Sample records for beam insolation falling

  1. Insolation integrator

    DOE Patents [OSTI]

    Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

    1980-01-01T23:59:59.000Z

    An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

  2. RESEARCH LETTERS Vibrating insoles and balance

    E-Print Network [OSTI]

    Collins, James J.

    , and such changes have been associated with diminished motor performance. Input noise can enhance sensory and motor be substantially reduced through the application of mechanical noise to the feet via vibrating insoles. We usedRESEARCH LETTERS Vibrating insoles and balance control in elderly people Attila A Priplata, James B

  3. Transient multidimensional second law analysis of solar collectors subjected to time-varying insolation with diffuse components

    SciTech Connect (OSTI)

    Onyegegbu, S.O. (Univ. of Nigeria, Nsukka (Nigeria)); Morhenne, J. (Ruhr-Universitaet, Bochum (Germany))

    1993-01-01T23:59:59.000Z

    This paper presents an unsteady two-dimensional analysis of a flat-plate solar collector subjected to time varying insolation with considerable diffuse components as a better characterization of practical solar collectors. The analysis considers the thermal masses of the absorber, tube, glazing, and the working fluid in the system, as well as the different optical and thermodynamic properties of beam and diffuse radiation. Using two sets of insolation data, one for a near clear day and the other for an overcast day, an exergetic optimization of the system was carried out and flow rates which maximize the total energy output (extracted and accumulated) were determined for flow update periods of once very 30 min, 1 h, and the entire daylight period. The instantaneous optimum flow rates were found to follow the insolation pattern. On a daily basis, the optimum exergetic efficiencies and optimum flow rates were almost independent of the choice of the interval of fluid update, but were about 30% and 10%, respectively, higher for the clear day than for the overcast day.

  4. Insolation data manual and direct normal solar radiation data manual

    SciTech Connect (OSTI)

    none,

    1990-07-01T23:59:59.000Z

    The Insolation Data Manual presents monthly averaged data which describes the availability of solar radiation at 248 National Weather Service (NWS) stations, principally in the United States. Monthly and annual average daily insolation and temperature values have been computed from a base of 24--25 years of data, generally from 1952--1975, and listed for each location. Insolation values represent monthly average daily totals of global radiation on a horizontal surface and are depicted using the three units of measurement: kJ/m{sup 2} per day, Btu/ft{sup 2} per day and langleys per day. Average daily maximum, minimum and monthly temperatures are provided for most locations in both Celsius and Fahrenheit. Heating and cooling degree-days were computed relative to a base of 18.3 C (65 F). For each station, global {bar K}{sub T} (cloudiness index) values were calculated on a monthly and annual basis. Global {bar K}{sub T} is an index of cloudiness and indicates fractional transmittance of horizontal radiation, from the top of the atmosphere to the earth's surface. The second section of this volume presents long-term monthly and annual averages of direct normal solar radiation for 235 NWS stations, including a discussion of the basic derivation process. This effort is in response to a generally recognized need for reliable direct normal data and the recent availability of 23 years of hourly averages for 235 stations. The relative inaccessibility of these data on microfiche further justifies reproducing at least the long-term averages in a useful format. In addition to a definition of terms and an overview of the ADIPA model, a discussion of model validation results is presented.

  5. IHT: Tools for Computing Insolation Absorption by Particle Laden Flows

    SciTech Connect (OSTI)

    Grout, R. W.

    2013-10-01T23:59:59.000Z

    This report describes IHT, a toolkit for computing radiative heat exchange between particles. Well suited for insolation absorption computations, it is also has potential applications in combustion (sooting flames), biomass gasification processes and similar processes. The algorithm is based on the 'Photon Monte Carlo' approach and implemented in a library that can be interfaced with a variety of computational fluid dynamics codes to analyze radiative heat transfer in particle-laden flows. The emphasis in this report is on the data structures and organization of IHT for developers seeking to use the IHT toolkit to add Photon Monte Carlo capabilities to their own codes.

  6. Northsouth topographic slope asymmetry on Mars: Evidence for insolation-related erosion at high obliquity

    E-Print Network [OSTI]

    Head III, James William

    asymmetry. Specifically, we suggest that summertime melting of ground ice on pole-facing slopes occurred, asymmetric troughs in the polar cap deposits of Mars have been interpreted to be due to insolation derived from the gridded topo- graphic map are affected by strongly anisotropic errors. The slopes along

  7. High-Temperature Falling-Particle Receiver

    Broader source: Energy.gov (indexed) [DOE]

    temperatures, nitrate salt fluids become chemically unstable. In contrast, direct absorption receivers using solid particles that fall through a beam of concentrated solar...

  8. Effects of regional insolation differences upon advanced solar thermal electric power plant performance and energy costs

    SciTech Connect (OSTI)

    Latta, A.F.; Bowyer, J.M.; Fujita, T.; Richter, P.H.

    1980-02-01T23:59:59.000Z

    This study determines the performance and cost of four 10 MWe advanced solar thermal electric power plants sited in various regions of the continental United States. The solar plants are conceptualized to begin commercial operation in the year 2000. It is assumed that major subsystem performance will have improved substantially as compared to that of pilot plants currently operating or under construction. The net average annual system efficiency is therefore roughly twice that of current solar thermal electric power plant designs. Similarly, capital costs reflecting goals based on high-volume mass production that are considered to be appropriate for the year 2000 have been used. These costs, which are approximately an order of magnitude below the costs of current experimental projects, are believed to be achievable as a result of the anticipated sizeable solar penetration into the energy market in the 1990 to 2000 timeframe. The paraboloidal dish, central receiver, cylindrical parabolic trough, and compound parabolic concentrators comprise the advanced collector concepts studied. All concepts exhibit their best performance when sited in regional areas such as the sunbelt where the annual insolation is high. The regional variation in solar plant performance has been assessed in relation to the expected rise in the future cost of residential and commercial electricity in the same regions. A discussion of the regional insolation data base, a description of the solar systems performance and costs, and a presentation of a range for the forecast cost of conventional electricity by region and nationally over the next several decades are given.

  9. Fall Webworm

    E-Print Network [OSTI]

    Ree, Bill

    2004-10-08T23:59:59.000Z

    The fall webworm is a common pest of trees and shrubs. This insect produces unsightly webs, and repeated infestations can damage plants. Control methods are most successful when one understands the pest's life cycle. This publication suggests...

  10. Fall 2013 945 277 Fall 2013 190 115 Fall 2012 957 150 Fall 2012 158 41

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    -122010-112009-102008-092007-082006-072005-062004-052003-04 Degrees Awarded Certificate/ Associate Bachelor Graduate 0% 10% 20% 30% 40% 50% 60% Fall 2013 Fall 2012

  11. AGU Fall Meeting 2014

    Broader source: Energy.gov [DOE]

    The American Geophysical Union's 47th Annual Fall Meeting will showcase groundbreaking research in the geosciences.

  12. Botswanafeaturing the VICTORIA FALLS

    E-Print Network [OSTI]

    Weaver, Harold A. "Hal"

    .alumni.jhu.edu AUGUST 6-19, 2015 #12;Victoria Falls N A T U R A L B E A U T Y | B O U N T I F U L W I L D L I F E | R IBotswanafeaturing the OKAVANGO DELTA plus VICTORIA FALLS AHI: 800-323-7373 www'll begin our journey with a visit to powerful Victoria Falls in Zambia, where you will take a sunset cruise

  13. Falls Creek Hydroelectric Project

    SciTech Connect (OSTI)

    Gustavus Electric Company; Richard Levitt; DOE Project Officer - Keith Bennett

    2007-06-12T23:59:59.000Z

    This project was for planning and construction of a 700kW hydropower project on the Fall River near Gustavus, Alaska.

  14. Insolation data manual: long-term monthly averages of solar radiation, temperature, degree-days and global anti K/sub T/ for 248 national weather service stations

    SciTech Connect (OSTI)

    Knapp, C L; Stoffel, T L; Whitaker, S D

    1980-10-01T23:59:59.000Z

    Monthly averaged data is presented which describes the availability of solar radiation at 248 National Weather Service stations. Monthly and annual average daily insolation and temperature values have been computed from a base of 24 to 25 years of data. Average daily maximum, minimum, and monthly temperatures are provided for most locations in both Celsius and Fahrenheit. Heating and cooling degree-days were computed relative to a base of 18.3/sup 0/C (65/sup 0/F). For each station, global anti K/sub T/ (cloudiness index) were calculated on a monthly and annual basis. (MHR)

  15. NWHA Fall Workshop & Tour

    Broader source: Energy.gov [DOE]

    This year’s Fall Regional Workshop on October 30 will focus on extending the longevity of our legacy hydropower projects through upgrades, refurbishment and life extensions, while meeting needs of...

  16. opposed to 19,000 to 23,000 years in the insolation record), indicating a more compli-

    E-Print Network [OSTI]

    . Pate, in Proceedings of the Ocean Drilling Program, Scientific Results, N. G. Pisias, T. R. Janecek, A. Palmer-Julson, T. H. van Andel, Eds. (Ocean Drilling Program, College Station, TX, 1995), vol. 138, pp. Exposing an elongated condensate to a single off-resonant laser beam resulted in the observation of highly

  17. Luminosity and beam-beam

    E-Print Network [OSTI]

    Papotti, G; Trad, G

    We report on observations on luminosity evolution and beam-beam interaction from the 2011 physics run. Extrapolations for 2012 are attempted and a list of desired studies and machine developments is included.

  18. 1 2 3 4 5 6 7 8 FALL SPRING FALL SPRING FALL SPRING FALL SPRING

    E-Print Network [OSTI]

    Stephens, Jacqueline

    four years to graduate. www.cm.lsu.edu (3) IEA Course Industry Emphasis Area (IEA) (see reverse Course offered in the Fall semester only IEA Courses (3) IEA Course (3) IEA Course (3) IEA Course Course is a Prerequisite to an IEA Course(s) Must make a "C" or better in the courseC C CC C C C C C CC C C C C CCC C CC

  19. The Sky is Falling

    E-Print Network [OSTI]

    Crawford, Amanda

    2005-01-01T23:59:59.000Z

    artificial ice crystals. Seeding takes place either below or above a cloud. In the first method, an aircraft's wings are mounted with flares burning silver iodide, which is then released beneath the cloud. The cloud's updraft carries the particles... enough to fall on their own. Silver iodide is a favored seeding agent because its crystalline composition is almost equal to the structure of ice crystals contained in convective clouds. Seeding with silver iodide can supply up to ten trillion...

  20. alamos science fall: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fall Term School and Major Department Fall 2007 Fall 2008 Fall 2009 Fall 2010 Fall 2011 Science 134 142 158 144 130 Electrical Engineering 110 118 131 127 126 Engineering...

  1. SAMPLE QUIZ 2 (Fall 2011)

    E-Print Network [OSTI]

    Quiz 2. MA/STAT 416 003. Fall 2011. Show detailed explanations. 1. Purdue plays against ... Compute the probability that the second marble taken is white. b.

  2. Fall Run | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. Category UC-lFederalFYRANDOMFailure Modes and Causes5Fall Run

  3. Beams 92: Proceedings. Volume 2, Ion beams, electron beams, diagnostics

    SciTech Connect (OSTI)

    Mosher, D.; Cooperstein, G. [eds.] [Naval Research Lab., Washington, DC (United States)] [eds.; Naval Research Lab., Washington, DC (United States)

    1993-12-31T23:59:59.000Z

    This report contains papers on the following topics. Ion beam papers; electron beam papers; and these papers have been indexed separately elsewhere.

  4. Albeni Falls Wildlife Mitigation Project

    E-Print Network [OSTI]

    from the Albeni Falls Hydroelectric Project #12;Biological Objective 1 Protect 900 acres of wetland hydroelectric project. · 1988 publication of the Final Report Albeni Falls Wildlife Protection, Mitigation effects on wildlife resulting from hydroelectric development. 2. Select target wildlife species

  5. 2006 Fall Meeting Search Results

    E-Print Network [OSTI]

    Zreda, Marek

    2006 Fall Meeting Search Results Cite abstracts as Author(s) (2006), Title, Eos Trans. AGU, 87 browsers. The iCronus project intends to create a publicly accessible website that contains published and weathering DE: 5475 Tectonics (8149) SC: Tectonophysics [T] MN: 2006 Fall Meeting #12;

  6. Accelerator beam profile analyzer

    DOE Patents [OSTI]

    Godel, Julius B. (Bayport, NY); Guillaume, Marcel (Grivegnee, BE); Lambrecht, Richard M. (East Quogue, NY); Withnell, Ronald (East Setauket, NY)

    1976-01-01T23:59:59.000Z

    A beam profile analyzer employing sector or quadrant plates each servo controlled to outline the edge of a beam.

  7. September 17, 2010 SLIPS, TRIPS, FALLS PREVENTION

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    September 17, 2010 SLIPS, TRIPS, FALLS PREVENTION Slips, trips and falls at UCDHS account for 18 and in an effort to reduce slips, trips and falls we offer the following "best practices" to consider: Be aware on floors Use slip resistant shoes in icy conditions (Home Health visits) SLIP and FALL PREVENTION TEAM

  8. MA 15400 ONLINE Fall 2014 Syllabus

    E-Print Network [OSTI]

    Delworth, Timothy J

    2014-09-14T23:59:59.000Z

    MA 15400 ONLINE Fall 2014 Syllabus. TEXTBOOK. COURSE WEBSITE. RECORDED LESSONS. HOMEWORK. QUIZZES. EXAMS. CALCULATORS. OFFICE ...

  9. UAA Leadership Honors Fall 2014

    E-Print Network [OSTI]

    Pantaleone, Jim

    UAA Leadership Honors Fall 2014 Purpose UAA Leadership Honors are awarded to individuals upon graduation to recognize and honor their leadership. Leadership activities and involvement must promote individual and collective growth

  10. UAA Leadership Honors Fall 2013

    E-Print Network [OSTI]

    Pantaleone, Jim

    1 UAA Leadership Honors Fall 2013 Purpose UAA Leadership their leadership contributions to the University of Alaska Anchorage while maintaining academic excellence. Leadership activities and involvement must promote individual

  11. Beam Status

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMForms About Batteries Batteries An error occurred. TryRing CurrentBeam

  12. Beam History

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWPAlumniComplex historian ...BESFor Users LiveBattling birdBeam

  13. Beam History

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWPAlumniComplex historian ...BESFor Users LiveBattlingBeam

  14. Beam geometry selection using sequential beam addition

    SciTech Connect (OSTI)

    Popple, Richard A., E-mail: rpopple@uabmc.edu; Brezovich, Ivan A.; Fiveash, John B. [Department of Radiation Oncology, The University of Alabama at Birmingham, 1720 2nd Avenue South, Birmingham, Alabama 35294 (United States)] [Department of Radiation Oncology, The University of Alabama at Birmingham, 1720 2nd Avenue South, Birmingham, Alabama 35294 (United States)

    2014-05-15T23:59:59.000Z

    Purpose: The selection of optimal beam geometry has been of interest since the inception of conformal radiotherapy. The authors report on sequential beam addition, a simple beam geometry selection method, for intensity modulated radiation therapy. Methods: The sequential beam addition algorithm (SBA) requires definition of an objective function (score) and a set of candidate beam geometries (pool). In the first iteration, the optimal score is determined for each beam in the pool and the beam with the best score selected. In the next iteration, the optimal score is calculated for each beam remaining in the pool combined with the beam selected in the first iteration, and the best scoring beam is selected. The process is repeated until the desired number of beams is reached. The authors selected three treatment sites, breast, lung, and brain, and determined beam arrangements for up to 11 beams from a pool comprised of 25 equiangular transverse beams. For the brain, arrangements were additionally selected from a pool of 22 noncoplanar beams. Scores were determined for geometries comprised equiangular transverse beams (EQA), as well as two tangential beams for the breast case. Results: In all cases, SBA resulted in scores superior to EQA. The breast case had the strongest dependence on beam geometry, for which only the 7-beam EQA geometry had a score better than the two tangential beams, whereas all SBA geometries with more than two beams were superior. In the lung case, EQA and SBA scores monotonically improved with increasing number of beams; however, SBA required fewer beams to achieve scores equivalent to EQA. For the brain case, SBA with a coplanar pool was equivalent to EQA, while the noncoplanar pool resulted in slightly better scores; however, the dose-volume histograms demonstrated that the differences were not clinically significant. Conclusions: For situations in which beam geometry has a significant effect on the objective function, SBA can identify arrangements equivalent to equiangular geometries but using fewer beams. Furthermore, SBA provides the value of the objective function as the number of beams is increased, allowing the planner to select the minimal beam number that achieves the clinical goals. The method is simple to implement and could readily be incorporated into an existing optimization system.

  15. Cowlitz Falls Fish Passage.

    SciTech Connect (OSTI)

    NONE

    1995-09-01T23:59:59.000Z

    The upper Cowlitz was once home to native salmon and steelhead. But the combined impacts of overharvest, farming, logging and road building hammered fish runs. And in the 1960s, a pair of hydroelectric dams blocked the migration path of ocean-returning and ocean-going fish. The lower Cowlitz still supports hatchery runs of chinook, coho and steelhead. But some 200 river miles in the upper river basin--much of it prime spawning and rearing habitat--have been virtually cut off from the ocean for over 26 years. Now the idea is to trap-and-haul salmon and steelhead both ways and bypass previously impassable obstacles in the path of anadromous fish. The plan can be summarized, for the sake of explanation, in three steps: (1) trap and haul adult fish--collect ocean-returning adult fish at the lowermost Cowlitz dam, and truck them upstream; (2) reseed--release the ripe adults above the uppermost dam, and let them spawn naturally, at the same time, supplement these runs with hatchery born fry that are reared and imprinted in ponds and net pens in the watershed; (3) trap and haul smolts--collection the new generation of young fish as they arrive at the uppermost Cowlitz dam, truck them past the three dams, and release them to continue their downstream migration to the sea. The critical part of any fish-collection system is the method of fish attraction. Scientists have to find the best combination of attraction system and screens that will guide young fish to the right spot, away from the turbine intakes. In the spring of 1994 a test was made of a prototype system of baffles and slots on the upriver face of the Cowlitz Falls Dam. The prototype worked at 90% efficiency in early tests, and it worked without the kind of expensive screening devices that have been installed on other dams. Now that the success of the attraction system has been verified, Harza engineers and consultants will design and build the appropriate collection part of the system.

  16. Lessons Learned: Peer Exchange Calls Fall 2014 | Department of...

    Energy Savers [EERE]

    Calls Fall 2014 Lessons Learned: Peer Exchange Calls Fall 2014 Better Buildings Residential Network, Lessons Learned: Peer Exchange Calls Fall 2014. Lessons Learned: Peer...

  17. CMPE 185 Fall 1999 Syllabus 1 Syllabus

    E-Print Network [OSTI]

    Karplus, Kevin

    CMPE 185 Fall 1999 Syllabus 1 Syllabus 1 Administrative details Location and timeKresge 327, MWF 2;2 Syllabus CMPE 185 Fall 1999 4 Special guest lecturers I may arrange

  18. CMPE 185 Fall 2000 Syllabus 1 Syllabus

    E-Print Network [OSTI]

    Karplus, Kevin

    CMPE 185 Fall 2000 Syllabus 1 Syllabus 1 Administrative details Location and timeKresge 327, MWF 2 Info 1 #12;2 Syllabus CMPE 185 Fall 2000 4

  19. almahata sitta fall: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Theory of Systems of First Order Linear Equations. 37 MGMT 585 2013 Fall1 2013 Fall Syllabus Mathematics Websites Summary: MGMT 585 2013 Fall1 2013 Fall Syllabus MGMT 585:...

  20. Fall 2013 Composite Data Products - Backup Power

    SciTech Connect (OSTI)

    Kurtz, J.; Sprik, S.; Ainscough, C.; Saur, G.; Post, M.; Peters, M.

    2013-12-01T23:59:59.000Z

    This report includes 28 composite data products (CDPs) produced in Fall 2013 for fuel cell backup power systems.

  1. Invite Paper Fall Technical Meeting

    E-Print Network [OSTI]

    Gomez, Alessandro

    within which it is sensible to make predictions, combustion is here to stay. In addition to oil1 Invite Paper Fall Technical Meeting of the Eastern States Section of the Combustion Institute: A Laboratory-Scale Benchmark for Turbulent Combustion Studies Alessandro Gomez Department of Mechanical

  2. Analysis of rock-fall and rock-fall avalanche seismograms in the French Alps

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    the source rock slope (Figure 1), the falling mass strikes the talus slope and breaks up and/or bounces1 Analysis of rock-fall and rock-fall avalanche seismograms in the French Alps J. Deparis, D reviews seismograms from 10 rock-fall events recorded between 1992 and 2001 by the permanent seismological

  3. Beam position monitor

    DOE Patents [OSTI]

    Alkire, Randy W.; Rosenbaum, Gerold; Evans, Gwyndaf

    2003-07-22T23:59:59.000Z

    An apparatus for determining the position of an x-ray beam relative to a desired beam axis. Where the apparatus is positioned along the beam path so that a thin metal foil target intersects the x-ray beam generating fluorescent radiation. A PIN diode array is positioned so that a portion of the fluorescent radiation is intercepted by the array resulting in an a series of electrical signals from the PIN diodes making up the array. The signals are then analyzed and the position of the x-ray beam is determined relative to the desired beam path.

  4. BEAMS3D Neutral Beam Injection Model

    SciTech Connect (OSTI)

    Lazerson, Samuel

    2014-04-14T23:59:59.000Z

    With the advent of applied 3D fi elds in Tokamaks and modern high performance stellarators, a need has arisen to address non-axisymmetric effects on neutral beam heating and fueling. We report on the development of a fully 3D neutral beam injection (NBI) model, BEAMS3D, which addresses this need by coupling 3D equilibria to a guiding center code capable of modeling neutral and charged particle trajectories across the separatrix and into the plasma core. Ionization, neutralization, charge-exchange, viscous velocity reduction, and pitch angle scattering are modeled with the ADAS atomic physics database [1]. Benchmark calculations are presented to validate the collisionless particle orbits, neutral beam injection model, frictional drag, and pitch angle scattering effects. A calculation of neutral beam heating in the NCSX device is performed, highlighting the capability of the code to handle 3D magnetic fields.

  5. Center for Beam Physics

    E-Print Network [OSTI]

    Chattopadhyay, S.

    2010-01-01T23:59:59.000Z

    interactions, ultra-high intensity lasers, 3D Laser Imagingconcepts, ultra-high intensity lasers, x-ray generation,interests: Ultra-high vacuum, particle beam and laser beam

  6. Center for Beam Physics

    E-Print Network [OSTI]

    Chattopadhyay, S.

    2010-01-01T23:59:59.000Z

    FEL Collaboration: Photocathode/SCRF Collaboration: Two-BeamUniversity on Photocathode/ SCRF technology, LBNL-BNL on

  7. Beam Dynamics for ARIA

    E-Print Network [OSTI]

    Ekdahl, Carl

    2015-01-01T23:59:59.000Z

    Beam dynamics issues are assessed for a new linear induction electron accelerator being designed for flash radiography of large explosively driven hydrodynamic experiments. Special attention is paid to equilibrium beam transport, possible emittance growth, and beam stability. It is concluded that a radiographic quality beam will be produced possible if engineering standards and construction details are equivalent to those on the present radiography accelerators at Los Alamos.

  8. IDENTIFYING ROOF FALL PREDICTORS USING FUZZY CLASSIFICATION

    SciTech Connect (OSTI)

    Bertoncini, C. A.; Hinders, M. K. [NDE Lab, College of William and Mary, Williamsburg, VA, 23187-8795 (United States)

    2010-02-22T23:59:59.000Z

    Microseismic monitoring involves placing geophones on the rock surfaces of a mine to record seismic activity. Classification of microseismic mine data can be used to predict seismic events in a mine to mitigate mining hazards, such as roof falls, where properly bolting and bracing the roof is often an insufficient method of preventing weak roofs from destabilizing. In this study, six months of recorded acoustic waveforms from microseismic monitoring in a Pennsylvania limestone mine were analyzed using classification techniques to predict roof falls. Fuzzy classification using features selected for computational ease was applied on the mine data. Both large roof fall events could be predicted using a Roof Fall Index (RFI) metric calculated from the results of the fuzzy classification. RFI was successfully used to resolve the two significant roof fall events and predicted both events by at least 15 hours before visual signs of the roof falls were evident.

  9. A fully relativistic radial fall

    E-Print Network [OSTI]

    Alessandro D. A. M. Spallicci; Patxi Ritter

    2014-07-21T23:59:59.000Z

    Radial fall has historically played a momentous role. It is one of the most classical problems, the solutions of which represent the level of understanding of gravitation in a given epoch. A {\\it gedankenexperiment} in a modern frame is given by a small body, like a compact star or a solar mass black hole, captured by a supermassive black hole. The mass of the small body itself and the emission of gravitational radiation cause the departure from the geodesic path due to the back-action, that is the self-force. For radial fall, as any other non-adiabatic motion, the instantaneous identity of the radiated energy and the loss of orbital energy cannot be imposed and provide the perturbed trajectory. In the first part of this letter, we present the effects due to the self-force computed on the geodesic trajectory in the background field. Compared to the latter trajectory, in the Regge-Wheeler, harmonic and all others smoothly related gauges, a far observer concludes that the self-force pushes inward (not outward) the falling body, with a strength proportional to the mass of the small body for a given large mass; further, the same observer notes an higher value of the maximal coordinate velocity, this value being reached earlier on during infall. In the second part of this letter, we implement a self-consistent approach for which the trajectory is iteratively corrected by the self-force, this time computed on osculating geodesics. Finally, we compare the motion driven by the self-force without and with self-consistent orbital evolution. Subtle differences are noticeable, even if self-force effects have hardly the time to accumulate in such a short orbit.

  10. Idaho Falls Power- Residential Weatherization Loan Program

    Broader source: Energy.gov [DOE]

    Residential customers with permanently installed electric heat who receive service from the City of Idaho Falls, are eligible for 0% weatherization loans. City Energy Service will conduct an...

  11. STAT 490 Fall 2012 Test 2

    E-Print Network [OSTI]

    Owner

    2014-06-29T23:59:59.000Z

    STAT 490. Fall 2012. Test 2. October 30, 2012. 1. Datsenka Dog Insurance Company has developed the following mortality table for dogs: Age xl. Age xl. 0.

  12. Chemistry of Organic Electronic Materials 6483-Fall

    E-Print Network [OSTI]

    Sherrill, David

    Chemistry of Organic Electronic Materials 6483- Fall Tuesdays organic materials. The discussion will include aspects of synthesis General introduction to the electronic structure of organic materials with connection

  13. Course Announcement MATH 450 -Fall 2005

    E-Print Network [OSTI]

    Course Announcement MATH 450 - Fall 2005 Mathematical Modeling of the Physical World Time: TR 9://www.math.psu.edu/belmonte/math450 05.html #12;

  14. High-Temperature Falling-Particle Receiver

    Broader source: Energy.gov (indexed) [DOE]

    | April 15, 2013 | Ho * This project employs modeling, design, testing, and optimization to further develop and improve key areas of falling particle receiver technology...

  15. High-Temperature Falling-Particle Receiver

    Broader source: Energy.gov (indexed) [DOE]

    | June 15, 2013 | Ho * This project employs modeling, design, testing, and optimization to further develop and improve key areas of falling particle receiver technology...

  16. falls-city2.cdr

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling7 AugustAFRICAN3uj:'I,\ W CTheuse of biotaFalls

  17. LBNL-46223, CBP Note 350 BEAM-BEAM SIMULATIONS FOR SEPARATED BEAMS IN THE LHC

    E-Print Network [OSTI]

    Furman, Miguel

    LBNL-46223, CBP Note 350 BEAM-BEAM SIMULATIONS FOR SEPARATED BEAMS IN THE LHC M. A. Furman, W. C. Turner, Center for Beam Physics, LBNL, Berkeley, CA 94720, USA Abstract We present beam-beam simulation of simulations: (a) to as- sess undesirable effects from LBNL's luminosity monitor- ing scheme for the LHC [2

  18. LBNL-45363, CBP Note 333 BEAM-BEAM SIMULATIONS FOR SEPARATED BEAMS

    E-Print Network [OSTI]

    Furman, Miguel

    LBNL-45363, CBP Note 333 BEAM-BEAM SIMULATIONS FOR SEPARATED BEAMS Miguel A. Furman, Center for Beam Physics, LBNL, Berkeley, CA 94720 Abstract We present beam-beam simulation results from a strong undesirable effects from LBNL's sweeping lumi- nosity monitoring scheme for the LHC [1], and (b) to assess

  19. RiverFalls,Wisconsin SolarinSmall

    E-Print Network [OSTI]

    ), which services approximately 5,800 customers, the largest being UW-RF.ii Together, the utility are solar (most are biogas and wind), the program has helped to raise awareness and interest in renewable energy within the community.v Bringing Solar to River Falls The success of the River Falls Renewable

  20. Fall 2013 Edition Editor-in-Chief

    E-Print Network [OSTI]

    Lennard, William N.

    Musings of Brescia Fall 2013 Edition Editor-in-Chief Alicia Moore Editor Shelly Harder #12, rousing him from a nap. I held him up by one gangly, black arm. His marble brown eyes were shiny always occurred to me that TJ could fall apart at any moment. His arms were already feeling a bit loose

  1. Population Analysis, Fall 2005 1 Population Analyses

    E-Print Network [OSTI]

    Clark, William R.

    Population Analysis, Fall 2005 1 Population Analyses EEOB/AEcl 611 Fall Semester 2005 Scheduled Phone: 294-5176 email: wrclark@iastate.edu AEcl 611 is evolving in response to very rapid changes. The emphasis in AEcl 611 is on understanding the statistical basis of various analytical techniques, applying

  2. CURRICULUM VITAE Andrs Fall, Ph.D.

    E-Print Network [OSTI]

    Yang, Zong-Liang

    -0140 Cell: (512) 810-2335 Updated: May 20, 2014 Academic Background 2005-2008 Ph.D. Virginia Tech-poor to 4-excellent. #12;Dr. András Fall - Vitae 3 Selected Publications Peer reviewed journal articles in shale: a review. Accepted pending revisions, AAPG Bulletin. 7. Fall, A., Eichhubl, P., Bodnar, R

  3. Measurement of the curvature of a surface using parallel light beams

    DOE Patents [OSTI]

    Chason, E.H.; Floro, J.A.; Seager, C.H.; Sinclair, M.B.

    1999-06-15T23:59:59.000Z

    Apparatus is disclosed for measuring curvature of a surface wherein a beam of collimated light is passed through a means for producing a plurality of parallel light beams each separated by a common distance which then reflect off the surface to fall upon a detector that measures the separation of the reflected beams of light. This means can be an etalon and the combination of a diffractive element and a converging lens. The curvature of the surface along the line onto which the multiple beams fall can be calculated from this information. A two-dimensional map of the curvature can be obtained by adding a second etalon (or a second combination of a diffractive element and a converging lens) which is rotated 90[degree] about the optical axis relative to the first etalon and inclined at the same angle. The second etalon creates an individual set of parallel light beams from each of the individual beams created by the first etalon with the sets of parallel light beams from the second etalon rotated 90[degree] relative to the line onto which the single set of parallel beams from the first etalon would have fallen. 5 figs.

  4. Measurement of the curvature of a surface using parallel light beams

    DOE Patents [OSTI]

    Chason, Eric H. (Sandia Park, NM); Floro, Jerrold A. (Edgewood, NM); Seager, Carleton H. (Albuquerque, NM); Sinclair, Michael B. (Albuquerque, NM)

    1999-01-01T23:59:59.000Z

    Apparatus for measuring curvature of a surface wherein a beam of collimated light is passed through means for producing a plurality of parallel light beams each separated by a common distance which then reflect off the surface to fall upon a detector that measures the separation of the reflected beams of light. This means can be an etalon and the combination of a diffractive element and a converging lens. The curvature of the surface along the line onto which the multiple beams fall can be calculated from this information. A two-dimensional map of the curvature can be obtained by adding a second etalon (or a second combination of a diffractive element and a converging lens) which is rotated 90.degree. about the optical axis relative to the first etalon and inclined at the same angle. The second etalon creates an individual set of parallel light beams from each of the individual beams created by the first etalon with the sets of parallel light beams from the second etalon rotated 90.degree. relative to the line onto which the single set of parallel beams from the first etalon would have fallen.

  5. Fall Lectures Feature Life of Einstein; Exploring Our World With...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fall Lectures Feature Life of Einstein; Exploring Our World With Particle Accelerators NEWPORT NEWS, Va., Sept. 22, 2010 - Jefferson Lab's first 2010 Fall Science Series lecture,...

  6. City of Klamath Falls District Heating District Heating Low Temperatur...

    Open Energy Info (EERE)

    Geothermal Facility Jump to: navigation, search Name City of Klamath Falls District Heating District Heating Low Temperature Geothermal Facility Facility City of Klamath Falls...

  7. FUPWG Fall 2009 Washington Update | Department of Energy

    Office of Environmental Management (EM)

    FUPWG Fall 2009 Washington Update FUPWG Fall 2009 Washington Update Presentation covers the 2009 Federal Utility Partnership Working Group (FUPWG) Washington update to the Lighting...

  8. Methods of Beam Cooling

    E-Print Network [OSTI]

    Sessler, A. M.

    2008-01-01T23:59:59.000Z

    of Optical Stochastic Cooling", presented at PAC, (1995).1991). Hangst, J. , "Laser Cooling of a Stored Ion Beam - ATheorem and Phase Space Cooling", Proceedings of the

  9. Broad beam ion implanter

    DOE Patents [OSTI]

    Leung, Ka-Ngo (Hercules, CA)

    1996-01-01T23:59:59.000Z

    An ion implantation device for creating a large diameter, homogeneous, ion beam is described, as well as a method for creating same, wherein the device is characterized by extraction of a diverging ion beam and its conversion by ion beam optics to an essentially parallel ion beam. The device comprises a plasma or ion source, an anode and exit aperture, an extraction electrode, a divergence-limiting electrode and an acceleration electrode, as well as the means for connecting a voltage supply to the electrodes.

  10. Courses on Beam Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is an incomplete listing of course available for beam physics. United States Particle Accelerator School The US Particle Accelerator School provides educational programs in the...

  11. Laser beam generating apparatus

    DOE Patents [OSTI]

    Warner, B.E.; Duncan, D.B.

    1994-02-15T23:59:59.000Z

    Laser beam generating apparatus including a septum segment disposed longitudinally within the tubular structure of the apparatus is described. The septum provides for radiatively dissipating heat buildup within the tubular structure and for generating relatively uniform laser beam pulses so as to minimize or eliminate radial pulse delays (the chevron effect). 7 figures.

  12. Laser beam generating apparatus

    DOE Patents [OSTI]

    Warner, B.E.; Duncan, D.B.

    1993-12-28T23:59:59.000Z

    Laser beam generating apparatus including a septum segment disposed longitudinally within the tubular structure of the apparatus. The septum provides for radiatively dissipating heat buildup within the tubular structure and for generating relatively uniform laser beam pulses so as to minimize or eliminate radial pulse delays (the chevron effect). 11 figures.

  13. First Beam to FACET

    SciTech Connect (OSTI)

    Erickson, R.; Clarke, C.; Colocho, W.; Decker, F.-J.; Hogan, M.; Kalsi, S.; Lipkowitz, N.; Nelson, J.; Phinney, N.; Schuh, P.; Sheppard, J.; Smith, H.; Smith, T.; Stanek, M.; Turner, J.; Warren, J.; Weathersby, S.; Wienands, U.; Wittmer, W.; Woodley, M.; Yocky, G.; /SLAC

    2011-12-13T23:59:59.000Z

    The SLAC 3km linear electron accelerator has been reconfigured to provide a beam of electrons to the new Facility for Advanced Accelerator Experimental Tests (FACET) while simultaneously providing an electron beam to the Linac Coherent Light Source (LCLS). On June 23, 2011, the first electron beam was transported through this new facility. Commissioning of FACET is in progress. On June 23, 2011, an electron beam was successfully transported through the new FACET system to a dump in Sector 20 in the linac tunnel. This was achieved while the last third of the linac, operating from the same control room, but with a separate injector system, was providing an electron beam to the Linac Coherent Light Source (LCLS), demonstrating that concurrent operation of the two facilities is practical. With the initial checkout of the new transport line essentially complete, attention is now turning toward compressing the electron bunches longitudinally and focusing them transversely to support a variety of accelerator science experiments.

  14. STOCHASTIC COOLING OF BUNCHED BEAMS

    E-Print Network [OSTI]

    Bisognano, J.J.

    2010-01-01T23:59:59.000Z

    March 11-13, 1981 STOCHASTIC COOLING OF BUNCHED BEAMS J.J.W-7406-BW-48 STOCHASTIC COOLING OF BUNCHED BEAMS* J.J.longitudinal stochastic cooling of bunched particle beams.

  15. CNR GRADUATION SURVEY RESULTS Fall, 2001

    E-Print Network [OSTI]

    CNR GRADUATION SURVEY RESULTS Fall, 2001 Received 79 completed surveys out of 126 students who graduated in Dec, 2001 21 (27%) Have fulltime positions (9 temporary and 12 permanent) 3 (4

  16. DEAN'S LIST HONORABLE MENTION Fall Semester 2010

    E-Print Network [OSTI]

    Wong, Pak Kin

    DEAN'S LIST HONORABLE MENTION Fall Semester 2010 Brown, Bryant P. Brown, Dustin H. Campbell Laughlin, Amanda Diane Lemieux, Sydnie Lynn Lesnewski, Michael Phillip Lester, David Ernest Li, Crystal Gan

  17. Fall 2012 FUPWG Meeting Welcome: Southern Company

    Broader source: Energy.gov [DOE]

    Presentation—given at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers the Southern Company's retail service territory, financials, customers and sales, power generation, U.S. military projects, and more.

  18. Cedar Falls Utilities- Residential New Construction Program

    Broader source: Energy.gov [DOE]

    Cedar Falls Utilities offers incentives to residential customers who construct new energy efficient homes. A rate discount of 25% is available to customers who meet the 5 Star Home Program criteria...

  19. Fall Back Daylight Savings time is November

    E-Print Network [OSTI]

    Linsley, Braddock K.

    Fall Back ­ Daylight Savings time is November 2nd.The Energy Policy Act of 2005 changed both the starting and ending dates. Beginning in 2007, daylight time starts on the second Sunday in March and ends

  20. STAT 416 Fall 2014 Homework 6 Solutions

    E-Print Network [OSTI]

    2014-11-03T23:59:59.000Z

    Nov 3, 2014 ... STAT 416 Fall 2014. Homework 6 Solutions ... 4.35 Let X denote the winnings. P (X = 1.1) = P (both marbles red) + P (both marbles blue) = 2. (5.

  1. River Falls Municipal Utilities- Distributed Solar Tariff

    Broader source: Energy.gov [DOE]

    River Falls Municipal Utilities (RFMU), a member of WPPI Energy, offers a special energy purchase rate to its customers that generate electricity using solar photovoltaic (PV) systems. The special...

  2. AMST Courses --Fall 2014 Tulsa Based Classes

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    AMST Courses -- Fall 2014 Tulsa Based Classes: Globalization & Am Culture AMST 3253 Gray M 4 in trips to the Philbrook, Philbrook Downtown, and Gilcrease Museums and attend events of the Tulsa

  3. Utility Variable Generation Integration Group Fall Technical...

    Broader source: Energy.gov (indexed) [DOE]

    15, 2014 9:00AM CDT to October 17, 2014 3:00PM CDT The Utility Variable Generation Integration Group (UVIG) Fall Technical Workshop in San Antonio, Texas will provide attendees...

  4. Math 373 Fall 2012 Test 2

    E-Print Network [OSTI]

    Owner

    2014-06-29T23:59:59.000Z

    Copyright Jeffrey A Beckley. Math 373. Fall 2012. Test 2. October 18, 2012. 1. Jordan has the option to purchase either of the two bonds below. Both bonds will

  5. Environmental Research Group 2014 Fall Seminar Series

    E-Print Network [OSTI]

    Environmental Research Group 2014 Fall Seminar Series October 24, 2014 Gregg 320, 12:00 ­ 1 of five hours, the city of Boston would have sustained even more damage from Hurricane Sandy than New York

  6. Quantifying Temperature Effects on Fall Chinook Salmon

    SciTech Connect (OSTI)

    Jager, Yetta [ORNL

    2011-11-01T23:59:59.000Z

    The motivation for this study was to recommend relationships for use in a model of San Joaquin fall Chinook salmon. This report reviews literature pertaining to relationships between water temperature and fall Chinook salmon. The report is organized into three sections that deal with temperature effects on development and timing of freshwater life stages, temperature effects on incubation survival for eggs and alevin, and temperature effects on juvenile survival. Recommendations are made for modeling temperature influences for all three life stages.

  7. Retrofit Savings Determination for Wichita Falls Independent School District

    E-Print Network [OSTI]

    Shao, X.; Baltazar-Cervantes, J. C.; Claridge, D. E.

    2001-01-01T23:59:59.000Z

    Laboratory Wichita Falls ISD Texas A&M University Carrigan Center Energy Systems Laboratory Texas Engineering Experiment station Wichita Falls ISD Texas A&M University College Station. TX Carrigan Center Energy Systems Laboratory Wichita Falls ISO Texas A...&M University Denver Center Energy Systems Laboratory Texas Engineering Experiment Station Wichita Falls ISD Texas A&M University College station. TX Denver Center Energy Systems Laboratory Wichita Falls ISO Texas A&M University Fannin Elementary Energy Systems...

  8. Simulations of beam-beam and beam-wire interactions in RHIC

    SciTech Connect (OSTI)

    Kim, Hyung J.; Sen, Tanaji; /Fermilab; Abreu, Natalia P.; Fischer, Wolfram; /Brookhaven

    2009-02-01T23:59:59.000Z

    The beam-beam interaction is one of the dominant sources of emittance growth and luminosity lifetime deterioration. A current carrying wire has been proposed to compensate long-range beam-beam effects in the LHC and strong localized long-range beam-beam effects are experimentally investigated in the RHIC collider. Tune shift, beam transfer function, and beam loss rate are measured in dedicated experiments. In this paper, they report on simulations to study the effect of beam-wire interactions based on diffusive apertures, beam loss rates, and beam transfer function using a parallelized weak-strong beam simulation code (BBSIMC). The simulation results are compared with measurements performed in RHIC during 2007 and 2008.

  9. Ion beam lithography system

    DOE Patents [OSTI]

    Leung, Ka-Ngo

    2005-08-02T23:59:59.000Z

    A maskless plasma-formed ion beam lithography tool provides for patterning of sub-50 nm features on large area flat or curved substrate surfaces. The system is very compact and does not require an accelerator column and electrostatic beam scanning components. The patterns are formed by switching beamlets on or off from a two electrode blanking system with the substrate being scanned mechanically in one dimension. This arrangement can provide a maskless nano-beam lithography tool for economic and high throughput processing.

  10. Coherent beam-beam mode in the LHC

    E-Print Network [OSTI]

    Buffat, X; Giachino, R; Herr, W; Papotti, G; Pieloni, T; White, S

    2014-01-01T23:59:59.000Z

    Observations of single bunch beam-beam coherent modes during dedicated experiments in the LHC are presented. Their role in standard operation for physics is discussed and, in particular, candidates of beam-beam coherent mode driven unstable by the machine impedance are presented.

  11. Focused ion beam system

    DOE Patents [OSTI]

    Leung, K.; Gough, R.A.; Ji, Q.; Lee, Y.Y.

    1999-08-31T23:59:59.000Z

    A focused ion beam (FIB) system produces a final beam spot size down to 0.1 {mu}m or less and an ion beam output current on the order of microamps. The FIB system increases ion source brightness by properly configuring the first (plasma) and second (extraction) electrodes. The first electrode is configured to have a high aperture diameter to electrode thickness aspect ratio. Additional accelerator and focusing electrodes are used to produce the final beam. As few as five electrodes can be used, providing a very compact FIB system with a length down to only 20 mm. Multibeamlet arrangements with a single ion source can be produced to increase throughput. The FIB system can be used for nanolithography and doping applications for fabrication of semiconductor devices with minimum feature sizes of 0.1 m or less. 13 figs.

  12. Final focus test beam

    SciTech Connect (OSTI)

    Not Available

    1991-03-01T23:59:59.000Z

    This report discusses the following: the Final Focus Test Beam Project; optical design; magnets; instrumentation; magnetic measurement and BPM calibration; mechanical alignment and stabilization; vacuum system; power supplies; control system; radiation shielding and personnel protection; infrastructure; and administration.

  13. Pulsed ion beam source

    DOE Patents [OSTI]

    Greenly, John B. (Lansing, NY)

    1997-01-01T23:59:59.000Z

    An improved pulsed ion beam source having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center.

  14. LHC beam behaviour

    E-Print Network [OSTI]

    Herr, W

    2010-01-01T23:59:59.000Z

    An attempt is made to extract information on the LHC beam behaviour and dynamics from the observations made during the first runs in 2009. Although no systematic studies have been made, some basic properties can be established and in particular the observations in the presence of two beams and in collision are studied. They are analyzed in view of the foreseen runs at higher energy and possible improvements are proposed.

  15. China's forest products trade falls nearly 18% China's forest products trade falls nearly 18%

    E-Print Network [OSTI]

    China's forest products trade falls nearly 18% China's forest products trade falls nearly 18% 11/08/2009 - 09:05 According to China's latest Customs statistics, foreign trade of China's forest products in the first five months showed a year-on-year general downturn. The total value of foreign trade of China

  16. Classes Entering Fall 2009 and Fall 2010 Last Name: First Name: Middle Ini2al

    E-Print Network [OSTI]

    Afshari, Ehsan

    Classes Entering Fall 2009 and Fall 2010 Last Name: First Name: Middle Ini2 ini2als for agreement: Date: From the courses listed in the tables above, iden2fy Wri2ng Advisor Approved Ini2als: Date: Probability & Sta2s2cs Final ECE Approval: Advanced

  17. Interior cavern conditions and salt fall potential

    SciTech Connect (OSTI)

    Munson, D.E.; Molecke, M.A. [Sandia National Labs., Albuquerque, NM (United States); Myers, R.E. [Strategic Petroleum Reserve, New Orleans, LA (United States)

    1998-03-01T23:59:59.000Z

    A relatively large number of salt caverns are used for fluid hydrocarbon storage, including an extensive set of facilities in the Gulf Coast salt domes for the Strategic Petroleum Reserve (SPR) Program. Attention is focused on the SPR caverns because of available histories that detail events involving loss and damage of the hanging string casing. The total number of events is limited, making the database statistically sparse. The occurrence of the events is not evenly distributed, with some facilities, and some caverns, more susceptible than others. While not all of these events could be attributed to impacts from salt falls, many did show the evidence of such impacts. As a result, a study has been completed to analyze the potential for salt falls in the SPR storage caverns. In this process, it was also possible to deduce some of the cavern interior conditions. Storage caverns are very large systems in which many factors could possibly play a part in casing damage. In this study, all of the potentially important factors such as salt dome geology, operational details, and material characteristics were considered, with all being logically evaluated and most being determined as secondary in nature. As a result of the study, it appears that a principal factor in determining a propensity for casing damage from salt falls is the creep and fracture characteristics of salt in individual caverns. In addition the fracture depends strongly upon the concentration of impurity particles in the salt. Although direct observation of cavern conditions is not possible, the average impurity concentration and the accumulation of salt fall material can be determined. When this is done, there is a reasonable correlation between the propensity for a cavern to show casing damage events and accumulation of salt fall material. The accumulation volumes of salt fall material can be extremely large, indicating that only a few of the salt falls are large enough to cause impact damage.

  18. Wire Scanner Beam Profile Measurements: LANSCE Facility Beam Development

    SciTech Connect (OSTI)

    Gilpatrick, John D. [Los Alamos National Laboratory; Batygin, Yuri K. [Los Alamos National Laboratory; Gonzales, Fermin [Los Alamos National Laboratory; Gruchalla, Michael E. [Los Alamos National Laboratory; Kutac, Vincent G. [Los Alamos National Laboratory; Martinez, Derwin [Los Alamos National Laboratory; Sedillo, James Daniel [Los Alamos National Laboratory; Pillai, Chandra [Los Alamos National Laboratory; Rodriguez Esparza, Sergio [Los Alamos National Laboratory; Smith, Brian G. [Los Alamos National Laboratory

    2012-05-15T23:59:59.000Z

    The Los Alamos Neutron Science Center (LANSCE) is replacing Wire Scanner (WS) beam profile measurement systems. Three beam development tests have taken place to test the new wire scanners under beam conditions. These beam development tests have integrated the WS actuator, cable plant, electronics processors and associated software and have used H{sup -} beams of different beam energy and current conditions. In addition, the WS measurement-system beam tests verified actuator control systems for minimum profile bin repeatability and speed, checked for actuator backlash and positional stability, tested the replacement of simple broadband potentiometers with narrow band resolvers, and tested resolver use with National Instruments Compact Reconfigurable Input and Output (cRIO) Virtual Instrumentation. These beam tests also have verified how trans-impedance amplifiers react with various types of beam line background noise and how noise currents were not generated. This paper will describe these beam development tests and show some resulting data.

  19. Photon beam position monitor

    DOE Patents [OSTI]

    Kuzay, T.M.; Shu, D.

    1995-02-07T23:59:59.000Z

    A photon beam position monitor is disclosed for use in the front end of a beamline of a high heat flux and high energy photon source such as a synchrotron radiation storage ring detects and measures the position and, when a pair of such monitors are used in tandem, the slope of a photon beam emanating from an insertion device such as a wiggler or an undulator inserted in the straight sections of the ring. The photon beam position monitor includes a plurality of spaced blades for precisely locating the photon beam, with each blade comprised of chemical vapor deposition (CVD) diamond with an outer metal coating of a photon sensitive metal such as tungsten, molybdenum, etc., which combination emits electrons when a high energy photon beam is incident upon the blade. Two such monitors are contemplated for use in the front end of the beamline, with the two monitors having vertically and horizontally offset detector blades to avoid blade ''shadowing''. Provision is made for aligning the detector blades with the photon beam and limiting detector blade temperature during operation. 18 figs.

  20. Single element laser beam shaper

    DOE Patents [OSTI]

    Zhang, Shukui (Yorktown, VA); Michelle D. Shinn (Newport News, VA)

    2005-09-13T23:59:59.000Z

    A single lens laser beam shaper for converting laser beams from any spatial profile to a flat-top or uniform spatial profile. The laser beam shaper includes a lens having two aspheric surfaces. The beam shaper significantly simplifies the overall structure in comparison with conventional 2-element systems and therefore provides great ease in alignment and reduction of cost.

  1. Electronic Out-fall Inspection Application - 12007

    SciTech Connect (OSTI)

    Weymouth, A Kent III; Pham, Minh; Messick, Chuck [Savannah River Nuclear Solutions, Aiken, South Carolina 29808 (United States)

    2012-07-01T23:59:59.000Z

    In early 2009 an exciting opportunity was presented to the Geographic Information Systems (GIS) team at the Savannah River Site (SRS). The SRS maintenance group was directed to maintain all Out-falls on Site, increasing their workload from 75 to 183 out-falls with no additional resources. The existing out-fall inspection system consisted of inspections performed manually and documented via paper trail. The inspections were closed out upon completion of activities and placed in file cabinets with no central location for tracking/trending maintenance activities. A platform for meeting new improvements required for documentation by the Department of Health and Environmental Control (DHEC) out-fall permits was needed to replace this current system that had been in place since the 1980's. This was accomplished by building a geographically aware electronic application that improved reliability of site out-fall maintenance and ensured consistent standards were maintained for environmental excellence and worker efficiency. Inspections are now performed via tablet and uploaded to a central point. Work orders are completed and closed either in the field using tablets (mobile application) or in their offices (via web portal) using PCs. And finally completed work orders are now stored in a central database allowing trending of maintenance activities. (authors)

  2. You have remarkable ideas. share them at the Falling Walls lab!

    E-Print Network [OSTI]

    Heermann, Dieter W.

    of the falling wallS lab + conference berlin 8/9 nov 2012 aPPlYnoW!www.falling-walls.com/lab THE FALLING WALLS

  3. Seismic and Acoustic Investigations of Rock Fall Initiation, Processes, and Mechanics

    E-Print Network [OSTI]

    Zimmer, Valerie Louise

    2011-01-01T23:59:59.000Z

    systems  and  rock  fall  source  and  impact  areas,  it  meters  from  a  rock  fall  source  area.   The   success  possible  to  the  rock  fall  source  areas,   spacing  

  4. ICFA Beam Dynamics Newsletter

    SciTech Connect (OSTI)

    Ben-Zvi I.; Kuczewski A.; Altinbas, Z.; Beavis, D.; Belomestnykh,; Dai, J. et al

    2012-07-01T23:59:59.000Z

    The Collider-Accelerator Department at Brookhaven National Laboratory is building a high-brightness 500 mA capable Energy Recovery Linac (ERL) as one of its main R&D thrusts towards eRHIC, the polarized electron - hadron collider as an upgrade of the operating RHIC facility. The ERL is in final assembly stages, with injection commisioning starting in October 2012. The objective of this ERL is to serve as a platform for R&D into high current ERL, in particular issues of halo generation and control, Higher-Order Mode (HOM) issues, coherent emissions for the beam and high-brightness, high-power beam generation and preservation. The R&D ERL features a superconducting laser-photocathode RF gun with a high quantum efficiency photoccathode served with a load-lock cathode delivery system, a highly damped 5-cell accelerating cavity, a highly flexible single-pass loop and a comprehensive system of beam instrumentation. In this ICFA Beam Dynamics Newsletter article we will describe the ERL in a degree of detail that is not usually found in regular publications. We will discuss the various systems of the ERL, following the electrons from the photocathode to the beam dump, cover the control system, machine protection etc and summarize with the status of the ERL systems.

  5. Beam Profile Measurement in MTA Beam Line for High Pressure RF Cavity Beam Test

    SciTech Connect (OSTI)

    Jana, M.R.; Bross, A.; Chung, M.; Greer, S.; Johnstone, C.; Kobilarcik, T.; Koizumi, G.; Leonova, M.; Moretti, A.; Popovic, M.; Schwartz, T.; /Fermilab /IIT, Chicago /PDT, Torino

    2012-05-15T23:59:59.000Z

    Recent High Pressure RF (HPRF) cavity experiment at MuCool Test Area (MTA) has used 400 MeV Linac proton beam to study the beam loading effect. When the energetic proton beam passes through the cavity, it ionizes the inside gas and produces the electrons. These electrons consume RF power inside the cavity. Number of electrons produced per cm inside the cavity (at 950 psi Hydrogen gas) per incident proton is {approx} 1200. The measurement of beam position and profile are necessary. MTA is flammable gas (Hydrogen) hazard zone so we have developed a passive beam diagnostic instrument using Chromox-6 scintillation screen and CCD camera. This paper presents quantitative information about beam position and beam profile. Neutral density filter was used to avoid saturation of CCD camera. Image data is filtered and fitted with Gaussian function to compute the beam size. The beam profile obtained from scintillation screen shall be compared with multi-wire beam profile.

  6. ARM - Field Campaign - Fall 2002 SCM IOP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032)8LigovCampaignsCLEX-5govCampaignsFall 1997 Cloud IOPgovCampaignsFall

  7. Beam Profile Monitor With Accurate Horizontal And Vertical Beam Profiles

    DOE Patents [OSTI]

    Havener, Charles C [Knoxville, TN; Al-Rejoub, Riad [Oak Ridge, TN

    2005-12-26T23:59:59.000Z

    A widely used scanner device that rotates a single helically shaped wire probe in and out of a particle beam at different beamline positions to give a pair of mutually perpendicular beam profiles is modified by the addition of a second wire probe. As a result, a pair of mutually perpendicular beam profiles is obtained at a first beamline position, and a second pair of mutually perpendicular beam profiles is obtained at a second beamline position. The simple modification not only provides more accurate beam profiles, but also provides a measurement of the beam divergence and quality in a single compact device.

  8. Grazing incidence beam expander

    SciTech Connect (OSTI)

    Akkapeddi, P.R.; Glenn, P.; Fuschetto, A.; Appert, Q.; Viswanathan, V.K.

    1985-01-01T23:59:59.000Z

    A Grazing Incidence Beam Expander (GIBE) telescope is being designed and fabricated to be used as an equivalent end mirror in a long laser resonator cavity. The design requirements for this GIBE flow down from a generic Free Electron Laser (FEL) resonator. The nature of the FEL gain volume (a thin, pencil-like, on-axis region) dictates that the output beam be very small. Such a thin beam with the high power levels characteristic of FELs would have to travel perhaps hundreds of meters or more before expanding enough to allow reflection from cooled mirrors. A GIBE, on the other hand, would allow placing these optics closer to the gain region and thus reduces the cavity lengths substantially. Results are presented relating to optical and mechanical design, alignment sensitivity analysis, radius of curvature analysis, laser cavity stability analysis of a linear stable concentric laser cavity with a GIBE. Fabrication details of the GIBE are also given.

  9. Beam characteristics of energy-matched flattening filter free beams

    SciTech Connect (OSTI)

    Paynter, D.; Weston, S. J.; Cosgrove, V. P. [St James Institute of Oncology The Leeds Teaching Hospitals NHS Trust, Medical Physics, Leeds LS9 7TF (United Kingdom)] [St James Institute of Oncology The Leeds Teaching Hospitals NHS Trust, Medical Physics, Leeds LS9 7TF (United Kingdom); Evans, J. A. [LIGHT Institute University of Leeds Leeds LS2 9JT, Division of Medical Physics, Leeds (United Kingdom)] [LIGHT Institute University of Leeds Leeds LS2 9JT, Division of Medical Physics, Leeds (United Kingdom); Thwaites, D. I. [LIGHT Institute University of Leeds Leeds LS2 9JT, Division of Medical Physics, Leeds, United Kingdom and Institute of Medical Physics, School of Physics, University of Sydney (Australia)] [LIGHT Institute University of Leeds Leeds LS2 9JT, Division of Medical Physics, Leeds, United Kingdom and Institute of Medical Physics, School of Physics, University of Sydney (Australia)

    2014-05-15T23:59:59.000Z

    Purpose: Flattening filter free (FFF) linear accelerators can increase treatment efficiency and plan quality. There are multiple methods of defining a FFF beam. The Elekta control system supports tuning of the delivered FFF beam energy to enable matching of the percentage depth-dose (PDD) of the flattened beam at 10 cm depth. This is compared to FFF beams where the linac control parameters are identical to those for the flattened beam. All beams were delivered on an Elekta Synergy accelerator with an Agility multi-leaf collimator installed and compared to the standard, flattened beam. The aim of this study is to compare “matched” FFF beams to both “unmatched” FFF beams and flattened beams to determine the benefits of matching beams. Methods: For the three modes of operation 6 MV flattened, 6 MV matched FFF, 6 MV unmatched FFF, 10 MV flattened, 10 MV matched FFF, and 10 MV unmatched FFF beam profiles were obtained using a plotting tank and were measured in steps of 0.1 mm in the penumbral region. Beam penumbra was defined as the distance between the 80% and 20% of the normalized dose when the inflection points of the unflattened and flattened profiles were normalized with the central axis dose of the flattened field set as 100%. PDD data was obtained at field sizes ranging from 3 cm × 3 cm to 40?cm × 40 cm. Radiation protection measurements were additionally performed to determine the head leakage and environmental monitoring through the maze and primary barriers. Results: No significant change is made to the beam penumbra for FFF beams with and without PDD matching, the maximum change in penumbra for a 10 cm × 10 cm field was within the experimental error of the study. The changes in the profile shape with increasing field size are most significant for the matched FFF beam, and both FFF beams showed less profile shape variation with increasing depth when compared to flattened beams, due to consistency in beam energy spectra across the radiation field. The PDDs of the FFF beams showed less variation with field size, the d{sub max} value was deeper for the matched FFF beam than the FFF beam and deeper than the flattened beam for field sizes greater than 5 cm × 5 cm. The head leakage when using the machine in FFF mode is less than half that for a flattened beam, but comparable for both FFF modes. The radiation protection dose-rate measurements show an increase of instantaneous dose-rates when operating the machines in FFF mode but that increase is less than the ratio of MU/min produced by the machine. Conclusions: The matching of a FFF beam to a flattened beam at a depth of 10 cm in water by increasing the FFF beam energy does not reduce any of the reported benefits of FFF beams. Conversely, there are a number of potential benefits resulting from matching the FFF beam; the depth of maximum dose is deeper, the out of field dose is potentially reduced, and the beam quality and penetration more closely resembles the flattened beams currently used in clinical practice, making dose distributions in water more alike. Highlighted in this work is the fact that some conventional specifications and methods for measurement of beam parameters such as penumbra are not relevant and further work is required to address this situation with respect to “matched” FFF beams and to determine methods of measurement that are not reliant on an associated flattened beam.

  10. Modulator considerations for beam chopping in the low energy beam transport at the SSC Laboratory

    SciTech Connect (OSTI)

    Anderson, D.; Pappas, G.

    1991-06-01T23:59:59.000Z

    Beam chopping in the low energy transport line at the Superconducting Super Collider Laboratory is accomplished using an electrostatic deflection system. LINAC requirements dictate the design of two modulators operating at 10 Hz with rise and fall times (as measured from approximately 10--99%) of {approximately}100 ns. Design of the first pulser, normally at 10 kV and pulsed to ground potential, utilizes a transformer-coupled diode-clamped solid state circuit to achieve the 2--35 {mu}s pulse width range required. The second pulser, which pulses from ground to approximately 7 kV, relies on a series vacuum tube circuit. The current designs, as well as recent test results and other circuit topologies considered, will be presented. 6 refs.

  11. Clocking the Rise and Fall of Core-Collapse Supernovae

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Rise and Fall of Core-Collapse Supernovae The Rise and Fall of Core-Collapse Supernovae 2D and 3D Models Shed New Light on What Fuels an Exploding Star July 2, 2015 | Tags:...

  12. advanced falling film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Grade Lathrop, Daniel P. 29 Advanced Virology MCBI 7460 Fall 2013 Tuesdays from 2 to 5 pm Engineering Websites Summary: Advanced Virology MCBI 7460 Fall 2013 Tuesdays from 2 to 5...

  13. ME 119 a Prof. A. Minnich Fall 2011 Syllabus

    E-Print Network [OSTI]

    ME 119 a Prof. A. Minnich Fall 2011 Syllabus ME 119a - Heat Transfer: Conduction and Radiation community and perpetuating the Honor System." #12;ME 119 a Prof. A. Minnich Fall 2011 Syllabus Schedule

  14. CMPE 185 Fall 1999 Syllabus 1 1 Administrative details

    E-Print Network [OSTI]

    Karplus, Kevin

    CMPE 185 Fall 1999 Syllabus 1 Syllabus 1 Administrative details Location and time Kresge 327, MWF 2 Syllabus CMPE 185 Fall 1999 4 Special guest lecturers I may arrange to have some guest lectures

  15. CMPE 185 Fall 2000 Syllabus 1 1 Administrative details

    E-Print Network [OSTI]

    Karplus, Kevin

    CMPE 185 Fall 2000 Syllabus 1 Syllabus 1 Administrative details Location and time Kresge 327, MWF 2, and need to do the grading mostly on Dec 2. Karplus Info 1 #12; 2 Syllabus CMPE 185 Fall 2000 4 Special

  16. Global Studies Course List Fall 2010 (2111) COURSE LIST

    E-Print Network [OSTI]

    Jiang, Huiqiang

    2111-01-01T23:59:59.000Z

    ...........................................................................5 2. Global Economy and Global Governance .................................................9 3 from one of six Global Concentrations (Sustainable Development; Global Economy and Global GovernanceGlobal Studies Course List ­ Fall 2010 (2111) Page 1 COURSE LIST Fall 2010 (2111) Global Studies

  17. arts fall training: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    21 22 23 24 25 Next Page Last Page Topic Index 1 BA: Art History Fall--First Year Environmental Sciences and Ecology Websites Summary: BA: Art History Fall--First Year ART...

  18. Green Lands Blue Water 2014 Fall Conference | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Green Lands Blue Water 2014 Fall Conference Green Lands Blue Water 2014 Fall Conference November 18, 2014 10:00AM CST to November 20, 2014 4:00PM CST Richland Community College...

  19. Highlights of the Fall 2013 Implementation Guidelines for

    E-Print Network [OSTI]

    Su, Xiao

    Highlights of the Fall 2013 Implementation Guidelines for Presidential Directive 2009-05 Maureen not permit financial aid for classes not required for the degree.) #12;THANKYOU!!! Fall 2013 Implementation

  20. HKUST Programming Contest 2006 Fall Page 1 of 7

    E-Print Network [OSTI]

    Wu, Dekai

    Programming Contest 2006 Fall Page 4 of 7 Problem C ­ Marble Arrangement Given the number of marbles of threeHKUST Programming Contest 2006 Fall Page 1 of 7 HKUST Programming Contest 2006 Fall Sponsored Programming Contest 2006 Fall Page 2 of 7 Problem A ­ Infinite Path (0,0) (0,1) (0,2) (0,3) (0,4) (0,5) (1

  1. Observation of Coherent Beam-beam Effects in the LHC

    E-Print Network [OSTI]

    Buffat, X; Giachino, R; Herr, W; Papotti, G; Pieloni, T; Calaga, R; White, S M

    2011-01-01T23:59:59.000Z

    Early collisions in the LHC with a very limited number of bunches with high intensities indicated the presence of coherent beam-beam driven oscillations. Here we discuss the experimental results and compare with the expectations.

  2. Electron beam dynamics for the ISIS bremsstrahlung beam generation system

    E-Print Network [OSTI]

    Block, Robert E. (Robert Edward)

    2011-01-01T23:59:59.000Z

    An electron beam transport system was designed for use in the Bremsstrahlung Beam Generation System of the Integrated Stand-off Inspection System (ISIS). The purpose of this electron transport system was to provide for ...

  3. Heavy Oil Upgrading from Electron Beam (E-Beam) Irradiation 

    E-Print Network [OSTI]

    Yang, Daegil

    2011-02-22T23:59:59.000Z

    hydrocarbons. Second, we studied the energy transfer mechanism of E-Beam upgrading to optimize the process. Third, we conducted a preliminary economic analysis based on energy consumption and compared the economics of E-Beam upgrading with conventional...

  4. FINANCE DEPARTMENT Office Hours Fall 2014

    E-Print Network [OSTI]

    Gallo, Linda C.

    FINANCE DEPARTMENT Office Hours Fall 2014 NAME OFFICE HOURS COURSE # COURSE TITLE DAY TIME ROOM-1515 and by appointment FIN 323.8 FIN 323.9 FIN 323.11 FIN 326.1 Fundamentals of Finance Fundamentals of Finance Fundamentals of Finance Financial Institution Mgt TTH TTH TH TTH 0930-1045 1100-1215 1600-1840 1230-1345 GMCS

  5. 2014 Fall Seminar Series September 19, 2014

    E-Print Network [OSTI]

    2014 Fall Seminar Series September 19, 2014 Gregg 320, 12:00 ­ 1:00 Kathleen D. White, PhD, PE U and associated water resources infrastructure represent a tremendous Federal investment (~$400B over the past 50 years) that supports public safety and local and national economic growth. Hence, we have a compelling

  6. ECONOMIC EMERGENCY PROGRAM International Falls Plant Shutdown

    E-Print Network [OSTI]

    Amin, S. Massoud

    Falls. An additional 35 jobs within the corporate structure will also be affected. As the community The manufacturing industry employs 1,100 of those workers, or approximately 17 percent of all jobs, thus making is classified as a manufacturing business. Of the 1,100 manufacturing jobs in Koochiching County, 900

  7. Dynamics of Clouds Fall Semester 2012

    E-Print Network [OSTI]

    ATS712 Dynamics of Clouds Fall Semester 2012 Meeting Times: T/Th: 9-10:15am Room: ATS 101-2pm Course Description: This class focuses on the general dynamics of cloud systems. Models of fog and other Tools / Skills Cotton, W.R., G.H. Bryan, and S.C. van den Heever, 2010: Storm and Cloud Dynamics

  8. Landscape Ecology + Planning NRE 687 Fall 2013

    E-Print Network [OSTI]

    Awtar, Shorya

    Landscape Ecology + Planning NRE 687 ­ Fall 2013 Course Syllabus NRE 687: Landscape Planning in the field of landscape ecology. Hierarchy theory and methods for working across spatial scales. The social mining, collection, and validation Scientific research and application Digital tools, including Arc

  9. Fall 2012 President's Welcome Back Dear Colleagues,

    E-Print Network [OSTI]

    Engineering, Chemistry, Metallurgical and Materials Engineering, and Physics departments. I'd like to thank of the formation of the College of Engineering and Computational Sciences, and Dean Kevin Moore has experiencedFall 2012 President's Welcome Back Dear Colleagues, The excitement of new and returning students

  10. Syllabus Fall 2011 Instructor: Dr. Ginny Catania

    E-Print Network [OSTI]

    Catania, Ginny

    Glaciology Syllabus Fall 2011 Instructor: Dr. Ginny Catania Office Location: EPS 3.128, gcatania@ig.utexas.edu Office Hours: Tuesdays 1-2pm, or by appointment Class Times/Location: T & Th: 11-12:30pm EPS 1

  11. Fall 2013 BOSTONIA ancient Greece is alive

    E-Print Network [OSTI]

    Spence, Harlan Ernest

    Fall 2013 BOSTONIA ancient Greece is alive and well and living conspicuously, for those who pay. And while the University has a sizable community of scholars who focus on ancient Greece from several Professor is David Roochnik, a CAS professor and chair of philosophy. "Ancient Greece is a living world

  12. Enrollment Analysis Final for Fall 2014

    E-Print Network [OSTI]

    Hutcheon, James M.

    ) November 6, 2014 Project Request: Enrollment Analysis ­ Final for Fall 2014. Requested by: Dr. Brooks Keel, President; Dr. Teresa Thompson, Vice President, Student Affairs and Enrollment Management Project Abstract, progression, and graduation. Methodology: The following items and their sources are included in this report

  13. High Noon Lecture Series 2012 Fall Schedule

    E-Print Network [OSTI]

    signed the Affordable Care Act into law. Some health insurance reforms have already taken place at how important arenas of constitutional law, from health care reform to abortion to affirmative actionHigh Noon Lecture Series 2012 Fall Schedule September 19 "Deciphering the Affordable Care Act" Glen

  14. CALIFORNIA DREAMIN' IGHSPA 2013 FALL CONFERENCE

    E-Print Network [OSTI]

    of the country's population, represents only 2.3 percent of ground source heat pump activity ....." SourceCALIFORNIA DREAMIN' IGHSPA 2013 FALL CONFERENCE Bill Martin built an air-sourced heat pump home's potential to lower greenhouse gases been recognized by regulators? Have electric IOUs financed ground loops

  15. Math 110 Fall 2007 Basic Calculus I

    E-Print Network [OSTI]

    Buckmire, Ron

    will have at some point t years in the future, if we know the rate M (t) at which money increases in the space below: 1 #12;Math 110 Class 31 Fall 2007 Newton's Law of Cooling Newton's Law of Cooling states that the rate of cooling is proportional to the difference between the object's temperature and the ambient

  16. CenterPiece | Fall 2012 15 REBUILDINGTHELOSTARCHIVE

    E-Print Network [OSTI]

    Chisholm, Rex L.

    to be sectioned, and processing them for regular histopathology, high throughput X-ray fluorescence elementalCenterPiece | Fall 2012 15 REBUILDINGTHELOSTARCHIVE From the 1950s until the end of the Cold War and stockpiled food, scientists around the world worked to understand the biological consequences of nuclear

  17. FALL LEADERSHIP CONFERENCE OCTOBER 29, 2004

    E-Print Network [OSTI]

    Rusu, Adrian

    FALL LEADERSHIP CONFERENCE OCTOBER 29, 2004 OVERVIEW This conference is a unique opportunity for your chapter officers and members to learn about HOSA leadership, and the responsibilities for their office. This conference will combine the leadership skills training and officer responsibilities

  18. Fall Rubber Colloquium CHARACTERIZATION OF DISPERSION

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    9th Fall Rubber Colloquium CHARACTERIZATION OF DISPERSION MECHANISMS OF AGGLOMERATED FILLERS (styrene-butadiene rubber). The objective was to determine the role of the intrinsic parameters Carbon black and silica are widely used as reinforcing fillers for rubber compounds in the tire industry

  19. Experimental Foods 709:489 Fall 2012

    E-Print Network [OSTI]

    Chen, Kuang-Yu

    #11 Emulsions & fat replacers F 11/30 Food Colors T 12/4 Flavors & seasonings F 12/7 Genetically modified foods Reserve reading Research paper due 12/7 T 12/11 EXAM #12;Experimental Foods 709:489 Fall 2012 Lecture: Tuesday & Friday 9:30- 10:25 AM 106 HSB Lab sections

  20. FALL 2012 OU/SPC CAREER EXPERIENCE

    E-Print Network [OSTI]

    FALL 2012 OU/SPC CAREER EXPERIENCE PROGRAM The Storm Prediction Center (SPC) and the OU School will spend between 8-10 hrs per week at the SPC working on a research project related to U.S. severe weather through this program. The student will also will have the opportunity to spend several days in the SPC

  1. Chemistry 106X -Fall 2010 General Chemistry

    E-Print Network [OSTI]

    Wagner, Diane

    Chemistry 106X - Fall 2010 General Chemistry Instructor: Christopher Iceman Class: MWF 9 bookstore or elsewhere: · Chemistry and Chemical Reactivity 7th Ed. by Kotz, Treichel, and Townsend-0-495-38703-9 Electronic Book - ISBN 978-0-495-68043-7 · OWL pin number for Chemistry and Chemical Reactivity 7th Ed. (1

  2. CNR GRADUATION SURVEY RESULTS Fall, 2002

    E-Print Network [OSTI]

    (38% are employed or attending grad school) #12;Natural Resource Management (17 completed surveys) 4CNR GRADUATION SURVEY RESULTS Fall, 2002 Received 73 completed surveys out of 79 students or are planning to attend graduate school after graduation $21,710 Average salary of the students who indicated

  3. Inside this issue: New this fall 1

    E-Print Network [OSTI]

    Linsley, Braddock K.

    .albany.edu/gogreen. Interesting in trying vanpooling? Want to car- pool but don't know how to find someone to share the ride of Environmental Sustainability Sustainability Bulletin New this fall Car sharing Rent cars on an hourly basis the week following the program for any group interested in trying it out. The car- pooling service features

  4. Internship -Fall 2011 Search Solutions Digital Media

    E-Print Network [OSTI]

    Cinabro, David

    Internship - Fall 2011 Search Solutions Digital Media SSdigitalmedia.com About us: Search Solutions Search Solutions Digital Media 1500 N. Stephenson HWY Royal Oak, MI 48067 Amanda are a full service digital advertising agency. We build custom web packages to meet our clients' exact needs

  5. Purdue College of Science|Fall 2012

    E-Print Network [OSTI]

    Kihara, Daisuke

    Purdue College of Science|Fall 2012 :: Geosciences in the Cinema :: Field Notes Colombia in Roberts Frederick L. Hovde Dean of Science Joseph S. Francisco Associate Dean for Research and Graduate Biological Sciences Paul B. Shepson Chemistry Sunil Prabhakar Computer Science Jon Harbor Earth, Atmospheric

  6. California Environmental Law & Policy Issues (Fall 2008)

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Law 273.71 California Environmental Law & Policy Issues (Fall 2008) Units: 2 CCN (2Ls/3Ls): 49696 for Environmental Law & Policy and a Lecturer in Residence at Boalt Hall School of Law. He received his law degree of key California environmental law and policy issues. Guest speakers include a distinguished group

  7. fall convocation THE UNIVERSITY OF NEW MEXICO SCHOOL OF ENGINEERING

    E-Print Network [OSTI]

    New Mexico, University of

    fall convocation THE UNIVERSITY OF NEW MEXICO SCHOOL OF ENGINEERING fall convocation #12;Message from the Dean To the Fall 2012 University of New Mexico School of Engineering Graduates I am delighted and honored to welcome you to the University of New Mexico School of Engineering Convocation

  8. 30 BOSTONIA Fall 2014 PHOTOGRAPHS BY MATTIA BALSAMINI Lessons from

    E-Print Network [OSTI]

    Spence, Harlan Ernest

    30 BOSTONIA Fall 2014 PHOTOGRAPHS BY MATTIA BALSAMINI Lessons from #12;Fall 2014 BOSTONIA 31 Venice LASKOWSKI #12;32 BOSTONIA Fall 2014 On a warm June night, tourists sip cocktails on the banks of the Grand into the ground, effectively petrifying and preserving them. They put planks on top of these pillars, and marble

  9. Prof. A. Suciu Name: MTH 1733 QUIZ 4 Fall 1997

    E-Print Network [OSTI]

    Prof. A. Suciu Name: MTH 1733 QUIZ 4 Fall 1997 1. 6 points Solve the following initial value of differential equations: x 0 = 2x + y y 0 = \\Gammax + 4y #12; MTH 1733 Quiz 4 Fall 1997 3. 6 points A tank present? #12; MTH 1733 Quiz 4 Fall 1997 5. 6 points Consider the following autonomous differential

  10. Automatic Fall Detection Based on Doppler Radar Motion Signature

    E-Print Network [OSTI]

    He, Zhihai "Henry"

    than one third of adults 65 and older fall each year in the United States. To address the problem, we above age 65 [2]. The death rate caused by falls among elders is increasing quickly over the past decade classification; SVM; kNN I. INTRODUCTION Falls are the leading causes of accidental death in the US population

  11. Pulsed ion beam source

    DOE Patents [OSTI]

    Greenly, J.B.

    1997-08-12T23:59:59.000Z

    An improved pulsed ion beam source is disclosed having a new biasing circuit for the fast magnetic field. This circuit provides for an initial negative bias for the field created by the fast coils in the ion beam source which pre-ionize the gas in the source, ionize the gas and deliver the gas to the proper position in the accelerating gap between the anode and cathode assemblies in the ion beam source. The initial negative bias improves the interaction between the location of the nulls in the composite magnetic field in the ion beam source and the position of the gas for pre-ionization and ionization into the plasma as well as final positioning of the plasma in the accelerating gap. Improvements to the construction of the flux excluders in the anode assembly are also accomplished by fabricating them as layered structures with a high melting point, low conductivity material on the outsides with a high conductivity material in the center. 12 figs.

  12. Colliding beams of light

    E-Print Network [OSTI]

    B. V. Ivanov

    2002-12-28T23:59:59.000Z

    The stationary gravitational field of two identical counter-moving beams of pure radiation is found in full generality. The solution depends on an arbitrary function and a parameter which sets the scale of the energy density. Some of its properties are studied. Previous particular solutions are derived as subcases.

  13. Ion-beam technologies

    SciTech Connect (OSTI)

    Fenske, G.R. [Argonne National Lab., IL (United States)

    1993-01-01T23:59:59.000Z

    This compilation of figures and diagrams reviews processes for depositing diamond/diamond-like carbon films. Processes addressed are chemical vapor deposition (HFCVD, PACVD, etc.), plasma vapor deposition (plasma sputtering, ion beam sputtering, evaporation, etc.), low-energy ion implantation, and hybrid processes (biased sputtering, IBAD, biased HFCVD, etc.). The tribological performance of coatings produced by different means is discussed.

  14. Seismic and Acoustic Investigations of Rock Fall Initiation, Processes, and Mechanics

    E-Print Network [OSTI]

    Zimmer, Valerie Louise

    2011-01-01T23:59:59.000Z

    Happy  Isles  and  the  1999  Glacier  Point  rock  falls,  there   was   an   attempt   to   monitor   rock   fall   in   Yosemite   Valley  

  15. The Cooling of Particle Beams

    E-Print Network [OSTI]

    Sessler, Andrew M.

    2008-01-01T23:59:59.000Z

    67, 15. Hangst, J "Laser Cooling of a Stored Ion Beam - ATheorem an.d Phase Space Cooling", Proceedings of theWorkshop on Beam Cooling and Related Topics, Montreaux, CERN

  16. Hadron beams session-summary

    SciTech Connect (OSTI)

    Terwilliger, K.M. (University of Michigan, Ann Arbor, MI 48109-1120, USA (US))

    1989-05-05T23:59:59.000Z

    The status of presently operating polarized beams at Fermilab, the AGS, and KEK is discussed. Other schemes such as Siberian Snakes and self-polarization of a beam in situ are briefly analyzed.(AIP)

  17. Laser beam pulse formatting method

    DOE Patents [OSTI]

    Daly, T.P.; Moses, E.I.; Patterson, R.W.; Sawicki, R.H.

    1994-08-09T23:59:59.000Z

    A method for formatting a laser beam pulse using one or more delay loops is disclosed. The delay loops have a partially reflective beam splitter and a plurality of highly reflective mirrors arranged such that the laser beam pulse enters into the delay loop through the beam splitter and circulates therein along a delay loop length defined by the mirrors. As the laser beam pulse circulates within the delay loop a portion thereof is emitted upon each completed circuit when the laser beam pulse strikes the beam splitter. The laser beam pulse is thereby formatted into a plurality of sub-pulses. The delay loops are used in combination to produce complex waveforms by combining the sub-pulses using additive waveform synthesis. 8 figs.

  18. The High Flux Beam Reactor at Brookhaven National Laboratory

    SciTech Connect (OSTI)

    Shapiro, S.M.

    1994-12-31T23:59:59.000Z

    Brookhaven National Laboratory`s High Flux Beam Reactor (HFBR) was built because of the need of the scientist to always want `more`. In the mid-50`s the Brookhaven Graphite reactor was churning away producing a number of new results when the current generation of scientists, led by Donald Hughes, realized the need for a high flux reactor and started down the political, scientific and engineering path that led to the BFBR. The effort was joined by a number of engineers and scientists among them, Chemick, Hastings, Kouts, and Hendrie, who came up with the novel design of the HFBR. The two innovative features that have been incorporated in nearly all other research reactors built since are: (i) an under moderated core arrangement which enables the thermal flux to peak outside the core region where beam tubes can be placed, and (ii) beam tubes that are tangential to the core which decrease the fast neutron background without affecting the thermal beam intensity. Construction began in the fall of 1961 and four years later, at a cost of $12 Million, criticality was achieved on Halloween Night, 1965. Thus began 30 years of scientific accomplishments.

  19. Recent advances of strong-strong beam-beam simulation

    SciTech Connect (OSTI)

    Qiang, Ji; Furman, Miguel A.; Ryne, Robert D.; Fischer, Wolfram; Ohmi,Kazuhito

    2004-09-15T23:59:59.000Z

    In this paper, we report on recent advances in strong-strong beam-beam simulation. Numerical methods used in the calculation of the beam-beam forces are reviewed. A new computational method to solve the Poisson equation on nonuniform grid is presented. This method reduces the computational cost by a half compared with the standard FFT based method on uniform grid. It is also more accurate than the standard method for a colliding beam with low transverse aspect ratio. In applications, we present the study of coherent modes with multi-bunch, multi-collision beam-beam interactions at RHIC. We also present the strong-strong simulation of the luminosity evolution at KEKB with and without finite crossing angle.

  20. Metallic beam development for the Facility for Rare Isotope Beam

    SciTech Connect (OSTI)

    Machicoane, Guillaume, E-mail: machicoa@nscl.msu.edu; Cole, Dallas; Leitner, Daniela; Neben, Derek; Tobos, Larry [Facility for Rare Isotope Beam, Michigan State University, East Lansing, Michigan 48824 (United States)] [Facility for Rare Isotope Beam, Michigan State University, East Lansing, Michigan 48824 (United States)

    2014-02-15T23:59:59.000Z

    The Facility for Rare Isotope Beams (FRIB) at Michigan State University (MSU) will accelerate a primary ion beam to energies beyond 200 MeV/u using a superconducting RF linac and will reach a maximum beam power of 400 kW on the fragmentation target. The beam intensity needed from the ECR ion source is expected to be between 0.4 and 0.5 emA for most medium mass to heavy mass elements. Adding to the challenge of reaching the required intensity, an expanded list of primary beams of interest has been established based on the production rate and the number of isotope beams that could be produced with FRIB. We report here on the development done for some of the beam in the list including mercury (natural), molybdenum ({sup 98}Mo), and selenium ({sup 82}Ser)

  1. Results of long-range beam-beam studies - scaling with beam separation and intensity

    E-Print Network [OSTI]

    Assmann, R; Buffat, X; Calaga, R; Giachino, R; Herr, W; Metral, E; Papotti, G; Pieloni, T; Roy, G; Trad, G; Kaltchev, D; CERN. Geneva. ATS Department

    2012-01-01T23:59:59.000Z

    We studied possible limitations due to the long-range beam-beam effects in the LHC. With a large number of bunches and collisions in all interaction points, we have reduced the crossing angles to enhance long-range beam-beam effects to evaluate their influence on dynamic aperture and losses. Different beta* and intensities have been used in two dedicated experiments and allow the test of the expected scaling laws.

  2. Ion beam generating apparatus

    DOE Patents [OSTI]

    Brown, Ian G. (1088 Woodside Rd., Berkeley, CA 94708); Galvin, James (2 Commodore #276, Emeryville, CA 94608)

    1987-01-01T23:59:59.000Z

    An ion generating apparatus utilizing a vacuum chamber, a cathode and an anode in the chamber. A source of electrical power produces an arc or discharge between the cathode and anode. The arc is sufficient to vaporize a portion of the cathode to form a plasma. The plasma is directed to an extractor which separates the electrons from the plasma, and accelerates the ions to produce an ion beam.

  3. Ion beam generating apparatus

    DOE Patents [OSTI]

    Brown, I.G.; Galvin, J.

    1987-12-22T23:59:59.000Z

    An ion generating apparatus utilizing a vacuum chamber, a cathode and an anode in the chamber. A source of electrical power produces an arc or discharge between the cathode and anode. The arc is sufficient to vaporize a portion of the cathode to form a plasma. The plasma is directed to an extractor which separates the electrons from the plasma, and accelerates the ions to produce an ion beam. 10 figs.

  4. Stationary nonlinear Airy beams

    SciTech Connect (OSTI)

    Lotti, A. [Dipartimento di Fisica e Matematica, Universita del'Insubria, Via Valleggio 11, I-22100 Como (Italy); Centre de Physique Theorique, CNRS, Ecole Polytechnique, F-91128 Palaiseau (France); Faccio, D. [Dipartimento di Fisica e Matematica, Universita del'Insubria, Via Valleggio 11, I-22100 Como (Italy); School of Engineering and Physical Sciences, SUPA, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom); Couairon, A. [Centre de Physique Theorique, CNRS, Ecole Polytechnique, F-91128 Palaiseau (France); Papazoglou, D. G. [Institute of Electronic Structure and Laser (IESL), Foundation for Research and Technology, Hellas (FORTH), P.O. Box 1527, GR-71110 Heraklion (Greece); Materials Science and Technology Department, University of Crete, GR-71003 Heraklion (Greece); Panagiotopoulos, P.; Tzortzakis, S. [Institute of Electronic Structure and Laser (IESL), Foundation for Research and Technology, Hellas (FORTH), P.O. Box 1527, GR-71110 Heraklion (Greece); Abdollahpour, D. [Institute of Electronic Structure and Laser (IESL), Foundation for Research and Technology, Hellas (FORTH), P.O. Box 1527, GR-71110 Heraklion (Greece); Physics Department, University of Crete, GR-71003 Heraklion (Greece)

    2011-08-15T23:59:59.000Z

    We demonstrate the existence of an additional class of stationary accelerating Airy wave forms that exist in the presence of third-order (Kerr) nonlinearity and nonlinear losses. Numerical simulations and experiments, in agreement with the analytical model, highlight how these stationary solutions sustain the nonlinear evolution of Airy beams. The generic nature of the Airy solution allows extension of these results to other settings, and a variety of applications are suggested.

  5. Axion beams at HERA?

    E-Print Network [OSTI]

    K. Piotrzkowski

    2007-01-09T23:59:59.000Z

    If the recently observed anomaly in the PVLAS experiment is due to the axion, then the powerful beams of synchrotron photons, propagating through high magnetic field of the HERA beamline, become strong axion sources. This gives a unique opportunity of detection of the axion-photon interactions by installing a small detector in the HERA tunnel, and to corroborate the axion hypothesis within a few days of running.

  6. CHEMISTRY 3311, Fall 1998 Professor Walba

    E-Print Network [OSTI]

    Walba, David

    Name: -1- CHEMISTRY 3311, Fall 1998 Professor Walba Third Hour Exam November 19, 1998 scores: 1) 2) 3) 4) PLEASE read the questions carefully! This is a closed-book "open model" exam. You may use for scratch. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

  7. CHEM 3311, Fall 2010 Professor Walba

    E-Print Network [OSTI]

    Walba, David

    CHEM 3311, Fall 2010 Professor Walba First Hour Exam September 23, 2010 scores: 1) 2) 3) 4) 5) CU-book exam. The use of notes, calculators, scratch paper, or cell phones will not be allowed during the exam the backs of the pages for scratch. ! H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9

  8. CHEMISTRY 3311, Fall 2000 Professor Walba

    E-Print Network [OSTI]

    Walba, David

    Name: -1- CHEMISTRY 3311, Fall 2000 Professor Walba Third Hour Exam November 16, 2000 scores: 1) 2) 3) 4) PLEASE read the questions carefully! This is a closed-book "open model" exam. You may use for scratch. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

  9. CHEMISTRY 3311, Fall 2000 Professor Walba

    E-Print Network [OSTI]

    Walba, David

    Name: -1- CHEMISTRY 3311, Fall 2000 Professor Walba Second Hour Exam October 26, 2000 scores: 1) 2) 3) 4) PLEASE read the questions carefully! This is a closed-book "open model" exam. You may use for scratch. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

  10. CHEM 3311, Fall 2010 Professor Walba

    E-Print Network [OSTI]

    Walba, David

    CHEM 3311, Fall 2010 Professor Walba Second Hour Exam October 21, 2010 scores: 1) 2) 3) 4) 5) CU-book exam. The use of notes, calculators, scratch paper, or cell phones will not be allowed during the exam the backs of the pages for scratch. ! H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9

  11. Journal of Undergraduate Research, Fall 2009

    E-Print Network [OSTI]

    2009-10-01T23:59:59.000Z

    , electrospray is not a universal ionizer. Some of the ingredients may not have been ionized and therefore would not be detected by the mass spectrometer. Qualitative analysis was performed on each of the samples’ NMR spectra. The body wash samples...The Journal of Undergraduate Research at the University of Kansas Second Edition | Fall 2009 ON THE COVER Jayhawk Boulevard winds between Fraser Hall (left) and Lippincott and Dyche halls on the Lawrence campus. Courtesy University Relations...

  12. Understanding the Poor Resolution from Test Beam RunUnderstanding the Poor Resolution from Test Beam Run 2004 Straw Test beam results2004 Straw Test beam results

    E-Print Network [OSTI]

    1 Understanding the Poor Resolution from Test Beam RunUnderstanding the Poor Resolution from Test Beam Run aah #12;2 2004 Straw Test beam results2004 Straw Test beam results ! Doc # 3308 v#3 by A. Ledovskoy " Using Data from 2004 Test Beam " Used "triplet" method for beam nominally perpendicular to Straw

  13. On falling spheres : the dynamics of water entry and descent along a flexible beam

    E-Print Network [OSTI]

    Aristoff, Jeffrey Michael

    2009-01-01T23:59:59.000Z

    This thesis has two parts. In Part I, we present the results of a combined experimental and theoretical investigation of the vertical impact of spheres on a water surface. Particular attention is given to characterizing ...

  14. Albeni Falls Wildlife Mitigation : Annual Report 2002.

    SciTech Connect (OSTI)

    Terra-Berns, Mary

    2003-01-01T23:59:59.000Z

    The Albeni Falls Interagency Work Group continued to actively engage in implementing wildlife mitigation actions in 2002. Regular Work Group meetings were held to discuss budget concerns affecting the Albeni Falls Wildlife Mitigation Program, to present potential acquisition projects, and to discuss and evaluate other issues affecting the Work Group and Project. Work Group members protected 1,386.29 acres of wildlife habitat in 2002. To date, the Albeni Falls project has protected approximately 5,914.31 acres of wildlife habitat. About 21% of the total wildlife habitat lost has been mitigated. Administrative activities have increased as more properties are purchased and continue to center on restoration, operation and maintenance, and monitoring. In 2001, Work Group members focused on development of a monitoring and evaluation program as well as completion of site-specific management plans. This year the Work Group began implementation of the monitoring and evaluation program performing population and plant surveys, data evaluation and storage, and map development as well as developing management plans. Assuming that the current BPA budget restrictions will be lifted in the near future, the Work Group expects to increase mitigation properties this coming year with several potential projects.

  15. Falling through the black hole horizon

    E-Print Network [OSTI]

    Brustein, Ram

    2015-01-01T23:59:59.000Z

    We consider the fate of a small classical object, a "stick", as it falls through the horizon of a large black hole (BH). Classically, the equivalence principle dictates that the stick is affected by small tidal forces, and Hawking's quantum-mechanical model of BH evaporation makes essentially the same prediction. If, on the other hand, the BH horizon is surrounded by a "firewall", the stick will be consumed as it falls through. We have recently extended Hawking's model by taking into account the quantum fluctuations of the geometry and the classical back-reaction of the emitted particles. Here, we calculate the strain exerted on the falling stick for our model. The strain depends on the near-horizon state of the Hawking pairs. We find that, after the Page time when the state of the pairs deviates significantly from maximal entanglement (as required by unitarity), the induced strain in our semiclassical model is still parametrically small. This is because the number of the disentangled pairs is parametrically ...

  16. Plasma-beam traps and radiofrequency quadrupole beam coolers

    SciTech Connect (OSTI)

    Maggiore, M., E-mail: mario.maggiore@lnl.infn.it; Cavenago, M.; Comunian, M.; Chirulotto, F.; Galatà, A.; De Lazzari, M.; Porcellato, A. M.; Roncolato, C.; Stark, S. [INFN-LNL, viale dell’Università 2, 35020 Legnaro (Italy)] [INFN-LNL, viale dell’Università 2, 35020 Legnaro (Italy); Caruso, A.; Longhitano, A. [INFN-LNS, via S. Sofia 54, 95123 Catania (Italy)] [INFN-LNS, via S. Sofia 54, 95123 Catania (Italy); Cavaliere, F.; Maero, G.; Paroli, B.; Pozzoli, R.; Romé, M. [INFN Sezione di Milano and Dipartimento di Fisica, Università degli Studi di Milano, via Celoria 16, 20133 Milano (Italy)] [INFN Sezione di Milano and Dipartimento di Fisica, Università degli Studi di Milano, via Celoria 16, 20133 Milano (Italy)

    2014-02-15T23:59:59.000Z

    Two linear trap devices for particle beam manipulation (including emittance reduction, cooling, control of instabilities, dust dynamics, and non-neutral plasmas) are here presented, namely, a radiofrequency quadrupole (RFQ) beam cooler and a compact Penning trap with a dust injector. Both beam dynamics studies by means of dedicated codes including the interaction of the ions with a buffer gas (up to 3 Pa pressure), and the electromagnetic design of the RFQ beam cooler are reported. The compact multipurpose Penning trap is aimed to the study of multispecies charged particle samples, primarily electron beams interacting with a background gas and/or a micrometric dust contaminant. Using a 0.9 T solenoid and an electrode stack where both static and RF electric fields can be applied, both beam transport and confinement operations will be available. The design of the apparatus is presented.

  17. Observations of beam-beam effects at the LHC

    E-Print Network [OSTI]

    Papotti, G; Herr, W; Giachino, R; Pieloni, T

    2014-01-01T23:59:59.000Z

    This paper introduces a list of observations related to the beam-beam interaction that were collected over the first years of LHC proton physics operation (2010-12). Beam-beam related effects not only have been extensively observed and recorded, but have also shaped the operation of the LHC for high-intensity proton running in a number of ways: the construction of the filling scheme, the choice of luminosity levelling techniques, measures to mitigate instabilities, and the choice of settings for improving performance (e.g. to reduce losses), among others.

  18. Precision Absolute Beam Current Measurement of Low Power Electron Beam

    SciTech Connect (OSTI)

    Ali, M. M.; Bevins, M. E.; Degtiarenko, P.; Freyberger, A.; Krafft, G. A.

    2012-11-01T23:59:59.000Z

    Precise measurements of low power CW electron beam current for the Jefferson Lab Nuclear Physics program have been performed using a Tungsten calorimeter. This paper describes the rationale for the choice of the calorimeter technique, as well as the design and calibration of the device. The calorimeter is in use presently to provide a 1% absolute current measurement of CW electron beam with 50 to 500 nA of average beam current and 1-3 GeV beam energy. Results from these recent measurements will also be presented.

  19. Neutral Beam Excitation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy:Nanowire Solar541,9337, 2011 at3, Issue 30 NewNetworks,Beam

  20. Beam characterization by wavefront sensor

    DOE Patents [OSTI]

    Neal, D.R.; Alford, W.J.; Gruetzner, J.K.

    1999-08-10T23:59:59.000Z

    An apparatus and method are disclosed for characterizing an energy beam (such as a laser) with a two-dimensional wavefront sensor, such as a Shack-Hartmann lenslet array. The sensor measures wavefront slope and irradiance of the beam at a single point on the beam and calculates a space-beamwidth product. A detector array such as a charge coupled device camera is preferably employed. 21 figs.

  1. Beam emittance measurements at Fermilab

    SciTech Connect (OSTI)

    Wendt, Manfred; Eddy, Nathan; Hu, Martin; Scarpine, Victor; Syphers, Mike; Tassotto, Gianni; Thurman-Keup, Randy; Yang, Ming-Jen; Zagel, James; /Fermilab

    2008-01-01T23:59:59.000Z

    We give short overview of various beam emittance measurement methods, currently applied at different machine locations for the Run II collider physics program at Fermilab. All these methods are based on beam profile measurements, and we give some examples of the related instrumentation techniques. At the end we introduce a multi-megawatt proton source project, currently under investigation at Fermilab, with respect to the beam instrumentation challenges.

  2. Low energy beta-beams

    E-Print Network [OSTI]

    Cristina Volpe

    2009-11-13T23:59:59.000Z

    The main goal of a beta-beam facility is to determine the possible existence of CP violation in the lepton sector, the value of the third neutrino mixing angle and the mass hierarchy. Here we argue that a much broader physics case can be covered since the beta-beam concept can also be used to establish a low energy beta-beam facility. We discuss that the availability of neutrino beams in the 100 MeV energy range offers a unique opportunity to perform neutrino scattering experiments of interest for nuclear physics, for the study of fundamental interactions and of core-collapse supernova physics.

  3. First LHC Beams in ATLAS

    E-Print Network [OSTI]

    Krieger, P

    2009-01-01T23:59:59.000Z

    This is a talk on the ATLAS single beam running, to be given on February 9th at the Aspen Winter Conference.

  4. ANL Beams and Applications Seminar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    characterization of the laser and electron beams of the Cornell Energy Recovery Linac Heng Li Cornell University June 18 Interbeam Scattering Studies at CesrTA Michael Ehrlichman...

  5. Broad-band beam buncher

    DOE Patents [OSTI]

    Goldberg, David A. (Walnut Creek, CA); Flood, William S. (Berkeley, CA); Arthur, Allan A. (Martinez, CA); Voelker, Ferdinand (Orinda, CA)

    1986-01-01T23:59:59.000Z

    A broad-band beam buncher is disclosed, comprising an evacuated housing, an electron gun therein for producing an electron beam, a buncher cavity having entrance and exit openings through which the beam is directed, grids across such openings, a source providing a positive DC voltage between the cavity and the electron gun, a drift tube through which the electron beam travels in passing through such cavity, grids across the ends of such drift tube, gaps being provided between the drift tube grids and the entrance and exit grids, a modulator for supplying an ultrahigh frequency modulating signal to the drift tube for producing velocity modulation of the electrons in the beam, a drift space in the housing through which the velocity modulated electron beam travels and in which the beam is bunched, and a discharge opening from such drift tube and having a grid across such opening through which the bunched electron beam is discharged into an accelerator or the like. The buncher cavity and the drift tube may be arranged to constitute an extension of a coaxial transmission line which is employed to deliver the modulating signal from a signal source. The extended transmission line may be terminated in its characteristic impedance to afford a broad-band response and the device as a whole designed to effect broad-band beam coupling, so as to minimize variations of the output across the response band.

  6. Fall 2001 Vol. 2, No. 4 ii Colorado Climate

    E-Print Network [OSTI]

    Colorado Climate Fall 2001 Vol. 2, No. 4 #12;ii Colorado Climate Table of Contents On Being a Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 July 2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 August 2001

  7. Idaho Falls Power- Commercial Energy Conservation Loan Program

    Broader source: Energy.gov [DOE]

    Idaho Falls Power is offering a zero interest loan program to qualifying commercial customers to install efficient lighting and other energy conservation measures. The building must receive its...

  8. Idaho Falls Power- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Idaho Falls Power offers rebates to eligible customers on energy efficient HVAC measures and weatherization upgrades. Rebates are available on heat pumps, new manufactured homes and insulation....

  9. Idaho Falls Power- Commercial Energy Conservation Rebate Program

    Broader source: Energy.gov [DOE]

    In addition to loan programs, Idaho Falls Power offers rebates for customers meeting certain criteria. An energy audit will inspect the following measures and recommend upgrades as needed:...

  10. River Falls Municipal Utilities- Business Energy Efficiency Rebate Program (Wisconsin)

    Broader source: Energy.gov [DOE]

    River Falls Municipal Utility (RFMU) offers a variety of rebates to business customers for implementing energy efficient equipment upgrades. Rebates are available for commercial lighting, central...

  11. Math 13800 Mathematics for Elementary Education II Fall 2014 ...

    E-Print Network [OSTI]

    Math Dept.

    2014-08-19T23:59:59.000Z

    Mathematics for Elementary Education II. Fall 2014. Coordinator: Renee Figueroa (formerly Renee Roames) MATH 808 ph: 494-1929 email: rroames@

  12. Math 13700 Mathematics for Elementary Education I Fall 2014

    E-Print Network [OSTI]

    User

    2014-08-21T23:59:59.000Z

    Mathematics for Elementary Education I. Fall 2014. Coordinator: Renee Figueroa (formerly Renee Roames) MATH 808 ph: 494-1929 email: rroames@purdue.

  13. albeni falls wildlife: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JAMES A. MARTIN, Department of Wildlife, Fisheries 5 Wildlife Landscape Ecology -Syllabus FS599 Fall Term 2010 Geosciences Websites Summary: 1 Wildlife Landscape Ecology -...

  14. #tipsEnergy: Weatherizing Your Home for Fall

    Broader source: Energy.gov [DOE]

    With the start of colder weather, we are sharing fall energy-saving tips that will help you save money and stay comfortable.

  15. River Falls Municipal Utilities- Energy Star Appliance Rebates

    Broader source: Energy.gov [DOE]

    River Falls Municipal Utility (RFMU), in conjuction with the Wisconsin Focus on Energy program, offers a variety of rebates to residential electric customers for upgrading to energy efficient...

  16. Cathode fall measurement in a dielectric barrier discharge in helium

    SciTech Connect (OSTI)

    Hao, Yanpeng; Zheng, Bin; Liu, Yaoge [School of Electric Power, South China University of Technology, Guangzhou 510640 (China)] [School of Electric Power, South China University of Technology, Guangzhou 510640 (China)

    2013-11-15T23:59:59.000Z

    A method based on the “zero-length voltage” extrapolation is proposed to measure cathode fall in a dielectric barrier discharge. Starting, stable, and discharge-maintaining voltages were measured to obtain the extrapolation zero-length voltage. Under our experimental conditions, the “zero-length voltage” gave a cathode fall of about 185 V. Based on the known thickness of the cathode fall region, the spatial distribution of the electric field strength in dielectric barrier discharge in atmospheric helium is determined. The strong cathode fall with a maximum field value of approximately 9.25 kV/cm was typical for the glow mode of the discharge.

  17. ,"International Falls, MN Natural Gas Pipeline Imports From Canada...

    U.S. Energy Information Administration (EIA) Indexed Site

    International Falls, MN Natural Gas Pipeline Imports From Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of...

  18. ,"Niagara Falls, NY Natural Gas Pipeline Imports From Canada...

    U.S. Energy Information Administration (EIA) Indexed Site

    Imports From Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Niagara Falls,...

  19. Safety and Occupational Health Specialist (Fall Protection Specialist)

    Broader source: Energy.gov [DOE]

    The incumbent in this position serves as a Fall Protection Specialist in the Safety Office. Safety is responsible for administering BPA's safety program and providing advice, counsel, direction,...

  20. Seating Final Exam, Fall 2011, Bailey classes, Lambert Fieldhouse

    E-Print Network [OSTI]

    Bailey, Charlotte M

    2011-12-07T23:59:59.000Z

    Seating Final Exam, Fall 2011, KLOSTER classes, Lambert. Fieldhouse. NAME. ROW. SEAT NUMBER. Arrington, Brook L. 1. 1. Blevins, Sash M. 2. 1. Brown ...

  1. Cedar Falls Utilities- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    The Cedar Falls Utilities (CFU) Energy Efficiency Rebate Program provides rebates for energy efficient heating and cooling equipment, thermal envelope improvements and appliance recycling. The...

  2. Accident Investigation of the September 20, 2012 Fatal Fall from...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 20, 2012 Fatal Fall from the Dworshak-Taft 1 Transmission Tower, at the Bonneville Power Marketing Administration Accident Investigation of the September 20, 2012 Fatal...

  3. Accident Investigation of the June 1, 2013, Stairway Fall Resulting...

    Energy Savers [EERE]

    Accident Investigation of the June 1, 2013, Stairway Fall Resulting in a Federal Employee Fatality at DOE Headquarters Germantown, Maryland Accident Investigation of the June 1,...

  4. The NRS Transect 4:1 (fall 1985)

    E-Print Network [OSTI]

    UC Natural Reserve System

    1985-01-01T23:59:59.000Z

    Transect, Fall Publications Carpinteria Salt Marsh: Wayne R.natural history of the Carpinteria Salt Marsh, complete withencompasses the 120-acre Carpinteria Salt Marsh Reserve, a

  5. Hawking radiation on a falling lattice

    E-Print Network [OSTI]

    Ted Jacobson; David Mattingly

    2000-01-12T23:59:59.000Z

    Scalar field theory on a lattice falling freely into a 1+1 dimensional black hole is studied using both WKB and numerical approaches. The outgoing modes are shown to arise from incoming modes by a process analogous to a Bloch oscillation, with an admixture of negative frequency modes corresponding to the Hawking radiation. Numerical calculations show that the Hawking effect is reproduced to within 0.5% on a lattice whose proper spacing where the wavepacket turns around at the horizon is $\\sim0.08$ in units where the surface gravity is 1.

  6. Bioenergy Deployment Consortium (BDC) 2014 Fall Symposium

    Broader source: Energy.gov [DOE]

    The 2014 BDC Fall Symposium will be held on October 21–22, 2014 in Fort Myers, Florida. The event will include a tour of the Algenol facility on Wednesday morning. The symposium will have panels for progress reports from current cellulosic bio-product companies, updates on government policy from several agencies, scale-up strategies,and lessons learned. POET-DSM will provide the after dinner success story. Neil Rossmeissl, Program Manager, Algal Program, Bioenergy Technologies Office, will be delivering the keynote address on expanding the bioeconomy.

  7. ARM - Field Campaign - Fall 1997 Cloud IOP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032)8LigovCampaignsCLEX-5govCampaignsFall 1997 Cloud IOP ARM Data

  8. ARM - Field Campaign - Fall 1997 SCM IOP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032)8LigovCampaignsCLEX-5govCampaignsFall 1997 Cloud IOP ARM

  9. ARM - Field Campaign - Fall 1997 Shortwave IOP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032)8LigovCampaignsCLEX-5govCampaignsFall 1997 Cloud IOP ARMShortwave IOP

  10. ARM - Field Campaign - Fall 1997 UAV IOP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032)8LigovCampaignsCLEX-5govCampaignsFall 1997 Cloud IOP ARMShortwave

  11. Klamath Falls Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home KizildereKlamath Falls

  12. Granite Falls Energy | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG Contracting JumpGove County,Texas: EnergyOhio:Geothermal ProjectFalls

  13. DOE - Office of Legacy Management -- Falls

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTable ofArizonaBuffalo -Elk River Reactor -Texas Falls City,

  14. Twin Falls District | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri Global Energy LLC Place: Dallas, Texas2022Wind Farm JumpTwin Falls

  15. MIT Fall Career Fair | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9November 6, In this3,OfficeWITHMISR-DerivedFall

  16. NEUTRAL-BEAM INJECTION

    SciTech Connect (OSTI)

    Kunkel, W.B.

    1980-06-01T23:59:59.000Z

    The emphasis in the preceding chapters has been on magnetic confinement of high temperature plasmas. The question of production and heating of such plasmas has been dealt with relatively more briefly. It should not be inferred, however, that these matters must therefore be either trivial or unimportant. A review of the history reveals that in the early days all these aspects of the controlled fusion problem were considered to be on a par, and were tackled simultaneously and with equal vigor. Only the confinement problem turned out to be much more complex than initially anticipated, and richer in challenge to the plasma physicist than the questions of plasma production and heating. On the other hand, the properties of high-temperature plasmas and plasma confinement can only be studied experimentally after the problems of production and of heating to adequate temperatures are solved. It is the purpose of this and the next chapter to supplement the preceding discussions with more detail on two important subjects: neutral-beam injection and radio-frequency heating. These are the major contenders for heating in present and future tokamak and mirror fusion experiments, and even in several proposed reactors. For neutral beams we emphasize here the technology involved, which has undergone a rather remarkable development. The physics of particle and energy deposition in the plasma, and the discussion of the resulting effects on the confined plasma, have been included in previous chapters, and some experimental results are quoted there. Other heating processes of relevance to fusion are mentioned elsewhere in this book, in connection with the experiments where they are used: i.e. ohmic heating, adiabatic compression heating, and alpha-particle heating in Chapter 3 by H.P. Furth; more ohmic heating in Chapter 7, and shock-implosion heating, laser heating, and relativistic-electron beam heating in Chapter 8, both by W. E. Quinn. These methods are relatively straightforward in their physics and their technology, or in any case they are considered to be adequately covered by these other authors.

  17. Laser acceleration of ion beams

    E-Print Network [OSTI]

    I. A. Egorova; A. V. Filatov; A. V. Prozorkevich; S. A. Smolyansky; D. B. Blaschke; M. Chubaryan

    2007-02-01T23:59:59.000Z

    We consider methods of charged particle acceleration by means of high-intensity lasers. As an application we discuss a laser booster for heavy ion beams provided, e.g. by the Dubna nuclotron. Simple estimates show that a cascade of crossed laser beams would be necessary to provide additional acceleration to gold ions of the order of GeV/nucleon.

  18. Head-on beam-beam collisions with high intensities and long range beam-beam studies in the LHC

    E-Print Network [OSTI]

    Albert, M; Assmann, R; Buffat, X; Calaga, R; Cornelis, K; Fitterer, M; Giachino, R; Herr, W; Miyamoto, R; Norman, L; Papotti, G; Pieloni, T; Ponce, L; Redaelli, S; Schaumann, M; Trad, G; Wollmann, D

    2011-01-01T23:59:59.000Z

    In two experiments we studied possible limitations due to the beam-beam effects in the LHC. In the first experiment we collided high intensity bunches head-on to explore the region for high luminosity collisions. In the second test we reduced the crossing angle in the presence of long range encounters to increase their effects.

  19. Toward automated beam optics control

    SciTech Connect (OSTI)

    Silbar, R.R.; Schultz, D.E.

    1987-01-01T23:59:59.000Z

    We have begun a program aiming toward automatic control of charged-particle beam optics using artificial intelligence programming techniques. In developing our prototype, we are working with LISP machines and the KEE expert system shell. Our first goal was to develop a ''mouseable'' representation of a typical beam line. This responds actively to changes entered from the mouse or keyboard, giving an updated display of the beam line itself, its optical properties, and the instrumentation and control devices as seen by the operater. We have incorporated TRANSPORT, written in Fortran but running as a callable procedure in the LISP environment, for simulation of the beam-line optics. This paper describes the experience gained in meeting our first goal and discusses plans to extend the work so that it is usable, in realtime, on an operating beam line. 11 refs.

  20. Fall 2013 1,660 1,222 29,466 32,348 Fall 2012 1,781 1,107 29,707 32,595

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Year Potomac State WVU- Tech WVU- Main All WVU Fall 2013 1,660 1,222 29,466 32,348 Fall 2012 1,781 1,107 29,707 32,595 Fall 2011 1,800 1,316 29,617 32,733 Fall 2010 1,836 1,209 29,306 32,351 Fall 2009 1,810 1,244 28,898 31,952 Fall 2008 1,582 1,224 28,840 31,646 Fall 2007 1,608 1,450 28,113 31

  1. Delivering High IntensityDelivering High Intensity Proton Beam:Proton Beam

    E-Print Network [OSTI]

    McDonald, Kirk

    11 Delivering High IntensityDelivering High Intensity Proton Beam:Proton Beam: Lessons for the NextFACT08NuFACT08 ­­ 4 July4 July S. ChildressS. Childress ­­ Proton BeamsProton Beams 22 Presentation OutlinePresentation Outline Key Proton Beam ConsiderationsKey Proton Beam Considerations The First

  2. ENV 6105 Page 1 of 6 Fall 2011 Air Pollution

    E-Print Network [OSTI]

    Stuart, Amy L.

    ENV 6105 Page 1 of 6 Fall 2011 Syllabus Air Pollution ENV 6105.901 (ref# 90504) Fall 2011 Course Description: A study of air pollution. Emphasis is given to principles underlying our understanding of ambient air pollution, its sources, its effects, and mechanisms for its management. Credit Hours and Work

  3. MMWCMathers Museum of World Cultures Fall 2013 No. 2

    E-Print Network [OSTI]

    Indiana University

    MMWCMathers Museum of World Cultures Fall 2013 No. 2 Fall programs and events announced pg. 3 pg. 5 pg. 8 MMWC selected as China/US partner IQ-Wall used for research, teaching Student, Museum travel at the Mathers Museum of World Cultures. I could just dive in and start de- scribing some of my favorite programs

  4. Page 1 of 1 GG 301 Mineralogy Fall 2009

    E-Print Network [OSTI]

    Hammer, Julia Eve

    Page 1 of 1 GG 301 Mineralogy Fall 2009 Course Description and Syllabus Welcome to Mineralogy on mineral composition, the fourth presents optical mineralogy, the fifth introduces us to major rock some of the analytical tools of modern mineralogy. Course Information Credits: 4 Semester: Fall 2009

  5. PHS 650, Fall 2011 1 PREVENTION OF OVERWEIGHT AND OBESITY

    E-Print Network [OSTI]

    Sheridan, Jennifer

    PHS 650, Fall 2011 1 PHS 650 PREVENTION OF OVERWEIGHT AND OBESITY Course Syllabus Fall 2011 Credits knowledge to develop, implement, and evaluate obesity prevention interventions. This course will emphasize pediatric obesity prevention with a focus on nutrition and physical activity health behaviors

  6. Chemistry B.S. Fall--First Year

    E-Print Network [OSTI]

    Gering, Jon C.

    Chemistry B.S. Fall--First Year · CHEM 130 Chemical Principles I* · CHEM 145 Freshman Seminar · CHEM 222 Intro to Quant Analysis · CHEM 245 Sophomore Seminar · CHEM 329 Organic Chemistry I · MATH 264 Calculus III · LSP coursework Fall--Third Year · CHEM 345 Junior Seminar · CHEM 323/324 Physical Chemistry

  7. (BSET) -FIRE SAFETY ENGINEERING TECHNOLOGY CURRICULUM Effective Fall 2003

    E-Print Network [OSTI]

    Raja, Anita

    (BSET) - FIRE SAFETY ENGINEERING TECHNOLOGY CURRICULUM Effective Fall 2003 Updated - Fall 2009csd: In addition to University and College of Engineering requirements, an AAS transfer student who is admitted Advisor: Notes Engineering Economics Building Fire Safety Risk Mgmt. for Emerg. Services Professional

  8. Laser beam alignment apparatus and method

    DOE Patents [OSTI]

    Gruhn, Charles R. (Martinez, CA); Hammond, Robert B. (Los Alamos, NM)

    1981-01-01T23:59:59.000Z

    The disclosure relates to an apparatus and method for laser beam alignment. Thermoelectric properties of a disc in a laser beam path are used to provide an indication of beam alignment and/or automatic laser alignment.

  9. Electrostatic wire stabilizing a charged particle beam

    DOE Patents [OSTI]

    Prono, D.S.; Caporaso, G.J.; Briggs, R.J.

    1983-03-21T23:59:59.000Z

    In combination with a charged particle beam generator and accelerator, apparatus and method are provided for stabilizing a beam of electrically charged particles. A guiding means, disposed within the particle beam, has an electric charge induced upon it by the charged particle beam. Because the sign of the electric charge on the guiding means and the sign of the particle beam are opposite, the particles are attracted toward and cluster around the guiding means to thereby stabilize the particle beam as it travels.

  10. BRYANT FALL 2010 ABRYANT FALL 2010 A A BRYANT UNIVERSITY R E S OURCE FOR P ROFESSIONAL SUCCESS

    E-Print Network [OSTI]

    Blais, Brian

    BRYANT FALL 2010 ABRYANT FALL 2010 A A BRYANT UNIVERSITY R E S OURCE FOR P ROFESSIONAL SUCCESS E X AT HOME IN THE WORLD Bryant is educating students to be intrepid explorers in a world of unlimited global's fastest-growing programs. 14 DOING BUSINESS IN THE GLOBAL ARENA Bryant alumni distinguish themselves

  11. Summary of the engineering assessment of inactive uranium mill tailings: Falls City site, Falls City, Texas

    SciTech Connect (OSTI)

    none,

    1981-10-01T23:59:59.000Z

    Ford, Bacon and Davis Utah Inc. has reevaluated the Falls City site in order to update the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranum mill tailings at Falls City, Texas. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrolgy and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 2.5 million tons of tailings at the Falls City site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material, to removal of the tailings to remote disposal sites and decontamination of the tailings site. Cost estimates for the four options range from about $21,700,000 for stabilization in place, to about $35,100,000 for disposal at a distance of about 15 mi. Three principal alternatives for the reprocessing of the Falls City tailings were examined: heap leaching; treatment at an existing mill; reprocessing at a new conventional mill constructed for tailings reprocessing. The tailings piles are presently being rewashed for uranium recovery by Solution Engineering, Inc. The cost for further reprocessing would be about $250/lb of U/sub 3/O/sub 8/. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery does not appear to be economically attractive for the foreseeable future.

  12. Dr. Campbell's Bio111 Exam #1 Fall 2001 Fall 2001 Biology 111 Exam #1 -Cellular Communications

    E-Print Network [OSTI]

    Campbell, A. Malcolm

    this exam take you to complete (excluding typing)? #12;Dr. Campbell's Bio111 Exam #1 ­ Fall 2001 2 Lab/v IDH if your stock solutions are 28.8 mM NADP+ , 500 mM isocistrate and 100 mM IDH (to be considered 100% IDH stock solution). 10 mL NADP stock + 20 mL isocitrate + 14 mL IDH + water to a final volume

  13. MEASUREMENT OF BEAM CHARACTERISTICS FOR PHOTO- ELECTRON BEAM...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    electron beam is expected to be used in a wide field, such as X-ray generation by inverse Compton scattering, pulse radiolysis, etc. The laser driven photo cathode rf gun system is...

  14. Electron beam machining using rotating and shaped beam power distribution

    DOE Patents [OSTI]

    Elmer, J.W.; O`Brien, D.W.

    1996-07-09T23:59:59.000Z

    An apparatus and method are disclosed for electron beam (EB) machining (drilling, cutting and welding) that uses conventional EB guns, power supplies, and welding machine technology without the need for fast bias pulsing technology. The invention involves a magnetic lensing (EB optics) system and electronic controls to: (1) concurrently bend, focus, shape, scan, and rotate the beam to protect the EB gun and to create a desired effective power-density distribution, and (2) rotate or scan this shaped beam in a controlled way. The shaped beam power-density distribution can be measured using a tomographic imaging system. For example, the EB apparatus of this invention has the ability to drill holes in metal having a diameter up to 1,000 {micro}m (1 mm or larger), compared to the 250 {micro}m diameter of laser drilling. 5 figs.

  15. Electron beam machining using rotating and shaped beam power distribution

    DOE Patents [OSTI]

    Elmer, John W. (Pleasanton, CA); O'Brien, Dennis W. (Livermore, CA)

    1996-01-01T23:59:59.000Z

    An apparatus and method for electron beam (EB) machining (drilling, cutting and welding) that uses conventional EB guns, power supplies, and welding machine technology without the need for fast bias pulsing technology. The invention involves a magnetic lensing (EB optics) system and electronic controls to: 1) concurrently bend, focus, shape, scan, and rotate the beam to protect the EB gun and to create a desired effective power-density distribution, and 2) rotate or scan this shaped beam in a controlled way. The shaped beam power-density distribution can be measured using a tomographic imaging system. For example, the EB apparatus of this invention has the ability to drill holes in metal having a diameter up to 1000 .mu.m (1 mm or larger), compared to the 250 .mu.m diameter of laser drilling.

  16. Alight a beam and beaming light: A theme with variations

    SciTech Connect (OSTI)

    Chattopadhyay, S. [Ernest Orlando Lawrence Berkeley National Laboratory, University of California, Berkeley, California94720 (United States)] [Ernest Orlando Lawrence Berkeley National Laboratory, University of California, Berkeley, California94720 (United States)

    1998-05-01T23:59:59.000Z

    The interaction of light (coherent and incoherent) with charged particle beams is explored in various configurations: incoherent scattering of coherent light (laser) from an incoherent particle beam (high temperature), coherent scattering of coherent light (laser) from a {open_quotes}cold{close_quotes} (bunched) beam, femtosecond generation of particle and light beams via {open_quotes}optical slicing{close_quotes} and Thomson/Compton scattering techniques, etc. The domains of ultrashort temporal duration (femtoseconds) as well as ultrashort wavelengths (x rays and shorter), with varying degrees of coherence, are explored. The relevance to a few critical areas of research in the natural sciences, e.g., ultrafast material, chemical and biological processes, protein folding, particle phase space cooling, etc. are touched upon. All the processes discussed involve proper interpretation and understanding of coherent states of matter and radiation, as well as the quality and quantity of information and energy embedded in them. {copyright} {ital 1998 American Institute of Physics.}

  17. Thermal stresses in laminated beams

    E-Print Network [OSTI]

    Marcano, Victor Manuel

    1983-01-01T23:59:59.000Z

    Stresses Acting on a Section of the Laminated Beam -------- 15 5. Loading Geometry and Material Characteristics of the Test Problem 21 6. Simply-Supported Beam with a Sinusoidal Load--------- 30 7. Shear Stress Distribution for a Simply- Supported... 24. Normal Stress Distribution for a Cantilever Laminated Beam, T-Z sinzx/L --------------- 58 m. i 25. Axial Stress Distribution for a Cantilever Laminated Bearq, T-T (2z/8+1) 2 mi 27. Normal Stress Distribution for ("/L) ? ---- 6O 2 a...

  18. Thermal stresses in laminated beams 

    E-Print Network [OSTI]

    Marcano, Victor Manuel

    1983-01-01T23:59:59.000Z

    Stresses Acting on a Section of the Laminated Beam -------- 15 5. Loading Geometry and Material Characteristics of the Test Problem 21 6. Simply-Supported Beam with a Sinusoidal Load--------- 30 7. Shear Stress Distribution for a Simply- Supported... 24. Normal Stress Distribution for a Cantilever Laminated Beam, T-Z sinzx/L --------------- 58 m. i 25. Axial Stress Distribution for a Cantilever Laminated Bearq, T-T (2z/8+1) 2 mi 27. Normal Stress Distribution for ("/L) ? ---- 6O 2 a...

  19. Circular, confined distribution for charged particle beams

    DOE Patents [OSTI]

    Garnett, R.W.; Dobelbower, M.C.

    1995-11-21T23:59:59.000Z

    A charged particle beam line is formed with magnetic optics that manipulate the charged particle beam to form the beam having a generally rectangular configuration to a circular beam cross-section having a uniform particle distribution at a predetermined location. First magnetic optics form a charged particle beam to a generally uniform particle distribution over a square planar area at a known first location. Second magnetic optics receive the charged particle beam with the generally square configuration and affect the charged particle beam to output the charged particle beam with a phase-space distribution effective to fold corner portions of the beam toward the core region of the beam. The beam forms a circular configuration having a generally uniform spatial particle distribution over a target area at a predetermined second location. 26 figs.

  20. Circular, confined distribution for charged particle beams

    DOE Patents [OSTI]

    Garnett, Robert W. (Los Alamos, NM); Dobelbower, M. Christian (Toledo, OH)

    1995-01-01T23:59:59.000Z

    A charged particle beam line is formed with magnetic optics that manipulate the charged particle beam to form the beam having a generally rectangular configuration to a circular beam cross-section having a uniform particle distribution at a predetermined location. First magnetic optics form a charged particle beam to a generally uniform particle distribution over a square planar area at a known first location. Second magnetic optics receive the charged particle beam with the generally square configuration and affect the charged particle beam to output the charged particle beam with a phase-space distribution effective to fold corner portions of the beam toward the core region of the beam. The beam forms a circular configuration having a generally uniform spatial particle distribution over a target area at a predetermined second location.

  1. Confined energy distribution for charged particle beams

    DOE Patents [OSTI]

    Jason, Andrew J. (Los Alamos, NM); Blind, Barbara (Los Alamos, NM)

    1990-01-01T23:59:59.000Z

    A charged particle beam is formed to a relatively larger area beam which is well-contained and has a beam area which relatively uniformly deposits energy over a beam target. Linear optics receive an accelerator beam and output a first beam with a first waist defined by a relatively small size in a first dimension normal to a second dimension. Nonlinear optics, such as an octupole magnet, are located about the first waist and output a second beam having a phase-space distribution which folds the beam edges along the second dimension toward the beam core to develop a well-contained beam and a relatively uniform particle intensity across the beam core. The beam may then be expanded along the second dimension to form the uniform ribbon beam at a selected distance from the nonlinear optics. Alternately, the beam may be passed through a second set of nonlinear optics to fold the beam edges in the first dimension. The beam may then be uniformly expanded along the first and second dimensions to form a well-contained, two-dimensional beam for illuminating a two-dimensional target with a relatively uniform energy deposition.

  2. STOCHASTIC COOLING FOR BUNCHED BEAMS.

    SciTech Connect (OSTI)

    BLASKIEWICZ, M.

    2005-05-16T23:59:59.000Z

    Problems associated with bunched beam stochastic cooling are reviewed. A longitudinal stochastic cooling system for RHIC is under construction and has been partially commissioned. The state of the system and future plans are discussed.

  3. Stability diagram of colliding beams

    E-Print Network [OSTI]

    Buffat, X; Mounet, N; Pieloni, T

    2014-01-01T23:59:59.000Z

    The effect of the beam-beam interactions on the stability of impedance mode is discussed. The detuning is evaluated by the means of single particle tracking in arbitrarily complex collision configurations, including lattice non-linearities, and used to numerically evaluate the dispersion integral. This approach also allows the effect of non-Gaussian distributions to be considered. Distributions modified by the action of external noise are discussed.

  4. Single lens laser beam shaper

    DOE Patents [OSTI]

    Liu, Chuyu (Newport News, VA); Zhang, Shukui (Yorktown, VA)

    2011-10-04T23:59:59.000Z

    A single lens bullet-shaped laser beam shaper capable of redistributing an arbitrary beam profile into any desired output profile comprising a unitary lens comprising: a convex front input surface defining a focal point and a flat output portion at the focal point; and b) a cylindrical core portion having a flat input surface coincident with the flat output portion of the first input portion at the focal point and a convex rear output surface remote from the convex front input surface.

  5. Electron beam diagnostic for profiling high power beams

    DOE Patents [OSTI]

    Elmer, John W. (Danville, CA); Palmer, Todd A. (Livermore, CA); Teruya, Alan T. (Livermore, CA)

    2008-03-25T23:59:59.000Z

    A system for characterizing high power electron beams at power levels of 10 kW and above is described. This system is comprised of a slit disk assembly having a multitude of radial slits, a conducting disk with the same number of radial slits located below the slit disk assembly, a Faraday cup assembly located below the conducting disk, and a start-stop target located proximate the slit disk assembly. In order to keep the system from over-heating during use, a heat sink is placed in close proximity to the components discussed above, and an active cooling system, using water, for example, can be integrated into the heat sink. During use, the high power beam is initially directed onto a start-stop target and after reaching its full power is translated around the slit disk assembly, wherein the beam enters the radial slits and the conducting disk radial slits and is detected at the Faraday cup assembly. A trigger probe assembly can also be integrated into the system in order to aid in the determination of the proper orientation of the beam during reconstruction. After passing over each of the slits, the beam is then rapidly translated back to the start-stop target to minimize the amount of time that the high power beam comes in contact with the slit disk assembly. The data obtained by the system is then transferred into a computer system, where a computer tomography algorithm is used to reconstruct the power density distribution of the beam.

  6. KTeV beam systems design report

    SciTech Connect (OSTI)

    Bocean, V.; Childress, S.; Coleman, R. [and others

    1997-09-01T23:59:59.000Z

    The primary and secondary beams for the KTeV experiments E799-II and E832 are discussed. The specifications are presented and justified. The technical details of the implementation of the primary beam transport and stability are detailed. The target, beam dump, and radiation safety issues are discussed. The details of the collimation system for the pair of secondary beams are presented.

  7. Beam Induced Ferrite Heating of the LHC Injection Kickers and Proposals for Improved Cooling

    E-Print Network [OSTI]

    Barnes, M J; Calatroni, S; Day, H; Ducimetière, L; Garlaschè, M; Gomes Namora, V; Mertens, V; Sobiech, Z; Taborelli, M; Uythoven, J; Weterings, W

    2013-01-01T23:59:59.000Z

    The two LHC injection kicker systems produce an integrated field strength of 1.3 T·m with a flattop duration variable up to 7860 ns, and rise and fall times of less than 900 ns and 3000 ns, respectively. A beam screen is placed in the aperture of each magnet, which consists of a ceramic tube with conductors in the inner wall. The conductors provide a path for the beam image current and screen the ferrite yoke against wakefields. Recent LHC operation, with high intensity beam stable for many hours, resulted in significant heating of both the ferrite yoke and beam impedance reduction ferrites. For one kicker magnet the ferrite yoke approached its Curie temperature. As a result of a long thermal time-constant the ferrite yoke can require several hours to cool sufficiently to allow re-injection of beam, thus limiting the running efficiency of the LHC. Thermal measurement data has been analysed, a thermal model developed and emissivity measurements carried out. Various measures to improve the ferrite cooling have...

  8. Head-on beam-beam tune shifts with high brightness beams in the LHC

    E-Print Network [OSTI]

    Alemany, R; Calaga, R; Cornelis, K; Fitterer, M; Giachino, R; Herr, W; McPherson, A; Miyamoto, R; Papotti, G; Pieloni, T; Redaelli, S; Roncarolo, F; Schaumann, M; Suykerbuyk, R; Trad, G; Paret, S

    2011-01-01T23:59:59.000Z

    In this experiment (fills 1765, 1766) we have collided bunches with highest brightness, i.e. small emittances and high intensities, to explore the achievable beam-beam tune shift for head-on collisions. Different parameters and filling schemes have been used for this experiment and tune shifts above 0.015 have been achieved in single collisions and above 0.030 for two collision points.

  9. eRHIC ring-ring design with head-on beam-beam compensation

    SciTech Connect (OSTI)

    Montag,C.; Blaskiewicz, M.; Pozdeyev, E.; Fischer, W.; MacKay, W. W.

    2009-05-04T23:59:59.000Z

    The luminosity of the eRHIC ring-ring design is limited by the beam-beam effect exerted on the electron beam. Recent simulation studies have shown that the beam-beam limit can be increased by means of an electron lens that compensates the beam-beam effect experienced by the electron beam. This scheme requires proper design of the electron ring, providing the correct betatron phase advance between interaction point and electron lens. We review the performance of the eRHIC ring-ring version and discuss various parameter sets, based on different cooling schemes for the proton/ion beam.

  10. Nufact 2008 The Beta Beam WP Beta beam R&D status

    E-Print Network [OSTI]

    McDonald, Kirk

    Nufact 2008 The Beta Beam WP Nufact 08 1 Beta beam R&D status Elena Wildner, CERN on behalf of the Beta Beam Study Group EURISOL/Euronu #12;Nufact 2008 The Beta Beam WP Nufact08Nufact08 Outline Recall, EURISOL Ion Production Loss Management Improvements New Program, EuroNu 2 #12;Nufact 2008 The Beta Beam WP

  11. Math 514: Applied Mathematics I Course Information and Syllabus Fall 2011

    E-Print Network [OSTI]

    Math 514: Applied Mathematics I Course Information and Syllabus ­ Fall 2011 Instructor: Prof. Jon M

  12. Term: Fall 2012 Spring 2013 University of Pittsburgh

    E-Print Network [OSTI]

    Sibille, Etienne

    Term: Fall 2012 ­ Spring 2013 1 University of Pittsburgh HOUSING/DINING SERVICES CONTRACT This Housing/Dining Services Contract (this "Contract") is made by and between the University of Pittsburgh

  13. Term: Fall 2011 Spring 2012 University of Pittsburgh

    E-Print Network [OSTI]

    Sibille, Etienne

    Term: Fall 2011 ­ Spring 2012 1 University of Pittsburgh HOUSING/DINING SERVICES CONTRACT This Housing/Dining Services Contract (this "Contract") is made by and between the University of Pittsburgh

  14. 2013 Fall Commencement Receptions College/School Time Location

    E-Print Network [OSTI]

    Pittendrigh, Barry

    2013 Fall Commencement Receptions College/School Time Location Agriculture 12/15 after ceremony@purdue.edu Nuclear 12/15 11:30-1:00 Nuclear Engineering Bldg, Rm 115 For more info Chrystal Randler (765

  15. FORESTRY, BSF IPC: 2/8/2011 EFFECTIVE: Fall 2011

    E-Print Network [OSTI]

    Selmic, Sandra

    FORESTRY, BSF IPC: 2/8/2011 EFFECTIVE: Fall 2011 SCHOOL OF FORESTRY GENERAL EDUCATION REQUIREMENTS: PROFESSIONAL CORE: GRADE SCH GRADE SCH ARTS: FORESTRY: ART 290/HPE 280/MUGN 290/SPTH 3 FOR 111 Intro to Forest

  16. The rise/fall/connection model of intonation. 

    E-Print Network [OSTI]

    Taylor, Paul A

    1995-01-01T23:59:59.000Z

    This paper describes a new model of intonation for English. The paper proposes that intonation can be described using a sequence of rise, fall and connection elements. Pitch accents and boundary rises are described ...

  17. 6.450 Principles of Digital Communication - I, Fall 2002

    E-Print Network [OSTI]

    Gallager, Robert G.

    6.450 was offered in Fall 2002 as a relatively new elective on digital communication. The course serves as an introduction to the theory and practice behind many of today's communications systems. 6.450 forms the first of ...

  18. Idaho Falls Power- Residential Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    Idaho Falls Power's Energy Efficiency Loan Program offers zero interest loans for qualifying customers to purchase and install efficient electric appliances. The program will loan up to 100% of the...

  19. EAS/CEE 6795 Atmospheric Aerosols Fall 2011

    E-Print Network [OSTI]

    Weber, Rodney

    EAS/CEE 6795 Atmospheric Aerosols Fall 2011 Mon Wed Fri ­ 11 concepts of aerosol physics with applications to atmospheric aerosols. Text Book: Hinds, Aerosol Technology: Properties, behavior and measurement of airborne particles

  20. Fall 2013-Office of the Registrar Student Banner Marshals

    E-Print Network [OSTI]

    Dyer, Bill

    Fall 2013- Office of the Registrar Student Banner Marshals Morning of Commencement- Preparation with the banner and then reseat the students. There will be a second marshal to count students to make sure all

  1. Paper # XXX Topic: Reaction Kinetics Eastern State Fall Technical Meeting

    E-Print Network [OSTI]

    Knyazev, Vadim D.

    Paper # XXX Topic: Reaction Kinetics 1 Eastern State Fall Technical Meeting Chemical & Physical ­ 1017 s-1 #12;Paper # XXX Topic: Reaction Kinetics 2 and activation energy values close to the C-C bond

  2. AGRICULTURAL & BIOLOGICAL ENGINEERING FALL 2013 INSIDE THIS ISSUE

    E-Print Network [OSTI]

    Gilbert, Matthew

    AGRICULTURAL & BIOLOGICAL ENGINEERING FALL 2013 INSIDE THIS ISSUE: · ABESpring of Agricultural and Biological Engineering of the College of Agricultural, Consumer and Environmental Sciences and the College of Engineering at the University of Illinois at Urbana Champaign. 338 Agricultural Engineering

  3. EIS-0106: Great Falls-Conrad Transmission Line Project, Montana

    Broader source: Energy.gov [DOE]

    The Western Area Power Administration prepared this EIS to evaluate the environmental impacts of the construction and operation of a 230-kilovolt transmission line from Great Falls, Montana, to Conrad, Montana.

  4. Physics 122 Fundamentals of Physics II Syllabus for Fall 2012

    E-Print Network [OSTI]

    Lathrop, Daniel P.

    Physics 122 ­ Fundamentals of Physics II Syllabus for Fall 2012 Course description The second)-405-4993 Office hours : TBD Website http://elms.umd.edu The syllabus and schedule can be also found at: http

  5. Physics 171. General Relativity. Professor Michael Dine Fall, 2009. Syllabus

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Physics 171. General Relativity. Professor Michael Dine Fall, 2009. Syllabus Contact Information the material in class and in the text. I expect to revise this syllabus continually through the course

  6. Syllabus for MA 16100 IMPACT, Fall 2014 Description: Many ...

    E-Print Network [OSTI]

    2014-08-25T23:59:59.000Z

    Syllabus for MA 16100 IMPACT, Fall 2014. Description: Many students find that large lectures are not the best way for them to learn. IMPACT is a university-wide

  7. Jefferson Lab Announces Two Fall Science Series Events | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    first Fall 2004 Science Series event. The presentation will begin at 7 p.m. in the CEBAF Center auditorium on Monday, Oct. 4. Larsen's presentation, "Moon Runes, The Light of...

  8. Idaho Falls Power- Energy Efficient Heat Pump Loan Program

    Broader source: Energy.gov [DOE]

    Idaho Falls Power offers zero interest loans to all eligible customers for the purchase and installation of energy efficient heat pumps. The Heat Pump Program applies to heating or cooling in...

  9. MATH 371 COMBINATORICS: FALL 2013 SYLLABUS Instructor: Andrew Thompson

    E-Print Network [OSTI]

    Thompson, Andrew

    MATH 371 COMBINATORICS: FALL 2013 SYLLABUS Instructor: Andrew Thompson Where: LSRC A156 When: Tu www.math.duke.edu/~thompson/teaching and the MATH 371 Sakai site. OFFICE HOURS. These will be held

  10. Jefferson Lab announces two Fall Science Series lectures; examine...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the topics of Jefferson Lab's Fall Science Series. The first presentation, "When Stars Attack" is Oct. 17 and features Dr. Brian Fields from the University of Illinois. He will...

  11. Jefferson Lab announces Oct. 7 Fall Science Series event | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of North America in the 15th century, is housed in the Beinecke Rare Book and Manuscript Library at Yale University. Jefferson Lab announces Oct. 7 Fall Science Series event...

  12. River Falls Municipal Utilities- Renewable Energy Finance Program

    Broader source: Energy.gov [DOE]

    River Falls Municipal Utilities (RFMU) offers loans of $2,500 - $50,000 to its residential customers for the installation of photovoltaic (PV), solar thermal, geothermal, wind electric systems. The...

  13. ECE/CS 584: Fall 2012 Embedded System Verification

    E-Print Network [OSTI]

    Liberzon, Daniel

    powerful software tools (model checkers, SMT solvers, & theorem provers) for designing & analyzing systems · Real-time and hybrid system models, stability verification: Multiple Lyapunov functions, slow switchingECE/CS 584: Fall 2012 Embedded System Verification URL: http

  14. ,"Niagara Falls, NY Natural Gas Pipeline Exports to Canada (MMcf...

    U.S. Energy Information Administration (EIA) Indexed Site

    Exports to Canada (MMcf)" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Niagara Falls, NY...

  15. 9.00W Introduction to Psychology, Fall 2002

    E-Print Network [OSTI]

    Wolfe, Jeremy M.

    This course surveys questions about human behavior and mental life ranging from how you see to why you fall in love. The great controversies: nature and nurture, free will, consciousness, human differences, self and society. ...

  16. ED1 Exam 2 Problems Fall 2012 Section 16.

    E-Print Network [OSTI]

    Peale, Robert E.

    ED1 Exam 2 Problems Fall 2012 Section 16. 1. Find the scalar and vector potentials of a point charge density is (in SI units) A(r) = (µ0 a/3) ( x r) for r

  17. BIOS 3010: ECOLOGY Fall 2013 Dr Stephen Malcolm

    E-Print Network [OSTI]

    Malcolm, Stephen

    BIOS 3010: ECOLOGY ­ Fall 2013 Dr Stephen Malcolm BONUS POINT OPPORTUNITY 1: For up to 5 bonus: For credit, this bonus opportunity (title and summary paragraph) is due by September 16. #12;

  18. TA Position Available Fall Quarter 2014 Immediate Opening

    E-Print Network [OSTI]

    Bogyo, Matthew

    in the development of course and workshop content and materials · Assist with the identification, invitationTA Position Available ­ Fall Quarter 2014 Immediate Opening Career Transitions with facilitation of panel/group discussions · Prepare and distribute marketing materials to departments

  19. 4 BOSTONIA Fall 2011 COMMONWEALTH NEWS FROM BU AND BEYOND

    E-Print Network [OSTI]

    Spence, Harlan Ernest

    for those with severe motion impairments to Corey Petitt of Boston. CYDNEYSCOTT #12;Fall 2011 BOSTONIA 5 Two the 2011 Science Day Graduate School of Arts & Sciences Dean's Award and is already free online

  20. Prof. A. Suciu Name: ____________________* MTH 1733 QUIZ 4 Fall 1997

    E-Print Network [OSTI]

    QUIZ 4 Fall 1997 _________ 1. |||6_points||_Solve the following________________________________Quiz_4________________________________F* *all_1997_____ _________ 3. |||6_points||_A tank________________________________Quiz_4________________________________F* *all_1997_____ _________ 5. |||6_points

  1. Math 566 Topics in Combinatorics Fall 2009 Instructor Amites Sarkar

    E-Print Network [OSTI]

    Sarkar, Amites

    Math 566 Topics in Combinatorics Fall 2009 Instructor Amites Sarkar Text Combinatorics B´ela Bollob and Fridays, in 216 Bond Hall. My phone number is 650 7569 and my e-mail is amites.sarkar@wwu.edu #12;

  2. Math 331 Ordinary Differential Equations Fall 2014 Instructor Amites Sarkar

    E-Print Network [OSTI]

    Sarkar, Amites

    Math 331 Ordinary Differential Equations Fall 2014 Instructor Amites Sarkar Text Differential Bond Hall. My phone number is 650 7569 and my e-mail is amites.sarkar@wwu.edu Relation to Overall

  3. Math 564 Graph Theory Fall 2008 Instructor Amites Sarkar

    E-Print Network [OSTI]

    Sarkar, Amites

    Math 564 Graph Theory Fall 2008 Instructor Amites Sarkar Text Pearls in Graph Theory (Dover Edition and Fridays, in 216 Bond Hall. My phone number is 650 7569 and my e-mail is amites.sarkar@wwu.edu #12;

  4. Math 564 Graph Theory Fall 2013 Instructor Amites Sarkar

    E-Print Network [OSTI]

    Sarkar, Amites

    Math 564 Graph Theory Fall 2013 Instructor Amites Sarkar Text Modern Graph Theory B´ela Bollob, Tuesdays, Wednesdays and Fridays, in 216 Bond Hall. My phone number is 650 7569 and my e-mail is amites.sarkar

  5. Nonlocal description of a falling body through the air

    E-Print Network [OSTI]

    Kwok Sau Fa

    2008-10-02T23:59:59.000Z

    In this present work we consider a falling body through the air under the influence of gravity. In particular, we consider the experimental data based upon the free fall of six men in the atmosphere of the earth. In order to describe this process we employ a nonlocal dissipative force. We show that our description, by using an exponential memory kernel, can fit the experimental data as well as that of a local dissipative force.

  6. Generate Uniform Transverse Distributed Electron Beam along a Beam Line

    E-Print Network [OSTI]

    Jiao, Y

    2015-01-01T23:59:59.000Z

    It has been reported that transverse distribution shaping can help to further enhance the energy extraction efficiency in a terawatt, tapered X-ray free-electron laser. Thus, methods of creating and keeping almost uniform transverse distributed (UTD) beam within undulators are required. This study shows that a UTD electron beam can be generated within evenly distributed drift sections where undulators can be placed, by means of octupoles and particular optics. A concrete design is presented, and numerical simulations are done to verify the proposed method.

  7. Physics Opportunities with Meson Beams

    E-Print Network [OSTI]

    Briscoe, William J; Haberzettl, Helmut; Manley, D Mark; Naruki, Megumi; Strakovsky, Igor I; Swanson, Eric S

    2015-01-01T23:59:59.000Z

    Over the past two decades, meson photo- and electro-production data of unprecedented quality and quantity have been measured at electromagnetic facilities worldwide. By contrast, the meson-beam data for the same hadronic final states are mostly outdated and largely of poor quality, or even nonexistent, and thus provide inadequate input to help interpret, analyze, and exploit the full potential of the new electromagnetic data. To reap the full benefit of the high-precision electromagnetic data, new high-statistics data from measurements with meson beams, with good angle and energy coverage for a wide range of reactions, are critically needed to advance our knowledge in baryon and meson spectroscopy and other related areas of hadron physics. To address this situation, a state of-the-art meson-beam facility needs to be constructed. The present paper summarizes unresolved issues in hadron physics and outlines the vast opportunities and advances that only become possible with such a facility.

  8. Divergence of optical vortex beams

    E-Print Network [OSTI]

    Reddy, Salla Gangi; Prabhakar, Shashi; Anwar, Ali; Banerji, J; Singh, R P

    2015-01-01T23:59:59.000Z

    We show, both theoretically and experimentally, that the propagation of optical vortices in free space can be analysed by using the width ($w(z)$) of the host Gaussian beam and the inner and outer radii of the vortex beam at the source plane ($z=0$) as defined in \\textit{Optics Letters \\textbf{39,} 4364-4367 (2014)}. We also studied the divergence of vortex beams, considered as the rate of change of inner or outer radius with the propagation distance, and found that it varies with the order in the same way as that of the inner and outer radii at zero propagation distance. These results may be useful in designing optical fibers for orbital angular momentum modes that play a crucial role in quantum communication.

  9. Shimmed electron beam welding process

    DOE Patents [OSTI]

    Feng, Ganjiang (Clifton Park, NY); Nowak, Daniel Anthony (Alplaus, NY); Murphy, John Thomas (Niskayuna, NY)

    2002-01-01T23:59:59.000Z

    A modified electron beam welding process effects welding of joints between superalloy materials by inserting a weldable shim in the joint and heating the superalloy materials with an electron beam. The process insures a full penetration of joints with a consistent percentage of filler material and thereby improves fatigue life of the joint by three to four times as compared with the prior art. The process also allows variable shim thickness and joint fit-up gaps to provide increased flexibility for manufacturing when joining complex airfoil structures and the like.

  10. Finding beam focus errors automatically

    SciTech Connect (OSTI)

    Lee, M.J.; Clearwater, S.H.; Kleban, S.D.

    1987-01-01T23:59:59.000Z

    An automated method for finding beam focus errors using an optimization program called COMFORT-PLUS. The steps involved in finding the correction factors using COMFORT-PLUS has been used to find the beam focus errors for two damping rings at the SLAC Linear Collider. The program is to be used as an off-line program to analyze actual measured data for any SLC system. A limitation on the application of this procedure is found to be that it depends on the magnitude of the machine errors. Another is that the program is not totally automated since the user must decide a priori where to look for errors. (LEW)

  11. Electron-beam scull melting with electromagnetic stirring of melt in crucible

    SciTech Connect (OSTI)

    Ladokhin, S.V. [Institute for Casting Problems, Kiev (Ukraine)

    1994-12-31T23:59:59.000Z

    The technologies and equipment have been developed for electron-beam scull melting with electromagnetic stirring of melt for some Ni-based superalloys as well as for multi-component Ti-, Zr-, Nb-, and Mo-based alloys. Two types of scull crucible sets with electromagnetic stirring systems have been constructed, with the metal pouring by the crucible tilting or through the hole in the crucible bottom. In the second case slag does not fall into a mold, and the electron beam may be used for metal heating in the costing head, thus improving the quality of castings. The technologies developed allow to utilize scrap, cost part reverts, chips etc. thus saving virgin alloys. The electromagnetic stirring application permits to product multi-component alloys, to increase the mass of the metal poured, and to reduce the specific energy expenditure and metal loss through evaporation.

  12. Transverse beam shape measurements of intense proton beams using optical transition radiation

    SciTech Connect (OSTI)

    Scarpine, Victor E.; /Fermilab

    2012-03-01T23:59:59.000Z

    A number of particle physics experiments are being proposed as part of the Department of Energy HEP Intensity Frontier. Many of these experiments will utilize megawatt level proton beams onto targets to form secondary beams of muons, kaons and neutrinos. These experiments require transverse size measurements of the incident proton beam onto target for each beam spill. Because of the high power levels, most beam intercepting profiling techniques will not work at full beam intensity. The possibility of utilizing optical transition radiation (OTR) for high intensity proton beam profiling is discussed. In addition, previous measurements of OTR beam profiles from the NuMI beamline are presented.

  13. Thermographic calorimetry of the neutral beam injectors heating beams at TJ-II

    SciTech Connect (OSTI)

    Fuentes, C.; Liniers, M.; Guasp, J.; Doncel, J.; Botija, J.; Wolfers, G.; Alonso, J.; Acedo, M.; Sanchez, E.; Marcon, G.; Weber, M.; Carrasco, R.; Sarasola, X.; Zurro, B.; Tera, J. [Laboratorio Nacional de Fusion/Asociacion EURATOM-CIEMAT, Avenida Complutense 22, 28040 Madrid (Spain)

    2006-10-15T23:59:59.000Z

    A new beam diagnostic based on infrared thermography has been developed for the neutral beam injectors of the stellarator TJ-II. A highly anisotropic movable target intercepts the beam at its entrance into the stellarator. The thermal print of the beam is captured with a high resolution infrared camera. The infrared images of the target can be translated, with the appropriate analysis, into power density patterns of the beam. The system is calibrated in situ with two thermocouples adiabatically mounted in the target. The two-dimensional beam power density distribution can be accurately characterized allowing beam optimization with respect to the different parameters involved in the beam formation and transport.

  14. High energy laser beam dump

    DOE Patents [OSTI]

    Halpin, John (Tracy, CA)

    2004-09-14T23:59:59.000Z

    The laser beam dump is positioned in a housing. An absorbing glass plate means is operatively connected to the housing. A heat sync means for extracting heat from the absorbing glass plate means is operatively connected to the housing and operatively connected to the absorbing glass plate means.

  15. Relativistic atomic beam spectroscopy II

    SciTech Connect (OSTI)

    NONE

    1991-12-31T23:59:59.000Z

    We are requesting support for a postdoctoral person to participate in H{sup -} studies at Los Alamos. In addition, we are requesting funding for a state-of-the-art YAG laser system that would allow us to obtain data at three times our present rate with improved beam quality.

  16. Bunch length effects in the beam-beam compensation with an electron lens

    SciTech Connect (OSTI)

    Fischer, W.; Luo, Y.; Montag, C.

    2010-02-25T23:59:59.000Z

    Electron lenses for the head-on beam-beam compensation are under construction at the Relativistic Heavy Ion Collider. The bunch length is of the same order as the {beta}-function at the interaction point, and a proton passing through another proton bunch experiences a substantial phase shift which modifies the beam-beam interaction. We review the effect of the bunch length in the single pass beam-beam interaction, apply the same analysis to a proton passing through a long electron lens, and study the single pass beam-beam compensation with long bunches. We also discuss the beam-beam compensation of the electron beam in an electron-ion collider ring.

  17. antinucleon beams: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    interaction of fields induced by the beam with their environment. Beam current transformers as well as beam position monitors are based on this principle. The signals induced...

  18. automatic beam alignment: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    interaction of fields induced by the beam with their environment. Beam current transformers as well as beam position monitors are based on this principle. The signals induced...

  19. accidental beam loss: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    interaction of fields induced by the beam with their environment. Beam current transformers as well as beam position monitors are based on this principle. The signals induced...

  20. antiparticle beams: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    interaction of fields induced by the beam with their environment. Beam current transformers as well as beam position monitors are based on this principle. The signals induced...

  1. accelerating beam stability: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    particle beams (beam intercepting devices BIDs). For the design of BIDs, the increasing heat load onto these devices due to energetic and focused beams and - in most cases -...

  2. accelerated oxygen-14 beam: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    particle beams (beam intercepting devices BIDs). For the design of BIDs, the increasing heat load onto these devices due to energetic and focused beams and - in most cases -...

  3. accelerator school beam: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    particle beams (beam intercepting devices BIDs). For the design of BIDs, the increasing heat load onto these devices due to energetic and focused beams and - in most cases -...

  4. Transport of elliptic intense charged -particle beams

    E-Print Network [OSTI]

    Zhou, J. (Jing), 1978-

    2006-01-01T23:59:59.000Z

    The transport theory of high-intensity elliptic charged-particle beams is presented. In particular, the halo formation and beam loss problem associated with the high space charge and small-aperture structure is addressed, ...

  5. Neutral particle beam sensing and steering

    DOE Patents [OSTI]

    Maier, II, William B. (Los Alamos, NM); Cobb, Donald D. (Los Alamos, NM); Robiscoe, Richard T. (Los Alamos, NM)

    1991-01-01T23:59:59.000Z

    The direction of a neutral particle beam (NPB) is determined by detecting Ly.alpha. radiation emitted during motional quenching of excited H(2S) atoms in the beam during movement of the atoms through a magnetic field. At least one detector is placed adjacent the beam exit to define an optical axis that intercepts the beam at a viewing angle to include a volume generating a selected number of photons for detection. The detection system includes a lens having an area that is small relative to the NPB area and a pixel array located in the focal plane of the lens. The lens viewing angle and area pixel array are selected to optimize the beam tilt sensitivity. In one embodiment, two detectors are placed coplanar with the beam axis to generate a difference signal that is insensitive to beam variations other than beam tilt.

  6. On Gaussian Beams Described by Jacobi's Equation

    E-Print Network [OSTI]

    Smith, Steven T.

    Gaussian beams describe the amplitude and phase of rays and are widely used to model acoustic propagation. This paper describes four new results in the theory of Gaussian beams. (1) A new version of the ?ervený equations ...

  7. Autogenerator of beams of charged particles

    DOE Patents [OSTI]

    Adler, R.J.; Mazarakis, M.G.; Miller, R.M.; Shope, S.L.; Smith, D.L.

    1983-10-31T23:59:59.000Z

    An autogenerating apparatus provides secondary intense relativistic current beam pulses in response to an injected beam pulse. One or more electromagnetic energy storage devices are provided in conjunction with gaps along a beam propagation path for the injected beam pulse. For injected beam pulses which are no longer than double the transit time of electromagnetic waves within the storage devices (which may be resonant cavities), distinct secondary beam pulses are generated by each of the energy storage devices. The beam propagation path, together with the one or more gaps provided therein, operates as a pulse forming transmission line cavity, in which the separate cavities associated with the gaps provide delays for electromagnetic waves generated at the gaps. After doubly traversing the cavity, the electromagnetic waves cause the gap to generate the secondary beam pulses, which are thus delayed by a time interval equal to the double transit time for the induced wave within the cavity.

  8. Autogenerator of beams of charged particles

    DOE Patents [OSTI]

    Adler, Richard J. (Albuquerque, NM); Mazarakis, Michael G. (Albuquerque, NM); Miller, Robert B. (Albuquerque, NM); Shope, Steven L. (Albuquerque, NM); Smith, David L. (Albuquerque, NM)

    1986-01-01T23:59:59.000Z

    An autogenerating apparatus provides secondary intense relativistic current beam pulses in response to an injected beam pulse. One or more electromagnetic energy storage devices are provided in conjunction with gaps along a beam propagation path for the injected beam pulse. For injected beam pulses which are no longer than double the transit time of electromagnetic waves within the storage devices (which may be resonant cavities), distinct secondary beam pulses are generated by each of the energy storage devices. The beam propagation path, together with the one or more gaps provided therein, operates as a pulse forming transmission line cavity, in which the separate cavities associated with the gaps provide delays for electromagnetic waves generated at the gaps. After doubly traversing the cavity, the electromagnetic waves cause the gap to generate the secondary beam pulses, which are thus delayed by a time interval equal to the double transit time for the induced wave within the cavity.

  9. Beams of fast neutral atoms and molecules in low-pressure gas-discharge plasma

    SciTech Connect (OSTI)

    Metel, A. S., E-mail: ametel@stankin.ru [Moscow State University of Technology 'Stankin,' (Russian Federation)

    2012-03-15T23:59:59.000Z

    Fast neutral atom and molecule beams have been studied, the beams being produced in a vacuum chamber at nitrogen, argon, or helium pressure of 0.1-10 Pa due to charge-exchange collisions of ions accelerated in the sheath between the glow discharge plasma and a negative grid immersed therein. From a flat grid, two broad beams of molecules with continuous distribution of their energy from zero up to e(U + U{sub c}) (where U is voltage between the grid and the vacuum chamber and U{sub c} is cathode fall of the discharge) are propagating in opposite directions. The beam propagating from the concave surface of a 0.2-m-diameter grid is focused within a 10-mm-diameter spot on the target surface. When a 0.2-m-diameter 0.2-m-high cylindrical grid covered by end disks and composed of parallel 1.5-mm-diameter knitting needles spaced by 4.5 mm is immersed in the plasma, the accelerated ions pass through the gaps between the needles, turn inside the grid into fast atoms or molecules, and escape from the grid through the gaps on its opposite side. The Doppler shift of spectral lines allows for measuring the fast atom energy, which corresponds to the potential difference between the plasma inside the chamber and the plasma produced as a result of charge-exchange collisions inside the cylindrical grid.

  10. Maskless, resistless ion beam lithography

    SciTech Connect (OSTI)

    Ji, Qing

    2003-03-10T23:59:59.000Z

    As the dimensions of semiconductor devices are scaled down, in order to achieve higher levels of integration, optical lithography will no longer be sufficient for the needs of the semiconductor industry. Alternative next-generation lithography (NGL) approaches, such as extreme ultra-violet (EUV), X-ray, electron-beam, and ion projection lithography face some challenging issues with complicated mask technology and low throughput. Among the four major alternative NGL approaches, ion beam lithography is the only one that can provide both maskless and resistless patterning. As such, it can potentially make nano-fabrication much simpler. This thesis investigates a focused ion beam system for maskless, resistless patterning that can be made practical for high-volume production. In order to achieve maskless, resistless patterning, the ion source must be able to produce a variety of ion species. The compact FIB system being developed uses a multicusp plasma ion source, which can generate ion beams of various elements, such as O{sub 2}{sup +}, BF{sub 2}{sup +}, P{sup +} etc., for surface modification and doping applications. With optimized source condition, around 85% of BF{sub 2}{sup +}, over 90% of O{sub 2}{sup +} and P{sup +} have been achieved. The brightness of the multicusp-plasma ion source is a key issue for its application to maskless ion beam lithography. It can be substantially improved by optimizing the source configuration and extractor geometry. Measured brightness of 2 keV He{sup +} beam is as high as 440 A/cm{sup 2} {center_dot} Sr, which represents a 30x improvement over prior work. Direct patterning of Si thin film using a focused O{sub 2}{sup +} ion beam has been investigated. A thin surface oxide film can be selectively formed using 3 keV O{sub 2}{sup +} ions with the dose of 10{sup 15} cm{sup -2}. The oxide can then serve as a hard mask for patterning of the Si film. The process flow and the experimental results for directly patterned poly-Si features are presented. The formation of shallow pn-junctions in bulk silicon wafers by scanning focused P{sup +} beam implantation at 5 keV is also presented. With implantation dose of around 10{sup 16} cm{sup -2}, the electron concentration is about 2.5 x 10{sup 18} cm{sup -3} and electron mobility is around 200 cm{sup 2}/V{center_dot}s. To demonstrate the suitability of scanning FIB lithography for the manufacture of integrated circuit devices, SOI MOSFET fabrication using the maskless, resistless ion beam lithography is demonstrated. An array of microcolumns can be built by stacking multi-aperture electrode and insulator layers. Because the multicusp plasma source can achieve uniform ion density over a large area, it can be used in conjunction with the array of microcolumns, for massively parallel FIB processing to achieve reasonable exposure throughput.

  11. High Gradient Two-Beam Electron Accelerator

    SciTech Connect (OSTI)

    Jiang, Y. [Beam Physics Laboratory, Yale University, 272 Whitney Ave., New Haven, CT 06511 (United States); Kazakov, S. Yu. [Omega-P, Inc., 258 Bradley St., New Haven, CT 06510 (United States); Fermi National Accelerator Laboratory, Batavia, IL 60510 (United States); Kuzikov, S. V. [Omega-P, Inc., 258 Bradley St., New Haven, CT 06510 (United States); Institute of Applied Physics, Nizhny Novgorod, 603600 (Russian Federation); Hirshfield, J. L. [Beam Physics Laboratory, Yale University, 272 Whitney Ave., New Haven, CT 06511 (United States); Omega-P, Inc., 258 Bradley St., New Haven, CT 06510 (United States)

    2010-11-04T23:59:59.000Z

    A high-gradient two-beam electron accelerator structure using detuned cavities is described. A self-consistent theory based on a circuit model is presented to calculate idealized acceleration gradient, transformer ratio, and efficiency for energy transfer from the drive beam to the accelerated beam. Experimental efforts are being carried out to demonstrate this acceleration concept.

  12. Laser Telecommunication timeLaser beam

    E-Print Network [OSTI]

    La Rosa, Andres H.

    Laser Telecommunication Experiment Laser time Laser beam intensity timeLaser beam Laser battery Laser connected to a circuit without a modulator. Bottom graph illustrates what happen when a modulating signal is superimposed to the DC voltage driving the laser Laser beam intensity DC Input voltage DC

  13. Nondestructive Damage Detection in General Beams 

    E-Print Network [OSTI]

    Dincal, Selcuk

    2010-12-08T23:59:59.000Z

    Representation of the First Damage Case on the Finite Element Mesh of the Slender Beam ...................................................... 41 Figure 3.12 Schematic Representation of the Second Damage Case on the Finite Element Mesh... of the Slender Beam ...................................................... 42 Figure 3.13 Schematic Representation of the Third Damage Case on the Finite Element Mesh of the Slender Beam ...................................................... 44...

  14. JET neutral beam power upgrade Introduction

    E-Print Network [OSTI]

    JET neutral beam power upgrade Introduction A tokamak is a complex assembly, a system of systems the challenging requirements that fusion demands. The neutral beam heating system and its upgrade for the JET systems) are the main plasma heating scheme on fusion devices such as JET and ITER. The JET neutral beam

  15. Beam heat load in superconducting wigglers

    E-Print Network [OSTI]

    Casalbuoni, S

    2013-01-01T23:59:59.000Z

    The beam heat load is a fundamental input parameter for the design of superconducting wigglers since it is needed to specify the cooling power. In this presentation I will review the possible beam heat load sources and the measurements of beam heat load performed and planned onto the cold vacuum chambers installed at different synchrotron light sources.

  16. Lateral stability of long precast concrete beams

    E-Print Network [OSTI]

    Burgoyne, Chris

    buckling L length of beam vx lateral de¯ection measured in the minor- axis direction (which rotates with yLateral stability of long precast concrete beams T. J. Stratford, BA, BEng, and C. J. Burgoyne, BA, making them more susceptible to buckling failure. This paper shows that once the beam is positioned

  17. Results of long range beam-beam studies and observations during operation in the LHC

    E-Print Network [OSTI]

    Alemany, R; Buffat, X; Calaga, R; Fitterer, M; Giachino, R; Hemelsoet, GH; Herr, W; Papotti, G; Pieloni, T; Poyer, M; Schaumann, M; Trad, G; Wollmann, D

    2011-01-01T23:59:59.000Z

    We studied possible limitations due to the long range beam-beam effects in the LHC. With a larger number of bunches and collisions in all interaction points, we have reduced the crossing angles to enhance long range beam-beam effects to evaluate their influence on dynamic aperture and losses. Experience from operation with reduced separation was analysed and provides additional evidence.

  18. Albeni Falls Wildlife Mitigation Project, 2001 Annual Report.

    SciTech Connect (OSTI)

    Terra-Burns, Mary (Idaho Department of Fish and Game, Albeni Falls Interagency Work Group, Boise, ID)

    2002-02-11T23:59:59.000Z

    The Albeni Falls Interagency Work Group was actively engaged in implementing wildlife mitigation activities in 2001. The Work Group met quarterly to discuss management and budget issues affecting the Albeni Falls Wildlife Mitigation Program. Work Group members protected 851 acres of wetland habitat in 2001. Wildlife habitat protected to date for the Albeni Falls project is approximately 5,248.31 acres ({approx}4,037.48 Habitat Units). Approximately 14% of the total wildlife habitat lost has been mitigated. Administrative activities increased as funding was more evenly distributed among Work Group members and protection opportunities became more time consuming. In 2001, Work Group members focused on development and implementation of the monitoring and evaluation program as well as completion of site-specific management plans. With the implementation of the monitoring and evaluation program, and as management plans are reviewed and executed, on the ground management activities are expected to increase in 2002.

  19. Electron beam diagnostic for space charge measurement of an ion beam

    SciTech Connect (OSTI)

    Roy, Prabir K.; Yu, Simon S.; Henestroza, Enrique; Eylon, Shmuel; Shuman, Derek B.; Ludvig, Jozsef; Bieniosek, Frank M.; Waldron, William L.; Greenway, Wayne G.; Vanecek, David L.; Hannink, Ryan; Amezcua, Monserrat

    2004-09-25T23:59:59.000Z

    A non-perturbing electron beam diagnostic system for measuring the charge distribution of an ion beam is developed for Heavy Ion Fusion (HIF) beam physics studies. Conventional diagnostics require temporary insertion of sensors into the beam, but such diagnostics stop the beam, or significantly alter its properties. In this diagnostic a low energy, low current electron beam is swept transversely across the ion beam; the measured electron beam deflection is used to infer the charge density profile of the ion beam. The initial application of this diagnostic is to the Neutralized Transport Experiment (NTX), which is exploring the physics of space-charge-dominated beam focusing onto a small spot using a neutralizing plasma. Design and development of this diagnostic and performance with the NTX ion beamline is presented.

  20. Stability of Single Particle Motion with Head-On Beam-Beam Compensation in the RHIC

    SciTech Connect (OSTI)

    Luo,Y.; Fischer, W.; Abreu, N.

    2008-05-01T23:59:59.000Z

    To compensate the large tune shift and tune spread generated by the head-on beam-beam interactions in the polarized proton run in the Relativistic Heavy Ion Collider (RHIC), we proposed a low energy electron beam with a Gaussian transverse profiles to collide head-on with the proton beam. In this article, with a weak-strong beam-beam interaction model, we investigate the stability of single particle motion in the presence of head-on beam-beam compensation. Tune footprints, tune diffusion, Lyapunov exponents, and 10{sup 6} turn dynamic apertures are calculated and compared between the cases without and with beam-beam compensation. A tune scan is performed and the possibility of increasing the bunch intensity is studied. The cause of tune footprint foldings is discussed, and the tune diffusion and Lyapunov exponent analysis are compared.

  1. Summary of session 3 on synchrotron radiation and beam dynamics

    SciTech Connect (OSTI)

    Shiltsev, V.; /Fermilab; Metral, E.; /CERN

    2010-12-01T23:59:59.000Z

    We summarize presentations, discussions and general conclusions of the Workshop session on 'Beam Dynamics Issues'. Major subjects include effects due to synchrotron radiation (SR), cryogenic loads, electron cloud, impedances, intra-beam scattering (IBS) and beam-beam interactions.

  2. Beam intensity upgrade at Fermilab

    SciTech Connect (OSTI)

    Marchionni, A.; /Fermilab

    2006-07-01T23:59:59.000Z

    The performance of the Fermilab proton accelerator complex is reviewed. The coming into operation of the NuMI neutrino line and the implementation of slip-stacking to increase the anti-proton production rate has pushed the total beam intensity in the Main Injector up to {approx} 3 x 10{sup 13} protons/pulse. A maximum beam power of 270 kW has been delivered on the NuMI target during the first year of operation. A plan is in place to increase it to 350 kW, in parallel with the operation of the Collider program. As more machines of the Fermilab complex become available with the termination of the Collider operation, a set of upgrades are being planned to reach first 700 kW and then 1.2 MW by reducing the Main Injector cycle time and by implementing proton stacking.

  3. Oxygen ion-beam microlithography

    DOE Patents [OSTI]

    Tsuo, Y. Simon (Lakewood, CO)

    1991-01-01T23:59:59.000Z

    A method of providing and developing a resist on a substrate for constructing integrated circuit (IC) chips includes the following steps: of depositing a thin film of amorphous silicon or hydrogenated amorphous silicon on the substrate and exposing portions of the amorphous silicon to low-energy oxygen ion beams to oxidize the amorphous silicon at those selected portions. The nonoxidized portions are then removed by etching with RF-excited hydrogen plasma. Components of the IC chip can then be constructed through the removed portions of the resist. The entire process can be performed in an in-line vacuum production system having several vacuum chambers. Nitrogen or carbon ion beams can also be used.

  4. Oxygen ion-beam microlithography

    DOE Patents [OSTI]

    Tsuo, Y.S.

    1991-08-20T23:59:59.000Z

    A method of providing and developing a resist on a substrate for constructing integrated circuit (IC) chips includes the following steps: of depositing a thin film of amorphous silicon or hydrogenated amorphous silicon on the substrate and exposing portions of the amorphous silicon to low-energy oxygen ion beams to oxidize the amorphous silicon at those selected portions. The nonoxidized portions are then removed by etching with RF-excited hydrogen plasma. Components of the IC chip can then be constructed through the removed portions of the resist. The entire process can be performed in an in-line vacuum production system having several vacuum chambers. Nitrogen or carbon ion beams can also be used. 5 figures.

  5. The MICE Muon Beam Line

    SciTech Connect (OSTI)

    Apollonio, Marco [High Energy Physics Group, Department of Physics, Imperial College London SW7 2AZ (United Kingdom)

    2011-10-06T23:59:59.000Z

    In the Muon Ionization Cooling Experiment (MICE) at RAL, muons are produced and transported in a dedicated beam line connecting the production point (target) to the cooling channel. We discuss the main features of the beamline, meant to provide muons with momenta between 140 MeV/c and 240 MeV/c and emittances up to 10 mm rad, which is accomplished by means of a diffuser. Matching procedures to the MICE cooling channel are also described. In summer 2010 we performed an intense data taking campaign to finalize the calibration of the MICE Particle Identification (PID) detectors and the understanding of the beam line, which completes the STEPI phase of MICE. We highlight the main results from these data.

  6. Neutron beam testing of triblades

    SciTech Connect (OSTI)

    Michalak, Sarah E [Los Alamos National Laboratory; Du Bois, Andrew J [Los Alamos National Laboratory; Storlie, Curtis B [Los Alamos National Laboratory; Rust, William N [Los Alamos National Laboratory; Du Bois, David H [Los Alamos National Laboratory; Modl, David G [Los Alamos National Laboratory; Quinn, Heather M [Los Alamos National Laboratory; Blanchard, Sean P [Los Alamos National Laboratory; Manuzzato, Andrea [UNIV DEGLI STUDI DI PADOVA ITALY

    2010-12-16T23:59:59.000Z

    Four IBM Triblades were tested in the Irradiation of Chips and Electronics facility at the Los Alamos Neutron Science Center. Triblades include two dual-core Opteron processors and four PowerXCell 8i (Cell) processors. The Triblades were tested in their field configuration while running different applications, with the beam aimed at the Cell processor or the Opteron running the application. Testing focused on the Cell processors, which were tested while running five different applications and an idle condition. While neither application nor Triblade was statistically important in predicting the hazard rate, the hazard rate when the beam was aimed at the Opterons was significantly higher than when it was aimed at the Cell processors. In addition, four Cell blades (one in each Triblade) suffered voltage shorts, leading to their inoperability. The hardware tested is the same as that in the Roadrunner supercomputer.

  7. Fresnel diffraction patterns as accelerating beams

    E-Print Network [OSTI]

    Zhang, Yiqi; Zheng, Huaibin; Wu, Zhenkun; Li, Yuanyuan; Lu, Keqing; Zhang, Yanpeng

    2013-01-01T23:59:59.000Z

    We demonstrate that beams originating from Fresnel diffraction patterns are self-accelerating in free space. In addition to accelerating and self-healing, they also exhibit parabolic deceleration property, which is in stark contrast to other accelerating beams. We find that the trajectory of Fresnel paraxial accelerating beams is similar to that of nonparaxial Weber beams. Decelerating and accelerating regions are separated by a critical propagation distance, at which no acceleration is present. During deceleration, the Fresnel diffraction beams undergo self-smoothing, in which oscillations of the diffracted waves gradually focus and smooth out at the critical distance.

  8. Beam Cooling with ionisation losses

    E-Print Network [OSTI]

    C. Rubbia; A. Ferrari; Y. Kadi; V. Vlachoudis

    2006-02-03T23:59:59.000Z

    A novel type of particle "cooling", called Ionization Cooling, is applicable to slow (v of the order of 0.1c) ions stored in a small ring. The many traversals through a thin foil enhance the nuclear reaction probability, in a steady configuration in which ionisation losses are recovered at each turn by a RF-cavity. For a uniform target "foil" the longitudinal momentum spread diverges exponentially since faster (slower) particles ionise less (more) than the average. In order to "cool" also longitudinally, a chromaticity has to be introduced with a wedge shaped "foil". Multiple scattering and straggling are then "cooled" in all three dimensions, with a method similar to the one of synchrotron cooling, but valid for low energy ions. Particles then stably circulate in the beam indefinitely, until they undergo for instance nuclear processes in the thin target foil. This new method is under consideration for the nuclear production of a few MeV/A ion beams. Simple reactions, for instance Li 7 + D Li 8 + p, are more favourably exploited with the heavier ion colliding against a gas-jet D2 target. Kinematics is generally very favourable, with emission angles in a narrow angular cone and a relatively concentrated outgoing energy spectrum which allows an efficient collection as a neutral gas in a tiny volume with a technology at high temperatures perfected at ISOLDE. It is however of a much more general applicability. The method appears capable of producing a "table top" storage ring with an accumulation rate in excess of 10**14 Li-8 radioactive ion/s for possible use for radioactive beams for physics studies (for example for beta-beams) or for therapy.

  9. X-ray beam finder

    DOE Patents [OSTI]

    Gilbert, H.W.

    1983-06-16T23:59:59.000Z

    An X-ray beam finder for locating a focal spot of an X-ray tube includes a mass of X-ray opaque material having first and second axially-aligned, parallel-opposed faces connected by a plurality of substantially identical parallel holes perpendicular to the faces and a film holder for holding X-ray sensitive film tightly against one face while the other face is placed in contact with the window of an X-ray head.

  10. Scattering apodizer for laser beams

    DOE Patents [OSTI]

    Summers, M.A.; Hagen, W.F.; Boyd, R.D.

    1984-01-01T23:59:59.000Z

    A method is disclosed for apodizing a laser beam to smooth out the production of diffraction peaks due to optical discontinuities in the path of the laser beam, such method comprising introduction of a pattern of scattering elements for reducing the peak intensity in the region of such optical discontinuities, such pattern having smoothly tapering boundaries in which the distribution density of the scattering elements is tapered gradually to produce small gradients in the distribution density, such pattern of scattering elements being effective to reduce and smooth out the diffraction effects which would otherwise be produced. The apodizer pattern may be produced by selectively blasting a surface of a transparent member with fine abrasive particles to produce a multitude of minute pits. In one embodiment, a scattering apodizer pattern is employed to overcome diffraction patterns in a multiple element crystal array for harmonic conversion of a laser beam. The interstices and the supporting grid between the crystal elements are obscured by the gradually tapered apodizer pattern of scattering elements.

  11. Scattering apodizer for laser beams

    DOE Patents [OSTI]

    Summers, Mark A. (Livermore, CA); Hagen, Wilhelm F. (Livermore, CA); Boyd, Robert D. (Livermore, CA)

    1985-01-01T23:59:59.000Z

    A method is disclosed for apodizing a laser beam to smooth out the production of diffraction peaks due to optical discontinuities in the path of the laser beam, such method comprising introduction of a pattern of scattering elements for reducing the peak intensity in the region of such optical discontinuities, such pattern having smoothly tapering boundaries in which the distribution density of the scattering elements is tapered gradually to produce small gradients in the distribution density, such pattern of scattering elements being effective to reduce and smooth out the diffraction effects which would otherwise be produced. The apodizer pattern may be produced by selectively blasting a surface of a transparent member with fine abrasive particles to produce a multitude of minute pits. In one embodiment, a scattering apodizer pattern is employed to overcome diffraction patterns in a multiple element crystal array for harmonic conversion of a laser beam. The interstices and the supporting grid between the crystal elements are obscured by the gradually tapered apodizer pattern of scattering elements.

  12. Generation of low-divergence laser beams

    DOE Patents [OSTI]

    Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

    1993-01-01T23:59:59.000Z

    Apparatus for transforming a conventional beam of coherent light, having a Gaussian energy distribution and relatively high divergence, into a beam in which the energy distribution approximates a single, non-zero-order Bessel function and which therefore has much lower divergence. The apparatus comprises a zone plate having transmitting and reflecting zones defined by the pattern of light interference produced by the combination of a beam of coherent light with a Gaussian energy distribution and one having such a Bessel distribution. The interference pattern between the two beams is a concentric array of multiple annuli, and is preferably recorded as a hologram. The hologram is then used to form the transmitting and reflecting zones by photo-etching portions of a reflecting layer deposited on a plate made of a transmitting material. A Bessel beam, containing approximately 50% of the energy of the incident beam, is produced by passing a Gaussian beam through such a Bessel zone plate. The reflected beam, also containing approximately 50% of the incident beam energy and having a Bessel energy distribution, can be redirected in the same direction and parallel to the transmitted beam. Alternatively, a filter similar to the Bessel zone plate can be placed within the resonator cavity of a conventional laser system having a front mirror and a rear mirror, preferably axially aligned with the mirrors and just inside the front mirror to generate Bessel energy distribution light beams at the laser source.

  13. Generation of low-divergence laser beams

    DOE Patents [OSTI]

    Kronberg, J.W.

    1993-09-14T23:59:59.000Z

    Apparatus for transforming a conventional beam of coherent light, having a Gaussian energy distribution and relatively high divergence, into a beam in which the energy distribution approximates a single, non-zero-order Bessel function and which therefore has much lower divergence. The apparatus comprises a zone plate having transmitting and reflecting zones defined by the pattern of light interference produced by the combination of a beam of coherent light with a Gaussian energy distribution and one having such a Bessel distribution. The interference pattern between the two beams is a concentric array of multiple annuli, and is preferably recorded as a hologram. The hologram is then used to form the transmitting and reflecting zones by photo-etching portions of a reflecting layer deposited on a plate made of a transmitting material. A Bessel beam, containing approximately 50% of the energy of the incident beam, is produced by passing a Gaussian beam through such a Bessel zone plate. The reflected beam, also containing approximately 50% of the incident beam energy and having a Bessel energy distribution, can be redirected in the same direction and parallel to the transmitted beam. Alternatively, a filter similar to the Bessel zone plate can be placed within the resonator cavity of a conventional laser system having a front mirror and a rear mirror, preferably axially aligned with the mirrors and just inside the front mirror to generate Bessel energy distribution light beams at the laser source. 11 figures.

  14. Particle beam injector system and method

    DOE Patents [OSTI]

    Guethlein, Gary

    2013-06-18T23:59:59.000Z

    Methods and devices enable coupling of a charged particle beam to a radio frequency quadrupole accelerator. Coupling of the charged particle beam is accomplished, at least in-part, by relying on of sensitivity of the input phase space acceptance of the radio frequency quadrupole to the angle of the input charged particle beam. A first electric field across a beam deflector deflects the particle beam at an angle that is beyond the acceptance angle of the radio frequency quadrupole. By momentarily reversing or reducing the established electric field, a narrow portion of the charged particle beam is deflected at an angle within the acceptance angle of the radio frequency quadrupole. In another configuration, beam is directed at an angle within the acceptance angle of the radio frequency quadrupole by the first electric field and is deflected beyond the acceptance angle of the radio frequency quadrupole due to the second electric field.

  15. CE 467 / 567 HIGHWAY SAFETY AND OPERATIONS Fall 2006 Course Syllabus

    E-Print Network [OSTI]

    Hickman, Mark

    1 CE 467 / 567 HIGHWAY SAFETY AND OPERATIONS Fall 2006 Course Syllabus Catalog This course of class) #12;2 CE 467 / 567 HIGHWAY SAFETY AND OPERATIONS Fall 2006 Course Syllabus Course Outline: What

  16. CLAS C308 Roman Law C. J. Bannon SYLLABUS Fall 2012

    E-Print Network [OSTI]

    Indiana University

    CLAS C308 Roman Law C. J. Bannon SYLLABUS Fall 2012 Professor Cynthia J. Bannon Office: Ballantine% Research Paper 20% #12;CLAS C308 Roman Law C. J. Bannon SYLLABUS Fall 2012 Course Policies and Expectations

  17. 2nd Annual National Safety Awareness Event to Prevent Falls in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    nd Annual National Safety Awareness Event to Prevent Falls in Construction 2nd Annual National Safety Awareness Event to Prevent Falls in Construction April 27, 2015 - 8:08am...

  18. Footsteps Toward Understanding Fall Risk and Quality of Life in People with Diabetic Peripheral Neuropathy

    E-Print Network [OSTI]

    Jernigan, Stephen

    2011-04-25T23:59:59.000Z

    , & Studenski, 1992). The utility of these tools has led to their validation in people with a known increased risk of falls due to problems such as Parkinson’s disease(Dibble, Christensen, Ballard, & Foreman, 2008), vestibular dysfunction(Marchetti, Whitney... of the aforementioned fall risk assessment tools in people with DPN. Ideally, these types of studies would use prospective methods to determine whether or not fall risk assessment tools accurately identify people at risk of falling.(Dibble & Lange, 2006; Rubenstein...

  19. EEC 116, Fall 2012, B. Baas 35 VLSI Design is Like Art

    E-Print Network [OSTI]

    Baas, Bevan

    · Full control of paint boundaries #12;EEC 116, Fall 2012, B. Baas 37 Full-Custom Source: Rembrandt van

  20. Term: Fall 2013 Spring 2014 University of Pittsburgh

    E-Print Network [OSTI]

    Sibille, Etienne

    Term: Fall 2013 ­ Spring 2014 University of Pittsburgh HOUSING/DINING SERVICES CONTRACT/Dining Services Contract (this "Contract") is made by and between the University of Pittsburgh's Housing/Dining Services Contract does not guarantee admission to the University. Applicants

  1. LSRCP Response to ISRP Snake River Fall Chinook Program Review

    E-Print Network [OSTI]

    M & E needs necessary to obtain an ESA section 10 permit to operate Lyons Ferry Hatchery. LSRCP assumes that the Section 10 permit will be consistent with the Snake River Fall Chinook Recovery Plan when Plans (HGMPs) and received ESA Section 10 Permit coverage. 2. Evaluate hatchery/wild salmon interactions

  2. FORESTRY, BSF IPC: 6/15/2011 EFFECTIVE: Fall 2011

    E-Print Network [OSTI]

    Selmic, Sandra

    FORESTRY, BSF IPC: 6/15/2011 EFFECTIVE: Fall 2011 SCHOOL OF FORESTRY GENERAL EDUCATION REQUIREMENTS: PROFESSIONAL COURSES: GRADE SCH GRADE SCH ARTS: FORESTRY CORE: ART 290/HPE 280/MUGN 290/SPTH 290 3 FOR/WILD 111 Intro to Forestry & Wildlife Management 2 FOR 201 Microcomputer Applications 3 ENGL COMPOSITION: FOR 202

  3. Updated 01/14 When to Look for Fall Housing

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Updated 01/14 When to Look for Fall Housing Most landlords do not know when their rental in August to give yourself plenty of time if you didn't locate housing the previous spring quarter listings, mostly units, but also rooms in shared housing. Locate them in our Rental Listings by searching

  4. ORE 654: Applications of Ocean Acoustics Fall Semester 2014

    E-Print Network [OSTI]

    Frandsen, Jannette B.

    of this course is to provide the ocean engineering student an understanding of how sound propagates through: Ocean engineering specialization Program Outcome 5: Use of latest tools in ocean engineering ProgramORE 654: Applications of Ocean Acoustics Syllabus Fall Semester 2014 Tuesday/Thursday 12:00-1:15 PM

  5. COMPUTER ENGINEERING CURRICULUM GUIDE Fall 2012 Spring 2013

    E-Print Network [OSTI]

    COMPUTER ENGINEERING CURRICULUM GUIDE Fall 2012 ­ Spring 2013 ACADEMIC REQUIREMENTS 1. REQUIRED TOTAL CREDITS Computer Engineering Degree, 127 A minimum of 42 upper-division semester credits (300 by the Electrical and Computer Engineering Department. 2. GRADE REQUIREMENTS University ­ 2.00 GPA College

  6. History of Economic Thought Econ 426, Binghamton University, Fall 2010

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    -1- History of Economic Thought Econ 426, Binghamton University, Fall 2010 Instructor: Dr. Florenz: A History of Economic Theory and Method, 5th ed., 2007, Waveland Press ($82.95). You can use a copy of the 4 on the History of Economic Thought (e.g. History of Economic Thought by Harry Landreth and David Colander [any

  7. Campus Recreational Services Fall 2014 Personal Training Internship

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Campus Recreational Services Fall 2014 Personal Training Internship OUT 395 ­ Independent Study The Personal Training Internship is designed to prepare students for the national American Council on Exercise internship offered to ALL undergraduate and graduate students (non-required OUT credits). Topics will include

  8. EIS-0397: Lyle Falls Fish Passage Project, WA

    Broader source: Energy.gov [DOE]

    This EIS analyzes BPA's decision to modify funding to the existing Lyle Falls Fishway on the lower Klickitat River in Klickitat County, WA. The proposed project would help BPA meet its off-site mitigation responsibilities for anadromous fish affected by the development of the Federal Columbia River Power System and increase overall fish production in the Columbia Basin.

  9. Environmental Research Group 2014 Fall Seminar Series, Gregg Hall 320

    E-Print Network [OSTI]

    Environmental Research Group 2014 Fall Seminar Series, Gregg Hall 320 September 26, 2014, 12:00 ­ 1 and environmental impact. This presentation will describe results in non-covalent derivatization and bioinspired care products, solar energy and construction and paving materials are examples of how green chemistry

  10. MICROBIAL ECOLOGY BIOL 4115 FALL 2014 RESEARCH PAPER GUIDLINES

    E-Print Network [OSTI]

    Christner, Brent C.

    MICROBIAL ECOLOGY ­ BIOL 4115 ­ FALL 2014 RESEARCH PAPER GUIDLINES Purpose: To develop and evaluate of oil Google Scholar, Web of Science, and PubMed are all good options for searching scientific articles examples: General topic Specific topic Anaerobic ammonia oxidation Anaerobic removal of nitrogen

  11. COURSE SYLLABUS OSE 4470 FALL 2014 `FIBER-OPTIC COMMUNICATIONS'

    E-Print Network [OSTI]

    Van Stryland, Eric

    COURSE SYLLABUS OSE 4470 FALL 2014 `FIBER-OPTIC COMMUNICATIONS' INSTRUCTOR: SASAN FATHPOUR CLASS of optical fiber communication systems including the optoelectronic devices used in transmitters and receivers. COURSE DESCRIPTION This course is an introduction to the principles of optical fiber

  12. Geology 460:301 Fall 2007 Mineralogy Lab

    E-Print Network [OSTI]

    Geology 460:301 Fall 2007 Mineralogy Lab Professor Jeremy Delaney Teaching Assistant: Alissa Henza Science by Cornelius Klein (22nd edition) Introduction to Optical Mineralogy by William Nesse Grading Policy: Lab is 33% of your Mineralogy grade. This 33% is made up of: Labs: 70% Quizzes: 5% Final Exam: 25

  13. Fall `10 Seminar Series Department of Materials Science and Engineering

    E-Print Network [OSTI]

    Gilchrist, James F.

    Fall `10 Seminar Series Department of Materials Science and Engineering Center for Advanced of Materials Science & Eng., University of Utah "Strain Engineering and Nanomechanical Architecture for Self Materials and Nanotechnology Seminar ­ 4:10 p.m. ­ WH 203 Refreshments served at 3:45 p.m. in Student Lounge

  14. Ecology, Evolution and Behavior Seminar Series Fall Semester 2013

    E-Print Network [OSTI]

    Beex, A. A. "Louis"

    Ecology, Evolution and Behavior Seminar Series Fall Semester 2013 All seminars except dates labeled alters female behavior and physiology in feral horses Sept. 19 Noah Fierer Univ Colorado Boulder Ecology, perception, and the evolution of animal communication systems Sewall Nov. 14 Eric Walters Old Dominion Unv

  15. Sustainability Management K4100 Section 001, Fall 2013

    E-Print Network [OSTI]

    Sustainability Management K4100 Section 001, Fall 2013 Time: Wednesdays 6:10-8:00 PM Professor@columbia.edu Sarah Volkman: e-mail: sv2372@columbia.edu Course Objectives: Sustainability management of sustainability management. This is not an academic course that reviews the literature of the field and discusses

  16. Order and Containment in Concurrent System Design Copyright Fall 2000

    E-Print Network [OSTI]

    Order and Containment in Concurrent System Design Copyright Fall 2000 by John Sidney Davis II #12;1 Abstract Order and Containment in Concurrent System Design by John Sidney Davis II Doctor of Philosophy in Engineering-Electrical Engineering and Computer Science University of California at Berkeley Professor Edward

  17. Electrical and Computer Engineering (ECE) FALL 2010-SPRING 2011

    E-Print Network [OSTI]

    Schurgers, Curt

    Electrical and Computer Engineering (ECE) FALL 2010-SPRING 2011 Undergraduate Affairs, Room 2705 knowledge of mathematics, science, and engineering to electrical engineering problems 2. An ability The Department of Electrical and Computer Engineering offers undergraduate programs leading to the B.S. degree

  18. ELECTRICAL ENGINEERING CURRICULUM GUIDE Fall 2012 Spring 2013

    E-Print Network [OSTI]

    ELECTRICAL ENGINEERING CURRICULUM GUIDE Fall 2012 ­ Spring 2013 ACADEMIC REQUIREMENTS 1. REQUIRED TOTAL CREDITS Electrical Engineering, 125-126 A minimum of 42 upper-division semester credits (300 by the Electrical and Computer Engineering Department. The Lasers & Optical Engineering concentration is also 125

  19. Syllabus: Applied Environmental Geophysics MGG 525 Fall 2011, 3 credits

    E-Print Network [OSTI]

    Miami, University of

    1 Syllabus: Applied Environmental Geophysics MGG 525 Fall 2011, 3 credits (Version 110824e) Instructor: Mark Grasmueck, Associate Professor Marine Geology and Geophysics RSMAS University of Miami Tel: The purpose of this course is to familiarize you with the fundamentals of near-surface geophysical site

  20. Department of Mechanical Engineering Fall 2011 Flowserve Vibration Energy Harvesting

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Mechanical Engineering Fall 2011 Flowserve Vibration Energy Harvesting of these vibrations, Flowseve is looking at using vibration absorbers coupled with energy harvesting technology a steady state DC output The prototype was created using water jet cutting and milling to create the parts

  1. Magazine of Extension research & education Fall 2013 Safer food, from

    E-Print Network [OSTI]

    Netoff, Theoden

    roadmap to economic success Mark Seeley ChartS MinneSota'S Changing CliMate Seeing Patterns 4-H alumni creates a stronger Minnesota 8 The roadmap to economic success 9 Hands-on nutrition education gets results Magazine of Extension research & education Fall 2013 Safer food, from farm to fork Community roadmap

  2. Fall 2011 BOSTONIA 23 In 2009, Image Comics

    E-Print Network [OSTI]

    Spence, Harlan Ernest

    Fall 2011 BOSTONIA 23 In 2009, Image Comics issued a comic book with a cover depicting Barack Obama's real-life end, but the al-Qaeda leader's demise made the Obama-Osama cover a collector's item that now introduced Dust, a Muslim "mutant," or superhuman member of the famed X-Men, only her eyes visible behind her

  3. Transportation Policy Analysis and Systems Planning Fall 2009/2010

    E-Print Network [OSTI]

    Singh, Jaswinder Pal

    SYLLABUS WWS 527a Transportation Policy Analysis and Systems Planning Fall 2009/2010 Course Description Part 1. Perspective on the Transportation Sector of the Economy: Its Function, Its Players, Its of Course Elements of the transportation sector of the economy, the player, the technologies

  4. Department of Industrial Engineering Fall 2011 Terminal Development

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Industrial Engineering Fall 2011 Terminal Development Overview The group as a terminal used for "automated order and payment" in a restaurant or retail setting, replacing a quality finished product. Approach Researched similar terminal products, such as Sheetz ordering system

  5. Soil Properties, Surveys, and Applications GEOG 3220 Fall 2009

    E-Print Network [OSTI]

    Lecce, Scott A.

    Soil Properties, Surveys, and Applications GEOG 3220 Fall 2009 Dr. Scott Lecce Office: A-235, Elements of the Nature and Properties of Soils Course Description: The purpose of this course is to provide a general introduction to soil science for students interested in environmental studies. It is taught from

  6. FRE 306: Global Food Markets Fall Term 2008

    E-Print Network [OSTI]

    Farrell, Anthony P.

    markets such as the introduction of genetically modified foods and the increased importance of food safetyFRE 306: Global Food Markets Fall Term 2008 Instructor: Rick Barichello Rm 339 MacMillan Building Telephone: 822-3473 E-Mail: richard.barichello@ubc.ca Learning Objectives: o Understanding of how food

  7. Gender Studies Graduate Student Library Orientation, Fall 2012

    E-Print Network [OSTI]

    Graham, Nick

    collection based on Library of Congress Classification. Depending on your research focus you may require1 Gender Studies Graduate Student Library Orientation, Fall 2012 Research Resources Librarian for Gender Studies: Sylvia Andrychuk andrychs@queensu.ca Office: Stauffer Library, room 107C Queen

  8. Course Syllabus-Undergrads SWS 4207/5208, Fall 2013

    E-Print Network [OSTI]

    Ma, Lena

    Management 3 Credits, MWF, Period 3 Instructor: George Hochmuth, Professor, IFAS, Soil and Water ScienceCourse Syllabus-Undergrads SWS 4207/5208, Fall 2013 Sustainable Agricultural and Urban Land contamination depends on adopting best management practices (BMPs) for land and nutrient management in the urban

  9. Course Syllabus-Undergrads SWS 4207/5208, Fall 2014

    E-Print Network [OSTI]

    Ma, Lena

    Management 3 Credits, MWF, Period 3 Instructor: George Hochmuth, Professor, IFAS, Soil and Water Science research literature dealing with sustainability of agriculture and urban land management. Class format: AllCourse Syllabus-Undergrads SWS 4207/5208, Fall 2014 Sustainable Agricultural and Urban Land

  10. www.mrs.org/fall2006/ CALL FOR PAPERS

    E-Print Network [OSTI]

    Akhmedov, Azer

    of recent advances in the solid-state chemistry of porous, nano-, and bulk inorganic materials methods of synthesis · Functional materials: optical, optoelectronic, polar, dielectric, ferroelectricwww.mrs.org/fall2006/ CALL FOR PAPERS MRS Symposium QQ: Solid-State Chemistry of Inorganic

  11. ECOLOGY ABIO 320 FALL 2013 DR. CARACO BIOLOGY 253

    E-Print Network [OSTI]

    Caraco, Thomas

    1 ECOLOGY ABIO 320 FALL 2013 DR. CARACO BIOLOGY 253 Course Web Page: www Scores Links to Lectures #12;2 Texts Gotelli, NJ. A Primer of Ecology. 4 th Edit., 2008 (Required ) Alstad, D. Basic Populus Models of Ecology. 2001 [Rec ] Link to Download Populus on Course Web Page

  12. ECE 451 -Fall 2011 Physics of Semiconductor Devices (3)

    E-Print Network [OSTI]

    Gilchrist, James F.

    ECE 451 - Fall 2011 Physics of Semiconductor Devices (3) Electronics and Optoelectronics-Photon Scattering Processes (Optional) 18. Novel Optoelectronics and Electronics Devices (Optional) Structure on Semiconductor Physics and Device Physics, Draft Version (2010). Other Additional References or Readings: 1. J

  13. Thermo Exam 1 pg 1 Fall 2010 RED barcode here

    E-Print Network [OSTI]

    Hart, Gus

    Thermo Exam 1 ­ pg 1 Fall 2010 RED barcode here Physics 123 section 2 Exam 1 Colton 2-3669 Please otherwise instructed, give all numerical answers for the worked problems in SI units, to 3 or 4 significant not get this test booklet back. #12;Thermo Exam 1 ­ pg 2 (15 pts) Problem 1: Multiple choice conceptual

  14. Page 1 of 8 CHEM 3311, Fall 2011

    E-Print Network [OSTI]

    Walba, David

    Page 1 of 8 CHEM 3311, Fall 2011 Professor Walba First Hour Exam September 22, 2011 scores: 1) 20 2) 20 3) 20 4) 25 5) 15 PLEASE read the questions very carefully! H He Li Be B C N O F Na Mg Al Si P: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  15. Page 1 of 8 CHEM 3311, Fall 2011

    E-Print Network [OSTI]

    Walba, David

    Page 1 of 8 CHEM 3311, Fall 2011 Professor Walba Second Hour Exam October 20, 2011 scores: 1) 20 2) 20 3) 20 4) 20 5) 20 100 PLEASE read the questions very carefully! H He Li Be B C N O F Na Mg Al Si P: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  16. Exam 1 Phys 105 Section______Fall 2002 Name__________________________________ ID

    E-Print Network [OSTI]

    Gary, Dale E.

    Exam 1 Phys 105 Section______Fall 2002 Name__________________________________ ID: Closed book exam each. Work out problems are 4 points each. Passing of the exam requires at least 50% of the maximum an expression, a t2 /2 where a is acceleration and t is time. The dimension of this expression in the SI system

  17. College of the Holy Cross Math 125, Fall 2008

    E-Print Network [OSTI]

    Jones, Rafe

    College of the Holy Cross Math 125, Fall 2008 Prof. Jones December 2, 2008 Exam 3 Name: 56tv Total #12;Math 125 Exam 3 2 1. [12 points] Let f be the function whose graph is pictured below (note need to estimate some endpoints. y ~((x) SI 1>0) f

  18. Thermo Exam 2 pg 1 Fall 2010 RED barcode here

    E-Print Network [OSTI]

    Hart, Gus

    Thermo Exam 2 ­ pg 1 Fall 2010 RED barcode here Physics 123 section 2 Exam 2 Colton 2-3669 Please in SI units, to 3 or 4 significant digits. For answers that rely on intermediate results, remember to write down your CID at the top of the page? _________ #12;Thermo Exam 1 ­ pg 2 (15 pts) Problem 1

  19. Math 103A Fall 2006 Exam 1 NAME: Answers

    E-Print Network [OSTI]

    Rogalski, Daniel

    Math 103A Fall 2006 Exam 1 NAME: Answers Problem 1 /30 Problem 2 /20 Problem 3 /30 Problem 4 /20 given by counterclockwise rotation by i degrees. Each Si is a reflection about an axis of symmetry of the square, labeled as follows: (On the actual exam, pictures indicated the axis of reflection

  20. Math 103A Fall 2007 Exam 1 October 31, 2007

    E-Print Network [OSTI]

    Rogalski, Daniel

    Math 103A Fall 2007 Exam 1 October 31, 2007 NAME: Problem 1 /30 Problem 2 /25 Problem 3 /25 Problem of the square given by counterclockwise rotation by i degrees. Each Si is a reflection about an axis of symmetry

  1. Page 1 of 9 CHEM 3311, Fall 2011

    E-Print Network [OSTI]

    Walba, David

    Page 1 of 9 CHEM 3311, Fall 2011 Professor Walba Third Hour Exam November 17, 2011 scores: 1) 20 2) 20 3) 20 4) 20 5) 20 100 PLEASE read the questions very carefully! H He Li Be B C N O F Na Mg Al Si P: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  2. Course Syllabus -BCT 191A -Fall, 2011 The Built Environment

    E-Print Network [OSTI]

    Schweik, Charles M.

    Course Syllabus - BCT 191A - Fall, 2011 The Built Environment Instructor: David T. Damery Office, Holdsworth 110 TEXT & MATERIALS: Reshaping the Built Environment: Ecology, Ethics and Economics, edited the issues of sustainability from the perspective of the built environment, our history of construction

  3. Statistics 36-756: Advanced Statistics II Syllabus: Fall, 2006

    E-Print Network [OSTI]

    Fienberg, Stephen E.

    , Journal of the American Statistical Association, Journal of the Royal Statistical Society, StatisticalStatistics 36-756: Advanced Statistics II Syllabus: Fall, 2006 Instructor: Stephen E. Fienberg 132G: · To consider major topics from statistical theory and the foundations of inference not covered in Statistics 36

  4. LIBRARY RESOURCES & SERVICES New Graduate Student Orientation, Fall 2011

    E-Print Network [OSTI]

    LIBRARY RESOURCES & SERVICES New Graduate Student Orientation, Fall 2011 Stony Brook University Libraries #12;FAST FACTS 2 million books 65,000+ eJournals 300+ subscription databases online 10,000+ eBooks Main Library Humanities, Arts , Social Sciences Branch Libraries Chemistry Math/Physics MASIC

  5. Civil Engineering Flowchart Colorado State University Effective Fall 2009

    E-Print Network [OSTI]

    Freshman CIVE 102 MATH 160 PH 141 (MATH161) Spring CIVE 103 - 3 S Eng Graphics & Comp MATH 161 - 4 Calculus CIVE 300 CHEM 113 CIVE 367 Fall CIVE 402 - 3 F Sen Design Prin CIVE 438 - 3 F,S Pollution Control CIVE

  6. Snake River Fall Chinook Salmon Productivity Nez Perce Tribe

    E-Print Network [OSTI]

    Snake River Fall Chinook Salmon Productivity Jay Hesse Nez Perce Tribe Department of Fisheries salmon abundance and productivity have been and continue to be influenced by construction and operation related to productivity; (1) adult abundance, (2) hatchery programs, (3) management actions, and (4

  7. Chemistry 100 Fall 2011 Page 1 of 5

    E-Print Network [OSTI]

    Indiana University

    Chemistry 100 ­ Fall 2011 Page 1 of 5 The World of Chemistry ­ Course Syllabus Instructor Kirkwood Hall 212 Texts: Required: Chemistry in Context (CC) Course information is online through OnCourse. Course Objective(s): The primary goal of this course is to teach you about the chemistry that surrounds

  8. POVERTY IN THE UNITED STATES Sociology 3505, Fall 2013

    E-Print Network [OSTI]

    Stephens, Jacqueline

    POVERTY IN THE UNITED STATES Sociology 3505, Fall 2013 Tuesdays and Thursdays, 9:00-10:20 AM 214 __________________________________________________________________________________ COURSE DESCRIPTION This course examines the nature and extent of poverty in the United States. Students will gain familiarity with poverty issues as we review topics such as people`s views of poverty, poverty

  9. COMPUTER ALGEBRA FOR ELECTRICAL & COMPUTER ENGINEERS FALL SEMESTER 2010

    E-Print Network [OSTI]

    Kalla, Priyank

    COMPUTER ALGEBRA FOR ELECTRICAL & COMPUTER ENGINEERS FALL SEMESTER 2010 Instructor: Prof. Priyank.ece.utah.edu/~kalla List of Topics to be covered in Class: 1. Commutative Algebra Basics · Preliminaries: Groups, Rings [or Class project ideas] · Model checking using algebraic geometry · Recent work on verification

  10. Physics 137, Section 1, Fall Semester Severe and Hazardous Weather

    E-Print Network [OSTI]

    Hart, Gus

    Physics 137, Section 1, Fall Semester Severe and Hazardous Weather OBSERVATION PROJECTS During project or present one TV-type weather forecast. A list of a few possible observational projects is here of the project, information in the report might include times, dates and places of observations; weather

  11. Charges for Technology Fall 2014 / Spring 2015 / Summer 2015

    E-Print Network [OSTI]

    Charges for Technology Fall 2014 / Spring 2015 / Summer 2015 Part Full Part Full Agricultural/A N/A No Veterinary Medicine & Biomedical Sciences 7.50 90.00 N/A N/A No Charges for Technology are assessed to students based on their declared major/program to support college technology needs for students

  12. Alex Linares UPP 502, Planning Skills, Fall 2012

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    and brickyards. In 1852, the opening of the Rock Island railroad also contributed to Blue Island's growth. Blue to block traffic on the Rock Island rail line. On June 30th , 1894, two workers blocked the Rock Island. Source: 2005 Land Use Inventory, Version 1.0, CMAP #12;Alex Linares UPP 502, Planning Skills, Fall 2012

  13. CONDUCTION HEAT TRANSFER Dr. Ruhul Amin Fall 2011

    E-Print Network [OSTI]

    Dyer, Bill

    ME 525 CONDUCTION HEAT TRANSFER Dr. Ruhul Amin Fall 2011 Office: 201C Roberts Hall Lecture Room of conduction heat transfer. Important results which are useful for engineering application will also: 121 Roberts Hall Phone: 994-6295 Lecture Periods: 12:45- 2:00, TR TEXT: Heat Conduction, M. N. Ozisik

  14. Energy and Society Fall 2014 Problem Set 6

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Energy and Society Fall 2014 Problem Set 6 ER100 105 points ER 200 113 points 1. Comparing PV costs system and the levelized cost of solar energy in San Francisco, CA (2,500 kWh/m2 - year); New York City for calculating the levelized cost of electricity. [6 points] 2. Wind Power Analysis [18 points grad, 10 points

  15. Effective Fall 2014 Requirements for the Urban Architecture and

    E-Print Network [OSTI]

    Effective Fall 2014 8.20.14 Requirements for the Urban Architecture and Urban Design Specialization Required Core Courses: (13 credits) ________ ARCH 507 Sustainable Urbanism (3 credits) ________ ARCH 535 as part of the urban architecture specialization in Portland. In the case that one or more of these course

  16. CSU ATS703 Fall 2012 Numerical Weather Prediction

    E-Print Network [OSTI]

    CSU ATS703 Fall 2012 Numerical Weather Prediction ATS703 is based on the course notes and papers method. A crucial element of accurate weather prediction is initialization, which is briefly discussed in Chapter 11. In the next decade, numerical weather prediction will expe- rience a revolution in model

  17. EEE 6397 Semiconductor Device Theory (Fall, 2014, 5th

    E-Print Network [OSTI]

    Fang, Yuguang "Michael"

    1 EEE 6397 Semiconductor Device Theory (Fall, 2014, 5th period MWF, BEN328) Goals: (1) Develop fundamental understanding on the device physics of the most important semiconductor devices, such as PN junctions, metal-semiconductor contacts, metal-oxide-semiconductor capacitors, and field-effect transistors

  18. Top 50 Textbook Reserves List University Libraries, Fall 2014

    E-Print Network [OSTI]

    Gruner, Daniel S.

    Top 50 Textbook Reserves List University Libraries, Fall 2014 Alphabetical By Course Ask for the books at the McKeldin Library Services Desk! [Note to staff: Call # is course code and beginning Project Management (6th ed) 9781285068374 ENES 210 FCH1 Pratt/Green Entrepreneurial Strategic Decision

  19. Advanced Calculus I (Math 309) Fall 2005 Lecture Notes

    E-Print Network [OSTI]

    Bohner, Martin

    ); (iii) invertible if f is both one-to-one and onto, and then f-1 : Y X is called the inverse function the composite function of f and g. Proposition 1.11. A function f : X Y is invertible iff there existsAdvanced Calculus I (Math 309) Fall 2005 Lecture Notes Martin Bohner Version from December 4, 2005

  20. 15PCI Journal | Fall 2012 2012PCIJournalAwardsannounced

    E-Print Network [OSTI]

    15PCI Journal | Fall 2012 2012PCIJournalAwardsannounced Each year, PCI bestows four awards on authors of outstanding papers published in the PCI Journal during the previous 12 months. The award-winning papers are selected by the Journal Awards Committee, which is chaired by Paul C. Breeze. The awards

  1. Geology 103 The Dynamic Earth Syllabus and Schedule Fall 2007

    E-Print Network [OSTI]

    Kirby, Carl S.

    Geology 103 ­ The Dynamic Earth Syllabus and Schedule ­ Fall 2007 Dr. Carl Kirby 9:30-10:52 TTh O'Leary 232 Office: 226 O'Leary Lab T or Th 1-5 O'Leary 218 www.facstaff.bucknell.edu/kirby/ 577-1385; kirby

  2. BEE 4710. Introduction to Groundwater Fall Semester 2006

    E-Print Network [OSTI]

    Walter, M.Todd

    BEE 4710. Introduction to Groundwater Fall Semester 2006 Credit: 3 hours Catalogue description: Introduction, Field trip in afternoon Principles of groundwater flow Flow to Wells Properties of aquifiers Soil occurrence Groundwater models Water Quality Groundwater quality monitoring Vadose water quality monitoring

  3. University of California, Berkeley Fall 2003 Energy and Resources Group

    E-Print Network [OSTI]

    Kammen, Daniel M.

    themes in the class will include gender and energy, renewable energy alternatives, risk managementUniversity of California, Berkeley Fall 2003 Energy and Resources Group Advanced Graduate Seminar Public Policy 290 - Energy and Development Professor Daniel M. Kammen Energy and Resources Group

  4. National Small Business Federal Contracting Summit-DC Fall Conference

    Broader source: Energy.gov [DOE]

    The 2014 National Small Business Federal Contracting Summit - DC Fall Conference is presented jointly by the National Association of Small Business Contractors (the Supplier Council of The American Small Business Chamber of Commerce) and the U.S. Women's Chamber of Commerce in Washington DC.

  5. Larry H. & Gail Miller Enrichment Scholarship Fall 2015 Application Information

    E-Print Network [OSTI]

    Feschotte, Cedric

    Larry H. & Gail Miller Enrichment Scholarship Fall 2015 Application Information The University benefits and enriches the educational experiences of all students, faculty and staff. Thus the U strives/leadership service. The Miller Enrichment Scholarship award may include any or all of the following benefits: Full

  6. Integral window/photon beam position monitor and beam flux detectors for x-ray beams

    DOE Patents [OSTI]

    Shu, Deming (Darien, IL); Kuzay, Tuncer M. (Naperville, IL)

    1995-01-01T23:59:59.000Z

    A monitor/detector assembly in a synchrotron for either monitoring the position of a photon beam or detecting beam flux may additionally function as a vacuum barrier between the front end and downstream segment of the beamline in the synchrotron. A base flange of the monitor/detector assembly is formed of oxygen free copper with a central opening covered by a window foil that is fused thereon. The window foil is made of man-made materials, such as chemical vapor deposition diamond or cubic boron nitrate and in certain configurations includes a central opening through which the beams are transmitted. Sensors of low atomic number materials, such as aluminum or beryllium, are laid on the window foil. The configuration of the sensors on the window foil may be varied depending on the function to be performed. A contact plate of insulating material, such as aluminum oxide, is secured to the base flange and is thereby clamped against the sensor on the window foil. The sensor is coupled to external electronic signal processing devices via a gold or silver lead printed onto the contact plate and a copper post screw or alternatively via a copper screw and a copper spring that can be inserted through the contact plate and coupled to the sensors. In an alternate embodiment of the monitor/detector assembly, the sensors are sandwiched between the window foil of chemical vapor deposition diamond or cubic boron nitrate and a front foil made of similar material.

  7. Long-term surveillance plan for the Falls City Disposal Site, Falls City, Texas. Revision 2

    SciTech Connect (OSTI)

    NONE

    1996-11-01T23:59:59.000Z

    The need for ground water monitoring at the Falls City disposal site was evaluated in accordance with NRC regulations and guidelines established by the DOE in Guidance for Implementing the Long-term Surveillance Program for UMTRA Project Title 1 Disposal Sites (DOE, 1996). Based on evaluation of site characterization data, it has been determined that a program to monitor ground water for demonstration of disposal cell performance based on a set of concentration limits is not appropriate because ground water in the uppermost aquifer is of limited use, and a narrative supplemental standard has been applied to the site that does not include numerical concentration limits or a point of compliance. The limited use designation is based on the fact that ground water in the uppermost aquifer is not currently or potentially a source of drinking water in the area because it contains widespread ambient contamination that cannot be cleaned up using methods reasonably employed by public water supply systems. Background ground water quality varies by orders of magnitude since the aquifer is in an area of redistribution of uranium mineralization derived from ore bodies. The DOE plans to perform post-closure ground water monitoring in the uppermost aquifer as a best management practice (BMP) as requested by the state of Texas.

  8. Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    1995-01-01T23:59:59.000Z

    1.1 This test method covers the determination of the energy required to initiate failure in monolithic polycarbonate sheet material under specified conditions of impact using a free falling weight. 1.2 Two specimen types are defined as follows: 1.2.1 Type A consists of a flat plate test specimen and employs a clamped ring support. 1.2.2 Type B consists of a simply supported three-point loaded beam specimen (Fig. 1) and is recommended for use with material which can not be failed using the Type A specimen. For a maximum drop height of 6.096 m (20 ft) and a maximum drop weight of 22.68 kg (50 lb), virgin polycarbonate greater than 12.70 mm (1/2 in.) thick will probably require use of the Type B specimen. Note 1 - See also ASTM Methods: D 1709, D 2444 and D 3029. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of reg...

  9. The Accuracy of Radar Estimates of Ice Terminal Fall Speed from Vertically Pointing Doppler Radar Measurements

    E-Print Network [OSTI]

    Protat, Alain

    The Accuracy of Radar Estimates of Ice Terminal Fall Speed from Vertically Pointing Doppler Radar and 2835 MHz) are used to characterize the terminal fall speed of hydrometeors and the vertical air motion air velocity in ice clouds is small on average, as is assumed in terminal fall speed retrieval methods

  10. Improvements on the accuracy of beam bugs

    SciTech Connect (OSTI)

    Chen, Y.J.; Fessenden, T.

    1998-08-17T23:59:59.000Z

    At LLNL resistive wall monitors are used to measure the current and position used on ETA-II show a droop in signal due to a fast redistribution time constant of the signals. This paper presents the analysis and experimental test of the beam bugs used for beam current and position measurements in and after the fast kicker. It concludes with an outline of present and future changes that can be made to improve the accuracy of these beam bugs. of intense electron beams in electron induction linacs and beam transport lines. These, known locally as ''beam bugs'', have been used throughout linear induction accelerators as essential diagnostics of beam current and location. Recently, the development of a fast beam kicker has required improvement in the accuracy of measuring the position of beams. By picking off signals at more than the usual four positions around the monitor, beam position measurement error can be greatly reduced. A second significant source of error is the mechanical variation of the resistor around the bug.

  11. Analytical calculation of the smear for long-range beam-beam interactions

    E-Print Network [OSTI]

    Kaltchev, D I

    2010-01-01T23:59:59.000Z

    The Lie-algebraic method is used to develop generalized Courant-Snyder invariant in the presence of an arbitrary number of beam-beam collisions, head-on or long-range, in a storage ring collider. The invariant is obtained by concatenating nonlinear beam-beam maps in the horizontal plane and to first order in the beam-beam parameter. Tracking evidence is presented to illustrate that with LHC parameters the invariant is indeed preserved and can be used to predict the smear of horizontal emittance observed in tracking simulations. We discuss the limits of applicability of this model for realistic LHC collision schemes.

  12. Synchrotron radiation damping, intrabeam scattering and beam-beam simulations for HE-LHC

    SciTech Connect (OSTI)

    Valishev, A.; /Fermilab

    2011-03-01T23:59:59.000Z

    The proposed High-Energy LHC project presents an unusual combination of strong synchrotron radiation damping and intrabeam scattering, which is not seen in present-day hadron colliders. The subject of investigation reported in this paper was the simulation of beam-beam effect for the HE-LHC parameters. Parameters of SR and IBS are calculated, and the luminosity evolution is simulated in the absence of beam-beam interaction. Then, a weak-strong numerical simulation is used to predict the effect of beam-beam interaction on particle losses and emittance evolution.

  13. ENG ME 404: Dynamics and control Fall 2011 ENG ME 404: Dynamics and Control of Mechanical Systems, Fall 2011

    E-Print Network [OSTI]

    Systems and control theory plays a vital role across most aspects of modern life. Control systemsENG ME 404: Dynamics and control Fall 2011 ENG ME 404: Dynamics and Control of Mechanical Systems and provide you a set of tools to analyze and design controllers. Elements of both state-space (modern

  14. ENG ME 404: Dynamics and control Fall 2014 ENG ME 404: Dynamics and Control of Mechanical Systems, Fall 2014

    E-Print Network [OSTI]

    Lin, Xi

    and control theory plays a vital role across most aspects of modern life. Control systems are found in yourENG ME 404: Dynamics and control Fall 2014 ENG ME 404: Dynamics and Control of Mechanical Systems a set of tools to analyze and design controllers. Elements of both state-space (modern) and frequency

  15. Proton beam therapy control system

    DOE Patents [OSTI]

    Baumann, Michael A; Beloussov, Alexandre V; Bakir, Julide; Armon, Deganit; Olsen, Howard B; Salem, Dana

    2013-12-03T23:59:59.000Z

    A tiered communications architecture for managing network traffic in a distributed system. Communication between client or control computers and a plurality of hardware devices is administered by agent and monitor devices whose activities are coordinated to reduce the number of open channels or sockets. The communications architecture also improves the transparency and scalability of the distributed system by reducing network mapping dependence. The architecture is desirably implemented in a proton beam therapy system to provide flexible security policies which improve patent safety and facilitate system maintenance and development.

  16. Proton beam therapy control system

    DOE Patents [OSTI]

    Baumann, Michael A; Beloussov, Alexandre V; Bakir, Julide; Armon, Deganit; Olsen, Howard B; Salem, Dana

    2013-06-25T23:59:59.000Z

    A tiered communications architecture for managing network traffic in a distributed system. Communication between client or control computers and a plurality of hardware devices is administered by agent and monitor devices whose activities are coordinated to reduce the number of open channels or sockets. The communications architecture also improves the transparency and scalability of the distributed system by reducing network mapping dependence. The architecture is desirably implemented in a proton beam therapy system to provide flexible security policies which improve patent safety and facilitate system maintenance and development.

  17. Protective laser beam viewing device

    DOE Patents [OSTI]

    Neil, George R.; Jordan, Kevin Carl

    2012-12-18T23:59:59.000Z

    A protective laser beam viewing system or device including a camera selectively sensitive to laser light wavelengths and a viewing screen receiving images from the laser sensitive camera. According to a preferred embodiment of the invention, the camera is worn on the head of the user or incorporated into a goggle-type viewing display so that it is always aimed at the area of viewing interest to the user and the viewing screen is incorporated into a video display worn as goggles over the eyes of the user.

  18. Proton beam therapy control system

    DOE Patents [OSTI]

    Baumann, Michael A. (Riverside, CA); Beloussov, Alexandre V. (Bernardino, CA); Bakir, Julide (Alta Loma, CA); Armon, Deganit (Redlands, CA); Olsen, Howard B. (Colton, CA); Salem, Dana (Riverside, CA)

    2008-07-08T23:59:59.000Z

    A tiered communications architecture for managing network traffic in a distributed system. Communication between client or control computers and a plurality of hardware devices is administered by agent and monitor devices whose activities are coordinated to reduce the number of open channels or sockets. The communications architecture also improves the transparency and scalability of the distributed system by reducing network mapping dependence. The architecture is desirably implemented in a proton beam therapy system to provide flexible security policies which improve patent safety and facilitate system maintenance and development.

  19. Proton beam therapy control system

    DOE Patents [OSTI]

    Baumann, Michael A. (Riverside, CA); Beloussov, Alexandre V. (San Bernardino, CA); Bakir, Julide (Alta Loma, CA); Armon, Deganit (Longmeadow, MA); Olsen, Howard B. (Irvine, CA); Salem, Dana (Riverside, CA)

    2010-09-21T23:59:59.000Z

    A tiered communications architecture for managing network traffic in a distributed system. Communication between client or control computers and a plurality of hardware devices is administered by agent and monitor devices whose activities are coordinated to reduce the number of open channels or sockets. The communications architecture also improves the transparency and scalability of the distributed system by reducing network mapping dependence. The architecture is desirably implemented in a proton beam therapy system to provide flexible security policies which improve patent safety and facilitate system maintenance and development.

  20. Nuclear astrophysics and electron beams

    SciTech Connect (OSTI)

    Schwenk, A. [Institut für Kernphysik, Technische Universität Darmstadt, 64289 Darmstadt, Germany and ExtreMe Matter Institute EMMI, GSI Helmholtzzentrum für Schwerionenforschung GmbH, 64291 Darmstadt (Germany)

    2013-11-07T23:59:59.000Z

    Electron beams provide important probes and constraints for nuclear astrophysics. This is especially exciting at energies within the regime of chiral effective field theory (EFT), which provides a systematic expansion for nuclear forces and electroweak operators based on quantum chromodynamics. This talk discusses some recent highlights and future directions based on chiral EFT, including nuclear structure and reactions for astrophysics, the neutron skin and constraints for the properties of neutron-rich matter in neutron stars and core-collapse supernovae, and the dark matter response of nuclei.

  1. SPEAR3 Beam Line Availability

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's PossibleRadiation Protection245C Unlimited ReleaseWelcome ton n u a l r e p o rMarch 21,SPEAR3Beam

  2. Radiation beam calorimetric power measurement system

    DOE Patents [OSTI]

    Baker, John (Livermore, CA); Collins, Leland F. (Pleasanton, CA); Kuklo, Thomas C. (Ripon, CA); Micali, James V. (Dublin, CA)

    1992-01-01T23:59:59.000Z

    A radiation beam calorimetric power measurement system for measuring the average power of a beam such as a laser beam, including a calorimeter configured to operate over a wide range of coolant flow rates and being cooled by continuously flowing coolant for absorbing light from a laser beam to convert the laser beam energy into heat. The system further includes a flow meter for measuring the coolant flow in the calorimeter and a pair of thermistors for measuring the temperature difference between the coolant inputs and outputs to the calorimeter. The system also includes a microprocessor for processing the measured coolant flow rate and the measured temperature difference to determine the average power of the laser beam.

  3. Focused electron and ion beam systems

    DOE Patents [OSTI]

    Leung, Ka-Ngo; Reijonen, Jani; Persaud, Arun; Ji, Qing; Jiang, Ximan

    2004-07-27T23:59:59.000Z

    An electron beam system is based on a plasma generator in a plasma ion source with an accelerator column. The electrons are extracted from a plasma cathode in a plasma ion source, e.g. a multicusp plasma ion source. The beam can be scanned in both the x and y directions, and the system can be operated with multiple beamlets. A compact focused ion or electron beam system has a plasma ion source and an all-electrostatic beam acceleration and focusing column. The ion source is a small chamber with the plasma produced by radio-frequency (RF) induction discharge. The RF antenna is wound outside the chamber and connected to an RF supply. Ions or electrons can be extracted from the source. A multi-beam system has several sources of different species and an electron beam source.

  4. Virtual mask digital electron beam lithography

    DOE Patents [OSTI]

    Baylor, Larry R. (Farragut, TN); Thomas, Clarence E. (Knoxville, TN); Voelkl, Edgar (Oak Ridge, TN); Moore, James A. (Powell, TN); Simpson, Michael L. (Knoxville, TN); Paulus, Michael J. (Knoxville, TN)

    1999-01-01T23:59:59.000Z

    Systems and methods for direct-to-digital holography are described. An apparatus includes a laser; a beamsplitter optically coupled to the laser; a reference beam mirror optically coupled to the beamsplitter; an object optically coupled to the beamsplitter, a focusing lens optically coupled to both the reference beam mirror and the object; and a digital recorder optically coupled to the focusing lens. A reference beam is incident upon the reference beam mirror at a non-normal angle, and the reference beam and an object beam are focused by the focusing lens at a focal plane of the digital recorder to form an image. The systems and methods provide advantages in that computer assisted holographic measurements can be made.

  5. Rippled beam free electron laser amplifier

    DOE Patents [OSTI]

    Carlsten, Bruce E. (Los Alamos, NM)

    1999-01-01T23:59:59.000Z

    A free electron laser amplifier provides a scalloping annular electron beam that interacts with the axial electric field of a TM.sub.0n mode. A waveguide defines an axial centerline and, a solenoid arranged about the waveguide produces an axial constant magnetic field within the waveguide. An electron beam source outputs a annular electron beam that interacts with the axial magnetic field to have an equilibrium radius and a ripple radius component having a variable radius with a ripple period along the axial centerline. An rf source outputs an axial electric field that propagates within the waveguide coaxial with the electron beam and has a radial mode that interacts at the electron beam at the equilibrium radius component of the electron beam.

  6. Interfacial Properties of Electron Beam Cured Composites

    SciTech Connect (OSTI)

    Eberle, C.C.

    1999-12-30T23:59:59.000Z

    The objectives of the CRADA are to: Confirm that fiber-resin adhesion is responsible for the observed poor shear properties; Determine the mechanism(s) responsible for poor adhesion between carbon fibers and epoxy resins after e-beam curing; Develop and evaluate resin systems and fiber treatments to improve the properties of e-beam cured, carbon-fiber-reinforced composites; and Develop refined methods for processing e-beam cured, carbon-fiber-reinforced composites.

  7. High power, high beam quality regenerative amplifier

    DOE Patents [OSTI]

    Hackel, Lloyd A. (Livermore, CA); Dane, Clifford B. (Livermore, CA)

    1993-01-01T23:59:59.000Z

    A regenerative laser amplifier system generates high peak power and high energy per pulse output beams enabling generation of X-rays used in X-ray lithography for manufacturing integrated circuits. The laser amplifier includes a ring shaped optical path with a limited number of components including a polarizer, a passive 90 degree phase rotator, a plurality of mirrors, a relay telescope, and a gain medium, the components being placed close to the image plane of the relay telescope to reduce diffraction or phase perturbations in order to limit high peak intensity spiking. In the ring, the beam makes two passes through the gain medium for each transit of the optical path to increase the amplifier gain to loss ratio. A beam input into the ring makes two passes around the ring, is diverted into an SBS phase conjugator and proceeds out of the SBS phase conjugator back through the ring in an equal but opposite direction for two passes, further reducing phase perturbations. A master oscillator inputs the beam through an isolation cell (Faraday or Pockels) which transmits the beam into the ring without polarization rotation. The isolation cell rotates polarization only in beams proceeding out of the ring to direct the beams out of the amplifier. The diffraction limited quality of the input beam is preserved in the amplifier so that a high power output beam having nearly the same diffraction limited quality is produced.

  8. Beam Characterization at the Neutron Radiography Facility

    SciTech Connect (OSTI)

    Sarah Morgan; Jeffrey King

    2013-01-01T23:59:59.000Z

    The quality of a neutron imaging beam directly impacts the quality of radiographic images produced using that beam. Fully characterizing a neutron beam, including determination of the beam’s effective length-to-diameter ratio, neutron flux profile, energy spectrum, image quality, and beam divergence, is vital for producing quality radiographic images. This project characterized the east neutron imaging beamline at the Idaho National Laboratory Neutron Radiography Reactor (NRAD). The experiments which measured the beam’s effective length-to-diameter ratio and image quality are based on American Society for Testing and Materials (ASTM) standards. An analysis of the image produced by a calibrated phantom measured the beam divergence. The energy spectrum measurements consist of a series of foil irradiations using a selection of activation foils, compared to the results produced by a Monte Carlo n-Particle (MCNP) model of the beamline. Improvement of the existing NRAD MCNP beamline model includes validation of the model’s energy spectrum and the development of enhanced image simulation methods. The image simulation methods predict the radiographic image of an object based on the foil reaction rate data obtained by placing a model of the object in front of the image plane in an MCNP beamline model.

  9. High power, high beam quality regenerative amplifier

    DOE Patents [OSTI]

    Hackel, L.A.; Dane, C.B.

    1993-08-24T23:59:59.000Z

    A regenerative laser amplifier system generates high peak power and high energy per pulse output beams enabling generation of X-rays used in X-ray lithography for manufacturing integrated circuits. The laser amplifier includes a ring shaped optical path with a limited number of components including a polarizer, a passive 90 degree phase rotator, a plurality of mirrors, a relay telescope, and a gain medium, the components being placed close to the image plane of the relay telescope to reduce diffraction or phase perturbations in order to limit high peak intensity spiking. In the ring, the beam makes two passes through the gain medium for each transit of the optical path to increase the amplifier gain to loss ratio. A beam input into the ring makes two passes around the ring, is diverted into an SBS phase conjugator and proceeds out of the SBS phase conjugator back through the ring in an equal but opposite direction for two passes, further reducing phase perturbations. A master oscillator inputs the beam through an isolation cell (Faraday or Pockels) which transmits the beam into the ring without polarization rotation. The isolation cell rotates polarization only in beams proceeding out of the ring to direct the beams out of the amplifier. The diffraction limited quality of the input beam is preserved in the amplifier so that a high power output beam having nearly the same diffraction limited quality is produced.

  10. Effect of Diffusion on Bunched Beam Echo

    SciTech Connect (OSTI)

    Stupakov, G.V.; Chao, A.W.; /SLAC

    2011-09-01T23:59:59.000Z

    When a beam receives a dipole kick, its centroid signal decoheres due to the betatron tune spread in the beam. Long after the signal has decohered, however, a followup quadrupole kick to the beam brings a pronounced echo back to the centroid signal. This echo effect has been analyzed for the case of a bunched beam in Ref. [1]. In this work, the perturbation calculation of Ref. [1] is extended to include a diffusion in betatron amplitude. The effect of diffusion on the magnitude of the echo is then parameterized and studied.

  11. Focused ion beam source method and apparatus

    DOE Patents [OSTI]

    Pellin, Michael J. (Naperville, IL); Lykke, Keith R. (Gaithersburg, MD); Lill, Thorsten B. (Sunnyvale, CA)

    2000-01-01T23:59:59.000Z

    A focused ion beam having a cross section of submicron diameter, a high ion current, and a narrow energy range is generated from a target comprised of particle source material by laser ablation. The method involves directing a laser beam having a cross section of critical diameter onto the target, producing a cloud of laser ablated particles having unique characteristics, and extracting and focusing a charged particle beam from the laser ablated cloud. The method is especially suited for producing focused ion beams for semiconductor device analysis and modification.

  12. Improvement of Ion-Beam Energy Resolution in a Solenoid-based Radioactive Nuclear Beam Facility

    E-Print Network [OSTI]

    Becchetti, Fred

    Improvement of Ion-Beam Energy Resolution in a Solenoid-based Radioactive Nuclear Beam Facility of Philosophy (Nuclear Engineering and Radiological Sciences) in The University of Michigan 2010 Doctoral

  13. The beam diagnostic instruments in Beijing radioactive ion-beam facilities isotope separator on-line

    SciTech Connect (OSTI)

    Ma, Y., E-mail: yjma@ciae.ac.cn; Cui, B.; Ma, R.; Tang, B.; Chen, L.; Huang, Q.; Jiang, W. [China Institute of Atomic Energy, Beijing 102413 (China)] [China Institute of Atomic Energy, Beijing 102413 (China)

    2014-02-15T23:59:59.000Z

    The beam diagnostic instruments for Beijing Radioactive Ion-beam Facilities Isotope Separator On-Line are introduced [B. Q. Cui, Z. H. Peng, Y. J. Ma, R. G. Ma, B. Tang, T. Zhang, and W. S. Jiang, Nucl. Instrum. Methods 266, 4113 (2008); T. J. Zhang, X. L. Guan, and B. Q. Cui, in Proceedings of APAC 2004, Gyeongju, Korea, 2004, http://www.jacow.org , p. 267]. For low intensity ion beam [30–300 keV/1 pA–10 ?A], the beam profile monitor, the emittance measurement unit, and the analyzing slit will be installed. For the primary proton beam [100 MeV/200 ?A], the beam profile scanner will be installed. For identification of the nuclide, a beam identification unit will be installed. The details of prototype of the beam diagnostic units and some experiment results will be described in this article.

  14. Method and apparatus for laser-controlled proton beam radiology

    DOE Patents [OSTI]

    Johnstone, Carol J. (Warrenville, IL)

    1998-01-01T23:59:59.000Z

    A proton beam radiology system provides cancer treatment and proton radiography. The system includes an accelerator for producing an H.sup.- beam and a laser source for generating a laser beam. A photodetachment module is located proximate the periphery of the accelerator. The photodetachment module combines the H.sup.- beam and laser beam to produce a neutral beam therefrom within a subsection of the H.sup.- beam. The photodetachment module emits the neutral beam along a trajectory defined by the laser beam. The photodetachment module includes a stripping foil which forms a proton beam from the neutral beam. The proton beam is delivered to a conveyance segment which transports the proton beam to a patient treatment station. The photodetachment module further includes a laser scanner which moves the laser beam along a path transverse to the cross-section of the H.sup.- beam in order to form the neutral beam in subsections of the H.sup.- beam. As the scanning laser moves across the H.sup.- beam, it similarly varies the trajectory of the proton beam emitted from the photodetachment module and in turn varies the target location of the proton beam upon the patient. Intensity modulation of the proton beam can also be achieved by controlling the output of the laser.

  15. Method and apparatus for laser-controlled proton beam radiology

    DOE Patents [OSTI]

    Johnstone, C.J.

    1998-06-02T23:59:59.000Z

    A proton beam radiology system provides cancer treatment and proton radiography. The system includes an accelerator for producing an H{sup {minus}} beam and a laser source for generating a laser beam. A photodetachment module is located proximate the periphery of the accelerator. The photodetachment module combines the H{sup {minus}} beam and laser beam to produce a neutral beam therefrom within a subsection of the H{sup {minus}} beam. The photodetachment module emits the neutral beam along a trajectory defined by the laser beam. The photodetachment module includes a stripping foil which forms a proton beam from the neutral beam. The proton beam is delivered to a conveyance segment which transports the proton beam to a patient treatment station. The photodetachment module further includes a laser scanner which moves the laser beam along a path transverse to the cross-section of the H{sup {minus}} beam in order to form the neutral beam in subsections of the H{sup {minus}} beam. As the scanning laser moves across the H{sup {minus}} beam, it similarly varies the trajectory of the proton beam emitted from the photodetachment module and in turn varies the target location of the proton beam upon the patient. Intensity modulation of the proton beam can also be achieved by controlling the output of the laser. 9 figs.

  16. Upgrade of the Minos+ Experiment Data Acquisition for the High Energy NuMI Beam Run

    E-Print Network [OSTI]

    Badgett, William; Torretta, Donatella; Meier, Jerry; Gunderson, Jeffrey; Osterholm, Denise; Saranen, David

    2015-01-01T23:59:59.000Z

    The Minos+ experiment is an extension of the Minos experiment at a higher energy and more intense neutrino beam, with the data collection having begun in the fall of 2013. The neutrino beam is provided by the Neutrinos from the Main Injector (NuMI) beam-line at Fermi National Accelerator Laboratory (Fermilab). The detector apparatus consists of two main detectors, one underground at Fermilab and the other in Soudan, Minnesota with the purpose of studying neutrino oscillations at a base line of 735 km. The original data acquisition system has been running for several years collecting data from NuMI, but with the extended run from 2013, parts of the system needed to be replaced due to obsolescence, reliability problems, and data throughput limitations. Specifically, we have replaced the front-end readout controllers, event builder, and data acquisition computing and trigger processing farms with modern, modular and reliable devices with few single points of failure. The new system is based on gigabit Ethernet T...

  17. Studies on beam propagation pertaining to beamed microwave power transmission and open resonator quasi-optics

    E-Print Network [OSTI]

    McCleary, James Carlton

    1991-01-01T23:59:59.000Z

    on the space shuttle. A near-field program is used to compare the collection efficiencies obtainable with a parabolic dish and a resonant Gaussian beam antenna. The second application of the computer programs is the analysis of a reference system for beaming... characteristics of the maximum tapers in Table 4. . 81 45 Collection efficiency characteristics of the high efficiency tapers. 84 46 Proposed shuttle beamed power demonstration using an 8 ft. parabolic dish as the transmitter antenna. 89 47 Gaussian beam...

  18. Lattice design for head-on beam-beam compensation at RHIC

    SciTech Connect (OSTI)

    Montag, C.

    2011-03-28T23:59:59.000Z

    Electron lenses for head-on beam-beam compensation will be installed in IP 10 at RHIC. Compensation of the beam-beam effect experienced at IP 8 requires betatron phase advances of {Delta}{psi} = k {center_dot} {pi} between the proton-proton interaction point at IP 8, and the electron lens at IP 10. This paper describes the lattice solutions for both the BLUE and the YELLOW ring to achieve this goal.

  19. Method and apparatus for reading free falling dosimeter punchcodes

    DOE Patents [OSTI]

    Langsted, James M. (Golden, CO)

    1992-12-22T23:59:59.000Z

    A punchcode reader is provided for reading data encoded in a punchcode hole array on a dosimeter. The dosimeter falls through a passage in the reader containing photosensor detectors disposed along the passage which provide output signals to a microprocessor. The signals are processed to determine the orientation of the dosimeter in the reader, the location and state of punchcode holes in a two row array thereby decoding the encoded data. Multiple rate of fall calculations are made, and if appropriate matching of the punchcode array is not obtained in three tries, an error signal is outputted to the operator. The punchcode reader also provides for storage of data from multiple dosimeters passed through the reader, and for the output of decoded data to an external display or a computer for further processing.

  20. Method and apparatus for reading free falling dosimeter punchcodes

    DOE Patents [OSTI]

    Langsted, J.M.

    1992-12-22T23:59:59.000Z

    A punchcode reader is provided for reading data encoded in a punchcode hole array on a dosimeter. The dosimeter falls through a passage in the reader containing photosensor detectors disposed along the passage which provide output signals to a microprocessor. The signals are processed to determine the orientation of the dosimeter in the reader, the location and state of punchcode holes in a two row array thereby decoding the encoded data. Multiple rate of fall calculations are made, and if appropriate matching of the punchcode array is not obtained in three tries, an error signal is output to the operator. The punchcode reader also provides for storage of data from multiple dosimeters passed through the reader, and for the output of decoded data to an external display or a computer for further processing. 8 figs.

  1. Free falling and rising of spherical and angular particles

    SciTech Connect (OSTI)

    Rahmani, M., E-mail: mona.rahmani@ifpen.fr; Wachs, A., E-mail: anthony.wachs@ifpen.fr [Fluid Mechanics Department, IFP Energies nouvelles, Etablissement de Lyon, 69360 Solaize (France)

    2014-08-15T23:59:59.000Z

    Direct numerical simulations of freely falling and rising particles in an infinitely long domain, with periodic lateral boundary conditions, are performed. The focus is on characterizing the free motion of cubical and tetrahedral particles for different Reynolds numbers, as an extension to the well-studied behaviour of freely falling and rising spherical bodies. The vortical structure of the wake, dynamics of particle movement, and the interaction of the particle with its wake are studied. The results reveal mechanisms of path instabilities for angular particles, which are different from those for spherical ones. The rotation of the particle plays a more significant role in the transition to chaos for angular particles. Following a framework similar to that of Mougin and Magnaudet [“Wake-induced forces and torques on a zigzagging/spiralling bubble,” J. Fluid Mech. 567, 185–194 (2006)], the balance of forces and torques acting on particles is discussed to gain more insight into the path instabilities of angular particles.

  2. Cascaded injection resonator for coherent beam combining of laser arrays

    DOE Patents [OSTI]

    Kireev, Vassili [Sunnyvale, CA; Liu, Yun; Protopopescu, Vladimir [Knoxville, TN; Braiman, Yehuda [Oak Ridge, TN

    2008-10-21T23:59:59.000Z

    The invention provides a cascaded injection resonator for coherent beam combining of laser arrays. The resonator comprises a plurality of laser emitters arranged along at least one plane and a beam sampler for reflecting at least a portion of each laser beam that impinges on the beam sampler, the portion of each laser beam from one of the laser emitters being reflected back to another one of the laser emitters to cause a beam to be generated from the other one of the laser emitters to the beam reflector. The beam sampler also transmits a portion of each laser beam to produce a laser output beam such that a plurality of laser output beams of the same frequency are produced. An injection laser beam is directed to a first laser emitter to begin a process of generating and reflecting a laser beam from one laser emitter to another laser emitter in the plurality. A method of practicing the invention is also disclosed.

  3. Optical remote diagnostics of atmospheric propagating beams of ionizing radiation

    DOE Patents [OSTI]

    Karl, Jr., Robert R. (Los Alamos, NM)

    1990-01-01T23:59:59.000Z

    Data is obtained for use in diagnosing the characteristics of a beam of ionizing radiation, such as charged particle beams, neutral particle beams, and gamma ray beams. In one embodiment the beam is emitted through the atmosphere and produces nitrogen fluorescence during passage through air. The nitrogen fluorescence is detected along the beam path to provide an intensity from which various beam characteristics can be calculated from known tabulations. Optical detecting equipment is preferably located orthogonal to the beam path at a distance effective to include the entire beam path in the equipment field of view.

  4. LBNL/ Adopt Fall Protection Program 2010 Here is the Company Letter Certification Template to address if your company has

    E-Print Network [OSTI]

    Eisen, Michael

    LBNL/ Adopt Fall Protection Program 2010 Here is the Company Letter Certification Template to address if your company has decided to work under LBNL fall protection program. See attached Chapter 30 protection matrix. All fall protection equipment will be inspected before work begins by LBNL SME of fall

  5. EA-1894: Albeni Falls Flexible Winter Lake Operations, Bonner, Idaho

    Broader source: Energy.gov [DOE]

    DOE’s Bonneville Power Administration and the U.S. Army Corps of Engineers, as co-lead Federal agencies, prepared this EA to evaluate the potential environmental impacts of a proposal to operate Albeni Falls dam during the winter months (approximately December 15th to March 31st) and determine whether the existing Columbia River System Operation Review EIS (DOE/EIS-0170) is adequate or a supplemental or new EIS is required.

  6. EIS-0156: Cowlitz Falls Final Environmental Impact Statement

    Broader source: Energy.gov [DOE]

    The Federal Energy Regulatory Commission prepared this statement to assess the environmental impacts of constructing and operating a proposed 70-megawatt hydroelectric dam and electrical infrastructure on the Cowlitz River near Morton and Randle, Washington. The U.S. Department of Energy's Bonneville Power Administration adopted this statement on 12/6/1990 to fulfil its National Environmental Policy Act requirement for its proposed action to acquire the power output from the Cowlitz Falls Hydroelectric Project.

  7. Energy and Society Fall 2013 Problem Set 1

    E-Print Network [OSTI]

    Kammen, Daniel M.

    the temperature and pressure, if known.) (3 points) g. How many square meters of solar panels (assume that the panels are placed in the Southwest in an area with an annual average solar radiation of 6.5 kWh/m2 /day, and that the solar panels have a conversion efficiency of 15%) (3 points) h. How many gallons of water that fall

  8. Page 1 of 8 CHEMISTRY 3311, Fall 2001

    E-Print Network [OSTI]

    Walba, David

    Name: Page 1 of 8 CHEMISTRY 3311, Fall 2001 Professor Walba Third Hour Exam November 15, 2001-book "open model" exam. You may use models, but no notes or books. Please put all your answers on the test. Use the backs of the pages for scratch. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6

  9. Advanced Calculus I (Math 309) Fall 2002 Lecture Notes

    E-Print Network [OSTI]

    Bohner, Martin

    is invertible iff there exists a function g : Y X with (f g)(y) = y y Y and (g f)(x) = x x X, and then gAdvanced Calculus I (Math 309) Fall 2002 Lecture Notes Martin Bohner Version from December 11, 2002. Preliminaries 1 0.1. Sets 1 0.2. Functions 1 0.3. Proofs 2 Chapter 1. The Real Number System 3 1.1. The Field

  10. Advanced Calculus I (Math 309) Fall 2003 Lecture Notes

    E-Print Network [OSTI]

    Bohner, Martin

    function of f and g. Proposition 0.9. A function f : X Y is invertible iff there exists a function g : YAdvanced Calculus I (Math 309) Fall 2003 Lecture Notes Martin Bohner Version from December 3, 2003. Preliminaries 1 0.1. Sets 1 0.2. Functions 1 0.3. Proofs 2 Chapter 1. The Real Number System 3 1.1. The Field

  11. MATH 2920: Fall 2013 Second-Half Review Topics

    E-Print Network [OSTI]

    Swigon, David

    MATH 2920: Fall 2013 Second-Half Review Topics Chapters: 7.1-7.3, 8.1-8.2, 9.1-9.3 Theory: Behavior Bendixson theorems (7.13, 7.16) and corollary (7.17) Definition and properties of )(X (Theorem 8.3) Definition and properties of stable and unstable sets )( W Definition and properties of an attracting set

  12. Polarization of fast particle beams by collisional pumping

    DOE Patents [OSTI]

    Stearns, J. Warren (Castro Valley, CA); Kaplan, Selig N. (El Cerrito, CA); Pyle, Robert V. (Berkeley, CA); Anderson, L. Wilmer (Madison, WI); Ruby, Lawrence (Berkeley, CA); Schlachter, Alfred S. (Oakland, CA)

    1988-01-01T23:59:59.000Z

    Method and apparatus for highly polarizing a fast beam of particles by collisional pumping, including generating a fast beam of particles, and also generating a thick electron-spin-polarized medium positioned as a target for the beam. The target is made sufficiently thick to allow the beam to interact with the medium to produce collisional pumping whereby the beam becomes highly polarized.

  13. Geophysical test of the universality of free-fall

    E-Print Network [OSTI]

    Sachie Shiomi

    2008-11-24T23:59:59.000Z

    We point out that the universality of free-fall can be tested by observing surface-gravity changes of the Earth. The Earth's inner core is weakly coupled to the rest part of the Earth by mainly gravitational forces. If there were a violation of the universality of free-fall, because of their different chemical compositions and/or of different mass fractions of binding energies, the inner core and the rest part of the Earth would fall at different rates towards the Sun and other sources of gravitational fields. The differential acceleration could be observed as surface-gravity effects. By assuming a simple Earth model, we discuss the expected surface-gravity effects of violations of the universality and experiments to search for such effects by using superconducting gravimeters. It is shown that the universality can be tested to a level of 10$^{-9}$ using currently operating superconducting gravimeters. Some improvements can be expected from combinations of global measurements and applications of advanced data analyses.

  14. Photovoltaic Potential and Insolation Maps (Canada) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRoseConcernsCompanyPCNInformationLumileds

  15. LCDETxxxxxxx Improved TESLA Optics and Beam Induced

    E-Print Network [OSTI]

    LC­DET­xxxx­xxx Improved TESLA Optics and Beam Induced Backgrounds Update Karsten BË?uÃ?er, DESY and Olivier Napoly, CEA/Saclay LCWS 2002, Jeju, Korea Abstract A new tesla optics with l*=5m is under development. An update is given on the simulation of the beam induced backgrounds in the TESLA detector. 1

  16. Fast Beam-Based BPM Calibration

    SciTech Connect (OSTI)

    Bertsche, K.; Loos, H.; Nuhn, H.-D.; Peters, F.; /SLAC

    2012-10-15T23:59:59.000Z

    The Alignment Diagnostic System (ADS) of the LCLS undulator system indicates that the 33 undulator quadrupoles have extremely high position stability over many weeks. However, beam trajectory straightness and lasing efficiency degrade more quickly than this. A lengthy Beam Based Alignment (BBA) procedure must be executed every two to four weeks to re-optimize the X-ray beam parameters. The undulator system includes RF cavity Beam Position Monitors (RFBPMs), several of which are utilized by an automatic feedback system to align the incoming electron-beam trajectory to the undulator axis. The beam trajectory straightness degradation has been traced to electronic drifts of the gain and offset of the BPMs used in the beam feedback system. To quickly recover the trajectory straightness, we have developed a fast beam-based procedure to recalibrate the BPMs. This procedure takes advantage of the high-precision monitoring capability of the ADS, which allows highly repeatable positioning of undulator quadrupoles. This report describes the ADS, the position stability of the LCLS undulator quadrupoles, and some results of the new recovery procedure.

  17. High-energy electron beam technology

    SciTech Connect (OSTI)

    Danko, J.C.; Lundin, C.D. (Univ. of Tennessee, Knoxville, TN (United States)); Nolting, E.E. (Naval Surface Warfare Center, White Oak, MD (United States))

    1994-09-01T23:59:59.000Z

    A high-energy electron beam (HEEB) technology was developed under the US Department of Defense (DOD) charged-particle-beam (CPB) directed-energy program. The program's objective was advanced military weapon systems. For the past two decades, charged-particle-beam research focused on producing intense beams and the vehicles to deliver large amounts of electrical energy. The charged-particle beams of interest for weapon systems had particle energies up to 100 MeV, beam currents of tens of kiloamperes, and propagation distances in excess of 100 m. However, such high energy levels are not required for industrial uses of the technology. It is anticipated that these less-aggressive beams will provide an electrical heat source suitable for a variety of materials processing applications, including surface treatment, joining, shock hardening, phase-transformation hardening, peening, shock-wave compaction, and melting. Much more R and D is needed to transfer to industry the high-energy electron beam technology developed in the CPB program. For example, its power as a materials processing tool must be convincingly demonstrated. Also required are compact, reliable accelerators that are relatively simple to use and reasonably priced.

  18. Polymer surface treatment with particle beams

    DOE Patents [OSTI]

    Stinnett, R.W.; VanDevender, J.P.

    1999-05-04T23:59:59.000Z

    A polymer surface and near surface treatment process produced by irradiation with high energy particle beams is disclosed. The process is preferably implemented with pulsed ion beams. The process alters the chemical and mechanical properties of the polymer surface in a manner useful for a wide range of commercial applications. 16 figs.

  19. Emittance growth from electron beam modulation

    SciTech Connect (OSTI)

    Blaskiewicz, M.

    2009-12-01T23:59:59.000Z

    In linac ring colliders like MeRHIC and eRHIC a modulation of the electron bunch can lead to a modulation of the beam beam tune shift and steering errors. These modulations can lead to emittance growth. This note presents simple formulas to estimate these effects which generalize some previous results.

  20. Policy Issues for Retail Beamed Power Transmission

    E-Print Network [OSTI]

    solar electric power using retail delivery of beamed power. Recent advances in power beaming have made to enable widespread adoption of this clean and sustainable contribution to meeting energy needs. It is seen to micro-renewable energy resource exploitation since wired power transmission is only cost effective over

  1. Stability design of long precast concrete beams

    E-Print Network [OSTI]

    Burgoyne, Chris

    lateral de¯ection measured in the minor- axis direction (which rotates with y) v0 initial lateral imperfection w self-weight of beam per unit length wcr critical self-weight of beam to cause buckling, per unit length y lateral de¯ection measured along a ®xed axis y0 initial lateral imperfection yb distance

  2. Student Leadership Institute (SLI) Participant Statistics from Fall 2008 to Fall 2011 Leadership and Multicultural Development Programs, Dean of Students Office

    E-Print Network [OSTI]

    de Lijser, Peter

    Student Leadership Institute (SLI) Participant Statistics from Fall 2008 to Fall 2011 Leadership.45% N/A Other 0 % N/A N/A 6.28% N/A Number of Students Participating in the Student Leadership Institute students actively participated in one or more core workshops. #12;Student Leadership Institute Certificates

  3. 2004 Fall GTAC Review:2004 Fall GTAC Review: A Monolithic, SelfA Monolithic, Self--Powered SystemPowered System--

    E-Print Network [OSTI]

    Rincon-Mora, Gabriel A.

    2004 Fall GTAC Review:2004 Fall GTAC Review: A Monolithic, SelfA Monolithic, Self--Powered System Battery integration in a single chip Goal l Implementation of a monolithic, self-powered SOC, where Involving curve fitting of a bundle of measurement GEDC Industry Advisory Board, October 2004. © 2004

  4. GPU-optimized Code for Long-term Simulations of Beam-beam Effects in Colliders

    SciTech Connect (OSTI)

    Roblin, Yves [JLAB; Morozov, Vasiliy [JLAB; Terzic, Balsa [JLAB; Aturban, Mohamed A. [Old Dominion University; Ranjan, D. [Old Dominion University; Zubair, Mohammed [Old Dominion University

    2013-06-01T23:59:59.000Z

    We report on the development of the new code for long-term simulation of beam-beam effects in particle colliders. The underlying physical model relies on a matrix-based arbitrary-order symplectic particle tracking for beam transport and the Bassetti-Erskine approximation for beam-beam interaction. The computations are accelerated through a parallel implementation on a hybrid GPU/CPU platform. With the new code, a previously computationally prohibitive long-term simulations become tractable. We use the new code to model the proposed medium-energy electron-ion collider (MEIC) at Jefferson Lab.

  5. SPALLATION NEUTRON SOURCE BEAM CURRENT MONITOR ELECTRONICS.

    SciTech Connect (OSTI)

    KESSELMAN, M.

    2001-06-18T23:59:59.000Z

    The Spallation Neutron Source (SNS) to be constructed at ORNL is a collaboration of six laboratories. Beam current monitors for SNS will be used to monitor H-minus and H-plus beams ranging from the 15 mA (tune-up in the Front End and Linac) to over 60 A fully accumulated in the Ring. The time structure of the beams to be measured range from 645 nsec ''mini'' bunches, at the 1.05 MHz ring revolution rate, to an overall 1 mS long macro pulse. Beam current monitors (BCMs) for SNS have requirements depending upon their location within the system. The development of a general approach to satisfy requirements of various locations with common components is a major design objective. This paper will describe the development of the beam current monitors and electronics.

  6. Carbon Fiber Damage in Particle Beam

    E-Print Network [OSTI]

    Dehning, B; Kroyer, T; Meyer, M; Sapinski, M

    2011-01-01T23:59:59.000Z

    Carbon fibers are commonly used as moving targets in beam wire scanners. The heating of the fiber due to energy loss of the particles travelling through is simulated with Geant4. The heating induced by the beam electromagnetic field is estimated with ANSYS. The heat transfer and sublimation processes are modelled. Due to the model nonlinearity, a numerical approach based on discretization of the wire movement is used to solve it for particular beams. Radiation damage to the fiber is estimated with SRIM. The model is tested with available SPS and LEP data and a dedicated damage test on the SPS beam is performed followed by a post-mortem analysis of the wire remnants. Predictions for the LHC beams are made.

  7. Beam Loss Studies for the 2-MW LBNE Proton Beam Line

    SciTech Connect (OSTI)

    Drozhdin, A.I.; Childress, S.R.; Mokhov, N.V.; Tropin, I.S.; Zwaska, R.; /Fermilab

    2012-05-01T23:59:59.000Z

    Severe limits are put on allowable beam loss during extraction and transport of a 2.3 MW primary proton beam for the Long Baseline Neutrino Experiment (LBNE) at Fermilab. Detailed simulations with the STRUCT and MARS codes have evaluated the impact of beam loss of 1.6 x 10{sup 14} protons per pulse at 120 GeV, ranging from a single pulse full loss to sustained small fractional loss. It is shown that loss of a single beam pulse at 2.3 MW will result in a catastrophic event: beam pipe destruction, damaged magnets and very high levels of residual radiation inside and outside the tunnel. Acceptable beam loss limits have been determined and robust solutions developed to enable efficient proton beam operation under these constraints.

  8. A non-invasive beam profile monitor for charged particle beams

    SciTech Connect (OSTI)

    Tzoganis, Vasilis, E-mail: vasileios.tzoganis@cockcroft.ac.uk [Cockcroft Institute, Daresbury Sci-Tech, Warrington WA4 4AD (United Kingdom); Department of Physics, University of Liverpool, Liverpool L69 7ZE (United Kingdom); RIKEN Nishina Centre, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Welsch, Carsten P. [Cockcroft Institute, Daresbury Sci-Tech, Warrington WA4 4AD (United Kingdom); Department of Physics, University of Liverpool, Liverpool L69 7ZE (United Kingdom)

    2014-05-19T23:59:59.000Z

    Non-interceptive beam profile monitors are highly desirable in almost all particle accelerators. Such techniques are especially valuable in applications where real time monitoring of the beam properties is required while beam preservation and minimal influence on the vacuum are of the greatest importance. This applies to many kinds of accelerators such as high energy machines where the normal diagnostics cannot withstand the beam's power, medical machines where treatment time is valuable and cannot be allocated to diagnostics and also low energy, low intensity accelerators where the beam's properties are difficult to measure. This paper presents the design of a gas-jet based beam profile monitor which was developed and commissioned at the Cockcroft Institute and can operate in a very large background pressure range from 10{sup ?7} down to below 10{sup ?11} millibars. The functioning principle of the monitor is described and the first experimental results obtained using a 5?keV electron beam are discussed.

  9. Laser Beam Profile Influence on LIBS Analytical Capabilities: Single vs. Multimode Beam

    E-Print Network [OSTI]

    Lednev, Vasily N; Bunkin, Alexey F

    2013-01-01T23:59:59.000Z

    Single vs. multimode laser beams have been compared for laser ablation on steel samples. Laser plasma properties and analytical capabilities (precision, limit of detection) were used as key parameters for comparison. Peak fluence at focal spot has been observed to be higher for Gaussian beam despite ~14-fold lower pulse energy. A comparison of Gaussian and multimode beams with equal energy was carried out in order to estimate influence of beam profile only. Single mode lasing (Gaussian beam) results in better reproducibility of analytical signals compared to multimode lasing while laser energy reproducibility was the same for both cases. Precision improvements were attributed to more stable laser ablation due to better reproducibility of beam profile fluence at laser spot. Plasma temperature and electron density were higher for Gaussian laser beam. Calibration curves were obtained for four elements under study (Cr, Mn, Si, Cu). Two sampling (drilling and scanning procedures) and two optical detection schemes ...

  10. World record neutron beam at Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    World record neutron beam at LANL World record neutron beam at Los Alamos National Laboratory Scientists have created the largest neutron beam ever made by a short-pulse laser,...

  11. Horizontal Beam Tubes - HFIR Technical Parameters | ORNL Neutron...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beam Tubes The reactor has four horizontal beam tubes that supply the neutrons to the neutron scattering instruments. Details for each beam tube and instrument can be found on...

  12. Intense ion beam propagation in a reactor sized chamber

    E-Print Network [OSTI]

    Vay, J.L.; Deutsch, C.

    2000-01-01T23:59:59.000Z

    beams in a heavy ion fusion reactor chamber filled with lowIon Fusion, Intense Ion Beams, Reaction Chamber. P.A.C.S.heavy ion beam propagation in the reaction chamber, Fus.

  13. michael smith ornlradioactive beams: equipment & techniques recoil separators

    E-Print Network [OSTI]

    michael smith ornlradioactive beams: equipment & techniques recoil separators approach! · directly Smith, Rolfs, Barnes NIMA306 (1991) 233 #12;michael smith ornlradioactive beams: equipment & techniques;michael smith ornlradioactive beams: equipment & techniques recoil separators proof of concept with 12C

  14. The CERN Beam Interlock System: Principle and Operational Experience

    E-Print Network [OSTI]

    Puccio, B; Kwiatkowski, M; Romera Ramirez, I; Todd, B

    2010-01-01T23:59:59.000Z

    A complex Machine Protection System has been designed to protect the LHC machine from an accidental release of the beam energy, with about 20 subsystems providing status information to the Beam Interlock System that is the backbone of machine protection. Only if the subsystems are in the correct state for beam operation, the Beam Interlock System receives a status flag and beam can be injected into LHC (Large Hadron Collider). The Beam Interlock System also relays commands from the connected subsystems in case of failure for triggering the LHC Beam Dumping System. To maintain the required level of safety of the Beam Interlock System, the performance of the key components is verified before every fill of the machine and validated after every emergency beam dump before beam operation is allowed to continue. This includes all critical paths, starting from the inputs from connected systems triggering a beam dump request, followed by the correct interruption and propagation sequence of the two redundant beam permi...

  15. Vibration suppression, stabilization, motion planning and tracking for flexible beams

    E-Print Network [OSTI]

    Siranosian, Antranik Antonio

    2009-01-01T23:59:59.000Z

    Target System . . . . 3.2.3 Flexible Beams . . . 3.3 MotionPlanning and Tracking for Flexible Beams A Dissertationand De?ection Angle for Flexible Beams,” ASME Journal of

  16. Wideband Precision Current Transformer for the Magnet Current of the Beam Extraction Kicker Magnet of the Large Hadron Collider

    E-Print Network [OSTI]

    Gräwer, G

    2004-01-01T23:59:59.000Z

    The LHC beam extraction system is composed of 15 fast kicker magnets per beam to extract the particles in one turn of the collider and to safely dispose them on external absorbers. Each magnet is powered by a separate pulse generator. The generator produces a magnet current pulse with 3 us rise time, 20 kA amplitude and 1.8 ms fall time, of which 90 us are needed to dump the beam. The beam extraction system requires a high level of reliability. To detect any change in the magnet current characteristics, which might indicate a slow degradation of the pulse generator, a high precision wideband current transformer will be installed. For redundancy reasons, the results obtained with this device will be cross-checked with a Rogowski coil, installed adjacent to the transformer. A prototype transformer has been successfully tested at nominal current levels and showed satisfactory results compared with the output of a high frequency resistive coaxial shunt. The annular core of the ring type transformer is composed of...

  17. Electrostatic wire for stabilizing a charged particle beam

    DOE Patents [OSTI]

    Prono, Daniel S. (Livermore, CA); Caporaso, George J. (Livermore, CA); Briggs, Richard J. (Livermore, CA)

    1985-01-01T23:59:59.000Z

    In combination with a charged particle beam generator and accelerator, apparatus and method are provided for stabilizing a beam of electrically charged particles. A guiding means, disposed within the particle beam, has an electric charge induced upon it by the charged particle beam. Because the sign of the electric charge on the guiding means and the sign of the particle beam are opposite, the particles are attracted toward and cluster around the guiding means to thereby stabilize the particle beam as it travels.

  18. Stimulated Raman Scattering and Nonlinear Focusing of High-Power Laser Beams Propagating in Water

    E-Print Network [OSTI]

    Hafizi, B; Penano, J R; Gordon, D F; Jones, T G; Helle, M H; Kaganovich, D

    2015-01-01T23:59:59.000Z

    The physical processes associated with propagation of a high-power (power > critical power for self-focusing) laser beam in water include nonlinear focusing, stimulated Raman scattering (SRS), optical breakdown and plasma formation. The interplay between nonlinear focusing and SRS is analyzed for cases where a significant portion of the pump power is channeled into the Stokes wave. Propagation simulations and an analytical model demonstrate that the Stokes wave can re-focus the pump wave after the power in the latter falls below the critical power. It is shown that this novel focusing mechanism is distinct from cross-phase focusing. While discussed here in the context of propagation in water, the gain-focusing phenomenon is general to any medium supporting nonlinear focusing and stimulated forward Raman scattering.

  19. ar ion beam: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the ion optical code IBSimu. The simulations predict self-consistently the triangular and hollow beam structures which are often observed experimentally with ECRIS ion beams. The...

  20. argon ion beam: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the ion optical code IBSimu. The simulations predict self-consistently the triangular and hollow beam structures which are often observed experimentally with ECRIS ion beams. The...

  1. Long Plasma Source for Heavy Ion Beam Charge Neutralization

    E-Print Network [OSTI]

    Efthimion, P.C.

    2009-01-01T23:59:59.000Z

    neutralizing plasma column the heavy ion beam can focus to aPlasmas are a source of unbound electrons for charge neutralizing intense heavy ion beams to focus

  2. Beam manipulation by self-wakefield at ATF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Committee and the ATF Users' Meetings, April 26 - 27, 2012 Outline 1. Enhanced Transformer Ratio demonstration (wakefield mapping with the shaped beam) 2. Tunable beam energy...

  3. Fuel Target Implosion in Ion beam Inertial Confinement Fusion

    E-Print Network [OSTI]

    Kawata, Shigeo

    2015-01-01T23:59:59.000Z

    The numerical results for the fuel target implosion are presented in order to clarify the target physics in ion beam inertial fusion. The numerical analyses are performed for a direct-driven ion beam target. In the paper the following issues are studied: the beam obliquely incidence on the target surface, the plasma effect on the beam-stopping power, the beam particle energy, the beam time duration, the target radius, the beam input energy and the non-uniformity effect on the fuel target performance. In this paper the beam ions are protons.

  4. Ion beam assisted deposition of thermal barrier coatings

    DOE Patents [OSTI]

    Youchison, Dennis L. (Albuquerque, NM); McDonald, Jimmie M. (Albuquerque, NM); Lutz, Thomas J. (Albuquerque, NM); Gallis, Michail A. (Albuquerque, NM)

    2010-11-23T23:59:59.000Z

    Methods and apparatus for depositing thermal barrier coatings on gas turbine blades and vanes using Electron Beam Physical Vapor Deposition (EBPVD) combined with Ion Beam Assisted Deposition (IBAD).

  5. Faraday cup with nanosecond response and adjustable impedance for fast electron beam characterization

    SciTech Connect (OSTI)

    Hu Jing; Rovey, Joshua L. [Missouri University of Science and Technology (Formerly University of Missouri-Rolla), Rolla, Missouri 65409 (United States)

    2011-07-15T23:59:59.000Z

    A movable Faraday cup design with simple structure and adjustable impedance is described in this work. This Faraday cup has external adjustable shunt resistance for self-biased measurement setup and 50 {Omega} characteristic impedance to match with 50 {Omega} standard BNC coaxial cable and vacuum feedthroughs for nanosecond-level pulse signal measurements. Adjustable shunt resistance allows self-biased measurements to be quickly acquired to determine the electron energy distribution function. The performance of the Faraday cup is validated by tests of response time and amplitude of output signal. When compared with a reference source, the percent difference of the Faraday cup signal fall time is less than 10% for fall times greater than 10 ns. The percent difference of the Faraday cup signal pulse width is below 6.7% for pulse widths greater than 10 ns. A pseudospark-generated electron beam is used to compare the amplitude of the Faraday cup signal with a calibrated F-70 commercial current transformer. The error of the Faraday cup output amplitude is below 10% for the 4-14 kV tested pseudospark voltages. The main benefit of this Faraday cup is demonstrated by adjusting the external shunt resistance and performing the self-biased method for obtaining the electron energy distribution function. Results from a 4 kV pseudospark discharge indicate a ''double-humped'' energy distribution.

  6. Physics with Rare Isotope Beams

    SciTech Connect (OSTI)

    Segel, Ralph E. [Northwestern University] [Northwestern University

    2013-11-08T23:59:59.000Z

    Using stable and radioactive beams provided by ATLAS nuclear reactions of special interest in astrophysics have been studied with emphasis on breakout from the hot CNO cycle to the rp-process. The masses of nuclear fragments provided by a strong fission source have been measured in order to help trace the path of the r process. 8Li ions produced by the d(7Li,8Li)n reaction have been trapped and the electrons and alphas emitted in the ensuing beta-decay measured. The neutrino directions were therefore determined, which leads to a measurement of the electron-neutrino correlation. The energies and kinematics are such that a sensitive search for any tensor admixture could be performed and an upper limit of 0.6% was placed on any such admixture. Earlier work on the electromagnetic form factors of the proton was extended. Graduate students were active participants in all of these eperiments, which formed the basis for six PhD theses.

  7. Short rise time intense electron beam generator

    DOE Patents [OSTI]

    Olson, Craig L. (Albuquerque, NM)

    1987-01-01T23:59:59.000Z

    A generator for producing an intense relativistic electron beam having a subnanosecond current rise time includes a conventional generator of intense relativistic electrons feeding into a short electrically conductive drift tube including a cavity containing a working gas at a low enough pressure to prevent the input beam from significantly ionizing the working gas. Ionizing means such as a laser simultaneously ionize the entire volume of working gas in the cavity to generate an output beam having a rise time less than one nanosecond.

  8. Short rise time intense electron beam generator

    DOE Patents [OSTI]

    Olson, C.L.

    1984-03-16T23:59:59.000Z

    A generator for producing an intense relativisitc electron beam having a subnanosecond current rise time includes a conventional generator of intense relativistic electrons feeding into a short electrically conductive drift tube including a cavity containing a working gas at a low enough pressure to prevent the input beam from significantly ionizing the working gas. Ionizing means such as a laser simultaneously ionize the entire volume of working gas in the cavity to generate an output beam having a rise time less than one nanosecond.

  9. Injected Beam Dynamics in SPEAR3

    SciTech Connect (OSTI)

    Corbett, Jeff; /SLAC; Fisher, Alan; /SLAC; Huang, Xiaobiao; /SLAC; Safranek, James; /SLAC; Westerman, Stuart; /SLAC; Cheng, Weixing; /Brookhaven; Mok, Walter; /Unlisted

    2012-06-21T23:59:59.000Z

    For the top-off operation it is important to understand the time evolution of charge injected into the storage ring. The large-amplitude horizontal oscillation quickly filaments and decoheres, and in some cases exhibits non-linear x-y coupling before damping to the stored orbit. Similarly, in the longitudinal dimension, any mismatch in beam arrival time, beam energy or phase-space results in damped, non-linear synchrotron oscillations. In this paper we report on measurements of injection beam dynamics in the transverse and longitudinal planes using turn-by-turn BPMs, a fast-gated, image-intensified CCD camera and a Hamamatsu C5680 streak camera.

  10. Intense steady state electron beam generator

    DOE Patents [OSTI]

    Hershcovitch, A.; Kovarik, V.J.; Prelec, K.

    1990-07-17T23:59:59.000Z

    An intense, steady state, low emittance electron beam generator is formed by operating a hollow cathode discharge plasma source at critical levels in combination with an extraction electrode and a target electrode that are operable to extract a beam of fast primary electrons from the plasma source through a negatively biased grid that is critically operated to repel bulk electrons toward the plasma source while allowing the fast primary electrons to move toward the target in the desired beam that can be successfully transported for relatively large distances, such as one or more meters away from the plasma source. 2 figs.

  11. Energy-beam-driven rapid fabrication system

    DOE Patents [OSTI]

    Keicher, David M. (Albuquerque, NM); Atwood, Clinton L. (Albuquerque, NM); Greene, Donald L. (Corrales, NM); Griffith, Michelle L. (Albuquerque, NM); Harwell, Lane D. (Albuquerque, NM); Jeantette, Francisco P. (Albuquerque, NM); Romero, Joseph A. (Albuquerque, NM); Schanwald, Lee P. (Albuquerque, NM); Schmale, David T. (Albuquerque, NM)

    2002-01-01T23:59:59.000Z

    An energy beam driven rapid fabrication system, in which an energy beam strikes a growth surface to form a molten puddle thereon. Feed powder is then injected into the molten puddle from a converging flow of feed powder. A portion of the feed powder becomes incorporated into the molten puddle, forcing some of the puddle contents to freeze on the growth surface, thereby adding an additional layer of material. By scanning the energy beam and the converging flow of feed powder across the growth surface, complex three-dimensional shapes can be formed, ready or nearly ready for use. Nearly any class of material can be fabricated using this system.

  12. Automated beam steering using optimal control

    SciTech Connect (OSTI)

    Allen, C. K. (Christopher K.)

    2004-01-01T23:59:59.000Z

    We present a steering algorithm which, with the aid of a model, allows the user to specify beam behavior throughout a beamline, rather than just at specified beam position monitor (BPM) locations. The model is used primarily to compute the values of the beam phase vectors from BPM measurements, and to define cost functions that describe the steering objectives. The steering problem is formulated as constrained optimization problem; however, by applying optimal control theory we can reduce it to an unconstrained optimization whose dimension is the number of control signals.

  13. Fusion Induced by Radioactive Ion Beams

    E-Print Network [OSTI]

    J. F. Liang; C. Signorini

    2005-04-26T23:59:59.000Z

    The use of radioactive beams opens a new frontier for fusion studies. The coupling to the continuum can be explored with very loosely bound nuclei. Experiments were performed with beams of nuclei at or near the proton and neutron drip-lines to measure fusion and associated reactions in the vicinity of the Coulomb barrier. In addition, the fusion yield is predicted to be enhanced in reactions involving very neutron-rich unstable nuclei. Experimental measurements were carried out to investigate if it is feasible to use such beams to produce new heavy elements. The current status of these experimental activities is given in this review.

  14. Real Beamline Optics from a Synthetic Beam

    SciTech Connect (OSTI)

    Ryan Bodenstein,Michael Tiefenback,Yves Roblin

    2010-05-01T23:59:59.000Z

    The Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab can be described as a series of concatenated beamlines. Methods used to measure the Twiss parameters in closed orbit machines are not applicable in such open ended systems. We are using properly selected sets of real orbits in the accelerator, as one would for numerical analysis. The evolution of these trajectories along the beamline models the behavior of a synthetic beam which deterministically supplements beam profile-based Twiss parameter measurements and optimizes the efficiency of beamline tuning. Examples will be presented alongside a description of the process.

  15. Acoustics of finite-aperture vortex beams

    E-Print Network [OSTI]

    Mitri, F G

    2014-01-01T23:59:59.000Z

    A method based on the Rayleigh-Sommerfeld surface integral is provided, which makes it feasible to rigorously model, evaluate and compute the acoustic scattering and other mechanical effects of finite-aperture vortex beams such as the acoustic radiation force and torque on a viscoelastic sphere in various applications in acoustic tweezers and microfluidics, particle entrapment, manipulation and rotation. Partial-wave series expansions are derived for the incident field of acoustic spiraling (vortex) beams, comprising high-order Bessel and Bessel-Gauss beams.

  16. Non-Vacuum Electron Beam Welding

    SciTech Connect (OSTI)

    Hershcovitch, Ady

    2007-01-31T23:59:59.000Z

    Original objectives of CRADA number BNL-01-03 between BNL and Acceleron, Inc., were to further develop the Plasma Window concept (a BNL invention covered by US Patent number 5,578,831), mate the Plasma Window to an existing electron beam welder to perform in-air electron beam welding, and mount the novel nonvacuum electron beam welder on a robot arm. Except for the last objective, all other goals were met or exceeded. Plasma Window design and operation was enhanced during the project, and it was successfully mated to a conventional4 kW electron beam welder. Unprecedented high quality non-vacuum electron beam . welding was demonstrated. Additionally, a new invention the Plasma Shield (US Patent number 7,075,030) that chemically and thermally shields a target object was set forth. Great interest in the new technology was shown by a number of industries and three arcs were sold for experimental use. However, the welding industry requested demonstration of high speed welding, which requires 100 kW electron beam welders. The cost of such a welder involved the need for additional funding. Therefore, some of the effort was directed towards Plasma Shield development. Although relatively a small portion of the R&D effort was spent on the Plasma Shield, some very encouraging results were obtained. Inair Plasma Shield was demonstrated. With only a partial shield, enhanced vacuum separation and cleaner welds were realized. And, electron beam propagation in atmosphere improved by a factor of about 3. Benefits to industry are the introduction of two new technologies. BNL benefited from licensing fee cash, from partial payment for employee salary, and from a new patent In addition to financial benefits, a new technology for physics studies was developed. Recommendations for future work are to develop an under-water plasma shield, perform welding with high-power electron beam:s, carry out other plasma shielded electron beam and laser processes. Potential benefits from further R&D are that various processes involving electron ion and laser beams that have now restrictions can, with the Plasma Shield be performed in practically any environment. For example, electron beam and laser welding can be performed under water, as well as, in situ repair of ship and nuclear reactor components. The plasma shield results in both thermal (since the plasma is hotter than the environment) and chemical shielding. The latter feature brings about in-vacuum process purity out of vacuum, and the thermal shielding aspect results in higher production rates.

  17. Science and engineering research semester internship, Fall 1996, abstracts and research papers

    SciTech Connect (OSTI)

    Williams, B.; Brown, E.; Davis, M.; Downs, J.; Fox, K.; Hayden, C.; Jacobsen, E.; Kraut, E.; Lawrence, S.; Legler, T.; Oram, S.; Ragland, S.

    1996-12-01T23:59:59.000Z

    This document consists of abstracts and research papers from the science and engineering research semester internship fall 1996 at Lawrence Livermore National Laboratory.

  18. Analysis on Falls Death Crude Rate in Western Region of United States

    E-Print Network [OSTI]

    Ng, Lung Fai

    2012-01-01T23:59:59.000Z

    Falls Death Crude Rate in Western Region of United States AFalls Death Crude Rate in Western Region of United States by

  19. Sustainability E-Newsletter Fall/Winter 2013-2014 Like "Office of

    E-Print Network [OSTI]

    Alpay, S. Pamir

    Sustainability E-Newsletter Fall/Winter 2013-2014 Like "Office of Environmental Policy" on FacebookDay..........................................................................................2 Campus Sustainability Day our Sustainability Coordinators......................................................6 Campus

  20. Course Syllabus for MA 16100, Fall 2014 Course Objectives: 1. To ...

    E-Print Network [OSTI]

    2014-09-17T23:59:59.000Z

    Course Syllabus for MA 16100, Fall 2014. Course Objectives: 1. To compute limits and to apply limit laws. 2. To apply rules of differentiation to compute ...