National Library of Energy BETA

Sample records for boring cxs applied

  1. BORE II

    SciTech Connect (OSTI)

    2015-08-01

    Bore II, co-developed by Berkeley Lab researchers Frank Hale, Chin-Fu Tsang, and Christine Doughty, provides vital information for solving water quality and supply problems and for improving remediation of contaminated sites. Termed "hydrophysical logging," this technology is based on the concept of measuring repeated depth profiles of fluid electric conductivity in a borehole that is pumping. As fluid enters the wellbore, its distinct electric conductivity causes peaks in the conductivity log that grow and migrate upward with time. Analysis of the evolution of the peaks enables characterization of groundwater flow distribution more quickly, more cost effectively, and with higher resolution than ever before. Combining the unique interpretation software Bore II with advanced downhole instrumentation (the hydrophysical logging tool), the method quantifies inflow and outflow locations, their associated flow rates, and the basic water quality parameters of the associated formation waters (e.g., pH, oxidation-reduction potential, temperature). In addition, when applied in conjunction with downhole fluid sampling, Bore II makes possible a complete assessment of contaminant concentration within groundwater.

  2. BORE II

    Energy Science and Technology Software Center (OSTI)

    2015-08-01

    Bore II, co-developed by Berkeley Lab researchers Frank Hale, Chin-Fu Tsang, and Christine Doughty, provides vital information for solving water quality and supply problems and for improving remediation of contaminated sites. Termed "hydrophysical logging," this technology is based on the concept of measuring repeated depth profiles of fluid electric conductivity in a borehole that is pumping. As fluid enters the wellbore, its distinct electric conductivity causes peaks in the conductivity log that grow and migratemore » upward with time. Analysis of the evolution of the peaks enables characterization of groundwater flow distribution more quickly, more cost effectively, and with higher resolution than ever before. Combining the unique interpretation software Bore II with advanced downhole instrumentation (the hydrophysical logging tool), the method quantifies inflow and outflow locations, their associated flow rates, and the basic water quality parameters of the associated formation waters (e.g., pH, oxidation-reduction potential, temperature). In addition, when applied in conjunction with downhole fluid sampling, Bore II makes possible a complete assessment of contaminant concentration within groundwater.« less

  3. Double diameter boring tool

    DOE Patents [OSTI]

    Ashbaugh, Fred N.; Murry, Kenneth R.

    1988-12-27

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting edges formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first cutting edge tip to the axis of rotation plus the distance from the second cutting edge tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second cutting edge tip to the axis of rotation minus one-half the distance from the first cutting edge tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  4. Double diameter boring tool

    DOE Patents [OSTI]

    Ashbaugh, F.A.; Murry, K.R.

    1986-02-10

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting flutes formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first flute tip to the axis of rotation plus the distance from the second flute tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second flute tip to the axis of rotation minus one-half the distance from the first flute tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  5. Earth boring machine and method

    SciTech Connect (OSTI)

    Sullinger, R.

    1983-09-13

    An earth boring machine and method are disclosed. An above-ground reference line, such as a laser beam, is established for a hole to be bored. The direction of the reference line is detected. The direction of a cutting head of the boring machine in a bore hole is detected and signals of the detected direction are transmitted to a control unit for comparison with the reference line direction. The boring machine is controlled with, for example, cam actuated adjustable peripheral cutters on the cutting head so that the direction of the boring machine can be adjusted to that of the reference line.

  6. Maneuvering impact boring head

    DOE Patents [OSTI]

    Zollinger, W.T.; Reutzel, E.W.

    1998-08-18

    An impact boring head may comprise a main body having an internal cavity with a front end and a rear end. A striker having a head end and a tail end is slidably mounted in the internal cavity of the main body so that the striker can be reciprocated between a forward position and an aft position in response to hydraulic pressure. A compressible gas contained in the internal cavity between the head end of the striker and the front end of the internal cavity returns the striker to the aft position upon removal of the hydraulic pressure. 8 figs.

  7. Maneuvering impact boring head

    DOE Patents [OSTI]

    Zollinger, W. Thor; Reutzel, Edward W.

    1998-01-01

    An impact boring head may comprise a main body having an internal cavity with a front end and a rear end. A striker having a head end and a tail end is slidably mounted in the internal cavity of the main body so that the striker can be reciprocated between a forward position and an aft position in response to hydraulic pressure. A compressible gas contained in the internal cavity between the head end of the striker and the front end of the internal cavity returns the striker to the aft position upon removal of the hydraulic pressure.

  8. Cam-controlled boring bar

    DOE Patents [OSTI]

    Glatthorn, Raymond H.

    1986-01-01

    A cam-controlled boring bar system (100) includes a first housing (152) which is rotatable about its longitudinal axis (154), and a second housing in the form of a cam-controlled slide (158) which is also rotatable about the axis (154) as well as being translatable therealong. A tool-holder (180) is mounted within the slide (158) for holding a single point cutting tool. Slide (158) has a rectangular configuration and is disposed within a rectangularly configured portion of the first housing (152). Arcuate cam slots (192) are defined within a side plate (172) of the housing (152), while cam followers (194) are mounted upon the cam slide (158) for cooperative engagement with the cam slots (192). In this manner, as the housing (152) and slide (158) rotate, and as the slide (158) also translates, a through-bore (14) having an hourglass configuration will be formed within a workpiece (16) which may be, for example, a nuclear reactor steam generator tube support plate.

  9. Large-bore pipe decontamination

    SciTech Connect (OSTI)

    Ebadian, M.A.

    1998-01-01

    The decontamination and decommissioning (D and D) of 1200 buildings within the US Department of Energy-Office of Environmental Management (DOE-EM) Complex will require the disposition of miles of pipe. The disposition of large-bore pipe, in particular, presents difficulties in the area of decontamination and characterization. The pipe is potentially contaminated internally as well as externally. This situation requires a system capable of decontaminating and characterizing both the inside and outside of the pipe. Current decontamination and characterization systems are not designed for application to this geometry, making the direct disposal of piping systems necessary in many cases. The pipe often creates voids in the disposal cell, which requires the pipe to be cut in half or filled with a grout material. These methods are labor intensive and costly to perform on large volumes of pipe. Direct disposal does not take advantage of recycling, which could provide monetary dividends. To facilitate the decontamination and characterization of large-bore piping and thereby reduce the volume of piping required for disposal, a detailed analysis will be conducted to document the pipe remediation problem set; determine potential technologies to solve this remediation problem set; design and laboratory test potential decontamination and characterization technologies; fabricate a prototype system; provide a cost-benefit analysis of the proposed system; and transfer the technology to industry. This report summarizes the activities performed during fiscal year 1997 and describes the planned activities for fiscal year 1998. Accomplishments for FY97 include the development of the applicable and relevant and appropriate regulations, the screening of decontamination and characterization technologies, and the selection and initial design of the decontamination system.

  10. Small diameter, deep bore optical inspection system

    DOE Patents [OSTI]

    Lord, David E.; Petrini, Richard R.; Carter, Gary W.

    1981-01-01

    An improved rod optic system for inspecting small diameter, deep bores. The system consists of a rod optic system utilizing a curved mirror at the end of the rod lens such that the optical path through the system is bent 90.degree. to minimize optical distortion in examining the sides of a curved bore. The system is particularly useful in the examination of small bores for corrosion, and is capable of examining 1/16 inch diameter and up to 4 inch deep drill holes, for example. The positioning of the curved mirror allows simultaneous viewing from shallow and right angle points of observation of the same artifact (such as corrosion) in the bore hole. The improved rod optic system may be used for direct eye sighting, or in combination with a still camera or a low-light television monitor; particularly low-light color television.

  11. Small diameter, deep bore optical inspection system

    DOE Patents [OSTI]

    Lord, D.E.; Petrini, R.R.; Carter, G.W.

    An improved rod optic system for inspecting small diameter, deep bores is described. The system consists of a rod optic system utilizing a curved mirror at the end of the rod lens such that the optical path through the system is bent 90/sup 0/ to minimize optical distortion in examing the sides of a curved bore. The system is particularly useful in the examination of small bores for corrosion, and is capable if examing 1/16 inch diameter and up to 4-inch deep drill holes, for example. The positioning of the curved mirror allows simultaneous viewing from shallow and righ angle points of observation of the same artifact (such as corrosion) in the bore hole. The improved rod optic system may be used for direct eye sighting, or in combination with a still camera or a low-light television monitor; particularly low-light color television.

  12. Apply

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied Studies and Technology (AS&T) Applied Studies and Technology (AS&T) Applied Studies and Technology (AS&T) DOE established the Environmental Sciences Laboratory (ESL) in Grand Junction, Colorado, in 1991 to support its programs. ESL scientists perform applied research and laboratory-scale demonstrations of soil and groundwater remediation and treatment technologies. Capabilities Installation, monitoring, and operation of permeable reactive barriers Research of permeable

  13. Apply

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply Application Process Bringing together top space science students with internationally recognized researchers at Los Alamos in an educational and collaborative atmosphere. ...

  14. Boring in the Big City - part 2

    SciTech Connect (OSTI)

    Giuliani, A.J.

    1996-08-01

    This paper describes technologies being utilized or tested by Brooklyn Union for gas main installation. Trenchless technologies described include pipe splitting, key holes to minimize excavations, and boring. Areas in lining system technology which require further development by vendors and manufacturers of trenchless equipment are also addressed. Specific needs identified include: (1) improving instrumentation for locating and controlling underground boring; (2) repairing soft and hard lining systems; and (3) developing a window cutter to safely remove the old carrier pipes without damaging the newly fitted internal plastic pipes.

  15. Large Bore Powder Gun Qualification (U)

    SciTech Connect (OSTI)

    Rabern, Donald A.; Valdiviez, Robert

    2012-04-02

    A Large Bore Powder Gun (LBPG) is being designed to enable experimentalists to characterize material behavior outside the capabilities of the NNSS JASPER and LANL TA-55 PF-4 guns. The combination of these three guns will create a capability to conduct impact experiments over a wide range of pressures and shock profiles. The Large Bore Powder Gun will be fielded at the Nevada National Security Site (NNSS) U1a Complex. The Complex is nearly 1000 ft below ground with dedicated drifts for testing, instrumentation, and post-shot entombment. To ensure the reliability, safety, and performance of the LBPG, a qualification plan has been established and documented here. Requirements for the LBPG have been established and documented in WE-14-TR-0065 U A, Large Bore Powder Gun Customer Requirements. The document includes the requirements for the physics experiments, the gun and confinement systems, and operations at NNSS. A detailed description of the requirements is established in that document and is referred to and quoted throughout this document. Two Gun and Confinement Systems will be fielded. The Prototype Gun will be used primarily to characterize the gun and confinement performance and be the primary platform for qualification actions. This gun will also be used to investigate and qualify target and diagnostic modifications through the life of the program (U1a.104 Drift). An identical gun, the Physics Gun, will be fielded for confirmatory and Pu experiments (U1a.102D Drift). Both guns will be qualified for operation. The Gun and Confinement System design will be qualified through analysis, inspection, and testing using the Prototype Gun for the majority of process. The Physics Gun will be qualified through inspection and a limited number of qualification tests to ensure performance and behavior equivalent to the Prototype gun. Figure 1.1 shows the partial configuration of U1a and the locations of the Prototype and Physics Gun/Confinement Systems.

  16. Bore II - Advanced Wellbore Technology Characterizes Groundwater Flow and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contamination - Energy Innovation Portal Geothermal Geothermal Energy Analysis Energy Analysis Find More Like This Return to Search Bore II - Advanced Wellbore Technology Characterizes Groundwater Flow and Contamination Lawrence Berkeley National Laboratory Contact LBL About This Technology Technology Marketing SummaryBore II, co-developed by Berkeley Lab researchers Frank Hale, Chin-Fu Tsang, and Christine Doughty, provides vital information for solving water quality and supply problems and

  17. Grinding tool for making hemispherical bores in hard materials

    DOE Patents [OSTI]

    Duran, E.L.

    1985-04-03

    A grinding tool for forming hemispherical bores in hard materials such as boron carbide. The tool comprises a hemicircular grinding bit, formed of a metal bond diamond matrix, which is mounted transversely on one end of a tubular tool shaft. The bit includes a spherically curved outer edge surface which is the active grinding surface of the tool. Two coolant fluid ports on opposite sides of the bit enable introduction of coolant fluid through the bore of the tool shaft so as to be emitted adjacent the opposite sides of the grinding bit, thereby providing optimum cooling of both the workpiece and the bit.

  18. A small-bore high-field superconducting quadrupole magnet

    SciTech Connect (OSTI)

    Barlow, D.B.; Kraus, R.H.; Lobb, C.T.; Menzel, M.T. ); Walstrom, P.L. )

    1990-01-01

    A prototype superconducting quadrupole magnet was designed and built for use in superconducting coupled-cavity linacs where the use of permanent magnets is ruled out by consideration of trapped flux losses. The magnet has a clear bore diameter of 1.8 cm and outside diameter of 11 cm and length of 11 cm. The magnet was operated at a temperature of 4.2 K and obtained a peak quadrupole field gradient of 320 T/m.

  19. Use of potassium hydroxide solutions in a well bore

    SciTech Connect (OSTI)

    Cordiner, F.S.; Sydansk, R.D.

    1981-08-18

    A workover fluid, a kill fluid, or completion fluid having potassium hydroxide dissolved therein is injected into a well bore penetrating and communicating with a subterranean sandstone formation containing water-sensitive fine particles, including clays, and invades the sandstone formation. Potassium hydroxide contacts and stabilizes the fine particles for a substantial period of time thereby substantially preventing formation permeability damage caused by encroachment of aqueous solutions having a distinct and undesired ionic constituency.

  20. Grouting guidelines for Hanford Tanks Initiative cone penetrometer borings

    SciTech Connect (OSTI)

    Iwatate, D.F.

    1998-05-18

    Grouting of an open cone penetrometer (CP) borehole is done to construct a barrier that prevents the vertical migration of fluids and contaminants between geologic units and aquifers intersected by the boring. Whether to grout, the types of grout, and the method of deployment are functions of the site-specific conditions. This report recommends the strategy that should be followed both before and during HTI [Hanford Tanks Initiative] CP deployment to decide specific borehole grouting needs at Hanford SST farms. Topics discussed in this report that bear on this strategy include: Regulatory guidance, hydrogeologic conditions, operational factors, specific CP grouting deployment recommendations.

  1. Small bore ceramic laser tube inspection light table

    DOE Patents [OSTI]

    Updike, Earl O.

    1990-01-01

    Apparatus for inspecting small bore ceramic laser tubes, which includes a support base with one or more support rollers. A fluorescent light tube is inserted within the laser tube and the laser tube is supported by the support rollers so that a gap is maintained between the laser tube and the fluorescent tube to enable rotation of the laser tube. In operation, the ceramic tube is illuminated from the inside by the fluorescent tube to facilitate visual inspection. Centering the tube around the axial light of the fluorescent tube provides information about straightness and wall thickness of the laser tube itself.

  2. Bore tube assembly for steam cooling a turbine rotor

    DOE Patents [OSTI]

    DeStefano, Thomas Daniel; Wilson, Ian David

    2002-01-01

    An axial bore tube assembly for a turbine is provided to supply cooling steam to hot gas components of the turbine wheels and return the spent cooling steam. A pair of inner and outer tubes define a steam supply passage concentric about an inner return passage. The forward ends of the tubes communicate with an end cap assembly having sets of peripheral holes communicating with first and second sets of radial tubes whereby cooling steam from the concentric passage is supplied through the end cap holes to radial tubes for cooling the buckets and return steam from the buckets is provided through the second set of radial tubes through a second set of openings of the end cap into the coaxial return passage. A radial-to-axial flow transitioning device, including anti-swirling vanes is provided in the end cap. A strut ring adjacent the aft end of the bore tube assembly permits axial and radial thermal expansion of the inner tube relative to the outer tube.

  3. 10 Questions with Well-Bore Cement Researcher Dr. Barbara Kutchko |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy with Well-Bore Cement Researcher Dr. Barbara Kutchko 10 Questions with Well-Bore Cement Researcher Dr. Barbara Kutchko March 31, 2015 - 2:53pm Addthis Barbara Kutchko, a well-bore cement researcher, studies the make-up and properties of cement used in oil and gas drilling. | Photo courtesy of the National Energy Technology Lab (NETL). Barbara Kutchko, a well-bore cement researcher, studies the make-up and properties of cement used in oil and gas drilling. | Photo

  4. Load-deflection characteristics of small bore insulated pipe clamps

    SciTech Connect (OSTI)

    Severud, L.K.; Clark, G.L.

    1982-01-01

    High temperature LMFBR piping is subject to rapid temperature changes during transient events. Typically, this pipe is supported by specially designed insulated pipe clamps to prevent excessive thermal stress from developing during these transients. The special insulated clamps used on both FFTF and CRBR piping utilize a Belleville spring arrangement to compensate for pipe thermal expansion. Analysis indicates that this produces a non-linear, directionally sensitive clamp spring rate. Since these spring rates influence the seismic response of a supported piping system, it was deemed necessary to evaluate them further by test. This has been accomplished for the FFTF clamps. A more standard insulated pipe clamp, which does not incorporate Belleville springs to accommodate thermal expansion, was also tested. This type clamp is simple in design, and economically attractive. It may have wide application prospects for use in LMFBR small bore auxiliary piping operating at temperatures below 427/sup 0/C. Load deflection tests were conducted on 2.54 CM and 7.62 CM diameter samples of these commercial clamps.

  5. Mine roof expansion anchor with improved bore hole engagement means and method of installation thereof

    SciTech Connect (OSTI)

    Wright, R.L.

    1993-06-15

    An expansion anchor assembly is described for insertion in a bore hole of predetermined diameter in a rock formation to anchor firmly within said bore hole the threaded, upper end of a bolt having a lower end positioned outside said bore hole, said assembly comprising, in combination: (a) an expansion shell having a plurality of leaves generally symmetrical about a central axis and radially expansible into gripping engagement with the wall of said bore hole; (b) a tapered plug having a larger diameter upper end and a smaller diameter lower end and a through, axial bore for threaded engagement with said bolt upper end for axial movement of said plug in response to rotation of odd bolt from a first to a second position to effect radially outward movement of odd leaves, said lower end of said plug being axially spaced from said bolt upper end by first and second distances when said plug is in its first and second positions, respectively; (c) an element axially supporting said shell with respect to said plug and bolt in a position wherein said central axis is substantially with said bolt; (d) means rotationally securing said element to said shell; and (e) resilient bore wall engagement means including a portion of said element extending away from said central axis at a position spaced axially from said upper end of said bolt by a distance at least as great as said second distance, said portion extending radially outwardly from said central axis by a third distance greater than one-half of said predetermined diameter, whereby said portion engages and is deflected inwardly by said bore hole wall and inhibits rotation of said assembly upon insertion of said bolt and anchor into said bore hole and rotation of said bolt.

  6. Solid-to-hybrid transitioning armature railgun with non-conforming-to-prejudice bore profile

    DOE Patents [OSTI]

    Solberg, Jerome Michael

    2012-12-04

    An improved railgun, railgun barrel, railgun projectile, and railgun system for accelerating a solid-to-hybrid transitioning armature projectile using a barrel having a bore that does not conform to a cross-sectional profile of the projectile, to contact and guide the projectile only by the rails in a low pressure bore volume so as to minimize damage, failure, and/or underperformance caused by plasma armatures, insulator ablation, and/or restrikes.

  7. CX-008589: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Clearwater Campus District Cooling - Activity 3 Geothermal Test Bores CX(s) Applied: A9, B3.1 Date: 07/23/2012 Location(s): Florida Offices(s): Golden Field Office

  8. CX-007806: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Glen Canyon Communication Site Geologic Boring CX(s) Applied: B3.1 Date: 11/04/2011 Location(s): Arizona Offices(s): Western Area Power Administration-Desert Southwest Region

  9. CX-012593: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Western Sector Characterization Soil Borings and Groundwater Monitoring Well Installation, Phase III CX(s) Applied: B3.1Date: 41829 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  10. Methods and apparatus of suppressing tube waves within a bore hole and seismic surveying systems incorporating same

    DOE Patents [OSTI]

    West, Phillip B.; Haefner, Daryl

    2004-08-17

    Methods and apparatus for attenuating waves in a bore hole, and seismic surveying systems incorporating the same. In one embodiment, an attenuating device includes a soft compliant bladder coupled to a pressurized gas source. A pressure regulating system reduces the pressure of the gas from the gas source prior to entering the bladder and operates in conjunction with the hydrostatic pressure of the fluid in a bore hole to maintain the pressure of the bladder at a specified pressure relative to the surrounding bore hole pressure. Once the hydrostatic pressure of the bore hole fluid exceeds that of the gas source, bore hole fluid may be admitted into a vessel of the gas source to further compress and displace the gas contained therein. In another embodiment, a water-reactive material may be used to provide gas to the bladder wherein the amount of gas generated by the water-reactive material may depend on the hydrostatic pressure of the bore hole fluid.

  11. Methods and apparatus of suppressing tube waves within a bore hole and seismic surveying systems incorporating same

    DOE Patents [OSTI]

    West, Phillip B.; Haefner, Daryl

    2005-12-13

    Methods and apparatus for attenuating waves in a bore hole, and seismic surveying systems incorporating the same. In one embodiment, an attenuating device includes a soft compliant bladder coupled to a pressurized gas source. A pressure regulating system reduces the pressure of the gas from the gas source prior to entering the bladder and operates in conjunction with the hydrostatic pressure of the fluid in a bore hole to maintain the pressure of the bladder at a specified pressure relative to the surrounding bore hole pressure. Once the hydrostatic pressure of the bore hole fluid exceeds that of the gas source, bore hole fluid may be admitted into a vessel of the gas source to further compress and displace the gas contained therein. In another embodiment, a water-reactive material may be used to provide gas to the bladder wherein the amount of gas generated by the water-reactive material may depend on the hydrostatic pressure of the bore hole fluid.

  12. Three years' experience with the offshore self-boring pressuremeter ''PAM''

    SciTech Connect (OSTI)

    Brucy, F.; Fay, J.B.; LeTirant, P.

    1984-05-01

    The Offshore Self-Boring Pressuremeter (PAM) has been developed by the Institut Francais du Petrole for geotechnical investigations in water depths up to 1000 meters. The PAM was first presented at the 1981 OTC. It mainly consists of a seabed frame from which a self-boring pressuremeter probe is operated. To date, the PAM has totaled nearly 450 meters of borehole depth and more than 200 pressuremeter tests. Investigations have been performed in a wide variety of soil types. The latest deepwater campaign was carried out successfully in the Mediterranean at a water depth of 625 meters. Extensive geotechnical information is obtained from a PAM boring operation. The use of the pressuremeter method for offshore investigations and foundation designing should open up very interesting prospects.

  13. Rotor bore and turbine rotor wheel/spacer heat exchange flow circuit

    DOE Patents [OSTI]

    Caruso, Philip M.; Eldrid, Sacheverel Quentin; Ladhani, Azad A.; DeMania, Alan Richard; Palmer, Gene David; Wilson, Ian David; Rathbun, Lisa Shirley; Akin, Robert Craig

    2002-01-01

    In a turbine having closed-circuit steam-cooling passages about the rim of the rotor during steady-state operation, compressor discharge air is supplied to the rotor bore for passage radially outwardly into the wheel space cavities between the wheels and spacers. Communicating slots and channels in the spacers and wheels at circumferentially spaced positions enable egress of the compressor discharge air into the hot gas flow path. At turbine startup, cooling air flows through the closed-circuit steam passages to cool the outer rim of the rotor while compressor discharge air pre-warms the wheels and spacers. At steady-state, cooling steam is supplied in the closed-circuit steam-cooling passages and compressor discharge air is supplied through the bore and into the wheel space cavities to cool the rotor.

  14. Compressible pressure compensator within closed lubricant volume of an earth boring apparatus

    SciTech Connect (OSTI)

    Saxman, W. C.; Parker, L. J.

    1985-04-09

    A compressible pressure compensating member is disposed within a sealed lubricant volume enclosing a bearing and seal system of an earth boring apparatus. Lubricant is maintained within the volume by metal face seals so that both the bearing and the seal structure are lubricated thereby. As the lubricant expands, due to thermal expansion under use, the increased pressure is accommodated by compression of the compressible member so that no lubricant is expelled through the seals. When the lubricant cools and contracts, the compensator expands to maintain the lubricant volume at the initially filled level.

  15. Small bore, two-stroke diesels after three years of chemical tanker service

    SciTech Connect (OSTI)

    1995-11-01

    Small-bore, two-stroke cross-head engines have been manufactured by MAN B&W Alpha Diesel in Frederikshavn, Denmark, for almost eight years. The 6L35MC engine (bore 350 x stroke 1050 mm) has an output of 3600 kW at 210 r/min, and runs on heavy fuel oil of IF380. The engine is equipped with a power take-off for a 600 kW shaft alternator, which operates almost 70% of the time. Therefore, the engine is normally running at a constant speed of 210 r/min. According to the logbook, the engine has been in operation for 12 290 hours and the shaft alternator for 8480 hours. The chief engineer`s records show a fuel oil consumption of 13610 to 13680 liters per 24 hours, at a power setting of 80% to 85% MCR and 210 r/ min, which is approximately equivalent to 195 g/kWh. Cylinder oil consumption is 76 L/day (about 1.0 g/KWh). These figures confirm that practical measurements comply with the theoretical values. This paper reports in brief, the operating results for the engine.

  16. Report on the development of the large-bore powder gun for the Nevada Test Site

    SciTech Connect (OSTI)

    B.J. Jensen

    2009-03-01

    Experiments are needed to locate phase boundaries and to provide both Hugoniot data and off-Hugoniot data (such as principle isentrope, refreezing, dynamic strength, etc.) achieved through complex loading paths. The objective of the current work was to de- velop a large bore (3.5 inch or greater) powder gun capable of accelerating projectiles to moderately high velocities exceeding 2 km/s for impact experiments. A total of 24 ex- periments were performed to measure the projectile velocity, breech strain, and projectile tilt to demonstrate the performance of the gun up to the maximum breech capacity of 16 pounds of propellant. Physics experiments using a multislug method were performed to obtain sound speed and Hugoniot for shocked cerium metal and to demonstrate the ability of the large bore gun to conduct well-defined, plate-impact experiments. In addition, six experiments were performed on the prototype containment system to examine the ability of the launcher and containment system to withstand the impact event and contain the propellant gases and impact debris postshot. The data presented here were essential for qualification of the launcher for experiments to be conducted at the U1a complex of the Nevada Test Site.

  17. Developing of the large-bore powder gun for the Nevada test site

    SciTech Connect (OSTI)

    Jensen, Brian J; Esparza, James S

    2009-01-01

    Plate-impact experiments on single stage guns provide very planar loading conditions suitable for studying complex phenomena such as phase transitions and material strength, and provide important data useful for constraining and validating predictive models. The objective of the current work was to develop a large-bore (3.5-inches or greater) powder gun capable of accelerating projectiles to moderately high velocities (greater than 2.25 km/s) for impact experiments at Nevada Test Site. This gun will span a performance gap between existing gun facilities and provide a means of examining phenomena over a wide range of stresses and time-scales. Advantages of the large-bore gun include the capability to load multiple samples simultaneously, the use of large diameter samples that significantly extend the time duration of the experiment, and minimal tilt (no bow). This new capability required the development of a disposable confinement system that used an explosively driven closure method to prevent contamination from moving up into the gun system. Experimental results for both the gun system and the explosive valve are presented.

  18. DEVELOPMENT OF THE LARGE-BORE POWDER GUN FOR THE NEVADA TEST SITE

    SciTech Connect (OSTI)

    Jensen, B.J.; Esparza, J.

    2009-12-28

    Plate-impact experiments on single stage guns provide very planar loading conditions suitable for studying complex phenomena such as phase transitions and material strength, and provide important data useful for constraining and validating predictive models. The objective of the current work was to develop a large-bore (3.5'' or greater) powder gun capable of accelerating projectiles to moderately high velocities (greater than 2.25 km/s) for impact experiments at Nevada Test Site. This gun will span a performance gap between existing gun facilities and provide a means of examining phenomena over a wide range of stresses and time-scales. Advantages of the large-bore gun include the capability to load multiple samples simultaneously, the use of large diameter samples that significantly extend the time duration of the experiment, and minimal tilt (no bow). This new capability required the development of a disposable confinement system that used an explosively driven closure method to prevent contamination from moving up into the gun system. Experimental results for both the gun system and the explosive valve are presented.

  19. Load-deflection characteristics of small-bore insulated-pipe clamps

    SciTech Connect (OSTI)

    Severud, L.K.; Clark, G.L.

    1981-12-01

    The special insulated clamps used on both FFTF and CRBR piping utilize a Belleville spring arrangement to compensate for pipe thermal expansion. Analysis indicates that this produces a non-linear, directionally sensitive clamp spring rate. Since these spring rates influence the seismic response of a supported piping system, it was deemed necessary to evaluate them further by test. This has been accomplished for the FFTF clamps. A more standard insulated pipe clamp, which does not incorporate Belleville springs to accommodate thermal expansion, was also tested. This type clamp is simple in design, and economically attractive. It may have wide application prospects for use in LMFBR small bore auxiliary piping operating at temperatures below 427/sup 0/C. Load deflection tests were conducted on 2.54 CM and 7.62 CM diameter samples of these commercial clamps.

  20. DESIGN AND CONSTRUCTION OF A 15 T, 120 MM BORE IR QUADRUPOLE MAGNET FOR LARP

    SciTech Connect (OSTI)

    Caspi, S.; Cheng, D.; Dietderich, D.; Felice, H.; Ferracin, P.; Hafalia, R.; Hannaford, R.; Sabbi, G. S.; Anerella, M.; Ghosh, A.; Schmalzle, J.; Wanderer, P.; Ambrosio, G.; Bossert, R.; Kashikhin, V.; Pasholk, D.; Zlobin, A.

    2009-05-04

    Pushing accelerator magnets beyond 10 T holds a promise of future upgrades to machines like the Large Hadron Collider (LHC) at CERN. Nb{sub 3}Sn conductor is at the present time the only practical superconductor capable of generating fields beyond 10 T. In support of the LHC Phase-II upgrade, the US LHC Accelerator Research Program (LARP) is developing a large bore (120 mm) IR quadrupole (HQ) capable of reaching 15 T at its conductor peak field and a peak gradient of 219 T/m at 1.9 K. While exploring the magnet performance limits in terms of gradient, forces and stresses the 1 m long two-layer coil will demonstrate additional features such as alignment and accelerator field quality. In this paper we summarize the design and report on the magnet construction progress.

  1. Ultrasonic probe system for the bore-side inspection of tubes and welds therein

    DOE Patents [OSTI]

    Cook, K. Von; Koerner, Dan W.; Cunningham, Jr., Robert A.; Murrin, Jr., Horace T.

    1977-07-26

    A probe system is provided for the bore-side inspection of tube-to-header welds and the like for small diameter tubes. The probe head of the system includes an ultrasonic transmitter-receiver transducer, a separate ultrasonic receiver, a reflector associated with the transducer to properly orient the ultrasonic signal with respect to a tube wall, a baffle to isolate the receiver from the transducer, and means for maintaining the probe head against the tube wall under investigation. Since the probe head must rotate to inspect along a helical path, special ultrasonic signal connections are employed. Through the use of the probe, flaws at either the inner or outer surfaces may be detected.

  2. Characterization of Single-Cylinder Small-Bore 4-Stroke CIDI Engine Combustion

    SciTech Connect (OSTI)

    Henein, N A

    2005-11-30

    Direct injection diesel engines power most of the heavy-duty vehicles. Due to their superior fuel economy, high power density and low carbon dioxide emissions, turbocharged, small bore, high speed, direct injection diesel engines are being considered to power light duty vehicles. Such vehicles have to meet stringent emission standards. However, it is difficult to meet these standards by modifying the in-cylinder thermodynamic and combustion processes to reduce engine-out emissions. After-treatment devices will be needed to achieve even lower emission targets required in the production engines to account for the anticipated deterioration after long periods of operation in the field. To reduce the size, mass and cost of the after-treatment devices, there is a need to reduce engine-out emissions and optimize both the engine and the aftertreatment devices as one integrated system. For example, the trade-off between engine-out NOx and PM, suggests that one of these species can be minimized in the engine, with a penalty in the other, which can be addressed efficiently in the after-treatment devices. Controlling engine-out emissions can be achieved by optimizing many engine design and operating parameters. The design parameters include, but are not limited to, the type of injection system: (CRS) Common Rail System, (HEUI ) Hydraulically Actuated and Electronically controlled Unit Injector, or (EUI) Electronic Unit Injector; engine compression ratio, combustion chamber design (bowl design), reentrance geometry, squish area and intake and exhaust ports design. With four-valve engines, the swirl ratio depends on the design of both the tangential and helical ports and their relative locations. For any specific engine design, the operating variables need also to be optimized. These include injection pressure, injection rate, injection duration and timing (pilot, main, and post injection), EGR ratio, and swirl ratio. The goal of the program is to gain a better understanding of

  3. Subsurface exploration using bucket auger borings and down-hole geologic inspection

    SciTech Connect (OSTI)

    Scullin, C.M. )

    1994-03-01

    The down-hole geologic inspection of 24 in. bucket auger borings has been a hands-on technique for collecting valuable geologic structural and lithologic detail in southern California investigations for over 35 yr. Although it has been used for all types of investigations for hillside urban development, it is of particular benefit in landslide investigations and evaluations. The benefits of down-hole geologic inspection during detailed mapping of large landslide complexes with multiple slide planes are discussed in this paper. Many of the geotechnical investigations of these massive landslide complexes have been very limited in their determinations of accurate landslide parameters and very deficient in proper engineering analysis while based upon this limited data. This has resulted in many cases where the geotechnical consultant erroneously concludes that ancient landslides don't move and it is all right to build upon them, even though they have neither justified the landslide parameters, nor the slope stability or safety. Because this author and the many consultants contacted during the preparation of this paper were not aware of other publications regarding this method of collecting detailed geologic data, this author included the safety considerations, safety equipment, the cost and the Cal OSHA requirements for entering exploration shafts.

  4. Initial studies of Bremsstrahlung energy deposition in small-bore superconducting undulator structures in linac environments

    SciTech Connect (OSTI)

    Cremer, T.; Tatchyn, R.

    1995-12-31

    One of the more promising technologies for developing minimal-length insertion devices for linac-driven, single-pass Free Electron Lasers (FELs) operating in the x-ray range is based on the use of superconducting (SC) materials. In recent FEL simulations, for example, a bifilar helical SC device with a 2 cm period and 1.8 T field was found to require a 30 m saturation length for operation at 1.5{Angstrom} on a 15 GeV linac, more than 40% shorter than an alternative hybrid/permanent magnet (hybrid/PM) undulator. AT the same time, however, SC technology is known to present characteristic difficulties for insertion device design, both in engineering detail and in operation. Perhaps the most critical problem, as observed, e.g., by Madey and co-workers in their initial FEL experiments, was the frequent quenching induced by scattered electrons upstream of their (bifilar) device. Postulating that this quenching was precipitated by directly-scattered or bremsstrahlung-induced particle energy deposited into the SC material or into material contiguous with it, the importance of numerical and experimental characterizations of this phenomenon for linac-based, user-facility SC undulator design becomes evident. In this paper we discuss selected prior experimental results and report on initial EGS4 code studies of scattered and bremsstrahlung induced particle energy deposition into SC structures with geometries comparable to a small-bore bifilar helical undulator.

  5. Applied combustion

    SciTech Connect (OSTI)

    1993-12-31

    From the title, the reader is led to expect a broad practical treatise on combustion and combustion devices. Remarkably, for a book of modest dimension, the author is able to deliver. The text is organized into 12 Chapters, broadly treating three major areas: combustion fundamentals -- introduction (Ch. 1), thermodynamics (Ch. 2), fluid mechanics (Ch. 7), and kinetics (Ch. 8); fuels -- coal, municipal solid waste, and other solid fuels (Ch. 4), liquid (Ch. 5) and gaseous (Ch. 6) fuels; and combustion devices -- fuel cells (Ch. 3), boilers (Ch. 4), Otto (Ch. 10), diesel (Ch. 11), and Wankel (Ch. 10) engines and gas turbines (Ch. 12). Although each topic could warrant a complete text on its own, the author addresses each of these major themes with reasonable thoroughness. Also, the book is well documented with a bibliography, references, a good index, and many helpful tables and appendices. In short, Applied Combustion does admirably fulfill the author`s goal for a wide engineering science introduction to the general subject of combustion.

  6. Electron contamination modeling and reduction in a 1 T open bore inline MRI-linac system

    SciTech Connect (OSTI)

    Oborn, B. M.; Kolling, S.; Metcalfe, P. E.; Crozier, S.; Litzenberg, D. W.; Keall, P. J.

    2014-05-15

    Purpose: A potential side effect of inline MRI-linac systems is electron contamination focusing causing a high skin dose. In this work, the authors reexamine this prediction for an open bore 1 T MRI system being constructed for the Australian MRI-Linac Program. The efficiency of an electron contamination deflector (ECD) in purging electron contamination from the linac head is modeled, as well as the impact of a helium gas region between the deflector and phantom surface for lowering the amount of air-generated contamination. Methods: Magnetic modeling of the 1 T MRI was used to generate 3D magnetic field maps both with and without the presence of an ECD located immediately below the MLCs. Forty-seven different ECD designs were modeled and for each the magnetic field map was imported into Geant4 Monte Carlo simulations including the linac head, ECD, and a 30 30 30 cm{sup 3} water phantom located at isocenter. For the first generation system, the x-ray source to isocenter distance (SID) will be 160 cm, resulting in an 81.2 cm long air gap from the base of the ECD to the phantom surface. The first 71.2 cm was modeled as air or helium gas, with the latter encased between two windows of 50 ?m thick high density polyethlyene. 2D skin doses (at 70 ?m depth) were calculated across the phantom surface at 1 1 mm{sup 2} resolution for 6 MV beams of field size of 5 5, 10 10, and 20 20 cm{sup 2}. Results: The skin dose was predicted to be of similar magnitude as the generic systems modeled in previous work, 230% to 1400% ofD {sub max} for 5 5 to 20 20 cm{sup 2}, respectively. Inclusion of the ECD introduced a nonuniformity to the MRI imaging field that ranged from ?20 to ?140 ppm while the net force acting on the ECD ranged from ?151 N to ?1773 N. Various ECD designs were 100% efficient at purging the electron contamination into the ECD magnet banks; however, a small percentage were scattered back into the beam and continued to the phantom surface. Replacing a

  7. CX-012384: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Eleven Soil Bores Along the M-Area Abandoned Process Sewer Line for Vadose Zone Characterization CX(s) Applied: B3.1 Date: 05/19/2014 Location(s): South Carolina Offices(s): Savannah River Operations Office

  8. Arrangement for measuring the field angle of a magnetic field as a function of axial position within a magnet bore tube

    DOE Patents [OSTI]

    Pidcoe, Stephen V.; Zink, Roger A.; Boroski, William N.; McCaw, William R.

    1993-01-01

    An arrangement for measuring the field angle of a magnetic field as a function of axial position within a magnet bore tube of a magnet such as is used with the Superconducting Super Collider (SSC). The arrangement includes a magnetic field alignment gauge that is carried through the magnet bore tube by a positioning shuttle in predetermined increments. The positioning shuttle includes an extensible body assembly which is actuated by an internal piston arrangement. A pair of spaced inflatable cuffs are carried by the body assembly and are selectively actuated in cooperation with pressurizing of the piston to selectively drive the positioning shuttle in an axial direction. Control of the shuttle is provided by programmed electronic computer means located exteriorly of the bore tube and which controls valves provided pressurized fluid to the inflatable cuss and the piston arrangement.

  9. NOx Reduction with Natural Gas for Lean Large-Bore Engine Applications Using Lean NOx Trap Aftertreatment

    SciTech Connect (OSTI)

    Parks, JE

    2005-02-11

    Large-bore natural gas engines are used for distributed energy and gas compression since natural gas fuel offers a convenient and reliable fuel source via the natural gas pipeline and distribution infrastructure. Lean engines enable better fuel efficiency and lower operating costs; however, NOx emissions from lean engines are difficult to control. Technologies that reduce NOx in lean exhaust are desired to enable broader use of efficient lean engines. Lean NOx trap catalysts have demonstrated greater than 90% NOx reduction in lean exhaust from engines operating with gasoline, diesel, and natural gas fuels. In addition to the clean nature of the technology, lean NOx traps reduce NOx with the fuel source of the engine thereby eliminating the requirement for storage and handling of secondary fuels or reducing agents. A study of lean NOx trap catalysts for lean natural gas engines is presented here. Testing was performed on a Cummins C8.3G (CG-280) engine on a motor dynamometer. Lean NOx trap catalysts were tested for NOx reduction performance under various engine operating conditions, and the utilization of natural gas as the reductant fuel source was characterized. Engine test results show that temperature greatly affects the catalytic processes involved, specifically methane oxidation and NOx storage on the lean NOx trap. Additional studies on a bench flow reactor demonstrate the effect of precious metal loading (a primary cost factor) on lean NOx trap performance at different temperatures. Results and issues related to the potential of the lean NOx trap technology for large-bore engine applications will be discussed.

  10. Improvement of microwave feeding on a large bore ECRIS with permanent magnets by using coaxial semi-dipole antenna

    SciTech Connect (OSTI)

    Kurisu, Yosuke; Sakamoto, Naoki; Kiriyama, Ryutaro; Takenaka, Tomoya; Nozaki, Dai; Yano, Keisuke; Sato, Fuminobu; Kato, Yushi; Iida, Toshiyuki

    2012-11-06

    We are constructing a tandem type electron cyclotron resonance (ECR) ion source (ECRIS). The first stage of this ECRIS has a large-bore with cylindrically comb-shaped permanent magnets. 2.45GHz and 11-13GHz microwaves can be supplied individually and simultaneously to the plasma chamber. For 2.45GHz, a coaxial semi-dipole antenna is used to feed the microwaves. In previous experiments, there were two problems encountered when running the 2.45GHz microwaves. High incident power was necessary to keep ECR discharge at low operating pressure because of high reflected microwave power. The surface of a support insulator between the inner and the outer electrodes of coaxial semi-dipole antenna was easily metalized by sputtering of the metal wall inside the chamber. The purpose of this study was to solve these problems. Performing several simulation experiments supports the hypothesis that the position of the support insulator is significant for microwave power efficiency. The end result was the ability to sustain ECR discharges at extremely low incident microwave power, several tens of watts, by optimized matching of the position and shape of the insulator.

  11. MEASURED SPACE CONDITIONING PERFORMANCE OFA VERTICAL-BORE GROUND SOURCE HEAT PUMP (GSHP) OVER TWELVE MONTHS UNDER SIMULATED OCCUPANCY LOADS

    SciTech Connect (OSTI)

    Ally, Moonis Raza; Munk, Jeffrey D; Baxter, Van D; Gehl, Anthony C

    2014-01-01

    This paper presents monthly performance metrics of a 7.56 kW (2.16 ton) GSHP serving the space conditioning loads of a 251m2 (2700ft2) residential home with a phase change material in its envelope, and a single vertical-bore 94.5m (310 ft) ground loop. The same ground loop also serviced a ground source heat pump water heater. Envelope characteristics are discussed briefly in the context of reducing thermal losses. Data on entering water temperatures, energy extracted from the ground, energy delivered/removed, compressor electricity use, COP, GSHP run times (low and high compressor stages), and the impact of fan and pump energy consumption on efficiency are presented for each month. Both practical as well as research and development issues are discussed. The findings suggest that GSHPs represent a practical technology option to reduce source energy reduction and greenhouse emissions under the IECC 2012 Standard, as well as the European Union (EU) 2020 target of generating over 25% of heat consumed in the EU from renewable energy.

  12. How To Apply

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CSCNSI How To Apply How to Apply for Computer System, Cluster, and Networking Summer Institute Emphasizes practical skills development Contact Leader Stephan Eidenbenz (505)...

  13. SU-E-I-20: Comprehensive Quality Assurance Test of Second Generation Toshiba Aquilion Large Bore CT Simulator Based On AAPM TG-66 Recommendations

    SciTech Connect (OSTI)

    Zhang, D

    2015-06-15

    Purpose: AAPM radiation therapy committee task group No. 66 (TG-66) published a report which described a general approach to CT simulator QA. The report outlines the testing procedures and specifications for the evaluation of patient dose, radiation safety, electromechanical components, and image quality for a CT simulator. The purpose of this study is to thoroughly evaluate the performance of a second generation Toshiba Aquilion Large Bore CT simulator with 90 cm bore size (Toshiba, Nasu, JP) based on the TG-66 criteria. The testing procedures and results from this study provide baselines for a routine QA program. Methods: Different measurements and analysis were performed including CTDIvol measurements, alignment and orientation of gantry lasers, orientation of the tabletop with respect to the imaging plane, table movement and indexing accuracy, Scanogram location accuracy, high contrast spatial resolution, low contrast resolution, field uniformity, CT number accuracy, mA linearity and mA reproducibility using a number of different phantoms and measuring devices, such as CTDI phantom, ACR image quality phantom, TG-66 laser QA phantom, pencil ion chamber (Fluke Victoreen) and electrometer (RTI Solidose 400). Results: The CTDI measurements were within 20% of the console displayed values. The alignment and orientation for both gantry laser and tabletop, as well as the table movement and indexing and scanogram location accuracy were within 2mm as specified in TG66. The spatial resolution, low contrast resolution, field uniformity and CT number accuracy were all within ACR’s recommended limits. The mA linearity and reproducibility were both well below the TG66 threshold. Conclusion: The 90 cm bore size second generation Toshiba Aquilion Large Bore CT simulator that comes with 70 cm true FOV can consistently meet various clinical needs. The results demonstrated that this simulator complies with the TG-66 protocol in all aspects including electromechanical component

  14. Applied Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARC Privacy and Security Notice Skip over navigation Search the JLab Site Applied Research Center Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Applied Research Center ARC Home Consortium News EH&S Reports print version ARC Resources Commercial Tenants ARC Brochure Library Conference Room Applied Research Center Applied Research Center front view Applied Research

  15. Closed bore XMR (CBXMR) systems for aortic valve replacement: Active magnetic shielding of x-ray tubes

    SciTech Connect (OSTI)

    Bracken, John A.; DeCrescenzo, Giovanni; Komljenovic, Philip; Lillaney, Prasheel V.; Fahrig, Rebecca; Rowlands, J. A.

    2009-05-15

    Hybrid closed bore x-ray/MRI systems are being developed to improve the safety and efficacy of percutaneous aortic valve replacement procedures by harnessing the complementary strengths of the x-ray and MRI modalities in a single interventional suite without requiring patient transfer between two rooms. These systems are composed of an x-ray C-arm in close proximity ({approx_equal}1 m) to an MRI scanner. The MRI magnetic fringe field can cause the electron beam in the x-ray tube to deflect. The deflection causes the x-ray field of view to shift position on the detector receptacle. This could result in unnecessary radiation exposure to the patient and the staff in the cardiac catheterization laboratory. Therefore, the electron beam deflection must be corrected. The authors developed an active magnetic shielding system that can correct for electron beam deflection to within an accuracy of 5% without truncating the field of view or increasing exposure to the patient. This system was able to automatically adjust to different field strengths as the external magnetic field acting on the x-ray tube was changed. Although a small torque was observed on the shielding coils of the active shielding system when they were placed in a magnetic field, this torque will not impact their performance if they are securely mounted on the x-ray tube and the C-arm. The heating of the coils of the shielding system for use in the clinic caused by electric current was found to be slow enough not to require a dedicated cooling system for one percutaneous aortic valve replacement procedure. However, a cooling system will be required if multiple procedures are performed in one session.

  16. Applied & Computational Math

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Computational Math - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us ... Twitter Google + Vimeo GovDelivery SlideShare Applied & Computational Math HomeEnergy ...

  17. Applied Computer Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Applied Computer Science Innovative co-design of applications, algorithms, and architectures in order to enable scientific simulations at extreme scale Leadership Group Leader ...

  18. Applied Science/Techniques

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied ScienceTechniques Print The ALS is an excellent incubator of new scientific techniques and instrumentation. Many of the technical advances that make the ALS a world-class...

  19. How To Apply

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How To Apply How to Apply for Computer System, Cluster, and Networking Summer Institute Emphasizes practical skills development Contacts Program Lead Carolyn Connor (505) 665-9891 Email Professional Staff Assistant Nickole Aguilar Garcia (505) 665-3048 Email The 2016 application process will commence January 5 through February 13, 2016. Applicants must be U.S. citizens. Required Materials Current resume Official university transcript (with Spring courses posted and/or a copy of Spring 2016

  20. CX-007139: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9: Categorical Exclusion Determination CX-007139: Categorical Exclusion Determination Electrical District 2- Electrical District 5 Geological Boring CX(s) Applied: B3.1 Date: 05/16/2011 Location(s): Pinal County, Arizona Office(s): Western Area Power Administration-Desert Southwest Region Western proposes to do geologic borings within our right-of-way near structures 21/5, 22/5, 23/6, 25/4, 26/5, 27/6, 28/5, 29/5 & 30/4 along the existing electrical district (ED) #2-ED5 230-kilovolt

  1. Apply for Beamtime

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply for Beamtime Apply for Beamtime Print Friday, 28 August 2009 13:23 Available Beamlines Determine which ALS beamlines are suitable for your experiment. To do this, you can review the ALS Beamlines Directory, contact the appropriate beamline scientist listed on the Directory, and/or contact the This e-mail address is being protected from spambots. You need JavaScript enabled to view it . Log In to the ALSHub user portal ALSHub Login For More Information About the Types of Proposals To learn

  2. Final Data Report: P- and S-Wave Velocity Logging Borings C4993, C4996, and C4997 Part B: Overall Logs

    SciTech Connect (OSTI)

    Diehl, John; Steller, Robert

    2007-03-20

    Insitu borehole P- and S-wave velocity measurements were collected in three borings located within the Waste Treatment Plant (WTP) boundaries at the Hanford Site, southeastern Washington. Geophysical data acquisition was performed between August and October of 2006 by Rob Steller, Charles Carter, Antony Martin and John Diehl of GEOVision. Data analysis was performed by Rob Steller and John Diehl, and reviewed by Antony Martin of GEOVision, and report preparation was performed by John Diehl and reviewed by Rob Steller. The work was performed under subcontract with Battelle, Pacific Northwest Division with Marty Gardner as Battelles Technical Representative and Alan Rohay serving as the Technical Administrator for Pacific Northwest National Laboratory (PNNL). This report describes the field measurements, data analysis, and results of this work.

  3. Applied Cathode Enhancement and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied Cathode Enhancement and Robustness Technologies (ACERT) Team Our project team, a part of Los Alamos National Laboratory (LANL) comprised of world leading experts from fields of accelerator design & testing, chemical synthesis of nanomaterials (quantum dots), and shielding application of nanomaterials (graphene and other atomically-thin sheets). Our goal is to develop and demonstrate 'designer' cold cathode electron sources with tunable parameters (bandgap, efficiency, optical

  4. Applied Computer Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Applied Computer Science Innovative co-design of applications, algorithms, and architectures in order to enable scientific simulations at extreme scale Leadership Group Leader Linn Collins Email Deputy Group Leader (Acting) Bryan Lally Email Climate modeling visualization Results from a climate simulation computed using the Model for Prediction Across Scales (MPAS) code. This visualization shows the temperature of ocean currents using a green and blue color scale. These colors were

  5. Applied Modern Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Applied Modern Physics From the first bionic eye to airport scanners that detect liquid explosives, our expertise in developing advanced diagnostics results in real-world innovations. Contact Us Group Leader (acting) John George Email Deputy Group Leader Larry Schultz Email Group Office (505) 665-2545 Email QkarD Quantum key distribution technology could ensure truly secure commerce, banking, communications and data transfer. Read more... A history of excellence in the development and use of

  6. Applied ALARA techniques

    SciTech Connect (OSTI)

    Waggoner, L.O.

    1998-02-05

    The presentation focuses on some of the time-proven and new technologies being used to accomplish radiological work. These techniques can be applied at nuclear facilities to reduce radiation doses and protect the environment. The last reactor plants and processing facilities were shutdown and Hanford was given a new mission to put the facilities in a safe condition, decontaminate, and prepare them for decommissioning. The skills that were necessary to operate these facilities were different than the skills needed today to clean up Hanford. Workers were not familiar with many of the tools, equipment, and materials needed to accomplish:the new mission, which includes clean up of contaminated areas in and around all the facilities, recovery of reactor fuel from spent fuel pools, and the removal of millions of gallons of highly radioactive waste from 177 underground tanks. In addition, this work has to be done with a reduced number of workers and a smaller budget. At Hanford, facilities contain a myriad of radioactive isotopes that are 2048 located inside plant systems, underground tanks, and the soil. As cleanup work at Hanford began, it became obvious early that in order to get workers to apply ALARA and use hew tools and equipment to accomplish the radiological work it was necessary to plan the work in advance and get radiological control and/or ALARA committee personnel involved early in the planning process. Emphasis was placed on applying,ALARA techniques to reduce dose, limit contamination spread and minimize the amount of radioactive waste generated. Progress on the cleanup has,b6en steady and Hanford workers have learned to use different types of engineered controls and ALARA techniques to perform radiological work. The purpose of this presentation is to share the lessons learned on how Hanford is accomplishing radiological work.

  7. Apply for Beamtime

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply for Beamtime Print Available Beamlines Determine which ALS beamlines are suitable for your experiment. To do this, you can review the ALS Beamlines Directory, contact the appropriate beamline scientist listed on the Directory, and/or contact the This e-mail address is being protected from spambots. You need JavaScript enabled to view it . Log In to the ALSHub user portal ALSHub Login For More Information About the Types of Proposals To learn more about the three different types of

  8. Apply for Beamtime

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply for Beamtime Print Available Beamlines Determine which ALS beamlines are suitable for your experiment. To do this, you can review the ALS Beamlines Directory, contact the appropriate beamline scientist listed on the Directory, and/or contact the This e-mail address is being protected from spambots. You need JavaScript enabled to view it . Log In to the ALSHub user portal ALSHub Login For More Information About the Types of Proposals To learn more about the three different types of

  9. ORISE: Applied health physics projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied health physics projects The Oak Ridge Institute for Science and Education (ORISE) provides applied health physics services to government agencies needing technical support ...

  10. Information Science, Computing, Applied Math

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Science, Computing, Applied Math Information Science, Computing, Applied Math National security depends on science and technology. The United States relies on Los ...

  11. Exergy Analysis of a Two-Stage Ground Source Heat Pump with a Vertical Bore for Residential Space Conditioning under Simulated Occupancy

    SciTech Connect (OSTI)

    Ally, Moonis Raza; Munk, Jeffrey D; Baxter, Van D; Gehl, Anthony C

    2015-01-01

    This twelve-month field study analyzes the performance of a 7.56W (2.16- ton) water-to-air-ground source heat pump (WA-GSHP) to satisfy domestic space conditioning loads in a 253 m2 house in a mixed-humid climate in the United States. The practical feasibility of using the ground as a source of renewable energy is clearly demonstrated. Better than 75% of the energy needed for space heating was extracted from the ground. The average monthly electricity consumption for space conditioning was only 40 kWh at summer and winter thermostat set points of 24.4oC and 21.7oC, respectively. The WA-GSHP shared the same 94.5 m vertical bore ground loop with a separate water-to-water ground-source heat pump (WW-GSHP) for meeting domestic hot water needs in the same house. Sources of systemic irreversibility, the main cause of lost work are identified using Exergy and energy analysis. Quantifying the sources of Exergy and energy losses is essential for further systemic improvements. The research findings suggest that the WA-GSHPs are a practical and viable technology to reduce primary energy consumption and greenhouse gas emissions under the IECC 2012 Standard, as well as the European Union (EU) 2020 targets of using renewable energy resources.

  12. Data, exergy, and energy analysis of a vertical-bore, ground-source heat pump to for domestic water heating under simulated occupancy conditions

    SciTech Connect (OSTI)

    Ally, Moonis Raza; Munk, Jeffrey D; Baxter, Van D; Gehl, Anthony C

    2015-01-01

    Evidence is provided to support the view that greater than two-thirds of energy required to produce domestic hot water may be extracted from the ground which serves as renewable energy resource. The case refers to a 345 m2 research house located in Oak Ridge, Tennessee, 36.01 N 84.26 W in a mixed-humid climate with HDD of 2218 C-days (3993 F-days) and CDD of 723 C-days (1301 F-days). The house is operated under simulated occupancy conditions in which the hot water use protocol is based on the Building America Research Benchmark Definition (Hendron 2008; Hendron and Engebrecht 2010) which captures the water consumption lifestyles of the average family in the United States. The 5.275 (1.5-ton) water-to-water ground source heat pump (WW-GSHP) shared the same vertical bore with a 7.56 KW water-to-air ground source heat pump for space conditioning the same house. Energy and exergy analysis of data collected continuously over a twelve month period provide performance metrics and sources of inherent systemic inefficiencies. Data and analyses are vital to better understand how WW-GSHPs may be further improved to enable the ground to be used as a renewable energy resource.

  13. Data, exergy, and energy analysis of a vertical-bore, ground-source heat pump to for domestic water heating under simulated occupancy conditions

    SciTech Connect (OSTI)

    Ally, Moonis Raza; Munk, Jeffrey D.; Baxter, Van D.; Gehl, Anthony C.

    2015-05-27

    Evidence is provided to support the view that greater than two-thirds of energy required to produce domestic hot water may be extracted from the ground which serves as renewable energy resource. The case refers to a 345 m2 research house located in Oak Ridge, Tennessee, 36.01 N 84.26 W in a mixed-humid climate with HDD of 2218 C-days (3993 F-days) and CDD of 723 C-days (1301 F-days). The house is operated under simulated occupancy conditions in which the hot water use protocol is based on the Building America Research Benchmark Definition (Hendron 2008; Hendron and Engebrecht 2010) which captures the water consumption lifestyles of the average family in the United States. The 5.275 (1.5-ton) water-to-water ground source heat pump (WW-GSHP) shared the same vertical bore with a 7.56 KW water-to-air ground source heat pump for space conditioning the same house. Energy and exergy analysis of data collected continuously over a twelve month period provide performance metrics and sources of inherent systemic inefficiencies. Data and analyses are vital to better understand how WW-GSHPs may be further improved to enable the ground to be used as a renewable energy resource.

  14. Exergy Analysis of a Two-Stage Ground Source Heat Pump with a Vertical Bore for Residential Space Conditioning under Simulated Occupancy

    SciTech Connect (OSTI)

    Ally, Moonis Raza; Munk, Jeffrey D.; Baxter, Van D.; Gehl, Anthony C.

    2015-06-26

    This twelve-month field study analyzes the performance of a 7.56W (2.16- ton) water-to-air-ground source heat pump (WA-GSHP) to satisfy domestic space conditioning loads in a 253 m2 house in a mixed-humid climate in the United States. The practical feasibility of using the ground as a source of renewable energy is clearly demonstrated. Better than 75% of the energy needed for space heating was extracted from the ground. The average monthly electricity consumption for space conditioning was only 40 kWh at summer and winter thermostat set points of 24.4°C and 21.7°C, respectively. The WA-GSHP shared the same 94.5 m vertical bore ground loop with a separate water-to-water ground-source heat pump (WW-GSHP) for meeting domestic hot water needs in the same house. Sources of systemic irreversibility, the main cause of lost work are identified using Exergy and energy analysis. Quantifying the sources of Exergy and energy losses is essential for further systemic improvements. The research findings suggest that the WA-GSHPs are a practical and viable technology to reduce primary energy consumption and greenhouse gas emissions under the IECC 2012 Standard, as well as the European Union (EU) 2020 targets of using renewable energy resources.

  15. Data, exergy, and energy analysis of a vertical-bore, ground-source heat pump to for domestic water heating under simulated occupancy conditions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ally, Moonis Raza; Munk, Jeffrey D.; Baxter, Van D.; Gehl, Anthony C.

    2015-05-27

    Evidence is provided to support the view that greater than two-thirds of energy required to produce domestic hot water may be extracted from the ground which serves as renewable energy resource. The case refers to a 345 m2 research house located in Oak Ridge, Tennessee, 36.01 N 84.26 W in a mixed-humid climate with HDD of 2218 C-days (3993 F-days) and CDD of 723 C-days (1301 F-days). The house is operated under simulated occupancy conditions in which the hot water use protocol is based on the Building America Research Benchmark Definition (Hendron 2008; Hendron and Engebrecht 2010) which captures themore » water consumption lifestyles of the average family in the United States. The 5.275 (1.5-ton) water-to-water ground source heat pump (WW-GSHP) shared the same vertical bore with a 7.56 KW water-to-air ground source heat pump for space conditioning the same house. Energy and exergy analysis of data collected continuously over a twelve month period provide performance metrics and sources of inherent systemic inefficiencies. Data and analyses are vital to better understand how WW-GSHPs may be further improved to enable the ground to be used as a renewable energy resource.« less

  16. Applied Optoelectronics | Open Energy Information

    Open Energy Info (EERE)

    optical semiconductor devices, packaged optical components, optical subsystems, laser transmitters, and fiber optic transceivers. References: Applied Optoelectronics1...

  17. Apply

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unofficial transcripts are acceptable. If transcripts are not in English, provide a translation. If grades are not in the U.S.-traditional lettered (A,B,C), or GPA (out of 4.0)...

  18. Applied Materials | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to apply the resulting insights to the design, synthesis, and testing of materials with improved properties and performance, including accident-tolerant and higher burn-up fuels. ...

  19. Applied Materials | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Applied Materials Address: 3050 Bowers Avenue Place: Santa Clara, California Zip: 95054 Sector: Solar Website: www.appliedmaterials.com...

  20. Applied Sedimentology | Open Energy Information

    Open Energy Info (EERE)

    Sedimentology Jump to: navigation, search OpenEI Reference LibraryAdd to library Book: Applied Sedimentology Author R.C. Salley Published Academic Press, 2000 DOI Not Provided...

  1. ORISE: Applied health physics projects

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied health physics projects The Oak Ridge Institute for Science and Education (ORISE) provides applied health physics services to government agencies needing technical support for decommissioning projects. Whether the need is assistance with the development of technical basis documents or advice on how to identify, measure and assess the presence of radiological materials, ORISE can help determine the best course for an environmental cleanup project. Our key areas of expertise include fuel

  2. Information Science, Computing, Applied Math

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Science, Computing, Applied Math Information Science, Computing, Applied Math National security depends on science and technology. The United States relies on Los Alamos National Laboratory for the best of both. No place on Earth pursues a broader array of world-class scientific endeavors. Computer, Computational, and Statistical Sciences (CCS)» High Performance Computing (HPC)» Extreme Scale Computing, Co-design» supercomputing into the future Overview Los Alamos Asteroid Killer

  3. Physical Chemistry and Applied Spectroscopy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PCS Physical Chemistry and Applied Spectroscopy We perform basic and applied research in support of the Laboratory's national security mission and serve a wide range of customers. Contact Us Group Leader Kirk Rector Deputy Group Leader Jeff Pietryga Group Office (505) 667-7121 Postdoctoral researcher Young-Shin Park characterizing emission spectra of LEDs in the Los Alamos National Laboratory optical laboratory. Postdoctoral researcher Young-Shin Park characterizing emission spectra of LEDs in

  4. CRC handbook of applied thermodynamics

    SciTech Connect (OSTI)

    Palmer, D.A. . Research and Development Dept.)

    1987-01-01

    The emphasis of this book is on applied thermodynamics, featuring the stage of development of a process rather than the logical development of thermodynamic principles. It is organized according to the types of problems encountered in industry, such as probing research, process assessment, and process development. The applied principles presented can be used in most areas of industry including oil and gas production and processing, chemical processing, power generation, polymer production, food processing, synthetic fuels production, specialty chemicals and pharmaceuticals production, bioengineered processes, etc.

  5. Applied Mathematics and Plasma Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Applied Mathematics and Plasma Physics Maintaining mathematic, theory, modeling, and simulation capabilities in a broad set of areas Leadership Group Leader Pieter Swart Email Deputy Group Leader (Acting) Luis Chacon Email Contact Us Administrator Charlotte Lehman Email Electron density simulation Electron density from an orbital-free quantum molecular dynamics simulation for a warm dense plasma of deuterium at density 10 g/cc and temperature 10 eV. Mathematical, theory, modeling, and

  6. Summer of Applied Geophysical Experience

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summer of Applied Geophysical Experience (SAGE) 2016 - Our 34 rd Year! SAGE is a 3-4 week research and education program in exploration geophysics for graduate, undergraduate students, and working professionals based in Santa Fe, NM, U.S.A. Application deadline March 27, 2016, 5:00pm MDT SAGE students, faculty, teaching assistants, and visiting scientists acquire, process and interpret reflection/refraction seismic, magnetotelluric (MT)/electromagnetic (EM), ground penetrating radar (GPR),

  7. International combustion engines; Applied thermosciences

    SciTech Connect (OSTI)

    Ferguson, C.R.

    1985-01-01

    Focusing on thermodynamic analysis - from the requisite first law to more sophisticated applications - and engine design, this book is an introduction to internal combustion engines and their mechanics. It covers the many types of internal combustion engines, including spark ignition, compression ignition, and stratified charge engines, and examines processes, keeping equations of state simple by assuming constant specific heats. Equations are limited to heat engines and later applied to combustion engines. Topics include realistic equations of state, stroichiometry, predictions of chemical equilibrium, engine performance criteria, and friction, which is discussed in terms of the hydrodynamic theory of lubrication and experimental methods such as dimensional analysis.

  8. Measured water heating performance of a vertical-bore water-to-water ground source heat pump (WW-GSHP) for domestic water heating over twelve months under simulated occupancy loads

    SciTech Connect (OSTI)

    Ally, Moonis Raza; Munk, Jeffrey D; Baxter, Van D; Gehl, Anthony C

    2014-01-01

    This paper presents monthly performance metrics of a 5.275 kW (1.5 ton) WW-GSHP providing 227 L day-1 domestic hot water at 49 C. Daily water use is simulated as stipulated in the Building America Research Benchmark Definition capturing the living habits of the average U.S household. The 94.5m vertical-bore ground loop is shared with a separate GSHP for space conditioning the 251m2 residential home. Data on entering water temperatures, energy extracted from the ground, delivered energy, compressor electricity use, COP, WW-GSHP run times, and the impact of fan and pump energy consumption on efficiency are presented for each month. Factors influencing performance metrics are highlighted.

  9. Apply to the Cyclotron Institute REU Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply Now Applying for the 2016 NSF-REU Nuclear Physics and Nuclear Chemistry Program at the Cyclotron Institute (APPLICATION DEADLINE HAS PASSED. Please check back in Fall 2016 to apply for Summer 2017)

  10. Applied Intellectual Capital AIC | Open Energy Information

    Open Energy Info (EERE)

    Intellectual Capital AIC Jump to: navigation, search Name: Applied Intellectual Capital (AIC) Place: California Zip: 94501-1010 Product: Applied Intellectual Capital (AIC) was...

  11. Applied Materials Wind Turbine | Open Energy Information

    Open Energy Info (EERE)

    Wind Turbine Jump to: navigation, search Name Applied Materials Wind Turbine Facility Applied Materials Sector Wind energy Facility Type Community Wind Facility Status In Service...

  12. Building America Expert Meeting: Recommendations for Applying...

    Energy Savers [EERE]

    Recommendations for Applying Water Heaters in Combination Space and Domestic Water Heating Systems Building America Expert Meeting: Recommendations for Applying Water Heaters in ...

  13. Applied Ventures LLC | Open Energy Information

    Open Energy Info (EERE)

    Applied Ventures LLC Name: Applied Ventures LLC Address: 3050 Bowers Avenue Place: Santa Clara, California Zip: 95054 Region: Southern CA Area Product: Venture capital. Number...

  14. How to Apply for the ENERGY STAR®

    Broader source: Energy.gov [DOE]

    Join us to learn about applying for ENERGY STAR Certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see the step-by-step process of applying, and gain tips to...

  15. Apply for Beam Time | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    All About Proposals Users Home Apply for Beam Time Deadlines Proposal Types Concepts, Definitions, and Help My APS Portal My APS Portal Apply for Beam Time Next Proposal Deadline...

  16. Applying for PMCDP/FPD Certification (initial)

    Broader source: Energy.gov [DOE]

    Certification applicants are nominated by their respective Program Secretarial Office (PSO) to apply for FPD certification – candidates may not apply without program sponsorship. Each participating...

  17. Applied Field Research Initiative Deep Vadose Zone

    Office of Environmental Management (EM)

    Applied Field Research Initiative Deep Vadose Zone Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of preventing contamination in the deep vadose zone from reaching groundwater. Led by the Pacific Northwest National Laboratory, the Initiative is a collaborative effort that leverages Department of Energy (DOE) investments in basic science and applied

  18. Applied Quantum Technology AQT | Open Energy Information

    Open Energy Info (EERE)

    Quantum Technology AQT Jump to: navigation, search Name: Applied Quantum Technology (AQT) Place: Santa Clara, California Zip: 95054 Product: California-based manufacturer of CIGS...

  19. Applied Energy Management | Open Energy Information

    Open Energy Info (EERE)

    Energy Management Jump to: navigation, search Name: Applied Energy Management Place: Huntersville, North Carolina Zip: 28078 Sector: Efficiency, Renewable Energy Product: North...

  20. Applied Materials Inc AMAT | Open Energy Information

    Open Energy Info (EERE)

    manufacturer of equipment used in solar (silicon, thin-film, BIPV), semiconductor, and LCD markets. References: Applied Materials Inc (AMAT)1 This article is a stub. You can...

  1. Nuclear Facilities and Applied Technologies at Sandia

    SciTech Connect (OSTI)

    Wheeler, Dave; Kaiser, Krista; Martin, Lonnie; Hanson, Don; Harms, Gary; Quirk, Tom

    2014-11-28

    The Nuclear Facilities and Applied Technologies organization at Sandia National Laboratories Technical Area Five (TA-V) is the leader in advancing nuclear technologies through applied radiation science and unique nuclear environments. This video describes the organizations capabilities, facilities, and culture.

  2. Pi in Applied Optics | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inside the Applied Optics Lab II Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) The sPI CAM: Inside the Applied Optics Lab II The sPI Cam visits the Applied Optics Lab to see how Mark Meyers, a physicist and optical engineer at GE Global Research, uses Pi. You Might Also Like lightning bolt We One-Upped Ben Franklin,

  3. Overview of the NMSEA applied research program

    SciTech Connect (OSTI)

    Stickney, B.; Wilson, A.

    1980-01-01

    Recently the NMSEA has seen the need to augment its other informational programs with a program of in-house applied research. The reasoning behind this move is presented here along with and accounting of past research activities.

  4. Applied Energy Programs, SPO-AE: LANL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Karl Jonietz 505-663-5539 Program Manager Melissa Fox 505-663-5538 Budget Analyst Fawn Gore 505-665-0224 The Applied Energy Program Office (SPO-AE) manages Los Alamos National...

  5. SAGE, Summer of Applied Geophysical Experience

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply Who Qualifies Special Undergrad Information Contributors Faculty Past Programs Photo Gallery NSEC » CSES » SAGE SAGE, the Summer of Applied Geophysical Experience A National Science Foundation Research Experiences for Undergraduates program Contacts Institute Director Reinhard Friedel-Los Alamos SAGE Co-Director W. Scott Baldridge-Los Alamos SAGE Co-Director Larry Braile-Purdue University Professional Staff Assistant Georgia Sanchez (505) 665-0855 Email SAGE Class of 2016 SAGE 2016

  6. How to Apply | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    How to Apply How to Apply Online Application Available at www.zintellect.com/Posting/Details/1997 Application deadline May 20, 2016. Familiarize yourself with the benefits, obligations, eligibility requirements, and evaluation criteria. Familiarize yourself with the requirements and obligations to determine whether your education and professional goals are well aligned with the EERE Postdoctoral Research Awards. Read the Evaluation Criteria that will be used to evaluate your application. It is

  7. LANSCE | Lujan Center | Apply for Beamtime

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply for Beamtime LANSCE User Resources Tips for a Successful Proposal Step 1: Apply for Beam Time 1. Select an Instrument and a Local Contact 2. Submit Your Proposal Step 2: Before You Arrive 1. Complete the LANSCE User Facility Agreement Questionnaire 2. Arrange for Site Access 3. Prepare for Your Experiment: Contact Lujan Experiment Coordinator to arrange shipping of your samples. Talk to the beamline scientist about any electrical equipment you might bring. 4. Complete your training Step 3:

  8. Categorical Exclusion Determinations: Advanced Technology Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reequipping and Engineering CX(s) Applied: B1.31, B5.1 Date: 09062011 ... Aptera All-Electric and Hybrid Electric Vehicles CX(s) Applied: B1.31, B5.1 Date: 0620...

  9. Categorical Exclusion Determinations: Western Area PowerAdministratio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reconstruction of the V.T. Hanlon Substation CX(s) Applied: B4.11 Date: 03232015 ... Reconstruction of the V.T. Hanlon Substation CX(s) Applied: B4.11 Date: 03232015 ...

  10. Method of applying coatings to substrates

    DOE Patents [OSTI]

    Hendricks, Charles D.

    1991-01-01

    A method for applying novel coatings to substrates is provided. The ends of multiplicity of rods of different materials are melted by focused beams of laser light. Individual electric fields are applied to each of the molten rod ends, thereby ejecting charged particles that include droplets, atomic clusters, molecules, and atoms. The charged particles are separately transported, by the accelerations provided by electric potentials produced by an electrode structure, to substrates where they combine and form the coatings. Layered and thickness graded coatings comprised of hithereto unavailable compositions, are provided.

  11. How to Apply for Senior Executive positions

    Broader source: Energy.gov [DOE]

    To apply vacancies for SENIOR EXECUTIVE SERVICE (SES) , SENIOR LEVEL (SL), SCIENTIFIC AND PROFESSIONAL (ST) positions within the Department of Energy please visit OPM's website: http://www.usajobs.gov. From this site, you may download announcements for vacancies of interest to you.

  12. (Applied mass spectrometry in the health sciences)

    SciTech Connect (OSTI)

    Glish, G.L.

    1990-05-03

    The traveler attended the 2nd International Symposium on Applied Mass Spectrometry in the Health Sciences and presented and invited paper. Papers presented that were of interest to ORNL mass spectrometry programs involved ionization of large molecules by electrospray and laser desorption. Other papers of interest included applications of MS/MS for structural elucidation and new instrumentation.

  13. Uniform insulation applied-B ion diode

    DOE Patents [OSTI]

    Seidel, David B.; Slutz, Stephen A.

    1988-01-01

    An applied-B field extraction ion diode has uniform insulation over an anode surface for increased efficiency. When the uniform insulation is accomplished with anode coils, and a charge-exchange foil is properly placed, the ions may be focused at a point on the z axis.

  14. Applied Mathematics Conferences and Workshops | U.S. DOE Office...

    Office of Science (SC) Website

    ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced ...

  15. Applied Cathode Enhancement and Robustness Technologies (ACERT)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Accelerators, Electrodynamics » ACERT Applied Cathode Enhancement and Robustness Technologies (ACERT) World leading experts from fields of accelerator design & testing, chemical synthesis of nanomaterials, and shielding application of nanomaterials. thumbnail of Nathan Moody Nathan Moody Principal Investigator (PI) Email ACERT Logo Team Our project team, a part of Los Alamos National Laboratory (LANL) comprised of world leading experts from fields of accelerator design & testing,

  16. Summer of Applied Geophysical Experience Reading List

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Geophysical Experience Reading List Summer of Applied Geophysical Experience Reading List A National Science Foundation Research Experiences for Undergraduates program Contacts Institute Director Reinhard Friedel-Los Alamos SAGE Co-Director W. Scott Baldridge-Los Alamos SAGE Co-Director Larry Braile-Purdue University Professional Staff Assistant Georgia Sanchez (505) 665-0855 Keller, R., Khan, M. A., Morgan, P., et al., 1991, A Comparative Study of the Rio Grande and Kenya rifts, Tectonophys.,

  17. Apply for a Job | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FAQs Answers to frequently asked questions about applying for a job at Argonne A Note About Privacy We do not ask you for personally identifiable information such as birthdate, social security number, or driver's license number. To ensure your privacy, please do not include such information in the documents that you upload to the system A Note About File Size Our application system has a file size limit of 820KB. While this is sufficient for the vast majority of documents, we have found that

  18. 2009 Applied and Environmental Microbiology GRC

    SciTech Connect (OSTI)

    Nicole Dubilier

    2009-07-12

    The topic of the 2009 Gordon Conference on Applied and Environmental Microbiology is: From Single Cells to the Environment. The Conference will present and discuss cutting-edge research on applied and environmental microbiology with a focus on understanding interactions between microorganisms and the environment at levels ranging from single cells to complex communities. The Conference will feature a wide range of topics such as single cell techniques (including genomics, imaging, and NanoSIMS), microbial diversity at scales ranging from clonal to global, environmental 'meta-omics', biodegradation and bioremediation, metal - microbe interactions, animal microbiomes and symbioses. The Conference will bring together investigators who are at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present their work in poster format and exchange ideas with leaders in the field. Some poster presenters will be selected for short talks. The collegial atmosphere of this Conference, with extensive discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an ideal setting for scientists from different disciplines to exchange ideas, brainstorm and discuss cross-disciplinary collaborations.

  19. Pulsed-coil magnet systems for applying uniform 10–30 T fields to centimeter-scale targets on Sandia's Z facility

    SciTech Connect (OSTI)

    Rovang, D. C. Lamppa, D. C.; Cuneo, M. E.; Owen, A. C.; McKenney, J.; Johnson, D. W.; Radovich, S.; Kaye, R. J.; McBride, R. D.; Alexander, C. S.; Awe, T. J.; Slutz, S. A.; Sefkow, A. B.; Haill, T. A.; Jones, P. A.; Argo, J. W.; Dalton, D. G.; Robertson, G. K.; Waisman, E. M.; Sinars, D. B.; and others

    2014-12-15

    Sandia has successfully integrated the capability to apply uniform, high magnetic fields (10–30 T) to high energy density experiments on the Z facility. This system uses an 8-mF, 15-kV capacitor bank to drive large-bore (5 cm diameter), high-inductance (1–3 mH) multi-turn, multi-layer electromagnets that slowly magnetize the conductive targets used on Z over several milliseconds (time to peak field of 2–7 ms). This system was commissioned in February 2013 and has been used successfully to magnetize more than 30 experiments up to 10 T that have produced exciting and surprising physics results. These experiments used split-magnet topologies to maintain diagnostic lines of sight to the target. We describe the design, integration, and operation of the pulsed coil system into the challenging and harsh environment of the Z Machine. We also describe our plans and designs for achieving fields up to 20 T with a reduced-gap split-magnet configuration, and up to 30 T with a solid magnet configuration in pursuit of the Magnetized Liner Inertial Fusion concept.

  20. Pulsed-coil magnet systems for applying 10-30 Tesla Fields to cm-scale targets on Sandia's Z facility

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rovang, Dean C.; Lamppa, Derek C.; Cuneo, Michael Edward; Owen, Albert; Mckenney, John; Johnson, Drew; Radovich, Shawn; Kaye, Ronald J.; McBride, Ryan D; Alexander, C. Scott; et al

    2014-12-04

    We have successfully integrated the capability to apply uniform, high magnetic fields (10–30 T) to high energy density experiments on the Z facility. This system uses an 8-mF, 15-kV capacitor bank to drive large-bore (5 cm diameter), high-inductance (1–3 mH) multi-turn, multi-layer electromagnets that slowly magnetize the conductive targets used on Z over several milliseconds (time to peak field of 2–7 ms). This system was commissioned in February 2013 and has been used successfully to magnetize more than 30 experiments up to 10 T that have produced exciting and surprising physics results. These experiments used split-magnet topologies to maintain diagnosticmore » lines of sight to the target. We then describe the design, integration, and operation of the pulsed coil system into the challenging and harsh environment of the Z Machine. We also describe our plans and designs for achieving fields up to 20 T with a reduced-gap split-magnet configuration, and up to 30 T with a solid magnet configuration in pursuit of the Magnetized Liner Inertial Fusion concept.« less

  1. Pulsed-coil magnet systems for applying 10-30 Tesla Fields to cm-scale targets on Sandia's Z facility

    SciTech Connect (OSTI)

    Rovang, Dean C.; Lamppa, Derek C.; Cuneo, Michael Edward; Owen, Albert; Mckenney, John; Johnson, Drew; Radovich, Shawn; Kaye, Ronald J.; McBride, Ryan D; Alexander, C. Scott; Awe, Thomas James; Slutz, Stephen A.; Sefkow, Adam B; Haill, Thomas A.; Jones, Peter Andrew; Argo, Jeffrey W; Dalton, Devon; Robertson, Grafton Kincannon; Waisman, Eduardo Mario; Sinars, Daniel Brian; Meissner, Joel; Milhous, Mark; Nguyen, Doan; Mielke, Chuck

    2014-12-04

    We have successfully integrated the capability to apply uniform, high magnetic fields (10–30 T) to high energy density experiments on the Z facility. This system uses an 8-mF, 15-kV capacitor bank to drive large-bore (5 cm diameter), high-inductance (1–3 mH) multi-turn, multi-layer electromagnets that slowly magnetize the conductive targets used on Z over several milliseconds (time to peak field of 2–7 ms). This system was commissioned in February 2013 and has been used successfully to magnetize more than 30 experiments up to 10 T that have produced exciting and surprising physics results. These experiments used split-magnet topologies to maintain diagnostic lines of sight to the target. We then describe the design, integration, and operation of the pulsed coil system into the challenging and harsh environment of the Z Machine. We also describe our plans and designs for achieving fields up to 20 T with a reduced-gap split-magnet configuration, and up to 30 T with a solid magnet configuration in pursuit of the Magnetized Liner Inertial Fusion concept.

  2. FY 1990 Applied Sciences Branch annual report

    SciTech Connect (OSTI)

    Keyes, B.M.; Dippo, P.C.

    1991-11-01

    The Applied Sciences Branch actively supports the advancement of DOE/SERI goals for the development and implementation of the solar photovoltaic technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility which is capable of providing information on the full range of photovoltaic components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of photovoltaic technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. This report contains information on surface and interface analysis, materials characterization, development, electro-optical characterization module testing and performance, surface interactions and FTIR spectroscopy.

  3. Energy Department Extends Deadline to Apply for START Tribal...

    Energy Savers [EERE]

    Extends Deadline to Apply for START Tribal Renewable Energy Project Development Assistance to May 22, 2015 Energy Department Extends Deadline to Apply for START Tribal Renewable...

  4. An exact general remeshing scheme applied to physically conservative...

    Office of Scientific and Technical Information (OSTI)

    Published Article: An exact general remeshing scheme applied to physically conservative voxelization Title: An exact general remeshing scheme applied to physically conservative ...

  5. Identifying a cooperative control mechanism between an applied...

    Office of Scientific and Technical Information (OSTI)

    Identifying a cooperative control mechanism between an applied field and the environment ... Title: Identifying a cooperative control mechanism between an applied field and the ...

  6. Building America Webinar: Opportunities to Apply Phase Change...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Apply Phase Change Materials to Building Enclosures Building America Webinar: Opportunities to Apply Phase Change Materials to Building Enclosures This webinar, presented by ...

  7. Large Eddy Simulation (LES) Applied to Advanced Engine Combustion...

    Broader source: Energy.gov (indexed) [DOE]

    Large Eddy Simulation (LES) Applied to Advanced Engine Combustion Research Large Eddy Simulation (LES) Applied to Low-Temperature and Diesel Engine Combustion Research Vehicle ...

  8. Applying physics, teamwork to fusion energy science | Princeton Plasma

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Lab Applying physics, teamwork to fusion energy science American Fusion News Category: Massachusetts Institute of Technology (MIT) Link: Applying physics, teamwork to fusion energy science

  9. Statistical and Domain Analytics Applied to PV Module Lifetime...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science ...

  10. James Webb Space Telescope: PM Lessons Applied - Eric Smith,...

    Energy Savers [EERE]

    James Webb Space Telescope: PM Lessons Applied - Eric Smith, Deputy Program Director, NASA James Webb Space Telescope: PM Lessons Applied - Eric Smith, Deputy Program Director,...

  11. ADR LUNCHTIME PROGRAM: "Crisis Negotiation: Apply the Skills...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apply the Skills Used By Law Enforcement In Resolving Conflict Situations" ADR LUNCHTIME PROGRAM: "Crisis Negotiation: Apply the Skills Used By Law Enforcement In Resolving ...

  12. Artificial intelligence technologies applied to terrain analysis

    SciTech Connect (OSTI)

    Wright, J.C. ); Powell, D.R. )

    1990-01-01

    The US Army Training and Doctrine Command is currently developing, in cooperation with Los Alamos National Laboratory, a Corps level combat simulation to support military analytical studies. This model emphasizes high resolution modeling of the command and control processes, with particular attention to architectural considerations that enable extension of the model. A planned future extension is the inclusion of an computer based planning capability for command echelons that can be dynamical invoked during the execution of then model. Command and control is the process through which the activities of military forces are directed, coordinated, and controlled to achieve the stated mission. To perform command and control the commander must understand the mission, perform terrain analysis, understand his own situation and capabilities as well as the enemy situation and his probable actions. To support computer based planning, data structures must be available to support the computer's ability to understand'' the mission, terrain, own capabilities, and enemy situation. The availability of digitized terrain makes it feasible to apply artificial intelligence technologies to emulate the terrain analysis process, producing data structures for uses in planning. The work derived thus for to support the understanding of terrain is the topic of this paper. 13 refs., 5 figs., 6 tabs.

  13. Image processing applied to laser cladding process

    SciTech Connect (OSTI)

    Meriaudeau, F.; Truchetet, F.

    1996-12-31

    The laser cladding process, which consists of adding a melt powder to a substrate in order to improve or change the behavior of the material against corrosion, fatigue and so on, involves a lot of parameters. In order to perform good tracks some parameters need to be controlled during the process. The authors present here a low cost performance system using two CCD matrix cameras. One camera provides surface temperature measurements while the other gives information relative to the powder distribution or geometric characteristics of the tracks. The surface temperature (thanks to Beer Lambert`s law) enables one to detect variations in the mass feed rate. Using such a system the authors are able to detect fluctuation of 2 to 3g/min in the mass flow rate. The other camera gives them information related to the powder distribution, a simple algorithm applied to the data acquired from the CCD matrix camera allows them to see very weak fluctuations within both gaz flux (carriage or protection gaz). During the process, this camera is also used to perform geometric measurements. The height and the width of the track are obtained in real time and enable the operator to find information related to the process parameters such as the speed processing, the mass flow rate. The authors display the result provided by their system in order to enhance the efficiency of the laser cladding process. The conclusion is dedicated to a summary of the presented works and the expectations for the future.

  14. Hanford Waste Vitrification Plant applied technology plan

    SciTech Connect (OSTI)

    Kruger, O.L.

    1990-09-01

    This Applied Technology Plan describes the process development, verification testing, equipment adaptation, and waste form qualification technical issues and plans for resolution to support the design, permitting, and operation of the Hanford Waste Vitrification Plant. The scope of this Plan includes work to be performed by the research and development contractor, Pacific Northwest Laboratory, other organizations within Westinghouse Hanford Company, universities and companies with glass technology expertise, and other US Department of Energy sites. All work described in this Plan is funded by the Hanford Waste Vitrification Plant Project and the relationship of this Plan to other waste management documents and issues is provided for background information. Work to performed under this Plan is divided into major areas that establish a reference process, develop an acceptable glass composition envelope, and demonstrate feed processing and glass production for the range of Hanford Waste Vitrification Plant feeds. Included in this work is the evaluation and verification testing of equipment and technology obtained from the Defense Waste Processing Facility, the West Valley Demonstration Project, foreign countries, and the Hanford Site. Development and verification of product and process models and other data needed for waste form qualification documentation are also included in this Plan. 21 refs., 4 figs., 33 tabs.

  15. Patterns and perspectives in applied fracture mechanics

    SciTech Connect (OSTI)

    Merkle, J.G.

    1994-12-31

    This lecture begins with a overview of applied fracture mechanics pertinent to safety of pressure vessels. It then progresses to a chronological panorama of experimental and analytical results. To be useful and dependable in safety analysis of real structures, new analysis developments must be physically realistic, which means that they must accurately describe physical cause and effect. Consequently, before mathematical modeling can begin, cause and effect must be established from experimental data. This can be difficult and time consuming, but worth the effort. Accordingly, the theme of this paper is that the search for patterns is constant and vital. This theme is illustrated by the development of small, single-specimen, fracture toughness testing techniques. It is also illustrated by the development, based on two different published large-strain, elastic-plastic, three-dimensional finite-element analyses, of a hypothesis concerning three-dimensional loss of constraint. When a generalization of Irwin`s thickness-normalized plastic-zone parameter, reaches a value close to 2{pi}, the through-thickness contraction strain at the apex of the near-tip logarithmic-spiral slip-line region becomes the dominant negative strain accommodating crack opening. Because slip lines passing from the midplane to the stress-free side surfaces do not have to curve, once these slip lines are established, stresses near the crack tip are only elevated by strain hardening and constraint becomes significantly relaxed. This hypothesis, based on published three-dimensional elastic-plastic analyses, provides a potentially valuable means for gaining additional insight into constraint effects on fracture toughness by considering the roles played by the plastic strains as well as the stresses that develop near a crack tip.

  16. DOE - Office of Legacy Management -- Case School of Applied Science...

    Office of Legacy Management (LM)

    Case School of Applied Science Ohio State University - OH 0-01 Site ID (CSD Index Number): OH.0-01 Site Name: Case School of Applied Science, Ohio State University Site Summary: Site ...

  17. Kerry Vahala: Jenkins Professor and Professor of Applied Physics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied Physics, California Institute of Technology Nov 6, 2013 | 4:00 PM - 5:00 PM Kerry Vahala Jenkins Professor and Professor of Applied Physics, California Institute of ...

  18. Oregon Learning About and Applying for Water Rights Webpage ...

    Open Energy Info (EERE)

    Learning About and Applying for Water Rights Webpage Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Oregon Learning About and Applying for Water...

  19. Attenuation-Based Remedies in the Subsurface Applied Field Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initiative (ABRS AFRI) | Department of Energy Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) Located at the Savannah River Site in Aiken, South Carolina, the Attenuation-Based Remedies in the Subsurface Applied Field Research Initiative (ABRS AFRI) was established to

  20. Vehicle Technologies Office: Applied Battery Research | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Applied Battery Research Vehicle Technologies Office: Applied Battery Research Applied battery research addresses the barriers facing the lithium-ion systems that are closest to meeting the technical energy and power requirements for hybrid electric vehicle (HEV) and electric vehicle (EV) applications. In addition, applied battery research concentrates on technology transfer to ensure that the research results and lessons learned are effectively provided to U.S. automotive and battery

  1. Register to Apply for EERE Funding Opportunities | Department of Energy

    Office of Environmental Management (EM)

    Apply for Funding » Register to Apply for EERE Funding Opportunities Register to Apply for EERE Funding Opportunities Before applying to an EERE financial opportunity, potential applicants must complete specific registration requirements. Of the registrations listed below, the EERE Exchange registration does not have a delay; however, the remaining registration requirements could take several weeks to process and are necessary before a potential applicant can receive an award. To be eligible to

  2. Aachen University of Applied Sciences | Open Energy Information

    Open Energy Info (EERE)

    Aachen University of Applied Sciences Place: Germany Sector: Services Product: General Financial & Legal Services ( Academic Research foundation ) References: Aachen...

  3. Applied Process Engineering Laborotory APEL | Open Energy Information

    Open Energy Info (EERE)

    Engineering Laborotory (APEL) Place: United States Sector: Services Product: General Financial & Legal Services ( Private family-controlled ) References: Applied Process...

  4. PLURAL METALLIC COATINGS ON URANIUM AND METHOD OF APPLYING SAME

    DOE Patents [OSTI]

    Gray, A.G.

    1958-09-16

    A method is described of applying protective coatings to uranlum articles. It consists in applying chromium plating to such uranium articles by electrolysis in a chromic acid bath and subsequently applying, to this minum containing alloy. This aluminum contalning alloy (for example one of aluminum and silicon) may then be used as a bonding alloy between the chromized surface and an aluminum can.

  5. Applied Mathematics | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applied Mathematics Advanced Scientific Computing Research (ASCR) ASCR Home About Research Applied Mathematics Applied Mathematics Conferences And Workshops Computer Science Next Generation Networking Scientific Discovery through Advanced Computing (SciDAC) ASCR SBIR-STTR Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) Community Resources Contact Information Advanced Scientific Computing Research U.S. Department of

  6. CX-009418: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Electron Beam Melting CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office

  7. CX-009419: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Magnetic Pulser CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office

  8. CX-009420: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Additive Manufacturing Using EOSINT M280 CX(s) Applied: None applied. Date: 10/30/2012 Location(s): Missouri Offices(s): Kansas City Site Office

  9. Opportunities to Apply Phase Change Materials to Building Enclosures

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webinar | Department of Energy Opportunities to Apply Phase Change Materials to Building Enclosures Webinar Opportunities to Apply Phase Change Materials to Building Enclosures Webinar Slides from the Building America webinar on November 11, 2011. webinar_pcm_enclosures_20111111.pdf (2.99 MB) More Documents & Publications Building America Webinar: Opportunities to Apply Phase Change Materials to Building Enclosures Vehicle Technologies Office Merit Review 2016: ePATHS - electrical PCM

  10. 2008 Annual Merit Review Results Summary - 2. Applied Battery Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-1 2. Applied Battery Research Introduction Applied battery research focuses on addressing the cross-cutting barriers facing the lithium-ion systems that are closest to meeting all of the technical energy and power requirements for hybrid electric vehicle (HEV) and electric vehicle (EV) applications. In addition, the applied battery research activity concentrates on technology transfer to ensure that the research results and lessons learned are effectively provided to U.S. automotive and

  11. Apply for the Parallel Computing Summer Research Internship

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How to Apply Apply for the Parallel Computing Summer Research Internship Creating next-generation leaders in HPC research and applications development Program Co-Lead Robert (Bob) Robey Email Program Co-Lead Gabriel Rockefeller Email Program Co-Lead Hai Ah Nam Email Professional Staff Assistant Nicole Aguilar Garcia (505) 665-3048 Email Current application deadline is February 5, 2016 with notification by early March 2016. Who can apply? Upper division undergraduate students and early graduate

  12. Where to Apply for Weatherization Assistance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    You are here Home » Weatherization Assistance Program » Where to Apply for Weatherization Assistance Where to Apply for Weatherization Assistance To apply for weatherization assistance you need to contact your state weatherization agency. The U.S. Department of Energy (DOE) does not provide weatherization services or services of any kind to individuals. DOE also does not process applications-this process is handled by each state. How to Determine if You Are Eligible for Weatherization

  13. Building America Webinar: Opportunities to Apply Phase Change Materials to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Enclosures | Department of Energy to Apply Phase Change Materials to Building Enclosures Building America Webinar: Opportunities to Apply Phase Change Materials to Building Enclosures This webinar, presented by research team Fraunhofer Center for Sustainable Energy Systems (CSE), reviewed basic physical characteristics and thermal properties of phase change materials (PCMs) and provided guidance on how to effectively apply PCMs in buildings in the United States.

  14. Apply: Funding Opportunity - Advancing Solutions to Improve Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advancing Solutions to Improve Energy Efficiency of Commercial Buildings Apply: Funding Opportunity - Advancing Solutions to Improve Energy Efficiency of Commercial Buildings ...

  15. ENERGY STAR Webinar: How to Apply for the ENERGY STAR

    Broader source: Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) is hosting a webinar on how to apply for ENERGY STAR certification in Portfolio Manager.

  16. Identification of multi-modal plasma responses to applied magnetic...

    Office of Scientific and Technical Information (OSTI)

    Title: Identification of multi-modal plasma responses to applied magnetic ... Type: Publisher's Accepted Manuscript Journal Name: Physics of Plasmas Additional Journal ...

  17. Apply: Building Energy Efficiency Frontiers and Incubator Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Energy Efficiency Frontiers and Incubator Technologies (BENEFIT) - 2014 (DE-FOA-0001027) Apply: Building Energy Efficiency Frontiers and Incubator Technologies (BENEFIT) - ...

  18. Attenuation-Based Remedies in the Subsurface Applied Field Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The mission of the Attenuation Based Remedies in the Subsurface Applied Field Research Initiative is to seek holistic solutions to DOE's groundwater contamination problems that ...

  19. The generalized finite element method applied to the dynamic...

    Office of Scientific and Technical Information (OSTI)

    Title: The generalized finite element method applied to the dynamic response of heterogeneous media. Authors: Robbins, Joshua ; Voth, Thomas E. Publication Date: 2013-02-01 OSTI ...

  20. BLM Manual 2804: Applying for FLPMA Grants | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: BLM Manual 2804: Applying for FLPMA GrantsPermittingRegulatory...

  1. Apply: Small Business Funding Opportunity for Lighting, Integrated...

    Office of Environmental Management (EM)

    Small Business Funding Opportunity for Lighting, Integrated Storage, and Distributed Generation Apply: Small Business Funding Opportunity for Lighting, Integrated Storage, and ...

  2. Crivelli, Silvia; Meza, Juan 60 APPLIED LIFE SCIENCES Ernest...

    Office of Scientific and Technical Information (OSTI)

    folding via divide-and-conquer optimization Oliva, Ricardo; Crivelli, Silvia; Meza, Juan 60 APPLIED LIFE SCIENCES Ernest Orlando Lawrence Berkeley NationalLaboratory, Berkeley, CA...

  3. Modular Applied General Equilibrium Tool (MAGNET) | Open Energy...

    Open Energy Info (EERE)

    Related Tools CRiSTAL Forests MCA4Climate - Guidance for scientifically sound climate change planning Environmental Impact and Sustainability Applied General Equilibrium Model...

  4. Applied Solar LLC formerly Open Energy Corp and Barnabus Energy...

    Open Energy Info (EERE)

    Open Energy Corp and Barnabus Energy Inc Jump to: navigation, search Name: Applied Solar LLC (formerly Open Energy Corp and Barnabus Energy Inc) Place: San Diego, California...

  5. Building America Whole-House Solutions for Existing Homes: Applying...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Whole-House Solutions for Existing Homes: Applying Best Practices to Florida Local Government Retrofit Programs - Central Florida (Fact Sheet) Building America ...

  6. Overview of Applied Battery Research | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    4_henriksen.pdf (802.95 KB) More Documents & Publications Overview of Applied Battery Research Electrochemistry Diagnostics at LBNL ELECTROCHEMISTRY DIAGNOSTICS AT LBNL

  7. Applied Studies and Technology (AS&T) | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Applied Studies and Technology (AS&T) DOE established the Environmental Sciences Laboratory (ESL) in Grand Junction, Colorado, in 1991 to support its programs. ESL scientists ...

  8. Applied Materials Switzerland SA Formerly HCT Shaping Systems...

    Open Energy Info (EERE)

    Switzerland SA Formerly HCT Shaping Systems SA Jump to: navigation, search Name: Applied Materials Switzerland SA (Formerly HCT Shaping Systems SA) Place: Chezeaux, Switzerland...

  9. D&D Toolbox Project - Technology Demonstration of Fixatives Applied...

    Broader source: Energy.gov (indexed) [DOE]

    D&D Toolbox Project - Technology Demonstration of Fixatives Applied to Hot Cell Facilities via Remote Sprayer Platforms (215.59 KB) More Documents & Publications Demonstration of ...

  10. Expert Meeting Report: Recommendations for Applying Water Heaters...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recommendations for Applying Water Heaters in Combination Space and Domestic Water Heating Systems A. Rudd, K. Ueno, D. Bergey, R. Osser Building Science Corporation June 2012 i ...

  11. Building America Whole-House Solutions for Existing Homes: Applying...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Homes: Applying Best Practices to Florida Local Government Retrofit Programs - Central Florida (Fact Sheet) Building America Whole-House Solutions for Existing Homes: ...

  12. Solar Applied Materials Technology Corp | Open Energy Information

    Open Energy Info (EERE)

    Name: Solar Applied Materials Technology Corp Place: Tainan, Taiwan Product: Taiwan's material process specialists with over 20 years experience and in the areas of sputtering...

  13. Energy Department Announces Up to $14 Million for Applying Landscape...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applying landscape design to bioenergy production systems is a promising approach for meeting multiple environmental, social, and economic objectives, such as maintaining or ...

  14. Webinar "Applying High Performance Computing to Engine Design...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Webinar "Applying High Performance Computing to Engine Design Using Supercomputers" Share ... Study Benefits of Bioenergy Crop Integration Video: Biofuel technology at Argonne

  15. D&D Toolbox Project - Technology Demonstration of Fixatives Applied...

    Office of Environmental Management (EM)

    D&D activities, performed by Florida International University's Applied Research Center ... and selected for integration with a commercially available remotely operated platform. ...

  16. Am Shav Technological Applied Development Center | Open Energy...

    Open Energy Info (EERE)

    Technological Applied Development Center Place: Israel Sector: Services Product: General Financial & Legal Services ( Private family-controlled ) References: Am-Shav...

  17. Composition for applying antireflective coating on solar cell

    SciTech Connect (OSTI)

    Whitehouse, D.L.

    1983-10-25

    A method is disclosed, and the composition, for the application of an antireflective coating on solar cells and the subsequent application of metal contacts comprising applying a screen to the surface of a solar cell, applying a paste comprising a metal alkoxide over the screen, heat treating the cell and metal alkoxide paste, and nickel plating the resultant cell.

  18. Method for applying antireflective coating on solar cell

    SciTech Connect (OSTI)

    Whitehouse, D.L.

    1982-05-04

    A method for the application and the composition of an antireflective coating on solar cells and the subsequent application of metal contacts comprises applying a screen to the surface of a solar cell, applying a paste comprising a metal alkoxide over the screen, heat treating the cell and metal alkoxide paste, and nickel plating the resultant cell.

  19. Computational Advances in Applied Energy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Computational Advances in Applied Energy Computational Advances in Applied Energy Friedmann-LLNL-SEAB.10.11.pdf (19.92 MB) More Documents & Publications Director's Perspective by George Miller Fact Sheet: Collaboration of Oak Ridge, Argonne, and Livermore (CORAL) QER - Comment of Canadian Hydropower Association

  20. ENERGY STAR Webinar: How to Apply for the ENERGY STAR

    Broader source: Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) is hosting a webinar on how to apply for ENERGY STAR certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see the step-by-step process of applying, and gain tips to help your property get from application to award.

  1. Applied research in the solar thermal-energy-systems program

    SciTech Connect (OSTI)

    Brown, C. T.; Lefferdo, J. M.

    1981-03-01

    Within the Solar Thermal Research and Advanced Development (RAD) program a coordinated effort in materials research, fuels and chemical research and applied research is being carried out to meet the systems' needs. Each of these three program elements are described with particular attention given to the applied research activity.

  2. Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) - Overview

    SciTech Connect (OSTI)

    2011-02-01

    The Deep Vadoze Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources and to address the challenge of preventing contamination in the deep vadose zone from reaching groundwater. This factsheet provides an overview of the initiative and the approach to integrate basic science and needs-driven applied research activities with cleanup operations.

  3. ENERGY STAR Webinar: How to Apply for ENERGY STAR

    Broader source: Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) ENERGY STAR is hosting a webinar on how to apply for ENERGY STAR Certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see the step-by-step process of applying, and gain tips to help your property get from application to award.

  4. Webinar: Understanding and Applying TM-30-15

    Broader source: Energy.gov [DOE]

    The IES recently approved TM-30-15, a new method for evaluating light source color rendition. This webinar, “Understanding and Applying TM-30-15, the IES Method for Evaluating Light Source Color...

  5. Mission Driven and Applied Science | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integrating for Materials Technology, Engineering, Education, and Research (i-MatTER) i-MatTER matches our centers with applied activities in WDTS, EERE, FE, ARPA-E, technology ...

  6. How to Apply for Weatherization Assistance | Department of Energy

    Energy Savers [EERE]

    The funds announced earlier this month allow for people who make up to 200% of the federal poverty level to apply for weatherization-which is about 44,000 for a family of four in ...

  7. ENERGY STAR Webinar: How to Apply for the ENERGY STAR

    Broader source: Energy.gov [DOE]

    The U.S. Environmental Protection Agency (EPA) is hosting a webinar on how to apply for ENERGY STAR certification in Portfolio Manager. Understand the value of the ENERGY STAR certification, see...

  8. Apply: Increase Residential Energy Code Compliance Rates (DE...

    Office of Environmental Management (EM)

    Increase Residential Energy Code Compliance Rates (DE-FOA-0000953) Apply: Increase Residential Energy Code Compliance Rates (DE-FOA-0000953) April 21, 2014 - 12:32pm Addthis This ...

  9. Sandian Named Fellow of the Society for Industrial and Applied...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Kolda and the other members of the 2015 class of SIAM fellows will be honored in August at the International Congress on Industrial and Applied Mathematics in Beijing. Read the ...

  10. Deep Vadose Zone Applied Field Research Initiative (DVZ-AFRI)

    Broader source: Energy.gov [DOE]

    Located on the Hanford Site in Richland, Washington, the Deep Vadose Zone Applied Field Research Initiative (DVZ AFRI) was established to protect water resources by addressing the challenge of...

  11. Rational Catalyst Design Applied to Development of Advanced Oxidation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Catalysts for Diesel Emission Control | Department of Energy Rational Catalyst Design Applied to Development of Advanced Oxidation Catalysts for Diesel Emission Control Rational Catalyst Design Applied to Development of Advanced Oxidation Catalysts for Diesel Emission Control Presentation given at the 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan. Sponsored by the U.S. Department of Energy's (DOE) Office of FreedomCAR and

  12. Applying for EERE Funding Opportunities | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    You are here Home » Applying for EERE Funding Opportunities Applying for EERE Funding Opportunities EERE uses Funding Opportunity Announcements (FOAs) to solicit applications in specific program areas and selects projects based on a merit review process that includes industry and technology experts. What to Expect During the Application Process Illustration showing the funding and approval process. The application process may include multiple phases: letter of intent, concept paper, full

  13. Behavioral Economics Applied to Energy Demand Analysis: A Foundation

    U.S. Energy Information Administration (EIA) Indexed Site

    Behavioral Economics Applied to Energy Demand Analysis: A Foundation October 2014 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Behavioral Economics Applied to Energy Demand Analysis i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of

  14. Bridging the Gap between Fundamental Physics and Chemistry and Applied

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Models for HCCI Engines | Department of Energy Bridging the Gap between Fundamental Physics and Chemistry and Applied Models for HCCI Engines Bridging the Gap between Fundamental Physics and Chemistry and Applied Models for HCCI Engines 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters 2005_deer_assanis.pdf (1.42 MB) More Documents & Publications Computationally Efficient Modeling of High-Efficiency Clean Combustion Engines Modeling of HCCI and PCCI

  15. Optical Diagnostics and Modeling Tools Applied to Diesel HCCI | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Optical Diagnostics and Modeling Tools Applied to Diesel HCCI Optical Diagnostics and Modeling Tools Applied to Diesel HCCI 2002 DEER Conference Presentation: Caterpillar Engine Research 2002_deer_choi.pdf (954.08 KB) More Documents & Publications Computational Fluid Dynamics Modeling of Diesel Engine Combustion and Emissions Development of Enabling Technologies for High Efficiency, Low Emissions Homogeneous Charge Compression Ignition (HCCI) Engines 3-D Combustion Simulation

  16. 2008 Annual Merit Review Results Summary - 2. Applied Battery Research |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2. Applied Battery Research 2008 Annual Merit Review Results Summary - 2. Applied Battery Research DOE Vehicle Technologies Annual Merit Review 2008_merit_review_2.pdf (1.85 MB) More Documents & Publications 2008 Annual Merit Review Results Summary - 3. Battery Development, Testing, Simulation, Analysis 2008 Annual Merit Review Results Summary - 4. Exploratory Battery Research 2011 Annual Merit Review Results Report - Energy Storage Technologies

  17. Statistical and Domain Analytics Applied to PV Module Lifetime and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Degradation Science | Department of Energy Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science Presented at the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado pvmrw13_ps2_casewestern_bruckman.pdf (6.77 MB) More Documents & Publications Literature Review of the Effects of UV Exposure on PV Modules Failure Rates from Certification Testing to UL

  18. Applying Risk Communication to the Transportation of Radioactive Materials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Applying Risk Communication to the Transportation of Radioactive Materials Applying Risk Communication to the Transportation of Radioactive Materials Participants should expect to gain the following skills: How to recognize how the stakeholders prefer to receive information How to integrate risk communication principles into individual communication How to recognize the importance of earning trust and credibility How to identify stakeholders How to answer questions

  19. Applying an Experimental Design Loop to Shape Memory Alloys (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Conference: Applying an Experimental Design Loop to Shape Memory Alloys Citation Details In-Document Search Title: Applying an Experimental Design Loop to Shape Memory Alloys Authors: Hogden, John Edward [1] + Show Author Affiliations Los Alamos National Laboratory Publication Date: 2016-06-01 OSTI Identifier: 1257099 Report Number(s): LA-UR-16-23811 DOE Contract Number: AC52-06NA25396 Resource Type: Conference Resource Relation: Conference: Data Science and Optimal Learning

  20. CONTRACTOR LEGAL MANAGEMENT REQUIREMENTS: APPLYING THE FINAL RULE TO

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EXISTING CONTRACTS | Department of Energy CONTRACTOR LEGAL MANAGEMENT REQUIREMENTS: APPLYING THE FINAL RULE TO EXISTING CONTRACTS CONTRACTOR LEGAL MANAGEMENT REQUIREMENTS: APPLYING THE FINAL RULE TO EXISTING CONTRACTS The Department issued a Final Rule revising the regulations covering contractor legal management requirements at 10 C.F.R. 719 (Federal Register May 3, 2013; http://www.gpo.gov/fdsys/pkg/FR-2013-05-03/pdf/2013-10485.pdf). It requires Contracting Officers to attempt to execute

  1. Conference Proceedings Available - The Smart Grid Experience: Applying

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Results, Reaching Beyond | Department of Energy Conference Proceedings Available - The Smart Grid Experience: Applying Results, Reaching Beyond Conference Proceedings Available - The Smart Grid Experience: Applying Results, Reaching Beyond March 23, 2015 - 10:55am Addthis In October 2014, the Electric Power Research Institute (EPRI) and the U.S. Department of Energy's (DOE's) Office of Electricity Delivery and Energy Reliability (OE) held a conference to assess progress, impacts, benefits,

  2. Penetrameter positioner for bore-side radiography of tubes

    DOE Patents [OSTI]

    Davis, E.V.; Foster, B.E.

    1980-02-05

    A positioner is provided for placing plaque or wire penetrameters, as used in radiographic inspection, in close proximity with the inner wall of tubing at any desired location along the tubing. The positioner head carrying the penetrameter is inflatable whereby it is positioned in tte deflated condition, inflated to place the penetrameter against a weld to be inspected in the tubing wall, and then deflated during removal. If desired, the penetrameter holder may be used to center the radiographic source on the axis of the tube.

  3. Dynamic model predicts well bore surge and swab pressures

    SciTech Connect (OSTI)

    Bing, Z.; Kaiji, Z.

    1996-12-30

    A dynamic well control model predicts surge and swab pressures more accurately than a steady-state model, thereby providing better estimates of pressure fluctuations when pipe is tripped. Pressure fluctuations from tripping pipe into a well can contribute to lost circulation, kicks,and well control problems. This dynamic method of predicting surge and swab pressures was verified in a full-scale test well in the Zhong Yuan oil field in China. Both the dynamic model and steady state model were verified through the test data. The test data showed the dynamic model can correctly predict downhole pressures from running or pulling pipe in a well; steady state models may result in relatively large prediction errors, especially in deeper wells.

  4. Repetitive, small-bore two-stage light gas gun

    SciTech Connect (OSTI)

    Combs, S.K.; Foust, C.R.; Fehling, D.T.; Gouge, M.J.; Milora, S.L.

    1991-01-01

    A repetitive two-stage light gas gun for high-speed pellet injection has been developed at Oak Ridge National Laboratory. In general, applications of the two-stage light gas gun have been limited to only single shots, with a finite time (at least minutes) needed for recovery and preparation for the next shot. The new device overcomes problems associated with repetitive operation, including rapidly evacuating the propellant gases, reloading the gun breech with a new projectile, returning the piston to its initial position, and refilling the first- and second-stage gas volumes to the appropriate pressure levels. In addition, some components are subjected to and must survive severe operating conditions, which include rapid cycling to high pressures and temperatures (up to thousands of bars and thousands of kelvins) and significant mechanical shocks. Small plastic projectiles (4-mm nominal size) and helium gas have been used in the prototype device, which was equipped with a 1-m-long pump tube and a 1-m-long gun barrel, to demonstrate repetitive operation (up to 1 Hz) at relatively high pellet velocities (up to 3000 m/s). The equipment is described, and experimental results are presented. 124 refs., 6 figs., 5 tabs.

  5. Penetrameter positioner for bore-side radiography of tubes

    DOE Patents [OSTI]

    Davis, Earl V. (Oak Ridge, TN); Foster, Billy E. (Oak Ridge, TN)

    1983-01-01

    A positioner is provided for placing plaque or wire penetrameters, as used in radiographic inspection, in close proximity with the inner wall of tubing at any desired location along the tubing. The positioner head carrying the penetrameter is inflatable whereby it is positioned in the deflated condition, inflated to place the penetrameter against a weld to be inspected in the tubing wall, and then deflated during removal. If desired, the penetrameter holder may be used to center the radiographic source on the axis of the tube.

  6. CX-010375: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Replace Existing Firehouse CX(s) Applied: B1.15 Date: 09/20/2011 Location(s): California Offices(s): Berkeley Site Office

  7. FE Categorical Exclusions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8, 2011 CX-006459: Categorical Exclusion Determination Analytical Physics - Transmission Electron Microscopy (TEM) CX(s) Applied: B3.6 Date: 08082011 Location(s): Albany, Oregon...

  8. CX-012231: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Mica Peak Radio Station upgrade CX(s) Applied: B1.19 Date: 06/09/2014 Location(s): Washington Offices(s): Bonneville Power Administration

  9. CX-009515: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Tide Creek Property Funding CX(s) Applied: B1.25 Date: 11/08/2012 Location(s): Oregon Offices(s): Bonneville Power Administration

  10. CX-011215: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Nepese Marsh Upgrades CX(s) Applied: B2.5 Date: 10/17/2013 Location(s): Illinois Offices(s): Fermi Site Office

  11. CX-012606: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Preparing of Environmental Samples for Analysis CX(s) Applied: B3.6Date: 41810 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  12. CX-012581: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Demolition of Outfall Sampling Station CX(s) Applied: B1.23Date: 41844 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  13. CX-012572: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    H-Area Vehicle Barrier Installation CX(s) Applied: B1.15Date: 41862 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  14. CX-012566: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Z-Area Fire Tank Painting CX(s) Applied: B1.3Date: 41865 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  15. CX-012628: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Deactivation and Decommissioning of 711-L CX(s) Applied: B1.23Date: 41793 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  16. CX-012559: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Seal Access Plugs at 105-C CX(s) Applied: B1.3Date: 41872 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  17. CX-012587: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    HB-Line Security Upgrades CX(s) Applied: B1.3Date: 41835 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  18. CX-011194: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Particle Physics Division Outback Garage CX(s) Applied: B1.15 Date: 09/19/2013 Location(s): Illinois Offices(s): Fermi Site Office

  19. CX-010195: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Polymer Synthesis Lab - Modification CX(s) Applied: B3.6 Date: 04/15/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  20. CX-010241: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hydrogen Pathway Analyses CX(s) Applied: A9 Date: 02/28/2013 Location(s): Virginia Offices(s): Golden Field Office

  1. CX-012310: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sawmill Creek Stream Bank Erosion CX(s) Applied: B1.3 Date: 06/06/2014 Location(s): Illinois Offices(s): Argonne Site Office

  2. CX-012437: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    High Energy Density Lithium Battery CX(s) Applied: B3.6Date: 41878 Location(s): New YorkOffices(s): National Energy Technology Laboratory

  3. CX-012028: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    High Temperature Laboratory CX(s) Applied: B3.6 Date: 04/21/2014 Location(s): Oregon Offices(s): National Energy Technology Laboratory

  4. CX-011538: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ninemile Creek Lower Property Funding CX(s) Applied: B1.25 Date: 11/26/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  5. CX-011536: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Aeneans Creek Spring Property Funding CX(s) Applied: B1.25 Date: 11/25/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  6. CX-011537: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wanacut Creek Upper Property Funding CX(s) Applied: B1.25 Date: 11/26/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  7. CX-012793: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    15-Minute Transmission Scheduling CX(s) Applied: B4.4, B4.5Date: 41933 Location(s): WashingtonOffices(s): Bonneville Power Administration

  8. CX-012110: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Cowlitz Falls Fish Facility Access Agreement Extension CX(s) Applied: A2 Date: 04/02/2014 Location(s): Washington Offices(s): Bonneville Power Administration

  9. CX-009707: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Alcoa Power Sales Contract CX(s) Applied: B4.1 Date: 12/04/2012 Location(s): Oregon, Washington Offices(s): Bonneville Power Administration

  10. CX-009513: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Aquatic Invasive Mussels Monitoring CX(s) Applied: B3.1 Date: 10/15/2012 Location(s): CX: none Offices(s): Bonneville Power Administration

  11. CX-013632: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Alcoa Power Sales Contract Amendment CX(s) Applied: B4.11Date: 04/23/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  12. CX-008989: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    State Energy Program CX(s) Applied: A9, A11 Date: 08/27/2012 Location(s): Kansas Offices(s): Golden Field Office

  13. CX-008144: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Planned Repair of Flow Lines CX(s) Applied: B5.4 Date: 08/09/2011 Location(s): Wyoming Offices(s): RMOTC

  14. CX-011564: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Excess Facilities Deactivation and Demolition CX(s) Applied: B1.23 Date: 11/05/2013 Location(s): Idaho Offices(s): Idaho Operations Office

  15. CX-012705: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Materials and Fuels Complex (MFC)-703 Fire Alarm Replacement CX(s) Applied: B2.2Date: 41858 Location(s): IdahoOffices(s): Nuclear Energy

  16. CX-012725: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Materials and Fuel Complex (MFC)-782 Fire Sprinkler Installation CX(s) Applied: B2.2Date: 41829 Location(s): IdahoOffices(s): Nuclear Energy

  17. CX-013825: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Lab A19 Cleanroom Construction CX(s) Applied: B1.31Date: 06/29/2015 Location(s): IdahoOffices(s): Nuclear Energy

  18. CX-014183: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Heyburn Substation Door Replacement CX(s) Applied: B4.6Date: 09/03/2015 Location(s): IdahoOffices(s): Bonneville Power Administration

  19. CX-009398: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Domestic Source Recovery CX(s) Applied: B2.6 Date: 11/01/2012 Location(s): New Mexico Offices(s): Los Alamos Site Office

  20. CX-014379: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ouagga Mussel Study Funding CX(s) Applied: B3.16Date: 10/29/2015 Location(s): NevadaOffices(s): Bonneville Power Administration

  1. CX-012822: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Santiam-Toledo Structure 39/7 Replacement CX(s) Applied: B1.3Date: 41876 Location(s): OregonOffices(s): Bonneville Power Administration

  2. CX-012799: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Malin-Hilltop Wood Pole Replacements CX(s) Applied: B1.3Date: 41915 Location(s): CaliforniaOffices(s): Bonneville Power Administration

  3. CX-012805: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Brasada-Harney #1 Wood Pole Replacements CX(s) Applied: B1.3Date: 41908 Location(s): OregonOffices(s): Bonneville Power Administration

  4. CX-013386: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chemical Vapor Deposition CX(s) Applied: B3.6Date: 01/07/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  5. CX-008724: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Rexburg Bus Lot Lease Termination CX(s) Applied: B1.24 Date: 07/05/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  6. CX-012283: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    USC Autoclave CX(s) Applied: B3.6 Date: 06/14/2014 Location(s): Oregon Offices(s): National Energy Technology Laboratory

  7. CX-007853: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Arizona Rooftop Challenge (ARC) CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Arizona Offices(s): Golden Field Office

  8. CX-007864: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Broward County SOLAR Project CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Florida Offices(s): Golden Field Office

  9. CX-012640: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Lexington-Longview #1 Access Road Maintenance CX(s) Applied: B1.3Date: 41865 Location(s): WashingtonOffices(s): Bonneville Power Administration

  10. CX-011065: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Midwest Region Alternative Fuels Project CX(s) Applied: A1 Date: 08/29/2013 Location(s): Kansas Offices(s): National Energy Technology Laboratory

  11. CX-011788: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    I-75 Green Corridor Project CX(s) Applied: A1 Date: 02/10/2014 Location(s): Tennessee Offices(s): National Energy Technology Laboratory

  12. CX-007497: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Clean Energy Coalition - Michigan Green Fleets CX(s) Applied: A1 Date: 12/06/2011 Location(s): Michigan Offices(s): National Energy Technology Laboratory

  13. CX-010938: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Midwest Region Alternative Fuels Project CX(s) Applied: A1 Date: 09/17/2013 Location(s): Kansas, Kansas Offices(s): National Energy Technology Laboratory

  14. CX-011271: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Idaho Petroleum Reduction Leadership Project CX(s) Applied: A1 Date: 09/30/2013 Location(s): Idaho Offices(s): National Energy Technology Laboratory

  15. CX-010514: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Center for Nanoscale Energy CX(s) Applied: B3.6 Date: 06/24/2013 Location(s): North Dakota Offices(s): Golden Field Office

  16. CX-010756: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Solar Utility Network Deployment Acceleration CX(s) Applied: A9, A11 Date: 08/15/2013 Location(s): Virginia Offices(s): Golden Field Office

  17. CX-011102: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    American Solar Transformation Initiative CX(s) Applied: A11 Date: 08/09/2013 Location(s): California Offices(s): Golden Field Office

  18. CX-008543: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Colorado State Energy Plan 2012 CX(s) Applied: A9, A11 Date: 06/25/2012 Location(s): Colorado Offices(s): Golden Field Office

  19. CX-013794: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Horn Rapids Tap Disconnect Additions CX(s) Applied: B4.6Date: 06/17/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  20. CX-009786: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Beck Road Substation Meter Installation CX(s) Applied: B1.7 Date: 01/07/2013 Location(s): Idaho Offices(s): Bonneville Power Administration

  1. CX-010435: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    De Moss Substation Expansion CX(s) Applied: B4.6 Date: 06/03/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  2. CX-012645: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wenatchee District 2014 Transmission Line Maintenance - Multiple Lines CX(s) Applied: B1.3Date: 41862 Location(s): WashingtonOffices(s): Bonneville Power Administration

  3. CX-012817: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Bell Maintenance Headquarters Access Road Maintenance CX(s) Applied: B1.3Date: 41890 Location(s): WashingtonOffices(s): Bonneville Power Administration

  4. CX-010727: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Dayton Tap Line Retirement CX(s) Applied: B4.10 Date: 08/13/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  5. CX-011173: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Yaak Substation Transformer Replacement CX(s) Applied: B4.6 Date: 09/18/2013 Location(s): Montana Offices(s): Bonneville Power Administration

  6. CX-010770: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wildland Fire Chainsaw Training CX(s) Applied: B1.2 Date: 08/01/2013 Location(s): Idaho Offices(s): Nuclear Energy

  7. FE Categorical Exclusions | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FE Categorical Exclusions FE Categorical Exclusions RSS June 4, 2014 CX-011993: Categorical Exclusion Determination Cheniere Marketing, LLC CX(s) Applied: B5.7 Date: 06042014...

  8. CX-013721: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Solar Vacuum Furnace CX(s) Applied: B3.6Date: 04/28/2015 Location(s): OregonOffices(s): National Energy Technology Laboratory

  9. CX-009797: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Eni USA Gas Marketing, LLC CX(s) Applied: B5.7 Date: 02/06/2013 Location(s): Louisiana Offices(s): Fossil Energy

  10. CX-013534: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    ENI USA Gas Marketing, LLC CX(s) Applied: B5.7Date: 04/14/2015 Location(s): Multiple LocationsOffices(s): Fossil Energy

  11. CX-012495: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Building 6 Stack Replacement CX(s) Applied: B1.3Date: 41855 Location(s): West VirginiaOffices(s): National Energy Technology Laboratory

  12. CX-010338: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Eugene Substation Fiber Interconnection CX(s) Applied: B4.7 Date: 05/21/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  13. CX-006681: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    New Drilling Location in Section 29CX(s) Applied: B3.1Date: 12/23/2009Location(s): Casper, WyomingOffice(s): RMOTC

  14. CX-011634: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Closure Turf Installation CX(s) Applied: B6.1 Date: 08/27/2013 Location(s): Texas Offices(s): Pantex Site Office

  15. CX-008700: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Natapoc Property Funding CX(s) Applied: B1.25 Date: 06/12/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  16. CX-010398: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Power Line Configuration CX(s) Applied: B4.13 Date: 04/25/2013 Location(s): Idaho Offices(s): Idaho Operations Office

  17. CX-010091: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Power Line Configuration 2013-1 CX(s) Applied: B4.13 Date: 04/15/2012 Location(s): Idaho Offices(s): Nuclear Energy

  18. CX-011642: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Pantex Lake Land Utilization CX(s) Applied: B1.11 Date: 11/05/2013 Location(s): Texas Offices(s): Pantex Site Office

  19. CX-003703: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Determination Florida Hydrogen Initiative - Florida Institute of Technology (Interdisciplinary Hydrogen and Fuel Cell Technology Academic Program) CX(s) Applied: A9 Date: 09...

  20. CX-011239: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Security Upgrades at Multiple Substations CX(s) Applied: ? Date: 10/02/2013 Location(s): Oregon, Washington Offices(s): Bonneville Power Administration

  1. CX-010689: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Generic CX Determination for Financial Assistance Awards CX(s) Applied: Unknown Date: 07/17/2013 Location(s): Illinois Offices(s): Chicago Office

  2. CX-007866: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    SunShot Massachusetts CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Massachusetts Offices(s): Golden Field Office

  3. CX-010656: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Stormwater Drainage Repair CX(s) Applied: B1.3 Date: 06/18/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  4. CX-012311: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Accelerator Test Facility II CX(s) Applied: B3.10 Date: 05/28/2014 Location(s): New York Offices(s): Brookhaven Site Office

  5. CX-007400: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Offshore Wind Removing Market Barriers CX(s) Applied: A9 Date: 12/07/2011 Location(s): Massachusetts Offices(s): Golden Field Office

  6. CX-010248: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hawaii Renewable Energy Development Venture CX(s) Applied: B5.18 Date: 03/25/2013 Location(s): Hawaii Offices(s): Golden Field Office

  7. CX-009202: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Port Angeles Substation Equipment Additions CX(s) Applied: B4.6 Date: 09/14/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  8. CX-008179: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Building 09-056 Demolition CX(s) Applied: B1.23 Date: 04/24/2012 Location(s): Texas Offices(s): Pantex Site Office

  9. CX-010767: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    University Boulevard Water Meter Installation CX(s) Applied: B2.2 Date: 08/14/2013 Location(s): Idaho Offices(s): Nuclear Energy

  10. CX-008546: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    National Open-ocean Energy Laboratory CX(s) Applied: A9 Date: 06/20/2012 Location(s): Florida Offices(s): Golden Field Office

  11. CX-010587: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Mariah Wind CX(s) Applied: B1.7 Date: 07/03/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  12. CX-013629: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Oregon City Station Service Replacement CX(s) Applied: B1.3Date: 04/27/2015 Location(s): OregonOffices(s): Bonneville Power Administration

  13. CX-012655: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Acquisition of Access Road Easements CX(s) Applied: B1.24Date: 41849 Location(s): WashingtonOffices(s): Bonneville Power Administration

  14. CX-010589: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Nine Canyon Communication Tower Addition CX(s) Applied: B4.6 Date: 07/01/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  15. CX-013446: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Longview Substation Sanitary Sewer Upgrade CX(s) Applied: B4.9Date: 03/25/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  16. CX-010869: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Nauticas Research Program CX(s) Applied: B3.6 Date: 08/07/2013 Location(s): Illinois Offices(s): Argonne Site Office

  17. CX-007957: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Geothermal Incentive Program CX(s) Applied: B5.1 Date: 01/30/2012 Location(s): Connecticut Offices(s): National Energy Technology Laboratory

  18. CX-007880: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Evergreen State Solar Partnership CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Washington Offices(s): Golden Field Office

  19. CX-007858: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Southwest Solar Transformation Initiative CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): California Offices(s): Golden Field Office

  20. CX-007859: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Developing Solar Friendly Communities CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Colorado Offices(s): Golden Field Office

  1. CX-007399: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Offshore Wind Removing Market Barriers CX(s) Applied: A9, A11 Date: 12/20/2011 Location(s): Massachusetts Offices(s): Golden Field Office

  2. CX-007779: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Routine Maintenance CX(s) Applied: B1.3 Date: 01/13/2012 Location(s): Washington Offices(s): River Protection-Richland Operations Office

  3. CX-010734: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Covington District Culvert Replacements CX(s) Applied: B1.3 Date: 07/22/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  4. CX-014180: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Bonanza Communication Facility Expansion CX(s) Applied: B1.19Date: 09/10/2015 Location(s): IdahoOffices(s): Bonneville Power Administration

  5. CX-014386: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Dworshak Passive Repeater project CX(s) Applied: B1.19Date: 10/13/2015 Location(s): IdahoOffices(s): Bonneville Power Administration

  6. CX-014382: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Communication Equipment Removals (#WC Projects) CX(s) Applied: B1.19Date: 10/21/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  7. CX-014368: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Haystack Butte Radio Communication Site CX(s) Applied: B1.19Date: 12/07/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  8. CX-013430: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Diffusion Couple Test CX(s) Applied: B3.6Date: 02/10/2015 Location(s): IdahoOffices(s): Idaho Operations Office

  9. CX-008161: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Prosser Hatchery Backup Generator Replacement CX(s) Applied: B1.31 Date: 04/16/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  10. CX-013972: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Slatt Substation Restroom Installation CX(s) Applied: B4.6Date: 08/12/2015 Location(s): OregonOffices(s): Bonneville Power Administration

  11. CX-013423: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Kalispell Maintenance Headquarters Upgrades CX(s) Applied: B1.3Date: 01/28/2015 Location(s): MontanaOffices(s): Bonneville Power Administration

  12. CX-013450: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ellensburg Guy Wire Installation CX(s) Applied: B4.9Date: 03/06/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  13. CX-012812: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chemawa-Salem #1 & #2 Access Road Maintenance CX(s) Applied: B1.3Date: 41893 Location(s): OregonOffices(s): Bonneville Power Administration

  14. CX-007939: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Midwest Region Alternative Fuels Project CX(s) Applied: A1 Date: 02/16/2012 Location(s): Missouri Offices(s): National Energy Technology Laboratory

  15. CX-009005: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Henderson Solar Energy Project CX(s) Applied: B5.16 Date: 08/22/2012 Location(s): Nevada Offices(s): Golden Field Office

  16. CX-013605: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Electrochemistry Corrosion Testing CX(s) Applied: B3.6Date: 03/05/2015Location(s): South CarolinaOffices(s): Savannah River Operations Office

  17. CX-012658: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chief Joseph and Custer Substations Security Fence Replacement CX(s) Applied: B1.11Date: 41843 Location(s): WashingtonOffices(s): Bonneville Power Administration

  18. CX-008535: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    King County Biogas and Nutrient Reduction CX(s) Applied: A9 Date: 05/22/2012 Location(s): Washington Offices(s): Golden Field Office

  19. CX-010532: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Various Demolition Jobs CX(s) Applied: B1.23 Date: 06/07/2013 Location(s): Illinois Offices(s): Fermi Site Office

  20. CX-012498: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Light Extraction Structure for OLED Lighting CX(s) Applied: B3.6Date: 41852 Location(s): MarylandOffices(s): National Energy Technology Laboratory

  1. CX-012317: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    High Performance Computing Upgrades CX(s) Applied: B1.31 Date: 06/16/2014 Location(s): Idaho Offices(s): Nuclear Energy

  2. CX-012708: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Test Reactor (ATR) Complex Training Trailer CX(s) Applied: B1.15Date: 41844 Location(s): IdahoOffices(s): Nuclear Energy

  3. Categorical Exclusion Determinations: Nationwide | Department...

    Broader source: Energy.gov (indexed) [DOE]

    ... February 18, 2016 CX-014630: Categorical Exclusion Determination Inspection and Repair of West Hackberry-Sun 42-Inch Crude Oil Pipeline CX(s) Applied: 0 Date: 02182016 ...

  4. Categorical Exclusion Determinations: Strategic Petroleum Reserve...

    Broader source: Energy.gov (indexed) [DOE]

    February 18, 2016 CX-014630: Categorical Exclusion Determination Inspection and Repair of West Hackberry-Sun 42-Inch Crude Oil Pipeline CX(s) Applied: 0 Date: 02182016 ...

  5. CX-007650: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Control Room Consolidation CX(s) Applied: B2.2 Date: 12/29/2011 Location(s): South Carolina Offices(s): Savannah River Operations Office

  6. CX-001856: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination Rural Cooperative Geothermal Development Electric and Agriculture CX(s) Applied: B3.1 Date: 04282010 Location(s): Paisley, Oregon Office(s): Energy...

  7. CX-008545: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Solar Energy Evolution and Diffusion Studies CX(s) Applied: A9 Date: 06/19/2012 Location(s): CX: none Offices(s): Golden Field Office

  8. CX-011822: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Light Willow Demonstration CX(s) Applied: B3.6 Date: 01/09/2014 Location(s): South Carolina Offices(s): Savannah River Operations Office

  9. Categorical Exclusion Determinations: Golden Field Office | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination U.S. Department of Energy Collegiate Entrepreneurship Prize Award Number: TBD FOA CX(s) Applied: A9 Date: 12222014 Location(s): CO...

  10. CX-012656: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    North Bend Communication Site Engine Generator Replacement CX(s) Applied: B1.3Date: 41848 Location(s): WashingtonOffices(s): Bonneville Power Administration

  11. CX-003608: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-003608: Categorical Exclusion Determination Sustainable Algal Energy Production and Environmental Remediation CX(s) Applied: A9, B3.6 Date: 08252010 Location(s): Virginia ...

  12. CX-012278: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Building 36 Use Permit CX(s) Applied: A9 Date: 06/23/2014 Location(s): Oregon Offices(s): National Energy Technology Laboratory

  13. CX-012434: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Low Cost Titanium Casting Technology CX(s) Applied: B3.6Date: 41878 Location(s): OhioOffices(s): National Energy Technology Laboratory

  14. CX-013619: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Upper Lemhi Conservation Easement Acquisition CX(s) Applied: B1.25Date: 05/26/2015 Location(s): IdahoOffices(s): Bonneville Power Administration

  15. CX-007778: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Support Buildings CX(s) Applied: B1.15 Date: 01/13/2012 Location(s): Washington Offices(s): River Protection-Richland Operations Office

  16. CX-014376: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ross Complex Road Project CX(s) Applied: B1.32Date: 11/12/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  17. CX-007418: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sidewalks to School CX(s) Applied: B1.13 Date: 12/13/2011 Location(s): South Carolina Offices(s): Golden Field Office

  18. CX-012602: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sorption of Humate onto SRS Sediment CX(s) Applied: B3.6Date: 41820 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  19. CX-008282: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Biogas Reconditioning Project CX(s) Applied: B5.1 Date: 05/01/2012 Location(s): Nevada Offices(s): National Energy Technology Laboratory

  20. CX-008438: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Biogas Reconditioning Project CX(s) Applied: B5.1 Date: 06/27/2012 Location(s): Nevada Offices(s): National Energy Technology Laboratory

  1. CX-012619: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chromatography and Analytical Sensor Measurements CX(s) Applied: B3.6Date: 41799 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  2. CX-007587: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Gas Chromatography CX(s) Applied: B3.6 Date: 12/29/2011 Location(s): Oregon Offices(s): National Energy Technology Laboratory

  3. CX-010124: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chromatography / Mass Spectrometry CX(s) Applied: B3.6 Date: 03/20/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  4. CX-011534: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Grays River Confluence Property Funding CX(s) Applied: B1.25 Date: 11/08/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  5. CX-011707: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Laser Nanoparticle Lab CX(s) Applied: B3.6 Date: 01/15/2014 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  6. CX-010699: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    North Boulevard Annex Lease Termination CX(s) Applied: B1.24 Date: 07/11/2013 Location(s): Idaho Offices(s): Idaho Operations Office

  7. CX-007417: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Shift CX(s) Applied: B5.1 Date: 12/21/2011 Location(s): Pennsylvania Offices(s): Golden Field Office

  8. CX-011369: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Relief Valve Test Stand Relocation CX(s) Applied: B1.31 Date: 10/24/2013 Location(s): Idaho Offices(s): Idaho Operations Office

  9. CX-013319: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Test Reactor (ATR) Complex Landscaping CX(s) Applied: B5.1Date: 12/16/2014 Location(s): IdahoOffices(s): Nuclear Energy

  10. CX-012722: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Test Reactor Area (TRA)-653 Conference Room Modifications CX(s) Applied: B1.15Date: 41829 Location(s): IdahoOffices(s): Nuclear Energy

  11. CX-013463: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Test Reactor Air Conditioning Upgrades CX(s) Applied: B1.4Date: 02/19/2015 Location(s): IdahoOffices(s): Nuclear Energy

  12. CX-012724: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Test Reactor (ATR) Electronic Message Board Installation CX(s) Applied: B1.7Date: 41830 Location(s): IdahoOffices(s): Nuclear Energy

  13. CX-009018: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    State Energy Program - Tennessee CX(s) Applied: A9, A11 Date: 08/23/2012 Location(s): Tennessee Offices(s): Golden Field Office

  14. CX-009587: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    City of Houston, Texas CX(s) Applied: B5.1 Date: 12/12/2012 Location(s): Texas Offices(s): Golden Field Office

  15. CX-013787: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Bell Substation HVAC Replacement CX(s) Applied: B1.3Date: 06/30/2015 Location(s): OregonOffices(s): Bonneville Power Administration

  16. CX-009237: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    The Dow Chemical Company CX(s) Applied: B5.7 Date: 10/02/2012 Location(s): Texas Offices(s): Fossil Energy

  17. CX-010578: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Celilo Converter Station Upgrades CX(s) Applied: B4.11 Date: 07/25/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  18. CX-008341: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    A-6 Office Building CX(s) Applied: B1.15 Date: 04/19/2012 Location(s): Pennsylvania Offices(s): Naval Nuclear Propulsion Program

  19. CX-012653: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Holcomb-Naselle #1 Access Road Improvements CX(s) Applied: B1.3Date: 41855 Location(s): WashingtonOffices(s): Bonneville Power Administration

  20. CX-012643: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chehalis-Covington #1 Access Roads CX(s) Applied: B1.13Date: 41865 Location(s): WashingtonOffices(s): Bonneville Power Administration

  1. CX-013482: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Administrative Support Complex CX(s) Applied: B1.15Date: 02/26/2015 Location(s): TexasOffices(s): Pantex Site Office

  2. CX-014200: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sagebrush Seedling Planting - ESER CX(s) Applied: B1.20Date: 09/21/2015 Location(s): IdahoOffices(s): Nuclear Energy

  3. CX-100159 Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Proposed Rulemaking for Energy Conservation Standards for Commercial and Industrial Pumps RIN: 1904-AC54 CX(s) Applied: B5.1

  4. CX-012787: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Nationwide AFV Emergency Responder, Recovery, Reconstruction & Investigation CX(s) Applied: B5.15Date: 41906 Location(s): IllinoisOffices(s): Argonne Site Office

  5. CX-012189: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Microbial Laboratory Analysis CX(s) Applied: B3.12 Date: 05/06/2014 Location(s): Illinois Offices(s): Argonne Site Office

  6. CX-012195: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Alfalfa Substation Control House Replacement CX(s) Applied: B4.11 Date: 05/02/2014 Location(s): Washington Offices(s): Bonneville Power Administration

  7. CX-010730: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Paisley Geothermal Integration CX(s) Applied: B1.7 Date: 08/09/2013 Location(s): Oregon Offices(s): Bonneville Power Administration

  8. CX-008883: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Indian Creek Property Funding CX(s) Applied: B1.25 Date: 08/14/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  9. CX-009711: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Tucannon River Substation Expansion Project CX(s) Applied: B4.6 Date: 11/01/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  10. CX-010148: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Merritt Radio Station Upgrade CX(s) Applied: B1.19 Date: 04/18/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  11. CX-014374: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Underwood Tap Structure Relocation CX(s) Applied: B4.13Date: 12/01/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  12. CX-013345: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Plant Accumulators Study CX(s) Applied: B3.6Date: 12/08/2014 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  13. CX-009543: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sopogy Subcontract CX(s) Applied: A9, B5.15 Date: 11/28/2012 Location(s): Hawaii Offices(s): Golden Field Office

  14. CX-012641: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Mossy Rock-Chehalis #1 Access Road Maintenance CX(s) Applied: B1.3Date: 41865 Location(s): WashingtonOffices(s): Bonneville Power Administration

  15. CX-009753: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Propane Corridor Development Program CX(s) Applied: B5.22 Date: 12/06/2012 Location(s): Georgia Offices(s): National Energy Technology Laboratory

  16. CX-014383: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Midway Substation Upgrades CX(s) Applied: B4.6Date: 10/20/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  17. CX-013428: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sempra LNG Marketing, LLC CX(s) Applied: B5.7Date: 01/23/2015 Location(s): LouisianaOffices(s): Fossil Energy

  18. CX-013780: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Troy Substation Tap Yard Expansion CX(s) Applied: B4.11Date: 07/14/2015 Location(s): MontanaOffices(s): Bonneville Power Administration

  19. CX-012482: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Mid-Atlantic Regional Infrastructure Development Project CX(s) Applied: B5.22Date: 41862 Location(s): MarylandOffices(s): National Energy Technology Laboratory

  20. CX-013604: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Corrosion Testing CX(s) Applied: B3.6Date: 03/05/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  1. CX-011116: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sunpath SANFAB CX(s) Applied: B5.16 Date: 08/09/2013 Location(s): Nevada Offices(s): Golden Field Office

  2. CX-006646: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Restoration South of 54-TPX-10CX(s) Applied: B6.1Date: 02/09/2010Location(s): Casper, WyomingOffice(s): RMOTC

  3. CX-011402: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Apel Steel Corporation CX(s) Applied: B5.16 Date: 11/07/2013 Location(s): Alabama Offices(s): Golden Field Office

  4. CX-012583: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Biofuels Production Experiment CX(s) Applied: B3.6Date: 41841 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  5. CX-008973: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Petrography Laboratory CX(s) Applied: B3.6 Date: 08/01/2012 Location(s): West Virginia Offices(s): National Energy Technology Laboratory

  6. CX-012228: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Deer Park Substation Connection Modifications CX(s) Applied: B4.11 Date: 06/17/2014 Location(s): Washington Offices(s): Bonneville Power Administration

  7. CX-009312: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Pecan Street Smart Grid Extension Service CX(s) Applied: A9 Date: 08/30/2012 Location(s): Texas Offices(s): National Energy Technology Laboratory

  8. CX-012795: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    North Bonneville Substation 23- Kilovolt Line Retermination CX(s) Applied: B4.11Date: 41926 Location(s): WashingtonOffices(s): Bonneville Power Administration

  9. CX-011628: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Enclosure Modification Project CX(s) Applied: B1.3 Date: 06/05/2013 Location(s): Tennessee Offices(s): Y-12 Site Office

  10. CX-012580: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Tritium Responsive Infrastructure Modifications CX(s) Applied: B1.15Date: 41844 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  11. CX-007793: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Jonesboro Maintenance Facility Additions CX(s) Applied: B1.15 Date: 05/10/2011 Location(s): Arkansas Offices(s): Southwestern Power Administration

  12. CX-007798: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Springfield Maintenance Garage CX(s) Applied: B1.15 Date: 12/08/2010 Location(s): Missouri Offices(s): Southwestern Power Administration

  13. CX-008729: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Reverse Osmosis System Removal CX(s) Applied: B1.26 Date: 06/25/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  14. CX-010515: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Energy Efficiency Public Service Campaign CX(s) Applied: A9 Date: 06/14/2013 Location(s): New York Offices(s): Golden Field Office

  15. CX-012188: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Emerald Ash Borer Control CX(s) Applied: B1.3 Date: 05/06/2014 Location(s): Illinois Offices(s): Argonne Site Office

  16. CX-010768: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    ZIRCEX Nuclear Fuel Dissolution Testing CX(s) Applied: B3.6 Date: 08/12/2013 Location(s): Idaho Offices(s): Nuclear Energy

  17. CX-003164: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Categorical Exclusion Determination CX-003164: Categorical Exclusion Determination Optimization of Biomass Production Across a Landscape CX(s) Applied: A9 Date: 07262010...

  18. CX-012254: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hydro Research Foundation University Research Awards - Vanderbilt CX(s) Applied: A9 Date: 05/28/2014 Location(s): Tennessee Offices(s): Golden Field Office

  19. CX-012253: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hydro Research Foundation University Research Awards - OSU CX(s) Applied: A9 Date: 05/27/2014 Location(s): Oregon Offices(s): Golden Field Office

  20. CX-012118: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hydro Research Foundation University Research Awards - Tufts CX(s) Applied: A9 Date: 05/21/2014 Location(s): Georgia Offices(s): Golden Field Office

  1. CX-011416: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Technology Integration Program CX(s) Applied: A9, A11 Date: 12/19/2013 Location(s): Ohio Offices(s): National Energy Technology Laboratory

  2. CX-011535: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    East Grangeville Substation Sale CX(s) Applied: B1.24 Date: 11/14/2013 Location(s): Idaho Offices(s): Bonneville Power Administration

  3. CX-012233: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Shed Acquisition at Kalispell Substation CX(s) Applied: B1.24 Date: 06/09/2014 Location(s): Montana Offices(s): Bonneville Power Administration

  4. CX-010157: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Fairmount Substation Equipment Acquisition CX(s) Applied: B1.24 Date: 03/27/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  5. CX-012570: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Install Elevated Fire Water Storage Tank CX(s) Applied: B2.5Date: 41862 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  6. CX-014651: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Chemical Vapor Deposition CX(s) Applied: B3.6Date: 02/17/2016 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  7. CX-012791: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Grizzly Captain Jack Transmission Line Access Road Acquisition CX(s) Applied: B1.24Date: 41935 Location(s): OregonOffices(s): Bonneville Power Administration

  8. CX-012706: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Radiochemistry Laboratory (RCL) Supply Intake Filter Housing CX(s) Applied: B2.5Date: 41858 Location(s): IdahoOffices(s): Nuclear Energy

  9. CX-010113: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Compression Stress Relaxometer CX(s) Applied: B3.6 Date: 03/28/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  10. CX-012472: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Technology Integration Program CX(s) Applied: A9, A11, B3.11Date: 41873 Location(s): OhioOffices(s): National Energy Technology Laboratory

  11. CX-012776: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Catalyst Processing, KCP14-05 CX(s) Applied: NOT NOTEDDate: 41857 Location(s): MissouriOffices(s): Kansas City Site Office

  12. CX-014616: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Biogasification CX(s) Applied: B3.6Date: 01/12/2016 Location(s): West VirginiaOffices(s): National Energy Technology Laboratory

  13. CX-009203: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ross Maintenance Headquarters Project CX(s) Applied: B1.15 Date: 09/19/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  14. CX-011686: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ross Communication Tower Fiber Installation CX(s) Applied: B4.7 Date: 01/15/2014 Location(s): Washington Offices(s): Bonneville Power Administration

  15. CX-009198: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ross Transformer Oil Terminal Upgrade CX(s) Applied: B4.6 Date: 09/24/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  16. CX-012808: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    LURR 20140504 Ross Substation Comcast Fiber Installation CX(s) Applied: B4.9Date: 41906 Location(s): WashingtonOffices(s): Bonneville Power Administration

  17. CX-003520: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    20: Categorical Exclusion Determination CX-003520: Categorical Exclusion Determination Pontiac High School Geothermal CX(s) Applied: B5.1 Date: 08262010 Location(s): Pontiac, ...

  18. CX-001198: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    98: Categorical Exclusion Determination CX-001198: Categorical Exclusion Determination Recovery Act: 1010 Avenue of the Arts - New School and Performing Arts Theater CX(s) Applied: ...

  19. CX-013565: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    65: Categorical Exclusion Determination CX-013565: Categorical Exclusion Determination Analytical Methods for Radiochemical Measurements CX(s) Applied: B3.6 Date: 04162015 ...

  20. CX-012557: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    557: Categorical Exclusion Determination CX-012557: Categorical Exclusion Determination Electrodepositon of Molybdenum, NickelMolybdenum alloy, Cesium, and Strontium CX(s) Applied: ...

  1. CX-001199: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9: Categorical Exclusion Determination CX-001199: Categorical Exclusion Determination Tennessee Energy Efficient Schools Initiative Ground Source Heat Pump Program CX(s) Applied: ...

  2. CX-000703: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    03: Categorical Exclusion Determination CX-000703: Categorical Exclusion Determination Maryland - Clean Energy Economic Development Initiative (CEEDI) CX(s) Applied: A1, A9, A11, ...

  3. CX-010117: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10117: Categorical Exclusion Determination CX-010117: Categorical Exclusion Determination Analytical Methods for Radiochemical Measurements CX(s) Applied: B3.6 Date: 03282013 ...

  4. CX-004024: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    24: Categorical Exclusion Determination CX-004024: Categorical Exclusion Determination Backside Contact Multijunction Solar Cells for High Concentration Applications CX(s) Applied: ...

  5. CX-007550: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Kearney - Waste Water Treatment Plant CX(s) Applied: B5.1 Date: 01/10/2012 Location(s): Missouri Offices(s): Golden Field Office

  6. CX-012788: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Bio-Aviation Fuel LCA with GREET CX(s) Applied: B5.15Date: 41906 Location(s): IllinoisOffices(s): Argonne Site Office

  7. CX-012474: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Refractories/Ceramics Project CX(s) Applied: B3.6Date: 41870 Location(s): OregonOffices(s): National Energy Technology Laboratory

  8. CX-008797: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Coal Pile Basin Project CX(s) Applied: B1.29 Date: 06/04/2012 Location(s): Tennessee Offices(s): Y-12 Site Office

  9. CX-010742: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Integrated Simulation Development and Decision Support CX(s) Applied: A9 Date: 08/15/2013 Location(s): California Offices(s): Golden Field Office

  10. CX-012730: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Replace West Hackberry Radio Tower CX(s) Applied: B1.19Date: 41880 Location(s): LouisianaOffices(s): Strategic Petroleum Reserve Field Office

  11. CX-012531: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Distributed Wireless Antenna Sensors for Boiler Condition CX(s) Applied: B3.6Date: 41836 Location(s): CaliforniaOffices(s): National Energy Technology Laboratory

  12. CX-013309: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Burns Communication Site Upgrade CX(s) Applied: B4.6Date: 01/13/2015 Location(s): OregonOffices(s): Bonneville Power Administration

  13. CX-012539: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Distributed Wireless Antenna Sensors for Boiler Condition CX(s) Applied: B3.6Date: 41836 Location(s): TexasOffices(s): National Energy Technology Laboratory

  14. CX-008146: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Formation Evaluator Tools (Haliburton) CX(s) Applied: B3.7 Date: 09/11/2011 Location(s): Wyoming Offices(s): RMOTC

  15. CX-013417: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Trentwood Substation Communication Upgrade CX(s) Applied: B1.19Date: 02/11/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  16. CX-013389: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Plutonium Characteristics CX(s) Applied: B3.6Date: 01/07/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  17. CX-013521: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chemical Oxygen Demand CX(s) Applied: B3.6Date: 02/03/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  18. CX-010323: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Modify Sprinkler System CX(s) Applied: B1.3 Date: 04/15/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  19. Categorical Exclusion (CX) Determinations By Date | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX(s) Applied: DOEEA-1914 National Renewable Energy Laboratory (NREL) Date: 072815 Location(s): CO Office(s): Golden Field Office July 21, 2015 CX-100313...

  20. FE Categorical Exclusions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Investigation of Cathode Electrocatalytic Activity using Surfaced Engineered Thin Film Samples CX(s) Applied: B3.6 Date: 09082011 Location(s): Pittsburgh,...

  1. CX-011626: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Line Yard Fence Project CX(s) Applied: B1.11 Date: 06/05/2013 Location(s): Tennessee Offices(s): Y-12 Site Office

  2. CX-011630: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    9831 Wall Construction Project CX(s) Applied: B1.3 Date: 06/05/2013 Location(s): Tennessee Offices(s): Y-12 Site Office

  3. CX-011184: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Salmon Creek Pond Property Funding CX(s) Applied: B1.25 Date: 08/29/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  4. CX-010772: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Water Security Test Bed (WSTB) CX(s) Applied: B3.6 Date: 07/17/2013 Location(s): Idaho Offices(s): Nuclear Energy

  5. CX-014570: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    TAN - Monitoring Well Drilling Actions CX(s) Applied: B3.1Date: 04/29/2015 Location(s): IdahoOffices(s): Nuclear Energy

  6. CX-013710: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    SAF-D Project CX(s) Applied: A9Date: 05/26/2015 Location(s): MissouriOffices(s): National Energy Technology Laboratory

  7. CX-012813: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Redmond-Pilot Butte #1 Wood Pole Replacements CX(s) Applied: B1.3Date: 41893 Location(s): OregonOffices(s): Bonneville Power Administration

  8. CX-012816: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Rogue-Gold Beach Access Road Improvement CX(s) Applied: B1.3Date: 41890 Location(s): OregonOffices(s): Bonneville Power Administration

  9. CX-009132: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Landfill Gas Utilization Plant CX(s) Applied: B5.21 Date: 08/02/2012 Location(s): New York Offices(s): Golden Field Office

  10. CX-009542: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Solar Parks Project CX(s) Applied: B5.16 Date: 11/09/2012 Location(s): Florida Offices(s): Golden Field Office

  11. CX-012796: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Big Eddy-Redmond #1 Wood Pole Replacements CX(s) Applied: B1.3Date: 41919 Location(s): OregonOffices(s): Bonneville Power Administration

  12. CX-012038: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Deepwater Reverse-Circulation Primary Cementing CX(s) Applied: A9 Date: 04/17/2014 Location(s): Texas Offices(s): National Energy Technology Laboratory

  13. CX-009159: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Montana Formaul State Energy Program CX(s) Applied: A9, A11 Date: 09/06/2012 Location(s): Montana Offices(s): Golden Field Office

  14. CX-012433: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Computer Simulation and Prototype Construction and Testing CX(s) Applied: A9Date: 41878 Location(s): GeorgiaOffices(s): National Energy Technology Laboratory

  15. CX-012636: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Woodward Meadows Property Acquisition Funding CX(s) Applied: B1.25Date: 41876 Location(s): MontanaOffices(s): Bonneville Power Administration

  16. CX-004247: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination CX-004247: Categorical Exclusion Determination Carolina Blue Skies Initiative CX(s) Applied: A1, B5.1 Date: 10142010 Location(s): Indian Trail,...

  17. CX-011712: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Midwest Region Alternative Fuels Project CX(s) Applied: A1 Date: 01/08/2014 Location(s): Missouri Offices(s): National Energy Technology Laboratory

  18. CX-100160 Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Proposed Rulemaking for Energy Conservation Standards for Residential Dehumidifiers RIN: 1904-AC81 CX(s) Applied: B5.1

  19. CX-009325: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Microbiology Laboratory CX(s) Applied: B3.6 Date: 10/01/2012 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  20. CX-010258: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Bangladesh Meteorological Instrumentation Installation CX(s) Applied: A9 Date: 04/26/2013 Location(s): Colorado Offices(s): Golden Field Office

  1. CX-009617: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Gas Mass Spectrometry CX(s) Applied: B3.6 Date: 11/07/2012 Location(s): South Carolina Offices(s): Savannah River Operations Office

  2. CX-008203: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Energize Missouri HUG Demoret CX(s) Applied: B5.19 Date: 03/23/2012 Location(s): Missouri Offices(s): Golden Field Office

  3. CX-008241: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Energize Missouri HUG Teter CX(s) Applied: B5.19 Date: 05/15/2012 Location(s): Missouri Offices(s): Golden Field Office

  4. CX-008205: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Energize Missouri HUG Weaver CX(s) Applied: B5.19 Date: 03/23/2012 Location(s): Missouri Offices(s): Golden Field Office

  5. CX-007407: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Floating Turbine CX(s) Applied: A9 Date: 12/07/2011 Location(s): Ohio Offices(s): Golden Field Office

  6. CX-011189: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Naselle Ridge Emergency Generator Replacement CX(s) Applied: B4.6 Date: 08/26/2013 Location(s): Washington Offices(s): Bonneville Power Administration

  7. CX-010693: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conversion of Waste Carbon Dioxide and Shale Gas to High Value Chemicals CX(s) Applied: ... lower energy content, carbon footprint, and cost than today's petrochemical versions. ...

  8. CX-010797: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Serration Behavior of High Entropy Alloys CX(s) Applied: A9 Date: 08/14/2013 Location(s): Illinois Offices(s): National Energy Technology Laboratory

  9. CX-007833: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Energy Retrofits CX(s) Applied: B5.1 Date: 11/29/2011 Location(s): Colorado Offices(s): Energy Efficiency and Renewable Energy

  10. CX-011753: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CX-011753: Categorical Exclusion Determination LanzaTech Inc. - Process Intensification of Biological Natural Gas Conversion through Novel Bioreactors Designs CX(s) Applied: B3.6 ...

  11. CX-007795: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Easement Acquisition, Carroll County, Arkansas CX(s) Applied: B1.24 Date: 02/07/2011 Location(s): Arkansas Offices(s): Southwestern Power Administration

  12. CX-007794: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Grandview, Arkansas Interconnection CX(s) Applied: B4.12 Date: 04/08/2011 Location(s): Arkansas Offices(s): Southwestern Power Administration

  13. CX-009698: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sale of Lakeside Radio Station CX(s) Applied: B1.24 Date: 12/27/2012 Location(s): Oregon Offices(s): Bonneville Power Administration

  14. CX-014365: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Ferry Butte Communication Facility Upgrades CX(s) Applied: B1.19Date: 12/10/2015 Location(s): IdahoOffices(s): Bonneville Power Administration

  15. CX-008691: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Mason Substation Metering Replacement Project CX(s) Applied: B1.7 Date: 06/25/2012 Location(s): Washington Offices(s): Bonneville Power Administration

  16. CX-014366: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chemawa Substation Wireless Communication Facility CX(s) Applied: B1.19Date: 12/08/2015 Location(s): OregonOffices(s): Bonneville Power Administration

  17. CX-013798: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Bellingham Substation Upgrades CX(s) Applied: B1.3Date: 06/11/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  18. CX-012313: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chicago Office Technical Support Services Contract CX(s) Applied: A8 Date: 06/13/2014 Location(s): CX: none Offices(s): Chicago Office

  19. CX-007517: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    UPF Mock Wall Project CX(s) Applied: B3.6 Date: 11/29/2011 Location(s): Tennessee Offices(s): Y-12 Site Office

  20. CX-010717: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Moodys Radio Tower Land Acquisition CX(s) Applied: B1.24 Date: 07/15/2013 Location(s): Oklahoma Offices(s): Southwestern Power Administration

  1. CX-008588: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    St. Petersburg Solar Pilot Project CX(s) Applied: B5.1 Date: 07/19/2012 Location(s): Florida Offices(s): Golden Field Office

  2. CX-014697: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Zinc Bromide Removal CX(s) Applied: B1.28Date: 12/15/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  3. CX-012728: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    BHP-3 Offsite Bump Repair CX(s) Applied: B1.3Date: 41885 Location(s): TexasOffices(s): Strategic Petroleum Reserve Field Office

  4. CX-007869: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Solar Ready KC CX(s) Applied: A9, A11 Date: 01/27/2012 Location(s): Missouri Offices(s): Golden Field Office

  5. CX-013324: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wear Laboratory CX(s) Applied: A9, B3.6Date: 01/16/2015 Location(s): OregonOffices(s): National Energy Technology Laboratory

  6. CX-012097: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Microgrid Demonstration Project CX(s) Applied: B5.15 Date: 03/24/2014 Location(s): Idaho Offices(s): Idaho Operations Office

  7. CX-009630: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    ICP Routine Maintenance CX(s) Applied: B1.3 Date: 11/06/2012 Location(s): Idaho Offices(s): Idaho Operations Office

  8. CX-014387: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Eagle Fish Hatchery Maintenance Funding CX(s) Applied: B1.3Date: 10/13/2015 Location(s): IdahoOffices(s): Bonneville Power Administration

  9. CX-002452: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assessment of the Environmental Effects of Hydrokinetic Turbines on Fish CX(s) Applied: ... to determine injury and survival rates for fish passing through hydrokinetic turbines. ...

  10. CX-011069: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Induction Furnace Melting CX(s) Applied: B3.6 Date: 08/29/2013 Location(s): Oregon Offices(s): National Energy Technology Laboratory

  11. CX-006211: Categorical Exclusion Determination | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination Missouri Independent Energy Efficiency Program: Henniges Automotive - Process Air Compressor Upgrades CX(s) Applied: B5.1 Date: 07182011 Location(s):...

  12. CX-013796: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chehalis District Access Road Maintenance CX(s) Applied: B4.6Date: 06/15/2015 Location(s): WashingtonOffices(s): Bonneville Power Administration

  13. CX-013513: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Heavy Mineral Separation CX(s) Applied: B3.6Date: 02/05/2015 Location(s): South CarolinaOffices(s): Savannah River Operations Office

  14. CX-011165: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Heavy Mineral Separation CX(s) Applied: B3.6 Date: 08/07/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  15. CX-008215: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Small Hydropower Research and Development Technology Project CX(s) Applied: A9 Date: 04/03/2012 Location(s): Colorado Offices(s): Golden Field Office

  16. CX-012006: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Minto Lodge Rehabilitation CX(s) Applied: B5.1 Date: 04/15/2014 Location(s): Alaska Offices(s): Golden Field Office

  17. CX-013823: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Electric Vehicle Infrastructure (EVI) Laboratory Upgrades CX(s) Applied: B1.31Date: 06/18/2015 Location(s): IdahoOffices(s): Nuclear Energy

  18. CX-013464: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Bond Strength Laser Shock Testing CX(s) Applied: B1.31Date: 02/18/2015 Location(s): IdahoOffices(s): Nuclear Energy

  19. CX-014404: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    Microgrid Research Laboratory Remodel CX(s) Applied: B1.31Date: 11/30/2015 Location(s): IdahoOffices(s): Nuclear Energy

  20. CX-012716: Categorical Exclusion Determination

    Office of Energy Efficiency and Renewable Energy (EERE)

    General Scientific Infrastructure Support for University of Wisconsin CX(s) Applied: B1.31Date: 41844 Location(s): WisconsinOffices(s): Nuclear Energy