National Library of Energy BETA

Sample records for bookmark solid-state lighting

  1. Solid State Lighting

    SciTech Connect (OSTI)

    Hastbacka, Mildred; Dieckmann, John; Bouza, Antonio

    2013-03-30

    The article discusses solid state lighting technologies. This topic was covered in two previous ASHRAE Journal columns (2010). This article covers advancements in technologies and the associated efficacies. The life-cycle, energy savings and market potential of these technologies are addressed as well.

  2. Solid-State Lighting Webcasts

    SciTech Connect (OSTI)

    2011-12-16

    Links to past webcast presentations related to solid-state lighting, including presentation slides and question-and-answer sessions, where available.

  3. Solid state lighting component

    DOE Patents [OSTI]

    Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

    2010-10-26

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  4. Solid state lighting component

    DOE Patents [OSTI]

    Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

    2012-07-10

    An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

  5. Solid-State Lighting | Department of Energy

    Energy Savers [EERE]

    Lighting Solid-State Lighting 2013 DOE Solid-State Lighting Program Overview ssl-overviewbrochurefeb2013.pdf (3.05 MB) More Documents & Publications July 2016 Postings January ...

  6. Solid-State Lighting | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Princeton's approach to solid-state lighting. Read more A Comprehensive Program Solid-state lighting (SSL) technology has the potential to reduce U.S. lighting energy usage by...

  7. Solid state electrochromic light modulator

    DOE Patents [OSTI]

    Cogan, Stuart F.; Rauh, R. David

    1993-12-07

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  8. Solid state electrochromic light modulator

    DOE Patents [OSTI]

    Cogan, Stuart F.; Rauh, R. David

    1990-01-01

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  9. Solid state electrochromic light modulator

    DOE Patents [OSTI]

    Cogan, Stuart F.; Rauh, R. David

    1993-01-01

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counterelectrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films.

  10. Solid state electrochromic light modulator

    DOE Patents [OSTI]

    Cogan, S.F.; Rauh, R.D.

    1990-07-03

    An all solid-state variable transmission electrochromic device has a source of charge compensating ions. An inorganic oxide counter electrode film which on reduction with the accompanying insertion of the charge compensating ions increases its transmission of light of predetermined wavelength is separated from a primary electrochromic film which on reduction with the accompanying insertion of the charge compensating ions decreases its transmission of light of predetermined wavelength by an insulating electrolyte film that transports the charge compensating ions. First and second electrodes are contiguous with the inorganic oxide counter electrode film and the primary electrochromic film, respectively, and separated by the three films. 4 figs.

  11. 2016 Project Portfolio: Solid-State Lighting

    Energy Savers [EERE]

    PROJECT PORTFOLIO: SOLID-STATE LIGHTING January 2016 DOE Solid-State Lighting Project Portfolio January 2016 i Executive Summary The U.S. Department of Energy (DOE) partners with ...

  12. Solid-State Lighting Program Strategy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    James R. Brodrick, Ph.D. April 22, 2014 U.S. Department of Energy Solid-State Lighting Program Strategy MARKET * Many companies * Semiconductors :: Lighting * Large business ...

  13. Doing Business with DOE's Solid-State Lighting Program | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Doing Business with DOE's Solid-State Lighting Program Doing Business with DOE's Solid-State Lighting Program 2014 DOE Solid-State Lighting Program Fact Sheet doingbusinessfactshe...

  14. Solid State Lighting FAQ Tip Sheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid State Lighting FAQ Tip Sheet Solid State Lighting FAQ Tip Sheet Contains information on solid state lighting applications for energy efficiency in buildings. PDF icon ...

  15. What's Next for Solid-State Lighting?

    Energy Savers [EERE]

    Photo courtesy of GE Lighting What's Next for Solid-State Lighting? A s we stand on the brink of a lighting revolution spearheaded by light-emitting diode (LED) technology, one ...

  16. Solid-State Lighting Technical Reports

    SciTech Connect (OSTI)

    2011-12-16

    A page that contains links to technical reports of studies estimating the energy savings potential of solid-state lighting in numerous applications.

  17. Solid-State Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emerging Technologies » Solid-State Lighting Solid-State Lighting New CALiPER Snapshot on TLEDs New CALiPER Snapshot on TLEDs Evaluates the current state and trajectory of the market for LED linear lamps. Read more OLED Lighting Products: Capabilities, Challenges, Potential OLED Lighting Products: Capabilities, Challenges, Potential New report and upcoming webinar examine the state of available OLED products and discuss technology and market hurdles. Read more DOE Publishes 2016 SSL R&D

  18. DOE Solid-State Lighting Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    April 16, 2015 U.S. Department of Energy DOE Solid-State Lighting Program 2 DOE Solid-State Lighting Program Mission and Goal By 2025, develop advanced SSL technologies that - compared to conventional lighting technologies - are much more energy efficient, longer lasting, and cost competitive, by targeting a product system efficiency of 50 percent with lighting that accurately reproduces sunlight spectrum. Guided by a government-industry partnership, DOE's mission is to create a new, U.S.-led

  19. Solid-State Lighting-Lighting Facts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting Facts Solid-State Lighting-Lighting Facts Presenter: Marc Ledbetter, Pacific Northwest National Laboratory The LED Lighting Facts program provides credible, verified ...

  20. Standards Development for Solid-State Lighting

    SciTech Connect (OSTI)

    2011-12-16

    To accelerate the development and implementation of needed standards for solid-state lighting products, DOE works closely with a network of standards-setting organizations and offers technical assistance and support

  1. solid state lighting | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solid-State Lighting Solid-State Lighting (SSL) is an emerging technology with the potential to address the urgent challenges of revitalizing America's economy, strengthening our national energy security, and reducing our country's greenhouse gas emissions. SSL will mean greener homes and businesses that use substantially less electricity, making them less dependent on fossil fuels. In the coming decade, SSL will become a key to affordable high-performance buildings - buildings that consume less

  2. Driver circuit for solid state light sources

    DOE Patents [OSTI]

    Palmer, Fred; Denvir, Kerry; Allen, Steven

    2016-02-16

    A driver circuit for a light source including one or more solid state light sources, a luminaire including the same, and a method of so driving the solid state light sources are provided. The driver circuit includes a rectifier circuit that receives an alternating current (AC) input voltage and provides a rectified AC voltage. The driver circuit also includes a switching converter circuit coupled to the light source. The switching converter circuit provides a direct current (DC) output to the light source in response to the rectified AC voltage. The driver circuit also includes a mixing circuit, coupled to the light source, to switch current through at least one solid state light source of the light source in response to each of a plurality of consecutive half-waves of the rectified AC voltage.

  3. Solid-State Lighting Program Overview Brochure | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Solid-State Lighting Program Overview Brochure (1.52 MB) More Documents & Publications Solid-State Lighting Emerging Lighting Technology December 2014 Postings

  4. Solid-State Lighting Manufacturing Workshop | Department of Energy

    Energy Savers [EERE]

    Conferences & Meetings Past Conferences Solid-State Lighting Manufacturing Workshop Solid-State Lighting Manufacturing Workshop Nearly 200 lighting industry leaders, chip ...

  5. Solid-State Lighting Consortia | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-State Lighting Consortia Solid-State Lighting Consortia Presenter: Marc Ledbetter, Pacific Northwest National Laboratory Most potential users of light-emitting diode (LED) ...

  6. DOE Solid-State Lighting Program: Modest Investments, Extraordinary...

    Energy Savers [EERE]

    Modest Investments, Extraordinary Impacts DOE Solid-State Lighting Program Shaping the Future of Solid-State Lighting Today, LED (light-emitting diode) technologies illuminate ...

  7. 2013 Solid-State Lighting Market Introduction Workshop Presentations...

    Broader source: Energy.gov (indexed) [DOE]

    Presentations Pre-Workshop LED Education Solid-State Lighting: The New Basics Jack Curran, ... Cost-Effectiveness of Solid-State Lighting John Delany, Commonwealth Edison Panel ...

  8. Solid-State Lighting Recovery Act Award Selections | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-State Lighting Recovery Act Award Selections Solid-State Lighting Recovery Act Award Selections A chart highlighting core technology research projects and product development ...

  9. Federal Technology Deployment Pilot: Exterior Solid State Lighting...

    Office of Environmental Management (EM)

    Technology Deployment Pilot: Exterior Solid State Lighting Federal Technology Deployment Pilot: Exterior Solid State Lighting Presentation-given at the Fall 2011 Federal Utility ...

  10. Text-Alternative Version: Municipal Solid-State Street Lighting...

    Energy Savers [EERE]

    Text-Alternative Version: Municipal Solid-State Street Lighting Consortium Kickoff Below is the text-alternative version of the Municipal Solid-State Street Lighting Consortium ...

  11. DOE Announces Selections from Solid-State Lighting Core Technologies...

    Broader source: Energy.gov (indexed) [DOE]

    in response to the Solid-State Lighting Core Technologies Funding Opportunity ... fundamental solid-state lighting technology areas for general illumination applications. ...

  12. Solid-State Lighting Subprogram Overview - 2016 BTO Peer Review...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Subprogram Overview - 2016 BTO Peer Review Solid-State Lighting Subprogram Overview - 2016 ... an overview of the Building Technologies Office's Solid-State Lighting subprogram. ...

  13. DOE Announces Selections from Solid-State Lighting Product Development...

    Broader source: Energy.gov (indexed) [DOE]

    in response to the Solid-State Lighting Product Development Funding Opportunity ... By 2025, develop advanced solid-state lighting technologies that, compared to conventional ...

  14. Solid-State Lighting Program Strategy Overview - 2014 BTO Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program Strategy Overview - 2014 BTO Peer Review Solid-State Lighting Program Strategy ... of the Building Technologies Office's Solid-State Lighting Program Strategy activities. ...

  15. Brief History of Solid-State Lighting Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solid-State Lighting Technology - Sandia Energy Energy Search Icon Sandia Home Locations ... Energy Frontier Research Centers: Solid-State Lighting Science Center for Frontiers of ...

  16. DOE Announces Selections for Solid-State Lighting Core Technology...

    Energy Savers [EERE]

    DOE Announces Selections for Solid-State Lighting Core Technology and Product Development ... in response to the Solid-State Lighting (SSL) Core Technology Research and ...

  17. FEMP Outdoor Solid-State Lighting Intiative: Resources for Outdoor...

    Office of Environmental Management (EM)

    Outdoor Solid-State Lighting Intiative: Resources for Outdoor SSL Applications FEMP Outdoor Solid-State Lighting Intiative: Resources for Outdoor SSL Applications Fact sheet ...

  18. 2014 Solid-State Lighting Project Portfolio | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-State Lighting Project Portfolio 2014 Solid-State Lighting Project Portfolio This report contains an overview of SSL projects currently funded by DOE, and those completed. ...

  19. Solid-State Lighting Manufacturing Research and Development ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 (DE-FOA-0000561) Solid-State Lighting Manufacturing Research and Development - Round 3 ... is achieve cost reduction of solid-state lighting for general illumination through ...

  20. DOE Announces Selections for Solid-State Lighting Core Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Announces Selections for Solid-State Lighting Core Technology Research Call (Round 6) ... response to the Solid-State Lighting (SSL) Core Technology Research Call (Round 6) ...

  1. DOE Announces Selections for Solid-State Lighting Core Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Announces Selections for Solid-State Lighting Core Technology and Product Development ... response to the Solid-State Lighting (SSL) Core Technology Research and Product ...

  2. 2014 DOE SOLID-STATE LIGHTING MARKET DEVELOPMENT WORKSHOP | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE SOLID-STATE LIGHTING MARKET DEVELOPMENT WORKSHOP 2014 DOE SOLID-STATE LIGHTING MARKET DEVELOPMENT WORKSHOP PDF icon DOE SSL Market Development Workshop Agenda.pdf More...

  3. DOE Joint Solid-State Lighting Roundtables on Science Challenges...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Joint Solid-State Lighting Roundtables on Science Challenges DOE Joint Solid-State Lighting Roundtables on Science Challenges PDF icon 2014BES-EEREroundtables...

  4. (Lighting and) Solid-State Lighting: Science, Technology, Economic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lighting and) Solid-State Lighting: Science, Technology, Economic Perspectives - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate ...

  5. Nanoengineering for solid-state lighting.

    SciTech Connect (OSTI)

    Schubert, E. Fred; Koleske, Daniel David; Wetzel, Christian; Lee, Stephen Roger; Missert, Nancy A.; Lin, Shawn-Yu; Crawford, Mary Hagerott; Fischer, Arthur Joseph

    2009-09-01

    This report summarizes results from a 3-year Laboratory Directed Research and Development project performed in collaboration with researchers at Rensselaer Polytechnic Institute. Our collaborative effort was supported by Sandia's National Institute for Nanoengineering and focused on the study and application of nanoscience and nanoengineering concepts to improve the efficiency of semiconductor light-emitting diodes for solid-state lighting applications. The project explored LED efficiency advances with two primary thrusts: (1) the study of nanoscale InGaN materials properties, particularly nanoscale crystalline defects, and their impact on internal quantum efficiency, and (2) nanoscale engineering of dielectric and metal materials and integration with LED heterostructures for enhanced light extraction efficiency.

  6. Doing Business with DOE's Solid-State Lighting Program | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Doing Business with DOE's Solid-State Lighting Program Doing Business with DOE's Solid-State Lighting Program Doing Business Factsheet January 2016 (923.71 KB) More Documents & ...

  7. Doing Business with DOE's Solid-State Lighting Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Doing Business with DOE's Solid-State Lighting Program Solid-state lighting (SSL) is an ... Both DOE and the National Science Foundation (NSF) fund Small Business Innovation Research ...

  8. Text-Alternative Version: Solid-State Lighting Early Lessons...

    Energy Savers [EERE]

    Solid-State Lighting Early Lessons Learned Webinar Text-Alternative Version: Solid-State Lighting Early Lessons Learned Webinar Linda Sandahl: Welcome, ladies and gentlemen. I'm ...

  9. Energy Department Provides $7 Million for Solid-State Lighting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Million for Solid-State Lighting Product Development Energy Department Provides 7 Million for Solid-State Lighting Product Development June 6, 2006 - 2:15pm Addthis Funding to ...

  10. Solid-State Lighting Commercial Product Development Resulting...

    Energy Savers [EERE]

    Solid-State Lighting Commercial Product Development Resulting from DOE-Funded Projects The U.S. Department of Energy (DOE) Solid-State Lighting (SSL) Program began funding SSL R&D in ...

  11. Solid-State Lighting Manufacturing Research and Development ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 (DE-FOA-0000792) Solid-State Lighting Manufacturing Research and Development - Round 4 ... to achieve cost reduction of solid-state lighting (SSL) for general illumination through ...

  12. Solid-State Lighting (SSL) Manufacturing Workshops Report

    SciTech Connect (OSTI)

    none,

    2009-10-01

    The final report from the U.S. Department of Energy 2009 Solid-State Lighting Manufacturing Workshops.

  13. Text-Alternative Version: Municipal Solid-State Street Lighting...

    Energy Savers [EERE]

    Street Lighting Consortium Retrofit Financial Analysis Tool Webcast Below is the text-alternative version of the "Municipal Solid-State Street Lighting Consortium ...

  14. 2012 Solid-State Lighting Market Introduction Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting Market Introduction Workshop Presentations and Materials This page provides links to the presentations and materials from the 2012 Solid-State Lighting Market ...

  15. Solid State Lighting LED Core Technology R&D Roundtable

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The document should be referenced as: DOE SSL Program, "Solid State Lighting LED Core Technology R&D Roundtable," November 2015. Authors Monica Hansen LED Lighting Advisors Nnamnor ...

  16. Solid-State Lighting Commercial Product Development Resulting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting Commercial Product Development Resulting from DOE-Funded Projects Solid-State Lighting Commercial Product Development Resulting from DOE-Funded Projects PDF icon ...

  17. Solid-State Lighting News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Results of Public Street and Area Lighting Inventory Survey DOE's Municipal Solid-State Street Lighting Consortium (MSSLC) has released the results of a voluntary web-based...

  18. THE TENTH ANNUAL SOLID-STATE LIGHTING TECHNOLOGY DEVELOPMENT WORKSHOP |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy THE TENTH ANNUAL SOLID-STATE LIGHTING TECHNOLOGY DEVELOPMENT WORKSHOP THE TENTH ANNUAL SOLID-STATE LIGHTING TECHNOLOGY DEVELOPMENT WORKSHOP More than 230 lighting leaders from across North America gathered in Portland, OR, November 17-18, 2015, for the tenth annual Solid-State Lighting Technology Development Workshop, hosted by DOE. The diverse audience spanned the spectrum of SSL stakeholders, representing lighting, control, and components companies as well as research

  19. Outdoor Solid-State Lighting Technology Deployment | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Products & Technologies » Technology Deployment » Outdoor Solid-State Lighting Technology Deployment Outdoor Solid-State Lighting Technology Deployment Solid-state lighting (SSL) technology has the potential to reduce U.S. lighting energy usage by nearly one half and contribute significantly to our nation's climate change solutions. The Federal Energy Management Program (FEMP) outdoor SSL initiative offers a unique opportunity for the federal sector to lead large-scale imple-mentation

  20. Municipal Solid-State Street Lighting Consortium Kickoff Webcast |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Webcasts » Municipal Solid-State Street Lighting Consortium Kickoff Webcast Municipal Solid-State Street Lighting Consortium Kickoff Webcast This May 6, 2010 webcast served as the first official meeting of the new DOE Municipal Solid-State Street Lighting Consortium. Ed Smalley of Seattle City Light and Bruce Kinzey of Pacific Northwest National Laboratory discussed the Consortium's mission and goals, and provided an overview of its first steps, and opportunities to

  1. 2009 Solid-State Lighting Vancouver Manufacturing Workshop Highlights |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 09 Solid-State Lighting Vancouver Manufacturing Workshop Highlights 2009 Solid-State Lighting Vancouver Manufacturing Workshop Highlights Well over 150 lighting industry leaders gathered in Vancouver, Washington, on June 24-25, 2009, for the second DOE Solid-State Lighting (SSL) Manufacturing Workshop. The primary purpose was to review and refine a "strawman" roadmap for SSL manufacturing, based on insights and recommendations from the first workshop, which was

  2. Standards Development for Solid-State Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » Standards Development for Solid-State Lighting Standards Development for Solid-State Lighting To accelerate the development and implementation of needed standards for solid-state lighting products, DOE works closely with a network of standards-setting organizations and offers technical assistance and support. Since 2006, DOE has facilitated ongoing dialogue with key standards development organizations to foster greater coordination

  3. 2012 Solid-State Lighting Market Introduction Workshop Presentations and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials | Department of Energy Market Introduction Workshop Presentations and Materials 2012 Solid-State Lighting Market Introduction Workshop Presentations and Materials This page provides links to the presentations and materials from the 2012 Solid-State Lighting Market Introduction Tutorials and Workshop, held July 17-19 in Pittsburgh, Pennsylvania. Presentations Pre-Workshop Tutorials Solid-State Lighting 101 Jack Curran, LED Transformations CALiPER: How Well Do LED Products Perform in

  4. 2013 Solid-State Lighting Market Introduction Workshop Presentations and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials | Department of Energy Market Introduction Workshop Presentations and Materials 2013 Solid-State Lighting Market Introduction Workshop Presentations and Materials This page provides links to the presentations and materials from the 2013 Solid-State Lighting Market Introduction Workshop and Pre-Workshop LED Education, held November 12-14 in Portland, OR. Presentations Pre-Workshop LED Education Solid-State Lighting: The New Basics Jack Curran, LED Transformations Controls

  5. About the DOE Municipal Solid-State Street Lighting Consortium...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    their unfamiliarity with the various characteristics of LEDs that are relevant to their performance. The Municipal Solid-State Street Lighting Consortium represents a ...

  6. Solid-State Lighting R&D Plan June 2016

    Broader source: Energy.gov (indexed) [DOE]

    Solid-State Lighting Program Building Technologies Office Office of Energy Efficiency and Renewable ... In most regions of the world, even with government policy support, less than ...

  7. System Reliability Model for Solid-State Lighting Luminaires...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    712,234 Project Term: 9162011 - 9302016 Funding Opportunity: Solid State Lighting Core Technology Funding Opportunity Announcement (DE-FOA- 0000329) Project Objective The ...

  8. FEMP Exterior Solid-State Lighting Technology Pilot | Department...

    Office of Environmental Management (EM)

    & Publications Federal Technology Deployment Pilot: Exterior Solid State Lighting Marine Corps Base Quantico (MCBQ) in Virginia Marine Corps Base Quantico Achieves 85% Savings...

  9. Four SBIR Grants Awarded for Solid-State Lighting Technology

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Office of Science has awarded four Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology:

  10. Three SBIR Grants Awarded for Solid-State Lighting Technology

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy Office of Science has awarded Three Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology:

  11. SOLID-STATE CERAMIC LIGHTING PROJECT

    SciTech Connect (OSTI)

    Wayne D. Brown

    2003-06-01

    Meadow River Enterprises, Inc. (MRE) and the New York State College of Ceramics at Alfred University (NYSCC) received a DOE cooperative agreement award in September 1999 to develop an energy-efficient Solid-State Ceramic Lamp (SSCL). The program spanned a nominal two(2) year period ending in February of 2002. The federal contribution to the program totaled $1.6 million supporting approximately 78% of the program costs. The SSCL is a rugged electroluminescent lamp designed for outdoor applications. MRE has filed a provisional patent for this ''second generation'' technology and currently produces and markets blue-green phosphor SSCL devices. White phosphor SSCL devices are also available in prototype quantities. In addition to reducing energy consumption, the ceramic EL lamp offers several economic and societal advantages including lower lifecycle costs and reduced ''light pollution''. Significant further performance improvements are possible but will require a dramatic change in device physical construction related to the use of micro-powder materials and processes. The subject ''second-generation'' program spans a 27 month period and combines the materials and processing expertise of NYSCC, the manufacturing expertise of Meadow River Enterprises, and the phosphor development expertise of OSRAM Sylvania to develop an improved SSCL system. The development plan also includes important contributions by Marshall University (a part of the West Virginia University system). All primary development objectives have been achieved with the exception of improved phosphor powders. The performance characteristics of the first generation SSCL devices were carefully analyzed in year 1 and a second generation lamp was defined and optimized in year 2. The provisional patent was ''perfected'' through a comprehensive patent application filed in November 2002. Lamp efficiency was improved more than 2:1.

  12. Federal Technology Deployment Pilot: Exterior Solid State Lighting

    Broader source: Energy.gov [DOE]

    Presentation—given at the Fall 2011 Federal Utility Partnership Working Group (FUPWG) meeting—provides an overview of the U.S. Department of Energy's Solid-State Lighting Program and an exterior solid-state lighting federal technology deployment pilot project.

  13. Solid-State Lighting Calendar | Department of Energy

    Energy Savers [EERE]

    Solid-State Lighting Calendar Solid-State Lighting Calendar July 2016 < prev next > Sun Mon Tue Wed Thu Fri Sat 26 27 28 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ...

  14. (Lighting and) Solid-State Lighting: Science, Technology, Economic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Perspectives Lighting and) Solid-State Lighting: Science, Technology, Economic Perspectives - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization

  15. Solid-State Lighting Webcasts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Webcasts Solid-State Lighting Webcasts Below you'll find links to information about past webcast presentations related to solid-state lighting, including presentation slides and question-and-answer sessions, where available. OLED Lighting Products-Capabilities, Challenges, Potential July 28, 2016 A presentation on a new DOE market study of OLED lighting products. CONNECTED OUTDOOR LIGHTING SYSTEMS FOR MUNICIPALITIES October 22, 2015 A presentation on the current state of connected outdoor

  16. High Extraction Phosphors for Solid State Lighting

    SciTech Connect (OSTI)

    Chris Summers; Hisham Menkara; Brent Wagner

    2011-09-30

    We have developed high-index, high efficiency bulk luminescent materials and novel nano-sized phosphors for improved solid-state white LED lamps. These advances can potentially contribute to reducing the loss in luminous efficiencies due to scattering, re-absorption, and thermal quenching. The bulk and nanostructured luminescent materials investigated are index matched to GaN and have broad and size-tunable absorption bands, size and impurity tuned emission bands, size-driven elimination of scattering effects, and a separation between absorption and emission bands. These innovations were accomplished through the use of novel synthesis techniques suitable for high volume production for LED lamp applications. The program produced a full-color set of high quantum yield phosphors with high chemical stability. In the bulk phosphor study, the ZnSeS:Cu,Ag phosphor was optimized to achieve >91% efficiency using erbium (Er) and other activators as sensitizers. Detailed analysis of temperature quenching effects on a large number of ZnSeS:Cu,Ag,X and strontium- and calcium-thiogallate phosphors lead to a breakthrough in the understanding of the ??anti-quenching? behavior and a physical bandgap model was developed of this phenomena. In a follow up to this study, optimized phosphor blends for high efficiency and color performance were developed and demonstrated a 2-component phosphor system with good white chromaticity, color temperature, and high color rendering. By extending the protocols of quantum dot synthesis, ??large? nanocrystals, greater than 20 nm in diameter were synthesized and exhibited bulk-like behavior and blue light absorption. The optimization of ZnSe:Mn nanophosphors achieved ~85% QE The limitations of core-shell nanocrystal systems were addressed by investigating alternative deltadoped structures. To address the manufacturability of these systems, a one-pot manufacturing protocol was developed for ZnSe:Mn nanophosphors. To enhance the stability of

  17. About the Solid-State Lighting Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    About the Solid-State Lighting Program About the Solid-State Lighting Program The Energy Policy Act of 2005 (EPACT 2005) and the Energy Independence and Security Act of 2007 (EISA 2007) issued directives to the Secretary of Energy to carry out a Next Generation Lighting Initiative to support SSL R&D. The legislation directs DOE to support research, development, demonstration, and commercial application activities related to advanced SSL technologies. In order to effectively fulfill the

  18. Organic Solid State Lighting | MIT-Harvard Center for Excitonics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solid State Lighting March 15, 2011 at 3pm/36-428 Paul E. Burrows Reata Research burrows.p abstract: Many scientific papers and presentations in the field of organic electronic materials have kicked off with bold statements implying a route to low cost, large area manufacturing. Organic solid state lighting has recently become feasible due to dramatic improvements in the efficiency and operating lifetime of organic light emitting devices (OLEDs) and, again, dramatic visions of efficient, large

  19. Solid-State Lighting 2016 R&D Plan

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Solid-State Lighting (SSL) R&D Plan is a consolidation of the Department of Energy (DOE) SSL Multi-Year Program Plan (MYPP) and the DOE SSL Manufacturing R&D Roadmap that DOE has...

  20. 2015 DOE Solid-State Lighting Project Portfolio

    Broader source: Energy.gov (indexed) [DOE]

    ... used as environmental stressors in building the ALT methods. ... per year of energy and by reducing carbon emissions by ... and air pollutants such as SO2 and DOE Solid-State Lighting ...

  1. Solid-State Lighting Commercial Product Development Resulting from

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE-Funded Projects | Department of Energy Commercial Product Development Resulting from DOE-Funded Projects Solid-State Lighting Commercial Product Development Resulting from DOE-Funded Projects comm-product-factsheet_jun2015.pdf (1.11 MB) More Documents & Publications Lumileds R&D Impacts Summary SSL Selections Descriptions v6.xls Solid-State Lighting Recovery Act Award Selections

  2. Solid-State Lighting Videos | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Videos Solid-State Lighting Videos On this page you can access DOE Solid-State Lighting (SSL) Program videos. LED COLOR-TUNABLE PRODUCTS VIDEOS understanding.jpg Understanding LED Color-Tunable Products View the video describing types of LED color-tunable products along with associated characteristics, advantages, and issues. specifying.jpg Specifying LED Color-Tunable Products View the video overview of the issues surrounding specifying LED color-tunable products. controlling.jpg Controlling

  3. Solid-State Lighting News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-State Lighting News Solid-State Lighting News July 15, 2016 DOE Publishes New CALiPER Snapshot on TLEDs The U.S. Department of Energy's CALiPER program has released a new Snapshot report on linear LED lamps, commonly known as TLEDs. Among the key findings of the new Snapshot, which is based on DOE's LED Lighting Facts® database: July 5, 2016 A New Report and Webinar on OLED Lighting Products DOE has just released a market study on OLED lighting, entitled OLED Lighting Products:

  4. Controls for Solid-State Lighting

    SciTech Connect (OSTI)

    Rubinstein, Francis

    2007-06-22

    This study predicts new hybrid lighting applications for LEDs. In hybrid lighting, LEDs provide a low-energy 'standby' light level while another, more powerful, efficient light source provides light for occupied periods. Lighting controls will allow the two light sources to work together through an appropriate control strategy, typically motion-sensing. There are no technical barriers preventing the use of low through high CRI LEDs for standby lighting in many interior and exterior applications today. The total luminous efficacy of LED systems could be raised by increasing the electrical efficiency of LED drivers to the maximum practically achievable level (94%). This would increase system luminous efficacy by 20-25%. The expected market volumes for many types of LEDs should justify the evolution of new LED drivers that use highly efficient ICs and reduce parts count by means of ASICs. Reducing their electronics parts count by offloading discrete components onto integrated circuits (IC) will allow manufacturers to reduce the cost of LED driver electronics. LED luminaire manufacturers will increasingly integrate the LED driver and thermal management directly in the LED fixture. LED luminaires of the future will likely have no need for separable lamp and ballast because the equipment life of all the LED luminaire components will all be about the same (50,000 hours). The controls and communications techniques used for communicating with conventional light sources, such as dimmable fluorescent lighting, are appropriate for LED illumination for energy management purposes. DALI has been used to control LED systems in new applications and the emerging ZigBee protocol could be used for LEDs as well. Major lighting companies are already moving in this direction. The most significant finding is that there is a significant opportunity to use LEDs today for standby lighting purposes. Conventional lighting systems can be made more efficient still by using LEDs to provide a low

  5. Solid-State Lighting Patents Resulting from DOE-Funded Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SOLID-STATE LIGHTING BUILDING TECHNOLOGIES OFFICE Solid-State Lighting Patents Resulting from DOE-Funded Projects As of January 2015, 96 solid-state lighting (SSL) patents have ...

  6. Energy Department Solid-State Lighting Efforts Spark New Paradigm

    Broader source: Energy.gov [DOE]

    Breakthroughs in solid-state lighting (SSL) technology, driven in part by Energy Department research investments, are leading to sweeping changes in the way lighting experts view the vast economic potential of future lighting systems and their growing benefits to society.

  7. Phosphor-Free Solid State Light Sources

    SciTech Connect (OSTI)

    Jeff E. Nause; Ian Ferguson; Alan Doolittle

    2007-02-28

    The objective of this work was to demonstrate a light emitting diode that emitted white light without the aid of a phosphor. The device was based on the combination of a nitride LED and a fluorescing ZnO substrate. The early portion of the work focused on the growth of ZnO in undoped and doped form. The doped ZnO was successfully engineered to emit light at specific wavelengths by incorporating various dopants into the crystalline lattice. Thereafter, the focus of the work shifted to the epitaxial growth of nitride structures on ZnO. Initially, the epitaxy was accomplished with molecular beam epitaxy (MBE). Later in the program, metallorganic chemical vapor deposition (MOCVD) was successfully used to grow nitrides on ZnO. By combining the characteristics of the doped ZnO substrate with epitaxially grown nitride LED structures, a phosphor-free white light emitting diode was successfully demonstrated and characterized.

  8. Solid State Lighting: GATEWAY and CALiPER | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid State Lighting: GATEWAY and CALiPER Solid State Lighting: GATEWAY and CALiPER Emerging Technologies Project for the 2013 Building Technologies Office's Program Peer Review ...

  9. Solid-State Lighting Technology: Current State of the Art and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Frontier Research Centers: Solid-State Lighting Science Center for Frontiers of ... Twitter Google + Vimeo Newsletter Signup SlideShare Solid-State Lighting Technology: ...

  10. Energy Savings Potential of Solid-State Lighting in General Illuminati...

    Energy Savers [EERE]

    Savings Potential of Solid-State Lighting in General Illumination Applications January 2012 Prepared for: Solid-State Lighting Program Building Technologies Program Office of ...

  11. Energy Savings Forecast of Solid-State Lighting in General Illuminatio...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Energy Savings Potential of Solid-State Lighting in General Illumination Applications - Report LED ADOPTION REPORT Solid-State Lighting R&D Plan

  12. Testimonials - Partnerships in Solid-State Lighting - Soraa, Inc. |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Soraa, Inc. Testimonials - Partnerships in Solid-State Lighting - Soraa, Inc. Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "Mike Krames, Chief Technology Officer, Soraa, Inc." and footage of a man in a lab. Mike Krames: The Department of Energy has done a great job in supporting solid-state lighting in the United States.

  13. Solid-State Lighting Solutions | Department of Energy

    Office of Environmental Management (EM)

    2016 R&D Plan Solid-State Lighting 2016 R&D Plan The Solid-State Lighting (SSL) R&D Plan is a consolidation of the Department of Energy (DOE) SSL Multi-Year Program Plan (MYPP) and the DOE SSL Manufacturing R&D Roadmap that DOE has published and updated in previous years. The SSL R&D Plan provides analysis and direction for ongoing R&D activities to advance SSL technology and increase energy savings. The R&D Plan also reviews SSL technology status and trends for both

  14. Lighting Designer Roundtable on Solid-State Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting Designer Roundtable on Solid-State Lighting Lighting Designer Roundtable on Solid-State Lighting Roundtable meeting in Chicago of a group of lighting designers focused on examining solid-state lighting (SSL) market and technology issues and encouraging a discussion of designers' experiences, ideas, and recommendations regarding SSL & SSL industry. designer_roundtable_report_final_apr08.pdf (1006.7 KB) More Documents & Publications Recessed LED Downlights Next Generation

  15. Roundtable Discussions of the Solid State Lighting R&D Task Priorities Jan. 2011

    SciTech Connect (OSTI)

    none,

    2011-01-01

    A document for the Department of Energy, Energy Efficiency and Renewable Energy, Solid State Lighting

  16. Roundtable Discussions of the Solid State Lighting R&D Task Priorities Nov. 2009

    SciTech Connect (OSTI)

    none,

    2010-01-01

    A document for the Department of Energy, Energy Efficiency and Renewable Energy, Solid State Lighting

  17. Frequently Asked Questions About the Municipal Solid-State Street Lighting Consortium

    Broader source: Energy.gov [DOE]

    This page addresses many of the questions about the Municipal Solid-State Street Lighting Consortium.

  18. Solid-State Lighting Patents Resulting from DOE-Funded Projects |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy 2013 DOE Solid-State Lighting Program Fact Sheet patents_factsheet_feb2013.pdf (797.7 KB) More Documents & Publications Solid-State Lighting Patents Resulting from DOE-Funded Projects Solid-State Lighting Patents Resulting from DOE-Funded Projects 2014 Solid-State Lighting Project Portfolio

  19. Testimonials - Partnerships in Solid-State Lighting - Cree, Inc. |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cree, Inc. Testimonials - Partnerships in Solid-State Lighting - Cree, Inc. Addthis Text Version The words "Office of Energy Efficiency & Renewable Energy, U.S. Department of Energy, EERE Partnership Testimonials," appear on the screen, followed by "John Edmond, Director of Advanced Opto Electronics Technology, Cree, Inc." and footage of a man in a showcase room. John Edmond: We should care as a country about creating jobs, and solid-state

  20. Solid-State Lighting Patents Resulting from DOE-Funded Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Array Interconnect * Ultra-Thin Ohmic Contacts for P-type ... patent applications filed SOLID-STATE LIGHTING: Solid-State ... of Organic Semiconducting Films by Improved Solution ...

  1. Solid-State Lighting Overview - 2015 BTO Peer Review | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-State Lighting Overview - 2015 BTO Peer Review Solid-State Lighting Overview - 2015 BTO Peer Review Presenter: Jim Brodrick, U.S. Department of Energy View the Presentation Solid-State Lighting Overview - 2015 BTO Peer Review (967.78 KB) More Documents & Publications Solid-State Lighting Subprogram Overview - 2016 BTO Peer Review Solid-State Lighting Program Strategy Overview - 2014 BTO Peer Review Materials for R&D Workshop

  2. System Reliability Model for Solid-State Lighting Luminaires | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Presenter: Lynn Davis, RTI International This project is developing and validating a probabilistic reliability prediction tool, and accelerated life testing methodologies, to help lighting manufacturers and stakeholders answer two questions: (1) How can the promised reliability for a rapidly changing technology platform be ensured?, and (2) What will the usage and maintenance profiles be for a product that lasts 15 years? Solid-state lighting (SSL) is described as being highly

  3. FEMP Exterior Solid-State Lighting Technology Pilot | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exterior Solid-State Lighting Technology Pilot FEMP Exterior Solid-State Lighting Technology Pilot Presentation-given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting-covers the Federal Energy Management Program's (FEMP's) exterior solid-state lighting initiative and technology pilot. Download the FEMP Exterior Solid-State Lighting Technology Pilot presentation. (1.44 MB) More Documents & Publications Federal Technology Deployment Pilot: Exterior Solid State

  4. Solid-State Lighting | Center for Energy Efficient Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solid-State Lighting Our goal is to advance the fundamental science and technology to both understand factors that limit efficiencies for light emitting diode-based lighting and to provide innovative and viable solutions to current roadblocks. We intend to achieve these goals by: (1) control and elucidation of the carrier loss mechanisms on nonpolar/semipolar GaN LEDs; (2) growth of defect-free bulk GaN crystals; and (3) full-spectrum lighting using an all semiconductor-based emission region;

  5. Brief History of Solid-State Lighting Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solid-State Lighting Technology - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs

  6. FEMP Exterior Solid-State Lighting Technology Pilot

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FUPWG Fall 2012 FEMP Exterior Solid-State Lighting Technology Pilot Jeff McCullough, LC October 17, 2012 Pacific Northwest National Laboratory Richland, Washington 2 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov * State of SSL Technology - Introducing MOBLI * Federal Energy Management Program (FEMP) - Technology Deployment Matrix - Federal Exterior Market Size - FEMP Exterior SSL Initiative - FEMP-designated Efficiency Requirements - Plans for FY13 * Commercial Building Energy Alliance

  7. System Reliability Model for Solid-State Lighting Luminaires | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Lead Performer: RTI International - Research Triangle Park, NC Partner: Auburn University - Auburn, AL DOE Total Funding: $2,848,942 Cost Share: $712,234 Project Term: September 16, 2011 - September 30, 2016 Funding Opportunity: Solid State Lighting Core Technology Funding Opportunity Announcement (DE-FOA- 0000329) Project Objective The primary objectives of the proposed work will be to develop and validate a reliability model and accelerated life testing (ALT) methodologies for

  8. Rotary-Cooled Solid-State Lighting - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Building Energy Efficiency Building Energy Efficiency Find More Like This Return to Search Rotary-Cooled Solid-State Lighting Sandia National Laboratories Contact SNL About This Technology Publications: PDF Document Publication Market Sheet (1,819 KB) <em>A 100 W RCSSL luminaire used for high-bay lighting. The rotating heat-sink-impeller provides low thermal resistance in a small overall luminaire size.</em><br type="_moz" /> A 100 W RCSSL luminaire used for high-bay

  9. Apply: Solid-State Lighting Advanced Technology R&D - 2015 Funding...

    Office of Environmental Management (EM)

    Solid-State Lighting Advanced Technology R&D - 2015 Funding Opportunity Apply: Solid-State Lighting Advanced Technology R&D - 2015 Funding Opportunity October 14, 2014 - 3:57pm ...

  10. Apply: Solid-State Lighting Advanced Technology R&D - 2014(DE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apply: Solid-State Lighting Advanced Technology R&D - 2014 (DE-FOA-0000973) Apply: Solid-State Lighting Advanced Technology R&D - 2014 (DE-FOA-0000973) December 6, 2013 - 4:27pm ...

  11. Solid-State Lighting Patents Resulting from DOE-Funded Projects...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-State Lighting Patents Resulting from DOE-Funded Projects Patents Factsheet January 2016 (798.8 KB) More Documents & Publications Solid-State Lighting Patents Resulting from ...

  12. Solid-State Lighting Patents Resulting from DOE-Funded Projects...

    Broader source: Energy.gov (indexed) [DOE]

    2013 DOE Solid-State Lighting Program Fact Sheet patentsfactsheetfeb2013.pdf (797.7 KB) More Documents & Publications Solid-State Lighting Patents Resulting from DOE-Funded ...

  13. Funding Opportunity for Solid-State Lighting Advanced Technology R&D – 2014

    Broader source: Energy.gov [DOE]

    On December 6, 2013, DOE announced solid-state lighting funding opportunity DE-FOA-0000973, "Solid-State Lighting Advanced Technology R&D - 2014." A total of up to $10 million in funding is...

  14. "Solid-state Lighting: 'The case' 10 Years After and FutureProspects...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solid-state Lighting: 'The case' 10 Years After and Future Prospects" paper will be ... Twitter Google + Vimeo GovDelivery SlideShare "Solid-state Lighting: 'The case' 10 Years ...

  15. Report Summary: Hammer Testing Findings for Solid-State Lighting Luminaires

    SciTech Connect (OSTI)

    2014-01-01

    Brief summary of DOE LED Systems Reliability Consortium's Hammer Testing Findings for Solid-State Lighting Luminaires report.

  16. Solid-State Lighting Commercial Product Development Resulting from DOE-Funded Projects

    SciTech Connect (OSTI)

    2015-06-30

    Nnapshot of commercialized products directly developed or enabled by DOE Solid-State Lighting Program R&D funding.

  17. Energy Savings Potential of Solid-State Lighting in General Illumination Applications 2010 to 2030

    SciTech Connect (OSTI)

    none,

    2010-02-01

    A report on the energy savings potential of solid-state lighting in general illumination applications from 2010 to 2030.

  18. Solid-State Lighting Patents Resulting from DOE-Funded Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Light Extraction Blocks for Thin Form Factor OLED Lighting ... Nitrides for Solid State Lighting Applications ... of Organic Semiconducting Films by Improved Solution ...

  19. Transformations in Lighting: The Eighth Annual Solid-State Lighting R&D

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop | Department of Energy Eighth Annual Solid-State Lighting R&D Workshop Transformations in Lighting: The Eighth Annual Solid-State Lighting R&D Workshop Photo of a large group of people sitting at tables, facing a screen and speakers at the front of the room. More than 350 researchers, manufacturers, and other industry insiders and observers gathered in San Diego February 1-3, 2011, to participate in DOE's "Transformations in Lighting" Solid-State Lighting (SSL)

  20. Transformations in Lighting: The Seventh Annual Solid-State Lighting R&D

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop | Department of Energy Seventh Annual Solid-State Lighting R&D Workshop Transformations in Lighting: The Seventh Annual Solid-State Lighting R&D Workshop Photo of a group of people assembled in a meeting room, listening to a speaker. More than 350 researchers, manufacturers, and other industry insiders and observers gathered in Raleigh, N.C., February 2-4, 2010, to participate in the "Transformations in Lighting" Solid-State Lighting R&D Workshop, hosted by

  1. Solid-State Lighting Patents Resulting from DOE-Funded Projects |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy 2014 DOE Solid-State Lighting Program Fact Sheet patents_factsheet_jan2014.pdf (809.47 KB) More Documents & Publications Solid-State Lighting Patents Resulting from DOE-Funded Projects Solid-State Lighting Patents Resulting from DOE-Funded Projects 2015 Project Portfolio

  2. Clean Energy Manufacturing Initiative Solid-State Lighting

    SciTech Connect (OSTI)

    Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

    2014-09-23

    The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

  3. Clean Energy Manufacturing Initiative Solid-State Lighting Video

    SciTech Connect (OSTI)

    Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

    2014-09-23

    The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

  4. Clean Energy Manufacturing Initiative Solid-State Lighting

    ScienceCinema (OSTI)

    Thomas, Sunil; Edmond, John; Krames, Michael; Raman, Sudhakar

    2014-12-03

    The importance of U.S. manufacturing for clean energy technologies, such as solid-state lighting (SSL), is paramount to increasing competitiveness in a global marketplace. SSLs are poised to drive the lighting market, worldwide. In order to continue that competitiveness and support further innovation, the time to invest in U.S. manufacturing of clean energy technologies is now. Across the country, companies developing innovative clean energy technologies find competitive advantages to manufacturing in the U.S. The Department of Energy's Building Technology Office SSL Manufacturing Roadmap is just one example of how we support manufacturing through convening industry perspectives on opportunities to significantly reduce risk, improve quality, increase yields, and lower costs.

  5. Transformations in Lighting: The Sixth Annual Solid-State Lighting R&D

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop | Department of Energy Sixth Annual Solid-State Lighting R&D Workshop Transformations in Lighting: The Sixth Annual Solid-State Lighting R&D Workshop Photo of large audience seated in a conference room. More than 400 SSL technology leaders from industry, research organizations, universities, national laboratories, manufacturing, energy efficiency organizations, utilities and municipalities gathered in San Francisco, CA to participate in the "Transformations in

  6. 2014 Solid-State Lighting Manufacturing R&D Workshop Presentations...

    Energy Savers [EERE]

    Lighting Manufacturing R&D Workshop Presentations and Materials This page provides links to the presentations and materials from the 2014 Solid-State Lighting ...

  7. 2012 Solid-State Lighting Manufacturing R&D Workshop Presentations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting Manufacturing R&D Workshop Presentations and Materials This page provides links to the presentations and materials from the 2012 Solid-State Lighting ...

  8. High Efficiency LED Lamp for Solid-State Lighting

    SciTech Connect (OSTI)

    James Ibbetson

    2006-12-31

    This report contains a summary of technical achievements during a three-year project to demonstrate high efficiency, solid-state lamps based on gallium nitride/silicon carbide light-emitting diodes. Novel chip designs and fabrication processes are described for a new type of nitride light-emitting diode with the potential for very high efficiency. This work resulted in the demonstration of blue light-emitting diodes in the one watt class that achieved up to 495 mW of light output at 350 mA drive current, corresponding to quantum and wall plug efficiencies of 51% and 45%, respectively. When combined with a phosphor in Cree's 7090 XLamp package, these advanced blue-emitting devices resulted in white light-emitting diodes whose efficacy exceeded 85 lumens per watt. In addition, up to 1040 lumens at greater than 85 lumens per watt was achieved by combining multiple devices to make a compact white lamp module with high optical efficiency.

  9. The Eighth Annual DOE Solid-State Lighting Market Introduction Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Eighth Annual DOE Solid-State Lighting Market Introduction Workshop The Eighth Annual DOE Solid-State Lighting Market Introduction Workshop More than 200 lighting leaders from across North America gathered in Portland, OR, November 12-14, 2013, for the eighth annual Solid-State Lighting (SSL) Market Introduction Workshop, hosted by DOE. The diverse audience spanned the spectrum: industry, government, efficiency organizations, utilities, municipalities, designers,

  10. The Ninth Annual DOE Solid-State Lighting Market Development Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Information Resources » Conferences & Meetings » Past Conferences » The Ninth Annual DOE Solid-State Lighting Market Development Workshop The Ninth Annual DOE Solid-State Lighting Market Development Workshop Nearly 200 lighting leaders from across North America gathered in Detroit from November 12-13, 2014, for the ninth annual Solid-State Lighting (SSL) Market Development Workshop, hosted by DOE. The diverse audience spanned the spectrum of SSL stakeholders,

  11. The Seventh Annual DOE Solid-State Lighting Market Introduction Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Seventh Annual DOE Solid-State Lighting Market Introduction Workshop The Seventh Annual DOE Solid-State Lighting Market Introduction Workshop Photo of a room of people seated in long rows of conference tables. Nearly 200 lighting leaders from across North America gathered in Pittsburgh July 17-19, 2012, for the seventh annual Solid-State Lighting (SSL) Market Introduction Workshop, hosted by DOE. The diverse audience spanned the spectrum: industry, government, efficiency

  12. Secretary of Energy Announces $5 Million for Solid State Lighting Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy $5 Million for Solid State Lighting Research Secretary of Energy Announces $5 Million for Solid State Lighting Research October 5, 2006 - 9:08am Addthis ALBUQUERQUE, NM - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today announced the selection of seven projects, valued at nearly $5 million, for Solid State Lighting (SSL) research in nanotechnology. SSL has the potential to more than double the efficiency of general lighting systems, reducing overall

  13. DOE Municipal Solid-State Street Lighting Consortium | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research & Development » Technology Application R&D » DOE Municipal Solid-State Street Lighting Consortium DOE Municipal Solid-State Street Lighting Consortium The DOE Municipal Solid-State Street Lighting Consortium shares technical information and experiences related to LED street and area lighting demonstrations and serves as an objective resource for evaluating new products on the market intended for those applications. Cities, power providers, and others who invest in street and

  14. Industry Leaders, Research Experts Gather for 2006 DOE Solid-State Lighting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop | Department of Energy 2006 DOE Solid-State Lighting Workshop Industry Leaders, Research Experts Gather for 2006 DOE Solid-State Lighting Workshop Solid-state lighting (SSL) technology leaders from industry, research institutions, universities, and national laboratories gathered in Orlando, Florida from February 1-3, 2006 to attend a workshop focused on advancing SSL technologies from the laboratory to the marketplace. The workshop was hosted by the U.S. Department of Energy (DOE)

  15. Energy Savings Potential of Solid-State Lighting in General Illumination Applications- Factsheet

    Broader source: Energy.gov [DOE]

    A U.S. DOE SSL fact sheet on Energy Savings Potential of Solid-State Lighting in General Illumination Applications.

  16. Roundtable Discussions of the Solid-State Lighting R&D Task Structure

    SciTech Connect (OSTI)

    none,

    2009-01-01

    A report of a roundtable discussion addressing the R&D task structure for the DOE Solid-State Lighting Program.

  17. Apply: Solid-State Lighting Advanced Technology R&D - 2015 Funding

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Opportunity | Department of Energy Solid-State Lighting Advanced Technology R&D - 2015 Funding Opportunity Apply: Solid-State Lighting Advanced Technology R&D - 2015 Funding Opportunity October 14, 2014 - 3:57pm Addthis This funding opportunity is closed. The U.S. Department of Energy (DOE) announced a solid-state lighting (SSL) R&D funding opportunity on October 14, 2014. Under this funding opportunity (DE-FOA-0001171, "Solid-State Lighting Advanced Technology R&D -

  18. Energy Savings Potential of Solid-State Lighting in General Illuminati...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon sslenergy-savings-reportjan-2012.pdf More Documents & Publications Energy Savings Forecast of Solid-State Lighting in General Illumination Applications ISSUANCE ...

  19. Text-Alternative Version: Municipal Solid-State Street Lighting Consortium Kickoff

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text-alternative version of the Municipal Solid-State Street Lighting Consortium Kickoff webcast, held May 6, 2010.

  20. Text-Alternative Version: Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool Webcast

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text-alternative version of the "Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool" webcast, held April 3, 2012.

  1. 2013 Solid-State Lighting Manufacturing R&D Workshop Presentations and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials | Department of Energy 3 Solid-State Lighting Manufacturing R&D Workshop Presentations and Materials 2013 Solid-State Lighting Manufacturing R&D Workshop Presentations and Materials This page provides links to the presentations and materials from the 2013 Solid-State Lighting Manufacturing R&D Workshop, held June 5-6 in Boston. Presentations Day 1 Welcome James Brodrick, Solid-State Lighting Program Manager, U.S. Department of Energy Introduction David Danielson,

  2. Transformations in Lighting: The Fifth Annual Solid-State Lighting R&D

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop | Department of Energy Fifth Annual Solid-State Lighting R&D Workshop Transformations in Lighting: The Fifth Annual Solid-State Lighting R&D Workshop Photo of a man and a woman, standing, smiling at the camera. The woman, on the left, is wearing a colorful blue and gray outfit. The man, on the right, is wearing a suit. More than 300 SSL technology leaders from industry, research organizations, universities, and national laboratories gathered in Atlanta, GA, along with

  3. Energy Department Provides $7 Million for Solid-State Lighting Product

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development | Department of Energy 7 Million for Solid-State Lighting Product Development Energy Department Provides $7 Million for Solid-State Lighting Product Development June 6, 2006 - 2:15pm Addthis Funding to total $10 million with industry contribution WASHINGTON, DC - U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today announced that DOE will provide a total of $7 million for five cost-shared projects for solid-state lighting (SSL) product development. Solid-state

  4. The Department of Energy's Solid-State Lighting Program, OAS-RA-L-13-03

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid- State Lighting Program OAS-RA-L-13-03 February 2013 Department of Energy Washington, DC 20585 February 28, 2013 MEMORANDUM FOR THE DIRECTOR, NATIONAL ENERGY TECHNOLOGY LABORATORY FROM: Jack Rouch, Director Central Audits Division Office of Inspector General SUBJECT: INFORMATION: Audit Report on "The Department of Energy's Solid-State Lighting Program" BACKGROUND The Department of Energy's (Department) Office of Energy Efficiency and Renewable Energy established the Solid-State

  5. Solid-State Lighting 2015 R&D Plan | Department of Energy

    Energy Savers [EERE]

    2015 R&D Plan Solid-State Lighting 2015 R&D Plan The Solid-State Lighting (SSL) R&D Plan is a consolidation of the Department of Energy (DOE) SSL Multi-Year Program Plan (MYPP) and ...

  6. Apply: Solid-State Lighting Advanced Technology R&D - 2014

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DE-FOA-0000973) | Department of Energy Apply: Solid-State Lighting Advanced Technology R&D - 2014 (DE-FOA-0000973) Apply: Solid-State Lighting Advanced Technology R&D - 2014 (DE-FOA-0000973) December 6, 2013 - 4:27pm Addthis This funding opportunity is closed. Through research and development of solid-state lighting (SSL),including both light-emitting diode (LED) and organic light emitting diode (OLED) technologies, the objectives of this opportunity are to: Maximize the

  7. 2013 Solid-State Lighting Manufacturing R&D Workshop Presentations...

    Broader source: Energy.gov (indexed) [DOE]

    Day 1 Welcome James Brodrick, Solid-State Lighting Program Manager, U.S. Department of ... Utility Lighting Programs and Product Performance Testing Mary Matteson Bryan, P.E. Cost ...

  8. Solid-State Lighting: Early Lessons Learned on the Way to Market...

    Broader source: Energy.gov (indexed) [DOE]

    a new DOE report, Solid-State Lighting: Early Lessons Learned on the Way to Market. The SSL market continues to evolve rapidly and LED lighting products are now available for ...

  9. FEMP Outdoor Solid-State Lighting Intiative: Resources for Outdoor SSL Applications

    Broader source: Energy.gov [DOE]

    Fact sheet describes the Federal Energy Management Program's (FEMP) solid-state lighting (SSL) initiatives that provide information and resources for the application of SSL lighting in exterior spaces.

  10. 2012 Solid-State Lighting R&D Workshop Presentations and Materials |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 2 Solid-State Lighting R&D Workshop Presentations and Materials 2012 Solid-State Lighting R&D Workshop Presentations and Materials Workshop Report 2012 DOE SSL R&D Workshop Report Presentations Day 1 Welcome and Introduction James Brodrick, U.S. Department of Energy A Lighting Transformation Josh Baribeau, Canaccord Genuity Fueling Technology Advancements and Innovations Fred Maxik, Lighting Science Group Panel 1: Insights from Installations Bruce Kinzey,

  11. The Eleventh Annual Solid-State Lighting R&D Workshop | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Eleventh Annual Solid-State Lighting R&D Workshop The Eleventh Annual Solid-State Lighting R&D Workshop Photo of a hotel ballroom with people seated at long tables. Two hundred researchers, manufacturers, and other industry insiders and observers gathered in Tampa, FL, January 28-30, 2014, to participate in DOE's 11th annual Solid-State Lighting (SSL) R&D Workshop. DOE SSL Program Manager James Brodrick kicked off Day 1 by reminding attendees that it takes time to achieve

  12. The Tenth Annual Solid-State Lighting R&D Workshop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conferences & Meetings » Past Conferences » The Tenth Annual Solid-State Lighting R&D Workshop The Tenth Annual Solid-State Lighting R&D Workshop Photo of a conference room with people seated side by side at rows of tables. Nearly 250 researchers, manufacturers, and other industry insiders and observers gathered in Long Beach, CA, January 29-31, 2013, to participate in DOE's tenth annual Solid-State Lighting (SSL) R&D Workshop. DOE SSL Program Manager James Brodrick kicked off

  13. Four SBIR Grants Awarded for Solid-State Lighting Technology | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Four SBIR Grants Awarded for Solid-State Lighting Technology Four SBIR Grants Awarded for Solid-State Lighting Technology May 14, 2014 - 11:25am Addthis The U.S. Department of Energy Office of Science has awarded four Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology: VoltServer, Inc. - Low-Cost, High Efficiency Integration of SSL and Building Controls using a PET Power Distribution System Innotec, Corp. - Integrating

  14. The Thirteenth Annual Solid-State Lighting R&d Workshop | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy The Thirteenth Annual Solid-State Lighting R&d Workshop The Thirteenth Annual Solid-State Lighting R&d Workshop raleigh-highlights1.jpg Meeting Presentations and Materials More than 250 researchers, manufacturers, industry insiders, and observers gathered in Raleigh, North Carolina, February 2-4, 2016, to participate in DOE's 13th annual Solid-State Lighting R&D Workshop. DOE SSL Program Manager James Brodrick reminded the audience that these are still relatively early

  15. THE TWELFTH ANNUAL SOLID-STATE LIGHTING R&D WORKSHOP | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    THE TWELFTH ANNUAL SOLID-STATE LIGHTING R&D WORKSHOP THE TWELFTH ANNUAL SOLID-STATE LIGHTING R&D WORKSHOP Nearly 300 researchers, manufacturers, and other industry insiders and observers gathered in San Francisco January 27-29, 2015, to participate in DOE's 12th annual Solid-State Lighting (SSL) R&D Workshop. 1-carr.jpg Mike Carr, Senior Advisor and Principal Deputy Assistant Secretary of DOE's Office of Energy Efficiency and Renewable Energy, gave the keynote address. Noting that

  16. The Fifth Annual DOE Solid-State Lighting Market Introduction Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Market Introduction Workshop The Fifth Annual DOE Solid-State Lighting Market Introduction Workshop More than 300 lighting leaders from across the continent gathered in Philadelphia July 20-22, 2010, for the fifth annual Solid-State Lighting (SSL) Market Introduction Workshop, hosted by DOE. The audience was diverse, spanning the spectrum from industry, to government, to efficiency organizations, to utilities, to municipalities, to designers and specifiers, to retailers

  17. The Fourth Annual DOE Solid-State Lighting Manufacturing R&D Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Information Resources » Conferences & Meetings » Past Conferences » The Fourth Annual DOE Solid-State Lighting Manufacturing R&D Workshop The Fourth Annual DOE Solid-State Lighting Manufacturing R&D Workshop Photo of a room of people seated at conference tables. Two hundred lighting industry leaders from across the country, representing every link in the supply chain-from chip makers, to luminaire manufacturers, to material and equipment suppliers, to

  18. The Sixth Annual DOE Solid-State Lighting Market Introduction Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Market Introduction Workshop The Sixth Annual DOE Solid-State Lighting Market Introduction Workshop Photo of a room full of people seated at tables, at a conference. More than 275 lighting leaders from across North America gathered in Seattle July 12-14, 2011, for the sixth annual Solid-State Lighting (SSL) Market Introduction Workshop, hosted by DOE. The diverse audience spanned the spectrum from industry, to government, to efficiency organizations, to utilities, to

  19. DOE Awards Two Small Business Innovation Research Phase II Grants for Solid-State Lighting Technology

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) has awarded two Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology. The SBIR program seeks to increase...

  20. Solid-State Lighting Subprogram Overview — 2016 BTO Peer Review

    Broader source: Energy.gov [DOE]

    This presentation at the 2016 Peer Review provided an overview of the Building Technologies Office’s Solid-State Lighting subprogram. Through robust feedback, the BTO Program Peer Review enhances existing efforts and improves future designs.

  1. DOE Awards Seven Small Business Innovation Research Grants for Solid-State Lighting Technology

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) has awarded seven Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology. The SBIR program seeks to...

  2. Solid-State Lighting Manufacturing Research and Development – Round 4 (DE-FOA-0000792)

    Broader source: Energy.gov [DOE]

    Closed Total DOE Funding: $11 million The objective of this Funding Opportunity Announcement (FOA) is to achieve cost reduction of solid-state lighting (SSL) for general illumination through improvements in manufacturing equipment, processes, or techniques.

  3. Solid-State Lighting Manufacturing Research and Development – Round 3 (DE-FOA-0000561)

    Broader source: Energy.gov [DOE]

    Closed Total DOE Funding: $10 million The objective of this Funding Opportunity Announcement (FOA) is achieve cost reduction of solid-state lighting for general illumination through improvements in manufacturing equipment, processes, or techniques.

  4. DOE Awards Five Small Business Innovation Research Grants for Solid-State Lighting Technology

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) has awarded five Small Business Innovation Research (SBIR) grants targeting advances in solid-state lighting (SSL) technology. The SBIR program seeks to increase...

  5. Solid-State Lighting Program Overview — 2016 BTO Peer Review

    Broader source: Energy.gov [DOE]

    This presentation at the 2016 Peer Review provided an overview of the Building Technologies Office’s Solid-State Lighting Program. Through robust feedback, the BTO Program Peer Review enhances existing efforts and improves future designs.

  6. DOE Announces Selections for Solid-State Lighting Core Technology Research Call (Round 6)

    Broader source: Energy.gov [DOE]

    The National Energy Technology Laboratory (NETL), on behalf of the U.S. Department of Energy (DOE), is pleased to announce four selections in response to the Solid-State Lighting (SSL) Core...

  7. MidAmerican Energy (Electric)- Municipal Solid-State Lighting Grant Program

    Broader source: Energy.gov [DOE]

    MidAmerican Energy offers grants to munipalities which implement solid-state roadway street lighting upgrades. Grants of up to $5,000 are available to participating entities who install eligible...

  8. Webcast: Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool

    Broader source: Energy.gov [DOE]

    This April 3, 2012 webcast presented information about the Retrofit Financial Analysis Tool developed by DOE"s Municipal Solid-State Street Lighting Consortium. Doug Elliott of Pacific Northwest...

  9. Text-Alternative Version: Solid-State Lighting Early Lessons Learned Webinar

    Broader source: Energy.gov [DOE]

    Linda Sandahl: Welcome, ladies and gentlemen. I'm Linda Sandahl with the Pacific Northwest National Laboratory, and I'd like to welcome you to today's webcast, Solid-State Lighting: Early Lessons...

  10. High-efficiency solid-state lighting and superconductor research receives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    funding High-efficiency solid-state lighting and superconductor High-efficiency solid-state lighting and superconductor research receives funding Each project will be funded for up to three years. August 28, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National

  11. Networked Lighting Power and Control Platform for Solid State Lighting in Commercial Office Applications

    SciTech Connect (OSTI)

    Covaro, Mark

    2012-08-15

    Redwood Systems' objective is to further accelerate the acceptance of solid state lighting (SSL) with fine grain and easy-to-use control. In addition, increased and improved sensor capability allows the building owner or user to gather data on the environment within the building. All of this at a cost equal to or less than that of code-compliant fluorescent lighting. The grant we requested and received has been used to further enhance the system with power conversion efficiency improvements and additional features. Some of these features, such as building management system (BMS) control, allow additional energy savings in non-lighting building systems.

  12. DOE Joint Solid State Lighting Roundtables on Science Challenges

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. Department of Energy Prepared By: LED Lighting Advisors Navigant Consulting, Inc. ......... 2 2. LED Critical R&D Challenges ...

  13. Solid-State Lighting R&D Workshop

    Broader source: Energy.gov [DOE]

    Join DOE—and lighting industry experts representing the entire SSL supply chain—at the sixth annual SSL Manufacturing R&D Workshop.

  14. Solid-State Lighting R&D Plan

    Broader source: Energy.gov (indexed) [DOE]

    ... a dramatic reduction of the use of rare-earth metals for lighting in line with the DOE ... system comprising these various elements is optimized for a particular application. ...

  15. Testimonials - Partnerships in Solid-State Lighting - Cree, Inc...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Opto Electronics Technology, Cree, Inc." and footage of a man in a showcase room. ... Footage of a man in lab opening a consule full of lights in a lab, followed by a variety ...

  16. Webcast: Municipal Solid-State Street Lighting Consortium Retrofit...

    Broader source: Energy.gov (indexed) [DOE]

    Laboratory provided a guided walk-through of what the tool can do and how to use it to evaluate costs and benefits associated with converting to LED street and roadway lighting. ...

  17. The Third Annual DOE Solid-State Lighting Manufacturing R&D Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Conferences & Meetings » Past Conferences » The Third Annual DOE Solid-State Lighting Manufacturing R&D Workshop The Third Annual DOE Solid-State Lighting Manufacturing R&D Workshop Photo of a group of people sitting in a meeting room. More than 250 lighting industry leaders from across the country, representing every link in the supply chain-from chip makers, to luminaire manufacturers, to material and equipment suppliers, to packagers, to luminaire

  18. 2014 Solid-State Lighting R&D Workshop Presentations and Materials |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy R&D Workshop Presentations and Materials 2014 Solid-State Lighting R&D Workshop Presentations and Materials This page provides links to the presentations and materials from the 2014 Solid-State Lighting R&D Workshop, held January 28-30 in Tampa, Florida. Presentations Day 1 Welcome and Introduction James Brodrick, U.S. Department of Energy The Next Frontier in SSL: Creating New Value with Intelligent, Effective Lighting Brian Chemel, Digital Lumens The

  19. DOE Solid-State Lighting in Higher Ed Facilities

    SciTech Connect (OSTI)

    Miller, Naomi J.; Curry, Ku'Uipo J.

    2010-07-20

    The focus of the workshop was on higher education facilities because college and university campuses are an important market for lighting products and they use almost every kind of luminaire on the market. This workshop was seen as a chance for SSL manufacturers large and small to get the inside scoop from a group of people that specify, pay for, install, use, maintain, and dispose of lighting systems for nearly every type of application. Workshop attendees explored the barriers to SSL adoption, the applications where SSL products could work better than existing technologies, and where SSL luminaires are currently falling short. This report summarizes the Workshop activities and presentation highlights.

  20. An Integrated Solid-State LED Luminaire for General Lighting

    SciTech Connect (OSTI)

    Kevin Dowling; Fritz Morgan Ihor Lys; Mike Datta; Bernd Keller; Thomas Yuan

    2009-03-31

    A strong systems approach to designing and building practical LED-based replacement lamps is lacking. The general method of taking high-performance LEDs and marrying them to standard printed circuit boards, drivers and a heat sink has fallen short of the promise of LED lighting. In this program, a top-down assessment of requirements and a bottom-up reinvention of LED sources, electronics, optics and mechanics have resulted in the highest performance lamp possible. The team, comprised of Color Kinetics, the leaders in LED lighting and Cree, the leaders in LED devices took an approach to reinvent the package, the driver and the overall form and aesthetic of a replacement source. The challenge was to create a new benchmark in LED lighting - the resultant lamp, a PAR38 equivalent, met the light output, color, color quality and efficacy marks set out in the program as well as being dimmable, which is important for market acceptance. The approach combined the use of multiple source die, a chip-on-board approach, a very efficient driver topology, the use of both direct emission and phosphor conversion, and a unique faceted optic to avoid the losses, artifacts and hotspots of lensed approaches. The integral heat sink provided a mechanical base and airflow using a chimney-effect for use in a wide variety of locations and orientations. These research results led to a much better understanding of the system effects of component level technologies. It was clear that best-of-breed sub-system results do not necessarily result in the best end result for the complete system. In doing this work, we did not neglect the practical aspects of these systems. These were not rarified results and commercially impractical but lent themselves to eventual commercial products in the marketplace. The end result - a high performance replacement lamp - will save significant energy while providing a high-quality light source.

  1. DOE Announces Funding Opportunity for Solid-State Lighting R&D | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 14, 2014 - 12:00pm Addthis The U.S. Department of Energy (DOE) announced a solid-state lighting (SSL) R&D funding opportunity on October 14, 2014. Under this funding opportunity (DE-FOA-0001171, "Solid-State Lighting Advanced Technology R&D - 2015"), a total of up to $10 million in funding is directed toward all three existing DOE SSL R&D program areas: Core Technology Research-the application of fundamental scientific concepts to SSL technology Product

  2. DOE Announces Funding Opportunity for Solid-State Lighting R&D | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy 29, 2015 - 3:43pm Addthis The U.S. Department of Energy (DOE) announced a solid-state lighting (SSL) R&D funding opportunity on October 29, 2015. Under this funding opportunity (DE-FOA-0001364, "Solid-State Lighting Advanced Technology R&D-2016"), a total of up to $10.5 million in funding is directed toward all three existing DOE SSL R&D program areas: Core Technology Research-the application of fundamental scientific concepts to SSL technology Product

  3. 2012 Solid-State Lighting Manufacturing R&D Workshop Presentations and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials | Department of Energy Manufacturing R&D Workshop Presentations and Materials 2012 Solid-State Lighting Manufacturing R&D Workshop Presentations and Materials This page provides links to the presentations and materials from the 2012 Solid-State Lighting Manufacturing R&D Workshop, held June 13-14 in San Jose, California. Workshop Report 2012 DOE SSL Manufacturing R&D Workshop Report Presentations Day 1 Welcome and Introduction James Brodrick, U.S. Department of

  4. 2013 Solid-State Lighting R&D Workshop Presentations and Materials |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy R&D Workshop Presentations and Materials 2013 Solid-State Lighting R&D Workshop Presentations and Materials This page provides links to the presentations and materials from the 2013 Solid-State Lighting R&D Workshop, held January 29-31 in Long Beach, California. Presentations Day 1 Welcome and Introduction James Brodrick, U.S. Department of Energy City of Los Angeles: Changing Our Glow for Efficiency Ed Ebrahimian, City of Los Angeles National Research

  5. 2014 Solid-State Lighting Manufacturing R&D Workshop Presentations and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials | Department of Energy Manufacturing R&D Workshop Presentations and Materials 2014 Solid-State Lighting Manufacturing R&D Workshop Presentations and Materials This page provides links to the presentations and materials from the 2014 Solid-State Lighting Manufacturing R&D Workshop, held May 7-8 in San Diego, California. Presentations Day 1 Welcome and Introduction James Brodrick, U.S. Department of Energy Smart Streetlights: A Key Building Block for a Smart City Lorie

  6. The potential of ill-nitride laser diodes for solid-state lighting [Advantages of III-Nitride Laser Diodes in Solid-State Lighting

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wierer, Jonathan; Tsao, Jeffrey Y.

    2014-09-01

    III-nitride laser diodes (LDs) are an interesting light source for solid-state lighting (SSL). Modelling of LDs is performed to reveal the potential advantages over traditionally used light-emitting diodes (LEDs). The first, and most notable, advantage is LDs have higher efficiency at higher currents when compared to LEDs. This is because Auger recombination that causes efficiency droop can no longer grow after laser threshold. Second, the same phosphor-converted methods used with LEDs can also be used with LDs to produce white light with similar color rendering and color temperature. Third, producing white light from direct emitters is equally challenging for bothmore » LEDs and LDs, with neither source having a direct advantage. Lastly, the LD emission is directional and can be more readily captured and focused, leading to the possibility of novel and more compact luminaires. These advantages make LDs a compelling source for future SSL.« less

  7. FEMP Outdoor Solid State Lighting Intiative: Resources for Outdoor SSL Applications

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-State Street Lighting Consortium Fact Sheet - The Consortium shares technical information and experi- ences related to LED street and area light- ing demonstrations. The Consortium also serves as an objective resource for evalu- ating new products on the market intended for street and area lighting applications. http://apps1.eere.energy.gov/buildings/ publications/pdfs/ssl/consortium_fs.pdf DOE SSL GATEWAY Demonstration Project Results - DOE GATEWAY dem- onstrations showcase

  8. Solid-State Lighting Program Strategy Overview- 2014 BTO Peer Review

    Broader source: Energy.gov [DOE]

    Presenter: James Broderick, U.S. Department of Energy This presentation at the 2014 Peer Review provided an overview of the Building Technologies Office's Solid-State Lighting Program Strategy activities. Through robust feedback, the BTO Program Peer Review enhances existing efforts and improves future designs.

  9. Solid-State Lighting. Early Lessons Learned on the Way to Market

    SciTech Connect (OSTI)

    Sandahl, L. J.; Cort, K. A.; Gordon, K. L.

    2014-01-01

    Analysis of issues and lessons learned during the early stages of solid-state lighting market introduction in the U.S., which also summarizes early actions taken to avoid potential problems anticipated based on lessons learned from the market introduction of compact fluorescent lamps.

  10. NANOSTRUCTURED HIGH PERFORMANCE ULTRAVIOLET AND BLUE LIGHT EMITTING DIODES FOR SOLID STATE LIGHTING

    SciTech Connect (OSTI)

    Arto V. Nurmikko; Jung Han

    2004-10-01

    We report on research results in this project which synergize advanced material science approaches with fundamental optical physics concepts pertaining to light-matter interaction, with the goal of solving seminal problems for the development of very high performance light emitting diodes (LEDs) in the blue and near ultraviolet for Solid State Lighting applications. Accomplishments in the first 12 month contract period include (1) new means of synthesizing zero- and one-dimensional GaN nanostructures, (2) establishment of the building blocks for making GaN-based microcavity devices, and (3) demonstration of top-down approach to nano-scale photonic devices for enhanced spontaneous emission and light extraction. These include a demonstration of eight-fold enhancement of the external emission efficiency in new InGaN QW photonic crystal structures. The body of results is presented in this report shows how a solid foundation has been laid, with several noticeable accomplishments, for innovative research, consistent with the stated milestones.

  11. Red-Emitting Phosphors for Solid-State Lighting - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Technologies Industrial Technologies Electricity Transmission Electricity Transmission Advanced Materials Advanced Materials Find More Like This Return to Search Red-Emitting Phosphors for Solid-State Lighting Sandia National Laboratories Contact SNL About This Technology Publications: PDF Document Publication Market Sheet (851 KB) Technology Marketing SummarySandia has developed red-emitting phosphors that will help to transform the cold blue of many current light-emitting diodes

  12. Solid-State Lighting Patents Resulting from DOE-Funded Projects

    Broader source: Energy.gov (indexed) [DOE]

    Nearly 200 lighting industry leaders, chip makers, fixture and component manufacturers, and others gathered in Fairfax, Virginia, on April 21 and 22, 2009, for the first-ever DOE Solid-State Lighting (SSL) Manufacturing Workshop, to explore issues related to materials, equipment, process control, and other factors that influence SSL product quality and cost. The underlying purpose of the workshop was to promote excellence in manufacturing and accelerate market introduction of SSL for maximum

  13. Nanostructured High Performance Ultraviolet and Blue Light Emitting Diodes for Solid State Lighting

    SciTech Connect (OSTI)

    Arto V. Nurmikko; Jung Han

    2005-09-30

    We report on research results in this project which synergize advanced material science approaches with fundamental optical physics concepts pertaining to light-matter interaction, with the goal of solving seminal problems for the development of very high performance light emitting diodes (LEDs) in the blue and near ultraviolet for Solid State Lighting applications. Accomplishments in the second 12 month contract period include (i) new means of synthesizing AlGaN and InN quantum dots by droplet heteroepitaxy, (ii) synthesis of AlGaInN nanowires as building blocks for GaN-based microcavity devices, (iii) progress towards direct epitaxial alignment of the dense arrays of nanowires, (iv) observation and measurements of stimulated emission in dense InGaN nanopost arrays, (v) design and fabrication of InGaN photonic crystal emitters, and (vi) observation and measurements of enhanced fluorescence from coupled quantum dot and plasmonic nanostructures. The body of results is presented in this report shows how a solid foundation has been laid, with several noticeable accomplishments, for innovative research, consistent with the stated milestones.

  14. Industry Leaders, Research Experts Gather for Second Annual DOE Solid-State Lighting Workshop

    Broader source: Energy.gov [DOE]

    Technology leaders from industry, research institutions, universities, and national laboratories gathered in San Diego, California, on February 3 and 4, 2005 to attend a workshop focused on advancing solid-state lighting (SSL) technology from the laboratory to the marketplace. Sponsored by the U.S. Department of Energy (DOE) Building Technologies Office, the workshop provided an interactive forum for shaping and prioritizing DOE's SSL research and development activities.

  15. Energy Savings Forecast of Solid-State Lighting in General Illumination Applications

    SciTech Connect (OSTI)

    none,

    2014-08-29

    With declining production costs and increasing technical capabilities, LED adoption has recently gained momentum in general illumination applications. This is a positive development for our energy infrastructure, as LEDs use significantly less electricity per lumen produced than many traditional lighting technologies. The U.S. Department of Energy’s Energy Savings Forecast of Solid-State Lighting in General Illumination Applications examines the expected market penetration and resulting energy savings of light-emitting diode, or LED, lamps and luminaires from today through 2030.

  16. DOE Announces Selections for Solid-State Lighting Core Technology and Product Development Funding Opportunities (Round 3)

    Broader source: Energy.gov [DOE]

    The National Energy Technology Laboratory (NETL), on behalf of the U.S. Department of Energy (DOE), is pleased to announce eight selections in response to the Solid-State Lighting (SSL) Core...

  17. DOE Announces Selections for Solid-State Lighting Core Technology and Product Development Funding Opportunities (Round 4)

    Broader source: Energy.gov [DOE]

    The National Energy Technology Laboratory (NETL), on behalf of the U.S. Department of Energy (DOE), is pleased to announce 13 selections in response to the Solid-State Lighting (SSL) Core...

  18. The Fifth Annual DOE Solid-State Lighting Manufacturing R&D Workshop |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Manufacturing R&D Workshop The Fifth Annual DOE Solid-State Lighting Manufacturing R&D Workshop Photo of a conference room with people seated side by side at rows of tables. More than 150 industry leaders from across the country, representing every link in the supply chain-chip makers, luminaire manufacturers, material and equipment suppliers, packagers, luminaire testers, and makers of testing equipment-gathered in Boston June 5-6, 2013, to share insights,

  19. Solid-State Lighting: Early Lessons Learned on the Way to Market

    SciTech Connect (OSTI)

    Sandahl, Linda J.; Cort, Katherine A.; Gordon, Kelly L.

    2013-12-31

    The purpose of this report is to document early challenges and lessons learned in the solid-state lighting (SSL) market development as part of the DOE’s SSL Program efforts to continually evaluate market progress in this area. This report summarizes early actions taken by DOE and others to avoid potential problems anticipated based on lessons learned from the market introduction of compact fluorescent lamps and identifies issues, challenges, and new lessons that have been learned in the early stages of the SSL market introduction. This study identifies and characterizes12 key lessons that have been distilled from DOE SSL program results.

  20. Solid-State Lighting Commercial Product Development Resulting from DOE-Funded Projects

    Broader source: Energy.gov (indexed) [DOE]

    The Solid-State Lighting (SSL) R&D Plan is a consolidation of the Department of Energy (DOE) SSL Multi-Year Program Plan (MYPP) and the DOE SSL Manufacturing R&D Roadmap that DOE has published and updated in previous years. The SSL R&D Plan provides analysis and direction for ongoing R&D activities to advance SSL technology and increase energy savings. The Roadmap also reviews SSL technology status and trends for both LEDs and OLEDs and offers an overview of the current DOE SSL

  1. Multi-Faceted Scientific Strategies Toward Better Solid-State Lighting of Phosphorescent OLEDs

    SciTech Connect (OSTI)

    Mohammad Omary; Bruce Gnade; Qi Wang; Oussama Elbjeirami; Chi Yang; Nigel Shepherd; Huiping Jia; Manuel Quevedo; Husam Alshareef; Minghang Li; Ming-Te Lin; Wei-Hsuan Chen; Iain Oswald; Pankaj Sinha; Ravi Arvapally; Usha Kaipa; John Determan; Sreekar Marpu; Roy McDougald; Gustavo Garza; Jason Halbert; Unnat Bhansali; Michael Perez

    2010-08-31

    This project has advanced solid-state lighting (SSL) by utilizing new phosphorescent systems for use in organic light-emitting diodes (OLEDs). The technical approach was two-fold: a) Targeted synthesis and screening of emitters designed to exhibit phosphorescence with maximized brightness in the solid state; and b) Construction and optimizing the performance of monochromatic and white OLEDs from the best new emitters to improve performance metrics versus the state of the art. The phosphorescent systems were screened candidates among a large variety of recentlysynthesized and newly-designed molecular and macromolecular metal-organic phosphors. The emitters and devices have been optimized to maximize light emission and color metrics, improve the long-term durability of emitters and devices, and reduce the manufacturing cost both by simplifying the process flow and by seeking less expensive device components than common ones. The project succeeded in all these goals upon comparison of the best materials and devices investigated vs. the state of the art of the technology.

  2. Analysis of lasers as a solution to efficiency droop in solid-state lighting

    SciTech Connect (OSTI)

    Chow, Weng W.; Crawford, Mary H.

    2015-10-06

    This letter analyzes the proposal to mitigate the efficiency droop in solid-state light emitters by replacing InGaN light-emitting diodes (LEDs) with lasers. The argument in favor of this approach is that carrier-population clamping after the onset of lasing limits carrier loss to that at threshold, while stimulated emission continues to grow with injection current. A fully quantized (carriers and light) theory that is applicable to LEDs and lasers (above and below threshold) is used to obtain a quantitative evaluation. The results confirm the potential advantage of higher laser output power and efficiency above lasing threshold, while also indicating disadvantages including low efficiency prior to lasing onset, sensitivity of lasing threshold to temperature, and the effects of catastrophic laser failure. As a result, a solution to some of these concerns is suggested that takes advantage of recent developments in nanolasers.

  3. Analysis of lasers as a solution to efficiency droop in solid-state lighting

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chow, Weng W.; Crawford, Mary H.

    2015-10-06

    This letter analyzes the proposal to mitigate the efficiency droop in solid-state light emitters by replacing InGaN light-emitting diodes (LEDs) with lasers. The argument in favor of this approach is that carrier-population clamping after the onset of lasing limits carrier loss to that at threshold, while stimulated emission continues to grow with injection current. A fully quantized (carriers and light) theory that is applicable to LEDs and lasers (above and below threshold) is used to obtain a quantitative evaluation. The results confirm the potential advantage of higher laser output power and efficiency above lasing threshold, while also indicating disadvantages includingmore » low efficiency prior to lasing onset, sensitivity of lasing threshold to temperature, and the effects of catastrophic laser failure. As a result, a solution to some of these concerns is suggested that takes advantage of recent developments in nanolasers.« less

  4. Science and the Energy Security Challenge: The Example of Solid-State Lighting

    ScienceCinema (OSTI)

    Philips, Julia [Sandia

    2010-01-08

    Securing a viable, carbon neutral energy future for humankind will require an effort of gargantuan proportions. As outlined clearly in a series of workshops sponsored by the DOE Office of Basic Energy Sciences (http://www.sc.doe.gov/bes/reports/list.html), fundamental advances in scientific understanding are needed to broadly implement many of the technologies that are held out as promising options to meet future energy needs, ranging from solar energy, to nuclear energy, to approaches to clean combustion. Using solid state lighting based on inorganic materials as an example, I will discuss some recent results and new directions, emphasizing the multidisciplinary, team nature of the endeavor. I will also offer some thoughts about how to encourage translation of the science into attractive, widely available products ? a significant challenge that cannot be ignored. This case study offers insight into approaches that are likely to be beneficial for addressing other aspects of the energy security challenge.

  5. Development of Advanced LED Phosphors by Spray-based Processes for Solid State Lighting

    SciTech Connect (OSTI)

    Cabot Corporation

    2007-09-30

    The overarching goal of the project was to develop luminescent materials using aerosol processes for making improved LED devices for solid state lighting. In essence this means improving white light emitting phosphor based LEDs by improvement of the phosphor and phosphor layer. The structure of these types of light sources, displayed in Figure 1, comprises of a blue or UV LED under a phosphor layer that converts the blue or UV light to a broad visible (white) light. Traditionally, this is done with a blue emitting diode combined with a blue absorbing, broadly yellow emitting phosphor such as Y{sub 3}Al{sub 5}O{sub 12}:Ce (YAG). A similar result may be achieved by combining a UV emitting diode and at least three different UV absorbing phosphors: red, green, and blue emitting. These emitted colors mix to make white light. The efficiency of these LEDs is based on the combined efficiency of the LED, phosphor, and the interaction between the two. The Cabot SSL project attempted to improve the over all efficiency of the LED light source be improving the efficiency of the phosphor and the interaction between the LED light and the phosphor. Cabot's spray based process for producing phosphor powders is able to improve the brightness of the powder itself by increasing the activator (the species that emits the light) concentration without adverse quenching effects compared to conventional synthesis. This will allow less phosphor powder to be used, and will decrease the cost of the light source; thus lowering the barrier of entry to the lighting market. Cabot's process also allows for chemical flexibility of the phosphor particles, which may result in tunable emission spectra and so light sources with improved color rendering. Another benefit of Cabot's process is the resulting spherical morphology of the particles. Less light scattering results when spherical particles are used in the phosphor layer (Figure 1) compared to when conventional, irregular shaped phosphor particles

  6. Reliability and Failure Modes of Solid-State Lighting Electrical Drivers Subjected to Accelerated Aging

    SciTech Connect (OSTI)

    Lall, Pradeep; Sakalaukus, Peter; Davis, Lynn

    2015-02-19

    An investigation of an off-the-shelf solid-state lighting device with the primary focus on the accompanied light-emitting diode (LED) electrical driver (ED) has been conducted. A set of 10 EDs were exposed to temperature humidity life testing of 85% RH and 85 C (85/85) without an electrical bias per the JEDEC standard JESD22-A101C in order to accelerate the ingress of moisture into the aluminum electrolytic capacitor (AEC) and the EDs in order to assess the reliability of the LED drivers for harsh environment applications. The capacitance and equivalent series resistance for each AEC inside the ED were measured using a handheld LCR meter as possible leading indications of failure. The photometric quantities of a single pristine light engine were monitored in order to investigate the interaction between the light engine and the EDs. These parameters were used in assessing the overall reliability of the EDs. In addition, a comparative analysis has been conducted between the 85/85 accelerated test data and a previously published high-temperature storage life accelerated test of 135°C. The results of the 85/85 acceleration test and the comparative analysis are presented in this paper.

  7. Multi-Year Program Plan FY'09-FY'15 Solid-State Lighting Research and Development

    SciTech Connect (OSTI)

    2009-03-01

    President Obama's energy and environment agenda calls for deployment of 'the Cheapest, Cleanest, Fastest Energy Source - Energy Efficiency.' The Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy (EERE) plays a critical role in advancing the President's agenda by helping the United States advance toward an energy-efficient future. Lighting in the United States is projected to consume nearly 10 quads of primary energy by 2012.3 A nation-wide move toward solid-state lighting (SSL) for general illumination could save a total of 32.5 quads of primary energy between 2012 and 2027. No other lighting technology offers the DOE and our nation so much potential to save energy and enhance the quality of our built environment. The DOE has set forth the following mission statement for the SSL R&D Portfolio: Guided by a Government-industry partnership, the mission is to create a new, U.S.-led market for high-efficiency, general illumination products through the advancement of semiconductor technologies, to save energy, reduce costs and enhance the quality of the lighted environment.

  8. Reliability and Failure Modes of Solid-State Lighting Electrical Drivers Subjected to Accelerated Aging

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lall, Pradeep; Sakalaukus, Peter; Davis, Lynn

    2015-02-19

    An investigation of an off-the-shelf solid-state lighting device with the primary focus on the accompanied light-emitting diode (LED) electrical driver (ED) has been conducted. A set of 10 EDs were exposed to temperature humidity life testing of 85% RH and 85 C (85/85) without an electrical bias per the JEDEC standard JESD22-A101C in order to accelerate the ingress of moisture into the aluminum electrolytic capacitor (AEC) and the EDs in order to assess the reliability of the LED drivers for harsh environment applications. The capacitance and equivalent series resistance for each AEC inside the ED were measured using a handheldmore » LCR meter as possible leading indications of failure. The photometric quantities of a single pristine light engine were monitored in order to investigate the interaction between the light engine and the EDs. These parameters were used in assessing the overall reliability of the EDs. In addition, a comparative analysis has been conducted between the 85/85 accelerated test data and a previously published high-temperature storage life accelerated test of 135°C. The results of the 85/85 acceleration test and the comparative analysis are presented in this paper.« less

  9. MOCVD synthesis of group III-nitride heterostructure nanowires for solid-state lighting.

    SciTech Connect (OSTI)

    Wang, George T.; Creighton, James Randall; Talin, Albert Alec

    2006-11-01

    Solid-state lighting (SSL) technologies, based on semiconductor light emitting devices, have the potential to reduce worldwide electricity consumption by more than 10%, which could significantly reduce U.S. dependence on imported energy and improve energy security. The III-nitride (AlGaInN) materials system forms the foundation for white SSL and could cover a wide spectral range from the deep UV to the infrared. For this LDRD program, we have investigated the synthesis of single-crystalline III-nitride nanowires and heterostructure nanowires, which may possess unique optoelectronic properties. These novel structures could ultimately lead to the development of novel and highly efficient SSL nanodevice applications. GaN and III-nitride core-shell heterostructure nanowires were successfully synthesized by metal organic chemical vapor deposition (MOCVD) on two-inch wafer substrates. The effect of process conditions on nanowire growth was investigated, and characterization of the structural, optical, and electrical properties of the nanowires was also performed.

  10. The Municipal Solid-State Street Lighting Consortium Public Outdoor Lighting Inventory: Phase I: Survey Results

    SciTech Connect (OSTI)

    Kinzey, Bruce R.; Smalley, Edward; Haefer, R.

    2014-09-30

    This document presents the results of a voluntary web-based inventory survey of public street and area lighting across the U.S. undertaken during the latter half of 2013.This survey attempts to access information about the national inventory in a “bottoms-up” manner, going directly to owners and operators. Adding to previous “top down” estimates, it is intended to improve understanding of the role of public outdoor lighting in national energy use.

  11. DOE Announces Selections from Solid-State Lighting Product Development Funding Opportunity Announcement

    Broader source: Energy.gov [DOE]

    The National Energy Technology Laboratory (NETL), on behalf of the U.S. Department of Energy (DOE), is pleased to announce the selection of five (5) applications in response to the Solid-State...

  12. DOE Announces Selections from Solid-State Lighting Core Technologies Funding Opportunity Announcement and Laboratory Call

    Broader source: Energy.gov [DOE]

    The National Energy Technology Laboratory (NETL), on behalf of the U.S. Department of Energy (DOE) is pleased to announce the selection of sixteen (16) applications in response to the Solid-State...

  13. Failure Mode Classification for Life Prediction Modeling of Solid-State Lighting

    SciTech Connect (OSTI)

    Sakalaukus, Peter Joseph

    2015-08-01

    Since the passing of the Energy Independence and Security Act of 2007, the U.S. government has mandated greater energy independence which has acted as a catalyst for accelerating and facilitating research efforts toward the development and deployment of market-driven solutions for energy-saving homes, buildings and manufacturing, as well as sustainable transportation and renewable electricity generation. As part of this effort, an emphasis toward advancing solid-state lighting technology through research, development, demonstration, and commercial applications is assisting in the phase out of the common incandescent light bulb, as well as developing a more economical lighting source that is less toxic than compact fluorescent lighting. This has led lighting manufacturers to pursue SSL technologies for a wide range of consumer lighting applications. An SSL luminaire’s lifetime can be characterized in terms of lumen maintenance life. Lumen maintenance or lumen depreciation is the percentage decrease in the relative luminous flux from that of the original, pristine luminous flux value. Lumen maintenance life is the estimated operating time, in hours, when the desired failure threshold is projected to be reached at normal operating conditions. One accepted failure threshold of SSL luminaires is lumen maintenance of 70% -- a 30% reduction in the light output of the luminaire. Currently, the only approved lighting standard that puts forth a recommendation for long-term luminous flux maintenance projections towards a specified failure threshold of an SSL luminaire is the IES TM-28-14 (TM28) standard. iii TM28 was derived as a means to compare luminaires that have been tested at different facilities, research labs or companies. TM28 recommends the use of the Arrhenius equation to determine SSL device specific reaction rates from thermally driven failure mechanisms used to characterize a single failure mode – the relative change in the luminous flux output or “light

  14. Basic Research Needs for Solid-State Lighting. Report of the Basic Energy Sciences Workshop on Solid-State Lighting, May 22-24, 2006

    SciTech Connect (OSTI)

    Phillips, J. M.; Burrows, P. E.; Davis, R. F.; Simmons, J. A.; Malliaras, G. G.; So, F.; Misewich, J.A.; Nurmikko, A. V.; Smith, D. L.; Tsao, J. Y.; Kung, H.; Crawford, M. H.; Coltrin, M. E.; Fitzsimmons, T. J.; Kini, A.; Ashton, C.; Herndon, B.; Kitts, S.; Shapard, L.; Brittenham, P. W.; Vittitow, M. P.

    2006-05-24

    The workshop participants enthusiastically concluded that the time is ripe for new fundamental science to beget a revolution in lighting technology. SSL sources based on organic and inorganic materials have reached a level of efficiency where it is possible to envision their use for general illumination. The research areas articulated in this report are targeted to enable disruptive advances in SSL performance and realization of this dream. Broad penetration of SSL technology into the mass lighting market, accompanied by vast savings in energy usage, requires nothing less. These new ?good ideas? will be represented not by light bulbs, but by an entirely new lighting technology for the 21st century and a bright, energy-efficient future indeed.

  15. III-nitride quantum dots for ultra-efficient solid-state lighting: III-nitride quantum dots for ultra-efficient solid-state lighting

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wierer, Jonathan J.; Tansu, Nelson; Fischer, Arthur J.; Tsao, Jeffrey Y.

    2016-05-23

    III-nitride light-emitting diodes (LEDs) and laser diodes (LDs) are ultimately limited in performance due to parasitic Auger recombination. For LEDs, the consequences are poor efficiencies at high current densities; for LDs, the consequences are high thresholds and limited efficiencies. Here, we present arguments for III-nitride quantum dots (QDs) as active regions for both LEDs and LDs, to circumvent Auger recombination and achieve efficiencies at higher current densities that are not possible with quantum wells. QD-based LDs achieve gain and thresholds at lower carrier densities before Auger recombination becomes appreciable. QD-based LEDs achieve higher efficiencies at higher currents because of highermore » spontaneous emission rates and reduced Auger recombination. The technical challenge is to control the size distribution and volume of the QDs to realize these benefits. If constructed properly, III-nitride light-emitting devices with QD active regions have the potential to outperform quantum well light-emitting devices, and enable an era of ultra-efficient solidstate lighting.« less

  16. High efficiency light source using solid-state emitter and down-conversion material

    DOE Patents [OSTI]

    Narendran, Nadarajah; Gu, Yimin; Freyssinier, Jean Paul

    2010-10-26

    A light emitting apparatus includes a source of light for emitting light; a down conversion material receiving the emitted light, and converting the emitted light into transmitted light and backward transmitted light; and an optic device configured to receive the backward transmitted light and transfer the backward transmitted light outside of the optic device. The source of light is a semiconductor light emitting diode, a laser diode (LD), or a resonant cavity light emitting diode (RCLED). The down conversion material includes one of phosphor or other material for absorbing light in one spectral region and emitting light in another spectral region. The optic device, or lens, includes light transmissive material.

  17. International trends in solid-state lighting : analyses of the article and patent literature.

    SciTech Connect (OSTI)

    Tsao, Jeffrey Yeenien; Huey, Mark C.; Boyack, Kevin W.; Miksovic, Ann E.

    2008-07-01

    We present an analysis of the literature of solid-state lighting, based on a comprehensive dataset of 35,851 English-language articles and 12,420 U.S. patents published or issued during the years 1977-2004 in the foundational knowledge domain of electroluminescent materials and phenomena. The dataset was created using a complex, iteratively developed search string. The records in the dataset were then partitioned according to: whether they are articles or patents, their publication or issue date, their national or continental origin, whether the active electroluminescent material was inorganic or organic, and which of a number of emergent knowledge sub-domains they aggregate into on the basis of bibliographic coupling. From these partitionings, we performed a number of analyses, including: identification of knowledge sub-domains of historical and recent importance, and trends over time of the contributions of various nations and continents to the knowledge domain and its sub-domains. Among the key results: (1) The knowledge domain as a whole has been growing quickly: the average growth rates of the inorganic and organic knowledge sub-domains have been 8%/yr and 25%/yr, respectively, compared to average growth rates less than 5%/yr for English-language articles and U.S. patents in other knowledge domains. The growth rate of the organic knowledge sub-domain is so high that its historical dominance by the inorganic knowledge sub-domain will, at current trajectories, be reversed in the coming decade. (2) Amongst nations, the U.S. is the largest contributor to the overall knowledge domain, but Japan is on a trajectory to become the largest contributor within the coming half-decade. Amongst continents, Asia became the largest contributor during the past half-decade, overwhelmingly so for the organic knowledge sub-domain. (3) The relative contributions to the article and patent datasets differ for the major continents: North America contributing relatively more patents

  18. DOE Announces Selection of National Laboratory Center for Solid-State Lighting R&D and Seven Projects for Core Technology Research in Nanotechnology

    Office of Energy Efficiency and Renewable Energy (EERE)

    The National Energy Technology Laboratory (NETL), on behalf of the U.S. Department of Energy (DOE), is pleased to announce the selection of the National Laboratory Center for Solid-State Lighting...

  19. Solid-State Lighting-L Prize Competition | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting-L Prize Competition Presenter: Marc Ledbetter, Pacific Northwest National Laboratory The L Prize competition spurs the development of new, ultra-efficient lighting ...

  20. Development of White-Light Emitting Active Layers in Nitride Based Heterostructures for Phosphorless Solid State Lighting

    SciTech Connect (OSTI)

    Jan Talbot; Kailash Mishra

    2007-12-31

    This report provides a summary of research activities carried out at the University of California, San Diego and Central Research of OSRAM SYLVANIA in Beverly, MA partially supported by a research contract from US Department of Energy, DE-FC26-04NT422274. The main objective of this project was to develop III-V nitrides activated by rare earth ions, RE{sup 3+}, which could eliminate the need for phosphors in nitride-based solid state light sources. The main idea was to convert electron-hole pairs injected into the active layer in a LED die to white light directly through transitions within the energy levels of the 4f{sup n}-manifold of RE{sup 3+}. We focused on the following materials: Eu{sup 3+}(red), Tb{sup 3+}(green), Er{sup 3+}(green), Dy{sup 3+}(yellow) and Tm{sup 3+}(blue) in AlN, GaN and alloys of AlN and GaN. Our strategy was to explore candidate materials in powder form first, and then study their behavior in thin films. Thin films of these materials were to be deposited on sapphire substrates using pulsed laser deposition (PLD) and metal organic vapor phase epitaxy (MOVPE). The photo- and cathode-luminescence measurements of these materials were used to investigate their suitability for white light generation. The project proceeded along this route with minor modifications needed to produce better materials and to expedite our progress towards the final goal. The project made the following accomplishments: (1) red emission from Eu{sup 3+}, green from Tb{sup 3+}, yellow from Dy{sup 3+} and blue from Tm{sup 3+} in AlN powders; (2) red emission from Eu{sup 3+} and green emission from Tb{sup 3+} in GaN powder; (3) red emission from Eu{sup 3+} in alloys of GaN and AlN; (4) green emission from Tb{sup 3+} in GaN thin films by PLD; (5) red emission from Eu{sup 3+} and Tb{sup 3+} in GaN thin films deposited by MOVPE; (6) energy transfer from host to RE{sup 3+}; (7) energy transfer from Tb{sup 3+} to Eu{sup 3+} in AlN powders; (8) emission from AlN powder samples

  1. Energy Savings Forecast of Solid-State Lighting in General Illumination Applications

    Broader source: Energy.gov [DOE]

    Report forecasting the U.S. energy savings of LED white-light sources compared to conventional white-light sources (i.e., incandescent, halogen, fluorescent, and high-intensity discharge) over the...

  2. DOE Releases Latest Report on Energy Savings Forecast of Solid-State Lighting

    Broader source: Energy.gov [DOE]

    DOE has published a new report forecasting the energy savings of LED white-light sources compared with conventional white-light sources. The sixth iteration of the Energy Savings Forecast of Solid...

  3. Energy Department Announces Outdoor Winners of Next Generation Luminaires™ Solid-State Lighting Design Competition

    Broader source: Energy.gov [DOE]

    The 2013 Next Generation LuminairesTM (NGL) Design Competition outdoor lighting category winners were announced Wednesday night at the Strategies in Light conference in Santa Clara, California. The...

  4. The June 11, 2015, issue of DOE's Solid-State Lighting Postings...

    Energy Savers [EERE]

    16, 2015 The Prospects for Creating Efficient Color-Mixed White LEDs The efficacy of LED lighting products has already surpassed that of traditional technologies for most...

  5. Exploring Flicker in Solid State Lighting: What you Might Find, and How to Deal With It

    SciTech Connect (OSTI)

    Poplawski, Michael E.; Miller, Naomi J.

    2011-12-16

    This paper presents the measured flicker found in a variety of traditional lighting technology products, as well as a sample of commercially available SSL products, and addresses the question of whether SSL sources modulate luminous flux any differently than the traditional sources the lighting industry has been built on.

  6. Energy Department Announces Winners of Next Generation Luminaires™ Solid-State Lighting Design Competition

    Broader source: Energy.gov [DOE]

    The Energy Department announced winners of its seventh annual Next Generation LuminairesTM (NGL) design competition for indoor and outdoor lighting during the LIGHTFAIR® International trade show in New York.

  7. III-nitride quantum dots for ultra-efficient solid-state lighting

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wierer, Jr., Jonathan J.; Tansu, Nelson; Fischer, Arthur J.; Tsao, Jeffrey Y.

    2016-05-01

    III-nitride light-emitting diodes (LEDs) and laser diodes (LDs) are ultimately limited in performance due to parasitic Auger recombination. For LEDs, the consequences are poor efficiencies at high current densities; for LDs, the consequences are high thresholds and limited efficiencies. Here, we present arguments for III-nitride quantum dots (QDs) as active regions for both LEDs and LDs, to circumvent Auger recombination and achieve efficiencies at higher current densities that are not possible with quantum wells. QD-based LDs achieve gain and thresholds at lower carrier densities before Auger recombination becomes appreciable. QD-based LEDs achieve higher efficiencies at higher currents because of highermore » spontaneous emission rates and reduced Auger recombination. The technical challenge is to control the size distribution and volume of the QDs to realize these benefits. In conclusion, if constructed properly, III-nitride light-emitting devices with QD active regions have the potential to outperform quantum well light-emitting devices, and enable an era of ultra-efficient solidstate lighting.« less

  8. Development of Efficient UV-LED Phosphor Coatings for Energy Saving Solid State Lighting

    SciTech Connect (OSTI)

    Uwe Happek

    2006-05-15

    The University of Georgia, in collaboration with GE Global Research, has investigated the relevant quenching mechanism of phosphor coatings used in white light devices based on UV LEDs. The final goal of the project was the design and fabrication of a high-efficacy white light UV-LED device through improved geometry and optimized phosphor coatings. At the end of the research period, which was extended to seamlessly carry over the research to a follow-up program, we have demonstrated a two-fold improvement in the conversion efficiency of a white light LED device, where the increase efficacy is due to both improved phosphor quantum efficiency and lamp geometry. Working prototypes have been displayed at DOE sponsored meetings and during the final presentation at the DOE Headquarters in Washington, DC. During the first phase of the project, a fundamental understanding of quenching processes in UV-LEDs was obtained, and the relationships that describe the performance of the phosphor as a function of photon flux, temperature, and phosphor composition were established. In the second phase of the project, these findings were then implemented to design the improved UV-LED lamp. In addition, our research provides a road map for the design of efficient white light LEDs, which will be an important asset during a follow-up project led by GE.

  9. Solid-state radioluminescent zeolite-containing composition and light sources

    DOE Patents [OSTI]

    Clough, Roger L.; Gill, John T.; Hawkins, Daniel B.; Renschler, Clifford L.; Shepodd, Timothy J.; Smith, Henry M.

    1992-01-01

    A new type of RL light source consisting of a zeolite crystalline material, the intralattice spaces of which a tritiated compound and a luminophore are sorbed, and which material is optionally further dispersed in a refractive index-matched polymer matrix.

  10. Development of UV-LED Phosphor Coatings for High Efficiency Solid State Lighting

    SciTech Connect (OSTI)

    U. Happek

    2005-01-01

    The University of Georgia, in collaboration with GE Global Research, is investigating the relevant quenching mechanism of phosphor coatings used in white light devices based on UV LEDs in a focused eighteen month program. The final goal is the design of high-efficacy white UV-LEDs through improved and optimized phosphor coatings. At the end of the first year, we have reached a fundamental understanding of quenching processes in UV-LED phosphors and have observed severe quenching in standard devices under extreme operating conditions. Relationships are being established that describe the performance of the phosphor as a function of photon flux, temperature, and phosphor composition. These relationships will provide a road map for the design of efficient white light LEDs during the final six months of the project.

  11. Rapid Microwave Preparation of Highly Efficient Ce[superscript 3+]-Substituted Garnet Phosphors for Solid State White Lighting

    SciTech Connect (OSTI)

    Birkel, Alexander; Denault, Kristin A.; George, Nathan C.; Doll, Courtney E.; Hry, Bathylle; Mikhailovsky, Alexander A.; Birkel, Christina S.; Hong, Byung-Chul; Seshadri, Ram (UCSB); (Mitsubishi)

    2012-04-30

    Ce{sup 3+}-substituted aluminum garnet compounds of yttrium (Y{sub 3}Al{sub 5}O{sub 12}) and lutetium (Lu{sub 3}Al{sub 5}O{sub 12}) - both important compounds in the generation of (In,Ga)N-based solid state white lighting - have been prepared using a simple microwave heating technique involving the use of a microwave susceptor to provide the initial heat source. Carbon used as the susceptor additionally creates a reducing atmosphere around the sample that helps stabilize the desired luminescent compound. High quality, phase-pure materials are prepared within a fraction of the time and using a fraction of the energy required in a conventional ceramic preparation; the microwave technique allows for a reduction of about 95% in preparation time, making it possible to obtain phase pure, Ce{sup 3+}-substituted garnet compounds in under 20 min of reaction time. It is estimated that the overall reduction in energy compared with ceramic routes as practiced in the lab is close to 99%. Conventionally prepared material is compared with material prepared using microwave heating in terms of structure, morphology, and optical properties, including quantum yield and thermal quenching of luminescence. Finally, the microwave-prepared compounds have been incorporated into light-emitting diode 'caps' to test their performance characteristics in a real device, in terms of their photon efficiency and color coordinates.

  12. Solid State Lighting Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Lens Aging Model Reflector Aging Model OPTICS Lumen Maintenance Model END Design Weighting Factors for Lens & Reflector Accomplishments * System-level model for lumen maintenance ...

  13. Solid State Lighting Reliability

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... color shift to customer satisfaction of luminaires - Involves more than just the LED * Optics, power supply * Limitations on LM-80 data for LEDs - Accuracy depends on test length - ...

  14. Solid-State Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear Energy

  15. Solid-State Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear

  16. Solid-State Lighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy Nuclear

  17. Solid State Lighting Program

    SciTech Connect (OSTI)

    Theodore D. Moustakas

    2007-11-30

    The project had two main tasks: One addressed the materials and device development and it was carried out at Boston University. The second addressed the theory and simulation of materials and devices and it was carried out at Science Application International Corporation (SAIC). Each task had a number of sub-tasks which are described in the following table. Progress in these tasks is described in this section.

  18. Solid-State Lighting on a Shoestring Budget: The Economics of Off-Grid Lighting for Small Businesses in Kenya

    SciTech Connect (OSTI)

    Radecsky, Kristen; Johnstone, Peter; Jacobson, Arne; Mills, Evan

    2008-12-14

    superior lighting services to low income people in off-grid areas of developing countries, many of whom currently rely on fuel based lighting sources such as kerosene. If this potential is to be achieved in the near term, however, manufacturers must produce off-grid lighting products that are inexpensive, perform well, and meet the needs of potential end users. At present, relatively few products meet all three of these goals. In this article, we report results from a detailed study of lighting use by micro-enterprises in two small towns in Kenya's Rift Valley Province. The work included a survey about lighting use by 50 small businesses, careful measurements of kerosene lighting use patterns and associated costs for 23 of these businesses, and a subsequent field trial in which 14 of the 23 businesses purchased and used low cost LED lamps over a number of months.

  19. Chip-Scale Power Conversion for LED Lighting: Integrated Power Chip Converter for Solid-State Lighting

    SciTech Connect (OSTI)

    2010-10-01

    ADEPT Project: Teledyne is developing cost-effective power drivers for energy-efficient LED lights that fit on a compact chip. These power drivers are important because they transmit power throughout the LED device. Traditional LED driver components waste energy and don't last as long as the LED itself. They are also large and bulky, so they must be assembled onto a circuit board separately which increases the overall manufacturing cost of the LED light. Teledyne is shrinking the size and improving the efficiency of its LED driver components by using thin layers of an iron magnetic alloy and new gallium nitride on silicon devices. Smaller, more efficient components will enable the drivers to be integrated on a single chip, reducing costs. The new semiconductors in Teledyne's drivers can also handle higher levels of power and last longer without sacrificing efficiency. Initial applications for Teledyne's LED power drivers include refrigerated grocery display cases and retail lighting.

  20. Solid state optical microscope

    DOE Patents [OSTI]

    Young, Ian T.

    1983-01-01

    A solid state optical microscope wherein wide-field and high-resolution images of an object are produced at a rapid rate by utilizing conventional optics with a charge-coupled photodiode array. A galvanometer scanning mirror, for scanning in one of two orthogonal directions is provided, while the charge-coupled photodiode array scans in the other orthogonal direction. Illumination light from the object is incident upon the photodiodes, creating packets of electrons (signals) which are representative of the illuminated object. The signals are then processed, stored in a memory, and finally displayed as a video signal.

  1. Solid state optical microscope

    DOE Patents [OSTI]

    Young, I.T.

    1983-08-09

    A solid state optical microscope wherein wide-field and high-resolution images of an object are produced at a rapid rate by utilizing conventional optics with a charge-coupled photodiode array. A galvanometer scanning mirror, for scanning in one of two orthogonal directions is provided, while the charge-coupled photodiode array scans in the other orthogonal direction. Illumination light from the object is incident upon the photodiodes, creating packets of electrons (signals) which are representative of the illuminated object. The signals are then processed, stored in a memory, and finally displayed as a video signal. 2 figs.

  2. Final report on grand challenge LDRD project : a revolution in lighting : building the science and technology base for ultra-efficient solid-state lighting.

    SciTech Connect (OSTI)

    Copeland, Robert Guild; Mitchell, Christine Charlotte; Follstaedt, David Martin; Lee, Stephen Roger; Shul, Randy John; Fischer, Arthur Joseph; Chow, Weng Wah Dr.; Myers, Samuel Maxwell, Jr.; Thoma, Steven George; Gee, James Martin; Coltrin, Michael Elliott; Burdick, Brent A.; Salamone, Angelo, L., Jr.; Hadley, G. Ronald; Elliott, Russell D.; Campbell, Jonathan M.; Abrams, Billie Lynn; Wendt, Joel Robert; Pawlowski, Roger Patrick; Simpson, Regina Lynn; Kurtz, Steven Ross; Cole, Phillip James; Fullmer, Kristine Wanta; Seager, Carleton Hoover; Bogart, Katherine Huderle Andersen; Biefeld, Robert Malcolm; Kerley, Thomas M.; Norman, Adam K.; Tallant, David Robert; Woessner, Stephen Matthew; Figiel, Jeffrey James; Moffat, Harry K.; Provencio, Paula Polyak; Emerson, John Allen; Kaplar, Robert James; Wilcoxon, Jess Patrick; Waldrip, Karen Elizabeth; Rohwer, Lauren Elizabeth Shea; Cross, Karen Charlene; Wright, Alan Francis; Gonzales, Rene Marie; Salinger, Andrew Gerhard; Crawford, Mary Hagerott; Garcia, Marie L.; Allen, Mark S.; Southwell, Edwin T.; Bauer, Tom M.; Monson, Mary Ann; Tsao, Jeffrey Yeenien; Creighton, James Randall; Allerman, Andrew Alan; Simmons, Jerry A.; Boyack, Kevin W.; Jones, Eric Daniel; Moran, Michael P.; Pinzon, Marcia J.; Pinson, Ariane O.; Miksovic, Ann E.; Wang, George T.; Ashby, Carol Iris Hill; Missert, Nancy A.; Koleske, Daniel David; Rahal, Nabeel M.

    2004-06-01

    This SAND report is the final report on Sandia's Grand Challenge LDRD Project 27328, 'A Revolution in Lighting -- Building the Science and Technology Base for Ultra-Efficient Solid-state Lighting.' This project, which for brevity we refer to as the SSL GCLDRD, is considered one of Sandia's most successful GCLDRDs. As a result, this report reviews not only technical highlights, but also the genesis of the idea for Solid-state Lighting (SSL), the initiation of the SSL GCLDRD, and the goals, scope, success metrics, and evolution of the SSL GCLDRD over the course of its life. One way in which the SSL GCLDRD was different from other GCLDRDs was that it coincided with a larger effort by the SSL community - primarily industrial companies investing in SSL, but also universities, trade organizations, and other Department of Energy (DOE) national laboratories - to support a national initiative in SSL R&D. Sandia was a major player in publicizing the tremendous energy savings potential of SSL, and in helping to develop, unify and support community consensus for such an initiative. Hence, our activities in this area, discussed in Chapter 6, were substantial: white papers; SSL technology workshops and roadmaps; support for the Optoelectronics Industry Development Association (OIDA), DOE and Senator Bingaman's office; extensive public relations and media activities; and a worldwide SSL community website. Many science and technology advances and breakthroughs were also enabled under this GCLDRD, resulting in: 55 publications; 124 presentations; 10 book chapters and reports; 5 U.S. patent applications including 1 already issued; and 14 patent disclosures not yet applied for. Twenty-six invited talks were given, at prestigious venues such as the American Physical Society Meeting, the Materials Research Society Meeting, the AVS International Symposium, and the Electrochemical Society Meeting. This report contains a summary of these science and technology advances and breakthroughs

  3. Solid-state radioluminescent compositions

    DOE Patents [OSTI]

    Clough, Roger L.; Gill, John T.; Hawkins, Daniel B.; Renschler, Clifford L.; Shepodd, Timothy J.; Smith, Henry M.

    1991-01-01

    A solid state radioluminescent composition for light source comprises an optically clear polymer organic matrix containing tritiated organic materials and dyes capable of "red" shifting primary scintillation emissions from the polymer matrix. The tritiated organic materials are made by reducing, with tritium, an unsaturated organic compound that prior to reduction contains olefinic or alkynylic bonds.

  4. Solid State Division

    SciTech Connect (OSTI)

    Green, P.H.; Watson, D.M.

    1989-08-01

    This report contains brief discussions on work done in the Solid State Division of Oak Ridge National Laboratory. The topics covered are: Theoretical Solid State Physics; Neutron scattering; Physical properties of materials; The synthesis and characterization of materials; Ion beam and laser processing; and Structure of solids and surfaces. (LSP)

  5. Solid state switch

    DOE Patents [OSTI]

    Merritt, Bernard T.; Dreifuerst, Gary R.

    1994-01-01

    A solid state switch, with reverse conducting thyristors, is designed to operate at 20 kV hold-off voltage, 1500 A peak, 1.0 .mu.s pulsewidth, and 4500 pps, to replace thyratrons. The solid state switch is more reliable, more economical, and more easily repaired. The switch includes a stack of circuit card assemblies, a magnetic assist and a trigger chassis. Each circuit card assembly contains a reverse conducting thyristor, a resistor capacitor network, and triggering circuitry.

  6. Energy Department Announces $4 Million Solicitation for Solid-State

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lighting Research | Department of Energy 4 Million Solicitation for Solid-State Lighting Research Energy Department Announces $4 Million Solicitation for Solid-State Lighting Research August 29, 2005 - 2:46pm Addthis Technology has Potential to Double Lighting Efficiency in U.S., Lowering Energy Bills WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced a $4 million solicitation for research into solid-state lighting (SSL) that has the potential to create light with virtually

  7. Solid state switch

    DOE Patents [OSTI]

    Merritt, B.T.; Dreifuerst, G.R.

    1994-07-19

    A solid state switch, with reverse conducting thyristors, is designed to operate at 20 kV hold-off voltage, 1,500 A peak, 1.0 [mu]s pulsewidth, and 4,500 pps, to replace thyratrons. The solid state switch is more reliable, more economical, and more easily repaired. The switch includes a stack of circuit card assemblies, a magnetic assist and a trigger chassis. Each circuit card assembly contains a reverse conducting thyristor, a resistor capacitor network, and triggering circuitry. 6 figs.

  8. Characterization of solid state nuclear track detectors of the polyallyl-diglycol-carbonate (CR-39/PM-355) type for light charged particle spectroscopy

    SciTech Connect (OSTI)

    Malinowska, A. Jask?a, M.; Korman, A.; Kuk, M.; Szyd?owski, A.

    2014-12-15

    This paper presents a method which uses the characteristics of the etch pits induced in a polyallyl-diglycol-carbonate (PADC) detector of the CR-39/PM-355 type to estimate particle energy. This method is based on the data provided by a semiautomatic system that selects tracks according to two parameters, crater diameters, and mean gray level values. In this paper we used the results of the calibration measurements that were obtained in our laboratory in the period 20002014. Combining the information on the two parameters it is possible to determine unambiguously the incident projectile energy values. The paper presents the results of an attempt to estimate the energy resolution of the method when analyzing the tracks produced in the CR-39/PM-355 detector by energetic ions such as alpha particles, protons, and deuterons. We discuss the energy resolution of the measurement of light charged particle energy which is based on the parameters (crater diameter and mean gray level value) of tracks induced in solid state nuclear track detectors of the PADC type.

  9. Solid-state optical microscope

    DOE Patents [OSTI]

    Young, I.T.

    1981-01-07

    A solid state optical microscope is described wherein wide-field and high-resolution images of an object are produced at a rapid rate by utilizing conventional optics with a charge-coupled photodiode array. Means for scanning in one of two orthogonal directions are provided, while the charge-coupled photodiode array scans in the other orthogonal direction. Illumination light from the object is incident upon the photodiodes, creating packets of electrons (signals) which are representative of the illuminated object. The signals are then processed, stored in a memory, and finally displayed as a video signal.

  10. Solid state oxygen sensor

    DOE Patents [OSTI]

    Garzon, F.H.; Chung, B.W.; Raistrick, I.D.; Brosha, E.L.

    1996-08-06

    Solid state oxygen sensors are provided with a yttria-doped zirconia as an electrolyte and use the electrochemical oxygen pumping of the zirconia electrolyte. A linear relationship between oxygen concentration and the voltage arising at a current plateau occurs when oxygen accessing the electrolyte is limited by a diffusion barrier. A diffusion barrier is formed herein with a mixed electronic and oxygen ion-conducting membrane of lanthanum-containing perovskite or zirconia-containing fluorite. A heater may be used to maintain an adequate oxygen diffusion coefficient in the mixed conducting layer. 4 figs.