National Library of Energy BETA

Sample records for blue ribbon panel

  1. Blue Ribbon Panel Recommendations Report

    Broader source: Energy.gov [DOE]

    The Department of Energy's Geothermal Technologies Office (formerly Geothermal Technologies Program) assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a...

  2. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    SciTech Connect (OSTI)

    none,

    2011-06-17

    The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

  3. Geothermal Technologies Program Blue Ribbon Panel Recommendations

    Office of Energy Efficiency and Renewable Energy (EERE)

    This report describes the recommendations of the Geothermal Blue Ribbon Panel, a panel of geothermal experts assembled in March 2011 for a discussion on the future of geothermal energy in the U.S.

  4. Report of the Blue Ribbon Panel on the Review of the Radiation...

    Energy Savers [EERE]

    Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation Report of the Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation October 11, ...

  5. Report of the Blue Ribbon Panel on the Review of the Radiation Effects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Foundation | Department of Energy Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation Report of the Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation October 11, 1995 This report summarizes the findings of the Blue Ribbon Panel's review of the RERF scientific projects and future research plans The report recommended that the core studies be continued for the next 20 years. Report of the Blue Ribbon Panel on the Review of the

  6. Blue Ribbon Panel Recommendations Report Now Available

    Broader source: Energy.gov [DOE]

    On March 22 and 23, 2011, the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy assembled a panel of geothermal experts in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the U.S.

  7. Remarks by Rick McLeod Yucca Mountain Blue Ribbon Panel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rick McLeod Yucca Mountain Blue Ribbon Panel Executive Director March 25, 2010 Savannah River Site Community Reuse Organization 1 GOOD MORNING. I AM RICK MCLEOD...EXECUTIVE ...

  8. FERN Blue Ribbon Wind Farm I | Open Energy Information

    Open Energy Info (EERE)

    FERN Blue Ribbon Wind Farm I Jump to: navigation, search Name FERN Blue Ribbon Wind Farm I Facility FERN Blue Ribbon Wind Farm I Sector Wind energy Facility Type Offshore Wind...

  9. Blue Ribbon Commission Tour of Hanford Site

    SciTech Connect (OSTI)

    Paul Saueressig

    2010-07-14

    The Blue Ribbon Commission on America's Nuclear Future toured the Department of Energy's Hanford Site on July 14, 2010. Commission members, invited guests, and members of the public visited facilities that store high-level, radioactive waste.

  10. Blue Ribbon Commission Tour of Hanford Site

    ScienceCinema (OSTI)

    Paul Saueressig

    2010-09-01

    The Blue Ribbon Commission on America's Nuclear Future toured the Department of Energy's Hanford Site on July 14, 2010. Commission members, invited guests, and members of the public visited facilities that store high-level, radioactive waste.

  11. FERN Blue Ribbon Wind Farm II* | Open Energy Information

    Open Energy Info (EERE)

    II* Jump to: navigation, search Name FERN Blue Ribbon Wind Farm II* Facility FERN Blue Ribbon Wind Farm II* Sector Wind energy Facility Type Offshore Wind Facility Status Proposed...

  12. The Blue Ribbon Commission Offers Strong Step Forward | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy The Blue Ribbon Commission Offers Strong Step Forward The Blue Ribbon Commission Offers Strong Step Forward July 29, 2011 - 12:27pm Addthis Damien LaVera Damien LaVera Deputy Director, Office of Public Affairs Today, the Blue Ribbon Commission on America's Nuclear Future issued a draft of its recommendations. The Obama Administration continues to believe that nuclear energy has an important role to play as America moves to a clean energy future. As part of our commitment to restarting

  13. Blue Ribbon Commission on America's Nuclear Future to Hold First...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington, D.C. - On Thursday, March 25th and Friday, March 26th, the Blue Ribbon Commission on America's Nuclear Future, co-chaired by former Congressman Lee Hamilton and former ...

  14. Blue Ribbon Commission on America's Nuclear Future Charter | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Blue Ribbon Commission on America's Nuclear Future Charter Blue Ribbon Commission on America's Nuclear Future Charter March 2, 2010 - 12:00am Addthis The Secretary of Energy, acting at the direction of the President, is establishing the Commission to conduct a comprehensive review of policies for managing the back end of the nuclear fuel cycle, including all alternatives for the storage, processing, and disposal of civilian and defense used nuclear fuel, high-level waste, and

  15. Blue Ribbon Commission on America's Nuclear Future

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... of tens of thousands of tons of spent fuel at more than 70 nuclear power plant sites around this ... only of numerous former expert panels 37 that have looked at the ...

  16. Louisiana Blue Ribbon Commission on Bayou Corne Safety

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blue Ribbon Commission on Bayou Corne Safety - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management

  17. Blue Ribbon Commission on America's Nuclear Future Report to the Secretary of Energy

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Blue Ribbon Commission on America’s Nuclear Future (BRC) was formed by the Secretary of Energy at the request of the President to conduct a comprehensive review of policies for managing the...

  18. Secretary Moniz's Remarks on "A Look Back on the Blue Ribbon Commission

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on America's Nuclear Future" at the Bipartisan Policy Center -- As Delivered | Department of Energy "A Look Back on the Blue Ribbon Commission on America's Nuclear Future" at the Bipartisan Policy Center -- As Delivered Secretary Moniz's Remarks on "A Look Back on the Blue Ribbon Commission on America's Nuclear Future" at the Bipartisan Policy Center -- As Delivered March 24, 2015 - 1:30pm Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy Thank you,

  19. Remarks by Federal Blue Ribbon Commission J. David Jameson Atlanta, GA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Federal Blue Ribbon Commission J. David Jameson Atlanta, GA October 18, 2011 Good Morning. I am David Jameson. I am President and CEO of the Greater Aiken, South Carolina, Chamber of Commerce. I am here today in my capacity as current Chairman of the SRS Community Reuse Organization. The SRSCRO is a non-profit regional group supporting economic diversification and job creation in a five-county in Georgia and South Carolina near the Department of Energy's Savannah River Site. We are unique among

  20. The Time Needed to Implement the Blue Ribbon Commission Recommendation on Interim Storage - 13124

    SciTech Connect (OSTI)

    Voegele, Michael D.; Vieth, Donald

    2013-07-01

    The report of the Blue Ribbon Commission on America's Nuclear Future [1] makes a number of important recommendations to be considered if Congress elects to redirect U.S. high-level radioactive waste disposal policy. Setting aside for the purposes of this discussion any issues related to political forces leading to stopping progress on the Yucca Mountain project and driving the creation of the Commission, an important recommendation of the Commission was to institute prompt efforts to develop one or more consolidated storage facilities. The Blue Ribbon Commission noted that this recommended strategy for future storage and disposal facilities and operations should be implemented regardless of what happens with Yucca Mountain. It is too easy, however, to focus on interim storage as an alternative to geologic disposal. The Blue Ribbon Commission report does not go far enough in addressing the magnitude of the contentious problems associated with reopening the issues of relative authorities of the states and federal government with which Congress wrestled in crafting the Nuclear Waste Policy Act [2]. The Blue Ribbon Commission recommendation for prompt adoption of an interim storage program does not appear to be fully informed about the actions that must be taken, the relative cost of the effort, or the realistic time line that would be involved. In essence, the recommendation leaves to others the details of the systems engineering analyses needed to understand the nature and details of all the operations required to reach an operational interim storage facility without derailing forever the true end goal of geologic disposal. The material presented identifies a number of impediments that must be overcome before the country could develop a centralized federal interim storage facility. In summary, and in the order presented, they are: 1. Change the law, HJR 87, PL 107-200, designating Yucca Mountain for the development of a repository. 2. Bring new nuclear waste

  1. Blue Ribbon Commission on America's Nuclear Future: Report to the Secretary of Energy

    SciTech Connect (OSTI)

    2012-01-01

    Preamble The Blue Ribbon Commission on America’s Nuclear Future (BRC) was formed by the Secretary of Energy at the request of the President to conduct a comprehensive review of policies for managing the back end of the nuclear fuel cycle and recommend a new strategy. It was co-chaired by Rep. Lee H. Hamilton and Gen. Brent Scowcroft. Other Commissioners are Mr. Mark H. Ayers, the Hon. Vicky A. Bailey, Dr. Albert Carnesale, Sen. Pete Domenici, Ms. Susan Eisenhower, Sen. Chuck Hagel, Mr. Jonathan Lash, Dr. Allison M. Macfarlane, Dr. Richard A. Meserve, Dr. Ernest J. Moniz, Dr. Per Peterson, Mr. John Rowe, and Rep. Phil Sharp. The Commission and its subcommittees met more than two dozen times between March 2010 and January 2012 to hear testimony from experts and stakeholders, to visit nuclear waste management facilities in the United States and abroad, and to discuss the issues identified in its Charter. Additionally, in September and October 2011, the Commission held five public meetings, in different regions of the country, to hear feedback on its draft report. A wide variety of organizations, interest groups, and individuals provided input to the Commission at these meetings and through the submission of written materials. Copies of all of these submissions, along with records and transcripts of past meetings, are available at the BRC website (www.brc.gov). This report highlights the Commission’s findings and conclusions and presents recommendations for consideration by the Administration and Congress, as well as interested state, tribal and local governments, other stakeholders, and the public.

  2. Thiogallate Blue Phosphors for Thin Film Electroluminescent Flat Panel Displays

    SciTech Connect (OSTI)

    Dye, Robert C.; Tuenge, Richard T.

    1997-04-03

    This project helped to develop a metal-organic chemical vapor deposition (MOCVD) method that could improve the efficiency of the blue phosphor for full color thin-film electroluminescent (TFEL) flat panel displays. High quality SrS and SrS:Ce thin films were deposited from Sr(thd)2, Ce(thd)4 and H2S via a low pressure MOCVD process. Film characteristics were found to be insensitive to the presence of the cerium dopant in the concn. range investigated. Depositions were carried out for a wide temp. range (250-550°C). Deposition rates were found to be relatively insensitive for the temp. range investigated. The films produced were found to be highly cryst. at all temps. investigated. Deposited material showed texturing as a function of substrate material and temp. FWHM of the a 111 ii reflections were found to have a 2Q values of 0.15-0.18 deg. for all temps. RBS and AES shows stoichiometric 1 : 1 SrS with less than 2% carbon and oxygen contaminates. ERO indicates the films to have 1- 2.5% hydrogen. Films doped with 0.019-0.043 atom % Ce showed weak blue-green to green PL with increasing dopant concn. Doped films yielded up to 3.2 cd/m2 EL emission with CIE coordinates of x = 0.22 and y = 0.32 and turn-on voltages of 150-250 V.

  3. Blue Ribbon Commission, Yucca Mountain Closure, Court Actions - Future of Decommissioned Reactors, Operating Reactors and Nuclear Power - 13249

    SciTech Connect (OSTI)

    Devgun, Jas S.

    2013-07-01

    Issues related to back-end of the nuclear fuel cycle continue to be difficult for the commercial nuclear power industry and for the decision makers at the national and international level. In the US, the 1982 NWPA required DOE to develop geological repositories for SNF and HLW but in spite of extensive site characterization efforts and over ten billion dollars spent, a repository opening is nowhere in sight. There has been constant litigation against the DOE by the nuclear utilities for breach of the 'standard contract' they signed with the DOE under the NWPA. The SNF inventory continues to rise both in the US and globally and the nuclear industry has turned to dry storage facilities at reactor locations. In US, the Blue Ribbon Commission on America's Nuclear Future issued its report in January 2012 and among other items, it recommends a new, consent-based approach to siting of facilities, prompt efforts to develop one or more geologic disposal facilities, and prompt efforts to develop one or more consolidated storage facilities. In addition, the March 2011 Fukushima Daiichi accident had a severe impact on the future growth of nuclear power. The nuclear industry is focusing on mitigation strategies for beyond design basis events and in the US, the industry is in the process of implementing the recommendations from NRC's Near Term Task Force. (authors)

  4. Societal-Equity-Enhancing Criteria and Facility-Host Incentives Supporting Five Key Elements in the January 2012 Blue Ribbon Commission Report - 13015

    SciTech Connect (OSTI)

    Eriksson, Leif G.; Dials, George E.; George, Critz H.

    2013-07-01

    In February 2009, the Obama Administration announced it would abandon USA's only candidate SNF/HLW-disposal facility since 1987. In 2010, all related activities were stopped and the Blue Ribbon Commission on America's Nuclear Future was established 'to recommend a new strategy for managing the back end of the nuclear fuel cycle', which it did in January 2012, emphasizing eight key elements. However, Key Element 1, 'A new, consent-based approach to siting future nuclear facilities', is qualitative/indeterminate rather than quantitative/measurable. It is thus highly-susceptible to semantic permutations that could extend rather than, as intended, expedite the siting of future nuclear facilities unless it also defines: a) Whose consent is needed?; and b) What constitutes consent? The following 'generic', radiation-risk- and societal-equity-based criteria address these questions: 1. Identify areas affected by projected radiation and other health risks from: a. The proposed nuclear facility (facility stakeholders); and b. The related nuclear-materials-transportation routes (transportation stakeholders); then 2. Surround each stakeholder area with a buffer zone and use this enlarged foot print to identify: a. Stakeholder hosts; and b. Areas not hosting any stakeholder category (interested parties). 3. Define 'consent-based' as being at least 60 percent of the 'population' in the respective stakeholder category and apply this yardstick to both 'in favor' and 'against' votes. Although criteria 1 and 2 also need facility-based definitions to make Key Element 1 measurable, the described siting approach, augmented by related facility-host incentives, would expedite the schedule and reduce the cost for achieving Key Elements 4-6 and 8, politics permitting. (authors)

  5. Blue | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy | Department of Energy Blue Ribbon Commission on America's Nuclear Future Report to the Secretary of Energy Blue Ribbon Commission on America's Nuclear Future Report to the Secretary of Energy The Blue Ribbon Commission on America's Nuclear Future (BRC) was formed by the Secretary of Energy at the request of the President to conduct a comprehensive review of policies for managing the back end of the nuclear fuel cycle and recommend a new strategy. It was cochaired by Rep. Lee H.

  6. TWISTED RIBBON FUEL ELEMENT

    DOE Patents [OSTI]

    Breden, C.R.; Schultz, A.B.

    1961-06-01

    A reactor core formed of bundles of parallel fuel elements in the form of ribbons is patented. The fuel ribbons are twisted about their axes so as to have contact with one another at regions spaced lengthwise of the ribbons and to be out of contact with one another at locations between these spaced regions. The contact between the ribbons is sufficient to allow them to be held together in a stable bundle in a containing tube without intermediate support, while permitting enough space between the ribbon for coolant flowing.

  7. The Environmental Protection Agency's Safety Standards for Disposal of Spent Nuclear Fuel: Potential Path Forward in Response to the Report of the Blue Ribbon Commission on America's Nuclear Future - 13388

    SciTech Connect (OSTI)

    Forinash, Betsy; Schultheisz, Daniel; Peake, Tom

    2013-07-01

    Following the decision to withdraw the Yucca Mountain license application, the Department of Energy created a Blue Ribbon Commission (BRC) on America's Nuclear Future, tasked with recommending a national strategy to manage the back end of the nuclear fuel cycle. The BRC issued its final report in January 2012, with recommendations covering transportation, storage and disposal of spent nuclear fuel (SNF); potential reprocessing; and supporting institutional measures. The BRC recommendations on disposal of SNF and high-level waste (HLW) are relevant to the U.S. Environmental Protection Agency (EPA), which shares regulatory responsibility with the Nuclear Regulatory Commission (NRC): EPA issues 'generally applicable' performance standards for disposal repositories, which are then implemented in licensing. For disposal, the BRC endorses developing one or more geological repositories, with siting based on an approach that is adaptive, staged and consent-based. The BRC recommends that EPA and NRC work cooperatively to issue generic disposal standards-applying equally to all sites-early in any siting process. EPA previously issued generic disposal standards that apply to all sites other than Yucca Mountain. However, the BRC concluded that the existing regulations should be revisited and revised. The BRC proposes a number of general principles to guide the development of future regulations. EPA continues to review the BRC report and to assess the implications for Agency action, including potential regulatory issues and considerations if EPA develops new or revised generic disposal standards. This review also involves preparatory activities to define potential process and public engagement approaches. (authors)

  8. Flexible optical panel

    DOE Patents [OSTI]

    Veligdan, James T.

    2001-01-01

    A flexible optical panel includes laminated optical waveguides, each including a ribbon core laminated between cladding, with the core being resilient in the plane of the core for elastically accommodating differential movement thereof to permit winding of the panel in a coil.

  9. AMO's Kelly Visconti Joins Ribbon Cutting of $50 million Indiana

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Institute | Department of Energy AMO's Kelly Visconti Joins Ribbon Cutting of $50 million Indiana Manufacturing Institute AMO's Kelly Visconti Joins Ribbon Cutting of $50 million Indiana Manufacturing Institute July 29, 2016 - 4:21pm Addthis (From Left to Right) Dan Hasler, President, Purdue Research Foundation; Ian Steff, Executive Vice President and Chief Innovation Officer, Indiana Economic Development Corporation; Craig Blue, CEO Institute for Advanced Composites

  10. Blue Ribbon Commission (BRC) Activities - SRSCRO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In 2009, the Obama administration canceled plans to build a permanent underground nuclear storage facility at Yucca Mountain in Nevada. The Department of Energy formed the ...

  11. CIRCULAR RIBBON FLARES AND HOMOLOGOUS JETS

    SciTech Connect (OSTI)

    Wang Haimin; Liu Chang

    2012-12-01

    Solar flare emissions in the chromosphere often appear as elongated ribbons on both sides of the magnetic polarity inversion line (PIL), which has been regarded as evidence of a typical configuration of magnetic reconnection. However, flares having a circular ribbon have rarely been reported, although it is expected in the fan-spine magnetic topology involving reconnection at a three-dimensional (3D) coronal null point. We present five circular ribbon flares with associated surges, using high-resolution and high-cadence H{alpha} blue wing observations obtained from the recently digitized films of Big Bear Solar Observatory. In all the events, a central parasitic magnetic field is encompassed by the opposite polarity, forming a circular PIL traced by filament material. Consequently, a flare kernel at the center is surrounded by a circular flare ribbon. The four homologous jet-related flares on 1991 March 17 and 18 are of particular interest, as (1) the circular ribbons brighten sequentially, with cospatial surges, rather than simultaneously, (2) the central flare kernels show an intriguing 'round-trip' motion and become elongated, and (3) remote brightenings occur at a region with the same magnetic polarity as the central parasitic field and are co-temporal with a separate phase of flare emissions. In another flare on 1991 February 25, the circular flare emission and surge activity occur successively, and the event could be associated with magnetic flux cancellation across the circular PIL. We discuss the implications of these observations combining circular flare ribbons, homologous jets, and remote brightenings for understanding the dynamics of 3D magnetic restructuring.

  12. Antiguided fiber ribbon laser

    DOE Patents [OSTI]

    Wilcox, Russel B.; Page, Ralph H.; Beach, Raymond J.; Feit, Michael D.; Payne, Stephen A.

    2003-05-27

    The invention is a ribbon of an optical material with a plurality of cores that run along its length. The plurality of cores includes lasing impurity doped cores in an alternating spaced arrangement with index-modifying impurity doped cores. The ribbon comprises an index of refraction that is substantially equal to or greater than the indices of refraction of said array of lasing impurity doped cores. Index-increasing impurity doped cores promote antiguiding and leaky modes which provide more robust single "supermode" operation.

  13. FINE STRUCTURE OF FLARE RIBBONS AND EVOLUTION OF ELECTRIC CURRENTS

    SciTech Connect (OSTI)

    Sharykin, I. N.; Kosovichev, A. G.

    2014-06-10

    Emission of solar flares across the electromagnetic spectrum is often observed in the form of two expanding ribbons. The standard flare model explains flare ribbons as footpoints of magnetic arcades, emitting due to interaction of energetic particles with the chromospheric plasma. However, the physics of this interaction and properties of the accelerated particles are still unknown. We present results of multiwavelength observations of the C2.1 flare of 2013 August 15, observed with the New Solar Telescope of the Big Bear Solar Observatory, and the Solar Dynamics Observatory, GOES, and Fermi spacecraft. The observations reveal previously unresolved sub-arcsecond structure of flare ribbons in regions of strong magnetic field consisting from numerous small-scale bright knots. We observe a red-blue asymmetry of H{sub α} flare ribbons with a width as small as ∼100 km. We discuss the relationship between the ribbons and vertical electric currents estimated from vector magnetograms, and show that Joule heating can be responsible for energization of H{sub α} knots in the ribbons.

  14. Interactive optical panel

    DOE Patents [OSTI]

    Veligdan, James T.

    1995-10-03

    An interactive optical panel assembly 34 includes an optical panel 10 having a plurality of ribbon optical waveguides 12 stacked together with opposite ends thereof defining panel first and second faces 16, 18. A light source 20 provides an image beam 22 to the panel first face 16 for being channeled through the waveguides 12 and emitted from the panel second face 18 in the form of a viewable light image 24a. A remote device 38 produces a response beam 40 over a discrete selection area 36 of the panel second face 18 for being channeled through at least one of the waveguides 12 toward the panel first face 16. A light sensor 42,50 is disposed across a plurality of the waveguides 12 for detecting the response beam 40 therein for providing interactive capability.

  15. Interactive optical panel

    DOE Patents [OSTI]

    Veligdan, J.T.

    1995-10-03

    An interactive optical panel assembly includes an optical panel having a plurality of ribbon optical waveguides stacked together with opposite ends thereof defining panel first and second faces. A light source provides an image beam to the panel first face for being channeled through the waveguides and emitted from the panel second face in the form of a viewable light image. A remote device produces a response beam over a discrete selection area of the panel second face for being channeled through at least one of the waveguides toward the panel first face. A light sensor is disposed across a plurality of the waveguides for detecting the response beam therein for providing interactive capability. 10 figs.

  16. Melt dumping in string stabilized ribbon growth

    DOE Patents [OSTI]

    Sachs, Emanuel M.

    1986-12-09

    A method and apparatus for stabilizing the edge positions of a ribbon drawn from a melt includes the use of wettable strings drawn in parallel up through the melt surface, the ribbon being grown between the strings. A furnace and various features of the crucible used therein permit continuous automatic growth of flat ribbons without close temperature control or the need for visual inspection.

  17. Secretary Chu Announces Blue Ribbon Commission on America's Nuclear...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Jonathan Lash, President, World Resources Institute Allison Macfarlane, Associate Professor of Environmental Science and Policy, George Mason University Dick Meserve, Former ...

  18. Secretary Chu Announces Blue Ribbon Commission on America's Nuclear...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Green Distinguished Professor, Massachusetts Institute of Technology Per Peterson, Professor and Chair, Department of Nuclear Engineering, University of California - Berkeley John ...

  19. Remarks by Federal Blue Ribbon Commission J. David Jameson ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I want to begin today by reiterating our region's continuing belief that the Administration's decision to halt work on Yucca Mountain is wrong headed and counter to the Nation's ...

  20. Task Force for Strategic Developments to Blue Ribbon Commission Recommendations

    Office of Environmental Management (EM)

    Number Program Title Activities Allowed or Unallowed Allowable Costs/Cost Principles Cash Management Davis Bacon Act Eligibility Equipment and Real Property Management Matching, Level of Effort, Earmarking Period of Availability of Federal Funds Procurement/ Suspension/ Debarment Program Income Real Property Acquisition/ Relocation Reporting Subrecipient Monitoring NEPA National Historic Preservation Act Special Tests and Provisions 81.036 Inventions and Innovations Yes Yes Yes Yes Yes Yes Yes

  1. Blue Ribbon Commission on America's Nuclear Future Report to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    It was cochaired by Rep. Lee H. Hamilton and Gen. Brent Scowcroft. Other Commissioners were Mr. Mark H. Ayers, the Hon. Vicky A. Bailey, Dr. Albert Carnesale, Sen. Pete Domenici, ...

  2. Task Force for Strategic Developments to Blue Ribbon Commission...

    Office of Environmental Management (EM)

    Planning Project Overview Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport - Modeling, Simulation and Experimental Integration RD&D Plan...

  3. Savannah River Site Museum Ribbon Cutting

    Broader source: Energy.gov [DOE]

    A ribbon cutting ceremony marked the opening of the new SRS Museum, on October 27, 2014, at the former Dibble Library in Aiken, South Carolina.

  4. Accelerating Fatigue Testing for Cu Ribbon Interconnects (Presentation)

    SciTech Connect (OSTI)

    Bosco, N.; Silverman, T.; Wohlgemuth , J.; Kurtz, S.; Inoue, M.; Sakurai, K.; Shioda, T.; Zenkoh, H.; Miyashita, M.; Tadanori, T.; Suzuki, S.

    2013-05-01

    This presentation describes fatigue experiments and discusses dynamic mechanical loading for Cu ribbon interconnects.

  5. Patterned helical metallic ribbon for continuous edge winding applications

    DOE Patents [OSTI]

    Liebermann, Howard H.; Frischmann, Peter G.; Rosenberry, Jr., George M.

    1983-04-19

    Metallic ribbon having cutout patterns therein is provided in continuous helical form. The cutout patterns may be situated to intersect either or both of the ribbon edges or may be situated entirely within the ribbon. The helical ribbon with the cutout patterns may additionally have a nesting, or self-stacking, feature.

  6. Carbon nanotube fiber spun from wetted ribbon

    DOE Patents [OSTI]

    Zhu, Yuntian T; Arendt, Paul; Zhang, Xiefei; Li, Qingwen; Fu, Lei; Zheng, Lianxi

    2014-04-29

    A fiber of carbon nanotubes was prepared by a wet-spinning method involving drawing carbon nanotubes away from a substantially aligned, supported array of carbon nanotubes to form a ribbon, wetting the ribbon with a liquid, and spinning a fiber from the wetted ribbon. The liquid can be a polymer solution and after forming the fiber, the polymer can be cured. The resulting fiber has a higher tensile strength and higher conductivity compared to dry-spun fibers and to wet-spun fibers prepared by other methods.

  7. Report: EM Energy Park Initiative

    Office of Environmental Management (EM)

    Research Foundation | Department of Energy Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation Report of the Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation October 11, 1995 This report summarizes the findings of the Blue Ribbon Panel's review of the RERF scientific projects and future research plans The report recommended that the core studies be continued for the next 20 years. Report of the Blue Ribbon Panel on the Review of the

  8. Largest Solar Panel Installation at a U.S. University Goes Live |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Largest Solar Panel Installation at a U.S. University Goes Live Largest Solar Panel Installation at a U.S. University Goes Live November 4, 2010 - 6:10pm Addthis Sen. Menendez, Rep. Pascrell, John Lushetsky and other officials at the ribbon cutting. Sen. Menendez, Rep. Pascrell, John Lushetsky and other officials at the ribbon cutting. A couple of weeks ago, I had the opportunity to participate in a ribbon cutting event for the largest solar installation on a United

  9. Blue Note

    ScienceCinema (OSTI)

    Murray Gibson

    2010-01-08

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  10. Blue Note

    SciTech Connect (OSTI)

    Murray Gibson

    2007-04-27

    Argonne's Murray Gibson is a physicist whose life's work includes finding patterns among atoms. The love of distinguishing patterns also drives Gibson as a musician and Blues enthusiast."Blue" notes are very harmonic notes that are missing from the equal temperament scale.The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting.

  11. Savannah River Site Cuts Ribbon for New Salt Waste Processing...

    Office of Environmental Management (EM)

    Savannah River Site Cuts Ribbon for New Salt Waste Processing Facility Savannah River Site Cuts Ribbon for New Salt Waste Processing Facility June 30, 2016 - 12:55pm Addthis DOE ...

  12. Pseudo ribbon metal ion beam source

    SciTech Connect (OSTI)

    Stepanov, Igor B. Ryabchikov, Alexander I.; Sivin, Denis O.; Verigin, Dan A.

    2014-02-15

    The paper describes high broad metal ion source based on dc macroparticle filtered vacuum arc plasma generation with the dc ion-beam extraction. The possibility of formation of pseudo ribbon beam of metal ions with the parameters: ion beam length 0.6 m, ion current up to 0.2 A, accelerating voltage 40 kV, and ion energy up to 160 kV has been demonstrated. The pseudo ribbon ion beam is formed from dc vacuum arc plasma. The results of investigation of the vacuum arc evaporator ion-emission properties are presented. The influence of magnetic field strength near the cathode surface on the arc spot movement and ion-emission properties of vacuum-arc discharge for different cathode materials are determined. It was shown that vacuum-arc discharge stability can be reached when the magnetic field strength ranges from 40 to 70 G on the cathode surface.

  13. BLUE MOUNTAIN | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN BLUE MOUNTAIN PROJECT SUMMARY In September 2010, the Department of Energy issued a $98.5 million partial loan guarantee under the Financial Institution Partnership Program (FIPP) to finance Blue Mountain, a geothermal power plant. The plant is currently harnessing renewable energy by tapping into an

  14. Ribbon cutting marks chemistry laboratory upgrades at Northern New Mexico

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    College Ribbon cutting marks chemistry laboratory upgrades at Northern New Mexico College Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Ribbon cutting marks chemistry laboratory upgrades at Northern New Mexico College Los Alamos National Security, LLC provides support November 1, 2013 Ribbon cutting at Northern New Mexico College As others look on, Northern New Mexico College

  15. Faceted ceramic fibers, tapes or ribbons and epitaxial devices therefrom

    SciTech Connect (OSTI)

    Goyal, Amit

    2013-07-09

    A crystalline article includes a single-crystal ceramic fiber, tape or ribbon. The fiber, tape or ribbon has at least one crystallographic facet along its length, which is generally at least one meter long. In the case of sapphire, the facets are R-plane, M-plane, C-plane or A-plane facets. Epitaxial articles, including superconducting articles, can be formed on the fiber, tape or ribbon.

  16. Faceted ceramic fibers, tapes or ribbons and epitaxial devices therefrom

    DOE Patents [OSTI]

    Goyal, Amit (Knoxville, TN)

    2012-07-24

    A crystalline article includes a single-crystal ceramic fiber, tape or ribbon. The fiber, tape or ribbon has at least one crystallographic facet along its length, which is generally at least one meter long. In the case of sapphire, the facets are R-plane, M-plane, C-plane or A-plane facets. Epitaxial articles, including superconducting articles, can be formed on the fiber, tape or ribbon.

  17. SYMMETRY OF THE IBEX RIBBON OF ENHANCED ENERGETIC NEUTRAL ATOM...

    Office of Scientific and Technical Information (OSTI)

    HELIOSPHERE; INTERSTELLAR SPACE; KEV RANGE; MAGNETIC FIELDS; PLASMA; REFLECTION; SUN; SYMMETRY The circular ribbon of enhanced energetic neutral atom (ENA) emission...

  18. Interconnection Panel

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation—given at at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—discusses the interconnection panel, including an overview of the generation interconnection process (GIP), and interconnection agreements and their terms.

  19. Advisory Panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advisory Panels Print ALS Advisory Panels Many people are involved in developing and expanding the scientific and user programs at the ALS. Members of the committees listed below are either appointed or elected by the user community and/or by ALS or Berkeley Lab management to provide a wide base of communication on issues concerning all aspects of ALS operations and development. Additional information about the role and responsibilities of each group, its membership, and contact information is

  20. Advisory Panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advisory Panels Print ALS Advisory Panels Many people are involved in developing and expanding the scientific and user programs at the ALS. Members of the committees listed below are either appointed or elected by the user community and/or by ALS or Berkeley Lab management to provide a wide base of communication on issues concerning all aspects of ALS operations and development. Additional information about the role and responsibilities of each group, its membership, and contact information is

  1. Accelerating Fatigue Testing for Cu Ribbon Interconnects | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Accelerating Fatigue Testing for Cu Ribbon Interconnects Accelerating Fatigue Testing for Cu Ribbon Interconnects Presented at the 2013 Photovoltaic Module Reliability Workshop; 26-27 February 2013; Denver, Colorado 58369.pdf (3.59 MB) More Documents & Publications Thermal Cycling Combined with Dynamic Mechanical Load: Preliminary Report Physics of Failure of Electrical Interconnects Reliability of Electrical Interconnects

  2. Guidance system for low angle silicon ribbon growth

    DOE Patents [OSTI]

    Jewett, David N.; Bates, Herbert E.; Milstein, Joseph B.

    1986-07-08

    In a low angle silicon sheet growth process, a puller mechanism advances a seed crystal and solidified ribbon from a cooled growth zone in a melt at a low angle with respect to the horizontal. The ribbon is supported on a ramp adjacent the puller mechanism. Variations in the vertical position of the ribbon with respect to the ramp are isolated from the growth end of the ribbon by (1) growing the ribbon so that it is extremely thin, preferably less than 0.7 mm, (2) maintaining a large growth zone, preferably one whose length is at least 5.0 cm, and (3) spacing the ramp from the growth zone by at least 15 cm.

  3. String stabilized ribbon growth a method for seeding same

    DOE Patents [OSTI]

    Sachs, Emanuel M. (39 Harding Ave., Belmont, MA 02178)

    1987-08-25

    This invention is a method of initiating or seeding the growth of a crystalline or polycrystalline ribbon by the String Stabilized Ribbon Growth Method. The method for seeding the crystal growth comprises contacting a melt surface with a seed and two strings used in edge stabilization. The wetted strings attach to the wetted seed as a result of the freezing of the liquid melt. Upon drawing the seed, which is attached to the strings, away from the melt surface a melt liquid meniscus, a seed junction, and a growth interface forms. Further pulling of the attached seed causes a crystal ribbon to grow at the growth interface. The boundaries of the growing ribbon are: at the top the seed junction, at the bottom the freezing boundary of the melt liquid meniscus, and at the edges frozen-in strings.

  4. Alarm Response Training ribbon cutting | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alarm Response Training ... Alarm Response Training ribbon cutting Posted: October 24, 2014 - 4:45pm The Alarm Response Training Academy officially celebrated its new location at the Y-12 National Security Complex Thursday,Oct. 23. On hand to cut the ribbon were (pictured from left) Teresa Robbins, NNSA Production Office Acting Assistant Manager for Environment, Safety, Health and Quality; Anne Harrington, NNSA Deputy Administrator, Defense Nuclear Nonproliferation; and Morgan Smith, Chief

  5. Elastic buckling of AlN ribbons on elastomeric substrate

    SciTech Connect (OSTI)

    Seo, H.-C.; Petrov, Ivan; Jeong, Hyejin; Chapman, Patrick; Kim, Kyekyoon

    2009-03-02

    For optoelectronic applications requiring unconventional substrates, use of flexible forms of semiconductors may be inevitable. We have fabricated a flexible form of single crystalline AlN ribbons with periodic and wavelike structures on an elastomeric substrate. Single crystalline AlN films were grown on Si (111) substrate using high vacuum unbalanced magnetron sputtering. Crystallinity of the AlN films was confirmed with x-ray diffraction and pole figure. The AlN ribbons were transferred to a prestrained (3.1%) elastomeric substrate and the resulting ''wavy'' ribbons on the substrate were flexible up to 30% strain without any crack formation on the surface. As the film thickness changed from 300 to 900 nm, the periods of the waves varied from 95 to 277 {mu}m, which were within a 10% error of the calculated values. When we applied more than 30% strain, mechanical instability, such as the failure of AlN ribbons due to the cracks on the surface and the merged ribbons, was observed.

  6. Secretary Moniz's Remarks on "A Look Back on the Blue Ribbon...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    And all of them have major nuclear responsibilities. So it's something that just cuts ... risks focus on enrichment and reprocessing, for obvious reasons, as pathways to ...

  7. ADVISORY: Blue Ribbon Commission on America's Nuclear Future to Hold 1st

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meeting on Thursday and Friday Secretary Chu Op-Ed on Small Modular Reactors in the Wall Street Journal U.S. Secretary of Energy Steven Chu Washington, D.C. - Today, the Wall Street Journal published an op-ed by U.S. Secretary of Energy Steven Chu on small modular reactors. The op-ed can be found here. The text of the op-ed is below: America's New Nuclear Option Small modular reactors will expand the ways we use atomic power. By Steven Chu Wall Street Journal, March 23, 2010 America is on

  8. Hydrostatic extrusion of Cu-Ag melt spun ribbon

    DOE Patents [OSTI]

    Hill, M.A.; Bingert, J.F.; Bingert, S.A.; Thoma, D.J.

    1998-09-08

    The present invention provides a method of producing high-strength and high-conductance copper and silver materials comprising the steps of combining a predetermined ratio of the copper with the silver to produce a composite material, and melt spinning the composite material to produce a ribbon of copper and silver. The ribbon of copper and silver is heated in a hydrogen atmosphere, and thereafter die pressed into a slug. The slug then is placed into a high-purity copper vessel and the vessel is sealed with an electron beam. The vessel and slug then are extruded into wire form using a cold hydrostatic extrusion process. 5 figs.

  9. Hydrostatic extrusion of Cu-Ag melt spun ribbon

    DOE Patents [OSTI]

    Hill, Mary Ann; Bingert, John F.; Bingert, Sherri A.; Thoma, Dan J.

    1998-01-01

    The present invention provides a method of producing high-strength and high-conductance copper and silver materials comprising the steps of combining a predetermined ratio of the copper with the silver to produce a composite material, and melt spinning the composite material to produce a ribbon of copper and silver. The ribbon of copper and silver is heated in a hydrogen atmosphere, and thereafter die pressed into a slug. The slug then is placed into a high-purity copper vessel and the vessel is sealed with an electron beam. The vessel and slug then are extruded into wire form using a cold hydrostatic extrusion process.

  10. BLUE MOUNTAIN | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BLUE MOUNTAIN BLUE MOUNTAIN DOE-LPO_Project-Posters_GEO_Blue-Mountain.pdf (343.09 KB) More Documents & Publications ORMAT NEVADA GRANITE RELIABLE USG OREGON

  11. Extrusion of metal oxide superconducting wire, tube or ribbon

    DOE Patents [OSTI]

    Dusek, Joseph T. (Lombard, IL)

    1993-01-01

    A process for extruding a superconducting metal oxide composition YBa.sub.2 Cu.sub.3 O.sub.7-x provides a wire (tube or ribbon) having a cohesive mass and a degree of flexibility together with enhanced electrical properties. Wire diameters in the range of 6-85 mils have been produced with smaller wires on the order of 10 mils in diameter exhibiting enhanced flexibility for forming braided, or multistrand, configurations for greater current carrying capacity. The composition for extrusion contains a polymeric binder to provide a cohesive mass to bind the particles together during the extrusion process with the binder subsequently removed at lower temperatures during sintering. The composition for extrusion further includes a deflocculent, an organic plasticizer and a solvent which also are subsequently removed during sintering. Electrically conductive tubing with an inner diameter of 52 mil and an outer diameter of 87-355 mil has also been produced. Flat ribbons have been produced in the range of 10-125 mil thick by 100-500 mil wide. The superconducting wire, tube or ribbon may include an outer ceramic insulating sheath co-extruded with the wire, tubing or ribbon.

  12. Extrusion of metal oxide superconducting wire, tube or ribbon

    DOE Patents [OSTI]

    Dusek, Joseph T.

    1993-10-05

    A process for extruding a superconducting metal oxide composition YBa.sub.2 Cu.sub.3 O.sub.7-x provides a wire (tube or ribbon) having a cohesive mass and a degree of flexibility together with enhanced electrical properties. Wire diameters in the range of 6-85 mils have been produced with smaller wires on the order of 10 mils in diameter exhibiting enhanced flexibility for forming braided, or multistrand, configurations for greater current carrying capacity. The composition for extrusion contains a polymeric binder to provide a cohesive mass to bind the particles together during the extrusion process with the binder subsequently removed at lower temperatures during sintering. The composition for extrusion further includes a deflocculent, an organic plasticizer and a solvent which also are subsequently removed during sintering. Electrically conductive tubing with an inner diameter of 52 mil and an outer diameter of 87-355 mil has also been produced. Flat ribbons have been produced in the range of 10-125 mil thick by 100-500 mil wide. The superconducting wire, tube or ribbon may include an outer ceramic insulating sheath co-extruded with the wire, tubing or ribbon.

  13. SPATIAL RETENTION OF IONS PRODUCING THE IBEX RIBBON

    SciTech Connect (OSTI)

    Schwadron, N. A.; McComas, D. J.

    2013-02-10

    The ribbon observed by the Interstellar Boundary Explorer (IBEX) mission is a narrow, {approx}20 Degree-Sign wide feature that stretches across much of the sky in the global flux of energetic neutral atoms from the outer heliosphere. The ribbon remains an enigma despite its persistence after 3 years of IBEX observations and after almost a dozen theories that attempt to explain it. While each theory that has been posed has its strengths, each one also contradicts IBEX observations or demonstrates significant flaws in internal consistency. Here, we present a new theory that is different than any of the existing ideas and yet accounts for many of the key observations. We argue that the ribbon could be produced by a spatial region in the local interstellar medium where newly ionized atoms are temporarily contained through increased rates of scattering by locally generated waves in the electromagnetic fields. The particles in the ribbon are created predominantly from neutralized solar wind and neutralized pickup ions from inside the solar wind termination shock.

  14. AMO Director Mark Johnson Moderates Panel at American Energy &

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Competitiveness (AEMC) Northeast Regional Summit | Department of Energy Mark Johnson Moderates Panel at American Energy & Manufacturing Competitiveness (AEMC) Northeast Regional Summit AMO Director Mark Johnson Moderates Panel at American Energy & Manufacturing Competitiveness (AEMC) Northeast Regional Summit May 17, 2016 - 1:00pm Addthis From left to right: Moderator Mark Johnson, panelists Dr. Craig Blue, Dean Jones, John Milton-Benoit, Jeffrey Wilcox, and Andy

  15. Compact multiwavelength transmitter module for multimode fiber optic ribbon cable

    DOE Patents [OSTI]

    Deri, Robert J.; Pocha, Michael D.; Larson, Michael C.; Garrett, Henry E.

    2002-01-01

    A compact multiwavelength transmitter module for multimode fiber optic ribbon cable, which couples light from an M.times.N array of emitters onto N fibers, where the M wavelength may be distributed across two or more vertical-cavity surface-emitting laser (VCSEL) chips, and combining emitters and multiplexer into a compact package that is compatible with placement on a printed circuit board. A key feature is bringing together two emitter arrays fabricated on different substrates--each array designed for a different wavelength--into close physical proximity. Another key feature is to compactly and efficiently combine the light from two or more clusters of optical emitters, each in a different wavelength band, into a fiber ribbon.

  16. BlueChoice

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Ambulance: Nonemergency Air Transfer (between facilities) 10% after deductible 4 CancerCongenital Heart Disease Care (Blue distinction programs only include a lodging per...

  17. BlueChoice

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Lodging: Benefits are available when these services are related to case-managed Cancer Services or Congenital Heart Disease if patient is receiving treatment from a Blue...

  18. BlueChoice

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physician and Other Professional Provider Charges ) 10% after In-Network deductible 3 CancerCongenital Heart Disease Care (Blue distinction programs only include a lodging per...

  19. BlueFire Ethanol

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BlueFire Ethanol, Inc. Corporate HQ: Irvine, California Proposed Facility Location: Mecca, ... or Southern California Materials Recovery Facilities to ethanol and other products. ...

  20. Color and shape changing polymeric ribbons and sheets

    DOE Patents [OSTI]

    Stevens, Raymond C.; Cheng, Quan; Song, Jie

    2006-05-23

    The present invention herein provides the design, synthesis and characterization of compositions comprising asymmetric bolaamphiphilic lipids that form extended polymeric ribbons and wide sheets. These compositions may be doped, or interspersed, with various compounds to fine-tune the fluidity and rigidity of the bolaamphiphilic lipid composition, and promote other morphologies of the composition, including fluid vesicles and truncated flat sheets. Upon an increase in pH these compositions undergo a calorimetric and morphological transformation.

  1. Sandia National Laboratories Algae Raceway Testing Facility Ribbon Cutting

    Broader source: Energy.gov [DOE]

    Sandia National Laboratories will be hosting a ribbon cutting on Feb. 4, 2016 at its Livermore Valley Open Campus to commemorate the opening of a new algae raceway testing facility. The new facility will allow researchers to better understand algal cultivation techniques, and is funded in part by the Bioenergy Technologies Office. Advanced Algal Systems Program Manager Alison Goss Eng and Technology Manager Daniel Fishman will be in attendance.

  2. Method and apparatus for drawing monocrystalline ribbon from a melt

    DOE Patents [OSTI]

    Ciszek, Theodore F.; Schwuttke, Guenter H.

    1981-11-10

    A method and apparatus for drawing a monocrystalline ribbon or web from a melt comprising utilizing a shaping die including at least two elements spaced one from the other each having a portion thereof located below the level of the melt and another portion located above the level of the melt a distance sufficient to form a raised meniscus of melt about the corresponding element.

  3. Tunable and angle-insensitive plasmon resonances in graphene ribbon arrays with multispectral diffraction response

    SciTech Connect (OSTI)

    Li, Kangwen; Ma, Xunpeng; Zhang, Zuyin; Xu, Yun, E-mail: xuyun@semi.ac.cn; Song, Guofeng [Institute of Semiconductors, Chinese Academy of Sciences, Beijing (China)

    2014-03-14

    Plasmon resonances in graphene ribbon arrays are investigated numerically by means of the Finite Element Method. Numerical analysis shows that a series of multipolar resonances take place when graphene ribbon arrays are illuminated by a TM polarized electromagnetic wave. Moreover, these resonances are angle-independent, and can be tuned greatly by the width and the doping level of the graphene ribbons. Specifically, we demonstrate that for graphene arrays with several sets of graphene ribbons, which have different widths or doping levels, each of these multipolar resonances will be split into several ones. In addition, as plasmon resonances can confine electromagnetic field at the ribbon edges, graphene ribbons with different widths or doping levels offer intriguing application for electrically tunable spectral imaging.

  4. Method of making patterned helical metallic ribbon for continuous edge winding applications

    DOE Patents [OSTI]

    Liebermann, Howard H.; Frischmann, Peter G.; Rosenberry, Jr., George M.

    1982-08-10

    Metallic ribbon having cutout patterns therein is fabricated in continuous helical form by directing a melt stream or jet onto a rapidly moving patterned substrate surface.

  5. Method of making patterned helical metallic ribbon for continuous edge winding applications

    DOE Patents [OSTI]

    Liebermann, H.H.; Frischmann, P.G.; Rosenberry, G.M. Jr.

    1982-08-10

    Metallic ribbon having cutout patterns therein is fabricated in continuous helical form by directing a melt stream or jet onto a rapidly moving patterned substrate surface. 10 figs.

  6. Blue Summit | Open Energy Information

    Open Energy Info (EERE)

    Summit Jump to: navigation, search Name Blue Summit Facility Blue Summit Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy...

  7. Proposal Study Panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Study Panels Print Two Proposal Study Panels (PSPs) exist at the ALS: one for the general sciences and one for structural biology. The role of the PSPs is desribed in User Policy. Note: Users are urged NOT to contact any members of the panels directly. Current members of the general sciences PSP, as of April 2016, are Masa Fukuto, Brookhaven National Laboratory Carol Hirschmugl, University of Wisconsin, Milwaukee Peter Johnson (chair), Brookhaven National Laboratory Apurva Mehta, SLAC

  8. Proposal Study Panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Study Panels Print Two Proposal Study Panels (PSPs) exist at the ALS: one for the general sciences and one for structural biology. The role of the PSPs is desribed in User Policy. Note: Users are urged NOT to contact any members of the panels directly. Current members of the general sciences PSP, as of April 2016, are Masa Fukuto, Brookhaven National Laboratory Carol Hirschmugl, University of Wisconsin, Milwaukee Peter Johnson (chair), Brookhaven National Laboratory Apurva Mehta, SLAC

  9. Proposal Study Panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Study Panels Print Two Proposal Study Panels (PSPs) exist at the ALS: one for the general sciences and one for structural biology. The role of the PSPs is desribed in User Policy. Note: Users are urged NOT to contact any members of the panels directly. Current members of the general sciences PSP, as of April 2016, are Masa Fukuto, Brookhaven National Laboratory Carol Hirschmugl, University of Wisconsin, Milwaukee Peter Johnson (chair), Brookhaven National Laboratory Apurva Mehta, SLAC

  10. Proposal Study Panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Study Panels Print Two Proposal Study Panels (PSPs) exist at the ALS: one for the general sciences and one for structural biology. The role of the PSPs is desribed in User Policy. Note: Users are urged NOT to contact any members of the panels directly. Current members of the general sciences PSP, as of April 2016, are Masa Fukuto, Brookhaven National Laboratory Carol Hirschmugl, University of Wisconsin, Milwaukee Peter Johnson (chair), Brookhaven National Laboratory Apurva Mehta, SLAC

  11. Solar reflection panels

    DOE Patents [OSTI]

    Diver, Jr., Richard B.; Grossman, James W.; Reshetnik, Michael

    2006-07-18

    A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

  12. Hydrogen Safety Panel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    or otherwise restricted information. Project ID: scs07weiner PNNL-SA-65397 2 IEA HIA Task 19 Working Group Hydrogen Safety Training Props Hydrogen Safety Panel Incident...

  13. Spatial confinement of the IBEX Ribbon: A dominant turbulence mechanism

    SciTech Connect (OSTI)

    Isenberg, Philip A.

    2014-05-20

    The narrow ribbon of enhanced energetic neutral atom flux observed by the Interstellar Boundary Explorer spacecraft has prompted numerous ideas to explain its structure and properties. One of these ideas is the 'neutral solar wind' scenario, which identifies the source particles as pickup protons in the local interstellar medium originating in solar wind charge-exchange interactions. This scenario has been thought to require unrealistically weak pitch-angle scattering of the pickup protons to explain the narrow structure. Recently, Schwadron and McComas suggested that this structure could result from a spatial retention of the pickup protons, rather than from a restricted pitch-angle distribution. Here, we present a physically motivated, quantitative mechanism to produce such a spatial configuration. This mechanism is based on the 'dominant turbulence' assumption, which can be applied where the production of new pickup protons is slow, and has been used to successfully explain the level of turbulent heating observed in the outer solar wind. This formalism predicts a pickup isotropization process which adds or subtracts energy from the ambient turbulent fluctuations, depending on the initial pitch angle of the pickup protons. We show that a simple model of this process can yield a ribbon structure in qualitative agreement with the observations. The results of this simple model are not yet quantitatively satisfactory, but we suggest several improvements which may reduce the quantitative discrepancy.

  14. Technical Review Panel Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TRP Report v7, 12 Aug 2012 TRP Report Final December 2012 Advanced Reactor Concepts Technical Review Panel Report Evaluation and Identification of future R&D on eight Advanced Reactor Concepts, conducted April - September 2012 December 2012 Public release version 2 Public release version 3 Table of Contents Summary ................................................................................................................................... 4 1. Overview of the Technical Review Panel

  15. Solar control panel

    SciTech Connect (OSTI)

    Hoyois, J.C.

    1984-12-11

    A glazing panel for transmitting radiant energy including visible light energy which includes first and second glass sheets supported in spaced relation. The first glass sheet has an oxide coated surface which defines an exterior surface of the panel and a gold coating on the surface which faces the second glass sheet.

  16. Solar heating panel

    SciTech Connect (OSTI)

    Keefe, R.A.

    1983-08-09

    A method of maintaining the temperature of a solar heating panel with glazing below about 220/sup 0/ utilizes convention cooling, where it is essential to the success of the method that the glazing be at least two inches above the upper surface of the collector. A panel of unitary construction of essentially the same plastic material which is an embodiment of the method can withstand the normal operating conditions to which such panels are subjected without thermal degradation of the plastic nor danger of rupture attending loss of physical integrity at excessive temperatures.

  17. Greening of Blue Mountain

    SciTech Connect (OSTI)

    Sopper, W.E. ); McMahon, J.M. III )

    1987-04-01

    This article describes the revegetation of Blue Mountain in Palmertown, Pennsylvania, which was biologically destroyed by a zinc smelting operation. After application of industrial fly ash and a municipal sludge mixture, grasses and microbes and some tree seedlings are present. The article outlines in detail the processes of testing and experimentation with the soils and the plants.

  18. Solar collector panel

    SciTech Connect (OSTI)

    Gessford, J.D.

    1983-03-01

    A solar collector panel and a method of making the collector panel. The solar collector panel has four layers of fiberglass mat which are each saturated with a catalyzed liquiform resin. Between the first two layers, unimpregnated kraft honeycomb paper having an open cellular structure is placed so as to form a resinated honeycomb core between these first two layers. A plurality of fluid channels are then bonded to the second layer of resin saturated fiberglass mat. The fluid channels are made of a material having a coefficient of thermal expansion essentially equal to that of the fiberglass mat. The third layer of resinsaturated fiberglass mat is placed over the fluid channels. A second layer of kraft honeycomb paper is then placed between the third and fourth layers of resin-saturated fiberglass mat, and a clear gel coat mixed with an ultraviolet inhibitor solution is rolled out over the top of the solar collector panel to partially screen out ultraviolet rays.

  19. Residential Photovoltaic Solar Panels

    Office of Energy Efficiency and Renewable Energy (EERE)

    This b-roll footage shows exteriors of two Colorado residences that use photovoltaic panels to collect renewable solar energy, thereby reducing their dependence on external electric power. Net...

  20. Gas filled panel insulation

    DOE Patents [OSTI]

    Griffith, B.T.; Arasteh, D.K.; Selkowitz, S.E.

    1993-12-14

    A structural or flexible highly insulative panel which may be translucent, is formed from multi-layer polymeric material in the form of an envelope surrounding a baffle. The baffle is designed so as to minimize heat transfer across the panel, by using material which forms substantially closed spaces to suppress convection of the low conductivity gas fill. At least a portion of the baffle carries a low emissivity surface for suppression of infrared radiation. 18 figures.

  1. Gas filled panel insulation

    DOE Patents [OSTI]

    Griffith, Brent T.; Arasteh, Dariush K.; Selkowitz, Stephen E.

    1993-01-01

    A structural or flexible highly insulative panel which may be translucent, is formed from multi-layer polymeric material in the form of an envelope surrounding a baffle. The baffle is designed so as to minimize heat transfer across the panel, by using material which forms substantially closed spaces to suppress convection of the low conductivity gas fill. At least a portion of the baffle carries a low emissivity surface for suppression of infrared radiation.

  2. Hexagon solar power panel

    DOE Patents [OSTI]

    Rubin, Irwin

    1978-01-01

    A solar energy panel comprises a support upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

  3. Blue Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Redirected from Blue Mountain Area) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Blue Mountain Geothermal Area Contents 1 Area...

  4. Blue Star Energy Services | Open Energy Information

    Open Energy Info (EERE)

    Blue Star Energy Services (Redirected from BlueStar) Jump to: navigation, search Name: Blue Star Energy Services Place: Illinois Phone Number: 866-258-3782 Website:...

  5. Add Blue | Open Energy Information

    Open Energy Info (EERE)

    Add Blue Jump to: navigation, search Name: Add Blue Place: Sao Paulo, Sao Paulo, Brazil Zip: 04621-000 Product: Company is tailoring US company KL Energy's enzymatic process...

  6. BlueCross BlueShield International Claim Form | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BlueCross BlueShield International Claim Form PDF icon BCBSIL International Claim Form 2015

  7. IBEX satellite finds ribbon-like structure at edge of heliosphere

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IBEX satellite finds ribbon-like structure at edge of heliosphere The NASA IBEX mission ... Using the High Energy Neutral Atom Imager, led by Los Alamos National Laboratory, the NASA ...

  8. THz near-field microscopy of graphene nano-ribbon arrays. (Conference...

    Office of Scientific and Technical Information (OSTI)

    Title: THz near-field microscopy of graphene nano-ribbon arrays. Authors: Pan, Wei ; Brener, Igal ; Mitrofanov, O. ; Thompson, R ; Yu, W. ; berger, c ; de heer, w.a. ; Jiang, Z. ...

  9. Growing Graphene Ribbons in One Direction | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Growing Graphene Ribbons in One Direction Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory Committee (BESAC) Community Resources Contact Information Basic Energy Sciences U.S. Department of Energy SC-22/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3081 F: (301) 903-6594 E: Email Us More Information » 06.07.16 Growing Graphene Ribbons in One Direction New

  10. DOE, State Officials Cut Ribbon for New WIPP Emergency Operations Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 7, 2016 DOE, State Officials Cut Ribbon for New WIPP Emergency Operations Center New Mexico Governor Susana Martinez joined U.S. Department of Energy (DOE) officials for a ribbon cutting ceremony to mark the completion of a new state-of-the- art Emergency Operations Center (EOC) located in Carlsbad, NM. "We're pleased to share this accomplishment with Governor Martinez and other state and community leaders," said Mark Whitney, DOE's Principal Deputy Assistant Secretary for

  11. Under Secretary Klotz delivers remarks at PREP ribbon-cutting | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Under Secretary Klotz delivers remarks at PREP ribbon-cutting Wednesday, June 18, 2014 - 1:23pm Under Secretary Klotz delivered remarks at the Pantex Renewable Energy Project (PREP) ribbon-cutting this week. PREP establishes the largest federally-owned wind farm in the country and will generate approximately 47 million kilowatt-hours of electricity annually, more than 60 percent of the electricity needed for Pantex. The project will reduce CO2

  12. SEPARATION OF THE RIBBON FROM GLOBALLY DISTRIBUTED ENERGETIC NEUTRAL ATOM FLUX USING THE FIRST FIVE YEARS OF IBEX OBSERVATIONS

    SciTech Connect (OSTI)

    Schwadron, N. A.; Moebius, E.; Kucharek, H.; Lee, M. A.; Fairchild, K.; Fuselier, S. A.; McComas, D. J.; Allegrini, F.; Dayeh, M.; Livadiotis, G.; Reno, M.; Funsten, H. O.; Janzen, P.; Reisenfeld, D.; Bzowski, M.; Sokół, J. M.; Kubiak, M. A.; Christian, E. R.; DeMajistre, R.; Frisch, P.; and others

    2014-11-01

    The Interstellar Boundary Explorer (IBEX) observes the IBEX ribbon, which stretches across much of the sky observed in energetic neutral atoms (ENAs). The ribbon covers a narrow (∼20°-50°) region that is believed to be roughly perpendicular to the interstellar magnetic field. Superimposed on the IBEX ribbon is the globally distributed flux that is controlled by the processes and properties of the heliosheath. This is a second study that utilizes a previously developed technique to separate ENA emissions in the ribbon from the globally distributed flux. A transparency mask is applied over the ribbon and regions of high emissions. We then solve for the globally distributed flux using an interpolation scheme. Previously, ribbon separation techniques were applied to the first year of IBEX-Hi data at and above 0.71 keV. Here we extend the separation analysis down to 0.2 keV and to five years of IBEX data enabling first maps of the ribbon and the globally distributed flux across the full sky of ENA emissions. Our analysis shows the broadening of the ribbon peak at energies below 0.71 keV and demonstrates the apparent deformation of the ribbon in the nose and heliotail. We show global asymmetries of the heliosheath, including both deflection of the heliotail and differing widths of the lobes, in context of the direction, draping, and compression of the heliospheric magnetic field. We discuss implications of the ribbon maps for the wide array of concepts that attempt to explain the ribbon's origin. Thus, we present the five-year separation of the IBEX ribbon from the globally distributed flux in preparation for a formal IBEX data release of ribbon and globally distributed flux maps to the heliophysics community.

  13. Oven wall panel construction

    DOE Patents [OSTI]

    Ellison, Kenneth; Whike, Alan S.

    1980-04-22

    An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

  14. Advanced solar panel designs

    SciTech Connect (OSTI)

    Ralph, E.L.; Linder, E.

    1995-10-01

    This paper describes solar cell panel designs that utilize new high efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

  15. Panel 3 - characterization

    SciTech Connect (OSTI)

    Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu; Feldman, A.; Glass, J.T.; Kleimer, R.; Lawton, E.A.

    1993-01-01

    The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

  16. Nuclear Nonproliferation and Arms Control Primer Prepared for the Blue Ribbon Commission on America’s Nuclear Future

    SciTech Connect (OSTI)

    Williams, Laura S.

    2011-05-25

    To provide a brief overview of key arms control and nonproliferation arrangements for the layperson that may be relevant to the Commission's comprehensive review of policies for managing the back end of the nuclear fuel cycle. Primer would be published by the Commission and made publicly available, probably as an appendix to a larger Commission report.

  17. Industry Partners Panel

    Office of Energy Efficiency and Renewable Energy (EERE)

    Industry Panel presenters include: Michael G. Andrew, Director - Academic and Technical Programs, Advanced Products and Materials, Johnson Controls Power Solutions Michael A. Fetcenko, Vice President and Managing Director, BASF Battery Materials – Ovonic, BASF Corporation Adam Kahn, Founder and CEO, AKHAN Technologies, Inc. Stephen E. Zimmer, Executive Director, United States Council for Automotive Research (USCAR)

  18. Solar water heating panel

    SciTech Connect (OSTI)

    Burke, B.G.

    1984-10-02

    The present invention discloses a solar water heating panel and method of constructing such a solar panel from a pair of thin sheets bonded together around their peripheral edges and having at least one of the sheets formed with resiliently flexible areas defined by a plurality of abutting concave hexagonal areas or zones. The center of each hexagonal zone is formed as a dimple, concave with respect to the opposite sheet, whose radius of curvature is greater than the radius of an inscribed circle within said zone. The abutting zones between each hexagonal zone are formed convex relative to the opposite sheet and have a radius less than that of an inscribed circle. In a preferred form, the sheets are joined together at the center of alternate spaced-apart hexagonal areas. In this way, except for the centers bonded near the panel edges, each joined hexagonal center is surrounded by six unjoined areas to form both transverse and longitudinal flow passages through the panel.

  19. Solar heating panel

    SciTech Connect (OSTI)

    Ellsworth, R.L.

    1983-01-18

    A solar heating panel for collecting solar heat energy and method for making same having a heat insulative substrate with a multiplicity of grooves and structural supporting ribs formed therein covered by a thin, flexible heat conductive film to form fluid conducting channels which in turn are connected to manifolds from which fluid is directed into the channels and heated fluid is removed therefrom.

  20. Stepped inlet optical panel

    DOE Patents [OSTI]

    Veligdan, James T.

    2001-01-01

    An optical panel includes stacked optical waveguides having stepped inlet facets collectively defining an inlet face for receiving image light, and having beveled outlet faces collectively defining a display screen for displaying the image light channeled through the waveguides by internal reflection.

  1. Solar Panels Plus LLC | Open Energy Information

    Open Energy Info (EERE)

    Panels Plus LLC Jump to: navigation, search Name: Solar Panels Plus LLC Place: Chesapeake, Virginia Zip: 23320 Sector: Solar Product: Solar Panels Plus LLC distributes solar energy...

  2. Heat transfer panel and method

    SciTech Connect (OSTI)

    Clark, P.C.

    1984-09-25

    A durable, low-cost, heat transfer panel of the type typically employed as a solar energy collector is disclosed. The panel includes a flow channel defining structure, preferably formed as a corrugated sheet and a superimposed flexible membrane, to which manifolds or headers are secured. The manifolds have mating corrugated surfaces that are interengaged with the corrugations on the panel sheet to provide transverse rigidity to the overall panel structure as well as distribution of heat transfer fluid to and from the panel. Modified forms of the panel are disclosed in which the panel includes a selective absorber and a venting structure. A method for blow-molding the manifold into mating interengagement with the corrugated support sheet of the panel is also disclosed.

  3. Linking Transformational Materials and Processing for an Energy-Efficient and Low-Carbon Economy, 2010

    SciTech Connect (OSTI)

    Hunt, Warren H.; Brindle, Ross; James, Mallory; Justiniano, Mauricio; Sabouni, Ridah; Seader, Melanie; Ruch, Jennifer; Andres, Howard; Zafar, Muhammad

    2010-06-01

    The Energy Materials Blue Ribbon Panel, representing experts from industry, academia, and government, identifies new materials and processing breakthroughs that could lead to transformational advances in energy efficiency, energy security, and carbon reduction.

  4. Solar collector panel

    SciTech Connect (OSTI)

    Gessford, J.D.

    1980-11-11

    A solar collector panel and method of making same are disclosed. The solar collector panel has four layers of fiberglass mat which are each saturated with a catalyzed liquiform resin. Between the first two layers, unimpregnated kraft honeycomb paper having an open cellular structure is placed so as to form a resinated honeycomb core between these first two layers. A black gel coat is sprayed onto the second layer of resin-saturated fiberglass mat and a plurality of copper tubes are then placed onto the black gel coat so as to be bonded in heat-transfer relation thereto. The third layer of resin-saturated fiberglass mat is draped over the copper tubes so as to insulate them. A second layer of kraft honeycomb paper is then placed between the third and forth layers of resin-saturated fiberglass mat, and a clear gel coat mixed with an ultraviolet inhibitor solution is rolled out over the top of the solar collector panel to partially screen out ultraviolet rays.

  5. Evaluation of Dynamic Mechanical Loading as an Accelerated Test Method for Ribbon Fatigue: Preprint

    SciTech Connect (OSTI)

    Bosco, N.; Silverman, T. J.; Wohlgemuth, J.; Kurtz, S.; Inoue, M.; Sakurai, K.; Shinoda, T.; Zenkoh, H.; Hirota, K.; Miyashita, M.; Tadanori, T.; Suzuki, S.

    2015-04-07

    Dynamic Mechanical Loading (DML) of photovoltaic modules is explored as a route to quickly fatigue copper interconnect ribbons. Results indicate that most of the interconnect ribbons may be strained through module mechanical loading to a level that will result in failure in a few hundred to thousands of cycles. Considering the speed at which DML may be applied, this translates into a few hours o testing. To evaluate the equivalence of DML to thermal cycling, parallel tests were conducted with thermal cycling. Preliminary analysis suggests that one +/-1 kPa DML cycle is roughly equivalent to one standard accelerated thermal cycle and approximately 175 of these cycles are equivalent to a 25-year exposure in Golden Colorado for the mechanism of module ribbon fatigue.

  6. Blue Cross Blue Shield of Illinois PPO Claim Form | Argonne National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Blue Cross Blue Shield of Illinois PPO Claim Form PDF icon BCBSIL PPO Claim Form

  7. Blue Valley Energy | Open Energy Information

    Open Energy Info (EERE)

    References: Blue Valley Energy Web Site1 On Jan 1st 2008, Valley Geothermal and Blue Sky Energy Solutions merged to form Blue Valley Energy LLC. Valley Geothermal, led by Monte...

  8. Photovoltaic panel clamp

    DOE Patents [OSTI]

    Mittan, Margaret Birmingham; Miros, Robert H. J.; Brown, Malcolm P.; Stancel, Robert

    2012-06-05

    A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

  9. Photovoltaic panel clamp

    DOE Patents [OSTI]

    Brown, Malcolm P.; Mittan, Margaret Birmingham; Miros, Robert H. J.; Stancel, Robert

    2013-03-19

    A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

  10. Concentrating photovoltaic solar panel

    DOE Patents [OSTI]

    Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

    2014-04-15

    The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

  11. BlueFire Ethanol | Open Energy Information

    Open Energy Info (EERE)

    BlueFire Ethanol Jump to: navigation, search Name: BlueFire Ethanol Place: Irvine, California Zip: 92618 Sector: Hydro Product: US biofuel producer that utilises a patented...

  12. Blue Sun Biodiesel LLC | Open Energy Information

    Open Energy Info (EERE)

    Biodiesel LLC Jump to: navigation, search Logo: Blue Sun Energy, Inc. Name: Blue Sun Energy, Inc. Address: 14143 Denver West Parkway Place: Golden, Colorado Zip: 80401 Region:...

  13. Blue Sun Biodiesel | Open Energy Information

    Open Energy Info (EERE)

    Sun Biodiesel Jump to: navigation, search Name: Blue Sun Biodiesel Place: Fort Collins, Colorado Zip: 80525 Product: Privately held Blue Sun Biodiesel is a breakthrough agriculture...

  14. Blue Lake Power | Open Energy Information

    Open Energy Info (EERE)

    Power Jump to: navigation, search Name: Blue Lake Power Place: Redding, California Zip: 96001 Sector: Renewable Energy Product: Blue Lake Power is a wholey owned subsidiary of...

  15. Pacific Blue Energy | Open Energy Information

    Open Energy Info (EERE)

    Blue Energy Jump to: navigation, search Name: Pacific Blue Energy Place: Flagstaff, Arizona Zip: 86001 Sector: Solar Product: Arizona-based solar project developer. Coordinates:...

  16. Blue Creek Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Creek Wind Farm Jump to: navigation, search Name Blue Creek Wind Farm Facility Blue Creek Wind Farm Sector Wind energy Facility Type Commercial Scale Wind Facility Status In...

  17. Blue Sphere Corp | Open Energy Information

    Open Energy Info (EERE)

    Sphere Corp Jump to: navigation, search Name: Blue Sphere Corp Place: London, United Kingdom Product: London-based emission reduction project integrator. References: Blue Sphere...

  18. Summit Blue Consulting | Open Energy Information

    Open Energy Info (EERE)

    Summit Blue Consulting Jump to: navigation, search Name: Summit Blue Consulting Place: Boulder, Colorado Zip: 80302 Sector: Efficiency, Renewable Energy Product: String...

  19. Blue Hill Partners LLC | Open Energy Information

    Open Energy Info (EERE)

    Partners LLC Jump to: navigation, search Logo: Blue Hill Partners LLC Name: Blue Hill Partners LLC Address: 40 W. Evergreen Ave. Place: Philadelphia, Pennsylvania Zip: 19118...

  20. BlueFire Ethanol | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BlueFire Ethanol BlueFire Ethanol Construct and operate a facility that converts green waste and lignocellulosic fractions diverted from landfills or Southern California Materials ...

  1. Blue Sky Optimum Energy | Open Energy Information

    Open Energy Info (EERE)

    Optimum Energy Jump to: navigation, search Name: Blue Sky Optimum Energy Place: Buffalo, New York Product: Blue Sky offers a processing system to produce biodiesel at a cheaper...

  2. Blue Ridge Biofuels LLC | Open Energy Information

    Open Energy Info (EERE)

    Biofuels LLC Jump to: navigation, search Name: Blue Ridge Biofuels LLC Place: Asheville, North Carolina Zip: 28801 Sector: Biofuels Product: Blue Ridge Biofuels is a worker...

  3. Blue Diamond Ventures Inc | Open Energy Information

    Open Energy Info (EERE)

    Name: Blue Diamond Ventures Inc Place: Houston,, Texas Zip: 77071 Product: Agriculture, bio fuels and commercial development company. References: Blue Diamond Ventures Inc1 This...

  4. Blue Oak Energy Inc | Open Energy Information

    Open Energy Info (EERE)

    Blue Oak Energy Inc Jump to: navigation, search Name: Blue Oak Energy Inc Place: Davis,, California Zip: 95618 Sector: Services Product: Focused on PV system design, planning,...

  5. Microgap flat panel display

    DOE Patents [OSTI]

    Wuest, Craig R.

    1998-01-01

    A microgap flat panel display which includes a thin gas-filled display tube that utilizes switched X-Y "pixel" strips to trigger electron avalanches and activate a phosphor at a given location on a display screen. The panel utilizes the principal of electron multiplication in a gas subjected to a high electric field to provide sufficient electron current to activate standard luminescent phosphors located on an anode. The X-Y conductive strips of a few micron widths may for example, be deposited on opposite sides of a thin insulating substrate, or on one side of the adjacent substrates and function as a cathode. The X-Y strips are separated from the anode by a gap filled with a suitable gas. Electrical bias is selectively switched onto X and Y strips to activate a "pixel" in the region where these strips overlap. A small amount of a long-lived radioisotope is used to initiate an electron avalanche in the overlap region when bias is applied. The avalanche travels through the gas filled gap and activates a luminescent phosphor of a selected color. The bias is adjusted to give a proportional electron multiplication to control brightness for given pixel.

  6. Microgap flat panel display

    DOE Patents [OSTI]

    Wuest, C.R.

    1998-12-08

    A microgap flat panel display is disclosed which includes a thin gas-filled display tube that utilizes switched X-Y ``pixel`` strips to trigger electron avalanches and activate a phosphor at a given location on a display screen. The panel utilizes the principal of electron multiplication in a gas subjected to a high electric field to provide sufficient electron current to activate standard luminescent phosphors located on an anode. The X-Y conductive strips of a few micron widths may for example, be deposited on opposite sides of a thin insulating substrate, or on one side of the adjacent substrates and function as a cathode. The X-Y strips are separated from the anode by a gap filled with a suitable gas. Electrical bias is selectively switched onto X and Y strips to activate a ``pixel`` in the region where these strips overlap. A small amount of a long-lived radioisotope is used to initiate an electron avalanche in the overlap region when bias is applied. The avalanche travels through the gas filled gap and activates a luminescent phosphor of a selected color. The bias is adjusted to give a proportional electron multiplication to control brightness for given pixel. 6 figs.

  7. Thermal insulations using vacuum panels

    DOE Patents [OSTI]

    Glicksman, Leon R.; Burke, Melissa S.

    1991-07-16

    Thermal insulation vacuum panels are formed of an inner core of compressed low thermal conductivity powders enclosed by a ceramic/glass envelope evaluated to a low pressure.

  8. WIPP_Panel_7_Approved

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Panel 7 Certified and Ready for Waste Disposal CARLSBAD, N.M., August 1, 2013 - In mid-July 2013, the New Mexico Environment Department (NMED) approved the use of Panel 7 for disposal of defense- related transuranic (TRU) waste at the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP). Approval by NMED for each underground waste disposal panel prior to use is required under the WIPP Hazardous Waste Facility Permit (Permit). A panel consists of seven waste disposal rooms and each room

  9. Blue Ng | Open Energy Information

    Open Energy Info (EERE)

    Ng Jump to: navigation, search Name: Blue-Ng Place: Bath, United Kingdom Zip: BA1 1SR Sector: Biomass Product: UK-based company that constructs and operates combined heat and...

  10. Blue Energy | Open Energy Information

    Open Energy Info (EERE)

    Blue Energy Address: Box 29068 1950 West Broadway Place: Vancouver Zip: V6J 1Z0 Region: Canada Sector: Marine and Hydrokinetic Phone Number: 604-682-2583 Website: www.bluenergy.com...

  11. Blue Ridge EMC- Net Metering

    Broader source: Energy.gov [DOE]

    The Blue Ridge Electric Membership Corporation offers net metering to its residential customers with solar photovoltaic, wind, or micro-hydro generators up to 25 kilowatts. There is no aggregate...

  12. Solar heating panel arrangement

    SciTech Connect (OSTI)

    Chang, M.K.

    1983-07-12

    A solar heating panel arrangement and method are disclosed wherein a plurality of spherical lenses transmit and focus solar radiation onto the upper surface of a fluid passage for various relative positions of the sun. The upper surface of the passage is in heat transfer proximity to the fluid therein, causing solar radiation focused thereon to be transferred to the fluid in the form of heat. Solar radiation not directly incident on the lenses may be reflected onto them to increase the amount of solar energy available for transfer to the fluid. A supplementary insulating flow of fluid may also be provided above the passage to absorb heat passing upwardly therefrom and retain the heat within the system.

  13. 2015 Blue Advantage HMO Summary | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Blue Advantage HMO Summary PDF icon 2015 BlueAdvantage HMO Summary

  14. Built-in solar panel

    SciTech Connect (OSTI)

    Aloi, M.J.; Hancock, K.J.

    1981-06-16

    Disclosed herein is a solar panel assembly and method for fabrication of same. A portion of the rafters and roof sheeting is cut away to provide an orifice of suitable dimension within which a solar panel frame is to be disposed. A step portion is provided on an upper inner periphery thereof, and a frame lower portion is disposed upon the step. Conduits extend through the solar panel frame at upper and lower portions thereof in a substantially horizontal direction. These conduits are interconnected with a tubed collector plate. An insulative layer is provided underneath this tubed plate. A transparent panel is placed on top of the frame lower portion, and overlying the panel with a frame upper portion which connects the solar panel frame and the frame lower portion by suitable fasteners. Appropriate weather stripping is deployed between the frame upper portion and the solar panel frame, and the open area that exists between the solar panel frame and the roof is provided with a flashing so as to complete the sealing arrangement.

  15. Built-in solar panel

    SciTech Connect (OSTI)

    Aloi, M.J.; Hancock, K.J. II

    1983-07-12

    Disclosed herein is a solar panel assembly and method for fabrication of same including cutting away a portion of the rafters and roof sheeting to provide an orifice of suitable dimension within which a solar panel frame is to be disposed, providing a step portion on an upper inner periphery thereof, disposing a frame lower portion upon the step, installing conduits extending through the solar panel frame at upper and lower portions thereof in a substantially horizontal direction, interconnecting these conduits with a tubed collector plate, providing an insulative layer underneath this tubed plate, placing a transparent panel on top of the frame lower portion, and overlying the panel with a frame upper portion which connects the solar panel frame and the frame lower portion by suitable fasteners. Appropriate weather stripping is deployed between the frame upper portion and the solar panel frame, and the open area that exists between the solar panel frame and the roof is provided with a flashing so as to complete the sealing arrangement.

  16. A theoretical study of blue phosphorene nanoribbons based on first-principles calculations

    SciTech Connect (OSTI)

    Xie, Jiafeng; Si, M. S. Yang, D. Z.; Zhang, Z. Y.; Xue, D. S.

    2014-08-21

    Based on first-principles calculations, we present a quantum confinement mechanism for the band gaps of blue phosphorene nanoribbons (BPNRs) as a function of their widths. The BPNRs considered have either armchair or zigzag shaped edges on both sides with hydrogen saturation. Both the two types of nanoribbons are shown to be indirect semiconductors. An enhanced energy gap of around 1?eV can be realized when the ribbon's width decreases to ?10?. The underlying physics is ascribed to the quantum confinement effect. More importantly, the parameters to describe quantum confinement are obtained by fitting the calculated band gaps with respect to their widths. The results show that the quantum confinement in armchair nanoribbons is stronger than that in zigzag ones. This study provides an efficient approach to tune the band gap in BPNRs.

  17. MODIFICATIONS TO THE WIPP PANEL CLOSURE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... in Panel 4 than in Panel 3. Please compare the waste inventories in Panels 3 and 4 ... to WIPP." This category consists of high-wattage (i.e., high decay heat) payload ...

  18. Panelized wall system with foam core insulation

    SciTech Connect (OSTI)

    Kosny, Jan; Gaskin, Sally

    2009-10-20

    A wall system includes a plurality of wall members, the wall members having a first metal panel, a second metal panel, and an insulating core between the first panel and the second panel. At least one of the first panel and the second panel include ridge portions. The insulating core can be a foam, such as a polyurethane foam. The foam can include at least one opacifier to improve the k-factor of the foam.

  19. Designation Memo: Federal Technical Capability Panel Chairperson...

    Energy Savers [EERE]

    Federal Technical Capability Panel Chairperson Designation Memo: Federal Technical Capability Panel Chairperson May 4, 2007, the Deputy Secretary memorandum designating Karen ...

  20. Blue-green upconversion laser

    DOE Patents [OSTI]

    Nguyen, D.C.; Faulkner, G.E.

    1990-08-14

    A blue-green laser (450--550 nm) uses a host crystal doped with Tm[sup 3+]. The Tm[sup 3+] is excited through upconversion by a red pumping laser and an IR pumping laser to a state which transitions to a relatively lower energy level through emissions in the blue-green band, e.g., 450.20 nm at 75 K. The exciting laser may be tunable dye lasers or may be solid-state semiconductor laser, e.g., GaAlAs and InGaAlP. 3 figs.

  1. Blue-green upconversion laser

    DOE Patents [OSTI]

    Nguyen, Dinh C.; Faulkner, George E.

    1990-01-01

    A blue-green laser (450-550 nm) uses a host crystal doped with Tm.sup.3+. The Tm.sup.+ is excited through upconversion by a red pumping laser and an IR pumping laser to a state which transitions to a relatively lower energy level through emissions in the blue-green band, e.g., 450.20 nm at 75 K. The exciting laser may be tunable dye lasers or may be solid-state semiconductor laser, e.g., GaAlAs and InGaAlP.

  2. Blue light emitting thiogallate phosphor

    DOE Patents [OSTI]

    Dye, Robert C.; Smith, David C.; King, Christopher N.; Tuenge, Richard T.

    1998-01-01

    A crystalline blue emitting thiogallate phosphor of the formula RGa.sub.2 S.sub.4 :Ce.sub.x where R is selected from the group consisting of calcium, strontium, barium and zinc, and x is from about 1 to 10 atomic percent, the phosphor characterized as having a crystalline microstructure on the size order of from about 100 .ANG. to about 10,000 .ANG. is provided together with a process of preparing a crystalline blue emitting thiogallate phosphor by depositing on a substrate by CVD and resultant thin film electroluminescent devices including a layer of such deposited phosphor on an ordinary glass substrate.

  3. Solar panel and method of manufacturing a solar panel

    SciTech Connect (OSTI)

    Duchateau, J.; Nicolas, M.

    1982-05-25

    A solar panel comprising at least one solar energy transducer laminated between a transparent vitreous sheet and a second sheet in which the transducer is imbedded in a layer of transparent polymeric material which bonds the sheets together. The polymeric material comprises an acrylic compound. A method of making the aforesaid solar panel in which the acrylic compound is allowed to set in situ is described.

  4. Laser Assisted Crystallization of Ferromagnetic Amorphous Ribbons: A Multimodal Characterization and Thermal Model Study

    SciTech Connect (OSTI)

    Katakam, Shravana K.; Devaraj, Arun; Bowden, Mark E.; Santhanakrishnan, S.; Smith, Casey; Ramanujan, Raju; Thevuthasan, Suntharampillai; Banerjee, Rajarshi; Dahotre, Narendra B.

    2013-11-14

    This paper focuses on laser-based de-vitrification of amorphous soft magnetic Fe-Si-B ribbons and its consequent influence on the magnetic properties. Laser processing resulted in a finer scale of crystallites due to rapid heating and cooling during laser annealing compared to conventional furnace annealing process. A significant increase in saturation magnetization is observed for laser-annealed ribbons compared to both as-received and furnace annealed samples coupled with an increase in coercivity compared to as received sample. The combined effect of thermal histories and stresses developed during laser annealing results in the formation of nano-crystalline phase along the laser track. The phase evolution is traced with the aid of micro-XRD and TEM analysis. The solute partitioning and compositional variation within the phases are obtained by Local Electrode Atom probe analysis. The evolution of microstructure is rationalized using a Finite Element based heat transfer multi-physics model.

  5. Deep Blue No.1-A Slimhole Geothermal Discovery At Blue Mountain...

    Open Energy Info (EERE)

    Area (Fairbank & Niggemann, 2004) Slim Holes At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank &...

  6. Ribbon-cutting Ceremony Set for New Radiological and Environmental Sciences Laboratory

    Office of Energy Efficiency and Renewable Energy (EERE)

    IDAHO FALLS— On Monday, Aug. 22, an open house and ribbon-cutting ceremony will be held to mark the opening of the U.S. Department of Energy’s new Radiological and Environmental Sciences Laboratory. The mission of the RESL facility is to provide measurement quality assurance for programs that protect workers, the public and the environment. The media is welcome to join us and tour the new facility.

  7. STUDY OF TWO SUCCESSIVE THREE-RIBBON SOLAR FLARES ON 2012 JULY 6

    SciTech Connect (OSTI)

    Wang, Haimin; Liu, Chang; Deng, Na; Xu, Yan; Jing, Ju; Zeng, Zhicheng; Cao, Wenda

    2014-01-20

    This Letter reports two rarely observed three-ribbon flares (M1.9 and C9.2) on 2012 July 6 in NOAA AR 11515, which we found using Hα observations of 0.''1 resolution from the New Solar Telescope and Ca II H images from Hinode. The flaring site is characterized by an intriguing ''fish-bone-like'' morphology evidenced by both Hα images and a nonlinear force-free field (NLFFF) extrapolation, where two semi-parallel rows of low-lying, sheared loops connect an elongated, parasitic negative field with the sandwiching positive fields. The NLFFF model also shows that the two rows of loops are asymmetric in height and have opposite twists, and are enveloped by large-scale field lines including open fields. The two flares occurred in succession within half an hour and are located at the two ends of the flaring region. The three ribbons of each flare run parallel to the magnetic polarity inversion line, with the outer two lying in the positive field and the central one in the negative field. Both flares show surge-like flows in Hα apparently toward the remote region, while the C9.2 flare is also accompanied by EUV jets possibly along the open field lines. Interestingly, the 12-25 keV hard X-ray sources of the C9.2 flare first line up with the central ribbon then shift to concentrate on the top of the higher branch of loops. These results are discussed in favor of reconnection along the coronal null line, producing the three flare ribbons and the associated ejections.

  8. Magnetocaloric properties of rapidly solidified Dy{sub 3}Co alloy ribbons

    SciTech Connect (OSTI)

    Sánchez Llamazares, J. L. Flores-Zúñiga, H.; Sánchez-Valdés, C. F.; Álvarez-Alonso, Pablo

    2015-05-07

    The magnetic and magnetocaloric (MC) properties of melt-spun ribbons of the Dy{sub 3}Co intermetallic compound were investigated. Samples were fabricated in an Ar environment using a homemade melt spinner system at a linear speed of the rotating copper wheel of 40 ms{sup −1}. X-ray diffraction analysis shows that ribbons crystallize into a single-phase with the Fe{sub 3}C-type orthorhombic crystal structure. The M(T) curve measured at 5 mT reveals the occurrence of a transition at 32 K from a first to a second antiferromagnetic (AFM) state and an AFM-to-paramagnetic transition at T{sub N} = 43 K. Furthermore, a metamagnetic transition is observed below T{sub N}, but the magnetization change ΔM is well below the one reported for bulk alloys. Below 12 K, large inverse MC effect and hysteresis losses are observed. This behavior is related to the metamagnetic transition. For a magnetic field change of 5 T (2 T) applied along the ribbon length, the produced ribbons show a peak value of the magnetic entropy change ΔS{sub M}{sup peak} of −6.5 (− 2.1) Jkg{sup −1}K{sup −1} occurring close to T{sub N} with a full-width at half-maximum δT{sub FWHM} of 53 (37) K, and refrigerant capacity RC = 364 (83) Jkg{sup −1} (estimated from the product |ΔS{sub M}{sup peak}| × δT{sub FWHM})

  9. Exascale Workshop Panel Report Meeting

    SciTech Connect (OSTI)

    Khaleel, Mohammad A.

    2010-07-01

    The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

  10. THE SOLAR WIND AS A POSSIBLE SOURCE OF FAST TEMPORAL VARIATIONS OF THE HELIOSPHERIC RIBBON

    SciTech Connect (OSTI)

    Kucharek, H.; Lee, M. A.; Moebius, E.; Schwadron, N.; Fuselier, S. A.; McComas, D.; Wurz, P.; Pogorelov, N.; Borovikov, S.; Reisenfeld, D.; Funsten, H.

    2013-10-20

    We present a possible source of pickup ions (PUIs) the ribbon observed by the Interstellar Boundary EXplorer (IBEX). We suggest that a gyrating solar wind and PUIs in the ramp and in the near downstream region of the termination shock (TS) could provide a significant source of energetic neutral atoms (ENAs) in the ribbon. A fraction of the solar wind and PUIs are reflected and energized during the first contact with the TS. Some of the solar wind may be reflected propagating toward the Sun but most of the solar wind ions form a gyrating beam-like distribution that persists until it is fully thermalized further downstream. Depending on the strength of the shock, these gyrating distributions can exist for many gyration periods until they are scattered/thermalized due to wave-particle interactions at the TS and downstream in the heliosheath. During this time, ENAs can be produced by charge exchange of interstellar neutral atoms with the gyrating ions. In order to determine the flux of energetic ions, we estimate the solar wind flux at the TS using pressure estimates inferred from in situ measurements. Assuming an average path length in the radial direction of the order of a few AU before the distribution of gyrating ions is thermalized, one can explain a significant fraction of the intensity of ENAs in the ribbon observed by IBEX. With a localized source and such a short integration path, this model would also allow fast time variations of the ENA flux.

  11. Blue Sky Group Inc | Open Energy Information

    Open Energy Info (EERE)

    Group Inc Jump to: navigation, search Name: Blue Sky Group Inc Place: Laramie, Wyoming Zip: WY 82072-3 Product: Blue Sky is an incubator that builds high quality, high tech...

  12. Blue Sky Bio Fuels | Open Energy Information

    Open Energy Info (EERE)

    Bio Fuels Jump to: navigation, search Name: Blue Sky Bio-Fuels Place: Oakland, California Zip: 94602 Product: Blue Sky owns and operates a biodiesel plant in Idaho with a capacity...

  13. Inside the White House: Solar Panels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inside the White House: Solar Panels Inside the White House: Solar Panels

  14. Wood panel earth shelter construction

    SciTech Connect (OSTI)

    Berg, J.R.; Loveless, J.G.; Senkow, W.

    1986-05-27

    An earth sheltered building is described including an arch structure, the structure including footings, a floor extending between the footings and arch means extending between the footings and having a base having lower ends on the footings for defining an enclosure which is covered with earth and open at opposite ends. The arch structure consists of: joined, curved wooden panel sections arranged in tandem in adjacent rows with more than two panel sections in a row, each of the sections including circumferentially extending wooden side members; wooden sheathing sections overlying the top skins of panel sections, the sheathing including a plurality of plywood sheets lapped over the joints between the panel sections and treated with a preservative; an adhesive joining the panel sections together within each row and to adjacent rows; waterproofing means on the sheathing for waterproofing the exterior surface of the arch means; connecting means engaging the base of the arch means at the footings and within the floor for tying the base together at its lower ends; and end walls and fastener means for joining the end walls to lateral edges of the arch means, the end walls dimensioned to extend above the arch means to retain earth placed on the arch means.

  15. Plasma Panel Based Radiation Detectors

    SciTech Connect (OSTI)

    Friedman, Dr. Peter S.; Varner Jr, Robert L; Ball, Robert; Beene, James R; Ben Moshe, M.; Benhammou, Yan; Chapman, J. Wehrley; Etzion, E; Ferretti, Claudio; Bentefour, E; Levin, Daniel S.; Moshe, M.; Silver, Yiftah; Weaverdyck, Curtis; Zhou, Bing

    2013-01-01

    The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels (PDPs). It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in PDPs, it uses non-reactive, intrinsically radiation-hard materials such as glass substrates, refractory metal electrodes, and mostly inert gas mixtures. We are developing these devices primarily as thin, low-mass detectors with gas gaps from a few hundred microns to a few millimeters. The PPS is a high gain, inherently digital device with the potential for fast response times, fine position resolution (< 50 m RMS) and low cost. In this paper we report here on prototype PPS experimental results in detecting betas, protons and cosmic muons, and we extrapolate on the PPS potential for applications including detection of alphas, heavy-ions at low to medium energy, thermal neutrons and X-rays.

  16. Inflation and alternatives with blue tensor spectra

    SciTech Connect (OSTI)

    Wang, Yi; Xue, Wei E-mail: wei.xue@sissa.it

    2014-10-01

    We study the tilt of the primordial gravitational waves spectrum. A hint of blue tilt is shown from analyzing the BICEP2 and POLARBEAR data. Motivated by this, we explore the possibilities of blue tensor spectra from the very early universe cosmology models, including null energy condition violating inflation, inflation with general initial conditions, and string gas cosmology, etc. For the simplest G-inflation, blue tensor spectrum also implies blue scalar spectrum. In general, the inflation models with blue tensor spectra indicate large non-Gaussianities. On the other hand, string gas cosmology predicts blue tensor spectrum with highly Gaussian fluctuations. If further experiments do confirm the blue tensor spectrum, non-Gaussianity becomes a distinguishing test between inflation and alternatives.

  17. Solar panel truss mounting systems and methods

    DOE Patents [OSTI]

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2016-06-28

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  18. Solar panel truss mounting systems and methods

    DOE Patents [OSTI]

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2015-10-20

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  19. Preparation of blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} phosphors in reverse micellar system and their application to transparent emissive display devices

    SciTech Connect (OSTI)

    Choi, Sungho; Tae, Se-Won; Seo, Jung-Hyun; Jung, Ha-Kyun

    2011-06-15

    Blue-emitting Eu{sup 2+}-doped CaMgSi{sub 2}O{sub 6} phosphors were prepared by the reverse micelle method. The resultant particles were nanocrystalline with a grain size of about <300 nm and exhibited a characteristic blue emission spectrum centered at 445 nm induced by the oxygen coordinated Eu{sup 2+} ions. By using the corresponding nanophosphors followed by the formation of a uniform phosphor layer, we have demonstrated the mini-sized transparent plasma-discharge panels and investigated their luminance characteristics. Phosphor coated panel is properly transparent, {>=}65%, at the visible wavelength region and illuminates a characteristic blue emission under Ne/Xe plasma discharge conditions. Thus, we can obtain a fast decaying, robust blue-emitting silicate phosphor layer under excited plasma radiation for upcoming emissive display devices like as transparent and three-dimensional plasma display panels. - Graphical abstract: Blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} nanophosphors coated transparent luminescent layers can be obtained. It illuminates the characteristic blue emission, spectrum centered at 425 nm wavelength, under the Ne-Xe mixed gas plasma discharge condition. Highlights: > Blue-emitting CaMgSi{sub 2}O{sub 6}:Eu{sup 2+} nanophosphors via reverse micelle method. > Transparent blue-emitting layer was prepared by using corresponding phosphors. > Fast decaying with degradation-free luminescent layer under plasma radiation. > Promising luminescent layer for the upcoming plasma discharged transparent displays.

  20. Solar collector panel and method

    SciTech Connect (OSTI)

    King, W. S.

    1985-04-23

    A solar collector panel having a solar energy collector plate and means for flowing a fluid along one side of the plate in a perpendicular serpentine path so that the fluid is repetitively moved toward and away from the plate as it moves along the plate.

  1. Peg supported thermal insulation panel

    DOE Patents [OSTI]

    Nowobilski, J.J.; Owens, W.J.

    1985-04-30

    A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

  2. Peg supported thermal insulation panel

    DOE Patents [OSTI]

    Nowobilski, Jeffert J.; Owens, William J.

    1985-01-01

    A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

  3. Accumulated destructive effect of nanosecond repetitive voltage pulses on the insulated coatings of Fe-based nanocrystalline ribbon

    SciTech Connect (OSTI)

    Zhang, Yu; Liu, Jinliang

    2013-03-11

    Fe-based nanocrystalline ribbon is widely employed in pulsed power devices and accelerators. A temperature accumulation model is put forward to explain the accumulated destructive effect of discharge plasma bombardment on the TiO{sub 2} coatings of nanocrystalline ribbon under 50 Hz/100 ns voltage pulses. Experimental results revealed that the plasma channel expansion caused by air breakdown in the coating crack heated the coating repetitively, and the coating temperature was increased and accumulated around the crack. The fact that repetitive voltage pulses were more destructive than a single pulse with the same amplitude was caused by the intensified coating ablation under the temperature accumulation effect.

  4. Proposal Review Panel | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Review Panel Submitting a proposal is the first step to access beam time at SSRL. Proposals are peer reviewed and rated by the SSRL Proposal Review Panel (PRP) on a scale ...

  5. Advisory Panels | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SAC Website SSRL Proposal Review Panel (PRP) Access to SSRL beam lines is granted through proposals that are peer-reviewed and rated by the SSRL Proposal Review Panel (PRP). The ...

  6. Seismic Lessons-Learned Panel Meetings

    Broader source: Energy.gov [DOE]

    The Chief of Nuclear Security (CNS) maintains a panel of experts known as the Seismic Lessons-Learned Panel, which meets periodically to discuss seismic issues impacting DOE facilities.

  7. Mechanically stable, high aspect ratio, multifilar, wound, ribbon-type conductor and method for manufacturing same

    DOE Patents [OSTI]

    Cottingham, James G.

    1987-01-01

    A mechanically stable, wound, multifilar, ribbon-type conductor having a cross-sectional aspect ratio which may be greater than 12:1, comprising a plurality of conductive strands wound to form a flattened helix containing a plastic strip into which the strands have been pressed so as to form a bond between the strip and the strands. The bond mechanically stabilizes the conductor under tension, preventing it from collapsing into a tubular configuration. In preferred embodiments the plastic strip may be polytetrafluoroethylene, and the conductive strands may be formed from a superconductive material. Conductors in accordance with the present invention may be manufactured by winding a plurality of conductive strands around a hollow mandrel; the cross-section of a hollow mandrel; the cross-section of the mandrel continuously varying from substantially circular to a high aspect ratio elipse while maintaining a constant circumference. The wound conductive strands are drawn from the mandrel as a multifilar helix while simultaneously a plastic strip is fed through the hollow mandrel so that it is contained within the helix as it is withdrawn from the mandrel. The helical conductor is then compressed into a ribbon-like form and the strands are bonded to the plastic strip by a combination of heat and pressure.

  8. Total System Performance Assessment Peer Review Panel

    Broader source: Energy.gov [DOE]

    Total System Performance Assessment (TSPA) Peer Review Panel for predicting the performance of a repository at Yucca Mountain.

  9. Blue Lake Rancheria Kicks Off Solar System Construction | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Blue Lake Rancheria Kicks Off Solar System Construction Blue Lake Rancheria Kicks Off Solar System Construction May 9, 2016 - 5:54pm Addthis Blue Lake Rancheria Energy Director Jana Ganion flanked by Kernen Construction Site Supervisor Gavin Johnson (left) and Blue Lake Rancheria Facilities Director Neil Harris (right). Photo from Blue Lake Rancheria Blue Lake Rancheria Energy Director Jana Ganion flanked by Kernen Construction Site Supervisor Gavin Johnson (left) and Blue Lake

  10. Blue Flint Ethanol | Open Energy Information

    Open Energy Info (EERE)

    Flint Ethanol Jump to: navigation, search Name: Blue Flint Ethanol Place: Underwood, North Dakota Zip: ND 58576 Product: Joint Venture bentween Great River Energy and Headwaters...

  11. Blue Source LLC | Open Energy Information

    Open Energy Info (EERE)

    Source LLC Jump to: navigation, search Name: Blue Source LLC Place: Salt Lake City, Utah Zip: 84121 Product: Salt Lake City-based emission offset aggregation company. References:...

  12. Blue Square Energy BSE | Open Energy Information

    Open Energy Info (EERE)

    Energy BSE Jump to: navigation, search Name: Blue Square Energy (BSE) Place: Maryland Zip: 21901 Product: US manufacturer of low-purity crystalline silicon cells and modules...

  13. Blue Motion Energy | Open Energy Information

    Open Energy Info (EERE)

    Motion Energy Jump to: navigation, search Name: Blue Motion Energy Region: Netherlands Sector: Marine and Hydrokinetic Website: http: This company is listed in the Marine and...

  14. Blue Planet Solar | Open Energy Information

    Open Energy Info (EERE)

    Planet Solar Jump to: navigation, search Name: Blue Planet Solar Place: Antwerp, Belgium Zip: B-2060 Sector: Services, Solar Product: Belgium-based firm that offers installation,...

  15. Blue Green Capital | Open Energy Information

    Open Energy Info (EERE)

    Green Capital Jump to: navigation, search Name: Blue Green Capital Place: Spain Zip: 8860 Sector: Renewable Energy, Solar Product: String representation "Spanish develop ... their...

  16. Blue Marble Energy Corporation | Open Energy Information

    Open Energy Info (EERE)

    Name: Blue Marble Energy Corporation Place: Seattle, Washington Zip: 98108 Sector: Bioenergy Product: Washington State-based firm developing technology to convert biowaste into...

  17. Robert M. Blue President Dominion Virginia Power

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Robert M. Blue President Dominion Virginia Power "Enhancing Resilience in Energy Infrastructure and Addressing Vulnerabilities" Quadrennial Energy Review Task Force April 11, 2014 ...

  18. Blue C Ltd | Open Energy Information

    Open Energy Info (EERE)

    C Ltd Jump to: navigation, search Name: Blue C, Ltd. Place: Seattle, Washington Zip: 98104 Sector: Renewable Energy Product: An advisory firm providing project and investment...

  19. Blue Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    (DB2) was drilled and completed in 2004.9 Information from these two wells showed that geothermal energy could be commercially produced at Blue Mountain. Geothermal production...

  20. Blue Cove Ventures | Open Energy Information

    Open Energy Info (EERE)

    Ventures Jump to: navigation, search Name: Blue Cove Ventures Place: Australia Sector: Services Product: General Financial & Legal Services ( Private family-controlled )...

  1. Blue Star Energy Services | Open Energy Information

    Open Energy Info (EERE)

    Services Jump to: navigation, search Name: Blue Star Energy Services Place: Illinois Phone Number: 866-258-3782 Website: www.aepenergy.com Twitter: @aepenergy Facebook: https:...

  2. Blue Marble Energy | Open Energy Information

    Open Energy Info (EERE)

    Energy Jump to: navigation, search Name: Blue Marble Energy Address: P.O. Box 9190 Place: Seattle, Washington Zip: 98109 Region: Pacific Northwest Area Sector: Biomass Product:...

  3. Blue Gene/Q Versus Blue Gene/P | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    System Overview Blue Gene/Q Versus Blue Gene/P BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Blue Gene/Q Versus Blue

  4. SGIP Smart Grid Interoperabilty Panel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SGIP Smart Grid Interoperability Panel Building2Grid Integration Dave Hardin David Holmberg ∗ The SGIP was explicitly established to support NIST in fulfilling its responsibilities pursuant to the Energy Independence and Security Act of 2007 ("EISA"). SGIP 1.0: NIST-funded, SGIP 2.0: Member-funded ∗ SGIP's mission is to provide a framework for coordinating all Smart Grid stakeholders in an effort to accelerate standards harmonization and advance the Interoperability of Smart Grid

  5. WM2015 Conference Panel Report

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    016: Lessons Learned and Return to Operations Following the 2014 Operational Incidents at WIPP Session Co-Chairs: Joe Franco, US DOE, Carlsbad Field Office Robert McQuinn, Nuclear Waste Partnership, LLC Panel Reporter: Roger Nelson, US DOE, Carlsbad Field Office Panelists:  Sean Dunagan, Recovery Manager, Carlsbad Field Office, US DOE  Mark Senderling, Headquarters Recovery Manager, US DOE - EM  Jim Blankenhorn, Recovery Manager, Nuclear Waste Partnership  J.R. Stroble, TRU Sites and

  6. Panel 4 - applications to transportation

    SciTech Connect (OSTI)

    Nichols, F.; Au, J.; Bhattacharya, R.; Bhushan, B.; Blunier, D.; Boardman, B.; Brombolich, L.; Davidson, J.; Graham, M.; Hakim, N.; Harris, K.; Hay, R.; Herk, L.; Hojnacki, H.; Rourk, D.; Kamo, R.; Nieman, B.; O`Neill, D.; Peterson, M.B.; Pfaffenberger, G.; Pryor, R.W.; Russell, J.; Syniuta, W.; Tamor, M.; Vojnovich, T.; Yarbrough, W.; Yust, C.S.

    1993-01-01

    The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

  7. Anisotropic hot deformed magnets prepared from Zn-coated MRE-Fe-B ribbon powder (MRE?=?Nd?+?Y?+?Dy)

    SciTech Connect (OSTI)

    Tang, W; Zhou, L; Sun, K W; Dennis, K W; Kramer, M J; Anderson, I E; McCallum, R W

    2014-05-07

    Milled melt-spun ribbon flake of MRE-Fe-B coated with Zn coating using a vapor transport technique was found to have significant increase in coercivity without degrading the magnetization when the Zn thickness and heat treatment were optimized. Magnetic measurements show that 0.51?wt.?% Zn coating increases the coercivity about 1?kOe over the initial ribbon powder. After vacuum hot deformation (VHD), the VHD magnet with Zn coating of 0.5?wt.?% results in a nearly 3?kOe higher coercivity than an un-coated alloy magnet. An optimized VHD magnet with 0.5?wt.?% Zn coating obtains a coercivity of 11.2?kOe and (BH)max of 23.0 MGOe, respectively. SEM and TEM microstructures analysis demonstrates that the Zn coating on the surface of ribbon powder has diffused along the intergranular boundaries after the ribbon powder was annealed at 750?C for 30?min or was hot deformed at 700750?C.

  8. Innovative Approaches to Low-Cost Module Manufacturing of String Ribbon Si PV Modules; Final Subcontract Report, March 2002 - January 2005

    SciTech Connect (OSTI)

    Hanoka, J. I.

    2005-10-01

    As a result of this work, Evergreen Solar, Inc., is now poised to take String Ribbon technology to new heights. In the ribbon growth area, Project Gemini-the growth of dual ribbons from a single crucible-has reached or exceeded all the manufacturing goals set for it. This project grew from an R&D concept to a production pilot phase and finally to a full production phase, all within the span of this subcontract. A major aspect of the overall effort was the introduction of controls and instrumentation as in-line diagnostic tools. In the ribbon production area, the result has been a 12% increase in yields, a 10% increase in machine uptime, and the flattest ribbon ever grown at Evergreen. In the cell area, advances in process development and robotic handling of Gemini wafers have contributed, along with the advances in crystal growth, to a yield improvement of 6%. Particularly noteworthy in the cell area was the refinement of the no-etch process whereby the as-grown ribbon surface could be controlled sufficiently to allow this process to succeed as well as it has. This process obviates any need for wet chemistry or etching between ribbon growth and diffusion.

  9. BluePlanet Capital LLC | Open Energy Information

    Open Energy Info (EERE)

    BluePlanet Capital LLC Jump to: navigation, search Name: BluePlanet Capital LLC Place: Washington, Connecticut Zip: 6793 Sector: Services Product: BluePlanet Capital is an...

  10. BlueFire Ethanol, Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BlueFire Ethanol, Inc. BlueFire Ethanol, Inc. A proposal issued by BlueFire Ethanol Inc,describing a project that will give DOE understanding of a new biological fermentation ...

  11. IBM's New Flat Panel Displays

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by J. Stöhr (SSRL), M. Samant (IBM), J. Lüning (SSRL) Today's laptop computers utilize flat panel displays where the light transmission from the back to the front of the display is modulated by orientation changes in liquid crystal (LC) molecules. Details are discussed in Ref. 2 below. One of the key steps in the manufacture of the displays is the alignment of the LC molecules in the display. Today this is done by mechanical rubbing of two polymer surfaces and then sandwiching the LC between

  12. Blue-emitting AlN:Eu{sup 2+} nitride phosphor for field emission displays

    SciTech Connect (OSTI)

    Hirosaki, N.; Xie, R.-J.; Inoue, K.; Sekiguchi, T.; Dierre, B.; Tamura, K.

    2007-08-06

    An Eu{sup 2+}-activated AlN phosphor was synthesized by firing the powder mixture of AlN, {alpha}-Si{sub 3}N{sub 4}, and Eu{sub 2}O{sub 3} at 2050 deg. C for 4 h under 1.0 MPa N{sub 2}. This nitride phosphor emits a strong blue color with the chromaticity coordinates of x=0.139 and y=0.106 at an accelerating voltage of 3 kV. The cathodoluminescence properties of AlN:Eu{sup 2+} was evaluated by utilizing it in the Spindt-type field emission display panel. It shows that the nitride phosphor exhibits higher brightness, higher color purity, lower saturation, and longer lifetime than the currently used Y{sub 2}SiO{sub 5}:Ce{sup 3+}, indicative of the suitability of the AlN:Eu{sup 2+} blue phosphor in field emission displays.

  13. Blue Aquarius Fish Farms Aquaculture Low Temperature Geothermal...

    Open Energy Info (EERE)

    Blue Aquarius Fish Farms Aquaculture Low Temperature Geothermal Facility Jump to: navigation, search Name Blue Aquarius Fish Farms Aquaculture Low Temperature Geothermal Facility...

  14. Observation Wells At Blue Mountain Area (Warpinski, Et Al., 2004...

    Open Energy Info (EERE)

    Blue Mountain Area (Warpinski, Et Al., 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Observation Wells At Blue Mountain Area (Warpinski,...

  15. Aerial Photography At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aerial Photography At Blue...

  16. Static Temperature Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Static Temperature Survey At Blue...

  17. City of Blue Hill, Nebraska (Utility Company) | Open Energy Informatio...

    Open Energy Info (EERE)

    Blue Hill, Nebraska (Utility Company) Jump to: navigation, search Name: Blue Hill Municipal Power Place: Nebraska Phone Number: 402.756.3771 Website: bluehillne.comcommunity.php...

  18. Blue Spruce Farm Ana Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    Spruce Farm Ana Biomass Facility Jump to: navigation, search Name Blue Spruce Farm Ana Biomass Facility Facility Blue Spruce Farm Ana Sector Biomass Location Vermont Coordinates...

  19. Field Mapping At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Field Mapping At Blue Mountain...

  20. EA-1746: Blue Mountain Geothermal Development Project, Humboldt...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    46: Blue Mountain Geothermal Development Project, Humboldt & Pershing County, NV EA-1746: Blue Mountain Geothermal Development Project, Humboldt & Pershing County, NV December 3,...

  1. Blue Ridge Renewable Energy LLC | Open Energy Information

    Open Energy Info (EERE)

    Renewable Energy LLC Jump to: navigation, search Name: Blue Ridge Renewable Energy LLC Place: Arlington, Virginia Zip: 22209 Product: Developer and operator of the Blue Ridge...

  2. Slim Holes At Blue Mountain Area (Warpinski, Et Al., 2002) |...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Slim Holes At Blue Mountain Area (Warpinski, Et Al., 2002) Exploration Activity Details Location Blue...

  3. BlueWave Capital LLC | Open Energy Information

    Open Energy Info (EERE)

    BlueWave Capital LLC Jump to: navigation, search Name: BlueWave Capital LLC Place: Boston, Massachusetts Sector: Renewable Energy Product: Knowledge-based investment firm focused...

  4. Conceptual Model At Blue Mountain Geothermal Area (Faulds & Melosh...

    Open Energy Info (EERE)

    the Blue Mountain geothermal system integrating data from previous studies. References James E. Faulds, Glenn Melosh (2008) A Preliminary Structural Model for the Blue Mountain...

  5. MHK Technologies/Blue Motion Energy marine turbine | Open Energy...

    Open Energy Info (EERE)

    Blue Motion Energy marine turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Blue Motion Energy marine turbine.jpg Technology Profile...

  6. China National BlueStar Group Corporation | Open Energy Information

    Open Energy Info (EERE)

    BlueStar Group Corporation Jump to: navigation, search Name: China National BlueStar Group Corporation Place: Beijing, Beijing Municipality, China Zip: 100029 Product: State-owned...

  7. CECIC Blue Sky Investment Consulting Management Co Ltd | Open...

    Open Energy Info (EERE)

    CECIC Blue Sky Investment Consulting Management Co Ltd Jump to: navigation, search Name: CECIC Blue-Sky Investment Consulting & Management Co. Ltd Place: Beijing, Beijing...

  8. Carolina Blue Skies & Green Jobs Initiative | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications Carolinas Blue Skies & Green Jobs Initiative Carolina Blue Skies & Green Jobs Initiative New York State-wide Alternative Fuel Vehicle Program for ...

  9. Carolina Blue Skies & Green Jobs Initiative | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (577.38 KB) More Documents & Publications Carolinas Blue Skies & Green Jobs Initiative Carolina Blue Skies & Green Jobs Initiative Advanced Electric Drive Vehicle Education Program

  10. NREL Employee Appointed to Presidential Panel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Employee Appointed to Presidential Panel For more information contact: e:mail: Public Affairs Golden, Colo., April 10, 1997 -- Sam Baldwin, international programs director for the U.S. Department of Energy's National Renewable Energy Laboratory (NREL), has been named to the President's Committee of Advisors on Science and Technology (PCAST) as the staff study director for PCAST's Energy Research and Development Panel. The panel will review current and projected U.S. energy research and

  11. Multi-clad black display panel

    SciTech Connect (OSTI)

    Veligdan, James T.; Biscardi, Cyrus; Brewster, Calvin

    2002-01-01

    A multi-clad black display panel, and a method of making a multi-clad black display panel, are disclosed, wherein a plurality of waveguides, each of which includes a light-transmissive core placed between an opposing pair of transparent cladding layers and a black layer disposed between transparent cladding layers, are stacked together and sawed at an angle to produce a wedge-shaped optical panel having an inlet face and an outlet face.

  12. MODIFICATIONS TO THE WIPP PANEL CLOSURE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29 Panel Closure ATTACHMENT 1 NMED COMMENTS ITEM 1 - MODIFICATIONS TO THE WIPP PANEL CLOSURE Page 2 of 29 Panel Closure 1-1: PMR Overview, Section 1, "Revision to the PCS Design" This section needs to explicitly explain which Attachment G1 Appendices are being deleted and which new appendices contain relevant information from old appendices. For example, Appendix B appears to include consolidated relevant information from the previous Appendices B through F; the new Appendix A replaces

  13. Walk-In Panels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Walk-In Panels Walk-In Panels The Department of Energy (DOE) develops standardized data templates for reporting the results of tests conducted in accordance with current DOE test procedures. Templates may be used by third-party laboratories under contract with DOE that conduct testing in support of ENERGY STAR® verification, DOE rulemakings, and enforcement of the federal energy conservation standards. Walk-In Panels - v1.2.xlsx (70.45 KB) More Documents & Publications Refrigerators and

  14. Panel Discussion | OpenEI Community

    Open Energy Info (EERE)

    on the project background and history, status updates, analysis summary and future directions. The day ended with a panel discussion, with members including Lee Webb...

  15. OpenEI Community - Panel Discussion

    Open Energy Info (EERE)

    on the project background and history, status updates, analysis summary and future directions. The day ended with a panel discussion, with members including Lee...

  16. Apparatus for manifolding multiple passage solar panel

    SciTech Connect (OSTI)

    Mcalister, R.E.

    1982-06-08

    A method of sealingly connecting a thermoplastic solar panel structure comprising a multiplicity of elongated thin wall sections defining a multiplicity of parallel passages extending longitudinally between the ends of said panel structure to a thermoplastic manifold tube comprising the steps of mounting an elongated mandrel having a multiplicity of transversely projecting elements corresponding in number and spacing to the panel passages to be communicated with the interior of the manifold tube, positioning a side wall portion of the manifold tube in predetermined spaced relation with the open end of the panel structure so that the projecting elements of the mandrel are generally longitudinally aligned with the open ends of a corresponding member of the passages in the panel structure, heating the spaced panel structure end and the manifold tube side wall portion to soften the thermoplastic material thereof, moving the mandrel within the manifold tube so as to position the projecting elements through the side wall portion thereof and into the open ends of said corresponding panel structure passages and the manifold tube toward the panel structure end so as to cause the manifold tube side wall portion to apply a pressure to the panel structure end sufficient to deform the thermoplastic material thereof and effect a fusing of the same into a unitary mass, and withdrawing the mandrel in the direction of extent of the projecting elements to a position within the interior of the manifold tube and then longitudinally out of the manifold tube and apparatus for carrying out the method.

  17. MINUTES FROM SEISMIC LESSONS-LEARNED PANEL

    Office of Environmental Management (EM)

    ... Publishing such calculations will allow others to reference the method and prevent ... Process, as acceptable for use. The panel expressed consensus in 2009 that these new ...

  18. Federal Technical Capability Panel Conference Call Minutes -...

    Energy Savers [EERE]

    Federal Technical Capability Panel Conference Call Minutes January 20, 2016 Karen Boardman, Chair, not in attendance. Participating in DOE HQ Conference Call. Dave Chaney, Deputy ...

  19. Solar Decathlon Technology Spotlight: Structural Insulated Panels...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Structural insulated panels (SIPs) are prefabricated structural elements used to build walls, ceilings, floors, and roofs. Made of foam insulation sandwiched between two layers of ...

  20. AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT

    SciTech Connect (OSTI)

    Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.

    2010-12-03

    Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.

  1. Kingspan Insulated Panels: Order (2013-CE-5353)

    Broader source: Energy.gov [DOE]

    DOE ordered Kingspan Insulated Panels, Inc. to pay a $8,000 civil penalty after finding Kingspan Insulated Panels had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  2. Method of making a solar panel

    SciTech Connect (OSTI)

    Anderson, J.R.; Dominguez, R.

    1982-05-25

    A solar panel in which interconnected photovoltaic cells are maintained in light-receiving position by electrically conductive clips secured to the base of the panel. When the cells and clips are encapsulated in a protective resin, a vacuum is drawn during encapsulation to remove air bubbles trapped beneath the cells.

  3. Diversified Panel Systems: Order (2013-CE-5346)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Diversified Panel Systems, Inc. to pay a $8,000 civil penalty after finding Diversified Panel Systems had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  4. Gas pump with movable gas pumping panels

    DOE Patents [OSTI]

    Osher, John E.

    1984-01-01

    Apparatus for pumping gas continuously a plurality of articulated panels of getter material, each of which absorbs gases on one side while another of its sides is simultaneously reactivated in a zone isolated by the panels themselves from a working space being pumped.

  5. Gas pump with movable gas pumping panels

    DOE Patents [OSTI]

    Osher, J.L.

    Apparatus for pumping gas continuously a plurality of articulated panels of getter material, each of which absorbs gases on one side while another of its sides is simultaneously reactivated in a zone isolated by the panels themselves from a working space being pumped.

  6. Blue Gene/Q | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blue Gene/Q Download original image « Back to galleryItem 4

  7. EA-1746: Blue Mountain Geothermal Development Project, Humboldt & Pershing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    County, NV | Department of Energy 46: Blue Mountain Geothermal Development Project, Humboldt & Pershing County, NV EA-1746: Blue Mountain Geothermal Development Project, Humboldt & Pershing County, NV December 3, 2007 EA-1746: Final Environmental Assessment Blue Mountain Geothermal Development Project April 26, 2010 EA-1746: Finding of No Significant Impact Blue Mountain Geothermal Development Project, Humboldt and Pershing Counties, Nevada

  8. Solar energy collection panel and method

    SciTech Connect (OSTI)

    Lemelson, J.H.

    1981-10-13

    A solar energy, concentrating and absorption panel is provided together with a method for converting solar energy to heat energy or electrical energy by the reflection and concentration of solar energy intersecting the panel. The panel is formed with a solar energy receiving portion thereof which is defined by a plurality of parallel channels extending horizontally across the panel, each of which contains at least two side wall portions which are highly reflective of light and which converge towards each other so that light entering such channels is reflected off the side wall portions thereof against the opposite side wall portions and continues to be directed toward the base of the channel, which base is coated with a light absorbing material such that the light directed thereagainst is concentrated and, as such, may be employed to heat either a fluid located in a passageway extending through the wall of the panel parallel and adjacent to the base of the channel.

  9. Report of the Federal Internetworking Requirements Panel

    SciTech Connect (OSTI)

    1994-05-31

    The Federal Internetworking Requirements Panel (FIRP) was established by the National Institute of Standards and Technology (NIST) to reassess Federal requirements for open systems networks and to recommend policy on the Government`s use of networking standards. The Panel was chartered to recommend actions which the Federal Government can take to address the short and long-term issues of interworking and convergence of networking protocols--particularly the Internet Protocol Suite (IPS) and Open Systems Interconnection (OSI) protocol suite and, when appropriate, proprietary protocols. The Panel was created at the request of the Office of Management and Budget in collaboration with the Federal Networking Council and the Federal Information Resources Management Policy Council. The Panel`s membership and charter are contained in an appendix to this report.

  10. Thin film photovoltaic panel and method

    DOE Patents [OSTI]

    Ackerman, Bruce; Albright, Scot P.; Jordan, John F.

    1991-06-11

    A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

  11. Micro-inverter solar panel mounting

    DOE Patents [OSTI]

    Morris, John; Gilchrist, Phillip Charles

    2016-02-02

    Processes, systems, devices, and articles of manufacture are provided. Each may include adapting micro-inverters initially configured for frame-mounting to mounting on a frameless solar panel. This securement may include using an adaptive clamp or several adaptive clamps secured to a micro-inverter or its components, and using compressive forces applied directly to the solar panel to secure the adaptive clamp and the components to the solar panel. The clamps can also include compressive spacers and safeties for managing the compressive forces exerted on the solar panels. Friction zones may also be used for managing slipping between the clamp and the solar panel during or after installation. Adjustments to the clamps may be carried out through various means and by changing the physical size of the clamps themselves.

  12. AMO Director Mark Johnson Moderates Panel at American Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    From left to right: Moderator Mark Johnson, panelists Dr. Craig Blue, Dean Jones, John ... From left to right: Moderator Mark Johnson, panelists Dr. Craig Blue, Dean Jones, John ...

  13. Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Fuels in Its Fleet Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet to someone by E-mail Share Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Facebook Tweet about Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Twitter Bookmark Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Google Bookmark Alternative Fuels Data Center: Blue Ridge

  14. Structural Analysis of Sandwich Foam Panels

    SciTech Connect (OSTI)

    Kosny, Jan; Huo, X. Sharon

    2010-04-01

    The Sandwich Panel Technologies including Structural Insulated Panels (SIPs) can be used to replace the conventional wooden-frame construction method. The main purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and SGI Venture, Inc. was to design a novel high R-value type of metal sandwich panelized technology. This CRADA project report presents design concept discussion and numerical analysis results from thermal performance study of this new building envelope system. The main objective of this work was to develop a basic concept of a new generation of wall panel technologies which will have R-value over R-20 will use thermal mass to improve energy performance in cooling dominated climates and will be 100% termite resistant. The main advantages of using sandwich panels are as follows: (1) better energy saving structural panels with high and uniform overall wall R-value across the elevation that could not be achieved in traditional walls; and (2) reducing the use of raw materials or need for virgin lumber. For better utilization of these Sandwich panels, engineers need to have a thorough understanding of the actual performance of the panels and system. Detailed analysis and study on the capacities and deformation of individual panels and its assembly have to be performed to achieve that goal. The major project activity was to conduct structural analysis of the stresses, strains, load capacities, and deformations of individual sandwich components under various load cases. The analysis simulated the actual loading conditions of the regular residential building and used actual material properties of the steel facings and foam.

  15. Method for manifolding multiple passage solar panel

    SciTech Connect (OSTI)

    Mcalister, R.E.

    1981-11-17

    A method of sealingly connecting a thermoplastic solar panel structure comprising a multiplicity of elongated thin wall sections defining a multiplicity of parallel passages extending longitudinally between the ends of said panel structure to a thermoplastic manifold tube is described. An elongated mandrel is mounted having a multiplicity of transversely projecting elements corresponding in number and spacing to the panel passages to be communicated with the interior of the manifold tube. A side wall portion of the manifold tube is positioned in predetermined spaced relation with the open end of the panel structure so that the projecting elements of the mandrel are generally longitudinally aligned with the open ends of a corresponding member of the passages in the panel structure. The spaced panel structure end and the manifold tube side wall portion are heated to soften the thermoplastic material thereof. The mandrel is moved within the manifold tube so as to position the projecting elements through the side wall portion thereof and into the open ends of said corresponding panel structure passages and the manifold tube toward the panel structure end so as to cause the manifold tube side wall portion to apply a pressure to the panel structure end sufficient to deform the thermoplastic material thereof and effect a fusing of the same into a unitary mass. The mandrel is then withdrawn in the direction of extent of the projecting elements to a position within the interior of the manifold tube and then longitudinally out of the manifold tube and apparatus for carrying out the method.

  16. Panel resonant behavior of wind turbine blades.

    SciTech Connect (OSTI)

    Paquette, Joshua A.; Griffith, Daniel Todd

    2010-03-01

    The principal design drivers in the certification of wind turbine blades are ultimate strength, fatigue resistance, adequate tip-tower clearance, and buckling resistance. Buckling resistance is typically strongly correlated to both ultimate strength and fatigue resistance. A composite shell with spar caps forms the airfoil shape of a blade and reinforcing shear webs are placed inside the blade to stiffen the blade in the flap-wise direction. The spar caps are dimensioned and the shear webs are placed so as to add stiffness to unsupported panel regions and reduce their length. The panels are not the major flap-wise load carrying element of a blade; however, they must be designed carefully to avoid buckling while minimizing blade weight. Typically, buckling resistance is evaluated by consideration of the load-deflection behavior of a blade using finite element analysis (FEA) or full-scale static testing of blades under a simulated extreme loading condition. The focus of this paper is on the use of experimental modal analysis to measure localized resonances of the blade panels. It can be shown that the resonant behavior of these panels can also provide a means to evaluate buckling resistance by means of analytical or experimental modal analysis. Further, panel resonances have use in structural health monitoring by observing changes in modal parameters associated with panel resonances, and use in improving panel laminate model parameters by correlation with test data. In recent modal testing of wind turbine blades, a set of panel modes were measured. This paper will report on the findings of these tests and accompanying numerical and analytical modeling efforts aimed at investigating the potential uses of panel resonances for blade evaluation, health monitoring, and design.

  17. The Next Generation of Solar Panels | Department of Energy

    Energy Savers [EERE]

    Scientists just got one step closer to the next generation of solar panels. Today's solar panels convert sunlight to electricity using silicon crystal chemistry. Future solar ...

  18. "PBS NEWSHOUR" covers new technique that may make solar panel...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    covers new technique that may make solar panel production less expensive "PBS NEWSHOUR" covers new technique that may make solar panel production less expensive Scientists have ...

  19. Memorandum on the Congressional Advisory Panel on the Governance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Congressional Advisory Panel on the Governance of the Nuclear Security Enterprise Memorandum on the Congressional Advisory Panel on the Governance of the Nuclear Security ...

  20. OLED Luminaire with Panel Integrated Drivers and Advanced Controls...

    Broader source: Energy.gov (indexed) [DOE]

    DC current drivers integrated with each panel, and a base station that interfaces with ... More Documents & Publications High-Performance OLED Panel and Luminaire Luminaires for ...

  1. Divya Energy Solar Panel Savings Calculator | Open Energy Information

    Open Energy Info (EERE)

    Divya Energy Solar Panel Savings Calculator Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Divya Energy Solar Panel Savings Calculator AgencyCompany Organization:...

  2. Low Capital Photovoltaic Panel Electrical Output-Booster System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Capital Photovoltaic Panel Electrical Output-Booster System Low Capital Photovoltaic Panel Electrical Output-Booster System This presentation summarizes the information given ...

  3. "PBS NEWSHOUR" covers new technique that may make solar panel...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "PBS NEWSHOUR" covers new technique that may make solar panel production less expensive "PBS NEWSHOUR" covers new technique that may make solar panel production less expensive ...

  4. Advance Reactor Concepts Technical Review Panel Public Report...

    Office of Environmental Management (EM)

    Advance Reactor Concepts Technical Review Panel Public Report Advance Reactor Concepts Technical Review Panel Public Report The Office of Nuclear Energy supports research and ...

  5. Women in STEM Panel @Mesa Public Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Women in STEM Panel @Mesa Public Library Women in STEM Panel @Mesa Public Library WHEN: Oct 15, 2015 7:00 PM - Feb 12, 2015 8:30 PM WHERE: Mesa Public Library 2400 Central Ave, Los Alamos, NM 87544 SPEAKER: Nicole-Lloyd-Ronning, Teri Roberts and Sandy Frost CATEGORY: Bradbury INTERNAL: Calendar Login Ada Lovelace day image Event Description Join the speakers for a conversation about women in STEM. In association with the Bradbury Science Museum. Women in STEM Panel @Mesa Public Library Join

  6. Development of a plasma panel radiation detector

    SciTech Connect (OSTI)

    Ball, Robert; Beene, James R; Ben Moshe, M.; Benhammou, Yan; Bensimon, B; Chapman, J. Wehrley; Etzion, E; Ferretti, Claudio; Friedman, Dr. Peter S.; Levin, Daniel S.; Silver, Yiftah; Weaverdyck, Curtis; Wetzel, R.; Zhou, Bing; Anderson, T; McKinny, K; Bentefour, E

    2014-11-01

    This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensor (PPS) design and materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically sealed device. Plasma display panels used as detectors were tested with cosmic ray muons, beta rays and gamma rays, protons, and thermal neutrons. The results demonstrated rise times and time resolution of a few nanoseconds, as well as sub-millimeter spatial resolution compatible with the pixel pitch.

  7. Flat or curved thin optical display panel

    DOE Patents [OSTI]

    Veligdan, J.T.

    1995-01-10

    An optical panel includes a plurality of waveguides stacked together, with each waveguide having a first end and an opposite second end. The first ends collectively define a first face, and the second ends collectively define a second face of the panel. The second face is disposed at an acute face angle relative to the waveguides to provide a panel which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face is substantially smaller in height than the second face and receives a TV image, with the second face defining a screen for viewing the image enlarged. 7 figures.

  8. Multi-cusp ion source for doping process of flat panel display manufacturing

    SciTech Connect (OSTI)

    Inouchi, Yutaka Matsumoto, Takeshi; Dohi, Shojiro; Tanii, Masahiro; Takahashi, Genki; Nishimura, Ippei; Tatemichi, Junichi; Konishi, Masashi; Naito, Masao

    2014-02-15

    We developed a multi-cusp ion source for Nissin ion doping system iG5 which is used in low temperature poly-crystalline silicon processes for flat panel display (FPD) manufacturing. In this ion source, BF{sub 3} or PH{sub 3} diluted H{sub 2} plasmas are produced and large area ribbon ion beams are extracted. In general, ion ratio of B{sup +} in BF{sub 3} plasma is much smaller than BF{sub 2}{sup +} in multi-cusp ion sources. We developed a new method to increase B{sup +} ratio and obtained mass analyzed B{sup +} target current of 130 mA. We employed newly improved multi-slot type electrodes for the beam extraction system and obtained stable beams with the uniformity of below 3%. In BF{sub 3} plasmas, several undesirable metal fluorides are produced in the plasma chamber and deposited on the electrode system, which cause glitches and poor beam uniformity. We introduce several cleaning methods.

  9. Solar heat collecting panel assembly and method for covering structures

    SciTech Connect (OSTI)

    Brown, D.P.; Jones, I.R.; Vurpillat, V.V.

    1984-06-19

    Panels are formed and mounted in an exterior structure covering assemblage exteriorly simulating a standard exterior structure covering panel assemblage while simultaneously providing a fluid flow network within the panel assemblage for solar heat collection while not substantially disturbing the standard panel assemblage simulation. Generally, the panels have a relatively thin, freely heat transferring exterior layer portion with directly underlying fluid flow channels interconnected between panels for the overall assemblage fluid flow network without substantially disturbing the exterior standard panel simulation. The panels may be formed to simulate any standard roofing or siding panels and the solar heat collecting assemblage may be integrated with adjacent panel assemblages not including the solar heat collecting features with the overall assemblage still maintaining the same standard panel simulation.

  10. Robust estimation procedure in panel data model

    SciTech Connect (OSTI)

    Shariff, Nurul Sima Mohamad; Hamzah, Nor Aishah

    2014-06-19

    The panel data modeling has received a great attention in econometric research recently. This is due to the availability of data sources and the interest to study cross sections of individuals observed over time. However, the problems may arise in modeling the panel in the presence of cross sectional dependence and outliers. Even though there are few methods that take into consideration the presence of cross sectional dependence in the panel, the methods may provide inconsistent parameter estimates and inferences when outliers occur in the panel. As such, an alternative method that is robust to outliers and cross sectional dependence is introduced in this paper. The properties and construction of the confidence interval for the parameter estimates are also considered in this paper. The robustness of the procedure is investigated and comparisons are made to the existing method via simulation studies. Our results have shown that robust approach is able to produce an accurate and reliable parameter estimates under the condition considered.

  11. Walk-In Panels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    File Walk-In Panels -- v1.0 More Documents & Publications Metal Halide Lamp Ballasts and Fixtures Refrigerators and Refrigerator-Freezers (Appendix A1 after May 2, 2011) Automatic ...

  12. Women in STEM Panel @Mesa Public Library

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Panel @Mesa Public Library WHEN: Oct 15, 2015 7:00 PM - Feb 12, 2015 8:30 PM WHERE: Mesa Public Library 2400 Central Ave, Los Alamos, NM 87544 SPEAKER: Nicole-Lloyd-Ronning, Teri...

  13. Fabric panel clean change-out frame

    DOE Patents [OSTI]

    Brown, Ronald M.

    1995-01-31

    A fabric panel clean change-out frame, for use on a containment structure having rigid walls, is formed of a compression frame and a closure panel. The frame is formed of elongated spacers, each carrying a plurality of closely spaced flat springs, and each having a hooked lip extending on the side of the spring facing the spacer. The closure panel is includes a perimeter frame formed of flexible, wedge-shaped frame members that are receivable under the springs to deflect the hooked lips. A groove on the flexible frame members engages the hooked lips and locks the frame members in place under the springs. A flexible fabric panel is connected to the flexible frame members and closes its center.

  14. Neutron shielding panels for reactor pressure vessels

    DOE Patents [OSTI]

    Singleton, Norman R.

    2011-11-22

    In a nuclear reactor neutron panels varying in thickness in the circumferential direction are disposed at spaced circumferential locations around the reactor core so that the greatest radial thickness is at the point of highest fluence with lesser thicknesses at adjacent locations where the fluence level is lower. The neutron panels are disposed between the core barrel and the interior of the reactor vessel to maintain radiation exposure to the vessel within acceptable limits.

  15. Panel Session III: Innovation and Coordination

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lessons Learned for Hydrogen Panel Session III: Innovation Panel Session III: Innovation and Coordination and Coordination ______________________________ Stefan Unnasch Life Cycle Associates 3 April 2008 2 Hydrogen Vision Life Cycle Associates 3 Hydrogen Infrastructure Today Life Cycle Associates Source: Weinert, J. X., et al.. (2005). CA Hydrogen Highway Network Blueprint Plan, Economics Report 4 Innovation and Coordination Life Cycle Associates Innovation Coordination ☯ Slow Fast Cars Codes

  16. Flat panel ferroelectric electron emission display system

    DOE Patents [OSTI]

    Sampayan, Stephen E.; Orvis, William J.; Caporaso, George J.; Wieskamp, Ted F.

    1996-01-01

    A device which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density.

  17. Flat panel ferroelectric electron emission display system

    DOE Patents [OSTI]

    Sampayan, S.E.; Orvis, W.J.; Caporaso, G.J.; Wieskamp, T.F.

    1996-04-16

    A device is disclosed which can produce a bright, raster scanned or non-raster scanned image from a flat panel. Unlike many flat panel technologies, this device does not require ambient light or auxiliary illumination for viewing the image. Rather, this device relies on electrons emitted from a ferroelectric emitter impinging on a phosphor. This device takes advantage of a new electron emitter technology which emits electrons with significant kinetic energy and beam current density. 6 figs.

  18. Hydrogen Safety Panel | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Panel Hydrogen Safety Panel 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. scs_07_weiner.pdf (1.41 MB) More Documents & Publications Hydrogen Safety: First Responder Education Hydrogen Safety Knowledge Tools NanoCapillary Network Proton Conducting Membranes for High Temperature Hydrogen/Air Fuel Cells

  19. Design of panel heating and cooling systems

    SciTech Connect (OSTI)

    Bohle, J.; Klan, H.

    2000-07-01

    Panel heating and cooling systems use controlled temperature surfaces in the floor, walls, or ceiling of a conditioned space. The temperature is maintained by a circulating fluid through a circuit embedded in the panel. Heat transfer occurs by radiation and convection to or from a room. The performance of these systems may be determined by design calculations or testing. Thermal testing and system analysis by experiments are costly and inefficient. For different closed panel systems, finite element-based models and programs were developed by which temperature distribution in the construction, interdependence between performance and mean carrier fluid temperature, panel surface temperature, and room temperature can be calculated. One single power function product of all relevant parameters has been derived as an algorithm for performance calculations of panel heating and cooling systems, which can be adapted for other systems. Findings have been verified by experiment for floor heating panels with best results. These basic equations provided the design standards for German Standard DIN 4725, ''Thermal Output of Floor Heating'', which has been adopted as European Standard EN 1264. Finite element method calculation results were also compared with results from design calculations based on the ASHRAE method.

  20. Electrohydraulic Forming of Near Net Shape Automotive Panels

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Development of Advancing Automotive Panel Manufacturing for Increased Energy and Material Savings

  1. Deep Blue No. 1-A Slimhole Geothermal Discovery at Blue Mountain...

    Open Energy Info (EERE)

    drilling of Deep Blue No.1. This well was sited on the basis of proximity to numerous gold exploration holes that indicated thermal water, high temperature gradients recorded in...

  2. BlueSol Solar Energy | Open Energy Information

    Open Energy Info (EERE)

    BlueSol Solar Energy Jump to: navigation, search Name: BlueSol - Solar Energy Place: Sao Paulo, Sao Paulo, Brazil Zip: 04551-060 Sector: Solar Product: Sao Paulo-based sole...

  3. Blue Breezes I & II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Community Wind Facility Status In Service Owner John Deere Wind Energy Developer Dan MooreJohn Deere Wind Energy Energy Purchaser City of Blue Earth Location City of Blue Earth...

  4. Blue Ridge Elec Member Corp | Open Energy Information

    Open Energy Info (EERE)

    Blue Ridge Elec Member Corp Place: North Carolina Phone Number: 1-800-448-2383 Website: www.blueridgeemc.com Twitter: @blueridgeemc Facebook: https:www.facebook.comBlueRidgeEMC...

  5. Blue Grass Energy Coop Corp | Open Energy Information

    Open Energy Info (EERE)

    Grass Energy Coop Corp Jump to: navigation, search Name: Blue Grass Energy Coop Corp Place: Kentucky Phone Number: 888-546-4243 Website: www.bgenergy.com Twitter: @BlueGrassEnergy...

  6. Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    of at least 150C for the inferred geothermal reservoir. References Brian D. Fairbank, Kim V. Niggemann (2004) Deep Blue No.1-A Slimhole Geothermal Discovery At Blue Mountain,...

  7. Blue Bell, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    stub. You can help OpenEI by expanding it. Blue Bell is a census-designated place in Montgomery County, Pennsylvania.1 Registered Energy Companies in Blue Bell, Pennsylvania C D...

  8. Blue Sky Green Field Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Green Field Wind Farm Jump to: navigation, search Name Blue Sky Green Field Wind Farm Facility Blue Sky Green Field Wind Farm Sector Wind energy Facility Type Commercial Scale Wind...

  9. BlueEarth Biofuels LLC | Open Energy Information

    Open Energy Info (EERE)

    BlueEarth Biofuels LLC Jump to: navigation, search Name: BlueEarth Biofuels LLC Place: Hawaii Zip: 96813 Sector: Renewable Energy Product: Developer of power and renewable-energy...

  10. Interested Parties - BlueGreen Alliance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BlueGreen Alliance Interested Parties - BlueGreen Alliance 09-25-10_Section_136_ATVM.pdf (111.58 KB) More Documents & Publications Interested Parties - MEMA Interested Parties - United Auto Workers Interested Parties - Chrystler

  11. Aeromagnetic Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique Aeromagnetic Survey Activity...

  12. Leading the Charge: Jana Ganion Advances Blue Lake Rancheria's Climate

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Action Agenda | Department of Energy Jana Ganion Advances Blue Lake Rancheria's Climate Action Agenda Leading the Charge: Jana Ganion Advances Blue Lake Rancheria's Climate Action Agenda February 27, 2015 - 10:38am Addthis Jana Ganion is the Energy Director for the Blue Lake Rancheria. Jana Ganion is the Energy Director for the Blue Lake Rancheria. Change doesn't happen on its own. It's led by dedicated and passionate people who are committed to empowering Indian Country to energize future

  13. Making Fuel with Solar Panels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Making Fuel with Solar Panels Making Fuel with Solar Panels Making Fuel with Solar Panels This photograph features the Sacramento Municipal Utility District (SMUD) solar-powered hydrogen vehicle fueling station that opened on April 1, 2008. As the solar panels make electricity, an electrolyzer at the station will use that energy to separate water into hydrogen to make fuel for hydrogen-powered vehicles. When not being used to produce hydrogen for vehicles, the power produced by the panels will

  14. The Atomic Safety and Licensing Board Panel

    SciTech Connect (OSTI)

    1998-03-01

    Through the Atomic Energy Act, Congress made is possible for the public to get a full and fair hearing on civilian nuclear matters. Individuals who are directly affected by any licensing action involving a facility producing or utilizing nuclear materials may participate in a formal hearing, on the record, before independent judges on the Atomic Safety and Licensing Board Panel (ASLBP or Panel). Frequently, in deciding whether a license, permit, amendment, or extension should be granted to a particular applicant, the Panel members must be more than mere umpires. If appropriate, they are authorized to go beyond the issues the parties place before them in order to identify, explore, and resolve significant questions involving threats to the public health and safety that come to a board`s attention during the proceedings. This brochure explains the purpose of the panel. Also addressed are: type of hearing handled; method of public participation; formality of hearings; high-level waste; other panel responsibilities and litigation technology.

  15. The influence of microstructure on magnetic properties of nanocrystalline Fe-Pt-Nb-B permanent magnet ribbons

    SciTech Connect (OSTI)

    Randrianantoandro, N.; Greneche, J. M.; Crisan, A. D.; Crisan, O.; Marcin, J.; Kovac, J.; Hanko, J.; Skorvanek, I.; Svec, P.; Chrobak, A.

    2010-11-15

    A FePt-based hard-magnetic nanocomposite of exchange spring type was prepared by isothermal annealing of melt-spun Fe{sub 52}Pt{sub 28}Nb{sub 2}B{sub 18} (atomic percent) ribbons. The relationship between microstructure and magnetic properties was investigated by qualitative and quantitative structural analysis based on the x-ray diffraction, transmission electron microscopy, and {sup 57}Fe Moessbauer spectrometry on one hand and the superconducting quantum interference device magnetometry on the other hand. The microstructure consists of L1{sub 0}-FePt hard-magnetic grains (15-45 nm in diameter) dispersed in a soft magnetic medium composed by A1 FePt, Fe{sub 2}B, and boron-rich (FeB)PtNb remainder phase. The ribbons annealed at 700 deg. C for 1 h exhibit promising hard-magnetic properties at room temperature: M{sub r}/M{sub s}=0.69; H{sub c}=820 kA/m and (BH){sub max}=70 kJ/m{sup 3}. Strong exchange coupling between hard and soft magnetic phases was demonstrated by a smooth demagnetizing curve and positive {delta}M-peak in the Henkel plot. The magnetic properties measured from 5 to 750 K reveals that the hard characteristics remains rather stable up to 550 K, indicating a good prospect for the use of these permanent magnets in a wide temperature range.

  16. Mechanically stable, high-aspect-ratio, multifilar, wound, ribbon-type conductor and method for manufacturing same

    DOE Patents [OSTI]

    Cottingham, J.G.

    1982-03-15

    A mechanically stable, wound, multifilar, ribbon-type conductor is described having a cross-sectional aspect ratio which may be greater than 12:1, comprising a plurality of conductive strands wound to form a flattened helix containing a plastic strip into which the strands have been pressed so as to form a bond between the strip and the strands. The bond mechanically stabilizes the conductor under tension, preventing it from collapsing into a tubular configuration. In preferred embodiments the plastic strip may be polytetrafluoroethylene, and the conductive strands may be formed from a superconductive material. Conductors in accordance with the present invention may be manufactured by winding a plurality of conductive strands around a hollow mandrel; the cross-section of a hollow mandrel; the cross-section of the mandrel continuously varying from substnatially circular to a high aspect ratio elipse while maintaining a constant circumference. The wound conductive strands are drawn from the mandrel as a multifilar helix while simultaneously a plastic strip is fed through the hollow mandrel so that it is contained within the helix as it is withdrawn from the mandrel. The helical conductor is then compressed into a ribbon-like form and the strands are bonded to the plastic strip by a combination of heat and pressure.

  17. Optical panel system including stackable waveguides

    DOE Patents [OSTI]

    DeSanto, Leonard; Veligdan, James T.

    2007-03-06

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  18. Optical panel system including stackable waveguides

    DOE Patents [OSTI]

    DeSanto, Leonard; Veligdan, James T.

    2007-11-20

    An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

  19. Flat or curved thin optical display panel

    DOE Patents [OSTI]

    Veligdan, James T.

    1995-01-10

    An optical panel 10 includes a plurality of waveguides 12 stacked together, with each waveguide 12 having a first end 12a and an opposite second end 12b. The first ends 12a collectively define a first face 16, and the second ends 12b collectively define a second face 18 of the panel 10. The second face 18 is disposed at an acute face angle relative to the waveguides 12 to provide a panel 10 which is relatively thin compared to the height of the second face. In an exemplary embodiment for use in a projection TV, the first face 16 is substantially smaller in height than the second face 18 and receives a TV image, with the second face 18 defining a screen for viewing the image enlarged.

  20. Pantex Falling Man - Independent Review Panel Report.

    SciTech Connect (OSTI)

    Bertolini, Louis; Brannon, Nathan; Olson, Jared; Price, Bernard; Wardle, Robert; Steinzig, Mike; Winfield, Michael

    2014-11-01

    Consolidated Nuclear Security (CNS) Pantex took the initiative to organize a Review Panel of subject matter experts to independently assess the adequacy of the Pantex Tripping Man Analysis methodology. The purpose of this report is to capture the details of the assessment including the scope, approach, results, and detailed Appendices. Along with the assessment of the analysis methodology, the panel evaluated the adequacy with which the methodology was applied as well as congruence with Department of Energy (DOE) standards 3009 and 3016. The approach included the review of relevant documentation, interactive discussion with Pantex staff, and the iterative process of evaluating critical lines of inquiry.

  1. The Penetrant System Monitoring (PSM) panel: Its use and limitations

    SciTech Connect (OSTI)

    Robinson, S.J. [Sherwin Inc., South Gate, CA (United States)

    1996-12-31

    In the last several years, the Penetrant System Monitoring (PSM) panel has been increasingly used for purposes for which it was never intended. Intended originally for use by penetrant system operators, the PSM panel is increasingly being used by material control departments and by process engineering departments. This paper`s purpose is to describe and give guidance concerning the proper use and maintenance of PSM panels. It recounts the evolution of penetrant system test panels, and compares how the different types of panels are made. It discusses the limitations of the PSM panel as used by the material control department, the process engineering department, and the production line.

  2. Energy efficient building structure and panel therefor

    SciTech Connect (OSTI)

    Carroll, Th.J.; Paisley, J.K.

    1984-08-28

    A building structure is constructed from a plurality of sheathed, foam cored structural panels which are adapted to receive solar energy conversion or heat storage devices and are adapted to be connected in an air flow loop to provide integral heating and/or cooling systems for the building structure.

  3. MOCK OBSERVATIONS OF BLUE STRAGGLERS IN GLOBULAR CLUSTER MODELS

    SciTech Connect (OSTI)

    Sills, Alison; Glebbeek, Evert; Chatterjee, Sourav; Rasio, Frederic A. E-mail: e.glebbeek@astro.ru.nl E-mail: rasio@northwestern.edu

    2013-11-10

    We created artificial color-magnitude diagrams of Monte Carlo dynamical models of globular clusters and then used observational methods to determine the number of blue stragglers in those clusters. We compared these blue stragglers to various cluster properties, mimicking work that has been done for blue stragglers in Milky Way globular clusters to determine the dominant formation mechanism(s) of this unusual stellar population. We find that a mass-based prescription for selecting blue stragglers will select approximately twice as many blue stragglers than a selection criterion that was developed for observations of real clusters. However, the two numbers of blue stragglers are well-correlated, so either selection criterion can be used to characterize the blue straggler population of a cluster. We confirm previous results that the simplified prescription for the evolution of a collision or merger product in the BSE code overestimates their lifetimes. We show that our model blue stragglers follow similar trends with cluster properties (core mass, binary fraction, total mass, collision rate) as the true Milky Way blue stragglers as long as we restrict ourselves to model clusters with an initial binary fraction higher than 5%. We also show that, in contrast to earlier work, the number of blue stragglers in the cluster core does have a weak dependence on the collisional parameter ? in both our models and in Milky Way globular clusters.

  4. Green Lands Blue Water 2014 Fall Conference

    Broader source: Energy.gov [DOE]

    The Green Lands Blue Water 2014 Fall Conference will be held from November 19–20, 2014, at the Richland Community College in Decatur, Illinois. The event will focus on bioenergy and sustainable agriculture and explore topics ranging from logistics, energy conversion technologies, and markets for grass biomass. BETO Sustainability Program Technology Manager Kristen Johnson will be speaking about the Energy Department’s perspective on sustainable bioenergy landscapes and will focus on BETO’s recent work with landscape design. The conference will be November 19–20 only. On November 18, participants may choose to participate in a pre-conference field tour.

  5. Blue, green, orange, and red upconversion laser

    DOE Patents [OSTI]

    Xie, Ping; Gosnell, Timothy R.

    1998-01-01

    A laser for outputting visible light at the wavelengths of blue, green, orange and red light. This is accomplished through the doping of a substrate, such as an optical fiber or waveguide, with Pr.sup.3+ ions and Yb.sup.3+ ions. A light pump such as a diode laser is used to excite these ions into energy states which will produce lasing at the desired wavelengths. Tuning elements such as prisms and gratings can be employed to select desired wavelengths for output.

  6. Blue, green, orange, and red upconversion laser

    DOE Patents [OSTI]

    Xie, P.; Gosnell, T.R.

    1998-09-08

    A laser is disclosed for outputting visible light at the wavelengths of blue, green, orange and red light. This is accomplished through the doping of a substrate, such as an optical fiber or waveguide, with Pr{sup 3+} ions and Yb{sup 3+} ions. A light pump such as a diode laser is used to excite these ions into energy states which will produce lasing at the desired wavelengths. Tuning elements such as prisms and gratings can be employed to select desired wavelengths for output. 11 figs.

  7. Blue running of the primordial tensor spectrum

    SciTech Connect (OSTI)

    Gong, Jinn-Ouk

    2014-07-01

    We examine the possibility of positive spectral index of the power spectrum of the primordial tensor perturbation produced during inflation in the light of the detection of the B-mode polarization by the BICEP2 collaboration. We find a blue tilt is in general possible when the slow-roll parameter decays rapidly. We present two known examples in which a positive spectral index for the tensor power spectrum can be obtained. We also briefly discuss other consistency tests for further studies on inflationary dynamics.

  8. Blue Ic&and~ Illbole D

    Office of Legacy Management (LM)

    copies, Series.$L. .To: Vapofler 0orp&xtion 'i~~67~VkloemeLi Avenue , Subco$yactor Blue Ic&and~ Illbole D e a r 8ire'8,,. .' .' .'. You are hereby notified that by reason ofmm1 e&r&im, a certain subcontract b&ween you and The IJnitiereity of Chicago dated Awl1 1. 1944 , and bearing descriptive number. above indicated, is terminated as of th&Ottday ofDeoanber , 19@$. f,ccording to our records, our flnano~al ok$igatlon to you IE 87.696.40i. ,~ 1 Dated at

  9. BlueGene/Q Optimization Bob Walkup

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BlueGene/Q Optimization Bob Walkup walkup@us.ibm.com 914-945-1512 Performance : what to expect Using IBM XL compilers A case study from SC13 Aternative compilers for BGQ Libraries that can help performance OpenMP and MPI Some Useful Properties of BG/Q You normally get dedicated resources for computation and communication (not counting the file-system). Memory access is uniform ... no worrying about NUMA. Processes and threads are bound by CNK (compute node kernel). No context switches => very

  10. Sandia National Laboratories: Better flat-panel displays

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facebook Twitter YouTube Flickr RSS News Better, brighter, cheaper flat-panel displays By ... colors and better images for flat-panel displays built from less expensive ...

  11. Microsoft Word - Minutes from October 2009 seismic LL panel 11...

    Office of Environmental Management (EM)

    lessons-learned panel at the DOE Forrestal Building on October 6, 2009. This panel was originally commissioned by the CNS in August 2007, and it meets approximately twice per year. ...

  12. Specialized control panels designed for on-site compression of...

    Office of Scientific and Technical Information (OSTI)

    Specialized control panels designed for on-site compression of natural gas Citation Details In-Document Search Title: Specialized control panels designed for on-site compression of ...

  13. Solar collector panels (process-method). Rainwater collection and storage

    SciTech Connect (OSTI)

    Mowery, J.W.

    1981-10-15

    A process for producing panels for solar heating of potable water is described. The panels have PVC tubing flat-coiled into square or rectangular shapes. Also described is a cistern for collecting and storing rainwater. (LEW)

  14. Panel discussion to explore transitions in women's careers on...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Panel discussion to explore transitions in women's careers Panel discussion to explore transitions in women's careers on May 16 The event is titled "If I Only Knew Then What I Know ...

  15. Science on the Hill: Turning windows into solar panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science on the Hill: Turning windows into solar panels Turning windows into solar panels Working with quantum dots, researchers achieve a breakthrough in solar-concentrating technology that can turn windows into electric generators. February 7, 2016 solar panel windows The luminescent solar concentrator could turn any window into a daytime power source. Science on the Hill: Turning windows into solar panels Sunlight is abundant, free and for all practical purposes, eternal. Harvesting that light

  16. Memorandum, Safeguards & Security Policy Panels - February 15, 2008 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Memorandum, Safeguards & Security Policy Panels - February 15, 2008 Memorandum, Safeguards & Security Policy Panels - February 15, 2008 February 15, 2008 As outlined in the attached HSS memo, dated December 3,2007, subject: Safeguards and Security Policy Panels, the HSS Office of Security Policy is establishing several new policy panels that will create new opportunities for communication and will include those current active groups that are now effectively

  17. WIPP Concludes Zone Recovery Activities for Panel 7 Disposal Pathway

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    24, 2015 WIPP Concludes Zone Recovery Activities for Panel 7 Disposal Pathway After months of catch-up rock bolting and contamination mitigation, zone recovery activities along the pathway to Panel 7 have been completed. Panel 7, which consists of seven disposal rooms (see map below), will be the active disposal area when waste emplacement activities resume. Initial closure of Panel 7 Room 7 was completed in May 2015. Although the pathway has been established, a significant number of activities,

  18. Panel: If I Only Knew Then What I Know Now

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    May » Women's Panel Discussion and Networking Event Panel: If I Only Knew Then What I Know Now WHEN: May 16, 2016 2:30 PM - 5:00 PM WHERE: University of New Mexico-Los Alamos, Student Center Lecture Hall 4000 University Drive, Los Alamos CONTACT: Veronika Mocko CATEGORY: Community INTERNAL: Calendar Login Event Description The LANL Women's Group is hosting a career panel discussion and networking event exploring transitions that women face throughout their careers. Two panel speakers (one

  19. Solar Panels Hit Energy Milestone For Potawatomi and Milwaukee | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Panels Hit Energy Milestone For Potawatomi and Milwaukee Solar Panels Hit Energy Milestone For Potawatomi and Milwaukee October 26, 2011 - 10:44am Addthis The Forest County Potawatomi Tribe finishes installing solar panels on a Milwaukee, Wisconsin, administration building. | Photo courtesy of the Forest County Potawatomi Tribe The Forest County Potawatomi Tribe finishes installing solar panels on a Milwaukee, Wisconsin, administration building. | Photo courtesy of the Forest

  20. Solar Panel Design Ideas for Your Home | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Panel Design Ideas for Your Home Solar Panel Design Ideas for Your Home June 8, 2016 - 5:08pm Addthis These examples of building integrated photovoltaic panels are like solar eye candy. All images from U.S. Department of Energy Solar Decathlon These examples of building integrated photovoltaic panels are like solar eye candy. All images from U.S. Department of Energy Solar Decathlon Alexis Powers Communications Specialist at the National Renewable Energy Laboratory Solar is not just for

  1. Study of Alternative Approaches for Transite Panel Removal | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Study of Alternative Approaches for Transite Panel Removal Study of Alternative Approaches for Transite Panel Removal Bechtel Jacobs Company LLC (BJC) assembled an experienced team from both sites to evaluate both the manual and mechanical methods of transite panel removal. Study of Alternative Approaches for Transite Panel Removal (196.34 KB) More Documents & Publications Type B Accident Investigation, Subcontractor Employee Personal Protective Equipment Ignition Incident on

  2. Climate Action Champions: Blue Lake Rancheria Tribe, CA | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Blue Lake Rancheria Tribe, CA Climate Action Champions: Blue Lake Rancheria Tribe, CA The Blue Lake Rancheria, California, a federally recognized Native American tribal Government and community, is located on over 100 acres of land spanning the scenic Mad River in northwestern California. In its operational strategy, the Tribe has implemented the ‘seven generations’ philosophy, where actions taken today will have a positive impact for seven generations to come. This results

  3. Bradbury Science Museum partnering in national Blue Star Museums program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blue Star Museums program Bradbury Science Museum partnering in national Blue Star Museums program Blue Star Museums program to host active duty military personnel and their families from Memorial Day, May 27, through Labor Day, Sept. 2. May 22, 2013 The museum is open daily except Thanksgiving, Christmas and New Year's Day. The museum is open daily except Thanksgiving, Christmas and New Year's Day. Contact Steve Sandoval Communications Office (505) 665-9206 Email The museum already has a

  4. Congressional panel makes recommendations on belt safety

    SciTech Connect (OSTI)

    Fiscor, S.

    2007-12-15

    The Mine Improvement and New Emergency Response Act of 2006 (MINER Act) called for a Technical Study Panel to present a review and make recommendations on the use of belt air and the composition and fire retardant properties of belt materials in underground coal mining. In October 2007 the Panel released 20 recommendations publicly. These are presented in the article. Many recommendations encouraged the MSHA to enforce existing laws of maintenance and fire protection or example more vigorously. Maybe the biggest change recommended was that the industry should adopt the Belt Evaluation Laboratory Test (BELT) standard proposed in 1992. Another important recommendation was one that would help eliminate hazards associated with point feeding. 1 photo.

  5. Bexar County Parking Garage Photovoltaic Panels

    SciTech Connect (OSTI)

    Golda Weir

    2012-01-23

    The main objective of the Bexar County Parking Garage Photovoltaic (PV) Panel project is to install a PV System that will promote the use of renewable energy. This project will also help sustain Bexar County ongoing greenhouse gas emissions reduction and energy efficiency goals. The scope of this project includes the installation of a 100-kW system on the top level of a new 236,285 square feet parking garage. The PV system consists of 420 solar panels that covers 7,200 square feet and is tied into the electric-grid. It provides electricity to the office area located within the garage. The estimated annual electricity production of the PV system is 147,000 kWh per year.

  6. Core Holes At Blue Mountain Geothermal Area (Fairbank & Niggemann...

    Open Energy Info (EERE)

    Activity Details Location Blue Mountain Geothermal Area Exploration Technique Core Holes Activity Date 2002 - 2004 Usefulness useful DOE-funding Unknown Exploration Basis Cores...

  7. Blue Spark Technologies formerly Thin Battery Technologies Inc...

    Open Energy Info (EERE)

    Spark Technologies formerly Thin Battery Technologies Inc Jump to: navigation, search Name: Blue Spark Technologies (formerly Thin Battery Technologies Inc.) Place: Westlake, Ohio...

  8. Subject: Ames Blue Alert - X-ray Shutter Maintenance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ames Blue Alert - X-ray Shutter Maintenance Statement: This lesson learned involves an ... 4. Follow the manufacturers suggested maintenance schedule. 5. Follow the standard ...

  9. Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Exploration Basis Thermal gradient holes were drilled in an effort to determine the feasibility of commercial geothermal energy generation at Blue Mountain Notes Ten temperature...

  10. Blue Crane Holdings Pvt Ltd | Open Energy Information

    Open Energy Info (EERE)

    Crane Holdings Pvt Ltd Jump to: navigation, search Name: Blue Crane Holdings Pvt. Ltd. Place: Mumbai, Maharashtra, India Zip: 400023 Sector: Efficiency, Solar, Wind energy Product:...

  11. Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity:...

  12. Ground Gravity Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Gravity Survey At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity Details...

  13. Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature...

    Open Energy Info (EERE)

    Ranch Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature Geothermal Facility Facility...

  14. Geothermometry At Blue Mountain Geothermal Area (Casteel, Et...

    Open Energy Info (EERE)

    Details Location Blue Mountain Geothermal Area Exploration Technique Geothermometry Activity Date 2010 - 2010 Usefulness useful DOE-funding Unknown Exploration Basis A water...

  15. Blue Lake Plant Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    National Map Retrieved from "http:en.openei.orgwindex.php?titleBlueLakePlantBiomassFacility&oldid397215" Feedback Contact needs updating Image needs updating...

  16. Title: Ames Blue Alert- Wood Cabinet Falls Apart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ames Blue Alert- Wood Cabinet Falls Apart Lessons Learned Statement- Cumulative damage can cause a loss of structural integrity. When furnishings are repeatedly exposed to water,...

  17. Reflection Survey At Blue Mountain Geothermal Area (Melosh, Et...

    Open Energy Info (EERE)

    model of blue mountain. References Glenn Melosh, William Cumming, John Casteel, Kim Niggemann, Brian Fairbank (2010) Seismic Reflection Data and Conceptual Models for...

  18. Geophysical Setting of the Blue Mountain Geothermal Area, North...

    Open Energy Info (EERE)

    the location of the geothermal prospect and the spatially associated epithermal gold depositon the western flank of Blue Mountain. Other epithermal gold deposits in...

  19. Flow Test At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Flow Test At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity...

  20. Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann...

    Open Energy Info (EERE)

    to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann, 2004) Exploration Activity...

  1. Blue Sky Energy Inc BSE | Open Energy Information

    Open Energy Info (EERE)

    Energy Inc BSE Jump to: navigation, search Name: Blue Sky Energy Inc (BSE) Place: Vista, California Zip: 92081 Product: MPPT (Maximum Power Point Tracking) technology. Own a...

  2. Blue Hill Investment Partners LLC | Open Energy Information

    Open Energy Info (EERE)

    Hill Investment Partners LLC Jump to: navigation, search Name: Blue Hill Investment Partners LLC Place: Philadelphia, Pennsylvania Zip: PA 19118 Sector: Renewable Energy Product: A...

  3. Direct-Current Resistivity Survey At Blue Mountain Area (Fairbank...

    Open Energy Info (EERE)

    have been conducted specifically for the geothermal program at Blue Mountain include a self-potential (SP) survey, and additional IPelectrical resistivity traversing. These...

  4. Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Ross...

    Open Energy Info (EERE)

    R. Langton, Brian D. Fairbank, Claron E. Mackelprang (1999) Electrical Resistivity and Self-Potential Surveys Blue Mountain Geothermal Area, Nevada Additional References...

  5. Geothermal Drilling Success at Blue Mountain, Nevada | Open Energy...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal Drilling Success at Blue Mountain, Nevada Abstract Exploration in a blind prospect...

  6. Blue Star Energy Services (Pennsylvania) | Open Energy Information

    Open Energy Info (EERE)

    Star Energy Services (Pennsylvania) Jump to: navigation, search Name: Blue Star Energy Services Place: Pennsylvania Website: www.bluestarenergy.com Twitter: @keealliance Facebook:...

  7. Blue Star Energy Services (Maryland) | Open Energy Information

    Open Energy Info (EERE)

    Maryland) Jump to: navigation, search Name: Blue Star Energy Services Place: Maryland References: EIA Form EIA-861 Final Data File for 2010 - File220101 EIA Form 861 Data...

  8. Blue Gene/Q Network Performance Counters Monitoring Library

    Energy Science and Technology Software Center (OSTI)

    2015-03-12

    BGQNCL is a library to monitor and record network performance counters on the 5D torus interconnection network of IBM's Blue Gene/Q platform.

  9. Austin Using Green Innovation to Beat the Utility Blues | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Using Green Innovation to Beat the Utility Blues Austin Using Green Innovation to Beat the ... the treatment processes into clean energy that can power public infrastructure facilities. ...

  10. Presentation to the NSF Review Panel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Introduction to Current & Prior Studies of the DOE Laboratories Mark Taylor Susannah Howieson Julian Zhu July 18, 2014 Current Studies * Congressional Advisory Panel on the Governance of the Nuclear Security Enterprise ("Augustine/Mies Report") - Shared panelists: Norman Augustine and TJ Glauthier * National Academy of Sciences (NAS) Assessment of the Governance Structure of the NNSA National Security Laboratories ("NAS I - Governance") - Shared panelists: Richard Meserve

  11. DOE Focus Areas and Panel Introduction

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Focus Areas and Panel Introduction DOE SSL Program Connected Lighting Meeting November 16, 2015 2 The emergence of Connected Lighting * Solid-State Lighting * Significant technology trends driving performance improvements and cost reductions - Computing - Mobile - Intelligence (i.e. microcontrollers), network interfaces, and sensors * Cloud storage, computing, analytics as a service * IoT focus on systems and data 1) Controllable and Intelligent SSL Source 2) Wired, Wireless Network

  12. Industry Research for Pipeline Systems Panel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Council International, Inc. DOE Natural Gas Infrastructure R&D and Methane Emissions Mitigation Workshop -Industry Research for Pipeline Systems Panel Mike Whelan Director, Research Operations November 12, 2014 2 www.prci.org Pipeline Research Council Int'l. Overview  Founded in 1952 - Current Membership  39 Pipelines, over 350,000 miles of transmission pipe * Natural Gas and Hazardous Liquids Pipelines * 27 members are North American based - Remainder: Europe, Brazil, China,

  13. Implementation of Safeguards and Security Policy Panels

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5,2008 MEMORANDUM FOR DISTRIBUTION FROM URITY OFFICER AND SECURITY SUBJECT: Implementation of Safeguards and Security Policy Panels The Office of Health, Safety and Security (HSS) recognizes the importance of well- conceived strategies and policies to support and communicate the security posture of the Department. In order for our security policies to properly reflect and enable Department of Energy corporate strategies, early and frequent communication between policy makers and end users is

  14. Thin film photovoltaic panel and method

    SciTech Connect (OSTI)

    Ackerman, B.; Albright, S.P.; Jordan, J.F.

    1991-06-11

    This patent describes an improved stability photovoltaic panel. It comprises photovoltaic cells each having polycrystalline thin film layers, each of the thin film layers respectively deposited on a common vitreous substrate for allowing light to pass therethrough to reach a photovoltaic heterojunction formed by at least two of the thin film layers, at least one of the film layers forming the photovoltaic heterojunction for each of the photovoltaic cells, each of the photovoltaic cells lying within a plane substantially parallel to an interior planar surface of the vitreous substrate, each of the photovoltaic cells being connected electrically in series to pass electrical current from the photovoltaic panel, a pliable sheet material backcap opposite the vitreous substrate with respect to the photovoltaic cells and spaced from the photovoltaic cells so as to form a substantially planar spacing between the photovoltaic cells and an interior surface of the sheet material backcap, a perimeter portion of the sheet material backcap having a bend for positioning an edge strip of the sheet material backcap spaced from the interior surface of the backcap to form the planar spacing, the edge strip forming a planar surface parallel with a sealingly engaging the vitreous substrate for forming a fluid-tight seal with the vitreous substrate about the perimeter of the photovoltaic cells for protecting the photovoltaic cells from elements exterior of the photovoltaic panel, and a selected desiccant filling substantially the planar spacing for preventing water vapor within the planar spacing from adversely affecting the photovoltaic cells.

  15. Small inlet optical panel and a method of making a small inlet optical panel

    SciTech Connect (OSTI)

    Veligdan, James T.; Slobodin, David

    2001-01-01

    An optical panel having a small inlet, and a method of making a small inlet optical panel, are disclosed, which optical panel includes a individually coating, stacking, and cutting a first plurality of stacked optical waveguides to form an outlet face body with an outlet face, individually coating, stacking, and cutting a second plurality of stacked optical waveguides to form an inlet face body with an inlet face, and connecting an optical coupling element to the first plurality and to the second plurality, wherein the optical coupling element redirects light along a parallel axis of the inlet face to a parallel axis of the outlet face. In the preferred embodiment of the present invention, the inlet face is disposed obliquely with and askew from the outlet face.

  16. Solar absorber panel, collector assembly and installation method

    SciTech Connect (OSTI)

    Spencer, D.L.

    1980-12-23

    A solar absorber panel assembly has a pair of substantially parallel plates sealed together at their perimeter. A raised integral header is formed in one of the plates. An external header is in fluid communication with the integral header and is spaced from and mechanically connected to the plates. A solar collector assembly includes hanger brackets mounted on an inclined support surface to engage and retain bodies of insulation material and solar absorber panels. The absorber panels are in side-by-side relation with relatively slidable slightly overlapping marginal portions. External headers on the absorber panels are connected together by slip-on resilient sleeves of silicone rubber. An enclosure having a transparent cover and a wall extending around a plurality of absorber panels and external headers is attached directly to the support surface independently of the hanger brackets and absorber panels. The cover is supported by cover support brackets mounted on the support surface and extending upwardly between panels, passing through openings formed by lateral recesses in the marginal portions of the absorber panels. A solar collector is installed by attaching hanger brackets to an inclined support surface, placing thermal insulation and absorber panels on the hanger brackets to prevent downward slipping movement, and enclosing the absorber panels with a cover which is transmissive of radiant solar energy.

  17. Method for molding threads in graphite panels

    SciTech Connect (OSTI)

    Short, W.W.; Spencer, C.

    1994-11-29

    A graphite panel with a hole having a damaged thread is repaired by drilling the hole to remove all of the thread and making a new hole of larger diameter. A bolt with a lubricated thread is placed in the new hole and the hole is packed with graphite cement to fill the hole and the thread on the bolt. The graphite cement is cured, and the bolt is unscrewed therefrom to leave a thread in the cement which is at least as strong as that of the original thread. 8 figures.

  18. DRUG TESING PANEL & CUTOFF CONCENTRATIONS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DRUG TESTING PANEL & CUTOFF CONCENTRATIONS Initial Test Analyte Initial Test Cutoff Concentration Confirmatory Test Analyte Confirmatory Test Cutoff Concentration Marijuana Metabolites 50 ng/mL THCA \1\ 15 ng/mL Cocaine Metabolites 150 ng/mL Benzoylecgonine 100 ng/mL Codeine 2000 ng/mL Opiate Metabolites: Codeine/Morphine \2\ 2000 ng/mL Morphine 2000 ng/mL 6-Acetylmorphine (Heroine) 10 ng/mL 6-Acetylmorphine 10 ng/mL Phencyclidine 25 ng/mL Phencyclidine 25 ng/mL Amphetamine 250 ng/mL 500

  19. Method for molding threads in graphite panels

    DOE Patents [OSTI]

    Short, William W.; Spencer, Cecil

    1994-01-01

    A graphite panel (10) with a hole (11) having a damaged thread (12) is repaired by drilling the hole (11) to remove all of the thread and make a new hole (13) of larger diameter. A bolt (14) with a lubricated thread (17) is placed in the new hole (13) and the hole (13) is packed with graphite cement (16) to fill the hole and the thread on the bolt. The graphite cement (16) is cured, and the bolt is unscrewed therefrom to leave a thread (20) in the cement (16) which is at least as strong as that of the original thread (12).

  20. REPOSITORY RECONFIGURATION OF PANELS 9 AND 10

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REPORT98.PDF REPORT98.PDF (43.02 KB) More Documents & Publications U.S. Department of Energy 2000 Annual Report U.S. Department of Energy 2002 Annual Report U.S. Department of Energy 2003 Annual Report

    2 NMED COMMENTS ITEM 2 - REPOSITORY RECONFIGURATION OF PANELS 9 AND 10 Page 1 of 9 Repository Reconfiguration 2-1: PMR Table 4.1.1, Pages B-2 and B-3 Provide redline strike out text revising "Final Waste Volume" column to "Final Waste Volume Disposed" and to revising

  1. Anomalous magnetic configuration of Mn{sub 2}NiAl ribbon and the role of hybridization in the martensitic transformation of Mn{sub 50}Ni{sub 50−x}Al{sub x} ribbons

    SciTech Connect (OSTI)

    Zhao, R. B.; Zhao, D. W.; Li, G. K.; Ma, L. E-mail: houdenglu@mail.hebtu.edu.cn; Zhen, C. M.; Hou, D. L. E-mail: houdenglu@mail.hebtu.edu.cn; Wang, W. H.; Liu, E. K.; Chen, J. L.; Wu, G. H.

    2014-12-08

    The magnetic configuration of Mn{sub 2}NiAl ribbon has been investigated. In contrast to Ni{sub 2}MnAl, the compound Mn{sub 2}NiAl with considerable disorder does exhibit ferromagnetism and, due to exchange interaction competition, both ferromagnetic and antiferromagnetic moment orientations can coexist between nearest neighbor Mn atoms. This is unexpected in Heusler alloys. Regarding the mechanism of the martensitic transformation in Mn{sub 50}Ni{sub 50−x}Al{sub x}, it is found that increasing the Al content results in an unusual change in the lattice constant, a decrease of the transformation entropy change, and enhancement of the calculated electron localization. These results indicate that the p-d covalent hybridization between Mn (or Ni) and Al atoms gradually increases at the expense of the d-d hybridization between Ni and Mn atoms. This leads to an increased stability of the austenite phase and a decrease of the martensitic transformation temperature. For 11 ≤ x ≤ 14, Mn{sub 50}Ni{sub 50−x}Al{sub x} ferromagnetic shape memory alloys are obtained.

  2. Light redirective display panel and a method of making a light redirective display panel

    SciTech Connect (OSTI)

    Veligdan, James T.

    2002-01-01

    An optical display panel which provides improved light intensity at a viewing angle by redirecting light emitting from the viewing screen, and a method of making a light redirective display panel, are disclosed. The panel includes an inlet face at one end for receiving light, and an outlet screen at an opposite end for displaying the light. The inlet face is defined at one end of a transparent body, which body may be formed by a plurality of waveguides, and the outlet screen is defined at an opposite end of the body. The screen includes light redirective elements at the outlet screen for re-directing light emitting from the outlet screen. The method includes stacking a plurality of glass sheets, with a layer of adhesive or epoxy between each sheet, curing the adhesive to form a stack, placing the stack against a saw and cutting the stack at two opposite ends to form a wedge-shaped panel having an inlet face and an outlet face, and forming at the outlet face a plurality of light redirective elements which direct light incident on the outlet face into a controlled light cone.

  3. Light Redirective Display Panel And A Method Of Making A Light Redirective Display Panel

    SciTech Connect (OSTI)

    Veligdan, James T.

    2005-07-26

    An optical display panel which provides improved light intensity at a viewing angle by redirecting light emitting from the viewing screen, and a method of making a light redirective display panel, are disclosed. The panel includes an inlet face at one end for receiving light, and an outlet screen at an opposite end for displaying the light. The inlet face is defined at one end of a transparent body, which body may be formed by a plurality of waveguides, and the outlet screen is defined at an opposite end of the body. The screen includes light redirective elements at the outlet screen for re-directing light emitting from the outlet screen. The method includes stacking a plurality of glass sheets, with a layer of adhesive or epoxy between each sheet, curing the adhesive to form a stack, placing the stack against a saw and cutting the stack at two opposite ends to form a wedge-shaped panel having an inlet face and an outlet face, and forming at the outlet face a plurality of light redirective elements which direct light incident on the outlet face into a controlled light cone.

  4. Method of fabricating a solar absorber panel

    SciTech Connect (OSTI)

    Severson, A.M.

    1982-04-13

    A low-cost method of fabricating a solar absorber panel for use with a flat plate solar collector system is disclosed in which a plurality of formed elongated substantially u-shaped members are fixed in a predetermined configuration to the reverse side of a single sheet absorber member forming therewith hollow fluid passages or ducts. The fluid duct members are provided with a series of tabs which alternately protrude through spaced slits in the absorber panel such that when the tabs are folded over, a tight interlocking construction is produced. The ends of the single sheet absorber may then be folded to form inlet and outlet manifolds connecting the ends of the series of spaced ducts including closing end tabs or the manifolds may be fabricated of u-shaped tabbed members in the manner of the connecting passages. After the mechanical assembly, the entire unit is sealed as by pumping liquid solder under pressure through the unit. This not only seals the system but also provides a corrosion-resistant coating of solder over all internal parts.

  5. Compact x-ray source and panel

    DOE Patents [OSTI]

    Sampayon, Stephen E.

    2008-02-12

    A compact, self-contained x-ray source, and a compact x-ray source panel having a plurality of such x-ray sources arranged in a preferably broad-area pixelized array. Each x-ray source includes an electron source for producing an electron beam, an x-ray conversion target, and a multilayer insulator separating the electron source and the x-ray conversion target from each other. The multi-layer insulator preferably has a cylindrical configuration with a plurality of alternating insulator and conductor layers surrounding an acceleration channel leading from the electron source to the x-ray conversion target. A power source is connected to each x-ray source of the array to produce an accelerating gradient between the electron source and x-ray conversion target in any one or more of the x-ray sources independent of other x-ray sources in the array, so as to accelerate an electron beam towards the x-ray conversion target. The multilayer insulator enables relatively short separation distances between the electron source and the x-ray conversion target so that a thin panel is possible for compactness. This is due to the ability of the plurality of alternating insulator and conductor layers of the multilayer insulators to resist surface flashover when sufficiently high acceleration energies necessary for x-ray generation are supplied by the power source to the x-ray sources.

  6. Dual circuit embossed sheet heat transfer panel

    DOE Patents [OSTI]

    Morgan, G.D.

    1984-02-21

    A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed to form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet. 6 figs.

  7. Dual circuit embossed sheet heat transfer panel

    DOE Patents [OSTI]

    Morgan, Grover D.

    1984-01-01

    A heat transfer panel provides redundant cooling for fusion reactors or the like environment requiring low-mass construction. Redundant cooling is provided by two independent cooling circuits, each circuit consisting of a series of channels joined to inlet and outlet headers. The panel comprises a welded joinder of two full-size and two much smaller partial-size sheets. The first full-size sheet is embossed to form first portions of channels for the first and second circuits, as well as a header for the first circuit. The second full-sized sheet is then laid over and welded to the first full-size sheet. The first and second partial-size sheets are then overlaid on separate portions of the second full-sized sheet, and are welded thereto. The first and second partial-sized sheets are embossed to form inlet and outlet headers, which communicate with channels of the second circuit through apertures formed in the second full-sized sheet.

  8. Women of Waste Management Panel Advises Audience: 'Embrace Hard Work' |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Women of Waste Management Panel Advises Audience: 'Embrace Hard Work' Women of Waste Management Panel Advises Audience: 'Embrace Hard Work' March 30, 2015 - 12:00pm Addthis Panelists, from left, included Johnson, Charboneau, and Piketty, and moderator Jody Redeker. Panelists, from left, included Johnson, Charboneau, and Piketty, and moderator Jody Redeker. PHOENIX - A panel of distinguished leaders in nuclear cleanup discussed issues facing women in the workplace in

  9. Jo Sexton, President, Cambridge Area Chamber of Commerce Panel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Outliine for QER July 21, 2014 Jo Sexton, President, Cambridge Area Chamber of Commerce Panel 3 Public-Private Partnerships for Economic Growth and Workforce Development How a ...

  10. Material gain: Research a step toward more efficient solar panels |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MIT-Harvard Center for Excitonics Material gain: Research a step toward more efficient solar panels 10.7.2014

  11. Towards Efficient Execution of Irregular Applications: Panel Outline

    SciTech Connect (OSTI)

    Feo, John T.; Villa, Oreste; Tumeo, Antonino; Secchi, Simone

    2011-12-06

    This panel seeks to discuss the current challenges for the efficient execution of irregular applications and to propose directions for the development of next generation systems.

  12. Utilization of localized panel resonant behavior in wind turbine blades.

    SciTech Connect (OSTI)

    Griffith, Daniel Todd

    2010-11-01

    The shear webs and laminates of core panels of wind turbine blades must be designed to avoid panel buckling while minimizing blade weight. Typically, buckling resistance is evaluated by consideration of the load-deflection behavior of a blade using finite element analysis (FEA) or full-scale static loading of a blade to failure under a simulated extreme loading condition. This paper examines an alternative means for evaluating blade buckling resistance using non-destructive modal tests or FEA. In addition, panel resonances can be utilized for structural health monitoring by observing changes in the modal parameters of these panel resonances, which are only active in a portion of the blade that is susceptible to failure. Additionally, panel resonances are considered for updating of panel laminate model parameters by correlation with test data. During blade modal tests conducted at Sandia Labs, a series of panel modes with increasing complexity was observed. This paper reports on the findings of these tests, describes potential ways to utilize panel resonances for blade evaluation, health monitoring, and design, and reports recent numerical results to evaluate panel resonances for use in blade structural health assessment.

  13. Permits and Variances for Solar Panels, Calculation of Impervious...

    Broader source: Energy.gov (indexed) [DOE]

    construction, or stormwater may only include the foundation or base supporting the solar panel. The law generally applies statewide, including charter counties and Baltimore...

  14. Obama Administration Announces Plans to Install New Solar Panels...

    Broader source: Energy.gov (indexed) [DOE]

    on Environmental Quality. "By installing solar panels on arguably the most famous house in ... will help make solar energy cost-competitive with conventional ...

  15. DOE Benefits Forecasts: Report of the External Peer Review Panel

    Office of Energy Efficiency and Renewable Energy (EERE)

    A report for the FY 2007 GPRA methodology review, highlighting the views of an external expert peer review panel on DOE benefits forecasts.

  16. DOE Hydrogen and Fuel Cell Activities Panel Discussion: 2010...

    Broader source: Energy.gov (indexed) [DOE]

    Presentation by Sunita Satyapal at the 2010 Society of Automotive Engineers (SAE) World Congress in Detroit, Michigan. DOE Hydrogen and Fuel Cell Activities Panel Discussion ...

  17. CDM Accreditation Panel CDM AP | Open Energy Information

    Open Energy Info (EERE)

    Bonn, Germany Zip: 53153 Product: The CDM accreditation panel (CDM-AP) prepares the decision making of the Executive Board in accordance with the procedure for accrediting...

  18. Ground Magnetics At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (U.S. Geological Survey, 2012) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Ground Magnetics At Blue Mountain...

  19. Future challenges of NEPA: A panel discussion

    SciTech Connect (OSTI)

    Smith, E.D.

    1989-01-01

    One portion of a plenary session during the conference was a forum on The Future Challenges of NEPA.'' The session was a panel discussion. Each of the panelists was to spent 10 to 15 minutes talking about their observations on how NEPA is operating, some of the trends they observed, and how they thought NEPA might change in the future. Topics discussed in this forum included Congressional proposals to amend NEPA; possible changes at the CEQ; post-decision monitoring, mitigation, and follow-up studies; applicability of NEPA to international actions of the US government; assessment of global change impacts; and the relationship between NEPA and state little NEPA'' laws. The individual presentations and the subsequent discussion are described in this paper. 5 refs.

  20. Slim Holes At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    1 was completed in 2002 and it reached a depth of 672.1 m and a temperature of 144.7C. Deep Blue No. 2, was drilled and completed in 2004. It reached 1128 m depth and a...

  1. Geophysical Studies in the Vicinity of Blue Mountain and Pumpernickel...

    Open Energy Info (EERE)

    Studies in the Vicinity of Blue Mountain and Pumpernickel Valley near Winnemucca, North-Central Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Report:...

  2. Blue Ridge, Texas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Ridge is a city in Collin County, Texas. It falls under Texas's 4th congressional...

  3. Blue Earth County, Minnesota: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Earth County is a county in Minnesota. Its FIPS County Code is 013. It is classified as...

  4. Blue Point, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Point is a census-designated place in Suffolk County, New York.1 References US...

  5. Blue Ash, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Ash is a city in Hamilton County, Ohio. It falls under Ohio's 2nd congressional...

  6. Blue Lake, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Lake is a city in Humboldt County, California. It falls under California's 1st...

  7. Blue Chip Energy GmbH | Open Energy Information

    Open Energy Info (EERE)

    Chip Energy GmbH Jump to: navigation, search Name: Blue Chip Energy GmbH Place: Guessing, Austria Zip: A-7540 Product: Monocrystalline silicon PV cell manufacturer. References:...

  8. Blue Ridge Electric Coop Inc | Open Energy Information

    Open Energy Info (EERE)

    Blue Ridge Electric Coop Inc Place: South Carolina Phone Number: 864-878-6326; 864-647-2005; 1-800-240-3400 Website: www.blueridge.coop Twitter: @blueridgecoop Facebook: https:...

  9. Blue Hills, Connecticut: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Hills is a census-designated place in Hartford County, Connecticut.1 References ...

  10. Blue Diamond, Nevada: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Diamond is a census-designated place in Clark County, Nevada.1 References US...

  11. Blue Island, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Island is a city in Cook County, Illinois. It falls under Illinois' 1st congressional...

  12. Blue Earth-Nicollet-Faribault | Open Energy Information

    Open Energy Info (EERE)

    Earth-Nicollet-Faribault Jump to: navigation, search Name: Blue Earth-Nicollet-Faribault Place: Minnesota Phone Number: 507-387-7963 Website: www.benco.org Facebook: https:...

  13. City of Blue Mound, Kansas (Utility Company) | Open Energy Information

    Open Energy Info (EERE)

    Mound, Kansas (Utility Company) Jump to: navigation, search Name: City of Blue Mound Place: Kansas Phone Number: (913) 756-2447 Outage Hotline: (913) 756-2447 References: EIA Form...

  14. City of Blue Earth, Minnesota (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    Earth, Minnesota (Utility Company) Jump to: navigation, search Name: City of Blue Earth Place: Minnesota Phone Number: (507) 526-2191 or (507) 526-5382 or (507) 526-2402 Website:...

  15. Blue Mounds, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Blue Mounds is a village in Dane County, Wisconsin. It falls under Wisconsin's 2nd...

  16. Blue Ridge Electric Cooperative- Heat Pump Loan Program

    Broader source: Energy.gov [DOE]

    Blue Ridge Electric Cooperative (BREC) offers low interest loans to help members finance the purchase of energy efficient heat pumps. Loans under $1,500 can be financed for up to 42 months, and...

  17. Blue Ridge Mountain E M C | Open Energy Information

    Open Energy Info (EERE)

    C Jump to: navigation, search Name: Blue Ridge Mountain E M C Abbreviation: brmemc Place: Georgia Phone Number: 706.379.3121; 828.837.1017 Website: www.brmemc.com Outage Hotline:...

  18. Blue Peter Project Group Inc | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Name: Blue Peter Project Group Inc Place: Oakville, Ontario, Canada Zip: L6M 2B8 Sector: Solar Product: Alternative energy project developer in Canada,...

  19. Blue Ridge Electric Cooperative- Residential Water Heater Rebate

    Broader source: Energy.gov [DOE]

    Blue Ridge Electric Cooperative offers up to $300 for the purchase of an electric water heater. The rebate amount varies based on the size of the water heater purchased.

  20. Blue Ridge Mountain Electric Membership Corporation- Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Blue Ridge Mountain EMC and TVA, its power supplier, offer the Energy Right and TVA E-Score rebates to qualified members. To qualify for water heater rebates provided by the Energy Right program, a...

  1. ELECTROLUMINESCENT MATERIAL FOR FLAT PANEL DISPLAY

    SciTech Connect (OSTI)

    Smith, D.B.

    2000-11-13

    The purpose of this Cooperative Research and Development Agreement (CRADA) was to develop a new-generation electroluminescent (EL) material for flat panel displays and related applications by using unique and complementary research capabilities at Oak Ridge National Laboratory and OSRAM Sylvania, Inc. The goal was to produce an EL material with a luminance 10 times greater than conventional EL phosphors. An EL material with this increased luminance would have immediate applications for flat panel display devices (e.g., backlighting for liquid-crystal diodes) and for EL lamp technology. OSRAM Sylvania proposed that increased EL phosphor luminance could be obtained by creating composite EL materials capable of alignment under an applied electric field and capable of concentrating the applied electric field. Oak Ridge National Laboratory used pulsed laser deposition as a method for making these composite EL materials. The materials were evaluated for electroluminescence at laboratory facilities at OSRAM Sylvania, Inc. Many composite structures were thus made and evaluated, and it was observed that a composite structure based on alternating layers of a ferroelectric and a phosphor yielded electroluminescence. An enabling step that was not initially proposed but was conceived during the cooperative effort was found to be crucial to the success of the composite structure. The CRADA period expired before we were able to make quantitative measurements of the luminance and efficiency of the composite EL material. Future cooperative work, outside the scope of the CRADA, will focus on making these measurements and will result in the production of a prototype composite EL device.

  2. Record External Quantum Efficiency in Blue OLED Device

    Broader source: Energy.gov [DOE]

    Scientists at Pacific Northwest National Laboratory (PNNL) have created a blue organic light emitting diode (OLED) with an external quantum efficiency (EQE) of 11% at 800 cd/m2, exceeding their previous record EQE of 8%. The EQE of blue OLEDs is a major challenge in OLED technology development. This achievement is particularly notable since it was accomplished at a much lower operating voltage (6.2V) than previous demonstrations using similar structures, revealing the potential for much higher power efficiencies.

  3. LPO5-002-Proj-Poster-GEO-BlueMtn

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BLUE MOUNTAIN The state-of-the-art Blue Mountain plant is helping Nevada use its geothermal resources to meet its clean energy goals. INVESTING in AMERICAN ENERGY OWNER AltaRock Energy, Inc. LOCATION Humbolt County, Nevada LOAN AMOUNT $98.5 Million ISSUANCE DATE November 2010 GENERATION CAPACITY 39 MW PROJECTED ANNUAL GENERATION 240,000 MWh CLIMATE BENEFIT 130,000 Metric Tons of C0 2 Prevented Annually

  4. Bradbury Science Museum participates in Blue Star Museums program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Museum participates in Blue Star Museums program Bradbury Science Museum participates in Blue Star Museums program Museum to host active duty military personnel and their families from Memorial Day, May 25, through Labor Day, Sept. 7. May 21, 2015 Bradbury Science Museum, los Alamos, New Mexico Bradbury Science Museum, Los Alamos, New Mexico Contact Los Alamos National Laboratory Steve Sandoval Communications Office (505) 665 9206 Email "The museum already has a free-admission policy, but

  5. Ultrathin Optical Panel And A Method Of Making An Ultrathin Optical Panel.

    SciTech Connect (OSTI)

    Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard; Veligdan, James T.

    2005-02-15

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  6. Ultrathin optical panel and a method of making an ultrathin optical panel

    SciTech Connect (OSTI)

    Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard; Veligdan, James T.

    2001-10-09

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  7. Ultrathin optical panel and a method of making an ultrathin optical panel

    SciTech Connect (OSTI)

    Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard; Veligdan, James T.

    2003-02-11

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  8. Ultrathin Optical Panel And A Method Of Making An Ultrathin Optical Panel.

    SciTech Connect (OSTI)

    Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard; Veligdan, James T.

    2005-05-17

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated with a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  9. Ultrathin optical panel and a method of making an ultrathin optical panel

    SciTech Connect (OSTI)

    Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard; Veligdan, James T.

    2002-01-01

    An ultrathin optical panel, and a method of producing an ultrathin optical panel, are disclosed, including stacking a plurality of glass sheets, which sheets may be coated With a transparent cladding substance or may be uncoated, fastening together the plurality of stacked coated glass sheets using an epoxy or ultraviolet adhesive, applying uniform pressure to the stack, curing the stack, sawing the stack to form an inlet face on a side of the stack and an outlet face on an opposed side of the stack, bonding a coupler to the inlet face of the stack, and fastening the stack, having the coupler bonded thereto, within a rectangular housing having an open front which is aligned with the outlet face, the rectangular housing having therein a light generator which is optically aligned with the coupler. The light generator is preferably placed parallel to and proximate with the inlet face, thereby allowing for a reduction in the depth of the housing.

  10. Microsoft Word - Panel 5 Disposal Operations Complete.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fo E Comp anel 5 M., August 1 s in Panel 5 e. Last mo ed in the pa manageme shment," N ... U waste per d of in the W n Panel 5 no elds stacke - More - diate Rele Disposa WIPP U he ...

  11. Microsoft PowerPoint - 15.1615_Cost Estimating Panel | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    615Cost Estimating Panel Microsoft PowerPoint - 15.1615Cost Estimating Panel PDF icon Microsoft PowerPoint - 15.1615Cost Estimating Panel More Documents & Publications ...

  12. Method of making a photovoltaic panel

    SciTech Connect (OSTI)

    Izu, M.; Cannella, V.D.; Ovshinsky, S.R.

    1987-07-07

    A method is described of making a thin film silicon alloy photovoltaic panel comprising the steps of: providing a substantially continuous web of flexible substrate material. The substrate material comprises a support layer having at least one substantially planar deposition surface with a layer of electrically insulating material; providing one or more electrode-forming regions upon the layer of insulating material; providing at least three discrete deposition chambers, each chamber including glow discharge means for the deposition of a discrete layer of thin film silicon alloy material; the conductivity type of the layer of silicon alloy material deposited in each chamber differing from one another; substantially continuously feeding the web of substrate material through each of the deposition chamber; introducing reaction gases into each of the deposition chambers; providing means between adjacent deposition chambers for isolating the reaction gases in each chamber from one another; activating the glow discharge deposition means for disassociating the reaction gases and depositing a successive layer of silicon alloy material in each of the deposition chambers, the layers of silicon alloy material forming a photovoltaic region; and forming a thin, flexible electrode layer on the last deposited layer of silicon alloy material.

  13. Alaska panel urges oil tanker changes

    SciTech Connect (OSTI)

    Dillingham, S.

    1990-02-05

    A commission assigned by the state of Alaska to investigate the Exxon Valdez oil spill says the Coast Guard's regulation of oil transportation had grown slack over the decade preceding the 11 million-gallon spill. The vigilance over tanker traffic that was established in the early days of pipeline flow had given way to complacency and neglect, says the commission's report, which calls for a revamping of the U.S. oil transportation system. The review places the blame for the spill not only on the Coast Guard but on the oil industry's thirst for profits in the 1980s and blames the state itself for not living up to its obligation to manage and protect its own waters. The report offers 59 recommendations that cover tanker construction and crew training, spill prevention, strategies for responding to spills and cleanup technologies. The panel also wants to see more stringent tanker safety standards, strengthened enforcement of the new regulations and greater penalties levied against violators. The Coast Guard expects that it will be some time before revisions in its tanker monitoring operations are in place.

  14. Panel 1 - comparative evaluation of deposition technologies

    SciTech Connect (OSTI)

    Fenske, G.R.; Stodolsky, F.; Benson, D.K.; Pitts, R.J.; Bhat, D.G.; Yulin Chen; Gat, R.; Sunkara, M.K.; Kelly, M.; Lawler, J.E.; Nagle, D.C.; Outka, D.; Revankar, G.S.; Subramaniam, V.V.; Wilbur, P.J.; Mingshow Wong; Woolam, W.E.

    1993-01-01

    This working group attempted to evaluate/compare the different types of deposition techniques currently under investigation for depositing diamond and diamond-like carbon films. A table lists the broad types of techniques that were considered for depositing diamond and diamond-like carbon films. After some discussion, it was agreed that any evaluation of the various techniques would be dependent on the end application. Thus the next action was to list the different areas where diamond and DLC films could find applications in transportation. These application areas are listed in a table. The table intentionally does not go into great detail on applications because that subject is dealt with specifically by Panel No. 4 - Applications To Transportation. The next action concentrated on identifying critical issues or limitations that need to be considered in evaluating the different processes. An attempt was then made to rank different broad categories of deposition techniques currently available or under development based on the four application areas and the limitations. These rankings/evaluations are given for diamond and DLC techniques. Finally, the working group tried to identify critical development and research issues that need to be incorporated into developing a long-term program that focuses on diamond/DLC coatings for transportation needs. 5 tabs.

  15. Fatigue response of repaired thick aluminum panels with bondline flaws

    SciTech Connect (OSTI)

    Conley, D.S.

    1999-03-01

    This research investigated the fatigue response of precracked 558 x 177.8 x 6.35 mm (22.0 x 7.0 x 0.25 in) 2024-T351 aluminum panels repaired with single-sided partially bonded, unidirectional, eighteen ply boron/epoxy reinforcements. Disbonds were introduced into the bondline of each repair during the adhesion process using teflon inserts. Five different disbond configurations, with varying disbond locations and sizes, were tested. Each repaired panel was subjected to constant amplitude cyclic fatigue loading with a maximum stress of 120MPa. Results from the different configurations were compared against one another and against repaired panels with no debonds to assess the effect of disbonds on repair life. Results from the experimentation showed that even in the case of very large disbonds (20% of total bond area), the bonded repairs significantly extended the lives of the cracked panels. Disbond configurations with disbonds located away from the crack in the aluminum panel, performed comparably to the repaired panel with no disbonds. Disbond configurations with disbonds covering the crack in the aluminum panel yielded slightly lower lives than those obtained from repaired panels with no disbonds. Cyclic fatigue loading caused no increase in size of the artificially induced disbonds. Cyclic disbond growth was observed in the immediate vicinity of the crack. Finite element analysis using the Three Layer Technique was performed to assess the ability of current modeling techniques in predicting the life of cracked thick aluminum panels repaired with composite patches. Results from the finite element analysis were shown to very closely match experimental data.

  16. CENSUS OF BLUE STARS IN SDSS DR8

    SciTech Connect (OSTI)

    Scibelli, Samantha; Newberg, Heidi Jo; Carlin, Jeffrey L.; Yanny, Brian

    2015-01-01

    We present a census of the 12,060 spectra of blue objects ((g – r){sub 0} < –0.25) in the Sloan Digital Sky Survey (SDSS) Data Release 8 (DR8). As part of the data release, all of the spectra were cross-correlated with 48 template spectra of stars, galaxies, and QSOs to determine the best match. We compared the blue spectra by eye to the templates assigned in SDSS DR8. 10,856 of the objects matched their assigned template, 170 could not be classified due to low signal-to-noise ratio, and 1034 were given new classifications. We identify 7458 DA white dwarfs, 1145 DB white dwarfs, 273 rarer white dwarfs (including carbon, DZ, DQ, and magnetic), 294 subdwarf O stars, 648 subdwarf B stars, 679 blue horizontal branch stars, 1026 blue stragglers, 13 cataclysmic variables, 129 white dwarf-M dwarf binaries, 36 objects with spectra similar to DO white dwarfs, 179, quasi-stellar objects (QSOs), and 10 galaxies. We provide two tables of these objects, sample spectra that match the templates, figures showing all of the spectra that were grouped by eye, and diagnostic plots that show the positions, colors, apparent magnitudes, proper motions, etc., for each classification. Future surveys will be able to use templates similar to stars in each of the classes we identify to automatically classify blue stars, including rare types.

  17. High Energy Physics Advisory Panel October 1-2, 2015 | U.S. DOE...

    Office of Science (SC) Website

    High Energy Physics Advisory Panel October 1-2, 2015 High Energy Physics Advisory Panel (HEPAP) HEPAP Home Meetings Previous Meetings 2015 HEPAP Membership ChargesReports Charter...

  18. POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel (PSP) Briefing Process POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel (PSP) Briefing Process ...

  19. PANEL OP CONSULTrnS MEETING ON RULISON

    Office of Legacy Management (LM)

    PANEL OP CONSULTrnS MEETING ON RULISON . - . . .. W V E Y GAP DAM) .. . . .. . N E V m OPERATIONS OFFICE Reported By: ( 2 - I / RTiXN0T.S ELECTRICAL U. ENGINEERING CO., INC., J 4 - .I, / I i Q b OFFICE OF COORDINATOR-BOARDS & PANELS This page intentionally left blank S.GETY PANEL 0 7 CC'_<SJLT/JTS E Z T I S G GN RULISGX (EJ?-YVEY G.2 DAY) KZVA9A STERATI OSS OFFICE May 1. 1969 . . . . . . . . . . . . . Opening Remarks Spring and Well Inventory . . . . . . . . Arez Z;.=ventory . . . . . . .

  20. Automatic ranging circuit for a digital panel meter

    DOE Patents [OSTI]

    Mueller, Theodore R.; Ross, Harley H.

    1976-01-01

    This invention relates to a range changing circuit that operates in conjunction with a digital panel meter of fixed sensitivity. The circuit decodes the output of the panel meter and uses that information to change the gain of an input amplifier to the panel meter in order to insure that the maximum number of significant figures is always displayed in the meter. The circuit monitors five conditions in the meter and responds to any of four combinations of these conditions by means of logic elements to carry out the function of the circuit.

  1. Physics of the Blues: Music, Fourier and Wave - Particle Duality

    SciTech Connect (OSTI)

    Gibson, J. Murray

    2003-10-15

    Art and science are intimately connected. There is probably no art that reveals this more than music. Music can be used as a tool to teach physics and engineering to non-scientists, illustrating such diverse concepts as Fourier analysis and quantum mechanics. This colloquium is aimed in reverse, to explain some interesting aspects of music to physicists. Topics include: What determines the frequency of notes on a musical scale? What is harmony and why would Fourier care? Where did the blues come from? (We' re talking the 'physics of the blues', and not 'the blues of physics' - that's another colloquium). Is there a musical particle? The presentation will be accompanied by live keyboard demonstrations. The presenter will attempt to draw tenuous connections between the subject of his talk and his day job as Director of the Advanced Photon Source at Argonne National Laboratory.

  2. Printed decorative solar panels could become part of our homes...

    Open Energy Info (EERE)

    content Printed decorative solar panels could become part of our homes and offices Hello, I provide user supp... The top one on this page: htt... Can you send the specific...

  3. Kingspan Insulated Panels: Proposed Penalty (2013-CE-5353)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE alleged in a Notice of Proposed Civil Penalty that Kingspan Insulated Panels, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  4. Diversified Panels Systems: Proposed Penalty (2013-CE-5346)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE alleged in a Notice of Proposed Civil Penalty that Diversified Panels Systems, Inc. failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  5. New generation of panel programs for radiation-diffraction problems

    SciTech Connect (OSTI)

    Breit, S.R.; Sclavounos, P.D.; Newman, J.N.

    1985-01-01

    Two computer programs were developed to analyze wave interactions with three-dimensional bodies. The first program, for spheroidal bodies, uses special panels to represent the exact body shape. The second program, based on flat quadrilateral panels, is applicable to arbitrary bodies. Green's theorem is employed with sources and normal dipoles on the body surface, and the subroutine FINGREEN is used to evaluate these singularities. Extensive comparisons are made for the heave added-mass and damping coefficients of a spheroid and an axisymmetric cylinder. Collocation and Galerkin techniques are compared, and Richardson extrapolation is shown to be an effective method for improving the accuracy without increasing the number of panels. Error tables are presented for these different approaches to show the effect on the final accuracy of varying the number of panels. Special studies are made in the vicinity of the first irregular frequency.

  6. Study of Alternative Approaches for Transite Panel Removal

    Office of Environmental Management (EM)

    remove the panel and lower it to the ground (Fig. 1). The mechanical method uses excavator equipment to pull the transite from the building and lower it to the ground (Fig. 2). ...

  7. Microsoft Word - Minutes from Sept 2008 seismic LL panel 10...

    Office of Environmental Management (EM)

    MINUTES FROM SEISMIC LESSONS-LEARNED PANEL SEPTEMBER 23-24, 2008 Background The Chief of ... His method begins with a uniform hazard spectrum as the target and then develops a ...

  8. Building-Integrated Solar Panels at BigHorn

    Broader source: Energy.gov [DOE]

    This photograph features the building-integrated photovoltaic (PV) panels at BigHorn Home Improvement Center, installed on the south-facing roof. The silicon PV modules were wired into three arrays...

  9. City and County of Denver- Solar Panel Permitting

    Broader source: Energy.gov [DOE]

    Denver provides same-day permit review for most solar panel projects. Electrical, Plumbing, and Zoning Permits* are required for photovoltaic (PV) systems installed in the city of Denver, althoug...

  10. Panel Celebrates EM Achievements, Prepares for More Milestones

    Broader source: Energy.gov [DOE]

    EM Richland Operations Office Manager Stacy Charboneau kicked off the first panel at the National Cleanup Workshop, emphasizing the importance of a united team of federal and contractor employees, regulators, Tribes, communities, and other stakeholders in continued cleanup progress.

  11. TWRS vadose zone contamination issue expert panel report

    SciTech Connect (OSTI)

    Shafer, D.S.

    1997-05-01

    When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of the non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self

  12. Picture of the Week: Modeling a small, blue planet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Modeling a small, blue planet This visualization, courtesy of the Lab's MPAS-Ocean Model, shows ocean currents and eddies in a high-resolution global ocean simulation with the Antarctic in the center. May 10, 2015 Modeling a small, blue planet x View extra-large image on Flickr » The oceans play an important role in the earth's climate; they transport heat from equator to pole, provide moisture for rain, and absorb carbon dioxide from the atmosphere. Ocean models, such as this one from Los

  13. May 2010 Seismic Lessons-Learned panel Meeting

    Broader source: Energy.gov [DOE]

    The Chief of Nuclear Safety (CNS) hosted the sixth meeting of the seismic lessons-learned panel at the DOE Forrestal Building on May 11, 2010. This panel was commissioned by CNS in August 2007, and it meets approximately twice per year. These workshops are intended for experts involved in seismic hazard assessments and resulting facility designs across the DOE complex to share experience from their work.

  14. "Increasing Solar Panel Efficiency And Reliability By Evaporative

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cooling" Inventors..--.. Lewis Meixler, Charles Gentile, Patricia Hillyer, Dylan Carpe, Jason Wang, Caroline Brooks | Princeton Plasma Physics Lab Increasing Solar Panel Efficiency And Reliability By Evaporative Cooling" Inventors..--.. Lewis Meixler, Charles Gentile, Patricia Hillyer, Dylan Carpe, Jason Wang, Caroline Brooks The efficiency and reliability of photovoltaic solar panels decreases with increasing operating temperatures. In hot, dry climates, evaporative cooling with a

  15. Low Capital Photovoltaic Panel Electrical Output-Booster System |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Low Capital Photovoltaic Panel Electrical Output-Booster System Low Capital Photovoltaic Panel Electrical Output-Booster System This presentation summarizes the information given during the DOE SunShot Grand Challenge: Summit and Technology Forum, June 13-14, 2012. ssgrandchallenge_finance_schrag.pdf (63.07 KB) More Documents & Publications The SunShot Vision Study SunShot Vision Study: February 2012 (Book), SunShot, Energy Efficiency & Renewable Energy (EERE)

  16. Seasonal control skylight glazing panel with passive solar energy switching

    SciTech Connect (OSTI)

    Miller, J.V.

    1983-10-25

    A substantially transparent one-piece glazing panel is provided for generally horizontal mounting in a skylight. The panel is comprised of an repeated pattern of two alternating and contiguous linear optical elements; a first optical element being an upstanding generally right-triangular linear prism, and the second optical element being an upward-facing plano-cylindrical lens in which the planar surface is reflectively opaque and is generally in the same plane as the base of the triangular prism.

  17. October 2009 Seismic Lessons-Learned panel Meeting

    Broader source: Energy.gov [DOE]

    The Chief of Nuclear Safety (CNS) and the Office of Environmental Management (EM) hosted the fifth meeting of the seismic lessons-learned panel at the DOE Forrestal Building on October 6, 2009. This panel was originally commissioned by the CNS in August 2007, and it meets approximately twice per year. These workshops are intended for experts involved in seismic hazard assessments and resulting facility designs across the DOE complex to share experience from their work and improve project performance.

  18. Mir 1 cooperative solar array photovoltaic panel production

    SciTech Connect (OSTI)

    Wilkinson, W.

    1995-12-31

    This paper describes the production and on-schedule delivery to Russia of 80-watt solar array panels by Lockheed Missiles and Space Co., Inc. Ninety flight-ready panels were delivered to RSC-Energia in Kaliningrad near Moscow in November and December 1994. After assembly by the Russians they are scheduled to be delivered in October 1995 by the US Space Shuttle Atlantis (STS-74) to the Russian Mir 1 module of International Space Station Alpha.

  19. Differing professional views or opinions: 1994 Special Review Panel

    SciTech Connect (OSTI)

    1996-09-01

    In July 1994, the Executive Director for Operations of the US Nuclear Regulatory Commission (NRC) appointed a Special Review Panel to assess the Differing Professional View or Opinion (DPV/DPO) process, including its effectiveness, how well it is understood by employees, and the organizational climate for having such views aired and properly decided. An additional area within this review was to address the effectiveness of the DPO procedures as they pertain to public access and confidentiality. Further, the Panel was charged with the review of the submittals completed since the last review to identify employees who made significant contributions to the agency or to the public health and safety but had not been adequately recognized for this contribution. The report presents the Special Review Panel`s evaluation of the NRC`s current process for dealing with Differing Professional Views or Opinions. Provided in this report are the results of an employee opinion survey on the process; highlights and suggestions from interviews with individuals who had submitted a Differing Professional View or Opinion, as well as with agency managers directly involved with the Differing Professional Views or Opinions process; and the Special Review Panel`s recommendations for improving the DPV/DPO process.

  20. Development and evaluation of sealing technologies for photovoltaic panels

    SciTech Connect (OSTI)

    Glass, S.J.; Hosking, F.M.; Baca, P.M.

    1998-07-01

    This report summarizes the results of a study to develop and evaluate low temperature glass sealing technologies for photovoltaic applications. This work was done as part of Cooperative Research and Development Agreement (CRADA) No. SC95/01408. The sealing technologies evaluated included low melting temperature glass frits and solders. Because the glass frit joining required a material with a melting temperature that exceeded the allowable temperature for the active elements on the photovoltaic panels a localized heating scheme was required for sealing the perimeter of the glass panels. Thermal and stress modeling were conducted to identify the feasibility of this approach and to test strategies designed to minimize heating of the glass panel away from its perimeter. Hardware to locally heat the glass panels during glass frit joining was designed, fabricated, and successfully tested. The same hardware could be used to seal the glass panels using the low temperature solders. Solder adhesion to the glass required metal coating of the glass. The adhesion strength of the solder was dependent on the surface finish of the glass. Strategies for improving the polyisobutylene (PIB) adhesive currently being used to seal the panels and the use of Parylene coatings as a protective sealant deposited on the photovoltaic elements were also investigated. Starting points for further work are included.

  1. Spinning like a blue straggler: the population of fast rotating blue straggler stars in ? Centauri

    SciTech Connect (OSTI)

    Mucciarelli, A.; Lovisi, L.; Ferraro, F. R.; Dalessandro, E.; Lanzoni, B.

    2014-12-10

    By using high-resolution spectra acquired with FLAMES-GIRAFFE at the ESO/VLT, we measured the radial and rotational velocities for 110 blue straggler stars (BSSs) in ? Centauri, the globular cluster-like stellar system harboring the largest known BSS population. According to their radial velocities, 109 BSSs are members of the system. The rotational velocity distribution is very broad, with the bulk of BSSs spinning at less than ?40 km s{sup 1} (in agreement with the majority of such stars observed in other globular clusters) and a long tail reaching ?200 km s{sup 1}. About 40% of the sample has v{sub e} sin i > 40 km s{sup 1} and about 20% has v{sub e} sin i > 70 km s{sup 1}. Such a large fraction is very similar to the percentage of fast rotating BSSs observed in M4. Thus, ? Centauri is the second stellar cluster, beyond M4, with a surprisingly high population of fast spinning BSSs. We found a hint of radial behavior for a fraction of fast rotating BSSs, with a mild peak within one core radius, and a possible rise in the external regions (beyond four core radii). This may suggest that recent formation episodes of mass transfer BSSs occurred preferentially in the outskirts of ? Centauri, or that braking mechanisms able to slow down these stars are least efficient in the lowest density environments.

  2. Ribbon cutting makes history

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    being built at the nation's capital were enlightening. I am sure Lawler Wood and Turner Construction personnel in the room must have swelled with pride to hear such grand...

  3. RESL Ribbon Cutting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INL Research Center in Idaho Falls, replaces an aging facility at the INL Site. Click on image to enlarge Click on image to enlarge Editorial Date August 25, 2010 By Brad Bugger...

  4. Bonded Bracket Assmebly for Frameless Solar Panels

    SciTech Connect (OSTI)

    Murray, Todd; Jackson, Nick; Dupont, Luc; Moser, Jeff

    2013-01-30

    that would be bonded to frameless PV modules for commercial rooftop installations; 2) The development of a composite pultruded rail to replace traditional racking materials; 3) In partnership with a roofing company, pilot the certification of a commercial roof to be solar panel compliant, eliminating the need for structural analysis and government oversight resulting in significantly decreased permitting costs; and 4) Reduce the sum of all cost impacts in topic #2 from a baseline total of $2.05/watt to $.34/watt.

  5. Tracking the Performance Evolution of Blue Gene Systems

    SciTech Connect (OSTI)

    Kerbyson, Darren J.; Barker, Kevin J.; Gallo, Diego S.; Chen, Dong; Brunheroto, Jose R.; Ryu, Kyung D.; Chiu, George L.; Hoisie, Adolfy

    2013-06-17

    IBMs Blue Gene supercomputer has evolved through three generations from the original Blue Gene/L to P to Q. A higher level of integration has enabled greater single-core performance, and a larger concurrency per compute node. Although these changes have brought with them a higher overall system peak-performance, no study has examined in detail the evolution of perfor-mance across system generations. In this work we make two significant contri-butions that of providing a comparative performance analysis across Blue Gene generations using a consistent set of tests, and also in providing a validat-ed performance model of the NEK-Bone proxy application. The combination of empirical analysis and the predictive performance model enable us to not only directly compare measured performance but also allow for a comparison of sys-tem configurations that cannot currently be measured. We provide insights into how the changing characteristics of Blue Gene have impacted on the application performance, as well as what future systems may be able to achieve.

  6. Blue-green and green phosphors for lighting applications

    DOE Patents [OSTI]

    Setlur, Anant Achyut; Chandran, Ramachandran Gopi; Henderson, Claire Susan; Nammalwar, Pransanth Kumar; Radkov, Emil

    2012-12-11

    Embodiments of the present techniques provide a related family of phosphors that may be used in lighting systems to generate blue or blue-green light. The phosphors include systems having a general formula of: ((Sr.sub.1-zM.sub.z).sub.1-(x+w)A.sub.wCe.sub.x).sub.3(Al.sub.1-ySi.s- ub.y)O.sub.4+y+3(x-w)F.sub.1-y-3(x-w) (I), wherein 0blue and blue/green light. Further, the phosphors may be used in blends with other phosphors, or in combined lighting systems, to produce white light suitable for illumination.

  7. Data Acquisition Scan for Large Area Flat Panel Digital X-ray Detector Array

    Energy Science and Technology Software Center (OSTI)

    2004-05-01

    Interface large area flat panel digital detector and motion control system for computed tomographic data acquisition.

  8. Panel ensures safe operation of the $94 million NSTX Upgrade | Princeton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy Panel Celebrates EM Achievements, Prepares for More Milestones Panel Celebrates EM Achievements, Prepares for More Milestones October 5, 2015 - 12:20pm Addthis EM Richland Operations Office Manager Stacy Charboneau kicked off the first panel at the National Cleanup Workshop. EM Richland Operations Office Manager Stacy Charboneau kicked off the first panel at the National Cleanup Workshop. EM Richland Operations Office Manager Stacy Charboneau kicked off the first panel at the

  9. Attic Retrofits Using Nail-Base Insulated Panels | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attic Retrofits Using Nail-Base Insulated Panels Attic Retrofits Using Nail-Base Insulated Panels Photo courtesy of the Structural Insulated Panel Association. Photo courtesy of the Structural Insulated Panel Association. Lead Performer: Home Innovation Research Labs-Upper Marlboro, MD Partners: Structural Insulated Panel Association, American Chemistry Council, Forest Products Laboratory, DuPont, APA-The Engineered Wood Association, Insurance Institute for Business and Home Safety, Remodeling

  10. Stepout-Deepening Wells At Blue Mountain Area (Niggemann Et Al...

    Open Energy Info (EERE)

    No. 2 while drilling was 167.5oC at References Kim Niggemann, Brian Fairbank, Susan Petty (2005) Deep Blue No 2- A Resource In The Making At Blue Mountain Additional References...

  11. BlueGene/L Applications: Parallelism on a Massive Scale (Journal...

    Office of Scientific and Technical Information (OSTI)

    BlueGeneL Applications: Parallelism on a Massive Scale Citation Details In-Document Search Title: BlueGeneL Applications: Parallelism on a Massive Scale You are accessing a ...

  12. Step-Out Drilling Results at Blue Mountain, Nevada | Open Energy...

    Open Energy Info (EERE)

    targets based on a detailed structural model at Blue Mt. Nevada have led to high permeability entries in a well offset 1.2 km west of the developing field at Blue...

  13. Coiled-coil dimerization of the LOV2 domain of the blue-light...

    Office of Scientific and Technical Information (OSTI)

    blue-light photoreceptor phototropin 1 from Arabidopsis thaliana Citation Details In-Document Search Title: Coiled-coil dimerization of the LOV2 domain of the blue-light ...

  14. I Have Seen the Light and It's Green...or Pink, or Blue, or Purple...

    Energy Savers [EERE]

    Have Seen the Light and It's Green...or Pink, or Blue, or Purple. Shucks, it's LED Solid-State Lighting. I Have Seen the Light and It's Green...or Pink, or Blue, or Purple. Shucks, ...

  15. Solar panel driven air purging apparatus for motor vehicles

    SciTech Connect (OSTI)

    Bobier, J.A.; Brown, G.E.

    1992-02-18

    This patent describes improvement in a motor vehicle having an enclosable cabin an internal combustion engine, a battery, an ignition switch having an on position for enabling the internal combustion engine and an off position, an electric motor coupled in driving relationship with an air circulating fan for circulating air through the cabin. The improvement comprises: a solar panel mounted upon the vehicle having a panel output exhibiting variable voltage levels including a peak voltage level and substantially constant current; a power transfer regulator for transferring power form the panel to the motor when enabled, including: energy storage means connectable across the panel output and chargeable by the current to variable charge levels; solid-state switch means connected in energy transfer relationship with the energy storage means and actuable between conducting and non-conducting states when the power transfer regulator is enabled; inductor means connected with the solid-state switch means and connectable with the electric motor for conveying current thereto from the panel and the energy storage means when the solid-state switch means is in the conducting state.

  16. T-651: Blue Coat ProxySG Discloses Potentially Sensitive Information in Core Files

    Office of Energy Efficiency and Renewable Energy (EERE)

    A vulnerability was reported in Blue Coat ProxySG. A local user can obtain potentially sensitive information

  17. T-720: Blue Coat Director HTTP Trace Processing Flaw Permits Cross-Site Scripting Attacks

    Office of Energy Efficiency and Renewable Energy (EERE)

    A vulnerability was reported in Blue Coat Director. A remote user can conduct cross-site scripting attacks.

  18. Radiation Effects Research Foundation Links Past and Future | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Effects Research Foundation Links Past and Future Radiation Effects Research Foundation Links Past and Future August 2009 This document provides historical information about the Radiation Effects Research Foundation and its core research activities. Radiation Effects Research Foundation Links Past and Future (195.71 KB) More Documents & Publications Report of the Blue Ribbon Panel on the Review of the Radiation Effects Research Foundation Commemoration of the 60th Annniversary of

  19. NREL: Geothermal Technologies - News Release Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 August 1, 2011 Geothermal Electricity Technology Evaluation Model Webinar Materials Now Available This webinar provided an overview of the model and its use with an emphasis on how the model calculates the generation costs associated with exploration and confirmation activities, well field development, and reservoir definition. August 1, 2011 Blue Ribbon Panel Recommendations Report Available Earlier this spring, the U.S. Department of Energy's (DOE) Geothermal Technologies Program (GTP)

  20. University of Massachusetts, Lowell Final Report: Windhawk Solutions

    Office of Environmental Management (EM)

    Advisory Committee | Department of Energy University Research Reactor Task Force to the Nuclear Energy Research Advisory Committee University Research Reactor Task Force to the Nuclear Energy Research Advisory Committee In mid-February, 2001 The University Research Reactor (URR) Task Force (TF), a sub-group of the Department of Energy (DOE) Nuclear Energy Research Advisory Committee (NERAC), was asked to: * Analyze information collected by DOE, the NERAC "Blue Ribbon Panel,"

  1. University Research Reactor Task Force to the Nuclear Energy Research

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advisory Committee | Department of Energy University Research Reactor Task Force to the Nuclear Energy Research Advisory Committee University Research Reactor Task Force to the Nuclear Energy Research Advisory Committee In mid-February, 2001 The University Research Reactor (URR) Task Force (TF), a sub-group of the Department of Energy (DOE) Nuclear Energy Research Advisory Committee (NERAC), was asked to: * Analyze information collected by DOE, the NERAC "Blue Ribbon Panel,"

  2. Plastic solar panel structure and method for making the same

    SciTech Connect (OSTI)

    Mcalister, R.E.

    1981-06-02

    A method and apparatus are disclosed for extruding a radiant energy heat exchanging panel structure having a multiplicity of parallel passages extending longitudinally therethrough defined by a multiplicity of longitudinally extending integrally interconnected exterior and interior thin wall sections, in which the temperature of the plastic material moving longitudinally away from the extrusion outlet is reduced by flowing fluid into said passages and on the exterior sides thereof, by contacting the exterior sides with pairs of cooled rollers, by rolling a liquid medium upon the operative exterior side, and by flowing a liquid spray thereon to provide a radiation absorbing coating on the exterior side of the panel structure opposite from the operative side thereof. Certain of the flowing fluids are reactant fluids which chemically react with the hot plastic material or condense thereupon to form molecular coatings thereon enhancing the properties thereof as a panel structure.

  3. Method of making a small inlet optical panel

    SciTech Connect (OSTI)

    Veligdan, James T.; Slobodin, David E.

    2004-02-03

    An optical panel having a small inlet, and a method of making a small inlet optical panel, are disclosed, which optical panel includes a individually coating, stacking, and cutting a first plurality of stacked optical waveguides to form an outlet face body with an outlet face, individually coating, stacking, and cutting a second plurality of stacked optical waveguides to form an inlet face body with an inlet face, and connecting an optical coupling element to the first plurality and second plurality of stacked optical waveguides, wherein the optical coupling element redirects light along a parallel axis of the inlet face to a parallel axis of the outlet face. In the preferred embodiment of the present invention, the inlet face is disposed obliquely with and askew from the outlet face.

  4. Evaluation of proposed panel closure modifications at WIPP

    SciTech Connect (OSTI)

    Allen, Lawrence E.; Silva, Matthew K.; Channell, James K.; Abel, John F.; Morgan, Dudley R.

    2001-12-31

    A key component in the design of the WIPP repository is the installation of concrete structures as panel seals in the intake and exhaust drifts after a panel has been filled with waste containers. As noted in the EPA final rule, the panel seal closure system is intended to block brine flow between the waste panels at the WIPP. On April 17, 2001, the DOE proposed seven modifications to the EPA concerning the design of the panel closure system. EPA approval of these modifications is necessary since the details of the panel design are specified in EPA’s final rule as a condition for WIPP certification. However, the EPA has not determined whether a rulemaking would be required for these proposed design modifications. On September 4, 2001, the DOE withdrew the request, noting that it would be resubmitted on a future date. The Environmental Evaluation Group (EEG) contracted with two engineers, Dr. John Abel and Dr. Rusty Morgan, to evaluate the proposed modifications. The EEG has accepted the conclusions and recommendations from these two experts: 1) replacement of Salado Mass Concrete with a generic salt-based concrete; 2) replacement of the explosion wall with a construction wall; 3) replacement of freshwater grouting with salt-based grouting; 4) option to allow surface or underground mixing; and 5) option to allow up to one year for completion of closure. The proposed modification to allow local carbonate river rock as aggregate is acceptable pending demonstration that no problems will exist in the resulting concrete. The proposed modification to give the contractor discretion in removal of steel forms is not supported. Instead, several recommendations are made to specifically reduce the number of forms left, thereby reducing potential migration pathways.

  5. NM company wants to turn your windows into solar panels

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NM company wants to turn your windows into solar panels NM company wants to turn your windows into solar panels "There's an opportunity to generate electricity and power buildings with their windows" August 1, 2016 The UbiQD Team The UbiQD team celebrates the opening of its new quantum dot manufacturing facility in Los Alamos July 29. Contact Hunter McDaniel UbiQD Email UbiQD LLC, a quantum dot company, says it can turn windows into solar generators. "There's an opportunity to

  6. Methods of attaching erosion-resistant nonmetallic panels

    SciTech Connect (OSTI)

    Girzhel, A.M.

    1984-01-01

    Attachment methods for panels of wear-resistant nonmetallic materials, e.g. cast stone and slag, devitrified slag, and erosion-resistant and heat-resistant concretes to protect hopper, chute, and trough structures at metallurgical and coal industries have been investigated. Attachment methods can be divided into two groups, attachment by adhesives and by mechanical attachment. A new method of mechanical attachment, considered to be much superior to adhesive attachment, provides for reliable fastening without damage to the protected metal structure. Various panel designs may be used depending on the operating conditions.

  7. Project Profile: High Performance Reflector Panels for CSP Assemblies |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Concentrating Solar Power » Project Profile: High Performance Reflector Panels for CSP Assemblies Project Profile: High Performance Reflector Panels for CSP Assemblies PPG logo PPG, under the CSP R&D FOA, is aiming to develop and commercialize large-area second-surface glass mirrors that are superior in value, cost, and performance, to existing mirrors on the market today. Approach Photo of a metal stand with flat square-shaped pieces lined up in three rows. This

  8. November 2012 Seismic Lessons-Learned panel Meeting

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Chief of Nuclear Safety (CNS) hosted the seventh meeting of the Seismic Lessons-Learned Panel (SLLP) at the DOE Forrestal Building on November 14, 2012. This panel was commissioned by CNS in August 2007, and it meets as requested by CNS. These meetings are intended for experts involved in seismic hazard assessments and facility seismic design across the DOE complex to share experience from their work. DOE site office staff responsible for seismic and other natural phenomena hazard (NPH) assessments are encouraged to participate.

  9. Surface Catalysis of Water Oxidation by the Blue Ruthenium Dimer

    SciTech Connect (OSTI)

    Jurss, Jonah W.; Concepcion, Javier C.; Norris, Michael R.; Templeton, Joseph L.; Meyer, Thomas J.

    2010-04-08

    Single-electron activation of multielectron catalysis has been shown to be viable in catalytic water oxidation with stepwise proton-coupled electron transfer, leading to high-energy catalytic precursors. For the blue dimer, cis,cis-[(bpy)2(H2O)RuIIIORuIII(H2O)(bpy)2]4+, the first well-defined molecular catalyst for water oxidation, stepwise 4e-/4H+ oxidation occurs to give the reactive precursor [(O)RuVORuV(O)]4+. This key intermediate is kinetically inaccessible at an unmodified metal oxide surface, where the only available redox pathway is electron transfer. We report here a remarkable surface activation of indium-tin oxide (In2O3:Sn) electrodes toward catalytic water oxidation by the blue dimer at electrodes derivatized by surface phosphonate binding of [Ru(4,4'-((HO)2P(O)CH2)2bpy)2(bpy)]2+. Surface binding dramatically improves the rate of surface oxidation of the blue dimer and induces water oxidation catalysis.

  10. The birth of the blues : how physics underlies music.

    SciTech Connect (OSTI)

    Gibson, J. M.

    2009-07-01

    Art and science have intimate connections, although these are often underappreciated. Western music provides compelling examples. The sensation of harmony and related melodic development are rooted in physical principles that can be understood with simple mathematics. The focus of this review is not the better known acoustics of instruments, but the structure of music itself. The physical basis of the evolution of Western music in the last half millennium is discussed, culminating with the development of the 'blues'. The paper refers to a number of works which expand the connections, and introduces material specific to the development of the 'blues'. Several conclusions are made: (1) that music is axiomatic like mathematics and that to appreciate music fully listeners must learn the axioms; (2) that this learning does not require specific conscious study but relies on a linkage between the creative and quantitative brain and (3) that a key element of the musical 'blues' comes from recreating missing notes on the modern equal temperament scale. The latter is an example of 'art built on artifacts'. Finally, brief reference is made to the value of music as a tool for teaching physics, mathematics and engineering to non-scientists.

  11. Analysis and Simulation of a Blue Energy Cycle

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sharma, Ms. Ketki; Kim, Yong-Ha; Yiacoumi, Sotira; Gabitto, Jorge; Bilheux, Hassina Z.; Santodonato, Louis J.; Mayes, Richard T.; Dai, Sheng; Tsouris, Costas

    2016-01-30

    The mixing process of fresh water and seawater releases a significant amount of energy and is a potential source of renewable energy. The so called ‘blue energy’ or salinity-gradient energy can be harvested by a device consisting of carbon electrodes immersed in an electrolyte solution, based on the principle of capacitive double layer expansion (CDLE). In this study, we have investigated the feasibility of energy production based on the CDLE principle. Experiments and computer simulations were used to study the process. Mesoporous carbon materials, synthesized at the Oak Ridge National Laboratory, were used as electrode materials in the experiments. Neutronmore » imaging of the blue energy cycle was conducted with cylindrical mesoporous carbon electrodes and 0.5 M lithium chloride as the electrolyte solution. For experiments conducted at 0.6 V and 0.9 V applied potential, a voltage increase of 0.061 V and 0.054 V was observed, respectively. From sequences of neutron images obtained for each step of the blue energy cycle, information on the direction and magnitude of lithium ion transport was obtained. A computer code was developed to simulate the process. Experimental data and computer simulations allowed us to predict energy production.« less

  12. Modular container assembled from fiber reinforced thermoplastic sandwich panels

    DOE Patents [OSTI]

    Donnelly, Mathew William; Kasoff, William Andrew; Mcculloch, Patrick Carl; Williams, Frederick Truman

    2007-12-25

    An improved, load bearing, modular design container structure assembled from thermoformed FRTP sandwich panels in which is utilized the unique core-skin edge configuration of the present invention in consideration of improved load bearing performance, improved useful load volume, reduced manufacturing costs, structural weight savings, impact and damage tolerance and repair and replace issues.

  13. Analysis Of Dynamic Dent Resistance Of Auto Body Panel

    SciTech Connect (OSTI)

    Deolgaonkar, S. S.; Nandedkar, V. M.

    2007-04-07

    In automotive industry there is increasing demand for higher quality exterior panels, better functional properties and lower weight. The demand for weight reduction has led to thinner sheets, greater use of high strength steels and a change from steel to aluminum grades. This thickness reduction, which causes decrease in the dent resistance, promoted examination of the dent resistance against static and dynamic concentrated loads. This paper describes an investigation of the suitability of explicit dynamic FE analysis as a mean to determine the dynamic dent properties of the panel. This investigation is carried out on the body panel of utility vehicle and covers two parts, in first experimental analysis is carried out on developed test rig, which is interfaced with the computer. This test rig measures deflection with accuracy of .001mm. The experimental results are then compared with the simulation results, which is the second part. Simulation is carried with non-linear transient dynamic explicit analysis using Ansys -Ls Dyna. The experimental results show great accuracy with simulation results. The effect of change in thickness and geometry of the existing fender is then studied with help of simulation technique. By considering the best possible option overall weight of fender is reduced by 7.07 % by keeping the dent resistance of the panel constant.

  14. September 2008 Seismic Lessons-Learned Panel Meeting

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Chief of Nuclear Safety (CNS) hosted the third meeting of the seismic lessons-learned panel at the DOE Forrestal Building in September 2008. These workshops are intended for experts involved in seismic hazard assessments and resulting facility designs across the DOE complex to share experience from their work. The workshops occur approximately twice per year.

  15. Transformer noise reduction with new sound insulation panel

    SciTech Connect (OSTI)

    Kanoi, M.; Hori, Y.; Maejima, M.; Obata, T.

    1983-09-01

    Recently, demands for the reduction of noise generated by transformers have been increasing. Almost all the noise generated by a transformer is a result of magnetostrictive vibration in the core. The noise radiates into the atmosphere from the tank through the insulation oil. One method of reducing such a noise is to build a free-standing enclosure of concrete and steel plates around the transformer. However, this method has some disadvantages, for example, a large area is needed for equipment installation. The authors have developed a new close-fitting sound insulation panel which is structurally isolated from supporting structures to reduce transformer noise. In addition to this isolation, small vibration transmitted through the supporting structures were further reduced with a highly damped plate. In the development of this new panel, an optimum structure was first investigated in calculations. Next, the effectiveness of the new panel was confirmed in experiments with half and full scale models. The overall noise reduction obtained with this new sound insulation panel was 14 dB(A).

  16. Flat panel display development activities at Sandia National Laboratories

    SciTech Connect (OSTI)

    DiBello, E.G.; Worobey, W.; Burchett, S.; Hareland, W.; Felter, T.; Mays, B.

    1994-12-31

    The flat panel display development activities underway at Sandia National Laboratories are described. Research is being conducted in the areas of glass substrates, phosphors, large area processes, and electron emissions. Projects are focused on improving process yield, developing large area processes, and using modeling techniques to predict design performance.

  17. Solar panel with interconnects and masking structure, and method

    SciTech Connect (OSTI)

    Gaddy, E.M.; Dominguez, R.

    1991-04-30

    This patent describes a solar panel. It includes: solar cells having radiation absorbing surface and opposed back surfaces; conducting means for interconnecting the solar cells; a transparent superstrate upon one surface of which radiation absorbing surfaces are mounted; and means upon a surface of the transparent superstrate for masking the interconnecting means.

  18. Predicting the Occurrence of Cosmetic Defects in Automotive Skin Panels

    SciTech Connect (OSTI)

    Hazra, S.; Williams, D.; Roy, R.; Aylmore, R.; Allen, M.; Hollingdale, D.

    2011-05-04

    The appearance of defects such as 'hollows' and 'shock lines' can affect the perceived quality and attractiveness of automotive skin panels. These defects are the result of the stamping process and appear as small, localized deviations from the intended styling of the panels. Despite their size, they become visually apparent after the application of paint and the perceived quality of a panel may become unacceptable. Considerable time is then dedicated to minimizing their occurrence through tool modifications. This paper will investigate the use of the wavelet transform as a tool to analyze physically measured panels. The transform has two key aspects. The first is its ability to distinguish small scale local defects from large scale styling curvature. The second is its ability to characterize the shape of a defect in terms of its wavelength and a 'correlation value'. The two features of the transform enable it to be used as a tool for locating and predicting the severity of defects. The paper will describe the transform and illustrate its application on test cases.

  19. Electrohydraulic Forming of Near Net Shape Automotive Panels

    SciTech Connect (OSTI)

    2009-01-01

    This factsheet describes a research project whose goal is to develop the electrohydraulic forming (EHF) process as a near net shape automotive panel manufacturing technology that simultaneously reduces the energy embedded in vehicles and the energy consumed while producing automotive structures.

  20. Solar Panels to Help Iowa Students Learn About Renewable Energy

    Office of Energy Efficiency and Renewable Energy (EERE)

    Learning about the sun’s power is just as important as harnessing it. New solar panels to be installed on the rooftops of five Iowa middle schools will give students hands-on experience with the technology and help offset some energy costs.

  1. Arkansas Students Get Their Hands Dirty in Solar Panel Project

    Broader source: Energy.gov [DOE]

    Wallie Shaw remembers where he got the idea to do a hands-on solar panel project for his Jobs for America’s Graduates (JAG) students, a school-to-work transition program focused on helping at-risk youth graduate from high school.

  2. Solar collector panels having coated fibrous filling for fire inhibition

    SciTech Connect (OSTI)

    Reinert, C.P.

    1982-04-13

    Solar collector panels filled with porous fiber mats have the fibers coated with a pigmented intumescent paint which expands to partially fill the spaces between the fibers for retarding convective fluid flow through the fiber mat in the case of a fire in the structure with which the collector is associated.

  3. Coordinating Panel for Advanced Detectors | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reports Resources About CPAD Publications News & Events Upcoming Events Press Releases Feature Stories In the News Videos Downloads About HEP at Work Career Opportunities Staff Directory About HEP at Work Career Opportunities Staff Directory Argonne National Laboratory High Energy Physics Research Facilities Capabilities Initiatives Publications News & Events Initiatives ATLAS Support Center Center for Computational Excellence Coordinating Panel for Advanced Detectors Reports Resources

  4. Behavior of Concrete Panels Reinforced with Synthetic Fibers, Mild Steel, and GFRP Composites Subjected to Blasts

    SciTech Connect (OSTI)

    C. P. Pantelides; T. T. Garfield; W. D. Richins; T. K. Larson; J. E. Blakeley

    2012-03-01

    The paper presents experimental data generated for calibrating finite element models to predict the performance of reinforced concrete panels with a wide range of construction details under blast loading. The specimens were 1.2 m square panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consisted of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bars; FRC panels without additional reinforcement; FRC panels with steel bars; NWC panels with glass fiber reinforced polymer (GFRP) bars; and NWC panels reinforced with steel bars and external GFRP laminates on both faces. Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. FRC panels with steel bars had the best performance for new construction. NWC panels reinforced with steel bars and external GFRP laminates on both faces had the best performance for strengthening or rehabilitation of existing structures. The performance of NWC panels with GFRP bars was strongly influenced by the bar spacing. The behavior of the panels is classified in terms of damage using immediate occupancy, life safety, and near collapse performance levels. Preliminary dynamic simulations are compared to the experimental results.

  5. Novel Human Radiation Exposure Biomarker Panel Applicable for Population Triage

    SciTech Connect (OSTI)

    Bazan, Jose G.; Chang, Polly; Balog, Robert; D'Andrea, Annalisa; Shaler, Thomas; Lin, Hua; Lee, Shirley; Harrison, Travis; Shura, Lei; Schoen, Lucy; Knox, Susan J.; Cooper, David E.

    2014-11-01

    Purpose: To identify a panel of radiation-responsive plasma proteins that could be used in a point-of-care biologic dosimeter to detect clinically significant levels of ionizing radiation exposure. Methods and Materials: Patients undergoing preparation for hematopoietic cell transplantation using radiation therapy (RT) with either total lymphoid irradiation or fractionated total body irradiation were eligible. Plasma was examined from patients with potentially confounding conditions and from normal individuals. Each plasma sample was analyzed for a panel of 17 proteins before RT was begun and at several time points after RT exposure. Paired and unpaired t tests between the dose and control groups were performed. Conditional inference trees were constructed based on panels of proteins to compare the non-RT group with the RT group. Results: A total of 151 patients (62 RT, 41 infection, 48 trauma) were enrolled on the study, and the plasma from an additional 24 healthy control individuals was analyzed. In comparison with to control individuals, tenascin-C was upregulated and clusterin was downregulated in patients receiving RT. Salivary amylase was strongly radiation responsive, with upregulation in total body irradiation patients and slight downregulation in total lymphoid irradiation patients compared with control individuals. A panel consisting of these 3 proteins accurately distinguished between irradiated patients and healthy control individuals within 3 days after exposure: 97% accuracy, 0.5% false negative rate, 2% false positive rate. The accuracy was diminished when patients with trauma, infection, or both were included (accuracy, 74%-84%; false positive rate, 14%-33%, false negative rate: 8%-40%). Conclusions: A panel of 3 proteins accurately distinguishes unirradiated healthy donors from those exposed to RT (0.8-9.6 Gy) within 3 days of exposure. These findings have significant implications in terms of triaging individuals in the case of nuclear or other

  6. Report of the Senior Review Panel on the Review of the Radiation...

    Energy Savers [EERE]

    Senior Review Panel on the Review of the Radiation Effects Research Foundation Report of the Senior Review Panel on the Review of the Radiation Effects Research Foundation June 2008 ...

  7. Compressive and shear buckling analysis of metal matrix composite sandwich panels under different thermal environments

    SciTech Connect (OSTI)

    Ko, W.L.; Jackson, R.H.

    1993-06-01

    Combined inplane compressive and shear buckling analysis was conducted on flat rectangular sandwich panels using the Raleigh-Ritz minimum energy method with a consideration of transverse shear effect of the sandwich core. The sandwich panels were fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that slightly slender (along unidirectional compressive loading axis) rectangular sandwich panels have the most desirable stiffness-to-weight ratios for aerospace structural applications; the degradation of buckling strength of sandwich panels with rising temperature is faster in shear than in compression; and the fiber orientation of the face sheets for optimum combined-load buckling strength of sandwich panels is a strong function of both loading condition and panel aspect ratio. Under the same specific weight and panel aspect ratio, a sandwich panel with metal matrix composite face sheets has much higher buckling strength than one having monolithic face sheets.

  8. Method of and apparatus for enabling output power of solar panel to be maximized

    SciTech Connect (OSTI)

    Baker, R.H.

    1983-03-01

    The D.C. Power supplied by a photovoltaic solar panel to a load is controlled by monitoring the slope of the panel voltage vs. Current characteristic and adjusting the current supplied by the panel to the load so that the slope is approximately unity. The slope is monitored by incrementally changing the panel load and indicating whether the resulting change in current derived from the panel is above or below a reference value, indicative of the panel voltage. In response to the change in the monitored current being above the reference value, the slope of a voltage vs. Current curve is greater than unity and the load is adjusted to decrease the current supplied by the panel to the load. Conversely, in response to the current being less than the reference value, the slope of the voltage vs. Current curve is less than unity and the load is adjusted to increase the current supplied by the panel to the load.

  9. Report on Hydrogen Storage Panel Findings in DOE-BES Sponsored...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Storage Panel Findings in DOE-BES Sponsored Workshop on Basic Research for Hydrogen Production, Storage and Use Report on Hydrogen Storage Panel Findings in DOE-BES...

  10. Microsoft PowerPoint - 16.1045_Peer Reviews Panel_Lehman Workshop...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    045Peer Reviews PanelLehman Workshop Briefing w-headings Microsoft PowerPoint - 16.1045Peer Reviews PanelLehman Workshop Briefing w-headings PDF icon Microsoft PowerPoint - ...

  11. POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel (PSP) Briefing Process POLICY FLASH 2014-25 Revision to the Procurement Strategy Panel (PSP) Briefing Process For ...

  12. High Energy Physics Advisory Panel August 2012 Meeting | U.S. DOE Office of

    Office of Science (SC) Website

    Science (SC) High Energy Physics Advisory Panel August 2012 Meeting High Energy Physics Advisory Panel (HEPAP) HEPAP Home Meetings Previous Meetings 2016 HEPAP Membership Charges/Reports Charter .pdf file (44KB) HEP Committees of Visitors Federal Advisory Committees HEP Home Meetings High Energy Physics Advisory Panel August 2012 Meeting Print Text Size: A A A FeedbackShare Page Agenda High Energy Physics Advisory Panel Hilton Hotel 1750 Rockville Pike Rockville, Maryland August 27-28, 2012

  13. May 2015 Seismic Lessons-Learned Panel Meeting | Department of Energy

    Office of Environmental Management (EM)

    May 2015 Seismic Lessons-Learned Panel Meeting May 2015 Seismic Lessons-Learned Panel Meeting The Chief of Nuclear Safety (CNS) hosted the eighth meeting of the Seismic Lessons-Learned Panel (SLLP) at the Idaho National Laboratory on May 27, 2015. A primary topic of discussion was the Idaho National Laboratory Seismic Risk Assessment project. This panel was commissioned by CNS in August 2007, and it meets as requested by CNS. These meetings are intended for experts involved in seismic hazard

  14. CSC large panel R&D summary for the SSC GEM muon subsystem

    SciTech Connect (OSTI)

    Pratuch, S.M.; Clements, J.W.; Spellman, G.P.

    1994-05-01

    The GEM Detector uses 1,128 Cathode Strip Chamber (CSC) muon detectors requiring a total of approximately 10,000 precision panels in the CSC assemblies. These panels must be fabricated to extreme tolerances in order to meet the physics requirement. A fabrication technique used to produce two large panels, nominally 1 by 3 meters, is described and the resulting panel precision is reported.

  15. BlueGene/L Specific Modifications to DynInst

    Energy Science and Technology Software Center (OSTI)

    2007-07-02

    DynInst is a dynamic instrumentation library that allows for the modification of running code. This runtime code patching ability allows an application to be modified without requiring the code to be recompiled or relinked. These properties make dynamic instrumentation an attractive method for gathering performance data, debugging an application, or steering an application's execution. This release covers modifications that were made to port this software to the BlueGene/L architecture. It also covers some additional filesmore » that were created for this port.« less

  16. Blue-green phosphor for fluorescent lighting applications

    DOE Patents [OSTI]

    Srivastava, Alok; Comanzo, Holly; Manivannan, Venkatesan; Setlur, Anant Achyut

    2005-03-15

    A fluorescent lamp including a phosphor layer including Sr.sub.4 Al.sub.14 O.sub.25 :Eu.sup.2+ (SAE) and at least one of each of a red, green and blue emitting phosphor. The phosphor layer can optionally include an additional, deep red phosphor and a yellow emitting phosphor. The resulting lamp will exhibit a white light having a color rendering index of 90 or higher with a correlated color temperature of from 2500 to 10000 Kelvin. The use of SAE in phosphor blends of lamps results in high CRI light sources with increased stability and acceptable lumen maintenance over, the course of the lamp life.

  17. ULAS J141623.94+134836.3: A BLUE T DWARF COMPANION TO A BLUE L DWARF

    SciTech Connect (OSTI)

    Burgasser, Adam J.; Looper, Dagny; Rayner, John T.

    2010-06-15

    We confirm the substellar nature of ULAS J141623.94+134836.3 (aka SDSS J1416+1348B), a common proper motion companion to the blue L dwarf SDSS J141624.08+134826.7 identified by Burningham et al. and Scholz. Low-resolution 0.8-2.4 {mu}m spectroscopy obtained with the Infrared Telescope Facility/SpeX shows strong H{sub 2}O and CH{sub 4} absorption bands, consistent with a T7.5 spectral type, and we see possible indications of NH{sub 3} absorption in the 1.0-1.3 {mu}m region. More importantly, the spectrum of SDSS J1416+1348B shows a broadened Y-band peak and highly suppressed K-band flux, both indicative of high surface gravity and/or subsolar metallicity. These traits are verified through spectral model fits, from which we derive atmospheric parameters T{sub eff} = 650 {+-} 60 K, log g = 5.2 {+-} 0.4 cgs, [M/H] {<=} -0.3, and K{sub zz} = 10{sup 4} cm{sup 2} s{sup -1}, the temperature being significantly warmer than that estimated by Burningham et al. These fits also indicate a model-dependent spectroscopic distance of 10.6{sup +3.0}{sub -2.8} pc for SDSS J1416+1348B, formally consistent with the 7.9 {+-} 1.7 pc astrometric distance for SDSS J1416+1348A from Scholz. The common peculiarities of these two co-spatial, co-moving sources suggest that their unusual blue colors-and those of other blue L and T dwarfs in general-arise from age/gravity or metallicity effects, rather than cloud properties alone.

  18. Silica powders for powder evacuated thermal insulating panel and method

    SciTech Connect (OSTI)

    Harris, Michael T.; Basaran, Osman A.; Kollie, Thomas G.; Weaver, Fred J.

    1995-01-01

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

  19. Silica powders for powder evacuated thermal insulating panel and method

    SciTech Connect (OSTI)

    Harris, M.T.; Basaran, O.A.; Kollie, T.G.; Weaver, F.J.

    1996-01-02

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm{sup 3} and an external surface area in the range of about 90 to 600 m{sup 2}/g is described. The silica powders are prepared by reacting a tetraalkyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders. 2 figs.

  20. Silica powders for powder evacuated thermal insulating panel and method

    SciTech Connect (OSTI)

    Harris, Michael T.; Basaran, Osman A.; Kollie, Thomas G.; Weaver, Fred J.

    1994-01-01

    A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2 /g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.