field around an excavation, dilation, creep, and shear have created and/or enhanced permeability and decreased pore pressure. Whether flow occurs in the far field under natural gradients or only after some threshold gradient is reached is unknown. If far-field flow does occur, mean pore velocities are probably on the order of a meter per hundreds of thousands to tens of millions of years. Flow dimensions inferred from most hydraulic-test responses are subradial, which is believed to reflect channeling of flow through fracture networks, or portions of fractures, that occupy a diminishing proportion of the radially available space, or through percolation networks that are not ''saturated'' (fully interconnected). This is probably related to the directional nature of the permeability created or enhanced by excavation effects. Inferred values of permeability cannot be separated from their associated flow dimensions. Therefore, numerical models of flow and transport should include heterogeneity that is structured to provide the same flow dimensions as are observed in hydraulic tests. Modeling of the Salado Formation around the WIPP repository should also include coupling between hydraulic properties and the evolving stress field because hydraulic properties change as the stress field changes.

  7. The use of broadband microseisms for hydraulic fracture mapping

    SciTech Connect (OSTI)

    Sleefe, G.E.; Warpinski, N.R.; Engler, B.P.

    1993-08-01T23:59:59.000Z

    When a hydrocarbon reservoir is subjected to a hydraulic fracture treatment, the cracking and slipping of the formation results in the emission of seismic energy. The objective of this study was to determine the advantages of using broadband (100 Hz to 1500 M) microseismic emissions to map a hydraulic fracture treatment. A hydraulic fracture experiment was performed in the Piceance Basin of Western Colorado to induce and record broadband microseismic events. The formation was subjected to four processes; break-down/ballout, step-rate test, KCL mini-fracture, and linear-gel mini-fracture. Broadband microseisms were successfully recorded by a novel three-component wall-locked seismic accelerometer package, placed in an observation well 211 ft (64 m) offset from the treatment well. During the two hours of formation treatment, more than 1200 significant microseismic events were observed. The occurrences of the events strongly correlated with the injection bore-bole pressures during the treatments. Using both hodogram analysis and time of arrival information, estimates of the origination point of the seismic events were computed. A map of the event locations yielded a fracture orientation estimate consistent with the known orientation of the field in the formation. This paper describes the technique for acquiring and analyzing broadband microseismic events and illustrate how the new broadband approach can enhance signal detectability and event location resolution.

  8. Nanocoatings for High-Efficiency Industrial Hydraulic and Tooling Systems

    SciTech Connect (OSTI)

    Clifton B. Higdon III

    2011-01-07T23:59:59.000Z

    Industrial manufacturing in the U.S. accounts for roughly one third of the 98 quadrillion Btu total energy consumption. Motor system losses amount to 1.3 quadrillion Btu, which represents the largest proportional loss of any end-use category, while pumps alone represent over 574 trillion BTU (TBTU) of energy loss each year. The efficiency of machines with moving components is a function of the amount of energy lost to heat because of friction between contacting surfaces. The friction between these interfaces also contributes to downtime and the loss of productivity through component wear and subsequent repair. The production of new replacement parts requires additional energy. Among efforts to reduce energy losses, wear-resistant, low-friction coatings on rotating and sliding components offer a promising approach that is fully compatible with existing equipment and processes. In addition to lubrication, one of the most desirable solutions is to apply a protective coating or surface treatment to rotating or sliding components to reduce their friction coefficients, thereby leading to reduced wear. Historically, a number of materials such as diamond-like carbon (DLC), titanium nitride (TiN), titanium aluminum nitride (TiAlN), and tungsten carbide (WC) have been examined as tribological coatings. The primary objective of this project was the development of a variety of thin film nanocoatings, derived from the AlMgB14 system, with a focus on reducing wear and friction in both industrial hydraulics and cutting tool applications. Proof-of-concept studies leading up to this project had shown that the constituent phases, AlMgB14 and TiB2, were capable of producing low-friction coatings by pulsed laser deposition. These coatings combine high hardness with a low friction coefficient, and were shown to substantially reduce wear in laboratory tribology tests. Selection of the two applications was based largely on the concept of improved mechanical interface efficiencies for energy conservation. In mobile hydraulic systems, efficiency gains through low friction would translate into improved fuel economy and fewer greenhouse gas emissions. Stationary hydraulic systems, accordingly, would consume less electrical power. Reduced tooling wear in machining operations would translate to greater operating yields, while lowering the energy consumed during processing. The AlMgB14 nanocoatings technology progressed beyond baseline laboratory tests into measurable energy savings and enhancements to product durability. Three key hydraulic markets were identified over the course of the project that will benefit from implementation: industrial vane pumps, orbiting valve-in-star hydraulic motors, and variable displacement piston pumps. In the vane pump application, the overall product efficiency was improved by as much as 11%. Similar results were observed with the hydraulic motors tested, where efficiency gains of over 10% were noted. For variable displacement piston pumps, overall efficiency was improved by 5%. For cutting tools, the most significant gains in productivity (and, accordingly, the efficiency of the machining process as a whole) were associated with the roughing and finishing of titanium components for aerospace systems. Use of the AlMgB14 nanocoating in customer field tests has shown that the coated tools were able to withstand machining rates as high as 500sfm (limited only by the substrate material), with relatively low flank wear when compared to other industrial offerings. AlMgB14 coated tools exhibited a 60% improvement over similarly applied TiAlN thin films. Furthermore, AlMgB14-based coatings in these particular tests lasted twice as long than their TiAlN counterparts at the 500sfm feed rates. Full implementation of the technology into the industrial hydraulic and cutting tool markets equates to a worldwide energy savings of 46 trillion BTU/year by 2030. U.S.-based GHG emissions associated with the markets identified would fall accordingly, dropping by as much as 50,000 tonnes annually.

  9. TU DELFT PROCESS TECHNOLOGY INSTITUTE INSTITUTE LECTURE

    E-Print Network [OSTI]

    Lindken, Ralph

    TU DELFT PROCESS TECHNOLOGY INSTITUTE INSTITUTE LECTURE CHEMICAL REACTORS WITH DIRECT HEATING is in contrast with conventional operation of catalytic reactors, where heat is generally supplied through the reactor wall and unnecessary heating of the fluid phase, catalyst support and reactor materials occur

  10. DIABETES, OBESITY AND METABOLISM INSTITUTE

    E-Print Network [OSTI]

    Engman, David M.

    DIABETES, OBESITY AND METABOLISM INSTITUTE AT NORTHWESTERN MEDICINE THE INSTITUTES AT NORTHWESTERN MEDICINE #12;THE INSTITUTES AT NORTHWESTERN MEDICINE DIABETES, OBESITY AND METABOLISM INSTITUTE AT NORTHWESTERN MEDICINE "As we launch the Diabetes, Obesity and Metabolism Institute at Northwestern Medicine, I

  11. Method and tool for contracting tubular members by electro-hydraulic forming before hydroforming

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich (Beverly Hills, MI)

    2011-03-15T23:59:59.000Z

    A tubular preform is contracted in an electro-hydraulic forming operation. The tubular preform is wrapped with one or more coils of wire and placed in a chamber of an electro-hydraulic forming tool. The electro-hydraulic forming tool is discharged to form a compressed area on a portion of the tube. The tube is then placed in a hydroforming tool that expands the tubular preform to form a part.

  12. A decision-analytic approach to predict state regulation of hydraulic fracturing

    E-Print Network [OSTI]

    Linkov, Igor

    Background: The development of horizontal drilling and hydraulic fracturing methods has dramatically increased the potential for the extraction of previously unrecoverable natural gas. Nonetheless, the potential risks and ...

  13. Institute for Materials Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute for Material Science Who we are and what we do 2:23 Institute for Materials Science: Alexander V. Balatsky IMS is an interdisciplinary research and educational center...

  14. Institute for ADVANCED STUDY

    E-Print Network [OSTI]

    · PROGRAM IN THEORETICAL BIOLOGY 103 · REPORT OF THE INSTITUTE LIBRARIES 107 INSTITUTE FOR ADVANCED STUDY Study has sustained its founding principle for seventy years. This com- mitment his yielded

  15. INL Experimental Program Roadmap for Thermal Hydraulic Code Validation

    SciTech Connect (OSTI)

    Glenn McCreery; Hugh McIlroy

    2007-09-01T23:59:59.000Z

    Advanced computer modeling and simulation tools and protocols will be heavily relied on for a wide variety of system studies, engineering design activities, and other aspects of the Next Generation Nuclear Power (NGNP) Very High Temperature Reactor (VHTR), the DOE Global Nuclear Energy Partnership (GNEP), and light-water reactors. The goal is for all modeling and simulation tools to be demonstrated accurate and reliable through a formal Verification and Validation (V&V) process, especially where such tools are to be used to establish safety margins and support regulatory compliance, or to design a system in a manner that reduces the role of expensive mockups and prototypes. Recent literature identifies specific experimental principles that must be followed in order to insure that experimental data meet the standards required for a “benchmark” database. Even for well conducted experiments, missing experimental details, such as geometrical definition, data reduction procedures, and manufacturing tolerances have led to poor Benchmark calculations. The INL has a long and deep history of research in thermal hydraulics, especially in the 1960s through 1980s when many programs such as LOFT and Semiscle were devoted to light-water reactor safety research, the EBRII fast reactor was in operation, and a strong geothermal energy program was established. The past can serve as a partial guide for reinvigorating thermal hydraulic research at the laboratory. However, new research programs need to fully incorporate modern experimental methods such as measurement techniques using the latest instrumentation, computerized data reduction, and scaling methodology. The path forward for establishing experimental research for code model validation will require benchmark experiments conducted in suitable facilities located at the INL. This document describes thermal hydraulic facility requirements and candidate buildings and presents examples of suitable validation experiments related to VHTRs, sodium-cooled fast reactors, and light-water reactors. These experiments range from relatively low-cost benchtop experiments for investigating individual phenomena to large electrically-heated integral facilities for investigating reactor accidents and transients.

  16. Capsule injection system for a hydraulic capsule pipelining system

    DOE Patents [OSTI]

    Liu, Henry (Columbia, MO)

    1982-01-01T23:59:59.000Z

    An injection system for injecting capsules into a hydraulic capsule pipelining system, the pipelining system comprising a pipeline adapted for flow of a carrier liquid therethrough, and capsules adapted to be transported through the pipeline by the carrier liquid flowing through the pipeline. The injection system comprises a reservoir of carrier liquid, the pipeline extending within the reservoir and extending downstream out of the reservoir, and a magazine in the reservoir for holding capsules in a series, one above another, for injection into the pipeline in the reservoir. The magazine has a lower end in communication with the pipeline in the reservoir for delivery of capsules from the magazine into the pipeline.

  17. On modeling hydraulic fracture in proper variables: stiffness, accuracy, sensitivity

    E-Print Network [OSTI]

    Mishuris, Gennady; Linkov, Alexander

    2012-01-01T23:59:59.000Z

    The problem of hydraulic fracture propagation is considered by using its recently suggested modified formulation in terms of the particle velocity, the opening in the proper degree, appropriate spatial coordinates and $\\varepsilon$-regularization. We show that the formulation may serve for significant increasing the efficiency of numerical tracing the fracture propagation. Its advantages are illustrated by re-visiting the Nordgren problem. It is shown that the modified formulation facilitates (i) possibility to have various stiffness of differential equations resulting after spatial discretization, (ii) obtaining highly accurate and stable numerical results with moderate computational effort, and (iii) sensitivity analysis. The exposition is extensively illustrated by numerical examples.

  18. Linear hydraulic drive system for a Stirling engine

    DOE Patents [OSTI]

    Walsh, Michael M. (Schenectady, NY)

    1984-02-21T23:59:59.000Z

    A hydraulic drive system operating from the periodic pressure wave produced by a Stirling engine along a first axis thereof and effecting transfer of power from the Stirling engine to a load apparatus therefor and wherein the movable, or working member of the load apparatus is reciprocatingly driven along an axis substantially at right angles to the first axis to achieve an arrangement of a Stirling engine and load apparatus assembly which is much shorter and the components of the load apparatus more readily accessible.

  19. The National Cancer Institute,

    E-Print Network [OSTI]

    The National Cancer Institute, International Cancer Information Center Bldg. 82, Rm 123 Bethesda, MD 20892 The National Cancer Institute (NCI) is part of the Federal Government. NCI coordinates the government's cancer research program. It is the largest of the 17 biomedical research institutes and centers

  20. OIL & GAS INSTITUTE Introduction

    E-Print Network [OSTI]

    Mottram, Nigel

    OIL & GAS INSTITUTE CONTENTS Introduction Asset Integrity Underpinning Capabilities 2 4 4 6 8 9 10 COMPETITIVENESS UNIVERSITY of STRATHCLYDE OIL & GAS INSTITUTE OIL & GAS EXPERTISE AND PARTNERSHIPS #12;1 The launch of the Strathclyde Oil & Gas Institute represents an important step forward for the University

  1. institution-logo Introduction

    E-Print Network [OSTI]

    Langerhans, Brian

    institution-logo Introduction Model Selection Experimental Design Bacteremia Summary Experimental in Validating Models of Infectious Diseases #12;institution-logo Introduction Model Selection Experimental Summary D. M. Bortz Experimental Design in Validating Models of Infectious Diseases #12;institution-logo

  2. INVESTIGATION OF HYDRAULIC PROBLEMS IN PUMPING STATION; CASE STUDY

    E-Print Network [OSTI]

    M. A. Younes

    Pumping stations play an important role in agriculture development projects. Performance of the pumping stations should satisfy water requirements, and management. There are many problems face these pumping stations affecting their reliability and stability. Hydraulic problems are the most important item in the field of pumping station operation and design. Motivation of this research was presence of wear and pitting impellers and casing of double suction volute casing centrifugal pumps for Ahmed Orabee Pumping Station. Vibration level, hydraulic performance test and visual inspection of impeller wear and pitting show that cavitation problem is the cause of damage. Cavitation normally occurs when liquid at a constant temperature is subjected to vapor pressure either by static or dynamic means. If the local pressure somewhere in the fluid drops to or below vapor pressure and nuclei are present, vapor cavities can be formed. As long as the local pressure stays at vapor pressure and cavity has reached a critical diameter, it will continue to grow rapidly. If the surrounding pressure is above vapor pressure, the bubbles become unstable and collapse. The

  3. Borehole deviation surveys are necessary for hydraulic fracture monitoring Leo Eisner, Schlumberger Cambridge Research, Petr Bulant, Charles University in Prague, Jol H. Le Calvez*,

    E-Print Network [OSTI]

    Cerveny, Vlastislav

    Borehole deviation surveys are necessary for hydraulic fracture monitoring Leo Eisner, Schlumberger Not performing accurate borehole deviation surveys for hydraulic fracture monitoring (HFM) and neglecting fracture parameters. Introduction Recently a large number of hydraulic fracture treatments have been

  4. Indian Institute of Technology Bombay INDIAN INSTITUTE OF TECHNOLOGY BOMBAY

    E-Print Network [OSTI]

    Narayanan, H.

    Indian Institute of Technology Bombay INDIAN INSTITUTE OF TECHNOLOGY BOMBAY INVITATION Description of work Estimated cost (1) (2) (3) 1 Construction of Institutional/Residential buildings, external development, HVAC, Elevators etc. for Indian Institute of Technology Bombay, at the campus

  5. Title: Hydraulic modeling of a mixed water level control hydro-mechanical gate

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Title: Hydraulic modeling of a mixed water level control hydro-mechanical gate Ludovic Cassan1 Abstract: The article describes the hydraulic functioning of a mixed water level control hydro- mechanical of the model to reproduce the functioning of this complex hydro-mechanical system. CE database Subject headings

  6. Asymptotic Analysis of Cross-Hole Hydraulic Tests in Fractured Granite

    E-Print Network [OSTI]

    Daniels, Jeffrey J.

    Asymptotic Analysis of Cross-Hole Hydraulic Tests in Fractured Granite by Walter A. Illman1 hydraulic conductivity and specific storage. Introduction Well test analyses in porous and fractured for the interpretation of three-dimensional pneumatic well tests conducted in porous or fractured geologic media, which

  7. Hydraulics of horizontal wells in fractured shallow aquifer systems Eungyu Parka,*, Hongbin Zhanb

    E-Print Network [OSTI]

    Zhan, Hongbin

    Hydraulics of horizontal wells in fractured shallow aquifer systems Eungyu Parka,*, Hongbin Zhanb Accepted 1 May 2003 Abstract An analysis of groundwater hydraulic head in the vicinity of a horizontal well in fractured or porous aquifers considering confined, leaky confined, and water-table aquifer boundary

  8. How to Effectively Compute the Reliability of a Thermal-Hydraulic Nuclear Passive System

    E-Print Network [OSTI]

    Boyer, Edmond

    1 How to Effectively Compute the Reliability of a Thermal- Hydraulic Nuclear Passive System E. Zio1 of a thermal-hydraulic (T-H) passive system of a nuclear power plant can be obtained by i) Monte Carlo (MC be prohibitive because of the large number of (typically long) T-H code simulations that must be performed (one

  9. ON THE DEVELOPMENT OF A REAL-TIME SIMULATOR ENGINE FOR A HYDRAULIC FORESTRY MACHINE

    E-Print Network [OSTI]

    Papadopoulos, Evangelos

    1 ON THE DEVELOPMENT OF A REAL-TIME SIMULATOR ENGINE FOR A HYDRAULIC FORESTRY MACHINE Evangelos@central.ntua.gr Abstract This work focuses on the development of a real-time training simulator engine for a forestry simulator, hydraulic dynamics, numerical stiffness, real-time, control system 1 Introduction Forestry

  10. Hydraulic controls of summer Arctic pack ice albedo H. Eicken,1

    E-Print Network [OSTI]

    Eicken, Hajo

    Hydraulic controls of summer Arctic pack ice albedo H. Eicken,1 T. C. Grenfell,2 D. K. Perovich,3 J. Perovich, J. A. Richter-Menge, and K. Frey (2004), Hydraulic controls of summer Arctic pack ice albedo, J that feedback processes involving the input of solar energy and subsequent changes in Arctic pack-ice albedo

  11. A Tour of the Aerodynamic and Hydraulic Research Infrastructure, Department of Engineering, University of Leicester

    E-Print Network [OSTI]

    Gorban, Alexander N.

    A Tour of the Aerodynamic and Hydraulic Research Infrastructure, Department of Engineering of the experimental facilities that are more relevant to fundamental and applied flow turbine research. The tour-section wind tunnel. This will be followed by a visit to the Hydraulics laboratory, Engineering Tower (13

  12. Development of Property-Transfer Models for Estimating the Hydraulic Properties of Deep

    E-Print Network [OSTI]

    Development of Property-Transfer Models for Estimating the Hydraulic Properties of Deep Sediments. #12;Development of Property-Transfer Models for Estimating the Hydraulic Properties of Deep Sediments-USGS World Wide Web: http://www.usgs.gov/ Any use of trade, product, or firm names in this publication

  13. Improving water desalination by hydraulically coupling an osmotic microbial fuel cell with a microbial desalination cell

    E-Print Network [OSTI]

    Improving water desalination by hydraulically coupling an osmotic microbial fuel cell Keywords: Forward osmosis Ion exchange membrane Microbial fuel cell Microbial desalination cell Wastewater fuel cell (OsMFC) containing a forward-osmosis (FO) membrane was hydraulically coupled with a microbial

  14. The Influence of Topology on Hydraulic Conductivity in a Sand-and-Gravel Aquifer

    E-Print Network [OSTI]

    The Influence of Topology on Hydraulic Conductivity in a Sand-and-Gravel Aquifer by Roger H. Morin1 and tracer testing was conducted in a single well that penetrated a sand-and-gravel aquifer at the U, and tortuosity that primarily control the hydraulic conductivity. Results show that F correlates well with K

  15. Experiments on a High Performance Hydraulic Manipulator Joint: Modelling for Control

    E-Print Network [OSTI]

    Papadopoulos, Evangelos

    Experiments on a High Performance Hydraulic Manipulator Joint: Modelling for Control Glen Bilodeau]. A position-based impedance control law was applied to a hydraulic manipulator, [10]. Although the focus for further understanding the system and for developing a robust force controller. System parameters

  16. SOFT SWITCHING APPROACH TO REDUCING TRANSITION LOSSES IN AN ON/OFF HYDRAULIC VALVE

    E-Print Network [OSTI]

    Li, Perry Y.

    SOFT SWITCHING APPROACH TO REDUCING TRANSITION LOSSES IN AN ON/OFF HYDRAULIC VALVE Michael B system is proposed. There has been a growing interest in the use of on/off valves to control hydraulic systems as a means of improving system efficiency. While on/off valves are efficient when they are fully

  17. Effects of tree height on branch hydraulics, leaf structure and gas exchange in California redwoods

    E-Print Network [OSTI]

    Sillett, Stephen Charles

    with height in both species. Despite hydraulic adjustments, leaf mass per unit area (LMA) and leaf carbon sempervirens; Sequoiadendron gigan- teum; carbon isotopes; hydraulic conductivity; photosyn- thesis; stomatal becomes too great (Zimmermann 1983; Tyree & Sperry 1989). Air seeding occurs when an air bubble is pulled

  18. Oil and Gas CDT Quantification of hydraulic fracturing induced seismic risks

    E-Print Network [OSTI]

    Henderson, Gideon

    quantification Overview Hydraulic fracturing or "fracking" is a technique that uses fluids, pumped at high. Seismic risks due to hydraulic fracturing have been identified following the fracking activities predictions of the coupled multi-physics phenomenon of fracking might arise from two primary sources

  19. Engine having a high pressure hydraulic system and low pressure lubricating system

    DOE Patents [OSTI]

    Bartley, Bradley E. (Manito, IL); Blass, James R. (Bloomington, IL); Gibson, Dennis H. (Chillicothe, IL)

    2000-01-01T23:59:59.000Z

    An engine includes a high pressure hydraulic system having a high pressure pump and at least one hydraulically-actuated device attached to an engine housing. A low pressure engine lubricating system is attached to the engine housing and includes a circulation conduit fluidly connected to an outlet from the high pressure pump.

  20. Information content of slug tests for estimating hydraulic properties in realistic, high-conductivity aquifer scenarios

    E-Print Network [OSTI]

    Barrash, Warren

    Information content of slug tests for estimating hydraulic properties in realistic, high for partially-penetrating slug tests in unconfined aquifers (Malama et al., in press) provides a semi the ultimate goal of determining aquifer properties such as hydraulic conductivity K and specific storage Ss