Sample records for bookstore phone dc

  1. Phone Sex

    E-Print Network [OSTI]

    Flamingo

    1995-01-01T23:59:59.000Z

    Phone Se by Flamingo art by KOZ PrmtedinUSA $SJ fS wv) p?l iSI PHCNE %t\\ By flamingo Illustrated by KOZ Editors: Tosya Stohn La Gavia Text & Titles: Jazz Printer: Kinko's ofGrand Rapids, MI Authorized Distributor Tb

  2. Bi-directional dc-dc Converter

    Broader source: Energy.gov (indexed) [DOE]

    Purpose of Work for FY08 1. Vehicle modeling, simulation, and operation voltages optimization. 2. DC-DC Power converter and control modeling. 3. Silicon Carbide device...

  3. Bi-directional dc-dc Converter

    Broader source: Energy.gov (indexed) [DOE]

    MTBF Dc-dc Fabrication Validation Data Performance Validation BOM and Cost analysis EMIEMC Custom Components Fabrication Components Validation Vehicle System Review Phase-I...

  4. Bookstore orders from the United Kingdom, Europe, Africa, the Middle East, India, and Pakistan and all sales enquiries should be directed to our United Kingdom distributor

    E-Print Network [OSTI]

    Landweber, Laura

    Bookstore orders from the United Kingdom, Europe, Africa, the Middle East, India, and Pakistan Kingdom Tel: +44 207 515 1011 peter@jjacques.demon.co.uk Pakistan-- Saleem A. Malik World Press 27-1 Al Firdous Avenue Faiz Road, Muslim Town Lahore 54600 Punjab, Pakistan Tel: +92 042 3588 1617 worldpress

  5. Radio frequency dc-dc power conversion

    E-Print Network [OSTI]

    Rivas, Juan, 1976-

    2007-01-01T23:59:59.000Z

    THIS THESIS addresses the development of system architectures and circuit topologies for dc-dc power conversion at very high frequencies. The systems architectures that are developed are structured to overcome limitations ...

  6. Emergency phones, exterior residence hall phones, and pay phones Pay-by-Space Parking

    E-Print Network [OSTI]

    Emergency phones, exterior residence hall phones, and pay phones Pay-by-Space Parking Meter Parking Pay-by- Space Parking VehicleThoroughfares N Pitkin Street Lake Street College Avenue Underpass Annual

  7. A Noise-Shaped Switched-Capacitor DC-DC Voltage Regulator A. Rao, W.McIntyre 1

    E-Print Network [OSTI]

    Moon, Un-Ku

    -dc converter with fractional gains. The charge pump used to convert the input voltage acts as a D/A converter the inductive conversion topology has been the standard solution to providing a constant and stable voltage from a battery. With the continued shrinking of the hand-held devices as cell phones, PDA's, pagers and laptops

  8. Cell Phone Detection Techniques

    SciTech Connect (OSTI)

    Pratt, Richard M.; Bunch, Kyle J.; Puzycki, David J.; Slaugh, Ryan W.; Good, Morris S.; McMakin, Douglas L.

    2007-10-01T23:59:59.000Z

    A team composed of Rick Pratt, Dave Puczyki, Kyle Bunch, Ryan Slaugh, Morris Good, and Doug McMakin teamed together to attempt to exploit cellular telephone features and detect if a person was carrying a cellular telephone into a Limited Area. The cell phone’s electromagnetic properties were measured, analyzed, and tested in over 10 different ways to determine if an exploitable signature exists. The method that appears to have the most potential for success without adding an external tag is to measure the RF spectrum, not in the cell phone band, but between 240 and 400MHz. Figures 1- 7 show the detected signal levels from cell phones from three different manufacturers.

  9. Mobile phone companies sell more batteries than phones to

    E-Print Network [OSTI]

    Starner, Thad E.

    Mobile phone companies sell more batteries than phones to consumers. The devices users buy gen- erally include rechargeable batteries so that they are immediately useful. On average, however, the consumer must own more than one battery during the phone's life. The same is probably true for laptops

  10. DC source assemblies

    DOE Patents [OSTI]

    Campbell, Jeremy B; Newson, Steve

    2013-02-26T23:59:59.000Z

    Embodiments of DC source assemblies of power inverter systems of the type suitable for deployment in a vehicle having an electrically grounded chassis are provided. An embodiment of a DC source assembly comprises a housing, a DC source disposed within the housing, a first terminal, and a second terminal. The DC source also comprises a first capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the first terminal. The DC source assembly further comprises a second capacitor having a first electrode electrically coupled to the housing, and a second electrode electrically coupled to the second terminal.

  11. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2013-01-01T23:59:59.000Z

    resources, a 10 kW vertical axis wind turbine, and Fig. 4AC-grid Fig. 3. Vertical axis wind turbine in the AIT DC µ

  12. Building Scale DC Microgrids

    E-Print Network [OSTI]

    Marnay, Chris

    2014-01-01T23:59:59.000Z

    resources, a 10 kW vertical axis wind turbine, and Fig. 4the µgrid Fig. 3. Vertical axis wind turbine in the AIT DC µ

  13. Multilevel DC link inverter

    DOE Patents [OSTI]

    Su, Gui-Jia

    2003-06-10T23:59:59.000Z

    A multilevel DC link inverter and method for improving torque response and current regulation in permanent magnet motors and switched reluctance motors having a low inductance includes a plurality of voltage controlled cells connected in series for applying a resulting dc voltage comprised of one or more incremental dc voltages. The cells are provided with switches for increasing the resulting applied dc voltage as speed and back EMF increase, while limiting the voltage that is applied to the commutation switches to perform PWM or dc voltage stepping functions, so as to limit current ripple in the stator windings below an acceptable level, typically 5%. Several embodiments are disclosed including inverters using IGBT's, inverters using thyristors. All of the inverters are operable in both motoring and regenerating modes.

  14. Waste Toolkit A-Z Mobile phones

    E-Print Network [OSTI]

    Melham, Tom

    Waste Toolkit A-Z Mobile phones How to recycle your mobile phone Recycling your mobile phone makes the deep forests in the Congo in central Africa. The Congo's mining business has in recent years led and recycling can help to reduce the demand for new raw materials. Do not put mobile phones in the recycling

  15. DC attenuation meter

    DOE Patents [OSTI]

    Hargrove, Douglas L.

    2004-09-14T23:59:59.000Z

    A portable, hand-held meter used to measure direct current (DC) attenuation in low impedance electrical signal cables and signal attenuators. A DC voltage is applied to the signal input of the cable and feedback to the control circuit through the signal cable and attenuators. The control circuit adjusts the applied voltage to the cable until the feedback voltage equals the reference voltage. The "units" of applied voltage required at the cable input is the system attenuation value of the cable and attenuators, which makes this meter unique. The meter may be used to calibrate data signal cables, attenuators, and cable-attenuator assemblies.

  16. A global maximum power point tracking DC-DC converter

    E-Print Network [OSTI]

    Duncan, Joseph, 1981-

    2005-01-01T23:59:59.000Z

    This thesis describes the design, and validation of a maximum power point tracking DC-DC converter capable of following the true global maximum power point in the presence of other local maximum. It does this without the ...

  17. DC arc weld starter

    DOE Patents [OSTI]

    Campiotti, Richard H. (Tracy, CA); Hopwood, James E. (Oakley, CA)

    1990-01-01T23:59:59.000Z

    A system for starting an arc for welding uses three DC power supplies, a high voltage supply for initiating the arc, an intermediate voltage supply for sustaining the arc, and a low voltage welding supply directly connected across the gap after the high voltage supply is disconnected.

  18. Mobile phone and my health

    SciTech Connect (OSTI)

    Surducan, Aneta [Nicolae Balcescu High School, 6 Constanta St., 400158 Cluj-Napoca (Romania)] [Nicolae Balcescu High School, 6 Constanta St., 400158 Cluj-Napoca (Romania); Dabala, Dana [National Railways Medical Clinic,, Occupational Medicine Department, 16-20 Republicii St., 400015 Cluj-Napoca (Romania)] [National Railways Medical Clinic,, Occupational Medicine Department, 16-20 Republicii St., 400015 Cluj-Napoca (Romania); Neamtu, Camelia, E-mail: emanoil.surducan@itim-cj.ro; Surducan, Vasile, E-mail: emanoil.surducan@itim-cj.ro; Surducan, Emanoil, E-mail: emanoil.surducan@itim-cj.ro [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath St., 400293 Cluj-Napoca (Romania)] [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath St., 400293 Cluj-Napoca (Romania)

    2013-11-13T23:59:59.000Z

    The interaction of the microwave radiation emitted by mobile phones with the user's body is analyzed from the International Commission on Non-Ionizing Radiation Protection (ICNIRP) recommendations perspective as a correlation between the specific absorption ratio (SAR) of the mobile phone and the call duration. The relative position of the cell phone to the user's body, the dielectric properties of the exposed body parts, the SAR value and the call duration are considered in the local body temperature rise due to the microwave heating effect. The recommended local temperature rise limit in the human body is evaluated according to standards. The aim of this study is to disseminate information to young people, especially high school students, about the microwave thermal effects on the human body, to make them aware of the environmental electromagnetic pollution and to offer them a simple method of biological self protection.

  19. Batteries, mobile phones & small electrical devices

    E-Print Network [OSTI]

    , mobile phones and data collection equipment. Lithium Ion batteries are used in mobile phones, laptopsBatteries, mobile phones & small electrical devices IN-BUILDING RECYCLING STATIONS. A full list of acceptable items: Sealed batteries ­excludes vented NiCad and Lead acid batteries Cameras Laser printer

  20. EMERGENCY PHONE NUMBERS Medical Emergency

    E-Print Network [OSTI]

    Chou, James

    /Illness 4. Fire/Smoke/Explosion 5. Utility Disruption 6. Threat 7. Suspicious Package/Item 8. Hazardous Operations Center (617) 495-5560 · Fire/Smoke/Explosion · Flooding · Hazardous Material · Utility Failure. Describe the type of emergency (fire, medical, utility disruption, public safety, etc). Give the phone

  1. Auxiliary resonant DC tank converter

    DOE Patents [OSTI]

    Peng, Fang Z. (Knoxville, TN)

    2000-01-01T23:59:59.000Z

    An auxiliary resonant dc tank (ARDCT) converter is provided for achieving soft-switching in a power converter. An ARDCT circuit is coupled directly across a dc bus to the inverter to generate a resonant dc bus voltage, including upper and lower resonant capacitors connected in series as a resonant leg, first and second dc tank capacitors connected in series as a tank leg, and an auxiliary resonant circuit comprising a series combination of a resonant inductor and a pair of auxiliary switching devices. The ARDCT circuit further includes first clamping means for holding the resonant dc bus voltage to the dc tank voltage of the tank leg, and second clamping means for clamping the resonant dc bus voltage to zero during a resonant period. The ARDCT circuit resonantly brings the dc bus voltage to zero in order to provide a zero-voltage switching opportunity for the inverter, then quickly rebounds the dc bus voltage back to the dc tank voltage after the inverter changes state. The auxiliary switching devices are turned on and off under zero-current conditions. The ARDCT circuit only absorbs ripples of the inverter dc bus current, thus having less current stress. In addition, since the ARDCT circuit is coupled in parallel with the dc power supply and the inverter for merely assisting soft-switching of the inverter without participating in real dc power transmission and power conversion, malfunction and failure of the tank circuit will not affect the functional operation of the inverter; thus a highly reliable converter system is expected.

  2. Power flow analysis for DC voltage droop controlled DC microgrids

    E-Print Network [OSTI]

    Chaudhary, Sanjay

    loss, such as photovoltaic panels, batteries, fuel cells, LEDs, and electronic loads, DC microgrids sharing and secondary voltage regulation can now be analytically studied, and specialized optimization of the DC microgrid, in term of systematic analysis, protection coordination design, network optimization

  3. Triple voltage dc-to-dc converter and method

    DOE Patents [OSTI]

    Su, Gui-Jia (Knoxville, TN)

    2008-08-05T23:59:59.000Z

    A circuit and method of providing three dc voltage buses and transforming power between a low voltage dc converter and a high voltage dc converter, by coupling a primary dc power circuit and a secondary dc power circuit through an isolation transformer; providing the gating signals to power semiconductor switches in the primary and secondary circuits to control power flow between the primary and secondary circuits and by controlling a phase shift between the primary voltage and the secondary voltage. The primary dc power circuit and the secondary dc power circuit each further comprising at least two tank capacitances arranged in series as a tank leg, at least two resonant switching devices arranged in series with each other and arranged in parallel with the tank leg, and at least one voltage source arranged in parallel with the tank leg and the resonant switching devices, said resonant switching devices including power semiconductor switches that are operated by gating signals. Additional embodiments having a center-tapped battery on the low voltage side and a plurality of modules on both the low voltage side and the high voltage side are also disclosed for the purpose of reducing ripple current and for reducing the size of the components.

  4. DC-DC converter current source fed naturally commutated brushless DC motor drive 

    E-Print Network [OSTI]

    Khopkar, Rahul Vijaykumar

    2004-11-15T23:59:59.000Z

    inductor and the huge number of turns needed to achieve these values of the inductances lead to huge resistive losses. Therefore, it is shown that it is possible to replace the controlled rectifier and the large inductor with a suitable dc-dc converter...

  5. DC WRRC REPORT NO. 115 Conference Proceedings

    E-Print Network [OSTI]

    District of Columbia, University of the

    DC WRRC REPORT NO. 115 Conference Proceedings: An Agenda for Black Universities and Colleges. Kargbo Conference Sponsored by The DC Water Resources Research Center University of the District

  6. Bi-Directional DC-DC Converter for PHEV Applications

    SciTech Connect (OSTI)

    Abas Goodarzi

    2011-01-31T23:59:59.000Z

    Plug-In Hybrid Electric Vehicles (PHEV) require high power density energy storage system (ESS) for hybrid operation and high energy density ESS for Electric Vehicle (EV) mode range. However, ESS technologies to maximize power density and energy density simultaneously are not commercially feasible. The use of bi-directional DC-DC converter allows use of multiple energy storage, and the flexible DC-link voltages can enhance the system efficiency and reduce component sizing. This will improve fuel consumption, increase the EV mode range, reduce the total weight, reduce battery initial and life cycle cost, and provide flexibility in system design.

  7. Convergence Analysis of DC Algorithm for DC programming with ...

    E-Print Network [OSTI]

    2010-09-14T23:59:59.000Z

    In this paper, we consider DC programming with subanalytic data. ... Lojasiewicz inequality is an ingredient tool in Subanalytic Geometry as well as in its ... us list some of the elementary properties of subanalytic sets and subanalytic functions ...

  8. The iPhone Goes Downstream: Mandatory Universal Distribution?

    E-Print Network [OSTI]

    Karp, Larry; Perloff, Jeffrey

    2011-01-01T23:59:59.000Z

    Paper 1125 The iPhone Goes Downstream: mandatory universalauthor(s). The iPhone Goes Downstream: Mandatory UniversaliPhones using a single downstream vendor prompted calls for

  9. Contributions of Cell Phones to Economic Development in

    E-Print Network [OSTI]

    Anderson, Richard

    Contributions of Cell Phones to Economic Development in Africa: An Information Study of Corn · Background · Motivation · research questions/hypotheses · Framework · Methodology · Contributions to impact corn growers cell phone usage · RH 2: Agricultural information carried on cell phone is more

  10. 1 Addressing Blindness via Cell Phones

    E-Print Network [OSTI]

    -evaluation eye diagnostic tool that attaches to a cell phone and uses a light-scattering technique to scan1 Addressing Blindness via Cell Phones 2 Welcome Letter 3 15 Years of SDM 4 Product Requirements for Contemporary Challenges > Using Systems Thinking to Fuel High-Velocity Organizations > Applying Systems

  11. Austin Energy Dials Down Home Energy Use With Smart Phones |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Austin Energy Dials Down Home Energy Use With Smart Phones Austin Energy Dials Down Home Energy Use With Smart Phones bbrnstoriesaustinenergy9-2-14.jpg Better Buildings...

  12. Catalog of DC Appliances and Power Systems

    SciTech Connect (OSTI)

    Garbesi, Karina; Vossos, Vagelis; Shen, Hongxia

    2010-10-13T23:59:59.000Z

    This document catalogs the characteristics of current and potential future DC products and power systems.

  13. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    energy efficient products that utilize DC power internally; the demonstrated energy savings of direct-DC in commercial data centers;energy efficient products that utilize DC power internally, the demonstrated energy savings of direct-DC power use in commercial data centers,

  14. UH Mnoa Bookstore Computer Department

    E-Print Network [OSTI]

    with faster graphics, flash storage, and longer battery life. MD101LL/A SKU: 2018444 MacBook Pro (13.3" LED (11.6" LED Display / 1.4GHz Intel Core i5 Dual-Core Processor / 4GB RAM / 128GB Flash Storage / Intel / 1.3GHz Intel Core i5 Dual-Core Processor / 4GB RAM / 256GB Flash Storage / Intel HD Graphics 5000

  15. Campus Contacts Titan Bookstore Cafe

    E-Print Network [OSTI]

    de Lijser, Peter

    will receive them in a timely fashion. Thanks! We thank the Irvine Valley Faculty for their presence for a relaxing and happy holiday vacation. After all your hard work this semester, you deserve it! We look

  16. Switching coordination of distributed dc-dc converters for highly efficient photovoltaic power plants

    DOE Patents [OSTI]

    Agamy, Mohammed; Elasser, Ahmed; Sabate, Juan Antonio; Galbraith, Anthony William; Harfman Todorovic, Maja

    2014-09-09T23:59:59.000Z

    A distributed photovoltaic (PV) power plant includes a plurality of distributed dc-dc converters. The dc-dc converters are configured to switch in coordination with one another such that at least one dc-dc converter transfers power to a common dc-bus based upon the total system power available from one or more corresponding strings of PV modules. Due to the coordinated switching of the dc-dc converters, each dc-dc converter transferring power to the common dc-bus continues to operate within its optimal efficiency range as well as to optimize the maximum power point tracking in order to increase the energy yield of the PV power plant.

  17. Light-weight DC to very high voltage DC converter

    DOE Patents [OSTI]

    Druce, Robert L. (Union City, CA); Kirbie, Hugh C. (Dublin, CA); Newton, Mark A. (Livermore, CA)

    1998-01-01T23:59:59.000Z

    A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current.

  18. Light-weight DC to very high voltage DC converter

    DOE Patents [OSTI]

    Druce, R.L.; Kirbie, H.C.; Newton, M.A.

    1998-06-30T23:59:59.000Z

    A DC-DC converter capable of generating outputs of 100 KV without a transformer comprises a silicon opening switch (SOS) diode connected to allow a charging current from a capacitor to flow into an inductor. When a specified amount of charge has flowed through the SOS diode, it opens up abruptly; and the consequential collapsing field of the inductor causes a voltage and current reversal that is steered into a load capacitor by an output diode. A switch across the series combination of the capacitor, inductor, and SOS diode closes to periodically reset the SOS diode by inducing a forward-biased current. 1 fig.

  19. AC and DC power transmission

    SciTech Connect (OSTI)

    Not Available

    1985-01-01T23:59:59.000Z

    The technical and economic assessment of AC and DC transmission systems; long distance transmission, cable transmission, system inter-connection, voltage support, reactive compensation, stabilisation of systems; parallel operation of DC links with AC systems; comparison between alternatives for particular schemes. Design and application equipment: design, testing and application of equipment for HVDC, series and shunt static compensated AC schemes, including associated controls. Installations: overall design of stations and conductor arrangements for HVDC, series and shunt static AC schemes including insulation co-ordination. System analysis and modelling.

  20. DC to DC power converters and methods of controlling the same

    DOE Patents [OSTI]

    Steigerwald, Robert Louis; Elasser, Ahmed; Sabate, Juan Antonio; Todorovic, Maja Harfman; Agamy, Mohammed

    2012-12-11T23:59:59.000Z

    A power generation system configured to provide direct current (DC) power to a DC link is described. The system includes a first power generation unit configured to output DC power. The system also includes a first DC to DC converter comprising an input section and an output section. The output section of the first DC to DC converter is coupled in series with the first power generation unit. The first DC to DC converter is configured to process a first portion of the DC power output by the first power generation unit and to provide an unprocessed second portion of the DC power output of the first power generation unit to the output section.

  1. 500 Fifth Street, NW Phone: 202 334 2934 Washington, DC 20001 Fax: 202 334 2003

    E-Print Network [OSTI]

    .TRB.org November 11, 2010 Nauman M. Sheikh Texas Transportation Institute Texas A&M University System MS-3135 College Station, TX 77843-3135 Roger P. Bligh Texas Transportation Institute Texas A&M University System MS-3135 College Station, TX 77843-3135 Richard B. Albin Federal Highway Administration 12300 West

  2. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    main conclusions about off-grid markets for DC appliances,and power systems. Mature Off-Grid Markets for DC Appliancesapplications include off-grid residential, telecom, remote

  3. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    DC Conversion Loss Savings of Appliances Running on DirectConversion Loss Savings of Appliances Running on Direct DCrunning on AC and, in column B, the avoided AC-DC conversions losses

  4. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    DC solar-powered DC air-conditioning heat pump produced byRoom Air Conditioners Geothermal Heat Pumps Lighting-efficiency of an air source electric heat-pump water heater

  5. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    and energy-savings potential of using direct current (DC) generated by on-site renewablepotential, benefits, and barriers of using DC generated by on-site renewable energy

  6. DC systems with transformerless converters

    SciTech Connect (OSTI)

    Vithayathil, J.J.; Mittlestadt, W. [Bonneville Power Administration, Portland, OR (United States)] [Bonneville Power Administration, Portland, OR (United States); Bjoerklund, P.E. [ABB Power Systems AB, Ludvika (Sweden)] [ABB Power Systems AB, Ludvika (Sweden)

    1995-07-01T23:59:59.000Z

    A technical and economic feasibility study of HVDC systems without converter transformers is presented. The presentation includes proposed solutions to the drawback related to the absence of galvanic separation between the ac and dc systems, if the converter transformers are eliminated. The results show that HVDC systems without converter transformers are both technically and economically feasible. The cost savings can be substantial.

  7. FEDERAL COMMUNICATIONS COMMISSION Washington, DC

    E-Print Network [OSTI]

    Peha, Jon M.

    1 Before the FEDERAL COMMUNICATIONS COMMISSION Washington, DC GN Docket No. 14-28 In the Matter 15213-3890 peha@cmu.edu July 15, 2014 #12;2 Executive Summary It is important for the Commission situated entity. This policy would particularly benefit new entrepreneurial ventures. The Commission should

  8. FC/Battery Power Management for Electric Vehicle Based Interleaved dc-dc Boost Converter Topology

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    FC/Battery Power Management for Electric Vehicle Based Interleaved dc- dc Boost Converter Topology.fr Keywords Fuel cell System (FCS), Electric vehicle, Energy management, Interleaved Boost DC-DC Converter (FC for electric vehicle may not be feasible to satisfy the peak demand changes especially during accelerations

  9. Design and development of a DC-DC converter for a fuel cell inverter system

    E-Print Network [OSTI]

    Gopinath, Rajesh

    2001-01-01T23:59:59.000Z

    This thesis outlines the design and development of a DC-DC converter for a fuel cell inverter application. The proposed DC-DC converter was designed and tested at Texas A&M to meet the specifications laid down for the '2001 Future Energy Challenge...

  10. Analysis and design of a high power dc-dc converter

    E-Print Network [OSTI]

    Husain, Iqbal

    1989-01-01T23:59:59.000Z

    , for example in dc motors, traction motor control, marine hoist~, trolley cars, forklift trucks, mine haulers, dc voltage regulators etc. These choppers can be used for regeneration in the braking mode of a. dc motor pumping energy back to the system.... The elements of a dc-dc SP C are shown in figure 1. 2. The output voltage is usually regulated by pulse width modulation (PAVM) techniques. Input + V, DC Chopper Output V, Control Amp. V, + Ref. Fig. 1. 2 Block diagram of a SPC dc chopper...

  11. Prof. Roger Wattenhofer phone +41 44 632 6312

    E-Print Network [OSTI]

    contact us by email or phone. Advisors Philipp Sommer sommer@tik.ee.ethz.ch 044 632 7838 Roland Flury

  12. Mobile Phone Based Drifting Lagrangian Flow Sensors

    E-Print Network [OSTI]

    predicting the outcome and impact of silt disturbed by dredging operations; maintaining the health of fish a new approach to the design of low-cost floating sensors for hydrodynamic studies, leveraging low-cost mobile phone sensor platforms have recently been developed to provide low-cost sensor data collection [1

  13. Active dc filter for HVDC systems

    SciTech Connect (OSTI)

    Zhang, W. (Royal Inst. of Tech., Stockholm (Sweden)); Asplund, G.

    1994-01-01T23:59:59.000Z

    This article is a case history of the installation of active dc filters for high-performance, low-cost harmonics filtering at the Lindome converter station in the Konti-Skan 2 HVDC transmission link between Denmark and Sweden. The topics of the article include harmonics, interference, and filters, Lindome active dc filter, active dc filter design, digital signal processor, control scheme, protection and fault monitoring, and future applications.

  14. Computer-aided optimization of DC/DC converters for automotive applications

    E-Print Network [OSTI]

    Neugebauer, Timothy C.

    This paper investigates computer-aided optimization of DC/DC converters, with a focus on converters for dual-voltage automotive electrical systems. A new CAD optimization approach based on Monte Carlo search methods is ...

  15. High efficiency resonant dc/dc converter for solar power applications

    E-Print Network [OSTI]

    Inam, Wardah

    2013-01-01T23:59:59.000Z

    This thesis presents a new topology for a high efficiency dc/dc resonant power converter that utilizes a resistance compression network to provide simultaneous zero voltage switching and near zero current switching across ...

  16. New Architectures for Radio-Frequency DC-DC Power Conversion

    E-Print Network [OSTI]

    Rivas, Juan M.

    This document proposes two new architectures for switched-mode dc–dc power conversion. The proposed architectures enable dramatic increases in switching frequency to be realized while preserving features critical in practice, ...

  17. Optimization of Integrated Transistors for Very High Frequency DC-DC Converters

    E-Print Network [OSTI]

    Sagneri, Anthony D.

    This paper presents a method to optimize integrated lateral double-diffused MOSFET transistors for use in very high frequency (VHF, 30-300 MHz) dc-dc converters. A transistor model valid at VHF switching frequencies is ...

  18. DC to DC power conversion module for the all-electric ship

    E-Print Network [OSTI]

    Gray, Weston L

    2011-01-01T23:59:59.000Z

    The MIT end to end electric ship model is being developed to study competing electric ship designs. This project produced a model of a Power Conversion Module (PCM)- 4, DC-to-DC converter which interfaces with the MIT ...

  19. Reliability Assessment of Fault-Tolerant Dc-Dc Converters for Photovoltaic Applications

    E-Print Network [OSTI]

    Liberzon, Daniel

    Reliability Assessment of Fault-Tolerant Dc-Dc Converters for Photovoltaic Applications Sairaj V in photovoltaic energy processing applications is presented. The proposed approach acknowledges the influence through several case studies. Index Terms-- Markov reliability modeling, photovoltaic systems, power

  20. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    resistance heating and incandescent lighting, the technologyresistance heating or by DC-favoring heat pump technology (technology (electronic fluorescent and LED). Similarly, heating

  1. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    48V DC , depending on battery bank configuration. Lifetime:Characteristics: Lead-acid battery banks are composed ofto produce the desired battery bank voltage. Typical battery

  2. The capacitively coupled converter (Cł) for high power DC-DC conversion 

    E-Print Network [OSTI]

    Khan, Shahriar

    1992-01-01T23:59:59.000Z

    THE CAPACITIVELY COUPLED CONVERTER (C3) FOR HIGH POWER DC-DC CONVERSION A Thesis by SHAHRIAR KHAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE May 1992 Major Subject: Electrical Engineering THE CAPACITIVELY COUPLED CONVERTER (Cs) FOR HIGH POWER DC-DC CONVERSION A Thesis by SHAHRIAR KHAN Approved as to style and content by: Mehrdad Ehsani (Chair of Committee) Prasad Enjeti...

  3. Digitally Controlled Distributed Multiphase DC-DC Converters Xu Zhang, Luca Corradini and Dragan Maksimovic

    E-Print Network [OSTI]

    Digitally Controlled Distributed Multiphase DC-DC Converters Xu Zhang, Luca Corradini and Dragan, corradin, maksimov}@colorado.edu Abstract -- This paper describes a distributed master-slave multiphase DC V-to-12 V input, 1.3 V, 20 A output two-phase synchronous buck converter. Index Terms-- Multiphase

  4. DC-based magnetic field controller

    DOE Patents [OSTI]

    Kotter, D.K.; Rankin, R.A.; Morgan, J.P.

    1994-05-31T23:59:59.000Z

    A magnetic field controller is described for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a Hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage. 1 fig.

  5. DC-based magnetic field controller

    DOE Patents [OSTI]

    Kotter, Dale K. (Shelley, ID); Rankin, Richard A. (Ammon, ID); Morgan, John P,. (Idaho Falls, ID)

    1994-01-01T23:59:59.000Z

    A magnetic field controller for laboratory devices and in particular to dc operated magnetic field controllers for mass spectrometers, comprising a dc power supply in combination with improvements to a hall probe subsystem, display subsystem, preamplifier, field control subsystem, and an output stage.

  6. High voltage DC power supply

    DOE Patents [OSTI]

    Droege, Thomas F. (Batavia, IL)

    1989-01-01T23:59:59.000Z

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively.

  7. High voltage DC power supply

    DOE Patents [OSTI]

    Droege, T.F.

    1989-12-19T23:59:59.000Z

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively. 7 figs.

  8. AVTA: Battery Testing - DC Fast Charging's Effects on PEV Batteries...

    Energy Savers [EERE]

    DC Fast Charging's Effects on PEV Batteries AVTA: Battery Testing - DC Fast Charging's Effects on PEV Batteries The Vehicle Technologies Office's Advanced Vehicle Testing Activity...

  9. Vehicle Technologies Office Merit Review 2014: DC Fast Charging...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DC Fast Charging Effects on Battery Life and EVSE Efficiency and Security Testing Vehicle Technologies Office Merit Review 2014: DC Fast Charging Effects on Battery Life and EVSE...

  10. Recovery Act: Integrated DC-DC Conversion for Energy-Efficient Multicore Processors

    SciTech Connect (OSTI)

    Shepard, Kenneth L

    2013-03-31T23:59:59.000Z

    In this project, we have developed the use of thin-film magnetic materials to improve in energy efficiency of digital computing applications by enabling integrated dc-dc power conversion and management with on-chip power inductors. Integrated voltage regulators also enables fine-grained power management, by providing dynamic scaling of the supply voltage in concert with the clock frequency of synchronous logic to throttle power consumption at periods of low computational demand. The voltage converter generates lower output voltages during periods of low computational performance requirements and higher output voltages during periods of high computational performance requirements. Implementation of integrated power conversion requires high-capacity energy storage devices, which are generally not available in traditional semiconductor processes. We achieve this with integration of thin-film magnetic materials into a conventional complementary metal-oxide-semiconductor (CMOS) process for high-quality on-chip power inductors. This project includes a body of work conducted to develop integrated switch-mode voltage regulators with thin-film magnetic power inductors. Soft-magnetic materials and inductor topologies are selected and optimized, with intent to maximize efficiency and current density of the integrated regulators. A custom integrated circuit (IC) is designed and fabricated in 45-nm CMOS silicon-on-insulator (SOI) to provide the control system and power-train necessary to drive the power inductors, in addition to providing a digital load for the converter. A silicon interposer is designed and fabricated in collaboration with IBM Research to integrate custom power inductors by chip stacking with the 45-nm CMOS integrated circuit, enabling power conversion with current density greater than 10A/mm2. The concepts and designs developed from this work enable significant improvements in performance-per-watt of future microprocessors in servers, desktops, and mobile devices. These new approaches to scaled voltage regulation for computing devices also promise significant impact on electricity consumption in the United States and abroad by improving the efficiency of all computational platforms. In 2006, servers and datacenters in the United States consumed an estimated 61 billion kWh or about 1.5% of the nation's total energy consumption. Federal Government servers and data centers alone accounted for about 10 billion kWh, for a total annual energy cost of about $450 million. Based upon market growth and efficiency trends, estimates place current server and datacenter power consumption at nearly 85 billion kWh in the US and at almost 280 billion kWh worldwide. Similar estimates place national desktop, mobile and portable computing at 80 billion kWh combined. While national electricity utilization for computation amounts to only 4% of current usage, it is growing at a rate of about 10% a year with volume servers representing one of the largest growth segments due to the increasing utilization of cloud-based services. The percentage of power that is consumed by the processor in a server varies but can be as much as 30% of the total power utilization, with an additional 50% associated with heat removal. The approaches considered here should allow energy efficiency gains as high as 30% in processors for all computing platforms, from high-end servers to smart phones, resulting in a direct annual energy savings of almost 15 billion kWh nationally, and 50 billion kWh globally. The work developed here is being commercialized by the start-up venture, Ferric Semiconductor, which has already secured two Phase I SBIR grants to bring these technologies to the marketplace.

  11. The economics of cell phone reuse and recycling

    E-Print Network [OSTI]

    Geyer, Roland; Doctori Blass, Vered

    2010-01-01T23:59:59.000Z

    helps us understand the business models and drivers as welldiscusses the resulting business model of cell phone take-there are viable business models around both activities. In

  12. Lightweight social communication using visual media and mobile phones

    E-Print Network [OSTI]

    Cowan, Lisa G.

    2011-01-01T23:59:59.000Z

    comfortable handing their personal device over to anotherThese ubiquitous, personal devices have the capability tothe mobile phone is a personal device, it is possible that

  13. A Case for Leveraging 802.11p for Direct Phone-to-Phone Communications

    E-Print Network [OSTI]

    Choi, Pilsoon

    WiFi cannot effectively handle the demands of device-to-device communication between phones, due to insufficient range and poor reliability. We make the case for using IEEE 802.11p DSRC instead, which has been adopted for ...

  14. DC High School Science Bowl Regionals

    Broader source: Energy.gov [DOE]

    This event is the Washington, D.C. High School Regional competition for the US National Science Bowl. The regional competition is run by the Office of Economic Impact and Diversity, and the...

  15. DC readout experiment in Enhanced LIGO

    E-Print Network [OSTI]

    Fricke, Tobin T

    The two 4 km long gravitational wave detectors operated by the Laser Interferometer Gravitational-wave Observatory (LIGO) were modified in 2008 to read out the gravitational wave channel using the DC readout form of homodyne ...

  16. Catalog of DC Appliances and Power Systems

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    www.lunera.com/. Nextek Power Systems. [cited 2010 Dec];data_files/. DC Power Systems. Wholesale Price List. [citedDUS103927W.pdf. Princeton Power Systems. GTIB-480-100 Grid-

  17. Property:PhoneNumber | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form History Facebook icon Twitter iconNumOfPlants JumpPhoneNumber Jump to:

  18. American Institute of Aeronautics and Astronautics Active System Identification of a DC-DC Converter Using

    E-Print Network [OSTI]

    American Institute of Aeronautics and Astronautics 1 Active System Identification of a DC and Computer Engineering, UCB 425. #12;American Institute of Aeronautics and Astronautics 2 analysis10

  19. Federal Government Congressional Budget Office, Budget Analysis Division Washington, DC

    E-Print Network [OSTI]

    Shyy, Wei

    Charlotte, NC Gallaher Kazakhstan, Security & Brand Integrity Almaty Oblast, Kazakhstan GMMB Washington, DC

  20. Hydrogen Storage Systems Analysis Working Group Meeting Argonne DC Offices

    E-Print Network [OSTI]

    Hydrogen Storage Systems Analysis Working Group Meeting Argonne DC Offices L'Enfant Plaza, Washington, DC December 4, 2007 SUMMARY REPORT Compiled by Romesh Kumar Argonne National Laboratory Working Group Meeting December 4, 2007 Argonne DC Offices, L'Enfant Plaza, Washington, DC Meeting

  1. Near Time-Optimal Transient Response in DC-DC Buck Converters Taking into Account the Inductor Current Limit

    E-Print Network [OSTI]

    -load transient responses [1-15]. In its simplest form, the TOC responds to a step load change with a singleNear Time-Optimal Transient Response in DC-DC Buck Converters Taking into Account the Inductor transient response of a DC-DC buck converter. The concept of current- limited, time-optimal control (CL

  2. Phase-Shifted Full Bridge DC-DC Converter with Energy Recovery Clamp and Reduced Circulating Current

    E-Print Network [OSTI]

    of the switch conduction and turn-off losses achieved by an energy recovery secondary clamp circuit an improved PSFB DC-DC converter using only a modified energy recovery clamp circuit attached at the secondaryPhase-Shifted Full Bridge DC-DC Converter with Energy Recovery Clamp and Reduced Circulating

  3. MOBILE PHONE USE AND TEMPORAL SKIN HEAT SENSATION

    E-Print Network [OSTI]

    Boyer, Edmond

    in the phone by the battery currents and running of the radiofrequency (RF) electronic circuits measured the temperature of the temporal skin due to GSM 1800 MHz MP radiated power (125 mW). We suppressed of the heat produced in the phone by the battery currents and running of the radiofrequency (RF) electronic

  4. Eye-Gaze Interaction for Mobile Phones Heiko Drewes

    E-Print Network [OSTI]

    Eye-Gaze Interaction for Mobile Phones Heiko Drewes Media Informatics Group Amalienstr. 17, 80333 the use of eye-gaze tracking technology for mobile phones. In particular we investigate how gaze interaction can be used to control applications on handheld devices. In contrast to eye-tracking systems

  5. The Dark Side of Mobile Phones August 3, 2010

    E-Print Network [OSTI]

    Carlini, David

    is convenient, but often makes for a poor nutritional choice. Deep-water rigs increase the world's access to oil, using cross-cultural data. To situate the study within the larger field of mobile phone research, we begin with a brief overview of mobile telephony in historical and social context. Mobile Phones

  6. The iPhone Goes Downstream: Mandatory Universal Distribution

    E-Print Network [OSTI]

    Silver, Whendee

    The iPhone Goes Downstream: Mandatory Universal Distribution Larry S. Karp Jeffrey M. Perloff February 2010 Abstract Apple's decision to market iPhones using a single downstream vendor has prompted vendors. We show that an upstream monopoly might want to use one or more downstream vendors, and society

  7. The iPhone Goes Downstream: Mandatory Universal Distribution

    E-Print Network [OSTI]

    Karp, Larry S.

    The iPhone Goes Downstream: Mandatory Universal Distribution Larry S. Karp Jeffrey M. Perloff December 2011 Abstract Apple's original decision to market iPhones using a single downstream vendor prompted calls for mandatory universal distribution (MUD), whereby all downstream vendors would sell the i

  8. A DC-DC Converter-Based PEM Fuel Cell System Emulator

    E-Print Network [OSTI]

    Boyer, Edmond

    power supplies. Fuel cell systems are characterized by high costs and complex auxiliary devices still impose some drawbacks: the cost of fuel cell system tests are expensive (e.g., hydrogenA DC-DC Converter-Based PEM Fuel Cell System Emulator Daoud Rezzak, Farid Khoucha, Mohamed

  9. DC's Marble ceiling : urban height and its regulation in Washington, DC

    E-Print Network [OSTI]

    Trueblood, Andrew Tyson

    2009-01-01T23:59:59.000Z

    Washington, DC has a unique urban form that is the result of a century-old law. Through the narrow lens of DC's height limit, I survey a range of topics related to urban height, starting with a review of its history of ...

  10. Wide input range DC-DC converter with digital control scheme

    E-Print Network [OSTI]

    Harfman Todorovic, Maja

    2006-04-12T23:59:59.000Z

    In this thesis analysis and design of a wide input range DC-DC converter is proposed along with a robust power control scheme. The proposed converter and its control is designed to be compatible to a fuel cell power source, which exhibits 2...

  11. Cont. Rot. Rot. DC Cont. Rot. Rot. DC Cont. Rot. Rot. DC Corn Corn Beans Wheat Beans Corn Corn Beans Wheat Beans Corn Corn Beans Wheat Beans

    E-Print Network [OSTI]

    Jackson, Scott A.

    Cont. Rot. Rot. DC Cont. Rot. Rot. DC Cont. Rot. Rot. DC Corn Corn Beans Wheat Beans Corn Corn Beans Wheat Beans Corn Corn Beans Wheat Beans Expected yield per acre2 118 126 39 62 23 149 158 49 70 29

  12. Cont. Rot. Rot. DC Cont. Rot. Rot. DC Cont. Rot. Rot. DC Corn Corn Beans Wheat Beans Corn Corn Beans Wheat Beans Corn Corn Beans Wheat Beans

    E-Print Network [OSTI]

    Cont. Rot. Rot. DC Cont. Rot. Rot. DC Cont. Rot. Rot. DC Corn Corn Beans Wheat Beans Corn Corn Beans Wheat Beans Corn Corn Beans Wheat Beans Expected yield per acre2 119 127 39 62 23 149 159 49 70 29

  13. New Experimental Data in DC745U

    SciTech Connect (OSTI)

    Ortiz-Acosta, Denisse [Los Alamos National Laboratory; Cady, Carl [Los Alamos National Laboratory; Densmore, Crystal [Los Alamos National Laboratory

    2012-06-18T23:59:59.000Z

    The objectives of this project are: (1) study the molecular and mechanical properties of DC745U - (a) DC745U is a silicone elastomer used in several weapons systems, (b) depending on their chemistry and formulation, polymers can be susceptible to damage and failures due to weak chemical linkages and physical interactions, (c) inefficient production processes can generate heterogeneities throughout the material that can contribute negatively to the overall performance and lifetime of the polyer, (d) aging, long-term thermal and radioactive conditions, and mechanical strains can affect the materials network structure and contribute to the degradation of the production; (2) characterization of DC745U materials cured under different conditions to determine possible differences to the polymer structure; and (3) this work is relevant to mission-critical programs and for supporting programmatic work for weapon research.

  14. Thermoelectric DC conductivities from black hole horizons

    E-Print Network [OSTI]

    Aristomenis Donos; Jerome P. Gauntlett

    2014-10-14T23:59:59.000Z

    An analytic expression for the DC electrical conductivity in terms of black hole horizon data was recently obtained for a class of holographic black holes exhibiting momentum dissipation. We generalise this result to obtain analogous expressions for the DC thermoelectric and thermal conductivities. We illustrate our results using some holographic Q-lattice black holes as well as for some black holes with linear massless axions, in both $D=4$ and $D=5$ bulk spacetime dimensions, which include both spatially isotropic and anisotropic examples. We show that some recently constructed ground states of holographic Q-lattices, which can be either electrically insulating or metallic, are all thermal insulators.

  15. Design and analysis of a zero-voltage switching scheme for a dc- to-dc converter

    E-Print Network [OSTI]

    Arun, G.

    1992-01-01T23:59:59.000Z

    5S 59 VITA . 65 I. IST OF FICI;RES FIGURE Page Linear versus switch-mode power convers&on Components of a switch-mode dc-to-dc converter 3 A typical dc-to-dc converter system Basic buck converter Basic boost converter Basic buck...-boost converter 7 One leg of a, dc-to-dc converter. Turn-on and turn-off scenartos in switch-mode operation. 16 10 Switching loci in the ur ? ir plane. Circuit for. zero-voltage sw&tching. . Mode 1 17 90 Mode? Mode I Mode 5 oo 93 Typical voltage...

  16. achyrocline satureioides dc: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and DC, microgrid, with its definition as a local grid that comprises distributed generation, energy storage systems to the frequency in the AC bulk grid, the DC voltage in the...

  17. DC Students Flex Their Mental Muscles in Regional Science Bowl...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DC Students Flex Their Mental Muscles in Regional Science Bowl Competition DC Students Flex Their Mental Muscles in Regional Science Bowl Competition February 23, 2015 - 3:12pm...

  18. A Cognitive Phased Array Using Smart Phone Control

    E-Print Network [OSTI]

    Jensen, Jeffrey

    2012-07-16T23:59:59.000Z

    Cognitive radio networks require the use of computational resources to reconfigure transmit/receive parameters to improve communication quality of service or efficiency. Recent emergence of smart phones has made these resources more accessible...

  19. Phone: 817-272-3381 Fax: 817-272-5190

    E-Print Network [OSTI]

    Texas at Arlington, University of

    and waste 3. Propane tanks 4. Discarded over the counter cold medicines 5. Anti-freeze containers 6. Drain, Texas 76019 Phone: 817-272-3381 Fax: 817-272-5190 Meth Labs Stash House Indicators Drug Distribution

  20. The economics of cell phone reuse and recycling

    E-Print Network [OSTI]

    Geyer, Roland; Doctori Blass, Vered

    2010-01-01T23:59:59.000Z

    for the disposal of WEEE. EngD Thesis, Centre forphones in the context of WEEE. Proceedings of Going Greena by-product of reuse. Keywords WEEE . Cell phones . Reuse .

  1. Understanding energy consumption of sensor enabled applications on mobile phones

    E-Print Network [OSTI]

    Hartman

    Recent research in ubiquitous and mobile computing uses mobile phones and wearable accelerometers to monitor individuals' physical activities for personalized and proactive health care. The goal of this project is to measure ...

  2. Halbach array DC motor/generator

    DOE Patents [OSTI]

    Merritt, Bernard T. (Livermore, CA); Dreifuerst, Gary R. (Livermore, CA); Post, Richard F. (Walnut Creek, CA)

    1998-01-01T23:59:59.000Z

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An "inside-out" design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then "switched" or "commutated" to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives.

  3. Halbach array DC motor/generator

    DOE Patents [OSTI]

    Merritt, B.T.; Dreifuerst, G.R.; Post, R.F.

    1998-01-06T23:59:59.000Z

    A new configuration of DC motor/generator is based on a Halbach array of permanent magnets. This motor does not use ferrous materials so that the only losses are winding losses and losses due to bearings and windage. An ``inside-out`` design is used as compared to a conventional motor/generator design. The rotating portion, i.e., the rotor, is on the outside of the machine. The stationary portion, i.e., the stator, is formed by the inside of the machine. The rotor contains an array of permanent magnets that provide a uniform field. The windings of the motor are placed in or on the stator. The stator windings are then ``switched`` or ``commutated`` to provide a DC motor/generator much the same as in a conventional DC motor. The commutation can be performed by mechanical means using brushes or by electronic means using switching circuits. The invention is useful in electric vehicles and adjustable speed DC drives. 17 figs.

  4. FEDERAL COMMUNICATIONS COMMISSION Washington, DC 20554

    E-Print Network [OSTI]

    Bove Jr., V. Michael

    FCC 96­207 Before the FEDERAL COMMUNICATIONS COMMISSION Washington, DC 20554 In the Matter to the advancement of digital television and related technologies by the Federal Communications Commission, its 617­253­0334, fax 617­258­6264 vmb@media.mit.edu #12; EXECUTIVE SUMMARY The Federal Communications

  5. Energy Training Session for DC Elementary School Teachers

    Broader source: Energy.gov [DOE]

    Are you an elementary school teacher in Washington, DC, looking for creative ideas to introduce energy curriculum to your students?

  6. Modeling Microinverters and DC Power Optimizers in PVWatts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Available for sale to the public, in paper, from: U.S. Department of Commerce National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 phone:...

  7. Aalborg Universitet Hierarchical Control for Multiple DC Microgrids Clusters

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Hierarchical Control for Multiple DC Microgrids Clusters Shafiee, Qobad Control for Multiple DC Microgrids Clusters. I E E E Transactions on Energy Conversion. General rights, J. C. Vasquez, and J. M. Guerrero, "Hierarchical Control for Multiple DC-Microgrids Clusters," IEEE

  8. Transportation YOU 2013 DC Youth Summit WTS Transportation YOU

    E-Print Network [OSTI]

    Minnesota, University of

    Transportation YOU 2013 DC Youth Summit WTS Transportation YOU CTS Research Conference May 21, 2014 Lisa Rasmussen, WTS / Kimley-Horn and Associates, Inc #12;Transportation YOU 2013 DC Youth SummitTransportation YOU 2013 DC Youth Summit Agenda What is Transportation YOU? Transportation YOU ­ WTS Local Chapter

  9. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    D.C. Water Resources Research Center Annual Technical Report FY 2007 D.C. Water Resources Research of the District of Columbia (DC) Water Resources Research Institute (the Institute) for the period of March 1 relevant water resources research results and transfer information to assist policy makers and residents

  10. Low Power DC-DC Converters and a Low Quiescent Power High PSRR Class-D Audio Amplifier

    E-Print Network [OSTI]

    Torres, Joselyn

    2013-12-03T23:59:59.000Z

    High-performance DC-DC voltage converters and high-efficient class-D audio amplifiers are required to extend battery life and reduce cost in portable electronics. This dissertation focuses on new system architectures and design techniques...

  11. Low Power DC-DC Converters and a Low Quiescent Power High PSRR Class-D Audio Amplifier 

    E-Print Network [OSTI]

    Torres, Joselyn

    2013-12-03T23:59:59.000Z

    High-performance DC-DC voltage converters and high-efficient class-D audio amplifiers are required to extend battery life and reduce cost in portable electronics. This dissertation focuses on new system architectures and design techniques...

  12. New leading/trailing edge modulation strategies for two-stage AC/DC PFC adapters to reduce DC-link capacitor ripple current 

    E-Print Network [OSTI]

    Sun, Jing

    2007-09-17T23:59:59.000Z

    AC/DC adapters mostly employ two-stage topology: Power Factor Correction (PFC) pre-regulation stage followed by an isolated DC/DC converter stage. Low power AC/DC adapters require a small size to be competitive. Among their components, the bulk DC...

  13. DC side filters for multiterminal HVDC systems

    SciTech Connect (OSTI)

    Shore, N.L.; Adamson, K.; Bard, P. [and others] [and others

    1996-10-01T23:59:59.000Z

    Multiterminal HVDC systems present challenges in the specification and design of suitable dc side filtering. This document examines the existing experience and addresses the particular technical problems posed by multiterminal systems. The filtering requirements of small taps are discussed, as is the potential use of active filters. Aspects of calculation and design are considered and recommendations made to guide the planners and designers of future multiterminal schemes.

  14. Using Mobile Phone Data for Electricity Infrastructure Planning

    E-Print Network [OSTI]

    Martinez-Cesena, Eduardo Alejandro; Ndiaye, Mamadou; Schläpfer, Markus

    2015-01-01T23:59:59.000Z

    Detailed knowledge of the energy needs at relatively high spatial and temporal resolution is crucial for the electricity infrastructure planning of a region. However, such information is typically limited by the scarcity of data on human activities, in particular in developing countries where electrification of rural areas is sought. The analysis of society-wide mobile phone records has recently proven to offer unprecedented insights into the spatio-temporal distribution of people, but this information has never been used to support electrification planning strategies anywhere and for rural areas in developing countries in particular. The aim of this project is the assessment of the contribution of mobile phone data for the development of bottom-up energy demand models, in order to enhance energy planning studies and existing electrification practices. More specifically, this work introduces a framework that combines mobile phone data analysis, socioeconomic and geo-referenced data analysis, and state-of-the-...

  15. A High Power Density DC-DC Converter for Distributed PV Architectures

    SciTech Connect (OSTI)

    Mohammed S. Agamy; Song Chi; Ahmed Elasser; Maja Harfman-Todorovic; Yan Jiang; Frank Mueller; Fengfeng Tao

    2012-06-01T23:59:59.000Z

    In order to maximize solar energy harvesting capabilities, power converters have to be designed for high efficiency and good MPPT and voltage/current performance. When many converters are used in distributed systems, power density also becomes an important factor as it allows for simpler system integration. In this paper a high power density string dc-dc converter suitable for distributed medium to large scale PV installation is presented. A simple partial power processing topology, implemented with all silicon carbide devices provides high efficiency as well as high power density. A 3.5kW, 100kHz converter is designed and tested to verify the proposed methods.

  16. DC-DC Converter Topology Assessment for Large Scale Distributed Photovoltaic Plant Architectures

    SciTech Connect (OSTI)

    Mohammed S. Agamy; Maja Harfman-Todorovic; Ahmed Elasser; Juan A. Sabate; Robert L. Steigerwald; Yan Jiang; Somasundaram Essakiappan

    2011-07-01T23:59:59.000Z

    Distributed photovoltaic (PV) plant architectures are emerging as a replacement for the classical central inverter based systems. However, power converters of smaller ratings may have a negative impact on system efficiency, reliability and cost. Therefore, it is necessary to design converters with very high efficiency and simpler topologies in order not to offset the benefits gained by using distributed PV systems. In this paper an evaluation of the selection criteria for dc-dc converters for distributed PV systems is performed; this evaluation includes efficiency, simplicity of design, reliability and cost. Based on this evaluation, recommendations can be made as to which class of converters is best fit for this application.

  17. Property:RAPID/Contact/ID7/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation,ID2/PhoneID7/Phone" Showing 2

  18. A comparison of phone and grapheme-based spoken term detection 

    E-Print Network [OSTI]

    Wang, Dong; Frankel, Joe; Tejedor, Javier; King, Simon

    2008-01-01T23:59:59.000Z

    text corpora. We present experiments on Spanish and English data, comparing phone and grapheme-based STD. For Spanish, where phone and grapheme-based systems give similar transcription word error rates (WERs), grapheme-based STD significantly...

  19. *Name: Date of Birth: Banner/Student ID # Social Security # Phone: Cell

    E-Print Network [OSTI]

    Gering, Jon C.

    Transmitted Infection Anemia Eye Disease (excluding glasses) Joint Disease/Injury Sickle Cell Trait*Name: Date of Birth: Banner/Student ID # Social Security # Phone: Cell Permanent Address: Home Age, contact: Name Relationship: Phone: Day____________________ Eve____________________ Cell

  20. Raman P. Singh School of Mechanical and Aerospace Engineering Phone (Tulsa): 918.594.8155

    E-Print Network [OSTI]

    Ghajar, Afshin J.

    Raman P. Singh School of Mechanical and Aerospace Engineering Phone (Tulsa): 918.594.8155 Oklahoma State University Phone (Stillwater): 405.744.1825 700 N. Greenwood Avenue, Tulsa, OK 74106 raman

  1. DC Breakdown Experiments with Iridium Cathode

    E-Print Network [OSTI]

    Profatilova, Iaroslava; Korsback, Anders; Muranaka, Tomoko; Wuensch, Walter

    2015-01-01T23:59:59.000Z

    Electrical breakdown occurring in rf accelerating structures is one of the major disruptions of the accelerated beam in CLIC. At CERN, as complements to rf facilities, DC-spark systems have been used to study breakdown properties of many candidate materials for making rf components. In this note, measurements of conditioning speed, breakdown field and field enhancement factor of iridium are presented comparing with previously tested materials. The average breakdown field after conditioning reached 238 MV/m, which places iridium next to copper. By comparison with results and properties of other metals, the low breakdown field of iridium could be explained by its face-centred-cubic crystal structure.

  2. DC Survey 2013 | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management Fermi Site OfficeCoursePublicCurrentCurtis110 1 ofDC

  3. User:Dc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri Global Energy LLCEnergy) RedirectCwebber Jump to: navigation,DbowersDc

  4. Dc's blog | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE Facility Database DataDatatechnicNew Jersey: Energy ResourcesDc's blog Home

  5. Washington DC | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin BaxinUmweltVillageGraph HomeWarana Group of CooperativesDC Home

  6. XL-DC/Mark V Options You can customize the XL-DC and Mark V

    E-Print Network [OSTI]

    Berns, Hans-Gerd

    administrator with the NTP Time Server Protocol, network status, and statistics. This feature implements SNMP. XL-DC Mark V Network Time Server Telecommunications Interface Frequency Measurement STD Time Interface Low Phase Noise Output Network Interface Loss of Lock Alarm STD Programmable Pulse Output

  7. A Reachability-Based Method for Large-Signal Behavior Verification of DC-DC Converters

    E-Print Network [OSTI]

    Liberzon, Daniel

    -loop, large-signal system behavior verification, and iv) switching detail modeling. In open-loop, large´inguez-Garc´ia, Member, IEEE Abstract--A method for large-signal behavior verification of power electronics DC behavior verification, lengthy time-domain simula- tions are conducted to analyze the system response

  8. Development of a 55 kW 3X DC-DC Converter for HEV Systems

    E-Print Network [OSTI]

    Tolbert, Leon M.

    converter and a traction motor to drive the vehicle. In most commercial HEV systems, the power converter one of the hottest parts in the system. Hence, with the trend of higher coolant temperatures, those-dc converter and the continuous control of the modulation index of the inverter, it is sufficient to operate

  9. Energy Challenge Two: The WeatherizeDC Campaign | Department...

    Broader source: Energy.gov (indexed) [DOE]

    economic and environmental justice by creating clean energy career opportunities for people who need them most. The DC Project applies cutting-edge organizing tools and tactics...

  10. assisted dc magnetron: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    resistivity exceeding 1020 .cm 2. However, native defects (most Mekki, Abdelkarim 23 Optimization of DC reactive magnetron sputtering deposition process for efficient YSZ...

  11. DC Bus Capacitor Manufacturing Facility for Electric Drive Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. apearravt028boan2010...

  12. average current dc: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ??Permanent magnet Brushless DC motor drives are being employed in newlinemany variable speed applications due to their high efficiency, silent operation, newlinecompact size,...

  13. ac to dc converters: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to use solid state Inverters(DC to AC converters) to have a variable voltage, fixed or variable frequency power source available for industrial applications. With advancements...

  14. PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PHOTOVOLTAIC DC ARC FAULT DETECTOR TESTING AT SANDIA NATIONAL LABORATORIES Jay Johnson 1 , Birger Pahl 2 , Charles Luebke 2 , Tom Pier 2 , Theodore Miller 3 , Jason Strauch 1 ,...

  15. Identifying semiconductors by d.c. ionization conductivity

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    expected from high-Z semiconductor detectors? ,” IEEE Transand binary compound semiconductors and insulators,” J PhysIdentifying Semiconductors by D.C. Ionization Conductivity

  16. DC Resistivity Survey (Wenner Array) At Mt Princeton Hot Springs...

    Open Energy Info (EERE)

    2008 - 2010 Usefulness useful DOE-funding Unknown Exploration Basis Determination of groundwater flux patterns Notes Researchers measured DC resistivity and produced 12 resistivity...

  17. Defending Mobile Phones from Proximity Malware Gjergji Zyba, Geoffrey M. Voelker

    E-Print Network [OSTI]

    Technology La Jolla, CA, USA pjohansson@soe.ucsd.edu Abstract--As mobile phones increasingly becomeDefending Mobile Phones from Proximity Malware Gjergji Zyba, Geoffrey M. Voelker Department propagate in an entirely distributed fashion. In this paper we consider the dynamics of mobile phone malware

  18. Smart Phones for the Elders: Boosting the Intelligence of Smart Homes

    E-Print Network [OSTI]

    Helal, Abdelsalam

    Smart Phones for the Elders: Boosting the Intelligence of Smart Homes William Mann, OTR, Ph that adopts the emerging smart phones technology as an effective booster of the utility of smart homes, warnings and calls for help. We also present our smart phone/home architecture and describe our efforts

  19. Transportation Mode Detection using Mobile Phones and GIS Information

    E-Print Network [OSTI]

    Wolfson, Ouri E.

    Transportation Mode Detection using Mobile Phones and GIS Information Leon Stenneth, Ouri Wolfson, Chicago, IL 60607-7053 {lstennet, wolfson, psyu, boxu} @cs.uic.edu ABSTRACT The transportation mode. In this paper, we propose an approach to inferring a user's mode of transportation based on the GPS sensor

  20. Mobile phone-induced honeybee worker piping Daniel FAVRE

    E-Print Network [OSTI]

    waves originating from mobile phones were tested for potential effects on honeybee behavior. Mobile Honeybees are essential partners for the success of agriculture. The economical role of honeybees, pollen or nectar dearth), drought, monocultural practices, migratory stress (brought about by the moving

  1. Scan with your phone for a mobile campus map.

    E-Print Network [OSTI]

    Noble, William Stafford

    Scan with your phone for a mobile campus map. Drumheller Fountain Portage Bay Lake Washington Ship Meany Schmitz Hansee Haggett North Physics Laboratory Portage Bay Parking Facility Odegaard Undergrad South Experimental Education Unit PortageBayBuilding South Cam pus Center OceanTch. M arine Sciences

  2. Towards Socially Aware Mobile Phones Alessandra Toninelli1

    E-Print Network [OSTI]

    Madiraju, Praveen

    based on Semantic Web technologies. 1 Introduction Social bindings characterize each individual's life of other individuals within the framework of a so-called social network. Technology advances in portable useless interruptions and possible socially embarrassing situations. The mobile phone has great potential

  3. IEEE Communications Magazine July 2002108 Standardization of Mobile Phone

    E-Print Network [OSTI]

    Han, Richard Y.

    -FLT. INTRODUCTION The U.S. Federal Communications Commission (FCC) has made Emergency 911 (E911) a mandatoryIEEE Communications Magazine · July 2002108 Standardization of Mobile Phone Positioning for 3G of the important features of the 3G mobile communication system. Many valuable location- based services can

  4. Design and analysis of a zero-voltage switching scheme for a dc- to-dc converter 

    E-Print Network [OSTI]

    Arun, G.

    1992-01-01T23:59:59.000Z

    DESIGN AND ANALYSIS OF A ZERO-VOLTAGE SSVITCHING SCFIE'. tIE FOR A DC-TO-DC CONVERTER A Thesis by G. ARUN Submitted to the Office of Graduate Studies of Texas ARM 1. niversity in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1992 Major Subject: Electrical Engineering DESIGN AND ANALYSIS OE A ZERO-VOLTAGE SWITCHING SCHEME I'OR A DC-TO-DC CONVERTER A Thesis by G. AR(tN Approved as to style and content by: P. Enjeti (Chair of Cornrnitteel C...

  5. SoC Energy Savings = Reduce+Reuse+Recycle: A Case Study Using a 660MHz DC-DC Converter with Integrated Output Filter

    E-Print Network [OSTI]

    Lemieux, Guy

    SoC Energy Savings = Reduce+Reuse+Recycle: A Case Study Using a 660MHz DC-DC Converter, mehdia, samad, prp, shahriar } @ ece.ubc.ca Abstract ­ This paper advocates `reduce, reuse, recycle to emphasize reuse and recycling as well. We design a DC-DC buck converter to demonstrate the 3 techniques

  6. Dynamic microscopic theory of fusion using DC-TDHF

    SciTech Connect (OSTI)

    Umar, A. S.; Oberacker, V. E.; Keser, R.; Maruhn, J. A.; Reinhard, P.-G. [Department of Physics and Astronomy, Vanderbilt University, Nashville, Tennessee 37235 (United States); RTE University, Science and Arts Faculty, Department of Physics, 53100, Rize (Turkey); Institut fuer Theoretische Physik, Goethe-Universitaet, D-60438 Frankfurt am Main (Germany); Institut fur Theoretische Physik, Universitat Erlangen, D-91054 Erlangen (Germany)

    2012-10-20T23:59:59.000Z

    The density-constrained time-dependent Hartree-Fock (DC-TDHF) theory is a fully microscopic approach for calculating heavy-ion interaction potentials and fusion cross sections below and above the fusion barrier. We discuss recent applications of DC-TDHF method to fusion of light and heavy systems.

  7. ELECTROMAGNETIC RADIATION FROM A STRONG DC ELECTRIC FIELD

    E-Print Network [OSTI]

    Guedel, Manuel

    ELECTROMAGNETIC RADIATION FROM A STRONG DC ELECTRIC FIELD Manuel G¨udel 1 and Donat G. Wentzel 2 1 accelerated by a strong dc electric field show not only very efficient generation of beam waves but also emission of o­mode radiation. We present a set of particle simulations for which we study the behavior

  8. Read-out electronics for DC squid magnetic measurements

    DOE Patents [OSTI]

    Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

    2002-01-01T23:59:59.000Z

    Read-out electronics for DC SQUID sensor systems, the read-out electronics incorporating low Johnson noise radio-frequency flux-locked loop circuitry and digital signal processing algorithms in order to improve upon the prior art by a factor of at least ten, thereby alleviating problems caused by magnetic interference when operating DC SQUID sensor systems in magnetically unshielded environments.

  9. National Small Business Federal Contracting Summit-DC Fall Conference

    Broader source: Energy.gov [DOE]

    The 2014 National Small Business Federal Contracting Summit - DC Fall Conference is presented jointly by the National Association of Small Business Contractors (the Supplier Council of The American Small Business Chamber of Commerce) and the U.S. Women's Chamber of Commerce in Washington DC.

  10. Historical Material Analysis of DC745U Pressure Pads

    SciTech Connect (OSTI)

    Ortiz-Acosta, Denisse [Los Alamos National Laboratory

    2012-07-30T23:59:59.000Z

    As part of the Enhance Surveillance mission, it is the goal to provide suitable lifetime assessment of stockpile materials. This report is an accumulation of historical publication on the DC745U material and their findings. It is the intention that the B61 LEP program uses this collection of data to further develop their understanding and potential areas of study. DC745U is a commercially available silicone elastomer consisting of dimethyl, methyl-phenyl, and methyl-vinyl siloxane repeat units. Originally, this material was manufactured by Dow Corning as Silastic{reg_sign} DC745U at their manufacturing facility in Kendallville, IN. Recently, Dow Corning shifted this material to the Xiameter{reg_sign} brand product line. Currently, DC745U is available through Xiameter{reg_sign} or Dow Corning's distributor R. D. Abbott Company. DC745U is cured using 0.5 wt% vinyl-specific peroxide curing agent known as Luperox 101 or Varox DBPH-50. This silicone elastomer is used in numerous parts, including two major components (outer pressure pads and aft cap support) in the W80 and as pressure pads on the B61. DC745U is a proprietary formulation, thus Dow Corning provides limited information on its composition and properties. Based on past experience with Dow Corning, DC745U is at risk of formulation changes without notification to the costumer. A formulation change for DC745U may have a significant impact because the network structure is a key variable in determining material properties. The purpose of this report is to provide an overview of historical DC745U studies and identify gaps that need to be addressed in future work. Some of the previous studies include the following: 1. Spectroscopic characterization of raw gum stock. 2. Spectroscopic, thermal, and mechanical studies on cured DC745U. 3. Nuclear Magnetic Resonance (NMR) and solvent swelling studies on DC745U with different crosslink densities. 4. NMR, solvent swelling, thermal, and mechanical studies on thermally aged DC745U. 5. NMR, solvent swelling, thermal, and mechanical studies on radiolytically aged DC745U. Each area is reviewed and further work is suggested to improve our understanding of DC745U for systems engineering, surveillance, aging assessments, and lifetime assessment.

  11. DC, AC and advanced EV propulsion systems

    SciTech Connect (OSTI)

    O'Neil, W.

    1983-08-01T23:59:59.000Z

    Battery development and liquid fuel availability and cost are still the pacing factors in wide scale electric vehicle introduction. Propulsion systems also require technical development, however, if electric vehicles are to be acceptable in the marketplace in competition against ICE vehicles. Eaton Corporation has undertaken a program designed to identify and investigate three broad types of propulsion systems in identical test vehicles on the same test track under conditions as similar as possible. Characteristics of dc, ac and advanced systems are compared to date, and projections of anticipated results and further work are provided. The compelling advantages of multiple mechanical ratios in EV propulsion systems are reviewed. An emerging, but less obvious, advantage is higher overall system efficiency.

  12. Abstract --A systematic framework for reliability assessment and fault-tolerant design of multiphase dc-dc

    E-Print Network [OSTI]

    Liberzon, Daniel

    reliability. Index Terms--Markov reliability modeling, maximum power point tracking, photovoltaics, switch1 Abstract -- A systematic framework for reliability assessment and fault-tolerant design of multiphase dc-dc converters deployed in photovoltaic applications is presented. System-level steady

  13. 3X DC-DC Multiplier/Divider for HEV Systems Wei Qian, Fang Z. Peng, Miaosen Shen

    E-Print Network [OSTI]

    Tolbert, Leon M.

    -dc converter, this converter can have three output/input voltage ratios with smooth transition. The control motor to drive the vehicle. The power converter could be just a traditional inverter or a dc, the inductor is bulky, heavy, costly, and always one of the hottest components. With the trend of higher

  14. Annual Meeting of Energy Recovery Council, W hi DC D b 3 2011Washington DC, December 3. 2011

    E-Print Network [OSTI]

    Columbia University

    Annual Meeting of Energy Recovery Council, W hi DC D b 3 2011Washington DC, December 3. 2011 to the recyclers (e.g. metal smelters; secondary paper mills).(e.g. metal smelters; secondary paper mills). All, recovery (called WastetoEnergy; WTE) gy, , y ( gy; ) · All countries (and communities) who rely on WTE also

  15. Development of a Novel Bi-Directional Isolated Multiple-Input DC-DC Converter

    SciTech Connect (OSTI)

    Li, H.

    2005-10-24T23:59:59.000Z

    There is vital need for a compact, lightweight, and efficient energy-storage system that is both affordable and has an acceptable cycle life for the large-scale production of electric vehicles (EVs) and hybrid electric vehicles (HEVs). Most of the current research employs a battery-storage unit (BU) combined with a fuel cell (FC) stack in order to achieve the operating voltage-current point of maximum efficiency for the FC system. A system block diagram is shown in Fig.1.1. In such a conventional arrangement, the battery is sized to deliver the difference between the energy required by the traction drive and the energy supplied by the FC system. Energy requirements can increase depending on the drive cycle over which the vehicle is expected to operate. Peak-power transients result in an increase of losses and elevated temperatures which result in a decrease in the lifetime of the battery. This research will propose a novel two-input direct current (dc) dc to dc converter to interface an additional energy-storage element, an ultracapacitor (UC), which is shown in Fig.1.2. It will assist the battery during transients to reduce the peak-power requirements of the battery.

  16. Cell phone, blackberry, or other electronic device use while driving. Common sense tells us that handling and dialing cell phones while driving compromises safety,

    E-Print Network [OSTI]

    Powers, Robert

    Cell phone, blackberry, or other electronic device use while driving. Common sense tells us of electronic communication devices (navigational systems entry, cell phones including text messaging, email, or other electronic device for voice communications while the vehicle is in motion: o Use should be kept

  17. This document is the preprint version of the paper: L. Meng, T. Dragicevic, J.M. Guerrero, and J.C. Vasquez, "Stability constrained efficiency optimization for droop controlled dc-dc conversion

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    .C. Vasquez, "Stability constrained efficiency optimization for droop controlled dc-dc conversion system, Austria, Nov 2013. Stability Constrained Efficiency Optimization for Droop Controlled DC-DC Conversion a hierarchical control in a droop-controlled dc-dc conversion system with special focus on improving system

  18. Implementing the DC Mode in Cosmological Simulations with Supercomoving Variables

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Gnedin, Nickolay Y.; Kravtsov, Andrey V.; Rudd, Douglas H.

    2011-06-02T23:59:59.000Z

    As emphasized by previous studies, proper treatment of the density fluctuation on the fundamental scale of a cosmological simulation volume - the 'DC mode' - is critical for accurate modeling of spatial correlations on scales ~> 10% of simulation box size. We provide further illustration of the effects of the DC mode on the abundance of halos in small boxes and show that it is straightforward to incorporate this mode in cosmological codes that use the 'supercomoving' variables. The equations governing evolution of dark matter and baryons recast with these variables are particularly simple and include the expansion factor, and hence the effect of the DC mode, explicitly only in the Poisson equation.

  19. SPEAR3 LARGE DC MAGNET POWER SUPPLIES

    SciTech Connect (OSTI)

    de Lira, A

    2004-06-23T23:59:59.000Z

    The Stanford Synchrotron Radiation Laboratory (SSRL) has successfully commissioned SPEAR3, its newly upgraded 3-GeV synchrotron light source. First stored beam occurred December 15, 2003 and 100mA operation was reached on January 20, 2004. This paper describes the specification, design, and performance of the SPEAR3 DC magnet large power supplies (LGPS) that consist of tightly-regulated (better than {+-}10 ppm) current sources ranging from 100A to 225A and output powers ranging from 70kW to 135kW. A total of 6 LGPS are in successful operation and are used to power strings of quadrupoles and sextupoles. The LGPS are isolated by a delta/delta-wye 60Hz step-down transformer that provides power to 2 series-connected chopper stages operating phase-shifted at a switching frequency of 18-kHz to provide for fast output response and high efficiency. Also described are outside procurement aspects, installation, in-house testing, and operation of the power supplies.

  20. Greening academia: Use and disposal of mobile phones among university students

    SciTech Connect (OSTI)

    Ongondo, F.O. [School of Civil Engineering and the Environment, University of Southampton, Lanchester Building, University Rd., Highfield, SOUTHAMPTON, Hampshire SO17 1BJ (United Kingdom); Williams, I.D., E-mail: idw@soton.ac.uk [School of Civil Engineering and the Environment, University of Southampton, Lanchester Building, University Rd., Highfield, SOUTHAMPTON, Hampshire SO17 1BJ (United Kingdom)

    2011-07-15T23:59:59.000Z

    Research highlights: > Students use/disposal of mobile phones was assessed via a large-scale survey and a takeback trial. > We estimate 3.7 m phones stockpiled by UK students; 29.3 and 28.1 m stockpiled for Europe and USA. > Many students replace phones at least once a year; only a small number have used a takeback service. > Monetary incentives have greatest influence over willingness to utilise takeback services. > Universities should partner with established operators to conduct targeted takeback services. - Abstract: Mobile phones have relatively short lifecycles and are rapidly seen as obsolete by many users within little over a year. However, the reusability of these devices as well as their material composition means that in terms of mass and volume, mobile phones represent the most valuable electronic products that are currently found in large numbers in waste streams. End-of-life mobile phones are a high value (from a reuse and resource perspective), high volume (quantity), low cost (residual monetary value) and transient (short lifecycle) electronic product. There are very large numbers of higher education (mainly university) students in the world - there are >2.4 million in the UK alone, 19 million in Europe and 18.2 million in the USA - and they often replace their mobile phones several times before graduation. Thus, because of the potentially significant environmental and economic impacts, a large scale survey of students at 5 UK universities was conducted to assess the behaviour of students with regard to their use and disposal of mobile phones. Additionally, a small scale trial mobile phone takeback service at one of the universities was carried out. The findings indicate that many students replace their phones at least once a year; replacing broken phones, getting upgrades from network operators, remaining 'fashionable' and a desire to have a handset with a longer battery life are the main reasons for such rapid replacement. Almost 60% of replaced phones are not sent to reuse or recycling operations but are stockpiled by students mainly as spare/backup phones. Approximately 61% of students own an extra mobile phone with male students replacing their phones more often than females. In particular, the results highlight the potentially huge stockpile of mobile phones - and consequently valuable supplies of rare metals - being held by the public; we estimate that there are 3.7 million phones stockpiled by students in UK higher education alone (29.3 and 28.1 million stockpiled, respectively, for Europe and USA). Although many students are aware of UK mobile phone takeback services, only a moderate number have previously used the services. Students' recycling of other waste materials such as paper and glass did not have a significant impact on their disposal actions for their unwanted mobile phones, although students who often recycled these waste materials were also the most willing to participate in mobile phone takeback services. Monetary incentives such as cash payments and vouchers have the greatest influence over students' willingness to utilise takeback services, followed by convenience and ease of use of the services. The paper discusses these findings as well as the outcome of the trial mobile phone takeback. It is suggested that universities should partner with established takeback operators to conduct event-based mobile phone takeback services primarily targeting students. Lessons from mobile phone takeback applicable to takeback services for end-of-life gadgets similar to mobile phones are also discussed.

  1. Radiofrequency amplifier based on a dc superconducting quantum interference device

    DOE Patents [OSTI]

    Hilbert, Claude (Berkeley, CA); Martinis, John M. (Berkeley, CA); Clarke, John (Berkeley, CA)

    1986-01-01T23:59:59.000Z

    A low noise radiofrequency amplifier (10), using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID (11) and an input coil (12) are maintained at superconductivity temperatures in a superconducting shield (13), with the input coil (12) inductively coupled to the superconducting ring (17) of the dc SQUID (11). A radiofrequency signal from outside the shield (13) is applied to the input coil (12), and an amplified radiofrequency signal is developed across the dc SQUID ring (17) and transmitted to exteriorly of the shield (13). A power gain of 19.5.+-.0.5 dB has been achieved with a noise temperature of 1.0.+-.0.4 K. at a frequency of 100 MHz.

  2. Radiofrequency amplifier based on a dc superconducting quantum interference device

    DOE Patents [OSTI]

    Hilbert, C.; Martinis, J.M.; Clarke, J.

    1984-04-27T23:59:59.000Z

    A low noise radiofrequency amplifer, using a dc SQUID (superconducting quantum interference device) as the input amplifying element. The dc SQUID and an input coil are maintained at superconductivity temperatures in a superconducting shield, with the input coil inductively coupled to the superconducting ring of the dc SQUID. A radiofrequency signal from outside the shield is applied to the input coil, and an amplified radiofrequency signal is developed across the dc SQUID ring and transmitted to exteriorly of the shield. A power gain of 19.5 +- 0.5 dB has been achieved with a noise temperature of 1.0 +- 0.4 K at a frequency of 100 MHz.

  3. Mitigation of geomagnetically induced and dc stray currents. Final report

    SciTech Connect (OSTI)

    Kappenman, J.G.

    1983-12-01T23:59:59.000Z

    This report primarily describes several approaches to mitigate the effects of Geomagnetic Induced Currents (GIC) and dc stray currents in power systems; the engineering and design considerations for a neutral capacitor blocking device; and development and testing of a prototype device of this type. Modeling of the power system for computation of GIC are described. Results from three field tests, for documenting the effects of GIC by injecting direct current (dc) into the neutrals of the transformers, are presented. Several mitigation concepts are discussed and evaluated. The concept of blocking GIC and dc stray currents by a neutral capacitor is addressed in detail. The development and testing of the prototype blocking device is described. The technical requirements and specifications for the application of these devices are also included. A perspective on the economics of GIC mitigation is included. The effect of GIC and dc stray currents on HVdc converter operation, supported by computer simulations, is also discussed.

  4. Thermoelectric DC conductivities with momentum dissipation from higher derivative gravity

    E-Print Network [OSTI]

    Long Cheng; Xian-Hui Ge; Zu-Yao Sun

    2015-04-28T23:59:59.000Z

    We present a mechanism of momentum relaxation in higher derivative gravity by adding linear scalar fields to the Gauss-Bonnet theory. We analytically computed all of the DC thermoelectric conductivities in this theory by adopting the method given by Donos and Gauntlett in [arXiv:1406.4742]. The results show that the DC electric conductivity is not a monotonic function of the effective impurity parameter $\\beta$: in the small $\\beta$ limit, the DC conductivity is dominated by the coherent phase, while for larger $\\beta$, pair creation contribution to the conductivity becomes dominant, signaling an incoherent phase. In addition, the DC heat conductivity is found independent of the Gauss-Bonnet coupling constant.

  5. National Science Bowl Brings Best and Brightest to DC

    Broader source: Energy.gov [DOE]

    The National Science Bowl Finals in Washington D.C. April 27 to 30 pit 113 high and middle school teams against one another answering questions Jeopardy-style about biology, chemistry, earth science, physics, astronomy, and math.

  6. Reactive DC magnetron sputtering of ultrathin superconducting niobium nitride films

    E-Print Network [OSTI]

    Dane, Andrew E. (Andrew Edward)

    2015-01-01T23:59:59.000Z

    DC reactive magnetron sputtering was used to deposit few-nanometer-thick films of niobium nitride for fabrication of superconducting devices. Over 1000 samples were deposited on a variety of substrates, under various chamber ...

  7. Low Cost, High Temperature, High Ripple Current DC Bus Capacitors...

    Broader source: Energy.gov (indexed) [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C. ape031liu2010p.pdf More Documents &...

  8. A Multiphase, Modular, Bidirectional, Triple-Voltage DC-DC Converter Power Systems

    SciTech Connect (OSTI)

    Su, Gui-Jia [ORNL; Tang, Lixin [ORNL

    2008-01-01T23:59:59.000Z

    Electrical power systems in future hybrid and fuel cell vehicles may employ three voltage [14 V, 42 V, and high voltage (HV)] nets. These will be necessary to accommodate existing 14-V loads as well as efficiently handle new heavy loads at the 42-V net and a traction drive on the HV bus. A low-cost DC-DC converter was proposed for connecting the three voltage nets. It minimizes the number of switches and their associated gate driver components by using two half-bridges and a high-frequency transformer. Another salient feature is that the half bridge on the 42-V bus is also utilized to provide the 14-V bus by operating at duty ratios around an atypical value of 1/3. Moreover, it makes use of the parasitic capacitance of the switches and the transformer leakage inductance for soft switching. The use of half bridges makes the topology well suited for interleaved multiphase modular configurations as a means to increase the power level because the capacitor legs can be shared. This paper presents simulation and experimental results on an interleaved two-phase arrangement rated at 4.5 kW. Also discussed are the benefits of operating with an atypical duty ratio on the transformer and a preferred multiphase configuration to minimize capacitor ripple currents.

  9. Analysis of a transformer-less, multi-level DC-DC converter for HVDC operation

    SciTech Connect (OSTI)

    Karady, G.G.; Devarajan, S. [Arizona State Univ., Tempe, AZ (United States)

    1998-12-31T23:59:59.000Z

    HVDC systems require DC step up and DC step down units. The traditional approach is the application of twelve-pulse thyristor bridges with transformers. The developments of fast switching IGBT devices permit the development of transformer-less, multi-level converters. A multi-level circuit was suggested by Limpaecher. This paper presents a detailed simulation of the proposed circuit together with the analysis of its performance. The converter consists of a set of capacitors, air core inductors and solid state switches arranged in a ladder network. In the step-up mode, the closing of solid state switches resonantly charges the capacitors in parallel through an air-cored inductor. Then solid state switches resonantly charges the capacitors in parallel through an air-cored inductor. Then solid state switches connect the capacitors in series and discharge them through an air-core inductor to the load. In the step-down mode the capacitors are charged in series and discharged in parallel. The circuit has three modes of operation in each cycle: charge, inversion, and discharge. The circuit operation is analyzed in each mode using SPICE simulations. The selection of the components is discussed and output voltage regulation is analyzed. The results show that the proposed circuit promises significant reduction of losses, because of the zero current switching. The investment cost is reduced because of the elimination of transformers.

  10. Analysis and design of a saturable reactor assisted soft-switching full-bridge dc-dc converter

    SciTech Connect (OSTI)

    Hamada, Satoshi (Sansha Electric Manufacturing Co., Ltd., Osaka (Japan)); Nakaoka, Mutsuo (Kobe Univ. (Japan). Dept. of Electrical and Electronics Engineering)

    1994-05-01T23:59:59.000Z

    Analysis and design considerations for a saturable reactor assisted soft-switching full-bridge dc-dc converter are presented. The converter has advantages such as low switching losses with no substantial increase in conduction losses, wide load range, and constant frequency operation. To show how to utilize the analysis results, a 350-W, 500-kHz converter is chosen as a design example. The results are verified experimentally on a prototype converter.

  11. A High Efficiency DC-DC Converter Topology Suitable for Distributed Large Commercial and Utility Scale PV Systems

    SciTech Connect (OSTI)

    Mohammed S. Agamy; Maja Harfman-Todorovic; Ahmed Elasser; Robert L. Steigerwald; Juan A. Sabate; Song Chi; Adam J. McCann; Li Zhang; Frank Mueller

    2012-09-01T23:59:59.000Z

    In this paper a DC-DC power converter for distributed photovoltaic plant architectures is presented. The proposed converter has the advantages of simplicity, high efficiency, and low cost. High efficiency is achieved by having a portion of the input PV power directly fed forward to the output without being processed by the converter. The operation of this converter also allows for a simplified maximum power point tracker design using fewer measurements

  12. Reid Rosnick/DC/USEPA/US 10/25/2012 11:54 AM

    E-Print Network [OSTI]

    EPA-694 Reid Rosnick/DC/USEPA/US 10/25/2012 11:54 AM To Philip Egidi cc bcc Subject Re: Subpart W Pennsylvania Ave., NW Washington, DC 20460 202.343.9563 rosnick.reid@epa.gov -----Philip Egidi/DC/USEPA/US wrote: ----- To: Reid Rosnick/DC/USEPA/US@EPA From: Philip Egidi/DC/USEPA/US Date: 10/25/2012 11:41AM Cc

  13. Building Location Aware Apps on the iPhone

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced MaterialsEnergy,Envelope SHARE Building Envelopes MFEL.jpgiPhone

  14. Property:Incentive/Cont2Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska:PrecourtOid Jump to:DocketFlowGpmGrossGenDept Jump to:Phone"

  15. Property:Incentive/ContPhone2 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska:PrecourtOid Jump to:DocketFlowGpmGrossGenDeptContDivContPhone2 Jump

  16. Property:RAPID/Contact/ID2/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation,ID2/Phone Jump to: navigation, search

  17. Property:RAPID/Contact/ID3/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation,ID2/Phone Jump to:EmailID3/Organization

  18. Property:RAPID/Contact/ID6/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation,ID2/Phone JumppagesType

  19. Property:RAPID/Contact/ID9/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to:This property is set byis a subproperty of Phone

  20. 1-4244-1243-9/07/$25.00 2007 IEEE Mobile phone users in Kyrgyzstan

    E-Print Network [OSTI]

    Anderson, Richard

    1-4244-1243-9/07/$25.00 ©2007 IEEE Mobile phone users in Kyrgyzstan: A case study of identifying in Kyrgyzstan; (2) detect and communicate user requirements for that product concept to a design team; and (3 user needs and goals for mobile phone users in Kyrgyzstan. We believe the process by which we developed

  1. Graphics for the Masses: A Hardware Rasterization Architecture for Mobile Phones

    E-Print Network [OSTI]

    Graphics for the Masses: A Hardware Rasterization Architecture for Mobile Phones Tomas Akenine typically is one of the most energy-consuming operations, and because mobile phones need to use as little also the power consumption. CR Categories: I.3.1 [Computer Graphics]: Hardware Architecture--Graphics

  2. Office of Human Resources 907-450-8200 (phone) 907-450-8201 (fax)

    E-Print Network [OSTI]

    Pantaleone, Jim

    Office of Human Resources 907-450-8200 (phone) 907-450-8201 (fax) 212 Butrovich Building PO Box-6000147 Address: 910 Yukon Dr, Ste 212 or PO Box 755140 Fairbanks AK 99775-5140 Employer Phone Number: (907) 450 (907) 450-8200 UA Anchorage Human Resource Services (907) 786-4608 UA Fairbanks Human Resources (907

  3. An Efficient Energy Management System for Android Phone Using Bayesian Networks

    E-Print Network [OSTI]

    Cho, Sung-Bae

    An Efficient Energy Management System for Android Phone Using Bayesian Networks Young-Seol Lee, proximity, light and orientation sensors for context-awareness. Energy-efficient battery management systems, it becomes an issue to develop the techniques for efficient energy management on a mobile phone [2, 3, 4

  4. Characterization of the PvdS-regulated promoter motif in Pseudomonas syringae pv. tomato DC3000 reveals

    E-Print Network [OSTI]

    Myers, Chris

    Characterization of the PvdS-regulated promoter motif in Pseudomonas syringae pv. tomato DC3000S, a group IV sigma factor encoded by Pseudomonas syringae pv. tomato DC3000 (DC3000), a plant pathogen, 2002; Potvin et al., 2008). The model plant pathogen Pseudomonas syringae pv. tomato DC3000 (DC3000

  5. DESIGN OF A DC/RF PHOTOELECTRON GUN.

    SciTech Connect (OSTI)

    YU,D.NEWSHAM,Y.SMIRONOV,A.YU,J.SMEDLEY,J.SRINIVASAN RAU,T.LEWELLEN,J.ZHOLENTS,A.

    2003-05-12T23:59:59.000Z

    An integrated dc/rf photoelectron gun produces a low-emittance beam by first rapidly accelerating electrons at a high gradient during a short ({approx}1 ns), high-voltage pulse, and then injecting the electrons into an rf cavity for subsequent acceleration. Simulations show that significant improvement of the emittance appears when a high field ({approx} 0.5-1 GV/m) is applied to the cathode surface. An adjustable dc gap ({le} 1 mm) which can be integrated with an rf cavity is designed for initial testing at the Injector Test Stand at Argonne National Laboratory using an existing 70-kV pulse generator. Plans for additional experiments of an integrated dc/rf gun with a 250-kV pulse generator are being made.

  6. Active dc filter for HVDC system--A test installation in the Konti-Skan DC link at Lindome converter station

    SciTech Connect (OSTI)

    Zhang, Wenyan; Asplund, G. (ABB Power Systems, Ludvika (Sweden). HVDC Division); Aberg, A. (ABB Corporate Research, Lund (Sweden). Dept. of Man-Machine Communication); Jonsson, U. (Svenska Kraftnaet, Vaellingby (Sweden)); Loeoef, O. (Vattenfall AB, Trollhaettan (Sweden). Region Vaestsverige)

    1993-07-01T23:59:59.000Z

    The purpose of introducing active dc filters is to meet the more and more stringent requirement from power utilities on limiting telephone interference caused by harmonic currents from HVdc transmission lines, without unnecessarily increasing the cost of HVdc stations. An active dc filter installed in the Konti-Skan HVdc link is described. The active dc filter is connected at the bottom of an existing passive dc filter at the Lindome station. The active dc filter includes optic harmonic current measuring unit, control system, protection and supervision system, PWM power amplifier, high-frequency transformer, surge arrester, and coupling apparatuses. The active dc filter has small physical size and occupies small ground area. The performance of the active dc filter for eliminating the disturbing harmonics is excellent. To achieve comparable results by passive filters would require something like ten times more high voltage equipment.

  7. Application of direct pulsewidth modulation scheme to AC-DC converters: - a way to reduce ripple

    E-Print Network [OSTI]

    Zhang, Yuemin

    1993-01-01T23:59:59.000Z

    Modulation (ISPWM), 4 Direct Pulsewidth Modulation (DPWM). 15 5 Single Phase Half Controlled PWM ac-dc Converter . 6 Single Phase Full controlled PWM ac-dc Converter . 18 18 7 Simulation of SPWM ac-dc Converter. 20 8 Output Voltage Spectra of SPWM ac... 30 Balanced Three Phase Inputs 31 Output Voltage of A Three Phase Full Controlled ac-dc SPWM Converter. 42 32 Output Voltage of A Three Phase Full Controlled ac-dc EPWM Con- verter 33 Output Voltage of A Three Phase Full Controlled ac-dc ISPWM Con...

  8. Graphite electrode DC arc furnace. Innovative technology summary report

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    The Graphite Electrode DC Arc Furnace (DC Arc) is a high-temperature thermal process, which has been adapted from a commercial technology, for the treatment of mixed waste. A DC Arc Furnace heats waste to a temperature such that the waste is converted into a molten form that cools into a stable glassy and/or crystalline waste form. Hazardous organics are destroyed through combustion or pyrolysis during the process and the majority of the hazardous metals and radioactive components are incorporated in the molten phase. The DC Arc Furnace chamber temperature is approximately 593--704 C and melt temperatures are as high as 1,500 C. The DC Arc system has an air pollution control system (APCS) to remove particulate and volatiles from the offgas. The advantage of the DC Arc is that it is a single, high-temperature thermal process that minimizes the need for multiple treatment systems and for extensive sorting/segregating of large volumes of waste. The DC Arc has the potential to treat a wide range of wastes, minimize the need for sorting, reduce the final waste volumes, produce a leach resistant waste form, and destroy organic contaminants. Although the DC arc plasma furnace exhibits great promise for treating the types of mixed waste that are commonly present at many DOE sites, several data and technology deficiencies were identified by the Mixed Waste Focus Area (MWFA) regarding this thermal waste processing technique. The technology deficiencies that have been addressed by the current studies include: establishing the partitioning behavior of radionuclides, surrogates, and hazardous metals among the product streams (metal, slag, and offgas) as a function of operating parameters, including melt temperature, plenum atmosphere, organic loading, chloride concentration, and particle size; demonstrating the efficacy of waste product removal systems for slag and metal phases; determining component durability through test runs of extended duration, evaluating the effect of feed composition variations on process operating conditions and slag product performance; and collecting mass balance and operating data to support equipment and instrument design.

  9. High voltage dc--dc converter with dynamic voltage regulation and decoupling during load-generated arcs

    DOE Patents [OSTI]

    Shimer, D.W.; Lange, A.C.

    1995-05-23T23:59:59.000Z

    A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules. 5 Figs.

  10. High voltage dc-dc converter with dynamic voltage regulation and decoupling during load-generated arcs

    DOE Patents [OSTI]

    Shimer, Daniel W. (Danville, CA); Lange, Arnold C. (Livermore, CA)

    1995-01-01T23:59:59.000Z

    A high-power power supply produces a controllable, constant high voltage output under varying and arcing loads. The power supply includes a voltage regulator, an inductor, an inverter for producing a high frequency square wave current of alternating polarity, an improved inverter voltage clamping circuit, a step up transformer, an output rectifier for producing a dc voltage at the output of each module, and a current sensor for sensing output current. The power supply also provides dynamic response to varying loads by controlling the voltage regulator duty cycle and circuitry is provided for sensing incipient arc currents at the output of the power supply to simultaneously decouple the power supply circuitry from the arcing load. The power supply includes a plurality of discrete switching type dc--dc converter modules.

  11. BEAM DYNAMICS SIMULATIONS FOR A DC GUN BASED INJECTOR FOR PERL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DC gun. The schematic layout of a PERL DC gun based injector and its preliminary beam dynamics are presented in this paper. The transverse and longitudinal emittance of photo-...

  12. Analysis of Fe Nanoparticles Using XPS Measurements Under D.C...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fe Nanoparticles Using XPS Measurements Under D.C. or Pulsed-Voltage Bias. Analysis of Fe Nanoparticles Using XPS Measurements Under D.C. or Pulsed-Voltage Bias. Abstract: The...

  13. If you reside in WASHINGTON, DC - MD -VA - WV your salary will...

    National Nuclear Security Administration (NNSA)

    If you are employed in the WASHINGTON, DC Metropolitan Area (D.C., Baltimore, Northern VA, Eastern WV, and Southern PA) your salary will range from: Pay Band Pay Plan(s) Minimum...

  14. Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on...

    Energy Savers [EERE]

    Moniz's Remarks at CSIS in Washington D.C. on Energy Security 40 Years after the Embargo - As Delivered Energy Secretary Moniz's Remarks at CSIS in Washington D.C. on Energy...

  15. U.S. Department of Energy - Washington, DC | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Photovoltaic System at the Forrestal Building in Washington, DC The U.S. Department of Energy (DOE) is housed in the Forrestal Building in Washington, DC. A photovoltaic (PV)...

  16. Electrostatic coalescence system with independent AC and DC hydrophilic electrodes

    DOE Patents [OSTI]

    Hovarongkura, A. David (Arlington, VA); Henry, Jr., Joseph D. (Morgantown, WV)

    1981-01-01T23:59:59.000Z

    An improved electrostatic coalescence system is provided in which independent AC and DC hydrophilic electrodes are employed to provide more complete dehydration of an oil emulsion. The AC field is produced between an AC electrode array and the water-oil interface wherein the AC electrode array is positioned parallel to the interface which acts as a grounded electrode. The emulsion is introduced into the AC field in an evenly distributed manner at the interface. The AC field promotes drop-drop and drop-interface coalescence of the water phase in the entering emulsion. The continuous oil phase passes upward through the perforated AC electrode array and enters a strong DC field produced between closely spaced DC electrodes in which small dispersed droplets of water entrained in the continuous phase are removed primarily by collection at hydrophilic DC electrodes. Large droplets of water collected by the electrodes migrate downward through the AC electrode array to the interface. All phase separation mechanisms are utilized to accomplish more complete phase separation.

  17. DC WRRC Report No. 126 GROUND WATER RESOURCE ASSESSMENT STUDY

    E-Print Network [OSTI]

    District of Columbia, University of the

    DRILLING AND FIELD OPERATIONS REPORT FOR THE GROUP A WELLS D.C. WATER RESOURCES RESEARCH CENTER University No. 126 GROUND WATER RESOURCE ASSESSMENT STUDY FOR THE DISTRICT OF COLUMBIA WELL DRILLING AND FIELDDC WRRC Report No. 126 GROUND WATER RESOURCE ASSESSMENT STUDY FOR THE DISTRICT OF COLUMBIA WELL

  18. D.C. Water Resources Research Center Annual Technical Report

    E-Print Network [OSTI]

    and among agencies, universities, and other area researchers; and to support the development and Guidelines under the Water Resources Development Act, and other federal spending and activities relatedD.C. Water Resources Research Center Annual Technical Report FY 2009 D.C. Water Resources Research

  19. EE443L Lab 2: Modeling a DC Motor Introduction

    E-Print Network [OSTI]

    Wedeward, Kevin

    and add conversion factors. Copy the LabVIEW VI lab2.vi and its associated subVI Altera the four conversion factors. Motor voltage is measured with a voltage divider to ensure DAQ card analog: The DC motor is a common actuator in control systems that converts electrical energy into rotational

  20. DC Optimal Power Flow: Uniqueness and Chee Wei Tan

    E-Print Network [OSTI]

    Tan, Chee Wei

    and are computationally fast for practical smart power grids. I. BACKGROUND The Optimal Power Flow (OPF) problem network. The DC-OPF can be practically important in a smart grid, where there are renewables, e.g., solar implications on how algorithms can be designed to solve the OPF in a smart grid. Different from prior work

  1. D.C. Water Resources Research Institute Annual Technical Report

    E-Print Network [OSTI]

    projects that address the three components of integrated urban water system: storm water runoff and sewer developing and maintaining new environmental quality testing and modeling tools to advance water researchD.C. Water Resources Research Institute Annual Technical Report FY 2013 D.C. Water Resources

  2. Natural Gas Pipeline Leaks Across Washington, DC Robert B. Jackson,,,

    E-Print Network [OSTI]

    Jackson, Robert B.

    Natural Gas Pipeline Leaks Across Washington, DC Robert B. Jackson,,, * Adrian Down, Nathan G increased in recent decades, but incidents involving natural gas pipelines still cause an average of 17 fatalities and $133 M in property damage annually. Natural gas leaks are also the largest anthropogenic

  3. High Voltage DC Transmission 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    1 High Voltage DC Transmission 1.0 Introduction HVDC has been applied in electric power systems for many years now. Figure 1 illustrates worldwide many of the HVDC applications [1]. Fig. 1 ABB provides a webpage which summarizes HVDC projects by type and capacity or by commissioning year [2]. Wikipedia [3

  4. High Voltage DC Transmission 2 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    1 High Voltage DC Transmission 2 1.0 Introduction Interconnecting HVDC within an AC system requires on use of switching devices collectively referred to in the HVDC community as valves. Valves may be non. Fig. 1 There have been three types of devices for implementing HVDC converter circuits: mercury

  5. WASHINGTON TECHNICAL INSTITUTE WASHINGTON, D.C. 20008

    E-Print Network [OSTI]

    District of Columbia, University of the

    WASHINGTON TECHNICAL INSTITUTE WASHINGTON, D.C. 20008 WRRC REPORT NO. 9 CHARACTERIZATION-379, as amended. Agreement No. 14-34-0001-6066 Water Resources Research Center Washington Technical Institute Analysis of Composite Samples Before Concentration............ 16 5. Organic Losses During Concentration

  6. Reprint & Copyright by Aerospace Medical Association, Washington, DC

    E-Print Network [OSTI]

    Reprint & Copyright ©by Aerospace Medical Association, Washington, DC TECHNICAL NOTE Reflectance.EPICS Biomedical Engineering and Science Institute and Department of Electrical and Computer Engineering, Drexel and pulsatile and mean Doppler velocities were examined as predictors of impending peripheral light loss (PLL

  7. The geography and carbon footprint of mobile phone use in Cote d'Ivoire

    E-Print Network [OSTI]

    Salnikov, Vsevolod; Youn, Hyejin; Lambiotte, Renaud; Gastner, Michael T

    2013-01-01T23:59:59.000Z

    The newly released Orange D4D mobile phone data base provides new insights into the use of mobile technology in a developing country. Here we perform a series of spatial data analyses that reveal important geographic aspects of mobile phone use in Cote d'Ivoire. We first map the locations of base stations with respect to the population distribution and the number and duration of calls at each base station. On this basis, we estimate the energy consumed by the mobile phone network. Finally, we perform an analysis of inter-city mobility, and identify high-traffic roads in the country.

  8. Building Scale DC Microgrids Chris Marnay, Steven Lanzisera, Michael Stadler, and Judy Lai

    E-Print Network [OSTI]

    of building loads are either native DC, such as electronics and compact fluorescent and light emitting diode

  9. Interviews in Washington, DC for Albert Einstein Fellowship Semi-Finalists

    Broader source: Energy.gov [DOE]

    Selected semi-finalists in the Albert Einstein Distinguished Educator Fellowship are invited to DC for interviews.

  10. A Decentralized Protection Scheme for Converters Utilizing a DC-link Inductor

    E-Print Network [OSTI]

    Lipo, Thomas

    - as in HVDC transmission for example - as well as in DC-links for high-power current source inverters

  11. Control of a Fuel-Cell Powered DC Electric Vehicle Motor

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith Sigurd Skogestad Meeting, 2005 www.ntnu.no Federico Zenith, Sigurd Skogestad, Control of a Fuel-Cell Powered DC Electric Vehicle Motor #12;2 Outline 1) Control of Fuel Cells--Status 2) Dynamic Modelling of Fuel Cells 3) DC

  12. Development of 13-V, 5000-A DC Power Supply with High-Frequency Transformer Coupling

    E-Print Network [OSTI]

    Fujimoto, Hiroshi

    -voltage and large-current DC power supply with a high-frequency transformer coupling, which is applied to electric. Keywords-DC power supply; low-voltage and large-current; high-frequency transformer; Schottky diodeDevelopment of 13-V, 5000-A DC Power Supply with High-Frequency Transformer Coupling Applied

  13. FLATNESS BASED CONTROL OF A BUCK-CONVERTER DRIVEN DC MOTOR

    E-Print Network [OSTI]

    Knobloch,Jürgen

    FLATNESS BASED CONTROL OF A BUCK-CONVERTER DRIVEN DC MOTOR Felix Antritter ,1 Peter Maurer Johann on the circuit and control design of a buck converter driven DC motor. The steps of design, as for example objective: tracking control of the DC motor's shaft angular velocity. The dynamic system composed from

  14. 164 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 21, NO. 1, JANUARY 2006 A Digitally Controlled DC/DC Converter

    E-Print Network [OSTI]

    Popovic, Zoya

    164 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 21, NO. 1, JANUARY 2006 A Digitally Controlled DC of power, dynamic control of the drain supply voltage has been proposed [1]­[6]. The technique of adjusting-loop implementation of the RFPA power control through the drain supply voltage. The ob- jectives are to improve

  15. U-239: Apple iPhone SMS Processing Flaw Lets Remote Users Spoof...

    Energy Savers [EERE]

    A vulnerability was reported in Apple iPhone. A remote user can send an SMS message with a specially crafted User Data Header (UDH) value that specifies an alternate...

  16. Evaluating the accuracy of data collection on mobile phones: A study of forms, SMS, and voice

    E-Print Network [OSTI]

    Patnaik, Somani

    While mobile phones have found broad application in reporting health, financial, and environmental data, there has been little study of the possible errors incurred during mobile data collection. This paper provides the ...

  17. Clean Cities Launches iPhone App for Alternative Fueling Station...

    Broader source: Energy.gov (indexed) [DOE]

    iPhone users now have access to a free app that locates fueling stations offering alternative fuels, including electricity, natural gas, biodiesel, E85, propane, and hydrogen. The...

  18. Christopher Bryant Williams; Email: cwilliams@gatech.edu; Phone: 404-964-1749 1 CURRICULUM VITAE

    E-Print Network [OSTI]

    Christopher Bryant Williams; Email: cwilliams@gatech.edu; Phone: 404-964-1749 1 CURRICULUM VITAE Name: Christopher Bryant Williams Office Address: Systems Realization Laboratory George W. Woodruff Engineering, Heat Transfer, Electronic Systems, #12;Christopher Bryant Williams; Email: cwilliams

  19. New Mexico State Cooperative Extension Service Phone 505/646-1131

    E-Print Network [OSTI]

    New Mexico State University Cooperative Extension Service Phone 505/646-1131 P.O. Box 30003 MSC 3AE that desired classroom pollution prevention programs. Support Staff Clay Sewell, Program Assistant, Water

  20. Anthem Cyber Attack: Information and Call-in Phone Number | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Anthem Cyber Attack: Information and Call-in Phone Number Colleagues, As you may have heard by now, Anthem was the latest victim of a cyber attack. Anthem reports that they were...

  1. Aligning product and supply chain strategies in the mobile phone industry

    E-Print Network [OSTI]

    Scanlon, Robert (Robert Curtis)

    2009-01-01T23:59:59.000Z

    Designing and managing the supply chain of a company in the mobile phone industry is particularly challenging. Short product lifecycles, rapidly evolving technology, globally linked distribution networks, increasing product ...

  2. India and China: A Comparative Analysis of Mobile Phones in Agriculture

    E-Print Network [OSTI]

    Bonthu, Prashanthi

    2014-05-31T23:59:59.000Z

    In 2010, China and India were named the first and second largest mobile phone markets in the world based on their number of subscribers. India and China have focused on extending their telecommunication services into rural areas for socio...

  3. Evolution of the mobile phone supply chain : the case of Ecuador

    E-Print Network [OSTI]

    Savannet, Santolina

    2010-01-01T23:59:59.000Z

    The cell phone industry is growing at a vertiginous pace. It has a life-changing impact on individuals and businesses in developing countries, where it can make up for the lack of infrastructure. In Latin America, the cell ...

  4. Evaluating Qualityy and CCompreehensioon of RReal-Timme Signn Languuage Video onn Mobilee Phones

    E-Print Network [OSTI]

    Wobbrock, Jacob O.

    Phones Jessicaa J. Tran1 , JJoy Kim2 , Jaaehong Chon1 , Evee A. Riskin11 , Richard EE. Ladner2 , Jacob that copies arre nnot made or distrributed for profit or commercial aadvantage and thaat ccopies bear

  5. Recycling of WEEE: Characterization of spent printed circuit boards from mobile phones and computers

    SciTech Connect (OSTI)

    Yamane, Luciana Harue, E-mail: lucianayamane@uol.com.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Tavares de Moraes, Viviane, E-mail: tavares.vivi@gmail.com [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Crocce Romano Espinosa, Denise, E-mail: espinosa@usp.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Soares Tenorio, Jorge Alberto, E-mail: jtenorio@usp.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil)

    2011-12-15T23:59:59.000Z

    Highlights: > This paper presents new and important data on characterization of wastes of electric and electronic equipments. > Copper concentration is increasing in mobile phones and remaining constant in personal computers. > Printed circuit boards from mobile phones and computers would not be mixed prior treatment. - Abstract: This paper presents a comparison between printed circuit boards from computers and mobile phones. Since printed circuits boards are becoming more complex and smaller, the amount of materials is constantly changing. The main objective of this work was to characterize spent printed circuit boards from computers and mobile phones applying mineral processing technique to separate the metal, ceramic, and polymer fractions. The processing was performed by comminution in a hammer mill, followed by particle size analysis, and by magnetic and electrostatic separation. Aqua regia leaching, loss-on-ignition and chemical analysis (inductively coupled plasma atomic emission spectroscopy - ICP-OES) were carried out to determine the composition of printed circuit boards and the metal rich fraction. The composition of the studied mobile phones printed circuit boards (PCB-MP) was 63 wt.% metals; 24 wt.% ceramics and 13 wt.% polymers; and of the printed circuit boards from studied personal computers (PCB-PC) was 45 wt.% metals; 27 wt.% polymers and ceramics 28 wt.% ceramics. The chemical analysis showed that copper concentration in printed circuit boards from personal computers was 20 wt.% and in printed circuit boards from mobile phones was 34.5 wt.%. According to the characteristics of each type of printed circuit board, the recovery of precious metals may be the main goal of the recycling process of printed circuit boards from personal computers and the recovery of copper should be the main goal of the recycling process of printed circuit boards from mobile phones. Hence, these printed circuit boards would not be mixed prior treatment. The results of this paper show that copper concentration is increasing in mobile phones and remaining constant in personal computers.

  6. Dependence of plasma characteristics on dc magnetron sputter parameters

    SciTech Connect (OSTI)

    Wu, S.Z. [Recording Media Operation, Seagate Technology, 47010 Kato Road, Fremont, California 94538 (United States)

    2005-10-15T23:59:59.000Z

    Plasma discharge characteristics of a dc magnetron system were measured by a single Langmuir probe at the center axis of the dual-side process chamber. Plasma potential, floating potential, electron and ion densities, and electron temperature were extracted with varying dc power and gas pressure during sputter deposition of a metal target; strong correlations were shown between these plasma parameters and the sputter parameters. The electron density was controlled mostly by secondary electron generation in constant power mode, while plasma potential reflects the confinement space variation due to change of discharge voltage. When discharge pressure was varied, plasma density increases with the increased amount of free stock molecules, while electron temperature inversely decreased, due to energy-loss collision events. In low-pressure discharges, the electron energy distribution function measurements show more distinctive bi-Maxwellian distribution, with the fast electron temperature gradually decreases with increased gas pressure.

  7. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng (Knoxville, TN); Lai, Jih-Sheng (Blacksburg, VA)

    2002-01-01T23:59:59.000Z

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  8. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng (Oak Ridge, TN); Lai, Jih-Sheng (Knoxville, TN)

    1997-01-01T23:59:59.000Z

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  9. Multilevel cascade voltage source inverter with seperate DC sources

    DOE Patents [OSTI]

    Peng, Fang Zheng; Lai, Jih-Sheng

    2001-04-03T23:59:59.000Z

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations.

  10. Multilevel cascade voltage source inverter with separate DC sources

    DOE Patents [OSTI]

    Peng, F.Z.; Lai, J.S.

    1997-06-24T23:59:59.000Z

    A multilevel cascade voltage source inverter having separate DC sources is described herein. This inverter is applicable to high voltage, high power applications such as flexible AC transmission systems (FACTS) including static VAR generation (SVG), power line conditioning, series compensation, phase shifting and voltage balancing and fuel cell and photovoltaic utility interface systems. The M-level inverter consists of at least one phase wherein each phase has a plurality of full bridge inverters equipped with an independent DC source. This inverter develops a near sinusoidal approximation voltage waveform with only one switching per cycle as the number of levels, M, is increased. The inverter may have either single-phase or multi-phase embodiments connected in either wye or delta configurations. 15 figs.

  11. This document is a preprint of the paper: L. Meng, T. Dragicevic, J.M. Guerrero, and J.C Vasquez, "Optimization with system damping restoration for droop controlled dc-dc converters," in

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    , "Optimization with system damping restoration for droop controlled dc-dc converters," in Proc. IEEE Energy Restoration for Droop Controlled DC-DC Converters Lexuan Meng, Tomislav Dragicevic, Josep M. Guerrero, Juan C systems and uninterruptable power supply systems. Droop control along with virtual resistance (VR

  12. USCOMM-WB-DC PRELIMZNARY REPORT OH HURRICANE DAISY

    E-Print Network [OSTI]

    QC 945.2 .D3 H8 1958 c.2 #12;#12;USCOMM-WB-DC #12;PRELIMZNARY REPORT OH HURRICANE DAISY AWGUST 24-29, 1958 Hurricane "Daisy", intense but small in area, was detected as a tropical storm about 300 miles into a hurricane on August 25. A u g u s t 27 it drifted very slowly northward. coast increased. the Atlantic off

  13. Disc rotors with permanent magnets for brushless dc motor

    SciTech Connect (OSTI)

    Hawsey, R.A.; Bailery, J.M.

    1992-05-26T23:59:59.000Z

    This patent describes a brushless dc permanent magnet motor for driving an autonomous underwater vehicle. It comprises first and second substantially flat, generally cylindrical stators disposed in side by side relation; a first substantially flat, generally cylindrical rotor; a first shaft connected to the first rotor and a second, concentric shaft connected to the second rotor; and means for providing rotation of the first and second shafts in opposite directions.

  14. The Use of DC Glow Discharges as Undergraduate Educational Tools

    SciTech Connect (OSTI)

    Stephanie A. Wissel and Andrew Zwicker, Jerry Ross, and Sophia Gershman

    2012-10-09T23:59:59.000Z

    Plasmas have a beguiling way of getting students excited and interested in physics. We argue that plasmas can and should be incorporated into the undergraduate curriculum as both demonstrations and advanced investigations of electromagnetism and quantum effects. Our device, based on a direct current (DC) glow discharge tube, allows for a number of experiments into topics such as electrical breakdown, spectroscopy, magnetism, and electron temperature.

  15. DC and RF Measurements of Serial Bi-SQUID Arrays

    E-Print Network [OSTI]

    Prokopenko, G V; de Escobar, A Leese; Taylor, B; de Andrade, M C; Berggren, S; Longhini, P; Palacios, A; Nisenoff, M; Fagaly, R L

    2012-01-01T23:59:59.000Z

    SQUID arrays are promising candidates for low profile antennas and low noise amplifier applications. We present the integrated circuit designs and results of DC and RF measurements of the wideband serial arrays based on integration of linear bi-SQUID cells forming a Superconducting Quantum Interference Filter (bi-SQUID SQIF). Various configurations of serial arrays designs are described. The measured linearity, power gain, and noise temperature are analyzed and compared. The experimental results are matched to results of mathematical modeling. A serial bi-SQUID SQIF arrays are mounted into a coplanar waveguide (CPW) and symmetrically grounded to corresponding sides of CPW. The RF output comes out from the central common line, which is also used for DC biasing and forms a symmetrical balanced output. The signal and DC flux biasing line is designed as coplanar lines passed in parallel over each bi-SQUID cell in a bidirectional fashion concentrating magnetic flux inside of each cell. Serial bi-SQUID SQIF arrays ...

  16. Summary of electric vehicle dc motor-controller tests

    SciTech Connect (OSTI)

    McBrien, E F; Tryon, H B

    1982-09-01T23:59:59.000Z

    Available performance data for production motors are usually of marginal value to the electric vehicle designer. To provide at least a partial remedy to this situation, tests of typical dc propulsion motors and controllers were conducted as part of the DOE Electric Vehicle Program. The objectives of this program were to evaluate the differences in the performance of dc motors when operating with chopper-type controllers and when operating on direct current; and to gain an understanding of the interactions between the motor and the controller which cause these differences. Toward this end, motor-controller tests performed by the NASA Lewis Research Center provided some of the first published data that quantified motor efficiency variations for both ripple-free (straight dc) and chopper modes of operation. Test and analysis work at the University of Pittsburgh explored motor-controller relationships in greater depth. And to provide additional data, 3E Vehicles tested two small motors, both on a dynamometer and in a vehicle, and the Eaton Corporation tested larger motors, using sophisticated instrumentation and digital processing techniques. All the motors tested were direct-current types. Of the separately excited types, seven were series wound and two were shunt wound. One self-excited permanent magnet type was also tested. Four of the series wound motors used brush shifting to obtain good commutation. In almost all cases, controller limitations constrained the test envelope so that the full capability of the motors could not be explored.

  17. Abstract -This paper presents the coordinated control of distributed energy storage systems (DESSs) in DC micro-grids.

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    ) in DC micro-grids. In order to balance the state-of-charge (SoC) of each energy storage unit (ESU--Droop control; distributed energy storage system (DESS); DC micro-grids; state-of-charge (SoC) I. INTRODUCTION and more popularity [1]. Nowadays DC micro-grids are becoming more attractive with the raise of DC power

  18. Optimal Demand Response in DC Distribution Networks Hamed Mohsenian-Rad, Member, IEEE and Ali Davoudi, Member, IEEE

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    such as photovoltaic systems are essentially DC sources. Battery storage devices are also easier H. Mohsenian

  19. Multiphase soft switched DC/DC converter and active control technique for fuel cell ripple current elimination

    DOE Patents [OSTI]

    Lai, Jih-Sheng (Blacksburg, VA); Liu, Changrong (Sunnyvale, CA); Ridenour, Amy (Salem, VA)

    2009-04-14T23:59:59.000Z

    DC/DC converter has a transformer having primary coils connected to an input side and secondary coils connected to an output side. Each primary coil connects a full-bridge circuit comprising two switches on two legs, the primary coil being connected between the switches on each leg, each full-bridge circuit being connected in parallel wherein each leg is disposed parallel to one another, and the secondary coils connected to a rectifying circuit. An outer loop control circuit that reduces ripple in a voltage reference has a first resistor connected in series with a second resistor connected in series with a first capacitor which are connected in parallel with a second capacitor. An inner loop control circuit that reduces ripple in a current reference has a third resistor connected in series with a fourth resistor connected in series with a third capacitor which are connected in parallel with a fourth capacitor.

  20. Estimation of end of life mobile phones generation: The case study of the Czech Republic

    SciTech Connect (OSTI)

    Polak, Milos, E-mail: mpolak@remasystem.cz; Drapalova, Lenka

    2012-08-15T23:59:59.000Z

    Highlights: Black-Right-Pointing-Pointer In this paper, we define lifespan of mobile phones and estimate their average total lifespan. Black-Right-Pointing-Pointer The estimation of lifespan distribution is based on large sample of EoL mobile phones. Black-Right-Pointing-Pointer Total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. Black-Right-Pointing-Pointer In the years 2010-20, about 26.3 million pieces of EoL mobile phones will be generated in the Czech Republic. - Abstract: The volume of waste electrical and electronic equipment (WEEE) has been rapidly growing in recent years. In the European Union (EU), legislation promoting the collection and recycling of WEEE has been in force since the year 2003. Yet, both current and recently suggested collection targets for WEEE are completely ineffective when it comes to collection and recycling of small WEEE (s-WEEE), with mobile phones as a typical example. Mobile phones are the most sold EEE and at the same time one of appliances with the lowest collection rate. To improve this situation, it is necessary to assess the amount of generated end of life (EoL) mobile phones as precisely as possible. This paper presents a method of assessment of EoL mobile phones generation based on delay model. Within the scope of this paper, the method has been applied on the Czech Republic data. However, this method can be applied also to other EoL appliances in or outside the Czech Republic. Our results show that the average total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. We impute long lifespan particularly to a storage time of EoL mobile phones at households, estimated to be 4.35 years. In the years 1990-2000, only 45 thousands of EoL mobile phones were generated in the Czech Republic, while in the years 2000-2010 the number grew to 6.5 million pieces and it is estimated that in the years 2010-2020 about 26.3 million pieces will be generated. Current European legislation sets targets on collection and recycling of WEEE in general, but no specific collection target for EoL mobile phone exists. In the year 2010 only about 3-6% of Czech EoL mobile phones were collected for recovery and recycling. If we make similar estimation using an estimated average EU value, then within the next 10 years about 1.3 billion of EoL mobile phones would be available for recycling in the EU. This amount contains about 31 tonnes of gold and 325 tonnes of silver. Since Europe is dependent on import of many raw materials, efficient recycling of EoL products could help reduce this dependence. To set a working system of collection, it will be necessary to set new and realistic collection targets.

  1. T-670: Skype Input Validation Flaw in 'mobile phone' Profile Entry Permits Cross-Site Scripting Attacks

    Broader source: Energy.gov [DOE]

    The software does not properly filter HTML code from user-supplied input in the The "mobile phone" profile entry before displaying the input.

  2. Hardwired Control Changes For NSTX DC Power Feeds

    SciTech Connect (OSTI)

    Ramakrishnan, S.

    2013-06-28T23:59:59.000Z

    The National Spherical Torus Experiment (NSTX) has been designed and installed in the existing facilities at Princeton Plasma Physics Laboratory (PPPL). Most of the hardware, plant facilities, auxiliary sub-systems, and power systems originally used for the Tokamak Fusion Test Reactor (TFTR) have been used with suitable modifications to reflect NSTX needs. The original TFTR Hardwired Control System (HCS) with electromechanical relays was used for NSTX DC Power loop control and protection during NSTX operations. As part of the NSTX Upgrade, the HCS is being changed to a PLC-based system with the same control logic. This paper gives a description of the changeover to the new PLC-based system __________________________________________________

  3. Superconducting DC and RF Properties of Ingot Niobium

    E-Print Network [OSTI]

    Dhakal, Pashupati; Kneisel, Peter; Myneni, Ganapati Rao

    2012-01-01T23:59:59.000Z

    The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the influence of chemical and heat-treatment processes on the superconducting properties, with no significant dependence on the impurity concentrations in the original ingots. Furthermore, RF properties, such as the surface resistance and quench field of the niobium rods were measured using a TE011 cavity. The hollow niobium rod is the center conductor of this cavity, converting it to a coaxial cavity. The quench field is limited by the critical heat flux through the rods' cooling channel.

  4. The dc modeling program (DCMP): Version 2. 0

    SciTech Connect (OSTI)

    Chapman, D.G. (Manitoba HVDC Research Centre, Winnipeg, MB (Canada))

    1990-08-01T23:59:59.000Z

    In this project one of the main objectives was the refinement of tools for the study of HVDC systems. The original software was prepared in project RP1964-2 (EL-4365) as power flow and stability program models for HVDC systems. In this project new modeling capabilities were added to both the power flow and stability models. Additionally, the HVDC specific model capabilities were integrated into a new program, termed the Standalone program, for use in the development and testing of HVDC models. This manual provides technical background for programmers and those interested in understanding, augmenting or transporting the dc models.

  5. Positron lifetime spectrometer using a DC positron beam

    DOE Patents [OSTI]

    Xu, Jun; Moxom, Jeremy

    2003-10-21T23:59:59.000Z

    An entrance grid is positioned in the incident beam path of a DC beam positron lifetime spectrometer. The electrical potential difference between the sample and the entrance grid provides simultaneous acceleration of both the primary positrons and the secondary electrons. The result is a reduction in the time spread induced by the energy distribution of the secondary electrons. In addition, the sample, sample holder, entrance grid, and entrance face of the multichannel plate electron detector assembly are made parallel to each other, and are arranged at a tilt angle to the axis of the positron beam to effectively separate the path of the secondary electrons from the path of the incident positrons.

  6. Category:DC Resistivity Survey (Wenner Array) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, click here. Category:Conceptual Model Add.png Add a newpage?InformationDC

  7. EA-327-A DC Energy, LLC | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No53197EFindingEA-257-CEA-296-B22 Emera EnergyEA-326327-A DC

  8. PowerCentsDC Program Final Report | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in235-1Department of60Power Purchase Agreements PowerPowerCentsDC Program

  9. EA-327-A DC Energy, LLC | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015 Business42.1Energy |Final Site-WideBPAPowerEE US No.Subsidary No. 5 LLCtoDC

  10. EA-377 DC Energy Texas | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721 Federal Register / Vol. 73, No.Plant for5: Finding7:11:D3 EDF Trading67 DC

  11. DC Resistivity Survey (Dipole-Dipole Array) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:PowerCER.pngRoofs andCrops Ltd Jump to: navigation, searchDC

  12. Sustainable Energy Utility- D.C. Home Performance (District of Columbia)

    Broader source: Energy.gov [DOE]

    The District of Columbia Sustainable Energy Utility currently offers the D.C. Home Performance program (DCHP). DCHP provides a $500 incentive to properties which successfully complete qualifying...

  13. Washington DC Regions | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Washington DC Regions National Science Bowl (NSB) NSB Home About High School Middle School Middle School Students Middle School Coaches Middle School Regionals Middle School...

  14. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    currently being entirely off-grid is much more costly andcan operate off the DC Flexzone Grid [20] and are developing

  15. Harnessing the Power of the Sun, Solar Impulse Plane Lands in DC Area

    Broader source: Energy.gov [DOE]

    Today, Secretary Moniz spoke at an event welcoming the arrival of the solar-powered Solar Impulse plane at Dulles International Airport near Washington, D.C.

  16. We Have a Winner - DC High School Regional Science Bowl Competition...

    Broader source: Energy.gov (indexed) [DOE]

    We Have a Winner - DC High School Regional Science Bowl Competition Held Last Saturday Annie Whatley Annie Whatley Deputy Director, Office of Minority Education and Community...

  17. Optimization of spin-torque switching using AC and DC pulses

    SciTech Connect (OSTI)

    Dunn, Tom [Department of Physics, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Kamenev, Alex [Department of Physics, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Fine Theoretical Physics Institute, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

    2014-06-21T23:59:59.000Z

    We explore spin-torque induced magnetic reversal in magnetic tunnel junctions using combined AC and DC spin-current pulses. We calculate the optimal pulse times and current strengths for both AC and DC pulses as well as the optimal AC signal frequency, needed to minimize the Joule heat lost during the switching process. The results of this optimization are compared against numeric simulations. Finally, we show how this optimization leads to different dynamic regimes, where switching is optimized by either a purely AC or DC spin-current, or a combination AC/DC spin-current, depending on the anisotropy energies and the spin-current polarization.

  18. Evaluating socio-economic state of a country analyzing airtime credit and mobile phone datasets

    E-Print Network [OSTI]

    Gutierrez, Thoralf; Blondel, Vincent D

    2013-01-01T23:59:59.000Z

    Reliable statistical information is important to make political decisions on a sound basis and to help measure the impact of policies. Unfortunately, statistics offices in developing countries have scarce resources and statistical censuses are therefore conducted sporadically. Based on mobile phone communications and history of airtime credit purchases, we estimate the relative income of individuals, the diversity and inequality of income, and an indicator for socioeconomic segregation for fine-grained regions of an African country. Our study shows how to use mobile phone datasets as a starting point to understand the socio-economic state of a country, which can be especially useful in countries with few resources to conduct large surveys.

  19. Sleep Apnea Monitoring Using Mobile Phones Shamma Alqassim, Madhumeta Ganesh, Shaheen Khoja, Meher Zaidi, Fadi Aloul, Assim Sagahyroon

    E-Print Network [OSTI]

    Aloul, Fadi

    and detect symptoms of sleep apnea using the smart phone's built-in sensors. The purpose of the application-in features and sensors of the phone. However, although helpful, many of these systems do not provide users is estimated to affect 1 in 4 men and 1 in 9 women; it also affects 23 million working adults [5

  20. A Model of Attitudes toward the Acceptance of Mobile Phone Use in Public Places Brenda Mak, San Francisco State University

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    technology with a fast diffusion rate (Kim, 2005). Mobile phones have brought about improvements and Ratten, 2007), and mobile customer relationship management (Moedritscher and Mussnig, 2005), offering1 A Model of Attitudes toward the Acceptance of Mobile Phone Use in Public Places Brenda Mak, San

  1. The National Alliance of Clean Energy Incubators jgroelinger@cleanenergyalliance.com Phone: +1-609-516-7669

    E-Print Network [OSTI]

    Delgado, Mauricio

    The National Alliance of Clean Energy Incubators jgroelinger@cleanenergyalliance.com Phone: +1, Executive Director (phone): 1-609-516-7669; (e-mail): jgroelinger@cleanenergyalliance.com CLEAN ENERGY ALLIANCE AND U.S. DEPARTMENT OF ENERGY LAUNCH PARTNERSHIP TO SUPPORT COMMERCIALIZATION OF CLEAN ENERGY

  2. Waste form development for a DC arc furnace

    SciTech Connect (OSTI)

    Feng, X.; Bloomer, P.E.; Chantaraprachoom, N.; Gong, M.; Lamar, D.A.

    1996-09-01T23:59:59.000Z

    A laboratory crucible study was conducted to develop waste forms to treat nonradioactive simulated {sup 238}Pu heterogeneous debris waste from Savannah River, metal waste from the Idaho National Engineering Laboratory (INEL), and nominal waste also from INEL using DC arc melting. The preliminary results showed that the different waste form compositions had vastly different responses for each processing effect. The reducing condition of DC arc melting had no significant effects on the durability of some waste forms while it decreased the waste form durability from 300 to 700% for other waste forms, which resulted in the failure of some TCLP tests. The right formulations of waste can benefit from devitrification and showed an increase in durability by 40%. Some formulations showed no devitrification effects while others decreased durability by 200%. Increased waste loading also affected waste form behavior, decreasing durability for one waste, increasing durability by 240% for another, and showing no effect for the third waste. All of these responses to the processing and composition variations were dictated by the fundamental glass chemistry and can be adjusted to achieve maximal waste loading, acceptable durability, and desired processing characteristics if each waste formulation is designed for the result according to the glass chemistry.

  3. DC switching regulated power supply for driving an inductive load

    DOE Patents [OSTI]

    Dyer, G.R.

    1983-11-29T23:59:59.000Z

    A dc switching regulated power supply for driving an inductive load is provided. The regulator basic circuit is a bridge arrangement of diodes and transistors. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. A dc power supply is connected to the input of the bridge and the output is connected to the load. A servo controller is provided to control the switching rate of the transistors to maintain a desired current to the load. The regulator may be operated in three stages or modes: (1) for current runup in the load, both first and second transistor switch arrays are turned on and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned off, and load current flywheels through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays off, allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load.

  4. SECONDARY MINERALS FOUND IN CORES DC2 Al AND DC2 TAKEN FROM THE GRANDE RONDE BASALT FORMATION, PASCO BASIN, WASHINGTON

    E-Print Network [OSTI]

    Teague, L.S.

    2010-01-01T23:59:59.000Z

    of secondary and primary mineral phases in basalts of theB. , 1975. Perched silia minerals on mordenite fibers. Jour.lt;. UC—70 I SECONDARY MINERALS FOUND IN CORES DC2 AI AND

  5. Micro-windmills to Power up Your Phone and Posted by By Patty at 25 January, at 17 : 49 PM Print

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    will be used to charge cell phone batteries. The micro windmills generates electric power from ambient wind to recharge a dead phone in just a few minutes. The device's parts are as tiny as a fraction of the diameter.com/micro-windmills-to-power-up-your-phone-and-more #12;Photo by http://blog.zeit.de The micro

  6. Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 277-3112 Fax: 505 277-6927 http://www.cs.unm.edu/~hollan

    E-Print Network [OSTI]

    Mills, Kevin

    UNM NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone;UNM NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 277

  7. DC H2O: What's on Tap? Annual Progress Report for FY 2004

    E-Print Network [OSTI]

    District of Columbia, University of the

    for distributing treated water to DC residents has taken the brunt of the blame and has developed mechanisms. Project resources have secured a GPS unit and additional resources have already been allocated for GIS as a part of the 4-H Youth Cyber Camp. And as such, will incorporate the technological aspects of the DC H2O

  8. Towards Building an Optimal Demand Response Framework for DC Distribution Networks

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    . There- fore, in this paper, the first steps are taken towards designing de- mand response programs, such as photovoltaic (PV) systems, batteries, and fuel cells, that are natively DC sources. H. MohsenianTowards Building an Optimal Demand Response Framework for DC Distribution Networks Hamed Mohsenian

  9. Smith, D.C., et al., 2000 ODP Technical Note 28

    E-Print Network [OSTI]

    Smith, D.C., et al., 2000 ODP Technical Note 28 METHODS FOR QUANTIFYING POTENTIAL MICROBIAL CONTAMINATION DURING DEEP OCEAN CORING 1,2 David C. Smith,3 Arthur J. Spivack,4 Martin R. Fisk,5 Shelley A that these contamination tests be routinely conducted when coring for microbiological studies. 1Smith, D.C., Spivack, A

  10. Genomic Plasticity Enables Phenotypic Variation of Pseudomonas syringae pv. tomato DC3000

    E-Print Network [OSTI]

    Myers, Chris

    Genomic Plasticity Enables Phenotypic Variation of Pseudomonas syringae pv. tomato DC3000 Zhongmeng of a genomic anomaly in the region of 4.7 to 4.9 Mb of the Pseudomonas syringae pv. tomato (Pst) DC3000 genome in P. syringae. Citation: Bao Z, Stodghill PV, Myers CR, Lam H, Wei H-L, et al. (2014) Genomic

  11. Zeroing Transformer's DC Current in Resonant Converters with No Series Capacitors

    E-Print Network [OSTI]

    Gertsman, Student Member, IEEE and Sam Ben-Yaakov ,Fellow, IEEE Power Electronics Laboratory Department: www.ee.bgu.ac.il/~pel Abstract - DC current unbalance in the windings of a transformer may initiate the transformer's DC current to zero by correcting the asymmetry of the drive. This balancing control

  12. Control of Parallel-Connected Bidirectional AC-DC Converters in Stationary Frame for Microgrid

    E-Print Network [OSTI]

    Teodorescu, Remus

    Sistemes Automŕtica i Informŕtica Industrial Universitat Politčcnica de Catalunya Abstract. In this paper, parallel-connected bidirectional converters for AC and DC hybrid microgrid application energy sources [3-6]. A hybrid microgrid can be made up of distributed renewable source, AC and DC common

  13. The Data Center (DC) Genome project is a collaborative effort with Microsoft Research

    E-Print Network [OSTI]

    Amir, Yair

    that IT equipment needs abundant cooling to operate reliably, the CRAC systems in many data centers are set to very, Project Genome: Wireless Sensor Network for Data Center Cooling , The Architecture Journal volume 18, 2009DC Genome The Data Center (DC) Genome project is a collaborative effort with Microsoft Research

  14. PID Control with Derivative Filtering Integral Anti-Windup for a DC Servo

    E-Print Network [OSTI]

    PID Control with Derivative Filtering and Integral Anti-Windup for a DC Servo Nicanor Quijano in the prelab for PID controllers. For that, we use the DC motor for the SRV-02ET to do position control. You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.4 PID Controller with Derivative Filtering

  15. Supervisory Control of an Adaptive-Droop Regulated DC Microgrid with Battery Management

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    such as photovoltaic (PV) systems and secondary batteries. In this paper, several distributed generators (DGs) have1 Supervisory Control of an Adaptive-Droop Regulated DC Microgrid with Battery Management been merged together with a pair of batteries and loads to form an autonomous dc Microgrid (MG

  16. A nonlinear robust HVDC control for a parallel AC/DC power system

    E-Print Network [OSTI]

    Qu, Zhihua

    A nonlinear robust HVDC control for a parallel AC/DC power system Hongzhi Cai a , Zhihua Qu b. Keywords: Robust control; HVDC; Power system; Stability; Lyapunov method 1. Introduction It has been recognized that, through an HVDC transmission line, fast electronic control can be applied on the DC power

  17. CTMCONTROL: Addressing the MC/DC Objective for Safety-Critical Automotive Software

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    CTMCONTROL: Addressing the MC/DC Objective for Safety-Critical Automotive Software Anila Mjeda.mjeda,mike.hinchey}@lero.ie Abstract. We propose a method tailored to the requirements of safety-critical embedded automotive software/DC) objective for automotive safety-critical software. CTMCONTROL is validated via a controlled experiment which

  18. Fabrication of Superhydrophobic Fiber Coatings by DC-Biased AC-Electrospinning

    E-Print Network [OSTI]

    Tafreshi, Hooman Vahedi

    Fabrication of Superhydrophobic Fiber Coatings by DC-Biased AC-Electrospinning Fredrick O. Ochanda DC-biased AC-electrospinning. Superhydrophobic surfaces with water contact angles greater than 150 on superhydrophobicity. VC 2011 Wiley Periodicals, Inc. J Appl Polym Sci 123: 1112­1119, 2012 Key words: superhydrophobic

  19. Fabrication of Superhydrophobic Fiber Coatings by DC-Biased AC-Electrospinning

    E-Print Network [OSTI]

    Tafreshi, Hooman Vahedi

    Fabrication of Superhydrophobic Fiber Coatings by DC-Biased AC-Electrospinning Fredrick O. Ochanda DC-biased AC-electrospinning. Superhydrophobic surfaces with water contact angles greater than 150 Superhydrophobicity is achieved by combining nano- or microscale roughness with a low-surface free energy material

  20. iPoint: A Platform-independent Passive Information Kiosk for Cell Phones

    E-Print Network [OSTI]

    Noubir, Guevara

    communication paradigms and build a prototype of such a system that we call iPoint. In the process of designingiPoint: A Platform-independent Passive Information Kiosk for Cell Phones Hooman Javaheri College@ccs.neu.edu Abstract--We introduce iPoint, a passive device that can interact and deliver information to virtually any

  1. Victoria E. Howle Department of Mathematics & Statistics Phone: (806) 742-2580 ext. 264

    E-Print Network [OSTI]

    Howle, Victoria E.

    Victoria E. Howle Department of Mathematics & Statistics Phone: (806) 742-2580 ext. 264 Texas Tech University Fax: (806) 742-1112 MS1042 E-mail: victoria.howle@ttu.edu Lubbock, TX 79409 http Technical Report SAND2003-2927, Sandia National Laboratories, Albuquerque, New Mexico, August 2003. · S

  2. Development of Multilingual Acoustic Models in the GlobalPhone Project

    E-Print Network [OSTI]

    Schultz, Tanja

    , namely Ara­ bic, Chinese (Mandarin and Wu), Croatian, English, French, German, Japanese, Korean] #words vocabulary Arabic 100 u.w. 20 u.w. u.w. Croatian (+30) 83 4019 14 106K 20K Japanese 121 9785 25 1. The GlobalPhone Database (u.w.=under way) For training and testing we use Croatian, Japanese

  3. SPECIAL HOUSING ACCOMODATION REQUEST FORM SID# Email Address Cell Phone Number

    E-Print Network [OSTI]

    SPECIAL HOUSING ACCOMODATION REQUEST FORM Name SID# Email Address Cell Phone Number Special housing of accommodation. This Special Housing Accommodation Request Form is to be thoroughly completed and returned this documentation. Housing Services will make every attempt to accommodate housing preferences in conjunction

  4. Participatory Sensing in Commerce: Using Mobile Camera Phones to Track Market Price Dispersion

    E-Print Network [OSTI]

    Bulusu, Nirupama

    their choices. Nevertheless, a major cause is the consumer search cost incurred in collecting pricingParticipatory Sensing in Commerce: Using Mobile Camera Phones to Track Market Price Dispersion In economics, price dispersion refers to the price difference of a homogeneous good across different vendors

  5. Business Name Year Address City State Zip Phone Email Address Contact

    E-Print Network [OSTI]

    water heating systems in the Tri-cities and surrounding area 2382 Solar Heating equipment installationBusiness Name Year Founded Address City State Zip Phone Email Address Contact First Name Contact Last Name URL Products/Services NAICS Code NAICS Description Energy Northwest 1957 PO Box 968 Richland

  6. Scheduling for a Modular Activity Recognition System to Reduce Energy Consumption on SmartPhones

    E-Print Network [OSTI]

    Beigl, Michael

    Scheduling for a Modular Activity Recognition System to Reduce Energy Consumption on Smart Computing Systems, Karlsruhe Institute of Technology (KIT) Abstract During the last years, mobile phones the activity recognition is totally switched off for certain periods, the power saving mechanisms native

  7. UCSC Student Health Services Student Health Insurance Office 1156 High Street Phone: (831) 459-2389

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    -line waiver process. Please have your insurance information available before you log-on to the on-line waiver: INSURANCE INFORMATION Ins. Company Name: Ins. Phone #: Member ID #: Group #: Insurance Address: Subscriber from the insurance company or an insurance agent. ** 4. Does your health insurance plan have a pre

  8. A Speech Processing Research Platform for Android Based Smart Phones and Tablets

    E-Print Network [OSTI]

    is called Speech Enhancement for Android (SEA) and incorporates past and present speech enhancement- ing staff can use this platform to perform speech enhancement and observe its effects. Index Terms: speech enhancement, speech processing, spec- trogram, Android, smart phone 1. Introduction

  9. MATH 121 SYLLABUS FALL 1997 Lecture Time Room Instructor Office Phone Call No.

    E-Print Network [OSTI]

    Baldwin, John T.

    Office Phone Call No. MWF 8 LC-D5 Stinespring624 SEO 3-0368 61306 MWF 9 LC-E1 Baldwin 417SEO 3-2149 61231 MWF 9 LC-D4 Gray 508 SEO 6-4828 31494 MWF 2 LC-D4 Tartakoff 516 SEO 6-2440 61440 MWF

  10. METIS: Exploring mobile phone sensing offloading for efficiently supporting social sensing applications

    E-Print Network [OSTI]

    Mascolo, Cecilia

    buildings are instrumented with a variety of sensors, such as RFID access control systems, Passive Infrared on the phone's battery. In this paper, we present the design, implementation, and evaluation of METIS implements a novel sensor task distribution scheme that dynamically decides whether to perform sensing

  11. Using Mobile Phones for Promoting Water Conservation Rahuvaran Pathmanathan1, 2

    E-Print Network [OSTI]

    Pearce, Jon

    of when they were allowed to water their gardens, but there was and is still a lack of knowledge243 Using Mobile Phones for Promoting Water Conservation Rahuvaran Pathmanathan1, 2 , Jon Pearce2@unimelb.edu.au ABSTRACT We report a design investigation that seeks to help people to conserve water in their homes

  12. Oklahoma State University-Tulsa Academic Advising Syllabus Advising Center Phone: 918-594-8271

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    Oklahoma State University-Tulsa Academic Advising Syllabus Advising Center Phone: 918-594-8271 130 North Hall Fax: 918-594-8246 700 N. Greenwood Ave. Hours: M-R, 8 am to 6 pm, F 8 am to 5 pm Tulsa, OK at OSU-Tulsa. OSU-TULSA ACADEMIC ADVISING MISSION STATEMENT The core values of Oklahoma State University-Tulsa

  13. Christiane Jablonowski Phone: 734 763 6238 University of Michigan Fax: 734 936 0503

    E-Print Network [OSTI]

    Jablonowski, Christiane

    Christiane Jablonowski Phone: 734 763 6238 University of Michigan Fax: 734 936 0503 Department ------------------------------------------------------------------------------------------------------------------------------ Associate Professor Sep. 2012 ­ current University of Michigan, Ann Arbor, Michigan Department of Atmospheric, Oceanic & Space Sciences (AOSS) Assistant Professor Sep. 2006 ­ Aug 2012 University of Michigan

  14. Chu-Lin (Mike) Cheng Department of Earth and Planetary Sciences Phone: (865) 974-0075

    E-Print Network [OSTI]

    Perfect, Ed

    , Transport in Porous Media (submitted) Kang, M. E. Perfect, C.L. Cheng, H. Z. Billheux, J. Lee, J. Horita the BC-vG Upscaler, Vadose Zone Journal. doi:10.2136/vzj2012.0174 Kang, M., E. Perfect, C.L. Cheng, H. ZApril 2013 Chu-Lin (Mike) Cheng Department of Earth and Planetary Sciences Phone: (865) 974

  15. NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7

    E-Print Network [OSTI]

    NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7 meeting Cocks Friedman, Randy NW Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW-8553 bdickens@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen

  16. NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector

    E-Print Network [OSTI]

    NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector Cocks, Michael BPA Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW Ind. Gas Users (503@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen@intgas.com Distribution Dahlberg

  17. Dianne Prost O'Leary Computer Science Department Phone: (301) 405-2678

    E-Print Network [OSTI]

    O'Leary, Dianne P.

    Dianne Prost O'Leary Professor Computer Science Department Phone: (301) 405-2678 and Institute Programmer at a university computing center Summer, 1971 April 24, 2014 1 D. P. O'Leary #12;II. Research are organized by field at http://www.cs.umd.edu/users/oleary/res12/. Books Authored [B2] Dianne P. O'Leary

  18. CELL PHONE and BLACKBERRY POLICY and PROCEDURES (Revision 3/18/2009)

    E-Print Network [OSTI]

    Fernandez, Eduardo

    phones or other devices are to (1) disaggregate individual personal usage from business usage; and, (2 for personal use by the employee. Policy The acquisition and use of cellular telephones and BlackBerry devices business and personal call, describing the type of business it relates to, the person called and the amount

  19. Effects of Cell Phone Radiofrequency Signal Exposure on Brain Glucos Metabolism

    SciTech Connect (OSTI)

    Volkow, N.D.; Wang, G.; Volkow, N.D.; Tomasi, D.; Wang, G.-J.; Vaska, P.; Fowler, J.S.; Telang, F.; Alexoff, D.; Logan, J.; Wong, C.

    2011-03-01T23:59:59.000Z

    The dramatic increase in use of cellular telephones has generated concern about possible negative effects of radiofrequency signals delivered to the brain. However, whether acute cell phone exposure affects the human brain is unclear. To evaluate if acute cell phone exposure affects brain glucose metabolism, a marker of brain activity. Randomized crossover study conducted between January 1 and December 31, 2009, at a single US laboratory among 47 healthy participants recruited from the community. Cell phones were placed on the left and right ears and positron emission tomography with ({sup 18}F)fluorodeoxyglucose injection was used to measure brain glucose metabolism twice, once with the right cell phone activated (sound muted) for 50 minutes ('on' condition) and once with both cell phones deactivated ('off' condition). Statistical parametric mapping was used to compare metabolism between on and off conditions using paired t tests, and Pearson linear correlations were used to verify the association of metabolism and estimated amplitude of radiofrequency-modulated electromagnetic waves emitted by the cell phone. Clusters with at least 1000 voxels (volume >8 cm{sup 3}) and P < .05 (corrected for multiple comparisons) were considered significant. Brain glucose metabolism computed as absolute metabolism ({micro}mol/100 g per minute) and as normalized metabolism (region/whole brain). Whole-brain metabolism did not differ between on and off conditions. In contrast, metabolism in the region closest to the antenna (orbitofrontal cortex and temporal pole) was significantly higher for on than off conditions (35.7 vs 33.3 {micro}mol/100 g per minute; mean difference, 2.4 [95% confidence interval, 0.67-4.2]; P = .004). The increases were significantly correlated with the estimated electromagnetic field amplitudes both for absolute metabolism (R = 0.95, P < .001) and normalized metabolism (R = 0.89; P < .001). In healthy participants and compared with no exposure, 50-minute cell phone exposure was associated with increased brain glucose metabolism in the region closest to the antenna. This finding is of unknown clinical significance.

  20. Dynamics of Three-Dimensional Vesicles in DC Electric fields

    E-Print Network [OSTI]

    Ebrahim M. Kolahdouz; David Salac

    2015-03-02T23:59:59.000Z

    A numerical and systematic parameter study of three-dimensional vesicle electrohydrodynamics is presented to investigate the effects of different fluid and membrane properties. The dynamics of vesicles in the presence of DC electric fields is considered, both in the presence and absence of linear shear flow. For suspended vesicles it is shown that the conductivity ratio and viscosity ratio between the interior and exterior fluids, as well as the vesicle membrane capacitance, substantially affect the minimum electric field strength required to induce a full Prolate-Oblate-Prolate transition.In addition, there exists a critical electric field strength above which a vesicle will no longer tumble when exposed to linear shear flow.

  1. Possible temperature control DC switch effect between two superconductors

    E-Print Network [OSTI]

    Tian De Cao

    2011-08-11T23:59:59.000Z

    The lifetime of an electron pair could not be unlimited long, on the basis of this, we suggest a model. The model means that the movements of charge carriers in a superconductor should have three forms: the single-electron movement, the single-pair movement, and the revolving around the mass center of two electrons in a pair. Thus the current in a superconductor has three possible parts. Similarly, there should be three possible effects in a SIS junction: the tunneling of single electron, the tunneling of single pair, and the pair-forming following the pair-breaking. This paper will discuss these problems and present a possible temperature control DC switch effect between two superconductors.

  2. Generating expansion model incorporating compact DC power flow equations

    SciTech Connect (OSTI)

    Nderitu, D.G.; Sparrow, F.T.; Yu, Z. [Purdue Inst. for Interdisciplinary Engineering Studies, West Lafayette, IN (United States)

    1998-12-31T23:59:59.000Z

    This paper presents a compact method of incorporating the spatial dimension into the generation expansion problem. Compact DC power flow equations are used to provide real-power flow coordination equations. Using these equations the marginal contribution of a generator to th total system loss is formulated as a function of that generator`s output. Incorporating these flow equations directly into the MIP formulation of the generator expansion problem results in a model that captures a generator`s true net marginal cost, one that includes both the cost of generation and the cost of transport. This method contrasts with other methods that iterate between a generator expansion model and an optimal power flow model. The proposed model is very compact and has very good convergence performance. A case study with data from Kenya is used to provide a practical application to the model.

  3. Superconducting DC and RF Properties of Ingot Niobium

    SciTech Connect (OSTI)

    Pashupati Dhakal, Gianluigi Ciovati, Peter Kneisel, Ganapati Rao Myneni

    2011-07-01T23:59:59.000Z

    The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the influence of chemical and heat-treatment processes on the superconducting properties, with no significant dependence on the impurity concentrations in the original ingots. Furthermore, RF properties, such as the surface resistance and quench field of the niobium rods were measured using a TE{sub 011} cavity. The hollow niobium rod is the center conductor of this cavity, converting it to a coaxial cavity. The quench field is limited by the critical heat flux through the rods' cooling channel.

  4. Thermal cum DC Camouflage in Duet with Undecorated Natural Materials

    E-Print Network [OSTI]

    Yang, Tian-Zhi; Gao, Dongliang; Wu, Linzhi; Li, Baowen; Thong, John T L; Qiu, Cheng-Wei

    2015-01-01T23:59:59.000Z

    To manipulate various types of physical signals in one single device has long captivated the attention of scientists and engineers. This however is very challenging, if not impossible, even for emerging metamaterials. Up to date, many artificial materials have been proposed, theoretically and (or) experimentally, for manipulating various waves/signals on a one-function-one-device basis. In this work, for the very first time, we employ undecorated natural materials to experimentally demonstrate a simultaneous camouflage for thermal current and electric dc current on the same device. It demonstrates how ingenuity can overcome the limitations of natural material systems without the need for complex decoration to impart inhomogeneous and (or) anisotropic properties, which was previously considered impossible to accomplish except by using metamaterials.

  5. Discharging a DC bus capacitor of an electrical converter system

    DOE Patents [OSTI]

    Kajouke, Lateef A; Perisic, Milun; Ransom, Ray M

    2014-10-14T23:59:59.000Z

    A system and method of discharging a bus capacitor of a bidirectional matrix converter of a vehicle are presented here. The method begins by electrically shorting the AC interface of the converter after an AC energy source is disconnected from the AC interface. The method continues by arranging a plurality of switching elements of a second energy conversion module into a discharge configuration to establish an electrical current path from a first terminal of an isolation module, through an inductive element, and to a second terminal of the isolation module. The method also modulates a plurality of switching elements of a first energy conversion module, while maintaining the discharge configuration of the second energy conversion module, to at least partially discharge a DC bus capacitor.

  6. Reduction of DC-link Capacitor in Case of Cascade Multilevel Converters by means of Reactive Power

    E-Print Network [OSTI]

    Teodorescu, Remus

    to integrate wind generator to multi- terminal dc collection network are few such examples. The basic block

  7. Development of Low-Voltage and Large Current DC Power Supply with High-Frequency Transformer Coupling

    E-Print Network [OSTI]

    Fujimoto, Hiroshi

    Development of Low-Voltage and Large Current DC Power Supply with High-Frequency Transformer excellent performance. Keywords DC power supply, low-voltage and large-current, high-frequency transformer Iobe (MACOHO Co., Ltd.) Abstract This paper describes low-voltage and large-current DC power supplies

  8. 4/2/2014 RevolutionaryMiniscule Windmills to Recharge Cell phones -Researchmoz http://www.researchmoz.us/article/revolutionary-miniscule-windmills-to-recharge-cell-phones 1/1

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Cell phones Similar Industry Reports: Heat Recovery Steam Generators (HRSGs) for Thermal Power, 2014 be made in bulk using batch processes and so, the price for fabricating a single unit of it w ill be same

  9. Impact of quasi-dc currents on three-phase distribution transformer installations

    SciTech Connect (OSTI)

    McConnell, B.W.; Barnes, P.R. (Oak Ridge National Lab., TN (United States)); Tesche, F.M. (Tesche (F.M.), Dallas, TX (United States)); Schafer, D.A. (Mission Research Corp., Albuquerque, NM (United States))

    1992-06-01T23:59:59.000Z

    This report summarizes a series of tests designed to determine the response of quasi-dc currents on three-phase power distribution transformers for electric power systems. In general, if the dc injection is limited to the primary side of a step-down transformer, significant harmonic distortion is noted and an increase in the reactive power demand results. For dc injection on the secondary (load) side of the step-down transformer the harmonic content at the secondary side is quite high and saturation occurs with a relatively low level of dc injection; however, the reactive power demand is significantly lower. These tests produced no apparent damage to the transformers. Transformer damage is dependent on the duration of the dc excitation, the level of the excitation, and on thermal characteristics of the transfer. The transformer response time is found to be much shorter than seen in power transformer tests at lower dc injection levels. This shorter response time suggests that the response time is strongly dependent on the injected current levels, and that higher levels of dc injection for shorter durations could produce very high reactive power demands and harmonic distortion within a few tenths of a second. The added reactive power load could result in the blowing of fuses on the primary side of the transformer for even moderate dc injection levels, and neutral currents are quite large under even low-level dc injection. This smoking neutral'' results in high-level harmonic injection into equipment via the neutral and in possible equipment failure.

  10. The smoothing transformer, a new concept in dc side harmonic reduction of HVdc schemes

    SciTech Connect (OSTI)

    Enright, W.; Arrillaga, J.; Wood, A.R.; Hidalgo, F.P.

    1996-10-01T23:59:59.000Z

    Direct connection schemes have been a subject of recent investigation, offering operational flexibility and substantial reductions in ac components. In these schemes the use of active dc filters has been suggested to replace the conventional tuned passive filter design. This paper presents the smoothing transformer as a new means for reducing dc harmonics at characteristic and non-characteristic frequencies using only passive components. A realistic smoothing transformer design is examined using the New Zealand HVdc system operating in the direct connection mode. The steady-state and transient performance of the smoothing transformer design is compared with that of the existing dc smoothing reactor and filter bank.

  11. Department Name Title Phone Email HOD -Main Paul Speer Associate Professor 322-3117 paul.w.speer@vanderbilt.edu

    E-Print Network [OSTI]

    Bordenstein, Seth

    Department Name Title Phone Email HOD - Main Paul Speer Associate Professor 322-3117 paul.w.speer@vanderbilt.edu HOD - Community Leadership Paul Speer Associate Professor 322-3117 paul.w.speer@vanderbilt.edu HOD

  12. THERMAL SKIN DAMAGE AND MOBILE PHONE USE Elmountacer Billah Elabbassi(1)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    in thé phone by thé battery currents and running of thé radiofrequency (RF) electronic circuits measured thé température of thé temporal skin due to GSM 1800 MHz MP radiated power (125 mW). To perforai a substantial part of thé radiated power is absorbed. Many epidemiological investigations of MP users [1, 2

  13. Thermodynamic and quantum bounds on nonlinear DC thermoelectric transport

    E-Print Network [OSTI]

    Robert S. Whitney

    2013-03-05T23:59:59.000Z

    I consider the non-equilibrium DC transport of electrons through a quantum system with a thermoelectric response. This system may be any nanostructure or molecule modeled by the nonlinear scattering theory which includes Hartree-like electrostatic interactions exactly, and certain dynamic interaction effects (decoherence and relaxation) phenomenologically. This theory is believed to be a reasonable model when single-electron charging effects are negligible. I derive three fundamental bounds for such quantum systems coupled to multiple macroscopic reservoirs, one of which may be superconducting. These bounds affect nonlinear heating (such as Joule heating), work and entropy production. Two bounds correspond to the first law and second law of thermodynamics in classical physics. The third bound is quantum (wavelength dependent), and is as important as the thermodynamic ones in limiting the capabilities of mesoscopic heat-engines and refrigerators. The quantum bound also leads to Nernst's unattainability principle that the quantum system cannot cool a reservoir to absolute zero in a finite time, although it can get exponentially close.

  14. DC switching regulated power supply for driving an inductive load

    DOE Patents [OSTI]

    Dyer, George R. (Norris, TN)

    1986-01-01T23:59:59.000Z

    A power supply for driving an inductive load current from a dc power supply hrough a regulator circuit including a bridge arrangement of diodes and switching transistors controlled by a servo controller which regulates switching in response to the load current to maintain a selected load current. First and second opposite legs of the bridge are formed by first and second parallel-connected transistor arrays, respectively, while the third and fourth legs of the bridge are formed by appropriately connected first and second parallel connected diode arrays, respectively. The regulator may be operated in three "stages" or modes: (1) For current runup in the load, both first and second transistor switch arrays are turned "on" and current is supplied to the load through both transistor arrays. (2) When load current reaches the desired level, the first switch is turned "off", and load current "flywheels" through the second switch array and the fourth leg diode array connecting the second switch array in series with the load. Current is maintained by alternating between modes 1 and 2 at a suitable duty cycle and switching rate set by the controller. (3) Rapid current rundown is accomplished by turning both switch arrays "off", allowing load current to be dumped back into the source through the third and fourth diode arrays connecting the source in series opposition with the load to recover energy from the inductive load. The three operating states are controlled automatically by the controller.

  15. A Very Low-Luminosity, Very Cool, DC White Dwarf

    E-Print Network [OSTI]

    Hugh Harris; Conard Dahn; Frederick Vrba; Arne Henden; James Liebert; Gary Schmidt; Neill Reid

    1999-06-03T23:59:59.000Z

    The star LHS 3250 is found to be a white dwarf at a distance of 30 pc. Its absolute magnitudes (M_V = 15.72; M_bol = 16.2) put it among the least-luminous white dwarfs known. Its optical spectrum shows no features, indicating it has a DC classification, and it shows no detectable polarization, indicating it does not have a very strong magnetic field. However, its broadband colors show it to have a unique spectral energy distribution, and it stands out from all other stars in BVI and other broadband photometric surveys. We discuss these properties, and conclude that LHS 3250 must be an extremely cool white dwarf with strong collision-induced absorption at red-infrared wavelengths from molecular hydrogen, in accord with models for very cool white dwarf atmospheres. If so, it is the first such star known, and the first star to provide observational evidence supporting these models. It suggests that other very cool white dwarfs, both halo white dwarfs and the oldest disk white dwarfs, also may have colors affected by similar absorption. The atmospheric composition of LHS 3250 is not known, and therefore its temperature is poorly determined. It may be a helium-core star with a mass 0.3-0.45 M_solar and a product of mass-transfer in a close binary system. However, until its temperature is better known, its mass and age remain uncertain.

  16. Multilevel-Dc-Bus Inverter For Providing Sinusoidal And Pwm Electrical Machine Voltages

    DOE Patents [OSTI]

    Su, Gui-Jia [Knoxville, TN

    2005-11-29T23:59:59.000Z

    A circuit for controlling an ac machine comprises a full bridge network of commutation switches which are connected to supply current for a corresponding voltage phase to the stator windings, a plurality of diodes, each in parallel connection to a respective one of the commutation switches, a plurality of dc source connections providing a multi-level dc bus for the full bridge network of commutation switches to produce sinusoidal voltages or PWM signals, and a controller connected for control of said dc source connections and said full bridge network of commutation switches to output substantially sinusoidal voltages to the stator windings. With the invention, the number of semiconductor switches is reduced to m+3 for a multi-level dc bus having m levels. A method of machine control is also disclosed.

  17. Development and evaluation of an implantable chronic DC stimulation and measurement probe for nerve regeneration studies 

    E-Print Network [OSTI]

    Macha, Douglas Bryan

    1995-01-01T23:59:59.000Z

    isotropic. The actual field strength or current density induced by the applied current is seldom directly measured in-vivo. This research seeks to evaluate the design of an implantable DC stimulator capable of delivering a constant, stable and measurable...

  18. ReHABit : claiming endangered structures in Washington DC to rethink subsidized housing

    E-Print Network [OSTI]

    Fowlkes, Catherine Kuhnle

    2007-01-01T23:59:59.000Z

    There is an affordable housing crisis today in Washington D.C. that is the result of a uniquely complicated history of a capital city and a current economic boom. This thesis responds to that crisis by proposing a new ...

  19. Measured Savings of DC to AC Drive Retrofit in Plastic Extrusion

    E-Print Network [OSTI]

    Sfeir, R. A.

    2008-01-01T23:59:59.000Z

    This paper presents the potential electrical energy efficiency improvements for utilizing alternating current (AC) motors controlled by variable frequency drives (VFD) in place of direct current (DC) motors to drive plastic extrusion machines. A...

  20. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    Model Efficiency a PV Inverter (AC House), includes MPPT DC-into today’s PV-system inverters and is therefore omittedinterviewed. c Today’s PV-system inverter minus the MPPT,

  1. D.C. Middle and High School Students Get a Chance to Experience...

    Broader source: Energy.gov (indexed) [DOE]

    and Community Development Have you ever heard of the Washington, D.C. regional science bowl competition? Are you a teacher or a middle or high school student looking for...

  2. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    a-vis the impact of partial loads on power system componentto test the effect of partial load conditions and possibleto direct-DC savings. Partial load effects reduce estimates

  3. Vehicle Technologies Office Merit Review 2015: High Performance DC Bus Film Capacitor

    Broader source: Energy.gov [DOE]

    Presentation given by GE Global Research at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

  4. Over-Current Protection Scheme for SiC Power MOSFET DC Circuit Breaker

    E-Print Network [OSTI]

    Zhang, Yuan; Liang, Yung C.

    2015-01-01T23:59:59.000Z

    V. Radun, “SiC based solid state power controller,” in 23tha solid-state circuit breaker based on SiC power MOSFET withSolid-state DC circuit breakers made of the modern wide bandgap power

  5. Application to Export Electric Energy OE Docket No. EA-351 DC...

    Broader source: Energy.gov (indexed) [DOE]

    DC Energy Dakota, LLC Application to export electric energy OE Docket No. EA-210-B PPL EnergyPlus, LLC Application to Export Electric Energy OE Docket No. EA-354 Endure...

  6. Low speed control of a DC motor driving a mechanical system with fuzzy adaptive compensation 

    E-Print Network [OSTI]

    Hyun, Dongyoon

    1997-01-01T23:59:59.000Z

    A fuzzy adaptive feedforward control scheme in conjunction with classical feedback control is proposed for the low speed control of DC motors driving mechanical systems in the presence of friction. In the fuzzy adaptive scheme, a fuzzy logic based...

  7. Washington, D.C. : essays on the city form of a capital

    E-Print Network [OSTI]

    Kousoulas, George

    1985-01-01T23:59:59.000Z

    This thesis is an exploration of the city form of Washington. D.C. through four independent essays. Each essay examines a different aspect of the city: its monumentality as determined by its relationship with the nation ...

  8. DC-OPF Formulation with Price-Sensitive Demand Bids Junjie Sun and Leigh Tesfatsion

    E-Print Network [OSTI]

    Tesfatsion, Leigh

    DC-OPF Formulation with Price-Sensitive Demand Bids Junjie Sun and Leigh Tesfatsion Last Revised (TNCS) subject to various transmission constraints. As explained at length in Sun and Tesfation (2007

  9. Vehicle Technologies Office Merit Review 2014: High Performance DC Bus Film Capacitor

    Broader source: Energy.gov [DOE]

    Presentation given by GE Global Research at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about high performance DC bus...

  10. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    E-Print Network [OSTI]

    Garbesi, Karina

    2012-01-01T23:59:59.000Z

    wind/fuel cell hybrid energy systems. Energy and Buildings,National Energy Modeling System PHEV plug-in hybrid electrica hybrid DC and AC power system that included energy storage

  11. Effects of stray DC currents on the performance of large core type transformers

    SciTech Connect (OSTI)

    Christini, J.M.; Girgis, R.S. (ABB Power and Company, Inc., Muncie, IN (US))

    1992-01-01T23:59:59.000Z

    This paper presents the results of a study made on the effects of stray DC current on power transformer performance. A circuit model was developed to analyze the magnetic behavior of three-phase five-leg core type transformers. The magnetic field distribution was obtained for several different operating conditions by taking into account core geometry, core design, magnitude of D.C. current, and magnitude of A.C. voltage. The change in transformer performance is discussed.

  12. Nonlinear modal interaction in HVDC/AC power systems with dc power modulation

    SciTech Connect (OSTI)

    Ni, Y.X. [Tsinghua Univ., Beijing (China)] [Tsinghua Univ., Beijing (China); Vittal, V.; Kliemann, W.; Fouad, A.A. [Iowa State Univ., Ames, IA (United States)] [Iowa State Univ., Ames, IA (United States)

    1996-11-01T23:59:59.000Z

    In this paper investigation of nonlinear modal interaction using the normal form of vector fields technique is extended to HVDC/AC power systems with dc power modulation. The ac-dc interface equations are solved to form a state space model with second order approximation. Using the normal form technique, the system`s nonlinear dynamic characteristics are obtained. The proposed approach is applied to a 4-generator HVDC/AC test power system, and compare with the time domain solution.

  13. Gaseous and particulate emissions from a DC arc melter

    SciTech Connect (OSTI)

    Overcamp, T.J.; Speer, M.P.; Griner, S.J.; Cash, D.M. [Clemson Univ., Anderson, SC (United States)

    1997-12-31T23:59:59.000Z

    This paper presents the results of the gaseous and particulate emissions from eight experimental tests of a DC arc melter to treat simulated Savannah River soils contaminated with metals, surrogates for radionuclides, and organic debris. The gaseous analyses reported on the concentrations of oxygen, hydrogen, carbon monoxide, carbon dioxide, hydrogen, methane, nitric oxide, and nitrogen dioxide. The carbon dioxide concentration was high for all runs. For the runs with an air purge, the carbon monoxide concentration ranged up to 10% in the runs with the debris and 2% in the runs without debris. Hydrogen ranged up to 5% by with debris and up to 1% without debris. The methane concentration ranged up to 7,000 ppm{sub v} for the runs with debris and 2,000 ppm for the runs without debris. With a nitrogen purge, oxygen concentrations were less than 1%. The carbon dioxide concentrations ranged from 3 to 15%. Much of this carbon dioxide was probably due the carbonates added to the feed material. The carbon monoxide concentration ranged up to 20% with the debris and 7% without debris. Hydrogen was above 6% in with debris and up to 6% without debris. The methane concentration ranged up to 10,000 ppm{sub v} with debris and 4,000 ppm{sub v} without debris. The particulate concentrations exiting ranged from 32 to 145 g/m{sup 3}. From the chemical analyses, the primary elements were silicon and calcium. The CHN analyses indicated that carbon, probably as carbonates, are an additional component in the particulate matter. The estimated emissions were at a level of 3% or less for cerium, up to 7% for nickel, and 11 to 30% for cesium.

  14. Optimizing Energy Savings from Direct-DC in U.S. Residential Buildings

    SciTech Connect (OSTI)

    Garbesi, Karina; Vossos, Vagelis; Sanstad, Alan; Burch, Gabriel

    2011-10-13T23:59:59.000Z

    An increasing number of energy efficient appliances operate on direct current (DC) internally, offering the potential to use DC from renewable energy systems directly and avoiding the losses inherent in converting power to alternating current (AC) and back. This paper investigates that potential for net-metered residences with on-site photovoltaics (PV) by modeling the net power draw of the ‘direct-DC house’ with respect to today’s typical configuration, assuming identical DC-internal loads. Power draws were modeled for houses in 14 U.S. cities, using hourly, simulated PV-system output and residential loads. The latter were adjusted to reflect a 33% load reduction, representative of the most efficient DC-internal technology, based on an analysis of 32 electricity end-uses. The model tested the effect of climate, electric vehicle (EV) loads, electricity storage, and load shifting on electricity savings; a sensitivity analysis was conducted to determine how future changes in the efficiencies of power system components might affect savings potential. Based on this work, we estimate that net-metered PV residences could save 5% of their total electricity load for houses without storage and 14% for houses with storage. Based on residential PV penetration projections for year 2035 obtained from the National Energy Modeling System (2.7% for the reference case and 11.2% for the extended policy case), direct-DC could save the nation 10 trillion Btu (without storage) or 40 trillion Btu (with storage). Shifting the cooling load by two hours earlier in the day (pre-cooling) has negligible benefits for energy savings. Direct-DC provides no energy savings benefits for EV charging, to the extent that charging occurs at night. However, if charging occurred during the day, for example with employees charging while at work, the benefits would be large. Direct-DC energy savings are sensitive to power system and appliance conversion efficiencies but are not significantly influenced by climate. While direct-DC for residential applications will most likely arise as a spin-off of developments in the commercial sector—because of lower barriers to market entry and larger energy benefits resulting from the higher coincidence between load and insolation—this paper demonstrates that there are substantial benefits in the residential sector as well. Among residential applications, space cooling derives the largest energy savings from being delivered by a direct-DC system. It is the largest load for the average residence on a national basis and is particularly so in high-load regions. It is also the load with highest solar coincidence.

  15. Development of Low-Voltage and Large-Current DC Power Supply with High-Frequency Transformer Coupling

    E-Print Network [OSTI]

    Fujimoto, Hiroshi

    Development of Low-Voltage and Large-Current DC Power Supply with High-Frequency Transformer-voltage and large-current DC power supply with a high-frequency transformer coupling. The power supply is simply·,Zü"gg"X·C~R,êC"_N^"X Keywords: DC power supply, low-voltage and large-current, high-frequency transformer, leakage inductance 1

  16. Plasma Chemistry and Plasma Processing, Vol. 23, No. 1, March 2003 ( 2003) Model of the Negative DC Corona Plasma

    E-Print Network [OSTI]

    Chen, Junhong

    Plasma Chemistry and Plasma Processing, Vol. 23, No. 1, March 2003 ( 2003) Model of the Negative DC Corona Plasma: Comparison to the Positive DC Corona Plasma Junhong Chen1 and Jane H. Davidson1,2 Receiûed March 26, 2002, reûised June 14, 2002 A numerical model of the negatiûe DC corona plasma along a thin

  17. Development of 500 kV DC PPLP-insulated oil-filled submarine cable

    SciTech Connect (OSTI)

    Fujimori, A. [Kansai Electric Power Co., Inc., Osaka (Japan)] [Kansai Electric Power Co., Inc., Osaka (Japan); Tanaka, T. [Electric Power Development Co., Ltd., Tokyo (Japan)] [Electric Power Development Co., Ltd., Tokyo (Japan); Takashima, H. [Shikoku Electric Power Co., Inc., Kagawa (Japan)] [Shikoku Electric Power Co., Inc., Kagawa (Japan); Imajo, T. [Central Research Inst. of Electric Power Industry, Tokyo (Japan)] [Central Research Inst. of Electric Power Industry, Tokyo (Japan); Hata, R. [Sumitomo Electric Industries, Ltd., Osaka (Japan)] [Sumitomo Electric Industries, Ltd., Osaka (Japan); Tanabe, T. [Furukawa Electric Co., Ltd., Tokyo (Japan)] [Furukawa Electric Co., Ltd., Tokyo (Japan); Yoshida, S. [Fujikura, Ltd., Tokyo (Japan)] [Fujikura, Ltd., Tokyo (Japan); Kakihana, T. [Hitachi Cable, Ltd., Tokyo (Japan)] [Hitachi Cable, Ltd., Tokyo (Japan)

    1996-01-01T23:59:59.000Z

    This paper outlines the development of a 500 kV DC oil-filled submarine cable capable of transmitting 2,800 MW with {+-} 500 kV 2800A bipole system. Polypropylene Laminated Paper (PPL) was employed as the insulation material, which is the worlds first application to DC cables. The conductor size is 3,000 mm{sup 2}, which is the largest size for submarine cables ever put into practical use. Through various fundamental and prototype tests, the cable proved to have excellent electrical characteristics for DC voltage as well as transient overvoltage. The cable and accessories are currently undergoing a long-term accelerated aging test as the final confirmation of their reliability and stability.

  18. Solid Silicone Elastomer Material(DC745U)-Historical Overview and New Experimental Results

    SciTech Connect (OSTI)

    Ortiz-Acosta, Denisse [Los Alamos National Laboratory

    2012-08-08T23:59:59.000Z

    DC745U is a silicone elastomer used in several weapon systems. DC745U is manufactured by Dow Corning and its formulation is proprietary. Risk changes without notification to the customer. {sup 1}H and {sup 29}Si{l_brace}{sup 1}H{r_brace} NMR have previously determined that DC745U contains {approx} 98.5% dimethyl siloxane, {approx}1.5% methyl-phenyl siloxane, and a small amount (<1%) of vinyl siloxane repeat units that are converted to crosslinking sites. The polymer is filled with {approx} 38 wt.% of a mixture of fumed silica and quartz. Some conclusions are: (1) DMA shows that crystallization does have an effect on the mechanical properties of DC745U; (2) DMA shows that the crystallization is time and temperature dependent; (3) Mechanical tests show that DC745U undergo a crystalline transition at temperatures below -50 C; (4) Rate and temperature does not have an effect above crystalline transition; (5) Crystalline transition occurs faster at colder temperatures; (6) The material remains responsive and recovers after warming it to temperature above -40 C; (7) We were able to review all previous historical data on DC745U; (8) Identified specific gaps in materials understanding; (9) Developed design of experiments and testing methods to address gaps associated with post-curing and low temperature mechanical behavior; (10) Resolved questions of post-cure and alleviated concerns associated with low temperature mechanical behavior with soak time and temperature; and (11) This work is relevant to mission-critical programs and for supporting programmatic work for weapon research.

  19. Phone (312) 996-8098 Fax (312) 996-4394 tutorium@uic.edu www.uic.edu/depts/tie Tutorium in Intensive English (MC 324)

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Phone (312) 996-8098 Fax (312) 996-4394 tutorium@uic.edu www.uic.edu/depts/tie Tutorium to the map on the reverse side for directions to UIC. #12;Phone (312) 996-8098 Fax (312) 996-4394 tutorium

  20. SVR vs MLP for Phone Duration Modelling in HMM-based Speech Synthesis Alexandros Lazaridis, Pierre-Edouard Honnet, Philip N. Garner

    E-Print Network [OSTI]

    , 7]. Over the last years, many im- provements have been introduced in HMM-based speech syn- thesis models of multiple levels, e.g. state and phone levels [13], state, phone and syllable levels [14], using full covariance Gaussian distribu- tion [15] or implementing Gamma distribution instead of Gaus- sian

  1. Phone: (765) 494-5146 E-mail: environment@purdue.edu Web: http://www.purdue.edu/DP/environment Center for the Environment

    E-Print Network [OSTI]

    " Phone: (765) 494-5146 · E-mail: environment@purdue.edu · Web: http overlapping aspects of the environmental challenges facing the world today. By emphasizing the deep connection-making and behavior #12;" " Phone: (765) 494-5146 · E-mail: environment@purdue.edu · Web: http

  2. Stabilizing sliding mode control design and application for a dc motor: Speed control

    E-Print Network [OSTI]

    Rhif, Ahmed

    2012-01-01T23:59:59.000Z

    The regulation by sliding mode control (SMC) is recognized for its qualities of robustness and dynamic response. This article will briefly talk about the regulation principles by sliding mode as well as the application of this approach to the adjustment of a speed control DC motor bench using the TY36A/EV unit. This unit, from Electronica Veneta products, uses a PID controller to control the speed and position of the DC motor. Our purpose is to improve the set time answer and the robustness of the system when disturbances take place. The experimental results show very good performances of the proposed approach relatively to the PID.

  3. New Power Electronics Converter Interfacing a Hybrid Dc/Ac Microgrid M. Alibeik, E. C. dos Santos Jr.

    E-Print Network [OSTI]

    Zhou, Yaoqi

    New Power Electronics Converter Interfacing a Hybrid Dc/Ac Microgrid M. Alibeik, E. C. dos Santos microgrid is that it has higher efficiency and lesser power conversion. In this work is proposed a new integrated power electronics converter able to connect a Distributed Generation (DG) unit with a hybrid dc

  4. Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources. In the current power

    E-Print Network [OSTI]

    Tolbert, Leon M.

    Abstract--Environmentally friendly technologies such as photovoltaics and fuel cells are DC sources in pollution [1]. The most well-known green technologies include photovoltaics and wind turbines. Although fuel, fuel cells and photovoltaics, produce direct current (DC). Currently, power system infrastructures

  5. Ver.2003.01.27 Development of Low-Voltage and Large-Current DC Power Supply

    E-Print Network [OSTI]

    Fujimoto, Hiroshi

    describes low-voltage and large-current DC power supplies with a high-frequency transformer coupling. Two Ver.2003.01.27 Development of Low-Voltage and Large-Current DC Power Supply-bridge inverter, an amorphous-core step down transformer and a schottky diode rectifier. One power supply operates

  6. Control of current and voltage oscillations in a short dc discharge making use of external auxiliary electrode

    E-Print Network [OSTI]

    Kaganovich, Igor

    Control of current and voltage oscillations in a short dc discharge making use of external://rsi.aip.org/about/rights_and_permissions #12;REVIEW OF SCIENTIFIC INSTRUMENTS 83, 103502 (2012) Control of current and voltage oscillations October 2012) A dc discharge with a hot cathode is subject to current and voltage plasma oscillations

  7. Dynamic magnetization states of a spin valve in the presence of dc and ac currents: Synchronization, modification, and chaos

    E-Print Network [OSTI]

    Li, Charles

    Dynamic magnetization states of a spin valve in the presence of dc and ac currents: Synchronization and numerical calculations of dynamic magnetization states of a spin valve in the presence of dc and ac currents are expected to appear. In this paper, we consider a simple spin valve as a model system to study the problem

  8. The DC field components of horizontal and vertical electric dipole sources immersed in three-layered stratified media

    E-Print Network [OSTI]

    Boyer, Edmond

    for the solution in the case of horizontal electric dipole (HED) radiation source and the single-component HertzThe DC field components of horizontal and vertical electric dipole sources immersed in three- ponents of the static (DC) fields of horizontal electric dipoles ( HEDs) and vertical electric dipoles

  9. Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004. OAK RIDGE NATIONAL LABORATORY

    E-Print Network [OSTI]

    Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 27-29, 2004. OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY American Superconductor Corporation U. Schoop, M. W&D support #12;Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 27-29, 2004

  10. ccsd00002041, A study of magnetically-supported dc discharge in

    E-Print Network [OSTI]

    essential condition for the technological progress in this branch. The magnetron systems with cylindrical. To prevent overheating the coils and cathode, the system is cooled by water. The apparatus is constructed of magnetically-supported dc discharge in cylindrical coaxial con#12;guration. In the system the electric #12;eld

  11. HIDDEN DAMAGE DETECTION FOR MAIN CABLES OF SUSPENSION BRIDGES INCORPORATING DC MAGNETIZATION WITH A SEARCH COIL-

    E-Print Network [OSTI]

    Boyer, Edmond

    with artificially inflicted broken wires. KEYWORDS : Cable NDE, Search coil, Total flux, DC magnetization, Damage. To overcome this limitation, this study proposes a noncontact cable inspection system incorporating been applied for the inspection of steel cables for ski lifts, elevators, and for other applications

  12. IEEE Photovoltaic Specialists Conference Washington, D.C., May 13-17, 1996

    E-Print Network [OSTI]

    Perez, Richard R.

    IEEE Photovoltaic Specialists Conference Washington, D.C., May 13-17, 1996 NICHE MARKETS FOR GRID-CONNECTED PHOTOVOLTAICS Howard Wenger Pacific Energy Group Walnut Creek, CA, USA Christy Herig & Roger Taylor National- Sited Photovoltaics (CSPV) in the United States. 1 The intent is to demonstrate markets that are cost

  13. Proceedings IEEE International Test Conference, Washington, DC, 1990 Generating Pseudo-Exhaustive Vectors for External Testing

    E-Print Network [OSTI]

    Hellebrand, Sybille

    Proceedings IEEE International Test Conference, Washington, DC, 1990 Generating Pseudo-Exhaustive Vectors for External Testing S. Hellebrand, H.-J. Wunderlich, O. F. Haberl Institute of Computer Design. Germany Abstract In the past years special chips for external test have been suc- cessfully used

  14. Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith

    E-Print Network [OSTI]

    Skogestad, Sigurd

    Control of a Fuel-Cell Powered DC Electric Vehicle Motor Federico Zenith Sigurd Skogestad Introduction Research in fuel cells receives currently a lot of interest. Fuel cells can be used, in different. However, the dynamics of fuel cells has received comparatively less attention. Control of fuel cells

  15. SEC Training -Risk Management Washington, D.C., February 27, 2006

    E-Print Network [OSTI]

    Frey, Robert J.

    SEC Training - Risk Management Washington, D.C., February 27, 2006 Robert J. Frey, Ph.D. Director Managers, pp. IV-3 to IV-9 · Market Risk · Liquidity Risk · Credit Risk · Leverage Risk · Operational Risk · Valuation Risk 10 #12;Monitoring Risk Source: MFA's 2005 Sound Practices for Hedge Fund Managers, pp. AI-1

  16. Griffith 5/2004 UDP-Glucose Dehydrogenase (DH) & UDP-Glucuronic Acid Decarboxylase (DC) Assays

    E-Print Network [OSTI]

    Doering, Tamara

    mM pyruvate solution (Sigma) Lactic acid dehydrogenase (LDH) Phenol pH 4/chloroform/water (0Griffith 5/2004 UDP-Glucose Dehydrogenase (DH) & UDP-Glucuronic Acid Decarboxylase (DC) Assays are looking at interconversion of nucleotide sugars. The LDH and lactic acid dehydrogenase are included

  17. Microprocessor-based random PWM schemes for DC-AC power conversion

    SciTech Connect (OSTI)

    Hui, S.Y.R. [Univ. of Sydney, New South Wales (Australia). Dept. of Electrical Engineering] [Univ. of Sydney, New South Wales (Australia). Dept. of Electrical Engineering; [City Univ. of Hong Kong, Kowloon (Hong Kong). Dept. of Electronic Engineering; Oppermann, I.; Sathiakumar, S. [Univ. of Sydney, New South Wales (Australia). Dept. of Electrical Engineering] [Univ. of Sydney, New South Wales (Australia). Dept. of Electrical Engineering

    1997-03-01T23:59:59.000Z

    Two classes of microprocessor-based random PWM (RPWM) real-time schemes for dc-ac power conversion are compared and evaluated. Performance of the RPWM schemes based on the mathematical and logical approaches is examined. The proposed schemes exhibit excellent harmonic content with all low and high-order harmonics suppressed and are suitable for both MOSFET and IGBT inverters.

  18. February 2012 Did you know that the Navy Memorial in Washington D.C. is

    E-Print Network [OSTI]

    February 2012 004/12 Did you know that the Navy Memorial in Washington D.C. is is honoring all://navymemorial.org/yotc/Home/tabid/224/Default.aspx Challenge to all: in the Navy Log. This is your free opportunity to be entered and activities occurring across our Navy to support YOTC through this Facebook page: http

  19. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-07-12T23:59:59.000Z

    To clarify and modify policies and procedures for management of Department of Energy (DOE), including National Nuclear Security Administration (NNSA), facility contractor employees located in the Washington, D.C., area. Cancels DOE N 350.5. Certified 12-28-06. Canceled by DOE O 350.2A.

  20. Operation of the DC current transformer intensity monitors at FNAL during run II

    SciTech Connect (OSTI)

    Crisp, J.; Fellenz, B.; Heikkinen, D.; Ibrahim, M.A.; Meyer, T.; Vogel, G.; /Fermilab

    2012-01-01T23:59:59.000Z

    Circulating beam intensity measurements at FNAL are provided by five DC current transformers (DCCT), one per machine. With the exception of the DCCT in the Recycler, all DCCT systems were designed and built at FNAL. This paper presents an overview of both DCCT systems, including the sensor, the electronics, and the front-end instrumentation software, as well as their performance during Run II.

  1. New Global Alliance Formed to Undercut Illegal WASHINGTON, DC, May 26, 2010 (ENS) -To reduce trade

    E-Print Network [OSTI]

    New Global Alliance Formed to Undercut Illegal Logging WASHINGTON, DC, May 26, 2010 (ENS. "Some companies are not aware of the need to ask questions about the wood they are buying than on the performance of individual companies, and will complement existing initiatives that certify

  2. DC 20 a,f,g AXISYMMETRIC INSTABILITY IN A NONCIRCDLAR TOKAMAK

    E-Print Network [OSTI]

    Sprott, Julien Clinton

    DC 20 a,f,g AXISYMMETRIC INSTABILITY IN A NONCIRCDLAR TOKAMAK: EXPERIMENT AND THEORY BY B, a tokamak with a four-null poloidal divertor. Experi mental results are clo sely compared with stability indicates #12;AXISYMMETRIC INSTABILITY IN A NONCIRCULAR TOKAMAK: EXPERIMENT AND THEORY by B. Lipschultz

  3. Optical Investigations of Dust Particles Distribution in RF and DC Discharges

    SciTech Connect (OSTI)

    Ramazanov, T. S.; Dosbolayev, M. K.; Jumabekov, A. N.; Amangaliyeva, R. Zh. [Al-Farabi Kazakh National University, IETP, 96a Tole Bi St., Almaty 050012 (Kazakhstan); Filatova, I. I.; Azharonok, V. V. [B. I. Stepanov Institute of Physics NAS of Belarus, Nezavisimosti Ave., 68, 220072, Minsk (Belarus)

    2008-09-07T23:59:59.000Z

    Optical emission spectroscopy is used to study dust particles movement and conditions of a formation of ordered plasma-dust structures in a capacitively coupled RF discharge. 3D binocular diagnostics of plasma-dust structures in dc discharge was made.

  4. An Hybrid-Excited Flux-Switching Machine for High Speed DC-Alternator Applications

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ) with excitation coils located in stator slots (or inner DC windings). After describing the three phase structure is interesting for variable- speed applications. Finally, a prototype having 12 stator poles and different rotor in the stator [17]. Regarding the thermal behavior, we demonstrate in this work the suitability of this topology

  5. Save the Date for ACES 2014! Washington D.C. | December 811, 2014

    E-Print Network [OSTI]

    Watson, Craig A.

    methods and experiences relating to Ecosystem Services. Specific themes to be ad dressed include that ACES: A Community on Ecosystem Services, in partner ship with the Ecosystem Markets Community and the Ecosystem Services Partnership, will host the ACES 2014 Conference in Washington, DC, December 811, 2014

  6. Comparison of Two Autonomous AC-DC Converters for Piezoelectric Energy Scavenging Systems

    E-Print Network [OSTI]

    Boyer, Edmond

    - 1 - Comparison of Two Autonomous AC-DC Converters for Piezoelectric Energy Scavenging Systems E Cornaredo, Milan, Italy Abstract - Piezoelectric Energy Scavenging Systems (PESS) are used to convert of the output voltage of these transducers is needed. Since the output power level of the energy transducer can

  7. Adaptive Nonlinear Control of Induction Motors through AC/DC/AC A. El Fadili*1

    E-Print Network [OSTI]

    Boyer, Edmond

    in a satisfactory way. First, a nonlinear model of the whole controlled system is developed within the Park be tightly regulated; (iii) the power factor correction (PFC) w.r.t. the power supply net must be performed control objectives (motor speed tracking, rotor flux regulation, DC link voltage regulation and unitary

  8. Hydrogen Storage Systems Analysis Working Group Meeting Argonne National Laboratory DC Offices

    E-Print Network [OSTI]

    at Savannah River National Laboratory (Don Anton and Bruce Hardy, SRNL) Based on the operating conditionsHydrogen Storage Systems Analysis Working Group Meeting Argonne National Laboratory DC Offices 955 by Romesh Kumar Argonne National Laboratory and Laura Verduzco Sentech, Inc. February 28, 2007 #12;SUMMARY

  9. Living downtown in Washington, D.C. : defining residential community in the city center

    E-Print Network [OSTI]

    Allen, Robin P. (Robin Porter)

    1995-01-01T23:59:59.000Z

    In Washington D.C., as in many other American cities, a significant section of the downtown is distinguished by boarded-up buildings and vacant lots. In spite of traces of a city plan that could organize and accommodate a ...

  10. First National Conference on Carbon Sequestration Washington, DC, May 14-17, 2001

    E-Print Network [OSTI]

    First National Conference on Carbon Sequestration Washington, DC, May 14-17, 2001 Caldeira, K for Research on Ocean Carbon Sequestration (DOCS) *Climate and Carbon Cycle Modeling Group, Lawrence Livermore carbon sequestration strategy. Therefore, we want to understand the effectiveness of oceanic injection

  11. Corbicula Biomonitoring in the Anacostia Watershed Final Report to the DC Water Resources Research Center

    E-Print Network [OSTI]

    District of Columbia, University of the

    1 Corbicula Biomonitoring in the Anacostia Watershed Final Report to the DC Water Resources and estuary sites for eight weeks and tissues analyzed for 21 pesticides, 28 PCB congenors, 18 PAHs and 6 tPAHs were significently increased. Clams placed just above tide in three of five main tributaries

  12. Conductor Color-Coding In the recent past, most PV arrays have grounded the DC

    E-Print Network [OSTI]

    Johnson, Eric E.

    Conductor Color-Coding In the recent past, most PV arrays have grounded the DC negative conductor would be most clearly understood if it were black. The increasing use of transformerless inverters will dictate the use of ungrounded PV arrays (Section 690.35). Then we can adopt a "red is positive" and "black

  13. INVESTIGATION OF ELECTRIC CONDITIONS IN THE VICINITY OF CARBON NANOTUBES GROWN IN A DC PLASMA SHEATH

    E-Print Network [OSTI]

    Boyer, Edmond

    nanotubes (CNTs ­ long tubular carbon nanostructures) belong to the best electron field emitting materials, such as nanoelectronics devices or mechanical reinforcement in composite materials [2,3]. The field emission propertiesINVESTIGATION OF ELECTRIC CONDITIONS IN THE VICINITY OF CARBON NANOTUBES GROWN IN A DC PLASMA

  14. Copyright 2011 American Chemical Society 1155 Sixteenth Street N.W., Washington, DC 20036

    E-Print Network [OSTI]

    Aksay, Ilhan A.

    Copyright © 2011 American Chemical Society 1155 Sixteenth Street N.W., Washington, DC 20036 For Selected: Application of Highly Ordered TiO2 Nanotube Arrays in Flexible Dye-Sensitized Solar Cells Daibin Light-Emitting Diodes on Solution-Processed Graphene Transparent Electrodes Junbo Wu, Mukul Agrawal, H

  15. Navier-Stokes on Black Hole Horizons and DC Thermoelectric Conductivity

    E-Print Network [OSTI]

    Aristomenis Donos; Jerome P. Gauntlett

    2015-06-04T23:59:59.000Z

    We consider a general class of black hole solutions of Einstein-Maxwell theory which are holographically dual to CFTs with spatially dependent sources. We show that an averaged DC thermoelectric conductivity matrix can be obtained by solving the forced, linearised, time-independent Navier-Stokes equations on the black hole horizon for an incompressible and charged fluid.

  16. Navier-Stokes on Black Hole Horizons and DC Thermoelectric Conductivity

    E-Print Network [OSTI]

    Donos, Aristomenis

    2015-01-01T23:59:59.000Z

    We consider a general class of black hole solutions of Einstein-Maxwell theory which are holographically dual to CFTs with spatially dependent sources. We show that an averaged DC thermoelectric conductivity matrix can be obtained by solving the forced, linearised, time-independent Navier-Stokes equations on the black hole horizon for an incompressible and charged fluid.

  17. A Comparison of the AC and DC Power Flow Models for LMP Calculations

    E-Print Network [OSTI]

    A Comparison of the AC and DC Power Flow Models for LMP Calculations Thomas J. Overbye, Xu Cheng power flow model for LMP-based market calculations. The paper first provides a general discussion of balanced, three phase, electric power transmission networks is through the solution of the power flow. From

  18. NXT DC Motor Frequency Response Last updated 11/04/12 Copyright Paul Oh

    E-Print Network [OSTI]

    Oh, Paul

    Response Previous labs and lectures investigated a system's step response. One could observe time- domain-domain. Hence concepts on attenuation and phase lag are thus presented. Preamble: Summary of Step Response to any signal. Figure A: Step response of NXT DC motor to a motor command of 75% power Figure B: Simulink

  19. Performance test results for the Eaton dc developmental power train in an electric test bed vehicle

    SciTech Connect (OSTI)

    Crumley, R.L.; Donaldson, M.R.

    1987-09-01T23:59:59.000Z

    This report presents the results of the tests performed on a direct current (dc) power train in a test bed vehicle developed by the Eaton Corporation for the US Department of Energy (DOE). The tests were performed by EG and G Idaho, Inc. at the Idaho National Engineering Laboratory (INEL). The purpose of the INEL testing was to provide test results from which an evaluation of the performance capabilities of the Eaton dc power train could be made and compared with other vehicle propulsion systems. The planned tests were primarily oriented toward road testing, chassis dynamometer testing, and associated dynamometer coastdown tests for road loss determination. Range tests of the Eaton dc test bed vehicle using an ALCO 2200 lead acid battery pack, produced ranges of 97 km at 56 km/h (60 miles at 35 mph), 79 km at 72 km/h (49 miles at 45 mph), and 47 km at 88 km/h (29 miles at 55 mph). The corresponding net dc energy consumptions are 135 Wh/km (217 Wh/mile), 145 Wh/km (233 Wh/mile), and 178 Wh/km (287 Wh/mile). The energy consumption for the D-cycle test was 241 Wh/km (387 Wh/mile). 8 refs., 11 figs., 16 tabs.

  20. Policy Research Working Paper 4844, World Bank, Washington DC, April 2009 Weakly Relative Poverty

    E-Print Network [OSTI]

    Krivobokova, Tatyana

    Policy Research Working Paper 4844, World Bank, Washington DC, April 2009 Weakly Relative Poverty, 20433, USA Abstract: Prevailing measures of relative poverty are unchanged when all incomes grow that relax these assumptions. On calibrating our measures to national poverty lines and survey data, we find

  1. Performance Characterization of IP Network-based Control Methodologies for DC Motor Applications Part I

    E-Print Network [OSTI]

    Chow, Mo-Yuen

    Performance Characterization of IP Network-based Control Methodologies for DC Motor Applications stability, allowing control of real-time applications. I. INTRODUCTION A recent trend in control systems ­ Part I Tyler Richards Mo-Yuen Chow Advanced Diagnosis Automation and Control Lab Advanced Diagnosis

  2. Electrical detection of spin pumping: dc voltage generated by ferromagnetic resonance at ferromagnet/nonmagnet contact

    E-Print Network [OSTI]

    van der Wal, Caspar H.

    Electrical detection of spin pumping: dc voltage generated by ferromagnetic resonance We describe electrical detection of spin pumping in metallic nanostructures. In the spin pumping effect, a precessing ferromagnet attached to a normal metal acts as a pump of spin-polarized current

  3. Teaching Sequence for Two Dimensional Motion R. A. Morse, St. Albans School, Washington, DC

    E-Print Network [OSTI]

    Steinberg, Richard N.

    Teaching Sequence for Two Dimensional Motion R. A. Morse, St. Albans School, Washington, DC robert in understanding. Final teaching sequence 1992- 2000 4. Developed sequence of discussion, simulation use, written questions and class discussions designed to engage students throughout sequence. Results now pretty good

  4. Video: Activity Recognition on Mobile Phones Why do we need it and how can it be done?

    E-Print Network [OSTI]

    Beigl, Michael

    Video: Activity Recognition on Mobile Phones ­ Why do we need it and how can it be done? Matthias. Current models are equipped with a variety of sensors and enough processing power to make activ- ity have to be taken into account, ranging from flexibility over extensibility to energy efficiency

  5. Wegelerstrae 6 53115 Bonn Germany phone +49 228 73-3427 fax +49 228 73-7527

    E-Print Network [OSTI]

    Bartels, Soeren

    Wegelerstra˙e 6 53115 Bonn Germany phone +49 228 73-3427 fax +49 228 73-7527 www Simulation, Universität Bonn, 53115 Bonn, Germany; Correspond with chernov@hcm.uni-bonn.de #12;#12;Noname Simulation, University of Bonn Endenicher Allee 60, 53115 Bonn, Germany Tel.: +49-228-7362246 Fax: +49

  6. UCSC For-Sale Housing Questionnaire (2013-2014) Colleges, Housing and Educational Services (CHES) Phone: (831) 458-3506

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    UCSC For-Sale Housing Questionnaire (2013-2014) Colleges, Housing and Educational Services (CHES) Phone: (831) 458-3506 Faculty and Staff Housing Office Fax: (831) 458-1937 Hagar Court Community Room Email: facultyhousing@ucsc.edu Santa Cruz, CA 95064 Mailstop: Faculty Housing Rev. 7

  7. Mobile Phone Based Drunk Driving Detection Jiangpeng Dai, Jin Teng, Xiaole Bai, Zhaohui Shen and Dong Xuan

    E-Print Network [OSTI]

    Xuan, Dong

    Therapy Southeast University The Ohio State University The Ohio State University Nanjing, Jiangsu, China Columbus, Ohio, USA Columbus, Ohio, USA jpdai@seu.edu.cn {jpdai, tengj, baixia, xuan}@cse.ohio high accuracy and energy efficiency. Keywords--Drunk Driving Detection, Mobile Phones, Accelera- tion

  8. Figure 1. ComTouch Concept drawing showing a handheld sleeve that fits onto the back of a mobile phone

    E-Print Network [OSTI]

    Jacob, Robert J.K.

    Touch, is a vibrotactile device sleeve that fits over the back of a mobile phone. The basic concept is a handheld deviceFigure 1. ComTouch Concept drawing showing a handheld sleeve that fits onto the back of a mobile

  9. Smart Phone Users BEWARE!! The NYPD is reporting an increase in the theft of electronic devices from

    E-Print Network [OSTI]

    Papavasiliou, F. Nina

    Smart Phone Users BEWARE!! The NYPD is reporting an increase in the theft of electronic devices. Don't display it when not in use. Use a hands free device. · Change the color of your earphones from blocks and head for an area where people are or to the nearest open store. · Password protect your device

  10. Cool-Tether: Energy Efficient On-the-fly WiFi Hot-spots using Mobile Phones

    E-Print Network [OSTI]

    Belding-Royer, Elizabeth M.

    for their home computers, especially in the emerg- ing markets of the world. Even in developed countries where at home, at work, and on the move. In this context, we take advantage of two significant technology trends in the number of cellular subscribers, smart- phones are rapidly evolving into users' primary Internet ac- cess

  11. The Citizen Cyberscience Lectures - 1) Mobile phones and Africa: a success story 2) Citizen Problem Solving

    SciTech Connect (OSTI)

    None

    2009-10-28T23:59:59.000Z

    Mobile phones and Africa: a success story Dr. Mo Ibrahim, Mo Ibrahim Foundation Citizen Problem Solving Dr. Alpheus Bingham, InnoCentive The Citizen Cyberscience Lectures are hosted by the partners of the Citizen Cyberscience Centre, CERN, The UN Institute of Training and Research and the University of Geneva. The goal of the Lectures is to provide an inspirational forum for participants from the various international organizations and academic institutions in Geneva to explore how information technology is enabling greater citizen participation in tackling global development challenges as well as global scientific research. The first Citizen Cyberscience Lectures will welcome two speakers who have both made major innovative contributions in this area. Dr. Mo Ibrahim, founder of Celtel International, one of Africa’s most successful mobile network operators, will talk about “Mobile phones and Africa: a success story”. Dr. Alpheus Bingham, founder of InnoCentive, a Web-based community that solves industrial R&D; challenges, will discuss “Citizen Problem Solving”. The Citizen Cyberscience Lectures are open and free of charge. Participants from outside CERN must register by sending an email to Yasemin.Hauser@cern.ch BEFORE the 23rd october to be able to access CERN. THE LECTURES Mobile phones and Africa: a success story Dr. Mo Ibrahim, Mo Ibrahim Foundation Abstract The introduction of mobile phones into Africa changed the continent, enabling business and the commercial sector, creating directly and indirectly, millions of jobs. It enriched the social lives of many people. Surprisingly, it supported the emerging civil society and advanced the course of democracy Bio Dr Mo Ibrahim is a global expert in mobile communications with a distinguished academic and business career. In 1998, Dr Ibrahim founded Celtel International to build and operate mobile networks in Africa. Celtel became one of Africa’s most successful companies with operations in 15 countries, covering more than a third of the continent’s population and investing more than US$750 million in Africa. The company was sold to MTC Kuwait in 2005 for $3.4billion. In 2006 Dr Ibrahim established the Mo Ibrahim Foundation to support great African leadership. The Foundation focuses on two major initiatives to stimulate debate around, and improve the quality of, governance in Africa. The Ibrahim Prize for Achievement in African Leadership recognises and celebrates excellence; and the Ibrahim Index of African Governance provides civil society with a comprehensive and quantifiable tool to promote government accountability. Dr Ibrahim is also Founding Chairman of Satya Capital Ltd, an investment company focused on opportunities in Africa. Dr Ibrahim has been awarded an Honorary Doctorate by the University of London’s School of Oriental and African Studies, the University of Birmingham and De Montfort University, Leicester as well as an Honorary Fellowship Award from the London Business School. He has also received the Chairman’s Award for Lifetime Achievement from the GSM Association in 2007 and the Economists Innovation Award 2007 for Social & Economic Innovation. In 2008 Dr Ibrahim was presented with the BNP Paribas Prize for Philanthropy, and also listed by TIME magazine as one of the 100 most influential people in the world. Citizen Problem Solving Dr. Alpheus Bingham, InnoCentive Abstract American playwright Damien Runyon (Guys and Dolls) once remarked, "the race is not always to the swift, nor the victory to the strong -- but that IS how you bet." Not only does a system of race handicapping follow from this logic, but the whole notion of expertise and technical qualifications. Such 'credentials' allow one to 'bet' on who might most likely solve a difficult challenge, whether as consultant, contractor or employee. Of course, the approach would differ if one were allowed to bet AFTER the race. When such systems came into broad use, i.e., chat rooms, usenets, innocentive, etc., and were subsequently studied, it was often found that the greate

  12. The Citizen Cyberscience Lectures - 1) Mobile phones and Africa: a success story 2) Citizen Problem Solving

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    Mobile phones and Africa: a success story Dr. Mo Ibrahim, Mo Ibrahim Foundation Citizen Problem Solving Dr. Alpheus Bingham, InnoCentive The Citizen Cyberscience Lectures are hosted by the partners of the Citizen Cyberscience Centre, CERN, The UN Institute of Training and Research and the University of Geneva. The goal of the Lectures is to provide an inspirational forum for participants from the various international organizations and academic institutions in Geneva to explore how information technology is enabling greater citizen participation in tackling global development challenges as well as global scientific research. The first Citizen Cyberscience Lectures will welcome two speakers who have both made major innovative contributions in this area. Dr. Mo Ibrahim, founder of Celtel International, one of Africa?s most successful mobile network operators, will talk about ?Mobile phones and Africa: a success story?. Dr. Alpheus Bingham, founder of InnoCentive, a Web-based community that solves industrial R&D; challenges, will discuss ?Citizen Problem Solving?. The Citizen Cyberscience Lectures are open and free of charge. Participants from outside CERN must register by sending an email to Yasemin.Hauser@cern.ch BEFORE the 23rd october to be able to access CERN. THE LECTURES Mobile phones and Africa: a success story Dr. Mo Ibrahim, Mo Ibrahim Foundation Abstract The introduction of mobile phones into Africa changed the continent, enabling business and the commercial sector, creating directly and indirectly, millions of jobs. It enriched the social lives of many people. Surprisingly, it supported the emerging civil society and advanced the course of democracy Bio Dr Mo Ibrahim is a global expert in mobile communications with a distinguished academic and business career. In 1998, Dr Ibrahim founded Celtel International to build and operate mobile networks in Africa. Celtel became one of Africa?s most successful companies with operations in 15 countries, covering more than a third of the continent?s population and investing more than US$750 million in Africa. The company was sold to MTC Kuwait in 2005 for $3.4billion. In 2006 Dr Ibrahim established the Mo Ibrahim Foundation to support great African leadership. The Foundation focuses on two major initiatives to stimulate debate around, and improve the quality of, governance in Africa. The Ibrahim Prize for Achievement in African Leadership recognises and celebrates excellence; and the Ibrahim Index of African Governance provides civil society with a comprehensive and quantifiable tool to promote government accountability. Dr Ibrahim is also Founding Chairman of Satya Capital Ltd, an investment company focused on opportunities in Africa. Dr Ibrahim has been awarded an Honorary Doctorate by the University of London?s School of Oriental and African Studies, the University of Birmingham and De Montfort University, Leicester as well as an Honorary Fellowship Award from the London Business School. He has also received the Chairman?s Award for Lifetime Achievement from the GSM Association in 2007 and the Economists Innovation Award 2007 for Social & Economic Innovation. In 2008 Dr Ibrahim was presented with the BNP Paribas Prize for Philanthropy, and also listed by TIME magazine as one of the 100 most influential people in the world. Citizen Problem Solving Dr. Alpheus Bingham, InnoCentive Abstract American playwright Damien Runyon (Guys and Dolls) once remarked, "the race is not always to the swift, nor the victory to the strong -- but that IS how you bet." Not only does a system of race handicapping follow from this logic, but the whole notion of expertise and technical qualifications. Such 'credentials' allow one to 'bet' on who might most likely solve a difficult challenge, whether as consultant, contractor or employee. Of course, the approach would differ if one were allowed to bet AFTER the race. When such systems came into broad use, i.e., chat rooms, usenets, innocentive, etc., and were subsequently studied, it was often found that the greatest probability of solu

  13. Impact of quasi-dc currents on three-phase distribution transformer installations. Power Systems Technology Program

    SciTech Connect (OSTI)

    McConnell, B.W.; Barnes, P.R. [Oak Ridge National Lab., TN (United States); Tesche, F.M. [Tesche (F.M.), Dallas, TX (United States); Schafer, D.A. [Mission Research Corp., Albuquerque, NM (United States)

    1992-06-01T23:59:59.000Z

    This report summarizes a series of tests designed to determine the response of quasi-dc currents on three-phase power distribution transformers for electric power systems. In general, if the dc injection is limited to the primary side of a step-down transformer, significant harmonic distortion is noted and an increase in the reactive power demand results. For dc injection on the secondary (load) side of the step-down transformer the harmonic content at the secondary side is quite high and saturation occurs with a relatively low level of dc injection; however, the reactive power demand is significantly lower. These tests produced no apparent damage to the transformers. Transformer damage is dependent on the duration of the dc excitation, the level of the excitation, and on thermal characteristics of the transfer. The transformer response time is found to be much shorter than seen in power transformer tests at lower dc injection levels. This shorter response time suggests that the response time is strongly dependent on the injected current levels, and that higher levels of dc injection for shorter durations could produce very high reactive power demands and harmonic distortion within a few tenths of a second. The added reactive power load could result in the blowing of fuses on the primary side of the transformer for even moderate dc injection levels, and neutral currents are quite large under even low-level dc injection. This ``smoking neutral`` results in high-level harmonic injection into equipment via the neutral and in possible equipment failure.

  14. DC-like Phase Space Manipulation and Particle Acceleration Using Chirped AC Fields

    SciTech Connect (OSTI)

    P.F. Schmit and N.J. Fisch

    2009-06-17T23:59:59.000Z

    Waves in plasmas can accelerate particles that are resonant with the wave. A DC electric field also accelerates particles, but without a resonance discrimination, which makes the acceleration mechanism profoundly different. We investigate the effect on a Hamiltonian distribution of an accelerating potential waveform, which could, for example, represent the average ponderomotive effect of two counterpropagating electromagnetic waves. In particular, we examine the apparent DC-like time-asymptotic response of the distribution in regimes where the potential structure is accelerated adiabatically. A highly resonant population within the distribution is always present, and we characterize its nonadiabatic response during wave-particle resonance using an integral method in the noninertial reference frame moving with the wave. Finally, we show that in the limit of infinitely slow acceleration of the wave, these highly resonant particles disappear and the response

  15. Effect of alkali addition on DC conductivity and thermal properties of vanadium-bismo-borate glasses

    SciTech Connect (OSTI)

    Khasa, S., E-mail: skhasa@rediff.com; Dahiya, M. S., E-mail: skhasa@rediff.com [Physics Department, Deenbandhu Chhotu Ram University of Science and Technology, Murthal-131039 (India); Agarwal, A. [Physics Department, Guru Jambheshwara University of Science and Technology, Hisar-125001 (India)

    2014-04-24T23:59:59.000Z

    The DC Conductivity and Differential Thermal Analysis of glasses with composition (30?x)Li{sub 2}O?xV{sub 2}O{sub 5}?20Bi{sub 2}O{sub 3}?50B{sub 2}O{sub 3}(x=15, 10, 5) has been carried out in order to study the effect of replacing the Transition Metal Oxide (TMO) with alkali oxide. A significant increase in the DC conductivity has been observed with increase in alkali content. Again the thermal measurements have shown the decrease in both glass transition temperature (T{sub g}) and crystallization temperature (T{sub x}). The Glass Stability (GS) and Glass Forming Ability (GFA) have also been calculated and these also were found to decrease with increase in alkali oxide content at the cost of TMO.

  16. Switch contact device for interrupting high current, high voltage, AC and DC circuits

    DOE Patents [OSTI]

    Via, Lester C.; Witherspoon, F. Douglas; Ryan, John M.

    2005-01-04T23:59:59.000Z

    A high voltage switch contact structure capable of interrupting high voltage, high current AC and DC circuits. The contact structure confines the arc created when contacts open to the thin area between two insulating surfaces in intimate contact. This forces the arc into the shape of a thin sheet which loses heat energy far more rapidly than an arc column having a circular cross-section. These high heat losses require a dramatic increase in the voltage required to maintain the arc, thus extinguishing it when the required voltage exceeds the available voltage. The arc extinguishing process with this invention is not dependent on the occurrence of a current zero crossing and, consequently, is capable of rapidly interrupting both AC and DC circuits. The contact structure achieves its high performance without the use of sulfur hexafluoride.

  17. Parallel 3D Finite Element Numerical Modelling of DC Electron Guns

    SciTech Connect (OSTI)

    Prudencio, E.; Candel, A.; Ge, L.; Kabel, A.; Ko, K.; Lee, L.; Li, Z.; Ng, C.; Schussman, G.; /SLAC

    2008-02-04T23:59:59.000Z

    In this paper we present Gun3P, a parallel 3D finite element application that the Advanced Computations Department at the Stanford Linear Accelerator Center is developing for the analysis of beam formation in DC guns and beam transport in klystrons. Gun3P is targeted specially to complex geometries that cannot be described by 2D models and cannot be easily handled by finite difference discretizations. Its parallel capability allows simulations with more accuracy and less processing time than packages currently available. We present simulation results for the L-band Sheet Beam Klystron DC gun, in which case Gun3P is able to reduce simulation time from days to some hours.

  18. Demonstration of Cathode Emittance Dominated High Bunch Charge Beams in a DC gun-based Photoinjector

    E-Print Network [OSTI]

    Gulliford, Colwyn; Bazarov, Ivan; Dunham, Bruce; Cultrera, Luca

    2015-01-01T23:59:59.000Z

    We present the results of transverse emittance and longitudinal current profile measurements of high bunch charge (greater than or equal to 100 pC) beams produced in the DC gun-based Cornell Energy Recovery Linac Photoinjector. In particular, we show that the cathode thermal and core beam emittances dominate the final 95% and core emittance measured at 9-9.5 MeV. Additionally, we demonstrate excellent agreement between optimized 3D space charge simulations and measurement, and show that the quality of the transverse laser distribution limits the optimal simulated and measured emittances. These results, previously thought achievable only with RF guns, demonstrate that DC gun based photoinjectors are capable of delivering beams with sufficient single bunch charge and beam quality suitable for many current and next generation accelerator projects such as Energy Recovery Linacs (ERLs) and Free Electron Lasers (FELs).

  19. Efficiency consideration of DC link soft-switching inverters for motor drive applications

    SciTech Connect (OSTI)

    Lai, J.S.; Young, R.W.; McKeever, J.W.

    1994-12-31T23:59:59.000Z

    This paper critically evaluates efficiency of soft switching inverters including an actively clamped resonant dc link inverter and a clamped-mode resonant pole inverter. An analytical approach to evaluating efficiency of the clamped-mode soft switching inverter has been developed. The evaluation results are compared with that of the standard pulse-width-modulation (PWM) inverter. A 50-kW induction motor is used as the variable load, and the inverter efficiency is evaluated under different speed and torque conditions. The clamped-mode soft-switching inverter, although eliminating the switching loss, shows poor efficiency over the entire load range. Under low load conditions, the efficiency profile is even worse. The actively clamped resonant dc link inverter shows highest efficiency over the entire speed and torque range. However, its energy saving over the standard PWM inverter is marginal under full load or high speed conditions.

  20. Time series analysis of ionization waves in dc neon glow discharge

    SciTech Connect (OSTI)

    Hassouba, M. A.; Al-Naggar, H. I.; Al-Naggar, N. M.; Wilke, C. [Department of Physics, Faculty of Science, Benha University (Egypt); Institute of Physics, E. M. A. University, Domstrasse 10a, 17489 Greifswald (Germany)

    2006-07-15T23:59:59.000Z

    The dynamics of dc neon glow discharge is examined by calculating a Lyapunov exponent spectrum (LES) and correlation dimension (D{sub corr}) from experimental time series. The embedding theory is used to reconstruct an attractor with the delay coordinate method. The analysis refers to periodic, chaotic, and quasi-periodic attractors. The results obtained are confirmed by a comparison with other methods of time series analysis such as the Fourier power spectrum and autocorrelation function. The main object of the present work is the positive column of a dc neon glow discharge. The positive column is an excellent model for the study of a non-linearity plasma system because it is nonisothermal plasma far from equilibrium.

  1. The artistry of construction: an investigation into construction as a creative process and the influence of mobile phones within domestic scale construction projects 

    E-Print Network [OSTI]

    McMeel, Dermott

    2009-01-01T23:59:59.000Z

    This Thesis seeks to analyse the influence that mobile phones exert on existing communication and working practices, and on the relationships of participants involved during on-site construction. The complexity of ...

  2. Social Security Administration Information Phone: (706) 542-2900 Fax: (706) 583-0123 Web: international.uga.edu Email: issis@uga.edu

    E-Print Network [OSTI]

    Hall, Daniel

    Social Security Administration Information Phone: (706) 542-2900 Fax: (706) 583-0123 Web and return, you will keep the same number. For additional information you may visit the Social Security with your new Social Security information. #12;

  3. 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 5 Cisco Unified IP Phone 6945

    E-Print Network [OSTI]

    Moeller, Ralf

    -over-Ethernet (PoE) Class 1, which is the lowest-power consumption IP phone to save energy and support your green (Sweden) Serbian (Republic of Serbia and Republic of Montenegro) Slovenian (Slovenia) Thai (Thailand

  4. Method of measuring the dc electric field and other tokamak parameters

    DOE Patents [OSTI]

    Fisch, Nathaniel J. (Princeton, NJ); Kirtz, Arnold H. (Princeton Junction, NJ)

    1992-01-01T23:59:59.000Z

    A method including externally imposing an impulsive momentum-space flux to perturb hot tokamak electrons thereby producing a transient synchrotron radiation signal, in frequency-time space, and the inference, using very fast algorithms, of plasma parameters including the effective ion charge state Z.sub.eff, the direction of the magnetic field, and the position and width in velocity space of the impulsive momentum-space flux, and, in particular, the dc toroidal electric field.

  5. VUV generation by adiabatically expanded and excited by a DC electrical discharge Argon gas

    SciTech Connect (OSTI)

    Pipergias, K.; Yasemidis, D.; Reppa, E.; Pentaris, D.; Efthimiopoulos, T. [Laser, Non linear and Quantum Optics Labs, Physics Department University of Patras, Patras, Greece 26500 (Greece); Merlemis, N. [Laser, Non linear and Quantum Optics Labs, Physics Department University of Patras, Patras, Greece 26500 (Greece); TEI of Athens, Phys. Chem. and Mater. Tech. Department, Athens, Greece, 12 210 (Greece); Giannetas, V. [Physics Department, University of Patras, Patras, Greece 26500 (Greece)

    2010-11-10T23:59:59.000Z

    We investigate the emission of Argon (Ar) gas which is adiabatically expanded through a nozzle and excited using a DC electrical discharge. Because of the expansion and the electronic excitation, Ar dimers and clusters are formed, which give radiation in the second (2nd) and in the third (3rd) continua of Ar, centered at about 126 and 254 nm respectively. We particularly focus our study on the 2nd continuum, in order to develop a laser at this wavelength.

  6. Characterization of terahertz emission from a dc-biased filament in air

    SciTech Connect (OSTI)

    Chen Yanping; Wang Tiejun; Marceau, Claude; Chin, See Leang [Centre d'Optique, Photonique et Laser (COPL), and Departement de Physique, de genie physique et d'optique, Universite Laval, Quebec, Quebec G1V 0A6 (Canada); Theberge, Francis; Chateauneuf, Marc; Dubois, Jacques [Defence Research and Development Canada-Valcartier, 2459 Pie-XI Blvd. North, Quebec, Quebec G3J 1X5 (Canada); Kosareva, Olga [International Laser Center, Physics Department, M.V. Lomonosov Moscow State University, Moscow 119992 (Russian Federation)

    2009-09-07T23:59:59.000Z

    We demonstrate that the terahertz emission from a dc-biased filament can be regarded as a sum of an elliptically polarized terahertz source (generated by a filament without external electric field) and a linearly polarized terahertz source induced by the external electric field applied to the filament. The peak frequency and linewidth of the linearly polarized terahertz source are related to the average plasma density of the filament.

  7. Method and apparatus for generating radiation utilizing DC to AC conversion with a conductive front

    DOE Patents [OSTI]

    Dawson, J.M.; Mori, W.B.; Lai, C.H.; Katsouleas, T.C.

    1998-07-14T23:59:59.000Z

    Method and apparatus ar disclosed for generating radiation of high power, variable duration and broad tunability over several orders of magnitude from a laser-ionized gas-filled capacitor array. The method and apparatus convert a DC electric field pattern into a coherent electromagnetic wave train when a relativistic ionization front passes between the capacitor plates. The frequency and duration of the radiation is controlled by the gas pressure and capacitor spacing. 4 figs.

  8. Method and apparatus for generating radiation utilizing DC to AC conversion with a conductive front

    DOE Patents [OSTI]

    Dawson, John M. (Pacific Palisades, CA); Mori, Warren B. (Hermosa Beach, CA); Lai, Chih-Hsiang (So. Pasadena, CA); Katsouleas, Thomas C. (Malibu, CA)

    1998-01-01T23:59:59.000Z

    Method and apparatus for generating radiation of high power, variable duration and broad tunability over several orders of magnitude from a laser-ionized gas-filled capacitor array. The method and apparatus convert a DC electric field pattern into a coherent electromagnetic wave train when a relativistic ionization front passes between the capacitor plates. The frequency and duration of the radiation is controlled by the gas pressure and capacitor spacing.

  9. Round-robin artificial contamination test on high voltage dc insulators

    SciTech Connect (OSTI)

    Naito, K.; Schneider, H.M.

    1995-07-01T23:59:59.000Z

    This paper summarizes the results of a worldwide round-robin test of high voltage dc (HVDC) insulators, which was carried out in six laboratories aiming at standardization of the method for artificial contamination tests on HVDC insulators. Flashover characteristics of three kinds of specimens were evaluated by the clean fog and the salt fog procedures. Sufficient information is now available to allow the preparation of provisional international specifications for artificial contamination testing of HVDC insulators.

  10. Recovery of lithium and cobalt from waste lithium ion batteries of mobile phone

    SciTech Connect (OSTI)

    Jha, Manis Kumar, E-mail: mkjha@nmlindia.org; Kumari, Anjan; Jha, Amrita Kumari; Kumar, Vinay; Hait, Jhumki; Pandey, Banshi Dhar

    2013-09-15T23:59:59.000Z

    Graphical abstract: Recovery of valuable metals from scrap batteries of mobile phone. - Highlights: • Recovery of Co and Li from spent LIBs was performed by hydrometallurgical route. • Under the optimum condition, 99.1% of lithium and 70.0% of cobalt were leached. • The mechanism of the dissolution of lithium and cobalt was studied. • Activation energy for lithium and cobalt were found to be 32.4 kJ/mol and 59.81 kJ/mol, respectively. • After metal recovery, residue was washed before disposal to the environment. - Abstract: In view of the stringent environmental regulations, availability of limited natural resources and ever increasing need of alternative energy critical elements, an environmental eco-friendly leaching process is reported for the recovery of lithium and cobalt from the cathode active materials of spent lithium-ion batteries of mobile phones. The experiments were carried out to optimize the process parameters for the recovery of lithium and cobalt by varying the concentration of leachant, pulp density, reductant volume and temperature. Leaching with 2 M sulfuric acid with the addition of 5% H{sub 2}O{sub 2} (v/v) at a pulp density of 100 g/L and 75 °C resulted in the recovery of 99.1% lithium and 70.0% cobalt in 60 min. H{sub 2}O{sub 2} in sulfuric acid solution acts as an effective reducing agent, which enhance the percentage leaching of metals. Leaching kinetics of lithium in sulfuric acid fitted well to the chemical controlled reaction model i.e. 1 ? (1 ? X){sup 1/3} = k{sub c}t. Leaching kinetics of cobalt fitted well to the model ‘ash diffusion control dense constant sizes spherical particles’ i.e. 1 ? 3(1 ? X){sup 2/3} + 2(1 ? X) = k{sub c}t. Metals could subsequently be separated selectively from the leach liquor by solvent extraction process to produce their salts by crystallization process from the purified solution.

  11. Hardware model of a shipboard zonal electrical distribution system (ZEDS) : alternating current/direct current (AC/DC)

    E-Print Network [OSTI]

    Tidd, Chad N. (Chad Norman)

    2010-01-01T23:59:59.000Z

    A hardware model of a shipboard electrical distribution system based on aspects of the DDG 51 Flight IIA, Arleigh Burke class, 60Hz Alternating Current (AC) and the future direct current (DC), zonal electrical distribution ...

  12. The design of a hybrid DC motor/SMA actuated robotic hand based on physiological and anatomical synergies

    E-Print Network [OSTI]

    Rosmarin, Josiah Benjamin

    2008-01-01T23:59:59.000Z

    A new approach to the design and control of multi-fingered hands using hybrid DC motor-Shape Memory Alloy (SMA) array actuators is presented in this thesis. The fundamental design concept is based on the principle of motor ...

  13. A High Frequency Isolated Current-fed Bidirectional DC/AC Converter For Grid-Tied Energy Storage System

    E-Print Network [OSTI]

    King Jet, TSENG

    2013-01-01T23:59:59.000Z

    tied energy storage systems (ESS) will be voltage to a high-DC/AC converter to interface ESS based on low voltage cellscharging and discharging of the ESS and the control strategy

  14. Impact of Input Voltage Sag and Unbalance on DC Link Inductor and Capacitor Stress in Adjustable Speed Drives

    E-Print Network [OSTI]

    Lipo, Thomas

    , outages, voltage surges and sags. Power quality problems induced in adjustable-speed drives (ASDs) have (120 Hz for 60 Hz system) that increases the electrical stresses on the dc bus choke inductor (if used

  15. Residential Energy Efficiency Research Planning Meeting Summary Report: Washington, D.C. - October 27-28, 2011

    SciTech Connect (OSTI)

    Not Available

    2012-02-01T23:59:59.000Z

    This report summarizes key findings and outcomes from the U.S. Department of Energy's Building America Residential Energy Efficiency Research Planning meeting, held on October 28-29, 2011, in Washington, D.C.

  16. Design and performance evaluation of an electric go-kart and custom permanent magnet brushless DC motor

    E-Print Network [OSTI]

    Davis, Eli Marc

    2012-01-01T23:59:59.000Z

    This undergraduate thesis documents the design considerations and specifications of building a personal battery-powered go-kart. This includes designing and building a custom brushless DC motor for use in the drivetrain. ...

  17. A Generalized Class of Stationary Frame-Current Controllers for Grid-Connected AC–DC Converters

    E-Print Network [OSTI]

    Hwang, J. George

    Within power systems, high-power pulsewidth-modulated ac-dc converters are used in flexible ac transmission systems controllers and for interfacing renewable energy sources to the grid. These converters traditionally ...

  18. 232 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 17, NO. 2, MARCH 2002 Current Control Strategy for Brushless DC Motors

    E-Print Network [OSTI]

    Catholic University of Chile (Universidad CatĂłlica de Chile)

    synchronous motor (PMSM), which is fed with sinusoidal currents 2) brushless dc motor (BDCM), which is fed, the power-to-weight ratio of PMSM and BDCM is higher than equivalent squirrel cage induction machines

  19. www.lib.mtu.edu | Phone: 906-487-2500 | Fax: 906-487-2357 J. R. Van Pelt and Opie Library

    E-Print Network [OSTI]

    www.lib.mtu.edu | Phone: 906-487-2500 | Fax: 906-487-2357 J. R. Van Pelt and Opie Library J. R. VAN PELT AND OPIE LIBRARY DIRECTORY & FLOOR MAPS FIRST FLOOR · CIRCULATION BOOK RETURN CHECKOUT COURSE Revision #6: 8-6-2009 #12;www.lib.mtu.edu | Phone: 906-487-2500 | Fax: 906-487-2357 J. R. Van Pelt and Opie

  20. Possibilities for Measurement and Compensation of Stray DC Electric Fields Acting on Drag-Free Test Masses

    E-Print Network [OSTI]

    W. J. Weber; L. Carbone; A. Cavalleri; R. Dolesi; C. D. Hoyle; M. Hueller; S. Vitale

    2003-09-13T23:59:59.000Z

    DC electric fields can combine with test mass charging and thermal dielectric voltage noise to create significant force noise acting on the drag-free test masses in the LISA (Laser Interferometer Space Antenna) gravitational wave mission. This paper proposes a simple technique to measure and compensate average stray DC potentials at the mV level, yielding substantial reduction in this source of force noise. We discuss the attainable resolution for both flight and ground based experiments.

  1. Dutch Company Powers Streetlights With Living Plants; Will Your...

    Open Energy Info (EERE)

    Dutch Company Powers Streetlights With Living Plants; Will Your Cell Phone Be Next? Home > Groups > OpenEI Community Central Dc's picture Submitted by Dc(266) Contributor 16...

  2. Brookings-Google Plug-in Hybrid Summit, Washington, DC, July 2008 Version date: September 7, 2008

    E-Print Network [OSTI]

    Kammen, Daniel M.

    -3050 Energy and Resources Group Goldman School of Public Policy * Corresponding author. Phone: 510, reduce petroleum consumption, and expand competition in the transportation fuels sector. Several-in Hybrid Electric Vehicles Daniel M. Kammen,* , Derek M. Lemoine , Samuel M. Arons and Holmes Hummel Energy

  3. INFORMATION 918-594-8164 Tulsa

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    CONTACT INFORMATION PHONE: 918-594-8164 ­ Tulsa 405-744-5237 - Stillwater EMAIL: tulsa.graduation@okstate.edu INTERNET: http://www.osu- tulsa.okstate.edu/graduation/index .asp http://commencement.okstate.edu SPECIAL NEEDS: 918-594-8354 BOOKSTORE: 918-594-8150 ­ Tulsa 405-744-5237 - Stillwater 700 N Greenwood Ave Tulsa

  4. INFORMATION 918-594-8164 Tulsa

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    CONTACT INFORMATION PHONE: 918-594-8164 ­ Tulsa 405-744-5237 - Stillwater EMAIL: tulsa.graduation@okstate.edu INTERNET: http://commencement.okstate.edu SPECIAL NEEDS: 918-594-8354 BOOKSTORE: 918-594-8150 ­ Tulsa 405-744-5237 - Stillwater 700 N Greenwood Ave Tulsa, OK 74106 918-594-8000 www.osu-tulsa.okstate.edu STEPS TO GRADUATION

  5. INFORMATION 918-594-8164 Tulsa

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    CONTACT INFORMATION PHONE: 918-594-8164 ­ Tulsa 405-744-5237 - Stillwater EMAIL: tulsa.graduation@okstate.edu INTERNET: http://commencement.okstate.edu SPECIAL NEEDS: 918-594-8354 BOOKSTORE: 918-594-8150 ­ Tulsa 405-744-5237 - Stillwater OSU-Stillwater Fall Commencement Saturday, December 14, 2013 700 N Greenwood Ave Tulsa, OK 74106

  6. INFORMATION 918-594-8164 Tulsa

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    CONTACT INFORMATION PHONE: 918-594-8164 ­ Tulsa 405-744-5237 - Stillwater EMAIL: tulsa.graduation@okstate.edu INTERNET: http://www.osu- tulsa.okstate.edu/graduation/index .asp http://commencement.okstate.edu SPECIAL NEEDS: 918-594-8354 BOOKSTORE: 918-594-8150 ­ Tulsa 405-744-5237 - Stillwater OSU-Tulsa Spring

  7. WASHINGTON. DC.

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj:'I,\ W C -h J Ircc.p,anc.

  8. Washington, DC'

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj:'I,\ W C -h JWJLP-~ . '-WQl.

  9. EARLY PHASE OBSERVATIONS OF EXTREMELY LUMINOUS TYPE Ia SUPERNOVA 2009dc

    SciTech Connect (OSTI)

    Yamanaka, M.; Arai, A.; Chiyonobu, S.; Fukazawa, Y.; Ikejiri, Y.; Itoh, R.; Komatsu, T.; Miyamoto, H. [Department of Physical Science, Hiroshima University, Kagamiyama 1-3-1, Higashi-Hiroshima 739-8526 (Japan); Kawabata, K. S. [Hiroshima Astrophysical Science Center, Hiroshima University, Higashi-Hiroshima, Hiroshima 739-8526 (Japan); Kinugasa, K.; Hashimoto, O.; Honda, S. [Gunma Astronomical Observatory, Takayama, Gunma 377-0702 (Japan); Tanaka, M. [Department of Astronomy, School of Science, University of Tokyo, Bunkyo-ku, Tokyo 113-0033 (Japan); Imada, A.; Kuroda, D. [Okayama Astrophysical Observatory, National Astronomical Observatory of Japan, Kamogata, Asakuchi-shi, Okayama 719-0232 (Japan); Maeda, K.; Nomoto, K. [Institute for the Physics and Mathematics of the Universe, University of Tokyo, Kashiwa (Japan); Kamata, Y. [National Astronomical Observatory of Japan, Osawa, Mitaka, Tokyo 181-8588 (Japan); Kawai, N. [Department of Physics, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8551 (Japan); Konishi, K., E-mail: myamanaka@hiroshima-u.ac.j [Institute for Cosmic Ray Research, University of Tokyo, 5-1-5, Kashiwanoha, Kashiwa, Chiba, 277-8582 (Japan)

    2009-12-20T23:59:59.000Z

    We present early phase observations in optical and near-infrared wavelengths for the extremely luminous Type Ia supernova (SN Ia) 2009dc. The decline rate of the light curve is DELTAm{sub 15}(B) = 0.65 +- 0.03, which is one of the slowest among SNe Ia. The peak V-band absolute magnitude is estimated to be M{sub V} = -19.90 +- 0.15 mag if no host extinction is assumed. It reaches M{sub V} = -20.19 +- 0.19 mag if we assume the host extinction of A{sub V} = 0.29 mag. SN 2009dc belongs to the most luminous class of SNe Ia, like SNe 2003fg and 2006gz. Our JHK{sub s} -band photometry shows that this SN is also one of the most luminous SNe Ia in near-infrared wavelengths. We estimate the ejected {sup 56}Ni mass of 1.2 +- 0.3 M{sub sun} for the no host extinction case (and of 1.6 +- 0.4 M{sub sun} for the host extinction of A{sub V} = 0.29 mag). The C II lambda6580 absorption line remains visible until a week after the maximum brightness, in contrast to its early disappearance in SN 2006gz. The line velocity of Si II lambda6355 is about 8000 km s{sup -1} around the maximum, being considerably slower than that of SN 2006gz. The velocity of the C II line is similar to or slightly less than that of the Si II line around the maximum. The presence of the carbon line suggests that the thick unburned C+O layer remains after the explosion. Spectropolarimetric observations by Tanaka et al. indicate that the explosion is nearly spherical. These observational facts suggest that SN 2009dc is a super-Chandrasekhar mass SN Ia.

  10. Pulsed DC magnetron sputtered piezoelectric thin film aluminum nitride – Technology and piezoelectric properties

    SciTech Connect (OSTI)

    Stoeckel, C., E-mail: chris.stoeckel@zfm.tu-chemnitz.de; Kaufmann, C.; Hahn, R.; Schulze, R. [Center for Microtechnologies, Chemnitz University of Technology, Chemnitz 09126 (Germany); Billep, D. [Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz 09126 (Germany); Gessner, T. [Center for Microtechnologies, Chemnitz University of Technology, Chemnitz 09126 (Germany); Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz 09126 (Germany)

    2014-07-21T23:59:59.000Z

    Pulsed DC magnetron sputtered aluminum nitride (AlN) thin films are prepared on several seed layers and at different sputtering conditions. The piezoelectric c-axis (002) orientation of the AlN is analyzed with X-ray diffraction method. The transverse piezoelectric coefficient d{sub 31} is determined with a Laser-Doppler-Vibrometer at cantilevers and membranes by analytical calculations and finite element method. Additionally, thin film AlN on bulk silicon is used to characterize the longitudinal piezoelectric charge coefficient d{sub 33}.

  11. DC superconducting quantum interference device usable in nuclear quadrupole resonance and zero field nuclear magnetic spectrometers

    DOE Patents [OSTI]

    Fan, N.Q.; Clarke, J.

    1993-10-19T23:59:59.000Z

    A spectrometer for measuring the nuclear quadrupole resonance spectra or the zero-field nuclear magnetic resonance spectra generated by a sample is disclosed. The spectrometer uses an amplifier having a dc SQUID operating in a flux-locked loop for generating an amplified output as a function of the intensity of the signal generated by the sample. The flux-locked loop circuit includes an integrator. The amplifier also includes means for preventing the integrator from being driven into saturation. As a result, the time for the flux-locked loop to recover from the excitation pulses generated by the spectrometer is reduced. 7 figures.

  12. DC superconducting quantum interference device usable in nuclear quadrupole resonance and zero field nuclear magnetic spectrometers

    DOE Patents [OSTI]

    Fan, Non Q. (San Diego, CA); Clarke, John (Berkeley, CA)

    1993-01-01T23:59:59.000Z

    A spectrometer for measuring the nuclear quadrupole resonance spectra or the zero-field nuclear magnetic resonance spectra generated by a sample is disclosed. The spectrometer uses an amplifier having a dc SQUID operating in a flux-locked loop for generating an amplified output as a function of the intensity of the signal generated by the sample. The flux-locked loop circuit includes an integrator. The amplifier also includes means for preventing the integrator from being driven into saturation. As a result, the time for the flux-locked loop to recover from the excitation pulses generated by the spectrometer is reduced.

  13. Long range temporal correlation in the chaotic oscillations of a dc glow discharge plasma

    SciTech Connect (OSTI)

    Lahiri, S. [Dinabandhu Mahavidyalaya, Bongaon, North 24 Parganas, Kolkata 743235 (India); Roychowdhury, D. [Techno India, EM4/1 Sector V, Salt Lake, Kolkata 700091 (India); Sekar Iyengar, A. N. [Plasma Physics Division, Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata 700064 (India)

    2012-08-15T23:59:59.000Z

    Long range temporal correlations in the fluctuations of the plasma floating potentials (measured using a Langmuir probe) are investigated in a dc glow discharge plasma. Keeping the neutral pressure constant, the discharge voltage was varied and at the formation of the plasma, quasi periodic oscillations were excited and on further increase of the discharge voltage they became chaotic (irregular) beyond a threshold voltage. We compared the Lyapunov exponent with the Hurst exponent obtained from R/S statistics which showed an opposite behaviour at the transition point. These results are perhaps new since we have not come across such comparative analysis for chaotic oscillations in a glow discharge plasma before.

  14. Demonstration of LED Retrofit Lamps at the Smithsonian American Art Museum, Washington, DC

    SciTech Connect (OSTI)

    Miller, Naomi J.; Rosenfeld, Scott M.

    2012-06-22T23:59:59.000Z

    This report documents observations and results obtained from a lighting demonstration project conducted under the U.S. Department of Energy GATEWAY Solid-State Lighting (SSL) Technology Demonstration Program at the Smithsonain American Art Museum in Washington, DC. LED Lamp samples were tested in the museum workshop, temporarily installed in a gallery for feedback, and ultimately replaced all traditional incandescent lamps in one gallery of modernist art at the American Art Museum and partially replacing lamps in two galleries at the Musesum's Renwick Gallery. This report describes the selection and testing process, technology challenges, perceptions, economics, energy use, and mixed results of usign LED replacement lamps in art galleries housing national treasures.

  15. Use of Facility Contractor Employees for Services to DOE in the Washington, D.C., Area

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-04-15T23:59:59.000Z

    To clarify and modify policies and procedures for management of Department of Energy (DOE) facility contractor employees located in the Washington, D.C., area. A facility contractor employee is any employee of either a contractor responsible for managing a Department-owned facility, such as a National Laboratory, or a subcontractor of such a contractor. Facility contractor means any contractor performing under a Management and Operating (M&O), Management and Integration (M&I), or Environmental Restoration Management Contractor (ERMC) contract awarded by a DOE contracting officer. Canceled by DOE O 350.2.

  16. Material flows of mobile phones and accessories in Nigeria: Environmental implications and sound end-of-life management options

    SciTech Connect (OSTI)

    Osibanjo, Oladele [Department of Chemistry, University of Ibadan, Ibadan, Oyo State (Nigeria)], E-mail: osibanjo@baselnigeria.org; Nnorom, Innocent Chidi [Department of Industrial Chemistry, Abia State University Uturu (Nigeria)

    2008-02-15T23:59:59.000Z

    Presently, Nigeria is one of the fastest growing Telecom markets in the world. The country's teledensity increased from a mere 0.4 in 1999 to 10 in 2005 following the liberalization of the Telecom sector in 2001. More than 25 million new digital mobile lines have been connected by June 2006. Large quantities of mobile phones and accessories including secondhand and remanufactured products are being imported to meet the pent-up demand. This improvement in mobile telecom services resulted in the preference of mobile telecom services to fixed lines. Consequently, the contribution of fixed lines decreased from about 95% in year 2000 to less than 10% in March 2005. This phenomenal progress in information technology has resulted in the generation of large quantities of electronic waste (e-waste) in the country. Abandoned fixed line telephone sets estimated at 120,000 units are either disposed or stockpiled. Increasing quantities of waste mobile phones estimated at 8 million units by 2007, and accessories will be generated. With no material recovery facility for e-waste and/or appropriate solid waste management infrastructure in place, these waste materials end up in open dumps and unlined landfills. These practices create the potential for the release of toxic metals and halocarbons from batteries, printed wiring boards, liquid crystal display and plastic housing units. This paper presents an overview of the developments in the Nigerian Telecom sector, the material in-flow of mobile phones, and the implications of the management practices for wastes from the Telecom sector in the country.

  17. The 100,000 amp dc power supply for a staged hadron collider superferric magnet

    SciTech Connect (OSTI)

    Hays, Steven L.; Claypool, Bradley; Foster, G.William; /Fermilab

    2005-09-01T23:59:59.000Z

    A 1.5 volt 100,000 amp DC switcher power supply was developed for testing a superferric magnet string at FNAL. This supply was used during testing as both the ramping supply and holding supply powering a single magnet load with a total load resistance of 0.7{micro} Ohms. The supply consists of ten paralleled switcher cells, powered by a 400 volt/600 Amp DC power supply. Each cell consists of an IGBT H-bridge driving a step-down transformer at a switching frequency of 2 kHz. The transformer has an effective turns ratio of 224:1. The secondary consists of 32 parallel single-turn full wave rectifier windings. The rectification is done with 64 Shottky diodes. Each cell is rated at 1.5 volts/10,000 amps. During this test each cell was operated as a constant power source without load current or field feedback. This paper will describe the design of the switcher cell and control system used during testing. We will also describe the next level of improvements to the current feedback system to improve the ramp control.

  18. INFORMATION: Audit Report on The Office of Secure Transportation DC-9 Aircraft Refurbishment

    SciTech Connect (OSTI)

    None

    2009-05-01T23:59:59.000Z

    The National Nuclear Security Administration's (NNSA) Office of Secure Transportation (OST) maintains a fleet of seven aircraft to transport sensitive items, equipment and security personnel. Based on increasing requirements for transporting components and security personnel, OST decided to add a heavy transport aircraft to meet the Department's weapons surety and emergency response missions. In 2004, as a replacement following the sale of a portion of its fleet, OST acquired a DC-9 cargo aircraft that had been excessed by the U.S. military. Prior to integrating the DC-9 into its fleet, NNSA ordered a refurbishment of the aircraft. This refurbishment project was to permit the aircraft to be certified to civil air standards so that it could transport passengers for site visits, training and other travel. The NNSA Service Center (Service Center) awarded a contract for the refurbishment of the aircraft in December 2004. In recent years, the Office of Inspector General has addressed a number of issues relating to the Department's aircraft management activities and services. As part of our ongoing review process and because of the national security importance of its fleet of aircraft, we conducted this review to determine whether OST had an effective and efficient aviation management program.

  19. Drive laser system for the DC-SRF photoinjector at Peking University

    E-Print Network [OSTI]

    Wang, Zhiwen; Lin, Lin; Zhao, Gang; Quan, Shengwen; Liu, Kexin; Chen, Jiaer

    2015-01-01T23:59:59.000Z

    Photoinjectors are widely used for linear accelerators as electron sources to generate high-brightness electron beam. Drive laser, which determines the timing structure and quality of the electron beam, is a crucial device of photoinjector. A new drive laser system has been designed and constructed for the upgraded 3.5-cell DC-SRF photoinjector at Peking University. The drive laser system consists of a 1064 nm laser oscillator, a four- stage amplifier, the second and fourth harmonic generators, the optical system to transfer the UV pulses to the photocathode, and the synchronization system. The drive laser system has been successfully applied in the stable operation of DC-SRF photoinjector and its performance meets the requirements. 266 nm laser with an average power close to 1W can be delivered to illuminate the Cs2Te photocathode and the instability is less than 5% for long time operation. The design consideration for improving the UV laser quality, a detailed description of laser system, and its performanc...

  20. Home About UsContributeBookstore Advertising Subscribe for Free NOW!

    E-Print Network [OSTI]

    Rogers, John A.

    with a citric acid-hydrogen peroxide solution created an array of rectangular columns. Separate device levels. Separately, Semprius is developing micro-transfer printing technology to create concentrator photovoltaic, and photovoltaic (PV) cells. In one case, all three device-type layers were produced on a single substrate (Figure

  1. Frequency multiplexed flux locked loop architecture providing an array of DC SQUIDS having both shared and unshared components

    DOE Patents [OSTI]

    Ganther, Jr., Kenneth R. (Olathe, KS); Snapp, Lowell D. (Independence, MO)

    2002-01-01T23:59:59.000Z

    Architecture for frequency multiplexing multiple flux locked loops in a system comprising an array of DC SQUID sensors. The architecture involves dividing the traditional flux locked loop into multiple unshared components and a single shared component which, in operation, form a complete flux locked loop relative to each DC SQUID sensor. Each unshared flux locked loop component operates on a different flux modulation frequency. The architecture of the present invention allows a reduction from 2N to N+1 in the number of connections between the cryogenic DC SQUID sensors and their associated room temperature flux locked loops. Furthermore, the 1.times.N architecture of the present invention can be paralleled to form an M.times.N array architecture without increasing the required number of flux modulation frequencies.

  2. A new control strategy to improve the performance of PWM ac to dc converter under unbalanced operating condition 

    E-Print Network [OSTI]

    Choudhury, Shamim A.

    1992-01-01T23:59:59.000Z

    A NEW CONTROL STRATEGY TO IMPROVE THE PERFORMANCE OF PWM AC TO DC CONVERTER UNDER UNBALANCED OPERATING CONDITION A Thesis by SHAMIM A. CHOUDHURY Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment... of the requirements for the degree of MASTER 0 F S CIE'VCE t&fay 1992 Major Subject: Electrical Engineering A NEW CONTROL STRATEGY TO IMPROVE THE PERFORMANCE OF PWM AC TO DC CONVERTER UNDER UNBALANCED OPERATING CONDITION A Thesis by SHAMIM A. CHOUDHURY...

  3. 2/1/2014 Technologyuses micro-windmills to recharge cell phones http://www.eurekalert.org/pub_releases/2014-01/uota-tum011014.php 1/2

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    to cell phone batteries constantly in need of recharging and home energy generation where large windmills2/1/2014 Technologyuses micro-windmills to recharge cell phones http://www.eurekalert.org/pub_releases/2014-01/uota-tum011014.php 1/2 PUBLIC RELEASE DATE: IMAGE: This is a photo of Dr. Smitha Rao. Click

  4. A Pseudomonas syringae pv. tomato DC3000 mutant lacking the type III effector HopQ1-1 is able to cause disease in the

    E-Print Network [OSTI]

    A Pseudomonas syringae pv. tomato DC3000 mutant lacking the type III effector HopQ1-1 is able-first authors. Summary The model pathogen Pseudomonas syringae pv. tomato DC3000 causes bacterial speck of an avirulence determinant in N. benthamiana: expression in the tobacco wildfire pathogen P. syringae pv. tabaci

  5. Modeling a short dc discharge with thermionic cathode and auxiliary anode

    SciTech Connect (OSTI)

    Bogdanov, E. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); University ITMO, Kronverkskiy pr. 49, St. Petersburg 197101 (Russian Federation); Demidov, V. I. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation) [St. Petersburg State University, St. Petersburg 199034 (Russian Federation); West Virginia University, Morgantown, West Virginia 26506 (United States); Kaganovich, I. D. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States)] [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Koepke, M. E. [West Virginia University, Morgantown, West Virginia 26506 (United States)] [West Virginia University, Morgantown, West Virginia 26506 (United States); Kudryavtsev, A. A. [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)] [St. Petersburg State University, St. Petersburg 199034 (Russian Federation)

    2013-10-15T23:59:59.000Z

    A short dc discharge with a thermionic cathode can be used as a current and voltage stabilizer, but is subject to current oscillation. If instead of one anode two anodes are used, the current oscillations can be reduced. We have developed a kinetic model of such a discharge with two anodes, where the primary anode has a small opening for passing a fraction of the discharge current to an auxiliary anode. The model demonstrates that the current-voltage relationship of the discharge with two anodes is characterized everywhere by positive slope, i.e., positive differential resistance. Therefore, the discharge with two anodes is expected to be stable to the spontaneous oscillation in current that is induced by negative differential resistance. As a result, such a discharge can be used in an engineering application that requires stable plasma, such as a current and voltage stabilizer.

  6. Point of collapse and continuation methods for large ac/dc systems

    SciTech Connect (OSTI)

    Canizares, C.A. (Escuela Politecnica Nacional, Quito (Ecuador)); Alvarado, F.L. (Univ. of Wisconsin, Madison, WI (United States))

    1993-02-01T23:59:59.000Z

    This paper describes the implementation of both Point of Collapse (PoC) methods and continuation methods for the computation of voltage collapse points (saddle-node bifurcations) in large ac/dc systems. A comparison of the performance of these methods is presented for real systems of up to 2,158 buses. The paper discusses computational details of the implementation of the PoC and continuation methods, and the unique challenges encountered due to the presence of high voltage direct current (HVDC) transmission, area interchange power control regulating transformers, and voltage and reactive power limits. The characteristics of a robust PoC power flow program are presented, and its application to detection and solution of voltage stability problems is demonstrated.

  7. TiN coated aluminum electrodes for DC high voltage electron guns

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mamun, Md Abdullah A.; Elmustafa, Abdelmageed A.; Taus, Rhys; Forman, Eric; Poelker, Matthew

    2015-05-01T23:59:59.000Z

    Preparing electrodes made of metals like stainless steel, for use inside DC high voltage electron guns, is a labor-intensive and time-consuming process. In this paper, the authors report the exceptional high voltage performance of aluminum electrodes coated with hard titanium nitride (TiN). The aluminum electrodes were comparatively easy to manufacture and required only hours of mechanical polishing using silicon carbide paper, prior to coating with TiN by a commercial vendor. The high voltage performance of three TiN-coated aluminum electrodes, before and after gas conditioning with helium, was compared to that of bare aluminum electrodes, and electrodes manufactured from titanium alloymore »(Ti-6Al-4V). Following gas conditioning, each TiN-coated aluminum electrode reached ?225?kV bias voltage while generating less than 100?pA of field emission (« less

  8. Electrochromic properties of niobium oxide thin films prepared by DC magnetron sputtering

    SciTech Connect (OSTI)

    Yoshimura, Kazuki; Miki, Takeshi; Tanemura, Sakae [National Industrial Research Inst., Nagoya (Japan)

    1997-09-01T23:59:59.000Z

    Niobium oxide electrochromic thin films were prepared by reactive DC magnetron sputtering and their electrochromic properties for Li intercalation and durability were studied. Chronoamperometric analyses revealed that the extended space-charge limited model by Zhang et al. is applicable to Nb{sub 2}O{sub 5} films. Crystallized Nb{sub 2}O{sub 5} films showed excellent electrochromism and stability over many coloration-bleaching cycles. The best performance was obtained for films with a substrate temperature of 500 C and an oxygen flow rate of 10 sccm. Electrochromic materials enable dynamic control of the throughput of radiant energy, and play a significant role in energy-efficient smart windows in order to reduce the cooling and lighting costs of buildings.

  9. DC CICC retrofit magnet preliminary design, software development and analysis report

    SciTech Connect (OSTI)

    Myatt, R.L.; Marston, P.G.

    1992-02-10T23:59:59.000Z

    The proposed retrofit coil is made of superconducting Cable-in-Conduit Conductor (CICC). The coils are designed to produce a nominal vertical field of 4.5 tesla within the MHD channel based on a nominal current density of 13.05 MA/m{sup 2}. The coils are supported within a case, or so-called constant tension strap. When the magnet is energized, the electromagnetic J {times} B body forces push the winding pack laterally outward and vertically towards the machine's midplane, thus putting the strap in tension. The end turns add axial tension to the conductor (a condition which is not simulated by this 2-D model of the midlength cross section). A sketch of the magnet system and structure is shown in Fig. 1.0-1. The purpose of this report is to describe the progress made in the design and analysis of the DC CICC retrofit magnet, and to outline the proposed next step.

  10. DC CICC retrofit magnet preliminary design, software development and analysis report. Quarterly progress report

    SciTech Connect (OSTI)

    Myatt, R.L.; Marston, P.G.

    1992-01-01T23:59:59.000Z

    The proposed retrofit coil is made of superconducting Cable-in-Conduit Conductor (CICC). The coils are designed to produce a nominal vertical field of 4.5 tesla within the MHD channel based on a nominal current density of 13.05 MA/m{sup 2}. The coils are supported within a case, or so-called constant tension strap. When the magnet is energized, the electromagnetic J x B body forces push the winding pack laterally outward and vertically towards the machine`s midplane, thus putting the strap in tension. The end turns add axial tension to the conductor (a condition which is not simulated by this 2-D model of the midlength cross section). A sketch of the magnet system and structure is shown in Fig. 1.0--1. The purpose of this report is to describe the progress made in the design and analysis of the DC CICC retrofit magnet.

  11. Volatilization and redox testing in a DC arc melter: FY-93 and FY-94

    SciTech Connect (OSTI)

    Grandy, J.D.; Sears, J.W.; Soelberg, N.R.; Reimann, G.A.; McIlwain, M.E.

    1996-07-01T23:59:59.000Z

    The purpose of these experiments was to study the dissolution, retention, volatilization, and trapping of transuranic radionuclide elements (TRUs), mixed fission and activation products, and high vapor pressure metals (HVPMS) during processing in a high temperature arc furnace. In all cases, surrogate elements (lanthanides) were used in place of radioactive ones. The experiments were conducted utilizing a small DC arc melter developed at the Idaho National Engineering Laboratory (INEL) Research Center (IRC). The small arc melter was originally developed in 1992 and has been used previously for waste form studies of iron enriched basalt (IEB) and IEB with zirconium and titanium additions (IEB4). Section 3 contains a description of the small arc melter and its operational capabilities are discussed in Chapter 4. The remainder of the document describes each testing program and then discusses results and findings.

  12. Control method for peak power delivery with limited DC-bus voltage

    DOE Patents [OSTI]

    Edwards, John; Xu, Longya; Bhargava, Brij B.

    2006-09-05T23:59:59.000Z

    A method for driving a neutral point-clamped multi-level voltage source inverter supplying a synchronous motor is provided. A DC current is received at a neutral point-clamped multi-level voltage source inverter. The inverter has first, second, and third output nodes. The inverter also has a plurality of switches. A desired speed of a synchronous motor connected to the inverter by the first second and third nodes is received by the inverter. The synchronous motor has a rotor and the speed of the motor is defined by the rotational rate of the rotor. A position of the rotor is sensed, current flowing to the motor out of at least two of the first, second, and third output nodes is sensed, and predetermined switches are automatically activated by the inverter responsive to the sensed rotor position, the sensed current, and the desired speed.

  13. Meeting Summary Advanced Light Water Reactor Fuels Industry Meeting Washington DC October 27 - 28, 2011

    SciTech Connect (OSTI)

    Not Listed

    2011-11-01T23:59:59.000Z

    The Advanced LWR Fuel Working Group first met in November of 2010 with the objective of looking 20 years ahead to the role that advanced fuels could play in improving light water reactor technology, such as waste reduction and economics. When the group met again in March 2011, the Fukushima incident was still unfolding. After the March meeting, the focus of the program changed to determining what we could do in the near term to improve fuel accident tolerance. Any discussion of fuels with enhanced accident tolerance will likely need to consider an advanced light water reactor with enhanced accident tolerance, along with the fuel. The Advanced LWR Fuel Working Group met in Washington D.C. on October 72-18, 2011 to continue discussions on this important topic.

  14. Potential for a cycling steam power plant with TES to supply district heating in Washington DC

    SciTech Connect (OSTI)

    Hobson, M.J.

    1984-02-01T23:59:59.000Z

    The Energy Office of the District of Columbia is planning the conversion of a 1500 TPD incinerator for district heating and the generation of electric power for sale to the local utility, PEPCO. This paper records a preliminary evaluation of whether hot water storage would be appropriate at the heat source plant to maximize power sales and improve the reliability of the district heat service. Hot water storage is being employed successfully at Herning, Denmark, in conjunction with a cogeneration plant heat source, and this concept is adapted to Washington D.C. area needs for heating and cooling service. Heat storage allows a 7% increase in power sales based on a simplified approach to daily load profiles and PEPCO's proposed avoided cost rates. Pressurized storage is uneconomic due to the high cost of containment, but atmospheric storage at 200F shows a simple payback of 5 years.

  15. Experimental results from a DC photocathode electron gun for an IR FEL

    SciTech Connect (OSTI)

    Kehne, D.; Engwall, D.; Legg, R.; Shinn, M.

    1997-10-01T23:59:59.000Z

    A 350 keV DC photocathode gun capable of delivering the high-brightness CW electron beam necessary for Jefferson Lab`s infrared free-electron laser is described. The gun is to be used with a superconducting radiofrequency linac operating at 1.497 GHz and is mode-locked to the 40th subharmonic of the fundamental using a Nd:YLF drive laser. The gun provides 20--25 ps bunches at up to 135 pC/bunch. Experimental measurements of transverse and longitudinal beam properties are presented. Transverse emittance is measured using a slit-wire scanner emittance meter, and energy spread is measured using the slit and a spectrometer magnet. Longitudinal emittance is measured using a combination of sampling aperture, kicker cavity, slit and spectrometer. Measurements for bunch charges of 135 pC are described and compared with simulations.

  16. Transcatheter Treatment of Hepatocellular Carcinoma with Doxorubicin-loaded DC Bead (DEBDOX): Technical Recommendations

    SciTech Connect (OSTI)

    Lencioni, Riccardo, E-mail: riccardo.lencioni@med.unipi.it [Pisa University Hospital, University of Pisa, Division of Diagnostic Imaging and Intervention (Italy); Baere, Thierry de [Institut Gustav-Roussy, Department of Interventional Radiology (France); Burrel, Marta [Barcelona Clinic for Liver Cancer, Hospital Clinic, Department of Radiology (Spain); Caridi, James G. [University of Florida, Division of Interventional Radiology (United States); Lammer, Johannes [Medical University of Vienna, Department of Interventional Radiology (Austria); Malagari, Katerina [University of Athens, Department of Radiology (Greece); Martin, Robert C. G. [University of Louisville, Division of Surgical Oncology (United States); O'Grady, Elizabeth [University Hospital Aintree, Department of Radiology (United Kingdom); Real, Maria Isabel [Barcelona Clinic for Liver Cancer, Hospital Clinic, Department of Radiology (Spain); Vogl, Thomas J. [University of Frankfurt, Department of Radiology (Germany); Watkinson, Anthony [Royal Devon and Exeter Hospital, Department of Interventional Radiology (United Kingdom); Geschwind, Jean-Francois H. [Johns Hopkins University, Division of Interventional Radiology (United States)

    2012-10-15T23:59:59.000Z

    Tranarterial chemoembolization (TACE) has been established by a meta-analysis of randomized controlled trials as the standard of care for nonsurgical patients with large or multinodular noninvasive hepatocellular carcinoma (HCC) isolated to the liver and with preserved liver function. Although conventional TACE with administration of an anticancer-in-oil emulsion followed by embolic agents has been the most popular technique, the introduction of embolic drug-eluting beads has provided an alternative to lipiodol-based regimens. Experimental studies have shown that TACE with drug-eluting beads has a safe pharmacokinetic profile and results in effective tumor killing in animal models. Early clinical experiences have confirmed that drug-eluting beads provide a combined ischemic and cytotoxic effect locally with low systemic toxic exposure. Recently, the clinical value of a TACE protocol performed by using the embolic microsphere DC Bead loaded with doxorubicin (DEBDOX; drug-eluting bead doxorubicin) has been shown by randomized controlled trials. An important limitation of conventional TACE has been the inconsistency in the technique and the treatment schedules. This limitation has hampered the acceptance of TACE as a standard oncology treatment. Doxorubicin-loaded DC Bead provides levels of consistency and repeatability not available with conventional TACE and offers the opportunity to implement a standardized approach to HCC treatment. With this in mind, a panel of physicians took part in a consensus meeting held during the European Conference on Interventional Oncology in Florence, Italy, to develop a set of technical recommendations for the use of DEBDOX in HCC treatment. The conclusions of the expert panel are summarized.

  17. 199/07/Tuesday 17h37Oasis, The Online Abstract Submission System Page 1 sur 2https://www.abstractsonline.com/submit/SubmitPrinterFriendly...%7D&MKey=%7B66F0352A%2D30DC%2D4B9F%2DB0CC%2DE851495B78DC%7D

    E-Print Network [OSTI]

    Demoulin, Pascal

    199/07/Tuesday 17h37Oasis, The Online Abstract Submission System Page 1 sur 2https):  Oral Preferred Additional Information (Complete): Status: Complete #12;199/07/Tuesday 17h37Oasis://www.abstractsonline.com/submit/SubmitPrinterFriendly...%7D&MKey=%7B66F0352A%2D30DC%2D4B9F%2DB0CC%2DE851495B78DC%7D Washington, DC 20009 Powered by OASIS

  18. 650 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 26, NO. 2, APRIL 2011 Hourly Scheduling of DC Transmission Lines in

    E-Print Network [OSTI]

    Fu, Yong

    Transmission Lines in SCUC With Voltage Source Converters Azim Lotfjou, Mohammad Shahidehpour, Fellow, IEEE transmission lines, se- curity-constrained unit commitment, voltage-source converters. NOMENCLATURE Index of ac;LOTFJOU et al.: HOURLY SCHEDULING OF DC TRANSMISSION LINES 651 , Vector of real and reactive power

  19. Amorphous Silicon Thin-Film Transistors with DC Saturation Current Half-Life of More than 100 Years

    E-Print Network [OSTI]

    as the time for the TFT drain current to fall by 50% under DC voltage bias in saturation, the half with either back-channel etched (BCE) or back-channel passivated (BCP) structures (Fig. 1). The BCP structure passivates the back-side of the TFT channel "in situ" at the cost of an extra mask step. The gate nitride

  20. In Proc of Direct Methanol Fuel Cell Symposium, 199th Electrochem.l Soc. Mtg, Washington DC, 3/01.

    E-Print Network [OSTI]

    Wang, Chao-Yang

    In Proc of Direct Methanol Fuel Cell Symposium, 199th Electrochem.l Soc. Mtg, Washington DC, 3/01. MATHEMATICAL MODELING OF LIQUID-FEED DIRECT METHANOL FUEL CELLS Z. H. Wang and C. Y. Wang Electrochemical methanol fuel cells (DMFC). Diffusion and convection of both gas and liquid phases are considered

  1. National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal

    E-Print Network [OSTI]

    Mathis, Wayne N.

    National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal Submission to Museum Stores National Museum of the American Indian (NMAI) Our Museum Stores your craft for sale in our Museum Stores, vendor shall be responsible for complying with all applicable

  2. National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal/ Jewelry

    E-Print Network [OSTI]

    Mathis, Wayne N.

    National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal/ Jewelry Submission to Museum Stores National Museum of the American Indian (NMAI) Our Museum Institution your craft for sale in our Museum Stores, vendor shall be responsible for complying with all

  3. National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal/Books & Media

    E-Print Network [OSTI]

    Mathis, Wayne N.

    National Museum of the American Indian Museum Stores Washington, D.C. & New York Vendor Product Proposal/Books & Media Submission to Museum Stores National Museum of the American Indian (NMAI) Our Museum Institution your craft for sale in our Museum Stores, vendor shall be responsible for complying with all

  4. NASA HISTORY: NEWS. & NOTES NASA History Office . NASA Headquarters . Washington, D.C. 20546' Winter 1984-85

    E-Print Network [OSTI]

    NASA HISTORY: NEWS. & NOTES NASA History Office . NASA Headquarters . Washington, D.C. 20546--project Viking- s told in Linda N. l')zell and F,dward C. ~zell, On Mars: F.xploration of the Red Planet, Ig58 History Office, starting FY 85, plans to fund the research and writing of a publishable history either

  5. Minimization of DC Reactor and Operation Characteristics of Direct-Power-Controlled Current-Source PWM Rectifier

    E-Print Network [OSTI]

    Fujimoto, Hiroshi

    Minimization of DC Reactor and Operation Characteristics of Direct-Power-Controlled Current describes a direct-power-controlled current-source PWM rectifier, and presents operation characteristics modes on the basis of a relay control technique of instantaneous active and reactive power, using

  6. November 18, 2008 1 Abstract--In this paper, we analyze the N-1 reliable DC optimal

    E-Print Network [OSTI]

    Ferris, Michael C.

    of the transmission element (line or transformer) and the model can be used for planning and/or operations. We or transformer) g: generator d: load c: operating state; c = 0 indicates the no contingency state (steady- stateNovember 18, 2008 1 Abstract--In this paper, we analyze the N-1 reliable DC optimal dispatch

  7. Sources of Bioavailable Toxic Pollutants in the Anacostia Final Report to the DC Water Resources Research Center

    E-Print Network [OSTI]

    District of Columbia, University of the

    Sources of Bioavailable Toxic Pollutants in the Anacostia Final Report to the DC Water Resources (PCBS, PAHS, Aroclors, pesticides and five metals) using the locally available Asiatic Clam, Corbicula chlordane) were significently greater at the Northeast Branch. Total accumulated PAHs significantly exceeded

  8. Characterization of heterogeneous near-surface materials by joint 2D inversion of dc resistivity and seismic data

    E-Print Network [OSTI]

    Meju, Max

    multidimensional non- invasive dc resistivity and seismic refraction investigations of the near-surface have and seismic data Luis A. Gallardo1 and Max A. Meju Department of Environmental Science, Lancaster University-gradients of electrical resistivity and seismic velocity as constraints so as to investigate more precisely

  9. Abscisic acid-dependent and -independent expression of the carrot LEA class gene Dc3 in transgenic tobacco seedlings

    E-Print Network [OSTI]

    Siddiqui, Najeeb Ullah

    1997-01-01T23:59:59.000Z

    We studied the expression of three promoter deletion mutants (A218, A599, and A1312) of the Late Embryo Abundant (LEA) class gene Dc3 fused to the reporter gene, B-glucuronidase (GUS) in 14 d old transgenic tobacco seedlings. Seedlings were...

  10. COMPLETELY DC-FREE DIRECT SEQUENCE SPECTRUM SPREADING SCHEME FOR LOW POWER, LOW COST, DIRECT CONVERSION TRANSCEIVER

    E-Print Network [OSTI]

    Lee, Thomas H.

    call the offset code spreading scheme. By employing the scheme, we can implement a direct- conversion- level design. The direct conversion receiver architecture combined with D-BPSK (differential, there are some design problems. In a direct conversion receiver, DC offset due to carrier leakage and 1/f mixer

  11. For presentation at the Fuel Cell Projects Kickoff Meeting, DOE Headquarters, Washington DC, September 30 October 1, 2009.

    E-Print Network [OSTI]

    the commercialization of fuel cell technology. · The validated transport model can be employed to improve and optimize1 For presentation at the Fuel Cell Projects Kickoff Meeting, DOE Headquarters, Washington DC Fuel Cells Fuel Cell Projects Kickoff Meeting September 30 - October 1, 2009 Presented by: Ken S

  12. Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004 University of Wisconsin-Madison

    E-Print Network [OSTI]

    1 Superconductivity for Electric Systems Annual Peer Review Washington, DC July 27-29, 2004. Gurevich, D. C. Larbalestier Industrial partner: American Superconductor Corporation Funding: ORNL: 225 k$ (DOE) LANL: 200 k$ (DOE) UW: 200 k$ (DOE, AFOSR-MURI) #12;2 Superconductivity for Electric Systems

  13. Superconductivity for Electric Systems Annual Peer Review Washington, DC July 23-25, 2003 OAK RIDGE NATIONAL LABORATORY

    E-Print Network [OSTI]

    Superconductivity for Electric Systems Annual Peer Review Washington, DC ­ July 23-25, 2003 OAK RIDGE NATIONAL LABORATORY U. S. DEPARTMENT OF ENERGY American Superconductor Corporation M. W. Rupich, D-in ORNL-AMSC CRADA: Development of 2G YBCO-RABiTS Wires #12;Superconductivity for Electric Systems Annual

  14. Improvement of power supply EMC by chaos J.H.B. Deane and D.C. Hamill

    E-Print Network [OSTI]

    Deane, Jonathan

    Improvement of power supply EMC by chaos J.H.B. Deane and D.C. Hamill Department of Electronic is spread, its peaks are reduced and EMC is improved, compared to the case when the circuit is operating consisting of the switching frequency and many harmonics. Such interference poses significant EMC problems

  15. 1. INTRODUCTION SPICE is a general-purpose circuit simulation program for nonlinear dc, nonlinear transient, and

    E-Print Network [OSTI]

    transient, and linear ac analyses. Circuits may contain resistors, capacitors, inductors, mutual inductors operating point of the circuit with inductors shorted and capacitors opened. The dc analysis options and determines linearized, small-signal models for all of the nonlinear devices in the circuit. The resultant

  16. ENGR 201 Electrical Fundamentals I Catalog Description: Analysis of linear circuits. Circuit laws and theorems. DC response of

    E-Print Network [OSTI]

    ENGR 201 ­ Electrical Fundamentals I Catalog Description: Analysis of linear circuits. Circuit laws and laws · Methods of analysis (e.g., nodal, mesh) · Circuit theorems · Operational amplifiers · Capacitors, and apply these for the analysis of dc circuits (ABET outcomes: A, e, m) 4. Analyze circuits made up

  17. TRANSVERSE AEOLIAN RIDGES ON MARS: DISTRIBUTION, ORIENTATIONS, AND AGES. D.C. , M.R. Balme1

    E-Print Network [OSTI]

    Bourke, Mary C.

    TRANSVERSE AEOLIAN RIDGES ON MARS: DISTRIBUTION, ORIENTATIONS, AND AGES. D.C. Berman1 , M.R. Balme1 , M.C. Bourke1 , S. Rafkin3 , and J.R. Zimbelman2 , 1 Planetary Science Institute, 1700 E. Ft. Lowell' [1]. Figure 1. Percent areal coverage of TARs in MOC images for northern hemisphere. White dots

  18. 30486 Federal Register / Vol. 77, No. 100 / Wednesday, May 23, 2012 / Proposed Rules Washington, DC or may be purchased

    E-Print Network [OSTI]

    of Petitions Filed: 3. Federal Communications Commission. Marlene H. Dortch, Secretary, Office of the Secretary30486 Federal Register / Vol. 77, No. 100 / Wednesday, May 23, 2012 / Proposed Rules Washington, DC or may be purchased from the Commission's copy contractor, Best Copy and Printing, Inc. (BCPI) (1

  19. ISIT2001, Washington, DC, June 24{29, 2001 Deriving Performance Bounds for ISI Channels using Gallager Codes

    E-Print Network [OSTI]

    Kavcic, Aleksandar

    ISIT2001, Washington, DC, June 24{29, 2001 Deriving Performance Bounds for ISI Channels using) codes over binary inter- symbol interference (ISI) channels. In contrast to pre- vious work on memoryless channels, the noise toler- ance thresholds for ISI channels depend on the trans- mitted sequences

  20. Inductorless DC-AC Cascaded H-bridge Multilevel Boost Inverter for Electric/Hybrid Electric Vehicle

    E-Print Network [OSTI]

    Tolbert, Leon M.

    boost inverter for EV and HEV applications. Currently available power inverter systems for HEVs use a DC and EV need a traction motor and a power inverter to drive the traction motor. The power inverter is the key part of a HEV or EV. The requirements of the power inverter include high peak power and low

  1. A three-level buck converter to regulate a high-voltage DC-to-AC inverter

    E-Print Network [OSTI]

    Schrock, Kenneth C

    2008-01-01T23:59:59.000Z

    A three-level buck converter is designed and analyzed, and shown to be suitable as a high-voltage down converter as a pre-regulation stage for a 600 watt DC-to-AC power inverter. Topology selection for the inverter is ...

  2. This page shows how to use the My Pitt Video (Panopto) iOS application on an iPhone. To log in to the iOS app, swipe the screen to the right or click the menu button in the top left corner,

    E-Print Network [OSTI]

    Benos, Panayiotis "Takis"

    iPhone app iPhone app This page shows how to use the My Pitt Video (Panopto) iOS applicationPhone app View Panopto Sessions To view sessions on the My Pitt Video (Panopto) server, tap the menu button you would like the session to be stored. Enter a session name, and tap "Record a new video" and begin

  3. Benefits Office: Phone: (352) 392-2HRS Fax: (352) 392-5166 E-mail: benefits@ufl.edu Pet Insurance

    E-Print Network [OSTI]

    Mair, Bernard A.

    Benefits Office: Phone: (352) 392-2HRS Fax: (352) 392-5166 E-mail: benefits@ufl.edu Pet Insurance* Injury Plan $5/paycheck* $5/paycheck* Veterinary Pet Insurance ® Veterinary Pet Insurance® is the nation's oldest, largest and number one veterinarian-recommended pet health insurance provider. With comprehensive

  4. College of Agriculture and Life Sciences Study Abroad Office 111Curtiss Hall, Iowa State University Phone (515)294-8447 Fax (515) 294-9477

    E-Print Network [OSTI]

    Lin, Zhiqun

    College of Agriculture and Life Sciences Study Abroad Office 111Curtiss Hall, Iowa State University Phone (515)294-8447 Fax (515) 294-9477 College of Agriculture and Life Sciences Study Abroad Scholarship Study Abroad office, which are for College of Agriculture and Life Sciences students only. Please refer

  5. HC: 749 (9/13) CruzCare Enroll/Cancel Form UCSC Student Health Services Phone: (831) 459-2389 Fax: (831) 459-4050

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    HC: 749 (9/13) CruzCare Enroll/Cancel Form UCSC Student Health Services Phone: (831) 459-2389 Fax automatically to the student's account) CruzCare provides unlimited Student Health Center visits for care-ray charges, CruzCare pays for itself with a single visit to the Student Health Center. What is covered

  6. HC: 749 (7/14) CruzCare Enroll/Cancel Form UCSC Student Health Services Phone: (831) 459-2389 Fax: (831) 459-4050

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    HC: 749 (7/14) CruzCare Enroll/Cancel Form UCSC Student Health Services Phone: (831) 459-2389 Fax quarterly to the student's account) CruzCare provides unlimited Student Health Center visits for care-ray charges, CruzCare pays for itself with a single visit to the Student Health Center. What is covered

  7. E-mail: ceas-adv@UWM.edu Website: www.uwm.edu/CEAS Phone: (414) 229-4667 ELECTRICAL ENGINEERING

    E-Print Network [OSTI]

    Saldin, Dilano

    E-mail: ceas-adv@UWM.edu Website: www.uwm.edu/CEAS Phone: (414) 229-4667 ELECTRICAL ENGINEERING in Engineering (Civil, Computer, Electrical, Industrial, Materials and Mechanical) Minors Computer Science, Electrical Engineering, Industrial Engineering, Materials Engineering, Mechanical Engineering, Structural

  8. E-mail: ceas-adv@UWM.edu Website: www.uwm.edu/CEAS Phone: (414) 229-4667 INDUSTRIAL ENGINEERING

    E-Print Network [OSTI]

    Saldin, Dilano

    E-mail: ceas-adv@UWM.edu Website: www.uwm.edu/CEAS Phone: (414) 229-4667 INDUSTRIAL ENGINEERING in Engineering (Civil, Computer, Electrical, Industrial, Materials and Mechanical) Minors Computer Science, Electrical Engineering, Industrial Engineering, Materials Engineering, Mechanical Engineering, Structural

  9. E-mail: ceas-adv@UWM.edu Website: www.uwm.edu/CEAS Phone: (414) 229-4667 COMPUTER SCIENCE

    E-Print Network [OSTI]

    Saldin, Dilano

    E-mail: ceas-adv@UWM.edu Website: www.uwm.edu/CEAS Phone: (414) 229-4667 COMPUTER SCIENCE Just% doctorate Undergraduate Degrees Bachelor of Science in Computer Science Bachelor of Science in Engineering (Civil, Computer, Electrical, Industrial, Materials and Mechanical) Minors Computer Science, Electrical

  10. The Innocent Habiyaremye Fellowship Information Networking Institute --Carnegie Mellon | 4616 Henry Street Pittsburgh, PA 15213 | Phone: 412.268.7195 | www.ini.cmu.edu

    E-Print Network [OSTI]

    McGaughey, Alan

    Henry Street · Pittsburgh, PA 15213 | Phone: 412.268.7195 | www.ini.cmu.edu Information Networking Institute (INI) who embodies a sense of community spirit in his or her everyday actions, while also meeting of an INI alumnus and a native of Rwanda who inspired others through his kindness and volunteer activities

  11. ishita.garg@vanderbilt.edu, phone 615-343-8261, fax 615-343-7919 A computational approach to pre-align point cloud data for surface

    E-Print Network [OSTI]

    Miga, Michael I.

    * ishita.garg@vanderbilt.edu, phone 615-343-8261, fax 615-343-7919 A computational approach to pre-align point cloud data for surface registration in image guided liver surgery. Ishita Garg*a , Logan W are used for an initial registration. This paper presents a computational approach to obtain the initial

  12. Analysis of dc harmonics using the three-pulse model for the intermountain power project HVDC transmission

    SciTech Connect (OSTI)

    Dickmander, D.L.; Peterson, K.J.

    1989-04-01T23:59:59.000Z

    The harmonic analysis of the dc-side of an HVDC line transmission requires realistic models of the converters, the dc line, and other relevant equipment. These models must include all important paths for harmonic current, and appropriate sources of harmonic voltage generation. The classical converter modeling technique has been demonstrated to be insufficient in field measurements and analysis of the harmonic spectra found on recent HVDC line transmission. For this reason, a new model of the converter bridge which takes into account the major stray capacitances in the converter (the three-pulse model) has been developed, and is described in detail elsewhere. This paper presents comparisons between the classical and three-pulse calculations for the Intermountain Power Project (IPP) HVDC transmission. The calculation results from the three-pulse model agree favorably with the harmonics found in field measurements.

  13. Low noise charge sensitive preamplifier DC stabilized without a physical resistor

    DOE Patents [OSTI]

    Bertuccio, Giuseppe (Brianza, IT); Rehak, Pavel (Patchogue, NY); Xi, Deming (Beijing, CN)

    1994-09-13T23:59:59.000Z

    The invention is a novel charge sensitive preamplifier (CSP) which has no resistor in parallel with the feedback capacitor. No resetting circuit is required to discharge the feedback capacitor. The DC stabilization of the preamplifier is obtained by means of a second feedback loop between the preamplifier output and the common base transistor of the input cascode. The input transistor of the preamplifier is a Junction Field Transistor (JFET) with the gate-source junction forward biased. The detector leakage current flows into this junction. This invention is concerned with a new circuit configuration for a charge sensitive preamplifier and a novel use of the input Field Effect Transistor of the CSP itself. In particular this invention, in addition to eliminating the feedback resistor, eliminates the need for external devices between the detector and the preamplifier, and it eliminates the need for external circuitry to sense the output voltage and reset the CSP. Furthermore, the noise level of the novel CSP is very low, comparable with the performance achieved with other solutions. Experimental tests prove that this configuration for the charge sensitive preamplifier permits an excellent noise performance at temperatures including room temperature. An equivalent noise charge of less than 20 electrons r.m.s. has been measured at room temperature by using a commercial JFET as input device of the preamplifier.

  14. Influence of the transverse dimension on the structure and properties of dc glow discharges

    SciTech Connect (OSTI)

    Bogdanov, E. A. [St. Petersburg State University, St. Petersburg 198904 (Russian Federation); Adams, S. F. [Air Force Research Laboratory, Wright-Patterson AFB, Ohio 45433 (United States); Demidov, V. I. [Department of Physics, West Virginia University, Morgantown, West Virginia 26506 (United States); Kudryavtsev, A. A. [Department of Optics, St. Petersburg State University, St. Petersburg 198904 (Russian Federation); Williamson, J. M. [UES, Inc., 4401 Dayton-Xenia Rd., Beavercreek, Ohio 45432 (United States)

    2010-10-15T23:59:59.000Z

    Two-dimensional (2D) simulations of a dc glow discharge with a cold cathode in argon have been performed for various radii of the discharge tube. It is shown that the loss of the charged particles to the walls can significantly affect plasma parameters as well as properties of the cathode sheath. The longitude dimensions of the negative glow and Faraday dark space depend on the transverse loss of the charge particles and are not consistently predicted with a 1D model. The common assumption that the cathode sheath can be analyzed independently of the plasma also may not be valid. The transverse inhomogeneity of the plasma leads to a change in the current density distribution over the cathode surface. The thickness of the cathode sheath can vary with radial distance from the discharge axis, even for the case of negligible radial loss of the charge particles. The 2D model results provide an analysis of the conditions of applicability of the 1D model.

  15. Computational study of flow dynamics from a dc arc plasma jet

    E-Print Network [OSTI]

    Juan Pablo Trelles

    2013-03-15T23:59:59.000Z

    Plasma jets produced by direct-current (DC) non-transferred arc plasma torches, at the core of technologies ranging from spray coating to pyrolysis, present intricate dynamics due to the coupled interaction of fluid flow, thermal, and electromagnetic phenomena. The flow dynamics from an arc discharge plasma jet are investigated using time-dependent three-dimensional simulations encompassing the dynamics of the arc inside the torch, the evolution of the jet through the discharge environment, and the subsequent impingement of the jet over a flat substrate. The plasma is described by a chemical equilibrium and thermodynamic nonequilibrium (two-temperature) model. The numerical formulation of the physical model is based on a monolithic and fully-coupled treatment of the fluid and electromagnetic equations using a Variational Multiscale Finite Element Method. Simulation results uncover distinct aspects of the flow dynamics, including the jet forcing due to the movement of the electric arc, the prevalence of deviations between heavy-species and electron temperatures in the plasma fringes, the development of shear flow instabilities around the jet, the occurrence of localized regions with high electric fields far from the arc, and the formation and evolution of coherent flow structures.

  16. Deposition and characterization of TiZrV-Pd thin films by dc magnetron sputtering

    E-Print Network [OSTI]

    Wang, Jie; Xu, Yan-Hui; Wei, Wei; Fan, Le; Pei, Xiang-Tao; Hong, Yuan-Zhi; Wang, Yong

    2015-01-01T23:59:59.000Z

    TiZrV film is mainly applied in the ultra-high vacuum pipe of storage ring. Thin film coatings of palladium which was added onto the TiZrV film to increase the service life of nonevaporable getters and enhance pumping speed for H2, was deposited on the inner face of stainless steel pipes by dc magnetron sputtering using argon gas as the sputtering gas. The TiZrV-Pd film properties were investigated by atomic force microscope (AFM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and X-Ray Diffraction (XRD). The grain size of TiZrV and Pd film were about 0.42~1.3 nm and 8.5~18.25 nm respectively. It was found that the roughness of TiZrV films was small, about 2~4 nm, for Pd film it is large, about 17~19 nm. PP At. % of Pd in TiZrV/Pd films varied from 86.84 to 87.56 according to the XPS test results.

  17. Self-consistent modeling of DC and microwave nitrogen discharges and their afterglows

    SciTech Connect (OSTI)

    Guerra, Vasco [Centro de Fisica dos Plasmas, Instituto Superior Tecnico, 1049-001 Lisbon (Portugal)

    2004-12-01T23:59:59.000Z

    This report presents an investigation on the modeling of stationary DC and microwave nitrogen discharges and their afterglows, operating at pressures around one Torr and ionization degrees between 10-7-10-4. The model is based on the self-consistent solutions to the electron Boltzmann equation coupled to the rate balance equations for the most important neutral and charged species, the wave electrodynamics characteristics and the gas thermal balance equation. The results are obtained as a function of the usual discharge operating parameters, namely gas pressure, discharge current or electron density, and tube radius. It is shown that the vibrationally excited molecules play a central role in the whole problem, ensuring a strong link between different kinetics and directly contributing to the mechanisms of dissociation and gas heating. Furthermore, vibrationally excited molecules in high vibration levels are in the origin of the peaks observed in the flowing afterglow for the concentrations of several species, such as N{sub 2}(A {sup 3}{sigma}{sub g}{sup +}), N2(B 3{pi}g), N{sub 2}{sup +}(B {sup 2}{sigma}{sub u}{sup +}) and electrons, which occur downstream from the discharge after a dark zone as a consequence of the V-V up-pumping mechanism.

  18. DC CICC retrofit magnet preliminary design, software development and analysis report. Quarterly progress report, January 1992

    SciTech Connect (OSTI)

    Myatt, R.L.; Marston, P.G.

    1992-02-10T23:59:59.000Z

    The proposed retrofit coil is made of superconducting Cable-in-Conduit Conductor (CICC). The coils are designed to produce a nominal vertical field of 4.5 tesla within the MHD channel based on a nominal current density of 13.05 MA/m{sup 2}. The coils are supported within a case, or so-called constant tension strap. When the magnet is energized, the electromagnetic J {times} B body forces push the winding pack laterally outward and vertically towards the machine`s midplane, thus putting the strap in tension. The end turns add axial tension to the conductor (a condition which is not simulated by this 2-D model of the midlength cross section). A sketch of the magnet system and structure is shown in Fig. 1.0-1. The purpose of this report is to describe the progress made in the design and analysis of the DC CICC retrofit magnet, and to outline the proposed next step.

  19. Solid-state NMR studies for DC 745: April--May 2000

    SciTech Connect (OSTI)

    Stephens, T.; Labouriau, A.

    2000-12-01T23:59:59.000Z

    Powles et al. reported in 1961 that pdydimethyl siloxane melts exhibit a transverse decay of nuclear spin magnetization (T{sub 2}) that is nonexponential. This observation was interpreted in terms of the proton NMR signal from the melt having characteristics of a broad line. Since then, similar findings were obtained for other polymer melts too. Accordingly to Powles et al. this peculiar proton line shape was the result of an intramolecular direct dipole-dipole interaction between a pair of protons. They also suggested that this dipolar interaction was weak because the dipolar interaction was motionally averaged since the orientation-dependent local dipolar field is modulated by molecular dynamics. In sum, the consequences and the origins of nuclear spin correlations in viscous polymer melts were recognized almost 4 decades ago. In the 1970s, Cohen-Addad suggested that these weak proton dipolar interactions could be used to characterize polymer melts and networks. In this work, we have used some of these ideas to probe the effects of thermal treatments on the proton spin-spin relaxation times for DC745.

  20. Low noise charge sensitive preamplifier DC stabilized without a physical resistor

    DOE Patents [OSTI]

    Bertuccio, G.; Rehak, P.; Xi, D.

    1994-09-13T23:59:59.000Z

    The invention is a novel charge sensitive preamplifier (CSP) which has no resistor in parallel with the feedback capacitor. No resetting circuit is required to discharge the feedback capacitor. The DC stabilization of the preamplifier is obtained by means of a second feedback loop between the preamplifier output and the common base transistor of the input cascode. The input transistor of the preamplifier is a Junction Field Transistor (JFET) with the gate-source junction forward biased. The detector leakage current flows into this junction. This invention is concerned with a new circuit configuration for a charge sensitive preamplifier and a novel use of the input Field Effect Transistor of the CSP itself. In particular this invention, in addition to eliminating the feedback resistor, eliminates the need for external devices between the detector and the preamplifier, and it eliminates the need for external circuitry to sense the output voltage and reset the CSP. Furthermore, the noise level of the novel CSP is very low, comparable with the performance achieved with other solutions. Experimental tests prove that this configuration for the charge sensitive preamplifier permits an excellent noise performance at temperatures including room temperature. An equivalent noise charge of less than 20 electrons r.m.s. has been measured at room temperature by using a commercial JFET as input device of the preamplifier. 6 figs.